Index: head/Mk/Uses/perl5.mk
===================================================================
--- head/Mk/Uses/perl5.mk	(revision 471347)
+++ head/Mk/Uses/perl5.mk	(revision 471348)
@@ -1,323 +1,319 @@
 # $FreeBSD$
 #
 # Provide support to use perl5
 #
 # PERL5		- Set to full path of perl5, either in the system or
 #		  installed from a port.
 # PERL		- Set to full path of perl5, either in the system or
 #		  installed from a port, but without the version number.
 #		  Use this if you need to replace "#!" lines in scripts.
 # PERL_VERSION	- Full version of perl5 (see below for current value).
 #
 # PERL_VER	- Short version of perl5 (major.minor without patchlevel)
 #
 # PERL_LEVEL	- Perl version as an integer of the form MNNNPP, where
 #		  M is major version, N is minor version, and P is
 #		  the patch level. E.g., PERL_VERSION=5.14.4 would give
 #		  a PERL_LEVEL of 501404. This can be used in comparisons
 #		  to determine if the version of perl is high enough,
 #		  whether a particular dependency is needed, etc.
 # PERL_ARCH	- Directory name of architecture dependent libraries
 #		  (value: mach).
 # PERL_PORT	- Name of the perl port that is installed
 #		  (for example: perl5.24)
 # SITE_PERL	- Directory name where site specific perl packages go.
 #		  This value is added to PLIST_SUB.
 # SITE_ARCH	- Directory name where arch site specific perl packages go.
 #		  This value is added to PLIST_SUB.
 # USE_PERL5	- If set, this port uses perl5 in one or more of the extract,
 #		  patch, build, run or test phases.
 #		  It can also have configure, modbuild and modbuildtiny when
 #		  the port needs to run Makefile.PL, Build.PL and a
 #		  Module::Build::Tiny flavor of Build.PL.
 #
 # MAINTAINER: perl@FreeBSD.org
 
 .if !defined(_INCLUDE_USES_PERL5_MK)
 _INCLUDE_USES_PERL5_MK=	yes
 
 .  if !empty(perl5_ARGS)
 IGNORE=	Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
 .  endif
 
 USE_PERL5?=	run build
 
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
-.    if ${PERL5_DEFAULT} == 5.22
-.include "${PORTSDIR}/lang/perl5.22/version.mk"
-.    elif ${PERL5_DEFAULT} == 5.24
+.    if ${PERL5_DEFAULT} == 5.24
 .include "${PORTSDIR}/lang/perl5.24/version.mk"
 .    elif ${PERL5_DEFAULT} == 5.26
 .include "${PORTSDIR}/lang/perl5.26/version.mk"
 .    elif ${PERL5_DEFAULT} == 5.28
 .include "${PORTSDIR}/lang/perl5.28/version.mk"
 .    elif ${PERL5_DEFAULT} == devel
 .include "${PORTSDIR}/lang/perl5-devel/version.mk"
 # Force PERL_PORT here in case two identical PERL_VERSION.
 PERL_PORT?=	perl5-devel
 .    else
 IGNORE=	Invalid perl5 version ${PERL5_DEFAULT}
 .    endif
 
 PERL_VER?=	${PERL_VERSION:C/\.[0-9]+$//}
 
 .  if !defined(PERL_LEVEL) && defined(PERL_VERSION)
 perl_major=	${PERL_VERSION:C|^([1-9]+).*|\1|}
 _perl_minor=	00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
 perl_minor=	${_perl_minor:C|^.*(...)|\1|}
 .    if ${perl_minor} >= 100
 perl_minor=	${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
 perl_patch=	${PERL_VERSION:C|^.*(..)|\1|}
 .    else # ${perl_minor} < 100
 _perl_patch=	0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
 perl_patch=	${_perl_patch:C|^.*(..)|\1|}
 .    endif # ${perl_minor} < 100
 PERL_LEVEL=	${perl_major}${perl_minor}${perl_patch}
 .  else
 PERL_LEVEL=0
 .  endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
 
 PERL_ARCH?=	mach
 
 # there must always be a default to prevent dependency failures such
 # as "ports/lang: not found".  Also, perl5-devel is taken care in the
 # perl5_default file, or up there in the default versions selection.
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
 .  if   ${PERL_LEVEL} >= 502800
 PERL_PORT?=	perl5.28
 .  elif   ${PERL_LEVEL} >= 502600
 PERL_PORT?=	perl5.26
-.  elif   ${PERL_LEVEL} >= 502400
+.  else # ${PERL_LEVEL} < 502600
 PERL_PORT?=	perl5.24
-.  else # ${PERL_LEVEL} < 502400
-PERL_PORT?=	perl5.22
 .  endif
 
 SITE_PERL_REL?=	lib/perl5/site_perl
 SITE_PERL?=	${LOCALBASE}/${SITE_PERL_REL}
 SITE_ARCH_REL?=	${SITE_PERL_REL}/${PERL_ARCH}/${PERL_VER}
 SITE_ARCH?=	${LOCALBASE}/${SITE_ARCH_REL}
 SITE_MAN3_REL?=	${SITE_PERL_REL}/man/man3
 SITE_MAN3?=	${PREFIX}/${SITE_MAN3_REL}
 SITE_MAN1_REL?=	${SITE_PERL_REL}/man/man1
 SITE_MAN1?=	${PREFIX}/${SITE_MAN1_REL}
 
 PERL5?=		${LOCALBASE}/bin/perl${PERL_VERSION}
 PERL?=		${LOCALBASE}/bin/perl
 CONFIGURE_ENV+=	ac_cv_path_PERL=${PERL} ac_cv_path_PERL_PATH=${PERL} \
 		PERL_USE_UNSAFE_INC=1
 
 MAKE_ENV+=	PERL_USE_UNSAFE_INC=1
 
 QA_ENV+=	SITE_ARCH_REL=${SITE_ARCH_REL} LIBPERL=libperl.so.${PERL_VER}
 
 # Define the want perl first if defined
 .  if ${USE_PERL5:M5*}
 want_perl_sign=		${USE_PERL5:M5*:C|^[0-9.]+||}
 want_perl_ver=		${USE_PERL5:M5*:S|${want_perl_sign}$||}
 want_perl_major=	${want_perl_ver:C|\..*||}
 _want_perl_minor=	${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
 _want_perl_patch=	${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
 want_perl_minor=	${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
 want_perl_patch=	${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
 USE_PERL5_LEVEL=	${want_perl_major}${want_perl_minor}${want_perl_patch}
 .  endif
 
 # All but version
 _USE_PERL5=	${USE_PERL5:N5*}
 
 # Mask unspecified components. E.g. this way "5" will match any "5.x.x".
 .  if empty(_want_perl_minor)
 masked_PERL_LEVEL=	${PERL_LEVEL:C|(.....)$|00000|}
 .  elif empty(_want_perl_patch)
 masked_PERL_LEVEL=	${PERL_LEVEL:C|(..)$|00|}
 .  else
 masked_PERL_LEVEL=	${PERL_LEVEL}
 .  endif
 
 .  if defined(want_perl_sign)
 .    if ${want_perl_sign} == "+"
 .      if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
 USE_PERL5_REASON?=	requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
 IGNORE=	${USE_PERL5_REASON}
 .      endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
 .    elif ${want_perl_sign} == ""
 .      if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
 USE_PERL5_REASON?=	requires Perl ${want_perl_ver} exactly
 IGNORE=	${USE_PERL5_REASON}
 .      endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
 .    elif ${want_perl_sign} == "-"
 .      if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
 USE_PERL5_REASON?=	requires a Perl version earlier than ${want_perl_ver}
 IGNORE=	${USE_PERL5_REASON}
 .      endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
 .    else # wrong suffix
 IGNORE=	improper use of USE_PERL5
 .    endif
 .  endif
 
 _USES_POST+=	perl5
 .endif
 
 .if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
 _INCLUDE_USES_PERL5_POST_MK=	yes
 
 PLIST_SUB+=	PERL_VERSION=${PERL_VERSION} \
 		PERL_VER=${PERL_VER} \
 		PERL5_MAN1=${SITE_MAN1_REL} \
 		PERL5_MAN3=${SITE_MAN3_REL} \
 		SITE_PERL=${SITE_PERL_REL} \
 		SITE_ARCH=${SITE_ARCH_REL}
 
 # handle perl5 specific manpages
 .  for sect in 3
 .    if defined(P5MAN${sect})
 _MANPAGES+=	${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
 .    endif
 .  endfor
 MANDIRS+=	${PREFIX}/${SITE_PERL_REL}/man
 
 .  if ${_USE_PERL5:Mmodbuild} || ${_USE_PERL5:Mmodbuildtiny}
 _USE_PERL5+=	configure
 ALL_TARGET?=	# empty
 CONFIGURE_ARGS+=--install_path lib="${PREFIX}/${SITE_PERL_REL}" \
 		--install_path arch="${PREFIX}/${SITE_ARCH_REL}" \
 		--install_path script="${PREFIX}/bin" \
 		--install_path bin="${PREFIX}/bin" \
 		--install_path libdoc="${MAN3PREFIX}/man/man3" \
 		--install_path bindoc="${MAN1PREFIX}/man/man1"
 CONFIGURE_SCRIPT?=	Build.PL
 PL_BUILD?=	Build
 CONFIGURE_ARGS+=--destdir ${STAGEDIR}
 DESTDIRNAME=	--destdir
 .    if ${_USE_PERL5:Mmodbuild}
 CONFIGURE_ARGS+=--perl="${PERL}"
 .      if ${PORTNAME} != Module-Build
 BUILD_DEPENDS+=	p5-Module-Build>=0.4206:devel/p5-Module-Build
 .      endif
 CONFIGURE_ARGS+=--create_packlist 1
 .    endif
 .    if ${_USE_PERL5:Mmodbuildtiny}
 .      if ${PORTNAME} != Module-Build-Tiny
 BUILD_DEPENDS+=	p5-Module-Build-Tiny>=0.039:devel/p5-Module-Build-Tiny
 .      endif
 CONFIGURE_ARGS+=--create_packlist 1
 .    endif
 .  elif ${_USE_PERL5:Mconfigure}
 CONFIGURE_ARGS+=INSTALLDIRS="site"
 .  endif # modbuild
 
 .  if ${_USE_PERL5:Mconfigure}
 _USE_PERL5+=	build run
 # Disable AutoInstall from attempting to install from CPAN directly in
 # the case of missing dependencies.  This causes the build to loop on
 # the build cluster asking for interactive input.
 CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
 .    if defined(BATCH) && !defined(IS_INTERACTIVE)
 CONFIGURE_ENV+=	PERL_MM_USE_DEFAULT="YES"
 .    endif # defined(BATCH) && !defined(IS_INTERACTIVE)
 .  endif # configure
 
 .  if ${_USE_PERL5:Mextract}
 EXTRACT_DEPENDS+=	${PERL5_DEPEND}:lang/${PERL_PORT}
 .  endif
 
 .  if ${_USE_PERL5:Mpatch}
 PATCH_DEPENDS+=		${PERL5_DEPEND}:lang/${PERL_PORT}
 .  endif
 
 .  if ${_USE_PERL5:Mbuild}
 BUILD_DEPENDS+=		${PERL5_DEPEND}:lang/${PERL_PORT}
 .  endif
 
 .  if ${_USE_PERL5:Mrun}
 RUN_DEPENDS+=		${PERL5_DEPEND}:lang/${PERL_PORT}
 .  endif
 
 .  if ${_USE_PERL5:Mtest}
 TEST_DEPENDS+=		${PERL5_DEPEND}:lang/${PERL_PORT}
 .  endif
 
 .  if ${_USE_PERL5:Mconfigure}
 CONFIGURE_ARGS+=	CC="${CC}" CCFLAGS="${CFLAGS}" LD="${CC}" PREFIX="${PREFIX}" \
 			INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
 CONFIGURE_SCRIPT?=	Makefile.PL
 MAN3PREFIX?=		${PREFIX}/${SITE_PERL_REL}
 MAN1PREFIX?=		${PREFIX}/${SITE_PERL_REL}
 .undef HAS_CONFIGURE
 
 .    if !target(do-configure)
 do-configure:
 	@if [ -f ${SCRIPTDIR}/configure ]; then \
 		cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
 		${SCRIPTDIR}/configure; \
 	fi
 	@cd ${CONFIGURE_WRKSRC} && \
 		${SETENV} ${CONFIGURE_ENV} \
 		${PERL5} ${CONFIGURE_CMD} ${CONFIGURE_ARGS}
 .      if !${_USE_PERL5:Mmodbuild*}
 	@cd ${CONFIGURE_WRKSRC} && \
 		${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
 .      endif # ! modbuild
 .    endif # !target(do-configure)
 .  endif # configure
 
 .  if ${_USE_PERL5:Mmodbuild*}
 .    if !target(do-build)
 do-build:
 	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${ALL_TARGET} ${MAKE_ARGS})
 .    endif # !target(do-build)
 
 .    if !${USES:Mgmake}
 .      if !target(do-install)
 do-install:
 	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${INSTALL_TARGET} ${MAKE_ARGS})
 .      endif # !target(do-install)
 .    endif # ! USES=gmake
 .  endif # modbuild
 
 PACKLIST_DIR?=	${PREFIX}/${SITE_ARCH_REL}/auto
 
 # In all those, don't use - before the command so that the user does
 # not wonder what has been ignored by this message "*** Error code 1 (ignored)"
 _USES_install+=	560:fix-perl-things
 fix-perl-things:
 # Remove STAGEDIR from .packlist and add the file to the plist.
 	@(if [ -d ${STAGEDIR}${PACKLIST_DIR} ] ; then \
 		${FIND} ${STAGEDIR}${PACKLIST_DIR} -name .packlist | while read f ; do \
 			${SED} -i '' 's|^${STAGEDIR}||' "$$f"; \
 			${ECHO} $$f | ${SED} -e 's|^${STAGEDIR}||' >> ${TMPPLIST}; \
 		done \
 	fi) || :
 
 # Starting with perl 5.20, the empty bootstrap files are not installed any more
 # by ExtUtils::MakeMaker.  As we don't need them anyway, remove them.
 # Module::Build continues to install them, so remove the files unconditionally.
 	@${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete || :
 
 # Some ports use their own way of building perl modules and generate
 # perllocal.pod, remove it here so that those ports don't include it
 # by mistake in their plists.  It is sometime compressed, so use a
 # shell glob for the removal.  Also, remove the directories that
 # contain it to not leave orphans directories around.
 	@${RM} ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH}/perllocal.pod* || :
 	@${RMDIR} -p ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} 2>/dev/null || :
 # Starting at ExtUtils::MakeMaker 7.06 and Perl 5.25.1, the base README.pod is
 # no longer manified into a README.3, as the README.pod is installed and can be
 # read with perldoc, remove the README.3 files that may be generated.
 	@[ -d "${STAGEDIR}${SITE_MAN3}" ] && \
 		${FIND} ${STAGEDIR}${SITE_MAN3} -name '*::README.3' -delete || :
 
 .  if !target(do-test) && (!empty(USE_PERL5:Mmodbuild*) || !empty(USE_PERL5:Mconfigure))
 TEST_TARGET?=	test
 TEST_WRKSRC?=	${BUILD_WRKSRC}
 do-test:
 .    if ${USE_PERL5:Mmodbuild*}
 	@cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
 .    elif ${USE_PERL5:Mconfigure}
 	@cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
 .    endif # USE_PERL5:Mmodbuild*
 .  endif # do-test
 .endif # defined(_POSTMKINCLUDED)
Index: head/Mk/bsd.default-versions.mk
===================================================================
--- head/Mk/bsd.default-versions.mk	(revision 471347)
+++ head/Mk/bsd.default-versions.mk	(revision 471348)
@@ -1,133 +1,133 @@
 # $FreeBSD$
 #
 # MAINTAINER:	ports@FreeBSD.org
 #
 # Provide default versions for ports with multiple versions selectable
 # by the user.
 #
 # Users who want to override these defaults can easily do so by defining
 # DEFAULT_VERSIONS in their make.conf as follows:
 #
 #   DEFAULT_VERSIONS=	perl5=5.20 ruby=2.0
 
 .if !defined(_INCLUDE_BSD_DEFAULT_VERSIONS_MK)
 _INCLUDE_BSD_DEFAULT_VERSIONS_MK=	yes
 
 LOCALBASE?=	/usr/local
 
 .for lang in APACHE BDB COROSYNC EMACS FIREBIRD FORTRAN FPC GCC GHOSTSCRIPT \
 	LINUX LUA MYSQL PERL5 PGSQL PHP PYTHON PYTHON2 PYTHON3 RUBY SSL TCLTK
 .if defined(${lang}_DEFAULT)
 ERROR+=	"The variable ${lang}_DEFAULT is set and it should only be defined through DEFAULT_VERSIONS+=${lang:tl}=${${lang}_DEFAULT} in /etc/make.conf"
 .endif
 #.undef ${lang}_DEFAULT
 .endfor
 
 .for lang in ${DEFAULT_VERSIONS}
 _l=		${lang:C/=.*//g}
 ${_l:tu}_DEFAULT=	${lang:C/.*=//g}
 .endfor
 
 # Possible values: 2.2, 2.4
 APACHE_DEFAULT?=	2.4
 # Possible values: 48, 5, 6
 BDB_DEFAULT?=		5
 # Possible values: 2, 3
 COROSYNC_DEFAULT?=	2
 # Possible_values: full canna nox devel_full devel_nox
 #EMACS_DEFAULT?=	let the flavor be the default if not explicitly set
 # Possible values: 2.5
 FIREBIRD_DEFAULT?=	2.5
 # Possible values: flang (experimental), gfortran
 FORTRAN_DEFAULT?=	gfortran
 # Possible values: 3.0.4
 FPC_DEFAULT?=		3.0.4
 # Possible values: 4.9, 5, 6, 7
 GCC_DEFAULT?=		6
 # Possible values: 7, 8, 9, agpl
 GHOSTSCRIPT_DEFAULT?=	agpl
 # Possible values: 1.8.2
 LAZARUS_DEFAULT?=	1.8.2
 .if ${ARCH} == amd64
 # Possible values: c6, c6_64, c7
 LINUX_DEFAULT?=		c6_64
 .else
 # Possible values: c6
 LINUX_DEFAULT?=		c6
 .endif
 # Possible values: 5.1, 5.2, 5.3
 LUA_DEFAULT?=		5.2
 # Possible values: 5.5, 5.6, 5.7, 8.0, 5.5m, 10.0m, 10.1m, 10.2m, 5.5p, 5.6p, 5.7p, 5.6w
 MYSQL_DEFAULT?=		5.6
-# Possible values: 5.22, 5.24, 5.26, 5.28, devel
+# Possible values: 5.24, 5.26, 5.28, devel
 .if !exists(${LOCALBASE}/bin/perl) || (!defined(_PORTS_ENV_CHECK) && \
     defined(PACKAGE_BUILDING))
 PERL5_DEFAULT?=		5.26
 .elif !defined(PERL5_DEFAULT)
 # There's no need to replace development versions, like "5.23" with "devel"
 # because 1) nobody is supposed to use it outside of poudriere, and 2) it must
 # be set manually in /etc/make.conf in the first place, and we're never getting
 # in here.
 .if !defined(_PERL5_FROM_BIN)
 _PERL5_FROM_BIN!=	perl -e 'printf "%vd\n", $$^V;'
 .endif
 _EXPORTED_VARS+=	_PERL5_FROM_BIN
 PERL5_DEFAULT:=		${_PERL5_FROM_BIN:R}
 .endif
 # Possible values: 9.3, 9.4, 9.5, 9.6, 10
 PGSQL_DEFAULT?=		9.5
 # Possible values: 5.6, 7.0, 7.1, 7.2
 PHP_DEFAULT?=		5.6
 # Possible values: 2.7, 3.4, 3.5, 3.6
 PYTHON_DEFAULT?=	2.7
 # Possible values: 2.7
 PYTHON2_DEFAULT?=	2.7
 # Possible values: 3.4, 3.5, 3.6
 PYTHON3_DEFAULT?=	3.6
 # Possible values: 2.3, 2.4, 2.5
 RUBY_DEFAULT?=		2.4
 # Possible values: 4.5, 4.6, 4.7, 4.8
 SAMBA_DEFAULT?=		4.6
 # Possible values: base, openssl, openssl-devel, libressl, libressl-devel
 .if !defined(SSL_DEFAULT)
 #	If no preference was set, check for an installed base version
 #	but give an installed port preference over it.
 .  if	!defined(SSL_DEFAULT) && \
 	!exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so) && \
 	exists(${DESTDIR}/usr/include/openssl/opensslv.h)
 SSL_DEFAULT=	base
 .  else
 .    if exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so)
 .      if defined(PKG_BIN)
 # find installed port and use it for dependency
 .        if !defined(OPENSSL_INSTALLED)
 .          if defined(DESTDIR)
 PKGARGS=	-c ${DESTDIR}
 .          else
 PKGARGS=
 .          endif
 OPENSSL_INSTALLED!=	${PKG_BIN} ${PKGARGS} which -qo ${LOCALBASE}/lib/libcrypto.so || :
 .        endif
 .        if defined(OPENSSL_INSTALLED) && !empty(OPENSSL_INSTALLED)
 SSL_DEFAULT:=		${OPENSSL_INSTALLED:T}
 WARNING+=	"You have ${OPENSSL_INSTALLED} installed but do not have DEFAULT_VERSIONS+=ssl=${SSL_DEFAULT} set in your make.conf"
 .        endif
 .      else
 check-makevars::
 	@${ECHO_MSG} "You have a ${LOCALBASE}/lib/libcrypto.so file installed, but the framework is unable"
 	@${ECHO_MSG} "to determine what port it comes from."
 	@${ECHO_MSG} "Add DEFAULT_VERSIONS+=ssl=<openssl package name> to your /etc/make.conf and try again."
 	@${FALSE}
 .      endif
 .    endif
 .  endif
 # Make sure we have a default in the end
 SSL_DEFAULT?=	base
 .endif
 # Possible values: 8.5, 8.6, 8.7
 TCLTK_DEFAULT?=		8.6
 
 # Possible values: 4, 5
 VARNISH_DEFAULT?=	4
 
 .endif