Index: vendor/tcsh/6.13/contrib/tcsh/FAQ =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/FAQ (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/FAQ (revision 131964) @@ -0,0 +1,304 @@ + + [Home] FAQ + + Home | RecentChanges | Preferences + _________________________________________________________________ + + This is for people who do not read the manual! + + So far people who don't read manuals don't read this either... I may + call it README.*PLEASE* in the future, but then the same people won't + be able to get ftp it... :-) + _________________________________________________________________ + + 1. Where can I find tcsh sources? + + See http://www.tcsh.org/MostRecentRelease for download locations. + _________________________________________________________________ + + 2. Why is the meta key broken in tcsh-5.20 and up? + + On some machines the tty is not set up to pass 8 bit characters by + default. Tcsh 5.19 used to try to determine if pass8 should be set by + looking at the terminal's meta key. Unfortunately there is no good way + of determining if the terminal can really pass 8 characters or not. + Consider if you are logged in through a modem line with 7 bits and + parity and your terminal has a meta key. Then tcsh 5.19 would set + wrongly set pass8. + + If you did like the previous behavior you can add in /etc/csh.login, + or in .login: + + if ( $?tcsh && $?prompt ) then + if ( "`echotc meta`" == "yes" ) then + stty pass8 + endif + endif + + If you don't have pass8, maybe one of these would work.. + + stty -parity -evenp -oddp cs8 -istrip (rs6000) + stty -parenb -istrip cs8 + + Finally, tcsh will bind all printable meta characters to the self + insert command. If you don't want that to happen (i.e. use the + printable meta characters for commands) setenv NOREBIND. + _________________________________________________________________ + + 3. I ran 'dbxtool &' and 'shelltool &' from tcsh, and they end up in + cbreak and no echo mode? + + These programs are broken. Background jobs should not try to look at + the tty. What happens is that dbxtool looks in stderr to inherit the + tty setups, but tcsh sets up the tty in cbreak and -echo modes, so + that it can do line editing. This cannot be fixed because tcsh cannot + give away the tty. Pick one of the following as a workaround: + + dbxtool < /dev/null >& /dev/null & + /usr/etc/setsid dbxtool & + + If that does not work, for dbxtool at least you can add "sh stty sane" + in your .dbxinit + _________________________________________________________________ + + 4. I tried to compile tcsh and it cannot find ? + + Your system does not support NLS. Undefine NLS in config_f.h and it + should work fine. + _________________________________________________________________ + + 5. Where can I get csh sources? + + Csh sources are now available with the 4.4BSD networking + distributions. You don't need csh sources to compile tcsh-6.0x. + _________________________________________________________________ + + 6. I just made tcsh my login shell, and I cannot ftp any more? + + Newer versions of the ftp daemon check for the validity of the user's + shell before they allow logins. The list of valid login shells is + either hardcoded or it is usually in a file called /etc/shells. If it + is hard-coded, then you are out of luck and your best bet is to get a + newer version of ftpd. Otherwise add tcsh to the list of shells. [For + AIX this file is called /etc/security/login.cfg.] Remember that the + full path is required. If there is no /etc/shells, and you are + creating one, remember to add /bin/csh, /bin/sh, and any other valid + shells for your system, so that other people can ftp too :-) + _________________________________________________________________ + + 7. I am using SunView or OpenWindows and editing is screwed up. In + particular my arrow keys and backspace don't work right. What am I + doing wrong? + + Well, cmdtool tries to do its own command line editing and the effect + you get is one of using an editor inside an editor. Both try to + interpret the arrow key sequences and cmdtool wins since it gets them + first. The solutions are in my order of preference: + + 1. Don't use suntools + 2. Use shelltool instead of cmdtool. + 3. Unset edit in tcsh. + _________________________________________________________________ + + 8. On a SPARCstation running Solaris 2.x and OpenWindows 3.1, inside a + cmdtool, the short-cut key sequence to clear log (i.e. Meta-e or + Diamond-e) doesn't work: it just echos 'e'; or + + Unset edit in tcsh. + _________________________________________________________________ + + 9. On a SPARCstation running Solaris 2.x and OpenWindows 3.1, maketool + (within SPARCworks) doesn't work: it just does a `cd' to the working + directory then stops. + + Unset edit in tcsh. Using shelltool instead of cmdtool does not fix + this. + _________________________________________________________________ + + 10. I rlogin to another machine, and then no matter what I tell 'stty' + I cannot get it to pass 8 bit characters? + + Maybe you need to use 'rlogin -8' to tell rlogin to pass 8 bit + characters. + _________________________________________________________________ + + 11. Where do I get the public domain directory library? + + Anonymous ftp to prep.ai.mit.edu:/pub/gnu/dirent.tar.Z + _________________________________________________________________ + + 12. I compiled tcsh using gcc, and when I start up it says: tcsh: + Warning no access to tty (Invalid Argument). Thus no job control in + this shell + + Your file is not ansi compliant. You have one of 3 + choices: + + 1. Run fixincludes from the gcc distribution. + 2. Add -traditional to the gcc flags. + 3. Compile with cc. + _________________________________________________________________ + + 13. I compiled tcsh with the SunOS unbundled compiler and now things + get echo'ed twice. + + It is a bug in the unbundled optimizer. Lower the optimization level. + _________________________________________________________________ + + 14. How can I use the arrow keys with hpterm? + + Hp terminals use the arrow keys internally. You can tell hpterm not to + do that, by sending it the termcap sequence smkx. Since this has to be + done all the time, the easiest thing is to put it as an alias for + precmd, or inside the prompt: + + if ($term == "hp") then + set prompt="%{`echotc smkx`%}$prompt" + endif + + Note that by doing that you cannot use pgup and pgdn to scroll... Also + if you are using termcap, replace "smkx" with "ks"... + _________________________________________________________________ + + 15. On POSIX machines ^C and ^Z will do not work when tcsh is a login + shell? + + Make sure that the interrupt character is set to ^C and suspend is set + to ^Z; 'stty -a' will show you the current stty settings; 'stty intr + ^C susp ^Z' will set them to ^C and ^Z respectively. + _________________________________________________________________ + + 16. I am trying to compile tcsh and I am getting compile errors that + look like: + + >sh.c:???: `STR???' undeclared, outside of functions [gcc] + >"sh.c", line ???: STR??? undefined [cc] + + You interrupted make, while it was making the automatically generated + headers. Type 'make clean; make' + _________________________________________________________________ + + 17. On the cray, sometimes the CR/LF mapping gets screwed up. + + You are probably logged in to the cray via telnet. Cray's telnetd + implements line mode selection the telnet client you are using does + not implement telnet line mode. This cause the Cray's telnetd to try + to use KLUDGELINEMODE. You can turn off telnet line mode from the cray + side by doing a "stty -extproc", or you can get the Cray AIC to build + a telnetd without KLUDGELINEMODE, or you can compile a new telnet + client (from the BSD net2 tape), or at least on the suns use: 'mode + character'. + _________________________________________________________________ + + 18. On AU/X, I made tcsh my startup shell, but the mac desktop is not + starting up (no X11 or Finder), and I only get console emulation. + + This is another manifestation of item 5. Just add the pathname to tcsh + in /etc/shells and everything should work fine. + _________________________________________________________________ + + 19. On machines that use YP (NIS) tilde expansion might end up in + /dev/null + + If this happens complain to your vendor, to get a new version of NIS. + You can fix that in tcsh by defining YPBUGS in config.h + _________________________________________________________________ + + 20. Script on SGI 4.0.5 does not give us a tty, so we cannot have job + control. + + Their csh does not have job control either. Try: + + % script + % cat > /dev/tty + _________________________________________________________________ + + 21. I start tcsh and it takes a couple of minutes to get the prompt. + + You have defined REMOTEHOST and your DNS is not responding. Either + undefine REMOTEHOST and recompile or fix your DNS. + _________________________________________________________________ + + 22. If you need help generating your .cshrc file, check out: + + http://www.imada.sdu.dk/~blackie/dotfile/ + + or + http://www.dotfiles.com + _________________________________________________________________ + + 23. On POSIX systems the kernel will send hup signals to all the + processes in the foreground process group if 'stty hupcl' is set. + + For example + + ./tcsh + echo $$ + 591 + ./tcsh + kill -6 591 + + Will kill everything, since hup will be sent to all tcsh processes. To + avoid that you can set stty -hupcl, but it is not recommended. + _________________________________________________________________ + + 24. When I rsh the meta key stops working on the remote machine. + + Try using rsh -8; this option is undocumented on some systems, but it + works. If that does not work, get and use ssh/sshd. You'll be better + off from a security point of view anyway. + _________________________________________________________________ + + 25. Tcsh compiled under hp/ux-10.x does not pass resource limits + correctly when ran on hp/ux-11.x systems. + + This is a problem with lack of ABI compatibility between the two + systems. The only solution is to recompile. + _________________________________________________________________ + + 26. Refreshing in command line editing can appear broken on some OS's + + This is because the termcap/terminfo description lies about the + ability of the terminal to use tabs. At least on Compaq/DEC Alpha + OSF/1 3.x and 4.x systems, stty -tabs will cause problems. + _________________________________________________________________ + + 27. Where can I learn the merits of tcsh vs. bash vs. csh vs. sh etc? + + You can read the manual page section titled [NEW FEATURES] listing + features that tcsh adds to csh. + + You can read Tom Christiansen's [Csh Programming Considered Harmful], + a document advocating that csh (and by extension, tcsh) should not be + used for writing shell scripts. + + XXX: Need to find something about [bash], but bash is sh-compatible + and has many of the same interactive features of tcsh (command + completion does not appear to be as flexible, though). + + [Curtains up: introducing the Z shell] has a pretty good rundown on + zsh. Aside from the arguments about csh being evil, tcsh appears to + compare well with zsh [zsh]. Zsh is sh and ksh compatible, with many + of the interactive features of tcsh. + _________________________________________________________________ + + 28. Why does FreeBSD's tcsh do history browsing differently than I + expect? + + On FreeBSD, by default, the up arrow is set to + "history-search-backward", rather than the default "up-history". As a + result, if you type (part of) a word and press up arrow, you'll see + previous commands that match the prefix. Pretty useful, actually, + although it takes some getting used to. You can use bindkey to see + your settings, and to rebind up & down differently if desired. + _________________________________________________________________ + + Everything else is a bug :-( + + Christos + _________________________________________________________________ + + Home | RecentChanges | Preferences + Edit text of this page | View other revisions + Last edited April 29, 2004 15:02 (diff) + Search: ____________________ Property changes on: vendor/tcsh/6.13/contrib/tcsh/FAQ ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/Fixes =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/Fixes (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/Fixes (revision 131964) @@ -0,0 +1,1655 @@ + 36. V6.13.00 - 20040519 + 35. V6.12.03 - 20040322 + 34. turn on kanji and dspmbyte by default; add check for utf8 locales, + and turn parsing of that automatically based on $LANG. + 33. Fix compilation issue under Windows/NT and charset incorrect patch + (Yoshiyuki Sakakibara) + 32. completion additions (Tom Warzeka) + 31. compilation fix (Martin Kraemer) + 30. V6.12.02 - 20040221 + 29. Glob completion listing addition (Tom Warzeka) + 28. BS2000 bs2cmd builtin. (Martin Kraemer) + 27. Fix interrupt resetting code when /etc startup scripts have syntax errors + (Mark A. Grondona) + 26. Clarification of kill-ring commands (Per Hedeland) + 25. Debian completion additions (Martin Godisch) + 24. Japanese character set fixes (Juehiro-san) from debian + 23. NLS charset fixes; disabled since they only work with gnu gencat + (Martin Godisch) + 22. Fix HPUX >= 11 resource (Jack Cummings) + 21. Handle breaksw that jumps out of loops. + 20. Revert #16. It causes worse problems. + 19. Avoid using execl() because the last NULL does not always promoted to + a pointer because the function is variadic (Harti Brandt) + 18. revert ignoreeof to the 6.11.00 behavior and document it (Martin Godisch) + 17. do a case insensitive comparison for the multibyte vars (Martin Godisch) + 16. don't sigsuspend() for an already exited job + 15. glob all arguments in source (Martin Godisch) + 14. various debian fixes (Martin Godisch) + 13. setenv syntax check revert (Satoshi I. Nozawa) + 12. EAGAIN typo (dan harkless) + 11. filec compilation issue on hpux (beebe) + 10. win32 compilation fixes for O_LARGEFILE (amol) + 9. Don't go into an infinite loop when tcgetpgrp() returns an error. + 8. Cygwin fixes (Corinna Vinschen) + 7. NLS catclose() bug avoidance (KAJIMOTO Masato) + 6. V6.12.01 - 20030208 + 5. Misc NT cleanup. No more GPL code (amol) + 4. use strtol() to detect errors in builtin kill (Peter Jeremy) + 3. Recognize linux systems on mips* (Maciej W. Rozycki) + 2. Enable complete=igncase on unix (Stephen Krauth) + 1. Eliminate maxitems (Todd Miller) + + 58. V6.12.00 - 20020732 + 57. misc cleanups. + 56. V6.11.05 - 20020712 + 55. We should have socklen_t in the INET6 case, but we leave int otherwise. + 54. Fixed for Darwin/Rhapsody (Mark Peek) + 53. provide new config.sub and config.guess from ftp://ftp.gnu.org/gnu/config/ + (Nelson Beebe) + 52. V6.11.04 - 20020709 + 51. Dissallow setting of environment variables that do not contain + alphanumeric names (Ton Voon) + 50. Don't expand path components that don't resolve to path names (Jonathan + Chen) + 49. Make $ignoreeof agree with the man page (Matias Moreno Meringer) + 48. Fix argument passing in tc.prompt.c expdollar (Nelson Beebe) + 47. Completion fixes from FreeBSD (Mark Peek) + 46. FreeBSD's sbsize limit (Mark Peek) + 45. Fix repeat 3 repeat 2 echo foo + 44. Fix I/O redirection in scripts (Ian D Allen) + 43. Fix ` \\\n ` evaluation (Jean-Luc Leger) + 42. add --version (Nelson Beebe) + 41. portability fixes for sed (Nelson Beebe) + 40. undef sv_handler for AIX's benefit. (Nelson Beebe) + 39. Add a test for ss_family that disables IPV6 (linux/ppc, osf/1 have + problems) (Nelson Beebe) + 38. Disable ipv6 for Apple (Nelson Beebe) + 37. Fix darwin configure entry (Nelson Beebe) + 36. V6.11.03 - 20020701 + 35. Add Ian D. Allen's bug list. + 34. If we are invoked as csh, default to bsd echo (Matej Vela) + 33. Don't close file descriptors too early because setuid scripts fail. + (Jill Pryse-Davies) + 32. Completion updates (Tom Warzeka) + 31. Fix compilation issue on SunOS4 with _POSIX_VDISABLE (Tom Warzeka) + 30. ukrainian update (Olexander Kunytsa) + 29. DSPMBYTE=utf8 patch (Jean-Luc Leger) + 28. fix ipv4 only compilation, remove extra sigsetmask() call (Takayuki Nakao) + 27. window change can cause free to be re-entered causing abort (Mark Peek) + 26. vp->vec vetting, suggested by Ian Dall. + 25. V6.11.02 - 20020516 + 24. Fix prompt bugs in $var and %c0n (TAKAI Kousuke) + 23. Add Cray SV2 config (Rafal Maszkowski) + 22. Add pdf manual page (Warren Ferguson) + 21. Fix REMOTEHOST lossage in with AF_LOCAL sockets (Tom Mander) + 20. Fix win32 break because of TIOCSTI (Amol) + 19. Fix TIOCSTI for hpux 11 (Igor Schein) + 18. Avoid collapsing paths that refer to non-existent components + (Martin Kraemer) + 17. Make -shell invocations always treated as a login shell. + 16. V6.11.01 - 20020308 + 15. Fixes to polish nls locale (Paweł Niewiadomski) + 14. russian locale fixes (Alexey Dokuchaev) + 13. document door support (Shaen) + 12. tcsh euc handling extensions (Alexey Zelkin) + 11. Make sure that jobcmd does not clobber the current job (Rob McMahon) + 10. Make sure that the output of verbose and echo do not end up in the + command output (Victor I. Pasko) + 9. Add %j in prompt [needs more work; is not right the first time + after proclist changes] (Hr. Peter Kruse) + 8. `` commands with embedded newlines would ignore commands following + the new line (Victor I. Pasko) + 7. Re-initialize nls if NLSPATH is changed (Naoki Wakamatsu) + 6. Fix 64 bit compilation with linux and resource limits. + 5. Avoid double globbing when ls-F needs to fork (Joe Townsend) + 4. put back csh filec compatible support. + 3. add support for quads in xprintf in the presence of gcc. + 2. unlimit should set rlim.rlim_max to rlim.rlim_cur if max < cur. + 1. Make ~user work again when the home directory is '/'. + + 40. V6.11.00 - 20010902 + 39. Completion fixes (Tom Warzeka) + 38. make c_insert not static so that it can be used from win32 (amol) + 37. Fix rmstar not to corrupt memory when we say no. (Mark Peek) + 36. V6.10.02 - 20010806 + 35. polish nls locale (Paweł Niewiadomski)) + 34. Fix a tcsetattr race running background jobs as the last line on an xterm + window (Andrew Brown) + 33. jobcmd alias (Greg Parker) + 32. hpux11 support (Joshua Weage) + 31. Fix SHORT_STRINGS compilation (Daniel Trinkle) + 30. Add kill -s (Mark Peek) + 29. Don't recognize all mips as dec (Bjorn Knutsson) + 28. Fix GLOB_QUOTE problem (noted by Per) I introduced in 6.10.01. + 27. Port to concurrent's powermaxos (Matt Majka) + 26. New builtin srcfile (Amol) + 25. Fix bindkey "\\" cmd (reported by Ismail H. Tuncer) + 24. %0Xc was broken in the prompt if the user's home directory was '/'. + (reported by Edward Glowacki) + 23. V6.10.01 - 20010426 + 22. LARGEFILE support on Linux. + 21. Add big5 multibyte support (Yen-Ming Lee) + 20. Check the return value of setpriority (Dima Dorfman) + 19. Avoid constructing paths with // on DomainOS (Nickolai Zeldovich) + 18. Russian translation (Ilmar S. Habibulin) + 17. Fix hostdefs for alpha support in FreeBSD (Andrey A. Chernov) + 16. Add door support in colorls (Shaen) + 15. Add BSD_STYLE_COLORLS for FreeBSD (Anand) + 14. MAXHOSTNAMELEN needs to be 256 (Kris Kennaway) + 13. Document stty -tabs problems on compaq (Nelson H. F. Beebe) + 12. Fix broken comment, and new versions of config.guess and config.sub + (H.Merijn Brand) + 11. fix redrawing in the recognize case (Andrew Brown) + 10. don't call qsort with 0 items. (Luke Mewburn) + 9. fix echo;echo;echo; not outputing anything (Andrey A. Chernov) + 8. Fix shell word parsing in dabbrev-expand (Per Hedeland) + 7. hpux fixes (Chienting Lin) + 6. Implement kill ring (Per Hedeland) + 5. Avoid core-dumping when a very long $HOME gets passed in (Kris Kennaway) + 4. Add rlimit_vmem for linux based on rlimit_as (N KomaZaki) + 3. back out symlink=expand path check. + 2. Add Estonian translation (Toomas Soome) + 1. Accept empty $savedirs to mean infinity. + + 57. V6.10.00 - 20001119 + 56. Completion fixes (Tom Warzeka) + 55. add missing linux kanji define (Tsuyoshi Kawabe) + 54. More WINNT_NATIVE fixes (amol) + 53. Fix compile error on winnt (Yoshiyuki Sakakibara) + 52. nonstopux configure and makefile fixes (Tom Bates) + 51. V6.09.04 - 20001111 + 50. Order of initialization for multibyte display was wrong + (HyunChul Kim) + 49. Follow the guideline for linux for japanese locale: + http://www.linux.or.jp/JF/JFdocs/Japanese-Locale-Policy.txt + (Tomohiro KUBOTA) + 48. Ukrainian nls map (Olexander Kunytsa) + 47. exit immeditiately if we get an error while we are setting up + (Michael Shalayeff) + 46. (unset path; unsetenv PATH; rehash) -> crash (Kent Vander Velden) + 45. change winnt to winnt_native (Randolph Fritz) + 44. Support home/end in the editor (Andrey A. Chernov) + 43. Typo s/gycwin/cygwin/ in tc.os.h (Andreas Schott) + 42. Alpha ev6 addition (Karen R. McArthur) + 41. DSPMBYTE patch from (Issei Suzuki) + 40. Security fix for here-doc tmp files (proton@ENERGYMECH.NET) + 39. Fix resource limit rounding *again* (Johannes Gross) + 38. Fix $ expansion in prompt (Takashi Sumiyoshi) + 37. V6.09.03 - 20000715 + 36. cygwin port fixes (Arihiro Yoshida) + 35. Add a new "catalog" variable that specifies which NLS catalog + to be used (Issei Suzuki) + 34. cleanup and addition of page up/down (amol) + 33. fix vfork compile problem. + 32. use inet_addr instead of inet_aton for portability. + 31. V6.09.02 - 20000704 + 30. lots more completions (George Cox) + 29. change FILSIZ to BUFSIZE [now that BUFSIZE >> MAXPATHLEN] and + avoid a potential buffer overflow in sh.dir.c (Volker Schmidt) + 28. _MINIX_VMD port (Martijn van Buul) + 27. inet6 handling for remotehost and configure (Hajimu UMEMOTO) + 26. aix-4 does not need gethostname (Darren Reed) + 25. IBM OS/390 Unix Systems Services support (Peter Prymmer) + 24. Fix prompt formatting (Andrey A. Chernov) + 23. Use HostType from Imakefile correctly (Kjetil Torgrim Homme) + 22. Handle long and expanded history lines better (Boleslaw Ciesielski) + 21. With symlinks=expand expand valid paths only (Martin Kraemer) + 20. Make one-byte charsets work with KANJI (Andrey A. Chernov) + 19. NT-specific executable detection moved to NT code (amol) + 18. New "complete module" (Dan Nicolaescu) + 17. Correctly display scaling string in limit error messages (Nathan Ahlstrom) + 16. Don't display "unset watch" message when not appropriate (kim) + 15. V6.09.01 - 20000114 + 14. Circumvent IRIX4D ESTALE bug by exiting. + 13. IRIS4D de-linting. + 12. Finnish nls catalogs (Jukka A. Ukkonen) + 11. Even more multibyte fixes (Taga Nayuta) + 10. Patches to statically link tcsh under solaris-2.6 (John Hawkinson) + 9. Manual page typos (R. Bernstein) + 8. HP/UX-11 (9000/800) HP/UX-10.20 (9000/820) (Haflidi Sigtryggur Magnusson) + 7. Color-ls fixes (Luis Francisco Gonzalez) + 6. Don't re-use time0 to compare to stat's st_mtime, cause it could be + the value returned from times(2) which is the ticks since system + startup (Frank van der Linden) + 5. Time percentage wrap fix (Simon Burge) + 4. EUCKR support (HyunChul Kim) + 3. Grammar and typo fixes for tcsh.man (Steve Kelem) + 2. More multibyte fixes (Rodney Ruddock) + 1. Change 6.08 -> 6.09 where I missed it; update for utlrix 4.5 (Simon Burge) + + 65. V6.09.00 - 19990816 + 64. Add csh emacs mode (Dan Harkless) + 63. Make sure the the glob buffer matches the word buffer size (Brian Biswas) + 62. Fix periodic to work without tperiod set (Kenny McCormack) + 61. V6.08.07 - 19990813 + 60. Fix e_dabbrev_expand (Bjorn Knutsson) + 59. Make \builtin work again (by calling the command not the builtin) + 58. Add NLS_BUGS for OS's that keep file descriptors open for NLS (Ian Dowse) + 57. Make NONLSREBIND work after tcsh starts up. + 56. Fix AIX stupid exit bug. (Dan Harkless) + 55. More irix fixes (Kaveh) + 54. V6.08.06 - 19990701 + 53. module command completion (Dan Nicolaescu) + 52. Man command completion enhancement (Tom) + 51. Fixes for irix configuration (Kaveh) + 50. Support \a and \e in echo command. From (Keith Thompson) + 49. Alpha configure nit from Kaveh + 48. V6.08.05 - 19990511 + 47. In some system, when a builtin fails immediately after we start + tcsh and before we print any messages, NLS messages fail (some + descriptor might be closed) [FreeBSD, HP/UX?]. So we force reading + the NLS catalogs in errinit() (Yoshiyuki Sakakibara) + 46. typos in ja/set1 and ja/set29 (Yoshiyuki Sakakibara) + 45. "dspmbyte autoset trap" support to HP-UX 10.20. (Yoshiyuki Sakakibara) + 44. misnumbered NLS message in tw.help.c (Yoshiyuki Sakakibara) + 43. colorcat variable for NLS color messages (Yoshiyuki Sakakibara) + 42. autoconf fixes from Kaveh (and if it broke, me) + 41. SGI irix fixes from Glenn Coombs. + 40. Don't spin writing the history file when quota is exceeded (Rob McMahon) + 39. V6.08.04 - 19990419 + 38. complete additions (John Gotts) + 37. Port to amiga with geek gadgets (Arto Huusko) + 36. Ignore case in setenv for windows (amol) + 35. Bug fixes for NT unc stuff (amol) + 34. Hash spell check (amol) + 33. V6.08.03 - 19990211 + 32. Helpcommand documentation (Vladimir Alexiev) + 31. small Y2K fix [%y in prompt would be formatted as 10 not 00 at year 2000], + and new Itoa() code (Chris Torek) + 30. OpenBSD m68k patches (Paul DuBois) + 29. Avoid redefinition of getpeername on Solaris-2.7 + 28. fix problems with savedups=erase, savehist=merge (Randy Gobbel) + 27. Don't set $shell to csh, if we were invoked as tcsh (Tomas Persson) + 26. added $_ + 25. added postcmd + 24. V6.08.02 - 19981124 + 23. document continue and continue_args + 22. wrong test in slowexec made NT optimization a noop (Amol) + 21. Rhapsody fixes + separate CFLAGS/CPPFLAGS (Wilfredo Sanchez) + 20. literals in both prompt at rprompt did not work properly (Taga Nayuta) + 19. multibyte deletion fixes (Yoshiyuki.Sakakibara) + 18. clean up key binding stuff for NT by moving the nt dependent code to + the NT source (amol) + 17. dspmbyte fixes for AIX, typos in man page and nls (Yoshiyuki Sakakibara) + 16. Convex fixes (Ron Echeverri) + 15. V6.08.01 - 19981025 + 14. SX4 port; this adds many casts for machines where ptrdiff_t is 64 bits. + (Andreas Schott) + 13. U/Win port; does not work properly with U/Win 1.6, wait for the next + version (Chris Jones) + 12. Sgi does not need gethostname prototype (John Bogan) + 11. Logic in sh.dir.c was wrong for NT (Amol) + 10. HP_CXD_SPP stat64 fixes (Scott Garee) + 9. Documentation spelling fixes (Keith Thompson) + 8. Documentation fix for savedirs (Amol) + 7. Siemens OSD_POSIX fixes (Martin Kraemer) + 6. include for all the BSD's (Trevor Johnson) + 5. Multibyte display fixes for gnu ls (Taga Nayuta) + 4. Configure/Makefile hesiod and bindir fixes (Dan Winship) + 3. Use winnt not win32 in tc.os.h (Amol) + 2. Cygwin32 port (Raj Menon) + 1. Ported Fixes (Tom) + + 95. V6.08.00 - 19981002 + 94. where builtin nt fix (Amol) + 93. V6.07.13 - 19980926 + 96. NT multibyte fixes (Amol) + 95. NeXT needs getcwd. + 94. fix new bug introduced by strncpy'fication in sh.dir.c (Taga Nayuta) + 93. V6.07.12 - 19980918 + 92. add cray in configure script (Tom) + 91. nls fixes + 90. Avoid buffer overflows in directory code (kim) + 89. Add multibyte character display support (Yoshiyuki Sakakibara) + 88. Make tcsh use getcwd instead of getwd and supply a getcwd. + 87. Fix remotehost again (kim) + 86. V6.07.11 - 19980913 + 85. Leave remotehost ip addresses alone (don't try to resolve them) (Kim) + 84. Read vs. force_read fixes (Amol) + 83. Make colorls if color is set before the first LS_COLORS setenv + (Taga Nayuta) + 82. Use _PATH_DEFPATH on BSD4_4 systems. (Jim Bernard) + 81. Cursor bounds checks (Michael Schroeder) + 80. Syntax error nits (Michael Schroeder) + 79. configure fixes (Michael Schroeder) + 78. V6.07.10 - 19980904 + 77. Off by one error in NO_ERRORS... + 76. Japanese NLS messages (Yoshiyuki Sakakibara) + 75. Add ENXIO and EBADF in the test for write failures for Irix Zombies + (Ralf W. Grosse-Kunstleve) + 74. Missed a test for NOSTRCOLL in glob.c (Michael Liepelt) + 73. Another ABSOLUTEP change (Amol) + 72. Italian NLS messages (Massimo Bertozzi) + 71. WIN32 fixes for ntslowexec and color_ls literal printing in prompt (Amol) + 70. a few missed WIN32 merges (Amol) + 69. defined YPBUGS for sgi (Kaveh) + 68. V6.07.09 - 19980707 + 67. Separate the nt builtins (Amol) + 66. completion fixes (Tom) + 65. color ls fixes (Taga Nayuta) + 64. V6.07.08 - 19980629 + 63. add config.h.in (Kaveh) + 62. win32 updates (Amol) + 61. warning and portability cleanups on the new changes (Kaveh) + 60. V6.07.07 - 19980628 + 59. Fast execute by-pass for win32 (Amol Deshpande) + 58. Clean up const usage a bit, and fix gcc 2.8.1 warnings. + 57. Use @bindir@ for DESTBIN in Makefile.in (Edgar Hoch) + 56. Avoid overflow in time builtin computation (Nobue Adachi) + 55. Color ls additions (Taga Nayuta) + 54. unsigned char vs. char warning fixes (Kaveh) + 53. Solaris 64 bit fixes (fix directory offset bug) (Thomas-Martin Kruel) + 52. More win32 patches (Amol) + 51. autoconf lossage from (Kaveh) + 50. V6.07.06 - 04/08/98 + 49. Collation fix for globbing (Andrey A. Chernov) + 48. We might have NLS_CATALOGS and not LC_MESSAGES (Andrey A. Chernov) + 47. 4.4BSD header fixes (Andrey A. Chernov) + 46. Signed char prompt fixes (Andrey A. Chernov) + 45. Pattern match fix for directory searches (Mike Patnode) + 44. Pentium DGUX fixes (Miko Nahum) + 43. Spanish nls message catalogs (Luis Francisco Gonzalez) + 42. Fix trailing whitespace parsing in HASHBANG code (Martin Kraemer) + 41. Remove stray debuggin message from unmatched substitutions. + (from Amol Deshpande) + 40. Fix reversed arguments in Usagae message. (from Amol Deshpande) + 39. Fix bug introduced at tcsh-7.06.03 [expdollar] that affected %.n prompt + format. + 38. Fix typos introduced in last batch of changes. + 37. Fix interrupted script using onintr, exiting parent shell problem. + 36. Cleanup prototypes. + 35. V6.07.05 - 10/28/97 + 34. Integrate Amol Deshpande's WINNT fixes to the tcsh source. Note that + this is not complete yet; we are missing the NT glue code and the message + catalogs. + 33. Fix ^T at the first character in the line (Chuck Silvers) + 32. Eliminate xsprintf and xvsprintf + 31. Qmail patch from (Matthew Zahorik) + 30. Added missing linux signals (Vadim Vygonets) + 29. fixed problem where complete complete 'p/*/t:*.txt/' would not honor + the pattern. + 28. Port to an EBCDIC machine: BS2000 by Siemens Nixdorf that has an + IBM/390 compatible processor (Martin.Kraemer) + 27. Detect when we have errors writing to stdout (Vadim Vygonets) + 26. Ignore quotes in the comparisons for builtins, so that \builtin works + (Amol Deshpande). + 25. HPUX, portability fixes; make sure that we have the right config file + (Jonathan Kamens) + 24. Don't do lookups for x displays and figure out ttys properly + (Leonard N. Zubkoff) + 23. make print_by_columns print in a single column when the output is not a tty + 22. use rlim_t for Solaris2 (Casper Dik) + 21. V6.07.04 - 05/04/97 + 20. set -f -l patch (Michael Veksler) + 19. SGI patches (Tomasz J. Cholewo). Also fix completion code to take into + account aliases that start with a period. + 18. SCO patches (Boyd Lynn Gerber) + 17. Fujitsu patches (Toshiaki Nomura) + 16. autoconf patches (Kaveh Ghazi) + 15. BSDI patches (Paul Vixie) + 14. %Q formatting character addition. + 13. Fix set=#123; echo $i:s/#// (Quoting problem) + 12. V6.07.03 - 02/23/97 + 11. Understand %$variable in the prompt. + 10. Quote directory names properly in .cshdirs + 9. USE_ACCESS and autoconfig patches from (Larry Schwimmer) + 8. Pyramid att config file (Andrew Lister) + 7. $rprompt code (Luke Mewburn) + 6. Kanji patches (Huw Rogers) + 5. Cray T3E port (Jorn Amundsen) + 4. Avoid html redirects in tcsh.man2html (from Kimmo) + 3. HP/UX 10.0 fix for filesize resource limit; don't scale by 512 anymore. + 2. Workaround for TIOCSTAT for NetBSD from lukem@netbsd.org + 1. Return exit status from 0..255 not -128...127, as POSIX mandates. + +V6.07.02, 10/27/96 + 58. More configure fixes from Kaveh. + 57. Fix histdup=erase again: Don't renumber events, or access uninitialized + storage. + 56. 6.07.01 - 10/19/96 + 55. Fix histdup=erase, where after some repetitions, we would get negative + history events (kim@gw.com) + 54. NLS fixes and typo in sh.err.c (Martin.Kraemer@deejai.mch.sni.de) + 53. Output history in raw format in the history file (mveksler@VNET.IBM.COM) + 52. Fix possible core dump when !: in autoexpand mode (rbrown@ERA.COM) + 51. 6.07.00 - 10/11/96 + 50. Avoid stdio.h inclusion problem in SCO (gethost.c). + 49. A bit of housekeeping in host.defs + 48. 6.06.04 - 10/05/96 + 47. Fix tellmewhat() code to return true if found. + 46. Change register foo to register int foo to avoid compiler warnings. + 45. Fix problem with sticky non editing mode from Casper Dik. + 44. history lex fix from Martin Kraemer; history events that ended with 0 + were not properly parsed. + 43. SNI fixes from Martin Kraemer. + 42. SGI fixes from Ralf W. Grosse-Kunstleve. + 41. BSDI2.1 fixes from Paul Vixie. + 40. 6.06.03 - 09/24/96 + 39. undef TIOCGLTC for HP/UX 10.0 from Michael Shroeder + 38. Sinix fixes + 37. 6.06.02 - 06/22/96 + 36. Added implicitcd + 35. Added configure.in and Makefile.in from Kaveh. + 34. unset path, unsetenv PATH, ./foo did not work. + 33. Add VAR_NOGLOB, and use it to avoid globbing directory names when + cd'ing into them. + 32. Fix bug introduced in the new tty parsing code. + 31. Avoid pushing string back to the parsing string in ${ errors. + 30. Patches for the manual page from Dave. + 29. 6.06.01 - 05/24/96 + 28. Use sysconf to get NCARGS if available Robert Daniel Kennedy + + 27. Grab the program name and use that instead of tcsh in error messages. + 26. Fix histdup, so that it does not leave gaps in the event sequence. + 25. HP/UX v10.0 fixes: Don't use bsdtty.h and avoid clobbering memory + since SIGRT??? is defined as -1. + 24. Avoid coredumps when $TERMCAP exceeds 1024 characters + Michael Schroeder + 23. Fix memory clobbering when SHORT_STRINGS is not defined. + Todd J Derr + 22. Only restart stopped editors. Robert Webb + 21. Recognize pts sysv ptys when checking to set autologout Bob Myers + + 20. Magic space incomplete modified core dump fix. Chris Metcalf + , Bradley White + 19. Linux nls fixes Rik Faith + 18. SGI RS8000, Ported notes. Ralf W. Grosse-Kunstleve + + 17. Greek nls messages. Aggelos P. Varvitsiotis + 16. Imakefile linux and libcrypt fixes. Jonathan Kamens + 15. FreeBSD fixes Jukka Ukkonen + 14. Expand the environment space for path Steve Kelem + 13. Don't overwrite the environment randomly Steve Kelem + + 12. Don't turn the editor on when we have dumb or unknown terminals. This + breaks emacs when compiled with terminfo Jonathan Kamens + 11. Fix F- parsing in tc.bind.c (Bob Meyers) + 10. Added -T option in history to force timestamp printing. -h alone does + not print timestamps anymore for compatibility with csh. + 9. Typo in tc.bind.c [with -DOBSOLETE] (misplaced parenthesis) + 8. Recognize convex models properly. + 7. suppress the DING! option using the noding variable. + 6. negative nice values did not work. + 5. Harris CX/UX 7.x support. + 4. ERR_DMMODE was used on the crays but not defined. I changed the error + messages in tc.os.c to use ERR_STRING instead, and fixed a missing error + message in the catalogs. Someone will need to retranslate #30 and #31 + in set23. + 3. Bug setting listflags... Workaround: set listflags=(A /bin/ls) + 2. Typo in Imakefile (# comment instead of c comment) + 1. Typo in ma.setp.c (missing parenthesis) + + +V6.06.00, 05/13/95 + 88. Cleanup off-by-one error ed.defns.c. + 87. 6.05.09 - 05/06/95 + 86. Small memory leak in dosetenv() + 85. Make sure that the number of editing functions defined is correct + and abort otherwise. + 84. Completion Fixes from Tom + 83. Don't add yp stuff in the tilde cache [names that start with + or -] + 82. Don't let children catclose() in xexit(), because the parent will lose + access to the nls catalogs. From Michael. + 81. 6.05.08 - 04/29/95 + 80. Update to the newest csh sh.file.c + 79. More completions from Tom. + 78. Fix the Imakefile to use XCOMM + 77. Update for AIX 3.2. + 76. French catalog from J.M.Vansteene@frcl.bull.fr (fwd Michael Schmidt) + 75. Nls fixes and small typos from Michael + 74. PDP11 BSD type fixes. + 73. More manual page fixes. + 72. 6.05.07 - 04/19/95 + 71. More NLS catalog fixes. + 70. Bruce's jumbo patch. + 69. 6.05.06 - 03/15/95 + 68. make clean does not clobber config.h if Makefile.std is used. + make veryclean does. + 67. New config define NISPLUS. Reportedly fixes vanishing output of ~expansion + on solaris 2.4. + 66. showdots has been removed; use listflags instead. [handles -x too] + 65. more nls catalog fixes. + 64. set histchars=,. did not have any effect in .cshrc + 63. fix "-c command" new core dump. + 62. more completions from Tom + 61. call catclose() before exiting, so that svr4 cleans up the symlinks before + exiting. + 60. Per's fix for insert-last-word + 59. Per's emacs abbreviation mode. + 58. Makefile fixes for catalog stuff. + 57. fixed again complete-word-raw and list-word-raw + 56. 6.05.05 - 03/11/95 + 55. Made %?str work again + 54. IRIX sigalarm problem should be fixed + 53. complete-word-raw and list-word-raw should work + 52. nls catalogs complete reworking. + 51. sh.init.c: Signal complete rewrite. + 50. Signal fixes from Bruce. + 49. Added promptchars, like histchars; affect %# in the prompt. The first + char is for the user and the second is for root. + 48. 6.05.04 - 03/03/95 + 47. Add NODOT config, $command [that holds the command passed with -c] + $GROUP and $group + 46. AFS fixes from Larry Schwimmer + 45. Real NLS catalogs from Michael Schmidt + 44. patch to allow ^? binding. + 43. completion patch from Paul DuBois. + 42. Don't spell check in here docs. + 41. Incorrect normalization of usec in sh.time.c + 40. directory printing and option parsing fixes [from Paul DuBois] + 39. realloc_searchlen should be static to avoid conflicts with OS's that + use the same malloc package. + 38. LOGINFIRST now applies to /etc/csh.login + 37. Fixes in bind compatibility code to bindkey. + 36. 6.05.03 - 01/17/95 + 35. Don't print the whole watchlist on startup. One can use explicitly + the log builtin for that. + 34. Don't display the $watch value in the log command. + 33. Don't delete the unmatched portion if we try to complete a spelling error. + 32. Solaris 2.4 workaround for isprint('\t') lossage (From Casper) + 31. Fixed csh bug: [Reported by Jaap] + set test="one\ + two\ + three" + echo "$test:q" + 30. Fixed the lossage in setting the looking mode in tw.parse.c before + calling t_search; $x/$y will not append the right suffix. + 29. Another attempt at the gethost timeout code. + 28. Cray dmmode and filetests -m -k [need documentation!] + 27. More manual patches. + 26. Don't glob the path; security problem and core-dump. [from beto] + 25. Avoid waiting for jobs that failed to restart, thus hanging the shell. + eg, run job in background, attach to debugger; kill it inside the + debugger. Get out of the debugger and you are stuck if you fg that job. + 24. 6.05.02 - 09/04/94 + 23. remhost code could pass the wrong length to getpeername() + 22. too eager sed'ing broke convex getwarpbyvalue() to getwarpbyvarval() + 21. Fixed new bindings bug. + 20. Fixed bug in newgrp code; execv was called incorrectly. + 19. Take into account programmable completion hints when spell checking. + 18. Unconditionally change stty modes in Rawmode() + 17. Change date in $version to be ISO 8601 per Keith's suggestion + 16. Fixed portability problems in the new counted-strings codes (From Kaveh) + 15. Fixed binding problem with the new counted-strings code [all key bindings + ended up in the extended map] + 14. 6.05.01 - 07/08/94 + 13. Changed key bindings to use counted strings instead of Null terminated + strings, so that binding ^@ works. + 12. Fix parsing bug, where words that contained keywords caused incorrect + word breaks: + switch (iftagd) + case iftagd: + echo It works + breaksw + default: + echo It is broken. + endsw + 11. Fix sh.c for systems with no job control. [the new hup builtin sends + SIGCONT]. + 10. Don't add the suffix character when all completions fail, from michael + 9. Added histdup=erase, that deletes the oldest duplicate instead of + the newest. + 8. Don't call .logout recursively if we receive more than one hup, + and don't process hangups when we execute the .logout. + 7. $logout was set to a static string. + 6. Non printable binding listing was broken. + 5. Recursive sourced scripts would get mangled up because of input buffer + confusion (thanks michael) + 4. M-space should not be counted as a space. Leads to infinite loop in + word splitting. + 3. Pyramid fixes. + 2. Fixed '\' in sysv echo (from Mika) + 1. Missed fix_yp_bugs() when setting REMOTEHOST (From Casper) + + +V6.05.00, 06/19/94 +113. 6.04.17 06/18/94 +112. Realloc debug fix from John. +111. Completion fixes from Bruce. +110. Added -b option to bind. +109. Added tcsh.man2html from Dave. Looks great! +108. 6.04.16 06/06/94 +107. Allow multi word glob in "`foo`" expressions. + > if ("`ls`" == "a b c") then +106. Michaels lex() buffer patch version 2. + the previous version core-dumped with + > sleep | echo +105. Fix seg fault in find_cmd, when path is unset. +104. 6.04.15 05/28/94 +103. the previous =~ fix, was a bit broken. +102. 6.04.14 05/25/94 +101. expression parser fix for !~ and =~. + if (foo =~ *) echo ok + the * was taken for a multiply and parsed as 0 * 0 returning 0. + and asked to match "foo" with "0" +100. Michael's lex() buffer patch. + 99. Bruce's Jumbo cleanup + 98. fixed Imakefile for X11R6 + 97. fixed argument parsing in source command. + 96. added $sched to format scheduled events. + 95. 6.04.13 05/07/94 + 94. added expand-command + 93. Alpha OSF-2.0 fixes + 92. 6.04.12 04/28/94 + 91. Ignoreeof patch from Bruce. + 90. Dan's completion fix. + 89. 6.04.11 04/12/94 + 88. Don't source .logout when killed with -HUP unless we are a login shell. + [ actually $loginsh controls the behavior now ] + 87. ISC-4.0 posix exec() bug workaround + (from Jonathan Broome ) + 86. Dan's patch for complete=enhance + 85. Kaveh's patches for memset, host.defs, _{U,G}ID_T + 84. 6.04.10 03/29/94 + 83. Pathname completion bug fixes... + 82. Completion pathname(p) changes: Completion 'C' -> 'X'. + Replaced 'p' with 'F' and added D,T,C. + 81. Next NLS fixes + (From Paul Nevai ) + 80. make spelling correction obey the current histchars setting. + 79. Fix rounding in limits so that 0 is a true 0. + (From Ken Lalonde ) + 78. 6.04.09 03/12/94 + 77. Alarm race with remotehost. + 76. If you have in your .cshrc + set savehist=(100 merge) + and execute + #!./tcsh + exec ps + you get no output; [fixed] + 75. setenv SHLVL -1; tcsh = Segmentation fault [fixed] + 74. 6.04.08 02/10/94 + 73. new machtype, ostype, vendor + 72. execute .logout on hangup. + 71. more man page fixes. + 70. 6.04.07 02/04/94 + 69. Dynamic hash changes, globbing for which command from Michael. + 68. INBUFSIZE fixes for history. + 67. printenv returns 1 when a variable is not found, like the non builtin one + 66. Add quotes to the mismatch array so that: + > touch foo + > mail "oo bar" + does not get corrected. The right fix would be to do correct parsing + and quote the space... + 65. NULL terminate mismatch[] array in ed.inputl.c, since it is used in + Strchr(). + 64. renamed stat to filetest + 63. Afs and Hesiod patches. + 62. More manual page patches. + 61. 6.04.06 12/19/93 + 60. Alarm for resolver timeouts (untested) + 59. Fixes for Henry Spenser's regex in the Makefiles + 58. Modifiers now work with $< and $< does not do :q by default. + [incompatibility with csh] and $< can be interrupted. + 57. Added $histdup. + 56. source /etc/.login for Solaris 2.x + 55. don't remove trailing spaces in history searches. + 54. dirs -L and dirs -S spurious warning elimination. + 53. man page fixes from David. + 52. Kimmo's patch [makefile, gcc warning, netdb.h include] + 51. 6.04.05 12/12/93 + 50. rewrote srcunit() to use st_save and st_restore. The code was + too messy to be useful before. + 49. recdirs and rechist patches again! + 48. Harris hck port, and ISC imake update + 47. Eliminate the x windows :display.screen before looking for the + hostname in REMOTEHOST + 46. Patch for CDF filetype() recognition (hpux) + 45. 6.04.04 11/12/93 + 44. Made =x obey nonomatch. + 43. Fixed rechist and recdirs not to depend on savehist and savedirs + 42. Removed aliases, bind, linedit builtins [ifdef'ed out as OBSOLETE] + 41. change REMHOST to REMOTEHOST for compatibility with SGI. + 40. $owd was not working correctly. + 39. Debugging printf elimination (from Kimmo) + 38. Typos in the new hup code in sh.c (from Matt) + 37. Imakefile fix for sequent (from Jaap) + 36. 6.04.03, 10/30/93 + 35. New manual page in place. + 34. Fixed Makefile sed RE to work with gnu sed. + 33. Added hup builtin. + 32. Added $REMHOST in config_f.h + 31. Fixed random parsing bug in sh.exp.c in isa(). It checked cp[1] + without checking cp[0] first... (should propagate to 4.4BSD) + 30. More sh.exp.c fixes from Bruce + 29. Always exit when the user types exit. + cat | tcsh -f -s + exit + ls + 28. savedirs fix and readlink() null termination fix from Peter. + 27. Added -p flag (force dirs printing in all directory functions and $owd + variable + 26. Let $dirstack work by default without needing to be set. + 25. Fixed history -h to work with other history flags. + 24. Renamed ed-functions more consistently (dcs) + 23. Added missing filetests (dcs) + 22. Added NEWGRP define in config_f.h (dcs) + 21. More fixes for non blocking io recovery from Bruce + 20. 6.04.02, 10/08/93 + 19. changed default prompt to %# + 18. New group 'g' completion. + 17. removed IIASA defs. + 16. fix for history -SL and dirs -SL to work when savedirs and savehist are + not set. + 15. fix magic-space to understand :p + 14. make :u,:l work for history. + 13. Fixes for non-blocking i/o recovery. trap all non blocking styles under + sunos. + 12. 6.04.01, 08/10/93 + 11. Vi mode word moves [they work like vi and don't obey wordchars anymore]. + 10. New file operators and stat builtin + 9. David's FIONREAD patch for SVR4 + 8. Bruce's ignoreeof=n patch + 7. Dan's complete/correct enhancement + 6. Abort corrections patch. + 5. Print_by_columns, now does not use the rightmost column. + 4. Renamed config/config.$i to $i to avoid once and for all filename length + problems. + 3. bbn butterfly config + 2. Beto's proc fixes + 1. Bruce's bug fix for ed.chared.c, signals + + +V6.04.00, 07/03/93 + 92. Alpha prototypes, for gcc -Wall clean compile. + 91. Fixed alpha hashing. Did not work for directories > 31, Thanks to + Dan Mosedale for all the help! + 90. Added USE(a) for unused parameters, to avoid compiler warnings. + 89. 6.03.10, 06/25/93 + 88. Makefile and lint patches from Bruce. + 87. Posixsig patch from Peter for svr4 + 86. 6.03.09, 06/11/93 + 85. signal handling broke with the last job control patch... + > (does-not-compute;) + would hang. + 84. don't quit after the first modifier fails: + > set i=aabbcc + > echo $i:s/a/A/:s/b/B/ + AaBbcc + > echo $i:s/x/A/:s/b/B/ + aabbcc + 83. Imakefile fixes for sequents from Jaap. + 82. Move past the bottom of input when we hit ^C, so that multi-line + input commands don't get trashed. + 81. Look only at the first word in ${EDITOR,VISUAL} to determine the + editor name. + 80. Last patch broke listmax. + 79. Remove extra sandbagging in exitstat(). Not needed anymore as value() + will never return NULL. + 78. Save $status before calling aliasrun() otherwise: + > alias precmd 'cd .' + > true + > echo $status + 0 + > false + > echo $status + 0 + 77. 6.03.08, 06/07/93 + 76. missing prototypes/unused variables under SYSV4. + 75. savedirs should glob the filename argument. + 74. 6.03.07, 06/05/93 + 73. Changed _Q, _Q1 macros in sh.lex.c, sh.dol.c, sh.char.? to _QF and _QB + because today 4.4BSD defined _Q to be ``Phonetics'' + 72. listmaxrows variable. + 71. set -r would not make existing variables readonly. + 70. print usernames with ~user where possible in dirs and job cwd's + 69. Mika's fixes (missing args in sh.c set(), linux Makefile, SIGCHLD) + 68. FIONREAD argument is int everywhere except on SunOS where it is long. + Tcsh used to think that it was long, and so it broke on the alpha where + sizeof(int) != sizeof(long) + 67. 6.03.06 05/16/93 + 66. Pipeline fixes. This should get rid of the dreaded Stopped tty output + message. + 65. Michael's fix for history buffer cleanup: + > alias foo 'echo \!:1:h' + > foo a/b + a + > ^P [nothing happens] + 64. Unsigned long rlimit type for 64 bit machines (alpha) + 63. Fixed Imakefile for alpha + 62. tilde expansion now obeys $nonomatch + 61. readonly veriables. 'set -r x=3' will set x to a very sticky 3... + 60. Fixed bug in the new tab'ed completion that interfered with old listing. + 59. Fixed entry -> item in tw.parse.c + 58. Added -f option to unlimit + 57. Define __STDC__ in Imakefile for Irix + 56. Static redeclarations in tw.parse.c + 55. 6.03.05 04/26/93 + 54. Don't echo history expansion in loops: + > alias junk 'foreach i (\!:2*) \ + foreach? echo \!:1 $i; \ + foreach? end' + > junk a b c d + echo a $i ; + a b + echo a $i ; + a c + echo a $i ; + a d + 53. Added complete-word-fwd and complete-word-back that scroll through + the list of possible completions... Neat addition from + jfink@csugrad.cs.vt.edu (Jeff "$DOTDIR" Fink) + 52. Workaround hpux9.01 broken optimizer in sh.glob.c where 'ls *' breaks. + 51. Michael's editor fix. With "magic margins" and 80 char width, try: + > set prompt= + 20aa76bac + 50. Reverted fix that does not glob the expanded back-quote text again. + 49. > cd /., echo $cwd + /. + Eliminate the . in this case... + 48. Matt's optimization in glob.c [retracted] + 47. Fixed bug with -S + 46. Renamed Makefile Makefile.std, and fixed the readme file + 45. 6.03.04 04/07/93 + 44. Changed -s == !-z and -S == socket + 43. Fixed typo in sh.c, in phup [shpgrp != pr->pgrp] + 42. Multi-line aliases are not entered into the history when executed. + 41. Changed f_seek to a union to avoid gcc warnings on 4.4BSD + 40. Fixed 'unset home; dirs' bug + 39. fixed $HOME->$home memory problem. + 38. $?0 returns false now on interactive shells for csh compatibility. + 37. Default watch inteval was 10 hours not 10 minutes as advertized in the + manual! + 36. Fixed clobbered veriable warning from gcc-1.39 in tw.parse.c + 35. Fixed typo with INVPTR in sh.lex.c + 34. 6.03.03 03/04/93 + 33. Eliminate 'Reset tty pgrp error message'. It is normal for the + walking process group stuff. Check about the killpg() above? + 32. More portability for 64 bit machines. + 31. Improved completion error messages. + 30. Fix bug with double globbing expansion on mirrored variables: + > setenv TERM '?vt100' + 29. Avoid hanging when writing to pipes etc. (From Paul Close) + 28. Typo in the $HOME->$home mirroring. + 27. %p %P 'p'recise time formats that include seconds for prompt strings. + 26. Signal list fixes from Paul Close. nsig is now a variable. + 25. 6.03.02 02/12/93 + 24. NEC SX3 "entry" is a reserved word!, changed entry to item... + [this is as bad as cray typedefining "word" to int. Next thing I know, + I'll have to prefix all the variables with tcsh_!] + 23. xxx + 22. Protected all include files to avoid warnings from lcc. + 21. Finally resolved the job control problems with linux and ISC (from Beto) + 20. More HUP,XFSZ,XCPU fixes. (with Beto) + 19. Dcanon would not canonicalize correctly in case where dnormalize() + failed to find a directory, but the directory existed when not + crossing the symbolic link. + 18. sh.init.c fixes; give 65 signals for all POSIX machines. + 17. AMS mail fixes and cmu wm handling. + 16. Setenv would not ignore trim quoted names... + > alias foo 'setenv "\!:1" bar' + > setenv FOO 123 + > foo FOO + > printenv + ... + FOO=123 + FOO=bar + ... + 15. 6.03.01 08/01/93 + 14. #undef SHORT_STRINGS gcc warning fixes... + 13. csh bug fix in foreach [quoteing problem] + > foreach i ("*") + > echo $i:q + > end + Should print * + 12. ls-F obeys showdots... + 11. After scheduled commands get executed, the editor could stay disabled + until the first enter. + 10. sigset() bug in ed.init.c; ^C could get disabled sometimes. + 9. Don't glob in dowhich(); otherwise \pat does not work if pat is aliased. + 8. When completion patterns are used $ and ~ expansion did not work right. + 7. Printenv builtin and long backquote expansion fix from Harald. + 6. $:-1, $:-0 enhancement from Paul and Michael. + 5. Lynx/OS patches + 4. Apollo bugs [Setenv -> tsetenv, typedef in pid_t] + 3. ^@ did not work correctly in bindkey. + 2. Fix vms/posix ifdefs in tc.alloc.c + 1. Elide gcc-2.3.1 warnings + + +V6.03.00, 11/20/92 +102. Solaris2 patches, renamed sunosX to sosX to fit in 14 character filenames. +101. 6.02.12 11/12/92 +100. Decreased BUFSIZE to 1K... +99. Don't use sbrk() in tc.alloc.c on VMS +98. EINTR error handling from Michael +97. Overwrite mode takes effect immediately, not delayed by a command. +96. Emx fixes. +95. SIGHUP gain... +94. Coherent times()/ fixes. +93. 6.02.11 10/27/92 +92. Mach setpath fixes. +91. Which now globs its arguments +90. Again POSIX SIGHUP fixes... Maybe we got it right this time... +89. Increased BUFSIZE to 4K. Smaller machines may want to decrease this. + [ Now one can edit up to 4K of buffer! ]. From Harald. +88. : is now a true builtin that does nothing, instead of being treated like + the last character of a label. This is so it can take args. From Harald. +87. More fixes for hpux limits from Harald. +86. Login shell if ppid == 1 and argc == 1 for VMS. +85. Typo in sh.exec.c from Harry. +84. Per's editor fixes. +83. 6.02.10 10/17/92 +82. Don't free STRNULL in freelex(). Update linked list in copylex() to + do the same insert as in lex(). +81. Fixed spurious tilde printing in %c prompt. +80. Fixed dumb wild free in AddXKey... + (thanks Harald for the complex bindings! :-) + > bindkey "\e10z" expand-line # Any editor command will do + > bindkey -[cs] "\e10z" "foo" # Any string or command will do + Free(%x) .... +79. coherent additions. +78. fixes for hpux8 resource limits [Thanks Harald] +77. 6.02.09 10/10/92 +76. More vms cleanups. +75. Removed #include CONFIGH from sh.h. There was no way to make it work + under VMS/POSIX +74. Added t completion (Gray Watson) +73. Memory leaks in sh.dir.c and sh.glob.c [thanks purify :-)] +72. IRIX 5.0 patches (from Paul Close) +71. BSD resource limits for hpux8.0 (From Andreas Stolcke) +70. NGROUPS_MAX fixes (from Matt Day) +69. 6.02.08 10/04/92 +68. VMS port additions. +67. Added $%var, which == strlen(var) +66. Added ^X^I and ^X^D to override programmable listing+completion +65. Added case insensitive globbing for OS/2 +64. FIOCLEX and FIONCLEX are only used if we don't have FD_CLOEXEC. +63. Added emx termio support, and emx pathsep support; emx compiles and runs: + needs job-debugging and finishing touches. +62. Horrible bug with the lex linked list; from Loic Grenie, grenie@ens.fr + > echo a !# + echoed 'echo a echo a echo'! +61. Shell -w,-x were incompatible with the same for test [POSIX] (beto) +60. builtin newgrp did not accept the - argument. +59. FIOCLEX for the masses (POSIX FD_CLOEXEC addition) +58. Old style csh completion bug fix [not used] (beto) +57. A background process waiting for input from tty + blocks when being foregrounded doesn't read its input and + doesn't get and signals. + It can only be killed from another session. (beto) + > cat > foo + #!/bin/csh -f + echo ">>>>>>" + set x = $< + echo $x + ^D + > chmod +x foo + > foo & + > fg + ^Z,^C # Nothing happens +56. history > 1000 fix (beto) +55. 6.02.07 9/18/92 +54. Added e_stuff_char() to put back a character in cooked mode in + the input stream... Useful for status (^T) +53. $? == $status and $# == $#argv like in the bourne shell. +52. Added $dirstack. Problems: off by one since =0 == $cwd, but + $dirstack[1] == $cwd... Suggestions welcome. +51. Leading spaces would confuse the run-help function. +50. Don't expand imported environment variables: + > setenv HOME \* + > tcsh + > echo "$home" + > echo "$HOME" +49. %C0n displays the number of directories omitted as /usr/local/bin /<2>bin/ +48. Added POSIXSIGS as a configuration option. +47. Per's fixes for history format and arrow key binding. +46. Expand-variables expands array variables too +45. 6.02.06 8/14/92 +44. Separated limit stuff from BSDTIMES and added BSDLIMIT +43. History searching inconsistent with HistLit: + > echo foo + foo + > ^foo^bar + bar + > ec[M-p] + echo foo +42. 6.02.05 8/8/92 +41. sourcing a script that contains 'onintr -; onintr' would disable + interrupts on the command line +40. cd ../... with symlinks=ignore would work !@#!@ +39. No more BACKPIPE for POSIX machines... +38. SUNOS NLS bug workarounds... +37. New HASHBANG define for #! emulation... even 386BSD does not have it + yet... +36. Added new -b -c file operators from SGI csh. +35. 6.02.04 7/23/92 +34. Walking process group fixes. +33. $0 contains now argv[0] when we are not executing a shell script. +32. New Getwd() was broken. +31. 6.02.03 7/17/92 +30. We kill our last foreground process group on HUP, for POSIX systems. +29. Walking process group fix. +28. $shlvl gets reset to 1 for login shells. +27. Macros can now involve multiple commands, i.e. + bindkey -s "^[OP" "ls\n^P" +26. 6.02.02 7/6/92 +25. nostat accepts now a list shell patterns. +24. Avoid print_exit_value in if ( { foo } ) +23. Symbolic key names for bindkey [arrow keys]. +22. Smarter getwd() that avoids some of the NFS hangs... +21. Use memmove() where possible. +20. 6.02.01 6/16/92 +19. Fix automatic correction to work with the new completion. +18. Globbing bug with brace expansion, when arguments need to be realloced... + e.g. echo 134{6,7}{0,1,2,3,4,5,6,7,8,9}{0,1,2,3,4,5,6,7,8,9} +17. shift and left operators update variables correcly ('shift path' did not + work) +16. apollo fixes for cd. +15. STRNULL <-> NULL bug fixes. +14. %S in xprintf for short strings. +13. history -LSc, dirs -LSc additions, builtins builtin [oxymoron] +12. history formatting string, who formatting string, prompt formatting + all use tprintf() now. +11. $history accepts a second formatting argument.. +10. History timestamps preserved in .history +9. Backquotes were broken: echo hi | cat > `echo foo` +8. SGI -t operator problem. +7. Dnix fixes. +6. Fix history file writing bug when autologout. +5. Change from TCSETA to TCSETAW, since we affect the output. +4. Per's fixes for display margin bugs. +3. Linux fixes. +2. Collapse adjacent stars in glob.c to avoid exponential behavior. +1. Fixed parseescape to put ^ literally if not followed by alpha. + + +V6.02.00, 5/15/92 +94. Default echo_style was not being set correctly. +93. $< did not work correctly with NLS chars. +92. 6.01.15 (5/11/92) +91. Minor cleanups in refresh code. +90. 6.01.14 (5/8/92) +89. Print \n in the right margin always to be consistent. +88. Linux patches. +87. 6.01.13 (5/2/92) +86. Fixes in listing and completion of non-unique commands. +85. Fix =stack entries > 9... from Bill Petro +84. Fix for last character at margin. [on terminals that have am & xm move + the cursor manually to the next line] +83. Fix for complete completions +82. small typo in tc.alloc.c from Mark Moraes. +81. small typo in tw.parse.c from Richard. +80. Man page fixes from Per. +79. 6.01.12 (4/24/92) [release version for 6.02] +78. Autosuffix was not getting reset all the time. +77. Don't limit completion patterns to 1K. +76. Naming changes in ed.screen.c from Justin. +75. 6.01.11 (4/10/92) +74. Fixed magic-space ! expand bug: + > echo a b123 45.{6,7} + > echo !:2!:3[magic-space] +73. Work-around for apollo optimizer in tc.bind.c +72. Problem with setjmp in tw.parse.c +71. symlinks=expand from Yumin. +70. tenematch() fixes from Michael; +69. 6.01.10 (4/3/92) +68. Fixed Gnmatch. +67. Removed ignore_symlinks and chase_symlinks. Replaced by symlinks variable. +66. Backquote from completion was broken for machines with no dup2() +65. No $printexitvalue for `` jobs. +64. Added ultrix stuff for PW_AUTH [from Mike Potter mpotter@lampf.lanl.gov] +63. Fixed bug in Gnmatch(), added 'N' command 'x' completion. +62. Fixed fg_proc_entry() so autologout gets disabled when a process + is foregrounded. +61. 6.01.09 (3/26/92) +60. source builtin takes arguments now that are passed in the script e.g.: + > ./tcsh -i a b c + > cat test + echo $argv + > echo $argv + a b c + > source test 1 2 3 + 1 2 3 + > echo $argv + a b c +59. Eliminate $margin_bug, add more intelligent margin code [from Justin] +58. expand_symlinks variable Urgh... +57. SGI CONTROL() fixes... +56. new dnormalize(), expand_symlinks flag. +55. interrupting completion restores the current line. [from Marc] +54. 6.01.08 (3/20/92) +53. inputmode affects the first line too. +52. Searches in vi do not destroy the current line. +51. -drwX test enhancement. +50. Generalized completion syntax and added more completion builtins. +49. Don't print '\n' on the right margin if we can avoid it. +48. 6.01.07 (3/9/92) +47. New completion style. [[[ ]],=] +46. 6.01.06 (3/7/92) +45. complete styles are ignored after shell metachars eg. + > complete mail =u + > mail christos < [tab] + completes filenames. +44. $echo_style is initialized to the default style of the machine. +43. SGI 4.0 CTRL() macro is busted. So we ignore it. +42. Fixed bug with the new margin code (thanks justin) +41. Fixed mirroring of variables. Now set and setenv affect + HOME, TERM, PATH, SHLVL, USER and their csh counterparts. Unset affects + affects only the csh copies of the variables, and unsetenv only the + environment variables. +40. Fixed gcc-2.0 warnings in sh.sem.c (needed for vfork() -O2 optimization) +39. 6.01.05 (2/21/92) +38. signal masking for BSD machines was still wrong in tw.init.c +37. Added $margin_bug, and now the editor outputs on the rightmost + column by default. This should fix the xterm cut-n-paste problem. +36. AU/X 2.0 and SGI compiles with POSIX as a default now. +35. sysv_echo is gone too. Now we have a variable called echo_style + which can be set to "none", "bsd", "sysv", "both" that defines + the builtin echo_style. The default is "bsd" for systems with + SYSVREL == 0, "sysv" otherwise. This can be overriden in config.h + by defining ECHO_STYLE ro be BSD_ECHO, SYSV_ECHO, BOTH_ECHO, + or NONE_ECHO. +34. asynchronous notification in run-fg-editor would try to change the + tty settings and print an extra prompt. + > set notify + > sleep 10 & + > vi^Z + > ^[^Z +33. alias x /bin/true + x? + reported .//bin/true instead of /bin/true +32. 6.01.04 (2/12/92) +31. fixed vi_substitute_line +30. binding completion addition. +29. showdots=-A addition +28. sysv_echo addition; deleted bsd_echo which is now the default. +27. dunique could crash. +26. Don't clear lines after an asynchronous notification, because it + might erase the message. +25. 6.01.03 (1/29/92) +24. `` were not working correctly when tcsh is started with 0,1,2 closed. +23. Correction was picking up the wrong thing in cases like .rhosts hosts +22. Correction with names with quoted spaces was broken. +21. Added sysv_echo and bsd_echo. +20. Added and documented the complete builtin. +19. Added dunique and cd -. +18. Per's fix for alarm functions. Things would break if time went backwards. +17. Realloc bug fix (copy min of old and new size) +16. Fix for csh compatible braces. +15. Brace globbing and negation globbing for Gmatch. +14. 6.01.02 (1/16/92) +13. Completion builtin, new tw* files. +12. 6.01.01 (1/6/92) +11. Changed w_ fields in tc.who.c to who_ to avoid redefinitions in + in some os's. +10. Setting savehist to an empty string makes savehist use the value + in $history. +9. echotc did not use the internal termcap descriptions. +8. echotc did not work right for single argument termcap strings. +7. DGUX needs SAVESIGVEC, updated type protection, and disabled CSWTCH. +6. Changed SVID to SYSVREL, since there is no SVID == 4 (yet). +5. Typo in tc.sig.h: UNRELSIGS was not getting defined. +4. Globbing bug fix. tglob() should ignore globbing characters inside + backquotes otherwise things get expanded twice: + % echo 'bar?' > 'foo?' + % echo `cat foo\?` + echo: No match. +3. Mach setpath fix. +2. Alliant process group fix. +1. Xenix fixes for broken vi and help path with no suffixes. + + +V6.01.00, 12/19/91 [for comp.sources.unix] +22. Restore the original prompt in automatic correction when the user + asks to re-edit the command. +21. Better error for unreadable files in tw.parse.c +20. Sequent patches. +19. (V6.00.08 beta 12/14/91) +18. Filenames containing # were spelled/expanded incorrectly. +17. Stellar/stellix port. +16. Hpux 8.0 has SIGWINDOW but we cannot get the window size. Protect + against window changes updating $LINES and $COLUMNS. +15. Mach setpath did not work right. +14. Mach does not need setenv in lib; in fact that does not work right. +13. shell level gets decremented when we exec. +12. restart_fg_editor picked the wrong editor if arg contained a slash. + e.g vi ~/.cshrc +11. (V6.00.07 beta 12/08/91) +10. Allow use of vfork() on systems that do not have job control. +9. Avoid NUMCC from being defined twice. +8. (V6.00.06 beta 12/05/91) +7. SunOS3's FIOCLEX dups... +6. Yet another globbing bug fix from Michael (echo .[^.]) +5. Ultrix now wants __ before cpp symbols. +4. Workaround sun's header files inconsistency so tcsh can be compiled + with #undef POSIX +3. Fixed limit stuff so that large values don't cause errors. +2. Fixed =1 and ~user error messages (Per) +1. (beta-5 6.00.04 == 6.00.05) + +$#* +$#* New numbering scheme (The last 2 digits are reserved for beta releases +$#* from now on. So we start at 6.00.06 which is 6.00.04 beta 6, and we are +$#* going to release 6.01.00... +$#* + +V6.00.04, (never released) +34. (beta-5 11/25/91) +33. Simplify code in BindArrowKeys() +32. Get rid of the PNULL's +31. Support for shadow password in locking code. (From Kimmo) +30. Normalize-path editor function. +29. (beta-4 11/21/91) +28. minix additions +27. bindkey fixes (-c addition, casting cleanups) +26. (beta-3 11/16/91) +25. Prompt length checking. +24. Michael's fixes for the watching code. Tcsh could core dump when using + a corrupted utmp. +23. overwrite mode flag, and autologout locking code. +22. overwrite mode would still insert digits! +21. Get the value of _POSIX_VDISABLE from pathconf... +20. Hpux 8.0 fixes. Sigstack botches with shared libraries. Ansi mode + static initialization of structures with prototyped function pointers + gives spurious warnings... +19. Onintr in /etc rc files is disabled. +18. (beta-2 11/03/91) +17. Multi-line aliases with `` bug fix. +16. Sticky emacs overwrite mode. +15. Autolist option. +14. Fix for redirection with wildcard filanames. +13. No error correction for multi-line commands. +12. Esix-4 re-defines p_pid. Argh... +11. (beta-1 10/28/91) +10. Foreach loops were broken again. +9. SUNOS localtime() bug does not only happen on the 8th byte. [Michael] +8. sh.dir.c, memory corruption in dinit(). Thanks Michael. +7. uts broken work-around, and has a wait3() +6. SGI (-t filename) extension, returns true when filename is a tty. +5. 'default:' addition in all switch() statements. +4. oflag was not being updated correctly in Rawmode() +3. missing 'break;' in prompt code '%y'. +2. infinite loop in :a code. +1. hashstat was not reporting hits+misses + + +V6.00.03, 10/21/91 +31. watch code now accepts shell patterns. +30. new hashing code portability fixes. +29. $foo:gs/:/ / fix and 'a' modifier addition. +28. Added $! (the pid of the last background job forked) +27. exec does not kill the shell when it fails. +26. Irix4.0 decls. +25. SVR4 uthost fixes from Kimmo Suominen +24. Imake addition from marc +23. New i-search from Per. +22. ibmesa fixes +21. convex fixes. +20. t command for vi. +19. SVR4 fixes (reverse pipeline and sigaction()) from David Dawes. +18. New hashing from Marc +17. Added : to the ~name separators so ~foo:~bar works. +16. New ed.init.c. Added ed.term.c +15. Still can't get the history exactly csh-like... !-2$ was broken... +14. vi character searches. +13. -Dvar=name command line option for the apollos. +12. Prompt format changes for date/directory. +11. Vi searches. +10. Emacs i-search. [currently not bound] +9. Vi additions ([dc]-{w,$,f},Undo) +8. tcsh -n parses now builtin structures. +7. seek to the end on errors in loops. +6. echotc -s was broken +5. Better !event parsing. !foo;!bar was broken. +4. foreach loops and if statements in aliases. +3. .cshdirs would corrupt the heap if some directories were not there. +2. System V echo was broken with \ +1. Fixed echo '!-1', history would eat the quote. + +V6.00.02, 08/05/91 [For comp.sources.unix] +8. tcsh will always set $LOGNAME and $USER if not already set in the + environment. +7. added $histfile. +6. echo `echo` * and echo ~ {} were broken +5. setty builtin addition +4. Multiple : modifiers [experimental, disabled with -DCOMPAT] +3. 7 bit fixes, and hp9000s500. +2. #undef DEBUG in tc.alloc.c, so we continue if we get a bad free() +1. getn() is now protected against NULL strings. + +V6.00.01, 07/16/91 +17. added beepcmd, and fixed small tenematch bugs. +16. Renamed DUP2 flag to HAVEDUP2 cause AIXPS2 defines DUP2 already. +15. More ANSI fixes, and mit additions (load-average) +14. don't clear ECHOE, background programs might need it. +13. Refresh bug fix... +12. getpwent() should not be interrupted (yellow pages), cause it might + leave dangling pointers, that endpwent() will trash. +11. ChangeSize is now responsible to set the screen size to something + sane, but it should not affect the environment if the information + it received is not valid +10. Find out if we are running under emacs using $TERM. It is more + reliable. +9. tcsh was broken if SHORT_STRINGS was not defined (glob() problem) +8. If GetSize() fails it should always return reasonable screen sizes. +7. globbing should not fail if one or more patterns match. +6. increased the number of aliases in the loop detection code. +5. DGUX has size_t and pid_t defined now... +4. ESIX does not have EWOULDBLOCK or EAGAIN & POSIX... That was not handled + correctly. +3. rs6000 needs BSDWAIT. +2. Hpux susp key could not be changed. +1. Apollo fixes. + +V6.00.00, 07/04/91 +45. Fixed quoting of VSTART/VSTOP on termios +44. Memory leak every time you pipe in or out. +43. echo {foo bar.[ch]}. Did not check for end of word. +42. ANSI prototypes +41. dmove() would leave the source descriptor open when using dup2() + e.g. + while (1) + echo foo >>! bar + end + runs out of file descriptors +40. recursive `` expanded via aliases would abort. +39. set home=../relative-path-name was broken. + e.g. + set home=../..; cd ..; + +38. Incorrect error when changing to directory: + e.g. + mkdir not-in-cd-path; chmod -x not-in-cd-path; cd not-in-cd-path; + echoed: + not-in-cd-path: No such file or directory. + it should have said + not-in-cd-path: Permission denied. +37. if ( \! =~ [\!] ) echo ok, did not echo ok. Quoting inside [] pattern. +36. More than 127 jobs caused job # to go negative +35. unsetenv ... Added support for more than one pattern. +34. More background process status report fixes. +33. Apollo builtin support. +32. Glob fix. echo '*' * was not handled properly. +31. Glob fix. setenv FOO `sleep 1` would either cause a segmentation fault. + or print ambiguous. +30. Glob fix. Quoted characters inside [] were not handled properly. +29. Removed TELL and VMUNIX defines. I think we cannot compile on V6 anyway +28. Overflow check for expansions. +27. Added matchbeep, shell pattern history searching. +26. Added code to handle /dev/std{in,out,err} +25. Fixed POSIX speed handling in raw mode. +24. Fixed a flushing bug in the filec code in sh.file.c +23. Compiled and added hp9000s700 to the list of hosts. +22. Fixed horrible bug in gmatch() + switch (4) + case [a-z]: + echo bug; + breaksw; + case 4: + echo ok; + breaksw; + endsw +21. Fixes for _SEQUENT_ ut_host. +20. FLUSHO added +19. mkdir foo\`bar; cd foo\`bar; was broken +18. EWOULDBLOCK == EAGAIN on RENO check for that too. +17. Dword() simplified and removed the gotos. +16. Hpux now compiles with POSIX. Moved the local chars modes in ed.init.c + after the tty modes. +15. Process group fixes for POSIX +14. We need on the suns for FIOCLEX!!! We did not close + our file descriptors before... +13. A/UX fixes. +12. History events that start with a number are not necessarily numeric: + > !3d + 3d: Event not fount +11. History loop detection added. + > alias a \!# + > b; a +10. Alias loop detection code was ineffective on eager optimizers. + 9. All errors should now go through our table. Next step we should + add nls error messages. + 8. Unsetenv now globs its arguments! Before it did not... + 7. Added tilde cache and -l flag. + 6. Added autocorrect + 5. Fixed for so that background jobs in scripts get process groups + 4. Fixed amazing memory leak in setenv()... + 3. Added short2qstr() so that we can form quoted strings to be used with glob() + 2. str2short and short2str allocate space dynamically. + 1. Fixed bug related to the is*() routines called with shorts. + [only if NLS and SHORT_STRINGS are defined]. + (The _ctype_ was getting indexed with shorts...) + 0. Complete overhaul. Brought in the 4.4 csh stuff. Separated most + tcsh and csh code except where I would have to add more global + variables. Compiled correctly with both lint and gcc -Wall on + a sparc running 4.1 + +V5.20.03, 03/20/91. - Never released +25. Kanji, SXA additions. +24. (exec foo) should not fail if they are suspended jobs. +23. Support kernel paging stuff on aix 370. +22. Now we handle correctly the environment variables LINES, COLUMNS, + TERMCAP for window size changes... +21. Tcsh 5.18c+ had broken NULL chars on scripts. + > cat > foo + #!/usr/local/bin/tcsh -f + echo "foo" + echo "^V^@" + echo "bar" + ^D + > chmod +x foo; foo + foo +20. Posix has EAGAIN and not EWOULDBLOCK +19. Don't set ECHOK; makes kill ^U ugly. +18. $shell is SHELLPATH and not $SHELL any more. +17. Added -n flag to cd, pushd, popd and dirs. Documented -l and -v + flags. +16. Documented and fixed chase_symlinks and ignore_symlinks. +15. Call endpwent() when you get interrupted... + cd ~chri^C + cd ~christos/ + +14. Exec when you have suspended jobs asks for verification. +13. Variable length fixes: + >set abcdefghijklmnopqrstuvwxyz=1 + >echo $abcdefghijklmnopqrstuvwxyz + abcdefghijklmnopqrs: Undefined variable + Now we have better messages too... +12. Icon fixes... +11. Quote expanded glob and history chars too. +10. If someone sets SHIN to O_NDELAY we died... Now we set it back... + 9. unset path; unsetenv PATH; ls-F; (poof) fixed... + 8. Patches for masscomp, and ${var123} lexical analysis fix... + 7. Patch for sunview bug: A partially covered suntool sends SIGWINCH every + time the text is scrolled, causing annoying redraw effects. Now tcsh + checks if the size really changed before doing anything. + 6. Interrupt in the middle of cwdcmd, and periodic does not remove the + aliases. + 5. prompt2 and prompt3 fixes: + Prompt2 now prints the status of the parser by default. + Prompt3 can now have the standard prompt escape sequences. + 4. eval file descriptor re-direction fix. + >set p='w | tail +3' + >eval $p + (originally | tail +3 was ignored) + 3. $edit != emacs anymore; it was misleading, 'set edit' enables editing + 'unset edit' disables it. + 2. PERROR define fix. + 1. irix3.3.1 line discipline fix. + +V5.20.02, 12/15/90. +32. /etc/Logout added and merged with /etc/Login flag. +31. Fixed tty chars in ed.init.c. Some of them were not handled correctly. +30. Command execution does not leak memory any more, and doing + ~ four times does not core-dump. +29. Fixed the notorious csh 'if(' bug (part of the convex fixes) +28. Intelligent getwd() on startup, and canonicalization. +27. Intelligent directory stack. Gets updated when $HOME changes. +26. Directory stack/save-restore additions +25. Convex Fixes. +24. Fixed onlret, and echonl getting stuck on svid. +23. Shouldn't leave tty in raw mode at auto-logout (e.g. when su'ing from a + csh, this is annoying). +22. Some users had environment EMACS set to something, and with my bad fix + at pl 1 found that they didn't have echo... (of course, even before my + "fix", they didn't have editing...). Anyway, refined the check to be + for EMACS=t, which is what emacs sets when running a subshell. +21. kill -CONT %job, would not update the status of the job, but it would + just restart it. +20. Sequent fixes. +19. AIX370 signal and TCF fixes. +18. fixed ls-F -l, SIGINT problem. +17. aix on the ps2 does not have strcoll() either. +16. Bind [A - [D and OA to OD in vi mode to the arrow key functions + so that they work from insert mode. +15. %~ was not working correctly for /home/news and /home/newsbin... +14. Removed Rcs Log +13. ISC unix fixes. +12. sunos3.x wants not +11. Remove precmd's, cwdcmd's and periodic cmds that had errors. +10. Compile sunos4.1 using termio. + 9. Rs6000 line discipline fixes. + 8. T_Tabs was wrong for termio machines. + 7. Don't bind single keystroke arrow keys, when they are already bound! + 6. Test for newline and tab before deciding not to send shell scripts + to the bourne shell. + 5. Added LITERAL prompt stuff. + 4. Fixed gethostname() in sh.rest.c to return the nodename. + 3. Do not quote spell checked stuff. This is not very intelligent but + works better than before. + 2. Fixes for relative path components. (paths that start with a .) + 1. Fixed so that Rawmode() is not called when we are not editing + (breaks running under emacs) + +V5.20.01, 11/15/90. +12. Recognize environment variables too. +11. Always start in Rawmode() +10. don't try to execute binary files using the bourne shell. + 9. Vi change to end of line updates correctly now. + 8. Prompt in continuation lines. + 7. Prompt in if statements fix. + 6. System V ^C works right now. + 5. ^Z works correctly in bindings + 4. Better error messages for variables. + 3. dinit() now is more robust. + 2. Added aux2.0 patches. + 1. Fixed bug with arrow key bindings in ed.screen.c. All the keys + were bound to up-history! + +V5.20.00, 11/10/90. +26. Fixed system V and POSIX time reporting. +25. Fixed ed.screen.c so that it does not use malloc(). +24. Fixed SIGWINCH on the iris +23. Fixed ed.screen.c, so that settc works correcly. It used to set + the termcap with a string that was allocated from the stack! +22. Fixed listing of commands, where the last command was not checked. +21. Fixed which command. It did not work for + \, if command was aliased. +20. Eliminated CSH4.3 define. You've had enough time to upgrade from 4.2 +19. Fixed GotTermCaps to be called only once. +18. Added bindkey -r +17. Attributes were not getting reset correctly. +16. history -t does not print the time-stamp. +15. AddXkey, works now for single character xkeys. +14. filetype() knows better about symlinks. +13. ls-F works with filenames that have metachars +12. Completion/spelling works with quoted things. +11. Fixed refresh bug. Repeat by: + On an intelligent terminal that has insert and delete chars (xterm) + > orphan + > vi orphan.c + > ^P^P +10. Fixed so that if we don't have a tty on stdin editing is disabled. + 9. Check for nested process forking, to avoid loops such as: + > alias foo 'set bar=`foo`' + > foo + 8. Fix setting of AsciiOnly (Per) + 7. tw.spell.c, defined F_OK for systems that don't have it. + 6. ourwait.h had typo in ifdef. + 5. BSD compilers need a cast to int for enums used in + switches (Matthew Day) + 4. Found the cause for the core-dump in long backquote + expansions (Mark Davies) + 3. Some externs in ed.h needed to be truly externs... + reported by Mark Davies, bug appeared only on hp9000s800. + 2. Changed $tcsh, and $version strings. + 1. Added internal sprintf function, renamed putchar to CSHputchar, + printf to CSHprintf, sprintf to CSHsprintf. + +V5.19.02, 10/23/90. +36. Added /etc/cshrc for the SGI irises. +35. Added expand-variables function. +34. Documented $time in tcsh.man +33. Shell variables are now 'recognized' when expanding/listing things. +32. ls-F does not eat the last slash on the / directory! +31. Strings bound to keys are printed inside double quotes. +30. History now remembers the exact line, not just an unparsed version of + the tokens. +29. Renamed itoa to Itoa(), so things in libc that use itoa() don't break. +28. Ported to IBM aix/ps2. +27. Fixed eval so that it forks when the output is piped + Repeat by: + > who | grep $user + > eval who | grep $user +26. Fixed so that 'nice ' does not + nice or fork. + Consider doing: + nice cd /tmp && rm *.c (don't try it!!!) + [what actually happens is that nice has to fork, then the child executes + chdir, and the parent stays where it was] +25. Added Dan's patches (nls, builtin bindkey, fixes to the editor). +24. Added aix370, migrate, getspath, getspath, getxvers, setxvers +23. Added builtin echotc, removed sl and el. +22. Ported to 4.4 BSD. This involved changing the way lots of flags worked, + cleanup of the SVID stuff, and addition of more compilation flags. + Now POSIX can work whed BSD is defined... +21. Fixed so that el, sl work. Actually they are to be removed soon and + be replaced with echotc. +20. Avoid the Quoted Space hack for alias when printing jobs! + [aliases to the same name avoid further alias expansion, by + inserting a quoted space in front of the command. In SHORT_STRINGS + QUOTE is the 15th bit so print ignores it thinking it is the + end of the string. So we just skip the Quoted Space....] + Repeat by: + > set notify + > alias ls ls -F + > (ls) & + Prints Exit 0 ( + Should print: Exit 0 ( ls -F ) +19. Fixed so that "", '', ``, all produce ': Command not found', + and not the spurious messages. + Repeat by: + > set path = (/bin /usr/bin .... .) + > "" + /some/path/name/: Command not found +18. Enable the use of macros if they exist and NLS is defined. + NLS code is not ready yet. +17. Fixed rmstar and continue_jobs code, so that they are not compile + options, but shell variables. Now you need to 'set rmstar' to get + enable rmstar. +16. Fixed SIGWINCH, SIGWINDOW, and setting of li, co, that broke + suntools, and others. + Repeat by: + Start a shelltool of size other than 80x34 + > telltc + > stty -a + do not report the same number of lines and columns. +15. More fixes to tw.parse.c, and tw.spell.c. +14. More fixes to sh.char.c. +13. Fixed coredump caused by ``. +12. Fixed spell-line code.. +11. Trapped SIGCHLD in sh.sem.c, while forking. Still there is a small + race, but the probability of happening is smaller! +10. Fixed sh.char.c to be ISO compliant. + 9. Added expand-glob + 8. Fixed ourwait.h for little endians. + 7. Fixed that foreach i (^D expands correctly. + 6. Fixed so that listmax is ignored in ls-F. + 5. Fixed spelling correction so that single letter words and words that + contain globbing chars do not get spell checked. + 4. Changed NeXT HOSTTYPE to next, since all HOSTTYPE's are lower case. + 3. Fixed symmetry, and changed symmetry HOSTTYPE from sequent to symmetry. + 2. Added boldfacing, underlining chars. + 1. Added IRIX3.3.1 support. + +V5.19.01, 9/26/90. + 7. Brought the README file up-to-date, and changed the bug report + address to point to me. + 6. sh.lex.c. In addla(), overflow computation was wrong. + 5. Fixed SHELLPATH, to be set correctly when $SHELL is not set. + 4. Fixed print statement in sh.proc.c that contained \215. + 3. Fixed the Makefile and MAKEDIFFS so that a tahoe diff can be made. + 2. RS6000: hacked around execv bug, and ed.init.c warning. + 1. Editor should not be enabled when we don't have a tty. Property changes on: vendor/tcsh/6.13/contrib/tcsh/Fixes ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/Imakefile =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/Imakefile (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/Imakefile (revision 131964) @@ -0,0 +1,624 @@ +XCOMM +XCOMM $Id: Imakefile,v 1.83 2003/02/08 20:03:25 christos Exp $ +XCOMM +XCOMM Imakefile for tcsh 6.12 +XCOMM Marc Horowitz, MIT SIPB +XCOMM + +#ifdef DestDir +#undef DestDir +#endif +#ifdef ManSuffix +#undef ManSuffix +#endif + +/* All config options go in a separate file. */ + +#include "imake.config" + +#ifndef HasGcc +# define HasGcc 0 +#endif + +#ifndef HasGcc2 +# define HasGcc2 0 +#endif + +/* This is a giant conditional block. It should be set up right for +platforms which are in here, but it may need to be changed for new +ones. Please send in your fixes and additions! */ + +/**** tcsh configuration defines ****/ + +/* specific platforms */ + +#ifndef ConfigH +# ifdef UltrixArchitecture +# define ConfigH ultrix +# endif + +# ifdef UxpArchitecture +# define ConfigH sysv4 +# endif + +# ifdef LinuxArchitecture +# define ConfigH linux +# endif + +# ifdef AlphaArchitecture +# ifndef LinuxArchitecture +# define ConfigH decosf1 +# endif +# if !HasGcc +# define MyCflags -std1 -Olimit 2000 +# else +# define NoCombineRegs +# endif +# endif + +# if defined(VaxArchitecture) && !defined(UltrixArchitecture) +# define ConfigH bsd +# endif + +# ifdef NeXTArchitecture +# define ConfigH mach +# endif + +# if defined(SunArchitecture) +# if (OSMajorVersion == 3) +# define ConfigH sunos35 +# else +# if (OSMajorVersion == 4) +# if (OSMinorVersion == 0) +# define ConfigH sunos40 +# else /* OSMinorVersion == 1 */ +# if (OSTeenyVersion == 3) +# define ConfigH sunos413 +# else /* OsTeenyVersion in [0,1,2] */ +# define ConfigH sunos41 +# endif +# endif +# define NoCombineRegs +# else /* OSMajorVersion == 5 */ +# if (OSMinorVersion < 3) +# if (OSMinorVersion < 2) +# define ConfigH sol2 +# else +# define ConfigH sol22 +# endif +# else +# if (OSMinorVersion < 4) +# define ConfigH sol23 +# else +# if (OSMinorVersion < 6) +# define ConfigH sol24 +# else +# define ConfigH sol26 +# endif +# endif +# endif +# define NoCombineRegs +# endif +# endif +# endif + +# ifdef HPArchitecture +/* For some stupid reason makedepend on HP requires this */ +DEPENDFLAGS = -o.o +# if (OSMajorVersion >= 8) +# define ConfigH hpux8 +# else +# define ConfigH hpux7 +# endif +# endif + +# ifdef CrayArchitecture +# define ConfigH cray +# endif + +# ifdef SGIArchitecture +# define ConfigH irix +# define UseLibBSD +# if (OSMajorVersion < 5) +# ifdef you_are_using_yp +# define UseSunLib +# endif +# if !HasGCC +# define MyStdc -D__STDC__ +# if SGICompilerMajorVersion < 4 +CCOPTIONS=-float # We don't want -cckr and -prototypes +# endif +# endif +# endif +# if (OSMajorVersion == 6) +# if (OSMinorVersion >= 2) +# undef UseLibBSD +# define ConfigH irix62 +# endif +# endif +# endif + +# ifdef IBMArchitecture +# undef UseLibBSD +# if (SystemV == YES) +# define ConfigH aix +# if OSMajorVersion < 3 +# if OSMinorVersion < 2 +# define UseLibBSD +# endif +# endif +# else +# define ConfigH bsd +# define AOSArchitecture +# endif +# endif + + +#ifdef AOSArchitecture +#define MyStdc -U__STDC__ +#endif + +# if defined(MipsBsdArchitecture) || defined(MipsSysvArchitecture) +# define ConfigH mips +# endif + +# ifdef DguxArchitecture +# define ConfigH dgux +# endif + +# ifdef ConvexArchitecture +# define ConfigH convex +# endif + +# if defined(SQNTArchitecture) || defined(SequentArchitecture) +# define ConfigH sequent +# endif + +# ifdef MacIIArchitecture +# define ConfigH mac2 +# endif + +# ifdef MinixArchitecture +/* Maybe conditional on MACH? */ +SYSSRCS=mi.termios.c mi.wait.h mi.varargs.h +SYSOBJS=mi.termios.${SUF} +EXTF=ma.setp.c vms.termcap.c +# else +/* Maybe conditional on MACH? */ +SYSSRCS=ma.setp.c +SYSOBJS=ma.setp.${SUF} +EXTF=mi.termios.c mi.wait.h mi.varargs.h vms.termcap.c +# endif + +# ifdef i386Isc +# if IscVersion != 202 +# define ConfigH isc +# define UseLibCposix +# else +# define ConfigH isc202 +# endif +# endif /* i386Isc */ + +# ifdef OpenBSDArchitecture +# define ConfigH bsd4.4 +# endif /* OpenBsdArchitecture */ + +# ifdef NetBSDArchitecture +# define ConfigH bsd4.4 +# endif /* NetBsdArchitecture */ + +# ifdef FreeBSDArchitecture +# define ConfigH bsd4.4 +# endif /* FreeBsdArchitecture */ + +# ifdef i386SVR4Architecture +# define ConfigH sysv4 +# ifdef DELL +# define NoCombineRegs +# endif +# endif + +#endif /* !ConfigH */ + +/* generic os's */ + +#ifndef ConfigH + +#if (SystemV == YES) +#define ConfigH sysv3 +#else +/* why this as a default? Why not? */ +#define ConfigH bsd +#endif + +#endif /* !ConfigH */ + +/**** libraries ****/ + +#if (SystemV == NO) || defined(HPArchitecture) || \ + defined(SQNTArchitecture) || defined(SequentArchitecture) || \ + defined(MacIIArchitecture) || defined(UseLibTermcap) +LIBTERMCAP = -ltermcap +#else +LIBTERMCAP = +#endif + +#if defined(SQNTArchitecture) || defined(SequentArchitecture) +LIBSQNT=-lsocket -linet -lnsl -lseq +#endif + +/* This may not be good enough - I don't have access to enough systems +to really test it. */ +#if (SystemV == YES) || defined(UseLibCurses) && !defined(HPArchitecture) +LIBCURSES = -lcurses +#else +LIBCURSES = +#endif + +#if defined(UseLibNet) +LIBNET = -lnet +#else +LIBNET = +#endif + +#if defined(UseLibSocket) +LIBSOCKET = -lsocket +#else +LIBSOCKET = +#endif + +#if defined(UseLibBSD) +LIBBSD = -lbsd +#else +LIBBSD = +#endif + +#if (defined(SGIArchitecture) && \ + (OSMajorVersion == 3) && (OSMinorVersion == 3)) || \ + defined(UseLibC_S) +LIBC_S = -lc_s +#else +LIBC_S = +#endif + +#if defined(UseLibSun) +LIBSUN = -lsun +#else +LIBSUN = +#endif + +#if defined(UseLibCposix) +LIBCPOSIX = -lcposix +#else +LIBCPOSIX = +#endif + +#if defined(UseLibInet) +LIBINET = -linet +#else +LIBINET = +#endif + +#if defined(UseLibDir) +LIBDIRECT = -ldir +#else +LIBDIRECT = +#endif + +#if defined(UseLibX) +LIBX = -lx +#else +LIBX = +#endif + +#if defined(UseLibIntl) +LIBINTL = -lintl +#else +LIBINTL = +#endif + +#if (HasLibCrypt == YES) +LIBCRYPT = -lcrypt +#else +LIBCRYPT = +#endif + +#if defined(MacIIArchitecture) || defined(UseLibPosix) +LIBPOSIX = -lposix +#else +LIBPOSIX = +#endif + +#if defined(ATTArchitecture) || defined(UseLibDirent) +LIBDIRECTENT = -ldirent +#else +LIBDIRECTENT = +#endif + +/* The order here is significant. Although nothing uses all of these, +some platforms which use more than one do care about the order. */ + +SYSLIBS = $(LIBPOSIX) $(LIBDIRECTENT) $(LIBTERMCAP) $(LIBCURSES) \ + $(LIBNET) $(LIBINTL) $(LIBSOCKET) $(LIBSUN) $(LIBBSD) $(LIBCPOSIX) \ + $(LIBINET) $(LIBDIRECT) $(LIBX) $(LIBC_S) $(LIBSQNT) $(LIBCRYPT) + +/* Past here, nothing should need to be changed to compile on a different +platform, unless you have a really weird architecture. */ + +#ifdef MyCC +CC = MyCC +#else +# if HasGcc +# if HasGcc2 +CC = gcc +# else +# ifdef NoCombineRegs +CC = gcc -finline-functions -fstrength-reduce +# else +CC = gcc -fcombine-regs -finline-functions -fstrength-reduce +# endif +# endif +# else +CC = cc +# endif +#endif + +#ifdef HESIOD +HESLIB = -L/usr/athena/lib -lhesiod +/* it seems to me that the -I shouldn't be necessary, but there seems +to be a bug in the Imake stuff, so here it is. */ +HESDEF = -DHESIOD -I/usr/athena/include +#else +HESLIB = +HESDEF = +#endif + +#ifdef AFS +#ifndef AFSDIR +AFSDIR = /usr/afsws +#endif +#ifdef AFS33 +#define AFS33LIB -laudit +#else +#define AFS33LIB +#endif +/* Auxilliary libs needed for AFS */ +/* Both HPUX and Solaris need the BSD libraries. We need -lc before + * the bsd library to avoid using any more of it than is necessary. + */ +#if defined(HPArchitecture) +#define AFSAUXLIB -lc -lBSD +/* This is probably a kludge, but so is imake. */ +#else +#if defined(SunArchitecture) && (OSMajorVersion == 5) +#define AFSAUXLIB -lsocket -lnsl -lc -lucb +#else +#define AFSAUXLIB +#endif +#endif /* AFSAUXLIB */ +AFSLIB = -L$(AFSDIR)/lib -L$(AFSDIR)/lib/afs -lkauth -lprot -lubik\ + -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ + $(AFSDIR)/lib/afs/util.a AFS33LIB AFSAUXLIB +AFSDEF = -DAFS -I$(AFSDIR)/include +#else +AFSLIB = +AFSDEF = +#endif + +/* This is encore specific, but I don't know what encore's #define is, +and it shouldn't hurt to have it here, so here it is */ +PARALLEL=12 # Make the multi-max run fast. + +#ifndef TcshTop +#define TcshTop /usr/local +#endif +TCSHTOP = TcshTop + +#ifndef ManSuffix +#define ManSuffix 1 +#endif +MANSUFFIX = ManSuffix + +#ifdef TcshPath +PATH_TCSHELL = TcshPath +TCSHPATH = -D_PATH_TCSHELL='"$(PATH_TCSHELL)"' +#else +TCSHPATH = +#endif + +#ifdef DestBin +TCSH_BINDIR = DestBin +#else +TCSH_BINDIR = $(TCSHTOP)/bin +#endif +#ifdef DestMan +TCSH_MANDIR = DestMan +#else +TCSH_MANDIR = $(TCSHTOP)/man/man$(MANSUFFIX) +#endif + +LOCALLIBS = + +#ifndef MyCflags +#define MyCflags +#endif + +#ifndef MyDefines +#define MyDefines +#endif + +#ifndef MyIncludes +#define MyIncludes +#endif + +#ifndef MyStdc +#define MyStdc +#endif + +#ifdef CDebugFlags +CDEBUGFLAGS = CDebugFlags +#else +# if HasGcc2 +CDEBUGFLAGS = -O2 +# else +CDEBUGFLAGS = -O +# endif +#endif + + +#ifdef HostType +HOSTTYPE=HostType +HTDEF = -DHOSTTYPE='"$(HOSTTYPE)"' +#else +HTDEF = +#endif + +DEFINES = $(TCSHPATH) $(HESDEF) $(AFSDEF) $(HTDEF) MyDefines MyCflags MyStdc +INCLUDES = -I. MyIncludes +#ifdef MyLibs +LDLIBS = MyLibs +#endif + +SUF = o +VERSION = 6.12 + +SHSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c \ + sh.char.c sh.exp.c sh.file.c sh.func.c \ + sh.glob.c sh.hist.c sh.init.c sh.lex.c \ + sh.misc.c sh.parse.c sh.print.c sh.proc.c \ + sh.sem.c sh.set.c sh.time.c glob.c \ + sh.char.h sh.dir.h sh.proc.h sh.h \ + sh.decls.h glob.h ${SYSSRCS} +SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ + sh.char.${SUF} sh.exp.${SUF} sh.file.${SUF} sh.func.${SUF} \ + sh.glob.${SUF} sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} \ + sh.misc.${SUF} sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} \ + sh.sem.${SUF} sh.set.${SUF} sh.time.${SUF} glob.${SUF} ${SYSOBJS} + +TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ + tw.comp.c tw.color.c +TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ + tw.comp.${SUF} tw.color.${SUF} + +EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ + ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h +EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ + ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} + +TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ + tc.func.c tc.os.c tc.os.h tc.printf.c tc.prompt.c \ + tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h tc.vers.c tc.wait.h \ + tc.who.c tc.h +TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ + tc.disc.${SUF} tc.func.${SUF} tc.os.${SUF} tc.printf.${SUF} \ + tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ + tc.vers.${SUF} tc.who.${SUF} + +MISCF = Makefile.std Fixes MAKEDIFFS MAKESHAR NewThings README FAQ \ + WishList config_f.h eight-bit.me glob.3 patchlevel.h \ + pathnames.h tcsh.man Ported src.desc Imakefile imake.config \ + README.imake complete.tcsh vmsreadme.txt Makefile.vms termcap.vms \ + snames.h host.defs gethost.c tcsh.man2html Makefile.in configure.in \ + Makefile.win32 +CONFSRCS=config/[a-z]* + + +SRCS = $(SHSRCS) $(TWSRCS) $(EDSRCS) $(TCSRCS) +OBJS = $(SHOBJS) $(TWOBJS) $(EDOBJS) $(TCOBJS) + +ALLSRCS= $(MISCF) $(SRCS) $(EXTF) + +AllTarget(tcsh) + +ed.defns.h: config.h ed.defns.c + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_ed_defns' >> $@ + @echo '#define _h_ed_defns' >> $@ + egrep '[FV]_' ed.defns.c | egrep '^#define' >> $@ + @echo '#endif /* _h_ed_defns */' >> $@ + +sh.err.h: config.h sh.err.c + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_sh_err' >> $@ + @echo '#define _h_sh_err' >> $@ + egrep 'ERR_' sh.err.c | egrep '^#define' >> $@ + @echo '#endif /* _h_sh_err */' >> $@ + +tc.const.h: config.h tc.const.c + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_tc_const' >> $@ + @echo '#define _h_tc_const' >> $@ + ${CC} -E $(INCLUDES) ${DEFINES} -D_h_tc_const tc.const.c | \ + grep 'Char STR' | \ + sed -e 's/Char \([a-zA-Z0-9_]*\)\[\].*/extern Char \1[];/' | \ + sort >> $@ + @echo '#endif /* _h_tc_const */' >> $@ + +config.h: config_f.h + cp config/ConfigH config.h + +$(OBJS): sh.err.h tc.const.h ed.defns.h + +tar.Z: + rm -f tcsh-${VERSION}.tar.Z + rm -rf tcsh-${VERSION} + mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z + rm -rf tcsh-${VERSION} + +tar.gz: + rm -f tcsh-${VERSION}.tar.gz + rm -rf tcsh-${VERSION} + mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz + rm -rf tcsh-${VERSION} + +shar: + rm -f tcsh-*.shar + rm -rf tcsh-${VERSION} + mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ + tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ + tcsh-${VERSION}/?*/set?* + rm -rf tcsh-${VERSION} + +catalogs: + @(cd nls; make catalogs) + +world: + $(MAKE) clean ; $(MAKE) depend ; $(MAKE) tcsh ; $(MAKE) install + +clean:: + rm -f ed.defns.h sh.err.h tc.const.h config.h tc.defs.* + rm -f tcsh.*.m tcsh.*.cat + +depend:: config.h ed.defns.h sh.err.h tc.const.h $(SRCS) tc.defs.c + +tc.defs.${SUF}: tc.defs.c sh.h + +tc.defs.c: gethost host.defs + @rm -f $@ + @echo "/* Do not edit this file, make creates it */" > $@ + ./gethost host.defs >> $@ + +ALIB=$(HESLIB) $(AFSLIB) $(SYSLIBS) +AINC=ed.defns.h sh.err.h tc.const.h sh.h + +NormalProgramTarget(tcsh, $(OBJS), $(AINC), $(LOCALLIBS), $(ALIB)) +NormalProgramTarget(gethost, gethost.${SUF}, $(AINC), $(LOCALLIBS), $(ALIB)) + +InstallProgram(tcsh,$(TCSH_BINDIR)) +InstallManPage(tcsh,$(TCSH_MANDIR)) +DependTarget() Property changes on: vendor/tcsh/6.13/contrib/tcsh/Imakefile ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/Makefile.in =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/Makefile.in (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/Makefile.in (revision 131964) @@ -0,0 +1,654 @@ +# $Id: Makefile.in,v 3.20 2003/03/12 19:14:50 christos Exp $ +# Makefile.in 4.3 6/11/83 +# +# C Shell with process control; VM/UNIX VAX Makefile +# Bill Joy UC Berkeley; Jim Kulp IIASA, Austria +# +# With an input editor, command completion, etc. and ported to all sorts of +# things; Paul Placeway, CIS Dept., Ohio State University +# +SHELL=/bin/sh +VERSION=6.12 +BUILD=tcsh$(EXEEXT) +VPATH=@srcdir@ +srcdir=@srcdir@ + +################################################################ +## CFLAGS. For various -D things, see config.h +################################################################ +# +# These are the default suffixes from .c to .o and -c to get there +# but to use the global optimizer on the mips boxes, see below +# +SUF=o +CF=-c + +CPPFLAGS=-I. -I$(srcdir) + +LFLAGS= +#LFLAGS= -Zn10000 # hpux lint + + +CFLAGS = @CFLAGS@ # This is set by autoconf. +#CFLAGS= -g # debug +#CFLAGS= -O # production +#CFLAGS= # Broken optimizers.... + +#CFLAGS= -g -pg -DPROF +#CFLAGS= -O -pg -DPROF + +# gcc 1.00-1.37 +#CFLAGS= -O -finline-functions -fstrength-reduce + +# gcc 1.37-1.40 +#CFLAGS= -O -fcombine-regs -finline-functions -fstrength-reduce +# add -msoft-float for 68881 machines. + +# gcc 2.0 +# On the sparc, don't use -O2; it breaks setjmp() and vfork() +#CFLAGS= -O + +# gcc-2.1+ +#CFLAGS= -O2 + +# lucid c on suns +#CFLAGS= -O5 + +# gcc 2.1 on linux +#CFLAGS= -O6 -fomit-frame-pointer + +# HP/UX 8.0, 9.0 +#CFLAGS= +O3 -Aa + +# Ultrix 4.2a +#CFLAGS= -O -Olimit 2000 + +# Intel Paragon OSF/1 with PGI compilers +#CFLAGS= -O -Mnodebug -Mnoperfmon + +# DEC Alpha OSF/1 +#CFLAGS= -O2 -Olimit 2000 ## Normal Optimization +#CFLAGS= -O3 -Olimit 2000 ## Full Optimization - may not work +#CF=-j +#SUF=u +#.SUFFIXES: .u + +# for silicon graphics (and other mips compilers) -- use the +# global optimizer! (-O3). +# On SGI 4.0+ you need to add -D__STDC__ too. +#CFLAGS= -O3 +#CFLAGS= -O3 -Olimit 2000 ## Ultrix 4.2a +#CF=-j +#SUF=u +#.SUFFIXES: .u ## Ultrix and gnu-make need that + +# mips systems +# CFLAGS= -O -systype bsd43 -Wf,-XNd5000 -Wf,-XNp6000 -Olimit 2000 + +# for at&t machines +#CFLAGS= -O -Ksd + +# Stardent Titan +#CFLAGS = -O -43 + +# Stardent Stellar or sunos4 /bin/cc or Solaris2.1 /opt/SUNWspro/bin/cc +#CFLAGS = -O4 + +# Intergraph clipper CLIX 3.1 +#CFLAGS= -w -O2 + +# Dnix 5.3 +#CFLAGS = -O -X7 + +# Pyramid OS/x +#CFLAGS = -OG + +# Multiflow (5M binary... if you choose -O5!) +#CFLAGS = -O5 -sb_trace 0 + +# DDE Supermax Unix SYSV Rel III. +# CFLAGS= -O3 + +# SINIX RMx00 +#CFLAGS= -O # -D_POSIX_SOURCE # -kansi + +# Apollo's with cc [apollo builtins don't work with gcc] +# and apollo should not define __STDC__ if it does not have +# the standard header files. RT's (aos4.3) need that too; +# you might want to skip the -O on the rt's... Not very wise. +# AIX/ESA needs -D_IBMESA on command line (this may disappear by GA) +#DFLAGS=-U__STDC__ +#DFLAGS=-D_IBMESA +# On aix2.2.1 we need more compiler space. +#DFLAGS=-Nd4000 -Nn3000 +# AU/X 2.0 needs a flag for POSIX (read the config file) +#DFLAGS=-Zp +# Tektronix 4300 running UTek 4.0 (BSD 4.2) needs: +#DFLAGS = -DUTek -DBSD +# VMS_POSIX needs: +#DFLAGS=-D_VMS_POSIX +# Multiflow and PCC compilers don't like void typedefs. +# You may also need -U__STDC__ if you use pcc (i.e. ibmrt aos4.3). +#DFLAGS=-DMULTIFLOW +#DFLAGS=-DPCC +# DELL SVR4 +#DFLAGS=-DDELL +#DFLAGS= +#DFLAGS=-D_PATH_TCSHELL='"${DESTBIN}/tcsh"' +## The following is set by autoconf. +DFLAGS = -D_PATH_TCSHELL='"${bindir}/tcsh"' @DFLAGS@ @CPPFLAGS@ + + +################################################################ +## LDFLAGS. Define something here if you need to +################################################################ +LDFLAGS= @LDFLAGS@ ## This is set by autoconf. +#LDFLAGS= ## The simplest, suitable for all. +#LDFLAGS= -s ## Stripped. Takes less space on disk. +#LDFLAGS= -s -n ## Pure executable. Spares paging over +# ## the network for machines with local +# ## swap but external /usr/local/bin . +#LDFLAGS= -s -n -Bstatic ## Without dynamic linking. (SunOS/cc) +#LDFLAGS= -s -n -static ## Without dynamic linking. (SunOS/gcc) +#LDFLAGS= -Wl,-s,-n ## Stripped, shared text (Unicos) +#LDFLAGS= -s -static ## Link statically. (linux) +#LDFLAGS= -s -N ## Impure executable (linux) + +################################################################ +## SBINLDFLAGS. Flags to build a tcsh suitable for installation in +## in /sbin under Solaris with gcc. See the "tcsh.sbin" +## target. +################################################################ +SBINLDFLAGS=-Wl,-R/etc/lib,-I/etc/lib/ld.so.1,-ldl,-Bstatic + +################################################################ +## LIBES. Pick one, or roll your own. +################################################################ +LIBES= @LIBS@ ## This is set by autoconf. +#LIBES= -ltermcap ## BSD style things +#LIBES= -ltermcap ## SunOS, HP-UX, pyramid +#LIBES= -ltermcap ## Linux +#LIBES= -ltermcap -lshadow ## Linux with PW_SHADOW +#LIBES= -ltermcap -lsec ## Tek XD88/10 (UTekV) with PW_SHADOW +#LIBES= -ltermcap -lsec ## Motorola MPC (sysV88) with PW_SHADOW +#LIBES= -ltermcap -lcs ## Mach +#LIBES= -ltermcap -lbsd ## DEC osf1 on the alpha +#LIBES= -ltermcap -lbsd ## Intel paragon +#LIBES= -ltermcap -lbsd ## Clipper intergraph +#LIBES= -ltermcap -lseq ## Sequent's Dynix +#LIBES= -ltermcap -lauth ## Ultrix with Enhanced Security +#LIBES= -ltermcap -ldir -lx ## Xenix 386 style things +#LIBES= -ltermcap -lndir -lsocket -ljobs ## masscomp RTU6.0 +#LIBES= -lcurses ## AIX on the rt +#LIBES= -lcurses ## TitanOS on the stellar +#LIBES= -ltermlib -lsocket -lnsl ## SysV4 w/o BSDTIMES or Solaris 2 +#LIBES= -lcurses ## SysV3 w/o networking +#LIBES= -lcurses -lnet ## SysV3 with networking +#LIBES= -lcurses -ldir ## SysV2 w/o networking & dirlib +#LIBES= -lcurses -ldir -lnet ## SysV2 with networking & dirlib +#LIBES= -lcurses -lbsd ## AIX on the IBM 370 or rs6000 or ps2 +#LIBES= -lcurses -lbsd ## ETA10 +#LIBES= -lcurses -lbsd ## Irix3.1 on the SGI-IRIS4D +#LIBES= -lcurses -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D w/o yp +#LIBES= -lcurses -lsun -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D with yp +#LIBES= -lcurses -lsocket -lbsd ## Amdahl UTS 2.1 +#LIBES= -lcurses -lsocket ## Intel's hypercube. +#LIBES= -lcurses -lsocket ## ns32000 based Opus. +#LIBES= -lcurses -lcposix ## ISC 2.2 without networking +#LIBES= -lcposix -lc_s -lcurses -linet ## ISC 2.2 with networking +#LIBES= -lcurses -lsec -lc_s ## ISC 2.0.2 without networking +#LIBES= -lcurses -linet -lsec -lc_s ## ISC 2.0.2 with networking +#LIBES= -lcurses -lintl -lcrypt ## SCO SysVR3.2v2.0 +#LIBES= -lcurses -lintl -lsocket -lcrypt ## SCO+ODT1.1 +#LIBES= -lposix -ltermcap ## A/UX 2.0 +#LIBES= -lposix -ltermcap -lc_s ## A/UX 3.0 +#LIBES= -ldirent -lcurses ## att3b1 cc w/o shared lib & dirlib +#LIBES= -shlib -ldirent -lcurses ## att3b1 gcc with shared lib & dirlib +#LIBES= -ltermlib -lsocket -lnsl -lc /usr/ucblib/libucb.a ## SysV4 with BSDTIMES +#LIBES= -lcurses -lnsl -lsocket -lc /usr/ucblib/libucb.a ## Stardent Vistra +#LIBES= -ltermc ## emx under OS/2 +#LIBES= ## Minix, VMS_POSIX +#LIBES= -ltermcap -lcrypt ## Multiflow +#LIBES= -ltermcap -lcrypt ## NetBSD +#LIBES= -lcurses ## DDE Supermax + +################################################################ +## EXTRAFLAGS and EXTRALIBS +################################################################ +# Compiling for AFS with kerberos authentication +#AFSLIBDIR = /usr/afsws/lib +#AFSDEF = -DAFS -I/usr/afsws/include +#AFS33LIB = -laudit +# +#Solaris and HPUX require the BSD libraries with AFS. +#We use -lc to use only what we require. +#AFSAUXLIB = -lsocket -lnsl -lc -lucb # Solaris +#AFSAUXLIB = -lc -lBSD # HPUX +# +#AFSLIB = -L$(AFSLIBDIR) -L$(AFSLIBDIR)/afs -lkauth -lprot -lubik\ +# -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ +# $(AFSLIBDIR)/afs/util.a $(AFS33LIB) $(AFSAUXLIB) +# + +EXTRAFLAGS = @HESDEF@ $(AFSDEF) +EXTRALIBS = @HESLIB@ $(AFSLIB) + + +# The difficult choice of a c-compiler... +# First, you should try your own c-compiler. +# Gcc -traditional is also a safe choice. +# If you think that you have good include files try gcc -Wall... +# If you want to take out -traditional, make sure that your sys/ioctl.h +# is fixed correctly, otherwise you'll be stopped for tty input, or you +# will lose the editor and job control. + +# This is for setting your C preprocessor value. +CPP = @CPP@ # This is set by autoconf. +# The -B tells gcc to use /bin/ld. This is to avoid using the gnu ld, which +# on the suns does not know how to make dynamically linked binaries. +CC = @CC@ # This is set by autoconf. +#CC= gcc -Wall -Wmissing-prototypes -Wstrict-prototypes -Wpointer-arith -Werror +#CC= gcc -Wall -pipe -B/bin/ # -ansi -pedantic +#CC= gcc -m486 -pipe -Wall # Generate code for Intel 486 (linux) +#CC= shlicc # BSDI2.1 w/ shared libraries +#CC= cc +#CC= occ +#CC= acc +#CC= pcc +#CC= hc -w +#CC= c89 # For VMS/POSIX +#CC= /bin/cc # For suns, w/o gcc and SVR4 +#CC= /usr/lib/sun.compile/cc # FPS 500 (+FPX) with Sun C compiler +#CC= /opt/SUNWspro/bin/cc # Solaris 2.1 +#CC= scc # Alliant fx2800 +#CC= cc -h0,ansi,novector,float0 # for NEC SX-4 +#CC= lcc -wa +ED= ed +AS= as +RM= rm +CXREF= /usr/ucb/cxref +VGRIND= csh /usr/ucb/vgrind +CTAGS= /usr/ucb/ctags +#XSTR= /usr/ucb/xstr +SCCS= /usr/local/sccs +PARALLEL=12 # Make the multi-max run fast. +#P=& # Use Sequent's parallel make +P= +prefix=@prefix@ +exec_prefix=@exec_prefix@ +bindir=@bindir@ +mandir=@mandir@ +MANSECT=1 +DESTBIN=${DESTDIR}${bindir} +DESTMAN=${DESTDIR}${mandir}/man${MANSECT} +# DESTMAN=${DESTDIR}/catman/man${MANSECT} # A/UX +# DESTMAN=${DESTDIR}/usr/share/man/man${MANSECT} # Stardent Vistra (SysVR4) +# DESTMAN=/usr/catman/1l # Amiga unix (SysVR4) +EXEEXT=@EXEEXT@ +FTPAREA=/usr/spool/ftp + +ASSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.char.c \ + sh.exp.c sh.file.c sh.func.c sh.glob.c sh.hist.c sh.init.c \ + sh.lex.c sh.misc.c sh.parse.c sh.print.c sh.proc.c sh.sem.c \ + sh.set.c sh.time.c sh.char.h sh.dir.h sh.proc.h sh.h \ + tw.color.c +PSSRCS= sh.decls.h glob.c glob.h mi.termios.c mi.wait.h mi.varargs.h ma.setp.c \ + vms.termcap.c +SHSRCS= ${ASSRCS} ${PSSRCS} +SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ + sh.char.${SUF} sh.exp.${SUF} sh.file.${SUF} sh.func.${SUF} \ + sh.glob.${SUF} sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} \ + sh.misc.${SUF} sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} \ + sh.sem.${SUF} sh.set.${SUF} sh.time.${SUF} glob.${SUF} \ + mi.termios.${SUF} ma.setp.${SUF} vms.termcap.${SUF} + +TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ + tw.comp.c tw.color.c +TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ + tw.comp.${SUF} tw.color.${SUF} + +EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ + ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h +EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ + ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} + +TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ + tc.func.c tc.os.c tc.os.h tc.printf.c tc.prompt.c \ + tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h tc.vers.c tc.wait.h \ + tc.who.c tc.h +TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ + tc.disc.${SUF} tc.func.${SUF} tc.os.${SUF} tc.printf.${SUF} \ + tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ + tc.vers.${SUF} tc.who.${SUF} + +PVSRCS= Makefile.std Makefile.vms Makefile.in Makefile.win32 +AVSRCS= Fixes MAKEDIFFS MAKESHAR NewThings README FAQ \ + WishList config_f.h eight-bit.me glob.3 patchlevel.h \ + pathnames.h tcsh.man Ported src.desc Imakefile imake.config \ + README.imake complete.tcsh vmsreadme.txt termcap.vms snames.h \ + host.defs gethost.c tcsh.man2html configure.in configure config.h.in + +VHSRCS=${PVSRCS} ${AVSRCS} + +CONFSRCS=config/* + +ALLSRCS= ${SHSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${VHSRCS} +DISTSRCS= ${PSSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${AVSRCS} + + +OBJS= ${SHOBJS} ${TWOBJS} ${EDOBJS} ${TCOBJS} + + +all: ${BUILD} + +tcsh$(EXEEXT):$(P) ${OBJS} + rm -f tcsh$(EXEEXT) core + ${CC} -o tcsh$(EXEEXT) ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} + +tcsh.sbin:$(P) ${OBJS} + rm -f tcsh.sbin core + ${CC} -o tcsh.sbin ${SBINLDFLAGS} ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} + +# Purify +pure:$(P) ${OBJS} + rm -f tcsh$(EXEEXT) core + purify `echo ${CC} | sed -e s,-B/bin/,,` -o tcsh$(EXEEXT) ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} +# OS/2 +#tcsh.exe: tcsh +# emxbind tcsh + +gethost: gethost.c sh.err.h tc.const.h sh.h + rm -f gethost + ${CC} -o gethost ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} $(srcdir)/gethost.c ${LIBES} ${EXTRALIBS} + +tc.defs.c: gethost host.defs + @rm -f $@ + @echo "/* Do not edit this file, make creates it */" > $@ + ./gethost $(srcdir)/host.defs >> $@ + +tcsh.ps: tcsh.man + rm -f tcsh.ps + -ptroff -t -man $(srcdir)/tcsh.man > tcsh.ps + + +.c.${SUF}: + ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< + +# _VMS_POSIX #module addition +#.c.${SUF}: +# @(echo '#module '`echo $< | sed -e 's/\./_/g'`; cat $<) > $*..c +# @echo ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*.c +# @${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*..c +# @mv $*..o $*.o +# @rm -f $*..c + + +# Don't do any special massaging of C files for sharing of strings!! +# it causes weird segmentation faults on some systems. +#.c.o: +# ${CPP} ${CFLAGS} ${CPPFLAGS} $*.c | ${XSTR} -c - +# ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} x.c +# mv -f x.o $*.o +# rm -f x.c + +#ed.init.o: ed.init.c +# ${CPP} ${CFLAGS} ${CPPFLAGS} $*.c | ${XSTR} -c - +# ${CC} -R ${CF} ${CFLAGS} ${CPPFLAGS} x.c +# mv -f x.o $*.o +# rm -f x.c + +#strings.o: strings +# ${XSTR} +# ${CC} -c -R xs.c +# mv -f xs.o strings.o +# rm -f xs.c + +##.DEFAULT: +## ${SCCS} get $< + +##.DEFAULT: +## co $< + +ed.defns.h: ed.defns.c + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_ed_defns' >> $@ + @echo '#define _h_ed_defns' >> $@ + grep '[FV]_' $(srcdir)/ed.defns.c | grep '^#define' >> $@ + @echo '#endif /* _h_ed_defns */' >> $@ + +sh.err.h: sh.err.c + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_sh_err' >> $@ + @echo '#define _h_sh_err' >> $@ + grep 'ERR_' $(srcdir)/sh.err.c | grep '^#define' >> $@ + @echo '#endif /* _h_sh_err */' >> $@ + +tc.const.h: tc.const.c sh.char.h config.h config_f.h sh.types.h sh.err.h + @rm -f $@ + @echo '/* Do not edit this file, make creates it. */' > $@ + @echo '#ifndef _h_tc_const' >> $@ + @echo '#define _h_tc_const' >> $@ + ${CPP} $(CPPFLAGS) ${DFLAGS} ${EXTRAFLAGS} -D_h_tc_const\ + $(srcdir)/tc.const.c | grep 'Char STR' | \ + sed -e 's/Char \([a-zA-Z0-9_]*\) *\[ *\].*/extern Char \1[];/' | \ + sort >> $@ + @echo '#endif /* _h_tc_const */' >> $@ + +csh.prof: ${OBJS} sh.prof.${SUF} mcrt0.${SUF} + rm -f csh.prof + ld -X mcrt0.${SUF} ${OBJS} -o csh.prof ${LIBES} -lc + +sh.prof.${SUF}: + cp sh.c sh.prof.c + ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} -DPROF sh.prof.c + +lint: tc.const.h ed.defns.h + lint ${DFLAGS} ${CPPFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} + +alint: tc.const.h ed.defns.h + alint ${DFLAGS} ${CPPFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} + +print: + @pr READ_ME + @pr makefile makefile.* + @(size -l a.out; size *.${SUF}) | pr -h SIZES + @${CXREF} sh*.c | pr -h XREF + @ls -l | pr + @pr sh*.h [a-rt-z]*.h sh*.c alloc.c + +vprint: + @pr -l84 READ_ME TODO + @pr -l84 makefile makefile.* + @(size -l a.out; size *.${SUF}) | pr -l84 -h SIZES + @${CXREF} sh*.c | pr -l84 -h XREF + @ls -l | pr -l84 + @${CXREF} sh*.c | pr -l84 -h XREF + @pr -l84 sh*.h [a-rt-z]*.h sh*.c alloc.c + +vgrind: + @cp /dev/null index + @for i in *.h; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done + @for i in *.c; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done + @vgrind -t -x -h Index index >/crp/bill/csh/index.t + +install-strip: install + +install: tcsh$(EXEEXT) + -mkdir -p ${DESTBIN} + -mv -f ${DESTBIN}/tcsh$(EXEEXT) ${DESTBIN}/tcsh.old + cp tcsh$(EXEEXT) ${DESTBIN}/tcsh$(EXEEXT) + -strip ${DESTBIN}/tcsh$(EXEEXT) + chmod 755 ${DESTBIN}/tcsh$(EXEEXT) + +install.man: tcsh.man + -mkdir -p ${DESTMAN} + -rm -f ${DESTMAN}/tcsh.${MANSECT} + cp $(srcdir)/tcsh.man ${DESTMAN}/tcsh.${MANSECT} + chmod 444 ${DESTMAN}/tcsh.${MANSECT} + +install.cygwin: install install.man + -mkdir -p ${DESTDIR}${prefix}/doc/tcsh + cp ${srcdir}/FAQ ${srcdir}/Fixes ${DESTDIR}${prefix}/doc/tcsh + cp ${srcdir}/NewThings ${srcdir}/README ${DESTDIR}${prefix}/doc/tcsh + cp ${srcdir}/WishList ${srcdir}/Y2K ${DESTDIR}${prefix}/doc/tcsh + perl ${srcdir}/tcsh.man2html ${srcdir}/tcsh.man + cp -rp tcsh.html ${DESTDIR}${prefix}/doc/tcsh + -mkdir -p ${DESTDIR}/etc/profile.d + -mkdir -p ${DESTDIR}/etc/postinstall + cp -p ${srcdir}/cygwin/etc/csh.* ${DESTDIR}/etc + cp -p ${srcdir}/cygwin/etc/profile.d/*.tcsh ${DESTDIR}/etc/profile.d + cp -p ${srcdir}/cygwin/etc/postinstall/tcsh.sh ${DESTDIR}/etc/postinstall + +# Amiga Unix +#install.man: tcsh.man +# compress tcsh.man +# cp tcsh.man.Z ${DESTMAN}/tcsh.Z +# chmod 444 ${DESTMAN}/tcsh.Z + +# Apple A/UX +#install.man: tcsh.man +# -rm -f ${DESTMAN}/tcsh.${MANSECT}.Z +# nroff -man tcsh.man | compress > ${DESTMAN}/tcsh.${MANSECT}.Z +# chmod 444 ${DESTMAN}/tcsh.${MANSECT}.Z + +clean: + ${RM} -f a.out strings x.c xs.c tcsh$(EXEEXT) tcsh.a _MAKE_LOG core gethost + ${RM} -f *.${SUF} sh.prof.c ed.defns.h tc.const.h sh.err.h tc.defs.c + ${RM} -f tcsh.*.m tcsh.*.cat + +veryclean: clean + ${RM} -f config.h config.status config.cache config.log Makefile tcsh.ps + ${RM} -f *~ #* + +distclean: veryclean + +tags: /tmp + ${CTAGS} sh*.c + +tar.Z: + rm -f tcsh-${VERSION}.tar.Z + rm -rf tcsh-${VERSION} + -mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z + rm -rf tcsh-${VERSION} + +tar.gz: + rm -f tcsh-${VERSION}.tar.gz + rm -rf tcsh-${VERSION} + -mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz + rm -rf tcsh-${VERSION} + +shar: + rm -f tcsh-*.shar + rm -rf tcsh-${VERSION} + -mkdir tcsh-${VERSION} tcsh-${VERSION}/config + cp ${ALLSRCS} tcsh-${VERSION} + cp ${CONFSRCS} tcsh-${VERSION}/config + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ + tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ + tcsh-${VERSION}/?*/set?* + rm -rf tcsh-${VERSION} + +catalogs: + @(cd nls; make catalogs) + +tcsh-${VERSION}.tar.Z: + rm -rf tcsh-${VERSION} + rm -f tcsh-${VERSION}.tar tcsh-${VERSION}.tar.Z DIFFS.[123] + -mkdir tcsh-${VERSION} + ./MAKEDIFFS bsd + mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh-${VERSION} + cp ${DISTSRCS} tcsh-${VERSION} + -mkdir tcsh-${VERSION}/config + cp ${CONFSRCS} tcsh-${VERSION}/config + cp Makefile tcsh-${VERSION}/Makefile.new + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z + rm -rf tcsh-${VERSION} + +tcsh.tahoe-${VERSION}.tar.Z: + rm -rf tcsh.tahoe-${VERSION} + rm -f tcsh.tahoe-${VERSION}.tar tcsh.tahoe-${VERSION}.tar.Z DIFFS.[123] + -mkdir tcsh.tahoe-${VERSION} + ./MAKEDIFFS tahoe + mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.tahoe-${VERSION} + cp ${DISTSRCS} tcsh.tahoe-${VERSION} + -mkdir tcsh.tahoe-${VERSION}/config + cp ${CONFSRCS} tcsh.tahoe-${VERSION}/config + cp Makefile tcsh.tahoe-${VERSION}/Makefile.new + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh.tahoe-${VERSION} | compress > tcsh.tahoe-${VERSION}.tar.Z + rm -rf tcsh.tahoe-${VERSION} + +tcsh.reno-${VERSION}.tar.Z: + rm -rf tcsh.reno-${VERSION} + rm -f tcsh.reno-${VERSION}.tar tcsh.reno-${VERSION}.tar.Z DIFFS.[123] + -mkdir tcsh.reno-${VERSION} + ./MAKEDIFFS reno + mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.reno-${VERSION} + cp ${DISTSRCS} tcsh.reno-${VERSION} + -mkdir tcsh.reno-${VERSION}/config + cp ${CONFSRCS} tcsh.reno-${VERSION}/config + cp Makefile tcsh.reno-${VERSION}/Makefile.new + tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) + tar cvf - tcsh.reno-${VERSION} | compress > tcsh.reno-${VERSION}.tar.Z + rm -rf tcsh.reno-${VERSION} + +ftp: tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z + cp tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z ${FTPAREA} + cp tcsh.man ${FTPAREA} + +autoconfigure: $(srcdir)/configure $(srcdir)/config.h.in + +$(srcdir)/configure: $(srcdir)/configure.in + cd $(srcdir) && autoconf + +$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +$(srcdir)/stamp-h.in: $(srcdir)/configure.in + cd $(srcdir) && autoheader + @echo timestamp > $(srcdir)/stamp-h.in + +# +# Dependencies +# +config.h: config_f.h + +TCH=tc.h tc.const.h tc.decls.h tc.os.h tc.sig.h +SHH=sh.h sh.types.h sh.char.h sh.err.h sh.dir.h sh.proc.h pathnames.h \ + sh.decls.h ${TCH} +TWH=tw.h tw.decls.h +EDH=ed.h ed.decls.h + +# EDH +EDINC=sh.${SUF} sh.func.${SUF} sh.lex.${SUF} sh.print.${SUF} sh.proc.${SUF} \ + sh.set.${SUF} tc.bind.${SUF} tc.os.${SUF} tc.prompt.${SUF} \ + tc.sched.${SUF} tw.parse.${SUF} tw.color.${SUF} +${EDOBJS} ${EDINC} : ${EDH} + +# SHH +${OBJS}: config.h ${SHH} + +# TWH +TWINC=ed.chared.${SUF} ed.inputl.${SUF} sh.exec.${SUF} sh.func.${SUF} \ + sh.set.${SUF} tc.func.${SUF} tw.color.${SUF} +${TWOBJS} ${TWINC}: ${TWH} + +# glob.h +glob.${SUF} sh.glob.${SUF}: glob.h + +# ed.defns.h +EDDINC=tc.bind.${SUF} tc.func.${SUF} tc.os.${SUF} +${EDOBJS} ${EDDINC}: ed.defns.h + +# tc.defs.o +tc.defs.${SUF}: tc.defs.c sh.h Property changes on: vendor/tcsh/6.13/contrib/tcsh/Makefile.in ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/README =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/README (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/README (revision 131964) @@ -0,0 +1,210 @@ +This is tcsh version 6.12. Tcsh is a version of the Berkeley +C-Shell, with the addition of: a command line editor, command and file +name completion, listing, etc. and a bunch of small additions to the +shell itself. + +Tcsh has been ported to most unix variants, and can be tinkered to work +in unix systems that it has not ported yet. See the Ported file for +a more complete list of ported systems and in the config directory for +a configuration file that matches your system. +Tcsh also runs under VMS/POSIX and OS/2+emx; the OS/2 port is not +complete yet. + +Feel free to use it. These changes to csh may only be included in a +commercial product if the inclusion or exclusion does not change the +purchase price, level of support, etc. Please respect the individual +authors by giving credit where credit is due (in other words, don't +claim that you wrote portions that you haven't, and don't delete the +names of the authors from the source code or documentation). + +To install tcsh: + +0) Try running "configure". If that works, goto step 6. + If you are using imake, try xmkmf and goto step 3. + If imake does not work, copy Makefile.std to Makefile. + +1) Look at the Makefile and make sure that you are using the right + compilation flags. + +2) Copy the appropriate for your machine and OS config file from the + config subdirectory into config.h. Consult the file "Ported" for + settings known to work on various machines. If you are trying to + compile tcsh on a machine for which there is no config file yet, + you will need to create a config file using as a template one of + the supplied ones. If you get tcsh working on a new machine, I'd + appreciate a copy of the config file plus additional information + about the architecture/OS. If you are creating a new config file, + look very hard at BSDJOBS, BSDSIGS, and BSDTIMES if you are running + a non-BSD machine. For vanila SysV, these would all be #undef-ed, + but others may vary (such as A/UX or HPUX). On a pyramid, compile + in the UCB universe even if you are running under the ATT universe + usually; it will work anyway, and you get job control for free. + +3) Look at config_f.h, and enable or disable any features you want. + It is configured the way I like it, but you may disagree. + If you do not have NLS, then locale.h will not be found. Undefine it + and things should work ok. On the other hand, if you have NLS you + might as well use it... + +4) Look at host.defs to make sure that you have the right defines to set + the environment variables "HOSTTYPE", "MACHTYPE", "OSTYPE" and + "VENDOR" correctly. If you need to make changes, PLEASE SEND THEM + BACK TO ME. + +5) You may want to adjust the TCSH_BINDIR and TCSH_MANDIR entries in + the Makefile. These are the directories that tcsh, and the tcsh.1 + man entry will be placed in when you do a "make install" and "make + install.man" respectively. If you decide to install tcsh somewhere + other than in /usr/local/bin/tcsh, you should #define _PATH_TCSHELL + "/your/installation/directory/tcsh" in pathnames.h. + +6) If you've changed any of the configuration variables you may need + to re-run configure. + +7) make + +8) Read the documentation while you are waiting. The file tcsh.man + is in standard [nt]roff -man format. If you like, you can run the + tcsh.man2html script (requires Perl) to generate an HTML version of + the manpage which you can read with Mosaic, lynx or other HTML browser. + +9) Test tcsh by typing ./tcsh to see that it has compiled correctly. + The history command should give a time stamp on every entry. + Typing normal characters should echo each exactly once. Control-A + should put the cursor at the beginning of the input line, but after + the prompt. Typing characters after that should insert them into + the line. If you have job control make sure that stopping and + restarting jobs works. Make sure you can ^C in the middle of the + input line. Also make sure that pipelines work correctly and there + are no races. Try 'echo | cat | cat | cat | cat | more' a couple of + times. If you have job control, try this command in the background + and bring it in the foreground when it stops for tty output. Also + make sure that the ioctl() modes are preserved. Get into vi, enter + and exit input mode and suspend it, background it and foreground it + again. After all that, lastly make sure that the tty process group + manipulation is happening correctly. Try ftp to some host. If your + passwd appears on the screen, you have lost /dev/tty. Otherwise + everything is fine. + +10) Once satisfied that tcsh is working correctly, complete the installation + by typing "make install" to install the binary, and "make install.man" to + install the documentation. Don't forget to look at complete.tcsh for + useful completions... + +11) Enjoy. + +12) PLEASE send any bug reports (and fixes), code for new features, + comments, questions, etc. (even flames) to: + + The tcsh bugs mailing list + tcsh-bugs@mx.gw.com + +Various: + +*************************************************************************** + +On sysv versions < 3.0 (not hpux) Doug Gwyn's public domain directory +manipulation library has to be installed. This library is available +for anonymous ftp from prep.ai.mit.edu:/pub/gnu/dirent.tar.Z +If the network is not installed, then there is a gethostname() +routine is tc.os.c, enabled by defining NEEDgethostname + +*************************************************************************** + +On BSDreno, in ttyname() closedir() is called twice and so the same +pointer gets free'd twice. tcsh's malloc is picky and it prints an +error message to that effect. If you don't like the message: + +1. Apply the following patch: + +*** /usr/src/lib/libc/gen/ttyname.c.orig Fri Jun 1 17:17:15 1990 +--- /usr/src/lib/libc/gen/ttyname.c Tue Oct 29 16:33:12 1991 +*************** +*** 51,57 **** + if (stat(buf, &sb2) < 0 || sb1.st_dev != sb2.st_dev || + sb1.st_ino != sb2.st_ino) + continue; +- closedir(dp); + rval = buf; + break; + } +--- 51,56 ---- + +Or: Comment the error printing out in tc.alloc.c +Or: Compile -DSYSMALLOC + + +*************************************************************************** + +From: Scott Krotz + +Tcsh has been ported to minix by Scott Krotz (krotz@honey.rtsg.mot.com). +Unfortunately the minix sed is broken, so you'll have to find a way to +make tc.const.h, sh.err.h, ed.defns.h which are automatically generated. +The easiest way to create them is to make a copy from unix, copying +minix to config.h, and then 'make sh.err.h tc.const.h ed.defns.h' + +The OS/dependent files are in mi.termios.h, mi.wait.h, mi.varargs.h + +You will get some warnings, but dont worry about them, just ignore +them. After tcsh has compiled and the gcc binary is converted to a +minix binary, remember to chmem it to give it more memory - it will +need it! How much you need depends on how many aliases you have, etc.. +Add at least 50000 to it. + +One last thing. You might have to make some links for include files so +that they are in the directories that tcsh is expecting while compiling. +I forget if I had to do this or not, but it should be fairly easy to sort +out. If it cant find any include files this is probably the reason. + +If you have any problems, please tell me. I can be contacted through +e-mail at: + +krotz@honey.rtsg.mot.com + +I also read comp.os.minix on a regular basis, so a note there will get +my attention also. + +Have fun! + +ps. The termios functions are provided by Magnus Doell and Bruce Evans. + Thanks, guys! + + +From: Bob Byrnes + +This is for minix 1.5 (straight out of the box from P-H) plus the i386 +patches from Bruce Evans. + +I cross-compiled on a Sun using gcc 2.1 with a target of i386-bsd +(using the minix include files instead of the bsd versions), and then +linked the resulting object files with similarly compiled crtso.o and +libc.a on vax (little endian) using a hacked version of ld which I put +together to generate minix executables instead of bsd a.out format. +What a kludge ... + +I compiled with -O2 -Wall ... So far I haven't noticed any problems +with the optimizer. + +In case anyone is contemplating compiling tcsh with bcc (Bruce Evan's +i386 compiler that comes with the minix386 upgrade package), don't bother. +It is some serious bugs that kill tcsh when compiled for 16-bit characters. +I can provide more details of bugs that I noticed for brave souls who want +to try, but it would be hard (and why bother if you can get gcc?). + +I can make the binary available to anyone who wants it (for example people +who can't get access to a cross-compiling environment, and who don't yet +have gcc running under minix). + + +*************************************************************************** + +If your compiler cannot handle long symbol names, add + +#include "snames.h" + +to your config.h file + + -- Christos Zoulas + christos@zoulas.com + Property changes on: vendor/tcsh/6.13/contrib/tcsh/README ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/WishList =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/WishList (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/WishList (revision 131964) @@ -0,0 +1,320 @@ + + [Home] WishList + + Home | RecentChanges | Preferences + _________________________________________________________________ + + Surprised by this behavior...is this a bug? + + (Goal: e.g. distinguish between completely numeric args/names and + those containing non-numerics) + + % touch 1023 pex103 pex103a 104a z101 16a02 1999 2001 2001_A_Space_Odyssey + % ls -1 *[^0-9]* + 104a + 16a02 + 2001_A_Space_Odyssey + pex103 + pex103a + z101 + # (great, looks good to me. Got everything containing a nonnumeric, no more, n +o less.) + + % foreach p ( 1023 pex103 pex103a 104a z101 16a02 1999 2001 2001_A_Space_Odyss +ey ) + foreach? if ( $p !~ *[^0-9]* ) echo $p + foreach? end + # (no output. Huh?) + + % foreach p ( 1023 pex103 pex103a 104a z101 16a02 1999 2001 2001_A_Space_Odyss +ey ) + foreach? if ( $p =~ *[^0-9]* ) echo $p + foreach? end + 1023 (!) + pex103 + pex103a + 104a + z101 + 16a02 + 1999 (!) + 2001 (!) + 2001_A_Space_Odyssey + # (Huh?) + + The [MAN page description] for =~ and !~ just refer to "(see [Filename + substitution])', but evidently there is a (unexplained) difference. + The actual filename globbing looks correct to me, but the pattern + matching operator behavior is unexpected, if I'm not missing + something. + + tcsh 6.09.00 + + - bhooglan + _________________________________________________________________ + + I'm a long-time faithful user of tcsh, and one thing has always bugged + me -- the need to type "rehash" at a prompt when adding a new command. + My suggestions is to change tcsh so before printing "Command not + found.", it first searches its entire path and rebuilds its hash + table. Only after doing this, and if the command is still not in the + path, then print "Command not found.". I realize there are some + extreme cases in which this is suboptimal, but in most cases with + normal users this would be a big win, and simplify the manual and + perhaps even the code. + _________________________________________________________________ + + Wish "tcsh -l" would accept other flags. At least "-c". + + Currently I can't get ssh to have the right environment unless it is a + login shell. The .ssh/environment doesn't work for me because I login + to different machines with different environments. One thing to do + would be to not have the different environment for login compared to + other shells, but what I would really like is something like... + + ssh remote_application_server "tcsh -l -c application" + + The "ssh -t" doesn't work for me and I don't know why. + + Thanks Tim + + Fix limit vmemoryuse in Linux + + In Linux tcsh is unable to limit vmemoryuse. This is because + RLIMIT_VMEM isn't defined, instead Linux has RLIMIT_AS which means the + same. On Google groups I found patches suggested by Komazaki at + http://groups.google.com/groups?hl=sv&lr=&ie=UTF-8&oe=ISO-2022-JP&selm + =m3snmczvfc.wl%40thinkpad.osk.3web.ne.jp.osk.3web.ne.jp and Ogawa + Hirofumi suggests a patch at + http://groups.google.com/groups?hl=sv&lr=&ie=UTF-8&selm=87snmba4id.fsf + %40devron.myhome.or.jp None of these patches seems to have been + included in version 6.12 as 6.12 still has this problem. + + /Henrik?? + + New idea: use last line (or n'th line) of output as input to new + command. + + I often find myself typing something like: + + >locate lshort + /usr/local/stow/share/texmf/doc/latex/general/lshort.dvi . . . + /usr/local/store/share/texmf/doc/latex/general/lshort.dvi + + >xdvi /usr/local/store/share/texmf/doc/latex/general/lshort.dvi + + Now the way I accomplish writing the last line, is by moving the mouse + over the last line, and the copy paste it. It would be very nice, if + the shell could keep the last n lines of output in a buffer. This way + one could avoid using the mouse by typing something like: + + >xdvi + + which would insert the last line of output, similarly could + insert the second last line of output. (the exact commands used is of + course configured via bindkey). + + This could save me a couple of times to the mouse everyday - + di010070@diku.dk + + The shell does not capture any output from commands it runs, so + this is really more a feature for the terminal (be it hardware + or software). --Kim + + Fix memory leak related to aliasrun(). Precmd, Cwdcmd etc. leak + memory. + + Fix migrate -site $$... Seems to hang... (aix370) + + Fix history in loops. + + New idea: sed operations on variables. + + Lots of people seem to like the idea to be able to do sed type + operations on shell variables. Maybe we can extend the syntax of the + variable editing to understand string operations. So I would like to + be able to use: + +> set a="this is a STRING" +> echo $a:[3-] +is is a STRING +> echo $a:[#] +16 +> echo $a:[6-7] +is +> echo $a:[-2] +ng +> echo $a:[-20] +Subscript out of bounds. +> echo $a:[2-20] +Subscript out of bounds. +> echo $a:[1-1]:u$a:[2-]. +This is a string. + + + + Fix pipelines that contain builtins so that they behave correctly. + + I tried to fix that (most of the code is in sh.sem.c, but it works + only for non POSIX machines cause otherwise the setpgid() I added + fails). + + Fix the correct code... How to do that involves A.I.... + + Rewrite the whole thing. It has taken to much beating over the + years... + + Add another hook like precmd to be executed after the prompt but + before the command. + + Add instructions for using configure in the README file. + + Make manual page references links in the HTML version of the manual. + + It is possible to match the words with ([0-9]) after them. Links could + be using the manual page CGI at http://www.tac.eu.org/cgi-bin/man-cgi + for content. + + Add OpenBSD?? to the Makefile, etc. + + A Csh compatability mode would be nice: I know tcsh is supposed to be + fully csh compatible, but csh scripts containing such constructs as + '$<' , 'if ( -d $file ) cd $file' or any of a great number of other + valid csh commands, will produce syntax errors or the like with tcsh, + which is frustrating when writing/maintaining csh scripts which have + to run on systems with only tcsh and systems with only csh. If such a + thing exists, I couldn't find it after searching the man page for two + hours, and it should be better documented + + Add hooks for command completion Either for a dynamically loaded + library, or a callback to another program that allows another pass to + complete the command. As a trivial example, the module could duplicate + the functionality of aliases. A tcsh_mud.so could define sigh, groan, + cheer, lol, etc to produce output if they weren't actually valid + commands. + + Properly deal with : in filename substitution + + Given something like + + blah.foo:*.foo + + expand it properly to something like + + blah.foo:baz.foo:bob.foo:bar.foo + + It already does this, if you have a file named like that... --Kim + + Directory commands don't handle blanks in filenames. If I have an + environment variable such as: + +% setenv TOMCAT '/c/Program? Files/Apache? Software Foundation/Tomcat? 5.0' +and then do the following, setenv complains that it has too many arguments. +% cd /tmp +% cd "$TOMCAT" +setenv: Too many arguments +% dirs +/c/Program? Files/Apache? Software Foundation/Tomcat? 5.0 /tmp +% pushd "$TOMCAT" +/c/Program? Files/Apache? Software Foundation/Tomcat? 5.0 +setenv: Too many arguments. +% pushd /tmp +/tmp /c/Program? Files/Apache? Software Foundation/Tomcat? 5.0 +% pushd +/c/Program? Files/Apache? Software Foundation/Tomcat? 5.0 /tmp +setenv: Too many arguments. + + Wish tcsh would feature fc (fix command) as in bash !Wish tcsh would + featuer fc (fix command) as in bash ! + + i wish for read-only CVS access to the sources (as i am on the + bleeding egde) + + Functions would be useful! As would being able to redirect stderr (or + other file descriptors) independently of stdout! -- Rohan Talip + + Don't complete commands with non-executable files. For example if I + have a file called README in a directory in the PATH, and I type R TAB + tcsh will complete README as a command. But README does not have the x + bit set, so it's kind of pointless to have that completion. + + --> Setting the shell variable "recognize_only_executables" will give + you this behavior. --Waz + + If I have in my .tcshrc: complete {cd,pushd} p/1/d/ and I type + "complete cd" at the shell prompt nothing is printed. It would be nice + if {cd,pushd} p/1/d/ was printed. + + --> I had programmed this feature a while ago but have not submitted + it because the implementation is not robust enough to keep TCSH from + crashing when special characters are part of the pattern. I'll get + back to it at some point! --Waz + + It would be nice if "set autolist" would be on by default. + + --- + + Unicode (UTF-8) doesn't seem to work. It's not even possible to "make + catalogs" in unicode environment. Also unicode support (and other + multibyte encodings) should depend on environment variables + (LC_CTYPE), not on "set dspmbyte". On unicode terminal translations + show empty characters instead of messages. + + In addition to message catalogs, there are more problems: +ipi:~/test/tcsh/bin> ls +tcsh ĺäö +ipi:~/test/tcsh/bin> set dspmbyte utf8 +ipi:~/test/tcsh/bin> ls ??? +ls: No match. + + Unicode is used more and more, and is default on many environments, so + this really should be fixed. --mpaananen + _________________________________________________________________ + + When I have a script called from complete I would like to have the the + existing text from the command line passed to that script so that it + can look at all existing words to detemine what it should output as + the completion list. + + For example: + + complete prog 'n/-x/`myscript`' + + Then when I do this: + + > prog -a A -b B -x + + The script would get 'prog -a A -b B -x ' which would allow the script + to base its -x completions on the options given for -a and -b (or if + they aren't present give nothing - or a message saying that they are + required). Setting a temporary environment variable before executing + the command would also work and would probably be safer. + + Perhaps this info is already available as a special variable that can + be manually passed to the script: complete prog 'n/-x/`myscript + $cmd_line`'? + + Update: I looked into this further by actually downloading the code + and looking through it. It doesn't seem that this information is + available anywhere, but I did manage to achieve what I wanted by + adding the following two lines around the call to tw_complete (line + 278, tw.parse.c 6.12.00): + + added> tsetenv(STRCURRCMDLINE, (Char *)&qline); + looking = tw_complete(cmd_start, &wordp, &pat, looking, &suf); + + added> Unsetenv(STRCURRCMDLINE); + + And I added a definition for STRCURRCMDLINE to be "CURRCMDLINE". + + This provides the environment variable CURRCMDLINE to any + script/program running under complete. The only issue I see is picking + a sufficiently obscure environment variable that noone else is likely + to use, but have it readable enough to understand what it is for. It + also shouldn't overwrite an existing ENV variable if it is already in + use. + _________________________________________________________________ + + Home | RecentChanges | Preferences + Edit text of this page | View other revisions + Last edited March 25, 2004 10:27 (diff) + Search: ____________________ Property changes on: vendor/tcsh/6.13/contrib/tcsh/WishList ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: vendor/tcsh/6.13/contrib/tcsh/complete.tcsh =================================================================== --- vendor/tcsh/6.13/contrib/tcsh/complete.tcsh (nonexistent) +++ vendor/tcsh/6.13/contrib/tcsh/complete.tcsh (revision 131964) @@ -0,0 +1,1185 @@ +# +# $Id: complete.tcsh,v 1.43 2004/02/22 15:57:15 christos Exp $ +# example file using the new completion code +# +# Debian GNU/Linux +# /usr/share/doc/tcsh/examples/complete.gz +# +# This file may be read from user's ~/.cshrc or ~/.tcsh file by +# decompressing it into the home directory as ~/.complete and +# then adding the line "source ~/.complete" and maybe defining +# some of the shell variables described below. +# +# Added two Debian-specific completions: dpkg and dpkg-deb (who +# wrote them?). Changed completions of several commands. The ones +# are evaluated if the `traditional_complete' shell variable is +# defined. +# +# Debian enhancements by Vadim Vygonets . +# Bugfixes and apt completions by Miklos Quartus . +# Cleanup by Martin A. Godisch . + +onintr - +if (! $?prompt) goto end + +if ($?tcsh) then + if ($tcsh != 1) then + set rev=$tcsh:r + set rel=$rev:e + set pat=$tcsh:e + set rev=$rev:r + endif + if ($rev > 5 && $rel > 1) then + set _complete=1 + endif + unset rev rel pat +endif + +if ($?_complete) then + set noglob + if ( ! $?hosts ) set hosts + foreach f ($HOME/.hosts /usr/local/etc/csh.hosts $HOME/.rhosts /etc/hosts.equiv) + if ( -r $f ) then + set hosts = ($hosts `grep -v "+" $f | grep -E -v "^#" | tr -s " " " " | cut -f 1`) + endif + end + if ( -r $HOME/.netrc ) then + set f=`awk '/machine/ { print $2 }' < $HOME/.netrc` >& /dev/null + set hosts=($hosts $f) + endif + if ( -r $HOME/.ssh/known_hosts ) then + set f=`cat $HOME/.ssh/known_hosts | cut -f 1 -d \ ` >& /dev/null + set hosts=($hosts $f) + endif + unset f + if ( ! $?hosts ) then + set hosts=(hyperion.ee.cornell.edu phaeton.ee.cornell.edu \ + guillemin.ee.cornell.edu vangogh.cs.berkeley.edu \ + ftp.uu.net prep.ai.mit.edu export.lcs.mit.edu \ + labrea.stanford.edu sumex-aim.stanford.edu \ + tut.cis.ohio-state.edu) + endif + + complete ywho n/*/\$hosts/ # argument from list in $hosts + complete rsh p/1/\$hosts/ c/-/"(l n)"/ n/-l/u/ N/-l/c/ n/-/c/ p/2/c/ p/*/f/ + complete ssh p/1/\$hosts/ c/-/"(l n)"/ n/-l/u/ N/-l/c/ n/-/c/ p/2/c/ p/*/f/ + complete xrsh p/1/\$hosts/ c/-/"(l 8 e)"/ n/-l/u/ N/-l/c/ n/-/c/ p/2/c/ p/*/f/ + complete rlogin p/1/\$hosts/ c/-/"(l 8 e)"/ n/-l/u/ + complete telnet p/1/\$hosts/ p/2/x:''/ n/*/n/ + + complete cd p/1/d/ # Directories only + complete chdir p/1/d/ + complete pushd p/1/d/ + complete popd p/1/d/ + complete pu p/1/d/ + complete po p/1/d/ + complete complete p/1/X/ # Completions only + complete uncomplete n/*/X/ + complete exec p/1/c/ # Commands only + complete trace p/1/c/ + complete strace p/1/c/ + complete which n/*/c/ + complete where n/*/c/ + complete skill p/1/c/ + complete dde p/1/c/ + complete adb c/-I/d/ n/-/c/ N/-/"(core)"/ p/1/c/ p/2/"(core)"/ + complete sdb p/1/c/ + complete dbx c/-I/d/ n/-/c/ N/-/"(core)"/ p/1/c/ p/2/"(core)"/ + complete xdb p/1/c/ + complete gdb n/-d/d/ n/*/c/ + complete ups p/1/c/ + complete set 'c/*=/f/' 'p/1/s/=' 'n/=/f/' + complete unset n/*/s/ + complete alias p/1/a/ # only aliases are valid + complete unalias n/*/a/ + complete xdvi n/*/f:*.dvi/ # Only files that match *.dvi + complete dvips n/*/f:*.dvi/ +if ($?traditional_complete) then + complete tex n/*/f:*.tex/ # Only files that match *.tex +else + complete tex n/*/f:*.{tex,texi}/ # Files that match *.tex and *.texi +endif + complete latex n/*/f:*.{tex,ltx}/ + complete su c/--/"(login fast preserve-environment command shell \ + help version)"/ c/-/"(f l m p c s -)"/ \ + n/{-c,--command}/c/ \ + n@{-s,--shell}@'`cat /etc/shells`'@ n/*/u/ + complete cc c/-[IL]/d/ \ + c@-l@'`\ls -1 /usr/lib/lib*.a | sed s%^.\*/lib%%\;s%\\.a\$%%`'@ \ + c/-/"(o l c g L I D U)"/ n/*/f:*.[coasi]/ + complete acc c/-[IL]/d/ \ + c@-l@'`\ls -1 /usr/lang/SC1.0/lib*.a | sed s%^.\*/lib%%\;s%\\.a\$%%`'@ \ + c/-/"(o l c g L I D U)"/ n/*/f:*.[coasi]/ + complete gcc c/-[IL]/d/ \ + c/-f/"(caller-saves cse-follow-jumps delayed-branch \ + elide-constructors expensive-optimizations \ + float-store force-addr force-mem inline \ + inline-functions keep-inline-functions \ + memoize-lookups no-default-inline \ + no-defer-pop no-function-cse omit-frame-pointer \ + rerun-cse-after-loop schedule-insns \ + schedule-insns2 strength-reduce \ + thread-jumps unroll-all-loops \ + unroll-loops syntax-only all-virtual \ + cond-mismatch dollars-in-identifiers \ + enum-int-equiv no-asm no-builtin \ + no-strict-prototype signed-bitfields \ + signed-char this-is-variable unsigned-bitfields \ + unsigned-char writable-strings call-saved-reg \ + call-used-reg fixed-reg no-common \ + no-gnu-binutils nonnull-objects \ + pcc-struct-return pic PIC shared-data \ + short-enums short-double volatile)"/ \ + c/-W/"(all aggregate-return cast-align cast-qual \ + comment conversion enum-clash error format \ + id-clash-len implicit missing-prototypes \ + no-parentheses pointer-arith return-type shadow \ + strict-prototypes switch uninitialized unused \ + write-strings)"/ \ + c/-m/"(68000 68020 68881 bitfield fpa nobitfield rtd \ + short c68000 c68020 soft-float g gnu unix fpu \ + no-epilogue)"/ \ + c/-d/"(D M N)"/ \ + c/-/"(f W vspec v vpath ansi traditional \ + traditional-cpp trigraphs pedantic x o l c g L \ + I D U O O2 C E H B b V M MD MM i dynamic \ + nodtdlib static nostdinc undef)"/ \ + c/-l/f:*.a/ \ + n/*/f:*.{c,C,cc,o,a,s,i}/ + complete g++ n/*/f:*.{C,cc,o,s,i}/ + complete CC n/*/f:*.{C,cc,cpp,o,s,i}/ + complete rm c/--/"(directory force interactive verbose \ + recursive help version)"/ c/-/"(d f i v r R -)"/ \ + n/*/f:^*.{c,cc,C,h,in}/ # Protect precious files + complete vi n/*/f:^*.[oa]/ + complete bindkey N/-a/b/ N/-c/c/ n/-[ascr]/'x:'/ \ + n/-[svedlr]/n/ c/-[vedl]/n/ c/-/"(a s k c v e d l r)"/\ + n/-k/"(left right up down)"/ p/2-/b/ \ + p/1/'x:'/ + + complete find n/-fstype/"(nfs 4.2)"/ n/-name/f/ \ + n/-type/"(c b d f p l s)"/ n/-user/u/ n/-group/g/ \ + n/-exec/c/ n/-ok/c/ n/-cpio/f/ n/-ncpio/f/ n/-newer/f/ \ + c/-/"(fstype name perm prune type user nouser \ + group nogroup size inum atime mtime ctime exec \ + ok print ls cpio ncpio newer xdev depth \ + daystart follow maxdepth mindepth noleaf version \ + anewer cnewer amin cmin mmin true false uid gid \ + ilname iname ipath iregex links lname empty path \ + regex used xtype fprint fprint0 fprintf \ + print0 printf not a and o or)"/ \ + n/*/d/ + + complete -%* c/%/j/ # fill in the jobs builtin + complete {fg,bg,stop} c/%/j/ p/1/"(%)"// + + complete limit c/-/"(h)"/ n/*/l/ + complete unlimit c/-/"(h)"/ n/*/l/ + + complete -co* p/0/"(compress)"/ # make compress completion + # not ambiguous +if ($?traditional_complete) then + complete zcat n/*/f:*.Z/ +else + # "zcat" may be linked to "compress" or "gzip" + if (-X zcat) then + zcat --version >& /dev/null + if ($status != 0) then + complete zcat n/*/f:*.Z/ + else + complete zcat c/--/"(force help license quiet version)"/ \ + c/-/"(f h L q V -)"/ n/*/f:*.{gz,Z,z,zip}/ + endif + endif +endif + + complete finger c/*@/\$hosts/ n/*/u/@ + complete ping p/1/\$hosts/ + complete traceroute p/1/\$hosts/ + + complete {talk,ntalk,phone} p/1/'`users | tr " " "\012" | uniq`'/ \ + n/*/\`who\ \|\ grep\ \$:1\ \|\ awk\ \'\{\ print\ \$2\ \}\'\`/ + + complete ftp c/-/"(d i g n v)"/ n/-/\$hosts/ p/1/\$hosts/ n/*/n/ + + # this one is simple... + #complete rcp c/*:/f/ C@[./\$~]*@f@ n/*/\$hosts/: + # From Michael Schroeder + # This one will rsh to the file to fetch the list of files! + complete rcp 'c%*@*:%`set q=$:-0;set q="$q:s/@/ /";set q="$q:s/:/ /";set q=($q " ");rsh $q[2] -l $q[1] ls -dp $q[3]\*`%' 'c%*:%`set q=$:-0;set q="$q:s/:/ /";set q=($q " ");rsh $q[1] ls -dp $q[2]\*`%' 'c%*@%$hosts%:' 'C@[./$~]*@f@' 'n/*/$hosts/:' + + complete dd c/--/"(help version)"/ c/[io]f=/f/ \ + c/conv=*,/"(ascii ebcdic ibm block unblock \ + lcase notrunc ucase swab noerror sync)"/,\ + c/conv=/"(ascii ebcdic ibm block unblock \ + lcase notrunc ucase swab noerror sync)"/,\ + c/*=/x:''/ \ + n/*/"(if of conv ibs obs bs cbs files skip file seek count)"/= + + complete nslookup p/1/x:''/ p/2/\$hosts/ + + complete ar c/[dmpqrtx]/"(c l o u v a b i)"/ p/1/"(d m p q r t x)"// \ + p/2/f:*.a/ p/*/f:*.o/ + + # these should be merged with the MH completion hacks below - jgotts + complete {refile,sprev,snext,scan,pick,rmm,inc,folder,show} \ + c@+@F:$HOME/Mail/@ + + # these and interrupt handling from Jaap Vermeulen + complete {rexec,rxexec,rxterm,rmterm} \ + 'p/1/$hosts/' 'c/-/(l L E)/' 'n/-l/u/' 'n/-L/f/' \ + 'n/-E/e/' 'n/*/c/' + complete kill 'c/-/S/' 'c/%/j/' \ + 'n/*/`ps -u $LOGNAME | awk '"'"'{print $1}'"'"'`/' + + # these from Marc Horowitz + complete attach 'n/-mountpoint/d/' 'n/-m/d/' 'n/-type/(afs nfs rvd ufs)/' \ + 'n/-t/(afs nfs rvd ufs)/' 'n/-user/u/' 'n/-U/u/' \ + 'c/-/(verbose quiet force printpath lookup debug map \ + nomap remap zephyr nozephyr readonly write \ + mountpoint noexplicit explicit type mountoptions \ + nosetuid setuid override skipfsck lock user host)/' \ + 'n/-e/f/' 'n/*/()/' + complete hesinfo 'p/1/u/' \ + 'p/2/(passwd group uid grplist pcap pobox cluster \ + filsys sloc service)/' + + # these from E. Jay Berkenbilt + # = isn't always followed by a filename or a path anymore - jgotts +if ($?traditional_complete) then + complete ./configure 'c/--*=/f/' 'c/--{cache-file,prefix,exec-prefix,\ + bindir,sbindir,libexecdir,datadir,\ + sysconfdir,sharedstatedir,localstatedir,\ + libdir,includedir,oldincludedir,infodir,\ + mandir,srcdir}/(=)//' \ + 'c/--/(cache-file verbose prefix exec-prefix bindir \ + sbindir libexecdir datadir sysconfdir \ + sharedstatedir localstatedir libdir \ + includedir oldincludedir infodir mandir \ + srcdir)//' +else + complete ./configure \ + 'c@--{prefix,exec-prefix,bindir,sbindir,libexecdir,datadir,sysconfdir,sharedstatedir,localstatedir,infodir,mandir,srcdir,x-includes,x-libraries}=*@x:'@ \ + 'c/--cachefile=*/x:/' \ + 'c/--{enable,disable,with}-*/x://' \ + 'c/--*=/x://' \ + 'c/--/(prefix= exec-prefix= bindir= \ + sbindir= libexecdir= datadir= sysconfdir= \ + sharedstatedir= localstatedir= infodir= \ + mandir= srcdir= x-includes= x-libraries= cachefile= \ + enable- disable- with- \ + help no-create quiet silent version verbose )//' +endif + complete gs 'c/-sDEVICE=/(x11 cdjmono cdj550 epson eps9high epsonc \ + dfaxhigh dfaxlow laserjet ljet4 sparc pbm \ + pbmraw pgm pgmraw ppm ppmraw bit)/' \ + 'c/-sOutputFile=/f/' 'c/-s/(DEVICE OutputFile)/=' \ + 'c/-d/(NODISPLAY NOPLATFONTS NOPAUSE)/' 'n/*/f/' + complete perl 'n/-S/c/' + complete printenv 'n/*/e/' + complete sccs p/1/"(admin cdc check clean comb deledit delget \ + delta diffs edit enter fix get help info \ + print prs prt rmdel sccsdiff tell unedit \ + unget val what)"/ + complete setenv 'p/1/e/' 'c/*:/f/' + + # these and method of setting hosts from Kimmo Suominen + if ( -f $HOME/.mh_profile && -x "`which folders`" ) then + + if ( ! $?FOLDERS ) setenv FOLDERS "`folders -fast -recurse`" + if ( ! $?MHA ) setenv MHA "`ali | sed -e '/^ /d' -e 's/:.*//'`" + + set folders = ( $FOLDERS ) + set mha = ( $MHA ) + + complete ali \ + 'c/-/(alias nolist list nonormalize normalize nouser user help)/' \ + 'n,-alias,f,' + + complete anno \ + 'c/-/(component noinplace inplace nodate date text help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete burst \ + 'c/-/(noinplace inplace noquiet quiet noverbose verbose help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete comp \ + 'c/-/(draftfolder draftmessage nodraftfolder editor noedit file form nouse use whatnowproc nowhatnowproc help)/' \ + 'c,+,$folders,' \ + 'n,-whatnowproc,c,' \ + 'n,-file,f,'\ + 'n,-form,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete dist \ + 'c/-/(noannotate annotate draftfolder draftmessage nodraftfolder editor noedit form noinplace inplace whatnowproc nowhatnowproc help)/' \ + 'c,+,$folders,' \ + 'n,-whatnowproc,c,' \ + 'n,-form,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete folder \ + 'c/-/(all nofast fast noheader header nopack pack noverbose verbose norecurse recurse nototal total noprint print nolist list push pop help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete folders \ + 'c/-/(all nofast fast noheader header nopack pack noverbose verbose norecurse recurse nototal total noprint print nolist list push pop help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete forw \ + 'c/-/(noannotate annotate draftfolder draftmessage nodraftfolder editor noedit filter form noformat format noinplace inplace digest issue volume whatnowproc nowhatnowproc help)/' \ + 'c,+,$folders,' \ + 'n,-whatnowproc,c,' \ + 'n,-filter,f,'\ + 'n,-form,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete inc \ + 'c/-/(audit file noaudit nochangecur changecur file form format nosilent silent notruncate truncate width help)/' \ + 'c,+,$folders,' \ + 'n,-audit,f,'\ + 'n,-form,f,' + + complete mark \ + 'c/-/(add delete list sequence nopublic public nozero zero help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete mhmail \ + 'c/-/(body cc from subject help)/' \ + 'n,-cc,$mha,' \ + 'n,-from,$mha,' \ + 'n/*/$mha/' + + complete mhpath \ + 'c/-/(help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete msgchk \ + 'c/-/(nodate date nonotify notify help)/' + + complete msh \ + 'c/-/(prompt noscan scan notopcur topcur help)/' + + complete next \ + 'c/-/(draft form moreproc nomoreproc length width showproc noshowproc header noheader help)/' \ + 'c,+,$folders,' \ + 'n,-moreproc,c,' \ + 'n,-showproc,c,' \ + 'n,-form,f,' + + complete packf \ + 'c/-/(file help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete pick \ + 'c/-/(and or not lbrace rbrace cc date from search subject to othercomponent after before datefield sequence nopublic public nozero zero nolist list help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete prev \ + 'c/-/(draft form moreproc nomoreproc length width showproc noshowproc header noheader help)/' \ + 'c,+,$folders,' \ + 'n,-moreproc,c,' \ + 'n,-showproc,c,' \ + 'n,-form,f,' + + complete prompter \ + 'c/-/(erase kill noprepend prepend norapid rapid nodoteof doteof help)/' + + complete refile \ + 'c/-/(draft nolink link nopreserve preserve src file help)/' \ + 'c,+,$folders,' \ + 'n,-file,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete rmf \ + 'c/-/(nointeractive interactive help)/' \ + 'c,+,$folders,' + + complete rmm \ + 'c/-/(help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete scan \ + 'c/-/(noclear clear form format noheader header width noreverse reverse file help)/' \ + 'c,+,$folders,' \ + 'n,-form,f,'\ + 'n,-file,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete send \ + 'c/-/(alias draft draftfolder draftmessage nodraftfolder filter nofilter noformat format noforward forward nomsgid msgid nopush push noverbose verbose nowatch watch width help)/' \ + 'n,-alias,f,'\ + 'n,-filter,f,' + + complete show \ + 'c/-/(draft form moreproc nomoreproc length width showproc noshowproc header noheader help)/' \ + 'c,+,$folders,' \ + 'n,-moreproc,c,' \ + 'n,-showproc,c,' \ + 'n,-form,f,'\ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete sortm \ + 'c/-/(datefield textfield notextfield limit nolimit noverbose verbose help)/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete vmh \ + 'c/-/(prompt vmhproc novmhproc help)/' \ + 'n,-vmhproc,c,' + + complete whatnow \ + 'c/-/(draftfolder draftmessage nodraftfolder editor noedit prompt help)/' + + complete whom \ + 'c/-/(alias nocheck check draft draftfolder draftmessage nodraftfolder help)/' \ + 'n,-alias,f,' + + complete plum \ + 'c/-/()/' \ + 'c,+,$folders,' \ + 'n,*,`(mark | sed "s/:.*//";echo next cur prev first last)|tr " " "\12" | sort -u`,' + + complete mail \ + 'c/-/()/' \ + 'n/*/$mha/' + + endif + + #from Dan Nicolaescu + if ( $?MODULESHOME ) then + alias Compl_module 'find ${MODULEPATH:as/:/ /} -name .version -o -name .modulea\* -prune -o -print | sed `echo "-e s@${MODULEPATH:as%:%/\*@@g -e s@%}/\*@@g"`' + complete module 'p%1%(add load unload switch display avail use unuse update purge list clear help initadd initrm initswitch initlist initclear)%' \ + 'n%{unl*,sw*,inits*}%`echo "$LOADEDMODULES:as/:/ /"`%' \ + 'n%{lo*,di*,he*,inita*,initr*}%`eval Compl_module`%' \ + 'N%{sw*,initsw*}%`eval Compl_module`%' 'C%-%(-append)%' 'n%{use,unu*,av*}%d%' 'n%-append%d%' \ + 'C%[^-]*%`eval Compl_module`%' + endif + + # from George Cox + complete acroread 'p/*/f:*.{pdf,PDF}/' + complete apachectl 'c/*/(start stop restart fullstatus status graceful \ + configtest help)/' + complete appletviewer 'p/*/f:*.class/' + complete bison 'c/--/(debug defines file-prefix= fixed-output-files \ + help name-prefix= no-lines no-parser output= \ + token-table verbose version yacc)/' \ + 'c/-/(b d h k l n o p t v y V)/' 'n/-b/f/' 'n/-o/f/' \ + 'n/-p/f/' + complete bunzip2 'p/*/f:*.bz2/' + complete bzip2 'n/-9/f:^*.bz2/' 'n/-d/f:*.bz2/' + complete c++ 'p/*/f:*.{c++,cxx,c,cc,C,cpp}/' + complete co 'p@1@`\ls -1a RCS | sed -e "s/\(.*\),v/\1/"`@' + complete crontab 'n/-u/u/' + complete camcontrol 'p/1/(cmd debug defects devlist eject inquiry \ + modepage negotiate periphlist rescan reset start \ + stop tags tur)/' + complete ctlinnd 'p/1/(addhist allow begin cancel changegroup \ + checkfile drop feedinfo flush flushlogs go hangup \ + logmode mode name newgroup param pause readers refile \ + reject reload renumber reserve rmgroup send shutdown \ + kill throttle trace xabort xexec)/' + complete cvs 'c/--/(help help-commands help-synonyms)/' \ + 'p/1/(add admin annotate checkout commit diff \ + edit editors export history import init log login \ + logout rdiff release remove rtag status tag unedit \ + update watch watchers)/' 'n/-a/(edit unedit commit \ + all none)/' 'n/watch/(on off add remove)/' + complete cxx 'p/*/f:*.{c++,cxx,c,cc,C,cpp}/' + complete detex 'p/*/f:*.tex/' + complete edquota 'n/*/u/' + complete exec 'p/1/c/' + complete ghostview 'p/*/f:*.ps/' + complete gv 'p/*/f:*.ps/' + complete ifconfig 'p@1@`ifconfig -l`@' 'n/*/(range phase link netmask \ + mtu vlandev vlan metric mediaopt down delete \ + broadcast arp debug)/' + complete imake 'c/-I/d/' + complete ipfw 'p/1/(flush add delete list show zero)/' \ + 'n/add/(allow permit accept pass deny drop reject \ + reset count skipto num divert port tee port)/' + complete javac 'p/*/f:*.java/' + complete ldif2ldbm 'n/-i/f:*.ldif/' + complete libtool 'c/--mode=/(compile execute finish install link \ + uninstall)/' 'c/--/(config debug dry-run features \ + finish help quiet silent version mode=)/' + complete libtoolize 'c/--/(automake copy debug dry-run force help ltdl \ + ltdl-tar version)/' + complete links 'c/-/(assume-codepage async-dns download-dir \ + format-cache-size ftp-proxy help http-proxy \ + max-connections max-connections-to-host \ + memory-cache-size receive-timeout retries \ + unrestartable-receive-timeout version)/' + complete natd c/-/'(alias_address config deny_incoming dynamic \ + inport interface log log_denied log_facility \ + outport outport port pptpalias proxy_only \ + proxy_rule redirect_address redirect_port \ + reverse same_ports unregistered_only use_sockets \ + verbose)'/ 'n@-interface@`ifconfig -l`@' + complete netstat 'n@-I@`ifconfig -l`@' + complete objdump 'c/--/(adjust-vma= all-headers architecture= \ + archive-headers debugging demangle disassemble \ + disassemble-all disassemble-zeroes dynamic-reloc \ + dynamic-syms endian= file-headers full-contents \ + headers help info line-numbers no-show-raw-insn \ + prefix-addresses private-headers reloc section-headers \ + section=source stabs start-address= stop-address= \ + syms target= version wide)/' \ + 'c/-/(a h i f C d D p r R t T x s S l w)/' + complete xmodmap 'c/-/(display help grammar verbose quiet n e pm pk \ + pke pp)/' + complete lynx 'c/-/(accept_all_cookies anonymous assume_charset= \ + assume_local_charset= assume_unrec_charset= auth= base \ + book buried_news cache= case cfg= child cookie_file= \ + cookies core crawl debug_partial display= dump editor= \ + emacskeys enable_scrollback error_file= force_html \ + force_secure forms_options from ftp get_data head help \ + hiddenlinks= historical homepage= image_links index= \ + ismap link= localhost mime_header minimal \ + newschunksize= newsmaxchunk= nobrowse nocc nocolor \ + nofilereferer nolist nolog nopause noprint noredir \ + noreferer nostatus number_links partial partial_thres \ + pauth= popup post_data preparsed print pseudo_inlines \ + raw realm reload restrictions= resubmit_posts rlogin \ + selective show_cursor soft_dquotes source stack_dump \ + startfile_ok tagsoup telnet term= tlog trace traversal \ + underscore useragent= validate verbose version vikeys \ + width=)/' 'c/(http|ftp)/$URLS/' + complete gmake 'c/{--directory=,--include-dir=}/d/' \ + 'c/{--assume-new,--assume-old,--makefile,--new-file,--what-if,--file}/f/' \ + 'c/--/(assume-new= assume-old= debug directory= \ + dry-run environment-overrides file= help \ + ignore-errors include-dir= jobs[=N] just-print \ + keep-going load-average[=N] makefile= max-load[=N] \ + new-file= no-builtin-rules no-keep-going \ + no-print-directory old-file= print-data-base \ + print-directory question quiet recon silent stop \ + touch version warn-undefined-variables what-if=)/' \ + 'n@*@`cat -s GNUMakefile Makefile makefile |& sed -n -e "/No such file/d" -e "s/^\([A-Za-z0-9-]*\):.*/\1/p"`@' \ + 'n/=/f/' 'n/-f/f/' + complete mixer p/1/'(vol bass treble synth pcm speaker mic cd mix \ + pcm2 rec igain ogain line1 line2 line3)'/ \ + p@2@'`mixer $:-1 | awk \{\ print\ \$7\ \}`'@ + + complete mpg123 'c/--/(2to1 4to1 8bit aggressive au audiodevice \ + auth buffer cdr check doublespeed equalizer frames \ + gain halfspeed headphones left lineout list mix mono \ + proxy quiet random rate reopen resync right scale \ + shuffle single0 single1 skip speaker stdout stereo \ + test verbose wav)/' + complete mysqladmin 'n/*/(create drop extended-status flush-hosts \ + flush-logs flush-status flush-tables flush-privileges \ + kill password ping processlist reload refresh \ + shutdown status variables version)/' + complete mutt c@-f=@F:${HOME}/Mail/@ \ + n/-a/f/ \ + n/-F/f/ n/-H/f/ \ + n/-s/x:''/ \ + n/-e/x:''/ \ + n@-b@'`cat ${HOME}/.muttrc-alias | awk '"'"'{print $2 }'"'"\`@ \ + n@-c@'`cat ${HOME}/.muttrc-alias | awk '"'"'{print $2 }'"'"\`@ \ + n@*@'`cat ${HOME}/.muttrc-alias | awk '"'"'{print $2 }'"'"\`@ + complete ndc 'n/*/(status dumpdb reload stats trace notrace \ + querylog start stop restart )/' + if ($?traditional_complete) then + complete nm 'c/--/(debug-syms defined-only demangle dynamic \ + extern-only format= help line-numbers no-demangle \ + no-sort numeric-sort portability print-armap \ + print-file-name reverse-sort size-sort undefined-only \ + version)/' 'p/*/f:^*.{h,C,c,cc}/' + else + complete nm 'c/--radix=/x:/' \ + 'c/--target=/x:/' \ + 'c/--format=/(bsd sysv posix)/n/' \ + 'c/--/(debugsyms extern-only demangle dynamic print-armap \ + print-file-name numeric-sort no-sort reverse-sort \ + size-sort undefined-only portability target= radix= \ + format= defined-only\ line-numbers no-demangle version \ + help)//' \ + 'n/*/f:^*.{h,c,cc,s,S}/' + endif + complete nmap 'n@-e@`ifconfig -l`@' 'p/*/$hostnames/' + complete perldoc 'n@*@`\ls -1 /usr/libdata/perl/5.*/pod | sed s%\\.pod.\*\$%%`@' + complete postfix 'n/*/(start stop reload abort flush check)/' + complete postmap 'n/1/(hash: regexp:)' 'c/hash:/f/' 'c/regexp:/f/' + complete rcsdiff 'p@1@`\ls -1a RCS | sed -e "s/\(.*\),v/\1/"`@' + complete X 'c/-/(I a ac allowMouseOpenFail allowNonLocalModInDev \ + allowNonLocalXvidtune ar1 ar2 audit auth bestRefresh \ + bgamma bpp broadcast bs c cc class co core deferglyphs \ + disableModInDev disableVidMode displayID dpi dpms f fc \ + flipPixels fn fp gamma ggamma help indirect kb keeptty \ + ld lf logo ls nolisten string noloadxkb nolock nopn \ + once p pn port probeonly query quiet r rgamma s \ + showconfig sp su t terminate to tst v verbose version \ + weight wm x xkbdb xkbmap)/' + complete users 'c/--/(help version)/' 'p/1/x:""/' + complete vidcontrol 'p/1/(132x25 132x30 132x43 132x50 132x60 40x25 80x25 \ + 80x30 80x43 80x50 80x60 EGA_80x25 EGA_80x43 \ + VESA_132x25 VESA_132x30 VESA_132x43 VESA_132x50 \ + VESA_132x60 VESA_800x600 VGA_320x200 VGA_40x25 \ + VGA_80x25 VGA_80x30 VGA_80x50 VGA_80x60)/' + complete vim 'n/*/f:^*.[oa]/' + complete where 'n/*/c/' + complete which 'n/*/c/' + complete wmsetbg 'c/-/(display D S a b c d e m p s t u w)/' \ + 'c/--/(back-color center colors dither help match \ + maxscale parse scale smooth tile update-domain \ + update-wmaker version workspace)/' + complete xdb 'p/1/c/' + complete xdvi 'c/-/(allowshell debug display expert gamma hushchars \ + hushchecksums hushspecials install interpreter keep \ + margins nogrey noinstall nomakepk noscan paper safer \ + shrinkbuttonn thorough topmargin underlink version)/' \ + 'n/-paper/(a4 a4r a5 a5r)/' 'p/*/f:*.dvi/' + complete xlock 'c/-/(allowaccess allowroot debug description \ + echokeys enablesaver grabmouse grabserver hide inroot \ + install inwindow mono mousemotion nolock remote \ + resetsaver sound timeelapsed use3d usefirst verbose \ + wireframe background batchcount bg bitmap both3d \ + count cycles delay delta3d display dpmsoff \ + dpmsstandby dpmssuspend endCmd erasedelay erasemode \ + erasetime fg font foreground geometry help \ + icongeometry info invalid left3d lockdelay logoutCmd \ + mailCmd mailIcon message messagefile messagefont \ + messagesfile mode name ncolors nice nomailIcon none3d \ + parent password planfont program resources right3d \ + saturation size startCmd timeout username validate \ + version visual)/' 'n/-mode/(ant atlantis ball bat \ + blot bouboule bounce braid bubble bubble3d bug cage \ + cartoon clock coral crystal daisy dclock decay deco \ + demon dilemma discrete drift eyes fadeplot flag flame \ + flow forest galaxy gears goop grav helix hop hyper \ + ico ifs image invert julia kaleid kumppa lament laser \ + life life1d life3d lightning lisa lissie loop lyapunov \ + mandelbrot marquee matrix maze moebius morph3d \ + mountain munch nose pacman penrose petal pipes puzzle \ + pyro qix roll rotor rubik shape sierpinski slip sphere \ + spiral spline sproingies stairs star starfish strange \ + superquadrics swarm swirl tetris thornbird triangle \ + tube turtle vines voters wator wire world worm xjack \ + blank bomb random)/' + complete xfig 'c/-/(display)/' 'p/*/f:*.fig/' + complete wget c/--/"(accept= append-output= background cache= \ + continue convert-links cut-dirs= debug \ + delete-after directory-prefix= domains= \ + dont-remove-listing dot-style= exclude-directories= \ + exclude-domains= execute= follow-ftp \ + force-directories force-html glob= header= help \ + http-passwd= http-user= ignore-length \ + include-directories= input-file= level= mirror \ + no-clobber no-directories no-host-directories \ + no-host-lookup no-parent non-verbose \ + output-document= output-file= passive-ftp \ + proxy-passwd= proxy-user= proxy= quiet quota= \ + recursive reject= relative retr-symlinks save-headers \ + server-response span-hosts spider timeout= \ + timestamping tries= user-agent= verbose version wait=)"/ + + # these from Tom Warzeka + + # this one works but is slow and doesn't descend into subdirectories + # complete cd C@[./\$~]*@d@ \ + # p@1@'`\ls -1F . $cdpath | grep /\$ | sort -u`'@ n@*@n@ + + if ( -r /etc/shells ) then + complete setenv p@1@e@ n@DISPLAY@\$hosts@: n@SHELL@'`cat /etc/shells`'@ + else + complete setenv p@1@e@ n@DISPLAY@\$hosts@: + endif + complete unsetenv n/*/e/ + + set _maildir = /var/mail + if (-r $HOME/.mailrc) then + complete mail c/-/"(e i f n s u v)"/ c/*@/\$hosts/ \ + c@+@F:$HOME/Mail@ C@[./\$~]@f@ n/-s/x:''/ \ + n@-u@T:$_maildir@ n/-f/f/ \ + n@*@'`sed -n s/alias//p $HOME/.mailrc | tr -s " " " " | cut -f 2`'@ + else + complete mail c/-/"(e i f n s u v)"/ c/*@/\$hosts/ \ + c@+@F:$HOME/Mail@ C@[./\$~]@f@ n/-s/x:''/ \ + n@-u@T:$_maildir@ n/-f/f/ n/*/u/ + endif + unset _maildir + + if (! $?MANPATH) then + if (-r /usr/share/man) then + setenv MANPATH /usr/share/man: + else + setenv MANPATH /usr/man: + endif + endif + + if ($?traditional_complete) then + # use of $MANPATH from Dan Nicolaescu + # use of 'find' adapted from Lubomir Host + complete man \ + 'n@1@`set q = "$MANPATH:as%:%/man1 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.1.\*\$%%`@'\ + 'n@2@`set q = "$MANPATH:as%:%/man2 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.2.\*\$%%`@'\ + 'n@3@`set q = "$MANPATH:as%:%/man3 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.3.\*\$%%`@'\ + 'n@4@`set q = "$MANPATH:as%:%/man4 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.4.\*\$%%`@'\ + 'n@5@`set q = "$MANPATH:as%:%/man5 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.5.\*\$%%`@'\ + 'n@6@`set q = "$MANPATH:as%:%/man6 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.6.\*\$%%`@'\ + 'n@7@`set q = "$MANPATH:as%:%/man7 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.7.\*\$%%`@'\ + 'n@8@`set q = "$MANPATH:as%:%/man8 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.8.\*\$%%`@'\ + 'n@9@`set q = "$MANPATH:as%:%/man9 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.9.\*\$%%`@'\ + 'n@0@`set q = "$MANPATH:as%:%/man0 %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.0.\*\$%%`@'\ + 'n@n@`set q = "$MANPATH:as%:%/mann %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.n.\*\$%%`@'\ + 'n@o@`set q = "$MANPATH:as%:%/mano %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.o.\*\$%%`@'\ + 'n@l@`set q = "$MANPATH:as%:%/manl %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.l.\*\$%%`@'\ + 'n@p@`set q = "$MANPATH:as%:%/manp %" ; \ls -1 $q |& sed -e s%^.\*:.\*\$%% -e s%\\.p.\*\$%%`@'\ + c@-@"(- f k M P s S t)"@ n@-f@c@ n@-k@x:''@ n@-[MP]@d@ \ + 'N@-[MP]@`\ls -1 $:-1/man? |& sed -n s%\\..\\+\$%%p`@' \ + 'n@-[sS]@`\ls -1 $MANPATH:as%:% % |& sed -n s%^man%%p | sort -u`@'\ + 'n@*@`find $MANPATH:as%:% % \( -type f -o -type l \) -printf "%f " |& sed -e "s%find: .*: No such file or directory%%" -e "s%\([^\.]\+\)\.\([^ ]*\) %\1 %g"`@' + #n@*@c@ # old way -- commands only + else + complete man n@1@'`\ls -1 /usr/man/man1 | sed s%\\.1.\*\$%%`'@ \ + n@2@'`\ls -1 /usr/man/man2 | sed s%\\.2.\*\$%%`'@ \ + n@3@'`\ls -1 /usr/man/man3 | sed s%\\.3.\*\$%%`'@ \ + n@4@'`\ls -1 /usr/man/man4 | sed s%\\.4.\*\$%%`'@ \ + n@5@'`\ls -1 /usr/man/man5 | sed s%\\.5.\*\$%%`'@ \ + n@6@'`\ls -1 /usr/man/man6 | sed s%\\.6.\*\$%%`'@ \ + n@7@'`\ls -1 /usr/man/man7 | sed s%\\.7.\*\$%%`'@ \ + n@8@'`\ls -1 /usr/man/man8 | sed s%\\.8.\*\$%%`'@ \ + n@9@'`[ -r /usr/man/man9 ] && \ls -1 /usr/man/man9 | sed s%\\.9.\*\$%%`'@ \ + n@0@'`[ -r /usr/man/man0 ] && \ls -1 /usr/man/man0 | sed s%\\.0.\*\$%%`'@ \ + n@new@'`[ -r /usr/man/mann ] && \ls -1 /usr/man/mann | sed s%\\.n.\*\$%%`'@ \ + n@old@'`[ -r /usr/man/mano ] && \ls -1 /usr/man/mano | sed s%\\.o.\*\$%%`'@ \ +n@local@'`[ -r /usr/man/manl ] && \ls -1 /usr/man/manl | sed s%\\.l.\*\$%%`'@ \ +n@public@'`[ -r /usr/man/manp ]&& \ls -1 /usr/man/manp | sed s%\\.p.\*\$%%`'@ \ + c/-/"(- f k P s t)"/ n/-f/c/ n/-k/x:''/ n/-P/d/ \ + N@-P@'`\ls -1 $:-1/man? | sed s%\\..\*\$%%`'@ n/*/c/ + endif + + complete ps c/-t/x:''/ c/-/"(a c C e g k l S t u v w x)"/ \ + n/-k/x:''/ N/-k/x:''/ n/*/x:''/ + complete compress c/-/"(c f v b)"/ n/-b/x:''/ n/*/f:^*.Z/ + complete uncompress c/-/"(c f v)"/ n/*/f:*.Z/ + + complete uuencode p/1/f/ p/2/x:''/ n/*/n/ + complete uudecode c/-/"(f)"/ n/-f/f:*.{uu,UU}/ p/1/f:*.{uu,UU}/ n/*/n/ + + complete xhost c/[+-]/\$hosts/ n/*/\$hosts/ + complete xpdf c/-/"(z g remote raise quit cmap rgb papercolor \ + eucjp t1lib freetype ps paperw paperh level1 \ + upw fullscreen cmd q v h help)"/ \ + n/-z/x:''/ \ + n/-g/x:''/ n/-remote/x:''/ \ + n/-rgb/x:''/ n/-papercolor/x:''/ \ + n/-{t1lib,freetype}/x:''/ \ + n/-ps/x:''/ n/-paperw/x:''/ \ + n/-paperh/x:''/ n/-upw/x:''/ \ + n/-/f:*.{pdf,PDF}/ \ + N/-{z,g,remote,rgb,papercolor,t1lib,freetype,ps,paperw,paperh,upw}/f:*.{pdf,PDF}/ \ + N/-/x:''/ p/1/f:*.{pdf,PDF}/ p/2/x:''/ + + complete tcsh c/-D*=/'x:'/ c/-D/'x:'/ \ + c/-/"(b c d D e f F i l m n q s t v V x X -version)"/ \ + n/-c/c/ n/{-l,--version}/n/ n/*/'f:*.{,t}csh'/ + + complete rpm c/--/"(query verify nodeps nofiles nomd5 noscripts \ + nogpg nopgp install upgrade freshen erase allmatches \ + notriggers repackage test rebuild recompile initdb \ + rebuilddb addsign resign querytags showrc setperms \ + setugids all file group package querybynumber qf \ + triggeredby whatprovides whatrequires changelog \ + configfiles docfiles dump filesbypkg info last list \ + provides queryformat requires scripts state triggers \ + triggerscripts allfiles badreloc excludepath checksig \ + excludedocs force hash ignoresize ignorearch ignoreos \ + includedocs justdb noorder oldpackage percent prefix \ + relocate replace-files replacepkgs buildroot clean \ + nobuild rmsource rmspec short-circuit sign target \ + help version quiet rcfile pipe dbpath root specfile)"/\ + c/-/"(q V K i U F e ba bb bp bc bi bl bs ta tb tp tc \ + ti tl ts a f g p c d l R s h ? v vv -)"/ \ + n/{-f,--file}/f/ n/{-g,--group}/g/ n/--pipe/c/ n/--dbpath/d/ \ + n/--querybynumber/x:''/ n/--triggeredby/x:''/\ + n/--what{provides,requires}/x:''/ n/--root/d/ \ + n/--{qf,queryformat}/x:''/ n/--buildroot/d/ \ + n/--excludepath/x:''/ n/--prefix/x:''/ \ + n/--relocate/x:''/ n/--target/x:''/\ + n/--rcfile/x:''/ n/--specfile/x:''/ \ + n/{-[iUFep],--{install,upgrade,freshen,erase,package}}/f:*.rpm/ + + # these conform to the latest GNU versions available at press time ... + # updates by John Gotts + if (-X emacs) then + # TW note: if your version of GNU Emacs supports the "--version" option, + # uncomment this line and comment the next to automatically + # detect the version, else set "_emacs_ver" to your version. + #set _emacs_ver=`emacs --version | sed -e 's%GNU Emacs %%' -e q | cut -d . -f1-2` + set _emacs_ver=21.3 + set _emacs_dir=`which emacs | sed s%/bin/emacs%%` + complete emacs c/--/"(batch terminal display no-windows no-init-file \ + user debug-init unibyte multibyte version help \ + no-site-file funcall load eval insert kill)"/ \ + c/-/"(t d nw q u f l -)"/ c/+/x:''/ \ + n/{-t,--terminal}/x:''/ n/{-d,--display}/x:''/ \ + n/{-u,--user}/u/ n/{-f,--funcall}/x:''/ \ + n@{-l,--load}@F:$_emacs_dir/share/emacs/$_emacs_ver/lisp@ \ + n/--eval/x:''/ n/--insert/f/ n/*/f:^*[\#~]/ + unset _emacs_ver _emacs_dir + endif + + complete gzcat c/--/"(force help license quiet version)"/ \ + c/-/"(f h L q V -)"/ n/*/f:*.{gz,Z,z,zip}/ + complete gzip c/--/"(stdout to-stdout decompress uncompress \ + force help list license no-name quiet recurse \ + suffix test verbose version fast best)"/ \ + c/-/"(c d f h l L n q r S t v V 1 2 3 4 5 6 7 8 9 -)"/\ + n/{-S,--suffix}/x:''/ \ + n/{-d,--{de,un}compress}/f:*.{gz,Z,z,zip,taz,tgz}/ \ + N/{-d,--{de,un}compress}/f:*.{gz,Z,z,zip,taz,tgz}/ \ + n/*/f:^*.{gz,Z,z,zip,taz,tgz}/ + complete {gunzip,ungzip} c/--/"(stdout to-stdout force help list license \ + no-name quiet recurse suffix test verbose version)"/ \ + c/-/"(c f h l L n q r S t v V -)"/ \ + n/{-S,--suffix}/x:''/ \ + n/*/f:*.{gz,Z,z,zip,taz,tgz}/ + complete zgrep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/-/"(A b B c C e f h i l n s v V w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + complete zegrep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/-/"(A b B c C e f h i l n s v V w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + complete zfgrep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/-/"(A b B c C e f h i l n s v V w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + complete znew c/-/"(f t v 9 P K)"/ n/*/f:*.Z/ + complete zmore n/*/f:*.{gz,Z,z,zip}/ + complete zfile n/*/f:*.{gz,Z,z,zip,taz,tgz}/ + complete ztouch n/*/f:*.{gz,Z,z,zip,taz,tgz}/ + complete zforce n/*/f:^*.{gz,tgz}/ + + complete dcop 'p/1/`$:0`/ /' \ + 'p/2/`$:0 $:1 | awk \{print\ \$1\}`/ /' \ + 'p/3/`$:0 $:1 $:2 | sed "s%.* \(.*\)(.*%\1%"`/ /' + + + complete grep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/--/"(extended-regexp fixed-regexp basic-regexp \ + regexp file ignore-case word-regexp line-regexp \ + no-messages revert-match version help byte-offset \ + line-number with-filename no-filename quiet silent \ + text directories recursive files-without-match \ + files-with-matches count before-context after-context \ + context binary unix-byte-offsets)"/ \ + c/-/"(A a B b C c d E e F f G H h i L l n q r s U u V \ + v w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + complete egrep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/--/"(extended-regexp fixed-regexp basic-regexp \ + regexp file ignore-case word-regexp line-regexp \ + no-messages revert-match version help byte-offset \ + line-number with-filename no-filename quiet silent \ + text directories recursive files-without-match \ + files-with-matches count before-context after-context \ + context binary unix-byte-offsets)"/ \ + c/-/"(A a B b C c d E e F f G H h i L l n q r s U u V \ + v w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + complete fgrep c/-*A/x:'<#_lines_after>'/ c/-*B/x:'<#_lines_before>'/\ + c/--/"(extended-regexp fixed-regexp basic-regexp \ + regexp file ignore-case word-regexp line-regexp \ + no-messages revert-match version help byte-offset \ + line-number with-filename no-filename quiet silent \ + text directories recursive files-without-match \ + files-with-matches count before-context after-context \ + context binary unix-byte-offsets)"/ \ + c/-/"(A a B b C c d E e F f G H h i L l n q r s U u V \ + v w x)"/ \ + p/1/x:''/ N/-*e/f/ \ + n/-*e/x:''/ n/-*f/f/ n/*/f/ + + complete sed c/--/"(quiet silent version help expression file)"/ \ + c/-/"(n V e f -)"/ n/{-e,--expression}/x:'