Index: head/UPDATING =================================================================== --- head/UPDATING (revision 242623) +++ head/UPDATING (revision 242624) @@ -1,1705 +1,1712 @@ Updating Information for FreeBSD current users This file is maintained and copyrighted by M. Warner Losh . See end of file for further details. For commonly done items, please see the COMMON ITEMS: section later in the file. These instructions assume that you basically know what you are doing. If not, then please consult the FreeBSD handbook. Items affecting the ports and packages system can be found in /usr/ports/UPDATING. Please read that file before running portupgrade. NOTE TO PEOPLE WHO THINK THAT FreeBSD 10.x IS SLOW: FreeBSD 10.x has many debugging features turned on, in both the kernel and userland. These features attempt to detect incorrect use of system primitives, and encourage loud failure through extra sanity checking and fail stop semantics. They also substantially impact system performance. If you want to do performance measurement, benchmarking, and optimization, you'll want to turn them off. This includes various WITNESS- related kernel options, INVARIANTS, malloc debugging flags in userland, and various verbose features in the kernel. Many developers choose to disable these features on build machines to maximize performance. (To completely disable malloc debugging, define MALLOC_PRODUCTION in /etc/make.conf, or to merely disable the most expensive debugging functionality run "ln -s 'abort:false,junk:false' /etc/malloc.conf".) +20121105: + On i386 and amd64 systems WITH_CLANG_IS_CC is now the default. + This means that the world and kernel will be compiled with clang + and that clang will be installed as /usr/bin/cc, /usr/bin/c++, + and /usr/bin/cpp. To disable this behavior and revert to building + with gcc, compiler with WITHOUT_CLANG_IS_CC. + 20121102: The IPFIREWALL_FORWARD kernel option has been removed. Its functionality now turned on by default. 20121023: The ZERO_COPY_SOCKET kernel option has been removed and split into SOCKET_SEND_COW and SOCKET_RECV_PFLIP. NB: SOCKET_SEND_COW uses the VM page based copy-on-write mechanism which is not safe and may result in kernel crashes. NB: The SOCKET_RECV_PFLIP mechanism is useless as no current driver supports disposeable external page sized mbuf storage. Proper replacements for both zero-copy mechanisms are under consideration and will eventually lead to complete removal of the two kernel options. 20121023: The IPv4 network stack has been converted to network byte order. The following modules need to be recompiled together with kernel: carp(4), divert(4), gif(4), siftr(4), gre(4), pf(4), ipfw(4), ng_ipfw(4), stf(4). 20121022: Support for non-MPSAFE filesystems was removed from VFS. The VFS_VERSION was bumped, all filesystem modules shall be recompiled. 20121018: All the non-MPSAFE filesystems have been disconnected from the build. The full list includes: codafs, hpfs, ntfs, nwfs, portalfs, smbfs, xfs. 20121016: The interface cloning API and ABI has changed. The following modules need to be recompiled together with kernel: ipfw(4), pfsync(4), pflog(4), usb(4), wlan(4), stf(4), vlan(4), disc(4), edsc(4), if_bridge(4), gif(4), tap(4), faith(4), epair(4), enc(4), tun(4), if_lagg(4), gre(4). 20121015: The sdhci driver was split in two parts: sdhci (generic SD Host Controller logic) and sdhci_pci (actual hardware driver). No kernel config modifications are required, but if you load sdhc as a module you must switch to sdhci_pci instead. 20121014: Import the FUSE kernel and userland support into base system. 20121013: The GNU sort(1) program has been removed since the BSD-licensed sort(1) has been the default for quite some time and no serious problems have been reported. The corresponding WITH_GNU_SORT knob has also gone. 20121006: The pfil(9) API/ABI for AF_INET family has been changed. Packet filtering modules: pf(4), ipfw(4), ipfilter(4) need to be recompiled with new kernel. 20121001: The net80211(4) ABI has been changed to allow for improved driver PS-POLL and power-save support. All wireless drivers need to be recompiled to work with the new kernel. 20120913: The random(4) support for the VIA hardware random number generator (`PADLOCK') is no longer enabled unconditionally. Add the PADLOCK_RNG option in the custom kernel config if needed. The GENERIC kernels on i386 and amd64 do include the option, so the change only affects the custom kernel configurations. 20120908: The pf(4) packet filter ABI has been changed. pfctl(8) and snmp_pf module need to be recompiled to work with new kernel. 20120828: A new ZFS feature flag "com.delphix:empty_bpobj" has been merged to -HEAD. Pools that have empty_bpobj in active state can not be imported read-write with ZFS implementations that do not support this feature. For more information read the zpool-features(5) manual page. 20120727: The sparc64 ZFS loader has been changed to no longer try to auto- detect ZFS providers based on diskN aliases but now requires these to be explicitly listed in the OFW boot-device environment variable. 20120712: The OpenSSL has been upgraded to 1.0.1c. Any binaries requiring libcrypto.so.6 or libssl.so.6 must be recompiled. Also, there are configuration changes. Make sure to merge /etc/ssl/openssl.cnf. 20120712: The following sysctls and tunables have been renamed for consistency with other variables: kern.cam.da.da_send_ordered -> kern.cam.da.send_ordered kern.cam.ada.ada_send_ordered -> kern.cam.ada.send_ordered 20120628: The sort utility has been replaced with BSD sort. For now, GNU sort is also available as "gnusort" or the default can be set back to GNU sort by setting WITH_GNU_SORT. In this case, BSD sort will be installed as "bsdsort". 20120611: A new version of ZFS (pool version 5000) has been merged to -HEAD. Starting with this version the old system of ZFS pool versioning is superseded by "feature flags". This concept enables forward compatibility against certain future changes in functionality of ZFS pools. The first read-only compatible "feature flag" for ZFS pools is named "com.delphix:async_destroy". For more information read the new zpool-features(5) manual page. Please refer to the "ZFS notes" section of this file for information on upgrading boot ZFS pools. 20120417: The malloc(3) implementation embedded in libc now uses sources imported as contrib/jemalloc. The most disruptive API change is to /etc/malloc.conf. If your system has an old-style /etc/malloc.conf, delete it prior to installworld, and optionally re-create it using the new format after rebooting. See malloc.conf(5) for details (specifically the TUNING section and the "opt.*" entries in the MALLCTL NAMESPACE section). 20120328: Big-endian MIPS TARGET_ARCH values no longer end in "eb". mips64eb is now spelled mips64. mipsn32eb is now spelled mipsn32. mipseb is now spelled mips. This is to aid compatibility with third-party software that expects this naming scheme in uname(3). Little-endian settings are unchanged. 20120306: Disable by default the option VFS_ALLOW_NONMPSAFE for all supported platforms. 20120229: Now unix domain sockets behave "as expected" on nullfs(5). Previously nullfs(5) did not pass through all behaviours to the underlying layer, as a result if we bound to a socket on the lower layer we could connect only to the lower path; if we bound to the upper layer we could connect only to the upper path. The new behavior is one can connect to both the lower and the upper paths regardless what layer path one binds to. 20120211: The getifaddrs upgrade path broken with 20111215 has been restored. If you have upgraded in between 20111215 and 20120209 you need to recompile libc again with your kernel. You still need to recompile world to be able to configure CARP but this restriction already comes from 20111215. 20120114: The set_rcvar() function has been removed from /etc/rc.subr. All base and ports rc.d scripts have been updated, so if you have a port installed with a script in /usr/local/etc/rc.d you can either hand-edit the rcvar= line, or reinstall the port. An easy way to handle the mass-update of /etc/rc.d: rm /etc/rc.d/* && mergemaster -i 20120109: panic(9) now stops other CPUs in the SMP systems, disables interrupts on the current CPU and prevents other threads from running. This behavior can be reverted using the kern.stop_scheduler_on_panic tunable/sysctl. The new behavior can be incompatible with kern.sync_on_panic. 20111215: The carp(4) facility has been changed significantly. Configuration of the CARP protocol via ifconfig(8) has changed, as well as format of CARP events submitted to devd(8) has changed. See manual pages for more information. The arpbalance feature of carp(4) is currently not supported anymore. Size of struct in_aliasreq, struct in6_aliasreq has changed. User utilities using SIOCAIFADDR, SIOCAIFADDR_IN6, e.g. ifconfig(8), need to be recompiled. 20111122: The acpi_wmi(4) status device /dev/wmistat has been renamed to /dev/wmistat0. 20111108: The option VFS_ALLOW_NONMPSAFE option has been added in order to explicitely support non-MPSAFE filesystems. It is on by default for all supported platform at this present time. 20111101: The broken amd(4) driver has been replaced with esp(4) in the amd64, i386 and pc98 GENERIC kernel configuration files. 20110930: sysinstall has been removed 20110923: The stable/9 branch created in subversion. This corresponds to the RELENG_9 branch in CVS. 20110913: This commit modifies vfs_register() so that it uses a hash calculation to set vfc_typenum, which is enabled by default. The first time a system is booted after this change, the vfc_typenum values will change for all file systems. The main effect of this is a change to the NFS server file handles for file systems that use vfc_typenum in their fsid, such as ZFS. It will, however, prevent vfc_typenum from changing when file systems are loaded in a different order for subsequent reboots. To disable this, you can set vfs.typenumhash=0 in /boot/loader.conf until you are ready to remount all NFS clients after a reboot. 20110828: Bump the shared library version numbers for libraries that do not use symbol versioning, have changed the ABI compared to stable/8 and which shared library version was not bumped. Done as part of 9.0-RELEASE cycle. 20110815: During the merge of Capsicum features, the fget(9) KPI was modified. This may require the rebuilding of out-of-tree device drivers -- issues have been reported specifically with the nVidia device driver. __FreeBSD_version is bumped to 900041. Also, there is a period between 20110811 and 20110814 where the special devices /dev/{stdin,stdout,stderr} did not work correctly. Building world from a kernel during that window may not work. 20110628: The packet filter (pf) code has been updated to OpenBSD 4.5. You need to update userland tools to be in sync with kernel. This update breaks backward compatibility with earlier pfsync(4) versions. Care must be taken when updating redundant firewall setups. 20110608: The following sysctls and tunables are retired on x86 platforms: machdep.hlt_cpus machdep.hlt_logical_cpus The following sysctl is retired: machdep.hyperthreading_allowed The sysctls were supposed to provide a way to dynamically offline and online selected CPUs on x86 platforms, but the implementation has not been reliable especially with SCHED_ULE scheduler. machdep.hyperthreading_allowed tunable is still available to ignore hyperthreading CPUs at OS level. Individual CPUs can be disabled using hint.lapic.X.disabled tunable, where X is an APIC ID of a CPU. Be advised, though, that disabling CPUs in non-uniform fashion will result in non-uniform topology and may lead to sub-optimal system performance with SCHED_ULE, which is a default scheduler. 20110607: cpumask_t type is retired and cpuset_t is used in order to describe a mask of CPUs. 20110531: Changes to ifconfig(8) for dynamic address family detection mandate that you are running a kernel of 20110525 or later. Make sure to follow the update procedure to boot a new kernel before installing world. 20110513: Support for sun4v architecture is officially dropped 20110503: Several KPI breaking changes have been committed to the mii(4) layer, the PHY drivers and consequently some Ethernet drivers using mii(4). This means that miibus.ko and the modules of the affected Ethernet drivers need to be recompiled. Note to kernel developers: Given that the OUI bit reversion problem was fixed as part of these changes all mii(4) commits related to OUIs, i.e. to sys/dev/mii/miidevs, PHY driver probing and vendor specific handling, no longer can be merged verbatim to stable/8 and previous branches. 20110430: Users of the Atheros AR71xx SoC code now need to add 'device ar71xx_pci' into their kernel configurations along with 'device pci'. 20110427: The default NFS client is now the new NFS client, so fstype "newnfs" is now "nfs" and the regular/old NFS client is now fstype "oldnfs". Although mounts via fstype "nfs" will usually work without userland changes, it is recommended that the mount(8) and mount_nfs(8) commands be rebuilt from sources and that a link to mount_nfs called mount_oldnfs be created. The new client is compiled into the kernel with "options NFSCL" and this is needed for diskless root file systems. The GENERIC kernel configs have been changed to use NFSCL and NFSD (the new server) instead of NFSCLIENT and NFSSERVER. To use the regular/old client, you can "mount -t oldnfs ...". For a diskless root file system, you must also include a line like: vfs.root.mountfrom="oldnfs:" in the boot/loader.conf on the root fs on the NFS server to make a diskless root fs use the old client. 20110424: The GENERIC kernels for all architectures now default to the new CAM-based ATA stack. It means that all legacy ATA drivers were removed and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers starting from zero for each type in order of detection, unless configured otherwise with tunables, see cam(4)). There will be symbolic links created in /dev/ to map old adX devices to the respective adaY. They should provide basic compatibility for file systems mounting in most cases, but they do not support old user-level APIs and do not have respective providers in GEOM. Consider using updated management tools with new device names. It is possible to load devices ahci, ata, siis and mvs as modules, but option ATA_CAM should remain in kernel configuration to make ata module work as CAM driver supporting legacy ATA controllers. Device ata still can be used in modular fashion (atacore + ...). Modules atadisk and atapi* are not used and won't affect operation in ATA_CAM mode. Note that to use CAM-based ATA kernel should include CAM devices scbus, pass, da (or explicitly ada), cd and optionally others. All of them are parts of the cam module. ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX. No kernel config options or code have been removed, so if a problem arises, please report it and optionally revert to the old ATA stack. In order to do it you can remove from the kernel config: options ATA_CAM device ahci device mvs device siis , and instead add back: device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives 20110423: The default NFS server has been changed to the new server, which was referred to as the experimental server. If you need to switch back to the old NFS server, you must now put the "-o" option on both the mountd and nfsd commands. This can be done using the mountd_flags and nfs_server_flags rc.conf variables until an update to the rc scripts is committed, which is coming soon. 20110418: The GNU Objective-C runtime library (libobjc), and other Objective-C related components have been removed from the base system. If you require an Objective-C library, please use one of the available ports. 20110331: ath(4) has been split into bus- and device- modules. if_ath contains the HAL, the TX rate control and the network device code. if_ath_pci contains the PCI bus glue. For Atheros MIPS embedded systems, if_ath_ahb contains the AHB glue. Users need to load both if_ath_pci and if_ath in order to use ath on everything else. TO REPEAT: if_ath_ahb is not needed for normal users. Normal users only need to load if_ath and if_ath_pci for ath(4) operation. 20110314: As part of the replacement of sysinstall, the process of building release media has changed significantly. For details, please re-read release(7), which has been updated to reflect the new build process. 20110218: GNU binutils 2.17.50 (as of 2007-07-03) has been merged to -HEAD. This is the last available version under GPLv2. It brings a number of new features, such as support for newer x86 CPU's (with SSE-3, SSSE-3, SSE 4.1 and SSE 4.2), better support for powerpc64, a number of new directives, and lots of other small improvements. See the ChangeLog file in contrib/binutils for the full details. 20110218: IPsec's HMAC_SHA256-512 support has been fixed to be RFC4868 compliant, and will now use half of hash for authentication. This will break interoperability with all stacks (including all actual FreeBSD versions) who implement draft-ietf-ipsec-ciph-sha-256-00 (they use 96 bits of hash for authentication). The only workaround with such peers is to use another HMAC algorithm for IPsec ("phase 2") authentication. 20110207: Remove the uio_yield prototype and symbol. This function has been misnamed since it was introduced and should not be globally exposed with this name. The equivalent functionality is now available using kern_yield(curthread->td_user_pri). The function remains undocumented. 20110112: A SYSCTL_[ADD_]UQUAD was added for unsigned uint64_t pointers, symmetric with the existing SYSCTL_[ADD_]QUAD. Type checking for scalar sysctls is defined but disabled. Code that needs UQUAD to pass the type checking that must compile on older systems where the define is not present can check against __FreeBSD_version >= 900030. The system dialog(1) has been replaced with a new version previously in ports as devel/cdialog. dialog(1) is mostly command-line compatible with the previous version, but the libdialog associated with it has a largely incompatible API. As such, the original version of libdialog will be kept temporarily as libodialog, until its base system consumers are replaced or updated. Bump __FreeBSD_version to 900030. 20110103: If you are trying to run make universe on a -stable system, and you get the following warning: "Makefile", line 356: "Target architecture for i386/conf/GENERIC unknown. config(8) likely too old." or something similar to it, then you must upgrade your -stable system to 8.2-Release or newer (really, any time after r210146 7/15/2010 in stable/8) or build the config from the latest stable/8 branch and install it on your system. Prior to this date, building a current universe on 8-stable system from between 7/15/2010 and 1/2/2011 would result in a weird shell parsing error in the first kernel build phase. A new config on those old systems will fix that problem for older versions of -current. 20101228: The TCP stack has been modified to allow Khelp modules to interact with it via helper hook points and store per-connection data in the TCP control block. Bump __FreeBSD_version to 900029. User space tools that rely on the size of struct tcpcb in tcp_var.h (e.g. sockstat) need to be recompiled. 20101114: Generic IEEE 802.3 annex 31B full duplex flow control support has been added to mii(4) and bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4), e1000phy(4) as well as ip1000phy() have been converted to take advantage of it instead of using custom implementations. This means that these drivers now no longer unconditionally advertise support for flow control but only do so if flow control is a selected media option. This was implemented in the generic support that way in order to allow flow control to be switched on and off via ifconfig(8) with the PHY specific default to typically off in order to protect from unwanted effects. Consequently, if you used flow control with one of the above mentioned drivers you now need to explicitly enable it, for example via: ifconfig bge0 media auto mediaopt flowcontrol Along with the above mentioned changes generic support for setting 1000baseT master mode also has been added and brgphy(4), ciphy(4), e1000phy(4) as well as ip1000phy(4) have been converted to take advantage of it. This means that these drivers now no longer take the link0 parameter for selecting master mode but the master media option has to be used instead, for example like in the following: ifconfig bge0 media 1000baseT mediaopt full-duplex,master Selection of master mode now is also available with all other PHY drivers supporting 1000baseT. 20101111: The TCP stack has received a significant update to add support for modularised congestion control and generally improve the clarity of congestion control decisions. Bump __FreeBSD_version to 900025. User space tools that rely on the size of struct tcpcb in tcp_var.h (e.g. sockstat) need to be recompiled. 20101002: The man(1) utility has been replaced by a new version that no longer uses /etc/manpath.config. Please consult man.conf(5) for how to migrate local entries to the new format. 20100928: The copyright strings printed by login(1) and sshd(8) at the time of a new connection have been removed to follow other operating systems and upstream sshd. 20100915: A workaround for a fixed ld bug has been removed in kernel code, so make sure that your system ld is built from sources after revision 210245 from 2010-07-19 (r211583 if building head kernel on stable/8, r211584 for stable/7; both from 2010-08-21). A symptom of incorrect ld version is different addresses for set_pcpu section and __start_set_pcpu symbol in kernel and/or modules. 20100913: The $ipv6_prefer variable in rc.conf(5) has been split into $ip6addrctl_policy and $ipv6_activate_all_interfaces. The $ip6addrctl_policy is a variable to choose a pre-defined address selection policy set by ip6addrctl(8). A value "ipv4_prefer", "ipv6_prefer" or "AUTO" can be specified. The default is "AUTO". The $ipv6_activate_all_interfaces specifies whether IFDISABLED flag (see an entry of 20090926) is set on an interface with no corresponding $ifconfig_IF_ipv6 line. The default is "NO" for security reason. If you want IPv6 link-local address on all interfaces by default, set this to "YES". The old ipv6_prefer="YES" is equivalent to ipv6_activate_all_interfaces="YES" and ip6addrctl_policy="ipv6_prefer". 20100913: DTrace has grown support for userland tracing. Due to this, DTrace is now i386 and amd64 only. dtruss(1) is now installed by default on those systems and a new kernel module is needed for userland tracing: fasttrap. No changes to your kernel config file are necessary to enable userland tracing, but you might consider adding 'STRIP=' and 'CFLAGS+=-fno-omit-frame-pointer' to your make.conf if you want to have informative userland stack traces in DTrace (ustack). 20100725: The acpi_aiboost(4) driver has been removed in favor of the new aibs(4) driver. You should update your kernel configuration file. 20100722: BSD grep has been imported to the base system and it is built by default. It is completely BSD licensed, highly GNU-compatible, uses less memory than its GNU counterpart and has a small codebase. However, it is slower than its GNU counterpart, which is mostly noticeable for larger searches, for smaller ones it is measurable but not significant. The reason is complex, the most important factor is that we lack a modern and efficient regex library and GNU overcomes this by optimizing the searches internally. Future work on improving the regex performance is planned, for the meantime, users that need better performance, can build GNU grep instead by setting the WITH_GNU_GREP knob. 20100713: Due to the import of powerpc64 support, all existing powerpc kernel configuration files must be updated with a machine directive like this: machine powerpc powerpc In addition, an updated config(8) is required to build powerpc kernels after this change. 20100713: A new version of ZFS (version 15) has been merged to -HEAD. This version uses a python library for the following subcommands: zfs allow, zfs unallow, zfs groupspace, zfs userspace. For full functionality of these commands the following port must be installed: sysutils/py-zfs 20100429: 'vm_page's are now hashed by physical address to an array of mutexes. Currently this is only used to serialize access to hold_count. Over time the page queue mutex will be peeled away. This changes the size of pmap on every architecture. And requires all callers of vm_page_hold and vm_page_unhold to be updated. 20100402: WITH_CTF can now be specified in src.conf (not recommended, there are some problems with static executables), make.conf (would also affect ports which do not use GNU make and do not override the compile targets) or in the kernel config (via "makeoptions WITH_CTF=yes"). When WITH_CTF was specified there before this was silently ignored, so make sure that WITH_CTF is not used in places which could lead to unwanted behavior. 20100311: The kernel option COMPAT_IA32 has been replaced with COMPAT_FREEBSD32 to allow 32-bit compatibility on non-x86 platforms. All kernel configurations on amd64 and ia64 platforms using these options must be modified accordingly. 20100113: The utmp user accounting database has been replaced with utmpx, the user accounting interface standardized by POSIX. Unfortunately the semantics of utmp and utmpx don't match, making it practically impossible to support both interfaces. The user accounting database is used by tools like finger(1), last(1), talk(1), w(1) and ac(8). All applications in the base system use utmpx. This means only local binaries (e.g. from the ports tree) may still use these utmp database files. These applications must be rebuilt to make use of utmpx. After the system has been upgraded, it is safe to remove the old log files (/var/run/utmp, /var/log/lastlog and /var/log/wtmp*), assuming their contents is of no importance anymore. Old wtmp databases can only be used by last(1) and ac(8) after they have been converted to the new format using wtmpcvt(1). 20100108: Introduce the kernel thread "deadlock resolver" (which can be enabled via the DEADLKRES option, see NOTES for more details) and the sleepq_type() function for sleepqueues. 20091202: The rc.firewall and rc.firewall6 were unified, and rc.firewall6 and rc.d/ip6fw were removed. According to the removal of rc.d/ip6fw, ipv6_firewall_* rc variables are obsoleted. Instead, the following new rc variables are added to rc.d/ipfw: firewall_client_net_ipv6, firewall_simple_iif_ipv6, firewall_simple_inet_ipv6, firewall_simple_oif_ipv6, firewall_simple_onet_ipv6, firewall_trusted_ipv6 The meanings correspond to the relevant IPv4 variables. 20091125: 8.0-RELEASE. 20091113: The default terminal emulation for syscons(4) has been changed from cons25 to xterm on all platforms except pc98. This means that the /etc/ttys file needs to be updated to ensure correct operation of applications on the console. The terminal emulation style can be toggled per window by using vidcontrol(1)'s -T flag. The TEKEN_CONS25 kernel configuration options can be used to change the compile-time default back to cons25. To prevent graphical artifacts, make sure the TERM environment variable is set to match the terminal emulation that is being performed by syscons(4). 20091109: The layout of the structure ieee80211req_scan_result has changed. Applications that require wireless scan results (e.g. ifconfig(8)) from net80211 need to be recompiled. Applications such as wpa_supplicant(8) may require a full world build without using NO_CLEAN in order to get synchronized with the new structure. 20091025: The iwn(4) driver has been updated to support the 5000 and 5150 series. There's one kernel module for each firmware. Adding "device iwnfw" to the kernel configuration file means including all three firmware images inside the kernel. If you want to include just the one for your wireless card, use the devices iwn4965fw, iwn5000fw or iwn5150fw. 20090926: The rc.d/network_ipv6, IPv6 configuration script has been integrated into rc.d/netif. The changes are the following: 1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF for IPv4. For aliases, $ifconfig_IF_aliasN should be used. Note that both variables need the "inet6" keyword at the head. Do not set $ipv6_network_interfaces manually if you do not understand what you are doing. It is not needed in most cases. $ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but they are obsolete. 2. $ipv6_enable is obsolete. Use $ipv6_prefer and "inet6 accept_rtadv" keyword in ifconfig(8) instead. If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and all configured interfaces have "inet6 accept_rtadv" in the $ifconfig_IF_ipv6. These are for backward compatibility. 3. A new variable $ipv6_prefer has been added. If NO, IPv6 functionality of interfaces with no corresponding $ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag, and the default address selection policy of ip6addrctl(8) is the IPv4-preferred one (see rc.d/ip6addrctl for more details). Note that if you want to configure IPv6 functionality on the disabled interfaces after boot, first you need to clear the flag by using ifconfig(8) like: ifconfig em0 inet6 -ifdisabled If YES, the default address selection policy is set as IPv6-preferred. The default value of $ipv6_prefer is NO. 4. If your system need to receive Router Advertisement messages, define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8) scripts automatically invoke rtsol(8) when the interface becomes UP. The Router Advertisement messages are used for SLAAC (State-Less Address AutoConfiguration). 20090922: 802.11s D3.03 support was committed. This is incompatible with the previous code, which was based on D3.0. 20090912: A sysctl variable net.inet6.ip6.accept_rtadv now sets the default value of a per-interface flag ND6_IFF_ACCEPT_RTADV, not a global knob to control whether accepting Router Advertisement messages or not. Also, a per-interface flag ND6_IFF_AUTO_LINKLOCAL has been added and a sysctl variable net.inet6.ip6.auto_linklocal is its default value. The ifconfig(8) utility now supports these flags. 20090910: ZFS snapshots are now mounted with MNT_IGNORE flag. Use -v option for mount(8) and -a option for df(1) to see them. 20090825: The old tunable hw.bus.devctl_disable has been superseded by hw.bus.devctl_queue. hw.bus.devctl_disable=1 in loader.conf should be replaced by hw.bus.devctl_queue=0. The default for this new tunable is 1000. 20090813: Remove the option STOP_NMI. The default action is now to use NMI only for KDB via the newly introduced function stop_cpus_hard() and maintain stop_cpus() to just use a normal IPI_STOP on ia32 and amd64. 20090803: The stable/8 branch created in subversion. This corresponds to the RELENG_8 branch in CVS. 20090719: Bump the shared library version numbers for all libraries that do not use symbol versioning as part of the 8.0-RELEASE cycle. Bump __FreeBSD_version to 800105. 20090714: Due to changes in the implementation of virtual network stack support, all network-related kernel modules must be recompiled. As this change breaks the ABI, bump __FreeBSD_version to 800104. 20090713: The TOE interface to the TCP syncache has been modified to remove struct tcpopt () from the ABI of the network stack. The cxgb driver is the only TOE consumer affected by this change, and needs to be recompiled along with the kernel. As this change breaks the ABI, bump __FreeBSD_version to 800103. 20090712: Padding has been added to struct tcpcb, sackhint and tcpstat in to facilitate future MFCs and bug fixes whilst maintaining the ABI. However, this change breaks the ABI, so bump __FreeBSD_version to 800102. User space tools that rely on the size of any of these structs (e.g. sockstat) need to be recompiled. 20090630: The NFS_LEGACYRPC option has been removed along with the old kernel RPC implementation that this option selected. Kernel configurations may need to be adjusted. 20090629: The network interface device nodes at /dev/net/ have been removed. All ioctl operations can be performed the normal way using routing sockets. The kqueue functionality can generally be replaced with routing sockets. 20090628: The documentation from the FreeBSD Documentation Project (Handbook, FAQ, etc.) is now installed via packages by sysinstall(8) and under the /usr/local/share/doc/freebsd directory instead of /usr/share/doc. 20090624: The ABI of various structures related to the SYSV IPC API have been changed. As a result, the COMPAT_FREEBSD[456] and COMPAT_43 kernel options now all require COMPAT_FREEBSD7. Bump __FreeBSD_version to 800100. 20090622: Layout of struct vnet has changed as routing related variables were moved to their own Vimage module. Modules need to be recompiled. Bump __FreeBSD_version to 800099. 20090619: NGROUPS_MAX and NGROUPS have been increased from 16 to 1023 and 1024 respectively. As long as no more than 16 groups per process are used, no changes should be visible. When more than 16 groups are used, old binaries may fail if they call getgroups() or getgrouplist() with statically sized storage. Recompiling will work around this, but applications should be modified to use dynamically allocated storage for group arrays as POSIX.1-2008 does not cap an implementation's number of supported groups at NGROUPS_MAX+1 as previous versions did. NFS and portalfs mounts may also be affected as the list of groups is truncated to 16. Users of NFS who use more than 16 groups, should take care that negative group permissions are not used on the exported file systems as they will not be reliable unless a GSSAPI based authentication method is used. 20090616: The compiling option ADAPTIVE_LOCKMGRS has been introduced. This option compiles in the support for adaptive spinning for lockmgrs which want to enable it. The lockinit() function now accepts the flag LK_ADAPTIVE in order to make the lock object subject to adaptive spinning when both held in write and read mode. 20090613: The layout of the structure returned by IEEE80211_IOC_STA_INFO has changed. User applications that use this ioctl need to be rebuilt. 20090611: The layout of struct thread has changed. Kernel and modules need to be rebuilt. 20090608: The layout of structs ifnet, domain, protosw and vnet_net has changed. Kernel modules need to be rebuilt. Bump __FreeBSD_version to 800097. 20090602: window(1) has been removed from the base system. It can now be installed from ports. The port is called misc/window. 20090601: The way we are storing and accessing `routing table' entries has changed. Programs reading the FIB, like netstat, need to be re-compiled. 20090601: A new netisr implementation has been added for FreeBSD 8. Network file system modules, such as igmp, ipdivert, and others, should be rebuilt. Bump __FreeBSD_version to 800096. 20090530: Remove the tunable/sysctl debug.mpsafevfs as its initial purpose is no more valid. 20090530: Add VOP_ACCESSX(9). File system modules need to be rebuilt. Bump __FreeBSD_version to 800094. 20090529: Add mnt_xflag field to 'struct mount'. File system modules need to be rebuilt. Bump __FreeBSD_version to 800093. 20090528: The compiling option ADAPTIVE_SX has been retired while it has been introduced the option NO_ADAPTIVE_SX which handles the reversed logic. The KPI for sx_init_flags() changes as accepting flags: SX_ADAPTIVESPIN flag has been retired while the SX_NOADAPTIVE flag has been introduced in order to handle the reversed logic. Bump __FreeBSD_version to 800092. 20090527: Add support for hierarchical jails. Remove global securelevel. Bump __FreeBSD_version to 800091. 20090523: The layout of struct vnet_net has changed, therefore modules need to be rebuilt. Bump __FreeBSD_version to 800090. 20090523: The newly imported zic(8) produces a new format in the output. Please run tzsetup(8) to install the newly created data to /etc/localtime. 20090520: The sysctl tree for the usb stack has renamed from hw.usb2.* to hw.usb.* and is now consistent again with previous releases. 20090520: 802.11 monitor mode support was revised and driver api's were changed. Drivers dependent on net80211 now support DLT_IEEE802_11_RADIO instead of DLT_IEEE802_11. No user-visible data structures were changed but applications that use DLT_IEEE802_11 may require changes. Bump __FreeBSD_version to 800088. 20090430: The layout of the following structs has changed: sysctl_oid, socket, ifnet, inpcbinfo, tcpcb, syncache_head, vnet_inet, vnet_inet6 and vnet_ipfw. Most modules need to be rebuild or panics may be experienced. World rebuild is required for correctly checking networking state from userland. Bump __FreeBSD_version to 800085. 20090429: MLDv2 and Source-Specific Multicast (SSM) have been merged to the IPv6 stack. VIMAGE hooks are in but not yet used. The implementation of SSM within FreeBSD's IPv6 stack closely follows the IPv4 implementation. For kernel developers: * The most important changes are that the ip6_output() and ip6_input() paths no longer take the IN6_MULTI_LOCK, and this lock has been downgraded to a non-recursive mutex. * As with the changes to the IPv4 stack to support SSM, filtering of inbound multicast traffic must now be performed by transport protocols within the IPv6 stack. This does not apply to TCP and SCTP, however, it does apply to UDP in IPv6 and raw IPv6. * The KPIs used by IPv6 multicast are similar to those used by the IPv4 stack, with the following differences: * im6o_mc_filter() is analogous to imo_multicast_filter(). * The legacy KAME entry points in6_joingroup and in6_leavegroup() are shimmed to in6_mc_join() and in6_mc_leave() respectively. * IN6_LOOKUP_MULTI() has been deprecated and removed. * IPv6 relies on MLD for the DAD mechanism. KAME's internal KPIs for MLDv1 have an additional 'timer' argument which is used to jitter the initial membership report for the solicited-node multicast membership on-link. * This is not strictly needed for MLDv2, which already jitters its report transmissions. However, the 'timer' argument is preserved in case MLDv1 is active on the interface. * The KAME linked-list based IPv6 membership implementation has been refactored to use a vector similar to that used by the IPv4 stack. Code which maintains a list of its own multicast memberships internally, e.g. carp, has been updated to reflect the new semantics. * There is a known Lock Order Reversal (LOR) due to in6_setscope() acquiring the IF_AFDATA_LOCK and being called within ip6_output(). Whilst MLDv2 tries to avoid this otherwise benign LOR, it is an implementation constraint which needs to be addressed in HEAD. For application developers: * The changes are broadly similar to those made for the IPv4 stack. * The use of IPv4 and IPv6 multicast socket options on the same socket, using mapped addresses, HAS NOT been tested or supported. * There are a number of issues with the implementation of various IPv6 multicast APIs which need to be resolved in the API surface before the implementation is fully compatible with KAME userland use, and these are mostly to do with interface index treatment. * The literature available discusses the use of either the delta / ASM API with setsockopt(2)/getsockopt(2), or the full-state / ASM API using setsourcefilter(3)/getsourcefilter(3). For more information please refer to RFC 3768, 'Socket Interface Extensions for Multicast Source Filters'. * Applications which use the published RFC 3678 APIs should be fine. For systems administrators: * The mtest(8) utility has been refactored to support IPv6, in addition to IPv4. Interface addresses are no longer accepted as arguments, their names must be used instead. The utility will map the interface name to its first IPv4 address as returned by getifaddrs(3). * The ifmcstat(8) utility has also been updated to print the MLDv2 endpoint state and source filter lists via sysctl(3). * The net.inet6.ip6.mcast.loop sysctl may be tuned to 0 to disable loopback of IPv6 multicast datagrams by default; it defaults to 1 to preserve the existing behaviour. Disabling multicast loopback is recommended for optimal system performance. * The IPv6 MROUTING code has been changed to examine this sysctl instead of attempting to perform a group lookup before looping back forwarded datagrams. Bump __FreeBSD_version to 800084. 20090422: Implement low-level Bluetooth HCI API. Bump __FreeBSD_version to 800083. 20090419: The layout of struct malloc_type, used by modules to register new memory allocation types, has changed. Most modules will need to be rebuilt or panics may be experienced. Bump __FreeBSD_version to 800081. 20090415: Anticipate overflowing inp_flags - add inp_flags2. This changes most offsets in inpcb, so checking v4 connection state will require a world rebuild. Bump __FreeBSD_version to 800080. 20090415: Add an llentry to struct route and struct route_in6. Modules embedding a struct route will need to be recompiled. Bump __FreeBSD_version to 800079. 20090414: The size of rt_metrics_lite and by extension rtentry has changed. Networking administration apps will need to be recompiled. The route command now supports show as an alias for get, weighting of routes, sticky and nostick flags to alter the behavior of stateful load balancing. Bump __FreeBSD_version to 800078. 20090408: Do not use Giant for kbdmux(4) locking. This is wrong and apparently causing more problems than it solves. This will re-open the issue where interrupt handlers may race with kbdmux(4) in polling mode. Typical symptoms include (but not limited to) duplicated and/or missing characters when low level console functions (such as gets) are used while interrupts are enabled (for example geli password prompt, mountroot prompt etc.). Disabling kbdmux(4) may help. 20090407: The size of structs vnet_net, vnet_inet and vnet_ipfw has changed; kernel modules referencing any of the above need to be recompiled. Bump __FreeBSD_version to 800075. 20090320: GEOM_PART has become the default partition slicer for storage devices, replacing GEOM_MBR, GEOM_BSD, GEOM_PC98 and GEOM_GPT slicers. It introduces some changes: MSDOS/EBR: the devices created from MSDOS extended partition entries (EBR) can be named differently than with GEOM_MBR and are now symlinks to devices with offset-based names. fstabs may need to be modified. BSD: the "geometry does not match label" warning is harmless in most cases but it points to problems in file system misalignment with disk geometry. The "c" partition is now implicit, covers the whole top-level drive and cannot be (mis)used by users. General: Kernel dumps are now not allowed to be written to devices whose partition types indicate they are meant to be used for file systems (or, in case of MSDOS partitions, as something else than the "386BSD" type). Most of these changes date approximately from 200812. 20090319: The uscanner(4) driver has been removed from the kernel. This follows Linux removing theirs in 2.6 and making libusb the default interface (supported by sane). 20090319: The multicast forwarding code has been cleaned up. netstat(1) only relies on KVM now for printing bandwidth upcall meters. The IPv4 and IPv6 modules are split into ip_mroute_mod and ip6_mroute_mod respectively. The config(5) options for statically compiling this code remain the same, i.e. 'options MROUTING'. 20090315: Support for the IFF_NEEDSGIANT network interface flag has been removed, which means that non-MPSAFE network device drivers are no longer supported. In particular, if_ar, if_sr, and network device drivers from the old (legacy) USB stack can no longer be built or used. 20090313: POSIX.1 Native Language Support (NLS) has been enabled in libc and a bunch of new language catalog files have also been added. This means that some common libc messages are now localized and they depend on the LC_MESSAGES environmental variable. 20090313: The k8temp(4) driver has been renamed to amdtemp(4) since support for Family 10 and Family 11 CPU families was added. 20090309: IGMPv3 and Source-Specific Multicast (SSM) have been merged to the IPv4 stack. VIMAGE hooks are in but not yet used. For kernel developers, the most important changes are that the ip_output() and ip_input() paths no longer take the IN_MULTI_LOCK(), and this lock has been downgraded to a non-recursive mutex. Transport protocols (UDP, Raw IP) are now responsible for filtering inbound multicast traffic according to group membership and source filters. The imo_multicast_filter() KPI exists for this purpose. Transports which do not use multicast (SCTP, TCP) already reject multicast by default. Forwarding and receive performance may improve as a mutex acquisition is no longer needed in the ip_input() low-level input path. in_addmulti() and in_delmulti() are shimmed to new KPIs which exist to support SSM in-kernel. For application developers, it is recommended that loopback of multicast datagrams be disabled for best performance, as this will still cause the lock to be taken for each looped-back datagram transmission. The net.inet.ip.mcast.loop sysctl may be tuned to 0 to disable loopback by default; it defaults to 1 to preserve the existing behaviour. For systems administrators, to obtain best performance with multicast reception and multiple groups, it is always recommended that a card with a suitably precise hash filter is used. Hash collisions will still result in the lock being taken within the transport protocol input path to check group membership. If deploying FreeBSD in an environment with IGMP snooping switches, it is recommended that the net.inet.igmp.sendlocal sysctl remain enabled; this forces 224.0.0.0/24 group membership to be announced via IGMP. The size of 'struct igmpstat' has changed; netstat needs to be recompiled to reflect this. Bump __FreeBSD_version to 800070. 20090309: libusb20.so.1 is now installed as libusb.so.1 and the ports system updated to use it. This requires a buildworld/installworld in order to update the library and dependencies (usbconfig, etc). Its advisable to rebuild all ports which uses libusb. More specific directions are given in the ports collection UPDATING file. Any /etc/libmap.conf entries for libusb are no longer required and can be removed. 20090302: A workaround is committed to allow the creation of System V shared memory segment of size > 2 GB on the 64-bit architectures. Due to a limitation of the existing ABI, the shm_segsz member of the struct shmid_ds, returned by shmctl(IPC_STAT) call is wrong for large segments. Note that limits must be explicitly raised to allow such segments to be created. 20090301: The layout of struct ifnet has changed, requiring a rebuild of all network device driver modules. 20090227: The /dev handling for the new USB stack has changed, a buildworld/installworld is required for libusb20. 20090223: The new USB2 stack has now been permanently moved in and all kernel and module names reverted to their previous values (eg, usb, ehci, ohci, ums, ...). The old usb stack can be compiled in by prefixing the name with the letter 'o', the old usb modules have been removed. Updating entry 20090216 for xorg and 20090215 for libmap may still apply. 20090217: The rc.conf(5) option if_up_delay has been renamed to defaultroute_delay to better reflect its purpose. If you have customized this setting in /etc/rc.conf you need to update it to use the new name. 20090216: xorg 7.4 wants to configure its input devices via hald which does not yet work with USB2. If the keyboard/mouse does not work in xorg then add Option "AllowEmptyInput" "off" to your ServerLayout section. This will cause X to use the configured kbd and mouse sections from your xorg.conf. 20090215: The GENERIC kernels for all architectures now default to the new USB2 stack. No kernel config options or code have been removed so if a problem arises please report it and optionally revert to the old USB stack. If you are loading USB kernel modules or have a custom kernel that includes GENERIC then ensure that usb names are also changed over, eg uftdi -> usb2_serial_ftdi. Older programs linked against the ports libusb 0.1 need to be redirected to the new stack's libusb20. /etc/libmap.conf can be used for this: # Map old usb library to new one for usb2 stack libusb-0.1.so.8 libusb20.so.1 20090209: All USB ethernet devices now attach as interfaces under the name ueN (eg. ue0). This is to provide a predictable name as vendors often change usb chipsets in a product without notice. 20090203: The ichsmb(4) driver has been changed to require SMBus slave addresses be left-justified (xxxxxxx0b) rather than right-justified. All of the other SMBus controller drivers require left-justified slave addresses, so this change makes all the drivers provide the same interface. 20090201: INET6 statistics (struct ip6stat) was updated. netstat(1) needs to be recompiled. 20090119: NTFS has been removed from GENERIC kernel on amd64 to match GENERIC on i386. Should not cause any issues since mount_ntfs(8) will load ntfs.ko module automatically when NTFS support is actually needed, unless ntfs.ko is not installed or security level prohibits loading kernel modules. If either is the case, "options NTFS" has to be added into kernel config. 20090115: TCP Appropriate Byte Counting (RFC 3465) support added to kernel. New field in struct tcpcb breaks ABI, so bump __FreeBSD_version to 800061. User space tools that rely on the size of struct tcpcb in tcp_var.h (e.g. sockstat) need to be recompiled. 20081225: ng_tty(4) module updated to match the new TTY subsystem. Due to API change, user-level applications must be updated. New API support added to mpd5 CVS and expected to be present in next mpd5.3 release. 20081219: With __FreeBSD_version 800060 the makefs tool is part of the base system (it was a port). 20081216: The afdata and ifnet locks have been changed from mutexes to rwlocks, network modules will need to be re-compiled. 20081214: __FreeBSD_version 800059 incorporates the new arp-v2 rewrite. RTF_CLONING, RTF_LLINFO and RTF_WASCLONED flags are eliminated. The new code reduced struct rtentry{} by 16 bytes on 32-bit architecture and 40 bytes on 64-bit architecture. The userland applications "arp" and "ndp" have been updated accordingly. The output from "netstat -r" shows only routing entries and none of the L2 information. 20081130: __FreeBSD_version 800057 marks the switchover from the binary ath hal to source code. Users must add the line: options AH_SUPPORT_AR5416 to their kernel config files when specifying: device ath_hal The ath_hal module no longer exists; the code is now compiled together with the driver in the ath module. It is now possible to tailor chip support (i.e. reduce the set of chips and thereby the code size); consult ath_hal(4) for details. 20081121: __FreeBSD_version 800054 adds memory barriers to , new interfaces to ifnet to facilitate multiple hardware transmit queues for cards that support them, and a lock-less ring-buffer implementation to enable drivers to more efficiently manage queueing of packets. 20081117: A new version of ZFS (version 13) has been merged to -HEAD. This version has zpool attribute "listsnapshots" off by default, which means "zfs list" does not show snapshots, and is the same as Solaris behavior. 20081028: dummynet(4) ABI has changed. ipfw(8) needs to be recompiled. 20081009: The uhci, ohci, ehci and slhci USB Host controller drivers have been put into separate modules. If you load the usb module separately through loader.conf you will need to load the appropriate *hci module as well. E.g. for a UHCI-based USB 2.0 controller add the following to loader.conf: uhci_load="YES" ehci_load="YES" 20081009: The ABI used by the PMC toolset has changed. Please keep userland (libpmc(3)) and the kernel module (hwpmc(4)) in sync. 20081009: atapci kernel module now includes only generic PCI ATA driver. AHCI driver moved to ataahci kernel module. All vendor-specific code moved into separate kernel modules: ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia 20080820: The TTY subsystem of the kernel has been replaced by a new implementation, which provides better scalability and an improved driver model. Most common drivers have been migrated to the new TTY subsystem, while others have not. The following drivers have not yet been ported to the new TTY layer: PCI/ISA: cy, digi, rc, rp, sio USB: ubser, ucycom Line disciplines: ng_h4, ng_tty, ppp, sl, snp Adding these drivers to your kernel configuration file shall cause compilation to fail. 20080818: ntpd has been upgraded to 4.2.4p5. 20080801: OpenSSH has been upgraded to 5.1p1. For many years, FreeBSD's version of OpenSSH preferred DSA over RSA for host and user authentication keys. With this upgrade, we've switched to the vendor's default of RSA over DSA. This may cause upgraded clients to warn about unknown host keys even for previously known hosts. Users should follow the usual procedure for verifying host keys before accepting the RSA key. This can be circumvented by setting the "HostKeyAlgorithms" option to "ssh-dss,ssh-rsa" in ~/.ssh/config or on the ssh command line. Please note that the sequence of keys offered for authentication has been changed as well. You may want to specify IdentityFile in a different order to revert this behavior. 20080713: The sio(4) driver has been removed from the i386 and amd64 kernel configuration files. This means uart(4) is now the default serial port driver on those platforms as well. To prevent collisions with the sio(4) driver, the uart(4) driver uses different names for its device nodes. This means the onboard serial port will now most likely be called "ttyu0" instead of "ttyd0". You may need to reconfigure applications to use the new device names. When using the serial port as a boot console, be sure to update /boot/device.hints and /etc/ttys before booting the new kernel. If you forget to do so, you can still manually specify the hints at the loader prompt: set hint.uart.0.at="isa" set hint.uart.0.port="0x3F8" set hint.uart.0.flags="0x10" set hint.uart.0.irq="4" boot -s 20080609: The gpt(8) utility has been removed. Use gpart(8) to partition disks instead. 20080603: The version that Linuxulator emulates was changed from 2.4.2 to 2.6.16. If you experience any problems with Linux binaries please try to set sysctl compat.linux.osrelease to 2.4.2 and if it fixes the problem contact emulation mailing list. 20080525: ISDN4BSD (I4B) was removed from the src tree. You may need to update a your kernel configuration and remove relevant entries. 20080509: I have checked in code to support multiple routing tables. See the man pages setfib(1) and setfib(2). This is a hopefully backwards compatible version, but to make use of it you need to compile your kernel with options ROUTETABLES=2 (or more up to 16). 20080420: The 802.11 wireless support was redone to enable multi-bss operation on devices that are capable. The underlying device is no longer used directly but instead wlanX devices are cloned with ifconfig. This requires changes to rc.conf files. For example, change: ifconfig_ath0="WPA DHCP" to wlans_ath0=wlan0 ifconfig_wlan0="WPA DHCP" see rc.conf(5) for more details. In addition, mergemaster of /etc/rc.d is highly recommended. Simultaneous update of userland and kernel wouldn't hurt either. As part of the multi-bss changes the wlan_scan_ap and wlan_scan_sta modules were merged into the base wlan module. All references to these modules (e.g. in kernel config files) must be removed. 20080408: psm(4) has gained write(2) support in native operation level. Arbitrary commands can be written to /dev/psm%d and status can be read back from it. Therefore, an application is responsible for status validation and error recovery. It is a no-op in other operation levels. 20080312: Support for KSE threading has been removed from the kernel. To run legacy applications linked against KSE libmap.conf may be used. The following libmap.conf may be used to ensure compatibility with any prior release: libpthread.so.1 libthr.so.1 libpthread.so.2 libthr.so.2 libkse.so.3 libthr.so.3 20080301: The layout of struct vmspace has changed. This affects libkvm and any executables that link against libkvm and use the kvm_getprocs() function. In particular, but not exclusively, it affects ps(1), fstat(1), pkill(1), systat(1), top(1) and w(1). The effects are minimal, but it's advisable to upgrade world nonetheless. 20080229: The latest em driver no longer has support in it for the 82575 adapter, this is now moved to the igb driver. The split was done to make new features that are incompatible with older hardware easier to do. 20080220: The new geom_lvm(4) geom class has been renamed to geom_linux_lvm(4), likewise the kernel option is now GEOM_LINUX_LVM. 20080211: The default NFS mount mode has changed from UDP to TCP for increased reliability. If you rely on (insecurely) NFS mounting across a firewall you may need to update your firewall rules. 20080208: Belatedly note the addition of m_collapse for compacting mbuf chains. 20080126: The fts(3) structures have been changed to use adequate integer types for their members and so to be able to cope with huge file trees. The old fts(3) ABI is preserved through symbol versioning in libc, so third-party binaries using fts(3) should still work, although they will not take advantage of the extended types. At the same time, some third-party software might fail to build after this change due to unportable assumptions made in its source code about fts(3) structure members. Such software should be fixed by its vendor or, in the worst case, in the ports tree. FreeBSD_version 800015 marks this change for the unlikely case that a portable fix is impossible. 20080123: To upgrade to -current after this date, you must be running FreeBSD not older than 6.0-RELEASE. Upgrading to -current from 5.x now requires a stop over at RELENG_6 or RELENG_7 systems. 20071128: The ADAPTIVE_GIANT kernel option has been retired because its functionality is the default now. 20071118: The AT keyboard emulation of sunkbd(4) has been turned on by default. In order to make the special symbols of the Sun keyboards driven by sunkbd(4) work under X these now have to be configured the same way as Sun USB keyboards driven by ukbd(4) (which also does AT keyboard emulation), f.e.: Option "XkbLayout" "us" Option "XkbRules" "xorg" Option "XkbSymbols" "pc(pc105)+sun_vndr/usb(sun_usb)+us" 20071024: It has been decided that it is desirable to provide ABI backwards compatibility to the FreeBSD 4/5/6 versions of the PCIOCGETCONF, PCIOCREAD and PCIOCWRITE IOCTLs, which was broken with the introduction of PCI domain support (see the 20070930 entry). Unfortunately, this required the ABI of PCIOCGETCONF to be broken again in order to be able to provide backwards compatibility to the old version of that IOCTL. Thus consumers of PCIOCGETCONF have to be recompiled again. As for prominent ports this affects neither pciutils nor xorg-server this time, the hal port needs to be rebuilt however. 20071020: The misnamed kthread_create() and friends have been renamed to kproc_create() etc. Many of the callers already used kproc_start().. I will return kthread_create() and friends in a while with implementations that actually create threads, not procs. Renaming corresponds with version 800002. 20071010: RELENG_7 branched. COMMON ITEMS: General Notes ------------- Avoid using make -j when upgrading. While generally safe, there are sometimes problems using -j to upgrade. If your upgrade fails with -j, please try again without -j. From time to time in the past there have been problems using -j with buildworld and/or installworld. This is especially true when upgrading between "distant" versions (eg one that cross a major release boundary or several minor releases, or when several months have passed on the -current branch). Sometimes, obscure build problems are the result of environment poisoning. This can happen because the make utility reads its environment when searching for values for global variables. To run your build attempts in an "environmental clean room", prefix all make commands with 'env -i '. See the env(1) manual page for more details. When upgrading from one major version to another it is generally best to upgrade to the latest code in the currently installed branch first, then do an upgrade to the new branch. This is the best-tested upgrade path, and has the highest probability of being successful. Please try this approach before reporting problems with a major version upgrade. ZFS notes --------- When upgrading the boot ZFS pool to a new version, always follow these two steps: 1.) recompile and reinstall the ZFS boot loader and boot block (this is part of "make buildworld" and "make installworld") 2.) update the ZFS boot block on your boot drive The following example updates the ZFS boot block on the first partition (freebsd-boot) of a GPT partitioned drive ad0: "gpart bootcode -p /boot/gptzfsboot -i 1 ad0" Non-boot pools do not need these updates. To build a kernel ----------------- If you are updating from a prior version of FreeBSD (even one just a few days old), you should follow this procedure. It is the most failsafe as it uses a /usr/obj tree with a fresh mini-buildworld, make kernel-toolchain make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE To test a kernel once --------------------- If you just want to boot a kernel once (because you are not sure if it works, or if you want to boot a known bad kernel to provide debugging information) run make installkernel KERNCONF=YOUR_KERNEL_HERE KODIR=/boot/testkernel nextboot -k testkernel To just build a kernel when you know that it won't mess you up -------------------------------------------------------------- This assumes you are already running a CURRENT system. Replace ${arch} with the architecture of your machine (e.g. "i386", "arm", "amd64", "ia64", "pc98", "sparc64", "powerpc", "mips", etc). cd src/sys/${arch}/conf config KERNEL_NAME_HERE cd ../compile/KERNEL_NAME_HERE make depend make make install If this fails, go to the "To build a kernel" section. To rebuild everything and install it on the current system. ----------------------------------------------------------- # Note: sometimes if you are running current you gotta do more than # is listed here if you are upgrading from a really old current. make buildworld make kernel KERNCONF=YOUR_KERNEL_HERE [1] [3] mergemaster -p [5] make installworld mergemaster -i [4] make delete-old [6] To cross-install current onto a separate partition -------------------------------------------------- # In this approach we use a separate partition to hold # current's root, 'usr', and 'var' directories. A partition # holding "/", "/usr" and "/var" should be about 2GB in # size. make buildworld make buildkernel KERNCONF=YOUR_KERNEL_HERE make installworld DESTDIR=${CURRENT_ROOT} make distribution DESTDIR=${CURRENT_ROOT} # if newfs'd make installkernel KERNCONF=YOUR_KERNEL_HERE DESTDIR=${CURRENT_ROOT} cp /etc/fstab ${CURRENT_ROOT}/etc/fstab # if newfs'd To upgrade in-place from stable to current ---------------------------------------------- make buildworld [9] make kernel KERNCONF=YOUR_KERNEL_HERE [8] [1] [3] mergemaster -p [5] make installworld mergemaster -i [4] make delete-old [6] Make sure that you've read the UPDATING file to understand the tweaks to various things you need. At this point in the life cycle of current, things change often and you are on your own to cope. The defaults can also change, so please read ALL of the UPDATING entries. Also, if you are tracking -current, you must be subscribed to freebsd-current@freebsd.org. Make sure that before you update your sources that you have read and understood all the recent messages there. If in doubt, please track -stable which has much fewer pitfalls. [1] If you have third party modules, such as vmware, you should disable them at this point so they don't crash your system on reboot. [3] From the bootblocks, boot -s, and then do fsck -p mount -u / mount -a cd src adjkerntz -i # if CMOS is wall time Also, when doing a major release upgrade, it is required that you boot into single user mode to do the installworld. [4] Note: This step is non-optional. Failure to do this step can result in a significant reduction in the functionality of the system. Attempting to do it by hand is not recommended and those that pursue this avenue should read this file carefully, as well as the archives of freebsd-current and freebsd-hackers mailing lists for potential gotchas. The -U option is also useful to consider. See mergemaster(8) for more information. [5] Usually this step is a noop. However, from time to time you may need to do this if you get unknown user in the following step. It never hurts to do it all the time. You may need to install a new mergemaster (cd src/usr.sbin/mergemaster && make install) after the buildworld before this step if you last updated from current before 20020224 or from -stable before 20020408. [6] This only deletes old files and directories. Old libraries can be deleted by "make delete-old-libs", but you have to make sure that no program is using those libraries anymore. [8] In order to have a kernel that can run the 4.x binaries needed to do an installworld, you must include the COMPAT_FREEBSD4 option in your kernel. Failure to do so may leave you with a system that is hard to boot to recover. A similar kernel option COMPAT_FREEBSD5 is required to run the 5.x binaries on more recent kernels. And so on for COMPAT_FREEBSD6 and COMPAT_FREEBSD7. Make sure that you merge any new devices from GENERIC since the last time you updated your kernel config file. [9] When checking out sources, you must include the -P flag to have cvs prune empty directories. If CPUTYPE is defined in your /etc/make.conf, make sure to use the "?=" instead of the "=" assignment operator, so that buildworld can override the CPUTYPE if it needs to. MAKEOBJDIRPREFIX must be defined in an environment variable, and not on the command line, or in /etc/make.conf. buildworld will warn if it is improperly defined. FORMAT: This file contains a list, in reverse chronological order, of major breakages in tracking -current. It is not guaranteed to be a complete list of such breakages, and only contains entries since October 10, 2007. If you need to see UPDATING entries from before that date, you will need to fetch an UPDATING file from an older FreeBSD release. Copyright information: Copyright 1998-2009 M. Warner Losh. All Rights Reserved. Redistribution, publication, translation and use, with or without modification, in full or in part, in any form or format of this document are permitted without further permission from the author. THIS DOCUMENT IS PROVIDED BY WARNER LOSH ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Contact Warner Losh if you have any questions about your use of this document. $FreeBSD$ Index: head/share/mk/bsd.own.mk =================================================================== --- head/share/mk/bsd.own.mk (revision 242623) +++ head/share/mk/bsd.own.mk (revision 242624) @@ -1,688 +1,693 @@ # $FreeBSD$ # # The include file set common variables for owner, # group, mode, and directories. Defaults are in brackets. # # # +++ variables +++ # # DESTDIR Change the tree where the file gets installed. [not set] # # DISTDIR Change the tree where the file for a distribution # gets installed (see /usr/src/release/Makefile). [not set] # # COMPRESS_CMD Program to compress documents. # Output is to stdout. [gzip -cn] # # COMPRESS_EXT File name extension of ${COMPRESS_CMD} command. [.gz] # # BINOWN Binary owner. [root] # # BINGRP Binary group. [wheel] # # BINMODE Binary mode. [555] # # NOBINMODE Mode for non-executable files. [444] # # LIBDIR Base path for libraries. [/usr/lib] # # LIBCOMPATDIR Base path for compat libraries. [/usr/lib/compat] # # LIBDATADIR Base path for misc. utility data files. [/usr/libdata] # # LIBEXECDIR Base path for system daemons and utilities. [/usr/libexec] # # LINTLIBDIR Base path for lint libraries. [/usr/libdata/lint] # # SHLIBDIR Base path for shared libraries. [${LIBDIR}] # # LIBOWN Library owner. [${BINOWN}] # # LIBGRP Library group. [${BINGRP}] # # LIBMODE Library mode. [${NOBINMODE}] # # # KMODDIR Base path for loadable kernel modules # (see kld(4)). [/boot/kernel] # # KMODOWN Kernel and KLD owner. [${BINOWN}] # # KMODGRP Kernel and KLD group. [${BINGRP}] # # KMODMODE KLD mode. [${BINMODE}] # # # SHAREDIR Base path for architecture-independent ascii # text files. [/usr/share] # # SHAREOWN ASCII text file owner. [root] # # SHAREGRP ASCII text file group. [wheel] # # SHAREMODE ASCII text file mode. [${NOBINMODE}] # # # CONFDIR Base path for configuration files. [/etc] # # CONFOWN Configuration file owner. [root] # # CONFGRP Configuration file group. [wheel] # # CONFMODE Configuration file mode. [644] # # # DOCDIR Base path for system documentation (e.g. PSD, USD, # handbook, FAQ etc.). [${SHAREDIR}/doc] # # DOCOWN Documentation owner. [${SHAREOWN}] # # DOCGRP Documentation group. [${SHAREGRP}] # # DOCMODE Documentation mode. [${NOBINMODE}] # # # INFODIR Base path for GNU's hypertext system # called Info (see info(1)). [${SHAREDIR}/info] # # INFOOWN Info owner. [${SHAREOWN}] # # INFOGRP Info group. [${SHAREGRP}] # # INFOMODE Info mode. [${NOBINMODE}] # # # MANDIR Base path for manual installation. [${SHAREDIR}/man/man] # # MANOWN Manual owner. [${SHAREOWN}] # # MANGRP Manual group. [${SHAREGRP}] # # MANMODE Manual mode. [${NOBINMODE}] # # # NLSDIR Base path for National Language Support files # installation. [${SHAREDIR}/nls] # # NLSOWN National Language Support files owner. [${SHAREOWN}] # # NLSGRP National Language Support files group. [${SHAREGRP}] # # NLSMODE National Language Support files mode. [${NOBINMODE}] # # INCLUDEDIR Base path for standard C include files [/usr/include] .if !target(____) ____: .if !defined(_WITHOUT_SRCCONF) SRCCONF?= /etc/src.conf .if exists(${SRCCONF}) .include "${SRCCONF}" .endif .endif # Binaries BINOWN?= root BINGRP?= wheel BINMODE?= 555 NOBINMODE?= 444 .if defined(MODULES_WITH_WORLD) KMODDIR?= /boot/modules .else KMODDIR?= /boot/kernel .endif KMODOWN?= ${BINOWN} KMODGRP?= ${BINGRP} KMODMODE?= ${BINMODE} LIBDIR?= /usr/lib LIBCOMPATDIR?= /usr/lib/compat LIBDATADIR?= /usr/libdata LIBEXECDIR?= /usr/libexec LINTLIBDIR?= /usr/libdata/lint SHLIBDIR?= ${LIBDIR} LIBOWN?= ${BINOWN} LIBGRP?= ${BINGRP} LIBMODE?= ${NOBINMODE} # Share files SHAREDIR?= /usr/share SHAREOWN?= root SHAREGRP?= wheel SHAREMODE?= ${NOBINMODE} CONFDIR?= /etc CONFOWN?= root CONFGRP?= wheel CONFMODE?= 644 MANDIR?= ${SHAREDIR}/man/man MANOWN?= ${SHAREOWN} MANGRP?= ${SHAREGRP} MANMODE?= ${NOBINMODE} DOCDIR?= ${SHAREDIR}/doc DOCOWN?= ${SHAREOWN} DOCGRP?= ${SHAREGRP} DOCMODE?= ${NOBINMODE} INFODIR?= ${SHAREDIR}/info INFOOWN?= ${SHAREOWN} INFOGRP?= ${SHAREGRP} INFOMODE?= ${NOBINMODE} NLSDIR?= ${SHAREDIR}/nls NLSOWN?= ${SHAREOWN} NLSGRP?= ${SHAREGRP} NLSMODE?= ${NOBINMODE} INCLUDEDIR?= /usr/include # Common variables .if !defined(DEBUG_FLAGS) STRIP?= -s .endif COMPRESS_CMD?= gzip -cn COMPRESS_EXT?= .gz .if !defined(_WITHOUT_SRCCONF) # # Define MK_* variables (which are either "yes" or "no") for users # to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the # make(1) environment. # These should be tested with `== "no"' or `!= "no"' in makefiles. # The NO_* variables should only be set by makefiles. # # # Supported NO_* options (if defined, MK_* will be forced to "no", # regardless of user's setting). # .for var in \ CTF \ INSTALLLIB \ MAN \ PROFILE .if defined(NO_${var}) .if defined(WITH_${var}) .undef WITH_${var} .endif WITHOUT_${var}= .endif .endfor # # Compat NO_* options (same as above, except their use is deprecated). # .if !defined(BURN_BRIDGES) .for var in \ ACPI \ ATM \ AUDIT \ AUTHPF \ BIND \ BIND_DNSSEC \ BIND_ETC \ BIND_LIBS_LWRES \ BIND_MTREE \ BIND_NAMED \ BIND_UTILS \ BLUETOOTH \ BOOT \ CALENDAR \ CPP \ CRYPT \ CVS \ CXX \ DICT \ DYNAMICROOT \ EXAMPLES \ FORTH \ FP_LIBC \ GAMES \ GCOV \ GDB \ GNU \ GPIB \ GROFF \ HTML \ INET6 \ INFO \ IPFILTER \ IPX \ KDUMP \ KERBEROS \ LIB32 \ LIBPTHREAD \ LIBTHR \ LOCALES \ LPR \ MAILWRAPPER \ NETCAT \ NIS \ NLS \ NLS_CATALOGS \ NS_CACHING \ OPENSSH \ OPENSSL \ PAM \ PF \ RCMDS \ RCS \ RESCUE \ SENDMAIL \ SETUID_LOGIN \ SHAREDOCS \ SYSCONS \ TCSH \ TOOLCHAIN \ USB \ WPA_SUPPLICANT_EAPOL .if defined(NO_${var}) #.warning NO_${var} is deprecated in favour of WITHOUT_${var}= WITHOUT_${var}= .endif .endfor .endif # !defined(BURN_BRIDGES) # # Older-style variables that enabled behaviour when set. # .if defined(YES_HESIOD) WITH_HESIOD= .endif .if defined(MAKE_IDEA) WITH_IDEA= .endif __DEFAULT_YES_OPTIONS = \ ACCT \ ACPI \ AMD \ APM \ ASSERT_DEBUG \ AT \ ATF \ ATM \ AUDIT \ AUTHPF \ BIND \ BIND_DNSSEC \ BIND_ETC \ BIND_LIBS_LWRES \ BIND_MTREE \ BIND_NAMED \ BIND_UTILS \ BINUTILS \ BLUETOOTH \ BOOT \ BSD_CPIO \ BSNMP \ SOURCELESS \ SOURCELESS_HOST \ SOURCELESS_UCODE \ BZIP2 \ CALENDAR \ CAPSICUM \ CDDL \ CPP \ CRYPT \ CTM \ CVS \ CXX \ DICT \ DYNAMICROOT \ ED_CRYPTO \ EXAMPLES \ FLOPPY \ FORTH \ FP_LIBC \ FREEBSD_UPDATE \ GAMES \ GCC \ GCOV \ GDB \ GNU \ GPIB \ GPIO \ GROFF \ HTML \ INET \ INET6 \ INFO \ INSTALLLIB \ IPFILTER \ IPFW \ IPX \ JAIL \ KDUMP \ KERBEROS \ KERNEL_SYMBOLS \ KVM \ LEGACY_CONSOLE \ LIB32 \ LIBPTHREAD \ LIBTHR \ LOCALES \ LOCATE \ LPR \ LS_COLORS \ MAIL \ MAILWRAPPER \ MAKE \ MAN \ NDIS \ NETCAT \ NETGRAPH \ NIS \ NLS \ NLS_CATALOGS \ NS_CACHING \ NTP \ OPENSSH \ OPENSSL \ PAM \ PF \ PKGBOOTSTRAP \ PKGTOOLS \ PMC \ PORTSNAP \ PPP \ PROFILE \ QUOTAS \ RCMDS \ RCS \ RESCUE \ ROUTED \ SENDMAIL \ SETUID_LOGIN \ SHAREDOCS \ SSP \ SYSINSTALL \ SYMVER \ SYSCONS \ TCSH \ TELNET \ TEXTPROC \ TOOLCHAIN \ USB \ UTMPX \ WIRELESS \ WPA_SUPPLICANT_EAPOL \ ZFS \ ZONEINFO __DEFAULT_NO_OPTIONS = \ BMAKE \ BSD_GREP \ BIND_IDN \ BIND_LARGE_FILE \ BIND_LIBS \ BIND_SIGCHASE \ BIND_XML \ BSDCONFIG \ CLANG_EXTRAS \ - CLANG_IS_CC \ CTF \ HESIOD \ ICONV \ IDEA \ INSTALL_AS_USER \ NAND \ OFED \ SHARED_TOOLCHAIN # # Default behaviour of some options depends on the architecture. Unfortunately # this means that we have to test TARGET_ARCH (the buildworld case) as well # as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not # used at all in bsd.*.mk, but we have to make an exception here if we want # to allow defaults for some things like clang and fdt to vary by target # architecture. # .if defined(TARGET_ARCH) __T=${TARGET_ARCH} .else __T=${MACHINE_ARCH} .endif # Clang is only for x86 and powerpc right now, by default. .if ${__T} == "amd64" || ${__T} == "i386" || ${__T:Mpowerpc*} __DEFAULT_YES_OPTIONS+=CLANG .else __DEFAULT_NO_OPTIONS+=CLANG +.endif +# Clang the default system compiler only on x86. +.if ${__T} == "amd64" || ${__T} == "i386" +__DEFAULT_YES_OPTIONS+=CLANG_IS_CC +.else +__DEFAULT_NO_OPTIONS+=CLANG_IS_CC .endif # FDT is needed only for arm, mips and powerpc .if ${__T:Marm*} || ${__T:Mpowerpc*} || ${__T:Mmips*} __DEFAULT_YES_OPTIONS+=FDT .else __DEFAULT_NO_OPTIONS+=FDT .endif .undef __T # # MK_* options which default to "yes". # .for var in ${__DEFAULT_YES_OPTIONS} .if defined(WITH_${var}) && defined(WITHOUT_${var}) .error WITH_${var} and WITHOUT_${var} can't both be set. .endif .if defined(MK_${var}) .error MK_${var} can't be set by a user. .endif .if defined(WITHOUT_${var}) MK_${var}:= no .else MK_${var}:= yes .endif .endfor .undef __DEFAULT_YES_OPTIONS # # MK_* options which default to "no". # .for var in ${__DEFAULT_NO_OPTIONS} .if defined(WITH_${var}) && defined(WITHOUT_${var}) .error WITH_${var} and WITHOUT_${var} can't both be set. .endif .if defined(MK_${var}) .error MK_${var} can't be set by a user. .endif .if defined(WITH_${var}) MK_${var}:= yes .else MK_${var}:= no .endif .endfor .undef __DEFAULT_NO_OPTIONS # # Force some options off if their dependencies are off. # Order is somewhat important. # .if ${MK_LIBPTHREAD} == "no" MK_LIBTHR:= no .endif .if ${MK_LIBTHR} == "no" MK_BIND:= no .endif .if ${MK_BIND} == "no" MK_BIND_DNSSEC:= no MK_BIND_ETC:= no MK_BIND_LIBS:= no MK_BIND_LIBS_LWRES:= no MK_BIND_MTREE:= no MK_BIND_NAMED:= no MK_BIND_UTILS:= no .endif .if ${MK_BIND_MTREE} == "no" MK_BIND_ETC:= no .endif .if ${MK_SOURCELESS} == "no" MK_SOURCELESS_HOST:= no MK_SOURCELESS_UCODE:= no .endif .if ${MK_CDDL} == "no" MK_ZFS:= no MK_CTF:= no .endif .if ${MK_CLANG} == "no" MK_CLANG_EXTRAS:= no .endif .if ${MK_CRYPT} == "no" MK_OPENSSL:= no MK_OPENSSH:= no MK_KERBEROS:= no .endif .if ${MK_CXX} == "no" MK_CLANG:= no MK_GROFF:= no .endif .if ${MK_MAIL} == "no" MK_MAILWRAPPER:= no MK_SENDMAIL:= no .endif .if ${MK_NETGRAPH} == "no" MK_ATM:= no MK_BLUETOOTH:= no .endif .if ${MK_OPENSSL} == "no" MK_OPENSSH:= no MK_KERBEROS:= no .endif .if ${MK_PF} == "no" MK_AUTHPF:= no .endif .if ${MK_TEXTPROC} == "no" MK_GROFF:= no .endif .if ${MK_TOOLCHAIN} == "no" MK_BINUTILS:= no MK_CLANG:= no MK_GCC:= no MK_GDB:= no .endif .if ${MK_CLANG} == "no" MK_CLANG_IS_CC:= no .endif # # Set defaults for the MK_*_SUPPORT variables. # # # MK_*_SUPPORT options which default to "yes" unless their corresponding # MK_* variable is set to "no". # .for var in \ BZIP2 \ GNU \ INET \ INET6 \ IPX \ KERBEROS \ KVM \ NETGRAPH \ PAM \ WIRELESS .if defined(WITH_${var}_SUPPORT) && defined(WITHOUT_${var}_SUPPORT) .error WITH_${var}_SUPPORT and WITHOUT_${var}_SUPPORT can't both be set. .endif .if defined(MK_${var}_SUPPORT) .error MK_${var}_SUPPORT can't be set by a user. .endif .if defined(WITHOUT_${var}_SUPPORT) || ${MK_${var}} == "no" MK_${var}_SUPPORT:= no .else MK_${var}_SUPPORT:= yes .endif .endfor # # MK_* options whose default value depends on another option. # .for vv in \ GSSAPI/KERBEROS \ MAN_UTILS/MAN .if defined(WITH_${vv:H}) && defined(WITHOUT_${vv:H}) .error WITH_${vv:H} and WITHOUT_${vv:H} can't both be set. .endif .if defined(MK_${vv:H}) .error MK_${vv:H} can't be set by a user. .endif .if defined(WITH_${vv:H}) MK_${vv:H}:= yes .elif defined(WITHOUT_${vv:H}) MK_${vv:H}:= no .else MK_${vv:H}:= ${MK_${vv:T}} .endif .endfor # # MK_* options that default to "yes" if the compiler is a C++11 compiler. # .include .for var in \ LIBCPLUSPLUS .if defined(WITH_${var}) && defined(WITHOUT_${var}) .error WITH_${var} and WITHOUT_${var} can't both be set. .endif .if defined(MK_${var}) .error MK_${var} can't be set by a user. .endif .if ${COMPILER_FEATURES:Mc++11} .if defined(WITHOUT_${var}) MK_${var}:= no .else MK_${var}:= yes .endif .else .if defined(WITH_${var}) MK_${var}:= yes .else MK_${var}:= no .endif .endif .endfor .if ${MK_CTF} != "no" CTFCONVERT_CMD= ${CTFCONVERT} ${CTFFLAGS} ${.TARGET} .elif defined(MAKE_VERSION) && ${MAKE_VERSION} >= 5201111300 CTFCONVERT_CMD= .else CTFCONVERT_CMD= @: .endif .if ${MK_INSTALL_AS_USER} != "no" _uid!= id -un .if ${_uid} != 0 _gid!= id -gn .for x in BIN CONF DOC INFO KMOD LIB MAN NLS SHARE $xOWN= ${_uid} $xGRP= ${_gid} .endfor .endif .endif .endif # !_WITHOUT_SRCCONF .endif # !target(____) Index: head/sys/sys/param.h =================================================================== --- head/sys/sys/param.h (revision 242623) +++ head/sys/sys/param.h (revision 242624) @@ -1,346 +1,346 @@ /*- * Copyright (c) 1982, 1986, 1989, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)param.h 8.3 (Berkeley) 4/4/95 * $FreeBSD$ */ #ifndef _SYS_PARAM_H_ #define _SYS_PARAM_H_ #include #define BSD 199506 /* System version (year & month). */ #define BSD4_3 1 #define BSD4_4 1 /* * __FreeBSD_version numbers are documented in the Porter's Handbook. * If you bump the version for any reason, you should update the documentation * there. * Currently this lives here: * * doc/en_US.ISO8859-1/books/porters-handbook/book.sgml * * scheme is: Rxx * 'R' is in the range 0 to 4 if this is a release branch or * x.0-CURRENT before RELENG_*_0 is created, otherwise 'R' is * in the range 5 to 9. */ #undef __FreeBSD_version -#define __FreeBSD_version 1000023 /* Master, propagated to newvers */ +#define __FreeBSD_version 1000024 /* Master, propagated to newvers */ /* * __FreeBSD_kernel__ indicates that this system uses the kernel of FreeBSD, * which by definition is always true on FreeBSD. This macro is also defined * on other systems that use the kernel of FreeBSD, such as GNU/kFreeBSD. * * It is tempting to use this macro in userland code when we want to enable * kernel-specific routines, and in fact it's fine to do this in code that * is part of FreeBSD itself. However, be aware that as presence of this * macro is still not widespread (e.g. older FreeBSD versions, 3rd party * compilers, etc), it is STRONGLY DISCOURAGED to check for this macro in * external applications without also checking for __FreeBSD__ as an * alternative. */ #undef __FreeBSD_kernel__ #define __FreeBSD_kernel__ #ifdef _KERNEL #define P_OSREL_SIGWAIT 700000 #define P_OSREL_SIGSEGV 700004 #define P_OSREL_MAP_ANON 800104 #endif #ifndef LOCORE #include #endif /* * Machine-independent constants (some used in following include files). * Redefined constants are from POSIX 1003.1 limits file. * * MAXCOMLEN should be >= sizeof(ac_comm) (see ) */ #include #define MAXCOMLEN 19 /* max command name remembered */ #define MAXINTERP PATH_MAX /* max interpreter file name length */ #define MAXLOGNAME 17 /* max login name length (incl. NUL) */ #define MAXUPRC CHILD_MAX /* max simultaneous processes */ #define NCARGS ARG_MAX /* max bytes for an exec function */ #define NGROUPS (NGROUPS_MAX+1) /* max number groups */ #define NOFILE OPEN_MAX /* max open files per process */ #define NOGROUP 65535 /* marker for empty group set member */ #define MAXHOSTNAMELEN 256 /* max hostname size */ #define SPECNAMELEN 63 /* max length of devicename */ /* More types and definitions used throughout the kernel. */ #ifdef _KERNEL #include #include #ifndef LOCORE #include #include #endif #ifndef FALSE #define FALSE 0 #endif #ifndef TRUE #define TRUE 1 #endif #endif #ifndef _KERNEL /* Signals. */ #include #endif /* Machine type dependent parameters. */ #include #ifndef _KERNEL #include #endif #ifndef DEV_BSHIFT #define DEV_BSHIFT 9 /* log2(DEV_BSIZE) */ #endif #define DEV_BSIZE (1<>PAGE_SHIFT) #endif /* * btodb() is messy and perhaps slow because `bytes' may be an off_t. We * want to shift an unsigned type to avoid sign extension and we don't * want to widen `bytes' unnecessarily. Assume that the result fits in * a daddr_t. */ #ifndef btodb #define btodb(bytes) /* calculates (bytes / DEV_BSIZE) */ \ (sizeof (bytes) > sizeof(long) \ ? (daddr_t)((unsigned long long)(bytes) >> DEV_BSHIFT) \ : (daddr_t)((unsigned long)(bytes) >> DEV_BSHIFT)) #endif #ifndef dbtob #define dbtob(db) /* calculates (db * DEV_BSIZE) */ \ ((off_t)(db) << DEV_BSHIFT) #endif #define PRIMASK 0x0ff #define PCATCH 0x100 /* OR'd with pri for tsleep to check signals */ #define PDROP 0x200 /* OR'd with pri to stop re-entry of interlock mutex */ #define PBDRY 0x400 /* for PCATCH stop is done on the user boundary */ #define NZERO 0 /* default "nice" */ #define NBBY 8 /* number of bits in a byte */ #define NBPW sizeof(int) /* number of bytes per word (integer) */ #define CMASK 022 /* default file mask: S_IWGRP|S_IWOTH */ #define NODEV (dev_t)(-1) /* non-existent device */ /* * File system parameters and macros. * * MAXBSIZE - Filesystems are made out of blocks of at most MAXBSIZE bytes * per block. MAXBSIZE may be made larger without effecting * any existing filesystems as long as it does not exceed MAXPHYS, * and may be made smaller at the risk of not being able to use * filesystems which require a block size exceeding MAXBSIZE. * * BKVASIZE - Nominal buffer space per buffer, in bytes. BKVASIZE is the * minimum KVM memory reservation the kernel is willing to make. * Filesystems can of course request smaller chunks. Actual * backing memory uses a chunk size of a page (PAGE_SIZE). * * If you make BKVASIZE too small you risk seriously fragmenting * the buffer KVM map which may slow things down a bit. If you * make it too big the kernel will not be able to optimally use * the KVM memory reserved for the buffer cache and will wind * up with too-few buffers. * * The default is 16384, roughly 2x the block size used by a * normal UFS filesystem. */ #define MAXBSIZE 65536 /* must be power of 2 */ #define BKVASIZE 16384 /* must be power of 2 */ #define BKVAMASK (BKVASIZE-1) /* * MAXPATHLEN defines the longest permissible path length after expanding * symbolic links. It is used to allocate a temporary buffer from the buffer * pool in which to do the name expansion, hence should be a power of two, * and must be less than or equal to MAXBSIZE. MAXSYMLINKS defines the * maximum number of symbolic links that may be expanded in a path name. * It should be set high enough to allow all legitimate uses, but halt * infinite loops reasonably quickly. */ #define MAXPATHLEN PATH_MAX #define MAXSYMLINKS 32 /* Bit map related macros. */ #define setbit(a,i) (((unsigned char *)(a))[(i)/NBBY] |= 1<<((i)%NBBY)) #define clrbit(a,i) (((unsigned char *)(a))[(i)/NBBY] &= ~(1<<((i)%NBBY))) #define isset(a,i) \ (((const unsigned char *)(a))[(i)/NBBY] & (1<<((i)%NBBY))) #define isclr(a,i) \ ((((const unsigned char *)(a))[(i)/NBBY] & (1<<((i)%NBBY))) == 0) /* Macros for counting and rounding. */ #ifndef howmany #define howmany(x, y) (((x)+((y)-1))/(y)) #endif #define nitems(x) (sizeof((x)) / sizeof((x)[0])) #define rounddown(x, y) (((x)/(y))*(y)) #define rounddown2(x, y) ((x)&(~((y)-1))) /* if y is power of two */ #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */ #define roundup2(x, y) (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */ #define powerof2(x) ((((x)-1)&(x))==0) /* Macros for min/max. */ #define MIN(a,b) (((a)<(b))?(a):(b)) #define MAX(a,b) (((a)>(b))?(a):(b)) #ifdef _KERNEL /* * Basic byte order function prototypes for non-inline functions. */ #ifndef LOCORE #ifndef _BYTEORDER_PROTOTYPED #define _BYTEORDER_PROTOTYPED __BEGIN_DECLS __uint32_t htonl(__uint32_t); __uint16_t htons(__uint16_t); __uint32_t ntohl(__uint32_t); __uint16_t ntohs(__uint16_t); __END_DECLS #endif #endif #ifndef lint #ifndef _BYTEORDER_FUNC_DEFINED #define _BYTEORDER_FUNC_DEFINED #define htonl(x) __htonl(x) #define htons(x) __htons(x) #define ntohl(x) __ntohl(x) #define ntohs(x) __ntohs(x) #endif /* !_BYTEORDER_FUNC_DEFINED */ #endif /* lint */ #endif /* _KERNEL */ /* * Scale factor for scaled integers used to count %cpu time and load avgs. * * The number of CPU `tick's that map to a unique `%age' can be expressed * by the formula (1 / (2 ^ (FSHIFT - 11))). The maximum load average that * can be calculated (assuming 32 bits) can be closely approximated using * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15). * * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age', * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024. */ #define FSHIFT 11 /* bits to right of fixed binary point */ #define FSCALE (1<> (PAGE_SHIFT - DEV_BSHIFT)) #define ctodb(db) /* calculates pages to devblks */ \ ((db) << (PAGE_SHIFT - DEV_BSHIFT)) /* * Old spelling of __containerof(). */ #define member2struct(s, m, x) \ ((struct s *)(void *)((char *)(x) - offsetof(struct s, m))) /* * Access a variable length array that has been declared as a fixed * length array. */ #define __PAST_END(array, offset) (((__typeof__(*(array)) *)(array))[offset]) #endif /* _SYS_PARAM_H_ */