Index: user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ah.h =================================================================== --- user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ah.h (revision 225571) +++ user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ah.h (revision 225572) @@ -1,1137 +1,1140 @@ /* * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD$ */ #ifndef _ATH_AH_H_ #define _ATH_AH_H_ /* * Atheros Hardware Access Layer * * Clients of the HAL call ath_hal_attach to obtain a reference to an ath_hal * structure for use with the device. Hardware-related operations that * follow must call back into the HAL through interface, supplying the * reference as the first parameter. */ #include "ah_osdep.h" /* * The maximum number of TX/RX chains supported. * This is intended to be used by various statistics gathering operations * (NF, RSSI, EVM). */ #define AH_MIMO_MAX_CHAINS 3 #define AH_MIMO_MAX_EVM_PILOTS 6 /* * __ahdecl is analogous to _cdecl; it defines the calling * convention used within the HAL. For most systems this * can just default to be empty and the compiler will (should) * use _cdecl. For systems where _cdecl is not compatible this * must be defined. See linux/ah_osdep.h for an example. */ #ifndef __ahdecl #define __ahdecl #endif /* * Status codes that may be returned by the HAL. Note that * interfaces that return a status code set it only when an * error occurs--i.e. you cannot check it for success. */ typedef enum { HAL_OK = 0, /* No error */ HAL_ENXIO = 1, /* No hardware present */ HAL_ENOMEM = 2, /* Memory allocation failed */ HAL_EIO = 3, /* Hardware didn't respond as expected */ HAL_EEMAGIC = 4, /* EEPROM magic number invalid */ HAL_EEVERSION = 5, /* EEPROM version invalid */ HAL_EELOCKED = 6, /* EEPROM unreadable */ HAL_EEBADSUM = 7, /* EEPROM checksum invalid */ HAL_EEREAD = 8, /* EEPROM read problem */ HAL_EEBADMAC = 9, /* EEPROM mac address invalid */ HAL_EESIZE = 10, /* EEPROM size not supported */ HAL_EEWRITE = 11, /* Attempt to change write-locked EEPROM */ HAL_EINVAL = 12, /* Invalid parameter to function */ HAL_ENOTSUPP = 13, /* Hardware revision not supported */ HAL_ESELFTEST = 14, /* Hardware self-test failed */ HAL_EINPROGRESS = 15, /* Operation incomplete */ HAL_EEBADREG = 16, /* EEPROM invalid regulatory contents */ HAL_EEBADCC = 17, /* EEPROM invalid country code */ } HAL_STATUS; typedef enum { AH_FALSE = 0, /* NB: lots of code assumes false is zero */ AH_TRUE = 1, } HAL_BOOL; typedef enum { HAL_CAP_REG_DMN = 0, /* current regulatory domain */ HAL_CAP_CIPHER = 1, /* hardware supports cipher */ HAL_CAP_TKIP_MIC = 2, /* handle TKIP MIC in hardware */ HAL_CAP_TKIP_SPLIT = 3, /* hardware TKIP uses split keys */ HAL_CAP_PHYCOUNTERS = 4, /* hardware PHY error counters */ HAL_CAP_DIVERSITY = 5, /* hardware supports fast diversity */ HAL_CAP_KEYCACHE_SIZE = 6, /* number of entries in key cache */ HAL_CAP_NUM_TXQUEUES = 7, /* number of hardware xmit queues */ HAL_CAP_VEOL = 9, /* hardware supports virtual EOL */ HAL_CAP_PSPOLL = 10, /* hardware has working PS-Poll support */ HAL_CAP_DIAG = 11, /* hardware diagnostic support */ HAL_CAP_COMPRESSION = 12, /* hardware supports compression */ HAL_CAP_BURST = 13, /* hardware supports packet bursting */ HAL_CAP_FASTFRAME = 14, /* hardware supoprts fast frames */ HAL_CAP_TXPOW = 15, /* global tx power limit */ HAL_CAP_TPC = 16, /* per-packet tx power control */ HAL_CAP_PHYDIAG = 17, /* hardware phy error diagnostic */ HAL_CAP_BSSIDMASK = 18, /* hardware supports bssid mask */ HAL_CAP_MCAST_KEYSRCH = 19, /* hardware has multicast key search */ HAL_CAP_TSF_ADJUST = 20, /* hardware has beacon tsf adjust */ /* 21 was HAL_CAP_XR */ HAL_CAP_WME_TKIPMIC = 22, /* hardware can support TKIP MIC when WMM is turned on */ /* 23 was HAL_CAP_CHAN_HALFRATE */ /* 24 was HAL_CAP_CHAN_QUARTERRATE */ HAL_CAP_RFSILENT = 25, /* hardware has rfsilent support */ HAL_CAP_TPC_ACK = 26, /* ack txpower with per-packet tpc */ HAL_CAP_TPC_CTS = 27, /* cts txpower with per-packet tpc */ HAL_CAP_11D = 28, /* 11d beacon support for changing cc */ HAL_CAP_HT = 30, /* hardware can support HT */ HAL_CAP_GTXTO = 31, /* hardware supports global tx timeout */ HAL_CAP_FAST_CC = 32, /* hardware supports fast channel change */ HAL_CAP_TX_CHAINMASK = 33, /* mask of TX chains supported */ HAL_CAP_RX_CHAINMASK = 34, /* mask of RX chains supported */ HAL_CAP_NUM_GPIO_PINS = 36, /* number of GPIO pins */ HAL_CAP_CST = 38, /* hardware supports carrier sense timeout */ HAL_CAP_RTS_AGGR_LIMIT = 42, /* aggregation limit with RTS */ HAL_CAP_4ADDR_AGGR = 43, /* hardware is capable of 4addr aggregation */ HAL_CAP_DFS_DMN = 44, /* current DFS domain */ HAL_CAP_EXT_CHAN_DFS = 45, /* DFS support for extension channel */ HAL_CAP_COMBINED_RADAR_RSSI = 46, /* Is combined RSSI for radar accurate */ HAL_CAP_AUTO_SLEEP = 48, /* hardware can go to network sleep automatically after waking up to receive TIM */ HAL_CAP_MBSSID_AGGR_SUPPORT = 49, /* Support for mBSSID Aggregation */ HAL_CAP_SPLIT_4KB_TRANS = 50, /* hardware supports descriptors straddling a 4k page boundary */ HAL_CAP_REG_FLAG = 51, /* Regulatory domain flags */ HAL_CAP_BT_COEX = 60, /* hardware is capable of bluetooth coexistence */ HAL_CAP_HT20_SGI = 96, /* hardware supports HT20 short GI */ HAL_CAP_RXTSTAMP_PREC = 100, /* rx desc tstamp precision (bits) */ HAL_CAP_ENHANCED_DFS_SUPPORT = 117, /* hardware supports enhanced DFS */ /* The following are private to the FreeBSD HAL (224 onward) */ HAL_CAP_INTMIT = 229, /* interference mitigation */ HAL_CAP_RXORN_FATAL = 230, /* HAL_INT_RXORN treated as fatal */ HAL_CAP_BB_HANG = 235, /* can baseband hang */ HAL_CAP_MAC_HANG = 236, /* can MAC hang */ HAL_CAP_INTRMASK = 237, /* bitmask of supported interrupts */ HAL_CAP_BSSIDMATCH = 238, /* hardware has disable bssid match */ HAL_CAP_STREAMS = 239, /* how many 802.11n spatial streams are available */ HAL_CAP_RXDESC_SELFLINK = 242, /* support a self-linked tail RX descriptor */ } HAL_CAPABILITY_TYPE; /* * "States" for setting the LED. These correspond to * the possible 802.11 operational states and there may * be a many-to-one mapping between these states and the * actual hardware state for the LED's (i.e. the hardware * may have fewer states). */ typedef enum { HAL_LED_INIT = 0, HAL_LED_SCAN = 1, HAL_LED_AUTH = 2, HAL_LED_ASSOC = 3, HAL_LED_RUN = 4 } HAL_LED_STATE; /* * Transmit queue types/numbers. These are used to tag * each transmit queue in the hardware and to identify a set * of transmit queues for operations such as start/stop dma. */ typedef enum { HAL_TX_QUEUE_INACTIVE = 0, /* queue is inactive/unused */ HAL_TX_QUEUE_DATA = 1, /* data xmit q's */ HAL_TX_QUEUE_BEACON = 2, /* beacon xmit q */ HAL_TX_QUEUE_CAB = 3, /* "crap after beacon" xmit q */ HAL_TX_QUEUE_UAPSD = 4, /* u-apsd power save xmit q */ HAL_TX_QUEUE_PSPOLL = 5, /* power save poll xmit q */ } HAL_TX_QUEUE; #define HAL_NUM_TX_QUEUES 10 /* max possible # of queues */ /* * Transmit queue subtype. These map directly to * WME Access Categories (except for UPSD). Refer * to Table 5 of the WME spec. */ typedef enum { HAL_WME_AC_BK = 0, /* background access category */ HAL_WME_AC_BE = 1, /* best effort access category*/ HAL_WME_AC_VI = 2, /* video access category */ HAL_WME_AC_VO = 3, /* voice access category */ HAL_WME_UPSD = 4, /* uplink power save */ } HAL_TX_QUEUE_SUBTYPE; /* * Transmit queue flags that control various * operational parameters. */ typedef enum { /* * Per queue interrupt enables. When set the associated * interrupt may be delivered for packets sent through * the queue. Without these enabled no interrupts will * be delivered for transmits through the queue. */ HAL_TXQ_TXOKINT_ENABLE = 0x0001, /* enable TXOK interrupt */ HAL_TXQ_TXERRINT_ENABLE = 0x0001, /* enable TXERR interrupt */ HAL_TXQ_TXDESCINT_ENABLE = 0x0002, /* enable TXDESC interrupt */ HAL_TXQ_TXEOLINT_ENABLE = 0x0004, /* enable TXEOL interrupt */ HAL_TXQ_TXURNINT_ENABLE = 0x0008, /* enable TXURN interrupt */ /* * Enable hardware compression for packets sent through * the queue. The compression buffer must be setup and * packets must have a key entry marked in the tx descriptor. */ HAL_TXQ_COMPRESSION_ENABLE = 0x0010, /* enable h/w compression */ /* * Disable queue when veol is hit or ready time expires. * By default the queue is disabled only on reaching the * physical end of queue (i.e. a null link ptr in the * descriptor chain). */ HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE = 0x0020, /* * Schedule frames on delivery of a DBA (DMA Beacon Alert) * event. Frames will be transmitted only when this timer * fires, e.g to transmit a beacon in ap or adhoc modes. */ HAL_TXQ_DBA_GATED = 0x0040, /* schedule based on DBA */ /* * Each transmit queue has a counter that is incremented * each time the queue is enabled and decremented when * the list of frames to transmit is traversed (or when * the ready time for the queue expires). This counter * must be non-zero for frames to be scheduled for * transmission. The following controls disable bumping * this counter under certain conditions. Typically this * is used to gate frames based on the contents of another * queue (e.g. CAB traffic may only follow a beacon frame). * These are meaningful only when frames are scheduled * with a non-ASAP policy (e.g. DBA-gated). */ HAL_TXQ_CBR_DIS_QEMPTY = 0x0080, /* disable on this q empty */ HAL_TXQ_CBR_DIS_BEMPTY = 0x0100, /* disable on beacon q empty */ /* * Fragment burst backoff policy. Normally the no backoff * is done after a successful transmission, the next fragment * is sent at SIFS. If this flag is set backoff is done * after each fragment, regardless whether it was ack'd or * not, after the backoff count reaches zero a normal channel * access procedure is done before the next transmit (i.e. * wait AIFS instead of SIFS). */ HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE = 0x00800000, /* * Disable post-tx backoff following each frame. */ HAL_TXQ_BACKOFF_DISABLE = 0x00010000, /* disable post backoff */ /* * DCU arbiter lockout control. This controls how * lower priority tx queues are handled with respect to * to a specific queue when multiple queues have frames * to send. No lockout means lower priority queues arbitrate * concurrently with this queue. Intra-frame lockout * means lower priority queues are locked out until the * current frame transmits (e.g. including backoffs and bursting). * Global lockout means nothing lower can arbitrary so * long as there is traffic activity on this queue (frames, * backoff, etc). */ HAL_TXQ_ARB_LOCKOUT_INTRA = 0x00020000, /* intra-frame lockout */ HAL_TXQ_ARB_LOCKOUT_GLOBAL = 0x00040000, /* full lockout s */ HAL_TXQ_IGNORE_VIRTCOL = 0x00080000, /* ignore virt collisions */ HAL_TXQ_SEQNUM_INC_DIS = 0x00100000, /* disable seqnum increment */ } HAL_TX_QUEUE_FLAGS; typedef struct { uint32_t tqi_ver; /* hal TXQ version */ HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* subtype if applicable */ HAL_TX_QUEUE_FLAGS tqi_qflags; /* flags (see above) */ uint32_t tqi_priority; /* (not used) */ uint32_t tqi_aifs; /* aifs */ uint32_t tqi_cwmin; /* cwMin */ uint32_t tqi_cwmax; /* cwMax */ uint16_t tqi_shretry; /* rts retry limit */ uint16_t tqi_lgretry; /* long retry limit (not used)*/ uint32_t tqi_cbrPeriod; /* CBR period (us) */ uint32_t tqi_cbrOverflowLimit; /* threshold for CBROVF int */ uint32_t tqi_burstTime; /* max burst duration (us) */ uint32_t tqi_readyTime; /* frame schedule time (us) */ uint32_t tqi_compBuf; /* comp buffer phys addr */ } HAL_TXQ_INFO; #define HAL_TQI_NONVAL 0xffff /* token to use for aifs, cwmin, cwmax */ #define HAL_TXQ_USEDEFAULT ((uint32_t) -1) /* compression definitions */ #define HAL_COMP_BUF_MAX_SIZE 9216 /* 9K */ #define HAL_COMP_BUF_ALIGN_SIZE 512 /* * Transmit packet types. This belongs in ah_desc.h, but * is here so we can give a proper type to various parameters * (and not require everyone include the file). * * NB: These values are intentionally assigned for * direct use when setting up h/w descriptors. */ typedef enum { HAL_PKT_TYPE_NORMAL = 0, HAL_PKT_TYPE_ATIM = 1, HAL_PKT_TYPE_PSPOLL = 2, HAL_PKT_TYPE_BEACON = 3, HAL_PKT_TYPE_PROBE_RESP = 4, HAL_PKT_TYPE_CHIRP = 5, HAL_PKT_TYPE_GRP_POLL = 6, HAL_PKT_TYPE_AMPDU = 7, } HAL_PKT_TYPE; /* Rx Filter Frame Types */ typedef enum { /* * These bits correspond to AR_RX_FILTER for all chips. * Not all bits are supported by all chips. */ HAL_RX_FILTER_UCAST = 0x00000001, /* Allow unicast frames */ HAL_RX_FILTER_MCAST = 0x00000002, /* Allow multicast frames */ HAL_RX_FILTER_BCAST = 0x00000004, /* Allow broadcast frames */ HAL_RX_FILTER_CONTROL = 0x00000008, /* Allow control frames */ HAL_RX_FILTER_BEACON = 0x00000010, /* Allow beacon frames */ HAL_RX_FILTER_PROM = 0x00000020, /* Promiscuous mode */ HAL_RX_FILTER_PROBEREQ = 0x00000080, /* Allow probe request frames */ HAL_RX_FILTER_PHYERR = 0x00000100, /* Allow phy errors */ HAL_RX_FILTER_COMPBAR = 0x00000400, /* Allow compressed BAR */ HAL_RX_FILTER_COMP_BA = 0x00000800, /* Allow compressed blockack */ HAL_RX_FILTER_PHYRADAR = 0x00002000, /* Allow phy radar errors */ HAL_RX_FILTER_PSPOLL = 0x00004000, /* Allow PS-POLL frames */ HAL_RX_FILTER_MCAST_BCAST_ALL = 0x00008000, /* Allow all mcast/bcast frames */ /* * Magic RX filter flags that aren't targetting hardware bits * but instead the HAL sets individual bits - eg PHYERR will result * in OFDM/CCK timing error frames being received. */ HAL_RX_FILTER_BSSID = 0x40000000, /* Disable BSSID match */ } HAL_RX_FILTER; typedef enum { HAL_PM_AWAKE = 0, HAL_PM_FULL_SLEEP = 1, HAL_PM_NETWORK_SLEEP = 2, HAL_PM_UNDEFINED = 3 } HAL_POWER_MODE; /* * NOTE WELL: * These are mapped to take advantage of the common locations for many of * the bits on all of the currently supported MAC chips. This is to make * the ISR as efficient as possible, while still abstracting HW differences. * When new hardware breaks this commonality this enumerated type, as well * as the HAL functions using it, must be modified. All values are directly * mapped unless commented otherwise. */ typedef enum { HAL_INT_RX = 0x00000001, /* Non-common mapping */ HAL_INT_RXDESC = 0x00000002, HAL_INT_RXNOFRM = 0x00000008, HAL_INT_RXEOL = 0x00000010, HAL_INT_RXORN = 0x00000020, HAL_INT_TX = 0x00000040, /* Non-common mapping */ HAL_INT_TXDESC = 0x00000080, HAL_INT_TIM_TIMER= 0x00000100, HAL_INT_TXURN = 0x00000800, HAL_INT_MIB = 0x00001000, HAL_INT_RXPHY = 0x00004000, HAL_INT_RXKCM = 0x00008000, HAL_INT_SWBA = 0x00010000, HAL_INT_BMISS = 0x00040000, HAL_INT_BNR = 0x00100000, HAL_INT_TIM = 0x00200000, /* Non-common mapping */ HAL_INT_DTIM = 0x00400000, /* Non-common mapping */ HAL_INT_DTIMSYNC= 0x00800000, /* Non-common mapping */ HAL_INT_GPIO = 0x01000000, HAL_INT_CABEND = 0x02000000, /* Non-common mapping */ HAL_INT_TSFOOR = 0x04000000, /* Non-common mapping */ HAL_INT_TBTT = 0x08000000, /* Non-common mapping */ HAL_INT_CST = 0x10000000, /* Non-common mapping */ HAL_INT_GTT = 0x20000000, /* Non-common mapping */ HAL_INT_FATAL = 0x40000000, /* Non-common mapping */ #define HAL_INT_GLOBAL 0x80000000 /* Set/clear IER */ HAL_INT_BMISC = HAL_INT_TIM | HAL_INT_DTIM | HAL_INT_DTIMSYNC | HAL_INT_CABEND | HAL_INT_TBTT, /* Interrupt bits that map directly to ISR/IMR bits */ HAL_INT_COMMON = HAL_INT_RXNOFRM | HAL_INT_RXDESC | HAL_INT_RXEOL | HAL_INT_RXORN | HAL_INT_TXDESC | HAL_INT_TXURN | HAL_INT_MIB | HAL_INT_RXPHY | HAL_INT_RXKCM | HAL_INT_SWBA | HAL_INT_BMISS | HAL_INT_BNR | HAL_INT_GPIO, } HAL_INT; typedef enum { HAL_GPIO_MUX_OUTPUT = 0, HAL_GPIO_MUX_PCIE_ATTENTION_LED = 1, HAL_GPIO_MUX_PCIE_POWER_LED = 2, HAL_GPIO_MUX_TX_FRAME = 3, HAL_GPIO_MUX_RX_CLEAR_EXTERNAL = 4, HAL_GPIO_MUX_MAC_NETWORK_LED = 5, HAL_GPIO_MUX_MAC_POWER_LED = 6 } HAL_GPIO_MUX_TYPE; typedef enum { HAL_GPIO_INTR_LOW = 0, HAL_GPIO_INTR_HIGH = 1, HAL_GPIO_INTR_DISABLE = 2 } HAL_GPIO_INTR_TYPE; typedef enum { HAL_RFGAIN_INACTIVE = 0, HAL_RFGAIN_READ_REQUESTED = 1, HAL_RFGAIN_NEED_CHANGE = 2 } HAL_RFGAIN; typedef uint16_t HAL_CTRY_CODE; /* country code */ typedef uint16_t HAL_REG_DOMAIN; /* regulatory domain code */ #define HAL_ANTENNA_MIN_MODE 0 #define HAL_ANTENNA_FIXED_A 1 #define HAL_ANTENNA_FIXED_B 2 #define HAL_ANTENNA_MAX_MODE 3 typedef struct { uint32_t ackrcv_bad; uint32_t rts_bad; uint32_t rts_good; uint32_t fcs_bad; uint32_t beacons; } HAL_MIB_STATS; enum { HAL_MODE_11A = 0x001, /* 11a channels */ HAL_MODE_TURBO = 0x002, /* 11a turbo-only channels */ HAL_MODE_11B = 0x004, /* 11b channels */ HAL_MODE_PUREG = 0x008, /* 11g channels (OFDM only) */ #ifdef notdef HAL_MODE_11G = 0x010, /* 11g channels (OFDM/CCK) */ #else HAL_MODE_11G = 0x008, /* XXX historical */ #endif HAL_MODE_108G = 0x020, /* 11g+Turbo channels */ HAL_MODE_108A = 0x040, /* 11a+Turbo channels */ HAL_MODE_11A_HALF_RATE = 0x200, /* 11a half width channels */ HAL_MODE_11A_QUARTER_RATE = 0x400, /* 11a quarter width channels */ HAL_MODE_11G_HALF_RATE = 0x800, /* 11g half width channels */ HAL_MODE_11G_QUARTER_RATE = 0x1000, /* 11g quarter width channels */ HAL_MODE_11NG_HT20 = 0x008000, HAL_MODE_11NA_HT20 = 0x010000, HAL_MODE_11NG_HT40PLUS = 0x020000, HAL_MODE_11NG_HT40MINUS = 0x040000, HAL_MODE_11NA_HT40PLUS = 0x080000, HAL_MODE_11NA_HT40MINUS = 0x100000, HAL_MODE_ALL = 0xffffff }; typedef struct { int rateCount; /* NB: for proper padding */ uint8_t rateCodeToIndex[144]; /* back mapping */ struct { uint8_t valid; /* valid for rate control use */ uint8_t phy; /* CCK/OFDM/XR */ uint32_t rateKbps; /* transfer rate in kbs */ uint8_t rateCode; /* rate for h/w descriptors */ uint8_t shortPreamble; /* mask for enabling short * preamble in CCK rate code */ uint8_t dot11Rate; /* value for supported rates * info element of MLME */ uint8_t controlRate; /* index of next lower basic * rate; used for dur. calcs */ uint16_t lpAckDuration; /* long preamble ACK duration */ uint16_t spAckDuration; /* short preamble ACK duration*/ } info[32]; } HAL_RATE_TABLE; typedef struct { u_int rs_count; /* number of valid entries */ uint8_t rs_rates[32]; /* rates */ } HAL_RATE_SET; /* * 802.11n specific structures and enums */ typedef enum { HAL_CHAINTYPE_TX = 1, /* Tx chain type */ HAL_CHAINTYPE_RX = 2, /* RX chain type */ } HAL_CHAIN_TYPE; typedef struct { u_int Tries; u_int Rate; u_int PktDuration; u_int ChSel; u_int RateFlags; #define HAL_RATESERIES_RTS_CTS 0x0001 /* use rts/cts w/this series */ #define HAL_RATESERIES_2040 0x0002 /* use ext channel for series */ #define HAL_RATESERIES_HALFGI 0x0004 /* use half-gi for series */ } HAL_11N_RATE_SERIES; typedef enum { HAL_HT_MACMODE_20 = 0, /* 20 MHz operation */ HAL_HT_MACMODE_2040 = 1, /* 20/40 MHz operation */ } HAL_HT_MACMODE; typedef enum { HAL_HT_PHYMODE_20 = 0, /* 20 MHz operation */ HAL_HT_PHYMODE_2040 = 1, /* 20/40 MHz operation */ } HAL_HT_PHYMODE; typedef enum { HAL_HT_EXTPROTSPACING_20 = 0, /* 20 MHz spacing */ HAL_HT_EXTPROTSPACING_25 = 1, /* 25 MHz spacing */ } HAL_HT_EXTPROTSPACING; typedef enum { HAL_RX_CLEAR_CTL_LOW = 0x1, /* force control channel to appear busy */ HAL_RX_CLEAR_EXT_LOW = 0x2, /* force extension channel to appear busy */ } HAL_HT_RXCLEAR; /* * Antenna switch control. By default antenna selection * enables multiple (2) antenna use. To force use of the * A or B antenna only specify a fixed setting. Fixing * the antenna will also disable any diversity support. */ typedef enum { HAL_ANT_VARIABLE = 0, /* variable by programming */ HAL_ANT_FIXED_A = 1, /* fixed antenna A */ HAL_ANT_FIXED_B = 2, /* fixed antenna B */ } HAL_ANT_SETTING; typedef enum { HAL_M_STA = 1, /* infrastructure station */ HAL_M_IBSS = 0, /* IBSS (adhoc) station */ HAL_M_HOSTAP = 6, /* Software Access Point */ HAL_M_MONITOR = 8 /* Monitor mode */ } HAL_OPMODE; typedef struct { uint8_t kv_type; /* one of HAL_CIPHER */ uint8_t kv_pad; uint16_t kv_len; /* length in bits */ uint8_t kv_val[16]; /* enough for 128-bit keys */ uint8_t kv_mic[8]; /* TKIP MIC key */ uint8_t kv_txmic[8]; /* TKIP TX MIC key (optional) */ } HAL_KEYVAL; typedef enum { HAL_CIPHER_WEP = 0, HAL_CIPHER_AES_OCB = 1, HAL_CIPHER_AES_CCM = 2, HAL_CIPHER_CKIP = 3, HAL_CIPHER_TKIP = 4, HAL_CIPHER_CLR = 5, /* no encryption */ HAL_CIPHER_MIC = 127 /* TKIP-MIC, not a cipher */ } HAL_CIPHER; enum { HAL_SLOT_TIME_6 = 6, /* NB: for turbo mode */ HAL_SLOT_TIME_9 = 9, HAL_SLOT_TIME_20 = 20, }; /* * Per-station beacon timer state. Note that the specified * beacon interval (given in TU's) can also include flags * to force a TSF reset and to enable the beacon xmit logic. * If bs_cfpmaxduration is non-zero the hardware is setup to * coexist with a PCF-capable AP. */ typedef struct { uint32_t bs_nexttbtt; /* next beacon in TU */ uint32_t bs_nextdtim; /* next DTIM in TU */ uint32_t bs_intval; /* beacon interval+flags */ #define HAL_BEACON_PERIOD 0x0000ffff /* beacon interval period */ #define HAL_BEACON_ENA 0x00800000 /* beacon xmit enable */ #define HAL_BEACON_RESET_TSF 0x01000000 /* clear TSF */ uint32_t bs_dtimperiod; uint16_t bs_cfpperiod; /* CFP period in TU */ uint16_t bs_cfpmaxduration; /* max CFP duration in TU */ uint32_t bs_cfpnext; /* next CFP in TU */ uint16_t bs_timoffset; /* byte offset to TIM bitmap */ uint16_t bs_bmissthreshold; /* beacon miss threshold */ uint32_t bs_sleepduration; /* max sleep duration */ } HAL_BEACON_STATE; /* * Like HAL_BEACON_STATE but for non-station mode setup. * NB: see above flag definitions for bt_intval. */ typedef struct { uint32_t bt_intval; /* beacon interval+flags */ uint32_t bt_nexttbtt; /* next beacon in TU */ uint32_t bt_nextatim; /* next ATIM in TU */ uint32_t bt_nextdba; /* next DBA in 1/8th TU */ uint32_t bt_nextswba; /* next SWBA in 1/8th TU */ uint32_t bt_flags; /* timer enables */ #define HAL_BEACON_TBTT_EN 0x00000001 #define HAL_BEACON_DBA_EN 0x00000002 #define HAL_BEACON_SWBA_EN 0x00000004 } HAL_BEACON_TIMERS; /* * Per-node statistics maintained by the driver for use in * optimizing signal quality and other operational aspects. */ typedef struct { uint32_t ns_avgbrssi; /* average beacon rssi */ uint32_t ns_avgrssi; /* average data rssi */ uint32_t ns_avgtxrssi; /* average tx rssi */ } HAL_NODE_STATS; #define HAL_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */ struct ath_desc; struct ath_tx_status; struct ath_rx_status; struct ieee80211_channel; /* * This is a channel survey sample entry. * * The AR5212 ANI routines fill these samples. The ANI code then uses it * when calculating listen time; it is also exported via a diagnostic * API. */ typedef struct { uint32_t seq_num; uint32_t tx_busy; uint32_t rx_busy; uint32_t chan_busy; uint32_t cycle_count; } HAL_SURVEY_SAMPLE; /* * This provides 3.2 seconds of sample space given an * ANI time of 1/10th of a second. This may not be enough! */ #define CHANNEL_SURVEY_SAMPLE_COUNT 32 typedef struct { HAL_SURVEY_SAMPLE samples[CHANNEL_SURVEY_SAMPLE_COUNT]; uint32_t cur_sample; /* current sample in sequence */ uint32_t cur_seq; /* current sequence number */ } HAL_CHANNEL_SURVEY; /* * ANI commands. * * These are used both internally and externally via the diagnostic * API. * * Note that this is NOT the ANI commands being used via the INTMIT * capability - that has a different mapping for some reason. */ typedef enum { HAL_ANI_PRESENT = 0, /* is ANI support present */ HAL_ANI_NOISE_IMMUNITY_LEVEL = 1, /* set level */ HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION = 2, /* enable/disable */ HAL_ANI_CCK_WEAK_SIGNAL_THR = 3, /* enable/disable */ HAL_ANI_FIRSTEP_LEVEL = 4, /* set level */ HAL_ANI_SPUR_IMMUNITY_LEVEL = 5, /* set level */ HAL_ANI_MODE = 6, /* 0 => manual, 1 => auto (XXX do not change) */ HAL_ANI_PHYERR_RESET = 7, /* reset phy error stats */ } HAL_ANI_CMD; /* * This is the layout of the ANI INTMIT capability. * * Notice that the command values differ to HAL_ANI_CMD. */ typedef enum { HAL_CAP_INTMIT_PRESENT = 0, HAL_CAP_INTMIT_ENABLE = 1, HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL = 2, HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL = 3, HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR = 4, HAL_CAP_INTMIT_FIRSTEP_LEVEL = 5, HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL = 6 } HAL_CAP_INTMIT_CMD; typedef struct { int32_t pe_firpwr; /* FIR pwr out threshold */ int32_t pe_rrssi; /* Radar rssi thresh */ int32_t pe_height; /* Pulse height thresh */ int32_t pe_prssi; /* Pulse rssi thresh */ int32_t pe_inband; /* Inband thresh */ /* The following params are only for AR5413 and later */ u_int32_t pe_relpwr; /* Relative power threshold in 0.5dB steps */ u_int32_t pe_relstep; /* Pulse Relative step threshold in 0.5dB steps */ u_int32_t pe_maxlen; /* Max length of radar sign in 0.8us units */ int32_t pe_usefir128; /* Use the average in-band power measured over 128 cycles */ int32_t pe_blockradar; /* * Enable to block radar check if pkt detect is done via OFDM * weak signal detect or pkt is detected immediately after tx * to rx transition */ int32_t pe_enmaxrssi; /* * Enable to use the max rssi instead of the last rssi during * fine gain changes for radar detection */ int32_t pe_extchannel; /* Enable DFS on ext channel */ int32_t pe_enabled; /* Whether radar detection is enabled */ } HAL_PHYERR_PARAM; #define HAL_PHYERR_PARAM_NOVAL 65535 #define HAL_PHYERR_PARAM_ENABLE 0x8000 /* Enable/Disable if applicable */ /* * Flag for setting QUIET period */ typedef enum { HAL_QUIET_DISABLE = 0x0, HAL_QUIET_ENABLE = 0x1, HAL_QUIET_ADD_CURRENT_TSF = 0x2, /* add current TSF to next_start offset */ HAL_QUIET_ADD_SWBA_RESP_TIME = 0x4, /* add beacon response time to next_start offset */ } HAL_QUIET_FLAG; #define HAL_DFS_EVENT_PRICH 0x0000001 #define HAL_DFS_EVENT_EXTCH 0x0000002 #define HAL_DFS_EVENT_EXTEARLY 0x0000004 #define HAL_DFS_EVENT_ISDC 0x0000008 struct dfs_event { uint64_t re_full_ts; /* 64-bit full timestamp from interrupt time */ uint32_t re_ts; /* Original 15 bit recv timestamp */ uint8_t re_rssi; /* rssi of radar event */ uint8_t re_dur; /* duration of radar pulse */ uint32_t re_flags; /* Flags (see above) */ }; typedef struct dfs_event HAL_DFS_EVENT; typedef struct { int ah_debug; /* only used if AH_DEBUG is defined */ int ah_ar5416_biasadj; /* enable AR2133 radio specific bias fiddling */ /* NB: these are deprecated; they exist for now for compatibility */ int ah_dma_beacon_response_time;/* in TU's */ int ah_sw_beacon_response_time; /* in TU's */ int ah_additional_swba_backoff; /* in TU's */ }HAL_OPS_CONFIG; /* * Hardware Access Layer (HAL) API. * * Clients of the HAL call ath_hal_attach to obtain a reference to an * ath_hal structure for use with the device. Hardware-related operations * that follow must call back into the HAL through interface, supplying * the reference as the first parameter. Note that before using the * reference returned by ath_hal_attach the caller should verify the * ABI version number. */ struct ath_hal { uint32_t ah_magic; /* consistency check magic number */ uint16_t ah_devid; /* PCI device ID */ uint16_t ah_subvendorid; /* PCI subvendor ID */ HAL_SOFTC ah_sc; /* back pointer to driver/os state */ HAL_BUS_TAG ah_st; /* params for register r+w */ HAL_BUS_HANDLE ah_sh; HAL_CTRY_CODE ah_countryCode; uint32_t ah_macVersion; /* MAC version id */ uint16_t ah_macRev; /* MAC revision */ uint16_t ah_phyRev; /* PHY revision */ /* NB: when only one radio is present the rev is in 5Ghz */ uint16_t ah_analog5GhzRev;/* 5GHz radio revision */ uint16_t ah_analog2GhzRev;/* 2GHz radio revision */ uint16_t *ah_eepromdata; /* eeprom buffer, if needed */ HAL_OPS_CONFIG ah_config; const HAL_RATE_TABLE *__ahdecl(*ah_getRateTable)(struct ath_hal *, u_int mode); void __ahdecl(*ah_detach)(struct ath_hal*); /* Reset functions */ HAL_BOOL __ahdecl(*ah_reset)(struct ath_hal *, HAL_OPMODE, struct ieee80211_channel *, HAL_BOOL bChannelChange, HAL_STATUS *status); HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *); HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *); void __ahdecl(*ah_configPCIE)(struct ath_hal *, HAL_BOOL restore); void __ahdecl(*ah_disablePCIE)(struct ath_hal *); void __ahdecl(*ah_setPCUConfig)(struct ath_hal *); HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*, struct ieee80211_channel *, HAL_BOOL *); HAL_BOOL __ahdecl(*ah_perCalibrationN)(struct ath_hal *, struct ieee80211_channel *, u_int chainMask, HAL_BOOL longCal, HAL_BOOL *isCalDone); HAL_BOOL __ahdecl(*ah_resetCalValid)(struct ath_hal *, const struct ieee80211_channel *); HAL_BOOL __ahdecl(*ah_setTxPower)(struct ath_hal *, const struct ieee80211_channel *, uint16_t *); HAL_BOOL __ahdecl(*ah_setTxPowerLimit)(struct ath_hal *, uint32_t); HAL_BOOL __ahdecl(*ah_setBoardValues)(struct ath_hal *, const struct ieee80211_channel *); /* Transmit functions */ HAL_BOOL __ahdecl(*ah_updateTxTrigLevel)(struct ath_hal*, HAL_BOOL incTrigLevel); int __ahdecl(*ah_setupTxQueue)(struct ath_hal *, HAL_TX_QUEUE, const HAL_TXQ_INFO *qInfo); HAL_BOOL __ahdecl(*ah_setTxQueueProps)(struct ath_hal *, int q, const HAL_TXQ_INFO *qInfo); HAL_BOOL __ahdecl(*ah_getTxQueueProps)(struct ath_hal *, int q, HAL_TXQ_INFO *qInfo); HAL_BOOL __ahdecl(*ah_releaseTxQueue)(struct ath_hal *ah, u_int q); HAL_BOOL __ahdecl(*ah_resetTxQueue)(struct ath_hal *ah, u_int q); uint32_t __ahdecl(*ah_getTxDP)(struct ath_hal*, u_int); HAL_BOOL __ahdecl(*ah_setTxDP)(struct ath_hal*, u_int, uint32_t txdp); uint32_t __ahdecl(*ah_numTxPending)(struct ath_hal *, u_int q); HAL_BOOL __ahdecl(*ah_startTxDma)(struct ath_hal*, u_int); HAL_BOOL __ahdecl(*ah_stopTxDma)(struct ath_hal*, u_int); HAL_BOOL __ahdecl(*ah_setupTxDesc)(struct ath_hal *, struct ath_desc *, u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int txPower, u_int txRate0, u_int txTries0, u_int keyIx, u_int antMode, u_int flags, u_int rtsctsRate, u_int rtsctsDuration, u_int compicvLen, u_int compivLen, u_int comp); HAL_BOOL __ahdecl(*ah_setupXTxDesc)(struct ath_hal *, struct ath_desc*, u_int txRate1, u_int txTries1, u_int txRate2, u_int txTries2, u_int txRate3, u_int txTries3); HAL_BOOL __ahdecl(*ah_fillTxDesc)(struct ath_hal *, struct ath_desc *, u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg, const struct ath_desc *); HAL_STATUS __ahdecl(*ah_procTxDesc)(struct ath_hal *, struct ath_desc *, struct ath_tx_status *); void __ahdecl(*ah_getTxIntrQueue)(struct ath_hal *, uint32_t *); void __ahdecl(*ah_reqTxIntrDesc)(struct ath_hal *, struct ath_desc*); HAL_BOOL __ahdecl(*ah_getTxCompletionRates)(struct ath_hal *, const struct ath_desc *ds, int *rates, int *tries); /* Receive Functions */ uint32_t __ahdecl(*ah_getRxDP)(struct ath_hal*); void __ahdecl(*ah_setRxDP)(struct ath_hal*, uint32_t rxdp); void __ahdecl(*ah_enableReceive)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*); void __ahdecl(*ah_startPcuReceive)(struct ath_hal*); void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*); void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*, uint32_t filter0, uint32_t filter1); HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*, uint32_t index); HAL_BOOL __ahdecl(*ah_clrMulticastFilterIndex)(struct ath_hal*, uint32_t index); uint32_t __ahdecl(*ah_getRxFilter)(struct ath_hal*); void __ahdecl(*ah_setRxFilter)(struct ath_hal*, uint32_t); HAL_BOOL __ahdecl(*ah_setupRxDesc)(struct ath_hal *, struct ath_desc *, uint32_t size, u_int flags); HAL_STATUS __ahdecl(*ah_procRxDesc)(struct ath_hal *, struct ath_desc *, uint32_t phyAddr, struct ath_desc *next, uint64_t tsf, struct ath_rx_status *); void __ahdecl(*ah_rxMonitor)(struct ath_hal *, const HAL_NODE_STATS *, const struct ieee80211_channel *); void __ahdecl(*ah_aniPoll)(struct ath_hal *, const struct ieee80211_channel *); void __ahdecl(*ah_procMibEvent)(struct ath_hal *, const HAL_NODE_STATS *); void __ahdecl(*ah_rxAntCombDiversity)(struct ath_hal *, struct ath_rx_status *, unsigned long, int); /* Misc Functions */ HAL_STATUS __ahdecl(*ah_getCapability)(struct ath_hal *, HAL_CAPABILITY_TYPE, uint32_t capability, uint32_t *result); HAL_BOOL __ahdecl(*ah_setCapability)(struct ath_hal *, HAL_CAPABILITY_TYPE, uint32_t capability, uint32_t setting, HAL_STATUS *); HAL_BOOL __ahdecl(*ah_getDiagState)(struct ath_hal *, int request, const void *args, uint32_t argsize, void **result, uint32_t *resultsize); void __ahdecl(*ah_getMacAddress)(struct ath_hal *, uint8_t *); HAL_BOOL __ahdecl(*ah_setMacAddress)(struct ath_hal *, const uint8_t*); void __ahdecl(*ah_getBssIdMask)(struct ath_hal *, uint8_t *); HAL_BOOL __ahdecl(*ah_setBssIdMask)(struct ath_hal *, const uint8_t*); HAL_BOOL __ahdecl(*ah_setRegulatoryDomain)(struct ath_hal*, uint16_t, HAL_STATUS *); void __ahdecl(*ah_setLedState)(struct ath_hal*, HAL_LED_STATE); void __ahdecl(*ah_writeAssocid)(struct ath_hal*, const uint8_t *bssid, uint16_t assocId); HAL_BOOL __ahdecl(*ah_gpioCfgOutput)(struct ath_hal *, uint32_t gpio, HAL_GPIO_MUX_TYPE); HAL_BOOL __ahdecl(*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio); uint32_t __ahdecl(*ah_gpioGet)(struct ath_hal *, uint32_t gpio); HAL_BOOL __ahdecl(*ah_gpioSet)(struct ath_hal *, uint32_t gpio, uint32_t val); void __ahdecl(*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t); uint32_t __ahdecl(*ah_getTsf32)(struct ath_hal*); uint64_t __ahdecl(*ah_getTsf64)(struct ath_hal*); void __ahdecl(*ah_resetTsf)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_detectCardPresent)(struct ath_hal*); void __ahdecl(*ah_updateMibCounters)(struct ath_hal*, HAL_MIB_STATS*); HAL_RFGAIN __ahdecl(*ah_getRfGain)(struct ath_hal*); u_int __ahdecl(*ah_getDefAntenna)(struct ath_hal*); void __ahdecl(*ah_setDefAntenna)(struct ath_hal*, u_int); HAL_ANT_SETTING __ahdecl(*ah_getAntennaSwitch)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setAntennaSwitch)(struct ath_hal*, HAL_ANT_SETTING); HAL_BOOL __ahdecl(*ah_setSifsTime)(struct ath_hal*, u_int); u_int __ahdecl(*ah_getSifsTime)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setSlotTime)(struct ath_hal*, u_int); u_int __ahdecl(*ah_getSlotTime)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setAckTimeout)(struct ath_hal*, u_int); u_int __ahdecl(*ah_getAckTimeout)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setAckCTSRate)(struct ath_hal*, u_int); u_int __ahdecl(*ah_getAckCTSRate)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setCTSTimeout)(struct ath_hal*, u_int); u_int __ahdecl(*ah_getCTSTimeout)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_setDecompMask)(struct ath_hal*, uint16_t, int); void __ahdecl(*ah_setCoverageClass)(struct ath_hal*, uint8_t, int); HAL_STATUS __ahdecl(*ah_setQuiet)(struct ath_hal *ah, uint32_t period, uint32_t duration, uint32_t nextStart, HAL_QUIET_FLAG flag); /* DFS functions */ void __ahdecl(*ah_enableDfs)(struct ath_hal *ah, HAL_PHYERR_PARAM *pe); void __ahdecl(*ah_getDfsThresh)(struct ath_hal *ah, HAL_PHYERR_PARAM *pe); HAL_BOOL __ahdecl(*ah_procRadarEvent)(struct ath_hal *ah, struct ath_rx_status *rxs, uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event); /* Key Cache Functions */ uint32_t __ahdecl(*ah_getKeyCacheSize)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_resetKeyCacheEntry)(struct ath_hal*, uint16_t); HAL_BOOL __ahdecl(*ah_isKeyCacheEntryValid)(struct ath_hal *, uint16_t); HAL_BOOL __ahdecl(*ah_setKeyCacheEntry)(struct ath_hal*, uint16_t, const HAL_KEYVAL *, const uint8_t *, int); HAL_BOOL __ahdecl(*ah_setKeyCacheEntryMac)(struct ath_hal*, uint16_t, const uint8_t *); /* Power Management Functions */ HAL_BOOL __ahdecl(*ah_setPowerMode)(struct ath_hal*, HAL_POWER_MODE mode, int setChip); HAL_POWER_MODE __ahdecl(*ah_getPowerMode)(struct ath_hal*); int16_t __ahdecl(*ah_getChanNoise)(struct ath_hal *, const struct ieee80211_channel *); /* Beacon Management Functions */ void __ahdecl(*ah_setBeaconTimers)(struct ath_hal*, const HAL_BEACON_TIMERS *); /* NB: deprecated, use ah_setBeaconTimers instead */ void __ahdecl(*ah_beaconInit)(struct ath_hal *, uint32_t nexttbtt, uint32_t intval); void __ahdecl(*ah_setStationBeaconTimers)(struct ath_hal*, const HAL_BEACON_STATE *); void __ahdecl(*ah_resetStationBeaconTimers)(struct ath_hal*); /* 802.11n Functions */ HAL_BOOL __ahdecl(*ah_chainTxDesc)(struct ath_hal *, struct ath_desc *, u_int, u_int, u_int, HAL_PKT_TYPE, u_int, HAL_CIPHER, uint8_t, u_int, HAL_BOOL, HAL_BOOL); HAL_BOOL __ahdecl(*ah_setupFirstTxDesc)(struct ath_hal *, struct ath_desc *, u_int, u_int, u_int, u_int, u_int, u_int, u_int, u_int); HAL_BOOL __ahdecl(*ah_setupLastTxDesc)(struct ath_hal *, struct ath_desc *, const struct ath_desc *); void __ahdecl(*ah_set11nRateScenario)(struct ath_hal *, struct ath_desc *, u_int, u_int, HAL_11N_RATE_SERIES [], u_int, u_int); void __ahdecl(*ah_set11nAggrFirst)(struct ath_hal *, struct ath_desc *, u_int, u_int); void __ahdecl(*ah_set11nAggrMiddle)(struct ath_hal *, struct ath_desc *, u_int); void __ahdecl(*ah_set11nAggrLast)(struct ath_hal *, struct ath_desc *); void __ahdecl(*ah_clr11nAggr)(struct ath_hal *, struct ath_desc *); void __ahdecl(*ah_set11nBurstDuration)(struct ath_hal *, struct ath_desc *, u_int); + uint32_t __ahdecl(*ah_get_mib_cycle_counts_pct) (struct ath_hal *, + uint32_t *, uint32_t *, uint32_t *, uint32_t *); + uint32_t __ahdecl(*ah_get11nExtBusy)(struct ath_hal *); void __ahdecl(*ah_set11nMac2040)(struct ath_hal *, HAL_HT_MACMODE); HAL_HT_RXCLEAR __ahdecl(*ah_get11nRxClear)(struct ath_hal *ah); void __ahdecl(*ah_set11nRxClear)(struct ath_hal *, HAL_HT_RXCLEAR); /* Interrupt functions */ HAL_BOOL __ahdecl(*ah_isInterruptPending)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_getPendingInterrupts)(struct ath_hal*, HAL_INT*); HAL_INT __ahdecl(*ah_getInterrupts)(struct ath_hal*); HAL_INT __ahdecl(*ah_setInterrupts)(struct ath_hal*, HAL_INT); }; /* * Check the PCI vendor ID and device ID against Atheros' values * and return a printable description for any Atheros hardware. * AH_NULL is returned if the ID's do not describe Atheros hardware. */ extern const char *__ahdecl ath_hal_probe(uint16_t vendorid, uint16_t devid); /* * Attach the HAL for use with the specified device. The device is * defined by the PCI device ID. The caller provides an opaque pointer * to an upper-layer data structure (HAL_SOFTC) that is stored in the * HAL state block for later use. Hardware register accesses are done * using the specified bus tag and handle. On successful return a * reference to a state block is returned that must be supplied in all * subsequent HAL calls. Storage associated with this reference is * dynamically allocated and must be freed by calling the ah_detach * method when the client is done. If the attach operation fails a * null (AH_NULL) reference will be returned and a status code will * be returned if the status parameter is non-zero. */ extern struct ath_hal * __ahdecl ath_hal_attach(uint16_t devid, HAL_SOFTC, HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata, HAL_STATUS* status); extern const char *ath_hal_mac_name(struct ath_hal *); extern const char *ath_hal_rf_name(struct ath_hal *); /* * Regulatory interfaces. Drivers should use ath_hal_init_channels to * request a set of channels for a particular country code and/or * regulatory domain. If CTRY_DEFAULT and SKU_NONE are specified then * this list is constructed according to the contents of the EEPROM. * ath_hal_getchannels acts similarly but does not alter the operating * state; this can be used to collect information for a particular * regulatory configuration. Finally ath_hal_set_channels installs a * channel list constructed outside the driver. The HAL will adopt the * channel list and setup internal state according to the specified * regulatory configuration (e.g. conformance test limits). * * For all interfaces the channel list is returned in the supplied array. * maxchans defines the maximum size of this array. nchans contains the * actual number of channels returned. If a problem occurred then a * status code != HAL_OK is returned. */ struct ieee80211_channel; /* * Return a list of channels according to the specified regulatory. */ extern HAL_STATUS __ahdecl ath_hal_getchannels(struct ath_hal *, struct ieee80211_channel *chans, u_int maxchans, int *nchans, u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn, HAL_BOOL enableExtendedChannels); /* * Return a list of channels and install it as the current operating * regulatory list. */ extern HAL_STATUS __ahdecl ath_hal_init_channels(struct ath_hal *, struct ieee80211_channel *chans, u_int maxchans, int *nchans, u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN rd, HAL_BOOL enableExtendedChannels); /* * Install the list of channels as the current operating regulatory * and setup related state according to the country code and sku. */ extern HAL_STATUS __ahdecl ath_hal_set_channels(struct ath_hal *, struct ieee80211_channel *chans, int nchans, HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn); /* * Fetch the ctl/ext noise floor values reported by a MIMO * radio. Returns 1 for valid results, 0 for invalid channel. */ extern int __ahdecl ath_hal_get_mimo_chan_noise(struct ath_hal *ah, const struct ieee80211_channel *chan, int16_t *nf_ctl, int16_t *nf_ext); /* * Calibrate noise floor data following a channel scan or similar. * This must be called prior retrieving noise floor data. */ extern void __ahdecl ath_hal_process_noisefloor(struct ath_hal *ah); /* * Return bit mask of wireless modes supported by the hardware. */ extern u_int __ahdecl ath_hal_getwirelessmodes(struct ath_hal*); /* * Calculate the packet TX time for a legacy or 11n frame */ extern uint32_t __ahdecl ath_hal_pkt_txtime(struct ath_hal *ah, const HAL_RATE_TABLE *rates, uint32_t frameLen, uint16_t rateix, HAL_BOOL isht40, HAL_BOOL shortPreamble); /* * Calculate the duration of an 11n frame. */ extern uint32_t __ahdecl ath_computedur_ht(uint32_t frameLen, uint16_t rate, int streams, HAL_BOOL isht40, HAL_BOOL isShortGI); /* * Calculate the transmit duration of a legacy frame. */ extern uint16_t __ahdecl ath_hal_computetxtime(struct ath_hal *, const HAL_RATE_TABLE *rates, uint32_t frameLen, uint16_t rateix, HAL_BOOL shortPreamble); #endif /* _ATH_AH_H_ */ Index: user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416.h =================================================================== --- user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416.h (revision 225571) +++ user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416.h (revision 225572) @@ -1,348 +1,353 @@ /* * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD$ */ #ifndef _ATH_AR5416_H_ #define _ATH_AR5416_H_ #include "ar5212/ar5212.h" #include "ar5416_cal.h" #include "ah_eeprom_v14.h" /* for CAL_TARGET_POWER_* */ #define AR5416_MAGIC 0x20065416 enum { HAL_RESET_POWER_ON, HAL_RESET_WARM, HAL_RESET_COLD, }; typedef struct { uint16_t synth_center; uint16_t ctl_center; uint16_t ext_center; } CHAN_CENTERS; typedef enum Ar5416_Rates { rate6mb, rate9mb, rate12mb, rate18mb, rate24mb, rate36mb, rate48mb, rate54mb, rate1l, rate2l, rate2s, rate5_5l, rate5_5s, rate11l, rate11s, rateXr, rateHt20_0, rateHt20_1, rateHt20_2, rateHt20_3, rateHt20_4, rateHt20_5, rateHt20_6, rateHt20_7, rateHt40_0, rateHt40_1, rateHt40_2, rateHt40_3, rateHt40_4, rateHt40_5, rateHt40_6, rateHt40_7, rateDupCck, rateDupOfdm, rateExtCck, rateExtOfdm, Ar5416RateSize } AR5416_RATES; #define AR5416_DEFAULT_RXCHAINMASK 7 #define AR5416_DEFAULT_TXCHAINMASK 1 #define AR5416_MAX_RATE_POWER 63 #define AR5416_KEYTABLE_SIZE 128 #define AR5416_CCA_MAX_GOOD_VALUE -85 #define AR5416_CCA_MAX_HIGH_VALUE -62 #define AR5416_CCA_MIN_BAD_VALUE -140 #define AR9285_CCA_MAX_GOOD_VALUE -118 #define AR5416_SPUR_RSSI_THRESH 40 struct ar5416NfLimits { int16_t max; int16_t min; int16_t nominal; }; struct ath_hal_5416 { struct ath_hal_5212 ah_5212; /* NB: RF data setup at attach */ HAL_INI_ARRAY ah_ini_bb_rfgain; HAL_INI_ARRAY ah_ini_bank0; HAL_INI_ARRAY ah_ini_bank1; HAL_INI_ARRAY ah_ini_bank2; HAL_INI_ARRAY ah_ini_bank3; HAL_INI_ARRAY ah_ini_bank6; HAL_INI_ARRAY ah_ini_bank7; HAL_INI_ARRAY ah_ini_addac; HAL_INI_ARRAY ah_ini_pcieserdes; void (*ah_writeIni)(struct ath_hal *, const struct ieee80211_channel *); void (*ah_spurMitigate)(struct ath_hal *, const struct ieee80211_channel *); /* calibration ops */ HAL_BOOL (*ah_cal_initcal)(struct ath_hal *, const struct ieee80211_channel *); void (*ah_cal_pacal)(struct ath_hal *, HAL_BOOL is_reset); /* optional open-loop tx power control related methods */ void (*ah_olcInit)(struct ath_hal *); void (*ah_olcTempCompensation)(struct ath_hal *); /* tx power control */ HAL_BOOL (*ah_setPowerCalTable) (struct ath_hal *ah, struct ar5416eeprom *pEepData, const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset); /* baseband operations */ void (*ah_initPLL) (struct ath_hal *ah, const struct ieee80211_channel *chan); u_int ah_globaltxtimeout; /* global tx timeout */ u_int ah_gpioMask; int ah_hangs; /* h/w hangs state */ uint8_t ah_keytype[AR5416_KEYTABLE_SIZE]; /* - * Extension Channel Rx Clear State + * Primary / Extension Channel Rx Clear State */ uint32_t ah_cycleCount; uint32_t ah_ctlBusy; uint32_t ah_extBusy; + uint32_t ah_rxBusy; + uint32_t ah_txBusy; uint32_t ah_rx_chainmask; uint32_t ah_tx_chainmask; HAL_ANI_CMD ah_ani_function; struct ar5416PerCal ah_cal; /* periodic calibration state */ struct ar5416NfLimits nf_2g; struct ar5416NfLimits nf_5g; int initPDADC; int ah_need_an_top2_fixup; /* merlin or later chips that may need this workaround */ }; #define AH5416(_ah) ((struct ath_hal_5416 *)(_ah)) #define IS_5416_PCI(ah) ((AH_PRIVATE(ah)->ah_macVersion) == AR_SREV_VERSION_OWL_PCI) #define IS_5416_PCIE(ah) ((AH_PRIVATE(ah)->ah_macVersion) == AR_SREV_VERSION_OWL_PCIE) #undef IS_PCIE #define IS_PCIE(ah) (IS_5416_PCIE(ah)) extern HAL_BOOL ar2133RfAttach(struct ath_hal *, HAL_STATUS *); struct ath_hal; extern uint32_t ar5416GetRadioRev(struct ath_hal *ah); extern void ar5416InitState(struct ath_hal_5416 *, uint16_t devid, HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status); extern void ar5416Detach(struct ath_hal *ah); extern void ar5416AttachPCIE(struct ath_hal *ah); extern HAL_BOOL ar5416FillCapabilityInfo(struct ath_hal *ah); extern void ar5416AniAttach(struct ath_hal *, const struct ar5212AniParams *, const struct ar5212AniParams *, HAL_BOOL ena); extern void ar5416AniDetach(struct ath_hal *); extern HAL_BOOL ar5416AniControl(struct ath_hal *, HAL_ANI_CMD cmd, int param); extern HAL_BOOL ar5416AniSetParams(struct ath_hal *, const struct ar5212AniParams *, const struct ar5212AniParams *); extern void ar5416ProcessMibIntr(struct ath_hal *, const HAL_NODE_STATS *); extern void ar5416RxMonitor(struct ath_hal *, const HAL_NODE_STATS *, const struct ieee80211_channel *); extern void ar5416AniPoll(struct ath_hal *, const struct ieee80211_channel *); extern void ar5416AniReset(struct ath_hal *, const struct ieee80211_channel *, HAL_OPMODE, int); extern void ar5416SetBeaconTimers(struct ath_hal *, const HAL_BEACON_TIMERS *); extern void ar5416BeaconInit(struct ath_hal *ah, uint32_t next_beacon, uint32_t beacon_period); extern void ar5416ResetStaBeaconTimers(struct ath_hal *ah); extern void ar5416SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *); extern HAL_BOOL ar5416EepromRead(struct ath_hal *, u_int off, uint16_t *data); extern HAL_BOOL ar5416EepromWrite(struct ath_hal *, u_int off, uint16_t data); extern HAL_BOOL ar5416IsInterruptPending(struct ath_hal *ah); extern HAL_BOOL ar5416GetPendingInterrupts(struct ath_hal *, HAL_INT *masked); extern HAL_INT ar5416SetInterrupts(struct ath_hal *ah, HAL_INT ints); extern HAL_BOOL ar5416GpioCfgOutput(struct ath_hal *, uint32_t gpio, HAL_GPIO_MUX_TYPE); extern HAL_BOOL ar5416GpioCfgInput(struct ath_hal *, uint32_t gpio); extern HAL_BOOL ar5416GpioSet(struct ath_hal *, uint32_t gpio, uint32_t val); extern uint32_t ar5416GpioGet(struct ath_hal *ah, uint32_t gpio); extern void ar5416GpioSetIntr(struct ath_hal *ah, u_int, uint32_t ilevel); extern u_int ar5416GetWirelessModes(struct ath_hal *ah); extern void ar5416SetLedState(struct ath_hal *ah, HAL_LED_STATE state); extern void ar5416ResetTsf(struct ath_hal *ah); extern HAL_BOOL ar5416SetAntennaSwitch(struct ath_hal *, HAL_ANT_SETTING); extern HAL_BOOL ar5416SetDecompMask(struct ath_hal *, uint16_t, int); extern void ar5416SetCoverageClass(struct ath_hal *, uint8_t, int); +extern uint32_t ar5416GetMibCycleCountsPct(struct ath_hal *ah, + uint32_t *rxc_pcnt, uint32_t *rxextc_pcnt, uint32_t *rxf_pcnt, + uint32_t *txf_pcnt); extern uint32_t ar5416Get11nExtBusy(struct ath_hal *ah); extern void ar5416Set11nMac2040(struct ath_hal *ah, HAL_HT_MACMODE mode); extern HAL_HT_RXCLEAR ar5416Get11nRxClear(struct ath_hal *ah); extern void ar5416Set11nRxClear(struct ath_hal *ah, HAL_HT_RXCLEAR rxclear); extern HAL_STATUS ar5416SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration, uint32_t nextStart, HAL_QUIET_FLAG flag); extern HAL_STATUS ar5416GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type, uint32_t capability, uint32_t *result); extern HAL_BOOL ar5416GetDiagState(struct ath_hal *ah, int request, const void *args, uint32_t argsize, void **result, uint32_t *resultsize); extern HAL_BOOL ar5416SetRifsDelay(struct ath_hal *ah, const struct ieee80211_channel *chan, HAL_BOOL enable); extern void ar5416EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe); extern void ar5416GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe); extern HAL_BOOL ar5416ProcessRadarEvent(struct ath_hal *ah, struct ath_rx_status *rxs, uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event); extern HAL_BOOL ar5416SetPowerMode(struct ath_hal *ah, HAL_POWER_MODE mode, int setChip); extern HAL_POWER_MODE ar5416GetPowerMode(struct ath_hal *ah); extern HAL_BOOL ar5416GetPowerStatus(struct ath_hal *ah); extern HAL_BOOL ar5416ResetKeyCacheEntry(struct ath_hal *ah, uint16_t entry); extern HAL_BOOL ar5416SetKeyCacheEntry(struct ath_hal *ah, uint16_t entry, const HAL_KEYVAL *k, const uint8_t *mac, int xorKey); extern uint32_t ar5416GetRxFilter(struct ath_hal *ah); extern void ar5416SetRxFilter(struct ath_hal *ah, uint32_t bits); extern void ar5416StartPcuReceive(struct ath_hal *ah); extern void ar5416StopPcuReceive(struct ath_hal *ah); extern HAL_BOOL ar5416SetupRxDesc(struct ath_hal *, struct ath_desc *, uint32_t size, u_int flags); extern HAL_STATUS ar5416ProcRxDesc(struct ath_hal *ah, struct ath_desc *, uint32_t, struct ath_desc *, uint64_t, struct ath_rx_status *); extern HAL_BOOL ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode, struct ieee80211_channel *chan, HAL_BOOL bChannelChange, HAL_STATUS *status); extern HAL_BOOL ar5416PhyDisable(struct ath_hal *ah); extern HAL_RFGAIN ar5416GetRfgain(struct ath_hal *ah); extern HAL_BOOL ar5416Disable(struct ath_hal *ah); extern HAL_BOOL ar5416ChipReset(struct ath_hal *ah, const struct ieee80211_channel *); extern int ar5416GetRegChainOffset(struct ath_hal *ah, int i); extern HAL_BOOL ar5416SetBoardValues(struct ath_hal *, const struct ieee80211_channel *); extern HAL_BOOL ar5416SetResetReg(struct ath_hal *, uint32_t type); extern HAL_BOOL ar5416SetTxPowerLimit(struct ath_hal *ah, uint32_t limit); extern HAL_BOOL ar5416SetTransmitPower(struct ath_hal *, const struct ieee80211_channel *, uint16_t *); extern HAL_BOOL ar5416GetChipPowerLimits(struct ath_hal *ah, struct ieee80211_channel *chan); extern void ar5416GetChannelCenters(struct ath_hal *, const struct ieee80211_channel *chan, CHAN_CENTERS *centers); extern void ar5416SetRatesArrayFromTargetPower(struct ath_hal *ah, const struct ieee80211_channel *chan, int16_t *ratesArray, const CAL_TARGET_POWER_LEG *targetPowerCck, const CAL_TARGET_POWER_LEG *targetPowerCckExt, const CAL_TARGET_POWER_LEG *targetPowerOfdm, const CAL_TARGET_POWER_LEG *targetPowerOfdmExt, const CAL_TARGET_POWER_HT *targetPowerHt20, const CAL_TARGET_POWER_HT *targetPowerHt40); extern void ar5416GetTargetPowers(struct ath_hal *ah, const struct ieee80211_channel *chan, CAL_TARGET_POWER_HT *powInfo, uint16_t numChannels, CAL_TARGET_POWER_HT *pNewPower, uint16_t numRates, HAL_BOOL isHt40Target); extern void ar5416GetTargetPowersLeg(struct ath_hal *ah, const struct ieee80211_channel *chan, CAL_TARGET_POWER_LEG *powInfo, uint16_t numChannels, CAL_TARGET_POWER_LEG *pNewPower, uint16_t numRates, HAL_BOOL isExtTarget); extern void ar5416InitChainMasks(struct ath_hal *ah); extern void ar5416RestoreChainMask(struct ath_hal *ah); extern void ar5416EepromSetAddac(struct ath_hal *ah, const struct ieee80211_channel *chan); extern uint16_t ar5416GetMaxEdgePower(uint16_t freq, CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz); extern void ar5416InitPLL(struct ath_hal *ah, const struct ieee80211_channel *chan); /* TX power setup related routines in ar5416_reset.c */ extern void ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, const struct ieee80211_channel *chan, CAL_DATA_PER_FREQ *pRawDataSet, uint8_t * bChans, uint16_t availPiers, uint16_t tPdGainOverlap, int16_t *pMinCalPower, uint16_t * pPdGainBoundaries, uint8_t * pPDADCValues, uint16_t numXpdGains); extern void ar5416SetGainBoundariesClosedLoop(struct ath_hal *ah, int i, uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[]); extern uint16_t ar5416GetXpdGainValues(struct ath_hal *ah, uint16_t xpdMask, uint16_t xpdGainValues[]); extern void ar5416WriteDetectorGainBiases(struct ath_hal *ah, uint16_t numXpdGain, uint16_t xpdGainValues[]); extern void ar5416WritePdadcValues(struct ath_hal *ah, int i, uint8_t pdadcValues[]); extern HAL_BOOL ar5416SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset); extern void ar5416WriteTxPowerRateRegisters(struct ath_hal *ah, const struct ieee80211_channel *chan, const int16_t ratesArray[]); extern HAL_BOOL ar5416StopTxDma(struct ath_hal *ah, u_int q); extern HAL_BOOL ar5416SetupTxDesc(struct ath_hal *ah, struct ath_desc *ds, u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int txPower, u_int txRate0, u_int txTries0, u_int keyIx, u_int antMode, u_int flags, u_int rtsctsRate, u_int rtsctsDuration, u_int compicvLen, u_int compivLen, u_int comp); extern HAL_BOOL ar5416SetupXTxDesc(struct ath_hal *, struct ath_desc *, u_int txRate1, u_int txRetries1, u_int txRate2, u_int txRetries2, u_int txRate3, u_int txRetries3); extern HAL_BOOL ar5416FillTxDesc(struct ath_hal *ah, struct ath_desc *ds, u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg, const struct ath_desc *ds0); extern HAL_STATUS ar5416ProcTxDesc(struct ath_hal *ah, struct ath_desc *, struct ath_tx_status *); extern HAL_BOOL ar5416GetTxCompletionRates(struct ath_hal *ah, const struct ath_desc *ds0, int *rates, int *tries); extern HAL_BOOL ar5416ResetTxQueue(struct ath_hal *ah, u_int q); extern int ar5416SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type, const HAL_TXQ_INFO *qInfo); extern HAL_BOOL ar5416ChainTxDesc(struct ath_hal *ah, struct ath_desc *ds, u_int flags, u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int keyIx, HAL_CIPHER cipher, uint8_t delims, u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg); extern HAL_BOOL ar5416SetupFirstTxDesc(struct ath_hal *ah, struct ath_desc *ds, u_int aggrLen, u_int flags, u_int txPower, u_int txRate0, u_int txTries0, u_int antMode, u_int rtsctsRate, u_int rtsctsDuration); extern HAL_BOOL ar5416SetupLastTxDesc(struct ath_hal *ah, struct ath_desc *ds, const struct ath_desc *ds0); extern HAL_BOOL ar5416SetGlobalTxTimeout(struct ath_hal *ah, u_int tu); extern u_int ar5416GetGlobalTxTimeout(struct ath_hal *ah); extern void ar5416Set11nRateScenario(struct ath_hal *ah, struct ath_desc *ds, u_int durUpdateEn, u_int rtsctsRate, HAL_11N_RATE_SERIES series[], u_int nseries, u_int flags); extern void ar5416Set11nAggrFirst(struct ath_hal *ah, struct ath_desc *ds, u_int aggrLen, u_int numDelims); extern void ar5416Set11nAggrMiddle(struct ath_hal *ah, struct ath_desc *ds, u_int numDelims); extern void ar5416Set11nAggrLast(struct ath_hal *ah, struct ath_desc *ds); extern void ar5416Clr11nAggr(struct ath_hal *ah, struct ath_desc *ds); extern void ar5416Set11nBurstDuration(struct ath_hal *ah, struct ath_desc *ds, u_int burstDuration); extern const HAL_RATE_TABLE *ar5416GetRateTable(struct ath_hal *, u_int mode); #endif /* _ATH_AR5416_H_ */ Index: user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c =================================================================== --- user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c (revision 225571) +++ user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c (revision 225572) @@ -1,913 +1,914 @@ /* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD$ */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_devid.h" #include "ah_eeprom_v14.h" #include "ar5416/ar5416.h" #include "ar5416/ar5416reg.h" #include "ar5416/ar5416phy.h" #include "ar5416/ar5416.ini" static void ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore); static void ar5416WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan); static void ar5416SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan); static void ar5416AniSetup(struct ath_hal *ah) { static const struct ar5212AniParams aniparams = { .maxNoiseImmunityLevel = 4, /* levels 0..4 */ .totalSizeDesired = { -55, -55, -55, -55, -62 }, .coarseHigh = { -14, -14, -14, -14, -12 }, .coarseLow = { -64, -64, -64, -64, -70 }, .firpwr = { -78, -78, -78, -78, -80 }, .maxSpurImmunityLevel = 2, .cycPwrThr1 = { 2, 4, 6 }, .maxFirstepLevel = 2, /* levels 0..2 */ .firstep = { 0, 4, 8 }, .ofdmTrigHigh = 500, .ofdmTrigLow = 200, .cckTrigHigh = 200, .cckTrigLow = 100, .rssiThrHigh = 40, .rssiThrLow = 7, .period = 100, }; /* NB: disable ANI noise immmunity for reliable RIFS rx */ AH5416(ah)->ah_ani_function &= ~(1 << HAL_ANI_NOISE_IMMUNITY_LEVEL); ar5416AniAttach(ah, &aniparams, &aniparams, AH_TRUE); } /* * AR5416 doesn't do OLC or temperature compensation. */ static void ar5416olcInit(struct ath_hal *ah) { } static void ar5416olcTempCompensation(struct ath_hal *ah) { } /* * Attach for an AR5416 part. */ void ar5416InitState(struct ath_hal_5416 *ahp5416, uint16_t devid, HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status) { struct ath_hal_5212 *ahp; struct ath_hal *ah; ahp = &ahp5416->ah_5212; ar5212InitState(ahp, devid, sc, st, sh, status); ah = &ahp->ah_priv.h; /* override 5212 methods for our needs */ ah->ah_magic = AR5416_MAGIC; ah->ah_getRateTable = ar5416GetRateTable; ah->ah_detach = ar5416Detach; /* Reset functions */ ah->ah_reset = ar5416Reset; ah->ah_phyDisable = ar5416PhyDisable; ah->ah_disable = ar5416Disable; ah->ah_configPCIE = ar5416ConfigPCIE; ah->ah_perCalibration = ar5416PerCalibration; ah->ah_perCalibrationN = ar5416PerCalibrationN, ah->ah_resetCalValid = ar5416ResetCalValid, ah->ah_setTxPowerLimit = ar5416SetTxPowerLimit; ah->ah_setTxPower = ar5416SetTransmitPower; ah->ah_setBoardValues = ar5416SetBoardValues; /* Transmit functions */ ah->ah_stopTxDma = ar5416StopTxDma; ah->ah_setupTxDesc = ar5416SetupTxDesc; ah->ah_setupXTxDesc = ar5416SetupXTxDesc; ah->ah_fillTxDesc = ar5416FillTxDesc; ah->ah_procTxDesc = ar5416ProcTxDesc; ah->ah_getTxCompletionRates = ar5416GetTxCompletionRates; ah->ah_setupTxQueue = ar5416SetupTxQueue; ah->ah_resetTxQueue = ar5416ResetTxQueue; /* Receive Functions */ ah->ah_getRxFilter = ar5416GetRxFilter; ah->ah_setRxFilter = ar5416SetRxFilter; ah->ah_startPcuReceive = ar5416StartPcuReceive; ah->ah_stopPcuReceive = ar5416StopPcuReceive; ah->ah_setupRxDesc = ar5416SetupRxDesc; ah->ah_procRxDesc = ar5416ProcRxDesc; ah->ah_rxMonitor = ar5416RxMonitor; ah->ah_aniPoll = ar5416AniPoll; ah->ah_procMibEvent = ar5416ProcessMibIntr; /* Misc Functions */ ah->ah_getCapability = ar5416GetCapability; ah->ah_getDiagState = ar5416GetDiagState; ah->ah_setLedState = ar5416SetLedState; ah->ah_gpioCfgOutput = ar5416GpioCfgOutput; ah->ah_gpioCfgInput = ar5416GpioCfgInput; ah->ah_gpioGet = ar5416GpioGet; ah->ah_gpioSet = ar5416GpioSet; ah->ah_gpioSetIntr = ar5416GpioSetIntr; ah->ah_resetTsf = ar5416ResetTsf; ah->ah_getRfGain = ar5416GetRfgain; ah->ah_setAntennaSwitch = ar5416SetAntennaSwitch; ah->ah_setDecompMask = ar5416SetDecompMask; ah->ah_setCoverageClass = ar5416SetCoverageClass; ah->ah_setQuiet = ar5416SetQuiet; ah->ah_resetKeyCacheEntry = ar5416ResetKeyCacheEntry; ah->ah_setKeyCacheEntry = ar5416SetKeyCacheEntry; /* DFS Functions */ ah->ah_enableDfs = ar5416EnableDfs; ah->ah_getDfsThresh = ar5416GetDfsThresh; ah->ah_procRadarEvent = ar5416ProcessRadarEvent; /* Power Management Functions */ ah->ah_setPowerMode = ar5416SetPowerMode; /* Beacon Management Functions */ ah->ah_setBeaconTimers = ar5416SetBeaconTimers; ah->ah_beaconInit = ar5416BeaconInit; ah->ah_setStationBeaconTimers = ar5416SetStaBeaconTimers; ah->ah_resetStationBeaconTimers = ar5416ResetStaBeaconTimers; /* 802.11n Functions */ ah->ah_chainTxDesc = ar5416ChainTxDesc; ah->ah_setupFirstTxDesc = ar5416SetupFirstTxDesc; ah->ah_setupLastTxDesc = ar5416SetupLastTxDesc; ah->ah_set11nRateScenario = ar5416Set11nRateScenario; ah->ah_set11nAggrFirst = ar5416Set11nAggrFirst; ah->ah_set11nAggrMiddle = ar5416Set11nAggrMiddle; ah->ah_set11nAggrLast = ar5416Set11nAggrLast; ah->ah_clr11nAggr = ar5416Clr11nAggr; ah->ah_set11nBurstDuration = ar5416Set11nBurstDuration; + ah->ah_get_mib_cycle_counts_pct = ar5416GetMibCycleCountsPct; ah->ah_get11nExtBusy = ar5416Get11nExtBusy; ah->ah_set11nMac2040 = ar5416Set11nMac2040; ah->ah_get11nRxClear = ar5416Get11nRxClear; ah->ah_set11nRxClear = ar5416Set11nRxClear; /* Interrupt functions */ ah->ah_isInterruptPending = ar5416IsInterruptPending; ah->ah_getPendingInterrupts = ar5416GetPendingInterrupts; ah->ah_setInterrupts = ar5416SetInterrupts; ahp->ah_priv.ah_getWirelessModes= ar5416GetWirelessModes; ahp->ah_priv.ah_eepromRead = ar5416EepromRead; #ifdef AH_SUPPORT_WRITE_EEPROM ahp->ah_priv.ah_eepromWrite = ar5416EepromWrite; #endif ahp->ah_priv.ah_getChipPowerLimits = ar5416GetChipPowerLimits; /* Internal ops */ AH5416(ah)->ah_writeIni = ar5416WriteIni; AH5416(ah)->ah_spurMitigate = ar5416SpurMitigate; /* Internal baseband ops */ AH5416(ah)->ah_initPLL = ar5416InitPLL; /* Internal calibration ops */ AH5416(ah)->ah_cal_initcal = ar5416InitCalHardware; /* Internal TX power control related operations */ AH5416(ah)->ah_olcInit = ar5416olcInit; AH5416(ah)->ah_olcTempCompensation = ar5416olcTempCompensation; AH5416(ah)->ah_setPowerCalTable = ar5416SetPowerCalTable; /* * Start by setting all Owl devices to 2x2 */ AH5416(ah)->ah_rx_chainmask = AR5416_DEFAULT_RXCHAINMASK; AH5416(ah)->ah_tx_chainmask = AR5416_DEFAULT_TXCHAINMASK; /* Enable all ANI functions to begin with */ AH5416(ah)->ah_ani_function = 0xffffffff; /* Set overridable ANI methods */ AH5212(ah)->ah_aniControl = ar5416AniControl; } uint32_t ar5416GetRadioRev(struct ath_hal *ah) { uint32_t val; int i; /* Read Radio Chip Rev Extract */ OS_REG_WRITE(ah, AR_PHY(0x36), 0x00007058); for (i = 0; i < 8; i++) OS_REG_WRITE(ah, AR_PHY(0x20), 0x00010000); val = (OS_REG_READ(ah, AR_PHY(256)) >> 24) & 0xff; val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4); return ath_hal_reverseBits(val, 8); } /* * Attach for an AR5416 part. */ static struct ath_hal * ar5416Attach(uint16_t devid, HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, HAL_STATUS *status) { struct ath_hal_5416 *ahp5416; struct ath_hal_5212 *ahp; struct ath_hal *ah; uint32_t val; HAL_STATUS ecode; HAL_BOOL rfStatus; HALDEBUG_G(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n", __func__, sc, (void*) st, (void*) sh); /* NB: memory is returned zero'd */ ahp5416 = ath_hal_malloc(sizeof (struct ath_hal_5416) + /* extra space for Owl 2.1/2.2 WAR */ sizeof(ar5416Addac) ); if (ahp5416 == AH_NULL) { HALDEBUG_G(AH_NULL, HAL_DEBUG_ANY, "%s: cannot allocate memory for state block\n", __func__); *status = HAL_ENOMEM; return AH_NULL; } ar5416InitState(ahp5416, devid, sc, st, sh, status); ahp = &ahp5416->ah_5212; ah = &ahp->ah_priv.h; if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) { /* reset chip */ HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n", __func__); ecode = HAL_EIO; goto bad; } if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n", __func__); ecode = HAL_EIO; goto bad; } /* Read Revisions from Chips before taking out of reset */ val = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID; AH_PRIVATE(ah)->ah_macVersion = val >> AR_SREV_ID_S; AH_PRIVATE(ah)->ah_macRev = val & AR_SREV_REVISION; AH_PRIVATE(ah)->ah_ispcie = (devid == AR5416_DEVID_PCIE); /* setup common ini data; rf backends handle remainder */ HAL_INI_INIT(&ahp->ah_ini_modes, ar5416Modes, 6); HAL_INI_INIT(&ahp->ah_ini_common, ar5416Common, 2); HAL_INI_INIT(&AH5416(ah)->ah_ini_bb_rfgain, ar5416BB_RfGain, 3); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank0, ar5416Bank0, 2); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank1, ar5416Bank1, 2); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank2, ar5416Bank2, 2); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank3, ar5416Bank3, 3); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank6, ar5416Bank6, 3); HAL_INI_INIT(&AH5416(ah)->ah_ini_bank7, ar5416Bank7, 2); HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar5416Addac, 2); if (! IS_5416V2_2(ah)) { /* Owl 2.1/2.0 */ ath_hal_printf(ah, "[ath] Enabling CLKDRV workaround for AR5416 < v2.2\n"); struct ini { uint32_t *data; /* NB: !const */ int rows, cols; }; /* override CLKDRV value */ OS_MEMCPY(&AH5416(ah)[1], ar5416Addac, sizeof(ar5416Addac)); AH5416(ah)->ah_ini_addac.data = (uint32_t *) &AH5416(ah)[1]; HAL_INI_VAL((struct ini *)&AH5416(ah)->ah_ini_addac, 31, 1) = 0; } HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar5416PciePhy, 2); ar5416AttachPCIE(ah); ecode = ath_hal_v14EepromAttach(ah); if (ecode != HAL_OK) goto bad; if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */ HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); ecode = HAL_EIO; goto bad; } AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID); if (!ar5212ChipTest(ah)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n", __func__); ecode = HAL_ESELFTEST; goto bad; } /* * Set correct Baseband to analog shift * setting to access analog chips. */ OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); /* Read Radio Chip Rev Extract */ AH_PRIVATE(ah)->ah_analog5GhzRev = ar5212GetRadioRev(ah); switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) { case AR_RAD5122_SREV_MAJOR: /* Fowl: 5G/2x2 */ case AR_RAD2122_SREV_MAJOR: /* Fowl: 2+5G/2x2 */ case AR_RAD2133_SREV_MAJOR: /* Fowl: 2G/3x3 */ case AR_RAD5133_SREV_MAJOR: /* Fowl: 2+5G/3x3 */ break; default: if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) { /* * When RF_Silen is used the analog chip is reset. * So when the system boots with radio switch off * the RF chip rev reads back as zero and we need * to use the mac+phy revs to set the radio rev. */ AH_PRIVATE(ah)->ah_analog5GhzRev = AR_RAD5133_SREV_MAJOR; break; } /* NB: silently accept anything in release code per Atheros */ #ifdef AH_DEBUG HALDEBUG(ah, HAL_DEBUG_ANY, "%s: 5G Radio Chip Rev 0x%02X is not supported by " "this driver\n", __func__, AH_PRIVATE(ah)->ah_analog5GhzRev); ecode = HAL_ENOTSUPP; goto bad; #endif } /* * Got everything we need now to setup the capabilities. */ if (!ar5416FillCapabilityInfo(ah)) { ecode = HAL_EEREAD; goto bad; } ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr); if (ecode != HAL_OK) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: error getting mac address from EEPROM\n", __func__); goto bad; } /* XXX How about the serial number ? */ /* Read Reg Domain */ AH_PRIVATE(ah)->ah_currentRD = ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL); AH_PRIVATE(ah)->ah_currentRDext = ath_hal_eepromGet(ah, AR_EEP_REGDMN_1, AH_NULL); /* * ah_miscMode is populated by ar5416FillCapabilityInfo() * starting from griffin. Set here to make sure that * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is * placed into hardware. */ if (ahp->ah_miscMode != 0) OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode); rfStatus = ar2133RfAttach(ah, &ecode); if (!rfStatus) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n", __func__, ecode); goto bad; } ar5416AniSetup(ah); /* Anti Noise Immunity */ AH5416(ah)->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_2GHZ; AH5416(ah)->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_2GHZ; AH5416(ah)->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_5416_2GHZ; AH5416(ah)->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_5GHZ; AH5416(ah)->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_5GHZ; AH5416(ah)->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_5416_5GHZ; ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist); HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__); return ah; bad: if (ahp) ar5416Detach((struct ath_hal *) ahp); if (status) *status = ecode; return AH_NULL; } void ar5416Detach(struct ath_hal *ah) { HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s:\n", __func__); HALASSERT(ah != AH_NULL); HALASSERT(ah->ah_magic == AR5416_MAGIC); /* Make sure that chip is awake before writing to it */ if (! ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) HALDEBUG(ah, HAL_DEBUG_UNMASKABLE, "%s: failed to wake up chip\n", __func__); ar5416AniDetach(ah); ar5212RfDetach(ah); ah->ah_disable(ah); ar5416SetPowerMode(ah, HAL_PM_FULL_SLEEP, AH_TRUE); ath_hal_eepromDetach(ah); ath_hal_free(ah); } void ar5416AttachPCIE(struct ath_hal *ah) { if (AH_PRIVATE(ah)->ah_ispcie) ath_hal_configPCIE(ah, AH_FALSE); else ath_hal_disablePCIE(ah); } static void ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore) { if (AH_PRIVATE(ah)->ah_ispcie && !restore) { ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0); OS_DELAY(1000); OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); OS_REG_WRITE(ah, AR_WA, AR_WA_DEFAULT); } } static void ar5416WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan) { u_int modesIndex, freqIndex; int regWrites = 0; /* Setup the indices for the next set of register array writes */ /* XXX Ignore 11n dynamic mode on the AR5416 for the moment */ if (IEEE80211_IS_CHAN_2GHZ(chan)) { freqIndex = 2; if (IEEE80211_IS_CHAN_HT40(chan)) modesIndex = 3; else if (IEEE80211_IS_CHAN_108G(chan)) modesIndex = 5; else modesIndex = 4; } else { freqIndex = 1; if (IEEE80211_IS_CHAN_HT40(chan) || IEEE80211_IS_CHAN_TURBO(chan)) modesIndex = 2; else modesIndex = 1; } /* Set correct Baseband to analog shift setting to access analog chips. */ OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); /* * Write addac shifts */ OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO); /* NB: only required for Sowl */ if (AR_SREV_SOWL(ah)) ar5416EepromSetAddac(ah, chan); regWrites = ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_addac, 1, regWrites); OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes, modesIndex, regWrites); regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common, 1, regWrites); /* XXX updated regWrites? */ AH5212(ah)->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites); } /* * Convert to baseband spur frequency given input channel frequency * and compute register settings below. */ static void ar5416SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan) { uint16_t freq = ath_hal_gethwchannel(ah, chan); static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 }; static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 }; static const int inc[4] = { 0, 100, 0, 0 }; int bb_spur = AR_NO_SPUR; int bin, cur_bin; int spur_freq_sd; int spur_delta_phase; int denominator; int upper, lower, cur_vit_mask; int tmp, new; int i; int8_t mask_m[123]; int8_t mask_p[123]; int8_t mask_amt; int tmp_mask; int cur_bb_spur; HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan); OS_MEMZERO(mask_m, sizeof(mask_m)); OS_MEMZERO(mask_p, sizeof(mask_p)); /* * Need to verify range +/- 9.5 for static ht20, otherwise spur * is out-of-band and can be ignored. */ /* XXX ath9k changes */ for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz); if (AR_NO_SPUR == cur_bb_spur) break; cur_bb_spur = cur_bb_spur - (freq * 10); if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { bb_spur = cur_bb_spur; break; } } if (AR_NO_SPUR == bb_spur) return; bin = bb_spur * 32; tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0)); new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), new); new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | AR_PHY_SPUR_REG_ENABLE_MASK_PPM | AR_PHY_SPUR_REG_MASK_RATE_SELECT | AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | SM(AR5416_SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); OS_REG_WRITE(ah, AR_PHY_SPUR_REG, new); /* * Should offset bb_spur by +/- 10 MHz for dynamic 2040 MHz * config, no offset for HT20. * spur_delta_phase = bb_spur/40 * 2**21 for static ht20, * /80 for dyn2040. */ spur_delta_phase = ((bb_spur * 524288) / 100) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; /* * in 11A mode the denominator of spur_freq_sd should be 40 and * it should be 44 in 11G */ denominator = IEEE80211_IS_CHAN_2GHZ(chan) ? 440 : 400; spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); OS_REG_WRITE(ah, AR_PHY_TIMING11, new); /* * ============================================ * pilot mask 1 [31:0] = +6..-26, no 0 bin * pilot mask 2 [19:0] = +26..+7 * * channel mask 1 [31:0] = +6..-26, no 0 bin * channel mask 2 [19:0] = +26..+7 */ //cur_bin = -26; cur_bin = -6000; upper = bin + 100; lower = bin - 100; for (i = 0; i < 4; i++) { int pilot_mask = 0; int chan_mask = 0; int bp = 0; for (bp = 0; bp < 30; bp++) { if ((cur_bin > lower) && (cur_bin < upper)) { pilot_mask = pilot_mask | 0x1 << bp; chan_mask = chan_mask | 0x1 << bp; } cur_bin += 100; } cur_bin += inc[i]; OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask); } /* ================================================= * viterbi mask 1 based on channel magnitude * four levels 0-3 * - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c) * [1 2 2 1] for -9.6 or [1 2 1] for +16 * - enable_mask_ppm, all bins move with freq * * - mask_select, 8 bits for rates (reg 67,0x990c) * - mask_rate_cntl, 8 bits for rates (reg 67,0x990c) * choose which mask to use mask or mask2 */ /* * viterbi mask 2 2nd set for per data rate puncturing * four levels 0-3 * - mask_select, 8 bits for rates (reg 67) * - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994) * [1 2 2 1] for -9.6 or [1 2 1] for +16 */ cur_vit_mask = 6100; upper = bin + 120; lower = bin - 120; for (i = 0; i < 123; i++) { if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { if ((abs(cur_vit_mask - bin)) < 75) { mask_amt = 1; } else { mask_amt = 0; } if (cur_vit_mask < 0) { mask_m[abs(cur_vit_mask / 100)] = mask_amt; } else { mask_p[cur_vit_mask / 100] = mask_amt; } } cur_vit_mask -= 100; } tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) | (mask_m[48] << 26) | (mask_m[49] << 24) | (mask_m[50] << 22) | (mask_m[51] << 20) | (mask_m[52] << 18) | (mask_m[53] << 16) | (mask_m[54] << 14) | (mask_m[55] << 12) | (mask_m[56] << 10) | (mask_m[57] << 8) | (mask_m[58] << 6) | (mask_m[59] << 4) | (mask_m[60] << 2) | (mask_m[61] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); tmp_mask = (mask_m[31] << 28) | (mask_m[32] << 26) | (mask_m[33] << 24) | (mask_m[34] << 22) | (mask_m[35] << 20) | (mask_m[36] << 18) | (mask_m[37] << 16) | (mask_m[48] << 14) | (mask_m[39] << 12) | (mask_m[40] << 10) | (mask_m[41] << 8) | (mask_m[42] << 6) | (mask_m[43] << 4) | (mask_m[44] << 2) | (mask_m[45] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) | (mask_m[18] << 26) | (mask_m[18] << 24) | (mask_m[20] << 22) | (mask_m[20] << 20) | (mask_m[22] << 18) | (mask_m[22] << 16) | (mask_m[24] << 14) | (mask_m[24] << 12) | (mask_m[25] << 10) | (mask_m[26] << 8) | (mask_m[27] << 6) | (mask_m[28] << 4) | (mask_m[29] << 2) | (mask_m[30] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28) | (mask_m[ 2] << 26) | (mask_m[ 3] << 24) | (mask_m[ 4] << 22) | (mask_m[ 5] << 20) | (mask_m[ 6] << 18) | (mask_m[ 7] << 16) | (mask_m[ 8] << 14) | (mask_m[ 9] << 12) | (mask_m[10] << 10) | (mask_m[11] << 8) | (mask_m[12] << 6) | (mask_m[13] << 4) | (mask_m[14] << 2) | (mask_m[15] << 0); OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); tmp_mask = (mask_p[15] << 28) | (mask_p[14] << 26) | (mask_p[13] << 24) | (mask_p[12] << 22) | (mask_p[11] << 20) | (mask_p[10] << 18) | (mask_p[ 9] << 16) | (mask_p[ 8] << 14) | (mask_p[ 7] << 12) | (mask_p[ 6] << 10) | (mask_p[ 5] << 8) | (mask_p[ 4] << 6) | (mask_p[ 3] << 4) | (mask_p[ 2] << 2) | (mask_p[ 1] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); tmp_mask = (mask_p[30] << 28) | (mask_p[29] << 26) | (mask_p[28] << 24) | (mask_p[27] << 22) | (mask_p[26] << 20) | (mask_p[25] << 18) | (mask_p[24] << 16) | (mask_p[23] << 14) | (mask_p[22] << 12) | (mask_p[21] << 10) | (mask_p[20] << 8) | (mask_p[19] << 6) | (mask_p[18] << 4) | (mask_p[17] << 2) | (mask_p[16] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); tmp_mask = (mask_p[45] << 28) | (mask_p[44] << 26) | (mask_p[43] << 24) | (mask_p[42] << 22) | (mask_p[41] << 20) | (mask_p[40] << 18) | (mask_p[39] << 16) | (mask_p[38] << 14) | (mask_p[37] << 12) | (mask_p[36] << 10) | (mask_p[35] << 8) | (mask_p[34] << 6) | (mask_p[33] << 4) | (mask_p[32] << 2) | (mask_p[31] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) | (mask_p[59] << 26) | (mask_p[58] << 24) | (mask_p[57] << 22) | (mask_p[56] << 20) | (mask_p[55] << 18) | (mask_p[54] << 16) | (mask_p[53] << 14) | (mask_p[52] << 12) | (mask_p[51] << 10) | (mask_p[50] << 8) | (mask_p[49] << 6) | (mask_p[48] << 4) | (mask_p[47] << 2) | (mask_p[46] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } /* * Fill all software cached or static hardware state information. * Return failure if capabilities are to come from EEPROM and * cannot be read. */ HAL_BOOL ar5416FillCapabilityInfo(struct ath_hal *ah) { struct ath_hal_private *ahpriv = AH_PRIVATE(ah); HAL_CAPABILITIES *pCap = &ahpriv->ah_caps; uint16_t val; /* Construct wireless mode from EEPROM */ pCap->halWirelessModes = 0; if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) { pCap->halWirelessModes |= HAL_MODE_11A | HAL_MODE_11NA_HT20 | HAL_MODE_11NA_HT40PLUS | HAL_MODE_11NA_HT40MINUS ; } if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE)) { pCap->halWirelessModes |= HAL_MODE_11G | HAL_MODE_11NG_HT20 | HAL_MODE_11NG_HT40PLUS | HAL_MODE_11NG_HT40MINUS ; pCap->halWirelessModes |= HAL_MODE_11A | HAL_MODE_11NA_HT20 | HAL_MODE_11NA_HT40PLUS | HAL_MODE_11NA_HT40MINUS ; } pCap->halLow2GhzChan = 2312; pCap->halHigh2GhzChan = 2732; pCap->halLow5GhzChan = 4915; pCap->halHigh5GhzChan = 6100; pCap->halCipherCkipSupport = AH_FALSE; pCap->halCipherTkipSupport = AH_TRUE; pCap->halCipherAesCcmSupport = ath_hal_eepromGetFlag(ah, AR_EEP_AES); pCap->halMicCkipSupport = AH_FALSE; pCap->halMicTkipSupport = AH_TRUE; pCap->halMicAesCcmSupport = ath_hal_eepromGetFlag(ah, AR_EEP_AES); /* * Starting with Griffin TX+RX mic keys can be combined * in one key cache slot. */ pCap->halTkipMicTxRxKeySupport = AH_TRUE; pCap->halChanSpreadSupport = AH_TRUE; pCap->halSleepAfterBeaconBroken = AH_TRUE; pCap->halCompressSupport = AH_FALSE; pCap->halBurstSupport = AH_TRUE; pCap->halFastFramesSupport = AH_FALSE; /* XXX? */ pCap->halChapTuningSupport = AH_TRUE; pCap->halTurboPrimeSupport = AH_TRUE; pCap->halTurboGSupport = pCap->halWirelessModes & HAL_MODE_108G; pCap->halPSPollBroken = AH_TRUE; /* XXX fixed in later revs? */ pCap->halVEOLSupport = AH_TRUE; pCap->halBssIdMaskSupport = AH_TRUE; pCap->halMcastKeySrchSupport = AH_TRUE; /* Works on AR5416 and later */ pCap->halTsfAddSupport = AH_TRUE; pCap->hal4AddrAggrSupport = AH_FALSE; /* Broken in Owl */ if (ath_hal_eepromGet(ah, AR_EEP_MAXQCU, &val) == HAL_OK) pCap->halTotalQueues = val; else pCap->halTotalQueues = HAL_NUM_TX_QUEUES; if (ath_hal_eepromGet(ah, AR_EEP_KCENTRIES, &val) == HAL_OK) pCap->halKeyCacheSize = val; else pCap->halKeyCacheSize = AR5416_KEYTABLE_SIZE; /* XXX not needed */ pCap->halChanHalfRate = AH_FALSE; /* XXX ? */ pCap->halChanQuarterRate = AH_FALSE; /* XXX ? */ pCap->halTstampPrecision = 32; pCap->halHwPhyCounterSupport = AH_TRUE; pCap->halIntrMask = HAL_INT_COMMON | HAL_INT_RX | HAL_INT_TX | HAL_INT_FATAL | HAL_INT_BNR | HAL_INT_BMISC | HAL_INT_DTIMSYNC | HAL_INT_TSFOOR | HAL_INT_CST | HAL_INT_GTT ; pCap->halFastCCSupport = AH_TRUE; pCap->halNumGpioPins = 6; pCap->halWowSupport = AH_FALSE; pCap->halWowMatchPatternExact = AH_FALSE; pCap->halBtCoexSupport = AH_FALSE; /* XXX need support */ pCap->halAutoSleepSupport = AH_FALSE; pCap->hal4kbSplitTransSupport = AH_TRUE; /* Disable this so Block-ACK works correctly */ pCap->halHasRxSelfLinkedTail = AH_FALSE; #if 0 /* XXX not yet */ pCap->halNumAntCfg2GHz = ar5416GetNumAntConfig(ahp, HAL_FREQ_BAND_2GHZ); pCap->halNumAntCfg5GHz = ar5416GetNumAntConfig(ahp, HAL_FREQ_BAND_5GHZ); #endif pCap->halHTSupport = AH_TRUE; pCap->halTxChainMask = ath_hal_eepromGet(ah, AR_EEP_TXMASK, AH_NULL); /* XXX CB71 uses GPIO 0 to indicate 3 rx chains */ pCap->halRxChainMask = ath_hal_eepromGet(ah, AR_EEP_RXMASK, AH_NULL); /* AR5416 may have 3 antennas but is a 2x2 stream device */ pCap->halTxStreams = 2; pCap->halRxStreams = 2; pCap->halRtsAggrLimit = 8*1024; /* Owl 2.0 limit */ pCap->halMbssidAggrSupport = AH_FALSE; /* Broken on Owl */ pCap->halForcePpmSupport = AH_TRUE; pCap->halEnhancedPmSupport = AH_TRUE; pCap->halBssidMatchSupport = AH_TRUE; pCap->halGTTSupport = AH_TRUE; pCap->halCSTSupport = AH_TRUE; pCap->halEnhancedDfsSupport = AH_FALSE; if (ath_hal_eepromGetFlag(ah, AR_EEP_RFKILL) && ath_hal_eepromGet(ah, AR_EEP_RFSILENT, &ahpriv->ah_rfsilent) == HAL_OK) { /* NB: enabled by default */ ahpriv->ah_rfkillEnabled = AH_TRUE; pCap->halRfSilentSupport = AH_TRUE; } ahpriv->ah_rxornIsFatal = AH_FALSE; return AH_TRUE; } static const char* ar5416Probe(uint16_t vendorid, uint16_t devid) { if (vendorid == ATHEROS_VENDOR_ID && (devid == AR5416_DEVID_PCI || devid == AR5416_DEVID_PCIE)) return "Atheros 5416"; return AH_NULL; } AH_CHIP(AR5416, ar5416Probe, ar5416Attach); Index: user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_misc.c =================================================================== --- user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_misc.c (revision 225571) +++ user/adrian/if_ath_tx/sys/dev/ath/ath_hal/ar5416/ar5416_misc.c (revision 225572) @@ -1,735 +1,786 @@ /* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD$ */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_devid.h" #ifdef AH_DEBUG #include "ah_desc.h" /* NB: for HAL_PHYERR* */ #endif #include "ar5416/ar5416.h" #include "ar5416/ar5416reg.h" #include "ar5416/ar5416phy.h" /* * Return the wireless modes (a,b,g,n,t) supported by hardware. * * This value is what is actually supported by the hardware * and is unaffected by regulatory/country code settings. * */ u_int ar5416GetWirelessModes(struct ath_hal *ah) { u_int mode; struct ath_hal_private *ahpriv = AH_PRIVATE(ah); HAL_CAPABILITIES *pCap = &ahpriv->ah_caps; mode = ar5212GetWirelessModes(ah); /* Only enable HT modes if the NIC supports HT */ if (pCap->halHTSupport == AH_TRUE && (mode & HAL_MODE_11A)) mode |= HAL_MODE_11NA_HT20 | HAL_MODE_11NA_HT40PLUS | HAL_MODE_11NA_HT40MINUS ; if (pCap->halHTSupport == AH_TRUE && (mode & HAL_MODE_11G)) mode |= HAL_MODE_11NG_HT20 | HAL_MODE_11NG_HT40PLUS | HAL_MODE_11NG_HT40MINUS ; return mode; } /* * Change the LED blinking pattern to correspond to the connectivity */ void ar5416SetLedState(struct ath_hal *ah, HAL_LED_STATE state) { static const uint32_t ledbits[8] = { AR_MAC_LED_ASSOC_NONE, /* HAL_LED_INIT */ AR_MAC_LED_ASSOC_PEND, /* HAL_LED_SCAN */ AR_MAC_LED_ASSOC_PEND, /* HAL_LED_AUTH */ AR_MAC_LED_ASSOC_ACTIVE, /* HAL_LED_ASSOC*/ AR_MAC_LED_ASSOC_ACTIVE, /* HAL_LED_RUN */ AR_MAC_LED_ASSOC_NONE, AR_MAC_LED_ASSOC_NONE, AR_MAC_LED_ASSOC_NONE, }; uint32_t bits; if (AR_SREV_HOWL(ah)) return; bits = OS_REG_READ(ah, AR_MAC_LED); bits = (bits &~ AR_MAC_LED_MODE) | SM(AR_MAC_LED_MODE_POWON, AR_MAC_LED_MODE) #if 1 | SM(AR_MAC_LED_MODE_NETON, AR_MAC_LED_MODE) #endif ; bits = (bits &~ AR_MAC_LED_ASSOC) | SM(ledbits[state & 0x7], AR_MAC_LED_ASSOC); OS_REG_WRITE(ah, AR_MAC_LED, bits); } /* * Reset the current hardware tsf for stamlme. */ void ar5416ResetTsf(struct ath_hal *ah) { uint32_t v; int i; for (i = 0; i < 10; i++) { v = OS_REG_READ(ah, AR_SLP32_MODE); if ((v & AR_SLP32_TSF_WRITE_STATUS) == 0) break; OS_DELAY(10); } OS_REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE); } HAL_BOOL ar5416SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings) { return AH_TRUE; } /* Setup decompression for given key index */ HAL_BOOL ar5416SetDecompMask(struct ath_hal *ah, uint16_t keyidx, int en) { return HAL_OK; } /* Setup coverage class */ void ar5416SetCoverageClass(struct ath_hal *ah, uint8_t coverageclass, int now) { AH_PRIVATE(ah)->ah_coverageClass = coverageclass; } /* + * Return the busy for rx_frame, rx_clear, and tx_frame + */ +uint32_t +ar5416GetMibCycleCountsPct(struct ath_hal *ah, uint32_t *rxc_pcnt, + uint32_t *extc_pcnt, uint32_t *rxf_pcnt, uint32_t *txf_pcnt) +{ + struct ath_hal_5416 *ahp = AH5416(ah); + u_int32_t good = 1; + + /* XXX freeze/unfreeze mib counters */ + uint32_t rc = OS_REG_READ(ah, AR_RCCNT); + uint32_t ec = OS_REG_READ(ah, AR_EXTRCCNT); + uint32_t rf = OS_REG_READ(ah, AR_RFCNT); + uint32_t tf = OS_REG_READ(ah, AR_TFCNT); + uint32_t cc = OS_REG_READ(ah, AR_CCCNT); /* read cycles last */ + + if (ahp->ah_cycleCount == 0 || ahp->ah_cycleCount > cc) { + /* + * Cycle counter wrap (or initial call); it's not possible + * to accurately calculate a value because the registers + * right shift rather than wrap--so punt and return 0. + */ + HALDEBUG(ah, HAL_DEBUG_ANY, + "%s: cycle counter wrap. ExtBusy = 0\n", __func__); + good = 0; + } else { + uint32_t cc_d = cc - ahp->ah_cycleCount; + uint32_t rc_d = rc - ahp->ah_ctlBusy; + uint32_t ec_d = ec - ahp->ah_extBusy; + uint32_t rf_d = rf - ahp->ah_rxBusy; + uint32_t tf_d = tf - ahp->ah_txBusy; + + if (cc_d != 0) { + *rxc_pcnt = rc_d * 100 / cc_d; + *rxf_pcnt = rf_d * 100 / cc_d; + *txf_pcnt = tf_d * 100 / cc_d; + *extc_pcnt = ec_d * 100 / cc_d; + } else { + good = 0; + } + } + ahp->ah_cycleCount = cc; + ahp->ah_rxBusy = rf; + ahp->ah_ctlBusy = rc; + ahp->ah_txBusy = tf; + ahp->ah_extBusy = ec; + + return good; +} + +/* * Return approximation of extension channel busy over an time interval * 0% (clear) -> 100% (busy) * */ uint32_t ar5416Get11nExtBusy(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); uint32_t busy; /* percentage */ uint32_t cycleCount, ctlBusy, extBusy; ctlBusy = OS_REG_READ(ah, AR_RCCNT); extBusy = OS_REG_READ(ah, AR_EXTRCCNT); cycleCount = OS_REG_READ(ah, AR_CCCNT); if (ahp->ah_cycleCount == 0 || ahp->ah_cycleCount > cycleCount) { /* * Cycle counter wrap (or initial call); it's not possible * to accurately calculate a value because the registers * right shift rather than wrap--so punt and return 0. */ busy = 0; HALDEBUG(ah, HAL_DEBUG_ANY, "%s: cycle counter wrap. ExtBusy = 0\n", __func__); } else { uint32_t cycleDelta = cycleCount - ahp->ah_cycleCount; uint32_t ctlBusyDelta = ctlBusy - ahp->ah_ctlBusy; uint32_t extBusyDelta = extBusy - ahp->ah_extBusy; uint32_t ctlClearDelta = 0; /* Compute control channel rxclear. * The cycle delta may be less than the control channel delta. * This could be solved by freezing the timers (or an atomic read, * if one was available). Checking for the condition should be * sufficient. */ if (cycleDelta > ctlBusyDelta) { ctlClearDelta = cycleDelta - ctlBusyDelta; } /* Compute ratio of extension channel busy to control channel clear * as an approximation to extension channel cleanliness. * * According to the hardware folks, ext rxclear is undefined * if the ctrl rxclear is de-asserted (i.e. busy) */ if (ctlClearDelta) { busy = (extBusyDelta * 100) / ctlClearDelta; } else { busy = 100; } if (busy > 100) { busy = 100; } #if 0 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: cycleDelta 0x%x, ctlBusyDelta 0x%x, " "extBusyDelta 0x%x, ctlClearDelta 0x%x, " "busy %d\n", __func__, cycleDelta, ctlBusyDelta, extBusyDelta, ctlClearDelta, busy); #endif } ahp->ah_cycleCount = cycleCount; ahp->ah_ctlBusy = ctlBusy; ahp->ah_extBusy = extBusy; return busy; } /* * Configure 20/40 operation * * 20/40 = joint rx clear (control and extension) * 20 = rx clear (control) * * - NOTE: must stop MAC (tx) and requeue 40 MHz packets as 20 MHz when changing * from 20/40 => 20 only */ void ar5416Set11nMac2040(struct ath_hal *ah, HAL_HT_MACMODE mode) { uint32_t macmode; /* Configure MAC for 20/40 operation */ if (mode == HAL_HT_MACMODE_2040) { macmode = AR_2040_JOINED_RX_CLEAR; } else { macmode = 0; } OS_REG_WRITE(ah, AR_2040_MODE, macmode); } /* * Get Rx clear (control/extension channel) * * Returns active low (busy) for ctrl/ext channel * Owl 2.0 */ HAL_HT_RXCLEAR ar5416Get11nRxClear(struct ath_hal *ah) { HAL_HT_RXCLEAR rxclear = 0; uint32_t val; val = OS_REG_READ(ah, AR_DIAG_SW); /* control channel */ if (val & AR_DIAG_RXCLEAR_CTL_LOW) { rxclear |= HAL_RX_CLEAR_CTL_LOW; } /* extension channel */ if (val & AR_DIAG_RXCLEAR_CTL_LOW) { rxclear |= HAL_RX_CLEAR_EXT_LOW; } return rxclear; } /* * Set Rx clear (control/extension channel) * * Useful for forcing the channel to appear busy for * debugging/diagnostics * Owl 2.0 */ void ar5416Set11nRxClear(struct ath_hal *ah, HAL_HT_RXCLEAR rxclear) { /* control channel */ if (rxclear & HAL_RX_CLEAR_CTL_LOW) { OS_REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RXCLEAR_CTL_LOW); } else { OS_REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RXCLEAR_CTL_LOW); } /* extension channel */ if (rxclear & HAL_RX_CLEAR_EXT_LOW) { OS_REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RXCLEAR_EXT_LOW); } else { OS_REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RXCLEAR_EXT_LOW); } } /* XXX shouldn't be here! */ #define TU_TO_USEC(_tu) ((_tu) << 10) HAL_STATUS ar5416SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration, uint32_t nextStart, HAL_QUIET_FLAG flag) { uint32_t period_us = TU_TO_USEC(period); /* convert to us unit */ uint32_t nextStart_us = TU_TO_USEC(nextStart); /* convert to us unit */ if (flag & HAL_QUIET_ENABLE) { if ((!nextStart) || (flag & HAL_QUIET_ADD_CURRENT_TSF)) { /* Add the nextStart offset to the current TSF */ nextStart_us += OS_REG_READ(ah, AR_TSF_L32); } if (flag & HAL_QUIET_ADD_SWBA_RESP_TIME) { nextStart_us += ah->ah_config.ah_sw_beacon_response_time; } OS_REG_RMW_FIELD(ah, AR_QUIET1, AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1); OS_REG_WRITE(ah, AR_QUIET2, SM(duration, AR_QUIET2_QUIET_DUR)); OS_REG_WRITE(ah, AR_QUIET_PERIOD, period_us); OS_REG_WRITE(ah, AR_NEXT_QUIET, nextStart_us); OS_REG_SET_BIT(ah, AR_TIMER_MODE, AR_TIMER_MODE_QUIET); } else { OS_REG_CLR_BIT(ah, AR_TIMER_MODE, AR_TIMER_MODE_QUIET); } return HAL_OK; } #undef TU_TO_USEC HAL_STATUS ar5416GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type, uint32_t capability, uint32_t *result) { switch (type) { case HAL_CAP_BB_HANG: switch (capability) { case HAL_BB_HANG_RIFS: return (AR_SREV_HOWL(ah) || AR_SREV_SOWL(ah)) ? HAL_OK : HAL_ENOTSUPP; case HAL_BB_HANG_DFS: return (AR_SREV_HOWL(ah) || AR_SREV_SOWL(ah)) ? HAL_OK : HAL_ENOTSUPP; case HAL_BB_HANG_RX_CLEAR: return AR_SREV_MERLIN(ah) ? HAL_OK : HAL_ENOTSUPP; } break; case HAL_CAP_MAC_HANG: return ((ah->ah_macVersion == AR_XSREV_VERSION_OWL_PCI) || (ah->ah_macVersion == AR_XSREV_VERSION_OWL_PCIE) || AR_SREV_HOWL(ah) || AR_SREV_SOWL(ah)) ? HAL_OK : HAL_ENOTSUPP; case HAL_CAP_DIVERSITY: /* disable classic fast diversity */ return HAL_ENXIO; default: break; } return ar5212GetCapability(ah, type, capability, result); } static int ar5416DetectMacHang(struct ath_hal *ah); static int ar5416DetectBBHang(struct ath_hal *ah); HAL_BOOL ar5416GetDiagState(struct ath_hal *ah, int request, const void *args, uint32_t argsize, void **result, uint32_t *resultsize) { struct ath_hal_5416 *ahp = AH5416(ah); int hangs; if (ath_hal_getdiagstate(ah, request, args, argsize, result, resultsize)) return AH_TRUE; switch (request) { case HAL_DIAG_EEPROM: return ath_hal_eepromDiag(ah, request, args, argsize, result, resultsize); case HAL_DIAG_CHECK_HANGS: if (argsize != sizeof(int)) return AH_FALSE; hangs = *(const int *) args; ahp->ah_hangs = 0; if (hangs & HAL_BB_HANGS) ahp->ah_hangs |= ar5416DetectBBHang(ah); /* NB: if BB is hung MAC will be hung too so skip check */ if (ahp->ah_hangs == 0 && (hangs & HAL_MAC_HANGS)) ahp->ah_hangs |= ar5416DetectMacHang(ah); *result = &ahp->ah_hangs; *resultsize = sizeof(ahp->ah_hangs); return AH_TRUE; } return ar5212GetDiagState(ah, request, args, argsize, result, resultsize); } typedef struct { uint32_t dma_dbg_3; uint32_t dma_dbg_4; uint32_t dma_dbg_5; uint32_t dma_dbg_6; } mac_dbg_regs_t; typedef enum { dcu_chain_state = 0x1, dcu_complete_state = 0x2, qcu_state = 0x4, qcu_fsp_ok = 0x8, qcu_fsp_state = 0x10, qcu_stitch_state = 0x20, qcu_fetch_state = 0x40, qcu_complete_state = 0x80 } hal_mac_hangs_t; typedef struct { int states; uint8_t dcu_chain_state; uint8_t dcu_complete_state; uint8_t qcu_state; uint8_t qcu_fsp_ok; uint8_t qcu_fsp_state; uint8_t qcu_stitch_state; uint8_t qcu_fetch_state; uint8_t qcu_complete_state; } hal_mac_hang_check_t; HAL_BOOL ar5416SetRifsDelay(struct ath_hal *ah, const struct ieee80211_channel *chan, HAL_BOOL enable) { uint32_t val; HAL_BOOL is_chan_2g = AH_FALSE; HAL_BOOL is_ht40 = AH_FALSE; if (chan) is_chan_2g = IEEE80211_IS_CHAN_2GHZ(chan); if (chan) is_ht40 = IEEE80211_IS_CHAN_HT40(chan); /* Only support disabling RIFS delay for now */ HALASSERT(enable == AH_FALSE); if (enable == AH_TRUE) return AH_FALSE; /* Change RIFS init delay to 0 */ val = OS_REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS); val &= ~AR_PHY_RIFS_INIT_DELAY; OS_REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val); /* * For Owl, RIFS RX parameters are controlled differently; * it isn't enabled in the inivals by default. * * For Sowl/Howl, RIFS RX is enabled in the inivals by default; * the following code sets them back to non-RIFS values. * * For > Sowl/Howl, RIFS RX can be left on by default and so * this function shouldn't be called. */ if ((! AR_SREV_SOWL(ah)) && (! AR_SREV_HOWL(ah))) return AH_TRUE; /* Reset search delay to default values */ if (is_chan_2g) if (is_ht40) OS_REG_WRITE(ah, AR_PHY_SEARCH_START_DELAY, 0x268); else OS_REG_WRITE(ah, AR_PHY_SEARCH_START_DELAY, 0x134); else if (is_ht40) OS_REG_WRITE(ah, AR_PHY_SEARCH_START_DELAY, 0x370); else OS_REG_WRITE(ah, AR_PHY_SEARCH_START_DELAY, 0x1b8); return AH_TRUE; } static HAL_BOOL ar5416CompareDbgHang(struct ath_hal *ah, const mac_dbg_regs_t *regs, const hal_mac_hang_check_t *check) { int found_states; found_states = 0; if (check->states & dcu_chain_state) { int i; for (i = 0; i < 6; i++) { if (((regs->dma_dbg_4 >> (5*i)) & 0x1f) == check->dcu_chain_state) found_states |= dcu_chain_state; } for (i = 0; i < 4; i++) { if (((regs->dma_dbg_5 >> (5*i)) & 0x1f) == check->dcu_chain_state) found_states |= dcu_chain_state; } } if (check->states & dcu_complete_state) { if ((regs->dma_dbg_6 & 0x3) == check->dcu_complete_state) found_states |= dcu_complete_state; } if (check->states & qcu_stitch_state) { if (((regs->dma_dbg_3 >> 18) & 0xf) == check->qcu_stitch_state) found_states |= qcu_stitch_state; } if (check->states & qcu_fetch_state) { if (((regs->dma_dbg_3 >> 22) & 0xf) == check->qcu_fetch_state) found_states |= qcu_fetch_state; } if (check->states & qcu_complete_state) { if (((regs->dma_dbg_3 >> 26) & 0x7) == check->qcu_complete_state) found_states |= qcu_complete_state; } return (found_states == check->states); } #define NUM_STATUS_READS 50 static int ar5416DetectMacHang(struct ath_hal *ah) { static const hal_mac_hang_check_t hang_sig1 = { .dcu_chain_state = 0x6, .dcu_complete_state = 0x1, .states = dcu_chain_state | dcu_complete_state, }; static const hal_mac_hang_check_t hang_sig2 = { .qcu_stitch_state = 0x9, .qcu_fetch_state = 0x8, .qcu_complete_state = 0x4, .states = qcu_stitch_state | qcu_fetch_state | qcu_complete_state, }; mac_dbg_regs_t mac_dbg; int i; mac_dbg.dma_dbg_3 = OS_REG_READ(ah, AR_DMADBG_3); mac_dbg.dma_dbg_4 = OS_REG_READ(ah, AR_DMADBG_4); mac_dbg.dma_dbg_5 = OS_REG_READ(ah, AR_DMADBG_5); mac_dbg.dma_dbg_6 = OS_REG_READ(ah, AR_DMADBG_6); for (i = 1; i <= NUM_STATUS_READS; i++) { if (mac_dbg.dma_dbg_3 != OS_REG_READ(ah, AR_DMADBG_3) || mac_dbg.dma_dbg_4 != OS_REG_READ(ah, AR_DMADBG_4) || mac_dbg.dma_dbg_5 != OS_REG_READ(ah, AR_DMADBG_5) || mac_dbg.dma_dbg_6 != OS_REG_READ(ah, AR_DMADBG_6)) return 0; } if (ar5416CompareDbgHang(ah, &mac_dbg, &hang_sig1)) return HAL_MAC_HANG_SIG1; if (ar5416CompareDbgHang(ah, &mac_dbg, &hang_sig2)) return HAL_MAC_HANG_SIG2; HALDEBUG(ah, HAL_DEBUG_HANG, "%s Found an unknown MAC hang signature " "DMADBG_3=0x%x DMADBG_4=0x%x DMADBG_5=0x%x DMADBG_6=0x%x\n", __func__, mac_dbg.dma_dbg_3, mac_dbg.dma_dbg_4, mac_dbg.dma_dbg_5, mac_dbg.dma_dbg_6); return 0; } /* * Determine if the baseband using the Observation Bus Register */ static int ar5416DetectBBHang(struct ath_hal *ah) { #define N(a) (sizeof(a)/sizeof(a[0])) /* * Check the PCU Observation Bus 1 register (0x806c) * NUM_STATUS_READS times * * 4 known BB hang signatures - * [1] bits 8,9,11 are 0. State machine state (bits 25-31) is 0x1E * [2] bits 8,9 are 1, bit 11 is 0. State machine state * (bits 25-31) is 0x52 * [3] bits 8,9 are 1, bit 11 is 0. State machine state * (bits 25-31) is 0x18 * [4] bit 10 is 1, bit 11 is 0. WEP state (bits 12-17) is 0x2, * Rx State (bits 20-24) is 0x7. */ static const struct { uint32_t val; uint32_t mask; int code; } hang_list[] = { /* Reg Value Reg Mask Hang Code XXX */ { 0x1E000000, 0x7E000B00, HAL_BB_HANG_DFS }, { 0x52000B00, 0x7E000B00, HAL_BB_HANG_RIFS }, { 0x18000B00, 0x7E000B00, HAL_BB_HANG_RX_CLEAR }, { 0x00702400, 0x7E7FFFEF, HAL_BB_HANG_RX_CLEAR }, { 0x18002313, 0x7EF3FFFF, HAL_BB_HANG_RX_CLEAR }, { 0x00902400, 0x5DF3FFEE, HAL_BB_HANG_RX_CLEAR }, }; uint32_t hang_sig; int i; hang_sig = OS_REG_READ(ah, AR_OBSERV_1); for (i = 1; i <= NUM_STATUS_READS; i++) { if (hang_sig != OS_REG_READ(ah, AR_OBSERV_1)) return 0; } for (i = 0; i < N(hang_list); i++) if ((hang_sig & hang_list[i].mask) == hang_list[i].val) { HALDEBUG(ah, HAL_DEBUG_HANG, "%s BB hang, signature 0x%x, code 0x%x\n", __func__, hang_sig, hang_list[i].code); return hang_list[i].code; } HALDEBUG(ah, HAL_DEBUG_HANG, "%s Found an unknown BB hang signature! " "<0x806c>=0x%x\n", __func__, hang_sig); return 0; #undef N } #undef NUM_STATUS_READS /* * Get the radar parameter values and return them in the pe * structure */ void ar5416GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe) { uint32_t val, temp; val = OS_REG_READ(ah, AR_PHY_RADAR_0); temp = MS(val,AR_PHY_RADAR_0_FIRPWR); temp |= 0xFFFFFF80; pe->pe_firpwr = temp; pe->pe_rrssi = MS(val, AR_PHY_RADAR_0_RRSSI); pe->pe_height = MS(val, AR_PHY_RADAR_0_HEIGHT); pe->pe_prssi = MS(val, AR_PHY_RADAR_0_PRSSI); pe->pe_inband = MS(val, AR_PHY_RADAR_0_INBAND); val = OS_REG_READ(ah, AR_PHY_RADAR_1); temp = val & AR_PHY_RADAR_1_RELPWR_ENA; pe->pe_relpwr = MS(val, AR_PHY_RADAR_1_RELPWR_THRESH); if (temp) pe->pe_relpwr |= HAL_PHYERR_PARAM_ENABLE; temp = val & AR_PHY_RADAR_1_RELSTEP_CHECK; pe->pe_relstep = MS(val, AR_PHY_RADAR_1_RELSTEP_THRESH); if (temp) pe->pe_enabled = 1; else pe->pe_enabled = 0; pe->pe_maxlen = MS(val, AR_PHY_RADAR_1_MAXLEN); pe->pe_extchannel = !! (OS_REG_READ(ah, AR_PHY_RADAR_EXT) & AR_PHY_RADAR_EXT_ENA); pe->pe_usefir128 = !! (OS_REG_READ(ah, AR_PHY_RADAR_1) & AR_PHY_RADAR_1_USE_FIR128); pe->pe_blockradar = !! (OS_REG_READ(ah, AR_PHY_RADAR_1) & AR_PHY_RADAR_1_BLOCK_CHECK); pe->pe_enmaxrssi = !! (OS_REG_READ(ah, AR_PHY_RADAR_1) & AR_PHY_RADAR_1_MAX_RRSSI); } /* * Enable radar detection and set the radar parameters per the * values in pe */ void ar5416EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe) { uint32_t val; val = OS_REG_READ(ah, AR_PHY_RADAR_0); if (pe->pe_firpwr != HAL_PHYERR_PARAM_NOVAL) { val &= ~AR_PHY_RADAR_0_FIRPWR; val |= SM(pe->pe_firpwr, AR_PHY_RADAR_0_FIRPWR); } if (pe->pe_rrssi != HAL_PHYERR_PARAM_NOVAL) { val &= ~AR_PHY_RADAR_0_RRSSI; val |= SM(pe->pe_rrssi, AR_PHY_RADAR_0_RRSSI); } if (pe->pe_height != HAL_PHYERR_PARAM_NOVAL) { val &= ~AR_PHY_RADAR_0_HEIGHT; val |= SM(pe->pe_height, AR_PHY_RADAR_0_HEIGHT); } if (pe->pe_prssi != HAL_PHYERR_PARAM_NOVAL) { val &= ~AR_PHY_RADAR_0_PRSSI; val |= SM(pe->pe_prssi, AR_PHY_RADAR_0_PRSSI); } if (pe->pe_inband != HAL_PHYERR_PARAM_NOVAL) { val &= ~AR_PHY_RADAR_0_INBAND; val |= SM(pe->pe_inband, AR_PHY_RADAR_0_INBAND); } /*Enable FFT data*/ val |= AR_PHY_RADAR_0_FFT_ENA; OS_REG_WRITE(ah, AR_PHY_RADAR_0, val | AR_PHY_RADAR_0_ENA); if (pe->pe_usefir128 == 1) OS_REG_CLR_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_USE_FIR128); else if (pe->pe_usefir128 == 0) OS_REG_SET_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_USE_FIR128); if (pe->pe_enmaxrssi == 1) OS_REG_SET_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_MAX_RRSSI); else if (pe->pe_enmaxrssi == 0) OS_REG_CLR_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_MAX_RRSSI); if (pe->pe_blockradar == 1) OS_REG_SET_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_BLOCK_CHECK); else if (pe->pe_blockradar == 0) OS_REG_CLR_BIT(ah, AR_PHY_RADAR_1, AR_PHY_RADAR_1_BLOCK_CHECK); if (pe->pe_maxlen != HAL_PHYERR_PARAM_NOVAL) { val = OS_REG_READ(ah, AR_PHY_RADAR_1); val &= ~AR_PHY_RADAR_1_MAXLEN; val |= SM(pe->pe_maxlen, AR_PHY_RADAR_1_MAXLEN); OS_REG_WRITE(ah, AR_PHY_RADAR_1, val); } /* * Enable HT/40 if the upper layer asks; * it should check the channel is HT/40 and HAL_CAP_EXT_CHAN_DFS * is available. */ if (pe->pe_extchannel == 1) OS_REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA); else if (pe->pe_extchannel == 0) OS_REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA); if (pe->pe_relstep != HAL_PHYERR_PARAM_NOVAL) { val = OS_REG_READ(ah, AR_PHY_RADAR_1); val &= ~AR_PHY_RADAR_1_RELSTEP_THRESH; val |= SM(pe->pe_relstep, AR_PHY_RADAR_1_RELSTEP_THRESH); OS_REG_WRITE(ah, AR_PHY_RADAR_1, val); } if (pe->pe_relpwr != HAL_PHYERR_PARAM_NOVAL) { val = OS_REG_READ(ah, AR_PHY_RADAR_1); val &= ~AR_PHY_RADAR_1_RELPWR_THRESH; val |= SM(pe->pe_relpwr, AR_PHY_RADAR_1_RELPWR_THRESH); OS_REG_WRITE(ah, AR_PHY_RADAR_1, val); } } /* * Extract the radar event information from the given phy error. * * Returns AH_TRUE if the phy error was actually a phy error, * AH_FALSE if the phy error wasn't a phy error. */ HAL_BOOL ar5416ProcessRadarEvent(struct ath_hal *ah, struct ath_rx_status *rxs, uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event) { /* * For now, this isn't implemented. */ return AH_FALSE; }