Index: head/sys/cam/cam_periph.c =================================================================== --- head/sys/cam/cam_periph.c (revision 260540) +++ head/sys/cam/cam_periph.c (revision 260541) @@ -1,1794 +1,1805 @@ /*- * Common functions for CAM "type" (peripheral) drivers. * * Copyright (c) 1997, 1998 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired, path_id_t pathid, target_id_t target, lun_id_t lun); static u_int camperiphunit(struct periph_driver *p_drv, path_id_t pathid, target_id_t target, lun_id_t lun); static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb); static void camperiphfree(struct cam_periph *periph); static int camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string); static int camperiphscsisenseerror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string); static int nperiph_drivers; static int initialized = 0; struct periph_driver **periph_drivers; static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers"); static int periph_selto_delay = 1000; TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay); static int periph_noresrc_delay = 500; TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay); static int periph_busy_delay = 500; TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay); void periphdriver_register(void *data) { struct periph_driver *drv = (struct periph_driver *)data; struct periph_driver **newdrivers, **old; int ndrivers; ndrivers = nperiph_drivers + 2; newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH, M_WAITOK); if (periph_drivers) bcopy(periph_drivers, newdrivers, sizeof(*newdrivers) * nperiph_drivers); newdrivers[nperiph_drivers] = drv; newdrivers[nperiph_drivers + 1] = NULL; old = periph_drivers; periph_drivers = newdrivers; if (old) free(old, M_CAMPERIPH); nperiph_drivers++; /* If driver marked as early or it is late now, initialize it. */ if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || initialized > 1) (*drv->init)(); } void periphdriver_init(int level) { int i, early; initialized = max(initialized, level); for (i = 0; periph_drivers[i] != NULL; i++) { early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2; if (early == initialized) (*periph_drivers[i]->init)(); } } cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *path, ac_callback_t *ac_callback, ac_code code, void *arg) { struct periph_driver **p_drv; struct cam_sim *sim; struct cam_periph *periph; struct cam_periph *cur_periph; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; cam_status status; u_int init_level; init_level = 0; /* * Handle Hot-Plug scenarios. If there is already a peripheral * of our type assigned to this path, we are likely waiting for * final close on an old, invalidated, peripheral. If this is * the case, queue up a deferred call to the peripheral's async * handler. If it looks like a mistaken re-allocation, complain. */ if ((periph = cam_periph_find(path, name)) != NULL) { if ((periph->flags & CAM_PERIPH_INVALID) != 0 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; periph->deferred_callback = ac_callback; periph->deferred_ac = code; return (CAM_REQ_INPROG); } else { printf("cam_periph_alloc: attempt to re-allocate " "valid device %s%d rejected flags %#x " "refcount %d\n", periph->periph_name, periph->unit_number, periph->flags, periph->refcount); } return (CAM_REQ_INVALID); } periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH, M_NOWAIT|M_ZERO); if (periph == NULL) return (CAM_RESRC_UNAVAIL); init_level++; sim = xpt_path_sim(path); path_id = xpt_path_path_id(path); target_id = xpt_path_target_id(path); lun_id = xpt_path_lun_id(path); periph->periph_start = periph_start; periph->periph_dtor = periph_dtor; periph->periph_oninval = periph_oninvalidate; periph->type = type; periph->periph_name = name; periph->scheduled_priority = CAM_PRIORITY_NONE; periph->immediate_priority = CAM_PRIORITY_NONE; periph->refcount = 1; /* Dropped by invalidation. */ periph->sim = sim; SLIST_INIT(&periph->ccb_list); status = xpt_create_path(&path, periph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) goto failure; periph->path = path; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, name) == 0) break; } if (*p_drv == NULL) { printf("cam_periph_alloc: invalid periph name '%s'\n", name); xpt_unlock_buses(); xpt_free_path(periph->path); free(periph, M_CAMPERIPH); return (CAM_REQ_INVALID); } periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id); cur_periph = TAILQ_FIRST(&(*p_drv)->units); while (cur_periph != NULL && cur_periph->unit_number < periph->unit_number) cur_periph = TAILQ_NEXT(cur_periph, unit_links); if (cur_periph != NULL) { KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list")); TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); } else { TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); (*p_drv)->generation++; } xpt_unlock_buses(); init_level++; status = xpt_add_periph(periph); if (status != CAM_REQ_CMP) goto failure; init_level++; CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n")); status = periph_ctor(periph, arg); if (status == CAM_REQ_CMP) init_level++; failure: switch (init_level) { case 4: /* Initialized successfully */ break; case 3: CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); xpt_remove_periph(periph); /* FALLTHROUGH */ case 2: xpt_lock_buses(); TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); xpt_unlock_buses(); xpt_free_path(periph->path); /* FALLTHROUGH */ case 1: free(periph, M_CAMPERIPH); /* FALLTHROUGH */ case 0: /* No cleanup to perform. */ break; default: panic("%s: Unknown init level", __func__); } return(status); } /* * Find a peripheral structure with the specified path, target, lun, * and (optionally) type. If the name is NULL, this function will return * the first peripheral driver that matches the specified path. */ struct cam_periph * cam_periph_find(struct cam_path *path, char *name) { struct periph_driver **p_drv; struct cam_periph *periph; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) continue; TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { if (xpt_path_comp(periph->path, path) == 0) { xpt_unlock_buses(); cam_periph_assert(periph, MA_OWNED); return(periph); } } if (name != NULL) { xpt_unlock_buses(); return(NULL); } } xpt_unlock_buses(); return(NULL); } /* * Find peripheral driver instances attached to the specified path. */ int cam_periph_list(struct cam_path *path, struct sbuf *sb) { struct sbuf local_sb; struct periph_driver **p_drv; struct cam_periph *periph; int count; int sbuf_alloc_len; sbuf_alloc_len = 16; retry: sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN); count = 0; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { if (xpt_path_comp(periph->path, path) != 0) continue; if (sbuf_len(&local_sb) != 0) sbuf_cat(&local_sb, ","); sbuf_printf(&local_sb, "%s%d", periph->periph_name, periph->unit_number); if (sbuf_error(&local_sb) == ENOMEM) { sbuf_alloc_len *= 2; xpt_unlock_buses(); sbuf_delete(&local_sb); goto retry; } count++; } } xpt_unlock_buses(); sbuf_finish(&local_sb); sbuf_cpy(sb, sbuf_data(&local_sb)); sbuf_delete(&local_sb); return (count); } cam_status cam_periph_acquire(struct cam_periph *periph) { cam_status status; status = CAM_REQ_CMP_ERR; if (periph == NULL) return (status); xpt_lock_buses(); if ((periph->flags & CAM_PERIPH_INVALID) == 0) { periph->refcount++; status = CAM_REQ_CMP; } xpt_unlock_buses(); return (status); } void +cam_periph_doacquire(struct cam_periph *periph) +{ + + xpt_lock_buses(); + KASSERT(periph->refcount >= 1, + ("cam_periph_doacquire() with refcount == %d", periph->refcount)); + periph->refcount++; + xpt_unlock_buses(); +} + +void cam_periph_release_locked_buses(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); KASSERT(periph->refcount >= 1, ("periph->refcount >= 1")); if (--periph->refcount == 0) camperiphfree(periph); } void cam_periph_release_locked(struct cam_periph *periph) { if (periph == NULL) return; xpt_lock_buses(); cam_periph_release_locked_buses(periph); xpt_unlock_buses(); } void cam_periph_release(struct cam_periph *periph) { struct mtx *mtx; if (periph == NULL) return; cam_periph_assert(periph, MA_NOTOWNED); mtx = cam_periph_mtx(periph); mtx_lock(mtx); cam_periph_release_locked(periph); mtx_unlock(mtx); } int cam_periph_hold(struct cam_periph *periph, int priority) { int error; /* * Increment the reference count on the peripheral * while we wait for our lock attempt to succeed * to ensure the peripheral doesn't disappear out * from user us while we sleep. */ if (cam_periph_acquire(periph) != CAM_REQ_CMP) return (ENXIO); cam_periph_assert(periph, MA_OWNED); while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { periph->flags |= CAM_PERIPH_LOCK_WANTED; if ((error = cam_periph_sleep(periph, periph, priority, "caplck", 0)) != 0) { cam_periph_release_locked(periph); return (error); } if (periph->flags & CAM_PERIPH_INVALID) { cam_periph_release_locked(periph); return (ENXIO); } } periph->flags |= CAM_PERIPH_LOCKED; return (0); } void cam_periph_unhold(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); periph->flags &= ~CAM_PERIPH_LOCKED; if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { periph->flags &= ~CAM_PERIPH_LOCK_WANTED; wakeup(periph); } cam_periph_release_locked(periph); } /* * Look for the next unit number that is not currently in use for this * peripheral type starting at "newunit". Also exclude unit numbers that * are reserved by for future "hardwiring" unless we already know that this * is a potential wired device. Only assume that the device is "wired" the * first time through the loop since after that we'll be looking at unit * numbers that did not match a wiring entry. */ static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired, path_id_t pathid, target_id_t target, lun_id_t lun) { struct cam_periph *periph; char *periph_name; int i, val, dunit, r; const char *dname, *strval; periph_name = p_drv->driver_name; for (;;newunit++) { for (periph = TAILQ_FIRST(&p_drv->units); periph != NULL && periph->unit_number != newunit; periph = TAILQ_NEXT(periph, unit_links)) ; if (periph != NULL && periph->unit_number == newunit) { if (wired != 0) { xpt_print(periph->path, "Duplicate Wired " "Device entry!\n"); xpt_print(periph->path, "Second device (%s " "device at scbus%d target %d lun %d) will " "not be wired\n", periph_name, pathid, target, lun); wired = 0; } continue; } if (wired) break; /* * Don't match entries like "da 4" as a wired down * device, but do match entries like "da 4 target 5" * or even "da 4 scbus 1". */ i = 0; dname = periph_name; for (;;) { r = resource_find_dev(&i, dname, &dunit, NULL, NULL); if (r != 0) break; /* if no "target" and no specific scbus, skip */ if (resource_int_value(dname, dunit, "target", &val) && (resource_string_value(dname, dunit, "at",&strval)|| strcmp(strval, "scbus") == 0)) continue; if (newunit == dunit) break; } if (r != 0) break; } return (newunit); } static u_int camperiphunit(struct periph_driver *p_drv, path_id_t pathid, target_id_t target, lun_id_t lun) { u_int unit; int wired, i, val, dunit; const char *dname, *strval; char pathbuf[32], *periph_name; periph_name = p_drv->driver_name; snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid); unit = 0; i = 0; dname = periph_name; for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0; wired = 0) { if (resource_string_value(dname, dunit, "at", &strval) == 0) { if (strcmp(strval, pathbuf) != 0) continue; wired++; } if (resource_int_value(dname, dunit, "target", &val) == 0) { if (val != target) continue; wired++; } if (resource_int_value(dname, dunit, "lun", &val) == 0) { if (val != lun) continue; wired++; } if (wired != 0) { unit = dunit; break; } } /* * Either start from 0 looking for the next unit or from * the unit number given in the resource config. This way, * if we have wildcard matches, we don't return the same * unit number twice. */ unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun); return (unit); } void cam_periph_invalidate(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); /* * We only call this routine the first time a peripheral is * invalidated. */ if ((periph->flags & CAM_PERIPH_INVALID) != 0) return; CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n")); if (periph->flags & CAM_PERIPH_ANNOUNCED) xpt_denounce_periph(periph); periph->flags |= CAM_PERIPH_INVALID; periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; if (periph->periph_oninval != NULL) periph->periph_oninval(periph); cam_periph_release_locked(periph); } static void camperiphfree(struct cam_periph *periph) { struct periph_driver **p_drv; cam_periph_assert(periph, MA_OWNED); KASSERT(periph->periph_allocating == 0, ("%s%d: freed while allocating", periph->periph_name, periph->unit_number)); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) break; } if (*p_drv == NULL) { printf("camperiphfree: attempt to free non-existant periph\n"); return; } /* * We need to set this flag before dropping the topology lock, to * let anyone who is traversing the list that this peripheral is * about to be freed, and there will be no more reference count * checks. */ periph->flags |= CAM_PERIPH_FREE; /* * The peripheral destructor semantics dictate calling with only the * SIM mutex held. Since it might sleep, it should not be called * with the topology lock held. */ xpt_unlock_buses(); /* * We need to call the peripheral destructor prior to removing the * peripheral from the list. Otherwise, we risk running into a * scenario where the peripheral unit number may get reused * (because it has been removed from the list), but some resources * used by the peripheral are still hanging around. In particular, * the devfs nodes used by some peripherals like the pass(4) driver * aren't fully cleaned up until the destructor is run. If the * unit number is reused before the devfs instance is fully gone, * devfs will panic. */ if (periph->periph_dtor != NULL) periph->periph_dtor(periph); /* * The peripheral list is protected by the topology lock. */ xpt_lock_buses(); TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); (*p_drv)->generation++; xpt_remove_periph(periph); xpt_unlock_buses(); if (periph->flags & CAM_PERIPH_ANNOUNCED) { xpt_print(periph->path, "Periph destroyed\n"); } else CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { union ccb ccb; void *arg; switch (periph->deferred_ac) { case AC_FOUND_DEVICE: ccb.ccb_h.func_code = XPT_GDEV_TYPE; xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); xpt_action(&ccb); arg = &ccb; break; case AC_PATH_REGISTERED: ccb.ccb_h.func_code = XPT_PATH_INQ; xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); xpt_action(&ccb); arg = &ccb; break; default: arg = NULL; break; } periph->deferred_callback(NULL, periph->deferred_ac, periph->path, arg); } xpt_free_path(periph->path); free(periph, M_CAMPERIPH); xpt_lock_buses(); } /* * Map user virtual pointers into kernel virtual address space, so we can * access the memory. This is now a generic function that centralizes most * of the sanity checks on the data flags, if any. * This also only works for up to MAXPHYS memory. Since we use * buffers to map stuff in and out, we're limited to the buffer size. */ int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) { int numbufs, i, j; int flags[CAM_PERIPH_MAXMAPS]; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; u_int32_t lengths[CAM_PERIPH_MAXMAPS]; u_int32_t dirs[CAM_PERIPH_MAXMAPS]; /* Some controllers may not be able to handle more data. */ size_t maxmap = DFLTPHYS; switch(ccb->ccb_h.func_code) { case XPT_DEV_MATCH: if (ccb->cdm.match_buf_len == 0) { printf("cam_periph_mapmem: invalid match buffer " "length 0\n"); return(EINVAL); } if (ccb->cdm.pattern_buf_len > 0) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; lengths[0] = ccb->cdm.pattern_buf_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; lengths[1] = ccb->cdm.match_buf_len; dirs[1] = CAM_DIR_IN; numbufs = 2; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; lengths[0] = ccb->cdm.match_buf_len; dirs[0] = CAM_DIR_IN; numbufs = 1; } /* * This request will not go to the hardware, no reason * to be so strict. vmapbuf() is able to map up to MAXPHYS. */ maxmap = MAXPHYS; break; case XPT_SCSI_IO: case XPT_CONT_TARGET_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) return (EINVAL); data_ptrs[0] = &ccb->csio.data_ptr; lengths[0] = ccb->csio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_ATA_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) return (EINVAL); data_ptrs[0] = &ccb->ataio.data_ptr; lengths[0] = ccb->ataio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_SMP_IO: data_ptrs[0] = &ccb->smpio.smp_request; lengths[0] = ccb->smpio.smp_request_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = &ccb->smpio.smp_response; lengths[1] = ccb->smpio.smp_response_len; dirs[1] = CAM_DIR_IN; numbufs = 2; break; case XPT_DEV_ADVINFO: if (ccb->cdai.bufsiz == 0) return (0); data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; lengths[0] = ccb->cdai.bufsiz; dirs[0] = CAM_DIR_IN; numbufs = 1; /* * This request will not go to the hardware, no reason * to be so strict. vmapbuf() is able to map up to MAXPHYS. */ maxmap = MAXPHYS; break; default: return(EINVAL); break; /* NOTREACHED */ } /* * Check the transfer length and permissions first, so we don't * have to unmap any previously mapped buffers. */ for (i = 0; i < numbufs; i++) { flags[i] = 0; /* * The userland data pointer passed in may not be page * aligned. vmapbuf() truncates the address to a page * boundary, so if the address isn't page aligned, we'll * need enough space for the given transfer length, plus * whatever extra space is necessary to make it to the page * boundary. */ if ((lengths[i] + (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > maxmap){ printf("cam_periph_mapmem: attempt to map %lu bytes, " "which is greater than %lu\n", (long)(lengths[i] + (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)), (u_long)maxmap); return(E2BIG); } if (dirs[i] & CAM_DIR_OUT) { flags[i] = BIO_WRITE; } if (dirs[i] & CAM_DIR_IN) { flags[i] = BIO_READ; } } /* * This keeps the the kernel stack of current thread from getting * swapped. In low-memory situations where the kernel stack might * otherwise get swapped out, this holds it and allows the thread * to make progress and release the kernel mapped pages sooner. * * XXX KDM should I use P_NOSWAP instead? */ PHOLD(curproc); for (i = 0; i < numbufs; i++) { /* * Get the buffer. */ mapinfo->bp[i] = getpbuf(NULL); /* save the buffer's data address */ mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data; /* put our pointer in the data slot */ mapinfo->bp[i]->b_data = *data_ptrs[i]; /* set the transfer length, we know it's < MAXPHYS */ mapinfo->bp[i]->b_bufsize = lengths[i]; /* set the direction */ mapinfo->bp[i]->b_iocmd = flags[i]; /* * Map the buffer into kernel memory. * * Note that useracc() alone is not a sufficient test. * vmapbuf() can still fail due to a smaller file mapped * into a larger area of VM, or if userland races against * vmapbuf() after the useracc() check. */ if (vmapbuf(mapinfo->bp[i], 1) < 0) { for (j = 0; j < i; ++j) { *data_ptrs[j] = mapinfo->bp[j]->b_saveaddr; vunmapbuf(mapinfo->bp[j]); relpbuf(mapinfo->bp[j], NULL); } relpbuf(mapinfo->bp[i], NULL); PRELE(curproc); return(EACCES); } /* set our pointer to the new mapped area */ *data_ptrs[i] = mapinfo->bp[i]->b_data; mapinfo->num_bufs_used++; } /* * Now that we've gotten this far, change ownership to the kernel * of the buffers so that we don't run afoul of returning to user * space with locks (on the buffer) held. */ for (i = 0; i < numbufs; i++) { BUF_KERNPROC(mapinfo->bp[i]); } return(0); } /* * Unmap memory segments mapped into kernel virtual address space by * cam_periph_mapmem(). */ void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) { int numbufs, i; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; if (mapinfo->num_bufs_used <= 0) { /* nothing to free and the process wasn't held. */ return; } switch (ccb->ccb_h.func_code) { case XPT_DEV_MATCH: numbufs = min(mapinfo->num_bufs_used, 2); if (numbufs == 1) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; } break; case XPT_SCSI_IO: case XPT_CONT_TARGET_IO: data_ptrs[0] = &ccb->csio.data_ptr; numbufs = min(mapinfo->num_bufs_used, 1); break; case XPT_ATA_IO: data_ptrs[0] = &ccb->ataio.data_ptr; numbufs = min(mapinfo->num_bufs_used, 1); break; case XPT_SMP_IO: numbufs = min(mapinfo->num_bufs_used, 2); data_ptrs[0] = &ccb->smpio.smp_request; data_ptrs[1] = &ccb->smpio.smp_response; break; case XPT_DEV_ADVINFO: numbufs = min(mapinfo->num_bufs_used, 1); data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; break; default: /* allow ourselves to be swapped once again */ PRELE(curproc); return; break; /* NOTREACHED */ } for (i = 0; i < numbufs; i++) { /* Set the user's pointer back to the original value */ *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr; /* unmap the buffer */ vunmapbuf(mapinfo->bp[i]); /* release the buffer */ relpbuf(mapinfo->bp[i], NULL); } /* allow ourselves to be swapped once again */ PRELE(curproc); } void cam_periph_ccbwait(union ccb *ccb) { if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX) || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)) xpt_path_sleep(ccb->ccb_h.path, &ccb->ccb_h.cbfcnp, PRIBIO, "cbwait", 0); } int cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)) { union ccb *ccb; int error; int found; error = found = 0; switch(cmd){ case CAMGETPASSTHRU: ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); ccb->ccb_h.func_code = XPT_GDEVLIST; /* * Basically, the point of this is that we go through * getting the list of devices, until we find a passthrough * device. In the current version of the CAM code, the * only way to determine what type of device we're dealing * with is by its name. */ while (found == 0) { ccb->cgdl.index = 0; ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { /* we want the next device in the list */ xpt_action(ccb); if (strncmp(ccb->cgdl.periph_name, "pass", 4) == 0){ found = 1; break; } } if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && (found == 0)) { ccb->cgdl.periph_name[0] = '\0'; ccb->cgdl.unit_number = 0; break; } } /* copy the result back out */ bcopy(ccb, addr, sizeof(union ccb)); /* and release the ccb */ xpt_release_ccb(ccb); break; default: error = ENOTTY; break; } return(error); } static void cam_periph_done(struct cam_periph *periph, union ccb *done_ccb) { /* Caller will release the CCB */ wakeup(&done_ccb->ccb_h.cbfcnp); } int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds) { int error; xpt_path_assert(ccb->ccb_h.path, MA_OWNED); /* * If the user has supplied a stats structure, and if we understand * this particular type of ccb, record the transaction start. */ if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO || ccb->ccb_h.func_code == XPT_ATA_IO)) devstat_start_transaction(ds, NULL); ccb->ccb_h.cbfcnp = cam_periph_done; xpt_action(ccb); do { cam_periph_ccbwait(ccb); if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) error = 0; else if (error_routine != NULL) error = (*error_routine)(ccb, camflags, sense_flags); else error = 0; } while (error == ERESTART); if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { cam_release_devq(ccb->ccb_h.path, /* relsim_flags */0, /* openings */0, /* timeout */0, /* getcount_only */ FALSE); ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } if (ds != NULL) { if (ccb->ccb_h.func_code == XPT_SCSI_IO) { devstat_end_transaction(ds, ccb->csio.dxfer_len, ccb->csio.tag_action & 0x3, ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ? DEVSTAT_NO_DATA : (ccb->ccb_h.flags & CAM_DIR_OUT) ? DEVSTAT_WRITE : DEVSTAT_READ, NULL, NULL); } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { devstat_end_transaction(ds, ccb->ataio.dxfer_len, ccb->ataio.tag_action & 0x3, ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ? DEVSTAT_NO_DATA : (ccb->ccb_h.flags & CAM_DIR_OUT) ? DEVSTAT_WRITE : DEVSTAT_READ, NULL, NULL); } } return(error); } void cam_freeze_devq(struct cam_path *path) { struct ccb_hdr ccb_h; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_freeze_devq\n")); xpt_setup_ccb(&ccb_h, path, /*priority*/1); ccb_h.func_code = XPT_NOOP; ccb_h.flags = CAM_DEV_QFREEZE; xpt_action((union ccb *)&ccb_h); } u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t openings, u_int32_t arg, int getcount_only) { struct ccb_relsim crs; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_release_devq(%u, %u, %u, %d)\n", relsim_flags, openings, arg, getcount_only)); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; crs.release_flags = relsim_flags; crs.openings = openings; crs.release_timeout = arg; xpt_action((union ccb *)&crs); return (crs.qfrozen_cnt); } #define saved_ccb_ptr ppriv_ptr0 static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb) { union ccb *saved_ccb; cam_status status; struct scsi_start_stop_unit *scsi_cmd; int error_code, sense_key, asc, ascq; scsi_cmd = (struct scsi_start_stop_unit *) &done_ccb->csio.cdb_io.cdb_bytes; status = done_ccb->ccb_h.status; if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (scsi_extract_sense_ccb(done_ccb, &error_code, &sense_key, &asc, &ascq)) { /* * If the error is "invalid field in CDB", * and the load/eject flag is set, turn the * flag off and try again. This is just in * case the drive in question barfs on the * load eject flag. The CAM code should set * the load/eject flag by default for * removable media. */ if ((scsi_cmd->opcode == START_STOP_UNIT) && ((scsi_cmd->how & SSS_LOEJ) != 0) && (asc == 0x24) && (ascq == 0x00)) { scsi_cmd->how &= ~SSS_LOEJ; if (status & CAM_DEV_QFRZN) { cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } xpt_action(done_ccb); goto out; } } if (cam_periph_error(done_ccb, 0, SF_RETRY_UA | SF_NO_PRINT, NULL) == ERESTART) goto out; if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) { cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } } else { /* * If we have successfully taken a device from the not * ready to ready state, re-scan the device and re-get * the inquiry information. Many devices (mostly disks) * don't properly report their inquiry information unless * they are spun up. */ if (scsi_cmd->opcode == START_STOP_UNIT) xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL); } /* * Perform the final retry with the original CCB so that final * error processing is performed by the owner of the CCB. */ saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr; bcopy(saved_ccb, done_ccb, sizeof(*done_ccb)); xpt_free_ccb(saved_ccb); if (done_ccb->ccb_h.cbfcnp != camperiphdone) periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; xpt_action(done_ccb); out: /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); } /* * Generic Async Event handler. Peripheral drivers usually * filter out the events that require personal attention, * and leave the rest to this function. */ void cam_periph_async(struct cam_periph *periph, u_int32_t code, struct cam_path *path, void *arg) { switch (code) { case AC_LOST_DEVICE: cam_periph_invalidate(periph); break; default: break; } } void cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) { struct ccb_getdevstats cgds; xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cgds.ccb_h.func_code = XPT_GDEV_STATS; xpt_action((union ccb *)&cgds); cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); } void cam_periph_freeze_after_event(struct cam_periph *periph, struct timeval* event_time, u_int duration_ms) { struct timeval delta; struct timeval duration_tv; if (!timevalisset(event_time)) return; microtime(&delta); timevalsub(&delta, event_time); duration_tv.tv_sec = duration_ms / 1000; duration_tv.tv_usec = (duration_ms % 1000) * 1000; if (timevalcmp(&delta, &duration_tv, <)) { timevalsub(&duration_tv, &delta); duration_ms = duration_tv.tv_sec * 1000; duration_ms += duration_tv.tv_usec / 1000; cam_freeze_devq(periph->path); cam_release_devq(periph->path, RELSIM_RELEASE_AFTER_TIMEOUT, /*reduction*/0, /*timeout*/duration_ms, /*getcount_only*/0); } } static int camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string) { int error; switch (ccb->csio.scsi_status) { case SCSI_STATUS_OK: case SCSI_STATUS_COND_MET: case SCSI_STATUS_INTERMED: case SCSI_STATUS_INTERMED_COND_MET: error = 0; break; case SCSI_STATUS_CMD_TERMINATED: case SCSI_STATUS_CHECK_COND: error = camperiphscsisenseerror(ccb, orig_ccb, camflags, sense_flags, openings, relsim_flags, timeout, action, action_string); break; case SCSI_STATUS_QUEUE_FULL: { /* no decrement */ struct ccb_getdevstats cgds; /* * First off, find out what the current * transaction counts are. */ xpt_setup_ccb(&cgds.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgds.ccb_h.func_code = XPT_GDEV_STATS; xpt_action((union ccb *)&cgds); /* * If we were the only transaction active, treat * the QUEUE FULL as if it were a BUSY condition. */ if (cgds.dev_active != 0) { int total_openings; /* * Reduce the number of openings to * be 1 less than the amount it took * to get a queue full bounded by the * minimum allowed tag count for this * device. */ total_openings = cgds.dev_active + cgds.dev_openings; *openings = cgds.dev_active; if (*openings < cgds.mintags) *openings = cgds.mintags; if (*openings < total_openings) *relsim_flags = RELSIM_ADJUST_OPENINGS; else { /* * Some devices report queue full for * temporary resource shortages. For * this reason, we allow a minimum * tag count to be entered via a * quirk entry to prevent the queue * count on these devices from falling * to a pessimisticly low value. We * still wait for the next successful * completion, however, before queueing * more transactions to the device. */ *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT; } *timeout = 0; error = ERESTART; *action &= ~SSQ_PRINT_SENSE; break; } /* FALLTHROUGH */ } case SCSI_STATUS_BUSY: /* * Restart the queue after either another * command completes or a 1 second timeout. */ if (ccb->ccb_h.retry_count > 0) { ccb->ccb_h.retry_count--; error = ERESTART; *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT | RELSIM_RELEASE_AFTER_CMDCMPLT; *timeout = 1000; } else { error = EIO; } break; case SCSI_STATUS_RESERV_CONFLICT: default: error = EIO; break; } return (error); } static int camperiphscsisenseerror(union ccb *ccb, union ccb **orig, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string) { struct cam_periph *periph; union ccb *orig_ccb = ccb; int error, recoveryccb; periph = xpt_path_periph(ccb->ccb_h.path); recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone); if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) { /* * If error recovery is already in progress, don't attempt * to process this error, but requeue it unconditionally * and attempt to process it once error recovery has * completed. This failed command is probably related to * the error that caused the currently active error recovery * action so our current recovery efforts should also * address this command. Be aware that the error recovery * code assumes that only one recovery action is in progress * on a particular peripheral instance at any given time * (e.g. only one saved CCB for error recovery) so it is * imperitive that we don't violate this assumption. */ error = ERESTART; *action &= ~SSQ_PRINT_SENSE; } else { scsi_sense_action err_action; struct ccb_getdev cgd; /* * Grab the inquiry data for this device. */ xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); err_action = scsi_error_action(&ccb->csio, &cgd.inq_data, sense_flags); error = err_action & SS_ERRMASK; /* * Do not autostart sequential access devices * to avoid unexpected tape loading. */ if ((err_action & SS_MASK) == SS_START && SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) { *action_string = "Will not autostart a " "sequential access device"; goto sense_error_done; } /* * Avoid recovery recursion if recovery action is the same. */ if ((err_action & SS_MASK) >= SS_START && recoveryccb) { if (((err_action & SS_MASK) == SS_START && ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) || ((err_action & SS_MASK) == SS_TUR && (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) { err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO; *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; *timeout = 500; } } /* * If the recovery action will consume a retry, * make sure we actually have retries available. */ if ((err_action & SSQ_DECREMENT_COUNT) != 0) { if (ccb->ccb_h.retry_count > 0 && (periph->flags & CAM_PERIPH_INVALID) == 0) ccb->ccb_h.retry_count--; else { *action_string = "Retries exhausted"; goto sense_error_done; } } if ((err_action & SS_MASK) >= SS_START) { /* * Do common portions of commands that * use recovery CCBs. */ orig_ccb = xpt_alloc_ccb_nowait(); if (orig_ccb == NULL) { *action_string = "Can't allocate recovery CCB"; goto sense_error_done; } /* * Clear freeze flag for original request here, as * this freeze will be dropped as part of ERESTART. */ ccb->ccb_h.status &= ~CAM_DEV_QFRZN; bcopy(ccb, orig_ccb, sizeof(*orig_ccb)); } switch (err_action & SS_MASK) { case SS_NOP: *action_string = "No recovery action needed"; error = 0; break; case SS_RETRY: *action_string = "Retrying command (per sense data)"; error = ERESTART; break; case SS_FAIL: *action_string = "Unretryable error"; break; case SS_START: { int le; /* * Send a start unit command to the device, and * then retry the command. */ *action_string = "Attempting to start unit"; periph->flags |= CAM_PERIPH_RECOVERY_INPROG; /* * Check for removable media and set * load/eject flag appropriately. */ if (SID_IS_REMOVABLE(&cgd.inq_data)) le = TRUE; else le = FALSE; scsi_start_stop(&ccb->csio, /*retries*/1, camperiphdone, MSG_SIMPLE_Q_TAG, /*start*/TRUE, /*load/eject*/le, /*immediate*/FALSE, SSD_FULL_SIZE, /*timeout*/50000); break; } case SS_TUR: { /* * Send a Test Unit Ready to the device. * If the 'many' flag is set, we send 120 * test unit ready commands, one every half * second. Otherwise, we just send one TUR. * We only want to do this if the retry * count has not been exhausted. */ int retries; if ((err_action & SSQ_MANY) != 0) { *action_string = "Polling device for readiness"; retries = 120; } else { *action_string = "Testing device for readiness"; retries = 1; } periph->flags |= CAM_PERIPH_RECOVERY_INPROG; scsi_test_unit_ready(&ccb->csio, retries, camperiphdone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/5000); /* * Accomplish our 500ms delay by deferring * the release of our device queue appropriately. */ *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; *timeout = 500; break; } default: panic("Unhandled error action %x", err_action); } if ((err_action & SS_MASK) >= SS_START) { /* * Drop the priority, so that the recovery * CCB is the first to execute. Freeze the queue * after this command is sent so that we can * restore the old csio and have it queued in * the proper order before we release normal * transactions to the device. */ ccb->ccb_h.pinfo.priority--; ccb->ccb_h.flags |= CAM_DEV_QFREEZE; ccb->ccb_h.saved_ccb_ptr = orig_ccb; error = ERESTART; *orig = orig_ccb; } sense_error_done: *action = err_action; } return (error); } /* * Generic error handler. Peripheral drivers usually filter * out the errors that they handle in a unique mannor, then * call this function. */ int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags, union ccb *save_ccb) { struct cam_path *newpath; union ccb *orig_ccb, *scan_ccb; struct cam_periph *periph; const char *action_string; cam_status status; int frozen, error, openings; u_int32_t action, relsim_flags, timeout; action = SSQ_PRINT_SENSE; periph = xpt_path_periph(ccb->ccb_h.path); action_string = NULL; status = ccb->ccb_h.status; frozen = (status & CAM_DEV_QFRZN) != 0; status &= CAM_STATUS_MASK; openings = relsim_flags = timeout = 0; orig_ccb = ccb; switch (status) { case CAM_REQ_CMP: error = 0; action &= ~SSQ_PRINT_SENSE; break; case CAM_SCSI_STATUS_ERROR: error = camperiphscsistatuserror(ccb, &orig_ccb, camflags, sense_flags, &openings, &relsim_flags, &timeout, &action, &action_string); break; case CAM_AUTOSENSE_FAIL: error = EIO; /* we have to kill the command */ break; case CAM_UA_ABORT: case CAM_UA_TERMIO: case CAM_MSG_REJECT_REC: /* XXX Don't know that these are correct */ error = EIO; break; case CAM_SEL_TIMEOUT: if ((camflags & CAM_RETRY_SELTO) != 0) { if (ccb->ccb_h.retry_count > 0 && (periph->flags & CAM_PERIPH_INVALID) == 0) { ccb->ccb_h.retry_count--; error = ERESTART; /* * Wait a bit to give the device * time to recover before we try again. */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = periph_selto_delay; break; } action_string = "Retries exhausted"; } /* FALLTHROUGH */ case CAM_DEV_NOT_THERE: error = ENXIO; action = SSQ_LOST; break; case CAM_REQ_INVALID: case CAM_PATH_INVALID: case CAM_NO_HBA: case CAM_PROVIDE_FAIL: case CAM_REQ_TOO_BIG: case CAM_LUN_INVALID: case CAM_TID_INVALID: error = EINVAL; break; case CAM_SCSI_BUS_RESET: case CAM_BDR_SENT: /* * Commands that repeatedly timeout and cause these * kinds of error recovery actions, should return * CAM_CMD_TIMEOUT, which allows us to safely assume * that this command was an innocent bystander to * these events and should be unconditionally * retried. */ case CAM_REQUEUE_REQ: /* Unconditional requeue if device is still there */ if (periph->flags & CAM_PERIPH_INVALID) { action_string = "Periph was invalidated"; error = EIO; } else if (sense_flags & SF_NO_RETRY) { error = EIO; action_string = "Retry was blocked"; } else { error = ERESTART; action &= ~SSQ_PRINT_SENSE; } break; case CAM_RESRC_UNAVAIL: /* Wait a bit for the resource shortage to abate. */ timeout = periph_noresrc_delay; /* FALLTHROUGH */ case CAM_BUSY: if (timeout == 0) { /* Wait a bit for the busy condition to abate. */ timeout = periph_busy_delay; } relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; /* FALLTHROUGH */ case CAM_ATA_STATUS_ERROR: case CAM_REQ_CMP_ERR: case CAM_CMD_TIMEOUT: case CAM_UNEXP_BUSFREE: case CAM_UNCOR_PARITY: case CAM_DATA_RUN_ERR: default: if (periph->flags & CAM_PERIPH_INVALID) { error = EIO; action_string = "Periph was invalidated"; } else if (ccb->ccb_h.retry_count == 0) { error = EIO; action_string = "Retries exhausted"; } else if (sense_flags & SF_NO_RETRY) { error = EIO; action_string = "Retry was blocked"; } else { ccb->ccb_h.retry_count--; error = ERESTART; } break; } if ((sense_flags & SF_PRINT_ALWAYS) || CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO)) action |= SSQ_PRINT_SENSE; else if (sense_flags & SF_NO_PRINT) action &= ~SSQ_PRINT_SENSE; if ((action & SSQ_PRINT_SENSE) != 0) cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL); if (error != 0 && (action & SSQ_PRINT_SENSE) != 0) { if (error != ERESTART) { if (action_string == NULL) action_string = "Unretryable error"; xpt_print(ccb->ccb_h.path, "Error %d, %s\n", error, action_string); } else if (action_string != NULL) xpt_print(ccb->ccb_h.path, "%s\n", action_string); else xpt_print(ccb->ccb_h.path, "Retrying command\n"); } if ((action & SSQ_LOST) != 0) { lun_id_t lun_id; /* * For a selection timeout, we consider all of the LUNs on * the target to be gone. If the status is CAM_DEV_NOT_THERE, * then we only get rid of the device(s) specified by the * path in the original CCB. */ if (status == CAM_SEL_TIMEOUT) lun_id = CAM_LUN_WILDCARD; else lun_id = xpt_path_lun_id(ccb->ccb_h.path); /* Should we do more if we can't create the path?? */ if (xpt_create_path(&newpath, periph, xpt_path_path_id(ccb->ccb_h.path), xpt_path_target_id(ccb->ccb_h.path), lun_id) == CAM_REQ_CMP) { /* * Let peripheral drivers know that this * device has gone away. */ xpt_async(AC_LOST_DEVICE, newpath, NULL); xpt_free_path(newpath); } } /* Broadcast UNIT ATTENTIONs to all periphs. */ if ((action & SSQ_UA) != 0) xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb); /* Rescan target on "Reported LUNs data has changed" */ if ((action & SSQ_RESCAN) != 0) { if (xpt_create_path(&newpath, NULL, xpt_path_path_id(ccb->ccb_h.path), xpt_path_target_id(ccb->ccb_h.path), CAM_LUN_WILDCARD) == CAM_REQ_CMP) { scan_ccb = xpt_alloc_ccb_nowait(); if (scan_ccb != NULL) { scan_ccb->ccb_h.path = newpath; scan_ccb->ccb_h.func_code = XPT_SCAN_TGT; scan_ccb->crcn.flags = 0; xpt_rescan(scan_ccb); } else { xpt_print(newpath, "Can't allocate CCB to rescan target\n"); xpt_free_path(newpath); } } } /* Attempt a retry */ if (error == ERESTART || error == 0) { if (frozen != 0) ccb->ccb_h.status &= ~CAM_DEV_QFRZN; if (error == ERESTART) xpt_action(ccb); if (frozen != 0) cam_release_devq(ccb->ccb_h.path, relsim_flags, openings, timeout, /*getcount_only*/0); } return (error); } Index: head/sys/cam/cam_periph.h =================================================================== --- head/sys/cam/cam_periph.h (revision 260540) +++ head/sys/cam/cam_periph.h (revision 260541) @@ -1,252 +1,253 @@ /*- * Data structures and definitions for CAM peripheral ("type") drivers. * * Copyright (c) 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _CAM_CAM_PERIPH_H #define _CAM_CAM_PERIPH_H 1 #include #include #ifdef _KERNEL #include #include struct devstat; extern struct cam_periph *xpt_periph; extern struct periph_driver **periph_drivers; void periphdriver_register(void *); void periphdriver_init(int level); #include #define PERIPHDRIVER_DECLARE(name, driver) \ static int name ## _modevent(module_t mod, int type, void *data) \ { \ switch (type) { \ case MOD_LOAD: \ periphdriver_register(data); \ break; \ case MOD_UNLOAD: \ printf(#name " module unload - not possible for this module type\n"); \ return EINVAL; \ default: \ return EOPNOTSUPP; \ } \ return 0; \ } \ static moduledata_t name ## _mod = { \ #name, \ name ## _modevent, \ (void *)&driver \ }; \ DECLARE_MODULE(name, name ## _mod, SI_SUB_DRIVERS, SI_ORDER_ANY); \ MODULE_DEPEND(name, cam, 1, 1, 1) typedef void (periph_init_t)(void); /* * Callback informing the peripheral driver * it can perform it's initialization since * the XPT is now fully initialized. */ typedef periph_init_t *periph_init_func_t; struct periph_driver { periph_init_func_t init; char *driver_name; TAILQ_HEAD(,cam_periph) units; u_int generation; u_int flags; #define CAM_PERIPH_DRV_EARLY 0x01 }; typedef enum { CAM_PERIPH_BIO } cam_periph_type; /* Generically useful offsets into the peripheral private area */ #define ppriv_ptr0 periph_priv.entries[0].ptr #define ppriv_ptr1 periph_priv.entries[1].ptr #define ppriv_field0 periph_priv.entries[0].field #define ppriv_field1 periph_priv.entries[1].field typedef void periph_start_t (struct cam_periph *periph, union ccb *start_ccb); typedef cam_status periph_ctor_t (struct cam_periph *periph, void *arg); typedef void periph_oninv_t (struct cam_periph *periph); typedef void periph_dtor_t (struct cam_periph *periph); struct cam_periph { periph_start_t *periph_start; periph_oninv_t *periph_oninval; periph_dtor_t *periph_dtor; char *periph_name; struct cam_path *path; /* Compiled path to device */ void *softc; struct cam_sim *sim; u_int32_t unit_number; cam_periph_type type; u_int32_t flags; #define CAM_PERIPH_RUNNING 0x01 #define CAM_PERIPH_LOCKED 0x02 #define CAM_PERIPH_LOCK_WANTED 0x04 #define CAM_PERIPH_INVALID 0x08 #define CAM_PERIPH_NEW_DEV_FOUND 0x10 #define CAM_PERIPH_RECOVERY_INPROG 0x20 #define CAM_PERIPH_RUN_TASK 0x40 #define CAM_PERIPH_FREE 0x80 #define CAM_PERIPH_ANNOUNCED 0x100 uint32_t scheduled_priority; uint32_t immediate_priority; int periph_allocating; int periph_allocated; u_int32_t refcount; SLIST_HEAD(, ccb_hdr) ccb_list; /* For "immediate" requests */ SLIST_ENTRY(cam_periph) periph_links; TAILQ_ENTRY(cam_periph) unit_links; ac_callback_t *deferred_callback; ac_code deferred_ac; struct task periph_run_task; }; #define CAM_PERIPH_MAXMAPS 2 struct cam_periph_map_info { int num_bufs_used; struct buf *bp[CAM_PERIPH_MAXMAPS]; }; cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *, ac_callback_t *, ac_code, void *arg); struct cam_periph *cam_periph_find(struct cam_path *path, char *name); int cam_periph_list(struct cam_path *, struct sbuf *); cam_status cam_periph_acquire(struct cam_periph *periph); +void cam_periph_doacquire(struct cam_periph *periph); void cam_periph_release(struct cam_periph *periph); void cam_periph_release_locked(struct cam_periph *periph); void cam_periph_release_locked_buses(struct cam_periph *periph); int cam_periph_hold(struct cam_periph *periph, int priority); void cam_periph_unhold(struct cam_periph *periph); void cam_periph_invalidate(struct cam_periph *periph); int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo); void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo); union ccb *cam_periph_getccb(struct cam_periph *periph, u_int32_t priority); void cam_periph_ccbwait(union ccb *ccb); int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds); int cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)); void cam_freeze_devq(struct cam_path *path); u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t opening_reduction, u_int32_t arg, int getcount_only); void cam_periph_async(struct cam_periph *periph, u_int32_t code, struct cam_path *path, void *arg); void cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle_ms); void cam_periph_freeze_after_event(struct cam_periph *periph, struct timeval* event_time, u_int duration_ms); int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags, union ccb *save_ccb); static __inline struct mtx * cam_periph_mtx(struct cam_periph *periph) { return (xpt_path_mtx(periph->path)); } #define cam_periph_owned(periph) \ mtx_owned(xpt_path_mtx((periph)->path)) #define cam_periph_lock(periph) \ mtx_lock(xpt_path_mtx((periph)->path)) #define cam_periph_unlock(periph) \ mtx_unlock(xpt_path_mtx((periph)->path)) #define cam_periph_assert(periph, what) \ mtx_assert(xpt_path_mtx((periph)->path), (what)) #define cam_periph_sleep(periph, chan, priority, wmesg, timo) \ xpt_path_sleep((periph)->path, (chan), (priority), (wmesg), (timo)) static inline struct cam_periph * cam_periph_acquire_first(struct periph_driver *driver) { struct cam_periph *periph; xpt_lock_buses(); periph = TAILQ_FIRST(&driver->units); while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0) periph = TAILQ_NEXT(periph, unit_links); if (periph != NULL) periph->refcount++; xpt_unlock_buses(); return (periph); } static inline struct cam_periph * cam_periph_acquire_next(struct cam_periph *pperiph) { struct cam_periph *periph = pperiph; cam_periph_assert(pperiph, MA_NOTOWNED); xpt_lock_buses(); do { periph = TAILQ_NEXT(periph, unit_links); } while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0); if (periph != NULL) periph->refcount++; xpt_unlock_buses(); cam_periph_release(pperiph); return (periph); } #define CAM_PERIPH_FOREACH(periph, driver) \ for ((periph) = cam_periph_acquire_first(driver); \ (periph) != NULL; \ (periph) = cam_periph_acquire_next(periph)) #endif /* _KERNEL */ #endif /* _CAM_CAM_PERIPH_H */ Index: head/sys/cam/cam_xpt.c =================================================================== --- head/sys/cam/cam_xpt.c (revision 260540) +++ head/sys/cam/cam_xpt.c (revision 260541) @@ -1,5307 +1,5305 @@ /*- * Implementation of the Common Access Method Transport (XPT) layer. * * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* geometry translation */ #include /* for xpt_print below */ #include "opt_cam.h" /* * This is the maximum number of high powered commands (e.g. start unit) * that can be outstanding at a particular time. */ #ifndef CAM_MAX_HIGHPOWER #define CAM_MAX_HIGHPOWER 4 #endif /* Datastructures internal to the xpt layer */ MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers"); MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices"); MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs"); MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths"); /* Object for defering XPT actions to a taskqueue */ struct xpt_task { struct task task; void *data1; uintptr_t data2; }; struct xpt_softc { /* number of high powered commands that can go through right now */ struct mtx xpt_highpower_lock; STAILQ_HEAD(highpowerlist, cam_ed) highpowerq; int num_highpower; /* queue for handling async rescan requests. */ TAILQ_HEAD(, ccb_hdr) ccb_scanq; int buses_to_config; int buses_config_done; /* Registered busses */ TAILQ_HEAD(,cam_eb) xpt_busses; u_int bus_generation; struct intr_config_hook *xpt_config_hook; int boot_delay; struct callout boot_callout; struct mtx xpt_topo_lock; struct mtx xpt_lock; struct taskqueue *xpt_taskq; }; typedef enum { DM_RET_COPY = 0x01, DM_RET_FLAG_MASK = 0x0f, DM_RET_NONE = 0x00, DM_RET_STOP = 0x10, DM_RET_DESCEND = 0x20, DM_RET_ERROR = 0x30, DM_RET_ACTION_MASK = 0xf0 } dev_match_ret; typedef enum { XPT_DEPTH_BUS, XPT_DEPTH_TARGET, XPT_DEPTH_DEVICE, XPT_DEPTH_PERIPH } xpt_traverse_depth; struct xpt_traverse_config { xpt_traverse_depth depth; void *tr_func; void *tr_arg; }; typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg); typedef int xpt_targetfunc_t (struct cam_et *target, void *arg); typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg); typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg); typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg); /* Transport layer configuration information */ static struct xpt_softc xsoftc; TUNABLE_INT("kern.cam.boot_delay", &xsoftc.boot_delay); SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN, &xsoftc.boot_delay, 0, "Bus registration wait time"); struct cam_doneq { struct mtx_padalign cam_doneq_mtx; STAILQ_HEAD(, ccb_hdr) cam_doneq; int cam_doneq_sleep; }; static struct cam_doneq cam_doneqs[MAXCPU]; static int cam_num_doneqs; static struct proc *cam_proc; TUNABLE_INT("kern.cam.num_doneqs", &cam_num_doneqs); SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN, &cam_num_doneqs, 0, "Number of completion queues/threads"); struct cam_periph *xpt_periph; static periph_init_t xpt_periph_init; static struct periph_driver xpt_driver = { xpt_periph_init, "xpt", TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(xpt, xpt_driver); static d_open_t xptopen; static d_close_t xptclose; static d_ioctl_t xptioctl; static d_ioctl_t xptdoioctl; static struct cdevsw xpt_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_open = xptopen, .d_close = xptclose, .d_ioctl = xptioctl, .d_name = "xpt", }; /* Storage for debugging datastructures */ struct cam_path *cam_dpath; u_int32_t cam_dflags = CAM_DEBUG_FLAGS; TUNABLE_INT("kern.cam.dflags", &cam_dflags); SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RW, &cam_dflags, 0, "Enabled debug flags"); u_int32_t cam_debug_delay = CAM_DEBUG_DELAY; TUNABLE_INT("kern.cam.debug_delay", &cam_debug_delay); SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RW, &cam_debug_delay, 0, "Delay in us after each debug message"); /* Our boot-time initialization hook */ static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *); static moduledata_t cam_moduledata = { "cam", cam_module_event_handler, NULL }; static int xpt_init(void *); DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND); MODULE_VERSION(cam, 1); static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg); static path_id_t xptnextfreepathid(void); static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus); static union ccb *xpt_get_ccb(struct cam_periph *periph); static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph); static void xpt_run_allocq(struct cam_periph *periph, int sleep); static void xpt_run_allocq_task(void *context, int pending); static void xpt_run_devq(struct cam_devq *devq); static timeout_t xpt_release_devq_timeout; static void xpt_release_simq_timeout(void *arg) __unused; static void xpt_acquire_bus(struct cam_eb *bus); static void xpt_release_bus(struct cam_eb *bus); static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count); static int xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue); static struct cam_et* xpt_alloc_target(struct cam_eb *bus, target_id_t target_id); static void xpt_acquire_target(struct cam_et *target); static void xpt_release_target(struct cam_et *target); static struct cam_eb* xpt_find_bus(path_id_t path_id); static struct cam_et* xpt_find_target(struct cam_eb *bus, target_id_t target_id); static struct cam_ed* xpt_find_device(struct cam_et *target, lun_id_t lun_id); static void xpt_config(void *arg); static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo, u_int32_t new_priority); static xpt_devicefunc_t xptpassannouncefunc; static void xptaction(struct cam_sim *sim, union ccb *work_ccb); static void xptpoll(struct cam_sim *sim); static void camisr_runqueue(void); static void xpt_done_process(struct ccb_hdr *ccb_h); static void xpt_done_td(void *); static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_eb *bus); static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_ed *device); static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_periph *periph); static xpt_busfunc_t xptedtbusfunc; static xpt_targetfunc_t xptedttargetfunc; static xpt_devicefunc_t xptedtdevicefunc; static xpt_periphfunc_t xptedtperiphfunc; static xpt_pdrvfunc_t xptplistpdrvfunc; static xpt_periphfunc_t xptplistperiphfunc; static int xptedtmatch(struct ccb_dev_match *cdm); static int xptperiphlistmatch(struct ccb_dev_match *cdm); static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg); static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg); static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg); static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg); static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static xpt_busfunc_t xptdefbusfunc; static xpt_targetfunc_t xptdeftargetfunc; static xpt_devicefunc_t xptdefdevicefunc; static xpt_periphfunc_t xptdefperiphfunc; static void xpt_finishconfig_task(void *context, int pending); static void xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static xpt_devicefunc_t xptsetasyncfunc; static xpt_busfunc_t xptsetasyncbusfunc; static cam_status xptregister(struct cam_periph *periph, void *arg); static __inline int device_is_queued(struct cam_ed *device); static __inline int xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev) { int retval; mtx_assert(&devq->send_mtx, MA_OWNED); if ((dev->ccbq.queue.entries > 0) && (dev->ccbq.dev_openings > 0) && (dev->ccbq.queue.qfrozen_cnt == 0)) { /* * The priority of a device waiting for controller * resources is that of the highest priority CCB * enqueued. */ retval = xpt_schedule_dev(&devq->send_queue, &dev->devq_entry, CAMQ_GET_PRIO(&dev->ccbq.queue)); } else { retval = 0; } return (retval); } static __inline int device_is_queued(struct cam_ed *device) { return (device->devq_entry.index != CAM_UNQUEUED_INDEX); } static void xpt_periph_init() { make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0"); } static int xptopen(struct cdev *dev, int flags, int fmt, struct thread *td) { /* * Only allow read-write access. */ if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0)) return(EPERM); /* * We don't allow nonblocking access. */ if ((flags & O_NONBLOCK) != 0) { printf("%s: can't do nonblocking access\n", devtoname(dev)); return(ENODEV); } return(0); } static int xptclose(struct cdev *dev, int flag, int fmt, struct thread *td) { return(0); } /* * Don't automatically grab the xpt softc lock here even though this is going * through the xpt device. The xpt device is really just a back door for * accessing other devices and SIMs, so the right thing to do is to grab * the appropriate SIM lock once the bus/SIM is located. */ static int xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { int error; if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) { error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl); } return (error); } static int xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { int error; error = 0; switch(cmd) { /* * For the transport layer CAMIOCOMMAND ioctl, we really only want * to accept CCB types that don't quite make sense to send through a * passthrough driver. XPT_PATH_INQ is an exception to this, as stated * in the CAM spec. */ case CAMIOCOMMAND: { union ccb *ccb; union ccb *inccb; struct cam_eb *bus; inccb = (union ccb *)addr; bus = xpt_find_bus(inccb->ccb_h.path_id); if (bus == NULL) return (EINVAL); switch (inccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_RESET_BUS: if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD || inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) { xpt_release_bus(bus); return (EINVAL); } break; case XPT_SCAN_TGT: if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD || inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) { xpt_release_bus(bus); return (EINVAL); } break; default: break; } switch(inccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_RESET_BUS: case XPT_PATH_INQ: case XPT_ENG_INQ: case XPT_SCAN_LUN: case XPT_SCAN_TGT: ccb = xpt_alloc_ccb(); /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb->ccb_h.path, NULL, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; xpt_free_ccb(ccb); break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(ccb, inccb); xpt_path_lock(ccb->ccb_h.path); cam_periph_runccb(ccb, NULL, 0, 0, NULL); xpt_path_unlock(ccb->ccb_h.path); bcopy(ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); break; case XPT_DEBUG: { union ccb ccb; /* * This is an immediate CCB, so it's okay to * allocate it on the stack. */ /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb.ccb_h.path, NULL, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(&ccb, inccb); xpt_action(&ccb); bcopy(&ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb.ccb_h.path); break; } case XPT_DEV_MATCH: { struct cam_periph_map_info mapinfo; struct cam_path *old_path; /* * We can't deal with physical addresses for this * type of transaction. */ if ((inccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) { error = EINVAL; break; } /* * Save this in case the caller had it set to * something in particular. */ old_path = inccb->ccb_h.path; /* * We really don't need a path for the matching * code. The path is needed because of the * debugging statements in xpt_action(). They * assume that the CCB has a valid path. */ inccb->ccb_h.path = xpt_periph->path; bzero(&mapinfo, sizeof(mapinfo)); /* * Map the pattern and match buffers into kernel * virtual address space. */ error = cam_periph_mapmem(inccb, &mapinfo); if (error) { inccb->ccb_h.path = old_path; break; } /* * This is an immediate CCB, we can send it on directly. */ xpt_action(inccb); /* * Map the buffers back into user space. */ cam_periph_unmapmem(inccb, &mapinfo); inccb->ccb_h.path = old_path; error = 0; break; } default: error = ENOTSUP; break; } xpt_release_bus(bus); break; } /* * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input, * with the periphal driver name and unit name filled in. The other * fields don't really matter as input. The passthrough driver name * ("pass"), and unit number are passed back in the ccb. The current * device generation number, and the index into the device peripheral * driver list, and the status are also passed back. Note that * since we do everything in one pass, unlike the XPT_GDEVLIST ccb, * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is * (or rather should be) impossible for the device peripheral driver * list to change since we look at the whole thing in one pass, and * we do it with lock protection. * */ case CAMGETPASSTHRU: { union ccb *ccb; struct cam_periph *periph; struct periph_driver **p_drv; char *name; u_int unit; int base_periph_found; ccb = (union ccb *)addr; unit = ccb->cgdl.unit_number; name = ccb->cgdl.periph_name; base_periph_found = 0; /* * Sanity check -- make sure we don't get a null peripheral * driver name. */ if (*ccb->cgdl.periph_name == '\0') { error = EINVAL; break; } /* Keep the list from changing while we traverse it */ xpt_lock_buses(); /* first find our driver in the list of drivers */ for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) if (strcmp((*p_drv)->driver_name, name) == 0) break; if (*p_drv == NULL) { xpt_unlock_buses(); ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; break; } /* * Run through every peripheral instance of this driver * and check to see whether it matches the unit passed * in by the user. If it does, get out of the loops and * find the passthrough driver associated with that * peripheral driver. */ for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL; periph = TAILQ_NEXT(periph, unit_links)) { if (periph->unit_number == unit) break; } /* * If we found the peripheral driver that the user passed * in, go through all of the peripheral drivers for that * particular device and look for a passthrough driver. */ if (periph != NULL) { struct cam_ed *device; int i; base_periph_found = 1; device = periph->path->device; for (i = 0, periph = SLIST_FIRST(&device->periphs); periph != NULL; periph = SLIST_NEXT(periph, periph_links), i++) { /* * Check to see whether we have a * passthrough device or not. */ if (strcmp(periph->periph_name, "pass") == 0) { /* * Fill in the getdevlist fields. */ strcpy(ccb->cgdl.periph_name, periph->periph_name); ccb->cgdl.unit_number = periph->unit_number; if (SLIST_NEXT(periph, periph_links)) ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; else ccb->cgdl.status = CAM_GDEVLIST_LAST_DEVICE; ccb->cgdl.generation = device->generation; ccb->cgdl.index = i; /* * Fill in some CCB header fields * that the user may want. */ ccb->ccb_h.path_id = periph->path->bus->path_id; ccb->ccb_h.target_id = periph->path->target->target_id; ccb->ccb_h.target_lun = periph->path->device->lun_id; ccb->ccb_h.status = CAM_REQ_CMP; break; } } } /* * If the periph is null here, one of two things has * happened. The first possibility is that we couldn't * find the unit number of the particular peripheral driver * that the user is asking about. e.g. the user asks for * the passthrough driver for "da11". We find the list of * "da" peripherals all right, but there is no unit 11. * The other possibility is that we went through the list * of peripheral drivers attached to the device structure, * but didn't find one with the name "pass". Either way, * we return ENOENT, since we couldn't find something. */ if (periph == NULL) { ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; /* * It is unfortunate that this is even necessary, * but there are many, many clueless users out there. * If this is true, the user is looking for the * passthrough driver, but doesn't have one in his * kernel. */ if (base_periph_found == 1) { printf("xptioctl: pass driver is not in the " "kernel\n"); printf("xptioctl: put \"device pass\" in " "your kernel config file\n"); } } xpt_unlock_buses(); break; } default: error = ENOTTY; break; } return(error); } static int cam_module_event_handler(module_t mod, int what, void *arg) { int error; switch (what) { case MOD_LOAD: if ((error = xpt_init(NULL)) != 0) return (error); break; case MOD_UNLOAD: return EBUSY; default: return EOPNOTSUPP; } return 0; } static void xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb) { if (done_ccb->ccb_h.ppriv_ptr1 == NULL) { xpt_free_path(done_ccb->ccb_h.path); xpt_free_ccb(done_ccb); } else { done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1; (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb); } xpt_release_boot(); } /* thread to handle bus rescans */ static void xpt_scanner_thread(void *dummy) { union ccb *ccb; struct cam_path path; xpt_lock_buses(); for (;;) { if (TAILQ_EMPTY(&xsoftc.ccb_scanq)) msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO, "ccb_scanq", 0); if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) { TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe); xpt_unlock_buses(); /* * Since lock can be dropped inside and path freed * by completion callback even before return here, * take our own path copy for reference. */ xpt_copy_path(&path, ccb->ccb_h.path); xpt_path_lock(&path); xpt_action(ccb); xpt_path_unlock(&path); xpt_release_path(&path); xpt_lock_buses(); } } } void xpt_rescan(union ccb *ccb) { struct ccb_hdr *hdr; /* Prepare request */ if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_BUS; else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_TGT; else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_LUN; else { xpt_print(ccb->ccb_h.path, "illegal scan path\n"); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp; ccb->ccb_h.cbfcnp = xpt_rescan_done; xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT); /* Don't make duplicate entries for the same paths. */ xpt_lock_buses(); if (ccb->ccb_h.ppriv_ptr1 == NULL) { TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) { if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) { wakeup(&xsoftc.ccb_scanq); xpt_unlock_buses(); xpt_print(ccb->ccb_h.path, "rescan already queued\n"); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } } } TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe); xsoftc.buses_to_config++; wakeup(&xsoftc.ccb_scanq); xpt_unlock_buses(); } /* Functions accessed by the peripheral drivers */ static int xpt_init(void *dummy) { struct cam_sim *xpt_sim; struct cam_path *path; struct cam_devq *devq; cam_status status; int error, i; TAILQ_INIT(&xsoftc.xpt_busses); TAILQ_INIT(&xsoftc.ccb_scanq); STAILQ_INIT(&xsoftc.highpowerq); xsoftc.num_highpower = CAM_MAX_HIGHPOWER; mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF); mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF); mtx_init(&xsoftc.xpt_topo_lock, "XPT topology lock", NULL, MTX_DEF); xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK, taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq); #ifdef CAM_BOOT_DELAY /* * Override this value at compile time to assist our users * who don't use loader to boot a kernel. */ xsoftc.boot_delay = CAM_BOOT_DELAY; #endif /* * The xpt layer is, itself, the equivelent of a SIM. * Allow 16 ccbs in the ccb pool for it. This should * give decent parallelism when we probe busses and * perform other XPT functions. */ devq = cam_simq_alloc(16); xpt_sim = cam_sim_alloc(xptaction, xptpoll, "xpt", /*softc*/NULL, /*unit*/0, /*mtx*/&xsoftc.xpt_lock, /*max_dev_transactions*/0, /*max_tagged_dev_transactions*/0, devq); if (xpt_sim == NULL) return (ENOMEM); mtx_lock(&xsoftc.xpt_lock); if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) { mtx_unlock(&xsoftc.xpt_lock); printf("xpt_init: xpt_bus_register failed with status %#x," " failing attach\n", status); return (EINVAL); } mtx_unlock(&xsoftc.xpt_lock); /* * Looking at the XPT from the SIM layer, the XPT is * the equivelent of a peripheral driver. Allocate * a peripheral driver entry for us. */ if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)) != CAM_REQ_CMP) { mtx_unlock(&xsoftc.xpt_lock); printf("xpt_init: xpt_create_path failed with status %#x," " failing attach\n", status); return (EINVAL); } xpt_path_lock(path); cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO, path, NULL, 0, xpt_sim); xpt_path_unlock(path); xpt_free_path(path); if (cam_num_doneqs < 1) cam_num_doneqs = 1 + mp_ncpus / 6; else if (cam_num_doneqs > MAXCPU) cam_num_doneqs = MAXCPU; for (i = 0; i < cam_num_doneqs; i++) { mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL, MTX_DEF); STAILQ_INIT(&cam_doneqs[i].cam_doneq); error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i], &cam_proc, NULL, 0, 0, "cam", "doneq%d", i); if (error != 0) { cam_num_doneqs = i; break; } } if (cam_num_doneqs < 1) { printf("xpt_init: Cannot init completion queues " "- failing attach\n"); return (ENOMEM); } /* * Register a callback for when interrupts are enabled. */ xsoftc.xpt_config_hook = (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook), M_CAMXPT, M_NOWAIT | M_ZERO); if (xsoftc.xpt_config_hook == NULL) { printf("xpt_init: Cannot malloc config hook " "- failing attach\n"); return (ENOMEM); } xsoftc.xpt_config_hook->ich_func = xpt_config; if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) { free (xsoftc.xpt_config_hook, M_CAMXPT); printf("xpt_init: config_intrhook_establish failed " "- failing attach\n"); } return (0); } static cam_status xptregister(struct cam_periph *periph, void *arg) { struct cam_sim *xpt_sim; if (periph == NULL) { printf("xptregister: periph was NULL!!\n"); return(CAM_REQ_CMP_ERR); } xpt_sim = (struct cam_sim *)arg; xpt_sim->softc = periph; xpt_periph = periph; periph->softc = NULL; return(CAM_REQ_CMP); } int32_t xpt_add_periph(struct cam_periph *periph) { struct cam_ed *device; int32_t status; TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph); device = periph->path->device; status = CAM_REQ_CMP; if (device != NULL) { mtx_lock(&device->target->bus->eb_mtx); device->generation++; SLIST_INSERT_HEAD(&device->periphs, periph, periph_links); mtx_unlock(&device->target->bus->eb_mtx); } return (status); } void xpt_remove_periph(struct cam_periph *periph) { struct cam_ed *device; device = periph->path->device; if (device != NULL) { mtx_lock(&device->target->bus->eb_mtx); device->generation++; SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links); mtx_unlock(&device->target->bus->eb_mtx); } } void xpt_announce_periph(struct cam_periph *periph, char *announce_string) { struct cam_path *path = periph->path; cam_periph_assert(periph, MA_OWNED); periph->flags |= CAM_PERIPH_ANNOUNCED; printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); printf("%s%d: ", periph->periph_name, periph->unit_number); if (path->device->protocol == PROTO_SCSI) scsi_print_inquiry(&path->device->inq_data); else if (path->device->protocol == PROTO_ATA || path->device->protocol == PROTO_SATAPM) ata_print_ident(&path->device->ident_data); else if (path->device->protocol == PROTO_SEMB) semb_print_ident( (struct sep_identify_data *)&path->device->ident_data); else printf("Unknown protocol device\n"); if (path->device->serial_num_len > 0) { /* Don't wrap the screen - print only the first 60 chars */ printf("%s%d: Serial Number %.60s\n", periph->periph_name, periph->unit_number, path->device->serial_num); } /* Announce transport details. */ (*(path->bus->xport->announce))(periph); /* Announce command queueing. */ if (path->device->inq_flags & SID_CmdQue || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) { printf("%s%d: Command Queueing enabled\n", periph->periph_name, periph->unit_number); } /* Announce caller's details if they've passed in. */ if (announce_string != NULL) printf("%s%d: %s\n", periph->periph_name, periph->unit_number, announce_string); } void xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string) { if (quirks != 0) { printf("%s%d: quirks=0x%b\n", periph->periph_name, periph->unit_number, quirks, bit_string); } } void xpt_denounce_periph(struct cam_periph *periph) { struct cam_path *path = periph->path; cam_periph_assert(periph, MA_OWNED); printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); printf("%s%d: ", periph->periph_name, periph->unit_number); if (path->device->protocol == PROTO_SCSI) scsi_print_inquiry_short(&path->device->inq_data); else if (path->device->protocol == PROTO_ATA || path->device->protocol == PROTO_SATAPM) ata_print_ident_short(&path->device->ident_data); else if (path->device->protocol == PROTO_SEMB) semb_print_ident_short( (struct sep_identify_data *)&path->device->ident_data); else printf("Unknown protocol device"); if (path->device->serial_num_len > 0) printf(" s/n %.60s", path->device->serial_num); printf(" detached\n"); } int xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path) { int ret = -1, l; struct ccb_dev_advinfo cdai; struct scsi_vpd_id_descriptor *idd; xpt_path_assert(path, MA_OWNED); memset(&cdai, 0, sizeof(cdai)); xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.bufsiz = len; if (!strcmp(attr, "GEOM::ident")) cdai.buftype = CDAI_TYPE_SERIAL_NUM; else if (!strcmp(attr, "GEOM::physpath")) cdai.buftype = CDAI_TYPE_PHYS_PATH; else if (strcmp(attr, "GEOM::lunid") == 0 || strcmp(attr, "GEOM::lunname") == 0) { cdai.buftype = CDAI_TYPE_SCSI_DEVID; cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; } else goto out; cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO); if (cdai.buf == NULL) { ret = ENOMEM; goto out; } xpt_action((union ccb *)&cdai); /* can only be synchronous */ if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); if (cdai.provsiz == 0) goto out; if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) { if (strcmp(attr, "GEOM::lunid") == 0) { idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, cdai.provsiz, scsi_devid_is_lun_naa); if (idd == NULL) idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, cdai.provsiz, scsi_devid_is_lun_eui64); } else idd = NULL; if (idd == NULL) idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, cdai.provsiz, scsi_devid_is_lun_t10); if (idd == NULL) idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, cdai.provsiz, scsi_devid_is_lun_name); if (idd == NULL) goto out; ret = 0; if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII || (idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) { l = strnlen(idd->identifier, idd->length); if (l < len) { bcopy(idd->identifier, buf, l); buf[l] = 0; } else ret = EFAULT; } else { if (idd->length * 2 < len) { for (l = 0; l < idd->length; l++) sprintf(buf + l * 2, "%02x", idd->identifier[l]); } else ret = EFAULT; } } else { ret = 0; if (strlcpy(buf, cdai.buf, len) >= len) ret = EFAULT; } out: if (cdai.buf != NULL) free(cdai.buf, M_CAMXPT); return ret; } static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_eb *bus) { dev_match_ret retval; int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (bus == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this bus matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct bus_match_pattern *cur_pattern; /* * If the pattern in question isn't for a bus node, we * aren't interested. However, we do indicate to the * calling routine that we should continue descending the * tree, since the user wants to match against lower-level * EDT elements. */ if (patterns[i].type != DEV_MATCH_BUS) { if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.bus_pattern; /* * If they want to match any bus node, we give them any * device node. */ if (cur_pattern->flags == BUS_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * If we've already decided on an action, go ahead * and return. */ if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE) return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == BUS_MATCH_NONE) continue; if (((cur_pattern->flags & BUS_MATCH_PATH) != 0) && (cur_pattern->path_id != bus->path_id)) continue; if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0) && (cur_pattern->bus_id != bus->sim->bus_id)) continue; if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0) && (cur_pattern->unit_number != bus->sim->unit_number)) continue; if (((cur_pattern->flags & BUS_MATCH_NAME) != 0) && (strncmp(cur_pattern->dev_name, bus->sim->sim_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this bus. So tell the caller to copy the * data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a non-bus matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a non-bus * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen anything other than bus matching patterns. So * tell the caller to stop descending the tree -- the user doesn't * want to match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_ed *device) { dev_match_ret retval; int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (device == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this device matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct device_match_pattern *cur_pattern; struct scsi_vpd_device_id *device_id_page; /* * If the pattern in question isn't for a device node, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_DEVICE) { if ((patterns[i].type == DEV_MATCH_PERIPH) && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.device_pattern; /* Error out if mutually exclusive options are specified. */ if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID)) == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID)) return(DM_RET_ERROR); /* * If they want to match any device node, we give them any * device node. */ if (cur_pattern->flags == DEV_MATCH_ANY) goto copy_dev_node; /* * Not sure why someone would do this... */ if (cur_pattern->flags == DEV_MATCH_NONE) continue; if (((cur_pattern->flags & DEV_MATCH_PATH) != 0) && (cur_pattern->path_id != device->target->bus->path_id)) continue; if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0) && (cur_pattern->target_id != device->target->target_id)) continue; if (((cur_pattern->flags & DEV_MATCH_LUN) != 0) && (cur_pattern->target_lun != device->lun_id)) continue; if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0) && (cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)&cur_pattern->data.inq_pat, 1, sizeof(cur_pattern->data.inq_pat), scsi_static_inquiry_match) == NULL)) continue; device_id_page = (struct scsi_vpd_device_id *)device->device_id; if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0) && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN || scsi_devid_match((uint8_t *)device_id_page->desc_list, device->device_id_len - SVPD_DEVICE_ID_HDR_LEN, cur_pattern->data.devid_pat.id, cur_pattern->data.devid_pat.id_len) != 0)) continue; copy_dev_node: /* * If we get to this point, the user definitely wants * information on this device. So tell the caller to copy * the data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a peripheral matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a peripheral * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen any peripheral matching patterns. So tell the * caller to stop descending the tree -- the user doesn't want to * match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } /* * Match a single peripheral against any number of match patterns. */ static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_periph *periph) { dev_match_ret retval; int i; /* * If we aren't given something to match against, that's an error. */ if (periph == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this peripheral matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_STOP | DM_RET_COPY); /* * There aren't any nodes below a peripheral node, so there's no * reason to descend the tree any further. */ retval = DM_RET_STOP; for (i = 0; i < num_patterns; i++) { struct periph_match_pattern *cur_pattern; /* * If the pattern in question isn't for a peripheral, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_PERIPH) continue; cur_pattern = &patterns[i].pattern.periph_pattern; /* * If they want to match on anything, then we will do so. */ if (cur_pattern->flags == PERIPH_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * We've already set the return action to stop, * since there are no nodes below peripherals in * the tree. */ return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == PERIPH_MATCH_NONE) continue; if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0) && (cur_pattern->path_id != periph->path->bus->path_id)) continue; /* * For the target and lun id's, we have to make sure the * target and lun pointers aren't NULL. The xpt peripheral * has a wildcard target and device. */ if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0) && ((periph->path->target == NULL) ||(cur_pattern->target_id != periph->path->target->target_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0) && ((periph->path->device == NULL) || (cur_pattern->target_lun != periph->path->device->lun_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0) && (cur_pattern->unit_number != periph->unit_number)) continue; if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0) && (strncmp(cur_pattern->periph_name, periph->periph_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this peripheral. So tell the caller to * copy the data out. */ retval |= DM_RET_COPY; /* * The return action has already been set to stop, since * peripherals don't have any nodes below them in the EDT. */ return(retval); } /* * If we get to this point, the peripheral that was passed in * doesn't match any of the patterns. */ return(retval); } static int xptedtbusfunc(struct cam_eb *bus, void *arg) { struct ccb_dev_match *cdm; struct cam_et *target; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) retval = DM_RET_DESCEND; else retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus); /* * If we got an error, bail out of the search. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this bus out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS; cdm->pos.cookie.bus = bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_BUS; cdm->matches[j].result.bus_result.path_id = bus->path_id; cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id; cdm->matches[j].result.bus_result.unit_number = bus->sim->unit_number; strncpy(cdm->matches[j].result.bus_result.dev_name, bus->sim->sim_name, DEV_IDLEN); } /* * If the user is only interested in busses, there's no * reason to descend to the next level in the tree. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a target generation recorded, check it to * make sure the target list hasn't changed. */ mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) { if ((cdm->pos.generations[CAM_TARGET_GENERATION] != bus->generation)) { mtx_unlock(&bus->eb_mtx); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return (0); } target = (struct cam_et *)cdm->pos.cookie.target; target->refcount++; } else target = NULL; mtx_unlock(&bus->eb_mtx); return (xpttargettraverse(bus, target, xptedttargetfunc, arg)); } static int xptedttargetfunc(struct cam_et *target, void *arg) { struct ccb_dev_match *cdm; struct cam_eb *bus; struct cam_ed *device; cdm = (struct ccb_dev_match *)arg; bus = target->bus; /* * If there is a device list generation recorded, check it to * make sure the device list hasn't changed. */ mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device != NULL)) { if (cdm->pos.generations[CAM_DEV_GENERATION] != target->generation) { mtx_unlock(&bus->eb_mtx); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } device = (struct cam_ed *)cdm->pos.cookie.device; device->refcount++; } else device = NULL; mtx_unlock(&bus->eb_mtx); return (xptdevicetraverse(target, device, xptedtdevicefunc, arg)); } static int xptedtdevicefunc(struct cam_ed *device, void *arg) { struct cam_eb *bus; struct cam_periph *periph; struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; bus = device->target->bus; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) retval = DM_RET_DESCEND; else retval = xptdevicematch(cdm->patterns, cdm->num_patterns, device); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this device out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE; cdm->pos.cookie.bus = device->target->bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->pos.cookie.target = device->target; cdm->pos.generations[CAM_TARGET_GENERATION] = device->target->bus->generation; cdm->pos.cookie.device = device; cdm->pos.generations[CAM_DEV_GENERATION] = device->target->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_DEVICE; cdm->matches[j].result.device_result.path_id = device->target->bus->path_id; cdm->matches[j].result.device_result.target_id = device->target->target_id; cdm->matches[j].result.device_result.target_lun = device->lun_id; cdm->matches[j].result.device_result.protocol = device->protocol; bcopy(&device->inq_data, &cdm->matches[j].result.device_result.inq_data, sizeof(struct scsi_inquiry_data)); bcopy(&device->ident_data, &cdm->matches[j].result.device_result.ident_data, sizeof(struct ata_params)); /* Let the user know whether this device is unconfigured */ if (device->flags & CAM_DEV_UNCONFIGURED) cdm->matches[j].result.device_result.flags = DEV_RESULT_UNCONFIGURED; else cdm->matches[j].result.device_result.flags = DEV_RESULT_NOFLAG; } /* * If the user isn't interested in peripherals, don't descend * the tree any further. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a peripheral list generation recorded, make sure * it hasn't changed. */ xpt_lock_buses(); mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == device->target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) { if (cdm->pos.generations[CAM_PERIPH_GENERATION] != device->generation) { mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } periph = (struct cam_periph *)cdm->pos.cookie.periph; periph->refcount++; } else periph = NULL; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg)); } static int xptedtperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE | CAM_DEV_POS_PERIPH; cdm->pos.cookie.bus = periph->path->bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->pos.cookie.target = periph->path->target; cdm->pos.generations[CAM_TARGET_GENERATION] = periph->path->bus->generation; cdm->pos.cookie.device = periph->path->device; cdm->pos.generations[CAM_DEV_GENERATION] = periph->path->target->generation; cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = periph->path->device->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; strncpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, DEV_IDLEN); } return(1); } static int xptedtmatch(struct ccb_dev_match *cdm) { struct cam_eb *bus; int ret; cdm->num_matches = 0; /* * Check the bus list generation. If it has changed, the user * needs to reset everything and start over. */ xpt_lock_buses(); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus != NULL)) { if (cdm->pos.generations[CAM_BUS_GENERATION] != xsoftc.bus_generation) { xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } bus = (struct cam_eb *)cdm->pos.cookie.bus; bus->refcount++; } else bus = NULL; xpt_unlock_buses(); ret = xptbustraverse(bus, xptedtbusfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the EDT. It also means that one of the subroutines * has set the status field to the proper value. If we get back 1, * we've fully traversed the EDT and copied out any matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptplistpdrvfunc(struct periph_driver **pdrv, void *arg) { struct cam_periph *periph; struct ccb_dev_match *cdm; cdm = (struct ccb_dev_match *)arg; xpt_lock_buses(); if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv == pdrv) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) { if (cdm->pos.generations[CAM_PERIPH_GENERATION] != (*pdrv)->generation) { xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } periph = (struct cam_periph *)cdm->pos.cookie.periph; periph->refcount++; } else periph = NULL; xpt_unlock_buses(); return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg)); } static int xptplistperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { struct periph_driver **pdrv; pdrv = NULL; bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR | CAM_DEV_POS_PERIPH; /* * This may look a bit non-sensical, but it is * actually quite logical. There are very few * peripheral drivers, and bloating every peripheral * structure with a pointer back to its parent * peripheral driver linker set entry would cost * more in the long run than doing this quick lookup. */ for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) { if (strcmp((*pdrv)->driver_name, periph->periph_name) == 0) break; } if (*pdrv == NULL) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } cdm->pos.cookie.pdrv = pdrv; /* * The periph generation slot does double duty, as * does the periph pointer slot. They are used for * both edt and pdrv lookups and positioning. */ cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = (*pdrv)->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; /* * The transport layer peripheral doesn't have a target or * lun. */ if (periph->path->target) cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; else cdm->matches[j].result.periph_result.target_id = CAM_TARGET_WILDCARD; if (periph->path->device) cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; else cdm->matches[j].result.periph_result.target_lun = CAM_LUN_WILDCARD; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; strncpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, DEV_IDLEN); } return(1); } static int xptperiphlistmatch(struct ccb_dev_match *cdm) { int ret; cdm->num_matches = 0; /* * At this point in the edt traversal function, we check the bus * list generation to make sure that no busses have been added or * removed since the user last sent a XPT_DEV_MATCH ccb through. * For the peripheral driver list traversal function, however, we * don't have to worry about new peripheral driver types coming or * going; they're in a linker set, and therefore can't change * without a recompile. */ if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv != NULL)) ret = xptpdrvtraverse( (struct periph_driver **)cdm->pos.cookie.pdrv, xptplistpdrvfunc, cdm); else ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the peripheral driver tree. It also means that one of * the subroutines has set the status field to the proper value. If * we get back 1, we've fully traversed the EDT and copied out any * matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg) { struct cam_eb *bus, *next_bus; int retval; retval = 1; if (start_bus) bus = start_bus; else { xpt_lock_buses(); bus = TAILQ_FIRST(&xsoftc.xpt_busses); if (bus == NULL) { xpt_unlock_buses(); return (retval); } bus->refcount++; xpt_unlock_buses(); } for (; bus != NULL; bus = next_bus) { retval = tr_func(bus, arg); if (retval == 0) { xpt_release_bus(bus); break; } xpt_lock_buses(); next_bus = TAILQ_NEXT(bus, links); if (next_bus) next_bus->refcount++; xpt_unlock_buses(); xpt_release_bus(bus); } return(retval); } static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg) { struct cam_et *target, *next_target; int retval; retval = 1; if (start_target) target = start_target; else { mtx_lock(&bus->eb_mtx); target = TAILQ_FIRST(&bus->et_entries); if (target == NULL) { mtx_unlock(&bus->eb_mtx); return (retval); } target->refcount++; mtx_unlock(&bus->eb_mtx); } for (; target != NULL; target = next_target) { retval = tr_func(target, arg); if (retval == 0) { xpt_release_target(target); break; } mtx_lock(&bus->eb_mtx); next_target = TAILQ_NEXT(target, links); if (next_target) next_target->refcount++; mtx_unlock(&bus->eb_mtx); xpt_release_target(target); } return(retval); } static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg) { struct cam_eb *bus; struct cam_ed *device, *next_device; int retval; retval = 1; bus = target->bus; if (start_device) device = start_device; else { mtx_lock(&bus->eb_mtx); device = TAILQ_FIRST(&target->ed_entries); if (device == NULL) { mtx_unlock(&bus->eb_mtx); return (retval); } device->refcount++; mtx_unlock(&bus->eb_mtx); } for (; device != NULL; device = next_device) { mtx_lock(&device->device_mtx); retval = tr_func(device, arg); mtx_unlock(&device->device_mtx); if (retval == 0) { xpt_release_device(device); break; } mtx_lock(&bus->eb_mtx); next_device = TAILQ_NEXT(device, links); if (next_device) next_device->refcount++; mtx_unlock(&bus->eb_mtx); xpt_release_device(device); } return(retval); } static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_eb *bus; struct cam_periph *periph, *next_periph; int retval; retval = 1; bus = device->target->bus; if (start_periph) periph = start_periph; else { xpt_lock_buses(); mtx_lock(&bus->eb_mtx); periph = SLIST_FIRST(&device->periphs); while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0) periph = SLIST_NEXT(periph, periph_links); if (periph == NULL) { mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); return (retval); } periph->refcount++; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); } for (; periph != NULL; periph = next_periph) { retval = tr_func(periph, arg); if (retval == 0) { cam_periph_release_locked(periph); break; } xpt_lock_buses(); mtx_lock(&bus->eb_mtx); next_periph = SLIST_NEXT(periph, periph_links); while (next_periph != NULL && (next_periph->flags & CAM_PERIPH_FREE) != 0) next_periph = SLIST_NEXT(periph, periph_links); if (next_periph) next_periph->refcount++; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); cam_periph_release_locked(periph); } return(retval); } static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg) { struct periph_driver **pdrv; int retval; retval = 1; /* * We don't traverse the peripheral driver list like we do the * other lists, because it is a linker set, and therefore cannot be * changed during runtime. If the peripheral driver list is ever * re-done to be something other than a linker set (i.e. it can * change while the system is running), the list traversal should * be modified to work like the other traversal functions. */ for (pdrv = (start_pdrv ? start_pdrv : periph_drivers); *pdrv != NULL; pdrv++) { retval = tr_func(pdrv, arg); if (retval == 0) return(retval); } return(retval); } static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_periph *periph, *next_periph; int retval; retval = 1; if (start_periph) periph = start_periph; else { xpt_lock_buses(); periph = TAILQ_FIRST(&(*pdrv)->units); while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0) periph = TAILQ_NEXT(periph, unit_links); if (periph == NULL) { xpt_unlock_buses(); return (retval); } periph->refcount++; xpt_unlock_buses(); } for (; periph != NULL; periph = next_periph) { cam_periph_lock(periph); retval = tr_func(periph, arg); cam_periph_unlock(periph); if (retval == 0) { cam_periph_release(periph); break; } xpt_lock_buses(); next_periph = TAILQ_NEXT(periph, unit_links); while (next_periph != NULL && (next_periph->flags & CAM_PERIPH_FREE) != 0) next_periph = TAILQ_NEXT(periph, unit_links); if (next_periph) next_periph->refcount++; xpt_unlock_buses(); cam_periph_release(periph); } return(retval); } static int xptdefbusfunc(struct cam_eb *bus, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_BUS) { xpt_busfunc_t *tr_func; tr_func = (xpt_busfunc_t *)tr_config->tr_func; return(tr_func(bus, tr_config->tr_arg)); } else return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg)); } static int xptdeftargetfunc(struct cam_et *target, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_TARGET) { xpt_targetfunc_t *tr_func; tr_func = (xpt_targetfunc_t *)tr_config->tr_func; return(tr_func(target, tr_config->tr_arg)); } else return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg)); } static int xptdefdevicefunc(struct cam_ed *device, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_DEVICE) { xpt_devicefunc_t *tr_func; tr_func = (xpt_devicefunc_t *)tr_config->tr_func; return(tr_func(device, tr_config->tr_arg)); } else return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg)); } static int xptdefperiphfunc(struct cam_periph *periph, void *arg) { struct xpt_traverse_config *tr_config; xpt_periphfunc_t *tr_func; tr_config = (struct xpt_traverse_config *)arg; tr_func = (xpt_periphfunc_t *)tr_config->tr_func; /* * Unlike the other default functions, we don't check for depth * here. The peripheral driver level is the last level in the EDT, * so if we're here, we should execute the function in question. */ return(tr_func(periph, tr_config->tr_arg)); } /* * Execute the given function for every bus in the EDT. */ static int xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_BUS; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } /* * Execute the given function for every device in the EDT. */ static int xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_DEVICE; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } static int xptsetasyncfunc(struct cam_ed *device, void *arg) { struct cam_path path; struct ccb_getdev cgd; struct ccb_setasync *csa = (struct ccb_setasync *)arg; /* * Don't report unconfigured devices (Wildcard devs, * devices only for target mode, device instances * that have been invalidated but are waiting for * their last reference count to be released). */ if ((device->flags & CAM_DEV_UNCONFIGURED) != 0) return (1); xpt_compile_path(&path, NULL, device->target->bus->path_id, device->target->target_id, device->lun_id); xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); csa->callback(csa->callback_arg, AC_FOUND_DEVICE, &path, &cgd); xpt_release_path(&path); return(1); } static int xptsetasyncbusfunc(struct cam_eb *bus, void *arg) { struct cam_path path; struct ccb_pathinq cpi; struct ccb_setasync *csa = (struct ccb_setasync *)arg; xpt_compile_path(&path, /*periph*/NULL, bus->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); xpt_path_lock(&path); xpt_setup_ccb(&cpi.ccb_h, &path, CAM_PRIORITY_NORMAL); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); csa->callback(csa->callback_arg, AC_PATH_REGISTERED, &path, &cpi); xpt_path_unlock(&path); xpt_release_path(&path); return(1); } void xpt_action(union ccb *start_ccb) { CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action\n")); start_ccb->ccb_h.status = CAM_REQ_INPROG; (*(start_ccb->ccb_h.path->bus->xport->action))(start_ccb); } void xpt_action_default(union ccb *start_ccb) { struct cam_path *path; struct cam_sim *sim; int lock; path = start_ccb->ccb_h.path; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default\n")); switch (start_ccb->ccb_h.func_code) { case XPT_SCSI_IO: { struct cam_ed *device; /* * For the sake of compatibility with SCSI-1 * devices that may not understand the identify * message, we include lun information in the * second byte of all commands. SCSI-1 specifies * that luns are a 3 bit value and reserves only 3 * bits for lun information in the CDB. Later * revisions of the SCSI spec allow for more than 8 * luns, but have deprecated lun information in the * CDB. So, if the lun won't fit, we must omit. * * Also be aware that during initial probing for devices, * the inquiry information is unknown but initialized to 0. * This means that this code will be exercised while probing * devices with an ANSI revision greater than 2. */ device = path->device; if (device->protocol_version <= SCSI_REV_2 && start_ccb->ccb_h.target_lun < 8 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) { start_ccb->csio.cdb_io.cdb_bytes[1] |= start_ccb->ccb_h.target_lun << 5; } start_ccb->csio.scsi_status = SCSI_STATUS_OK; } /* FALLTHROUGH */ case XPT_TARGET_IO: case XPT_CONT_TARGET_IO: start_ccb->csio.sense_resid = 0; start_ccb->csio.resid = 0; /* FALLTHROUGH */ case XPT_ATA_IO: if (start_ccb->ccb_h.func_code == XPT_ATA_IO) start_ccb->ataio.resid = 0; /* FALLTHROUGH */ case XPT_RESET_DEV: case XPT_ENG_EXEC: case XPT_SMP_IO: { struct cam_devq *devq; devq = path->bus->sim->devq; mtx_lock(&devq->send_mtx); cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb); if (xpt_schedule_devq(devq, path->device) != 0) xpt_run_devq(devq); mtx_unlock(&devq->send_mtx); break; } case XPT_CALC_GEOMETRY: /* Filter out garbage */ if (start_ccb->ccg.block_size == 0 || start_ccb->ccg.volume_size == 0) { start_ccb->ccg.cylinders = 0; start_ccb->ccg.heads = 0; start_ccb->ccg.secs_per_track = 0; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } #if defined(PC98) || defined(__sparc64__) /* * In a PC-98 system, geometry translation depens on * the "real" device geometry obtained from mode page 4. * SCSI geometry translation is performed in the * initialization routine of the SCSI BIOS and the result * stored in host memory. If the translation is available * in host memory, use it. If not, rely on the default * translation the device driver performs. * For sparc64, we may need adjust the geometry of large * disks in order to fit the limitations of the 16-bit * fields of the VTOC8 disk label. */ if (scsi_da_bios_params(&start_ccb->ccg) != 0) { start_ccb->ccb_h.status = CAM_REQ_CMP; break; } #endif goto call_sim; case XPT_ABORT: { union ccb* abort_ccb; abort_ccb = start_ccb->cab.abort_ccb; if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) { if (abort_ccb->ccb_h.pinfo.index >= 0) { struct cam_ccbq *ccbq; struct cam_ed *device; device = abort_ccb->ccb_h.path->device; ccbq = &device->ccbq; cam_ccbq_remove_ccb(ccbq, abort_ccb); abort_ccb->ccb_h.status = CAM_REQ_ABORTED|CAM_DEV_QFRZN; xpt_freeze_devq(abort_ccb->ccb_h.path, 1); xpt_done(abort_ccb); start_ccb->ccb_h.status = CAM_REQ_CMP; break; } if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) { /* * We've caught this ccb en route to * the SIM. Flag it for abort and the * SIM will do so just before starting * real work on the CCB. */ abort_ccb->ccb_h.status = CAM_REQ_ABORTED|CAM_DEV_QFRZN; xpt_freeze_devq(abort_ccb->ccb_h.path, 1); start_ccb->ccb_h.status = CAM_REQ_CMP; break; } } if (XPT_FC_IS_QUEUED(abort_ccb) && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) { /* * It's already completed but waiting * for our SWI to get to it. */ start_ccb->ccb_h.status = CAM_UA_ABORT; break; } /* * If we weren't able to take care of the abort request * in the XPT, pass the request down to the SIM for processing. */ } /* FALLTHROUGH */ case XPT_ACCEPT_TARGET_IO: case XPT_EN_LUN: case XPT_IMMED_NOTIFY: case XPT_NOTIFY_ACK: case XPT_RESET_BUS: case XPT_IMMEDIATE_NOTIFY: case XPT_NOTIFY_ACKNOWLEDGE: case XPT_GET_SIM_KNOB: case XPT_SET_SIM_KNOB: case XPT_GET_TRAN_SETTINGS: case XPT_SET_TRAN_SETTINGS: case XPT_PATH_INQ: call_sim: sim = path->bus->sim; lock = (mtx_owned(sim->mtx) == 0); if (lock) CAM_SIM_LOCK(sim); (*(sim->sim_action))(sim, start_ccb); if (lock) CAM_SIM_UNLOCK(sim); break; case XPT_PATH_STATS: start_ccb->cpis.last_reset = path->bus->last_reset; start_ccb->ccb_h.status = CAM_REQ_CMP; break; case XPT_GDEV_TYPE: { struct cam_ed *dev; dev = path->device; if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) { start_ccb->ccb_h.status = CAM_DEV_NOT_THERE; } else { struct ccb_getdev *cgd; cgd = &start_ccb->cgd; cgd->protocol = dev->protocol; cgd->inq_data = dev->inq_data; cgd->ident_data = dev->ident_data; cgd->inq_flags = dev->inq_flags; cgd->ccb_h.status = CAM_REQ_CMP; cgd->serial_num_len = dev->serial_num_len; if ((dev->serial_num_len > 0) && (dev->serial_num != NULL)) bcopy(dev->serial_num, cgd->serial_num, dev->serial_num_len); } break; } case XPT_GDEV_STATS: { struct cam_ed *dev; dev = path->device; if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) { start_ccb->ccb_h.status = CAM_DEV_NOT_THERE; } else { struct ccb_getdevstats *cgds; struct cam_eb *bus; struct cam_et *tar; cgds = &start_ccb->cgds; bus = path->bus; tar = path->target; cgds->dev_openings = dev->ccbq.dev_openings; cgds->dev_active = dev->ccbq.dev_active; cgds->devq_openings = dev->ccbq.devq_openings; cgds->devq_queued = cam_ccbq_pending_ccb_count(&dev->ccbq); cgds->held = dev->ccbq.held; cgds->last_reset = tar->last_reset; cgds->maxtags = dev->maxtags; cgds->mintags = dev->mintags; if (timevalcmp(&tar->last_reset, &bus->last_reset, <)) cgds->last_reset = bus->last_reset; cgds->ccb_h.status = CAM_REQ_CMP; } break; } case XPT_GDEVLIST: { struct cam_periph *nperiph; struct periph_list *periph_head; struct ccb_getdevlist *cgdl; u_int i; struct cam_ed *device; int found; found = 0; /* * Don't want anyone mucking with our data. */ device = path->device; periph_head = &device->periphs; cgdl = &start_ccb->cgdl; /* * Check and see if the list has changed since the user * last requested a list member. If so, tell them that the * list has changed, and therefore they need to start over * from the beginning. */ if ((cgdl->index != 0) && (cgdl->generation != device->generation)) { cgdl->status = CAM_GDEVLIST_LIST_CHANGED; break; } /* * Traverse the list of peripherals and attempt to find * the requested peripheral. */ for (nperiph = SLIST_FIRST(periph_head), i = 0; (nperiph != NULL) && (i <= cgdl->index); nperiph = SLIST_NEXT(nperiph, periph_links), i++) { if (i == cgdl->index) { strncpy(cgdl->periph_name, nperiph->periph_name, DEV_IDLEN); cgdl->unit_number = nperiph->unit_number; found = 1; } } if (found == 0) { cgdl->status = CAM_GDEVLIST_ERROR; break; } if (nperiph == NULL) cgdl->status = CAM_GDEVLIST_LAST_DEVICE; else cgdl->status = CAM_GDEVLIST_MORE_DEVS; cgdl->index++; cgdl->generation = device->generation; cgdl->ccb_h.status = CAM_REQ_CMP; break; } case XPT_DEV_MATCH: { dev_pos_type position_type; struct ccb_dev_match *cdm; cdm = &start_ccb->cdm; /* * There are two ways of getting at information in the EDT. * The first way is via the primary EDT tree. It starts * with a list of busses, then a list of targets on a bus, * then devices/luns on a target, and then peripherals on a * device/lun. The "other" way is by the peripheral driver * lists. The peripheral driver lists are organized by * peripheral driver. (obviously) So it makes sense to * use the peripheral driver list if the user is looking * for something like "da1", or all "da" devices. If the * user is looking for something on a particular bus/target * or lun, it's generally better to go through the EDT tree. */ if (cdm->pos.position_type != CAM_DEV_POS_NONE) position_type = cdm->pos.position_type; else { u_int i; position_type = CAM_DEV_POS_NONE; for (i = 0; i < cdm->num_patterns; i++) { if ((cdm->patterns[i].type == DEV_MATCH_BUS) ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){ position_type = CAM_DEV_POS_EDT; break; } } if (cdm->num_patterns == 0) position_type = CAM_DEV_POS_EDT; else if (position_type == CAM_DEV_POS_NONE) position_type = CAM_DEV_POS_PDRV; } switch(position_type & CAM_DEV_POS_TYPEMASK) { case CAM_DEV_POS_EDT: xptedtmatch(cdm); break; case CAM_DEV_POS_PDRV: xptperiphlistmatch(cdm); break; default: cdm->status = CAM_DEV_MATCH_ERROR; break; } if (cdm->status == CAM_DEV_MATCH_ERROR) start_ccb->ccb_h.status = CAM_REQ_CMP_ERR; else start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_SASYNC_CB: { struct ccb_setasync *csa; struct async_node *cur_entry; struct async_list *async_head; u_int32_t added; csa = &start_ccb->csa; added = csa->event_enable; async_head = &path->device->asyncs; /* * If there is already an entry for us, simply * update it. */ cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { if ((cur_entry->callback_arg == csa->callback_arg) && (cur_entry->callback == csa->callback)) break; cur_entry = SLIST_NEXT(cur_entry, links); } if (cur_entry != NULL) { /* * If the request has no flags set, * remove the entry. */ added &= ~cur_entry->event_enable; if (csa->event_enable == 0) { SLIST_REMOVE(async_head, cur_entry, async_node, links); xpt_release_device(path->device); free(cur_entry, M_CAMXPT); } else { cur_entry->event_enable = csa->event_enable; } csa->event_enable = added; } else { cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT, M_NOWAIT); if (cur_entry == NULL) { csa->ccb_h.status = CAM_RESRC_UNAVAIL; break; } cur_entry->event_enable = csa->event_enable; cur_entry->event_lock = mtx_owned(path->bus->sim->mtx) ? 1 : 0; cur_entry->callback_arg = csa->callback_arg; cur_entry->callback = csa->callback; SLIST_INSERT_HEAD(async_head, cur_entry, links); xpt_acquire_device(path->device); } start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_REL_SIMQ: { struct ccb_relsim *crs; struct cam_ed *dev; crs = &start_ccb->crs; dev = path->device; if (dev == NULL) { crs->ccb_h.status = CAM_DEV_NOT_THERE; break; } if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) { /* Don't ever go below one opening */ if (crs->openings > 0) { xpt_dev_ccbq_resize(path, crs->openings); if (bootverbose) { xpt_print(path, "number of openings is now %d\n", crs->openings); } } } mtx_lock(&dev->sim->devq->send_mtx); if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) { if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { /* * Just extend the old timeout and decrement * the freeze count so that a single timeout * is sufficient for releasing the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; callout_stop(&dev->callout); } else { start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } callout_reset(&dev->callout, (crs->release_timeout * hz) / 1000, xpt_release_devq_timeout, dev); dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING; } if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) { if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) { /* * Decrement the freeze count so that a single * completion is still sufficient to unfreeze * the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_COMPLETE; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) { if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 || (dev->ccbq.dev_active == 0)) { start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } mtx_unlock(&dev->sim->devq->send_mtx); if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0) xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE); start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_DEBUG: { struct cam_path *oldpath; /* Check that all request bits are supported. */ if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) { start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; break; } cam_dflags = CAM_DEBUG_NONE; if (cam_dpath != NULL) { oldpath = cam_dpath; cam_dpath = NULL; xpt_free_path(oldpath); } if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, NULL, start_ccb->ccb_h.path_id, start_ccb->ccb_h.target_id, start_ccb->ccb_h.target_lun) != CAM_REQ_CMP) { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; } else { cam_dflags = start_ccb->cdbg.flags; start_ccb->ccb_h.status = CAM_REQ_CMP; xpt_print(cam_dpath, "debugging flags now %x\n", cam_dflags); } } else start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_NOOP: if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) xpt_freeze_devq(path, 1); start_ccb->ccb_h.status = CAM_REQ_CMP; break; default: case XPT_SDEV_TYPE: case XPT_TERM_IO: case XPT_ENG_INQ: /* XXX Implement */ printf("%s: CCB type %#x not supported\n", __func__, start_ccb->ccb_h.func_code); start_ccb->ccb_h.status = CAM_PROVIDE_FAIL; if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) { xpt_done(start_ccb); } break; } } void xpt_polled_action(union ccb *start_ccb) { u_int32_t timeout; struct cam_sim *sim; struct cam_devq *devq; struct cam_ed *dev; timeout = start_ccb->ccb_h.timeout * 10; sim = start_ccb->ccb_h.path->bus->sim; devq = sim->devq; dev = start_ccb->ccb_h.path->device; mtx_unlock(&dev->device_mtx); /* * Steal an opening so that no other queued requests * can get it before us while we simulate interrupts. */ mtx_lock(&devq->send_mtx); dev->ccbq.devq_openings--; dev->ccbq.dev_openings--; while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) && (--timeout > 0)) { mtx_unlock(&devq->send_mtx); DELAY(100); CAM_SIM_LOCK(sim); (*(sim->sim_poll))(sim); CAM_SIM_UNLOCK(sim); camisr_runqueue(); mtx_lock(&devq->send_mtx); } dev->ccbq.devq_openings++; dev->ccbq.dev_openings++; mtx_unlock(&devq->send_mtx); if (timeout != 0) { xpt_action(start_ccb); while(--timeout > 0) { CAM_SIM_LOCK(sim); (*(sim->sim_poll))(sim); CAM_SIM_UNLOCK(sim); camisr_runqueue(); if ((start_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) break; DELAY(100); } if (timeout == 0) { /* * XXX Is it worth adding a sim_timeout entry * point so we can attempt recovery? If * this is only used for dumps, I don't think * it is. */ start_ccb->ccb_h.status = CAM_CMD_TIMEOUT; } } else { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; } mtx_lock(&dev->device_mtx); } /* * Schedule a peripheral driver to receive a ccb when it's * target device has space for more transactions. */ void xpt_schedule(struct cam_periph *periph, u_int32_t new_priority) { CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n")); cam_periph_assert(periph, MA_OWNED); if (new_priority < periph->scheduled_priority) { periph->scheduled_priority = new_priority; xpt_run_allocq(periph, 0); } } /* * Schedule a device to run on a given queue. * If the device was inserted as a new entry on the queue, * return 1 meaning the device queue should be run. If we * were already queued, implying someone else has already * started the queue, return 0 so the caller doesn't attempt * to run the queue. */ static int xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo, u_int32_t new_priority) { int retval; u_int32_t old_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n")); old_priority = pinfo->priority; /* * Are we already queued? */ if (pinfo->index != CAM_UNQUEUED_INDEX) { /* Simply reorder based on new priority */ if (new_priority < old_priority) { camq_change_priority(queue, pinfo->index, new_priority); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("changed priority to %d\n", new_priority)); retval = 1; } else retval = 0; } else { /* New entry on the queue */ if (new_priority < old_priority) pinfo->priority = new_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("Inserting onto queue\n")); pinfo->generation = ++queue->generation; camq_insert(queue, pinfo); retval = 1; } return (retval); } static void xpt_run_allocq_task(void *context, int pending) { struct cam_periph *periph = context; cam_periph_lock(periph); periph->flags &= ~CAM_PERIPH_RUN_TASK; xpt_run_allocq(periph, 1); cam_periph_unlock(periph); cam_periph_release(periph); } static void xpt_run_allocq(struct cam_periph *periph, int sleep) { struct cam_ed *device; union ccb *ccb; uint32_t prio; cam_periph_assert(periph, MA_OWNED); if (periph->periph_allocating) return; periph->periph_allocating = 1; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph)); device = periph->path->device; ccb = NULL; restart: while ((prio = min(periph->scheduled_priority, periph->immediate_priority)) != CAM_PRIORITY_NONE && (periph->periph_allocated - (ccb != NULL ? 1 : 0) < device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) { if (ccb == NULL && (ccb = xpt_get_ccb_nowait(periph)) == NULL) { if (sleep) { ccb = xpt_get_ccb(periph); goto restart; } if (periph->flags & CAM_PERIPH_RUN_TASK) break; - xpt_lock_buses(); - periph->refcount++; /* Unconditionally acquire */ - xpt_unlock_buses(); + cam_periph_doacquire(periph); periph->flags |= CAM_PERIPH_RUN_TASK; taskqueue_enqueue(xsoftc.xpt_taskq, &periph->periph_run_task); break; } xpt_setup_ccb(&ccb->ccb_h, periph->path, prio); if (prio == periph->immediate_priority) { periph->immediate_priority = CAM_PRIORITY_NONE; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("waking cam_periph_getccb()\n")); SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h, periph_links.sle); wakeup(&periph->ccb_list); } else { periph->scheduled_priority = CAM_PRIORITY_NONE; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("calling periph_start()\n")); periph->periph_start(periph, ccb); } ccb = NULL; } if (ccb != NULL) xpt_release_ccb(ccb); periph->periph_allocating = 0; } static void xpt_run_devq(struct cam_devq *devq) { char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1]; int lock; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n")); devq->send_queue.qfrozen_cnt++; while ((devq->send_queue.entries > 0) && (devq->send_openings > 0) && (devq->send_queue.qfrozen_cnt <= 1)) { struct cam_ed *device; union ccb *work_ccb; struct cam_sim *sim; device = (struct cam_ed *)camq_remove(&devq->send_queue, CAMQ_HEAD); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("running device %p\n", device)); work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD); if (work_ccb == NULL) { printf("device on run queue with no ccbs???\n"); continue; } if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) { mtx_lock(&xsoftc.xpt_highpower_lock); if (xsoftc.num_highpower <= 0) { /* * We got a high power command, but we * don't have any available slots. Freeze * the device queue until we have a slot * available. */ xpt_freeze_devq_device(device, 1); STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device, highpowerq_entry); mtx_unlock(&xsoftc.xpt_highpower_lock); continue; } else { /* * Consume a high power slot while * this ccb runs. */ xsoftc.num_highpower--; } mtx_unlock(&xsoftc.xpt_highpower_lock); } cam_ccbq_remove_ccb(&device->ccbq, work_ccb); cam_ccbq_send_ccb(&device->ccbq, work_ccb); devq->send_openings--; devq->send_active++; xpt_schedule_devq(devq, device); mtx_unlock(&devq->send_mtx); if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) { /* * The client wants to freeze the queue * after this CCB is sent. */ xpt_freeze_devq(work_ccb->ccb_h.path, 1); } /* In Target mode, the peripheral driver knows best... */ if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) { if ((device->inq_flags & SID_CmdQue) != 0 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE) work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID; else /* * Clear this in case of a retried CCB that * failed due to a rejected tag. */ work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; } switch (work_ccb->ccb_h.func_code) { case XPT_SCSI_IO: CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_CDB,("%s. CDB: %s\n", scsi_op_desc(work_ccb->csio.cdb_io.cdb_bytes[0], &device->inq_data), scsi_cdb_string(work_ccb->csio.cdb_io.cdb_bytes, cdb_str, sizeof(cdb_str)))); break; case XPT_ATA_IO: CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_CDB,("%s. ACB: %s\n", ata_op_string(&work_ccb->ataio.cmd), ata_cmd_string(&work_ccb->ataio.cmd, cdb_str, sizeof(cdb_str)))); break; default: break; } /* * Device queues can be shared among multiple SIM instances * that reside on different busses. Use the SIM from the * queued device, rather than the one from the calling bus. */ sim = device->sim; lock = (mtx_owned(sim->mtx) == 0); if (lock) CAM_SIM_LOCK(sim); (*(sim->sim_action))(sim, work_ccb); if (lock) CAM_SIM_UNLOCK(sim); mtx_lock(&devq->send_mtx); } devq->send_queue.qfrozen_cnt--; } /* * This function merges stuff from the slave ccb into the master ccb, while * keeping important fields in the master ccb constant. */ void xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb) { /* * Pull fields that are valid for peripheral drivers to set * into the master CCB along with the CCB "payload". */ master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count; master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code; master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout; master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags; bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); } void xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n")); ccb_h->pinfo.priority = priority; ccb_h->path = path; ccb_h->path_id = path->bus->path_id; if (path->target) ccb_h->target_id = path->target->target_id; else ccb_h->target_id = CAM_TARGET_WILDCARD; if (path->device) { ccb_h->target_lun = path->device->lun_id; ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation; } else { ccb_h->target_lun = CAM_TARGET_WILDCARD; } ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; ccb_h->flags = 0; ccb_h->xflags = 0; } /* Path manipulation functions */ cam_status xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_path *path; cam_status status; path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT); if (path == NULL) { status = CAM_RESRC_UNAVAIL; return(status); } status = xpt_compile_path(path, perph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) { free(path, M_CAMPATH); path = NULL; } *new_path_ptr = path; return (status); } cam_status xpt_create_path_unlocked(struct cam_path **new_path_ptr, struct cam_periph *periph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { return (xpt_create_path(new_path_ptr, periph, path_id, target_id, lun_id)); } cam_status xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_eb *bus; struct cam_et *target; struct cam_ed *device; cam_status status; status = CAM_REQ_CMP; /* Completed without error */ target = NULL; /* Wildcarded */ device = NULL; /* Wildcarded */ /* * We will potentially modify the EDT, so block interrupts * that may attempt to create cam paths. */ bus = xpt_find_bus(path_id); if (bus == NULL) { status = CAM_PATH_INVALID; } else { xpt_lock_buses(); mtx_lock(&bus->eb_mtx); target = xpt_find_target(bus, target_id); if (target == NULL) { /* Create one */ struct cam_et *new_target; new_target = xpt_alloc_target(bus, target_id); if (new_target == NULL) { status = CAM_RESRC_UNAVAIL; } else { target = new_target; } } xpt_unlock_buses(); if (target != NULL) { device = xpt_find_device(target, lun_id); if (device == NULL) { /* Create one */ struct cam_ed *new_device; new_device = (*(bus->xport->alloc_device))(bus, target, lun_id); if (new_device == NULL) { status = CAM_RESRC_UNAVAIL; } else { device = new_device; } } } mtx_unlock(&bus->eb_mtx); } /* * Only touch the user's data if we are successful. */ if (status == CAM_REQ_CMP) { new_path->periph = perph; new_path->bus = bus; new_path->target = target; new_path->device = device; CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n")); } else { if (device != NULL) xpt_release_device(device); if (target != NULL) xpt_release_target(target); if (bus != NULL) xpt_release_bus(bus); } return (status); } cam_status xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path) { struct cam_path *new_path; new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT); if (new_path == NULL) return(CAM_RESRC_UNAVAIL); xpt_copy_path(new_path, path); *new_path_ptr = new_path; return (CAM_REQ_CMP); } void xpt_copy_path(struct cam_path *new_path, struct cam_path *path) { *new_path = *path; if (path->bus != NULL) xpt_acquire_bus(path->bus); if (path->target != NULL) xpt_acquire_target(path->target); if (path->device != NULL) xpt_acquire_device(path->device); } void xpt_release_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n")); if (path->device != NULL) { xpt_release_device(path->device); path->device = NULL; } if (path->target != NULL) { xpt_release_target(path->target); path->target = NULL; } if (path->bus != NULL) { xpt_release_bus(path->bus); path->bus = NULL; } } void xpt_free_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n")); xpt_release_path(path); free(path, M_CAMPATH); } void xpt_path_counts(struct cam_path *path, uint32_t *bus_ref, uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref) { xpt_lock_buses(); if (bus_ref) { if (path->bus) *bus_ref = path->bus->refcount; else *bus_ref = 0; } if (periph_ref) { if (path->periph) *periph_ref = path->periph->refcount; else *periph_ref = 0; } xpt_unlock_buses(); if (target_ref) { if (path->target) *target_ref = path->target->refcount; else *target_ref = 0; } if (device_ref) { if (path->device) *device_ref = path->device->refcount; else *device_ref = 0; } } /* * Return -1 for failure, 0 for exact match, 1 for match with wildcards * in path1, 2 for match with wildcards in path2. */ int xpt_path_comp(struct cam_path *path1, struct cam_path *path2) { int retval = 0; if (path1->bus != path2->bus) { if (path1->bus->path_id == CAM_BUS_WILDCARD) retval = 1; else if (path2->bus->path_id == CAM_BUS_WILDCARD) retval = 2; else return (-1); } if (path1->target != path2->target) { if (path1->target->target_id == CAM_TARGET_WILDCARD) { if (retval == 0) retval = 1; } else if (path2->target->target_id == CAM_TARGET_WILDCARD) retval = 2; else return (-1); } if (path1->device != path2->device) { if (path1->device->lun_id == CAM_LUN_WILDCARD) { if (retval == 0) retval = 1; } else if (path2->device->lun_id == CAM_LUN_WILDCARD) retval = 2; else return (-1); } return (retval); } int xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev) { int retval = 0; if (path->bus != dev->target->bus) { if (path->bus->path_id == CAM_BUS_WILDCARD) retval = 1; else if (dev->target->bus->path_id == CAM_BUS_WILDCARD) retval = 2; else return (-1); } if (path->target != dev->target) { if (path->target->target_id == CAM_TARGET_WILDCARD) { if (retval == 0) retval = 1; } else if (dev->target->target_id == CAM_TARGET_WILDCARD) retval = 2; else return (-1); } if (path->device != dev) { if (path->device->lun_id == CAM_LUN_WILDCARD) { if (retval == 0) retval = 1; } else if (dev->lun_id == CAM_LUN_WILDCARD) retval = 2; else return (-1); } return (retval); } void xpt_print_path(struct cam_path *path) { if (path == NULL) printf("(nopath): "); else { if (path->periph != NULL) printf("(%s%d:", path->periph->periph_name, path->periph->unit_number); else printf("(noperiph:"); if (path->bus != NULL) printf("%s%d:%d:", path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id); else printf("nobus:"); if (path->target != NULL) printf("%d:", path->target->target_id); else printf("X:"); if (path->device != NULL) printf("%jx): ", (uintmax_t)path->device->lun_id); else printf("X): "); } } void xpt_print_device(struct cam_ed *device) { if (device == NULL) printf("(nopath): "); else { printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name, device->sim->unit_number, device->sim->bus_id, device->target->target_id, (uintmax_t)device->lun_id); } } void xpt_print(struct cam_path *path, const char *fmt, ...) { va_list ap; xpt_print_path(path); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); } int xpt_path_string(struct cam_path *path, char *str, size_t str_len) { struct sbuf sb; sbuf_new(&sb, str, str_len, 0); if (path == NULL) sbuf_printf(&sb, "(nopath): "); else { if (path->periph != NULL) sbuf_printf(&sb, "(%s%d:", path->periph->periph_name, path->periph->unit_number); else sbuf_printf(&sb, "(noperiph:"); if (path->bus != NULL) sbuf_printf(&sb, "%s%d:%d:", path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id); else sbuf_printf(&sb, "nobus:"); if (path->target != NULL) sbuf_printf(&sb, "%d:", path->target->target_id); else sbuf_printf(&sb, "X:"); if (path->device != NULL) sbuf_printf(&sb, "%jx): ", (uintmax_t)path->device->lun_id); else sbuf_printf(&sb, "X): "); } sbuf_finish(&sb); return(sbuf_len(&sb)); } path_id_t xpt_path_path_id(struct cam_path *path) { return(path->bus->path_id); } target_id_t xpt_path_target_id(struct cam_path *path) { if (path->target != NULL) return (path->target->target_id); else return (CAM_TARGET_WILDCARD); } lun_id_t xpt_path_lun_id(struct cam_path *path) { if (path->device != NULL) return (path->device->lun_id); else return (CAM_LUN_WILDCARD); } struct cam_sim * xpt_path_sim(struct cam_path *path) { return (path->bus->sim); } struct cam_periph* xpt_path_periph(struct cam_path *path) { return (path->periph); } int xpt_path_legacy_ata_id(struct cam_path *path) { struct cam_eb *bus; int bus_id; if ((strcmp(path->bus->sim->sim_name, "ata") != 0) && strcmp(path->bus->sim->sim_name, "ahcich") != 0 && strcmp(path->bus->sim->sim_name, "mvsch") != 0 && strcmp(path->bus->sim->sim_name, "siisch") != 0) return (-1); if (strcmp(path->bus->sim->sim_name, "ata") == 0 && path->bus->sim->unit_number < 2) { bus_id = path->bus->sim->unit_number; } else { bus_id = 2; xpt_lock_buses(); TAILQ_FOREACH(bus, &xsoftc.xpt_busses, links) { if (bus == path->bus) break; if ((strcmp(bus->sim->sim_name, "ata") == 0 && bus->sim->unit_number >= 2) || strcmp(bus->sim->sim_name, "ahcich") == 0 || strcmp(bus->sim->sim_name, "mvsch") == 0 || strcmp(bus->sim->sim_name, "siisch") == 0) bus_id++; } xpt_unlock_buses(); } if (path->target != NULL) { if (path->target->target_id < 2) return (bus_id * 2 + path->target->target_id); else return (-1); } else return (bus_id * 2); } /* * Release a CAM control block for the caller. Remit the cost of the structure * to the device referenced by the path. If the this device had no 'credits' * and peripheral drivers have registered async callbacks for this notification * call them now. */ void xpt_release_ccb(union ccb *free_ccb) { struct cam_ed *device; struct cam_periph *periph; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n")); xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED); device = free_ccb->ccb_h.path->device; periph = free_ccb->ccb_h.path->periph; xpt_free_ccb(free_ccb); periph->periph_allocated--; cam_ccbq_release_opening(&device->ccbq); xpt_run_allocq(periph, 0); } /* Functions accessed by SIM drivers */ static struct xpt_xport xport_default = { .alloc_device = xpt_alloc_device_default, .action = xpt_action_default, .async = xpt_dev_async_default, }; /* * A sim structure, listing the SIM entry points and instance * identification info is passed to xpt_bus_register to hook the SIM * into the CAM framework. xpt_bus_register creates a cam_eb entry * for this new bus and places it in the array of busses and assigns * it a path_id. The path_id may be influenced by "hard wiring" * information specified by the user. Once interrupt services are * available, the bus will be probed. */ int32_t xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus) { struct cam_eb *new_bus; struct cam_eb *old_bus; struct ccb_pathinq cpi; struct cam_path *path; cam_status status; mtx_assert(sim->mtx, MA_OWNED); sim->bus_id = bus; new_bus = (struct cam_eb *)malloc(sizeof(*new_bus), M_CAMXPT, M_NOWAIT|M_ZERO); if (new_bus == NULL) { /* Couldn't satisfy request */ return (CAM_RESRC_UNAVAIL); } mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF); TAILQ_INIT(&new_bus->et_entries); cam_sim_hold(sim); new_bus->sim = sim; timevalclear(&new_bus->last_reset); new_bus->flags = 0; new_bus->refcount = 1; /* Held until a bus_deregister event */ new_bus->generation = 0; xpt_lock_buses(); sim->path_id = new_bus->path_id = xptpathid(sim->sim_name, sim->unit_number, sim->bus_id); old_bus = TAILQ_FIRST(&xsoftc.xpt_busses); while (old_bus != NULL && old_bus->path_id < new_bus->path_id) old_bus = TAILQ_NEXT(old_bus, links); if (old_bus != NULL) TAILQ_INSERT_BEFORE(old_bus, new_bus, links); else TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links); xsoftc.bus_generation++; xpt_unlock_buses(); /* * Set a default transport so that a PATH_INQ can be issued to * the SIM. This will then allow for probing and attaching of * a more appropriate transport. */ new_bus->xport = &xport_default; status = xpt_create_path(&path, /*periph*/NULL, sim->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) { xpt_release_bus(new_bus); free(path, M_CAMXPT); return (CAM_RESRC_UNAVAIL); } xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); if (cpi.ccb_h.status == CAM_REQ_CMP) { switch (cpi.transport) { case XPORT_SPI: case XPORT_SAS: case XPORT_FC: case XPORT_USB: case XPORT_ISCSI: case XPORT_SRP: case XPORT_PPB: new_bus->xport = scsi_get_xport(); break; case XPORT_ATA: case XPORT_SATA: new_bus->xport = ata_get_xport(); break; default: new_bus->xport = &xport_default; break; } } /* Notify interested parties */ if (sim->path_id != CAM_XPT_PATH_ID) { xpt_async(AC_PATH_REGISTERED, path, &cpi); if ((cpi.hba_misc & PIM_NOSCAN) == 0) { union ccb *scan_ccb; /* Initiate bus rescan. */ scan_ccb = xpt_alloc_ccb_nowait(); if (scan_ccb != NULL) { scan_ccb->ccb_h.path = path; scan_ccb->ccb_h.func_code = XPT_SCAN_BUS; scan_ccb->crcn.flags = 0; xpt_rescan(scan_ccb); } else xpt_print(path, "Can't allocate CCB to scan bus\n"); } else xpt_free_path(path); } else xpt_free_path(path); return (CAM_SUCCESS); } int32_t xpt_bus_deregister(path_id_t pathid) { struct cam_path bus_path; cam_status status; status = xpt_compile_path(&bus_path, NULL, pathid, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) return (status); xpt_async(AC_LOST_DEVICE, &bus_path, NULL); xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL); /* Release the reference count held while registered. */ xpt_release_bus(bus_path.bus); xpt_release_path(&bus_path); return (CAM_REQ_CMP); } static path_id_t xptnextfreepathid(void) { struct cam_eb *bus; path_id_t pathid; const char *strval; mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED); pathid = 0; bus = TAILQ_FIRST(&xsoftc.xpt_busses); retry: /* Find an unoccupied pathid */ while (bus != NULL && bus->path_id <= pathid) { if (bus->path_id == pathid) pathid++; bus = TAILQ_NEXT(bus, links); } /* * Ensure that this pathid is not reserved for * a bus that may be registered in the future. */ if (resource_string_value("scbus", pathid, "at", &strval) == 0) { ++pathid; /* Start the search over */ goto retry; } return (pathid); } static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus) { path_id_t pathid; int i, dunit, val; char buf[32]; const char *dname; pathid = CAM_XPT_PATH_ID; snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit); if (strcmp(buf, "xpt0") == 0 && sim_bus == 0) return (pathid); i = 0; while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) { if (strcmp(dname, "scbus")) { /* Avoid a bit of foot shooting. */ continue; } if (dunit < 0) /* unwired?! */ continue; if (resource_int_value("scbus", dunit, "bus", &val) == 0) { if (sim_bus == val) { pathid = dunit; break; } } else if (sim_bus == 0) { /* Unspecified matches bus 0 */ pathid = dunit; break; } else { printf("Ambiguous scbus configuration for %s%d " "bus %d, cannot wire down. The kernel " "config entry for scbus%d should " "specify a controller bus.\n" "Scbus will be assigned dynamically.\n", sim_name, sim_unit, sim_bus, dunit); break; } } if (pathid == CAM_XPT_PATH_ID) pathid = xptnextfreepathid(); return (pathid); } static const char * xpt_async_string(u_int32_t async_code) { switch (async_code) { case AC_BUS_RESET: return ("AC_BUS_RESET"); case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL"); case AC_SCSI_AEN: return ("AC_SCSI_AEN"); case AC_SENT_BDR: return ("AC_SENT_BDR"); case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED"); case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED"); case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE"); case AC_LOST_DEVICE: return ("AC_LOST_DEVICE"); case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG"); case AC_INQ_CHANGED: return ("AC_INQ_CHANGED"); case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED"); case AC_CONTRACT: return ("AC_CONTRACT"); case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED"); case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION"); } return ("AC_UNKNOWN"); } static int xpt_async_size(u_int32_t async_code) { switch (async_code) { case AC_BUS_RESET: return (0); case AC_UNSOL_RESEL: return (0); case AC_SCSI_AEN: return (0); case AC_SENT_BDR: return (0); case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq)); case AC_PATH_DEREGISTERED: return (0); case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev)); case AC_LOST_DEVICE: return (0); case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings)); case AC_INQ_CHANGED: return (0); case AC_GETDEV_CHANGED: return (0); case AC_CONTRACT: return (sizeof(struct ac_contract)); case AC_ADVINFO_CHANGED: return (-1); case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio)); } return (0); } static int xpt_async_process_dev(struct cam_ed *device, void *arg) { union ccb *ccb = arg; struct cam_path *path = ccb->ccb_h.path; void *async_arg = ccb->casync.async_arg_ptr; u_int32_t async_code = ccb->casync.async_code; int relock; if (path->device != device && path->device->lun_id != CAM_LUN_WILDCARD && device->lun_id != CAM_LUN_WILDCARD) return (1); /* * The async callback could free the device. * If it is a broadcast async, it doesn't hold * device reference, so take our own reference. */ xpt_acquire_device(device); /* * If async for specific device is to be delivered to * the wildcard client, take the specific device lock. * XXX: We may need a way for client to specify it. */ if ((device->lun_id == CAM_LUN_WILDCARD && path->device->lun_id != CAM_LUN_WILDCARD) || (device->target->target_id == CAM_TARGET_WILDCARD && path->target->target_id != CAM_TARGET_WILDCARD) || (device->target->bus->path_id == CAM_BUS_WILDCARD && path->target->bus->path_id != CAM_BUS_WILDCARD)) { mtx_unlock(&device->device_mtx); xpt_path_lock(path); relock = 1; } else relock = 0; (*(device->target->bus->xport->async))(async_code, device->target->bus, device->target, device, async_arg); xpt_async_bcast(&device->asyncs, async_code, path, async_arg); if (relock) { xpt_path_unlock(path); mtx_lock(&device->device_mtx); } xpt_release_device(device); return (1); } static int xpt_async_process_tgt(struct cam_et *target, void *arg) { union ccb *ccb = arg; struct cam_path *path = ccb->ccb_h.path; if (path->target != target && path->target->target_id != CAM_TARGET_WILDCARD && target->target_id != CAM_TARGET_WILDCARD) return (1); if (ccb->casync.async_code == AC_SENT_BDR) { /* Update our notion of when the last reset occurred */ microtime(&target->last_reset); } return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb)); } static void xpt_async_process(struct cam_periph *periph, union ccb *ccb) { struct cam_eb *bus; struct cam_path *path; void *async_arg; u_int32_t async_code; path = ccb->ccb_h.path; async_code = ccb->casync.async_code; async_arg = ccb->casync.async_arg_ptr; CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO, ("xpt_async(%s)\n", xpt_async_string(async_code))); bus = path->bus; if (async_code == AC_BUS_RESET) { /* Update our notion of when the last reset occurred */ microtime(&bus->last_reset); } xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb); /* * If this wasn't a fully wildcarded async, tell all * clients that want all async events. */ if (bus != xpt_periph->path->bus) { xpt_path_lock(xpt_periph->path); xpt_async_process_dev(xpt_periph->path->device, ccb); xpt_path_unlock(xpt_periph->path); } if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD) xpt_release_devq(path, 1, TRUE); else xpt_release_simq(path->bus->sim, TRUE); if (ccb->casync.async_arg_size > 0) free(async_arg, M_CAMXPT); xpt_free_path(path); xpt_free_ccb(ccb); } static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg) { struct async_node *cur_entry; int lock; cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { struct async_node *next_entry; /* * Grab the next list entry before we call the current * entry's callback. This is because the callback function * can delete its async callback entry. */ next_entry = SLIST_NEXT(cur_entry, links); if ((cur_entry->event_enable & async_code) != 0) { lock = cur_entry->event_lock; if (lock) CAM_SIM_LOCK(path->device->sim); cur_entry->callback(cur_entry->callback_arg, async_code, path, async_arg); if (lock) CAM_SIM_UNLOCK(path->device->sim); } cur_entry = next_entry; } } void xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg) { union ccb *ccb; int size; ccb = xpt_alloc_ccb_nowait(); if (ccb == NULL) { xpt_print(path, "Can't allocate CCB to send %s\n", xpt_async_string(async_code)); return; } if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) { xpt_print(path, "Can't allocate path to send %s\n", xpt_async_string(async_code)); xpt_free_ccb(ccb); return; } ccb->ccb_h.path->periph = NULL; ccb->ccb_h.func_code = XPT_ASYNC; ccb->ccb_h.cbfcnp = xpt_async_process; ccb->ccb_h.flags |= CAM_UNLOCKED; ccb->casync.async_code = async_code; ccb->casync.async_arg_size = 0; size = xpt_async_size(async_code); if (size > 0 && async_arg != NULL) { ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT); if (ccb->casync.async_arg_ptr == NULL) { xpt_print(path, "Can't allocate argument to send %s\n", xpt_async_string(async_code)); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } memcpy(ccb->casync.async_arg_ptr, async_arg, size); ccb->casync.async_arg_size = size; } else if (size < 0) ccb->casync.async_arg_size = size; if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD) xpt_freeze_devq(path, 1); else xpt_freeze_simq(path->bus->sim, 1); xpt_done(ccb); } static void xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; printf("%s called\n", __func__); } static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count) { struct cam_devq *devq; uint32_t freeze; devq = dev->sim->devq; mtx_assert(&devq->send_mtx, MA_OWNED); CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_freeze_devq_device(%d) %u->%u\n", count, dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count)); freeze = (dev->ccbq.queue.qfrozen_cnt += count); /* Remove frozen device from sendq. */ if (device_is_queued(dev)) camq_remove(&devq->send_queue, dev->devq_entry.index); return (freeze); } u_int32_t xpt_freeze_devq(struct cam_path *path, u_int count) { struct cam_ed *dev = path->device; struct cam_devq *devq; uint32_t freeze; devq = dev->sim->devq; mtx_lock(&devq->send_mtx); CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count)); freeze = xpt_freeze_devq_device(dev, count); mtx_unlock(&devq->send_mtx); return (freeze); } u_int32_t xpt_freeze_simq(struct cam_sim *sim, u_int count) { struct cam_devq *devq; uint32_t freeze; devq = sim->devq; mtx_lock(&devq->send_mtx); freeze = (devq->send_queue.qfrozen_cnt += count); mtx_unlock(&devq->send_mtx); return (freeze); } static void xpt_release_devq_timeout(void *arg) { struct cam_ed *dev; struct cam_devq *devq; dev = (struct cam_ed *)arg; CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n")); devq = dev->sim->devq; mtx_assert(&devq->send_mtx, MA_OWNED); if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE)) xpt_run_devq(devq); } void xpt_release_devq(struct cam_path *path, u_int count, int run_queue) { struct cam_ed *dev; struct cam_devq *devq; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n", count, run_queue)); dev = path->device; devq = dev->sim->devq; mtx_lock(&devq->send_mtx); if (xpt_release_devq_device(dev, count, run_queue)) xpt_run_devq(dev->sim->devq); mtx_unlock(&devq->send_mtx); } static int xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue) { mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED); CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue, dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count)); if (count > dev->ccbq.queue.qfrozen_cnt) { #ifdef INVARIANTS printf("xpt_release_devq(): requested %u > present %u\n", count, dev->ccbq.queue.qfrozen_cnt); #endif count = dev->ccbq.queue.qfrozen_cnt; } dev->ccbq.queue.qfrozen_cnt -= count; if (dev->ccbq.queue.qfrozen_cnt == 0) { /* * No longer need to wait for a successful * command completion. */ dev->flags &= ~CAM_DEV_REL_ON_COMPLETE; /* * Remove any timeouts that might be scheduled * to release this queue. */ if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { callout_stop(&dev->callout); dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING; } /* * Now that we are unfrozen schedule the * device so any pending transactions are * run. */ xpt_schedule_devq(dev->sim->devq, dev); } else run_queue = 0; return (run_queue); } void xpt_release_simq(struct cam_sim *sim, int run_queue) { struct cam_devq *devq; devq = sim->devq; mtx_lock(&devq->send_mtx); if (devq->send_queue.qfrozen_cnt <= 0) { #ifdef INVARIANTS printf("xpt_release_simq: requested 1 > present %u\n", devq->send_queue.qfrozen_cnt); #endif } else devq->send_queue.qfrozen_cnt--; if (devq->send_queue.qfrozen_cnt == 0) { /* * If there is a timeout scheduled to release this * sim queue, remove it. The queue frozen count is * already at 0. */ if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){ callout_stop(&sim->callout); sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING; } if (run_queue) { /* * Now that we are unfrozen run the send queue. */ xpt_run_devq(sim->devq); } } mtx_unlock(&devq->send_mtx); } /* * XXX Appears to be unused. */ static void xpt_release_simq_timeout(void *arg) { struct cam_sim *sim; sim = (struct cam_sim *)arg; xpt_release_simq(sim, /* run_queue */ TRUE); } void xpt_done(union ccb *done_ccb) { struct cam_doneq *queue; int run, hash; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n")); if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0) return; hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id + done_ccb->ccb_h.target_lun) % cam_num_doneqs; queue = &cam_doneqs[hash]; mtx_lock(&queue->cam_doneq_mtx); run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq)); STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe); done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX; mtx_unlock(&queue->cam_doneq_mtx); if (run) wakeup(&queue->cam_doneq); } void xpt_done_direct(union ccb *done_ccb) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct\n")); if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0) return; xpt_done_process(&done_ccb->ccb_h); } union ccb * xpt_alloc_ccb() { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK); return (new_ccb); } union ccb * xpt_alloc_ccb_nowait() { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT); return (new_ccb); } void xpt_free_ccb(union ccb *free_ccb) { free(free_ccb, M_CAMCCB); } /* Private XPT functions */ /* * Get a CAM control block for the caller. Charge the structure to the device * referenced by the path. If we don't have sufficient resources to allocate * more ccbs, we return NULL. */ static union ccb * xpt_get_ccb_nowait(struct cam_periph *periph) { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_NOWAIT); if (new_ccb == NULL) return (NULL); periph->periph_allocated++; cam_ccbq_take_opening(&periph->path->device->ccbq); return (new_ccb); } static union ccb * xpt_get_ccb(struct cam_periph *periph) { union ccb *new_ccb; cam_periph_unlock(periph); new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_WAITOK); cam_periph_lock(periph); periph->periph_allocated++; cam_ccbq_take_opening(&periph->path->device->ccbq); return (new_ccb); } union ccb * cam_periph_getccb(struct cam_periph *periph, u_int32_t priority) { struct ccb_hdr *ccb_h; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n")); cam_periph_assert(periph, MA_OWNED); while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL || ccb_h->pinfo.priority != priority) { if (priority < periph->immediate_priority) { periph->immediate_priority = priority; xpt_run_allocq(periph, 0); } else cam_periph_sleep(periph, &periph->ccb_list, PRIBIO, "cgticb", 0); } SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle); return ((union ccb *)ccb_h); } static void xpt_acquire_bus(struct cam_eb *bus) { xpt_lock_buses(); bus->refcount++; xpt_unlock_buses(); } static void xpt_release_bus(struct cam_eb *bus) { xpt_lock_buses(); KASSERT(bus->refcount >= 1, ("bus->refcount >= 1")); if (--bus->refcount > 0) { xpt_unlock_buses(); return; } TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links); xsoftc.bus_generation++; xpt_unlock_buses(); KASSERT(TAILQ_EMPTY(&bus->et_entries), ("destroying bus, but target list is not empty")); cam_sim_release(bus->sim); mtx_destroy(&bus->eb_mtx); free(bus, M_CAMXPT); } static struct cam_et * xpt_alloc_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *cur_target, *target; mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED); mtx_assert(&bus->eb_mtx, MA_OWNED); target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT, M_NOWAIT|M_ZERO); if (target == NULL) return (NULL); TAILQ_INIT(&target->ed_entries); target->bus = bus; target->target_id = target_id; target->refcount = 1; target->generation = 0; target->luns = NULL; mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF); timevalclear(&target->last_reset); /* * Hold a reference to our parent bus so it * will not go away before we do. */ bus->refcount++; /* Insertion sort into our bus's target list */ cur_target = TAILQ_FIRST(&bus->et_entries); while (cur_target != NULL && cur_target->target_id < target_id) cur_target = TAILQ_NEXT(cur_target, links); if (cur_target != NULL) { TAILQ_INSERT_BEFORE(cur_target, target, links); } else { TAILQ_INSERT_TAIL(&bus->et_entries, target, links); } bus->generation++; return (target); } static void xpt_acquire_target(struct cam_et *target) { struct cam_eb *bus = target->bus; mtx_lock(&bus->eb_mtx); target->refcount++; mtx_unlock(&bus->eb_mtx); } static void xpt_release_target(struct cam_et *target) { struct cam_eb *bus = target->bus; mtx_lock(&bus->eb_mtx); if (--target->refcount > 0) { mtx_unlock(&bus->eb_mtx); return; } TAILQ_REMOVE(&bus->et_entries, target, links); bus->generation++; mtx_unlock(&bus->eb_mtx); KASSERT(TAILQ_EMPTY(&target->ed_entries), ("destroying target, but device list is not empty")); xpt_release_bus(bus); mtx_destroy(&target->luns_mtx); if (target->luns) free(target->luns, M_CAMXPT); free(target, M_CAMXPT); } static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); device->mintags = 1; device->maxtags = 1; return (device); } static void xpt_destroy_device(void *context, int pending) { struct cam_ed *device = context; mtx_lock(&device->device_mtx); mtx_destroy(&device->device_mtx); free(device, M_CAMDEV); } struct cam_ed * xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *cur_device, *device; struct cam_devq *devq; cam_status status; mtx_assert(&bus->eb_mtx, MA_OWNED); /* Make space for us in the device queue on our bus */ devq = bus->sim->devq; mtx_lock(&devq->send_mtx); status = cam_devq_resize(devq, devq->send_queue.array_size + 1); mtx_unlock(&devq->send_mtx); if (status != CAM_REQ_CMP) return (NULL); device = (struct cam_ed *)malloc(sizeof(*device), M_CAMDEV, M_NOWAIT|M_ZERO); if (device == NULL) return (NULL); cam_init_pinfo(&device->devq_entry); device->target = target; device->lun_id = lun_id; device->sim = bus->sim; if (cam_ccbq_init(&device->ccbq, bus->sim->max_dev_openings) != 0) { free(device, M_CAMDEV); return (NULL); } SLIST_INIT(&device->asyncs); SLIST_INIT(&device->periphs); device->generation = 0; device->flags = CAM_DEV_UNCONFIGURED; device->tag_delay_count = 0; device->tag_saved_openings = 0; device->refcount = 1; mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF); callout_init_mtx(&device->callout, &devq->send_mtx, 0); TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device); /* * Hold a reference to our parent bus so it * will not go away before we do. */ target->refcount++; cur_device = TAILQ_FIRST(&target->ed_entries); while (cur_device != NULL && cur_device->lun_id < lun_id) cur_device = TAILQ_NEXT(cur_device, links); if (cur_device != NULL) TAILQ_INSERT_BEFORE(cur_device, device, links); else TAILQ_INSERT_TAIL(&target->ed_entries, device, links); target->generation++; return (device); } void xpt_acquire_device(struct cam_ed *device) { struct cam_eb *bus = device->target->bus; mtx_lock(&bus->eb_mtx); device->refcount++; mtx_unlock(&bus->eb_mtx); } void xpt_release_device(struct cam_ed *device) { struct cam_eb *bus = device->target->bus; struct cam_devq *devq; mtx_lock(&bus->eb_mtx); if (--device->refcount > 0) { mtx_unlock(&bus->eb_mtx); return; } TAILQ_REMOVE(&device->target->ed_entries, device,links); device->target->generation++; mtx_unlock(&bus->eb_mtx); /* Release our slot in the devq */ devq = bus->sim->devq; mtx_lock(&devq->send_mtx); cam_devq_resize(devq, devq->send_queue.array_size - 1); mtx_unlock(&devq->send_mtx); KASSERT(SLIST_EMPTY(&device->periphs), ("destroying device, but periphs list is not empty")); KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX, ("destroying device while still queued for ccbs")); if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) callout_stop(&device->callout); xpt_release_target(device->target); cam_ccbq_fini(&device->ccbq); /* * Free allocated memory. free(9) does nothing if the * supplied pointer is NULL, so it is safe to call without * checking. */ free(device->supported_vpds, M_CAMXPT); free(device->device_id, M_CAMXPT); free(device->physpath, M_CAMXPT); free(device->rcap_buf, M_CAMXPT); free(device->serial_num, M_CAMXPT); taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task); } u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings) { int result; struct cam_ed *dev; dev = path->device; mtx_lock(&dev->sim->devq->send_mtx); result = cam_ccbq_resize(&dev->ccbq, newopenings); mtx_unlock(&dev->sim->devq->send_mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (dev->inq_flags & SID_CmdQue) != 0) dev->tag_saved_openings = newopenings; return (result); } static struct cam_eb * xpt_find_bus(path_id_t path_id) { struct cam_eb *bus; xpt_lock_buses(); for (bus = TAILQ_FIRST(&xsoftc.xpt_busses); bus != NULL; bus = TAILQ_NEXT(bus, links)) { if (bus->path_id == path_id) { bus->refcount++; break; } } xpt_unlock_buses(); return (bus); } static struct cam_et * xpt_find_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *target; mtx_assert(&bus->eb_mtx, MA_OWNED); for (target = TAILQ_FIRST(&bus->et_entries); target != NULL; target = TAILQ_NEXT(target, links)) { if (target->target_id == target_id) { target->refcount++; break; } } return (target); } static struct cam_ed * xpt_find_device(struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; mtx_assert(&target->bus->eb_mtx, MA_OWNED); for (device = TAILQ_FIRST(&target->ed_entries); device != NULL; device = TAILQ_NEXT(device, links)) { if (device->lun_id == lun_id) { device->refcount++; break; } } return (device); } void xpt_start_tags(struct cam_path *path) { struct ccb_relsim crs; struct cam_ed *device; struct cam_sim *sim; int newopenings; device = path->device; sim = path->bus->sim; device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; xpt_freeze_devq(path, /*count*/1); device->inq_flags |= SID_CmdQue; if (device->tag_saved_openings != 0) newopenings = device->tag_saved_openings; else newopenings = min(device->maxtags, sim->max_tagged_dev_openings); xpt_dev_ccbq_resize(path, newopenings); xpt_async(AC_GETDEV_CHANGED, path, NULL); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } void xpt_stop_tags(struct cam_path *path) { struct ccb_relsim crs; struct cam_ed *device; struct cam_sim *sim; device = path->device; sim = path->bus->sim; device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; device->tag_delay_count = 0; xpt_freeze_devq(path, /*count*/1); device->inq_flags &= ~SID_CmdQue; xpt_dev_ccbq_resize(path, sim->max_dev_openings); xpt_async(AC_GETDEV_CHANGED, path, NULL); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } static void xpt_boot_delay(void *arg) { xpt_release_boot(); } static void xpt_config(void *arg) { /* * Now that interrupts are enabled, go find our devices */ if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq")) printf("xpt_config: failed to create taskqueue thread.\n"); /* Setup debugging path */ if (cam_dflags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, NULL, CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN) != CAM_REQ_CMP) { printf("xpt_config: xpt_create_path() failed for debug" " target %d:%d:%d, debugging disabled\n", CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN); cam_dflags = CAM_DEBUG_NONE; } } else cam_dpath = NULL; periphdriver_init(1); xpt_hold_boot(); callout_init(&xsoftc.boot_callout, 1); callout_reset(&xsoftc.boot_callout, hz * xsoftc.boot_delay / 1000, xpt_boot_delay, NULL); /* Fire up rescan thread. */ if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0, "cam", "scanner")) { printf("xpt_config: failed to create rescan thread.\n"); } } void xpt_hold_boot(void) { xpt_lock_buses(); xsoftc.buses_to_config++; xpt_unlock_buses(); } void xpt_release_boot(void) { xpt_lock_buses(); xsoftc.buses_to_config--; if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) { struct xpt_task *task; xsoftc.buses_config_done = 1; xpt_unlock_buses(); /* Call manually because we don't have any busses */ task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT); if (task != NULL) { TASK_INIT(&task->task, 0, xpt_finishconfig_task, task); taskqueue_enqueue(taskqueue_thread, &task->task); } } else xpt_unlock_buses(); } /* * If the given device only has one peripheral attached to it, and if that * peripheral is the passthrough driver, announce it. This insures that the * user sees some sort of announcement for every peripheral in their system. */ static int xptpassannouncefunc(struct cam_ed *device, void *arg) { struct cam_periph *periph; int i; for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL; periph = SLIST_NEXT(periph, periph_links), i++); periph = SLIST_FIRST(&device->periphs); if ((i == 1) && (strncmp(periph->periph_name, "pass", 4) == 0)) xpt_announce_periph(periph, NULL); return(1); } static void xpt_finishconfig_task(void *context, int pending) { periphdriver_init(2); /* * Check for devices with no "standard" peripheral driver * attached. For any devices like that, announce the * passthrough driver so the user will see something. */ if (!bootverbose) xpt_for_all_devices(xptpassannouncefunc, NULL); /* Release our hook so that the boot can continue. */ config_intrhook_disestablish(xsoftc.xpt_config_hook); free(xsoftc.xpt_config_hook, M_CAMXPT); xsoftc.xpt_config_hook = NULL; free(context, M_CAMXPT); } cam_status xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg, struct cam_path *path) { struct ccb_setasync csa; cam_status status; int xptpath = 0; if (path == NULL) { status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) return (status); xpt_path_lock(path); xptpath = 1; } xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL); csa.ccb_h.func_code = XPT_SASYNC_CB; csa.event_enable = event; csa.callback = cbfunc; csa.callback_arg = cbarg; xpt_action((union ccb *)&csa); status = csa.ccb_h.status; if (xptpath) { xpt_path_unlock(path); xpt_free_path(path); } if ((status == CAM_REQ_CMP) && (csa.event_enable & AC_FOUND_DEVICE)) { /* * Get this peripheral up to date with all * the currently existing devices. */ xpt_for_all_devices(xptsetasyncfunc, &csa); } if ((status == CAM_REQ_CMP) && (csa.event_enable & AC_PATH_REGISTERED)) { /* * Get this peripheral up to date with all * the currently existing busses. */ xpt_for_all_busses(xptsetasyncbusfunc, &csa); } return (status); } static void xptaction(struct cam_sim *sim, union ccb *work_ccb) { CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n")); switch (work_ccb->ccb_h.func_code) { /* Common cases first */ case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi; cpi = &work_ccb->cpi; cpi->version_num = 1; /* XXX??? */ cpi->hba_inquiry = 0; cpi->target_sprt = 0; cpi->hba_misc = 0; cpi->hba_eng_cnt = 0; cpi->max_target = 0; cpi->max_lun = 0; cpi->initiator_id = 0; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "", HBA_IDLEN); strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN); cpi->unit_number = sim->unit_number; cpi->bus_id = sim->bus_id; cpi->base_transfer_speed = 0; cpi->protocol = PROTO_UNSPECIFIED; cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; cpi->transport = XPORT_UNSPECIFIED; cpi->transport_version = XPORT_VERSION_UNSPECIFIED; cpi->ccb_h.status = CAM_REQ_CMP; xpt_done(work_ccb); break; } default: work_ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(work_ccb); break; } } /* * The xpt as a "controller" has no interrupt sources, so polling * is a no-op. */ static void xptpoll(struct cam_sim *sim) { } void xpt_lock_buses(void) { mtx_lock(&xsoftc.xpt_topo_lock); } void xpt_unlock_buses(void) { mtx_unlock(&xsoftc.xpt_topo_lock); } struct mtx * xpt_path_mtx(struct cam_path *path) { return (&path->device->device_mtx); } static void xpt_done_process(struct ccb_hdr *ccb_h) { struct cam_sim *sim; struct cam_devq *devq; struct mtx *mtx = NULL; if (ccb_h->flags & CAM_HIGH_POWER) { struct highpowerlist *hphead; struct cam_ed *device; mtx_lock(&xsoftc.xpt_highpower_lock); hphead = &xsoftc.highpowerq; device = STAILQ_FIRST(hphead); /* * Increment the count since this command is done. */ xsoftc.num_highpower++; /* * Any high powered commands queued up? */ if (device != NULL) { STAILQ_REMOVE_HEAD(hphead, highpowerq_entry); mtx_unlock(&xsoftc.xpt_highpower_lock); mtx_lock(&device->sim->devq->send_mtx); xpt_release_devq_device(device, /*count*/1, /*runqueue*/TRUE); mtx_unlock(&device->sim->devq->send_mtx); } else mtx_unlock(&xsoftc.xpt_highpower_lock); } sim = ccb_h->path->bus->sim; if (ccb_h->status & CAM_RELEASE_SIMQ) { xpt_release_simq(sim, /*run_queue*/FALSE); ccb_h->status &= ~CAM_RELEASE_SIMQ; } if ((ccb_h->flags & CAM_DEV_QFRZDIS) && (ccb_h->status & CAM_DEV_QFRZN)) { xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/FALSE); ccb_h->status &= ~CAM_DEV_QFRZN; } devq = sim->devq; if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) { struct cam_ed *dev = ccb_h->path->device; mtx_lock(&devq->send_mtx); devq->send_active--; devq->send_openings++; cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h); if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 && (dev->ccbq.dev_active == 0))) { dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY; xpt_release_devq_device(dev, /*count*/1, /*run_queue*/FALSE); } if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) { dev->flags &= ~CAM_DEV_REL_ON_COMPLETE; xpt_release_devq_device(dev, /*count*/1, /*run_queue*/FALSE); } if (!device_is_queued(dev)) (void)xpt_schedule_devq(devq, dev); mtx_unlock(&devq->send_mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) { mtx = xpt_path_mtx(ccb_h->path); mtx_lock(mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 && (--dev->tag_delay_count == 0)) xpt_start_tags(ccb_h->path); } } if ((ccb_h->flags & CAM_UNLOCKED) == 0) { if (mtx == NULL) { mtx = xpt_path_mtx(ccb_h->path); mtx_lock(mtx); } } else { if (mtx != NULL) { mtx_unlock(mtx); mtx = NULL; } } /* Call the peripheral driver's callback */ ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h); if (mtx != NULL) mtx_unlock(mtx); mtx_lock(&devq->send_mtx); xpt_run_devq(devq); mtx_unlock(&devq->send_mtx); } void xpt_done_td(void *arg) { struct cam_doneq *queue = arg; struct ccb_hdr *ccb_h; STAILQ_HEAD(, ccb_hdr) doneq; STAILQ_INIT(&doneq); mtx_lock(&queue->cam_doneq_mtx); while (1) { while (STAILQ_EMPTY(&queue->cam_doneq)) { queue->cam_doneq_sleep = 1; msleep(&queue->cam_doneq, &queue->cam_doneq_mtx, PRIBIO, "-", 0); queue->cam_doneq_sleep = 0; } STAILQ_CONCAT(&doneq, &queue->cam_doneq); mtx_unlock(&queue->cam_doneq_mtx); THREAD_NO_SLEEPING(); while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) { STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe); xpt_done_process(ccb_h); } THREAD_SLEEPING_OK(); mtx_lock(&queue->cam_doneq_mtx); } } static void camisr_runqueue(void) { struct ccb_hdr *ccb_h; struct cam_doneq *queue; int i; /* Process global queues. */ for (i = 0; i < cam_num_doneqs; i++) { queue = &cam_doneqs[i]; mtx_lock(&queue->cam_doneq_mtx); while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) { STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe); mtx_unlock(&queue->cam_doneq_mtx); xpt_done_process(ccb_h); mtx_lock(&queue->cam_doneq_mtx); } mtx_unlock(&queue->cam_doneq_mtx); } } Index: head/sys/cam/scsi/scsi_xpt.c =================================================================== --- head/sys/cam/scsi/scsi_xpt.c (revision 260540) +++ head/sys/cam/scsi/scsi_xpt.c (revision 260541) @@ -1,3052 +1,3043 @@ /*- * Implementation of the SCSI Transport * * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for xpt_print below */ #include "opt_cam.h" struct scsi_quirk_entry { struct scsi_inquiry_pattern inq_pat; u_int8_t quirks; #define CAM_QUIRK_NOLUNS 0x01 #define CAM_QUIRK_NOVPDS 0x02 #define CAM_QUIRK_HILUNS 0x04 #define CAM_QUIRK_NOHILUNS 0x08 #define CAM_QUIRK_NORPTLUNS 0x10 u_int mintags; u_int maxtags; }; #define SCSI_QUIRK(dev) ((struct scsi_quirk_entry *)((dev)->quirk)) static int cam_srch_hi = 0; TUNABLE_INT("kern.cam.cam_srch_hi", &cam_srch_hi); static int sysctl_cam_search_luns(SYSCTL_HANDLER_ARGS); SYSCTL_PROC(_kern_cam, OID_AUTO, cam_srch_hi, CTLTYPE_INT|CTLFLAG_RW, 0, 0, sysctl_cam_search_luns, "I", "allow search above LUN 7 for SCSI3 and greater devices"); #define CAM_SCSI2_MAXLUN 8 #define CAM_CAN_GET_SIMPLE_LUN(x, i) \ ((((x)->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_PERIPH) || \ (((x)->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_FLAT)) #define CAM_GET_SIMPLE_LUN(lp, i, lval) \ if (((lp)->luns[(i)].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_PERIPH) { \ (lval) = (lp)->luns[(i)].lundata[1]; \ } else { \ (lval) = (lp)->luns[(i)].lundata[0]; \ (lval) &= RPL_LUNDATA_FLAT_LUN_MASK; \ (lval) <<= 8; \ (lval) |= (lp)->luns[(i)].lundata[1]; \ } #define CAM_GET_LUN(lp, i, lval) \ (lval) = scsi_8btou64((lp)->luns[(i)].lundata); \ (lval) = CAM_EXTLUN_BYTE_SWIZZLE(lval); /* * If we're not quirked to search <= the first 8 luns * and we are either quirked to search above lun 8, * or we're > SCSI-2 and we've enabled hilun searching, * or we're > SCSI-2 and the last lun was a success, * we can look for luns above lun 8. */ #define CAN_SRCH_HI_SPARSE(dv) \ (((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_NOHILUNS) == 0) \ && ((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_HILUNS) \ || (SID_ANSI_REV(&dv->inq_data) > SCSI_REV_2 && cam_srch_hi))) #define CAN_SRCH_HI_DENSE(dv) \ (((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_NOHILUNS) == 0) \ && ((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_HILUNS) \ || (SID_ANSI_REV(&dv->inq_data) > SCSI_REV_2))) static periph_init_t probe_periph_init; static struct periph_driver probe_driver = { probe_periph_init, "probe", TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(probe, probe_driver); typedef enum { PROBE_TUR, PROBE_INQUIRY, /* this counts as DV0 for Basic Domain Validation */ PROBE_FULL_INQUIRY, PROBE_REPORT_LUNS, PROBE_MODE_SENSE, PROBE_SUPPORTED_VPD_LIST, PROBE_DEVICE_ID, PROBE_SERIAL_NUM, PROBE_TUR_FOR_NEGOTIATION, PROBE_INQUIRY_BASIC_DV1, PROBE_INQUIRY_BASIC_DV2, PROBE_DV_EXIT, PROBE_DONE, PROBE_INVALID } probe_action; static char *probe_action_text[] = { "PROBE_TUR", "PROBE_INQUIRY", "PROBE_FULL_INQUIRY", "PROBE_REPORT_LUNS", "PROBE_MODE_SENSE", "PROBE_SUPPORTED_VPD_LIST", "PROBE_DEVICE_ID", "PROBE_SERIAL_NUM", "PROBE_TUR_FOR_NEGOTIATION", "PROBE_INQUIRY_BASIC_DV1", "PROBE_INQUIRY_BASIC_DV2", "PROBE_DV_EXIT", "PROBE_DONE", "PROBE_INVALID" }; #define PROBE_SET_ACTION(softc, newaction) \ do { \ char **text; \ text = probe_action_text; \ CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ ("Probe %s to %s\n", text[(softc)->action], \ text[(newaction)])); \ (softc)->action = (newaction); \ } while(0) typedef enum { PROBE_INQUIRY_CKSUM = 0x01, PROBE_SERIAL_CKSUM = 0x02, PROBE_NO_ANNOUNCE = 0x04, PROBE_EXTLUN = 0x08 } probe_flags; typedef struct { TAILQ_HEAD(, ccb_hdr) request_ccbs; probe_action action; union ccb saved_ccb; probe_flags flags; MD5_CTX context; u_int8_t digest[16]; struct cam_periph *periph; } probe_softc; static const char quantum[] = "QUANTUM"; static const char sony[] = "SONY"; static const char west_digital[] = "WDIGTL"; static const char samsung[] = "SAMSUNG"; static const char seagate[] = "SEAGATE"; static const char microp[] = "MICROP"; static struct scsi_quirk_entry scsi_quirk_table[] = { { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP34550*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP32275*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, microp, "4421-07*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "HP", "C372*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, microp, "3391*", "x43h" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Unfortunately, the Quantum Atlas III has the same * problem as the Atlas II drives above. * Reported by: "Johan Granlund" * * For future reference, the drive with the problem was: * QUANTUM QM39100TD-SW N1B0 * * It's possible that Quantum will fix the problem in later * firmware revisions. If that happens, the quirk entry * will need to be made specific to the firmware revisions * with the problem. * */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * 18 Gig Atlas III, same problem as the 9G version. * Reported by: Andre Albsmeier * * * For future reference, the drive with the problem was: * QUANTUM QM318000TD-S N491 */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM318000*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * Broken tagged queuing drive * Reported by: Bret Ford * and: Martin Renters */ { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST410800*", "71*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, /* * The Seagate Medalist Pro drives have very poor write * performance with anything more than 2 tags. * * Reported by: Paul van der Zwan * Drive: * * Reported by: Jeremy Lea * Drive: * * No one has actually reported that the 9G version * (ST39140*) of the Medalist Pro has the same problem, but * we're assuming that it does because the 4G and 6.5G * versions of the drive are broken. */ { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST34520*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST36530*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST39140*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { /* * Experiences command timeouts under load with a * tag count higher than 55. */ { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST3146855LW", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/55 }, { /* * Slow when tagged queueing is enabled. Write performance * steadily drops off with more and more concurrent * transactions. Best sequential write performance with * tagged queueing turned off and write caching turned on. * * PR: kern/10398 * Submitted by: Hideaki Okada * Drive: DCAS-34330 w/ "S65A" firmware. * * The drive with the problem had the "S65A" firmware * revision, and has also been reported (by Stephen J. * Roznowski ) for a drive with the "S61A" * firmware revision. * * Although no one has reported problems with the 2 gig * version of the DCAS drive, the assumption is that it * has the same problems as the 4 gig version. Therefore * this quirk entries disables tagged queueing for all * DCAS drives. */ { T_DIRECT, SIP_MEDIA_FIXED, "IBM", "DCAS*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "iomega", "jaz*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "CONNER", "CFP2107*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* This does not support other than LUN 0 */ { T_DIRECT, SIP_MEDIA_FIXED, "VMware*", "*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/2, /*maxtags*/255 }, { /* * Broken tagged queuing drive. * Submitted by: * NAKAJI Hiroyuki * in PR kern/9535 */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN34324U*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "WDE*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "ENTERPRISE", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Doesn't handle queue full condition correctly, * so we need to limit maxtags to what the device * can handle instead of determining this automatically. */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN321010S*", "*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/32 }, { /* Really only one LUN */ { T_ENCLOSURE, SIP_MEDIA_FIXED, "SUN", "SENA", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* I can't believe we need a quirk for DPT volumes. */ { T_ANY, SIP_MEDIA_FIXED|SIP_MEDIA_REMOVABLE, "DPT", "*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/255 }, { /* * Many Sony CDROM drives don't like multi-LUN probing. */ { T_CDROM, SIP_MEDIA_REMOVABLE, sony, "CD-ROM CDU*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * This drive doesn't like multiple LUN probing. * Submitted by: Parag Patel */ { T_WORM, SIP_MEDIA_REMOVABLE, sony, "CD-R CDU9*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { { T_WORM, SIP_MEDIA_REMOVABLE, "YAMAHA", "CDR100*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * The 8200 doesn't like multi-lun probing, and probably * don't like serial number requests either. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "EXABYTE", "EXB-8200*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * Let's try the same as above, but for a drive that says * it's an IPL-6860 but is actually an EXB 8200. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "EXABYTE", "IPL-6860*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * These Hitachi drives don't like multi-lun probing. * The PR submitter has a DK319H, but says that the Linux * kernel has a similar work-around for the DK312 and DK314, * so all DK31* drives are quirked here. * PR: misc/18793 * Submitted by: Paul Haddad */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "DK31*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/2, /*maxtags*/255 }, { /* * The Hitachi CJ series with J8A8 firmware apparantly has * problems with tagged commands. * PR: 23536 * Reported by: amagai@nue.org */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "DK32CJ*", "J8A8" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * These are the large storage arrays. * Submitted by: William Carrel */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "OPEN*", "*" }, CAM_QUIRK_HILUNS, 2, 1024 }, { /* * This old revision of the TDC3600 is also SCSI-1, and * hangs upon serial number probing. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG", " TDC 3600", "U07:" }, CAM_QUIRK_NOVPDS, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "CALIPER", "CP150", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "KENNEDY", "96X2*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* Submitted by: Matthew Dodd */ { T_PROCESSOR, SIP_MEDIA_FIXED, "Cabletrn", "EA41*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* Submitted by: Matthew Dodd */ { T_PROCESSOR, SIP_MEDIA_FIXED, "CABLETRN", "EA41*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* TeraSolutions special settings for TRC-22 RAID */ { T_DIRECT, SIP_MEDIA_FIXED, "TERASOLU", "TRC-22", "*" }, /*quirks*/0, /*mintags*/55, /*maxtags*/255 }, { /* Veritas Storage Appliance */ { T_DIRECT, SIP_MEDIA_FIXED, "VERITAS", "*", "*" }, CAM_QUIRK_HILUNS, /*mintags*/2, /*maxtags*/1024 }, { /* * Would respond to all LUNs. Device type and removable * flag are jumper-selectable. */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, "MaxOptix", "Tahiti 1", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* EasyRAID E5A aka. areca ARC-6010 */ { T_DIRECT, SIP_MEDIA_FIXED, "easyRAID", "*", "*" }, CAM_QUIRK_NOHILUNS, /*mintags*/2, /*maxtags*/255 }, { { T_ENCLOSURE, SIP_MEDIA_FIXED, "DP", "BACKPLANE", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { { T_DIRECT, SIP_MEDIA_REMOVABLE, "Garmin", "*", "*" }, CAM_QUIRK_NORPTLUNS, /*mintags*/2, /*maxtags*/255 }, { /* Default tagged queuing parameters for all devices */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, /*vendor*/"*", /*product*/"*", /*revision*/"*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/255 }, }; static const int scsi_quirk_table_size = sizeof(scsi_quirk_table) / sizeof(*scsi_quirk_table); static cam_status proberegister(struct cam_periph *periph, void *arg); static void probeschedule(struct cam_periph *probe_periph); static void probestart(struct cam_periph *periph, union ccb *start_ccb); static void proberequestdefaultnegotiation(struct cam_periph *periph); static int proberequestbackoff(struct cam_periph *periph, struct cam_ed *device); static void probedone(struct cam_periph *periph, union ccb *done_ccb); static void probe_purge_old(struct cam_path *path, struct scsi_report_luns_data *new, probe_flags flags); static void probecleanup(struct cam_periph *periph); static void scsi_find_quirk(struct cam_ed *device); static void scsi_scan_bus(struct cam_periph *periph, union ccb *ccb); static void scsi_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *ccb); static void xptscandone(struct cam_periph *periph, union ccb *done_ccb); static struct cam_ed * scsi_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static void scsi_devise_transport(struct cam_path *path); static void scsi_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update); static void scsi_toggle_tags(struct cam_path *path); static void scsi_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static void scsi_action(union ccb *start_ccb); static void scsi_announce_periph(struct cam_periph *periph); static struct xpt_xport scsi_xport = { .alloc_device = scsi_alloc_device, .action = scsi_action, .async = scsi_dev_async, .announce = scsi_announce_periph, }; struct xpt_xport * scsi_get_xport(void) { return (&scsi_xport); } static void probe_periph_init() { } static cam_status proberegister(struct cam_periph *periph, void *arg) { union ccb *request_ccb; /* CCB representing the probe request */ cam_status status; probe_softc *softc; request_ccb = (union ccb *)arg; if (request_ccb == NULL) { printf("proberegister: no probe CCB, " "can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (probe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT); if (softc == NULL) { printf("proberegister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } TAILQ_INIT(&softc->request_ccbs); TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); softc->flags = 0; periph->softc = softc; softc->periph = periph; softc->action = PROBE_INVALID; status = cam_periph_acquire(periph); if (status != CAM_REQ_CMP) { return (status); } CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); scsi_devise_transport(periph->path); /* * Ensure we've waited at least a bus settle * delay before attempting to probe the device. * For HBAs that don't do bus resets, this won't make a difference. */ cam_periph_freeze_after_event(periph, &periph->path->bus->last_reset, scsi_delay); probeschedule(periph); return(CAM_REQ_CMP); } static void probeschedule(struct cam_periph *periph) { struct ccb_pathinq cpi; union ccb *ccb; probe_softc *softc; softc = (probe_softc *)periph->softc; ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); /* * If a device has gone away and another device, or the same one, * is back in the same place, it should have a unit attention * condition pending. It will not report the unit attention in * response to an inquiry, which may leave invalid transfer * negotiations in effect. The TUR will reveal the unit attention * condition. Only send the TUR for lun 0, since some devices * will get confused by commands other than inquiry to non-existent * luns. If you think a device has gone away start your scan from * lun 0. This will insure that any bogus transfer settings are * invalidated. * * If we haven't seen the device before and the controller supports * some kind of transfer negotiation, negotiate with the first * sent command if no bus reset was performed at startup. This * ensures that the device is not confused by transfer negotiation * settings left over by loader or BIOS action. */ if (((ccb->ccb_h.path->device->flags & CAM_DEV_UNCONFIGURED) == 0) && (ccb->ccb_h.target_lun == 0)) { PROBE_SET_ACTION(softc, PROBE_TUR); } else if ((cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) != 0 && (cpi.hba_misc & PIM_NOBUSRESET) != 0) { proberequestdefaultnegotiation(periph); PROBE_SET_ACTION(softc, PROBE_INQUIRY); } else { PROBE_SET_ACTION(softc, PROBE_INQUIRY); } if (ccb->crcn.flags & CAM_EXPECT_INQ_CHANGE) softc->flags |= PROBE_NO_ANNOUNCE; else softc->flags &= ~PROBE_NO_ANNOUNCE; if (cpi.hba_misc & PIM_EXTLUNS) softc->flags |= PROBE_EXTLUN; else softc->flags &= ~PROBE_EXTLUN; xpt_schedule(periph, CAM_PRIORITY_XPT); } static void probestart(struct cam_periph *periph, union ccb *start_ccb) { /* Probe the device that our peripheral driver points to */ struct ccb_scsiio *csio; probe_softc *softc; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probestart\n")); softc = (probe_softc *)periph->softc; csio = &start_ccb->csio; again: switch (softc->action) { case PROBE_TUR: case PROBE_TUR_FOR_NEGOTIATION: case PROBE_DV_EXIT: { scsi_test_unit_ready(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/60000); break; } case PROBE_INQUIRY: case PROBE_FULL_INQUIRY: case PROBE_INQUIRY_BASIC_DV1: case PROBE_INQUIRY_BASIC_DV2: { u_int inquiry_len; struct scsi_inquiry_data *inq_buf; inq_buf = &periph->path->device->inq_data; /* * If the device is currently configured, we calculate an * MD5 checksum of the inquiry data, and if the serial number * length is greater than 0, add the serial number data * into the checksum as well. Once the inquiry and the * serial number check finish, we attempt to figure out * whether we still have the same device. */ if ((periph->path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { MD5Init(&softc->context); MD5Update(&softc->context, (unsigned char *)inq_buf, sizeof(struct scsi_inquiry_data)); softc->flags |= PROBE_INQUIRY_CKSUM; if (periph->path->device->serial_num_len > 0) { MD5Update(&softc->context, periph->path->device->serial_num, periph->path->device->serial_num_len); softc->flags |= PROBE_SERIAL_CKSUM; } MD5Final(softc->digest, &softc->context); } if (softc->action == PROBE_INQUIRY) inquiry_len = SHORT_INQUIRY_LENGTH; else inquiry_len = SID_ADDITIONAL_LENGTH(inq_buf); /* * Some parallel SCSI devices fail to send an * ignore wide residue message when dealing with * odd length inquiry requests. Round up to be * safe. */ inquiry_len = roundup2(inquiry_len, 2); if (softc->action == PROBE_INQUIRY_BASIC_DV1 || softc->action == PROBE_INQUIRY_BASIC_DV2) { inq_buf = malloc(inquiry_len, M_CAMXPT, M_NOWAIT); } if (inq_buf == NULL) { xpt_print(periph->path, "malloc failure- skipping Basic" "Domain Validation\n"); PROBE_SET_ACTION(softc, PROBE_DV_EXIT); scsi_test_unit_ready(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/60000); break; } scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)inq_buf, inquiry_len, /*evpd*/FALSE, /*page_code*/0, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } case PROBE_REPORT_LUNS: { void *rp; rp = malloc(periph->path->target->rpl_size, M_CAMXPT, M_NOWAIT | M_ZERO); if (rp == NULL) { struct scsi_inquiry_data *inq_buf; inq_buf = &periph->path->device->inq_data; xpt_print(periph->path, "Unable to alloc report luns storage\n"); if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); goto again; } scsi_report_luns(csio, 5, probedone, MSG_SIMPLE_Q_TAG, RPL_REPORT_DEFAULT, rp, periph->path->target->rpl_size, SSD_FULL_SIZE, 60000); break; break; } case PROBE_MODE_SENSE: { void *mode_buf; int mode_buf_len; mode_buf_len = sizeof(struct scsi_mode_header_6) + sizeof(struct scsi_mode_blk_desc) + sizeof(struct scsi_control_page); mode_buf = malloc(mode_buf_len, M_CAMXPT, M_NOWAIT); if (mode_buf != NULL) { scsi_mode_sense(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SMS_CONTROL_MODE_PAGE, mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60000); break; } xpt_print(periph->path, "Unable to mode sense control page - " "malloc failure\n"); PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); } /* FALLTHROUGH */ case PROBE_SUPPORTED_VPD_LIST: { struct scsi_vpd_supported_page_list *vpd_list; struct cam_ed *device; vpd_list = NULL; device = periph->path->device; if ((SCSI_QUIRK(device)->quirks & CAM_QUIRK_NOVPDS) == 0) vpd_list = malloc(sizeof(*vpd_list), M_CAMXPT, M_NOWAIT | M_ZERO); if (vpd_list != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)vpd_list, sizeof(*vpd_list), /*evpd*/TRUE, SVPD_SUPPORTED_PAGE_LIST, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } +done: /* * We'll have to do without, let our probedone * routine finish up for us. */ start_ccb->csio.data_ptr = NULL; cam_freeze_devq(periph->path); + cam_periph_doacquire(periph); probedone(periph, start_ccb); return; } case PROBE_DEVICE_ID: { struct scsi_vpd_device_id *devid; devid = NULL; if (scsi_vpd_supported_page(periph, SVPD_DEVICE_ID)) devid = malloc(SVPD_DEVICE_ID_MAX_SIZE, M_CAMXPT, M_NOWAIT | M_ZERO); if (devid != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (uint8_t *)devid, SVPD_DEVICE_ID_MAX_SIZE, /*evpd*/TRUE, SVPD_DEVICE_ID, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } - /* - * We'll have to do without, let our probedone - * routine finish up for us. - */ - start_ccb->csio.data_ptr = NULL; - cam_freeze_devq(periph->path); - probedone(periph, start_ccb); - return; + goto done; } case PROBE_SERIAL_NUM: { struct scsi_vpd_unit_serial_number *serial_buf; struct cam_ed* device; serial_buf = NULL; device = periph->path->device; if (device->serial_num != NULL) { free(device->serial_num, M_CAMXPT); device->serial_num = NULL; device->serial_num_len = 0; } if (scsi_vpd_supported_page(periph, SVPD_UNIT_SERIAL_NUMBER)) serial_buf = (struct scsi_vpd_unit_serial_number *) malloc(sizeof(*serial_buf), M_CAMXPT, M_NOWAIT|M_ZERO); if (serial_buf != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)serial_buf, sizeof(*serial_buf), /*evpd*/TRUE, SVPD_UNIT_SERIAL_NUMBER, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } - /* - * We'll have to do without, let our probedone - * routine finish up for us. - */ - start_ccb->csio.data_ptr = NULL; - cam_freeze_devq(periph->path); - probedone(periph, start_ccb); - return; + goto done; } default: panic("probestart: invalid action state 0x%x\n", softc->action); } start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; + cam_periph_doacquire(periph); xpt_action(start_ccb); } static void proberequestdefaultnegotiation(struct cam_periph *periph) { struct ccb_trans_settings cts; xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { return; } cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); } /* * Backoff Negotiation Code- only pertinent for SPI devices. */ static int proberequestbackoff(struct cam_periph *periph, struct cam_ed *device) { struct ccb_trans_settings cts; struct ccb_trans_settings_spi *spi; memset(&cts, 0, sizeof (cts)); xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { if (bootverbose) { xpt_print(periph->path, "failed to get current device settings\n"); } return (0); } if (cts.transport != XPORT_SPI) { if (bootverbose) { xpt_print(periph->path, "not SPI transport\n"); } return (0); } spi = &cts.xport_specific.spi; /* * We cannot renegotiate sync rate if we don't have one. */ if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) { if (bootverbose) { xpt_print(periph->path, "no sync rate known\n"); } return (0); } /* * We'll assert that we don't have to touch PPR options- the * SIM will see what we do with period and offset and adjust * the PPR options as appropriate. */ /* * A sync rate with unknown or zero offset is nonsensical. * A sync period of zero means Async. */ if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0 || spi->sync_offset == 0 || spi->sync_period == 0) { if (bootverbose) { xpt_print(periph->path, "no sync rate available\n"); } return (0); } if (device->flags & CAM_DEV_DV_HIT_BOTTOM) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("hit async: giving up on DV\n")); return (0); } /* * Jump sync_period up by one, but stop at 5MHz and fall back to Async. * We don't try to remember 'last' settings to see if the SIM actually * gets into the speed we want to set. We check on the SIM telling * us that a requested speed is bad, but otherwise don't try and * check the speed due to the asynchronous and handshake nature * of speed setting. */ spi->valid = CTS_SPI_VALID_SYNC_RATE | CTS_SPI_VALID_SYNC_OFFSET; for (;;) { spi->sync_period++; if (spi->sync_period >= 0xf) { spi->sync_period = 0; spi->sync_offset = 0; CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("setting to async for DV\n")); /* * Once we hit async, we don't want to try * any more settings. */ device->flags |= CAM_DEV_DV_HIT_BOTTOM; } else if (bootverbose) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("DV: period 0x%x\n", spi->sync_period)); printf("setting period to 0x%x\n", spi->sync_period); } cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { break; } CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("DV: failed to set period 0x%x\n", spi->sync_period)); if (spi->sync_period == 0) { return (0); } } return (1); } #define CCB_COMPLETED_OK(ccb) (((ccb).status & CAM_STATUS_MASK) == CAM_REQ_CMP) static void probedone(struct cam_periph *periph, union ccb *done_ccb) { probe_softc *softc; struct cam_path *path; u_int32_t priority; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probedone\n")); softc = (probe_softc *)periph->softc; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; switch (softc->action) { case PROBE_TUR: { if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, SF_NO_PRINT, NULL) == ERESTART) { out: /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); + cam_periph_release_locked(periph); return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } PROBE_SET_ACTION(softc, PROBE_INQUIRY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } case PROBE_INQUIRY: case PROBE_FULL_INQUIRY: { if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) { struct scsi_inquiry_data *inq_buf; u_int8_t periph_qual; path->device->flags |= CAM_DEV_INQUIRY_DATA_VALID; inq_buf = &path->device->inq_data; periph_qual = SID_QUAL(inq_buf); if (periph_qual == SID_QUAL_LU_CONNECTED) { u_int8_t len; /* * We conservatively request only * SHORT_INQUIRY_LEN bytes of inquiry * information during our first try * at sending an INQUIRY. If the device * has more information to give, * perform a second request specifying * the amount of information the device * is willing to give. */ len = inq_buf->additional_length + offsetof(struct scsi_inquiry_data, additional_length) + 1; if (softc->action == PROBE_INQUIRY && len > SHORT_INQUIRY_LENGTH) { PROBE_SET_ACTION(softc, PROBE_FULL_INQUIRY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } scsi_find_quirk(path->device); scsi_devise_transport(path); if (path->device->lun_id == 0 && SID_ANSI_REV(inq_buf) > SCSI_REV_SPC2 && (SCSI_QUIRK(path->device)->quirks & CAM_QUIRK_NORPTLUNS) == 0) { PROBE_SET_ACTION(softc, PROBE_REPORT_LUNS); /* * Start with room for *one* lun. */ periph->path->target->rpl_size = 16; } else if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } else if (path->device->lun_id == 0 && SID_ANSI_REV(inq_buf) > SCSI_REV_SPC2 && (SCSI_QUIRK(path->device)->quirks & CAM_QUIRK_NORPTLUNS) == 0) { if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } PROBE_SET_ACTION(softc, PROBE_REPORT_LUNS); periph->path->target->rpl_size = 16; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } } else if (cam_periph_error(done_ccb, 0, done_ccb->ccb_h.target_lun > 0 ? SF_RETRY_UA|SF_QUIET_IR : SF_RETRY_UA, &softc->saved_ccb) == ERESTART) { goto out; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* * If we get to this point, we got an error status back * from the inquiry and the error status doesn't require * automatically retrying the command. Therefore, the * inquiry failed. If we had inquiry information before * for this device, but this latest inquiry command failed, * the device has probably gone away. If this device isn't * already marked unconfigured, notify the peripheral * drivers that this device is no more. */ if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) /* Send the async notification. */ xpt_async(AC_LOST_DEVICE, path, NULL); PROBE_SET_ACTION(softc, PROBE_INVALID); xpt_release_ccb(done_ccb); break; } case PROBE_REPORT_LUNS: { struct ccb_scsiio *csio; struct scsi_report_luns_data *lp; u_int nlun, maxlun; csio = &done_ccb->csio; lp = (struct scsi_report_luns_data *)csio->data_ptr; nlun = scsi_4btoul(lp->length) / 8; maxlun = (csio->dxfer_len / 8) - 1; if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, done_ccb->ccb_h.target_lun > 0 ? SF_RETRY_UA|SF_QUIET_IR : SF_RETRY_UA, &softc->saved_ccb) == ERESTART) { goto out; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { xpt_release_devq(done_ccb->ccb_h.path, 1, TRUE); } free(lp, M_CAMXPT); lp = NULL; } else if (nlun > maxlun) { /* * Reallocate and retry to cover all luns */ CAM_DEBUG(path, CAM_DEBUG_PROBE, ("Probe: reallocating REPORT_LUNS for %u luns\n", nlun)); free(lp, M_CAMXPT); path->target->rpl_size = (nlun << 3) + 8; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } else if (nlun == 0) { /* * If there don't appear to be any luns, bail. */ free(lp, M_CAMXPT); lp = NULL; } else { lun_id_t lun; int idx; CAM_DEBUG(path, CAM_DEBUG_PROBE, ("Probe: %u lun(s) reported\n", nlun)); CAM_GET_LUN(lp, 0, lun); /* * If the first lun is not lun 0, then either there * is no lun 0 in the list, or the list is unsorted. */ if (lun != 0) { for (idx = 0; idx < nlun; idx++) { CAM_GET_LUN(lp, idx, lun); if (lun == 0) { break; } } if (idx != nlun) { uint8_t tlun[8]; memcpy(tlun, lp->luns[0].lundata, 8); memcpy(lp->luns[0].lundata, lp->luns[idx].lundata, 8); memcpy(lp->luns[idx].lundata, tlun, 8); CAM_DEBUG(path, CAM_DEBUG_PROBE, ("lun 0 in position %u\n", idx)); } else { /* * There is no lun 0 in our list. Destroy * the validity of the inquiry data so we * bail here and now. */ path->device->flags &= ~CAM_DEV_INQUIRY_DATA_VALID; } } /* * If we have an old lun list, We can either * retest luns that appear to have been dropped, * or just nuke them. We'll opt for the latter. * This function will also install the new list * in the target structure. */ probe_purge_old(path, lp, softc->flags); lp = NULL; } if (path->device->flags & CAM_DEV_INQUIRY_DATA_VALID) { struct scsi_inquiry_data *inq_buf; inq_buf = &path->device->inq_data; if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } if (lp) { free(lp, M_CAMXPT); } break; } case PROBE_MODE_SENSE: { struct ccb_scsiio *csio; struct scsi_mode_header_6 *mode_hdr; csio = &done_ccb->csio; mode_hdr = (struct scsi_mode_header_6 *)csio->data_ptr; if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) { struct scsi_control_page *page; u_int8_t *offset; offset = ((u_int8_t *)&mode_hdr[1]) + mode_hdr->blk_desc_len; page = (struct scsi_control_page *)offset; path->device->queue_flags = page->queue_flags; } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT, &softc->saved_ccb) == ERESTART) { goto out; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } xpt_release_ccb(done_ccb); free(mode_hdr, M_CAMXPT); PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); xpt_schedule(periph, priority); goto out; } case PROBE_SUPPORTED_VPD_LIST: { struct ccb_scsiio *csio; struct scsi_vpd_supported_page_list *page_list; csio = &done_ccb->csio; page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; if (path->device->supported_vpds != NULL) { free(path->device->supported_vpds, M_CAMXPT); path->device->supported_vpds = NULL; path->device->supported_vpds_len = 0; } if (page_list == NULL) { /* * Don't process the command as it was never sent */ } else if (CCB_COMPLETED_OK(csio->ccb_h)) { /* Got vpd list */ path->device->supported_vpds_len = page_list->length + SVPD_SUPPORTED_PAGES_HDR_LEN; path->device->supported_vpds = (uint8_t *)page_list; xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_DEVICE_ID); xpt_schedule(periph, priority); goto out; } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT, &softc->saved_ccb) == ERESTART) { goto out; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } if (page_list) free(page_list, M_CAMXPT); /* No VPDs available, skip to device check. */ csio->data_ptr = NULL; goto probe_device_check; } case PROBE_DEVICE_ID: { struct scsi_vpd_device_id *devid; struct ccb_scsiio *csio; uint32_t length = 0; csio = &done_ccb->csio; devid = (struct scsi_vpd_device_id *)csio->data_ptr; /* Clean up from previous instance of this device */ if (path->device->device_id != NULL) { path->device->device_id_len = 0; free(path->device->device_id, M_CAMXPT); path->device->device_id = NULL; } if (devid == NULL) { /* Don't process the command as it was never sent */ } else if (CCB_COMPLETED_OK(csio->ccb_h)) { length = scsi_2btoul(devid->length); if (length != 0) { /* * NB: device_id_len is actual response * size, not buffer size. */ path->device->device_id_len = length + SVPD_DEVICE_ID_HDR_LEN; path->device->device_id = (uint8_t *)devid; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA, &softc->saved_ccb) == ERESTART) { goto out; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* Free the device id space if we don't use it */ if (devid && length == 0) free(devid, M_CAMXPT); xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_SERIAL_NUM); xpt_schedule(periph, priority); goto out; } probe_device_check: case PROBE_SERIAL_NUM: { struct ccb_scsiio *csio; struct scsi_vpd_unit_serial_number *serial_buf; u_int32_t priority; int changed; int have_serialnum; changed = 1; have_serialnum = 0; csio = &done_ccb->csio; priority = done_ccb->ccb_h.pinfo.priority; serial_buf = (struct scsi_vpd_unit_serial_number *)csio->data_ptr; if (serial_buf == NULL) { /* * Don't process the command as it was never sent */ } else if (cam_ccb_status(done_ccb) == CAM_REQ_CMP && (serial_buf->length > 0)) { have_serialnum = 1; path->device->serial_num = (u_int8_t *)malloc((serial_buf->length + 1), M_CAMXPT, M_NOWAIT); if (path->device->serial_num != NULL) { memcpy(path->device->serial_num, serial_buf->serial_num, serial_buf->length); path->device->serial_num_len = serial_buf->length; path->device->serial_num[serial_buf->length] = '\0'; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT, &softc->saved_ccb) == ERESTART) { goto out; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* * Let's see if we have seen this device before. */ if ((softc->flags & PROBE_INQUIRY_CKSUM) != 0) { MD5_CTX context; u_int8_t digest[16]; MD5Init(&context); MD5Update(&context, (unsigned char *)&path->device->inq_data, sizeof(struct scsi_inquiry_data)); if (have_serialnum) MD5Update(&context, serial_buf->serial_num, serial_buf->length); MD5Final(digest, &context); if (bcmp(softc->digest, digest, 16) == 0) changed = 0; /* * XXX Do we need to do a TUR in order to ensure * that the device really hasn't changed??? */ if ((changed != 0) && ((softc->flags & PROBE_NO_ANNOUNCE) == 0)) xpt_async(AC_LOST_DEVICE, path, NULL); } if (serial_buf != NULL) free(serial_buf, M_CAMXPT); if (changed != 0) { /* * Now that we have all the necessary * information to safely perform transfer * negotiations... Controllers don't perform * any negotiation or tagged queuing until * after the first XPT_SET_TRAN_SETTINGS ccb is * received. So, on a new device, just retrieve * the user settings, and set them as the current * settings to set the device up. */ proberequestdefaultnegotiation(periph); xpt_release_ccb(done_ccb); /* * Perform a TUR to allow the controller to * perform any necessary transfer negotiation. */ PROBE_SET_ACTION(softc, PROBE_TUR_FOR_NEGOTIATION); xpt_schedule(periph, priority); goto out; } xpt_release_ccb(done_ccb); break; } case PROBE_TUR_FOR_NEGOTIATION: case PROBE_DV_EXIT: if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { cam_periph_error(done_ccb, 0, SF_NO_PRINT | SF_NO_RECOVERY | SF_NO_RETRY, NULL); } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* * Do Domain Validation for lun 0 on devices that claim * to support Synchronous Transfer modes. */ if (softc->action == PROBE_TUR_FOR_NEGOTIATION && done_ccb->ccb_h.target_lun == 0 && (path->device->inq_data.flags & SID_Sync) != 0 && (path->device->flags & CAM_DEV_IN_DV) == 0) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Begin Domain Validation\n")); path->device->flags |= CAM_DEV_IN_DV; xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_INQUIRY_BASIC_DV1); xpt_schedule(periph, priority); goto out; } if (softc->action == PROBE_DV_EXIT) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Leave Domain Validation\n")); } if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } path->device->flags &= ~(CAM_DEV_IN_DV|CAM_DEV_DV_HIT_BOTTOM); if ((softc->flags & PROBE_NO_ANNOUNCE) == 0) { /* Inform the XPT that a new device has been found */ done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, done_ccb->ccb_h.path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); xpt_release_ccb(done_ccb); break; case PROBE_INQUIRY_BASIC_DV1: case PROBE_INQUIRY_BASIC_DV2: { struct scsi_inquiry_data *nbuf; struct ccb_scsiio *csio; if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { cam_periph_error(done_ccb, 0, SF_NO_PRINT | SF_NO_RECOVERY | SF_NO_RETRY, NULL); } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } csio = &done_ccb->csio; nbuf = (struct scsi_inquiry_data *)csio->data_ptr; if (bcmp(nbuf, &path->device->inq_data, SHORT_INQUIRY_LENGTH)) { xpt_print(path, "inquiry data fails comparison at DV%d step\n", softc->action == PROBE_INQUIRY_BASIC_DV1 ? 1 : 2); if (proberequestbackoff(periph, path->device)) { path->device->flags &= ~CAM_DEV_IN_DV; PROBE_SET_ACTION(softc, PROBE_TUR_FOR_NEGOTIATION); } else { /* give up */ PROBE_SET_ACTION(softc, PROBE_DV_EXIT); } free(nbuf, M_CAMXPT); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } free(nbuf, M_CAMXPT); if (softc->action == PROBE_INQUIRY_BASIC_DV1) { PROBE_SET_ACTION(softc, PROBE_INQUIRY_BASIC_DV2); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } if (softc->action == PROBE_INQUIRY_BASIC_DV2) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Leave Domain Validation Successfully\n")); } if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } path->device->flags &= ~(CAM_DEV_IN_DV|CAM_DEV_DV_HIT_BOTTOM); if ((softc->flags & PROBE_NO_ANNOUNCE) == 0) { /* Inform the XPT that a new device has been found */ done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, done_ccb->ccb_h.path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); xpt_release_ccb(done_ccb); break; } default: panic("probedone: invalid action state 0x%x\n", softc->action); } done_ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); TAILQ_REMOVE(&softc->request_ccbs, &done_ccb->ccb_h, periph_links.tqe); done_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(done_ccb); if (TAILQ_FIRST(&softc->request_ccbs) == NULL) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe completed\n")); /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(path, 0, 0, 0, FALSE); + cam_periph_release_locked(periph); cam_periph_invalidate(periph); cam_periph_release_locked(periph); } else { probeschedule(periph); goto out; } } static void probe_purge_old(struct cam_path *path, struct scsi_report_luns_data *new, probe_flags flags) { struct cam_path *tp; struct scsi_report_luns_data *old; u_int idx1, idx2, nlun_old, nlun_new; lun_id_t this_lun; u_int8_t *ol, *nl; if (path->target == NULL) { return; } mtx_lock(&path->target->luns_mtx); old = path->target->luns; path->target->luns = new; mtx_unlock(&path->target->luns_mtx); if (old == NULL) return; nlun_old = scsi_4btoul(old->length) / 8; nlun_new = scsi_4btoul(new->length) / 8; /* * We are not going to assume sorted lists. Deal. */ for (idx1 = 0; idx1 < nlun_old; idx1++) { ol = old->luns[idx1].lundata; for (idx2 = 0; idx2 < nlun_new; idx2++) { nl = new->luns[idx2].lundata; if (memcmp(nl, ol, 8) == 0) { break; } } if (idx2 < nlun_new) { continue; } /* * An 'old' item not in the 'new' list. * Nuke it. Except that if it is lun 0, * that would be what the probe state * machine is currently working on, * so we won't do that. */ CAM_GET_LUN(old, idx1, this_lun); if (this_lun == 0) { continue; } /* * We also cannot nuke it if it is * not in a lun format we understand * and replace the LUN with a "simple" LUN * if that is all the HBA supports. */ if (!(flags & PROBE_EXTLUN)) { if (!CAM_CAN_GET_SIMPLE_LUN(old, idx1)) continue; CAM_GET_SIMPLE_LUN(old, idx1, this_lun); } if (xpt_create_path(&tp, NULL, xpt_path_path_id(path), xpt_path_target_id(path), this_lun) == CAM_REQ_CMP) { xpt_async(AC_LOST_DEVICE, tp, NULL); xpt_free_path(tp); } } free(old, M_CAMXPT); } static void probecleanup(struct cam_periph *periph) { free(periph->softc, M_CAMXPT); } static void scsi_find_quirk(struct cam_ed *device) { struct scsi_quirk_entry *quirk; caddr_t match; match = cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)scsi_quirk_table, sizeof(scsi_quirk_table) / sizeof(*scsi_quirk_table), sizeof(*scsi_quirk_table), scsi_inquiry_match); if (match == NULL) panic("xpt_find_quirk: device didn't match wildcard entry!!"); quirk = (struct scsi_quirk_entry *)match; device->quirk = quirk; device->mintags = quirk->mintags; device->maxtags = quirk->maxtags; } static int sysctl_cam_search_luns(SYSCTL_HANDLER_ARGS) { int error, val; val = cam_srch_hi; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (val == 0 || val == 1) { cam_srch_hi = val; return (0); } else { return (EINVAL); } } typedef struct { union ccb *request_ccb; struct ccb_pathinq *cpi; int counter; int lunindex[0]; } scsi_scan_bus_info; /* * To start a scan, request_ccb is an XPT_SCAN_BUS ccb. * As the scan progresses, scsi_scan_bus is used as the * callback on completion function. */ static void scsi_scan_bus(struct cam_periph *periph, union ccb *request_ccb) { struct mtx *mtx; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("scsi_scan_bus\n")); switch (request_ccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_SCAN_TGT: { scsi_scan_bus_info *scan_info; union ccb *work_ccb, *reset_ccb; struct cam_path *path; u_int i; u_int low_target, max_target; u_int initiator_id; /* Find out the characteristics of the bus */ work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); return; } xpt_setup_ccb(&work_ccb->ccb_h, request_ccb->ccb_h.path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_PATH_INQ; xpt_action(work_ccb); if (work_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = work_ccb->ccb_h.status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } if ((work_ccb->cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } /* We may need to reset bus first, if we haven't done it yet. */ if ((work_ccb->cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) && !(work_ccb->cpi.hba_misc & PIM_NOBUSRESET) && !timevalisset(&request_ccb->ccb_h.path->bus->last_reset) && (reset_ccb = xpt_alloc_ccb_nowait()) != NULL) { xpt_setup_ccb(&reset_ccb->ccb_h, request_ccb->ccb_h.path, CAM_PRIORITY_NONE); reset_ccb->ccb_h.func_code = XPT_RESET_BUS; xpt_action(reset_ccb); if (reset_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = reset_ccb->ccb_h.status; xpt_free_ccb(reset_ccb); xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } xpt_free_ccb(reset_ccb); } /* Save some state for use while we probe for devices */ scan_info = (scsi_scan_bus_info *) malloc(sizeof(scsi_scan_bus_info) + (work_ccb->cpi.max_target * sizeof (u_int)), M_CAMXPT, M_ZERO|M_NOWAIT); if (scan_info == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("SCAN start for %p\n", scan_info)); scan_info->request_ccb = request_ccb; scan_info->cpi = &work_ccb->cpi; /* Cache on our stack so we can work asynchronously */ max_target = scan_info->cpi->max_target; low_target = 0; initiator_id = scan_info->cpi->initiator_id; /* * We can scan all targets in parallel, or do it sequentially. */ if (request_ccb->ccb_h.func_code == XPT_SCAN_TGT) { max_target = low_target = request_ccb->ccb_h.target_id; scan_info->counter = 0; } else if (scan_info->cpi->hba_misc & PIM_SEQSCAN) { max_target = 0; scan_info->counter = 0; } else { scan_info->counter = scan_info->cpi->max_target + 1; if (scan_info->cpi->initiator_id < scan_info->counter) { scan_info->counter--; } } mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); mtx_unlock(mtx); for (i = low_target; i <= max_target; i++) { cam_status status; if (i == initiator_id) continue; status = xpt_create_path(&path, NULL, request_ccb->ccb_h.path_id, i, 0); if (status != CAM_REQ_CMP) { printf("scsi_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); break; } work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { xpt_free_ccb((union ccb *)scan_info->cpi); free(scan_info, M_CAMXPT); xpt_free_path(path); request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); break; } xpt_setup_ccb(&work_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_SCAN_LUN; work_ccb->ccb_h.cbfcnp = scsi_scan_bus; work_ccb->ccb_h.flags |= CAM_UNLOCKED; work_ccb->ccb_h.ppriv_ptr0 = scan_info; work_ccb->crcn.flags = request_ccb->crcn.flags; xpt_action(work_ccb); } mtx_lock(mtx); break; } case XPT_SCAN_LUN: { cam_status status; struct cam_path *path, *oldpath; scsi_scan_bus_info *scan_info; struct cam_et *target; struct cam_ed *device; int next_target; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; oldpath = request_ccb->ccb_h.path; status = cam_ccb_status(request_ccb); /* Reuse the same CCB to query if a device was really found */ scan_info = (scsi_scan_bus_info *)request_ccb->ccb_h.ppriv_ptr0; xpt_setup_ccb(&request_ccb->ccb_h, request_ccb->ccb_h.path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_GDEV_TYPE; path_id = request_ccb->ccb_h.path_id; target_id = request_ccb->ccb_h.target_id; lun_id = request_ccb->ccb_h.target_lun; xpt_action(request_ccb); target = request_ccb->ccb_h.path->target; next_target = 1; mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); mtx_lock(mtx); mtx_lock(&target->luns_mtx); if (target->luns) { lun_id_t first; u_int nluns = scsi_4btoul(target->luns->length) / 8; /* * Make sure we skip over lun 0 if it's the first member * of the list as we've actually just finished probing * it. */ CAM_GET_LUN(target->luns, 0, first); if (first == 0 && scan_info->lunindex[target_id] == 0) { scan_info->lunindex[target_id]++; } /* * Skip any LUNs that the HBA can't deal with. */ while (scan_info->lunindex[target_id] < nluns) { if (scan_info->cpi->hba_misc & PIM_EXTLUNS) { CAM_GET_LUN(target->luns, scan_info->lunindex[target_id], lun_id); break; } if (CAM_CAN_GET_SIMPLE_LUN(target->luns, scan_info->lunindex[target_id])) { CAM_GET_SIMPLE_LUN(target->luns, scan_info->lunindex[target_id], lun_id); break; } scan_info->lunindex[target_id]++; } if (scan_info->lunindex[target_id] < nluns) { mtx_unlock(&target->luns_mtx); next_target = 0; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("next lun to try at index %u is %jx\n", scan_info->lunindex[target_id], (uintmax_t)lun_id)); scan_info->lunindex[target_id]++; } else { mtx_unlock(&target->luns_mtx); /* * We're done with scanning all luns. * * Nuke the bogus device for lun 0 if lun 0 * wasn't on the list. */ if (first != 0) { TAILQ_FOREACH(device, &target->ed_entries, links) { if (device->lun_id == 0) { break; } } if (device) { xpt_release_device(device); } } } } else { mtx_unlock(&target->luns_mtx); if (request_ccb->ccb_h.status != CAM_REQ_CMP) { int phl; /* * If we already probed lun 0 successfully, or * we have additional configured luns on this * target that might have "gone away", go onto * the next lun. */ /* * We may touch devices that we don't * hold references too, so ensure they * don't disappear out from under us. * The target above is referenced by the * path in the request ccb. */ phl = 0; device = TAILQ_FIRST(&target->ed_entries); if (device != NULL) { phl = CAN_SRCH_HI_SPARSE(device); if (device->lun_id == 0) device = TAILQ_NEXT(device, links); } if ((lun_id != 0) || (device != NULL)) { if (lun_id < (CAM_SCSI2_MAXLUN-1) || phl) { lun_id++; next_target = 0; } } if (lun_id == request_ccb->ccb_h.target_lun || lun_id > scan_info->cpi->max_lun) next_target = 1; } else { device = request_ccb->ccb_h.path->device; if ((SCSI_QUIRK(device)->quirks & CAM_QUIRK_NOLUNS) == 0) { /* Try the next lun */ if (lun_id < (CAM_SCSI2_MAXLUN-1) || CAN_SRCH_HI_DENSE(device)) { lun_id++; next_target = 0; } } if (lun_id == request_ccb->ccb_h.target_lun || lun_id > scan_info->cpi->max_lun) next_target = 1; } } /* * Check to see if we scan any further luns. */ if (next_target) { int done; /* * Free the current request path- we're done with it. */ xpt_free_path(oldpath); hop_again: done = 0; if (scan_info->request_ccb->ccb_h.func_code == XPT_SCAN_TGT) { done = 1; } else if (scan_info->cpi->hba_misc & PIM_SEQSCAN) { scan_info->counter++; if (scan_info->counter == scan_info->cpi->initiator_id) { scan_info->counter++; } if (scan_info->counter >= scan_info->cpi->max_target+1) { done = 1; } } else { scan_info->counter--; if (scan_info->counter == 0) { done = 1; } } if (done) { mtx_unlock(mtx); xpt_free_ccb(request_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("SCAN done for %p\n", scan_info)); free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); break; } if ((scan_info->cpi->hba_misc & PIM_SEQSCAN) == 0) { mtx_unlock(mtx); xpt_free_ccb(request_ccb); break; } status = xpt_create_path(&path, NULL, scan_info->request_ccb->ccb_h.path_id, scan_info->counter, 0); if (status != CAM_REQ_CMP) { mtx_unlock(mtx); printf("scsi_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); xpt_free_ccb(request_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = status; xpt_done(request_ccb); break; } xpt_setup_ccb(&request_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.cbfcnp = scsi_scan_bus; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->ccb_h.ppriv_ptr0 = scan_info; request_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; } else { status = xpt_create_path(&path, NULL, path_id, target_id, lun_id); /* * Free the old request path- we're done with it. We * do this *after* creating the new path so that * we don't remove a target that has our lun list * in the case that lun 0 is not present. */ xpt_free_path(oldpath); if (status != CAM_REQ_CMP) { printf("scsi_scan_bus: xpt_create_path failed " "with status %#x, halting LUN scan\n", status); goto hop_again; } xpt_setup_ccb(&request_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.cbfcnp = scsi_scan_bus; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->ccb_h.ppriv_ptr0 = scan_info; request_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; } mtx_unlock(mtx); xpt_action(request_ccb); break; } default: break; } } static void scsi_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *request_ccb) { struct ccb_pathinq cpi; cam_status status; struct cam_path *new_path; struct cam_periph *old_periph; int lock; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("scsi_scan_lun\n")); xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); if (cpi.ccb_h.status != CAM_REQ_CMP) { if (request_ccb != NULL) { request_ccb->ccb_h.status = cpi.ccb_h.status; xpt_done(request_ccb); } return; } if ((cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ if (request_ccb != NULL) { request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); } return; } if (request_ccb == NULL) { request_ccb = xpt_alloc_ccb_nowait(); if (request_ccb == NULL) { xpt_print(path, "scsi_scan_lun: can't allocate CCB, " "can't continue\n"); return; } status = xpt_create_path(&new_path, NULL, path->bus->path_id, path->target->target_id, path->device->lun_id); if (status != CAM_REQ_CMP) { xpt_print(path, "scsi_scan_lun: can't create path, " "can't continue\n"); xpt_free_ccb(request_ccb); return; } xpt_setup_ccb(&request_ccb->ccb_h, new_path, CAM_PRIORITY_XPT); request_ccb->ccb_h.cbfcnp = xptscandone; request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->crcn.flags = flags; } lock = (xpt_path_owned(path) == 0); if (lock) xpt_path_lock(path); if ((old_periph = cam_periph_find(path, "probe")) != NULL) { if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { probe_softc *softc; softc = (probe_softc *)old_periph->softc; TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); } else { request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; xpt_done(request_ccb); } } else { status = cam_periph_alloc(proberegister, NULL, probecleanup, probestart, "probe", CAM_PERIPH_BIO, request_ccb->ccb_h.path, NULL, 0, request_ccb); if (status != CAM_REQ_CMP) { xpt_print(path, "scsi_scan_lun: cam_alloc_periph " "returned an error, can't continue probe\n"); request_ccb->ccb_h.status = status; xpt_done(request_ccb); } } if (lock) xpt_path_unlock(path); } static void xptscandone(struct cam_periph *periph, union ccb *done_ccb) { xpt_free_path(done_ccb->ccb_h.path); xpt_free_ccb(done_ccb); } static struct cam_ed * scsi_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct scsi_quirk_entry *quirk; struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); /* * Take the default quirk entry until we have inquiry * data and can determine a better quirk to use. */ quirk = &scsi_quirk_table[scsi_quirk_table_size - 1]; device->quirk = (void *)quirk; device->mintags = quirk->mintags; device->maxtags = quirk->maxtags; bzero(&device->inq_data, sizeof(device->inq_data)); device->inq_flags = 0; device->queue_flags = 0; device->serial_num = NULL; device->serial_num_len = 0; device->device_id = NULL; device->device_id_len = 0; device->supported_vpds = NULL; device->supported_vpds_len = 0; return (device); } static void scsi_devise_transport(struct cam_path *path) { struct ccb_pathinq cpi; struct ccb_trans_settings cts; struct scsi_inquiry_data *inq_buf; /* Get transport information from the SIM */ xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); inq_buf = NULL; if ((path->device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0) inq_buf = &path->device->inq_data; path->device->protocol = PROTO_SCSI; path->device->protocol_version = inq_buf != NULL ? SID_ANSI_REV(inq_buf) : cpi.protocol_version; path->device->transport = cpi.transport; path->device->transport_version = cpi.transport_version; /* * Any device not using SPI3 features should * be considered SPI2 or lower. */ if (inq_buf != NULL) { if (path->device->transport == XPORT_SPI && (inq_buf->spi3data & SID_SPI_MASK) == 0 && path->device->transport_version > 2) path->device->transport_version = 2; } else { struct cam_ed* otherdev; for (otherdev = TAILQ_FIRST(&path->target->ed_entries); otherdev != NULL; otherdev = TAILQ_NEXT(otherdev, links)) { if (otherdev != path->device) break; } if (otherdev != NULL) { /* * Initially assume the same versioning as * prior luns for this target. */ path->device->protocol_version = otherdev->protocol_version; path->device->transport_version = otherdev->transport_version; } else { /* Until we know better, opt for safty */ path->device->protocol_version = 2; if (path->device->transport == XPORT_SPI) path->device->transport_version = 2; else path->device->transport_version = 0; } } /* * XXX * For a device compliant with SPC-2 we should be able * to determine the transport version supported by * scrutinizing the version descriptors in the * inquiry buffer. */ /* Tell the controller what we think */ xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.transport = path->device->transport; cts.transport_version = path->device->transport_version; cts.protocol = path->device->protocol; cts.protocol_version = path->device->protocol_version; cts.proto_specific.valid = 0; cts.xport_specific.valid = 0; xpt_action((union ccb *)&cts); } static void scsi_dev_advinfo(union ccb *start_ccb) { struct cam_ed *device; struct ccb_dev_advinfo *cdai; off_t amt; start_ccb->ccb_h.status = CAM_REQ_INVALID; device = start_ccb->ccb_h.path->device; cdai = &start_ccb->cdai; switch(cdai->buftype) { case CDAI_TYPE_SCSI_DEVID: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->device_id_len; if (device->device_id_len == 0) break; amt = device->device_id_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->device_id, amt); break; case CDAI_TYPE_SERIAL_NUM: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->serial_num_len; if (device->serial_num_len == 0) break; amt = device->serial_num_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->serial_num, amt); break; case CDAI_TYPE_PHYS_PATH: if (cdai->flags & CDAI_FLAG_STORE) { if (device->physpath != NULL) { free(device->physpath, M_CAMXPT); device->physpath = NULL; } device->physpath_len = cdai->bufsiz; /* Clear existing buffer if zero length */ if (cdai->bufsiz == 0) break; device->physpath = malloc(cdai->bufsiz, M_CAMXPT, M_NOWAIT); if (device->physpath == NULL) { start_ccb->ccb_h.status = CAM_REQ_ABORTED; return; } memcpy(device->physpath, cdai->buf, cdai->bufsiz); } else { cdai->provsiz = device->physpath_len; if (device->physpath_len == 0) break; amt = device->physpath_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->physpath, amt); } break; case CDAI_TYPE_RCAPLONG: if (cdai->flags & CDAI_FLAG_STORE) { if (device->rcap_buf != NULL) { free(device->rcap_buf, M_CAMXPT); device->rcap_buf = NULL; } device->rcap_len = cdai->bufsiz; /* Clear existing buffer if zero length */ if (cdai->bufsiz == 0) break; device->rcap_buf = malloc(cdai->bufsiz, M_CAMXPT, M_NOWAIT); if (device->rcap_buf == NULL) { start_ccb->ccb_h.status = CAM_REQ_ABORTED; return; } memcpy(device->rcap_buf, cdai->buf, cdai->bufsiz); } else { cdai->provsiz = device->rcap_len; if (device->rcap_len == 0) break; amt = device->rcap_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->rcap_buf, amt); } break; default: return; } start_ccb->ccb_h.status = CAM_REQ_CMP; if (cdai->flags & CDAI_FLAG_STORE) { xpt_async(AC_ADVINFO_CHANGED, start_ccb->ccb_h.path, (void *)(uintptr_t)cdai->buftype); } } static void scsi_action(union ccb *start_ccb) { switch (start_ccb->ccb_h.func_code) { case XPT_SET_TRAN_SETTINGS: { scsi_set_transfer_settings(&start_ccb->cts, start_ccb->ccb_h.path, /*async_update*/FALSE); break; } case XPT_SCAN_BUS: case XPT_SCAN_TGT: scsi_scan_bus(start_ccb->ccb_h.path->periph, start_ccb); break; case XPT_SCAN_LUN: scsi_scan_lun(start_ccb->ccb_h.path->periph, start_ccb->ccb_h.path, start_ccb->crcn.flags, start_ccb); break; case XPT_DEV_ADVINFO: { scsi_dev_advinfo(start_ccb); break; } default: xpt_action_default(start_ccb); break; } } static void scsi_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update) { struct ccb_pathinq cpi; struct ccb_trans_settings cur_cts; struct ccb_trans_settings_scsi *scsi; struct ccb_trans_settings_scsi *cur_scsi; struct scsi_inquiry_data *inq_data; struct cam_ed *device; if (path == NULL || (device = path->device) == NULL) { cts->ccb_h.status = CAM_PATH_INVALID; xpt_done((union ccb *)cts); return; } if (cts->protocol == PROTO_UNKNOWN || cts->protocol == PROTO_UNSPECIFIED) { cts->protocol = device->protocol; cts->protocol_version = device->protocol_version; } if (cts->protocol_version == PROTO_VERSION_UNKNOWN || cts->protocol_version == PROTO_VERSION_UNSPECIFIED) cts->protocol_version = device->protocol_version; if (cts->protocol != device->protocol) { xpt_print(path, "Uninitialized Protocol %x:%x?\n", cts->protocol, device->protocol); cts->protocol = device->protocol; } if (cts->protocol_version > device->protocol_version) { if (bootverbose) { xpt_print(path, "Down reving Protocol " "Version from %d to %d?\n", cts->protocol_version, device->protocol_version); } cts->protocol_version = device->protocol_version; } if (cts->transport == XPORT_UNKNOWN || cts->transport == XPORT_UNSPECIFIED) { cts->transport = device->transport; cts->transport_version = device->transport_version; } if (cts->transport_version == XPORT_VERSION_UNKNOWN || cts->transport_version == XPORT_VERSION_UNSPECIFIED) cts->transport_version = device->transport_version; if (cts->transport != device->transport) { xpt_print(path, "Uninitialized Transport %x:%x?\n", cts->transport, device->transport); cts->transport = device->transport; } if (cts->transport_version > device->transport_version) { if (bootverbose) { xpt_print(path, "Down reving Transport " "Version from %d to %d?\n", cts->transport_version, device->transport_version); } cts->transport_version = device->transport_version; } /* * Nothing more of interest to do unless * this is a device connected via the * SCSI protocol. */ if (cts->protocol != PROTO_SCSI) { if (async_update == FALSE) xpt_action_default((union ccb *)cts); return; } inq_data = &device->inq_data; scsi = &cts->proto_specific.scsi; xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); /* SCSI specific sanity checking */ if ((cpi.hba_inquiry & PI_TAG_ABLE) == 0 || (INQ_DATA_TQ_ENABLED(inq_data)) == 0 || (device->queue_flags & SCP_QUEUE_DQUE) != 0 || (device->mintags == 0)) { /* * Can't tag on hardware that doesn't support tags, * doesn't have it enabled, or has broken tag support. */ scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; } if (async_update == FALSE) { /* * Perform sanity checking against what the * controller and device can do. */ xpt_setup_ccb(&cur_cts.ccb_h, path, CAM_PRIORITY_NONE); cur_cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cur_cts.type = cts->type; xpt_action((union ccb *)&cur_cts); if (cam_ccb_status((union ccb *)&cur_cts) != CAM_REQ_CMP) { return; } cur_scsi = &cur_cts.proto_specific.scsi; if ((scsi->valid & CTS_SCSI_VALID_TQ) == 0) { scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; scsi->flags |= cur_scsi->flags & CTS_SCSI_FLAGS_TAG_ENB; } if ((cur_scsi->valid & CTS_SCSI_VALID_TQ) == 0) scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; } /* SPI specific sanity checking */ if (cts->transport == XPORT_SPI && async_update == FALSE) { u_int spi3caps; struct ccb_trans_settings_spi *spi; struct ccb_trans_settings_spi *cur_spi; spi = &cts->xport_specific.spi; cur_spi = &cur_cts.xport_specific.spi; /* Fill in any gaps in what the user gave us */ if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) spi->sync_period = cur_spi->sync_period; if ((cur_spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) spi->sync_period = 0; if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) spi->sync_offset = cur_spi->sync_offset; if ((cur_spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) spi->sync_offset = 0; if ((spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) spi->ppr_options = cur_spi->ppr_options; if ((cur_spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) spi->ppr_options = 0; if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) == 0) spi->bus_width = cur_spi->bus_width; if ((cur_spi->valid & CTS_SPI_VALID_BUS_WIDTH) == 0) spi->bus_width = 0; if ((spi->valid & CTS_SPI_VALID_DISC) == 0) { spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; spi->flags |= cur_spi->flags & CTS_SPI_FLAGS_DISC_ENB; } if ((cur_spi->valid & CTS_SPI_VALID_DISC) == 0) spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0 && (inq_data->flags & SID_Sync) == 0 && cts->type == CTS_TYPE_CURRENT_SETTINGS) || ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0)) { /* Force async */ spi->sync_period = 0; spi->sync_offset = 0; } switch (spi->bus_width) { case MSG_EXT_WDTR_BUS_32_BIT: if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 || (inq_data->flags & SID_WBus32) != 0 || cts->type == CTS_TYPE_USER_SETTINGS) && (cpi.hba_inquiry & PI_WIDE_32) != 0) break; /* Fall Through to 16-bit */ case MSG_EXT_WDTR_BUS_16_BIT: if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 || (inq_data->flags & SID_WBus16) != 0 || cts->type == CTS_TYPE_USER_SETTINGS) && (cpi.hba_inquiry & PI_WIDE_16) != 0) { spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT; break; } /* Fall Through to 8-bit */ default: /* New bus width?? */ case MSG_EXT_WDTR_BUS_8_BIT: /* All targets can do this */ spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; break; } spi3caps = cpi.xport_specific.spi.ppr_options; if ((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0 && cts->type == CTS_TYPE_CURRENT_SETTINGS) spi3caps &= inq_data->spi3data; if ((spi3caps & SID_SPI_CLOCK_DT) == 0) spi->ppr_options &= ~MSG_EXT_PPR_DT_REQ; if ((spi3caps & SID_SPI_IUS) == 0) spi->ppr_options &= ~MSG_EXT_PPR_IU_REQ; if ((spi3caps & SID_SPI_QAS) == 0) spi->ppr_options &= ~MSG_EXT_PPR_QAS_REQ; /* No SPI Transfer settings are allowed unless we are wide */ if (spi->bus_width == 0) spi->ppr_options = 0; if ((spi->valid & CTS_SPI_VALID_DISC) && ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) == 0)) { /* * Can't tag queue without disconnection. */ scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; scsi->valid |= CTS_SCSI_VALID_TQ; } /* * If we are currently performing tagged transactions to * this device and want to change its negotiation parameters, * go non-tagged for a bit to give the controller a chance to * negotiate unhampered by tag messages. */ if (cts->type == CTS_TYPE_CURRENT_SETTINGS && (device->inq_flags & SID_CmdQue) != 0 && (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0 && (spi->flags & (CTS_SPI_VALID_SYNC_RATE| CTS_SPI_VALID_SYNC_OFFSET| CTS_SPI_VALID_BUS_WIDTH)) != 0) scsi_toggle_tags(path); } if (cts->type == CTS_TYPE_CURRENT_SETTINGS && (scsi->valid & CTS_SCSI_VALID_TQ) != 0) { int device_tagenb; /* * If we are transitioning from tags to no-tags or * vice-versa, we need to carefully freeze and restart * the queue so that we don't overlap tagged and non-tagged * commands. We also temporarily stop tags if there is * a change in transfer negotiation settings to allow * "tag-less" negotiation. */ if ((device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0) device_tagenb = TRUE; else device_tagenb = FALSE; if (((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0 && device_tagenb == FALSE) || ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) == 0 && device_tagenb == TRUE)) { if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) { /* * Delay change to use tags until after a * few commands have gone to this device so * the controller has time to perform transfer * negotiations without tagged messages getting * in the way. */ device->tag_delay_count = CAM_TAG_DELAY_COUNT; device->flags |= CAM_DEV_TAG_AFTER_COUNT; } else { xpt_stop_tags(path); } } } if (async_update == FALSE) xpt_action_default((union ccb *)cts); } static void scsi_toggle_tags(struct cam_path *path) { struct cam_ed *dev; /* * Give controllers a chance to renegotiate * before starting tag operations. We * "toggle" tagged queuing off then on * which causes the tag enable command delay * counter to come into effect. */ dev = path->device; if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || ((dev->inq_flags & SID_CmdQue) != 0 && (dev->inq_flags & (SID_Sync|SID_WBus16|SID_WBus32)) != 0)) { struct ccb_trans_settings cts; xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.protocol = PROTO_SCSI; cts.protocol_version = PROTO_VERSION_UNSPECIFIED; cts.transport = XPORT_UNSPECIFIED; cts.transport_version = XPORT_VERSION_UNSPECIFIED; cts.proto_specific.scsi.flags = 0; cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ; scsi_set_transfer_settings(&cts, path, /*async_update*/TRUE); cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB; scsi_set_transfer_settings(&cts, path, /*async_update*/TRUE); } } /* * Handle any per-device event notifications that require action by the XPT. */ static void scsi_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { cam_status status; struct cam_path newpath; /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; /* * We need our own path with wildcards expanded to * handle certain types of events. */ if ((async_code == AC_SENT_BDR) || (async_code == AC_BUS_RESET) || (async_code == AC_INQ_CHANGED)) status = xpt_compile_path(&newpath, NULL, bus->path_id, target->target_id, device->lun_id); else status = CAM_REQ_CMP_ERR; if (status == CAM_REQ_CMP) { /* * Allow transfer negotiation to occur in a * tag free environment and after settle delay. */ if (async_code == AC_SENT_BDR || async_code == AC_BUS_RESET) { cam_freeze_devq(&newpath); cam_release_devq(&newpath, RELSIM_RELEASE_AFTER_TIMEOUT, /*reduction*/0, /*timeout*/scsi_delay, /*getcount_only*/0); scsi_toggle_tags(&newpath); } if (async_code == AC_INQ_CHANGED) { /* * We've sent a start unit command, or * something similar to a device that * may have caused its inquiry data to * change. So we re-scan the device to * refresh the inquiry data for it. */ scsi_scan_lun(newpath.periph, &newpath, CAM_EXPECT_INQ_CHANGE, NULL); } xpt_release_path(&newpath); } else if (async_code == AC_LOST_DEVICE && (device->flags & CAM_DEV_UNCONFIGURED) == 0) { device->flags |= CAM_DEV_UNCONFIGURED; xpt_release_device(device); } else if (async_code == AC_TRANSFER_NEG) { struct ccb_trans_settings *settings; struct cam_path path; settings = (struct ccb_trans_settings *)async_arg; xpt_compile_path(&path, NULL, bus->path_id, target->target_id, device->lun_id); scsi_set_transfer_settings(settings, &path, /*async_update*/TRUE); xpt_release_path(&path); } } static void scsi_announce_periph(struct cam_periph *periph) { struct ccb_pathinq cpi; struct ccb_trans_settings cts; struct cam_path *path = periph->path; u_int speed; u_int freq; u_int mb; cam_periph_assert(periph, MA_OWNED); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NORMAL); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb*)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) return; /* Ask the SIM for its base transfer speed */ xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); /* Report connection speed */ speed = cpi.base_transfer_speed; freq = 0; if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi = &cts.xport_specific.spi; if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0 && spi->sync_offset != 0) { freq = scsi_calc_syncsrate(spi->sync_period); speed = freq; } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) speed *= (0x01 << spi->bus_width); } if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc = &cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_SPEED) speed = fc->bitrate; } if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_SAS) { struct ccb_trans_settings_sas *sas = &cts.xport_specific.sas; if (sas->valid & CTS_SAS_VALID_SPEED) speed = sas->bitrate; } mb = speed / 1000; if (mb > 0) printf("%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else printf("%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, speed); /* Report additional information about SPI connections */ if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi; spi = &cts.xport_specific.spi; if (freq != 0) { printf(" (%d.%03dMHz%s, offset %d", freq / 1000, freq % 1000, (spi->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 ? " DT" : "", spi->sync_offset); } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0 && spi->bus_width > 0) { if (freq != 0) { printf(", "); } else { printf(" ("); } printf("%dbit)", 8 * (0x01 << spi->bus_width)); } else if (freq != 0) { printf(")"); } } if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc; fc = &cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_WWNN) printf(" WWNN 0x%llx", (long long) fc->wwnn); if (fc->valid & CTS_FC_VALID_WWPN) printf(" WWPN 0x%llx", (long long) fc->wwpn); if (fc->valid & CTS_FC_VALID_PORT) printf(" PortID 0x%x", fc->port); } printf("\n"); }