Index: head/textproc/apache-solr/files/pkg-message.in
===================================================================
--- head/textproc/apache-solr/files/pkg-message.in	(revision 508909)
+++ head/textproc/apache-solr/files/pkg-message.in	(revision 508910)
@@ -1,42 +1,45 @@
-=======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Make sure to edit the following files to adapt to your setup:
 
 %%LOCALBASE%%/etc/solr.in.sh
 /var/db/solr/solr.xml
 
 All files are configured to have your solr instances running in
 /var/db/solr/<instancename>
 
 For more information how to configure solr check the manual:
 http://lucene.apache.org/solr/resources.html#documentation
 
 The port is configured to listen only on localhost, port 8983.
 
 To have a working initial config, use:
 
 cp -R %%LOCALBASE%%/solr/example/example-DIH/solr/solr /var/db/solr/
 chown -R solr /var/db/solr/solr
 
 To rotate solr log files include /var/log/solr/ to your log rotation
 configuration.
 
 To enable the port execute:
 sysrc solr_enable="YES"
 
 And start it with:
 service solr start
-
------------------------------------------------------------------------
-
+EOM
+}
+{ type: upgrade
+  message: <<EOM
 If you update, make sure you update your %%LOCALBASE%%/etc/solr.in.sh
 The LOG4J_PROPS has changed.
 If you would like to change logging, copy:
 cp %%LOCALBASE%%/solr/server/resources/log4j2.xml /var/db/solr/
 Change it and make sure it is loaded in %%LOCALBASE%%/etc/solr.in.sh.
 
 Make also sure to always check the manual if you need to modify your
 configs or schemas:
 https://www-eu.apache.org/dist/lucene/solr/8.0.0/changes/Changes.html
-
-=======================================================================
+EOM
+}
+]

Property changes on: head/textproc/apache-solr/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-ON
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/textproc/codespell/files/pkg-message.in
===================================================================
--- head/textproc/codespell/files/pkg-message.in	(revision 508909)
+++ head/textproc/codespell/files/pkg-message.in	(revision 508910)
@@ -1,7 +1,9 @@
-***************************************************************
-
+[
+{ type: install
+  message: <<EOM
 You have successfully installed codespell!
 The dictionary file has been installed to:
 %%EXAMPLESDIR%%/data/dictionary.txt
-
-***************************************************************
+EOM
+}
+]
Index: head/textproc/crimson/files/pkg-message.in
===================================================================
--- head/textproc/crimson/files/pkg-message.in	(revision 508909)
+++ head/textproc/crimson/files/pkg-message.in	(revision 508910)
@@ -1,13 +1,19 @@
+[
+{ type: install
+  message: <<EOM
 The following jar file has been installed:
 
   %%PREFIX%%/share/java/classes/crimson.jar
 
 Add it to your CLASSPATH to use JAXP.
 
 NOTE:
   If you used previous versions of crimson, please note that there is
   now only one jar file, crimson.jar.  You should remove the old port
   and any references to the jaxp.jar to avoid confusion.
 
 Documentation is in %%PREFIX%%/share/doc/crimson
 Examples is in %%PREFIX%%/share/examples/crimson
+EOM
+}
+]
Index: head/textproc/dictionary/pkg-message
===================================================================
--- head/textproc/dictionary/pkg-message	(revision 508909)
+++ head/textproc/dictionary/pkg-message	(revision 508910)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 To use dictionary, add to your ~/.emacs the following line:
 
 (load "dictionary-init")
+EOM
+}
+]
Index: head/textproc/diff-so-fancy/files/pkg-message.in
===================================================================
--- head/textproc/diff-so-fancy/files/pkg-message.in	(revision 508909)
+++ head/textproc/diff-so-fancy/files/pkg-message.in	(revision 508910)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 diff-so-fancy is normally used to format git's diff output.
 
 In order to configure git to use diff-so-fancy automatically, you can run:
     $ git config --global core.pager "diff-so-fancy | less -R"
 
 See %%DOCSDIR%%/readme.md for more information.
+EOM
+}
+]
Index: head/textproc/dsssl-docbook-modular/pkg-message
===================================================================
--- head/textproc/dsssl-docbook-modular/pkg-message	(revision 508909)
+++ head/textproc/dsssl-docbook-modular/pkg-message	(revision 508910)
@@ -1,16 +1,22 @@
+[
+{ type: install
+  message: <<EOM
 These are DSSSL stylesheets for the DocBook DTD by Norm Walsh. Use them
 in conjunction with a DSSSL processor (such as jade) to convert documents
 marked up as DocBook to other formats.
 
 For example (assume $DBPATH = $PREFIX/share/sgml/docbook/dsssl/modular)
 
    jade -t sgml -d $DBPATH/html/docbook.dsl  filename.sgml  (DocBook -> HTML)
    jade -t rtf  -d $DBPATH/print/docbook.dsl filename.sgml  (DocBook -> RTF )
    jade -t tex  -d $DBPATH/print/docbook.dsl filename.sgml  (DocBook -> TeX )
 
 To further parse the output of the 'tex' transformation you will need the
 'jadetex' macros, which may not yet have been ported.
 
 More documentation (in HTML format) is available in
 
    $PREFIX/share/sgml/docbook/dsssl/modular/doc/
+EOM
+}
+]
Index: head/textproc/elasticsearch5/files/pkg-message.in
===================================================================
--- head/textproc/elasticsearch5/files/pkg-message.in	(revision 508909)
+++ head/textproc/elasticsearch5/files/pkg-message.in	(revision 508910)
@@ -1,24 +1,26 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Please see %%ETCDIR%% for sample versions of
 elasticsearch.yml and logging.yml.
 
 ElasticSearch requires memory locking of large amounts of RAM.
 You will either need to set:
 
 sysrc elasticsearch_login_class="root"
 
 or
 
 sysctl security.bsd.unprivileged_mlock=1
 
 to prevent the process from failing the bootstrap.
 
 Do note that you need to set
 
 bootstrap.system_call_filter: false
 
 in your elasticsearch.yml file to successfully bootstrap on non-Linux
 OSes now.
-
-======================================================================
+EOM
+}
+]
Index: head/textproc/elasticsearch5-search-guard/pkg-message
===================================================================
--- head/textproc/elasticsearch5-search-guard/pkg-message	(revision 508909)
+++ head/textproc/elasticsearch5-search-guard/pkg-message	(revision 508910)
@@ -1,21 +1,25 @@
--------------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 cd into %%PREFIX%%/lib/elasticsearch/plugins/search-guard-5/tools/
 
 Execute ./install_demo_configuration.sh, chmod the script first if necessary. 
 This will generate all required TLS certificates and add the Search Guard 
 configuration to your elasticsearch.yml file.
 
 Start Elasticsearch (service elasticsearch start)
 
 Execute ./sgadmin_demo.sh, chmod the script if necessary first. This will
 execute sgadmin and populate the Search Guard configuration index 
 with the files contained in the plugins/search-guard-<version>/sgconfig
 directory.
 
 Test the installation by visiting https://localhost:9200. When prompted,
 use admin/admin as username and password. This user has full access
 to the cluster.
 
 Display information about the currently logged in user by visiting
  https://localhost:9200/_searchguard/authinfo
--------------------------------------------------------------------------------
+EOM
+}
+]

Property changes on: head/textproc/elasticsearch5-search-guard/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/textproc/elasticsearch6/files/pkg-message.in
===================================================================
--- head/textproc/elasticsearch6/files/pkg-message.in	(revision 508909)
+++ head/textproc/elasticsearch6/files/pkg-message.in	(revision 508910)
@@ -1,32 +1,34 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Please see %%ETCDIR%% for sample versions of
 elasticsearch.yml and logging.yml.
 
 ElasticSearch requires memory locking of large amounts of RAM.
 You may need to set:
 
 sysctl security.bsd.unprivileged_mlock=1
 
 !!! PLUGINS NOTICE !!!
 
 ElasticSearch plugins should only be installed via the elasticsearch-plugin
 included with this software. As we strive to provide a minimum semblance
 of security, the files installed by the package are owned by root:wheel.
 This is different than upstream hich expects all of the files to be
 owned by the user and for you to execute the elasticsearch-plugin script
 as said user.
 
 You will encounter permissions errors with configuration files and
 directories created by plugins which you will have to manually correct.
 This is the price we have to pay to protect ourselves in the face of
 a poorly designed security model.
 
 e.g., after installing X-Pack you will have to correct:
 
 %%ETCDIR%%/elasticsearch.keystore file to be owned by elasticsearch:elasticsearch
 %%ETCDIR%%/x-pack directory/files to be owned by elasticsearch:elasticsearch
 
 !!! PLUGINS NOTICE !!!
-
-======================================================================
+EOM
+}
+]
Index: head/textproc/extract_url/files/pkg-message.in
===================================================================
--- head/textproc/extract_url/files/pkg-message.in	(revision 508909)
+++ head/textproc/extract_url/files/pkg-message.in	(revision 508910)
@@ -1,15 +1,17 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 extract_url has been installed.
 
 If you don't have ~/.extract_urlview
 
 the extract_url configuration file can be copied, please type as user:
 
     su - user
 
     cp %%DATADIR%%/extract_urlview.sample ~/.extract_urlview
 
     exit
-
-===============================================================================
+EOM
+}
+]
Index: head/textproc/fzf/files/pkg-message.in
===================================================================
--- head/textproc/fzf/files/pkg-message.in	(revision 508909)
+++ head/textproc/fzf/files/pkg-message.in	(revision 508910)
@@ -1,5 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 Various shell key bindings and completion files have been installed
 to %%EXAMPLESDIR%%/shell.
 
 To use these include them in your shell configuration.
-
+EOM
+}
+]
Index: head/textproc/hevea/pkg-message
===================================================================
--- head/textproc/hevea/pkg-message	(revision 508909)
+++ head/textproc/hevea/pkg-message	(revision 508910)
@@ -1,9 +1,13 @@
-==============================================================
+[
+{ type: install
+  message: <<EOM
 You may like to put the file hevea.sty in a place where latex
 can find it.  For example, if you are using teTeX from the
 ports, the following commands will do the job:
 
 mkdir -p /usr/local/share/texmf/tex/latex/hevea
 cp /usr/local/lib/hevea/hevea.sty /usr/local/share/texmf/tex/latex/hevea
 texhash
-==============================================================
+EOM
+}
+]
Index: head/textproc/htmlize.el/pkg-message
===================================================================
--- head/textproc/htmlize.el/pkg-message	(revision 508909)
+++ head/textproc/htmlize.el/pkg-message	(revision 508910)
@@ -1,10 +1,13 @@
-****************************************************************************
+[
+{ type: install
+  message: <<EOM
 To use htmlize mode, add to your ~/.emacs the following lines:
 
 ;; Enable syntax colouring
 (global-font-lock-mode)
 
 ;; General emacs to HTML converter
 (require 'htmlize)
-
-****************************************************************************
+EOM
+}
+]
Index: head/textproc/ibus/pkg-message
===================================================================
--- head/textproc/ibus/pkg-message	(revision 508909)
+++ head/textproc/ibus/pkg-message	(revision 508910)
@@ -1,51 +1,55 @@
--------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 ibus installation finished. To use ibus, please do the following:
 
 If you are using bash, please add following lines to your $HOME/.bashrc:
 
 export XIM=ibus
 export GTK_IM_MODULE=ibus
 export QT_IM_MODULE=xim
 export XMODIFIERS=@im=ibus
 export XIM_PROGRAM="ibus-daemon"
 export XIM_ARGS="--daemonize --xim"
 
 If you are using tcsh, please add following lines to your $HOME/.cshrc:
 
 setenv XIM ibus
 setenv GTK_IM_MODULE ibus
 setenv QT_IM_MODULE xim
 setenv XMODIFIERS @im=ibus
 setenv XIM_PROGRAM ibus-daemon
 setenv XIM_ARGS "--daemonize --xim"
 
 If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
 and add following lines:
 
 #!/bin/sh
 export XIM=ibus
 export GTK_IM_MODULE=ibus
 export QT_IM_MODULE=xim
 export XMODIFIERS=@im=ibus
 export XIM_PROGRAM="ibus-daemon"
 export XIM_ARGS="--daemonize --xim"
 
 Following input methods/engines are available in ports:
 
 chinese/ibus-chewing		Chewing engine for IBus
 chinese/ibus-libpinyin		Intelligent Pinyin engine based on libpinyin
 chinese/ibus-pinyin		The PinYin input method
 japanese/ibus-anthy		Anthy engine for IBus
 japanese/ibus-mozc		Mozc engine for IBus
 japanese/ibus-skk		SKK engine for IBus
 korean/ibus-hangul		Hangul engine for IBus
 textproc/ibus-kmfl		KMFL IMEngine for IBus framework
 textproc/ibus-m17n		m17n IM engine for IBus framework
 textproc/ibus-table		Table based IM framework for IBus
 textproc/ibus-typing-booster    Faster typing by context sensitive completion
 
 and QT4 input method module, textproc/ibus-qt.
 
 If ibus cannot start or the panel does not appear, please ensure
 that you are using up-to-date python.
--------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/ibus-typing-booster/pkg-message
===================================================================
--- head/textproc/ibus-typing-booster/pkg-message	(revision 508909)
+++ head/textproc/ibus-typing-booster/pkg-message	(revision 508910)
@@ -1,4 +1,9 @@
-
+[
+{ type: install
+  message: <<EOM
 It is recommanded to install a font with emoji, e.g. x11-fonts/twemoji-color-font-ttf .
 
 And do not forget to run `ibus restart' after an upgrade.
+EOM
+}
+]
Index: head/textproc/kmfl-european-latin/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-european-latin/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-european-latin/files/pkg-message.in	(revision 508910)
@@ -1,8 +1,12 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Others" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   The documentation is installed into:
   %%DOCSDIR%%
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-sil-ezra/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-sil-ezra/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-sil-ezra/files/pkg-message.in	(revision 508910)
@@ -1,11 +1,15 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Hebrew" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   The documentation is installed into:
   %%DOCSDIR%%
   Please note that some documentation files are
   officially released in proprietary formats only and
   that they are installed as such.
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-sil-galatia/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-sil-galatia/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-sil-galatia/files/pkg-message.in	(revision 508910)
@@ -1,8 +1,12 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Greek" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   The documentation is installed into:
   %%DOCSDIR%%
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-sil-ipa-unicode/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-sil-ipa-unicode/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-sil-ipa-unicode/files/pkg-message.in	(revision 508910)
@@ -1,8 +1,12 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Others" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   The documentation is installed into:
   %%LOCALBASE%%/%%DOCSDIR%%
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-sil-panafrican-latin/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-sil-panafrican-latin/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-sil-panafrican-latin/files/pkg-message.in	(revision 508910)
@@ -1,8 +1,12 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Others" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   The documentation is installed into:
   %%LOCALBASE%%/%%DOCSDIR%%
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-sil-yi/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-sil-yi/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-sil-yi/files/pkg-message.in	(revision 508910)
@@ -1,10 +1,14 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Others" in your SCIM/IBus menu. If you don't see it,
   restart X.
 
   At the moment, this keyboard has no documentation.
   As a general rule, type the Pinyin romanization for
   that syllable, followed by a space. For punctuation,
   try usual punctuation keystrokes.
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmfl-varamozhi-malayalam/files/pkg-message.in
===================================================================
--- head/textproc/kmfl-varamozhi-malayalam/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmfl-varamozhi-malayalam/files/pkg-message.in	(revision 508910)
@@ -1,10 +1,14 @@
----------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   You should now have the new keyboard in the section
   "Malayalam" in your SCIM/IBus menu. If you don't see
   it, restart X.
 
   At the moment, this keyboard has no downloadable
   documentation. For the details on the Mozhi scheme,
   please see the Project's homepage, especially
   https://sites.google.com/site/cibu/mozhi.
----------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/kmflcomp/files/pkg-message.in
===================================================================
--- head/textproc/kmflcomp/files/pkg-message.in	(revision 508909)
+++ head/textproc/kmflcomp/files/pkg-message.in	(revision 508910)
@@ -1,20 +1,23 @@
-
-------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   Please note that kmflcomp only compiles keyboard sources written in
   Keyman keyboard language (.kmn) into .kmfl binaries. KMFL is source
   compatible with keyboards developed for Keyman. Binary keyboards
   compiled for Keyman will not run under KMFL. KMFL is also Unicode
   based, and does not support legacy code pages and encodings.
 
   The Keyman keyboard language is documented in
 
     %%PREFIX%%/share/doc/kmfl/kmflcomp/KMFL-Compiler.sxw
 
   Tavultesoft documentation is available on
 
     http://tavultesoft.com/keymandev/documentation/help/main/guide.php
 
   You need textproc/scim-kmfl-imengine to use KMFL keyboards through
   SCIM, or textproc/ibus-kmfl to use them through IBus. The keyboard
   ports are textproc/kmfl-*.
-------------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/latex2html/files/pkg-message.in
===================================================================
--- head/textproc/latex2html/files/pkg-message.in	(revision 508909)
+++ head/textproc/latex2html/files/pkg-message.in	(revision 508910)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 ****  Individual user configurations can be accomplished by placing a copy
       of %%DATADIR%%/dot.latex2html-init in the user's home
       directory and editing to preference.
+EOM
+}
+]
Index: head/textproc/markdown-mode.el/pkg-message
===================================================================
--- head/textproc/markdown-mode.el/pkg-message	(revision 508909)
+++ head/textproc/markdown-mode.el/pkg-message	(revision 508910)
@@ -1,12 +1,14 @@
-========================================================================
-
+[
+{ type: install
+  message: <<EOM
 To use markdown-mode in Emacs/XEmacs, add the following lines to
 your ~/.emacs replacing "text" with your preferred markdown extension.
 
 (autoload 'markdown-mode "markdown-mode.el"
   "Major mode for editing Markdown files" t)
 
 (setq auto-mode-alist
   (cons '("\\.text" . markdown-mode) auto-mode-alist))
-
-========================================================================
+EOM
+}
+]
Index: head/textproc/mifluz/files/pkg-message.in
===================================================================
--- head/textproc/mifluz/files/pkg-message.in	(revision 508909)
+++ head/textproc/mifluz/files/pkg-message.in	(revision 508910)
@@ -1,9 +1,11 @@
-
-*************************************************************
+[
+{ type: install
+  message: <<EOM
 A sample configuration file has been written in
 %%PREFIX%%/etc/mifluz.conf.sample
 
 You will have to copy this file to %%PREFIX%%/etc/mifluz.conf
 and edit it before using mifluz.
-*************************************************************
-
+EOM
+}
+]
Index: head/textproc/ml1/pkg-message
===================================================================
--- head/textproc/ml1/pkg-message	(revision 508909)
+++ head/textproc/ml1/pkg-message	(revision 508910)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 Additional ML/I documentation (in HTML and PDF) can be found at:
 	http://www.ml1.org.uk
+EOM
+}
+]
Index: head/textproc/py-gensim/pkg-message
===================================================================
--- head/textproc/py-gensim/pkg-message	(revision 508909)
+++ head/textproc/py-gensim/pkg-message	(revision 508910)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 If you are using the Python v3.x version and a non-Unicode locale you'll get a runtime error when mkdocs is executed..
 
 In that case please set the locale to a Unicode locale first, e.g. en_US.UTF-8 or similar, before starting mkdocs.
+EOM
+}
+]
Index: head/textproc/py-mkdocs/pkg-message
===================================================================
--- head/textproc/py-mkdocs/pkg-message	(revision 508909)
+++ head/textproc/py-mkdocs/pkg-message	(revision 508910)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 If you are using the Python v3.x version and a non-Unicode locale you'll get a runtime error when mkdocs is executed..
 
 In that case please set the locale to a Unicode locale first, e.g. en_US.UTF-8 or similar, before starting mkdocs.
+EOM
+}
+]
Index: head/textproc/py-tablib/files/pkg-message.in
===================================================================
--- head/textproc/py-tablib/files/pkg-message.in	(revision 508909)
+++ head/textproc/py-tablib/files/pkg-message.in	(revision 508910)
@@ -1,6 +1,8 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Install %%PYTHON_PKGNAMEPREFIX%%pandas (Ports directory: math/py-pandas) if you want to make use
 of the Pandas Dataframe structure.
-
-===============================================================================
+EOM
+}
+]
Index: head/textproc/qstardict/pkg-message
===================================================================
--- head/textproc/qstardict/pkg-message	(revision 508909)
+++ head/textproc/qstardict/pkg-message	(revision 508910)
@@ -1,10 +1,14 @@
-=======================================================================
+[
+{ type: install
+  message: <<EOM
 QStarDict can support for StarDict dictionaries.
 You can install some dictionaries for StarDict(QStarDict):
 
  chinese/stardict2-dict-zh_CN   Simplified Chinese - English
  chinese/stardict2-dict-zh_TW   Traditional Chinese - English
  japanese/stardict2-dict-ja     Japanese - English
  textproc/stardict2-dictd_mova	Dictionaries from www.mova.org
  textproc/stardict2-quick	Dictionaries from Quick for StarDict
-=======================================================================
+EOM
+}
+]
Index: head/textproc/resume/files/pkg-message.in
===================================================================
--- head/textproc/resume/files/pkg-message.in	(revision 508909)
+++ head/textproc/resume/files/pkg-message.in	(revision 508910)
@@ -1,12 +1,14 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 For the impatient: You can get a result just in two steps!
 
 1. Install textproc/libxslt.
 
 2. Run the command below.
 
     $ xsltproc %%PREFIX%%/share/xsl/resume/output/us-html.xsl \
                %%PREFIX%%/share/examples/resume/example1.xml
-
-************************************************************************
+EOM
+}
+]
Index: head/textproc/ruby-rd-mode.el/pkg-message
===================================================================
--- head/textproc/ruby-rd-mode.el/pkg-message	(revision 508909)
+++ head/textproc/ruby-rd-mode.el/pkg-message	(revision 508910)
@@ -1,8 +1,12 @@
-====
+[
+{ type: install
+  message: <<EOM
 To use rd-mode in Emacs/XEmacs, add the following lines to
 your ~/.emacs:
 
 (autoload 'rd-mode "rd-mode"
   "major mode for ruby document formatter RD" t)
 (add-to-list 'auto-mode-alist '("\\.rd\\(\.en\\|\.ja\\)?$" . rd-mode))
-====
+EOM
+}
+]
Index: head/textproc/ruby-rdtool/pkg-message
===================================================================
--- head/textproc/ruby-rdtool/pkg-message	(revision 508909)
+++ head/textproc/ruby-rdtool/pkg-message	(revision 508910)
@@ -1,4 +1,8 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 If you are an Emacs/XEmacs user, also install
 textproc/ruby-rd-mode.el that helps you edit RD files.
-************************************************************
+EOM
+}
+]
Index: head/textproc/rubygem-rdtool/pkg-message
===================================================================
--- head/textproc/rubygem-rdtool/pkg-message	(revision 508909)
+++ head/textproc/rubygem-rdtool/pkg-message	(revision 508910)
@@ -1,4 +1,8 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 If you are an Emacs/XEmacs user, also install
 textproc/ruby-rd-mode.el that helps you edit RD files.
-************************************************************
+EOM
+}
+]
Index: head/textproc/scim/pkg-message
===================================================================
--- head/textproc/scim/pkg-message	(revision 508909)
+++ head/textproc/scim/pkg-message	(revision 508910)
@@ -1,63 +1,67 @@
-------------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 The installation of SCIM has finished. Please note this port is only a common
 framework for input methods and does not contain any actual input methods.
 
 In the ports collection the following input methods, engines and SCIM-related
 projects are available:
 
 Language-specific IMEngines
 ---------------------------
 
  chinese/scim-array         Module for Array30
  chinese/scim-fcitx         Module for fcitx
  chinese/scim-pinyin        Smart Pinyin method
  chinese/scim-tables        Table based input methods:
                               Array30, CangJie, Cantonese, Dayi, Erbi, EZ,
                               Jyutping, Simplex, Stroke, Wubi, Ziranma, ZhuYin
                             (with textproc/scim-tables)
 
  japanese/scim-anthy        Module using Anthy input method
  japanese/scim-canna        Module using Canna
  japanese/scim-honoka       The core of Honoka library that covers
                               wnn, anthy, prime, skk and canna
                             Use it with
                               japanese/scim-honoka-plugin-romkan
                               japanese/scim-honoka-plugin-wnn
  japanese/scim-prime        Module using PRIME
  japanese/scim-skk          Module like SKK input
  japanese/scim-tables       Table based input methods:
                               HIRAGANA, KATAKANA, Nippon
                             (with textproc/scim-tables)
  japanese/scim-tomoe        Module using Tomoe
  japanese/scim-uim          Module using the uim input method library
 
  korean/scim-hangul         Module for Korean Hangul input
  korean/scim-tables         Table based input methods:
                               Hangul, Hanja
                             (with textproc/scim-tables)
 
 Multi-language IMEngines
 ------------------------
 
  textproc/scim-kmfl-imengine   Platform for Keyman (KMN) language keyboards,
    textproc/scim-kmfl-*        available through textproc/scim-kmfl-* ports.
                                They provide support for Ancient Greek,
                                Biblical Hebrew, Yi, IPA, African languages
                                and more
  textproc/scim-m17n            Module which uses m17n library as the backend
  textproc/scim-openvanilla     Input method to use modules of OpenVanilla
                                (Traditional/Simplified Chinese and Tibetan)
  textproc/scim-table-imengine  Engine for table based input methods
                                (see language-specific tables above)
 
 Additional SCIM-related projects
 --------------------------------
 
  textproc/scim-bridge          Scim-bridge agent (a wrapper library for SCIM)
  textproc/scim-bridge-qt4      Qt4 client for SCIM-bridge
  textproc/scim-input-pad       Add-on to input symbols with on-screen pad
  textproc/skim                 SCIM integration into KDE
 
 As a common rule, set XMODIFIERS to '@im=SCIM' and use `scim -d' to start the
 scim daemon.
-------------------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/scim-input-pad/pkg-message
===================================================================
--- head/textproc/scim-input-pad/pkg-message	(revision 508909)
+++ head/textproc/scim-input-pad/pkg-message	(revision 508910)
@@ -1,5 +1,9 @@
---------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 1) Remember to set environment variable XMODIFIERS with scim
 2) use ``scim-input-pad'' command or right click on the SCIM
    and choose ``Input Pad'' to start scim-input-pad
---------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/scim-kmfl-imengine/files/pkg-message.in
===================================================================
--- head/textproc/scim-kmfl-imengine/files/pkg-message.in	(revision 508909)
+++ head/textproc/scim-kmfl-imengine/files/pkg-message.in	(revision 508910)
@@ -1,12 +1,15 @@
-
-------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
   SCIM-Setup IMEngine list should now have KMFL section.
 
   The documentation for KMN language and use of KMFL SCIM interface
   is installed through textproc/kmflcomp port. Please refer to
 
     %%PREFIX%%/share/doc/kmfl/kmflcomp/KMFL-Compiler.sxw
 
   You need textproc/kmfl-* ports in order to use actual keyboards
   through SCIM.
-------------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/scim-table-imengine/pkg-message
===================================================================
--- head/textproc/scim-table-imengine/pkg-message	(revision 508909)
+++ head/textproc/scim-table-imengine/pkg-message	(revision 508910)
@@ -1,19 +1,23 @@
-------------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 The installation of SCIM table-based im engine has finished. Please note this
 port is only an engine for table-based input methods and does not contain any
 actual input methods.
 
 The following ports can utilize this table-based imengine:
 
  Chinese:
   chinese/scim-tables	Array30, CangJie, Cantonese, Dayi, Erbi, EZ, Jyutping,
                         Simplex, Stroke, Wubi, Ziranma, ZhuYin
  Korean:
   korean/scim-tables	Hangul, Hanja
 
  Japanese:
   japanese/scim-tables	HIRAGANA, KATAKANA, Nippon
 
 As a common rule, set XMODIFIERS to '@im=SCIM' and use `scim -d' to start the
 scim daemon.
-------------------------------------------------------------------------------
+EOM
+}
+]
Index: head/textproc/sdcv/files/pkg-message.in
===================================================================
--- head/textproc/sdcv/files/pkg-message.in	(revision 508909)
+++ head/textproc/sdcv/files/pkg-message.in	(revision 508910)
@@ -1,14 +1,17 @@
-**************************************************************************
+[
+{ type: install
+  message: <<EOM
 sdcv is now installed.
 you have to fetch the dictionaries to make it work correctly.
 
 1. Make directory for dictionaries files :
 
 	# mkdir -p %%PREFIX%%/share/stardict/dic
 
 
 2. Please put your dictionary file at :
 
  	%%PREFIX%%/share/stardict/dic/
-
-**************************************************************************
+EOM
+}
+]
Index: head/textproc/sgmlformat/pkg-message
===================================================================
--- head/textproc/sgmlformat/pkg-message	(revision 508909)
+++ head/textproc/sgmlformat/pkg-message	(revision 508910)
@@ -1,10 +1,14 @@
-*****************************************************************
+[
+{ type: install
+  message: <<EOM
 To avoid any confusion with the versions of these tools that
 might already be installed in your system, after installing this
 package you may wish move or remove:
 
 /usr/bin/sgmlfmt
 /usr/bin/sgmls
 /usr/bin/instant
 /usr/share/sgml/*  (all subdirectories)
-*****************************************************************
+EOM
+}
+]
Index: head/textproc/stardict3/pkg-message
===================================================================
--- head/textproc/stardict3/pkg-message	(revision 508909)
+++ head/textproc/stardict3/pkg-message	(revision 508910)
@@ -1,7 +1,11 @@
-=====================================================================
+[
+{ type: install
+  message: <<EOM
 A set of dictionary ports is available for StarDict:
  chinese/stardict-*
  japanese/stardict-dict-ja
  textproc/stardict-*
  russian/stardict-*
-=====================================================================
+EOM
+}
+]
Index: head/textproc/tth/pkg-message
===================================================================
--- head/textproc/tth/pkg-message	(revision 508909)
+++ head/textproc/tth/pkg-message	(revision 508910)
@@ -1,3 +1,7 @@
-=====================================================================
+[
+{ type: install
+  message: <<EOM
   Please read the license in %%PREFIX%%/share/doc/tth/license.txt.
-=====================================================================
+EOM
+}
+]
Index: head/textproc/unoconv/files/pkg-message.in
===================================================================
--- head/textproc/unoconv/files/pkg-message.in	(revision 508909)
+++ head/textproc/unoconv/files/pkg-message.in	(revision 508910)
@@ -1,11 +1,13 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Universal Office Converter (unoconv) has been installed.
 
 For Document conversions is needed that is LibreOffice or OpenOffice installed
 
 editors/libreoffice
 
 editors/openoffice*
-
-===============================================================================
+EOM
+}
+]
Index: head/textproc/wordnet/files/pkg-message.in
===================================================================
--- head/textproc/wordnet/files/pkg-message.in	(revision 508909)
+++ head/textproc/wordnet/files/pkg-message.in	(revision 508910)
@@ -1,7 +1,11 @@
-
+[
+{ type: install
+  message: <<EOM
 	For the GUI word-browser ``wnb'' to function, Tk-%%TCL_VER%% must
 	be installed. This dependency is not automatic, because there
 	are plenty of uses for WordNet on servers without X11.
 
 	The command-line utility ``wn'', for example, requires only Tcl.
-
+EOM
+}
+]
Index: head/textproc/wv/pkg-message
===================================================================
--- head/textproc/wv/pkg-message	(revision 508909)
+++ head/textproc/wv/pkg-message	(revision 508910)
@@ -1,8 +1,10 @@
-*******************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Some output formats (for example: DVI, PDF, and PS) require a LaTeX
 implementation, such as print/teTeX, to be installed. Text output
 will be of better quality if www/elinks, www/links, or www/lynx is
 installed.
-
-*******************************************************************
+EOM
+}
+]
Index: head/textproc/xml-lite.el/pkg-message
===================================================================
--- head/textproc/xml-lite.el/pkg-message	(revision 508909)
+++ head/textproc/xml-lite.el/pkg-message	(revision 508910)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 To use xml-lite-mode, add to your ~/.emacs the following lines:
 
 (autoload 'xml-lite-mode "xml-lite" "XML-Lite mode" t)
 (add-to-list 'auto-mode-alist '("\\.xml\\'" . xml-lite-mode))
+EOM
+}
+]
Index: head/textproc/xml2rfc/pkg-message
===================================================================
--- head/textproc/xml2rfc/pkg-message	(revision 508909)
+++ head/textproc/xml2rfc/pkg-message	(revision 508910)
@@ -1,3 +1,8 @@
-
+[
+{ type: install
+  message: <<EOM
 	Have a look at http://xml.resource.org/ for how to get and
 	update bibliographic summaries of each RFC and Internet-Draft.
+EOM
+}
+]
Index: head/textproc/xmlcatmgr/files/pkg-message.in
===================================================================
--- head/textproc/xmlcatmgr/files/pkg-message.in	(revision 508909)
+++ head/textproc/xmlcatmgr/files/pkg-message.in	(revision 508910)
@@ -1,21 +1,27 @@
+[
+{ type: install
+  message: <<EOM
 The following catalogs are installed:
 
  1) %%PREFIX%%/share/sgml/catalog
 
    The top level catalog for SGML stuff.  It is not changed
    by any ports/packages except textproc/xmlcatmgr.
 
  2) %%PREFIX%%/share/sgml/catalog.ports
 
    This catalog is for handling SGML stuff installed under
    %%PREFIX%%/share/sgml.  It is changed by ports/packages.
 
  3) %%PREFIX%%/share/xml/catalog
 
    The top level catalog for XML stuff.  It is not changed
    by any ports/packages except textproc/xmlcatmgr.
 
  4) %%PREFIX%%/share/xml/catalog.ports
 
    This catalog is for handling XML stuff installed under
    %%PREFIX%%/share/xml.  It is changed by ports/packages.
+EOM
+}
+]
Index: head/textproc/xmlto/files/pkg-message.in
===================================================================
--- head/textproc/xmlto/files/pkg-message.in	(revision 508909)
+++ head/textproc/xmlto/files/pkg-message.in	(revision 508910)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 For benefits of conversions away from XHTML1 through XSL-FO,
 a stylesheet xhtml2fo.xsl has been installed
 into %%DATADIR%%. Example use:
 
   xmlto pdf -x %%DATADIR%%/xhtml2fo.xsl myXHTML1file.xml
 
 More style sheets for XHTML1 conversions can be found at
 <http://www.antennahouse.com/XSLsample/XSLsample.htm>
 under "Stylesheet for XHTML to XSL-FO transformation"
+EOM
+}
+]
Index: head/textproc/xslide.el/pkg-message
===================================================================
--- head/textproc/xslide.el/pkg-message	(revision 508909)
+++ head/textproc/xslide.el/pkg-message	(revision 508910)
@@ -1,20 +1,24 @@
-****************************************************************************
+[
+{ type: install
+  message: <<EOM
 To use xsl-mode, add to your ~/.emacs the following lines:
 
 ;; XSL mode
 (autoload 'xsl-mode "xslide" "Major mode for XSL stylesheets." t)
 
 ;; Turn on font lock when in XSL mode
 (add-hook 'xsl-mode-hook
 	  'turn-on-font-lock)
 
 (setq auto-mode-alist
       (append
        (list
 	'("\\.fo" . xsl-mode)
 	'("\\.xsl" . xsl-mode))
        auto-mode-alist))
 
 ;; Uncomment if using abbreviations
 ;; (abbrev-mode t)
-****************************************************************************
+EOM
+}
+]
Index: head/textproc/yaml-mode.el/pkg-message
===================================================================
--- head/textproc/yaml-mode.el/pkg-message	(revision 508909)
+++ head/textproc/yaml-mode.el/pkg-message	(revision 508910)
@@ -1,8 +1,11 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 To use yaml-mode, you should add following lines to your .emacs file:
 
 (require 'yaml-mode)
 (add-to-list 'auto-mode-alist '("\\.yaml$" . yaml-mode))
 (add-to-list 'auto-mode-alist '("\\.yml$" . yaml-mode))
-
-**********************************************************************
+EOM
+}
+]
Index: head/ukrainian/emacs-koi8u/pkg-message
===================================================================
--- head/ukrainian/emacs-koi8u/pkg-message	(revision 508909)
+++ head/ukrainian/emacs-koi8u/pkg-message	(revision 508910)
@@ -1,3 +1,7 @@
-*************************************************************
+[
+{ type: install
+  message: <<EOM
 Add (require 'ukr-koi8u) to you ~/.emacs or ~/.xemacs/init.el
-*************************************************************
+EOM
+}
+]
Index: head/ukrainian/monacofonts/pkg-message
===================================================================
--- head/ukrainian/monacofonts/pkg-message	(revision 508909)
+++ head/ukrainian/monacofonts/pkg-message	(revision 508910)
@@ -1,8 +1,12 @@
-
+[
+{ type: install
+  message: <<EOM
 	For  your X-server  to use  the fonts,  you have  to add
 	the  ${LOCALBASE}/share/fonts/koi8-u-monaco (LOCALBASE  is,
 	usually, /usr/local)  to  the server's  font-path.  Use
 	``xset fp+'' ${LOCALBASE} to do this  for the current  X-session and
 	consult  your  X-server's  documentation  to  make  this
 	permanent.
-
+EOM
+}
+]