Index: head/sys/amd64/conf/NOTES =================================================================== --- head/sys/amd64/conf/NOTES (revision 163629) +++ head/sys/amd64/conf/NOTES (revision 163630) @@ -1,668 +1,666 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # $FreeBSD$ # # # We want LINT to cover profiling as well. profile 2 ##################################################################### # SMP OPTIONS: # # Notes: # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Optional: options IPI_PREEMPTION device atpic # Optional legacy pic support device mptable # Optional MPSPEC mptable support # # Watchdog routines. # options MP_WATCHDOG # # Debugging options. # options STOP_NMI # Stop CPUS using NMI instead of IPI ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu HAMMER # aka K8, aka Opteron & Athlon64 # # Options for CPU features. # # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # #XXX#options PERFMON ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING ##################################################################### # CLOCK OPTIONS # The following options are used for debugging clock behavior only, and # should not be used for production systems. # CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at # startup until the user presses a key. (The i8254 clock is always # calibrated relative to the RTC (mc146818a) and this option causes the # calibration to be repeated.) options CLK_CALIBRATION_LOOP # CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 # clock to actually be used. options CLK_USE_I8254_CALIBRATION ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # # sio: serial ports (see sio(4)), including support for various # PC Card devices, such as Modem and NICs # device sio hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" # `flags' specific to sio(4). # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x20 force this unit to be the console (unless there is another # higher priority console). This replaces the COMCONSOLE option. # 0x40 reserve this unit for low level console operations. Do not # access the device in any normal way. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # PnP `flags' # 0x1 disable probing of this device. Used to prevent your modem # from being attached as a PnP modem. # Other flags for sio that aren't documented in the man page. # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for # ST16650A-compatible UARTs. # Options for sio: options COM_ESP # Code for Hayes ESP. options COM_MULTIPORT # Code for some cards with shared IRQs. options CONSPEED=115200 # Speed for serial console # (default 9600). device speaker #Play IBM BASIC-style noises out your speaker hint.speaker.0.at="isa" hint.speaker.0.port="0x61" device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # PCI bus & PCI options: # device pci # # AGP GART support device agp ##################################################################### # HARDWARE DEVICE CONFIGURATION # # Optional devices: # # PS/2 mouse device psm hint.psm.0.at="atkbdc" hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=jp.106 # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG -device splash # Splash screen and screen saver support - # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # # To enable Linuxulator support, one must also include COMPAT_LINUX in the # config as well. The other option is to load both as modules. device tdfx # Enable 3Dfx Voodoo support #XXX#device tdfx_linux # Enable Linuxulator support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). # # ACPI_NO_SEMAPHORES makes the AcpiOs*Semaphore routines a no-op. # # ACPICA_PEDANTIC enables strict checking of AML. Our default is to # relax these checks to allow code generated by the Microsoft compiler # to still execute. # # Note that building ACPI into the kernel is deprecated; the module is # normally loaded automatically by the loader. device acpi options ACPI_DEBUG #!options ACPI_NO_SEMAPHORES #!options ACPICA_PEDANTIC # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # Direct Rendering modules for 3D acceleration. device drm # DRM core module required by DRM drivers device i915drm # Intel i830 through i915 device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL device mgadrm # AGP Matrox G200, G400, G450, G550 device r128drm # ATI Rage 128 device radeondrm # ATI Radeon device savagedrm # S3 Savage3D, Savage4 device sisdrm # SiS 300/305, 540, 630 device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee options DRM_DEBUG # Include debug printfs (slow) # # Network interfaces: # # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 # HP PC Lan+, various PC Card devices # (requires miibus) # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # nve: nVidia nForce MCP on-board Ethernet Networking # ral: Ralink Technology IEEE 802.11 wireless adapter # ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter device ed options ED_3C503 options ED_HPP options ED_SIC device iwi device ipw device nfe # nVidia nForce MCP on-board Ethernet Networking device nve # nVidia nForce MCP on-board Ethernet Networking device ral device ural device ath device ath_hal # Atheros HAL (includes binary component) #device ath_rate_amrr # AMRR rate control for ath driver #device ath_rate_onoe # Onoe rate control for ath driver device ath_rate_sample # SampleRate rate control for the ath driver #device wlan # 802.11 layer # #XXX this stores pointers in a 32bit field that is defined by the hardware #device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # 3ware 9000 series PATA/SATA RAID controller driver and options. # The driver is implemented as a SIM, and so, needs the CAM infrastructure. # options TWA_DEBUG # 0-10; 10 prints the most messages. options TWA_FLASH_FIRMWARE # firmware image bundled when defined. device twa # 3ware 9000 series PATA/SATA RAID # # SCSI host adapters: # # ncv: NCR 53C500 based SCSI host adapters. # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. # stg: TMC 18C30, 18C50 based SCSI host adapters. device ncv device nsp device stg # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Highpoint RocketRAID 182x. This is really just software RAID on a # Marvell SATA chip. device hptmv # # Highpoint RocketRAID 232x. This is software RAID but with hardware # acceleration assistance for RAID_5. device rr232x # # IBM (now Adaptec) ServeRAID controllers device ips # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # smbios: DMI/SMBIOS entry point # vpd: Vital Product Data kernel interface # cy: Cyclades serial driver # digi: Digiboard driver # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. device cy options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared device digi # BIOS & FEP/OS components of device digi. device digi_CX device digi_CX_PCI device digi_EPCX device digi_EPCX_PCI device digi_Xe device digi_Xem device digi_Xr device ipmi # Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) device pbio hint.pbio.0.at="isa" hint.pbio.0.port="0x360" device smbios device vpd # HOT1 Xilinx 6200 card (http://www.vcc.com/) device xrpu # # Laptop/Notebook options: # # # I2C Bus # # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # device ichwd #--------------------------------------------------------------------------- # ISDN4BSD # # See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. # # i4b passive ISDN cards support contains the following hardware drivers: # # isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver # iwic - Winbond W6692 PCI bus ISDN S/T interface controller # ifpi - AVM Fritz!Card PCI driver # ifpi2 - AVM Fritz!Card PCI version 2 driver # itjc - Siemens ISAC / TJNet Tiger300/320 chipset # # i4b active ISDN cards support contains the following hardware drivers: # # iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 # # Note that the ``options'' (if given) and ``device'' lines must BOTH # be uncommented to enable support for a given card ! # # In addition to a hardware driver (and probably an option) the mandatory # ISDN protocol stack devices and the mandatory support device must be # enabled as well as one or more devices from the optional devices section. # #--------------------------------------------------------------------------- # isic driver (Siemens/Infineon chipsets) # #XXX#device isic # # PCI bus Cards: # -------------- # # ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) options ELSA_QS1PCI # #--------------------------------------------------------------------------- # ifpi2 driver for AVM Fritz!Card PCI version 2 # # AVM Fritz!Card PCI version 2 #XXX#device ifpi2 # #--------------------------------------------------------------------------- # iwic driver for Winbond W6692 chipset # # ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) #XXX#device iwic # #--------------------------------------------------------------------------- # itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset # # Traverse Technologies NETjet-S # Teles PCI-TJ #XXX#device itjc # #--------------------------------------------------------------------------- # iavc driver (AVM active cards, needs i4bcapi driver!) # #XXX#device iavc # #--------------------------------------------------------------------------- # ISDN Protocol Stack - mandatory for all hardware drivers # # Q.921 / layer 2 - i4b passive cards D channel handling #XXX#device i4bq921 # # Q.931 / layer 3 - i4b passive cards D channel handling #XXX#device i4bq931 # # layer 4 - i4b common passive and active card handling #XXX#device i4b # #--------------------------------------------------------------------------- # ISDN devices - mandatory for all hardware drivers # # userland driver to do ISDN tracing (for passive cards only) #XXX#device i4btrc #XXX#options NI4BTRC=4 # # userland driver to control the whole thing #XXX#device i4bctl # #--------------------------------------------------------------------------- # ISDN devices - optional # # userland driver for access to raw B channel #XXX#device i4brbch #XXX#options NI4BRBCH=4 # # userland driver for telephony #XXX#device i4btel #XXX#options NI4BTEL=2 # # network driver for IP over raw HDLC ISDN #XXX#device i4bipr #XXX#options NI4BIPR=4 # enable VJ header compression detection for ipr i/f options IPR_VJ # enable logging of the first n IP packets to isdnd (n=32 here) options IPR_LOG=32 # # network driver for sync PPP over ISDN; requires an equivalent # number of sppp device to be configured #XXX#device i4bisppp #XXX#options NI4BISPPP=4 # # B-channel interface to the netgraph subsystem #XXX#device i4bing #XXX#options NI4BING=2 # # CAPI driver needed for active ISDN cards (see iavc driver above) #XXX#device i4bcapi # #--------------------------------------------------------------------------- # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # Set the number of PV entries per process. Increasing this can # stop panics related to heavy use of shared memory. However, that can # (combined with large amounts of physical memory) cause panics at # boot time due the kernel running out of VM space. # # If you're tweaking this, you might also want to increase the sysctls # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". # # The value below is the one more than the default. # options PMAP_SHPGPERPROC=201 ##################################################################### # ABI Emulation #XXX keep these here for now and reactivate when support for emulating #XXX these 32 bit binaries is added. # Enable 32-bit runtime support for FreeBSD/i386 binaries. options COMPAT_IA32 # Enable iBCS2 runtime support for SCO and ISC binaries #XXX#options IBCS2 # Emulate spx device for client side of SVR3 local X interface #XXX#options SPX_HACK # Enable Linux ABI emulation #XXX#options COMPAT_LINUX # Enable 32-bit Linux ABI emulation (requires COMPAT_43 and COMPAT_IA32) options COMPAT_LINUX32 # Enable the linux-like proc filesystem support (requires COMPAT_LINUX32 # and PSEUDOFS) options LINPROCFS #Enable the linux-like sys filesystem support (requires COMPAT_LINUX32 # and PSEUDOFS) options LINSYSFS # # SysVR4 ABI emulation # # The svr4 ABI emulator can be statically compiled into the kernel or loaded as # a KLD module. # The STREAMS network emulation code can also be compiled statically or as a # module. If loaded as a module, it must be loaded before the svr4 module # (the /usr/sbin/svr4 script does this for you). If compiling statically, # the `streams' device must be configured into any kernel which also # specifies COMPAT_SVR4. It is possible to have a statically-configured # STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 # script understands that it doesn't need to load the `streams' module under # those circumstances. # Caveat: At this time, `options KTRACE' is required for the svr4 emulator # (whether static or dynamic). # #XXX#options COMPAT_SVR4 # build emulator statically #XXX#options DEBUG_SVR4 # enable verbose debugging #XXX#device streams # STREAMS network driver (required for svr4). ##################################################################### # VM OPTIONS # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=3 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options FB_INSTALL_CDEV # install a CDEV entry in /dev options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE # Enable NDIS binary driver support options NDISAPI device ndis Index: head/sys/conf/NOTES =================================================================== --- head/sys/conf/NOTES (revision 163629) +++ head/sys/conf/NOTES (revision 163630) @@ -1,2556 +1,2558 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # Options for the VM subsystem # Deprecated options supported for backwards compatibility #options PQ_NOOPT # No coloring # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings -n 3 /boot/kernel/kernel | sed -n 's/^___//p' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel options GEOM_AES # Don't use, use GEOM_BDE options GEOM_APPLE # Apple partitioning options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation options GEOM_GATE # Userland services. options GEOM_GPT # GPT partitioning options GEOM_LABEL # Providers labelization. options GEOM_MBR # DOS/MBR partitioning options GEOM_MIRROR # Disk mirroring. options GEOM_NOP # Test class. options GEOM_PC98 # NEC PC9800 partitioning options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning options GEOM_UZIP # Read-only compressed disks options GEOM_VOL # Volume names from UFS superblock options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE is a new scheduler that has been designed for SMP and has some # advantages for UP as well. It is intended to replace the 4BSD scheduler # over time. NOTE: SCHED_ULE is currently considered experimental and is # not recommended for production use at this time. # options SCHED_4BSD #options SCHED_CORE #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behaviour is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_GIANT causes the Giant lock to also be made adaptive when # running without NO_ADAPTIVE_MUTEXES. Normally, because Giant is assumed # to be held for extended periods, contention on Giant will cause a thread # to sleep rather than spinning. options ADAPTIVE_GIANT # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # MUTEX_WAKE_ALL changes the mutex unlock algorithm to wake all waiters # when a contested mutex is released rather than just awaking the highest # priority waiter. options MUTEX_WAKE_ALL # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SMP Debugging Options: # # PREEMPTION allows the threads that are in the kernel to be preempted # by higher priority threads. It helps with interactivity and # allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # MUTEX_DEBUG enables various extra assertions in the mutex code. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options MUTEX_DEBUG options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # MUTEX_PROFILING - Profiling mutual exclusion locks (mutexes). See # MUTEX_PROFILING(9) for details. options MUTEX_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing mechanism imported from BSD/OS. Currently # it has no userland interface aside from a few sysctl's. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it must be a power of two. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. # options KTR options KTR_ENTRIES=1024 options KTR_COMPILE=(KTR_INTR|KTR_PROC) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as KTR(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # RESTARTABLE_PANICS allows one to continue from a panic as if it were # a call to the debugger to continue from a panic as instead. It is only # useful if a kernel debugger is present. To restart from a panic, reset # the panicstr variable to NULL and continue execution. This option is # for development use only and should NOT be used in production systems # to "workaround" a panic. # #options RESTARTABLE_PANICS # # This option let some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families: # Only the INET (Internet) family is officially supported in FreeBSD. # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options IPSEC #IP security options IPSEC_ESP #IP security (crypto; define w/ IPSEC) options IPSEC_DEBUG #debug for IP security # # Set IPSEC_FILTERGIF to force packets coming through a gif tunnel # to be processed by any configured packet filtering (ipfw, ipf). # The default is that packets coming from a tunnel are _not_ processed; # they are assumed trusted. # # IPSEC history is preserved for such packets, and can be filtered # using ipfw(8)'s 'ipsec' keyword, when this option is enabled. # #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel #options FAST_IPSEC #new IPsec (cannot define w/ IPSEC) options IPX #IPX/SPX communications protocols options IPXIP #IPX in IP encapsulation (not available) options NCP #NetWare Core protocol options NETATALK #Appletalk communications protocols options NETATALKDEBUG #Appletalk debugging # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Bases Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_H4 # ng_h4(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CISCO options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FEC options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI # MPPC compression requires proprietary files (not included) #options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_TTY options NETGRAPH_UI options NETGRAPH_VJC # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured or token-ring is enabled. # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. It requires `device miibus'. # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # ath, and awi drivers and will eventually be required by all 802.11 drivers. # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The `fddi' device provides generic code to support FDDI. # The `arcnet' device provides generic code to support Arcnet. # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). # The `sl' device implements the Serial Line IP (SLIP) service. # The `ppp' device implements the Point-to-Point Protocol. # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. DHCP requires bpf. # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing purposes. This shows up as the `ds' interface. # The `tap' device is a pty-like virtual Ethernet interface # The `tun' device implements (user-)ppp and nos-tun # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements two types of IP4 over IP4 tunneling: # GRE and MOBILE, as specified in the RFC1701 and RFC2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. # The `faith' device captures packets sent to it and diverts them # to the IPv4/IPv6 translation daemon. # The `stf' device implements 6to4 encapsulation. # The `ef' device provides support for multiple ethernet frame types # specified via ETHER_* options. See ef(4) for details. # # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). # # The PPP_BSDCOMP option enables support for compress(1) style entire # packet compression, the PPP_DEFLATE is for zlib/gzip style compression. # PPP_FILTER enables code for filtering the ppp data stream and selecting # events for resetting the demand dial activity timer - requires bpf. # See pppd(8) for more details. # device ether #Generic Ethernet device vlan #VLAN support (needs miibus) device wlan #802.11 support device wlan_wep #802.11 WEP support device wlan_ccmp #802.11 CCMP support device wlan_tkip #802.11 TKIP support device wlan_xauth #802.11 external authenticator support device wlan_acl #802.11 MAC ACL support device token #Generic TokenRing device fddi #Generic FDDI device arcnet #Generic Arcnet device sppp #Generic Synchronous PPP device loop #Network loopback device device bpf #Berkeley packet filter device disc #Discard device (ds0, ds1, etc) device tap #Virtual Ethernet driver device tun #Tunnel driver (ppp(8), nos-tun(8)) device sl #Serial Line IP device gre #IP over IP tunneling device if_bridge #Bridge interface device pf #PF OpenBSD packet-filter firewall device pflog #logging support interface for PF device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPSec interface (needs FAST_IPSEC) device ppp #Point-to-point protocol options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpf) device ef # Multiple ethernet frames support options ETHER_II # enable Ethernet_II frame options ETHER_8023 # enable Ethernet_802.3 (Novell) frame options ETHER_8022 # enable Ethernet_802.2 frame options ETHER_SNAP # enable Ethernet_802.2/SNAP frame # for IPv6 device gif #IPv6 and IPv4 tunneling options XBONEHACK device faith #for IPv6 and IPv4 translation device stf #6to4 IPv6 over IPv4 encapsulation # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted(8). # # PIM enables Protocol Independent Multicast in the kernel. # Requires MROUTING enabled. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_FORWARD enables changing of the packet destination either # to do some sort of policy routing or transparent proxying. Used by # ``ipfw forward''. All redirections apply to locally generated # packets too. Because of this great care is required when # crafting the ruleset. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # options MROUTING # Multicast routing options PIM # Protocol Independent Multicast options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_FORWARD #packet destination changes options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options TCPDEBUG # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. options MBUF_STRESS_TEST # Statically Link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_HTTP # TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This # prevents nmap et al. from identifying the TCP/IP stack, but breaks support # for RFC1644 extensions and is not recommended for web servers. # options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto', 'options FAST_IPSEC' or 'options # IPSEC', and 'device cryptodev'. #options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have "options HZ=1000" to achieve a # smoother scheduling of the traffic. options DUMMYNET # Zero copy sockets support. This enables "zero copy" for sending and # receiving data via a socket. The send side works for any type of NIC, # the receive side only works for NICs that support MTUs greater than the # page size of your architecture and that support header splitting. See # zero_copy(9) for more details. options ZERO_COPY_SOCKETS # # ATM (HARP version) options # # ATM_CORE includes the base ATM functionality code. This must be included # for ATM support. # # ATM_IP includes support for running IP over ATM. # # At least one (and usually only one) of the following signalling managers # must be included (note that all signalling managers include PVC support): # ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'. # ATM_SPANS includes support for the `spans' signalling manager, which runs # the FORE Systems's proprietary SPANS signalling protocol. # ATM_UNI includes support for the `uni30' and `uni31' signalling managers, # which run the ATM Forum UNI 3.x signalling protocols. # # The `hfa' driver provides support for the FORE Systems, Inc. # PCA-200E ATM PCI Adapter. # # The `harp' pseudo-driver makes all NATM interface drivers available to HARP. # options ATM_CORE #core ATM protocol family options ATM_IP #IP over ATM support options ATM_SIGPVC #SIGPVC signalling manager options ATM_SPANS #SPANS signalling manager options ATM_UNI #UNI signalling manager device hfa #FORE PCA-200E ATM PCI device harp #Pseudo-interface for NATM ##################################################################### # FILESYSTEM OPTIONS # # Only the root, /usr, and /tmp filesystems need be statically # compiled; everything else will be automatically loaded at mount # time. (Exception: the UFS family--- FFS --- cannot # currently be demand-loaded.) Some people still prefer to statically # compile other filesystems as well. # # NB: The NULL, PORTAL, UMAP and UNION filesystems are known to be # buggy, and WILL panic your system if you attempt to do anything with # them. They are included here as an incentive for some enterprising # soul to sit down and fix them. # # One of these is mandatory: options FFS #Fast filesystem options NFSCLIENT #Network File System client # The rest are optional: options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options HPFS #OS/2 File system options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSSERVER #Network File System server options NTFS #NT File System options NULLFS #NULL filesystem # Broken (depends on NCP): #options NWFS #NetWare filesystem options PORTALFS #Portal filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options UDF #Universal Disk Format # Broken (seriously (functionally) broken): #options UMAPFS #UID map filesystem options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA or Netatalk, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1) PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_GATHERDELAY=10 # Default write gather delay (msec) options NFS_WDELAYHASHSIZ=16 # and with this options NFS_DEBUG # Enable NFS Debugging # Coda stuff: options CODA #CODA filesystem. device vcoda #coda minicache <-> venus comm. # Use the old Coda 5.x venus<->kernel interface instead of the new # realms-aware 6.x protocol. #options CODA_COMPAT_5 # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # # Add support for the ReiserFS filesystem (used in Linux). Currently, # this is limited to read-only access. # options REISERFS # # Add support for the SGI XFS filesystem. Currently, # this is limited to read-only access. # options XFS # Use real implementations of the aio_* system calls. There are numerous # stability and security issues in the current aio code that make it # unsuitable for inclusion on machines with untrusted local users. options VFS_AIO # Cryptographically secure random number generator; /dev/random device random # The system memory devices; /dev/mem, /dev/kmem device mem # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options NTFS_ICONV options UDF_ICONV # Experimental support for large MS-DOS filesystems. # # WARNING: This uses at least 32 bytes of kernel memory (which is not # reclaimed until the FS is unmounted) for each file on disk to map # between the 32-bit inode numbers used by VFS and the 64-bit pseudo-inode # numbers used internally by msdosfs. This is only safe to use in certain # controlled situations (e.g. read-only FS with less than 1 million files). # Since the mappings do not persist across unmounts (or reboots), these # filesystems are not suitable for exporting through NFS, or any other # application that requires fixed inode numbers. options MSDOSFS_LARGE ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (100) means a granularity of 10ms (1s/HZ). # Some subsystems, such as DUMMYNET, might benefit from a smaller # granularity such as 1ms or less, for a smoother scheduling of packets. # Consider, however, that reducing the granularity too much might # cause excessive overhead in clock interrupt processing, # potentially causing ticks to be missed and thus actually reducing # the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration as the "pass" driver. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #SCSI Environmental Services (and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver # CAM OPTIONS: # debugging options: # -- NOTE -- If you specify one of the bus/target/lun options, you must # specify them all! # CAMDEBUG: When defined enables debugging macros # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses. # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets. # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns. # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE, # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # CAM_NEW_TRAN_CODE: this is the new transport layer code that will be switched # to soon # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB) options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # build a topology with the SES device that's on the box these drives # are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # The `pty' device usually turns out to be ``effectively mandatory'', # as it is required for `telnetd', `rlogind', `screen', `emacs', and # `xterm', among others. device pty #Pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 # Maximum size of a tty or pty input buffer. options TTYHOG=8193 ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # EISA, MCA, PCI and pccard are self identifying buses, so no hints # are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FB_DEBUG # Frame buffer debugging +device splash # Splash screen and screen saver support + # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (SCO color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behaviour of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # # Optional devices: # # # SCSI host adapters: # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. # aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices # such as the Tekram DC-390(T). # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # esp: NCR53c9x. Only for SBUS hardware right now. # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. # wds: WD7000 # # Note that the order is important in order for Buslogic ISA/EISA cards to be # probed correctly. # device bt hint.bt.0.at="isa" hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw device aha hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb device ahc device ahd device amd device esp device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpt device ncr device sym device trm device wds hint.wds.0.at="isa" hint.wds.0.port="0x350" hint.wds.0.irq="11" hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # The adw driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. options ADW_ALLOW_MEMIO # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role (none, target, init, both) # options ISP_DEFAULT_ROLES=3 # Options used in dev/sym/ (Symbios SCSI driver). #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. # The DPT controllers are commonly re-licensed under other brand-names - # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and # Compaq are actually DPT controllers. # # See src/sys/dev/dpt for debugging and other subtle options. # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various # instruments are enabled. The tools in # /usr/sbin/dpt_* assume these to be enabled. # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT. # If you ant the driver to handle timeouts, enable # this option. If your system is very busy, this # option will create more trouble than solve. # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to # wait when timing out with the above option. # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h # DPT_LOST_IRQ When enabled, will try, once per second, to catch # any interrupt that got lost. Seems to help in some # DPT-firmware/Motherboard combinations. Minimal # cost, great benefit. # DPT_RESET_HBA Make "reset" actually reset the controller # instead of fudging it. Only enable this if you # are 100% certain you need it. device dpt # DPT options #!CAM# options DPT_MEASURE_PERFORMANCE #!CAM# options DPT_HANDLE_TIMEOUTS options DPT_TIMEOUT_FACTOR=4 options DPT_LOST_IRQ options DPT_RESET_HBA # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device mfi # LSI MegaRAID SAS options MFI_DEBUG # # 3ware ATA RAID # device twe # 3ware ATA RAID # # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM # needs CAM to be present (scbus & pass) # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # The following options are valid on the ATA driver: # # ATA_STATIC_ID: controller numbering is static ie depends on location # else the device numbers are dynamically allocated. options ATA_STATIC_ID # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for some PCI 10/100 ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus0" to the kernel config pulls in support for # the generic miibus API and all of the PHY drivers, including a # generic one for PHYs that aren't specifically handled by an # individual driver. device miibus # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # awi: Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and # Harris (Intersil) Chipset with PCnetMobile firmware by AMD. # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # cm: Arcnet SMC COM90c26 / SMC COM90c56 # (and SMC COM90c66 in '56 compatibility mode) adapters. # cnw: Xircom CNW/Netware Airsurfer PC Card adapter # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # de: Digital Equipment DC21040 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 # and PC Card devices using these chipsets. # ex: Intel EtherExpress Pro/10 and other i82595-based adapters, # Olicom Ethernet PC Card devices. # fe: Fujitsu MB86960A/MB86965A Ethernet # fea: DEC DEFEA EISA FDDI adapter # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # hme: Sun HME (Happy Meal Ethernet) # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lmc: Support for the LMC/SBE wide-area network interface cards. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home # chipsets. These can also be handled by the le(4) driver if the # pcn(4) driver is left out of the kernel. The le(4) driver does not # support the additional features like the MII bus and burst mode of # the PCnet-FAST and greater chipsets though. # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the # Adaptec AIC-6915 "starfire" controller. # This includes dual and quad port cards, as well as one 100baseFX card. # Most of these are 64-bit PCI devices, except for one single port # card which is 32-bit. # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sbsh: Support for Granch SBNI16 SHDSL modem PCI adapters # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # sn: Support for ISA and PC Card Ethernet devices using the # SMC91C90/92/94/95 chips. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' # cards and integrated ethernet controllers. This includes several # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking # Technologies PN102TX, and the AOpen/Acer ALN-320. # vx: 3Com 3C590 and 3C595 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. # Note: this is not the same as the Winbond W89C940F, which is a # NE2000 clone. # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA/EISA devices is important here device cm hint.cm.0.at="isa" hint.cm.0.port="0x2e0" hint.cm.0.irq="9" hint.cm.0.maddr="0xdc000" device ep device ex device fe hint.fe.0.at="isa" hint.fe.0.port="0x300" device fea device sn hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" device an device awi device cnw device wi device xe # PCI Ethernet NICs that use the common MII bus controller code. device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device hme # Sun HME (Happy Meal Ethernet) device lge # Level 1 LXT1001 gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device rl # RealTek 8129/8139 device pcn # AMD Am79C97x PCI 10/100 NICs device sf # Adaptec AIC-6915 (``Starfire'') device sbsh # Granch SBNI16 SHDSL modem device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI FDDI NICs. device fpa # PCI WAN adapters. device lmc # Use "private" jumbo buffers allocated exclusively for the ti(4) driver. # This option is incompatible with the TI_JUMBO_HDRSPLIT option below. #options TI_PRIVATE_JUMBOS # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # ATM related options (Cranor version) # (note: this driver cannot be used with the HARP ATM stack) # # The `en' device provides support for Efficient Networks (ENI) # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0). # # The `hatm' device provides support for Fore/Marconi HE155 and HE622 # ATM PCI cards. # # The `fatm' device provides support for Fore PCA200E ATM PCI cards. # # The `patm' device provides support for IDT77252 based cards like # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards. # # atm device provides generic atm functions and is required for # atm devices. # NATM enables the netnatm protocol family that can be used to # bypass TCP/IP. # # utopia provides the access to the ATM PHY chips and is required for en, # hatm and fatm. # # the current driver supports only PVC operations (no atm-arp, no multicast). # for more details, please read the original documents at # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html # device atm device en device fatm #Fore PCA200E device hatm #Fore/Marconi HE155/622 device patm #IDT77252 cards (ProATM and IDT) device utopia #ATM PHY driver options NATM #native ATM options LIBMBPOOL #needed by patm, iatm # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tells the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_au88x0 Aureal Vortex 1/2/Advantage PCI. This driver # lacks support for playback and recording. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_ich: Intel ICH PCI and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_solo: ESS Solo-1x PCI. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. # snd_uaudio: USB audio. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_au88x0 #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx options SND_EMU10KX_MULTICHANNEL device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_via8233 device snd_via82c686 device snd_vibes device snd_uaudio # For non-PnP sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # IEEE-488 hardware: # pcii: PCIIA cards (uPD7210 based isa cards) # tnt4882: National Instruments PCI-GPIB card. device pcii hint.pcii.0.at="isa" hint.pcii.0.port="0x2e1" hint.pcii.0.irq="5" hint.pcii.0.drq="1" device tnt4882 # # Miscellaneous hardware: # # scd: Sony CD-ROM using proprietary (non-ATAPI) interface # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # cy: Cyclades serial driver # joy: joystick (including IO DATA PCJOY PC Card joystick) # rc: RISCom/8 multiport card # rp: Comtrol Rocketport(ISA/PCI) - single card # si: Specialix SI/XIO 4-32 port terminal multiplexor # Notes on the Comtrol Rocketport driver: # # The exact values used for rp0 depend on how many boards you have # in the system. The manufacturer's sample configs are listed as: # # device rp # core driver support # # Comtrol Rocketport ISA single card # hint.rp.0.at="isa" # hint.rp.0.port="0x280" # # If instead you have two ISA cards, one installed at 0x100 and the # second installed at 0x180, then you should add the following to # your kernel probe hints: # hint.rp.0.at="isa" # hint.rp.0.port="0x100" # hint.rp.1.at="isa" # hint.rp.1.port="0x180" # # For 4 ISA cards, it might be something like this: # hint.rp.0.at="isa" # hint.rp.0.port="0x180" # hint.rp.1.at="isa" # hint.rp.1.port="0x100" # hint.rp.2.at="isa" # hint.rp.2.port="0x340" # hint.rp.3.at="isa" # hint.rp.3.port="0x240" # # For PCI cards, you need no hints. # Mitsumi CD-ROM device mcd hint.mcd.0.at="isa" hint.mcd.0.port="0x300" # for the Sony CDU31/33A CDROM device scd hint.scd.0.at="isa" hint.scd.0.port="0x230" device joy # PnP aware, hints for non-PnP only hint.joy.0.at="isa" hint.joy.0.port="0x201" device rc hint.rc.0.at="isa" hint.rc.0.port="0x220" hint.rc.0.irq="12" device rp hint.rp.0.at="isa" hint.rp.0.port="0x280" device si options SI_DEBUG hint.si.0.at="isa" hint.si.0.maddr="0xd0000" hint.si.0.irq="12" # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35Mhz) boards where PAL is used # to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enable IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # pccbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device smb # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCLIENT and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP # # Add software watchdog routines. # options SW_WATCHDOG # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctls "vm.defer_swapspace_pageouts" and # "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and change a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Also note # that it is likely to break e.g. fstat(1) unless you recompile your # userland with -DDEBUG_LOCKS as well. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # SL811 Controller device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # Generic USB device driver device ugen # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB Iomega Zip 100 Drive (Requires scbus and da) device umass # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # Diamond Rio 500 MP3 player device urio # USB scanners device uscanner # # USB serial support device ucom # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for BWCT console serial adapters device ubser # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for Prolific PL-2303 serial adapters device uplcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # debugging options for the USB subsystem # options USB_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=it.iso # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring FAST_IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/stand/sysinstall # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of entries in a semaphore map. options SEMMAP=31 # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SCSI_NCR_DEBUG options SCSI_NCR_MAX_SYNC=10000 options SCSI_NCR_MAX_WIDE=1 options SCSI_NCR_MYADDR=7 options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options SHOW_BUSYBUFS # List buffers that prevent root unmount options SLIP_IFF_OPTS options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 Index: head/sys/conf/files =================================================================== --- head/sys/conf/files (revision 163629) +++ head/sys/conf/files (revision 163630) @@ -1,2117 +1,2118 @@ # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # acpi_quirks.h optional acpi \ dependency "$S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ compile-with "${AWK} -f $S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ no-obj no-implicit-rule before-depend \ clean "acpi_quirks.h" aicasm optional ahc | ahd \ dependency "$S/dev/aic7xxx/aicasm/*.[chyl]" \ compile-with "CC='${CC}' ${MAKE} -f $S/dev/aic7xxx/aicasm/Makefile MAKESRCPATH=$S/dev/aic7xxx/aicasm" \ no-obj no-implicit-rule \ clean "aicasm* y.tab.h" aic7xxx_seq.h optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic7xxx_seq.h" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg.h optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic7xxx_reg.h" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg_print.c optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule local \ clean "aic7xxx_reg_print.c" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg_print.o optional ahc ahc_reg_pretty_print \ compile-with "${NORMAL_C}" \ no-implicit-rule local aic79xx_seq.h optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic79xx_seq.h" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg.h optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic79xx_reg.h" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg_print.c optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule local \ clean "aic79xx_reg_print.c" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg_print.o optional ahd pci ahd_reg_pretty_print \ compile-with "${NORMAL_C}" \ no-implicit-rule local emu10k1-alsa%diked.h optional snd_emu10k1 | snd_emu10kx \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/emu10k1-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/emu10k1-alsa.h emu10k1-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "emu10k1-alsa%diked.h" p16v-alsa%diked.h optional snd_emu10kx pci \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p16v-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p16v-alsa.h p16v-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "p16v-alsa%diked.h" p17v-alsa%diked.h optional snd_emu10kx pci \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p17v-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p17v-alsa.h p17v-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "p17v-alsa%diked.h" miidevs.h optional miibus | mii \ dependency "$S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ compile-with "${AWK} -f $S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ no-obj no-implicit-rule before-depend \ clean "miidevs.h" pccarddevs.h standard \ dependency "$S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ compile-with "${AWK} -f $S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ no-obj no-implicit-rule before-depend \ clean "pccarddevs.h" usbdevs.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -h" \ no-obj no-implicit-rule before-depend \ clean "usbdevs.h" usbdevs_data.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -d" \ no-obj no-implicit-rule before-depend \ clean "usbdevs_data.h" cam/cam.c optional scbus cam/cam_periph.c optional scbus cam/cam_queue.c optional scbus cam/cam_sim.c optional scbus cam/cam_xpt.c optional scbus cam/scsi/scsi_all.c optional scbus cam/scsi/scsi_cd.c optional cd cam/scsi/scsi_ch.c optional ch cam/scsi/scsi_da.c optional da cam/scsi/scsi_low.c optional ct | ncv | nsp | stg cam/scsi/scsi_low_pisa.c optional ct | ncv | nsp | stg cam/scsi/scsi_pass.c optional pass cam/scsi/scsi_pt.c optional pt cam/scsi/scsi_sa.c optional sa cam/scsi/scsi_ses.c optional ses cam/scsi/scsi_targ_bh.c optional targbh cam/scsi/scsi_target.c optional targ coda/coda_fbsd.c optional vcoda coda/coda_namecache.c optional vcoda coda/coda_psdev.c optional vcoda coda/coda_subr.c optional vcoda coda/coda_venus.c optional vcoda coda/coda_vfsops.c optional vcoda coda/coda_vnops.c optional vcoda contrib/altq/altq/altq_cbq.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_cdnr.c optional altq contrib/altq/altq/altq_hfsc.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_priq.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_red.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_rio.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_rmclass.c optional altq contrib/altq/altq/altq_subr.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/dev/acpica/dbcmds.c optional acpi acpi_debug contrib/dev/acpica/dbdisply.c optional acpi acpi_debug contrib/dev/acpica/dbexec.c optional acpi acpi_debug contrib/dev/acpica/dbfileio.c optional acpi acpi_debug contrib/dev/acpica/dbhistry.c optional acpi acpi_debug contrib/dev/acpica/dbinput.c optional acpi acpi_debug contrib/dev/acpica/dbstats.c optional acpi acpi_debug contrib/dev/acpica/dbutils.c optional acpi acpi_debug contrib/dev/acpica/dbxface.c optional acpi acpi_debug contrib/dev/acpica/dmbuffer.c optional acpi acpi_debug contrib/dev/acpica/dmnames.c optional acpi acpi_debug contrib/dev/acpica/dmopcode.c optional acpi acpi_debug contrib/dev/acpica/dmobject.c optional acpi acpi_debug contrib/dev/acpica/dmresrc.c optional acpi acpi_debug contrib/dev/acpica/dmresrcl.c optional acpi acpi_debug contrib/dev/acpica/dmresrcs.c optional acpi acpi_debug contrib/dev/acpica/dmutils.c optional acpi acpi_debug contrib/dev/acpica/dmwalk.c optional acpi acpi_debug contrib/dev/acpica/dsfield.c optional acpi contrib/dev/acpica/dsinit.c optional acpi contrib/dev/acpica/dsmethod.c optional acpi contrib/dev/acpica/dsmthdat.c optional acpi contrib/dev/acpica/dsobject.c optional acpi contrib/dev/acpica/dsopcode.c optional acpi contrib/dev/acpica/dsutils.c optional acpi contrib/dev/acpica/dswexec.c optional acpi contrib/dev/acpica/dswload.c optional acpi contrib/dev/acpica/dswscope.c optional acpi contrib/dev/acpica/dswstate.c optional acpi contrib/dev/acpica/evevent.c optional acpi contrib/dev/acpica/evgpe.c optional acpi contrib/dev/acpica/evgpeblk.c optional acpi contrib/dev/acpica/evmisc.c optional acpi contrib/dev/acpica/evregion.c optional acpi contrib/dev/acpica/evrgnini.c optional acpi contrib/dev/acpica/evsci.c optional acpi contrib/dev/acpica/evxface.c optional acpi contrib/dev/acpica/evxfevnt.c optional acpi contrib/dev/acpica/evxfregn.c optional acpi contrib/dev/acpica/exconfig.c optional acpi contrib/dev/acpica/exconvrt.c optional acpi contrib/dev/acpica/excreate.c optional acpi contrib/dev/acpica/exdump.c optional acpi contrib/dev/acpica/exfield.c optional acpi contrib/dev/acpica/exfldio.c optional acpi contrib/dev/acpica/exmisc.c optional acpi contrib/dev/acpica/exmutex.c optional acpi contrib/dev/acpica/exnames.c optional acpi contrib/dev/acpica/exoparg1.c optional acpi contrib/dev/acpica/exoparg2.c optional acpi contrib/dev/acpica/exoparg3.c optional acpi contrib/dev/acpica/exoparg6.c optional acpi contrib/dev/acpica/exprep.c optional acpi contrib/dev/acpica/exregion.c optional acpi contrib/dev/acpica/exresnte.c optional acpi contrib/dev/acpica/exresolv.c optional acpi contrib/dev/acpica/exresop.c optional acpi contrib/dev/acpica/exstore.c optional acpi contrib/dev/acpica/exstoren.c optional acpi contrib/dev/acpica/exstorob.c optional acpi contrib/dev/acpica/exsystem.c optional acpi contrib/dev/acpica/exutils.c optional acpi contrib/dev/acpica/hwacpi.c optional acpi contrib/dev/acpica/hwgpe.c optional acpi contrib/dev/acpica/hwregs.c optional acpi contrib/dev/acpica/hwsleep.c optional acpi contrib/dev/acpica/hwtimer.c optional acpi contrib/dev/acpica/nsaccess.c optional acpi contrib/dev/acpica/nsalloc.c optional acpi contrib/dev/acpica/nsdump.c optional acpi contrib/dev/acpica/nseval.c optional acpi contrib/dev/acpica/nsinit.c optional acpi contrib/dev/acpica/nsload.c optional acpi contrib/dev/acpica/nsnames.c optional acpi contrib/dev/acpica/nsobject.c optional acpi contrib/dev/acpica/nsparse.c optional acpi contrib/dev/acpica/nssearch.c optional acpi contrib/dev/acpica/nsutils.c optional acpi contrib/dev/acpica/nswalk.c optional acpi contrib/dev/acpica/nsxfeval.c optional acpi contrib/dev/acpica/nsxfname.c optional acpi contrib/dev/acpica/nsxfobj.c optional acpi contrib/dev/acpica/psargs.c optional acpi contrib/dev/acpica/psloop.c optional acpi contrib/dev/acpica/psopcode.c optional acpi contrib/dev/acpica/psparse.c optional acpi contrib/dev/acpica/psscope.c optional acpi contrib/dev/acpica/pstree.c optional acpi contrib/dev/acpica/psutils.c optional acpi contrib/dev/acpica/pswalk.c optional acpi contrib/dev/acpica/psxface.c optional acpi contrib/dev/acpica/rsaddr.c optional acpi contrib/dev/acpica/rscalc.c optional acpi contrib/dev/acpica/rscreate.c optional acpi contrib/dev/acpica/rsdump.c optional acpi contrib/dev/acpica/rsinfo.c optional acpi contrib/dev/acpica/rsio.c optional acpi contrib/dev/acpica/rsirq.c optional acpi contrib/dev/acpica/rslist.c optional acpi contrib/dev/acpica/rsmemory.c optional acpi contrib/dev/acpica/rsmisc.c optional acpi contrib/dev/acpica/rsutils.c optional acpi contrib/dev/acpica/rsxface.c optional acpi contrib/dev/acpica/tbconvrt.c optional acpi contrib/dev/acpica/tbget.c optional acpi contrib/dev/acpica/tbgetall.c optional acpi contrib/dev/acpica/tbinstal.c optional acpi contrib/dev/acpica/tbrsdt.c optional acpi contrib/dev/acpica/tbutils.c optional acpi contrib/dev/acpica/tbxface.c optional acpi contrib/dev/acpica/tbxfroot.c optional acpi contrib/dev/acpica/utalloc.c optional acpi contrib/dev/acpica/utcache.c optional acpi \ compile-with "${NORMAL_C} -DACPI_USE_LOCAL_CACHE" contrib/dev/acpica/utclib.c optional acpi contrib/dev/acpica/utcopy.c optional acpi contrib/dev/acpica/utdebug.c optional acpi contrib/dev/acpica/utdelete.c optional acpi contrib/dev/acpica/uteval.c optional acpi contrib/dev/acpica/utglobal.c optional acpi contrib/dev/acpica/utinit.c optional acpi contrib/dev/acpica/utmath.c optional acpi contrib/dev/acpica/utmisc.c optional acpi contrib/dev/acpica/utmutex.c optional acpi contrib/dev/acpica/utobject.c optional acpi contrib/dev/acpica/utstate.c optional acpi contrib/dev/acpica/utxface.c optional acpi contrib/ipfilter/netinet/fil.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_auth.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_fil_freebsd.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_frag.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_log.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_proxy.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_state.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_lookup.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_pool.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_htable.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_sync.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/mlfk_ipl.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ngatm/netnatm/api/cc_conn.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_data.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_dump.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_port.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_sig.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_user.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/unisap.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/straddr.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/unimsg_common.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/traffic.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_ie.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_msg.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_call.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_coord.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_party.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_print.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_reset.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_unimsgcpy.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_verify.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/pf/net/if_pflog.c optional pflog \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/if_pfsync.c optional pfsync \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_if.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_subr.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_ioctl.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_norm.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_table.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_osfp.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/netinet/in4_cksum.c optional pf inet crypto/blowfish/bf_ecb.c optional ipsec ipsec_esp crypto/blowfish/bf_skey.c optional crypto | ipsec ipsec_esp crypto/des/des_ecb.c optional crypto | ipsec ipsec_esp | netsmb crypto/des/des_setkey.c optional crypto | ipsec ipsec_esp | netsmb crypto/rc4/rc4.c optional netgraph_mppc_encryption crypto/rijndael/rijndael-alg-fst.c optional crypto | geom_bde | \ ipsec | random | wlan_ccmp crypto/rijndael/rijndael-api-fst.c optional geom_bde | random crypto/rijndael/rijndael-api.c optional crypto | ipsec | wlan_ccmp crypto/sha1.c optional carp | crypto | ipsec | \ netgraph_mppc_encryption crypto/sha2/sha2.c optional crypto | geom_bde | ipsec | random ddb/db_access.c optional ddb ddb/db_break.c optional ddb ddb/db_command.c optional ddb ddb/db_examine.c optional ddb ddb/db_expr.c optional ddb ddb/db_input.c optional ddb ddb/db_lex.c optional ddb ddb/db_main.c optional ddb ddb/db_output.c optional ddb ddb/db_print.c optional ddb ddb/db_ps.c optional ddb ddb/db_run.c optional ddb ddb/db_sym.c optional ddb ddb/db_thread.c optional ddb ddb/db_variables.c optional ddb ddb/db_watch.c optional ddb ddb/db_write_cmd.c optional ddb #dev/dpt/dpt_control.c optional dpt dev/aac/aac.c optional aac dev/aac/aac_cam.c optional aacp aac dev/aac/aac_debug.c optional aac dev/aac/aac_disk.c optional aac dev/aac/aac_linux.c optional aac compat_linux dev/aac/aac_pci.c optional aac pci dev/acpi_support/acpi_asus.c optional acpi_asus acpi dev/acpi_support/acpi_fujitsu.c optional acpi_fujitsu acpi dev/acpi_support/acpi_ibm.c optional acpi_ibm acpi dev/acpi_support/acpi_panasonic.c optional acpi_panasonic acpi dev/acpi_support/acpi_sony.c optional acpi_sony acpi dev/acpi_support/acpi_toshiba.c optional acpi_toshiba acpi dev/acpica/Osd/OsdDebug.c optional acpi dev/acpica/Osd/OsdHardware.c optional acpi dev/acpica/Osd/OsdInterrupt.c optional acpi dev/acpica/Osd/OsdMemory.c optional acpi dev/acpica/Osd/OsdSchedule.c optional acpi dev/acpica/Osd/OsdStream.c optional acpi dev/acpica/Osd/OsdSynch.c optional acpi dev/acpica/Osd/OsdTable.c optional acpi dev/acpica/acpi.c optional acpi dev/acpica/acpi_acad.c optional acpi dev/acpica/acpi_battery.c optional acpi dev/acpica/acpi_button.c optional acpi dev/acpica/acpi_cmbat.c optional acpi dev/acpica/acpi_cpu.c optional acpi dev/acpica/acpi_ec.c optional acpi dev/acpica/acpi_hpet.c optional acpi dev/acpica/acpi_isab.c optional acpi isa dev/acpica/acpi_lid.c optional acpi dev/acpica/acpi_package.c optional acpi dev/acpica/acpi_pci.c optional acpi pci dev/acpica/acpi_pci_link.c optional acpi pci dev/acpica/acpi_pcib.c optional acpi pci dev/acpica/acpi_pcib_acpi.c optional acpi pci dev/acpica/acpi_pcib_pci.c optional acpi pci dev/acpica/acpi_perf.c optional acpi dev/acpica/acpi_powerres.c optional acpi dev/acpica/acpi_quirk.c optional acpi dev/acpica/acpi_resource.c optional acpi dev/acpica/acpi_smbat.c optional acpi dev/acpica/acpi_thermal.c optional acpi dev/acpica/acpi_throttle.c optional acpi dev/acpica/acpi_timer.c optional acpi dev/acpica/acpi_video.c optional acpi_video acpi dev/acpica/acpi_dock.c optional acpi_dock acpi dev/adlink/adlink.c optional adlink dev/advansys/adv_eisa.c optional adv eisa dev/advansys/adv_pci.c optional adv pci dev/advansys/advansys.c optional adv dev/advansys/advlib.c optional adv dev/advansys/advmcode.c optional adv dev/advansys/adw_pci.c optional adw pci dev/advansys/adwcam.c optional adw dev/advansys/adwlib.c optional adw dev/advansys/adwmcode.c optional adw dev/aha/aha.c optional aha dev/aha/aha_isa.c optional aha isa dev/aha/aha_mca.c optional aha mca dev/ahb/ahb.c optional ahb eisa dev/aic/aic.c optional aic dev/aic/aic_pccard.c optional aic pccard dev/aic7xxx/ahc_eisa.c optional ahc eisa dev/aic7xxx/ahc_isa.c optional ahc isa dev/aic7xxx/ahc_pci.c optional ahc pci dev/aic7xxx/ahd_pci.c optional ahd pci dev/aic7xxx/aic7770.c optional ahc dev/aic7xxx/aic79xx.c optional ahd pci dev/aic7xxx/aic79xx_osm.c optional ahd pci dev/aic7xxx/aic79xx_pci.c optional ahd pci dev/aic7xxx/aic7xxx.c optional ahc dev/aic7xxx/aic7xxx_93cx6.c optional ahc dev/aic7xxx/aic7xxx_osm.c optional ahc dev/aic7xxx/aic7xxx_pci.c optional ahc pci dev/amd/amd.c optional amd dev/amr/amr.c optional amr dev/amr/amr_cam.c optional amr dev/amr/amr_disk.c optional amr dev/amr/amr_linux.c optional amr compat_linux dev/amr/amr_pci.c optional amr pci dev/an/if_an.c optional an dev/an/if_an_isa.c optional an isa dev/an/if_an_pccard.c optional an pccard dev/an/if_an_pci.c optional an pci dev/asr/asr.c optional asr pci dev/ata/ata_if.m optional ata dev/ata/ata-all.c optional ata dev/ata/ata-card.c optional ata pccard dev/ata/ata-cbus.c optional ata pc98 dev/ata/ata-chipset.c optional ata pci dev/ata/ata-disk.c optional atadisk dev/ata/ata-dma.c optional ata pci dev/ata/ata-isa.c optional ata isa dev/ata/ata-lowlevel.c optional ata dev/ata/ata-pci.c optional ata pci dev/ata/ata-queue.c optional ata dev/ata/ata-raid.c optional ataraid dev/ata/ata-usb.c optional atausb dev/ata/atapi-cam.c optional atapicam dev/ata/atapi-cd.c optional atapicd dev/ata/atapi-fd.c optional atapifd dev/ata/atapi-tape.c optional atapist dev/ath/ah_osdep.c optional ath_hal \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/amrr/amrr.c optional ath_rate_amrr dev/ath/ath_rate/onoe/onoe.c optional ath_rate_onoe \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/sample/sample.c optional ath_rate_sample \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_pci.c optional ath pci \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/awi/am79c930.c optional awi dev/awi/awi.c optional awi dev/awi/if_awi_pccard.c optional awi pccard dev/bce/if_bce.c optional bce dev/bfe/if_bfe.c optional bfe dev/bge/if_bge.c optional bge dev/bktr/bktr_audio.c optional bktr pci dev/bktr/bktr_card.c optional bktr pci dev/bktr/bktr_core.c optional bktr pci dev/bktr/bktr_i2c.c optional bktr pci smbus dev/bktr/bktr_os.c optional bktr pci dev/bktr/bktr_tuner.c optional bktr pci dev/bktr/msp34xx.c optional bktr pci dev/buslogic/bt.c optional bt dev/buslogic/bt_eisa.c optional bt eisa dev/buslogic/bt_isa.c optional bt isa dev/buslogic/bt_mca.c optional bt mca dev/buslogic/bt_pci.c optional bt pci dev/cardbus/cardbus.c optional cardbus dev/cardbus/cardbus_cis.c optional cardbus dev/cardbus/cardbus_device.c optional cardbus dev/ciss/ciss.c optional ciss dev/cm/smc90cx6.c optional cm dev/cnw/if_cnw.c optional cnw pccard dev/cpufreq/ichss.c optional cpufreq dev/cs/if_cs.c optional cs dev/cs/if_cs_isa.c optional cs isa dev/cs/if_cs_pccard.c optional cs pccard dev/cy/cy.c optional cy dev/cy/cy_isa.c optional cy isa dev/cy/cy_pci.c optional cy pci dev/dc/if_dc.c optional dc pci dev/dc/dcphy.c optional dc pci dev/dc/pnphy.c optional dc pci dev/dcons/dcons.c optional dcons dev/dcons/dcons_crom.c optional dcons_crom dev/dcons/dcons_os.c optional dcons dev/de/if_de.c optional de pci dev/digi/CX.c optional digi_CX dev/digi/CX_PCI.c optional digi_CX_PCI dev/digi/EPCX.c optional digi_EPCX dev/digi/EPCX_PCI.c optional digi_EPCX_PCI dev/digi/Xe.c optional digi_Xe dev/digi/Xem.c optional digi_Xem dev/digi/Xr.c optional digi_Xr dev/digi/digi.c optional digi dev/digi/digi_isa.c optional digi isa dev/digi/digi_pci.c optional digi pci dev/dpt/dpt_eisa.c optional dpt eisa dev/dpt/dpt_pci.c optional dpt pci dev/dpt/dpt_scsi.c optional dpt dev/drm/ati_pcigart.c optional drm dev/drm/drm_agpsupport.c optional drm dev/drm/drm_auth.c optional drm dev/drm/drm_bufs.c optional drm dev/drm/drm_context.c optional drm dev/drm/drm_dma.c optional drm dev/drm/drm_drawable.c optional drm dev/drm/drm_drv.c optional drm dev/drm/drm_fops.c optional drm dev/drm/drm_ioctl.c optional drm dev/drm/drm_irq.c optional drm dev/drm/drm_lock.c optional drm dev/drm/drm_memory.c optional drm dev/drm/drm_pci.c optional drm dev/drm/drm_scatter.c optional drm dev/drm/drm_sysctl.c optional drm dev/drm/drm_vm.c optional drm dev/drm/i915_dma.c optional i915drm dev/drm/i915_drv.c optional i915drm dev/drm/i915_irq.c optional i915drm dev/drm/i915_mem.c optional i915drm dev/drm/mach64_dma.c optional mach64drm dev/drm/mach64_drv.c optional mach64drm dev/drm/mach64_irq.c optional mach64drm dev/drm/mach64_state.c optional mach64drm dev/drm/mga_dma.c optional mgadrm dev/drm/mga_drv.c optional mgadrm dev/drm/mga_irq.c optional mgadrm dev/drm/mga_state.c optional mgadrm \ compile-with "${NORMAL_C} -finline-limit=13500" dev/drm/mga_warp.c optional mgadrm dev/drm/r128_cce.c optional r128drm dev/drm/r128_drv.c optional r128drm dev/drm/r128_irq.c optional r128drm dev/drm/r128_state.c optional r128drm \ compile-with "${NORMAL_C} -finline-limit=13500" dev/drm/r300_cmdbuf.c optional radeondrm dev/drm/radeon_cp.c optional radeondrm dev/drm/radeon_drv.c optional radeondrm dev/drm/radeon_irq.c optional radeondrm dev/drm/radeon_mem.c optional radeondrm dev/drm/radeon_state.c optional radeondrm dev/drm/savage_bci.c optional savagedrm dev/drm/savage_drv.c optional savagedrm dev/drm/savage_state.c optional savagedrm dev/drm/sis_drv.c optional sisdrm dev/drm/sis_ds.c optional sisdrm dev/drm/sis_mm.c optional sisdrm dev/drm/tdfx_drv.c optional tdfxdrm dev/ed/if_ed.c optional ed dev/ed/if_ed_novell.c optional ed dev/ed/if_ed_rtl80x9.c optional ed dev/ed/if_ed_pccard.c optional ed pccard dev/ed/if_ed_pci.c optional ed pci dev/eisa/eisa_if.m standard dev/eisa/eisaconf.c optional eisa dev/em/if_em.c optional em dev/em/if_em_hw.c optional em dev/en/if_en_pci.c optional en pci dev/en/midway.c optional en dev/ep/if_ep.c optional ep dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep pccard dev/esp/ncr53c9x.c optional esp dev/ex/if_ex.c optional ex dev/ex/if_ex_isa.c optional ex isa dev/ex/if_ex_pccard.c optional ex pccard dev/exca/exca.c optional cbb dev/fatm/if_fatm.c optional fatm pci +dev/fb/splash.c optional splash dev/fe/if_fe.c optional fe dev/fe/if_fe_pccard.c optional fe pccard dev/firewire/firewire.c optional firewire dev/firewire/fwcrom.c optional firewire dev/firewire/fwdev.c optional firewire dev/firewire/fwdma.c optional firewire dev/firewire/fwmem.c optional firewire dev/firewire/fwohci.c optional firewire dev/firewire/fwohci_pci.c optional firewire pci dev/firewire/if_fwe.c optional fwe dev/firewire/if_fwip.c optional fwip dev/firewire/sbp.c optional sbp dev/firewire/sbp_targ.c optional sbp_targ dev/flash/at45.c optional at45 dev/fxp/if_fxp.c optional fxp dev/gem/if_gem.c optional gem dev/gem/if_gem_pci.c optional gem pci dev/harp/if_harp.c optional harp pci dev/hatm/if_hatm.c optional hatm pci dev/hatm/if_hatm_intr.c optional hatm pci dev/hatm/if_hatm_ioctl.c optional hatm pci dev/hatm/if_hatm_rx.c optional hatm pci dev/hatm/if_hatm_tx.c optional hatm pci dev/hfa/fore_buffer.c optional hfa dev/hfa/fore_command.c optional hfa dev/hfa/fore_globals.c optional hfa dev/hfa/fore_if.c optional hfa dev/hfa/fore_init.c optional hfa dev/hfa/fore_intr.c optional hfa dev/hfa/fore_output.c optional hfa dev/hfa/fore_receive.c optional hfa dev/hfa/fore_stats.c optional hfa dev/hfa/fore_timer.c optional hfa dev/hfa/fore_transmit.c optional hfa dev/hfa/fore_vcm.c optional hfa #dev/hfa/hfa_eisa.c optional hfa eisa dev/hfa/hfa_freebsd.c optional hfa dev/hfa/hfa_pci.c optional hfa pci #dev/hfa/hfa_sbus.c optional hfa sbus dev/hifn/hifn7751.c optional hifn dev/hme/if_hme.c optional hme dev/hme/if_hme_pci.c optional hme pci dev/hme/if_hme_sbus.c optional hme sbus dev/hwpmc/hwpmc_logging.c optional hwpmc dev/hwpmc/hwpmc_mod.c optional hwpmc dev/ichsmb/ichsmb.c optional ichsmb dev/ichsmb/ichsmb_pci.c optional ichsmb pci dev/ida/ida.c optional ida dev/ida/ida_disk.c optional ida dev/ida/ida_eisa.c optional ida eisa dev/ida/ida_pci.c optional ida pci dev/ie/if_ie.c optional ie isa nowerror dev/ie/if_ie_isa.c optional ie isa dev/ieee488/ibfoo.c optional pcii | tnt4882 dev/ieee488/pcii.c optional pcii dev/ieee488/tnt4882.c optional tnt4882 dev/ieee488/upd7210.c optional pcii | tnt4882 dev/iicbus/if_ic.c optional ic dev/iicbus/iic.c optional iic dev/iicbus/iicbb.c optional iicbb dev/iicbus/iicbb_if.m optional iicbb dev/iicbus/iicbus.c optional iicbus dev/iicbus/iicbus_if.m optional iicbus dev/iicbus/iiconf.c optional iicbus dev/iicbus/iicsmb.c optional iicsmb \ dependency "iicbus_if.h" dev/iir/iir.c optional iir dev/iir/iir_ctrl.c optional iir dev/iir/iir_pci.c optional iir pci dev/ips/ips.c optional ips dev/ips/ips_commands.c optional ips dev/ips/ips_disk.c optional ips dev/ips/ips_ioctl.c optional ips dev/ips/ips_pci.c optional ips pci dev/ipw/if_ipw.c optional ipw dev/isp/isp.c optional isp dev/isp/isp_freebsd.c optional isp dev/isp/isp_library.c optional isp dev/isp/isp_pci.c optional isp pci dev/isp/isp_sbus.c optional isp sbus dev/isp/isp_target.c optional isp dev/ispfw/ispfw.c optional ispfw dev/iwi/if_iwi.c optional iwi dev/ixgb/if_ixgb.c optional ixgb dev/ixgb/ixgb_ee.c optional ixgb dev/ixgb/ixgb_hw.c optional ixgb dev/joy/joy.c optional joy dev/joy/joy_isa.c optional joy isa dev/joy/joy_pccard.c optional joy pccard dev/kbdmux/kbdmux.c optional kbdmux dev/le/am7990.c optional le dev/le/am79900.c optional le dev/le/if_le_pci.c optional le pci dev/le/lance.c optional le dev/led/led.c standard dev/lge/if_lge.c optional lge dev/lmc/if_lmc.c optional lmc dev/mc146818/mc146818.c optional mc146818 dev/mca/mca_bus.c optional mca dev/mcd/mcd.c optional mcd isa nowerror dev/mcd/mcd_isa.c optional mcd isa nowerror dev/md/md.c optional md dev/mem/memdev.c optional mem dev/mfi/mfi.c optional mfi dev/mfi/mfi_debug.c optional mfi dev/mfi/mfi_pci.c optional mfi pci dev/mfi/mfi_disk.c optional mfi dev/mfi/mfi_linux.c optional mfi compat_linux dev/mii/acphy.c optional miibus | acphy dev/mii/amphy.c optional miibus | amphy dev/mii/bmtphy.c optional miibus | bmtphy dev/mii/brgphy.c optional miibus | brgphy dev/mii/ciphy.c optional miibus | ciphy dev/mii/e1000phy.c optional miibus | e1000phy # XXX only xl cards? dev/mii/exphy.c optional miibus | exphy dev/mii/gentbi.c optional miibus | gentbi # XXX only fxp cards? dev/mii/inphy.c optional miibus | inphy dev/mii/ip1000phy.c optional miibus | ip1000phy dev/mii/lxtphy.c optional miibus | lxtphy dev/mii/mii.c optional miibus | mii dev/mii/mii_physubr.c optional miibus | mii dev/mii/miibus_if.m optional miibus | mii dev/mii/mlphy.c optional miibus | mlphy dev/mii/nsgphy.c optional miibus | nsgphy dev/mii/nsphy.c optional miibus | nsphy dev/mii/pnaphy.c optional miibus | pnaphy dev/mii/qsphy.c optional miibus | qsphy dev/mii/rgephy.c optional miibus | rgephy # XXX rl and re only? dev/mii/rlphy.c optional miibus | rlphy # XXX rue only? dev/mii/ruephy.c optional miibus | ruephy dev/mii/tdkphy.c optional miibus | tdkphy dev/mii/tlphy.c optional miibus | tlphy dev/mii/ukphy.c optional miibus | mii dev/mii/ukphy_subr.c optional miibus | mii dev/mii/xmphy.c optional miibus | xmphy dev/mk48txx/mk48txx.c optional mk48txx dev/mlx/mlx.c optional mlx dev/mlx/mlx_disk.c optional mlx dev/mlx/mlx_pci.c optional mlx pci dev/mly/mly.c optional mly dev/mmc/mmc.c optional mmc dev/mmc/mmcbr_if.m optional mmc dev/mmc/mmcbus_if.m optional mmc dev/mmc/mmcsd.c optional mmcsd dev/mpt/mpt.c optional mpt dev/mpt/mpt_cam.c optional mpt dev/mpt/mpt_debug.c optional mpt dev/mpt/mpt_pci.c optional mpt pci dev/mpt/mpt_raid.c optional mpt dev/my/if_my.c optional my dev/ncv/ncr53c500.c optional ncv dev/ncv/ncr53c500_pccard.c optional ncv pccard dev/nge/if_nge.c optional nge dev/nmdm/nmdm.c optional nmdm dev/nsp/nsp.c optional nsp dev/nsp/nsp_pccard.c optional nsp pccard dev/null/null.c standard dev/patm/if_patm.c optional patm pci dev/patm/if_patm_attach.c optional patm pci dev/patm/if_patm_intr.c optional patm pci dev/patm/if_patm_ioctl.c optional patm pci dev/patm/if_patm_rtables.c optional patm pci dev/patm/if_patm_rx.c optional patm pci dev/patm/if_patm_tx.c optional patm pci dev/pbio/pbio.c optional pbio isa dev/pccard/card_if.m standard dev/pccard/pccard.c optional pccard dev/pccard/pccard_cis.c optional pccard dev/pccard/pccard_cis_quirks.c optional pccard dev/pccard/pccard_device.c optional pccard dev/pccard/power_if.m standard dev/pccbb/pccbb.c optional cbb dev/pccbb/pccbb_isa.c optional cbb isa dev/pccbb/pccbb_pci.c optional cbb pci dev/pcf/pcf.c optional pcf dev/pci/eisa_pci.c optional pci eisa dev/pci/fixup_pci.c optional pci dev/pci/hostb_pci.c optional pci dev/pci/ignore_pci.c optional pci dev/pci/isa_pci.c optional pci isa dev/pci/pci.c optional pci dev/pci/pci_if.m standard dev/pci/pci_pci.c optional pci dev/pci/pci_user.c optional pci dev/pci/pcib_if.m standard dev/pci/vga_pci.c optional pci dev/pdq/if_fea.c optional fea eisa dev/pdq/if_fpa.c optional fpa pci dev/pdq/pdq.c optional nowerror fea eisa | fpa pci dev/pdq/pdq_ifsubr.c optional nowerror fea eisa | fpa pci dev/ppbus/if_plip.c optional plip dev/ppbus/immio.c optional vpo dev/ppbus/lpbb.c optional lpbb dev/ppbus/lpt.c optional lpt dev/ppbus/pcfclock.c optional pcfclock dev/ppbus/ppb_1284.c optional ppbus dev/ppbus/ppb_base.c optional ppbus dev/ppbus/ppb_msq.c optional ppbus dev/ppbus/ppbconf.c optional ppbus dev/ppbus/ppbus_if.m optional ppbus dev/ppbus/ppi.c optional ppi dev/ppbus/pps.c optional pps dev/ppbus/vpo.c optional vpo dev/ppbus/vpoio.c optional vpo dev/ppc/ppc.c optional ppc dev/ppc/ppc_acpi.c optional ppc acpi dev/ppc/ppc_isa.c optional ppc isa dev/ppc/ppc_pci.c optional ppc pci dev/ppc/ppc_puc.c optional ppc puc dev/pst/pst-iop.c optional pst dev/pst/pst-pci.c optional pst pci dev/pst/pst-raid.c optional pst dev/puc/puc.c optional puc dev/puc/puc_cfg.c optional puc dev/puc/puc_pccard.c optional puc pccard dev/puc/puc_pci.c optional puc pci dev/puc/pucdata.c optional puc pci dev/ral/rt2560.c optional ral dev/ral/rt2661.c optional ral dev/ral/if_ralrate.c optional ral dev/ral/if_ral_pci.c optional ral pci dev/random/harvest.c standard dev/random/hash.c optional random dev/random/probe.c optional random dev/random/randomdev.c optional random dev/random/randomdev_soft.c optional random dev/random/yarrow.c optional random dev/ray/if_ray.c optional ray pccard dev/rc/rc.c optional rc dev/re/if_re.c optional re dev/rndtest/rndtest.c optional rndtest dev/rp/rp.c optional rp dev/rp/rp_isa.c optional rp isa dev/rp/rp_pci.c optional rp pci dev/safe/safe.c optional safe dev/sbsh/if_sbsh.c optional sbsh dev/scc/scc_if.m optional scc dev/scc/scc_bfe_ebus.c optional scc ebus dev/scc/scc_bfe_sbus.c optional scc fhc | scc sbus dev/scc/scc_core.c optional scc dev/scc/scc_dev_sab82532.c optional scc dev/scc/scc_dev_z8530.c optional scc dev/scd/scd.c optional scd isa dev/scd/scd_isa.c optional scd isa dev/si/si.c optional si dev/si/si2_z280.c optional si dev/si/si3_t225.c optional si dev/si/si_eisa.c optional si eisa dev/si/si_isa.c optional si isa dev/si/si_pci.c optional si pci dev/sk/if_sk.c optional sk pci dev/smbus/smb.c optional smb dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smbus_if.m optional smbus dev/sn/if_sn.c optional sn dev/sn/if_sn_isa.c optional sn isa dev/sn/if_sn_pccard.c optional sn pccard dev/snp/snp.c optional snp dev/sound/isa/ad1816.c optional snd_ad1816 isa dev/sound/isa/ess.c optional snd_ess isa dev/sound/isa/gusc.c optional snd_gusc isa dev/sound/isa/mss.c optional snd_mss isa dev/sound/isa/sb16.c optional snd_sb16 isa dev/sound/isa/sb8.c optional snd_sb8 isa dev/sound/isa/sbc.c optional snd_sbc isa dev/sound/isa/sndbuf_dma.c optional sound isa dev/sound/pci/als4000.c optional snd_als4000 pci dev/sound/pci/atiixp.c optional snd_atiixp pci #dev/sound/pci/au88x0.c optional snd_au88x0 pci dev/sound/pci/cmi.c optional snd_cmi pci dev/sound/pci/cs4281.c optional snd_cs4281 pci dev/sound/pci/csa.c optional snd_csa pci \ warning "kernel contains GPL contaminated csaimg.h header" dev/sound/pci/csapcm.c optional snd_csa pci dev/sound/pci/ds1.c optional snd_ds1 pci dev/sound/pci/emu10k1.c optional snd_emu10k1 pci \ dependency "emu10k1-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10k1 headers" dev/sound/pci/emu10kx.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ dependency "p16v-alsa%diked.h" \ dependency "p17v-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/emu10kx-pcm.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ dependency "p16v-alsa%diked.h" \ dependency "p17v-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/emu10kx-midi.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/envy24.c optional snd_envy24 pci dev/sound/pci/envy24ht.c optional snd_envy24ht pci dev/sound/pci/es137x.c optional snd_es137x pci dev/sound/pci/fm801.c optional snd_fm801 pci dev/sound/pci/ich.c optional snd_ich pci dev/sound/pci/maestro.c optional snd_maestro pci dev/sound/pci/maestro3.c optional snd_maestro3 pci \ warning "kernel contains GPL contaminated maestro3 headers" dev/sound/pci/neomagic.c optional snd_neomagic pci dev/sound/pci/solo.c optional snd_solo pci dev/sound/pci/spicds.c optional snd_spicds pci dev/sound/pci/t4dwave.c optional snd_t4dwave pci dev/sound/pci/via8233.c optional snd_via8233 pci dev/sound/pci/via82c686.c optional snd_via82c686 pci dev/sound/pci/vibes.c optional snd_vibes pci dev/sound/pci/hda/hdac.c optional snd_hda pci dev/sound/pcm/ac97.c optional sound dev/sound/pcm/ac97_if.m optional sound dev/sound/pcm/ac97_patch.c optional sound dev/sound/pcm/buffer.c optional sound dev/sound/pcm/channel.c optional sound dev/sound/pcm/channel_if.m optional sound dev/sound/pcm/dsp.c optional sound dev/sound/pcm/fake.c optional sound dev/sound/pcm/feeder.c optional sound dev/sound/pcm/feeder_fmt.c optional sound dev/sound/pcm/feeder_if.m optional sound dev/sound/pcm/feeder_rate.c optional sound dev/sound/pcm/feeder_volume.c optional sound dev/sound/pcm/mixer.c optional sound dev/sound/pcm/mixer_if.m optional sound dev/sound/pcm/sndstat.c optional sound dev/sound/pcm/sound.c optional sound dev/sound/pcm/vchan.c optional sound #dev/sound/usb/upcm.c optional snd_upcm usb dev/sound/usb/uaudio.c optional snd_uaudio usb dev/sound/usb/uaudio_pcm.c optional snd_uaudio usb dev/sound/midi/midi.c optional sound dev/sound/midi/mpu401.c optional sound dev/sound/midi/mpu_if.m optional sound dev/sound/midi/mpufoi_if.m optional sound dev/sound/midi/sequencer.c optional sound dev/sound/midi/synth_if.m optional sound dev/spibus/spibus.c optional spibus \ dependency "spibus_if.h" dev/spibus/spibus_if.m optional spibus dev/sr/if_sr.c optional sr dev/sr/if_sr_pci.c optional sr pci dev/stg/tmc18c30.c optional stg dev/stg/tmc18c30_isa.c optional stg isa dev/stg/tmc18c30_pccard.c optional stg pccard dev/stg/tmc18c30_pci.c optional stg pci dev/stg/tmc18c30_subr.c optional stg dev/stge/if_stge.c optional stge dev/streams/streams.c optional streams dev/sym/sym_hipd.c optional sym \ dependency "$S/dev/sym/sym_{conf,defs}.h" dev/syscons/blank/blank_saver.c optional blank_saver dev/syscons/daemon/daemon_saver.c optional daemon_saver dev/syscons/dragon/dragon_saver.c optional dragon_saver dev/syscons/fade/fade_saver.c optional fade_saver dev/syscons/fire/fire_saver.c optional fire_saver dev/syscons/green/green_saver.c optional green_saver dev/syscons/logo/logo.c optional logo_saver dev/syscons/logo/logo_saver.c optional logo_saver dev/syscons/rain/rain_saver.c optional rain_saver dev/syscons/schistory.c optional sc dev/syscons/scmouse.c optional sc dev/syscons/scterm-dumb.c optional sc dev/syscons/scterm.c optional sc dev/syscons/scvidctl.c optional sc dev/syscons/snake/snake_saver.c optional snake_saver dev/syscons/star/star_saver.c optional star_saver dev/syscons/syscons.c optional sc dev/syscons/sysmouse.c optional sc dev/syscons/warp/warp_saver.c optional warp_saver dev/tdfx/tdfx_linux.c optional tdfx_linux tdfx compat_linux dev/tdfx/tdfx_pci.c optional tdfx pci dev/ti/if_ti.c optional ti pci dev/trm/trm.c optional trm dev/twa/tw_cl_fwimg.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_init.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_intr.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_io.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_misc.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_cam.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_freebsd.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twe/twe.c optional twe dev/twe/twe_freebsd.c optional twe dev/tx/if_tx.c optional tx dev/txp/if_txp.c optional txp dev/uart/uart_bus_acpi.c optional uart acpi #dev/uart/uart_bus_cbus.c optional uart cbus dev/uart/uart_bus_ebus.c optional uart ebus dev/uart/uart_bus_isa.c optional uart isa dev/uart/uart_bus_pccard.c optional uart pccard dev/uart/uart_bus_pci.c optional uart pci dev/uart/uart_bus_puc.c optional uart puc dev/uart/uart_bus_scc.c optional uart scc dev/uart/uart_core.c optional uart dev/uart/uart_dbg.c optional uart gdb dev/uart/uart_dev_ns8250.c optional uart uart_ns8250 dev/uart/uart_dev_sab82532.c optional uart uart_sab82532 dev/uart/uart_dev_sab82532.c optional uart scc dev/uart/uart_dev_z8530.c optional uart uart_z8530 dev/uart/uart_dev_z8530.c optional uart scc dev/uart/uart_if.m optional uart dev/uart/uart_subr.c optional uart dev/uart/uart_tty.c optional uart dev/ubsec/ubsec.c optional ubsec # # USB support dev/usb/ehci.c optional ehci dev/usb/ehci_pci.c optional ehci pci dev/usb/hid.c optional usb dev/usb/if_aue.c optional aue dev/usb/if_axe.c optional axe dev/usb/if_cdce.c optional cdce dev/usb/if_cue.c optional cue dev/usb/if_kue.c optional kue dev/usb/if_ural.c optional ural dev/usb/if_rue.c optional rue dev/usb/if_udav.c optional udav dev/usb/ohci.c optional ohci dev/usb/ohci_pci.c optional ohci pci dev/usb/sl811hs.c optional slhci dev/usb/slhci_pccard.c optional slhci pccard dev/usb/ubsa.c optional ubsa dev/usb/ubser.c optional ubser dev/usb/ucom.c optional ucom dev/usb/ucycom.c optional ucycom dev/usb/udbp.c optional udbp dev/usb/ufoma.c optional ufoma dev/usb/ufm.c optional ufm dev/usb/uftdi.c optional uftdi dev/usb/ugen.c optional ugen dev/usb/uhci.c optional uhci dev/usb/uhci_pci.c optional uhci pci dev/usb/uhid.c optional uhid dev/usb/uhub.c optional usb dev/usb/ukbd.c optional ukbd dev/usb/ulpt.c optional ulpt dev/usb/umass.c optional umass dev/usb/umct.c optional umct dev/usb/umodem.c optional umodem dev/usb/ums.c optional ums dev/usb/uplcom.c optional uplcom dev/usb/urio.c optional urio dev/usb/usb.c optional usb dev/usb/usb_ethersubr.c optional usb dev/usb/usb_if.m optional usb dev/usb/usb_mem.c optional usb dev/usb/usb_quirks.c optional usb dev/usb/usb_subr.c optional usb dev/usb/usbdi.c optional usb dev/usb/usbdi_util.c optional usb dev/usb/uscanner.c optional uscanner dev/usb/uvisor.c optional uvisor dev/usb/uvscom.c optional uvscom dev/utopia/idtphy.c optional utopia dev/utopia/suni.c optional utopia dev/utopia/utopia.c optional utopia dev/vge/if_vge.c optional vge dev/vkbd/vkbd.c optional vkbd dev/vx/if_vx.c optional vx dev/vx/if_vx_eisa.c optional vx eisa dev/vx/if_vx_pci.c optional vx pci dev/watchdog/watchdog.c standard dev/wds/wd7000.c optional wds isa dev/wi/if_wi.c optional wi dev/wi/if_wi_pccard.c optional wi pccard dev/wi/if_wi_pci.c optional wi pci dev/wl/if_wl.c optional wl isa dev/xe/if_xe.c optional xe dev/xe/if_xe_pccard.c optional xe pccard fs/deadfs/dead_vnops.c standard fs/devfs/devfs_devs.c standard fs/devfs/devfs_rule.c standard fs/devfs/devfs_vfsops.c standard fs/devfs/devfs_vnops.c standard fs/fdescfs/fdesc_vfsops.c optional fdescfs fs/fdescfs/fdesc_vnops.c optional fdescfs fs/fifofs/fifo_vnops.c standard fs/hpfs/hpfs_alsubr.c optional hpfs fs/hpfs/hpfs_lookup.c optional hpfs fs/hpfs/hpfs_subr.c optional hpfs fs/hpfs/hpfs_vfsops.c optional hpfs fs/hpfs/hpfs_vnops.c optional hpfs fs/msdosfs/msdosfs_conv.c optional msdosfs fs/msdosfs/msdosfs_denode.c optional msdosfs fs/msdosfs/msdosfs_fat.c optional msdosfs fs/msdosfs/msdosfs_fileno.c optional msdosfs_large fs/msdosfs/msdosfs_iconv.c optional msdosfs_iconv fs/msdosfs/msdosfs_lookup.c optional msdosfs fs/msdosfs/msdosfs_vfsops.c optional msdosfs fs/msdosfs/msdosfs_vnops.c optional msdosfs fs/ntfs/ntfs_compr.c optional ntfs fs/ntfs/ntfs_iconv.c optional ntfs_iconv fs/ntfs/ntfs_ihash.c optional ntfs fs/ntfs/ntfs_subr.c optional ntfs fs/ntfs/ntfs_vfsops.c optional ntfs fs/ntfs/ntfs_vnops.c optional ntfs fs/nullfs/null_subr.c optional nullfs fs/nullfs/null_vfsops.c optional nullfs fs/nullfs/null_vnops.c optional nullfs fs/nwfs/nwfs_io.c optional nwfs fs/nwfs/nwfs_ioctl.c optional nwfs fs/nwfs/nwfs_node.c optional nwfs fs/nwfs/nwfs_subr.c optional nwfs fs/nwfs/nwfs_vfsops.c optional nwfs fs/nwfs/nwfs_vnops.c optional nwfs fs/portalfs/portal_vfsops.c optional portalfs fs/portalfs/portal_vnops.c optional portalfs fs/procfs/procfs.c optional procfs fs/procfs/procfs_ctl.c optional procfs fs/procfs/procfs_dbregs.c optional procfs fs/procfs/procfs_fpregs.c optional procfs fs/procfs/procfs_ioctl.c optional procfs fs/procfs/procfs_map.c optional procfs fs/procfs/procfs_mem.c optional procfs fs/procfs/procfs_note.c optional procfs fs/procfs/procfs_regs.c optional procfs fs/procfs/procfs_rlimit.c optional procfs fs/procfs/procfs_status.c optional procfs fs/procfs/procfs_type.c optional procfs fs/pseudofs/pseudofs.c optional pseudofs fs/pseudofs/pseudofs_fileno.c optional pseudofs fs/pseudofs/pseudofs_vncache.c optional pseudofs fs/pseudofs/pseudofs_vnops.c optional pseudofs fs/smbfs/smbfs_io.c optional smbfs fs/smbfs/smbfs_node.c optional smbfs fs/smbfs/smbfs_smb.c optional smbfs fs/smbfs/smbfs_subr.c optional smbfs fs/smbfs/smbfs_vfsops.c optional smbfs fs/smbfs/smbfs_vnops.c optional smbfs fs/udf/osta.c optional udf fs/udf/udf_iconv.c optional udf_iconv fs/udf/udf_vfsops.c optional udf fs/udf/udf_vnops.c optional udf fs/umapfs/umap_subr.c optional umapfs fs/umapfs/umap_vfsops.c optional umapfs fs/umapfs/umap_vnops.c optional umapfs fs/unionfs/union_subr.c optional unionfs fs/unionfs/union_vfsops.c optional unionfs fs/unionfs/union_vnops.c optional unionfs gdb/gdb_cons.c optional gdb gdb/gdb_main.c optional gdb gdb/gdb_packet.c optional gdb geom/bde/g_bde.c optional geom_bde geom/bde/g_bde_crypt.c optional geom_bde geom/bde/g_bde_lock.c optional geom_bde geom/bde/g_bde_work.c optional geom_bde geom/cache/g_cache.c optional geom_cache geom/concat/g_concat.c optional geom_concat geom/eli/g_eli.c optional geom_eli geom/eli/g_eli_crypto.c optional geom_eli geom/eli/g_eli_ctl.c optional geom_eli geom/eli/g_eli_integrity.c optional geom_eli geom/eli/g_eli_key.c optional geom_eli geom/eli/g_eli_privacy.c optional geom_eli geom/eli/pkcs5v2.c optional geom_eli geom/gate/g_gate.c optional geom_gate geom/geom_aes.c optional geom_aes geom/geom_apple.c optional geom_apple geom/geom_bsd.c optional geom_bsd geom/geom_bsd_enc.c optional geom_bsd geom/geom_ccd.c optional ccd | geom_ccd geom/geom_ctl.c standard geom/geom_dev.c standard geom/geom_disk.c standard geom/geom_dump.c standard geom/geom_event.c standard geom/geom_fox.c optional geom_fox geom/geom_gpt.c optional geom_gpt geom/geom_io.c standard geom/geom_kern.c standard geom/geom_mbr.c optional geom_mbr geom/geom_mbr_enc.c optional geom_mbr geom/geom_pc98.c optional geom_pc98 geom/geom_pc98_enc.c optional geom_pc98 geom/geom_slice.c standard geom/geom_subr.c standard geom/geom_sunlabel.c optional geom_sunlabel geom/geom_sunlabel_enc.c optional geom_sunlabel geom/geom_vfs.c standard geom/geom_vol_ffs.c optional geom_vol geom/label/g_label.c optional geom_label geom/label/g_label_ext2fs.c optional geom_label geom/label/g_label_iso9660.c optional geom_label geom/label/g_label_msdosfs.c optional geom_label geom/label/g_label_ntfs.c optional geom_label geom/label/g_label_reiserfs.c optional geom_label geom/label/g_label_ufs.c optional geom_label geom/mirror/g_mirror.c optional geom_mirror geom/mirror/g_mirror_ctl.c optional geom_mirror geom/nop/g_nop.c optional geom_nop geom/raid3/g_raid3.c optional geom_raid3 geom/raid3/g_raid3_ctl.c optional geom_raid3 geom/shsec/g_shsec.c optional geom_shsec geom/stripe/g_stripe.c optional geom_stripe geom/uzip/g_uzip.c optional geom_uzip geom/zero/g_zero.c optional geom_zero gnu/fs/ext2fs/ext2_alloc.c optional ext2fs \ warning "kernel contains GPL contaminated ext2fs filesystem" gnu/fs/ext2fs/ext2_balloc.c optional ext2fs gnu/fs/ext2fs/ext2_bmap.c optional ext2fs gnu/fs/ext2fs/ext2_inode.c optional ext2fs gnu/fs/ext2fs/ext2_inode_cnv.c optional ext2fs gnu/fs/ext2fs/ext2_linux_balloc.c optional ext2fs gnu/fs/ext2fs/ext2_linux_ialloc.c optional ext2fs gnu/fs/ext2fs/ext2_lookup.c optional ext2fs gnu/fs/ext2fs/ext2_subr.c optional ext2fs gnu/fs/ext2fs/ext2_vfsops.c optional ext2fs gnu/fs/ext2fs/ext2_vnops.c optional ext2fs gnu/fs/reiserfs/reiserfs_hashes.c optional reiserfs \ warning "kernel contains GPL contaminated ReiserFS filesystem" gnu/fs/reiserfs/reiserfs_inode.c optional reiserfs gnu/fs/reiserfs/reiserfs_item_ops.c optional reiserfs gnu/fs/reiserfs/reiserfs_namei.c optional reiserfs gnu/fs/reiserfs/reiserfs_prints.c optional reiserfs gnu/fs/reiserfs/reiserfs_stree.c optional reiserfs gnu/fs/reiserfs/reiserfs_vfsops.c optional reiserfs gnu/fs/reiserfs/reiserfs_vnops.c optional reiserfs # # isdn4bsd device drivers # i4b/driver/i4b_trace.c optional i4btrc i4b/driver/i4b_rbch.c optional i4brbch i4b/driver/i4b_tel.c optional i4btel i4b/driver/i4b_ipr.c optional i4bipr net/slcompress.c optional i4bipr | i4bisppp i4b/driver/i4b_ctl.c optional i4bctl i4b/driver/i4b_ing.c optional i4bing i4b/driver/i4b_isppp.c optional i4bisppp # # isdn4bsd CAPI driver # i4b/capi/capi_l4if.c optional i4bcapi i4b/capi/capi_llif.c optional i4bcapi i4b/capi/capi_msgs.c optional i4bcapi # # isdn4bsd AVM B1/T1 CAPI driver # i4b/capi/iavc/iavc_pci.c optional iavc i4bcapi pci i4b/capi/iavc/iavc_isa.c optional iavc i4bcapi isa i4b/capi/iavc/iavc_lli.c optional iavc i4bcapi i4b/capi/iavc/iavc_card.c optional iavc i4bcapi # # isdn4bsd support # i4b/layer2/i4b_mbuf.c optional i4btrc # # isdn4bsd Q.921 handler # i4b/layer2/i4b_l2.c optional i4bq921 i4b/layer2/i4b_l2fsm.c optional i4bq921 i4b/layer2/i4b_uframe.c optional i4bq921 i4b/layer2/i4b_tei.c optional i4bq921 i4b/layer2/i4b_sframe.c optional i4bq921 i4b/layer2/i4b_iframe.c optional i4bq921 i4b/layer2/i4b_l2timer.c optional i4bq921 i4b/layer2/i4b_util.c optional i4bq921 i4b/layer2/i4b_lme.c optional i4bq921 # # isdn4bsd Q.931 handler # i4b/layer3/i4b_q931.c optional i4bq931 i4b/layer3/i4b_l3fsm.c optional i4bq931 i4b/layer3/i4b_l3timer.c optional i4bq931 i4b/layer3/i4b_l2if.c optional i4bq931 i4b/layer3/i4b_l4if.c optional i4bq931 i4b/layer3/i4b_q932fac.c optional i4bq931 # # isdn4bsd control device driver, interface to isdnd # i4b/layer4/i4b_i4bdrv.c optional i4b i4b/layer4/i4b_l4.c optional i4b i4b/layer4/i4b_l4mgmt.c optional i4b i4b/layer4/i4b_l4timer.c optional i4b # isa/isa_if.m standard isa/isa_common.c optional isa isa/isahint.c optional isa isa/orm.c optional isa isa/pnp.c optional isa isapnp isa/pnpparse.c optional isa isapnp isofs/cd9660/cd9660_bmap.c optional cd9660 isofs/cd9660/cd9660_lookup.c optional cd9660 isofs/cd9660/cd9660_node.c optional cd9660 isofs/cd9660/cd9660_rrip.c optional cd9660 isofs/cd9660/cd9660_util.c optional cd9660 isofs/cd9660/cd9660_vfsops.c optional cd9660 isofs/cd9660/cd9660_vnops.c optional cd9660 isofs/cd9660/cd9660_iconv.c optional cd9660_iconv kern/bus_if.m standard kern/clock_if.m optional genclock kern/cpufreq_if.m standard kern/device_if.m standard kern/imgact_elf.c standard kern/imgact_shell.c standard kern/inflate.c optional gzip kern/init_main.c standard kern/init_sysent.c standard kern/kern_acct.c standard kern/kern_acl.c standard kern/kern_alq.c optional alq kern/kern_clock.c standard kern/kern_condvar.c standard kern/kern_conf.c standard kern/kern_cpu.c standard kern/kern_context.c standard kern/kern_descrip.c standard kern/kern_environment.c standard kern/kern_event.c standard kern/kern_exec.c standard kern/kern_exit.c standard kern/kern_fork.c standard kern/kern_idle.c standard kern/kern_intr.c standard kern/kern_jail.c standard kern/kern_kse.c standard kern/kern_kthread.c standard kern/kern_ktr.c optional ktr kern/kern_ktrace.c standard kern/kern_linker.c standard kern/kern_lock.c standard kern/kern_lockf.c standard kern/kern_mac.c standard kern/kern_malloc.c standard kern/kern_mbuf.c standard kern/kern_mib.c standard kern/kern_module.c standard kern/kern_mtxpool.c standard kern/kern_mutex.c standard kern/kern_ntptime.c standard kern/kern_physio.c standard kern/kern_pmc.c standard kern/kern_poll.c optional device_polling kern/kern_proc.c standard kern/kern_prot.c standard kern/kern_resource.c standard kern/kern_rwlock.c standard kern/kern_sema.c standard kern/kern_shutdown.c standard kern/kern_sig.c standard kern/kern_subr.c standard kern/kern_sx.c standard kern/kern_synch.c standard kern/kern_syscalls.c standard kern/kern_sysctl.c standard kern/kern_tc.c standard kern/kern_thr.c standard kern/kern_thread.c standard kern/kern_time.c standard kern/kern_timeout.c standard kern/kern_umtx.c standard kern/kern_uuid.c standard kern/kern_xxx.c standard kern/link_elf.c standard kern/linker_if.m standard kern/md4c.c optional netsmb kern/md5c.c standard kern/sched_4bsd.c optional sched_4bsd kern/sched_core.c optional sched_core kern/sched_ule.c optional sched_ule kern/serdev_if.m optional puc | scc kern/subr_acl_posix1e.c standard kern/subr_autoconf.c standard kern/subr_blist.c standard kern/subr_bus.c standard kern/subr_clock.c standard kern/subr_devstat.c standard kern/subr_disk.c standard kern/subr_eventhandler.c standard kern/subr_fattime.c standard kern/subr_firmware.c optional firmware kern/subr_hints.c standard kern/subr_kdb.c standard kern/subr_kobj.c standard kern/subr_lock.c standard kern/subr_log.c standard kern/subr_mbpool.c optional libmbpool kern/subr_mchain.c optional libmchain kern/subr_module.c standard kern/subr_msgbuf.c standard kern/subr_param.c standard kern/subr_pcpu.c standard kern/subr_power.c standard kern/subr_prf.c standard kern/subr_prof.c standard kern/subr_rman.c standard kern/subr_rtc.c optional genclock kern/subr_sbuf.c standard kern/subr_scanf.c standard kern/subr_sleepqueue.c standard kern/subr_smp.c standard kern/subr_stack.c optional ddb kern/subr_taskqueue.c standard kern/subr_trap.c standard kern/subr_turnstile.c standard kern/subr_unit.c standard kern/subr_witness.c optional witness kern/sys_generic.c standard kern/sys_pipe.c standard kern/sys_process.c standard kern/sys_socket.c standard kern/syscalls.c optional witness | invariants kern/sysv_ipc.c standard kern/sysv_msg.c optional sysvmsg kern/sysv_sem.c optional sysvsem kern/sysv_shm.c optional sysvshm kern/tty.c standard kern/tty_compat.c optional compat_43tty kern/tty_conf.c standard kern/tty_cons.c standard kern/tty_pty.c optional pty kern/tty_pts.c optional pty kern/tty_subr.c standard kern/tty_tty.c standard kern/uipc_accf.c optional inet kern/uipc_cow.c optional zero_copy_sockets kern/uipc_domain.c standard kern/uipc_mbuf.c standard kern/uipc_mbuf2.c standard kern/uipc_mqueue.c optional p1003_1b_mqueue kern/uipc_sem.c optional p1003_1b_semaphores kern/uipc_sockbuf.c standard kern/uipc_socket.c standard kern/uipc_socket2.c standard kern/uipc_syscalls.c standard kern/uipc_usrreq.c standard kern/vfs_aio.c optional vfs_aio kern/vfs_bio.c standard kern/vfs_cache.c standard kern/vfs_cluster.c standard kern/vfs_default.c standard kern/vfs_export.c standard kern/vfs_hash.c standard kern/vfs_init.c standard kern/vfs_lookup.c standard kern/vfs_mount.c standard kern/vfs_subr.c standard kern/vfs_syscalls.c standard kern/vfs_vnops.c standard # # These files in libkern/ are those needed by all architectures. Some # of the files in libkern/ are only needed on some architectures, e.g., # libkern/divdi3.c is needed by i386 but not alpha. Also, some of these # routines may be optimized for a particular platform. In either case, # the file should be moved to conf/files. from here. # libkern/arc4random.c standard libkern/bcd.c standard libkern/bsearch.c standard libkern/crc32.c standard libkern/fnmatch.c standard libkern/gets.c standard libkern/iconv.c optional libiconv libkern/iconv_converter_if.m optional libiconv libkern/iconv_xlat.c optional libiconv libkern/iconv_xlat16.c optional libiconv libkern/index.c standard libkern/inet_ntoa.c standard libkern/mcount.c optional profiling-routine libkern/qsort.c standard libkern/qsort_r.c standard libkern/random.c standard libkern/rindex.c standard libkern/scanc.c standard libkern/skpc.c standard libkern/strcasecmp.c standard libkern/strcat.c standard libkern/strcmp.c standard libkern/strcpy.c standard libkern/strdup.c standard libkern/strlcat.c standard libkern/strlcpy.c standard libkern/strlen.c standard libkern/strncmp.c standard libkern/strncpy.c standard libkern/strsep.c standard libkern/strspn.c standard libkern/strstr.c standard libkern/strtol.c standard libkern/strtoq.c standard libkern/strtoul.c standard libkern/strtouq.c standard libkern/strvalid.c standard net/bpf.c standard net/bpf_jitter.c optional bpf_jitter net/bpf_filter.c optional bpf | netgraph_bpf net/bridgestp.c optional if_bridge net/bsd_comp.c optional ppp_bsdcomp net/if.c standard net/if_arcsubr.c optional arcnet net/if_atmsubr.c optional atm net/if_bridge.c optional if_bridge net/if_clone.c standard net/if_disc.c optional disc net/if_ef.c optional ef net/if_enc.c optional enc net/if_ethersubr.c optional ether net/if_faith.c optional faith net/if_fddisubr.c optional fddi net/if_fwsubr.c optional fwip net/if_gif.c optional gif net/if_gre.c optional gre net/if_iso88025subr.c optional token net/if_loop.c optional loop net/if_media.c standard net/if_mib.c standard net/if_ppp.c optional ppp net/if_sl.c optional sl net/if_spppfr.c optional i4bisppp | sppp net/if_spppsubr.c optional i4bisppp | sppp net/if_stf.c optional stf net/if_tun.c optional tun net/if_tap.c optional tap net/if_vlan.c optional vlan net/netisr.c standard net/ppp_deflate.c optional ppp_deflate net/ppp_tty.c optional ppp net/pfil.c optional ether | inet net/radix.c standard net/raw_cb.c standard net/raw_usrreq.c standard net/route.c standard net/rtsock.c standard net/slcompress.c optional netgraph_vjc | ppp | sl | sppp net/zlib.c optional crypto | geom_uzip | ipsec | \ ppp_deflate net80211/ieee80211.c optional wlan net80211/ieee80211_acl.c optional wlan_acl net80211/ieee80211_crypto.c optional wlan net80211/ieee80211_crypto_ccmp.c optional wlan_ccmp net80211/ieee80211_crypto_none.c optional wlan net80211/ieee80211_crypto_tkip.c optional wlan_tkip net80211/ieee80211_crypto_wep.c optional wlan_wep net80211/ieee80211_freebsd.c optional wlan net80211/ieee80211_input.c optional wlan net80211/ieee80211_ioctl.c optional wlan net80211/ieee80211_node.c optional wlan net80211/ieee80211_output.c optional wlan net80211/ieee80211_proto.c optional wlan net80211/ieee80211_xauth.c optional wlan_xauth netatalk/aarp.c optional netatalk netatalk/at_control.c optional netatalk netatalk/at_proto.c optional netatalk netatalk/at_rmx.c optional netatalkdebug netatalk/ddp_input.c optional netatalk netatalk/ddp_output.c optional netatalk netatalk/ddp_pcb.c optional netatalk netatalk/ddp_usrreq.c optional netatalk netatm/atm_aal5.c optional atm_core netatm/atm_cm.c optional atm_core netatm/atm_device.c optional atm_core netatm/atm_if.c optional atm_core netatm/atm_proto.c optional atm_core netatm/atm_signal.c optional atm_core netatm/atm_socket.c optional atm_core netatm/atm_subr.c optional atm_core netatm/atm_usrreq.c optional atm_core netatm/ipatm/ipatm_event.c optional atm_ip atm_core netatm/ipatm/ipatm_if.c optional atm_ip atm_core netatm/ipatm/ipatm_input.c optional atm_ip atm_core netatm/ipatm/ipatm_load.c optional atm_ip atm_core netatm/ipatm/ipatm_output.c optional atm_ip atm_core netatm/ipatm/ipatm_usrreq.c optional atm_ip atm_core netatm/ipatm/ipatm_vcm.c optional atm_ip atm_core netatm/sigpvc/sigpvc_if.c optional atm_sigpvc atm_core netatm/sigpvc/sigpvc_subr.c optional atm_sigpvc atm_core netatm/spans/spans_arp.c optional atm_spans atm_core \ dependency "spans_xdr.h" netatm/spans/spans_cls.c optional atm_spans atm_core netatm/spans/spans_if.c optional atm_spans atm_core netatm/spans/spans_kxdr.c optional atm_spans atm_core netatm/spans/spans_msg.c optional atm_spans atm_core netatm/spans/spans_print.c optional atm_spans atm_core netatm/spans/spans_proto.c optional atm_spans atm_core netatm/spans/spans_subr.c optional atm_spans atm_core netatm/spans/spans_util.c optional atm_spans atm_core spans_xdr.h optional atm_spans atm_core \ before-depend \ dependency "$S/netatm/spans/spans_xdr.x" \ compile-with "rpcgen -h -C $S/netatm/spans/spans_xdr.x | grep -v rpc/rpc.h > spans_xdr.h" \ clean "spans_xdr.h" \ no-obj no-implicit-rule spans_xdr.c optional atm_spans atm_core \ before-depend \ dependency "$S/netatm/spans/spans_xdr.x" \ compile-with "rpcgen -c -C $S/netatm/spans/spans_xdr.x | grep -v rpc/rpc.h > spans_xdr.c" \ clean "spans_xdr.c" \ no-obj no-implicit-rule local spans_xdr.o optional atm_spans atm_core \ dependency "$S/netatm/spans/spans_xdr.x" \ compile-with "${NORMAL_C}" \ no-implicit-rule local netatm/uni/q2110_sigaa.c optional atm_uni atm_core netatm/uni/q2110_sigcpcs.c optional atm_uni atm_core netatm/uni/q2110_subr.c optional atm_uni atm_core netatm/uni/qsaal1_sigaa.c optional atm_uni atm_core netatm/uni/qsaal1_sigcpcs.c optional atm_uni atm_core netatm/uni/qsaal1_subr.c optional atm_uni atm_core netatm/uni/sscf_uni.c optional atm_uni atm_core netatm/uni/sscf_uni_lower.c optional atm_uni atm_core netatm/uni/sscf_uni_upper.c optional atm_uni atm_core netatm/uni/sscop.c optional atm_uni atm_core netatm/uni/sscop_lower.c optional atm_uni atm_core netatm/uni/sscop_pdu.c optional atm_uni atm_core netatm/uni/sscop_sigaa.c optional atm_uni atm_core netatm/uni/sscop_sigcpcs.c optional atm_uni atm_core netatm/uni/sscop_subr.c optional atm_uni atm_core netatm/uni/sscop_timer.c optional atm_uni atm_core netatm/uni/sscop_upper.c optional atm_uni atm_core netatm/uni/uni_load.c optional atm_uni atm_core netatm/uni/uniarp.c optional atm_uni atm_core netatm/uni/uniarp_cache.c optional atm_uni atm_core netatm/uni/uniarp_input.c optional atm_uni atm_core netatm/uni/uniarp_output.c optional atm_uni atm_core netatm/uni/uniarp_timer.c optional atm_uni atm_core netatm/uni/uniarp_vcm.c optional atm_uni atm_core netatm/uni/uniip.c optional atm_uni atm_core netatm/uni/unisig_decode.c optional atm_uni atm_core netatm/uni/unisig_encode.c optional atm_uni atm_core netatm/uni/unisig_if.c optional atm_uni atm_core netatm/uni/unisig_mbuf.c optional atm_uni atm_core netatm/uni/unisig_msg.c optional atm_uni atm_core netatm/uni/unisig_print.c optional atm_uni atm_core netatm/uni/unisig_proto.c optional atm_uni atm_core netatm/uni/unisig_sigmgr_state.c optional atm_uni atm_core netatm/uni/unisig_subr.c optional atm_uni atm_core netatm/uni/unisig_util.c optional atm_uni atm_core netatm/uni/unisig_vc_state.c optional atm_uni atm_core netgraph/atm/atmpif/ng_atmpif.c optional netgraph_atm_atmpif netgraph/atm/atmpif/ng_atmpif_harp.c optional netgraph_atm_atmpif netgraph/atm/ccatm/ng_ccatm.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/ng_atm.c optional ngatm_atm netgraph/atm/ngatmbase.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscfu/ng_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscop/ng_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/uni/ng_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/bluetooth/common/ng_bluetooth.c optional netgraph_bluetooth netgraph/bluetooth/drivers/bt3c/ng_bt3c_pccard.c optional netgraph_bluetooth_bt3c netgraph/bluetooth/drivers/h4/ng_h4.c optional netgraph_bluetooth_h4 netgraph/bluetooth/drivers/ubt/ng_ubt.c optional netgraph_bluetooth_ubt netgraph/bluetooth/drivers/ubtbcmfw/ubtbcmfw.c optional netgraph_bluetooth_ubtbcmfw netgraph/bluetooth/hci/ng_hci_cmds.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_evnt.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_main.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_misc.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_ulpi.c optional netgraph_bluetooth_hci netgraph/bluetooth/l2cap/ng_l2cap_cmds.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_evnt.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_llpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_main.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_misc.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_ulpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/socket/ng_btsocket.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_hci_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_rfcomm.c optional netgraph_bluetooth_socket netgraph/netflow/netflow.c optional netgraph_netflow netgraph/netflow/ng_netflow.c optional netgraph_netflow netgraph/ng_UI.c optional netgraph_UI netgraph/ng_async.c optional netgraph_async netgraph/ng_atmllc.c optional netgraph_atmllc netgraph/ng_base.c optional netgraph netgraph/ng_bpf.c optional netgraph_bpf netgraph/ng_bridge.c optional netgraph_bridge netgraph/ng_cisco.c optional netgraph_cisco netgraph/ng_device.c optional netgraph_device netgraph/ng_echo.c optional netgraph_echo netgraph/ng_eiface.c optional netgraph_eiface netgraph/ng_ether.c optional netgraph_ether netgraph/ng_fec.c optional netgraph_fec netgraph/ng_frame_relay.c optional netgraph_frame_relay netgraph/ng_gif.c optional netgraph_gif netgraph/ng_gif_demux.c optional netgraph_gif_demux netgraph/ng_hole.c optional netgraph_hole netgraph/ng_iface.c optional netgraph_iface netgraph/ng_ip_input.c optional netgraph_ip_input netgraph/ng_ipfw.c optional netgraph_ipfw netgraph/ng_ksocket.c optional netgraph_ksocket netgraph/ng_l2tp.c optional netgraph_l2tp netgraph/ng_lmi.c optional netgraph_lmi netgraph/ng_mppc.c optional netgraph_mppc_compression | \ netgraph_mppc_encryption netgraph/ng_nat.c optional netgraph_nat netgraph/ng_one2many.c optional netgraph_one2many netgraph/ng_parse.c optional netgraph netgraph/ng_ppp.c optional netgraph_ppp netgraph/ng_pppoe.c optional netgraph_pppoe netgraph/ng_pptpgre.c optional netgraph_pptpgre netgraph/ng_rfc1490.c optional netgraph_rfc1490 netgraph/ng_socket.c optional netgraph_socket netgraph/ng_split.c optional netgraph_split netgraph/ng_sppp.c optional netgraph_sppp netgraph/ng_tag.c optional netgraph_tag netgraph/ng_tcpmss.c optional netgraph_tcpmss netgraph/ng_tee.c optional netgraph_tee netgraph/ng_tty.c optional netgraph_tty netgraph/ng_vjc.c optional netgraph_vjc netinet/accf_data.c optional accept_filter_data netinet/accf_http.c optional accept_filter_http netinet/if_atm.c optional atm netinet/if_ether.c optional ether netinet/igmp.c optional inet netinet/in.c optional inet netinet/ip_carp.c optional carp netinet/in_gif.c optional gif inet netinet/ip_gre.c optional gre inet netinet/ip_id.c optional inet netinet/in_pcb.c optional inet netinet/in_proto.c optional inet \ compile-with "${NORMAL_C} -I$S/contrib/pf" netinet/in_rmx.c optional inet netinet/ip_divert.c optional ipdivert netinet/ip_dummynet.c optional dummynet netinet/ip_ecn.c optional inet | inet6 netinet/ip_encap.c optional inet | inet6 netinet/ip_fastfwd.c optional inet netinet/ip_fw2.c optional ipfirewall netinet/ip_fw_pfil.c optional ipfirewall netinet/ip_icmp.c optional inet netinet/ip_input.c optional inet netinet/ip_ipsec.c optional ipsec netinet/ip_ipsec.c optional fast_ipsec netinet/ip_mroute.c optional mrouting netinet/ip_options.c optional inet netinet/ip_output.c optional inet netinet/raw_ip.c optional inet netinet/tcp_debug.c optional tcpdebug netinet/tcp_hostcache.c optional inet netinet/tcp_input.c optional inet netinet/tcp_output.c optional inet netinet/tcp_sack.c optional inet netinet/tcp_subr.c optional inet netinet/tcp_syncache.c optional inet netinet/tcp_timer.c optional inet netinet/tcp_usrreq.c optional inet netinet/udp_usrreq.c optional inet netinet/libalias/alias.c optional libalias netinet/libalias/alias_db.c optional libalias netinet/libalias/alias_mod.c optional libalias netinet/libalias/alias_old.c optional libalias netinet/libalias/alias_proxy.c optional libalias netinet/libalias/alias_util.c optional libalias netinet6/ah_aesxcbcmac.c optional ipsec netinet6/ah_core.c optional ipsec netinet6/ah_input.c optional ipsec netinet6/ah_output.c optional ipsec netinet6/dest6.c optional inet6 netinet6/esp_aesctr.c optional ipsec ipsec_esp netinet6/esp_core.c optional ipsec ipsec_esp netinet6/esp_input.c optional ipsec ipsec_esp netinet6/esp_output.c optional ipsec ipsec_esp netinet6/esp_rijndael.c optional ipsec ipsec_esp netinet6/frag6.c optional inet6 netinet6/icmp6.c optional inet6 netinet6/in6.c optional inet6 netinet6/in6_cksum.c optional inet6 netinet6/in6_gif.c optional gif inet6 netinet6/in6_ifattach.c optional inet6 netinet6/in6_pcb.c optional inet6 netinet6/in6_proto.c optional inet6 netinet6/in6_rmx.c optional inet6 netinet6/in6_src.c optional inet6 netinet6/ip6_forward.c optional inet6 netinet6/ip6_id.c optional inet6 netinet6/ip6_input.c optional inet6 netinet6/ip6_mroute.c optional inet6 netinet6/ip6_output.c optional inet6 netinet6/ipcomp_core.c optional ipsec netinet6/ipcomp_input.c optional ipsec netinet6/ipcomp_output.c optional ipsec netinet6/ipsec.c optional ipsec netinet6/mld6.c optional inet6 netinet6/nd6.c optional inet6 netinet6/nd6_nbr.c optional inet6 netinet6/nd6_rtr.c optional inet6 netinet6/raw_ip6.c optional inet6 netinet6/route6.c optional inet6 netinet6/scope6.c optional inet6 netinet6/udp6_output.c optional inet6 netinet6/udp6_usrreq.c optional inet6 netipsec/ipsec.c optional fast_ipsec netipsec/ipsec_input.c optional fast_ipsec netipsec/ipsec_mbuf.c optional fast_ipsec netipsec/ipsec_output.c optional fast_ipsec netipsec/key.c optional fast_ipsec netipsec/key_debug.c optional fast_ipsec netipsec/keysock.c optional fast_ipsec netipsec/xform_ah.c optional fast_ipsec netipsec/xform_esp.c optional fast_ipsec netipsec/xform_ipcomp.c optional fast_ipsec netipsec/xform_ipip.c optional fast_ipsec netipsec/xform_tcp.c optional fast_ipsec tcp_signature netipx/ipx.c optional ipx netipx/ipx_cksum.c optional ipx netipx/ipx_input.c optional ipx netipx/ipx_ip.c optional ipx netipx/ipx_outputfl.c optional ipx netipx/ipx_pcb.c optional ipx netipx/ipx_proto.c optional ipx netipx/ipx_usrreq.c optional ipx netipx/spx_debug.c optional ipx netipx/spx_usrreq.c optional ipx netkey/key.c optional ipsec netkey/key_debug.c optional ipsec netkey/keydb.c optional ipsec netkey/keysock.c optional ipsec netnatm/natm.c optional natm netnatm/natm_pcb.c optional natm netnatm/natm_proto.c optional natm netncp/ncp_conn.c optional ncp netncp/ncp_crypt.c optional ncp netncp/ncp_login.c optional ncp netncp/ncp_mod.c optional ncp netncp/ncp_ncp.c optional ncp netncp/ncp_nls.c optional ncp netncp/ncp_rq.c optional ncp netncp/ncp_sock.c optional ncp netncp/ncp_subr.c optional ncp netsmb/smb_conn.c optional netsmb netsmb/smb_crypt.c optional netsmb netsmb/smb_dev.c optional netsmb netsmb/smb_iod.c optional netsmb netsmb/smb_rq.c optional netsmb netsmb/smb_smb.c optional netsmb netsmb/smb_subr.c optional netsmb netsmb/smb_trantcp.c optional netsmb netsmb/smb_usr.c optional netsmb nfs/nfs_common.c optional nfsclient | nfsserver nfs4client/nfs4_dev.c optional nfsclient nfs4client/nfs4_idmap.c optional nfsclient nfs4client/nfs4_socket.c optional nfsclient nfs4client/nfs4_subs.c optional nfsclient nfs4client/nfs4_vfs_subs.c optional nfsclient nfs4client/nfs4_vfsops.c optional nfsclient nfs4client/nfs4_vn_subs.c optional nfsclient nfs4client/nfs4_vnops.c optional nfsclient nfsclient/bootp_subr.c optional bootp nfsclient nfsclient/krpc_subr.c optional bootp nfsclient nfsclient/nfs_bio.c optional nfsclient nfsclient/nfs_diskless.c optional nfsclient nfs_root nfsclient/nfs_node.c optional nfsclient nfsclient/nfs_socket.c optional nfsclient nfsclient/nfs_subs.c optional nfsclient nfsclient/nfs_nfsiod.c optional nfsclient nfsclient/nfs_vfsops.c optional nfsclient nfsclient/nfs_vnops.c optional nfsclient nfsclient/nfs_lock.c optional nfsclient nfsserver/nfs_serv.c optional nfsserver nfsserver/nfs_srvsock.c optional nfsserver nfsserver/nfs_srvcache.c optional nfsserver nfsserver/nfs_srvsubs.c optional nfsserver nfsserver/nfs_syscalls.c optional nfsserver # crypto support opencrypto/cast.c optional crypto | ipsec ipsec_esp opencrypto/criov.c optional crypto opencrypto/crypto.c optional crypto opencrypto/cryptodev.c optional cryptodev opencrypto/cryptosoft.c optional crypto opencrypto/deflate.c optional crypto opencrypto/rmd160.c optional crypto | ipsec opencrypto/skipjack.c optional crypto opencrypto/xform.c optional crypto pci/agp.c optional agp pci pci/agp_if.m optional agp pci pci/alpm.c optional alpm pci pci/amdpm.c optional amdpm pci | nfpm pci pci/amdsmb.c optional amdsmb pci pci/if_mn.c optional mn pci pci/if_pcn.c optional pcn pci pci/if_rl.c optional rl pci pci/if_sf.c optional sf pci pci/if_sis.c optional sis pci pci/if_ste.c optional ste pci pci/if_tl.c optional tl pci pci/if_vr.c optional vr pci pci/if_wb.c optional wb pci pci/if_xl.c optional xl pci pci/intpm.c optional intpm pci pci/ncr.c optional ncr pci pci/nfsmb.c optional nfsmb pci pci/viapm.c optional viapm pci pci/xrpu.c optional xrpu pci posix4/ksched.c optional _kposix_priority_scheduling posix4/p1003_1b.c standard posix4/posix4_mib.c standard rpc/rpcclnt.c optional nfsclient security/audit/audit.c optional audit security/audit/audit_arg.c optional audit security/audit/audit_bsm.c optional audit security/audit/audit_bsm_klib.c optional audit security/audit/audit_bsm_token.c optional audit security/audit/audit_pipe.c optional audit security/audit/audit_syscalls.c standard security/audit/audit_trigger.c optional audit security/audit/audit_worker.c optional audit security/mac/mac_inet.c optional mac inet security/mac/mac_label.c optional mac security/mac/mac_net.c optional mac security/mac/mac_pipe.c optional mac security/mac/mac_posix_sem.c optional mac security/mac/mac_process.c optional mac security/mac/mac_socket.c optional mac security/mac/mac_system.c optional mac security/mac/mac_sysv_msg.c optional mac security/mac/mac_sysv_sem.c optional mac security/mac/mac_sysv_shm.c optional mac security/mac/mac_vfs.c optional mac security/mac_biba/mac_biba.c optional mac_biba security/mac_bsdextended/mac_bsdextended.c optional mac_bsdextended security/mac_ifoff/mac_ifoff.c optional mac_ifoff security/mac_lomac/mac_lomac.c optional mac_lomac security/mac_mls/mac_mls.c optional mac_mls security/mac_none/mac_none.c optional mac_none security/mac_partition/mac_partition.c optional mac_partition security/mac_portacl/mac_portacl.c optional mac_portacl security/mac_seeotheruids/mac_seeotheruids.c optional mac_seeotheruids security/mac_stub/mac_stub.c optional mac_stub security/mac_test/mac_test.c optional mac_test ufs/ffs/ffs_alloc.c optional ffs ufs/ffs/ffs_balloc.c optional ffs ufs/ffs/ffs_inode.c optional ffs ufs/ffs/ffs_snapshot.c optional ffs ufs/ffs/ffs_softdep.c optional ffs ufs/ffs/ffs_subr.c optional ffs ufs/ffs/ffs_tables.c optional ffs ufs/ffs/ffs_vfsops.c optional ffs ufs/ffs/ffs_vnops.c optional ffs ufs/ffs/ffs_rawread.c optional directio ufs/ufs/ufs_acl.c optional ffs ufs/ufs/ufs_bmap.c optional ffs ufs/ufs/ufs_dirhash.c optional ffs ufs/ufs/ufs_extattr.c optional ffs ufs/ufs/ufs_inode.c optional ffs ufs/ufs/ufs_lookup.c optional ffs ufs/ufs/ufs_quota.c optional ffs ufs/ufs/ufs_vfsops.c optional ffs ufs/ufs/ufs_vnops.c optional ffs vm/default_pager.c standard vm/device_pager.c standard vm/phys_pager.c standard vm/redzone.c optional DEBUG_REDZONE vm/swap_pager.c standard vm/uma_core.c standard vm/uma_dbg.c standard vm/vm_contig.c standard vm/memguard.c optional DEBUG_MEMGUARD vm/vm_fault.c standard vm/vm_glue.c standard vm/vm_init.c standard vm/vm_kern.c standard vm/vm_map.c standard vm/vm_meter.c standard vm/vm_mmap.c standard vm/vm_object.c standard vm/vm_page.c standard vm/vm_pageout.c standard vm/vm_pageq.c standard vm/vm_pager.c standard vm/vm_unix.c standard vm/vm_zeroidle.c standard vm/vnode_pager.c standard # gnu/fs/xfs/xfs_alloc.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" \ warning "kernel contains GPL contaminated xfs filesystem" gnu/fs/xfs/xfs_alloc_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bit.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bmap.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bmap_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_buf_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_da_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_block.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_data.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_node.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_sf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_trace.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_error.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_extfree_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_fsops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_ialloc.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_ialloc_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_inode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_inode_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iocore.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_itable.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dfrag.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_log.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_log_recover.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_mount.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_rename.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_ail.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_buf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_extfree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_inode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_utils.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_vfsops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_vnodeops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_rw.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_attr_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_attr.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dmops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_qmops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iget.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_freebsd_iget.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_mountops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vnops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_frw.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_buf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_globals.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_dmistubs.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_super.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_stats.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vfs.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vnode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_sysctl.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_fs_subr.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_ioctl.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/debug.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/ktrace.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/mrlock.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/uuid.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/kmem.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iomap.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_behavior.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" Index: head/sys/conf/files.amd64 =================================================================== --- head/sys/conf/files.amd64 (revision 163629) +++ head/sys/conf/files.amd64 (revision 163630) @@ -1,269 +1,268 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # # linux32_genassym.o optional compat_linux32 \ dependency "$S/amd64/linux32/linux32_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "linux32_genassym.o" # linux32_assym.h optional compat_linux32 \ dependency "$S/kern/genassym.sh linux32_genassym.o" \ compile-with "sh $S/kern/genassym.sh linux32_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "linux32_assym.h" # ia32_genassym.o standard \ dependency "$S/compat/ia32/ia32_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "ia32_genassym.o" # ia32_assym.h standard \ dependency "$S/kern/genassym.sh ia32_genassym.o" \ compile-with "env NM='${NM}' sh $S/kern/genassym.sh ia32_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "ia32_assym.h" # font.h optional sc_dflt_font \ compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \ no-obj no-implicit-rule before-depend \ clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8" # atkbdmap.h optional atkbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "atkbdmap.h" # ukbdmap.h optional ukbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" # hal.o optional ath_hal \ dependency "$S/contrib/dev/ath/public/x86_64-elf.hal.o.uu" \ compile-with "uudecode < $S/contrib/dev/ath/public/x86_64-elf.hal.o.uu" \ no-implicit-rule opt_ah.h optional ath_hal \ dependency "$S/contrib/dev/ath/public/x86_64-elf.opt_ah.h" \ compile-with "cp $S/contrib/dev/ath/public/x86_64-elf.opt_ah.h opt_ah.h" \ no-obj no-implicit-rule before-depend \ clean "opt_ah.h" # nvenetlib.o optional nve pci \ dependency "$S/contrib/dev/nve/amd64/nvenetlib.o.bz2.uu" \ compile-with "uudecode $S/contrib/dev/nve/amd64/nvenetlib.o.bz2.uu ; bzip2 -df nvenetlib.o.bz2" \ no-implicit-rule # os+%DIKED-nve.h optional nve pci \ dependency "$S/contrib/dev/nve/os.h" \ compile-with "sed -e 's/^.*#include.*phy\.h.*$$//' $S/contrib/dev/nve/os.h > os+%DIKED-nve.h" \ no-implicit-rule no-obj before-depend \ clean "os+%DIKED-nve.h" # hptmvraid.o optional hptmv \ dependency "$S/dev/hptmv/amd64-elf.raid.o.uu" \ compile-with "uudecode < $S/dev/hptmv/amd64-elf.raid.o.uu" \ no-implicit-rule rr232x_lib.o optional rr232x \ dependency "$S/dev/rr232x/amd64-elf.rr232x_lib.o.uu" \ compile-with "uudecode < $S/dev/rr232x/amd64-elf.rr232x_lib.o.uu" \ no-implicit-rule # amd64/acpica/OsdEnvironment.c optional acpi amd64/acpica/acpi_machdep.c optional acpi amd64/acpica/acpi_wakeup.c optional acpi amd64/acpica/madt.c optional acpi amd64/amd64/amd64_mem.c optional mem #amd64/amd64/apic_vector.S standard amd64/amd64/atomic.c standard amd64/amd64/autoconf.c standard amd64/amd64/bios.c standard amd64/amd64/bpf_jit_machdep.c optional bpf_jitter amd64/amd64/busdma_machdep.c standard amd64/amd64/cpu_switch.S standard amd64/amd64/db_disasm.c optional ddb amd64/amd64/db_interface.c optional ddb amd64/amd64/db_trace.c optional ddb amd64/amd64/dump_machdep.c standard amd64/amd64/elf_machdep.c standard amd64/amd64/exception.S standard amd64/amd64/fpu.c standard amd64/amd64/gdb_machdep.c optional gdb amd64/amd64/identcpu.c standard amd64/amd64/in_cksum.c optional inet amd64/amd64/initcpu.c standard amd64/amd64/intr_machdep.c standard amd64/amd64/io.c optional io amd64/amd64/io_apic.c standard amd64/amd64/legacy.c standard amd64/amd64/local_apic.c standard amd64/amd64/locore.S standard no-obj amd64/amd64/machdep.c standard amd64/amd64/mem.c optional mem amd64/amd64/minidump_machdep.c standard amd64/amd64/mp_machdep.c optional smp amd64/amd64/mp_watchdog.c optional mp_watchdog smp amd64/amd64/mpboot.S optional smp amd64/amd64/mptable.c optional mptable amd64/amd64/mptable_pci.c optional mptable pci amd64/amd64/nexus.c standard amd64/amd64/pmap.c standard amd64/amd64/prof_machdep.c optional profiling-routine amd64/amd64/sigtramp.S standard amd64/amd64/support.S standard amd64/amd64/sys_machdep.c standard amd64/amd64/trap.c standard amd64/amd64/tsc.c standard amd64/amd64/uio_machdep.c standard amd64/amd64/uma_machdep.c standard amd64/amd64/vm_machdep.c standard amd64/isa/atpic.c optional atpic isa #amd64/isa/atpic_vector.S optional atpic isa amd64/isa/clock.c standard amd64/isa/elcr.c standard amd64/isa/isa.c standard amd64/isa/isa_dma.c standard amd64/isa/nmi.c standard amd64/pci/pci_bus.c optional pci amd64/pci/pci_cfgreg.c optional pci crypto/blowfish/bf_enc.c optional crypto | ipsec ipsec_esp crypto/des/des_enc.c optional crypto | ipsec ipsec_esp | \ netsmb dev/acpica/acpi_if.m standard dev/arcmsr/arcmsr.c optional arcmsr pci dev/atkbdc/atkbd.c optional atkbd atkbdc dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc dev/atkbdc/atkbdc.c optional atkbdc dev/atkbdc/atkbdc_isa.c optional atkbdc isa dev/atkbdc/atkbdc_subr.c optional atkbdc dev/atkbdc/psm.c optional psm atkbdc # There are no systems with isa slots, so all ed isa entries should go.. dev/ed/if_ed_3c503.c optional ed isa ed_3c503 dev/ed/if_ed_isa.c optional ed isa dev/ed/if_ed_wd80x3.c optional ed isa dev/ed/if_ed_hpp.c optional ed isa ed_hpp dev/ed/if_ed_sic.c optional ed isa ed_sic dev/fb/fb.c optional fb | vga -dev/fb/splash.c optional splash dev/fb/vga.c optional vga dev/ichwd/ichwd.c optional ichwd dev/if_ndis/if_ndis.c optional ndis dev/if_ndis/if_ndis_pccard.c optional ndis pccard dev/if_ndis/if_ndis_pci.c optional ndis cardbus | ndis pci dev/if_ndis/if_ndis_usb.c optional ndis usb dev/io/iodev.c optional io dev/ipmi/ipmi.c optional ipmi dev/ipmi/ipmi_acpi.c optional ipmi acpi dev/ipmi/ipmi_isa.c optional ipmi isa dev/ipmi/ipmi_kcs.c optional ipmi dev/ipmi/ipmi_smic.c optional ipmi dev/ipmi/ipmi_smbus.c optional ipmi smbus dev/ipmi/ipmi_smbios.c optional ipmi dev/ipmi/ipmi_ssif.c optional ipmi smbus dev/ipmi/ipmi_pci.c optional ipmi pci dev/fdc/fdc.c optional fdc dev/fdc/fdc_acpi.c optional fdc dev/fdc/fdc_isa.c optional fdc isa dev/fdc/fdc_pccard.c optional fdc pccard dev/hptmv/entry.c optional hptmv dev/hptmv/mv.c optional hptmv dev/hptmv/gui_lib.c optional hptmv dev/hptmv/hptproc.c optional hptmv dev/hptmv/ioctl.c optional hptmv dev/hwpmc/hwpmc_amd.c optional hwpmc dev/hwpmc/hwpmc_piv.c optional hwpmc dev/hwpmc/hwpmc_x86.c optional hwpmc dev/kbd/kbd.c optional atkbd | sc | ukbd dev/mem/memutil.c optional mem dev/nfe/if_nfe.c optional nfe pci dev/nve/if_nve.c optional nve pci dev/rr232x/os_bsd.c optional rr232x dev/rr232x/osm_bsd.c optional rr232x dev/rr232x/rr232x_config.c optional rr232x dev/sio/sio.c optional sio dev/sio/sio_isa.c optional sio isa dev/sio/sio_pccard.c optional sio pccard dev/sio/sio_pci.c optional sio pci dev/sio/sio_puc.c optional sio puc dev/speaker/spkr.c optional speaker dev/syscons/apm/apm_saver.c optional apm_saver apm dev/syscons/scterm-sc.c optional sc dev/syscons/scvgarndr.c optional sc vga dev/syscons/scvtb.c optional sc dev/uart/uart_cpu_amd64.c optional uart geom/geom_bsd.c standard geom/geom_bsd_enc.c standard geom/geom_mbr.c standard geom/geom_mbr_enc.c standard isa/syscons_isa.c optional sc isa/vga_isa.c optional vga kern/link_elf_obj.c standard pci/agp_amd64.c optional agp pci/agp_i810.c optional agp pci/agp_intel.c optional agp # # IA32 binary support # #amd64/ia32/ia32_exception.S optional compat_ia32 amd64/ia32/ia32_reg.c optional compat_ia32 amd64/ia32/ia32_signal.c optional compat_ia32 amd64/ia32/ia32_sigtramp.S optional compat_ia32 amd64/ia32/ia32_syscall.c optional compat_ia32 compat/freebsd32/freebsd32_misc.c optional compat_ia32 compat/freebsd32/freebsd32_syscalls.c optional compat_ia32 compat/freebsd32/freebsd32_sysent.c optional compat_ia32 compat/ia32/ia32_sysvec.c optional compat_ia32 compat/linprocfs/linprocfs.c optional linprocfs compat/linsysfs/linsysfs.c optional linsysfs kern/imgact_elf32.c optional compat_ia32 # # Linux/i386 binary support # amd64/linux32/linux32_dummy.c optional compat_linux32 amd64/linux32/linux32_locore.s optional compat_linux32 \ dependency "linux32_assym.h" amd64/linux32/linux32_machdep.c optional compat_linux32 amd64/linux32/linux32_sysent.c optional compat_linux32 amd64/linux32/linux32_sysvec.c optional compat_linux32 compat/linux/linux_aio.c optional compat_linux32 compat/linux/linux_emul.c optional compat_linux32 compat/linux/linux_file.c optional compat_linux32 compat/linux/linux_futex.c optional compat_linux32 compat/linux/linux_getcwd.c optional compat_linux32 compat/linux/linux_ioctl.c optional compat_linux32 compat/linux/linux_ipc.c optional compat_linux32 compat/linux/linux_mib.c optional compat_linux32 compat/linux/linux_misc.c optional compat_linux32 compat/linux/linux_signal.c optional compat_linux32 compat/linux/linux_socket.c optional compat_linux32 compat/linux/linux_stats.c optional compat_linux32 compat/linux/linux_sysctl.c optional compat_linux32 compat/linux/linux_time.c optional compat_linux32 compat/linux/linux_uid16.c optional compat_linux32 compat/linux/linux_util.c optional compat_linux32 dev/amr/amr_linux.c optional compat_linux32 amr dev/mfi/mfi_linux.c optional compat_linux32 mfi # # Windows NDIS driver support # compat/ndis/kern_ndis.c optional ndisapi pci compat/ndis/kern_windrv.c optional ndisapi pci compat/ndis/subr_hal.c optional ndisapi pci compat/ndis/subr_ndis.c optional ndisapi pci compat/ndis/subr_ntoskrnl.c optional ndisapi pci compat/ndis/subr_pe.c optional ndisapi pci compat/ndis/subr_usbd.c optional ndisapi pci compat/ndis/winx64_wrap.S optional ndisapi pci i386/bios/smbios.c optional smbios i386/bios/vpd.c optional vpd i386/cpufreq/powernow.c optional cpufreq i386/cpufreq/est.c optional cpufreq i386/cpufreq/p4tcc.c optional cpufreq Index: head/sys/conf/files.i386 =================================================================== --- head/sys/conf/files.i386 (revision 163629) +++ head/sys/conf/files.i386 (revision 163630) @@ -1,460 +1,459 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # linux_genassym.o optional compat_linux \ dependency "$S/i386/linux/linux_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "linux_genassym.o" # linux_assym.h optional compat_linux \ dependency "$S/kern/genassym.sh linux_genassym.o" \ compile-with "sh $S/kern/genassym.sh linux_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "linux_assym.h" # svr4_genassym.o optional compat_svr4 \ dependency "$S/i386/svr4/svr4_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "svr4_genassym.o" # svr4_assym.h optional compat_svr4 \ dependency "$S/kern/genassym.sh svr4_genassym.o" \ compile-with "sh $S/kern/genassym.sh svr4_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "svr4_assym.h" # font.h optional sc_dflt_font \ compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \ no-obj no-implicit-rule before-depend \ clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8" # atkbdmap.h optional atkbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "atkbdmap.h" # ukbdmap.h optional ukbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" # trlld.o optional oltr \ dependency "$S/contrib/dev/oltr/i386-elf.trlld.o.uu" \ compile-with "uudecode < $S/contrib/dev/oltr/i386-elf.trlld.o.uu" \ no-implicit-rule # hal.o optional ath_hal \ dependency "$S/contrib/dev/ath/public/i386-elf.hal.o.uu" \ compile-with "uudecode < $S/contrib/dev/ath/public/i386-elf.hal.o.uu" \ no-implicit-rule opt_ah.h optional ath_hal \ dependency "$S/contrib/dev/ath/public/i386-elf.opt_ah.h" \ compile-with "cp $S/contrib/dev/ath/public/i386-elf.opt_ah.h opt_ah.h" \ no-obj no-implicit-rule before-depend \ clean "opt_ah.h" # nvenetlib.o optional nve pci \ dependency "$S/contrib/dev/nve/i386/nvenetlib.o.bz2.uu" \ compile-with "uudecode $S/contrib/dev/nve/i386/nvenetlib.o.bz2.uu ; bzip2 -df nvenetlib.o.bz2" \ no-implicit-rule # os+%DIKED-nve.h optional nve pci \ dependency "$S/contrib/dev/nve/os.h" \ compile-with "sed -e 's/^.*#include.*phy\.h.*$$//' $S/contrib/dev/nve/os.h > os+%DIKED-nve.h" \ no-implicit-rule no-obj before-depend \ clean "os+%DIKED-nve.h" # hptmvraid.o optional hptmv \ dependency "$S/dev/hptmv/i386-elf.raid.o.uu" \ compile-with "uudecode < $S/dev/hptmv/i386-elf.raid.o.uu" \ no-implicit-rule # rr232x_lib.o optional rr232x \ dependency "$S/dev/rr232x/i386-elf.rr232x_lib.o.uu" \ compile-with "uudecode < $S/dev/rr232x/i386-elf.rr232x_lib.o.uu" \ no-implicit-rule # # compat/linprocfs/linprocfs.c optional linprocfs compat/linsysfs/linsysfs.c optional linsysfs compat/linux/linux_aio.c optional compat_linux compat/linux/linux_emul.c optional compat_linux compat/linux/linux_file.c optional compat_linux compat/linux/linux_futex.c optional compat_linux compat/linux/linux_getcwd.c optional compat_linux compat/linux/linux_ioctl.c optional compat_linux compat/linux/linux_ipc.c optional compat_linux compat/linux/linux_mib.c optional compat_linux compat/linux/linux_misc.c optional compat_linux compat/linux/linux_signal.c optional compat_linux compat/linux/linux_socket.c optional compat_linux compat/linux/linux_stats.c optional compat_linux compat/linux/linux_sysctl.c optional compat_linux compat/linux/linux_time.c optional compat_linux compat/linux/linux_uid16.c optional compat_linux compat/linux/linux_util.c optional compat_linux compat/ndis/kern_ndis.c optional ndisapi pci compat/ndis/kern_windrv.c optional ndisapi pci compat/ndis/subr_hal.c optional ndisapi pci compat/ndis/subr_ndis.c optional ndisapi pci compat/ndis/subr_ntoskrnl.c optional ndisapi pci compat/ndis/subr_pe.c optional ndisapi pci compat/ndis/subr_usbd.c optional ndisapi pci compat/ndis/winx32_wrap.S optional ndisapi pci compat/pecoff/imgact_pecoff.c optional pecoff_support compat/svr4/imgact_svr4.c optional compat_svr4 compat/svr4/svr4_fcntl.c optional compat_svr4 compat/svr4/svr4_filio.c optional compat_svr4 compat/svr4/svr4_ioctl.c optional compat_svr4 compat/svr4/svr4_ipc.c optional compat_svr4 compat/svr4/svr4_misc.c optional compat_svr4 compat/svr4/svr4_resource.c optional compat_svr4 compat/svr4/svr4_signal.c optional compat_svr4 compat/svr4/svr4_socket.c optional compat_svr4 compat/svr4/svr4_sockio.c optional compat_svr4 compat/svr4/svr4_stat.c optional compat_svr4 compat/svr4/svr4_stream.c optional compat_svr4 compat/svr4/svr4_syscallnames.c optional compat_svr4 compat/svr4/svr4_sysent.c optional compat_svr4 compat/svr4/svr4_sysvec.c optional compat_svr4 compat/svr4/svr4_termios.c optional compat_svr4 compat/svr4/svr4_ttold.c optional compat_svr4 contrib/dev/oltr/if_oltr.c optional oltr contrib/dev/oltr/if_oltr_isa.c optional oltr isa contrib/dev/oltr/if_oltr_pci.c optional oltr pci contrib/dev/oltr/trlldbm.c optional oltr contrib/dev/oltr/trlldhm.c optional oltr contrib/dev/oltr/trlldmac.c optional oltr bf_enc.o optional crypto | ipsec ipsec_esp \ dependency "$S/crypto/blowfish/arch/i386/bf_enc.S $S/crypto/blowfish/arch/i386/bf_enc_586.S $S/crypto/blowfish/arch/i386/bf_enc_686.S" \ compile-with "${CC} -c -I$S/crypto/blowfish/arch/i386 ${ASM_CFLAGS} ${WERROR} ${.IMPSRC}" \ no-implicit-rule crypto/des/arch/i386/des_enc.S optional crypto | ipsec ipsec_esp | netsmb crypto/via/padlock.c optional padlock crypto/via/padlock_cipher.c optional padlock crypto/via/padlock_hash.c optional padlock dev/advansys/adv_isa.c optional adv isa dev/aic/aic_isa.c optional aic isa dev/arcmsr/arcmsr.c optional arcmsr pci dev/ar/if_ar.c optional ar dev/ar/if_ar_isa.c optional ar isa dev/ar/if_ar_pci.c optional ar pci dev/arl/if_arl.c optional arl dev/arl/if_arl_isa.c optional arl isa dev/atkbdc/atkbd.c optional atkbd atkbdc dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc dev/atkbdc/atkbdc.c optional atkbdc dev/atkbdc/atkbdc_isa.c optional atkbdc isa dev/atkbdc/atkbdc_subr.c optional atkbdc dev/atkbdc/psm.c optional psm atkbdc dev/ce/ceddk.c optional ce dev/ce/if_ce.c optional ce dev/ce/tau32-ddk.c optional ce dev/cm/if_cm_isa.c optional cm isa dev/cp/cpddk.c optional cp dev/cp/if_cp.c optional cp dev/ctau/ctau.c optional ctau dev/ctau/ctddk.c optional ctau dev/ctau/if_ct.c optional ctau dev/cx/csigma.c optional cx dev/cx/cxddk.c optional cx dev/cx/if_cx.c optional cx dev/ed/if_ed_3c503.c optional ed isa ed_3c503 dev/ed/if_ed_isa.c optional ed isa dev/ed/if_ed_wd80x3.c optional ed isa dev/ed/if_ed_hpp.c optional ed isa ed_hpp dev/ed/if_ed_sic.c optional ed isa ed_sic dev/fb/fb.c optional fb | vga -dev/fb/splash.c optional splash dev/fb/vga.c optional vga dev/fdc/fdc.c optional fdc dev/fdc/fdc_acpi.c optional fdc dev/fdc/fdc_isa.c optional fdc isa dev/fdc/fdc_pccard.c optional fdc pccard dev/fe/if_fe_isa.c optional fe isa dev/hptmv/entry.c optional hptmv dev/hptmv/mv.c optional hptmv dev/hptmv/gui_lib.c optional hptmv dev/hptmv/hptproc.c optional hptmv dev/hptmv/ioctl.c optional hptmv dev/hwpmc/hwpmc_amd.c optional hwpmc dev/hwpmc/hwpmc_pentium.c optional hwpmc dev/hwpmc/hwpmc_piv.c optional hwpmc dev/hwpmc/hwpmc_ppro.c optional hwpmc dev/hwpmc/hwpmc_x86.c optional hwpmc dev/ichwd/ichwd.c optional ichwd dev/if_ndis/if_ndis.c optional ndis dev/if_ndis/if_ndis_pccard.c optional ndis pccard dev/if_ndis/if_ndis_pci.c optional ndis cardbus | ndis pci dev/if_ndis/if_ndis_usb.c optional ndis usb dev/io/iodev.c optional io dev/ipmi/ipmi.c optional ipmi dev/ipmi/ipmi_acpi.c optional ipmi acpi dev/ipmi/ipmi_isa.c optional ipmi isa dev/ipmi/ipmi_kcs.c optional ipmi dev/ipmi/ipmi_smic.c optional ipmi dev/ipmi/ipmi_smbus.c optional ipmi smbus dev/ipmi/ipmi_smbios.c optional ipmi dev/ipmi/ipmi_ssif.c optional ipmi smbus dev/ipmi/ipmi_pci.c optional ipmi pci dev/kbd/kbd.c optional atkbd | sc | ukbd | vt dev/le/if_le_isa.c optional le isa dev/mem/memutil.c optional mem dev/mse/mse.c optional mse dev/mse/mse_isa.c optional mse isa dev/nfe/if_nfe.c optional nfe pci dev/nve/if_nve.c optional nve pci dev/pcf/pcf_isa.c optional pcf dev/random/nehemiah.c optional random dev/rr232x/os_bsd.c optional rr232x dev/rr232x/osm_bsd.c optional rr232x dev/rr232x/rr232x_config.c optional rr232x dev/sbni/if_sbni.c optional sbni dev/sbni/if_sbni_isa.c optional sbni isa dev/sbni/if_sbni_pci.c optional sbni pci dev/sio/sio.c optional sio dev/sio/sio_isa.c optional sio isa dev/sio/sio_pccard.c optional sio pccard dev/sio/sio_pci.c optional sio pci dev/sio/sio_puc.c optional sio puc dev/speaker/spkr.c optional speaker dev/sr/if_sr_isa.c optional sr isa dev/syscons/apm/apm_saver.c optional apm_saver apm dev/syscons/scterm-sc.c optional sc dev/syscons/scvesactl.c optional sc vga vesa dev/syscons/scvgarndr.c optional sc vga dev/syscons/scvtb.c optional sc dev/uart/uart_cpu_i386.c optional uart geom/geom_bsd.c standard geom/geom_bsd_enc.c standard geom/geom_mbr.c standard geom/geom_mbr_enc.c standard dev/acpica/acpi_if.m standard i386/acpica/OsdEnvironment.c optional acpi i386/acpica/acpi_machdep.c optional acpi i386/acpica/acpi_wakeup.c optional acpi acpi_wakecode.h optional acpi \ dependency "$S/i386/acpica/acpi_wakecode.S assym.s" \ compile-with "${MAKE} -f $S/i386/acpica/Makefile MAKESRCPATH=$S/i386/acpica" \ no-obj no-implicit-rule before-depend \ clean "acpi_wakecode.h acpi_wakecode.o acpi_wakecode.bin" # i386/acpica/madt.c optional acpi apic i386/bios/apm.c optional apm i386/bios/mca_machdep.c optional mca i386/bios/smapi.c optional smapi i386/bios/smapi_bios.S optional smapi i386/bios/smbios.c optional smbios i386/bios/vpd.c optional vpd i386/cpufreq/est.c optional cpufreq i386/cpufreq/p4tcc.c optional cpufreq i386/cpufreq/powernow.c optional cpufreq i386/cpufreq/smist.c optional cpufreq #i386/i386/apic_vector.s optional apic i386/i386/atomic.c standard \ compile-with "${CC} -c ${CFLAGS} ${DEFINED_PROF:S/^$/-fomit-frame-pointer/} ${.IMPSRC}" i386/i386/autoconf.c standard i386/i386/bios.c standard i386/i386/bioscall.s standard i386/i386/bpf_jit_machdep.c optional bpf_jitter i386/i386/busdma_machdep.c standard i386/i386/db_disasm.c optional ddb i386/i386/db_interface.c optional ddb i386/i386/db_trace.c optional ddb i386/i386/dump_machdep.c standard i386/i386/elan-mmcr.c optional cpu_elan | cpu_soekris i386/i386/elf_machdep.c standard i386/i386/exception.s standard i386/i386/gdb_machdep.c optional gdb i386/i386/geode.c optional cpu_geode i386/i386/i686_mem.c optional mem i386/i386/identcpu.c standard i386/i386/in_cksum.c optional inet i386/i386/initcpu.c standard i386/i386/intr_machdep.c standard i386/i386/io.c optional io i386/i386/io_apic.c optional apic i386/i386/k6_mem.c optional mem i386/i386/legacy.c standard i386/i386/local_apic.c optional apic i386/i386/locore.s standard no-obj i386/i386/longrun.c optional cpu_enable_longrun i386/i386/machdep.c standard i386/i386/mem.c optional mem i386/i386/minidump_machdep.c standard i386/i386/mp_clock.c optional smp i386/i386/mp_machdep.c optional smp i386/i386/mp_watchdog.c optional mp_watchdog smp i386/i386/mpboot.s optional smp i386/i386/mptable.c optional apic i386/i386/mptable_pci.c optional apic pci i386/i386/nexus.c standard i386/i386/perfmon.c optional perfmon i386/i386/pmap.c standard i386/i386/ptrace_machdep.c standard i386/i386/support.s standard i386/i386/swtch.s standard i386/i386/sys_machdep.c standard i386/i386/trap.c standard i386/i386/tsc.c standard i386/i386/uio_machdep.c standard i386/i386/vm86.c standard i386/i386/vm_machdep.c standard i386/ibcs2/ibcs2_errno.c optional ibcs2 i386/ibcs2/ibcs2_fcntl.c optional ibcs2 i386/ibcs2/ibcs2_ioctl.c optional ibcs2 i386/ibcs2/ibcs2_ipc.c optional ibcs2 i386/ibcs2/ibcs2_isc.c optional ibcs2 i386/ibcs2/ibcs2_isc_sysent.c optional ibcs2 i386/ibcs2/ibcs2_misc.c optional ibcs2 i386/ibcs2/ibcs2_msg.c optional ibcs2 i386/ibcs2/ibcs2_other.c optional ibcs2 i386/ibcs2/ibcs2_signal.c optional ibcs2 i386/ibcs2/ibcs2_socksys.c optional ibcs2 i386/ibcs2/ibcs2_stat.c optional ibcs2 i386/ibcs2/ibcs2_sysent.c optional ibcs2 i386/ibcs2/ibcs2_sysi86.c optional ibcs2 i386/ibcs2/ibcs2_sysvec.c optional ibcs2 i386/ibcs2/ibcs2_util.c optional ibcs2 i386/ibcs2/ibcs2_xenix.c optional ibcs2 i386/ibcs2/ibcs2_xenix_sysent.c optional ibcs2 i386/ibcs2/imgact_coff.c optional ibcs2 i386/isa/atpic.c standard #i386/isa/atpic_vector.s standard i386/isa/clock.c standard i386/isa/elcr.c standard i386/isa/elink.c optional ep | ie i386/isa/isa.c optional isa i386/isa/isa_dma.c optional isa i386/isa/nmi.c standard i386/isa/npx.c optional npx i386/isa/pmtimer.c optional pmtimer i386/isa/prof_machdep.c optional profiling-routine i386/isa/spic.c optional spic i386/isa/vesa.c optional vga vesa i386/linux/imgact_linux.c optional compat_linux i386/linux/linux_dummy.c optional compat_linux i386/linux/linux_locore.s optional compat_linux \ dependency "linux_assym.h" i386/linux/linux_machdep.c optional compat_linux i386/linux/linux_ptrace.c optional compat_linux i386/linux/linux_sysent.c optional compat_linux i386/linux/linux_sysvec.c optional compat_linux i386/pci/pci_bus.c optional pci i386/pci/pci_cfgreg.c optional pci i386/pci/pci_pir.c optional pci i386/svr4/svr4_locore.s optional compat_svr4 \ dependency "svr4_assym.h" \ warning "COMPAT_SVR4 is broken and should be avoided" i386/svr4/svr4_machdep.c optional compat_svr4 # # isdn4bsd, needed for isic | iwic | ifpi | ifpi2 | ihfc | ifpnp | itjc # i4b/layer1/i4b_hdlc.c optional ihfc | itjc i4b/layer1/i4b_l1dmux.c optional ifpi | ifpi2 | ifpnp | \ ihfc | isic | itjc | iwic i4b/layer1/i4b_l1lib.c optional ifpi | ifpi2 | ifpnp | \ ihfc | isic | itjc | iwic # # isdn4bsd, isic # i4b/layer1/isic/i4b_asuscom_ipac.c optional isic i4b/layer1/isic/i4b_avm_a1.c optional isic i4b/layer1/isic/i4b_bchan.c optional isic i4b/layer1/isic/i4b_ctx_s0P.c optional isic i4b/layer1/isic/i4b_drn_ngo.c optional isic i4b/layer1/isic/i4b_dynalink.c optional isic i4b/layer1/isic/i4b_elsa_qs1i.c optional isic i4b/layer1/isic/i4b_elsa_qs1p.c optional isic pci i4b/layer1/isic/i4b_elsa_pcc16.c optional isic i4b/layer1/isic/i4b_hscx.c optional isic i4b/layer1/isic/i4b_isac.c optional isic i4b/layer1/isic/i4b_isic.c optional isic i4b/layer1/isic/i4b_isic_isa.c optional isic i4b/layer1/isic/i4b_isic_pnp.c optional isic i4b/layer1/isic/i4b_itk_ix1.c optional isic i4b/layer1/isic/i4b_l1.c optional isic i4b/layer1/isic/i4b_l1fsm.c optional isic i4b/layer1/isic/i4b_siemens_isurf.c optional isic i4b/layer1/isic/i4b_sws.c optional isic i4b/layer1/isic/i4b_tel_s016.c optional isic i4b/layer1/isic/i4b_tel_s0163.c optional isic i4b/layer1/isic/i4b_tel_s08.c optional isic i4b/layer1/isic/i4b_usr_sti.c optional isic i4b/layer1/isic/i4b_diva.c optional isic # # isdn4bsd, iwic # i4b/layer1/iwic/i4b_iwic_pci.c optional iwic pci i4b/layer1/iwic/i4b_iwic_dchan.c optional iwic pci i4b/layer1/iwic/i4b_iwic_bchan.c optional iwic pci i4b/layer1/iwic/i4b_iwic_fsm.c optional iwic pci i4b/layer1/iwic/i4b_iwic_l1if.c optional iwic pci # # isdn4bsd, ifpi # i4b/layer1/ifpi/i4b_ifpi_pci.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_isac.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_l1.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_l1fsm.c optional ifpi pci # # isdn4bsd, ifpi2 # i4b/layer1/ifpi2/i4b_ifpi2_pci.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_isacsx.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_l1.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_l1fsm.c optional ifpi2 pci # # isdn4bsd, ifpnp # i4b/layer1/ifpnp/i4b_ifpnp_avm.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_isac.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_l1.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_l1fsm.c optional ifpnp # # isdn4bsd, ihfc # i4b/layer1/ihfc/i4b_ihfc_l1if.c optional ihfc i4b/layer1/ihfc/i4b_ihfc_pnp.c optional ihfc i4b/layer1/ihfc/i4b_ihfc_drv.c optional ihfc # # isdn4bsd, itjc # i4b/layer1/itjc/i4b_itjc_pci.c optional itjc i4b/layer1/itjc/i4b_itjc_isac.c optional itjc i4b/layer1/itjc/i4b_itjc_l1.c optional itjc i4b/layer1/itjc/i4b_itjc_l1fsm.c optional itjc # isa/syscons_isa.c optional sc isa/vga_isa.c optional vga kern/imgact_aout.c optional compat_aout kern/imgact_gzip.c optional gzip libkern/divdi3.c standard libkern/ffsl.c standard libkern/flsl.c standard libkern/moddi3.c standard libkern/qdivrem.c standard libkern/ucmpdi2.c standard libkern/udivdi3.c standard libkern/umoddi3.c standard pci/agp_ali.c optional agp pci/agp_amd.c optional agp pci/agp_amd64.c optional agp pci/agp_ati.c optional agp pci/agp_i810.c optional agp pci/agp_intel.c optional agp pci/agp_nvidia.c optional agp pci/agp_sis.c optional agp pci/agp_via.c optional agp i386/xbox/xbox.c optional xbox i386/xbox/xboxfb.c optional xboxfb dev/fb/boot_font.c optional xboxfb i386/xbox/pic16l.s optional xbox Index: head/sys/conf/files.ia64 =================================================================== --- head/sys/conf/files.ia64 (revision 163629) +++ head/sys/conf/files.ia64 (revision 163630) @@ -1,131 +1,130 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # # font8x16.o optional std8x16font \ compile-with "uudecode < /usr/share/syscons/fonts/${STD8X16FONT}-8x16.fnt && file2c 'unsigned char font_16[16*256] = {' '};' < ${STD8X16FONT}-8x16 > font8x16.c && ${CC} -c ${CFLAGS} font8x16.c" \ no-implicit-rule before-depend \ clean "${STD8X16FONT}-8x16 font8x16.c" # atkbdmap.h optional atkbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "atkbdmap.h" # font.h optional sc_dflt_font \ compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \ no-obj no-implicit-rule before-depend \ clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8" # ukbdmap.h optional ukbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" # compat/freebsd32/freebsd32_misc.c optional compat_ia32 compat/freebsd32/freebsd32_syscalls.c optional compat_ia32 compat/freebsd32/freebsd32_sysent.c optional compat_ia32 compat/ia32/ia32_sysvec.c optional compat_ia32 contrib/ia64/libuwx/src/uwx_bstream.c standard contrib/ia64/libuwx/src/uwx_context.c standard contrib/ia64/libuwx/src/uwx_env.c standard contrib/ia64/libuwx/src/uwx_scoreboard.c standard contrib/ia64/libuwx/src/uwx_step.c standard contrib/ia64/libuwx/src/uwx_str.c standard contrib/ia64/libuwx/src/uwx_swap.c standard contrib/ia64/libuwx/src/uwx_trace.c standard contrib/ia64/libuwx/src/uwx_uinfo.c standard contrib/ia64/libuwx/src/uwx_utable.c standard crypto/blowfish/bf_enc.c optional crypto | ipsec ipsec_esp crypto/des/des_enc.c optional crypto | ipsec ipsec_esp | \ netsmb dev/advansys/adv_isa.c optional adv isa dev/aic/aic_isa.c optional aic isa dev/atkbdc/atkbd.c optional atkbd atkbdc dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc dev/atkbdc/atkbdc.c optional atkbdc dev/atkbdc/atkbdc_isa.c optional atkbdc isa dev/atkbdc/atkbdc_subr.c optional atkbdc dev/atkbdc/psm.c optional psm atkbdc dev/fb/fb.c optional fb | vga -dev/fb/splash.c optional splash dev/fb/vga.c optional vga dev/hwpmc/hwpmc_ia64.c optional hwpmc dev/kbd/kbd.c optional atkbd | sc | ukbd dev/syscons/scterm-sc.c optional sc dev/syscons/scvgarndr.c optional sc vga dev/syscons/scvtb.c optional sc dev/uart/uart_cpu_ia64.c optional uart dev/acpica/acpi_if.m standard ia64/acpica/OsdEnvironment.c optional acpi ia64/acpica/acpi_machdep.c optional acpi ia64/acpica/acpi_wakeup.c optional acpi ia64/acpica/madt.c optional acpi ia64/disasm/disasm_decode.c standard ia64/disasm/disasm_extract.c standard ia64/disasm/disasm_format.c standard ia64/ia32/ia32_reg.c optional compat_ia32 ia64/ia32/ia32_signal.c optional compat_ia32 ia64/ia32/ia32_trap.c optional compat_ia32 ia64/ia64/autoconf.c standard ia64/ia64/busdma_machdep.c standard ia64/ia64/clock.c standard ia64/ia64/context.S standard ia64/ia64/db_machdep.c optional ddb ia64/ia64/dump_machdep.c standard ia64/ia64/efi.c standard ia64/ia64/elf_machdep.c standard ia64/ia64/emulate.c standard ia64/ia64/exception.S standard ia64/ia64/gdb_machdep.c optional gdb ia64/ia64/in_cksum.c optional inet ia64/ia64/interrupt.c standard ia64/ia64/locore.S standard no-obj ia64/ia64/machdep.c standard ia64/ia64/mca.c standard ia64/ia64/mem.c optional mem ia64/ia64/mp_machdep.c optional smp ia64/ia64/nexus.c standard ia64/ia64/pal.S standard ia64/ia64/pmap.c standard ia64/ia64/ptrace_machdep.c standard ia64/ia64/sal.c standard ia64/ia64/sapic.c standard ia64/ia64/setjmp.S standard ia64/ia64/ssc.c optional ski ia64/ia64/sscdisk.c optional ski ia64/ia64/support.S standard ia64/ia64/sys_machdep.c standard ia64/ia64/syscall.S standard ia64/ia64/trap.c standard ia64/ia64/uio_machdep.c standard ia64/ia64/uma_machdep.c standard ia64/ia64/unaligned.c standard ia64/ia64/unwind.c standard ia64/ia64/vm_machdep.c standard ia64/isa/isa.c optional isa ia64/isa/isa_dma.c optional isa ia64/pci/pci_cfgreg.c optional pci isa/syscons_isa.c optional sc isa/vga_isa.c optional vga kern/imgact_elf32.c optional compat_ia32 libkern/bcmp.c standard libkern/ffsl.c standard libkern/fls.c standard libkern/flsl.c standard libkern/ia64/__divdi3.S standard libkern/ia64/__divsi3.S standard libkern/ia64/__moddi3.S standard libkern/ia64/__modsi3.S standard libkern/ia64/__udivdi3.S standard libkern/ia64/__udivsi3.S standard libkern/ia64/__umoddi3.S standard libkern/ia64/__umodsi3.S standard libkern/ia64/bswap16.S standard libkern/ia64/bswap32.S standard Index: head/sys/conf/files.pc98 =================================================================== --- head/sys/conf/files.pc98 (revision 163629) +++ head/sys/conf/files.pc98 (revision 163630) @@ -1,351 +1,350 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # modified for PC-9801/PC-9821 # # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # linux_genassym.o optional compat_linux \ dependency "$S/i386/linux/linux_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "linux_genassym.o" # linux_assym.h optional compat_linux \ dependency "$S/kern/genassym.sh linux_genassym.o" \ compile-with "sh $S/kern/genassym.sh linux_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "linux_assym.h" # svr4_genassym.o optional compat_svr4 \ dependency "$S/i386/svr4/svr4_genassym.c" \ compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \ no-obj no-implicit-rule \ clean "svr4_genassym.o" # svr4_assym.h optional compat_svr4 \ dependency "$S/kern/genassym.sh svr4_genassym.o" \ compile-with "sh $S/kern/genassym.sh svr4_genassym.o > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "svr4_assym.h" # ukbdmap.h optional ukbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" # trlld.o optional oltr \ dependency "$S/contrib/dev/oltr/i386-elf.trlld.o.uu" \ compile-with "uudecode < $S/contrib/dev/oltr/i386-elf.trlld.o.uu" \ no-implicit-rule # hal.o optional ath_hal \ dependency "$S/contrib/dev/ath/public/i386-elf.hal.o.uu" \ compile-with "uudecode < $S/contrib/dev/ath/public/i386-elf.hal.o.uu" \ no-implicit-rule opt_ah.h optional ath_hal \ dependency "$S/contrib/dev/ath/public/i386-elf.opt_ah.h" \ compile-with "cp $S/contrib/dev/ath/public/i386-elf.opt_ah.h opt_ah.h" \ no-obj no-implicit-rule before-depend \ clean "opt_ah.h" # compat/linprocfs/linprocfs.c optional linprocfs compat/linsysfs/linsysfs.c optional linsysfs compat/linux/linux_aio.c optional compat_linux compat/linux/linux_emul.c optional compat_linux compat/linux/linux_file.c optional compat_linux compat/linux/linux_futex.c optional compat_linux compat/linux/linux_getcwd.c optional compat_linux compat/linux/linux_ioctl.c optional compat_linux compat/linux/linux_ipc.c optional compat_linux compat/linux/linux_mib.c optional compat_linux compat/linux/linux_misc.c optional compat_linux compat/linux/linux_signal.c optional compat_linux compat/linux/linux_socket.c optional compat_linux compat/linux/linux_stats.c optional compat_linux compat/linux/linux_sysctl.c optional compat_linux compat/linux/linux_time.c optional compat_linux compat/linux/linux_uid16.c optional compat_linux compat/linux/linux_util.c optional compat_linux compat/pecoff/imgact_pecoff.c optional pecoff_support compat/svr4/imgact_svr4.c optional compat_svr4 compat/svr4/svr4_fcntl.c optional compat_svr4 compat/svr4/svr4_filio.c optional compat_svr4 compat/svr4/svr4_ioctl.c optional compat_svr4 compat/svr4/svr4_ipc.c optional compat_svr4 compat/svr4/svr4_misc.c optional compat_svr4 compat/svr4/svr4_resource.c optional compat_svr4 compat/svr4/svr4_signal.c optional compat_svr4 compat/svr4/svr4_socket.c optional compat_svr4 compat/svr4/svr4_sockio.c optional compat_svr4 compat/svr4/svr4_stat.c optional compat_svr4 compat/svr4/svr4_stream.c optional compat_svr4 compat/svr4/svr4_syscallnames.c optional compat_svr4 compat/svr4/svr4_sysent.c optional compat_svr4 compat/svr4/svr4_sysvec.c optional compat_svr4 compat/svr4/svr4_termios.c optional compat_svr4 compat/svr4/svr4_ttold.c optional compat_svr4 contrib/dev/oltr/if_oltr.c optional oltr contrib/dev/oltr/if_oltr_pci.c optional oltr pci contrib/dev/oltr/trlldbm.c optional oltr contrib/dev/oltr/trlldhm.c optional oltr contrib/dev/oltr/trlldmac.c optional oltr bf_enc.o optional crypto | ipsec ipsec_esp \ dependency "$S/crypto/blowfish/arch/i386/bf_enc.S $S/crypto/blowfish/arch/i386/bf_enc_586.S $S/crypto/blowfish/arch/i386/bf_enc_686.S" \ compile-with "${CC} -c -I$S/crypto/blowfish/arch/i386 ${ASM_CFLAGS} ${WERROR} ${.IMPSRC}" \ no-implicit-rule crypto/des/arch/i386/des_enc.S optional crypto | ipsec ipsec_esp | netsmb dev/aic/aic_cbus.c optional aic isa dev/ar/if_ar.c optional ar dev/ar/if_ar_pci.c optional ar pci dev/ce/ceddk.c optional ce dev/ce/if_ce.c optional ce dev/ce/tau32-ddk.c optional ce dev/cp/cpddk.c optional cp dev/cp/if_cp.c optional cp dev/ct/bshw_machdep.c optional ct dev/ct/ct.c optional ct dev/ct/ct_isa.c optional ct isa dev/ed/if_ed_cbus.c optional ed isa dev/ed/if_ed_wd80x3.c optional ed isa dev/fb/fb.c optional fb | gdc -dev/fb/splash.c optional splash dev/fe/if_fe_cbus.c optional fe isa dev/hwpmc/hwpmc_amd.c optional hwpmc dev/hwpmc/hwpmc_pentium.c optional hwpmc dev/hwpmc/hwpmc_piv.c optional hwpmc dev/hwpmc/hwpmc_ppro.c optional hwpmc dev/hwpmc/hwpmc_x86.c optional hwpmc dev/io/iodev.c optional io dev/kbd/kbd.c optional pckbd | sc | ukbd dev/le/if_le_cbus.c optional le isa dev/mem/memutil.c optional mem dev/mse/mse.c optional mse dev/mse/mse_cbus.c optional mse isa dev/sbni/if_sbni.c optional sbni dev/sbni/if_sbni_pci.c optional sbni pci dev/sio/sio_pccard.c optional sio pccard dev/sio/sio_pci.c optional sio pci dev/sio/sio_puc.c optional sio puc dev/snc/dp83932.c optional snc dev/snc/dp83932subr.c optional snc dev/snc/if_snc.c optional snc dev/snc/if_snc_cbus.c optional snc isa dev/snc/if_snc_pccard.c optional snc pccard dev/speaker/spkr.c optional speaker dev/syscons/apm/apm_saver.c optional apm_saver apm dev/uart/uart_cpu_pc98.c optional uart geom/geom_bsd.c standard geom/geom_bsd_enc.c standard geom/geom_pc98.c standard geom/geom_pc98_enc.c standard i386/bios/apm.c optional apm #i386/i386/apic_vector.s optional apic i386/i386/atomic.c standard \ compile-with "${CC} -c ${CFLAGS} ${DEFINED_PROF:S/^$/-fomit-frame-pointer/} ${.IMPSRC}" i386/i386/autoconf.c standard i386/i386/bios.c standard i386/i386/bioscall.s standard i386/i386/bpf_jit_machdep.c optional bpf_jitter i386/i386/busdma_machdep.c standard i386/i386/db_disasm.c optional ddb i386/i386/db_interface.c optional ddb i386/i386/db_trace.c optional ddb i386/i386/dump_machdep.c standard i386/i386/elf_machdep.c standard i386/i386/exception.s standard i386/i386/gdb_machdep.c optional gdb i386/i386/i686_mem.c optional mem i386/i386/identcpu.c standard i386/i386/in_cksum.c optional inet i386/i386/initcpu.c standard i386/i386/intr_machdep.c standard i386/i386/io.c optional io i386/i386/io_apic.c optional apic i386/i386/k6_mem.c optional mem i386/i386/legacy.c standard i386/i386/local_apic.c optional apic i386/i386/locore.s standard no-obj i386/i386/mem.c optional mem i386/i386/minidump_machdep.c standard i386/i386/mp_clock.c optional smp i386/i386/mp_machdep.c optional smp i386/i386/mp_watchdog.c optional mp_watchdog smp i386/i386/mpboot.s optional smp i386/i386/mptable.c optional apic i386/i386/mptable_pci.c optional apic pci i386/i386/nexus.c standard i386/i386/perfmon.c optional perfmon i386/i386/pmap.c standard i386/i386/ptrace_machdep.c standard i386/i386/support.s standard i386/i386/swtch.s standard i386/i386/sys_machdep.c standard i386/i386/trap.c standard i386/i386/tsc.c standard i386/i386/uio_machdep.c standard i386/i386/vm86.c standard i386/i386/vm_machdep.c standard i386/ibcs2/ibcs2_errno.c optional ibcs2 i386/ibcs2/ibcs2_fcntl.c optional ibcs2 i386/ibcs2/ibcs2_ioctl.c optional ibcs2 i386/ibcs2/ibcs2_ipc.c optional ibcs2 i386/ibcs2/ibcs2_isc.c optional ibcs2 i386/ibcs2/ibcs2_isc_sysent.c optional ibcs2 i386/ibcs2/ibcs2_misc.c optional ibcs2 i386/ibcs2/ibcs2_msg.c optional ibcs2 i386/ibcs2/ibcs2_other.c optional ibcs2 i386/ibcs2/ibcs2_signal.c optional ibcs2 i386/ibcs2/ibcs2_socksys.c optional ibcs2 i386/ibcs2/ibcs2_stat.c optional ibcs2 i386/ibcs2/ibcs2_sysent.c optional ibcs2 i386/ibcs2/ibcs2_sysi86.c optional ibcs2 i386/ibcs2/ibcs2_sysvec.c optional ibcs2 i386/ibcs2/ibcs2_util.c optional ibcs2 i386/ibcs2/ibcs2_xenix.c optional ibcs2 i386/ibcs2/ibcs2_xenix_sysent.c optional ibcs2 i386/ibcs2/imgact_coff.c optional ibcs2 i386/isa/atpic.c standard #i386/isa/atpic_vector.s standard i386/isa/elink.c optional ep | ie i386/isa/isa.c optional isa i386/isa/npx.c optional npx i386/isa/pmtimer.c optional pmtimer i386/isa/prof_machdep.c optional profiling-routine i386/linux/imgact_linux.c optional compat_linux i386/linux/linux_dummy.c optional compat_linux i386/linux/linux_locore.s optional compat_linux \ dependency "linux_assym.h" i386/linux/linux_machdep.c optional compat_linux i386/linux/linux_ptrace.c optional compat_linux i386/linux/linux_sysent.c optional compat_linux i386/linux/linux_sysvec.c optional compat_linux i386/pci/pci_bus.c optional pci i386/pci/pci_cfgreg.c optional pci i386/pci/pci_pir.c optional pci i386/svr4/svr4_locore.s optional compat_svr4 \ dependency "svr4_assym.h" \ warning "COMPAT_SVR4 is broken and should be avoided" i386/svr4/svr4_machdep.c optional compat_svr4 # # isdn4bsd, needed for isic | iwic | ifpi | ifpi2 | ihfc | ifpnp | itjc # i4b/layer1/i4b_hdlc.c optional ihfc | itjc i4b/layer1/i4b_l1dmux.c optional ifpi | ifpi2 | ifpnp | \ ihfc | isic | itjc | iwic i4b/layer1/i4b_l1lib.c optional ifpi | ifpi2 | ifpnp | \ ihfc | isic | itjc | iwic # # isdn4bsd, isic # i4b/layer1/isic/i4b_asuscom_ipac.c optional isic i4b/layer1/isic/i4b_avm_a1.c optional isic i4b/layer1/isic/i4b_bchan.c optional isic i4b/layer1/isic/i4b_ctx_s0P.c optional isic i4b/layer1/isic/i4b_drn_ngo.c optional isic i4b/layer1/isic/i4b_dynalink.c optional isic i4b/layer1/isic/i4b_elsa_qs1i.c optional isic i4b/layer1/isic/i4b_elsa_qs1p.c optional isic pci i4b/layer1/isic/i4b_elsa_pcc16.c optional isic i4b/layer1/isic/i4b_hscx.c optional isic i4b/layer1/isic/i4b_isac.c optional isic i4b/layer1/isic/i4b_isic.c optional isic i4b/layer1/isic/i4b_isic_isa.c optional isic i4b/layer1/isic/i4b_isic_pnp.c optional isic i4b/layer1/isic/i4b_itk_ix1.c optional isic i4b/layer1/isic/i4b_l1.c optional isic i4b/layer1/isic/i4b_l1fsm.c optional isic i4b/layer1/isic/i4b_siemens_isurf.c optional isic i4b/layer1/isic/i4b_sws.c optional isic i4b/layer1/isic/i4b_tel_s016.c optional isic i4b/layer1/isic/i4b_tel_s0163.c optional isic i4b/layer1/isic/i4b_tel_s08.c optional isic i4b/layer1/isic/i4b_usr_sti.c optional isic i4b/layer1/isic/i4b_diva.c optional isic # # isdn4bsd, iwic # i4b/layer1/iwic/i4b_iwic_pci.c optional iwic pci i4b/layer1/iwic/i4b_iwic_dchan.c optional iwic pci i4b/layer1/iwic/i4b_iwic_bchan.c optional iwic pci i4b/layer1/iwic/i4b_iwic_fsm.c optional iwic pci i4b/layer1/iwic/i4b_iwic_l1if.c optional iwic pci # # isdn4bsd, ifpi # i4b/layer1/ifpi/i4b_ifpi_pci.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_isac.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_l1.c optional ifpi pci i4b/layer1/ifpi/i4b_ifpi_l1fsm.c optional ifpi pci # # isdn4bsd, ifpi2 # i4b/layer1/ifpi2/i4b_ifpi2_pci.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_isacsx.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_l1.c optional ifpi2 pci i4b/layer1/ifpi2/i4b_ifpi2_l1fsm.c optional ifpi2 pci # # isdn4bsd, ifpnp # i4b/layer1/ifpnp/i4b_ifpnp_avm.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_isac.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_l1.c optional ifpnp i4b/layer1/ifpnp/i4b_ifpnp_l1fsm.c optional ifpnp # # isdn4bsd, ihfc # i4b/layer1/ihfc/i4b_ihfc_l1if.c optional ihfc i4b/layer1/ihfc/i4b_ihfc_pnp.c optional ihfc i4b/layer1/ihfc/i4b_ihfc_drv.c optional ihfc # # isdn4bsd, itjc # i4b/layer1/itjc/i4b_itjc_pci.c optional itjc i4b/layer1/itjc/i4b_itjc_isac.c optional itjc i4b/layer1/itjc/i4b_itjc_l1.c optional itjc i4b/layer1/itjc/i4b_itjc_l1fsm.c optional itjc # kern/imgact_aout.c optional compat_aout kern/imgact_gzip.c optional gzip libkern/divdi3.c standard libkern/ffsl.c standard libkern/flsl.c standard libkern/moddi3.c standard libkern/qdivrem.c standard libkern/ucmpdi2.c standard libkern/udivdi3.c standard libkern/umoddi3.c standard pc98/apm/apm_bioscall.S optional apm pc98/cbus/cbus_dma.c optional isa pc98/cbus/clock.c standard pc98/cbus/fdc.c optional fdc pc98/cbus/fdc_cbus.c optional fdc isa pc98/cbus/gdc.c optional gdc pc98/cbus/nmi.c standard pc98/cbus/olpt.c optional olpt pc98/cbus/pckbd.c optional pckbd pc98/cbus/pmc.c optional pmc pc98/cbus/scgdcrndr.c optional sc gdc pc98/cbus/scterm-sck.c optional sc pc98/cbus/scvtb.c optional sc pc98/cbus/sio.c optional sio pc98/cbus/sio_cbus.c optional sio isa pc98/cbus/syscons_cbus.c optional sc pc98/pc98/busio.s standard pc98/pc98/busiosubr.c standard pc98/pc98/canbepm.c optional canbepm pc98/pc98/canbus.c optional canbus pc98/pc98/canbus_if.m optional canbus pc98/pc98/machdep.c standard pc98/pc98/pc98_machdep.c standard pci/agp_ali.c optional agp pci/agp_amd.c optional agp pci/agp_i810.c optional agp pci/agp_intel.c optional agp pci/agp_nvidia.c optional agp pci/agp_sis.c optional agp pci/agp_via.c optional agp Index: head/sys/conf/files.sparc64 =================================================================== --- head/sys/conf/files.sparc64 (revision 163629) +++ head/sys/conf/files.sparc64 (revision 163630) @@ -1,137 +1,136 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # atkbdmap.h optional atkbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "atkbdmap.h" # ukbdmap.h optional ukbd_dflt_keymap \ compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" # hal.o optional ath_hal \ dependency "$S/contrib/dev/ath/public/sparc64-be-elf.hal.o.uu" \ compile-with "uudecode < $S/contrib/dev/ath/public/sparc64-be-elf.hal.o.uu" \ no-implicit-rule opt_ah.h optional ath_hal \ dependency "$S/contrib/dev/ath/public/sparc64-be-elf.opt_ah.h" \ compile-with "cp $S/contrib/dev/ath/public/sparc64-be-elf.opt_ah.h opt_ah.h" \ no-obj no-implicit-rule before-depend \ clean "opt_ah.h" # crypto/blowfish/bf_enc.c optional crypto | ipsec ipsec_esp crypto/des/des_enc.c optional crypto | ipsec ipsec_esp | \ netsmb dev/atkbdc/atkbd.c optional atkbd atkbdc dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc dev/atkbdc/atkbdc.c optional atkbdc dev/atkbdc/atkbdc_ebus.c optional atkbdc ebus dev/atkbdc/atkbdc_isa.c optional atkbdc isa dev/atkbdc/atkbdc_subr.c optional atkbdc dev/atkbdc/psm.c optional psm atkbdc dev/auxio/auxio.c optional auxio sbus | auxio ebus dev/esp/esp_sbus.c optional esp sbus dev/fb/creator.c optional creator sc dev/fb/fb.c optional sc dev/fb/machfb.c optional machfb sc -dev/fb/splash.c optional splash dev/hwpmc/hwpmc_sparc64.c optional hwpmc dev/kbd/kbd.c optional atkbd | sc | ukbd dev/le/if_le_ledma.c optional le sbus dev/ofw/ofw_bus_if.m standard dev/ofw/ofw_bus_subr.c standard dev/ofw/ofw_console.c optional ofw_console dev/ofw/openfirm.c standard dev/ofw/openfirmio.c standard dev/ofw/openpromio.c standard dev/pcf/envctrl.c optional pcf ebus dev/pcf/pcf_ebus.c optional pcf ebus dev/sound/sbus/cs4231.c optional snd_audiocs ebus | \ snd_audiocs sbus dev/syscons/scgfbrndr.c optional sc dev/syscons/scterm-sc.c optional sc dev/syscons/scvtb.c optional sc dev/uart/uart_cpu_sparc64.c optional uart dev/uart/uart_kbd_sun.c optional uart sc geom/geom_bsd.c standard geom/geom_bsd_enc.c standard geom/geom_sunlabel.c standard geom/geom_sunlabel_enc.c standard kern/syscalls.c optional ktr libkern/ffs.c standard libkern/ffsl.c standard libkern/fls.c standard libkern/flsl.c standard sparc64/central/central.c optional central sparc64/creator/creator_upa.c optional creator sc sparc64/ebus/ebus.c optional ebus sparc64/fhc/clkbrd.c optional clkbrd fhc sparc64/fhc/fhc.c optional fhc sparc64/fhc/fhc_central.c optional fhc central sparc64/fhc/fhc_nexus.c optional fhc sparc64/isa/isa.c optional isa sparc64/isa/isa_dma.c optional isa sparc64/isa/ofw_isa.c optional ebus | isa sparc64/pci/apb.c optional pci sparc64/pci/ofw_pci.c optional pci sparc64/pci/ofw_pcib.c optional pci sparc64/pci/ofw_pcib_subr.c optional pci sparc64/pci/ofw_pcibus.c optional pci sparc64/pci/ofw_pci_if.m optional pci sparc64/pci/psycho.c optional pci sparc64/sbus/dma_sbus.c optional sbus sparc64/sbus/sbus.c optional sbus sparc64/sbus/lsi64854.c optional sbus sparc64/sparc64/autoconf.c standard sparc64/sparc64/bus_machdep.c standard sparc64/sparc64/cache.c standard sparc64/sparc64/cheetah.c standard sparc64/sparc64/clock.c standard sparc64/sparc64/counter.c standard sparc64/sparc64/db_disasm.c optional ddb sparc64/sparc64/db_interface.c optional ddb sparc64/sparc64/db_trace.c optional ddb sparc64/sparc64/db_hwwatch.c optional ddb sparc64/sparc64/dump_machdep.c standard sparc64/sparc64/elf_machdep.c standard sparc64/sparc64/exception.S standard no-obj sparc64/sparc64/eeprom.c optional eeprom ebus | eeprom fhc | \ eeprom sbus sparc64/sparc64/gdb_machdep.c optional gdb sparc64/sparc64/identcpu.c standard sparc64/sparc64/in_cksum.c optional inet sparc64/sparc64/interrupt.S standard no-obj sparc64/sparc64/intr_machdep.c standard sparc64/sparc64/iommu.c standard sparc64/sparc64/locore.S standard no-obj sparc64/sparc64/machdep.c standard sparc64/sparc64/mem.c optional mem sparc64/sparc64/mp_exception.S optional smp sparc64/sparc64/mp_locore.S optional smp sparc64/sparc64/mp_machdep.c optional smp sparc64/sparc64/nexus.c standard sparc64/sparc64/ofw_bus.c standard sparc64/sparc64/ofw_machdep.c standard sparc64/sparc64/pmap.c standard sparc64/sparc64/prof_machdep.c optional profiling-routine sparc64/sparc64/rtc.c optional rtc ebus | rtc isa sparc64/sparc64/rwindow.c standard sparc64/sparc64/sc_machdep.c optional sc sparc64/sparc64/spitfire.c standard sparc64/sparc64/support.S standard sparc64/sparc64/sys_machdep.c standard sparc64/sparc64/swtch.S standard sparc64/sparc64/tick.c standard sparc64/sparc64/tlb.c standard sparc64/sparc64/trap.c standard sparc64/sparc64/tsb.c standard sparc64/sparc64/uio_machdep.c standard sparc64/sparc64/vm_machdep.c standard Index: head/sys/i386/conf/NOTES =================================================================== --- head/sys/i386/conf/NOTES (revision 163629) +++ head/sys/i386/conf/NOTES (revision 163630) @@ -1,1217 +1,1215 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # $FreeBSD$ # # # We want LINT to cover profiling as well. profile 2 ##################################################################### # SMP OPTIONS: # # The apic device enables the use of the I/O APIC for interrupt delivery. # The apic device can be used in both UP and SMP kernels, but is required # for SMP kernels. Thus, the apic device is not strictly an SMP option, # but it is a prerequisite for SMP. # # Notes: # # HTT CPUs should only be used if they are enabled in the BIOS. For # the ACPI case, ACPI only correctly tells us about any HTT CPUs if # they are enabled. However, most HTT systems do not list HTT CPUs # in the MP Table if they are enabled, thus we guess at the HTT CPUs # for the MP Table case. However, we shouldn't try to guess and use # these CPUs if HTT is disabled. Thus, HTT guessing is only enabled # for the MP Table if the user explicitly asks for it via the # MPTABLE_FORCE_HTT option. Do NOT use this option if you have HTT # disabled in your BIOS. # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Mandatory: device apic # I/O apic # Optional: options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table options IPI_PREEMPTION # # Watchdog routines. # options MP_WATCHDOG # Debugging options. # options STOP_NMI # Stop CPUS using NMI instead of IPI options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu I486_CPU cpu I586_CPU # aka Pentium(tm) cpu I686_CPU # aka Pentium Pro(tm) # # Options for CPU features. # # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has # forgotten to enable them. # # CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning # CPU if CPU supports it. The default is double-clock mode on # BlueLightning CPU box. # # CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM # BlueLightning CPU. It works only with Cyrix FPU, and this option # should not be used with Intel FPU. # # CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). # # CPU_CYRIX_NO_LOCK enables weak locking for the entire address space # of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. # Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) # # CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct # mapped mode. Default is 2-way set associative mode. # # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables # reorder). This option should not be used if you use memory mapped # I/O device(s). # # CPU_DISABLE_CMPXCHG disables the CMPXCHG instruction on > i386 IA32 # machines. VmWare 3.x seems to emulate this instruction poorly, causing # the guest OS to run very slowly. This problem appears to be fixed in # VmWare 4.x, at least in version 4.5.2, so that enabling this option with # VmWare 4.x will result in locking operations to be 20-30 times slower. # Enabling this with an SMP kernel will cause the kernel to be unusable. # # CPU_DISABLE_SSE explicitly prevents I686_CPU from turning on SSE. # # CPU_ELAN enables support for AMDs ElanSC520 CPU. # CPU_ELAN_PPS enables precision timestamp code. # CPU_ELAN_XTAL sets the clock crystal frequency in Hz. # # CPU_ENABLE_LONGRUN enables support for Transmeta Crusoe LongRun # technology which allows to restrict power consumption of the CPU by # using group of hw.crusoe.* sysctls. # # CPU_FASTER_5X86_FPU enables faster FPU exception handler. # # CPU_GEODE is for the SC1100 Geode embedded processor. This option # is necessary because the i8254 timecounter is toast. # # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products # for i386 machines. # # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively # (no clock delay). # # CPU_L2_LATENCY specifies the L2 cache latency value. This option is used # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. # The default value is 5. # # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE # 1). # # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option # is useful when you use Socket 8 to Socket 370 converter, because most Pentium # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. # # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). # # CPU_SOEKRIS enables support www.soekris.com hardware. # # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU # enters suspend mode following execution of HALT instruction. # # CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). # # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD # K5/K6/K6-2 CPUs. # # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache # flush at hold state. # # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs # without cache flush at hold state, and (2) write-back CPU cache on # Cyrix 6x86 whose revision < 2.7 (NOTE 2). # # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is # executed. This option is only needed if I586_CPU is also defined, # and should be included for any non-Pentium CPU that defines it. # # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors # which indicates that the 15-16MB range is *definitely* not being # occupied by an ISA memory hole. # # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. # These options may crash your system. # # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled # in write-through mode when revision < 2.7. If revision of Cyrix # 6x86 >= 2.7, CPU cache is always enabled in write-back mode. # # NOTE 3: This option may cause failures for software that requires # locked cycles in order to operate correctly. # options CPU_ATHLON_SSE_HACK options CPU_BLUELIGHTNING_3X options CPU_BLUELIGHTNING_FPU_OP_CACHE options CPU_BTB_EN options CPU_DIRECT_MAPPED_CACHE options CPU_DISABLE_5X86_LSSER options CPU_DISABLE_CMPXCHG #options CPU_DISABLE_SSE options CPU_ELAN options CPU_ELAN_PPS options CPU_ELAN_XTAL=32768000 options CPU_ENABLE_LONGRUN options CPU_FASTER_5X86_FPU options CPU_GEODE options CPU_I486_ON_386 options CPU_IORT options CPU_L2_LATENCY=5 options CPU_LOOP_EN options CPU_PPRO2CELERON options CPU_RSTK_EN options CPU_SOEKRIS options CPU_SUSP_HLT options CPU_UPGRADE_HW_CACHE options CPU_WT_ALLOC options CYRIX_CACHE_WORKS options CYRIX_CACHE_REALLY_WORKS #options NO_F00F_HACK # Debug options options NPX_DEBUG # enable npx debugging # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON # # XBOX causes the kernel to be bootable on the Microsoft XBox console system. # The resulting kernel will auto-detect whether it is being booted on a XBox, # so kernels compiled with this option will also work on an ordinary PC. # This option require I686_CPU. # # xboxfb includes support for the XBox frame buffer device. It is fully USB- # keyboard aware, and will only be used if an xbox is detected. This option # (obviously) requires XBOX support in your kernel. # # NOTE: xboxfb currently conflicts with syscons(4); if you have an XBOX and # include both in your kernel; you will not get any video output. Ordinary # PC's do not suffer from this. # options XBOX device xboxfb ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING ##################################################################### # CLOCK OPTIONS # The following options are used for debugging clock behavior only, and # should not be used for production systems. # CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at # startup until the user presses a key. (The i8254 clock is always # calibrated relative to the RTC (mc146818a) and this option causes the # calibration to be repeated.) options CLK_CALIBRATION_LOOP # CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 # clock to actually be used. options CLK_USE_I8254_CALIBRATION ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # # sio: serial ports (see sio(4)), including support for various # PC Card devices, such as Modem and NICs # device sio hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" # `flags' specific to sio(4). # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x20 force this unit to be the console (unless there is another # higher priority console). This replaces the COMCONSOLE option. # 0x40 reserve this unit for low level console operations. Do not # access the device in any normal way. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # PnP `flags' # 0x1 disable probing of this device. Used to prevent your modem # from being attached as a PnP modem. # Other flags for sio that aren't documented in the man page. # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for # ST16650A-compatible UARTs. # Options for sio: options COM_ESP # Code for Hayes ESP. options COM_MULTIPORT # Code for some cards with shared IRQs. options CONSPEED=115200 # Speed for serial console # (default 9600). device speaker #Play IBM BASIC-style noises out your speaker hint.speaker.0.at="isa" hint.speaker.0.port="0x61" device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! device apm_saver # Requires APM ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # Required by npx(4) # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # EISA bus # # The EISA bus device is `eisa'. It provides auto-detection and # configuration support for all devices on the EISA bus. device eisa # By default, only 10 EISA slots are probed, since the slot numbers # above clash with the configuration address space of the PCI subsystem, # and the EISA probe is not very smart about this. This is sufficient # for most machines, but in particular the HP NetServer LC series comes # with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11, # thus you need to bump this figure to 12 for them. options EISA_SLOTS=12 # # MCA bus: # # The MCA bus device is `mca'. It provides auto-detection and # configuration support for all devices on the MCA bus. # No hints are required for MCA. device mca # # PCI bus & PCI options: # device pci # # AGP GART support device agp ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG # # The Numeric Processing eXtension driver. This is non-optional. device npx hint.npx.0.flags="0x0" hint.npx.0.irq="13" # # `flags' for npx0: # 0x01 don't use the npx registers to optimize bcopy. # 0x02 don't use the npx registers to optimize bzero. # 0x04 don't use the npx registers to optimize copyin or copyout. # The npx registers are normally used to optimize copying and zeroing when # all of the following conditions are satisfied: # I586_CPU is an option # the cpu is an i586 (perhaps not a Pentium) # the probe for npx0 succeeds # INT 16 exception handling works. # Then copying and zeroing using the npx registers is normally 30-100% faster. # The flags can be used to control cases where it doesn't work or is slower. # Setting them at boot time using hints works right (the optimizations # are not used until later in the bootstrap when npx0 is attached). # Flag 0x08 automatically disables the i586 optimized routines. # # # Optional devices: # # PS/2 mouse device psm hint.psm.0.at="atkbdc" hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=jp.106 # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG -device splash # Splash screen and screen saver support - # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # # To enable Linuxulator support, one must also include COMPAT_LINUX in the # config as well. The other option is to load both as modules. device tdfx # Enable 3Dfx Voodoo support device tdfx_linux # Enable Linuxulator support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). # # ACPI_NO_SEMAPHORES makes the AcpiOs*Semaphore routines a no-op. # # ACPICA_PEDANTIC enables strict checking of AML. Our default is to # relax these checks to allow code generated by the Microsoft compiler # to still execute. # # Note that building ACPI into the kernel is deprecated; the module is # normally loaded automatically by the loader. device acpi options ACPI_DEBUG #!options ACPI_NO_SEMAPHORES #!options ACPICA_PEDANTIC # ACPI Asus Extras (LCD backlight/brightness, video output, etc.) device acpi_asus # ACPI Fujitsu Extras (Buttons) device acpi_fujitsu # ACPI extras driver for IBM laptops device acpi_ibm # ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.) device acpi_panasonic # ACPI Sony extra (LCD brightness) device acpi_sony # ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.) device acpi_toshiba # ACPI Video Extensions (LCD backlight/brightness, video output, etc.) device acpi_video # ACPI Docking Station device acpi_dock # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # Direct Rendering modules for 3D acceleration. device drm # DRM core module required by DRM drivers device i915drm # Intel i830 through i915 device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL device mgadrm # AGP Matrox G200, G400, G450, G550 device r128drm # ATI Rage 128 device radeondrm # ATI Radeon device savagedrm # S3 Savage3D, Savage4 device sisdrm # SiS 300/305, 540, 630 device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee options DRM_DEBUG # Include debug printfs (slow) # # mse: Logitech and ATI InPort bus mouse ports device mse hint.mse.0.at="isa" hint.mse.0.port="0x23c" hint.mse.0.irq="5" # # Network interfaces: # # ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver # (requires sppp) # arl: Aironet Arlan 655 wireless adapters. # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor # with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if # NETGRAPH_CRONYX is configured) # cp: Cronyx Tau-PCI sync single/dual/four port # V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1 # serial adaptor (requires sppp (default), or NETGRAPH if # NETGRAPH_CRONYX is configured) # cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters # ctau: Cronyx Tau sync dual port V.35/RS-232/RS-530/RS-449/X.21/G.703/E1 # serial adaptor (requires sppp (default), or NETGRAPH if # NETGRAPH_CRONYX is configured) # cx: Cronyx Sigma multiport sync/async adapter (requires sppp (default), # or NETGRAPH if NETGRAPH_CRONYX is configured) # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 # HP PC Lan+, various PC Card devices # (requires miibus) # ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; # Intel EtherExpress # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # nve: nVidia nForce MCP on-board Ethernet Networking # oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133. # Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140, # OC-3141, OC-3540 and OC-3250. # ral: Ralink Technology IEEE 802.11 wireless adapter # sbni: Granch SBNI12-xx ISA and PCI adapters # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) # ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter # wl: Lucent Wavelan (ISA card only). # Order for ISA/EISA devices is important here device ar hint.ar.0.at="isa" hint.ar.0.port="0x300" hint.ar.0.irq="10" hint.ar.0.maddr="0xd0000" device arl hint.arl.0.at="isa" hint.arl.0.irq="9" hint.arl.0.maddr="0xd0000" device ce device cp device cs hint.cs.0.at="isa" hint.cs.0.port="0x300" device ctau hint.ctau.0.at="isa" hint.ctau.0.port="0x240" hint.ctau.0.irq="15" hint.ctau.0.drq="7" device cx hint.cx.0.at="isa" hint.cx.0.port="0x240" hint.cx.0.irq="15" hint.cx.0.drq="7" #options NETGRAPH_CRONYX # Enable NETGRAPH support for Cronyx adapter(s) device ed options ED_3C503 options ED_HPP options ED_SIC hint.ed.0.at="isa" hint.ed.0.port="0x280" hint.ed.0.irq="5" hint.ed.0.maddr="0xd8000" device ie # Hints only required for Starlan hint.ie.2.at="isa" hint.ie.2.port="0x300" hint.ie.2.irq="5" hint.ie.2.maddr="0xd0000" device iwi device ipw # Hint for the i386-only ISA front-end of le(4). hint.le.0.at="isa" hint.le.0.port="0x280" hint.le.0.irq="10" hint.le.0.drq="0" device nfe # nVidia nForce MCP on-board Ethernet Networking device nve # nVidia nForce MCP on-board Ethernet Networking device oltr hint.oltr.0.at="isa" device ral device sbni hint.sbni.0.at="isa" hint.sbni.0.port="0x210" hint.sbni.0.irq="0xefdead" hint.sbni.0.flags="0" device sr hint.sr.0.at="isa" hint.sr.0.port="0x300" hint.sr.0.irq="5" hint.sr.0.maddr="0xd0000" device ural device wl hint.wl.0.at="isa" hint.wl.0.port="0x300" options WLCACHE # enables the signal-strength cache options WLDEBUG # enables verbose debugging output device ath device ath_hal # Atheros HAL (includes binary component) #device ath_rate_amrr # AMRR rate control for ath driver #device ath_rate_onoe # Onoe rate control for ath driver device ath_rate_sample # SampleRate rate control for the ath driver #device wlan # 802.11 layer # # ATA raid adapters # device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # 3ware 9000 series PATA/SATA RAID controller driver and options. # The driver is implemented as a SIM, and so, needs the CAM infrastructure. # options TWA_DEBUG # 0-10; 10 prints the most messages. options TWA_FLASH_FIRMWARE # firmware image bundled when defined. device twa # 3ware 9000 series PATA/SATA RAID # # SCSI host adapters: # # ncv: NCR 53C500 based SCSI host adapters. # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. # stg: TMC 18C30, 18C50 based SCSI host adapters. device ncv device nsp device stg hint.stg.0.at="isa" hint.stg.0.port="0x140" hint.stg.0.port="11" # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # The 'asr' driver provides support for current DPT/Adaptec SCSI RAID # controllers (SmartRAID V and VI and later). # These controllers require the CAM infrastructure. # device asr # # Highpoint RocketRAID 182x. This is really just software RAID on a # Marvell SATA chip. device hptmv # # Highpoint RocketRAID 232x. This is software RAID but with hardware # acceleration assistance for RAID_5. device rr232x # # IBM (now Adaptec) ServeRAID controllers device ips # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support ##################################################################### # # Miscellaneous hardware: # # apm: Laptop Advanced Power Management (experimental) # ipmi: Intelligent Platform Management Interface # pmtimer: Timer device driver for power management events (APM or ACPI) # smapi: System Management Application Program Interface driver # smbios: DMI/SMBIOS entry point # vpd: Vital Product Data kernel interface # cy: Cyclades serial driver # digi: Digiboard driver # spic: Sony Programmable I/O controller (VAIO notebooks) # Notes on APM # The flags takes the following meaning for apm0: # 0x0020 Statclock is broken. # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. # Notes on the Sony Programmable I/O controller # This is a temporary driver that should someday be replaced by something # that hooks into the ACPI layer. The device is hooked to the PIIX4's # General Device 10 decoder, which means you have to fiddle with PCI # registers to map it in, even though it is otherwise treated here as # an ISA device. At the moment, the driver polls, although the device # is capable of generating interrupts. It largely undocumented. # The port location in the hint is where you WANT the device to be # mapped. 0x10a0 seems to be traditional. At the moment the jogdial # is the only thing truly supported, but apparently a fair percentage # of the Vaio extra features are controlled by this device. device apm hint.apm.0.flags="0x20" device ipmi device smapi device smbios device vpd device pmtimer # Adjust system timer at wakeup time device cy options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared hint.cy.0.at="isa" hint.cy.0.irq="10" hint.cy.0.maddr="0xd4000" hint.cy.0.msize="0x2000" device digi hint.digi.0.at="isa" hint.digi.0.port="0x104" hint.digi.0.maddr="0xd0000" # BIOS & FEP/OS components of device digi. device digi_CX device digi_CX_PCI device digi_EPCX device digi_EPCX_PCI device digi_Xe device digi_Xem device digi_Xr # Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) device pbio hint.pbio.0.at="isa" hint.pbio.0.port="0x360" device spic hint.spic.0.at="isa" hint.spic.0.port="0x10a0" # HOT1 Xilinx 6200 card (http://www.vcc.com/) device xrpu # # Laptop/Notebook options: # # See also: # apm under `Miscellaneous hardware' # above. # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller # device pcf hint.pcf.0.at="isa" hint.pcf.0.port="0x320" hint.pcf.0.irq="5" # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # device ichwd #--------------------------------------------------------------------------- # ISDN4BSD # # See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. # # i4b passive ISDN cards support contains the following hardware drivers: # # isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver # iwic - Winbond W6692 PCI bus ISDN S/T interface controller # ifpi - AVM Fritz!Card PCI driver # ifpi2 - AVM Fritz!Card PCI version 2 driver # ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver # ifpnp - AVM Fritz!Card PnP driver # itjc - Siemens ISAC / TJNet Tiger300/320 chipset # # i4b active ISDN cards support contains the following hardware drivers: # # iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 # # Note that the ``options'' (if given) and ``device'' lines must BOTH # be uncommented to enable support for a given card ! # # In addition to a hardware driver (and probably an option) the mandatory # ISDN protocol stack devices and the mandatory support device must be # enabled as well as one or more devices from the optional devices section. # #--------------------------------------------------------------------------- # isic driver (Siemens/Infineon chipsets) # device isic # # ISA bus non-PnP Cards: # ---------------------- # # Teles S0/8 or Niccy 1008 options TEL_S0_8 hint.isic.0.at="isa" hint.isic.0.maddr="0xd0000" hint.isic.0.irq="5" hint.isic.0.flags="1" # # Teles S0/16 or Creatix ISDN-S0 or Niccy 1016 options TEL_S0_16 hint.isic.0.at="isa" hint.isic.0.port="0xd80" hint.isic.0.maddr="0xd0000" hint.isic.0.irq="5" hint.isic.0.flags="2" # # Teles S0/16.3 options TEL_S0_16_3 hint.isic.0.at="isa" hint.isic.0.port="0xd80" hint.isic.0.irq="5" hint.isic.0.flags="3" # # AVM A1 or AVM Fritz!Card options AVM_A1 hint.isic.0.at="isa" hint.isic.0.port="0x340" hint.isic.0.irq="5" hint.isic.0.flags="4" # # USRobotics Sportster ISDN TA intern options USR_STI hint.isic.0.at="isa" hint.isic.0.port="0x268" hint.isic.0.irq="5" hint.isic.0.flags="7" # # ITK ix1 Micro ( < V.3, non-PnP version ) options ITKIX1 hint.isic.0.at="isa" hint.isic.0.port="0x398" hint.isic.0.irq="10" hint.isic.0.flags="18" # # ELSA PCC-16 options ELSA_PCC16 hint.isic.0.at="isa" hint.isic.0.port="0x360" hint.isic.0.irq="10" hint.isic.0.flags="20" # # ISA bus PnP Cards: # ------------------ # # Teles S0/16.3 PnP options TEL_S0_16_3_P # # Creatix ISDN-S0 P&P options CRTX_S0_P # # Dr. Neuhaus Niccy Go@ options DRN_NGO # # Sedlbauer Win Speed options SEDLBAUER # # Dynalink IS64PH options DYNALINK # # ELSA QuickStep 1000pro ISA options ELSA_QS1ISA # # Siemens I-Surf 2.0 options SIEMENS_ISURF2 # # Asuscom ISDNlink 128K ISA options ASUSCOM_IPAC # # Eicon Diehl DIVA 2.0 and 2.02 options EICON_DIVA # # Compaq Microcom 610 ISDN card (Compaq series PSB2222I) options COMPAQ_M610 # # PCI bus Cards: # -------------- # # ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) options ELSA_QS1PCI # #--------------------------------------------------------------------------- # ifpnp driver for AVM Fritz!Card PnP # # AVM Fritz!Card PnP device ifpnp # #--------------------------------------------------------------------------- # ihfc driver for Cologne Chip ISA chipsets (experimental!) # # Teles 16.3c ISA PnP # AcerISDN P10 ISA PnP # TELEINT ISDN SPEED No.1 device ihfc # #--------------------------------------------------------------------------- # ifpi driver for AVM Fritz!Card PCI # # AVM Fritz!Card PCI device ifpi # #--------------------------------------------------------------------------- # ifpi2 driver for AVM Fritz!Card PCI version 2 # # AVM Fritz!Card PCI version 2 device ifpi2 # #--------------------------------------------------------------------------- # iwic driver for Winbond W6692 chipset # # ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) device iwic # #--------------------------------------------------------------------------- # itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset # # Traverse Technologies NETjet-S # Teles PCI-TJ device itjc # #--------------------------------------------------------------------------- # iavc driver (AVM active cards, needs i4bcapi driver!) # device iavc # # AVM B1 ISA bus (PnP mode not supported!) # ---------------------------------------- hint.iavc.0.at="isa" hint.iavc.0.port="0x150" hint.iavc.0.irq="5" # #--------------------------------------------------------------------------- # ISDN Protocol Stack - mandatory for all hardware drivers # # Q.921 / layer 2 - i4b passive cards D channel handling device i4bq921 # # Q.931 / layer 3 - i4b passive cards D channel handling device i4bq931 # # layer 4 - i4b common passive and active card handling device i4b # #--------------------------------------------------------------------------- # ISDN devices - mandatory for all hardware drivers # # userland driver to do ISDN tracing (for passive cards only) device i4btrc options NI4BTRC=4 # # userland driver to control the whole thing device i4bctl # #--------------------------------------------------------------------------- # ISDN devices - optional # # userland driver for access to raw B channel device i4brbch options NI4BRBCH=4 # # userland driver for telephony device i4btel options NI4BTEL=2 # # network driver for IP over raw HDLC ISDN device i4bipr options NI4BIPR=4 # enable VJ header compression detection for ipr i/f options IPR_VJ # enable logging of the first n IP packets to isdnd (n=32 here) options IPR_LOG=32 # # network driver for sync PPP over ISDN; requires an equivalent # number of sppp device to be configured device i4bisppp options NI4BISPPP=4 # # B-channel interface to the netgraph subsystem device i4bing options NI4BING=2 # # CAPI driver needed for active ISDN cards (see iavc driver above) device i4bcapi # #--------------------------------------------------------------------------- # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # Set the number of PV entries per process. Increasing this can # stop panics related to heavy use of shared memory. However, that can # (combined with large amounts of physical memory) cause panics at # boot time due the kernel running out of VM space. # # If you're tweaking this, you might also want to increase the sysctls # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". # # The value below is the one more than the default. # options PMAP_SHPGPERPROC=201 # # Change the size of the kernel virtual address space. Due to # constraints in loader(8) on i386, this must be a multiple of 4. # 256 = 1 GB of kernel address space. Increasing this also causes # a reduction of the address space in user processes. 512 splits # the 4GB cpu address space in half (2GB user, 2GB kernel). For PAE # kernels, the value will need to be double non-PAE. A value of 1024 # for PAE kernels is necessary to split the address space in half. # This will likely need to be increased to handle memory sizes >4GB. # PAE kernels default to a value of 512. # options KVA_PAGES=260 ##################################################################### # ABI Emulation # Enable iBCS2 runtime support for SCO and ISC binaries options IBCS2 # Emulate spx device for client side of SVR3 local X interface options SPX_HACK # Enable Linux ABI emulation options COMPAT_LINUX # Enable i386 a.out binary support options COMPAT_AOUT # Enable the linux-like proc filesystem support (requires COMPAT_LINUX # and PSEUDOFS) options LINPROCFS #Enable the linux-like sys filesystem support (requires COMPAT_LINUX # and PSEUDOFS) options LINSYSFS # # SysVR4 ABI emulation # # The svr4 ABI emulator can be statically compiled into the kernel or loaded as # a KLD module. # The STREAMS network emulation code can also be compiled statically or as a # module. If loaded as a module, it must be loaded before the svr4 module # (the /usr/sbin/svr4 script does this for you). If compiling statically, # the `streams' device must be configured into any kernel which also # specifies COMPAT_SVR4. It is possible to have a statically-configured # STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 # script understands that it doesn't need to load the `streams' module under # those circumstances. # Caveat: At this time, `options KTRACE' is required for the svr4 emulator # (whether static or dynamic). # options COMPAT_SVR4 # build emulator statically options DEBUG_SVR4 # enable verbose debugging device streams # STREAMS network driver (required for svr4). # Enable NDIS binary driver support options NDISAPI device ndis ##################################################################### # VM OPTIONS # Disable the 4 MByte page PSE CPU feature. The PSE feature allows the # kernel to use 4 MByte pages to map the kernel instead of 4k pages. # This saves on the amount of memory needed for page tables needed to # map the kernel. You should only disable this feature as a temporary # workaround if you are having problems with it enabled. # #options DISABLE_PSE # Disable the global pages PGE CPU feature. The PGE feature allows pages # to be marked with the PG_G bit. TLB entries for these pages are not # flushed from the cache when %cr3 is reloaded. This can make context # switches less expensive. You should only disable this feature as a # temporary workaround if you are having problems with it enabled. # #options DISABLE_PG_G # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=3 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options FB_INSTALL_CDEV # install a CDEV entry in /dev # PECOFF module (Win32 Execution Format) options PECOFF_SUPPORT options PECOFF_DEBUG options I4B_SMP_WORKAROUND options I586_PMC_GUPROF=0x70000 options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE # asr old ioctls support, needed by raidutils options ASR_COMPAT Index: head/sys/ia64/conf/NOTES =================================================================== --- head/sys/ia64/conf/NOTES (revision 163629) +++ head/sys/ia64/conf/NOTES (revision 163630) @@ -1,108 +1,106 @@ # $FreeBSD$ # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # directive: cpu # You must specify at least one CPU (the one you intend to run on). Deleting # the support for CPUs you don't need to use may make parts of the system run # faster. There's currently no special code for the different CPUs. Note also # that the cpu declares the family. We may need to add support for specifying # particular models. cpu ITANIUM cpu ITANIUM2 # option: COMPAT_IA32 # This option enables the support for execution of i386 (32-bit) programs on # ia64. It is based on the ia32 emulation in the processor. options COMPAT_IA32 # option: LOG2_ID_PAGE_SIZE # Specify the log2 size of the identity (direct) mappings in regions 6 and 7 # of the virtual address space. options LOG2_ID_PAGE_SIZE=27 # 128M # option: LOG2_PAGE_SIZE # Specify the log2 size of the page to be used for virtual memory management. # The page size being equal to 1< i386 IA32 # machines. VmWare 3.x seems to emulate this instruction poorly, causing # the guest OS to run very slowly. This problem appears to be fixed in # VmWare 4.x, at least in version 4.5.2, so that enabling this option with # VmWare 4.x will result in locking operations to be 20-30 times slower. # Enabling this with an SMP kernel will cause the kernel to be unusable. # # CPU_DISABLE_SSE explicitly prevents I686_CPU from turning on SSE. # # CPU_FASTER_5X86_FPU enables faster FPU exception handler. # # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products # for i386 machines. # # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively # (no clock delay). # # CPU_L2_LATENCY specifies the L2 cache latency value. This option is used # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. # The default value is 5. # # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE # 1). # # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option # is useful when you use Socket 8 to Socket 370 converter, because most Pentium # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. # # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). # # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU # enters suspend mode following execution of HALT instruction. # # CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). # # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD # K5/K6/K6-2 CPUs. # # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache # flush at hold state. # # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs # without cache flush at hold state, and (2) write-back CPU cache on # Cyrix 6x86 whose revision < 2.7 (NOTE 2). # # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is # executed. This option is only needed if I586_CPU is also defined, # and should be included for any non-Pentium CPU that defines it. # # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors # which indicates that the 15-16MB range is *definitely* not being # occupied by an ISA memory hole. # # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. # These options may crash your system. # # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled # in write-through mode when revision < 2.7. If revision of Cyrix # 6x86 >= 2.7, CPU cache is always enabled in write-back mode. # # NOTE 3: This option may cause failures for software that requires # locked cycles in order to operate correctly. # options CPU_BLUELIGHTNING_3X options CPU_BLUELIGHTNING_FPU_OP_CACHE options CPU_BTB_EN options CPU_DIRECT_MAPPED_CACHE options CPU_DISABLE_5X86_LSSER options CPU_DISABLE_CMPXCHG #options CPU_DISABLE_SSE options CPU_FASTER_5X86_FPU options CPU_I486_ON_386 options CPU_IORT options CPU_L2_LATENCY=5 options CPU_LOOP_EN options CPU_PPRO2CELERON options CPU_RSTK_EN options CPU_SUSP_HLT options CPU_UPGRADE_HW_CACHE options CPU_WT_ALLOC options CYRIX_CACHE_WORKS options CYRIX_CACHE_REALLY_WORKS #options NO_F00F_HACK # Debug options options NPX_DEBUG # enable npx debugging # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING ##################################################################### # CLOCK OPTIONS # The following options are used for debugging clock behavior only, and # should not be used for production systems. # CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at # startup until the user presses a key. (The i8254 clock is always # calibrated relative to the RTC (mc146818a) and this option causes the # calibration to be repeated.) options CLK_CALIBRATION_LOOP # CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 # clock to actually be used. options CLK_USE_I8254_CALIBRATION ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # # sio: serial ports (see sio(4)), including support for various # PC Card devices, such as Modem and NICs # device sio hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" # `flags' specific to sio(4). # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x20 force this unit to be the console (unless there is another # higher priority console). This replaces the COMCONSOLE option. # 0x40 reserve this unit for low level console operations. Do not # access the device in any normal way. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # PnP `flags' # 0x1 disable probing of this device. Used to prevent your modem # from being attached as a PnP modem. # Other flags for sio that aren't documented in the man page. # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for # ST16650A-compatible UARTs. # Options for sio: options COM_ESP # Code for Hayes ESP. options COM_MULTIPORT # Code for some cards with shared IRQs. options CONSPEED=115200 # Speed for serial console # (default 9600). device speaker #Play IBM BASIC-style noises out your speaker hint.speaker.0.at="isa" hint.speaker.0.port="0x35" device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! device apm_saver # Requires APM ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET options EPSON_BOUNCEDMA options EPSON_MEMWIN # # PCI bus & PCI options: # device pci # # AGP GART support device agp ##################################################################### # HARDWARE DEVICE CONFIGURATION # PC98 keyboard device pckbd hint.pckbd.0.at="isa" hint.pckbd.0.port="0x041" hint.pckbd.0.irq="1" # GDC screen device gdc hint.gdc.0.at="isa" options LINE30 # # The Numeric Processing eXtension driver. This is non-optional. device npx # # `flags' for npx0: # 0x01 don't use the npx registers to optimize bcopy. # 0x02 don't use the npx registers to optimize bzero. # 0x04 don't use the npx registers to optimize copyin or copyout. # The npx registers are normally used to optimize copying and zeroing when # all of the following conditions are satisfied: # I586_CPU is an option # the cpu is an i586 (perhaps not a Pentium) # the probe for npx0 succeeds # INT 16 exception handling works. # Then copying and zeroing using the npx registers is normally 30-100% faster. # The flags can be used to control cases where it doesn't work or is slower. # Setting them at boot time using hints works right (the optimizations # are not used until later in the bootstrap when npx0 is attached). # Flag 0x08 automatically disables the i586 optimized routines. # # # Optional devices: # -device splash # Splash screen and screen saver support - # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # # To enable Linuxulator support, one must also include COMPAT_LINUX in the # config as well. The other option is to load both as modules. device tdfx # Enable 3Dfx Voodoo support device tdfx_linux # Enable Linuxulator support # Direct Rendering modules for 3D acceleration. device drm # DRM core module required by DRM drivers device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL device mgadrm # AGP Matrox G200, G400, G450, G550 device r128drm # ATI Rage 128 device radeondrm # ATI Radeon device savagedrm # S3 Savage3D, Savage4 device sisdrm # SiS 300/305, 540, 630 device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee options DRM_DEBUG # Include debug printfs (slow) # # Bus mouse # device mse hint.mse.0.at="isa" hint.mse.0.port="0x7fd9" hint.mse.0.irq="13" # # Network interfaces: # # ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver # (requires sppp) # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor # with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if # NETGRAPH_CRONYX is configured) # cp: Cronyx Tau-PCI sync single/dual/four port # V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1 # serial adaptor (requires sppp (default), or NETGRAPH if # NETGRAPH_CRONYX is configured) # cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters and pccard # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 # HP PC Lan+, various PC Card devices # (requires miibus) # ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; # Intel EtherExpress # oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133. # Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140, # OC-3141, OC-3540 and OC-3250. # ral: Ralink Technology IEEE 802.11 wireless adapter # sbni: Granch SBNI12-xx ISA and PCI adapters # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) # ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter # Order for ISA/EISA devices is important here device ar device ce device cp device cs device ed hint.ed.0.at="isa" hint.ed.0.port="0x280" hint.ed.0.irq="5" hint.ed.0.maddr="0xd8000" device ie # Hints only required for Starlan hint.ie.2.at="isa" hint.ie.2.port="0x300" hint.ie.2.irq="5" hint.ie.2.maddr="0xd0000" # Hint for the PC98-only C-NET(98)S C-bus front-end of le(4). hint.le.0.at="isa" hint.le.0.port="0x03d0" hint.le.0.irq="6" device oltr device ral device sbni hint.sbni.0.at="isa" hint.sbni.0.port="0x210" hint.sbni.0.irq="0xefdead" hint.sbni.0.flags="0" device snc hint.snc.0.at="isa" hint.snc.0.port="0x888" hint.snc.0.irq="6" hint.snc.0.maddr="0xc0000" device sr device ural device ath device ath_hal # Atheros HAL (includes binary component) #device ath_rate_amrr # AMRR rate control for ath driver #device ath_rate_onoe # Onoe rate control for ath driver device ath_rate_sample # SampleRate rate control for the ath driver #device wlan # 802.11 layer # # SCSI host adapters: # # ct: WD33C93[ABC] based SCSI host adapters. # ncv: NCR 53C500 based SCSI host adapters. # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. # stg: TMC 18C30, 18C50 based SCSI host adapters. device ct hint.ct.0.at="isa" device ncv device nsp device stg # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support ##################################################################### # # Miscellaneous hardware: # # apm: Laptop Advanced Power Management (experimental) # pmtimer: Timer device driver for power management events (APM or ACPI) # cy: Cyclades serial driver # digi: Digiboard driver # Notes on APM # The flags takes the following meaning for apm0: # 0x0020 Statclock is broken. device apm hint.apm.0.flags="0x20" device canbus device canbepm device cy options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared device digi # BIOS & FEP/OS components of device digi. device digi_CX device digi_CX_PCI device digi_EPCX device digi_EPCX_PCI device digi_Xe device digi_Xem device digi_Xr device olpt hint.olpt.0.at="isa" hint.olpt.0.port="0x040" device pmc hint.pmc.0.at="isa" hint.pmc.0.port="0x8f0" device pmtimer # Adjust system timer at wakeup time # # Laptop/Notebook options: # # See also: # apm under `Miscellaneous hardware' # above. # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing #--------------------------------------------------------------------------- # ISDN4BSD # # See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. # # i4b passive ISDN cards support contains the following hardware drivers: # # isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver # iwic - Winbond W6692 PCI bus ISDN S/T interface controller # ifpi - AVM Fritz!Card PCI driver # ifpi2 - AVM Fritz!Card PCI version 2 driver # ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver # ifpnp - AVM Fritz!Card PnP driver # itjc - Siemens ISAC / TJNet Tiger300/320 chipset # # i4b active ISDN cards support contains the following hardware drivers: # # iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 # # Note that the ``options'' (if given) and ``device'' lines must BOTH # be uncommented to enable support for a given card ! # # In addition to a hardware driver (and probably an option) the mandatory # ISDN protocol stack devices and the mandatory support device must be # enabled as well as one or more devices from the optional devices section. # #--------------------------------------------------------------------------- # isic driver (Siemens/Infineon chipsets) # device isic # # PCI bus Cards: # -------------- # # ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) options ELSA_QS1PCI # #--------------------------------------------------------------------------- # ifpnp driver for AVM Fritz!Card PnP # # AVM Fritz!Card PnP device ifpnp # #--------------------------------------------------------------------------- # ihfc driver for Cologne Chip ISA chipsets (experimental!) # # Teles 16.3c ISA PnP # AcerISDN P10 ISA PnP # TELEINT ISDN SPEED No.1 device ihfc # #--------------------------------------------------------------------------- # ifpi driver for AVM Fritz!Card PCI # # AVM Fritz!Card PCI device ifpi # #--------------------------------------------------------------------------- # ifpi2 driver for AVM Fritz!Card PCI version 2 # # AVM Fritz!Card PCI version 2 device ifpi2 # #--------------------------------------------------------------------------- # iwic driver for Winbond W6692 chipset # # ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) device iwic # #--------------------------------------------------------------------------- # itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset # # Traverse Technologies NETjet-S # Teles PCI-TJ device itjc # #--------------------------------------------------------------------------- # iavc driver (AVM active cards, needs i4bcapi driver!) # device iavc # #--------------------------------------------------------------------------- # ISDN Protocol Stack - mandatory for all hardware drivers # # Q.921 / layer 2 - i4b passive cards D channel handling device i4bq921 # # Q.931 / layer 3 - i4b passive cards D channel handling device i4bq931 # # layer 4 - i4b common passive and active card handling device i4b # #--------------------------------------------------------------------------- # ISDN devices - mandatory for all hardware drivers # # userland driver to do ISDN tracing (for passive cards only) device i4btrc options NI4BTRC=4 # # userland driver to control the whole thing device i4bctl # #--------------------------------------------------------------------------- # ISDN devices - optional # # userland driver for access to raw B channel device i4brbch options NI4BRBCH=4 # # userland driver for telephony device i4btel options NI4BTEL=2 # # network driver for IP over raw HDLC ISDN device i4bipr options NI4BIPR=4 # enable VJ header compression detection for ipr i/f options IPR_VJ # enable logging of the first n IP packets to isdnd (n=32 here) options IPR_LOG=32 # # network driver for sync PPP over ISDN; requires an equivalent # number of sppp device to be configured device i4bisppp options NI4BISPPP=4 # # B-channel interface to the netgraph subsystem device i4bing options NI4BING=2 # # CAPI driver needed for active ISDN cards (see iavc driver above) device i4bcapi # #--------------------------------------------------------------------------- # # Set the number of PV entries per process. Increasing this can # stop panics related to heavy use of shared memory. However, that can # (combined with large amounts of physical memory) cause panics at # boot time due the kernel running out of VM space. # # If you're tweaking this, you might also want to increase the sysctls # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". # # The value below is the one more than the default. # options PMAP_SHPGPERPROC=201 # # Change the size of the kernel virtual address space. Due to # constraints in loader(8) on i386, this must be a multiple of 4. # 256 = 1 GB of kernel address space. Increasing this also causes # a reduction of the address space in user processes. 512 splits # the 4GB cpu address space in half (2GB user, 2GB kernel). # options KVA_PAGES=260 ##################################################################### # ABI Emulation # Enable iBCS2 runtime support for SCO and ISC binaries options IBCS2 # Emulate spx device for client side of SVR3 local X interface options SPX_HACK # Enable Linux ABI emulation options COMPAT_LINUX # Enable i386 a.out binary support options COMPAT_AOUT # Enable the linux-like proc filesystem support (requires COMPAT_LINUX # and PSEUDOFS) options LINPROCFS # Enable the linux-like sys filesystem support (requires COMPAT_LINUX # and PSEUDOFS) options LINSYSFS # # SysVR4 ABI emulation # # The svr4 ABI emulator can be statically compiled into the kernel or loaded as # a KLD module. # The STREAMS network emulation code can also be compiled statically or as a # module. If loaded as a module, it must be loaded before the svr4 module # (the /usr/sbin/svr4 script does this for you). If compiling statically, # the `streams' device must be configured into any kernel which also # specifies COMPAT_SVR4. It is possible to have a statically-configured # STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 # script understands that it doesn't need to load the `streams' module under # those circumstances. # Caveat: At this time, `options KTRACE' is required for the svr4 emulator # (whether static or dynamic). # options COMPAT_SVR4 # build emulator statically options DEBUG_SVR4 # enable verbose debugging device streams # STREAMS network driver (required for svr4). ##################################################################### # VM OPTIONS # Disable the 4 MByte page PSE CPU feature. The PSE feature allows the # kernel to use 4 MByte pages to map the kernel instead of 4k pages. # This saves on the amount of memory needed for page tables needed to # map the kernel. You should only disable this feature as a temporary # workaround if you are having problems with it enabled. # #options DISABLE_PSE # Disable the global pages PGE CPU feature. The PGE feature allows pages # to be marked with the PG_G bit. TLB entries for these pages are not # flushed from the cache when %cr3 is reloaded. This can make context # switches less expensive. You should only disable this feature as a # temporary workaround if you are having problems with it enabled. # #options DISABLE_PG_G # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=3 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options FB_INSTALL_CDEV # install a CDEV entry in /dev # PECOFF module (Win32 Execution Format) options PECOFF_SUPPORT options PECOFF_DEBUG options I4B_SMP_WORKAROUND options I586_PMC_GUPROF=0x70000 options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE ##################################################################### # Devices we don't want to deal with nodevice bt nodevice adw nodevice aha nodevice ahb nodevice ahd nodevice mpt nodevice trm nodevice wds nodevice dpt nodevice ciss nodevice iir nodevice mly nodevice ida # Compaq Smart RAID nodevice mlx # Mylex DAC960 nodevice amr # AMI MegaRAID nodevice twe # 3ware ATA RAID nodevice ataraid nodevice cm nodevice ex nodevice fea nodevice intpm nodevice alpm nodevice ichsmb nodevice viapm nodevice amdpm nodevice amdsmb nodevice nfpm nodevice nfsmb ##################################################################### # Options we don't want to deal with nooption AHD_DEBUG nooption AHD_DEBUG_OPTS nooption AHD_REG_PRETTY_PRINT nooption ADW_ALLOW_MEMIO nooption DPT_LOST_IRQ nooption DPT_RESET_HBA nooption DPT_TIMEOUT_FACTOR nooption AAC_DEBUG ##################################################################### # Make options we don't want to deal with Index: head/sys/powerpc/conf/NOTES =================================================================== --- head/sys/powerpc/conf/NOTES (revision 163629) +++ head/sys/powerpc/conf/NOTES (revision 163630) @@ -1,62 +1,63 @@ # $FreeBSD$ # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on). cpu OEA options POWERMAC #NewWorld Apple PowerMacs options PSIM #GDB PSIM ppc simulator options SC_OFWFB # OFW frame buffer # Standard busses device pci device gem # Sun GEM/Sun ERI/Apple GMAC device ofwd # Open Firmware disks ##################################################################### # Devices we don't want to deal with nodevice fdc nodevice ppc +nodevice splash # when splash works enable *_saver nodevice blank_saver nodevice daemon_saver nodevice dragon_saver nodevice fade_saver nodevice fire_saver nodevice green_saver nodevice logo_saver nodevice rain_saver nodevice snake_saver nodevice star_saver nodevice warp_saver nodevice daemon_saver nodevice star_saver nodevice snake_saver # isa nodevice pcii nodevice tnt4882 # wants gdb_cur nodevice dcons nodevice dcons_crom ##################################################################### # Options we don't want to deal with nooption SMP nooption GDB nooption PPC_DEBUG nooption PPC_PROBE_CHIPSET nooption UKBD_DFLT_KEYMAP Index: head/sys/sparc64/conf/NOTES =================================================================== --- head/sys/sparc64/conf/NOTES (revision 163629) +++ head/sys/sparc64/conf/NOTES (revision 163630) @@ -1,150 +1,148 @@ # $FreeBSD$ # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # XXX: On the Sparc64, there is only one CPU type cpu SUN4U ##################################################################### # HARDWARE BUS CONFIGURATION device ebus device isa device pci device sbus device central device fhc ##################################################################### # HARDWARE DEVICE CONFIGURATION # # Mandatory devices: # device genclock # Generic clock interface device eeprom # eeprom (really a front-end for the MK48Txx) device mk48txx # Mostek MK48Txx clocks device rtc # rtc (really a front-end for the MC146818) device mc146818 # Motorola MC146818 and compatible clocks # # Optional devices: # device auxio # auxiliary I/O device device clkbrd # Clock Board (blinkenlight on Sun Exx00) device creator # Creator, Creator3D and Elite3D framebuffers device machfb # ATI Mach64 framebuffers device ofw_console # Open Firmware console device option OFWCONS_POLL_HZ=4 # 20 or more works best on Ultra2 # PS/2 mouse device psm hint.psm.0.at="atkbdc" hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=jp.106 # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads -device splash # Splash screen and screen saver support - ##################################################################### # Devices we don't want to deal with nodevice daemon_saver nodevice snake_saver nodevice star_saver nodevice bktr nodevice fdc nodevice ppc nodevice snd_ad1816 nodevice snd_als4000 nodevice snd_cmi nodevice snd_cs4281 nodevice snd_csa nodevice snd_ds1 nodevice snd_emu10k1 nodevice snd_ess nodevice snd_fm801 nodevice snd_gusc nodevice snd_ich nodevice snd_maestro nodevice snd_maestro3 nodevice snd_mss nodevice snd_neomagic nodevice snd_sb16 nodevice snd_sb8 nodevice snd_sbc nodevice snd_solo nodevice snd_t4dwave nodevice snd_via8233 nodevice snd_via82c686 nodevice snd_vibes nodevice snd_uaudio nodevice aha nodevice bt nodevice wds nodevice ep nodevice ex ##################################################################### # Options we don't want to deal with nooption FDC_DEBUG nooption SC_RENDER_DEBUG nooption SC_DEBUG_LEVEL nooption PPC_DEBUG nooption PPC_PROBE_CHIPSET nooption SC_NO_SUSPEND_VTYSWITCH nooption SC_NO_FONT_LOADING nooption SC_KERNEL_CONS_REV_ATTR nooption SC_KERNEL_CONS_ATTR nooption SC_NORM_REV_ATTR nooption SC_NORM_ATTR nooption SC_DFLT_FONT nooption SC_ALT_MOUSE_IMAGE nooption EXT2FS ##################################################################### # Make options we don't want to deal with nomakeoption SC_DFLT_FONT Index: head/sys/sun4v/conf/NOTES =================================================================== --- head/sys/sun4v/conf/NOTES (revision 163629) +++ head/sys/sun4v/conf/NOTES (revision 163630) @@ -1,135 +1,136 @@ # $FreeBSD$ # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # XXX: On the Sparc64, there is only one CPU type cpu SUN4V ##################################################################### # HARDWARE BUS CONFIGURATION device ebus #device isa device pci device sbus #device central device fhc ##################################################################### # HARDWARE DEVICE CONFIGURATION # # Mandatory devices: # device genclock # Generic clock interface device eeprom # eeprom (really a front-end for the MK48Txx) device mk48txx # Mostek MK48Txx clocks #device rtc # rtc (really a front-end for the MC146818) device mc146818 # Motorola MC146818 and compatible clocks # # Optional devices: # #device auxio # auxiliary I/O device #device clkbrd # Clock Board (blinkenlight on Sun Exx00) #device creator # Creator, Creator3D and Elite3D framebuffers #device machfb # ATI Mach64 framebuffers device ofw_console # Open Firmware console device option OFWCONS_POLL_HZ=4 # 20 or more works best on Ultra2 #device sab # Siemens SAB82532 based serial ports ##################################################################### # Devices we don't want to deal with nodevice aha nodevice bktr nodevice blank_saver nodevice bt nodevice daemon_saver nodevice dpt nodevice dragon_saver nodevice ep nodevice ex nodevice fade_saver nodevice fdc nodevice fire_saver nodevice green_saver nodevice hwpmc nodevice logo_saver nodevice pcii nodevice ppc nodevice rain_saver nodevice sc nodevice si nodevice snake_saver nodevice snd_ad1816 nodevice snd_als4000 nodevice snd_cmi nodevice snd_cs4281 nodevice snd_csa nodevice snd_ds1 nodevice snd_emu10k1 nodevice snd_ess nodevice snd_fm801 nodevice snd_gusc nodevice snd_ich nodevice snd_maestro nodevice snd_maestro3 nodevice snd_mss nodevice snd_neomagic nodevice snd_sb16 nodevice snd_sb8 nodevice snd_sbc nodevice snd_solo nodevice snd_t4dwave nodevice snd_uaudio nodevice snd_via8233 nodevice snd_via82c686 nodevice snd_vibes +nodevice splash nodevice star_saver nodevice tnt4882 nodevice uart nodevice ukbd nodevice warp_saver nodevice wds ##################################################################### # Options we don't want to deal with nooption FDC_DEBUG nooption SC_RENDER_DEBUG nooption SC_DEBUG_LEVEL nooption PPC_DEBUG nooption PPC_PROBE_CHIPSET nooption SC_NO_SUSPEND_VTYSWITCH nooption SC_NO_FONT_LOADING nooption SC_KERNEL_CONS_REV_ATTR nooption SC_KERNEL_CONS_ATTR nooption SC_NORM_REV_ATTR nooption SC_NORM_ATTR nooption SC_DFLT_FONT nooption SC_ALT_MOUSE_IMAGE nooption EXT2FS ##################################################################### # Make options we don't want to deal with nomakeoption SC_DFLT_FONT