Index: head/sysutils/u-boot-utilite/Makefile
===================================================================
--- head/sysutils/u-boot-utilite/Makefile	(revision 429082)
+++ head/sysutils/u-boot-utilite/Makefile	(revision 429083)
@@ -1,51 +1,51 @@
 # $FreeBSD$
 
 PORTNAME=	u-boot
 PORTVERSION=	2015.07
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	sysutils
 MASTER_SITES=	ftp://ftp.denx.de/pub/u-boot/:source1 \
 		http://www.compulab.co.il/wp-content/uploads/2015/10/:source2
 PKGNAMESUFFIX=	-utilite
 DISTFILES=	u-boot-2015.07.tar.bz2:source1 \
 		cm-fx6_u-boot_2015-10-18.zip:source2
 
 MAINTAINER=	martin@waschbuesch.de
 COMMENT=	Cross-build U-Boot loader for Utilite (and Utilite Pro)
 
 LICENSE=	GPLv2
 
-BUILD_DEPENDS=	${CROSS_GCC}:devel/arm-none-eabi-gcc
+BUILD_DEPENDS=	${CROSS_GCC}:devel/arm-none-eabi-gcc492
 
-CROSS_GCC=	arm-none-eabi-gcc
+CROSS_GCC=	arm-none-eabi-gcc-4.9.2
 
 EXTRA_PATCHES=	${WRKDIR}/cm-fx6-u-boot/u-boot/u-boot-2015.07-cm-fx6-3.patch:-p1
 
 NO_ARCH=	yes
 
 USES=		gmake
 
 PORTSCOUT=	ignore:1
 
 U_BOOT_DIR=	share/u-boot/${PORTNAME}${PKGNAMESUFFIX}
 
 MAKE_ARGS+=	ARCH=arm \
 		CC=${CROSS_GCC} \
 		CROSS_COMPILE=arm-none-eabi- \
 		HOSTCC=cc
 
 do-configure:
 	cd ${WRKSRC}; ${MAKE_CMD} ${MAKE_ARGS} cm_fx6_config
 
 # The build results in two output files: SPL, and u-boot.img.
 # Combine them into a single u-boot.imx so that there is only one file to be
 # copied onto the boot media starting at a 1K offset on the disk.
 CM_FX6_FIRMWARE=	${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/cm-fx6-firmware
 do-install:
 	cd ${WRKSRC}; ./tools/mkimage -n arch/arm/imx-common/spl_sd.cfg.cfgtmp -T imximage -e 0x00908000 -d spl/u-boot-spl.bin spl.img
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 	dd if=/dev/zero count=500 bs=1K | ${TR} '\000' '\377' > ${CM_FX6_FIRMWARE}
 	dd if=${WRKSRC}/spl.img of=${CM_FX6_FIRMWARE} bs=1K seek=1 conv=notrunc && dd if=${WRKSRC}/u-boot.img of=${CM_FX6_FIRMWARE} bs=1K seek=64 conv=notrunc
 	${INSTALL_DATA} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>