Index: head/Mk/Uses/php.mk
===================================================================
--- head/Mk/Uses/php.mk	(revision 559719)
+++ head/Mk/Uses/php.mk	(revision 559720)
@@ -1,483 +1,479 @@
 # $FreeBSD$
 #
 # Support for PHP-based ports.
 #
 # Feature:	php
 # Usage:	USES=php
 # Valid ARGS:	(none), phpize, ext, zend, build, cli, cgi, mod, web, embed,
 #		pecl, flavors, noflavors
 #
 #	- phpize   : Use to build a PHP extension.
 #	- ext      : Use to build, install and register a PHP extension.
 #	- zend     : Use to build, install and register a Zend extension.
 #	- build    : Set PHP also as a build dependency.
 #	- cli      : Want the CLI version of PHP.
 #	- cgi      : Want the CGI version of PHP.
 #	- mod      : Want the Apache Module for PHP.
 #	- web      : Want the Apache Module or the CGI version of PHP.
 #	- embed    : Want the embedded library version of PHP.
 #	- pecl     : Fetches from PECL.
 #	- flavors  : Generates flavors for supported versions.
 #		     (implied by phpize,ext,zend,pecl)
 #	- noflavors: Prevents generation of flavor.
 #
 # If the port requires a predefined set of PHP extensions, they can be
 # listed in this way:
 #
 # USE_PHP=	ext1 ext2 ext3
 #
 # PHP and Zend extensions built with :ext and :zend are automatically enabled
 # when the port is installed.  Each port creates a PHP_EXT_INI_FILE file and
 # registers the extension in it.
 #
 # The PHP_EXT_INI_FILE file has a priority number embeded into its name so that
 # extensions are loaded in the right order.  The priority is defined by
 # PHP_MOD_PRIO and is a number between 00 and 99.
 #
 # For extensions that do not depend on any extension, the priority is
 # automatically set to 20, for extensions that depend on another extension, the
 # priority is automatically set to 30.  Some extensions may need to be loaded
 # before everyone else (for example opcache), or after an extension with a
 # priotity of 30, in that case, add PHP_MOD_PRIO=XX in the port's Makefile.
 # For example:
 #
 # USES=		php:ext
 # USE_PHP=	xml wddx
 # PHP_MOD_PRIO=	40
 #
 # The port can set these options in its Makefile before bsd.port.pre.mk:
 #
 # IGNORE_WITH_PHP=N - The port doesn't work with PHP version N.
 #
 # You may combine multiple php:* arguments.
 # Don't specify any php:* argument if your port will work with every PHP SAPI.
 #
 # If you are building PHP-based ports in poudriere(8) with ZTS enabled,
 # add WITH_MPM=event to /etc/make.conf to prevent build failures.
 
 .if !defined(_INCLUDE_USES_PHP_MK)
 
 PHP_Include_MAINTAINER=	ale@FreeBSD.org
 
 _INCLUDE_USES_PHP_MK=	yes
 
 _PHP_VALID_ARGS=	build cgi cli embed ext flavors mod noflavors pecl \
 			phpize web zend
 _PHP_UNKNOWN_ARGS=
 .for arg in ${php_ARGS}
 .  if empty(_PHP_VALID_ARGS:M${arg})
 _PHP_UNKNOWN_ARGS+=	${arg}
 .  endif
 .endfor
 .if !empty(_PHP_UNKNOWN_ARGS)
 IGNORE=	has unknown USES=php arguments: ${_PHP_UNKNOWN_ARGS}
 .endif
 
 .  if ${php_ARGS:Mbuild} && ( ${php_ARGS:Mphpize} || ${php_ARGS:Mext} || ${php_ARGS:Mzend} )
 DEV_WARNING+=	"USES=php:build is included in USES=php:phpize, USES=php:ext, and USES=php:zend, so it is not needed"
 .  endif
 .  if ${php_ARGS:Mflavors} && ( ${php_ARGS:Mphpize} || ${php_ARGS:Mext} || ${php_ARGS:Mzend} || ${php_ARGS:Mpecl} )
 DEV_WARNING+=	"USES=php:flavors is included in phpize, ext, zend and pecl, so it is not needed."
 .  endif
 .  if ${php_ARGS:Mphpize} && ( ${php_ARGS:Mext} || ${php_ARGS:Mzend} )
 DEV_WARNING+=	"USES=php:phpize is included in USES=php:ext and USES=php:zend, so it is not needed"
 .  endif
 .  if ${php_ARGS:Mext} && ${php_ARGS:Mzend}
 DEV_WARNING+=	"USES=php:ext is included in USES=php:zend, so it is not needed"
 .  endif
 .  if ${php_ARGS:Mext} && ${php_ARGS:Mpecl}
 DEV_WARNING+=	"USES=php:ext is included in USES=php:pecl, so it is not needed"
 .  endif
 
 .  if ( ${php_ARGS:Mphpize} || ${php_ARGS:Mext} || ${php_ARGS:Mzend} || ${php_ARGS:Mpecl} ) && !${php_ARGS:Mnoflavors}
 php_ARGS+=	flavors
 .  endif
 
 .  if ${php_ARGS:Mnoflavors} && ${php_ARGS:Mflavors}
 php_ARGS:=	${php_ARGS:Nflavors}
 .  endif
 
 .  if ${php_ARGS:Mpecl}
 php_ARGS+=	ext
 .    if !defined(USE_GITHUB)
 EXTRACT_SUFX=	.tgz
 MASTER_SITES=	https://pecl.php.net/get/ \
 		http://pecl.php.net/get/
 .    endif
 PKGNAMEPREFIX=	${PECL_PKGNAMEPREFIX}
 DIST_SUBDIR=	PECL
 .  endif
 
 PHPBASE?=	${LOCALBASE}
 
-_ALL_PHP_VERSIONS=	72 73 74 80
+_ALL_PHP_VERSIONS=	73 74 80
 
 # Make the already installed PHP the default one.
 .  if exists(${PHPBASE}/etc/php.conf)
 .include "${PHPBASE}/etc/php.conf"
 .    if !defined(PHP_EXT_DIR)
 PHP_EXT_DIR!=	${PHPBASE}/bin/php-config --extension-dir | ${SED} -ne 's,^${PHPBASE}/lib/php/\(.*\),\1,p'
 .    endif
 _INSTALLED_PHP_VER:=	${PHP_VER}
 # If we have an installed version of PHP, and this does not support it, set
 # IGNORE to fail early as you cannot install two different versions of PHP at
 # the same time anyway.
 .    if defined(IGNORE_WITH_PHP) && ${IGNORE_WITH_PHP:M${_INSTALLED_PHP_VER}}
 IGNORE=	does not work with PHP versions "${IGNORE_WITH_PHP}" and "${_INSTALLED_PHP_VER}" is installed.
 .    endif
 
 .  else
 PHP_VER?=	${PHP_DEFAULT:S/.//}
 .  endif # .if exists(${PHPBASE}/etc/php.conf)
 
 # Use the "default" php version as the first version for flavors, so that it
 # gets to be the default flavor.
 _ALL_FLAVOR_VERSIONS=	${PHP_VER} ${_ALL_PHP_VERSIONS:N${PHP_VER}}
 
 # If we want flavors, fill in FLAVORS with the allowed PHP versions, if some
 # cannot be used, or all of them if they all can.
 # Then if there is no flavor set, use the first one as the default.
 .  if ${php_ARGS:Mflavors}
 .    if empty(FLAVORS)
 .      if defined(IGNORE_WITH_PHP)
 .        for _v in ${_ALL_FLAVOR_VERSIONS}
 .          if empty(IGNORE_WITH_PHP:M${_v})
 # Avoid a leading space in FLAVORS.
 .            if empty(FLAVORS)
 FLAVORS:=	php${_v}
 .            else
 FLAVORS:=	${FLAVORS} php${_v}
 .            endif
 .          endif
 .        endfor
 .      else # defined(IGNORE_WITH_PHP)
 FLAVORS:=	${_ALL_FLAVOR_VERSIONS:S/^/php/}
 .      endif # defined(IGNORE_WITH_PHP)
 .    endif
 .    if empty(FLAVOR)
 FLAVOR=	${FLAVORS:[1]}
 .    endif
 .  endif
 
 .if ${PHP_VER} == 74 && (${ARCH:Mmips*} || (${ARCH:Mpowerpc*} && !exists(/usr/bin/clang)) || ${ARCH} == sparc64)
 USE_GCC=	yes
 .endif
 
 # This variable is for dependencies lines, so you write:
 # ${PHP_PKGNAMEPREFIX}foo:devel/php-foo@${PHP_FLAVOR}
 PHP_FLAVOR=	php${PHP_VER}
 
 # So, we have PHP flavors, set PHP_VER accordingly.
 .  if ${FLAVOR:Mphp[0-9][0-9]}
 PHP_VER=	${FLAVOR:S/^php//}
 .  endif
 
 # If lang/php is not installed, or if we have a php flavor but want a non
 # default one, we need to overwrite those.
 .  if empty(PHP_EXT_DIR) || empty(PHP_EXT_INC) || \
 	(${FLAVOR:Mphp[0-9][0-9]} && ${FLAVOR} != ${FLAVORS:[1]})
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
 .    if ${PHP_VER} == 80
 PHP_EXT_DIR=   20200930
 PHP_EXT_INC=    hash json pcre spl
 .    elif ${PHP_VER} == 74
 PHP_EXT_DIR=   20190902
 PHP_EXT_INC=    hash pcre spl
 .    elif ${PHP_VER} == 73
 PHP_EXT_DIR=   20180731
 PHP_EXT_INC=    pcre spl
-.    elif ${PHP_VER} == 72
-PHP_EXT_DIR=   20170718
-PHP_EXT_INC=    pcre spl
 .    else
 # (rene) default to DEFAULT_VERSIONS
-PHP_EXT_DIR=	20170718
-PHP_EXT_INC=	pcre spl
+PHP_EXT_DIR=	20190902
+PHP_EXT_INC=	hash pcre spl
 .    endif
 
 # Try to figure out what the PHP_EXT_DIR should be WRT the
 # installed Apache port.
 HTTPD?=		${LOCALBASE}/sbin/httpd
 .    if exists(${HTTPD})
 APACHE_THR!=	${HTTPD} -V | ${AWK} '/threaded/ {print $2}'
 .      if ${APACHE_THR:Myes}
 PHP_EXT_DIR:=	${PHP_EXT_DIR}-zts
 .      endif
 .    elif defined(APACHE_PORT) && (${APACHE_PORT:M*worker*} != "" || ${APACHE_PORT:M*event*} != "")
 PHP_EXT_DIR:=	${PHP_EXT_DIR}-zts
 .    elif defined(WITH_MPM) && (${WITH_MPM} == "worker" || ${WITH_MPM} == "event")
 PHP_EXT_DIR:=	${PHP_EXT_DIR}-zts
 .    endif
 
 .    if defined(WITH_DEBUG)
 PHP_EXT_DIR:=	${PHP_EXT_DIR}-debug
 .    endif
 PHP_SAPI?=	""
 .  endif # empty(PHP_EXT_DIR) || empty(PHP_EXT_INC) || (${FLAVOR:Mphp[0-9][0-9]} && ${FLAVOR} != ${FLAVORS:[1]})
 
 # Set a few PKGNAME(PRE|SUF)FIX to be used in ports.
 PHP_PKGNAMEPREFIX=	php${PHP_VER}-
 PHP_PKGNAMESUFFIX=	-php${PHP_VER}
 PECL_PKGNAMEPREFIX=	php${PHP_VER}-pecl-
 
 .  if defined(IGNORE_WITH_PHP)
 .    for VER in ${IGNORE_WITH_PHP}
 .      if ${PHP_VER} == "${VER}"
 _IGNORE_PHP_SET=
 IGNORE=		cannot be installed: doesn't work with lang/php${PHP_VER} port\
 		(doesn't support PHP ${IGNORE_WITH_PHP:C/^(7)/\1./})
 .      endif
 .    endfor
 .  endif
 
 .  if ${php_ARGS:Mweb}
 .    if ${php_ARGS:Mcgi} || ${php_ARGS:Mmod}
 check-makevars::
 		@${ECHO_CMD} "If you use :web you cannot also use :cgi"
 		@${ECHO_CMD} "or :mod. Use only one of them."
 		@${FALSE}
 .    endif
 .  endif
 
 .  if ${php_ARGS:Mcgi}
 .    if defined(PHP_VERSION) && ${PHP_SAPI:Mcgi} == "" && ${PHP_SAPI:Mfpm} == ""
 check-makevars::
 		@${ECHO_CMD} "This port requires the CGI version of PHP, but you have already"
 		@${ECHO_CMD} "installed a PHP port without CGI."
 		@${FALSE}
 .    endif
 .  endif
 
 .  if ${php_ARGS:Mcli}
 .    if defined(PHP_VERSION) && ${PHP_SAPI:Mcli} == ""
 check-makevars::
 		@${ECHO_CMD} "This port requires the CLI version of PHP, but you have already"
 		@${ECHO_CMD} "installed a PHP port without CLI."
 		@${FALSE}
 .    endif
 .  endif
 
 .  if ${php_ARGS:Membed}
 .    if defined(PHP_VERSION) && ${PHP_SAPI:Membed} == ""
 check-makevars::
 		@${ECHO_CMD} "This port requires the embedded library version of PHP, but you have already"
 		@${ECHO_CMD} "installed a PHP port without the embedded library."
 		@${FALSE}
 .    endif
 .  endif
 
 PHP_PORT?=	lang/php${PHP_VER}
 MOD_PHP_PORT?=	www/mod_php${PHP_VER}
 
 .  if ${php_ARGS:Mbuild}
 BUILD_DEPENDS+=	${PHPBASE}/include/php/main/php.h:${PHP_PORT}
 .  endif
 RUN_DEPENDS+=	${PHPBASE}/include/php/main/php.h:${PHP_PORT}
 .  if  ${php_ARGS:Mmod} || (${php_ARGS:Mweb} && defined(PHP_VERSION) && ${PHP_SAPI:Mcgi} == "" && ${PHP_SAPI:Mfpm} == "")
 USE_APACHE_RUN=	22+
 .include "${PORTSDIR}/Mk/Uses/apache.mk"
 # libphpX.so only has the major version number in it, so remove the last digit of PHP_VER to get it.
 RUN_DEPENDS+=	${PHPBASE}/${APACHEMODDIR}/libphp${PHP_VER:C/.$//}.so:${MOD_PHP_PORT}
 .  endif
 
 PLIST_SUB+=	PHP_EXT_DIR=${PHP_EXT_DIR}
 SUB_LIST+=	PHP_EXT_DIR=${PHP_EXT_DIR}
 
 .  if ${php_ARGS:Mphpize} || ${php_ARGS:Mext} || ${php_ARGS:Mzend}
 BUILD_DEPENDS+=	${PHPBASE}/bin/phpize:${PHP_PORT} \
 		autoconf>0:devel/autoconf
 GNU_CONFIGURE=	yes
 CONFIGURE_ARGS+=--with-php-config=${PHPBASE}/bin/php-config
 
 _USES_configure+=	190:phpize-message 250:do-phpize
 
 phpize-message:
 	@${ECHO_MSG} "===>  PHPizing for ${PKGNAME}"
 
 do-phpize:
 	@(cd ${WRKSRC}; ${SETENV} ${SCRIPTS_ENV} ${PHPBASE}/bin/phpize)
 .  endif
 
 _USES_POST+=php
 .endif
 
 .if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PHP_POST_MK)
 
 _INCLUDE_USES_PHP_POST_MK=yes
 
 .  if ${php_ARGS:Mext} || ${php_ARGS:Mzend}
 PHP_MODNAME?=	${PORTNAME}
 PHP_EXT_PKGMESSAGE=	${WRKDIR}/php-ext-pkg-message
 _PKGMESSAGES+=	${PHP_EXT_PKGMESSAGE}
 PHP_HEADER_DIRS+=	.
 # If there is no priority defined, we wing it.
 .    if !defined(PHP_MOD_PRIO)
 .      if defined(USE_PHP)
 # If an extension needs another, put it after the others.
 PHP_MOD_PRIO=	30
 .      else
 # Otherwise, put it where it with everybody.
 PHP_MOD_PRIO=	20
 .      endif
 .    endif
 PHP_EXT_INI_FILE=	etc/php/ext-${PHP_MOD_PRIO}-${PHP_MODNAME}.ini
 
 do-install:
 	@${MKDIR} ${STAGEDIR}${PREFIX}/lib/php/${PHP_EXT_DIR}
 	@${INSTALL_LIB} ${WRKSRC}/modules/${PHP_MODNAME}.so \
 		${STAGEDIR}${PREFIX}/lib/php/${PHP_EXT_DIR}
 .    for header in ${PHP_HEADER_DIRS}
 		@${MKDIR} ${STAGEDIR}${PREFIX}/include/php/ext/${PHP_MODNAME}/${header}
 		@${INSTALL_DATA} ${WRKSRC}/${header}/*.h \
 			${STAGEDIR}${PREFIX}/include/php/ext/${PHP_MODNAME}/${header}
 .    endfor
 	@${RM} ${STAGEDIR}${PREFIX}/include/php/ext/${PHP_MODNAME}/config.h
 	@${EGREP} "#define (COMPILE|HAVE|USE)_" ${WRKSRC}/config.h \
 		> ${STAGEDIR}${PREFIX}/include/php/ext/${PHP_MODNAME}/config.h
 	@${MKDIR} ${STAGEDIR}${PREFIX}/etc/php
 .    if ${php_ARGS:Mzend}
 	@${ECHO_CMD} "zend_extension=${PHP_MODNAME}.so" > ${STAGEDIR}${PREFIX}/${PHP_EXT_INI_FILE}
 .    else
 	@${ECHO_CMD} "extension=${PHP_MODNAME}.so" > ${STAGEDIR}${PREFIX}/${PHP_EXT_INI_FILE}
 .    endif
 
 _USES_stage+=	899:add-plist-phpext
 add-plist-phpext:
 	@${ECHO_CMD} "lib/php/${PHP_EXT_DIR}/${PHP_MODNAME}.so" \
 		>> ${TMPPLIST}
 	@${FIND} -P ${STAGEDIR}${PREFIX}/include/php/ext/${PHP_MODNAME} ! -type d 2>/dev/null | \
 		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST}
 	@${ECHO_CMD} "@postexec echo \#include \\\"ext/${PHP_MODNAME}/config.h\\\" >> %D/include/php/ext/php_config.h" \
 		>> ${TMPPLIST}
 	@${ECHO_CMD} "@preunexec cp %D/include/php/ext/php_config.h %D/include/php/ext/php_config.h.orig" \
 		>> ${TMPPLIST}
 	@${ECHO_CMD} "@preunexec grep -v ext/${PHP_MODNAME}/config.h %D/include/php/ext/php_config.h.orig > %D/include/php/ext/php_config.h || true" \
 		>> ${TMPPLIST}
 	@${ECHO_CMD} "@preunexec ${RM} %D/include/php/ext/php_config.h.orig" \
 		>> ${TMPPLIST}
 	@${ECHO_CMD} "${PHP_EXT_INI_FILE}" \
 		>> ${TMPPLIST}
 	@${ECHO_CMD} "[" > ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "{" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "  message: <<EOD" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "This file has been added to automatically load the installed extension:" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "${PREFIX}/${PHP_EXT_INI_FILE}" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "EOD" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "  type: install" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "}" >> ${PHP_EXT_PKGMESSAGE}
 	@${ECHO_CMD} "]" >> ${PHP_EXT_PKGMESSAGE}
 .  endif
 
 # Extensions
 .  if defined(USE_PHP) && ${USE_PHP:tl} != "yes"
 # non-version specific components
 _USE_PHP_ALL=	bcmath bitset bz2 calendar ctype curl dba dom \
 		enchant exif fileinfo filter ftp gd gettext gmp \
 		hash iconv igbinary imap intl json ldap mbstring mcrypt \
 		memcache memcached mysqli odbc opcache \
 		openssl pcntl pcre pdo pdo_dblib pdo_firebird pdo_mysql \
 		pdo_odbc pdo_pgsql pdo_sqlite phar pgsql posix \
 		pspell radius readline redis session shmop simplexml snmp soap\
 		sockets spl sqlite3 sysvmsg sysvsem sysvshm \
 		tidy tokenizer xml xmlreader xmlwriter xsl zip zlib
 # version specific components
-_USE_PHP_VER72=	${_USE_PHP_ALL} interbase pdf recode sodium xmlrpc wddx
 _USE_PHP_VER73=	${_USE_PHP_ALL} interbase pdf recode sodium xmlrpc wddx
 _USE_PHP_VER74=	${_USE_PHP_ALL} ffi pdf sodium xmlrpc
 _USE_PHP_VER80=	${_USE_PHP_ALL} ffi sodium
 
 bcmath_DEPENDS=	math/php${PHP_VER}-bcmath
 bitset_DEPENDS=	math/pecl-bitset@${PHP_FLAVOR}
 bz2_DEPENDS=	archivers/php${PHP_VER}-bz2
 calendar_DEPENDS=	misc/php${PHP_VER}-calendar
 ctype_DEPENDS=	textproc/php${PHP_VER}-ctype
 curl_DEPENDS=	ftp/php${PHP_VER}-curl
 dba_DEPENDS=	databases/php${PHP_VER}-dba
 dbase_DEPENDS=	databases/php${PHP_VER}-dbase
 dom_DEPENDS=	textproc/php${PHP_VER}-dom
 enchant_DEPENDS=	textproc/php${PHP_VER}-enchant
 exif_DEPENDS=	graphics/php${PHP_VER}-exif
 ffi_DEPENDS=	devel/php${PHP_VER}-ffi
 fileinfo_DEPENDS=	sysutils/php${PHP_VER}-fileinfo
 filter_DEPENDS=	security/php${PHP_VER}-filter
 ftp_DEPENDS=	ftp/php${PHP_VER}-ftp
 gd_DEPENDS=	graphics/php${PHP_VER}-gd
 gettext_DEPENDS=devel/php${PHP_VER}-gettext
 gmp_DEPENDS=	math/php${PHP_VER}-gmp
 hash_DEPENDS=	security/php${PHP_VER}-hash
 iconv_DEPENDS=	converters/php${PHP_VER}-iconv
 igbinary_DEPENDS=	converters/pecl-igbinary@${PHP_FLAVOR}
 imap_DEPENDS=	mail/php${PHP_VER}-imap
 interbase_DEPENDS=	databases/php${PHP_VER}-interbase
 intl_DEPENDS=	devel/php${PHP_VER}-intl
 json_DEPENDS=	devel/php${PHP_VER}-json
 ldap_DEPENDS=	net/php${PHP_VER}-ldap
 mbstring_DEPENDS=	converters/php${PHP_VER}-mbstring
 mcrypt_DEPENDS=	security/pecl-mcrypt@${PHP_FLAVOR}
 memcache_DEPENDS=	databases/pecl-memcache@${PHP_FLAVOR}
 memcached_DEPENDS=	databases/pecl-memcached@${PHP_FLAVOR}
 mssql_DEPENDS=	databases/php${PHP_VER}-mssql
 mysqli_DEPENDS=	databases/php${PHP_VER}-mysqli
 odbc_DEPENDS=	databases/php${PHP_VER}-odbc
 opcache_DEPENDS=	www/php${PHP_VER}-opcache
 openssl_DEPENDS=security/php${PHP_VER}-openssl
 pcntl_DEPENDS=	devel/php${PHP_VER}-pcntl
 pdf_DEPENDS=	print/pecl-pdflib@${PHP_FLAVOR}
 pdo_DEPENDS=	databases/php${PHP_VER}-pdo
 pdo_dblib_DEPENDS=	databases/php${PHP_VER}-pdo_dblib
 pdo_firebird_DEPENDS=	databases/php${PHP_VER}-pdo_firebird
 pdo_mysql_DEPENDS=	databases/php${PHP_VER}-pdo_mysql
 pdo_odbc_DEPENDS=	databases/php${PHP_VER}-pdo_odbc
 pdo_pgsql_DEPENDS=	databases/php${PHP_VER}-pdo_pgsql
 pdo_sqlite_DEPENDS=	databases/php${PHP_VER}-pdo_sqlite
 pgsql_DEPENDS=	databases/php${PHP_VER}-pgsql
 phar_DEPENDS=	archivers/php${PHP_VER}-phar
 posix_DEPENDS=	sysutils/php${PHP_VER}-posix
 pspell_DEPENDS=	textproc/php${PHP_VER}-pspell
 radius_DEPENDS=	net/pecl-radius@${PHP_FLAVOR}
 readline_DEPENDS=	devel/php${PHP_VER}-readline
 recode_DEPENDS=	converters/php${PHP_VER}-recode
 redis_DEPENDS=	databases/pecl-redis@${PHP_FLAVOR}
 session_DEPENDS=www/php${PHP_VER}-session
 shmop_DEPENDS=	devel/php${PHP_VER}-shmop
 simplexml_DEPENDS=	textproc/php${PHP_VER}-simplexml
 snmp_DEPENDS=	net-mgmt/php${PHP_VER}-snmp
 soap_DEPENDS=	net/php${PHP_VER}-soap
 sockets_DEPENDS=net/php${PHP_VER}-sockets
 sodium_DEPENDS=	security/php${PHP_VER}-sodium
 sqlite3_DEPENDS=databases/php${PHP_VER}-sqlite3
 sybase_ct_DEPENDS=	databases/php${PHP_VER}-sybase_ct
 sysvmsg_DEPENDS=devel/php${PHP_VER}-sysvmsg
 sysvsem_DEPENDS=devel/php${PHP_VER}-sysvsem
 sysvshm_DEPENDS=devel/php${PHP_VER}-sysvshm
 tidy_DEPENDS=	www/php${PHP_VER}-tidy
 tokenizer_DEPENDS=	devel/php${PHP_VER}-tokenizer
 wddx_DEPENDS=	textproc/php${PHP_VER}-wddx
 xml_DEPENDS=	textproc/php${PHP_VER}-xml
 xmlreader_DEPENDS=	textproc/php${PHP_VER}-xmlreader
 xmlrpc_DEPENDS=	net/php${PHP_VER}-xmlrpc
 xmlwriter_DEPENDS=	textproc/php${PHP_VER}-xmlwriter
 xsl_DEPENDS=	textproc/php${PHP_VER}-xsl
 zip_DEPENDS=	archivers/php${PHP_VER}-zip
 zlib_DEPENDS=	archivers/php${PHP_VER}-zlib
 
 .    for extension in ${USE_PHP}
 ext=		${extension}
 .      if !empty(_USE_PHP_VER${PHP_VER}:M${extension:S/:build//})
 .        if empty(PHP_EXT_INC:M${extension:S/:build//})
 .          if !empty(php_ARGS:Mbuild) || !empty(ext:M*\:build)
 BUILD_DEPENDS+=	${PHPBASE}/lib/php/${PHP_EXT_DIR}/${extension:S/:build//}.so:${${extension:S/:build//}_DEPENDS}
 .          endif
 RUN_DEPENDS+=	${PHPBASE}/lib/php/${PHP_EXT_DIR}/${extension:S/:build//}.so:${${extension:S/:build//}_DEPENDS}
 .        endif
 .      else
 .        if ${ext:tl} != "yes" && !defined(_IGNORE_PHP_SET)
 check-makevars::
 			@${ECHO_CMD} "Unknown extension ${extension:S/:build//} for PHP ${PHP_VER}."
 			@${FALSE}
 .        endif
 .      endif
 .    endfor
 .  endif
 .endif
Index: head/Mk/bsd.default-versions.mk
===================================================================
--- head/Mk/bsd.default-versions.mk	(revision 559719)
+++ head/Mk/bsd.default-versions.mk	(revision 559720)
@@ -1,157 +1,157 @@
 # $FreeBSD$
 #
 # MAINTAINER:	ports@FreeBSD.org
 #
 # Note: before committing to this file, contact portmgr to arrange for an
 # experimental ports run.  Untested commits may be backed out at portmgr's
 # discretion.
 #
 # Provide default versions for ports with multiple versions selectable
 # by the user.
 #
 # Users who want to override these defaults can easily do so by defining
 # DEFAULT_VERSIONS in their make.conf as follows:
 #
 #   DEFAULT_VERSIONS=	perl5=5.20 ruby=2.0
 
 .if !defined(_INCLUDE_BSD_DEFAULT_VERSIONS_MK)
 _INCLUDE_BSD_DEFAULT_VERSIONS_MK=	yes
 
 LOCALBASE?=	/usr/local
 
 .for lang in APACHE BDB COROSYNC EMACS FIREBIRD FORTRAN FPC GCC GHOSTSCRIPT \
 	JAVA JULIA LAZARUS LIBRSVG2 LINUX LLVM LUA MYSQL PERL5 PGSQL PHP PYTHON PYTHON2 \
 	PYTHON3 RUBY RUST SAMBA SSL TCLTK VARNISH
 .if defined(${lang}_DEFAULT)
 ERROR+=	"The variable ${lang}_DEFAULT is set and it should only be defined through DEFAULT_VERSIONS+=${lang:tl}=${${lang}_DEFAULT} in /etc/make.conf"
 .endif
 #.undef ${lang}_DEFAULT
 .endfor
 
 .for lang in ${DEFAULT_VERSIONS}
 _l=		${lang:C/=.*//g}
 ${_l:tu}_DEFAULT=	${lang:C/.*=//g}
 .endfor
 
 # Possible values: 2.4
 APACHE_DEFAULT?=	2.4
 # Possible values: 5, 6, 18
 BDB_DEFAULT?=		5
 # Possible values: 2, 3
 COROSYNC_DEFAULT?=	2
 # Possible_values: full canna nox devel_full devel_nox
 #EMACS_DEFAULT?=	let the flavor be the default if not explicitly set
 # Possible values: 2.5
 FIREBIRD_DEFAULT?=	2.5
 # Possible values: flang (experimental), gfortran
 FORTRAN_DEFAULT?=	gfortran
 # Possible values: 3.2.0
 FPC_DEFAULT?=		3.2.0
 # Possible values: 8, 9 (powerpcspe was dropped with GCC 9), 10
 .if ${ARCH} == "powerpcspe"
 GCC_DEFAULT?=		8
 .elif ${ARCH} == "powerpc64le"
 GCC_DEFAULT?=		10
 .else
 GCC_DEFAULT?=		9
 .endif
 # Possible values: 7, 8, 9, agpl
 GHOSTSCRIPT_DEFAULT?=	agpl
 # Possible values: 7, 8, 11, 12, 13, 14, 15
 JAVA_DEFAULT?=		8
 # Possible values: 0.6, 0.7, 1.0, 1.1
 JULIA_DEFAULT?=		1.0
 # Possible values: 2.0.10
 LAZARUS_DEFAULT?=	2.0.10
 # Possible values: rust legacy
 .if empty(ARCH:Naarch64:Narmv6:Narmv7:Namd64:Ni386:Npowerpc64:Npowerpc64le)
 LIBRSVG2_DEFAULT?=	rust
 .else
 LIBRSVG2_DEFAULT?=	legacy
 .endif
 # Possible values: c7
 LINUX_DEFAULT?=		c7
 # Possible values: 60, 70, 80, 90, -devel (to be used when non-base compiler is required)
 # Please give notice to the Graphics Team (x11@FreeBSD.org) in advance before 
 # bumping the LLVM version.
 LLVM_DEFAULT?=		90
 # Possible values: 5.1, 5.2, 5.3, 5.4
 LUA_DEFAULT?=		5.2
 # Possible values: 5.10, 5.20, 6.8
 MONO_DEFAULT=		5.10
 # Possible values: 5.5, 5.6, 5.7, 8.0, 10.3m, 10.4m, 10.5m, 5.5p, 5.6p, 5.7p, 5.6w, 5.7w
 MYSQL_DEFAULT?=		5.7
 # Possible values: 5.28, 5.30, 5.32, devel
 .if !exists(${LOCALBASE}/bin/perl) || (!defined(_PORTS_ENV_CHECK) && \
     defined(PACKAGE_BUILDING))
 PERL5_DEFAULT?=		5.32
 .elif !defined(PERL5_DEFAULT)
 # There's no need to replace development versions, like "5.23" with "devel"
 # because 1) nobody is supposed to use it outside of poudriere, and 2) it must
 # be set manually in /etc/make.conf in the first place, and we're never getting
 # in here.
 .if !defined(_PERL5_FROM_BIN)
 _PERL5_FROM_BIN!=	${LOCALBASE}/bin/perl -e 'printf "%vd\n", $$^V;'
 .endif
 _EXPORTED_VARS+=	_PERL5_FROM_BIN
 PERL5_DEFAULT:=		${_PERL5_FROM_BIN:R}
 .endif
 # Possible values: 9.5, 9.6, 10, 11, 12, 13
 PGSQL_DEFAULT?=		12
-# Possible values: 7.2, 7.3, 7.4
+# Possible values: 7.3, 7.4 8.0
 PHP_DEFAULT?=		7.4
 # Possible values: 2.7, 3.6, 3.7, 3.8, 3.9
 PYTHON_DEFAULT?=	3.7
 # Possible values: 2.7
 PYTHON2_DEFAULT?=	2.7
 # Possible values: 3.6, 3.7, 3.8, 3.9
 PYTHON3_DEFAULT?=	3.7
 # Possible values: 2.5, 2.6, 2.7, 3.0
 RUBY_DEFAULT?=		2.7
 # Possible values: rust, rust-nightly
 RUST_DEFAULT?=		rust
 # Possible values: 4.11, 4.12, 4.13
 SAMBA_DEFAULT?=		4.12
 # Possible values: base, openssl, libressl, libressl-devel
 .if !defined(SSL_DEFAULT)
 #	If no preference was set, check for an installed base version
 #	but give an installed port preference over it.
 .  if	!defined(SSL_DEFAULT) && \
 	!exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so) && \
 	exists(${DESTDIR}/usr/include/openssl/opensslv.h)
 SSL_DEFAULT=	base
 .  else
 .    if exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so)
 .      if defined(PKG_BIN)
 # find installed port and use it for dependency
 .        if !defined(OPENSSL_INSTALLED)
 .          if defined(DESTDIR)
 PKGARGS=	-c ${DESTDIR}
 .          else
 PKGARGS=
 .          endif
 OPENSSL_INSTALLED!=	${PKG_BIN} ${PKGARGS} which -qo ${LOCALBASE}/lib/libcrypto.so || :
 .        endif
 .        if defined(OPENSSL_INSTALLED) && !empty(OPENSSL_INSTALLED)
 SSL_DEFAULT:=		${OPENSSL_INSTALLED:T}
 WARNING+=	"You have ${OPENSSL_INSTALLED} installed but do not have DEFAULT_VERSIONS+=ssl=${SSL_DEFAULT} set in your make.conf"
 .        endif
 .      else
 check-makevars::
 	@${ECHO_MSG} "You have a ${LOCALBASE}/lib/libcrypto.so file installed, but the framework is unable"
 	@${ECHO_MSG} "to determine what port it comes from."
 	@${ECHO_MSG} "Add DEFAULT_VERSIONS+=ssl=<openssl package name> to your /etc/make.conf and try again."
 	@${FALSE}
 .      endif
 .    endif
 .  endif
 # Make sure we have a default in the end
 SSL_DEFAULT?=	base
 .endif
 # Possible values: 8.5, 8.6, 8.7
 TCLTK_DEFAULT?=		8.6
 
 # Possible values: 4, 6
 VARNISH_DEFAULT?=	4
 
 .endif