Index: head/sys/amd64/conf/GENERIC =================================================================== --- head/sys/amd64/conf/GENERIC (revision 159963) +++ head/sys/amd64/conf/GENERIC (revision 159964) @@ -1,288 +1,287 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/amd64 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu HAMMER ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler #options SCHED_CORE # CORE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options NTFS # NT File System options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_IA32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI -#options COMMONID # Enable support for common UID/GID space # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # Linux 32-bit ABI support options COMPAT_LINUX32 # Compatible with i386 linux binaries options LINPROCFS # Cannot be a module yet. options LINSYSFS # Bus support. device acpi device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. device ahd # AHA39320/29320 and onboard AIC79xx devices options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options device hptmv # Highpoint RocketRAID 182x device rr232x # Highpoint RocketRAID 232x device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family #XXX pointer/int warnings #device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit Ethernet device nge # NatSemi DP83820 gigabit Ethernet device nve # nVidia nForce MCP on-board Ethernet Networking device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath device awi # BayStack 660 and others device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) Index: head/sys/conf/NOTES =================================================================== --- head/sys/conf/NOTES (revision 159963) +++ head/sys/conf/NOTES (revision 159964) @@ -1,2694 +1,2630 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc builtin functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # Options for the VM subsystem # Deprecated options supported for backwards compatibility #options PQ_NOOPT # No coloring # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings -n 3 /boot/kernel/kernel | sed -n 's/^___//p' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel options GEOM_AES # Don't use, use GEOM_BDE options GEOM_APPLE # Apple partitioning options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation options GEOM_GATE # Userland services. options GEOM_GPT # GPT partitioning options GEOM_LABEL # Providers labelization. options GEOM_MBR # DOS/MBR partitioning options GEOM_MIRROR # Disk mirroring. options GEOM_NOP # Test class. options GEOM_PC98 # NEC PC9800 partitioning options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning options GEOM_UZIP # Read-only compressed disks options GEOM_VOL # Volume names from UFS superblock options GEOM_ZERO # Peformance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no cpu affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE is a new scheduler that has been designed for SMP and has some # advantages for UP as well. It is intended to replace the 4BSD scheduler # over time. # options SCHED_4BSD #options SCHED_CORE #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behaviour is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_GIANT causes the Giant lock to also be made adaptive when # running without NO_ADAPTIVE_MUTEXES. Normally, because Giant is assumed # to be held for extended periods, contention on Giant will cause a thread # to sleep rather than spinning. options ADAPTIVE_GIANT # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # MUTEX_WAKE_ALL changes the mutex unlock algorithm to wake all waiters # when a contested mutex is released rather than just awaking the highest # priority waiter. options MUTEX_WAKE_ALL # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SMP Debugging Options: # # PREEMPTION allows the threads that are in the kernel to be preempted # by higher priority threads. It helps with interactivity and # allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # MUTEX_DEBUG enables various extra assertions in the mutex code. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options MUTEX_DEBUG options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # MUTEX_PROFILING - Profiling mutual exclusion locks (mutexes). See # MUTEX_PROFILING(9) for details. options MUTEX_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose consol output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing mechanism imported from BSD/OS. Currently # it has no userland interface aside from a few sysctl's. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it must be a power of two. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to cpu X. KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. # options KTR options KTR_ENTRIES=1024 options KTR_COMPILE=(KTR_INTR|KTR_PROC) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facilty for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as KTR(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # RESTARTABLE_PANICS allows one to continue from a panic as if it were # a call to the debugger to continue from a panic as instead. It is only # useful if a kernel debugger is present. To restart from a panic, reset # the panicstr variable to NULL and continue execution. This option is # for development use only and should NOT be used in production systems # to "workaround" a panic. # #options RESTARTABLE_PANICS # # This option let some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families: # Only the INET (Internet) family is officially supported in FreeBSD. # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options IPSEC #IP security options IPSEC_ESP #IP security (crypto; define w/ IPSEC) options IPSEC_DEBUG #debug for IP security # # Set IPSEC_FILTERGIF to force packets coming through a gif tunnel # to be processed by any configured packet filtering (ipfw, ipf). # The default is that packets coming from a tunnel are _not_ processed; # they are assumed trusted. # # IPSEC history is preserved for such packets, and can be filtered # using ipfw(8)'s 'ipsec' keyword, when this option is enabled. # #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel #options FAST_IPSEC #new IPsec (cannot define w/ IPSEC) options IPX #IPX/SPX communications protocols options IPXIP #IPX in IP encapsulation (not available) options NCP #NetWare Core protocol options NETATALK #Appletalk communications protocols options NETATALKDEBUG #Appletalk debugging # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Bases Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_H4 # ng_h4(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CISCO options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FEC options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI # MPPC compression requires proprietary files (not included) #options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_TTY options NETGRAPH_UI options NETGRAPH_VJC # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured or token-ring is enabled. # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. It requires `device miibus'. # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # ath, and awi drivers and will eventually be required by all 802.11 drivers. # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The `fddi' device provides generic code to support FDDI. # The `arcnet' device provides generic code to support Arcnet. # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). # The `sl' device implements the Serial Line IP (SLIP) service. # The `ppp' device implements the Point-to-Point Protocol. # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. DHCP requires bpf. # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing purposes. This shows up as the `ds' interface. # The `tap' device is a pty-like virtual Ethernet interface # The `tun' device implements (user-)ppp and nos-tun # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements two types of IP4 over IP4 tunneling: # GRE and MOBILE, as specified in the RFC1701 and RFC2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. # The `faith' device captures packets sent to it and diverts them # to the IPv4/IPv6 translation daemon. # The `stf' device implements 6to4 encapsulation. # The `ef' device provides support for multiple ethernet frame types # specified via ETHER_* options. See ef(4) for details. # # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). # # The PPP_BSDCOMP option enables support for compress(1) style entire # packet compression, the PPP_DEFLATE is for zlib/gzip style compression. # PPP_FILTER enables code for filtering the ppp data stream and selecting # events for resetting the demand dial activity timer - requires bpf. # See pppd(8) for more details. # device ether #Generic Ethernet device vlan #VLAN support (needs miibus) device wlan #802.11 support device wlan_wep #802.11 WEP support device wlan_ccmp #802.11 CCMP support device wlan_tkip #802.11 TKIP support device wlan_xauth #802.11 external authenticator support device wlan_acl #802.11 MAC ACL support device token #Generic TokenRing device fddi #Generic FDDI device arcnet #Generic Arcnet device sppp #Generic Synchronous PPP device loop #Network loopback device device bpf #Berkeley packet filter device disc #Discard device (ds0, ds1, etc) device tap #Virtual Ethernet driver device tun #Tunnel driver (ppp(8), nos-tun(8)) device sl #Serial Line IP device gre #IP over IP tunneling device if_bridge #Bridge interface device pf #PF OpenBSD packet-filter firewall device pflog #logging support interface for PF device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device ppp #Point-to-point protocol options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpf) device ef # Multiple ethernet frames support options ETHER_II # enable Ethernet_II frame options ETHER_8023 # enable Ethernet_802.3 (Novell) frame options ETHER_8022 # enable Ethernet_802.2 frame options ETHER_SNAP # enable Ethernet_802.2/SNAP frame # for IPv6 device gif #IPv6 and IPv4 tunneling options XBONEHACK device faith #for IPv6 and IPv4 translation device stf #6to4 IPv6 over IPv4 encapsulation # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted(8). # # PIM enables Protocol Independent Multicast in the kernel. # Requires MROUTING enabled. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_FORWARD enables changing of the packet destination either # to do some sort of policy routing or transparent proxying. Used by # ``ipfw forward''. # # IPFIREWALL_FORWARD_EXTENDED enables full packet destination changing # including redirecting packets to local IP addresses and ports. All # redirections apply to locally generated packets too. Because of this # great care is required when crafting the ruleset. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the ttl). This can be useful to hide firewalls # from traceroute and similar tools. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # options MROUTING # Multicast routing options PIM # Protocol Independent Multicast options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_FORWARD #packet destination changes options IPFIREWALL_FORWARD_EXTENDED #all packet dest changes options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options TCPDEBUG # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. options MBUF_STRESS_TEST # Statically Link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_HTTP # TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This # prevents nmap et al. from identifying the TCP/IP stack, but breaks support # for RFC1644 extensions and is not recommended for web servers. # options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto', 'options FAST_IPSEC' or 'options # IPSEC', and 'device cryptodev'. #options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have "options HZ=1000" to achieve a # smoother scheduling of the traffic. options DUMMYNET # Zero copy sockets support. This enables "zero copy" for sending and # receiving data via a socket. The send side works for any type of NIC, # the receive side only works for NICs that support MTUs greater than the # page size of your architecture and that support header splitting. See # zero_copy(9) for more details. options ZERO_COPY_SOCKETS # # ATM (HARP version) options # # ATM_CORE includes the base ATM functionality code. This must be included # for ATM support. # # ATM_IP includes support for running IP over ATM. # # At least one (and usually only one) of the following signalling managers # must be included (note that all signalling managers include PVC support): # ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'. # ATM_SPANS includes support for the `spans' signalling manager, which runs # the FORE Systems's proprietary SPANS signalling protocol. # ATM_UNI includes support for the `uni30' and `uni31' signalling managers, # which run the ATM Forum UNI 3.x signalling protocols. # # The `hfa' driver provides support for the FORE Systems, Inc. # PCA-200E ATM PCI Adapter. # # The `harp' pseudo-driver makes all NATM interface drivers available to HARP. # options ATM_CORE #core ATM protocol family options ATM_IP #IP over ATM support options ATM_SIGPVC #SIGPVC signalling manager options ATM_SPANS #SPANS signalling manager options ATM_UNI #UNI signalling manager device hfa #FORE PCA-200E ATM PCI device harp #Pseudo-interface for NATM ##################################################################### # FILESYSTEM OPTIONS # # Only the root, /usr, and /tmp filesystems need be statically # compiled; everything else will be automatically loaded at mount # time. (Exception: the UFS family--- FFS --- cannot # currently be demand-loaded.) Some people still prefer to statically # compile other filesystems as well. # # NB: The NULL, PORTAL, UMAP and UNION filesystems are known to be # buggy, and WILL panic your system if you attempt to do anything with # them. They are included here as an incentive for some enterprising # soul to sit down and fix them. # # One of these is mandatory: options FFS #Fast filesystem options NFSCLIENT #Network File System client # The rest are optional: options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options HPFS #OS/2 File system options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSSERVER #Network File System server options NTFS #NT File System options NULLFS #NULL filesystem # Broken (depends on NCP): #options NWFS #NetWare filesystem options PORTALFS #Portal filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options UDF #Universal Disk Format # Broken (seriously (functionally) broken): #options UMAPFS #UID map filesystem options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA or Netatalk, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1) PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR -# The common user and group ID space for the local filesystems -# (see PR kern/14584), AKA "poor man's ACLs". -# -# From the systems administration standpoint ACLs are a pain to use: -# * they are not supported by the classic file formats like tar and cpio -# * they need lots of ugly flags to commands like chown or ls -# * they are just by themselves difficult to show in ls -# * they promote ad-hoc and messy assignment of permissions -# -# But in fact the classic Unix permissions seem to have only one real problem: -# sometimes it's neccessary to give read permissions to one group of -# users and read-write permissions to another group of users. But only -# one group is supported and that makes a problem. The common ID -# support solves this problem without breaking any compatibility. -# -# Controlled by the sysctl: -# vfs.commonid.local.enabled: Enable common UID/GID space for local filesystems -# vfs.commonid.local.low: Lowest common UID/GID value for local filesystems -# vfs.commonid.local.high: Highest common UID/GID value for local filesystems -# -# When enabled, the user and group ID space in the range [low, high] -# becomes common. That is, if there is an user with some ID in this range, -# there must not be a group with the same ID (except for a special case -# described later). Traditionally this kind of overlapping exists in the -# low values of system IDs, so the implementation won't allow to set the -# low border below 100. If it's set manually below 100, the first time -# an access check is done, the system will reset it to 100. -# -# The special case is that for the symbolic group and user names to work -# correctly, every time a user is created, a pseudo-group with the same -# ID and name must be created. And the other way around - every time -# a group is created, a pseudo-user with the same name and ID must be created. -# Otherwise command like "ls" won't show the user/group names correctly -# and command like "chown" won't understand the symbolic names correctly. -# -# The IDs in the common range can be used interchangeably in both the -# user and group fields of file permissions. For example, if you have -# groups group1 and group2 with IDs in the common range, you can do: -# chmod 240 file -# chown group1:group2 file -# This would allow the group1 to write to the file and group2 to read -# the file. -# -# This semantics works only for the access but not for modification of -# the permissions. In the example above the members of group1 aren't allowed -# to call chmod on the file. Such changes must be done either by root -# or through the pseudo-user group1. -# -# If it's desiable to give the "owner group" of some files (like group1 -# in this example) the rights to change the permissions of all the files -# it owns, it can be achieved through cloning the chmod binary and -# adding the pseudo-user setuid rights to it: -# cp /bin/chmod /usr/local/bin/group1chmod -# chown group1 /usr/local/bin/group1chmod -# chmod u=xs,g=,o= /usr/local/bin/group1chmod -# A similar thing can be done for chown. -# In result all the members of group1 would be able to execute group1chmod, -# which would assume the ID of pseudo-user "group1" and will be able -# to change the file permissions. -# -# This logic does not work on the remote filesystems (such as NFS). - -options COMMONID # Enable support for common UID/GID space - # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_GATHERDELAY=10 # Default write gather delay (msec) options NFS_WDELAYHASHSIZ=16 # and with this options NFS_DEBUG # Enable NFS Debugging # Coda stuff: options CODA #CODA filesystem. device vcoda #coda minicache <-> venus comm. # Use the old Coda 5.x venus<->kernel interface instead of the new # realms-aware 6.x protocol. #options CODA_COMPAT_5 # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # # Add support for the ReiserFS filesystem (used in Linux). Currently, # this is limited to read-only access. # options REISERFS # # Add support for the SGI XFS filesystem. Currently, # this is limited to read-only access. # options XFS # Use real implementations of the aio_* system calls. There are numerous # stability and security issues in the current aio code that make it # unsuitable for inclusion on machines with untrusted local users. options VFS_AIO # Cryptographically secure random number generator; /dev/random device random # The system memory devices; /dev/mem, /dev/kmem device mem # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options NTFS_ICONV options UDF_ICONV # Experimental support for large MS-DOS filesystems. # # WARNING: This uses at least 32 bytes of kernel memory (which is not # reclaimed until the FS is unmounted) for each file on disk to map # between the 32-bit inode numbers used by VFS and the 64-bit pseudo-inode # numbers used internally by msdosfs. This is only safe to use in certain # controlled situations (e.g. read-only FS with less than 1 million files). # Since the mappings do not persist across unmounts (or reboots), these # filesystems are not suitable for exporting through NFS, or any other # application that requires fixed inode numbers. options MSDOSFS_LARGE ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 Posix # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_DEBUG options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (100) means a granularity of 10ms (1s/HZ). # Some subsystems, such as DUMMYNET, might benefit from a smaller # granularity such as 1ms or less, for a smoother scheduling of packets. # Consider, however, that reducing the granularity too much might # cause excessive overhead in clock interrupt processing, # potentially causing ticks to be missed and thus actually reducing # the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration as the "pass" driver. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #SCSI Environmental Services (and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver # CAM OPTIONS: # debugging options: # -- NOTE -- If you specify one of the bus/target/lun options, you must # specify them all! # CAMDEBUG: When defined enables debugging macros # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses. # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets. # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns. # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE, # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # CAM_NEW_TRAN_CODE: this is the new transport layer code that will be switched # to soon # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB) options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # build a topology with the SES device that's on the box these drives # are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # The `pty' device usually turns out to be ``effectively mandatory'', # as it is required for `telnetd', `rlogind', `screen', `emacs', and # `xterm', among others. device pty #Pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 # Maximum size of a tty or pty input buffer. options TTYHOG=8193 ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # EISA, MCA, PCI and pccard are self identifying buses, so no hints # are needed. # # Mandatory devices: # # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=jp.106 # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # PS/2 mouse device psm hint.psm.0.at="atkbdc" hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # Video card driver for VGA adapters. device vga hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (sco color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behaviour of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # # Optional devices: # # # SCSI host adapters: # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. # aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices # such as the Tekram DC-390(T). # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # esp: NCR53c9x. Only for SBUS hardware right now. # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. # wds: WD7000 # # Note that the order is important in order for Buslogic ISA/EISA cards to be # probed correctly. # device bt hint.bt.0.at="isa" hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw device aha hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb device ahc device ahd device amd device esp device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpt device ncr device sym device trm device wds hint.wds.0.at="isa" hint.wds.0.port="0x350" hint.wds.0.irq="11" hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # The adw driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. options ADW_ALLOW_MEMIO # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role (none, target, init, both) # options ISP_DEFAULT_ROLES=3 # Options used in dev/sym/ (Symbios SCSI driver). #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. # The DPT controllers are commonly re-licensed under other brand-names - # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and # Compaq are actually DPT controllers. # # See src/sys/dev/dpt for debugging and other subtle options. # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various # instruments are enabled. The tools in # /usr/sbin/dpt_* assume these to be enabled. # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT. # If you ant the driver to handle timeouts, enable # this option. If your system is very busy, this # option will create more trouble than solve. # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to # wait when timing out with the above option. # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h # DPT_LOST_IRQ When enabled, will try, once per second, to catch # any interrupt that got lost. Seems to help in some # DPT-firmware/Motherboard combinations. Minimal # cost, great benefit. # DPT_RESET_HBA Make "reset" actually reset the controller # instead of fudging it. Only enable this if you # are 100% certain you need it. device dpt # DPT options #!CAM# options DPT_MEASURE_PERFORMANCE #!CAM# options DPT_HANDLE_TIMEOUTS options DPT_TIMEOUT_FACTOR=4 options DPT_LOST_IRQ options DPT_RESET_HBA # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device mfi # LSI MegaRAID SAS # # 3ware ATA RAID # device twe # 3ware ATA RAID # # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM # needs CAM to be present (scbus & pass) # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # The following options are valid on the ATA driver: # # ATA_STATIC_ID: controller numbering is static ie depends on location # else the device numbers are dynamically allocated. options ATA_STATIC_ID # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # sio: serial ports (see sio(4)), including support for various # PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf) # device sio hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" # Options for sio: options COM_ESP # Code for Hayes ESP. options COM_MULTIPORT # Code for some cards with shared IRQs. options CONSPEED=115200 # Speed for serial console # (default 9600). # `flags' specific to sio(4). See below for flags used by both sio(4) and # uart(4). # 0x20 force this unit to be the console (unless there is another # higher priority console). This replaces the COMCONSOLE option. # 0x40 reserve this unit for low level console operations. Do not # access the device in any normal way. # PnP `flags' # 0x1 disable probing of this device. Used to prevent your modem # from being attached as a PnP modem. # Other flags for sio that aren't documented in the man page. # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for # ST16650A-compatible UARTs. # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for some PCI 10/100 ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus0" to the kernel config pulls in support for # the generic miibus API and all of the PHY drivers, including a # generic one for PHYs that aren't specifically handled by an # individual driver. device miibus # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # awi: Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and # Harris (Intersil) Chipset with PCnetMobile firmware by AMD. # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # cm: Arcnet SMC COM90c26 / SMC COM90c56 # (and SMC COM90c66 in '56 compatibility mode) adapters. # cnw: Xircom CNW/Netware Airsurfer PC Card adapter # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # de: Digital Equipment DC21040 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 # and PC Card devices using these chipsets. # ex: Intel EtherExpress Pro/10 and other i82595-based adapters, # Olicom Ethernet PC Card devices. # fe: Fujitsu MB86960A/MB86965A Ethernet # fea: DEC DEFEA EISA FDDI adapter # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # hme: Sun HME (Happy Meal Ethernet) # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lmc: Support for the LMC/SBE wide-area network interface cards. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home # chipsets. These can also be handled by the le(4) driver if the # pcn(4) driver is left out of the kernel. The le(4) driver does not # support the additional features like the MII bus and burst mode of # the PCnet-FAST and greater chipsets though. # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the # Adaptec AIC-6915 "starfire" controller. # This includes dual and quad port cards, as well as one 100baseFX card. # Most of these are 64-bit PCI devices, except for one single port # card which is 32-bit. # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sbsh: Support for Granch SBNI16 SHDSL modem PCI adapters # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # sn: Support for ISA and PC Card Ethernet devices using the # SMC91C90/92/94/95 chips. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up NMBCLUSTERS a lot to use this driver. # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' # cards and integrated ethernet controllers. This includes several # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking # Technologies PN102TX, and the AOpen/Acer ALN-320. # vx: 3Com 3C590 and 3C595 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. # Note: this is not the same as the Winbond W89C940F, which is a # NE2000 clone. # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA/EISA devices is important here device cm hint.cm.0.at="isa" hint.cm.0.port="0x2e0" hint.cm.0.irq="9" hint.cm.0.maddr="0xdc000" device ep device ex device fe hint.fe.0.at="isa" hint.fe.0.port="0x300" device fea device sn hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" device an device awi device cnw device wi device xe # PCI Ethernet NICs that use the common MII bus controller code. device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device hme # Sun HME (Happy Meal Ethernet) device lge # Level 1 LXT1001 gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device rl # RealTek 8129/8139 device pcn # AMD Am79C97x PCI 10/100 NICs device sf # Adaptec AIC-6915 (``Starfire'') device sbsh # Granch SBNI16 SHDSL modem device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI FDDI NICs. device fpa # PCI WAN adapters. device lmc # Use "private" jumbo buffers allocated exclusively for the ti(4) driver. # This option is incompatible with the TI_JUMBO_HDRSPLIT option below. #options TI_PRIVATE_JUMBOS # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # ATM related options (Cranor version) # (note: this driver cannot be used with the HARP ATM stack) # # The `en' device provides support for Efficient Networks (ENI) # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0). # # The `hatm' device provides support for Fore/Marconi HE155 and HE622 # ATM PCI cards. # # The `fatm' device provides support for Fore PCA200E ATM PCI cards. # # The `patm' device provides support for IDT77252 based cards like # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards. # # atm device provides generic atm functions and is required for # atm devices. # NATM enables the netnatm protocol family that can be used to # bypass TCP/IP. # # utopia provides the access to the ATM PHY chips and is required for en, # hatm and fatm. # # the current driver supports only PVC operations (no atm-arp, no multicast). # for more details, please read the original documents at # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html # device atm device en device fatm #Fore PCA200E device hatm #Fore/Marconi HE155/622 device patm #IDT77252 cards (ProATM and IDT) device utopia #ATM PHY driver options NATM #native ATM options LIBMBPOOL #needed by patm, iatm # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tells the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_au88x0 Aureal Vortex 1/2/Advantage PCI. This driver # lacks support for playback and recording. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_ich: Intel ICH PCI and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjuction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjuction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_solo: ESS Solo-1x PCI. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. # snd_uaudio: USB audio. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_au88x0 #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_t4dwave device snd_via8233 device snd_via82c686 device snd_vibes device snd_uaudio # For non-pnp sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # IEEE-488 hardware: # pcii: PCIIA cards (uPD7210 based isa cards) # tnt4882: National Instruments PCI-GPIB card. device pcii hint.pcii.0.at="isa" hint.pcii.0.port="0x2e1" hint.pcii.0.irq="5" hint.pcii.0.drq="1" device tnt4882 # # Miscellaneous hardware: # # scd: Sony CD-ROM using proprietary (non-ATAPI) interface # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # cy: Cyclades serial driver # joy: joystick (including IO DATA PCJOY PC Card joystick) # rc: RISCom/8 multiport card # rp: Comtrol Rocketport(ISA/PCI) - single card # si: Specialix SI/XIO 4-32 port terminal multiplexor # nmdm: nullmodem terminal driver (see nmdm(4)) # Notes on the Comtrol Rocketport driver: # # The exact values used for rp0 depend on how many boards you have # in the system. The manufacturer's sample configs are listed as: # # device rp # core driver support # # Comtrol Rocketport ISA single card # hint.rp.0.at="isa" # hint.rp.0.port="0x280" # # If instead you have two ISA cards, one installed at 0x100 and the # second installed at 0x180, then you should add the following to # your kernel probe hints: # hint.rp.0.at="isa" # hint.rp.0.port="0x100" # hint.rp.1.at="isa" # hint.rp.1.port="0x180" # # For 4 ISA cards, it might be something like this: # hint.rp.0.at="isa" # hint.rp.0.port="0x180" # hint.rp.1.at="isa" # hint.rp.1.port="0x100" # hint.rp.2.at="isa" # hint.rp.2.port="0x340" # hint.rp.3.at="isa" # hint.rp.3.port="0x240" # # For PCI cards, you need no hints. # Mitsumi CD-ROM device mcd hint.mcd.0.at="isa" hint.mcd.0.port="0x300" # for the Sony CDU31/33A CDROM device scd hint.scd.0.at="isa" hint.scd.0.port="0x230" device joy # PnP aware, hints for nonpnp only hint.joy.0.at="isa" hint.joy.0.port="0x201" device rc hint.rc.0.at="isa" hint.rc.0.port="0x220" hint.rc.0.irq="12" device rp hint.rp.0.at="isa" hint.rp.0.port="0x280" device si options SI_DEBUG hint.si.0.at="isa" hint.si.0.maddr="0xd0000" hint.si.0.irq="12" device nmdm # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35Mhz) boards where PAL is used # to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enable IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # pccbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device smb # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCLIENT and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP # # Add software watchdog routines. # options SW_WATCHDOG # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctls "vm.defer_swapspace_pageouts" and # "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and change a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Also note # that it is likely to break e.g. fstat(1) unless you recompile your # userland with -DDEBUG_LOCKS as well. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # SL811 Controller device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # Generic USB device driver device ugen # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB Iomega Zip 100 Drive (Requires scbus and da) device umass # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # Diamond Rio 500 Mp3 player device urio # USB scanners device uscanner # # USB serial support device ucom # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for BWCT console serial adapters device ubser # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for Prolific PL-2303 serial adapters device uplcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # debugging options for the USB subsystem # options USB_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=it.iso # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (rfc2734 and rfc3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the openbsd crypto framework. Include this when # configuring FAST_IPSEC and when you have a h/w crypto device to accelerate # user applications that link to openssl. # # Drivers are ports from openbsd with some simple enhancements that have # been fed back to openbsd. device crypto # core crypto support device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/stand/sysinstall # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable vfs lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of entries in a semaphore map. options SEMMAP=31 # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options NMBCLUSTERS=1024 # Number of mbuf clusters options SCSI_NCR_DEBUG options SCSI_NCR_MAX_SYNC=10000 options SCSI_NCR_MAX_WIDE=1 options SCSI_NCR_MYADDR=7 options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options SHOW_BUSYBUFS # List buffers that prevent root unmount options SLIP_IFF_OPTS options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 options NDEVFSINO=1025 options NDEVFSOVERFLOW=32769 # Yet more undocumented options for linting. options VGA_DEBUG Index: head/sys/conf/options =================================================================== --- head/sys/conf/options (revision 159963) +++ head/sys/conf/options (revision 159964) @@ -1,726 +1,725 @@ # $FreeBSD$ # # On the handling of kernel options # # All kernel options should be listed in NOTES, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT (generated from NOTES) should # compile as much code as possible. Try to structure option-using # code so that a single option only switch code on, or only switch # code off, to make it possible to have a full compile-test. If # necessary, you can check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "conf/options.". Options that affect a single source-file # .[c|s] should be directed into "opt_.h", while options # that affect multiple files should either go in "opt_global.h" if # this is a kernel-wide option (used just about everywhere), or in # "opt_.h" if it affect only some files. # Note that the effect of listing only an option without a # header-file-name in conf/options (and cousins) is that the last # convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h AAC_DEBUG opt_aac.h AHC_ALLOW_MEMIO opt_aic7xxx.h AHC_TMODE_ENABLE opt_aic7xxx.h AHC_DUMP_EEPROM opt_aic7xxx.h AHC_DEBUG opt_aic7xxx.h AHC_DEBUG_OPTS opt_aic7xxx.h AHC_REG_PRETTY_PRINT opt_aic7xxx.h AHD_DEBUG opt_aic79xx.h AHD_DEBUG_OPTS opt_aic79xx.h AHD_TMODE_ENABLE opt_aic79xx.h AHD_REG_PRETTY_PRINT opt_aic79xx.h ADW_ALLOW_MEMIO opt_adw.h TWA_DEBUG opt_twa.h TWA_FLASH_FIRMWARE opt_twa.h # Debugging options. DDB DDB_NUMSYM opt_ddb.h GDB GDBSPEED opt_gdb.h KDB opt_global.h KDB_TRACE opt_kdb.h KDB_UNATTENDED opt_kdb.h SYSCTL_DEBUG opt_sysctl.h # Miscellaneous options. ADAPTIVE_GIANT opt_adaptive_mutexes.h NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h ALQ AUDIT opt_global.h CODA_COMPAT_5 opt_coda.h COMPAT_43 opt_compat.h COMPAT_43TTY opt_compat.h COMPAT_FREEBSD4 opt_compat.h COMPAT_FREEBSD5 opt_compat.h COMPILING_LINT opt_global.h CONSPEED opt_comconsole.h CY_PCI_FASTINTR DIRECTIO FULL_PREEMPTION opt_sched.h IPI_PREEMPTION opt_sched.h GEOM_AES opt_geom.h GEOM_APPLE opt_geom.h GEOM_BDE opt_geom.h GEOM_BSD opt_geom.h GEOM_CONCAT opt_geom.h GEOM_ELI opt_geom.h GEOM_FOX opt_geom.h GEOM_GATE opt_geom.h GEOM_GPT opt_geom.h GEOM_LABEL opt_geom.h GEOM_MBR opt_geom.h GEOM_MIRROR opt_geom.h GEOM_NOP opt_geom.h GEOM_PC98 opt_geom.h GEOM_RAID3 opt_geom.h GEOM_SHSEC opt_geom.h GEOM_STRIPE opt_geom.h GEOM_SUNLABEL opt_geom.h GEOM_UZIP opt_geom.h GEOM_VOL opt_geom.h GEOM_ZERO opt_geom.h KSTACK_MAX_PAGES KSTACK_PAGES KTRACE KTRACE_REQUEST_POOL opt_ktrace.h LIBICONV MAC MAC_ALWAYS_LABEL_MBUF opt_mac.h MAC_BIBA opt_dontuse.h MAC_BSDEXTENDED opt_dontuse.h MAC_DEBUG opt_mac.h MAC_IFOFF opt_dontuse.h MAC_LOMAC opt_dontuse.h MAC_MLS opt_dontuse.h MAC_NONE opt_dontuse.h MAC_PARTITION opt_dontuse.h MAC_PORTACL opt_dontuse.h MAC_SEEOTHERUIDS opt_dontuse.h MAC_STATIC opt_mac.h MAC_STUB opt_dontuse.h MAC_TEST opt_dontuse.h MD_ROOT opt_md.h MD_ROOT_SIZE opt_md.h MFI_DEBUG opt_mfi.h MFI_DECODE_LOG opt_mfi.h MPROF_BUFFERS opt_mprof.h MPROF_HASH_SIZE opt_mprof.h MUTEX_WAKE_ALL NSWBUF_MIN opt_swap.h PANIC_REBOOT_WAIT_TIME opt_panic.h PPC_DEBUG opt_ppc.h PPC_PROBE_CHIPSET opt_ppc.h PPS_SYNC opt_ntp.h PREEMPTION opt_sched.h QUOTA SCHED_4BSD opt_sched.h SCHED_CORE opt_sched.h SCHED_ULE opt_sched.h SHOW_BUSYBUFS SLEEPQUEUE_PROFILING SLHCI_DEBUG opt_slhci.h SPX_HACK SUIDDIR MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h SEMMAP opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h SHMALL opt_sysvipc.h SHMMAX opt_sysvipc.h SHMMAXPGS opt_sysvipc.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SYSVMSG opt_sysvipc.h SYSVSEM opt_sysvipc.h SYSVSHM opt_sysvipc.h SW_WATCHDOG opt_watchdog.h TURNSTILE_PROFILING TTYHOG opt_tty.h VFS_AIO VERBOSE_SYSINIT opt_global.h WLCACHE opt_wavelan.h WLDEBUG opt_wavelan.h -COMMONID opt_commonid.h # POSIX kernel options P1003_1B_MQUEUE opt_posix.h P1003_1B_SEMAPHORES opt_posix.h _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static filesystems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. CD9660 opt_dontuse.h CODA opt_dontuse.h EXT2FS opt_dontuse.h FDESCFS opt_dontuse.h HPFS opt_dontuse.h MSDOSFS opt_dontuse.h NTFS opt_dontuse.h NULLFS opt_dontuse.h NWFS opt_dontuse.h PORTALFS opt_dontuse.h PROCFS opt_dontuse.h PSEUDOFS opt_dontuse.h REISERFS opt_dontuse.h SMBFS opt_dontuse.h UDF opt_dontuse.h UMAPFS opt_dontuse.h UNIONFS opt_dontuse.h # Pseudofs debugging PSEUDOFS_TRACE opt_pseudofs.h # Broken - ffs_snapshot() dependency from ufs_lookup() :-( FFS opt_ffs_broken_fixme.h # These static filesystems have one slightly bogus static dependency in # sys/i386/i386/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. NFSCLIENT opt_nfs.h NFSSERVER opt_nfs.h # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h NTFS_ICONV opt_dontuse.h UDF_ICONV opt_dontuse.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of thigs # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # On small, embedded systems, it can be useful to turn off support for # snapshots. It saves about 30-40k for a feature that would be lightly # used, if it is used at all. NO_FFS_SNAPSHOT opt_ffs.h # Enabling this option turns on support for Access Control Lists in UFS, # which can be used to support high security configurations. Depends on # UFS_EXTATTR. UFS_ACL opt_ufs.h # Enabling this option turns on support for extended attributes in UFS-based # filesystems, which can be used to support high security configurations # as well as new filesystem features. UFS_EXTATTR opt_ufs.h UFS_EXTATTR_AUTOSTART opt_ufs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # The below sentence is not in English, and neither is this one. # We plan to remove the static dependences above, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # SMB/CIFS requester NETSMB opt_netsmb.h # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"! MSDOSFS_LARGE opt_msdosfs.h # Options used only in subr_param.c. HZ opt_param.h MAXFILES opt_param.h NBUF opt_param.h NMBCLUSTERS opt_param.h NSFBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h CAM_NEW_TRAN_CODE opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in pci/ncr.c SCSI_NCR_DEBUG opt_ncr.h SCSI_NCR_MAX_SYNC opt_ncr.h SCSI_NCR_MAX_WIDE opt_ncr.h SCSI_NCR_MYADDR opt_ncr.h # Options used only in dev/isp/* ISP_TARGET_MODE opt_isp.h ISP_FW_CRASH_DUMP opt_isp.h ISP_DEFAULT_ROLES opt_isp.h # Options used in the 'ata' ATA/ATAPI driver ATA_STATIC_ID opt_ata.h ATA_NOPCI opt_ata.h # Net stuff. ACCEPT_FILTER_DATA ACCEPT_FILTER_HTTP ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_CDNR opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_DEBUG opt_altq.h BOOTP opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_NFSV3 opt_bootp.h BOOTP_WIRED_TO opt_bootp.h DEVICE_POLLING DEV_PF opt_pf.h DEV_PFLOG opt_pf.h DEV_PFSYNC opt_pf.h ETHER_II opt_ef.h ETHER_8023 opt_ef.h ETHER_8022 opt_ef.h ETHER_SNAP opt_ef.h MROUTING opt_mrouting.h PIM opt_mrouting.h INET opt_inet.h INET6 opt_inet6.h IPSEC opt_ipsec.h IPSEC_ESP opt_ipsec.h IPSEC_DEBUG opt_ipsec.h IPSEC_FILTERGIF opt_ipsec.h FAST_IPSEC opt_ipsec.h IPDIVERT DUMMYNET opt_ipdn.h IPFILTER opt_ipfilter.h IPFILTER_LOG opt_ipfilter.h IPFILTER_LOOKUP opt_ipfilter.h IPFILTER_DEFAULT_BLOCK opt_ipfilter.h IPFIREWALL opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPFIREWALL_FORWARD opt_ipfw.h IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h IPSTEALTH IPX IPXIP opt_ipx.h LIBMBPOOL LIBMCHAIN LIBALIAS MBUF_STRESS_TEST NCP NETATALK opt_atalk.h NET_WITH_GIANT opt_net.h PPP_BSDCOMP opt_ppp.h PPP_DEFLATE opt_ppp.h PPP_FILTER opt_ppp.h SLIP_IFF_OPTS opt_slip.h TCPDEBUG TCP_SIGNATURE opt_inet.h TCP_SACK_DEBUG opt_tcp_sack.h TCP_DROP_SYNFIN opt_tcp_input.h DEV_VLAN opt_vlan.h VLAN_ARRAY opt_vlan.h XBONEHACK # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH NETGRAPH_DEBUG opt_netgraph.h NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_ATMLLC opt_netgraph.h NETGRAPH_ATM_ATMPIF opt_netgraph.h NETGRAPH_BLUETOOTH opt_netgraph.h NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH_BLUETOOTH_H4 opt_netgraph.h NETGRAPH_BLUETOOTH_HCI opt_netgraph.h NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH_BLUETOOTH_UBT opt_netgraph.h NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_DEVICE opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_GIF opt_netgraph.h NETGRAPH_GIF_DEMUX opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_IP_INPUT opt_netgraph.h NETGRAPH_IPFW opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h NETGRAPH_LMI opt_netgraph.h # MPPC compression requires proprietary files (not included) NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_NAT opt_netgraph.h NETGRAPH_NETFLOW opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_SPLIT opt_netgraph.h NETGRAPH_SPPP opt_netgraph.h NETGRAPH_TCPMSS opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h # NgATM options NGATM_ATM opt_netgraph.h NGATM_ATMBASE opt_netgraph.h NGATM_SSCOP opt_netgraph.h NGATM_SSCFU opt_netgraph.h NGATM_UNI opt_netgraph.h NGATM_CCATM opt_netgraph.h # DRM options DRM_DEBUG opt_drm.h ZERO_COPY_SOCKETS opt_zero.h TI_PRIVATE_JUMBOS opt_ti.h TI_JUMBO_HDRSPLIT opt_ti.h # ATM (HARP version) ATM_CORE opt_atm.h ATM_IP opt_atm.h ATM_SIGPVC opt_atm.h ATM_SPANS opt_atm.h ATM_UNI opt_atm.h # XXX Conflict: # of devices vs network protocol (Native ATM). # This makes "atm.h" unusable. NATM # DPT driver debug flags DPT_MEASURE_PERFORMANCE opt_dpt.h DPT_HANDLE_TIMEOUTS opt_dpt.h DPT_TIMEOUT_FACTOR opt_dpt.h DPT_LOST_IRQ opt_dpt.h DPT_RESET_HBA opt_dpt.h # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. CLUSTERDEBUG opt_debug_cluster.h DEBUG_1284 opt_ppb_1284.h VP0_DEBUG opt_vpo.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h NETATALKDEBUG opt_atalk.h SI_DEBUG opt_debug_si.h # Fb options FB_DEBUG opt_fb.h FB_INSTALL_CDEV opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel BLKDEV_IOSIZE opt_global.h BURN_BRIDGES opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_VFS_LOCKS opt_global.h DIAGNOSTIC opt_global.h INVARIANT_SUPPORT opt_global.h INVARIANTS opt_global.h MCLSHIFT opt_global.h MUTEX_DEBUG opt_global.h MUTEX_NOINLINE opt_global.h MUTEX_PROFILING opt_global.h MSIZE opt_global.h REGRESSION opt_global.h RESTARTABLE_PANICS opt_global.h RWLOCK_NOINLINE opt_global.h VFS_BIO_DEBUG opt_global.h # These are VM related options VM_KMEM_SIZE opt_vm.h VM_KMEM_SIZE_SCALE opt_vm.h VM_KMEM_SIZE_MAX opt_vm.h NO_SWAPPING opt_vm.h MALLOC_MAKE_FAILURES opt_vm.h MALLOC_PROFILE opt_vm.h PQ_NOOPT opt_vmpage.h # The MemGuard replacement allocator used for tamper-after-free detection DEBUG_MEMGUARD opt_vm.h # The RedZone malloc(9) protection DEBUG_REDZONE opt_vm.h # Standard SMP options SMP opt_global.h # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_GATHERDELAY opt_nfs.h NFS_WDELAYHASHSIZ opt_nfs.h NFS_DEBUG opt_nfs.h # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver OVERRIDE_CARD opt_bktr.h OVERRIDE_TUNER opt_bktr.h OVERRIDE_DBX opt_bktr.h OVERRIDE_MSP opt_bktr.h BROOKTREE_SYSTEM_DEFAULT opt_bktr.h BROOKTREE_ALLOC_PAGES opt_bktr.h BKTR_OVERRIDE_CARD opt_bktr.h BKTR_OVERRIDE_TUNER opt_bktr.h BKTR_OVERRIDE_DBX opt_bktr.h BKTR_OVERRIDE_MSP opt_bktr.h BKTR_SYSTEM_DEFAULT opt_bktr.h BKTR_ALLOC_PAGES opt_bktr.h BKTR_USE_PLL opt_bktr.h BKTR_GPIO_ACCESS opt_bktr.h BKTR_NO_MSP_RESET opt_bktr.h BKTR_430_FX_MODE opt_bktr.h BKTR_SIS_VIA_MODE opt_bktr.h BKTR_USE_FREEBSD_SMBUS opt_bktr.h BKTR_NEW_MSP34XX_DRIVER opt_bktr.h # options for serial support COM_ESP opt_sio.h COM_MULTIPORT opt_sio.h BREAK_TO_DEBUGGER opt_comconsole.h ALT_BREAK_TO_DEBUGGER opt_comconsole.h # Options to support PPS UART_PPS_ON_CTS opt_uart.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support USB_DEBUG opt_usb.h USBVERBOSE opt_usb.h UKBD_DFLT_KEYMAP opt_ukbd.h UPLCOM_INTR_INTERVAL opt_uplcom.h UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h UVSCOM_INTR_INTERVAL opt_uvscom.h # Embedded system options INIT_PATH ROOTDEVNAME FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h KTR opt_global.h KTR_ALQ opt_ktr.h KTR_MASK opt_ktr.h KTR_CPUMASK opt_ktr.h KTR_COMPILE opt_global.h KTR_ENTRIES opt_global.h KTR_VERBOSE opt_ktr.h WITNESS opt_global.h WITNESS_KDB opt_witness.h WITNESS_SKIPSPIN opt_witness.h # options for ACPI support ACPI_DEBUG opt_acpi.h ACPI_MAX_THREADS opt_acpi.h ACPI_NO_SEMAPHORES opt_acpi.h ACPICA_PEDANTIC opt_acpi.h # ISA support DEV_ISA opt_isa.h ISAPNP opt_isa.h # options for DEVFS, see sys/fs/devfs/devfs.h NDEVFSINO opt_devfs.h NDEVFSOVERFLOW opt_devfs.h # various 'device presence' options. DEV_BPF opt_bpf.h DEV_MCA opt_mca.h DEV_CARP opt_carp.h DEV_SPLASH opt_splash.h EISA_SLOTS opt_eisa.h # ed driver ED_HPP opt_ed.h ED_3C503 opt_ed.h ED_SIC opt_ed.h # bce driver BCE_DEBUG opt_bce.h # wi driver WI_SYMBOL_FIRMWARE opt_wi.h SOCKBUF_DEBUG opt_global.h # options for ubsec driver UBSEC_DEBUG opt_ubsec.h UBSEC_RNDTEST opt_ubsec.h UBSEC_NO_RNG opt_ubsec.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # syscons options MAXCONS opt_syscons.h SC_ALT_MOUSE_IMAGE opt_syscons.h SC_CUT_SPACES2TABS opt_syscons.h SC_CUT_SEPCHARS opt_syscons.h SC_DEBUG_LEVEL opt_syscons.h SC_DFLT_FONT opt_syscons.h SC_DISABLE_KDBKEY opt_syscons.h SC_DISABLE_REBOOT opt_syscons.h SC_HISTORY_SIZE opt_syscons.h SC_KERNEL_CONS_ATTR opt_syscons.h SC_KERNEL_CONS_REV_ATTR opt_syscons.h SC_MOUSE_CHAR opt_syscons.h SC_NO_CUTPASTE opt_syscons.h SC_NO_FONT_LOADING opt_syscons.h SC_NO_HISTORY opt_syscons.h SC_NO_SUSPEND_VTYSWITCH opt_syscons.h SC_NO_SYSMOUSE opt_syscons.h SC_NORM_ATTR opt_syscons.h SC_NORM_REV_ATTR opt_syscons.h SC_PIXEL_MODE opt_syscons.h SC_RENDER_DEBUG opt_syscons.h SC_TWOBUTTON_MOUSE opt_syscons.h # kbd options KBD_DISABLE_KEYMAP_LOAD opt_kbd.h KBD_INSTALL_CDEV opt_kbd.h KBD_MAXRETRY opt_kbd.h KBD_MAXWAIT opt_kbd.h KBD_RESETDELAY opt_kbd.h KBDIO_DEBUG opt_kbd.h # options for the Atheros driver ATH_DEBUG opt_ath.h ATH_TXBUF opt_ath.h ATH_RXBUF opt_ath.h ATH_DIAGAPI opt_ath.h ATH_TX99_DIAG opt_ath.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # Static unit counts NI4BTRC opt_i4b.h NI4BRBCH opt_i4b.h NI4BTEL opt_i4b.h NI4BIPR opt_i4b.h NI4BING opt_i4b.h NI4BISPPP opt_i4b.h # VFS options LOOKUP_SHARED opt_vfs.h # HWPMC options HWPMC_HOOKS # XBOX options for FreeBSD/i386, but some files are MI XBOX opt_xbox.h # XFS XFS Index: head/sys/i386/conf/GENERIC =================================================================== --- head/sys/i386/conf/GENERIC (revision 159963) +++ head/sys/i386/conf/GENERIC (revision 159964) @@ -1,296 +1,295 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler #options SCHED_CORE # CORE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI -#options COMMONID # Enable support for common UID/GID space # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # To make an SMP kernel, the next two lines are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC # Bus support. device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. device ahd # AHA39320/29320 and onboard AIC79xx devices options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options device hptmv # Highpoint RocketRAID 182x device rr232x # Highpoint RocketRAID 232x device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit Ethernet device nge # NatSemi DP83820 gigabit Ethernet device nve # nVidia nForce MCP on-board Ethernet Networking device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath device awi # BayStack 660 and others device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) Index: head/sys/ia64/conf/GENERIC =================================================================== --- head/sys/ia64/conf/GENERIC (revision 159963) +++ head/sys/ia64/conf/GENERIC (revision 159964) @@ -1,153 +1,152 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/ia64 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check # first in NOTES. # # For hardware specific information check HARDWARE.TXT # # $FreeBSD$ cpu ITANIUM ident GENERIC makeoptions DEBUG=-g # Build kernel with debug information. options CD9660 # ISO 9660 Filesystem options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options DDB # Support DDB options FFS # Berkeley Fast Filesystem options GDB # Support remote GDB options INET # InterNETworking options INET6 # IPv6 communications protocols options KDB # Enable kernel debugger support options KTRACE # ktrace(1) syscall trace support options MD_ROOT # MD usable as root device options MSDOSFS # MSDOS Filesystem options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as root device options PROCFS # Process filesystem (/proc) options PSEUDOFS # Pseudo-filesystem framework options SCHED_4BSD # 4BSD scheduler #options SCHED_ULE # ULE scheduler options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options SMP # Symmetric Multi-Processor support options SOFTUPDATES # Enable FFS soft updates support options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options SYSVSHM # SYSV-style shared memory options UFS_ACL # Support for access control lists options UFS_DIRHASH # Hash-based directory lookup scheme options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B RT extensions -#options COMMONID # Enable support for common UID/GID space # Various "busses" device firewire # FireWire bus code device miibus # MII bus support (Ethernet) device pci # PCI bus support device scbus # SCSI bus (required for SCSI) device usb # USB Bus (required for USB) # ATA and ATAPI devices device ata # ATA controller device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device ataraid # ATA RAID drives # SCSI Controllers device ahc # AHA2940 and AIC7xxx devices device ahd # AHA39320/29320 and AIC79xx devices device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion device sym # NCR/Symbios Logic # RAID controllers interfaced to the SCSI subsystem device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV device iir # Intel Integrated RAID device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device cd # CD-ROM, DVD-ROM etc. device ch # Media changer device da # Direct Access (ie disk) device pass # Passthrough (direct SCSI access) device sa # Sequential Access (ie tape) device ses # Environmental Services (and SAF-TE) # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device amr # AMI MegaRAID device ida # Compaq Smart RAID device mlx # Mylex DAC960 family # USB host controllers and peripherals device ehci # EHCI host controller device ohci # OHCI PCI->USB interface device ugen # Generic device device uhci # UHCI PCI->USB interface device uhid # Human Interface Devices device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage (need scbus & da) device ums # Mouse # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device xl # 3Com 3c90x ("Boomerang", "Cyclone") # USB Ethernet device aue # ADMtek USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet # FireWire support device sbp # SCSI over FireWire (need scbus & da) # Various (pseudo) devices device ether # Ethernet support device faith # IPv6-to-IPv4 relaying (translation) device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory "disks" device pty # Pseudo-ttys (telnet etc) device puc # Multi I/O cards and multi-channel UARTs device random # Entropy device device tun # Packet tunnel. device uart # Serial port (UART) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter Index: head/sys/kern/vfs_subr.c =================================================================== --- head/sys/kern/vfs_subr.c (revision 159963) +++ head/sys/kern/vfs_subr.c (revision 159964) @@ -1,3963 +1,3891 @@ /*- * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)vfs_subr.c 8.31 (Berkeley) 5/26/95 */ /* * External virtual filesystem routines */ #include __FBSDID("$FreeBSD$"); #include "opt_ddb.h" #include "opt_mac.h" -#include "opt_commonid.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static MALLOC_DEFINE(M_NETADDR, "subr_export_host", "Export host address structure"); static void delmntque(struct vnode *vp); static void insmntque(struct vnode *vp, struct mount *mp); static int flushbuflist(struct bufv *bufv, int flags, struct bufobj *bo, int slpflag, int slptimeo); static void syncer_shutdown(void *arg, int howto); static int vtryrecycle(struct vnode *vp); static void vbusy(struct vnode *vp); static void vdropl(struct vnode *vp); static void vinactive(struct vnode *, struct thread *); static void v_incr_usecount(struct vnode *); static void v_decr_usecount(struct vnode *); static void v_decr_useonly(struct vnode *); static void v_upgrade_usecount(struct vnode *); static void vfree(struct vnode *); static void vnlru_free(int); static void vdestroy(struct vnode *); static void vgonel(struct vnode *); static void vfs_knllock(void *arg); static void vfs_knlunlock(void *arg); static int vfs_knllocked(void *arg); /* * Enable Giant pushdown based on whether or not the vm is mpsafe in this * build. Without mpsafevm the buffer cache can not run Giant free. */ #if defined(__amd64__) || defined(__i386__) || \ defined(__ia64__) || defined(__sparc64__) int mpsafe_vfs = 1; #else int mpsafe_vfs; #endif TUNABLE_INT("debug.mpsafevfs", &mpsafe_vfs); SYSCTL_INT(_debug, OID_AUTO, mpsafevfs, CTLFLAG_RD, &mpsafe_vfs, 0, "MPSAFE VFS"); /* * Number of vnodes in existence. Increased whenever getnewvnode() * allocates a new vnode, never decreased. */ static unsigned long numvnodes; SYSCTL_LONG(_vfs, OID_AUTO, numvnodes, CTLFLAG_RD, &numvnodes, 0, ""); /* * Conversion tables for conversion from vnode types to inode formats * and back. */ enum vtype iftovt_tab[16] = { VNON, VFIFO, VCHR, VNON, VDIR, VNON, VBLK, VNON, VREG, VNON, VLNK, VNON, VSOCK, VNON, VNON, VBAD, }; int vttoif_tab[10] = { 0, S_IFREG, S_IFDIR, S_IFBLK, S_IFCHR, S_IFLNK, S_IFSOCK, S_IFIFO, S_IFMT, S_IFMT }; /* * List of vnodes that are ready for recycling. */ static TAILQ_HEAD(freelst, vnode) vnode_free_list; /* * Free vnode target. Free vnodes may simply be files which have been stat'd * but not read. This is somewhat common, and a small cache of such files * should be kept to avoid recreation costs. */ static u_long wantfreevnodes; SYSCTL_LONG(_vfs, OID_AUTO, wantfreevnodes, CTLFLAG_RW, &wantfreevnodes, 0, ""); /* Number of vnodes in the free list. */ static u_long freevnodes; SYSCTL_LONG(_vfs, OID_AUTO, freevnodes, CTLFLAG_RD, &freevnodes, 0, ""); /* * Various variables used for debugging the new implementation of * reassignbuf(). * XXX these are probably of (very) limited utility now. */ static int reassignbufcalls; SYSCTL_INT(_vfs, OID_AUTO, reassignbufcalls, CTLFLAG_RW, &reassignbufcalls, 0, ""); /* * Cache for the mount type id assigned to NFS. This is used for * special checks in nfs/nfs_nqlease.c and vm/vnode_pager.c. */ int nfs_mount_type = -1; /* To keep more than one thread at a time from running vfs_getnewfsid */ static struct mtx mntid_mtx; /* * Lock for any access to the following: * vnode_free_list * numvnodes * freevnodes */ static struct mtx vnode_free_list_mtx; /* Publicly exported FS */ struct nfs_public nfs_pub; /* Zone for allocation of new vnodes - used exclusively by getnewvnode() */ static uma_zone_t vnode_zone; static uma_zone_t vnodepoll_zone; /* Set to 1 to print out reclaim of active vnodes */ int prtactive; /* * The workitem queue. * * It is useful to delay writes of file data and filesystem metadata * for tens of seconds so that quickly created and deleted files need * not waste disk bandwidth being created and removed. To realize this, * we append vnodes to a "workitem" queue. When running with a soft * updates implementation, most pending metadata dependencies should * not wait for more than a few seconds. Thus, mounted on block devices * are delayed only about a half the time that file data is delayed. * Similarly, directory updates are more critical, so are only delayed * about a third the time that file data is delayed. Thus, there are * SYNCER_MAXDELAY queues that are processed round-robin at a rate of * one each second (driven off the filesystem syncer process). The * syncer_delayno variable indicates the next queue that is to be processed. * Items that need to be processed soon are placed in this queue: * * syncer_workitem_pending[syncer_delayno] * * A delay of fifteen seconds is done by placing the request fifteen * entries later in the queue: * * syncer_workitem_pending[(syncer_delayno + 15) & syncer_mask] * */ static int syncer_delayno; static long syncer_mask; LIST_HEAD(synclist, bufobj); static struct synclist *syncer_workitem_pending; /* * The sync_mtx protects: * bo->bo_synclist * sync_vnode_count * syncer_delayno * syncer_state * syncer_workitem_pending * syncer_worklist_len * rushjob */ static struct mtx sync_mtx; #define SYNCER_MAXDELAY 32 static int syncer_maxdelay = SYNCER_MAXDELAY; /* maximum delay time */ static int syncdelay = 30; /* max time to delay syncing data */ static int filedelay = 30; /* time to delay syncing files */ SYSCTL_INT(_kern, OID_AUTO, filedelay, CTLFLAG_RW, &filedelay, 0, ""); static int dirdelay = 29; /* time to delay syncing directories */ SYSCTL_INT(_kern, OID_AUTO, dirdelay, CTLFLAG_RW, &dirdelay, 0, ""); static int metadelay = 28; /* time to delay syncing metadata */ SYSCTL_INT(_kern, OID_AUTO, metadelay, CTLFLAG_RW, &metadelay, 0, ""); static int rushjob; /* number of slots to run ASAP */ static int stat_rush_requests; /* number of times I/O speeded up */ SYSCTL_INT(_debug, OID_AUTO, rush_requests, CTLFLAG_RW, &stat_rush_requests, 0, ""); /* * When shutting down the syncer, run it at four times normal speed. */ #define SYNCER_SHUTDOWN_SPEEDUP 4 static int sync_vnode_count; static int syncer_worklist_len; static enum { SYNCER_RUNNING, SYNCER_SHUTTING_DOWN, SYNCER_FINAL_DELAY } syncer_state; /* * Number of vnodes we want to exist at any one time. This is mostly used * to size hash tables in vnode-related code. It is normally not used in * getnewvnode(), as wantfreevnodes is normally nonzero.) * * XXX desiredvnodes is historical cruft and should not exist. */ int desiredvnodes; SYSCTL_INT(_kern, KERN_MAXVNODES, maxvnodes, CTLFLAG_RW, &desiredvnodes, 0, "Maximum number of vnodes"); SYSCTL_INT(_kern, OID_AUTO, minvnodes, CTLFLAG_RW, &wantfreevnodes, 0, "Minimum number of vnodes (legacy)"); static int vnlru_nowhere; SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, &vnlru_nowhere, 0, "Number of times the vnlru process ran without success"); /* * Macros to control when a vnode is freed and recycled. All require * the vnode interlock. */ #define VCANRECYCLE(vp) (((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDFREE(vp) (!((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDBUSY(vp) (((vp)->v_iflag & VI_FREE) && (vp)->v_holdcnt) -#ifdef COMMONID -/* - * Sysctl variables to control the unified user and group ID space. - */ -/* ID below that are the traditional system IDs that - * can't be in the common space - */ -#define MINCOMMONID 100 - -typedef struct { - int enabled; /* flag: commonid is enabled */ - int low; /* the lowest common ID */ - int high; /* the highest common ID */ -} commonid_ctl_t; - -static commonid_ctl_t commonid = { 0, 1000, 60000 }; /* safe values */ - -SYSCTL_NODE(_vfs, OID_AUTO, commonid, CTLFLAG_RW, 0, "Common UID/GID space"); -SYSCTL_NODE(_vfs_commonid, OID_AUTO, local, CTLFLAG_RW, 0, - "Common UID/GID space for local filesystems"); -SYSCTL_INT(_vfs_commonid_local, OID_AUTO, enabled, CTLFLAG_RW, - &commonid.enabled, 0, - "Enable common UID/GID space for local filesystems"); -SYSCTL_INT(_vfs_commonid_local, OID_AUTO, low, CTLFLAG_RW, &commonid.low, - 0, "Lowest common UID/GID value for local filesystems"); -SYSCTL_INT(_vfs_commonid_local, OID_AUTO, high, CTLFLAG_RW, &commonid.high, - 0, "Highest common UID/GID value for local filesystems"); - -#endif /* COMMONID */ - /* * Initialize the vnode management data structures. */ #ifndef MAXVNODES_MAX #define MAXVNODES_MAX 100000 #endif static void vntblinit(void *dummy __unused) { /* * Desiredvnodes is a function of the physical memory size and * the kernel's heap size. Specifically, desiredvnodes scales * in proportion to the physical memory size until two fifths * of the kernel's heap size is consumed by vnodes and vm * objects. */ desiredvnodes = min(maxproc + cnt.v_page_count / 4, 2 * vm_kmem_size / (5 * (sizeof(struct vm_object) + sizeof(struct vnode)))); if (desiredvnodes > MAXVNODES_MAX) { if (bootverbose) printf("Reducing kern.maxvnodes %d -> %d\n", desiredvnodes, MAXVNODES_MAX); desiredvnodes = MAXVNODES_MAX; } wantfreevnodes = desiredvnodes / 4; mtx_init(&mntid_mtx, "mntid", NULL, MTX_DEF); TAILQ_INIT(&vnode_free_list); mtx_init(&vnode_free_list_mtx, "vnode_free_list", NULL, MTX_DEF); vnode_zone = uma_zcreate("VNODE", sizeof (struct vnode), NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE); vnodepoll_zone = uma_zcreate("VNODEPOLL", sizeof (struct vpollinfo), NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE); /* * Initialize the filesystem syncer. */ syncer_workitem_pending = hashinit(syncer_maxdelay, M_VNODE, &syncer_mask); syncer_maxdelay = syncer_mask + 1; mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF); } SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL) /* * Mark a mount point as busy. Used to synchronize access and to delay * unmounting. Interlock is not released on failure. */ int vfs_busy(struct mount *mp, int flags, struct mtx *interlkp, struct thread *td) { int lkflags; MNT_ILOCK(mp); MNT_REF(mp); if (mp->mnt_kern_flag & MNTK_UNMOUNT) { if (flags & LK_NOWAIT) { MNT_REL(mp); MNT_IUNLOCK(mp); return (ENOENT); } if (interlkp) mtx_unlock(interlkp); mp->mnt_kern_flag |= MNTK_MWAIT; /* * Since all busy locks are shared except the exclusive * lock granted when unmounting, the only place that a * wakeup needs to be done is at the release of the * exclusive lock at the end of dounmount. */ msleep(mp, MNT_MTX(mp), PVFS, "vfs_busy", 0); MNT_REL(mp); MNT_IUNLOCK(mp); if (interlkp) mtx_lock(interlkp); return (ENOENT); } if (interlkp) mtx_unlock(interlkp); lkflags = LK_SHARED | LK_INTERLOCK; if (lockmgr(&mp->mnt_lock, lkflags, MNT_MTX(mp), td)) panic("vfs_busy: unexpected lock failure"); return (0); } /* * Free a busy filesystem. */ void vfs_unbusy(struct mount *mp, struct thread *td) { lockmgr(&mp->mnt_lock, LK_RELEASE, NULL, td); vfs_rel(mp); } /* * Lookup a mount point by filesystem identifier. */ struct mount * vfs_getvfs(fsid_t *fsid) { struct mount *mp; mtx_lock(&mountlist_mtx); TAILQ_FOREACH(mp, &mountlist, mnt_list) { if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] && mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) { vfs_ref(mp); mtx_unlock(&mountlist_mtx); return (mp); } } mtx_unlock(&mountlist_mtx); return ((struct mount *) 0); } /* * Check if a user can access priveledged mount options. */ int vfs_suser(struct mount *mp, struct thread *td) { int error; if ((mp->mnt_flag & MNT_USER) == 0 || mp->mnt_cred->cr_uid != td->td_ucred->cr_uid) { if ((error = suser(td)) != 0) return (error); } return (0); } /* * Get a new unique fsid. Try to make its val[0] unique, since this value * will be used to create fake device numbers for stat(). Also try (but * not so hard) make its val[0] unique mod 2^16, since some emulators only * support 16-bit device numbers. We end up with unique val[0]'s for the * first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls. * * Keep in mind that several mounts may be running in parallel. Starting * the search one past where the previous search terminated is both a * micro-optimization and a defense against returning the same fsid to * different mounts. */ void vfs_getnewfsid(struct mount *mp) { static u_int16_t mntid_base; struct mount *nmp; fsid_t tfsid; int mtype; mtx_lock(&mntid_mtx); mtype = mp->mnt_vfc->vfc_typenum; tfsid.val[1] = mtype; mtype = (mtype & 0xFF) << 24; for (;;) { tfsid.val[0] = makedev(255, mtype | ((mntid_base & 0xFF00) << 8) | (mntid_base & 0xFF)); mntid_base++; if ((nmp = vfs_getvfs(&tfsid)) == NULL) break; vfs_rel(nmp); } mp->mnt_stat.f_fsid.val[0] = tfsid.val[0]; mp->mnt_stat.f_fsid.val[1] = tfsid.val[1]; mtx_unlock(&mntid_mtx); } /* * Knob to control the precision of file timestamps: * * 0 = seconds only; nanoseconds zeroed. * 1 = seconds and nanoseconds, accurate within 1/HZ. * 2 = seconds and nanoseconds, truncated to microseconds. * >=3 = seconds and nanoseconds, maximum precision. */ enum { TSP_SEC, TSP_HZ, TSP_USEC, TSP_NSEC }; static int timestamp_precision = TSP_SEC; SYSCTL_INT(_vfs, OID_AUTO, timestamp_precision, CTLFLAG_RW, ×tamp_precision, 0, ""); /* * Get a current timestamp. */ void vfs_timestamp(struct timespec *tsp) { struct timeval tv; switch (timestamp_precision) { case TSP_SEC: tsp->tv_sec = time_second; tsp->tv_nsec = 0; break; case TSP_HZ: getnanotime(tsp); break; case TSP_USEC: microtime(&tv); TIMEVAL_TO_TIMESPEC(&tv, tsp); break; case TSP_NSEC: default: nanotime(tsp); break; } } /* * Set vnode attributes to VNOVAL */ void vattr_null(struct vattr *vap) { vap->va_type = VNON; vap->va_size = VNOVAL; vap->va_bytes = VNOVAL; vap->va_mode = VNOVAL; vap->va_nlink = VNOVAL; vap->va_uid = VNOVAL; vap->va_gid = VNOVAL; vap->va_fsid = VNOVAL; vap->va_fileid = VNOVAL; vap->va_blocksize = VNOVAL; vap->va_rdev = VNOVAL; vap->va_atime.tv_sec = VNOVAL; vap->va_atime.tv_nsec = VNOVAL; vap->va_mtime.tv_sec = VNOVAL; vap->va_mtime.tv_nsec = VNOVAL; vap->va_ctime.tv_sec = VNOVAL; vap->va_ctime.tv_nsec = VNOVAL; vap->va_birthtime.tv_sec = VNOVAL; vap->va_birthtime.tv_nsec = VNOVAL; vap->va_flags = VNOVAL; vap->va_gen = VNOVAL; vap->va_vaflags = 0; } /* * This routine is called when we have too many vnodes. It attempts * to free vnodes and will potentially free vnodes that still * have VM backing store (VM backing store is typically the cause * of a vnode blowout so we want to do this). Therefore, this operation * is not considered cheap. * * A number of conditions may prevent a vnode from being reclaimed. * the buffer cache may have references on the vnode, a directory * vnode may still have references due to the namei cache representing * underlying files, or the vnode may be in active use. It is not * desireable to reuse such vnodes. These conditions may cause the * number of vnodes to reach some minimum value regardless of what * you set kern.maxvnodes to. Do not set kern.maxvnodes too low. */ static int vlrureclaim(struct mount *mp) { struct thread *td; struct vnode *vp; int done; int trigger; int usevnodes; int count; /* * Calculate the trigger point, don't allow user * screwups to blow us up. This prevents us from * recycling vnodes with lots of resident pages. We * aren't trying to free memory, we are trying to * free vnodes. */ usevnodes = desiredvnodes; if (usevnodes <= 0) usevnodes = 1; trigger = cnt.v_page_count * 2 / usevnodes; done = 0; td = curthread; vn_start_write(NULL, &mp, V_WAIT); MNT_ILOCK(mp); count = mp->mnt_nvnodelistsize / 10 + 1; while (count != 0) { vp = TAILQ_FIRST(&mp->mnt_nvnodelist); while (vp != NULL && vp->v_type == VMARKER) vp = TAILQ_NEXT(vp, v_nmntvnodes); if (vp == NULL) break; TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes); TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes); --count; if (!VI_TRYLOCK(vp)) goto next_iter; /* * If it's been deconstructed already, it's still * referenced, or it exceeds the trigger, skip it. */ if (vp->v_usecount || !LIST_EMPTY(&(vp)->v_cache_src) || (vp->v_iflag & VI_DOOMED) != 0 || (vp->v_object != NULL && vp->v_object->resident_page_count > trigger)) { VI_UNLOCK(vp); goto next_iter; } MNT_IUNLOCK(mp); vholdl(vp); if (VOP_LOCK(vp, LK_INTERLOCK|LK_EXCLUSIVE|LK_NOWAIT, td)) { vdrop(vp); goto next_iter_mntunlocked; } VI_LOCK(vp); /* * v_usecount may have been bumped after VOP_LOCK() dropped * the vnode interlock and before it was locked again. * * It is not necessary to recheck VI_DOOMED because it can * only be set by another thread that holds both the vnode * lock and vnode interlock. If another thread has the * vnode lock before we get to VOP_LOCK() and obtains the * vnode interlock after VOP_LOCK() drops the vnode * interlock, the other thread will be unable to drop the * vnode lock before our VOP_LOCK() call fails. */ if (vp->v_usecount || !LIST_EMPTY(&(vp)->v_cache_src) || (vp->v_object != NULL && vp->v_object->resident_page_count > trigger)) { VOP_UNLOCK(vp, LK_INTERLOCK, td); goto next_iter_mntunlocked; } KASSERT((vp->v_iflag & VI_DOOMED) == 0, ("VI_DOOMED unexpectedly detected in vlrureclaim()")); vgonel(vp); VOP_UNLOCK(vp, 0, td); vdropl(vp); done++; next_iter_mntunlocked: if ((count % 256) != 0) goto relock_mnt; goto yield; next_iter: if ((count % 256) != 0) continue; MNT_IUNLOCK(mp); yield: uio_yield(); relock_mnt: MNT_ILOCK(mp); } MNT_IUNLOCK(mp); vn_finished_write(mp); return done; } /* * Attempt to keep the free list at wantfreevnodes length. */ static void vnlru_free(int count) { struct vnode *vp; int vfslocked; mtx_assert(&vnode_free_list_mtx, MA_OWNED); for (; count > 0; count--) { vp = TAILQ_FIRST(&vnode_free_list); /* * The list can be modified while the free_list_mtx * has been dropped and vp could be NULL here. */ if (!vp) break; VNASSERT(vp->v_op != NULL, vp, ("vnlru_free: vnode already reclaimed.")); TAILQ_REMOVE(&vnode_free_list, vp, v_freelist); /* * Don't recycle if we can't get the interlock. */ if (!VI_TRYLOCK(vp)) { TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist); continue; } VNASSERT(VCANRECYCLE(vp), vp, ("vp inconsistent on freelist")); freevnodes--; vp->v_iflag &= ~VI_FREE; vholdl(vp); mtx_unlock(&vnode_free_list_mtx); VI_UNLOCK(vp); vfslocked = VFS_LOCK_GIANT(vp->v_mount); vtryrecycle(vp); VFS_UNLOCK_GIANT(vfslocked); /* * If the recycled succeeded this vdrop will actually free * the vnode. If not it will simply place it back on * the free list. */ vdrop(vp); mtx_lock(&vnode_free_list_mtx); } } /* * Attempt to recycle vnodes in a context that is always safe to block. * Calling vlrurecycle() from the bowels of filesystem code has some * interesting deadlock problems. */ static struct proc *vnlruproc; static int vnlruproc_sig; static void vnlru_proc(void) { struct mount *mp, *nmp; int done; struct proc *p = vnlruproc; struct thread *td = FIRST_THREAD_IN_PROC(p); mtx_lock(&Giant); EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, p, SHUTDOWN_PRI_FIRST); for (;;) { kthread_suspend_check(p); mtx_lock(&vnode_free_list_mtx); if (freevnodes > wantfreevnodes) vnlru_free(freevnodes - wantfreevnodes); if (numvnodes <= desiredvnodes * 9 / 10) { vnlruproc_sig = 0; wakeup(&vnlruproc_sig); msleep(vnlruproc, &vnode_free_list_mtx, PVFS|PDROP, "vlruwt", hz); continue; } mtx_unlock(&vnode_free_list_mtx); done = 0; mtx_lock(&mountlist_mtx); for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) { int vfsunlocked; if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td)) { nmp = TAILQ_NEXT(mp, mnt_list); continue; } if (!VFS_NEEDSGIANT(mp)) { mtx_unlock(&Giant); vfsunlocked = 1; } else vfsunlocked = 0; done += vlrureclaim(mp); if (vfsunlocked) mtx_lock(&Giant); mtx_lock(&mountlist_mtx); nmp = TAILQ_NEXT(mp, mnt_list); vfs_unbusy(mp, td); } mtx_unlock(&mountlist_mtx); if (done == 0) { #if 0 /* These messages are temporary debugging aids */ if (vnlru_nowhere < 5) printf("vnlru process getting nowhere..\n"); else if (vnlru_nowhere == 5) printf("vnlru process messages stopped.\n"); #endif vnlru_nowhere++; tsleep(vnlruproc, PPAUSE, "vlrup", hz * 3); } else uio_yield(); } } static struct kproc_desc vnlru_kp = { "vnlru", vnlru_proc, &vnlruproc }; SYSINIT(vnlru, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &vnlru_kp) /* * Routines having to do with the management of the vnode table. */ static void vdestroy(struct vnode *vp) { struct bufobj *bo; CTR1(KTR_VFS, "vdestroy vp %p", vp); mtx_lock(&vnode_free_list_mtx); numvnodes--; mtx_unlock(&vnode_free_list_mtx); bo = &vp->v_bufobj; VNASSERT((vp->v_iflag & VI_FREE) == 0, vp, ("cleaned vnode still on the free list.")); VNASSERT(vp->v_data == NULL, vp, ("cleaned vnode isn't")); VNASSERT(vp->v_holdcnt == 0, vp, ("Non-zero hold count")); VNASSERT(vp->v_usecount == 0, vp, ("Non-zero use count")); VNASSERT(vp->v_writecount == 0, vp, ("Non-zero write count")); VNASSERT(bo->bo_numoutput == 0, vp, ("Clean vnode has pending I/O's")); VNASSERT(bo->bo_clean.bv_cnt == 0, vp, ("cleanbufcnt not 0")); VNASSERT(bo->bo_clean.bv_root == NULL, vp, ("cleanblkroot not NULL")); VNASSERT(bo->bo_dirty.bv_cnt == 0, vp, ("dirtybufcnt not 0")); VNASSERT(bo->bo_dirty.bv_root == NULL, vp, ("dirtyblkroot not NULL")); VNASSERT(TAILQ_EMPTY(&vp->v_cache_dst), vp, ("vp has namecache dst")); VNASSERT(LIST_EMPTY(&vp->v_cache_src), vp, ("vp has namecache src")); VI_UNLOCK(vp); if (vp->v_pollinfo != NULL) { knlist_destroy(&vp->v_pollinfo->vpi_selinfo.si_note); mtx_destroy(&vp->v_pollinfo->vpi_lock); uma_zfree(vnodepoll_zone, vp->v_pollinfo); } #ifdef INVARIANTS /* XXX Elsewhere we can detect an already freed vnode via NULL v_op. */ vp->v_op = NULL; #endif lockdestroy(vp->v_vnlock); mtx_destroy(&vp->v_interlock); #ifdef MAC mac_destroy_vnode(vp); #endif uma_zfree(vnode_zone, vp); } /* * Try to recycle a freed vnode. We abort if anyone picks up a reference * before we actually vgone(). This function must be called with the vnode * held to prevent the vnode from being returned to the free list midway * through vgone(). */ static int vtryrecycle(struct vnode *vp) { struct thread *td = curthread; struct mount *vnmp; CTR1(KTR_VFS, "vtryrecycle: trying vp %p", vp); VNASSERT(vp->v_holdcnt, vp, ("vtryrecycle: Recycling vp %p without a reference.", vp)); /* * This vnode may found and locked via some other list, if so we * can't recycle it yet. */ if (VOP_LOCK(vp, LK_EXCLUSIVE | LK_NOWAIT, td) != 0) return (EWOULDBLOCK); /* * Don't recycle if its filesystem is being suspended. */ if (vn_start_write(vp, &vnmp, V_NOWAIT) != 0) { VOP_UNLOCK(vp, 0, td); return (EBUSY); } /* * If we got this far, we need to acquire the interlock and see if * anyone picked up this vnode from another list. If not, we will * mark it with DOOMED via vgonel() so that anyone who does find it * will skip over it. */ VI_LOCK(vp); if (vp->v_usecount) { VOP_UNLOCK(vp, LK_INTERLOCK, td); vn_finished_write(vnmp); return (EBUSY); } if ((vp->v_iflag & VI_DOOMED) == 0) vgonel(vp); VOP_UNLOCK(vp, LK_INTERLOCK, td); vn_finished_write(vnmp); CTR1(KTR_VFS, "vtryrecycle: recycled vp %p", vp); return (0); } /* * Return the next vnode from the free list. */ int getnewvnode(const char *tag, struct mount *mp, struct vop_vector *vops, struct vnode **vpp) { struct vnode *vp = NULL; struct bufobj *bo; mtx_lock(&vnode_free_list_mtx); /* * Lend our context to reclaim vnodes if they've exceeded the max. */ if (freevnodes > wantfreevnodes) vnlru_free(1); /* * Wait for available vnodes. */ if (numvnodes > desiredvnodes) { if (vnlruproc_sig == 0) { vnlruproc_sig = 1; /* avoid unnecessary wakeups */ wakeup(vnlruproc); } msleep(&vnlruproc_sig, &vnode_free_list_mtx, PVFS, "vlruwk", hz); #if 0 /* XXX Not all VFS_VGET/ffs_vget callers check returns. */ if (numvnodes > desiredvnodes) { mtx_unlock(&vnode_free_list_mtx); return (ENFILE); } #endif } numvnodes++; mtx_unlock(&vnode_free_list_mtx); vp = (struct vnode *) uma_zalloc(vnode_zone, M_WAITOK|M_ZERO); /* * Setup locks. */ vp->v_vnlock = &vp->v_lock; mtx_init(&vp->v_interlock, "vnode interlock", NULL, MTX_DEF); /* * By default, don't allow shared locks unless filesystems * opt-in. */ lockinit(vp->v_vnlock, PVFS, tag, VLKTIMEOUT, LK_NOSHARE); /* * Initialize bufobj. */ bo = &vp->v_bufobj; bo->__bo_vnode = vp; bo->bo_mtx = &vp->v_interlock; bo->bo_ops = &buf_ops_bio; bo->bo_private = vp; TAILQ_INIT(&bo->bo_clean.bv_hd); TAILQ_INIT(&bo->bo_dirty.bv_hd); /* * Initialize namecache. */ LIST_INIT(&vp->v_cache_src); TAILQ_INIT(&vp->v_cache_dst); /* * Finalize various vnode identity bits. */ vp->v_type = VNON; vp->v_tag = tag; vp->v_op = vops; v_incr_usecount(vp); vp->v_data = 0; #ifdef MAC mac_init_vnode(vp); if (mp != NULL && (mp->mnt_flag & MNT_MULTILABEL) == 0) mac_associate_vnode_singlelabel(mp, vp); else if (mp == NULL) printf("NULL mp in getnewvnode()\n"); #endif if (mp != NULL) { insmntque(vp, mp); bo->bo_bsize = mp->mnt_stat.f_iosize; if ((mp->mnt_kern_flag & MNTK_NOKNOTE) != 0) vp->v_vflag |= VV_NOKNOTE; } CTR2(KTR_VFS, "getnewvnode: mp %p vp %p", mp, vp); *vpp = vp; return (0); } /* * Delete from old mount point vnode list, if on one. */ static void delmntque(struct vnode *vp) { struct mount *mp; mp = vp->v_mount; if (mp == NULL) return; MNT_ILOCK(mp); vp->v_mount = NULL; VNASSERT(mp->mnt_nvnodelistsize > 0, vp, ("bad mount point vnode list size")); TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes); mp->mnt_nvnodelistsize--; MNT_REL(mp); MNT_IUNLOCK(mp); } /* * Insert into list of vnodes for the new mount point, if available. */ static void insmntque(struct vnode *vp, struct mount *mp) { vp->v_mount = mp; VNASSERT(mp != NULL, vp, ("Don't call insmntque(foo, NULL)")); MNT_ILOCK(mp); MNT_REF(mp); TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes); VNASSERT(mp->mnt_nvnodelistsize >= 0, vp, ("neg mount point vnode list size")); mp->mnt_nvnodelistsize++; MNT_IUNLOCK(mp); } /* * Flush out and invalidate all buffers associated with a bufobj * Called with the underlying object locked. */ int bufobj_invalbuf(struct bufobj *bo, int flags, struct thread *td, int slpflag, int slptimeo) { int error; BO_LOCK(bo); if (flags & V_SAVE) { error = bufobj_wwait(bo, slpflag, slptimeo); if (error) { BO_UNLOCK(bo); return (error); } if (bo->bo_dirty.bv_cnt > 0) { BO_UNLOCK(bo); if ((error = BO_SYNC(bo, MNT_WAIT, td)) != 0) return (error); /* * XXX We could save a lock/unlock if this was only * enabled under INVARIANTS */ BO_LOCK(bo); if (bo->bo_numoutput > 0 || bo->bo_dirty.bv_cnt > 0) panic("vinvalbuf: dirty bufs"); } } /* * If you alter this loop please notice that interlock is dropped and * reacquired in flushbuflist. Special care is needed to ensure that * no race conditions occur from this. */ do { error = flushbuflist(&bo->bo_clean, flags, bo, slpflag, slptimeo); if (error == 0) error = flushbuflist(&bo->bo_dirty, flags, bo, slpflag, slptimeo); if (error != 0 && error != EAGAIN) { BO_UNLOCK(bo); return (error); } } while (error != 0); /* * Wait for I/O to complete. XXX needs cleaning up. The vnode can * have write I/O in-progress but if there is a VM object then the * VM object can also have read-I/O in-progress. */ do { bufobj_wwait(bo, 0, 0); BO_UNLOCK(bo); if (bo->bo_object != NULL) { VM_OBJECT_LOCK(bo->bo_object); vm_object_pip_wait(bo->bo_object, "bovlbx"); VM_OBJECT_UNLOCK(bo->bo_object); } BO_LOCK(bo); } while (bo->bo_numoutput > 0); BO_UNLOCK(bo); /* * Destroy the copy in the VM cache, too. */ if (bo->bo_object != NULL) { VM_OBJECT_LOCK(bo->bo_object); vm_object_page_remove(bo->bo_object, 0, 0, (flags & V_SAVE) ? TRUE : FALSE); VM_OBJECT_UNLOCK(bo->bo_object); } #ifdef INVARIANTS BO_LOCK(bo); if ((flags & (V_ALT | V_NORMAL)) == 0 && (bo->bo_dirty.bv_cnt > 0 || bo->bo_clean.bv_cnt > 0)) panic("vinvalbuf: flush failed"); BO_UNLOCK(bo); #endif return (0); } /* * Flush out and invalidate all buffers associated with a vnode. * Called with the underlying object locked. */ int vinvalbuf(struct vnode *vp, int flags, struct thread *td, int slpflag, int slptimeo) { CTR2(KTR_VFS, "vinvalbuf vp %p flags %d", vp, flags); ASSERT_VOP_LOCKED(vp, "vinvalbuf"); return (bufobj_invalbuf(&vp->v_bufobj, flags, td, slpflag, slptimeo)); } /* * Flush out buffers on the specified list. * */ static int flushbuflist( struct bufv *bufv, int flags, struct bufobj *bo, int slpflag, int slptimeo) { struct buf *bp, *nbp; int retval, error; daddr_t lblkno; b_xflags_t xflags; ASSERT_BO_LOCKED(bo); retval = 0; TAILQ_FOREACH_SAFE(bp, &bufv->bv_hd, b_bobufs, nbp) { if (((flags & V_NORMAL) && (bp->b_xflags & BX_ALTDATA)) || ((flags & V_ALT) && (bp->b_xflags & BX_ALTDATA) == 0)) { continue; } lblkno = 0; xflags = 0; if (nbp != NULL) { lblkno = nbp->b_lblkno; xflags = nbp->b_xflags & (BX_BKGRDMARKER | BX_VNDIRTY | BX_VNCLEAN); } retval = EAGAIN; error = BUF_TIMELOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, BO_MTX(bo), "flushbuf", slpflag, slptimeo); if (error) { BO_LOCK(bo); return (error != ENOLCK ? error : EAGAIN); } KASSERT(bp->b_bufobj == bo, ("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo)); if (bp->b_bufobj != bo) { /* XXX: necessary ? */ BUF_UNLOCK(bp); BO_LOCK(bo); return (EAGAIN); } /* * XXX Since there are no node locks for NFS, I * believe there is a slight chance that a delayed * write will occur while sleeping just above, so * check for it. */ if (((bp->b_flags & (B_DELWRI | B_INVAL)) == B_DELWRI) && (flags & V_SAVE)) { bremfree(bp); bp->b_flags |= B_ASYNC; bwrite(bp); BO_LOCK(bo); return (EAGAIN); /* XXX: why not loop ? */ } bremfree(bp); bp->b_flags |= (B_INVAL | B_RELBUF); bp->b_flags &= ~B_ASYNC; brelse(bp); BO_LOCK(bo); if (nbp != NULL && (nbp->b_bufobj != bo || nbp->b_lblkno != lblkno || (nbp->b_xflags & (BX_BKGRDMARKER | BX_VNDIRTY | BX_VNCLEAN)) != xflags)) break; /* nbp invalid */ } return (retval); } /* * Truncate a file's buffer and pages to a specified length. This * is in lieu of the old vinvalbuf mechanism, which performed unneeded * sync activity. */ int vtruncbuf(struct vnode *vp, struct ucred *cred, struct thread *td, off_t length, int blksize) { struct buf *bp, *nbp; int anyfreed; int trunclbn; struct bufobj *bo; CTR2(KTR_VFS, "vtruncbuf vp %p length %jd", vp, length); /* * Round up to the *next* lbn. */ trunclbn = (length + blksize - 1) / blksize; ASSERT_VOP_LOCKED(vp, "vtruncbuf"); restart: VI_LOCK(vp); bo = &vp->v_bufobj; anyfreed = 1; for (;anyfreed;) { anyfreed = 0; TAILQ_FOREACH_SAFE(bp, &bo->bo_clean.bv_hd, b_bobufs, nbp) { if (bp->b_lblkno < trunclbn) continue; if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, VI_MTX(vp)) == ENOLCK) goto restart; bremfree(bp); bp->b_flags |= (B_INVAL | B_RELBUF); bp->b_flags &= ~B_ASYNC; brelse(bp); anyfreed = 1; if (nbp != NULL && (((nbp->b_xflags & BX_VNCLEAN) == 0) || (nbp->b_vp != vp) || (nbp->b_flags & B_DELWRI))) { goto restart; } VI_LOCK(vp); } TAILQ_FOREACH_SAFE(bp, &bo->bo_dirty.bv_hd, b_bobufs, nbp) { if (bp->b_lblkno < trunclbn) continue; if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, VI_MTX(vp)) == ENOLCK) goto restart; bremfree(bp); bp->b_flags |= (B_INVAL | B_RELBUF); bp->b_flags &= ~B_ASYNC; brelse(bp); anyfreed = 1; if (nbp != NULL && (((nbp->b_xflags & BX_VNDIRTY) == 0) || (nbp->b_vp != vp) || (nbp->b_flags & B_DELWRI) == 0)) { goto restart; } VI_LOCK(vp); } } if (length > 0) { restartsync: TAILQ_FOREACH_SAFE(bp, &bo->bo_dirty.bv_hd, b_bobufs, nbp) { if (bp->b_lblkno > 0) continue; /* * Since we hold the vnode lock this should only * fail if we're racing with the buf daemon. */ if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, VI_MTX(vp)) == ENOLCK) { goto restart; } VNASSERT((bp->b_flags & B_DELWRI), vp, ("buf(%p) on dirty queue without DELWRI", bp)); bremfree(bp); bawrite(bp); VI_LOCK(vp); goto restartsync; } } bufobj_wwait(bo, 0, 0); VI_UNLOCK(vp); vnode_pager_setsize(vp, length); return (0); } /* * buf_splay() - splay tree core for the clean/dirty list of buffers in * a vnode. * * NOTE: We have to deal with the special case of a background bitmap * buffer, a situation where two buffers will have the same logical * block offset. We want (1) only the foreground buffer to be accessed * in a lookup and (2) must differentiate between the foreground and * background buffer in the splay tree algorithm because the splay * tree cannot normally handle multiple entities with the same 'index'. * We accomplish this by adding differentiating flags to the splay tree's * numerical domain. */ static struct buf * buf_splay(daddr_t lblkno, b_xflags_t xflags, struct buf *root) { struct buf dummy; struct buf *lefttreemax, *righttreemin, *y; if (root == NULL) return (NULL); lefttreemax = righttreemin = &dummy; for (;;) { if (lblkno < root->b_lblkno || (lblkno == root->b_lblkno && (xflags & BX_BKGRDMARKER) < (root->b_xflags & BX_BKGRDMARKER))) { if ((y = root->b_left) == NULL) break; if (lblkno < y->b_lblkno) { /* Rotate right. */ root->b_left = y->b_right; y->b_right = root; root = y; if ((y = root->b_left) == NULL) break; } /* Link into the new root's right tree. */ righttreemin->b_left = root; righttreemin = root; } else if (lblkno > root->b_lblkno || (lblkno == root->b_lblkno && (xflags & BX_BKGRDMARKER) > (root->b_xflags & BX_BKGRDMARKER))) { if ((y = root->b_right) == NULL) break; if (lblkno > y->b_lblkno) { /* Rotate left. */ root->b_right = y->b_left; y->b_left = root; root = y; if ((y = root->b_right) == NULL) break; } /* Link into the new root's left tree. */ lefttreemax->b_right = root; lefttreemax = root; } else { break; } root = y; } /* Assemble the new root. */ lefttreemax->b_right = root->b_left; righttreemin->b_left = root->b_right; root->b_left = dummy.b_right; root->b_right = dummy.b_left; return (root); } static void buf_vlist_remove(struct buf *bp) { struct buf *root; struct bufv *bv; KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp)); ASSERT_BO_LOCKED(bp->b_bufobj); KASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) != (BX_VNDIRTY|BX_VNCLEAN), ("buf_vlist_remove: Buf %p is on two lists", bp)); if (bp->b_xflags & BX_VNDIRTY) bv = &bp->b_bufobj->bo_dirty; else bv = &bp->b_bufobj->bo_clean; if (bp != bv->bv_root) { root = buf_splay(bp->b_lblkno, bp->b_xflags, bv->bv_root); KASSERT(root == bp, ("splay lookup failed in remove")); } if (bp->b_left == NULL) { root = bp->b_right; } else { root = buf_splay(bp->b_lblkno, bp->b_xflags, bp->b_left); root->b_right = bp->b_right; } bv->bv_root = root; TAILQ_REMOVE(&bv->bv_hd, bp, b_bobufs); bv->bv_cnt--; bp->b_xflags &= ~(BX_VNDIRTY | BX_VNCLEAN); } /* * Add the buffer to the sorted clean or dirty block list using a * splay tree algorithm. * * NOTE: xflags is passed as a constant, optimizing this inline function! */ static void buf_vlist_add(struct buf *bp, struct bufobj *bo, b_xflags_t xflags) { struct buf *root; struct bufv *bv; ASSERT_BO_LOCKED(bo); KASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) == 0, ("buf_vlist_add: Buf %p has existing xflags %d", bp, bp->b_xflags)); bp->b_xflags |= xflags; if (xflags & BX_VNDIRTY) bv = &bo->bo_dirty; else bv = &bo->bo_clean; root = buf_splay(bp->b_lblkno, bp->b_xflags, bv->bv_root); if (root == NULL) { bp->b_left = NULL; bp->b_right = NULL; TAILQ_INSERT_TAIL(&bv->bv_hd, bp, b_bobufs); } else if (bp->b_lblkno < root->b_lblkno || (bp->b_lblkno == root->b_lblkno && (bp->b_xflags & BX_BKGRDMARKER) < (root->b_xflags & BX_BKGRDMARKER))) { bp->b_left = root->b_left; bp->b_right = root; root->b_left = NULL; TAILQ_INSERT_BEFORE(root, bp, b_bobufs); } else { bp->b_right = root->b_right; bp->b_left = root; root->b_right = NULL; TAILQ_INSERT_AFTER(&bv->bv_hd, root, bp, b_bobufs); } bv->bv_cnt++; bv->bv_root = bp; } /* * Lookup a buffer using the splay tree. Note that we specifically avoid * shadow buffers used in background bitmap writes. * * This code isn't quite efficient as it could be because we are maintaining * two sorted lists and do not know which list the block resides in. * * During a "make buildworld" the desired buffer is found at one of * the roots more than 60% of the time. Thus, checking both roots * before performing either splay eliminates unnecessary splays on the * first tree splayed. */ struct buf * gbincore(struct bufobj *bo, daddr_t lblkno) { struct buf *bp; ASSERT_BO_LOCKED(bo); if ((bp = bo->bo_clean.bv_root) != NULL && bp->b_lblkno == lblkno && !(bp->b_xflags & BX_BKGRDMARKER)) return (bp); if ((bp = bo->bo_dirty.bv_root) != NULL && bp->b_lblkno == lblkno && !(bp->b_xflags & BX_BKGRDMARKER)) return (bp); if ((bp = bo->bo_clean.bv_root) != NULL) { bo->bo_clean.bv_root = bp = buf_splay(lblkno, 0, bp); if (bp->b_lblkno == lblkno && !(bp->b_xflags & BX_BKGRDMARKER)) return (bp); } if ((bp = bo->bo_dirty.bv_root) != NULL) { bo->bo_dirty.bv_root = bp = buf_splay(lblkno, 0, bp); if (bp->b_lblkno == lblkno && !(bp->b_xflags & BX_BKGRDMARKER)) return (bp); } return (NULL); } /* * Associate a buffer with a vnode. */ void bgetvp(struct vnode *vp, struct buf *bp) { VNASSERT(bp->b_vp == NULL, bp->b_vp, ("bgetvp: not free")); CTR3(KTR_BUF, "bgetvp(%p) vp %p flags %X", bp, vp, bp->b_flags); VNASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) == 0, vp, ("bgetvp: bp already attached! %p", bp)); ASSERT_VI_LOCKED(vp, "bgetvp"); vholdl(vp); if (VFS_NEEDSGIANT(vp->v_mount) || vp->v_bufobj.bo_flag & BO_NEEDSGIANT) bp->b_flags |= B_NEEDSGIANT; bp->b_vp = vp; bp->b_bufobj = &vp->v_bufobj; /* * Insert onto list for new vnode. */ buf_vlist_add(bp, &vp->v_bufobj, BX_VNCLEAN); } /* * Disassociate a buffer from a vnode. */ void brelvp(struct buf *bp) { struct bufobj *bo; struct vnode *vp; CTR3(KTR_BUF, "brelvp(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags); KASSERT(bp->b_vp != NULL, ("brelvp: NULL")); /* * Delete from old vnode list, if on one. */ vp = bp->b_vp; /* XXX */ bo = bp->b_bufobj; BO_LOCK(bo); if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN)) buf_vlist_remove(bp); else panic("brelvp: Buffer %p not on queue.", bp); if ((bo->bo_flag & BO_ONWORKLST) && bo->bo_dirty.bv_cnt == 0) { bo->bo_flag &= ~BO_ONWORKLST; mtx_lock(&sync_mtx); LIST_REMOVE(bo, bo_synclist); syncer_worklist_len--; mtx_unlock(&sync_mtx); } bp->b_flags &= ~B_NEEDSGIANT; bp->b_vp = NULL; bp->b_bufobj = NULL; vdropl(vp); } /* * Add an item to the syncer work queue. */ static void vn_syncer_add_to_worklist(struct bufobj *bo, int delay) { int slot; ASSERT_BO_LOCKED(bo); mtx_lock(&sync_mtx); if (bo->bo_flag & BO_ONWORKLST) LIST_REMOVE(bo, bo_synclist); else { bo->bo_flag |= BO_ONWORKLST; syncer_worklist_len++; } if (delay > syncer_maxdelay - 2) delay = syncer_maxdelay - 2; slot = (syncer_delayno + delay) & syncer_mask; LIST_INSERT_HEAD(&syncer_workitem_pending[slot], bo, bo_synclist); mtx_unlock(&sync_mtx); } static int sysctl_vfs_worklist_len(SYSCTL_HANDLER_ARGS) { int error, len; mtx_lock(&sync_mtx); len = syncer_worklist_len - sync_vnode_count; mtx_unlock(&sync_mtx); error = SYSCTL_OUT(req, &len, sizeof(len)); return (error); } SYSCTL_PROC(_vfs, OID_AUTO, worklist_len, CTLTYPE_INT | CTLFLAG_RD, NULL, 0, sysctl_vfs_worklist_len, "I", "Syncer thread worklist length"); static struct proc *updateproc; static void sched_sync(void); static struct kproc_desc up_kp = { "syncer", sched_sync, &updateproc }; SYSINIT(syncer, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &up_kp) static int sync_vnode(struct bufobj *bo, struct thread *td) { struct vnode *vp; struct mount *mp; vp = bo->__bo_vnode; /* XXX */ if (VOP_ISLOCKED(vp, NULL) != 0) return (1); if (VI_TRYLOCK(vp) == 0) return (1); /* * We use vhold in case the vnode does not * successfully sync. vhold prevents the vnode from * going away when we unlock the sync_mtx so that * we can acquire the vnode interlock. */ vholdl(vp); mtx_unlock(&sync_mtx); VI_UNLOCK(vp); if (vn_start_write(vp, &mp, V_NOWAIT) != 0) { vdrop(vp); mtx_lock(&sync_mtx); return (1); } vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td); (void) VOP_FSYNC(vp, MNT_LAZY, td); VOP_UNLOCK(vp, 0, td); vn_finished_write(mp); VI_LOCK(vp); if ((bo->bo_flag & BO_ONWORKLST) != 0) { /* * Put us back on the worklist. The worklist * routine will remove us from our current * position and then add us back in at a later * position. */ vn_syncer_add_to_worklist(bo, syncdelay); } vdropl(vp); mtx_lock(&sync_mtx); return (0); } /* * System filesystem synchronizer daemon. */ static void sched_sync(void) { struct synclist *next; struct synclist *slp; struct bufobj *bo; long starttime; struct thread *td = FIRST_THREAD_IN_PROC(updateproc); static int dummychan; int last_work_seen; int net_worklist_len; int syncer_final_iter; int first_printf; int error; mtx_lock(&Giant); last_work_seen = 0; syncer_final_iter = 0; first_printf = 1; syncer_state = SYNCER_RUNNING; starttime = time_uptime; td->td_pflags |= TDP_NORUNNINGBUF; EVENTHANDLER_REGISTER(shutdown_pre_sync, syncer_shutdown, td->td_proc, SHUTDOWN_PRI_LAST); for (;;) { mtx_lock(&sync_mtx); if (syncer_state == SYNCER_FINAL_DELAY && syncer_final_iter == 0) { mtx_unlock(&sync_mtx); kthread_suspend_check(td->td_proc); mtx_lock(&sync_mtx); } net_worklist_len = syncer_worklist_len - sync_vnode_count; if (syncer_state != SYNCER_RUNNING && starttime != time_uptime) { if (first_printf) { printf("\nSyncing disks, vnodes remaining..."); first_printf = 0; } printf("%d ", net_worklist_len); } starttime = time_uptime; /* * Push files whose dirty time has expired. Be careful * of interrupt race on slp queue. * * Skip over empty worklist slots when shutting down. */ do { slp = &syncer_workitem_pending[syncer_delayno]; syncer_delayno += 1; if (syncer_delayno == syncer_maxdelay) syncer_delayno = 0; next = &syncer_workitem_pending[syncer_delayno]; /* * If the worklist has wrapped since the * it was emptied of all but syncer vnodes, * switch to the FINAL_DELAY state and run * for one more second. */ if (syncer_state == SYNCER_SHUTTING_DOWN && net_worklist_len == 0 && last_work_seen == syncer_delayno) { syncer_state = SYNCER_FINAL_DELAY; syncer_final_iter = SYNCER_SHUTDOWN_SPEEDUP; } } while (syncer_state != SYNCER_RUNNING && LIST_EMPTY(slp) && syncer_worklist_len > 0); /* * Keep track of the last time there was anything * on the worklist other than syncer vnodes. * Return to the SHUTTING_DOWN state if any * new work appears. */ if (net_worklist_len > 0 || syncer_state == SYNCER_RUNNING) last_work_seen = syncer_delayno; if (net_worklist_len > 0 && syncer_state == SYNCER_FINAL_DELAY) syncer_state = SYNCER_SHUTTING_DOWN; while ((bo = LIST_FIRST(slp)) != NULL) { error = sync_vnode(bo, td); if (error == 1) { LIST_REMOVE(bo, bo_synclist); LIST_INSERT_HEAD(next, bo, bo_synclist); continue; } } if (syncer_state == SYNCER_FINAL_DELAY && syncer_final_iter > 0) syncer_final_iter--; mtx_unlock(&sync_mtx); /* * The variable rushjob allows the kernel to speed up the * processing of the filesystem syncer process. A rushjob * value of N tells the filesystem syncer to process the next * N seconds worth of work on its queue ASAP. Currently rushjob * is used by the soft update code to speed up the filesystem * syncer process when the incore state is getting so far * ahead of the disk that the kernel memory pool is being * threatened with exhaustion. */ mtx_lock(&sync_mtx); if (rushjob > 0) { rushjob -= 1; mtx_unlock(&sync_mtx); continue; } mtx_unlock(&sync_mtx); /* * Just sleep for a short period if time between * iterations when shutting down to allow some I/O * to happen. * * If it has taken us less than a second to process the * current work, then wait. Otherwise start right over * again. We can still lose time if any single round * takes more than two seconds, but it does not really * matter as we are just trying to generally pace the * filesystem activity. */ if (syncer_state != SYNCER_RUNNING) tsleep(&dummychan, PPAUSE, "syncfnl", hz / SYNCER_SHUTDOWN_SPEEDUP); else if (time_uptime == starttime) tsleep(&lbolt, PPAUSE, "syncer", 0); } } /* * Request the syncer daemon to speed up its work. * We never push it to speed up more than half of its * normal turn time, otherwise it could take over the cpu. */ int speedup_syncer() { struct thread *td; int ret = 0; td = FIRST_THREAD_IN_PROC(updateproc); sleepq_remove(td, &lbolt); mtx_lock(&sync_mtx); if (rushjob < syncdelay / 2) { rushjob += 1; stat_rush_requests += 1; ret = 1; } mtx_unlock(&sync_mtx); return (ret); } /* * Tell the syncer to speed up its work and run though its work * list several times, then tell it to shut down. */ static void syncer_shutdown(void *arg, int howto) { struct thread *td; if (howto & RB_NOSYNC) return; td = FIRST_THREAD_IN_PROC(updateproc); sleepq_remove(td, &lbolt); mtx_lock(&sync_mtx); syncer_state = SYNCER_SHUTTING_DOWN; rushjob = 0; mtx_unlock(&sync_mtx); kproc_shutdown(arg, howto); } /* * Reassign a buffer from one vnode to another. * Used to assign file specific control information * (indirect blocks) to the vnode to which they belong. */ void reassignbuf(struct buf *bp) { struct vnode *vp; struct bufobj *bo; int delay; #ifdef INVARIANTS struct bufv *bv; #endif vp = bp->b_vp; bo = bp->b_bufobj; ++reassignbufcalls; CTR3(KTR_BUF, "reassignbuf(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags); /* * B_PAGING flagged buffers cannot be reassigned because their vp * is not fully linked in. */ if (bp->b_flags & B_PAGING) panic("cannot reassign paging buffer"); /* * Delete from old vnode list, if on one. */ VI_LOCK(vp); if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN)) buf_vlist_remove(bp); else panic("reassignbuf: Buffer %p not on queue.", bp); /* * If dirty, put on list of dirty buffers; otherwise insert onto list * of clean buffers. */ if (bp->b_flags & B_DELWRI) { if ((bo->bo_flag & BO_ONWORKLST) == 0) { switch (vp->v_type) { case VDIR: delay = dirdelay; break; case VCHR: delay = metadelay; break; default: delay = filedelay; } vn_syncer_add_to_worklist(bo, delay); } buf_vlist_add(bp, bo, BX_VNDIRTY); } else { buf_vlist_add(bp, bo, BX_VNCLEAN); if ((bo->bo_flag & BO_ONWORKLST) && bo->bo_dirty.bv_cnt == 0) { mtx_lock(&sync_mtx); LIST_REMOVE(bo, bo_synclist); syncer_worklist_len--; mtx_unlock(&sync_mtx); bo->bo_flag &= ~BO_ONWORKLST; } } #ifdef INVARIANTS bv = &bo->bo_clean; bp = TAILQ_FIRST(&bv->bv_hd); KASSERT(bp == NULL || bp->b_bufobj == bo, ("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo)); bp = TAILQ_LAST(&bv->bv_hd, buflists); KASSERT(bp == NULL || bp->b_bufobj == bo, ("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo)); bv = &bo->bo_dirty; bp = TAILQ_FIRST(&bv->bv_hd); KASSERT(bp == NULL || bp->b_bufobj == bo, ("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo)); bp = TAILQ_LAST(&bv->bv_hd, buflists); KASSERT(bp == NULL || bp->b_bufobj == bo, ("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo)); #endif VI_UNLOCK(vp); } /* * Increment the use and hold counts on the vnode, taking care to reference * the driver's usecount if this is a chardev. The vholdl() will remove * the vnode from the free list if it is presently free. Requires the * vnode interlock and returns with it held. */ static void v_incr_usecount(struct vnode *vp) { CTR3(KTR_VFS, "v_incr_usecount: vp %p holdcnt %d usecount %d\n", vp, vp->v_holdcnt, vp->v_usecount); vp->v_usecount++; if (vp->v_type == VCHR && vp->v_rdev != NULL) { dev_lock(); vp->v_rdev->si_usecount++; dev_unlock(); } vholdl(vp); } /* * Turn a holdcnt into a use+holdcnt such that only one call to * v_decr_usecount is needed. */ static void v_upgrade_usecount(struct vnode *vp) { CTR3(KTR_VFS, "v_upgrade_usecount: vp %p holdcnt %d usecount %d\n", vp, vp->v_holdcnt, vp->v_usecount); vp->v_usecount++; if (vp->v_type == VCHR && vp->v_rdev != NULL) { dev_lock(); vp->v_rdev->si_usecount++; dev_unlock(); } } /* * Decrement the vnode use and hold count along with the driver's usecount * if this is a chardev. The vdropl() below releases the vnode interlock * as it may free the vnode. */ static void v_decr_usecount(struct vnode *vp) { CTR3(KTR_VFS, "v_decr_usecount: vp %p holdcnt %d usecount %d\n", vp, vp->v_holdcnt, vp->v_usecount); ASSERT_VI_LOCKED(vp, __FUNCTION__); VNASSERT(vp->v_usecount > 0, vp, ("v_decr_usecount: negative usecount")); vp->v_usecount--; if (vp->v_type == VCHR && vp->v_rdev != NULL) { dev_lock(); vp->v_rdev->si_usecount--; dev_unlock(); } vdropl(vp); } /* * Decrement only the use count and driver use count. This is intended to * be paired with a follow on vdropl() to release the remaining hold count. * In this way we may vgone() a vnode with a 0 usecount without risk of * having it end up on a free list because the hold count is kept above 0. */ static void v_decr_useonly(struct vnode *vp) { CTR3(KTR_VFS, "v_decr_useonly: vp %p holdcnt %d usecount %d\n", vp, vp->v_holdcnt, vp->v_usecount); ASSERT_VI_LOCKED(vp, __FUNCTION__); VNASSERT(vp->v_usecount > 0, vp, ("v_decr_useonly: negative usecount")); vp->v_usecount--; if (vp->v_type == VCHR && vp->v_rdev != NULL) { dev_lock(); vp->v_rdev->si_usecount--; dev_unlock(); } } /* * Grab a particular vnode from the free list, increment its * reference count and lock it. The vnode lock bit is set if the * vnode is being eliminated in vgone. The process is awakened * when the transition is completed, and an error returned to * indicate that the vnode is no longer usable (possibly having * been changed to a new filesystem type). */ int vget(struct vnode *vp, int flags, struct thread *td) { int oweinact; int oldflags; int error; error = 0; oldflags = flags; oweinact = 0; VFS_ASSERT_GIANT(vp->v_mount); if ((flags & LK_INTERLOCK) == 0) VI_LOCK(vp); /* * If the inactive call was deferred because vput() was called * with a shared lock, we have to do it here before another thread * gets a reference to data that should be dead. */ if (vp->v_iflag & VI_OWEINACT) { if (flags & LK_NOWAIT) { VI_UNLOCK(vp); return (EBUSY); } flags &= ~LK_TYPE_MASK; flags |= LK_EXCLUSIVE; oweinact = 1; } vholdl(vp); if ((error = vn_lock(vp, flags | LK_INTERLOCK, td)) != 0) { vdrop(vp); return (error); } VI_LOCK(vp); /* Upgrade our holdcnt to a usecount. */ v_upgrade_usecount(vp); if (vp->v_iflag & VI_DOOMED && (flags & LK_RETRY) == 0) panic("vget: vn_lock failed to return ENOENT\n"); if (oweinact) { if (vp->v_iflag & VI_OWEINACT) vinactive(vp, td); VI_UNLOCK(vp); if ((oldflags & LK_TYPE_MASK) == 0) VOP_UNLOCK(vp, 0, td); } else VI_UNLOCK(vp); return (0); } /* * Increase the reference count of a vnode. */ void vref(struct vnode *vp) { VI_LOCK(vp); v_incr_usecount(vp); VI_UNLOCK(vp); } /* * Return reference count of a vnode. * * The results of this call are only guaranteed when some mechanism other * than the VI lock is used to stop other processes from gaining references * to the vnode. This may be the case if the caller holds the only reference. * This is also useful when stale data is acceptable as race conditions may * be accounted for by some other means. */ int vrefcnt(struct vnode *vp) { int usecnt; VI_LOCK(vp); usecnt = vp->v_usecount; VI_UNLOCK(vp); return (usecnt); } /* * Vnode put/release. * If count drops to zero, call inactive routine and return to freelist. */ void vrele(struct vnode *vp) { struct thread *td = curthread; /* XXX */ KASSERT(vp != NULL, ("vrele: null vp")); VFS_ASSERT_GIANT(vp->v_mount); VI_LOCK(vp); /* Skip this v_writecount check if we're going to panic below. */ VNASSERT(vp->v_writecount < vp->v_usecount || vp->v_usecount < 1, vp, ("vrele: missed vn_close")); if (vp->v_usecount > 1 || ((vp->v_iflag & VI_DOINGINACT) && vp->v_usecount == 1)) { v_decr_usecount(vp); return; } if (vp->v_usecount != 1) { #ifdef DIAGNOSTIC vprint("vrele: negative ref count", vp); #endif VI_UNLOCK(vp); panic("vrele: negative ref cnt"); } /* * We want to hold the vnode until the inactive finishes to * prevent vgone() races. We drop the use count here and the * hold count below when we're done. */ v_decr_useonly(vp); /* * We must call VOP_INACTIVE with the node locked. Mark * as VI_DOINGINACT to avoid recursion. */ vp->v_iflag |= VI_OWEINACT; if (vn_lock(vp, LK_EXCLUSIVE | LK_INTERLOCK, td) == 0) { VI_LOCK(vp); if (vp->v_usecount > 0) vp->v_iflag &= ~VI_OWEINACT; if (vp->v_iflag & VI_OWEINACT) vinactive(vp, td); VOP_UNLOCK(vp, 0, td); } else { VI_LOCK(vp); if (vp->v_usecount > 0) vp->v_iflag &= ~VI_OWEINACT; } vdropl(vp); } /* * Release an already locked vnode. This give the same effects as * unlock+vrele(), but takes less time and avoids releasing and * re-aquiring the lock (as vrele() aquires the lock internally.) */ void vput(struct vnode *vp) { struct thread *td = curthread; /* XXX */ int error; KASSERT(vp != NULL, ("vput: null vp")); ASSERT_VOP_LOCKED(vp, "vput"); VFS_ASSERT_GIANT(vp->v_mount); VI_LOCK(vp); /* Skip this v_writecount check if we're going to panic below. */ VNASSERT(vp->v_writecount < vp->v_usecount || vp->v_usecount < 1, vp, ("vput: missed vn_close")); error = 0; if (vp->v_usecount > 1 || ((vp->v_iflag & VI_DOINGINACT) && vp->v_usecount == 1)) { VOP_UNLOCK(vp, 0, td); v_decr_usecount(vp); return; } if (vp->v_usecount != 1) { #ifdef DIAGNOSTIC vprint("vput: negative ref count", vp); #endif panic("vput: negative ref cnt"); } /* * We want to hold the vnode until the inactive finishes to * prevent vgone() races. We drop the use count here and the * hold count below when we're done. */ v_decr_useonly(vp); vp->v_iflag |= VI_OWEINACT; if (VOP_ISLOCKED(vp, NULL) != LK_EXCLUSIVE) { error = VOP_LOCK(vp, LK_EXCLUPGRADE|LK_INTERLOCK|LK_NOWAIT, td); VI_LOCK(vp); if (error) { if (vp->v_usecount > 0) vp->v_iflag &= ~VI_OWEINACT; goto done; } } if (vp->v_usecount > 0) vp->v_iflag &= ~VI_OWEINACT; if (vp->v_iflag & VI_OWEINACT) vinactive(vp, td); VOP_UNLOCK(vp, 0, td); done: vdropl(vp); } /* * Somebody doesn't want the vnode recycled. */ void vhold(struct vnode *vp) { VI_LOCK(vp); vholdl(vp); VI_UNLOCK(vp); } void vholdl(struct vnode *vp) { vp->v_holdcnt++; if (VSHOULDBUSY(vp)) vbusy(vp); } /* * Note that there is one less who cares about this vnode. vdrop() is the * opposite of vhold(). */ void vdrop(struct vnode *vp) { VI_LOCK(vp); vdropl(vp); } /* * Drop the hold count of the vnode. If this is the last reference to * the vnode we will free it if it has been vgone'd otherwise it is * placed on the free list. */ static void vdropl(struct vnode *vp) { if (vp->v_holdcnt <= 0) panic("vdrop: holdcnt %d", vp->v_holdcnt); vp->v_holdcnt--; if (vp->v_holdcnt == 0) { if (vp->v_iflag & VI_DOOMED) { vdestroy(vp); return; } else vfree(vp); } VI_UNLOCK(vp); } /* * Call VOP_INACTIVE on the vnode and manage the DOINGINACT and OWEINACT * flags. DOINGINACT prevents us from recursing in calls to vinactive. * OWEINACT tracks whether a vnode missed a call to inactive due to a * failed lock upgrade. */ static void vinactive(struct vnode *vp, struct thread *td) { ASSERT_VOP_LOCKED(vp, "vinactive"); ASSERT_VI_LOCKED(vp, "vinactive"); VNASSERT((vp->v_iflag & VI_DOINGINACT) == 0, vp, ("vinactive: recursed on VI_DOINGINACT")); vp->v_iflag |= VI_DOINGINACT; vp->v_iflag &= ~VI_OWEINACT; VI_UNLOCK(vp); VOP_INACTIVE(vp, td); VI_LOCK(vp); VNASSERT(vp->v_iflag & VI_DOINGINACT, vp, ("vinactive: lost VI_DOINGINACT")); vp->v_iflag &= ~VI_DOINGINACT; } /* * Remove any vnodes in the vnode table belonging to mount point mp. * * If FORCECLOSE is not specified, there should not be any active ones, * return error if any are found (nb: this is a user error, not a * system error). If FORCECLOSE is specified, detach any active vnodes * that are found. * * If WRITECLOSE is set, only flush out regular file vnodes open for * writing. * * SKIPSYSTEM causes any vnodes marked VV_SYSTEM to be skipped. * * `rootrefs' specifies the base reference count for the root vnode * of this filesystem. The root vnode is considered busy if its * v_usecount exceeds this value. On a successful return, vflush(, td) * will call vrele() on the root vnode exactly rootrefs times. * If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must * be zero. */ #ifdef DIAGNOSTIC static int busyprt = 0; /* print out busy vnodes */ SYSCTL_INT(_debug, OID_AUTO, busyprt, CTLFLAG_RW, &busyprt, 0, ""); #endif int vflush( struct mount *mp, int rootrefs, int flags, struct thread *td) { struct vnode *vp, *mvp, *rootvp = NULL; struct vattr vattr; int busy = 0, error; CTR1(KTR_VFS, "vflush: mp %p", mp); if (rootrefs > 0) { KASSERT((flags & (SKIPSYSTEM | WRITECLOSE)) == 0, ("vflush: bad args")); /* * Get the filesystem root vnode. We can vput() it * immediately, since with rootrefs > 0, it won't go away. */ if ((error = VFS_ROOT(mp, LK_EXCLUSIVE, &rootvp, td)) != 0) return (error); vput(rootvp); } MNT_ILOCK(mp); loop: MNT_VNODE_FOREACH(vp, mp, mvp) { VI_LOCK(vp); vholdl(vp); MNT_IUNLOCK(mp); error = vn_lock(vp, LK_INTERLOCK | LK_EXCLUSIVE, td); if (error) { vdrop(vp); MNT_ILOCK(mp); MNT_VNODE_FOREACH_ABORT_ILOCKED(mp, mvp); goto loop; } /* * Skip over a vnodes marked VV_SYSTEM. */ if ((flags & SKIPSYSTEM) && (vp->v_vflag & VV_SYSTEM)) { VOP_UNLOCK(vp, 0, td); vdrop(vp); MNT_ILOCK(mp); continue; } /* * If WRITECLOSE is set, flush out unlinked but still open * files (even if open only for reading) and regular file * vnodes open for writing. */ if (flags & WRITECLOSE) { error = VOP_GETATTR(vp, &vattr, td->td_ucred, td); VI_LOCK(vp); if ((vp->v_type == VNON || (error == 0 && vattr.va_nlink > 0)) && (vp->v_writecount == 0 || vp->v_type != VREG)) { VOP_UNLOCK(vp, 0, td); vdropl(vp); MNT_ILOCK(mp); continue; } } else VI_LOCK(vp); /* * With v_usecount == 0, all we need to do is clear out the * vnode data structures and we are done. * * If FORCECLOSE is set, forcibly close the vnode. */ if (vp->v_usecount == 0 || (flags & FORCECLOSE)) { VNASSERT(vp->v_usecount == 0 || (vp->v_type != VCHR && vp->v_type != VBLK), vp, ("device VNODE %p is FORCECLOSED", vp)); vgonel(vp); } else { busy++; #ifdef DIAGNOSTIC if (busyprt) vprint("vflush: busy vnode", vp); #endif } VOP_UNLOCK(vp, 0, td); vdropl(vp); MNT_ILOCK(mp); } MNT_IUNLOCK(mp); if (rootrefs > 0 && (flags & FORCECLOSE) == 0) { /* * If just the root vnode is busy, and if its refcount * is equal to `rootrefs', then go ahead and kill it. */ VI_LOCK(rootvp); KASSERT(busy > 0, ("vflush: not busy")); VNASSERT(rootvp->v_usecount >= rootrefs, rootvp, ("vflush: usecount %d < rootrefs %d", rootvp->v_usecount, rootrefs)); if (busy == 1 && rootvp->v_usecount == rootrefs) { VOP_LOCK(rootvp, LK_EXCLUSIVE|LK_INTERLOCK, td); vgone(rootvp); VOP_UNLOCK(rootvp, 0, td); busy = 0; } else VI_UNLOCK(rootvp); } if (busy) return (EBUSY); for (; rootrefs > 0; rootrefs--) vrele(rootvp); return (0); } /* * Recycle an unused vnode to the front of the free list. */ int vrecycle(struct vnode *vp, struct thread *td) { int recycled; ASSERT_VOP_LOCKED(vp, "vrecycle"); recycled = 0; VI_LOCK(vp); if (vp->v_usecount == 0) { recycled = 1; vgonel(vp); } VI_UNLOCK(vp); return (recycled); } /* * Eliminate all activity associated with a vnode * in preparation for reuse. */ void vgone(struct vnode *vp) { VI_LOCK(vp); vgonel(vp); VI_UNLOCK(vp); } /* * vgone, with the vp interlock held. */ void vgonel(struct vnode *vp) { struct thread *td; int oweinact; int active; struct mount *mp; CTR1(KTR_VFS, "vgonel: vp %p", vp); ASSERT_VOP_LOCKED(vp, "vgonel"); ASSERT_VI_LOCKED(vp, "vgonel"); VNASSERT(vp->v_holdcnt, vp, ("vgonel: vp %p has no reference.", vp)); td = curthread; /* * Don't vgonel if we're already doomed. */ if (vp->v_iflag & VI_DOOMED) return; vp->v_iflag |= VI_DOOMED; /* * Check to see if the vnode is in use. If so, we have to call * VOP_CLOSE() and VOP_INACTIVE(). */ active = vp->v_usecount; oweinact = (vp->v_iflag & VI_OWEINACT); VI_UNLOCK(vp); /* * Clean out any buffers associated with the vnode. * If the flush fails, just toss the buffers. */ mp = NULL; if (!TAILQ_EMPTY(&vp->v_bufobj.bo_dirty.bv_hd)) (void) vn_start_secondary_write(vp, &mp, V_WAIT); if (vinvalbuf(vp, V_SAVE, td, 0, 0) != 0) vinvalbuf(vp, 0, td, 0, 0); /* * If purging an active vnode, it must be closed and * deactivated before being reclaimed. */ if (active) VOP_CLOSE(vp, FNONBLOCK, NOCRED, td); if (oweinact || active) { VI_LOCK(vp); if ((vp->v_iflag & VI_DOINGINACT) == 0) vinactive(vp, td); VI_UNLOCK(vp); } /* * Reclaim the vnode. */ if (VOP_RECLAIM(vp, td)) panic("vgone: cannot reclaim"); if (mp != NULL) vn_finished_secondary_write(mp); VNASSERT(vp->v_object == NULL, vp, ("vop_reclaim left v_object vp=%p, tag=%s", vp, vp->v_tag)); /* * Delete from old mount point vnode list. */ delmntque(vp); cache_purge(vp); /* * Done with purge, reset to the standard lock and invalidate * the vnode. */ VI_LOCK(vp); vp->v_vnlock = &vp->v_lock; vp->v_op = &dead_vnodeops; vp->v_tag = "none"; vp->v_type = VBAD; } /* * Calculate the total number of references to a special device. */ int vcount(struct vnode *vp) { int count; dev_lock(); count = vp->v_rdev->si_usecount; dev_unlock(); return (count); } /* * Same as above, but using the struct cdev *as argument */ int count_dev(struct cdev *dev) { int count; dev_lock(); count = dev->si_usecount; dev_unlock(); return(count); } /* * Print out a description of a vnode. */ static char *typename[] = {"VNON", "VREG", "VDIR", "VBLK", "VCHR", "VLNK", "VSOCK", "VFIFO", "VBAD", "VMARKER"}; void vn_printf(struct vnode *vp, const char *fmt, ...) { va_list ap; char buf[96]; va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("%p: ", (void *)vp); printf("tag %s, type %s\n", vp->v_tag, typename[vp->v_type]); printf(" usecount %d, writecount %d, refcount %d mountedhere %p\n", vp->v_usecount, vp->v_writecount, vp->v_holdcnt, vp->v_mountedhere); buf[0] = '\0'; buf[1] = '\0'; if (vp->v_vflag & VV_ROOT) strcat(buf, "|VV_ROOT"); if (vp->v_vflag & VV_TEXT) strcat(buf, "|VV_TEXT"); if (vp->v_vflag & VV_SYSTEM) strcat(buf, "|VV_SYSTEM"); if (vp->v_iflag & VI_DOOMED) strcat(buf, "|VI_DOOMED"); if (vp->v_iflag & VI_FREE) strcat(buf, "|VI_FREE"); printf(" flags (%s)\n", buf + 1); if (mtx_owned(VI_MTX(vp))) printf(" VI_LOCKed"); if (vp->v_object != NULL) printf(" v_object %p ref %d pages %d\n", vp->v_object, vp->v_object->ref_count, vp->v_object->resident_page_count); printf(" "); lockmgr_printinfo(vp->v_vnlock); printf("\n"); if (vp->v_data != NULL) VOP_PRINT(vp); } #ifdef DDB #include /* * List all of the locked vnodes in the system. * Called when debugging the kernel. */ DB_SHOW_COMMAND(lockedvnods, lockedvnodes) { struct mount *mp, *nmp; struct vnode *vp; /* * Note: because this is DDB, we can't obey the locking semantics * for these structures, which means we could catch an inconsistent * state and dereference a nasty pointer. Not much to be done * about that. */ printf("Locked vnodes\n"); for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) { nmp = TAILQ_NEXT(mp, mnt_list); TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) { if (vp->v_type != VMARKER && VOP_ISLOCKED(vp, NULL)) vprint("", vp); } nmp = TAILQ_NEXT(mp, mnt_list); } } #endif /* * Fill in a struct xvfsconf based on a struct vfsconf. */ static void vfsconf2x(struct vfsconf *vfsp, struct xvfsconf *xvfsp) { strcpy(xvfsp->vfc_name, vfsp->vfc_name); xvfsp->vfc_typenum = vfsp->vfc_typenum; xvfsp->vfc_refcount = vfsp->vfc_refcount; xvfsp->vfc_flags = vfsp->vfc_flags; /* * These are unused in userland, we keep them * to not break binary compatibility. */ xvfsp->vfc_vfsops = NULL; xvfsp->vfc_next = NULL; } /* * Top level filesystem related information gathering. */ static int sysctl_vfs_conflist(SYSCTL_HANDLER_ARGS) { struct vfsconf *vfsp; struct xvfsconf xvfsp; int error; error = 0; TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) { bzero(&xvfsp, sizeof(xvfsp)); vfsconf2x(vfsp, &xvfsp); error = SYSCTL_OUT(req, &xvfsp, sizeof xvfsp); if (error) break; } return (error); } SYSCTL_PROC(_vfs, OID_AUTO, conflist, CTLFLAG_RD, NULL, 0, sysctl_vfs_conflist, "S,xvfsconf", "List of all configured filesystems"); #ifndef BURN_BRIDGES static int sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS); static int vfs_sysctl(SYSCTL_HANDLER_ARGS) { int *name = (int *)arg1 - 1; /* XXX */ u_int namelen = arg2 + 1; /* XXX */ struct vfsconf *vfsp; struct xvfsconf xvfsp; printf("WARNING: userland calling deprecated sysctl, " "please rebuild world\n"); #if 1 || defined(COMPAT_PRELITE2) /* Resolve ambiguity between VFS_VFSCONF and VFS_GENERIC. */ if (namelen == 1) return (sysctl_ovfs_conf(oidp, arg1, arg2, req)); #endif switch (name[1]) { case VFS_MAXTYPENUM: if (namelen != 2) return (ENOTDIR); return (SYSCTL_OUT(req, &maxvfsconf, sizeof(int))); case VFS_CONF: if (namelen != 3) return (ENOTDIR); /* overloaded */ TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) if (vfsp->vfc_typenum == name[2]) break; if (vfsp == NULL) return (EOPNOTSUPP); bzero(&xvfsp, sizeof(xvfsp)); vfsconf2x(vfsp, &xvfsp); return (SYSCTL_OUT(req, &xvfsp, sizeof(xvfsp))); } return (EOPNOTSUPP); } static SYSCTL_NODE(_vfs, VFS_GENERIC, generic, CTLFLAG_RD | CTLFLAG_SKIP, vfs_sysctl, "Generic filesystem"); #if 1 || defined(COMPAT_PRELITE2) static int sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS) { int error; struct vfsconf *vfsp; struct ovfsconf ovfs; TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) { bzero(&ovfs, sizeof(ovfs)); ovfs.vfc_vfsops = vfsp->vfc_vfsops; /* XXX used as flag */ strcpy(ovfs.vfc_name, vfsp->vfc_name); ovfs.vfc_index = vfsp->vfc_typenum; ovfs.vfc_refcount = vfsp->vfc_refcount; ovfs.vfc_flags = vfsp->vfc_flags; error = SYSCTL_OUT(req, &ovfs, sizeof ovfs); if (error) return error; } return 0; } #endif /* 1 || COMPAT_PRELITE2 */ #endif /* !BURN_BRIDGES */ #define KINFO_VNODESLOP 10 #ifdef notyet /* * Dump vnode list (via sysctl). */ /* ARGSUSED */ static int sysctl_vnode(SYSCTL_HANDLER_ARGS) { struct xvnode *xvn; struct thread *td = req->td; struct mount *mp; struct vnode *vp; int error, len, n; /* * Stale numvnodes access is not fatal here. */ req->lock = 0; len = (numvnodes + KINFO_VNODESLOP) * sizeof *xvn; if (!req->oldptr) /* Make an estimate */ return (SYSCTL_OUT(req, 0, len)); error = sysctl_wire_old_buffer(req, 0); if (error != 0) return (error); xvn = malloc(len, M_TEMP, M_ZERO | M_WAITOK); n = 0; mtx_lock(&mountlist_mtx); TAILQ_FOREACH(mp, &mountlist, mnt_list) { if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td)) continue; MNT_ILOCK(mp); TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) { if (n == len) break; vref(vp); xvn[n].xv_size = sizeof *xvn; xvn[n].xv_vnode = vp; xvn[n].xv_id = 0; /* XXX compat */ #define XV_COPY(field) xvn[n].xv_##field = vp->v_##field XV_COPY(usecount); XV_COPY(writecount); XV_COPY(holdcnt); XV_COPY(mount); XV_COPY(numoutput); XV_COPY(type); #undef XV_COPY xvn[n].xv_flag = vp->v_vflag; switch (vp->v_type) { case VREG: case VDIR: case VLNK: break; case VBLK: case VCHR: if (vp->v_rdev == NULL) { vrele(vp); continue; } xvn[n].xv_dev = dev2udev(vp->v_rdev); break; case VSOCK: xvn[n].xv_socket = vp->v_socket; break; case VFIFO: xvn[n].xv_fifo = vp->v_fifoinfo; break; case VNON: case VBAD: default: /* shouldn't happen? */ vrele(vp); continue; } vrele(vp); ++n; } MNT_IUNLOCK(mp); mtx_lock(&mountlist_mtx); vfs_unbusy(mp, td); if (n == len) break; } mtx_unlock(&mountlist_mtx); error = SYSCTL_OUT(req, xvn, n * sizeof *xvn); free(xvn, M_TEMP); return (error); } SYSCTL_PROC(_kern, KERN_VNODE, vnode, CTLTYPE_OPAQUE|CTLFLAG_RD, 0, 0, sysctl_vnode, "S,xvnode", ""); #endif /* * Unmount all filesystems. The list is traversed in reverse order * of mounting to avoid dependencies. */ void vfs_unmountall(void) { struct mount *mp; struct thread *td; int error; KASSERT(curthread != NULL, ("vfs_unmountall: NULL curthread")); td = curthread; /* * Since this only runs when rebooting, it is not interlocked. */ while(!TAILQ_EMPTY(&mountlist)) { mp = TAILQ_LAST(&mountlist, mntlist); error = dounmount(mp, MNT_FORCE, td); if (error) { TAILQ_REMOVE(&mountlist, mp, mnt_list); /* * XXX: Due to the way in which we mount the root * file system off of devfs, devfs will generate a * "busy" warning when we try to unmount it before * the root. Don't print a warning as a result in * order to avoid false positive errors that may * cause needless upset. */ if (strcmp(mp->mnt_vfc->vfc_name, "devfs") != 0) { printf("unmount of %s failed (", mp->mnt_stat.f_mntonname); if (error == EBUSY) printf("BUSY)\n"); else printf("%d)\n", error); } } else { /* The unmount has removed mp from the mountlist */ } } } /* * perform msync on all vnodes under a mount point * the mount point must be locked. */ void vfs_msync(struct mount *mp, int flags) { struct vnode *vp, *mvp; struct vm_object *obj; MNT_ILOCK(mp); MNT_VNODE_FOREACH(vp, mp, mvp) { VI_LOCK(vp); if ((vp->v_iflag & VI_OBJDIRTY) && (flags == MNT_WAIT || VOP_ISLOCKED(vp, NULL) == 0)) { MNT_IUNLOCK(mp); if (!vget(vp, LK_EXCLUSIVE | LK_RETRY | LK_INTERLOCK, curthread)) { if (vp->v_vflag & VV_NOSYNC) { /* unlinked */ vput(vp); MNT_ILOCK(mp); continue; } obj = vp->v_object; if (obj != NULL) { VM_OBJECT_LOCK(obj); vm_object_page_clean(obj, 0, 0, flags == MNT_WAIT ? OBJPC_SYNC : OBJPC_NOSYNC); VM_OBJECT_UNLOCK(obj); } vput(vp); } MNT_ILOCK(mp); } else VI_UNLOCK(vp); } MNT_IUNLOCK(mp); } /* * Mark a vnode as free, putting it up for recycling. */ static void vfree(struct vnode *vp) { CTR1(KTR_VFS, "vfree vp %p", vp); ASSERT_VI_LOCKED(vp, "vfree"); mtx_lock(&vnode_free_list_mtx); VNASSERT(vp->v_op != NULL, vp, ("vfree: vnode already reclaimed.")); VNASSERT((vp->v_iflag & VI_FREE) == 0, vp, ("vnode already free")); VNASSERT(VSHOULDFREE(vp), vp, ("vfree: freeing when we shouldn't")); VNASSERT((vp->v_iflag & VI_DOOMED) == 0, vp, ("vfree: Freeing doomed vnode")); if (vp->v_iflag & VI_AGE) { TAILQ_INSERT_HEAD(&vnode_free_list, vp, v_freelist); } else { TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist); } freevnodes++; vp->v_iflag &= ~VI_AGE; vp->v_iflag |= VI_FREE; mtx_unlock(&vnode_free_list_mtx); } /* * Opposite of vfree() - mark a vnode as in use. */ static void vbusy(struct vnode *vp) { CTR1(KTR_VFS, "vbusy vp %p", vp); ASSERT_VI_LOCKED(vp, "vbusy"); VNASSERT((vp->v_iflag & VI_FREE) != 0, vp, ("vnode not free")); VNASSERT(vp->v_op != NULL, vp, ("vbusy: vnode already reclaimed.")); mtx_lock(&vnode_free_list_mtx); TAILQ_REMOVE(&vnode_free_list, vp, v_freelist); freevnodes--; vp->v_iflag &= ~(VI_FREE|VI_AGE); mtx_unlock(&vnode_free_list_mtx); } /* * Initalize per-vnode helper structure to hold poll-related state. */ void v_addpollinfo(struct vnode *vp) { struct vpollinfo *vi; vi = uma_zalloc(vnodepoll_zone, M_WAITOK); if (vp->v_pollinfo != NULL) { uma_zfree(vnodepoll_zone, vi); return; } vp->v_pollinfo = vi; mtx_init(&vp->v_pollinfo->vpi_lock, "vnode pollinfo", NULL, MTX_DEF); knlist_init(&vp->v_pollinfo->vpi_selinfo.si_note, vp, vfs_knllock, vfs_knlunlock, vfs_knllocked); } /* * Record a process's interest in events which might happen to * a vnode. Because poll uses the historic select-style interface * internally, this routine serves as both the ``check for any * pending events'' and the ``record my interest in future events'' * functions. (These are done together, while the lock is held, * to avoid race conditions.) */ int vn_pollrecord(struct vnode *vp, struct thread *td, int events) { if (vp->v_pollinfo == NULL) v_addpollinfo(vp); mtx_lock(&vp->v_pollinfo->vpi_lock); if (vp->v_pollinfo->vpi_revents & events) { /* * This leaves events we are not interested * in available for the other process which * which presumably had requested them * (otherwise they would never have been * recorded). */ events &= vp->v_pollinfo->vpi_revents; vp->v_pollinfo->vpi_revents &= ~events; mtx_unlock(&vp->v_pollinfo->vpi_lock); return events; } vp->v_pollinfo->vpi_events |= events; selrecord(td, &vp->v_pollinfo->vpi_selinfo); mtx_unlock(&vp->v_pollinfo->vpi_lock); return 0; } /* * Routine to create and manage a filesystem syncer vnode. */ #define sync_close ((int (*)(struct vop_close_args *))nullop) static int sync_fsync(struct vop_fsync_args *); static int sync_inactive(struct vop_inactive_args *); static int sync_reclaim(struct vop_reclaim_args *); static struct vop_vector sync_vnodeops = { .vop_bypass = VOP_EOPNOTSUPP, .vop_close = sync_close, /* close */ .vop_fsync = sync_fsync, /* fsync */ .vop_inactive = sync_inactive, /* inactive */ .vop_reclaim = sync_reclaim, /* reclaim */ .vop_lock = vop_stdlock, /* lock */ .vop_unlock = vop_stdunlock, /* unlock */ .vop_islocked = vop_stdislocked, /* islocked */ }; /* * Create a new filesystem syncer vnode for the specified mount point. */ int vfs_allocate_syncvnode(struct mount *mp) { struct vnode *vp; static long start, incr, next; int error; /* Allocate a new vnode */ if ((error = getnewvnode("syncer", mp, &sync_vnodeops, &vp)) != 0) { mp->mnt_syncer = NULL; return (error); } vp->v_type = VNON; /* * Place the vnode onto the syncer worklist. We attempt to * scatter them about on the list so that they will go off * at evenly distributed times even if all the filesystems * are mounted at once. */ next += incr; if (next == 0 || next > syncer_maxdelay) { start /= 2; incr /= 2; if (start == 0) { start = syncer_maxdelay / 2; incr = syncer_maxdelay; } next = start; } VI_LOCK(vp); vn_syncer_add_to_worklist(&vp->v_bufobj, syncdelay > 0 ? next % syncdelay : 0); /* XXX - vn_syncer_add_to_worklist() also grabs and drops sync_mtx. */ mtx_lock(&sync_mtx); sync_vnode_count++; mtx_unlock(&sync_mtx); VI_UNLOCK(vp); mp->mnt_syncer = vp; return (0); } /* * Do a lazy sync of the filesystem. */ static int sync_fsync(struct vop_fsync_args *ap) { struct vnode *syncvp = ap->a_vp; struct mount *mp = syncvp->v_mount; struct thread *td = ap->a_td; int error, asyncflag; struct bufobj *bo; /* * We only need to do something if this is a lazy evaluation. */ if (ap->a_waitfor != MNT_LAZY) return (0); /* * Move ourselves to the back of the sync list. */ bo = &syncvp->v_bufobj; BO_LOCK(bo); vn_syncer_add_to_worklist(bo, syncdelay); BO_UNLOCK(bo); /* * Walk the list of vnodes pushing all that are dirty and * not already on the sync list. */ mtx_lock(&mountlist_mtx); if (vfs_busy(mp, LK_EXCLUSIVE | LK_NOWAIT, &mountlist_mtx, td) != 0) { mtx_unlock(&mountlist_mtx); return (0); } if (vn_start_write(NULL, &mp, V_NOWAIT) != 0) { vfs_unbusy(mp, td); return (0); } asyncflag = mp->mnt_flag & MNT_ASYNC; mp->mnt_flag &= ~MNT_ASYNC; vfs_msync(mp, MNT_NOWAIT); error = VFS_SYNC(mp, MNT_LAZY, td); if (asyncflag) mp->mnt_flag |= MNT_ASYNC; vn_finished_write(mp); vfs_unbusy(mp, td); return (error); } /* * The syncer vnode is no referenced. */ static int sync_inactive(struct vop_inactive_args *ap) { vgone(ap->a_vp); return (0); } /* * The syncer vnode is no longer needed and is being decommissioned. * * Modifications to the worklist must be protected by sync_mtx. */ static int sync_reclaim(struct vop_reclaim_args *ap) { struct vnode *vp = ap->a_vp; struct bufobj *bo; VI_LOCK(vp); bo = &vp->v_bufobj; vp->v_mount->mnt_syncer = NULL; if (bo->bo_flag & BO_ONWORKLST) { mtx_lock(&sync_mtx); LIST_REMOVE(bo, bo_synclist); syncer_worklist_len--; sync_vnode_count--; mtx_unlock(&sync_mtx); bo->bo_flag &= ~BO_ONWORKLST; } VI_UNLOCK(vp); return (0); } /* * Check if vnode represents a disk device */ int vn_isdisk(struct vnode *vp, int *errp) { int error; error = 0; dev_lock(); if (vp->v_type != VCHR) error = ENOTBLK; else if (vp->v_rdev == NULL) error = ENXIO; else if (vp->v_rdev->si_devsw == NULL) error = ENXIO; else if (!(vp->v_rdev->si_devsw->d_flags & D_DISK)) error = ENOTBLK; dev_unlock(); if (errp != NULL) *errp = error; return (error == 0); } /* * Common filesystem object access control check routine. Accepts a * vnode's type, "mode", uid and gid, requested access mode, credentials, * and optional call-by-reference privused argument allowing vaccess() * to indicate to the caller whether privilege was used to satisfy the * request (obsoleted). Returns 0 on success, or an errno on failure. */ int vaccess(enum vtype type, mode_t file_mode, uid_t file_uid, gid_t file_gid, mode_t acc_mode, struct ucred *cred, int *privused) { mode_t dac_granted; #ifdef CAPABILITIES mode_t cap_granted; #endif /* * Look for a normal, non-privileged way to access the file/directory * as requested. If it exists, go with that. */ if (privused != NULL) *privused = 0; dac_granted = 0; /* Check the owner. */ if (cred->cr_uid == file_uid) { dac_granted |= VADMIN; if (file_mode & S_IXUSR) dac_granted |= VEXEC; if (file_mode & S_IRUSR) dac_granted |= VREAD; if (file_mode & S_IWUSR) dac_granted |= (VWRITE | VAPPEND); if ((acc_mode & dac_granted) == acc_mode) return (0); goto privcheck; } - -#ifdef COMMONID - /* If the common UID/GID is enabled, check the user agains the - * file GID and groups against file UID - */ - if (commonid.enabled) { - if (commonid.low < MINCOMMONID) - commonid.low = MINCOMMONID; - - if (cred->cr_uid == file_gid - && file_gid >= commonid.low && file_gid <= commonid.high) { - /* no VADMIN in this case */ - if (file_mode & S_IXGRP) - dac_granted |= VEXEC; - if (file_mode & S_IRGRP) - dac_granted |= VREAD; - if (file_mode & S_IWGRP) - dac_granted |= (VWRITE | VAPPEND); - - if ((acc_mode & dac_granted) == acc_mode) - return (0); - - goto privcheck; - } - if (file_uid >= commonid.low && file_uid <= commonid.high - && groupmember(file_uid, cred)) { - /* no VADMIN in this case */ - if (file_mode & S_IXUSR) - dac_granted |= VEXEC; - if (file_mode & S_IRUSR) - dac_granted |= VREAD; - if (file_mode & S_IWUSR) - dac_granted |= (VWRITE | VAPPEND); - - if ((acc_mode & dac_granted) == acc_mode) - return (0); - - goto privcheck; - } - } -#endif /* COMMONID */ /* Otherwise, check the groups (first match) */ if (groupmember(file_gid, cred)) { if (file_mode & S_IXGRP) dac_granted |= VEXEC; if (file_mode & S_IRGRP) dac_granted |= VREAD; if (file_mode & S_IWGRP) dac_granted |= (VWRITE | VAPPEND); if ((acc_mode & dac_granted) == acc_mode) return (0); goto privcheck; } /* Otherwise, check everyone else. */ if (file_mode & S_IXOTH) dac_granted |= VEXEC; if (file_mode & S_IROTH) dac_granted |= VREAD; if (file_mode & S_IWOTH) dac_granted |= (VWRITE | VAPPEND); if ((acc_mode & dac_granted) == acc_mode) return (0); privcheck: if (!suser_cred(cred, SUSER_ALLOWJAIL)) { /* XXX audit: privilege used */ if (privused != NULL) *privused = 1; return (0); } #ifdef CAPABILITIES /* * Build a capability mask to determine if the set of capabilities * satisfies the requirements when combined with the granted mask * from above. * For each capability, if the capability is required, bitwise * or the request type onto the cap_granted mask. */ cap_granted = 0; if (type == VDIR) { /* * For directories, use CAP_DAC_READ_SEARCH to satisfy * VEXEC requests, instead of CAP_DAC_EXECUTE. */ if ((acc_mode & VEXEC) && ((dac_granted & VEXEC) == 0) && !cap_check(cred, NULL, CAP_DAC_READ_SEARCH, SUSER_ALLOWJAIL)) cap_granted |= VEXEC; } else { if ((acc_mode & VEXEC) && ((dac_granted & VEXEC) == 0) && !cap_check(cred, NULL, CAP_DAC_EXECUTE, SUSER_ALLOWJAIL)) cap_granted |= VEXEC; } if ((acc_mode & VREAD) && ((dac_granted & VREAD) == 0) && !cap_check(cred, NULL, CAP_DAC_READ_SEARCH, SUSER_ALLOWJAIL)) cap_granted |= VREAD; if ((acc_mode & VWRITE) && ((dac_granted & VWRITE) == 0) && !cap_check(cred, NULL, CAP_DAC_WRITE, SUSER_ALLOWJAIL)) cap_granted |= (VWRITE | VAPPEND); if ((acc_mode & VADMIN) && ((dac_granted & VADMIN) == 0) && !cap_check(cred, NULL, CAP_FOWNER, SUSER_ALLOWJAIL)) cap_granted |= VADMIN; if ((acc_mode & (cap_granted | dac_granted)) == acc_mode) { /* XXX audit: privilege used */ if (privused != NULL) *privused = 1; return (0); } #endif return ((acc_mode & VADMIN) ? EPERM : EACCES); } /* * Credential check based on process requesting service, and per-attribute * permissions. */ int extattr_check_cred(struct vnode *vp, int attrnamespace, struct ucred *cred, struct thread *td, int access) { /* * Kernel-invoked always succeeds. */ if (cred == NOCRED) return (0); /* * Do not allow privileged processes in jail to directly * manipulate system attributes. * * XXX What capability should apply here? * Probably CAP_SYS_SETFFLAG. */ switch (attrnamespace) { case EXTATTR_NAMESPACE_SYSTEM: /* Potentially should be: return (EPERM); */ return (suser_cred(cred, 0)); case EXTATTR_NAMESPACE_USER: return (VOP_ACCESS(vp, access, cred, td)); default: return (EPERM); } } #ifdef DEBUG_VFS_LOCKS /* * This only exists to supress warnings from unlocked specfs accesses. It is * no longer ok to have an unlocked VFS. */ #define IGNORE_LOCK(vp) ((vp)->v_type == VCHR || (vp)->v_type == VBAD) int vfs_badlock_ddb = 1; /* Drop into debugger on violation. */ SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_ddb, CTLFLAG_RW, &vfs_badlock_ddb, 0, ""); int vfs_badlock_mutex = 1; /* Check for interlock across VOPs. */ SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_mutex, CTLFLAG_RW, &vfs_badlock_mutex, 0, ""); int vfs_badlock_print = 1; /* Print lock violations. */ SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_print, CTLFLAG_RW, &vfs_badlock_print, 0, ""); #ifdef KDB int vfs_badlock_backtrace = 1; /* Print backtrace at lock violations. */ SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_backtrace, CTLFLAG_RW, &vfs_badlock_backtrace, 0, ""); #endif static void vfs_badlock(const char *msg, const char *str, struct vnode *vp) { #ifdef KDB if (vfs_badlock_backtrace) kdb_backtrace(); #endif if (vfs_badlock_print) printf("%s: %p %s\n", str, (void *)vp, msg); if (vfs_badlock_ddb) kdb_enter("lock violation"); } void assert_vi_locked(struct vnode *vp, const char *str) { if (vfs_badlock_mutex && !mtx_owned(VI_MTX(vp))) vfs_badlock("interlock is not locked but should be", str, vp); } void assert_vi_unlocked(struct vnode *vp, const char *str) { if (vfs_badlock_mutex && mtx_owned(VI_MTX(vp))) vfs_badlock("interlock is locked but should not be", str, vp); } void assert_vop_locked(struct vnode *vp, const char *str) { if (vp && !IGNORE_LOCK(vp) && VOP_ISLOCKED(vp, NULL) == 0) vfs_badlock("is not locked but should be", str, vp); } void assert_vop_unlocked(struct vnode *vp, const char *str) { if (vp && !IGNORE_LOCK(vp) && VOP_ISLOCKED(vp, curthread) == LK_EXCLUSIVE) vfs_badlock("is locked but should not be", str, vp); } void assert_vop_elocked(struct vnode *vp, const char *str) { if (vp && !IGNORE_LOCK(vp) && VOP_ISLOCKED(vp, curthread) != LK_EXCLUSIVE) vfs_badlock("is not exclusive locked but should be", str, vp); } #if 0 void assert_vop_elocked_other(struct vnode *vp, const char *str) { if (vp && !IGNORE_LOCK(vp) && VOP_ISLOCKED(vp, curthread) != LK_EXCLOTHER) vfs_badlock("is not exclusive locked by another thread", str, vp); } void assert_vop_slocked(struct vnode *vp, const char *str) { if (vp && !IGNORE_LOCK(vp) && VOP_ISLOCKED(vp, curthread) != LK_SHARED) vfs_badlock("is not locked shared but should be", str, vp); } #endif /* 0 */ #endif /* DEBUG_VFS_LOCKS */ void vop_rename_pre(void *ap) { struct vop_rename_args *a = ap; #ifdef DEBUG_VFS_LOCKS if (a->a_tvp) ASSERT_VI_UNLOCKED(a->a_tvp, "VOP_RENAME"); ASSERT_VI_UNLOCKED(a->a_tdvp, "VOP_RENAME"); ASSERT_VI_UNLOCKED(a->a_fvp, "VOP_RENAME"); ASSERT_VI_UNLOCKED(a->a_fdvp, "VOP_RENAME"); /* Check the source (from). */ if (a->a_tdvp != a->a_fdvp && a->a_tvp != a->a_fdvp) ASSERT_VOP_UNLOCKED(a->a_fdvp, "vop_rename: fdvp locked"); if (a->a_tvp != a->a_fvp) ASSERT_VOP_UNLOCKED(a->a_fvp, "vop_rename: tvp locked"); /* Check the target. */ if (a->a_tvp) ASSERT_VOP_LOCKED(a->a_tvp, "vop_rename: tvp not locked"); ASSERT_VOP_LOCKED(a->a_tdvp, "vop_rename: tdvp not locked"); #endif if (a->a_tdvp != a->a_fdvp) vhold(a->a_fdvp); if (a->a_tvp != a->a_fvp) vhold(a->a_fvp); vhold(a->a_tdvp); if (a->a_tvp) vhold(a->a_tvp); } void vop_strategy_pre(void *ap) { #ifdef DEBUG_VFS_LOCKS struct vop_strategy_args *a; struct buf *bp; a = ap; bp = a->a_bp; /* * Cluster ops lock their component buffers but not the IO container. */ if ((bp->b_flags & B_CLUSTER) != 0) return; if (BUF_REFCNT(bp) < 1) { if (vfs_badlock_print) printf( "VOP_STRATEGY: bp is not locked but should be\n"); if (vfs_badlock_ddb) kdb_enter("lock violation"); } #endif } void vop_lookup_pre(void *ap) { #ifdef DEBUG_VFS_LOCKS struct vop_lookup_args *a; struct vnode *dvp; a = ap; dvp = a->a_dvp; ASSERT_VI_UNLOCKED(dvp, "VOP_LOOKUP"); ASSERT_VOP_LOCKED(dvp, "VOP_LOOKUP"); #endif } void vop_lookup_post(void *ap, int rc) { #ifdef DEBUG_VFS_LOCKS struct vop_lookup_args *a; struct vnode *dvp; struct vnode *vp; a = ap; dvp = a->a_dvp; vp = *(a->a_vpp); ASSERT_VI_UNLOCKED(dvp, "VOP_LOOKUP"); ASSERT_VOP_LOCKED(dvp, "VOP_LOOKUP"); if (!rc) ASSERT_VOP_LOCKED(vp, "VOP_LOOKUP (child)"); #endif } void vop_lock_pre(void *ap) { #ifdef DEBUG_VFS_LOCKS struct vop_lock_args *a = ap; if ((a->a_flags & LK_INTERLOCK) == 0) ASSERT_VI_UNLOCKED(a->a_vp, "VOP_LOCK"); else ASSERT_VI_LOCKED(a->a_vp, "VOP_LOCK"); #endif } void vop_lock_post(void *ap, int rc) { #ifdef DEBUG_VFS_LOCKS struct vop_lock_args *a = ap; ASSERT_VI_UNLOCKED(a->a_vp, "VOP_LOCK"); if (rc == 0) ASSERT_VOP_LOCKED(a->a_vp, "VOP_LOCK"); #endif } void vop_unlock_pre(void *ap) { #ifdef DEBUG_VFS_LOCKS struct vop_unlock_args *a = ap; if (a->a_flags & LK_INTERLOCK) ASSERT_VI_LOCKED(a->a_vp, "VOP_UNLOCK"); ASSERT_VOP_LOCKED(a->a_vp, "VOP_UNLOCK"); #endif } void vop_unlock_post(void *ap, int rc) { #ifdef DEBUG_VFS_LOCKS struct vop_unlock_args *a = ap; if (a->a_flags & LK_INTERLOCK) ASSERT_VI_UNLOCKED(a->a_vp, "VOP_UNLOCK"); #endif } void vop_create_post(void *ap, int rc) { struct vop_create_args *a = ap; if (!rc) VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE); } void vop_link_post(void *ap, int rc) { struct vop_link_args *a = ap; if (!rc) { VFS_KNOTE_LOCKED(a->a_vp, NOTE_LINK); VFS_KNOTE_LOCKED(a->a_tdvp, NOTE_WRITE); } } void vop_mkdir_post(void *ap, int rc) { struct vop_mkdir_args *a = ap; if (!rc) VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE | NOTE_LINK); } void vop_mknod_post(void *ap, int rc) { struct vop_mknod_args *a = ap; if (!rc) VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE); } void vop_remove_post(void *ap, int rc) { struct vop_remove_args *a = ap; if (!rc) { VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE); VFS_KNOTE_LOCKED(a->a_vp, NOTE_DELETE); } } void vop_rename_post(void *ap, int rc) { struct vop_rename_args *a = ap; if (!rc) { VFS_KNOTE_UNLOCKED(a->a_fdvp, NOTE_WRITE); VFS_KNOTE_UNLOCKED(a->a_tdvp, NOTE_WRITE); VFS_KNOTE_UNLOCKED(a->a_fvp, NOTE_RENAME); if (a->a_tvp) VFS_KNOTE_UNLOCKED(a->a_tvp, NOTE_DELETE); } if (a->a_tdvp != a->a_fdvp) vdrop(a->a_fdvp); if (a->a_tvp != a->a_fvp) vdrop(a->a_fvp); vdrop(a->a_tdvp); if (a->a_tvp) vdrop(a->a_tvp); } void vop_rmdir_post(void *ap, int rc) { struct vop_rmdir_args *a = ap; if (!rc) { VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE | NOTE_LINK); VFS_KNOTE_LOCKED(a->a_vp, NOTE_DELETE); } } void vop_setattr_post(void *ap, int rc) { struct vop_setattr_args *a = ap; if (!rc) VFS_KNOTE_LOCKED(a->a_vp, NOTE_ATTRIB); } void vop_symlink_post(void *ap, int rc) { struct vop_symlink_args *a = ap; if (!rc) VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE); } static struct knlist fs_knlist; static void vfs_event_init(void *arg) { knlist_init(&fs_knlist, NULL, NULL, NULL, NULL); } /* XXX - correct order? */ SYSINIT(vfs_knlist, SI_SUB_VFS, SI_ORDER_ANY, vfs_event_init, NULL); void vfs_event_signal(fsid_t *fsid, u_int32_t event, intptr_t data __unused) { KNOTE_UNLOCKED(&fs_knlist, event); } static int filt_fsattach(struct knote *kn); static void filt_fsdetach(struct knote *kn); static int filt_fsevent(struct knote *kn, long hint); struct filterops fs_filtops = { 0, filt_fsattach, filt_fsdetach, filt_fsevent }; static int filt_fsattach(struct knote *kn) { kn->kn_flags |= EV_CLEAR; knlist_add(&fs_knlist, kn, 0); return (0); } static void filt_fsdetach(struct knote *kn) { knlist_remove(&fs_knlist, kn, 0); } static int filt_fsevent(struct knote *kn, long hint) { kn->kn_fflags |= hint; return (kn->kn_fflags != 0); } static int sysctl_vfs_ctl(SYSCTL_HANDLER_ARGS) { struct vfsidctl vc; int error; struct mount *mp; error = SYSCTL_IN(req, &vc, sizeof(vc)); if (error) return (error); if (vc.vc_vers != VFS_CTL_VERS1) return (EINVAL); mp = vfs_getvfs(&vc.vc_fsid); if (mp == NULL) return (ENOENT); /* ensure that a specific sysctl goes to the right filesystem. */ if (strcmp(vc.vc_fstypename, "*") != 0 && strcmp(vc.vc_fstypename, mp->mnt_vfc->vfc_name) != 0) { vfs_rel(mp); return (EINVAL); } VCTLTOREQ(&vc, req); error = VFS_SYSCTL(mp, vc.vc_op, req); vfs_rel(mp); return (error); } SYSCTL_PROC(_vfs, OID_AUTO, ctl, CTLFLAG_WR, NULL, 0, sysctl_vfs_ctl, "", "Sysctl by fsid"); /* * Function to initialize a va_filerev field sensibly. * XXX: Wouldn't a random number make a lot more sense ?? */ u_quad_t init_va_filerev(void) { struct bintime bt; getbinuptime(&bt); return (((u_quad_t)bt.sec << 32LL) | (bt.frac >> 32LL)); } static int filt_vfsread(struct knote *kn, long hint); static int filt_vfswrite(struct knote *kn, long hint); static int filt_vfsvnode(struct knote *kn, long hint); static void filt_vfsdetach(struct knote *kn); static struct filterops vfsread_filtops = { 1, NULL, filt_vfsdetach, filt_vfsread }; static struct filterops vfswrite_filtops = { 1, NULL, filt_vfsdetach, filt_vfswrite }; static struct filterops vfsvnode_filtops = { 1, NULL, filt_vfsdetach, filt_vfsvnode }; static void vfs_knllock(void *arg) { struct vnode *vp = arg; vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, curthread); } static void vfs_knlunlock(void *arg) { struct vnode *vp = arg; VOP_UNLOCK(vp, 0, curthread); } static int vfs_knllocked(void *arg) { struct vnode *vp = arg; return (VOP_ISLOCKED(vp, curthread) == LK_EXCLUSIVE); } int vfs_kqfilter(struct vop_kqfilter_args *ap) { struct vnode *vp = ap->a_vp; struct knote *kn = ap->a_kn; struct knlist *knl; switch (kn->kn_filter) { case EVFILT_READ: kn->kn_fop = &vfsread_filtops; break; case EVFILT_WRITE: kn->kn_fop = &vfswrite_filtops; break; case EVFILT_VNODE: kn->kn_fop = &vfsvnode_filtops; break; default: return (EINVAL); } kn->kn_hook = (caddr_t)vp; if (vp->v_pollinfo == NULL) v_addpollinfo(vp); if (vp->v_pollinfo == NULL) return (ENOMEM); knl = &vp->v_pollinfo->vpi_selinfo.si_note; knlist_add(knl, kn, 0); return (0); } /* * Detach knote from vnode */ static void filt_vfsdetach(struct knote *kn) { struct vnode *vp = (struct vnode *)kn->kn_hook; KASSERT(vp->v_pollinfo != NULL, ("Missing v_pollinfo")); knlist_remove(&vp->v_pollinfo->vpi_selinfo.si_note, kn, 0); } /*ARGSUSED*/ static int filt_vfsread(struct knote *kn, long hint) { struct vnode *vp = (struct vnode *)kn->kn_hook; struct vattr va; /* * filesystem is gone, so set the EOF flag and schedule * the knote for deletion. */ if (hint == NOTE_REVOKE) { kn->kn_flags |= (EV_EOF | EV_ONESHOT); return (1); } if (VOP_GETATTR(vp, &va, curthread->td_ucred, curthread)) return (0); kn->kn_data = va.va_size - kn->kn_fp->f_offset; return (kn->kn_data != 0); } /*ARGSUSED*/ static int filt_vfswrite(struct knote *kn, long hint) { /* * filesystem is gone, so set the EOF flag and schedule * the knote for deletion. */ if (hint == NOTE_REVOKE) kn->kn_flags |= (EV_EOF | EV_ONESHOT); kn->kn_data = 0; return (1); } static int filt_vfsvnode(struct knote *kn, long hint) { if (kn->kn_sfflags & hint) kn->kn_fflags |= hint; if (hint == NOTE_REVOKE) { kn->kn_flags |= EV_EOF; return (1); } return (kn->kn_fflags != 0); } int vfs_read_dirent(struct vop_readdir_args *ap, struct dirent *dp, off_t off) { int error; if (dp->d_reclen > ap->a_uio->uio_resid) return (ENAMETOOLONG); error = uiomove(dp, dp->d_reclen, ap->a_uio); if (error) { if (ap->a_ncookies != NULL) { if (ap->a_cookies != NULL) free(ap->a_cookies, M_TEMP); ap->a_cookies = NULL; *ap->a_ncookies = 0; } return (error); } if (ap->a_ncookies == NULL) return (0); KASSERT(ap->a_cookies, ("NULL ap->a_cookies value with non-NULL ap->a_ncookies!")); *ap->a_cookies = realloc(*ap->a_cookies, (*ap->a_ncookies + 1) * sizeof(u_long), M_TEMP, M_WAITOK | M_ZERO); (*ap->a_cookies)[*ap->a_ncookies] = off; return (0); } /* * Mark for update the access time of the file if the filesystem * supports VA_MARK_ATIME. This functionality is used by execve * and mmap, so we want to avoid the synchronous I/O implied by * directly setting va_atime for the sake of efficiency. */ void vfs_mark_atime(struct vnode *vp, struct thread *td) { struct vattr atimeattr; if ((vp->v_mount->mnt_flag & (MNT_NOATIME | MNT_RDONLY)) == 0) { VATTR_NULL(&atimeattr); atimeattr.va_vaflags |= VA_MARK_ATIME; (void)VOP_SETATTR(vp, &atimeattr, td->td_ucred, td); } } Index: head/sys/pc98/conf/GENERIC =================================================================== --- head/sys/pc98/conf/GENERIC (revision 159963) +++ head/sys/pc98/conf/GENERIC (revision 159964) @@ -1,263 +1,262 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/pc98 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options EPSON_BOUNCEDMA # use bounce buffer for 15-16M #options EPSON_MEMWIN # EPSON memory window support #options LINE30 options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -#options COMMONID # Enable support for common UID/GID space # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # To make an SMP kernel, the next two lines are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # Bus support. device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device adv # Advansys SCSI adapters device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device aic # PC-9801-100 device ct # host adapter using WD33C93[ABC] chip (C bus) device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # keyboard driver device pckbd # PC98 keyboard device gdc # GDC screen device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc #device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm #device pmc #device canbus #device canbepm # Add suspend/resume support for the i8254. #device pmtimer # Audio support #device sound # Generic sound driver #device snd_mss # Microsoft Sound System #device "snd_sb16" # Sound Blaster 16 #device snd_sbc # Sound Blaster # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports options COM_MULTIPORT #options COM_ESP # ESP98 device sio # 8250, 16[45]50, 8251 based serial ports device mse #device joy # NEW Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # OLD Parallel port # Please stay olpt driver after ppc driver #device olpt # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit Ethernet device nge # NatSemi DP83820 gigabit Ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device sn # SMC's 9000 series of Ethernet chips device snc device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath device awi # BayStack 660 and others device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device ehci # EHCI PCI->USB interface (USB 2.0) #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) Index: head/sys/powerpc/conf/GENERIC =================================================================== --- head/sys/powerpc/conf/GENERIC (revision 159963) +++ head/sys/powerpc/conf/GENERIC (revision 159964) @@ -1,153 +1,152 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/powerpc # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu OEA ident GENERIC #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols makeoptions WERROR=-Wno-error #XXX: We don't want -Werror just now # Platform support options POWERMAC #NewWorld Apple PowerMacs options PSIM #GDB PSIM ppc simulator #options SCHED_ULE #ULE scheduler options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options GEOM_GPT #GUID Partition Tables. options COMPAT_43TTY #BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 #Keep this for a while options COMPAT_FREEBSD5 #Keep this for a while options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -#options COMMONID # Enable support for common UID/GID space # Debugging for use in -current options KDB #Enable the kernel debugger options DDB #Support DDB options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles # To make an SMP kernel, the next line is needed #options SMP # Symmetric MultiProcessor Kernel # Standard busses device pci # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # syscons is the default console driver, resembling an SCO console device sc device kbdmux options SC_OFWFB # OFW frame buffer options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 # Serial (COM) ports #device sio # 8250, 16[45]50 based serial ports device zs # Zilog 8350 based serial ports # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device gem # Sun GEM/Sun ERI/Apple GMAC device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device ofwd # Open Firmware disks device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying/(translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard options KBD_INSTALL_CDEV # install a CDEV entry in /dev device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da0 device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) options KTR options KTR_COMPILE=0xffffffff #options KTR_MASK=KTR_SIG options KTR_VERBOSE Index: head/sys/sparc64/conf/GENERIC =================================================================== --- head/sys/sparc64/conf/GENERIC (revision 159963) +++ head/sys/sparc64/conf/GENERIC (revision 159964) @@ -1,237 +1,236 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/sparc64 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # For hardware specific information check HARDWARE.TXT # # $FreeBSD$ cpu SUN4U ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols # Platforms supported # At this time all platforms are supported, as-is. #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options ADAPTIVE_GIANT # Giant mutex is adaptive. -#options COMMONID # Enable support for common UID/GID space # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # To make an SMP kernel, the next line is needed options SMP # Symmetric MultiProcessor Kernel # Standard busses device ebus device isa device pci device sbus device central device fhc # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives # Do NOT enable ATA_STATIC_ID -- cmd646 controller will be !ata2!, # and you will not mount an ATA /. #options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. device isp # Qlogic family device ispfw # Firmware module for Qlogic host adapters #device mpt # LSI-Logic MPT-Fusion (not yet) #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device esp # NCR53c9x (FEPS/FAS366) # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse # syscons is the default console driver, resembling an SCO console device sc device creator # Creator, Creator3D and Elite3D framebuffers device machfb # ATI Mach64 framebuffers device splash # Splash screen and screen saver support options KBD_INSTALL_CDEV # install a CDEV entry in /dev #device ofw_console # Open Firmware console device # Builtin hardware device auxio # auxiliary I/O device device clkbrd # Clock Board (blinkenlight on Sun Exx00) device genclock # Generic clock interface device eeprom # eeprom (really a front-end for the MK48Txx) device mk48txx # Mostek MK48Txx clocks device rtc # rtc (really a front-end for the MC146818) device mc146818 # Motorola MC146818 and compatible clocks # Serial (COM) ports device puc # Multi-channel uarts device scc # Serial communications controllers. device uart # Multi-uart driver # Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device gem # Sun GEM/Sun ERI/Apple GMAC device hme # Sun HME (Happy Meal Ethernet) #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!)