Index: head/contrib/gcc/ChangeLog.gcc43 =================================================================== --- head/contrib/gcc/ChangeLog.gcc43 (revision 255106) +++ head/contrib/gcc/ChangeLog.gcc43 (revision 255107) @@ -1,387 +1,393 @@ +2007-06-05 Joerg Wunsch (r23479) + + PR preprocessor/23479 + * doc/extend.texi: Document the 0b-prefixed binary integer + constant extension. + 2007-05-01 Dwarakanath Rajagopal (r124341) * doc/invoke.texi: Fix typo, 'AMD Family 10h core' instead of 'AMD Family 10 core'. 2007-05-01 Dwarakanath Rajagopal (r124339) * config/i386/i386.c (override_options): Accept k8-sse3, opteron-sse3 and athlon64-sse3 as improved versions of k8, opteron and athlon64 with SSE3 instruction set support. * doc/invoke.texi: Likewise. 2007-05-01 Dwarakanath Rajagopal (r124330) * config/i386/i386.c (override_options): Tuning 32-byte loop alignment for amdfam10 architecture. Increasing the max loop alignment to 24 bytes. 2007-04-12 Richard Guenther (r123736) PR tree-optimization/24689 PR tree-optimization/31307 * fold-const.c (operand_equal_p): Compare INTEGER_CST array indices by value. * gimplify.c (canonicalize_addr_expr): To be consistent with gimplify_compound_lval only set operands two and three of ARRAY_REFs if they are not gimple_min_invariant. This makes it never at this place. * tree-ssa-ccp.c (maybe_fold_offset_to_array_ref): Likewise. 2007-04-07 H.J. Lu (r123639) * config/i386/i386.c (ix86_handle_option): Handle SSSE3. 2007-03-28 Dwarakanath Rajagopal (r123313) * config.gcc: Accept barcelona as a variant of amdfam10. * config/i386/i386.c (override_options): Likewise. * doc/invoke.texi: Likewise. 2007-02-09 Dwarakanath Rajagopal (r121763) * config/i386/driver-i386.c: Turn on -mtune=native for AMDFAM10. (bit_SSE4a): New. 2007-02-08 Harsha Jagasia (r121726) * config/i386/xmmintrin.h: Make inclusion of emmintrin.h conditional to __SSE2__. (Entries below should have been added to first ChangeLog entry for amdfam10 dated 2007-02-05) * config/i386/emmintrin.h: Generate #error if __SSE2__ is not defined. * config/i386/pmmintrin.h: Generate #error if __SSE3__ is not defined. * config/i386/tmmintrin.h: Generate #error if __SSSE3__ is not defined. 2007-02-07 Jakub Jelinek (r121687) * config/i386/i386.c (override_options): Set PTA_SSSE3 for core2. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (athlon_fldxf_k8, athlon_fld_k8, athlon_fstxf_k8, athlon_fst_k8, athlon_fist, athlon_fmov, athlon_fadd_load, athlon_fadd_load_k8, athlon_fadd, athlon_fmul, athlon_fmul_load, athlon_fmul_load_k8, athlon_fsgn, athlon_fdiv_load, athlon_fdiv_load_k8, athlon_fdiv_k8, athlon_fpspc_load, athlon_fpspc, athlon_fcmov_load, athlon_fcmov_load_k8, athlon_fcmov_k8, athlon_fcomi_load_k8, athlon_fcomi, athlon_fcom_load_k8, athlon_fcom): Added amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/i386.md (x86_sahf_1, cmpfp_i_mixed, cmpfp_i_sse, cmpfp_i_i387, cmpfp_iu_mixed, cmpfp_iu_sse, cmpfp_iu_387, swapsi, swaphi_1, swapqi_1, swapdi_rex64, fix_truncsfdi_sse, fix_truncdfdi_sse, fix_truncsfsi_sse, fix_truncdfsi_sse, x86_fldcw_1, floatsisf2_mixed, floatsisf2_sse, floatdisf2_mixed, floatdisf2_sse, floatsidf2_mixed, floatsidf2_sse, floatdidf2_mixed, floatdidf2_sse, muldi3_1_rex64, mulsi3_1, mulsi3_1_zext, mulhi3_1, mulqi3_1, umulqihi3_1, mulqihi3_insn, umulditi3_insn, umulsidi3_insn, mulditi3_insn, mulsidi3_insn, umuldi3_highpart_rex64, umulsi3_highpart_insn, umulsi3_highpart_zext, smuldi3_highpart_rex64, smulsi3_highpart_insn, smulsi3_highpart_zext, x86_64_shld, x86_shld_1, x86_64_shrd, sqrtsf2_mixed, sqrtsf2_sse, sqrtsf2_i387, sqrtdf2_mixed, sqrtdf2_sse, sqrtdf2_i387, sqrtextendsfdf2_i387, sqrtxf2, sqrtextendsfxf2_i387, sqrtextenddfxf2_i387): Added amdfam10_decode. * config/i386/athlon.md (athlon_idirect_amdfam10, athlon_ivector_amdfam10, athlon_idirect_load_amdfam10, athlon_ivector_load_amdfam10, athlon_idirect_both_amdfam10, athlon_ivector_both_amdfam10, athlon_idirect_store_amdfam10, athlon_ivector_store_amdfam10): New define_insn_reservation. (athlon_idirect_loadmov, athlon_idirect_movstore): Added amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (athlon_call_amdfam10, athlon_pop_amdfam10, athlon_lea_amdfam10): New define_insn_reservation. (athlon_branch, athlon_push, athlon_leave_k8, athlon_imul_k8, athlon_imul_k8_DI, athlon_imul_mem_k8, athlon_imul_mem_k8_DI, athlon_idiv, athlon_idiv_mem, athlon_str): Added amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (athlon_sseld_amdfam10, athlon_mmxld_amdfam10, athlon_ssest_amdfam10, athlon_mmxssest_short_amdfam10): New define_insn_reservation. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (athlon_sseins_amdfam10): New define_insn_reservation. * config/i386/i386.md (sseins): Added sseins to define_attr type and define_attr unit. * config/i386/sse.md: Set type attribute to sseins for insertq and insertqi. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (sselog_load_amdfam10, sselog_amdfam10, ssecmpvector_load_amdfam10, ssecmpvector_amdfam10, ssecomi_load_amdfam10, ssecomi_amdfam10, sseaddvector_load_amdfam10, sseaddvector_amdfam10): New define_insn_reservation. (ssecmp_load_k8, ssecmp, sseadd_load_k8, seadd): Added amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (cvtss2sd_load_amdfam10, cvtss2sd_amdfam10, cvtps2pd_load_amdfam10, cvtps2pd_amdfam10, cvtsi2sd_load_amdfam10, cvtsi2ss_load_amdfam10, cvtsi2sd_amdfam10, cvtsi2ss_amdfam10, cvtsd2ss_load_amdfam10, cvtsd2ss_amdfam10, cvtpd2ps_load_amdfam10, cvtpd2ps_amdfam10, cvtsX2si_load_amdfam10, cvtsX2si_amdfam10): New define_insn_reservation. * config/i386/sse.md (cvtsi2ss, cvtsi2ssq, cvtss2si, cvtss2siq, cvttss2si, cvttss2siq, cvtsi2sd, cvtsi2sdq, cvtsd2si, cvtsd2siq, cvttsd2si, cvttsd2siq, cvtpd2dq, cvttpd2dq, cvtsd2ss, cvtss2sd, cvtpd2ps, cvtps2pd): Added amdfam10_decode attribute. 2007-02-05 Harsha Jagasia (r121625) * config/i386/athlon.md (athlon_ssedivvector_amdfam10, athlon_ssedivvector_load_amdfam10, athlon_ssemulvector_amdfam10, athlon_ssemulvector_load_amdfam10): New define_insn_reservation. (athlon_ssediv, athlon_ssediv_load_k8, athlon_ssemul, athlon_ssemul_load_k8): Added amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/i386.h (TARGET_SSE_UNALIGNED_MOVE_OPTIMAL): New macro. (x86_sse_unaligned_move_optimal): New variable. * config/i386/i386.c (x86_sse_unaligned_move_optimal): Enable for m_AMDFAM10. (ix86_expand_vector_move_misalign): Add code to generate movupd/movups for unaligned vector SSE double/single precision loads for AMDFAM10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/i386.h (TARGET_AMDFAM10): New macro. (TARGET_CPU_CPP_BUILTINS): Add code for amdfam10. Define TARGET_CPU_DEFAULT_amdfam10. (TARGET_CPU_DEFAULT_NAMES): Add amdfam10. (processor_type): Add PROCESSOR_AMDFAM10. * config/i386/i386.md: Add amdfam10 as a new cpu attribute to match processor_type in config/i386/i386.h. Enable imul peepholes for TARGET_AMDFAM10. * config.gcc: Add support for --with-cpu option for amdfam10. * config/i386/i386.c (amdfam10_cost): New variable. (m_AMDFAM10): New macro. (m_ATHLON_K8_AMDFAM10): New macro. (x86_use_leave, x86_push_memory, x86_movx, x86_unroll_strlen, x86_cmove, x86_3dnow_a, x86_deep_branch, x86_use_simode_fiop, x86_promote_QImode, x86_integer_DFmode_moves, x86_partial_reg_dependency, x86_memory_mismatch_stall, x86_accumulate_outgoing_args, x86_arch_always_fancy_math_387, x86_sse_partial_reg_dependency, x86_sse_typeless_stores, x86_use_ffreep, x86_use_incdec, x86_four_jump_limit, x86_schedule, x86_use_bt, x86_cmpxchg16b, x86_pad_returns): Enable/disable for amdfam10. (override_options): Add amdfam10_cost to processor_target_table. Set up PROCESSOR_AMDFAM10 for amdfam10 entry in processor_alias_table. (ix86_issue_rate): Add PROCESSOR_AMDFAM10. (ix86_adjust_cost): Add code for amdfam10. 2007-02-05 Harsha Jagasia (r121625) * config/i386/i386.opt: Add new Advanced Bit Manipulation (-mabm) instruction set feature flag. Add new (-mpopcnt) flag for popcnt instruction. Add new SSE4A (-msse4a) instruction set feature flag. * config/i386/i386.h: Add builtin definition for SSE4A. * config/i386/i386.md: Add support for ABM instructions (popcnt and lzcnt). * config/i386/sse.md: Add support for SSE4A instructions (movntss, movntsd, extrq, insertq). * config/i386/i386.c: Add support for ABM and SSE4A builtins. Add -march=amdfam10 flag. * config/i386/ammintrin.h: Add support for SSE4A intrinsics. * doc/invoke.texi: Add documentation on flags for sse4a, abm, popcnt and amdfam10. * doc/extend.texi: Add documentation for SSE4A builtins. 2007-01-24 Jakub Jelinek (r121140) * config/i386/i386.h (x86_cmpxchg16b): Remove const. (TARGET_CMPXCHG16B): Define to x86_cmpxchg16b. * config/i386/i386.c (x86_cmpxchg16b): Remove const. (override_options): Add PTA_CX16 flag. Set x86_cmpxchg16b for CPUs that have PTA_CX16 set. 2007-01-17 Eric Christopher (r120846) * config.gcc: Support core2 processor. 2006-12-02 H.J. Lu (r119454 - partial) PR target/30040 * config/i386/driver-i386.c (bit_SSSE3): New. 2006-11-27 Uros Bizjak (r119260) * config/i386/i386.c (x86_ext_80387_constants): Add m_K8, m_CORE2 and m_GENERIC64. 2006-11-18 Vladimir Makarov (r118973) * doc/invoke.texi (core2): Add item. * config/i386/i386.h (TARGET_CORE2, TARGET_CPU_DEFAULT_core2): New macros. (TARGET_CPU_CPP_BUILTINS): Add code for core2. (TARGET_CPU_DEFAULT_generic): Change value. (TARGET_CPU_DEFAULT_NAMES): Add core2. (processor_type): Add new constant PROCESSOR_CORE2. * config/i386/i386.md (cpu): Add core2. * config/i386/i386.c (core2_cost): New initialized variable. (m_CORE2): New macro. (x86_use_leave, x86_push_memory, x86_movx, x86_unroll_strlen, x86_deep_branch, x86_partial_reg_stall, x86_use_simode_fiop, x86_use_cltd, x86_promote_QImode, x86_sub_esp_4, x86_sub_esp_8, x86_add_esp_4, x86_add_esp_8, x86_integer_DFmode_moves, x86_partial_reg_dependency, x86_memory_mismatch_stall, x86_accumulate_outgoing_args, x86_prologue_using_move, x86_epilogue_using_move, x86_arch_always_fancy_math_387, x86_sse_partial_reg_dependency, x86_rep_movl_optimal, x86_use_incdec, x86_four_jump_limit, x86_schedule, x86_pad_returns): Add m_CORE2. (override_options): Add entries for Core2. (ix86_issue_rate): Add case for Core2. 2006-10-27 Vladimir Makarov (r118090) * config/i386/i386.h (TARGET_GEODE): (TARGET_CPU_CPP_BUILTINS): Add code for geode. (TARGET_CPU_DEFAULT_geode): New macro. (TARGET_CPU_DEFAULT_k6, TARGET_CPU_DEFAULT_k6_2, TARGET_CPU_DEFAULT_k6_3, TARGET_CPU_DEFAULT_athlon, TARGET_CPU_DEFAULT_athlon_sse, TARGET_CPU_DEFAULT_k8, TARGET_CPU_DEFAULT_pentium_m, TARGET_CPU_DEFAULT_prescott, TARGET_CPU_DEFAULT_nocona, TARGET_CPU_DEFAULT_generic): Increase the macro values. (TARGET_CPU_DEFAULT_NAMES): Add geode. (processor_type): Add PROCESSOR_GEODE. * config/i386/i386.md: Include geode.md. (cpu): Add geode. * config/i386/i386.c (geode_cost): New initialized global variable. (m_GEODE, m_K6_GEODE): New macros. (x86_use_leave, x86_push_memory, x86_deep_branch, x86_use_sahf, x86_use_himode_fiop, x86_promote_QImode, x86_add_esp_4, x86_add_esp_8, x86_rep_movl_optimal, x86_ext_80387_constants, x86_schedule): Use m_K6_GEODE instead of m_K6. (x86_movx, x86_cmove): Set up m_GEODE. (x86_integer_DFmode_moves): Clear m_GEODE. (processor_target_table): Add entry for geode. (processor_alias_table): Ditto. * config/i386/geode.md: New file. * doc/invoke.texi: Add entry about geode processor. 2006-10-24 Richard Guenther (r118001) PR middle-end/28796 * builtins.c (fold_builtin_classify): Use HONOR_INFINITIES and HONOR_NANS instead of MODE_HAS_INFINITIES and MODE_HAS_NANS for deciding optimizations in consistency with fold-const.c (fold_builtin_unordered_cmp): Likewise. 2006-10-22 H.J. Lu (r117958) * config.gcc (i[34567]86-*-*): Add tmmintrin.h to extra_headers. (x86_64-*-*): Likewise. * config/i386/i386.c (pta_flags): Add PTA_SSSE3. (override_options): Check SSSE3. (ix86_builtins): Add IX86_BUILTIN_PHADDW, IX86_BUILTIN_PHADDD, IX86_BUILTIN_PHADDSW, IX86_BUILTIN_PHSUBW, IX86_BUILTIN_PHSUBD, IX86_BUILTIN_PHSUBSW, IX86_BUILTIN_PMADDUBSW, IX86_BUILTIN_PMULHRSW, IX86_BUILTIN_PSHUFB, IX86_BUILTIN_PSIGNB, IX86_BUILTIN_PSIGNW, IX86_BUILTIN_PSIGND, IX86_BUILTIN_PALIGNR, IX86_BUILTIN_PABSB, IX86_BUILTIN_PABSW, IX86_BUILTIN_PABSD, IX86_BUILTIN_PHADDW128, IX86_BUILTIN_PHADDD128, IX86_BUILTIN_PHADDSW128, IX86_BUILTIN_PHSUBW128, IX86_BUILTIN_PHSUBD128, IX86_BUILTIN_PHSUBSW128, IX86_BUILTIN_PMADDUBSW128, IX86_BUILTIN_PMULHRSW128, IX86_BUILTIN_PSHUFB128, IX86_BUILTIN_PSIGNB128, IX86_BUILTIN_PSIGNW128, IX86_BUILTIN_PSIGND128, IX86_BUILTIN_PALIGNR128, IX86_BUILTIN_PABSB128, IX86_BUILTIN_PABSW128 and IX86_BUILTIN_PABSD128. (bdesc_2arg): Add SSSE3. (bdesc_1arg): Likewise. (ix86_init_mmx_sse_builtins): Support SSSE3. (ix86_expand_builtin): Likewise. * config/i386/i386.h (TARGET_CPU_CPP_BUILTINS): Likewise. * config/i386/i386.md (UNSPEC_PSHUFB): New. (UNSPEC_PSIGN): Likewise. (UNSPEC_PALIGNR): Likewise. Include mmx.md before sse.md. * config/i386/i386.opt: Add -mssse3. * config/i386/sse.md (ssse3_phaddwv8hi3): New pattern for SSSE3. (ssse3_phaddwv4hi3): Likewise. (ssse3_phadddv4si3): Likewise. (ssse3_phadddv2si3): Likewise. (ssse3_phaddswv8hi3): Likewise. (ssse3_phaddswv4hi3): Likewise. (ssse3_phsubwv8hi3): Likewise. (ssse3_phsubwv4hi3): Likewise. (ssse3_phsubdv4si3): Likewise. (ssse3_phsubdv2si3): Likewise. (ssse3_phsubswv8hi3): Likewise. (ssse3_phsubswv4hi3): Likewise. (ssse3_pmaddubswv8hi3): Likewise. (ssse3_pmaddubswv4hi3): Likewise. (ssse3_pmulhrswv8hi3): Likewise. (ssse3_pmulhrswv4hi3): Likewise. (ssse3_pshufbv16qi3): Likewise. (ssse3_pshufbv8qi3): Likewise. (ssse3_psign3): Likewise. (ssse3_psign3): Likewise. (ssse3_palignrti): Likewise. (ssse3_palignrdi): Likewise. (abs2): Likewise. (abs2): Likewise. * config/i386/tmmintrin.h: New file. * doc/extend.texi: Document SSSE3 built-in functions. * doc/invoke.texi: Document -mssse3/-mno-ssse3 switches. 2006-10-22 H.J. Lu (r117959) * config/i386/tmmintrin.h: Remove the duplicated content. 2006-10-21 Richard Guenther (r117932) PR tree-optimization/3511 * tree-ssa-pre.c (phi_translate): Fold CALL_EXPRs that got new invariant arguments during PHI translation. 2006-10-21 Richard Guenther (r117929) * builtins.c (fold_builtin_classify): Fix typo. Index: head/contrib/gcc/doc/extend.texi =================================================================== --- head/contrib/gcc/doc/extend.texi (revision 255106) +++ head/contrib/gcc/doc/extend.texi (revision 255107) @@ -1,11137 +1,11160 @@ @c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1996, 1998, 1999, 2000, @c 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. @c This is part of the GCC manual. @c For copying conditions, see the file gcc.texi. @node C Extensions @chapter Extensions to the C Language Family @cindex extensions, C language @cindex C language extensions @opindex pedantic GNU C provides several language features not found in ISO standard C@. (The @option{-pedantic} option directs GCC to print a warning message if any of these features is used.) To test for the availability of these features in conditional compilation, check for a predefined macro @code{__GNUC__}, which is always defined under GCC@. These extensions are available in C. Most of them are also available in C++. @xref{C++ Extensions,,Extensions to the C++ Language}, for extensions that apply @emph{only} to C++. Some features that are in ISO C99 but not C89 or C++ are also, as extensions, accepted by GCC in C89 mode and in C++. @menu * Statement Exprs:: Putting statements and declarations inside expressions. * Local Labels:: Labels local to a block. * Labels as Values:: Getting pointers to labels, and computed gotos. * Nested Functions:: As in Algol and Pascal, lexical scoping of functions. * Constructing Calls:: Dispatching a call to another function. * Typeof:: @code{typeof}: referring to the type of an expression. * Conditionals:: Omitting the middle operand of a @samp{?:} expression. * Long Long:: Double-word integers---@code{long long int}. * Complex:: Data types for complex numbers. * Decimal Float:: Decimal Floating Types. * Hex Floats:: Hexadecimal floating-point constants. * Zero Length:: Zero-length arrays. * Variable Length:: Arrays whose length is computed at run time. * Empty Structures:: Structures with no members. * Variadic Macros:: Macros with a variable number of arguments. * Escaped Newlines:: Slightly looser rules for escaped newlines. * Subscripting:: Any array can be subscripted, even if not an lvalue. * Pointer Arith:: Arithmetic on @code{void}-pointers and function pointers. * Initializers:: Non-constant initializers. * Compound Literals:: Compound literals give structures, unions or arrays as values. * Designated Inits:: Labeling elements of initializers. * Cast to Union:: Casting to union type from any member of the union. * Case Ranges:: `case 1 ... 9' and such. * Mixed Declarations:: Mixing declarations and code. * Function Attributes:: Declaring that functions have no side effects, or that they can never return. * Attribute Syntax:: Formal syntax for attributes. * Function Prototypes:: Prototype declarations and old-style definitions. * C++ Comments:: C++ comments are recognized. * Dollar Signs:: Dollar sign is allowed in identifiers. * Character Escapes:: @samp{\e} stands for the character @key{ESC}. * Variable Attributes:: Specifying attributes of variables. * Type Attributes:: Specifying attributes of types. * Alignment:: Inquiring about the alignment of a type or variable. * Inline:: Defining inline functions (as fast as macros). * Extended Asm:: Assembler instructions with C expressions as operands. (With them you can define ``built-in'' functions.) * Constraints:: Constraints for asm operands * Asm Labels:: Specifying the assembler name to use for a C symbol. * Explicit Reg Vars:: Defining variables residing in specified registers. * Alternate Keywords:: @code{__const__}, @code{__asm__}, etc., for header files. * Incomplete Enums:: @code{enum foo;}, with details to follow. * Function Names:: Printable strings which are the name of the current function. * Return Address:: Getting the return or frame address of a function. * Vector Extensions:: Using vector instructions through built-in functions. * Offsetof:: Special syntax for implementing @code{offsetof}. * Atomic Builtins:: Built-in functions for atomic memory access. * Object Size Checking:: Built-in functions for limited buffer overflow checking. * Other Builtins:: Other built-in functions. * Target Builtins:: Built-in functions specific to particular targets. * Target Format Checks:: Format checks specific to particular targets. * Pragmas:: Pragmas accepted by GCC. * Unnamed Fields:: Unnamed struct/union fields within structs/unions. * Thread-Local:: Per-thread variables. +* Binary constants:: Binary constants using the @samp{0b} prefix. @end menu @node Statement Exprs @section Statements and Declarations in Expressions @cindex statements inside expressions @cindex declarations inside expressions @cindex expressions containing statements @cindex macros, statements in expressions @c the above section title wrapped and causes an underfull hbox.. i @c changed it from "within" to "in". --mew 4feb93 A compound statement enclosed in parentheses may appear as an expression in GNU C@. This allows you to use loops, switches, and local variables within an expression. Recall that a compound statement is a sequence of statements surrounded by braces; in this construct, parentheses go around the braces. For example: @smallexample (@{ int y = foo (); int z; if (y > 0) z = y; else z = - y; z; @}) @end smallexample @noindent is a valid (though slightly more complex than necessary) expression for the absolute value of @code{foo ()}. The last thing in the compound statement should be an expression followed by a semicolon; the value of this subexpression serves as the value of the entire construct. (If you use some other kind of statement last within the braces, the construct has type @code{void}, and thus effectively no value.) This feature is especially useful in making macro definitions ``safe'' (so that they evaluate each operand exactly once). For example, the ``maximum'' function is commonly defined as a macro in standard C as follows: @smallexample #define max(a,b) ((a) > (b) ? (a) : (b)) @end smallexample @noindent @cindex side effects, macro argument But this definition computes either @var{a} or @var{b} twice, with bad results if the operand has side effects. In GNU C, if you know the type of the operands (here taken as @code{int}), you can define the macro safely as follows: @smallexample #define maxint(a,b) \ (@{int _a = (a), _b = (b); _a > _b ? _a : _b; @}) @end smallexample Embedded statements are not allowed in constant expressions, such as the value of an enumeration constant, the width of a bit-field, or the initial value of a static variable. If you don't know the type of the operand, you can still do this, but you must use @code{typeof} (@pxref{Typeof}). In G++, the result value of a statement expression undergoes array and function pointer decay, and is returned by value to the enclosing expression. For instance, if @code{A} is a class, then @smallexample A a; (@{a;@}).Foo () @end smallexample @noindent will construct a temporary @code{A} object to hold the result of the statement expression, and that will be used to invoke @code{Foo}. Therefore the @code{this} pointer observed by @code{Foo} will not be the address of @code{a}. Any temporaries created within a statement within a statement expression will be destroyed at the statement's end. This makes statement expressions inside macros slightly different from function calls. In the latter case temporaries introduced during argument evaluation will be destroyed at the end of the statement that includes the function call. In the statement expression case they will be destroyed during the statement expression. For instance, @smallexample #define macro(a) (@{__typeof__(a) b = (a); b + 3; @}) template T function(T a) @{ T b = a; return b + 3; @} void foo () @{ macro (X ()); function (X ()); @} @end smallexample @noindent will have different places where temporaries are destroyed. For the @code{macro} case, the temporary @code{X} will be destroyed just after the initialization of @code{b}. In the @code{function} case that temporary will be destroyed when the function returns. These considerations mean that it is probably a bad idea to use statement-expressions of this form in header files that are designed to work with C++. (Note that some versions of the GNU C Library contained header files using statement-expression that lead to precisely this bug.) Jumping into a statement expression with @code{goto} or using a @code{switch} statement outside the statement expression with a @code{case} or @code{default} label inside the statement expression is not permitted. Jumping into a statement expression with a computed @code{goto} (@pxref{Labels as Values}) yields undefined behavior. Jumping out of a statement expression is permitted, but if the statement expression is part of a larger expression then it is unspecified which other subexpressions of that expression have been evaluated except where the language definition requires certain subexpressions to be evaluated before or after the statement expression. In any case, as with a function call the evaluation of a statement expression is not interleaved with the evaluation of other parts of the containing expression. For example, @smallexample foo (), ((@{ bar1 (); goto a; 0; @}) + bar2 ()), baz(); @end smallexample @noindent will call @code{foo} and @code{bar1} and will not call @code{baz} but may or may not call @code{bar2}. If @code{bar2} is called, it will be called after @code{foo} and before @code{bar1} @node Local Labels @section Locally Declared Labels @cindex local labels @cindex macros, local labels GCC allows you to declare @dfn{local labels} in any nested block scope. A local label is just like an ordinary label, but you can only reference it (with a @code{goto} statement, or by taking its address) within the block in which it was declared. A local label declaration looks like this: @smallexample __label__ @var{label}; @end smallexample @noindent or @smallexample __label__ @var{label1}, @var{label2}, /* @r{@dots{}} */; @end smallexample Local label declarations must come at the beginning of the block, before any ordinary declarations or statements. The label declaration defines the label @emph{name}, but does not define the label itself. You must do this in the usual way, with @code{@var{label}:}, within the statements of the statement expression. The local label feature is useful for complex macros. If a macro contains nested loops, a @code{goto} can be useful for breaking out of them. However, an ordinary label whose scope is the whole function cannot be used: if the macro can be expanded several times in one function, the label will be multiply defined in that function. A local label avoids this problem. For example: @smallexample #define SEARCH(value, array, target) \ do @{ \ __label__ found; \ typeof (target) _SEARCH_target = (target); \ typeof (*(array)) *_SEARCH_array = (array); \ int i, j; \ int value; \ for (i = 0; i < max; i++) \ for (j = 0; j < max; j++) \ if (_SEARCH_array[i][j] == _SEARCH_target) \ @{ (value) = i; goto found; @} \ (value) = -1; \ found:; \ @} while (0) @end smallexample This could also be written using a statement-expression: @smallexample #define SEARCH(array, target) \ (@{ \ __label__ found; \ typeof (target) _SEARCH_target = (target); \ typeof (*(array)) *_SEARCH_array = (array); \ int i, j; \ int value; \ for (i = 0; i < max; i++) \ for (j = 0; j < max; j++) \ if (_SEARCH_array[i][j] == _SEARCH_target) \ @{ value = i; goto found; @} \ value = -1; \ found: \ value; \ @}) @end smallexample Local label declarations also make the labels they declare visible to nested functions, if there are any. @xref{Nested Functions}, for details. @node Labels as Values @section Labels as Values @cindex labels as values @cindex computed gotos @cindex goto with computed label @cindex address of a label You can get the address of a label defined in the current function (or a containing function) with the unary operator @samp{&&}. The value has type @code{void *}. This value is a constant and can be used wherever a constant of that type is valid. For example: @smallexample void *ptr; /* @r{@dots{}} */ ptr = &&foo; @end smallexample To use these values, you need to be able to jump to one. This is done with the computed goto statement@footnote{The analogous feature in Fortran is called an assigned goto, but that name seems inappropriate in C, where one can do more than simply store label addresses in label variables.}, @code{goto *@var{exp};}. For example, @smallexample goto *ptr; @end smallexample @noindent Any expression of type @code{void *} is allowed. One way of using these constants is in initializing a static array that will serve as a jump table: @smallexample static void *array[] = @{ &&foo, &&bar, &&hack @}; @end smallexample Then you can select a label with indexing, like this: @smallexample goto *array[i]; @end smallexample @noindent Note that this does not check whether the subscript is in bounds---array indexing in C never does that. Such an array of label values serves a purpose much like that of the @code{switch} statement. The @code{switch} statement is cleaner, so use that rather than an array unless the problem does not fit a @code{switch} statement very well. Another use of label values is in an interpreter for threaded code. The labels within the interpreter function can be stored in the threaded code for super-fast dispatching. You may not use this mechanism to jump to code in a different function. If you do that, totally unpredictable things will happen. The best way to avoid this is to store the label address only in automatic variables and never pass it as an argument. An alternate way to write the above example is @smallexample static const int array[] = @{ &&foo - &&foo, &&bar - &&foo, &&hack - &&foo @}; goto *(&&foo + array[i]); @end smallexample @noindent This is more friendly to code living in shared libraries, as it reduces the number of dynamic relocations that are needed, and by consequence, allows the data to be read-only. @node Nested Functions @section Nested Functions @cindex nested functions @cindex downward funargs @cindex thunks A @dfn{nested function} is a function defined inside another function. (Nested functions are not supported for GNU C++.) The nested function's name is local to the block where it is defined. For example, here we define a nested function named @code{square}, and call it twice: @smallexample @group foo (double a, double b) @{ double square (double z) @{ return z * z; @} return square (a) + square (b); @} @end group @end smallexample The nested function can access all the variables of the containing function that are visible at the point of its definition. This is called @dfn{lexical scoping}. For example, here we show a nested function which uses an inherited variable named @code{offset}: @smallexample @group bar (int *array, int offset, int size) @{ int access (int *array, int index) @{ return array[index + offset]; @} int i; /* @r{@dots{}} */ for (i = 0; i < size; i++) /* @r{@dots{}} */ access (array, i) /* @r{@dots{}} */ @} @end group @end smallexample Nested function definitions are permitted within functions in the places where variable definitions are allowed; that is, in any block, mixed with the other declarations and statements in the block. It is possible to call the nested function from outside the scope of its name by storing its address or passing the address to another function: @smallexample hack (int *array, int size) @{ void store (int index, int value) @{ array[index] = value; @} intermediate (store, size); @} @end smallexample Here, the function @code{intermediate} receives the address of @code{store} as an argument. If @code{intermediate} calls @code{store}, the arguments given to @code{store} are used to store into @code{array}. But this technique works only so long as the containing function (@code{hack}, in this example) does not exit. If you try to call the nested function through its address after the containing function has exited, all hell will break loose. If you try to call it after a containing scope level has exited, and if it refers to some of the variables that are no longer in scope, you may be lucky, but it's not wise to take the risk. If, however, the nested function does not refer to anything that has gone out of scope, you should be safe. GCC implements taking the address of a nested function using a technique called @dfn{trampolines}. A paper describing them is available as @noindent @uref{http://people.debian.org/~aaronl/Usenix88-lexic.pdf}. A nested function can jump to a label inherited from a containing function, provided the label was explicitly declared in the containing function (@pxref{Local Labels}). Such a jump returns instantly to the containing function, exiting the nested function which did the @code{goto} and any intermediate functions as well. Here is an example: @smallexample @group bar (int *array, int offset, int size) @{ __label__ failure; int access (int *array, int index) @{ if (index > size) goto failure; return array[index + offset]; @} int i; /* @r{@dots{}} */ for (i = 0; i < size; i++) /* @r{@dots{}} */ access (array, i) /* @r{@dots{}} */ /* @r{@dots{}} */ return 0; /* @r{Control comes here from @code{access} if it detects an error.} */ failure: return -1; @} @end group @end smallexample A nested function always has no linkage. Declaring one with @code{extern} or @code{static} is erroneous. If you need to declare the nested function before its definition, use @code{auto} (which is otherwise meaningless for function declarations). @smallexample bar (int *array, int offset, int size) @{ __label__ failure; auto int access (int *, int); /* @r{@dots{}} */ int access (int *array, int index) @{ if (index > size) goto failure; return array[index + offset]; @} /* @r{@dots{}} */ @} @end smallexample @node Constructing Calls @section Constructing Function Calls @cindex constructing calls @cindex forwarding calls Using the built-in functions described below, you can record the arguments a function received, and call another function with the same arguments, without knowing the number or types of the arguments. You can also record the return value of that function call, and later return that value, without knowing what data type the function tried to return (as long as your caller expects that data type). However, these built-in functions may interact badly with some sophisticated features or other extensions of the language. It is, therefore, not recommended to use them outside very simple functions acting as mere forwarders for their arguments. @deftypefn {Built-in Function} {void *} __builtin_apply_args () This built-in function returns a pointer to data describing how to perform a call with the same arguments as were passed to the current function. The function saves the arg pointer register, structure value address, and all registers that might be used to pass arguments to a function into a block of memory allocated on the stack. Then it returns the address of that block. @end deftypefn @deftypefn {Built-in Function} {void *} __builtin_apply (void (*@var{function})(), void *@var{arguments}, size_t @var{size}) This built-in function invokes @var{function} with a copy of the parameters described by @var{arguments} and @var{size}. The value of @var{arguments} should be the value returned by @code{__builtin_apply_args}. The argument @var{size} specifies the size of the stack argument data, in bytes. This function returns a pointer to data describing how to return whatever value was returned by @var{function}. The data is saved in a block of memory allocated on the stack. It is not always simple to compute the proper value for @var{size}. The value is used by @code{__builtin_apply} to compute the amount of data that should be pushed on the stack and copied from the incoming argument area. @end deftypefn @deftypefn {Built-in Function} {void} __builtin_return (void *@var{result}) This built-in function returns the value described by @var{result} from the containing function. You should specify, for @var{result}, a value returned by @code{__builtin_apply}. @end deftypefn @node Typeof @section Referring to a Type with @code{typeof} @findex typeof @findex sizeof @cindex macros, types of arguments Another way to refer to the type of an expression is with @code{typeof}. The syntax of using of this keyword looks like @code{sizeof}, but the construct acts semantically like a type name defined with @code{typedef}. There are two ways of writing the argument to @code{typeof}: with an expression or with a type. Here is an example with an expression: @smallexample typeof (x[0](1)) @end smallexample @noindent This assumes that @code{x} is an array of pointers to functions; the type described is that of the values of the functions. Here is an example with a typename as the argument: @smallexample typeof (int *) @end smallexample @noindent Here the type described is that of pointers to @code{int}. If you are writing a header file that must work when included in ISO C programs, write @code{__typeof__} instead of @code{typeof}. @xref{Alternate Keywords}. A @code{typeof}-construct can be used anywhere a typedef name could be used. For example, you can use it in a declaration, in a cast, or inside of @code{sizeof} or @code{typeof}. @code{typeof} is often useful in conjunction with the statements-within-expressions feature. Here is how the two together can be used to define a safe ``maximum'' macro that operates on any arithmetic type and evaluates each of its arguments exactly once: @smallexample #define max(a,b) \ (@{ typeof (a) _a = (a); \ typeof (b) _b = (b); \ _a > _b ? _a : _b; @}) @end smallexample @cindex underscores in variables in macros @cindex @samp{_} in variables in macros @cindex local variables in macros @cindex variables, local, in macros @cindex macros, local variables in The reason for using names that start with underscores for the local variables is to avoid conflicts with variable names that occur within the expressions that are substituted for @code{a} and @code{b}. Eventually we hope to design a new form of declaration syntax that allows you to declare variables whose scopes start only after their initializers; this will be a more reliable way to prevent such conflicts. @noindent Some more examples of the use of @code{typeof}: @itemize @bullet @item This declares @code{y} with the type of what @code{x} points to. @smallexample typeof (*x) y; @end smallexample @item This declares @code{y} as an array of such values. @smallexample typeof (*x) y[4]; @end smallexample @item This declares @code{y} as an array of pointers to characters: @smallexample typeof (typeof (char *)[4]) y; @end smallexample @noindent It is equivalent to the following traditional C declaration: @smallexample char *y[4]; @end smallexample To see the meaning of the declaration using @code{typeof}, and why it might be a useful way to write, rewrite it with these macros: @smallexample #define pointer(T) typeof(T *) #define array(T, N) typeof(T [N]) @end smallexample @noindent Now the declaration can be rewritten this way: @smallexample array (pointer (char), 4) y; @end smallexample @noindent Thus, @code{array (pointer (char), 4)} is the type of arrays of 4 pointers to @code{char}. @end itemize @emph{Compatibility Note:} In addition to @code{typeof}, GCC 2 supported a more limited extension which permitted one to write @smallexample typedef @var{T} = @var{expr}; @end smallexample @noindent with the effect of declaring @var{T} to have the type of the expression @var{expr}. This extension does not work with GCC 3 (versions between 3.0 and 3.2 will crash; 3.2.1 and later give an error). Code which relies on it should be rewritten to use @code{typeof}: @smallexample typedef typeof(@var{expr}) @var{T}; @end smallexample @noindent This will work with all versions of GCC@. @node Conditionals @section Conditionals with Omitted Operands @cindex conditional expressions, extensions @cindex omitted middle-operands @cindex middle-operands, omitted @cindex extensions, @code{?:} @cindex @code{?:} extensions The middle operand in a conditional expression may be omitted. Then if the first operand is nonzero, its value is the value of the conditional expression. Therefore, the expression @smallexample x ? : y @end smallexample @noindent has the value of @code{x} if that is nonzero; otherwise, the value of @code{y}. This example is perfectly equivalent to @smallexample x ? x : y @end smallexample @cindex side effect in ?: @cindex ?: side effect @noindent In this simple case, the ability to omit the middle operand is not especially useful. When it becomes useful is when the first operand does, or may (if it is a macro argument), contain a side effect. Then repeating the operand in the middle would perform the side effect twice. Omitting the middle operand uses the value already computed without the undesirable effects of recomputing it. @node Long Long @section Double-Word Integers @cindex @code{long long} data types @cindex double-word arithmetic @cindex multiprecision arithmetic @cindex @code{LL} integer suffix @cindex @code{ULL} integer suffix ISO C99 supports data types for integers that are at least 64 bits wide, and as an extension GCC supports them in C89 mode and in C++. Simply write @code{long long int} for a signed integer, or @code{unsigned long long int} for an unsigned integer. To make an integer constant of type @code{long long int}, add the suffix @samp{LL} to the integer. To make an integer constant of type @code{unsigned long long int}, add the suffix @samp{ULL} to the integer. You can use these types in arithmetic like any other integer types. Addition, subtraction, and bitwise boolean operations on these types are open-coded on all types of machines. Multiplication is open-coded if the machine supports fullword-to-doubleword a widening multiply instruction. Division and shifts are open-coded only on machines that provide special support. The operations that are not open-coded use special library routines that come with GCC@. There may be pitfalls when you use @code{long long} types for function arguments, unless you declare function prototypes. If a function expects type @code{int} for its argument, and you pass a value of type @code{long long int}, confusion will result because the caller and the subroutine will disagree about the number of bytes for the argument. Likewise, if the function expects @code{long long int} and you pass @code{int}. The best way to avoid such problems is to use prototypes. @node Complex @section Complex Numbers @cindex complex numbers @cindex @code{_Complex} keyword @cindex @code{__complex__} keyword ISO C99 supports complex floating data types, and as an extension GCC supports them in C89 mode and in C++, and supports complex integer data types which are not part of ISO C99. You can declare complex types using the keyword @code{_Complex}. As an extension, the older GNU keyword @code{__complex__} is also supported. For example, @samp{_Complex double x;} declares @code{x} as a variable whose real part and imaginary part are both of type @code{double}. @samp{_Complex short int y;} declares @code{y} to have real and imaginary parts of type @code{short int}; this is not likely to be useful, but it shows that the set of complex types is complete. To write a constant with a complex data type, use the suffix @samp{i} or @samp{j} (either one; they are equivalent). For example, @code{2.5fi} has type @code{_Complex float} and @code{3i} has type @code{_Complex int}. Such a constant always has a pure imaginary value, but you can form any complex value you like by adding one to a real constant. This is a GNU extension; if you have an ISO C99 conforming C library (such as GNU libc), and want to construct complex constants of floating type, you should include @code{} and use the macros @code{I} or @code{_Complex_I} instead. @cindex @code{__real__} keyword @cindex @code{__imag__} keyword To extract the real part of a complex-valued expression @var{exp}, write @code{__real__ @var{exp}}. Likewise, use @code{__imag__} to extract the imaginary part. This is a GNU extension; for values of floating type, you should use the ISO C99 functions @code{crealf}, @code{creal}, @code{creall}, @code{cimagf}, @code{cimag} and @code{cimagl}, declared in @code{} and also provided as built-in functions by GCC@. @cindex complex conjugation The operator @samp{~} performs complex conjugation when used on a value with a complex type. This is a GNU extension; for values of floating type, you should use the ISO C99 functions @code{conjf}, @code{conj} and @code{conjl}, declared in @code{} and also provided as built-in functions by GCC@. GCC can allocate complex automatic variables in a noncontiguous fashion; it's even possible for the real part to be in a register while the imaginary part is on the stack (or vice-versa). Only the DWARF2 debug info format can represent this, so use of DWARF2 is recommended. If you are using the stabs debug info format, GCC describes a noncontiguous complex variable as if it were two separate variables of noncomplex type. If the variable's actual name is @code{foo}, the two fictitious variables are named @code{foo$real} and @code{foo$imag}. You can examine and set these two fictitious variables with your debugger. @node Decimal Float @section Decimal Floating Types @cindex decimal floating types @cindex @code{_Decimal32} data type @cindex @code{_Decimal64} data type @cindex @code{_Decimal128} data type @cindex @code{df} integer suffix @cindex @code{dd} integer suffix @cindex @code{dl} integer suffix @cindex @code{DF} integer suffix @cindex @code{DD} integer suffix @cindex @code{DL} integer suffix As an extension, the GNU C compiler supports decimal floating types as defined in the N1176 draft of ISO/IEC WDTR24732. Support for decimal floating types in GCC will evolve as the draft technical report changes. Calling conventions for any target might also change. Not all targets support decimal floating types. The decimal floating types are @code{_Decimal32}, @code{_Decimal64}, and @code{_Decimal128}. They use a radix of ten, unlike the floating types @code{float}, @code{double}, and @code{long double} whose radix is not specified by the C standard but is usually two. Support for decimal floating types includes the arithmetic operators add, subtract, multiply, divide; unary arithmetic operators; relational operators; equality operators; and conversions to and from integer and other floating types. Use a suffix @samp{df} or @samp{DF} in a literal constant of type @code{_Decimal32}, @samp{dd} or @samp{DD} for @code{_Decimal64}, and @samp{dl} or @samp{DL} for @code{_Decimal128}. GCC support of decimal float as specified by the draft technical report is incomplete: @itemize @bullet @item Translation time data type (TTDT) is not supported. @item Characteristics of decimal floating types are defined in header file @file{decfloat.h} rather than @file{float.h}. @item When the value of a decimal floating type cannot be represented in the integer type to which it is being converted, the result is undefined rather than the result value specified by the draft technical report. @end itemize Types @code{_Decimal32}, @code{_Decimal64}, and @code{_Decimal128} are supported by the DWARF2 debug information format. @node Hex Floats @section Hex Floats @cindex hex floats ISO C99 supports floating-point numbers written not only in the usual decimal notation, such as @code{1.55e1}, but also numbers such as @code{0x1.fp3} written in hexadecimal format. As a GNU extension, GCC supports this in C89 mode (except in some cases when strictly conforming) and in C++. In that format the @samp{0x} hex introducer and the @samp{p} or @samp{P} exponent field are mandatory. The exponent is a decimal number that indicates the power of 2 by which the significant part will be multiplied. Thus @samp{0x1.f} is @tex $1 {15\over16}$, @end tex @ifnottex 1 15/16, @end ifnottex @samp{p3} multiplies it by 8, and the value of @code{0x1.fp3} is the same as @code{1.55e1}. Unlike for floating-point numbers in the decimal notation the exponent is always required in the hexadecimal notation. Otherwise the compiler would not be able to resolve the ambiguity of, e.g., @code{0x1.f}. This could mean @code{1.0f} or @code{1.9375} since @samp{f} is also the extension for floating-point constants of type @code{float}. @node Zero Length @section Arrays of Length Zero @cindex arrays of length zero @cindex zero-length arrays @cindex length-zero arrays @cindex flexible array members Zero-length arrays are allowed in GNU C@. They are very useful as the last element of a structure which is really a header for a variable-length object: @smallexample struct line @{ int length; char contents[0]; @}; struct line *thisline = (struct line *) malloc (sizeof (struct line) + this_length); thisline->length = this_length; @end smallexample In ISO C90, you would have to give @code{contents} a length of 1, which means either you waste space or complicate the argument to @code{malloc}. In ISO C99, you would use a @dfn{flexible array member}, which is slightly different in syntax and semantics: @itemize @bullet @item Flexible array members are written as @code{contents[]} without the @code{0}. @item Flexible array members have incomplete type, and so the @code{sizeof} operator may not be applied. As a quirk of the original implementation of zero-length arrays, @code{sizeof} evaluates to zero. @item Flexible array members may only appear as the last member of a @code{struct} that is otherwise non-empty. @item A structure containing a flexible array member, or a union containing such a structure (possibly recursively), may not be a member of a structure or an element of an array. (However, these uses are permitted by GCC as extensions.) @end itemize GCC versions before 3.0 allowed zero-length arrays to be statically initialized, as if they were flexible arrays. In addition to those cases that were useful, it also allowed initializations in situations that would corrupt later data. Non-empty initialization of zero-length arrays is now treated like any case where there are more initializer elements than the array holds, in that a suitable warning about "excess elements in array" is given, and the excess elements (all of them, in this case) are ignored. Instead GCC allows static initialization of flexible array members. This is equivalent to defining a new structure containing the original structure followed by an array of sufficient size to contain the data. I.e.@: in the following, @code{f1} is constructed as if it were declared like @code{f2}. @smallexample struct f1 @{ int x; int y[]; @} f1 = @{ 1, @{ 2, 3, 4 @} @}; struct f2 @{ struct f1 f1; int data[3]; @} f2 = @{ @{ 1 @}, @{ 2, 3, 4 @} @}; @end smallexample @noindent The convenience of this extension is that @code{f1} has the desired type, eliminating the need to consistently refer to @code{f2.f1}. This has symmetry with normal static arrays, in that an array of unknown size is also written with @code{[]}. Of course, this extension only makes sense if the extra data comes at the end of a top-level object, as otherwise we would be overwriting data at subsequent offsets. To avoid undue complication and confusion with initialization of deeply nested arrays, we simply disallow any non-empty initialization except when the structure is the top-level object. For example: @smallexample struct foo @{ int x; int y[]; @}; struct bar @{ struct foo z; @}; struct foo a = @{ 1, @{ 2, 3, 4 @} @}; // @r{Valid.} struct bar b = @{ @{ 1, @{ 2, 3, 4 @} @} @}; // @r{Invalid.} struct bar c = @{ @{ 1, @{ @} @} @}; // @r{Valid.} struct foo d[1] = @{ @{ 1 @{ 2, 3, 4 @} @} @}; // @r{Invalid.} @end smallexample @node Empty Structures @section Structures With No Members @cindex empty structures @cindex zero-size structures GCC permits a C structure to have no members: @smallexample struct empty @{ @}; @end smallexample The structure will have size zero. In C++, empty structures are part of the language. G++ treats empty structures as if they had a single member of type @code{char}. @node Variable Length @section Arrays of Variable Length @cindex variable-length arrays @cindex arrays of variable length @cindex VLAs Variable-length automatic arrays are allowed in ISO C99, and as an extension GCC accepts them in C89 mode and in C++. (However, GCC's implementation of variable-length arrays does not yet conform in detail to the ISO C99 standard.) These arrays are declared like any other automatic arrays, but with a length that is not a constant expression. The storage is allocated at the point of declaration and deallocated when the brace-level is exited. For example: @smallexample FILE * concat_fopen (char *s1, char *s2, char *mode) @{ char str[strlen (s1) + strlen (s2) + 1]; strcpy (str, s1); strcat (str, s2); return fopen (str, mode); @} @end smallexample @cindex scope of a variable length array @cindex variable-length array scope @cindex deallocating variable length arrays Jumping or breaking out of the scope of the array name deallocates the storage. Jumping into the scope is not allowed; you get an error message for it. @cindex @code{alloca} vs variable-length arrays You can use the function @code{alloca} to get an effect much like variable-length arrays. The function @code{alloca} is available in many other C implementations (but not in all). On the other hand, variable-length arrays are more elegant. There are other differences between these two methods. Space allocated with @code{alloca} exists until the containing @emph{function} returns. The space for a variable-length array is deallocated as soon as the array name's scope ends. (If you use both variable-length arrays and @code{alloca} in the same function, deallocation of a variable-length array will also deallocate anything more recently allocated with @code{alloca}.) You can also use variable-length arrays as arguments to functions: @smallexample struct entry tester (int len, char data[len][len]) @{ /* @r{@dots{}} */ @} @end smallexample The length of an array is computed once when the storage is allocated and is remembered for the scope of the array in case you access it with @code{sizeof}. If you want to pass the array first and the length afterward, you can use a forward declaration in the parameter list---another GNU extension. @smallexample struct entry tester (int len; char data[len][len], int len) @{ /* @r{@dots{}} */ @} @end smallexample @cindex parameter forward declaration The @samp{int len} before the semicolon is a @dfn{parameter forward declaration}, and it serves the purpose of making the name @code{len} known when the declaration of @code{data} is parsed. You can write any number of such parameter forward declarations in the parameter list. They can be separated by commas or semicolons, but the last one must end with a semicolon, which is followed by the ``real'' parameter declarations. Each forward declaration must match a ``real'' declaration in parameter name and data type. ISO C99 does not support parameter forward declarations. @node Variadic Macros @section Macros with a Variable Number of Arguments. @cindex variable number of arguments @cindex macro with variable arguments @cindex rest argument (in macro) @cindex variadic macros In the ISO C standard of 1999, a macro can be declared to accept a variable number of arguments much as a function can. The syntax for defining the macro is similar to that of a function. Here is an example: @smallexample #define debug(format, ...) fprintf (stderr, format, __VA_ARGS__) @end smallexample Here @samp{@dots{}} is a @dfn{variable argument}. In the invocation of such a macro, it represents the zero or more tokens until the closing parenthesis that ends the invocation, including any commas. This set of tokens replaces the identifier @code{__VA_ARGS__} in the macro body wherever it appears. See the CPP manual for more information. GCC has long supported variadic macros, and used a different syntax that allowed you to give a name to the variable arguments just like any other argument. Here is an example: @smallexample #define debug(format, args...) fprintf (stderr, format, args) @end smallexample This is in all ways equivalent to the ISO C example above, but arguably more readable and descriptive. GNU CPP has two further variadic macro extensions, and permits them to be used with either of the above forms of macro definition. In standard C, you are not allowed to leave the variable argument out entirely; but you are allowed to pass an empty argument. For example, this invocation is invalid in ISO C, because there is no comma after the string: @smallexample debug ("A message") @end smallexample GNU CPP permits you to completely omit the variable arguments in this way. In the above examples, the compiler would complain, though since the expansion of the macro still has the extra comma after the format string. To help solve this problem, CPP behaves specially for variable arguments used with the token paste operator, @samp{##}. If instead you write @smallexample #define debug(format, ...) fprintf (stderr, format, ## __VA_ARGS__) @end smallexample and if the variable arguments are omitted or empty, the @samp{##} operator causes the preprocessor to remove the comma before it. If you do provide some variable arguments in your macro invocation, GNU CPP does not complain about the paste operation and instead places the variable arguments after the comma. Just like any other pasted macro argument, these arguments are not macro expanded. @node Escaped Newlines @section Slightly Looser Rules for Escaped Newlines @cindex escaped newlines @cindex newlines (escaped) Recently, the preprocessor has relaxed its treatment of escaped newlines. Previously, the newline had to immediately follow a backslash. The current implementation allows whitespace in the form of spaces, horizontal and vertical tabs, and form feeds between the backslash and the subsequent newline. The preprocessor issues a warning, but treats it as a valid escaped newline and combines the two lines to form a single logical line. This works within comments and tokens, as well as between tokens. Comments are @emph{not} treated as whitespace for the purposes of this relaxation, since they have not yet been replaced with spaces. @node Subscripting @section Non-Lvalue Arrays May Have Subscripts @cindex subscripting @cindex arrays, non-lvalue @cindex subscripting and function values In ISO C99, arrays that are not lvalues still decay to pointers, and may be subscripted, although they may not be modified or used after the next sequence point and the unary @samp{&} operator may not be applied to them. As an extension, GCC allows such arrays to be subscripted in C89 mode, though otherwise they do not decay to pointers outside C99 mode. For example, this is valid in GNU C though not valid in C89: @smallexample @group struct foo @{int a[4];@}; struct foo f(); bar (int index) @{ return f().a[index]; @} @end group @end smallexample @node Pointer Arith @section Arithmetic on @code{void}- and Function-Pointers @cindex void pointers, arithmetic @cindex void, size of pointer to @cindex function pointers, arithmetic @cindex function, size of pointer to In GNU C, addition and subtraction operations are supported on pointers to @code{void} and on pointers to functions. This is done by treating the size of a @code{void} or of a function as 1. A consequence of this is that @code{sizeof} is also allowed on @code{void} and on function types, and returns 1. @opindex Wpointer-arith The option @option{-Wpointer-arith} requests a warning if these extensions are used. @node Initializers @section Non-Constant Initializers @cindex initializers, non-constant @cindex non-constant initializers As in standard C++ and ISO C99, the elements of an aggregate initializer for an automatic variable are not required to be constant expressions in GNU C@. Here is an example of an initializer with run-time varying elements: @smallexample foo (float f, float g) @{ float beat_freqs[2] = @{ f-g, f+g @}; /* @r{@dots{}} */ @} @end smallexample @node Compound Literals @section Compound Literals @cindex constructor expressions @cindex initializations in expressions @cindex structures, constructor expression @cindex expressions, constructor @cindex compound literals @c The GNU C name for what C99 calls compound literals was "constructor expressions". ISO C99 supports compound literals. A compound literal looks like a cast containing an initializer. Its value is an object of the type specified in the cast, containing the elements specified in the initializer; it is an lvalue. As an extension, GCC supports compound literals in C89 mode and in C++. Usually, the specified type is a structure. Assume that @code{struct foo} and @code{structure} are declared as shown: @smallexample struct foo @{int a; char b[2];@} structure; @end smallexample @noindent Here is an example of constructing a @code{struct foo} with a compound literal: @smallexample structure = ((struct foo) @{x + y, 'a', 0@}); @end smallexample @noindent This is equivalent to writing the following: @smallexample @{ struct foo temp = @{x + y, 'a', 0@}; structure = temp; @} @end smallexample You can also construct an array. If all the elements of the compound literal are (made up of) simple constant expressions, suitable for use in initializers of objects of static storage duration, then the compound literal can be coerced to a pointer to its first element and used in such an initializer, as shown here: @smallexample char **foo = (char *[]) @{ "x", "y", "z" @}; @end smallexample Compound literals for scalar types and union types are is also allowed, but then the compound literal is equivalent to a cast. As a GNU extension, GCC allows initialization of objects with static storage duration by compound literals (which is not possible in ISO C99, because the initializer is not a constant). It is handled as if the object was initialized only with the bracket enclosed list if the types of the compound literal and the object match. The initializer list of the compound literal must be constant. If the object being initialized has array type of unknown size, the size is determined by compound literal size. @smallexample static struct foo x = (struct foo) @{1, 'a', 'b'@}; static int y[] = (int []) @{1, 2, 3@}; static int z[] = (int [3]) @{1@}; @end smallexample @noindent The above lines are equivalent to the following: @smallexample static struct foo x = @{1, 'a', 'b'@}; static int y[] = @{1, 2, 3@}; static int z[] = @{1, 0, 0@}; @end smallexample @node Designated Inits @section Designated Initializers @cindex initializers with labeled elements @cindex labeled elements in initializers @cindex case labels in initializers @cindex designated initializers Standard C89 requires the elements of an initializer to appear in a fixed order, the same as the order of the elements in the array or structure being initialized. In ISO C99 you can give the elements in any order, specifying the array indices or structure field names they apply to, and GNU C allows this as an extension in C89 mode as well. This extension is not implemented in GNU C++. To specify an array index, write @samp{[@var{index}] =} before the element value. For example, @smallexample int a[6] = @{ [4] = 29, [2] = 15 @}; @end smallexample @noindent is equivalent to @smallexample int a[6] = @{ 0, 0, 15, 0, 29, 0 @}; @end smallexample @noindent The index values must be constant expressions, even if the array being initialized is automatic. An alternative syntax for this which has been obsolete since GCC 2.5 but GCC still accepts is to write @samp{[@var{index}]} before the element value, with no @samp{=}. To initialize a range of elements to the same value, write @samp{[@var{first} ... @var{last}] = @var{value}}. This is a GNU extension. For example, @smallexample int widths[] = @{ [0 ... 9] = 1, [10 ... 99] = 2, [100] = 3 @}; @end smallexample @noindent If the value in it has side-effects, the side-effects will happen only once, not for each initialized field by the range initializer. @noindent Note that the length of the array is the highest value specified plus one. In a structure initializer, specify the name of a field to initialize with @samp{.@var{fieldname} =} before the element value. For example, given the following structure, @smallexample struct point @{ int x, y; @}; @end smallexample @noindent the following initialization @smallexample struct point p = @{ .y = yvalue, .x = xvalue @}; @end smallexample @noindent is equivalent to @smallexample struct point p = @{ xvalue, yvalue @}; @end smallexample Another syntax which has the same meaning, obsolete since GCC 2.5, is @samp{@var{fieldname}:}, as shown here: @smallexample struct point p = @{ y: yvalue, x: xvalue @}; @end smallexample @cindex designators The @samp{[@var{index}]} or @samp{.@var{fieldname}} is known as a @dfn{designator}. You can also use a designator (or the obsolete colon syntax) when initializing a union, to specify which element of the union should be used. For example, @smallexample union foo @{ int i; double d; @}; union foo f = @{ .d = 4 @}; @end smallexample @noindent will convert 4 to a @code{double} to store it in the union using the second element. By contrast, casting 4 to type @code{union foo} would store it into the union as the integer @code{i}, since it is an integer. (@xref{Cast to Union}.) You can combine this technique of naming elements with ordinary C initialization of successive elements. Each initializer element that does not have a designator applies to the next consecutive element of the array or structure. For example, @smallexample int a[6] = @{ [1] = v1, v2, [4] = v4 @}; @end smallexample @noindent is equivalent to @smallexample int a[6] = @{ 0, v1, v2, 0, v4, 0 @}; @end smallexample Labeling the elements of an array initializer is especially useful when the indices are characters or belong to an @code{enum} type. For example: @smallexample int whitespace[256] = @{ [' '] = 1, ['\t'] = 1, ['\h'] = 1, ['\f'] = 1, ['\n'] = 1, ['\r'] = 1 @}; @end smallexample @cindex designator lists You can also write a series of @samp{.@var{fieldname}} and @samp{[@var{index}]} designators before an @samp{=} to specify a nested subobject to initialize; the list is taken relative to the subobject corresponding to the closest surrounding brace pair. For example, with the @samp{struct point} declaration above: @smallexample struct point ptarray[10] = @{ [2].y = yv2, [2].x = xv2, [0].x = xv0 @}; @end smallexample @noindent If the same field is initialized multiple times, it will have value from the last initialization. If any such overridden initialization has side-effect, it is unspecified whether the side-effect happens or not. Currently, GCC will discard them and issue a warning. @node Case Ranges @section Case Ranges @cindex case ranges @cindex ranges in case statements You can specify a range of consecutive values in a single @code{case} label, like this: @smallexample case @var{low} ... @var{high}: @end smallexample @noindent This has the same effect as the proper number of individual @code{case} labels, one for each integer value from @var{low} to @var{high}, inclusive. This feature is especially useful for ranges of ASCII character codes: @smallexample case 'A' ... 'Z': @end smallexample @strong{Be careful:} Write spaces around the @code{...}, for otherwise it may be parsed wrong when you use it with integer values. For example, write this: @smallexample case 1 ... 5: @end smallexample @noindent rather than this: @smallexample case 1...5: @end smallexample @node Cast to Union @section Cast to a Union Type @cindex cast to a union @cindex union, casting to a A cast to union type is similar to other casts, except that the type specified is a union type. You can specify the type either with @code{union @var{tag}} or with a typedef name. A cast to union is actually a constructor though, not a cast, and hence does not yield an lvalue like normal casts. (@xref{Compound Literals}.) The types that may be cast to the union type are those of the members of the union. Thus, given the following union and variables: @smallexample union foo @{ int i; double d; @}; int x; double y; @end smallexample @noindent both @code{x} and @code{y} can be cast to type @code{union foo}. Using the cast as the right-hand side of an assignment to a variable of union type is equivalent to storing in a member of the union: @smallexample union foo u; /* @r{@dots{}} */ u = (union foo) x @equiv{} u.i = x u = (union foo) y @equiv{} u.d = y @end smallexample You can also use the union cast as a function argument: @smallexample void hack (union foo); /* @r{@dots{}} */ hack ((union foo) x); @end smallexample @node Mixed Declarations @section Mixed Declarations and Code @cindex mixed declarations and code @cindex declarations, mixed with code @cindex code, mixed with declarations ISO C99 and ISO C++ allow declarations and code to be freely mixed within compound statements. As an extension, GCC also allows this in C89 mode. For example, you could do: @smallexample int i; /* @r{@dots{}} */ i++; int j = i + 2; @end smallexample Each identifier is visible from where it is declared until the end of the enclosing block. @node Function Attributes @section Declaring Attributes of Functions @cindex function attributes @cindex declaring attributes of functions @cindex functions that never return @cindex functions that return more than once @cindex functions that have no side effects @cindex functions in arbitrary sections @cindex functions that behave like malloc @cindex @code{volatile} applied to function @cindex @code{const} applied to function @cindex functions with @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style arguments @cindex functions with non-null pointer arguments @cindex functions that are passed arguments in registers on the 386 @cindex functions that pop the argument stack on the 386 @cindex functions that do not pop the argument stack on the 386 In GNU C, you declare certain things about functions called in your program which help the compiler optimize function calls and check your code more carefully. The keyword @code{__attribute__} allows you to specify special attributes when making a declaration. This keyword is followed by an attribute specification inside double parentheses. The following attributes are currently defined for functions on all targets: @code{noreturn}, @code{returns_twice}, @code{noinline}, @code{always_inline}, @code{flatten}, @code{pure}, @code{const}, @code{nothrow}, @code{sentinel}, @code{format}, @code{format_arg}, @code{no_instrument_function}, @code{section}, @code{constructor}, @code{destructor}, @code{used}, @code{unused}, @code{deprecated}, @code{weak}, @code{malloc}, @code{alias}, @code{warn_unused_result}, @code{nonnull}, @code{gnu_inline} and @code{externally_visible}. Several other attributes are defined for functions on particular target systems. Other attributes, including @code{section} are supported for variables declarations (@pxref{Variable Attributes}) and for types (@pxref{Type Attributes}). You may also specify attributes with @samp{__} preceding and following each keyword. This allows you to use them in header files without being concerned about a possible macro of the same name. For example, you may use @code{__noreturn__} instead of @code{noreturn}. @xref{Attribute Syntax}, for details of the exact syntax for using attributes. @table @code @c Keep this table alphabetized by attribute name. Treat _ as space. @item alias ("@var{target}") @cindex @code{alias} attribute The @code{alias} attribute causes the declaration to be emitted as an alias for another symbol, which must be specified. For instance, @smallexample void __f () @{ /* @r{Do something.} */; @} void f () __attribute__ ((weak, alias ("__f"))); @end smallexample defines @samp{f} to be a weak alias for @samp{__f}. In C++, the mangled name for the target must be used. It is an error if @samp{__f} is not defined in the same translation unit. Not all target machines support this attribute. @item always_inline @cindex @code{always_inline} function attribute Generally, functions are not inlined unless optimization is specified. For functions declared inline, this attribute inlines the function even if no optimization level was specified. @item gnu_inline @cindex @code{gnu_inline} function attribute This attribute should be used with a function which is also declared with the @code{inline} keyword. It directs GCC to treat the function as if it were defined in gnu89 mode even when compiling in C99 or gnu99 mode. If the function is declared @code{extern}, then this definition of the function is used only for inlining. In no case is the function compiled as a standalone function, not even if you take its address explicitly. Such an address becomes an external reference, as if you had only declared the function, and had not defined it. This has almost the effect of a macro. The way to use this is to put a function definition in a header file with this attribute, and put another copy of the function, without @code{extern}, in a library file. The definition in the header file will cause most calls to the function to be inlined. If any uses of the function remain, they will refer to the single copy in the library. Note that the two definitions of the functions need not be precisely the same, although if they do not have the same effect your program may behave oddly. If the function is neither @code{extern} nor @code{static}, then the function is compiled as a standalone function, as well as being inlined where possible. This is how GCC traditionally handled functions declared @code{inline}. Since ISO C99 specifies a different semantics for @code{inline}, this function attribute is provided as a transition measure and as a useful feature in its own right. This attribute is available in GCC 4.1.3 and later. It is available if either of the preprocessor macros @code{__GNUC_GNU_INLINE__} or @code{__GNUC_STDC_INLINE__} are defined. @xref{Inline,,An Inline Function is As Fast As a Macro}. Note that since the first version of GCC to support C99 inline semantics is 4.3, earlier versions of GCC which accept this attribute effectively assume that it is always present, whether or not it is given explicitly. In versions prior to 4.3, the only effect of explicitly including it is to disable warnings about using inline functions in C99 mode. @cindex @code{flatten} function attribute @item flatten Generally, inlining into a function is limited. For a function marked with this attribute, every call inside this function will be inlined, if possible. Whether the function itself is considered for inlining depends on its size and the current inlining parameters. The @code{flatten} attribute only works reliably in unit-at-a-time mode. @item cdecl @cindex functions that do pop the argument stack on the 386 @opindex mrtd On the Intel 386, the @code{cdecl} attribute causes the compiler to assume that the calling function will pop off the stack space used to pass arguments. This is useful to override the effects of the @option{-mrtd} switch. @item const @cindex @code{const} function attribute Many functions do not examine any values except their arguments, and have no effects except the return value. Basically this is just slightly more strict class than the @code{pure} attribute below, since function is not allowed to read global memory. @cindex pointer arguments Note that a function that has pointer arguments and examines the data pointed to must @emph{not} be declared @code{const}. Likewise, a function that calls a non-@code{const} function usually must not be @code{const}. It does not make sense for a @code{const} function to return @code{void}. The attribute @code{const} is not implemented in GCC versions earlier than 2.5. An alternative way to declare that a function has no side effects, which works in the current version and in some older versions, is as follows: @smallexample typedef int intfn (); extern const intfn square; @end smallexample This approach does not work in GNU C++ from 2.6.0 on, since the language specifies that the @samp{const} must be attached to the return value. @item constructor @itemx destructor @cindex @code{constructor} function attribute @cindex @code{destructor} function attribute The @code{constructor} attribute causes the function to be called automatically before execution enters @code{main ()}. Similarly, the @code{destructor} attribute causes the function to be called automatically after @code{main ()} has completed or @code{exit ()} has been called. Functions with these attributes are useful for initializing data that will be used implicitly during the execution of the program. @item deprecated @cindex @code{deprecated} attribute. The @code{deprecated} attribute results in a warning if the function is used anywhere in the source file. This is useful when identifying functions that are expected to be removed in a future version of a program. The warning also includes the location of the declaration of the deprecated function, to enable users to easily find further information about why the function is deprecated, or what they should do instead. Note that the warnings only occurs for uses: @smallexample int old_fn () __attribute__ ((deprecated)); int old_fn (); int (*fn_ptr)() = old_fn; @end smallexample results in a warning on line 3 but not line 2. The @code{deprecated} attribute can also be used for variables and types (@pxref{Variable Attributes}, @pxref{Type Attributes}.) @item dllexport @cindex @code{__declspec(dllexport)} On Microsoft Windows targets and Symbian OS targets the @code{dllexport} attribute causes the compiler to provide a global pointer to a pointer in a DLL, so that it can be referenced with the @code{dllimport} attribute. On Microsoft Windows targets, the pointer name is formed by combining @code{_imp__} and the function or variable name. You can use @code{__declspec(dllexport)} as a synonym for @code{__attribute__ ((dllexport))} for compatibility with other compilers. On systems that support the @code{visibility} attribute, this attribute also implies ``default'' visibility, unless a @code{visibility} attribute is explicitly specified. You should avoid the use of @code{dllexport} with ``hidden'' or ``internal'' visibility; in the future GCC may issue an error for those cases. Currently, the @code{dllexport} attribute is ignored for inlined functions, unless the @option{-fkeep-inline-functions} flag has been used. The attribute is also ignored for undefined symbols. When applied to C++ classes, the attribute marks defined non-inlined member functions and static data members as exports. Static consts initialized in-class are not marked unless they are also defined out-of-class. For Microsoft Windows targets there are alternative methods for including the symbol in the DLL's export table such as using a @file{.def} file with an @code{EXPORTS} section or, with GNU ld, using the @option{--export-all} linker flag. @item dllimport @cindex @code{__declspec(dllimport)} On Microsoft Windows and Symbian OS targets, the @code{dllimport} attribute causes the compiler to reference a function or variable via a global pointer to a pointer that is set up by the DLL exporting the symbol. The attribute implies @code{extern} storage. On Microsoft Windows targets, the pointer name is formed by combining @code{_imp__} and the function or variable name. You can use @code{__declspec(dllimport)} as a synonym for @code{__attribute__ ((dllimport))} for compatibility with other compilers. Currently, the attribute is ignored for inlined functions. If the attribute is applied to a symbol @emph{definition}, an error is reported. If a symbol previously declared @code{dllimport} is later defined, the attribute is ignored in subsequent references, and a warning is emitted. The attribute is also overridden by a subsequent declaration as @code{dllexport}. When applied to C++ classes, the attribute marks non-inlined member functions and static data members as imports. However, the attribute is ignored for virtual methods to allow creation of vtables using thunks. On the SH Symbian OS target the @code{dllimport} attribute also has another affect---it can cause the vtable and run-time type information for a class to be exported. This happens when the class has a dllimport'ed constructor or a non-inline, non-pure virtual function and, for either of those two conditions, the class also has a inline constructor or destructor and has a key function that is defined in the current translation unit. For Microsoft Windows based targets the use of the @code{dllimport} attribute on functions is not necessary, but provides a small performance benefit by eliminating a thunk in the DLL@. The use of the @code{dllimport} attribute on imported variables was required on older versions of the GNU linker, but can now be avoided by passing the @option{--enable-auto-import} switch to the GNU linker. As with functions, using the attribute for a variable eliminates a thunk in the DLL@. One drawback to using this attribute is that a pointer to a function or variable marked as @code{dllimport} cannot be used as a constant address. On Microsoft Windows targets, the attribute can be disabled for functions by setting the @option{-mnop-fun-dllimport} flag. @item eightbit_data @cindex eight bit data on the H8/300, H8/300H, and H8S Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight bit data section. The compiler will generate more efficient code for certain operations on data in the eight bit data area. Note the eight bit data area is limited to 256 bytes of data. You must use GAS and GLD from GNU binutils version 2.7 or later for this attribute to work correctly. @item exception_handler @cindex exception handler functions on the Blackfin processor Use this attribute on the Blackfin to indicate that the specified function is an exception handler. The compiler will generate function entry and exit sequences suitable for use in an exception handler when this attribute is present. @item far @cindex functions which handle memory bank switching On 68HC11 and 68HC12 the @code{far} attribute causes the compiler to use a calling convention that takes care of switching memory banks when entering and leaving a function. This calling convention is also the default when using the @option{-mlong-calls} option. On 68HC12 the compiler will use the @code{call} and @code{rtc} instructions to call and return from a function. On 68HC11 the compiler will generate a sequence of instructions to invoke a board-specific routine to switch the memory bank and call the real function. The board-specific routine simulates a @code{call}. At the end of a function, it will jump to a board-specific routine instead of using @code{rts}. The board-specific return routine simulates the @code{rtc}. @item fastcall @cindex functions that pop the argument stack on the 386 On the Intel 386, the @code{fastcall} attribute causes the compiler to pass the first argument (if of integral type) in the register ECX and the second argument (if of integral type) in the register EDX@. Subsequent and other typed arguments are passed on the stack. The called function will pop the arguments off the stack. If the number of arguments is variable all arguments are pushed on the stack. @item format (@var{archetype}, @var{string-index}, @var{first-to-check}) @cindex @code{format} function attribute @opindex Wformat The @code{format} attribute specifies that a function takes @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style arguments which should be type-checked against a format string. For example, the declaration: @smallexample extern int my_printf (void *my_object, const char *my_format, ...) __attribute__ ((format (printf, 2, 3))); @end smallexample @noindent causes the compiler to check the arguments in calls to @code{my_printf} for consistency with the @code{printf} style format string argument @code{my_format}. The parameter @var{archetype} determines how the format string is interpreted, and should be @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon}. (You can also use @code{__printf__}, @code{__scanf__}, @code{__strftime__} or @code{__strfmon__}.) The parameter @var{string-index} specifies which argument is the format string argument (starting from 1), while @var{first-to-check} is the number of the first argument to check against the format string. For functions where the arguments are not available to be checked (such as @code{vprintf}), specify the third parameter as zero. In this case the compiler only checks the format string for consistency. For @code{strftime} formats, the third parameter is required to be zero. Since non-static C++ methods have an implicit @code{this} argument, the arguments of such methods should be counted from two, not one, when giving values for @var{string-index} and @var{first-to-check}. In the example above, the format string (@code{my_format}) is the second argument of the function @code{my_print}, and the arguments to check start with the third argument, so the correct parameters for the format attribute are 2 and 3. @opindex ffreestanding @opindex fno-builtin The @code{format} attribute allows you to identify your own functions which take format strings as arguments, so that GCC can check the calls to these functions for errors. The compiler always (unless @option{-ffreestanding} or @option{-fno-builtin} is used) checks formats for the standard library functions @code{printf}, @code{fprintf}, @code{sprintf}, @code{scanf}, @code{fscanf}, @code{sscanf}, @code{strftime}, @code{vprintf}, @code{vfprintf} and @code{vsprintf} whenever such warnings are requested (using @option{-Wformat}), so there is no need to modify the header file @file{stdio.h}. In C99 mode, the functions @code{snprintf}, @code{vsnprintf}, @code{vscanf}, @code{vfscanf} and @code{vsscanf} are also checked. Except in strictly conforming C standard modes, the X/Open function @code{strfmon} is also checked as are @code{printf_unlocked} and @code{fprintf_unlocked}. @xref{C Dialect Options,,Options Controlling C Dialect}. The target may provide additional types of format checks. @xref{Target Format Checks,,Format Checks Specific to Particular Target Machines}. @item format_arg (@var{string-index}) @cindex @code{format_arg} function attribute @opindex Wformat-nonliteral The @code{format_arg} attribute specifies that a function takes a format string for a @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style function and modifies it (for example, to translate it into another language), so the result can be passed to a @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style function (with the remaining arguments to the format function the same as they would have been for the unmodified string). For example, the declaration: @smallexample extern char * my_dgettext (char *my_domain, const char *my_format) __attribute__ ((format_arg (2))); @end smallexample @noindent causes the compiler to check the arguments in calls to a @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} type function, whose format string argument is a call to the @code{my_dgettext} function, for consistency with the format string argument @code{my_format}. If the @code{format_arg} attribute had not been specified, all the compiler could tell in such calls to format functions would be that the format string argument is not constant; this would generate a warning when @option{-Wformat-nonliteral} is used, but the calls could not be checked without the attribute. The parameter @var{string-index} specifies which argument is the format string argument (starting from one). Since non-static C++ methods have an implicit @code{this} argument, the arguments of such methods should be counted from two. The @code{format-arg} attribute allows you to identify your own functions which modify format strings, so that GCC can check the calls to @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} type function whose operands are a call to one of your own function. The compiler always treats @code{gettext}, @code{dgettext}, and @code{dcgettext} in this manner except when strict ISO C support is requested by @option{-ansi} or an appropriate @option{-std} option, or @option{-ffreestanding} or @option{-fno-builtin} is used. @xref{C Dialect Options,,Options Controlling C Dialect}. @item function_vector @cindex calling functions through the function vector on the H8/300 processors Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified function should be called through the function vector. Calling a function through the function vector will reduce code size, however; the function vector has a limited size (maximum 128 entries on the H8/300 and 64 entries on the H8/300H and H8S) and shares space with the interrupt vector. You must use GAS and GLD from GNU binutils version 2.7 or later for this attribute to work correctly. @item interrupt @cindex interrupt handler functions Use this attribute on the ARM, AVR, C4x, CRX, M32C, M32R/D, MS1, and Xstormy16 ports to indicate that the specified function is an interrupt handler. The compiler will generate function entry and exit sequences suitable for use in an interrupt handler when this attribute is present. Note, interrupt handlers for the Blackfin, m68k, H8/300, H8/300H, H8S, and SH processors can be specified via the @code{interrupt_handler} attribute. Note, on the AVR, interrupts will be enabled inside the function. Note, for the ARM, you can specify the kind of interrupt to be handled by adding an optional parameter to the interrupt attribute like this: @smallexample void f () __attribute__ ((interrupt ("IRQ"))); @end smallexample Permissible values for this parameter are: IRQ, FIQ, SWI, ABORT and UNDEF@. @item interrupt_handler @cindex interrupt handler functions on the Blackfin, m68k, H8/300 and SH processors Use this attribute on the Blackfin, m68k, H8/300, H8/300H, H8S, and SH to indicate that the specified function is an interrupt handler. The compiler will generate function entry and exit sequences suitable for use in an interrupt handler when this attribute is present. @item kspisusp @cindex User stack pointer in interrupts on the Blackfin When used together with @code{interrupt_handler}, @code{exception_handler} or @code{nmi_handler}, code will be generated to load the stack pointer from the USP register in the function prologue. @item long_call/short_call @cindex indirect calls on ARM This attribute specifies how a particular function is called on ARM@. Both attributes override the @option{-mlong-calls} (@pxref{ARM Options}) command line switch and @code{#pragma long_calls} settings. The @code{long_call} attribute indicates that the function might be far away from the call site and require a different (more expensive) calling sequence. The @code{short_call} attribute always places the offset to the function from the call site into the @samp{BL} instruction directly. @item longcall/shortcall @cindex functions called via pointer on the RS/6000 and PowerPC On the Blackfin, RS/6000 and PowerPC, the @code{longcall} attribute indicates that the function might be far away from the call site and require a different (more expensive) calling sequence. The @code{shortcall} attribute indicates that the function is always close enough for the shorter calling sequence to be used. These attributes override both the @option{-mlongcall} switch and, on the RS/6000 and PowerPC, the @code{#pragma longcall} setting. @xref{RS/6000 and PowerPC Options}, for more information on whether long calls are necessary. @item long_call @cindex indirect calls on MIPS This attribute specifies how a particular function is called on MIPS@. The attribute overrides the @option{-mlong-calls} (@pxref{MIPS Options}) command line switch. This attribute causes the compiler to always call the function by first loading its address into a register, and then using the contents of that register. @item malloc @cindex @code{malloc} attribute The @code{malloc} attribute is used to tell the compiler that a function may be treated as if any non-@code{NULL} pointer it returns cannot alias any other pointer valid when the function returns. This will often improve optimization. Standard functions with this property include @code{malloc} and @code{calloc}. @code{realloc}-like functions have this property as long as the old pointer is never referred to (including comparing it to the new pointer) after the function returns a non-@code{NULL} value. @item model (@var{model-name}) @cindex function addressability on the M32R/D @cindex variable addressability on the IA-64 On the M32R/D, use this attribute to set the addressability of an object, and of the code generated for a function. The identifier @var{model-name} is one of @code{small}, @code{medium}, or @code{large}, representing each of the code models. Small model objects live in the lower 16MB of memory (so that their addresses can be loaded with the @code{ld24} instruction), and are callable with the @code{bl} instruction. Medium model objects may live anywhere in the 32-bit address space (the compiler will generate @code{seth/add3} instructions to load their addresses), and are callable with the @code{bl} instruction. Large model objects may live anywhere in the 32-bit address space (the compiler will generate @code{seth/add3} instructions to load their addresses), and may not be reachable with the @code{bl} instruction (the compiler will generate the much slower @code{seth/add3/jl} instruction sequence). On IA-64, use this attribute to set the addressability of an object. At present, the only supported identifier for @var{model-name} is @code{small}, indicating addressability via ``small'' (22-bit) addresses (so that their addresses can be loaded with the @code{addl} instruction). Caveat: such addressing is by definition not position independent and hence this attribute must not be used for objects defined by shared libraries. @item naked @cindex function without a prologue/epilogue code Use this attribute on the ARM, AVR, C4x and IP2K ports to indicate that the specified function does not need prologue/epilogue sequences generated by the compiler. It is up to the programmer to provide these sequences. @item near @cindex functions which do not handle memory bank switching on 68HC11/68HC12 On 68HC11 and 68HC12 the @code{near} attribute causes the compiler to use the normal calling convention based on @code{jsr} and @code{rts}. This attribute can be used to cancel the effect of the @option{-mlong-calls} option. @item nesting @cindex Allow nesting in an interrupt handler on the Blackfin processor. Use this attribute together with @code{interrupt_handler}, @code{exception_handler} or @code{nmi_handler} to indicate that the function entry code should enable nested interrupts or exceptions. @item nmi_handler @cindex NMI handler functions on the Blackfin processor Use this attribute on the Blackfin to indicate that the specified function is an NMI handler. The compiler will generate function entry and exit sequences suitable for use in an NMI handler when this attribute is present. @item no_instrument_function @cindex @code{no_instrument_function} function attribute @opindex finstrument-functions If @option{-finstrument-functions} is given, profiling function calls will be generated at entry and exit of most user-compiled functions. Functions with this attribute will not be so instrumented. @item noinline @cindex @code{noinline} function attribute This function attribute prevents a function from being considered for inlining. @item nonnull (@var{arg-index}, @dots{}) @cindex @code{nonnull} function attribute The @code{nonnull} attribute specifies that some function parameters should be non-null pointers. For instance, the declaration: @smallexample extern void * my_memcpy (void *dest, const void *src, size_t len) __attribute__((nonnull (1, 2))); @end smallexample @noindent causes the compiler to check that, in calls to @code{my_memcpy}, arguments @var{dest} and @var{src} are non-null. If the compiler determines that a null pointer is passed in an argument slot marked as non-null, and the @option{-Wnonnull} option is enabled, a warning is issued. The compiler may also choose to make optimizations based on the knowledge that certain function arguments will not be null. If no argument index list is given to the @code{nonnull} attribute, all pointer arguments are marked as non-null. To illustrate, the following declaration is equivalent to the previous example: @smallexample extern void * my_memcpy (void *dest, const void *src, size_t len) __attribute__((nonnull)); @end smallexample @item noreturn @cindex @code{noreturn} function attribute A few standard library functions, such as @code{abort} and @code{exit}, cannot return. GCC knows this automatically. Some programs define their own functions that never return. You can declare them @code{noreturn} to tell the compiler this fact. For example, @smallexample @group void fatal () __attribute__ ((noreturn)); void fatal (/* @r{@dots{}} */) @{ /* @r{@dots{}} */ /* @r{Print error message.} */ /* @r{@dots{}} */ exit (1); @} @end group @end smallexample The @code{noreturn} keyword tells the compiler to assume that @code{fatal} cannot return. It can then optimize without regard to what would happen if @code{fatal} ever did return. This makes slightly better code. More importantly, it helps avoid spurious warnings of uninitialized variables. The @code{noreturn} keyword does not affect the exceptional path when that applies: a @code{noreturn}-marked function may still return to the caller by throwing an exception or calling @code{longjmp}. Do not assume that registers saved by the calling function are restored before calling the @code{noreturn} function. It does not make sense for a @code{noreturn} function to have a return type other than @code{void}. The attribute @code{noreturn} is not implemented in GCC versions earlier than 2.5. An alternative way to declare that a function does not return, which works in the current version and in some older versions, is as follows: @smallexample typedef void voidfn (); volatile voidfn fatal; @end smallexample This approach does not work in GNU C++. @item nothrow @cindex @code{nothrow} function attribute The @code{nothrow} attribute is used to inform the compiler that a function cannot throw an exception. For example, most functions in the standard C library can be guaranteed not to throw an exception with the notable exceptions of @code{qsort} and @code{bsearch} that take function pointer arguments. The @code{nothrow} attribute is not implemented in GCC versions earlier than 3.3. @item pure @cindex @code{pure} function attribute Many functions have no effects except the return value and their return value depends only on the parameters and/or global variables. Such a function can be subject to common subexpression elimination and loop optimization just as an arithmetic operator would be. These functions should be declared with the attribute @code{pure}. For example, @smallexample int square (int) __attribute__ ((pure)); @end smallexample @noindent says that the hypothetical function @code{square} is safe to call fewer times than the program says. Some of common examples of pure functions are @code{strlen} or @code{memcmp}. Interesting non-pure functions are functions with infinite loops or those depending on volatile memory or other system resource, that may change between two consecutive calls (such as @code{feof} in a multithreading environment). The attribute @code{pure} is not implemented in GCC versions earlier than 2.96. @item regparm (@var{number}) @cindex @code{regparm} attribute @cindex functions that are passed arguments in registers on the 386 On the Intel 386, the @code{regparm} attribute causes the compiler to pass arguments number one to @var{number} if they are of integral type in registers EAX, EDX, and ECX instead of on the stack. Functions that take a variable number of arguments will continue to be passed all of their arguments on the stack. Beware that on some ELF systems this attribute is unsuitable for global functions in shared libraries with lazy binding (which is the default). Lazy binding will send the first call via resolving code in the loader, which might assume EAX, EDX and ECX can be clobbered, as per the standard calling conventions. Solaris 8 is affected by this. GNU systems with GLIBC 2.1 or higher, and FreeBSD, are believed to be safe since the loaders there save all registers. (Lazy binding can be disabled with the linker or the loader if desired, to avoid the problem.) @item sseregparm @cindex @code{sseregparm} attribute On the Intel 386 with SSE support, the @code{sseregparm} attribute causes the compiler to pass up to 3 floating point arguments in SSE registers instead of on the stack. Functions that take a variable number of arguments will continue to pass all of their floating point arguments on the stack. @item force_align_arg_pointer @cindex @code{force_align_arg_pointer} attribute On the Intel x86, the @code{force_align_arg_pointer} attribute may be applied to individual function definitions, generating an alternate prologue and epilogue that realigns the runtime stack. This supports mixing legacy codes that run with a 4-byte aligned stack with modern codes that keep a 16-byte stack for SSE compatibility. The alternate prologue and epilogue are slower and bigger than the regular ones, and the alternate prologue requires a scratch register; this lowers the number of registers available if used in conjunction with the @code{regparm} attribute. The @code{force_align_arg_pointer} attribute is incompatible with nested functions; this is considered a hard error. @item returns_twice @cindex @code{returns_twice} attribute The @code{returns_twice} attribute tells the compiler that a function may return more than one time. The compiler will ensure that all registers are dead before calling such a function and will emit a warning about the variables that may be clobbered after the second return from the function. Examples of such functions are @code{setjmp} and @code{vfork}. The @code{longjmp}-like counterpart of such function, if any, might need to be marked with the @code{noreturn} attribute. @item saveall @cindex save all registers on the Blackfin, H8/300, H8/300H, and H8S Use this attribute on the Blackfin, H8/300, H8/300H, and H8S to indicate that all registers except the stack pointer should be saved in the prologue regardless of whether they are used or not. @item section ("@var{section-name}") @cindex @code{section} function attribute Normally, the compiler places the code it generates in the @code{text} section. Sometimes, however, you need additional sections, or you need certain particular functions to appear in special sections. The @code{section} attribute specifies that a function lives in a particular section. For example, the declaration: @smallexample extern void foobar (void) __attribute__ ((section ("bar"))); @end smallexample @noindent puts the function @code{foobar} in the @code{bar} section. Some file formats do not support arbitrary sections so the @code{section} attribute is not available on all platforms. If you need to map the entire contents of a module to a particular section, consider using the facilities of the linker instead. @item sentinel @cindex @code{sentinel} function attribute This function attribute ensures that a parameter in a function call is an explicit @code{NULL}. The attribute is only valid on variadic functions. By default, the sentinel is located at position zero, the last parameter of the function call. If an optional integer position argument P is supplied to the attribute, the sentinel must be located at position P counting backwards from the end of the argument list. @smallexample __attribute__ ((sentinel)) is equivalent to __attribute__ ((sentinel(0))) @end smallexample The attribute is automatically set with a position of 0 for the built-in functions @code{execl} and @code{execlp}. The built-in function @code{execle} has the attribute set with a position of 1. A valid @code{NULL} in this context is defined as zero with any pointer type. If your system defines the @code{NULL} macro with an integer type then you need to add an explicit cast. GCC replaces @code{stddef.h} with a copy that redefines NULL appropriately. The warnings for missing or incorrect sentinels are enabled with @option{-Wformat}. @item short_call See long_call/short_call. @item shortcall See longcall/shortcall. @item signal @cindex signal handler functions on the AVR processors Use this attribute on the AVR to indicate that the specified function is a signal handler. The compiler will generate function entry and exit sequences suitable for use in a signal handler when this attribute is present. Interrupts will be disabled inside the function. @item sp_switch Use this attribute on the SH to indicate an @code{interrupt_handler} function should switch to an alternate stack. It expects a string argument that names a global variable holding the address of the alternate stack. @smallexample void *alt_stack; void f () __attribute__ ((interrupt_handler, sp_switch ("alt_stack"))); @end smallexample @item stdcall @cindex functions that pop the argument stack on the 386 On the Intel 386, the @code{stdcall} attribute causes the compiler to assume that the called function will pop off the stack space used to pass arguments, unless it takes a variable number of arguments. @item tiny_data @cindex tiny data section on the H8/300H and H8S Use this attribute on the H8/300H and H8S to indicate that the specified variable should be placed into the tiny data section. The compiler will generate more efficient code for loads and stores on data in the tiny data section. Note the tiny data area is limited to slightly under 32kbytes of data. @item trap_exit Use this attribute on the SH for an @code{interrupt_handler} to return using @code{trapa} instead of @code{rte}. This attribute expects an integer argument specifying the trap number to be used. @item unused @cindex @code{unused} attribute. This attribute, attached to a function, means that the function is meant to be possibly unused. GCC will not produce a warning for this function. @item used @cindex @code{used} attribute. This attribute, attached to a function, means that code must be emitted for the function even if it appears that the function is not referenced. This is useful, for example, when the function is referenced only in inline assembly. @item visibility ("@var{visibility_type}") @cindex @code{visibility} attribute This attribute affects the linkage of the declaration to which it is attached. There are four supported @var{visibility_type} values: default, hidden, protected or internal visibility. @smallexample void __attribute__ ((visibility ("protected"))) f () @{ /* @r{Do something.} */; @} int i __attribute__ ((visibility ("hidden"))); @end smallexample The possible values of @var{visibility_type} correspond to the visibility settings in the ELF gABI. @table @dfn @c keep this list of visibilities in alphabetical order. @item default Default visibility is the normal case for the object file format. This value is available for the visibility attribute to override other options that may change the assumed visibility of entities. On ELF, default visibility means that the declaration is visible to other modules and, in shared libraries, means that the declared entity may be overridden. On Darwin, default visibility means that the declaration is visible to other modules. Default visibility corresponds to ``external linkage'' in the language. @item hidden Hidden visibility indicates that the entity declared will have a new form of linkage, which we'll call ``hidden linkage''. Two declarations of an object with hidden linkage refer to the same object if they are in the same shared object. @item internal Internal visibility is like hidden visibility, but with additional processor specific semantics. Unless otherwise specified by the psABI, GCC defines internal visibility to mean that a function is @emph{never} called from another module. Compare this with hidden functions which, while they cannot be referenced directly by other modules, can be referenced indirectly via function pointers. By indicating that a function cannot be called from outside the module, GCC may for instance omit the load of a PIC register since it is known that the calling function loaded the correct value. @item protected Protected visibility is like default visibility except that it indicates that references within the defining module will bind to the definition in that module. That is, the declared entity cannot be overridden by another module. @end table All visibilities are supported on many, but not all, ELF targets (supported when the assembler supports the @samp{.visibility} pseudo-op). Default visibility is supported everywhere. Hidden visibility is supported on Darwin targets. The visibility attribute should be applied only to declarations which would otherwise have external linkage. The attribute should be applied consistently, so that the same entity should not be declared with different settings of the attribute. In C++, the visibility attribute applies to types as well as functions and objects, because in C++ types have linkage. A class must not have greater visibility than its non-static data member types and bases, and class members default to the visibility of their class. Also, a declaration without explicit visibility is limited to the visibility of its type. In C++, you can mark member functions and static member variables of a class with the visibility attribute. This is useful if if you know a particular method or static member variable should only be used from one shared object; then you can mark it hidden while the rest of the class has default visibility. Care must be taken to avoid breaking the One Definition Rule; for example, it is usually not useful to mark an inline method as hidden without marking the whole class as hidden. A C++ namespace declaration can also have the visibility attribute. This attribute applies only to the particular namespace body, not to other definitions of the same namespace; it is equivalent to using @samp{#pragma GCC visibility} before and after the namespace definition (@pxref{Visibility Pragmas}). In C++, if a template argument has limited visibility, this restriction is implicitly propagated to the template instantiation. Otherwise, template instantiations and specializations default to the visibility of their template. If both the template and enclosing class have explicit visibility, the visibility from the template is used. @item warn_unused_result @cindex @code{warn_unused_result} attribute The @code{warn_unused_result} attribute causes a warning to be emitted if a caller of the function with this attribute does not use its return value. This is useful for functions where not checking the result is either a security problem or always a bug, such as @code{realloc}. @smallexample int fn () __attribute__ ((warn_unused_result)); int foo () @{ if (fn () < 0) return -1; fn (); return 0; @} @end smallexample results in warning on line 5. @item weak @cindex @code{weak} attribute The @code{weak} attribute causes the declaration to be emitted as a weak symbol rather than a global. This is primarily useful in defining library functions which can be overridden in user code, though it can also be used with non-function declarations. Weak symbols are supported for ELF targets, and also for a.out targets when using the GNU assembler and linker. @item weakref @itemx weakref ("@var{target}") @cindex @code{weakref} attribute The @code{weakref} attribute marks a declaration as a weak reference. Without arguments, it should be accompanied by an @code{alias} attribute naming the target symbol. Optionally, the @var{target} may be given as an argument to @code{weakref} itself. In either case, @code{weakref} implicitly marks the declaration as @code{weak}. Without a @var{target}, given as an argument to @code{weakref} or to @code{alias}, @code{weakref} is equivalent to @code{weak}. @smallexample static int x() __attribute__ ((weakref ("y"))); /* is equivalent to... */ static int x() __attribute__ ((weak, weakref, alias ("y"))); /* and to... */ static int x() __attribute__ ((weakref)); static int x() __attribute__ ((alias ("y"))); @end smallexample A weak reference is an alias that does not by itself require a definition to be given for the target symbol. If the target symbol is only referenced through weak references, then the becomes a @code{weak} undefined symbol. If it is directly referenced, however, then such strong references prevail, and a definition will be required for the symbol, not necessarily in the same translation unit. The effect is equivalent to moving all references to the alias to a separate translation unit, renaming the alias to the aliased symbol, declaring it as weak, compiling the two separate translation units and performing a reloadable link on them. At present, a declaration to which @code{weakref} is attached can only be @code{static}. @item externally_visible @cindex @code{externally_visible} attribute. This attribute, attached to a global variable or function nullify effect of @option{-fwhole-program} command line option, so the object remain visible outside the current compilation unit @end table You can specify multiple attributes in a declaration by separating them by commas within the double parentheses or by immediately following an attribute declaration with another attribute declaration. @cindex @code{#pragma}, reason for not using @cindex pragma, reason for not using Some people object to the @code{__attribute__} feature, suggesting that ISO C's @code{#pragma} should be used instead. At the time @code{__attribute__} was designed, there were two reasons for not doing this. @enumerate @item It is impossible to generate @code{#pragma} commands from a macro. @item There is no telling what the same @code{#pragma} might mean in another compiler. @end enumerate These two reasons applied to almost any application that might have been proposed for @code{#pragma}. It was basically a mistake to use @code{#pragma} for @emph{anything}. The ISO C99 standard includes @code{_Pragma}, which now allows pragmas to be generated from macros. In addition, a @code{#pragma GCC} namespace is now in use for GCC-specific pragmas. However, it has been found convenient to use @code{__attribute__} to achieve a natural attachment of attributes to their corresponding declarations, whereas @code{#pragma GCC} is of use for constructs that do not naturally form part of the grammar. @xref{Other Directives,,Miscellaneous Preprocessing Directives, cpp, The GNU C Preprocessor}. @node Attribute Syntax @section Attribute Syntax @cindex attribute syntax This section describes the syntax with which @code{__attribute__} may be used, and the constructs to which attribute specifiers bind, for the C language. Some details may vary for C++. Because of infelicities in the grammar for attributes, some forms described here may not be successfully parsed in all cases. There are some problems with the semantics of attributes in C++. For example, there are no manglings for attributes, although they may affect code generation, so problems may arise when attributed types are used in conjunction with templates or overloading. Similarly, @code{typeid} does not distinguish between types with different attributes. Support for attributes in C++ may be restricted in future to attributes on declarations only, but not on nested declarators. @xref{Function Attributes}, for details of the semantics of attributes applying to functions. @xref{Variable Attributes}, for details of the semantics of attributes applying to variables. @xref{Type Attributes}, for details of the semantics of attributes applying to structure, union and enumerated types. An @dfn{attribute specifier} is of the form @code{__attribute__ ((@var{attribute-list}))}. An @dfn{attribute list} is a possibly empty comma-separated sequence of @dfn{attributes}, where each attribute is one of the following: @itemize @bullet @item Empty. Empty attributes are ignored. @item A word (which may be an identifier such as @code{unused}, or a reserved word such as @code{const}). @item A word, followed by, in parentheses, parameters for the attribute. These parameters take one of the following forms: @itemize @bullet @item An identifier. For example, @code{mode} attributes use this form. @item An identifier followed by a comma and a non-empty comma-separated list of expressions. For example, @code{format} attributes use this form. @item A possibly empty comma-separated list of expressions. For example, @code{format_arg} attributes use this form with the list being a single integer constant expression, and @code{alias} attributes use this form with the list being a single string constant. @end itemize @end itemize An @dfn{attribute specifier list} is a sequence of one or more attribute specifiers, not separated by any other tokens. In GNU C, an attribute specifier list may appear after the colon following a label, other than a @code{case} or @code{default} label. The only attribute it makes sense to use after a label is @code{unused}. This feature is intended for code generated by programs which contains labels that may be unused but which is compiled with @option{-Wall}. It would not normally be appropriate to use in it human-written code, though it could be useful in cases where the code that jumps to the label is contained within an @code{#ifdef} conditional. GNU C++ does not permit such placement of attribute lists, as it is permissible for a declaration, which could begin with an attribute list, to be labelled in C++. Declarations cannot be labelled in C90 or C99, so the ambiguity does not arise there. An attribute specifier list may appear as part of a @code{struct}, @code{union} or @code{enum} specifier. It may go either immediately after the @code{struct}, @code{union} or @code{enum} keyword, or after the closing brace. The former syntax is preferred. Where attribute specifiers follow the closing brace, they are considered to relate to the structure, union or enumerated type defined, not to any enclosing declaration the type specifier appears in, and the type defined is not complete until after the attribute specifiers. @c Otherwise, there would be the following problems: a shift/reduce @c conflict between attributes binding the struct/union/enum and @c binding to the list of specifiers/qualifiers; and "aligned" @c attributes could use sizeof for the structure, but the size could be @c changed later by "packed" attributes. Otherwise, an attribute specifier appears as part of a declaration, counting declarations of unnamed parameters and type names, and relates to that declaration (which may be nested in another declaration, for example in the case of a parameter declaration), or to a particular declarator within a declaration. Where an attribute specifier is applied to a parameter declared as a function or an array, it should apply to the function or array rather than the pointer to which the parameter is implicitly converted, but this is not yet correctly implemented. Any list of specifiers and qualifiers at the start of a declaration may contain attribute specifiers, whether or not such a list may in that context contain storage class specifiers. (Some attributes, however, are essentially in the nature of storage class specifiers, and only make sense where storage class specifiers may be used; for example, @code{section}.) There is one necessary limitation to this syntax: the first old-style parameter declaration in a function definition cannot begin with an attribute specifier, because such an attribute applies to the function instead by syntax described below (which, however, is not yet implemented in this case). In some other cases, attribute specifiers are permitted by this grammar but not yet supported by the compiler. All attribute specifiers in this place relate to the declaration as a whole. In the obsolescent usage where a type of @code{int} is implied by the absence of type specifiers, such a list of specifiers and qualifiers may be an attribute specifier list with no other specifiers or qualifiers. At present, the first parameter in a function prototype must have some type specifier which is not an attribute specifier; this resolves an ambiguity in the interpretation of @code{void f(int (__attribute__((foo)) x))}, but is subject to change. At present, if the parentheses of a function declarator contain only attributes then those attributes are ignored, rather than yielding an error or warning or implying a single parameter of type int, but this is subject to change. An attribute specifier list may appear immediately before a declarator (other than the first) in a comma-separated list of declarators in a declaration of more than one identifier using a single list of specifiers and qualifiers. Such attribute specifiers apply only to the identifier before whose declarator they appear. For example, in @smallexample __attribute__((noreturn)) void d0 (void), __attribute__((format(printf, 1, 2))) d1 (const char *, ...), d2 (void) @end smallexample @noindent the @code{noreturn} attribute applies to all the functions declared; the @code{format} attribute only applies to @code{d1}. An attribute specifier list may appear immediately before the comma, @code{=} or semicolon terminating the declaration of an identifier other than a function definition. At present, such attribute specifiers apply to the declared object or function, but in future they may attach to the outermost adjacent declarator. In simple cases there is no difference, but, for example, in @smallexample void (****f)(void) __attribute__((noreturn)); @end smallexample @noindent at present the @code{noreturn} attribute applies to @code{f}, which causes a warning since @code{f} is not a function, but in future it may apply to the function @code{****f}. The precise semantics of what attributes in such cases will apply to are not yet specified. Where an assembler name for an object or function is specified (@pxref{Asm Labels}), at present the attribute must follow the @code{asm} specification; in future, attributes before the @code{asm} specification may apply to the adjacent declarator, and those after it to the declared object or function. An attribute specifier list may, in future, be permitted to appear after the declarator in a function definition (before any old-style parameter declarations or the function body). Attribute specifiers may be mixed with type qualifiers appearing inside the @code{[]} of a parameter array declarator, in the C99 construct by which such qualifiers are applied to the pointer to which the array is implicitly converted. Such attribute specifiers apply to the pointer, not to the array, but at present this is not implemented and they are ignored. An attribute specifier list may appear at the start of a nested declarator. At present, there are some limitations in this usage: the attributes correctly apply to the declarator, but for most individual attributes the semantics this implies are not implemented. When attribute specifiers follow the @code{*} of a pointer declarator, they may be mixed with any type qualifiers present. The following describes the formal semantics of this syntax. It will make the most sense if you are familiar with the formal specification of declarators in the ISO C standard. Consider (as in C99 subclause 6.7.5 paragraph 4) a declaration @code{T D1}, where @code{T} contains declaration specifiers that specify a type @var{Type} (such as @code{int}) and @code{D1} is a declarator that contains an identifier @var{ident}. The type specified for @var{ident} for derived declarators whose type does not include an attribute specifier is as in the ISO C standard. If @code{D1} has the form @code{( @var{attribute-specifier-list} D )}, and the declaration @code{T D} specifies the type ``@var{derived-declarator-type-list} @var{Type}'' for @var{ident}, then @code{T D1} specifies the type ``@var{derived-declarator-type-list} @var{attribute-specifier-list} @var{Type}'' for @var{ident}. If @code{D1} has the form @code{* @var{type-qualifier-and-attribute-specifier-list} D}, and the declaration @code{T D} specifies the type ``@var{derived-declarator-type-list} @var{Type}'' for @var{ident}, then @code{T D1} specifies the type ``@var{derived-declarator-type-list} @var{type-qualifier-and-attribute-specifier-list} @var{Type}'' for @var{ident}. For example, @smallexample void (__attribute__((noreturn)) ****f) (void); @end smallexample @noindent specifies the type ``pointer to pointer to pointer to pointer to non-returning function returning @code{void}''. As another example, @smallexample char *__attribute__((aligned(8))) *f; @end smallexample @noindent specifies the type ``pointer to 8-byte-aligned pointer to @code{char}''. Note again that this does not work with most attributes; for example, the usage of @samp{aligned} and @samp{noreturn} attributes given above is not yet supported. For compatibility with existing code written for compiler versions that did not implement attributes on nested declarators, some laxity is allowed in the placing of attributes. If an attribute that only applies to types is applied to a declaration, it will be treated as applying to the type of that declaration. If an attribute that only applies to declarations is applied to the type of a declaration, it will be treated as applying to that declaration; and, for compatibility with code placing the attributes immediately before the identifier declared, such an attribute applied to a function return type will be treated as applying to the function type, and such an attribute applied to an array element type will be treated as applying to the array type. If an attribute that only applies to function types is applied to a pointer-to-function type, it will be treated as applying to the pointer target type; if such an attribute is applied to a function return type that is not a pointer-to-function type, it will be treated as applying to the function type. @node Function Prototypes @section Prototypes and Old-Style Function Definitions @cindex function prototype declarations @cindex old-style function definitions @cindex promotion of formal parameters GNU C extends ISO C to allow a function prototype to override a later old-style non-prototype definition. Consider the following example: @smallexample /* @r{Use prototypes unless the compiler is old-fashioned.} */ #ifdef __STDC__ #define P(x) x #else #define P(x) () #endif /* @r{Prototype function declaration.} */ int isroot P((uid_t)); /* @r{Old-style function definition.} */ int isroot (x) /* @r{??? lossage here ???} */ uid_t x; @{ return x == 0; @} @end smallexample Suppose the type @code{uid_t} happens to be @code{short}. ISO C does not allow this example, because subword arguments in old-style non-prototype definitions are promoted. Therefore in this example the function definition's argument is really an @code{int}, which does not match the prototype argument type of @code{short}. This restriction of ISO C makes it hard to write code that is portable to traditional C compilers, because the programmer does not know whether the @code{uid_t} type is @code{short}, @code{int}, or @code{long}. Therefore, in cases like these GNU C allows a prototype to override a later old-style definition. More precisely, in GNU C, a function prototype argument type overrides the argument type specified by a later old-style definition if the former type is the same as the latter type before promotion. Thus in GNU C the above example is equivalent to the following: @smallexample int isroot (uid_t); int isroot (uid_t x) @{ return x == 0; @} @end smallexample @noindent GNU C++ does not support old-style function definitions, so this extension is irrelevant. @node C++ Comments @section C++ Style Comments @cindex // @cindex C++ comments @cindex comments, C++ style In GNU C, you may use C++ style comments, which start with @samp{//} and continue until the end of the line. Many other C implementations allow such comments, and they are included in the 1999 C standard. However, C++ style comments are not recognized if you specify an @option{-std} option specifying a version of ISO C before C99, or @option{-ansi} (equivalent to @option{-std=c89}). @node Dollar Signs @section Dollar Signs in Identifier Names @cindex $ @cindex dollar signs in identifier names @cindex identifier names, dollar signs in In GNU C, you may normally use dollar signs in identifier names. This is because many traditional C implementations allow such identifiers. However, dollar signs in identifiers are not supported on a few target machines, typically because the target assembler does not allow them. @node Character Escapes @section The Character @key{ESC} in Constants You can use the sequence @samp{\e} in a string or character constant to stand for the ASCII character @key{ESC}. @node Alignment @section Inquiring on Alignment of Types or Variables @cindex alignment @cindex type alignment @cindex variable alignment The keyword @code{__alignof__} allows you to inquire about how an object is aligned, or the minimum alignment usually required by a type. Its syntax is just like @code{sizeof}. For example, if the target machine requires a @code{double} value to be aligned on an 8-byte boundary, then @code{__alignof__ (double)} is 8. This is true on many RISC machines. On more traditional machine designs, @code{__alignof__ (double)} is 4 or even 2. Some machines never actually require alignment; they allow reference to any data type even at an odd address. For these machines, @code{__alignof__} reports the @emph{recommended} alignment of a type. If the operand of @code{__alignof__} is an lvalue rather than a type, its value is the required alignment for its type, taking into account any minimum alignment specified with GCC's @code{__attribute__} extension (@pxref{Variable Attributes}). For example, after this declaration: @smallexample struct foo @{ int x; char y; @} foo1; @end smallexample @noindent the value of @code{__alignof__ (foo1.y)} is 1, even though its actual alignment is probably 2 or 4, the same as @code{__alignof__ (int)}. It is an error to ask for the alignment of an incomplete type. @node Variable Attributes @section Specifying Attributes of Variables @cindex attribute of variables @cindex variable attributes The keyword @code{__attribute__} allows you to specify special attributes of variables or structure fields. This keyword is followed by an attribute specification inside double parentheses. Some attributes are currently defined generically for variables. Other attributes are defined for variables on particular target systems. Other attributes are available for functions (@pxref{Function Attributes}) and for types (@pxref{Type Attributes}). Other front ends might define more attributes (@pxref{C++ Extensions,,Extensions to the C++ Language}). You may also specify attributes with @samp{__} preceding and following each keyword. This allows you to use them in header files without being concerned about a possible macro of the same name. For example, you may use @code{__aligned__} instead of @code{aligned}. @xref{Attribute Syntax}, for details of the exact syntax for using attributes. @table @code @cindex @code{aligned} attribute @item aligned (@var{alignment}) This attribute specifies a minimum alignment for the variable or structure field, measured in bytes. For example, the declaration: @smallexample int x __attribute__ ((aligned (16))) = 0; @end smallexample @noindent causes the compiler to allocate the global variable @code{x} on a 16-byte boundary. On a 68040, this could be used in conjunction with an @code{asm} expression to access the @code{move16} instruction which requires 16-byte aligned operands. You can also specify the alignment of structure fields. For example, to create a double-word aligned @code{int} pair, you could write: @smallexample struct foo @{ int x[2] __attribute__ ((aligned (8))); @}; @end smallexample @noindent This is an alternative to creating a union with a @code{double} member that forces the union to be double-word aligned. As in the preceding examples, you can explicitly specify the alignment (in bytes) that you wish the compiler to use for a given variable or structure field. Alternatively, you can leave out the alignment factor and just ask the compiler to align a variable or field to the maximum useful alignment for the target machine you are compiling for. For example, you could write: @smallexample short array[3] __attribute__ ((aligned)); @end smallexample Whenever you leave out the alignment factor in an @code{aligned} attribute specification, the compiler automatically sets the alignment for the declared variable or field to the largest alignment which is ever used for any data type on the target machine you are compiling for. Doing this can often make copy operations more efficient, because the compiler can use whatever instructions copy the biggest chunks of memory when performing copies to or from the variables or fields that you have aligned this way. The @code{aligned} attribute can only increase the alignment; but you can decrease it by specifying @code{packed} as well. See below. Note that the effectiveness of @code{aligned} attributes may be limited by inherent limitations in your linker. On many systems, the linker is only able to arrange for variables to be aligned up to a certain maximum alignment. (For some linkers, the maximum supported alignment may be very very small.) If your linker is only able to align variables up to a maximum of 8 byte alignment, then specifying @code{aligned(16)} in an @code{__attribute__} will still only provide you with 8 byte alignment. See your linker documentation for further information. @item cleanup (@var{cleanup_function}) @cindex @code{cleanup} attribute The @code{cleanup} attribute runs a function when the variable goes out of scope. This attribute can only be applied to auto function scope variables; it may not be applied to parameters or variables with static storage duration. The function must take one parameter, a pointer to a type compatible with the variable. The return value of the function (if any) is ignored. If @option{-fexceptions} is enabled, then @var{cleanup_function} will be run during the stack unwinding that happens during the processing of the exception. Note that the @code{cleanup} attribute does not allow the exception to be caught, only to perform an action. It is undefined what happens if @var{cleanup_function} does not return normally. @item common @itemx nocommon @cindex @code{common} attribute @cindex @code{nocommon} attribute @opindex fcommon @opindex fno-common The @code{common} attribute requests GCC to place a variable in ``common'' storage. The @code{nocommon} attribute requests the opposite---to allocate space for it directly. These attributes override the default chosen by the @option{-fno-common} and @option{-fcommon} flags respectively. @item deprecated @cindex @code{deprecated} attribute The @code{deprecated} attribute results in a warning if the variable is used anywhere in the source file. This is useful when identifying variables that are expected to be removed in a future version of a program. The warning also includes the location of the declaration of the deprecated variable, to enable users to easily find further information about why the variable is deprecated, or what they should do instead. Note that the warning only occurs for uses: @smallexample extern int old_var __attribute__ ((deprecated)); extern int old_var; int new_fn () @{ return old_var; @} @end smallexample results in a warning on line 3 but not line 2. The @code{deprecated} attribute can also be used for functions and types (@pxref{Function Attributes}, @pxref{Type Attributes}.) @item mode (@var{mode}) @cindex @code{mode} attribute This attribute specifies the data type for the declaration---whichever type corresponds to the mode @var{mode}. This in effect lets you request an integer or floating point type according to its width. You may also specify a mode of @samp{byte} or @samp{__byte__} to indicate the mode corresponding to a one-byte integer, @samp{word} or @samp{__word__} for the mode of a one-word integer, and @samp{pointer} or @samp{__pointer__} for the mode used to represent pointers. @item packed @cindex @code{packed} attribute The @code{packed} attribute specifies that a variable or structure field should have the smallest possible alignment---one byte for a variable, and one bit for a field, unless you specify a larger value with the @code{aligned} attribute. Here is a structure in which the field @code{x} is packed, so that it immediately follows @code{a}: @smallexample struct foo @{ char a; int x[2] __attribute__ ((packed)); @}; @end smallexample @item section ("@var{section-name}") @cindex @code{section} variable attribute Normally, the compiler places the objects it generates in sections like @code{data} and @code{bss}. Sometimes, however, you need additional sections, or you need certain particular variables to appear in special sections, for example to map to special hardware. The @code{section} attribute specifies that a variable (or function) lives in a particular section. For example, this small program uses several specific section names: @smallexample struct duart a __attribute__ ((section ("DUART_A"))) = @{ 0 @}; struct duart b __attribute__ ((section ("DUART_B"))) = @{ 0 @}; char stack[10000] __attribute__ ((section ("STACK"))) = @{ 0 @}; int init_data __attribute__ ((section ("INITDATA"))) = 0; main() @{ /* @r{Initialize stack pointer} */ init_sp (stack + sizeof (stack)); /* @r{Initialize initialized data} */ memcpy (&init_data, &data, &edata - &data); /* @r{Turn on the serial ports} */ init_duart (&a); init_duart (&b); @} @end smallexample @noindent Use the @code{section} attribute with an @emph{initialized} definition of a @emph{global} variable, as shown in the example. GCC issues a warning and otherwise ignores the @code{section} attribute in uninitialized variable declarations. You may only use the @code{section} attribute with a fully initialized global definition because of the way linkers work. The linker requires each object be defined once, with the exception that uninitialized variables tentatively go in the @code{common} (or @code{bss}) section and can be multiply ``defined''. You can force a variable to be initialized with the @option{-fno-common} flag or the @code{nocommon} attribute. Some file formats do not support arbitrary sections so the @code{section} attribute is not available on all platforms. If you need to map the entire contents of a module to a particular section, consider using the facilities of the linker instead. @item shared @cindex @code{shared} variable attribute On Microsoft Windows, in addition to putting variable definitions in a named section, the section can also be shared among all running copies of an executable or DLL@. For example, this small program defines shared data by putting it in a named section @code{shared} and marking the section shareable: @smallexample int foo __attribute__((section ("shared"), shared)) = 0; int main() @{ /* @r{Read and write foo. All running copies see the same value.} */ return 0; @} @end smallexample @noindent You may only use the @code{shared} attribute along with @code{section} attribute with a fully initialized global definition because of the way linkers work. See @code{section} attribute for more information. The @code{shared} attribute is only available on Microsoft Windows@. @item tls_model ("@var{tls_model}") @cindex @code{tls_model} attribute The @code{tls_model} attribute sets thread-local storage model (@pxref{Thread-Local}) of a particular @code{__thread} variable, overriding @option{-ftls-model=} command line switch on a per-variable basis. The @var{tls_model} argument should be one of @code{global-dynamic}, @code{local-dynamic}, @code{initial-exec} or @code{local-exec}. Not all targets support this attribute. @item unused This attribute, attached to a variable, means that the variable is meant to be possibly unused. GCC will not produce a warning for this variable. @item used This attribute, attached to a variable, means that the variable must be emitted even if it appears that the variable is not referenced. @item vector_size (@var{bytes}) This attribute specifies the vector size for the variable, measured in bytes. For example, the declaration: @smallexample int foo __attribute__ ((vector_size (16))); @end smallexample @noindent causes the compiler to set the mode for @code{foo}, to be 16 bytes, divided into @code{int} sized units. Assuming a 32-bit int (a vector of 4 units of 4 bytes), the corresponding mode of @code{foo} will be V4SI@. This attribute is only applicable to integral and float scalars, although arrays, pointers, and function return values are allowed in conjunction with this construct. Aggregates with this attribute are invalid, even if they are of the same size as a corresponding scalar. For example, the declaration: @smallexample struct S @{ int a; @}; struct S __attribute__ ((vector_size (16))) foo; @end smallexample @noindent is invalid even if the size of the structure is the same as the size of the @code{int}. @item selectany The @code{selectany} attribute causes an initialized global variable to have link-once semantics. When multiple definitions of the variable are encountered by the linker, the first is selected and the remainder are discarded. Following usage by the Microsoft compiler, the linker is told @emph{not} to warn about size or content differences of the multiple definitions. Although the primary usage of this attribute is for POD types, the attribute can also be applied to global C++ objects that are initialized by a constructor. In this case, the static initialization and destruction code for the object is emitted in each translation defining the object, but the calls to the constructor and destructor are protected by a link-once guard variable. The @code{selectany} attribute is only available on Microsoft Windows targets. You can use @code{__declspec (selectany)} as a synonym for @code{__attribute__ ((selectany))} for compatibility with other compilers. @item weak The @code{weak} attribute is described in @xref{Function Attributes}. @item dllimport The @code{dllimport} attribute is described in @xref{Function Attributes}. @item dllexport The @code{dllexport} attribute is described in @xref{Function Attributes}. @end table @subsection M32R/D Variable Attributes One attribute is currently defined for the M32R/D@. @table @code @item model (@var{model-name}) @cindex variable addressability on the M32R/D Use this attribute on the M32R/D to set the addressability of an object. The identifier @var{model-name} is one of @code{small}, @code{medium}, or @code{large}, representing each of the code models. Small model objects live in the lower 16MB of memory (so that their addresses can be loaded with the @code{ld24} instruction). Medium and large model objects may live anywhere in the 32-bit address space (the compiler will generate @code{seth/add3} instructions to load their addresses). @end table @anchor{i386 Variable Attributes} @subsection i386 Variable Attributes Two attributes are currently defined for i386 configurations: @code{ms_struct} and @code{gcc_struct} @table @code @item ms_struct @itemx gcc_struct @cindex @code{ms_struct} attribute @cindex @code{gcc_struct} attribute If @code{packed} is used on a structure, or if bit-fields are used it may be that the Microsoft ABI packs them differently than GCC would normally pack them. Particularly when moving packed data between functions compiled with GCC and the native Microsoft compiler (either via function call or as data in a file), it may be necessary to access either format. Currently @option{-m[no-]ms-bitfields} is provided for the Microsoft Windows X86 compilers to match the native Microsoft compiler. The Microsoft structure layout algorithm is fairly simple with the exception of the bitfield packing: The padding and alignment of members of structures and whether a bit field can straddle a storage-unit boundary @enumerate @item Structure members are stored sequentially in the order in which they are declared: the first member has the lowest memory address and the last member the highest. @item Every data object has an alignment-requirement. The alignment-requirement for all data except structures, unions, and arrays is either the size of the object or the current packing size (specified with either the aligned attribute or the pack pragma), whichever is less. For structures, unions, and arrays, the alignment-requirement is the largest alignment-requirement of its members. Every object is allocated an offset so that: offset % alignment-requirement == 0 @item Adjacent bit fields are packed into the same 1-, 2-, or 4-byte allocation unit if the integral types are the same size and if the next bit field fits into the current allocation unit without crossing the boundary imposed by the common alignment requirements of the bit fields. @end enumerate Handling of zero-length bitfields: MSVC interprets zero-length bitfields in the following ways: @enumerate @item If a zero-length bitfield is inserted between two bitfields that would normally be coalesced, the bitfields will not be coalesced. For example: @smallexample struct @{ unsigned long bf_1 : 12; unsigned long : 0; unsigned long bf_2 : 12; @} t1; @end smallexample The size of @code{t1} would be 8 bytes with the zero-length bitfield. If the zero-length bitfield were removed, @code{t1}'s size would be 4 bytes. @item If a zero-length bitfield is inserted after a bitfield, @code{foo}, and the alignment of the zero-length bitfield is greater than the member that follows it, @code{bar}, @code{bar} will be aligned as the type of the zero-length bitfield. For example: @smallexample struct @{ char foo : 4; short : 0; char bar; @} t2; struct @{ char foo : 4; short : 0; double bar; @} t3; @end smallexample For @code{t2}, @code{bar} will be placed at offset 2, rather than offset 1. Accordingly, the size of @code{t2} will be 4. For @code{t3}, the zero-length bitfield will not affect the alignment of @code{bar} or, as a result, the size of the structure. Taking this into account, it is important to note the following: @enumerate @item If a zero-length bitfield follows a normal bitfield, the type of the zero-length bitfield may affect the alignment of the structure as whole. For example, @code{t2} has a size of 4 bytes, since the zero-length bitfield follows a normal bitfield, and is of type short. @item Even if a zero-length bitfield is not followed by a normal bitfield, it may still affect the alignment of the structure: @smallexample struct @{ char foo : 6; long : 0; @} t4; @end smallexample Here, @code{t4} will take up 4 bytes. @end enumerate @item Zero-length bitfields following non-bitfield members are ignored: @smallexample struct @{ char foo; long : 0; char bar; @} t5; @end smallexample Here, @code{t5} will take up 2 bytes. @end enumerate @end table @subsection PowerPC Variable Attributes Three attributes currently are defined for PowerPC configurations: @code{altivec}, @code{ms_struct} and @code{gcc_struct}. For full documentation of the struct attributes please see the documentation in the @xref{i386 Variable Attributes}, section. For documentation of @code{altivec} attribute please see the documentation in the @xref{PowerPC Type Attributes}, section. @subsection Xstormy16 Variable Attributes One attribute is currently defined for xstormy16 configurations: @code{below100} @table @code @item below100 @cindex @code{below100} attribute If a variable has the @code{below100} attribute (@code{BELOW100} is allowed also), GCC will place the variable in the first 0x100 bytes of memory and use special opcodes to access it. Such variables will be placed in either the @code{.bss_below100} section or the @code{.data_below100} section. @end table @node Type Attributes @section Specifying Attributes of Types @cindex attribute of types @cindex type attributes The keyword @code{__attribute__} allows you to specify special attributes of @code{struct} and @code{union} types when you define such types. This keyword is followed by an attribute specification inside double parentheses. Seven attributes are currently defined for types: @code{aligned}, @code{packed}, @code{transparent_union}, @code{unused}, @code{deprecated}, @code{visibility}, and @code{may_alias}. Other attributes are defined for functions (@pxref{Function Attributes}) and for variables (@pxref{Variable Attributes}). You may also specify any one of these attributes with @samp{__} preceding and following its keyword. This allows you to use these attributes in header files without being concerned about a possible macro of the same name. For example, you may use @code{__aligned__} instead of @code{aligned}. You may specify type attributes either in a @code{typedef} declaration or in an enum, struct or union type declaration or definition. For an enum, struct or union type, you may specify attributes either between the enum, struct or union tag and the name of the type, or just past the closing curly brace of the @emph{definition}. The former syntax is preferred. @xref{Attribute Syntax}, for details of the exact syntax for using attributes. @table @code @cindex @code{aligned} attribute @item aligned (@var{alignment}) This attribute specifies a minimum alignment (in bytes) for variables of the specified type. For example, the declarations: @smallexample struct S @{ short f[3]; @} __attribute__ ((aligned (8))); typedef int more_aligned_int __attribute__ ((aligned (8))); @end smallexample @noindent force the compiler to insure (as far as it can) that each variable whose type is @code{struct S} or @code{more_aligned_int} will be allocated and aligned @emph{at least} on a 8-byte boundary. On a SPARC, having all variables of type @code{struct S} aligned to 8-byte boundaries allows the compiler to use the @code{ldd} and @code{std} (doubleword load and store) instructions when copying one variable of type @code{struct S} to another, thus improving run-time efficiency. Note that the alignment of any given @code{struct} or @code{union} type is required by the ISO C standard to be at least a perfect multiple of the lowest common multiple of the alignments of all of the members of the @code{struct} or @code{union} in question. This means that you @emph{can} effectively adjust the alignment of a @code{struct} or @code{union} type by attaching an @code{aligned} attribute to any one of the members of such a type, but the notation illustrated in the example above is a more obvious, intuitive, and readable way to request the compiler to adjust the alignment of an entire @code{struct} or @code{union} type. As in the preceding example, you can explicitly specify the alignment (in bytes) that you wish the compiler to use for a given @code{struct} or @code{union} type. Alternatively, you can leave out the alignment factor and just ask the compiler to align a type to the maximum useful alignment for the target machine you are compiling for. For example, you could write: @smallexample struct S @{ short f[3]; @} __attribute__ ((aligned)); @end smallexample Whenever you leave out the alignment factor in an @code{aligned} attribute specification, the compiler automatically sets the alignment for the type to the largest alignment which is ever used for any data type on the target machine you are compiling for. Doing this can often make copy operations more efficient, because the compiler can use whatever instructions copy the biggest chunks of memory when performing copies to or from the variables which have types that you have aligned this way. In the example above, if the size of each @code{short} is 2 bytes, then the size of the entire @code{struct S} type is 6 bytes. The smallest power of two which is greater than or equal to that is 8, so the compiler sets the alignment for the entire @code{struct S} type to 8 bytes. Note that although you can ask the compiler to select a time-efficient alignment for a given type and then declare only individual stand-alone objects of that type, the compiler's ability to select a time-efficient alignment is primarily useful only when you plan to create arrays of variables having the relevant (efficiently aligned) type. If you declare or use arrays of variables of an efficiently-aligned type, then it is likely that your program will also be doing pointer arithmetic (or subscripting, which amounts to the same thing) on pointers to the relevant type, and the code that the compiler generates for these pointer arithmetic operations will often be more efficient for efficiently-aligned types than for other types. The @code{aligned} attribute can only increase the alignment; but you can decrease it by specifying @code{packed} as well. See below. Note that the effectiveness of @code{aligned} attributes may be limited by inherent limitations in your linker. On many systems, the linker is only able to arrange for variables to be aligned up to a certain maximum alignment. (For some linkers, the maximum supported alignment may be very very small.) If your linker is only able to align variables up to a maximum of 8 byte alignment, then specifying @code{aligned(16)} in an @code{__attribute__} will still only provide you with 8 byte alignment. See your linker documentation for further information. @item packed This attribute, attached to @code{struct} or @code{union} type definition, specifies that each member (other than zero-width bitfields) of the structure or union is placed to minimize the memory required. When attached to an @code{enum} definition, it indicates that the smallest integral type should be used. @opindex fshort-enums Specifying this attribute for @code{struct} and @code{union} types is equivalent to specifying the @code{packed} attribute on each of the structure or union members. Specifying the @option{-fshort-enums} flag on the line is equivalent to specifying the @code{packed} attribute on all @code{enum} definitions. In the following example @code{struct my_packed_struct}'s members are packed closely together, but the internal layout of its @code{s} member is not packed---to do that, @code{struct my_unpacked_struct} would need to be packed too. @smallexample struct my_unpacked_struct @{ char c; int i; @}; struct __attribute__ ((__packed__)) my_packed_struct @{ char c; int i; struct my_unpacked_struct s; @}; @end smallexample You may only specify this attribute on the definition of a @code{enum}, @code{struct} or @code{union}, not on a @code{typedef} which does not also define the enumerated type, structure or union. @item transparent_union This attribute, attached to a @code{union} type definition, indicates that any function parameter having that union type causes calls to that function to be treated in a special way. First, the argument corresponding to a transparent union type can be of any type in the union; no cast is required. Also, if the union contains a pointer type, the corresponding argument can be a null pointer constant or a void pointer expression; and if the union contains a void pointer type, the corresponding argument can be any pointer expression. If the union member type is a pointer, qualifiers like @code{const} on the referenced type must be respected, just as with normal pointer conversions. Second, the argument is passed to the function using the calling conventions of the first member of the transparent union, not the calling conventions of the union itself. All members of the union must have the same machine representation; this is necessary for this argument passing to work properly. Transparent unions are designed for library functions that have multiple interfaces for compatibility reasons. For example, suppose the @code{wait} function must accept either a value of type @code{int *} to comply with Posix, or a value of type @code{union wait *} to comply with the 4.1BSD interface. If @code{wait}'s parameter were @code{void *}, @code{wait} would accept both kinds of arguments, but it would also accept any other pointer type and this would make argument type checking less useful. Instead, @code{} might define the interface as follows: @smallexample typedef union @{ int *__ip; union wait *__up; @} wait_status_ptr_t __attribute__ ((__transparent_union__)); pid_t wait (wait_status_ptr_t); @end smallexample This interface allows either @code{int *} or @code{union wait *} arguments to be passed, using the @code{int *} calling convention. The program can call @code{wait} with arguments of either type: @smallexample int w1 () @{ int w; return wait (&w); @} int w2 () @{ union wait w; return wait (&w); @} @end smallexample With this interface, @code{wait}'s implementation might look like this: @smallexample pid_t wait (wait_status_ptr_t p) @{ return waitpid (-1, p.__ip, 0); @} @end smallexample @item unused When attached to a type (including a @code{union} or a @code{struct}), this attribute means that variables of that type are meant to appear possibly unused. GCC will not produce a warning for any variables of that type, even if the variable appears to do nothing. This is often the case with lock or thread classes, which are usually defined and then not referenced, but contain constructors and destructors that have nontrivial bookkeeping functions. @item deprecated The @code{deprecated} attribute results in a warning if the type is used anywhere in the source file. This is useful when identifying types that are expected to be removed in a future version of a program. If possible, the warning also includes the location of the declaration of the deprecated type, to enable users to easily find further information about why the type is deprecated, or what they should do instead. Note that the warnings only occur for uses and then only if the type is being applied to an identifier that itself is not being declared as deprecated. @smallexample typedef int T1 __attribute__ ((deprecated)); T1 x; typedef T1 T2; T2 y; typedef T1 T3 __attribute__ ((deprecated)); T3 z __attribute__ ((deprecated)); @end smallexample results in a warning on line 2 and 3 but not lines 4, 5, or 6. No warning is issued for line 4 because T2 is not explicitly deprecated. Line 5 has no warning because T3 is explicitly deprecated. Similarly for line 6. The @code{deprecated} attribute can also be used for functions and variables (@pxref{Function Attributes}, @pxref{Variable Attributes}.) @item may_alias Accesses to objects with types with this attribute are not subjected to type-based alias analysis, but are instead assumed to be able to alias any other type of objects, just like the @code{char} type. See @option{-fstrict-aliasing} for more information on aliasing issues. Example of use: @smallexample typedef short __attribute__((__may_alias__)) short_a; int main (void) @{ int a = 0x12345678; short_a *b = (short_a *) &a; b[1] = 0; if (a == 0x12345678) abort(); exit(0); @} @end smallexample If you replaced @code{short_a} with @code{short} in the variable declaration, the above program would abort when compiled with @option{-fstrict-aliasing}, which is on by default at @option{-O2} or above in recent GCC versions. @item visibility In C++, attribute visibility (@pxref{Function Attributes}) can also be applied to class, struct, union and enum types. Unlike other type attributes, the attribute must appear between the initial keyword and the name of the type; it cannot appear after the body of the type. Note that the type visibility is applied to vague linkage entities associated with the class (vtable, typeinfo node, etc.). In particular, if a class is thrown as an exception in one shared object and caught in another, the class must have default visibility. Otherwise the two shared objects will be unable to use the same typeinfo node and exception handling will break. @subsection ARM Type Attributes On those ARM targets that support @code{dllimport} (such as Symbian OS), you can use the @code{notshared} attribute to indicate that the virtual table and other similar data for a class should not be exported from a DLL@. For example: @smallexample class __declspec(notshared) C @{ public: __declspec(dllimport) C(); virtual void f(); @} __declspec(dllexport) C::C() @{@} @end smallexample In this code, @code{C::C} is exported from the current DLL, but the virtual table for @code{C} is not exported. (You can use @code{__attribute__} instead of @code{__declspec} if you prefer, but most Symbian OS code uses @code{__declspec}.) @anchor{i386 Type Attributes} @subsection i386 Type Attributes Two attributes are currently defined for i386 configurations: @code{ms_struct} and @code{gcc_struct} @item ms_struct @itemx gcc_struct @cindex @code{ms_struct} @cindex @code{gcc_struct} If @code{packed} is used on a structure, or if bit-fields are used it may be that the Microsoft ABI packs them differently than GCC would normally pack them. Particularly when moving packed data between functions compiled with GCC and the native Microsoft compiler (either via function call or as data in a file), it may be necessary to access either format. Currently @option{-m[no-]ms-bitfields} is provided for the Microsoft Windows X86 compilers to match the native Microsoft compiler. @end table To specify multiple attributes, separate them by commas within the double parentheses: for example, @samp{__attribute__ ((aligned (16), packed))}. @anchor{PowerPC Type Attributes} @subsection PowerPC Type Attributes Three attributes currently are defined for PowerPC configurations: @code{altivec}, @code{ms_struct} and @code{gcc_struct}. For full documentation of the struct attributes please see the documentation in the @xref{i386 Type Attributes}, section. The @code{altivec} attribute allows one to declare AltiVec vector data types supported by the AltiVec Programming Interface Manual. The attribute requires an argument to specify one of three vector types: @code{vector__}, @code{pixel__} (always followed by unsigned short), and @code{bool__} (always followed by unsigned). @smallexample __attribute__((altivec(vector__))) __attribute__((altivec(pixel__))) unsigned short __attribute__((altivec(bool__))) unsigned @end smallexample These attributes mainly are intended to support the @code{__vector}, @code{__pixel}, and @code{__bool} AltiVec keywords. @node Inline @section An Inline Function is As Fast As a Macro @cindex inline functions @cindex integrating function code @cindex open coding @cindex macros, inline alternative By declaring a function inline, you can direct GCC to make calls to that function faster. One way GCC can achieve this is to integrate that function's code into the code for its callers. This makes execution faster by eliminating the function-call overhead; in addition, if any of the actual argument values are constant, their known values may permit simplifications at compile time so that not all of the inline function's code needs to be included. The effect on code size is less predictable; object code may be larger or smaller with function inlining, depending on the particular case. You can also direct GCC to try to integrate all ``simple enough'' functions into their callers with the option @option{-finline-functions}. GCC implements three different semantics of declaring a function inline. One is available with @option{-std=gnu89}, another when @option{-std=c99} or @option{-std=gnu99}, and the third is used when compiling C++. To declare a function inline, use the @code{inline} keyword in its declaration, like this: @smallexample static inline int inc (int *a) @{ (*a)++; @} @end smallexample If you are writing a header file to be included in ISO C89 programs, write @code{__inline__} instead of @code{inline}. @xref{Alternate Keywords}. The three types of inlining behave similarly in two important cases: when the @code{inline} keyword is used on a @code{static} function, like the example above, and when a function is first declared without using the @code{inline} keyword and then is defined with @code{inline}, like this: @smallexample extern int inc (int *a); inline int inc (int *a) @{ (*a)++; @} @end smallexample In both of these common cases, the program behaves the same as if you had not used the @code{inline} keyword, except for its speed. @cindex inline functions, omission of @opindex fkeep-inline-functions When a function is both inline and @code{static}, if all calls to the function are integrated into the caller, and the function's address is never used, then the function's own assembler code is never referenced. In this case, GCC does not actually output assembler code for the function, unless you specify the option @option{-fkeep-inline-functions}. Some calls cannot be integrated for various reasons (in particular, calls that precede the function's definition cannot be integrated, and neither can recursive calls within the definition). If there is a nonintegrated call, then the function is compiled to assembler code as usual. The function must also be compiled as usual if the program refers to its address, because that can't be inlined. @cindex automatic @code{inline} for C++ member fns @cindex @code{inline} automatic for C++ member fns @cindex member fns, automatically @code{inline} @cindex C++ member fns, automatically @code{inline} @opindex fno-default-inline As required by ISO C++, GCC considers member functions defined within the body of a class to be marked inline even if they are not explicitly declared with the @code{inline} keyword. You can override this with @option{-fno-default-inline}; @pxref{C++ Dialect Options,,Options Controlling C++ Dialect}. GCC does not inline any functions when not optimizing unless you specify the @samp{always_inline} attribute for the function, like this: @smallexample /* @r{Prototype.} */ inline void foo (const char) __attribute__((always_inline)); @end smallexample The remainder of this section is specific to GNU C89 inlining. @cindex non-static inline function When an inline function is not @code{static}, then the compiler must assume that there may be calls from other source files; since a global symbol can be defined only once in any program, the function must not be defined in the other source files, so the calls therein cannot be integrated. Therefore, a non-@code{static} inline function is always compiled on its own in the usual fashion. If you specify both @code{inline} and @code{extern} in the function definition, then the definition is used only for inlining. In no case is the function compiled on its own, not even if you refer to its address explicitly. Such an address becomes an external reference, as if you had only declared the function, and had not defined it. This combination of @code{inline} and @code{extern} has almost the effect of a macro. The way to use it is to put a function definition in a header file with these keywords, and put another copy of the definition (lacking @code{inline} and @code{extern}) in a library file. The definition in the header file will cause most calls to the function to be inlined. If any uses of the function remain, they will refer to the single copy in the library. @node Extended Asm @section Assembler Instructions with C Expression Operands @cindex extended @code{asm} @cindex @code{asm} expressions @cindex assembler instructions @cindex registers In an assembler instruction using @code{asm}, you can specify the operands of the instruction using C expressions. This means you need not guess which registers or memory locations will contain the data you want to use. You must specify an assembler instruction template much like what appears in a machine description, plus an operand constraint string for each operand. For example, here is how to use the 68881's @code{fsinx} instruction: @smallexample asm ("fsinx %1,%0" : "=f" (result) : "f" (angle)); @end smallexample @noindent Here @code{angle} is the C expression for the input operand while @code{result} is that of the output operand. Each has @samp{"f"} as its operand constraint, saying that a floating point register is required. The @samp{=} in @samp{=f} indicates that the operand is an output; all output operands' constraints must use @samp{=}. The constraints use the same language used in the machine description (@pxref{Constraints}). Each operand is described by an operand-constraint string followed by the C expression in parentheses. A colon separates the assembler template from the first output operand and another separates the last output operand from the first input, if any. Commas separate the operands within each group. The total number of operands is currently limited to 30; this limitation may be lifted in some future version of GCC@. If there are no output operands but there are input operands, you must place two consecutive colons surrounding the place where the output operands would go. As of GCC version 3.1, it is also possible to specify input and output operands using symbolic names which can be referenced within the assembler code. These names are specified inside square brackets preceding the constraint string, and can be referenced inside the assembler code using @code{%[@var{name}]} instead of a percentage sign followed by the operand number. Using named operands the above example could look like: @smallexample asm ("fsinx %[angle],%[output]" : [output] "=f" (result) : [angle] "f" (angle)); @end smallexample @noindent Note that the symbolic operand names have no relation whatsoever to other C identifiers. You may use any name you like, even those of existing C symbols, but you must ensure that no two operands within the same assembler construct use the same symbolic name. Output operand expressions must be lvalues; the compiler can check this. The input operands need not be lvalues. The compiler cannot check whether the operands have data types that are reasonable for the instruction being executed. It does not parse the assembler instruction template and does not know what it means or even whether it is valid assembler input. The extended @code{asm} feature is most often used for machine instructions the compiler itself does not know exist. If the output expression cannot be directly addressed (for example, it is a bit-field), your constraint must allow a register. In that case, GCC will use the register as the output of the @code{asm}, and then store that register into the output. The ordinary output operands must be write-only; GCC will assume that the values in these operands before the instruction are dead and need not be generated. Extended asm supports input-output or read-write operands. Use the constraint character @samp{+} to indicate such an operand and list it with the output operands. You should only use read-write operands when the constraints for the operand (or the operand in which only some of the bits are to be changed) allow a register. You may, as an alternative, logically split its function into two separate operands, one input operand and one write-only output operand. The connection between them is expressed by constraints which say they need to be in the same location when the instruction executes. You can use the same C expression for both operands, or different expressions. For example, here we write the (fictitious) @samp{combine} instruction with @code{bar} as its read-only source operand and @code{foo} as its read-write destination: @smallexample asm ("combine %2,%0" : "=r" (foo) : "0" (foo), "g" (bar)); @end smallexample @noindent The constraint @samp{"0"} for operand 1 says that it must occupy the same location as operand 0. A number in constraint is allowed only in an input operand and it must refer to an output operand. Only a number in the constraint can guarantee that one operand will be in the same place as another. The mere fact that @code{foo} is the value of both operands is not enough to guarantee that they will be in the same place in the generated assembler code. The following would not work reliably: @smallexample asm ("combine %2,%0" : "=r" (foo) : "r" (foo), "g" (bar)); @end smallexample Various optimizations or reloading could cause operands 0 and 1 to be in different registers; GCC knows no reason not to do so. For example, the compiler might find a copy of the value of @code{foo} in one register and use it for operand 1, but generate the output operand 0 in a different register (copying it afterward to @code{foo}'s own address). Of course, since the register for operand 1 is not even mentioned in the assembler code, the result will not work, but GCC can't tell that. As of GCC version 3.1, one may write @code{[@var{name}]} instead of the operand number for a matching constraint. For example: @smallexample asm ("cmoveq %1,%2,%[result]" : [result] "=r"(result) : "r" (test), "r"(new), "[result]"(old)); @end smallexample Sometimes you need to make an @code{asm} operand be a specific register, but there's no matching constraint letter for that register @emph{by itself}. To force the operand into that register, use a local variable for the operand and specify the register in the variable declaration. @xref{Explicit Reg Vars}. Then for the @code{asm} operand, use any register constraint letter that matches the register: @smallexample register int *p1 asm ("r0") = @dots{}; register int *p2 asm ("r1") = @dots{}; register int *result asm ("r0"); asm ("sysint" : "=r" (result) : "0" (p1), "r" (p2)); @end smallexample @anchor{Example of asm with clobbered asm reg} In the above example, beware that a register that is call-clobbered by the target ABI will be overwritten by any function call in the assignment, including library calls for arithmetic operators. Assuming it is a call-clobbered register, this may happen to @code{r0} above by the assignment to @code{p2}. If you have to use such a register, use temporary variables for expressions between the register assignment and use: @smallexample int t1 = @dots{}; register int *p1 asm ("r0") = @dots{}; register int *p2 asm ("r1") = t1; register int *result asm ("r0"); asm ("sysint" : "=r" (result) : "0" (p1), "r" (p2)); @end smallexample Some instructions clobber specific hard registers. To describe this, write a third colon after the input operands, followed by the names of the clobbered hard registers (given as strings). Here is a realistic example for the VAX: @smallexample asm volatile ("movc3 %0,%1,%2" : /* @r{no outputs} */ : "g" (from), "g" (to), "g" (count) : "r0", "r1", "r2", "r3", "r4", "r5"); @end smallexample You may not write a clobber description in a way that overlaps with an input or output operand. For example, you may not have an operand describing a register class with one member if you mention that register in the clobber list. Variables declared to live in specific registers (@pxref{Explicit Reg Vars}), and used as asm input or output operands must have no part mentioned in the clobber description. There is no way for you to specify that an input operand is modified without also specifying it as an output operand. Note that if all the output operands you specify are for this purpose (and hence unused), you will then also need to specify @code{volatile} for the @code{asm} construct, as described below, to prevent GCC from deleting the @code{asm} statement as unused. If you refer to a particular hardware register from the assembler code, you will probably have to list the register after the third colon to tell the compiler the register's value is modified. In some assemblers, the register names begin with @samp{%}; to produce one @samp{%} in the assembler code, you must write @samp{%%} in the input. If your assembler instruction can alter the condition code register, add @samp{cc} to the list of clobbered registers. GCC on some machines represents the condition codes as a specific hardware register; @samp{cc} serves to name this register. On other machines, the condition code is handled differently, and specifying @samp{cc} has no effect. But it is valid no matter what the machine. If your assembler instructions access memory in an unpredictable fashion, add @samp{memory} to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. You will also want to add the @code{volatile} keyword if the memory affected is not listed in the inputs or outputs of the @code{asm}, as the @samp{memory} clobber does not count as a side-effect of the @code{asm}. If you know how large the accessed memory is, you can add it as input or output but if this is not known, you should add @samp{memory}. As an example, if you access ten bytes of a string, you can use a memory input like: @smallexample @{"m"( (@{ struct @{ char x[10]; @} *p = (void *)ptr ; *p; @}) )@}. @end smallexample Note that in the following example the memory input is necessary, otherwise GCC might optimize the store to @code{x} away: @smallexample int foo () @{ int x = 42; int *y = &x; int result; asm ("magic stuff accessing an 'int' pointed to by '%1'" "=&d" (r) : "a" (y), "m" (*y)); return result; @} @end smallexample You can put multiple assembler instructions together in a single @code{asm} template, separated by the characters normally used in assembly code for the system. A combination that works in most places is a newline to break the line, plus a tab character to move to the instruction field (written as @samp{\n\t}). Sometimes semicolons can be used, if the assembler allows semicolons as a line-breaking character. Note that some assembler dialects use semicolons to start a comment. The input operands are guaranteed not to use any of the clobbered registers, and neither will the output operands' addresses, so you can read and write the clobbered registers as many times as you like. Here is an example of multiple instructions in a template; it assumes the subroutine @code{_foo} accepts arguments in registers 9 and 10: @smallexample asm ("movl %0,r9\n\tmovl %1,r10\n\tcall _foo" : /* no outputs */ : "g" (from), "g" (to) : "r9", "r10"); @end smallexample Unless an output operand has the @samp{&} constraint modifier, GCC may allocate it in the same register as an unrelated input operand, on the assumption the inputs are consumed before the outputs are produced. This assumption may be false if the assembler code actually consists of more than one instruction. In such a case, use @samp{&} for each output operand that may not overlap an input. @xref{Modifiers}. If you want to test the condition code produced by an assembler instruction, you must include a branch and a label in the @code{asm} construct, as follows: @smallexample asm ("clr %0\n\tfrob %1\n\tbeq 0f\n\tmov #1,%0\n0:" : "g" (result) : "g" (input)); @end smallexample @noindent This assumes your assembler supports local labels, as the GNU assembler and most Unix assemblers do. Speaking of labels, jumps from one @code{asm} to another are not supported. The compiler's optimizers do not know about these jumps, and therefore they cannot take account of them when deciding how to optimize. @cindex macros containing @code{asm} Usually the most convenient way to use these @code{asm} instructions is to encapsulate them in macros that look like functions. For example, @smallexample #define sin(x) \ (@{ double __value, __arg = (x); \ asm ("fsinx %1,%0": "=f" (__value): "f" (__arg)); \ __value; @}) @end smallexample @noindent Here the variable @code{__arg} is used to make sure that the instruction operates on a proper @code{double} value, and to accept only those arguments @code{x} which can convert automatically to a @code{double}. Another way to make sure the instruction operates on the correct data type is to use a cast in the @code{asm}. This is different from using a variable @code{__arg} in that it converts more different types. For example, if the desired type were @code{int}, casting the argument to @code{int} would accept a pointer with no complaint, while assigning the argument to an @code{int} variable named @code{__arg} would warn about using a pointer unless the caller explicitly casts it. If an @code{asm} has output operands, GCC assumes for optimization purposes the instruction has no side effects except to change the output operands. This does not mean instructions with a side effect cannot be used, but you must be careful, because the compiler may eliminate them if the output operands aren't used, or move them out of loops, or replace two with one if they constitute a common subexpression. Also, if your instruction does have a side effect on a variable that otherwise appears not to change, the old value of the variable may be reused later if it happens to be found in a register. You can prevent an @code{asm} instruction from being deleted by writing the keyword @code{volatile} after the @code{asm}. For example: @smallexample #define get_and_set_priority(new) \ (@{ int __old; \ asm volatile ("get_and_set_priority %0, %1" \ : "=g" (__old) : "g" (new)); \ __old; @}) @end smallexample @noindent The @code{volatile} keyword indicates that the instruction has important side-effects. GCC will not delete a volatile @code{asm} if it is reachable. (The instruction can still be deleted if GCC can prove that control-flow will never reach the location of the instruction.) Note that even a volatile @code{asm} instruction can be moved relative to other code, including across jump instructions. For example, on many targets there is a system register which can be set to control the rounding mode of floating point operations. You might try setting it with a volatile @code{asm}, like this PowerPC example: @smallexample asm volatile("mtfsf 255,%0" : : "f" (fpenv)); sum = x + y; @end smallexample @noindent This will not work reliably, as the compiler may move the addition back before the volatile @code{asm}. To make it work you need to add an artificial dependency to the @code{asm} referencing a variable in the code you don't want moved, for example: @smallexample asm volatile ("mtfsf 255,%1" : "=X"(sum): "f"(fpenv)); sum = x + y; @end smallexample Similarly, you can't expect a sequence of volatile @code{asm} instructions to remain perfectly consecutive. If you want consecutive output, use a single @code{asm}. Also, GCC will perform some optimizations across a volatile @code{asm} instruction; GCC does not ``forget everything'' when it encounters a volatile @code{asm} instruction the way some other compilers do. An @code{asm} instruction without any output operands will be treated identically to a volatile @code{asm} instruction. It is a natural idea to look for a way to give access to the condition code left by the assembler instruction. However, when we attempted to implement this, we found no way to make it work reliably. The problem is that output operands might need reloading, which would result in additional following ``store'' instructions. On most machines, these instructions would alter the condition code before there was time to test it. This problem doesn't arise for ordinary ``test'' and ``compare'' instructions because they don't have any output operands. For reasons similar to those described above, it is not possible to give an assembler instruction access to the condition code left by previous instructions. If you are writing a header file that should be includable in ISO C programs, write @code{__asm__} instead of @code{asm}. @xref{Alternate Keywords}. @subsection Size of an @code{asm} Some targets require that GCC track the size of each instruction used in order to generate correct code. Because the final length of an @code{asm} is only known by the assembler, GCC must make an estimate as to how big it will be. The estimate is formed by counting the number of statements in the pattern of the @code{asm} and multiplying that by the length of the longest instruction on that processor. Statements in the @code{asm} are identified by newline characters and whatever statement separator characters are supported by the assembler; on most processors this is the `@code{;}' character. Normally, GCC's estimate is perfectly adequate to ensure that correct code is generated, but it is possible to confuse the compiler if you use pseudo instructions or assembler macros that expand into multiple real instructions or if you use assembler directives that expand to more space in the object file than would be needed for a single instruction. If this happens then the assembler will produce a diagnostic saying that a label is unreachable. @subsection i386 floating point asm operands There are several rules on the usage of stack-like regs in asm_operands insns. These rules apply only to the operands that are stack-like regs: @enumerate @item Given a set of input regs that die in an asm_operands, it is necessary to know which are implicitly popped by the asm, and which must be explicitly popped by gcc. An input reg that is implicitly popped by the asm must be explicitly clobbered, unless it is constrained to match an output operand. @item For any input reg that is implicitly popped by an asm, it is necessary to know how to adjust the stack to compensate for the pop. If any non-popped input is closer to the top of the reg-stack than the implicitly popped reg, it would not be possible to know what the stack looked like---it's not clear how the rest of the stack ``slides up''. All implicitly popped input regs must be closer to the top of the reg-stack than any input that is not implicitly popped. It is possible that if an input dies in an insn, reload might use the input reg for an output reload. Consider this example: @smallexample asm ("foo" : "=t" (a) : "f" (b)); @end smallexample This asm says that input B is not popped by the asm, and that the asm pushes a result onto the reg-stack, i.e., the stack is one deeper after the asm than it was before. But, it is possible that reload will think that it can use the same reg for both the input and the output, if input B dies in this insn. If any input operand uses the @code{f} constraint, all output reg constraints must use the @code{&} earlyclobber. The asm above would be written as @smallexample asm ("foo" : "=&t" (a) : "f" (b)); @end smallexample @item Some operands need to be in particular places on the stack. All output operands fall in this category---there is no other way to know which regs the outputs appear in unless the user indicates this in the constraints. Output operands must specifically indicate which reg an output appears in after an asm. @code{=f} is not allowed: the operand constraints must select a class with a single reg. @item Output operands may not be ``inserted'' between existing stack regs. Since no 387 opcode uses a read/write operand, all output operands are dead before the asm_operands, and are pushed by the asm_operands. It makes no sense to push anywhere but the top of the reg-stack. Output operands must start at the top of the reg-stack: output operands may not ``skip'' a reg. @item Some asm statements may need extra stack space for internal calculations. This can be guaranteed by clobbering stack registers unrelated to the inputs and outputs. @end enumerate Here are a couple of reasonable asms to want to write. This asm takes one input, which is internally popped, and produces two outputs. @smallexample asm ("fsincos" : "=t" (cos), "=u" (sin) : "0" (inp)); @end smallexample This asm takes two inputs, which are popped by the @code{fyl2xp1} opcode, and replaces them with one output. The user must code the @code{st(1)} clobber for reg-stack.c to know that @code{fyl2xp1} pops both inputs. @smallexample asm ("fyl2xp1" : "=t" (result) : "0" (x), "u" (y) : "st(1)"); @end smallexample @include md.texi @node Asm Labels @section Controlling Names Used in Assembler Code @cindex assembler names for identifiers @cindex names used in assembler code @cindex identifiers, names in assembler code You can specify the name to be used in the assembler code for a C function or variable by writing the @code{asm} (or @code{__asm__}) keyword after the declarator as follows: @smallexample int foo asm ("myfoo") = 2; @end smallexample @noindent This specifies that the name to be used for the variable @code{foo} in the assembler code should be @samp{myfoo} rather than the usual @samp{_foo}. On systems where an underscore is normally prepended to the name of a C function or variable, this feature allows you to define names for the linker that do not start with an underscore. It does not make sense to use this feature with a non-static local variable since such variables do not have assembler names. If you are trying to put the variable in a particular register, see @ref{Explicit Reg Vars}. GCC presently accepts such code with a warning, but will probably be changed to issue an error, rather than a warning, in the future. You cannot use @code{asm} in this way in a function @emph{definition}; but you can get the same effect by writing a declaration for the function before its definition and putting @code{asm} there, like this: @smallexample extern func () asm ("FUNC"); func (x, y) int x, y; /* @r{@dots{}} */ @end smallexample It is up to you to make sure that the assembler names you choose do not conflict with any other assembler symbols. Also, you must not use a register name; that would produce completely invalid assembler code. GCC does not as yet have the ability to store static variables in registers. Perhaps that will be added. @node Explicit Reg Vars @section Variables in Specified Registers @cindex explicit register variables @cindex variables in specified registers @cindex specified registers @cindex registers, global allocation GNU C allows you to put a few global variables into specified hardware registers. You can also specify the register in which an ordinary register variable should be allocated. @itemize @bullet @item Global register variables reserve registers throughout the program. This may be useful in programs such as programming language interpreters which have a couple of global variables that are accessed very often. @item Local register variables in specific registers do not reserve the registers, except at the point where they are used as input or output operands in an @code{asm} statement and the @code{asm} statement itself is not deleted. The compiler's data flow analysis is capable of determining where the specified registers contain live values, and where they are available for other uses. Stores into local register variables may be deleted when they appear to be dead according to dataflow analysis. References to local register variables may be deleted or moved or simplified. These local variables are sometimes convenient for use with the extended @code{asm} feature (@pxref{Extended Asm}), if you want to write one output of the assembler instruction directly into a particular register. (This will work provided the register you specify fits the constraints specified for that operand in the @code{asm}.) @end itemize @menu * Global Reg Vars:: * Local Reg Vars:: @end menu @node Global Reg Vars @subsection Defining Global Register Variables @cindex global register variables @cindex registers, global variables in You can define a global register variable in GNU C like this: @smallexample register int *foo asm ("a5"); @end smallexample @noindent Here @code{a5} is the name of the register which should be used. Choose a register which is normally saved and restored by function calls on your machine, so that library routines will not clobber it. Naturally the register name is cpu-dependent, so you would need to conditionalize your program according to cpu type. The register @code{a5} would be a good choice on a 68000 for a variable of pointer type. On machines with register windows, be sure to choose a ``global'' register that is not affected magically by the function call mechanism. In addition, operating systems on one type of cpu may differ in how they name the registers; then you would need additional conditionals. For example, some 68000 operating systems call this register @code{%a5}. Eventually there may be a way of asking the compiler to choose a register automatically, but first we need to figure out how it should choose and how to enable you to guide the choice. No solution is evident. Defining a global register variable in a certain register reserves that register entirely for this use, at least within the current compilation. The register will not be allocated for any other purpose in the functions in the current compilation. The register will not be saved and restored by these functions. Stores into this register are never deleted even if they would appear to be dead, but references may be deleted or moved or simplified. It is not safe to access the global register variables from signal handlers, or from more than one thread of control, because the system library routines may temporarily use the register for other things (unless you recompile them specially for the task at hand). @cindex @code{qsort}, and global register variables It is not safe for one function that uses a global register variable to call another such function @code{foo} by way of a third function @code{lose} that was compiled without knowledge of this variable (i.e.@: in a different source file in which the variable wasn't declared). This is because @code{lose} might save the register and put some other value there. For example, you can't expect a global register variable to be available in the comparison-function that you pass to @code{qsort}, since @code{qsort} might have put something else in that register. (If you are prepared to recompile @code{qsort} with the same global register variable, you can solve this problem.) If you want to recompile @code{qsort} or other source files which do not actually use your global register variable, so that they will not use that register for any other purpose, then it suffices to specify the compiler option @option{-ffixed-@var{reg}}. You need not actually add a global register declaration to their source code. A function which can alter the value of a global register variable cannot safely be called from a function compiled without this variable, because it could clobber the value the caller expects to find there on return. Therefore, the function which is the entry point into the part of the program that uses the global register variable must explicitly save and restore the value which belongs to its caller. @cindex register variable after @code{longjmp} @cindex global register after @code{longjmp} @cindex value after @code{longjmp} @findex longjmp @findex setjmp On most machines, @code{longjmp} will restore to each global register variable the value it had at the time of the @code{setjmp}. On some machines, however, @code{longjmp} will not change the value of global register variables. To be portable, the function that called @code{setjmp} should make other arrangements to save the values of the global register variables, and to restore them in a @code{longjmp}. This way, the same thing will happen regardless of what @code{longjmp} does. All global register variable declarations must precede all function definitions. If such a declaration could appear after function definitions, the declaration would be too late to prevent the register from being used for other purposes in the preceding functions. Global register variables may not have initial values, because an executable file has no means to supply initial contents for a register. On the SPARC, there are reports that g3 @dots{} g7 are suitable registers, but certain library functions, such as @code{getwd}, as well as the subroutines for division and remainder, modify g3 and g4. g1 and g2 are local temporaries. On the 68000, a2 @dots{} a5 should be suitable, as should d2 @dots{} d7. Of course, it will not do to use more than a few of those. @node Local Reg Vars @subsection Specifying Registers for Local Variables @cindex local variables, specifying registers @cindex specifying registers for local variables @cindex registers for local variables You can define a local register variable with a specified register like this: @smallexample register int *foo asm ("a5"); @end smallexample @noindent Here @code{a5} is the name of the register which should be used. Note that this is the same syntax used for defining global register variables, but for a local variable it would appear within a function. Naturally the register name is cpu-dependent, but this is not a problem, since specific registers are most often useful with explicit assembler instructions (@pxref{Extended Asm}). Both of these things generally require that you conditionalize your program according to cpu type. In addition, operating systems on one type of cpu may differ in how they name the registers; then you would need additional conditionals. For example, some 68000 operating systems call this register @code{%a5}. Defining such a register variable does not reserve the register; it remains available for other uses in places where flow control determines the variable's value is not live. This option does not guarantee that GCC will generate code that has this variable in the register you specify at all times. You may not code an explicit reference to this register in the @emph{assembler instruction template} part of an @code{asm} statement and assume it will always refer to this variable. However, using the variable as an @code{asm} @emph{operand} guarantees that the specified register is used for the operand. Stores into local register variables may be deleted when they appear to be dead according to dataflow analysis. References to local register variables may be deleted or moved or simplified. As for global register variables, it's recommended that you choose a register which is normally saved and restored by function calls on your machine, so that library routines will not clobber it. A common pitfall is to initialize multiple call-clobbered registers with arbitrary expressions, where a function call or library call for an arithmetic operator will overwrite a register value from a previous assignment, for example @code{r0} below: @smallexample register int *p1 asm ("r0") = @dots{}; register int *p2 asm ("r1") = @dots{}; @end smallexample In those cases, a solution is to use a temporary variable for each arbitrary expression. @xref{Example of asm with clobbered asm reg}. @node Alternate Keywords @section Alternate Keywords @cindex alternate keywords @cindex keywords, alternate @option{-ansi} and the various @option{-std} options disable certain keywords. This causes trouble when you want to use GNU C extensions, or a general-purpose header file that should be usable by all programs, including ISO C programs. The keywords @code{asm}, @code{typeof} and @code{inline} are not available in programs compiled with @option{-ansi} or @option{-std} (although @code{inline} can be used in a program compiled with @option{-std=c99}). The ISO C99 keyword @code{restrict} is only available when @option{-std=gnu99} (which will eventually be the default) or @option{-std=c99} (or the equivalent @option{-std=iso9899:1999}) is used. The way to solve these problems is to put @samp{__} at the beginning and end of each problematical keyword. For example, use @code{__asm__} instead of @code{asm}, and @code{__inline__} instead of @code{inline}. Other C compilers won't accept these alternative keywords; if you want to compile with another compiler, you can define the alternate keywords as macros to replace them with the customary keywords. It looks like this: @smallexample #ifndef __GNUC__ #define __asm__ asm #endif @end smallexample @findex __extension__ @opindex pedantic @option{-pedantic} and other options cause warnings for many GNU C extensions. You can prevent such warnings within one expression by writing @code{__extension__} before the expression. @code{__extension__} has no effect aside from this. @node Incomplete Enums @section Incomplete @code{enum} Types You can define an @code{enum} tag without specifying its possible values. This results in an incomplete type, much like what you get if you write @code{struct foo} without describing the elements. A later declaration which does specify the possible values completes the type. You can't allocate variables or storage using the type while it is incomplete. However, you can work with pointers to that type. This extension may not be very useful, but it makes the handling of @code{enum} more consistent with the way @code{struct} and @code{union} are handled. This extension is not supported by GNU C++. @node Function Names @section Function Names as Strings @cindex @code{__func__} identifier @cindex @code{__FUNCTION__} identifier @cindex @code{__PRETTY_FUNCTION__} identifier GCC provides three magic variables which hold the name of the current function, as a string. The first of these is @code{__func__}, which is part of the C99 standard: @display The identifier @code{__func__} is implicitly declared by the translator as if, immediately following the opening brace of each function definition, the declaration @smallexample static const char __func__[] = "function-name"; @end smallexample appeared, where function-name is the name of the lexically-enclosing function. This name is the unadorned name of the function. @end display @code{__FUNCTION__} is another name for @code{__func__}. Older versions of GCC recognize only this name. However, it is not standardized. For maximum portability, we recommend you use @code{__func__}, but provide a fallback definition with the preprocessor: @smallexample #if __STDC_VERSION__ < 199901L # if __GNUC__ >= 2 # define __func__ __FUNCTION__ # else # define __func__ "" # endif #endif @end smallexample In C, @code{__PRETTY_FUNCTION__} is yet another name for @code{__func__}. However, in C++, @code{__PRETTY_FUNCTION__} contains the type signature of the function as well as its bare name. For example, this program: @smallexample extern "C" @{ extern int printf (char *, ...); @} class a @{ public: void sub (int i) @{ printf ("__FUNCTION__ = %s\n", __FUNCTION__); printf ("__PRETTY_FUNCTION__ = %s\n", __PRETTY_FUNCTION__); @} @}; int main (void) @{ a ax; ax.sub (0); return 0; @} @end smallexample @noindent gives this output: @smallexample __FUNCTION__ = sub __PRETTY_FUNCTION__ = void a::sub(int) @end smallexample These identifiers are not preprocessor macros. In GCC 3.3 and earlier, in C only, @code{__FUNCTION__} and @code{__PRETTY_FUNCTION__} were treated as string literals; they could be used to initialize @code{char} arrays, and they could be concatenated with other string literals. GCC 3.4 and later treat them as variables, like @code{__func__}. In C++, @code{__FUNCTION__} and @code{__PRETTY_FUNCTION__} have always been variables. @node Return Address @section Getting the Return or Frame Address of a Function These functions may be used to get information about the callers of a function. @deftypefn {Built-in Function} {void *} __builtin_return_address (unsigned int @var{level}) This function returns the return address of the current function, or of one of its callers. The @var{level} argument is number of frames to scan up the call stack. A value of @code{0} yields the return address of the current function, a value of @code{1} yields the return address of the caller of the current function, and so forth. When inlining the expected behavior is that the function will return the address of the function that will be returned to. To work around this behavior use the @code{noinline} function attribute. The @var{level} argument must be a constant integer. On some machines it may be impossible to determine the return address of any function other than the current one; in such cases, or when the top of the stack has been reached, this function will return @code{0} or a random value. In addition, @code{__builtin_frame_address} may be used to determine if the top of the stack has been reached. This function should only be used with a nonzero argument for debugging purposes. @end deftypefn @deftypefn {Built-in Function} {void *} __builtin_frame_address (unsigned int @var{level}) This function is similar to @code{__builtin_return_address}, but it returns the address of the function frame rather than the return address of the function. Calling @code{__builtin_frame_address} with a value of @code{0} yields the frame address of the current function, a value of @code{1} yields the frame address of the caller of the current function, and so forth. The frame is the area on the stack which holds local variables and saved registers. The frame address is normally the address of the first word pushed on to the stack by the function. However, the exact definition depends upon the processor and the calling convention. If the processor has a dedicated frame pointer register, and the function has a frame, then @code{__builtin_frame_address} will return the value of the frame pointer register. On some machines it may be impossible to determine the frame address of any function other than the current one; in such cases, or when the top of the stack has been reached, this function will return @code{0} if the first frame pointer is properly initialized by the startup code. This function should only be used with a nonzero argument for debugging purposes. @end deftypefn @node Vector Extensions @section Using vector instructions through built-in functions On some targets, the instruction set contains SIMD vector instructions that operate on multiple values contained in one large register at the same time. For example, on the i386 the MMX, 3Dnow! and SSE extensions can be used this way. The first step in using these extensions is to provide the necessary data types. This should be done using an appropriate @code{typedef}: @smallexample typedef int v4si __attribute__ ((vector_size (16))); @end smallexample The @code{int} type specifies the base type, while the attribute specifies the vector size for the variable, measured in bytes. For example, the declaration above causes the compiler to set the mode for the @code{v4si} type to be 16 bytes wide and divided into @code{int} sized units. For a 32-bit @code{int} this means a vector of 4 units of 4 bytes, and the corresponding mode of @code{foo} will be @acronym{V4SI}. The @code{vector_size} attribute is only applicable to integral and float scalars, although arrays, pointers, and function return values are allowed in conjunction with this construct. All the basic integer types can be used as base types, both as signed and as unsigned: @code{char}, @code{short}, @code{int}, @code{long}, @code{long long}. In addition, @code{float} and @code{double} can be used to build floating-point vector types. Specifying a combination that is not valid for the current architecture will cause GCC to synthesize the instructions using a narrower mode. For example, if you specify a variable of type @code{V4SI} and your architecture does not allow for this specific SIMD type, GCC will produce code that uses 4 @code{SIs}. The types defined in this manner can be used with a subset of normal C operations. Currently, GCC will allow using the following operators on these types: @code{+, -, *, /, unary minus, ^, |, &, ~}@. The operations behave like C++ @code{valarrays}. Addition is defined as the addition of the corresponding elements of the operands. For example, in the code below, each of the 4 elements in @var{a} will be added to the corresponding 4 elements in @var{b} and the resulting vector will be stored in @var{c}. @smallexample typedef int v4si __attribute__ ((vector_size (16))); v4si a, b, c; c = a + b; @end smallexample Subtraction, multiplication, division, and the logical operations operate in a similar manner. Likewise, the result of using the unary minus or complement operators on a vector type is a vector whose elements are the negative or complemented values of the corresponding elements in the operand. You can declare variables and use them in function calls and returns, as well as in assignments and some casts. You can specify a vector type as a return type for a function. Vector types can also be used as function arguments. It is possible to cast from one vector type to another, provided they are of the same size (in fact, you can also cast vectors to and from other datatypes of the same size). You cannot operate between vectors of different lengths or different signedness without a cast. A port that supports hardware vector operations, usually provides a set of built-in functions that can be used to operate on vectors. For example, a function to add two vectors and multiply the result by a third could look like this: @smallexample v4si f (v4si a, v4si b, v4si c) @{ v4si tmp = __builtin_addv4si (a, b); return __builtin_mulv4si (tmp, c); @} @end smallexample @node Offsetof @section Offsetof @findex __builtin_offsetof GCC implements for both C and C++ a syntactic extension to implement the @code{offsetof} macro. @smallexample primary: "__builtin_offsetof" "(" @code{typename} "," offsetof_member_designator ")" offsetof_member_designator: @code{identifier} | offsetof_member_designator "." @code{identifier} | offsetof_member_designator "[" @code{expr} "]" @end smallexample This extension is sufficient such that @smallexample #define offsetof(@var{type}, @var{member}) __builtin_offsetof (@var{type}, @var{member}) @end smallexample is a suitable definition of the @code{offsetof} macro. In C++, @var{type} may be dependent. In either case, @var{member} may consist of a single identifier, or a sequence of member accesses and array references. @node Atomic Builtins @section Built-in functions for atomic memory access The following builtins are intended to be compatible with those described in the @cite{Intel Itanium Processor-specific Application Binary Interface}, section 7.4. As such, they depart from the normal GCC practice of using the ``__builtin_'' prefix, and further that they are overloaded such that they work on multiple types. The definition given in the Intel documentation allows only for the use of the types @code{int}, @code{long}, @code{long long} as well as their unsigned counterparts. GCC will allow any integral scalar or pointer type that is 1, 2, 4 or 8 bytes in length. Not all operations are supported by all target processors. If a particular operation cannot be implemented on the target processor, a warning will be generated and a call an external function will be generated. The external function will carry the same name as the builtin, with an additional suffix @samp{_@var{n}} where @var{n} is the size of the data type. @c ??? Should we have a mechanism to suppress this warning? This is almost @c useful for implementing the operation under the control of an external @c mutex. In most cases, these builtins are considered a @dfn{full barrier}. That is, no memory operand will be moved across the operation, either forward or backward. Further, instructions will be issued as necessary to prevent the processor from speculating loads across the operation and from queuing stores after the operation. All of the routines are are described in the Intel documentation to take ``an optional list of variables protected by the memory barrier''. It's not clear what is meant by that; it could mean that @emph{only} the following variables are protected, or it could mean that these variables should in addition be protected. At present GCC ignores this list and protects all variables which are globally accessible. If in the future we make some use of this list, an empty list will continue to mean all globally accessible variables. @table @code @item @var{type} __sync_fetch_and_add (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_fetch_and_sub (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_fetch_and_or (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_fetch_and_and (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_fetch_and_xor (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_fetch_and_nand (@var{type} *ptr, @var{type} value, ...) @findex __sync_fetch_and_add @findex __sync_fetch_and_sub @findex __sync_fetch_and_or @findex __sync_fetch_and_and @findex __sync_fetch_and_xor @findex __sync_fetch_and_nand These builtins perform the operation suggested by the name, and returns the value that had previously been in memory. That is, @smallexample @{ tmp = *ptr; *ptr @var{op}= value; return tmp; @} @{ tmp = *ptr; *ptr = ~tmp & value; return tmp; @} // nand @end smallexample @item @var{type} __sync_add_and_fetch (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_sub_and_fetch (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_or_and_fetch (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_and_and_fetch (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_xor_and_fetch (@var{type} *ptr, @var{type} value, ...) @itemx @var{type} __sync_nand_and_fetch (@var{type} *ptr, @var{type} value, ...) @findex __sync_add_and_fetch @findex __sync_sub_and_fetch @findex __sync_or_and_fetch @findex __sync_and_and_fetch @findex __sync_xor_and_fetch @findex __sync_nand_and_fetch These builtins perform the operation suggested by the name, and return the new value. That is, @smallexample @{ *ptr @var{op}= value; return *ptr; @} @{ *ptr = ~*ptr & value; return *ptr; @} // nand @end smallexample @item bool __sync_bool_compare_and_swap (@var{type} *ptr, @var{type} oldval @var{type} newval, ...) @itemx @var{type} __sync_val_compare_and_swap (@var{type} *ptr, @var{type} oldval @var{type} newval, ...) @findex __sync_bool_compare_and_swap @findex __sync_val_compare_and_swap These builtins perform an atomic compare and swap. That is, if the current value of @code{*@var{ptr}} is @var{oldval}, then write @var{newval} into @code{*@var{ptr}}. The ``bool'' version returns true if the comparison is successful and @var{newval} was written. The ``val'' version returns the contents of @code{*@var{ptr}} before the operation. @item __sync_synchronize (...) @findex __sync_synchronize This builtin issues a full memory barrier. @item @var{type} __sync_lock_test_and_set (@var{type} *ptr, @var{type} value, ...) @findex __sync_lock_test_and_set This builtin, as described by Intel, is not a traditional test-and-set operation, but rather an atomic exchange operation. It writes @var{value} into @code{*@var{ptr}}, and returns the previous contents of @code{*@var{ptr}}. Many targets have only minimal support for such locks, and do not support a full exchange operation. In this case, a target may support reduced functionality here by which the @emph{only} valid value to store is the immediate constant 1. The exact value actually stored in @code{*@var{ptr}} is implementation defined. This builtin is not a full barrier, but rather an @dfn{acquire barrier}. This means that references after the builtin cannot move to (or be speculated to) before the builtin, but previous memory stores may not be globally visible yet, and previous memory loads may not yet be satisfied. @item void __sync_lock_release (@var{type} *ptr, ...) @findex __sync_lock_release This builtin releases the lock acquired by @code{__sync_lock_test_and_set}. Normally this means writing the constant 0 to @code{*@var{ptr}}. This builtin is not a full barrier, but rather a @dfn{release barrier}. This means that all previous memory stores are globally visible, and all previous memory loads have been satisfied, but following memory reads are not prevented from being speculated to before the barrier. @end table @node Object Size Checking @section Object Size Checking Builtins @findex __builtin_object_size @findex __builtin___memcpy_chk @findex __builtin___mempcpy_chk @findex __builtin___memmove_chk @findex __builtin___memset_chk @findex __builtin___strcpy_chk @findex __builtin___stpcpy_chk @findex __builtin___strncpy_chk @findex __builtin___strcat_chk @findex __builtin___strncat_chk @findex __builtin___sprintf_chk @findex __builtin___snprintf_chk @findex __builtin___vsprintf_chk @findex __builtin___vsnprintf_chk @findex __builtin___printf_chk @findex __builtin___vprintf_chk @findex __builtin___fprintf_chk @findex __builtin___vfprintf_chk GCC implements a limited buffer overflow protection mechanism that can prevent some buffer overflow attacks. @deftypefn {Built-in Function} {size_t} __builtin_object_size (void * @var{ptr}, int @var{type}) is a built-in construct that returns a constant number of bytes from @var{ptr} to the end of the object @var{ptr} pointer points to (if known at compile time). @code{__builtin_object_size} never evaluates its arguments for side-effects. If there are any side-effects in them, it returns @code{(size_t) -1} for @var{type} 0 or 1 and @code{(size_t) 0} for @var{type} 2 or 3. If there are multiple objects @var{ptr} can point to and all of them are known at compile time, the returned number is the maximum of remaining byte counts in those objects if @var{type} & 2 is 0 and minimum if nonzero. If it is not possible to determine which objects @var{ptr} points to at compile time, @code{__builtin_object_size} should return @code{(size_t) -1} for @var{type} 0 or 1 and @code{(size_t) 0} for @var{type} 2 or 3. @var{type} is an integer constant from 0 to 3. If the least significant bit is clear, objects are whole variables, if it is set, a closest surrounding subobject is considered the object a pointer points to. The second bit determines if maximum or minimum of remaining bytes is computed. @smallexample struct V @{ char buf1[10]; int b; char buf2[10]; @} var; char *p = &var.buf1[1], *q = &var.b; /* Here the object p points to is var. */ assert (__builtin_object_size (p, 0) == sizeof (var) - 1); /* The subobject p points to is var.buf1. */ assert (__builtin_object_size (p, 1) == sizeof (var.buf1) - 1); /* The object q points to is var. */ assert (__builtin_object_size (q, 0) == (char *) (&var + 1) - (char *) &var.b); /* The subobject q points to is var.b. */ assert (__builtin_object_size (q, 1) == sizeof (var.b)); @end smallexample @end deftypefn There are built-in functions added for many common string operation functions, e.g. for @code{memcpy} @code{__builtin___memcpy_chk} built-in is provided. This built-in has an additional last argument, which is the number of bytes remaining in object the @var{dest} argument points to or @code{(size_t) -1} if the size is not known. The built-in functions are optimized into the normal string functions like @code{memcpy} if the last argument is @code{(size_t) -1} or if it is known at compile time that the destination object will not be overflown. If the compiler can determine at compile time the object will be always overflown, it issues a warning. The intended use can be e.g. @smallexample #undef memcpy #define bos0(dest) __builtin_object_size (dest, 0) #define memcpy(dest, src, n) \ __builtin___memcpy_chk (dest, src, n, bos0 (dest)) char *volatile p; char buf[10]; /* It is unknown what object p points to, so this is optimized into plain memcpy - no checking is possible. */ memcpy (p, "abcde", n); /* Destination is known and length too. It is known at compile time there will be no overflow. */ memcpy (&buf[5], "abcde", 5); /* Destination is known, but the length is not known at compile time. This will result in __memcpy_chk call that can check for overflow at runtime. */ memcpy (&buf[5], "abcde", n); /* Destination is known and it is known at compile time there will be overflow. There will be a warning and __memcpy_chk call that will abort the program at runtime. */ memcpy (&buf[6], "abcde", 5); @end smallexample Such built-in functions are provided for @code{memcpy}, @code{mempcpy}, @code{memmove}, @code{memset}, @code{strcpy}, @code{stpcpy}, @code{strncpy}, @code{strcat} and @code{strncat}. There are also checking built-in functions for formatted output functions. @smallexample int __builtin___sprintf_chk (char *s, int flag, size_t os, const char *fmt, ...); int __builtin___snprintf_chk (char *s, size_t maxlen, int flag, size_t os, const char *fmt, ...); int __builtin___vsprintf_chk (char *s, int flag, size_t os, const char *fmt, va_list ap); int __builtin___vsnprintf_chk (char *s, size_t maxlen, int flag, size_t os, const char *fmt, va_list ap); @end smallexample The added @var{flag} argument is passed unchanged to @code{__sprintf_chk} etc. functions and can contain implementation specific flags on what additional security measures the checking function might take, such as handling @code{%n} differently. The @var{os} argument is the object size @var{s} points to, like in the other built-in functions. There is a small difference in the behavior though, if @var{os} is @code{(size_t) -1}, the built-in functions are optimized into the non-checking functions only if @var{flag} is 0, otherwise the checking function is called with @var{os} argument set to @code{(size_t) -1}. In addition to this, there are checking built-in functions @code{__builtin___printf_chk}, @code{__builtin___vprintf_chk}, @code{__builtin___fprintf_chk} and @code{__builtin___vfprintf_chk}. These have just one additional argument, @var{flag}, right before format string @var{fmt}. If the compiler is able to optimize them to @code{fputc} etc. functions, it will, otherwise the checking function should be called and the @var{flag} argument passed to it. @node Other Builtins @section Other built-in functions provided by GCC @cindex built-in functions @findex __builtin_isgreater @findex __builtin_isgreaterequal @findex __builtin_isless @findex __builtin_islessequal @findex __builtin_islessgreater @findex __builtin_isunordered @findex __builtin_powi @findex __builtin_powif @findex __builtin_powil @findex _Exit @findex _exit @findex abort @findex abs @findex acos @findex acosf @findex acosh @findex acoshf @findex acoshl @findex acosl @findex alloca @findex asin @findex asinf @findex asinh @findex asinhf @findex asinhl @findex asinl @findex atan @findex atan2 @findex atan2f @findex atan2l @findex atanf @findex atanh @findex atanhf @findex atanhl @findex atanl @findex bcmp @findex bzero @findex cabs @findex cabsf @findex cabsl @findex cacos @findex cacosf @findex cacosh @findex cacoshf @findex cacoshl @findex cacosl @findex calloc @findex carg @findex cargf @findex cargl @findex casin @findex casinf @findex casinh @findex casinhf @findex casinhl @findex casinl @findex catan @findex catanf @findex catanh @findex catanhf @findex catanhl @findex catanl @findex cbrt @findex cbrtf @findex cbrtl @findex ccos @findex ccosf @findex ccosh @findex ccoshf @findex ccoshl @findex ccosl @findex ceil @findex ceilf @findex ceill @findex cexp @findex cexpf @findex cexpl @findex cimag @findex cimagf @findex cimagl @findex clog @findex clogf @findex clogl @findex conj @findex conjf @findex conjl @findex copysign @findex copysignf @findex copysignl @findex cos @findex cosf @findex cosh @findex coshf @findex coshl @findex cosl @findex cpow @findex cpowf @findex cpowl @findex cproj @findex cprojf @findex cprojl @findex creal @findex crealf @findex creall @findex csin @findex csinf @findex csinh @findex csinhf @findex csinhl @findex csinl @findex csqrt @findex csqrtf @findex csqrtl @findex ctan @findex ctanf @findex ctanh @findex ctanhf @findex ctanhl @findex ctanl @findex dcgettext @findex dgettext @findex drem @findex dremf @findex dreml @findex erf @findex erfc @findex erfcf @findex erfcl @findex erff @findex erfl @findex exit @findex exp @findex exp10 @findex exp10f @findex exp10l @findex exp2 @findex exp2f @findex exp2l @findex expf @findex expl @findex expm1 @findex expm1f @findex expm1l @findex fabs @findex fabsf @findex fabsl @findex fdim @findex fdimf @findex fdiml @findex ffs @findex floor @findex floorf @findex floorl @findex fma @findex fmaf @findex fmal @findex fmax @findex fmaxf @findex fmaxl @findex fmin @findex fminf @findex fminl @findex fmod @findex fmodf @findex fmodl @findex fprintf @findex fprintf_unlocked @findex fputs @findex fputs_unlocked @findex frexp @findex frexpf @findex frexpl @findex fscanf @findex gamma @findex gammaf @findex gammal @findex gettext @findex hypot @findex hypotf @findex hypotl @findex ilogb @findex ilogbf @findex ilogbl @findex imaxabs @findex index @findex isalnum @findex isalpha @findex isascii @findex isblank @findex iscntrl @findex isdigit @findex isgraph @findex islower @findex isprint @findex ispunct @findex isspace @findex isupper @findex iswalnum @findex iswalpha @findex iswblank @findex iswcntrl @findex iswdigit @findex iswgraph @findex iswlower @findex iswprint @findex iswpunct @findex iswspace @findex iswupper @findex iswxdigit @findex isxdigit @findex j0 @findex j0f @findex j0l @findex j1 @findex j1f @findex j1l @findex jn @findex jnf @findex jnl @findex labs @findex ldexp @findex ldexpf @findex ldexpl @findex lgamma @findex lgammaf @findex lgammal @findex llabs @findex llrint @findex llrintf @findex llrintl @findex llround @findex llroundf @findex llroundl @findex log @findex log10 @findex log10f @findex log10l @findex log1p @findex log1pf @findex log1pl @findex log2 @findex log2f @findex log2l @findex logb @findex logbf @findex logbl @findex logf @findex logl @findex lrint @findex lrintf @findex lrintl @findex lround @findex lroundf @findex lroundl @findex malloc @findex memcmp @findex memcpy @findex mempcpy @findex memset @findex modf @findex modff @findex modfl @findex nearbyint @findex nearbyintf @findex nearbyintl @findex nextafter @findex nextafterf @findex nextafterl @findex nexttoward @findex nexttowardf @findex nexttowardl @findex pow @findex pow10 @findex pow10f @findex pow10l @findex powf @findex powl @findex printf @findex printf_unlocked @findex putchar @findex puts @findex remainder @findex remainderf @findex remainderl @findex remquo @findex remquof @findex remquol @findex rindex @findex rint @findex rintf @findex rintl @findex round @findex roundf @findex roundl @findex scalb @findex scalbf @findex scalbl @findex scalbln @findex scalblnf @findex scalblnf @findex scalbn @findex scalbnf @findex scanfnl @findex signbit @findex signbitf @findex signbitl @findex significand @findex significandf @findex significandl @findex sin @findex sincos @findex sincosf @findex sincosl @findex sinf @findex sinh @findex sinhf @findex sinhl @findex sinl @findex snprintf @findex sprintf @findex sqrt @findex sqrtf @findex sqrtl @findex sscanf @findex stpcpy @findex stpncpy @findex strcasecmp @findex strcat @findex strchr @findex strcmp @findex strcpy @findex strcspn @findex strdup @findex strfmon @findex strftime @findex strlen @findex strncasecmp @findex strncat @findex strncmp @findex strncpy @findex strndup @findex strpbrk @findex strrchr @findex strspn @findex strstr @findex tan @findex tanf @findex tanh @findex tanhf @findex tanhl @findex tanl @findex tgamma @findex tgammaf @findex tgammal @findex toascii @findex tolower @findex toupper @findex towlower @findex towupper @findex trunc @findex truncf @findex truncl @findex vfprintf @findex vfscanf @findex vprintf @findex vscanf @findex vsnprintf @findex vsprintf @findex vsscanf @findex y0 @findex y0f @findex y0l @findex y1 @findex y1f @findex y1l @findex yn @findex ynf @findex ynl GCC provides a large number of built-in functions other than the ones mentioned above. Some of these are for internal use in the processing of exceptions or variable-length argument lists and will not be documented here because they may change from time to time; we do not recommend general use of these functions. The remaining functions are provided for optimization purposes. @opindex fno-builtin GCC includes built-in versions of many of the functions in the standard C library. The versions prefixed with @code{__builtin_} will always be treated as having the same meaning as the C library function even if you specify the @option{-fno-builtin} option. (@pxref{C Dialect Options}) Many of these functions are only optimized in certain cases; if they are not optimized in a particular case, a call to the library function will be emitted. @opindex ansi @opindex std Outside strict ISO C mode (@option{-ansi}, @option{-std=c89} or @option{-std=c99}), the functions @code{_exit}, @code{alloca}, @code{bcmp}, @code{bzero}, @code{dcgettext}, @code{dgettext}, @code{dremf}, @code{dreml}, @code{drem}, @code{exp10f}, @code{exp10l}, @code{exp10}, @code{ffsll}, @code{ffsl}, @code{ffs}, @code{fprintf_unlocked}, @code{fputs_unlocked}, @code{gammaf}, @code{gammal}, @code{gamma}, @code{gettext}, @code{index}, @code{isascii}, @code{j0f}, @code{j0l}, @code{j0}, @code{j1f}, @code{j1l}, @code{j1}, @code{jnf}, @code{jnl}, @code{jn}, @code{mempcpy}, @code{pow10f}, @code{pow10l}, @code{pow10}, @code{printf_unlocked}, @code{rindex}, @code{scalbf}, @code{scalbl}, @code{scalb}, @code{signbit}, @code{signbitf}, @code{signbitl}, @code{significandf}, @code{significandl}, @code{significand}, @code{sincosf}, @code{sincosl}, @code{sincos}, @code{stpcpy}, @code{stpncpy}, @code{strcasecmp}, @code{strdup}, @code{strfmon}, @code{strncasecmp}, @code{strndup}, @code{toascii}, @code{y0f}, @code{y0l}, @code{y0}, @code{y1f}, @code{y1l}, @code{y1}, @code{ynf}, @code{ynl} and @code{yn} may be handled as built-in functions. All these functions have corresponding versions prefixed with @code{__builtin_}, which may be used even in strict C89 mode. The ISO C99 functions @code{_Exit}, @code{acoshf}, @code{acoshl}, @code{acosh}, @code{asinhf}, @code{asinhl}, @code{asinh}, @code{atanhf}, @code{atanhl}, @code{atanh}, @code{cabsf}, @code{cabsl}, @code{cabs}, @code{cacosf}, @code{cacoshf}, @code{cacoshl}, @code{cacosh}, @code{cacosl}, @code{cacos}, @code{cargf}, @code{cargl}, @code{carg}, @code{casinf}, @code{casinhf}, @code{casinhl}, @code{casinh}, @code{casinl}, @code{casin}, @code{catanf}, @code{catanhf}, @code{catanhl}, @code{catanh}, @code{catanl}, @code{catan}, @code{cbrtf}, @code{cbrtl}, @code{cbrt}, @code{ccosf}, @code{ccoshf}, @code{ccoshl}, @code{ccosh}, @code{ccosl}, @code{ccos}, @code{cexpf}, @code{cexpl}, @code{cexp}, @code{cimagf}, @code{cimagl}, @code{cimag}, @code{clogf}, @code{clogl}, @code{clog}, @code{conjf}, @code{conjl}, @code{conj}, @code{copysignf}, @code{copysignl}, @code{copysign}, @code{cpowf}, @code{cpowl}, @code{cpow}, @code{cprojf}, @code{cprojl}, @code{cproj}, @code{crealf}, @code{creall}, @code{creal}, @code{csinf}, @code{csinhf}, @code{csinhl}, @code{csinh}, @code{csinl}, @code{csin}, @code{csqrtf}, @code{csqrtl}, @code{csqrt}, @code{ctanf}, @code{ctanhf}, @code{ctanhl}, @code{ctanh}, @code{ctanl}, @code{ctan}, @code{erfcf}, @code{erfcl}, @code{erfc}, @code{erff}, @code{erfl}, @code{erf}, @code{exp2f}, @code{exp2l}, @code{exp2}, @code{expm1f}, @code{expm1l}, @code{expm1}, @code{fdimf}, @code{fdiml}, @code{fdim}, @code{fmaf}, @code{fmal}, @code{fmaxf}, @code{fmaxl}, @code{fmax}, @code{fma}, @code{fminf}, @code{fminl}, @code{fmin}, @code{hypotf}, @code{hypotl}, @code{hypot}, @code{ilogbf}, @code{ilogbl}, @code{ilogb}, @code{imaxabs}, @code{isblank}, @code{iswblank}, @code{lgammaf}, @code{lgammal}, @code{lgamma}, @code{llabs}, @code{llrintf}, @code{llrintl}, @code{llrint}, @code{llroundf}, @code{llroundl}, @code{llround}, @code{log1pf}, @code{log1pl}, @code{log1p}, @code{log2f}, @code{log2l}, @code{log2}, @code{logbf}, @code{logbl}, @code{logb}, @code{lrintf}, @code{lrintl}, @code{lrint}, @code{lroundf}, @code{lroundl}, @code{lround}, @code{nearbyintf}, @code{nearbyintl}, @code{nearbyint}, @code{nextafterf}, @code{nextafterl}, @code{nextafter}, @code{nexttowardf}, @code{nexttowardl}, @code{nexttoward}, @code{remainderf}, @code{remainderl}, @code{remainder}, @code{remquof}, @code{remquol}, @code{remquo}, @code{rintf}, @code{rintl}, @code{rint}, @code{roundf}, @code{roundl}, @code{round}, @code{scalblnf}, @code{scalblnl}, @code{scalbln}, @code{scalbnf}, @code{scalbnl}, @code{scalbn}, @code{snprintf}, @code{tgammaf}, @code{tgammal}, @code{tgamma}, @code{truncf}, @code{truncl}, @code{trunc}, @code{vfscanf}, @code{vscanf}, @code{vsnprintf} and @code{vsscanf} are handled as built-in functions except in strict ISO C90 mode (@option{-ansi} or @option{-std=c89}). There are also built-in versions of the ISO C99 functions @code{acosf}, @code{acosl}, @code{asinf}, @code{asinl}, @code{atan2f}, @code{atan2l}, @code{atanf}, @code{atanl}, @code{ceilf}, @code{ceill}, @code{cosf}, @code{coshf}, @code{coshl}, @code{cosl}, @code{expf}, @code{expl}, @code{fabsf}, @code{fabsl}, @code{floorf}, @code{floorl}, @code{fmodf}, @code{fmodl}, @code{frexpf}, @code{frexpl}, @code{ldexpf}, @code{ldexpl}, @code{log10f}, @code{log10l}, @code{logf}, @code{logl}, @code{modfl}, @code{modf}, @code{powf}, @code{powl}, @code{sinf}, @code{sinhf}, @code{sinhl}, @code{sinl}, @code{sqrtf}, @code{sqrtl}, @code{tanf}, @code{tanhf}, @code{tanhl} and @code{tanl} that are recognized in any mode since ISO C90 reserves these names for the purpose to which ISO C99 puts them. All these functions have corresponding versions prefixed with @code{__builtin_}. The ISO C94 functions @code{iswalnum}, @code{iswalpha}, @code{iswcntrl}, @code{iswdigit}, @code{iswgraph}, @code{iswlower}, @code{iswprint}, @code{iswpunct}, @code{iswspace}, @code{iswupper}, @code{iswxdigit}, @code{towlower} and @code{towupper} are handled as built-in functions except in strict ISO C90 mode (@option{-ansi} or @option{-std=c89}). The ISO C90 functions @code{abort}, @code{abs}, @code{acos}, @code{asin}, @code{atan2}, @code{atan}, @code{calloc}, @code{ceil}, @code{cosh}, @code{cos}, @code{exit}, @code{exp}, @code{fabs}, @code{floor}, @code{fmod}, @code{fprintf}, @code{fputs}, @code{frexp}, @code{fscanf}, @code{isalnum}, @code{isalpha}, @code{iscntrl}, @code{isdigit}, @code{isgraph}, @code{islower}, @code{isprint}, @code{ispunct}, @code{isspace}, @code{isupper}, @code{isxdigit}, @code{tolower}, @code{toupper}, @code{labs}, @code{ldexp}, @code{log10}, @code{log}, @code{malloc}, @code{memcmp}, @code{memcpy}, @code{memset}, @code{modf}, @code{pow}, @code{printf}, @code{putchar}, @code{puts}, @code{scanf}, @code{sinh}, @code{sin}, @code{snprintf}, @code{sprintf}, @code{sqrt}, @code{sscanf}, @code{strcat}, @code{strchr}, @code{strcmp}, @code{strcpy}, @code{strcspn}, @code{strlen}, @code{strncat}, @code{strncmp}, @code{strncpy}, @code{strpbrk}, @code{strrchr}, @code{strspn}, @code{strstr}, @code{tanh}, @code{tan}, @code{vfprintf}, @code{vprintf} and @code{vsprintf} are all recognized as built-in functions unless @option{-fno-builtin} is specified (or @option{-fno-builtin-@var{function}} is specified for an individual function). All of these functions have corresponding versions prefixed with @code{__builtin_}. GCC provides built-in versions of the ISO C99 floating point comparison macros that avoid raising exceptions for unordered operands. They have the same names as the standard macros ( @code{isgreater}, @code{isgreaterequal}, @code{isless}, @code{islessequal}, @code{islessgreater}, and @code{isunordered}) , with @code{__builtin_} prefixed. We intend for a library implementor to be able to simply @code{#define} each standard macro to its built-in equivalent. @deftypefn {Built-in Function} int __builtin_types_compatible_p (@var{type1}, @var{type2}) You can use the built-in function @code{__builtin_types_compatible_p} to determine whether two types are the same. This built-in function returns 1 if the unqualified versions of the types @var{type1} and @var{type2} (which are types, not expressions) are compatible, 0 otherwise. The result of this built-in function can be used in integer constant expressions. This built-in function ignores top level qualifiers (e.g., @code{const}, @code{volatile}). For example, @code{int} is equivalent to @code{const int}. The type @code{int[]} and @code{int[5]} are compatible. On the other hand, @code{int} and @code{char *} are not compatible, even if the size of their types, on the particular architecture are the same. Also, the amount of pointer indirection is taken into account when determining similarity. Consequently, @code{short *} is not similar to @code{short **}. Furthermore, two types that are typedefed are considered compatible if their underlying types are compatible. An @code{enum} type is not considered to be compatible with another @code{enum} type even if both are compatible with the same integer type; this is what the C standard specifies. For example, @code{enum @{foo, bar@}} is not similar to @code{enum @{hot, dog@}}. You would typically use this function in code whose execution varies depending on the arguments' types. For example: @smallexample #define foo(x) \ (@{ \ typeof (x) tmp = (x); \ if (__builtin_types_compatible_p (typeof (x), long double)) \ tmp = foo_long_double (tmp); \ else if (__builtin_types_compatible_p (typeof (x), double)) \ tmp = foo_double (tmp); \ else if (__builtin_types_compatible_p (typeof (x), float)) \ tmp = foo_float (tmp); \ else \ abort (); \ tmp; \ @}) @end smallexample @emph{Note:} This construct is only available for C@. @end deftypefn @deftypefn {Built-in Function} @var{type} __builtin_choose_expr (@var{const_exp}, @var{exp1}, @var{exp2}) You can use the built-in function @code{__builtin_choose_expr} to evaluate code depending on the value of a constant expression. This built-in function returns @var{exp1} if @var{const_exp}, which is a constant expression that must be able to be determined at compile time, is nonzero. Otherwise it returns 0. This built-in function is analogous to the @samp{? :} operator in C, except that the expression returned has its type unaltered by promotion rules. Also, the built-in function does not evaluate the expression that was not chosen. For example, if @var{const_exp} evaluates to true, @var{exp2} is not evaluated even if it has side-effects. This built-in function can return an lvalue if the chosen argument is an lvalue. If @var{exp1} is returned, the return type is the same as @var{exp1}'s type. Similarly, if @var{exp2} is returned, its return type is the same as @var{exp2}. Example: @smallexample #define foo(x) \ __builtin_choose_expr ( \ __builtin_types_compatible_p (typeof (x), double), \ foo_double (x), \ __builtin_choose_expr ( \ __builtin_types_compatible_p (typeof (x), float), \ foo_float (x), \ /* @r{The void expression results in a compile-time error} \ @r{when assigning the result to something.} */ \ (void)0)) @end smallexample @emph{Note:} This construct is only available for C@. Furthermore, the unused expression (@var{exp1} or @var{exp2} depending on the value of @var{const_exp}) may still generate syntax errors. This may change in future revisions. @end deftypefn @deftypefn {Built-in Function} int __builtin_constant_p (@var{exp}) You can use the built-in function @code{__builtin_constant_p} to determine if a value is known to be constant at compile-time and hence that GCC can perform constant-folding on expressions involving that value. The argument of the function is the value to test. The function returns the integer 1 if the argument is known to be a compile-time constant and 0 if it is not known to be a compile-time constant. A return of 0 does not indicate that the value is @emph{not} a constant, but merely that GCC cannot prove it is a constant with the specified value of the @option{-O} option. You would typically use this function in an embedded application where memory was a critical resource. If you have some complex calculation, you may want it to be folded if it involves constants, but need to call a function if it does not. For example: @smallexample #define Scale_Value(X) \ (__builtin_constant_p (X) \ ? ((X) * SCALE + OFFSET) : Scale (X)) @end smallexample You may use this built-in function in either a macro or an inline function. However, if you use it in an inlined function and pass an argument of the function as the argument to the built-in, GCC will never return 1 when you call the inline function with a string constant or compound literal (@pxref{Compound Literals}) and will not return 1 when you pass a constant numeric value to the inline function unless you specify the @option{-O} option. You may also use @code{__builtin_constant_p} in initializers for static data. For instance, you can write @smallexample static const int table[] = @{ __builtin_constant_p (EXPRESSION) ? (EXPRESSION) : -1, /* @r{@dots{}} */ @}; @end smallexample @noindent This is an acceptable initializer even if @var{EXPRESSION} is not a constant expression. GCC must be more conservative about evaluating the built-in in this case, because it has no opportunity to perform optimization. Previous versions of GCC did not accept this built-in in data initializers. The earliest version where it is completely safe is 3.0.1. @end deftypefn @deftypefn {Built-in Function} long __builtin_expect (long @var{exp}, long @var{c}) @opindex fprofile-arcs You may use @code{__builtin_expect} to provide the compiler with branch prediction information. In general, you should prefer to use actual profile feedback for this (@option{-fprofile-arcs}), as programmers are notoriously bad at predicting how their programs actually perform. However, there are applications in which this data is hard to collect. The return value is the value of @var{exp}, which should be an integral expression. The value of @var{c} must be a compile-time constant. The semantics of the built-in are that it is expected that @var{exp} == @var{c}. For example: @smallexample if (__builtin_expect (x, 0)) foo (); @end smallexample @noindent would indicate that we do not expect to call @code{foo}, since we expect @code{x} to be zero. Since you are limited to integral expressions for @var{exp}, you should use constructions such as @smallexample if (__builtin_expect (ptr != NULL, 1)) error (); @end smallexample @noindent when testing pointer or floating-point values. @end deftypefn @deftypefn {Built-in Function} void __builtin_prefetch (const void *@var{addr}, ...) This function is used to minimize cache-miss latency by moving data into a cache before it is accessed. You can insert calls to @code{__builtin_prefetch} into code for which you know addresses of data in memory that is likely to be accessed soon. If the target supports them, data prefetch instructions will be generated. If the prefetch is done early enough before the access then the data will be in the cache by the time it is accessed. The value of @var{addr} is the address of the memory to prefetch. There are two optional arguments, @var{rw} and @var{locality}. The value of @var{rw} is a compile-time constant one or zero; one means that the prefetch is preparing for a write to the memory address and zero, the default, means that the prefetch is preparing for a read. The value @var{locality} must be a compile-time constant integer between zero and three. A value of zero means that the data has no temporal locality, so it need not be left in the cache after the access. A value of three means that the data has a high degree of temporal locality and should be left in all levels of cache possible. Values of one and two mean, respectively, a low or moderate degree of temporal locality. The default is three. @smallexample for (i = 0; i < n; i++) @{ a[i] = a[i] + b[i]; __builtin_prefetch (&a[i+j], 1, 1); __builtin_prefetch (&b[i+j], 0, 1); /* @r{@dots{}} */ @} @end smallexample Data prefetch does not generate faults if @var{addr} is invalid, but the address expression itself must be valid. For example, a prefetch of @code{p->next} will not fault if @code{p->next} is not a valid address, but evaluation will fault if @code{p} is not a valid address. If the target does not support data prefetch, the address expression is evaluated if it includes side effects but no other code is generated and GCC does not issue a warning. @end deftypefn @deftypefn {Built-in Function} double __builtin_huge_val (void) Returns a positive infinity, if supported by the floating-point format, else @code{DBL_MAX}. This function is suitable for implementing the ISO C macro @code{HUGE_VAL}. @end deftypefn @deftypefn {Built-in Function} float __builtin_huge_valf (void) Similar to @code{__builtin_huge_val}, except the return type is @code{float}. @end deftypefn @deftypefn {Built-in Function} {long double} __builtin_huge_vall (void) Similar to @code{__builtin_huge_val}, except the return type is @code{long double}. @end deftypefn @deftypefn {Built-in Function} double __builtin_inf (void) Similar to @code{__builtin_huge_val}, except a warning is generated if the target floating-point format does not support infinities. @end deftypefn @deftypefn {Built-in Function} _Decimal32 __builtin_infd32 (void) Similar to @code{__builtin_inf}, except the return type is @code{_Decimal32}. @end deftypefn @deftypefn {Built-in Function} _Decimal64 __builtin_infd64 (void) Similar to @code{__builtin_inf}, except the return type is @code{_Decimal64}. @end deftypefn @deftypefn {Built-in Function} _Decimal128 __builtin_infd128 (void) Similar to @code{__builtin_inf}, except the return type is @code{_Decimal128}. @end deftypefn @deftypefn {Built-in Function} float __builtin_inff (void) Similar to @code{__builtin_inf}, except the return type is @code{float}. This function is suitable for implementing the ISO C99 macro @code{INFINITY}. @end deftypefn @deftypefn {Built-in Function} {long double} __builtin_infl (void) Similar to @code{__builtin_inf}, except the return type is @code{long double}. @end deftypefn @deftypefn {Built-in Function} double __builtin_nan (const char *str) This is an implementation of the ISO C99 function @code{nan}. Since ISO C99 defines this function in terms of @code{strtod}, which we do not implement, a description of the parsing is in order. The string is parsed as by @code{strtol}; that is, the base is recognized by leading @samp{0} or @samp{0x} prefixes. The number parsed is placed in the significand such that the least significant bit of the number is at the least significant bit of the significand. The number is truncated to fit the significand field provided. The significand is forced to be a quiet NaN@. This function, if given a string literal all of which would have been consumed by strtol, is evaluated early enough that it is considered a compile-time constant. @end deftypefn @deftypefn {Built-in Function} _Decimal32 __builtin_nand32 (const char *str) Similar to @code{__builtin_nan}, except the return type is @code{_Decimal32}. @end deftypefn @deftypefn {Built-in Function} _Decimal64 __builtin_nand64 (const char *str) Similar to @code{__builtin_nan}, except the return type is @code{_Decimal64}. @end deftypefn @deftypefn {Built-in Function} _Decimal128 __builtin_nand128 (const char *str) Similar to @code{__builtin_nan}, except the return type is @code{_Decimal128}. @end deftypefn @deftypefn {Built-in Function} float __builtin_nanf (const char *str) Similar to @code{__builtin_nan}, except the return type is @code{float}. @end deftypefn @deftypefn {Built-in Function} {long double} __builtin_nanl (const char *str) Similar to @code{__builtin_nan}, except the return type is @code{long double}. @end deftypefn @deftypefn {Built-in Function} double __builtin_nans (const char *str) Similar to @code{__builtin_nan}, except the significand is forced to be a signaling NaN@. The @code{nans} function is proposed by @uref{http://www.open-std.org/jtc1/sc22/wg14/www/docs/n965.htm,,WG14 N965}. @end deftypefn @deftypefn {Built-in Function} float __builtin_nansf (const char *str) Similar to @code{__builtin_nans}, except the return type is @code{float}. @end deftypefn @deftypefn {Built-in Function} {long double} __builtin_nansl (const char *str) Similar to @code{__builtin_nans}, except the return type is @code{long double}. @end deftypefn @deftypefn {Built-in Function} int __builtin_ffs (unsigned int x) Returns one plus the index of the least significant 1-bit of @var{x}, or if @var{x} is zero, returns zero. @end deftypefn @deftypefn {Built-in Function} int __builtin_clz (unsigned int x) Returns the number of leading 0-bits in @var{x}, starting at the most significant bit position. If @var{x} is 0, the result is undefined. @end deftypefn @deftypefn {Built-in Function} int __builtin_ctz (unsigned int x) Returns the number of trailing 0-bits in @var{x}, starting at the least significant bit position. If @var{x} is 0, the result is undefined. @end deftypefn @deftypefn {Built-in Function} int __builtin_popcount (unsigned int x) Returns the number of 1-bits in @var{x}. @end deftypefn @deftypefn {Built-in Function} int __builtin_parity (unsigned int x) Returns the parity of @var{x}, i.e.@: the number of 1-bits in @var{x} modulo 2. @end deftypefn @deftypefn {Built-in Function} int __builtin_ffsl (unsigned long) Similar to @code{__builtin_ffs}, except the argument type is @code{unsigned long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_clzl (unsigned long) Similar to @code{__builtin_clz}, except the argument type is @code{unsigned long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_ctzl (unsigned long) Similar to @code{__builtin_ctz}, except the argument type is @code{unsigned long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_popcountl (unsigned long) Similar to @code{__builtin_popcount}, except the argument type is @code{unsigned long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_parityl (unsigned long) Similar to @code{__builtin_parity}, except the argument type is @code{unsigned long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_ffsll (unsigned long long) Similar to @code{__builtin_ffs}, except the argument type is @code{unsigned long long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_clzll (unsigned long long) Similar to @code{__builtin_clz}, except the argument type is @code{unsigned long long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_ctzll (unsigned long long) Similar to @code{__builtin_ctz}, except the argument type is @code{unsigned long long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_popcountll (unsigned long long) Similar to @code{__builtin_popcount}, except the argument type is @code{unsigned long long}. @end deftypefn @deftypefn {Built-in Function} int __builtin_parityll (unsigned long long) Similar to @code{__builtin_parity}, except the argument type is @code{unsigned long long}. @end deftypefn @deftypefn {Built-in Function} double __builtin_powi (double, int) Returns the first argument raised to the power of the second. Unlike the @code{pow} function no guarantees about precision and rounding are made. @end deftypefn @deftypefn {Built-in Function} float __builtin_powif (float, int) Similar to @code{__builtin_powi}, except the argument and return types are @code{float}. @end deftypefn @deftypefn {Built-in Function} {long double} __builtin_powil (long double, int) Similar to @code{__builtin_powi}, except the argument and return types are @code{long double}. @end deftypefn @node Target Builtins @section Built-in Functions Specific to Particular Target Machines On some target machines, GCC supports many built-in functions specific to those machines. Generally these generate calls to specific machine instructions, but allow the compiler to schedule those calls. @menu * Alpha Built-in Functions:: * ARM Built-in Functions:: * Blackfin Built-in Functions:: * FR-V Built-in Functions:: * X86 Built-in Functions:: * MIPS DSP Built-in Functions:: * MIPS Paired-Single Support:: * PowerPC AltiVec Built-in Functions:: * SPARC VIS Built-in Functions:: @end menu @node Alpha Built-in Functions @subsection Alpha Built-in Functions These built-in functions are available for the Alpha family of processors, depending on the command-line switches used. The following built-in functions are always available. They all generate the machine instruction that is part of the name. @smallexample long __builtin_alpha_implver (void) long __builtin_alpha_rpcc (void) long __builtin_alpha_amask (long) long __builtin_alpha_cmpbge (long, long) long __builtin_alpha_extbl (long, long) long __builtin_alpha_extwl (long, long) long __builtin_alpha_extll (long, long) long __builtin_alpha_extql (long, long) long __builtin_alpha_extwh (long, long) long __builtin_alpha_extlh (long, long) long __builtin_alpha_extqh (long, long) long __builtin_alpha_insbl (long, long) long __builtin_alpha_inswl (long, long) long __builtin_alpha_insll (long, long) long __builtin_alpha_insql (long, long) long __builtin_alpha_inswh (long, long) long __builtin_alpha_inslh (long, long) long __builtin_alpha_insqh (long, long) long __builtin_alpha_mskbl (long, long) long __builtin_alpha_mskwl (long, long) long __builtin_alpha_mskll (long, long) long __builtin_alpha_mskql (long, long) long __builtin_alpha_mskwh (long, long) long __builtin_alpha_msklh (long, long) long __builtin_alpha_mskqh (long, long) long __builtin_alpha_umulh (long, long) long __builtin_alpha_zap (long, long) long __builtin_alpha_zapnot (long, long) @end smallexample The following built-in functions are always with @option{-mmax} or @option{-mcpu=@var{cpu}} where @var{cpu} is @code{pca56} or later. They all generate the machine instruction that is part of the name. @smallexample long __builtin_alpha_pklb (long) long __builtin_alpha_pkwb (long) long __builtin_alpha_unpkbl (long) long __builtin_alpha_unpkbw (long) long __builtin_alpha_minub8 (long, long) long __builtin_alpha_minsb8 (long, long) long __builtin_alpha_minuw4 (long, long) long __builtin_alpha_minsw4 (long, long) long __builtin_alpha_maxub8 (long, long) long __builtin_alpha_maxsb8 (long, long) long __builtin_alpha_maxuw4 (long, long) long __builtin_alpha_maxsw4 (long, long) long __builtin_alpha_perr (long, long) @end smallexample The following built-in functions are always with @option{-mcix} or @option{-mcpu=@var{cpu}} where @var{cpu} is @code{ev67} or later. They all generate the machine instruction that is part of the name. @smallexample long __builtin_alpha_cttz (long) long __builtin_alpha_ctlz (long) long __builtin_alpha_ctpop (long) @end smallexample The following builtins are available on systems that use the OSF/1 PALcode. Normally they invoke the @code{rduniq} and @code{wruniq} PAL calls, but when invoked with @option{-mtls-kernel}, they invoke @code{rdval} and @code{wrval}. @smallexample void *__builtin_thread_pointer (void) void __builtin_set_thread_pointer (void *) @end smallexample @node ARM Built-in Functions @subsection ARM Built-in Functions These built-in functions are available for the ARM family of processors, when the @option{-mcpu=iwmmxt} switch is used: @smallexample typedef int v2si __attribute__ ((vector_size (8))); typedef short v4hi __attribute__ ((vector_size (8))); typedef char v8qi __attribute__ ((vector_size (8))); int __builtin_arm_getwcx (int) void __builtin_arm_setwcx (int, int) int __builtin_arm_textrmsb (v8qi, int) int __builtin_arm_textrmsh (v4hi, int) int __builtin_arm_textrmsw (v2si, int) int __builtin_arm_textrmub (v8qi, int) int __builtin_arm_textrmuh (v4hi, int) int __builtin_arm_textrmuw (v2si, int) v8qi __builtin_arm_tinsrb (v8qi, int) v4hi __builtin_arm_tinsrh (v4hi, int) v2si __builtin_arm_tinsrw (v2si, int) long long __builtin_arm_tmia (long long, int, int) long long __builtin_arm_tmiabb (long long, int, int) long long __builtin_arm_tmiabt (long long, int, int) long long __builtin_arm_tmiaph (long long, int, int) long long __builtin_arm_tmiatb (long long, int, int) long long __builtin_arm_tmiatt (long long, int, int) int __builtin_arm_tmovmskb (v8qi) int __builtin_arm_tmovmskh (v4hi) int __builtin_arm_tmovmskw (v2si) long long __builtin_arm_waccb (v8qi) long long __builtin_arm_wacch (v4hi) long long __builtin_arm_waccw (v2si) v8qi __builtin_arm_waddb (v8qi, v8qi) v8qi __builtin_arm_waddbss (v8qi, v8qi) v8qi __builtin_arm_waddbus (v8qi, v8qi) v4hi __builtin_arm_waddh (v4hi, v4hi) v4hi __builtin_arm_waddhss (v4hi, v4hi) v4hi __builtin_arm_waddhus (v4hi, v4hi) v2si __builtin_arm_waddw (v2si, v2si) v2si __builtin_arm_waddwss (v2si, v2si) v2si __builtin_arm_waddwus (v2si, v2si) v8qi __builtin_arm_walign (v8qi, v8qi, int) long long __builtin_arm_wand(long long, long long) long long __builtin_arm_wandn (long long, long long) v8qi __builtin_arm_wavg2b (v8qi, v8qi) v8qi __builtin_arm_wavg2br (v8qi, v8qi) v4hi __builtin_arm_wavg2h (v4hi, v4hi) v4hi __builtin_arm_wavg2hr (v4hi, v4hi) v8qi __builtin_arm_wcmpeqb (v8qi, v8qi) v4hi __builtin_arm_wcmpeqh (v4hi, v4hi) v2si __builtin_arm_wcmpeqw (v2si, v2si) v8qi __builtin_arm_wcmpgtsb (v8qi, v8qi) v4hi __builtin_arm_wcmpgtsh (v4hi, v4hi) v2si __builtin_arm_wcmpgtsw (v2si, v2si) v8qi __builtin_arm_wcmpgtub (v8qi, v8qi) v4hi __builtin_arm_wcmpgtuh (v4hi, v4hi) v2si __builtin_arm_wcmpgtuw (v2si, v2si) long long __builtin_arm_wmacs (long long, v4hi, v4hi) long long __builtin_arm_wmacsz (v4hi, v4hi) long long __builtin_arm_wmacu (long long, v4hi, v4hi) long long __builtin_arm_wmacuz (v4hi, v4hi) v4hi __builtin_arm_wmadds (v4hi, v4hi) v4hi __builtin_arm_wmaddu (v4hi, v4hi) v8qi __builtin_arm_wmaxsb (v8qi, v8qi) v4hi __builtin_arm_wmaxsh (v4hi, v4hi) v2si __builtin_arm_wmaxsw (v2si, v2si) v8qi __builtin_arm_wmaxub (v8qi, v8qi) v4hi __builtin_arm_wmaxuh (v4hi, v4hi) v2si __builtin_arm_wmaxuw (v2si, v2si) v8qi __builtin_arm_wminsb (v8qi, v8qi) v4hi __builtin_arm_wminsh (v4hi, v4hi) v2si __builtin_arm_wminsw (v2si, v2si) v8qi __builtin_arm_wminub (v8qi, v8qi) v4hi __builtin_arm_wminuh (v4hi, v4hi) v2si __builtin_arm_wminuw (v2si, v2si) v4hi __builtin_arm_wmulsm (v4hi, v4hi) v4hi __builtin_arm_wmulul (v4hi, v4hi) v4hi __builtin_arm_wmulum (v4hi, v4hi) long long __builtin_arm_wor (long long, long long) v2si __builtin_arm_wpackdss (long long, long long) v2si __builtin_arm_wpackdus (long long, long long) v8qi __builtin_arm_wpackhss (v4hi, v4hi) v8qi __builtin_arm_wpackhus (v4hi, v4hi) v4hi __builtin_arm_wpackwss (v2si, v2si) v4hi __builtin_arm_wpackwus (v2si, v2si) long long __builtin_arm_wrord (long long, long long) long long __builtin_arm_wrordi (long long, int) v4hi __builtin_arm_wrorh (v4hi, long long) v4hi __builtin_arm_wrorhi (v4hi, int) v2si __builtin_arm_wrorw (v2si, long long) v2si __builtin_arm_wrorwi (v2si, int) v2si __builtin_arm_wsadb (v8qi, v8qi) v2si __builtin_arm_wsadbz (v8qi, v8qi) v2si __builtin_arm_wsadh (v4hi, v4hi) v2si __builtin_arm_wsadhz (v4hi, v4hi) v4hi __builtin_arm_wshufh (v4hi, int) long long __builtin_arm_wslld (long long, long long) long long __builtin_arm_wslldi (long long, int) v4hi __builtin_arm_wsllh (v4hi, long long) v4hi __builtin_arm_wsllhi (v4hi, int) v2si __builtin_arm_wsllw (v2si, long long) v2si __builtin_arm_wsllwi (v2si, int) long long __builtin_arm_wsrad (long long, long long) long long __builtin_arm_wsradi (long long, int) v4hi __builtin_arm_wsrah (v4hi, long long) v4hi __builtin_arm_wsrahi (v4hi, int) v2si __builtin_arm_wsraw (v2si, long long) v2si __builtin_arm_wsrawi (v2si, int) long long __builtin_arm_wsrld (long long, long long) long long __builtin_arm_wsrldi (long long, int) v4hi __builtin_arm_wsrlh (v4hi, long long) v4hi __builtin_arm_wsrlhi (v4hi, int) v2si __builtin_arm_wsrlw (v2si, long long) v2si __builtin_arm_wsrlwi (v2si, int) v8qi __builtin_arm_wsubb (v8qi, v8qi) v8qi __builtin_arm_wsubbss (v8qi, v8qi) v8qi __builtin_arm_wsubbus (v8qi, v8qi) v4hi __builtin_arm_wsubh (v4hi, v4hi) v4hi __builtin_arm_wsubhss (v4hi, v4hi) v4hi __builtin_arm_wsubhus (v4hi, v4hi) v2si __builtin_arm_wsubw (v2si, v2si) v2si __builtin_arm_wsubwss (v2si, v2si) v2si __builtin_arm_wsubwus (v2si, v2si) v4hi __builtin_arm_wunpckehsb (v8qi) v2si __builtin_arm_wunpckehsh (v4hi) long long __builtin_arm_wunpckehsw (v2si) v4hi __builtin_arm_wunpckehub (v8qi) v2si __builtin_arm_wunpckehuh (v4hi) long long __builtin_arm_wunpckehuw (v2si) v4hi __builtin_arm_wunpckelsb (v8qi) v2si __builtin_arm_wunpckelsh (v4hi) long long __builtin_arm_wunpckelsw (v2si) v4hi __builtin_arm_wunpckelub (v8qi) v2si __builtin_arm_wunpckeluh (v4hi) long long __builtin_arm_wunpckeluw (v2si) v8qi __builtin_arm_wunpckihb (v8qi, v8qi) v4hi __builtin_arm_wunpckihh (v4hi, v4hi) v2si __builtin_arm_wunpckihw (v2si, v2si) v8qi __builtin_arm_wunpckilb (v8qi, v8qi) v4hi __builtin_arm_wunpckilh (v4hi, v4hi) v2si __builtin_arm_wunpckilw (v2si, v2si) long long __builtin_arm_wxor (long long, long long) long long __builtin_arm_wzero () @end smallexample @node Blackfin Built-in Functions @subsection Blackfin Built-in Functions Currently, there are two Blackfin-specific built-in functions. These are used for generating @code{CSYNC} and @code{SSYNC} machine insns without using inline assembly; by using these built-in functions the compiler can automatically add workarounds for hardware errata involving these instructions. These functions are named as follows: @smallexample void __builtin_bfin_csync (void) void __builtin_bfin_ssync (void) @end smallexample @node FR-V Built-in Functions @subsection FR-V Built-in Functions GCC provides many FR-V-specific built-in functions. In general, these functions are intended to be compatible with those described by @cite{FR-V Family, Softune C/C++ Compiler Manual (V6), Fujitsu Semiconductor}. The two exceptions are @code{__MDUNPACKH} and @code{__MBTOHE}, the gcc forms of which pass 128-bit values by pointer rather than by value. Most of the functions are named after specific FR-V instructions. Such functions are said to be ``directly mapped'' and are summarized here in tabular form. @menu * Argument Types:: * Directly-mapped Integer Functions:: * Directly-mapped Media Functions:: * Raw read/write Functions:: * Other Built-in Functions:: @end menu @node Argument Types @subsubsection Argument Types The arguments to the built-in functions can be divided into three groups: register numbers, compile-time constants and run-time values. In order to make this classification clear at a glance, the arguments and return values are given the following pseudo types: @multitable @columnfractions .20 .30 .15 .35 @item Pseudo type @tab Real C type @tab Constant? @tab Description @item @code{uh} @tab @code{unsigned short} @tab No @tab an unsigned halfword @item @code{uw1} @tab @code{unsigned int} @tab No @tab an unsigned word @item @code{sw1} @tab @code{int} @tab No @tab a signed word @item @code{uw2} @tab @code{unsigned long long} @tab No @tab an unsigned doubleword @item @code{sw2} @tab @code{long long} @tab No @tab a signed doubleword @item @code{const} @tab @code{int} @tab Yes @tab an integer constant @item @code{acc} @tab @code{int} @tab Yes @tab an ACC register number @item @code{iacc} @tab @code{int} @tab Yes @tab an IACC register number @end multitable These pseudo types are not defined by GCC, they are simply a notational convenience used in this manual. Arguments of type @code{uh}, @code{uw1}, @code{sw1}, @code{uw2} and @code{sw2} are evaluated at run time. They correspond to register operands in the underlying FR-V instructions. @code{const} arguments represent immediate operands in the underlying FR-V instructions. They must be compile-time constants. @code{acc} arguments are evaluated at compile time and specify the number of an accumulator register. For example, an @code{acc} argument of 2 will select the ACC2 register. @code{iacc} arguments are similar to @code{acc} arguments but specify the number of an IACC register. See @pxref{Other Built-in Functions} for more details. @node Directly-mapped Integer Functions @subsubsection Directly-mapped Integer Functions The functions listed below map directly to FR-V I-type instructions. @multitable @columnfractions .45 .32 .23 @item Function prototype @tab Example usage @tab Assembly output @item @code{sw1 __ADDSS (sw1, sw1)} @tab @code{@var{c} = __ADDSS (@var{a}, @var{b})} @tab @code{ADDSS @var{a},@var{b},@var{c}} @item @code{sw1 __SCAN (sw1, sw1)} @tab @code{@var{c} = __SCAN (@var{a}, @var{b})} @tab @code{SCAN @var{a},@var{b},@var{c}} @item @code{sw1 __SCUTSS (sw1)} @tab @code{@var{b} = __SCUTSS (@var{a})} @tab @code{SCUTSS @var{a},@var{b}} @item @code{sw1 __SLASS (sw1, sw1)} @tab @code{@var{c} = __SLASS (@var{a}, @var{b})} @tab @code{SLASS @var{a},@var{b},@var{c}} @item @code{void __SMASS (sw1, sw1)} @tab @code{__SMASS (@var{a}, @var{b})} @tab @code{SMASS @var{a},@var{b}} @item @code{void __SMSSS (sw1, sw1)} @tab @code{__SMSSS (@var{a}, @var{b})} @tab @code{SMSSS @var{a},@var{b}} @item @code{void __SMU (sw1, sw1)} @tab @code{__SMU (@var{a}, @var{b})} @tab @code{SMU @var{a},@var{b}} @item @code{sw2 __SMUL (sw1, sw1)} @tab @code{@var{c} = __SMUL (@var{a}, @var{b})} @tab @code{SMUL @var{a},@var{b},@var{c}} @item @code{sw1 __SUBSS (sw1, sw1)} @tab @code{@var{c} = __SUBSS (@var{a}, @var{b})} @tab @code{SUBSS @var{a},@var{b},@var{c}} @item @code{uw2 __UMUL (uw1, uw1)} @tab @code{@var{c} = __UMUL (@var{a}, @var{b})} @tab @code{UMUL @var{a},@var{b},@var{c}} @end multitable @node Directly-mapped Media Functions @subsubsection Directly-mapped Media Functions The functions listed below map directly to FR-V M-type instructions. @multitable @columnfractions .45 .32 .23 @item Function prototype @tab Example usage @tab Assembly output @item @code{uw1 __MABSHS (sw1)} @tab @code{@var{b} = __MABSHS (@var{a})} @tab @code{MABSHS @var{a},@var{b}} @item @code{void __MADDACCS (acc, acc)} @tab @code{__MADDACCS (@var{b}, @var{a})} @tab @code{MADDACCS @var{a},@var{b}} @item @code{sw1 __MADDHSS (sw1, sw1)} @tab @code{@var{c} = __MADDHSS (@var{a}, @var{b})} @tab @code{MADDHSS @var{a},@var{b},@var{c}} @item @code{uw1 __MADDHUS (uw1, uw1)} @tab @code{@var{c} = __MADDHUS (@var{a}, @var{b})} @tab @code{MADDHUS @var{a},@var{b},@var{c}} @item @code{uw1 __MAND (uw1, uw1)} @tab @code{@var{c} = __MAND (@var{a}, @var{b})} @tab @code{MAND @var{a},@var{b},@var{c}} @item @code{void __MASACCS (acc, acc)} @tab @code{__MASACCS (@var{b}, @var{a})} @tab @code{MASACCS @var{a},@var{b}} @item @code{uw1 __MAVEH (uw1, uw1)} @tab @code{@var{c} = __MAVEH (@var{a}, @var{b})} @tab @code{MAVEH @var{a},@var{b},@var{c}} @item @code{uw2 __MBTOH (uw1)} @tab @code{@var{b} = __MBTOH (@var{a})} @tab @code{MBTOH @var{a},@var{b}} @item @code{void __MBTOHE (uw1 *, uw1)} @tab @code{__MBTOHE (&@var{b}, @var{a})} @tab @code{MBTOHE @var{a},@var{b}} @item @code{void __MCLRACC (acc)} @tab @code{__MCLRACC (@var{a})} @tab @code{MCLRACC @var{a}} @item @code{void __MCLRACCA (void)} @tab @code{__MCLRACCA ()} @tab @code{MCLRACCA} @item @code{uw1 __Mcop1 (uw1, uw1)} @tab @code{@var{c} = __Mcop1 (@var{a}, @var{b})} @tab @code{Mcop1 @var{a},@var{b},@var{c}} @item @code{uw1 __Mcop2 (uw1, uw1)} @tab @code{@var{c} = __Mcop2 (@var{a}, @var{b})} @tab @code{Mcop2 @var{a},@var{b},@var{c}} @item @code{uw1 __MCPLHI (uw2, const)} @tab @code{@var{c} = __MCPLHI (@var{a}, @var{b})} @tab @code{MCPLHI @var{a},#@var{b},@var{c}} @item @code{uw1 __MCPLI (uw2, const)} @tab @code{@var{c} = __MCPLI (@var{a}, @var{b})} @tab @code{MCPLI @var{a},#@var{b},@var{c}} @item @code{void __MCPXIS (acc, sw1, sw1)} @tab @code{__MCPXIS (@var{c}, @var{a}, @var{b})} @tab @code{MCPXIS @var{a},@var{b},@var{c}} @item @code{void __MCPXIU (acc, uw1, uw1)} @tab @code{__MCPXIU (@var{c}, @var{a}, @var{b})} @tab @code{MCPXIU @var{a},@var{b},@var{c}} @item @code{void __MCPXRS (acc, sw1, sw1)} @tab @code{__MCPXRS (@var{c}, @var{a}, @var{b})} @tab @code{MCPXRS @var{a},@var{b},@var{c}} @item @code{void __MCPXRU (acc, uw1, uw1)} @tab @code{__MCPXRU (@var{c}, @var{a}, @var{b})} @tab @code{MCPXRU @var{a},@var{b},@var{c}} @item @code{uw1 __MCUT (acc, uw1)} @tab @code{@var{c} = __MCUT (@var{a}, @var{b})} @tab @code{MCUT @var{a},@var{b},@var{c}} @item @code{uw1 __MCUTSS (acc, sw1)} @tab @code{@var{c} = __MCUTSS (@var{a}, @var{b})} @tab @code{MCUTSS @var{a},@var{b},@var{c}} @item @code{void __MDADDACCS (acc, acc)} @tab @code{__MDADDACCS (@var{b}, @var{a})} @tab @code{MDADDACCS @var{a},@var{b}} @item @code{void __MDASACCS (acc, acc)} @tab @code{__MDASACCS (@var{b}, @var{a})} @tab @code{MDASACCS @var{a},@var{b}} @item @code{uw2 __MDCUTSSI (acc, const)} @tab @code{@var{c} = __MDCUTSSI (@var{a}, @var{b})} @tab @code{MDCUTSSI @var{a},#@var{b},@var{c}} @item @code{uw2 __MDPACKH (uw2, uw2)} @tab @code{@var{c} = __MDPACKH (@var{a}, @var{b})} @tab @code{MDPACKH @var{a},@var{b},@var{c}} @item @code{uw2 __MDROTLI (uw2, const)} @tab @code{@var{c} = __MDROTLI (@var{a}, @var{b})} @tab @code{MDROTLI @var{a},#@var{b},@var{c}} @item @code{void __MDSUBACCS (acc, acc)} @tab @code{__MDSUBACCS (@var{b}, @var{a})} @tab @code{MDSUBACCS @var{a},@var{b}} @item @code{void __MDUNPACKH (uw1 *, uw2)} @tab @code{__MDUNPACKH (&@var{b}, @var{a})} @tab @code{MDUNPACKH @var{a},@var{b}} @item @code{uw2 __MEXPDHD (uw1, const)} @tab @code{@var{c} = __MEXPDHD (@var{a}, @var{b})} @tab @code{MEXPDHD @var{a},#@var{b},@var{c}} @item @code{uw1 __MEXPDHW (uw1, const)} @tab @code{@var{c} = __MEXPDHW (@var{a}, @var{b})} @tab @code{MEXPDHW @var{a},#@var{b},@var{c}} @item @code{uw1 __MHDSETH (uw1, const)} @tab @code{@var{c} = __MHDSETH (@var{a}, @var{b})} @tab @code{MHDSETH @var{a},#@var{b},@var{c}} @item @code{sw1 __MHDSETS (const)} @tab @code{@var{b} = __MHDSETS (@var{a})} @tab @code{MHDSETS #@var{a},@var{b}} @item @code{uw1 __MHSETHIH (uw1, const)} @tab @code{@var{b} = __MHSETHIH (@var{b}, @var{a})} @tab @code{MHSETHIH #@var{a},@var{b}} @item @code{sw1 __MHSETHIS (sw1, const)} @tab @code{@var{b} = __MHSETHIS (@var{b}, @var{a})} @tab @code{MHSETHIS #@var{a},@var{b}} @item @code{uw1 __MHSETLOH (uw1, const)} @tab @code{@var{b} = __MHSETLOH (@var{b}, @var{a})} @tab @code{MHSETLOH #@var{a},@var{b}} @item @code{sw1 __MHSETLOS (sw1, const)} @tab @code{@var{b} = __MHSETLOS (@var{b}, @var{a})} @tab @code{MHSETLOS #@var{a},@var{b}} @item @code{uw1 __MHTOB (uw2)} @tab @code{@var{b} = __MHTOB (@var{a})} @tab @code{MHTOB @var{a},@var{b}} @item @code{void __MMACHS (acc, sw1, sw1)} @tab @code{__MMACHS (@var{c}, @var{a}, @var{b})} @tab @code{MMACHS @var{a},@var{b},@var{c}} @item @code{void __MMACHU (acc, uw1, uw1)} @tab @code{__MMACHU (@var{c}, @var{a}, @var{b})} @tab @code{MMACHU @var{a},@var{b},@var{c}} @item @code{void __MMRDHS (acc, sw1, sw1)} @tab @code{__MMRDHS (@var{c}, @var{a}, @var{b})} @tab @code{MMRDHS @var{a},@var{b},@var{c}} @item @code{void __MMRDHU (acc, uw1, uw1)} @tab @code{__MMRDHU (@var{c}, @var{a}, @var{b})} @tab @code{MMRDHU @var{a},@var{b},@var{c}} @item @code{void __MMULHS (acc, sw1, sw1)} @tab @code{__MMULHS (@var{c}, @var{a}, @var{b})} @tab @code{MMULHS @var{a},@var{b},@var{c}} @item @code{void __MMULHU (acc, uw1, uw1)} @tab @code{__MMULHU (@var{c}, @var{a}, @var{b})} @tab @code{MMULHU @var{a},@var{b},@var{c}} @item @code{void __MMULXHS (acc, sw1, sw1)} @tab @code{__MMULXHS (@var{c}, @var{a}, @var{b})} @tab @code{MMULXHS @var{a},@var{b},@var{c}} @item @code{void __MMULXHU (acc, uw1, uw1)} @tab @code{__MMULXHU (@var{c}, @var{a}, @var{b})} @tab @code{MMULXHU @var{a},@var{b},@var{c}} @item @code{uw1 __MNOT (uw1)} @tab @code{@var{b} = __MNOT (@var{a})} @tab @code{MNOT @var{a},@var{b}} @item @code{uw1 __MOR (uw1, uw1)} @tab @code{@var{c} = __MOR (@var{a}, @var{b})} @tab @code{MOR @var{a},@var{b},@var{c}} @item @code{uw1 __MPACKH (uh, uh)} @tab @code{@var{c} = __MPACKH (@var{a}, @var{b})} @tab @code{MPACKH @var{a},@var{b},@var{c}} @item @code{sw2 __MQADDHSS (sw2, sw2)} @tab @code{@var{c} = __MQADDHSS (@var{a}, @var{b})} @tab @code{MQADDHSS @var{a},@var{b},@var{c}} @item @code{uw2 __MQADDHUS (uw2, uw2)} @tab @code{@var{c} = __MQADDHUS (@var{a}, @var{b})} @tab @code{MQADDHUS @var{a},@var{b},@var{c}} @item @code{void __MQCPXIS (acc, sw2, sw2)} @tab @code{__MQCPXIS (@var{c}, @var{a}, @var{b})} @tab @code{MQCPXIS @var{a},@var{b},@var{c}} @item @code{void __MQCPXIU (acc, uw2, uw2)} @tab @code{__MQCPXIU (@var{c}, @var{a}, @var{b})} @tab @code{MQCPXIU @var{a},@var{b},@var{c}} @item @code{void __MQCPXRS (acc, sw2, sw2)} @tab @code{__MQCPXRS (@var{c}, @var{a}, @var{b})} @tab @code{MQCPXRS @var{a},@var{b},@var{c}} @item @code{void __MQCPXRU (acc, uw2, uw2)} @tab @code{__MQCPXRU (@var{c}, @var{a}, @var{b})} @tab @code{MQCPXRU @var{a},@var{b},@var{c}} @item @code{sw2 __MQLCLRHS (sw2, sw2)} @tab @code{@var{c} = __MQLCLRHS (@var{a}, @var{b})} @tab @code{MQLCLRHS @var{a},@var{b},@var{c}} @item @code{sw2 __MQLMTHS (sw2, sw2)} @tab @code{@var{c} = __MQLMTHS (@var{a}, @var{b})} @tab @code{MQLMTHS @var{a},@var{b},@var{c}} @item @code{void __MQMACHS (acc, sw2, sw2)} @tab @code{__MQMACHS (@var{c}, @var{a}, @var{b})} @tab @code{MQMACHS @var{a},@var{b},@var{c}} @item @code{void __MQMACHU (acc, uw2, uw2)} @tab @code{__MQMACHU (@var{c}, @var{a}, @var{b})} @tab @code{MQMACHU @var{a},@var{b},@var{c}} @item @code{void __MQMACXHS (acc, sw2, sw2)} @tab @code{__MQMACXHS (@var{c}, @var{a}, @var{b})} @tab @code{MQMACXHS @var{a},@var{b},@var{c}} @item @code{void __MQMULHS (acc, sw2, sw2)} @tab @code{__MQMULHS (@var{c}, @var{a}, @var{b})} @tab @code{MQMULHS @var{a},@var{b},@var{c}} @item @code{void __MQMULHU (acc, uw2, uw2)} @tab @code{__MQMULHU (@var{c}, @var{a}, @var{b})} @tab @code{MQMULHU @var{a},@var{b},@var{c}} @item @code{void __MQMULXHS (acc, sw2, sw2)} @tab @code{__MQMULXHS (@var{c}, @var{a}, @var{b})} @tab @code{MQMULXHS @var{a},@var{b},@var{c}} @item @code{void __MQMULXHU (acc, uw2, uw2)} @tab @code{__MQMULXHU (@var{c}, @var{a}, @var{b})} @tab @code{MQMULXHU @var{a},@var{b},@var{c}} @item @code{sw2 __MQSATHS (sw2, sw2)} @tab @code{@var{c} = __MQSATHS (@var{a}, @var{b})} @tab @code{MQSATHS @var{a},@var{b},@var{c}} @item @code{uw2 __MQSLLHI (uw2, int)} @tab @code{@var{c} = __MQSLLHI (@var{a}, @var{b})} @tab @code{MQSLLHI @var{a},@var{b},@var{c}} @item @code{sw2 __MQSRAHI (sw2, int)} @tab @code{@var{c} = __MQSRAHI (@var{a}, @var{b})} @tab @code{MQSRAHI @var{a},@var{b},@var{c}} @item @code{sw2 __MQSUBHSS (sw2, sw2)} @tab @code{@var{c} = __MQSUBHSS (@var{a}, @var{b})} @tab @code{MQSUBHSS @var{a},@var{b},@var{c}} @item @code{uw2 __MQSUBHUS (uw2, uw2)} @tab @code{@var{c} = __MQSUBHUS (@var{a}, @var{b})} @tab @code{MQSUBHUS @var{a},@var{b},@var{c}} @item @code{void __MQXMACHS (acc, sw2, sw2)} @tab @code{__MQXMACHS (@var{c}, @var{a}, @var{b})} @tab @code{MQXMACHS @var{a},@var{b},@var{c}} @item @code{void __MQXMACXHS (acc, sw2, sw2)} @tab @code{__MQXMACXHS (@var{c}, @var{a}, @var{b})} @tab @code{MQXMACXHS @var{a},@var{b},@var{c}} @item @code{uw1 __MRDACC (acc)} @tab @code{@var{b} = __MRDACC (@var{a})} @tab @code{MRDACC @var{a},@var{b}} @item @code{uw1 __MRDACCG (acc)} @tab @code{@var{b} = __MRDACCG (@var{a})} @tab @code{MRDACCG @var{a},@var{b}} @item @code{uw1 __MROTLI (uw1, const)} @tab @code{@var{c} = __MROTLI (@var{a}, @var{b})} @tab @code{MROTLI @var{a},#@var{b},@var{c}} @item @code{uw1 __MROTRI (uw1, const)} @tab @code{@var{c} = __MROTRI (@var{a}, @var{b})} @tab @code{MROTRI @var{a},#@var{b},@var{c}} @item @code{sw1 __MSATHS (sw1, sw1)} @tab @code{@var{c} = __MSATHS (@var{a}, @var{b})} @tab @code{MSATHS @var{a},@var{b},@var{c}} @item @code{uw1 __MSATHU (uw1, uw1)} @tab @code{@var{c} = __MSATHU (@var{a}, @var{b})} @tab @code{MSATHU @var{a},@var{b},@var{c}} @item @code{uw1 __MSLLHI (uw1, const)} @tab @code{@var{c} = __MSLLHI (@var{a}, @var{b})} @tab @code{MSLLHI @var{a},#@var{b},@var{c}} @item @code{sw1 __MSRAHI (sw1, const)} @tab @code{@var{c} = __MSRAHI (@var{a}, @var{b})} @tab @code{MSRAHI @var{a},#@var{b},@var{c}} @item @code{uw1 __MSRLHI (uw1, const)} @tab @code{@var{c} = __MSRLHI (@var{a}, @var{b})} @tab @code{MSRLHI @var{a},#@var{b},@var{c}} @item @code{void __MSUBACCS (acc, acc)} @tab @code{__MSUBACCS (@var{b}, @var{a})} @tab @code{MSUBACCS @var{a},@var{b}} @item @code{sw1 __MSUBHSS (sw1, sw1)} @tab @code{@var{c} = __MSUBHSS (@var{a}, @var{b})} @tab @code{MSUBHSS @var{a},@var{b},@var{c}} @item @code{uw1 __MSUBHUS (uw1, uw1)} @tab @code{@var{c} = __MSUBHUS (@var{a}, @var{b})} @tab @code{MSUBHUS @var{a},@var{b},@var{c}} @item @code{void __MTRAP (void)} @tab @code{__MTRAP ()} @tab @code{MTRAP} @item @code{uw2 __MUNPACKH (uw1)} @tab @code{@var{b} = __MUNPACKH (@var{a})} @tab @code{MUNPACKH @var{a},@var{b}} @item @code{uw1 __MWCUT (uw2, uw1)} @tab @code{@var{c} = __MWCUT (@var{a}, @var{b})} @tab @code{MWCUT @var{a},@var{b},@var{c}} @item @code{void __MWTACC (acc, uw1)} @tab @code{__MWTACC (@var{b}, @var{a})} @tab @code{MWTACC @var{a},@var{b}} @item @code{void __MWTACCG (acc, uw1)} @tab @code{__MWTACCG (@var{b}, @var{a})} @tab @code{MWTACCG @var{a},@var{b}} @item @code{uw1 __MXOR (uw1, uw1)} @tab @code{@var{c} = __MXOR (@var{a}, @var{b})} @tab @code{MXOR @var{a},@var{b},@var{c}} @end multitable @node Raw read/write Functions @subsubsection Raw read/write Functions This sections describes built-in functions related to read and write instructions to access memory. These functions generate @code{membar} instructions to flush the I/O load and stores where appropriate, as described in Fujitsu's manual described above. @table @code @item unsigned char __builtin_read8 (void *@var{data}) @item unsigned short __builtin_read16 (void *@var{data}) @item unsigned long __builtin_read32 (void *@var{data}) @item unsigned long long __builtin_read64 (void *@var{data}) @item void __builtin_write8 (void *@var{data}, unsigned char @var{datum}) @item void __builtin_write16 (void *@var{data}, unsigned short @var{datum}) @item void __builtin_write32 (void *@var{data}, unsigned long @var{datum}) @item void __builtin_write64 (void *@var{data}, unsigned long long @var{datum}) @end table @node Other Built-in Functions @subsubsection Other Built-in Functions This section describes built-in functions that are not named after a specific FR-V instruction. @table @code @item sw2 __IACCreadll (iacc @var{reg}) Return the full 64-bit value of IACC0@. The @var{reg} argument is reserved for future expansion and must be 0. @item sw1 __IACCreadl (iacc @var{reg}) Return the value of IACC0H if @var{reg} is 0 and IACC0L if @var{reg} is 1. Other values of @var{reg} are rejected as invalid. @item void __IACCsetll (iacc @var{reg}, sw2 @var{x}) Set the full 64-bit value of IACC0 to @var{x}. The @var{reg} argument is reserved for future expansion and must be 0. @item void __IACCsetl (iacc @var{reg}, sw1 @var{x}) Set IACC0H to @var{x} if @var{reg} is 0 and IACC0L to @var{x} if @var{reg} is 1. Other values of @var{reg} are rejected as invalid. @item void __data_prefetch0 (const void *@var{x}) Use the @code{dcpl} instruction to load the contents of address @var{x} into the data cache. @item void __data_prefetch (const void *@var{x}) Use the @code{nldub} instruction to load the contents of address @var{x} into the data cache. The instruction will be issued in slot I1@. @end table @node X86 Built-in Functions @subsection X86 Built-in Functions These built-in functions are available for the i386 and x86-64 family of computers, depending on the command-line switches used. Note that, if you specify command-line switches such as @option{-msse}, the compiler could use the extended instruction sets even if the built-ins are not used explicitly in the program. For this reason, applications which perform runtime CPU detection must compile separate files for each supported architecture, using the appropriate flags. In particular, the file containing the CPU detection code should be compiled without these options. The following machine modes are available for use with MMX built-in functions (@pxref{Vector Extensions}): @code{V2SI} for a vector of two 32-bit integers, @code{V4HI} for a vector of four 16-bit integers, and @code{V8QI} for a vector of eight 8-bit integers. Some of the built-in functions operate on MMX registers as a whole 64-bit entity, these use @code{DI} as their mode. If 3Dnow extensions are enabled, @code{V2SF} is used as a mode for a vector of two 32-bit floating point values. If SSE extensions are enabled, @code{V4SF} is used for a vector of four 32-bit floating point values. Some instructions use a vector of four 32-bit integers, these use @code{V4SI}. Finally, some instructions operate on an entire vector register, interpreting it as a 128-bit integer, these use mode @code{TI}. The following built-in functions are made available by @option{-mmmx}. All of them generate the machine instruction that is part of the name. @smallexample v8qi __builtin_ia32_paddb (v8qi, v8qi) v4hi __builtin_ia32_paddw (v4hi, v4hi) v2si __builtin_ia32_paddd (v2si, v2si) v8qi __builtin_ia32_psubb (v8qi, v8qi) v4hi __builtin_ia32_psubw (v4hi, v4hi) v2si __builtin_ia32_psubd (v2si, v2si) v8qi __builtin_ia32_paddsb (v8qi, v8qi) v4hi __builtin_ia32_paddsw (v4hi, v4hi) v8qi __builtin_ia32_psubsb (v8qi, v8qi) v4hi __builtin_ia32_psubsw (v4hi, v4hi) v8qi __builtin_ia32_paddusb (v8qi, v8qi) v4hi __builtin_ia32_paddusw (v4hi, v4hi) v8qi __builtin_ia32_psubusb (v8qi, v8qi) v4hi __builtin_ia32_psubusw (v4hi, v4hi) v4hi __builtin_ia32_pmullw (v4hi, v4hi) v4hi __builtin_ia32_pmulhw (v4hi, v4hi) di __builtin_ia32_pand (di, di) di __builtin_ia32_pandn (di,di) di __builtin_ia32_por (di, di) di __builtin_ia32_pxor (di, di) v8qi __builtin_ia32_pcmpeqb (v8qi, v8qi) v4hi __builtin_ia32_pcmpeqw (v4hi, v4hi) v2si __builtin_ia32_pcmpeqd (v2si, v2si) v8qi __builtin_ia32_pcmpgtb (v8qi, v8qi) v4hi __builtin_ia32_pcmpgtw (v4hi, v4hi) v2si __builtin_ia32_pcmpgtd (v2si, v2si) v8qi __builtin_ia32_punpckhbw (v8qi, v8qi) v4hi __builtin_ia32_punpckhwd (v4hi, v4hi) v2si __builtin_ia32_punpckhdq (v2si, v2si) v8qi __builtin_ia32_punpcklbw (v8qi, v8qi) v4hi __builtin_ia32_punpcklwd (v4hi, v4hi) v2si __builtin_ia32_punpckldq (v2si, v2si) v8qi __builtin_ia32_packsswb (v4hi, v4hi) v4hi __builtin_ia32_packssdw (v2si, v2si) v8qi __builtin_ia32_packuswb (v4hi, v4hi) @end smallexample The following built-in functions are made available either with @option{-msse}, or with a combination of @option{-m3dnow} and @option{-march=athlon}. All of them generate the machine instruction that is part of the name. @smallexample v4hi __builtin_ia32_pmulhuw (v4hi, v4hi) v8qi __builtin_ia32_pavgb (v8qi, v8qi) v4hi __builtin_ia32_pavgw (v4hi, v4hi) v4hi __builtin_ia32_psadbw (v8qi, v8qi) v8qi __builtin_ia32_pmaxub (v8qi, v8qi) v4hi __builtin_ia32_pmaxsw (v4hi, v4hi) v8qi __builtin_ia32_pminub (v8qi, v8qi) v4hi __builtin_ia32_pminsw (v4hi, v4hi) int __builtin_ia32_pextrw (v4hi, int) v4hi __builtin_ia32_pinsrw (v4hi, int, int) int __builtin_ia32_pmovmskb (v8qi) void __builtin_ia32_maskmovq (v8qi, v8qi, char *) void __builtin_ia32_movntq (di *, di) void __builtin_ia32_sfence (void) @end smallexample The following built-in functions are available when @option{-msse} is used. All of them generate the machine instruction that is part of the name. @smallexample int __builtin_ia32_comieq (v4sf, v4sf) int __builtin_ia32_comineq (v4sf, v4sf) int __builtin_ia32_comilt (v4sf, v4sf) int __builtin_ia32_comile (v4sf, v4sf) int __builtin_ia32_comigt (v4sf, v4sf) int __builtin_ia32_comige (v4sf, v4sf) int __builtin_ia32_ucomieq (v4sf, v4sf) int __builtin_ia32_ucomineq (v4sf, v4sf) int __builtin_ia32_ucomilt (v4sf, v4sf) int __builtin_ia32_ucomile (v4sf, v4sf) int __builtin_ia32_ucomigt (v4sf, v4sf) int __builtin_ia32_ucomige (v4sf, v4sf) v4sf __builtin_ia32_addps (v4sf, v4sf) v4sf __builtin_ia32_subps (v4sf, v4sf) v4sf __builtin_ia32_mulps (v4sf, v4sf) v4sf __builtin_ia32_divps (v4sf, v4sf) v4sf __builtin_ia32_addss (v4sf, v4sf) v4sf __builtin_ia32_subss (v4sf, v4sf) v4sf __builtin_ia32_mulss (v4sf, v4sf) v4sf __builtin_ia32_divss (v4sf, v4sf) v4si __builtin_ia32_cmpeqps (v4sf, v4sf) v4si __builtin_ia32_cmpltps (v4sf, v4sf) v4si __builtin_ia32_cmpleps (v4sf, v4sf) v4si __builtin_ia32_cmpgtps (v4sf, v4sf) v4si __builtin_ia32_cmpgeps (v4sf, v4sf) v4si __builtin_ia32_cmpunordps (v4sf, v4sf) v4si __builtin_ia32_cmpneqps (v4sf, v4sf) v4si __builtin_ia32_cmpnltps (v4sf, v4sf) v4si __builtin_ia32_cmpnleps (v4sf, v4sf) v4si __builtin_ia32_cmpngtps (v4sf, v4sf) v4si __builtin_ia32_cmpngeps (v4sf, v4sf) v4si __builtin_ia32_cmpordps (v4sf, v4sf) v4si __builtin_ia32_cmpeqss (v4sf, v4sf) v4si __builtin_ia32_cmpltss (v4sf, v4sf) v4si __builtin_ia32_cmpless (v4sf, v4sf) v4si __builtin_ia32_cmpunordss (v4sf, v4sf) v4si __builtin_ia32_cmpneqss (v4sf, v4sf) v4si __builtin_ia32_cmpnlts (v4sf, v4sf) v4si __builtin_ia32_cmpnless (v4sf, v4sf) v4si __builtin_ia32_cmpordss (v4sf, v4sf) v4sf __builtin_ia32_maxps (v4sf, v4sf) v4sf __builtin_ia32_maxss (v4sf, v4sf) v4sf __builtin_ia32_minps (v4sf, v4sf) v4sf __builtin_ia32_minss (v4sf, v4sf) v4sf __builtin_ia32_andps (v4sf, v4sf) v4sf __builtin_ia32_andnps (v4sf, v4sf) v4sf __builtin_ia32_orps (v4sf, v4sf) v4sf __builtin_ia32_xorps (v4sf, v4sf) v4sf __builtin_ia32_movss (v4sf, v4sf) v4sf __builtin_ia32_movhlps (v4sf, v4sf) v4sf __builtin_ia32_movlhps (v4sf, v4sf) v4sf __builtin_ia32_unpckhps (v4sf, v4sf) v4sf __builtin_ia32_unpcklps (v4sf, v4sf) v4sf __builtin_ia32_cvtpi2ps (v4sf, v2si) v4sf __builtin_ia32_cvtsi2ss (v4sf, int) v2si __builtin_ia32_cvtps2pi (v4sf) int __builtin_ia32_cvtss2si (v4sf) v2si __builtin_ia32_cvttps2pi (v4sf) int __builtin_ia32_cvttss2si (v4sf) v4sf __builtin_ia32_rcpps (v4sf) v4sf __builtin_ia32_rsqrtps (v4sf) v4sf __builtin_ia32_sqrtps (v4sf) v4sf __builtin_ia32_rcpss (v4sf) v4sf __builtin_ia32_rsqrtss (v4sf) v4sf __builtin_ia32_sqrtss (v4sf) v4sf __builtin_ia32_shufps (v4sf, v4sf, int) void __builtin_ia32_movntps (float *, v4sf) int __builtin_ia32_movmskps (v4sf) @end smallexample The following built-in functions are available when @option{-msse} is used. @table @code @item v4sf __builtin_ia32_loadaps (float *) Generates the @code{movaps} machine instruction as a load from memory. @item void __builtin_ia32_storeaps (float *, v4sf) Generates the @code{movaps} machine instruction as a store to memory. @item v4sf __builtin_ia32_loadups (float *) Generates the @code{movups} machine instruction as a load from memory. @item void __builtin_ia32_storeups (float *, v4sf) Generates the @code{movups} machine instruction as a store to memory. @item v4sf __builtin_ia32_loadsss (float *) Generates the @code{movss} machine instruction as a load from memory. @item void __builtin_ia32_storess (float *, v4sf) Generates the @code{movss} machine instruction as a store to memory. @item v4sf __builtin_ia32_loadhps (v4sf, v2si *) Generates the @code{movhps} machine instruction as a load from memory. @item v4sf __builtin_ia32_loadlps (v4sf, v2si *) Generates the @code{movlps} machine instruction as a load from memory @item void __builtin_ia32_storehps (v4sf, v2si *) Generates the @code{movhps} machine instruction as a store to memory. @item void __builtin_ia32_storelps (v4sf, v2si *) Generates the @code{movlps} machine instruction as a store to memory. @end table The following built-in functions are available when @option{-msse2} is used. All of them generate the machine instruction that is part of the name. @smallexample int __builtin_ia32_comisdeq (v2df, v2df) int __builtin_ia32_comisdlt (v2df, v2df) int __builtin_ia32_comisdle (v2df, v2df) int __builtin_ia32_comisdgt (v2df, v2df) int __builtin_ia32_comisdge (v2df, v2df) int __builtin_ia32_comisdneq (v2df, v2df) int __builtin_ia32_ucomisdeq (v2df, v2df) int __builtin_ia32_ucomisdlt (v2df, v2df) int __builtin_ia32_ucomisdle (v2df, v2df) int __builtin_ia32_ucomisdgt (v2df, v2df) int __builtin_ia32_ucomisdge (v2df, v2df) int __builtin_ia32_ucomisdneq (v2df, v2df) v2df __builtin_ia32_cmpeqpd (v2df, v2df) v2df __builtin_ia32_cmpltpd (v2df, v2df) v2df __builtin_ia32_cmplepd (v2df, v2df) v2df __builtin_ia32_cmpgtpd (v2df, v2df) v2df __builtin_ia32_cmpgepd (v2df, v2df) v2df __builtin_ia32_cmpunordpd (v2df, v2df) v2df __builtin_ia32_cmpneqpd (v2df, v2df) v2df __builtin_ia32_cmpnltpd (v2df, v2df) v2df __builtin_ia32_cmpnlepd (v2df, v2df) v2df __builtin_ia32_cmpngtpd (v2df, v2df) v2df __builtin_ia32_cmpngepd (v2df, v2df) v2df __builtin_ia32_cmpordpd (v2df, v2df) v2df __builtin_ia32_cmpeqsd (v2df, v2df) v2df __builtin_ia32_cmpltsd (v2df, v2df) v2df __builtin_ia32_cmplesd (v2df, v2df) v2df __builtin_ia32_cmpunordsd (v2df, v2df) v2df __builtin_ia32_cmpneqsd (v2df, v2df) v2df __builtin_ia32_cmpnltsd (v2df, v2df) v2df __builtin_ia32_cmpnlesd (v2df, v2df) v2df __builtin_ia32_cmpordsd (v2df, v2df) v2di __builtin_ia32_paddq (v2di, v2di) v2di __builtin_ia32_psubq (v2di, v2di) v2df __builtin_ia32_addpd (v2df, v2df) v2df __builtin_ia32_subpd (v2df, v2df) v2df __builtin_ia32_mulpd (v2df, v2df) v2df __builtin_ia32_divpd (v2df, v2df) v2df __builtin_ia32_addsd (v2df, v2df) v2df __builtin_ia32_subsd (v2df, v2df) v2df __builtin_ia32_mulsd (v2df, v2df) v2df __builtin_ia32_divsd (v2df, v2df) v2df __builtin_ia32_minpd (v2df, v2df) v2df __builtin_ia32_maxpd (v2df, v2df) v2df __builtin_ia32_minsd (v2df, v2df) v2df __builtin_ia32_maxsd (v2df, v2df) v2df __builtin_ia32_andpd (v2df, v2df) v2df __builtin_ia32_andnpd (v2df, v2df) v2df __builtin_ia32_orpd (v2df, v2df) v2df __builtin_ia32_xorpd (v2df, v2df) v2df __builtin_ia32_movsd (v2df, v2df) v2df __builtin_ia32_unpckhpd (v2df, v2df) v2df __builtin_ia32_unpcklpd (v2df, v2df) v16qi __builtin_ia32_paddb128 (v16qi, v16qi) v8hi __builtin_ia32_paddw128 (v8hi, v8hi) v4si __builtin_ia32_paddd128 (v4si, v4si) v2di __builtin_ia32_paddq128 (v2di, v2di) v16qi __builtin_ia32_psubb128 (v16qi, v16qi) v8hi __builtin_ia32_psubw128 (v8hi, v8hi) v4si __builtin_ia32_psubd128 (v4si, v4si) v2di __builtin_ia32_psubq128 (v2di, v2di) v8hi __builtin_ia32_pmullw128 (v8hi, v8hi) v8hi __builtin_ia32_pmulhw128 (v8hi, v8hi) v2di __builtin_ia32_pand128 (v2di, v2di) v2di __builtin_ia32_pandn128 (v2di, v2di) v2di __builtin_ia32_por128 (v2di, v2di) v2di __builtin_ia32_pxor128 (v2di, v2di) v16qi __builtin_ia32_pavgb128 (v16qi, v16qi) v8hi __builtin_ia32_pavgw128 (v8hi, v8hi) v16qi __builtin_ia32_pcmpeqb128 (v16qi, v16qi) v8hi __builtin_ia32_pcmpeqw128 (v8hi, v8hi) v4si __builtin_ia32_pcmpeqd128 (v4si, v4si) v16qi __builtin_ia32_pcmpgtb128 (v16qi, v16qi) v8hi __builtin_ia32_pcmpgtw128 (v8hi, v8hi) v4si __builtin_ia32_pcmpgtd128 (v4si, v4si) v16qi __builtin_ia32_pmaxub128 (v16qi, v16qi) v8hi __builtin_ia32_pmaxsw128 (v8hi, v8hi) v16qi __builtin_ia32_pminub128 (v16qi, v16qi) v8hi __builtin_ia32_pminsw128 (v8hi, v8hi) v16qi __builtin_ia32_punpckhbw128 (v16qi, v16qi) v8hi __builtin_ia32_punpckhwd128 (v8hi, v8hi) v4si __builtin_ia32_punpckhdq128 (v4si, v4si) v2di __builtin_ia32_punpckhqdq128 (v2di, v2di) v16qi __builtin_ia32_punpcklbw128 (v16qi, v16qi) v8hi __builtin_ia32_punpcklwd128 (v8hi, v8hi) v4si __builtin_ia32_punpckldq128 (v4si, v4si) v2di __builtin_ia32_punpcklqdq128 (v2di, v2di) v16qi __builtin_ia32_packsswb128 (v16qi, v16qi) v8hi __builtin_ia32_packssdw128 (v8hi, v8hi) v16qi __builtin_ia32_packuswb128 (v16qi, v16qi) v8hi __builtin_ia32_pmulhuw128 (v8hi, v8hi) void __builtin_ia32_maskmovdqu (v16qi, v16qi) v2df __builtin_ia32_loadupd (double *) void __builtin_ia32_storeupd (double *, v2df) v2df __builtin_ia32_loadhpd (v2df, double *) v2df __builtin_ia32_loadlpd (v2df, double *) int __builtin_ia32_movmskpd (v2df) int __builtin_ia32_pmovmskb128 (v16qi) void __builtin_ia32_movnti (int *, int) void __builtin_ia32_movntpd (double *, v2df) void __builtin_ia32_movntdq (v2df *, v2df) v4si __builtin_ia32_pshufd (v4si, int) v8hi __builtin_ia32_pshuflw (v8hi, int) v8hi __builtin_ia32_pshufhw (v8hi, int) v2di __builtin_ia32_psadbw128 (v16qi, v16qi) v2df __builtin_ia32_sqrtpd (v2df) v2df __builtin_ia32_sqrtsd (v2df) v2df __builtin_ia32_shufpd (v2df, v2df, int) v2df __builtin_ia32_cvtdq2pd (v4si) v4sf __builtin_ia32_cvtdq2ps (v4si) v4si __builtin_ia32_cvtpd2dq (v2df) v2si __builtin_ia32_cvtpd2pi (v2df) v4sf __builtin_ia32_cvtpd2ps (v2df) v4si __builtin_ia32_cvttpd2dq (v2df) v2si __builtin_ia32_cvttpd2pi (v2df) v2df __builtin_ia32_cvtpi2pd (v2si) int __builtin_ia32_cvtsd2si (v2df) int __builtin_ia32_cvttsd2si (v2df) long long __builtin_ia32_cvtsd2si64 (v2df) long long __builtin_ia32_cvttsd2si64 (v2df) v4si __builtin_ia32_cvtps2dq (v4sf) v2df __builtin_ia32_cvtps2pd (v4sf) v4si __builtin_ia32_cvttps2dq (v4sf) v2df __builtin_ia32_cvtsi2sd (v2df, int) v2df __builtin_ia32_cvtsi642sd (v2df, long long) v4sf __builtin_ia32_cvtsd2ss (v4sf, v2df) v2df __builtin_ia32_cvtss2sd (v2df, v4sf) void __builtin_ia32_clflush (const void *) void __builtin_ia32_lfence (void) void __builtin_ia32_mfence (void) v16qi __builtin_ia32_loaddqu (const char *) void __builtin_ia32_storedqu (char *, v16qi) unsigned long long __builtin_ia32_pmuludq (v2si, v2si) v2di __builtin_ia32_pmuludq128 (v4si, v4si) v8hi __builtin_ia32_psllw128 (v8hi, v2di) v4si __builtin_ia32_pslld128 (v4si, v2di) v2di __builtin_ia32_psllq128 (v4si, v2di) v8hi __builtin_ia32_psrlw128 (v8hi, v2di) v4si __builtin_ia32_psrld128 (v4si, v2di) v2di __builtin_ia32_psrlq128 (v2di, v2di) v8hi __builtin_ia32_psraw128 (v8hi, v2di) v4si __builtin_ia32_psrad128 (v4si, v2di) v2di __builtin_ia32_pslldqi128 (v2di, int) v8hi __builtin_ia32_psllwi128 (v8hi, int) v4si __builtin_ia32_pslldi128 (v4si, int) v2di __builtin_ia32_psllqi128 (v2di, int) v2di __builtin_ia32_psrldqi128 (v2di, int) v8hi __builtin_ia32_psrlwi128 (v8hi, int) v4si __builtin_ia32_psrldi128 (v4si, int) v2di __builtin_ia32_psrlqi128 (v2di, int) v8hi __builtin_ia32_psrawi128 (v8hi, int) v4si __builtin_ia32_psradi128 (v4si, int) v4si __builtin_ia32_pmaddwd128 (v8hi, v8hi) @end smallexample The following built-in functions are available when @option{-msse3} is used. All of them generate the machine instruction that is part of the name. @smallexample v2df __builtin_ia32_addsubpd (v2df, v2df) v4sf __builtin_ia32_addsubps (v4sf, v4sf) v2df __builtin_ia32_haddpd (v2df, v2df) v4sf __builtin_ia32_haddps (v4sf, v4sf) v2df __builtin_ia32_hsubpd (v2df, v2df) v4sf __builtin_ia32_hsubps (v4sf, v4sf) v16qi __builtin_ia32_lddqu (char const *) void __builtin_ia32_monitor (void *, unsigned int, unsigned int) v2df __builtin_ia32_movddup (v2df) v4sf __builtin_ia32_movshdup (v4sf) v4sf __builtin_ia32_movsldup (v4sf) void __builtin_ia32_mwait (unsigned int, unsigned int) @end smallexample The following built-in functions are available when @option{-msse3} is used. @table @code @item v2df __builtin_ia32_loadddup (double const *) Generates the @code{movddup} machine instruction as a load from memory. @end table The following built-in functions are available when @option{-mssse3} is used. All of them generate the machine instruction that is part of the name with MMX registers. @smallexample v2si __builtin_ia32_phaddd (v2si, v2si) v4hi __builtin_ia32_phaddw (v4hi, v4hi) v4hi __builtin_ia32_phaddsw (v4hi, v4hi) v2si __builtin_ia32_phsubd (v2si, v2si) v4hi __builtin_ia32_phsubw (v4hi, v4hi) v4hi __builtin_ia32_phsubsw (v4hi, v4hi) v8qi __builtin_ia32_pmaddubsw (v8qi, v8qi) v4hi __builtin_ia32_pmulhrsw (v4hi, v4hi) v8qi __builtin_ia32_pshufb (v8qi, v8qi) v8qi __builtin_ia32_psignb (v8qi, v8qi) v2si __builtin_ia32_psignd (v2si, v2si) v4hi __builtin_ia32_psignw (v4hi, v4hi) long long __builtin_ia32_palignr (long long, long long, int) v8qi __builtin_ia32_pabsb (v8qi) v2si __builtin_ia32_pabsd (v2si) v4hi __builtin_ia32_pabsw (v4hi) @end smallexample The following built-in functions are available when @option{-mssse3} is used. All of them generate the machine instruction that is part of the name with SSE registers. @smallexample v4si __builtin_ia32_phaddd128 (v4si, v4si) v8hi __builtin_ia32_phaddw128 (v8hi, v8hi) v8hi __builtin_ia32_phaddsw128 (v8hi, v8hi) v4si __builtin_ia32_phsubd128 (v4si, v4si) v8hi __builtin_ia32_phsubw128 (v8hi, v8hi) v8hi __builtin_ia32_phsubsw128 (v8hi, v8hi) v16qi __builtin_ia32_pmaddubsw128 (v16qi, v16qi) v8hi __builtin_ia32_pmulhrsw128 (v8hi, v8hi) v16qi __builtin_ia32_pshufb128 (v16qi, v16qi) v16qi __builtin_ia32_psignb128 (v16qi, v16qi) v4si __builtin_ia32_psignd128 (v4si, v4si) v8hi __builtin_ia32_psignw128 (v8hi, v8hi) v2di __builtin_ia32_palignr (v2di, v2di, int) v16qi __builtin_ia32_pabsb128 (v16qi) v4si __builtin_ia32_pabsd128 (v4si) v8hi __builtin_ia32_pabsw128 (v8hi) @end smallexample The following built-in functions are available when @option{-msse4a} is used. @smallexample void _mm_stream_sd (double*,__m128d); Generates the @code{movntsd} machine instruction. void _mm_stream_ss (float*,__m128); Generates the @code{movntss} machine instruction. __m128i _mm_extract_si64 (__m128i, __m128i); Generates the @code{extrq} machine instruction with only SSE register operands. __m128i _mm_extracti_si64 (__m128i, int, int); Generates the @code{extrq} machine instruction with SSE register and immediate operands. __m128i _mm_insert_si64 (__m128i, __m128i); Generates the @code{insertq} machine instruction with only SSE register operands. __m128i _mm_inserti_si64 (__m128i, __m128i, int, int); Generates the @code{insertq} machine instruction with SSE register and immediate operands. @end smallexample The following built-in functions are available when @option{-m3dnow} is used. All of them generate the machine instruction that is part of the name. @smallexample void __builtin_ia32_femms (void) v8qi __builtin_ia32_pavgusb (v8qi, v8qi) v2si __builtin_ia32_pf2id (v2sf) v2sf __builtin_ia32_pfacc (v2sf, v2sf) v2sf __builtin_ia32_pfadd (v2sf, v2sf) v2si __builtin_ia32_pfcmpeq (v2sf, v2sf) v2si __builtin_ia32_pfcmpge (v2sf, v2sf) v2si __builtin_ia32_pfcmpgt (v2sf, v2sf) v2sf __builtin_ia32_pfmax (v2sf, v2sf) v2sf __builtin_ia32_pfmin (v2sf, v2sf) v2sf __builtin_ia32_pfmul (v2sf, v2sf) v2sf __builtin_ia32_pfrcp (v2sf) v2sf __builtin_ia32_pfrcpit1 (v2sf, v2sf) v2sf __builtin_ia32_pfrcpit2 (v2sf, v2sf) v2sf __builtin_ia32_pfrsqrt (v2sf) v2sf __builtin_ia32_pfrsqrtit1 (v2sf, v2sf) v2sf __builtin_ia32_pfsub (v2sf, v2sf) v2sf __builtin_ia32_pfsubr (v2sf, v2sf) v2sf __builtin_ia32_pi2fd (v2si) v4hi __builtin_ia32_pmulhrw (v4hi, v4hi) @end smallexample The following built-in functions are available when both @option{-m3dnow} and @option{-march=athlon} are used. All of them generate the machine instruction that is part of the name. @smallexample v2si __builtin_ia32_pf2iw (v2sf) v2sf __builtin_ia32_pfnacc (v2sf, v2sf) v2sf __builtin_ia32_pfpnacc (v2sf, v2sf) v2sf __builtin_ia32_pi2fw (v2si) v2sf __builtin_ia32_pswapdsf (v2sf) v2si __builtin_ia32_pswapdsi (v2si) @end smallexample @node MIPS DSP Built-in Functions @subsection MIPS DSP Built-in Functions The MIPS DSP Application-Specific Extension (ASE) includes new instructions that are designed to improve the performance of DSP and media applications. It provides instructions that operate on packed 8-bit integer data, Q15 fractional data and Q31 fractional data. GCC supports MIPS DSP operations using both the generic vector extensions (@pxref{Vector Extensions}) and a collection of MIPS-specific built-in functions. Both kinds of support are enabled by the @option{-mdsp} command-line option. At present, GCC only provides support for operations on 32-bit vectors. The vector type associated with 8-bit integer data is usually called @code{v4i8} and the vector type associated with Q15 is usually called @code{v2q15}. They can be defined in C as follows: @smallexample typedef char v4i8 __attribute__ ((vector_size(4))); typedef short v2q15 __attribute__ ((vector_size(4))); @end smallexample @code{v4i8} and @code{v2q15} values are initialized in the same way as aggregates. For example: @smallexample v4i8 a = @{1, 2, 3, 4@}; v4i8 b; b = (v4i8) @{5, 6, 7, 8@}; v2q15 c = @{0x0fcb, 0x3a75@}; v2q15 d; d = (v2q15) @{0.1234 * 0x1.0p15, 0.4567 * 0x1.0p15@}; @end smallexample @emph{Note:} The CPU's endianness determines the order in which values are packed. On little-endian targets, the first value is the least significant and the last value is the most significant. The opposite order applies to big-endian targets. For example, the code above will set the lowest byte of @code{a} to @code{1} on little-endian targets and @code{4} on big-endian targets. @emph{Note:} Q15 and Q31 values must be initialized with their integer representation. As shown in this example, the integer representation of a Q15 value can be obtained by multiplying the fractional value by @code{0x1.0p15}. The equivalent for Q31 values is to multiply by @code{0x1.0p31}. The table below lists the @code{v4i8} and @code{v2q15} operations for which hardware support exists. @code{a} and @code{b} are @code{v4i8} values, and @code{c} and @code{d} are @code{v2q15} values. @multitable @columnfractions .50 .50 @item C code @tab MIPS instruction @item @code{a + b} @tab @code{addu.qb} @item @code{c + d} @tab @code{addq.ph} @item @code{a - b} @tab @code{subu.qb} @item @code{c - d} @tab @code{subq.ph} @end multitable It is easier to describe the DSP built-in functions if we first define the following types: @smallexample typedef int q31; typedef int i32; typedef long long a64; @end smallexample @code{q31} and @code{i32} are actually the same as @code{int}, but we use @code{q31} to indicate a Q31 fractional value and @code{i32} to indicate a 32-bit integer value. Similarly, @code{a64} is the same as @code{long long}, but we use @code{a64} to indicate values that will be placed in one of the four DSP accumulators (@code{$ac0}, @code{$ac1}, @code{$ac2} or @code{$ac3}). Also, some built-in functions prefer or require immediate numbers as parameters, because the corresponding DSP instructions accept both immediate numbers and register operands, or accept immediate numbers only. The immediate parameters are listed as follows. @smallexample imm0_7: 0 to 7. imm0_15: 0 to 15. imm0_31: 0 to 31. imm0_63: 0 to 63. imm0_255: 0 to 255. imm_n32_31: -32 to 31. imm_n512_511: -512 to 511. @end smallexample The following built-in functions map directly to a particular MIPS DSP instruction. Please refer to the architecture specification for details on what each instruction does. @smallexample v2q15 __builtin_mips_addq_ph (v2q15, v2q15) v2q15 __builtin_mips_addq_s_ph (v2q15, v2q15) q31 __builtin_mips_addq_s_w (q31, q31) v4i8 __builtin_mips_addu_qb (v4i8, v4i8) v4i8 __builtin_mips_addu_s_qb (v4i8, v4i8) v2q15 __builtin_mips_subq_ph (v2q15, v2q15) v2q15 __builtin_mips_subq_s_ph (v2q15, v2q15) q31 __builtin_mips_subq_s_w (q31, q31) v4i8 __builtin_mips_subu_qb (v4i8, v4i8) v4i8 __builtin_mips_subu_s_qb (v4i8, v4i8) i32 __builtin_mips_addsc (i32, i32) i32 __builtin_mips_addwc (i32, i32) i32 __builtin_mips_modsub (i32, i32) i32 __builtin_mips_raddu_w_qb (v4i8) v2q15 __builtin_mips_absq_s_ph (v2q15) q31 __builtin_mips_absq_s_w (q31) v4i8 __builtin_mips_precrq_qb_ph (v2q15, v2q15) v2q15 __builtin_mips_precrq_ph_w (q31, q31) v2q15 __builtin_mips_precrq_rs_ph_w (q31, q31) v4i8 __builtin_mips_precrqu_s_qb_ph (v2q15, v2q15) q31 __builtin_mips_preceq_w_phl (v2q15) q31 __builtin_mips_preceq_w_phr (v2q15) v2q15 __builtin_mips_precequ_ph_qbl (v4i8) v2q15 __builtin_mips_precequ_ph_qbr (v4i8) v2q15 __builtin_mips_precequ_ph_qbla (v4i8) v2q15 __builtin_mips_precequ_ph_qbra (v4i8) v2q15 __builtin_mips_preceu_ph_qbl (v4i8) v2q15 __builtin_mips_preceu_ph_qbr (v4i8) v2q15 __builtin_mips_preceu_ph_qbla (v4i8) v2q15 __builtin_mips_preceu_ph_qbra (v4i8) v4i8 __builtin_mips_shll_qb (v4i8, imm0_7) v4i8 __builtin_mips_shll_qb (v4i8, i32) v2q15 __builtin_mips_shll_ph (v2q15, imm0_15) v2q15 __builtin_mips_shll_ph (v2q15, i32) v2q15 __builtin_mips_shll_s_ph (v2q15, imm0_15) v2q15 __builtin_mips_shll_s_ph (v2q15, i32) q31 __builtin_mips_shll_s_w (q31, imm0_31) q31 __builtin_mips_shll_s_w (q31, i32) v4i8 __builtin_mips_shrl_qb (v4i8, imm0_7) v4i8 __builtin_mips_shrl_qb (v4i8, i32) v2q15 __builtin_mips_shra_ph (v2q15, imm0_15) v2q15 __builtin_mips_shra_ph (v2q15, i32) v2q15 __builtin_mips_shra_r_ph (v2q15, imm0_15) v2q15 __builtin_mips_shra_r_ph (v2q15, i32) q31 __builtin_mips_shra_r_w (q31, imm0_31) q31 __builtin_mips_shra_r_w (q31, i32) v2q15 __builtin_mips_muleu_s_ph_qbl (v4i8, v2q15) v2q15 __builtin_mips_muleu_s_ph_qbr (v4i8, v2q15) v2q15 __builtin_mips_mulq_rs_ph (v2q15, v2q15) q31 __builtin_mips_muleq_s_w_phl (v2q15, v2q15) q31 __builtin_mips_muleq_s_w_phr (v2q15, v2q15) a64 __builtin_mips_dpau_h_qbl (a64, v4i8, v4i8) a64 __builtin_mips_dpau_h_qbr (a64, v4i8, v4i8) a64 __builtin_mips_dpsu_h_qbl (a64, v4i8, v4i8) a64 __builtin_mips_dpsu_h_qbr (a64, v4i8, v4i8) a64 __builtin_mips_dpaq_s_w_ph (a64, v2q15, v2q15) a64 __builtin_mips_dpaq_sa_l_w (a64, q31, q31) a64 __builtin_mips_dpsq_s_w_ph (a64, v2q15, v2q15) a64 __builtin_mips_dpsq_sa_l_w (a64, q31, q31) a64 __builtin_mips_mulsaq_s_w_ph (a64, v2q15, v2q15) a64 __builtin_mips_maq_s_w_phl (a64, v2q15, v2q15) a64 __builtin_mips_maq_s_w_phr (a64, v2q15, v2q15) a64 __builtin_mips_maq_sa_w_phl (a64, v2q15, v2q15) a64 __builtin_mips_maq_sa_w_phr (a64, v2q15, v2q15) i32 __builtin_mips_bitrev (i32) i32 __builtin_mips_insv (i32, i32) v4i8 __builtin_mips_repl_qb (imm0_255) v4i8 __builtin_mips_repl_qb (i32) v2q15 __builtin_mips_repl_ph (imm_n512_511) v2q15 __builtin_mips_repl_ph (i32) void __builtin_mips_cmpu_eq_qb (v4i8, v4i8) void __builtin_mips_cmpu_lt_qb (v4i8, v4i8) void __builtin_mips_cmpu_le_qb (v4i8, v4i8) i32 __builtin_mips_cmpgu_eq_qb (v4i8, v4i8) i32 __builtin_mips_cmpgu_lt_qb (v4i8, v4i8) i32 __builtin_mips_cmpgu_le_qb (v4i8, v4i8) void __builtin_mips_cmp_eq_ph (v2q15, v2q15) void __builtin_mips_cmp_lt_ph (v2q15, v2q15) void __builtin_mips_cmp_le_ph (v2q15, v2q15) v4i8 __builtin_mips_pick_qb (v4i8, v4i8) v2q15 __builtin_mips_pick_ph (v2q15, v2q15) v2q15 __builtin_mips_packrl_ph (v2q15, v2q15) i32 __builtin_mips_extr_w (a64, imm0_31) i32 __builtin_mips_extr_w (a64, i32) i32 __builtin_mips_extr_r_w (a64, imm0_31) i32 __builtin_mips_extr_s_h (a64, i32) i32 __builtin_mips_extr_rs_w (a64, imm0_31) i32 __builtin_mips_extr_rs_w (a64, i32) i32 __builtin_mips_extr_s_h (a64, imm0_31) i32 __builtin_mips_extr_r_w (a64, i32) i32 __builtin_mips_extp (a64, imm0_31) i32 __builtin_mips_extp (a64, i32) i32 __builtin_mips_extpdp (a64, imm0_31) i32 __builtin_mips_extpdp (a64, i32) a64 __builtin_mips_shilo (a64, imm_n32_31) a64 __builtin_mips_shilo (a64, i32) a64 __builtin_mips_mthlip (a64, i32) void __builtin_mips_wrdsp (i32, imm0_63) i32 __builtin_mips_rddsp (imm0_63) i32 __builtin_mips_lbux (void *, i32) i32 __builtin_mips_lhx (void *, i32) i32 __builtin_mips_lwx (void *, i32) i32 __builtin_mips_bposge32 (void) @end smallexample @node MIPS Paired-Single Support @subsection MIPS Paired-Single Support The MIPS64 architecture includes a number of instructions that operate on pairs of single-precision floating-point values. Each pair is packed into a 64-bit floating-point register, with one element being designated the ``upper half'' and the other being designated the ``lower half''. GCC supports paired-single operations using both the generic vector extensions (@pxref{Vector Extensions}) and a collection of MIPS-specific built-in functions. Both kinds of support are enabled by the @option{-mpaired-single} command-line option. The vector type associated with paired-single values is usually called @code{v2sf}. It can be defined in C as follows: @smallexample typedef float v2sf __attribute__ ((vector_size (8))); @end smallexample @code{v2sf} values are initialized in the same way as aggregates. For example: @smallexample v2sf a = @{1.5, 9.1@}; v2sf b; float e, f; b = (v2sf) @{e, f@}; @end smallexample @emph{Note:} The CPU's endianness determines which value is stored in the upper half of a register and which value is stored in the lower half. On little-endian targets, the first value is the lower one and the second value is the upper one. The opposite order applies to big-endian targets. For example, the code above will set the lower half of @code{a} to @code{1.5} on little-endian targets and @code{9.1} on big-endian targets. @menu * Paired-Single Arithmetic:: * Paired-Single Built-in Functions:: * MIPS-3D Built-in Functions:: @end menu @node Paired-Single Arithmetic @subsubsection Paired-Single Arithmetic The table below lists the @code{v2sf} operations for which hardware support exists. @code{a}, @code{b} and @code{c} are @code{v2sf} values and @code{x} is an integral value. @multitable @columnfractions .50 .50 @item C code @tab MIPS instruction @item @code{a + b} @tab @code{add.ps} @item @code{a - b} @tab @code{sub.ps} @item @code{-a} @tab @code{neg.ps} @item @code{a * b} @tab @code{mul.ps} @item @code{a * b + c} @tab @code{madd.ps} @item @code{a * b - c} @tab @code{msub.ps} @item @code{-(a * b + c)} @tab @code{nmadd.ps} @item @code{-(a * b - c)} @tab @code{nmsub.ps} @item @code{x ? a : b} @tab @code{movn.ps}/@code{movz.ps} @end multitable Note that the multiply-accumulate instructions can be disabled using the command-line option @code{-mno-fused-madd}. @node Paired-Single Built-in Functions @subsubsection Paired-Single Built-in Functions The following paired-single functions map directly to a particular MIPS instruction. Please refer to the architecture specification for details on what each instruction does. @table @code @item v2sf __builtin_mips_pll_ps (v2sf, v2sf) Pair lower lower (@code{pll.ps}). @item v2sf __builtin_mips_pul_ps (v2sf, v2sf) Pair upper lower (@code{pul.ps}). @item v2sf __builtin_mips_plu_ps (v2sf, v2sf) Pair lower upper (@code{plu.ps}). @item v2sf __builtin_mips_puu_ps (v2sf, v2sf) Pair upper upper (@code{puu.ps}). @item v2sf __builtin_mips_cvt_ps_s (float, float) Convert pair to paired single (@code{cvt.ps.s}). @item float __builtin_mips_cvt_s_pl (v2sf) Convert pair lower to single (@code{cvt.s.pl}). @item float __builtin_mips_cvt_s_pu (v2sf) Convert pair upper to single (@code{cvt.s.pu}). @item v2sf __builtin_mips_abs_ps (v2sf) Absolute value (@code{abs.ps}). @item v2sf __builtin_mips_alnv_ps (v2sf, v2sf, int) Align variable (@code{alnv.ps}). @emph{Note:} The value of the third parameter must be 0 or 4 modulo 8, otherwise the result will be unpredictable. Please read the instruction description for details. @end table The following multi-instruction functions are also available. In each case, @var{cond} can be any of the 16 floating-point conditions: @code{f}, @code{un}, @code{eq}, @code{ueq}, @code{olt}, @code{ult}, @code{ole}, @code{ule}, @code{sf}, @code{ngle}, @code{seq}, @code{ngl}, @code{lt}, @code{nge}, @code{le} or @code{ngt}. @table @code @item v2sf __builtin_mips_movt_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) @itemx v2sf __builtin_mips_movf_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) Conditional move based on floating point comparison (@code{c.@var{cond}.ps}, @code{movt.ps}/@code{movf.ps}). The @code{movt} functions return the value @var{x} computed by: @smallexample c.@var{cond}.ps @var{cc},@var{a},@var{b} mov.ps @var{x},@var{c} movt.ps @var{x},@var{d},@var{cc} @end smallexample The @code{movf} functions are similar but use @code{movf.ps} instead of @code{movt.ps}. @item int __builtin_mips_upper_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) @itemx int __builtin_mips_lower_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) Comparison of two paired-single values (@code{c.@var{cond}.ps}, @code{bc1t}/@code{bc1f}). These functions compare @var{a} and @var{b} using @code{c.@var{cond}.ps} and return either the upper or lower half of the result. For example: @smallexample v2sf a, b; if (__builtin_mips_upper_c_eq_ps (a, b)) upper_halves_are_equal (); else upper_halves_are_unequal (); if (__builtin_mips_lower_c_eq_ps (a, b)) lower_halves_are_equal (); else lower_halves_are_unequal (); @end smallexample @end table @node MIPS-3D Built-in Functions @subsubsection MIPS-3D Built-in Functions The MIPS-3D Application-Specific Extension (ASE) includes additional paired-single instructions that are designed to improve the performance of 3D graphics operations. Support for these instructions is controlled by the @option{-mips3d} command-line option. The functions listed below map directly to a particular MIPS-3D instruction. Please refer to the architecture specification for more details on what each instruction does. @table @code @item v2sf __builtin_mips_addr_ps (v2sf, v2sf) Reduction add (@code{addr.ps}). @item v2sf __builtin_mips_mulr_ps (v2sf, v2sf) Reduction multiply (@code{mulr.ps}). @item v2sf __builtin_mips_cvt_pw_ps (v2sf) Convert paired single to paired word (@code{cvt.pw.ps}). @item v2sf __builtin_mips_cvt_ps_pw (v2sf) Convert paired word to paired single (@code{cvt.ps.pw}). @item float __builtin_mips_recip1_s (float) @itemx double __builtin_mips_recip1_d (double) @itemx v2sf __builtin_mips_recip1_ps (v2sf) Reduced precision reciprocal (sequence step 1) (@code{recip1.@var{fmt}}). @item float __builtin_mips_recip2_s (float, float) @itemx double __builtin_mips_recip2_d (double, double) @itemx v2sf __builtin_mips_recip2_ps (v2sf, v2sf) Reduced precision reciprocal (sequence step 2) (@code{recip2.@var{fmt}}). @item float __builtin_mips_rsqrt1_s (float) @itemx double __builtin_mips_rsqrt1_d (double) @itemx v2sf __builtin_mips_rsqrt1_ps (v2sf) Reduced precision reciprocal square root (sequence step 1) (@code{rsqrt1.@var{fmt}}). @item float __builtin_mips_rsqrt2_s (float, float) @itemx double __builtin_mips_rsqrt2_d (double, double) @itemx v2sf __builtin_mips_rsqrt2_ps (v2sf, v2sf) Reduced precision reciprocal square root (sequence step 2) (@code{rsqrt2.@var{fmt}}). @end table The following multi-instruction functions are also available. In each case, @var{cond} can be any of the 16 floating-point conditions: @code{f}, @code{un}, @code{eq}, @code{ueq}, @code{olt}, @code{ult}, @code{ole}, @code{ule}, @code{sf}, @code{ngle}, @code{seq}, @code{ngl}, @code{lt}, @code{nge}, @code{le} or @code{ngt}. @table @code @item int __builtin_mips_cabs_@var{cond}_s (float @var{a}, float @var{b}) @itemx int __builtin_mips_cabs_@var{cond}_d (double @var{a}, double @var{b}) Absolute comparison of two scalar values (@code{cabs.@var{cond}.@var{fmt}}, @code{bc1t}/@code{bc1f}). These functions compare @var{a} and @var{b} using @code{cabs.@var{cond}.s} or @code{cabs.@var{cond}.d} and return the result as a boolean value. For example: @smallexample float a, b; if (__builtin_mips_cabs_eq_s (a, b)) true (); else false (); @end smallexample @item int __builtin_mips_upper_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) @itemx int __builtin_mips_lower_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) Absolute comparison of two paired-single values (@code{cabs.@var{cond}.ps}, @code{bc1t}/@code{bc1f}). These functions compare @var{a} and @var{b} using @code{cabs.@var{cond}.ps} and return either the upper or lower half of the result. For example: @smallexample v2sf a, b; if (__builtin_mips_upper_cabs_eq_ps (a, b)) upper_halves_are_equal (); else upper_halves_are_unequal (); if (__builtin_mips_lower_cabs_eq_ps (a, b)) lower_halves_are_equal (); else lower_halves_are_unequal (); @end smallexample @item v2sf __builtin_mips_movt_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) @itemx v2sf __builtin_mips_movf_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) Conditional move based on absolute comparison (@code{cabs.@var{cond}.ps}, @code{movt.ps}/@code{movf.ps}). The @code{movt} functions return the value @var{x} computed by: @smallexample cabs.@var{cond}.ps @var{cc},@var{a},@var{b} mov.ps @var{x},@var{c} movt.ps @var{x},@var{d},@var{cc} @end smallexample The @code{movf} functions are similar but use @code{movf.ps} instead of @code{movt.ps}. @item int __builtin_mips_any_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) @itemx int __builtin_mips_all_c_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) @itemx int __builtin_mips_any_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) @itemx int __builtin_mips_all_cabs_@var{cond}_ps (v2sf @var{a}, v2sf @var{b}) Comparison of two paired-single values (@code{c.@var{cond}.ps}/@code{cabs.@var{cond}.ps}, @code{bc1any2t}/@code{bc1any2f}). These functions compare @var{a} and @var{b} using @code{c.@var{cond}.ps} or @code{cabs.@var{cond}.ps}. The @code{any} forms return true if either result is true and the @code{all} forms return true if both results are true. For example: @smallexample v2sf a, b; if (__builtin_mips_any_c_eq_ps (a, b)) one_is_true (); else both_are_false (); if (__builtin_mips_all_c_eq_ps (a, b)) both_are_true (); else one_is_false (); @end smallexample @item int __builtin_mips_any_c_@var{cond}_4s (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) @itemx int __builtin_mips_all_c_@var{cond}_4s (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) @itemx int __builtin_mips_any_cabs_@var{cond}_4s (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) @itemx int __builtin_mips_all_cabs_@var{cond}_4s (v2sf @var{a}, v2sf @var{b}, v2sf @var{c}, v2sf @var{d}) Comparison of four paired-single values (@code{c.@var{cond}.ps}/@code{cabs.@var{cond}.ps}, @code{bc1any4t}/@code{bc1any4f}). These functions use @code{c.@var{cond}.ps} or @code{cabs.@var{cond}.ps} to compare @var{a} with @var{b} and to compare @var{c} with @var{d}. The @code{any} forms return true if any of the four results are true and the @code{all} forms return true if all four results are true. For example: @smallexample v2sf a, b, c, d; if (__builtin_mips_any_c_eq_4s (a, b, c, d)) some_are_true (); else all_are_false (); if (__builtin_mips_all_c_eq_4s (a, b, c, d)) all_are_true (); else some_are_false (); @end smallexample @end table @node PowerPC AltiVec Built-in Functions @subsection PowerPC AltiVec Built-in Functions GCC provides an interface for the PowerPC family of processors to access the AltiVec operations described in Motorola's AltiVec Programming Interface Manual. The interface is made available by including @code{} and using @option{-maltivec} and @option{-mabi=altivec}. The interface supports the following vector types. @smallexample vector unsigned char vector signed char vector bool char vector unsigned short vector signed short vector bool short vector pixel vector unsigned int vector signed int vector bool int vector float @end smallexample GCC's implementation of the high-level language interface available from C and C++ code differs from Motorola's documentation in several ways. @itemize @bullet @item A vector constant is a list of constant expressions within curly braces. @item A vector initializer requires no cast if the vector constant is of the same type as the variable it is initializing. @item If @code{signed} or @code{unsigned} is omitted, the signedness of the vector type is the default signedness of the base type. The default varies depending on the operating system, so a portable program should always specify the signedness. @item Compiling with @option{-maltivec} adds keywords @code{__vector}, @code{__pixel}, and @code{__bool}. Macros @option{vector}, @code{pixel}, and @code{bool} are defined in @code{} and can be undefined. @item GCC allows using a @code{typedef} name as the type specifier for a vector type. @item For C, overloaded functions are implemented with macros so the following does not work: @smallexample vec_add ((vector signed int)@{1, 2, 3, 4@}, foo); @end smallexample Since @code{vec_add} is a macro, the vector constant in the example is treated as four separate arguments. Wrap the entire argument in parentheses for this to work. @end itemize @emph{Note:} Only the @code{} interface is supported. Internally, GCC uses built-in functions to achieve the functionality in the aforementioned header file, but they are not supported and are subject to change without notice. The following interfaces are supported for the generic and specific AltiVec operations and the AltiVec predicates. In cases where there is a direct mapping between generic and specific operations, only the generic names are shown here, although the specific operations can also be used. Arguments that are documented as @code{const int} require literal integral values within the range required for that operation. @smallexample vector signed char vec_abs (vector signed char); vector signed short vec_abs (vector signed short); vector signed int vec_abs (vector signed int); vector float vec_abs (vector float); vector signed char vec_abss (vector signed char); vector signed short vec_abss (vector signed short); vector signed int vec_abss (vector signed int); vector signed char vec_add (vector bool char, vector signed char); vector signed char vec_add (vector signed char, vector bool char); vector signed char vec_add (vector signed char, vector signed char); vector unsigned char vec_add (vector bool char, vector unsigned char); vector unsigned char vec_add (vector unsigned char, vector bool char); vector unsigned char vec_add (vector unsigned char, vector unsigned char); vector signed short vec_add (vector bool short, vector signed short); vector signed short vec_add (vector signed short, vector bool short); vector signed short vec_add (vector signed short, vector signed short); vector unsigned short vec_add (vector bool short, vector unsigned short); vector unsigned short vec_add (vector unsigned short, vector bool short); vector unsigned short vec_add (vector unsigned short, vector unsigned short); vector signed int vec_add (vector bool int, vector signed int); vector signed int vec_add (vector signed int, vector bool int); vector signed int vec_add (vector signed int, vector signed int); vector unsigned int vec_add (vector bool int, vector unsigned int); vector unsigned int vec_add (vector unsigned int, vector bool int); vector unsigned int vec_add (vector unsigned int, vector unsigned int); vector float vec_add (vector float, vector float); vector float vec_vaddfp (vector float, vector float); vector signed int vec_vadduwm (vector bool int, vector signed int); vector signed int vec_vadduwm (vector signed int, vector bool int); vector signed int vec_vadduwm (vector signed int, vector signed int); vector unsigned int vec_vadduwm (vector bool int, vector unsigned int); vector unsigned int vec_vadduwm (vector unsigned int, vector bool int); vector unsigned int vec_vadduwm (vector unsigned int, vector unsigned int); vector signed short vec_vadduhm (vector bool short, vector signed short); vector signed short vec_vadduhm (vector signed short, vector bool short); vector signed short vec_vadduhm (vector signed short, vector signed short); vector unsigned short vec_vadduhm (vector bool short, vector unsigned short); vector unsigned short vec_vadduhm (vector unsigned short, vector bool short); vector unsigned short vec_vadduhm (vector unsigned short, vector unsigned short); vector signed char vec_vaddubm (vector bool char, vector signed char); vector signed char vec_vaddubm (vector signed char, vector bool char); vector signed char vec_vaddubm (vector signed char, vector signed char); vector unsigned char vec_vaddubm (vector bool char, vector unsigned char); vector unsigned char vec_vaddubm (vector unsigned char, vector bool char); vector unsigned char vec_vaddubm (vector unsigned char, vector unsigned char); vector unsigned int vec_addc (vector unsigned int, vector unsigned int); vector unsigned char vec_adds (vector bool char, vector unsigned char); vector unsigned char vec_adds (vector unsigned char, vector bool char); vector unsigned char vec_adds (vector unsigned char, vector unsigned char); vector signed char vec_adds (vector bool char, vector signed char); vector signed char vec_adds (vector signed char, vector bool char); vector signed char vec_adds (vector signed char, vector signed char); vector unsigned short vec_adds (vector bool short, vector unsigned short); vector unsigned short vec_adds (vector unsigned short, vector bool short); vector unsigned short vec_adds (vector unsigned short, vector unsigned short); vector signed short vec_adds (vector bool short, vector signed short); vector signed short vec_adds (vector signed short, vector bool short); vector signed short vec_adds (vector signed short, vector signed short); vector unsigned int vec_adds (vector bool int, vector unsigned int); vector unsigned int vec_adds (vector unsigned int, vector bool int); vector unsigned int vec_adds (vector unsigned int, vector unsigned int); vector signed int vec_adds (vector bool int, vector signed int); vector signed int vec_adds (vector signed int, vector bool int); vector signed int vec_adds (vector signed int, vector signed int); vector signed int vec_vaddsws (vector bool int, vector signed int); vector signed int vec_vaddsws (vector signed int, vector bool int); vector signed int vec_vaddsws (vector signed int, vector signed int); vector unsigned int vec_vadduws (vector bool int, vector unsigned int); vector unsigned int vec_vadduws (vector unsigned int, vector bool int); vector unsigned int vec_vadduws (vector unsigned int, vector unsigned int); vector signed short vec_vaddshs (vector bool short, vector signed short); vector signed short vec_vaddshs (vector signed short, vector bool short); vector signed short vec_vaddshs (vector signed short, vector signed short); vector unsigned short vec_vadduhs (vector bool short, vector unsigned short); vector unsigned short vec_vadduhs (vector unsigned short, vector bool short); vector unsigned short vec_vadduhs (vector unsigned short, vector unsigned short); vector signed char vec_vaddsbs (vector bool char, vector signed char); vector signed char vec_vaddsbs (vector signed char, vector bool char); vector signed char vec_vaddsbs (vector signed char, vector signed char); vector unsigned char vec_vaddubs (vector bool char, vector unsigned char); vector unsigned char vec_vaddubs (vector unsigned char, vector bool char); vector unsigned char vec_vaddubs (vector unsigned char, vector unsigned char); vector float vec_and (vector float, vector float); vector float vec_and (vector float, vector bool int); vector float vec_and (vector bool int, vector float); vector bool int vec_and (vector bool int, vector bool int); vector signed int vec_and (vector bool int, vector signed int); vector signed int vec_and (vector signed int, vector bool int); vector signed int vec_and (vector signed int, vector signed int); vector unsigned int vec_and (vector bool int, vector unsigned int); vector unsigned int vec_and (vector unsigned int, vector bool int); vector unsigned int vec_and (vector unsigned int, vector unsigned int); vector bool short vec_and (vector bool short, vector bool short); vector signed short vec_and (vector bool short, vector signed short); vector signed short vec_and (vector signed short, vector bool short); vector signed short vec_and (vector signed short, vector signed short); vector unsigned short vec_and (vector bool short, vector unsigned short); vector unsigned short vec_and (vector unsigned short, vector bool short); vector unsigned short vec_and (vector unsigned short, vector unsigned short); vector signed char vec_and (vector bool char, vector signed char); vector bool char vec_and (vector bool char, vector bool char); vector signed char vec_and (vector signed char, vector bool char); vector signed char vec_and (vector signed char, vector signed char); vector unsigned char vec_and (vector bool char, vector unsigned char); vector unsigned char vec_and (vector unsigned char, vector bool char); vector unsigned char vec_and (vector unsigned char, vector unsigned char); vector float vec_andc (vector float, vector float); vector float vec_andc (vector float, vector bool int); vector float vec_andc (vector bool int, vector float); vector bool int vec_andc (vector bool int, vector bool int); vector signed int vec_andc (vector bool int, vector signed int); vector signed int vec_andc (vector signed int, vector bool int); vector signed int vec_andc (vector signed int, vector signed int); vector unsigned int vec_andc (vector bool int, vector unsigned int); vector unsigned int vec_andc (vector unsigned int, vector bool int); vector unsigned int vec_andc (vector unsigned int, vector unsigned int); vector bool short vec_andc (vector bool short, vector bool short); vector signed short vec_andc (vector bool short, vector signed short); vector signed short vec_andc (vector signed short, vector bool short); vector signed short vec_andc (vector signed short, vector signed short); vector unsigned short vec_andc (vector bool short, vector unsigned short); vector unsigned short vec_andc (vector unsigned short, vector bool short); vector unsigned short vec_andc (vector unsigned short, vector unsigned short); vector signed char vec_andc (vector bool char, vector signed char); vector bool char vec_andc (vector bool char, vector bool char); vector signed char vec_andc (vector signed char, vector bool char); vector signed char vec_andc (vector signed char, vector signed char); vector unsigned char vec_andc (vector bool char, vector unsigned char); vector unsigned char vec_andc (vector unsigned char, vector bool char); vector unsigned char vec_andc (vector unsigned char, vector unsigned char); vector unsigned char vec_avg (vector unsigned char, vector unsigned char); vector signed char vec_avg (vector signed char, vector signed char); vector unsigned short vec_avg (vector unsigned short, vector unsigned short); vector signed short vec_avg (vector signed short, vector signed short); vector unsigned int vec_avg (vector unsigned int, vector unsigned int); vector signed int vec_avg (vector signed int, vector signed int); vector signed int vec_vavgsw (vector signed int, vector signed int); vector unsigned int vec_vavguw (vector unsigned int, vector unsigned int); vector signed short vec_vavgsh (vector signed short, vector signed short); vector unsigned short vec_vavguh (vector unsigned short, vector unsigned short); vector signed char vec_vavgsb (vector signed char, vector signed char); vector unsigned char vec_vavgub (vector unsigned char, vector unsigned char); vector float vec_ceil (vector float); vector signed int vec_cmpb (vector float, vector float); vector bool char vec_cmpeq (vector signed char, vector signed char); vector bool char vec_cmpeq (vector unsigned char, vector unsigned char); vector bool short vec_cmpeq (vector signed short, vector signed short); vector bool short vec_cmpeq (vector unsigned short, vector unsigned short); vector bool int vec_cmpeq (vector signed int, vector signed int); vector bool int vec_cmpeq (vector unsigned int, vector unsigned int); vector bool int vec_cmpeq (vector float, vector float); vector bool int vec_vcmpeqfp (vector float, vector float); vector bool int vec_vcmpequw (vector signed int, vector signed int); vector bool int vec_vcmpequw (vector unsigned int, vector unsigned int); vector bool short vec_vcmpequh (vector signed short, vector signed short); vector bool short vec_vcmpequh (vector unsigned short, vector unsigned short); vector bool char vec_vcmpequb (vector signed char, vector signed char); vector bool char vec_vcmpequb (vector unsigned char, vector unsigned char); vector bool int vec_cmpge (vector float, vector float); vector bool char vec_cmpgt (vector unsigned char, vector unsigned char); vector bool char vec_cmpgt (vector signed char, vector signed char); vector bool short vec_cmpgt (vector unsigned short, vector unsigned short); vector bool short vec_cmpgt (vector signed short, vector signed short); vector bool int vec_cmpgt (vector unsigned int, vector unsigned int); vector bool int vec_cmpgt (vector signed int, vector signed int); vector bool int vec_cmpgt (vector float, vector float); vector bool int vec_vcmpgtfp (vector float, vector float); vector bool int vec_vcmpgtsw (vector signed int, vector signed int); vector bool int vec_vcmpgtuw (vector unsigned int, vector unsigned int); vector bool short vec_vcmpgtsh (vector signed short, vector signed short); vector bool short vec_vcmpgtuh (vector unsigned short, vector unsigned short); vector bool char vec_vcmpgtsb (vector signed char, vector signed char); vector bool char vec_vcmpgtub (vector unsigned char, vector unsigned char); vector bool int vec_cmple (vector float, vector float); vector bool char vec_cmplt (vector unsigned char, vector unsigned char); vector bool char vec_cmplt (vector signed char, vector signed char); vector bool short vec_cmplt (vector unsigned short, vector unsigned short); vector bool short vec_cmplt (vector signed short, vector signed short); vector bool int vec_cmplt (vector unsigned int, vector unsigned int); vector bool int vec_cmplt (vector signed int, vector signed int); vector bool int vec_cmplt (vector float, vector float); vector float vec_ctf (vector unsigned int, const int); vector float vec_ctf (vector signed int, const int); vector float vec_vcfsx (vector signed int, const int); vector float vec_vcfux (vector unsigned int, const int); vector signed int vec_cts (vector float, const int); vector unsigned int vec_ctu (vector float, const int); void vec_dss (const int); void vec_dssall (void); void vec_dst (const vector unsigned char *, int, const int); void vec_dst (const vector signed char *, int, const int); void vec_dst (const vector bool char *, int, const int); void vec_dst (const vector unsigned short *, int, const int); void vec_dst (const vector signed short *, int, const int); void vec_dst (const vector bool short *, int, const int); void vec_dst (const vector pixel *, int, const int); void vec_dst (const vector unsigned int *, int, const int); void vec_dst (const vector signed int *, int, const int); void vec_dst (const vector bool int *, int, const int); void vec_dst (const vector float *, int, const int); void vec_dst (const unsigned char *, int, const int); void vec_dst (const signed char *, int, const int); void vec_dst (const unsigned short *, int, const int); void vec_dst (const short *, int, const int); void vec_dst (const unsigned int *, int, const int); void vec_dst (const int *, int, const int); void vec_dst (const unsigned long *, int, const int); void vec_dst (const long *, int, const int); void vec_dst (const float *, int, const int); void vec_dstst (const vector unsigned char *, int, const int); void vec_dstst (const vector signed char *, int, const int); void vec_dstst (const vector bool char *, int, const int); void vec_dstst (const vector unsigned short *, int, const int); void vec_dstst (const vector signed short *, int, const int); void vec_dstst (const vector bool short *, int, const int); void vec_dstst (const vector pixel *, int, const int); void vec_dstst (const vector unsigned int *, int, const int); void vec_dstst (const vector signed int *, int, const int); void vec_dstst (const vector bool int *, int, const int); void vec_dstst (const vector float *, int, const int); void vec_dstst (const unsigned char *, int, const int); void vec_dstst (const signed char *, int, const int); void vec_dstst (const unsigned short *, int, const int); void vec_dstst (const short *, int, const int); void vec_dstst (const unsigned int *, int, const int); void vec_dstst (const int *, int, const int); void vec_dstst (const unsigned long *, int, const int); void vec_dstst (const long *, int, const int); void vec_dstst (const float *, int, const int); void vec_dststt (const vector unsigned char *, int, const int); void vec_dststt (const vector signed char *, int, const int); void vec_dststt (const vector bool char *, int, const int); void vec_dststt (const vector unsigned short *, int, const int); void vec_dststt (const vector signed short *, int, const int); void vec_dststt (const vector bool short *, int, const int); void vec_dststt (const vector pixel *, int, const int); void vec_dststt (const vector unsigned int *, int, const int); void vec_dststt (const vector signed int *, int, const int); void vec_dststt (const vector bool int *, int, const int); void vec_dststt (const vector float *, int, const int); void vec_dststt (const unsigned char *, int, const int); void vec_dststt (const signed char *, int, const int); void vec_dststt (const unsigned short *, int, const int); void vec_dststt (const short *, int, const int); void vec_dststt (const unsigned int *, int, const int); void vec_dststt (const int *, int, const int); void vec_dststt (const unsigned long *, int, const int); void vec_dststt (const long *, int, const int); void vec_dststt (const float *, int, const int); void vec_dstt (const vector unsigned char *, int, const int); void vec_dstt (const vector signed char *, int, const int); void vec_dstt (const vector bool char *, int, const int); void vec_dstt (const vector unsigned short *, int, const int); void vec_dstt (const vector signed short *, int, const int); void vec_dstt (const vector bool short *, int, const int); void vec_dstt (const vector pixel *, int, const int); void vec_dstt (const vector unsigned int *, int, const int); void vec_dstt (const vector signed int *, int, const int); void vec_dstt (const vector bool int *, int, const int); void vec_dstt (const vector float *, int, const int); void vec_dstt (const unsigned char *, int, const int); void vec_dstt (const signed char *, int, const int); void vec_dstt (const unsigned short *, int, const int); void vec_dstt (const short *, int, const int); void vec_dstt (const unsigned int *, int, const int); void vec_dstt (const int *, int, const int); void vec_dstt (const unsigned long *, int, const int); void vec_dstt (const long *, int, const int); void vec_dstt (const float *, int, const int); vector float vec_expte (vector float); vector float vec_floor (vector float); vector float vec_ld (int, const vector float *); vector float vec_ld (int, const float *); vector bool int vec_ld (int, const vector bool int *); vector signed int vec_ld (int, const vector signed int *); vector signed int vec_ld (int, const int *); vector signed int vec_ld (int, const long *); vector unsigned int vec_ld (int, const vector unsigned int *); vector unsigned int vec_ld (int, const unsigned int *); vector unsigned int vec_ld (int, const unsigned long *); vector bool short vec_ld (int, const vector bool short *); vector pixel vec_ld (int, const vector pixel *); vector signed short vec_ld (int, const vector signed short *); vector signed short vec_ld (int, const short *); vector unsigned short vec_ld (int, const vector unsigned short *); vector unsigned short vec_ld (int, const unsigned short *); vector bool char vec_ld (int, const vector bool char *); vector signed char vec_ld (int, const vector signed char *); vector signed char vec_ld (int, const signed char *); vector unsigned char vec_ld (int, const vector unsigned char *); vector unsigned char vec_ld (int, const unsigned char *); vector signed char vec_lde (int, const signed char *); vector unsigned char vec_lde (int, const unsigned char *); vector signed short vec_lde (int, const short *); vector unsigned short vec_lde (int, const unsigned short *); vector float vec_lde (int, const float *); vector signed int vec_lde (int, const int *); vector unsigned int vec_lde (int, const unsigned int *); vector signed int vec_lde (int, const long *); vector unsigned int vec_lde (int, const unsigned long *); vector float vec_lvewx (int, float *); vector signed int vec_lvewx (int, int *); vector unsigned int vec_lvewx (int, unsigned int *); vector signed int vec_lvewx (int, long *); vector unsigned int vec_lvewx (int, unsigned long *); vector signed short vec_lvehx (int, short *); vector unsigned short vec_lvehx (int, unsigned short *); vector signed char vec_lvebx (int, char *); vector unsigned char vec_lvebx (int, unsigned char *); vector float vec_ldl (int, const vector float *); vector float vec_ldl (int, const float *); vector bool int vec_ldl (int, const vector bool int *); vector signed int vec_ldl (int, const vector signed int *); vector signed int vec_ldl (int, const int *); vector signed int vec_ldl (int, const long *); vector unsigned int vec_ldl (int, const vector unsigned int *); vector unsigned int vec_ldl (int, const unsigned int *); vector unsigned int vec_ldl (int, const unsigned long *); vector bool short vec_ldl (int, const vector bool short *); vector pixel vec_ldl (int, const vector pixel *); vector signed short vec_ldl (int, const vector signed short *); vector signed short vec_ldl (int, const short *); vector unsigned short vec_ldl (int, const vector unsigned short *); vector unsigned short vec_ldl (int, const unsigned short *); vector bool char vec_ldl (int, const vector bool char *); vector signed char vec_ldl (int, const vector signed char *); vector signed char vec_ldl (int, const signed char *); vector unsigned char vec_ldl (int, const vector unsigned char *); vector unsigned char vec_ldl (int, const unsigned char *); vector float vec_loge (vector float); vector unsigned char vec_lvsl (int, const volatile unsigned char *); vector unsigned char vec_lvsl (int, const volatile signed char *); vector unsigned char vec_lvsl (int, const volatile unsigned short *); vector unsigned char vec_lvsl (int, const volatile short *); vector unsigned char vec_lvsl (int, const volatile unsigned int *); vector unsigned char vec_lvsl (int, const volatile int *); vector unsigned char vec_lvsl (int, const volatile unsigned long *); vector unsigned char vec_lvsl (int, const volatile long *); vector unsigned char vec_lvsl (int, const volatile float *); vector unsigned char vec_lvsr (int, const volatile unsigned char *); vector unsigned char vec_lvsr (int, const volatile signed char *); vector unsigned char vec_lvsr (int, const volatile unsigned short *); vector unsigned char vec_lvsr (int, const volatile short *); vector unsigned char vec_lvsr (int, const volatile unsigned int *); vector unsigned char vec_lvsr (int, const volatile int *); vector unsigned char vec_lvsr (int, const volatile unsigned long *); vector unsigned char vec_lvsr (int, const volatile long *); vector unsigned char vec_lvsr (int, const volatile float *); vector float vec_madd (vector float, vector float, vector float); vector signed short vec_madds (vector signed short, vector signed short, vector signed short); vector unsigned char vec_max (vector bool char, vector unsigned char); vector unsigned char vec_max (vector unsigned char, vector bool char); vector unsigned char vec_max (vector unsigned char, vector unsigned char); vector signed char vec_max (vector bool char, vector signed char); vector signed char vec_max (vector signed char, vector bool char); vector signed char vec_max (vector signed char, vector signed char); vector unsigned short vec_max (vector bool short, vector unsigned short); vector unsigned short vec_max (vector unsigned short, vector bool short); vector unsigned short vec_max (vector unsigned short, vector unsigned short); vector signed short vec_max (vector bool short, vector signed short); vector signed short vec_max (vector signed short, vector bool short); vector signed short vec_max (vector signed short, vector signed short); vector unsigned int vec_max (vector bool int, vector unsigned int); vector unsigned int vec_max (vector unsigned int, vector bool int); vector unsigned int vec_max (vector unsigned int, vector unsigned int); vector signed int vec_max (vector bool int, vector signed int); vector signed int vec_max (vector signed int, vector bool int); vector signed int vec_max (vector signed int, vector signed int); vector float vec_max (vector float, vector float); vector float vec_vmaxfp (vector float, vector float); vector signed int vec_vmaxsw (vector bool int, vector signed int); vector signed int vec_vmaxsw (vector signed int, vector bool int); vector signed int vec_vmaxsw (vector signed int, vector signed int); vector unsigned int vec_vmaxuw (vector bool int, vector unsigned int); vector unsigned int vec_vmaxuw (vector unsigned int, vector bool int); vector unsigned int vec_vmaxuw (vector unsigned int, vector unsigned int); vector signed short vec_vmaxsh (vector bool short, vector signed short); vector signed short vec_vmaxsh (vector signed short, vector bool short); vector signed short vec_vmaxsh (vector signed short, vector signed short); vector unsigned short vec_vmaxuh (vector bool short, vector unsigned short); vector unsigned short vec_vmaxuh (vector unsigned short, vector bool short); vector unsigned short vec_vmaxuh (vector unsigned short, vector unsigned short); vector signed char vec_vmaxsb (vector bool char, vector signed char); vector signed char vec_vmaxsb (vector signed char, vector bool char); vector signed char vec_vmaxsb (vector signed char, vector signed char); vector unsigned char vec_vmaxub (vector bool char, vector unsigned char); vector unsigned char vec_vmaxub (vector unsigned char, vector bool char); vector unsigned char vec_vmaxub (vector unsigned char, vector unsigned char); vector bool char vec_mergeh (vector bool char, vector bool char); vector signed char vec_mergeh (vector signed char, vector signed char); vector unsigned char vec_mergeh (vector unsigned char, vector unsigned char); vector bool short vec_mergeh (vector bool short, vector bool short); vector pixel vec_mergeh (vector pixel, vector pixel); vector signed short vec_mergeh (vector signed short, vector signed short); vector unsigned short vec_mergeh (vector unsigned short, vector unsigned short); vector float vec_mergeh (vector float, vector float); vector bool int vec_mergeh (vector bool int, vector bool int); vector signed int vec_mergeh (vector signed int, vector signed int); vector unsigned int vec_mergeh (vector unsigned int, vector unsigned int); vector float vec_vmrghw (vector float, vector float); vector bool int vec_vmrghw (vector bool int, vector bool int); vector signed int vec_vmrghw (vector signed int, vector signed int); vector unsigned int vec_vmrghw (vector unsigned int, vector unsigned int); vector bool short vec_vmrghh (vector bool short, vector bool short); vector signed short vec_vmrghh (vector signed short, vector signed short); vector unsigned short vec_vmrghh (vector unsigned short, vector unsigned short); vector pixel vec_vmrghh (vector pixel, vector pixel); vector bool char vec_vmrghb (vector bool char, vector bool char); vector signed char vec_vmrghb (vector signed char, vector signed char); vector unsigned char vec_vmrghb (vector unsigned char, vector unsigned char); vector bool char vec_mergel (vector bool char, vector bool char); vector signed char vec_mergel (vector signed char, vector signed char); vector unsigned char vec_mergel (vector unsigned char, vector unsigned char); vector bool short vec_mergel (vector bool short, vector bool short); vector pixel vec_mergel (vector pixel, vector pixel); vector signed short vec_mergel (vector signed short, vector signed short); vector unsigned short vec_mergel (vector unsigned short, vector unsigned short); vector float vec_mergel (vector float, vector float); vector bool int vec_mergel (vector bool int, vector bool int); vector signed int vec_mergel (vector signed int, vector signed int); vector unsigned int vec_mergel (vector unsigned int, vector unsigned int); vector float vec_vmrglw (vector float, vector float); vector signed int vec_vmrglw (vector signed int, vector signed int); vector unsigned int vec_vmrglw (vector unsigned int, vector unsigned int); vector bool int vec_vmrglw (vector bool int, vector bool int); vector bool short vec_vmrglh (vector bool short, vector bool short); vector signed short vec_vmrglh (vector signed short, vector signed short); vector unsigned short vec_vmrglh (vector unsigned short, vector unsigned short); vector pixel vec_vmrglh (vector pixel, vector pixel); vector bool char vec_vmrglb (vector bool char, vector bool char); vector signed char vec_vmrglb (vector signed char, vector signed char); vector unsigned char vec_vmrglb (vector unsigned char, vector unsigned char); vector unsigned short vec_mfvscr (void); vector unsigned char vec_min (vector bool char, vector unsigned char); vector unsigned char vec_min (vector unsigned char, vector bool char); vector unsigned char vec_min (vector unsigned char, vector unsigned char); vector signed char vec_min (vector bool char, vector signed char); vector signed char vec_min (vector signed char, vector bool char); vector signed char vec_min (vector signed char, vector signed char); vector unsigned short vec_min (vector bool short, vector unsigned short); vector unsigned short vec_min (vector unsigned short, vector bool short); vector unsigned short vec_min (vector unsigned short, vector unsigned short); vector signed short vec_min (vector bool short, vector signed short); vector signed short vec_min (vector signed short, vector bool short); vector signed short vec_min (vector signed short, vector signed short); vector unsigned int vec_min (vector bool int, vector unsigned int); vector unsigned int vec_min (vector unsigned int, vector bool int); vector unsigned int vec_min (vector unsigned int, vector unsigned int); vector signed int vec_min (vector bool int, vector signed int); vector signed int vec_min (vector signed int, vector bool int); vector signed int vec_min (vector signed int, vector signed int); vector float vec_min (vector float, vector float); vector float vec_vminfp (vector float, vector float); vector signed int vec_vminsw (vector bool int, vector signed int); vector signed int vec_vminsw (vector signed int, vector bool int); vector signed int vec_vminsw (vector signed int, vector signed int); vector unsigned int vec_vminuw (vector bool int, vector unsigned int); vector unsigned int vec_vminuw (vector unsigned int, vector bool int); vector unsigned int vec_vminuw (vector unsigned int, vector unsigned int); vector signed short vec_vminsh (vector bool short, vector signed short); vector signed short vec_vminsh (vector signed short, vector bool short); vector signed short vec_vminsh (vector signed short, vector signed short); vector unsigned short vec_vminuh (vector bool short, vector unsigned short); vector unsigned short vec_vminuh (vector unsigned short, vector bool short); vector unsigned short vec_vminuh (vector unsigned short, vector unsigned short); vector signed char vec_vminsb (vector bool char, vector signed char); vector signed char vec_vminsb (vector signed char, vector bool char); vector signed char vec_vminsb (vector signed char, vector signed char); vector unsigned char vec_vminub (vector bool char, vector unsigned char); vector unsigned char vec_vminub (vector unsigned char, vector bool char); vector unsigned char vec_vminub (vector unsigned char, vector unsigned char); vector signed short vec_mladd (vector signed short, vector signed short, vector signed short); vector signed short vec_mladd (vector signed short, vector unsigned short, vector unsigned short); vector signed short vec_mladd (vector unsigned short, vector signed short, vector signed short); vector unsigned short vec_mladd (vector unsigned short, vector unsigned short, vector unsigned short); vector signed short vec_mradds (vector signed short, vector signed short, vector signed short); vector unsigned int vec_msum (vector unsigned char, vector unsigned char, vector unsigned int); vector signed int vec_msum (vector signed char, vector unsigned char, vector signed int); vector unsigned int vec_msum (vector unsigned short, vector unsigned short, vector unsigned int); vector signed int vec_msum (vector signed short, vector signed short, vector signed int); vector signed int vec_vmsumshm (vector signed short, vector signed short, vector signed int); vector unsigned int vec_vmsumuhm (vector unsigned short, vector unsigned short, vector unsigned int); vector signed int vec_vmsummbm (vector signed char, vector unsigned char, vector signed int); vector unsigned int vec_vmsumubm (vector unsigned char, vector unsigned char, vector unsigned int); vector unsigned int vec_msums (vector unsigned short, vector unsigned short, vector unsigned int); vector signed int vec_msums (vector signed short, vector signed short, vector signed int); vector signed int vec_vmsumshs (vector signed short, vector signed short, vector signed int); vector unsigned int vec_vmsumuhs (vector unsigned short, vector unsigned short, vector unsigned int); void vec_mtvscr (vector signed int); void vec_mtvscr (vector unsigned int); void vec_mtvscr (vector bool int); void vec_mtvscr (vector signed short); void vec_mtvscr (vector unsigned short); void vec_mtvscr (vector bool short); void vec_mtvscr (vector pixel); void vec_mtvscr (vector signed char); void vec_mtvscr (vector unsigned char); void vec_mtvscr (vector bool char); vector unsigned short vec_mule (vector unsigned char, vector unsigned char); vector signed short vec_mule (vector signed char, vector signed char); vector unsigned int vec_mule (vector unsigned short, vector unsigned short); vector signed int vec_mule (vector signed short, vector signed short); vector signed int vec_vmulesh (vector signed short, vector signed short); vector unsigned int vec_vmuleuh (vector unsigned short, vector unsigned short); vector signed short vec_vmulesb (vector signed char, vector signed char); vector unsigned short vec_vmuleub (vector unsigned char, vector unsigned char); vector unsigned short vec_mulo (vector unsigned char, vector unsigned char); vector signed short vec_mulo (vector signed char, vector signed char); vector unsigned int vec_mulo (vector unsigned short, vector unsigned short); vector signed int vec_mulo (vector signed short, vector signed short); vector signed int vec_vmulosh (vector signed short, vector signed short); vector unsigned int vec_vmulouh (vector unsigned short, vector unsigned short); vector signed short vec_vmulosb (vector signed char, vector signed char); vector unsigned short vec_vmuloub (vector unsigned char, vector unsigned char); vector float vec_nmsub (vector float, vector float, vector float); vector float vec_nor (vector float, vector float); vector signed int vec_nor (vector signed int, vector signed int); vector unsigned int vec_nor (vector unsigned int, vector unsigned int); vector bool int vec_nor (vector bool int, vector bool int); vector signed short vec_nor (vector signed short, vector signed short); vector unsigned short vec_nor (vector unsigned short, vector unsigned short); vector bool short vec_nor (vector bool short, vector bool short); vector signed char vec_nor (vector signed char, vector signed char); vector unsigned char vec_nor (vector unsigned char, vector unsigned char); vector bool char vec_nor (vector bool char, vector bool char); vector float vec_or (vector float, vector float); vector float vec_or (vector float, vector bool int); vector float vec_or (vector bool int, vector float); vector bool int vec_or (vector bool int, vector bool int); vector signed int vec_or (vector bool int, vector signed int); vector signed int vec_or (vector signed int, vector bool int); vector signed int vec_or (vector signed int, vector signed int); vector unsigned int vec_or (vector bool int, vector unsigned int); vector unsigned int vec_or (vector unsigned int, vector bool int); vector unsigned int vec_or (vector unsigned int, vector unsigned int); vector bool short vec_or (vector bool short, vector bool short); vector signed short vec_or (vector bool short, vector signed short); vector signed short vec_or (vector signed short, vector bool short); vector signed short vec_or (vector signed short, vector signed short); vector unsigned short vec_or (vector bool short, vector unsigned short); vector unsigned short vec_or (vector unsigned short, vector bool short); vector unsigned short vec_or (vector unsigned short, vector unsigned short); vector signed char vec_or (vector bool char, vector signed char); vector bool char vec_or (vector bool char, vector bool char); vector signed char vec_or (vector signed char, vector bool char); vector signed char vec_or (vector signed char, vector signed char); vector unsigned char vec_or (vector bool char, vector unsigned char); vector unsigned char vec_or (vector unsigned char, vector bool char); vector unsigned char vec_or (vector unsigned char, vector unsigned char); vector signed char vec_pack (vector signed short, vector signed short); vector unsigned char vec_pack (vector unsigned short, vector unsigned short); vector bool char vec_pack (vector bool short, vector bool short); vector signed short vec_pack (vector signed int, vector signed int); vector unsigned short vec_pack (vector unsigned int, vector unsigned int); vector bool short vec_pack (vector bool int, vector bool int); vector bool short vec_vpkuwum (vector bool int, vector bool int); vector signed short vec_vpkuwum (vector signed int, vector signed int); vector unsigned short vec_vpkuwum (vector unsigned int, vector unsigned int); vector bool char vec_vpkuhum (vector bool short, vector bool short); vector signed char vec_vpkuhum (vector signed short, vector signed short); vector unsigned char vec_vpkuhum (vector unsigned short, vector unsigned short); vector pixel vec_packpx (vector unsigned int, vector unsigned int); vector unsigned char vec_packs (vector unsigned short, vector unsigned short); vector signed char vec_packs (vector signed short, vector signed short); vector unsigned short vec_packs (vector unsigned int, vector unsigned int); vector signed short vec_packs (vector signed int, vector signed int); vector signed short vec_vpkswss (vector signed int, vector signed int); vector unsigned short vec_vpkuwus (vector unsigned int, vector unsigned int); vector signed char vec_vpkshss (vector signed short, vector signed short); vector unsigned char vec_vpkuhus (vector unsigned short, vector unsigned short); vector unsigned char vec_packsu (vector unsigned short, vector unsigned short); vector unsigned char vec_packsu (vector signed short, vector signed short); vector unsigned short vec_packsu (vector unsigned int, vector unsigned int); vector unsigned short vec_packsu (vector signed int, vector signed int); vector unsigned short vec_vpkswus (vector signed int, vector signed int); vector unsigned char vec_vpkshus (vector signed short, vector signed short); vector float vec_perm (vector float, vector float, vector unsigned char); vector signed int vec_perm (vector signed int, vector signed int, vector unsigned char); vector unsigned int vec_perm (vector unsigned int, vector unsigned int, vector unsigned char); vector bool int vec_perm (vector bool int, vector bool int, vector unsigned char); vector signed short vec_perm (vector signed short, vector signed short, vector unsigned char); vector unsigned short vec_perm (vector unsigned short, vector unsigned short, vector unsigned char); vector bool short vec_perm (vector bool short, vector bool short, vector unsigned char); vector pixel vec_perm (vector pixel, vector pixel, vector unsigned char); vector signed char vec_perm (vector signed char, vector signed char, vector unsigned char); vector unsigned char vec_perm (vector unsigned char, vector unsigned char, vector unsigned char); vector bool char vec_perm (vector bool char, vector bool char, vector unsigned char); vector float vec_re (vector float); vector signed char vec_rl (vector signed char, vector unsigned char); vector unsigned char vec_rl (vector unsigned char, vector unsigned char); vector signed short vec_rl (vector signed short, vector unsigned short); vector unsigned short vec_rl (vector unsigned short, vector unsigned short); vector signed int vec_rl (vector signed int, vector unsigned int); vector unsigned int vec_rl (vector unsigned int, vector unsigned int); vector signed int vec_vrlw (vector signed int, vector unsigned int); vector unsigned int vec_vrlw (vector unsigned int, vector unsigned int); vector signed short vec_vrlh (vector signed short, vector unsigned short); vector unsigned short vec_vrlh (vector unsigned short, vector unsigned short); vector signed char vec_vrlb (vector signed char, vector unsigned char); vector unsigned char vec_vrlb (vector unsigned char, vector unsigned char); vector float vec_round (vector float); vector float vec_rsqrte (vector float); vector float vec_sel (vector float, vector float, vector bool int); vector float vec_sel (vector float, vector float, vector unsigned int); vector signed int vec_sel (vector signed int, vector signed int, vector bool int); vector signed int vec_sel (vector signed int, vector signed int, vector unsigned int); vector unsigned int vec_sel (vector unsigned int, vector unsigned int, vector bool int); vector unsigned int vec_sel (vector unsigned int, vector unsigned int, vector unsigned int); vector bool int vec_sel (vector bool int, vector bool int, vector bool int); vector bool int vec_sel (vector bool int, vector bool int, vector unsigned int); vector signed short vec_sel (vector signed short, vector signed short, vector bool short); vector signed short vec_sel (vector signed short, vector signed short, vector unsigned short); vector unsigned short vec_sel (vector unsigned short, vector unsigned short, vector bool short); vector unsigned short vec_sel (vector unsigned short, vector unsigned short, vector unsigned short); vector bool short vec_sel (vector bool short, vector bool short, vector bool short); vector bool short vec_sel (vector bool short, vector bool short, vector unsigned short); vector signed char vec_sel (vector signed char, vector signed char, vector bool char); vector signed char vec_sel (vector signed char, vector signed char, vector unsigned char); vector unsigned char vec_sel (vector unsigned char, vector unsigned char, vector bool char); vector unsigned char vec_sel (vector unsigned char, vector unsigned char, vector unsigned char); vector bool char vec_sel (vector bool char, vector bool char, vector bool char); vector bool char vec_sel (vector bool char, vector bool char, vector unsigned char); vector signed char vec_sl (vector signed char, vector unsigned char); vector unsigned char vec_sl (vector unsigned char, vector unsigned char); vector signed short vec_sl (vector signed short, vector unsigned short); vector unsigned short vec_sl (vector unsigned short, vector unsigned short); vector signed int vec_sl (vector signed int, vector unsigned int); vector unsigned int vec_sl (vector unsigned int, vector unsigned int); vector signed int vec_vslw (vector signed int, vector unsigned int); vector unsigned int vec_vslw (vector unsigned int, vector unsigned int); vector signed short vec_vslh (vector signed short, vector unsigned short); vector unsigned short vec_vslh (vector unsigned short, vector unsigned short); vector signed char vec_vslb (vector signed char, vector unsigned char); vector unsigned char vec_vslb (vector unsigned char, vector unsigned char); vector float vec_sld (vector float, vector float, const int); vector signed int vec_sld (vector signed int, vector signed int, const int); vector unsigned int vec_sld (vector unsigned int, vector unsigned int, const int); vector bool int vec_sld (vector bool int, vector bool int, const int); vector signed short vec_sld (vector signed short, vector signed short, const int); vector unsigned short vec_sld (vector unsigned short, vector unsigned short, const int); vector bool short vec_sld (vector bool short, vector bool short, const int); vector pixel vec_sld (vector pixel, vector pixel, const int); vector signed char vec_sld (vector signed char, vector signed char, const int); vector unsigned char vec_sld (vector unsigned char, vector unsigned char, const int); vector bool char vec_sld (vector bool char, vector bool char, const int); vector signed int vec_sll (vector signed int, vector unsigned int); vector signed int vec_sll (vector signed int, vector unsigned short); vector signed int vec_sll (vector signed int, vector unsigned char); vector unsigned int vec_sll (vector unsigned int, vector unsigned int); vector unsigned int vec_sll (vector unsigned int, vector unsigned short); vector unsigned int vec_sll (vector unsigned int, vector unsigned char); vector bool int vec_sll (vector bool int, vector unsigned int); vector bool int vec_sll (vector bool int, vector unsigned short); vector bool int vec_sll (vector bool int, vector unsigned char); vector signed short vec_sll (vector signed short, vector unsigned int); vector signed short vec_sll (vector signed short, vector unsigned short); vector signed short vec_sll (vector signed short, vector unsigned char); vector unsigned short vec_sll (vector unsigned short, vector unsigned int); vector unsigned short vec_sll (vector unsigned short, vector unsigned short); vector unsigned short vec_sll (vector unsigned short, vector unsigned char); vector bool short vec_sll (vector bool short, vector unsigned int); vector bool short vec_sll (vector bool short, vector unsigned short); vector bool short vec_sll (vector bool short, vector unsigned char); vector pixel vec_sll (vector pixel, vector unsigned int); vector pixel vec_sll (vector pixel, vector unsigned short); vector pixel vec_sll (vector pixel, vector unsigned char); vector signed char vec_sll (vector signed char, vector unsigned int); vector signed char vec_sll (vector signed char, vector unsigned short); vector signed char vec_sll (vector signed char, vector unsigned char); vector unsigned char vec_sll (vector unsigned char, vector unsigned int); vector unsigned char vec_sll (vector unsigned char, vector unsigned short); vector unsigned char vec_sll (vector unsigned char, vector unsigned char); vector bool char vec_sll (vector bool char, vector unsigned int); vector bool char vec_sll (vector bool char, vector unsigned short); vector bool char vec_sll (vector bool char, vector unsigned char); vector float vec_slo (vector float, vector signed char); vector float vec_slo (vector float, vector unsigned char); vector signed int vec_slo (vector signed int, vector signed char); vector signed int vec_slo (vector signed int, vector unsigned char); vector unsigned int vec_slo (vector unsigned int, vector signed char); vector unsigned int vec_slo (vector unsigned int, vector unsigned char); vector signed short vec_slo (vector signed short, vector signed char); vector signed short vec_slo (vector signed short, vector unsigned char); vector unsigned short vec_slo (vector unsigned short, vector signed char); vector unsigned short vec_slo (vector unsigned short, vector unsigned char); vector pixel vec_slo (vector pixel, vector signed char); vector pixel vec_slo (vector pixel, vector unsigned char); vector signed char vec_slo (vector signed char, vector signed char); vector signed char vec_slo (vector signed char, vector unsigned char); vector unsigned char vec_slo (vector unsigned char, vector signed char); vector unsigned char vec_slo (vector unsigned char, vector unsigned char); vector signed char vec_splat (vector signed char, const int); vector unsigned char vec_splat (vector unsigned char, const int); vector bool char vec_splat (vector bool char, const int); vector signed short vec_splat (vector signed short, const int); vector unsigned short vec_splat (vector unsigned short, const int); vector bool short vec_splat (vector bool short, const int); vector pixel vec_splat (vector pixel, const int); vector float vec_splat (vector float, const int); vector signed int vec_splat (vector signed int, const int); vector unsigned int vec_splat (vector unsigned int, const int); vector bool int vec_splat (vector bool int, const int); vector float vec_vspltw (vector float, const int); vector signed int vec_vspltw (vector signed int, const int); vector unsigned int vec_vspltw (vector unsigned int, const int); vector bool int vec_vspltw (vector bool int, const int); vector bool short vec_vsplth (vector bool short, const int); vector signed short vec_vsplth (vector signed short, const int); vector unsigned short vec_vsplth (vector unsigned short, const int); vector pixel vec_vsplth (vector pixel, const int); vector signed char vec_vspltb (vector signed char, const int); vector unsigned char vec_vspltb (vector unsigned char, const int); vector bool char vec_vspltb (vector bool char, const int); vector signed char vec_splat_s8 (const int); vector signed short vec_splat_s16 (const int); vector signed int vec_splat_s32 (const int); vector unsigned char vec_splat_u8 (const int); vector unsigned short vec_splat_u16 (const int); vector unsigned int vec_splat_u32 (const int); vector signed char vec_sr (vector signed char, vector unsigned char); vector unsigned char vec_sr (vector unsigned char, vector unsigned char); vector signed short vec_sr (vector signed short, vector unsigned short); vector unsigned short vec_sr (vector unsigned short, vector unsigned short); vector signed int vec_sr (vector signed int, vector unsigned int); vector unsigned int vec_sr (vector unsigned int, vector unsigned int); vector signed int vec_vsrw (vector signed int, vector unsigned int); vector unsigned int vec_vsrw (vector unsigned int, vector unsigned int); vector signed short vec_vsrh (vector signed short, vector unsigned short); vector unsigned short vec_vsrh (vector unsigned short, vector unsigned short); vector signed char vec_vsrb (vector signed char, vector unsigned char); vector unsigned char vec_vsrb (vector unsigned char, vector unsigned char); vector signed char vec_sra (vector signed char, vector unsigned char); vector unsigned char vec_sra (vector unsigned char, vector unsigned char); vector signed short vec_sra (vector signed short, vector unsigned short); vector unsigned short vec_sra (vector unsigned short, vector unsigned short); vector signed int vec_sra (vector signed int, vector unsigned int); vector unsigned int vec_sra (vector unsigned int, vector unsigned int); vector signed int vec_vsraw (vector signed int, vector unsigned int); vector unsigned int vec_vsraw (vector unsigned int, vector unsigned int); vector signed short vec_vsrah (vector signed short, vector unsigned short); vector unsigned short vec_vsrah (vector unsigned short, vector unsigned short); vector signed char vec_vsrab (vector signed char, vector unsigned char); vector unsigned char vec_vsrab (vector unsigned char, vector unsigned char); vector signed int vec_srl (vector signed int, vector unsigned int); vector signed int vec_srl (vector signed int, vector unsigned short); vector signed int vec_srl (vector signed int, vector unsigned char); vector unsigned int vec_srl (vector unsigned int, vector unsigned int); vector unsigned int vec_srl (vector unsigned int, vector unsigned short); vector unsigned int vec_srl (vector unsigned int, vector unsigned char); vector bool int vec_srl (vector bool int, vector unsigned int); vector bool int vec_srl (vector bool int, vector unsigned short); vector bool int vec_srl (vector bool int, vector unsigned char); vector signed short vec_srl (vector signed short, vector unsigned int); vector signed short vec_srl (vector signed short, vector unsigned short); vector signed short vec_srl (vector signed short, vector unsigned char); vector unsigned short vec_srl (vector unsigned short, vector unsigned int); vector unsigned short vec_srl (vector unsigned short, vector unsigned short); vector unsigned short vec_srl (vector unsigned short, vector unsigned char); vector bool short vec_srl (vector bool short, vector unsigned int); vector bool short vec_srl (vector bool short, vector unsigned short); vector bool short vec_srl (vector bool short, vector unsigned char); vector pixel vec_srl (vector pixel, vector unsigned int); vector pixel vec_srl (vector pixel, vector unsigned short); vector pixel vec_srl (vector pixel, vector unsigned char); vector signed char vec_srl (vector signed char, vector unsigned int); vector signed char vec_srl (vector signed char, vector unsigned short); vector signed char vec_srl (vector signed char, vector unsigned char); vector unsigned char vec_srl (vector unsigned char, vector unsigned int); vector unsigned char vec_srl (vector unsigned char, vector unsigned short); vector unsigned char vec_srl (vector unsigned char, vector unsigned char); vector bool char vec_srl (vector bool char, vector unsigned int); vector bool char vec_srl (vector bool char, vector unsigned short); vector bool char vec_srl (vector bool char, vector unsigned char); vector float vec_sro (vector float, vector signed char); vector float vec_sro (vector float, vector unsigned char); vector signed int vec_sro (vector signed int, vector signed char); vector signed int vec_sro (vector signed int, vector unsigned char); vector unsigned int vec_sro (vector unsigned int, vector signed char); vector unsigned int vec_sro (vector unsigned int, vector unsigned char); vector signed short vec_sro (vector signed short, vector signed char); vector signed short vec_sro (vector signed short, vector unsigned char); vector unsigned short vec_sro (vector unsigned short, vector signed char); vector unsigned short vec_sro (vector unsigned short, vector unsigned char); vector pixel vec_sro (vector pixel, vector signed char); vector pixel vec_sro (vector pixel, vector unsigned char); vector signed char vec_sro (vector signed char, vector signed char); vector signed char vec_sro (vector signed char, vector unsigned char); vector unsigned char vec_sro (vector unsigned char, vector signed char); vector unsigned char vec_sro (vector unsigned char, vector unsigned char); void vec_st (vector float, int, vector float *); void vec_st (vector float, int, float *); void vec_st (vector signed int, int, vector signed int *); void vec_st (vector signed int, int, int *); void vec_st (vector unsigned int, int, vector unsigned int *); void vec_st (vector unsigned int, int, unsigned int *); void vec_st (vector bool int, int, vector bool int *); void vec_st (vector bool int, int, unsigned int *); void vec_st (vector bool int, int, int *); void vec_st (vector signed short, int, vector signed short *); void vec_st (vector signed short, int, short *); void vec_st (vector unsigned short, int, vector unsigned short *); void vec_st (vector unsigned short, int, unsigned short *); void vec_st (vector bool short, int, vector bool short *); void vec_st (vector bool short, int, unsigned short *); void vec_st (vector pixel, int, vector pixel *); void vec_st (vector pixel, int, unsigned short *); void vec_st (vector pixel, int, short *); void vec_st (vector bool short, int, short *); void vec_st (vector signed char, int, vector signed char *); void vec_st (vector signed char, int, signed char *); void vec_st (vector unsigned char, int, vector unsigned char *); void vec_st (vector unsigned char, int, unsigned char *); void vec_st (vector bool char, int, vector bool char *); void vec_st (vector bool char, int, unsigned char *); void vec_st (vector bool char, int, signed char *); void vec_ste (vector signed char, int, signed char *); void vec_ste (vector unsigned char, int, unsigned char *); void vec_ste (vector bool char, int, signed char *); void vec_ste (vector bool char, int, unsigned char *); void vec_ste (vector signed short, int, short *); void vec_ste (vector unsigned short, int, unsigned short *); void vec_ste (vector bool short, int, short *); void vec_ste (vector bool short, int, unsigned short *); void vec_ste (vector pixel, int, short *); void vec_ste (vector pixel, int, unsigned short *); void vec_ste (vector float, int, float *); void vec_ste (vector signed int, int, int *); void vec_ste (vector unsigned int, int, unsigned int *); void vec_ste (vector bool int, int, int *); void vec_ste (vector bool int, int, unsigned int *); void vec_stvewx (vector float, int, float *); void vec_stvewx (vector signed int, int, int *); void vec_stvewx (vector unsigned int, int, unsigned int *); void vec_stvewx (vector bool int, int, int *); void vec_stvewx (vector bool int, int, unsigned int *); void vec_stvehx (vector signed short, int, short *); void vec_stvehx (vector unsigned short, int, unsigned short *); void vec_stvehx (vector bool short, int, short *); void vec_stvehx (vector bool short, int, unsigned short *); void vec_stvehx (vector pixel, int, short *); void vec_stvehx (vector pixel, int, unsigned short *); void vec_stvebx (vector signed char, int, signed char *); void vec_stvebx (vector unsigned char, int, unsigned char *); void vec_stvebx (vector bool char, int, signed char *); void vec_stvebx (vector bool char, int, unsigned char *); void vec_stl (vector float, int, vector float *); void vec_stl (vector float, int, float *); void vec_stl (vector signed int, int, vector signed int *); void vec_stl (vector signed int, int, int *); void vec_stl (vector unsigned int, int, vector unsigned int *); void vec_stl (vector unsigned int, int, unsigned int *); void vec_stl (vector bool int, int, vector bool int *); void vec_stl (vector bool int, int, unsigned int *); void vec_stl (vector bool int, int, int *); void vec_stl (vector signed short, int, vector signed short *); void vec_stl (vector signed short, int, short *); void vec_stl (vector unsigned short, int, vector unsigned short *); void vec_stl (vector unsigned short, int, unsigned short *); void vec_stl (vector bool short, int, vector bool short *); void vec_stl (vector bool short, int, unsigned short *); void vec_stl (vector bool short, int, short *); void vec_stl (vector pixel, int, vector pixel *); void vec_stl (vector pixel, int, unsigned short *); void vec_stl (vector pixel, int, short *); void vec_stl (vector signed char, int, vector signed char *); void vec_stl (vector signed char, int, signed char *); void vec_stl (vector unsigned char, int, vector unsigned char *); void vec_stl (vector unsigned char, int, unsigned char *); void vec_stl (vector bool char, int, vector bool char *); void vec_stl (vector bool char, int, unsigned char *); void vec_stl (vector bool char, int, signed char *); vector signed char vec_sub (vector bool char, vector signed char); vector signed char vec_sub (vector signed char, vector bool char); vector signed char vec_sub (vector signed char, vector signed char); vector unsigned char vec_sub (vector bool char, vector unsigned char); vector unsigned char vec_sub (vector unsigned char, vector bool char); vector unsigned char vec_sub (vector unsigned char, vector unsigned char); vector signed short vec_sub (vector bool short, vector signed short); vector signed short vec_sub (vector signed short, vector bool short); vector signed short vec_sub (vector signed short, vector signed short); vector unsigned short vec_sub (vector bool short, vector unsigned short); vector unsigned short vec_sub (vector unsigned short, vector bool short); vector unsigned short vec_sub (vector unsigned short, vector unsigned short); vector signed int vec_sub (vector bool int, vector signed int); vector signed int vec_sub (vector signed int, vector bool int); vector signed int vec_sub (vector signed int, vector signed int); vector unsigned int vec_sub (vector bool int, vector unsigned int); vector unsigned int vec_sub (vector unsigned int, vector bool int); vector unsigned int vec_sub (vector unsigned int, vector unsigned int); vector float vec_sub (vector float, vector float); vector float vec_vsubfp (vector float, vector float); vector signed int vec_vsubuwm (vector bool int, vector signed int); vector signed int vec_vsubuwm (vector signed int, vector bool int); vector signed int vec_vsubuwm (vector signed int, vector signed int); vector unsigned int vec_vsubuwm (vector bool int, vector unsigned int); vector unsigned int vec_vsubuwm (vector unsigned int, vector bool int); vector unsigned int vec_vsubuwm (vector unsigned int, vector unsigned int); vector signed short vec_vsubuhm (vector bool short, vector signed short); vector signed short vec_vsubuhm (vector signed short, vector bool short); vector signed short vec_vsubuhm (vector signed short, vector signed short); vector unsigned short vec_vsubuhm (vector bool short, vector unsigned short); vector unsigned short vec_vsubuhm (vector unsigned short, vector bool short); vector unsigned short vec_vsubuhm (vector unsigned short, vector unsigned short); vector signed char vec_vsububm (vector bool char, vector signed char); vector signed char vec_vsububm (vector signed char, vector bool char); vector signed char vec_vsububm (vector signed char, vector signed char); vector unsigned char vec_vsububm (vector bool char, vector unsigned char); vector unsigned char vec_vsububm (vector unsigned char, vector bool char); vector unsigned char vec_vsububm (vector unsigned char, vector unsigned char); vector unsigned int vec_subc (vector unsigned int, vector unsigned int); vector unsigned char vec_subs (vector bool char, vector unsigned char); vector unsigned char vec_subs (vector unsigned char, vector bool char); vector unsigned char vec_subs (vector unsigned char, vector unsigned char); vector signed char vec_subs (vector bool char, vector signed char); vector signed char vec_subs (vector signed char, vector bool char); vector signed char vec_subs (vector signed char, vector signed char); vector unsigned short vec_subs (vector bool short, vector unsigned short); vector unsigned short vec_subs (vector unsigned short, vector bool short); vector unsigned short vec_subs (vector unsigned short, vector unsigned short); vector signed short vec_subs (vector bool short, vector signed short); vector signed short vec_subs (vector signed short, vector bool short); vector signed short vec_subs (vector signed short, vector signed short); vector unsigned int vec_subs (vector bool int, vector unsigned int); vector unsigned int vec_subs (vector unsigned int, vector bool int); vector unsigned int vec_subs (vector unsigned int, vector unsigned int); vector signed int vec_subs (vector bool int, vector signed int); vector signed int vec_subs (vector signed int, vector bool int); vector signed int vec_subs (vector signed int, vector signed int); vector signed int vec_vsubsws (vector bool int, vector signed int); vector signed int vec_vsubsws (vector signed int, vector bool int); vector signed int vec_vsubsws (vector signed int, vector signed int); vector unsigned int vec_vsubuws (vector bool int, vector unsigned int); vector unsigned int vec_vsubuws (vector unsigned int, vector bool int); vector unsigned int vec_vsubuws (vector unsigned int, vector unsigned int); vector signed short vec_vsubshs (vector bool short, vector signed short); vector signed short vec_vsubshs (vector signed short, vector bool short); vector signed short vec_vsubshs (vector signed short, vector signed short); vector unsigned short vec_vsubuhs (vector bool short, vector unsigned short); vector unsigned short vec_vsubuhs (vector unsigned short, vector bool short); vector unsigned short vec_vsubuhs (vector unsigned short, vector unsigned short); vector signed char vec_vsubsbs (vector bool char, vector signed char); vector signed char vec_vsubsbs (vector signed char, vector bool char); vector signed char vec_vsubsbs (vector signed char, vector signed char); vector unsigned char vec_vsububs (vector bool char, vector unsigned char); vector unsigned char vec_vsububs (vector unsigned char, vector bool char); vector unsigned char vec_vsububs (vector unsigned char, vector unsigned char); vector unsigned int vec_sum4s (vector unsigned char, vector unsigned int); vector signed int vec_sum4s (vector signed char, vector signed int); vector signed int vec_sum4s (vector signed short, vector signed int); vector signed int vec_vsum4shs (vector signed short, vector signed int); vector signed int vec_vsum4sbs (vector signed char, vector signed int); vector unsigned int vec_vsum4ubs (vector unsigned char, vector unsigned int); vector signed int vec_sum2s (vector signed int, vector signed int); vector signed int vec_sums (vector signed int, vector signed int); vector float vec_trunc (vector float); vector signed short vec_unpackh (vector signed char); vector bool short vec_unpackh (vector bool char); vector signed int vec_unpackh (vector signed short); vector bool int vec_unpackh (vector bool short); vector unsigned int vec_unpackh (vector pixel); vector bool int vec_vupkhsh (vector bool short); vector signed int vec_vupkhsh (vector signed short); vector unsigned int vec_vupkhpx (vector pixel); vector bool short vec_vupkhsb (vector bool char); vector signed short vec_vupkhsb (vector signed char); vector signed short vec_unpackl (vector signed char); vector bool short vec_unpackl (vector bool char); vector unsigned int vec_unpackl (vector pixel); vector signed int vec_unpackl (vector signed short); vector bool int vec_unpackl (vector bool short); vector unsigned int vec_vupklpx (vector pixel); vector bool int vec_vupklsh (vector bool short); vector signed int vec_vupklsh (vector signed short); vector bool short vec_vupklsb (vector bool char); vector signed short vec_vupklsb (vector signed char); vector float vec_xor (vector float, vector float); vector float vec_xor (vector float, vector bool int); vector float vec_xor (vector bool int, vector float); vector bool int vec_xor (vector bool int, vector bool int); vector signed int vec_xor (vector bool int, vector signed int); vector signed int vec_xor (vector signed int, vector bool int); vector signed int vec_xor (vector signed int, vector signed int); vector unsigned int vec_xor (vector bool int, vector unsigned int); vector unsigned int vec_xor (vector unsigned int, vector bool int); vector unsigned int vec_xor (vector unsigned int, vector unsigned int); vector bool short vec_xor (vector bool short, vector bool short); vector signed short vec_xor (vector bool short, vector signed short); vector signed short vec_xor (vector signed short, vector bool short); vector signed short vec_xor (vector signed short, vector signed short); vector unsigned short vec_xor (vector bool short, vector unsigned short); vector unsigned short vec_xor (vector unsigned short, vector bool short); vector unsigned short vec_xor (vector unsigned short, vector unsigned short); vector signed char vec_xor (vector bool char, vector signed char); vector bool char vec_xor (vector bool char, vector bool char); vector signed char vec_xor (vector signed char, vector bool char); vector signed char vec_xor (vector signed char, vector signed char); vector unsigned char vec_xor (vector bool char, vector unsigned char); vector unsigned char vec_xor (vector unsigned char, vector bool char); vector unsigned char vec_xor (vector unsigned char, vector unsigned char); int vec_all_eq (vector signed char, vector bool char); int vec_all_eq (vector signed char, vector signed char); int vec_all_eq (vector unsigned char, vector bool char); int vec_all_eq (vector unsigned char, vector unsigned char); int vec_all_eq (vector bool char, vector bool char); int vec_all_eq (vector bool char, vector unsigned char); int vec_all_eq (vector bool char, vector signed char); int vec_all_eq (vector signed short, vector bool short); int vec_all_eq (vector signed short, vector signed short); int vec_all_eq (vector unsigned short, vector bool short); int vec_all_eq (vector unsigned short, vector unsigned short); int vec_all_eq (vector bool short, vector bool short); int vec_all_eq (vector bool short, vector unsigned short); int vec_all_eq (vector bool short, vector signed short); int vec_all_eq (vector pixel, vector pixel); int vec_all_eq (vector signed int, vector bool int); int vec_all_eq (vector signed int, vector signed int); int vec_all_eq (vector unsigned int, vector bool int); int vec_all_eq (vector unsigned int, vector unsigned int); int vec_all_eq (vector bool int, vector bool int); int vec_all_eq (vector bool int, vector unsigned int); int vec_all_eq (vector bool int, vector signed int); int vec_all_eq (vector float, vector float); int vec_all_ge (vector bool char, vector unsigned char); int vec_all_ge (vector unsigned char, vector bool char); int vec_all_ge (vector unsigned char, vector unsigned char); int vec_all_ge (vector bool char, vector signed char); int vec_all_ge (vector signed char, vector bool char); int vec_all_ge (vector signed char, vector signed char); int vec_all_ge (vector bool short, vector unsigned short); int vec_all_ge (vector unsigned short, vector bool short); int vec_all_ge (vector unsigned short, vector unsigned short); int vec_all_ge (vector signed short, vector signed short); int vec_all_ge (vector bool short, vector signed short); int vec_all_ge (vector signed short, vector bool short); int vec_all_ge (vector bool int, vector unsigned int); int vec_all_ge (vector unsigned int, vector bool int); int vec_all_ge (vector unsigned int, vector unsigned int); int vec_all_ge (vector bool int, vector signed int); int vec_all_ge (vector signed int, vector bool int); int vec_all_ge (vector signed int, vector signed int); int vec_all_ge (vector float, vector float); int vec_all_gt (vector bool char, vector unsigned char); int vec_all_gt (vector unsigned char, vector bool char); int vec_all_gt (vector unsigned char, vector unsigned char); int vec_all_gt (vector bool char, vector signed char); int vec_all_gt (vector signed char, vector bool char); int vec_all_gt (vector signed char, vector signed char); int vec_all_gt (vector bool short, vector unsigned short); int vec_all_gt (vector unsigned short, vector bool short); int vec_all_gt (vector unsigned short, vector unsigned short); int vec_all_gt (vector bool short, vector signed short); int vec_all_gt (vector signed short, vector bool short); int vec_all_gt (vector signed short, vector signed short); int vec_all_gt (vector bool int, vector unsigned int); int vec_all_gt (vector unsigned int, vector bool int); int vec_all_gt (vector unsigned int, vector unsigned int); int vec_all_gt (vector bool int, vector signed int); int vec_all_gt (vector signed int, vector bool int); int vec_all_gt (vector signed int, vector signed int); int vec_all_gt (vector float, vector float); int vec_all_in (vector float, vector float); int vec_all_le (vector bool char, vector unsigned char); int vec_all_le (vector unsigned char, vector bool char); int vec_all_le (vector unsigned char, vector unsigned char); int vec_all_le (vector bool char, vector signed char); int vec_all_le (vector signed char, vector bool char); int vec_all_le (vector signed char, vector signed char); int vec_all_le (vector bool short, vector unsigned short); int vec_all_le (vector unsigned short, vector bool short); int vec_all_le (vector unsigned short, vector unsigned short); int vec_all_le (vector bool short, vector signed short); int vec_all_le (vector signed short, vector bool short); int vec_all_le (vector signed short, vector signed short); int vec_all_le (vector bool int, vector unsigned int); int vec_all_le (vector unsigned int, vector bool int); int vec_all_le (vector unsigned int, vector unsigned int); int vec_all_le (vector bool int, vector signed int); int vec_all_le (vector signed int, vector bool int); int vec_all_le (vector signed int, vector signed int); int vec_all_le (vector float, vector float); int vec_all_lt (vector bool char, vector unsigned char); int vec_all_lt (vector unsigned char, vector bool char); int vec_all_lt (vector unsigned char, vector unsigned char); int vec_all_lt (vector bool char, vector signed char); int vec_all_lt (vector signed char, vector bool char); int vec_all_lt (vector signed char, vector signed char); int vec_all_lt (vector bool short, vector unsigned short); int vec_all_lt (vector unsigned short, vector bool short); int vec_all_lt (vector unsigned short, vector unsigned short); int vec_all_lt (vector bool short, vector signed short); int vec_all_lt (vector signed short, vector bool short); int vec_all_lt (vector signed short, vector signed short); int vec_all_lt (vector bool int, vector unsigned int); int vec_all_lt (vector unsigned int, vector bool int); int vec_all_lt (vector unsigned int, vector unsigned int); int vec_all_lt (vector bool int, vector signed int); int vec_all_lt (vector signed int, vector bool int); int vec_all_lt (vector signed int, vector signed int); int vec_all_lt (vector float, vector float); int vec_all_nan (vector float); int vec_all_ne (vector signed char, vector bool char); int vec_all_ne (vector signed char, vector signed char); int vec_all_ne (vector unsigned char, vector bool char); int vec_all_ne (vector unsigned char, vector unsigned char); int vec_all_ne (vector bool char, vector bool char); int vec_all_ne (vector bool char, vector unsigned char); int vec_all_ne (vector bool char, vector signed char); int vec_all_ne (vector signed short, vector bool short); int vec_all_ne (vector signed short, vector signed short); int vec_all_ne (vector unsigned short, vector bool short); int vec_all_ne (vector unsigned short, vector unsigned short); int vec_all_ne (vector bool short, vector bool short); int vec_all_ne (vector bool short, vector unsigned short); int vec_all_ne (vector bool short, vector signed short); int vec_all_ne (vector pixel, vector pixel); int vec_all_ne (vector signed int, vector bool int); int vec_all_ne (vector signed int, vector signed int); int vec_all_ne (vector unsigned int, vector bool int); int vec_all_ne (vector unsigned int, vector unsigned int); int vec_all_ne (vector bool int, vector bool int); int vec_all_ne (vector bool int, vector unsigned int); int vec_all_ne (vector bool int, vector signed int); int vec_all_ne (vector float, vector float); int vec_all_nge (vector float, vector float); int vec_all_ngt (vector float, vector float); int vec_all_nle (vector float, vector float); int vec_all_nlt (vector float, vector float); int vec_all_numeric (vector float); int vec_any_eq (vector signed char, vector bool char); int vec_any_eq (vector signed char, vector signed char); int vec_any_eq (vector unsigned char, vector bool char); int vec_any_eq (vector unsigned char, vector unsigned char); int vec_any_eq (vector bool char, vector bool char); int vec_any_eq (vector bool char, vector unsigned char); int vec_any_eq (vector bool char, vector signed char); int vec_any_eq (vector signed short, vector bool short); int vec_any_eq (vector signed short, vector signed short); int vec_any_eq (vector unsigned short, vector bool short); int vec_any_eq (vector unsigned short, vector unsigned short); int vec_any_eq (vector bool short, vector bool short); int vec_any_eq (vector bool short, vector unsigned short); int vec_any_eq (vector bool short, vector signed short); int vec_any_eq (vector pixel, vector pixel); int vec_any_eq (vector signed int, vector bool int); int vec_any_eq (vector signed int, vector signed int); int vec_any_eq (vector unsigned int, vector bool int); int vec_any_eq (vector unsigned int, vector unsigned int); int vec_any_eq (vector bool int, vector bool int); int vec_any_eq (vector bool int, vector unsigned int); int vec_any_eq (vector bool int, vector signed int); int vec_any_eq (vector float, vector float); int vec_any_ge (vector signed char, vector bool char); int vec_any_ge (vector unsigned char, vector bool char); int vec_any_ge (vector unsigned char, vector unsigned char); int vec_any_ge (vector signed char, vector signed char); int vec_any_ge (vector bool char, vector unsigned char); int vec_any_ge (vector bool char, vector signed char); int vec_any_ge (vector unsigned short, vector bool short); int vec_any_ge (vector unsigned short, vector unsigned short); int vec_any_ge (vector signed short, vector signed short); int vec_any_ge (vector signed short, vector bool short); int vec_any_ge (vector bool short, vector unsigned short); int vec_any_ge (vector bool short, vector signed short); int vec_any_ge (vector signed int, vector bool int); int vec_any_ge (vector unsigned int, vector bool int); int vec_any_ge (vector unsigned int, vector unsigned int); int vec_any_ge (vector signed int, vector signed int); int vec_any_ge (vector bool int, vector unsigned int); int vec_any_ge (vector bool int, vector signed int); int vec_any_ge (vector float, vector float); int vec_any_gt (vector bool char, vector unsigned char); int vec_any_gt (vector unsigned char, vector bool char); int vec_any_gt (vector unsigned char, vector unsigned char); int vec_any_gt (vector bool char, vector signed char); int vec_any_gt (vector signed char, vector bool char); int vec_any_gt (vector signed char, vector signed char); int vec_any_gt (vector bool short, vector unsigned short); int vec_any_gt (vector unsigned short, vector bool short); int vec_any_gt (vector unsigned short, vector unsigned short); int vec_any_gt (vector bool short, vector signed short); int vec_any_gt (vector signed short, vector bool short); int vec_any_gt (vector signed short, vector signed short); int vec_any_gt (vector bool int, vector unsigned int); int vec_any_gt (vector unsigned int, vector bool int); int vec_any_gt (vector unsigned int, vector unsigned int); int vec_any_gt (vector bool int, vector signed int); int vec_any_gt (vector signed int, vector bool int); int vec_any_gt (vector signed int, vector signed int); int vec_any_gt (vector float, vector float); int vec_any_le (vector bool char, vector unsigned char); int vec_any_le (vector unsigned char, vector bool char); int vec_any_le (vector unsigned char, vector unsigned char); int vec_any_le (vector bool char, vector signed char); int vec_any_le (vector signed char, vector bool char); int vec_any_le (vector signed char, vector signed char); int vec_any_le (vector bool short, vector unsigned short); int vec_any_le (vector unsigned short, vector bool short); int vec_any_le (vector unsigned short, vector unsigned short); int vec_any_le (vector bool short, vector signed short); int vec_any_le (vector signed short, vector bool short); int vec_any_le (vector signed short, vector signed short); int vec_any_le (vector bool int, vector unsigned int); int vec_any_le (vector unsigned int, vector bool int); int vec_any_le (vector unsigned int, vector unsigned int); int vec_any_le (vector bool int, vector signed int); int vec_any_le (vector signed int, vector bool int); int vec_any_le (vector signed int, vector signed int); int vec_any_le (vector float, vector float); int vec_any_lt (vector bool char, vector unsigned char); int vec_any_lt (vector unsigned char, vector bool char); int vec_any_lt (vector unsigned char, vector unsigned char); int vec_any_lt (vector bool char, vector signed char); int vec_any_lt (vector signed char, vector bool char); int vec_any_lt (vector signed char, vector signed char); int vec_any_lt (vector bool short, vector unsigned short); int vec_any_lt (vector unsigned short, vector bool short); int vec_any_lt (vector unsigned short, vector unsigned short); int vec_any_lt (vector bool short, vector signed short); int vec_any_lt (vector signed short, vector bool short); int vec_any_lt (vector signed short, vector signed short); int vec_any_lt (vector bool int, vector unsigned int); int vec_any_lt (vector unsigned int, vector bool int); int vec_any_lt (vector unsigned int, vector unsigned int); int vec_any_lt (vector bool int, vector signed int); int vec_any_lt (vector signed int, vector bool int); int vec_any_lt (vector signed int, vector signed int); int vec_any_lt (vector float, vector float); int vec_any_nan (vector float); int vec_any_ne (vector signed char, vector bool char); int vec_any_ne (vector signed char, vector signed char); int vec_any_ne (vector unsigned char, vector bool char); int vec_any_ne (vector unsigned char, vector unsigned char); int vec_any_ne (vector bool char, vector bool char); int vec_any_ne (vector bool char, vector unsigned char); int vec_any_ne (vector bool char, vector signed char); int vec_any_ne (vector signed short, vector bool short); int vec_any_ne (vector signed short, vector signed short); int vec_any_ne (vector unsigned short, vector bool short); int vec_any_ne (vector unsigned short, vector unsigned short); int vec_any_ne (vector bool short, vector bool short); int vec_any_ne (vector bool short, vector unsigned short); int vec_any_ne (vector bool short, vector signed short); int vec_any_ne (vector pixel, vector pixel); int vec_any_ne (vector signed int, vector bool int); int vec_any_ne (vector signed int, vector signed int); int vec_any_ne (vector unsigned int, vector bool int); int vec_any_ne (vector unsigned int, vector unsigned int); int vec_any_ne (vector bool int, vector bool int); int vec_any_ne (vector bool int, vector unsigned int); int vec_any_ne (vector bool int, vector signed int); int vec_any_ne (vector float, vector float); int vec_any_nge (vector float, vector float); int vec_any_ngt (vector float, vector float); int vec_any_nle (vector float, vector float); int vec_any_nlt (vector float, vector float); int vec_any_numeric (vector float); int vec_any_out (vector float, vector float); @end smallexample @node SPARC VIS Built-in Functions @subsection SPARC VIS Built-in Functions GCC supports SIMD operations on the SPARC using both the generic vector extensions (@pxref{Vector Extensions}) as well as built-in functions for the SPARC Visual Instruction Set (VIS). When you use the @option{-mvis} switch, the VIS extension is exposed as the following built-in functions: @smallexample typedef int v2si __attribute__ ((vector_size (8))); typedef short v4hi __attribute__ ((vector_size (8))); typedef short v2hi __attribute__ ((vector_size (4))); typedef char v8qi __attribute__ ((vector_size (8))); typedef char v4qi __attribute__ ((vector_size (4))); void * __builtin_vis_alignaddr (void *, long); int64_t __builtin_vis_faligndatadi (int64_t, int64_t); v2si __builtin_vis_faligndatav2si (v2si, v2si); v4hi __builtin_vis_faligndatav4hi (v4si, v4si); v8qi __builtin_vis_faligndatav8qi (v8qi, v8qi); v4hi __builtin_vis_fexpand (v4qi); v4hi __builtin_vis_fmul8x16 (v4qi, v4hi); v4hi __builtin_vis_fmul8x16au (v4qi, v4hi); v4hi __builtin_vis_fmul8x16al (v4qi, v4hi); v4hi __builtin_vis_fmul8sux16 (v8qi, v4hi); v4hi __builtin_vis_fmul8ulx16 (v8qi, v4hi); v2si __builtin_vis_fmuld8sux16 (v4qi, v2hi); v2si __builtin_vis_fmuld8ulx16 (v4qi, v2hi); v4qi __builtin_vis_fpack16 (v4hi); v8qi __builtin_vis_fpack32 (v2si, v2si); v2hi __builtin_vis_fpackfix (v2si); v8qi __builtin_vis_fpmerge (v4qi, v4qi); int64_t __builtin_vis_pdist (v8qi, v8qi, int64_t); @end smallexample @node Target Format Checks @section Format Checks Specific to Particular Target Machines For some target machines, GCC supports additional options to the format attribute (@pxref{Function Attributes,,Declaring Attributes of Functions}). @menu * Solaris Format Checks:: @end menu @node Solaris Format Checks @subsection Solaris Format Checks Solaris targets support the @code{cmn_err} (or @code{__cmn_err__}) format check. @code{cmn_err} accepts a subset of the standard @code{printf} conversions, and the two-argument @code{%b} conversion for displaying bit-fields. See the Solaris man page for @code{cmn_err} for more information. @node Pragmas @section Pragmas Accepted by GCC @cindex pragmas @cindex #pragma GCC supports several types of pragmas, primarily in order to compile code originally written for other compilers. Note that in general we do not recommend the use of pragmas; @xref{Function Attributes}, for further explanation. @menu * ARM Pragmas:: * M32C Pragmas:: * RS/6000 and PowerPC Pragmas:: * Darwin Pragmas:: * Solaris Pragmas:: * Symbol-Renaming Pragmas:: * Structure-Packing Pragmas:: * Weak Pragmas:: * Diagnostic Pragmas:: * Visibility Pragmas:: @end menu @node ARM Pragmas @subsection ARM Pragmas The ARM target defines pragmas for controlling the default addition of @code{long_call} and @code{short_call} attributes to functions. @xref{Function Attributes}, for information about the effects of these attributes. @table @code @item long_calls @cindex pragma, long_calls Set all subsequent functions to have the @code{long_call} attribute. @item no_long_calls @cindex pragma, no_long_calls Set all subsequent functions to have the @code{short_call} attribute. @item long_calls_off @cindex pragma, long_calls_off Do not affect the @code{long_call} or @code{short_call} attributes of subsequent functions. @end table @node M32C Pragmas @subsection M32C Pragmas @table @code @item memregs @var{number} @cindex pragma, memregs Overrides the command line option @code{-memregs=} for the current file. Use with care! This pragma must be before any function in the file, and mixing different memregs values in different objects may make them incompatible. This pragma is useful when a performance-critical function uses a memreg for temporary values, as it may allow you to reduce the number of memregs used. @end table @node RS/6000 and PowerPC Pragmas @subsection RS/6000 and PowerPC Pragmas The RS/6000 and PowerPC targets define one pragma for controlling whether or not the @code{longcall} attribute is added to function declarations by default. This pragma overrides the @option{-mlongcall} option, but not the @code{longcall} and @code{shortcall} attributes. @xref{RS/6000 and PowerPC Options}, for more information about when long calls are and are not necessary. @table @code @item longcall (1) @cindex pragma, longcall Apply the @code{longcall} attribute to all subsequent function declarations. @item longcall (0) Do not apply the @code{longcall} attribute to subsequent function declarations. @end table @c Describe c4x pragmas here. @c Describe h8300 pragmas here. @c Describe sh pragmas here. @c Describe v850 pragmas here. @node Darwin Pragmas @subsection Darwin Pragmas The following pragmas are available for all architectures running the Darwin operating system. These are useful for compatibility with other Mac OS compilers. @table @code @item mark @var{tokens}@dots{} @cindex pragma, mark This pragma is accepted, but has no effect. @item options align=@var{alignment} @cindex pragma, options align This pragma sets the alignment of fields in structures. The values of @var{alignment} may be @code{mac68k}, to emulate m68k alignment, or @code{power}, to emulate PowerPC alignment. Uses of this pragma nest properly; to restore the previous setting, use @code{reset} for the @var{alignment}. @item segment @var{tokens}@dots{} @cindex pragma, segment This pragma is accepted, but has no effect. @item unused (@var{var} [, @var{var}]@dots{}) @cindex pragma, unused This pragma declares variables to be possibly unused. GCC will not produce warnings for the listed variables. The effect is similar to that of the @code{unused} attribute, except that this pragma may appear anywhere within the variables' scopes. @end table @node Solaris Pragmas @subsection Solaris Pragmas The Solaris target supports @code{#pragma redefine_extname} (@pxref{Symbol-Renaming Pragmas}). It also supports additional @code{#pragma} directives for compatibility with the system compiler. @table @code @item align @var{alignment} (@var{variable} [, @var{variable}]...) @cindex pragma, align Increase the minimum alignment of each @var{variable} to @var{alignment}. This is the same as GCC's @code{aligned} attribute @pxref{Variable Attributes}). Macro expansion occurs on the arguments to this pragma when compiling C. It does not currently occur when compiling C++, but this is a bug which may be fixed in a future release. @item fini (@var{function} [, @var{function}]...) @cindex pragma, fini This pragma causes each listed @var{function} to be called after main, or during shared module unloading, by adding a call to the @code{.fini} section. @item init (@var{function} [, @var{function}]...) @cindex pragma, init This pragma causes each listed @var{function} to be called during initialization (before @code{main}) or during shared module loading, by adding a call to the @code{.init} section. @end table @node Symbol-Renaming Pragmas @subsection Symbol-Renaming Pragmas For compatibility with the Solaris and Tru64 UNIX system headers, GCC supports two @code{#pragma} directives which change the name used in assembly for a given declaration. These pragmas are only available on platforms whose system headers need them. To get this effect on all platforms supported by GCC, use the asm labels extension (@pxref{Asm Labels}). @table @code @item redefine_extname @var{oldname} @var{newname} @cindex pragma, redefine_extname This pragma gives the C function @var{oldname} the assembly symbol @var{newname}. The preprocessor macro @code{__PRAGMA_REDEFINE_EXTNAME} will be defined if this pragma is available (currently only on Solaris). @item extern_prefix @var{string} @cindex pragma, extern_prefix This pragma causes all subsequent external function and variable declarations to have @var{string} prepended to their assembly symbols. This effect may be terminated with another @code{extern_prefix} pragma whose argument is an empty string. The preprocessor macro @code{__PRAGMA_EXTERN_PREFIX} will be defined if this pragma is available (currently only on Tru64 UNIX)@. @end table These pragmas and the asm labels extension interact in a complicated manner. Here are some corner cases you may want to be aware of. @enumerate @item Both pragmas silently apply only to declarations with external linkage. Asm labels do not have this restriction. @item In C++, both pragmas silently apply only to declarations with ``C'' linkage. Again, asm labels do not have this restriction. @item If any of the three ways of changing the assembly name of a declaration is applied to a declaration whose assembly name has already been determined (either by a previous use of one of these features, or because the compiler needed the assembly name in order to generate code), and the new name is different, a warning issues and the name does not change. @item The @var{oldname} used by @code{#pragma redefine_extname} is always the C-language name. @item If @code{#pragma extern_prefix} is in effect, and a declaration occurs with an asm label attached, the prefix is silently ignored for that declaration. @item If @code{#pragma extern_prefix} and @code{#pragma redefine_extname} apply to the same declaration, whichever triggered first wins, and a warning issues if they contradict each other. (We would like to have @code{#pragma redefine_extname} always win, for consistency with asm labels, but if @code{#pragma extern_prefix} triggers first we have no way of knowing that that happened.) @end enumerate @node Structure-Packing Pragmas @subsection Structure-Packing Pragmas For compatibility with Win32, GCC supports a set of @code{#pragma} directives which change the maximum alignment of members of structures (other than zero-width bitfields), unions, and classes subsequently defined. The @var{n} value below always is required to be a small power of two and specifies the new alignment in bytes. @enumerate @item @code{#pragma pack(@var{n})} simply sets the new alignment. @item @code{#pragma pack()} sets the alignment to the one that was in effect when compilation started (see also command line option @option{-fpack-struct[=]} @pxref{Code Gen Options}). @item @code{#pragma pack(push[,@var{n}])} pushes the current alignment setting on an internal stack and then optionally sets the new alignment. @item @code{#pragma pack(pop)} restores the alignment setting to the one saved at the top of the internal stack (and removes that stack entry). Note that @code{#pragma pack([@var{n}])} does not influence this internal stack; thus it is possible to have @code{#pragma pack(push)} followed by multiple @code{#pragma pack(@var{n})} instances and finalized by a single @code{#pragma pack(pop)}. @end enumerate Some targets, e.g. i386 and powerpc, support the @code{ms_struct} @code{#pragma} which lays out a structure as the documented @code{__attribute__ ((ms_struct))}. @enumerate @item @code{#pragma ms_struct on} turns on the layout for structures declared. @item @code{#pragma ms_struct off} turns off the layout for structures declared. @item @code{#pragma ms_struct reset} goes back to the default layout. @end enumerate @node Weak Pragmas @subsection Weak Pragmas For compatibility with SVR4, GCC supports a set of @code{#pragma} directives for declaring symbols to be weak, and defining weak aliases. @table @code @item #pragma weak @var{symbol} @cindex pragma, weak This pragma declares @var{symbol} to be weak, as if the declaration had the attribute of the same name. The pragma may appear before or after the declaration of @var{symbol}, but must appear before either its first use or its definition. It is not an error for @var{symbol} to never be defined at all. @item #pragma weak @var{symbol1} = @var{symbol2} This pragma declares @var{symbol1} to be a weak alias of @var{symbol2}. It is an error if @var{symbol2} is not defined in the current translation unit. @end table @node Diagnostic Pragmas @subsection Diagnostic Pragmas GCC allows the user to selectively enable or disable certain types of diagnostics, and change the kind of the diagnostic. For example, a project's policy might require that all sources compile with @option{-Werror} but certain files might have exceptions allowing specific types of warnings. Or, a project might selectively enable diagnostics and treat them as errors depending on which preprocessor macros are defined. @table @code @item #pragma GCC diagnostic @var{kind} @var{option} @cindex pragma, diagnostic Modifies the disposition of a diagnostic. Note that not all diagnostics are modifiable; at the moment only warnings (normally controlled by @samp{-W...}) can be controlled, and not all of them. Use @option{-fdiagnostics-show-option} to determine which diagnostics are controllable and which option controls them. @var{kind} is @samp{error} to treat this diagnostic as an error, @samp{warning} to treat it like a warning (even if @option{-Werror} is in effect), or @samp{ignored} if the diagnostic is to be ignored. @var{option} is a double quoted string which matches the command line option. @example #pragma GCC diagnostic warning "-Wformat" #pragma GCC diagnostic error "-Wformat" #pragma GCC diagnostic ignored "-Wformat" @end example Note that these pragmas override any command line options. Also, while it is syntactically valid to put these pragmas anywhere in your sources, the only supported location for them is before any data or functions are defined. Doing otherwise may result in unpredictable results depending on how the optimizer manages your sources. If the same option is listed multiple times, the last one specified is the one that is in effect. This pragma is not intended to be a general purpose replacement for command line options, but for implementing strict control over project policies. @end table @node Visibility Pragmas @subsection Visibility Pragmas @table @code @item #pragma GCC visibility push(@var{visibility}) @itemx #pragma GCC visibility pop @cindex pragma, visibility This pragma allows the user to set the visibility for multiple declarations without having to give each a visibility attribute @xref{Function Attributes}, for more information about visibility and the attribute syntax. In C++, @samp{#pragma GCC visibility} affects only namespace-scope declarations. Class members and template specializations are not affected; if you want to override the visibility for a particular member or instantiation, you must use an attribute. @end table @node Unnamed Fields @section Unnamed struct/union fields within structs/unions @cindex struct @cindex union For compatibility with other compilers, GCC allows you to define a structure or union that contains, as fields, structures and unions without names. For example: @smallexample struct @{ int a; union @{ int b; float c; @}; int d; @} foo; @end smallexample In this example, the user would be able to access members of the unnamed union with code like @samp{foo.b}. Note that only unnamed structs and unions are allowed, you may not have, for example, an unnamed @code{int}. You must never create such structures that cause ambiguous field definitions. For example, this structure: @smallexample struct @{ int a; struct @{ int a; @}; @} foo; @end smallexample It is ambiguous which @code{a} is being referred to with @samp{foo.a}. Such constructs are not supported and must be avoided. In the future, such constructs may be detected and treated as compilation errors. @opindex fms-extensions Unless @option{-fms-extensions} is used, the unnamed field must be a structure or union definition without a tag (for example, @samp{struct @{ int a; @};}). If @option{-fms-extensions} is used, the field may also be a definition with a tag such as @samp{struct foo @{ int a; @};}, a reference to a previously defined structure or union such as @samp{struct foo;}, or a reference to a @code{typedef} name for a previously defined structure or union type. @node Thread-Local @section Thread-Local Storage @cindex Thread-Local Storage @cindex @acronym{TLS} @cindex __thread Thread-local storage (@acronym{TLS}) is a mechanism by which variables are allocated such that there is one instance of the variable per extant thread. The run-time model GCC uses to implement this originates in the IA-64 processor-specific ABI, but has since been migrated to other processors as well. It requires significant support from the linker (@command{ld}), dynamic linker (@command{ld.so}), and system libraries (@file{libc.so} and @file{libpthread.so}), so it is not available everywhere. At the user level, the extension is visible with a new storage class keyword: @code{__thread}. For example: @smallexample __thread int i; extern __thread struct state s; static __thread char *p; @end smallexample The @code{__thread} specifier may be used alone, with the @code{extern} or @code{static} specifiers, but with no other storage class specifier. When used with @code{extern} or @code{static}, @code{__thread} must appear immediately after the other storage class specifier. The @code{__thread} specifier may be applied to any global, file-scoped static, function-scoped static, or static data member of a class. It may not be applied to block-scoped automatic or non-static data member. When the address-of operator is applied to a thread-local variable, it is evaluated at run-time and returns the address of the current thread's instance of that variable. An address so obtained may be used by any thread. When a thread terminates, any pointers to thread-local variables in that thread become invalid. No static initialization may refer to the address of a thread-local variable. In C++, if an initializer is present for a thread-local variable, it must be a @var{constant-expression}, as defined in 5.19.2 of the ANSI/ISO C++ standard. See @uref{http://people.redhat.com/drepper/tls.pdf, ELF Handling For Thread-Local Storage} for a detailed explanation of the four thread-local storage addressing models, and how the run-time is expected to function. @menu * C99 Thread-Local Edits:: * C++98 Thread-Local Edits:: @end menu @node C99 Thread-Local Edits @subsection ISO/IEC 9899:1999 Edits for Thread-Local Storage The following are a set of changes to ISO/IEC 9899:1999 (aka C99) that document the exact semantics of the language extension. @itemize @bullet @item @cite{5.1.2 Execution environments} Add new text after paragraph 1 @quotation Within either execution environment, a @dfn{thread} is a flow of control within a program. It is implementation defined whether or not there may be more than one thread associated with a program. It is implementation defined how threads beyond the first are created, the name and type of the function called at thread startup, and how threads may be terminated. However, objects with thread storage duration shall be initialized before thread startup. @end quotation @item @cite{6.2.4 Storage durations of objects} Add new text before paragraph 3 @quotation An object whose identifier is declared with the storage-class specifier @w{@code{__thread}} has @dfn{thread storage duration}. Its lifetime is the entire execution of the thread, and its stored value is initialized only once, prior to thread startup. @end quotation @item @cite{6.4.1 Keywords} Add @code{__thread}. @item @cite{6.7.1 Storage-class specifiers} Add @code{__thread} to the list of storage class specifiers in paragraph 1. Change paragraph 2 to @quotation With the exception of @code{__thread}, at most one storage-class specifier may be given [@dots{}]. The @code{__thread} specifier may be used alone, or immediately following @code{extern} or @code{static}. @end quotation Add new text after paragraph 6 @quotation The declaration of an identifier for a variable that has block scope that specifies @code{__thread} shall also specify either @code{extern} or @code{static}. The @code{__thread} specifier shall be used only with variables. @end quotation @end itemize @node C++98 Thread-Local Edits @subsection ISO/IEC 14882:1998 Edits for Thread-Local Storage The following are a set of changes to ISO/IEC 14882:1998 (aka C++98) that document the exact semantics of the language extension. @itemize @bullet @item @b{[intro.execution]} New text after paragraph 4 @quotation A @dfn{thread} is a flow of control within the abstract machine. It is implementation defined whether or not there may be more than one thread. @end quotation New text after paragraph 7 @quotation It is unspecified whether additional action must be taken to ensure when and whether side effects are visible to other threads. @end quotation @item @b{[lex.key]} Add @code{__thread}. @item @b{[basic.start.main]} Add after paragraph 5 @quotation The thread that begins execution at the @code{main} function is called the @dfn{main thread}. It is implementation defined how functions beginning threads other than the main thread are designated or typed. A function so designated, as well as the @code{main} function, is called a @dfn{thread startup function}. It is implementation defined what happens if a thread startup function returns. It is implementation defined what happens to other threads when any thread calls @code{exit}. @end quotation @item @b{[basic.start.init]} Add after paragraph 4 @quotation The storage for an object of thread storage duration shall be statically initialized before the first statement of the thread startup function. An object of thread storage duration shall not require dynamic initialization. @end quotation @item @b{[basic.start.term]} Add after paragraph 3 @quotation The type of an object with thread storage duration shall not have a non-trivial destructor, nor shall it be an array type whose elements (directly or indirectly) have non-trivial destructors. @end quotation @item @b{[basic.stc]} Add ``thread storage duration'' to the list in paragraph 1. Change paragraph 2 @quotation Thread, static, and automatic storage durations are associated with objects introduced by declarations [@dots{}]. @end quotation Add @code{__thread} to the list of specifiers in paragraph 3. @item @b{[basic.stc.thread]} New section before @b{[basic.stc.static]} @quotation The keyword @code{__thread} applied to a non-local object gives the object thread storage duration. A local variable or class data member declared both @code{static} and @code{__thread} gives the variable or member thread storage duration. @end quotation @item @b{[basic.stc.static]} Change paragraph 1 @quotation All objects which have neither thread storage duration, dynamic storage duration nor are local [@dots{}]. @end quotation @item @b{[dcl.stc]} Add @code{__thread} to the list in paragraph 1. Change paragraph 1 @quotation With the exception of @code{__thread}, at most one @var{storage-class-specifier} shall appear in a given @var{decl-specifier-seq}. The @code{__thread} specifier may be used alone, or immediately following the @code{extern} or @code{static} specifiers. [@dots{}] @end quotation Add after paragraph 5 @quotation The @code{__thread} specifier can be applied only to the names of objects and to anonymous unions. @end quotation @item @b{[class.mem]} Add after paragraph 6 @quotation Non-@code{static} members shall not be @code{__thread}. @end quotation @end itemize + +@node Binary constants +@section Binary constants using the @samp{0b} prefix +@cindex Binary constants using the @samp{0b} prefix + +Integer constants can be written as binary constants, consisting of a +sequence of @samp{0} and @samp{1} digits, prefixed by @samp{0b} or +@samp{0B}. This is particularly useful in environments that operate a +lot on the bit-level (like microcontrollers). + +The following statements are identical: + +@smallexample +i = 42; +i = 0x2a; +i = 052; +i = 0b101010; +@end smallexample + +The type of these constants follows the same rules as for octal or +hexadecimal integer constants, so suffixes like @samp{L} or @samp{UL} +can be applied. @node C++ Extensions @chapter Extensions to the C++ Language @cindex extensions, C++ language @cindex C++ language extensions The GNU compiler provides these extensions to the C++ language (and you can also use most of the C language extensions in your C++ programs). If you want to write code that checks whether these features are available, you can test for the GNU compiler the same way as for C programs: check for a predefined macro @code{__GNUC__}. You can also use @code{__GNUG__} to test specifically for GNU C++ (@pxref{Common Predefined Macros,, Predefined Macros,cpp,The GNU C Preprocessor}). @menu * Volatiles:: What constitutes an access to a volatile object. * Restricted Pointers:: C99 restricted pointers and references. * Vague Linkage:: Where G++ puts inlines, vtables and such. * C++ Interface:: You can use a single C++ header file for both declarations and definitions. * Template Instantiation:: Methods for ensuring that exactly one copy of each needed template instantiation is emitted. * Bound member functions:: You can extract a function pointer to the method denoted by a @samp{->*} or @samp{.*} expression. * C++ Attributes:: Variable, function, and type attributes for C++ only. * Namespace Association:: Strong using-directives for namespace association. * Java Exceptions:: Tweaking exception handling to work with Java. * Deprecated Features:: Things will disappear from g++. * Backwards Compatibility:: Compatibilities with earlier definitions of C++. @end menu @node Volatiles @section When is a Volatile Object Accessed? @cindex accessing volatiles @cindex volatile read @cindex volatile write @cindex volatile access Both the C and C++ standard have the concept of volatile objects. These are normally accessed by pointers and used for accessing hardware. The standards encourage compilers to refrain from optimizations concerning accesses to volatile objects. The C standard leaves it implementation defined as to what constitutes a volatile access. The C++ standard omits to specify this, except to say that C++ should behave in a similar manner to C with respect to volatiles, where possible. The minimum either standard specifies is that at a sequence point all previous accesses to volatile objects have stabilized and no subsequent accesses have occurred. Thus an implementation is free to reorder and combine volatile accesses which occur between sequence points, but cannot do so for accesses across a sequence point. The use of volatiles does not allow you to violate the restriction on updating objects multiple times within a sequence point. @xref{Qualifiers implementation, , Volatile qualifier and the C compiler}. The behavior differs slightly between C and C++ in the non-obvious cases: @smallexample volatile int *src = @var{somevalue}; *src; @end smallexample With C, such expressions are rvalues, and GCC interprets this either as a read of the volatile object being pointed to or only as request to evaluate the side-effects. The C++ standard specifies that such expressions do not undergo lvalue to rvalue conversion, and that the type of the dereferenced object may be incomplete. The C++ standard does not specify explicitly that it is this lvalue to rvalue conversion which may be responsible for causing an access. However, there is reason to believe that it is, because otherwise certain simple expressions become undefined. However, because it would surprise most programmers, G++ treats dereferencing a pointer to volatile object of complete type when the value is unused as GCC would do for an equivalent type in C. When the object has incomplete type, G++ issues a warning; if you wish to force an error, you must force a conversion to rvalue with, for instance, a static cast. When using a reference to volatile, G++ does not treat equivalent expressions as accesses to volatiles, but instead issues a warning that no volatile is accessed. The rationale for this is that otherwise it becomes difficult to determine where volatile access occur, and not possible to ignore the return value from functions returning volatile references. Again, if you wish to force a read, cast the reference to an rvalue. @node Restricted Pointers @section Restricting Pointer Aliasing @cindex restricted pointers @cindex restricted references @cindex restricted this pointer As with the C front end, G++ understands the C99 feature of restricted pointers, specified with the @code{__restrict__}, or @code{__restrict} type qualifier. Because you cannot compile C++ by specifying the @option{-std=c99} language flag, @code{restrict} is not a keyword in C++. In addition to allowing restricted pointers, you can specify restricted references, which indicate that the reference is not aliased in the local context. @smallexample void fn (int *__restrict__ rptr, int &__restrict__ rref) @{ /* @r{@dots{}} */ @} @end smallexample @noindent In the body of @code{fn}, @var{rptr} points to an unaliased integer and @var{rref} refers to a (different) unaliased integer. You may also specify whether a member function's @var{this} pointer is unaliased by using @code{__restrict__} as a member function qualifier. @smallexample void T::fn () __restrict__ @{ /* @r{@dots{}} */ @} @end smallexample @noindent Within the body of @code{T::fn}, @var{this} will have the effective definition @code{T *__restrict__ const this}. Notice that the interpretation of a @code{__restrict__} member function qualifier is different to that of @code{const} or @code{volatile} qualifier, in that it is applied to the pointer rather than the object. This is consistent with other compilers which implement restricted pointers. As with all outermost parameter qualifiers, @code{__restrict__} is ignored in function definition matching. This means you only need to specify @code{__restrict__} in a function definition, rather than in a function prototype as well. @node Vague Linkage @section Vague Linkage @cindex vague linkage There are several constructs in C++ which require space in the object file but are not clearly tied to a single translation unit. We say that these constructs have ``vague linkage''. Typically such constructs are emitted wherever they are needed, though sometimes we can be more clever. @table @asis @item Inline Functions Inline functions are typically defined in a header file which can be included in many different compilations. Hopefully they can usually be inlined, but sometimes an out-of-line copy is necessary, if the address of the function is taken or if inlining fails. In general, we emit an out-of-line copy in all translation units where one is needed. As an exception, we only emit inline virtual functions with the vtable, since it will always require a copy. Local static variables and string constants used in an inline function are also considered to have vague linkage, since they must be shared between all inlined and out-of-line instances of the function. @item VTables @cindex vtable C++ virtual functions are implemented in most compilers using a lookup table, known as a vtable. The vtable contains pointers to the virtual functions provided by a class, and each object of the class contains a pointer to its vtable (or vtables, in some multiple-inheritance situations). If the class declares any non-inline, non-pure virtual functions, the first one is chosen as the ``key method'' for the class, and the vtable is only emitted in the translation unit where the key method is defined. @emph{Note:} If the chosen key method is later defined as inline, the vtable will still be emitted in every translation unit which defines it. Make sure that any inline virtuals are declared inline in the class body, even if they are not defined there. @item type_info objects @cindex type_info @cindex RTTI C++ requires information about types to be written out in order to implement @samp{dynamic_cast}, @samp{typeid} and exception handling. For polymorphic classes (classes with virtual functions), the type_info object is written out along with the vtable so that @samp{dynamic_cast} can determine the dynamic type of a class object at runtime. For all other types, we write out the type_info object when it is used: when applying @samp{typeid} to an expression, throwing an object, or referring to a type in a catch clause or exception specification. @item Template Instantiations Most everything in this section also applies to template instantiations, but there are other options as well. @xref{Template Instantiation,,Where's the Template?}. @end table When used with GNU ld version 2.8 or later on an ELF system such as GNU/Linux or Solaris 2, or on Microsoft Windows, duplicate copies of these constructs will be discarded at link time. This is known as COMDAT support. On targets that don't support COMDAT, but do support weak symbols, GCC will use them. This way one copy will override all the others, but the unused copies will still take up space in the executable. For targets which do not support either COMDAT or weak symbols, most entities with vague linkage will be emitted as local symbols to avoid duplicate definition errors from the linker. This will not happen for local statics in inlines, however, as having multiple copies will almost certainly break things. @xref{C++ Interface,,Declarations and Definitions in One Header}, for another way to control placement of these constructs. @node C++ Interface @section #pragma interface and implementation @cindex interface and implementation headers, C++ @cindex C++ interface and implementation headers @cindex pragmas, interface and implementation @code{#pragma interface} and @code{#pragma implementation} provide the user with a way of explicitly directing the compiler to emit entities with vague linkage (and debugging information) in a particular translation unit. @emph{Note:} As of GCC 2.7.2, these @code{#pragma}s are not useful in most cases, because of COMDAT support and the ``key method'' heuristic mentioned in @ref{Vague Linkage}. Using them can actually cause your program to grow due to unnecessary out-of-line copies of inline functions. Currently (3.4) the only benefit of these @code{#pragma}s is reduced duplication of debugging information, and that should be addressed soon on DWARF 2 targets with the use of COMDAT groups. @table @code @item #pragma interface @itemx #pragma interface "@var{subdir}/@var{objects}.h" @kindex #pragma interface Use this directive in @emph{header files} that define object classes, to save space in most of the object files that use those classes. Normally, local copies of certain information (backup copies of inline member functions, debugging information, and the internal tables that implement virtual functions) must be kept in each object file that includes class definitions. You can use this pragma to avoid such duplication. When a header file containing @samp{#pragma interface} is included in a compilation, this auxiliary information will not be generated (unless the main input source file itself uses @samp{#pragma implementation}). Instead, the object files will contain references to be resolved at link time. The second form of this directive is useful for the case where you have multiple headers with the same name in different directories. If you use this form, you must specify the same string to @samp{#pragma implementation}. @item #pragma implementation @itemx #pragma implementation "@var{objects}.h" @kindex #pragma implementation Use this pragma in a @emph{main input file}, when you want full output from included header files to be generated (and made globally visible). The included header file, in turn, should use @samp{#pragma interface}. Backup copies of inline member functions, debugging information, and the internal tables used to implement virtual functions are all generated in implementation files. @cindex implied @code{#pragma implementation} @cindex @code{#pragma implementation}, implied @cindex naming convention, implementation headers If you use @samp{#pragma implementation} with no argument, it applies to an include file with the same basename@footnote{A file's @dfn{basename} was the name stripped of all leading path information and of trailing suffixes, such as @samp{.h} or @samp{.C} or @samp{.cc}.} as your source file. For example, in @file{allclass.cc}, giving just @samp{#pragma implementation} by itself is equivalent to @samp{#pragma implementation "allclass.h"}. In versions of GNU C++ prior to 2.6.0 @file{allclass.h} was treated as an implementation file whenever you would include it from @file{allclass.cc} even if you never specified @samp{#pragma implementation}. This was deemed to be more trouble than it was worth, however, and disabled. Use the string argument if you want a single implementation file to include code from multiple header files. (You must also use @samp{#include} to include the header file; @samp{#pragma implementation} only specifies how to use the file---it doesn't actually include it.) There is no way to split up the contents of a single header file into multiple implementation files. @end table @cindex inlining and C++ pragmas @cindex C++ pragmas, effect on inlining @cindex pragmas in C++, effect on inlining @samp{#pragma implementation} and @samp{#pragma interface} also have an effect on function inlining. If you define a class in a header file marked with @samp{#pragma interface}, the effect on an inline function defined in that class is similar to an explicit @code{extern} declaration---the compiler emits no code at all to define an independent version of the function. Its definition is used only for inlining with its callers. @opindex fno-implement-inlines Conversely, when you include the same header file in a main source file that declares it as @samp{#pragma implementation}, the compiler emits code for the function itself; this defines a version of the function that can be found via pointers (or by callers compiled without inlining). If all calls to the function can be inlined, you can avoid emitting the function by compiling with @option{-fno-implement-inlines}. If any calls were not inlined, you will get linker errors. @node Template Instantiation @section Where's the Template? @cindex template instantiation C++ templates are the first language feature to require more intelligence from the environment than one usually finds on a UNIX system. Somehow the compiler and linker have to make sure that each template instance occurs exactly once in the executable if it is needed, and not at all otherwise. There are two basic approaches to this problem, which are referred to as the Borland model and the Cfront model. @table @asis @item Borland model Borland C++ solved the template instantiation problem by adding the code equivalent of common blocks to their linker; the compiler emits template instances in each translation unit that uses them, and the linker collapses them together. The advantage of this model is that the linker only has to consider the object files themselves; there is no external complexity to worry about. This disadvantage is that compilation time is increased because the template code is being compiled repeatedly. Code written for this model tends to include definitions of all templates in the header file, since they must be seen to be instantiated. @item Cfront model The AT&T C++ translator, Cfront, solved the template instantiation problem by creating the notion of a template repository, an automatically maintained place where template instances are stored. A more modern version of the repository works as follows: As individual object files are built, the compiler places any template definitions and instantiations encountered in the repository. At link time, the link wrapper adds in the objects in the repository and compiles any needed instances that were not previously emitted. The advantages of this model are more optimal compilation speed and the ability to use the system linker; to implement the Borland model a compiler vendor also needs to replace the linker. The disadvantages are vastly increased complexity, and thus potential for error; for some code this can be just as transparent, but in practice it can been very difficult to build multiple programs in one directory and one program in multiple directories. Code written for this model tends to separate definitions of non-inline member templates into a separate file, which should be compiled separately. @end table When used with GNU ld version 2.8 or later on an ELF system such as GNU/Linux or Solaris 2, or on Microsoft Windows, G++ supports the Borland model. On other systems, G++ implements neither automatic model. A future version of G++ will support a hybrid model whereby the compiler will emit any instantiations for which the template definition is included in the compile, and store template definitions and instantiation context information into the object file for the rest. The link wrapper will extract that information as necessary and invoke the compiler to produce the remaining instantiations. The linker will then combine duplicate instantiations. In the mean time, you have the following options for dealing with template instantiations: @enumerate @item @opindex frepo Compile your template-using code with @option{-frepo}. The compiler will generate files with the extension @samp{.rpo} listing all of the template instantiations used in the corresponding object files which could be instantiated there; the link wrapper, @samp{collect2}, will then update the @samp{.rpo} files to tell the compiler where to place those instantiations and rebuild any affected object files. The link-time overhead is negligible after the first pass, as the compiler will continue to place the instantiations in the same files. This is your best option for application code written for the Borland model, as it will just work. Code written for the Cfront model will need to be modified so that the template definitions are available at one or more points of instantiation; usually this is as simple as adding @code{#include } to the end of each template header. For library code, if you want the library to provide all of the template instantiations it needs, just try to link all of its object files together; the link will fail, but cause the instantiations to be generated as a side effect. Be warned, however, that this may cause conflicts if multiple libraries try to provide the same instantiations. For greater control, use explicit instantiation as described in the next option. @item @opindex fno-implicit-templates Compile your code with @option{-fno-implicit-templates} to disable the implicit generation of template instances, and explicitly instantiate all the ones you use. This approach requires more knowledge of exactly which instances you need than do the others, but it's less mysterious and allows greater control. You can scatter the explicit instantiations throughout your program, perhaps putting them in the translation units where the instances are used or the translation units that define the templates themselves; you can put all of the explicit instantiations you need into one big file; or you can create small files like @smallexample #include "Foo.h" #include "Foo.cc" template class Foo; template ostream& operator << (ostream&, const Foo&); @end smallexample for each of the instances you need, and create a template instantiation library from those. If you are using Cfront-model code, you can probably get away with not using @option{-fno-implicit-templates} when compiling files that don't @samp{#include} the member template definitions. If you use one big file to do the instantiations, you may want to compile it without @option{-fno-implicit-templates} so you get all of the instances required by your explicit instantiations (but not by any other files) without having to specify them as well. G++ has extended the template instantiation syntax given in the ISO standard to allow forward declaration of explicit instantiations (with @code{extern}), instantiation of the compiler support data for a template class (i.e.@: the vtable) without instantiating any of its members (with @code{inline}), and instantiation of only the static data members of a template class, without the support data or member functions (with (@code{static}): @smallexample extern template int max (int, int); inline template class Foo; static template class Foo; @end smallexample @item Do nothing. Pretend G++ does implement automatic instantiation management. Code written for the Borland model will work fine, but each translation unit will contain instances of each of the templates it uses. In a large program, this can lead to an unacceptable amount of code duplication. @end enumerate @node Bound member functions @section Extracting the function pointer from a bound pointer to member function @cindex pmf @cindex pointer to member function @cindex bound pointer to member function In C++, pointer to member functions (PMFs) are implemented using a wide pointer of sorts to handle all the possible call mechanisms; the PMF needs to store information about how to adjust the @samp{this} pointer, and if the function pointed to is virtual, where to find the vtable, and where in the vtable to look for the member function. If you are using PMFs in an inner loop, you should really reconsider that decision. If that is not an option, you can extract the pointer to the function that would be called for a given object/PMF pair and call it directly inside the inner loop, to save a bit of time. Note that you will still be paying the penalty for the call through a function pointer; on most modern architectures, such a call defeats the branch prediction features of the CPU@. This is also true of normal virtual function calls. The syntax for this extension is @smallexample extern A a; extern int (A::*fp)(); typedef int (*fptr)(A *); fptr p = (fptr)(a.*fp); @end smallexample For PMF constants (i.e.@: expressions of the form @samp{&Klasse::Member}), no object is needed to obtain the address of the function. They can be converted to function pointers directly: @smallexample fptr p1 = (fptr)(&A::foo); @end smallexample @opindex Wno-pmf-conversions You must specify @option{-Wno-pmf-conversions} to use this extension. @node C++ Attributes @section C++-Specific Variable, Function, and Type Attributes Some attributes only make sense for C++ programs. @table @code @item init_priority (@var{priority}) @cindex init_priority attribute In Standard C++, objects defined at namespace scope are guaranteed to be initialized in an order in strict accordance with that of their definitions @emph{in a given translation unit}. No guarantee is made for initializations across translation units. However, GNU C++ allows users to control the order of initialization of objects defined at namespace scope with the @code{init_priority} attribute by specifying a relative @var{priority}, a constant integral expression currently bounded between 101 and 65535 inclusive. Lower numbers indicate a higher priority. In the following example, @code{A} would normally be created before @code{B}, but the @code{init_priority} attribute has reversed that order: @smallexample Some_Class A __attribute__ ((init_priority (2000))); Some_Class B __attribute__ ((init_priority (543))); @end smallexample @noindent Note that the particular values of @var{priority} do not matter; only their relative ordering. @item java_interface @cindex java_interface attribute This type attribute informs C++ that the class is a Java interface. It may only be applied to classes declared within an @code{extern "Java"} block. Calls to methods declared in this interface will be dispatched using GCJ's interface table mechanism, instead of regular virtual table dispatch. @end table See also @xref{Namespace Association}. @node Namespace Association @section Namespace Association @strong{Caution:} The semantics of this extension are not fully defined. Users should refrain from using this extension as its semantics may change subtly over time. It is possible that this extension will be removed in future versions of G++. A using-directive with @code{__attribute ((strong))} is stronger than a normal using-directive in two ways: @itemize @bullet @item Templates from the used namespace can be specialized and explicitly instantiated as though they were members of the using namespace. @item The using namespace is considered an associated namespace of all templates in the used namespace for purposes of argument-dependent name lookup. @end itemize The used namespace must be nested within the using namespace so that normal unqualified lookup works properly. This is useful for composing a namespace transparently from implementation namespaces. For example: @smallexample namespace std @{ namespace debug @{ template struct A @{ @}; @} using namespace debug __attribute ((__strong__)); template <> struct A @{ @}; // @r{ok to specialize} template void f (A); @} int main() @{ f (std::A()); // @r{lookup finds} std::f f (std::A()); @} @end smallexample @node Java Exceptions @section Java Exceptions The Java language uses a slightly different exception handling model from C++. Normally, GNU C++ will automatically detect when you are writing C++ code that uses Java exceptions, and handle them appropriately. However, if C++ code only needs to execute destructors when Java exceptions are thrown through it, GCC will guess incorrectly. Sample problematic code is: @smallexample struct S @{ ~S(); @}; extern void bar(); // @r{is written in Java, and may throw exceptions} void foo() @{ S s; bar(); @} @end smallexample @noindent The usual effect of an incorrect guess is a link failure, complaining of a missing routine called @samp{__gxx_personality_v0}. You can inform the compiler that Java exceptions are to be used in a translation unit, irrespective of what it might think, by writing @samp{@w{#pragma GCC java_exceptions}} at the head of the file. This @samp{#pragma} must appear before any functions that throw or catch exceptions, or run destructors when exceptions are thrown through them. You cannot mix Java and C++ exceptions in the same translation unit. It is believed to be safe to throw a C++ exception from one file through another file compiled for the Java exception model, or vice versa, but there may be bugs in this area. @node Deprecated Features @section Deprecated Features In the past, the GNU C++ compiler was extended to experiment with new features, at a time when the C++ language was still evolving. Now that the C++ standard is complete, some of those features are superseded by superior alternatives. Using the old features might cause a warning in some cases that the feature will be dropped in the future. In other cases, the feature might be gone already. While the list below is not exhaustive, it documents some of the options that are now deprecated: @table @code @item -fexternal-templates @itemx -falt-external-templates These are two of the many ways for G++ to implement template instantiation. @xref{Template Instantiation}. The C++ standard clearly defines how template definitions have to be organized across implementation units. G++ has an implicit instantiation mechanism that should work just fine for standard-conforming code. @item -fstrict-prototype @itemx -fno-strict-prototype Previously it was possible to use an empty prototype parameter list to indicate an unspecified number of parameters (like C), rather than no parameters, as C++ demands. This feature has been removed, except where it is required for backwards compatibility @xref{Backwards Compatibility}. @end table G++ allows a virtual function returning @samp{void *} to be overridden by one returning a different pointer type. This extension to the covariant return type rules is now deprecated and will be removed from a future version. The G++ minimum and maximum operators (@samp{?}) and their compound forms (@samp{?=}) have been deprecated and will be removed in a future version. Code using these operators should be modified to use @code{std::min} and @code{std::max} instead. The named return value extension has been deprecated, and is now removed from G++. The use of initializer lists with new expressions has been deprecated, and is now removed from G++. Floating and complex non-type template parameters have been deprecated, and are now removed from G++. The implicit typename extension has been deprecated and is now removed from G++. The use of default arguments in function pointers, function typedefs and other places where they are not permitted by the standard is deprecated and will be removed from a future version of G++. G++ allows floating-point literals to appear in integral constant expressions, e.g. @samp{ enum E @{ e = int(2.2 * 3.7) @} } This extension is deprecated and will be removed from a future version. G++ allows static data members of const floating-point type to be declared with an initializer in a class definition. The standard only allows initializers for static members of const integral types and const enumeration types so this extension has been deprecated and will be removed from a future version. @node Backwards Compatibility @section Backwards Compatibility @cindex Backwards Compatibility @cindex ARM [Annotated C++ Reference Manual] Now that there is a definitive ISO standard C++, G++ has a specification to adhere to. The C++ language evolved over time, and features that used to be acceptable in previous drafts of the standard, such as the ARM [Annotated C++ Reference Manual], are no longer accepted. In order to allow compilation of C++ written to such drafts, G++ contains some backwards compatibilities. @emph{All such backwards compatibility features are liable to disappear in future versions of G++.} They should be considered deprecated @xref{Deprecated Features}. @table @code @item For scope If a variable is declared at for scope, it used to remain in scope until the end of the scope which contained the for statement (rather than just within the for scope). G++ retains this, but issues a warning, if such a variable is accessed outside the for scope. @item Implicit C language Old C system header files did not contain an @code{extern "C" @{@dots{}@}} scope to set the language. On such systems, all header files are implicitly scoped inside a C language scope. Also, an empty prototype @code{()} will be treated as an unspecified number of arguments, rather than no arguments, as C++ demands. @end table Index: head/contrib/gcclibs/libcpp/expr.c =================================================================== --- head/contrib/gcclibs/libcpp/expr.c (revision 255106) +++ head/contrib/gcclibs/libcpp/expr.c (revision 255107) @@ -1,1556 +1,1596 @@ /* Parse C expressions for cpplib. Copyright (C) 1987, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2004 Free Software Foundation. Contributed by Per Bothner, 1994. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include "config.h" #include "system.h" #include "cpplib.h" #include "internal.h" #define PART_PRECISION (sizeof (cpp_num_part) * CHAR_BIT) #define HALF_MASK (~(cpp_num_part) 0 >> (PART_PRECISION / 2)) #define LOW_PART(num_part) (num_part & HALF_MASK) #define HIGH_PART(num_part) (num_part >> (PART_PRECISION / 2)) struct op { const cpp_token *token; /* The token forming op (for diagnostics). */ cpp_num value; /* The value logically "right" of op. */ enum cpp_ttype op; }; /* Some simple utility routines on double integers. */ #define num_zerop(num) ((num.low | num.high) == 0) #define num_eq(num1, num2) (num1.low == num2.low && num1.high == num2.high) static bool num_positive (cpp_num, size_t); static bool num_greater_eq (cpp_num, cpp_num, size_t); static cpp_num num_trim (cpp_num, size_t); static cpp_num num_part_mul (cpp_num_part, cpp_num_part); static cpp_num num_unary_op (cpp_reader *, cpp_num, enum cpp_ttype); static cpp_num num_binary_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype); static cpp_num num_negate (cpp_num, size_t); static cpp_num num_bitwise_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype); static cpp_num num_inequality_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype); static cpp_num num_equality_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype); static cpp_num num_mul (cpp_reader *, cpp_num, cpp_num); static cpp_num num_div_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype); static cpp_num num_lshift (cpp_num, size_t, size_t); static cpp_num num_rshift (cpp_num, size_t, size_t); static cpp_num append_digit (cpp_num, int, int, size_t); static cpp_num parse_defined (cpp_reader *); static cpp_num eval_token (cpp_reader *, const cpp_token *); static struct op *reduce (cpp_reader *, struct op *, enum cpp_ttype); static unsigned int interpret_float_suffix (const uchar *, size_t); static unsigned int interpret_int_suffix (const uchar *, size_t); static void check_promotion (cpp_reader *, const struct op *); /* Token type abuse to create unary plus and minus operators. */ #define CPP_UPLUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 1)) #define CPP_UMINUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 2)) /* With -O2, gcc appears to produce nice code, moving the error message load and subsequent jump completely out of the main path. */ #define SYNTAX_ERROR(msgid) \ do { cpp_error (pfile, CPP_DL_ERROR, msgid); goto syntax_error; } while(0) #define SYNTAX_ERROR2(msgid, arg) \ do { cpp_error (pfile, CPP_DL_ERROR, msgid, arg); goto syntax_error; } \ while(0) /* Subroutine of cpp_classify_number. S points to a float suffix of length LEN, possibly zero. Returns 0 for an invalid suffix, or a flag vector describing the suffix. */ static unsigned int interpret_float_suffix (const uchar *s, size_t len) { size_t f = 0, l = 0, i = 0, d = 0, d0 = 0; while (len--) switch (s[len]) { case 'f': case 'F': f++; break; case 'l': case 'L': l++; break; case 'i': case 'I': case 'j': case 'J': i++; break; case 'd': case 'D': /* Disallow fd, ld suffixes. */ if (d && (f || l)) return 0; d++; break; default: return 0; } if (d == 1 && !f && !l) { d = 0; d0 = 1; } if (f + d0 + l > 1 || i > 1) return 0; /* Allow dd, df, dl suffixes for decimal float constants. */ if (d && ((d + f + l != 2) || i)) return 0; return ((i ? CPP_N_IMAGINARY : 0) | (f ? CPP_N_SMALL : d0 ? CPP_N_MEDIUM : l ? CPP_N_LARGE : CPP_N_DEFAULT) | (d ? CPP_N_DFLOAT : 0)); } /* Subroutine of cpp_classify_number. S points to an integer suffix of length LEN, possibly zero. Returns 0 for an invalid suffix, or a flag vector describing the suffix. */ static unsigned int interpret_int_suffix (const uchar *s, size_t len) { size_t u, l, i; u = l = i = 0; while (len--) switch (s[len]) { case 'u': case 'U': u++; break; case 'i': case 'I': case 'j': case 'J': i++; break; case 'l': case 'L': l++; /* If there are two Ls, they must be adjacent and the same case. */ if (l == 2 && s[len] != s[len + 1]) return 0; break; default: return 0; } if (l > 2 || u > 1 || i > 1) return 0; return ((i ? CPP_N_IMAGINARY : 0) | (u ? CPP_N_UNSIGNED : 0) | ((l == 0) ? CPP_N_SMALL : (l == 1) ? CPP_N_MEDIUM : CPP_N_LARGE)); } /* Categorize numeric constants according to their field (integer, floating point, or invalid), radix (decimal, octal, hexadecimal), and type suffixes. */ unsigned int cpp_classify_number (cpp_reader *pfile, const cpp_token *token) { const uchar *str = token->val.str.text; const uchar *limit; unsigned int max_digit, result, radix; enum {NOT_FLOAT = 0, AFTER_POINT, AFTER_EXPON} float_flag; /* If the lexer has done its job, length one can only be a single digit. Fast-path this very common case. */ if (token->val.str.len == 1) return CPP_N_INTEGER | CPP_N_SMALL | CPP_N_DECIMAL; limit = str + token->val.str.len; float_flag = NOT_FLOAT; max_digit = 0; radix = 10; /* First, interpret the radix. */ if (*str == '0') { radix = 8; str++; /* Require at least one hex digit to classify it as hex. */ if ((*str == 'x' || *str == 'X') && (str[1] == '.' || ISXDIGIT (str[1]))) { radix = 16; str++; } + else if ((*str == 'b' || *str == 'B') && (str[1] == '0' || str[1] == '1')) + { + radix = 2; + str++; + } } /* Now scan for a well-formed integer or float. */ for (;;) { unsigned int c = *str++; if (ISDIGIT (c) || (ISXDIGIT (c) && radix == 16)) { c = hex_value (c); if (c > max_digit) max_digit = c; } else if (c == '.') { if (float_flag == NOT_FLOAT) float_flag = AFTER_POINT; else SYNTAX_ERROR ("too many decimal points in number"); } else if ((radix <= 10 && (c == 'e' || c == 'E')) || (radix == 16 && (c == 'p' || c == 'P'))) { float_flag = AFTER_EXPON; break; } else { /* Start of suffix. */ str--; break; } } if (float_flag != NOT_FLOAT && radix == 8) radix = 10; if (max_digit >= radix) - SYNTAX_ERROR2 ("invalid digit \"%c\" in octal constant", '0' + max_digit); + { + if (radix == 2) + SYNTAX_ERROR2 ("invalid digit \"%c\" in binary constant", '0' + max_digit); + else + SYNTAX_ERROR2 ("invalid digit \"%c\" in octal constant", '0' + max_digit); + } if (float_flag != NOT_FLOAT) { + if (radix == 2) + { + cpp_error (pfile, CPP_DL_ERROR, + "invalid prefix \"0b\" for floating constant"); + return CPP_N_INVALID; + } + if (radix == 16 && CPP_PEDANTIC (pfile) && !CPP_OPTION (pfile, c99)) cpp_error (pfile, CPP_DL_PEDWARN, "use of C99 hexadecimal floating constant"); if (float_flag == AFTER_EXPON) { if (*str == '+' || *str == '-') str++; /* Exponent is decimal, even if string is a hex float. */ if (!ISDIGIT (*str)) SYNTAX_ERROR ("exponent has no digits"); do str++; while (ISDIGIT (*str)); } else if (radix == 16) SYNTAX_ERROR ("hexadecimal floating constants require an exponent"); result = interpret_float_suffix (str, limit - str); if (result == 0) { cpp_error (pfile, CPP_DL_ERROR, "invalid suffix \"%.*s\" on floating constant", (int) (limit - str), str); return CPP_N_INVALID; } /* Traditional C didn't accept any floating suffixes. */ if (limit != str && CPP_WTRADITIONAL (pfile) && ! cpp_sys_macro_p (pfile)) cpp_error (pfile, CPP_DL_WARNING, "traditional C rejects the \"%.*s\" suffix", (int) (limit - str), str); /* A suffix for double is a GCC extension via decimal float support. If the suffix also specifies an imaginary value we'll catch that later. */ if ((result == CPP_N_MEDIUM) && CPP_PEDANTIC (pfile)) cpp_error (pfile, CPP_DL_PEDWARN, "suffix for double constant is a GCC extension"); /* Radix must be 10 for decimal floats. */ if ((result & CPP_N_DFLOAT) && radix != 10) { cpp_error (pfile, CPP_DL_ERROR, "invalid suffix \"%.*s\" with hexadecimal floating constant", (int) (limit - str), str); return CPP_N_INVALID; } result |= CPP_N_FLOATING; } else { result = interpret_int_suffix (str, limit - str); if (result == 0) { cpp_error (pfile, CPP_DL_ERROR, "invalid suffix \"%.*s\" on integer constant", (int) (limit - str), str); return CPP_N_INVALID; } /* Traditional C only accepted the 'L' suffix. Suppress warning about 'LL' with -Wno-long-long. */ if (CPP_WTRADITIONAL (pfile) && ! cpp_sys_macro_p (pfile)) { int u_or_i = (result & (CPP_N_UNSIGNED|CPP_N_IMAGINARY)); int large = (result & CPP_N_WIDTH) == CPP_N_LARGE; if (u_or_i || (large && CPP_OPTION (pfile, warn_long_long))) cpp_error (pfile, CPP_DL_WARNING, "traditional C rejects the \"%.*s\" suffix", (int) (limit - str), str); } if ((result & CPP_N_WIDTH) == CPP_N_LARGE && ! CPP_OPTION (pfile, c99) && CPP_OPTION (pfile, warn_long_long)) cpp_error (pfile, CPP_DL_PEDWARN, "use of C99 long long integer constant"); result |= CPP_N_INTEGER; } if ((result & CPP_N_IMAGINARY) && CPP_PEDANTIC (pfile)) cpp_error (pfile, CPP_DL_PEDWARN, "imaginary constants are a GCC extension"); + if (radix == 2 && CPP_PEDANTIC (pfile)) + cpp_error (pfile, CPP_DL_PEDWARN, + "binary constants are a GCC extension"); if (radix == 10) result |= CPP_N_DECIMAL; else if (radix == 16) result |= CPP_N_HEX; + else if (radix == 2) + result |= CPP_N_BINARY; else result |= CPP_N_OCTAL; return result; syntax_error: return CPP_N_INVALID; } /* cpp_interpret_integer converts an integer constant into a cpp_num, of precision options->precision. We do not provide any interface for decimal->float conversion, because the preprocessor doesn't need it and we don't want to drag in GCC's floating point emulator. */ cpp_num cpp_interpret_integer (cpp_reader *pfile, const cpp_token *token, unsigned int type) { const uchar *p, *end; cpp_num result; result.low = 0; result.high = 0; result.unsignedp = !!(type & CPP_N_UNSIGNED); result.overflow = false; p = token->val.str.text; end = p + token->val.str.len; /* Common case of a single digit. */ if (token->val.str.len == 1) result.low = p[0] - '0'; else { cpp_num_part max; size_t precision = CPP_OPTION (pfile, precision); unsigned int base = 10, c = 0; bool overflow = false; if ((type & CPP_N_RADIX) == CPP_N_OCTAL) { base = 8; p++; } else if ((type & CPP_N_RADIX) == CPP_N_HEX) { base = 16; p += 2; } + else if ((type & CPP_N_RADIX) == CPP_N_BINARY) + { + base = 2; + p += 2; + } /* We can add a digit to numbers strictly less than this without needing the precision and slowness of double integers. */ max = ~(cpp_num_part) 0; if (precision < PART_PRECISION) max >>= PART_PRECISION - precision; max = (max - base + 1) / base + 1; for (; p < end; p++) { c = *p; if (ISDIGIT (c) || (base == 16 && ISXDIGIT (c))) c = hex_value (c); else break; /* Strict inequality for when max is set to zero. */ if (result.low < max) result.low = result.low * base + c; else { result = append_digit (result, c, base, precision); overflow |= result.overflow; max = 0; } } if (overflow) cpp_error (pfile, CPP_DL_PEDWARN, "integer constant is too large for its type"); /* If too big to be signed, consider it unsigned. Only warn for decimal numbers. Traditional numbers were always signed (but we still honor an explicit U suffix); but we only have traditional semantics in directives. */ else if (!result.unsignedp && !(CPP_OPTION (pfile, traditional) && pfile->state.in_directive) && !num_positive (result, precision)) { if (base == 10) cpp_error (pfile, CPP_DL_WARNING, "integer constant is so large that it is unsigned"); result.unsignedp = true; } } return result; } /* Append DIGIT to NUM, a number of PRECISION bits being read in base BASE. */ static cpp_num append_digit (cpp_num num, int digit, int base, size_t precision) { cpp_num result; - unsigned int shift = 3 + (base == 16); + unsigned int shift; bool overflow; cpp_num_part add_high, add_low; - /* Multiply by 8 or 16. Catching this overflow here means we don't + /* Multiply by 2, 8 or 16. Catching this overflow here means we don't need to worry about add_high overflowing. */ + switch (base) + { + case 2: + shift = 1; + break; + + case 16: + shift = 4; + break; + + default: + shift = 3; + } overflow = !!(num.high >> (PART_PRECISION - shift)); result.high = num.high << shift; result.low = num.low << shift; result.high |= num.low >> (PART_PRECISION - shift); result.unsignedp = num.unsignedp; if (base == 10) { add_low = num.low << 1; add_high = (num.high << 1) + (num.low >> (PART_PRECISION - 1)); } else add_high = add_low = 0; if (add_low + digit < add_low) add_high++; add_low += digit; if (result.low + add_low < result.low) add_high++; if (result.high + add_high < result.high) overflow = true; result.low += add_low; result.high += add_high; result.overflow = overflow; /* The above code catches overflow of a cpp_num type. This catches overflow of the (possibly shorter) target precision. */ num.low = result.low; num.high = result.high; result = num_trim (result, precision); if (!num_eq (result, num)) result.overflow = true; return result; } /* Handle meeting "defined" in a preprocessor expression. */ static cpp_num parse_defined (cpp_reader *pfile) { cpp_num result; int paren = 0; cpp_hashnode *node = 0; const cpp_token *token; cpp_context *initial_context = pfile->context; /* Don't expand macros. */ pfile->state.prevent_expansion++; token = cpp_get_token (pfile); if (token->type == CPP_OPEN_PAREN) { paren = 1; token = cpp_get_token (pfile); } if (token->type == CPP_NAME) { node = token->val.node; if (paren && cpp_get_token (pfile)->type != CPP_CLOSE_PAREN) { cpp_error (pfile, CPP_DL_ERROR, "missing ')' after \"defined\""); node = 0; } } else { cpp_error (pfile, CPP_DL_ERROR, "operator \"defined\" requires an identifier"); if (token->flags & NAMED_OP) { cpp_token op; op.flags = 0; op.type = token->type; cpp_error (pfile, CPP_DL_ERROR, "(\"%s\" is an alternative token for \"%s\" in C++)", cpp_token_as_text (pfile, token), cpp_token_as_text (pfile, &op)); } } if (node) { if (pfile->context != initial_context && CPP_PEDANTIC (pfile)) cpp_error (pfile, CPP_DL_WARNING, "this use of \"defined\" may not be portable"); _cpp_mark_macro_used (node); /* A possible controlling macro of the form #if !defined (). _cpp_parse_expr checks there was no other junk on the line. */ pfile->mi_ind_cmacro = node; } pfile->state.prevent_expansion--; result.unsignedp = false; result.high = 0; result.overflow = false; result.low = node && node->type == NT_MACRO; return result; } /* Convert a token into a CPP_NUMBER (an interpreted preprocessing number or character constant, or the result of the "defined" or "#" operators). */ static cpp_num eval_token (cpp_reader *pfile, const cpp_token *token) { cpp_num result; unsigned int temp; int unsignedp = 0; result.unsignedp = false; result.overflow = false; switch (token->type) { case CPP_NUMBER: temp = cpp_classify_number (pfile, token); switch (temp & CPP_N_CATEGORY) { case CPP_N_FLOATING: cpp_error (pfile, CPP_DL_ERROR, "floating constant in preprocessor expression"); break; case CPP_N_INTEGER: if (!(temp & CPP_N_IMAGINARY)) return cpp_interpret_integer (pfile, token, temp); cpp_error (pfile, CPP_DL_ERROR, "imaginary number in preprocessor expression"); break; case CPP_N_INVALID: /* Error already issued. */ break; } result.high = result.low = 0; break; case CPP_WCHAR: case CPP_CHAR: { cppchar_t cc = cpp_interpret_charconst (pfile, token, &temp, &unsignedp); result.high = 0; result.low = cc; /* Sign-extend the result if necessary. */ if (!unsignedp && (cppchar_signed_t) cc < 0) { if (PART_PRECISION > BITS_PER_CPPCHAR_T) result.low |= ~(~(cpp_num_part) 0 >> (PART_PRECISION - BITS_PER_CPPCHAR_T)); result.high = ~(cpp_num_part) 0; result = num_trim (result, CPP_OPTION (pfile, precision)); } } break; case CPP_NAME: if (token->val.node == pfile->spec_nodes.n_defined) return parse_defined (pfile); else if (CPP_OPTION (pfile, cplusplus) && (token->val.node == pfile->spec_nodes.n_true || token->val.node == pfile->spec_nodes.n_false)) { result.high = 0; result.low = (token->val.node == pfile->spec_nodes.n_true); } else { result.high = 0; result.low = 0; if (CPP_OPTION (pfile, warn_undef) && !pfile->state.skip_eval) cpp_error (pfile, CPP_DL_WARNING, "\"%s\" is not defined", NODE_NAME (token->val.node)); } break; default: /* CPP_HASH */ _cpp_test_assertion (pfile, &temp); result.high = 0; result.low = temp; } result.unsignedp = !!unsignedp; return result; } /* Operator precedence and flags table. After an operator is returned from the lexer, if it has priority less than the operator on the top of the stack, we reduce the stack by one operator and repeat the test. Since equal priorities do not reduce, this is naturally right-associative. We handle left-associative operators by decrementing the priority of just-lexed operators by one, but retaining the priority of operators already on the stack. The remaining cases are '(' and ')'. We handle '(' by skipping the reduction phase completely. ')' is given lower priority than everything else, including '(', effectively forcing a reduction of the parenthesized expression. If there is a matching '(', the routine reduce() exits immediately. If the normal exit route sees a ')', then there cannot have been a matching '(' and an error message is output. The parser assumes all shifted operators require a left operand unless the flag NO_L_OPERAND is set. These semantics are automatic; any extra semantics need to be handled with operator-specific code. */ /* Flags. If CHECK_PROMOTION, we warn if the effective sign of an operand changes because of integer promotions. */ #define NO_L_OPERAND (1 << 0) #define LEFT_ASSOC (1 << 1) #define CHECK_PROMOTION (1 << 2) /* Operator to priority map. Must be in the same order as the first N entries of enum cpp_ttype. */ static const struct cpp_operator { uchar prio; uchar flags; } optab[] = { /* EQ */ {0, 0}, /* Shouldn't happen. */ /* NOT */ {16, NO_L_OPERAND}, /* GREATER */ {12, LEFT_ASSOC | CHECK_PROMOTION}, /* LESS */ {12, LEFT_ASSOC | CHECK_PROMOTION}, /* PLUS */ {14, LEFT_ASSOC | CHECK_PROMOTION}, /* MINUS */ {14, LEFT_ASSOC | CHECK_PROMOTION}, /* MULT */ {15, LEFT_ASSOC | CHECK_PROMOTION}, /* DIV */ {15, LEFT_ASSOC | CHECK_PROMOTION}, /* MOD */ {15, LEFT_ASSOC | CHECK_PROMOTION}, /* AND */ {9, LEFT_ASSOC | CHECK_PROMOTION}, /* OR */ {7, LEFT_ASSOC | CHECK_PROMOTION}, /* XOR */ {8, LEFT_ASSOC | CHECK_PROMOTION}, /* RSHIFT */ {13, LEFT_ASSOC}, /* LSHIFT */ {13, LEFT_ASSOC}, /* COMPL */ {16, NO_L_OPERAND}, /* AND_AND */ {6, LEFT_ASSOC}, /* OR_OR */ {5, LEFT_ASSOC}, /* QUERY */ {3, 0}, /* COLON */ {4, LEFT_ASSOC | CHECK_PROMOTION}, /* COMMA */ {2, LEFT_ASSOC}, /* OPEN_PAREN */ {1, NO_L_OPERAND}, /* CLOSE_PAREN */ {0, 0}, /* EOF */ {0, 0}, /* EQ_EQ */ {11, LEFT_ASSOC}, /* NOT_EQ */ {11, LEFT_ASSOC}, /* GREATER_EQ */ {12, LEFT_ASSOC | CHECK_PROMOTION}, /* LESS_EQ */ {12, LEFT_ASSOC | CHECK_PROMOTION}, /* UPLUS */ {16, NO_L_OPERAND}, /* UMINUS */ {16, NO_L_OPERAND} }; /* Parse and evaluate a C expression, reading from PFILE. Returns the truth value of the expression. The implementation is an operator precedence parser, i.e. a bottom-up parser, using a stack for not-yet-reduced tokens. The stack base is op_stack, and the current stack pointer is 'top'. There is a stack element for each operator (only), and the most recently pushed operator is 'top->op'. An operand (value) is stored in the 'value' field of the stack element of the operator that precedes it. */ bool _cpp_parse_expr (cpp_reader *pfile) { struct op *top = pfile->op_stack; unsigned int lex_count; bool saw_leading_not, want_value = true; pfile->state.skip_eval = 0; /* Set up detection of #if ! defined(). */ pfile->mi_ind_cmacro = 0; saw_leading_not = false; lex_count = 0; /* Lowest priority operator prevents further reductions. */ top->op = CPP_EOF; for (;;) { struct op op; lex_count++; op.token = cpp_get_token (pfile); op.op = op.token->type; switch (op.op) { /* These tokens convert into values. */ case CPP_NUMBER: case CPP_CHAR: case CPP_WCHAR: case CPP_NAME: case CPP_HASH: if (!want_value) SYNTAX_ERROR2 ("missing binary operator before token \"%s\"", cpp_token_as_text (pfile, op.token)); want_value = false; top->value = eval_token (pfile, op.token); continue; case CPP_NOT: saw_leading_not = lex_count == 1; break; case CPP_PLUS: if (want_value) op.op = CPP_UPLUS; break; case CPP_MINUS: if (want_value) op.op = CPP_UMINUS; break; default: if ((int) op.op <= (int) CPP_EQ || (int) op.op >= (int) CPP_PLUS_EQ) SYNTAX_ERROR2 ("token \"%s\" is not valid in preprocessor expressions", cpp_token_as_text (pfile, op.token)); break; } /* Check we have a value or operator as appropriate. */ if (optab[op.op].flags & NO_L_OPERAND) { if (!want_value) SYNTAX_ERROR2 ("missing binary operator before token \"%s\"", cpp_token_as_text (pfile, op.token)); } else if (want_value) { /* We want a number (or expression) and haven't got one. Try to emit a specific diagnostic. */ if (op.op == CPP_CLOSE_PAREN && top->op == CPP_OPEN_PAREN) SYNTAX_ERROR ("missing expression between '(' and ')'"); if (op.op == CPP_EOF && top->op == CPP_EOF) SYNTAX_ERROR ("#if with no expression"); if (top->op != CPP_EOF && top->op != CPP_OPEN_PAREN) SYNTAX_ERROR2 ("operator '%s' has no right operand", cpp_token_as_text (pfile, top->token)); else if (op.op == CPP_CLOSE_PAREN || op.op == CPP_EOF) /* Complain about missing paren during reduction. */; else SYNTAX_ERROR2 ("operator '%s' has no left operand", cpp_token_as_text (pfile, op.token)); } top = reduce (pfile, top, op.op); if (!top) goto syntax_error; if (op.op == CPP_EOF) break; switch (op.op) { case CPP_CLOSE_PAREN: continue; case CPP_OR_OR: if (!num_zerop (top->value)) pfile->state.skip_eval++; break; case CPP_AND_AND: case CPP_QUERY: if (num_zerop (top->value)) pfile->state.skip_eval++; break; case CPP_COLON: if (top->op != CPP_QUERY) SYNTAX_ERROR (" ':' without preceding '?'"); if (!num_zerop (top[-1].value)) /* Was '?' condition true? */ pfile->state.skip_eval++; else pfile->state.skip_eval--; default: break; } want_value = true; /* Check for and handle stack overflow. */ if (++top == pfile->op_limit) top = _cpp_expand_op_stack (pfile); top->op = op.op; top->token = op.token; } /* The controlling macro expression is only valid if we called lex 3 times: and . push_conditional () checks that we are at top-of-file. */ if (pfile->mi_ind_cmacro && !(saw_leading_not && lex_count == 3)) pfile->mi_ind_cmacro = 0; if (top != pfile->op_stack) { cpp_error (pfile, CPP_DL_ICE, "unbalanced stack in #if"); syntax_error: return false; /* Return false on syntax error. */ } return !num_zerop (top->value); } /* Reduce the operator / value stack if possible, in preparation for pushing operator OP. Returns NULL on error, otherwise the top of the stack. */ static struct op * reduce (cpp_reader *pfile, struct op *top, enum cpp_ttype op) { unsigned int prio; if (top->op <= CPP_EQ || top->op > CPP_LAST_CPP_OP + 2) { bad_op: cpp_error (pfile, CPP_DL_ICE, "impossible operator '%u'", top->op); return 0; } if (op == CPP_OPEN_PAREN) return top; /* Decrement the priority of left-associative operators to force a reduction with operators of otherwise equal priority. */ prio = optab[op].prio - ((optab[op].flags & LEFT_ASSOC) != 0); while (prio < optab[top->op].prio) { if (CPP_OPTION (pfile, warn_num_sign_change) && optab[top->op].flags & CHECK_PROMOTION) check_promotion (pfile, top); switch (top->op) { case CPP_UPLUS: case CPP_UMINUS: case CPP_NOT: case CPP_COMPL: top[-1].value = num_unary_op (pfile, top->value, top->op); break; case CPP_PLUS: case CPP_MINUS: case CPP_RSHIFT: case CPP_LSHIFT: case CPP_COMMA: top[-1].value = num_binary_op (pfile, top[-1].value, top->value, top->op); break; case CPP_GREATER: case CPP_LESS: case CPP_GREATER_EQ: case CPP_LESS_EQ: top[-1].value = num_inequality_op (pfile, top[-1].value, top->value, top->op); break; case CPP_EQ_EQ: case CPP_NOT_EQ: top[-1].value = num_equality_op (pfile, top[-1].value, top->value, top->op); break; case CPP_AND: case CPP_OR: case CPP_XOR: top[-1].value = num_bitwise_op (pfile, top[-1].value, top->value, top->op); break; case CPP_MULT: top[-1].value = num_mul (pfile, top[-1].value, top->value); break; case CPP_DIV: case CPP_MOD: top[-1].value = num_div_op (pfile, top[-1].value, top->value, top->op); break; case CPP_OR_OR: top--; if (!num_zerop (top->value)) pfile->state.skip_eval--; top->value.low = (!num_zerop (top->value) || !num_zerop (top[1].value)); top->value.high = 0; top->value.unsignedp = false; top->value.overflow = false; continue; case CPP_AND_AND: top--; if (num_zerop (top->value)) pfile->state.skip_eval--; top->value.low = (!num_zerop (top->value) && !num_zerop (top[1].value)); top->value.high = 0; top->value.unsignedp = false; top->value.overflow = false; continue; case CPP_OPEN_PAREN: if (op != CPP_CLOSE_PAREN) { cpp_error (pfile, CPP_DL_ERROR, "missing ')' in expression"); return 0; } top--; top->value = top[1].value; return top; case CPP_COLON: top -= 2; if (!num_zerop (top->value)) { pfile->state.skip_eval--; top->value = top[1].value; } else top->value = top[2].value; top->value.unsignedp = (top[1].value.unsignedp || top[2].value.unsignedp); continue; case CPP_QUERY: cpp_error (pfile, CPP_DL_ERROR, "'?' without following ':'"); return 0; default: goto bad_op; } top--; if (top->value.overflow && !pfile->state.skip_eval) cpp_error (pfile, CPP_DL_PEDWARN, "integer overflow in preprocessor expression"); } if (op == CPP_CLOSE_PAREN) { cpp_error (pfile, CPP_DL_ERROR, "missing '(' in expression"); return 0; } return top; } /* Returns the position of the old top of stack after expansion. */ struct op * _cpp_expand_op_stack (cpp_reader *pfile) { size_t old_size = (size_t) (pfile->op_limit - pfile->op_stack); size_t new_size = old_size * 2 + 20; pfile->op_stack = XRESIZEVEC (struct op, pfile->op_stack, new_size); pfile->op_limit = pfile->op_stack + new_size; return pfile->op_stack + old_size; } /* Emits a warning if the effective sign of either operand of OP changes because of integer promotions. */ static void check_promotion (cpp_reader *pfile, const struct op *op) { if (op->value.unsignedp == op[-1].value.unsignedp) return; if (op->value.unsignedp) { if (!num_positive (op[-1].value, CPP_OPTION (pfile, precision))) cpp_error (pfile, CPP_DL_WARNING, "the left operand of \"%s\" changes sign when promoted", cpp_token_as_text (pfile, op->token)); } else if (!num_positive (op->value, CPP_OPTION (pfile, precision))) cpp_error (pfile, CPP_DL_WARNING, "the right operand of \"%s\" changes sign when promoted", cpp_token_as_text (pfile, op->token)); } /* Clears the unused high order bits of the number pointed to by PNUM. */ static cpp_num num_trim (cpp_num num, size_t precision) { if (precision > PART_PRECISION) { precision -= PART_PRECISION; if (precision < PART_PRECISION) num.high &= ((cpp_num_part) 1 << precision) - 1; } else { if (precision < PART_PRECISION) num.low &= ((cpp_num_part) 1 << precision) - 1; num.high = 0; } return num; } /* True iff A (presumed signed) >= 0. */ static bool num_positive (cpp_num num, size_t precision) { if (precision > PART_PRECISION) { precision -= PART_PRECISION; return (num.high & (cpp_num_part) 1 << (precision - 1)) == 0; } return (num.low & (cpp_num_part) 1 << (precision - 1)) == 0; } /* Sign extend a number, with PRECISION significant bits and all others assumed clear, to fill out a cpp_num structure. */ cpp_num cpp_num_sign_extend (cpp_num num, size_t precision) { if (!num.unsignedp) { if (precision > PART_PRECISION) { precision -= PART_PRECISION; if (precision < PART_PRECISION && (num.high & (cpp_num_part) 1 << (precision - 1))) num.high |= ~(~(cpp_num_part) 0 >> (PART_PRECISION - precision)); } else if (num.low & (cpp_num_part) 1 << (precision - 1)) { if (precision < PART_PRECISION) num.low |= ~(~(cpp_num_part) 0 >> (PART_PRECISION - precision)); num.high = ~(cpp_num_part) 0; } } return num; } /* Returns the negative of NUM. */ static cpp_num num_negate (cpp_num num, size_t precision) { cpp_num copy; copy = num; num.high = ~num.high; num.low = ~num.low; if (++num.low == 0) num.high++; num = num_trim (num, precision); num.overflow = (!num.unsignedp && num_eq (num, copy) && !num_zerop (num)); return num; } /* Returns true if A >= B. */ static bool num_greater_eq (cpp_num pa, cpp_num pb, size_t precision) { bool unsignedp; unsignedp = pa.unsignedp || pb.unsignedp; if (!unsignedp) { /* Both numbers have signed type. If they are of different sign, the answer is the sign of A. */ unsignedp = num_positive (pa, precision); if (unsignedp != num_positive (pb, precision)) return unsignedp; /* Otherwise we can do an unsigned comparison. */ } return (pa.high > pb.high) || (pa.high == pb.high && pa.low >= pb.low); } /* Returns LHS OP RHS, where OP is a bit-wise operation. */ static cpp_num num_bitwise_op (cpp_reader *pfile ATTRIBUTE_UNUSED, cpp_num lhs, cpp_num rhs, enum cpp_ttype op) { lhs.overflow = false; lhs.unsignedp = lhs.unsignedp || rhs.unsignedp; /* As excess precision is zeroed, there is no need to num_trim () as these operations cannot introduce a set bit there. */ if (op == CPP_AND) { lhs.low &= rhs.low; lhs.high &= rhs.high; } else if (op == CPP_OR) { lhs.low |= rhs.low; lhs.high |= rhs.high; } else { lhs.low ^= rhs.low; lhs.high ^= rhs.high; } return lhs; } /* Returns LHS OP RHS, where OP is an inequality. */ static cpp_num num_inequality_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs, enum cpp_ttype op) { bool gte = num_greater_eq (lhs, rhs, CPP_OPTION (pfile, precision)); if (op == CPP_GREATER_EQ) lhs.low = gte; else if (op == CPP_LESS) lhs.low = !gte; else if (op == CPP_GREATER) lhs.low = gte && !num_eq (lhs, rhs); else /* CPP_LESS_EQ. */ lhs.low = !gte || num_eq (lhs, rhs); lhs.high = 0; lhs.overflow = false; lhs.unsignedp = false; return lhs; } /* Returns LHS OP RHS, where OP is == or !=. */ static cpp_num num_equality_op (cpp_reader *pfile ATTRIBUTE_UNUSED, cpp_num lhs, cpp_num rhs, enum cpp_ttype op) { /* Work around a 3.0.4 bug; see PR 6950. */ bool eq = num_eq (lhs, rhs); if (op == CPP_NOT_EQ) eq = !eq; lhs.low = eq; lhs.high = 0; lhs.overflow = false; lhs.unsignedp = false; return lhs; } /* Shift NUM, of width PRECISION, right by N bits. */ static cpp_num num_rshift (cpp_num num, size_t precision, size_t n) { cpp_num_part sign_mask; bool x = num_positive (num, precision); if (num.unsignedp || x) sign_mask = 0; else sign_mask = ~(cpp_num_part) 0; if (n >= precision) num.high = num.low = sign_mask; else { /* Sign-extend. */ if (precision < PART_PRECISION) num.high = sign_mask, num.low |= sign_mask << precision; else if (precision < 2 * PART_PRECISION) num.high |= sign_mask << (precision - PART_PRECISION); if (n >= PART_PRECISION) { n -= PART_PRECISION; num.low = num.high; num.high = sign_mask; } if (n) { num.low = (num.low >> n) | (num.high << (PART_PRECISION - n)); num.high = (num.high >> n) | (sign_mask << (PART_PRECISION - n)); } } num = num_trim (num, precision); num.overflow = false; return num; } /* Shift NUM, of width PRECISION, left by N bits. */ static cpp_num num_lshift (cpp_num num, size_t precision, size_t n) { if (n >= precision) { num.overflow = !num.unsignedp && !num_zerop (num); num.high = num.low = 0; } else { cpp_num orig, maybe_orig; size_t m = n; orig = num; if (m >= PART_PRECISION) { m -= PART_PRECISION; num.high = num.low; num.low = 0; } if (m) { num.high = (num.high << m) | (num.low >> (PART_PRECISION - m)); num.low <<= m; } num = num_trim (num, precision); if (num.unsignedp) num.overflow = false; else { maybe_orig = num_rshift (num, precision, n); num.overflow = !num_eq (orig, maybe_orig); } } return num; } /* The four unary operators: +, -, ! and ~. */ static cpp_num num_unary_op (cpp_reader *pfile, cpp_num num, enum cpp_ttype op) { switch (op) { case CPP_UPLUS: if (CPP_WTRADITIONAL (pfile) && !pfile->state.skip_eval) cpp_error (pfile, CPP_DL_WARNING, "traditional C rejects the unary plus operator"); num.overflow = false; break; case CPP_UMINUS: num = num_negate (num, CPP_OPTION (pfile, precision)); break; case CPP_COMPL: num.high = ~num.high; num.low = ~num.low; num = num_trim (num, CPP_OPTION (pfile, precision)); num.overflow = false; break; default: /* case CPP_NOT: */ num.low = num_zerop (num); num.high = 0; num.overflow = false; num.unsignedp = false; break; } return num; } /* The various binary operators. */ static cpp_num num_binary_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs, enum cpp_ttype op) { cpp_num result; size_t precision = CPP_OPTION (pfile, precision); size_t n; switch (op) { /* Shifts. */ case CPP_LSHIFT: case CPP_RSHIFT: if (!rhs.unsignedp && !num_positive (rhs, precision)) { /* A negative shift is a positive shift the other way. */ if (op == CPP_LSHIFT) op = CPP_RSHIFT; else op = CPP_LSHIFT; rhs = num_negate (rhs, precision); } if (rhs.high) n = ~0; /* Maximal. */ else n = rhs.low; if (op == CPP_LSHIFT) lhs = num_lshift (lhs, precision, n); else lhs = num_rshift (lhs, precision, n); break; /* Arithmetic. */ case CPP_MINUS: rhs = num_negate (rhs, precision); case CPP_PLUS: result.low = lhs.low + rhs.low; result.high = lhs.high + rhs.high; if (result.low < lhs.low) result.high++; result.unsignedp = lhs.unsignedp || rhs.unsignedp; result.overflow = false; result = num_trim (result, precision); if (!result.unsignedp) { bool lhsp = num_positive (lhs, precision); result.overflow = (lhsp == num_positive (rhs, precision) && lhsp != num_positive (result, precision)); } return result; /* Comma. */ default: /* case CPP_COMMA: */ if (CPP_PEDANTIC (pfile) && (!CPP_OPTION (pfile, c99) || !pfile->state.skip_eval)) cpp_error (pfile, CPP_DL_PEDWARN, "comma operator in operand of #if"); lhs = rhs; break; } return lhs; } /* Multiplies two unsigned cpp_num_parts to give a cpp_num. This cannot overflow. */ static cpp_num num_part_mul (cpp_num_part lhs, cpp_num_part rhs) { cpp_num result; cpp_num_part middle[2], temp; result.low = LOW_PART (lhs) * LOW_PART (rhs); result.high = HIGH_PART (lhs) * HIGH_PART (rhs); middle[0] = LOW_PART (lhs) * HIGH_PART (rhs); middle[1] = HIGH_PART (lhs) * LOW_PART (rhs); temp = result.low; result.low += LOW_PART (middle[0]) << (PART_PRECISION / 2); if (result.low < temp) result.high++; temp = result.low; result.low += LOW_PART (middle[1]) << (PART_PRECISION / 2); if (result.low < temp) result.high++; result.high += HIGH_PART (middle[0]); result.high += HIGH_PART (middle[1]); result.unsignedp = true; result.overflow = false; return result; } /* Multiply two preprocessing numbers. */ static cpp_num num_mul (cpp_reader *pfile, cpp_num lhs, cpp_num rhs) { cpp_num result, temp; bool unsignedp = lhs.unsignedp || rhs.unsignedp; bool overflow, negate = false; size_t precision = CPP_OPTION (pfile, precision); /* Prepare for unsigned multiplication. */ if (!unsignedp) { if (!num_positive (lhs, precision)) negate = !negate, lhs = num_negate (lhs, precision); if (!num_positive (rhs, precision)) negate = !negate, rhs = num_negate (rhs, precision); } overflow = lhs.high && rhs.high; result = num_part_mul (lhs.low, rhs.low); temp = num_part_mul (lhs.high, rhs.low); result.high += temp.low; if (temp.high) overflow = true; temp = num_part_mul (lhs.low, rhs.high); result.high += temp.low; if (temp.high) overflow = true; temp.low = result.low, temp.high = result.high; result = num_trim (result, precision); if (!num_eq (result, temp)) overflow = true; if (negate) result = num_negate (result, precision); if (unsignedp) result.overflow = false; else result.overflow = overflow || (num_positive (result, precision) ^ !negate && !num_zerop (result)); result.unsignedp = unsignedp; return result; } /* Divide two preprocessing numbers, returning the answer or the remainder depending upon OP. */ static cpp_num num_div_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs, enum cpp_ttype op) { cpp_num result, sub; cpp_num_part mask; bool unsignedp = lhs.unsignedp || rhs.unsignedp; bool negate = false, lhs_neg = false; size_t i, precision = CPP_OPTION (pfile, precision); /* Prepare for unsigned division. */ if (!unsignedp) { if (!num_positive (lhs, precision)) negate = !negate, lhs_neg = true, lhs = num_negate (lhs, precision); if (!num_positive (rhs, precision)) negate = !negate, rhs = num_negate (rhs, precision); } /* Find the high bit. */ if (rhs.high) { i = precision - 1; mask = (cpp_num_part) 1 << (i - PART_PRECISION); for (; ; i--, mask >>= 1) if (rhs.high & mask) break; } else if (rhs.low) { if (precision > PART_PRECISION) i = precision - PART_PRECISION - 1; else i = precision - 1; mask = (cpp_num_part) 1 << i; for (; ; i--, mask >>= 1) if (rhs.low & mask) break; } else { if (!pfile->state.skip_eval) cpp_error (pfile, CPP_DL_ERROR, "division by zero in #if"); return lhs; } /* First nonzero bit of RHS is bit I. Do naive division by shifting the RHS fully left, and subtracting from LHS if LHS is at least as big, and then repeating but with one less shift. This is not very efficient, but is easy to understand. */ rhs.unsignedp = true; lhs.unsignedp = true; i = precision - i - 1; sub = num_lshift (rhs, precision, i); result.high = result.low = 0; for (;;) { if (num_greater_eq (lhs, sub, precision)) { lhs = num_binary_op (pfile, lhs, sub, CPP_MINUS); if (i >= PART_PRECISION) result.high |= (cpp_num_part) 1 << (i - PART_PRECISION); else result.low |= (cpp_num_part) 1 << i; } if (i-- == 0) break; sub.low = (sub.low >> 1) | (sub.high << (PART_PRECISION - 1)); sub.high >>= 1; } /* We divide so that the remainder has the sign of the LHS. */ if (op == CPP_DIV) { result.unsignedp = unsignedp; result.overflow = false; if (!unsignedp) { if (negate) result = num_negate (result, precision); result.overflow = num_positive (result, precision) ^ !negate; } return result; } /* CPP_MOD. */ lhs.unsignedp = unsignedp; lhs.overflow = false; if (lhs_neg) lhs = num_negate (lhs, precision); return lhs; } Index: head/contrib/gcclibs/libcpp/include/cpplib.h =================================================================== --- head/contrib/gcclibs/libcpp/include/cpplib.h (revision 255106) +++ head/contrib/gcclibs/libcpp/include/cpplib.h (revision 255107) @@ -1,855 +1,856 @@ /* Definitions for CPP library. Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. Written by Per Bothner, 1994-95. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. In other words, you are welcome to use, share and improve this program. You are forbidden to forbid anyone else to use, share and improve what you give them. Help stamp out software-hoarding! */ #ifndef LIBCPP_CPPLIB_H #define LIBCPP_CPPLIB_H #include #include "symtab.h" #include "line-map.h" #ifdef __cplusplus extern "C" { #endif typedef struct cpp_reader cpp_reader; typedef struct cpp_buffer cpp_buffer; typedef struct cpp_options cpp_options; typedef struct cpp_token cpp_token; typedef struct cpp_string cpp_string; typedef struct cpp_hashnode cpp_hashnode; typedef struct cpp_macro cpp_macro; typedef struct cpp_callbacks cpp_callbacks; typedef struct cpp_dir cpp_dir; struct answer; struct _cpp_file; /* The first three groups, apart from '=', can appear in preprocessor expressions (+= and -= are used to indicate unary + and - resp.). This allows a lookup table to be implemented in _cpp_parse_expr. The first group, to CPP_LAST_EQ, can be immediately followed by an '='. The lexer needs operators ending in '=', like ">>=", to be in the same order as their counterparts without the '=', like ">>". See the cpp_operator table optab in expr.c if you change the order or add or remove anything in the first group. */ #define TTYPE_TABLE \ OP(EQ, "=") \ OP(NOT, "!") \ OP(GREATER, ">") /* compare */ \ OP(LESS, "<") \ OP(PLUS, "+") /* math */ \ OP(MINUS, "-") \ OP(MULT, "*") \ OP(DIV, "/") \ OP(MOD, "%") \ OP(AND, "&") /* bit ops */ \ OP(OR, "|") \ OP(XOR, "^") \ OP(RSHIFT, ">>") \ OP(LSHIFT, "<<") \ \ OP(COMPL, "~") \ OP(AND_AND, "&&") /* logical */ \ OP(OR_OR, "||") \ OP(QUERY, "?") \ OP(COLON, ":") \ OP(COMMA, ",") /* grouping */ \ OP(OPEN_PAREN, "(") \ OP(CLOSE_PAREN, ")") \ TK(EOF, NONE) \ OP(EQ_EQ, "==") /* compare */ \ OP(NOT_EQ, "!=") \ OP(GREATER_EQ, ">=") \ OP(LESS_EQ, "<=") \ \ /* These two are unary + / - in preprocessor expressions. */ \ OP(PLUS_EQ, "+=") /* math */ \ OP(MINUS_EQ, "-=") \ \ OP(MULT_EQ, "*=") \ OP(DIV_EQ, "/=") \ OP(MOD_EQ, "%=") \ OP(AND_EQ, "&=") /* bit ops */ \ OP(OR_EQ, "|=") \ OP(XOR_EQ, "^=") \ OP(RSHIFT_EQ, ">>=") \ OP(LSHIFT_EQ, "<<=") \ /* Digraphs together, beginning with CPP_FIRST_DIGRAPH. */ \ OP(HASH, "#") /* digraphs */ \ OP(PASTE, "##") \ OP(OPEN_SQUARE, "[") \ OP(CLOSE_SQUARE, "]") \ OP(OPEN_BRACE, "{") \ OP(CLOSE_BRACE, "}") \ /* The remainder of the punctuation. Order is not significant. */ \ OP(SEMICOLON, ";") /* structure */ \ OP(ELLIPSIS, "...") \ OP(PLUS_PLUS, "++") /* increment */ \ OP(MINUS_MINUS, "--") \ OP(DEREF, "->") /* accessors */ \ OP(DOT, ".") \ OP(SCOPE, "::") \ OP(DEREF_STAR, "->*") \ OP(DOT_STAR, ".*") \ OP(ATSIGN, "@") /* used in Objective-C */ \ \ TK(NAME, IDENT) /* word */ \ TK(AT_NAME, IDENT) /* @word - Objective-C */ \ TK(NUMBER, LITERAL) /* 34_be+ta */ \ \ TK(CHAR, LITERAL) /* 'char' */ \ TK(WCHAR, LITERAL) /* L'char' */ \ TK(OTHER, LITERAL) /* stray punctuation */ \ \ TK(STRING, LITERAL) /* "string" */ \ TK(WSTRING, LITERAL) /* L"string" */ \ TK(OBJC_STRING, LITERAL) /* @"string" - Objective-C */ \ TK(HEADER_NAME, LITERAL) /* in #include */ \ \ TK(COMMENT, LITERAL) /* Only if output comments. */ \ /* SPELL_LITERAL happens to DTRT. */ \ TK(MACRO_ARG, NONE) /* Macro argument. */ \ TK(PRAGMA, NONE) /* Only for deferred pragmas. */ \ TK(PRAGMA_EOL, NONE) /* End-of-line for deferred pragmas. */ \ TK(PADDING, NONE) /* Whitespace for -E. */ #define OP(e, s) CPP_ ## e, #define TK(e, s) CPP_ ## e, enum cpp_ttype { TTYPE_TABLE N_TTYPES, /* Positions in the table. */ CPP_LAST_EQ = CPP_LSHIFT, CPP_FIRST_DIGRAPH = CPP_HASH, CPP_LAST_PUNCTUATOR= CPP_ATSIGN, CPP_LAST_CPP_OP = CPP_LESS_EQ }; #undef OP #undef TK /* C language kind, used when calling cpp_create_reader. */ enum c_lang {CLK_GNUC89 = 0, CLK_GNUC99, CLK_STDC89, CLK_STDC94, CLK_STDC99, CLK_GNUCXX, CLK_CXX98, CLK_ASM}; /* Payload of a NUMBER, STRING, CHAR or COMMENT token. */ struct cpp_string GTY(()) { unsigned int len; const unsigned char *text; }; /* Flags for the cpp_token structure. */ #define PREV_WHITE (1 << 0) /* If whitespace before this token. */ #define DIGRAPH (1 << 1) /* If it was a digraph. */ #define STRINGIFY_ARG (1 << 2) /* If macro argument to be stringified. */ #define PASTE_LEFT (1 << 3) /* If on LHS of a ## operator. */ #define NAMED_OP (1 << 4) /* C++ named operators. */ #define NO_EXPAND (1 << 5) /* Do not macro-expand this token. */ #define BOL (1 << 6) /* Token at beginning of line. */ #define PURE_ZERO (1 << 7) /* Single 0 digit, used by the C++ frontend, set in c-lex.c. */ /* Specify which field, if any, of the cpp_token union is used. */ enum cpp_token_fld_kind { CPP_TOKEN_FLD_NODE, CPP_TOKEN_FLD_SOURCE, CPP_TOKEN_FLD_STR, CPP_TOKEN_FLD_ARG_NO, CPP_TOKEN_FLD_PRAGMA, CPP_TOKEN_FLD_NONE }; /* A preprocessing token. This has been carefully packed and should occupy 16 bytes on 32-bit hosts and 24 bytes on 64-bit hosts. */ struct cpp_token GTY(()) { source_location src_loc; /* Location of first char of token. */ ENUM_BITFIELD(cpp_ttype) type : CHAR_BIT; /* token type */ unsigned char flags; /* flags - see above */ union cpp_token_u { /* An identifier. */ cpp_hashnode * GTY ((nested_ptr (union tree_node, "%h ? CPP_HASHNODE (GCC_IDENT_TO_HT_IDENT (%h)) : NULL", "%h ? HT_IDENT_TO_GCC_IDENT (HT_NODE (%h)) : NULL"), tag ("CPP_TOKEN_FLD_NODE"))) node; /* Inherit padding from this token. */ cpp_token * GTY ((tag ("CPP_TOKEN_FLD_SOURCE"))) source; /* A string, or number. */ struct cpp_string GTY ((tag ("CPP_TOKEN_FLD_STR"))) str; /* Argument no. for a CPP_MACRO_ARG. */ unsigned int GTY ((tag ("CPP_TOKEN_FLD_ARG_NO"))) arg_no; /* Caller-supplied identifier for a CPP_PRAGMA. */ unsigned int GTY ((tag ("CPP_TOKEN_FLD_PRAGMA"))) pragma; } GTY ((desc ("cpp_token_val_index (&%1)"))) val; }; /* Say which field is in use. */ extern enum cpp_token_fld_kind cpp_token_val_index (cpp_token *tok); /* A type wide enough to hold any multibyte source character. cpplib's character constant interpreter requires an unsigned type. Also, a typedef for the signed equivalent. The width of this type is capped at 32 bits; there do exist targets where wchar_t is 64 bits, but only in a non-default mode, and there would be no meaningful interpretation for a wchar_t value greater than 2^32 anyway -- the widest wide-character encoding around is ISO 10646, which stops at 2^31. */ #if CHAR_BIT * SIZEOF_INT >= 32 # define CPPCHAR_SIGNED_T int #elif CHAR_BIT * SIZEOF_LONG >= 32 # define CPPCHAR_SIGNED_T long #else # error "Cannot find a least-32-bit signed integer type" #endif typedef unsigned CPPCHAR_SIGNED_T cppchar_t; typedef CPPCHAR_SIGNED_T cppchar_signed_t; /* Style of header dependencies to generate. */ enum cpp_deps_style { DEPS_NONE = 0, DEPS_USER, DEPS_SYSTEM }; /* The possible normalization levels, from most restrictive to least. */ enum cpp_normalize_level { /* In NFKC. */ normalized_KC = 0, /* In NFC. */ normalized_C, /* In NFC, except for subsequences where being in NFC would make the identifier invalid. */ normalized_identifier_C, /* Not normalized at all. */ normalized_none }; /* This structure is nested inside struct cpp_reader, and carries all the options visible to the command line. */ struct cpp_options { /* Characters between tab stops. */ unsigned int tabstop; /* The language we're preprocessing. */ enum c_lang lang; /* Nonzero means use extra default include directories for C++. */ unsigned char cplusplus; /* Nonzero means handle cplusplus style comments. */ unsigned char cplusplus_comments; /* Nonzero means define __OBJC__, treat @ as a special token, and use the OBJC[PLUS]_INCLUDE_PATH environment variable. */ unsigned char objc; /* Nonzero means don't copy comments into the output file. */ unsigned char discard_comments; /* Nonzero means don't copy comments into the output file during macro expansion. */ unsigned char discard_comments_in_macro_exp; /* Nonzero means process the ISO trigraph sequences. */ unsigned char trigraphs; /* Nonzero means process the ISO digraph sequences. */ unsigned char digraphs; /* Nonzero means to allow hexadecimal floats and LL suffixes. */ unsigned char extended_numbers; /* Nonzero means print names of header files (-H). */ unsigned char print_include_names; /* Nonzero means cpp_pedwarn causes a hard error. */ unsigned char pedantic_errors; /* Nonzero means don't print warning messages. */ unsigned char inhibit_warnings; /* Nonzero means complain about deprecated features. */ unsigned char warn_deprecated; /* Nonzero means don't suppress warnings from system headers. */ unsigned char warn_system_headers; /* Nonzero means don't print error messages. Has no option to select it, but can be set by a user of cpplib (e.g. fix-header). */ unsigned char inhibit_errors; /* Nonzero means warn if slash-star appears in a comment. */ unsigned char warn_comments; /* Nonzero means warn if a user-supplied include directory does not exist. */ unsigned char warn_missing_include_dirs; /* Nonzero means warn if there are any trigraphs. */ unsigned char warn_trigraphs; /* Nonzero means warn about multicharacter charconsts. */ unsigned char warn_multichar; /* Nonzero means warn about various incompatibilities with traditional C. */ unsigned char warn_traditional; /* Nonzero means warn about long long numeric constants. */ unsigned char warn_long_long; /* Nonzero means warn about text after an #endif (or #else). */ unsigned char warn_endif_labels; /* Nonzero means warn about implicit sign changes owing to integer promotions. */ unsigned char warn_num_sign_change; /* Zero means don't warn about __VA_ARGS__ usage in c89 pedantic mode. Presumably the usage is protected by the appropriate #ifdef. */ unsigned char warn_variadic_macros; /* Nonzero means turn warnings into errors. */ unsigned char warnings_are_errors; /* Nonzero means we should look for header.gcc files that remap file names. */ unsigned char remap; /* Zero means dollar signs are punctuation. */ unsigned char dollars_in_ident; /* Nonzero means UCNs are accepted in identifiers. */ unsigned char extended_identifiers; /* True if we should warn about dollars in identifiers or numbers for this translation unit. */ unsigned char warn_dollars; /* Nonzero means warn if undefined identifiers are evaluated in an #if. */ unsigned char warn_undef; /* Nonzero means warn of unused macros from the main file. */ unsigned char warn_unused_macros; /* Nonzero for the 1999 C Standard, including corrigenda and amendments. */ unsigned char c99; /* Nonzero if we are conforming to a specific C or C++ standard. */ unsigned char std; /* Nonzero means give all the error messages the ANSI standard requires. */ unsigned char pedantic; /* Nonzero means we're looking at already preprocessed code, so don't bother trying to do macro expansion and whatnot. */ unsigned char preprocessed; /* Print column number in error messages. */ unsigned char show_column; /* Nonzero means handle C++ alternate operator names. */ unsigned char operator_names; /* True for traditional preprocessing. */ unsigned char traditional; /* Holds the name of the target (execution) character set. */ const char *narrow_charset; /* Holds the name of the target wide character set. */ const char *wide_charset; /* Holds the name of the input character set. */ const char *input_charset; /* The minimum permitted level of normalization before a warning is generated. */ enum cpp_normalize_level warn_normalize; /* True to warn about precompiled header files we couldn't use. */ bool warn_invalid_pch; /* True if dependencies should be restored from a precompiled header. */ bool restore_pch_deps; /* Dependency generation. */ struct { /* Style of header dependencies to generate. */ enum cpp_deps_style style; /* Assume missing files are generated files. */ bool missing_files; /* Generate phony targets for each dependency apart from the first one. */ bool phony_targets; /* If true, no dependency is generated on the main file. */ bool ignore_main_file; } deps; /* Target-specific features set by the front end or client. */ /* Precision for target CPP arithmetic, target characters, target ints and target wide characters, respectively. */ size_t precision, char_precision, int_precision, wchar_precision; /* True means chars (wide chars) are unsigned. */ bool unsigned_char, unsigned_wchar; /* True if the most significant byte in a word has the lowest address in memory. */ bool bytes_big_endian; /* Nonzero means __STDC__ should have the value 0 in system headers. */ unsigned char stdc_0_in_system_headers; /* True means error callback should be used for diagnostics. */ bool client_diagnostic; }; /* Callback for header lookup for HEADER, which is the name of a source file. It is used as a method of last resort to find headers that are not otherwise found during the normal include processing. The return value is the malloced name of a header to try and open, if any, or NULL otherwise. This callback is called only if the header is otherwise unfound. */ typedef const char *(*missing_header_cb)(cpp_reader *, const char *header, cpp_dir **); /* Call backs to cpplib client. */ struct cpp_callbacks { /* Called when a new line of preprocessed output is started. */ void (*line_change) (cpp_reader *, const cpp_token *, int); /* Called when switching to/from a new file. The line_map is for the new file. It is NULL if there is no new file. (In C this happens when done with + and also when done with a main file.) This can be used for resource cleanup. */ void (*file_change) (cpp_reader *, const struct line_map *); void (*dir_change) (cpp_reader *, const char *); void (*include) (cpp_reader *, unsigned int, const unsigned char *, const char *, int, const cpp_token **); void (*define) (cpp_reader *, unsigned int, cpp_hashnode *); void (*undef) (cpp_reader *, unsigned int, cpp_hashnode *); void (*ident) (cpp_reader *, unsigned int, const cpp_string *); void (*def_pragma) (cpp_reader *, unsigned int); int (*valid_pch) (cpp_reader *, const char *, int); void (*read_pch) (cpp_reader *, const char *, int, const char *); missing_header_cb missing_header; /* Called to emit a diagnostic if client_diagnostic option is true. This callback receives the translated message. */ void (*error) (cpp_reader *, int, const char *, va_list *) ATTRIBUTE_FPTR_PRINTF(3,0); }; /* Chain of directories to look for include files in. */ struct cpp_dir { /* NULL-terminated singly-linked list. */ struct cpp_dir *next; /* NAME of the directory, NUL-terminated. */ char *name; unsigned int len; /* One if a system header, two if a system header that has extern "C" guards for C++. */ unsigned char sysp; /* Mapping of file names for this directory for MS-DOS and related platforms. A NULL-terminated array of (from, to) pairs. */ const char **name_map; /* Routine to construct pathname, given the search path name and the HEADER we are trying to find, return a constructed pathname to try and open. If this is NULL, the constructed pathname is as constructed by append_file_to_dir. */ char *(*construct) (const char *header, cpp_dir *dir); /* The C front end uses these to recognize duplicated directories in the search path. */ ino_t ino; dev_t dev; /* Is this a user-supplied directory? */ bool user_supplied_p; }; /* Name under which this program was invoked. */ extern const char *progname; /* The structure of a node in the hash table. The hash table has entries for all identifiers: either macros defined by #define commands (type NT_MACRO), assertions created with #assert (NT_ASSERTION), or neither of the above (NT_VOID). Builtin macros like __LINE__ are flagged NODE_BUILTIN. Poisoned identifiers are flagged NODE_POISONED. NODE_OPERATOR (C++ only) indicates an identifier that behaves like an operator such as "xor". NODE_DIAGNOSTIC is for speed in lex_token: it indicates a diagnostic may be required for this node. Currently this only applies to __VA_ARGS__ and poisoned identifiers. */ /* Hash node flags. */ #define NODE_OPERATOR (1 << 0) /* C++ named operator. */ #define NODE_POISONED (1 << 1) /* Poisoned identifier. */ #define NODE_BUILTIN (1 << 2) /* Builtin macro. */ #define NODE_DIAGNOSTIC (1 << 3) /* Possible diagnostic when lexed. */ #define NODE_WARN (1 << 4) /* Warn if redefined or undefined. */ #define NODE_DISABLED (1 << 5) /* A disabled macro. */ #define NODE_MACRO_ARG (1 << 6) /* Used during #define processing. */ /* Different flavors of hash node. */ enum node_type { NT_VOID = 0, /* No definition yet. */ NT_MACRO, /* A macro of some form. */ NT_ASSERTION /* Predicate for #assert. */ }; /* Different flavors of builtin macro. _Pragma is an operator, but we handle it with the builtin code for efficiency reasons. */ enum builtin_type { BT_SPECLINE = 0, /* `__LINE__' */ BT_DATE, /* `__DATE__' */ BT_FILE, /* `__FILE__' */ BT_BASE_FILE, /* `__BASE_FILE__' */ BT_INCLUDE_LEVEL, /* `__INCLUDE_LEVEL__' */ BT_TIME, /* `__TIME__' */ BT_STDC, /* `__STDC__' */ BT_PRAGMA, /* `_Pragma' operator */ BT_TIMESTAMP, /* `__TIMESTAMP__' */ BT_COUNTER /* `__COUNTER__' */ }; #define CPP_HASHNODE(HNODE) ((cpp_hashnode *) (HNODE)) #define HT_NODE(NODE) ((ht_identifier *) (NODE)) #define NODE_LEN(NODE) HT_LEN (&(NODE)->ident) #define NODE_NAME(NODE) HT_STR (&(NODE)->ident) /* Specify which field, if any, of the union is used. */ enum { NTV_MACRO, NTV_ANSWER, NTV_BUILTIN, NTV_ARGUMENT, NTV_NONE }; #define CPP_HASHNODE_VALUE_IDX(HNODE) \ ((HNODE.flags & NODE_MACRO_ARG) ? NTV_ARGUMENT \ : HNODE.type == NT_MACRO ? ((HNODE.flags & NODE_BUILTIN) \ ? NTV_BUILTIN : NTV_MACRO) \ : HNODE.type == NT_ASSERTION ? NTV_ANSWER \ : NTV_NONE) /* The common part of an identifier node shared amongst all 3 C front ends. Also used to store CPP identifiers, which are a superset of identifiers in the grammatical sense. */ union _cpp_hashnode_value GTY(()) { /* If a macro. */ cpp_macro * GTY((tag ("NTV_MACRO"))) macro; /* Answers to an assertion. */ struct answer * GTY ((tag ("NTV_ANSWER"))) answers; /* Code for a builtin macro. */ enum builtin_type GTY ((tag ("NTV_BUILTIN"))) builtin; /* Macro argument index. */ unsigned short GTY ((tag ("NTV_ARGUMENT"))) arg_index; }; struct cpp_hashnode GTY(()) { struct ht_identifier ident; unsigned int is_directive : 1; unsigned int directive_index : 7; /* If is_directive, then index into directive table. Otherwise, a NODE_OPERATOR. */ unsigned char rid_code; /* Rid code - for front ends. */ ENUM_BITFIELD(node_type) type : 8; /* CPP node type. */ unsigned char flags; /* CPP flags. */ union _cpp_hashnode_value GTY ((desc ("CPP_HASHNODE_VALUE_IDX (%1)"))) value; }; /* Call this first to get a handle to pass to other functions. If you want cpplib to manage its own hashtable, pass in a NULL pointer. Otherwise you should pass in an initialized hash table that cpplib will share; this technique is used by the C front ends. */ extern cpp_reader *cpp_create_reader (enum c_lang, struct ht *, struct line_maps *); /* Call this to change the selected language standard (e.g. because of command line options). */ extern void cpp_set_lang (cpp_reader *, enum c_lang); /* Set the include paths. */ extern void cpp_set_include_chains (cpp_reader *, cpp_dir *, cpp_dir *, int); /* Call these to get pointers to the options, callback, and deps structures for a given reader. These pointers are good until you call cpp_finish on that reader. You can either edit the callbacks through the pointer returned from cpp_get_callbacks, or set them with cpp_set_callbacks. */ extern cpp_options *cpp_get_options (cpp_reader *); extern cpp_callbacks *cpp_get_callbacks (cpp_reader *); extern void cpp_set_callbacks (cpp_reader *, cpp_callbacks *); extern struct deps *cpp_get_deps (cpp_reader *); /* This function reads the file, but does not start preprocessing. It returns the name of the original file; this is the same as the input file, except for preprocessed input. This will generate at least one file change callback, and possibly a line change callback too. If there was an error opening the file, it returns NULL. */ extern const char *cpp_read_main_file (cpp_reader *, const char *); /* Set up built-ins like __FILE__. */ extern void cpp_init_builtins (cpp_reader *, int); /* This is called after options have been parsed, and partially processed. */ extern void cpp_post_options (cpp_reader *); /* Set up translation to the target character set. */ extern void cpp_init_iconv (cpp_reader *); /* Call this to finish preprocessing. If you requested dependency generation, pass an open stream to write the information to, otherwise NULL. It is your responsibility to close the stream. Returns cpp_errors (pfile). */ extern int cpp_finish (cpp_reader *, FILE *deps_stream); /* Call this to release the handle at the end of preprocessing. Any use of the handle after this function returns is invalid. Returns cpp_errors (pfile). */ extern void cpp_destroy (cpp_reader *); /* Error count. */ extern unsigned int cpp_errors (cpp_reader *); extern unsigned int cpp_token_len (const cpp_token *); extern unsigned char *cpp_token_as_text (cpp_reader *, const cpp_token *); extern unsigned char *cpp_spell_token (cpp_reader *, const cpp_token *, unsigned char *, bool); extern void cpp_register_pragma (cpp_reader *, const char *, const char *, void (*) (cpp_reader *), bool); extern void cpp_register_deferred_pragma (cpp_reader *, const char *, const char *, unsigned, bool, bool); extern int cpp_avoid_paste (cpp_reader *, const cpp_token *, const cpp_token *); extern const cpp_token *cpp_get_token (cpp_reader *); extern const unsigned char *cpp_macro_definition (cpp_reader *, const cpp_hashnode *); extern void _cpp_backup_tokens (cpp_reader *, unsigned int); /* Evaluate a CPP_CHAR or CPP_WCHAR token. */ extern cppchar_t cpp_interpret_charconst (cpp_reader *, const cpp_token *, unsigned int *, int *); /* Evaluate a vector of CPP_STRING or CPP_WSTRING tokens. */ extern bool cpp_interpret_string (cpp_reader *, const cpp_string *, size_t, cpp_string *, bool); extern bool cpp_interpret_string_notranslate (cpp_reader *, const cpp_string *, size_t, cpp_string *, bool); /* Convert a host character constant to the execution character set. */ extern cppchar_t cpp_host_to_exec_charset (cpp_reader *, cppchar_t); /* Used to register macros and assertions, perhaps from the command line. The text is the same as the command line argument. */ extern void cpp_define (cpp_reader *, const char *); extern void cpp_assert (cpp_reader *, const char *); extern void cpp_undef (cpp_reader *, const char *); extern void cpp_unassert (cpp_reader *, const char *); /* Undefine all macros and assertions. */ extern void cpp_undef_all (cpp_reader *); extern cpp_buffer *cpp_push_buffer (cpp_reader *, const unsigned char *, size_t, int); extern int cpp_defined (cpp_reader *, const unsigned char *, int); /* A preprocessing number. Code assumes that any unused high bits of the double integer are set to zero. */ typedef unsigned HOST_WIDE_INT cpp_num_part; typedef struct cpp_num cpp_num; struct cpp_num { cpp_num_part high; cpp_num_part low; bool unsignedp; /* True if value should be treated as unsigned. */ bool overflow; /* True if the most recent calculation overflowed. */ }; /* cpplib provides two interfaces for interpretation of preprocessing numbers. cpp_classify_number categorizes numeric constants according to their field (integer, floating point, or invalid), radix (decimal, octal, hexadecimal), and type suffixes. */ #define CPP_N_CATEGORY 0x000F #define CPP_N_INVALID 0x0000 #define CPP_N_INTEGER 0x0001 #define CPP_N_FLOATING 0x0002 #define CPP_N_WIDTH 0x00F0 #define CPP_N_SMALL 0x0010 /* int, float. */ #define CPP_N_MEDIUM 0x0020 /* long, double. */ #define CPP_N_LARGE 0x0040 /* long long, long double. */ #define CPP_N_RADIX 0x0F00 #define CPP_N_DECIMAL 0x0100 #define CPP_N_HEX 0x0200 #define CPP_N_OCTAL 0x0400 +#define CPP_N_BINARY 0x0800 #define CPP_N_UNSIGNED 0x1000 /* Properties. */ #define CPP_N_IMAGINARY 0x2000 #define CPP_N_DFLOAT 0x4000 #define CPP_N_DEFAULT 0x8000 /* Classify a CPP_NUMBER token. The return value is a combination of the flags from the above sets. */ extern unsigned cpp_classify_number (cpp_reader *, const cpp_token *); /* Evaluate a token classified as category CPP_N_INTEGER. */ extern cpp_num cpp_interpret_integer (cpp_reader *, const cpp_token *, unsigned int type); /* Sign extend a number, with PRECISION significant bits and all others assumed clear, to fill out a cpp_num structure. */ cpp_num cpp_num_sign_extend (cpp_num, size_t); /* Diagnostic levels. To get a diagnostic without associating a position in the translation unit with it, use cpp_error_with_line with a line number of zero. */ /* Warning, an error with -Werror. */ #define CPP_DL_WARNING 0x00 /* Same as CPP_DL_WARNING, except it is not suppressed in system headers. */ #define CPP_DL_WARNING_SYSHDR 0x01 /* Warning, an error with -pedantic-errors or -Werror. */ #define CPP_DL_PEDWARN 0x02 /* An error. */ #define CPP_DL_ERROR 0x03 /* An internal consistency check failed. Prints "internal error: ", otherwise the same as CPP_DL_ERROR. */ #define CPP_DL_ICE 0x04 /* Extracts a diagnostic level from an int. */ #define CPP_DL_EXTRACT(l) (l & 0xf) /* Nonzero if a diagnostic level is one of the warnings. */ #define CPP_DL_WARNING_P(l) (CPP_DL_EXTRACT (l) >= CPP_DL_WARNING \ && CPP_DL_EXTRACT (l) <= CPP_DL_PEDWARN) /* Output a diagnostic of some kind. */ extern void cpp_error (cpp_reader *, int, const char *msgid, ...) ATTRIBUTE_PRINTF_3; /* Output a diagnostic with "MSGID: " preceding the error string of errno. No location is printed. */ extern void cpp_errno (cpp_reader *, int, const char *msgid); /* Same as cpp_error, except additionally specifies a position as a (translation unit) physical line and physical column. If the line is zero, then no location is printed. */ extern void cpp_error_with_line (cpp_reader *, int, source_location, unsigned, const char *msgid, ...) ATTRIBUTE_PRINTF_5; /* In cpplex.c */ extern int cpp_ideq (const cpp_token *, const char *); extern void cpp_output_line (cpp_reader *, FILE *); extern void cpp_output_token (const cpp_token *, FILE *); extern const char *cpp_type2name (enum cpp_ttype); /* Returns the value of an escape sequence, truncated to the correct target precision. PSTR points to the input pointer, which is just after the backslash. LIMIT is how much text we have. WIDE is true if the escape sequence is part of a wide character constant or string literal. Handles all relevant diagnostics. */ extern cppchar_t cpp_parse_escape (cpp_reader *, const unsigned char ** pstr, const unsigned char *limit, int wide); /* In cpphash.c */ /* Lookup an identifier in the hashtable. Puts the identifier in the table if it is not already there. */ extern cpp_hashnode *cpp_lookup (cpp_reader *, const unsigned char *, unsigned int); typedef int (*cpp_cb) (cpp_reader *, cpp_hashnode *, void *); extern void cpp_forall_identifiers (cpp_reader *, cpp_cb, void *); /* In cppmacro.c */ extern void cpp_scan_nooutput (cpp_reader *); extern int cpp_sys_macro_p (cpp_reader *); extern unsigned char *cpp_quote_string (unsigned char *, const unsigned char *, unsigned int); /* In cppfiles.c */ extern bool cpp_included (cpp_reader *, const char *); extern void cpp_make_system_header (cpp_reader *, int, int); extern bool cpp_push_include (cpp_reader *, const char *); extern void cpp_change_file (cpp_reader *, enum lc_reason, const char *); extern const char *cpp_get_path (struct _cpp_file *); extern cpp_dir *cpp_get_dir (struct _cpp_file *); extern cpp_buffer *cpp_get_buffer (cpp_reader *); extern struct _cpp_file *cpp_get_file (cpp_buffer *); extern cpp_buffer *cpp_get_prev (cpp_buffer *); /* In cpppch.c */ struct save_macro_data; extern int cpp_save_state (cpp_reader *, FILE *); extern int cpp_write_pch_deps (cpp_reader *, FILE *); extern int cpp_write_pch_state (cpp_reader *, FILE *); extern int cpp_valid_state (cpp_reader *, const char *, int); extern void cpp_prepare_state (cpp_reader *, struct save_macro_data **); extern int cpp_read_state (cpp_reader *, const char *, FILE *, struct save_macro_data *); #ifdef __cplusplus } #endif #endif /* ! LIBCPP_CPPLIB_H */