Index: projects/mesh11s/sys/net80211/ieee80211_ht.c =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_ht.c (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_ht.c (revision 191689) @@ -1,2540 +1,2269 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11n protocol support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include /* define here, used throughout file */ #define MS(_v, _f) (((_v) & _f) >> _f##_S) #define SM(_v, _f) (((_v) << _f##_S) & _f) const struct ieee80211_mcs_rates ieee80211_htrates[16] = { { 13, 14, 27, 30 }, /* MCS 0 */ { 26, 29, 54, 60 }, /* MCS 1 */ { 39, 43, 81, 90 }, /* MCS 2 */ { 52, 58, 108, 120 }, /* MCS 3 */ { 78, 87, 162, 180 }, /* MCS 4 */ { 104, 116, 216, 240 }, /* MCS 5 */ { 117, 130, 243, 270 }, /* MCS 6 */ { 130, 144, 270, 300 }, /* MCS 7 */ { 26, 29, 54, 60 }, /* MCS 8 */ { 52, 58, 108, 120 }, /* MCS 9 */ { 78, 87, 162, 180 }, /* MCS 10 */ { 104, 116, 216, 240 }, /* MCS 11 */ { 156, 173, 324, 360 }, /* MCS 12 */ { 208, 231, 432, 480 }, /* MCS 13 */ { 234, 260, 486, 540 }, /* MCS 14 */ { 260, 289, 540, 600 } /* MCS 15 */ }; static const struct ieee80211_htrateset ieee80211_rateset_11n = { 16, { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 } }; #ifdef IEEE80211_AMPDU_AGE /* XXX public for sysctl hookup */ int ieee80211_ampdu_age = -1; /* threshold for ampdu reorder q (ms) */ #endif int ieee80211_recv_bar_ena = 1; int ieee80211_addba_timeout = -1; /* timeout waiting for ADDBA response */ int ieee80211_addba_backoff = -1; /* backoff after max ADDBA requests */ int ieee80211_addba_maxtries = 3; /* max ADDBA requests before backoff */ int ieee80211_bar_timeout = -1; /* timeout waiting for BAR response */ int ieee80211_bar_maxtries = 50; /* max BAR requests before DELBA */ /* * Setup HT parameters that depends on the clock frequency. */ static void ieee80211_ht_setup(void) { #ifdef IEEE80211_AMPDU_AGE ieee80211_ampdu_age = msecs_to_ticks(500); #endif ieee80211_addba_timeout = msecs_to_ticks(250); ieee80211_addba_backoff = msecs_to_ticks(10*1000); ieee80211_bar_timeout = msecs_to_ticks(250); } SYSINIT(wlan_ht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_ht_setup, NULL); static int ieee80211_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap); static int ieee80211_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int dialogtoken, int baparamset, int batimeout); static int ieee80211_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int code, int baparamset, int batimeout); static void ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap); static void ieee80211_aggr_recv_action(struct ieee80211_node *ni, const uint8_t *frm, const uint8_t *efrm); static void ieee80211_bar_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status); static void ampdu_tx_stop(struct ieee80211_tx_ampdu *tap); static void bar_stop_timer(struct ieee80211_tx_ampdu *tap); static int ampdu_rx_start(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); static void ampdu_rx_stop(struct ieee80211_node *, struct ieee80211_rx_ampdu *); void ieee80211_ht_attach(struct ieee80211com *ic) { /* setup default aggregation policy */ ic->ic_recv_action = ieee80211_aggr_recv_action; ic->ic_send_action = ieee80211_send_action; ic->ic_ampdu_enable = ieee80211_ampdu_enable; ic->ic_addba_request = ieee80211_addba_request; ic->ic_addba_response = ieee80211_addba_response; ic->ic_addba_stop = ieee80211_addba_stop; ic->ic_bar_response = ieee80211_bar_response; ic->ic_ampdu_rx_start = ampdu_rx_start; ic->ic_ampdu_rx_stop = ampdu_rx_stop; ic->ic_htprotmode = IEEE80211_PROT_RTSCTS; ic->ic_curhtprotmode = IEEE80211_HTINFO_OPMODE_PURE; } void ieee80211_ht_detach(struct ieee80211com *ic) { } void ieee80211_ht_vattach(struct ieee80211vap *vap) { /* driver can override defaults */ vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_8K; vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_NA; vap->iv_ampdu_limit = vap->iv_ampdu_rxmax; vap->iv_amsdu_limit = vap->iv_htcaps & IEEE80211_HTCAP_MAXAMSDU; /* tx aggregation traffic thresholds */ vap->iv_ampdu_mintraffic[WME_AC_BK] = 128; vap->iv_ampdu_mintraffic[WME_AC_BE] = 64; vap->iv_ampdu_mintraffic[WME_AC_VO] = 32; vap->iv_ampdu_mintraffic[WME_AC_VI] = 32; if (vap->iv_htcaps & IEEE80211_HTC_HT) { /* * Device is HT capable; enable all HT-related * facilities by default. * XXX these choices may be too aggressive. */ vap->iv_flags_ext |= IEEE80211_FEXT_HT | IEEE80211_FEXT_HTCOMPAT ; if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI20) vap->iv_flags_ext |= IEEE80211_FEXT_SHORTGI20; /* XXX infer from channel list? */ if (vap->iv_htcaps & IEEE80211_HTCAP_CHWIDTH40) { vap->iv_flags_ext |= IEEE80211_FEXT_USEHT40; if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI40) vap->iv_flags_ext |= IEEE80211_FEXT_SHORTGI40; } /* enable RIFS if capable */ if (vap->iv_htcaps & IEEE80211_HTC_RIFS) vap->iv_flags_ext |= IEEE80211_FEXT_RIFS; /* NB: A-MPDU and A-MSDU rx are mandated, these are tx only */ vap->iv_flags_ext |= IEEE80211_FEXT_AMPDU_RX; if (vap->iv_htcaps & IEEE80211_HTC_AMPDU) vap->iv_flags_ext |= IEEE80211_FEXT_AMPDU_TX; vap->iv_flags_ext |= IEEE80211_FEXT_AMSDU_RX; if (vap->iv_htcaps & IEEE80211_HTC_AMSDU) vap->iv_flags_ext |= IEEE80211_FEXT_AMSDU_TX; } /* NB: disable default legacy WDS, too many issues right now */ if (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) vap->iv_flags_ext &= ~IEEE80211_FEXT_HT; } void ieee80211_ht_vdetach(struct ieee80211vap *vap) { } static void ht_announce(struct ieee80211com *ic, int mode, const struct ieee80211_htrateset *rs) { struct ifnet *ifp = ic->ic_ifp; int i, rate, mword; if_printf(ifp, "%s MCS: ", ieee80211_phymode_name[mode]); for (i = 0; i < rs->rs_nrates; i++) { mword = ieee80211_rate2media(ic, rs->rs_rates[i] | IEEE80211_RATE_MCS, mode); if (IFM_SUBTYPE(mword) != IFM_IEEE80211_MCS) continue; rate = ieee80211_htrates[rs->rs_rates[i]].ht40_rate_400ns; printf("%s%d%sMbps", (i != 0 ? " " : ""), rate / 2, ((rate & 0x1) != 0 ? ".5" : "")); } printf("\n"); } void ieee80211_ht_announce(struct ieee80211com *ic) { if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA)) ht_announce(ic, IEEE80211_MODE_11NA, &ieee80211_rateset_11n); if (isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) ht_announce(ic, IEEE80211_MODE_11NG, &ieee80211_rateset_11n); } const struct ieee80211_htrateset * ieee80211_get_suphtrates(struct ieee80211com *ic, const struct ieee80211_channel *c) { return &ieee80211_rateset_11n; } /* * Receive processing. */ /* * Decap the encapsulated A-MSDU frames and dispatch all but * the last for delivery. The last frame is returned for * delivery via the normal path. */ struct mbuf * ieee80211_decap_amsdu(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; int framelen; struct mbuf *n; /* discard 802.3 header inserted by ieee80211_decap */ m_adj(m, sizeof(struct ether_header)); vap->iv_stats.is_amsdu_decap++; for (;;) { /* * Decap the first frame, bust it apart from the * remainder and deliver. We leave the last frame * delivery to the caller (for consistency with other * code paths, could also do it here). */ m = ieee80211_decap1(m, &framelen); if (m == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "a-msdu", "%s", "decap failed"); vap->iv_stats.is_amsdu_tooshort++; return NULL; } if (m->m_pkthdr.len == framelen) break; n = m_split(m, framelen, M_NOWAIT); if (n == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "a-msdu", "%s", "unable to split encapsulated frames"); vap->iv_stats.is_amsdu_split++; m_freem(m); /* NB: must reclaim */ return NULL; } vap->iv_deliver_data(vap, ni, m); /* * Remove frame contents; each intermediate frame * is required to be aligned to a 4-byte boundary. */ m = n; m_adj(m, roundup2(framelen, 4) - framelen); /* padding */ } return m; /* last delivered by caller */ } /* * Purge all frames in the A-MPDU re-order queue. */ static void ampdu_rx_purge(struct ieee80211_rx_ampdu *rap) { struct mbuf *m; int i; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m != NULL) { rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; m_freem(m); if (--rap->rxa_qframes == 0) break; } } KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0, ("lost %u data, %u frames on ampdu rx q", rap->rxa_qbytes, rap->rxa_qframes)); } /* * Start A-MPDU rx/re-order processing for the specified TID. */ static int ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, int baparamset, int batimeout, int baseqctl) { int bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); if (rap->rxa_flags & IEEE80211_AGGR_RUNNING) { /* * AMPDU previously setup and not terminated with a DELBA, * flush the reorder q's in case anything remains. */ ampdu_rx_purge(rap); } memset(rap, 0, sizeof(*rap)); rap->rxa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); rap->rxa_start = MS(baseqctl, IEEE80211_BASEQ_START); rap->rxa_flags |= IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND; return 0; } /* * Stop A-MPDU rx processing for the specified TID. */ static void ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) { ampdu_rx_purge(rap); rap->rxa_flags &= ~(IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND); } /* * Dispatch a frame from the A-MPDU reorder queue. The * frame is fed back into ieee80211_input marked with an * M_AMPDU_MPDU flag so it doesn't come back to us (it also * permits ieee80211_input to optimize re-processing). */ static __inline void ampdu_dispatch(struct ieee80211_node *ni, struct mbuf *m) { m->m_flags |= M_AMPDU_MPDU; /* bypass normal processing */ /* NB: rssi, noise, and rstamp are ignored w/ M_AMPDU_MPDU set */ (void) ieee80211_input(ni, m, 0, 0, 0); } /* * Dispatch as many frames as possible from the re-order queue. * Frames will always be "at the front"; we process all frames * up to the first empty slot in the window. On completion we * cleanup state if there are still pending frames in the current * BA window. We assume the frame at slot 0 is already handled * by the caller; we always start at slot 1. */ static void ampdu_rx_dispatch(struct ieee80211_rx_ampdu *rap, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; int i; /* flush run of frames */ for (i = 1; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m == NULL) break; rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; ampdu_dispatch(ni, m); } /* * If frames remain, copy the mbuf pointers down so * they correspond to the offsets in the new window. */ if (rap->rxa_qframes != 0) { int n = rap->rxa_qframes, j; for (j = i+1; j < rap->rxa_wnd; j++) { if (rap->rxa_m[j] != NULL) { rap->rxa_m[j-i] = rap->rxa_m[j]; rap->rxa_m[j] = NULL; if (--n == 0) break; } } KASSERT(n == 0, ("lost %d frames", n)); vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes; } /* * Adjust the start of the BA window to * reflect the frames just dispatched. */ rap->rxa_start = IEEE80211_SEQ_ADD(rap->rxa_start, i); vap->iv_stats.is_ampdu_rx_oor += i; } #ifdef IEEE80211_AMPDU_AGE /* * Dispatch all frames in the A-MPDU re-order queue. */ static void ampdu_rx_flush(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; int i; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m == NULL) continue; rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; vap->iv_stats.is_ampdu_rx_oor++; ampdu_dispatch(ni, m); if (rap->rxa_qframes == 0) break; } } #endif /* IEEE80211_AMPDU_AGE */ /* * Dispatch all frames in the A-MPDU re-order queue * preceding the specified sequence number. This logic * handles window moves due to a received MSDU or BAR. */ static void ampdu_rx_flush_upto(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, ieee80211_seq winstart) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; ieee80211_seq seqno; int i; /* * Flush any complete MSDU's with a sequence number lower * than winstart. Gaps may exist. Note that we may actually * dispatch frames past winstart if a run continues; this is * an optimization that avoids having to do a separate pass * to dispatch frames after moving the BA window start. */ seqno = rap->rxa_start; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m != NULL) { rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; vap->iv_stats.is_ampdu_rx_oor++; ampdu_dispatch(ni, m); } else { if (!IEEE80211_SEQ_BA_BEFORE(seqno, winstart)) break; } seqno = IEEE80211_SEQ_INC(seqno); } /* * If frames remain, copy the mbuf pointers down so * they correspond to the offsets in the new window. */ if (rap->rxa_qframes != 0) { int n = rap->rxa_qframes, j; /* NB: this loop assumes i > 0 and/or rxa_m[0] is NULL */ KASSERT(rap->rxa_m[0] == NULL, ("%s: BA window slot 0 occupied", __func__)); for (j = i+1; j < rap->rxa_wnd; j++) { if (rap->rxa_m[j] != NULL) { rap->rxa_m[j-i] = rap->rxa_m[j]; rap->rxa_m[j] = NULL; if (--n == 0) break; } } KASSERT(n == 0, ("%s: lost %d frames, qframes %d off %d " "BA win <%d:%d> winstart %d", __func__, n, rap->rxa_qframes, i, rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), winstart)); vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes; } /* * Move the start of the BA window; we use the * sequence number of the last MSDU that was * passed up the stack+1 or winstart if stopped on * a gap in the reorder buffer. */ rap->rxa_start = seqno; } /* * Process a received QoS data frame for an HT station. Handle * A-MPDU reordering: if this frame is received out of order * and falls within the BA window hold onto it. Otherwise if * this frame completes a run, flush any pending frames. We * return 1 if the frame is consumed. A 0 is returned if * the frame should be processed normally by the caller. */ int ieee80211_ampdu_reorder(struct ieee80211_node *ni, struct mbuf *m) { #define IEEE80211_FC0_QOSDATA \ (IEEE80211_FC0_TYPE_DATA|IEEE80211_FC0_SUBTYPE_QOS|IEEE80211_FC0_VERSION_0) #define PROCESS 0 /* caller should process frame */ #define CONSUMED 1 /* frame consumed, caller does nothing */ struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_qosframe *wh; struct ieee80211_rx_ampdu *rap; ieee80211_seq rxseq; uint8_t tid; int off; KASSERT((m->m_flags & (M_AMPDU | M_AMPDU_MPDU)) == M_AMPDU, ("!a-mpdu or already re-ordered, flags 0x%x", m->m_flags)); KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta")); /* NB: m_len known to be sufficient */ wh = mtod(m, struct ieee80211_qosframe *); if (wh->i_fc[0] != IEEE80211_FC0_QOSDATA) { /* * Not QoS data, shouldn't get here but just * return it to the caller for processing. */ return PROCESS; } if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) tid = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0]; else tid = wh->i_qos[0]; tid &= IEEE80211_QOS_TID; rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { /* * No ADDBA request yet, don't touch. */ return PROCESS; } rxseq = le16toh(*(uint16_t *)wh->i_seq); if ((rxseq & IEEE80211_SEQ_FRAG_MASK) != 0) { /* * Fragments are not allowed; toss. */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "A-MPDU", "fragment, rxseq 0x%x tid %u%s", rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_rx_drop++; IEEE80211_NODE_STAT(ni, rx_drop); m_freem(m); return CONSUMED; } rxseq >>= IEEE80211_SEQ_SEQ_SHIFT; rap->rxa_nframes++; again: if (rxseq == rap->rxa_start) { /* * First frame in window. */ if (rap->rxa_qframes != 0) { /* * Dispatch as many packets as we can. */ KASSERT(rap->rxa_m[0] == NULL, ("unexpected dup")); ampdu_dispatch(ni, m); ampdu_rx_dispatch(rap, ni); return CONSUMED; } else { /* * In order; advance window and notify * caller to dispatch directly. */ rap->rxa_start = IEEE80211_SEQ_INC(rxseq); return PROCESS; } } /* * Frame is out of order; store if in the BA window. */ /* calculate offset in BA window */ off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start); if (off < rap->rxa_wnd) { /* * Common case (hopefully): in the BA window. * Sec 9.10.7.6 a) (D2.04 p.118 line 47) */ #ifdef IEEE80211_AMPDU_AGE /* * Check for frames sitting too long in the reorder queue. * This should only ever happen if frames are not delivered * without the sender otherwise notifying us (e.g. with a * BAR to move the window). Typically this happens because * of vendor bugs that cause the sequence number to jump. * When this happens we get a gap in the reorder queue that * leaves frame sitting on the queue until they get pushed * out due to window moves. When the vendor does not send * BAR this move only happens due to explicit packet sends * * NB: we only track the time of the oldest frame in the * reorder q; this means that if we flush we might push * frames that still "new"; if this happens then subsequent * frames will result in BA window moves which cost something * but is still better than a big throughput dip. */ if (rap->rxa_qframes != 0) { /* XXX honor batimeout? */ if (ticks - rap->rxa_age > ieee80211_ampdu_age) { /* * Too long since we received the first * frame; flush the reorder buffer. */ if (rap->rxa_qframes != 0) { vap->iv_stats.is_ampdu_rx_age += rap->rxa_qframes; ampdu_rx_flush(ni, rap); } rap->rxa_start = IEEE80211_SEQ_INC(rxseq); return PROCESS; } } else { /* * First frame, start aging timer. */ rap->rxa_age = ticks; } #endif /* IEEE80211_AMPDU_AGE */ /* save packet */ if (rap->rxa_m[off] == NULL) { rap->rxa_m[off] = m; rap->rxa_qframes++; rap->rxa_qbytes += m->m_pkthdr.len; vap->iv_stats.is_ampdu_rx_reorder++; } else { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "a-mpdu duplicate", "seqno %u tid %u BA win <%u:%u>", rxseq, tid, rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1)); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); m_freem(m); } return CONSUMED; } if (off < IEEE80211_SEQ_BA_RANGE) { /* * Outside the BA window, but within range; * flush the reorder q and move the window. * Sec 9.10.7.6 b) (D2.04 p.118 line 60) */ IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "move BA win <%u:%u> (%u frames) rxseq %u tid %u", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid); vap->iv_stats.is_ampdu_rx_move++; /* * The spec says to flush frames up to but not including: * WinStart_B = rxseq - rap->rxa_wnd + 1 * Then insert the frame or notify the caller to process * it immediately. We can safely do this by just starting * over again because we know the frame will now be within * the BA window. */ /* NB: rxa_wnd known to be >0 */ ampdu_rx_flush_upto(ni, rap, IEEE80211_SEQ_SUB(rxseq, rap->rxa_wnd-1)); goto again; } else { /* * Outside the BA window and out of range; toss. * Sec 9.10.7.6 c) (D2.04 p.119 line 16) */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "MPDU", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_rx_drop++; IEEE80211_NODE_STAT(ni, rx_drop); m_freem(m); return CONSUMED; } #undef CONSUMED #undef PROCESS #undef IEEE80211_FC0_QOSDATA } /* * Process a BAR ctl frame. Dispatch all frames up to * the sequence number of the frame. If this frame is * out of range it's discarded. */ void ieee80211_recv_bar(struct ieee80211_node *ni, struct mbuf *m0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame_bar *wh; struct ieee80211_rx_ampdu *rap; ieee80211_seq rxseq; int tid, off; if (!ieee80211_recv_bar_ena) { #if 0 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "%s", "processing disabled"); #endif vap->iv_stats.is_ampdu_bar_bad++; return; } wh = mtod(m0, struct ieee80211_frame_bar *); /* XXX check basic BAR */ tid = MS(le16toh(wh->i_ctl), IEEE80211_BAR_TID); rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { /* * No ADDBA request yet, don't touch. */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "no BA stream, tid %u", tid); vap->iv_stats.is_ampdu_bar_bad++; return; } vap->iv_stats.is_ampdu_bar_rx++; rxseq = le16toh(wh->i_seq) >> IEEE80211_SEQ_SEQ_SHIFT; if (rxseq == rap->rxa_start) return; /* calculate offset in BA window */ off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start); if (off < IEEE80211_SEQ_BA_RANGE) { /* * Flush the reorder q up to rxseq and move the window. * Sec 9.10.7.6 a) (D2.04 p.119 line 22) */ IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "BAR moves BA win <%u:%u> (%u frames) rxseq %u tid %u", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid); vap->iv_stats.is_ampdu_bar_move++; ampdu_rx_flush_upto(ni, rap, rxseq); if (off >= rap->rxa_wnd) { /* * BAR specifies a window start to the right of BA * window; we must move it explicitly since * ampdu_rx_flush_upto will not. */ rap->rxa_start = rxseq; } } else { /* * Out of range; toss. * Sec 9.10.7.6 b) (D2.04 p.119 line 41) */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_bar_oow++; IEEE80211_NODE_STAT(ni, rx_drop); } } /* * Setup HT-specific state in a node. Called only * when HT use is negotiated so we don't do extra * work for temporary and/or legacy sta's. */ void ieee80211_ht_node_init(struct ieee80211_node *ni) { struct ieee80211_tx_ampdu *tap; int ac; if (ni->ni_flags & IEEE80211_NODE_HT) { /* * Clean AMPDU state on re-associate. This handles the case * where a station leaves w/o notifying us and then returns * before node is reaped for inactivity. */ ieee80211_ht_node_cleanup(ni); } for (ac = 0; ac < WME_NUM_AC; ac++) { tap = &ni->ni_tx_ampdu[ac]; tap->txa_ac = ac; tap->txa_ni = ni; /* NB: further initialization deferred */ } ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU; } /* * Cleanup HT-specific state in a node. Called only * when HT use has been marked. */ void ieee80211_ht_node_cleanup(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; int i; KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT node")); /* XXX optimize this */ for (i = 0; i < WME_NUM_AC; i++) { struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[i]; if (tap->txa_flags & IEEE80211_AGGR_SETUP) ampdu_tx_stop(tap); } for (i = 0; i < WME_NUM_TID; i++) ic->ic_ampdu_rx_stop(ni, &ni->ni_rx_ampdu[i]); ni->ni_htcap = 0; ni->ni_flags &= ~IEEE80211_NODE_HT_ALL; } /* * Age out HT resources for a station. */ void ieee80211_ht_node_age(struct ieee80211_node *ni) { #ifdef IEEE80211_AMPDU_AGE struct ieee80211vap *vap = ni->ni_vap; uint8_t tid; #endif KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta")); #ifdef IEEE80211_AMPDU_AGE for (tid = 0; tid < WME_NUM_TID; tid++) { struct ieee80211_rx_ampdu *rap; rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) continue; if (rap->rxa_qframes == 0) continue; /* * Check for frames sitting too long in the reorder queue. * See above for more details on what's happening here. */ /* XXX honor batimeout? */ if (ticks - rap->rxa_age > ieee80211_ampdu_age) { /* * Too long since we received the first * frame; flush the reorder buffer. */ vap->iv_stats.is_ampdu_rx_age += rap->rxa_qframes; ampdu_rx_flush(ni, rap); } } #endif /* IEEE80211_AMPDU_AGE */ } static struct ieee80211_channel * findhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int htflags) { return ieee80211_find_channel(ic, c->ic_freq, (c->ic_flags &~ IEEE80211_CHAN_HT) | htflags); } /* * Adjust a channel to be HT/non-HT according to the vap's configuration. */ struct ieee80211_channel * ieee80211_ht_adjust_channel(struct ieee80211com *ic, struct ieee80211_channel *chan, int flags) { struct ieee80211_channel *c; if (flags & IEEE80211_FEXT_HT) { /* promote to HT if possible */ if (flags & IEEE80211_FEXT_USEHT40) { if (!IEEE80211_IS_CHAN_HT40(chan)) { /* NB: arbitrarily pick ht40+ over ht40- */ c = findhtchan(ic, chan, IEEE80211_CHAN_HT40U); if (c == NULL) c = findhtchan(ic, chan, IEEE80211_CHAN_HT40D); if (c == NULL) c = findhtchan(ic, chan, IEEE80211_CHAN_HT20); if (c != NULL) chan = c; } } else if (!IEEE80211_IS_CHAN_HT20(chan)) { c = findhtchan(ic, chan, IEEE80211_CHAN_HT20); if (c != NULL) chan = c; } } else if (IEEE80211_IS_CHAN_HT(chan)) { /* demote to legacy, HT use is disabled */ c = ieee80211_find_channel(ic, chan->ic_freq, chan->ic_flags &~ IEEE80211_CHAN_HT); if (c != NULL) chan = c; } return chan; } /* * Setup HT-specific state for a legacy WDS peer. */ void ieee80211_ht_wds_init(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_tx_ampdu *tap; int ac; KASSERT(vap->iv_flags_ext & IEEE80211_FEXT_HT, ("no HT requested")); /* XXX check scan cache in case peer has an ap and we have info */ /* * If setup with a legacy channel; locate an HT channel. * Otherwise if the inherited channel (from a companion * AP) is suitable use it so we use the same location * for the extension channel). */ ni->ni_chan = ieee80211_ht_adjust_channel(ni->ni_ic, ni->ni_chan, ieee80211_htchanflags(ni->ni_chan)); ni->ni_htcap = 0; if (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI20) ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI20; if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { ni->ni_htcap |= IEEE80211_HTCAP_CHWIDTH40; ni->ni_chw = 40; if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan)) ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan)) ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_BELOW; if (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI40) ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI40; } else { ni->ni_chw = 20; ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_NONE; } ni->ni_htctlchan = ni->ni_chan->ic_ieee; if (vap->iv_flags_ext & IEEE80211_FEXT_RIFS) ni->ni_flags |= IEEE80211_NODE_RIFS; /* XXX does it make sense to enable SMPS? */ ni->ni_htopmode = 0; /* XXX need protection state */ ni->ni_htstbc = 0; /* XXX need info */ for (ac = 0; ac < WME_NUM_AC; ac++) { tap = &ni->ni_tx_ampdu[ac]; tap->txa_ac = ac; } /* NB: AMPDU tx/rx governed by IEEE80211_FEXT_AMPDU_{TX,RX} */ ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU; } /* * Notify hostap vaps of a change in the HTINFO ie. */ static void htinfo_notify(struct ieee80211com *ic) { struct ieee80211vap *vap; int first = 1; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_opmode != IEEE80211_M_HOSTAP) continue; if (vap->iv_state != IEEE80211_S_RUN || !IEEE80211_IS_CHAN_HT(vap->iv_bss->ni_chan)) continue; if (first) { IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, vap->iv_bss, "HT bss occupancy change: %d sta, %d ht, " "%d ht40%s, HT protmode now 0x%x" , ic->ic_sta_assoc , ic->ic_ht_sta_assoc , ic->ic_ht40_sta_assoc , (ic->ic_flags_ext & IEEE80211_FEXT_NONHT_PR) ? ", non-HT sta present" : "" , ic->ic_curhtprotmode); first = 0; } ieee80211_beacon_notify(vap, IEEE80211_BEACON_HTINFO); } } /* * Calculate HT protection mode from current * state and handle updates. */ static void htinfo_update(struct ieee80211com *ic) { uint8_t protmode; if (ic->ic_sta_assoc != ic->ic_ht_sta_assoc) { protmode = IEEE80211_HTINFO_OPMODE_MIXED | IEEE80211_HTINFO_NONHT_PRESENT; } else if (ic->ic_flags_ext & IEEE80211_FEXT_NONHT_PR) { protmode = IEEE80211_HTINFO_OPMODE_PROTOPT | IEEE80211_HTINFO_NONHT_PRESENT; } else if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) && ic->ic_sta_assoc != ic->ic_ht40_sta_assoc) { protmode = IEEE80211_HTINFO_OPMODE_HT20PR; } else { protmode = IEEE80211_HTINFO_OPMODE_PURE; } if (protmode != ic->ic_curhtprotmode) { ic->ic_curhtprotmode = protmode; htinfo_notify(ic); } } /* * Handle an HT station joining a BSS. */ void ieee80211_ht_node_join(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); if (ni->ni_flags & IEEE80211_NODE_HT) { ic->ic_ht_sta_assoc++; if (ni->ni_chw == 40) ic->ic_ht40_sta_assoc++; } htinfo_update(ic); } /* * Handle an HT station leaving a BSS. */ void ieee80211_ht_node_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); if (ni->ni_flags & IEEE80211_NODE_HT) { ic->ic_ht_sta_assoc--; if (ni->ni_chw == 40) ic->ic_ht40_sta_assoc--; } htinfo_update(ic); } /* * Public version of htinfo_update; used for processing * beacon frames from overlapping bss. * * Caller can specify either IEEE80211_HTINFO_OPMODE_MIXED * (on receipt of a beacon that advertises MIXED) or * IEEE80211_HTINFO_OPMODE_PROTOPT (on receipt of a beacon * from an overlapping legacy bss). We treat MIXED with * a higher precedence than PROTOPT (i.e. we will not change * change PROTOPT -> MIXED; only MIXED -> PROTOPT). This * corresponds to how we handle things in htinfo_update. */ void ieee80211_htprot_update(struct ieee80211com *ic, int protmode) { #define OPMODE(x) SM(x, IEEE80211_HTINFO_OPMODE) IEEE80211_LOCK(ic); /* track non-HT station presence */ KASSERT(protmode & IEEE80211_HTINFO_NONHT_PRESENT, ("protmode 0x%x", protmode)); ic->ic_flags_ext |= IEEE80211_FEXT_NONHT_PR; ic->ic_lastnonht = ticks; if (protmode != ic->ic_curhtprotmode && (OPMODE(ic->ic_curhtprotmode) != IEEE80211_HTINFO_OPMODE_MIXED || OPMODE(protmode) == IEEE80211_HTINFO_OPMODE_PROTOPT)) { /* push beacon update */ ic->ic_curhtprotmode = protmode; htinfo_notify(ic); } IEEE80211_UNLOCK(ic); #undef OPMODE } /* * Time out presence of an overlapping bss with non-HT * stations. When operating in hostap mode we listen for * beacons from other stations and if we identify a non-HT * station is present we update the opmode field of the * HTINFO ie. To identify when all non-HT stations are * gone we time out this condition. */ void ieee80211_ht_timeout(struct ieee80211com *ic) { IEEE80211_LOCK_ASSERT(ic); if ((ic->ic_flags_ext & IEEE80211_FEXT_NONHT_PR) && time_after(ticks, ic->ic_lastnonht + IEEE80211_NONHT_PRESENT_AGE)) { #if 0 IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "%s", "time out non-HT STA present on channel"); #endif ic->ic_flags_ext &= ~IEEE80211_FEXT_NONHT_PR; htinfo_update(ic); } } /* unalligned little endian access */ #define LE_READ_2(p) \ ((uint16_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8))) /* * Process an 802.11n HT capabilities ie. */ void ieee80211_parse_htcap(struct ieee80211_node *ni, const uint8_t *ie) { if (ie[0] == IEEE80211_ELEMID_VENDOR) { /* * Station used Vendor OUI ie to associate; * mark the node so when we respond we'll use * the Vendor OUI's and not the standard ie's. */ ni->ni_flags |= IEEE80211_NODE_HTCOMPAT; ie += 4; } else ni->ni_flags &= ~IEEE80211_NODE_HTCOMPAT; ni->ni_htcap = LE_READ_2(ie + __offsetof(struct ieee80211_ie_htcap, hc_cap)); ni->ni_htparam = ie[__offsetof(struct ieee80211_ie_htcap, hc_param)]; } static void htinfo_parse(struct ieee80211_node *ni, const struct ieee80211_ie_htinfo *htinfo) { uint16_t w; ni->ni_htctlchan = htinfo->hi_ctrlchannel; ni->ni_ht2ndchan = SM(htinfo->hi_byte1, IEEE80211_HTINFO_2NDCHAN); w = LE_READ_2(&htinfo->hi_byte2); ni->ni_htopmode = SM(w, IEEE80211_HTINFO_OPMODE); w = LE_READ_2(&htinfo->hi_byte45); ni->ni_htstbc = SM(w, IEEE80211_HTINFO_BASIC_STBCMCS); } /* * Parse an 802.11n HT info ie and save useful information * to the node state. Note this does not effect any state * changes such as for channel width change. */ void ieee80211_parse_htinfo(struct ieee80211_node *ni, const uint8_t *ie) { if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htinfo_parse(ni, (const struct ieee80211_ie_htinfo *) ie); } /* * Handle 11n channel switch. Use the received HT ie's to * identify the right channel to use. If we cannot locate it * in the channel table then fallback to legacy operation. * Note that we use this information to identify the node's * channel only; the caller is responsible for insuring any * required channel change is done (e.g. in sta mode when * parsing the contents of a beacon frame). */ static void htinfo_update_chw(struct ieee80211_node *ni, int htflags) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_channel *c; int chanflags; chanflags = (ni->ni_chan->ic_flags &~ IEEE80211_CHAN_HT) | htflags; if (chanflags != ni->ni_chan->ic_flags) { /* XXX not right for ht40- */ c = ieee80211_find_channel(ic, ni->ni_chan->ic_freq, chanflags); if (c == NULL && (htflags & IEEE80211_CHAN_HT40)) { /* * No HT40 channel entry in our table; fall back * to HT20 operation. This should not happen. */ c = findhtchan(ic, ni->ni_chan, IEEE80211_CHAN_HT20); #if 0 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni, "no HT40 channel (freq %u), falling back to HT20", ni->ni_chan->ic_freq); #endif /* XXX stat */ } if (c != NULL && c != ni->ni_chan) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni, "switch station to HT%d channel %u/0x%x", IEEE80211_IS_CHAN_HT40(c) ? 40 : 20, c->ic_freq, c->ic_flags); ni->ni_chan = c; } /* NB: caller responsible for forcing any channel change */ } /* update node's tx channel width */ ni->ni_chw = IEEE80211_IS_CHAN_HT40(ni->ni_chan)? 40 : 20; } /* * Update 11n MIMO PS state according to received htcap. */ static __inline int htcap_update_mimo_ps(struct ieee80211_node *ni) { uint16_t oflags = ni->ni_flags; switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) { case IEEE80211_HTCAP_SMPS_DYNAMIC: ni->ni_flags |= IEEE80211_NODE_MIMO_PS; ni->ni_flags |= IEEE80211_NODE_MIMO_RTS; break; case IEEE80211_HTCAP_SMPS_ENA: ni->ni_flags |= IEEE80211_NODE_MIMO_PS; ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; break; case IEEE80211_HTCAP_SMPS_OFF: default: /* disable on rx of reserved value */ ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS; ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; break; } return (oflags ^ ni->ni_flags); } /* * Update short GI state according to received htcap * and local settings. */ static __inline void htcap_update_shortgi(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags &= ~(IEEE80211_NODE_SGI20|IEEE80211_NODE_SGI40); if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) && (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI20)) ni->ni_flags |= IEEE80211_NODE_SGI20; if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) && (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI40)) ni->ni_flags |= IEEE80211_NODE_SGI40; } /* * Parse and update HT-related state extracted from * the HT cap and info ie's. */ void ieee80211_ht_updateparams(struct ieee80211_node *ni, const uint8_t *htcapie, const uint8_t *htinfoie) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_ie_htinfo *htinfo; int htflags; ieee80211_parse_htcap(ni, htcapie); if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS) htcap_update_mimo_ps(ni); htcap_update_shortgi(ni); if (htinfoie[0] == IEEE80211_ELEMID_VENDOR) htinfoie += 4; htinfo = (const struct ieee80211_ie_htinfo *) htinfoie; htinfo_parse(ni, htinfo); htflags = (vap->iv_flags_ext & IEEE80211_FEXT_HT) ? IEEE80211_CHAN_HT20 : 0; /* NB: honor operating mode constraint */ if ((htinfo->hi_byte1 & IEEE80211_HTINFO_TXWIDTH_2040) && (vap->iv_flags_ext & IEEE80211_FEXT_USEHT40)) { if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_ABOVE) htflags = IEEE80211_CHAN_HT40U; else if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_BELOW) htflags = IEEE80211_CHAN_HT40D; } htinfo_update_chw(ni, htflags); if ((htinfo->hi_byte1 & IEEE80211_HTINFO_RIFSMODE_PERM) && (vap->iv_flags_ext & IEEE80211_FEXT_RIFS)) ni->ni_flags |= IEEE80211_NODE_RIFS; else ni->ni_flags &= ~IEEE80211_NODE_RIFS; } /* * Parse and update HT-related state extracted from the HT cap ie * for a station joining an HT BSS. */ void ieee80211_ht_updatehtcap(struct ieee80211_node *ni, const uint8_t *htcapie) { struct ieee80211vap *vap = ni->ni_vap; int htflags; ieee80211_parse_htcap(ni, htcapie); if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS) htcap_update_mimo_ps(ni); htcap_update_shortgi(ni); /* NB: honor operating mode constraint */ /* XXX 40 MHZ intolerant */ htflags = (vap->iv_flags_ext & IEEE80211_FEXT_HT) ? IEEE80211_CHAN_HT20 : 0; if ((ni->ni_htcap & IEEE80211_HTCAP_CHWIDTH40) && (vap->iv_flags_ext & IEEE80211_FEXT_USEHT40)) { if (IEEE80211_IS_CHAN_HT40U(vap->iv_bss->ni_chan)) htflags = IEEE80211_CHAN_HT40U; else if (IEEE80211_IS_CHAN_HT40D(vap->iv_bss->ni_chan)) htflags = IEEE80211_CHAN_HT40D; } htinfo_update_chw(ni, htflags); } /* * Install received HT rate set by parsing the HT cap ie. */ int ieee80211_setup_htrates(struct ieee80211_node *ni, const uint8_t *ie, int flags) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_ie_htcap *htcap; struct ieee80211_htrateset *rs; int i; rs = &ni->ni_htrates; memset(rs, 0, sizeof(*rs)); if (ie != NULL) { if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htcap = (const struct ieee80211_ie_htcap *) ie; for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) { if (isclr(htcap->hc_mcsset, i)) continue; if (rs->rs_nrates == IEEE80211_HTRATE_MAXSIZE) { IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, "WARNING, HT rate set too large; only " "using %u rates", IEEE80211_HTRATE_MAXSIZE); vap->iv_stats.is_rx_rstoobig++; break; } rs->rs_rates[rs->rs_nrates++] = i; } } return ieee80211_fix_rate(ni, (struct ieee80211_rateset *) rs, flags); } /* * Mark rates in a node's HT rate set as basic according * to the information in the supplied HT info ie. */ void ieee80211_setup_basic_htrates(struct ieee80211_node *ni, const uint8_t *ie) { const struct ieee80211_ie_htinfo *htinfo; struct ieee80211_htrateset *rs; int i, j; if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htinfo = (const struct ieee80211_ie_htinfo *) ie; rs = &ni->ni_htrates; if (rs->rs_nrates == 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, "%s", "WARNING, empty HT rate set"); return; } for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) { if (isclr(htinfo->hi_basicmcsset, i)) continue; for (j = 0; j < rs->rs_nrates; j++) if ((rs->rs_rates[j] & IEEE80211_RATE_VAL) == i) rs->rs_rates[j] |= IEEE80211_RATE_BASIC; } } static void ampdu_tx_setup(struct ieee80211_tx_ampdu *tap) { callout_init(&tap->txa_timer, CALLOUT_MPSAFE); tap->txa_flags |= IEEE80211_AGGR_SETUP; } static void ampdu_tx_stop(struct ieee80211_tx_ampdu *tap) { struct ieee80211_node *ni = tap->txa_ni; struct ieee80211com *ic = ni->ni_ic; KASSERT(tap->txa_flags & IEEE80211_AGGR_SETUP, ("txa_flags 0x%x ac %d", tap->txa_flags, tap->txa_ac)); /* * Stop BA stream if setup so driver has a chance * to reclaim any resources it might have allocated. */ ic->ic_addba_stop(ni, tap); /* * Stop any pending BAR transmit. */ bar_stop_timer(tap); tap->txa_lastsample = 0; tap->txa_avgpps = 0; /* NB: clearing NAK means we may re-send ADDBA */ tap->txa_flags &= ~(IEEE80211_AGGR_SETUP | IEEE80211_AGGR_NAK); } static void addba_timeout(void *arg) { struct ieee80211_tx_ampdu *tap = arg; /* XXX ? */ tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND; tap->txa_attempts++; } static void addba_start_timeout(struct ieee80211_tx_ampdu *tap) { /* XXX use CALLOUT_PENDING instead? */ callout_reset(&tap->txa_timer, ieee80211_addba_timeout, addba_timeout, tap); tap->txa_flags |= IEEE80211_AGGR_XCHGPEND; tap->txa_nextrequest = ticks + ieee80211_addba_timeout; } static void addba_stop_timeout(struct ieee80211_tx_ampdu *tap) { /* XXX use CALLOUT_PENDING instead? */ if (tap->txa_flags & IEEE80211_AGGR_XCHGPEND) { callout_stop(&tap->txa_timer); tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND; } } /* * Default method for requesting A-MPDU tx aggregation. * We setup the specified state block and start a timer * to wait for an ADDBA response frame. */ static int ieee80211_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int dialogtoken, int baparamset, int batimeout) { int bufsiz; /* XXX locking */ tap->txa_token = dialogtoken; tap->txa_flags |= IEEE80211_AGGR_IMMEDIATE; bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); tap->txa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); addba_start_timeout(tap); return 1; } /* * Default method for processing an A-MPDU tx aggregation * response. We shutdown any pending timer and update the * state block according to the reply. */ static int ieee80211_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status, int baparamset, int batimeout) { int bufsiz, tid; /* XXX locking */ addba_stop_timeout(tap); if (status == IEEE80211_STATUS_SUCCESS) { bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); /* XXX override our request? */ tap->txa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); /* XXX AC/TID */ tid = MS(baparamset, IEEE80211_BAPS_TID); tap->txa_flags |= IEEE80211_AGGR_RUNNING; tap->txa_attempts = 0; } else { /* mark tid so we don't try again */ tap->txa_flags |= IEEE80211_AGGR_NAK; } return 1; } /* * Default method for stopping A-MPDU tx aggregation. * Any timer is cleared and we drain any pending frames. */ static void ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { /* XXX locking */ addba_stop_timeout(tap); if (tap->txa_flags & IEEE80211_AGGR_RUNNING) { /* XXX clear aggregation queue */ tap->txa_flags &= ~IEEE80211_AGGR_RUNNING; } tap->txa_attempts = 0; } /* * Process a received action frame using the default aggregation * policy. We intercept ADDBA-related frames and use them to * update our aggregation state. All other frames are passed up * for processing by ieee80211_recv_action. */ static void ieee80211_aggr_recv_action(struct ieee80211_node *ni, const uint8_t *frm, const uint8_t *efrm) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_action *ia; struct ieee80211_rx_ampdu *rap; struct ieee80211_tx_ampdu *tap; uint8_t dialogtoken, policy; uint16_t baparamset, batimeout, baseqctl, code; uint16_t args[4]; int tid, ac, bufsiz; ia = (const struct ieee80211_action *) frm; switch (ia->ia_category) { case IEEE80211_ACTION_CAT_BA: switch (ia->ia_action) { case IEEE80211_ACTION_BA_ADDBA_REQUEST: dialogtoken = frm[2]; baparamset = LE_READ_2(frm+3); batimeout = LE_READ_2(frm+5); baseqctl = LE_READ_2(frm+7); tid = MS(baparamset, IEEE80211_BAPS_TID); IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv ADDBA request: dialogtoken %u " "baparamset 0x%x (tid %d bufsiz %d) batimeout %d " "baseqctl %d:%d", dialogtoken, baparamset, tid, MS(baparamset, IEEE80211_BAPS_BUFSIZ), batimeout, MS(baseqctl, IEEE80211_BASEQ_START), MS(baseqctl, IEEE80211_BASEQ_FRAG)); rap = &ni->ni_rx_ampdu[tid]; /* Send ADDBA response */ args[0] = dialogtoken; /* * NB: We ack only if the sta associated with HT and * the ap is configured to do AMPDU rx (the latter * violates the 11n spec and is mostly for testing). */ if ((ni->ni_flags & IEEE80211_NODE_AMPDU_RX) && (vap->iv_flags_ext & IEEE80211_FEXT_AMPDU_RX)) { /* XXX handle ampdu_rx_start failure */ ic->ic_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl); args[1] = IEEE80211_STATUS_SUCCESS; } else { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "reject ADDBA request: %s", ni->ni_flags & IEEE80211_NODE_AMPDU_RX ? "administratively disabled" : "not negotiated for station"); vap->iv_stats.is_addba_reject++; args[1] = IEEE80211_STATUS_UNSPECIFIED; } /* XXX honor rap flags? */ args[2] = IEEE80211_BAPS_POLICY_IMMEDIATE | SM(tid, IEEE80211_BAPS_TID) | SM(rap->rxa_wnd, IEEE80211_BAPS_BUFSIZ) ; args[3] = 0; ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_RESPONSE, args); return; case IEEE80211_ACTION_BA_ADDBA_RESPONSE: dialogtoken = frm[2]; code = LE_READ_2(frm+3); baparamset = LE_READ_2(frm+5); tid = MS(baparamset, IEEE80211_BAPS_TID); bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); policy = MS(baparamset, IEEE80211_BAPS_POLICY); batimeout = LE_READ_2(frm+7); ac = TID_TO_WME_AC(tid); tap = &ni->ni_tx_ampdu[ac]; if ((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "no pending ADDBA, tid %d dialogtoken %u " "code %d", tid, dialogtoken, code); vap->iv_stats.is_addba_norequest++; return; } if (dialogtoken != tap->txa_token) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "dialogtoken mismatch: waiting for %d, " "received %d, tid %d code %d", tap->txa_token, dialogtoken, tid, code); vap->iv_stats.is_addba_badtoken++; return; } /* NB: assumes IEEE80211_AGGR_IMMEDIATE is 1 */ if (policy != (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "policy mismatch: expecting %s, " "received %s, tid %d code %d", tap->txa_flags & IEEE80211_AGGR_IMMEDIATE, policy, tid, code); vap->iv_stats.is_addba_badpolicy++; return; } #if 0 /* XXX we take MIN in ieee80211_addba_response */ if (bufsiz > IEEE80211_AGGR_BAWMAX) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "BA window too large: max %d, " "received %d, tid %d code %d", bufsiz, IEEE80211_AGGR_BAWMAX, tid, code); vap->iv_stats.is_addba_badbawinsize++; return; } #endif IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv ADDBA response: dialogtoken %u code %d " "baparamset 0x%x (tid %d bufsiz %d) batimeout %d", dialogtoken, code, baparamset, tid, bufsiz, batimeout); ic->ic_addba_response(ni, tap, code, baparamset, batimeout); return; case IEEE80211_ACTION_BA_DELBA: baparamset = LE_READ_2(frm+2); code = LE_READ_2(frm+4); tid = MS(baparamset, IEEE80211_DELBAPS_TID); IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv DELBA: baparamset 0x%x (tid %d initiator %d) " "code %d", baparamset, tid, MS(baparamset, IEEE80211_DELBAPS_INIT), code); if ((baparamset & IEEE80211_DELBAPS_INIT) == 0) { ac = TID_TO_WME_AC(tid); tap = &ni->ni_tx_ampdu[ac]; ic->ic_addba_stop(ni, tap); } else { rap = &ni->ni_rx_ampdu[tid]; ic->ic_ampdu_rx_stop(ni, rap); } return; } break; } ieee80211_recv_action(ni, frm, efrm); } /* - * Process a received 802.11n action frame. - * Aggregation-related frames are assumed to be handled - * already; we handle any other frames we can, otherwise - * complain about being unsupported (with debugging). - */ -void -ieee80211_recv_action(struct ieee80211_node *ni, - const uint8_t *frm, const uint8_t *efrm) -{ - struct ieee80211vap *vap = ni->ni_vap; - const struct ieee80211_action *ia; - int chw; - - ia = (const struct ieee80211_action *) frm; - switch (ia->ia_category) { - case IEEE80211_ACTION_CAT_BA: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: BA action %d not implemented", __func__, - ia->ia_action); - vap->iv_stats.is_rx_mgtdiscard++; - break; - case IEEE80211_ACTION_CAT_HT: - switch (ia->ia_action) { - case IEEE80211_ACTION_HT_TXCHWIDTH: - chw = frm[2] == IEEE80211_A_HT_TXCHWIDTH_2040 ? 40 : 20; - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: HT txchwidth, width %d%s", - __func__, chw, ni->ni_chw != chw ? "*" : ""); - if (chw != ni->ni_chw) { - ni->ni_chw = chw; - /* XXX notify on change */ - } - break; - case IEEE80211_ACTION_HT_MIMOPWRSAVE: { - const struct ieee80211_action_ht_mimopowersave *mps = - (const struct ieee80211_action_ht_mimopowersave *) ia; - /* XXX check iv_htcaps */ - if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA) - ni->ni_flags |= IEEE80211_NODE_MIMO_PS; - else - ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS; - if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_MODE) - ni->ni_flags |= IEEE80211_NODE_MIMO_RTS; - else - ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; - /* XXX notify on change */ - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: HT MIMO PS (%s%s)", __func__, - (ni->ni_flags & IEEE80211_NODE_MIMO_PS) ? - "on" : "off", - (ni->ni_flags & IEEE80211_NODE_MIMO_RTS) ? - "+rts" : "" - ); - break; - } - default: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: HT action %d not implemented", __func__, - ia->ia_action); - vap->iv_stats.is_rx_mgtdiscard++; - break; - } - break; - default: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: category %d not implemented", __func__, - ia->ia_category); - vap->iv_stats.is_rx_mgtdiscard++; - break; - } -} - -/* * Transmit processing. */ /* * Check if A-MPDU should be requested/enabled for a stream. * We require a traffic rate above a per-AC threshold and we * also handle backoff from previous failed attempts. * * Drivers may override this method to bring in information * such as link state conditions in making the decision. */ static int ieee80211_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { struct ieee80211vap *vap = ni->ni_vap; if (tap->txa_avgpps < vap->iv_ampdu_mintraffic[tap->txa_ac]) return 0; /* XXX check rssi? */ if (tap->txa_attempts >= ieee80211_addba_maxtries && ticks < tap->txa_nextrequest) { /* * Don't retry too often; txa_nextrequest is set * to the minimum interval we'll retry after * ieee80211_addba_maxtries failed attempts are made. */ return 0; } IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "enable AMPDU on %s, avgpps %d pkts %d", ieee80211_wme_acnames[tap->txa_ac], tap->txa_avgpps, tap->txa_pkts); return 1; } /* * Request A-MPDU tx aggregation. Setup local state and * issue an ADDBA request. BA use will only happen after * the other end replies with ADDBA response. */ int ieee80211_ampdu_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { struct ieee80211com *ic = ni->ni_ic; uint16_t args[4]; int tid, dialogtoken; static int tokens = 0; /* XXX */ /* XXX locking */ if ((tap->txa_flags & IEEE80211_AGGR_SETUP) == 0) { /* do deferred setup of state */ ampdu_tx_setup(tap); } /* XXX hack for not doing proper locking */ tap->txa_flags &= ~IEEE80211_AGGR_NAK; dialogtoken = (tokens+1) % 63; /* XXX */ tid = WME_AC_TO_TID(tap->txa_ac); tap->txa_start = ni->ni_txseqs[tid]; args[0] = dialogtoken; args[1] = IEEE80211_BAPS_POLICY_IMMEDIATE | SM(tid, IEEE80211_BAPS_TID) | SM(IEEE80211_AGGR_BAWMAX, IEEE80211_BAPS_BUFSIZ) ; args[2] = 0; /* batimeout */ /* NB: do first so there's no race against reply */ if (!ic->ic_addba_request(ni, tap, dialogtoken, args[1], args[2])) { /* unable to setup state, don't make request */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: could not setup BA stream for AC %d", __func__, tap->txa_ac); /* defer next try so we don't slam the driver with requests */ tap->txa_attempts = ieee80211_addba_maxtries; /* NB: check in case driver wants to override */ if (tap->txa_nextrequest <= ticks) tap->txa_nextrequest = ticks + ieee80211_addba_backoff; return 0; } tokens = dialogtoken; /* allocate token */ /* NB: after calling ic_addba_request so driver can set txa_start */ args[3] = SM(tap->txa_start, IEEE80211_BASEQ_START) | SM(0, IEEE80211_BASEQ_FRAG) ; return ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_REQUEST, args); } /* * Terminate an AMPDU tx stream. State is reclaimed * and the peer notified with a DelBA Action frame. */ void ieee80211_ampdu_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int reason) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; uint16_t args[4]; /* XXX locking */ tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; if (IEEE80211_AMPDU_RUNNING(tap)) { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: stop BA stream for AC %d (reason %d)", __func__, tap->txa_ac, reason); vap->iv_stats.is_ampdu_stop++; ic->ic_addba_stop(ni, tap); args[0] = WME_AC_TO_TID(tap->txa_ac); args[1] = IEEE80211_DELBAPS_INIT; args[2] = reason; /* XXX reason code */ ieee80211_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_DELBA, args); } else { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: BA stream for AC %d not running (reason %d)", __func__, tap->txa_ac, reason); vap->iv_stats.is_ampdu_stop_failed++; } } static void bar_timeout(void *arg) { struct ieee80211_tx_ampdu *tap = arg; struct ieee80211_node *ni = tap->txa_ni; KASSERT((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0, ("bar/addba collision, flags 0x%x", tap->txa_flags)); IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: tid %u flags 0x%x attempts %d", __func__, tap->txa_ac, tap->txa_flags, tap->txa_attempts); /* guard against race with bar_tx_complete */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) == 0) return; /* XXX ? */ if (tap->txa_attempts >= ieee80211_bar_maxtries) ieee80211_ampdu_stop(ni, tap, IEEE80211_REASON_TIMEOUT); else ieee80211_send_bar(ni, tap, tap->txa_seqpending); } static void bar_start_timer(struct ieee80211_tx_ampdu *tap) { callout_reset(&tap->txa_timer, ieee80211_bar_timeout, bar_timeout, tap); } static void bar_stop_timer(struct ieee80211_tx_ampdu *tap) { callout_stop(&tap->txa_timer); } static void bar_tx_complete(struct ieee80211_node *ni, void *arg, int status) { struct ieee80211_tx_ampdu *tap = arg; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: tid %u flags 0x%x pending %d status %d", __func__, tap->txa_ac, tap->txa_flags, callout_pending(&tap->txa_timer), status); /* XXX locking */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) && callout_pending(&tap->txa_timer)) { struct ieee80211com *ic = ni->ni_ic; if (status) /* ACK'd */ bar_stop_timer(tap); ic->ic_bar_response(ni, tap, status); /* NB: just let timer expire so we pace requests */ } } static void ieee80211_bar_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status) { if (status != 0) { /* got ACK */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "BAR moves BA win <%u:%u> (%u frames) txseq %u tid %u", tap->txa_start, IEEE80211_SEQ_ADD(tap->txa_start, tap->txa_wnd-1), tap->txa_qframes, tap->txa_seqpending, WME_AC_TO_TID(tap->txa_ac)); /* NB: timer already stopped in bar_tx_complete */ tap->txa_start = tap->txa_seqpending; tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; } } /* * Transmit a BAR frame to the specified node. The * BAR contents are drawn from the supplied aggregation * state associated with the node. * * NB: we only handle immediate ACK w/ compressed bitmap. */ int ieee80211_send_bar(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, ieee80211_seq seq) { #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame_bar *bar; struct mbuf *m; uint16_t barctl, barseqctl; uint8_t *frm; int tid, ret; if ((tap->txa_flags & IEEE80211_AGGR_RUNNING) == 0) { /* no ADDBA response, should not happen */ /* XXX stat+msg */ return EINVAL; } /* XXX locking */ bar_stop_timer(tap); ieee80211_ref_node(ni); m = ieee80211_getmgtframe(&frm, ic->ic_headroom, sizeof(*bar)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); if (!ieee80211_add_callback(m, bar_tx_complete, tap)) { m_freem(m); senderr(ENOMEM, is_tx_nobuf); /* XXX */ /* NOTREACHED */ } bar = mtod(m, struct ieee80211_frame_bar *); bar->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR; bar->i_fc[1] = 0; IEEE80211_ADDR_COPY(bar->i_ra, ni->ni_macaddr); IEEE80211_ADDR_COPY(bar->i_ta, vap->iv_myaddr); tid = WME_AC_TO_TID(tap->txa_ac); barctl = (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE ? 0 : IEEE80211_BAR_NOACK) | IEEE80211_BAR_COMP | SM(tid, IEEE80211_BAR_TID) ; barseqctl = SM(seq, IEEE80211_BAR_SEQ_START); /* NB: known to have proper alignment */ bar->i_ctl = htole16(barctl); bar->i_seq = htole16(barseqctl); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_bar); M_WME_SETAC(m, WME_AC_VO); IEEE80211_NODE_STAT(ni, tx_mgmt); /* XXX tx_ctl? */ /* XXX locking */ /* init/bump attempts counter */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) == 0) tap->txa_attempts = 1; else tap->txa_attempts++; tap->txa_seqpending = seq; tap->txa_flags |= IEEE80211_AGGR_BARPEND; IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_11N, ni, "send BAR: tid %u ctl 0x%x start %u (attempt %d)", tid, barctl, seq, tap->txa_attempts); ret = ic->ic_raw_xmit(ni, m, NULL); if (ret != 0) { /* xmit failed, clear state flag */ tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; goto bad; } /* XXX hack against tx complete happening before timer is started */ if (tap->txa_flags & IEEE80211_AGGR_BARPEND) bar_start_timer(tap); return 0; bad: ieee80211_free_node(ni); return ret; -#undef senderr -} - -/* - * Send an action management frame. The arguments are stuff - * into a frame without inspection; the caller is assumed to - * prepare them carefully (e.g. based on the aggregation state). - */ -int -ieee80211_send_action(struct ieee80211_node *ni, - int category, int action, uint16_t args[4]) -{ -#define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) -#define ADDSHORT(frm, v) do { \ - frm[0] = (v) & 0xff; \ - frm[1] = (v) >> 8; \ - frm += 2; \ -} while (0) - struct ieee80211vap *vap = ni->ni_vap; - struct ieee80211com *ic = ni->ni_ic; - struct ieee80211_bpf_params params; - struct mbuf *m; - uint8_t *frm; - uint16_t baparamset; - int ret, addsize; - - KASSERT(ni != NULL, ("null node")); - - /* - * Hold a reference on the node so it doesn't go away until after - * the xmit is complete all the way in the driver. On error we - * will remove our reference. - */ - IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, - "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", - __func__, __LINE__, - ni, ether_sprintf(ni->ni_macaddr), - ieee80211_node_refcnt(ni)+1); - ieee80211_ref_node(ni); - - addsize = 0; - switch (category) { - case IEEE80211_ACTION_CAT_BA: - case IEEE80211_ACTION_CAT_HT: - addsize += sizeof(struct ieee80211_action_ba_addbaresponse); - break; - case IEEE80211_ACTION_CAT_MESHPEERING: - addsize += sizeof(uint16_t); /* capabilities */ - addsize += 2 + vap->iv_meshidlen; /* Mesh ID */ - addsize += sizeof(struct ieee80211_meshconf_ie); - /* On Open frames, the peer link ID is not sent */ - if (action == IEEE80211_ACTION_MESHPEERING_OPEN) - addsize += sizeof(struct ieee80211_meshpeer_ie) - 2; - else - addsize += sizeof(struct ieee80211_meshpeer_ie); - break; - } - m = ieee80211_getmgtframe(&frm, - ic->ic_headroom + sizeof(struct ieee80211_frame), - sizeof(uint16_t) /* action+category */ - /* XXX may action payload */ - + addsize - - ); - if (m == NULL) - senderr(ENOMEM, is_tx_nobuf); - - *frm++ = category; - *frm++ = action; - switch (category) { - case IEEE80211_ACTION_CAT_BA: - switch (action) { - case IEEE80211_ACTION_BA_ADDBA_REQUEST: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "send ADDBA request: dialogtoken %d " - "baparamset 0x%x (tid %d) batimeout 0x%x baseqctl 0x%x", - args[0], args[1], MS(args[1], IEEE80211_BAPS_TID), - args[2], args[3]); - - *frm++ = args[0]; /* dialog token */ - ADDSHORT(frm, args[1]); /* baparamset */ - ADDSHORT(frm, args[2]); /* batimeout */ - ADDSHORT(frm, args[3]); /* baseqctl */ - break; - case IEEE80211_ACTION_BA_ADDBA_RESPONSE: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "send ADDBA response: dialogtoken %d status %d " - "baparamset 0x%x (tid %d) batimeout %d", - args[0], args[1], args[2], - MS(args[2], IEEE80211_BAPS_TID), args[3]); - - *frm++ = args[0]; /* dialog token */ - ADDSHORT(frm, args[1]); /* statuscode */ - ADDSHORT(frm, args[2]); /* baparamset */ - ADDSHORT(frm, args[3]); /* batimeout */ - break; - case IEEE80211_ACTION_BA_DELBA: - /* XXX */ - baparamset = SM(args[0], IEEE80211_DELBAPS_TID) - | args[1] - ; - ADDSHORT(frm, baparamset); - ADDSHORT(frm, args[2]); /* reason code */ - - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "send DELBA action: tid %d, initiator %d reason %d", - args[0], args[1], args[2]); - break; - default: - goto badaction; - } - break; - case IEEE80211_ACTION_CAT_HT: - switch (action) { - case IEEE80211_ACTION_HT_TXCHWIDTH: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, - ni, "send HT txchwidth: width %d", - IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? 40 : 20 - ); - *frm++ = IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? - IEEE80211_A_HT_TXCHWIDTH_2040 : - IEEE80211_A_HT_TXCHWIDTH_20; - break; - default: - goto badaction; - } - break; - case IEEE80211_ACTION_CAT_MESHPEERING: - - switch (action) { - case IEEE80211_ACTION_MESHPEERING_OPEN: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni, - "send PEER OPEN action: lid %x", args[0]); - *frm++ = 0; /* capabilites */ - *frm++ = 0; - frm = ieee80211_add_meshid(frm, vap); - frm = ieee80211_add_meshconf(frm, vap); - *frm++ = IEEE80211_ELEMID_MESHPEER; - *frm++ = 3; /* len */ - *frm++ = IEEE80211_MESH_PEER_LINK_OPEN; /* subtype */ - ADDSHORT(frm, args[0]); /* local ID */ - break; - case IEEE80211_ACTION_MESHPEERING_CONFIRM: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni, - "send PEER CONFIRM action: lid %x, pid %x", - args[0], args[1]); - *frm++ = 0; /* capabilites */ - *frm++ = 0; - *frm++ = 0; /* status code */ - *frm++ = 0; - *frm++ = 0; /* AID */ - *frm++ = 0; - frm = ieee80211_add_meshid(frm, vap); - frm = ieee80211_add_meshconf(frm, vap); - *frm++ = IEEE80211_ELEMID_MESHPEER; - *frm++ = 5; /* len */ - *frm++ = IEEE80211_MESH_PEER_LINK_CONFIRM; /* subtype */ - ADDSHORT(frm, args[0]); - ADDSHORT(frm, args[1]); - break; - } - break; - default: - badaction: - IEEE80211_NOTE(vap, - IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, - "%s: unsupported category %d action %d", __func__, - category, action); - senderr(EINVAL, is_tx_unknownmgt); - /* NOTREACHED */ - } - m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); - - memset(¶ms, 0, sizeof(params)); - params.ibp_pri = WME_AC_VO; - params.ibp_rate0 = ni->ni_txparms->mgmtrate; - /* NB: we know all frames are unicast */ - params.ibp_try0 = ni->ni_txparms->maxretry; - params.ibp_power = ni->ni_txpower; - return ieee80211_mgmt_output(ni, m, IEEE80211_FC0_SUBTYPE_ACTION, - ¶ms); -bad: - ieee80211_free_node(ni); - if (m != NULL) - m_freem(m); - return ret; -#undef ADDSHORT #undef senderr } /* * Construct the MCS bit mask for inclusion * in an HT information element. */ static void ieee80211_set_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs) { int i; for (i = 0; i < rs->rs_nrates; i++) { int r = rs->rs_rates[i] & IEEE80211_RATE_VAL; if (r < IEEE80211_HTRATE_MAXSIZE) { /* XXX? */ /* NB: this assumes a particular implementation */ setbit(frm, r); } } } /* * Add body of an HTCAP information element. */ static uint8_t * ieee80211_add_htcap_body(uint8_t *frm, struct ieee80211_node *ni) { #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) struct ieee80211vap *vap = ni->ni_vap; uint16_t caps; int rxmax, density; /* HT capabilities */ caps = vap->iv_htcaps & 0xffff; /* * Note channel width depends on whether we are operating as * a sta or not. When operating as a sta we are generating * a request based on our desired configuration. Otherwise * we are operational and the channel attributes identify * how we've been setup (which might be different if a fixed * channel is specified). */ if (vap->iv_opmode == IEEE80211_M_STA) { /* override 20/40 use based on config */ if (vap->iv_flags_ext & IEEE80211_FEXT_USEHT40) caps |= IEEE80211_HTCAP_CHWIDTH40; else caps &= ~IEEE80211_HTCAP_CHWIDTH40; /* use advertised setting (XXX locally constraint) */ rxmax = MS(ni->ni_htparam, IEEE80211_HTCAP_MAXRXAMPDU); density = MS(ni->ni_htparam, IEEE80211_HTCAP_MPDUDENSITY); } else { /* override 20/40 use based on current channel */ if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) caps |= IEEE80211_HTCAP_CHWIDTH40; else caps &= ~IEEE80211_HTCAP_CHWIDTH40; rxmax = vap->iv_ampdu_rxmax; density = vap->iv_ampdu_density; } /* adjust short GI based on channel and config */ if ((vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI20) == 0) caps &= ~IEEE80211_HTCAP_SHORTGI20; if ((vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI40) == 0 || (caps & IEEE80211_HTCAP_CHWIDTH40) == 0) caps &= ~IEEE80211_HTCAP_SHORTGI40; ADDSHORT(frm, caps); /* HT parameters */ *frm = SM(rxmax, IEEE80211_HTCAP_MAXRXAMPDU) | SM(density, IEEE80211_HTCAP_MPDUDENSITY) ; frm++; /* pre-zero remainder of ie */ memset(frm, 0, sizeof(struct ieee80211_ie_htcap) - __offsetof(struct ieee80211_ie_htcap, hc_mcsset)); /* supported MCS set */ /* * XXX it would better to get the rate set from ni_htrates * so we can restrict it but for sta mode ni_htrates isn't * setup when we're called to form an AssocReq frame so for * now we're restricted to the default HT rate set. */ ieee80211_set_htrates(frm, &ieee80211_rateset_11n); frm += sizeof(struct ieee80211_ie_htcap) - __offsetof(struct ieee80211_ie_htcap, hc_mcsset); return frm; #undef ADDSHORT } /* * Add 802.11n HT capabilities information element */ uint8_t * ieee80211_add_htcap(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_HTCAP; frm[1] = sizeof(struct ieee80211_ie_htcap) - 2; return ieee80211_add_htcap_body(frm + 2, ni); } /* * Add Broadcom OUI wrapped standard HTCAP ie; this is * used for compatibility w/ pre-draft implementations. */ uint8_t * ieee80211_add_htcap_vendor(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_VENDOR; frm[1] = 4 + sizeof(struct ieee80211_ie_htcap) - 2; frm[2] = (BCM_OUI >> 0) & 0xff; frm[3] = (BCM_OUI >> 8) & 0xff; frm[4] = (BCM_OUI >> 16) & 0xff; frm[5] = BCM_OUI_HTCAP; return ieee80211_add_htcap_body(frm + 6, ni); } /* * Construct the MCS bit mask of basic rates * for inclusion in an HT information element. */ static void ieee80211_set_basic_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs) { int i; for (i = 0; i < rs->rs_nrates; i++) { int r = rs->rs_rates[i] & IEEE80211_RATE_VAL; if ((rs->rs_rates[i] & IEEE80211_RATE_BASIC) && r < IEEE80211_HTRATE_MAXSIZE) { /* NB: this assumes a particular implementation */ setbit(frm, r); } } } /* * Update the HTINFO ie for a beacon frame. */ void ieee80211_ht_update_beacon(struct ieee80211vap *vap, struct ieee80211_beacon_offsets *bo) { #define PROTMODE (IEEE80211_HTINFO_OPMODE|IEEE80211_HTINFO_NONHT_PRESENT) const struct ieee80211_channel *bsschan = vap->iv_bss->ni_chan; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_ie_htinfo *ht = (struct ieee80211_ie_htinfo *) bo->bo_htinfo; /* XXX only update on channel change */ ht->hi_ctrlchannel = ieee80211_chan2ieee(ic, bsschan); if (vap->iv_flags_ext & IEEE80211_FEXT_RIFS) ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PERM; else ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PROH; if (IEEE80211_IS_CHAN_HT40U(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_BELOW; else ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_NONE; if (IEEE80211_IS_CHAN_HT40(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_TXWIDTH_2040; /* protection mode */ ht->hi_byte2 = (ht->hi_byte2 &~ PROTMODE) | ic->ic_curhtprotmode; /* XXX propagate to vendor ie's */ #undef PROTMODE } /* * Add body of an HTINFO information element. * * NB: We don't use struct ieee80211_ie_htinfo because we can * be called to fillin both a standard ie and a compat ie that * has a vendor OUI at the front. */ static uint8_t * ieee80211_add_htinfo_body(uint8_t *frm, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; /* pre-zero remainder of ie */ memset(frm, 0, sizeof(struct ieee80211_ie_htinfo) - 2); /* primary/control channel center */ *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); if (vap->iv_flags_ext & IEEE80211_FEXT_RIFS) frm[0] = IEEE80211_HTINFO_RIFSMODE_PERM; else frm[0] = IEEE80211_HTINFO_RIFSMODE_PROH; if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_2NDCHAN_BELOW; else frm[0] |= IEEE80211_HTINFO_2NDCHAN_NONE; if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_TXWIDTH_2040; frm[1] = ic->ic_curhtprotmode; frm += 5; /* basic MCS set */ ieee80211_set_basic_htrates(frm, &ni->ni_htrates); frm += sizeof(struct ieee80211_ie_htinfo) - __offsetof(struct ieee80211_ie_htinfo, hi_basicmcsset); return frm; } /* * Add 802.11n HT information information element. */ uint8_t * ieee80211_add_htinfo(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_HTINFO; frm[1] = sizeof(struct ieee80211_ie_htinfo) - 2; return ieee80211_add_htinfo_body(frm + 2, ni); } /* * Add Broadcom OUI wrapped standard HTINFO ie; this is * used for compatibility w/ pre-draft implementations. */ uint8_t * ieee80211_add_htinfo_vendor(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_VENDOR; frm[1] = 4 + sizeof(struct ieee80211_ie_htinfo) - 2; frm[2] = (BCM_OUI >> 0) & 0xff; frm[3] = (BCM_OUI >> 8) & 0xff; frm[4] = (BCM_OUI >> 16) & 0xff; frm[5] = BCM_OUI_HTINFO; return ieee80211_add_htinfo_body(frm + 6, ni); } Index: projects/mesh11s/sys/net80211/ieee80211_ht.h =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_ht.h (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_ht.h (revision 191689) @@ -1,206 +1,202 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_HT_H_ #define _NET80211_IEEE80211_HT_H_ /* * 802.11n protocol implementation definitions. */ #define IEEE80211_AGGR_BAWMAX 64 /* max block ack window size */ /* threshold for aging overlapping non-HT bss */ #define IEEE80211_NONHT_PRESENT_AGE msecs_to_ticks(60*1000) typedef uint16_t ieee80211_seq; struct ieee80211_tx_ampdu { struct ieee80211_node *txa_ni; /* back pointer */ u_short txa_flags; #define IEEE80211_AGGR_IMMEDIATE 0x0001 /* BA policy */ #define IEEE80211_AGGR_XCHGPEND 0x0002 /* ADDBA response pending */ #define IEEE80211_AGGR_RUNNING 0x0004 /* ADDBA response received */ #define IEEE80211_AGGR_SETUP 0x0008 /* deferred state setup */ #define IEEE80211_AGGR_NAK 0x0010 /* peer NAK'd ADDBA request */ #define IEEE80211_AGGR_BARPEND 0x0020 /* BAR response pending */ uint8_t txa_ac; uint8_t txa_token; /* dialog token */ int txa_lastsample; /* ticks @ last traffic sample */ int txa_pkts; /* packets over last sample interval */ int txa_avgpps; /* filtered traffic over window */ int txa_qbytes; /* data queued (bytes) */ short txa_qframes; /* data queued (frames) */ ieee80211_seq txa_start; /* BA window left edge */ ieee80211_seq txa_seqpending; /* new txa_start pending BAR response */ uint16_t txa_wnd; /* BA window size */ uint8_t txa_attempts; /* # ADDBA/BAR requests w/o a response*/ int txa_nextrequest;/* soonest to make next request */ struct callout txa_timer; void *txa_private; /* driver-private storage */ }; /* return non-zero if AMPDU tx for the TID is running */ #define IEEE80211_AMPDU_RUNNING(tap) \ (((tap)->txa_flags & IEEE80211_AGGR_RUNNING) != 0) /* return non-zero if AMPDU tx for the TID is running or started */ #define IEEE80211_AMPDU_REQUESTED(tap) \ (((tap)->txa_flags & \ (IEEE80211_AGGR_RUNNING|IEEE80211_AGGR_XCHGPEND|IEEE80211_AGGR_NAK)) != 0) #define IEEE80211_AGGR_BITS \ "\20\1IMMEDIATE\2XCHGPEND\3RUNNING\4SETUP\5NAK" /* * Traffic estimator support. We estimate packets/sec for * each AC that is setup for AMPDU or will potentially be * setup for AMPDU. The traffic rate can be used to decide * when AMPDU should be setup (according to a threshold) * and is available for drivers to do things like cache * eviction when only a limited number of BA streams are * available and more streams are requested than available. */ static __inline void ieee80211_txampdu_update_pps(struct ieee80211_tx_ampdu *tap) { /* NB: scale factor of 2 was picked heuristically */ tap->txa_avgpps = ((tap->txa_avgpps << 2) - tap->txa_avgpps + tap->txa_pkts) >> 2; } /* * Count a packet towards the pps estimate. */ static __inline void ieee80211_txampdu_count_packet(struct ieee80211_tx_ampdu *tap) { /* XXX bound loop/do more crude estimate? */ while (ticks - tap->txa_lastsample >= hz) { ieee80211_txampdu_update_pps(tap); /* reset to start new sample interval */ tap->txa_pkts = 0; if (tap->txa_avgpps == 0) { tap->txa_lastsample = ticks; break; } tap->txa_lastsample += hz; } tap->txa_pkts++; } /* * Get the current pps estimate. If the average is out of * date due to lack of traffic then we decay the estimate * to account for the idle time. */ static __inline int ieee80211_txampdu_getpps(struct ieee80211_tx_ampdu *tap) { /* XXX bound loop/do more crude estimate? */ while (ticks - tap->txa_lastsample >= hz) { ieee80211_txampdu_update_pps(tap); tap->txa_pkts = 0; if (tap->txa_avgpps == 0) { tap->txa_lastsample = ticks; break; } tap->txa_lastsample += hz; } return tap->txa_avgpps; } struct ieee80211_rx_ampdu { int rxa_flags; int rxa_qbytes; /* data queued (bytes) */ short rxa_qframes; /* data queued (frames) */ ieee80211_seq rxa_seqstart; ieee80211_seq rxa_start; /* start of current BA window */ uint16_t rxa_wnd; /* BA window size */ int rxa_age; /* age of oldest frame in window */ int rxa_nframes; /* frames since ADDBA */ struct mbuf *rxa_m[IEEE80211_AGGR_BAWMAX]; }; void ieee80211_ht_attach(struct ieee80211com *); void ieee80211_ht_detach(struct ieee80211com *); void ieee80211_ht_vattach(struct ieee80211vap *); void ieee80211_ht_vdetach(struct ieee80211vap *); void ieee80211_ht_announce(struct ieee80211com *); struct ieee80211_mcs_rates { uint16_t ht20_rate_800ns; uint16_t ht20_rate_400ns; uint16_t ht40_rate_800ns; uint16_t ht40_rate_400ns; }; extern const struct ieee80211_mcs_rates ieee80211_htrates[16]; const struct ieee80211_htrateset *ieee80211_get_suphtrates( struct ieee80211com *, const struct ieee80211_channel *); struct ieee80211_node; int ieee80211_setup_htrates(struct ieee80211_node *, const uint8_t *htcap, int flags); void ieee80211_setup_basic_htrates(struct ieee80211_node *, const uint8_t *htinfo); struct mbuf *ieee80211_decap_amsdu(struct ieee80211_node *, struct mbuf *); int ieee80211_ampdu_reorder(struct ieee80211_node *, struct mbuf *); void ieee80211_recv_bar(struct ieee80211_node *, struct mbuf *); void ieee80211_ht_node_init(struct ieee80211_node *); void ieee80211_ht_node_cleanup(struct ieee80211_node *); void ieee80211_ht_node_age(struct ieee80211_node *); struct ieee80211_channel *ieee80211_ht_adjust_channel(struct ieee80211com *, struct ieee80211_channel *, int); void ieee80211_ht_wds_init(struct ieee80211_node *); void ieee80211_ht_node_join(struct ieee80211_node *); void ieee80211_ht_node_leave(struct ieee80211_node *); void ieee80211_htprot_update(struct ieee80211com *, int protmode); void ieee80211_ht_timeout(struct ieee80211com *); void ieee80211_parse_htcap(struct ieee80211_node *, const uint8_t *); void ieee80211_parse_htinfo(struct ieee80211_node *, const uint8_t *); void ieee80211_ht_updateparams(struct ieee80211_node *, const uint8_t *, const uint8_t *); void ieee80211_ht_updatehtcap(struct ieee80211_node *, const uint8_t *); -void ieee80211_recv_action(struct ieee80211_node *, - const uint8_t *, const uint8_t *); int ieee80211_ampdu_request(struct ieee80211_node *, struct ieee80211_tx_ampdu *); void ieee80211_ampdu_stop(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int); int ieee80211_send_bar(struct ieee80211_node *, struct ieee80211_tx_ampdu *, ieee80211_seq); -int ieee80211_send_action(struct ieee80211_node *, - int, int, uint16_t [4]); uint8_t *ieee80211_add_htcap(uint8_t *, struct ieee80211_node *); uint8_t *ieee80211_add_htcap_vendor(uint8_t *, struct ieee80211_node *); uint8_t *ieee80211_add_htinfo(uint8_t *, struct ieee80211_node *); uint8_t *ieee80211_add_htinfo_vendor(uint8_t *, struct ieee80211_node *); struct ieee80211_beacon_offsets; void ieee80211_ht_update_beacon(struct ieee80211vap *, struct ieee80211_beacon_offsets *); #endif /* _NET80211_IEEE80211_HT_H_ */ Index: projects/mesh11s/sys/net80211/ieee80211_input.c =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_input.c (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_input.c (revision 191689) @@ -1,872 +1,951 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif int ieee80211_input_all(struct ieee80211com *ic, struct mbuf *m, int rssi, int noise, u_int32_t rstamp) { struct ieee80211vap *vap; int type = -1; /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ieee80211_node *ni; struct mbuf *mcopy; /* * WDS vap's only receive directed traffic from the * station at the ``far end''. That traffic should * be passed through the AP vap the station is associated * to--so don't spam them with mcast frames. */ if (vap->iv_opmode == IEEE80211_M_WDS) continue; if (TAILQ_NEXT(vap, iv_next) != NULL) { /* * Packet contents are changed by ieee80211_decap * so do a deep copy of the packet. */ mcopy = m_dup(m, M_DONTWAIT); if (mcopy == NULL) { /* XXX stat+msg */ continue; } } else { mcopy = m; m = NULL; } ni = ieee80211_ref_node(vap->iv_bss); type = ieee80211_input(ni, mcopy, rssi, noise, rstamp); ieee80211_free_node(ni); } if (m != NULL) /* no vaps, reclaim mbuf */ m_freem(m); return type; } /* * This function reassembles fragments. * * XXX should handle 3 concurrent reassemblies per-spec. */ struct mbuf * ieee80211_defrag(struct ieee80211_node *ni, struct mbuf *m, int hdrspace) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); struct ieee80211_frame *lwh; uint16_t rxseq; uint8_t fragno; uint8_t more_frag = wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG; struct mbuf *mfrag; KASSERT(!IEEE80211_IS_MULTICAST(wh->i_addr1), ("multicast fragm?")); rxseq = le16toh(*(uint16_t *)wh->i_seq); fragno = rxseq & IEEE80211_SEQ_FRAG_MASK; /* Quick way out, if there's nothing to defragment */ if (!more_frag && fragno == 0 && ni->ni_rxfrag[0] == NULL) return m; /* * Remove frag to insure it doesn't get reaped by timer. */ if (ni->ni_table == NULL) { /* * Should never happen. If the node is orphaned (not in * the table) then input packets should not reach here. * Otherwise, a concurrent request that yanks the table * should be blocked by other interlocking and/or by first * shutting the driver down. Regardless, be defensive * here and just bail */ /* XXX need msg+stat */ m_freem(m); return NULL; } IEEE80211_NODE_LOCK(ni->ni_table); mfrag = ni->ni_rxfrag[0]; ni->ni_rxfrag[0] = NULL; IEEE80211_NODE_UNLOCK(ni->ni_table); /* * Validate new fragment is in order and * related to the previous ones. */ if (mfrag != NULL) { uint16_t last_rxseq; lwh = mtod(mfrag, struct ieee80211_frame *); last_rxseq = le16toh(*(uint16_t *)lwh->i_seq); /* NB: check seq # and frag together */ if (rxseq != last_rxseq+1 || !IEEE80211_ADDR_EQ(wh->i_addr1, lwh->i_addr1) || !IEEE80211_ADDR_EQ(wh->i_addr2, lwh->i_addr2)) { /* * Unrelated fragment or no space for it, * clear current fragments. */ m_freem(mfrag); mfrag = NULL; } } if (mfrag == NULL) { if (fragno != 0) { /* !first fragment, discard */ vap->iv_stats.is_rx_defrag++; IEEE80211_NODE_STAT(ni, rx_defrag); m_freem(m); return NULL; } mfrag = m; } else { /* concatenate */ m_adj(m, hdrspace); /* strip header */ m_cat(mfrag, m); /* NB: m_cat doesn't update the packet header */ mfrag->m_pkthdr.len += m->m_pkthdr.len; /* track last seqnum and fragno */ lwh = mtod(mfrag, struct ieee80211_frame *); *(uint16_t *) lwh->i_seq = *(uint16_t *) wh->i_seq; } if (more_frag) { /* more to come, save */ ni->ni_rxfragstamp = ticks; ni->ni_rxfrag[0] = mfrag; mfrag = NULL; } return mfrag; } void ieee80211_deliver_data(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { struct ether_header *eh = mtod(m, struct ether_header *); struct ifnet *ifp = vap->iv_ifp; /* NB: see hostap_deliver_data, this path doesn't handle hostap */ KASSERT(vap->iv_opmode != IEEE80211_M_HOSTAP, ("gack, hostap")); /* * Do accounting. */ ifp->if_ipackets++; IEEE80211_NODE_STAT(ni, rx_data); IEEE80211_NODE_STAT_ADD(ni, rx_bytes, m->m_pkthdr.len); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { m->m_flags |= M_MCAST; /* XXX M_BCAST? */ IEEE80211_NODE_STAT(ni, rx_mcast); } else IEEE80211_NODE_STAT(ni, rx_ucast); m->m_pkthdr.rcvif = ifp; /* clear driver/net80211 flags before passing up */ m->m_flags &= ~M_80211_RX; if (ni->ni_vlan != 0) { /* attach vlan tag */ m->m_pkthdr.ether_vtag = ni->ni_vlan; m->m_flags |= M_VLANTAG; } ifp->if_input(ifp, m); } struct mbuf * ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen) { struct ieee80211_qosframe_addr4 wh; /* Max size address frames */ struct ether_header *eh; struct llc *llc; if (m->m_len < hdrlen + sizeof(*llc) && (m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) { /* XXX stat, msg */ return NULL; } memcpy(&wh, mtod(m, caddr_t), hdrlen); llc = (struct llc *)(mtod(m, caddr_t) + hdrlen); if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP && llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 && llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 && /* NB: preserve AppleTalk frames that have a native SNAP hdr */ !(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) || llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) { m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh)); llc = NULL; } else { m_adj(m, hdrlen - sizeof(*eh)); } eh = mtod(m, struct ether_header *); switch (wh.i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2); break; case IEEE80211_FC1_DIR_TODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2); break; case IEEE80211_FC1_DIR_FROMDS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr3); break; case IEEE80211_FC1_DIR_DSTODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr4); break; } #ifdef ALIGNED_POINTER if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) { struct mbuf *n, *n0, **np; caddr_t newdata; int off, pktlen; n0 = NULL; np = &n0; off = 0; pktlen = m->m_pkthdr.len; while (pktlen > off) { if (n0 == NULL) { MGETHDR(n, M_DONTWAIT, MT_DATA); if (n == NULL) { m_freem(m); return NULL; } M_MOVE_PKTHDR(n, m); n->m_len = MHLEN; } else { MGET(n, M_DONTWAIT, MT_DATA); if (n == NULL) { m_freem(m); m_freem(n0); return NULL; } n->m_len = MLEN; } if (pktlen - off >= MINCLSIZE) { MCLGET(n, M_DONTWAIT); if (n->m_flags & M_EXT) n->m_len = n->m_ext.ext_size; } if (n0 == NULL) { newdata = (caddr_t)ALIGN(n->m_data + sizeof(*eh)) - sizeof(*eh); n->m_len -= newdata - n->m_data; n->m_data = newdata; } if (n->m_len > pktlen - off) n->m_len = pktlen - off; m_copydata(m, off, n->m_len, mtod(n, caddr_t)); off += n->m_len; *np = n; np = &n->m_next; } m_freem(m); m = n0; } #endif /* ALIGNED_POINTER */ if (llc != NULL) { eh = mtod(m, struct ether_header *); eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh)); } return m; } /* * Decap a frame encapsulated in a fast-frame/A-MSDU. */ struct mbuf * ieee80211_decap1(struct mbuf *m, int *framelen) { #define FF_LLC_SIZE (sizeof(struct ether_header) + sizeof(struct llc)) struct ether_header *eh; struct llc *llc; /* * The frame has an 802.3 header followed by an 802.2 * LLC header. The encapsulated frame length is in the * first header type field; save that and overwrite it * with the true type field found in the second. Then * copy the 802.3 header up to where it belongs and * adjust the mbuf contents to remove the void. */ if (m->m_len < FF_LLC_SIZE && (m = m_pullup(m, FF_LLC_SIZE)) == NULL) return NULL; eh = mtod(m, struct ether_header *); /* 802.3 header is first */ llc = (struct llc *)&eh[1]; /* 802.2 header follows */ *framelen = ntohs(eh->ether_type) /* encap'd frame size */ + sizeof(struct ether_header) - sizeof(struct llc); eh->ether_type = llc->llc_un.type_snap.ether_type; ovbcopy(eh, mtod(m, uint8_t *) + sizeof(struct llc), sizeof(struct ether_header)); m_adj(m, sizeof(struct llc)); return m; #undef FF_LLC_SIZE } /* * Install received rate set information in the node's state block. */ int ieee80211_setup_rates(struct ieee80211_node *ni, const uint8_t *rates, const uint8_t *xrates, int flags) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_rateset *rs = &ni->ni_rates; memset(rs, 0, sizeof(*rs)); rs->rs_nrates = rates[1]; memcpy(rs->rs_rates, rates + 2, rs->rs_nrates); if (xrates != NULL) { uint8_t nxrates; /* * Tack on 11g extended supported rate element. */ nxrates = xrates[1]; if (rs->rs_nrates + nxrates > IEEE80211_RATE_MAXSIZE) { nxrates = IEEE80211_RATE_MAXSIZE - rs->rs_nrates; IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE, ni, "extended rate set too large; only using " "%u of %u rates", nxrates, xrates[1]); vap->iv_stats.is_rx_rstoobig++; } memcpy(rs->rs_rates + rs->rs_nrates, xrates+2, nxrates); rs->rs_nrates += nxrates; } return ieee80211_fix_rate(ni, rs, flags); } /* * Send a management frame error response to the specified * station. If ni is associated with the station then use * it; otherwise allocate a temporary node suitable for * transmitting the frame and then free the reference so * it will go away as soon as the frame has been transmitted. */ void ieee80211_send_error(struct ieee80211_node *ni, const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg) { struct ieee80211vap *vap = ni->ni_vap; int istmp; if (ni == vap->iv_bss) { if (vap->iv_state != IEEE80211_S_RUN) { /* * XXX hack until we get rid of this routine. * We can be called prior to the vap reaching * run state under certain conditions in which * case iv_bss->ni_chan will not be setup. * Check for this explicitly and and just ignore * the request. */ return; } ni = ieee80211_tmp_node(vap, mac); if (ni == NULL) { /* XXX msg */ return; } istmp = 1; } else istmp = 0; IEEE80211_SEND_MGMT(ni, subtype, arg); if (istmp) ieee80211_free_node(ni); } int ieee80211_alloc_challenge(struct ieee80211_node *ni) { if (ni->ni_challenge == NULL) ni->ni_challenge = (uint32_t *) malloc(IEEE80211_CHALLENGE_LEN, M_80211_NODE, M_NOWAIT); if (ni->ni_challenge == NULL) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni, "%s", "shared key challenge alloc failed"); /* XXX statistic */ } return (ni->ni_challenge != NULL); } /* * Parse a Beacon or ProbeResponse frame and return the * useful information in an ieee80211_scanparams structure. * Status is set to 0 if no problems were found; otherwise * a bitmask of IEEE80211_BPARSE_* items is returned that * describes the problems detected. */ int ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m, struct ieee80211_scanparams *scan) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm; wh = mtod(m, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m, uint8_t *) + m->m_len; scan->status = 0; /* * beacon/probe response frame format * [8] time stamp * [2] beacon interval * [2] capability information * [tlv] ssid * [tlv] supported rates * [tlv] country information * [tlv] parameter set (FH/DS) * [tlv] erp information * [tlv] extended supported rates * [tlv] WME * [tlv] WPA or RSN * [tlv] HT capabilities * [tlv] HT information * [tlv] Atheros capabilities * [tlv] Mesh ID * [tlv] Mesh Configuration * [tlv] Mesh TIM */ IEEE80211_VERIFY_LENGTH(efrm - frm, 12, return (scan->status = IEEE80211_BPARSE_BADIELEN)); memset(scan, 0, sizeof(*scan)); scan->tstamp = frm; frm += 8; scan->bintval = le16toh(*(uint16_t *)frm); frm += 2; scan->capinfo = le16toh(*(uint16_t *)frm); frm += 2; scan->bchan = ieee80211_chan2ieee(ic, ic->ic_curchan); scan->chan = scan->bchan; scan->ies = frm; scan->ies_len = efrm - frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return (scan->status = IEEE80211_BPARSE_BADIELEN)); switch (*frm) { case IEEE80211_ELEMID_SSID: scan->ssid = frm; break; case IEEE80211_ELEMID_RATES: scan->rates = frm; break; case IEEE80211_ELEMID_COUNTRY: scan->country = frm; break; case IEEE80211_ELEMID_FHPARMS: if (ic->ic_phytype == IEEE80211_T_FH) { scan->fhdwell = LE_READ_2(&frm[2]); scan->chan = IEEE80211_FH_CHAN(frm[4], frm[5]); scan->fhindex = frm[6]; } break; case IEEE80211_ELEMID_DSPARMS: /* * XXX hack this since depending on phytype * is problematic for multi-mode devices. */ if (ic->ic_phytype != IEEE80211_T_FH) scan->chan = frm[2]; break; case IEEE80211_ELEMID_TIM: /* XXX ATIM? */ scan->tim = frm; scan->timoff = frm - mtod(m, uint8_t *); break; case IEEE80211_ELEMID_IBSSPARMS: case IEEE80211_ELEMID_CFPARMS: case IEEE80211_ELEMID_PWRCNSTR: /* NB: avoid debugging complaints */ break; case IEEE80211_ELEMID_XRATES: scan->xrates = frm; break; case IEEE80211_ELEMID_ERP: if (frm[1] != 1) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID, wh, "ERP", "bad len %u", frm[1]); vap->iv_stats.is_rx_elem_toobig++; break; } scan->erp = frm[2] | 0x100; break; case IEEE80211_ELEMID_HTCAP: scan->htcap = frm; break; case IEEE80211_ELEMID_RSN: scan->rsn = frm; break; case IEEE80211_ELEMID_HTINFO: scan->htinfo = frm; break; case IEEE80211_ELEMID_MESHID: scan->meshid = frm; break; case IEEE80211_ELEMID_MESHCONF: scan->meshconf = frm; break; case IEEE80211_ELEMID_MESHTIM: /* XXXRP TBD */ break; case IEEE80211_ELEMID_VENDOR: if (iswpaoui(frm)) scan->wpa = frm; else if (iswmeparam(frm) || iswmeinfo(frm)) scan->wme = frm; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(frm)) scan->ath = frm; #endif #ifdef IEEE80211_SUPPORT_TDMA else if (istdmaoui(frm)) scan->tdma = frm; #endif else if (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT) { /* * Accept pre-draft HT ie's if the * standard ones have not been seen. */ if (ishtcapoui(frm)) { if (scan->htcap == NULL) scan->htcap = frm; } else if (ishtinfooui(frm)) { if (scan->htinfo == NULL) scan->htcap = frm; } } break; default: IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID, wh, "unhandled", "id %u, len %u", *frm, frm[1]); vap->iv_stats.is_rx_elem_unknown++; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(scan->rates, IEEE80211_RATE_MAXSIZE, scan->status |= IEEE80211_BPARSE_RATES_INVALID); if (scan->rates != NULL && scan->xrates != NULL) { /* * NB: don't process XRATES if RATES is missing. This * avoids a potential null ptr deref and should be ok * as the return code will already note RATES is missing * (so callers shouldn't otherwise process the frame). */ IEEE80211_VERIFY_ELEMENT(scan->xrates, IEEE80211_RATE_MAXSIZE - scan->rates[1], scan->status |= IEEE80211_BPARSE_XRATES_INVALID); } IEEE80211_VERIFY_ELEMENT(scan->ssid, IEEE80211_NWID_LEN, scan->status |= IEEE80211_BPARSE_SSID_INVALID); if (scan->chan != scan->bchan && ic->ic_phytype != IEEE80211_T_FH) { /* * Frame was received on a channel different from the * one indicated in the DS params element id; * silently discard it. * * NB: this can happen due to signal leakage. * But we should take it for FH phy because * the rssi value should be correct even for * different hop pattern in FH. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, wh, NULL, "for off-channel %u", scan->chan); vap->iv_stats.is_rx_chanmismatch++; scan->status |= IEEE80211_BPARSE_OFFCHAN; } if (!(IEEE80211_BINTVAL_MIN <= scan->bintval && scan->bintval <= IEEE80211_BINTVAL_MAX)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, wh, NULL, "bogus beacon interval", scan->bintval); vap->iv_stats.is_rx_badbintval++; scan->status |= IEEE80211_BPARSE_BINTVAL_INVALID; } if (scan->country != NULL) { /* * Validate we have at least enough data to extract * the country code. Not sure if we should return an * error instead of discarding the IE; consider this * being lenient as we don't depend on the data for * correct operation. */ IEEE80211_VERIFY_LENGTH(scan->country[1], 3 * sizeof(uint8_t), scan->country = NULL); } /* * Process HT ie's. This is complicated by our * accepting both the standard ie's and the pre-draft * vendor OUI ie's that some vendors still use/require. */ if (scan->htcap != NULL) { IEEE80211_VERIFY_LENGTH(scan->htcap[1], scan->htcap[0] == IEEE80211_ELEMID_VENDOR ? 4 + sizeof(struct ieee80211_ie_htcap)-2 : sizeof(struct ieee80211_ie_htcap)-2, scan->htcap = NULL); } if (scan->htinfo != NULL) { IEEE80211_VERIFY_LENGTH(scan->htinfo[1], scan->htinfo[0] == IEEE80211_ELEMID_VENDOR ? 4 + sizeof(struct ieee80211_ie_htinfo)-2 : sizeof(struct ieee80211_ie_htinfo)-2, scan->htinfo = NULL); } return scan->status; } /* * Parse an Action frame. Return 0 on success, non-zero on failure. */ int ieee80211_parse_action(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_action *ia; struct ieee80211_frame *wh; uint8_t *frm, *efrm; /* * action frame format: * [1] category * [1] action * [tlv] parameters */ wh = mtod(m, struct ieee80211_frame *); frm = (u_int8_t *)&wh[1]; efrm = mtod(m, u_int8_t *) + m->m_len; IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action), return EINVAL); ia = (const struct ieee80211_action *) frm; vap->iv_stats.is_rx_action++; IEEE80211_NODE_STAT(ni, rx_action); /* verify frame payloads but defer processing */ /* XXX maybe push this to method */ switch (ia->ia_category) { case IEEE80211_ACTION_CAT_BA: switch (ia->ia_action) { case IEEE80211_ACTION_BA_ADDBA_REQUEST: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_addbarequest), return EINVAL); break; case IEEE80211_ACTION_BA_ADDBA_RESPONSE: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_addbaresponse), return EINVAL); break; case IEEE80211_ACTION_BA_DELBA: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_delba), return EINVAL); break; } break; case IEEE80211_ACTION_CAT_HT: switch (ia->ia_action) { case IEEE80211_ACTION_HT_TXCHWIDTH: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ht_txchwidth), return EINVAL); break; case IEEE80211_ACTION_HT_MIMOPWRSAVE: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ht_mimopowersave), return EINVAL); break; } break; } return 0; } +/* + * Process a received 802.11 action frame. + * Aggregation-related frames are assumed to be handled + * already; we handle any other frames we can, otherwise + * complain about being unsupported (with debugging). + */ +void +ieee80211_recv_action(struct ieee80211_node *ni, + const uint8_t *frm, const uint8_t *efrm) +{ + struct ieee80211vap *vap = ni->ni_vap; + const struct ieee80211_action *ia; + int chw; + + ia = (const struct ieee80211_action *) frm; + switch (ia->ia_category) { + case IEEE80211_ACTION_CAT_BA: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: BA action %d not implemented", __func__, + ia->ia_action); + vap->iv_stats.is_rx_mgtdiscard++; + break; + case IEEE80211_ACTION_CAT_HT: + switch (ia->ia_action) { + case IEEE80211_ACTION_HT_TXCHWIDTH: + chw = frm[2] == IEEE80211_A_HT_TXCHWIDTH_2040 ? 40 : 20; + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: HT txchwidth, width %d%s", + __func__, chw, ni->ni_chw != chw ? "*" : ""); + if (chw != ni->ni_chw) { + ni->ni_chw = chw; + /* XXX notify on change */ + } + break; + case IEEE80211_ACTION_HT_MIMOPWRSAVE: { + const struct ieee80211_action_ht_mimopowersave *mps = + (const struct ieee80211_action_ht_mimopowersave *) ia; + /* XXX check iv_htcaps */ + if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA) + ni->ni_flags |= IEEE80211_NODE_MIMO_PS; + else + ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS; + if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_MODE) + ni->ni_flags |= IEEE80211_NODE_MIMO_RTS; + else + ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; + /* XXX notify on change */ + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: HT MIMO PS (%s%s)", __func__, + (ni->ni_flags & IEEE80211_NODE_MIMO_PS) ? + "on" : "off", + (ni->ni_flags & IEEE80211_NODE_MIMO_RTS) ? + "+rts" : "" + ); + break; + } + default: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: HT action %d not implemented", __func__, + ia->ia_action); + vap->iv_stats.is_rx_mgtdiscard++; + break; + } + break; + default: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: category %d not implemented", __func__, + ia->ia_category); + vap->iv_stats.is_rx_mgtdiscard++; + break; + } +} + + #ifdef IEEE80211_DEBUG /* * Debugging support. */ void ieee80211_ssid_mismatch(struct ieee80211vap *vap, const char *tag, uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid) { printf("[%s] discard %s frame, ssid mismatch: ", ether_sprintf(mac), tag); ieee80211_print_essid(ssid + 2, ssid[1]); printf("\n"); } /* * Return the bssid of a frame. */ static const uint8_t * ieee80211_getbssid(struct ieee80211vap *vap, const struct ieee80211_frame *wh) { if (vap->iv_opmode == IEEE80211_M_STA) return wh->i_addr2; if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) != IEEE80211_FC1_DIR_NODS) return wh->i_addr1; if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PS_POLL) return wh->i_addr1; return wh->i_addr3; } #include void ieee80211_note(struct ieee80211vap *vap, const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "%s", buf); /* NB: no \n */ } void ieee80211_note_frame(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(ieee80211_getbssid(vap, wh)), buf); } void ieee80211_note_mac(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(mac), buf); } void ieee80211_discard_frame(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(ieee80211_getbssid(vap, wh))); if (type == NULL) { printf("%s frame, ", ieee80211_mgt_subtype_name[ (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); } else printf("%s frame, ", type); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } void ieee80211_discard_ie(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(ieee80211_getbssid(vap, wh))); if (type != NULL) printf("%s information element, ", type); else printf("information element, "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } void ieee80211_discard_mac(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(mac)); if (type != NULL) printf("%s frame, ", type); else printf("frame, "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } #endif /* IEEE80211_DEBUG */ Index: projects/mesh11s/sys/net80211/ieee80211_input.h =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_input.h (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_input.h (revision 191689) @@ -1,159 +1,161 @@ /*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_INPUT_H_ #define _NET80211_IEEE80211_INPUT_H_ /* Verify the existence and length of __elem or get out. */ #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do { \ if ((__elem) == NULL) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "%s", "no " #__elem ); \ vap->iv_stats.is_rx_elem_missing++; \ _action; \ } else if ((__elem)[1] > (__maxlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "bad " #__elem " len %d", (__elem)[1]); \ vap->iv_stats.is_rx_elem_toobig++; \ _action; \ } \ } while (0) #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do { \ if ((_len) < (_minlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "ie too short, got %d, expected %d", \ (_len), (_minlen)); \ vap->iv_stats.is_rx_elem_toosmall++; \ _action; \ } \ } while (0) #ifdef IEEE80211_DEBUG void ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag, uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid); #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ if (ieee80211_msg_input(vap)) \ ieee80211_ssid_mismatch(vap, \ ieee80211_mgt_subtype_name[subtype >> \ IEEE80211_FC0_SUBTYPE_SHIFT], \ wh->i_addr2, _ssid); \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #else /* !IEEE80211_DEBUG */ #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #endif /* !IEEE80211_DEBUG */ /* unalligned little endian access */ #define LE_READ_2(p) \ ((uint16_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8))) #define LE_READ_4(p) \ ((uint32_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8) | \ (((const uint8_t *)(p))[2] << 16) | \ (((const uint8_t *)(p))[3] << 24))) static __inline int iswpaoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); } static __inline int iswmeoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI); } static __inline int iswmeparam(const uint8_t *frm) { return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_PARAM_OUI_SUBTYPE; } static __inline int iswmeinfo(const uint8_t *frm) { return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_INFO_OUI_SUBTYPE; } static __inline int isatherosoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); } static __inline int istdmaoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI); } static __inline int ishtcapoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI); } static __inline int ishtinfooui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI); } void ieee80211_deliver_data(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); struct mbuf *ieee80211_defrag(struct ieee80211_node *, struct mbuf *, int); struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int); struct mbuf *ieee80211_decap1(struct mbuf *, int *); int ieee80211_setup_rates(struct ieee80211_node *ni, const uint8_t *rates, const uint8_t *xrates, int flags); void ieee80211_send_error(struct ieee80211_node *, const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg); int ieee80211_alloc_challenge(struct ieee80211_node *); int ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *, struct ieee80211_scanparams *); int ieee80211_parse_action(struct ieee80211_node *, struct mbuf *); +void ieee80211_recv_action(struct ieee80211_node *, const uint8_t *, + const uint8_t *); #endif /* _NET80211_IEEE80211_INPUT_H_ */ Index: projects/mesh11s/sys/net80211/ieee80211_output.c =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_output.c (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_output.c (revision 191689) @@ -1,2851 +1,3049 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #include #ifdef INET #include #include #include #include #endif #define ETHER_HEADER_COPY(dst, src) \ memcpy(dst, src, sizeof(struct ether_header)) static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *, u_int hdrsize, u_int ciphdrsize, u_int mtu); static void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int); #ifdef IEEE80211_DEBUG /* * Decide if an outbound management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: return (vap->iv_opmode == IEEE80211_M_IBSS); } return 1; } #endif /* * Start method for vap's. All packets from the stack come * through here. We handle common processing of the packets * before dispatching them to the underlying device. */ void ieee80211_start(struct ifnet *ifp) { #define IS_DWDS(vap) \ (vap->iv_opmode == IEEE80211_M_WDS && \ (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; struct ifnet *parent = ic->ic_ifp; struct ieee80211_node *ni; struct mbuf *m; struct ether_header *eh; int error; /* NB: parent must be up and running */ if (!IFNET_IS_UP_RUNNING(parent)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, parent %s not up+running\n", __func__, parent->if_xname); /* XXX stat */ return; } if (vap->iv_state == IEEE80211_S_SLEEP) { /* * In power save, wakeup device for transmit. */ ieee80211_new_state(vap, IEEE80211_S_RUN, 0); return; } /* * No data frames go out unless we're running. * Note in particular this covers CAC and CSA * states (though maybe we should check muting * for CSA). */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_LOCK(ic); /* re-check under the com lock to avoid races */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, in %s state\n", __func__, ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_tx_badstate++; ifp->if_drv_flags |= IFF_DRV_OACTIVE; IEEE80211_UNLOCK(ic); return; } IEEE80211_UNLOCK(ic); } for (;;) { IFQ_DEQUEUE(&ifp->if_snd, m); if (m == NULL) break; /* * Sanitize mbuf flags for net80211 use. We cannot * clear M_PWR_SAV because this may be set for frames * that are re-submitted from the power save queue. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~(M_80211_TX - M_PWR_SAV); /* * Cancel any background scan. */ if (ic->ic_flags & IEEE80211_F_SCAN) ieee80211_cancel_anyscan(vap); /* * Find the node for the destination so we can do * things like power save and fast frames aggregation. * * NB: past this point various code assumes the first * mbuf has the 802.3 header present (and contiguous). */ ni = NULL; if (m->m_len < sizeof(struct ether_header) && (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "discard frame, %s\n", "m_pullup failed"); vap->iv_stats.is_tx_nobuf++; /* XXX */ ifp->if_oerrors++; continue; } eh = mtod(m, struct ether_header *); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { if (IS_DWDS(vap)) { /* * Only unicast frames from the above go out * DWDS vaps; multicast frames are handled by * dispatching the frame as it comes through * the AP vap (see below). */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_WDS, eh->ether_dhost, "mcast", "%s", "on DWDS"); vap->iv_stats.is_dwds_mcast++; m_freem(m); continue; } if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* * Spam DWDS vap's w/ multicast traffic. */ /* XXX only if dwds in use? */ ieee80211_dwds_mcast(vap, m); } } ni = ieee80211_find_txnode(vap, eh->ether_dhost); if (ni == NULL) { /* NB: ieee80211_find_txnode does stat+msg */ ifp->if_oerrors++; m_freem(m); continue; } if (ni->ni_associd == 0 && (ni->ni_flags & IEEE80211_NODE_ASSOCID)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, eh->ether_dhost, NULL, "sta not associated (type 0x%04x)", htons(eh->ether_type)); vap->iv_stats.is_tx_notassoc++; ifp->if_oerrors++; m_freem(m); ieee80211_free_node(ni); continue; } if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && (m->m_flags & M_PWR_SAV) == 0) { /* * Station in power save mode; pass the frame * to the 802.11 layer and continue. We'll get * the frame back when the time is right. * XXX lose WDS vap linkage? */ (void) ieee80211_pwrsave(ni, m); ieee80211_free_node(ni); continue; } /* calculate priority so drivers can find the tx queue */ if (ieee80211_classify(ni, m)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, eh->ether_dhost, NULL, "%s", "classification failure"); vap->iv_stats.is_tx_classify++; ifp->if_oerrors++; m_freem(m); ieee80211_free_node(ni); continue; } /* * Stash the node pointer. Note that we do this after * any call to ieee80211_dwds_mcast because that code * uses any existing value for rcvif to identify the * interface it (might have been) received on. */ m->m_pkthdr.rcvif = (void *)ni; BPF_MTAP(ifp, m); /* 802.3 tx */ /* * Check if A-MPDU tx aggregation is setup or if we * should try to enable it. The sta must be associated * with HT and A-MPDU enabled for use. When the policy * routine decides we should enable A-MPDU we issue an * ADDBA request and wait for a reply. The frame being * encapsulated will go out w/o using A-MPDU, or possibly * it might be collected by the driver and held/retransmit. * The default ic_ampdu_enable routine handles staggering * ADDBA requests in case the receiver NAK's us or we are * otherwise unable to establish a BA stream. */ if ((ni->ni_flags & IEEE80211_NODE_AMPDU_TX) && (vap->iv_flags_ext & IEEE80211_FEXT_AMPDU_TX) && (m->m_flags & M_EAPOL) == 0) { const int ac = M_WME_GETAC(m); struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac]; ieee80211_txampdu_count_packet(tap); if (IEEE80211_AMPDU_RUNNING(tap)) { /* * Operational, mark frame for aggregation. * * XXX do tx aggregation here */ m->m_flags |= M_AMPDU_MPDU; } else if (!IEEE80211_AMPDU_REQUESTED(tap) && ic->ic_ampdu_enable(ni, tap)) { /* * Not negotiated yet, request service. */ ieee80211_ampdu_request(ni, tap); /* XXX hold frame for reply? */ } } #ifdef IEEE80211_SUPPORT_SUPERG else if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF)) { m = ieee80211_ff_check(ni, m); if (m == NULL) { /* NB: any ni ref held on stageq */ continue; } } #endif /* IEEE80211_SUPPORT_SUPERG */ if (__predict_true((vap->iv_caps & IEEE80211_C_8023ENCAP) == 0)) { /* * Encapsulate the packet in prep for transmission. */ m = ieee80211_encap(vap, ni, m); if (m == NULL) { /* NB: stat+msg handled in ieee80211_encap */ ieee80211_free_node(ni); continue; } } /* XXX fragmented frames not handled */ if (bpf_peers_present(vap->iv_rawbpf)) bpf_mtap(vap->iv_rawbpf, m); error = parent->if_transmit(parent, m); if (error != 0) { /* NB: IFQ_HANDOFF reclaims mbuf */ ieee80211_free_node(ni); } else { ifp->if_opackets++; } ic->ic_lastdata = ticks; } #undef IS_DWDS } /* * 802.11 output routine. This is (currently) used only to * connect bpf write calls to the 802.11 layer for injecting * raw 802.11 frames. */ int ieee80211_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct route *ro) { #define senderr(e) do { error = (e); goto bad;} while (0) struct ieee80211_node *ni = NULL; struct ieee80211vap *vap; struct ieee80211_frame *wh; int error; if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { /* * Short-circuit requests if the vap is marked OACTIVE * as this is used when tearing down state to indicate * the vap may be gone. This can also happen because a * packet came down through ieee80211_start before the * vap entered RUN state in which case it's also ok to * just drop the frame. This should not be necessary * but callers of if_output don't check OACTIVE. */ senderr(ENETDOWN); } vap = ifp->if_softc; /* * Hand to the 802.3 code if not tagged as * a raw 802.11 frame. */ if (dst->sa_family != AF_IEEE80211) return vap->iv_output(ifp, m, dst, ro); #ifdef MAC error = mac_check_ifnet_transmit(ifp, m); if (error) senderr(error); #endif if (ifp->if_flags & IFF_MONITOR) senderr(ENETDOWN); if (!IFNET_IS_UP_RUNNING(ifp)) senderr(ENETDOWN); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, "block %s frame in CAC state\n", "raw data"); vap->iv_stats.is_tx_badstate++; senderr(EIO); /* XXX */ } /* XXX bypass bridge, pfil, carp, etc. */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_ack)) senderr(EIO); /* XXX */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) senderr(EIO); /* XXX */ /* locate destination node */ switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: case IEEE80211_FC1_DIR_FROMDS: ni = ieee80211_find_txnode(vap, wh->i_addr1); break; case IEEE80211_FC1_DIR_TODS: case IEEE80211_FC1_DIR_DSTODS: if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) senderr(EIO); /* XXX */ ni = ieee80211_find_txnode(vap, wh->i_addr3); break; default: senderr(EIO); /* XXX */ } if (ni == NULL) { /* * Permit packets w/ bpf params through regardless * (see below about sa_len). */ if (dst->sa_len == 0) senderr(EHOSTUNREACH); ni = ieee80211_ref_node(vap->iv_bss); } /* * Sanitize mbuf for net80211 flags leaked from above. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~M_80211_TX; /* calculate priority so drivers can find the tx queue */ /* XXX assumes an 802.3 frame */ if (ieee80211_classify(ni, m)) senderr(EIO); /* XXX */ if (bpf_peers_present(vap->iv_rawbpf)) bpf_mtap(vap->iv_rawbpf, m); IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); /* NB: ieee80211_encap does not include 802.11 header */ IEEE80211_NODE_STAT_ADD(ni, tx_bytes, m->m_pkthdr.len); /* * NB: DLT_IEEE802_11_RADIO identifies the parameters are * present by setting the sa_len field of the sockaddr (yes, * this is a hack). * NB: we assume sa_data is suitably aligned to cast. */ return vap->iv_ic->ic_raw_xmit(ni, m, (const struct ieee80211_bpf_params *)(dst->sa_len ? dst->sa_data : NULL)); bad: if (m != NULL) m_freem(m); if (ni != NULL) ieee80211_free_node(ni); return error; #undef senderr } /* * Set the direction field and address fields of an outgoing * frame. Note this should be called early on in constructing * a frame as it sets i_fc[1]; other bits can then be or'd in. */ static void ieee80211_send_setup( struct ieee80211_node *ni, struct mbuf *m, int type, int tid, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN]) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) static const uint8_t zerobssid[IEEE80211_ADDR_LEN]; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); ieee80211_seq seqno; wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, bssid); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, da); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, bssid); IEEE80211_ADDR_COPY(wh->i_addr3, sa); break; case IEEE80211_M_WDS: wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, da); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); break; case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ break; case IEEE80211_M_MBSS: /* XXXRP TBD */ break; } } else { wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); if (vap->iv_opmode == IEEE80211_M_MBSS) IEEE80211_ADDR_COPY(wh->i_addr3, zerobssid); else IEEE80211_ADDR_COPY(wh->i_addr3, bssid); } *(uint16_t *)&wh->i_dur[0] = 0; seqno = ni->ni_txseqs[tid]++; *(uint16_t *)&wh->i_seq[0] = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) m->m_flags |= M_MCAST; #undef WH4 } /* + * Send an action management frame. The arguments are stuff + * into a frame without inspection; the caller is assumed to + * prepare them carefully (e.g. based on the aggregation state). + */ +int +ieee80211_send_action(struct ieee80211_node *ni, + int category, int action, uint16_t args[4]) +{ +#define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) +#define ADDSHORT(frm, v) do { \ + frm[0] = (v) & 0xff; \ + frm[1] = (v) >> 8; \ + frm += 2; \ +} while (0) +#define MS(_v, _f) (((_v) & _f) >> _f##_S) +#define SM(_v, _f) (((_v) << _f##_S) & _f) + struct ieee80211vap *vap = ni->ni_vap; + struct ieee80211com *ic = ni->ni_ic; + struct ieee80211_bpf_params params; + struct mbuf *m; + uint8_t *frm; + uint16_t baparamset; + int ret, addsize; + + KASSERT(ni != NULL, ("null node")); + + /* + * Hold a reference on the node so it doesn't go away until after + * the xmit is complete all the way in the driver. On error we + * will remove our reference. + */ + IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, + "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", + __func__, __LINE__, + ni, ether_sprintf(ni->ni_macaddr), + ieee80211_node_refcnt(ni)+1); + ieee80211_ref_node(ni); + + addsize = 0; + switch (category) { + case IEEE80211_ACTION_CAT_BA: + case IEEE80211_ACTION_CAT_HT: + addsize += sizeof(struct ieee80211_action_ba_addbaresponse); + break; + case IEEE80211_ACTION_CAT_MESHPEERING: + addsize += sizeof(uint16_t); /* capabilities */ + addsize += 2 + vap->iv_meshidlen; /* Mesh ID */ + addsize += sizeof(struct ieee80211_meshconf_ie); + /* On Open frames, the peer link ID is not sent */ + if (action == IEEE80211_ACTION_MESHPEERING_OPEN) + addsize += sizeof(struct ieee80211_meshpeer_ie) - 2; + else + addsize += sizeof(struct ieee80211_meshpeer_ie); + break; + } + m = ieee80211_getmgtframe(&frm, + ic->ic_headroom + sizeof(struct ieee80211_frame), + sizeof(uint16_t) /* action+category */ + /* XXX may action payload */ + + addsize + + ); + if (m == NULL) + senderr(ENOMEM, is_tx_nobuf); + + *frm++ = category; + *frm++ = action; + switch (category) { + case IEEE80211_ACTION_CAT_BA: + switch (action) { + case IEEE80211_ACTION_BA_ADDBA_REQUEST: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "send ADDBA request: dialogtoken %d " + "baparamset 0x%x (tid %d) batimeout 0x%x baseqctl 0x%x", + args[0], args[1], MS(args[1], IEEE80211_BAPS_TID), + args[2], args[3]); + + *frm++ = args[0]; /* dialog token */ + ADDSHORT(frm, args[1]); /* baparamset */ + ADDSHORT(frm, args[2]); /* batimeout */ + ADDSHORT(frm, args[3]); /* baseqctl */ + break; + case IEEE80211_ACTION_BA_ADDBA_RESPONSE: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "send ADDBA response: dialogtoken %d status %d " + "baparamset 0x%x (tid %d) batimeout %d", + args[0], args[1], args[2], + MS(args[2], IEEE80211_BAPS_TID), args[3]); + + *frm++ = args[0]; /* dialog token */ + ADDSHORT(frm, args[1]); /* statuscode */ + ADDSHORT(frm, args[2]); /* baparamset */ + ADDSHORT(frm, args[3]); /* batimeout */ + break; + case IEEE80211_ACTION_BA_DELBA: + /* XXX */ + baparamset = SM(args[0], IEEE80211_DELBAPS_TID) + | args[1] + ; + ADDSHORT(frm, baparamset); + ADDSHORT(frm, args[2]); /* reason code */ + + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "send DELBA action: tid %d, initiator %d reason %d", + args[0], args[1], args[2]); + break; + default: + goto badaction; + } + break; + case IEEE80211_ACTION_CAT_HT: + switch (action) { + case IEEE80211_ACTION_HT_TXCHWIDTH: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, + ni, "send HT txchwidth: width %d", + IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? 40 : 20 + ); + *frm++ = IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? + IEEE80211_A_HT_TXCHWIDTH_2040 : + IEEE80211_A_HT_TXCHWIDTH_20; + break; + default: + goto badaction; + } + break; + case IEEE80211_ACTION_CAT_MESHPEERING: + + switch (action) { + case IEEE80211_ACTION_MESHPEERING_OPEN: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni, + "send PEER OPEN action: lid %x", args[0]); + *frm++ = 0; /* capabilites */ + *frm++ = 0; + frm = ieee80211_add_meshid(frm, vap); + frm = ieee80211_add_meshconf(frm, vap); + *frm++ = IEEE80211_ELEMID_MESHPEER; + *frm++ = 3; /* len */ + *frm++ = IEEE80211_MESH_PEER_LINK_OPEN; /* subtype */ + ADDSHORT(frm, args[0]); /* local ID */ + break; + case IEEE80211_ACTION_MESHPEERING_CONFIRM: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni, + "send PEER CONFIRM action: lid %x, pid %x", + args[0], args[1]); + *frm++ = 0; /* capabilites */ + *frm++ = 0; + *frm++ = 0; /* status code */ + *frm++ = 0; + *frm++ = 0; /* AID */ + *frm++ = 0; + frm = ieee80211_add_meshid(frm, vap); + frm = ieee80211_add_meshconf(frm, vap); + *frm++ = IEEE80211_ELEMID_MESHPEER; + *frm++ = 5; /* len */ + *frm++ = IEEE80211_MESH_PEER_LINK_CONFIRM; /* subtype */ + ADDSHORT(frm, args[0]); + ADDSHORT(frm, args[1]); + break; + } + break; + default: + badaction: + IEEE80211_NOTE(vap, + IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, + "%s: unsupported category %d action %d", __func__, + category, action); + senderr(EINVAL, is_tx_unknownmgt); + /* NOTREACHED */ + } + m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); + + memset(¶ms, 0, sizeof(params)); + params.ibp_pri = WME_AC_VO; + params.ibp_rate0 = ni->ni_txparms->mgmtrate; + /* NB: we know all frames are unicast */ + params.ibp_try0 = ni->ni_txparms->maxretry; + params.ibp_power = ni->ni_txpower; + return ieee80211_mgmt_output(ni, m, IEEE80211_FC0_SUBTYPE_ACTION, + ¶ms); +bad: + ieee80211_free_node(ni); + if (m != NULL) + m_freem(m); + return ret; +#undef ADDSHORT +#undef senderr +#undef MS +#undef SM +} + + +/* * Send a management frame to the specified node. The node pointer * must have a reference as the pointer will be passed to the driver * and potentially held for a long time. If the frame is successfully * dispatched to the driver, then it is responsible for freeing the * reference (and potentially free'ing up any associated storage); * otherwise deal with reclaiming any reference (on error). */ int ieee80211_mgmt_output(struct ieee80211_node *ni, struct mbuf *m, int type, struct ieee80211_bpf_params *params) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; KASSERT(ni != NULL, ("null node")); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); vap->iv_stats.is_tx_badstate++; ieee80211_free_node(ni); m_freem(m); return EIO; /* XXX */ } M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) { ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | type, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr1, "encrypting frame (%s)", __func__); wh->i_fc[1] |= IEEE80211_FC1_WEP; } m->m_flags |= M_ENCAP; /* mark encapsulated */ KASSERT(type != IEEE80211_FC0_SUBTYPE_PROBE_RESP, ("probe response?")); M_WME_SETAC(m, params->ibp_pri); #ifdef IEEE80211_DEBUG /* avoid printing too many frames */ if ((ieee80211_msg_debug(vap) && doprint(vap, type)) || ieee80211_msg_dumppkts(vap)) { printf("[%s] send %s on channel %u\n", ether_sprintf(wh->i_addr1), ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT], ieee80211_chan2ieee(ic, ic->ic_curchan)); } #endif IEEE80211_NODE_STAT(ni, tx_mgmt); return ic->ic_raw_xmit(ni, m, params); } /* * Send a null data frame to the specified node. If the station * is setup for QoS then a QoS Null Data frame is constructed. * If this is a WDS station then a 4-address frame is constructed. * * NB: the caller is assumed to have setup a node reference * for use; this is necessary to deal with a race condition * when probing for inactive stations. Like ieee80211_mgmt_output * we must cleanup any node reference on error; however we * can safely just unref it as we know it will never be the * last reference to the node. */ int ieee80211_send_nulldata(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct mbuf *m; struct ieee80211_frame *wh; int hdrlen; uint8_t *frm; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", "null data"); ieee80211_unref_node(&ni); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } if (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) hdrlen = sizeof(struct ieee80211_qosframe); else hdrlen = sizeof(struct ieee80211_frame); /* NB: only WDS vap's get 4-address frames */ if (vap->iv_opmode == IEEE80211_M_WDS) hdrlen += IEEE80211_ADDR_LEN; if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrlen = roundup(hdrlen, sizeof(uint32_t)); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + hdrlen, 0); if (m == NULL) { /* XXX debug msg */ ieee80211_unref_node(&ni); vap->iv_stats.is_tx_nobuf++; return ENOMEM; } KASSERT(M_LEADINGSPACE(m) >= hdrlen, ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, hdrlen, M_DONTWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); /* NB: a little lie */ if (ni->ni_flags & IEEE80211_NODE_QOS) { const int tid = WME_AC_TO_TID(WME_AC_BE); uint8_t *qos; ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS_NULL, tid, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (vap->iv_opmode == IEEE80211_M_WDS) qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; else qos = ((struct ieee80211_qosframe *) wh)->i_qos; qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[WME_AC_BE].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; qos[1] = 0; } else { ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); } if (vap->iv_opmode != IEEE80211_M_WDS) { /* NB: power management bit is never sent by an AP */ if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && vap->iv_opmode != IEEE80211_M_HOSTAP) wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; } m->m_len = m->m_pkthdr.len = hdrlen; m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_data); IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, ni, "send %snull data frame on channel %u, pwr mgt %s", ni->ni_flags & IEEE80211_NODE_QOS ? "QoS " : "", ieee80211_chan2ieee(ic, ic->ic_curchan), wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); return ic->ic_raw_xmit(ni, m, NULL); } /* * Assign priority to a frame based on any vlan tag assigned * to the station and/or any Diffserv setting in an IP header. * Finally, if an ACM policy is setup (in station mode) it's * applied. */ int ieee80211_classify(struct ieee80211_node *ni, struct mbuf *m) { const struct ether_header *eh = mtod(m, struct ether_header *); int v_wme_ac, d_wme_ac, ac; /* * Always promote PAE/EAPOL frames to high priority. */ if (eh->ether_type == htons(ETHERTYPE_PAE)) { /* NB: mark so others don't need to check header */ m->m_flags |= M_EAPOL; ac = WME_AC_VO; goto done; } /* * Non-qos traffic goes to BE. */ if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { ac = WME_AC_BE; goto done; } /* * If node has a vlan tag then all traffic * to it must have a matching tag. */ v_wme_ac = 0; if (ni->ni_vlan != 0) { if ((m->m_flags & M_VLANTAG) == 0) { IEEE80211_NODE_STAT(ni, tx_novlantag); return 1; } if (EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != EVL_VLANOFTAG(ni->ni_vlan)) { IEEE80211_NODE_STAT(ni, tx_vlanmismatch); return 1; } /* map vlan priority to AC */ v_wme_ac = TID_TO_WME_AC(EVL_PRIOFTAG(ni->ni_vlan)); } #ifdef INET if (eh->ether_type == htons(ETHERTYPE_IP)) { uint8_t tos; /* * IP frame, map the DSCP bits from the TOS field. */ /* XXX m_copydata may be too slow for fast path */ /* NB: ip header may not be in first mbuf */ m_copydata(m, sizeof(struct ether_header) + offsetof(struct ip, ip_tos), sizeof(tos), &tos); tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ d_wme_ac = TID_TO_WME_AC(tos); } else { #endif /* INET */ d_wme_ac = WME_AC_BE; #ifdef INET } #endif /* * Use highest priority AC. */ if (v_wme_ac > d_wme_ac) ac = v_wme_ac; else ac = d_wme_ac; /* * Apply ACM policy. */ if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) { static const int acmap[4] = { WME_AC_BK, /* WME_AC_BE */ WME_AC_BK, /* WME_AC_BK */ WME_AC_BE, /* WME_AC_VI */ WME_AC_VI, /* WME_AC_VO */ }; struct ieee80211com *ic = ni->ni_ic; while (ac != WME_AC_BK && ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) ac = acmap[ac]; } done: M_WME_SETAC(m, ac); return 0; } /* * Insure there is sufficient contiguous space to encapsulate the * 802.11 data frame. If room isn't already there, arrange for it. * Drivers and cipher modules assume we have done the necessary work * and fail rudely if they don't find the space they need. */ struct mbuf * ieee80211_mbuf_adjust(struct ieee80211vap *vap, int hdrsize, struct ieee80211_key *key, struct mbuf *m) { #define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) int needed_space = vap->iv_ic->ic_headroom + hdrsize; if (key != NULL) { /* XXX belongs in crypto code? */ needed_space += key->wk_cipher->ic_header; /* XXX frags */ /* * When crypto is being done in the host we must insure * the data are writable for the cipher routines; clone * a writable mbuf chain. * XXX handle SWMIC specially */ if (key->wk_flags & (IEEE80211_KEY_SWENCRYPT|IEEE80211_KEY_SWENMIC)) { m = m_unshare(m, M_NOWAIT); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot get writable mbuf\n", __func__); vap->iv_stats.is_tx_nobuf++; /* XXX new stat */ return NULL; } } } /* * We know we are called just before stripping an Ethernet * header and prepending an LLC header. This means we know * there will be * sizeof(struct ether_header) - sizeof(struct llc) * bytes recovered to which we need additional space for the * 802.11 header and any crypto header. */ /* XXX check trailing space and copy instead? */ if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); if (n == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot expand storage\n", __func__); vap->iv_stats.is_tx_nobuf++; m_freem(m); return NULL; } KASSERT(needed_space <= MHLEN, ("not enough room, need %u got %zu\n", needed_space, MHLEN)); /* * Setup new mbuf to have leading space to prepend the * 802.11 header and any crypto header bits that are * required (the latter are added when the driver calls * back to ieee80211_crypto_encap to do crypto encapsulation). */ /* NB: must be first 'cuz it clobbers m_data */ m_move_pkthdr(n, m); n->m_len = 0; /* NB: m_gethdr does not set */ n->m_data += needed_space; /* * Pull up Ethernet header to create the expected layout. * We could use m_pullup but that's overkill (i.e. we don't * need the actual data) and it cannot fail so do it inline * for speed. */ /* NB: struct ether_header is known to be contiguous */ n->m_len += sizeof(struct ether_header); m->m_len -= sizeof(struct ether_header); m->m_data += sizeof(struct ether_header); /* * Replace the head of the chain. */ n->m_next = m; m = n; } return m; #undef TO_BE_RECLAIMED } /* * Return the transmit key to use in sending a unicast frame. * If a unicast key is set we use that. When no unicast key is set * we fall back to the default transmit key. */ static __inline struct ieee80211_key * ieee80211_crypto_getucastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } else { return &ni->ni_ucastkey; } } /* * Return the transmit key to use in sending a multicast frame. * Multicast traffic always uses the group key which is installed as * the default tx key. */ static __inline struct ieee80211_key * ieee80211_crypto_getmcastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } /* * Encapsulate an outbound data frame. The mbuf chain is updated. * If an error is encountered NULL is returned. The caller is required * to provide a node reference and pullup the ethernet header in the * first mbuf. * * NB: Packet is assumed to be processed by ieee80211_classify which * marked EAPOL frames w/ M_EAPOL. */ struct mbuf * ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)(wh)) struct ieee80211com *ic = ni->ni_ic; struct ether_header eh; struct ieee80211_frame *wh; struct ieee80211_key *key; struct llc *llc; int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr; ieee80211_seq seqno; /* * Copy existing Ethernet header to a safe place. The * rest of the code assumes it's ok to strip it when * reorganizing state for the final encapsulation. */ KASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); ETHER_HEADER_COPY(&eh, mtod(m, caddr_t)); /* * Insure space for additional headers. First identify * transmit key to use in calculating any buffer adjustments * required. This is also used below to do privacy * encapsulation work. Then calculate the 802.11 header * size and any padding required by the driver. * * Note key may be NULL if we fall back to the default * transmit key and that is not set. In that case the * buffer may not be expanded as needed by the cipher * routines, but they will/should discard it. */ if (vap->iv_flags & IEEE80211_F_PRIVACY) { if (vap->iv_opmode == IEEE80211_M_STA || !IEEE80211_IS_MULTICAST(eh.ether_dhost) || (vap->iv_opmode == IEEE80211_M_WDS && (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) key = ieee80211_crypto_getucastkey(vap, ni); else key = ieee80211_crypto_getmcastkey(vap, ni); if (key == NULL && (m->m_flags & M_EAPOL) == 0) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, eh.ether_dhost, "no default transmit key (%s) deftxkey %u", __func__, vap->iv_def_txkey); vap->iv_stats.is_tx_nodefkey++; goto bad; } } else key = NULL; /* * XXX Some ap's don't handle QoS-encapsulated EAPOL * frames so suppress use. This may be an issue if other * ap's require all data frames to be QoS-encapsulated * once negotiated in which case we'll need to make this * configurable. */ addqos = (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) && (m->m_flags & M_EAPOL) == 0; if (addqos) hdrsize = sizeof(struct ieee80211_qosframe); else hdrsize = sizeof(struct ieee80211_frame); /* * 4-address frames need to be generated for: * o packets sent through a WDS vap (IEEE80211_M_WDS) * o packets sent through a vap marked for relaying * (e.g. a station operating with dynamic WDS) */ is4addr = vap->iv_opmode == IEEE80211_M_WDS || ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) && !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)); if (is4addr) hdrsize += IEEE80211_ADDR_LEN; /* * Honor driver DATAPAD requirement. */ if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrspace = roundup(hdrsize, sizeof(uint32_t)); else hdrspace = hdrsize; if (__predict_true((m->m_flags & M_FF) == 0)) { /* * Normal frame. */ m = ieee80211_mbuf_adjust(vap, hdrspace, key, m); if (m == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ goto bad; } /* NB: this could be optimized 'cuz of ieee80211_mbuf_adjust */ m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); llc = mtod(m, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh.ether_type; } else { #ifdef IEEE80211_SUPPORT_SUPERG /* * Aggregated frame. */ m = ieee80211_ff_encap(vap, m, hdrspace, key); if (m == NULL) #endif goto bad; } datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ M_PREPEND(m, hdrspace, M_DONTWAIT); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; goto bad; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(uint16_t *)wh->i_dur = 0; if (is4addr) { wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); } else switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); /* * NB: always use the bssid from iv_bss as the * neighbor's may be stale after an ibss merge */ IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_bss->ni_bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); break; case IEEE80211_M_MONITOR: case IEEE80211_M_WDS: /* NB: is4addr should always be true */ case IEEE80211_M_MBSS: goto bad; } if (m->m_flags & M_MORE_DATA) wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; if (addqos) { uint8_t *qos; int ac, tid; if (is4addr) { qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; } else qos = ((struct ieee80211_qosframe *) wh)->i_qos; ac = M_WME_GETAC(m); /* map from access class/queue to 11e header priorty value */ tid = WME_AC_TO_TID(ac); qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; qos[1] = 0; wh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; if ((m->m_flags & M_AMPDU_MPDU) == 0) { /* * NB: don't assign a sequence # to potential * aggregates; we expect this happens at the * point the frame comes off any aggregation q * as otherwise we may introduce holes in the * BA sequence space and/or make window accouting * more difficult. * * XXX may want to control this with a driver * capability; this may also change when we pull * aggregation up into net80211 */ seqno = ni->ni_txseqs[tid]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); } } else { seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); } /* check if xmit fragmentation is required */ txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold && !IEEE80211_IS_MULTICAST(wh->i_addr1) && (vap->iv_caps & IEEE80211_C_TXFRAG) && (m->m_flags & (M_FF | M_AMPDU_MPDU)) == 0); if (key != NULL) { /* * IEEE 802.1X: send EAPOL frames always in the clear. * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. */ if ((m->m_flags & M_EAPOL) == 0 || ((vap->iv_flags & IEEE80211_F_WPA) && (vap->iv_opmode == IEEE80211_M_STA ? !IEEE80211_KEY_UNDEFINED(key) : !IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)))) { wh->i_fc[1] |= IEEE80211_FC1_WEP; if (!ieee80211_crypto_enmic(vap, key, m, txfrag)) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, eh.ether_dhost, "%s", "enmic failed, discard frame"); vap->iv_stats.is_crypto_enmicfail++; goto bad; } } } if (txfrag && !ieee80211_fragment(vap, m, hdrsize, key != NULL ? key->wk_cipher->ic_header : 0, vap->iv_fragthreshold)) goto bad; m->m_flags |= M_ENCAP; /* mark encapsulated */ IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); return m; bad: if (m != NULL) m_freem(m); return NULL; #undef WH4 } /* * Fragment the frame according to the specified mtu. * The size of the 802.11 header (w/o padding) is provided * so we don't need to recalculate it. We create a new * mbuf for each fragment and chain it through m_nextpkt; * we might be able to optimize this by reusing the original * packet's mbufs but that is significantly more complicated. */ static int ieee80211_fragment(struct ieee80211vap *vap, struct mbuf *m0, u_int hdrsize, u_int ciphdrsize, u_int mtu) { struct ieee80211_frame *wh, *whf; struct mbuf *m, *prev, *next; u_int totalhdrsize, fragno, fragsize, off, remainder, payload; KASSERT(m0->m_nextpkt == NULL, ("mbuf already chained?")); KASSERT(m0->m_pkthdr.len > mtu, ("pktlen %u mtu %u", m0->m_pkthdr.len, mtu)); wh = mtod(m0, struct ieee80211_frame *); /* NB: mark the first frag; it will be propagated below */ wh->i_fc[1] |= IEEE80211_FC1_MORE_FRAG; totalhdrsize = hdrsize + ciphdrsize; fragno = 1; off = mtu - ciphdrsize; remainder = m0->m_pkthdr.len - off; prev = m0; do { fragsize = totalhdrsize + remainder; if (fragsize > mtu) fragsize = mtu; /* XXX fragsize can be >2048! */ KASSERT(fragsize < MCLBYTES, ("fragment size %u too big!", fragsize)); if (fragsize > MHLEN) m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); else m = m_gethdr(M_DONTWAIT, MT_DATA); if (m == NULL) goto bad; /* leave room to prepend any cipher header */ m_align(m, fragsize - ciphdrsize); /* * Form the header in the fragment. Note that since * we mark the first fragment with the MORE_FRAG bit * it automatically is propagated to each fragment; we * need only clear it on the last fragment (done below). */ whf = mtod(m, struct ieee80211_frame *); memcpy(whf, wh, hdrsize); *(uint16_t *)&whf->i_seq[0] |= htole16( (fragno & IEEE80211_SEQ_FRAG_MASK) << IEEE80211_SEQ_FRAG_SHIFT); fragno++; payload = fragsize - totalhdrsize; /* NB: destination is known to be contiguous */ m_copydata(m0, off, payload, mtod(m, uint8_t *) + hdrsize); m->m_len = hdrsize + payload; m->m_pkthdr.len = hdrsize + payload; m->m_flags |= M_FRAG; /* chain up the fragment */ prev->m_nextpkt = m; prev = m; /* deduct fragment just formed */ remainder -= payload; off += payload; } while (remainder != 0); /* set the last fragment */ m->m_flags |= M_LASTFRAG; whf->i_fc[1] &= ~IEEE80211_FC1_MORE_FRAG; /* strip first mbuf now that everything has been copied */ m_adj(m0, -(m0->m_pkthdr.len - (mtu - ciphdrsize))); m0->m_flags |= M_FIRSTFRAG | M_FRAG; vap->iv_stats.is_tx_fragframes++; vap->iv_stats.is_tx_frags += fragno-1; return 1; bad: /* reclaim fragments but leave original frame for caller to free */ for (m = m0->m_nextpkt; m != NULL; m = next) { next = m->m_nextpkt; m->m_nextpkt = NULL; /* XXX paranoid */ m_freem(m); } m0->m_nextpkt = NULL; return 0; } /* * Add a supported rates element id to a frame. */ static uint8_t * ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs) { int nrates; *frm++ = IEEE80211_ELEMID_RATES; nrates = rs->rs_nrates; if (nrates > IEEE80211_RATE_SIZE) nrates = IEEE80211_RATE_SIZE; *frm++ = nrates; memcpy(frm, rs->rs_rates, nrates); return frm + nrates; } /* * Add an extended supported rates element id to a frame. */ static uint8_t * ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs) { /* * Add an extended supported rates element if operating in 11g mode. */ if (rs->rs_nrates > IEEE80211_RATE_SIZE) { int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; *frm++ = IEEE80211_ELEMID_XRATES; *frm++ = nrates; memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); frm += nrates; } return frm; } /* * Add an ssid element to a frame. */ static uint8_t * ieee80211_add_ssid(uint8_t *frm, const uint8_t *ssid, u_int len) { *frm++ = IEEE80211_ELEMID_SSID; *frm++ = len; memcpy(frm, ssid, len); return frm + len; } /* * Add an erp element to a frame. */ static uint8_t * ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic) { uint8_t erp; *frm++ = IEEE80211_ELEMID_ERP; *frm++ = 1; erp = 0; if (ic->ic_nonerpsta != 0) erp |= IEEE80211_ERP_NON_ERP_PRESENT; if (ic->ic_flags & IEEE80211_F_USEPROT) erp |= IEEE80211_ERP_USE_PROTECTION; if (ic->ic_flags & IEEE80211_F_USEBARKER) erp |= IEEE80211_ERP_LONG_PREAMBLE; *frm++ = erp; return frm; } /* * Add a CFParams element to a frame. */ static uint8_t * ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic) { #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) *frm++ = IEEE80211_ELEMID_CFPARMS; *frm++ = 6; *frm++ = 0; /* CFP count */ *frm++ = 2; /* CFP period */ ADDSHORT(frm, 0); /* CFP MaxDuration (TU) */ ADDSHORT(frm, 0); /* CFP CurRemaining (TU) */ return frm; #undef ADDSHORT } static __inline uint8_t * add_appie(uint8_t *frm, const struct ieee80211_appie *ie) { memcpy(frm, ie->ie_data, ie->ie_len); return frm + ie->ie_len; } static __inline uint8_t * add_ie(uint8_t *frm, const uint8_t *ie) { memcpy(frm, ie, 2 + ie[1]); return frm + 2 + ie[1]; } #define WME_OUI_BYTES 0x00, 0x50, 0xf2 /* * Add a WME information element to a frame. */ static uint8_t * ieee80211_add_wme_info(uint8_t *frm, struct ieee80211_wme_state *wme) { static const struct ieee80211_wme_info info = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_info) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_INFO_OUI_SUBTYPE, .wme_version = WME_VERSION, .wme_info = 0, }; memcpy(frm, &info, sizeof(info)); return frm + sizeof(info); } /* * Add a WME parameters element to a frame. */ static uint8_t * ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme) { #define SM(_v, _f) (((_v) << _f##_S) & _f) #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) /* NB: this works 'cuz a param has an info at the front */ static const struct ieee80211_wme_info param = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_param) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_PARAM_OUI_SUBTYPE, .wme_version = WME_VERSION, }; int i; memcpy(frm, ¶m, sizeof(param)); frm += __offsetof(struct ieee80211_wme_info, wme_info); *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ *frm++ = 0; /* reserved field */ for (i = 0; i < WME_NUM_AC; i++) { const struct wmeParams *ac = &wme->wme_bssChanParams.cap_wmeParams[i]; *frm++ = SM(i, WME_PARAM_ACI) | SM(ac->wmep_acm, WME_PARAM_ACM) | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) ; *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) ; ADDSHORT(frm, ac->wmep_txopLimit); } return frm; #undef SM #undef ADDSHORT } #undef WME_OUI_BYTES /* * Add an 11h Power Constraint element to a frame. */ static uint8_t * ieee80211_add_powerconstraint(uint8_t *frm, struct ieee80211vap *vap) { const struct ieee80211_channel *c = vap->iv_bss->ni_chan; /* XXX per-vap tx power limit? */ int8_t limit = vap->iv_ic->ic_txpowlimit / 2; frm[0] = IEEE80211_ELEMID_PWRCNSTR; frm[1] = 1; frm[2] = c->ic_maxregpower > limit ? c->ic_maxregpower - limit : 0; return frm + 3; } /* * Add an 11h Power Capability element to a frame. */ static uint8_t * ieee80211_add_powercapability(uint8_t *frm, const struct ieee80211_channel *c) { frm[0] = IEEE80211_ELEMID_PWRCAP; frm[1] = 2; frm[2] = c->ic_minpower; frm[3] = c->ic_maxpower; return frm + 4; } /* * Add an 11h Supported Channels element to a frame. */ static uint8_t * ieee80211_add_supportedchannels(uint8_t *frm, struct ieee80211com *ic) { static const int ielen = 26; frm[0] = IEEE80211_ELEMID_SUPPCHAN; frm[1] = ielen; /* XXX not correct */ memcpy(frm+2, ic->ic_chan_avail, ielen); return frm + 2 + ielen; } /* * Add an 11h Channel Switch Announcement element to a frame. * Note that we use the per-vap CSA count to adjust the global * counter so we can use this routine to form probe response * frames and get the current count. */ static uint8_t * ieee80211_add_csa(uint8_t *frm, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) frm; csa->csa_ie = IEEE80211_ELEMID_CHANSWITCHANN; csa->csa_len = 3; csa->csa_mode = 1; /* XXX force quiet on channel */ csa->csa_newchan = ieee80211_chan2ieee(ic, ic->ic_csa_newchan); csa->csa_count = ic->ic_csa_count - vap->iv_csa_count; return frm + sizeof(*csa); } /* * Add an 11h country information element to a frame. */ static uint8_t * ieee80211_add_countryie(uint8_t *frm, struct ieee80211com *ic) { if (ic->ic_countryie == NULL || ic->ic_countryie_chan != ic->ic_bsschan) { /* * Handle lazy construction of ie. This is done on * first use and after a channel change that requires * re-calculation. */ if (ic->ic_countryie != NULL) free(ic->ic_countryie, M_80211_NODE_IE); ic->ic_countryie = ieee80211_alloc_countryie(ic); if (ic->ic_countryie == NULL) return frm; ic->ic_countryie_chan = ic->ic_bsschan; } return add_appie(frm, ic->ic_countryie); } /* * Send a probe request frame with the specified ssid * and any optional information element data. */ int ieee80211_send_probereq(struct ieee80211_node *ni, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t *ssid, size_t ssidlen) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; const struct ieee80211_txparam *tp; struct ieee80211_bpf_params params; struct ieee80211_frame *wh; const struct ieee80211_rateset *rs; struct mbuf *m; uint8_t *frm; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni, "block %s frame in CAC state", "probe request"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] RSN (optional) * [tlv] extended supported rates * [tlv] WPA (optional) * [tlv] user-specified ie's */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + sizeof(struct ieee80211_ie_wpa) + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + (vap->iv_appie_probereq != NULL ? vap->iv_appie_probereq->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } frm = ieee80211_add_ssid(frm, ssid, ssidlen); rs = ieee80211_get_suprates(ic, ic->ic_curchan); frm = ieee80211_add_rates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain? */ } if (vap->iv_appie_probereq != NULL) frm = add_appie(frm, vap->iv_appie_probereq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); KASSERT(M_LEADINGSPACE(m) >= sizeof(struct ieee80211_frame), ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, IEEE80211_NONQOS_TID, sa, da, bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_probereq); IEEE80211_NODE_STAT(ni, tx_mgmt); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe req on channel %u bssid %s ssid \"%.*s\"\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(bssid), ssidlen, ssid); memset(¶ms, 0, sizeof(params)); params.ibp_pri = M_WME_GETAC(m); tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; params.ibp_rate0 = tp->mgmtrate; if (IEEE80211_IS_MULTICAST(da)) { params.ibp_flags |= IEEE80211_BPF_NOACK; params.ibp_try0 = 1; } else params.ibp_try0 = tp->maxretry; params.ibp_power = ni->ni_txpower; return ic->ic_raw_xmit(ni, m, ¶ms); } /* * Calculate capability information for mgt frames. */ static uint16_t getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; uint16_t capinfo; KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("station mode")); if (vap->iv_opmode == IEEE80211_M_HOSTAP) capinfo = IEEE80211_CAPINFO_ESS; else if (vap->iv_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = 0; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if (IEEE80211_IS_CHAN_5GHZ(chan) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; return capinfo; } /* * Send a management frame. The node is for the destination (or ic_bss * when in station mode). Nodes other than ic_bss have their reference * count bumped to reflect our use for an indeterminant time. */ int ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg) { #define HTFLAGS (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT) #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node *bss = vap->iv_bss; struct ieee80211_bpf_params params; struct mbuf *m; uint8_t *frm; uint16_t capinfo; int has_challenge, is_shared_key, ret, status; KASSERT(ni != NULL, ("null node")); /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); memset(¶ms, 0, sizeof(params)); switch (type) { case IEEE80211_FC0_SUBTYPE_AUTH: status = arg >> 16; arg &= 0xffff; has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || arg == IEEE80211_AUTH_SHARED_RESPONSE) && ni->ni_challenge != NULL); /* * Deduce whether we're doing open authentication or * shared key authentication. We do the latter if * we're in the middle of a shared key authentication * handshake or if we're initiating an authentication * request and configured to use shared key. */ is_shared_key = has_challenge || arg >= IEEE80211_AUTH_SHARED_RESPONSE || (arg == IEEE80211_AUTH_SHARED_REQUEST && bss->ni_authmode == IEEE80211_AUTH_SHARED); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 3 * sizeof(uint16_t) + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? sizeof(uint16_t)+IEEE80211_CHALLENGE_LEN : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); ((uint16_t *)frm)[0] = (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) : htole16(IEEE80211_AUTH_ALG_OPEN); ((uint16_t *)frm)[1] = htole16(arg); /* sequence number */ ((uint16_t *)frm)[2] = htole16(status);/* status */ if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { ((uint16_t *)frm)[3] = htole16((IEEE80211_CHALLENGE_LEN << 8) | IEEE80211_ELEMID_CHALLENGE); memcpy(&((uint16_t *)frm)[4], ni->ni_challenge, IEEE80211_CHALLENGE_LEN); m->m_pkthdr.len = m->m_len = 4 * sizeof(uint16_t) + IEEE80211_CHALLENGE_LEN; if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "request encrypt frame (%s)", __func__); /* mark frame for encryption */ params.ibp_flags |= IEEE80211_BPF_CRYPTO; } } else m->m_pkthdr.len = m->m_len = 3 * sizeof(uint16_t); /* XXX not right for shared key */ if (status == IEEE80211_STATUS_SUCCESS) IEEE80211_NODE_STAT(ni, tx_auth); else IEEE80211_NODE_STAT(ni, tx_auth_fail); if (vap->iv_opmode == IEEE80211_M_STA) ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "send station deauthenticate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_deauth); IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); ieee80211_node_unauthorize(ni); /* port closed */ break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: /* * asreq frame format * [2] capability information * [2] listen interval * [6*] current AP address (reassoc only) * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [4] power capability (optional) * [28] supported channels (optional) * [tlv] HT capabilities * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Atheros capabilities (if negotiated) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + IEEE80211_ADDR_LEN + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + 4 + 2 + 26 + sizeof(struct ieee80211_wme_info) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htcap) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_wpa != NULL ? vap->iv_appie_wpa->ie_len : 0) + (vap->iv_appie_assocreq != NULL ? vap->iv_appie_assocreq->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode %u", vap->iv_opmode)); capinfo = IEEE80211_CAPINFO_ESS; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; /* * NB: Some 11a AP's reject the request when * short premable is set. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && (ic->ic_caps & IEEE80211_C_SHSLOT)) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if ((ni->ni_capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; *(uint16_t *)frm = htole16(capinfo); frm += 2; KASSERT(bss->ni_intval != 0, ("beacon interval is zero!")); *(uint16_t *)frm = htole16(howmany(ic->ic_lintval, bss->ni_intval)); frm += 2; if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { IEEE80211_ADDR_COPY(frm, bss->ni_bssid); frm += IEEE80211_ADDR_LEN; } frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, &ni->ni_rates); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } frm = ieee80211_add_xrates(frm, &ni->ni_rates); if (capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) { frm = ieee80211_add_powercapability(frm, ic->ic_curchan); frm = ieee80211_add_supportedchannels(frm, ic); } if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_HTCAP) frm = ieee80211_add_htcap(frm, ni); if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain */ } if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_info(frm, &ic->ic_wme); if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_VENDOR) frm = ieee80211_add_htcap_vendor(frm, ni); #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) { frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); } #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocreq != NULL) frm = add_appie(frm, vap->iv_appie_assocreq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] HT capabilities (standard, if STA enabled) * [tlv] HT information (standard, if STA enabled) * [tlv] WME (if configured and STA enabled) * [tlv] HT capabilities (vendor OUI, if STA enabled) * [tlv] HT information (vendor OUI, if STA enabled) * [tlv] Atheros capabilities (if STA enabled) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) + 4 + sizeof(struct ieee80211_wme_param) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_assocresp != NULL ? vap->iv_appie_assocresp->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); capinfo = getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; *(uint16_t *)frm = htole16(arg); /* status */ frm += 2; if (arg == IEEE80211_STATUS_SUCCESS) { *(uint16_t *)frm = htole16(ni->ni_associd); IEEE80211_NODE_STAT(ni, tx_assoc); } else IEEE80211_NODE_STAT(ni, tx_assoc_fail); frm += 2; frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_xrates(frm, &ni->ni_rates); /* NB: respond according to what we received */ if ((ni->ni_flags & HTFLAGS) == IEEE80211_NODE_HT) { frm = ieee80211_add_htcap(frm, ni); frm = ieee80211_add_htinfo(frm, ni); } if ((vap->iv_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if ((ni->ni_flags & HTFLAGS) == HTFLAGS) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocresp != NULL) frm = add_appie(frm, vap->iv_appie_assocresp); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); break; case IEEE80211_FC0_SUBTYPE_DISASSOC: IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "send station disassociate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_disassoc); IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); break; default: IEEE80211_NOTE(vap, IEEE80211_MSG_ANY, ni, "invalid mgmt frame type %u", type); senderr(EINVAL, is_tx_unknownmgt); /* NOTREACHED */ } /* NB: force non-ProbeResp frames to the highest queue */ params.ibp_pri = WME_AC_VO; params.ibp_rate0 = bss->ni_txparms->mgmtrate; /* NB: we know all frames are unicast */ params.ibp_try0 = bss->ni_txparms->maxretry; params.ibp_power = bss->ni_txpower; return ieee80211_mgmt_output(ni, m, type, ¶ms); bad: ieee80211_free_node(ni); return ret; #undef senderr #undef HTFLAGS } /* * Return an mbuf with a probe response frame in it. * Space is left to prepend and 802.11 header at the * front but it's left to the caller to fill in. */ struct mbuf * ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy) { struct ieee80211vap *vap = bss->ni_vap; struct ieee80211com *ic = bss->ni_ic; const struct ieee80211_rateset *rs; struct mbuf *m; uint16_t capinfo; uint8_t *frm; /* * probe response frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [tlv] parameter set (FH/DS) * [tlv] parameter set (IBSS) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN (optional) * [tlv] HT capabilities * [tlv] HT information * [tlv] WPA (optional) * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities * [tlv] AppIE's (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 8 + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 7 /* max(7,3) */ + IEEE80211_COUNTRY_MAX_SIZE + 3 + sizeof(struct ieee80211_csa_ie) + 3 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_ie_htcap) + sizeof(struct ieee80211_ie_htinfo) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_wme_param) + 4 + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + 2 + IEEE80211_MESHID_LEN + sizeof(struct ieee80211_meshconf_ie) + (vap->iv_appie_proberesp != NULL ? vap->iv_appie_proberesp->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; return NULL; } memset(frm, 0, 8); /* timestamp should be filled later */ frm += 8; *(uint16_t *)frm = htole16(bss->ni_intval); frm += 2; capinfo = getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; frm = ieee80211_add_ssid(frm, bss->ni_essid, bss->ni_esslen); rs = ieee80211_get_suprates(ic, bss->ni_chan); frm = ieee80211_add_rates(frm, rs); if (IEEE80211_IS_CHAN_FHSS(bss->ni_chan)) { *frm++ = IEEE80211_ELEMID_FHPARMS; *frm++ = 5; *frm++ = bss->ni_fhdwell & 0x00ff; *frm++ = (bss->ni_fhdwell >> 8) & 0x00ff; *frm++ = IEEE80211_FH_CHANSET( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = IEEE80211_FH_CHANPAT( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = bss->ni_fhindex; } else { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, bss->ni_chan); } if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ } if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(bss->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } if (IEEE80211_IS_CHAN_ANYG(bss->ni_chan)) frm = ieee80211_add_erp(frm, ic); frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } /* * NB: legacy 11b clients do not get certain ie's. * The caller identifies such clients by passing * a token in legacy to us. Could expand this to be * any legacy client for stuff like HT ie's. */ if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap(frm, bss); frm = ieee80211_add_htinfo(frm, bss); } if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain? */ } if (vap->iv_flags & IEEE80211_F_WME) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap_vendor(frm, bss); frm = ieee80211_add_htinfo_vendor(frm, bss); } #ifdef IEEE80211_SUPPORT_SUPERG if ((vap->iv_flags & IEEE80211_F_ATHEROS) && legacy != IEEE80211_SEND_LEGACY_11B) frm = ieee80211_add_athcaps(frm, bss); #endif if (vap->iv_appie_proberesp != NULL) frm = add_appie(frm, vap->iv_appie_proberesp); if (vap->iv_opmode == IEEE80211_M_MBSS) { frm = ieee80211_add_meshid(frm, vap); frm = ieee80211_add_meshconf(frm, vap); } m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return m; } /* * Send a probe response frame to the specified mac address. * This does not go through the normal mgt frame api so we * can specify the destination address and re-use the bss node * for the sta reference. */ int ieee80211_send_proberesp(struct ieee80211vap *vap, const uint8_t da[IEEE80211_ADDR_LEN], int legacy) { struct ieee80211_node *bss = vap->iv_bss; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_frame *wh; struct mbuf *m; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, bss, "block %s frame in CAC state", "probe response"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, bss, ether_sprintf(bss->ni_macaddr), ieee80211_node_refcnt(bss)+1); ieee80211_ref_node(bss); m = ieee80211_alloc_proberesp(bss, legacy); if (m == NULL) { ieee80211_free_node(bss); return ENOMEM; } M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); KASSERT(m != NULL, ("no room for header")); wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(bss, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP, IEEE80211_NONQOS_TID, vap->iv_myaddr, da, bss->ni_bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe resp on channel %u to %s%s\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(da), legacy ? " " : ""); IEEE80211_NODE_STAT(bss, tx_mgmt); return ic->ic_raw_xmit(bss, m, NULL); } /* * Allocate and build a RTS (Request To Send) control frame. */ struct mbuf * ieee80211_alloc_rts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], const uint8_t ta[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_rts *rts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_DONTWAIT, MT_DATA); if (m != NULL) { rts = mtod(m, struct ieee80211_frame_rts *); rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)rts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(rts->i_ra, ra); IEEE80211_ADDR_COPY(rts->i_ta, ta); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); } return m; } /* * Allocate and build a CTS (Clear To Send) control frame. */ struct mbuf * ieee80211_alloc_cts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_cts *cts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_DONTWAIT, MT_DATA); if (m != NULL) { cts = mtod(m, struct ieee80211_frame_cts *); cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)cts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(cts->i_ra, ra); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); } return m; } static void ieee80211_tx_mgt_timeout(void *arg) { struct ieee80211_node *ni = arg; struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_state != IEEE80211_S_INIT && (vap->iv_ic->ic_flags & IEEE80211_F_SCAN) == 0) { /* * NB: it's safe to specify a timeout as the reason here; * it'll only be used in the right state. */ ieee80211_new_state(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_TIMEOUT); } } static void ieee80211_tx_mgt_cb(struct ieee80211_node *ni, void *arg, int status) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_state ostate = (enum ieee80211_state) arg; /* * Frame transmit completed; arrange timer callback. If * transmit was successfuly we wait for response. Otherwise * we arrange an immediate callback instead of doing the * callback directly since we don't know what state the driver * is in (e.g. what locks it is holding). This work should * not be too time-critical and not happen too often so the * added overhead is acceptable. * * XXX what happens if !acked but response shows up before callback? */ if (vap->iv_state == ostate) callout_reset(&vap->iv_mgtsend, status == 0 ? IEEE80211_TRANS_WAIT*hz : 0, ieee80211_tx_mgt_timeout, ni); } static void ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm, struct ieee80211_beacon_offsets *bo, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_rateset *rs = &ni->ni_rates; uint16_t capinfo; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities (optional) * [tlv] TDMA parameters (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) * [tlv] application data (optional) */ memset(bo, 0, sizeof(*bo)); memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ frm += 8; *(uint16_t *)frm = htole16(ni->ni_intval); frm += 2; capinfo = getcapinfo(vap, ni->ni_chan); bo->bo_caps = (uint16_t *)frm; *(uint16_t *)frm = htole16(capinfo); frm += 2; *frm++ = IEEE80211_ELEMID_SSID; if ((vap->iv_flags & IEEE80211_F_HIDESSID) == 0) { *frm++ = ni->ni_esslen; memcpy(frm, ni->ni_essid, ni->ni_esslen); frm += ni->ni_esslen; } else *frm++ = 0; frm = ieee80211_add_rates(frm, rs); if (!IEEE80211_IS_CHAN_FHSS(ni->ni_chan)) { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); } if (ic->ic_flags & IEEE80211_F_PCF) { bo->bo_cfp = frm; frm = ieee80211_add_cfparms(frm, ic); } bo->bo_tim = frm; if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ bo->bo_tim_len = 0; } else if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) { /* TIM IE is the same for Mesh and Hostap */ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; tie->tim_ie = IEEE80211_ELEMID_TIM; tie->tim_len = 4; /* length */ tie->tim_count = 0; /* DTIM count */ tie->tim_period = vap->iv_dtim_period; /* DTIM period */ tie->tim_bitctl = 0; /* bitmap control */ tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ frm += sizeof(struct ieee80211_tim_ie); bo->bo_tim_len = 1; } bo->bo_tim_trailer = frm; if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); bo->bo_csa = frm; if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } else bo->bo_csa = frm; if (IEEE80211_IS_CHAN_ANYG(ni->ni_chan)) { bo->bo_erp = frm; frm = ieee80211_add_erp(frm, ic); } frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain */ } if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { frm = ieee80211_add_htcap(frm, ni); bo->bo_htinfo = frm; frm = ieee80211_add_htinfo(frm, ni); } if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain */ } if (vap->iv_flags & IEEE80211_F_WME) { bo->bo_wme = frm; frm = ieee80211_add_wme_param(frm, &ic->ic_wme); } if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT)) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_ATHEROS) { bo->bo_ath = frm; frm = ieee80211_add_athcaps(frm, ni); } #endif #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { bo->bo_tdma = frm; frm = ieee80211_add_tdma(frm, vap); } #endif if (vap->iv_appie_beacon != NULL) { bo->bo_appie = frm; bo->bo_appie_len = vap->iv_appie_beacon->ie_len; frm = add_appie(frm, vap->iv_appie_beacon); } if (vap->iv_opmode == IEEE80211_M_MBSS) { frm = ieee80211_add_meshid(frm, vap); frm = ieee80211_add_meshconf(frm, vap); } bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer; bo->bo_csa_trailer_len = frm - bo->bo_csa; m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); } /* * Allocate a beacon frame and fillin the appropriate bits. */ struct mbuf * ieee80211_beacon_alloc(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo) { static const uint8_t zerobssid[IEEE80211_ADDR_LEN]; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct mbuf *m; int pktlen; uint8_t *frm; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] TDMA parameters (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) * [tlv] application data (optional) * NB: we allocate the max space required for the TIM bitmap. * XXX how big is this? */ pktlen = 8 /* time stamp */ + sizeof(uint16_t) /* beacon interval */ + sizeof(uint16_t) /* capabilities */ + 2 + ni->ni_esslen /* ssid */ + 2 + IEEE80211_RATE_SIZE /* supported rates */ + 2 + 1 /* DS parameters */ + 2 + 6 /* CF parameters */ + 2 + 4 + vap->iv_tim_len /* DTIM/IBSSPARMS */ + IEEE80211_COUNTRY_MAX_SIZE /* country */ + 2 + 1 /* power control */ + sizeof(struct ieee80211_csa_ie) /* CSA */ + 2 + 1 /* ERP */ + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + (vap->iv_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 2*sizeof(struct ieee80211_ie_wpa) : 0) /* XXX conditional? */ + 4+2*sizeof(struct ieee80211_ie_htcap)/* HT caps */ + 4+2*sizeof(struct ieee80211_ie_htinfo)/* HT info */ + (vap->iv_caps & IEEE80211_C_WME ? /* WME */ sizeof(struct ieee80211_wme_param) : 0) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) /* ATH */ #endif #ifdef IEEE80211_SUPPORT_TDMA + (vap->iv_caps & IEEE80211_C_TDMA ? /* TDMA */ sizeof(struct ieee80211_tdma_param) : 0) #endif + (vap->iv_opmode == IEEE80211_M_MBSS ? 2 + ni->ni_meshidlen : 0) + (vap->iv_opmode == IEEE80211_M_MBSS ? sizeof(struct ieee80211_meshconf_ie) : 0) + IEEE80211_MAX_APPIE ; m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), pktlen); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY, "%s: cannot get buf; size %u\n", __func__, pktlen); vap->iv_stats.is_tx_nobuf++; return NULL; } ieee80211_beacon_construct(m, frm, bo, ni); M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); KASSERT(m != NULL, ("no space for 802.11 header?")); wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(uint16_t *)wh->i_dur = 0; IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); if (vap->iv_opmode == IEEE80211_M_MBSS) IEEE80211_ADDR_COPY(wh->i_addr3, zerobssid); else IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); *(uint16_t *)wh->i_seq = 0; return m; } /* * Update the dynamic parts of a beacon frame based on the current state. */ int ieee80211_beacon_update(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo, struct mbuf *m, int mcast) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int len_changed = 0; uint16_t capinfo; IEEE80211_LOCK(ic); /* * Handle 11h channel change when we've reached the count. * We must recalculate the beacon frame contents to account * for the new channel. Note we do this only for the first * vap that reaches this point; subsequent vaps just update * their beacon state to reflect the recalculated channel. */ if (isset(bo->bo_flags, IEEE80211_BEACON_CSA) && vap->iv_csa_count == ic->ic_csa_count) { vap->iv_csa_count = 0; /* * Effect channel change before reconstructing the beacon * frame contents as many places reference ni_chan. */ if (ic->ic_csa_newchan != NULL) ieee80211_csa_completeswitch(ic); /* * NB: ieee80211_beacon_construct clears all pending * updates in bo_flags so we don't need to explicitly * clear IEEE80211_BEACON_CSA. */ ieee80211_beacon_construct(m, mtod(m, uint8_t*) + sizeof(struct ieee80211_frame), bo, ni); /* XXX do WME aggressive mode processing? */ IEEE80211_UNLOCK(ic); return 1; /* just assume length changed */ } /* XXX faster to recalculate entirely or just changes? */ capinfo = getcapinfo(vap, ni->ni_chan); *bo->bo_caps = htole16(capinfo); if (vap->iv_flags & IEEE80211_F_WME) { struct ieee80211_wme_state *wme = &ic->ic_wme; /* * Check for agressive mode change. When there is * significant high priority traffic in the BSS * throttle back BE traffic by using conservative * parameters. Otherwise BE uses agressive params * to optimize performance of legacy/non-QoS traffic. */ if (wme->wme_flags & WME_F_AGGRMODE) { if (wme->wme_hipri_traffic > wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, disable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags &= ~WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } else wme->wme_hipri_traffic = 0; } else { if (wme->wme_hipri_traffic <= wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, enable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags |= WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = 0; } else wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } if (isset(bo->bo_flags, IEEE80211_BEACON_WME)) { (void) ieee80211_add_wme_param(bo->bo_wme, wme); clrbit(bo->bo_flags, IEEE80211_BEACON_WME); } } if (isset(bo->bo_flags, IEEE80211_BEACON_HTINFO)) { ieee80211_ht_update_beacon(vap, bo); clrbit(bo->bo_flags, IEEE80211_BEACON_HTINFO); } #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { /* * NB: the beacon is potentially updated every TBTT. */ ieee80211_tdma_update_beacon(vap, bo); } #endif if (vap->iv_opmode == IEEE80211_M_MBSS) { /*ieee80211_mesh_update_beacon(vap, bo);*/ } if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* NB: no IBSS support*/ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) bo->bo_tim; if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) { u_int timlen, timoff, i; /* * ATIM/DTIM needs updating. If it fits in the * current space allocated then just copy in the * new bits. Otherwise we need to move any trailing * data to make room. Note that we know there is * contiguous space because ieee80211_beacon_allocate * insures there is space in the mbuf to write a * maximal-size virtual bitmap (based on iv_max_aid). */ /* * Calculate the bitmap size and offset, copy any * trailer out of the way, and then copy in the * new bitmap and update the information element. * Note that the tim bitmap must contain at least * one byte and any offset must be even. */ if (vap->iv_ps_pending != 0) { timoff = 128; /* impossibly large */ for (i = 0; i < vap->iv_tim_len; i++) if (vap->iv_tim_bitmap[i]) { timoff = i &~ 1; break; } KASSERT(timoff != 128, ("tim bitmap empty!")); for (i = vap->iv_tim_len-1; i >= timoff; i--) if (vap->iv_tim_bitmap[i]) break; timlen = 1 + (i - timoff); } else { timoff = 0; timlen = 1; } if (timlen != bo->bo_tim_len) { /* copy up/down trailer */ int adjust = tie->tim_bitmap+timlen - bo->bo_tim_trailer; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_erp += adjust; bo->bo_htinfo += adjust; #ifdef IEEE80211_SUPERG_SUPPORT bo->bo_ath += adjust; #endif #ifdef IEEE80211_TDMA_SUPPORT bo->bo_tdma += adjust; #endif bo->bo_appie += adjust; bo->bo_wme += adjust; bo->bo_csa += adjust; bo->bo_tim_len = timlen; /* update information element */ tie->tim_len = 3 + timlen; tie->tim_bitctl = timoff; len_changed = 1; } memcpy(tie->tim_bitmap, vap->iv_tim_bitmap + timoff, bo->bo_tim_len); clrbit(bo->bo_flags, IEEE80211_BEACON_TIM); IEEE80211_DPRINTF(vap, IEEE80211_MSG_POWER, "%s: TIM updated, pending %u, off %u, len %u\n", __func__, vap->iv_ps_pending, timoff, timlen); } /* count down DTIM period */ if (tie->tim_count == 0) tie->tim_count = tie->tim_period - 1; else tie->tim_count--; /* update state for buffered multicast frames on DTIM */ if (mcast && tie->tim_count == 0) tie->tim_bitctl |= 1; else tie->tim_bitctl &= ~1; if (isset(bo->bo_flags, IEEE80211_BEACON_CSA)) { struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) bo->bo_csa; /* * Insert or update CSA ie. If we're just starting * to count down to the channel switch then we need * to insert the CSA ie. Otherwise we just need to * drop the count. The actual change happens above * when the vap's count reaches the target count. */ if (vap->iv_csa_count == 0) { memmove(&csa[1], csa, bo->bo_csa_trailer_len); bo->bo_erp += sizeof(*csa); bo->bo_htinfo += sizeof(*csa); bo->bo_wme += sizeof(*csa); #ifdef IEEE80211_SUPERG_SUPPORT bo->bo_ath += sizeof(*csa); #endif #ifdef IEEE80211_TDMA_SUPPORT bo->bo_tdma += sizeof(*csa); #endif bo->bo_appie += sizeof(*csa); bo->bo_csa_trailer_len += sizeof(*csa); bo->bo_tim_trailer_len += sizeof(*csa); m->m_len += sizeof(*csa); m->m_pkthdr.len += sizeof(*csa); ieee80211_add_csa(bo->bo_csa, vap); } else csa->csa_count--; vap->iv_csa_count++; /* NB: don't clear IEEE80211_BEACON_CSA */ } if (isset(bo->bo_flags, IEEE80211_BEACON_ERP)) { /* * ERP element needs updating. */ (void) ieee80211_add_erp(bo->bo_erp, ic); clrbit(bo->bo_flags, IEEE80211_BEACON_ERP); } #ifdef IEEE80211_SUPPORT_SUPERG if (isset(bo->bo_flags, IEEE80211_BEACON_ATH)) { ieee80211_add_athcaps(bo->bo_ath, ni); clrbit(bo->bo_flags, IEEE80211_BEACON_ATH); } #endif } if (isset(bo->bo_flags, IEEE80211_BEACON_APPIE)) { const struct ieee80211_appie *aie = vap->iv_appie_beacon; int aielen; uint8_t *frm; aielen = 0; if (aie != NULL) aielen += aie->ie_len; if (aielen != bo->bo_appie_len) { /* copy up/down trailer */ int adjust = aielen - bo->bo_appie_len; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_appie += adjust; bo->bo_appie_len = aielen; len_changed = 1; } frm = bo->bo_appie; if (aie != NULL) frm = add_appie(frm, aie); clrbit(bo->bo_flags, IEEE80211_BEACON_APPIE); } IEEE80211_UNLOCK(ic); return len_changed; } Index: projects/mesh11s/sys/net80211/ieee80211_proto.h =================================================================== --- projects/mesh11s/sys/net80211/ieee80211_proto.h (revision 191688) +++ projects/mesh11s/sys/net80211/ieee80211_proto.h (revision 191689) @@ -1,372 +1,373 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_PROTO_H_ #define _NET80211_IEEE80211_PROTO_H_ /* * 802.11 protocol implementation definitions. */ enum ieee80211_state { IEEE80211_S_INIT = 0, /* default state */ IEEE80211_S_SCAN = 1, /* scanning */ IEEE80211_S_AUTH = 2, /* try to authenticate */ IEEE80211_S_ASSOC = 3, /* try to assoc */ IEEE80211_S_CAC = 4, /* doing channel availability check */ IEEE80211_S_RUN = 5, /* operational (e.g. associated) */ IEEE80211_S_CSA = 6, /* channel switch announce pending */ IEEE80211_S_SLEEP = 7, /* power save */ }; #define IEEE80211_S_MAX (IEEE80211_S_SLEEP+1) #define IEEE80211_SEND_MGMT(_ni,_type,_arg) \ ((*(_ni)->ni_ic->ic_send_mgmt)(_ni, _type, _arg)) extern const char *ieee80211_mgt_subtype_name[]; extern const char *ieee80211_phymode_name[IEEE80211_MODE_MAX]; extern const int ieee80211_opcap[IEEE80211_OPMODE_MAX]; void ieee80211_proto_attach(struct ieee80211com *); void ieee80211_proto_detach(struct ieee80211com *); void ieee80211_proto_vattach(struct ieee80211vap *); void ieee80211_proto_vdetach(struct ieee80211vap *); void ieee80211_syncifflag_locked(struct ieee80211com *, int flag); void ieee80211_syncflag(struct ieee80211vap *, int flag); void ieee80211_syncflag_ext(struct ieee80211vap *, int flag); #define ieee80211_input(ni, m, rssi, noise, rstamp) \ ((ni)->ni_vap->iv_input(ni, m, rssi, noise, rstamp)) int ieee80211_input_all(struct ieee80211com *, struct mbuf *, int, int, uint32_t); struct ieee80211_bpf_params; +int ieee80211_send_action(struct ieee80211_node *, int, int, uint16_t [4]); int ieee80211_mgmt_output(struct ieee80211_node *, struct mbuf *, int, struct ieee80211_bpf_params *); int ieee80211_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); int ieee80211_output(struct ifnet *, struct mbuf *, struct sockaddr *, struct route *ro); void ieee80211_start(struct ifnet *); int ieee80211_send_nulldata(struct ieee80211_node *); int ieee80211_classify(struct ieee80211_node *, struct mbuf *m); struct mbuf *ieee80211_mbuf_adjust(struct ieee80211vap *, int, struct ieee80211_key *, struct mbuf *); struct mbuf *ieee80211_encap(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); int ieee80211_send_mgmt(struct ieee80211_node *, int, int); struct ieee80211_appie; int ieee80211_send_probereq(struct ieee80211_node *ni, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t *ssid, size_t ssidlen); /* * The formation of ProbeResponse frames requires guidance to * deal with legacy clients. When the client is identified as * "legacy 11b" ieee80211_send_proberesp is passed this token. */ #define IEEE80211_SEND_LEGACY_11B 0x1 /* legacy 11b client */ #define IEEE80211_SEND_LEGACY_11 0x2 /* other legacy client */ #define IEEE80211_SEND_LEGACY 0x3 /* any legacy client */ struct mbuf *ieee80211_alloc_proberesp(struct ieee80211_node *, int); int ieee80211_send_proberesp(struct ieee80211vap *, const uint8_t da[IEEE80211_ADDR_LEN], int); struct mbuf *ieee80211_alloc_rts(struct ieee80211com *ic, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN], uint16_t); struct mbuf *ieee80211_alloc_cts(struct ieee80211com *, const uint8_t [IEEE80211_ADDR_LEN], uint16_t); void ieee80211_reset_erp(struct ieee80211com *); void ieee80211_set_shortslottime(struct ieee80211com *, int onoff); int ieee80211_iserp_rateset(const struct ieee80211_rateset *); void ieee80211_setbasicrates(struct ieee80211_rateset *, enum ieee80211_phymode); void ieee80211_addbasicrates(struct ieee80211_rateset *, enum ieee80211_phymode); /* * Return the size of the 802.11 header for a management or data frame. */ static __inline int ieee80211_hdrsize(const void *data) { const struct ieee80211_frame *wh = data; int size = sizeof(struct ieee80211_frame); /* NB: we don't handle control frames */ KASSERT((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL, ("%s: control frame", __func__)); if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) size += IEEE80211_ADDR_LEN; if (IEEE80211_QOS_HAS_SEQ(wh)) size += sizeof(uint16_t); return size; } /* * Like ieee80211_hdrsize, but handles any type of frame. */ static __inline int ieee80211_anyhdrsize(const void *data) { const struct ieee80211_frame *wh = data; if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) { switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) { case IEEE80211_FC0_SUBTYPE_CTS: case IEEE80211_FC0_SUBTYPE_ACK: return sizeof(struct ieee80211_frame_ack); case IEEE80211_FC0_SUBTYPE_BAR: return sizeof(struct ieee80211_frame_bar); } return sizeof(struct ieee80211_frame_min); } else return ieee80211_hdrsize(data); } /* * Template for an in-kernel authenticator. Authenticators * register with the protocol code and are typically loaded * as separate modules as needed. One special authenticator * is xauth; it intercepts requests so that protocols like * WPA can be handled in user space. */ struct ieee80211_authenticator { const char *ia_name; /* printable name */ int (*ia_attach)(struct ieee80211vap *); void (*ia_detach)(struct ieee80211vap *); void (*ia_node_join)(struct ieee80211_node *); void (*ia_node_leave)(struct ieee80211_node *); }; void ieee80211_authenticator_register(int type, const struct ieee80211_authenticator *); void ieee80211_authenticator_unregister(int type); const struct ieee80211_authenticator *ieee80211_authenticator_get(int auth); struct ieee80211req; /* * Template for an MAC ACL policy module. Such modules * register with the protocol code and are passed the sender's * address of each received auth frame for validation. */ struct ieee80211_aclator { const char *iac_name; /* printable name */ int (*iac_attach)(struct ieee80211vap *); void (*iac_detach)(struct ieee80211vap *); int (*iac_check)(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); int (*iac_add)(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); int (*iac_remove)(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); int (*iac_flush)(struct ieee80211vap *); int (*iac_setpolicy)(struct ieee80211vap *, int); int (*iac_getpolicy)(struct ieee80211vap *); int (*iac_setioctl)(struct ieee80211vap *, struct ieee80211req *); int (*iac_getioctl)(struct ieee80211vap *, struct ieee80211req *); }; void ieee80211_aclator_register(const struct ieee80211_aclator *); void ieee80211_aclator_unregister(const struct ieee80211_aclator *); const struct ieee80211_aclator *ieee80211_aclator_get(const char *name); /* flags for ieee80211_fix_rate() */ #define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */ #define IEEE80211_F_DOFRATE 0x00000002 /* use fixed legacy rate */ #define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */ #define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */ #define IEEE80211_F_DOBRS 0x00000010 /* check basic rate set */ #define IEEE80211_F_JOIN 0x00000020 /* sta joining our bss */ #define IEEE80211_F_DOFMCS 0x00000040 /* use fixed HT rate */ int ieee80211_fix_rate(struct ieee80211_node *, struct ieee80211_rateset *, int); /* * WME/WMM support. */ struct wmeParams { uint8_t wmep_acm; uint8_t wmep_aifsn; uint8_t wmep_logcwmin; /* log2(cwmin) */ uint8_t wmep_logcwmax; /* log2(cwmax) */ uint8_t wmep_txopLimit; uint8_t wmep_noackPolicy; /* 0 (ack), 1 (no ack) */ }; #define IEEE80211_TXOP_TO_US(_txop) ((_txop)<<5) #define IEEE80211_US_TO_TXOP(_us) ((_us)>>5) struct chanAccParams { uint8_t cap_info; /* version of the current set */ struct wmeParams cap_wmeParams[WME_NUM_AC]; }; struct ieee80211_wme_state { u_int wme_flags; #define WME_F_AGGRMODE 0x00000001 /* STATUS: WME agressive mode */ u_int wme_hipri_traffic; /* VI/VO frames in beacon interval */ u_int wme_hipri_switch_thresh;/* agressive mode switch thresh */ u_int wme_hipri_switch_hysteresis;/* agressive mode switch hysteresis */ struct wmeParams wme_params[4]; /* from assoc resp for each AC*/ struct chanAccParams wme_wmeChanParams; /* WME params applied to self */ struct chanAccParams wme_wmeBssChanParams;/* WME params bcast to stations */ struct chanAccParams wme_chanParams; /* params applied to self */ struct chanAccParams wme_bssChanParams; /* params bcast to stations */ int (*wme_update)(struct ieee80211com *); }; void ieee80211_wme_initparams(struct ieee80211vap *); void ieee80211_wme_updateparams(struct ieee80211vap *); void ieee80211_wme_updateparams_locked(struct ieee80211vap *); /* * Return the WME TID from a QoS frame. If no TID * is present return the index for the "non-QoS" entry. */ static __inline uint8_t ieee80211_gettid(const struct ieee80211_frame *wh) { uint8_t tid; if (IEEE80211_QOS_HAS_SEQ(wh)) { tid = ((const struct ieee80211_qosframe *)wh)-> i_qos[0] & IEEE80211_QOS_TID; tid++; } else tid = IEEE80211_NONQOS_TID; return tid; } void ieee80211_waitfor_parent(struct ieee80211com *); void ieee80211_start_locked(struct ieee80211vap *); void ieee80211_init(void *); void ieee80211_start_all(struct ieee80211com *); void ieee80211_stop_locked(struct ieee80211vap *); void ieee80211_stop(struct ieee80211vap *); void ieee80211_stop_all(struct ieee80211com *); void ieee80211_suspend_all(struct ieee80211com *); void ieee80211_resume_all(struct ieee80211com *); void ieee80211_dturbo_switch(struct ieee80211vap *, int newflags); void ieee80211_swbmiss(void *arg); void ieee80211_beacon_miss(struct ieee80211com *); int ieee80211_new_state(struct ieee80211vap *, enum ieee80211_state, int); void ieee80211_print_essid(const uint8_t *, int); void ieee80211_dump_pkt(struct ieee80211com *, const uint8_t *, int, int, int); extern const char *ieee80211_opmode_name[]; extern const char *ieee80211_state_name[IEEE80211_S_MAX]; extern const char *ieee80211_wme_acnames[]; /* * Beacon frames constructed by ieee80211_beacon_alloc * have the following structure filled in so drivers * can update the frame later w/ minimal overhead. */ struct ieee80211_beacon_offsets { uint8_t bo_flags[4]; /* update/state flags */ uint16_t *bo_caps; /* capabilities */ uint8_t *bo_cfp; /* start of CFParms element */ uint8_t *bo_tim; /* start of atim/dtim */ uint8_t *bo_wme; /* start of WME parameters */ uint8_t *bo_tdma; /* start of TDMA parameters */ uint8_t *bo_tim_trailer;/* start of fixed-size trailer */ uint16_t bo_tim_len; /* atim/dtim length in bytes */ uint16_t bo_tim_trailer_len;/* tim trailer length in bytes */ uint8_t *bo_erp; /* start of ERP element */ uint8_t *bo_htinfo; /* start of HT info element */ uint8_t *bo_ath; /* start of ATH parameters */ uint8_t *bo_appie; /* start of AppIE element */ uint16_t bo_appie_len; /* AppIE length in bytes */ uint16_t bo_csa_trailer_len;; uint8_t *bo_csa; /* start of CSA element */ }; struct mbuf *ieee80211_beacon_alloc(struct ieee80211_node *, struct ieee80211_beacon_offsets *); /* * Beacon frame updates are signaled through calls to iv_update_beacon * with one of the IEEE80211_BEACON_* tokens defined below. For devices * that construct beacon frames on the host this can trigger a rebuild * or defer the processing. For devices that offload beacon frame * handling this callback can be used to signal a rebuild. The bo_flags * array in the ieee80211_beacon_offsets structure is intended to record * deferred processing requirements; ieee80211_beacon_update uses the * state to optimize work. Since this structure is owned by the driver * and not visible to the 802.11 layer drivers must supply an iv_update_beacon * callback that marks the flag bits and schedules (as necessary) an update. */ enum { IEEE80211_BEACON_CAPS = 0, /* capabilities */ IEEE80211_BEACON_TIM = 1, /* DTIM/ATIM */ IEEE80211_BEACON_WME = 2, IEEE80211_BEACON_ERP = 3, /* Extended Rate Phy */ IEEE80211_BEACON_HTINFO = 4, /* HT Information */ IEEE80211_BEACON_APPIE = 5, /* Application IE's */ IEEE80211_BEACON_CFP = 6, /* CFParms */ IEEE80211_BEACON_CSA = 7, /* Channel Switch Announcement */ IEEE80211_BEACON_TDMA = 9, /* TDMA Info */ IEEE80211_BEACON_ATH = 10, /* ATH parameters */ }; int ieee80211_beacon_update(struct ieee80211_node *, struct ieee80211_beacon_offsets *, struct mbuf *, int mcast); void ieee80211_csa_startswitch(struct ieee80211com *, struct ieee80211_channel *, int mode, int count); void ieee80211_csa_completeswitch(struct ieee80211com *); void ieee80211_cac_completeswitch(struct ieee80211vap *); /* * Notification methods called from the 802.11 state machine. * Note that while these are defined here, their implementation * is OS-specific. */ void ieee80211_notify_node_join(struct ieee80211_node *, int newassoc); void ieee80211_notify_node_leave(struct ieee80211_node *); void ieee80211_notify_scan_done(struct ieee80211vap *); void ieee80211_notify_wds_discover(struct ieee80211_node *); void ieee80211_notify_csa(struct ieee80211com *, const struct ieee80211_channel *, int mode, int count); void ieee80211_notify_radar(struct ieee80211com *, const struct ieee80211_channel *); enum ieee80211_notify_cac_event { IEEE80211_NOTIFY_CAC_START = 0, /* CAC timer started */ IEEE80211_NOTIFY_CAC_STOP = 1, /* CAC intentionally stopped */ IEEE80211_NOTIFY_CAC_RADAR = 2, /* CAC stopped due to radar detectio */ IEEE80211_NOTIFY_CAC_EXPIRE = 3, /* CAC expired w/o radar */ }; void ieee80211_notify_cac(struct ieee80211com *, const struct ieee80211_channel *, enum ieee80211_notify_cac_event); void ieee80211_notify_node_deauth(struct ieee80211_node *); void ieee80211_notify_node_auth(struct ieee80211_node *); void ieee80211_notify_country(struct ieee80211vap *, const uint8_t [], const uint8_t cc[2]); void ieee80211_notify_radio(struct ieee80211com *, int); #endif /* _NET80211_IEEE80211_PROTO_H_ */