Index: branches/2019Q3/mail/exim/Makefile =================================================================== --- branches/2019Q3/mail/exim/Makefile (revision 507319) +++ branches/2019Q3/mail/exim/Makefile (revision 507320) @@ -1,635 +1,634 @@ # Created by: markm@FreeBSD.org # $FreeBSD$ PORTNAME= exim PORTVERSION?= ${EXIM_VERSION} -PORTREVISION= 4 CATEGORIES= mail ipv6 MASTER_SITES= EXIM:exim MASTER_SITE_SUBDIR= /exim4/:exim \ /exim4/old/:exim DISTNAME= ${PORTNAME}-${EXIM_VERSION} DISTFILES= ${DISTNAME}${EXTRACT_SUFX}:exim DIST_SUBDIR= exim EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX} MAINTAINER= vsevolod@FreeBSD.org COMMENT?= High performance MTA for Unix systems on the Internet LICENSE= GPLv2 USES= compiler cpe tar:bzip2 perl5 USE_PERL5= run # Exim build system is job unsafe atm MAKE_JOBS_UNSAFE= yes # One can tune the following "hidden" knobs: # - EXIM_USER: user exim is running as; # - EXIM_GROUP: ditto for the group; # - LOGDIR: where Exim logs will be put; # - LOG_FILE_PATH: path where '%s' will be substituted with # the target name (main, reject, etc); # - CONFIG_FILE_PATH: path to the default configuration file; # - ALT_CONFIG_PREFIX: path to the default prefix for all # configuration files, excluding the main one; # will be effective only when WITH_ALT_CONFIG_PREFIX # will be set via OPTIONS. .if make(makesum) && !defined(FETCH_ALL) .error "You forgot to define FETCH_ALL to create the sane distinfo" .endif .include "options" OPTIONS_SUB= yes AUTH_SASL_LIB_DEPENDS= libsasl2.so:security/cyrus-sasl2 BDB_USES= bdb DMARC_LIB_DEPENDS= libopendmarc.so:mail/opendmarc EMBEDDED_PERL_USE= perl5=run,build EXIMON_USE= xorg=x11,xaw,xt GNUTLS_LIB_DEPENDS= libgnutls.so:security/gnutls ICONV_USES= iconv:lib,build INTERNATIONAL_LIB_DEPENDS= libidn.so:dns/libidn LMDB_LIB_DEPENDS= liblmdb.so:databases/lmdb MYSQL_USE= mysql=yes OPENLDAP_USE= openldap=yes PGSQL_USES= pgsql REDIS_LIB_DEPENDS= libhiredis.so:databases/hiredis SASLAUTHD_RUN_DEPENDS= ${LOCALBASE}/sbin/saslauthd:security/cyrus-sasl2-saslauthd SA_EXIM_RUN_DEPENDS= ${LOCALBASE}/bin/spamc:mail/spamassassin SPF_LIB_DEPENDS= libspf2.so:mail/libspf2 SQLITE_USES= pkgconfig sqlite .include # OCSP is supported for openssl only .if ${PORT_OPTIONS:MOCSP} .if ! ${PORT_OPTIONS:MTLS} IGNORE= you cannot enable OCSP stapling without TLS support .elif ${PORT_OPTIONS:MGNUTLS} IGNORE= you cannot enable OCSP stapling with gnutls .endif .endif # DMARC implies SPF and DKIM .if ${PORT_OPTIONS:MDMARC} .if ! ${PORT_OPTIONS:MSPF} || ! ${PORT_OPTIONS:MDKIM} IGNORE= you cannot enable DMARC without SPF and DKIM support .endif .endif # ARC implies SPF and DKIM .if ${PORT_OPTIONS:MARC} .if ! ${PORT_OPTIONS:MSPF} || ! ${PORT_OPTIONS:MDKIM} IGNORE= you cannot enable ARC without SPF and DKIM support .endif .endif # DANE implies DNSSEC .if ${PORT_OPTIONS:MDANE} .if ! ${PORT_OPTIONS:MDNSSEC} || ! ${PORT_OPTIONS:MTLS} IGNORE= you cannot enable DANE without DNSSEC support or without TLS support .endif .endif .if ${PORT_OPTIONS:MSA_EXIM} || defined(FETCH_ALL) MASTER_SITES+= http://marc.merlins.org/linux/exim/files/:sa_exim \ SF/sa-exim/sa-exim/${SA_EXIM_VERSION}:sa_exim DISTFILES+= sa-exim-${SA_EXIM_VERSION}.tar.gz:sa_exim .endif -EXIM_VERSION= 4.92 +EXIM_VERSION= 4.92.1 SA_EXIM_VERSION=4.2 EXIM_INSTALL_ARG+= "-no_chown" "-no_symlink" .if !defined(EXIMON_ONLY) PLIST_SUB+= EXIM="" .if defined(PKGNAMESUFFIX) CONFLICTS+= ${PKGNAMEPREFIX}${PORTNAME}-4.* .endif .for suffix in -ldap2 -mysql -postgresql -sa-exim -sqlite .if !defined(PKGNAMESUFFIX) || ${PKGNAMESUFFIX} != ${suffix} CONFLICTS+= ${PKGNAMEPREFIX}${PORTNAME}${suffix}-4.* .endif .endfor .if ${PORT_OPTIONS:MEXIMON} CONFLICTS+= ${PKGNAMEPREFIX}${PORTNAME}-monitor-4.* .endif PKGMESSAGE= ${WRKDIR}/POST-INSTALL-NOTES .else # !EXIMON_ONLY PLIST_SUB+= EXIM="@comment " PORT_OPTIONS+= EXIMON PKGMESSAGE= ${WRKDIR}/pkg-message EXIM_INSTALL_ARG+= "eximon" "eximon.bin" .endif # !EXIMON_ONLY PORTDOC_BASE= ACKNOWLEDGMENTS NOTICE README.UPDATING PORTDOC_FILES= ChangeLog Exim3.upgrade Exim4.upgrade NewStuff \ OptionLists.txt README README.SIEVE dbm.discuss.txt \ experimental-spec.txt filter.txt spec.txt PORT_EXAMPLES= convert4r3 convert4r4 transport-filter.pl DAILY_SCRIPTS= 150.exim-tidydb 460.exim-mail-rejects MAKE_ENV+= OSTYPE="${OPSYS}" ARCHTYPE="${ARCH}" DUMMY_LDFLAGS="${DUMMY_LDFLAGS}" STRIP_COMMAND="${STRIP_CMD}" EXIM_USER?= mailnull EXIM_GROUP?= mail # Default user/group are system ones, so we don't want to check them .if ${EXIM_USER} != "mailnull" USERS= ${EXIM_USER} .endif .if ${EXIM_GROUP} != "mail" GROUPS= ${EXIM_GROUP} .endif LOGDIR?= /var/log/exim LOG_FILE_PATH?= ${LOGDIR}/%slog CONFIG_FILE_PATH?= ${PREFIX}/etc/exim/configure ALT_CONFIG_PREFIX?= ${PREFIX}/etc/exim/ EXIM_DYNAMIC_LDFLAGS= -fPIC -rdynamic -Wl,--export-dynamic SED_SCRIPT= -e 's,%%PREFIX%%,${PREFIX},g' \ -e 's,%%DOCSDIR%%,${DOCSDIR},g' \ -e 's,%%EXAMPLESDIR%%,${EXAMPLESDIR},g' \ -e 's,%%EXIM_USER%%,${EXIM_USER},g' \ -e 's,%%EXIM_GROUP%%,${EXIM_GROUP},g' \ -e 's,%%LOGDIR%%,${LOGDIR},g' SEDLIST+= -e 's,XX_CFLAGS_XX,${CFLAGS:S/,/\\,/g},' \ -e 's,XX_PREFIX_XX,${PREFIX:S/,/\\,/g},' \ -e 's,XX_LOCALBASE_XX,${LOCALBASE:S/,/\\,/g},' \ -e 's,XX_LOG_FILE_PATH_XX,${LOG_FILE_PATH:S/,/\\,/g},' \ -e 's,XX_CONFIG_FILE_PATH_XX,${CONFIG_FILE_PATH:S/,/\\,/g},' \ -e 's,XX_ALT_CONFIG_PREFIX_XX,${ALT_CONFIG_PREFIX:S/,/\\,/g},' \ -e 's,XX_EXIM_USER_XX,${EXIM_USER:S/,/\\,/g},' \ -e 's,XX_EXIM_GROUP_XX,${EXIM_GROUP:S/,/\\,/g},' \ -e 's,XX_DEFAULT_CHARSET_XX,${WITH_DEFAULT_CHARSET:S/,/\\,/g},' \ -e 's,XX_DYNAMIC_LDFLAGS_XX,${EXIM_DYNAMIC_LDFLAGS:S/,/\\,/g},' PLIST_SUB+= EXIM_VERSION="${EXIM_VERSION}-${PORTREVISION}" \ EXIM_USER=${EXIM_USER} \ EXIM_GROUP=${EXIM_GROUP} \ LOGDIR="${LOGDIR:S/^\///}" # Exim refuses to run local deliveries as root by default. You can # add other users to this colon-separated list that cannot be # overridden at runtime below, but are advised not to remove "root". #WITH_FIXED_NEVER_USERS= root:daemon:bin # When Exim is decoding MIME "words" in header lines it converts any foreign # character sets to the one that is set in the headers_charset option. # The default setting is defined by this setting: WITH_DEFAULT_CHARSET?= ISO-8859-1 # You should not need to fiddle with anything below this point. LIB_DEPENDS+= libpcre.so:devel/pcre .if ! ${PORT_OPTIONS:MDKIM} SEDLIST+= -e 's,^\# (DISABLE_DKIM=),\1,' .endif .if ${PORT_OPTIONS:MLISTMATCH_RHS} SEDLIST+= -e 's,^\# (EXPAND_LISTMATCH_RHS=),\1,' .endif .if ${PORT_OPTIONS:MDCC} SEDLIST+= -e 's,^\# (EXPERIMENTAL_DCC=),\1,' .endif .if ${PORT_OPTIONS:MPROXY} SEDLIST+= -e 's,^\# (SUPPORT_PROXY=),\1,' .endif .if ${PORT_OPTIONS:MCERTNAMES} SEDLIST+= -e 's,^\# (EXPERIMENTAL_CERTNAMES=),\1,' .endif .if ${PORT_OPTIONS:MDSN} SEDLIST+= -e 's,^\# (EXPERIMENTAL_DSN=),\1,' .endif .if ${PORT_OPTIONS:MDANE} SEDLIST+= -e 's,^\# (SUPPORT_DANE=),\1,' .endif .if ${PORT_OPTIONS:MARC} SEDLIST+= -e 's,^\# (EXPERIMENTAL_ARC=),\1,' .endif .if !${PORT_OPTIONS:MEVENT} SEDLIST+= -e 's,^\# (DISABLE_EVENT=),\1,' .endif .if ${PORT_OPTIONS:MINTERNATIONAL} SEDLIST+= -e 's,^\# (SUPPORT_I18N=),\1,' \ -e 's,XX_IDN_LIBS_XX,-L${LOCALBASE}/lib -lidn,' .else SEDLIST+= -e 's,XX_IDN_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MSOCKS} SEDLIST+= -e 's,^\# (SUPPORT_SOCKS=),\1,' .endif .if !${PORT_OPTIONS:MPRDR} SEDLIST+= -e 's,^\# (DISABLE_PRDR=),\1,' .endif .if !${PORT_OPTIONS:MOCSP} SEDLIST+= -e 's,^\# (DISABLE_OCSP=),\1,' .endif .if !${PORT_OPTIONS:MDNSSEC} SEDLIST+= -e 's,^\# (DISABLE_DNSSEC=),\1,' .endif .if ${PORT_OPTIONS:MDMARC} SEDLIST+= -e 's,XX_DMARC_LIBS_XX,-L${LOCALBASE}/lib -lopendmarc,' \ -e 's,^\# (EXPERIMENTAL_DMARC=),\1,' .else SEDLIST+= -e 's,XX_DMARC_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MWISHLIST} EXTRA_PATCHES+= `${FIND} ${PATCHDIR} -name 'wishlist-*.patch'` .endif .if ${PORT_OPTIONS:MFIXED_NEVER_USERS} SEDLIST+= -e 's,^(FIXED_NEVER_USERS=).*,\1${WITH_FIXED_NEVER_USERS:S/,/\\,/g},' .endif .if ${PORT_OPTIONS:MEXIMON} SEDLIST+= -e 's,^\# (EXIM_MONITOR=),\1,' .endif .if ${PORT_OPTIONS:MTLS} SEDLIST+= -e 's,^\# (SUPPORT_TLS=),\1,' .if ! ${PORT_OPTIONS:MGNUTLS} USES+= ssl SEDLIST+= -e 's,^\# (TLS_LIBS=.*-lssl[[:space:]]),\1,' .else SEDLIST+= -e 's,^\# (USE_GNUTLS=),\1,' SEDLIST+= -e 's,^\# (TLS_LIBS=.*-lgnutls[[:space:]]),\1,' .endif .endif .if ${PORT_OPTIONS:MEMBEDDED_PERL} SEDLIST+= -e 's,^\# (EXIM_PERL=),\1,' .endif .if ${PORT_OPTIONS:MTCP_WRAPPERS} SEDLIST+= -e 's,XX_TCP_WRAPPERS_LIBS_XX,-lwrap,' \ -e 's,^\# (USE_TCP_WRAPPERS=),\1,' .else SEDLIST+= -e 's,XX_TCP_WRAPPERS_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MICONV} SEDLIST+= -e 's,XX_ICONV_LIBS_XX,-L${LOCALBASE:S/,/\\,/g}/lib ${ICONV_LIB},' \ -e 's,^\# (HAVE_ICONV=),\1,' .else SEDLIST+= -e 's,XX_ICONV_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MOPENLDAP_VER} && ${WITH_OPENLDAP_VER:tl} != "auto" WANT_OPENLDAP_VER= ${WITH_OPENLDAP_VER} .endif .if ${PORT_OPTIONS:MOPENLDAP} LDAP_LIB_TYPE= OPENLDAP2 SEDLIST+= -e 's,XX_LDAP_LIBS_XX,-L${LOCALBASE:S/,/\\,/g}/lib -llber -lldap,' \ -e 's,XX_LDAP_INCLUDE_XX,-I${LOCALBASE:S/,/\\,/g}/include,' \ -e 's,XX_LDAP_TYPE_XX,${LDAP_LIB_TYPE:S/,/\\,/g},' \ -e 's,^\# (LOOKUP_LDAP=),\1,' .else SEDLIST+= -e 's,XX_LDAP_[^ ]*_XX,,' \ -e 's,^(LDAP_LIB_TYPE=),\# \1,' .endif .if ${PORT_OPTIONS:MBDB} INVALID_BDB_VER= 2 3 DB_LIBS= -L${BDB_LIB_DIR} -l${BDB_LIB_NAME} DB_INCLUDES= -I${BDB_INCLUDE_DIR} .else DB_LIBS= DB_INCLUDES= SEDLIST+= -e 's,^(DBMLIB=),\# \1,' .endif SEDLIST+= -e 's,XX_DB_LIBS_XX,${DB_LIBS:S/,/\\,/g},' \ -e 's,XX_DB_INCLUDES_XX,${DB_INCLUDES:S/,/\\,/g},' .if ${PORT_OPTIONS:MLMDB} _LMDB_LIBS= -L${LOCALBASE}/lib -llmdb _LMDB_INCLUDES= -I${LOCALBASE}/include SEDLIST+= -e 's,^\# (EXPERIMENTAL_LMDB=),\1,' .else _LMDB_LIBS= _LMDB_INCLUDES= .endif SEDLIST+= -e 's,XX_LMDB_LIBS_XX,${_LMDB_LIBS:S/,/\\,/g},' \ -e 's,XX_LMDB_INCLUDES_XX,${_LMDB_INCLUDES:S/,/\\,/g},' .if ${PORT_OPTIONS:MMYSQL} SEDLIST+= -e 's,XX_MYSQL_LIBS_XX,-L${LOCALBASE:S/,/\\,/g}/lib/mysql -l${_MYSQL_SHLIB:S/lib//},' \ -e 's,XX_MYSQL_INCLUDE_XX,-I${LOCALBASE:S/,/\\,/g}/include/mysql,' \ -e 's,^\# (LOOKUP_MYSQL=),\1,' .else SEDLIST+= -e 's,XX_MYSQL_[^ ]*_XX,,' .endif .if ${PORT_OPTIONS:MSASLAUTHD} SASLAUTHD_SOCKET?= /var/run/saslauthd/mux SEDLIST+= -e 's,^\# (CYRUS_SASLAUTHD_SOCKET=).*,\1${SASLAUTHD_SOCKET:S/,/\\,/g},' .endif .if ${PORT_OPTIONS:MPAM} SEDLIST+= -e 's,XX_PAM_LIBS_XX,-lpam,' \ -e 's,^\# (SUPPORT_PAM=),\1,' .else SEDLIST+= -e 's,XX_PAM_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MAUTH_CRAM_MD5} SEDLIST+= -e 's,^\# (AUTH_CRAM_MD5=),\1,' .endif .if ${PORT_OPTIONS:MAUTH_PLAINTEXT} SEDLIST+= -e 's,^\# (AUTH_PLAINTEXT=),\1,' .endif .if ${PORT_OPTIONS:MAUTH_DOVECOT} SEDLIST+= -e 's,^\# (AUTH_DOVECOT=),\1,' .endif .if ${PORT_OPTIONS:MAUTH_SPA} SEDLIST+= -e 's,^\# (AUTH_SPA=),\1,' .endif .if ${PORT_OPTIONS:MAUTH_SASL} SEDLIST+= -e 's,^\# (AUTH_CYRUS_SASL=),\1,' \ -e 's,^\# (AUTH_LIBS=.*-lsasl2),\1,' .endif .if ${PORT_OPTIONS:MAUTH_RADIUS} WITH_RADIUS_TYPE?= RADLIB .if ${WITH_RADIUS_TYPE:tl} == radlib SEDLIST+= -e 's,XX_RADIUS_LIBS_XX,-lradius,' \ -e 's,^\# (RADIUS_CONFIG_FILE=).*,\1/etc/radius.conf,' \ -e 's,^\# (RADIUS_LIB_TYPE=).*,\1RADLIB,' .elif ${WITH_RADIUS_TYPE:tl} == radiusclient LIB_DEPENDS+= libradiusclient-ng.so:net/radiusclient SEDLIST+= -e 's,XX_RADIUS_LIBS_XX,-L${LOCALBASE:S/,/\\,/g}/lib -lradiusclient-ng,' \ -e 's,^\# (RADIUS_CONFIG_FILE=).*,\1${LOCALBASE:S/,/\\,/g}/etc/radiusclient-ng/radiusclient.conf,' \ -e 's,^\# (RADIUS_LIB_TYPE=).*,\1RADIUSCLIENTNEW,' .else IGNORE= the variable WITH_RADIUS_TYPE must be either RADLIB or RADIUSCLIENT .endif .else SEDLIST+= -e 's,XX_RADIUS_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MPGSQL} SEDLIST+= -e 's,XX_PGSQL_LIBS_XX,-L${LOCALBASE:S/,/\\,/g}/lib -lpq,' \ -e 's,XX_PGSQL_INCLUDE_XX,-I${LOCALBASE:S/,/\\,/g}/include/pgsql,' \ -e 's,^\# (LOOKUP_PGSQL=),\1,' .else SEDLIST+= -e 's,XX_PGSQL_[^ ]*_XX,,' .endif .if ! ${PORT_OPTIONS:MPGSQL} && ! ${PORT_OPTIONS:MMYSQL} && !defined(LDAP_LIB_TYPE) && \ ! ${PORT_OPTIONS:MBDB} SEDLIST+= -e 's,^(LOOKUP_LIBS=),\# \1,' \ -e 's,^(LOOKUP_INCLUDE=),\# \1,' .endif .if ! ${PORT_OPTIONS:MDNSDB} SEDLIST+= -e 's,^(LOOKUP_DNSDB=),\# \1,' .endif .if ${PORT_OPTIONS:MMAILDIR} SEDLIST+= -e 's,^\# (SUPPORT_MAILDIR=),\1,' .endif .if ${PORT_OPTIONS:MMAILSTORE} SEDLIST+= -e 's,^\# (SUPPORT_MAILSTORE=),\1,' .endif .if ${PORT_OPTIONS:MMBX} SEDLIST+= -e 's,^\# (SUPPORT_MBX=),\1,' .endif .if ${PORT_OPTIONS:MCDB} SEDLIST+= -e 's,^\# (LOOKUP_CDB=),\1,' .endif .if ${PORT_OPTIONS:MDSEARCH} SEDLIST+= -e 's,^\# (LOOKUP_DSEARCH=),\1,' .endif .if ! ${PORT_OPTIONS:MLSEARCH} SEDLIST+= -e 's,^(LOOKUP_LSEARCH=),\# \1,' .endif .if ${PORT_OPTIONS:MNIS} SEDLIST+= -e 's,^\# (LOOKUP_NIS=),\1,' .endif .if ${PORT_OPTIONS:MPASSWD} SEDLIST+= -e 's,^\# (LOOKUP_PASSWD=),\1,' .endif .if ${PORT_OPTIONS:MSQLITE} SEDLIST+= -e 's,XX_SQLITE_LIBS_XX,`pkg-config --static --libs sqlite3`,' \ -e 's,XX_SQLITE_FLAGS_XX,`pkg-config --cflags sqlite3`,' \ -e 's,^\# (LOOKUP_SQLITE=),\1,' .else SEDLIST+= -e 's,XX_SQLITE_LIBS_XX,,' \ -e 's,XX_SQLITE_FLAGS_XX,,' .endif .if ${PORT_OPTIONS:MREDIS} SEDLIST+= -e 's,XX_REDIS_LIBS_XX,-L${LOCALBASE}/lib -lhiredis,' \ -e 's,^\# (LOOKUP_REDIS=),\1,' \ -e 's,^\# (REDIS=),\1,' .else SEDLIST+= -e 's,XX_REDIS_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MLMTP} SEDLIST+= -e 's,^\# (TRANSPORT_LMTP=),\1,' .endif .if ! ${PORT_OPTIONS:MALT_CONFIG_PREFIX} SEDLIST+= -e 's,^(ALT_CONFIG_PREFIX=),\# \1,' .endif .if ${PORT_OPTIONS:MSPF} SEDLIST+= -e 's,XX_SPF_FLAGS_XX,-DSPF,' \ -e 's,XX_SPF_LIBS_XX,-L${LOCALBASE}/lib -lspf2 -lpthread,' \ -e 's,^\# (SUPPORT_SPF=),\1,' .else SEDLIST+= -e 's,XX_SPF_FLAGS_XX,,' \ -e 's,XX_SPF_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MSRS} LIB_DEPENDS+= libsrs_alt.so:mail/libsrs_alt SEDLIST+= -e 's,XX_SRS_FLAGS_XX,-DEXPERIMENTAL_SRS,' \ -e 's,XX_SRS_LIBS_XX,-L${LOCALBASE}/lib -lsrs_alt,' .else SEDLIST+= -e 's,XX_SRS_FLAGS_XX,,' \ -e 's,XX_SRS_LIBS_XX,,' .endif .if ${PORT_OPTIONS:MREADLINE} SEDLIST+= -e 's,^\# (USE_READLINE=),\1,' .endif .if ${PORT_OPTIONS:MCONTENT_SCAN} SEDLIST+= -e 's,^\# (WITH_CONTENT_SCAN=),\1,' .endif .if !defined(EXIMON_ONLY) && ${PORT_OPTIONS:MDAEMON} USE_RC_SUBR= exim PLIST_SUB+= EXIMDAEMON="" SUB_LIST+= LOGDIR="${LOGDIR}" .else PLIST_SUB+= EXIMDAEMON="@comment " .endif .if ${PORT_OPTIONS:MIPV6} SEDLIST+= -e 's,^\# (HAVE_IPV6=),\1,' .endif .if ${PORT_OPTIONS:MDISABLE_D_OPT} SEDLIST+= -e 's,^\# (DISABLE_D_OPTION=),\1,' .else .if defined(WHITELIST_D_MACROS) SEDLIST+= -e 's,^\# (WHITELIST_D_MACROS=).*$$,\1${WHITELIST_D_MACROS:S/,/\\,/g},' .endif .endif .if defined(TRUSTED_CONFIG_LIST) SEDLIST+= -e 's,^\# (TRUSTED_CONFIG_LIST=).*$$,\1${TRUSTED_CONFIG_LIST:S/,/\\,/g},' .endif .if ${PORT_OPTIONS:MQUEUEFILE} SEDLIST+= -e 's,^\# (EXPERIMENTAL_QUEUEFILE=),\1,' .endif MAKE_ENV+= INSTALL_ARG="${EXIM_INSTALL_ARG}" DUMMY_LDFLAGS!= ${ECHO_CMD} ${LDFLAGS} | ${SED} -e 's|-Wl,-rpath|-Wl,-DUMMYrpath|g; s|-rpath|-Wl,-rpath|g; s|-DUMMYrpath|-rpath|g' pre-everything:: @${ECHO} 'Exim now drops privileges when alternate configuration' @${ECHO} 'files are used. You can set make variable TRUSTED_CONFIG_LIST' @${ECHO} 'to specify the list of configuration files for which' @${ECHO} 'root privileges will be retained.' @${ECHO} '' @${ECHO} 'You can whitelist some macros using the make variable' @${ECHO} 'WHITELIST_D_MACROS. This is useful if you are running' @${ECHO} 'with DISABLE_D_OPT set, but macros whitelisting will be' @${ECHO} 'removed in some future Exim release, so it is better' @${ECHO} 'to use TRUSTED_CONFIG_LIST to set the list of trusted' @${ECHO} 'configuration files.' .if empty(.MAKEFLAGS:M-s) && ${PORT_OPTIONS:MWISHLIST} @${ECHO} '' @${ECHO} 'Included extra patches:' @${FIND} ${PATCHDIR} -name 'wishlist-*.patch' \ -exec ${SED} -ne 's,^# , ,p' {} \; @${ECHO} '' .endif post-extract: .if ${PORT_OPTIONS:MSA_EXIM} @cd ${WRKDIR} && ${TAR} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/sa-exim-${SA_EXIM_VERSION}.tar.gz ${EXTRACT_AFTER_ARGS} .endif do-configure: @${MKDIR} ${WRKSRC}/Local @${SED} -E ${SEDLIST} ${WRKSRC}/src/EDITME > ${WRKSRC}/Local/Makefile .if ${PORT_OPTIONS:MEXIMON} @${CP} ${WRKSRC}/exim_monitor/EDITME ${WRKSRC}/Local/eximon.conf .endif @${REINPLACE_CMD} -E ${SEDLIST} ${WRKSRC}/src/configure.default @${REINPLACE_CMD} -e 's!$$(LDFLAGS)!$$(DUMMY_LDFLAGS) -L$${LOCALBASE}/lib!' ${WRKSRC}/OS/Makefile-Base @${REINPLACE_CMD} -e 's/"(Exim $$version_number)\\n\\t"/"(Exim $$version_number (${OPSYS}))\\n\\t"/' \ ${WRKSRC}/src/globals.c @${REINPLACE_CMD} -e 's/Exim version %s \(#%s \)\{0,1\}/&(${OPSYS} ${OSREL}) /' ${WRKSRC}/src/exim.c @${REINPLACE_CMD} -e 's/^#include "cnumber\.h"$$/${PORTREVISION}/' ${WRKSRC}/src/version.c @${REINPLACE_CMD} -E -e 's/^(PERL_COMMAND=).*/\1${PERL:S,/,\/,g}/' \ -e 's/^(CC=).*/\1${CC:S,/,\/,g}/' ${WRKSRC}/OS/Makefile-Default .if ${PORT_OPTIONS:MSA_EXIM} @${REINPLACE_CMD} -E -e 's/^\# (HAVE_LOCAL_SCAN=).*/\1yes/' \ ${WRKSRC}/OS/Makefile-Default @${REINPLACE_CMD} -E -e 's/^(LOCAL_SCAN_SOURCE=).*/\1Local\/sa-exim.c/' \ ${WRKSRC}/OS/Makefile-Default @${CP} ${WRKDIR}/sa-exim-${SA_EXIM_VERSION}/sa-exim.c ${WRKSRC}/Local @{ \ ${ECHO_CMD} "char *version=\"${SA_EXIM_VERSION}\";"; \ ${ECHO_CMD} "#define SPAMC_LOCATION \"${LOCALBASE}/bin/spamc\""; \ ${ECHO_CMD} "#define SPAMASSASSIN_CONF \"${PREFIX}/etc/exim/sa-exim.conf\""; \ } > ${WRKSRC}/Local/sa-exim.h @${REINPLACE_CMD} -e 's,/usr/bin/spamc,${LOCALBASE}/bin/spamc,' \ ${WRKDIR}/sa-exim-${SA_EXIM_VERSION}/sa-exim.conf .endif @${REINPLACE_CMD} -E -e 's/XX_STRIPCMD_XX/${STRIP_CMD:S,/,\/,g}/' \ ${WRKSRC}/OS/Makefile-FreeBSD @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} configure) post-build: .for script in ${DAILY_SCRIPTS} @${SED} ${SED_SCRIPT} ${FILESDIR}/${script}.sh > ${WRKDIR}/${script}.sh .endfor @${SED} ${SED_SCRIPT} ${FILESDIR}/POST-INSTALL-NOTES > \ ${WRKDIR}/POST-INSTALL-NOTES @${SED} ${SED_SCRIPT} ${FILESDIR}/POST-INSTALL-NOTES.clamd > ${WRKDIR}/POST-INSTALL-NOTES.clamd @${SED} ${SED_SCRIPT} ${FILESDIR}/POST-INSTALL-NOTES > ${WRKDIR}/POST-INSTALL-NOTES @[ ! -f ${PKGDIR}/pkg-message ] || ${SED} ${SED_SCRIPT} ${PKGDIR}/pkg-message > ${WRKDIR}/pkg-message .if !defined(EXIMON_ONLY) post-install: .if ${PORT_OPTIONS:MDAEMON} ${MKDIR} ${STAGEDIR}${PREFIX}/etc/periodic/daily .for script in ${DAILY_SCRIPTS} ${INSTALL_SCRIPT} ${WRKDIR}/${script}.sh ${STAGEDIR}${PREFIX}/etc/periodic/daily/${script} .endfor .endif @${MKDIR} -m 750 ${STAGEDIR}${LOGDIR} ${INSTALL_MAN} ${WRKSRC}/doc/exim.8 ${STAGEDIR}${MAN8PREFIX}/man/man8 .if ${PORT_OPTIONS:MDOCS} @${MKDIR} ${STAGEDIR}${DOCSDIR} ${INSTALL_DATA} ${WRKDIR}/POST-INSTALL-NOTES ${STAGEDIR}${DOCSDIR} ${INSTALL_DATA} ${WRKDIR}/POST-INSTALL-NOTES.clamd ${STAGEDIR}${DOCSDIR} .for docfile in ${PORTDOC_BASE} ${INSTALL_DATA} ${WRKSRC}/${docfile} ${STAGEDIR}${DOCSDIR} .endfor .for docfile in ${PORTDOC_FILES} ${INSTALL_DATA} ${WRKSRC}/doc/${docfile} ${STAGEDIR}${DOCSDIR} .endfor @${MKDIR} ${STAGEDIR}${EXAMPLESDIR} .for example in ${PORT_EXAMPLES} ${INSTALL_SCRIPT} ${WRKSRC}/build-${OPSYS}-${ARCH}/${example} ${STAGEDIR}${EXAMPLESDIR} .endfor .endif .if ${PORT_OPTIONS:MSA_EXIM} ${INSTALL_DATA} ${WRKDIR}/sa-exim-${SA_EXIM_VERSION}/sa-exim.conf \ ${STAGEDIR}${PREFIX}/etc/exim/sa-exim.conf.sample .endif .endif # ! defined(EXIMON_ONLY) .include # If using clang, avoid too many warnings due to Exim code style .if ${CHOSEN_COMPILER_TYPE} == "clang" EXIM_WARN_FLAGS?= -Wno-logical-op-parentheses -Wno-macro-redefined -Wno-parentheses -Wno-dangling-else .endif CFLAGS+= ${EXIM_WARN_FLAGS} .include Index: branches/2019Q3/mail/exim/distinfo =================================================================== --- branches/2019Q3/mail/exim/distinfo (revision 507319) +++ branches/2019Q3/mail/exim/distinfo (revision 507320) @@ -1,5 +1,5 @@ -TIMESTAMP = 1549968111 -SHA256 (exim/exim-4.92.tar.bz2) = 541fcfb3d57d51647b552a0357cde26da34c843a33647373348a27002cbefa88 -SIZE (exim/exim-4.92.tar.bz2) = 1924751 +TIMESTAMP = 1564053474 +SHA256 (exim/exim-4.92.1.tar.bz2) = b755658ab08cdabca7aaeab25f64cfe4f8d1a0e1998d9750e4bd8cff5faf5f8c +SIZE (exim/exim-4.92.1.tar.bz2) = 1927542 SHA256 (exim/sa-exim-4.2.tar.gz) = 72e0a735547f18b05785e6c58a71d24623858f0f5234a5dc0e24cb453999e99a SIZE (exim/sa-exim-4.2.tar.gz) = 66575 Index: branches/2019Q3 =================================================================== --- branches/2019Q3 (revision 507319) +++ branches/2019Q3 (revision 507320) Property changes on: branches/2019Q3 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r507316