Index: head/sys/net80211/ieee80211_ioctl.c =================================================================== --- head/sys/net80211/ieee80211_ioctl.c (revision 191554) +++ head/sys/net80211/ieee80211_ioctl.c (revision 191555) @@ -1,3337 +1,3342 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 ioctl support (FreeBSD-specific) */ #include "opt_inet.h" #include "opt_ipx.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #ifdef IPX #include #include #endif #include #include #include #include #define IS_UP_AUTO(_vap) \ (IFNET_IS_UP_RUNNING(vap->iv_ifp) && \ (_vap)->iv_roaming == IEEE80211_ROAMING_AUTO) static const uint8_t zerobssid[IEEE80211_ADDR_LEN]; static struct ieee80211_channel *findchannel(struct ieee80211com *, int ieee, int mode); static __noinline int ieee80211_ioctl_getkey(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; struct ieee80211req_key ik; struct ieee80211_key *wk; const struct ieee80211_cipher *cip; u_int kid; int error; if (ireq->i_len != sizeof(ik)) return EINVAL; error = copyin(ireq->i_data, &ik, sizeof(ik)); if (error) return error; kid = ik.ik_keyix; if (kid == IEEE80211_KEYIX_NONE) { ni = ieee80211_find_vap_node(&ic->ic_sta, vap, ik.ik_macaddr); if (ni == NULL) return ENOENT; wk = &ni->ni_ucastkey; } else { if (kid >= IEEE80211_WEP_NKID) return EINVAL; wk = &vap->iv_nw_keys[kid]; IEEE80211_ADDR_COPY(&ik.ik_macaddr, vap->iv_bss->ni_macaddr); ni = NULL; } cip = wk->wk_cipher; ik.ik_type = cip->ic_cipher; ik.ik_keylen = wk->wk_keylen; ik.ik_flags = wk->wk_flags & (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV); if (wk->wk_keyix == vap->iv_def_txkey) ik.ik_flags |= IEEE80211_KEY_DEFAULT; if (priv_check(curthread, PRIV_NET80211_GETKEY) == 0) { /* NB: only root can read key data */ ik.ik_keyrsc = wk->wk_keyrsc[IEEE80211_NONQOS_TID]; ik.ik_keytsc = wk->wk_keytsc; memcpy(ik.ik_keydata, wk->wk_key, wk->wk_keylen); if (cip->ic_cipher == IEEE80211_CIPHER_TKIP) { memcpy(ik.ik_keydata+wk->wk_keylen, wk->wk_key + IEEE80211_KEYBUF_SIZE, IEEE80211_MICBUF_SIZE); ik.ik_keylen += IEEE80211_MICBUF_SIZE; } } else { ik.ik_keyrsc = 0; ik.ik_keytsc = 0; memset(ik.ik_keydata, 0, sizeof(ik.ik_keydata)); } if (ni != NULL) ieee80211_free_node(ni); return copyout(&ik, ireq->i_data, sizeof(ik)); } static __noinline int ieee80211_ioctl_getchanlist(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; if (sizeof(ic->ic_chan_active) < ireq->i_len) ireq->i_len = sizeof(ic->ic_chan_active); return copyout(&ic->ic_chan_active, ireq->i_data, ireq->i_len); } static __noinline int ieee80211_ioctl_getchaninfo(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; int space; space = __offsetof(struct ieee80211req_chaninfo, ic_chans[ic->ic_nchans]); if (space > ireq->i_len) space = ireq->i_len; /* XXX assumes compatible layout */ return copyout(&ic->ic_nchans, ireq->i_data, space); } static __noinline int ieee80211_ioctl_getwpaie(struct ieee80211vap *vap, struct ieee80211req *ireq, int req) { struct ieee80211_node *ni; struct ieee80211req_wpaie2 wpaie; int error; if (ireq->i_len < IEEE80211_ADDR_LEN) return EINVAL; error = copyin(ireq->i_data, wpaie.wpa_macaddr, IEEE80211_ADDR_LEN); if (error != 0) return error; ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, wpaie.wpa_macaddr); if (ni == NULL) return ENOENT; memset(wpaie.wpa_ie, 0, sizeof(wpaie.wpa_ie)); if (ni->ni_ies.wpa_ie != NULL) { int ielen = ni->ni_ies.wpa_ie[1] + 2; if (ielen > sizeof(wpaie.wpa_ie)) ielen = sizeof(wpaie.wpa_ie); memcpy(wpaie.wpa_ie, ni->ni_ies.wpa_ie, ielen); } if (req == IEEE80211_IOC_WPAIE2) { memset(wpaie.rsn_ie, 0, sizeof(wpaie.rsn_ie)); if (ni->ni_ies.rsn_ie != NULL) { int ielen = ni->ni_ies.rsn_ie[1] + 2; if (ielen > sizeof(wpaie.rsn_ie)) ielen = sizeof(wpaie.rsn_ie); memcpy(wpaie.rsn_ie, ni->ni_ies.rsn_ie, ielen); } if (ireq->i_len > sizeof(struct ieee80211req_wpaie2)) ireq->i_len = sizeof(struct ieee80211req_wpaie2); } else { /* compatibility op, may overwrite wpa ie */ /* XXX check ic_flags? */ if (ni->ni_ies.rsn_ie != NULL) { int ielen = ni->ni_ies.rsn_ie[1] + 2; if (ielen > sizeof(wpaie.wpa_ie)) ielen = sizeof(wpaie.wpa_ie); memcpy(wpaie.wpa_ie, ni->ni_ies.rsn_ie, ielen); } if (ireq->i_len > sizeof(struct ieee80211req_wpaie)) ireq->i_len = sizeof(struct ieee80211req_wpaie); } ieee80211_free_node(ni); return copyout(&wpaie, ireq->i_data, ireq->i_len); } static __noinline int ieee80211_ioctl_getstastats(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; uint8_t macaddr[IEEE80211_ADDR_LEN]; const int off = __offsetof(struct ieee80211req_sta_stats, is_stats); int error; if (ireq->i_len < off) return EINVAL; error = copyin(ireq->i_data, macaddr, IEEE80211_ADDR_LEN); if (error != 0) return error; ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, macaddr); if (ni == NULL) return ENOENT; if (ireq->i_len > sizeof(struct ieee80211req_sta_stats)) ireq->i_len = sizeof(struct ieee80211req_sta_stats); /* NB: copy out only the statistics */ error = copyout(&ni->ni_stats, (uint8_t *) ireq->i_data + off, ireq->i_len - off); ieee80211_free_node(ni); return error; } struct scanreq { struct ieee80211req_scan_result *sr; size_t space; }; static size_t scan_space(const struct ieee80211_scan_entry *se, int *ielen) { size_t len; *ielen = se->se_ies.len; /* * NB: ie's can be no more than 255 bytes and the max 802.11 * packet is <3Kbytes so we are sure this doesn't overflow * 16-bits; if this is a concern we can drop the ie's. */ len = sizeof(struct ieee80211req_scan_result) + se->se_ssid[1] + *ielen; return roundup(len, sizeof(uint32_t)); } static void get_scan_space(void *arg, const struct ieee80211_scan_entry *se) { struct scanreq *req = arg; int ielen; req->space += scan_space(se, &ielen); } static __noinline void get_scan_result(void *arg, const struct ieee80211_scan_entry *se) { struct scanreq *req = arg; struct ieee80211req_scan_result *sr; int ielen, len, nr, nxr; uint8_t *cp; len = scan_space(se, &ielen); if (len > req->space) return; sr = req->sr; KASSERT(len <= 65535 && ielen <= 65535, ("len %u ssid %u ie %u", len, se->se_ssid[1], ielen)); sr->isr_len = len; sr->isr_ie_off = sizeof(struct ieee80211req_scan_result); sr->isr_ie_len = ielen; sr->isr_freq = se->se_chan->ic_freq; sr->isr_flags = se->se_chan->ic_flags; sr->isr_rssi = se->se_rssi; sr->isr_noise = se->se_noise; sr->isr_intval = se->se_intval; sr->isr_capinfo = se->se_capinfo; sr->isr_erp = se->se_erp; IEEE80211_ADDR_COPY(sr->isr_bssid, se->se_bssid); nr = min(se->se_rates[1], IEEE80211_RATE_MAXSIZE); memcpy(sr->isr_rates, se->se_rates+2, nr); nxr = min(se->se_xrates[1], IEEE80211_RATE_MAXSIZE - nr); memcpy(sr->isr_rates+nr, se->se_xrates+2, nxr); sr->isr_nrates = nr + nxr; sr->isr_ssid_len = se->se_ssid[1]; cp = ((uint8_t *)sr) + sr->isr_ie_off; memcpy(cp, se->se_ssid+2, sr->isr_ssid_len); if (ielen) { cp += sr->isr_ssid_len; memcpy(cp, se->se_ies.data, ielen); } req->space -= len; req->sr = (struct ieee80211req_scan_result *)(((uint8_t *)sr) + len); } static __noinline int ieee80211_ioctl_getscanresults(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct scanreq req; int error; if (ireq->i_len < sizeof(struct scanreq)) return EFAULT; error = 0; req.space = 0; ieee80211_scan_iterate(vap, get_scan_space, &req); if (req.space > ireq->i_len) req.space = ireq->i_len; if (req.space > 0) { size_t space; void *p; space = req.space; /* XXX M_WAITOK after driver lock released */ p = malloc(space, M_TEMP, M_NOWAIT | M_ZERO); if (p == NULL) return ENOMEM; req.sr = p; ieee80211_scan_iterate(vap, get_scan_result, &req); ireq->i_len = space - req.space; error = copyout(p, ireq->i_data, ireq->i_len); free(p, M_TEMP); } else ireq->i_len = 0; return error; } struct stainforeq { struct ieee80211vap *vap; struct ieee80211req_sta_info *si; size_t space; }; static size_t sta_space(const struct ieee80211_node *ni, size_t *ielen) { *ielen = ni->ni_ies.len; return roundup(sizeof(struct ieee80211req_sta_info) + *ielen, sizeof(uint32_t)); } static void get_sta_space(void *arg, struct ieee80211_node *ni) { struct stainforeq *req = arg; size_t ielen; if (req->vap != ni->ni_vap) return; if (ni->ni_vap->iv_opmode == IEEE80211_M_HOSTAP && ni->ni_associd == 0) /* only associated stations */ return; req->space += sta_space(ni, &ielen); } static __noinline void get_sta_info(void *arg, struct ieee80211_node *ni) { struct stainforeq *req = arg; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211req_sta_info *si; size_t ielen, len; uint8_t *cp; if (req->vap != ni->ni_vap) return; if (vap->iv_opmode == IEEE80211_M_HOSTAP && ni->ni_associd == 0) /* only associated stations */ return; if (ni->ni_chan == IEEE80211_CHAN_ANYC) /* XXX bogus entry */ return; len = sta_space(ni, &ielen); if (len > req->space) return; si = req->si; si->isi_len = len; si->isi_ie_off = sizeof(struct ieee80211req_sta_info); si->isi_ie_len = ielen; si->isi_freq = ni->ni_chan->ic_freq; si->isi_flags = ni->ni_chan->ic_flags; si->isi_state = ni->ni_flags; si->isi_authmode = ni->ni_authmode; vap->iv_ic->ic_node_getsignal(ni, &si->isi_rssi, &si->isi_noise); vap->iv_ic->ic_node_getmimoinfo(ni, &si->isi_mimo); si->isi_capinfo = ni->ni_capinfo; si->isi_erp = ni->ni_erp; IEEE80211_ADDR_COPY(si->isi_macaddr, ni->ni_macaddr); si->isi_nrates = ni->ni_rates.rs_nrates; if (si->isi_nrates > 15) si->isi_nrates = 15; memcpy(si->isi_rates, ni->ni_rates.rs_rates, si->isi_nrates); si->isi_txrate = ni->ni_txrate; if (si->isi_txrate & IEEE80211_RATE_MCS) { const struct ieee80211_mcs_rates *mcs = &ieee80211_htrates[ni->ni_txrate &~ IEEE80211_RATE_MCS]; if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) si->isi_txmbps = mcs->ht40_rate_800ns; else si->isi_txmbps = mcs->ht40_rate_400ns; } else { if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) si->isi_txmbps = mcs->ht20_rate_800ns; else si->isi_txmbps = mcs->ht20_rate_400ns; } } else si->isi_txmbps = si->isi_txrate; si->isi_associd = ni->ni_associd; si->isi_txpower = ni->ni_txpower; si->isi_vlan = ni->ni_vlan; if (ni->ni_flags & IEEE80211_NODE_QOS) { memcpy(si->isi_txseqs, ni->ni_txseqs, sizeof(ni->ni_txseqs)); memcpy(si->isi_rxseqs, ni->ni_rxseqs, sizeof(ni->ni_rxseqs)); } else { si->isi_txseqs[0] = ni->ni_txseqs[IEEE80211_NONQOS_TID]; si->isi_rxseqs[0] = ni->ni_rxseqs[IEEE80211_NONQOS_TID]; } /* NB: leave all cases in case we relax ni_associd == 0 check */ if (ieee80211_node_is_authorized(ni)) si->isi_inact = vap->iv_inact_run; else if (ni->ni_associd != 0 || (vap->iv_opmode == IEEE80211_M_WDS && (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) si->isi_inact = vap->iv_inact_auth; else si->isi_inact = vap->iv_inact_init; si->isi_inact = (si->isi_inact - ni->ni_inact) * IEEE80211_INACT_WAIT; if (ielen) { cp = ((uint8_t *)si) + si->isi_ie_off; memcpy(cp, ni->ni_ies.data, ielen); } req->si = (struct ieee80211req_sta_info *)(((uint8_t *)si) + len); req->space -= len; } static __noinline int getstainfo_common(struct ieee80211vap *vap, struct ieee80211req *ireq, struct ieee80211_node *ni, int off) { struct ieee80211com *ic = vap->iv_ic; struct stainforeq req; size_t space; void *p; int error; error = 0; req.space = 0; req.vap = vap; if (ni == NULL) ieee80211_iterate_nodes(&ic->ic_sta, get_sta_space, &req); else get_sta_space(&req, ni); if (req.space > ireq->i_len) req.space = ireq->i_len; if (req.space > 0) { space = req.space; /* XXX M_WAITOK after driver lock released */ p = malloc(space, M_TEMP, M_NOWAIT | M_ZERO); if (p == NULL) { error = ENOMEM; goto bad; } req.si = p; if (ni == NULL) ieee80211_iterate_nodes(&ic->ic_sta, get_sta_info, &req); else get_sta_info(&req, ni); ireq->i_len = space - req.space; error = copyout(p, (uint8_t *) ireq->i_data+off, ireq->i_len); free(p, M_TEMP); } else ireq->i_len = 0; bad: if (ni != NULL) ieee80211_free_node(ni); return error; } static __noinline int ieee80211_ioctl_getstainfo(struct ieee80211vap *vap, struct ieee80211req *ireq) { uint8_t macaddr[IEEE80211_ADDR_LEN]; const int off = __offsetof(struct ieee80211req_sta_req, info); struct ieee80211_node *ni; int error; if (ireq->i_len < sizeof(struct ieee80211req_sta_req)) return EFAULT; error = copyin(ireq->i_data, macaddr, IEEE80211_ADDR_LEN); if (error != 0) return error; if (IEEE80211_ADDR_EQ(macaddr, vap->iv_ifp->if_broadcastaddr)) { ni = NULL; } else { ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, macaddr); if (ni == NULL) return ENOENT; } return getstainfo_common(vap, ireq, ni, off); } static __noinline int ieee80211_ioctl_getstatxpow(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; struct ieee80211req_sta_txpow txpow; int error; if (ireq->i_len != sizeof(txpow)) return EINVAL; error = copyin(ireq->i_data, &txpow, sizeof(txpow)); if (error != 0) return error; ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, txpow.it_macaddr); if (ni == NULL) return ENOENT; txpow.it_txpow = ni->ni_txpower; error = copyout(&txpow, ireq->i_data, sizeof(txpow)); ieee80211_free_node(ni); return error; } static __noinline int ieee80211_ioctl_getwmeparam(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_wme_state *wme = &ic->ic_wme; struct wmeParams *wmep; int ac; if ((ic->ic_caps & IEEE80211_C_WME) == 0) return EINVAL; ac = (ireq->i_len & IEEE80211_WMEPARAM_VAL); if (ac >= WME_NUM_AC) ac = WME_AC_BE; if (ireq->i_len & IEEE80211_WMEPARAM_BSS) wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[ac]; else wmep = &wme->wme_wmeChanParams.cap_wmeParams[ac]; switch (ireq->i_type) { case IEEE80211_IOC_WME_CWMIN: /* WME: CWmin */ ireq->i_val = wmep->wmep_logcwmin; break; case IEEE80211_IOC_WME_CWMAX: /* WME: CWmax */ ireq->i_val = wmep->wmep_logcwmax; break; case IEEE80211_IOC_WME_AIFS: /* WME: AIFS */ ireq->i_val = wmep->wmep_aifsn; break; case IEEE80211_IOC_WME_TXOPLIMIT: /* WME: txops limit */ ireq->i_val = wmep->wmep_txopLimit; break; case IEEE80211_IOC_WME_ACM: /* WME: ACM (bss only) */ wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[ac]; ireq->i_val = wmep->wmep_acm; break; case IEEE80211_IOC_WME_ACKPOLICY: /* WME: ACK policy (!bss only)*/ wmep = &wme->wme_wmeChanParams.cap_wmeParams[ac]; ireq->i_val = !wmep->wmep_noackPolicy; break; } return 0; } static __noinline int ieee80211_ioctl_getmaccmd(struct ieee80211vap *vap, struct ieee80211req *ireq) { const struct ieee80211_aclator *acl = vap->iv_acl; return (acl == NULL ? EINVAL : acl->iac_getioctl(vap, ireq)); } static __noinline int ieee80211_ioctl_getcurchan(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_channel *c; if (ireq->i_len != sizeof(struct ieee80211_channel)) return EINVAL; /* * vap's may have different operating channels when HT is * in use. When in RUN state report the vap-specific channel. * Otherwise return curchan. */ if (vap->iv_state == IEEE80211_S_RUN) c = vap->iv_bss->ni_chan; else c = ic->ic_curchan; return copyout(c, ireq->i_data, sizeof(*c)); } static int getappie(const struct ieee80211_appie *aie, struct ieee80211req *ireq) { if (aie == NULL) return EINVAL; /* NB: truncate, caller can check length */ if (ireq->i_len > aie->ie_len) ireq->i_len = aie->ie_len; return copyout(aie->ie_data, ireq->i_data, ireq->i_len); } static int ieee80211_ioctl_getappie(struct ieee80211vap *vap, struct ieee80211req *ireq) { uint8_t fc0; fc0 = ireq->i_val & 0xff; if ((fc0 & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_MGT) return EINVAL; /* NB: could check iv_opmode and reject but hardly worth the effort */ switch (fc0 & IEEE80211_FC0_SUBTYPE_MASK) { case IEEE80211_FC0_SUBTYPE_BEACON: return getappie(vap->iv_appie_beacon, ireq); case IEEE80211_FC0_SUBTYPE_PROBE_RESP: return getappie(vap->iv_appie_proberesp, ireq); case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: return getappie(vap->iv_appie_assocresp, ireq); case IEEE80211_FC0_SUBTYPE_PROBE_REQ: return getappie(vap->iv_appie_probereq, ireq); case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: return getappie(vap->iv_appie_assocreq, ireq); case IEEE80211_FC0_SUBTYPE_BEACON|IEEE80211_FC0_SUBTYPE_PROBE_RESP: return getappie(vap->iv_appie_wpa, ireq); } return EINVAL; } static __noinline int ieee80211_ioctl_getregdomain(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; if (ireq->i_len != sizeof(ic->ic_regdomain)) return EINVAL; return copyout(&ic->ic_regdomain, ireq->i_data, sizeof(ic->ic_regdomain)); } static __noinline int ieee80211_ioctl_getroam(struct ieee80211vap *vap, const struct ieee80211req *ireq) { size_t len = ireq->i_len; /* NB: accept short requests for backwards compat */ if (len > sizeof(vap->iv_roamparms)) len = sizeof(vap->iv_roamparms); return copyout(vap->iv_roamparms, ireq->i_data, len); } static __noinline int ieee80211_ioctl_gettxparams(struct ieee80211vap *vap, const struct ieee80211req *ireq) { size_t len = ireq->i_len; /* NB: accept short requests for backwards compat */ if (len > sizeof(vap->iv_txparms)) len = sizeof(vap->iv_txparms); return copyout(vap->iv_txparms, ireq->i_data, len); } static __noinline int ieee80211_ioctl_getdevcaps(struct ieee80211com *ic, const struct ieee80211req *ireq) { struct ieee80211_devcaps_req *dc; struct ieee80211req_chaninfo *ci; int maxchans, error; maxchans = 1 + ((ireq->i_len - sizeof(struct ieee80211_devcaps_req)) / sizeof(struct ieee80211_channel)); /* NB: require 1 so we know ic_nchans is accessible */ if (maxchans < 1) return EINVAL; /* constrain max request size, 2K channels is ~24Kbytes */ if (maxchans > 2048) maxchans = 2048; dc = (struct ieee80211_devcaps_req *) malloc(IEEE80211_DEVCAPS_SIZE(maxchans), M_TEMP, M_NOWAIT | M_ZERO); if (dc == NULL) return ENOMEM; dc->dc_drivercaps = ic->ic_caps; dc->dc_cryptocaps = ic->ic_cryptocaps; dc->dc_htcaps = ic->ic_htcaps; ci = &dc->dc_chaninfo; ic->ic_getradiocaps(ic, maxchans, &ci->ic_nchans, ci->ic_chans); KASSERT(ci->ic_nchans <= maxchans, ("nchans %d maxchans %d", ci->ic_nchans, maxchans)); ieee80211_sort_channels(ci->ic_chans, ci->ic_nchans); error = copyout(dc, ireq->i_data, IEEE80211_DEVCAPS_SPACE(dc)); free(dc, M_TEMP); return error; } static __noinline int ieee80211_ioctl_getstavlan(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; struct ieee80211req_sta_vlan vlan; int error; if (ireq->i_len != sizeof(vlan)) return EINVAL; error = copyin(ireq->i_data, &vlan, sizeof(vlan)); if (error != 0) return error; if (!IEEE80211_ADDR_EQ(vlan.sv_macaddr, zerobssid)) { ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, vlan.sv_macaddr); if (ni == NULL) return ENOENT; } else ni = ieee80211_ref_node(vap->iv_bss); vlan.sv_vlan = ni->ni_vlan; error = copyout(&vlan, ireq->i_data, sizeof(vlan)); ieee80211_free_node(ni); return error; } /* * Dummy ioctl get handler so the linker set is defined. */ static int dummy_ioctl_get(struct ieee80211vap *vap, struct ieee80211req *ireq) { return ENOSYS; } IEEE80211_IOCTL_GET(dummy, dummy_ioctl_get); static int ieee80211_ioctl_getdefault(struct ieee80211vap *vap, struct ieee80211req *ireq) { ieee80211_ioctl_getfunc * const *get; int error; SET_FOREACH(get, ieee80211_ioctl_getset) { error = (*get)(vap, ireq); if (error != ENOSYS) return error; } return EINVAL; } /* * When building the kernel with -O2 on the i386 architecture, gcc * seems to want to inline this function into ieee80211_ioctl() * (which is the only routine that calls it). When this happens, * ieee80211_ioctl() ends up consuming an additional 2K of stack * space. (Exactly why it needs so much is unclear.) The problem * is that it's possible for ieee80211_ioctl() to invoke other * routines (including driver init functions) which could then find * themselves perilously close to exhausting the stack. * * To avoid this, we deliberately prevent gcc from inlining this * routine. Another way to avoid this is to use less agressive * optimization when compiling this file (i.e. -O instead of -O2) * but special-casing the compilation of this one module in the * build system would be awkward. */ static __noinline int ieee80211_ioctl_get80211(struct ieee80211vap *vap, u_long cmd, struct ieee80211req *ireq) { #define MS(_v, _f) (((_v) & _f) >> _f##_S) struct ieee80211com *ic = vap->iv_ic; u_int kid, len; uint8_t tmpkey[IEEE80211_KEYBUF_SIZE]; char tmpssid[IEEE80211_NWID_LEN]; int error = 0; switch (ireq->i_type) { case IEEE80211_IOC_SSID: switch (vap->iv_state) { case IEEE80211_S_INIT: case IEEE80211_S_SCAN: ireq->i_len = vap->iv_des_ssid[0].len; memcpy(tmpssid, vap->iv_des_ssid[0].ssid, ireq->i_len); break; default: ireq->i_len = vap->iv_bss->ni_esslen; memcpy(tmpssid, vap->iv_bss->ni_essid, ireq->i_len); break; } error = copyout(tmpssid, ireq->i_data, ireq->i_len); break; case IEEE80211_IOC_NUMSSIDS: ireq->i_val = 1; break; case IEEE80211_IOC_WEP: if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) ireq->i_val = IEEE80211_WEP_OFF; else if (vap->iv_flags & IEEE80211_F_DROPUNENC) ireq->i_val = IEEE80211_WEP_ON; else ireq->i_val = IEEE80211_WEP_MIXED; break; case IEEE80211_IOC_WEPKEY: kid = (u_int) ireq->i_val; if (kid >= IEEE80211_WEP_NKID) return EINVAL; len = (u_int) vap->iv_nw_keys[kid].wk_keylen; /* NB: only root can read WEP keys */ if (priv_check(curthread, PRIV_NET80211_GETKEY) == 0) { bcopy(vap->iv_nw_keys[kid].wk_key, tmpkey, len); } else { bzero(tmpkey, len); } ireq->i_len = len; error = copyout(tmpkey, ireq->i_data, len); break; case IEEE80211_IOC_NUMWEPKEYS: ireq->i_val = IEEE80211_WEP_NKID; break; case IEEE80211_IOC_WEPTXKEY: ireq->i_val = vap->iv_def_txkey; break; case IEEE80211_IOC_AUTHMODE: if (vap->iv_flags & IEEE80211_F_WPA) ireq->i_val = IEEE80211_AUTH_WPA; else ireq->i_val = vap->iv_bss->ni_authmode; break; case IEEE80211_IOC_CHANNEL: ireq->i_val = ieee80211_chan2ieee(ic, ic->ic_curchan); break; case IEEE80211_IOC_POWERSAVE: if (vap->iv_flags & IEEE80211_F_PMGTON) ireq->i_val = IEEE80211_POWERSAVE_ON; else ireq->i_val = IEEE80211_POWERSAVE_OFF; break; case IEEE80211_IOC_POWERSAVESLEEP: ireq->i_val = ic->ic_lintval; break; case IEEE80211_IOC_RTSTHRESHOLD: ireq->i_val = vap->iv_rtsthreshold; break; case IEEE80211_IOC_PROTMODE: ireq->i_val = ic->ic_protmode; break; case IEEE80211_IOC_TXPOWER: /* * Tx power limit is the min of max regulatory * power, any user-set limit, and the max the * radio can do. */ ireq->i_val = 2*ic->ic_curchan->ic_maxregpower; if (ireq->i_val > ic->ic_txpowlimit) ireq->i_val = ic->ic_txpowlimit; if (ireq->i_val > ic->ic_curchan->ic_maxpower) ireq->i_val = ic->ic_curchan->ic_maxpower; break; case IEEE80211_IOC_WPA: switch (vap->iv_flags & IEEE80211_F_WPA) { case IEEE80211_F_WPA1: ireq->i_val = 1; break; case IEEE80211_F_WPA2: ireq->i_val = 2; break; case IEEE80211_F_WPA1 | IEEE80211_F_WPA2: ireq->i_val = 3; break; default: ireq->i_val = 0; break; } break; case IEEE80211_IOC_CHANLIST: error = ieee80211_ioctl_getchanlist(vap, ireq); break; case IEEE80211_IOC_ROAMING: ireq->i_val = vap->iv_roaming; break; case IEEE80211_IOC_PRIVACY: ireq->i_val = (vap->iv_flags & IEEE80211_F_PRIVACY) != 0; break; case IEEE80211_IOC_DROPUNENCRYPTED: ireq->i_val = (vap->iv_flags & IEEE80211_F_DROPUNENC) != 0; break; case IEEE80211_IOC_COUNTERMEASURES: ireq->i_val = (vap->iv_flags & IEEE80211_F_COUNTERM) != 0; break; case IEEE80211_IOC_WME: ireq->i_val = (vap->iv_flags & IEEE80211_F_WME) != 0; break; case IEEE80211_IOC_HIDESSID: ireq->i_val = (vap->iv_flags & IEEE80211_F_HIDESSID) != 0; break; case IEEE80211_IOC_APBRIDGE: ireq->i_val = (vap->iv_flags & IEEE80211_F_NOBRIDGE) == 0; break; case IEEE80211_IOC_WPAKEY: error = ieee80211_ioctl_getkey(vap, ireq); break; case IEEE80211_IOC_CHANINFO: error = ieee80211_ioctl_getchaninfo(vap, ireq); break; case IEEE80211_IOC_BSSID: if (ireq->i_len != IEEE80211_ADDR_LEN) return EINVAL; if (vap->iv_state == IEEE80211_S_RUN) { error = copyout(vap->iv_opmode == IEEE80211_M_WDS ? vap->iv_bss->ni_macaddr : vap->iv_bss->ni_bssid, ireq->i_data, ireq->i_len); } else error = copyout(vap->iv_des_bssid, ireq->i_data, ireq->i_len); break; case IEEE80211_IOC_WPAIE: error = ieee80211_ioctl_getwpaie(vap, ireq, ireq->i_type); break; case IEEE80211_IOC_WPAIE2: error = ieee80211_ioctl_getwpaie(vap, ireq, ireq->i_type); break; case IEEE80211_IOC_SCAN_RESULTS: error = ieee80211_ioctl_getscanresults(vap, ireq); break; case IEEE80211_IOC_STA_STATS: error = ieee80211_ioctl_getstastats(vap, ireq); break; case IEEE80211_IOC_TXPOWMAX: ireq->i_val = vap->iv_bss->ni_txpower; break; case IEEE80211_IOC_STA_TXPOW: error = ieee80211_ioctl_getstatxpow(vap, ireq); break; case IEEE80211_IOC_STA_INFO: error = ieee80211_ioctl_getstainfo(vap, ireq); break; case IEEE80211_IOC_WME_CWMIN: /* WME: CWmin */ case IEEE80211_IOC_WME_CWMAX: /* WME: CWmax */ case IEEE80211_IOC_WME_AIFS: /* WME: AIFS */ case IEEE80211_IOC_WME_TXOPLIMIT: /* WME: txops limit */ case IEEE80211_IOC_WME_ACM: /* WME: ACM (bss only) */ case IEEE80211_IOC_WME_ACKPOLICY: /* WME: ACK policy (bss only) */ error = ieee80211_ioctl_getwmeparam(vap, ireq); break; case IEEE80211_IOC_DTIM_PERIOD: ireq->i_val = vap->iv_dtim_period; break; case IEEE80211_IOC_BEACON_INTERVAL: /* NB: get from ic_bss for station mode */ ireq->i_val = vap->iv_bss->ni_intval; break; case IEEE80211_IOC_PUREG: ireq->i_val = (vap->iv_flags & IEEE80211_F_PUREG) != 0; break; case IEEE80211_IOC_BGSCAN: ireq->i_val = (vap->iv_flags & IEEE80211_F_BGSCAN) != 0; break; case IEEE80211_IOC_BGSCAN_IDLE: ireq->i_val = vap->iv_bgscanidle*hz/1000; /* ms */ break; case IEEE80211_IOC_BGSCAN_INTERVAL: ireq->i_val = vap->iv_bgscanintvl/hz; /* seconds */ break; case IEEE80211_IOC_SCANVALID: ireq->i_val = vap->iv_scanvalid/hz; /* seconds */ break; case IEEE80211_IOC_FRAGTHRESHOLD: ireq->i_val = vap->iv_fragthreshold; break; case IEEE80211_IOC_MACCMD: error = ieee80211_ioctl_getmaccmd(vap, ireq); break; case IEEE80211_IOC_BURST: ireq->i_val = (vap->iv_flags & IEEE80211_F_BURST) != 0; break; case IEEE80211_IOC_BMISSTHRESHOLD: ireq->i_val = vap->iv_bmissthreshold; break; case IEEE80211_IOC_CURCHAN: error = ieee80211_ioctl_getcurchan(vap, ireq); break; case IEEE80211_IOC_SHORTGI: ireq->i_val = 0; if (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI20) ireq->i_val |= IEEE80211_HTCAP_SHORTGI20; if (vap->iv_flags_ext & IEEE80211_FEXT_SHORTGI40) ireq->i_val |= IEEE80211_HTCAP_SHORTGI40; break; case IEEE80211_IOC_AMPDU: ireq->i_val = 0; if (vap->iv_flags_ext & IEEE80211_FEXT_AMPDU_TX) ireq->i_val |= 1; if (vap->iv_flags_ext & IEEE80211_FEXT_AMPDU_RX) ireq->i_val |= 2; break; case IEEE80211_IOC_AMPDU_LIMIT: if (vap->iv_opmode == IEEE80211_M_HOSTAP) ireq->i_val = vap->iv_ampdu_rxmax; else if (vap->iv_state == IEEE80211_S_RUN) ireq->i_val = MS(vap->iv_bss->ni_htparam, IEEE80211_HTCAP_MAXRXAMPDU); else ireq->i_val = vap->iv_ampdu_limit; break; case IEEE80211_IOC_AMPDU_DENSITY: if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) ireq->i_val = MS(vap->iv_bss->ni_htparam, IEEE80211_HTCAP_MPDUDENSITY); else ireq->i_val = vap->iv_ampdu_density; break; case IEEE80211_IOC_AMSDU: ireq->i_val = 0; if (vap->iv_flags_ext & IEEE80211_FEXT_AMSDU_TX) ireq->i_val |= 1; if (vap->iv_flags_ext & IEEE80211_FEXT_AMSDU_RX) ireq->i_val |= 2; break; case IEEE80211_IOC_AMSDU_LIMIT: ireq->i_val = vap->iv_amsdu_limit; /* XXX truncation? */ break; case IEEE80211_IOC_PUREN: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_PUREN) != 0; break; case IEEE80211_IOC_DOTH: ireq->i_val = (vap->iv_flags & IEEE80211_F_DOTH) != 0; break; case IEEE80211_IOC_REGDOMAIN: error = ieee80211_ioctl_getregdomain(vap, ireq); break; case IEEE80211_IOC_ROAM: error = ieee80211_ioctl_getroam(vap, ireq); break; case IEEE80211_IOC_TXPARAMS: error = ieee80211_ioctl_gettxparams(vap, ireq); break; case IEEE80211_IOC_HTCOMPAT: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT) != 0; break; case IEEE80211_IOC_DWDS: ireq->i_val = (vap->iv_flags & IEEE80211_F_DWDS) != 0; break; case IEEE80211_IOC_INACTIVITY: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_INACT) != 0; break; case IEEE80211_IOC_APPIE: error = ieee80211_ioctl_getappie(vap, ireq); break; case IEEE80211_IOC_WPS: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_WPS) != 0; break; case IEEE80211_IOC_TSN: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_TSN) != 0; break; case IEEE80211_IOC_DFS: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_DFS) != 0; break; case IEEE80211_IOC_DOTD: ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_DOTD) != 0; break; case IEEE80211_IOC_DEVCAPS: error = ieee80211_ioctl_getdevcaps(ic, ireq); break; case IEEE80211_IOC_HTPROTMODE: ireq->i_val = ic->ic_htprotmode; break; case IEEE80211_IOC_HTCONF: if (vap->iv_flags_ext & IEEE80211_FEXT_HT) { ireq->i_val = 1; if (vap->iv_flags_ext & IEEE80211_FEXT_USEHT40) ireq->i_val |= 2; } else ireq->i_val = 0; break; case IEEE80211_IOC_STA_VLAN: error = ieee80211_ioctl_getstavlan(vap, ireq); break; case IEEE80211_IOC_SMPS: if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) { if (vap->iv_bss->ni_flags & IEEE80211_NODE_MIMO_RTS) ireq->i_val = IEEE80211_HTCAP_SMPS_DYNAMIC; else if (vap->iv_bss->ni_flags & IEEE80211_NODE_MIMO_PS) ireq->i_val = IEEE80211_HTCAP_SMPS_ENA; else ireq->i_val = IEEE80211_HTCAP_SMPS_OFF; } else ireq->i_val = vap->iv_htcaps & IEEE80211_HTCAP_SMPS; break; case IEEE80211_IOC_RIFS: if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) ireq->i_val = (vap->iv_bss->ni_flags & IEEE80211_NODE_RIFS) != 0; else ireq->i_val = (vap->iv_flags_ext & IEEE80211_FEXT_RIFS) != 0; break; default: error = ieee80211_ioctl_getdefault(vap, ireq); break; } return error; #undef MS } static __noinline int ieee80211_ioctl_setkey(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211req_key ik; struct ieee80211_node *ni; struct ieee80211_key *wk; uint16_t kid; int error, i; if (ireq->i_len != sizeof(ik)) return EINVAL; error = copyin(ireq->i_data, &ik, sizeof(ik)); if (error) return error; /* NB: cipher support is verified by ieee80211_crypt_newkey */ /* NB: this also checks ik->ik_keylen > sizeof(wk->wk_key) */ if (ik.ik_keylen > sizeof(ik.ik_keydata)) return E2BIG; kid = ik.ik_keyix; if (kid == IEEE80211_KEYIX_NONE) { /* XXX unicast keys currently must be tx/rx */ if (ik.ik_flags != (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV)) return EINVAL; if (vap->iv_opmode == IEEE80211_M_STA) { ni = ieee80211_ref_node(vap->iv_bss); if (!IEEE80211_ADDR_EQ(ik.ik_macaddr, ni->ni_bssid)) { ieee80211_free_node(ni); return EADDRNOTAVAIL; } } else { ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, ik.ik_macaddr); if (ni == NULL) return ENOENT; } wk = &ni->ni_ucastkey; } else { if (kid >= IEEE80211_WEP_NKID) return EINVAL; wk = &vap->iv_nw_keys[kid]; /* * Global slots start off w/o any assigned key index. * Force one here for consistency with IEEE80211_IOC_WEPKEY. */ if (wk->wk_keyix == IEEE80211_KEYIX_NONE) wk->wk_keyix = kid; ni = NULL; } error = 0; ieee80211_key_update_begin(vap); if (ieee80211_crypto_newkey(vap, ik.ik_type, ik.ik_flags, wk)) { wk->wk_keylen = ik.ik_keylen; /* NB: MIC presence is implied by cipher type */ if (wk->wk_keylen > IEEE80211_KEYBUF_SIZE) wk->wk_keylen = IEEE80211_KEYBUF_SIZE; for (i = 0; i < IEEE80211_TID_SIZE; i++) wk->wk_keyrsc[i] = ik.ik_keyrsc; wk->wk_keytsc = 0; /* new key, reset */ memset(wk->wk_key, 0, sizeof(wk->wk_key)); memcpy(wk->wk_key, ik.ik_keydata, ik.ik_keylen); IEEE80211_ADDR_COPY(wk->wk_macaddr, ni != NULL ? ni->ni_macaddr : ik.ik_macaddr); if (!ieee80211_crypto_setkey(vap, wk)) error = EIO; else if ((ik.ik_flags & IEEE80211_KEY_DEFAULT)) vap->iv_def_txkey = kid; } else error = ENXIO; ieee80211_key_update_end(vap); if (ni != NULL) ieee80211_free_node(ni); return error; } static __noinline int ieee80211_ioctl_delkey(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211req_del_key dk; int kid, error; if (ireq->i_len != sizeof(dk)) return EINVAL; error = copyin(ireq->i_data, &dk, sizeof(dk)); if (error) return error; kid = dk.idk_keyix; /* XXX uint8_t -> uint16_t */ if (dk.idk_keyix == (uint8_t) IEEE80211_KEYIX_NONE) { struct ieee80211_node *ni; if (vap->iv_opmode == IEEE80211_M_STA) { ni = ieee80211_ref_node(vap->iv_bss); if (!IEEE80211_ADDR_EQ(dk.idk_macaddr, ni->ni_bssid)) { ieee80211_free_node(ni); return EADDRNOTAVAIL; } } else { ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, dk.idk_macaddr); if (ni == NULL) return ENOENT; } /* XXX error return */ ieee80211_node_delucastkey(ni); ieee80211_free_node(ni); } else { if (kid >= IEEE80211_WEP_NKID) return EINVAL; /* XXX error return */ ieee80211_crypto_delkey(vap, &vap->iv_nw_keys[kid]); } return 0; } struct mlmeop { struct ieee80211vap *vap; int op; int reason; }; static void mlmedebug(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], int op, int reason) { #ifdef IEEE80211_DEBUG static const struct { int mask; const char *opstr; } ops[] = { { 0, "op#0" }, { IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_ASSOC, "assoc" }, { IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_ASSOC, "disassoc" }, { IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_AUTH, "deauth" }, { IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_AUTH, "authorize" }, { IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_AUTH, "unauthorize" }, }; if (op == IEEE80211_MLME_AUTH) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_IOCTL | IEEE80211_MSG_STATE | IEEE80211_MSG_AUTH, mac, "station authenticate %s via MLME (reason %d)", reason == IEEE80211_STATUS_SUCCESS ? "ACCEPT" : "REJECT", reason); } else if (!(IEEE80211_MLME_ASSOC <= op && op <= IEEE80211_MLME_AUTH)) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ANY, mac, "unknown MLME request %d (reason %d)", op, reason); } else if (reason == IEEE80211_STATUS_SUCCESS) { IEEE80211_NOTE_MAC(vap, ops[op].mask, mac, "station %s via MLME", ops[op].opstr); } else { IEEE80211_NOTE_MAC(vap, ops[op].mask, mac, "station %s via MLME (reason %d)", ops[op].opstr, reason); } #endif /* IEEE80211_DEBUG */ } static void domlme(void *arg, struct ieee80211_node *ni) { struct mlmeop *mop = arg; struct ieee80211vap *vap = ni->ni_vap; if (vap != mop->vap) return; /* * NB: if ni_associd is zero then the node is already cleaned * up and we don't need to do this (we're safely holding a * reference but should otherwise not modify it's state). */ if (ni->ni_associd == 0) return; mlmedebug(vap, ni->ni_macaddr, mop->op, mop->reason); if (mop->op == IEEE80211_MLME_DEAUTH) { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, mop->reason); } else { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DISASSOC, mop->reason); } ieee80211_node_leave(ni); } static int setmlme_dropsta(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], struct mlmeop *mlmeop) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *ni; int error = 0; /* NB: the broadcast address means do 'em all */ if (!IEEE80211_ADDR_EQ(mac, ic->ic_ifp->if_broadcastaddr)) { IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_node_locked(nt, mac); if (ni != NULL) { domlme(mlmeop, ni); ieee80211_free_node(ni); } else error = ENOENT; IEEE80211_NODE_UNLOCK(nt); } else { ieee80211_iterate_nodes(nt, domlme, mlmeop); } return error; } static __noinline int setmlme_common(struct ieee80211vap *vap, int op, const uint8_t mac[IEEE80211_ADDR_LEN], int reason) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *ni; struct mlmeop mlmeop; int error; error = 0; switch (op) { case IEEE80211_MLME_DISASSOC: case IEEE80211_MLME_DEAUTH: switch (vap->iv_opmode) { case IEEE80211_M_STA: mlmedebug(vap, vap->iv_bss->ni_macaddr, op, reason); /* XXX not quite right */ ieee80211_new_state(vap, IEEE80211_S_INIT, reason); break; case IEEE80211_M_HOSTAP: mlmeop.vap = vap; mlmeop.op = op; mlmeop.reason = reason; error = setmlme_dropsta(vap, mac, &mlmeop); break; case IEEE80211_M_WDS: /* XXX user app should send raw frame? */ if (op != IEEE80211_MLME_DEAUTH) { error = EINVAL; break; } #if 0 /* XXX accept any address, simplifies user code */ if (!IEEE80211_ADDR_EQ(mac, vap->iv_bss->ni_macaddr)) { error = EINVAL; break; } #endif mlmedebug(vap, vap->iv_bss->ni_macaddr, op, reason); ni = ieee80211_ref_node(vap->iv_bss); IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason); ieee80211_free_node(ni); break; default: error = EINVAL; break; } break; case IEEE80211_MLME_AUTHORIZE: case IEEE80211_MLME_UNAUTHORIZE: if (vap->iv_opmode != IEEE80211_M_HOSTAP && vap->iv_opmode != IEEE80211_M_WDS) { error = EINVAL; break; } IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_vap_node_locked(nt, vap, mac); if (ni != NULL) { mlmedebug(vap, mac, op, reason); if (op == IEEE80211_MLME_AUTHORIZE) ieee80211_node_authorize(ni); else ieee80211_node_unauthorize(ni); ieee80211_free_node(ni); } else error = ENOENT; IEEE80211_NODE_UNLOCK(nt); break; case IEEE80211_MLME_AUTH: if (vap->iv_opmode != IEEE80211_M_HOSTAP) { error = EINVAL; break; } IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_vap_node_locked(nt, vap, mac); if (ni != NULL) { mlmedebug(vap, mac, op, reason); if (reason == IEEE80211_STATUS_SUCCESS) { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 2); /* * For shared key auth, just continue the * exchange. Otherwise when 802.1x is not in * use mark the port authorized at this point * so traffic can flow. */ if (ni->ni_authmode != IEEE80211_AUTH_8021X && ni->ni_challenge == NULL) ieee80211_node_authorize(ni); } else { vap->iv_stats.is_rx_acl++; ieee80211_send_error(ni, ni->ni_macaddr, IEEE80211_FC0_SUBTYPE_AUTH, 2|(reason<<16)); ieee80211_node_leave(ni); } ieee80211_free_node(ni); } else error = ENOENT; IEEE80211_NODE_UNLOCK(nt); break; default: error = EINVAL; break; } return error; } struct scanlookup { const uint8_t *mac; int esslen; const uint8_t *essid; const struct ieee80211_scan_entry *se; }; /* * Match mac address and any ssid. */ static void mlmelookup(void *arg, const struct ieee80211_scan_entry *se) { struct scanlookup *look = arg; if (!IEEE80211_ADDR_EQ(look->mac, se->se_macaddr)) return; if (look->esslen != 0) { if (se->se_ssid[1] != look->esslen) return; if (memcmp(look->essid, se->se_ssid+2, look->esslen)) return; } look->se = se; } static __noinline int setmlme_assoc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], int ssid_len, const uint8_t ssid[IEEE80211_NWID_LEN]) { struct scanlookup lookup; /* XXX ibss/ahdemo */ if (vap->iv_opmode != IEEE80211_M_STA) return EINVAL; /* NB: this is racey if roaming is !manual */ lookup.se = NULL; lookup.mac = mac; lookup.esslen = ssid_len; lookup.essid = ssid; ieee80211_scan_iterate(vap, mlmelookup, &lookup); if (lookup.se == NULL) return ENOENT; mlmedebug(vap, mac, IEEE80211_MLME_ASSOC, 0); if (!ieee80211_sta_join(vap, lookup.se->se_chan, lookup.se)) return EIO; /* XXX unique but could be better */ return 0; } static __noinline int ieee80211_ioctl_setmlme(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211req_mlme mlme; int error; if (ireq->i_len != sizeof(mlme)) return EINVAL; error = copyin(ireq->i_data, &mlme, sizeof(mlme)); if (error) return error; if (mlme.im_op == IEEE80211_MLME_ASSOC) return setmlme_assoc(vap, mlme.im_macaddr, vap->iv_des_ssid[0].len, vap->iv_des_ssid[0].ssid); else return setmlme_common(vap, mlme.im_op, mlme.im_macaddr, mlme.im_reason); } static __noinline int ieee80211_ioctl_macmac(struct ieee80211vap *vap, struct ieee80211req *ireq) { uint8_t mac[IEEE80211_ADDR_LEN]; const struct ieee80211_aclator *acl = vap->iv_acl; int error; if (ireq->i_len != sizeof(mac)) return EINVAL; error = copyin(ireq->i_data, mac, ireq->i_len); if (error) return error; if (acl == NULL) { acl = ieee80211_aclator_get("mac"); if (acl == NULL || !acl->iac_attach(vap)) return EINVAL; vap->iv_acl = acl; } if (ireq->i_type == IEEE80211_IOC_ADDMAC) acl->iac_add(vap, mac); else acl->iac_remove(vap, mac); return 0; } static __noinline int ieee80211_ioctl_setmaccmd(struct ieee80211vap *vap, struct ieee80211req *ireq) { const struct ieee80211_aclator *acl = vap->iv_acl; switch (ireq->i_val) { case IEEE80211_MACCMD_POLICY_OPEN: case IEEE80211_MACCMD_POLICY_ALLOW: case IEEE80211_MACCMD_POLICY_DENY: case IEEE80211_MACCMD_POLICY_RADIUS: if (acl == NULL) { acl = ieee80211_aclator_get("mac"); if (acl == NULL || !acl->iac_attach(vap)) return EINVAL; vap->iv_acl = acl; } acl->iac_setpolicy(vap, ireq->i_val); break; case IEEE80211_MACCMD_FLUSH: if (acl != NULL) acl->iac_flush(vap); /* NB: silently ignore when not in use */ break; case IEEE80211_MACCMD_DETACH: if (acl != NULL) { vap->iv_acl = NULL; acl->iac_detach(vap); } break; default: if (acl == NULL) return EINVAL; else return acl->iac_setioctl(vap, ireq); } return 0; } static __noinline int ieee80211_ioctl_setchanlist(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; uint8_t *chanlist, *list; int i, nchan, maxchan, error; if (ireq->i_len > sizeof(ic->ic_chan_active)) ireq->i_len = sizeof(ic->ic_chan_active); list = malloc(ireq->i_len + IEEE80211_CHAN_BYTES, M_TEMP, M_NOWAIT | M_ZERO); if (list == NULL) return ENOMEM; error = copyin(ireq->i_data, list, ireq->i_len); if (error) return error; nchan = 0; chanlist = list + ireq->i_len; /* NB: zero'd already */ maxchan = ireq->i_len * NBBY; for (i = 0; i < ic->ic_nchans; i++) { const struct ieee80211_channel *c = &ic->ic_channels[i]; /* * Calculate the intersection of the user list and the * available channels so users can do things like specify * 1-255 to get all available channels. */ if (c->ic_ieee < maxchan && isset(list, c->ic_ieee)) { setbit(chanlist, c->ic_ieee); nchan++; } } if (nchan == 0) return EINVAL; if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && /* XXX */ isclr(chanlist, ic->ic_bsschan->ic_ieee)) ic->ic_bsschan = IEEE80211_CHAN_ANYC; memcpy(ic->ic_chan_active, chanlist, IEEE80211_CHAN_BYTES); ieee80211_scan_flush(vap); free(list, M_TEMP); return ENETRESET; } static __noinline int ieee80211_ioctl_setstastats(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; uint8_t macaddr[IEEE80211_ADDR_LEN]; int error; /* * NB: we could copyin ieee80211req_sta_stats so apps * could make selective changes but that's overkill; * just clear all stats for now. */ if (ireq->i_len < IEEE80211_ADDR_LEN) return EINVAL; error = copyin(ireq->i_data, macaddr, IEEE80211_ADDR_LEN); if (error != 0) return error; ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, macaddr); if (ni == NULL) return ENOENT; /* XXX require ni_vap == vap? */ memset(&ni->ni_stats, 0, sizeof(ni->ni_stats)); ieee80211_free_node(ni); return 0; } static __noinline int ieee80211_ioctl_setstatxpow(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; struct ieee80211req_sta_txpow txpow; int error; if (ireq->i_len != sizeof(txpow)) return EINVAL; error = copyin(ireq->i_data, &txpow, sizeof(txpow)); if (error != 0) return error; ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, txpow.it_macaddr); if (ni == NULL) return ENOENT; ni->ni_txpower = txpow.it_txpow; ieee80211_free_node(ni); return error; } static __noinline int ieee80211_ioctl_setwmeparam(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_wme_state *wme = &ic->ic_wme; struct wmeParams *wmep, *chanp; int isbss, ac; if ((ic->ic_caps & IEEE80211_C_WME) == 0) return EOPNOTSUPP; isbss = (ireq->i_len & IEEE80211_WMEPARAM_BSS); ac = (ireq->i_len & IEEE80211_WMEPARAM_VAL); if (ac >= WME_NUM_AC) ac = WME_AC_BE; if (isbss) { chanp = &wme->wme_bssChanParams.cap_wmeParams[ac]; wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[ac]; } else { chanp = &wme->wme_chanParams.cap_wmeParams[ac]; wmep = &wme->wme_wmeChanParams.cap_wmeParams[ac]; } switch (ireq->i_type) { case IEEE80211_IOC_WME_CWMIN: /* WME: CWmin */ if (isbss) { wmep->wmep_logcwmin = ireq->i_val; if ((wme->wme_flags & WME_F_AGGRMODE) == 0) chanp->wmep_logcwmin = ireq->i_val; } else { wmep->wmep_logcwmin = chanp->wmep_logcwmin = ireq->i_val; } break; case IEEE80211_IOC_WME_CWMAX: /* WME: CWmax */ if (isbss) { wmep->wmep_logcwmax = ireq->i_val; if ((wme->wme_flags & WME_F_AGGRMODE) == 0) chanp->wmep_logcwmax = ireq->i_val; } else { wmep->wmep_logcwmax = chanp->wmep_logcwmax = ireq->i_val; } break; case IEEE80211_IOC_WME_AIFS: /* WME: AIFS */ if (isbss) { wmep->wmep_aifsn = ireq->i_val; if ((wme->wme_flags & WME_F_AGGRMODE) == 0) chanp->wmep_aifsn = ireq->i_val; } else { wmep->wmep_aifsn = chanp->wmep_aifsn = ireq->i_val; } break; case IEEE80211_IOC_WME_TXOPLIMIT: /* WME: txops limit */ if (isbss) { wmep->wmep_txopLimit = ireq->i_val; if ((wme->wme_flags & WME_F_AGGRMODE) == 0) chanp->wmep_txopLimit = ireq->i_val; } else { wmep->wmep_txopLimit = chanp->wmep_txopLimit = ireq->i_val; } break; case IEEE80211_IOC_WME_ACM: /* WME: ACM (bss only) */ wmep->wmep_acm = ireq->i_val; if ((wme->wme_flags & WME_F_AGGRMODE) == 0) chanp->wmep_acm = ireq->i_val; break; case IEEE80211_IOC_WME_ACKPOLICY: /* WME: ACK policy (!bss only)*/ wmep->wmep_noackPolicy = chanp->wmep_noackPolicy = (ireq->i_val) == 0; break; } ieee80211_wme_updateparams(vap); return 0; } static int find11gchannel(struct ieee80211com *ic, int start, int freq) { const struct ieee80211_channel *c; int i; for (i = start+1; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (c->ic_freq == freq && IEEE80211_IS_CHAN_ANYG(c)) return 1; } /* NB: should not be needed but in case things are mis-sorted */ for (i = 0; i < start; i++) { c = &ic->ic_channels[i]; if (c->ic_freq == freq && IEEE80211_IS_CHAN_ANYG(c)) return 1; } return 0; } static struct ieee80211_channel * findchannel(struct ieee80211com *ic, int ieee, int mode) { static const u_int chanflags[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = 0, [IEEE80211_MODE_11A] = IEEE80211_CHAN_A, [IEEE80211_MODE_11B] = IEEE80211_CHAN_B, [IEEE80211_MODE_11G] = IEEE80211_CHAN_G, [IEEE80211_MODE_FH] = IEEE80211_CHAN_FHSS, [IEEE80211_MODE_TURBO_A] = IEEE80211_CHAN_108A, [IEEE80211_MODE_TURBO_G] = IEEE80211_CHAN_108G, [IEEE80211_MODE_STURBO_A] = IEEE80211_CHAN_STURBO, [IEEE80211_MODE_HALF] = IEEE80211_CHAN_HALF, [IEEE80211_MODE_QUARTER] = IEEE80211_CHAN_QUARTER, /* NB: handled specially below */ [IEEE80211_MODE_11NA] = IEEE80211_CHAN_A, [IEEE80211_MODE_11NG] = IEEE80211_CHAN_G, }; u_int modeflags; int i; modeflags = chanflags[mode]; for (i = 0; i < ic->ic_nchans; i++) { struct ieee80211_channel *c = &ic->ic_channels[i]; if (c->ic_ieee != ieee) continue; if (mode == IEEE80211_MODE_AUTO) { /* ignore turbo channels for autoselect */ if (IEEE80211_IS_CHAN_TURBO(c)) continue; /* * XXX special-case 11b/g channels so we * always select the g channel if both * are present. * XXX prefer HT to non-HT? */ if (!IEEE80211_IS_CHAN_B(c) || !find11gchannel(ic, i, c->ic_freq)) return c; } else { /* must check HT specially */ if ((mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG) && !IEEE80211_IS_CHAN_HT(c)) continue; if ((c->ic_flags & modeflags) == modeflags) return c; } } return NULL; } /* * Check the specified against any desired mode (aka netband). * This is only used (presently) when operating in hostap mode * to enforce consistency. */ static int check_mode_consistency(const struct ieee80211_channel *c, int mode) { KASSERT(c != IEEE80211_CHAN_ANYC, ("oops, no channel")); switch (mode) { case IEEE80211_MODE_11B: return (IEEE80211_IS_CHAN_B(c)); case IEEE80211_MODE_11G: return (IEEE80211_IS_CHAN_ANYG(c) && !IEEE80211_IS_CHAN_HT(c)); case IEEE80211_MODE_11A: return (IEEE80211_IS_CHAN_A(c) && !IEEE80211_IS_CHAN_HT(c)); case IEEE80211_MODE_STURBO_A: return (IEEE80211_IS_CHAN_STURBO(c)); case IEEE80211_MODE_11NA: return (IEEE80211_IS_CHAN_HTA(c)); case IEEE80211_MODE_11NG: return (IEEE80211_IS_CHAN_HTG(c)); } return 1; } /* * Common code to set the current channel. If the device * is up and running this may result in an immediate channel * change or a kick of the state machine. */ static int setcurchan(struct ieee80211vap *vap, struct ieee80211_channel *c) { struct ieee80211com *ic = vap->iv_ic; int error; if (c != IEEE80211_CHAN_ANYC) { if (IEEE80211_IS_CHAN_RADAR(c)) return EBUSY; /* XXX better code? */ if (vap->iv_opmode == IEEE80211_M_HOSTAP) { if (IEEE80211_IS_CHAN_NOHOSTAP(c)) return EINVAL; if (!check_mode_consistency(c, vap->iv_des_mode)) return EINVAL; } else if (vap->iv_opmode == IEEE80211_M_IBSS) { if (IEEE80211_IS_CHAN_NOADHOC(c)) return EINVAL; } if (vap->iv_state == IEEE80211_S_RUN && vap->iv_bss->ni_chan == c) return 0; /* NB: nothing to do */ } vap->iv_des_chan = c; error = 0; if (vap->iv_opmode == IEEE80211_M_MONITOR && vap->iv_des_chan != IEEE80211_CHAN_ANYC) { /* * Monitor mode can switch directly. */ if (IFNET_IS_UP_RUNNING(vap->iv_ifp)) { /* XXX need state machine for other vap's to follow */ ieee80211_setcurchan(ic, vap->iv_des_chan); vap->iv_bss->ni_chan = ic->ic_curchan; } else ic->ic_curchan = vap->iv_des_chan; ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); } else { /* * Need to go through the state machine in case we * need to reassociate or the like. The state machine * will pickup the desired channel and avoid scanning. */ if (IS_UP_AUTO(vap)) ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); else if (vap->iv_des_chan != IEEE80211_CHAN_ANYC) { /* * When not up+running and a real channel has * been specified fix the current channel so * there is immediate feedback; e.g. via ifconfig. */ ic->ic_curchan = vap->iv_des_chan; ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); } } return error; } /* * Old api for setting the current channel; this is * deprecated because channel numbers are ambiguous. */ static __noinline int ieee80211_ioctl_setchannel(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_channel *c; /* XXX 0xffff overflows 16-bit signed */ if (ireq->i_val == 0 || ireq->i_val == (int16_t) IEEE80211_CHAN_ANY) { c = IEEE80211_CHAN_ANYC; } else { struct ieee80211_channel *c2; c = findchannel(ic, ireq->i_val, vap->iv_des_mode); if (c == NULL) { c = findchannel(ic, ireq->i_val, IEEE80211_MODE_AUTO); if (c == NULL) return EINVAL; } /* * Fine tune channel selection based on desired mode: * if 11b is requested, find the 11b version of any * 11g channel returned, * if static turbo, find the turbo version of any * 11a channel return, * if 11na is requested, find the ht version of any * 11a channel returned, * if 11ng is requested, find the ht version of any * 11g channel returned, * otherwise we should be ok with what we've got. */ switch (vap->iv_des_mode) { case IEEE80211_MODE_11B: if (IEEE80211_IS_CHAN_ANYG(c)) { c2 = findchannel(ic, ireq->i_val, IEEE80211_MODE_11B); /* NB: should not happen, =>'s 11g w/o 11b */ if (c2 != NULL) c = c2; } break; case IEEE80211_MODE_TURBO_A: if (IEEE80211_IS_CHAN_A(c)) { c2 = findchannel(ic, ireq->i_val, IEEE80211_MODE_TURBO_A); if (c2 != NULL) c = c2; } break; case IEEE80211_MODE_11NA: if (IEEE80211_IS_CHAN_A(c)) { c2 = findchannel(ic, ireq->i_val, IEEE80211_MODE_11NA); if (c2 != NULL) c = c2; } break; case IEEE80211_MODE_11NG: if (IEEE80211_IS_CHAN_ANYG(c)) { c2 = findchannel(ic, ireq->i_val, IEEE80211_MODE_11NG); if (c2 != NULL) c = c2; } break; default: /* NB: no static turboG */ break; } } return setcurchan(vap, c); } /* * New/current api for setting the current channel; a complete * channel description is provide so there is no ambiguity in * identifying the channel. */ static __noinline int ieee80211_ioctl_setcurchan(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_channel chan, *c; int error; if (ireq->i_len != sizeof(chan)) return EINVAL; error = copyin(ireq->i_data, &chan, sizeof(chan)); if (error != 0) return error; /* XXX 0xffff overflows 16-bit signed */ if (chan.ic_freq == 0 || chan.ic_freq == IEEE80211_CHAN_ANY) { c = IEEE80211_CHAN_ANYC; } else { c = ieee80211_find_channel(ic, chan.ic_freq, chan.ic_flags); if (c == NULL) return EINVAL; } return setcurchan(vap, c); } static __noinline int ieee80211_ioctl_setregdomain(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211_regdomain_req *reg; int nchans, error; nchans = 1 + ((ireq->i_len - sizeof(struct ieee80211_regdomain_req)) / sizeof(struct ieee80211_channel)); if (!(1 <= nchans && nchans <= IEEE80211_CHAN_MAX)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: bad # chans, i_len %d nchans %d\n", __func__, ireq->i_len, nchans); return EINVAL; } reg = (struct ieee80211_regdomain_req *) malloc(IEEE80211_REGDOMAIN_SIZE(nchans), M_TEMP, M_NOWAIT); if (reg == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: no memory, nchans %d\n", __func__, nchans); return ENOMEM; } error = copyin(ireq->i_data, reg, IEEE80211_REGDOMAIN_SIZE(nchans)); if (error == 0) { /* NB: validate inline channel count against storage size */ if (reg->chaninfo.ic_nchans != nchans) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: chan cnt mismatch, %d != %d\n", __func__, reg->chaninfo.ic_nchans, nchans); error = EINVAL; } else error = ieee80211_setregdomain(vap, reg); } free(reg, M_TEMP); return (error == 0 ? ENETRESET : error); } static int ieee80211_ioctl_setroam(struct ieee80211vap *vap, const struct ieee80211req *ireq) { if (ireq->i_len != sizeof(vap->iv_roamparms)) return EINVAL; /* XXX validate params */ /* XXX? ENETRESET to push to device? */ return copyin(ireq->i_data, vap->iv_roamparms, sizeof(vap->iv_roamparms)); } static int checkrate(const struct ieee80211_rateset *rs, int rate) { int i; if (rate == IEEE80211_FIXED_RATE_NONE) return 1; for (i = 0; i < rs->rs_nrates; i++) if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == rate) return 1; return 0; } static int checkmcs(int mcs) { if (mcs == IEEE80211_FIXED_RATE_NONE) return 1; if ((mcs & IEEE80211_RATE_MCS) == 0) /* MCS always have 0x80 set */ return 0; return (mcs & 0x7f) <= 15; /* XXX could search ht rate set */ } static __noinline int ieee80211_ioctl_settxparams(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_txparams_req parms; /* XXX stack use? */ struct ieee80211_txparam *src, *dst; const struct ieee80211_rateset *rs; int error, mode, changed, is11n, nmodes; /* NB: accept short requests for backwards compat */ if (ireq->i_len > sizeof(parms)) return EINVAL; error = copyin(ireq->i_data, &parms, ireq->i_len); if (error != 0) return error; nmodes = ireq->i_len / sizeof(struct ieee80211_txparam); changed = 0; /* validate parameters and check if anything changed */ for (mode = IEEE80211_MODE_11A; mode < nmodes; mode++) { if (isclr(ic->ic_modecaps, mode)) continue; src = &parms.params[mode]; dst = &vap->iv_txparms[mode]; rs = &ic->ic_sup_rates[mode]; /* NB: 11n maps to legacy */ is11n = (mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG); if (src->ucastrate != dst->ucastrate) { if (!checkrate(rs, src->ucastrate) && (!is11n || !checkmcs(src->ucastrate))) return EINVAL; changed++; } if (src->mcastrate != dst->mcastrate) { if (!checkrate(rs, src->mcastrate) && (!is11n || !checkmcs(src->mcastrate))) return EINVAL; changed++; } if (src->mgmtrate != dst->mgmtrate) { if (!checkrate(rs, src->mgmtrate) && (!is11n || !checkmcs(src->mgmtrate))) return EINVAL; changed++; } if (src->maxretry != dst->maxretry) /* NB: no bounds */ changed++; } if (changed) { /* * Copy new parameters in place and notify the * driver so it can push state to the device. */ for (mode = IEEE80211_MODE_11A; mode < nmodes; mode++) { if (isset(ic->ic_modecaps, mode)) vap->iv_txparms[mode] = parms.params[mode]; } /* XXX could be more intelligent, e.g. don't reset if setting not being used */ return ENETRESET; } return 0; } /* * Application Information Element support. */ static int setappie(struct ieee80211_appie **aie, const struct ieee80211req *ireq) { struct ieee80211_appie *app = *aie; struct ieee80211_appie *napp; int error; if (ireq->i_len == 0) { /* delete any existing ie */ if (app != NULL) { *aie = NULL; /* XXX racey */ free(app, M_80211_NODE_IE); } return 0; } if (!(2 <= ireq->i_len && ireq->i_len <= IEEE80211_MAX_APPIE)) return EINVAL; /* * Allocate a new appie structure and copy in the user data. * When done swap in the new structure. Note that we do not * guard against users holding a ref to the old structure; * this must be handled outside this code. * * XXX bad bad bad */ napp = (struct ieee80211_appie *) malloc( sizeof(struct ieee80211_appie) + ireq->i_len, M_80211_NODE_IE, M_NOWAIT); if (napp == NULL) return ENOMEM; /* XXX holding ic lock */ error = copyin(ireq->i_data, napp->ie_data, ireq->i_len); if (error) { free(napp, M_80211_NODE_IE); return error; } napp->ie_len = ireq->i_len; *aie = napp; if (app != NULL) free(app, M_80211_NODE_IE); return 0; } static void setwparsnie(struct ieee80211vap *vap, uint8_t *ie, int space) { /* validate data is present as best we can */ if (space == 0 || 2+ie[1] > space) return; if (ie[0] == IEEE80211_ELEMID_VENDOR) vap->iv_wpa_ie = ie; else if (ie[0] == IEEE80211_ELEMID_RSN) vap->iv_rsn_ie = ie; } static __noinline int ieee80211_ioctl_setappie_locked(struct ieee80211vap *vap, const struct ieee80211req *ireq, int fc0) { int error; IEEE80211_LOCK_ASSERT(vap->iv_ic); switch (fc0 & IEEE80211_FC0_SUBTYPE_MASK) { case IEEE80211_FC0_SUBTYPE_BEACON: if (vap->iv_opmode != IEEE80211_M_HOSTAP && vap->iv_opmode != IEEE80211_M_IBSS) { error = EINVAL; break; } error = setappie(&vap->iv_appie_beacon, ireq); if (error == 0) ieee80211_beacon_notify(vap, IEEE80211_BEACON_APPIE); break; case IEEE80211_FC0_SUBTYPE_PROBE_RESP: error = setappie(&vap->iv_appie_proberesp, ireq); break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: if (vap->iv_opmode == IEEE80211_M_HOSTAP) error = setappie(&vap->iv_appie_assocresp, ireq); else error = EINVAL; break; case IEEE80211_FC0_SUBTYPE_PROBE_REQ: error = setappie(&vap->iv_appie_probereq, ireq); break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: if (vap->iv_opmode == IEEE80211_M_STA) error = setappie(&vap->iv_appie_assocreq, ireq); else error = EINVAL; break; case (IEEE80211_APPIE_WPA & IEEE80211_FC0_SUBTYPE_MASK): error = setappie(&vap->iv_appie_wpa, ireq); if (error == 0) { /* * Must split single blob of data into separate * WPA and RSN ie's because they go in different * locations in the mgt frames. * XXX use IEEE80211_IOC_WPA2 so user code does split */ vap->iv_wpa_ie = NULL; vap->iv_rsn_ie = NULL; if (vap->iv_appie_wpa != NULL) { struct ieee80211_appie *appie = vap->iv_appie_wpa; uint8_t *data = appie->ie_data; /* XXX ie length validate is painful, cheat */ setwparsnie(vap, data, appie->ie_len); setwparsnie(vap, data + 2 + data[1], appie->ie_len - (2 + data[1])); } if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_IBSS) { /* * Must rebuild beacon frame as the update * mechanism doesn't handle WPA/RSN ie's. * Could extend it but it doesn't normally * change; this is just to deal with hostapd * plumbing the ie after the interface is up. */ error = ENETRESET; } } break; default: error = EINVAL; break; } return error; } static __noinline int ieee80211_ioctl_setappie(struct ieee80211vap *vap, const struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; int error; uint8_t fc0; fc0 = ireq->i_val & 0xff; if ((fc0 & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_MGT) return EINVAL; /* NB: could check iv_opmode and reject but hardly worth the effort */ IEEE80211_LOCK(ic); error = ieee80211_ioctl_setappie_locked(vap, ireq, fc0); IEEE80211_UNLOCK(ic); return error; } static __noinline int ieee80211_ioctl_chanswitch(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_chanswitch_req csr; struct ieee80211_channel *c; int error; if (ireq->i_len != sizeof(csr)) return EINVAL; error = copyin(ireq->i_data, &csr, sizeof(csr)); if (error != 0) return error; if ((vap->iv_flags & IEEE80211_F_DOTH) == 0) return EINVAL; c = ieee80211_find_channel(ic, csr.csa_chan.ic_freq, csr.csa_chan.ic_flags); if (c == NULL) return ENOENT; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) ieee80211_csa_startswitch(ic, c, csr.csa_mode, csr.csa_count); else error = EBUSY; IEEE80211_UNLOCK(ic); return error; } static __noinline int ieee80211_ioctl_scanreq(struct ieee80211vap *vap, struct ieee80211req *ireq) { #define IEEE80211_IOC_SCAN_FLAGS \ (IEEE80211_IOC_SCAN_NOPICK | IEEE80211_IOC_SCAN_ACTIVE | \ IEEE80211_IOC_SCAN_PICK1ST | IEEE80211_IOC_SCAN_BGSCAN | \ IEEE80211_IOC_SCAN_ONCE | IEEE80211_IOC_SCAN_NOBCAST | \ IEEE80211_IOC_SCAN_NOJOIN | IEEE80211_IOC_SCAN_FLUSH | \ IEEE80211_IOC_SCAN_CHECK) struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_req sr; /* XXX off stack? */ int error, i; /* NB: parent must be running */ if ((ic->ic_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) return ENXIO; if (ireq->i_len != sizeof(sr)) return EINVAL; error = copyin(ireq->i_data, &sr, sizeof(sr)); if (error != 0) return error; /* convert duration */ if (sr.sr_duration == IEEE80211_IOC_SCAN_FOREVER) sr.sr_duration = IEEE80211_SCAN_FOREVER; else { if (sr.sr_duration < IEEE80211_IOC_SCAN_DURATION_MIN || sr.sr_duration > IEEE80211_IOC_SCAN_DURATION_MAX) return EINVAL; sr.sr_duration = msecs_to_ticks(sr.sr_duration); if (sr.sr_duration < 1) sr.sr_duration = 1; } /* convert min/max channel dwell */ if (sr.sr_mindwell != 0) { sr.sr_mindwell = msecs_to_ticks(sr.sr_mindwell); if (sr.sr_mindwell < 1) sr.sr_mindwell = 1; } if (sr.sr_maxdwell != 0) { sr.sr_maxdwell = msecs_to_ticks(sr.sr_maxdwell); if (sr.sr_maxdwell < 1) sr.sr_maxdwell = 1; } /* NB: silently reduce ssid count to what is supported */ if (sr.sr_nssid > IEEE80211_SCAN_MAX_SSID) sr.sr_nssid = IEEE80211_SCAN_MAX_SSID; for (i = 0; i < sr.sr_nssid; i++) if (sr.sr_ssid[i].len > IEEE80211_NWID_LEN) return EINVAL; /* cleanse flags just in case, could reject if invalid flags */ sr.sr_flags &= IEEE80211_IOC_SCAN_FLAGS; /* * Add an implicit NOPICK if the vap is not marked UP. This * allows applications to scan without joining a bss (or picking * a channel and setting up a bss) and without forcing manual * roaming mode--you just need to mark the parent device UP. */ if ((vap->iv_ifp->if_flags & IFF_UP) == 0) sr.sr_flags |= IEEE80211_IOC_SCAN_NOPICK; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: flags 0x%x%s duration 0x%x mindwell %u maxdwell %u nssid %d\n", __func__, sr.sr_flags, (vap->iv_ifp->if_flags & IFF_UP) == 0 ? " (!IFF_UP)" : "", sr.sr_duration, sr.sr_mindwell, sr.sr_maxdwell, sr.sr_nssid); /* * If we are in INIT state then the driver has never had a chance * to setup hardware state to do a scan; we must use the state * machine to get us up to the SCAN state but once we reach SCAN * state we then want to use the supplied params. Stash the * parameters in the vap and mark IEEE80211_FEXT_SCANREQ; the * state machines will recognize this and use the stashed params * to issue the scan request. * * Otherwise just invoke the scan machinery directly. */ IEEE80211_LOCK(ic); if (vap->iv_state == IEEE80211_S_INIT) { /* NB: clobbers previous settings */ vap->iv_scanreq_flags = sr.sr_flags; vap->iv_scanreq_duration = sr.sr_duration; vap->iv_scanreq_nssid = sr.sr_nssid; for (i = 0; i < sr.sr_nssid; i++) { vap->iv_scanreq_ssid[i].len = sr.sr_ssid[i].len; memcpy(vap->iv_scanreq_ssid[i].ssid, sr.sr_ssid[i].ssid, sr.sr_ssid[i].len); } vap->iv_flags_ext |= IEEE80211_FEXT_SCANREQ; IEEE80211_UNLOCK(ic); ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); } else { vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ; IEEE80211_UNLOCK(ic); /* XXX neeed error return codes */ if (sr.sr_flags & IEEE80211_IOC_SCAN_CHECK) { (void) ieee80211_check_scan(vap, sr.sr_flags, sr.sr_duration, sr.sr_mindwell, sr.sr_maxdwell, sr.sr_nssid, /* NB: cheat, we assume structures are compatible */ (const struct ieee80211_scan_ssid *) &sr.sr_ssid[0]); } else { (void) ieee80211_start_scan(vap, sr.sr_flags, sr.sr_duration, sr.sr_mindwell, sr.sr_maxdwell, sr.sr_nssid, /* NB: cheat, we assume structures are compatible */ (const struct ieee80211_scan_ssid *) &sr.sr_ssid[0]); } } return error; #undef IEEE80211_IOC_SCAN_FLAGS } static __noinline int ieee80211_ioctl_setstavlan(struct ieee80211vap *vap, struct ieee80211req *ireq) { struct ieee80211_node *ni; struct ieee80211req_sta_vlan vlan; int error; if (ireq->i_len != sizeof(vlan)) return EINVAL; error = copyin(ireq->i_data, &vlan, sizeof(vlan)); if (error != 0) return error; if (!IEEE80211_ADDR_EQ(vlan.sv_macaddr, zerobssid)) { ni = ieee80211_find_vap_node(&vap->iv_ic->ic_sta, vap, vlan.sv_macaddr); if (ni == NULL) return ENOENT; } else ni = ieee80211_ref_node(vap->iv_bss); ni->ni_vlan = vlan.sv_vlan; ieee80211_free_node(ni); return error; } static int isvap11g(const struct ieee80211vap *vap) { const struct ieee80211_node *bss = vap->iv_bss; return bss->ni_chan != IEEE80211_CHAN_ANYC && IEEE80211_IS_CHAN_ANYG(bss->ni_chan); } static int isvapht(const struct ieee80211vap *vap) { const struct ieee80211_node *bss = vap->iv_bss; return bss->ni_chan != IEEE80211_CHAN_ANYC && IEEE80211_IS_CHAN_HT(bss->ni_chan); } /* * Dummy ioctl set handler so the linker set is defined. */ static int dummy_ioctl_set(struct ieee80211vap *vap, struct ieee80211req *ireq) { return ENOSYS; } IEEE80211_IOCTL_SET(dummy, dummy_ioctl_set); static int ieee80211_ioctl_setdefault(struct ieee80211vap *vap, struct ieee80211req *ireq) { ieee80211_ioctl_setfunc * const *set; int error; SET_FOREACH(set, ieee80211_ioctl_setset) { error = (*set)(vap, ireq); if (error != ENOSYS) return error; } return EINVAL; } static __noinline int ieee80211_ioctl_set80211(struct ieee80211vap *vap, u_long cmd, struct ieee80211req *ireq) { struct ieee80211com *ic = vap->iv_ic; int error; const struct ieee80211_authenticator *auth; uint8_t tmpkey[IEEE80211_KEYBUF_SIZE]; char tmpssid[IEEE80211_NWID_LEN]; uint8_t tmpbssid[IEEE80211_ADDR_LEN]; struct ieee80211_key *k; u_int kid; uint32_t flags; error = 0; switch (ireq->i_type) { case IEEE80211_IOC_SSID: if (ireq->i_val != 0 || ireq->i_len > IEEE80211_NWID_LEN) return EINVAL; error = copyin(ireq->i_data, tmpssid, ireq->i_len); if (error) break; memset(vap->iv_des_ssid[0].ssid, 0, IEEE80211_NWID_LEN); vap->iv_des_ssid[0].len = ireq->i_len; memcpy(vap->iv_des_ssid[0].ssid, tmpssid, ireq->i_len); vap->iv_des_nssid = (ireq->i_len > 0); error = ENETRESET; break; case IEEE80211_IOC_WEP: switch (ireq->i_val) { case IEEE80211_WEP_OFF: vap->iv_flags &= ~IEEE80211_F_PRIVACY; vap->iv_flags &= ~IEEE80211_F_DROPUNENC; break; case IEEE80211_WEP_ON: vap->iv_flags |= IEEE80211_F_PRIVACY; vap->iv_flags |= IEEE80211_F_DROPUNENC; break; case IEEE80211_WEP_MIXED: vap->iv_flags |= IEEE80211_F_PRIVACY; vap->iv_flags &= ~IEEE80211_F_DROPUNENC; break; } error = ENETRESET; break; case IEEE80211_IOC_WEPKEY: kid = (u_int) ireq->i_val; if (kid >= IEEE80211_WEP_NKID) return EINVAL; k = &vap->iv_nw_keys[kid]; if (ireq->i_len == 0) { /* zero-len =>'s delete any existing key */ (void) ieee80211_crypto_delkey(vap, k); break; } if (ireq->i_len > sizeof(tmpkey)) return EINVAL; memset(tmpkey, 0, sizeof(tmpkey)); error = copyin(ireq->i_data, tmpkey, ireq->i_len); if (error) break; ieee80211_key_update_begin(vap); k->wk_keyix = kid; /* NB: force fixed key id */ if (ieee80211_crypto_newkey(vap, IEEE80211_CIPHER_WEP, IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV, k)) { k->wk_keylen = ireq->i_len; memcpy(k->wk_key, tmpkey, sizeof(tmpkey)); IEEE80211_ADDR_COPY(k->wk_macaddr, vap->iv_myaddr); if (!ieee80211_crypto_setkey(vap, k)) error = EINVAL; } else error = EINVAL; ieee80211_key_update_end(vap); break; case IEEE80211_IOC_WEPTXKEY: kid = (u_int) ireq->i_val; if (kid >= IEEE80211_WEP_NKID && (uint16_t) kid != IEEE80211_KEYIX_NONE) return EINVAL; vap->iv_def_txkey = kid; break; case IEEE80211_IOC_AUTHMODE: switch (ireq->i_val) { case IEEE80211_AUTH_WPA: case IEEE80211_AUTH_8021X: /* 802.1x */ case IEEE80211_AUTH_OPEN: /* open */ case IEEE80211_AUTH_SHARED: /* shared-key */ case IEEE80211_AUTH_AUTO: /* auto */ auth = ieee80211_authenticator_get(ireq->i_val); if (auth == NULL) return EINVAL; break; default: return EINVAL; } switch (ireq->i_val) { case IEEE80211_AUTH_WPA: /* WPA w/ 802.1x */ vap->iv_flags |= IEEE80211_F_PRIVACY; ireq->i_val = IEEE80211_AUTH_8021X; break; case IEEE80211_AUTH_OPEN: /* open */ vap->iv_flags &= ~(IEEE80211_F_WPA|IEEE80211_F_PRIVACY); break; case IEEE80211_AUTH_SHARED: /* shared-key */ case IEEE80211_AUTH_8021X: /* 802.1x */ vap->iv_flags &= ~IEEE80211_F_WPA; /* both require a key so mark the PRIVACY capability */ vap->iv_flags |= IEEE80211_F_PRIVACY; break; case IEEE80211_AUTH_AUTO: /* auto */ vap->iv_flags &= ~IEEE80211_F_WPA; /* XXX PRIVACY handling? */ /* XXX what's the right way to do this? */ break; } /* NB: authenticator attach/detach happens on state change */ vap->iv_bss->ni_authmode = ireq->i_val; /* XXX mixed/mode/usage? */ vap->iv_auth = auth; error = ENETRESET; break; case IEEE80211_IOC_CHANNEL: error = ieee80211_ioctl_setchannel(vap, ireq); break; case IEEE80211_IOC_POWERSAVE: switch (ireq->i_val) { case IEEE80211_POWERSAVE_OFF: if (vap->iv_flags & IEEE80211_F_PMGTON) { ieee80211_syncflag(vap, -IEEE80211_F_PMGTON); error = ERESTART; } break; case IEEE80211_POWERSAVE_ON: if ((vap->iv_caps & IEEE80211_C_PMGT) == 0) error = EOPNOTSUPP; else if ((vap->iv_flags & IEEE80211_F_PMGTON) == 0) { ieee80211_syncflag(vap, IEEE80211_F_PMGTON); error = ERESTART; } break; default: error = EINVAL; break; } break; case IEEE80211_IOC_POWERSAVESLEEP: if (ireq->i_val < 0) return EINVAL; ic->ic_lintval = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_RTSTHRESHOLD: if (!(IEEE80211_RTS_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_RTS_MAX)) return EINVAL; vap->iv_rtsthreshold = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_PROTMODE: if (ireq->i_val > IEEE80211_PROT_RTSCTS) return EINVAL; ic->ic_protmode = ireq->i_val; /* NB: if not operating in 11g this can wait */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan)) error = ERESTART; break; case IEEE80211_IOC_TXPOWER: if ((ic->ic_caps & IEEE80211_C_TXPMGT) == 0) return EOPNOTSUPP; if (!(IEEE80211_TXPOWER_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_TXPOWER_MAX)) return EINVAL; ic->ic_txpowlimit = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_ROAMING: if (!(IEEE80211_ROAMING_DEVICE <= ireq->i_val && ireq->i_val <= IEEE80211_ROAMING_MANUAL)) return EINVAL; vap->iv_roaming = ireq->i_val; /* XXXX reset? */ break; case IEEE80211_IOC_PRIVACY: if (ireq->i_val) { /* XXX check for key state? */ vap->iv_flags |= IEEE80211_F_PRIVACY; } else vap->iv_flags &= ~IEEE80211_F_PRIVACY; /* XXX ERESTART? */ break; case IEEE80211_IOC_DROPUNENCRYPTED: if (ireq->i_val) vap->iv_flags |= IEEE80211_F_DROPUNENC; else vap->iv_flags &= ~IEEE80211_F_DROPUNENC; /* XXX ERESTART? */ break; case IEEE80211_IOC_WPAKEY: error = ieee80211_ioctl_setkey(vap, ireq); break; case IEEE80211_IOC_DELKEY: error = ieee80211_ioctl_delkey(vap, ireq); break; case IEEE80211_IOC_MLME: error = ieee80211_ioctl_setmlme(vap, ireq); break; case IEEE80211_IOC_COUNTERMEASURES: if (ireq->i_val) { if ((vap->iv_flags & IEEE80211_F_WPA) == 0) return EOPNOTSUPP; vap->iv_flags |= IEEE80211_F_COUNTERM; } else vap->iv_flags &= ~IEEE80211_F_COUNTERM; /* XXX ERESTART? */ break; case IEEE80211_IOC_WPA: if (ireq->i_val > 3) return EINVAL; /* XXX verify ciphers available */ flags = vap->iv_flags & ~IEEE80211_F_WPA; switch (ireq->i_val) { case 1: if (!(vap->iv_caps & IEEE80211_C_WPA1)) return EOPNOTSUPP; flags |= IEEE80211_F_WPA1; break; case 2: if (!(vap->iv_caps & IEEE80211_C_WPA2)) return EOPNOTSUPP; flags |= IEEE80211_F_WPA2; break; case 3: if ((vap->iv_caps & IEEE80211_C_WPA) != IEEE80211_C_WPA) return EOPNOTSUPP; flags |= IEEE80211_F_WPA1 | IEEE80211_F_WPA2; break; default: /* Can't set any -> error */ return EOPNOTSUPP; } vap->iv_flags = flags; error = ERESTART; /* NB: can change beacon frame */ break; case IEEE80211_IOC_WME: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_WME) == 0) return EOPNOTSUPP; ieee80211_syncflag(vap, IEEE80211_F_WME); } else ieee80211_syncflag(vap, -IEEE80211_F_WME); error = ERESTART; /* NB: can change beacon frame */ break; case IEEE80211_IOC_HIDESSID: if (ireq->i_val) vap->iv_flags |= IEEE80211_F_HIDESSID; else vap->iv_flags &= ~IEEE80211_F_HIDESSID; error = ERESTART; /* XXX ENETRESET? */ break; case IEEE80211_IOC_APBRIDGE: if (ireq->i_val == 0) vap->iv_flags |= IEEE80211_F_NOBRIDGE; else vap->iv_flags &= ~IEEE80211_F_NOBRIDGE; break; case IEEE80211_IOC_BSSID: if (ireq->i_len != sizeof(tmpbssid)) return EINVAL; error = copyin(ireq->i_data, tmpbssid, ireq->i_len); if (error) break; IEEE80211_ADDR_COPY(vap->iv_des_bssid, tmpbssid); if (IEEE80211_ADDR_EQ(vap->iv_des_bssid, zerobssid)) vap->iv_flags &= ~IEEE80211_F_DESBSSID; else vap->iv_flags |= IEEE80211_F_DESBSSID; error = ENETRESET; break; case IEEE80211_IOC_CHANLIST: error = ieee80211_ioctl_setchanlist(vap, ireq); break; #define OLD_IEEE80211_IOC_SCAN_REQ 23 #ifdef OLD_IEEE80211_IOC_SCAN_REQ case OLD_IEEE80211_IOC_SCAN_REQ: IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: active scan request\n", __func__); /* * If we are in INIT state then the driver has never * had a chance to setup hardware state to do a scan; * use the state machine to get us up the SCAN state. * Otherwise just invoke the scan machinery to start * a one-time scan. */ if (vap->iv_state == IEEE80211_S_INIT) ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); else (void) ieee80211_start_scan(vap, IEEE80211_SCAN_ACTIVE | IEEE80211_SCAN_NOPICK | IEEE80211_SCAN_ONCE, IEEE80211_SCAN_FOREVER, 0, 0, /* XXX use ioctl params */ vap->iv_des_nssid, vap->iv_des_ssid); break; #endif /* OLD_IEEE80211_IOC_SCAN_REQ */ case IEEE80211_IOC_SCAN_REQ: error = ieee80211_ioctl_scanreq(vap, ireq); break; case IEEE80211_IOC_SCAN_CANCEL: IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel scan\n", __func__); ieee80211_cancel_scan(vap); break; case IEEE80211_IOC_HTCONF: if (ireq->i_val & 1) ieee80211_syncflag_ext(vap, IEEE80211_FEXT_HT); else ieee80211_syncflag_ext(vap, -IEEE80211_FEXT_HT); if (ireq->i_val & 2) ieee80211_syncflag_ext(vap, IEEE80211_FEXT_USEHT40); else ieee80211_syncflag_ext(vap, -IEEE80211_FEXT_USEHT40); error = ENETRESET; break; case IEEE80211_IOC_ADDMAC: case IEEE80211_IOC_DELMAC: error = ieee80211_ioctl_macmac(vap, ireq); break; case IEEE80211_IOC_MACCMD: error = ieee80211_ioctl_setmaccmd(vap, ireq); break; case IEEE80211_IOC_STA_STATS: error = ieee80211_ioctl_setstastats(vap, ireq); break; case IEEE80211_IOC_STA_TXPOW: error = ieee80211_ioctl_setstatxpow(vap, ireq); break; case IEEE80211_IOC_WME_CWMIN: /* WME: CWmin */ case IEEE80211_IOC_WME_CWMAX: /* WME: CWmax */ case IEEE80211_IOC_WME_AIFS: /* WME: AIFS */ case IEEE80211_IOC_WME_TXOPLIMIT: /* WME: txops limit */ case IEEE80211_IOC_WME_ACM: /* WME: ACM (bss only) */ case IEEE80211_IOC_WME_ACKPOLICY: /* WME: ACK policy (bss only) */ error = ieee80211_ioctl_setwmeparam(vap, ireq); break; case IEEE80211_IOC_DTIM_PERIOD: if (vap->iv_opmode != IEEE80211_M_HOSTAP && vap->iv_opmode != IEEE80211_M_IBSS) return EINVAL; if (IEEE80211_DTIM_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_DTIM_MAX) { vap->iv_dtim_period = ireq->i_val; error = ENETRESET; /* requires restart */ } else error = EINVAL; break; case IEEE80211_IOC_BEACON_INTERVAL: if (vap->iv_opmode != IEEE80211_M_HOSTAP && vap->iv_opmode != IEEE80211_M_IBSS) return EINVAL; if (IEEE80211_BINTVAL_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_BINTVAL_MAX) { ic->ic_bintval = ireq->i_val; error = ENETRESET; /* requires restart */ } else error = EINVAL; break; case IEEE80211_IOC_PUREG: if (ireq->i_val) vap->iv_flags |= IEEE80211_F_PUREG; else vap->iv_flags &= ~IEEE80211_F_PUREG; /* NB: reset only if we're operating on an 11g channel */ if (isvap11g(vap)) error = ENETRESET; break; case IEEE80211_IOC_BGSCAN: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_BGSCAN) == 0) return EOPNOTSUPP; vap->iv_flags |= IEEE80211_F_BGSCAN; } else vap->iv_flags &= ~IEEE80211_F_BGSCAN; break; case IEEE80211_IOC_BGSCAN_IDLE: if (ireq->i_val >= IEEE80211_BGSCAN_IDLE_MIN) vap->iv_bgscanidle = ireq->i_val*hz/1000; else error = EINVAL; break; case IEEE80211_IOC_BGSCAN_INTERVAL: if (ireq->i_val >= IEEE80211_BGSCAN_INTVAL_MIN) vap->iv_bgscanintvl = ireq->i_val*hz; else error = EINVAL; break; case IEEE80211_IOC_SCANVALID: if (ireq->i_val >= IEEE80211_SCAN_VALID_MIN) vap->iv_scanvalid = ireq->i_val*hz; else error = EINVAL; break; case IEEE80211_IOC_FRAGTHRESHOLD: if ((vap->iv_caps & IEEE80211_C_TXFRAG) == 0 && ireq->i_val != IEEE80211_FRAG_MAX) return EOPNOTSUPP; if (!(IEEE80211_FRAG_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_FRAG_MAX)) return EINVAL; vap->iv_fragthreshold = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_BURST: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_BURST) == 0) return EOPNOTSUPP; ieee80211_syncflag(vap, IEEE80211_F_BURST); } else ieee80211_syncflag(vap, -IEEE80211_F_BURST); error = ERESTART; break; case IEEE80211_IOC_BMISSTHRESHOLD: if (!(IEEE80211_HWBMISS_MIN <= ireq->i_val && ireq->i_val <= IEEE80211_HWBMISS_MAX)) return EINVAL; vap->iv_bmissthreshold = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_CURCHAN: error = ieee80211_ioctl_setcurchan(vap, ireq); break; case IEEE80211_IOC_SHORTGI: if (ireq->i_val) { #define IEEE80211_HTCAP_SHORTGI \ (IEEE80211_HTCAP_SHORTGI20 | IEEE80211_HTCAP_SHORTGI40) if (((ireq->i_val ^ vap->iv_htcaps) & IEEE80211_HTCAP_SHORTGI) != 0) return EINVAL; if (ireq->i_val & IEEE80211_HTCAP_SHORTGI20) vap->iv_flags_ext |= IEEE80211_FEXT_SHORTGI20; if (ireq->i_val & IEEE80211_HTCAP_SHORTGI40) vap->iv_flags_ext |= IEEE80211_FEXT_SHORTGI40; #undef IEEE80211_HTCAP_SHORTGI } else vap->iv_flags_ext &= ~(IEEE80211_FEXT_SHORTGI20 | IEEE80211_FEXT_SHORTGI40); error = ERESTART; break; case IEEE80211_IOC_AMPDU: if (ireq->i_val && (vap->iv_htcaps & IEEE80211_HTC_AMPDU) == 0) return EINVAL; if (ireq->i_val & 1) vap->iv_flags_ext |= IEEE80211_FEXT_AMPDU_TX; else vap->iv_flags_ext &= ~IEEE80211_FEXT_AMPDU_TX; if (ireq->i_val & 2) vap->iv_flags_ext |= IEEE80211_FEXT_AMPDU_RX; else vap->iv_flags_ext &= ~IEEE80211_FEXT_AMPDU_RX; /* NB: reset only if we're operating on an 11n channel */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_AMPDU_LIMIT: if (!(IEEE80211_HTCAP_MAXRXAMPDU_8K <= ireq->i_val && ireq->i_val <= IEEE80211_HTCAP_MAXRXAMPDU_64K)) return EINVAL; if (vap->iv_opmode == IEEE80211_M_HOSTAP) vap->iv_ampdu_rxmax = ireq->i_val; else vap->iv_ampdu_limit = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_AMPDU_DENSITY: if (!(IEEE80211_HTCAP_MPDUDENSITY_NA <= ireq->i_val && ireq->i_val <= IEEE80211_HTCAP_MPDUDENSITY_16)) return EINVAL; vap->iv_ampdu_density = ireq->i_val; error = ERESTART; break; case IEEE80211_IOC_AMSDU: if (ireq->i_val && (vap->iv_htcaps & IEEE80211_HTC_AMSDU) == 0) return EINVAL; if (ireq->i_val & 1) vap->iv_flags_ext |= IEEE80211_FEXT_AMSDU_TX; else vap->iv_flags_ext &= ~IEEE80211_FEXT_AMSDU_TX; if (ireq->i_val & 2) vap->iv_flags_ext |= IEEE80211_FEXT_AMSDU_RX; else vap->iv_flags_ext &= ~IEEE80211_FEXT_AMSDU_RX; /* NB: reset only if we're operating on an 11n channel */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_AMSDU_LIMIT: /* XXX validate */ vap->iv_amsdu_limit = ireq->i_val; /* XXX truncation? */ break; case IEEE80211_IOC_PUREN: if (ireq->i_val) { if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) == 0) return EINVAL; vap->iv_flags_ext |= IEEE80211_FEXT_PUREN; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_PUREN; /* NB: reset only if we're operating on an 11n channel */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_DOTH: if (ireq->i_val) { #if 0 /* XXX no capability */ if ((vap->iv_caps & IEEE80211_C_DOTH) == 0) return EOPNOTSUPP; #endif vap->iv_flags |= IEEE80211_F_DOTH; } else vap->iv_flags &= ~IEEE80211_F_DOTH; error = ENETRESET; break; case IEEE80211_IOC_REGDOMAIN: error = ieee80211_ioctl_setregdomain(vap, ireq); break; case IEEE80211_IOC_ROAM: error = ieee80211_ioctl_setroam(vap, ireq); break; case IEEE80211_IOC_TXPARAMS: error = ieee80211_ioctl_settxparams(vap, ireq); break; case IEEE80211_IOC_HTCOMPAT: if (ireq->i_val) { if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) == 0) return EOPNOTSUPP; vap->iv_flags_ext |= IEEE80211_FEXT_HTCOMPAT; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_HTCOMPAT; /* NB: reset only if we're operating on an 11n channel */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_DWDS: if (ireq->i_val) { /* NB: DWDS only makes sense for WDS-capable devices */ if ((ic->ic_caps & IEEE80211_C_WDS) == 0) return EOPNOTSUPP; /* NB: DWDS is used only with ap+sta vaps */ if (vap->iv_opmode != IEEE80211_M_HOSTAP && vap->iv_opmode != IEEE80211_M_STA) return EINVAL; vap->iv_flags |= IEEE80211_F_DWDS; - } else + if (vap->iv_opmode == IEEE80211_M_STA) + vap->iv_flags_ext |= IEEE80211_FEXT_4ADDR; + } else { vap->iv_flags &= ~IEEE80211_F_DWDS; + if (vap->iv_opmode == IEEE80211_M_STA) + vap->iv_flags_ext &= ~IEEE80211_FEXT_4ADDR; + } break; case IEEE80211_IOC_INACTIVITY: if (ireq->i_val) vap->iv_flags_ext |= IEEE80211_FEXT_INACT; else vap->iv_flags_ext &= ~IEEE80211_FEXT_INACT; break; case IEEE80211_IOC_APPIE: error = ieee80211_ioctl_setappie(vap, ireq); break; case IEEE80211_IOC_WPS: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_WPA) == 0) return EOPNOTSUPP; vap->iv_flags_ext |= IEEE80211_FEXT_WPS; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_WPS; break; case IEEE80211_IOC_TSN: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_WPA) == 0) return EOPNOTSUPP; vap->iv_flags_ext |= IEEE80211_FEXT_TSN; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_TSN; break; case IEEE80211_IOC_CHANSWITCH: error = ieee80211_ioctl_chanswitch(vap, ireq); break; case IEEE80211_IOC_DFS: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_DFS) == 0) return EOPNOTSUPP; /* NB: DFS requires 11h support */ if ((vap->iv_flags & IEEE80211_F_DOTH) == 0) return EINVAL; vap->iv_flags_ext |= IEEE80211_FEXT_DFS; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_DFS; break; case IEEE80211_IOC_DOTD: if (ireq->i_val) vap->iv_flags_ext |= IEEE80211_FEXT_DOTD; else vap->iv_flags_ext &= ~IEEE80211_FEXT_DOTD; if (vap->iv_opmode == IEEE80211_M_STA) error = ENETRESET; break; case IEEE80211_IOC_HTPROTMODE: if (ireq->i_val > IEEE80211_PROT_RTSCTS) return EINVAL; ic->ic_htprotmode = ireq->i_val ? IEEE80211_PROT_RTSCTS : IEEE80211_PROT_NONE; /* NB: if not operating in 11n this can wait */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_STA_VLAN: error = ieee80211_ioctl_setstavlan(vap, ireq); break; case IEEE80211_IOC_SMPS: if ((ireq->i_val &~ IEEE80211_HTCAP_SMPS) != 0 || ireq->i_val == 0x0008) /* value of 2 is reserved */ return EINVAL; if (ireq->i_val != IEEE80211_HTCAP_SMPS_OFF && (vap->iv_htcaps & IEEE80211_HTC_SMPS) == 0) return EOPNOTSUPP; vap->iv_htcaps = (vap->iv_htcaps &~ IEEE80211_HTCAP_SMPS) | ireq->i_val; /* NB: if not operating in 11n this can wait */ if (isvapht(vap)) error = ERESTART; break; case IEEE80211_IOC_RIFS: if (ireq->i_val != 0) { if ((vap->iv_htcaps & IEEE80211_HTC_RIFS) == 0) return EOPNOTSUPP; vap->iv_flags_ext |= IEEE80211_FEXT_RIFS; } else vap->iv_flags_ext &= ~IEEE80211_FEXT_RIFS; /* NB: if not operating in 11n this can wait */ if (isvapht(vap)) error = ERESTART; break; default: error = ieee80211_ioctl_setdefault(vap, ireq); break; } /* * The convention is that ENETRESET means an operation * requires a complete re-initialization of the device (e.g. * changing something that affects the association state). * ERESTART means the request may be handled with only a * reload of the hardware state. We hand ERESTART requests * to the iv_reset callback so the driver can decide. If * a device does not fillin iv_reset then it defaults to one * that returns ENETRESET. Otherwise a driver may return * ENETRESET (in which case a full reset will be done) or * 0 to mean there's no need to do anything (e.g. when the * change has no effect on the driver/device). */ if (error == ERESTART) error = IFNET_IS_UP_RUNNING(vap->iv_ifp) ? vap->iv_reset(vap, ireq->i_type) : 0; if (error == ENETRESET) { /* XXX need to re-think AUTO handling */ if (IS_UP_AUTO(vap)) ieee80211_init(vap); error = 0; } return error; } /* * Rebuild the parent's multicast address list after an add/del * of a multicast address for a vap. We have no way to tell * what happened above to optimize the work so we purge the entire * list and rebuild from scratch. This is way expensive. * Note also the half-baked workaround for if_addmulti calling * back to the parent device; there's no way to insert mcast * entries quietly and/or cheaply. */ static void ieee80211_ioctl_updatemulti(struct ieee80211com *ic) { struct ifnet *parent = ic->ic_ifp; struct ieee80211vap *vap; void *ioctl; IEEE80211_LOCK(ic); if_purgemaddrs(parent); ioctl = parent->if_ioctl; /* XXX WAR if_allmulti */ parent->if_ioctl = NULL; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ifnet *ifp = vap->iv_ifp; struct ifmultiaddr *ifma; TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) (void) if_addmulti(parent, ifma->ifma_addr, NULL); } parent->if_ioctl = ioctl; ic->ic_update_mcast(ic->ic_ifp); IEEE80211_UNLOCK(ic); } int ieee80211_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct ieee80211vap *vap; struct ieee80211com *ic; int error = 0; struct ifreq *ifr; struct ifaddr *ifa; /* XXX */ vap = ifp->if_softc; if (vap == NULL) { /* * During detach we clear the backpointer in the softc * so any ioctl request through the ifnet that arrives * before teardown is ignored/rejected. In particular * this hack handles destroying a vap used by an app * like wpa_supplicant that will respond to the vap * being forced into INIT state by immediately trying * to force it back up. We can yank this hack if/when * we can destroy the ifnet before cleaning up vap state. */ return ENXIO; } switch (cmd) { case SIOCSIFFLAGS: ic = vap->iv_ic; IEEE80211_LOCK(ic); ieee80211_syncifflag_locked(ic, IFF_PROMISC); ieee80211_syncifflag_locked(ic, IFF_ALLMULTI); if (ifp->if_flags & IFF_UP) { /* * Bring ourself up unless we're already operational. * If we're the first vap and the parent is not up * then it will automatically be brought up as a * side-effect of bringing ourself up. */ if (vap->iv_state == IEEE80211_S_INIT) ieee80211_start_locked(vap); } else if (ifp->if_drv_flags & IFF_DRV_RUNNING) { /* * Stop ourself. If we are the last vap to be * marked down the parent will also be taken down. */ ieee80211_stop_locked(vap); } IEEE80211_UNLOCK(ic); /* Wait for parent ioctl handler if it was queued */ ieee80211_waitfor_parent(ic); break; case SIOCADDMULTI: case SIOCDELMULTI: ieee80211_ioctl_updatemulti(vap->iv_ic); break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: ifr = (struct ifreq *)data; error = ifmedia_ioctl(ifp, ifr, &vap->iv_media, cmd); break; case SIOCG80211: error = ieee80211_ioctl_get80211(vap, cmd, (struct ieee80211req *) data); break; case SIOCS80211: error = priv_check(curthread, PRIV_NET80211_MANAGE); if (error == 0) error = ieee80211_ioctl_set80211(vap, cmd, (struct ieee80211req *) data); break; case SIOCG80211STATS: ifr = (struct ifreq *)data; copyout(&vap->iv_stats, ifr->ifr_data, sizeof (vap->iv_stats)); break; case SIOCSIFMTU: ifr = (struct ifreq *)data; if (!(IEEE80211_MTU_MIN <= ifr->ifr_mtu && ifr->ifr_mtu <= IEEE80211_MTU_MAX)) error = EINVAL; else ifp->if_mtu = ifr->ifr_mtu; break; case SIOCSIFADDR: /* * XXX Handle this directly so we can supress if_init calls. * XXX This should be done in ether_ioctl but for the moment * XXX there are too many other parts of the system that * XXX set IFF_UP and so supress if_init being called when * XXX it should be. */ ifa = (struct ifaddr *) data; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: if ((ifp->if_flags & IFF_UP) == 0) { ifp->if_flags |= IFF_UP; ifp->if_init(ifp->if_softc); } arp_ifinit(ifp, ifa); break; #endif #ifdef IPX /* * XXX - This code is probably wrong, * but has been copied many times. */ case AF_IPX: { struct ipx_addr *ina = &(IA_SIPX(ifa)->sipx_addr); if (ipx_nullhost(*ina)) ina->x_host = *(union ipx_host *) IF_LLADDR(ifp); else bcopy((caddr_t) ina->x_host.c_host, (caddr_t) IF_LLADDR(ifp), ETHER_ADDR_LEN); /* fall thru... */ } #endif default: if ((ifp->if_flags & IFF_UP) == 0) { ifp->if_flags |= IFF_UP; ifp->if_init(ifp->if_softc); } break; } break; /* Pass NDIS ioctls up to the driver */ case SIOCGDRVSPEC: case SIOCSDRVSPEC: case SIOCGPRIVATE_0: { struct ifnet *parent = vap->iv_ic->ic_ifp; error = parent->if_ioctl(parent, cmd, data); break; } default: error = ether_ioctl(ifp, cmd, data); break; } return error; } Index: head/sys/net80211/ieee80211_output.c =================================================================== --- head/sys/net80211/ieee80211_output.c (revision 191554) +++ head/sys/net80211/ieee80211_output.c (revision 191555) @@ -1,2811 +1,2810 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #ifdef INET #include #include #include #include #endif #define ETHER_HEADER_COPY(dst, src) \ memcpy(dst, src, sizeof(struct ether_header)) static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *, u_int hdrsize, u_int ciphdrsize, u_int mtu); static void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int); #ifdef IEEE80211_DEBUG /* * Decide if an outbound management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: return (vap->iv_opmode == IEEE80211_M_IBSS); } return 1; } #endif /* * Start method for vap's. All packets from the stack come * through here. We handle common processing of the packets * before dispatching them to the underlying device. */ void ieee80211_start(struct ifnet *ifp) { #define IS_DWDS(vap) \ (vap->iv_opmode == IEEE80211_M_WDS && \ (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; struct ifnet *parent = ic->ic_ifp; struct ieee80211_node *ni; struct mbuf *m; struct ether_header *eh; int error; /* NB: parent must be up and running */ if (!IFNET_IS_UP_RUNNING(parent)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, parent %s not up+running\n", __func__, parent->if_xname); /* XXX stat */ return; } if (vap->iv_state == IEEE80211_S_SLEEP) { /* * In power save, wakeup device for transmit. */ ieee80211_new_state(vap, IEEE80211_S_RUN, 0); return; } /* * No data frames go out unless we're running. * Note in particular this covers CAC and CSA * states (though maybe we should check muting * for CSA). */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_LOCK(ic); /* re-check under the com lock to avoid races */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, in %s state\n", __func__, ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_tx_badstate++; ifp->if_drv_flags |= IFF_DRV_OACTIVE; IEEE80211_UNLOCK(ic); return; } IEEE80211_UNLOCK(ic); } for (;;) { IFQ_DEQUEUE(&ifp->if_snd, m); if (m == NULL) break; /* * Sanitize mbuf flags for net80211 use. We cannot * clear M_PWR_SAV because this may be set for frames * that are re-submitted from the power save queue. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~(M_80211_TX - M_PWR_SAV); /* * Cancel any background scan. */ if (ic->ic_flags & IEEE80211_F_SCAN) ieee80211_cancel_anyscan(vap); /* * Find the node for the destination so we can do * things like power save and fast frames aggregation. * * NB: past this point various code assumes the first * mbuf has the 802.3 header present (and contiguous). */ ni = NULL; if (m->m_len < sizeof(struct ether_header) && (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "discard frame, %s\n", "m_pullup failed"); vap->iv_stats.is_tx_nobuf++; /* XXX */ ifp->if_oerrors++; continue; } eh = mtod(m, struct ether_header *); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { if (IS_DWDS(vap)) { /* * Only unicast frames from the above go out * DWDS vaps; multicast frames are handled by * dispatching the frame as it comes through * the AP vap (see below). */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_WDS, eh->ether_dhost, "mcast", "%s", "on DWDS"); vap->iv_stats.is_dwds_mcast++; m_freem(m); continue; } if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* * Spam DWDS vap's w/ multicast traffic. */ /* XXX only if dwds in use? */ ieee80211_dwds_mcast(vap, m); } } ni = ieee80211_find_txnode(vap, eh->ether_dhost); if (ni == NULL) { /* NB: ieee80211_find_txnode does stat+msg */ ifp->if_oerrors++; m_freem(m); continue; } if (ni->ni_associd == 0 && (ni->ni_flags & IEEE80211_NODE_ASSOCID)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, eh->ether_dhost, NULL, "sta not associated (type 0x%04x)", htons(eh->ether_type)); vap->iv_stats.is_tx_notassoc++; ifp->if_oerrors++; m_freem(m); ieee80211_free_node(ni); continue; } if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && (m->m_flags & M_PWR_SAV) == 0) { /* * Station in power save mode; pass the frame * to the 802.11 layer and continue. We'll get * the frame back when the time is right. * XXX lose WDS vap linkage? */ (void) ieee80211_pwrsave(ni, m); ieee80211_free_node(ni); continue; } /* calculate priority so drivers can find the tx queue */ if (ieee80211_classify(ni, m)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, eh->ether_dhost, NULL, "%s", "classification failure"); vap->iv_stats.is_tx_classify++; ifp->if_oerrors++; m_freem(m); ieee80211_free_node(ni); continue; } /* * Stash the node pointer. Note that we do this after * any call to ieee80211_dwds_mcast because that code * uses any existing value for rcvif to identify the * interface it (might have been) received on. */ m->m_pkthdr.rcvif = (void *)ni; BPF_MTAP(ifp, m); /* 802.3 tx */ /* * Check if A-MPDU tx aggregation is setup or if we * should try to enable it. The sta must be associated * with HT and A-MPDU enabled for use. When the policy * routine decides we should enable A-MPDU we issue an * ADDBA request and wait for a reply. The frame being * encapsulated will go out w/o using A-MPDU, or possibly * it might be collected by the driver and held/retransmit. * The default ic_ampdu_enable routine handles staggering * ADDBA requests in case the receiver NAK's us or we are * otherwise unable to establish a BA stream. */ if ((ni->ni_flags & IEEE80211_NODE_AMPDU_TX) && (vap->iv_flags_ext & IEEE80211_FEXT_AMPDU_TX) && (m->m_flags & M_EAPOL) == 0) { const int ac = M_WME_GETAC(m); struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac]; ieee80211_txampdu_count_packet(tap); if (IEEE80211_AMPDU_RUNNING(tap)) { /* * Operational, mark frame for aggregation. * * XXX do tx aggregation here */ m->m_flags |= M_AMPDU_MPDU; } else if (!IEEE80211_AMPDU_REQUESTED(tap) && ic->ic_ampdu_enable(ni, tap)) { /* * Not negotiated yet, request service. */ ieee80211_ampdu_request(ni, tap); /* XXX hold frame for reply? */ } } #ifdef IEEE80211_SUPPORT_SUPERG else if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF)) { m = ieee80211_ff_check(ni, m); if (m == NULL) { /* NB: any ni ref held on stageq */ continue; } } #endif /* IEEE80211_SUPPORT_SUPERG */ if (__predict_true((vap->iv_caps & IEEE80211_C_8023ENCAP) == 0)) { /* * Encapsulate the packet in prep for transmission. */ m = ieee80211_encap(vap, ni, m); if (m == NULL) { /* NB: stat+msg handled in ieee80211_encap */ ieee80211_free_node(ni); continue; } } /* XXX fragmented frames not handled */ if (bpf_peers_present(vap->iv_rawbpf)) bpf_mtap(vap->iv_rawbpf, m); error = parent->if_transmit(parent, m); if (error != 0) { /* NB: IFQ_HANDOFF reclaims mbuf */ ieee80211_free_node(ni); } else { ifp->if_opackets++; } ic->ic_lastdata = ticks; } #undef IS_DWDS } /* * 802.11 output routine. This is (currently) used only to * connect bpf write calls to the 802.11 layer for injecting * raw 802.11 frames. */ int ieee80211_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct route *ro) { #define senderr(e) do { error = (e); goto bad;} while (0) struct ieee80211_node *ni = NULL; struct ieee80211vap *vap; struct ieee80211_frame *wh; int error; if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { /* * Short-circuit requests if the vap is marked OACTIVE * as this is used when tearing down state to indicate * the vap may be gone. This can also happen because a * packet came down through ieee80211_start before the * vap entered RUN state in which case it's also ok to * just drop the frame. This should not be necessary * but callers of if_output don't check OACTIVE. */ senderr(ENETDOWN); } vap = ifp->if_softc; /* * Hand to the 802.3 code if not tagged as * a raw 802.11 frame. */ if (dst->sa_family != AF_IEEE80211) return vap->iv_output(ifp, m, dst, ro); #ifdef MAC error = mac_check_ifnet_transmit(ifp, m); if (error) senderr(error); #endif if (ifp->if_flags & IFF_MONITOR) senderr(ENETDOWN); if (!IFNET_IS_UP_RUNNING(ifp)) senderr(ENETDOWN); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, "block %s frame in CAC state\n", "raw data"); vap->iv_stats.is_tx_badstate++; senderr(EIO); /* XXX */ } /* XXX bypass bridge, pfil, carp, etc. */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_ack)) senderr(EIO); /* XXX */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) senderr(EIO); /* XXX */ /* locate destination node */ switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: case IEEE80211_FC1_DIR_FROMDS: ni = ieee80211_find_txnode(vap, wh->i_addr1); break; case IEEE80211_FC1_DIR_TODS: case IEEE80211_FC1_DIR_DSTODS: if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) senderr(EIO); /* XXX */ ni = ieee80211_find_txnode(vap, wh->i_addr3); break; default: senderr(EIO); /* XXX */ } if (ni == NULL) { /* * Permit packets w/ bpf params through regardless * (see below about sa_len). */ if (dst->sa_len == 0) senderr(EHOSTUNREACH); ni = ieee80211_ref_node(vap->iv_bss); } /* * Sanitize mbuf for net80211 flags leaked from above. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~M_80211_TX; /* calculate priority so drivers can find the tx queue */ /* XXX assumes an 802.3 frame */ if (ieee80211_classify(ni, m)) senderr(EIO); /* XXX */ if (bpf_peers_present(vap->iv_rawbpf)) bpf_mtap(vap->iv_rawbpf, m); IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); /* NB: ieee80211_encap does not include 802.11 header */ IEEE80211_NODE_STAT_ADD(ni, tx_bytes, m->m_pkthdr.len); /* * NB: DLT_IEEE802_11_RADIO identifies the parameters are * present by setting the sa_len field of the sockaddr (yes, * this is a hack). * NB: we assume sa_data is suitably aligned to cast. */ return vap->iv_ic->ic_raw_xmit(ni, m, (const struct ieee80211_bpf_params *)(dst->sa_len ? dst->sa_data : NULL)); bad: if (m != NULL) m_freem(m); if (ni != NULL) ieee80211_free_node(ni); return error; #undef senderr } /* * Set the direction field and address fields of an outgoing * frame. Note this should be called early on in constructing * a frame as it sets i_fc[1]; other bits can then be or'd in. */ static void ieee80211_send_setup( struct ieee80211_node *ni, struct mbuf *m, int type, int tid, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN]) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); ieee80211_seq seqno; wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { struct ieee80211vap *vap = ni->ni_vap; switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, bssid); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, da); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, bssid); IEEE80211_ADDR_COPY(wh->i_addr3, sa); break; case IEEE80211_M_WDS: wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, da); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); break; case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ break; } } else { wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, bssid); } *(uint16_t *)&wh->i_dur[0] = 0; seqno = ni->ni_txseqs[tid]++; *(uint16_t *)&wh->i_seq[0] = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) m->m_flags |= M_MCAST; #undef WH4 } /* * Send a management frame to the specified node. The node pointer * must have a reference as the pointer will be passed to the driver * and potentially held for a long time. If the frame is successfully * dispatched to the driver, then it is responsible for freeing the * reference (and potentially free'ing up any associated storage); * otherwise deal with reclaiming any reference (on error). */ int ieee80211_mgmt_output(struct ieee80211_node *ni, struct mbuf *m, int type, struct ieee80211_bpf_params *params) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; KASSERT(ni != NULL, ("null node")); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); vap->iv_stats.is_tx_badstate++; ieee80211_free_node(ni); m_freem(m); return EIO; /* XXX */ } M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) { ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | type, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr1, "encrypting frame (%s)", __func__); wh->i_fc[1] |= IEEE80211_FC1_WEP; } m->m_flags |= M_ENCAP; /* mark encapsulated */ KASSERT(type != IEEE80211_FC0_SUBTYPE_PROBE_RESP, ("probe response?")); M_WME_SETAC(m, params->ibp_pri); #ifdef IEEE80211_DEBUG /* avoid printing too many frames */ if ((ieee80211_msg_debug(vap) && doprint(vap, type)) || ieee80211_msg_dumppkts(vap)) { printf("[%s] send %s on channel %u\n", ether_sprintf(wh->i_addr1), ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT], ieee80211_chan2ieee(ic, ic->ic_curchan)); } #endif IEEE80211_NODE_STAT(ni, tx_mgmt); return ic->ic_raw_xmit(ni, m, params); } /* * Send a null data frame to the specified node. If the station * is setup for QoS then a QoS Null Data frame is constructed. * If this is a WDS station then a 4-address frame is constructed. * * NB: the caller is assumed to have setup a node reference * for use; this is necessary to deal with a race condition * when probing for inactive stations. Like ieee80211_mgmt_output * we must cleanup any node reference on error; however we * can safely just unref it as we know it will never be the * last reference to the node. */ int ieee80211_send_nulldata(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct mbuf *m; struct ieee80211_frame *wh; int hdrlen; uint8_t *frm; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", "null data"); ieee80211_unref_node(&ni); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } if (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) hdrlen = sizeof(struct ieee80211_qosframe); else hdrlen = sizeof(struct ieee80211_frame); /* NB: only WDS vap's get 4-address frames */ if (vap->iv_opmode == IEEE80211_M_WDS) hdrlen += IEEE80211_ADDR_LEN; if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrlen = roundup(hdrlen, sizeof(uint32_t)); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + hdrlen, 0); if (m == NULL) { /* XXX debug msg */ ieee80211_unref_node(&ni); vap->iv_stats.is_tx_nobuf++; return ENOMEM; } KASSERT(M_LEADINGSPACE(m) >= hdrlen, ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, hdrlen, M_DONTWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); /* NB: a little lie */ if (ni->ni_flags & IEEE80211_NODE_QOS) { const int tid = WME_AC_TO_TID(WME_AC_BE); uint8_t *qos; ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS_NULL, tid, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (vap->iv_opmode == IEEE80211_M_WDS) qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; else qos = ((struct ieee80211_qosframe *) wh)->i_qos; qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[WME_AC_BE].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; qos[1] = 0; } else { ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); } if (vap->iv_opmode != IEEE80211_M_WDS) { /* NB: power management bit is never sent by an AP */ if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && vap->iv_opmode != IEEE80211_M_HOSTAP) wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; } m->m_len = m->m_pkthdr.len = hdrlen; m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_data); IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, ni, "send %snull data frame on channel %u, pwr mgt %s", ni->ni_flags & IEEE80211_NODE_QOS ? "QoS " : "", ieee80211_chan2ieee(ic, ic->ic_curchan), wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); return ic->ic_raw_xmit(ni, m, NULL); } /* * Assign priority to a frame based on any vlan tag assigned * to the station and/or any Diffserv setting in an IP header. * Finally, if an ACM policy is setup (in station mode) it's * applied. */ int ieee80211_classify(struct ieee80211_node *ni, struct mbuf *m) { const struct ether_header *eh = mtod(m, struct ether_header *); int v_wme_ac, d_wme_ac, ac; /* * Always promote PAE/EAPOL frames to high priority. */ if (eh->ether_type == htons(ETHERTYPE_PAE)) { /* NB: mark so others don't need to check header */ m->m_flags |= M_EAPOL; ac = WME_AC_VO; goto done; } /* * Non-qos traffic goes to BE. */ if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { ac = WME_AC_BE; goto done; } /* * If node has a vlan tag then all traffic * to it must have a matching tag. */ v_wme_ac = 0; if (ni->ni_vlan != 0) { if ((m->m_flags & M_VLANTAG) == 0) { IEEE80211_NODE_STAT(ni, tx_novlantag); return 1; } if (EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != EVL_VLANOFTAG(ni->ni_vlan)) { IEEE80211_NODE_STAT(ni, tx_vlanmismatch); return 1; } /* map vlan priority to AC */ v_wme_ac = TID_TO_WME_AC(EVL_PRIOFTAG(ni->ni_vlan)); } #ifdef INET if (eh->ether_type == htons(ETHERTYPE_IP)) { uint8_t tos; /* * IP frame, map the DSCP bits from the TOS field. */ /* XXX m_copydata may be too slow for fast path */ /* NB: ip header may not be in first mbuf */ m_copydata(m, sizeof(struct ether_header) + offsetof(struct ip, ip_tos), sizeof(tos), &tos); tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ d_wme_ac = TID_TO_WME_AC(tos); } else { #endif /* INET */ d_wme_ac = WME_AC_BE; #ifdef INET } #endif /* * Use highest priority AC. */ if (v_wme_ac > d_wme_ac) ac = v_wme_ac; else ac = d_wme_ac; /* * Apply ACM policy. */ if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) { static const int acmap[4] = { WME_AC_BK, /* WME_AC_BE */ WME_AC_BK, /* WME_AC_BK */ WME_AC_BE, /* WME_AC_VI */ WME_AC_VI, /* WME_AC_VO */ }; struct ieee80211com *ic = ni->ni_ic; while (ac != WME_AC_BK && ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) ac = acmap[ac]; } done: M_WME_SETAC(m, ac); return 0; } /* * Insure there is sufficient contiguous space to encapsulate the * 802.11 data frame. If room isn't already there, arrange for it. * Drivers and cipher modules assume we have done the necessary work * and fail rudely if they don't find the space they need. */ struct mbuf * ieee80211_mbuf_adjust(struct ieee80211vap *vap, int hdrsize, struct ieee80211_key *key, struct mbuf *m) { #define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) int needed_space = vap->iv_ic->ic_headroom + hdrsize; if (key != NULL) { /* XXX belongs in crypto code? */ needed_space += key->wk_cipher->ic_header; /* XXX frags */ /* * When crypto is being done in the host we must insure * the data are writable for the cipher routines; clone * a writable mbuf chain. * XXX handle SWMIC specially */ if (key->wk_flags & (IEEE80211_KEY_SWENCRYPT|IEEE80211_KEY_SWENMIC)) { m = m_unshare(m, M_NOWAIT); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot get writable mbuf\n", __func__); vap->iv_stats.is_tx_nobuf++; /* XXX new stat */ return NULL; } } } /* * We know we are called just before stripping an Ethernet * header and prepending an LLC header. This means we know * there will be * sizeof(struct ether_header) - sizeof(struct llc) * bytes recovered to which we need additional space for the * 802.11 header and any crypto header. */ /* XXX check trailing space and copy instead? */ if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); if (n == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot expand storage\n", __func__); vap->iv_stats.is_tx_nobuf++; m_freem(m); return NULL; } KASSERT(needed_space <= MHLEN, ("not enough room, need %u got %zu\n", needed_space, MHLEN)); /* * Setup new mbuf to have leading space to prepend the * 802.11 header and any crypto header bits that are * required (the latter are added when the driver calls * back to ieee80211_crypto_encap to do crypto encapsulation). */ /* NB: must be first 'cuz it clobbers m_data */ m_move_pkthdr(n, m); n->m_len = 0; /* NB: m_gethdr does not set */ n->m_data += needed_space; /* * Pull up Ethernet header to create the expected layout. * We could use m_pullup but that's overkill (i.e. we don't * need the actual data) and it cannot fail so do it inline * for speed. */ /* NB: struct ether_header is known to be contiguous */ n->m_len += sizeof(struct ether_header); m->m_len -= sizeof(struct ether_header); m->m_data += sizeof(struct ether_header); /* * Replace the head of the chain. */ n->m_next = m; m = n; } return m; #undef TO_BE_RECLAIMED } /* * Return the transmit key to use in sending a unicast frame. * If a unicast key is set we use that. When no unicast key is set * we fall back to the default transmit key. */ static __inline struct ieee80211_key * ieee80211_crypto_getucastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } else { return &ni->ni_ucastkey; } } /* * Return the transmit key to use in sending a multicast frame. * Multicast traffic always uses the group key which is installed as * the default tx key. */ static __inline struct ieee80211_key * ieee80211_crypto_getmcastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } /* * Encapsulate an outbound data frame. The mbuf chain is updated. * If an error is encountered NULL is returned. The caller is required * to provide a node reference and pullup the ethernet header in the * first mbuf. * * NB: Packet is assumed to be processed by ieee80211_classify which * marked EAPOL frames w/ M_EAPOL. */ struct mbuf * ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)(wh)) struct ieee80211com *ic = ni->ni_ic; struct ether_header eh; struct ieee80211_frame *wh; struct ieee80211_key *key; struct llc *llc; int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr; ieee80211_seq seqno; /* * Copy existing Ethernet header to a safe place. The * rest of the code assumes it's ok to strip it when * reorganizing state for the final encapsulation. */ KASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); ETHER_HEADER_COPY(&eh, mtod(m, caddr_t)); /* * Insure space for additional headers. First identify * transmit key to use in calculating any buffer adjustments * required. This is also used below to do privacy * encapsulation work. Then calculate the 802.11 header * size and any padding required by the driver. * * Note key may be NULL if we fall back to the default * transmit key and that is not set. In that case the * buffer may not be expanded as needed by the cipher * routines, but they will/should discard it. */ if (vap->iv_flags & IEEE80211_F_PRIVACY) { if (vap->iv_opmode == IEEE80211_M_STA || !IEEE80211_IS_MULTICAST(eh.ether_dhost) || (vap->iv_opmode == IEEE80211_M_WDS && (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) key = ieee80211_crypto_getucastkey(vap, ni); else key = ieee80211_crypto_getmcastkey(vap, ni); if (key == NULL && (m->m_flags & M_EAPOL) == 0) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, eh.ether_dhost, "no default transmit key (%s) deftxkey %u", __func__, vap->iv_def_txkey); vap->iv_stats.is_tx_nodefkey++; goto bad; } } else key = NULL; /* * XXX Some ap's don't handle QoS-encapsulated EAPOL * frames so suppress use. This may be an issue if other * ap's require all data frames to be QoS-encapsulated * once negotiated in which case we'll need to make this * configurable. */ addqos = (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) && (m->m_flags & M_EAPOL) == 0; if (addqos) hdrsize = sizeof(struct ieee80211_qosframe); else hdrsize = sizeof(struct ieee80211_frame); /* * 4-address frames need to be generated for: * o packets sent through a WDS vap (IEEE80211_M_WDS) - * o packets relayed by a station operating with dynamic WDS - * (IEEE80211_M_STA+IEEE80211_F_DWDS and src address) + * o packets sent through a vap marked for relaying + * (e.g. a station operating with dynamic WDS) */ is4addr = vap->iv_opmode == IEEE80211_M_WDS || - (vap->iv_opmode == IEEE80211_M_STA && - (vap->iv_flags & IEEE80211_F_DWDS) && + ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) && !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)); if (is4addr) hdrsize += IEEE80211_ADDR_LEN; /* * Honor driver DATAPAD requirement. */ if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrspace = roundup(hdrsize, sizeof(uint32_t)); else hdrspace = hdrsize; if (__predict_true((m->m_flags & M_FF) == 0)) { /* * Normal frame. */ m = ieee80211_mbuf_adjust(vap, hdrspace, key, m); if (m == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ goto bad; } /* NB: this could be optimized 'cuz of ieee80211_mbuf_adjust */ m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); llc = mtod(m, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh.ether_type; } else { #ifdef IEEE80211_SUPPORT_SUPERG /* * Aggregated frame. */ m = ieee80211_ff_encap(vap, m, hdrspace, key); if (m == NULL) #endif goto bad; } datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ M_PREPEND(m, hdrspace, M_DONTWAIT); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; goto bad; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(uint16_t *)wh->i_dur = 0; if (is4addr) { wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); } else switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); /* * NB: always use the bssid from iv_bss as the * neighbor's may be stale after an ibss merge */ IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_bss->ni_bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); break; case IEEE80211_M_MONITOR: case IEEE80211_M_WDS: /* NB: is4addr should always be true */ goto bad; } if (m->m_flags & M_MORE_DATA) wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; if (addqos) { uint8_t *qos; int ac, tid; if (is4addr) { qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; } else qos = ((struct ieee80211_qosframe *) wh)->i_qos; ac = M_WME_GETAC(m); /* map from access class/queue to 11e header priorty value */ tid = WME_AC_TO_TID(ac); qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; qos[1] = 0; wh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; if ((m->m_flags & M_AMPDU_MPDU) == 0) { /* * NB: don't assign a sequence # to potential * aggregates; we expect this happens at the * point the frame comes off any aggregation q * as otherwise we may introduce holes in the * BA sequence space and/or make window accouting * more difficult. * * XXX may want to control this with a driver * capability; this may also change when we pull * aggregation up into net80211 */ seqno = ni->ni_txseqs[tid]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); } } else { seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); } /* check if xmit fragmentation is required */ txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold && !IEEE80211_IS_MULTICAST(wh->i_addr1) && (vap->iv_caps & IEEE80211_C_TXFRAG) && (m->m_flags & (M_FF | M_AMPDU_MPDU)) == 0); if (key != NULL) { /* * IEEE 802.1X: send EAPOL frames always in the clear. * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. */ if ((m->m_flags & M_EAPOL) == 0 || ((vap->iv_flags & IEEE80211_F_WPA) && (vap->iv_opmode == IEEE80211_M_STA ? !IEEE80211_KEY_UNDEFINED(key) : !IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)))) { wh->i_fc[1] |= IEEE80211_FC1_WEP; if (!ieee80211_crypto_enmic(vap, key, m, txfrag)) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, eh.ether_dhost, "%s", "enmic failed, discard frame"); vap->iv_stats.is_crypto_enmicfail++; goto bad; } } } if (txfrag && !ieee80211_fragment(vap, m, hdrsize, key != NULL ? key->wk_cipher->ic_header : 0, vap->iv_fragthreshold)) goto bad; m->m_flags |= M_ENCAP; /* mark encapsulated */ IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); return m; bad: if (m != NULL) m_freem(m); return NULL; #undef WH4 } /* * Fragment the frame according to the specified mtu. * The size of the 802.11 header (w/o padding) is provided * so we don't need to recalculate it. We create a new * mbuf for each fragment and chain it through m_nextpkt; * we might be able to optimize this by reusing the original * packet's mbufs but that is significantly more complicated. */ static int ieee80211_fragment(struct ieee80211vap *vap, struct mbuf *m0, u_int hdrsize, u_int ciphdrsize, u_int mtu) { struct ieee80211_frame *wh, *whf; struct mbuf *m, *prev, *next; u_int totalhdrsize, fragno, fragsize, off, remainder, payload; KASSERT(m0->m_nextpkt == NULL, ("mbuf already chained?")); KASSERT(m0->m_pkthdr.len > mtu, ("pktlen %u mtu %u", m0->m_pkthdr.len, mtu)); wh = mtod(m0, struct ieee80211_frame *); /* NB: mark the first frag; it will be propagated below */ wh->i_fc[1] |= IEEE80211_FC1_MORE_FRAG; totalhdrsize = hdrsize + ciphdrsize; fragno = 1; off = mtu - ciphdrsize; remainder = m0->m_pkthdr.len - off; prev = m0; do { fragsize = totalhdrsize + remainder; if (fragsize > mtu) fragsize = mtu; /* XXX fragsize can be >2048! */ KASSERT(fragsize < MCLBYTES, ("fragment size %u too big!", fragsize)); if (fragsize > MHLEN) m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); else m = m_gethdr(M_DONTWAIT, MT_DATA); if (m == NULL) goto bad; /* leave room to prepend any cipher header */ m_align(m, fragsize - ciphdrsize); /* * Form the header in the fragment. Note that since * we mark the first fragment with the MORE_FRAG bit * it automatically is propagated to each fragment; we * need only clear it on the last fragment (done below). */ whf = mtod(m, struct ieee80211_frame *); memcpy(whf, wh, hdrsize); *(uint16_t *)&whf->i_seq[0] |= htole16( (fragno & IEEE80211_SEQ_FRAG_MASK) << IEEE80211_SEQ_FRAG_SHIFT); fragno++; payload = fragsize - totalhdrsize; /* NB: destination is known to be contiguous */ m_copydata(m0, off, payload, mtod(m, uint8_t *) + hdrsize); m->m_len = hdrsize + payload; m->m_pkthdr.len = hdrsize + payload; m->m_flags |= M_FRAG; /* chain up the fragment */ prev->m_nextpkt = m; prev = m; /* deduct fragment just formed */ remainder -= payload; off += payload; } while (remainder != 0); /* set the last fragment */ m->m_flags |= M_LASTFRAG; whf->i_fc[1] &= ~IEEE80211_FC1_MORE_FRAG; /* strip first mbuf now that everything has been copied */ m_adj(m0, -(m0->m_pkthdr.len - (mtu - ciphdrsize))); m0->m_flags |= M_FIRSTFRAG | M_FRAG; vap->iv_stats.is_tx_fragframes++; vap->iv_stats.is_tx_frags += fragno-1; return 1; bad: /* reclaim fragments but leave original frame for caller to free */ for (m = m0->m_nextpkt; m != NULL; m = next) { next = m->m_nextpkt; m->m_nextpkt = NULL; /* XXX paranoid */ m_freem(m); } m0->m_nextpkt = NULL; return 0; } /* * Add a supported rates element id to a frame. */ static uint8_t * ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs) { int nrates; *frm++ = IEEE80211_ELEMID_RATES; nrates = rs->rs_nrates; if (nrates > IEEE80211_RATE_SIZE) nrates = IEEE80211_RATE_SIZE; *frm++ = nrates; memcpy(frm, rs->rs_rates, nrates); return frm + nrates; } /* * Add an extended supported rates element id to a frame. */ static uint8_t * ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs) { /* * Add an extended supported rates element if operating in 11g mode. */ if (rs->rs_nrates > IEEE80211_RATE_SIZE) { int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; *frm++ = IEEE80211_ELEMID_XRATES; *frm++ = nrates; memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); frm += nrates; } return frm; } /* * Add an ssid element to a frame. */ static uint8_t * ieee80211_add_ssid(uint8_t *frm, const uint8_t *ssid, u_int len) { *frm++ = IEEE80211_ELEMID_SSID; *frm++ = len; memcpy(frm, ssid, len); return frm + len; } /* * Add an erp element to a frame. */ static uint8_t * ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic) { uint8_t erp; *frm++ = IEEE80211_ELEMID_ERP; *frm++ = 1; erp = 0; if (ic->ic_nonerpsta != 0) erp |= IEEE80211_ERP_NON_ERP_PRESENT; if (ic->ic_flags & IEEE80211_F_USEPROT) erp |= IEEE80211_ERP_USE_PROTECTION; if (ic->ic_flags & IEEE80211_F_USEBARKER) erp |= IEEE80211_ERP_LONG_PREAMBLE; *frm++ = erp; return frm; } /* * Add a CFParams element to a frame. */ static uint8_t * ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic) { #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) *frm++ = IEEE80211_ELEMID_CFPARMS; *frm++ = 6; *frm++ = 0; /* CFP count */ *frm++ = 2; /* CFP period */ ADDSHORT(frm, 0); /* CFP MaxDuration (TU) */ ADDSHORT(frm, 0); /* CFP CurRemaining (TU) */ return frm; #undef ADDSHORT } static __inline uint8_t * add_appie(uint8_t *frm, const struct ieee80211_appie *ie) { memcpy(frm, ie->ie_data, ie->ie_len); return frm + ie->ie_len; } static __inline uint8_t * add_ie(uint8_t *frm, const uint8_t *ie) { memcpy(frm, ie, 2 + ie[1]); return frm + 2 + ie[1]; } #define WME_OUI_BYTES 0x00, 0x50, 0xf2 /* * Add a WME information element to a frame. */ static uint8_t * ieee80211_add_wme_info(uint8_t *frm, struct ieee80211_wme_state *wme) { static const struct ieee80211_wme_info info = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_info) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_INFO_OUI_SUBTYPE, .wme_version = WME_VERSION, .wme_info = 0, }; memcpy(frm, &info, sizeof(info)); return frm + sizeof(info); } /* * Add a WME parameters element to a frame. */ static uint8_t * ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme) { #define SM(_v, _f) (((_v) << _f##_S) & _f) #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) /* NB: this works 'cuz a param has an info at the front */ static const struct ieee80211_wme_info param = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_param) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_PARAM_OUI_SUBTYPE, .wme_version = WME_VERSION, }; int i; memcpy(frm, ¶m, sizeof(param)); frm += __offsetof(struct ieee80211_wme_info, wme_info); *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ *frm++ = 0; /* reserved field */ for (i = 0; i < WME_NUM_AC; i++) { const struct wmeParams *ac = &wme->wme_bssChanParams.cap_wmeParams[i]; *frm++ = SM(i, WME_PARAM_ACI) | SM(ac->wmep_acm, WME_PARAM_ACM) | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) ; *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) ; ADDSHORT(frm, ac->wmep_txopLimit); } return frm; #undef SM #undef ADDSHORT } #undef WME_OUI_BYTES /* * Add an 11h Power Constraint element to a frame. */ static uint8_t * ieee80211_add_powerconstraint(uint8_t *frm, struct ieee80211vap *vap) { const struct ieee80211_channel *c = vap->iv_bss->ni_chan; /* XXX per-vap tx power limit? */ int8_t limit = vap->iv_ic->ic_txpowlimit / 2; frm[0] = IEEE80211_ELEMID_PWRCNSTR; frm[1] = 1; frm[2] = c->ic_maxregpower > limit ? c->ic_maxregpower - limit : 0; return frm + 3; } /* * Add an 11h Power Capability element to a frame. */ static uint8_t * ieee80211_add_powercapability(uint8_t *frm, const struct ieee80211_channel *c) { frm[0] = IEEE80211_ELEMID_PWRCAP; frm[1] = 2; frm[2] = c->ic_minpower; frm[3] = c->ic_maxpower; return frm + 4; } /* * Add an 11h Supported Channels element to a frame. */ static uint8_t * ieee80211_add_supportedchannels(uint8_t *frm, struct ieee80211com *ic) { static const int ielen = 26; frm[0] = IEEE80211_ELEMID_SUPPCHAN; frm[1] = ielen; /* XXX not correct */ memcpy(frm+2, ic->ic_chan_avail, ielen); return frm + 2 + ielen; } /* * Add an 11h Channel Switch Announcement element to a frame. * Note that we use the per-vap CSA count to adjust the global * counter so we can use this routine to form probe response * frames and get the current count. */ static uint8_t * ieee80211_add_csa(uint8_t *frm, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) frm; csa->csa_ie = IEEE80211_ELEMID_CHANSWITCHANN; csa->csa_len = 3; csa->csa_mode = 1; /* XXX force quiet on channel */ csa->csa_newchan = ieee80211_chan2ieee(ic, ic->ic_csa_newchan); csa->csa_count = ic->ic_csa_count - vap->iv_csa_count; return frm + sizeof(*csa); } /* * Add an 11h country information element to a frame. */ static uint8_t * ieee80211_add_countryie(uint8_t *frm, struct ieee80211com *ic) { if (ic->ic_countryie == NULL || ic->ic_countryie_chan != ic->ic_bsschan) { /* * Handle lazy construction of ie. This is done on * first use and after a channel change that requires * re-calculation. */ if (ic->ic_countryie != NULL) free(ic->ic_countryie, M_80211_NODE_IE); ic->ic_countryie = ieee80211_alloc_countryie(ic); if (ic->ic_countryie == NULL) return frm; ic->ic_countryie_chan = ic->ic_bsschan; } return add_appie(frm, ic->ic_countryie); } /* * Send a probe request frame with the specified ssid * and any optional information element data. */ int ieee80211_send_probereq(struct ieee80211_node *ni, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t *ssid, size_t ssidlen) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; const struct ieee80211_txparam *tp; struct ieee80211_bpf_params params; struct ieee80211_frame *wh; const struct ieee80211_rateset *rs; struct mbuf *m; uint8_t *frm; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni, "block %s frame in CAC state", "probe request"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] RSN (optional) * [tlv] extended supported rates * [tlv] WPA (optional) * [tlv] user-specified ie's */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + sizeof(struct ieee80211_ie_wpa) + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + (vap->iv_appie_probereq != NULL ? vap->iv_appie_probereq->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } frm = ieee80211_add_ssid(frm, ssid, ssidlen); rs = ieee80211_get_suprates(ic, ic->ic_curchan); frm = ieee80211_add_rates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain? */ } if (vap->iv_appie_probereq != NULL) frm = add_appie(frm, vap->iv_appie_probereq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); KASSERT(M_LEADINGSPACE(m) >= sizeof(struct ieee80211_frame), ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, IEEE80211_NONQOS_TID, sa, da, bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_probereq); IEEE80211_NODE_STAT(ni, tx_mgmt); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe req on channel %u bssid %s ssid \"%.*s\"\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(bssid), ssidlen, ssid); memset(¶ms, 0, sizeof(params)); params.ibp_pri = M_WME_GETAC(m); tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; params.ibp_rate0 = tp->mgmtrate; if (IEEE80211_IS_MULTICAST(da)) { params.ibp_flags |= IEEE80211_BPF_NOACK; params.ibp_try0 = 1; } else params.ibp_try0 = tp->maxretry; params.ibp_power = ni->ni_txpower; return ic->ic_raw_xmit(ni, m, ¶ms); } /* * Calculate capability information for mgt frames. */ static uint16_t getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; uint16_t capinfo; KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("station mode")); if (vap->iv_opmode == IEEE80211_M_HOSTAP) capinfo = IEEE80211_CAPINFO_ESS; else if (vap->iv_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = 0; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if (IEEE80211_IS_CHAN_5GHZ(chan) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; return capinfo; } /* * Send a management frame. The node is for the destination (or ic_bss * when in station mode). Nodes other than ic_bss have their reference * count bumped to reflect our use for an indeterminant time. */ int ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg) { #define HTFLAGS (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT) #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node *bss = vap->iv_bss; struct ieee80211_bpf_params params; struct mbuf *m; uint8_t *frm; uint16_t capinfo; int has_challenge, is_shared_key, ret, status; KASSERT(ni != NULL, ("null node")); /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); memset(¶ms, 0, sizeof(params)); switch (type) { case IEEE80211_FC0_SUBTYPE_AUTH: status = arg >> 16; arg &= 0xffff; has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || arg == IEEE80211_AUTH_SHARED_RESPONSE) && ni->ni_challenge != NULL); /* * Deduce whether we're doing open authentication or * shared key authentication. We do the latter if * we're in the middle of a shared key authentication * handshake or if we're initiating an authentication * request and configured to use shared key. */ is_shared_key = has_challenge || arg >= IEEE80211_AUTH_SHARED_RESPONSE || (arg == IEEE80211_AUTH_SHARED_REQUEST && bss->ni_authmode == IEEE80211_AUTH_SHARED); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 3 * sizeof(uint16_t) + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? sizeof(uint16_t)+IEEE80211_CHALLENGE_LEN : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); ((uint16_t *)frm)[0] = (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) : htole16(IEEE80211_AUTH_ALG_OPEN); ((uint16_t *)frm)[1] = htole16(arg); /* sequence number */ ((uint16_t *)frm)[2] = htole16(status);/* status */ if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { ((uint16_t *)frm)[3] = htole16((IEEE80211_CHALLENGE_LEN << 8) | IEEE80211_ELEMID_CHALLENGE); memcpy(&((uint16_t *)frm)[4], ni->ni_challenge, IEEE80211_CHALLENGE_LEN); m->m_pkthdr.len = m->m_len = 4 * sizeof(uint16_t) + IEEE80211_CHALLENGE_LEN; if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "request encrypt frame (%s)", __func__); /* mark frame for encryption */ params.ibp_flags |= IEEE80211_BPF_CRYPTO; } } else m->m_pkthdr.len = m->m_len = 3 * sizeof(uint16_t); /* XXX not right for shared key */ if (status == IEEE80211_STATUS_SUCCESS) IEEE80211_NODE_STAT(ni, tx_auth); else IEEE80211_NODE_STAT(ni, tx_auth_fail); if (vap->iv_opmode == IEEE80211_M_STA) ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "send station deauthenticate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_deauth); IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); ieee80211_node_unauthorize(ni); /* port closed */ break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: /* * asreq frame format * [2] capability information * [2] listen interval * [6*] current AP address (reassoc only) * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [4] power capability (optional) * [28] supported channels (optional) * [tlv] HT capabilities * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Atheros capabilities (if negotiated) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + IEEE80211_ADDR_LEN + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + 4 + 2 + 26 + sizeof(struct ieee80211_wme_info) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htcap) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_wpa != NULL ? vap->iv_appie_wpa->ie_len : 0) + (vap->iv_appie_assocreq != NULL ? vap->iv_appie_assocreq->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode %u", vap->iv_opmode)); capinfo = IEEE80211_CAPINFO_ESS; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; /* * NB: Some 11a AP's reject the request when * short premable is set. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && (ic->ic_caps & IEEE80211_C_SHSLOT)) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if ((ni->ni_capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; *(uint16_t *)frm = htole16(capinfo); frm += 2; KASSERT(bss->ni_intval != 0, ("beacon interval is zero!")); *(uint16_t *)frm = htole16(howmany(ic->ic_lintval, bss->ni_intval)); frm += 2; if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { IEEE80211_ADDR_COPY(frm, bss->ni_bssid); frm += IEEE80211_ADDR_LEN; } frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, &ni->ni_rates); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } frm = ieee80211_add_xrates(frm, &ni->ni_rates); if (capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) { frm = ieee80211_add_powercapability(frm, ic->ic_curchan); frm = ieee80211_add_supportedchannels(frm, ic); } if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_HTCAP) frm = ieee80211_add_htcap(frm, ni); if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain */ } if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_info(frm, &ic->ic_wme); if ((vap->iv_flags_ext & IEEE80211_FEXT_HT) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_VENDOR) frm = ieee80211_add_htcap_vendor(frm, ni); #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) { frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); } #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocreq != NULL) frm = add_appie(frm, vap->iv_appie_assocreq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] HT capabilities (standard, if STA enabled) * [tlv] HT information (standard, if STA enabled) * [tlv] WME (if configured and STA enabled) * [tlv] HT capabilities (vendor OUI, if STA enabled) * [tlv] HT information (vendor OUI, if STA enabled) * [tlv] Atheros capabilities (if STA enabled) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) + 4 + sizeof(struct ieee80211_wme_param) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_assocresp != NULL ? vap->iv_appie_assocresp->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); capinfo = getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; *(uint16_t *)frm = htole16(arg); /* status */ frm += 2; if (arg == IEEE80211_STATUS_SUCCESS) { *(uint16_t *)frm = htole16(ni->ni_associd); IEEE80211_NODE_STAT(ni, tx_assoc); } else IEEE80211_NODE_STAT(ni, tx_assoc_fail); frm += 2; frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_xrates(frm, &ni->ni_rates); /* NB: respond according to what we received */ if ((ni->ni_flags & HTFLAGS) == IEEE80211_NODE_HT) { frm = ieee80211_add_htcap(frm, ni); frm = ieee80211_add_htinfo(frm, ni); } if ((vap->iv_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if ((ni->ni_flags & HTFLAGS) == HTFLAGS) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocresp != NULL) frm = add_appie(frm, vap->iv_appie_assocresp); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); break; case IEEE80211_FC0_SUBTYPE_DISASSOC: IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "send station disassociate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_disassoc); IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); break; default: IEEE80211_NOTE(vap, IEEE80211_MSG_ANY, ni, "invalid mgmt frame type %u", type); senderr(EINVAL, is_tx_unknownmgt); /* NOTREACHED */ } /* NB: force non-ProbeResp frames to the highest queue */ params.ibp_pri = WME_AC_VO; params.ibp_rate0 = bss->ni_txparms->mgmtrate; /* NB: we know all frames are unicast */ params.ibp_try0 = bss->ni_txparms->maxretry; params.ibp_power = bss->ni_txpower; return ieee80211_mgmt_output(ni, m, type, ¶ms); bad: ieee80211_free_node(ni); return ret; #undef senderr #undef HTFLAGS } /* * Return an mbuf with a probe response frame in it. * Space is left to prepend and 802.11 header at the * front but it's left to the caller to fill in. */ struct mbuf * ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy) { struct ieee80211vap *vap = bss->ni_vap; struct ieee80211com *ic = bss->ni_ic; const struct ieee80211_rateset *rs; struct mbuf *m; uint16_t capinfo; uint8_t *frm; /* * probe response frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [tlv] parameter set (FH/DS) * [tlv] parameter set (IBSS) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN (optional) * [tlv] HT capabilities * [tlv] HT information * [tlv] WPA (optional) * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 8 + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 7 /* max(7,3) */ + IEEE80211_COUNTRY_MAX_SIZE + 3 + sizeof(struct ieee80211_csa_ie) + 3 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_ie_htcap) + sizeof(struct ieee80211_ie_htinfo) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_wme_param) + 4 + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_proberesp != NULL ? vap->iv_appie_proberesp->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; return NULL; } memset(frm, 0, 8); /* timestamp should be filled later */ frm += 8; *(uint16_t *)frm = htole16(bss->ni_intval); frm += 2; capinfo = getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; frm = ieee80211_add_ssid(frm, bss->ni_essid, bss->ni_esslen); rs = ieee80211_get_suprates(ic, bss->ni_chan); frm = ieee80211_add_rates(frm, rs); if (IEEE80211_IS_CHAN_FHSS(bss->ni_chan)) { *frm++ = IEEE80211_ELEMID_FHPARMS; *frm++ = 5; *frm++ = bss->ni_fhdwell & 0x00ff; *frm++ = (bss->ni_fhdwell >> 8) & 0x00ff; *frm++ = IEEE80211_FH_CHANSET( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = IEEE80211_FH_CHANPAT( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = bss->ni_fhindex; } else { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, bss->ni_chan); } if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ } if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(bss->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } if (IEEE80211_IS_CHAN_ANYG(bss->ni_chan)) frm = ieee80211_add_erp(frm, ic); frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain? */ } /* * NB: legacy 11b clients do not get certain ie's. * The caller identifies such clients by passing * a token in legacy to us. Could expand this to be * any legacy client for stuff like HT ie's. */ if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap(frm, bss); frm = ieee80211_add_htinfo(frm, bss); } if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain? */ } if (vap->iv_flags & IEEE80211_F_WME) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap_vendor(frm, bss); frm = ieee80211_add_htinfo_vendor(frm, bss); } #ifdef IEEE80211_SUPPORT_SUPERG if ((vap->iv_flags & IEEE80211_F_ATHEROS) && legacy != IEEE80211_SEND_LEGACY_11B) frm = ieee80211_add_athcaps(frm, bss); #endif if (vap->iv_appie_proberesp != NULL) frm = add_appie(frm, vap->iv_appie_proberesp); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return m; } /* * Send a probe response frame to the specified mac address. * This does not go through the normal mgt frame api so we * can specify the destination address and re-use the bss node * for the sta reference. */ int ieee80211_send_proberesp(struct ieee80211vap *vap, const uint8_t da[IEEE80211_ADDR_LEN], int legacy) { struct ieee80211_node *bss = vap->iv_bss; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_frame *wh; struct mbuf *m; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, bss, "block %s frame in CAC state", "probe response"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, bss, ether_sprintf(bss->ni_macaddr), ieee80211_node_refcnt(bss)+1); ieee80211_ref_node(bss); m = ieee80211_alloc_proberesp(bss, legacy); if (m == NULL) { ieee80211_free_node(bss); return ENOMEM; } M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); KASSERT(m != NULL, ("no room for header")); wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(bss, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP, IEEE80211_NONQOS_TID, vap->iv_myaddr, da, bss->ni_bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe resp on channel %u to %s%s\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(da), legacy ? " " : ""); IEEE80211_NODE_STAT(bss, tx_mgmt); return ic->ic_raw_xmit(bss, m, NULL); } /* * Allocate and build a RTS (Request To Send) control frame. */ struct mbuf * ieee80211_alloc_rts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], const uint8_t ta[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_rts *rts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_DONTWAIT, MT_DATA); if (m != NULL) { rts = mtod(m, struct ieee80211_frame_rts *); rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)rts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(rts->i_ra, ra); IEEE80211_ADDR_COPY(rts->i_ta, ta); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); } return m; } /* * Allocate and build a CTS (Clear To Send) control frame. */ struct mbuf * ieee80211_alloc_cts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_cts *cts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_DONTWAIT, MT_DATA); if (m != NULL) { cts = mtod(m, struct ieee80211_frame_cts *); cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)cts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(cts->i_ra, ra); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); } return m; } static void ieee80211_tx_mgt_timeout(void *arg) { struct ieee80211_node *ni = arg; struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_state != IEEE80211_S_INIT && (vap->iv_ic->ic_flags & IEEE80211_F_SCAN) == 0) { /* * NB: it's safe to specify a timeout as the reason here; * it'll only be used in the right state. */ ieee80211_new_state(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_TIMEOUT); } } static void ieee80211_tx_mgt_cb(struct ieee80211_node *ni, void *arg, int status) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_state ostate = (enum ieee80211_state) arg; /* * Frame transmit completed; arrange timer callback. If * transmit was successfuly we wait for response. Otherwise * we arrange an immediate callback instead of doing the * callback directly since we don't know what state the driver * is in (e.g. what locks it is holding). This work should * not be too time-critical and not happen too often so the * added overhead is acceptable. * * XXX what happens if !acked but response shows up before callback? */ if (vap->iv_state == ostate) callout_reset(&vap->iv_mgtsend, status == 0 ? IEEE80211_TRANS_WAIT*hz : 0, ieee80211_tx_mgt_timeout, ni); } static void ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm, struct ieee80211_beacon_offsets *bo, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_rateset *rs = &ni->ni_rates; uint16_t capinfo; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities (optional) * [tlv] TDMA parameters (optional) * [tlv] application data (optional) */ memset(bo, 0, sizeof(*bo)); memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ frm += 8; *(uint16_t *)frm = htole16(ni->ni_intval); frm += 2; capinfo = getcapinfo(vap, ni->ni_chan); bo->bo_caps = (uint16_t *)frm; *(uint16_t *)frm = htole16(capinfo); frm += 2; *frm++ = IEEE80211_ELEMID_SSID; if ((vap->iv_flags & IEEE80211_F_HIDESSID) == 0) { *frm++ = ni->ni_esslen; memcpy(frm, ni->ni_essid, ni->ni_esslen); frm += ni->ni_esslen; } else *frm++ = 0; frm = ieee80211_add_rates(frm, rs); if (!IEEE80211_IS_CHAN_FHSS(ni->ni_chan)) { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); } if (ic->ic_flags & IEEE80211_F_PCF) { bo->bo_cfp = frm; frm = ieee80211_add_cfparms(frm, ic); } bo->bo_tim = frm; if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ bo->bo_tim_len = 0; } else if (vap->iv_opmode == IEEE80211_M_HOSTAP) { struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; tie->tim_ie = IEEE80211_ELEMID_TIM; tie->tim_len = 4; /* length */ tie->tim_count = 0; /* DTIM count */ tie->tim_period = vap->iv_dtim_period; /* DTIM period */ tie->tim_bitctl = 0; /* bitmap control */ tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ frm += sizeof(struct ieee80211_tim_ie); bo->bo_tim_len = 1; } bo->bo_tim_trailer = frm; if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); bo->bo_csa = frm; if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } else bo->bo_csa = frm; if (IEEE80211_IS_CHAN_ANYG(ni->ni_chan)) { bo->bo_erp = frm; frm = ieee80211_add_erp(frm, ic); } frm = ieee80211_add_xrates(frm, rs); if (vap->iv_flags & IEEE80211_F_WPA2) { if (vap->iv_rsn_ie != NULL) frm = add_ie(frm, vap->iv_rsn_ie); /* XXX else complain */ } if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { frm = ieee80211_add_htcap(frm, ni); bo->bo_htinfo = frm; frm = ieee80211_add_htinfo(frm, ni); } if (vap->iv_flags & IEEE80211_F_WPA1) { if (vap->iv_wpa_ie != NULL) frm = add_ie(frm, vap->iv_wpa_ie); /* XXX else complain */ } if (vap->iv_flags & IEEE80211_F_WME) { bo->bo_wme = frm; frm = ieee80211_add_wme_param(frm, &ic->ic_wme); } if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT)) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_ATHEROS) { bo->bo_ath = frm; frm = ieee80211_add_athcaps(frm, ni); } #endif #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { bo->bo_tdma = frm; frm = ieee80211_add_tdma(frm, vap); } #endif if (vap->iv_appie_beacon != NULL) { bo->bo_appie = frm; bo->bo_appie_len = vap->iv_appie_beacon->ie_len; frm = add_appie(frm, vap->iv_appie_beacon); } bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer; bo->bo_csa_trailer_len = frm - bo->bo_csa; m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); } /* * Allocate a beacon frame and fillin the appropriate bits. */ struct mbuf * ieee80211_beacon_alloc(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct mbuf *m; int pktlen; uint8_t *frm; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] TDMA parameters (optional) * [tlv] application data (optional) * NB: we allocate the max space required for the TIM bitmap. * XXX how big is this? */ pktlen = 8 /* time stamp */ + sizeof(uint16_t) /* beacon interval */ + sizeof(uint16_t) /* capabilities */ + 2 + ni->ni_esslen /* ssid */ + 2 + IEEE80211_RATE_SIZE /* supported rates */ + 2 + 1 /* DS parameters */ + 2 + 6 /* CF parameters */ + 2 + 4 + vap->iv_tim_len /* DTIM/IBSSPARMS */ + IEEE80211_COUNTRY_MAX_SIZE /* country */ + 2 + 1 /* power control */ + sizeof(struct ieee80211_csa_ie) /* CSA */ + 2 + 1 /* ERP */ + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + (vap->iv_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 2*sizeof(struct ieee80211_ie_wpa) : 0) /* XXX conditional? */ + 4+2*sizeof(struct ieee80211_ie_htcap)/* HT caps */ + 4+2*sizeof(struct ieee80211_ie_htinfo)/* HT info */ + (vap->iv_caps & IEEE80211_C_WME ? /* WME */ sizeof(struct ieee80211_wme_param) : 0) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) /* ATH */ #endif #ifdef IEEE80211_SUPPORT_TDMA + (vap->iv_caps & IEEE80211_C_TDMA ? /* TDMA */ sizeof(struct ieee80211_tdma_param) : 0) #endif + IEEE80211_MAX_APPIE ; m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), pktlen); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY, "%s: cannot get buf; size %u\n", __func__, pktlen); vap->iv_stats.is_tx_nobuf++; return NULL; } ieee80211_beacon_construct(m, frm, bo, ni); M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); KASSERT(m != NULL, ("no space for 802.11 header?")); wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(uint16_t *)wh->i_dur = 0; IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); *(uint16_t *)wh->i_seq = 0; return m; } /* * Update the dynamic parts of a beacon frame based on the current state. */ int ieee80211_beacon_update(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo, struct mbuf *m, int mcast) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int len_changed = 0; uint16_t capinfo; IEEE80211_LOCK(ic); /* * Handle 11h channel change when we've reached the count. * We must recalculate the beacon frame contents to account * for the new channel. Note we do this only for the first * vap that reaches this point; subsequent vaps just update * their beacon state to reflect the recalculated channel. */ if (isset(bo->bo_flags, IEEE80211_BEACON_CSA) && vap->iv_csa_count == ic->ic_csa_count) { vap->iv_csa_count = 0; /* * Effect channel change before reconstructing the beacon * frame contents as many places reference ni_chan. */ if (ic->ic_csa_newchan != NULL) ieee80211_csa_completeswitch(ic); /* * NB: ieee80211_beacon_construct clears all pending * updates in bo_flags so we don't need to explicitly * clear IEEE80211_BEACON_CSA. */ ieee80211_beacon_construct(m, mtod(m, uint8_t*) + sizeof(struct ieee80211_frame), bo, ni); /* XXX do WME aggressive mode processing? */ IEEE80211_UNLOCK(ic); return 1; /* just assume length changed */ } /* XXX faster to recalculate entirely or just changes? */ capinfo = getcapinfo(vap, ni->ni_chan); *bo->bo_caps = htole16(capinfo); if (vap->iv_flags & IEEE80211_F_WME) { struct ieee80211_wme_state *wme = &ic->ic_wme; /* * Check for agressive mode change. When there is * significant high priority traffic in the BSS * throttle back BE traffic by using conservative * parameters. Otherwise BE uses agressive params * to optimize performance of legacy/non-QoS traffic. */ if (wme->wme_flags & WME_F_AGGRMODE) { if (wme->wme_hipri_traffic > wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, disable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags &= ~WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } else wme->wme_hipri_traffic = 0; } else { if (wme->wme_hipri_traffic <= wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, enable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags |= WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = 0; } else wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } if (isset(bo->bo_flags, IEEE80211_BEACON_WME)) { (void) ieee80211_add_wme_param(bo->bo_wme, wme); clrbit(bo->bo_flags, IEEE80211_BEACON_WME); } } if (isset(bo->bo_flags, IEEE80211_BEACON_HTINFO)) { ieee80211_ht_update_beacon(vap, bo); clrbit(bo->bo_flags, IEEE80211_BEACON_HTINFO); } #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { /* * NB: the beacon is potentially updated every TBTT. */ ieee80211_tdma_update_beacon(vap, bo); } #endif if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* NB: no IBSS support*/ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) bo->bo_tim; if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) { u_int timlen, timoff, i; /* * ATIM/DTIM needs updating. If it fits in the * current space allocated then just copy in the * new bits. Otherwise we need to move any trailing * data to make room. Note that we know there is * contiguous space because ieee80211_beacon_allocate * insures there is space in the mbuf to write a * maximal-size virtual bitmap (based on iv_max_aid). */ /* * Calculate the bitmap size and offset, copy any * trailer out of the way, and then copy in the * new bitmap and update the information element. * Note that the tim bitmap must contain at least * one byte and any offset must be even. */ if (vap->iv_ps_pending != 0) { timoff = 128; /* impossibly large */ for (i = 0; i < vap->iv_tim_len; i++) if (vap->iv_tim_bitmap[i]) { timoff = i &~ 1; break; } KASSERT(timoff != 128, ("tim bitmap empty!")); for (i = vap->iv_tim_len-1; i >= timoff; i--) if (vap->iv_tim_bitmap[i]) break; timlen = 1 + (i - timoff); } else { timoff = 0; timlen = 1; } if (timlen != bo->bo_tim_len) { /* copy up/down trailer */ int adjust = tie->tim_bitmap+timlen - bo->bo_tim_trailer; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_erp += adjust; bo->bo_htinfo += adjust; #ifdef IEEE80211_SUPERG_SUPPORT bo->bo_ath += adjust; #endif #ifdef IEEE80211_TDMA_SUPPORT bo->bo_tdma += adjust; #endif bo->bo_appie += adjust; bo->bo_wme += adjust; bo->bo_csa += adjust; bo->bo_tim_len = timlen; /* update information element */ tie->tim_len = 3 + timlen; tie->tim_bitctl = timoff; len_changed = 1; } memcpy(tie->tim_bitmap, vap->iv_tim_bitmap + timoff, bo->bo_tim_len); clrbit(bo->bo_flags, IEEE80211_BEACON_TIM); IEEE80211_DPRINTF(vap, IEEE80211_MSG_POWER, "%s: TIM updated, pending %u, off %u, len %u\n", __func__, vap->iv_ps_pending, timoff, timlen); } /* count down DTIM period */ if (tie->tim_count == 0) tie->tim_count = tie->tim_period - 1; else tie->tim_count--; /* update state for buffered multicast frames on DTIM */ if (mcast && tie->tim_count == 0) tie->tim_bitctl |= 1; else tie->tim_bitctl &= ~1; if (isset(bo->bo_flags, IEEE80211_BEACON_CSA)) { struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) bo->bo_csa; /* * Insert or update CSA ie. If we're just starting * to count down to the channel switch then we need * to insert the CSA ie. Otherwise we just need to * drop the count. The actual change happens above * when the vap's count reaches the target count. */ if (vap->iv_csa_count == 0) { memmove(&csa[1], csa, bo->bo_csa_trailer_len); bo->bo_erp += sizeof(*csa); bo->bo_htinfo += sizeof(*csa); bo->bo_wme += sizeof(*csa); #ifdef IEEE80211_SUPERG_SUPPORT bo->bo_ath += sizeof(*csa); #endif #ifdef IEEE80211_TDMA_SUPPORT bo->bo_tdma += sizeof(*csa); #endif bo->bo_appie += sizeof(*csa); bo->bo_csa_trailer_len += sizeof(*csa); bo->bo_tim_trailer_len += sizeof(*csa); m->m_len += sizeof(*csa); m->m_pkthdr.len += sizeof(*csa); ieee80211_add_csa(bo->bo_csa, vap); } else csa->csa_count--; vap->iv_csa_count++; /* NB: don't clear IEEE80211_BEACON_CSA */ } if (isset(bo->bo_flags, IEEE80211_BEACON_ERP)) { /* * ERP element needs updating. */ (void) ieee80211_add_erp(bo->bo_erp, ic); clrbit(bo->bo_flags, IEEE80211_BEACON_ERP); } #ifdef IEEE80211_SUPPORT_SUPERG if (isset(bo->bo_flags, IEEE80211_BEACON_ATH)) { ieee80211_add_athcaps(bo->bo_ath, ni); clrbit(bo->bo_flags, IEEE80211_BEACON_ATH); } #endif } if (isset(bo->bo_flags, IEEE80211_BEACON_APPIE)) { const struct ieee80211_appie *aie = vap->iv_appie_beacon; int aielen; uint8_t *frm; aielen = 0; if (aie != NULL) aielen += aie->ie_len; if (aielen != bo->bo_appie_len) { /* copy up/down trailer */ int adjust = aielen - bo->bo_appie_len; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_appie += adjust; bo->bo_appie_len = aielen; len_changed = 1; } frm = bo->bo_appie; if (aie != NULL) frm = add_appie(frm, aie); clrbit(bo->bo_flags, IEEE80211_BEACON_APPIE); } IEEE80211_UNLOCK(ic); return len_changed; } Index: head/sys/net80211/ieee80211_var.h =================================================================== --- head/sys/net80211/ieee80211_var.h (revision 191554) +++ head/sys/net80211/ieee80211_var.h (revision 191555) @@ -1,830 +1,831 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ /* NB: portability glue must go first */ #ifdef __NetBSD__ #include #elif __FreeBSD__ #include #elif __linux__ #include #else #error "No support for your operating system!" #endif #include #include #include #include #include /* for ieee80211_stats */ #include #include #include #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE 0xff #define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) /* * 802.11 control state is split into a common portion that maps * 1-1 to a physical device and one or more "Virtual AP's" (VAP) * that are bound to an ieee80211com instance and share a single * underlying device. Each VAP has a corresponding OS device * entity through which traffic flows and that applications use * for issuing ioctls, etc. */ /* * Data common to one or more virtual AP's. State shared by * the underlying device and the net80211 layer is exposed here; * e.g. device-specific callbacks. */ struct ieee80211vap; typedef void (*ieee80211vap_attach)(struct ieee80211vap *); struct ieee80211_appie { uint16_t ie_len; /* size of ie_data */ uint8_t ie_data[]; /* user-specified IE's */ }; struct ieee80211_tdma_param; struct ieee80211_rate_table; struct ieee80211_tx_ampdu; struct ieee80211_rx_ampdu; struct ieee80211_stageq { struct mbuf *head; /* frames linked w/ m_nextpkt */ struct mbuf *tail; /* last frame in queue */ int depth; /* # items on head */ }; struct ieee80211com { struct ifnet *ic_ifp; /* associated device */ ieee80211_com_lock_t ic_comlock; /* state update lock */ TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */ int ic_headroom; /* driver tx headroom needs */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ struct ifmedia ic_media; /* interface media config */ struct callout ic_inact; /* inactivity processing */ struct task ic_parent_task; /* deferred parent processing */ uint32_t ic_flags; /* state flags */ uint32_t ic_flags_ext; /* extended state flags */ uint32_t ic_flags_ven; /* vendor state flags */ uint32_t ic_caps; /* capabilities */ uint32_t ic_htcaps; /* HT capabilities */ uint32_t ic_cryptocaps; /* crypto capabilities */ uint8_t ic_modecaps[2]; /* set of mode capabilities */ uint8_t ic_promisc; /* vap's needing promisc mode */ uint8_t ic_allmulti; /* vap's needing all multicast*/ uint8_t ic_nrunning; /* vap's marked running */ uint8_t ic_curmode; /* current mode */ uint16_t ic_bintval; /* beacon interval */ uint16_t ic_lintval; /* listen interval */ uint16_t ic_holdover; /* PM hold over duration */ uint16_t ic_txpowlimit; /* global tx power limit */ struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ int ic_nchans; /* # entries in ic_channels */ struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_channel *ic_curchan; /* current channel */ const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */ struct ieee80211_channel *ic_bsschan; /* bss channel */ struct ieee80211_channel *ic_prevchan; /* previous channel */ struct ieee80211_regdomain ic_regdomain;/* regulatory data */ struct ieee80211_appie *ic_countryie; /* calculated country ie */ struct ieee80211_channel *ic_countryie_chan; /* 802.11h/DFS state */ struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */ int ic_csa_count; /* count for doing CSA */ struct ieee80211_dfs_state ic_dfs; /* DFS state */ struct ieee80211_scan_state *ic_scan; /* scan state */ int ic_lastdata; /* time of last data frame */ int ic_lastscan; /* time last scan completed */ /* NB: this is the union of all vap stations/neighbors */ int ic_max_keyix; /* max h/w key index */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ /* XXX multi-bss: split out common/vap parts */ struct ieee80211_wme_state ic_wme; /* WME/WMM state */ /* XXX multi-bss: can per-vap be done/make sense? */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ uint16_t ic_nonerpsta; /* # non-ERP stations */ uint16_t ic_longslotsta; /* # long slot time stations */ uint16_t ic_sta_assoc; /* stations associated */ uint16_t ic_ht_sta_assoc;/* HT stations associated */ uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ uint8_t ic_curhtprotmode;/* HTINFO bss state */ enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ int ic_lastnonerp; /* last time non-ERP sta noted*/ int ic_lastnonht; /* last time non-HT sta noted */ /* fast-frames staging q */ struct ieee80211_stageq ic_ff_stageq[WME_NUM_AC]; int ic_stageqdepth; /* cumulative depth */ /* virtual ap create/delete */ struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *, const char name[IFNAMSIZ], int unit, int opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t macaddr[IEEE80211_ADDR_LEN]); void (*ic_vap_delete)(struct ieee80211vap *); /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; /* return hardware/radio capabilities */ void (*ic_getradiocaps)(struct ieee80211com *, int, int *, struct ieee80211_channel []); /* check and/or prepare regdomain state change */ int (*ic_setregdomain)(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); /* send/recv 802.11 management frame */ int (*ic_send_mgmt)(struct ieee80211_node *, int, int); /* send raw 802.11 frame */ int (*ic_raw_xmit)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); /* update device state for 802.11 slot time change */ void (*ic_updateslot)(struct ifnet *); /* handle multicast state changes */ void (*ic_update_mcast)(struct ifnet *); /* handle promiscuous mode changes */ void (*ic_update_promisc)(struct ifnet *); /* new station association callback/notification */ void (*ic_newassoc)(struct ieee80211_node *, int); /* TDMA update notification */ void (*ic_tdma_update)(struct ieee80211_node *, const struct ieee80211_tdma_param *, int); /* node state management */ struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); void (*ic_node_age)(struct ieee80211_node *); void (*ic_node_drain)(struct ieee80211_node *); int8_t (*ic_node_getrssi)(const struct ieee80211_node*); void (*ic_node_getsignal)(const struct ieee80211_node*, int8_t *, int8_t *); void (*ic_node_getmimoinfo)( const struct ieee80211_node*, struct ieee80211_mimo_info *); /* scanning support */ void (*ic_scan_start)(struct ieee80211com *); void (*ic_scan_end)(struct ieee80211com *); void (*ic_set_channel)(struct ieee80211com *); void (*ic_scan_curchan)(struct ieee80211_scan_state *, unsigned long); void (*ic_scan_mindwell)(struct ieee80211_scan_state *); /* * 802.11n ADDBA support. A simple/generic implementation * of A-MPDU tx aggregation is provided; the driver may * override these methods to provide their own support. * A-MPDU rx re-ordering happens automatically if the * driver passes out-of-order frames to ieee80211_input * from an assocated HT station. */ void (*ic_recv_action)(struct ieee80211_node *, const uint8_t *frm, const uint8_t *efrm); int (*ic_send_action)(struct ieee80211_node *, int category, int action, uint16_t args[4]); /* check if A-MPDU should be enabled this station+ac */ int (*ic_ampdu_enable)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* start/stop doing A-MPDU tx aggregation for a station */ int (*ic_addba_request)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); int (*ic_addba_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); void (*ic_addba_stop)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* BAR response received */ void (*ic_bar_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status); /* start/stop doing A-MPDU rx processing for a station */ int (*ic_ampdu_rx_start)(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); void (*ic_ampdu_rx_stop)(struct ieee80211_node *, struct ieee80211_rx_ampdu *); }; struct ieee80211_aclator; struct ieee80211_tdma_state; struct ieee80211vap { struct ifmedia iv_media; /* interface media config */ struct ifnet *iv_ifp; /* associated device */ struct bpf_if *iv_rawbpf; /* packet filter structure */ struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */ struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */ TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */ struct ieee80211com *iv_ic; /* back ptr to common state */ uint32_t iv_debug; /* debug msg flags */ struct ieee80211_stats iv_stats; /* statistics */ uint8_t iv_myaddr[IEEE80211_ADDR_LEN]; uint32_t iv_flags; /* state flags */ uint32_t iv_flags_ext; /* extended state flags */ uint32_t iv_flags_ven; /* vendor state flags */ uint32_t iv_caps; /* capabilities */ uint32_t iv_htcaps; /* HT capabilities */ enum ieee80211_opmode iv_opmode; /* operation mode */ enum ieee80211_state iv_state; /* state machine state */ void (*iv_newstate_cb)(struct ieee80211vap *, enum ieee80211_state, int); struct callout iv_mgtsend; /* mgmt frame response timer */ /* inactivity timer settings */ int iv_inact_init; /* setting for new station */ int iv_inact_auth; /* auth but not assoc setting */ int iv_inact_run; /* authorized setting */ int iv_inact_probe; /* inactive probe time */ int iv_des_nssid; /* # desired ssids */ struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */ uint8_t iv_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_channel *iv_des_chan; /* desired channel */ uint16_t iv_des_mode; /* desired mode */ int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; u_int iv_bgscanidle; /* bg scan idle threshold */ u_int iv_bgscanintvl; /* bg scan min interval */ u_int iv_scanvalid; /* scan cache valid threshold */ u_int iv_scanreq_duration; u_int iv_scanreq_mindwell; u_int iv_scanreq_maxdwell; uint16_t iv_scanreq_flags;/* held scan request params */ uint8_t iv_scanreq_nssid; struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID]; /* sta-mode roaming state */ enum ieee80211_roamingmode iv_roaming; /* roaming mode */ struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX]; uint8_t iv_bmissthreshold; uint8_t iv_bmiss_count; /* current beacon miss count */ int iv_bmiss_max; /* max bmiss before scan */ uint16_t iv_swbmiss_count;/* beacons in last period */ uint16_t iv_swbmiss_period;/* s/w bmiss period */ struct callout iv_swbmiss; /* s/w beacon miss timer */ int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ int iv_ampdu_density;/* A-MPDU density */ int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */ int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */ u_int iv_ampdu_mintraffic[WME_NUM_AC]; uint32_t *iv_aid_bitmap; /* association id map */ uint16_t iv_max_aid; uint16_t iv_sta_assoc; /* stations associated */ uint16_t iv_ps_sta; /* stations in power save */ uint16_t iv_ps_pending; /* ps sta's w/ pending frames */ uint16_t iv_txseq; /* mcast xmit seq# space */ uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */ uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/ uint8_t iv_dtim_period; /* DTIM period */ uint8_t iv_dtim_count; /* DTIM count from last bcn */ /* set/unset aid pwrsav state */ int iv_csa_count; /* count for doing CSA */ struct ieee80211_node *iv_bss; /* information for this node */ struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX]; uint16_t iv_rtsthreshold; uint16_t iv_fragthreshold; int iv_inact_timer; /* inactivity timer wait */ /* application-specified IE's to attach to mgt frames */ struct ieee80211_appie *iv_appie_beacon; struct ieee80211_appie *iv_appie_probereq; struct ieee80211_appie *iv_appie_proberesp; struct ieee80211_appie *iv_appie_assocreq; struct ieee80211_appie *iv_appie_assocresp; struct ieee80211_appie *iv_appie_wpa; uint8_t *iv_wpa_ie; uint8_t *iv_rsn_ie; uint16_t iv_max_keyix; /* max h/w key index */ ieee80211_keyix iv_def_txkey; /* default/group tx key index */ struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID]; int (*iv_key_alloc)(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *); int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); void (*iv_key_update_begin)(struct ieee80211vap *); void (*iv_key_update_end)(struct ieee80211vap *); const struct ieee80211_authenticator *iv_auth; /* authenticator glue */ void *iv_ec; /* private auth state */ const struct ieee80211_aclator *iv_acl; /* acl glue */ void *iv_as; /* private aclator state */ struct ieee80211_tdma_state *iv_tdma; /* tdma state */ /* operate-mode detach hook */ void (*iv_opdetach)(struct ieee80211vap *); /* receive processing */ int (*iv_input)(struct ieee80211_node *, struct mbuf *, int rssi, int noise, uint32_t rstamp); void (*iv_recv_mgmt)(struct ieee80211_node *, struct mbuf *, int, int, int, uint32_t); void (*iv_recv_ctl)(struct ieee80211_node *, struct mbuf *, int); void (*iv_deliver_data)(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); #if 0 /* send processing */ int (*iv_send_mgmt)(struct ieee80211_node *, int, int); #endif /* beacon miss processing */ void (*iv_bmiss)(struct ieee80211vap *); /* reset device state after 802.11 parameter/state change */ int (*iv_reset)(struct ieee80211vap *, u_long); /* [schedule] beacon frame update */ void (*iv_update_beacon)(struct ieee80211vap *, int); /* power save handling */ void (*iv_update_ps)(struct ieee80211vap *, int); int (*iv_set_tim)(struct ieee80211_node *, int); /* state machine processing */ int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); /* 802.3 output method for raw frame xmit */ int (*iv_output)(struct ifnet *, struct mbuf *, struct sockaddr *, struct route *); }; MALLOC_DECLARE(M_80211_VAP); #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags/iv_flags */ #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */ #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ #define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */ #define IEEE80211_F_BITS \ "\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \ "\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \ "\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \ "\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \ "\37DOTH\40DWDS" /* Atheros protocol-specific flags */ #define IEEE80211_F_ATHEROS \ (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) /* Check if an Atheros capability was negotiated for use */ #define IEEE80211_ATH_CAP(vap, ni, bit) \ ((vap)->iv_flags & (ni)->ni_ath_flags & (bit)) /* ic_flags_ext/iv_flags_ext */ #define IEEE80211_FEXT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ #define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ #define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */ #define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */ #define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */ #define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */ +#define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */ #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ #define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */ #define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */ /* NB: immutable: should be set only when creating a vap */ #define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */ #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ #define IEEE80211_FEXT_HT 0x00080000 /* CONF: HT supported */ #define IEEE80211_FEXT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FEXT_AMPDU_RX 0x00200000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FEXT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FEXT_AMSDU_RX 0x00800000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FEXT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ #define IEEE80211_FEXT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ #define IEEE80211_FEXT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ #define IEEE80211_FEXT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ #define IEEE80211_FEXT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ #define IEEE80211_FEXT_RIFS 0x20000000 /* CONF: RIFS enabled */ #define IEEE80211_FEXT_BITS \ "\20\1NONHT_PR\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \ - "\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\22WDSLEGACY\23PROBECHAN\24HT" \ - "\25AMDPU_TX\26AMPDU_TX\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN" \ + "\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\22WDSLEGACY\23PROBECHAN" \ + "\24HT\25AMDPU_TX\26AMPDU_TX\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN" \ "\33SHORTGI20\34SHORTGI40\35HTCOMPAT\36RIFS" #define IEEE80211_FVEN_BITS "\20" /* ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS" void ieee80211_ifattach(struct ieee80211com *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); void ieee80211_ifdetach(struct ieee80211com *); int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *, const char name[IFNAMSIZ], int unit, int opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t macaddr[IEEE80211_ADDR_LEN]); int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t); void ieee80211_vap_detach(struct ieee80211vap *); const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *); void ieee80211_announce(struct ieee80211com *); void ieee80211_announce_channels(struct ieee80211com *); void ieee80211_drain(struct ieee80211com *); void ieee80211_media_init(struct ieee80211com *); struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); int ieee80211_mhz2ieee(u_int, u_int); int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int freq, int flags); struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, int ieee, int flags); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211vap *vap) { vap->iv_key_update_begin(vap); } static __inline void ieee80211_key_update_end(struct ieee80211vap *vap) { vap->iv_key_update_end(vap); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Notify a vap that beacon state has been updated. */ static __inline void ieee80211_beacon_notify(struct ieee80211vap *vap, int what) { if (vap->iv_state == IEEE80211_S_RUN) vap->iv_update_beacon(vap, what); } /* * Calculate HT channel promotion flags for a channel. * XXX belongs in ieee80211_ht.h but needs IEEE80211_FEXT_* */ static __inline int ieee80211_htchanflags(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_HT40(c) ? IEEE80211_FEXT_HT | IEEE80211_FEXT_USEHT40 : IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FEXT_HT : 0; } /* * Debugging facilities compiled in when IEEE80211_DEBUG is defined. * * The intent is that any problem in the net80211 layer can be * diagnosed by inspecting the statistics (dumped by the wlanstats * program) and/or the msgs generated by net80211. Messages are * broken into functional classes and can be controlled with the * wlandebug program. Certain of these msg groups are for facilities * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1X). */ #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ #define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #define IEEE80211_MSG_BITS \ "\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \ "\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22DOT1X" \ "\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \ "\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N" #ifdef IEEE80211_DEBUG #define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m)) #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note(_vap, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(struct ieee80211vap *, const char *, ...); void ieee80211_note_mac(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...); void ieee80211_note_frame(struct ieee80211vap *, const struct ieee80211_frame *, const char *, ...); #define ieee80211_msg_debug(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_ASSOC) /* * Emit a debug message about discarding a frame or information * element. One format is for extracting the mac address from * the frame header; the other is for when a header is not * available or otherwise appropriate. */ #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\ } while (0) void ieee80211_discard_frame(struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_ie(struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_mac(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...); #else #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_vap) 0 #define ieee80211_msg(_vap, _m) 0 #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) #endif #endif /* _NET80211_IEEE80211_VAR_H_ */