Index: head/databases/adminer/files/pkg-message.in
===================================================================
--- head/databases/adminer/files/pkg-message.in	(revision 508834)
+++ head/databases/adminer/files/pkg-message.in	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 You should install the database extension(s) what you want to use:
 php%%PHPVER%%-mysqli, php%%PHPVER%%-mssql, php%%PHPVER%%-odbc, php%%PHPVER%%-pgsql or php%%PHPVER%%-pdo_sqlite.
+EOM
+}
+]
Index: head/databases/adodb/files/pkg-message.in
===================================================================
--- head/databases/adodb/files/pkg-message.in	(revision 508834)
+++ head/databases/adodb/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,8 @@
-
+[
+{ type: install
+  message: <<EOM
 You can add the ADOdb path (%%DATADIR%%)
 to the "include_path=" directive in your php.ini
-
+EOM
+}
+]
Index: head/databases/adodb5/files/pkg-message.in
===================================================================
--- head/databases/adodb5/files/pkg-message.in	(revision 508834)
+++ head/databases/adodb5/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 This version supports only PHP version 5 and higher.
 
 You can add the ADOdb path (%%DATADIR%%)
 into the "include_path=" directive in your php.ini
+EOM
+}
+]
Index: head/databases/akonadi/pkg-message
===================================================================
--- head/databases/akonadi/pkg-message	(revision 508834)
+++ head/databases/akonadi/pkg-message	(revision 508835)
@@ -1,12 +1,14 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 KDE Applications versions of Akonadi, KMail, and Kontact use large
 messages on the local machine. The default size on FreeBSD is too
 small, which causes local connection problems, and Akonadi-based
 applications will be flaky (e.g. mailboxes do not display, messages
 cannot be found). Increasing the buffer size is recommended:
 
 	sysctl net.local.stream.recvspace=65536
 	sysctl net.local.stream.sendspace=65536
-
-===============================================================================
+EOM
+}
+]
Index: head/databases/arangodb33/pkg-message
===================================================================
--- head/databases/arangodb33/pkg-message	(revision 508834)
+++ head/databases/arangodb33/pkg-message	(revision 508835)
@@ -1,23 +1,27 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You installed ArangoDB: a distributed NoSQL database.
 
 To enable the service at startup, you should execute the command:
 sysrc arangod_enable="YES"
 
 To start it as a service, you should execute the command:
 # service arangod start
 
 ArangoDB starts with the empty root password.
 
 To change the root password, run 'arangosh' as root, and execute:
 require("@arangodb/users").update("root", "new-secretpassword", true);
 
 ArangoDB has a web interface available at:
 http://localhost:8529
 
 The web interface allows you to add users, create databases, manipulate
 data.
 
 ArangoDB uses the AQL language to query and modify data, as opposed to
 the SQL language used by relational databases.
-======================================================================
+EOM
+}
+]
Index: head/databases/ateam_mysql_ldap_auth/files/pkg-message.in
===================================================================
--- head/databases/ateam_mysql_ldap_auth/files/pkg-message.in	(revision 508834)
+++ head/databases/ateam_mysql_ldap_auth/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,8 @@
----------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 Please see %%DOCSDIR%%/INSTALL
 for install notes.
----------------------------------------------------------------------
+EOM
+}
+]

Property changes on: head/databases/ateam_mysql_ldap_auth/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/databases/bbdb/pkg-message
===================================================================
--- head/databases/bbdb/pkg-message	(revision 508834)
+++ head/databases/bbdb/pkg-message	(revision 508835)
@@ -1,14 +1,18 @@
-########################################################################
+[
+{ type: install
+  message: <<EOM
 Add this line to your Emacs initialization.
 
 (require 'bbdb-loaddefs)
 
 Depending on which mail user agent and other miscellaneous packages you
 use, you may also want to add something similar to these lines.
 
 (bbdb-initialize 'gnus 'message)
 (bbdb-mua-auto-update-init 'gnus 'message)
 
 Refer to Emacs' help for these two functions, bbdb-initialize and
 bbdb-mua-auto-update-init, for details.
-########################################################################
+EOM
+}
+]
Index: head/databases/cassandra3/pkg-message
===================================================================
--- head/databases/cassandra3/pkg-message	(revision 508834)
+++ head/databases/cassandra3/pkg-message	(revision 508835)
@@ -1,8 +1,12 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 Entries for this machine's hostname may need to be set in /etc/hosts
 if you get a "Local host name unknown" exception on startup
 (see https://issues.apache.org/jira/browse/CASSANDRA-2380):
 
 	::1		localhost localhost.your.domain your-host-name
 	127.0.0.1	localhost localhost.your.domain your-host-name
-======================================================================
+EOM
+}
+]
Index: head/databases/couchdb/files/pkg-message.in
===================================================================
--- head/databases/couchdb/files/pkg-message.in	(revision 508834)
+++ head/databases/couchdb/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 ADMIN ACCOUNT
 By default no admin password or account is configured which leaves the DB
 server open.  Add accounts to the bottom of %%PREFIX%%/etc/couchdb/local.ini
 to secure your installation (by default CouchDB listens on localhost only).
+EOM
+}
+]
Index: head/databases/couchdb2/files/pkg-message.in
===================================================================
--- head/databases/couchdb2/files/pkg-message.in	(revision 508834)
+++ head/databases/couchdb2/files/pkg-message.in	(revision 508835)
@@ -1,33 +1,37 @@
-***********************************************************
+[
+{ type: install
+  message: <<EOM
 If this is the first time you are installing %%PORTNAME%%, you will need
 to add a default administrator, and initialise the database node.
 
 For a single node setup, append an inital administrator username and
 password to the [admins] section of your local.ini, and a [log] section:
 
 [admins]
 admin = passwd
 [log]
 # http://docs.couchdb.org/en/latest/config/logging.html
 level = err
 include_sasl = true
 writer = syslog
 syslog_host = localhost
 
 Amend %%ETCDIR%%/vm.args as required, at least altering the cookie.
 
 Then, start Apache CouchDB, and run the following commands once the
 database is started for the first time, amending admin:passwd to match
 your choice above to initialise the default databases:
 
 sudo service %%PORTNAME%% start
 
 curl -X PUT http://admin:passwd@127.0.0.1:5984/_users
 curl -X PUT http://admin:passwd@127.0.0.1:5984/_replicator
 curl -X PUT http://admin:passwd@127.0.0.1:5984/_global_changes
 
 Then use the admin interface at http://127.0.0.1:5984/_utils/# as usual.
 
 For more information see
 http://docs.couchdb.org/en/latest/install/setup.html
-***********************************************************
+EOM
+}
+]
Index: head/databases/firebird25-server/files/pkg-message.in
===================================================================
--- head/databases/firebird25-server/files/pkg-message.in	(revision 508834)
+++ head/databases/firebird25-server/files/pkg-message.in	(revision 508835)
@@ -1,51 +1,53 @@
-###############################################################################
-
+[
+{ type: install
+  message: <<EOM
 Firebird was installed.
 
 1) Support for Super Server has been added
 
 2) Before start the server ensure that the following line exists in /etc/services:
 
 gds_db		3050/tcp  #InterBase Database Remote Protocol
 
 3) If you use inetd (Classic Server) then add the following line to /etc/inetd.conf
 
 gds_db	stream	tcp	nowait	firebird	%%PREFIX%%/sbin/fb_inet_server  fb_inet_server
 
 And finally restart inetd.
 
 4) If you want to use SuperClassic Server then you must add the following lines
    to /etc/rc.conf file.
 
  firebird_enable="YES"
  firebird_mode="superclassic"
 
 5) If you want to use Super Server then you must add the following lines to
    /etc/rc.conf file.
 
  firebird_enable="YES"
  firebird_mode="superserver"
 
  Note: Keep in mind that you only can add one of them but never both modes on
        the same time
 
 6) It is STRONGLY recommended that you change the SYSDBA
 password with:
 
  # gsec -user SYSDBA -pass masterkey
  GSEC> modify SYSDBA -pw newpassword
  GSEC> quit
 
 before doing anything serious with Firebird.
 
 7) See documentation in %%DOCSDIR%%/ for more information.
 
 8) Some firebird tools were renamed for avoid conflicts with some other ports
 
 	%%PREFIX%%/bin/isql	-> 	%%PREFIX%%/bin/isql-fb
 	%%PREFIX%%/bin/gstat	->	%%PREFIX%%/bin/fbstat
 	%%PREFIX%%/bin/gsplit	->	%%PREFIX%%/bin/fbsplit
 
 9) Enjoy it ;)
-
-################################################################################
+EOM
+}
+]
Index: head/databases/freetds-devel/files/pkg-message.in
===================================================================
--- head/databases/freetds-devel/files/pkg-message.in	(revision 508834)
+++ head/databases/freetds-devel/files/pkg-message.in	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 Sample configuration files have been installed in %%PREFIX%%/etc.
 You should edit them and remove the .dist-suffix from their names.
+EOM
+}
+]
Index: head/databases/frontbase-jdbc/files/pkg-message.in
===================================================================
--- head/databases/frontbase-jdbc/files/pkg-message.in	(revision 508834)
+++ head/databases/frontbase-jdbc/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,11 @@
-
+[
+{ type: install
+  message: <<EOM
 FrontBase JDBC support installed!
 
 frontbasejdbc.jar resides in
 %%JAVAJARDIR%%/frontbasejdbc.jar
 Add this to your CLASSPATH!
-
+EOM
+}
+]
Index: head/databases/galera/pkg-message
===================================================================
--- head/databases/galera/pkg-message	(revision 508834)
+++ head/databases/galera/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Find the Galera Cluster documentation at
 http://galeracluster.com/documentation-webpages/
-
-======================================================================
+EOM
+}
+]
Index: head/databases/geoserver-mysql-plugin/files/pkg-message.in
===================================================================
--- head/databases/geoserver-mysql-plugin/files/pkg-message.in	(revision 508834)
+++ head/databases/geoserver-mysql-plugin/files/pkg-message.in	(revision 508835)
@@ -1,9 +1,10 @@
-
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 A MySQL DataStore implementation was installed, please restart GeoServer.
 
 MySQL should now show up as an option in the GeoServer web admin tool at
 Config -> Data -> DataStores -> New.  Fill out the appropriate params.
-
-===============================================================================
+EOM
+}
+]
Index: head/databases/gnats4/pkg-message
===================================================================
--- head/databases/gnats4/pkg-message	(revision 508834)
+++ head/databases/gnats4/pkg-message	(revision 508835)
@@ -1,24 +1,26 @@
-************************************************************
-
+[
+{ type: install
+  message: <<EOM
 GNATS has been successfully installed.
 
 If you want to run the GNATS server, enter
 
   %%PREFIX%%/libexec/gnats/mkdb default
 
 to create the default database and add
 
   support	stream	tcp	nowait	gnats	%%PREFIX%%/libexec/gnats/gnatsd	gnatsd
 
 to inetd.conf(5). Instructions to upgrade from a
 GNATS 3.x database are in
 
   %%PREFIX%%/share/doc/gnats/UPGRADING
 
 Try `man gnats', `info gnats' and the online manual at
 
   http://www.gnu.org/software/gnats/gnats_toc.html
 
 for more information.
-
-************************************************************
+EOM
+}
+]
Index: head/databases/grass7/pkg-message
===================================================================
--- head/databases/grass7/pkg-message	(revision 508834)
+++ head/databases/grass7/pkg-message	(revision 508835)
@@ -1,16 +1,22 @@
+[
+{ type: install
+  message: <<EOM
 To run the wxpython based GUI:
 
     export GRASS_PYTHON=python2.7 (or your local python version)
     grass -gui
 
 To map gcc for numpy, add:
 
     libgcc_s.so.1   gcc6/libgcc_s.so.1
     libgomp.so.1    gcc6/libgomp.so.1
     libssp.so.0     gcc6/libssp.so.0
     libstdc++.so.6  gcc6/libstdc++.so.6
 
 to %%LOCALBASE%%/etc/libmap.d/gcc.conf. Use your local gcc version
 instead of gcc6.
 
 This is required for some modules using fortran.
+EOM
+}
+]
Index: head/databases/hbase/files/pkg-message.in
===================================================================
--- head/databases/hbase/files/pkg-message.in	(revision 508834)
+++ head/databases/hbase/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,8 @@
-********************************************************************************
-*           HBase binaries are installed in %%PREFIX%%/hbase/bin/              *
-*           Consider adding this directory to your $PATH.                      *
-********************************************************************************
+[
+{ type: install
+  message: <<EOM
+HBase binaries are installed in %%PREFIX%%/hbase/bin/
+Consider adding this directory to your $PATH.
+EOM
+}
+]
Index: head/databases/iplike/files/pkg-message.in
===================================================================
--- head/databases/iplike/files/pkg-message.in	(revision 508834)
+++ head/databases/iplike/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,11 @@
-| Don't forget to run %%PREFIX%%/sbin/install_iplike.sh to make the relevant
-| changes to your OpenNMS database.
-| To confirm the changes have been made run:
-| psql -U opennms -h localhost -c '\df+ iplike' | head
-| Check the Language column, It should say "c" and not "plpgsql"
+[
+{ type: install
+  message: <<EOM
+Don't forget to run %%PREFIX%%/sbin/install_iplike.sh to make the relevant
+changes to your OpenNMS database.
+To confirm the changes have been made run:
+psql -U opennms -h localhost -c '\df+ iplike' | head
+Check the Language column, It should say "c" and not "plpgsql"
+EOM
+}
+]
Index: head/databases/isql-viewer/pkg-message
===================================================================
--- head/databases/isql-viewer/pkg-message	(revision 508834)
+++ head/databases/isql-viewer/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-=============================================================================
+[
+{ type: install
+  message: <<EOM
 This port of iSQL-Viewer is configured to automatically detect and use
 the installed JDBC drivers for MySQL and PostgreSQL.
 
 You can add additional JDBC drivers (and dependent JAR files) on a per
 service basis in the tabbed dialog "Resources" which resides inside the
 "Service Manager" dialog.
 
 However, please note that adding JAR files or directories in the preferences
 dialog doesn't have the desired effect in this version.
-=============================================================================
+EOM
+}
+]
Index: head/databases/mariadb101-client/files/pkg-message.in
===================================================================
--- head/databases/mariadb101-client/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb101-client/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb101-server/files/pkg-message.in
===================================================================
--- head/databases/mariadb101-server/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb101-server/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,17 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
 the first time you start the MySQL server after an upgrade from an
 earlier version.
 
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb102-client/files/pkg-message.in
===================================================================
--- head/databases/mariadb102-client/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb102-client/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb102-server/files/pkg-message.in
===================================================================
--- head/databases/mariadb102-server/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb102-server/files/pkg-message.in	(revision 508835)
@@ -1,22 +1,23 @@
-************************************************************************
+[
+{ type: install
+  message: <<EOM
+The default InnoDB storage engine is no longer XtraDB, check your
+configuration and switch it to InnoDB
 
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-!!                                                                    !!
-!! The default InnoDB storage engine is no longer XtraDB, check your  !!
-!! configuration and switch it to InnoDB                              !!
-!!                                                                    !!
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
-the first time you start the MySQL server after an upgrade from an
-earlier version.
-
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
-
-************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
+the first time you start the MySQL server after an upgrade from an
+earlier version.
+EOM
+}
+]
Index: head/databases/mariadb103-client/files/pkg-message.in
===================================================================
--- head/databases/mariadb103-client/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb103-client/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb103-server/files/pkg-message.in
===================================================================
--- head/databases/mariadb103-server/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb103-server/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,20 @@
-************************************************************************
-
-Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
-the first time you start the MySQL server after an upgrade from an
-earlier version.
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
-
-************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
+the first time you start the MySQL server after an upgrade from an
+earlier version.
+EOM
+}
+]
Index: head/databases/mariadb104-client/files/pkg-message.in
===================================================================
--- head/databases/mariadb104-client/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb104-client/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb104-server/files/pkg-message.in
===================================================================
--- head/databases/mariadb104-server/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb104-server/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,20 @@
-************************************************************************
-
-Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
-the first time you start the MySQL server after an upgrade from an
-earlier version.
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
-
-************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
+the first time you start the MySQL server after an upgrade from an
+earlier version.
+EOM
+}
+]
Index: head/databases/mariadb55-client/files/pkg-message.in
===================================================================
--- head/databases/mariadb55-client/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb55-client/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mariadb55-server/files/pkg-message.in
===================================================================
--- head/databases/mariadb55-server/files/pkg-message.in	(revision 508834)
+++ head/databases/mariadb55-server/files/pkg-message.in	(revision 508835)
@@ -1,11 +1,16 @@
-************************************************************************
-
-Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
-the first time you start the MySQL server after an upgrade from an
-earlier version.
-
+[
+{ type: install
+  message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc and %%PREFIX%%/etc/mysql.
-
-************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
+the first time you start the MySQL server after an upgrade from an
+earlier version.
+EOM
+}
+]
Index: head/databases/mroonga/files/pkg-message.in
===================================================================
--- head/databases/mroonga/files/pkg-message.in	(revision 508834)
+++ head/databases/mroonga/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,9 @@
-##########################################################
-# Run SQLs to register Mroonga engine to MySQL.          #
-#                                                        #
-# % mysql -u root < %%DATADIR%%/install.sql #
-##########################################################
+[
+{ type: install
+  message: <<EOM
+Run SQLs to register Mroonga engine to MySQL.
+
+% mysql -u root < %%DATADIR%%/install.sql
+EOM
+}
+]
Index: head/databases/mysql-udf/pkg-message
===================================================================
--- head/databases/mysql-udf/pkg-message	(revision 508834)
+++ head/databases/mysql-udf/pkg-message	(revision 508835)
@@ -1,25 +1,31 @@
+[
+{ type: install
+  message: <<EOM
 To add the custom functions to your MySQL server use the following syntax:
 (you may install only the functions you need):
 
 CREATE AGGREGATE FUNCTION median RETURNS REAL SONAME 'udf_median.so';
 CREATE AGGREGATE FUNCTION correlation RETURNS REAL SONAME 'udf_correlation.so';
 CREATE AGGREGATE FUNCTION intercept RETURNS REAL SONAME 'udf_intercept.so';
 CREATE AGGREGATE FUNCTION slope RETURNS REAL SONAME 'udf_slope.so';
 CREATE AGGREGATE FUNCTION skewness RETURNS REAL SONAME 'udf_skewness.so';
 CREATE AGGREGATE FUNCTION kurtosis RETURNS REAL SONAME 'udf_kurtosis.so';
 CREATE FUNCTION confidence_higher RETURNS REAL SONAME 'udf_confidence_higher.so';
 CREATE FUNCTION confidence_lower RETURNS REAL SONAME 'udf_confidence_lower.so';
 CREATE FUNCTION stdnorm_density RETURNS REAL SONAME 'udf_stdnorm_density.so';
 CREATE FUNCTION stdnorm_dist RETURNS REAL SONAME 'udf_stdnorm_dist.so';
 CREATE AGGREGATE FUNCTION geomean RETURNS REAL SONAME 'udf_geomean.so';
 CREATE AGGREGATE FUNCTION weightedavg RETURNS REAL SONAME 'udf_weightedavg.so';
 CREATE FUNCTION noverm RETURNS INTEGER SONAME 'udf_noverm.so';
 CREATE FUNCTION faculty RETURNS REAL SONAME 'udf_faculty.so';
 CREATE AGGREGATE FUNCTION COLWIDTH RETURNS INTEGER SONAME 'udf_colwidth.so';
 CREATE AGGREGATE FUNCTION LONGEST RETURNS STRING SONAME 'udf_longest.so';
 
 Example for deinstalling a function:
 DROP FUNCTION median;
 
 For function descriptions, see the following webpage:
 http://mysql-udf.sourceforge.net/
+EOM
+}
+]
Index: head/databases/mysql55-client/pkg-message
===================================================================
--- head/databases/mysql55-client/pkg-message	(revision 508834)
+++ head/databases/mysql55-client/pkg-message	(revision 508835)
@@ -1,15 +1,17 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 Please be aware the database client is vulnerable
 to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM".
 You may find more information at the following URL:
 
 http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html
 
 Although this database client is not listed as
 "affected", it is vulnerable and will not be
 receiving a patch. Please take note of this when
 deploying this software.
 
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+EOM
+}
+]
Index: head/databases/mysql55-server/pkg-message
===================================================================
--- head/databases/mysql55-server/pkg-message	(revision 508834)
+++ head/databases/mysql55-server/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-************************************************************************
-
+[
+{ type: upgrade
+  message: <<EOM
 Remember to run mysql_upgrade the first time you start the MySQL server
 after an upgrade from an earlier version.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mysql56-client/pkg-message
===================================================================
--- head/databases/mysql56-client/pkg-message	(revision 508834)
+++ head/databases/mysql56-client/pkg-message	(revision 508835)
@@ -1,14 +1,16 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 Please be aware the database client is vulnerable
 to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM".
 You may find more information at the following URL:
 
 http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html
 
 Although this database client is not listed as
 "affected", it is vulnerable and will not be
 receiving a patch. Please take note of this when
 deploying this software.
-
-* * * * * * * * * * * * * * * * * * * * * * * *
+EOM
+}
+]
Index: head/databases/mysql56-server/pkg-message
===================================================================
--- head/databases/mysql56-server/pkg-message	(revision 508834)
+++ head/databases/mysql56-server/pkg-message	(revision 508835)
@@ -1,15 +1,16 @@
-*****************************************************************************
-
-Remember to run mysql_upgrade the first time you start the MySQL server
-after an upgrade from an earlier version.
-
-*****************************************************************************
-
-*****************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Please keep in mind that the default location for my.cnf will be changed
 from "/var/db/mysql/my.cnf" to "/usr/local/etc/mysql/my.cnf" in the near
 future.  If you do not want to move your my.cnf to the new location then
 you must set "mysql_optfile" in /etc/rc.conf to "/var/db/mysql/my.cnf".
-
-*****************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade the first time you start the MySQL server
+after an upgrade from an earlier version.
+EOM
+}
+]
Index: head/databases/mysql57-client/pkg-message
===================================================================
--- head/databases/mysql57-client/pkg-message	(revision 508834)
+++ head/databases/mysql57-client/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 This is the mysql CLIENT without the server.
 for complete server and client, please install databases/mysql57-server
-
-* * * * * * * * * * * * * * * * * * * * * * * *
+EOM
+}
+]
Index: head/databases/mysql57-server/pkg-message
===================================================================
--- head/databases/mysql57-server/pkg-message	(revision 508834)
+++ head/databases/mysql57-server/pkg-message	(revision 508835)
@@ -1,14 +1,19 @@
-*****************************************************************************
-
-Remember to run mysql_upgrade the first time you start the MySQL server
-after an upgrade from an earlier version.
-
+[
+{ type: install
+  message: <<EOM
 Initial password for first time use of MySQL is saved in $HOME/.mysql_secret
 ie. when you want to use "mysql -u root -p" first you should see password
 in /root/.mysql_secret
 
 MySQL57 has a default %%ETCDIR%%/my.cnf,
 remember to replace it wit your own
 or set `mysql_optfile="$YOUR_CNF_FILE` in rc.conf.
-
-*****************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade the first time you start the MySQL server
+after an upgrade from an earlier version.
+EOM
+}
+]
Index: head/databases/mysql80-client/pkg-message
===================================================================
--- head/databases/mysql80-client/pkg-message	(revision 508834)
+++ head/databases/mysql80-client/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 This is the mysql CLIENT without the server.
 for complete server and client, please install databases/mysql80-server
-
-* * * * * * * * * * * * * * * * * * * * * * * *
+EOM
+}
+]
Index: head/databases/mysql80-server/pkg-message
===================================================================
--- head/databases/mysql80-server/pkg-message	(revision 508834)
+++ head/databases/mysql80-server/pkg-message	(revision 508835)
@@ -1,13 +1,18 @@
-*****************************************************************************
-
-Remember to run mysql_upgrade the first time you start the MySQL server
-after an upgrade from an earlier version.
-
+[
+{ type: install
+  message: <<EOM
 There is no initial password for first time use of MySQL.
 Keep in mind to reset it to a secure password.
 
 MySQL80 has a default %%ETCDIR%%/my.cnf,
 remember to replace it with your own
 or set `mysql_optfile="$YOUR_CNF_FILE` in rc.conf.
-
-*****************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade the first time you start the MySQL server
+after an upgrade from an earlier version.
+EOM
+}
+]
Index: head/databases/mysqlwsrep56-server/pkg-message
===================================================================
--- head/databases/mysqlwsrep56-server/pkg-message	(revision 508834)
+++ head/databases/mysqlwsrep56-server/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-************************************************************************
-
+[
+{ type: upgrade
+  message: <<EOM
 Remember to run mysql_upgrade the first time you start the MySQL server
 after an upgrade from an earlier version.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/mysqlwsrep57-server/pkg-message
===================================================================
--- head/databases/mysqlwsrep57-server/pkg-message	(revision 508834)
+++ head/databases/mysqlwsrep57-server/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-************************************************************************
-
+[
+{ type: upgrade
+  message: <<EOM
 Remember to run mysql_upgrade the first time you start the MySQL server
 after an upgrade from an earlier version.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/percona-pam-for-mysql/pkg-message
===================================================================
--- head/databases/percona-pam-for-mysql/pkg-message	(revision 508834)
+++ head/databases/percona-pam-for-mysql/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 Documentation for using percona-pam-for-mysql authentication plugin can
 be found at:
 
 https://www.percona.com/doc/percona-pam-for-mysql/index.html
 
 Please note that you need this plugin installed on both the client and
 server for authentication to be successful.
+EOM
+}
+]
Index: head/databases/percona55-client/pkg-message
===================================================================
--- head/databases/percona55-client/pkg-message	(revision 508834)
+++ head/databases/percona55-client/pkg-message	(revision 508835)
@@ -1,15 +1,16 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 Please be aware the database client is vulnerable
 to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM".
 You may find more information at the following URL:
 
 http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html
 
 Although this database client is not listed as
 "affected", it is vulnerable and will not be
 receiving a patch. Please take note of this when
 deploying this software.
-
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+EOM
+}
+]
Index: head/databases/percona55-server/pkg-message
===================================================================
--- head/databases/percona55-server/pkg-message	(revision 508834)
+++ head/databases/percona55-server/pkg-message	(revision 508835)
@@ -1,7 +1,9 @@
-************************************************************************
-
+[
+{ type: upgrade
+  message: <<EOM
 Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag)
 the first time you start the MySQL server after an upgrade from an
 earlier version.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/percona56-client/pkg-message
===================================================================
--- head/databases/percona56-client/pkg-message	(revision 508834)
+++ head/databases/percona56-client/pkg-message	(revision 508835)
@@ -1,15 +1,16 @@
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+[
+{ type: install
+  message: <<EOM
 Please be aware the database client is vulnerable
 to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM".
 You may find more information at the following URL:
 
 http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html
 
 Although this database client is not listed as
 "affected", it is vulnerable and will not be
 receiving a patch. Please take note of this when
 deploying this software.
-
-* * * * * * * * * * * * * * * * * * * * * * * *
-
+EOM
+}
+]
Index: head/databases/percona56-server/pkg-message
===================================================================
--- head/databases/percona56-server/pkg-message	(revision 508834)
+++ head/databases/percona56-server/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-************************************************************************
-
+[
+{ type: upgrade
+  message: <<EOM
 Remember to run mysql_upgrade the first time you start the MySQL server
 after an upgrade from an earlier version.
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/percona57-pam-for-mysql/pkg-message
===================================================================
--- head/databases/percona57-pam-for-mysql/pkg-message	(revision 508834)
+++ head/databases/percona57-pam-for-mysql/pkg-message	(revision 508835)
@@ -1,10 +1,16 @@
+[
+{ type: install
+  message: <<EOM
 Documentation for using percona-pam-for-mysql authentication plugin can
 be found at:
 
 https://www.percona.com/doc/percona-pam-for-mysql/index.html
 
 Please note that you need this plugin installed on both the client and
 server for authentication to be successful.
 
 This version of the plugin is compatible with the new auth plugin API
 introduced in MySQL 5.7.
+EOM
+}
+]
Index: head/databases/percona57-server/pkg-message
===================================================================
--- head/databases/percona57-server/pkg-message	(revision 508834)
+++ head/databases/percona57-server/pkg-message	(revision 508835)
@@ -1,10 +1,15 @@
-************************************************************************
-
-Remember to run mysql_upgrade the first time you start the MySQL server
-after an upgrade from an earlier version.
-
+[
+{ type: install
+  message: <<EOM
 Initial password for first time use of MySQL is saved in $HOME/.mysql_secret
 ie. when you want to use "mysql -u root -p" first you should see password
 in /root/.mysql_secret
-
-************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+Remember to run mysql_upgrade the first time you start the MySQL server
+after an upgrade from an earlier version.
+EOM
+}
+]
Index: head/databases/pg_qualstats/pkg-message
===================================================================
--- head/databases/pg_qualstats/pkg-message	(revision 508834)
+++ head/databases/pg_qualstats/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 To activate pg_qualstats on your PostgreSQL server, add 'pg_qualstats' to
 shared_preload_libraries in $PGDATA/postgresql.conf. For every database,
 run
 	CREATE EXTENSION IF NOT EXISTS pg_qualstats.
 
 Using databases/powa-web and databases/powa-archivist together with
 pg_qualstats is warmly recommended.
+EOM
+}
+]
Index: head/databases/pg_stat_kcache/pkg-message
===================================================================
--- head/databases/pg_stat_kcache/pkg-message	(revision 508834)
+++ head/databases/pg_stat_kcache/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 To activate pg_stat_kcache on your PostgreSQL server, add 'pg_stat_kcache' to
 shared_preload_libraries in $PGDATA/postgresql.conf. For every database,
 run
 	CREATE EXTENSION IF NOT EXISTS pg_stat_kcache
 
 Using databases/powa-web and databases/powa-archivist together with
 pg_stat_kcache is warmly recommended.
+EOM
+}
+]
Index: head/databases/pgbouncer/files/pkg-message.in
===================================================================
--- head/databases/pgbouncer/files/pkg-message.in	(revision 508834)
+++ head/databases/pgbouncer/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,15 @@
-
-===>  CONFIGURATION NOTE:
-
+[
+{ type: install
+  message: <<EOM
       To setup pgbouncer you need to edit the configuration file:
       %%PREFIX%%/etc/pgbouncer.ini
 
       You will also need to define the list of allowed users as
       per the pgbouncer(5) man page. See the sample file:
       %%PREFIX%%/etc/pgbouncer.users.sample
 
       To run pgbouncer from startup, add pgbouncer_enable="YES"
       in your /etc/rc.conf.
+EOM
+}
+]
Index: head/databases/pgpool/pkg-message
===================================================================
--- head/databases/pgpool/pkg-message	(revision 508834)
+++ head/databases/pgpool/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 In order to start pgpool you need some more configuration:
 
 # sysrc -f /etc/rc.conf pgpool_enable="YES"
 # sysrc -f /etc/rc.conf pgpool_user="root"
 
 Please consider the usage of another user. The user is
 required to have read/write access to /var/run/pgpool.
 
 Using the root user is - as always - an security issue.
+EOM
+}
+]
Index: head/databases/pgpool-II-35/pkg-message
===================================================================
--- head/databases/pgpool-II-35/pkg-message	(revision 508834)
+++ head/databases/pgpool-II-35/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 In order to start pgpool you need some more configuration:
 
 # sysrc -f /etc/rc.conf pgpool_enable="YES"
 # sysrc -f /etc/rc.conf pgpool_user="root"
 
 Please consider the usage of another user. The user is
 required to have read/write access to /var/run/pgpool.
 
 Using the root user is - as always - an security issue.
+EOM
+}
+]
Index: head/databases/pgpool-II-36/pkg-message
===================================================================
--- head/databases/pgpool-II-36/pkg-message	(revision 508834)
+++ head/databases/pgpool-II-36/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 In order to start pgpool you need some more configuration:
 
 # sysrc -f /etc/rc.conf pgpool_enable="YES"
 # sysrc -f /etc/rc.conf pgpool_user="root"
 
 Please consider the usage of another user. The user is
 required to have read/write access to /var/run/pgpool.
 
 Using the root user is - as always - an security issue.
+EOM
+}
+]
Index: head/databases/pgpool-II-37/pkg-message
===================================================================
--- head/databases/pgpool-II-37/pkg-message	(revision 508834)
+++ head/databases/pgpool-II-37/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 In order to start pgpool you need some more configuration:
 
 # sysrc -f /etc/rc.conf pgpool_enable="YES"
 # sysrc -f /etc/rc.conf pgpool_user="root"
 
 Please consider the usage of another user. The user is
 required to have read/write access to /var/run/pgpool.
 
 Using the root user is - as always - an security issue.
+EOM
+}
+]
Index: head/databases/pgpool-II-40/pkg-message
===================================================================
--- head/databases/pgpool-II-40/pkg-message	(revision 508834)
+++ head/databases/pgpool-II-40/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 In order to start pgpool you need some more configuration:
 
 # sysrc -f /etc/rc.conf pgpool_enable="YES"
 # sysrc -f /etc/rc.conf pgpool_user="root"
 
 Please consider the usage of another user. The user is
 required to have read/write access to /var/run/pgpool.
 
 Using the root user is - as always - an security issue.
+EOM
+}
+]
Index: head/databases/pgroonga/files/pkg-message.in
===================================================================
--- head/databases/pgroonga/files/pkg-message.in	(revision 508834)
+++ head/databases/pgroonga/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,15 @@
-######################################################################################
-# Create a database:                                                                 #
-# ==================                                                                 #
-# % sudo -H -u postgres psql --command 'CREATE DATABASE pgroonga_test'               #
-# (Normally, you should create a user for pgroonga_test database and use the user.   #
-# See GRANT USAGE ON SCHEMA pgroonga for details.)                                   #
-#                                                                                    #
-# Connect to the created database and execute CREATE EXTENSION pgroonga:             #
-# ======================================================================             #
-# % sudo -H -u postgres psql -d pgroonga_test --command 'CREATE EXTENSION pgroonga;' #
-#                                                                                    #
-######################################################################################
+[
+{ type: install
+  message: <<EOM
+Create a database:
+==================
+% sudo -H -u postgres psql --command 'CREATE DATABASE pgroonga_test'
+(Normally, you should create a user for pgroonga_test database and use the user.
+See GRANT USAGE ON SCHEMA pgroonga for details.)
+
+Connect to the created database and execute CREATE EXTENSION pgroonga:
+======================================================================
+% sudo -H -u postgres psql -d pgroonga_test --command 'CREATE EXTENSION pgroonga;'
+EOM
+}
+]
Index: head/databases/pguri/pkg-message
===================================================================
--- head/databases/pguri/pkg-message	(revision 508834)
+++ head/databases/pguri/pkg-message	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 In order to use the extension within database execute the following command:
 
 CREATE EXTENSION uri;
+EOM
+}
+]
Index: head/databases/phpliteadmin/files/pkg-message.in
===================================================================
--- head/databases/phpliteadmin/files/pkg-message.in	(revision 508834)
+++ head/databases/phpliteadmin/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,12 @@
-
+[
+{ type: install
+  message: <<EOM
 phpliteadmin has been installed into:
 
     %%WWWDIR%%
 
 Please copy phpliteadmin.config.sample.php to phpliteadmin.config.php and
  edit as you needs.
+EOM
+}
+]
Index: head/databases/phpmyadmin/files/pkg-message.in
===================================================================
--- head/databases/phpmyadmin/files/pkg-message.in	(revision 508834)
+++ head/databases/phpmyadmin/files/pkg-message.in	(revision 508835)
@@ -1,43 +1,48 @@
-
+[
+{ type: install
+  message: <<EOM
 %%PKGNAME%% has been installed into:
 
     %%WWWDIR%%
 
 Please edit config.inc.php to suit your needs.
 
 To make phpMyAdmin available through your web site, I suggest
 that you add something like the following to httpd.conf:
 
 For Apache versions earlier than 2.4:
 
     Alias /phpmyadmin/ "%%WWWDIR%%/"
 
     <Directory "%%WWWDIR%%/">
 	Options none
 	AllowOverride Limit
 
 	Order Deny,Allow
 	Deny from all
 	Allow from 127.0.0.1 .example.com
     </Directory>
 
 For Apache version 2.4.x or above:
 
     Alias /phpmyadmin/ "%%WWWDIR%%/"
 
     <Directory "%%WWWDIR%%/">
 	Options None
 	AllowOverride Limit
 
 	Require local
     	Require host .example.com
     </Directory>
 
 SECURITY NOTE: phpMyAdmin is an administrative tool that has had several
 remote vulnerabilities discovered in the past, some allowing remote
 attackers to execute arbitrary code with the web server's user credential.
 All known problems have been fixed, but the FreeBSD Security Team strongly
 advises that any instance be protected with an additional protection layer,
 e.g. a different access control mechanism implemented by the web server
 as shown in the example.  Do consider enabling phpMyAdmin only when it
 is in use.
+EOM
+}
+]
Index: head/databases/postgresql-cstore_fdw/files/pkg-message.in
===================================================================
--- head/databases/postgresql-cstore_fdw/files/pkg-message.in	(revision 508834)
+++ head/databases/postgresql-cstore_fdw/files/pkg-message.in	(revision 508835)
@@ -1,14 +1,17 @@
-****************************************************************************
-
+[
+{ type: upgrade
+  maximum_version: 1.6
+  message: <<EOM
 If you are upgrading cstore_fdw from a version prior to 1.6, you need 
 to execute the following steps:
 
   - Restart the PostgreSQL server;
 
   - Run ALTER EXTENSION cstore_fdw UPDATE;
 
 Please, visit the following URL for more information:
 
 https://github.com/citusdata/cstore_fdw/blob/master/README.md
-
-***************************************************************************
+EOM
+}
+]
Index: head/databases/postgresql-jdbc/files/pkg-message.in
===================================================================
--- head/databases/postgresql-jdbc/files/pkg-message.in	(revision 508834)
+++ head/databases/postgresql-jdbc/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 PostgreSQL JDBC support installed!
 
 postgresql.jar resides in
 %%JAVAJARDIR%%/postgresql.jar
 Add this to your CLASSPATH!
+EOM
+}
+]
Index: head/databases/postgresql-plv8js/pkg-message
===================================================================
--- head/databases/postgresql-plv8js/pkg-message	(revision 508834)
+++ head/databases/postgresql-plv8js/pkg-message	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 Use the following sql script to create PL/v8js
 
 	psql -c 'CREATE EXTENSION plv8'
 	psql -c 'CREATE EXTENSION plls'
 	psql -c 'CREATE EXTENSION plcoffee'
+EOM
+}
+]
Index: head/databases/postgresql-relay/pkg-message
===================================================================
--- head/databases/postgresql-relay/pkg-message	(revision 508834)
+++ head/databases/postgresql-relay/pkg-message	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 Databases/postgresql-relay now supports rc.subr.
 Please add 'postgresqlrelay_enable="YES"' to your /etc/rc.conf
 to make it start autoamtically at startup.
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk 
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql10-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql10-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql10-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk 
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql11-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql11-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql11-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk 
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql12-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql12-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql12-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql94-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql94-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql94-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql95-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql95-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql95-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-client.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-client.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-client.in	(revision 508835)
@@ -1,32 +1,38 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL port has a collection of "side orders":
 
 postgresql-docs
   For all of the html documentation
 
 p5-Pg
   A perl5 API for client access to PostgreSQL databases.
 
 postgresql-tcltk 
   If you want tcl/tk client support.
 
 postgresql-jdbc
   For Java JDBC support.
 
 postgresql-odbc
   For client access from unix applications using ODBC as access
   method. Not needed to access unix PostgreSQL servers from Win32
   using ODBC. See below.
 
 ruby-postgres, py-psycopg2
   For client access to PostgreSQL databases using the ruby & python
   languages.
 
 postgresql-plperl, postgresql-pltcl & postgresql-plruby
   For using perl5, tcl & ruby as procedural languages.
 
 postgresql-contrib
   Lots of contributed utilities, postgresql functions and
   datatypes. There you find pg_standby, pgcrypto and many other cool
   things.
 
 etc...
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-contrib.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-contrib.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-contrib.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 The PostgreSQL contrib utilities have been installed. Please see
 %%PREFIX%%/share/doc/postgresql/contrib/README
 for more information.
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-plperl.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-plperl.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-plperl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Perl has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Perl as trusted or untrusted, by using either
 "createlang plperl" or "createlang plperlu".
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-plpython.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-plpython.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-plpython.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Python has been installed. Check the createlang(l) manpage for more
 info. You can install PL/Python by using "createlang plpythonu" (it
 exists as an untrusted language only).
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-pltcl.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-pltcl.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-pltcl.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PL/Tcl has been  installed. Check the createlang(l) manpage for more
 info. You can install pltcl as trusted or untrusted, by using either
 "createlang pltcl" or "createlang pltclu".
+EOM
+}
+]
Index: head/databases/postgresql96-server/files/pkg-message-server.in
===================================================================
--- head/databases/postgresql96-server/files/pkg-message-server.in	(revision 508834)
+++ head/databases/postgresql96-server/files/pkg-message-server.in	(revision 508835)
@@ -1,64 +1,69 @@
+[
+{ type: install
+  message: <<EOM
 For procedural languages and postgresql functions, please note that
 you might have to update them when updating the server.
 
 If you have many tables and many clients running, consider raising
 kern.maxfiles using sysctl(8), or reconfigure your kernel
 appropriately.
 
 The port is set up to use autovacuum for new databases, but you might
 also want to vacuum and perhaps backup your database regularly. There
 is a periodic script, %%PREFIX%%/etc/periodic/daily/502.pgsql, that
 you may find useful. You can use it to backup and perform vacuum on all
 databases nightly. Per default, it performs `vacuum analyze'. See the
 script for instructions. For autovacuum settings, please review
 ~pgsql/data/postgresql.conf.
 
 If you plan to access your PostgreSQL server using ODBC, please
 consider running the SQL script %%PREFIX%%/share/postgresql/odbc.sql
 to get the functions required for ODBC compliance.
 
 Please note that if you use the rc script,
 %%PREFIX%%/etc/rc.d/postgresql, to initialize the database, unicode
 (UTF-8) will be used to store character data by default.  Set
 postgresql_initdb_flags or use login.conf settings described below to
 alter this behaviour. See the start rc script for more info.
 
 To set limits, environment stuff like locale and collation and other
 things, you can set up a class in /etc/login.conf before initializing
 the database. Add something similar to this to /etc/login.conf:
 ---
 postgres:\
 	:lang=en_US.UTF-8:\
 	:setenv=LC_COLLATE=C:\
 	:tc=default:
 ---
 and run `cap_mkdb /etc/login.conf'.
 Then add 'postgresql_class="postgres"' to /etc/rc.conf.
 
 ======================================================================
 
 To initialize the database, run
 
   %%PREFIX%%/etc/rc.d/postgresql initdb
 
 You can then start PostgreSQL by running:
 
   %%PREFIX%%/etc/rc.d/postgresql start
 
 For postmaster settings, see ~pgsql/data/postgresql.conf
 
 NB. FreeBSD's PostgreSQL port logs to syslog by default
     See ~pgsql/data/postgresql.conf for more info
 
 NB. If you're not using a checksumming filesystem like ZFS, you might
     wish to enable data checksumming. It can only be enabled during
     the initdb phase, by adding the "--data-checksums" flag to
     the postgres_initdb_flags rcvar.  Check the initdb(1) manpage
     for more info and make sure you understand the performance
     implications.
 
 ======================================================================
 
 To run PostgreSQL at startup, add
 'postgresql_enable="YES"' to /etc/rc.conf
-
+EOM
+}
+]
Index: head/databases/powa-archivist/pkg-message
===================================================================
--- head/databases/powa-archivist/pkg-message	(revision 508834)
+++ head/databases/powa-archivist/pkg-message	(revision 508835)
@@ -1,24 +1,30 @@
+[
+{ type: install
+  message: <<EOM
 To activate powa-archvist on your PostgreSQL server, add 'powa' to the list of
 shared_preload_libraries in $PGDATA/postgresql.conf:
 
 shared_preload_libraries = 'pg_stat_statements,powa'
 track_io_timing = on
 
 Also, create the powa database and add extensions
 
 createdb powa
 psql -d powa -c "
 CREATE EXTENSION pg_stat_statements;
 CREATE EXTENSION btree_gist;
 CREATE EXTENSION powa;
 "
 
 After this, restart postgresql to start the background worker.
 
 See http://powa.readthedocs.org/en/latest/powa-archivist/installation.html#id1
 for detailed installation instructions.
 
 Optionally, but warmly recommended, is the use of databases/pg_qualstats and
 databases/pg_stat_kcache together with powa.
 
 Use the databases/powa-web port to visualize the data.
+EOM
+}
+]
Index: head/databases/puppetdb5/files/pkg-message.in
===================================================================
--- head/databases/puppetdb5/files/pkg-message.in	(revision 508834)
+++ head/databases/puppetdb5/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 If this is a new installation, please run the follow to setup your SSL/puppetdb
 server:
 
 %%PREFIX%%/bin/puppetdb ssl-setup
 
 Please also remember to add puppetdb_enable="YES" into your rc.conf.
+EOM
+}
+]
Index: head/databases/puppetdb6/files/pkg-message.in
===================================================================
--- head/databases/puppetdb6/files/pkg-message.in	(revision 508834)
+++ head/databases/puppetdb6/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 If this is a new installation, please run the follow to setup your SSL/puppetdb
 server:
 
 %%PREFIX%%/bin/puppetdb ssl-setup
 
 Please also remember to add puppetdb_enable="YES" into your rc.conf.
+EOM
+}
+]
Index: head/databases/py-htsql/pkg-message
===================================================================
--- head/databases/py-htsql/pkg-message	(revision 508834)
+++ head/databases/py-htsql/pkg-message	(revision 508835)
@@ -1,6 +1,10 @@
-**********************************************************************
-* Additional backends to HTSQL are available in the following ports: *
-*                                                                    *
-* PostgreSQL:	databases/py-htsql-pgsql                             *
-* MySQL:	databases/py-htsql-mysql                             *
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
+Additional backends to HTSQL are available in the following ports:
+
+PostgreSQL:	databases/py-htsql-pgsql
+MySQL:	databases/py-htsql-mysql
+EOM
+}
+]
Index: head/databases/qt5-sql/pkg-message
===================================================================
--- head/databases/qt5-sql/pkg-message	(revision 508834)
+++ head/databases/qt5-sql/pkg-message	(revision 508835)
@@ -1,13 +1,15 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 To enable Qt database support, install the database plugin ports. The
 following plugin ports are available:
  - databases/qt5-sqldrivers-ibase	InterBase/Firebird
  - databases/qt5-sqldrivers-mysql	MySQL
  - databases/qt5-sqldrivers-odbc	Open Database Connectivity
  - databases/qt5-sqldrivers-pgsql	PostgreSQL
  - databases/qt5-sqldrivers-sqlite2	SQLite 2
  - databases/qt5-sqldrivers-sqlite3	SQLite 3
  - databases/qt5-sqldrivers-tds		FreeTDS
-
-======================================================================
+EOM
+}
+]
Index: head/databases/redis/files/pkg-message.in
===================================================================
--- head/databases/redis/files/pkg-message.in	(revision 508834)
+++ head/databases/redis/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,11 @@
-
-===>  CONFIGURATION NOTE:
-
+[
+{ type: install
+  message: <<EOM
       To setup "%%PORTNAME%%" you need to edit the configuration file:
       %%PREFIX%%/etc/%%PORTNAME%%.conf
 
       To run redis from startup, add %%PORTNAME%%_enable="YES"
       in your /etc/rc.conf.
+EOM
+}
+]
Index: head/databases/redis-devel/files/pkg-message.in
===================================================================
--- head/databases/redis-devel/files/pkg-message.in	(revision 508834)
+++ head/databases/redis-devel/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,11 @@
-
-===>  CONFIGURATION NOTE:
-
+[
+{ type: install
+  message: <<EOM
       To setup "%%PORTNAME%%" you need to edit the configuration file:
       %%PREFIX%%/etc/%%PORTNAME%%.conf
 
       To run redis from startup, add %%PORTNAME%%_enable="YES"
       in your /etc/rc.conf.
+EOM
+}
+]
Index: head/databases/slony1v2/files/pkg-message.in
===================================================================
--- head/databases/slony1v2/files/pkg-message.in	(revision 508834)
+++ head/databases/slony1v2/files/pkg-message.in	(revision 508835)
@@ -1,25 +1,30 @@
-*******************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Please read the docs on configuring and running slony-1.
 
 Unless you did not specify the DOCS options, they are in the
 %%LOCALBASE%%/share/doc/slony1v2 directory.
 
-If you are upgrading from a prior version of slony, please read the UPGRADING
-file in the above docs directory.
-
 The script %%LOCALBASE%%/sbin/slon-mkservice can be used to create a control
 directory to run and monitor the slon daemon under svscan from daemontools.
 If you use this, be sure not to set slon_enable="YES" in /etc/rc.conf.
 
 If you prefer to use the standard startup script in %%LOCALBASE%%/etc/rc.d then
 set slon_enable="YES" in /etc/rc.conf to enable the slon.sh script.
 
 To use either of the above startup configurations, you will need to set up a
 %%LOCALBASE%%/etc/slon.conf file to tell slon what to replicate.  This file
 is documented in %%LOCALBASE%%/share/doc/slony1/adminguide/runtime-config.html
 %%PERLTOOLS%%
 %%PERLTOOLS%%To use the perl slony configuration and monitoring tools, you must
 %%PERLTOOLS%%create %%LOCALBASE%%/etc/slon_tools.conf based on the sample file.
-
-*******************************************************************************
+EOM
+}
+{ type: upgrade
+  message: <<EOM
+If you are upgrading from a prior version of slony, please read the UPGRADING
+file in the above docs directory.
+EOM
+}
+]
Index: head/databases/soci/files/pkg-message.in
===================================================================
--- head/databases/soci/files/pkg-message.in	(revision 508834)
+++ head/databases/soci/files/pkg-message.in	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 If you use dynamically loaded backends, you have to set the environment variable
 SOCI_BACKENDS_PATH to %%PREFIX%%/lib
+EOM
+}
+]
Index: head/databases/sqldeveloper/pkg-message
===================================================================
--- head/databases/sqldeveloper/pkg-message	(revision 508834)
+++ head/databases/sqldeveloper/pkg-message	(revision 508835)
@@ -1,22 +1,25 @@
-************************************************************************
+[
+{ type: install
+  message: <<EOM
 Note for Oracle users:
 
     In order to connect in a simple way to an Oracle database, it is needed to
     set ORACLE_HOME environment variable and then locate in a
     $ORACLE_HOME/network/admin/ directory a valid tnsnames.ora services file.
     Alternatively, you can set TNS_ADMIN to point out directly to that
     tnsnames.ora file.
 
     After that choose "TNS" as "Connection Type" when you are going to add a
     new connection database.
 
 
 Note for MySQL users:
 
     If you have enabled mysql support, it is needed to point out to SQL
     Developer where the MySQL JDBC classes are. Go to Tools -> Preferences
     menu, select Database -> Third Party JDBC Drivers and add the proper jar.
     Do not install 5.1 version of mysql jdbc connector; see
     https://docs.oracle.com/en/database/oracle/sql-developer/18.4/rptig/installing-sql-developer.html#GUID-3F68CF20-D03D-431C-A9A2-0EB971F06448
-
-************************************************************************
+EOM
+}
+]
Index: head/databases/sqlite-ext-miscfuncs/pkg-message
===================================================================
--- head/databases/sqlite-ext-miscfuncs/pkg-message	(revision 508834)
+++ head/databases/sqlite-ext-miscfuncs/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-*********************************************************************
+[
+{ type: install
+  message: <<EOM
 Loading extensions is by default prohibited as a security measure;
 see "Security Considerations" in
 http://www.sqlite.org/cvstrac/wiki?p=LoadableExtensions.
 
 If the sqlite3 program and library are built this way, you cannot
 use these functions from the program, you must write your own program
 using the sqlite3 API, and call sqlite3_enable_load_extension as
 described above, or else rebuilt the sqlite3 program to allow
 loadable extensions.
-*********************************************************************
+EOM
+}
+]
Index: head/databases/sqlite-ext-pcre/pkg-message
===================================================================
--- head/databases/sqlite-ext-pcre/pkg-message	(revision 508834)
+++ head/databases/sqlite-ext-pcre/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-*********************************************************************
+[
+{ type: install
+  message: <<EOM
 Loading extensions is by default prohibited as a security measure;
 see "Security Considerations" in
 http://www.sqlite.org/cvstrac/wiki?p=LoadableExtensions.
 
 If the sqlite3 program and library are built this way, you cannot
 use these functions from the program, you must write your own program
 using the sqlite3 API, and call sqlite3_enable_load_extension as
 described above, or else rebuild the sqlite3 program to allow
 loadable extensions.
-*********************************************************************
+EOM
+}
+]
Index: head/databases/sqlite-ext-regexp/pkg-message
===================================================================
--- head/databases/sqlite-ext-regexp/pkg-message	(revision 508834)
+++ head/databases/sqlite-ext-regexp/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-*********************************************************************
+[
+{ type: install
+  message: <<EOM
 Loading extensions is by default prohibited as a security measure;
 see "Security Considerations" in
 http://www.sqlite.org/cvstrac/wiki?p=LoadableExtensions.
 
 If the sqlite3 program and library are built this way, you cannot
 use these functions from the program, you must write your own program
 using the sqlite3 API, and call sqlite3_enable_load_extension as
 described above, or else rebuilt the sqlite3 program to allow
 loadable extensions.
-*********************************************************************
+EOM
+}
+]
Index: head/databases/sqlite-ext-spellfix/pkg-message
===================================================================
--- head/databases/sqlite-ext-spellfix/pkg-message	(revision 508834)
+++ head/databases/sqlite-ext-spellfix/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-*********************************************************************
+[
+{ type: install
+  message: <<EOM
 Loading extensions is by default prohibited as a security measure;
 see "Security Considerations" in
 http://www.sqlite.org/cvstrac/wiki?p=LoadableExtensions.
 
 If the sqlite3 program and library are built this way, you cannot
 use these functions from the program, you must write your own program
 using the sqlite3 API, and call sqlite3_enable_load_extension as
 described above, or else rebuilt the sqlite3 program to allow
 loadable extensions.
-*********************************************************************
+EOM
+}
+]
Index: head/databases/squirrel-sql/pkg-message
===================================================================
--- head/databases/squirrel-sql/pkg-message	(revision 508834)
+++ head/databases/squirrel-sql/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 To connect to your favorite database you can install one of the following JDBC
 drivers.
 
 * databases/mysql-connector-java
 * databases/postgresql-jdbc
 
 After that you have to configure the driver via the GUI (see Help).
+EOM
+}
+]
Index: head/databases/tarantool/files/pkg-message.in
===================================================================
--- head/databases/tarantool/files/pkg-message.in	(revision 508834)
+++ head/databases/tarantool/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,14 @@
-========================================================================
-
+[
+{ type: install
+  message: <<EOM
   After install, you'll need:
 
   Configuration at /etc/rc.conf:
 
   * Enable tarantool on startup:
       tarantool_enable="yes"
   * Path to storage link files of instances:
       tarantool_instances="%%ETCDIR%%/instances.enabled"
-
-========================================================================
+EOM
+}
+]
Index: head/databases/timescaledb/files/pkg-message.in
===================================================================
--- head/databases/timescaledb/files/pkg-message.in	(revision 508834)
+++ head/databases/timescaledb/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 To activate timescaledb on your PostgreSQL server, add 'timescaledb' to
 shared_preload_libraries in $PGDATA/postgresql.conf. For every database,
 run
 	CREATE EXTENSION IF NOT EXISTS timescaledb CASCADE;
 
 If you are upgrading, restart PostgreSQL server and run
 	ALTER EXTENSION timescaledb UPDATE TO '%%PORTVERSION%%';
+EOM
+}
+]
Index: head/databases/unixODBC/files/pkg-message.in
===================================================================
--- head/databases/unixODBC/files/pkg-message.in	(revision 508834)
+++ head/databases/unixODBC/files/pkg-message.in	(revision 508835)
@@ -1,9 +1,11 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 If installing for MySQL, then copy the example configuration file to your home
 directory as ".odbc.ini", and modify to define specific MySQL database(s). The
 file is located at "%%EXAMPLESDIR%%/MySQL/iodbc.ini".
 
 This is required to use MySQL databases from OpenOffice.org, for example.
-
-==============================================================================
+EOM
+}
+]
Index: head/databases/virtuoso/files/pkg-message.in
===================================================================
--- head/databases/virtuoso/files/pkg-message.in	(revision 508834)
+++ head/databases/virtuoso/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 Please copy and edit the sample configuration file before enabling the server:
 
 cp %%PREFIX%%/lib/virtuoso/db/virtuoso.ini.sample %%PREFIX%%/lib/virtuoso/db/virtuoso.ini
+EOM
+}
+]

Property changes on: head/databases/virtuoso/files/pkg-message.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/databases/wfb2sql/pkg-message
===================================================================
--- head/databases/wfb2sql/pkg-message	(revision 508834)
+++ head/databases/wfb2sql/pkg-message	(revision 508835)
@@ -1,34 +1,37 @@
-
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Before being able to run wfb2sql, you need to obtain a copy of the
 CIA's World Fact Book.  A copy of the WFB can be found here:
 
 *) http://www.cia.gov/cia/download.html
 
 The WFB's homepage can be found:
 
 *) http://www.cia.gov/cia/publications/factbook/
 
 Example usage:
 
 % wfb2sql --man
 % wfb2sql --database=postgresql --directory=$PWD/factbook | psql factbook
 
 NOTE: wfb2sql inserts data into the wfb schema!
 
    ______________________________________
   / BEWARE OF BLACK HELICOPTERS AFTER    \
   \ DOWNLOADING YOUR COPY OF THE WFB!!!  /
    --------------------------------------
       \
        \
                                      .::!!!!!!!:.
     .!!!!!:.                        .:!!!!!!!!!!!!
     ~~~~!!!!!!.                 .:!!!!!!!!!UWWW$$$
         :$$NWX!!:           .:!!!!!!XUWW$$$$$$$$$P
         $$$$$##WX!:      .<!!!!UW$$$$"  $$$$$$$$#
         $$$$$  $$$UX   :!!UW$$$$$$$$$   4$$$$$*
         ^$$$B  $$$$\     $$$$$$$$$$$$   d$$R"
           "*$bd$$$$      '*$$$$$$$$$$$o+#"
                """"          """""""
+EOM
+}
+]
Index: head/databases/zabbix22-libzbxpgsql/pkg-message
===================================================================
--- head/databases/zabbix22-libzbxpgsql/pkg-message	(revision 508834)
+++ head/databases/zabbix22-libzbxpgsql/pkg-message	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 In order to enable the module, add libzbxpgsql.so to the LoadModule=
 line in zabbix_agentd.conf and restart the agent with
 service zabbix_agentd restart
+EOM
+}
+]

Property changes on: head/databases/zabbix22-libzbxpgsql/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/databases/zabbix3-libzbxpgsql/pkg-message
===================================================================
--- head/databases/zabbix3-libzbxpgsql/pkg-message	(revision 508834)
+++ head/databases/zabbix3-libzbxpgsql/pkg-message	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 In order to enable the module, add libzbxpgsql.so to the LoadModule=
 line in zabbix_agentd.conf and restart the agent with
 service zabbix_agentd restart
+EOM
+}
+]

Property changes on: head/databases/zabbix3-libzbxpgsql/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/deskutils/anydesk/pkg-message
===================================================================
--- head/deskutils/anydesk/pkg-message	(revision 508834)
+++ head/deskutils/anydesk/pkg-message	(revision 508835)
@@ -1,17 +1,23 @@
+[
+{ type: install
+  message: <<EOM
 1. Minimum OS version.
 ======================
 Anydesk is a binary package for FreeBSD.
 Minimal recommended is 1 GiB system memory 
 installed but performence will be reduced.
 For good performance is recommended and 2 GiB 
 system memory.
 
 2. Important settings
 =====================
 Since Version 2.9.1 the following prerequisites have to be met:
 
 1. You need a mounted /proc directory. Either mount it manually or add it to your /etc/fstab file:
 	fstab: proc /proc procfs rw 0 0
 	manually: # mount -t procfs proc /proc
 2. You need a loaded mqueuefs module:
 	manual load: kldload mqueuefs (as root!)
+EOM
+}
+]
Index: head/deskutils/calibre/pkg-message
===================================================================
--- head/deskutils/calibre/pkg-message	(revision 508834)
+++ head/deskutils/calibre/pkg-message	(revision 508835)
@@ -1,69 +1,71 @@
----
-
+[
+{ type: install
+  message: <<EOM
 NOTE: Calibre requires Hal to be running for access to devices.  The user who
 is running Calibre also needs to be able to mount devices.  For non-root users,
 this means modifying %%PREFIX%%/etc/PolicyKit/PolicyKit.conf and adding the
 policy there.
 
 To allow a single user named "example" to mount removable devices, add the
 following:
 
   <match action="org.freedesktop.hal.storage.mount-removable">
     <match user="example">
       <return result="yes" />
     </match>
   </match>
 
 Additional users will each need their own <match user="user"> block with a
 "yes" return result.
 
 To permit all accounts to mount removable devices (allowing a denial of access
 attack) add the following:
 
   <match action="org.freedesktop.hal.storage.mount-removable">
     <return result="yes" />
   </match>
 
 ---
 
 In addition to the above, for USB and MTP devices the user needs
 to be able to access the device node in /dev.
 
 to be aware of USB devices attached to the machine, the user needs
 to be a member of the operator group:
 
 # pw groupmod operator -m yourusername
 
 Then, add the following to /etc/devfs.rules, or create this file
 if it does not exist yet:
 
 [system=10]
 add path 'usb/*' mode 0660 group operator
 
 To load these new rules, add the following to /etc/rc.conf:
 
 devfs_system_ruleset="system"
 
 Then, restart devfs
 
 # service devfs restart
 
 ---
 
 If you are using an Android device as your e-book reader, please note
 that the stock Google Books app uses a storage format that is not
 supported by calibre.  The calibre FAQ recommends that either of the
 free apps Aldiko or WordPlayer are used instead.
 
 ---
 
 A basic startup script for calibre-server has been installed.
 
 It can be customized and configured using the flags described in the
 headers of the startup script.
 
 The command line options are documented here:
 
 https://manual.calibre-ebook.com/generated/en/calibre-server.html
-
----
+EOM
+}
+]
Index: head/deskutils/conkyforecast/files/pkg-message.in
===================================================================
--- head/deskutils/conkyforecast/files/pkg-message.in	(revision 508834)
+++ head/deskutils/conkyforecast/files/pkg-message.in	(revision 508835)
@@ -1,18 +1,24 @@
+[
+{ type: install
+  message: <<EOM
 Make sure that the freetype module is loaded.  If it is not, add the following
 line to the "Modules" section of your X Windows configuration file:
 
         Load "freetype"
 
 Add the following line to the "Files" section of X Windows configuration file:
 
         FontPath "%%FONTSDIR%%/"
 
 For a working script you must define, in a user specific config file, a partner
 id and registration code for the weather.com xoap service. For this purpose
 the config file should be copied to ~/.conkyForecast.config and setup as
 required.
 
 To copy and edit the config, using the command line, run:
 
 	cp %%DATADIR%%/conkyForecast.config ~/.conkyForecast.config
 
+EOM
+}
+]
Index: head/deskutils/egroupware/files/pkg-message.in
===================================================================
--- head/deskutils/egroupware/files/pkg-message.in	(revision 508834)
+++ head/deskutils/egroupware/files/pkg-message.in	(revision 508835)
@@ -1,45 +1,48 @@
-==============================================================
+[
+{ type: install
+  message: <<EOM
 POST-INSTALL CONFIGURATION FOR eGroupware
 
 
 Make sure in your php.ini session.save_path='/tmp' is writable
 upload_max_filesize >= 8M
 
 1) Create a user and a database for eGroupware to store all
    its tables in (or choose an existing database).
    It doesn't matter what the database or user names are,
    as this will be configured in a later step.
 
 2) Add the following to your Apache configuration, and
    restart the server:
 
    ### Add the AcceptPathInfo directive only for Apache 2.0.30 or later.
    Alias /eg %%PREFIX%%/%%EG_DIR%%/
    AcceptPathInfo On
    <Directory %%PREFIX%%/%%EG_DIR%%>
       AllowOverride None
       Order Allow,Deny
       Allow from all
    </Directory>
    <Directory %%PREFIX%%/%%EG_DATA%%>
       AllowOverride None
       Order Allow,Deny
       Deny from all
    </Directory>
 
 3) Visit your eGroupware site with a browser (i.e.,
    http://your.server.com/eg/), and you should
    be taken to the install.php script, which will lead
    you through creating a config file and then
    setting up eGroupware, creating an admin account, etc.
 
 4) When you come to the setup page,please set the files'
 and backup's full path with:
    %%PREFIX%%/%%EG_DATA%%/files
    %%PREFIX%%/%%EG_DATA%%/backup
 
 For more information, see the INSTALL DOCUMENTATION:
 
 http://www.egroupware.org/index.php?page_name=wiki&lang=&wikipage=ManualSetup
-
-======================================================
+EOM
+}
+]
Index: head/deskutils/fasd/pkg-message
===================================================================
--- head/deskutils/fasd/pkg-message	(revision 508834)
+++ head/deskutils/fasd/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 To get fasd working in a shell, some initialization code must be run. Put the
 line below in your shell rc.
 
 eval "$(fasd --init auto)"
 
 This will setup a command hook that executes on every command and advanced tab
 completion for zsh and bash.
+EOM
+}
+]
Index: head/deskutils/gnome-shell-extra-extensions/pkg-message.slaves
===================================================================
--- head/deskutils/gnome-shell-extra-extensions/pkg-message.slaves	(revision 508834)
+++ head/deskutils/gnome-shell-extra-extensions/pkg-message.slaves	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 The gnome-shell extensions won't be usable until the gnome-shell
 gets restarted. To do so, running the shell, press ALT+F2 and
 type 'r'. That will restart the shell.
 
 To enable or configure an extension, after restarting the shell, you
 have to open a new gnome-tweak-tool instance. The new extensions
 should appear in the extensions section.
 
 Use the extension at your own risk.
+EOM
+}
+]
Index: head/deskutils/goesimage/pkg-message
===================================================================
--- head/deskutils/goesimage/pkg-message	(revision 508834)
+++ head/deskutils/goesimage/pkg-message	(revision 508835)
@@ -1,22 +1,26 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You installed goesimage, the program that downloads images from the
 NOAA Geostationary Operational Environment Satellite and makes them
 your wallpaper.
 
 It only makes sense to install goesimage if you are running some
 graphical desktop environment.
 
 You need to enable goesimage by running this command:
 $ goesimage-enable
 
 This will install the crontab procedure for your current user.
 
 Images will be saved in your ~/.cache/goesimage/ directory, and will
 be set as a wallpaper on the Xorg server running on DISPLAY=:0
 
 Before uninstalling, you need to disable it:
 $ goesimage-disable
 
 You can also download and update the wallpaper any time:
 $ goesimage-run-now
-======================================================================
+EOM
+}
+]
Index: head/deskutils/howm/pkg-message
===================================================================
--- head/deskutils/howm/pkg-message	(revision 508834)
+++ head/deskutils/howm/pkg-message	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 To use this port, write below to your ~/.emacs:
 
   ;(setq howm-menu-lang 'ja)
   (global-set-key "\C-c,," 'howm-menu)
   (autoload 'howm-menu "howm-mode" "Hitori Otegaru Wiki Modoki" t)
+EOM
+}
+]
Index: head/deskutils/jlj/files/pkg-message.in
===================================================================
--- head/deskutils/jlj/files/pkg-message.in	(revision 508834)
+++ head/deskutils/jlj/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
----------------------------------------------------------------------
-
+[
+{ type: install
+  message: <<EOM
 Be sure to copy %%PREFIX%%/share/examples/jlj/dot.livejournal.rc to
 ~/.livejournal.rc before running jlj.  More details can be found
 in %%PREFIX%%/share/doc/jlj/README.
-
----------------------------------------------------------------------
+EOM
+}
+]
Index: head/deskutils/kmail/pkg-message
===================================================================
--- head/deskutils/kmail/pkg-message	(revision 508834)
+++ head/deskutils/kmail/pkg-message	(revision 508835)
@@ -1,12 +1,14 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 KDE Applications versions of Akonadi, KMail, and Kontact use large
 messages on the local machine. The default size on FreeBSD is too
 small, which causes local connection problems, and Akonadi-based
 applications will be flaky (e.g. mailboxes do not display, messages
 cannot be found). Increasing the buffer size is recommended:
 
 	sysctl net.local.stream.recvspace=65536
 	sysctl net.local.stream.sendspace=65536
-
-===============================================================================
+EOM
+}
+]
Index: head/deskutils/lumina-calculator/pkg-message
===================================================================
--- head/deskutils/lumina-calculator/pkg-message	(revision 508834)
+++ head/deskutils/lumina-calculator/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 The Lumina Desktop Environment has been installed!
 
 An entry for for launching Lumina from a graphical login manager has already been added to the system, but if you with to start Lumina manually, you will need to do one of the following:
 1) Run "start-lumina-desktop" directly from the command line after logging in.
 2) Put the line "exec start-lumina-desktop" at the end of your user's "~/.xinitrc" file before running startx with any special X11 flags
 
 Also note that the system-wide default settings for Lumina are contained in ${PREFIX}/etc/luminaDesktop.conf[.dist]. While it is possible to customize the desktop to the user's liking after logging in, you may want to adjust the default settings as necessary if there are multiple user accounts on this system.
+EOM
+}
+]
Index: head/deskutils/moregroupware/pkg-message
===================================================================
--- head/deskutils/moregroupware/pkg-message	(revision 508834)
+++ head/deskutils/moregroupware/pkg-message	(revision 508835)
@@ -1,14 +1,19 @@
-
+[
+{ type: install
+  message: <<EOM
 You are suggested to set the following on php.ini:
 
 	include_path should include "."
 	register_globals should be false (off)
 	magic_quotes_gpc should be false (off)
 
 Important Notices From Release Notes:
 
 If you start with this system, please use calendar1 instead of
 calendar2, it has a somewhat unclear future.
 
 The admin3 is not finished yet, don't use it, or READ THE DOCS
 if you really want to try it!
+EOM
+}
+]
Index: head/deskutils/myitcrm/files/pkg-message.in
===================================================================
--- head/deskutils/myitcrm/files/pkg-message.in	(revision 508834)
+++ head/deskutils/myitcrm/files/pkg-message.in	(revision 508835)
@@ -1,32 +1,34 @@
-----------------------------------------------------------------------------
-Post installation instructions:
-----------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 MyITCRM is now installed in documentroot: %%WWWDIR%%.
 
 1) Create user, MySQL database and set privileges:
 
 mysql -u root -p'your_password'
 create database myitcrm;
 create user 'myitcrm'@'localhost' identified by 'your_password';
 grant all privileges on myitcrm.* to 'myitcrm'@'localhost' identified by 'your_password';
 
 2) Setup your MyITCRM:
 
 Now you can try http://your-server/myitcrm/install and setup your database.
 
 Full Path: %%WWWDIR%%
 Site Name: http://your-server/myitcrm
 
 3) Finally move the installation folder or you will not be able to login:
 
 mkdir -p $HOME/backup/myitcrm
 mv %%WWWDIR%%/install $HOME/backup/myitcrm
 
 If you need to reinstall MyITCRM, move the directory back and go back to
 step 2.
 
 Recommended php.ini settings:
 - memory_limit=32M
 - register_globals=off
 - safe_mode=off
-============================================================================
+EOM
+}
+]
Index: head/deskutils/parcellite/files/pkg-message.in
===================================================================
--- head/deskutils/parcellite/files/pkg-message.in	(revision 508834)
+++ head/deskutils/parcellite/files/pkg-message.in	(revision 508835)
@@ -1,21 +1,23 @@
-################################################################################
-
+[
+{ type: install
+  message: <<EOM
 Parcellite has been installed.
 
 This program will attempt to obtain some system information by accessing files
 in procfs and linprocfs. You must mount procfs and linprocfs filesystem for this
 to work correctly.
 This can be accomplished by adding the following line to your /etc/fstab file:
 
 # Device                Mountpoint              FStype        Options Dump Pass
 proc                    /proc                  procfs         rw      0    0
 linprocfs               /compat/linux/proc      linprocfs     rw      0    0
 
 and then, as root, executing the command:
 
 mount /proc
 
 kldload linprocfs
 mount /compat/linux/proc
-
-################################################################################
+EOM
+}
+]
Index: head/deskutils/phpicalendar/files/pkg-message.in
===================================================================
--- head/deskutils/phpicalendar/files/pkg-message.in	(revision 508834)
+++ head/deskutils/phpicalendar/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 PHPiCalendar post-install instructions
 --------------------------------------
 Edit %%WWWDIR%%/config.inc.php first to suit your needs.
+EOM
+}
+]
Index: head/deskutils/plans/files/pkg-message.in
===================================================================
--- head/deskutils/plans/files/pkg-message.in	(revision 508834)
+++ head/deskutils/plans/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,10 @@
-===========================================================
+[
+{ type: install
+  message: <<EOM
 Plans is now installed at %%WWWDIR%%
 You'll need to configure your server to accept CGI scripts
 in the directory. Plans can be configured by editing
 %%WWWDIR%%/plans_config.pl
-===========================================================
+EOM
+}
+]
Index: head/deskutils/py-autokey/pkg-message
===================================================================
--- head/deskutils/py-autokey/pkg-message	(revision 508834)
+++ head/deskutils/py-autokey/pkg-message	(revision 508835)
@@ -1,5 +1,8 @@
-*Important*
-
+[
+{ type: install
+  message: <<EOM
 This is an X11 application, and as such will not function 100% on 
 distributions that default to using Wayland instead of Xorg.
-
+EOM
+}
+]
Index: head/deskutils/py-khal/pkg-message
===================================================================
--- head/deskutils/py-khal/pkg-message	(revision 508834)
+++ head/deskutils/py-khal/pkg-message	(revision 508835)
@@ -1,5 +1,7 @@
-######################################################################
-
+[
+{ type: install
+  message: <<EOM
 Khal needs LANG to be set to a UTF-8 locale (e.g. en_US.UTF-8) to run.
-
-######################################################################
+EOM
+}
+]

Property changes on: head/deskutils/py-khal/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1,2 +1 ##
-yes
-\ No newline at end of property
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/deskutils/py-khard/files/pkg-message.in
===================================================================
--- head/deskutils/py-khard/files/pkg-message.in	(revision 508834)
+++ head/deskutils/py-khard/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Copy the example configuration from
 %%PREFIX%%/share/examples/khard/khard.conf.example to
 $XDG_CONFIG_HOME/khard/khard.conf
-
-======================================================================
+EOM
+}
+]
Index: head/deskutils/py-paperless/files/pkg-message.in
===================================================================
--- head/deskutils/py-paperless/files/pkg-message.in	(revision 508834)
+++ head/deskutils/py-paperless/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,7 @@
-=========================================================================
+[
+{ type: install
+  message: <<EOM
   Please see `man paperless' for details on how to configure paperless.
-=========================================================================
+EOM
+}
+]
Index: head/deskutils/sugarcrm/files/pkg-message.in
===================================================================
--- head/deskutils/sugarcrm/files/pkg-message.in	(revision 508834)
+++ head/deskutils/sugarcrm/files/pkg-message.in	(revision 508835)
@@ -1,41 +1,43 @@
-##
-
+[
+{ type: install
+  message: <<EOM
 Notes:
 
 1.  Sugar Community Edition requires that you increase the default PHP
     memory limit from 8Mb to 64Mb in the php.ini file.  You should edit this
     file and ensure that the memory_limit parameter should be set to 64Mb or
     greater:
 
 memory_limit = 64M	; Maximum amount of memory a script may consume
 
 2.  Sugar Community Edition requires the following three parameters to be set
     in your php.ini.
 
 allow_call_time_pass_reference = Off
 safe_mode = Off		; disable "safe mode"
 session.save_path = "/tmp"
 
     While Sugar Community Edition will work (albeit inefficiently) with
     allow_call_time_pass_reference enabled, safe_mode must be disabled to
     allow the system to work at all.  For more information on why these
     parameters are unnecessary, please see the PHP manual.
 
 3.  In order to get Apache or your preferred web server to recognise Sugar
     Community Edition's location on your disk, you'll need to put the
     following line (or the equivalent) into the web server configuration:
 
 Alias /sugarcrm %%WWWDIR%%
 <Directory %%WWWDIR%%>
 	AllowOverride None
 	Require all granted
 </Directory>
 
 4.  For full information on how to get the best out of Sugar Community
     Edition, please see the documentation on the web:
 
     http://www.sugarforge.org/content/documentation/
 
 5.  Enjoy!
-
-##
+EOM
+}
+]
Index: head/deskutils/taskd/pkg-message
===================================================================
--- head/deskutils/taskd/pkg-message	(revision 508834)
+++ head/deskutils/taskd/pkg-message	(revision 508835)
@@ -1,22 +1,26 @@
-=======================================================================
+[
+{ type: install
+  message: <<EOM
 taskd requires user directed configuration prior to use.
 
 See taskwarrior.org/docs/taskserver/configure.html for configuration
 information. The generate script has been installed to
 /usr/local/share/taskd.
 
 After completing configuration to start taskd at system startup add
 taskd_enable="YES" to rc.conf. If you configured taskd with a TASKDDATA
 other than /var/db/taskd you will also need to set taskd_data in rc.conf
 to that path.
 
 The rc script will start taskd as the unprivileged user taskd, this
 requires that your TASKDDATA directory and /var/log/taskd.log be owned
 by taskd:taskd. If you prefer to use another user specify this in
 rc.conf using taskd_user.
 
 To add users see: taskwarrior.org/docs/taskserver/user.html
 
 To configure taskwarrior to use your taskd server see:
 taskwarrior.org/docs/taskserver/taskwarrior.html
-=======================================================================
+EOM
+}
+]
Index: head/deskutils/thinkingrock/files/pkg-message.in
===================================================================
--- head/deskutils/thinkingrock/files/pkg-message.in	(revision 508834)
+++ head/deskutils/thinkingrock/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,17 @@
-*****************************************************************
-
+[
+{ type: install
+  message: <<EOM
  Please note that Thinkingrock will not work with diablo-jdk16
  or diablo-jre16. Set the JAVA_HOME variable to a different
  Java installation:
 
  e.g. tcsh:
  > setenv JAVA_HOME /usr/local/jdk1.6.0
  > thinkingrock
 
  e.g. sh:
  $ export JAVA_HOME=/usr/local/diablo-jre1.5.0
  $ thinkingrock
-
-*****************************************************************
+EOM
+}
+]
Index: head/deskutils/tine20/files/pkg-message.in
===================================================================
--- head/deskutils/tine20/files/pkg-message.in	(revision 508834)
+++ head/deskutils/tine20/files/pkg-message.in	(revision 508835)
@@ -1,63 +1,68 @@
-
+[
+{ type: install
+  message: <<EOM
 Preparing the database
 ---------------------------------------------
 
 Connect to your MySQL database server using your favorite client. Create a
 database with UTF8 charset and connect user with the data you had entered
 into the 'database' array of your 'config.inc.php':
 
 mysql> CREATE DATABASE tine20db DEFAULT CHARACTER SET 'UTF8';
 mysql> GRANT ALL PRIVILEGES ON tine20db.* TO 'tine20user'@'localhost'
 IDENTIFIED BY 'tine20pw';
 
 The first command creates the database 'tine20db'. The second one adds an
 user 'tine20user' with password 'tine20pw' and all privileges on the previously
 created database. Connections of that user are allowed only from from localhost.
 
 
 Start the setup GUI
 ---------------------------------------------
 
 Open your favorite web browser and go to:
 
 http://your_webserver/path_to_tine/setup.php
 
 Log in with the username/password you filled into
 the 'setupuser' array of your config.inc.php.
 
 
 %%DISTNAME%% has been installed into:
 
     %%WWWDIR%%
 
 Example Apache config:
 
     Alias /tine20/ "%%WWWDIR%%/"
 
     <Directory "%%WWWDIR%%/">
         Options none
         AllowOverride Limit
 
         Order Deny,Allow
         Deny from all
         Allow from 127.0.0.1 .example.com
     </Directory>
 
     # if you wish to serve ActiveSync request (mobile devices), add this:
     RewriteRule /Microsoft-Server-ActiveSync(.*) %%WWWDIR%%/index.php?frontend=activesync [E=REDIRECT_ACTIVESYNC:true,E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
 
     # if you wish to serve CalDAV requests (thunderbird lighting), add this:
     RewriteCond %{REQUEST_METHOD} !^(GET|POST)$
     RewriteRule ^/tine20/$                  %%WWWDIR%%/index.php?frontend=webdav [E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
     RewriteRule ^/tine20/addressbooks       %%WWWDIR%%/index.php?frontend=webdav [E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
     RewriteRule ^/tine20/calendars          %%WWWDIR%%/index.php?frontend=webdav [E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
     RewriteRule ^/tine20/principals         %%WWWDIR%%/index.php?frontend=webdav [E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
     RewriteRule ^/tine20/webdav             %%WWWDIR%%/index.php?frontend=webdav [E=REMOTE_USER:%{HTTP:Authorization},L,QSA]
 
 More information on how to setup ActiveSync can be found here:
 
 https://wiki.tine20.org/Admins/Synchronisation
 
 More information on how to setup CalDAV can be found here:
 
 https://wiki.tine20.org/Admins/Thunderbird-Synchronisation
+EOM
+}
+]
Index: head/deskutils/xfce4-tumbler/files/pkg-message.in
===================================================================
--- head/deskutils/xfce4-tumbler/files/pkg-message.in	(revision 508834)
+++ head/deskutils/xfce4-tumbler/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 To override the default configuration, you must copy the rc-file:
 
 	mkdir ~/.config/tumbler
 	cp %%PREFIX%%/etc/xdg/tumbler/tumbler.rc ~/.config/tumbler
 
 The COVER plugin requires manual configuration.
 
 For more information see http://docs.xfce.org/xfce/thunar/tumbler
+EOM
+}
+]
Index: head/devel/9base/pkg-message
===================================================================
--- head/devel/9base/pkg-message	(revision 508834)
+++ head/devel/9base/pkg-message	(revision 508835)
@@ -1,7 +1,9 @@
-======================================================
-
+[
+{ type: install
+  message: <<EOM
 Some of 9base tools require fdescfs to be mounted.
 Please refer manpages fdescfs(5) and fstab(5) to 
 mount it.
-
-======================================================
+EOM
+}
+]
Index: head/devel/RStudio/pkg-message
===================================================================
--- head/devel/RStudio/pkg-message	(revision 508834)
+++ head/devel/RStudio/pkg-message	(revision 508835)
@@ -1,11 +1,15 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You installed RStudio: Integrated development environment (IDE) for R.
 
 Please note that RStudio requires /proc to be mounted.
 
 The usual way to do this is to add this line to /etc/fstab:
 proc /proc procfs rw 0 0
 
 and then run this command as root:
 # mount /proc
-======================================================================
+EOM
+}
+]
Index: head/devel/aegis/pkg-message
===================================================================
--- head/devel/aegis/pkg-message	(revision 508834)
+++ head/devel/aegis/pkg-message	(revision 508835)
@@ -1,7 +1,9 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Aegis has been installed.
 
 If you want more development tools, check "devel/cook" and "devel/fhist".
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/allegro-devel/files/pkg-message.in
===================================================================
--- head/devel/allegro-devel/files/pkg-message.in	(revision 508834)
+++ head/devel/allegro-devel/files/pkg-message.in	(revision 508835)
@@ -1,25 +1,27 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Allegro-devel has been installed.
 
 Allegro-devel have two Demos (Games)
 
 Cosmic Protector and SPEED
 
 
 You can use executable
 
     %%LOCALBASE%%/bin/cosmic_protector
 
     %%LOCALBASE%%/bin/speed
 
 
 Or can use desktop files
 
     %%LOCALBASE%%/share/applications/cosmic_protector.desktop
 
     %%LOCALBASE%%/share/applications/speed.desktop
 
 Have fun!
-
-===============================================================================
+EOM
+}
+]
Index: head/devel/android-tools-fastboot/files/pkg-message.in
===================================================================
--- head/devel/android-tools-fastboot/files/pkg-message.in	(revision 508834)
+++ head/devel/android-tools-fastboot/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 The port installed fastboot(1) under %%PREFIX%%/bin. However, there's
 a different fastboot(8) under /sbin. To avoid accidentally invoking
 the wrong command make sure either to
 
 - adjust PATH environment variable to have fastboot(1) found first
 - create a shell alias with absolute path to fastboot(1)
 - create a symlink with different name in PATH e.g., under ~/bin
+EOM
+}
+]
Index: head/devel/apr1/pkg-message
===================================================================
--- head/devel/apr1/pkg-message	(revision 508834)
+++ head/devel/apr1/pkg-message	(revision 508835)
@@ -1,7 +1,9 @@
-/!\ ================================================================== /!\
-
+[
+{ type: install
+  message: <<EOM
 The Apache Portable Runtime project removed support for FreeTDS with
 version 1.6. Users requiring MS-SQL connectivity must migrate
 configurations to use the added ODBC driver and FreeTDS' ODBC features.
-
-/!\ ================================================================== /!\
+EOM
+}
+]
Index: head/devel/arduino/files/pkg-message.in
===================================================================
--- head/devel/arduino/files/pkg-message.in	(revision 508834)
+++ head/devel/arduino/files/pkg-message.in	(revision 508835)
@@ -1,18 +1,24 @@
+[
+{ type: install
+  message: <<EOM
 Notes on using the Arduino IDE:
 
 To allow serial port locking, add your user to the dialer group:
     pw groupmod dialer -m myuser
 
 User settings are in ~/.arduino/preferences.txt.  Edit the file
 when the IDE is not running.
 
 Setting the launcher for help files:
     launcher=firefox
 
 Showing what the IDE is doing for build and upload commands (only
 visible if you started the IDE from a console):
     build.verbose=true
     upload.verbose=true
 
 To start the IDE:
     %%PREFIX%%/bin/arduino
+EOM
+}
+]
Index: head/devel/aros-sdk/files/pkg-message.in
===================================================================
--- head/devel/aros-sdk/files/pkg-message.in	(revision 508834)
+++ head/devel/aros-sdk/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,8 @@
-        ATTENTION:
-
+[
+{ type: install
+  message: <<EOM
 Remember to add %%AROS_SDK_PATH%%/bin to your PATH environment
 variable before using the AROS SDK.
+EOM
+}
+]
Index: head/devel/artifactory/files/pkg-message.in
===================================================================
--- head/devel/artifactory/files/pkg-message.in	(revision 508834)
+++ head/devel/artifactory/files/pkg-message.in	(revision 508835)
@@ -1,39 +1,43 @@
-
-=== INSTALLATION ===
-
+[
+{ type: install
+  message: <<EOM
 Artifactory is now installed in %%APP_HOME%%
 
 You may want to activate it in /etc/rc.conf:
 
   # echo %%APP_NAME%%_enable="YES" >> /etc/rc.conf
 
 Now, start Artifactory:
 
   # service %%APP_NAME%% start
 
 Once Artifactory is started, point your web browser to:
 
 http://localhost:8081/
 
 Artifactory configuration files are located in %%APP_HOME%%/etc
 
 Please don't forget to review and edit the files in the
 %%APP_HOME%%/etc directory to suit your needs.
 
 Full documentation may be found at:
 
 https://www.jfrog.com/confluence/display/RTF/Welcome+to+Artifactory
-
-=== DEINSTALLATION ==
-
+EOM
+}
+{ type: remove
+  message: <<EOM
 If, when, Artifactory is removed, and you no longer require the
 runtime database and configuration files, you can delete the
 following directory:
 
   %%VARDIR%%
 
 Please double-check before removing this directory as it contains
 the database files that Artifactory requires if you do decide to
 re-install it again.
 
 Enjoy!
+EOM
+}
+]
Index: head/devel/awless/pkg-message
===================================================================
--- head/devel/awless/pkg-message	(revision 508834)
+++ head/devel/awless/pkg-message	(revision 508835)
@@ -1,9 +1,11 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Setup your AWS account by exporting AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY
 environment variables.
 
 If you have previously used aws CLI or aws-shell, your credentials will be
 automatically loaded by awless from the ~/.aws/credentials folder.
-
-===============================================================================
+EOM
+}
+]

Property changes on: head/devel/awless/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/boost-all/pkg-message.python
===================================================================
--- head/devel/boost-all/pkg-message.python	(revision 508834)
+++ head/devel/boost-all/pkg-message.python	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 You have built the Boost.Python library. You have to add the following
 options when building your own code:
 
 Compiler options:
    -I%%PYTHON_INCLUDEDIR%% -I%%LOCALBASE%%/include
 
 Linker options:
    -L%%PYTHON_LIBDIR%% -L%%LOCALBASE%%/lib -lboost_python -l%%PYTHON_VERSION%%
+EOM
+}
+]
Index: head/devel/boost-all/pkg-message.threads
===================================================================
--- head/devel/boost-all/pkg-message.threads	(revision 508834)
+++ head/devel/boost-all/pkg-message.threads	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 You have built the Boost library with thread support.
 
 Don't forget to add -pthread to your linker options when
 linking your code.
+EOM
+}
+]
Index: head/devel/boost_build/files/pkg-message.in
===================================================================
--- head/devel/boost_build/files/pkg-message.in	(revision 508834)
+++ head/devel/boost_build/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,21 @@
+[
+{ type: install
+  message: <<EOM
 To use boost_build, it is necessary to set BOOST_ROOT in
 your environment:
 
  sh/bash/ksh:
 	BOOST_ROOT=%%DATADIR%% ; export BOOST_ROOT
  csh:
 	setenv BOOST_ROOT %%DATADIR%%
 
 Note: The default toolchain is gcc.
 To override this on a system-wide basis, edit this file:
 	%%DATADIR%%/site-config.jam
 
 For an example of a per-user settings file which may be
 copied to your home directory, see:
 	 %%DATADIR%%/user-config.jam
+EOM
+}
+]
Index: head/devel/bugzilla44/files/pkg-message.in
===================================================================
--- head/devel/bugzilla44/files/pkg-message.in	(revision 508834)
+++ head/devel/bugzilla44/files/pkg-message.in	(revision 508835)
@@ -1,38 +1,43 @@
-==========================================================================
+[
+{ type: install
+  message: <<EOM
   Bugzilla has now been installed.  To quick setup you have to:
 
   1. Create database user who has rights on bugs database manipulation
      by following mysql commands (for MySQL 4.0 or later):
 
      GRANT SELECT, INSERT, UPDATE, DELETE, INDEX, ALTER, CREATE, LOCK TABLES,
            CREATE TEMPORARY TABLES, DROP, REFERENCES
 	   ON <database>.* TO <dbuser>@<host>
 	   IDENTIFIED BY '<password>';
      FLUSH PRIVILEGES;
 
      where <database> is a bugs database name; <dbuser> is a bugs database
            owner; <host> is a host there bugzilla is being setup;
            <password> is a database owner's password;
 
   2. Change working directory to %%WWWDIR%%
   3. Run "./checksetup.pl" script as root user
   4. Read output carefully and follow all instructions
 
   For more complete database setup and post-installation instructions
   and security tips/notes please read "Bugzilla Guide" in
   %%DOCSDIR%%/en/html/ (chapter 2: "Installing Bugzilla")
-==========================================================================
-
+EOM
+}
+{ type: upgrade
+  message: <<EOM
 For upgrades:
   0. Back up your data.
 
   1. Run the command inside %%WWWDIR%%
       find . -mindepth 2 -name .htaccess -exec rm -f {} \;
 
   2. Run "./checksetup.pl" inside %%WWWDIR%%.  You may need to
      run it several times.
 
   3. Restart your Web server, especially if you're using mod_perl: this
      will save you from a number of troubles.
-
-==========================================================================
+EOM
+}
+]
Index: head/devel/bugzilla50/files/pkg-message.in
===================================================================
--- head/devel/bugzilla50/files/pkg-message.in	(revision 508834)
+++ head/devel/bugzilla50/files/pkg-message.in	(revision 508835)
@@ -1,38 +1,43 @@
-==========================================================================
+[
+{ type: install
+  message: <<EOM
   Bugzilla has now been installed.  To quick setup you have to:
 
   1. Create database user who has rights on bugs database manipulation
      by following mysql commands (for MySQL 4.0 or later):
 
      GRANT SELECT, INSERT, UPDATE, DELETE, INDEX, ALTER, CREATE, LOCK TABLES,
            CREATE TEMPORARY TABLES, DROP, REFERENCES
 	   ON <database>.* TO <dbuser>@<host>
 	   IDENTIFIED BY '<password>';
      FLUSH PRIVILEGES;
 
      where <database> is a bugs database name; <dbuser> is a bugs database
            owner; <host> is a host there bugzilla is being setup;
            <password> is a database owner's password;
 
   2. Change working directory to %%WWWDIR%%
   3. Run "./checksetup.pl" script as root user
   4. Read output carefully and follow all instructions
 
   For more complete database setup and post-installation instructions
   and security tips/notes please read "Bugzilla Guide" in
   %%DOCSDIR%%/en/html/ (chapter 2: "Installing Bugzilla")
-==========================================================================
-
+EOM
+}
+{ type: install
+  message: <<EOM
 For upgrades:
   0. Back up your data.
 
   1. Run the command inside %%WWWDIR%%
       find . -mindepth 2 -name .htaccess -exec rm -f {} \;
 
   2. Run "./checksetup.pl" inside %%WWWDIR%%.  You may need to
      run it several times.
 
   3. Restart your Web server, especially if you're using mod_perl: this
      will save you from a number of troubles.
-
-==========================================================================
+EOM
+}
+]
Index: head/devel/ccache/files/pkg-message.in
===================================================================
--- head/devel/ccache/files/pkg-message.in	(revision 508834)
+++ head/devel/ccache/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,9 @@
-
+[
+{ type: install
+  message: <<EOM
 NOTE:
 Please read %%DOCSDIR%%/%%HOWTO%% for
 information on using ccache with FreeBSD ports and src.
-
+EOM
+}
+]
Index: head/devel/cdash/files/pkg-message.in
===================================================================
--- head/devel/cdash/files/pkg-message.in	(revision 508834)
+++ head/devel/cdash/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 Your CDash configuration file is located at
 %%PREFIX%%/www/CDash/cdash/config.local.php.
 
 Please create the %%DB_TYPE%% username 'cdash' and
 grant him privileges over a database named 'cdash'.
 
 A sample CDash project is available for download at
 http://www.cdash.org/download/CDashTest.zip.
+EOM
+}
+]
Index: head/devel/cgit/files/pkg-message.in
===================================================================
--- head/devel/cgit/files/pkg-message.in	(revision 508834)
+++ head/devel/cgit/files/pkg-message.in	(revision 508835)
@@ -1,14 +1,18 @@
----------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 cgit has been successfully installed.
 
 To enable cgit in Apache, use something like the following:
 
   <Directory "%%WWWDIR%%/">
       AllowOverride None
       Options +ExecCGI
       Require all granted 
   </Directory>
 
 Documentation and sample configuration can be found
 in %%DOCSDIR%%/cgitrc.5.txt.
----------------------------------------------------
+EOM
+}
+]
Index: head/devel/chruby/files/pkg-message.in
===================================================================
--- head/devel/chruby/files/pkg-message.in	(revision 508834)
+++ head/devel/chruby/files/pkg-message.in	(revision 508835)
@@ -1,27 +1,29 @@
-======================================================================
-
+[
+{ type: install
+  message: <<EOM
 Add the following to the /etc/profile.d/chruby.sh, ~/.bash_profile or
 ~/.zprofile file:
 
 source %%PREFIX%%/share/chruby/chruby.sh
 
 By default chruby will search for Rubies installed into /opt/rubies/ or
 ~/.rubies/. For non-standard installation locations, simply set the RUBIES
 variable:
 
 RUBIES=(
   /opt/jruby-1.7.0
   $HOME/src/rubinius
 )
 
 If you are migrating from another Ruby manager, set `RUBIES` accordingly:
 
 RVM: RUBIES=(~/.rvm/rubies/*)
 rbenv: RUBIES=(~/.rbenv/versions/*)
 rbfu: RUBIES=('~/.rbfu/rubies/*)
 
 To enable auto-switching of Rubies specified by .ruby-version files:
 
 source %%PREFIX%%/share/chruby/auto.sh
-
-======================================================================
+EOM
+}
+]
Index: head/devel/cl-asdf/files/pkg-message.in
===================================================================
--- head/devel/cl-asdf/files/pkg-message.in	(revision 508834)
+++ head/devel/cl-asdf/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,16 @@
-==========================================================================
+[
+{ type: install
+  message: <<EOM
 To use asdf and depending ports, you will have to configure your
 Lisp systems so they know where to find asdf itself and the system
 definition files.
 
 A default configuration is installed in
 
   %%PREFIX%%/etc/asdf-init.lisp
 
 Review this file for further information, or simply load it from your
 Lisp initialization file.
-==========================================================================
+EOM
+}
+]
Index: head/devel/clojure-cider/pkg-message
===================================================================
--- head/devel/clojure-cider/pkg-message	(revision 508834)
+++ head/devel/clojure-cider/pkg-message	(revision 508835)
@@ -1,7 +1,12 @@
-
+[
+{ type: install
+  message: <<EOM
 Starting with CIDER 0.7, the installation of cider-nrepl is manual.
 Please install devel/leiningen and add the following to
 ~/.lein/profiles.clj:
 
 { :user
  { :plugins [[cider/cider-nrepl "0.7.0-SNAPSHOT"]] }
+EOM
+}
+]
Index: head/devel/colorgcc/files/pkg-message.in
===================================================================
--- head/devel/colorgcc/files/pkg-message.in	(revision 508834)
+++ head/devel/colorgcc/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,11 @@
--------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 colorgcc is installed.
 
 For a quick start:
     - cp ${EXAMPLESDIR}/colorgccrc ${HOME}/.colorgcc
     - export CC=${PREFIX}/bin/colorgcc
--------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/cons/pkg-message
===================================================================
--- head/devel/cons/pkg-message	(revision 508834)
+++ head/devel/cons/pkg-message	(revision 508835)
@@ -1,16 +1,22 @@
+[
+{ type: install
+  message: <<EOM
 Copyright (C) 1996-2000 Free Software Foundation, Inc.
 
 Cons is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
 (at your option) any later version.
 
 Cons is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; see the file COPYING.  If not, write to
 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.
+EOM
+}
+]
Index: head/devel/ctags/files/pkg-message.in
===================================================================
--- head/devel/ctags/files/pkg-message.in	(revision 508834)
+++ head/devel/ctags/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,7 @@
-**************************************************************************
+[
+{ type: install
+  message: <<EOM
 The executable for Exuberant CTAGS is installed as %%PREFIX%%/bin/exctags
-**************************************************************************
+EOM
+}
+]
Index: head/devel/cutter/pkg-message
===================================================================
--- head/devel/cutter/pkg-message	(revision 508834)
+++ head/devel/cutter/pkg-message	(revision 508835)
@@ -1,7 +1,11 @@
-************************************************************************
+[
+{ type: install
+  message: <<EOM
 Please note that code-coverage is not fully supported on FreeBSD and
 cutter will crash when used to generate a report.  The problem has been
 reported upstream and no fix is available ATM. However, a workaround has
 been found: adding the '--keep-opening-modules' argument to cutter's
 command-line circumvents the problem.
-************************************************************************
+EOM
+}
+]
Index: head/devel/cvsd/pkg-message
===================================================================
--- head/devel/cvsd/pkg-message	(revision 508834)
+++ head/devel/cvsd/pkg-message	(revision 508835)
@@ -1,4 +1,8 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 You should set up user and group ids for cvsd, create a
 chrooted filesystem and create repositories.
-************************************************************
+EOM
+}
+]
Index: head/devel/cvsgraph/files/pkg-message.in
===================================================================
--- head/devel/cvsgraph/files/pkg-message.in	(revision 508834)
+++ head/devel/cvsgraph/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 You must copy %%PREFIX%%/etc/cvsgraph.conf.sample to
 %%PREFIX%%/etc/cvsgraph.conf in order to use cvsgraph.
-
+EOM
+}
+]
Index: head/devel/cvsmonitor/pkg-message
===================================================================
--- head/devel/cvsmonitor/pkg-message	(revision 508834)
+++ head/devel/cvsmonitor/pkg-message	(revision 508835)
@@ -1,7 +1,11 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 The rest of installation must be completed manually.
 Type in your browser URL like
 	http://localhost/cgi-bin/cvsmonitor/setup.pl
 
 and follow instructions.
-************************************************************
+EOM
+}
+]
Index: head/devel/cvstrac/pkg-message
===================================================================
--- head/devel/cvstrac/pkg-message	(revision 508834)
+++ head/devel/cvstrac/pkg-message	(revision 508835)
@@ -1,5 +1,10 @@
-
+[
+{ type: install
+  message: <<EOM
 Please follow the detailed installation instructions in the CVSTrac
 Wiki at http://www.cvstrac.org/cvstrac/wiki?p=CvstracInstallation
 for information on how to get CVSTrac up and running in your preferred
 configuration.
+EOM
+}
+]
Index: head/devel/cvsweb/files/pkg-message.in
===================================================================
--- head/devel/cvsweb/files/pkg-message.in	(revision 508834)
+++ head/devel/cvsweb/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,19 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 Quickstart:
 	cd %%PREFIX%%/etc/cvsweb
 	cp cvsweb.conf.dist cvsweb.conf
 
 and you can browse your CVS repository via web if you set up
 your web server correctly.  The URL to get to the cvsweb
 will be like `http://localhost/cgi-bin/cvsweb.cgi/'.
 
   To configure its appearance and repository entries to
 browse, edit cvsweb.conf* as you like.
 
   For further information, please look into the directory
 `%%DOCSDIR%%'.
-************************************************************
+EOM
+}
+]
Index: head/devel/cvsweb3/files/pkg-message.in
===================================================================
--- head/devel/cvsweb3/files/pkg-message.in	(revision 508834)
+++ head/devel/cvsweb3/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,19 @@
-************************************************************
+[
+{ type: install
+  message: <<EOM
 Quickstart:
 	cd %%PREFIX%%/etc/cvsweb
 	cp cvsweb.conf.dist cvsweb.conf
 
 and you can browse your CVS repository via web if you set up
 your web server correctly.  The URL to get to the cvsweb
 will be like `http://localhost/cgi-bin/cvsweb.cgi/'.
 
   To configure its appearance and repository entries to
 browse, edit cvsweb.conf* as you like.
 
   For further information, please look into the directory
 `%%DOCSDIR%%'.
-************************************************************
+EOM
+}
+]
Index: head/devel/cweb/pkg-message
===================================================================
--- head/devel/cweb/pkg-message	(revision 508834)
+++ head/devel/cweb/pkg-message	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 You'll want to install some TeX package along with this.
 I recommend getting teTeX if you're not short on disk space.
+EOM
+}
+]
Index: head/devel/distcc/files/pkg-message.in
===================================================================
--- head/devel/distcc/files/pkg-message.in	(revision 508834)
+++ head/devel/distcc/files/pkg-message.in	(revision 508835)
@@ -1,26 +1,32 @@
+[
+{ type: install
+  message: <<EOM
 WARNING: distcc[d] performs NO AUTHENTICATION at all and should
 ONLY be used in trusted networks!
 
 Distccd now requires the --allow (-a) argument when running
 in daemon mode. This option restricts distcc to a specific
 network, by default this port uses 127.0.0.0/8, you should
 change this by specifying your own distccd_flags in
 /etc/rc.conf, see the script in %%PREFIX%%/etc/rc.d/distccd
 for a template.
 
 Additionally it is recommended that you add entries to
 /etc/syslog.conf to record all distccd log messages to a file
 such as /var/log/distccd.log.
 
 Example syslog.conf entry:
 
 !distccd
 *.*					/var/log/distccd.log
 
 The daemon runs on port 3632 by default. You can change that
 value by calling distccd with the -p parameter, e.g.
 `distccd -p 4711'. Do not edit the rc.d script to achieve this
 instead override the value of distccd_flags in /etc/rc.conf.
 
 Note that remote daemons currently won't work if they cannot
 resolve the reverse DNS of the master machine
+EOM
+}
+]
Index: head/devel/eiffelstudio/files/pkg-message.in
===================================================================
--- head/devel/eiffelstudio/files/pkg-message.in	(revision 508834)
+++ head/devel/eiffelstudio/files/pkg-message.in	(revision 508835)
@@ -1,9 +1,11 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 EiffelStudio has been installed.
 
 Everything was installed under "%%DATADIR%%".
 
 A wrapper script was also installed as "eiffelstudio".
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/eric6/pkg-message
===================================================================
--- head/devel/eric6/pkg-message	(revision 508834)
+++ head/devel/eric6/pkg-message	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 eric6 has the following localized language packages:
     de-eric6
     es-eric6
     ru-eric6
+EOM
+}
+]
Index: head/devel/fam/files/pkg-message.in
===================================================================
--- head/devel/fam/files/pkg-message.in	(revision 508834)
+++ head/devel/fam/files/pkg-message.in	(revision 508835)
@@ -1,31 +1,33 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 1. In order to run this port, please add the following line to /etc/rpc if
 it is not already there:
 
 --------------------------------------------------------------------
 sgi_fam		391002
 --------------------------------------------------------------------
 
 2. To run fam from inetd (the recommended method), then please add the
 following lines to /etc/inetd.conf if they are not already there:
 
 --------------------------------------------------------------------
 # FAM: File Alteration Monitor [devel/fam]
 sgi_fam/1-2	stream rpc/tcp wait root %%LOCALBASE%%/bin/fam	fam
 --------------------------------------------------------------------
 
 After modifying /etc/inetd.conf, you must (as root) run:
 
 	killall -HUP inetd
 
 Fam also requires that portmapper is running.  Add the appropriate
 entry to /etc/rc.conf:
 
 For 4.x:
 Add portmap_enable="YES" and either reboot or run /usr/sbin/portmap.
 
 For 5.x and later:
 Add rpcbind_enable="YES" and either reboot or run /etc/rc.d/rpcbind start.
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/fistgen/files/pkg-message.in
===================================================================
--- head/devel/fistgen/files/pkg-message.in	(revision 508834)
+++ head/devel/fistgen/files/pkg-message.in	(revision 508835)
@@ -1,21 +1,23 @@
-============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Templates were installed in %%DATADIR%%.
 Examples were installed in %%EXAMPLESDIR%%.
 
 To generate example filesystem you should copy
 %%DATADIR%%/templates
 into your working directory and specify path to description of
 filesystem you want to build, e.g.:
 	cd /work
 	mkdir myfs
 	cp -rf %%DATADIR%%/templates myfs/
 	cd myfs
 	fistgen %%EXAMPLESDIR%%/tests/aclfs.fist
 
 Then you can chdir to out/OS-VER/FSNAME and type 'make'.
 
 See %%DOCSDIR%%/README, %%DOCSDIR%%/INSTALL
 and http://www.filesystems.org for further instructions.
-
-============================================================================
+EOM
+}
+]
Index: head/devel/flyspray/files/pkg-message.in
===================================================================
--- head/devel/flyspray/files/pkg-message.in	(revision 508834)
+++ head/devel/flyspray/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-##
-
+[
+{ type: install
+  message: <<EOM
 Please read the installation instructions in:
 
 	%%DOCSDIR%%/README.FreeBSD
-
-##
+EOM
+}
+]
Index: head/devel/gamin/pkg-message
===================================================================
--- head/devel/gamin/pkg-message	(revision 508834)
+++ head/devel/gamin/pkg-message	(revision 508835)
@@ -1,21 +1,23 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Gamin will only provide realtime notification of changes for at most n files,
 where n is the minimum value between (kern.maxfiles * 0.7) and
 (kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
 
 If you often open several large folders with Nautilus, you might want to
 increase the kern.maxfiles tunable (you do not need to set
 kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
 
 The behavior of gamin can be controlled via the various gaminrc files.
 See http://www.gnome.org/~veillard/gamin/config.html on how to create
 these files.  In particular, if you find gam_server is taking up too much
 CPU time polling for changes, something like the following may help
 in one of the gaminrc files:
 
 # reduce polling frequency to once per 10 seconds
 # for UFS file systems in order to lower CPU load
 fsset ufs poll 10
-
-===============================================================================
+EOM
+}
+]
Index: head/devel/git/files/pkg-message.in
===================================================================
--- head/devel/git/files/pkg-message.in	(revision 508834)
+++ head/devel/git/files/pkg-message.in	(revision 508835)
@@ -1,24 +1,23 @@
-
-------------------------------------------------------------------------
-*************************** GITWEB *************************************
+[
+{ type: install
+  message: <<EOM
 If you installed the GITWEB option please follow these instructions:
 
 In the directory %%EXAMPLESDIR%%/gitweb you can find all files to
 make gitweb work as a public repository on the web.
 
 All you have to do to make gitweb work is:
 1) Please be sure you're able to execute CGI scripts in
    %%EXAMPLESDIR%%/gitweb.
 2) Set the GITWEB_CONFIG variable in your webserver's config to
    %%ETCDIR%%/gitweb.conf. This variable is passed to gitweb.cgi.
 3) Restart server.
-*************************** GITWEB *************************************
 
-*************************** CONTRIB ************************************
+
 If you installed the CONTRIB option please note that the scripts are
 installed in %%PREFIX%%/share/git-core/contrib. Some of them require
 other ports to be installed (perl, python, etc), which you may need to
 install manually.
-*************************** CONTRIB ************************************
-------------------------------------------------------------------------
-
+EOM
+}
+]
Index: head/devel/git/pkg-message
===================================================================
--- head/devel/git/pkg-message	(revision 508834)
+++ head/devel/git/pkg-message	(revision 508835)
@@ -1,12 +1,15 @@
--------------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 git is installed.
 
 You might wish to configure git for your user (author) name and email.
 
 Also, if git's color output is broken (eg. color codes visible instead of
 applied) please consult the core.pager option in the git-config(1) manual, and
 your preferred pager's manual for color output options.
 
 bash completion script was renamed to git-completion.bash to keep original name
-
--------------------------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/git-lfs/pkg-message
===================================================================
--- head/devel/git-lfs/pkg-message	(revision 508834)
+++ head/devel/git-lfs/pkg-message	(revision 508835)
@@ -1,22 +1,28 @@
+[
+{ type: install
+  message: <<EOM
 To get started with Git LFS, the following commands can be used:
 
   1. Setup Git LFS on your system. You only have to do this once per
      repository per machine:
 
      $ git lfs install
 
   2. Choose the type of files you want to track, for examples all ISO
      images, with git lfs track:
 
      $ git lfs track "*.iso"
 
   3. The above stores this information in gitattributes(5) files, so
      that file need to be added to the repository:
 
      $ git add .gitattributes
 
   4. Commit, push and work with the files normally:
 
      $ git add file.iso
      $ git commit -m "Add disk image"
      $ git push
+EOM
+}
+]

Property changes on: head/devel/git-lfs/pkg-message
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/devel/git-merge-changelog/pkg-message
===================================================================
--- head/devel/git-merge-changelog/pkg-message	(revision 508834)
+++ head/devel/git-merge-changelog/pkg-message	(revision 508835)
@@ -1,16 +1,19 @@
-************************************************************************
+[
+{ type: install
+  message: <<EOM
 Usage of git-merge-changelog:
 
 - Add to .git/config of the checkout (or to your $HOME/.gitconfig) the
   lines:
 
 	[merge "merge-changelog"]
 		name = GNU-style ChangeLog merge driver
 		driver = git-merge-changelog %O %A %B
 
 - In every directory that contains a ChangeLog file, add a file
   '.gitattributes' with this line:
 
 	ChangeLog	merge=merge-changelog
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/gitblit/files/pkg-message.in
===================================================================
--- head/devel/gitblit/files/pkg-message.in	(revision 508834)
+++ head/devel/gitblit/files/pkg-message.in	(revision 508835)
@@ -1,24 +1,26 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 	By default, Gitblit stores all data (users, settings,
 	repositories, etc) in ${contextFolder}/WEB-INF/data.
 	Specifying an alternate "baseFolder" allows for simple
 	upgrades in the future.
 
 	You can specify "baseFolder":
 	- via GITBLIT_HOME, or
 	- via web.xml, or
 	- via JNDI.
 
 	For value of "baseFolder" use value "/usr/local/gitblit".
 
 	You can login with the default administrator credentials:
 	admin / admin
 
 	!!!MAKE SURE TO CHANGE THE ADMINISTRATOR USERNAME AND/OR PASSWORD!!!
 
 
 	More informations:
 	http://gitblit.com/setup_war.html
-
-************************************************************************
+EOM
+}
+]

Property changes on: head/devel/gitblit/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-ON
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/github-backup-utils/files/pkg-message.in
===================================================================
--- head/devel/github-backup-utils/files/pkg-message.in	(revision 508834)
+++ head/devel/github-backup-utils/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,7 @@
-=====================================================================
+[
+{ type: install
+  message: <<EOM
 Review and update %%PREFIX%%/etc/github.backup.config for your needs.
-=====================================================================
+EOM
+}
+]
Index: head/devel/gitlab-runner/pkg-message
===================================================================
--- head/devel/gitlab-runner/pkg-message	(revision 508834)
+++ head/devel/gitlab-runner/pkg-message	(revision 508835)
@@ -1,17 +1,21 @@
-==============================================================================
+[
+{ type: install
+  message: <<EOM
 To enable gitlab-runner:
 
   sysrc gitlab_runner_enable=yes
 
 To start gitlab-runner:
 
   service gitlab_runner start
 
 To register with GitLab:
 
   service gitlab_runner register
 
 To list status of GitLab:
 
   service gitlab_runner list
-==============================================================================
+EOM
+}
+]
Index: head/devel/gitlist/files/pkg-message.in
===================================================================
--- head/devel/gitlist/files/pkg-message.in	(revision 508834)
+++ head/devel/gitlist/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 The port will install an htdocs dir %%WWWDIR%%.
 Copy %%WWWDIR%%/config.ini-example
 to %%WWWDIR%%/config.ini and
 edit it to make it use your git repositories.
 Then configure your webserver to use the htdocs directory.
+EOM
+}
+]
Index: head/devel/gitolite2/files/pkg-message.in
===================================================================
--- head/devel/gitolite2/files/pkg-message.in	(revision 508834)
+++ head/devel/gitolite2/files/pkg-message.in	(revision 508835)
@@ -1,18 +1,20 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Final gitolite installation instructions:
 
 Any ssh user can be a gitolite provider. Simply run the following command as
 the user:
 
 %%PREFIX%%/bin/gl-setup /path/to/admin.ssh.key.pub
 
 This will setup up the configuration files for gitolite, designating where the
 repositories are located and other options.
 
 The admin ssh key allows full access to the gitolite-admin repository where
 additional users and repositories can be configured.
 
 By default, the git user is created for use by gitolite.
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/gitphp/files/pkg-message.in
===================================================================
--- head/devel/gitphp/files/pkg-message.in	(revision 508834)
+++ head/devel/gitphp/files/pkg-message.in	(revision 508835)
@@ -1,16 +1,20 @@
-*****************************************************************
+[
+{ type: install
+  message: <<EOM
 You will also need to configure Apache.  Consider adding the following to
 your httpd.conf:
 
      Alias /gitphp/ "%%WWWDIR%%/"
 
     <Directory "%%WWWDIR%%">
         AllowOverride all
 	Allow from all
     </Directory>
 
 Then restart Apache: 'apachectl graceful'
 
 Then visit 'http://localhost/gitphp/' in a web-browser and follow the
 configuration instructions.
-*****************************************************************
+EOM
+}
+]
Index: head/devel/gittrac/pkg-message
===================================================================
--- head/devel/gittrac/pkg-message	(revision 508834)
+++ head/devel/gittrac/pkg-message	(revision 508835)
@@ -1,4 +1,9 @@
-
+[
+{ type: install
+  message: <<EOM
 Please follow the detailed installation instructions in the CVSTrac
 Wiki at http://www.cvstrac.org/cvstrac/wiki?p=GitTrac for information
 on how to get GitTrac up and running in your preferred configuration.
+EOM
+}
+]
Index: head/devel/gnustep/pkg-message
===================================================================
--- head/devel/gnustep/pkg-message	(revision 508834)
+++ head/devel/gnustep/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 To use GNUstep you need to source the envoroment in your shell:
 
 for sh/bash:
 . /usr/local/GNUstep/System/Library/Makefiles/GNUstep.sh
 
 for csh:
 source /usr/local/GNUstep/System/Library/Makefiles/GNUstep.csh
 
 then start your applications with "openapp <name>".
+EOM
+}
+]
Index: head/devel/godot2-tools/pkg-message
===================================================================
--- head/devel/godot2-tools/pkg-message	(revision 508834)
+++ head/devel/godot2-tools/pkg-message	(revision 508835)
@@ -1,7 +1,11 @@
-============================================================
+[
+{ type: install
+  message: <<EOM
 This is the old v2 of godot and is only for compatability
 to be able to work on older projects.
 
 If you are planning any development in godot
 please install the newer v3 version in devel/godot-tools
-============================================================
+EOM
+}
+]
Index: head/devel/gogland-eap/files/pkg-message.in
===================================================================
--- head/devel/gogland-eap/files/pkg-message.in	(revision 508834)
+++ head/devel/gogland-eap/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 There is experimental native (faster) file watching support which is
 disabled by default.  Currently there are problems with watching large
 trees.  To enable edit %%DATADIR%%/bin/idea.properties and append
 
       idea.filewatcher.disabled=false
       idea.filewatcher.executable.path=%%IDEA_HOME%%/bin/fsnotifier
 
 Only enable fsnotifier if your projects have < 600 files.
+EOM
+}
+]

Property changes on: head/devel/gogland-eap/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/gogs/files/pkg-message.in
===================================================================
--- head/devel/gogs/files/pkg-message.in	(revision 508834)
+++ head/devel/gogs/files/pkg-message.in	(revision 508835)
@@ -1,23 +1,27 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You installed %%PORTNAME%%: Go Git Service.
 
 It is recommended to run %%PORTNAME%% as a service:
 # service gogs start
 
 To enable the service at startup you should execute the command:
 sysrc %%PORTNAME%%_enable="YES"
 
 You can also run %%PORTNAME%% manually with a command:
 # %%PORTNAME%%
 
 Connect to %%PORTNAME%% on the default port 3000:
 http://localhost:3000
 
 Configuration file is %%ETCDIR%%/conf/app.ini.
 You can only edit it when %%PORTNAME%% isn't running.
 
 %%PORTNAME_FANCY%% needs an SSH daemon, so make sure sure you execute:
 sysrc sshd_enable="YES"
 and sshd is configured to listen on the same port that is configured
 in %%PORTNAME%%.
-======================================================================
+EOM
+}
+]
Index: head/devel/hg-git/pkg-message
===================================================================
--- head/devel/hg-git/pkg-message	(revision 508834)
+++ head/devel/hg-git/pkg-message	(revision 508835)
@@ -1,14 +1,16 @@
-====
-
+[
+{ type: install
+  message: <<EOM
 To enable the Hg-Git extension it has to be added in either
 
 '$PREFIX/etc/mercurial/hgrc' (per-system),
 '$HOME/.hgrc' (per-user) or
 '<repo>/.hg/hgrc' (per-repository)
 
 Mercurial configuration file:
 
 [extensions]
 hggit =
-
-====
+EOM
+}
+]
Index: head/devel/ice/pkg-message
===================================================================
--- head/devel/ice/pkg-message	(revision 508834)
+++ head/devel/ice/pkg-message	(revision 508835)
@@ -1,14 +1,20 @@
+[
+{ type: install
+  message: <<EOM
 The default on-the-wire encoding for Ice changed in version 3.5 and IPv6
 is now enabled by default. ABI versions are not compatible.
 
 For details on these and additional changes please read the upgrading
 instructions available at
 
 	http://doc.zeroc.com/x/SQpN
 
 For on-the-wire background compatibility add
 
 	Ice.IPv6=0
 	Ice.Default.EncodingVersion=1.0
 
 to your Ice application configuration.
+EOM
+}
+]
Index: head/devel/interactive_rebase_tool/pkg-message
===================================================================
--- head/devel/interactive_rebase_tool/pkg-message	(revision 508834)
+++ head/devel/interactive_rebase_tool/pkg-message	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 To configure Git to use interactive-rebase-tool for interactive
 rebasing by default, run:
 
 git config --global sequence.editor interactive-rebase-tool
+EOM
+}
+]
Index: head/devel/ioncube/files/pkg-message.in
===================================================================
--- head/devel/ioncube/files/pkg-message.in	(revision 508834)
+++ head/devel/ioncube/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 You have installed the ionCube loader package.
 
 The following lines have been added to %%PREFIX%%/etc/php/ext-05-ioncube.ini so
 that the extension has been automatically activated.
 
 [Zend]
 zend_extension=%%PREFIX%%/lib/php/%%PHP_EXT_DIR%%/ioncube/ioncube_loader.so
 zend_extension_ts=%%PREFIX%%/lib/php/%%PHP_EXT_DIR%%/ioncube/ioncube_loader_ts.so
+EOM
+}
+]
Index: head/devel/jenkins/pkg-message
===================================================================
--- head/devel/jenkins/pkg-message	(revision 508834)
+++ head/devel/jenkins/pkg-message	(revision 508835)
@@ -1,10 +1,12 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Please login to the Jenkins web interface and secure with a password,
 when installing for the first time.
 
 More information:
 https://wiki.jenkins-ci.org/display/JENKINS/Quick+and+Simple+Security
 https://wiki.jenkins-ci.org/display/JENKINS/Standard+Security+Setup
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/jenkins-lts/pkg-message
===================================================================
--- head/devel/jenkins-lts/pkg-message	(revision 508834)
+++ head/devel/jenkins-lts/pkg-message	(revision 508835)
@@ -1,10 +1,12 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Please login to the Jenkins web interface and secure with a password,
 when installing for the first time.
 
 More information:
 https://wiki.jenkins-ci.org/display/JENKINS/Quick+and+Simple+Security
 https://wiki.jenkins-ci.org/display/JENKINS/Standard+Security+Setup
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/jetbrains-clion/files/pkg-message.in
===================================================================
--- head/devel/jetbrains-clion/files/pkg-message.in	(revision 508834)
+++ head/devel/jetbrains-clion/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 There is native (faster) file watching support backed by kqueue which is
 enabled by default.  If you encounter problems  problems with watching large
 trees, you disable it by appending the following property into
 %%DATADIR%%/bin/idea.properties:
 
       idea.filewatcher.disabled=true
+EOM
+}
+]
Index: head/devel/jetbrains-goland/files/pkg-message.in
===================================================================
--- head/devel/jetbrains-goland/files/pkg-message.in	(revision 508834)
+++ head/devel/jetbrains-goland/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 There is native (faster) file watching support backed by kqueue which is
 enabled by default.  If you encounter problems  problems with watching large
 trees, you disable it by appending the following property into
 %%DATADIR%%/bin/idea.properties:
 
       idea.filewatcher.disabled=true
+EOM
+}
+]
Index: head/devel/jetbrains-phpstorm/files/pkg-message.in
===================================================================
--- head/devel/jetbrains-phpstorm/files/pkg-message.in	(revision 508834)
+++ head/devel/jetbrains-phpstorm/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 There is native (faster) file watching support backed by kqueue which is
 enabled by default.  If you encounter problems  problems with watching large
 trees, you disable it by appending the following property into
 %%DATADIR%%/bin/idea.properties:
 
       idea.filewatcher.disabled=true
+EOM
+}
+]
Index: head/devel/jetbrains-webstorm/files/pkg-message.in
===================================================================
--- head/devel/jetbrains-webstorm/files/pkg-message.in	(revision 508834)
+++ head/devel/jetbrains-webstorm/files/pkg-message.in	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 There is native (faster) file watching support backed by kqueue which is
 enabled by default.  If you encounter problems  problems with watching large
 trees, you disable it by appending the following property into
 %%DATADIR%%/bin/idea.properties:
 
       idea.filewatcher.disabled=true
+EOM
+}
+]
Index: head/devel/jline/files/pkg-message.in
===================================================================
--- head/devel/jline/files/pkg-message.in	(revision 508834)
+++ head/devel/jline/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,9 @@
----------------------------------------
+[
+{ type: install
+  message: <<EOM
 To use JLine add the file
 %%JAVAJARDIR%%/jline.jar
 to your classpath!
----------------------------------------
+EOM
+}
+]
Index: head/devel/kronosnet/pkg-message
===================================================================
--- head/devel/kronosnet/pkg-message	(revision 508834)
+++ head/devel/kronosnet/pkg-message	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 For correct operation, maximum socket buffer size must be tuned
 by performing the following command as root :
 
 # sysctl kern.ipc.maxsockbuf=18874368
 
 To preserve this setting across reboots, append the following
 to /etc/sysctl.conf :
 
 kern.ipc.maxsockbuf=18874368
+EOM
+}
+]

Property changes on: head/devel/kronosnet/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/libaravis/pkg-message
===================================================================
--- head/devel/libaravis/pkg-message	(revision 508834)
+++ head/devel/libaravis/pkg-message	(revision 508835)
@@ -1,10 +1,16 @@
+[
+{ type: install
+  message: <<EOM
 Aravis require broadcast to find devices.
 
 Dont forget run:
 # route add 255.255.255.255 -iface lan0
 
 or add in rc.conf
 static_routes="bcast:lan0"
 route_bcast="255.255.255.255 -iface lan0"
 
 where lan0 - network interface name.
+EOM
+}
+]

Property changes on: head/devel/libaravis/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-ON
\ No newline at end of property
+yes
\ No newline at end of property
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/devel/libburn/pkg-message
===================================================================
--- head/devel/libburn/pkg-message	(revision 508834)
+++ head/devel/libburn/pkg-message	(revision 508835)
@@ -1,16 +1,22 @@
+[
+{ type: install
+  message: <<EOM
 You will need to enable CAM support in the kernel.  Your kernel
 configuation should include:
     for SCSI CD/DVD devices:
 	device scbus
 	device cd
 	device pass
     for ATA CD/DVD devices you will need the above, plus:
 	device atapicam
 
 You will also want to make the CD devices world read- and writable.
 In /etc/devfs.rules, add the following:
 	[system=10]
 	add path 'acd*' mode 0666
 	add path 'cd*' mode 0666
 	add path 'pass*' mode 0666
 	add path 'xpt*' mode 0666
+EOM
+}
+]
Index: head/devel/libdlmalloc/pkg-message
===================================================================
--- head/devel/libdlmalloc/pkg-message	(revision 508834)
+++ head/devel/libdlmalloc/pkg-message	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 Please see http://g.oswego.edu/dl/html/malloc.html or the distribution file
 (malloc-<ver>.c) for documenation on the use of Doug Lea's malloc library.
+EOM
+}
+]
Index: head/devel/libgtop/files/pkg-message
===================================================================
--- head/devel/libgtop/files/pkg-message	(revision 508834)
+++ head/devel/libgtop/files/pkg-message	(revision 508835)
@@ -1,13 +1,15 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 In order to use the File System read/write monitor, you must chmod
 /dev/devstat so that all users can open it read-only.  For example:
 
 # chmod 0444 /dev/devstat
 
 In order for this to persist across reboots, add the following to
 /etc/devfs.conf:
 
 perm	devstat	0444
-
-===============================================================================
+EOM
+}
+]
Index: head/devel/libinotify/pkg-message
===================================================================
--- head/devel/libinotify/pkg-message	(revision 508834)
+++ head/devel/libinotify/pkg-message	(revision 508835)
@@ -1,39 +1,41 @@
-============================================================================
-
+[
+{ type: install
+  message: <<EOM
 Libinotify functionality on FreeBSD is missing support for
 
   - detecting a file being moved into or out of a directory within the
     same filesystem
   - certain modifications to a symbolic link (rather than the
     file it points to.)
 
 in addition to the known limitations on all platforms using kqueue(2)
 where various open and close notifications are unimplemented.
 
 This means the following regression tests will fail:
 
 Directory notifications:
    IN_MOVED_FROM
    IN_MOVED_TO
 
 Open/close notifications:
    IN_OPEN
    IN_CLOSE_NOWRITE
    IN_CLOSE_WRITE
 
 Symbolic Link notifications:
    IN_DONT_FOLLOW
    IN_ATTRIB
    IN_MOVE_SELF
    IN_DELETE_SELF
 
 Kernel patches to address the missing directory and symbolic link
 notifications are available from:
 
 https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches
 
-=============================================================================
 You might want to consider increasing the kern.maxfiles tunable if you plan
 to use this library for applications that need to monitor activity of a lot
 of files.
-=============================================================================
+EOM
+}
+]
Index: head/devel/liblognorm/files/pkg-message.in
===================================================================
--- head/devel/liblognorm/files/pkg-message.in	(revision 508834)
+++ head/devel/liblognorm/files/pkg-message.in	(revision 508835)
@@ -1,19 +1,18 @@
-***********************************************************************
-
-WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  WARNING
-
+[
+{ type: upgrade
+  maximum_versio: 0.3.8
+  message: <<EOM
 The previous version of liblognorm (0.3.7) used the libee CEE support
 library in its API.
 
 In 2013, Pavel Levshin converted liblognorm to native JSON, which helped
 improve performance and simplicity for many client applications.
 Unfortunately, this change broke interface compatibility (and there was
 no way to avoid that, obviously...).
 
 The current library is the result of that effort. Application developers
 are encouraged to switch to this version, as it provides the benefit of
 a simpler API. PREVIOUS VERSIONS ARE INCOMPATIBLE WITH THIS ONE
-
-WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  WARNING
-
-***********************************************************************
+EOM
+}
+]
Index: head/devel/libnxt/files/pkg-message.in
===================================================================
--- head/devel/libnxt/files/pkg-message.in	(revision 508834)
+++ head/devel/libnxt/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,10 @@
-
--------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 Using libnxt in your programs will require the following compile options:
 
 	-I%%PREFIX%%/include/libnxt
 	-L%%PREFIX%%/lib -lnxt
--------------------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/libopensync/pkg-message
===================================================================
--- head/devel/libopensync/pkg-message	(revision 508834)
+++ head/devel/libopensync/pkg-message	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 Think about using a multisync-gui, start by trying to sync your various devices
 and applications one by one with a directory; then try to assemble the devices
 in the way you want.
 
 Do not disable the syncing of data, as it disables syncing everything.
 
 See http://www.opensync.org/wiki/DeviceCompatibilityList for a list of
 compatible devices.
+EOM
+}
+]
Index: head/devel/libpasori/pkg-message
===================================================================
--- head/devel/libpasori/pkg-message	(revision 508834)
+++ head/devel/libpasori/pkg-message	(revision 508835)
@@ -1,3 +1,7 @@
-******************************************************************************
+[
+{ type: install
+  message: <<EOM
 Place your FeliCa card on PaSoRi before executing commands.
-******************************************************************************
+EOM
+}
+]
Index: head/devel/libreadline-java/files/pkg-message.in
===================================================================
--- head/devel/libreadline-java/files/pkg-message.in	(revision 508834)
+++ head/devel/libreadline-java/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,9 @@
---------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 To use readline-java add the file
 %%JAVAJARDIR%%/libreadline-java.jar
 to your classpath!
---------------------------------------------------
+EOM
+}
+]
Index: head/devel/libsigsegv/pkg-message
===================================================================
--- head/devel/libsigsegv/pkg-message	(revision 508834)
+++ head/devel/libsigsegv/pkg-message	(revision 508835)
@@ -1,4 +1,8 @@
-====
+[
+{ type: install
+  message: <<EOM
 Note that the stackoverflow handling functions of this library need
 procfs mounted on /proc.
-====
+EOM
+}
+]
Index: head/devel/libvirt/files/pkg-message.in
===================================================================
--- head/devel/libvirt/files/pkg-message.in	(revision 508834)
+++ head/devel/libvirt/files/pkg-message.in	(revision 508835)
@@ -1,27 +1,32 @@
-
+[
+{ type: install
+  message: <<EOM
 To enable libvirtd please add libvirtd_enable="YES" to
 /etc/rc.conf.
 
 NOTE ON CONFIGURATION:
 
 The libvirt port does not come with networking configuration enabled.
 The 'default' network definition is available at:
 
   %%EXAMPLESDIR%%/networks/default.xml
 
 To enable this network please do the following:
 
   cp %%EXAMPLESDIR%%/networks/default.xml %%ETCDIR%%/qemu/networks
 
 To configure this network for autostart, execute the following:
 
   ln -s ../default.xml %%ETCDIR%%/qemu/networks/autostart/default.xml
 
 If you have libvirtd already running you'll need to restart it for changes
 to take effect.
 %%BHYVE%%
 %%BHYVE%%For more details on using libvirt with bhyve please refer to:
 %%BHYVE%% %%DOCSDIR%%/html/drvbhyve.html
 %%BHYVE%%   or:
 %%BHYVE%% http://libvirt.org/drvbhyve.html
 %%BHYVE%%
+EOM
+}
+]
Index: head/devel/linux-ltp/pkg-message
===================================================================
--- head/devel/linux-ltp/pkg-message	(revision 508834)
+++ head/devel/linux-ltp/pkg-message	(revision 508835)
@@ -1,7 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 To run the LTP test suite, execute, as root:
 
     kldload linux linux64
     mount -t linsysfs linsysfs /compat/linux/sys
     mount -t linprocfs linprocfs /compat/linux/proc
     chroot /compat/linux /opt/ltp/runltp -Q
-
+EOM
+}
+]
Index: head/devel/magit/pkg-message
===================================================================
--- head/devel/magit/pkg-message	(revision 508834)
+++ head/devel/magit/pkg-message	(revision 508835)
@@ -1,6 +1,9 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 To use Magit, you should add following line to your .emacs file:
 
 (require 'magit)
-
-**********************************************************************
+EOM
+}
+]
Index: head/devel/mercurial/files/pkg-message.in
===================================================================
--- head/devel/mercurial/files/pkg-message.in	(revision 508834)
+++ head/devel/mercurial/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,11 @@
-====
+[
+{ type: install
+  message: <<EOM
 Note that we now install a few more files in %%PREFIX%%/share/mercurial:
 - shell completion scripts (bash, tcsh and zsh)
 - FastCGI / WSGI scripts for web access to repositories
   see http://www.mercurial-scm.org/wiki/PublishingRepositories
 - various documentation files
-====
+EOM
+}
+]
Index: head/devel/monotone/files/pkg-message.in
===================================================================
--- head/devel/monotone/files/pkg-message.in	(revision 508834)
+++ head/devel/monotone/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,8 @@
-*****************************************************************************
+[
+{ type: install
+  message: <<EOM
 You have installed the monotone package. For users who are upgrating monotone,
 please read %%DOCSDIR%%/UPGRADE for upgrade instructions.
-*****************************************************************************
+EOM
+}
+]
Index: head/devel/msp430-debug-stack/files/pkg-message.in
===================================================================
--- head/devel/msp430-debug-stack/files/pkg-message.in	(revision 508834)
+++ head/devel/msp430-debug-stack/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,10 @@
--------------------------------------------------------------------------
-
+[
+{ type: install
+  message: <<EOM
 	When plugging in FET debuggers a symlink will be created from
 	the corresponding cuaU device to mspfetXX with XX being the
 	product number (see mspfet.conf).
         Only a single instance of each FET product is supported.
-
--------------------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/nexus2-oss/files/pkg-message.in
===================================================================
--- head/devel/nexus2-oss/files/pkg-message.in	(revision 508834)
+++ head/devel/nexus2-oss/files/pkg-message.in	(revision 508835)
@@ -1,31 +1,35 @@
-========================================================================
+[
+{ type: install
+  message: <<EOM
 Nexus Repository Manager OSS %%VERSION%% has been successfully installed!
 
 To enable Nexus, add the following line to /etc/rc.conf[.local]:
 
   %%NEXUS_RC%%_enable="YES"
 
 IMPORTANT: Nexus runs by default as user %%USER%%!
 
 Configuration
 =============
 * Start Nexus 'service %%NEXUS_RC%% start'
 * Open the following URL in your browser: http://localhost:8081/nexus
 * Log in with the admin account 'admin/admin123', configure Nexus and
   change this password immediately!
 
 Common Locations
 ================
 The configuration files can be found at:
   %%ETCDIR%%
 
 The work, log, and run directories are located at:
 * %%WORKDIR%%
 * %%LOGDIR%%
 * %%RUNDIR%%
 
 Documentation
 =============
 Further documentation can be found in the official Nexus Book at:
   https://books.sonatype.com/nexus-book/%%BOOKVERSION%%/reference/index.html
-========================================================================
+EOM
+}
+]
Index: head/devel/oozie/files/pkg-message.in
===================================================================
--- head/devel/oozie/files/pkg-message.in	(revision 508834)
+++ head/devel/oozie/files/pkg-message.in	(revision 508835)
@@ -1,3 +1,8 @@
-
+[
+{ type: install
+  message: <<EOM
 Oozie was installed into %%PREFIX%%/oozie directory.  Consider adding
 %%PREFIX%%/oozie/bin to your $PATH.
+EOM
+}
+]
Index: head/devel/opencl/pkg-message
===================================================================
--- head/devel/opencl/pkg-message	(revision 508834)
+++ head/devel/opencl/pkg-message	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 OpenCL is the first open, royalty-free standard for cross-platform,
 parallel programming of modern processors.
+EOM
+}
+]
Index: head/devel/openocd/pkg-message
===================================================================
--- head/devel/openocd/pkg-message	(revision 508834)
+++ head/devel/openocd/pkg-message	(revision 508835)
@@ -1,24 +1,26 @@
-===============================================================================
-
+[
+{ type: install
+  message: <<EOM
 OpenOCD is now installed, this software can damage your hardware, enjoy!
 
 User's guide is at:
  http://openocd.sourceforge.net/documentation/online-docs/
 Developer's guide is at:
  http://openocd.sourceforge.net/documentation/openocd-reference-manual/
 
 FreeBSD USB NOTE:
  To allow an ordinary user to acces any of the the hotplug USB interface
  add him/her to the operator group  (pw groupmod operator -m username), then
  setup the devfs subsystem by adding these lines to the following files:
 
  ***/etc/devfs.rules:
  [localrules=10]
         add path 'ugen*' mode 0660 group operator
         add path 'usb/*'  mode 0660 group operator
         add path 'usb' mode 0770 group operator
 
  ***/etc/rc.conf:
 	devfs_system_ruleset="localrules"
-
-===============================================================================
+EOM
+}
+]
Index: head/devel/p5-Heap-Simple/pkg-message
===================================================================
--- head/devel/p5-Heap-Simple/pkg-message	(revision 508834)
+++ head/devel/p5-Heap-Simple/pkg-message	(revision 508835)
@@ -1,11 +1,12 @@
-
-******************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 This module is useless by itself!  It requires one or both of:
 
 - devel/p5-Heap-Simple-Perl (a pure perl implementation of the interface)
 - devel/p5-Heap-Simple-XS (an XS implementation of the interface.)
 
 Please take the time to install one or both of these now.
-
-******************************************************************************
+EOM
+}
+]
Index: head/devel/p5-Moose/pkg-message
===================================================================
--- head/devel/p5-Moose/pkg-message	(revision 508834)
+++ head/devel/p5-Moose/pkg-message	(revision 508835)
@@ -1,31 +1,37 @@
+[
+{ type: install
+  message: <<EOM
 Note that this release of p5-Moose is incompatible with
 older versions of the following modules:
 
        Catalyst                        <= 5.80017
        Devel::REPL                     <= 1.003008
        Fey::ORM                        <= 0.23
        File::ChangeNotify              <= 0.15
        KiokuDB                         <= 0.41
        MooseX::Aliases                 <= 0.07
        MooseX::AttributeHelpers        <= 0.22
        MooseX::AttributeInflate        <= 0.02
        MooseX::Attribute::Prototype    <= 0.10
        MooseX::ClassAttribute          <= 0.13
        MooseX::FollowPBP               <= 0.02
        MooseX::HasDefaults             <= 0.02
        MooseX::InstanceTracking        <= 0.04
        MooseX::LazyRequire             <= 0.05
        MooseX::MethodAttributes        <= 0.22
        MooseX::NonMoose                <= 0.13
        MooseX::Params::Validate        <= 0.05
        MooseX::Role::Cmd               <= 0.06
        MooseX::Role::WithOverloading   <= 0.07
        MooseX::SemiAffordanceAccessor  <= 0.05
        MooseX::Singleton               <= 0.22
        MooseX::StrictConstructor       <= 0.08
        MooseX::Types                   <= 0.19
        MooseX::UndefTolerant           <= 0.04
        namespace::autoclean            <= 0.08
        Pod::Elemental                  <= 0.093280
 
 They will need to be updated.
+EOM
+}
+]
Index: head/devel/p5-ResourcePool/pkg-message
===================================================================
--- head/devel/p5-ResourcePool/pkg-message	(revision 508834)
+++ head/devel/p5-ResourcePool/pkg-message	(revision 508835)
@@ -1,8 +1,10 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 From this version 1.0000 on, the p5-ResourcePool package will not contain
 resource bindings anymore. The previously included bindings for
 DBI and Net::LDAP are available in the databases/p5-ResourcePool-Resource-DBI
 and net/p5-ResourcePool-Resource-Net-LDAP ports.
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/p5-SVN-Web/pkg-message
===================================================================
--- head/devel/p5-SVN-Web/pkg-message	(revision 508834)
+++ head/devel/p5-SVN-Web/pkg-message	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 After install, use svnweb-install to configure SVN::Web.
 Use perldoc SVN::Web for more information.
+EOM
+}
+]
Index: head/devel/papi/pkg-message
===================================================================
--- head/devel/papi/pkg-message	(revision 508834)
+++ head/devel/papi/pkg-message	(revision 508835)
@@ -1,11 +1,17 @@
+[
+{ type: install
+  message: <<EOM
 In order to get PAPI working on this machine you must setup a kernel with
 
  * options HWPMC_HOOKS
  * device hwpmc
 
 Or load hwpmc module manually:
 
 # kldload hwpmc.ko
 
 Additionally, for i386 systems you need:
  * device apic
+EOM
+}
+]
Index: head/devel/pcsc-lite/files/pkg-message.in
===================================================================
--- head/devel/pcsc-lite/files/pkg-message.in	(revision 508834)
+++ head/devel/pcsc-lite/files/pkg-message.in	(revision 508835)
@@ -1,26 +1,28 @@
-------------------------------------------------------------------------
-
+[
+{ type: install
+  message: <<EOM
 PC/SC-Lite has been installed.
 
 You need to install a driver for your smartcard reader e.g.,
 - devel/libccid
 - security/ifd-slb_rf60
 
 For cardreaders connected to the serial port: After installing the driver,
 please update the pcscd configuration file:
 %%PREFIX%%/etc/reader.conf
 
 For USB cardreaders add the following lines to /etc/devd.conf to enable
 hotplugging:
 
 attach 100 {
         device-name "ugen[0-9]+";
         action "%%PREFIX%%/sbin/pcscd -H";
 };
 
 detach 100 {
         device-name "ugen[0-9]+";
         action "%%PREFIX%%/sbin/pcscd -H";
 };
-
-------------------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/pecl-xdebug/files/pkg-message.in
===================================================================
--- head/devel/pecl-xdebug/files/pkg-message.in	(revision 508834)
+++ head/devel/pecl-xdebug/files/pkg-message.in	(revision 508835)
@@ -1,21 +1,24 @@
-*****************************************************************************
+[
+{ type: install
+  message: <<EOM
 The php debugger 'xdebug' has been installed successful.
 Add a line containing
 
 	extension=%%PREFIX%%/lib/php/%%PHP_EXT_DIR%%/xdebug.so
 
 or
 
 	zend_extension=%%PREFIX%%/lib/php/%%PHP_EXT_DIR%%/xdebug.so
 
 to your php.ini to load it. xdebug is not compatible with the extension
 'Zend Optimizer' - you're only able to use one of them. So take care having
 at least the lesser required extension disabled by commenting out it's
 loader line in your php.ini.
 
 Add following section to enable profiling:
 
 xdebug.profiler_enable = 1
 xdebug.profiler_output_dir = /tmp/profiler
-
-*****************************************************************************
+EOM
+}
+]
Index: head/devel/phabricator/files/pkg-message.in
===================================================================
--- head/devel/phabricator/files/pkg-message.in	(revision 508834)
+++ head/devel/phabricator/files/pkg-message.in	(revision 508835)
@@ -1,72 +1,78 @@
+[
+{ type: install
+  message: <<EOM
 To run the phabricator daemons from startup, add phd_enable="YES"
 to /etc/rc.conf. You can control the daemons using
 
 service phd start
 service phd stop
 etc.
 
 Before starting the daemons, please finish configuring your Phabricator
 instance. This involves configuring a web server (Apache, NGINX, LightHTTP)
 and a database server (MySQL, MariaDB). You can find detailed instructions
 on how to finish your setup at:
 
 https://secure.phabricator.com/book/phabricator/article/configuration_guide/
 
 Please note that all files are located in %%PREFIX%%/lib/php/phabricator,
 so if the documentation refers to ./bin, this means
 
   %%PREFIX%%/lib/php/phabricator/bin,
 
 if it refers to webroot, this means
 
   %%PREFIX%%/lib/php/phabricator/webroot.
 
 You might want to install textproc/py-pygments to improve syntax
 highlighting.
 
 Starting with version 20170630, phabricator daemons run as user www
 by default. If you're updating from a version before 20170630 you will need
 to fix permissions of /var/tmp/phd and repositories. Alternatively
 you can continue to run phabricator daemons as root by adding
 phd_user="root" to /etc/rc.conf.
 
 Phabricator daemons and ssh-git requires setting up sudo, see
 
   %%PREFIX%%lib/php/phabricator/resources/sshd/phabricator-sudoers.sample
 
 for an example.
 
 A phabricator example configuration installed here:
 
   %%PREFIX%%lib/php/phabricator/conf/local/local.json.sample
 
 Don't forget to update the database schema after update:
 
   service phd stop
   cd %%PREFIX%%/lib/php/phabricator
   ./bin/storage upgrade
   service phd start
 
 You also might want to stop the web server while upgrading the database.
 
 If you want to access phabricator hosted git repositories via git,
 you can add the following configuration snippet to /etc/sshd_config
 and reload sshd afterwards (`service sshd reload'):
 
 ========================================================================
 Match User git
  AllowUsers git
  AuthorizedKeysCommand %%PREFIX%%/lib/php/phabricator/resources/sshd/phabricator-ssh-hook.sh
  AuthorizedKeysCommandUser git
  AuthorizedKeysFile none
  AuthenticationMethods publickey
  PermitRootLogin no
  PasswordAuthentication no
  PermitTTY no
  AllowAgentForwarding no
  AllowTcpForwarding no
  GatewayPorts no
  PermitOpen none
  PermitTunnel no
  X11Forwarding no
 ========================================================================
+EOM
+}
+]
Index: head/devel/php-libawl/pkg-message
===================================================================
--- head/devel/php-libawl/pkg-message	(revision 508834)
+++ head/devel/php-libawl/pkg-message	(revision 508835)
@@ -1,7 +1,8 @@
-
-#########################################################
-
+[
+{ type: install
+  message: <<EOM
      you can customize the installation directory"
      by setting LIBAWLDIR in /etc/make.conf"
-
-#########################################################
+EOM
+}
+]
Index: head/devel/phpbt/files/pkg-message.in
===================================================================
--- head/devel/phpbt/files/pkg-message.in	(revision 508834)
+++ head/devel/phpbt/files/pkg-message.in	(revision 508835)
@@ -1,22 +1,24 @@
-==========================================================================
-
+[
+{ type: install
+  message: <<EOM
 FreeBSD phpBugTracker installation instructions:
 
 Optional: Install JpGraph (http://www.aditus.nu/jpgraph/) if you
 wish to use it.
 
 1. The phpBugTracker distribution has been installed in:
 
 	%%PREFIX%%/%%PHPBT%%
 
 2. With your web browser, surf to this location.  You will be
    presented with a web page that will help you configure and install
    the application.
 
 3. After completing the installation, login and start reporting bugs.
 
 * Note: You must have magic_quotes_gpc set to On either in php.ini
 or in .htaccess (see http://www.php.net/manual/en/configuration.php
 for more info).
-
-==========================================================================
+EOM
+}
+]
Index: head/devel/phpsh/pkg-message
===================================================================
--- head/devel/phpsh/pkg-message	(revision 508834)
+++ head/devel/phpsh/pkg-message	(revision 508835)
@@ -1,5 +1,7 @@
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 GEBEN functionality included in phpsh is not tested yet. Patches are welcome.
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/plasma/pkg-message
===================================================================
--- head/devel/plasma/pkg-message	(revision 508834)
+++ head/devel/plasma/pkg-message	(revision 508835)
@@ -1,11 +1,12 @@
-
-==============================================================================
-
+[
+{ type: install
+  message: <<EOM
 To use the visual mode (command 'v' in the interactive mode) the terminal must
 support 256 colors. 
 
 For xterm this can be enabled by
 
 export TERM=xterm-256color
-
-==============================================================================
+EOM
+}
+]
Index: head/devel/pmdk/pkg-message
===================================================================
--- head/devel/pmdk/pkg-message	(revision 508834)
+++ head/devel/pmdk/pkg-message	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 pmdk requires procfs(5). Add this line to your fstab(5):
 proc /proc procfs rw 0 0
+EOM
+}
+]
Index: head/devel/psvn/pkg-message
===================================================================
--- head/devel/psvn/pkg-message	(revision 508834)
+++ head/devel/psvn/pkg-message	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 To use psvn, add the following line to your ~/.emacs:
 
 (require 'psvn)
 
 Start the svn interface with `M-x svn-status'.
+EOM
+}
+]
Index: head/devel/py-QtPy/pkg-message
===================================================================
--- head/devel/py-QtPy/pkg-message	(revision 508834)
+++ head/devel/py-QtPy/pkg-message	(revision 508835)
@@ -1,10 +1,14 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You installed py-QtPy: the abstraction layer on top of Qt bindings.
 
 One of PyQt5, PyQt4, PySide2 or PySide bindings is required to be
 installed for it to work. py-QtPy will choose between the avaiable
 bindings, PyQt5 will be chosen first when available.
 
 The QT_API environment variable can be used to force a particular
 binding.
-======================================================================
+EOM
+}
+]
Index: head/devel/py-aspects/files/pkg-message.in
===================================================================
--- head/devel/py-aspects/files/pkg-message.in	(revision 508834)
+++ head/devel/py-aspects/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,11 @@
--------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 aspects is installed.
 
 For a quick start:
     - examples files are in PREFIX/share/examples/py-aspects/
     - import aspects for using the module
-
--------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/py-aspyct/pkg-message
===================================================================
--- head/devel/py-aspyct/pkg-message	(revision 508834)
+++ head/devel/py-aspyct/pkg-message	(revision 508835)
@@ -1,7 +1,11 @@
--------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 py-aspyct is installed.
 
 For a quick start:
     - import Aspyct for using this module
     - read http://www.aspyct.org/doku.php?id=aspyct-doc
--------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/py-gitosis/pkg-message
===================================================================
--- head/devel/py-gitosis/pkg-message	(revision 508834)
+++ head/devel/py-gitosis/pkg-message	(revision 508835)
@@ -1,5 +1,7 @@
-================================================================================
-
+[
+{ type: install
+  message: <<EOM
 For more information, see https://github.com/tv42/gitosis/blob/master/README.rst
-
-================================================================================
+EOM
+}
+]
Index: head/devel/py-http-prompt/files/pkg-message.in
===================================================================
--- head/devel/py-http-prompt/files/pkg-message.in	(revision 508834)
+++ head/devel/py-http-prompt/files/pkg-message.in	(revision 508835)
@@ -1,10 +1,14 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 For the output colors work properly you need to use LESS as your 
 default pager instead of MORE.
 
 zsh:
 $ export PAGER=less
 
 csh:
 $ setenv PAGER less
-======================================================================
+EOM
+}
+]
Index: head/devel/py-mercurialserver/files/pkg-message.in
===================================================================
--- head/devel/py-mercurialserver/files/pkg-message.in	(revision 508834)
+++ head/devel/py-mercurialserver/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 NOTE: %%PORTNAME%% has been patched to use %%PREFIX%%/etc/%%PORTNAME%%
       instead of /etc/mercurial-server
 
 Now you need to create %%HGUSER%% home (if nessacery) and run
       %%PREFIX%%/etc/hginit as %%HGUSER%% user from home directory
+EOM
+}
+]
Index: head/devel/py-os-brick/pkg-message
===================================================================
--- head/devel/py-os-brick/pkg-message	(revision 508834)
+++ head/devel/py-os-brick/pkg-message	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 Please note that this is a development version.
 Only initial NFS support was added.
 
 Enable NFS client in rc.conf
 # sysrc nfs_client_enable="YES"
+EOM
+}
+]

Property changes on: head/devel/py-os-brick/pkg-message
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/py-pip/pkg-message
===================================================================
--- head/devel/py-pip/pkg-message	(revision 508834)
+++ head/devel/py-pip/pkg-message	(revision 508835)
@@ -1,14 +1,16 @@
-============================== !!!! WARNING !!!! ==========================
-
+[
+{ type: install
+  message: <<EOM
 pip MUST ONLY be used:
 
  * With the --user flag, OR
  * To install or manage Python packages in virtual environments
 
 Failure to follow this warning can and will result in an inconsistent
 system-wide Python environment (LOCALBASE/lib/pythonX.Y/site-packages) and
 cause errors.
 
 Avoid using pip as root unless you know what you're doing.
-
-============================== !!!! WARNING !!!! ==========================
+EOM
+}
+]
Index: head/devel/py-python-gitlab/files/pkg-message.in
===================================================================
--- head/devel/py-python-gitlab/files/pkg-message.in	(revision 508834)
+++ head/devel/py-python-gitlab/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 Add %%PREFIX%%/etc/python-gitlab.cfg or ~/.python-gitlab.cfg
 
 See https://github.com/python-gitlab/python-gitlab/blob/master/docs/cli.rst
 for CLI configutation details
+EOM
+}
+]
Index: head/devel/py-q/files/pkg-message.in
===================================================================
--- head/devel/py-q/files/pkg-message.in	(revision 508834)
+++ head/devel/py-q/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 Instructions for using devel/py-q can be found in the supplied docs:
 
   %%DOCSDIR%%/README.md
 
 Or video http://pyvideo.org/video/1858/sunday-evening-lightning-talks#t=25m15
+EOM
+}
+]
Index: head/devel/py-setuptools/files/pkg-message.in
===================================================================
--- head/devel/py-setuptools/files/pkg-message.in	(revision 508834)
+++ head/devel/py-setuptools/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,8 @@
-
-*******************************************************************
-
+[
+{ type: install
+  message: <<EOM
   Only %%PREFIX%%/bin/easy_install-%%PYTHON_VER%% script has been installed
   since Python %%PYTHON_VER%% is not the default Python version.
-
-*******************************************************************
+EOM
+}
+]
Index: head/devel/py-ua_parser/files/pkg-message.in
===================================================================
--- head/devel/py-ua_parser/files/pkg-message.in	(revision 508834)
+++ head/devel/py-ua_parser/files/pkg-message.in	(revision 508835)
@@ -1,5 +1,9 @@
-
+[
+{ type: install
+  message: <<EOM
 To allow user_agent_parser python module to find regexes.yaml file,
 define UA_PARSER_YAML environment variable to point to
 %%LOCALBASE%%/share/ua_parser/regexes.yaml
-
+EOM
+}
+]
Index: head/devel/pycharm-ce/files/pkg-message.in
===================================================================
--- head/devel/pycharm-ce/files/pkg-message.in	(revision 508834)
+++ head/devel/pycharm-ce/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,14 @@
+[
+{ type: install
+  message: <<EOM
 There is experimental native (faster) file watching support which is
 disabled by default.  Currently there are problems with watching large
 trees.  To enable edit %%DATADIR%%/bin/idea.properties and append
 
       idea.filewatcher.disabled=false
       idea.filewatcher.executable.path=%%IDEA_HOME%%/bin/fsnotifier
 
 Only enable fsnotifier if your projects have < 600 files.
+EOM
+}
+]

Property changes on: head/devel/pycharm-ce/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/pymacs/pkg-message
===================================================================
--- head/devel/pymacs/pkg-message	(revision 508834)
+++ head/devel/pymacs/pkg-message	(revision 508835)
@@ -1,11 +1,17 @@
+[
+{ type: install
+  message: <<EOM
 Add the following to your emacs initialization file to enable pymacs:
 
 (autoload 'pymacs-apply "pymacs")
 (autoload 'pymacs-call "pymacs")
 (autoload 'pymacs-eval "pymacs" nil t)
 (autoload 'pymacs-exec "pymacs" nil t)
 (autoload 'pymacs-load "pymacs" nil t)
 (autoload 'pymacs-autoload "pymacs")
 
 See http://pymacs.progiciels-bpi.ca/pymacs.html for
 documentation on using pymacs.
+EOM
+}
+]
Index: head/devel/rbenv/pkg-message
===================================================================
--- head/devel/rbenv/pkg-message	(revision 508834)
+++ head/devel/rbenv/pkg-message	(revision 508835)
@@ -1,8 +1,10 @@
-**********************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Load rbenv automatically by appending
 the following to ~/.bash_profile:
 
    eval "$(rbenv init -)"
-
-**********************************************************************
+EOM
+}
+]
Index: head/devel/remotery/files/pkg-message.in
===================================================================
--- head/devel/remotery/files/pkg-message.in	(revision 508834)
+++ head/devel/remotery/files/pkg-message.in	(revision 508835)
@@ -1,13 +1,19 @@
+[
+{ type: install
+  message: <<EOM
 Compiling the sample program
 ============================
 
 sample.c can be compiled in the following way:
 
 cc -I%%PREFIX%%/include -pthread -lm %%DATADIR%%/Remotery.c %%EXAMPLESDIR%%/sample.c
 
 A precompiled sample program can be found at %%EXAMPLESDIR%%/sample.
 
 Using the Remote Web Viewer
 ===========================
 
 Open %%DATADIR%%/index.html in a web browser.
+EOM
+}
+]
Index: head/devel/rpm-spec-mode.el/pkg-message
===================================================================
--- head/devel/rpm-spec-mode.el/pkg-message	(revision 508834)
+++ head/devel/rpm-spec-mode.el/pkg-message	(revision 508835)
@@ -1,11 +1,12 @@
-
-===================================================================
-
+[
+{ type: install
+  message: <<EOM
 Put this in your .emacs file to enable autoloading of rpm-spec-mode,
 and auto-recognition of ".spec" files:
 
  (autoload 'rpm-spec-mode "rpm-spec-mode.el" "RPM spec mode." t)
  (setq auto-mode-alist (append '(("\\.spec" . rpm-spec-mode))
                                auto-mode-alist))
-
-===================================================================
+EOM
+}
+]
Index: head/devel/rth/files/pkg-message.in
===================================================================
--- head/devel/rth/files/pkg-message.in	(revision 508834)
+++ head/devel/rth/files/pkg-message.in	(revision 508835)
@@ -1,34 +1,38 @@
-
+[
+{ type: install
+  message: <<EOM
 %%PKGNAME%% has been installed into:
 
     %%PREFIX%%/www/rth
 
 Please edit api/properties_inc.php to suit your needs.
 
 If you use MySQL as your database go to the directory
 %%PREFIX%%/www/rth/sql and do the following to create
 a demo database:
 
   mysql -u [username] -p [db_name] < rth.sql
 
 If you are upgrading from a prior version of rth note
 update instructions at %%PREFIX%%/www/rth/sql.
 
 To make rth available through your web site, I suggest
 that you add something like the following to httpd.conf:
 
     Alias /rth/ "%%PREFIX%%/www/rth"
 
     <Directory "%%PREFIX%%/www/rth/">
         Options none
         AllowOverride Limit
 
         Order Deny,Allow
         Deny from all
         Allow from 127.0.0.1 .example.com
 
         <IfModule dir_module>
             DirectoryIndex home_page.php
         </IfModule>
     </Directory>
-
+EOM
+}
+]
Index: head/devel/sdl12/pkg-message.linjoy
===================================================================
--- head/devel/sdl12/pkg-message.linjoy	(revision 508834)
+++ head/devel/sdl12/pkg-message.linjoy	(revision 508835)
@@ -1,7 +1,8 @@
-
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
+[
+{ type: install
+  message: <<EOM
 Do not forget install webcamd with joystick support and run it,
 /dev/input/js* or /dev/input/event* device is required.
-
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+EOM
+}
+]
Index: head/devel/sdl12/pkg-message.vgl
===================================================================
--- head/devel/sdl12/pkg-message.vgl	(revision 508834)
+++ head/devel/sdl12/pkg-message.vgl	(revision 508835)
@@ -1,8 +1,12 @@
-------------------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
  Your SDL library has been built with libvgl support, which means that you
  can run almost any SDL application straight on your console (VESA 2.0
  compatible videocard is required).
 
  To do this you have to load the vesa kernel module or enable it in your
  kernel, and set environment variable "SDL_VIDEODRIVER=vgl".
-------------------------------------------------------------------------------
+EOM
+}
+]
Index: head/devel/sonar-ant-task/files/pkg-message.in
===================================================================
--- head/devel/sonar-ant-task/files/pkg-message.in	(revision 508834)
+++ head/devel/sonar-ant-task/files/pkg-message.in	(revision 508835)
@@ -1,13 +1,15 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
   To integrate SonarQube with SonarQube Scanner for Ant (default
   settings):
   - define a new sonar Ant target in your Ant build script
   - for the SonarQube target set classpath value to
    %%DATADIR%%/sonar-ant-task.jar
 
 
   More information:
   http://docs.sonarqube.org/display/SCAN/Analyzing+with+SonarQube+Scanner+for+Ant
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/sonar-scanner-cli/files/pkg-message.in
===================================================================
--- head/devel/sonar-scanner-cli/files/pkg-message.in	(revision 508834)
+++ head/devel/sonar-scanner-cli/files/pkg-message.in	(revision 508835)
@@ -1,10 +1,12 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
   Before start the SonarQube Scanner (default settings):
   - create a new SONAR_RUNNER_HOME environment variable set to
     "/usr/local/sonar-scanner-cli"
 
   More information:
   http://docs.sonarqube.org/display/SCAN/Analyzing+with+SonarQube+Scanner
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/sonarqube/files/pkg-message.in
===================================================================
--- head/devel/sonarqube/files/pkg-message.in	(revision 508834)
+++ head/devel/sonarqube/files/pkg-message.in	(revision 508835)
@@ -1,15 +1,17 @@
-************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 	Before start the SonarQube, prepare the Database and
 	the Web Server, when installing for the first time.
 
 	More information:
 	http://docs.sonarqube.org/display/SONAR/Installing
 
 	When upgrading the SonarQube, follow instructions:
 	http://docs.sonarqube.org/display/SONAR/Upgrading
 
 	To run the SonarQube from startup, add sonarqube_enable="YES"
 	in your /etc/rc.conf
-
-************************************************************************
+EOM
+}
+]
Index: head/devel/staf/pkg-message
===================================================================
--- head/devel/staf/pkg-message	(revision 508834)
+++ head/devel/staf/pkg-message	(revision 508835)
@@ -1,15 +1,17 @@
-=====================================================================
-
+[
+{ type: install
+  message: <<EOM
 STAFProc requires machine's hostname to be resolvable.
 
 If you haven't already, please add the following to /etc/hosts:
 
 	<IPv6 machine address or ::1>		<hostname>
 	<IPv4 machine address or 127.0.0.1>	<hostname>
 
 To verify do the following:
 
 	ping6 $(hostname)
 	ping  $(hostname)
-
-=====================================================================
+EOM
+}
+]
Index: head/devel/statcvs/files/pkg-message.in
===================================================================
--- head/devel/statcvs/files/pkg-message.in	(revision 508834)
+++ head/devel/statcvs/files/pkg-message.in	(revision 508835)
@@ -1,11 +1,15 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 You have just installed StatCVS, a CVS repository activity report
 generator.
 
 To use the tool, run the following command:
 
 java -jar %%DATADIR%%/statcvs.jar
 
 Full usage instructions and command options are found at:
 http://statcvs.sourceforge.net/manual.html
-======================================================================
+EOM
+}
+]
Index: head/devel/statsvn/pkg-message
===================================================================
--- head/devel/statsvn/pkg-message	(revision 508834)
+++ head/devel/statsvn/pkg-message	(revision 508835)
@@ -1 +1,7 @@
+[
+{ type: install
+  message: <<EOM
 Manual: https://wiki.statsvn.org/User%20Manual.ashx
+EOM
+}
+]
Index: head/devel/subversion/files/pkg-message.in
===================================================================
--- head/devel/subversion/files/pkg-message.in	(revision 508834)
+++ head/devel/subversion/files/pkg-message.in	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 The subversion dav modules are no longer activated in httpd.conf!
 There is now a dedicated modules file in %%APACHEETCDIR%%/modules.d
+EOM
+}
+]
Index: head/devel/subversion-lts/files/pkg-message.in
===================================================================
--- head/devel/subversion-lts/files/pkg-message.in	(revision 508834)
+++ head/devel/subversion-lts/files/pkg-message.in	(revision 508835)
@@ -1,2 +1,8 @@
+[
+{ type: install
+  message: <<EOM
 The subversion dav modules are no longer activated in httpd.conf!
 There is now a dedicated modules file in %%APACHEETCDIR%%/modules.d
+EOM
+}
+]
Index: head/devel/svntrac/pkg-message
===================================================================
--- head/devel/svntrac/pkg-message	(revision 508834)
+++ head/devel/svntrac/pkg-message	(revision 508835)
@@ -1,4 +1,9 @@
-
+[
+{ type: install
+  message: <<EOM
 Please follow the detailed installation instructions in the CVSTrac
 Wiki at http://www.cvstrac.org/cvstrac/wiki?p=SvnTrac for information
 on how to get SvnTrac up and running in your preferred configuration.
+EOM
+}
+]
Index: head/devel/tig/pkg-message-git
===================================================================
--- head/devel/tig/pkg-message-git	(revision 508834)
+++ head/devel/tig/pkg-message-git	(revision 508835)
@@ -1 +1,7 @@
+[
+{ type: install
+  message: <<EOM
 Required to (post-)install devel/git* port as runtime dependency.
+EOM
+}
+]
Index: head/devel/tigcc/files/pkg-message.in
===================================================================
--- head/devel/tigcc/files/pkg-message.in	(revision 508834)
+++ head/devel/tigcc/files/pkg-message.in	(revision 508835)
@@ -1,16 +1,20 @@
-	ATTENTION:
-
+[
+{ type: install
+  message: <<EOM
 TIGCC is now installed but in order for it
 to work you need to define some stuff.
 
 The TIGCC environment variable must point to
 the folder where TIGCC is installed.
 
 Additionally the TIGCC bin folder must be in the path.
 
 If you use the csh shell you would put something like
 
 setenv TIGCC	%%PREFIX%%/tigcc
 setenv PATH	$PATH:$TIGCC/bin
 
 into the .cshrc file in your home directory.
+EOM
+}
+]
Index: head/devel/tortoisehg/files/pkg-message.in
===================================================================
--- head/devel/tortoisehg/files/pkg-message.in	(revision 508834)
+++ head/devel/tortoisehg/files/pkg-message.in	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 It is recommended to %include TortoiseHG's mergetools.rc into your ~/.hgrc file,
 especially if you use textproc/kdiff3 as your merge tool:
 
 %include %%PREFIX%%/share/tortoisehg/mergetools.rc
+EOM
+}
+]
Index: head/devel/trac-bitten/files/pkg-message.in
===================================================================
--- head/devel/trac-bitten/files/pkg-message.in	(revision 508834)
+++ head/devel/trac-bitten/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,18 @@
+[
+{ type: install
+  message: <<EOM
 If your system is the build master, i.e. it is the system that runs
 the Trac instance and integrates with the SCM, you need to configure
 Trac to load the Bitten plugin and give permissions to the build
 slaves.
 
 To run a build slave (which can also be on the same host), you need
 to configure it by editing %%ETCDIR%%/bitten-slave.conf.
 It is recommended to use a password secured Trac instance and set
 username and password appropriately for the build slaves.
 
 For more detailed instructions please have a look at the documentation
 at http://bitten.edgewall.org/wiki/Documentation/install.html
+EOM
+}
+]
Index: head/devel/truc/files/pkg-message.in
===================================================================
--- head/devel/truc/files/pkg-message.in	(revision 508834)
+++ head/devel/truc/files/pkg-message.in	(revision 508835)
@@ -1,33 +1,37 @@
-
+[
+{ type: install
+  message: <<EOM
 %%PKGNAME%% has been installed into:
 
     %%PREFIX%%/www/truc
 
 If you use MySQL as your database go to the directory
 %%PREFIX%%/www/truc and do the following to create a
 demo database:
 
   mysql -u [username] -p [db_name] < database.sql
 
 To make truc available through your web site, I suggest
 that you add something like the following to httpd.conf:
 
     Alias /truc/ "%%PREFIX%%/www/truc"
 
     <Directory "%%PREFIX%%/www/truc/">
         Options none
         AllowOverride Limit
 
         Order Deny,Allow
         Deny from all
         Allow from 127.0.0.1 .example.com
 
         <IfModule dir_module>
             DirectoryIndex index.php
         </IfModule>
     </Directory>
 
 Point your browser to http://localhost/truc/, follow the
 instructions to create a config file and save it into
 truc's root directory.
-
+EOM
+}
+]
Index: head/devel/valgrind/pkg-message
===================================================================
--- head/devel/valgrind/pkg-message	(revision 508834)
+++ head/devel/valgrind/pkg-message	(revision 508835)
@@ -1,13 +1,15 @@
-==========================================================================
-
+[
+{ type: install
+  message: <<EOM
 	Known problems:
 	1) DRD/Helgrind tool gives excessive false-positivies for the
 	   internals of pthreads library.  This is now under
 	   investigation.
 	2) exp-ptrcheck tool doesn't work on FreeBSD now
 
 	If you'll encounter any problems when using Valgrind do not
 	hesitate to contact the maintainer with the description of
 	these problems.
-
-==========================================================================
+EOM
+}
+]
Index: head/devel/viewvc/files/pkg-message.in
===================================================================
--- head/devel/viewvc/files/pkg-message.in	(revision 508834)
+++ head/devel/viewvc/files/pkg-message.in	(revision 508835)
@@ -1,58 +1,60 @@
-*****************************************************************
-
+[
+{ type: install
+  message: <<EOM
  To use ViewVC, modify the configuration file located at
  %%PREFIX%%/viewvc/viewvc.conf.
 
  If no webserver was selected during installation, then
  a rc script for running ViewVC standalone is installed.
  To enable the standalone ViewVC server in rc.conf use
  parameter viewvc_enable="YES".
 
  You can also adjust the user which runs the ViewVC standalone
  server with the parameter "viewvc_user".
 
  If you want to run the ViewVC standalone server with another
  IP/PORT, use the parameter "viewvc_flags".
 
  To see all available parameters, use the command
  %%PREFIX%%/viewvc/bin/standalone.py --help
 
 
  To use ViewVC with Apache or lighttpd as a CGI script,
  see the following config examples.
 
  Example config lines for Apache 2.4
  ===================================
  <IfModule wsgi_module>
    WSGIRestrictSignal Off
  </IfModule>
 
  <IfModule !wsgi_module>
    ScriptAlias "/viewvc" "%%PREFIX%%/viewvc/bin/cgi/viewvc.cgi"
  </IfModule>
 
  <IfModule wsgi_module>
    WSGIScriptAlias "/viewvc" "%%PREFIX%%/viewvc/bin/wsgi/viewvc.wsgi"
  </IfModule>
 
  <Location /viewvc>
      Options NONE +ExecCGI
  </Location>
 
  Example config lines for lighttpd
  =================================
  server.modules = (
    "mod_alias",
    "mod_access"
  )
 
  alias.url += ( "/viewvc" => "%%PREFIX%%/viewvc/bin/cgi" )
 
  $HTTP["url"] =~ "^/viewvc/" {
    index-file.names  = ( "viewvc.cgi" )
      cgi.assign = (
        ".cgi" => "%%PYTHON_CMD%%",
      )
  }
-
-*****************************************************************
+EOM
+}
+]
Index: head/devel/visualparadigm/pkg-message
===================================================================
--- head/devel/visualparadigm/pkg-message	(revision 508834)
+++ head/devel/visualparadigm/pkg-message	(revision 508835)
@@ -1,4 +1,8 @@
-******************************************************************
+[
+{ type: install
+  message: <<EOM
 Visit http://www.visual-paradigm.com/ to get either a community or
 an enterprise license key
-******************************************************************
+EOM
+}
+]
Index: head/devel/websvn/files/pkg-message.in
===================================================================
--- head/devel/websvn/files/pkg-message.in	(revision 508834)
+++ head/devel/websvn/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,11 @@
-----------------------------------------------------
+[
+{ type: install
+  message: <<EOM
 To setup WebSVN, please edit the configuration file:
 %%WWWDIR%%/include/config.php
 
 and modify your web server's configuration to serve
 WebSVN actually!
-----------------------------------------------------
+EOM
+}
+]
Index: head/devel/xc3sprog/pkg-message
===================================================================
--- head/devel/xc3sprog/pkg-message	(revision 508834)
+++ head/devel/xc3sprog/pkg-message	(revision 508835)
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 Visit:
 
 	http://wiki.freebsd.org/FPGA/
 
 for FreeBSD-specific usage.
+EOM
+}
+]
Index: head/devel/youcompleteme/files/pkg-message.in
===================================================================
--- head/devel/youcompleteme/files/pkg-message.in	(revision 508834)
+++ head/devel/youcompleteme/files/pkg-message.in	(revision 508835)
@@ -1,9 +1,15 @@
+[
+{ type: install
+  message: <<EOM
 For JavaScript Semantic Completion:
 	cd %%VIMFILESDIR%%/third_party/ycmd/third_party/tern_runtime
 	pkg install npm
 	npm install --production
 
 For TypeScript Semantic Completion:
 	pkg install npm
 	npm install -g typescript
 
+EOM
+}
+]

Property changes on: head/devel/youcompleteme/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/devel/zanata-platform/pkg-message
===================================================================
--- head/devel/zanata-platform/pkg-message	(revision 508834)
+++ head/devel/zanata-platform/pkg-message	(revision 508835)
@@ -1,6 +1,8 @@
-================================================================================
-
+[
+{ type: install
+  message: <<EOM
 For installation instructions of devel/zanata-platform port, visit
 https://wiki.freebsd.org/Zanata/Install
-
-===============================================================================
+EOM
+}
+]
Index: head/devel/zeal/pkg-message
===================================================================
--- head/devel/zeal/pkg-message	(revision 508834)
+++ head/devel/zeal/pkg-message	(revision 508835)
@@ -1,7 +1,13 @@
+[
+{ type: install
+  message: <<EOM
 After installing Zeal, you need to download docsets.
 
 Go to Tools->Docsets, select the ones you want, and click the Download
 button.
 
 You can also create your own docsets by following these instructions:
 https://kapeli.com/docsets
+EOM
+}
+]
Index: head/dns/adsuck/files/pkg-message.in
===================================================================
--- head/dns/adsuck/files/pkg-message.in	(revision 508834)
+++ head/dns/adsuck/files/pkg-message.in	(revision 508835)
@@ -1,21 +1,23 @@
-
-
+[
+{ type: install
+  message: <<EOM
 Quick way to use adsuck chrooted in /var/adsuck
 
 mkdir /var/adsuck
 cp %%EXAMPLESDIR%%/* /var/adsuck
 
 # Adsuck forward to your old dns server
 cp /etc/resolv.conf /var/adsuck
 
 # Enable and start adsuck
 echo adsuck_enable=\"YES\" >> /etc/rc.conf
 /usr/local/etc/rc.d/adsuck start
 
 # Use adsuck as dns server
 echo "nameserver 127.0.0.1" > /etc/resolv.conf
 
 If you're using DHCP consider configuring your dhclient.conf(5) to prevent
 resolv.conf updates.
-
-
+EOM
+}
+]
Index: head/dns/bindgraph/pkg-message
===================================================================
--- head/dns/bindgraph/pkg-message	(revision 508834)
+++ head/dns/bindgraph/pkg-message	(revision 508835)
@@ -1,12 +1,18 @@
+[
+{ type: install
+  message: <<EOM
 To get bindgraph working, you have to set querylog for bind. An example
 named.conf will be
 
   logging {
     channel "querylog" {
       file "/var/log/query.log" versions 50 size 20m;
       print-time yes;
     };
     category queries { querylog; };
   };
 
 Make sure BINDGRAPH_USER (default www) can read this log file.
+EOM
+}
+]
Index: head/dns/checkdns/files/pkg-message.in
===================================================================
--- head/dns/checkdns/files/pkg-message.in	(revision 508834)
+++ head/dns/checkdns/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,12 @@
-   --------------------------------------------------------------------
-  |            >>> ATTENTION PLEASE <<<                                |
-  |                                                                    |
-  |   Please don't forget these :                                      |
-  |         - editing %%PREFIX%%/etc/checkdns.conf file !              |
-  |         - copying checkdns.css file to Html Output Directory !     |
-  |                                                                    |
-   --------------------------------------------------------------------
+[
+{ type: install
+  message: <<EOM
+              >>> ATTENTION PLEASE <<<
+
+     Please don't forget these :
+           - editing %%PREFIX%%/etc/checkdns.conf file !
+           - copying checkdns.css file to Html Output Directory !
+
+EOM
+}
+]
Index: head/dns/cli53/pkg-message
===================================================================
--- head/dns/cli53/pkg-message	(revision 508834)
+++ head/dns/cli53/pkg-message	(revision 508835)
@@ -1,19 +1,25 @@
+[
+{ type: install
+  message: <<EOM
 Please configure your AWS credentials, either through environment variables or
 ~/.aws/credentials config file.
 
 For example:
 
 export AWS_ACCESS_KEY_ID=XXXXXXXXXXXXXX
 export AWS_SECRET_ACCESS_KEY=XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
 
 or in ~/.aws/credentials (make sure you chmod 600 ~/.aws/credentials):
 
 [default]
 aws_access_key_id = AKID1234567890
 aws_secret_access_key = MY-SECRET-KEY
 
 You can switch between different sets in the credentials file by passing
 --profile to any command, or setting the environment variable AWS_PROFILE.
 
 For example:
     cli53 list --profile my_profile
+EOM
+}
+]
Index: head/dns/credns/pkg-message
===================================================================
--- head/dns/credns/pkg-message	(revision 508834)
+++ head/dns/credns/pkg-message	(revision 508835)
@@ -1,10 +1,12 @@
-**************************************************************************
-*                                                                        *
-*   To run credns from startup, add credns_enable="YES"                  *
-*   to your /etc/rc.conf                                                 *
-*                                                                        *
-*   Take good care when using credns commands, since they often need to  *
-*   be executed as user dedicated to credns, in order for the files it   *
-*   touches or creates to have the proper permissions.                   *
-*                                                                        *
-**************************************************************************
+[
+{ type: install
+  message: <<EOM
+   To run credns from startup, add credns_enable="YES"
+   to your /etc/rc.conf
+
+   Take good care when using credns commands, since they often need to
+   be executed as user dedicated to credns, in order for the files it
+   touches or creates to have the proper permissions.
+EOM
+}
+]
Index: head/dns/curvedns/files/pkg-message.in
===================================================================
--- head/dns/curvedns/files/pkg-message.in	(revision 508834)
+++ head/dns/curvedns/files/pkg-message.in	(revision 508835)
@@ -1,33 +1,35 @@
-###########################################################
-
+[
+{ type: install
+  message: <<EOM
  To start using curvedns, finish the following tasks:
 
 ------- generate/install keys -----------------------------
 
  curvedns-keygen %%PREFIX%%/etc/curvedns ns.example.net
 
 ------- configure -----------------------------------------
 
  $EDITOR %%PREFIX%%/etc/curvedns/run.sample
  # set user from "curvedns" to "bind" (required!),
  # adjust IP / port-numbers,
  # and save as %%PREFIX%%/etc/curvedns/run
 
  $EDITOR %%PREFIX%%/etc/curvedns/log/run.sample
  # set user from "curvedns" to "bind" (required!),
  # and save as %%PREFIX%%/etc/curvedns/log/run
 
 ------- prepare/startup -----------------------------------
 
  mkdir /var/service
  ln -s %%PREFIX%%/etc/curvedns /var/service
  echo svscan_enable=\"YES\" >> /etc/rc.conf
  %%PREFIX%%/etc/rc.d/svscan start
 
 ------- verify --------------------------------------------
 
  # examples:
  dig @<curvedns-ip> auth-dom.example any
  drill <curvedns-ip> auth-dom.example any
-
-###########################################################
+EOM
+}
+]
Index: head/dns/ddclient/files/pkg-message.in
===================================================================
--- head/dns/ddclient/files/pkg-message.in	(revision 508834)
+++ head/dns/ddclient/files/pkg-message.in	(revision 508835)
@@ -1,18 +1,20 @@
-***********************************************************
-
+[
+{ type: install
+  message: <<EOM
 To configure ddclient, edit the following file:
 
 	%%PREFIX%%/etc/ddclient.conf
 
 If you would like to run ddclient as a daemon add the
 following line to /etc/rc.conf
 
 	ddclient_enable="YES"
 
 If you would like to force ddclient to update your account
 daily regardless of IP changes add the following line to
 your /etc/periodic.conf
 
 	daily_ddclient_force_enable="YES"
-
-***********************************************************
+EOM
+}
+]
Index: head/dns/ddns/files/pkg-message.in
===================================================================
--- head/dns/ddns/files/pkg-message.in	(revision 508834)
+++ head/dns/ddns/files/pkg-message.in	(revision 508835)
@@ -1,41 +1,45 @@
-========================================================================
+[
+{ type: install
+  message: <<EOM
 ddns configuration files were installed in the following directory:
 
 	%%ETCDIR%%
 
 Before starting the server or the client you need to perform the
 following steps:
 
 1) Copy the appropriate sample configuration file as follows:
 
 	cp %%ETCDIR%%/ddns_server.conf.sample %%ETCDIR%%/ddns_server.conf
 
    or
 
 	cp %%ETCDIR%%/ddns_client.conf.sample %%ETCDIR%%/ddns_client.conf
 
 2) Edit ddns's configuration file to suit your needs:
 
 	$EDITOR %%ETCDIR%%/ddns_server.conf
 
    or
 
 	$EDITOR %%ETCDIR%%/ddns_client.conf
 
 3) Add the following line to your rc.conf:
 
 	ddns_server_enable="YES"
 
    or
 
 	ddns_client_enable="YES"
 
 
 Then you can start a ddns daemon by issuing the following command:
 
 	%%PREFIX%%/etc/rc.d/ddns_server start
 
     or
 
 	%%PREFIX%%/etc/rc.d/ddns_client start
-========================================================================
+EOM
+}
+]
Index: head/dns/dns2blackhole/pkg-message
===================================================================
--- head/dns/dns2blackhole/pkg-message	(revision 508834)
+++ head/dns/dns2blackhole/pkg-message	(revision 508835)
@@ -1,9 +1,11 @@
-########################################################################
-
+[
+{ type: install
+  message: <<EOM
                       dns2blackhole
 
    Malware Prevention through Domain Blocking (Black Hole)
 
    Issue "man dns2blackhole"  For configuration and usage information
-
-########################################################################
+EOM
+}
+]
Index: head/dns/dnscheckengine/files/pkg-message.in
===================================================================
--- head/dns/dnscheckengine/files/pkg-message.in	(revision 508834)
+++ head/dns/dnscheckengine/files/pkg-message.in	(revision 508835)
@@ -1,34 +1,36 @@
-*************************************************************************
-*	    _  _____ _____ _____ _   _ _____ ___ ___  _   _ 		*
-*	   / \|_   _|_   _| ____| \ | |_   _|_ _/ _ \| \ | |		*
-*	  / _ \ | |   | | |  _| |  \| | | |  | | | | |  \| |		*
-*	 / ___ \| |   | | | |___| |\  | | |  | | |_| | |\  |		*
-*	/_/   \_\_|   |_| |_____|_| \_| |_| |___\___/|_| \_|		*
-*                                                                       *
-*************************************************************************
+[
+{ type: install
+  message: <<EOM
+	   / \|_   _|_   _| ____| \ | |_   _|_ _/ _ \| \ | |
+	  / _ \ | |   | | |  _| |  \| | | |  | | | | |  \| |
+	 / ___ \| |   | | | |___| |\  | | |  | | |_| | |\  |
+	/_/   \_\_|   |_| |_____|_| \_| |_| |___\___/|_| \_|
 
 The DNSCheck software included in the port is the PERL-based engine and
 includes a command line utility that uses that engine in %%PREFIX%%/bin
 called dnscheckengine. There is some other software that is included
 that the developers at the .SE registry use to manage the process by
 which they do domain delegation. These generally require MYSQL support
 to work and are disabled by default. If you want to learn more about them,
 they are all PERL-based and have integrated perldoc information. However,
 I have not tested them extensively and can't advise on their suitability as of
 this writing. All the scripts install into %%PREFIX%%/libexec/dnscheck.
 
 This port also installs some documentation in %%DOCSDIR%%
 that may prove useful.
 
 There is also a webui that is available as an alternative frontend. I hope
 to include it in a future port.
 
 If you have questions about the basic software, please see the developer's
 web site at http://opensource.iis.se/dnscheck. If there is a problem with
 the port, please let me know at dnscheckengine-port@academ.com.
 
 Stan Barber
 Academ Consulting Services
 http://www.stanbarber.com
 http://www.academ.com
 
+EOM
+}
+]
Index: head/dns/dnscrypt-proxy2/files/pkg-message.in
===================================================================
--- head/dns/dnscrypt-proxy2/files/pkg-message.in	(revision 508834)
+++ head/dns/dnscrypt-proxy2/files/pkg-message.in	(revision 508835)
@@ -1,59 +1,63 @@
-======================================================================
+[
+{ type: install
+  message: <<EOM
 Version 2 of dnscrypt-proxy is written in Go and therefore isn't capable
 of dropping privileges after binding to a low port on FreeBSD.
 
 By default, this port's daemon will listen on port 5353 (TCP/UDP) as the
 %%USER%% user.
 
 It's possible to bind it and listen on port 53 (TCP/UDP) with mac_portacl(4)
 kernel module (network port access control policy). For this add
 dnscrypt_proxy_mac_portacl_enable=YES in your rc.conf. The dnscrypt-proxy
 startup script will load mac_portacl and add a rule where %%USER%% user will
 be able to bind on port 53 (TCP/UDP). This port can be changed by
 dnscrypt_proxy_mac_portacl_port variable in your rc.conf. You also need to
 change dnscrypt-proxy config file to use port 53.
 
 Below are a few examples on how to redirect local connections from port
 5353 to 53.
 
 [ipfw]
 
   ipfw nat 1 config if lo0 reset same_ports \
     redirect_port tcp 127.0.0.1:5353 53 \
     redirect_port udp 127.0.0.1:5353 53
   ipfw add nat 1 ip from any to 127.0.0.1 via lo0
 
   /etc/rc.conf:
     firewall_enable="YES"
     firewall_nat_enable="YES"
 
   /etc/sysctl.conf:
     net.inet.ip.fw.one_pass=0
 
 [pf]
 
   set skip on lo0
   rdr pass on lo0 proto { tcp udp } from any to port 53 -> 127.0.0.1 port 5353
 
   /etc/rc.conf:
     pf_enable="YES"
 
 [unbound]
 
   /etc/rc.conf:
     local_unbound_enable="YES"
 
   /var/unbound/unbound.conf:
     server:
       interface: 127.0.0.1
       do-not-query-localhost: no
 
   /var/unbound/forward.conf:
     forward-zone:
       name: "."
       forward-addr: 127.0.0.1@5353
 
   If you are using local_unbound, DNSSEC is enabled by default. You should
   comment the "auto-trust-anchor-file" line or change dnscrypt-proxy to use
   servers with DNSSEC support only.
-======================================================================
+EOM
+}
+]
Index: head/dns/dnsmasq/files/pkg-message.in
===================================================================
--- head/dns/dnsmasq/files/pkg-message.in	(revision 508834)
+++ head/dns/dnsmasq/files/pkg-message.in	(revision 508835)
@@ -1,14 +1,18 @@
+[
+{ type: install
+  message: <<EOM
+ To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and
+ set dnsmasq_enable="YES" in /etc/rc.conf[.local]
 
-*** To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and
-*** set dnsmasq_enable="YES" in /etc/rc.conf[.local]
-***
-*** Further options and actions are documented inside
-*** %%PREFIX%%/etc/rc.d/dnsmasq
+ Further options and actions are documented inside
+ %%PREFIX%%/etc/rc.d/dnsmasq
 
-*** SECURITY RECOMMENDATION
-*** ~~~~~~~~~~~~~~~~~~~~~~~
-*** It is recommended to enable the wpad-related options
-*** at the end of the configuration file (you may need to
-*** copy them from the example file to yours) to fix
-*** CERT Vulnerability VU#598349.
-
+ SECURITY RECOMMENDATION
+ ~~~~~~~~~~~~~~~~~~~~~~~
+ It is recommended to enable the wpad-related options
+ at the end of the configuration file (you may need to
+ copy them from the example file to yours) to fix
+ CERT Vulnerability VU#598349.
+EOM
+}
+]
Index: head/dns/dnsmasq-devel/files/pkg-message.in
===================================================================
--- head/dns/dnsmasq-devel/files/pkg-message.in	(revision 508834)
+++ head/dns/dnsmasq-devel/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,11 @@
+[
+{ type: install
+  message: <<EOM
+ To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and
+ set dnsmasq_enable="YES" in /etc/rc.conf[.local]
 
-*** To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and
-*** set dnsmasq_enable="YES" in /etc/rc.conf[.local]
-***
-*** Further options and actions are documented inside
-*** %%PREFIX%%/etc/rc.d/dnsmasq
-
+ Further options and actions are documented inside
+ %%PREFIX%%/etc/rc.d/dnsmasq
+EOM
+}
+]
Index: head/dns/dnsmax-perl/pkg-message
===================================================================
--- head/dns/dnsmax-perl/pkg-message	(revision 508834)
+++ head/dns/dnsmax-perl/pkg-message	(revision 508835)
@@ -1,12 +1,14 @@
-***************************************************************
-
+[
+{ type: install
+  message: <<EOM
 The DNSMax update client has been installed.  You will need
 a dynamic dns account from a DNSMax enabled provider.
 
 Providers:
 - www.dnsmax.com
 - www.thatip.com
 
 To set up your configuration, run dnsmax-perl
-
-***************************************************************
+EOM
+}
+]
Index: head/dns/dnsproxy/files/pkg-message.in
===================================================================
--- head/dns/dnsproxy/files/pkg-message.in	(revision 508834)
+++ head/dns/dnsproxy/files/pkg-message.in	(revision 508835)
@@ -1,14 +1,15 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 To enable dnsproxy you need:
 
 1) Enable dnsproxy in /etc/rc.conf with the following line:
    dnsproxy_enable="YES"
 
 2) Configuration template is available in %%ETCDIR%%/ as
    dnsproxy.conf.sample file.
 
 For more information see man dnsproxy(1)
-
-**********************************************************************
-
-
+EOM
+}
+]
Index: head/dns/dsc/files/pkg-message.in
===================================================================
--- head/dns/dsc/files/pkg-message.in	(revision 508834)
+++ head/dns/dsc/files/pkg-message.in	(revision 508835)
@@ -1,7 +1,9 @@
-###########################################
-
+[
+{ type: install
+  message: <<EOM
 Before you configure:
 To obtain MaxMind's GeoIP tables, install net/geoipupdate
 and run %%LOCALBASE%%/bin/geoipupdate manually.
-
-###########################################
+EOM
+}
+]
Index: head/dns/dynip/pkg-message
===================================================================
--- head/dns/dynip/pkg-message	(revision 508834)
+++ head/dns/dynip/pkg-message	(revision 508835)
@@ -1,9 +1,11 @@
-########################################################################
-
+[
+{ type: install
+  message: <<EOM
                       dynip
 
              Dynamic IP Address Updater
 
    Issue "man dynip"  For set up and usage information
-
-########################################################################
+EOM
+}
+]
Index: head/dns/gdnsd3/pkg-message
===================================================================
--- head/dns/gdnsd3/pkg-message	(revision 508834)
+++ head/dns/gdnsd3/pkg-message	(revision 508835)
@@ -1,28 +1,31 @@
-************************************************************************
+[
+{ type: install
+  message: <<EOM
 As of version 3.0.0, gdnsd no longer has the ability to bind to
 privileged ports and then drop privileges.  As a result, you must use
 mac_portacl to allow the gdnsd user to bind to 53 udp/tcp.
 
 Please execute the following commands to prep this system to run gdnsd:
 
 echo "# required for gdnsd3">>/boot/loader.conf.local
 echo 'mac_portacl_load="YES"' >>/boot/loader.conf.local
 echo 'accf_dns_load="YES"' >>/boot/loader.conf.local
 echo 'accf_data_load="YES"' >>/boot/loader.conf.local
 
 echo "# required for gdnsd3">>/etc/sysctl.conf.local
 echo "security.mac.portacl.suser_exempt=1">>/etc/sysctl.conf.local
 echo "security.mac.portacl.port_high=1023">>/etc/sysctl.conf.local
 echo "net.inet.ip.portrange.reservedlow=0">>/etc/sysctl.conf.local
 echo "net.inet.ip.portrange.reservedhigh=0">>/etc/sysctl.conf.local
 echo "security.mac.portacl.rules=uid:179:udp:53,uid:179:tcp:53">>/etc/sysctl.conf.local
 
 Then, either reboot or run the following commands to implement the above
 changes:
 
 kldload mac_portacl
 kldload accf_dns
 kldload accf_data
 service sysctl reload
-
-************************************************************************
+EOM
+}
+]
Index: head/dns/getdns/files/pkg-message.in
===================================================================
--- head/dns/getdns/files/pkg-message.in	(revision 508834)
+++ head/dns/getdns/files/pkg-message.in	(revision 508835)
@@ -1,12 +1,18 @@
-***
-***  !!! IMPORTANT !!!!  libgetdns needs a DNSSEC trust anchor!
-***
-***  For the library to be able to perform DNSSEC, the root
-***  trust anchor needs to be present in presentation format
-***  in the file:
-***     %%LOCALBASE%%/etc/unbound/root.key
-***
-***  We recomend using unbound-anchor to retrieve and install
-***  the root trust anchor like this:
-***     su -m unbound -c /usr/local/sbin/unbound-anchor
-***
+[
+{ type: install
+  message: <<EOM
+
+  !!! IMPORTANT !!!!  libgetdns needs a DNSSEC trust anchor!
+
+  For the library to be able to perform DNSSEC, the root
+  trust anchor needs to be present in presentation format
+  in the file:
+     %%LOCALBASE%%/etc/unbound/root.key
+
+  We recomend using unbound-anchor to retrieve and install
+  the root trust anchor like this:
+     su -m unbound -c /usr/local/sbin/unbound-anchor
+
+EOM
+}
+]
Index: head/dns/kadnode/pkg-message
===================================================================
--- head/dns/kadnode/pkg-message	(revision 508834)
+++ head/dns/kadnode/pkg-message	(revision 508835)
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 In order to resolve domains using kadnode all over the system, add this
 line to your /etc/nsswitch.conf:
 
 hosts: kadnode dns
 
 If the hosts line already exists, just add kadnode before the dns entry.
+EOM
+}
+]
Index: head/dns/knot-resolver/files/pkg-message.in
===================================================================
--- head/dns/knot-resolver/files/pkg-message.in	(revision 508834)
+++ head/dns/knot-resolver/files/pkg-message.in	(revision 508835)
@@ -1,13 +1,15 @@
-######################################################################
-
+[
+{ type: install
+  message: <<EOM
   Please consult the documentation:
    - man kresd
    - https://knot-resolver.readthedocs.io/
 
   To run as daemon see:
    - https://knot-resolver.readthedocs.io/en/latest/daemon.html
 
   If upgrading:
    - https://knot-resolver.readthedocs.io/en/stable/upgrading.html
-
-######################################################################
+EOM
+}
+]

Property changes on: head/dns/knot-resolver/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-ON
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/dns/knot2/files/pkg-message.in
===================================================================
--- head/dns/knot2/files/pkg-message.in	(revision 508834)
+++ head/dns/knot2/files/pkg-message.in	(revision 508835)
@@ -1,20 +1,21 @@
-################################################################################
-
+[
+{ type: install
+  message: <<EOM
   To start using Knot DNS, you should complete the following tasks:
 
     cp %%ETCDIR%%/knot.conf.sample %%ETCDIR%%/knot.conf
     $EDITOR %%ETCDIR%%/knot.conf
 
     sysrc knot_enable=YES
     sysrc knot_config=%%ETCDIR%%/knot.conf
     service knot start
 
   Please consult the documentation:
    - man knotd
    - https://www.knot-dns.cz/documentation/
 
   When upgrading from 2.4.x read:
    - https://www.knot-dns.cz/docs/2.5/html/migration.html#upgrade-2-4-x-to-2-5-x
-
-################################################################################
-
+EOM
+}
+]
Index: head/dns/mDNSResponder_nss/pkg-message
===================================================================
--- head/dns/mDNSResponder_nss/pkg-message	(revision 508834)
+++ head/dns/mDNSResponder_nss/pkg-message	(revision 508835)
@@ -1,6 +1,10 @@
-================================================================================
+[
+{ type: install
+  message: <<EOM
 To enable the mDNSResponder NSS module, update the hosts entry in
 /etc/nsswitch.conf by adding mdns, preferably between files and dns:
 
 hosts: files mdns dns
-================================================================================
+EOM
+}
+]
Index: head/dns/mdnsd/pkg-message
===================================================================
--- head/dns/mdnsd/pkg-message	(revision 508834)
+++ head/dns/mdnsd/pkg-message	(revision 508835)
@@ -1,4 +1,10 @@
+[
+{ type: install
+  message: <<EOM
 To use:
      mdnsd 'unique name' 12.34.56.78 80 '/optionalpath'
 For example:
      mdnsd audiotron 192.168.123.195 80 '/index.asp' &
+EOM
+}
+]
Index: head/dns/mydns/files/pkg-message.in
===================================================================
--- head/dns/mydns/files/pkg-message.in	(revision 508834)
+++ head/dns/mydns/files/pkg-message.in	(revision 508835)
@@ -1,14 +1,18 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 To get MyDNS working you will need to do some configuration, first you
 will need to create %%PREFIX%%/etc/mydns.conf based on the
 installed sample file. Following that you will need to setup your
 database tables, you can use the output of
 
  %%PREFIX%%/sbin/mydns --create-tables
 
 as a template. Finally enable MyDNS by adding
 
  mydns_enable="YES"
 
 into your rc.conf.
-*********************************************************************
+EOM
+}
+]
Index: head/dns/mydns-ng/files/pkg-message.in
===================================================================
--- head/dns/mydns-ng/files/pkg-message.in	(revision 508834)
+++ head/dns/mydns-ng/files/pkg-message.in	(revision 508835)
@@ -1,21 +1,24 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 To get MyDNS working you will need to do some configuration, first you
 will need to create %%PREFIX%%/etc/mydns.conf based on the
 installed sample file. Following that you will need to setup your
 database tables, you can use the output of
 
  %%PREFIX%%/sbin/mydns --create-tables
 
 as a template. Finally enable MyDNS by adding
 
  mydns_enable="YES"
 
 into your rc.conf.
 
 You can use %%DOCSDIR%%/contrib/admin.php to maintain MyDNS.
 
 If you are looking for the web interface for MyDNS, it's included in
 the MyDNS distribution as %%DOCSDIR%%/contrib/admin.php.
 See %%DOCSDIR%%/contrib/README for installation instructions.
-
-*********************************************************************
+EOM
+}
+]
Index: head/dns/noip/files/pkg-message.in
===================================================================
--- head/dns/noip/files/pkg-message.in	(revision 508834)
+++ head/dns/noip/files/pkg-message.in	(revision 508835)
@@ -1,30 +1,34 @@
-###########################################################
+[
+{ type: install
+  message: <<EOM
 You must have a registered host with No-IP (www.noip.com)
 to use the noip Dynamic DNS Update Client (DUC).
 
 You must also create the noip config file
 /usr/local/etc/no-ip2.conf before using noip. To create the
 configuration file, run as root:
 
 /usr/local/bin/noip2 -C
 
 You will be prompted to enter the Ethernet port that will be
 associated with the host, your No-IP account name and
 password, and the hostname you have registered with No-IP.
 Your No-IP username and password are not stored, the
 config file contains a unique key for the DUC to access the
 No-IP DDNS service and only root has read permission.
 
 If you are compiling from source using the ports tree, you
 can also “make conf” to create the config file.
 
 To run noip automatically at boot, add the following line
 to /etc/rc.conf
 
 noip_enable="YES"
 
 Refer to the following for more information:
 
 /usr/local/bin/noip2 --help
 /usr/local/share/doc/noip/README.FIRST
-###########################################################
+EOM
+}
+]
Index: head/dns/nsd/pkg-message
===================================================================
--- head/dns/nsd/pkg-message	(revision 508834)
+++ head/dns/nsd/pkg-message	(revision 508835)
@@ -1,12 +1,14 @@
-**************************************************************************
-*
-*   To run nsd from startup, add nsd_enable="YES" to your etc/rc.conf
-*
-*   Starting with nsd version 4 the old nsdc control program has been
-*   replaced by nsd-control. This requires some manual setup with
-*   nsd-control-setup and editing of the config files.
-*
-*   nsd-control is incompatible with nsdc so when that is used in scripts,
-*   these should be adapted
-*
-**************************************************************************
+[
+{ type: install
+  message: <<EOM
+   To run nsd from startup, add nsd_enable="YES" to your etc/rc.conf
+
+   Starting with nsd version 4 the old nsdc control program has been
+   replaced by nsd-control. This requires some manual setup with
+   nsd-control-setup and editing of the config files.
+
+   nsd-control is incompatible with nsdc so when that is used in scripts,
+   these should be adapted
+EOM
+}
+]
Index: head/dns/opendnssec2/files/pkg-message.in
===================================================================
--- head/dns/opendnssec2/files/pkg-message.in	(revision 508834)
+++ head/dns/opendnssec2/files/pkg-message.in	(revision 508835)
@@ -1,27 +1,31 @@
-######
-# A manual migration step is needed to migration from 1.4 to 2.0.
-#
-# First migrate to at least the 1.4.10 release if you have not already done
-# so.
-#
-# Review the documentation on the OpenDNSSEC site.  This can be
-# updated in between releases to provide more help.  Especially if
-# you have tooling around OpenDNSSEC you should be aware that some
-# command line utilities have changed.  A fair amount of backward
-# compatibility has been respected, but changes are present.
-# 
-# The enforcer does require a full migration, as the internal database has
-# been completely revised.  See the documentation in 
-# %%DOCSDIR%%/1.4-2.0_db_convert/README.md for a description.
-# 
-# Migration scripts are installed in %%DOCSDIR%%.
-#
-# The signer does not require any migration.  Backward compatibility is
-# respected from earlier 1.4 release.  The signer should not require a
-# full resign of your zone when upgrading, however if you decide to downgrade
-# a full resign is required.
-######
+[
+{ type: install
+  message: <<EOM
+ A manual migration step is needed to migration from 1.4 to 2.0.
 
+ First migrate to at least the 1.4.10 release if you have not already done
+ so.
+
+ Review the documentation on the OpenDNSSEC site.  This can be
+ updated in between releases to provide more help.  Especially if
+ you have tooling around OpenDNSSEC you should be aware that some
+ command line utilities have changed.  A fair amount of backward
+ compatibility has been respected, but changes are present.
+ 
+ The enforcer does require a full migration, as the internal database has
+ been completely revised.  See the documentation in 
+ %%DOCSDIR%%/1.4-2.0_db_convert/README.md for a description.
+ 
+ Migration scripts are installed in %%DOCSDIR%%.
+
+ The signer does not require any migration.  Backward compatibility is
+ respected from earlier 1.4 release.  The signer should not require a
+ full resign of your zone when upgrading, however if you decide to downgrade
+ a full resign is required.
+
 An HowTo is provided at
 <https://wiki.opendnssec.org/display/DOCS20/Quick+start+guide>
 
+EOM
+}
+]

Property changes on: head/dns/opendnssec2/files/pkg-message.in
___________________________________________________________________
Modified: fbsd:nokeywords
## -1 +1 ##
-on
\ No newline at end of property
+yes
\ No newline at end of property
Index: head/dns/openresolv/files/pkg-message.in
===================================================================
--- head/dns/openresolv/files/pkg-message.in	(revision 508834)
+++ head/dns/openresolv/files/pkg-message.in	(revision 508835)
@@ -1,8 +1,9 @@
-=================================================
-
+[
+{ type: install
+  message: <<EOM
 To make sure openresolv runs correctly
 please symlink /etc/resolv.conf to
 %%PREFIX%%/etc/resolvconf/run/resolv.conf
-
-=================================================
-
+EOM
+}
+]
Index: head/dns/powerdns/files/pkg-message.in
===================================================================
--- head/dns/powerdns/files/pkg-message.in	(revision 508834)
+++ head/dns/powerdns/files/pkg-message.in	(revision 508835)
@@ -1,20 +1,26 @@
-
-*******************************************************************
+[
+{ type: install
+  message: <<EOM
  Enable powerdns in /etc/rc.conf with the following line:
 
     pdns_enable="YES"
 
  A configuration template is available in %%PREFIX%%/etc/pdns
  as pdns.conf-dist.
 
  A pdns.conf with all possible options is available in
  %%EXAMPLESDIR%%
-
+EOM
+}
+{ type: upgrade
+  maximum_versio: 3.4
+  message: <<EOM
  ---------------------------------------------
  IMPORTANT: PowerDNS Authoritive Server 3.4.0+:
  ---------------------------------------------
  This version needs a mandatory schema change for the gmsyql,
  gpgsql and gsqlite3 backends. SQL statements are available in
  %%DOCSDIR%% or http://doc.powerdns.com
-*******************************************************************
-
+EOM
+}
+]
Index: head/dns/powerdns-recursor/files/pkg-message.in
===================================================================
--- head/dns/powerdns-recursor/files/pkg-message.in	(revision 508834)
+++ head/dns/powerdns-recursor/files/pkg-message.in	(revision 508835)
@@ -1,11 +1,13 @@
-
-*******************************************************************
+[
+{ type: install
+  message: <<EOM
  If you want to use the powerdns recursor,
  you need the following line in /etc/rc.conf(.local)
 
     pdns_recursor_enable="YES"
 
  Configuration templates are available in %%PREFIX%%/etc/pdns
  as recursor.conf-dist.
-*******************************************************************
-
+EOM
+}
+]
Index: head/dns/radns/files/pkg-message.in
===================================================================
--- head/dns/radns/files/pkg-message.in	(revision 508834)
+++ head/dns/radns/files/pkg-message.in	(revision 508835)
@@ -1,13 +1,15 @@
-****************************************************
-
+[
+{ type: install
+  message: <<EOM
 To enable radns, edit /etc/rc.conf and add:
 
   radns_enable="YES"
 
 radns won't touch your system's /etc/resolv.conf. It will write to its
 own file %%PREFIX%%/etc/radns/radns-resolv.conf.
 
 To make sure the system's /etc/resolv.conf file is created from all
 sources, read %%PREFIX%%/share/doc/radns/README.FreeBSD.
-
-****************************************************
+EOM
+}
+]
Index: head/dns/rbldnsd/files/pkg-message.in
===================================================================
--- head/dns/rbldnsd/files/pkg-message.in	(revision 508834)
+++ head/dns/rbldnsd/files/pkg-message.in	(revision 508835)
@@ -1,17 +1,19 @@
-========================================================================
-
+[
+{ type: install
+  message: <<EOM
 The rbldnsd port has been installed with an example zone file, located
 in %%PREFIX%%/etc/rbldnsd/.
 
 After starting the daemon with this example data, you should be able to
 test the success of your install with the command:
 
 	% host -a 1.1.31.172.bl.example.com. localhost
 or
 	% dig @localhost 1.1.31.172.bl.example.com. any
 or
 	% nslookup -query=any 1.1.31.172.bl.example.com. localhost
 
 If you see a response that mentions 127.0.0.2, the install worked!
-
-========================================================================
+EOM
+}
+]
Index: head/dns/sleuth/pkg-message
===================================================================
--- head/dns/sleuth/pkg-message	(revision 508834)
+++ head/dns/sleuth/pkg-message	(revision 508835)
@@ -1,7 +1,9 @@
-============================================================
-
+[
+{ type: install
+  message: <<EOM
 Before you can run "sleuth" you will need to copy
 
 ${PREFIX}etc/sleuth.conf.sample to ${PREFIX}etc/sleuth.conf
-
-============================================================
+EOM
+}
+]
Index: head/dns/unbound/files/pkg-message.in
===================================================================
--- head/dns/unbound/files/pkg-message.in	(revision 508834)
+++ head/dns/unbound/files/pkg-message.in	(revision 508835)
@@ -1,10 +1,16 @@
+[
+{ type: install
+  message: <<EOM
 Munin support requires additional configuration in the plugin config file:
 %%PREFIX%%/etc/munin/plugin-conf.d/plugins.conf
 
 [unbound*]
 user root
 env.statefile %%PREFIX%%/var/munin/plugin-state/unbound-state
 env.unbound_conf %%PREFIX%%/etc/unbound/unbound.conf
 env.unbound_control %%PREFIX%%/sbin/unbound-control
 env.spoof_warn 1000
 env.spoof_crit 100000
+EOM
+}
+]
Index: head/dns/void-zones-tools/files/pkg-message.in
===================================================================
--- head/dns/void-zones-tools/files/pkg-message.in	(revision 508834)
+++ head/dns/void-zones-tools/files/pkg-message.in	(revision 508835)
@@ -1,16 +1,22 @@
+[
+{ type: install
+  message: <<EOM
 To download the host lists and convert them to void zones,
 run the following script:
 %%PREFIX%%/bin/void-zones-update.sh
 
 To add your own white list/black list entries, to add over override
 the bundled listings, edit %%PREFIX%%/etc/void-zones/my_void_hosts.txt.
 Use the IP address 1.1.1.1 for whitelisting, and 0.0.0.0 for blacklisting.
 
 Add the following line to your unbound.conf, prior to any forwarder directives:
 include: /var/unbound/local-void.zones
 Then restart Unbound.
 
 For future updates, run void-zones-update.sh and restart Unbound.
 
 For more information, see %%PREFIX%%/share/doc/void-zones-tools/README.md
 or https://github.com/cyclaero/void-zones-tools
+EOM
+}
+]