Index: head/news/husky-base/Makefile =================================================================== --- head/news/husky-base/Makefile (revision 362827) +++ head/news/husky-base/Makefile (revision 362828) @@ -1,29 +1,29 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= base PORTVERSION= 1.0 PORTREVISION= 3 CATEGORIES= news mail MASTER_SITES= SF/husky/huskybase/${PORTVERSION} DISTNAME= huskybase-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Common files for Husky Fidosoft Project CONFLICTS= husky-base-devel-[0-9]* WRKSRC= ${WRKDIR}/huskybse NO_BUILD= yes USERS= fido GROUPS= fido NO_STAGE= yes do-install: @${MKDIR} ${PREFIX}/etc/fido ${PREFIX}/share/doc/husky @${CHOWN} fido:fido ${PREFIX}/etc/fido @${INSTALL_DATA} ${WRKSRC}/huskymak.cfg ${PREFIX}/etc/fido .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-bsopack/Makefile =================================================================== --- head/news/husky-bsopack/Makefile (revision 362827) +++ head/news/husky-bsopack/Makefile (revision 362828) @@ -1,23 +1,23 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= bsopack PORTVERSION= 0.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/0.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Binkley-style outbound netmail packer LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf USES= makeinfo MAN1= bsopack.1 MANCOMPRESSED= yes INFO= bsopack NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-fidoconf/Makefile =================================================================== --- head/news/husky-fidoconf/Makefile (revision 362827) +++ head/news/husky-fidoconf/Makefile (revision 362828) @@ -1,42 +1,42 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= fidoconf PORTVERSION= 0.14.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/fidoconfig/0.14-release DISTNAME= ${PORTNAME}_${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Configuration library for Husky Fidosoft Project LIB_DEPENDS= libsmapi.so:${PORTSDIR}/news/husky-smapi RUN_DEPENDS= ${LOCALBASE}/etc/fido/huskymak.cfg:${PORTSDIR}/news/husky-base CONFLICTS= husky-fidoconf-devel-[0-9]* USES= makeinfo USE_LDCONFIG= yes MAKE_ARGS= ADDCDEFS=-fPIC INSTALL_TARGET= install install-man MAN1= dumpfcfg.1 fconf2.1 linkedto.1 tparser.1 MLINKS= fconf2.1 fconf2aquaed.1 \ fconf2.1 fconf2areasbbs.1 \ fconf2.1 fconf2fidogate.1 \ fconf2.1 fconf2golded.1 \ fconf2.1 fconf2msged.1 \ fconf2.1 fconf2squish.1 INFO= fidoconfig NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/dumpfcfg.1 @${REINPLACE_CMD} -e 's^/etc/fido/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/fconf2.1 \ ${WRKSRC}/man/tparser.1 .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-fidoconf-devel/Makefile =================================================================== --- head/news/husky-fidoconf-devel/Makefile (revision 362827) +++ head/news/husky-fidoconf-devel/Makefile (revision 362828) @@ -1,43 +1,43 @@ # Created by: Oleg Sharoiko # $FreeBSD$ PORTNAME= fidoconf DISTVERSION= 1.4-rc5 CATEGORIES= news mail MASTER_SITES= SF/husky/fidoconfig/1.4-RC5 -MAINTAINER= os@rsu.ru +MAINTAINER= ports@FreeBSD.org COMMENT= Configuration library for Husky Fidosoft Project. Development version LIB_DEPENDS= libsmapi.so:${PORTSDIR}/news/husky-smapi-devel RUN_DEPENDS= ${LOCALBASE}/etc/fido/huskymak.cfg:${PORTSDIR}/news/husky-base-devel CONFLICTS= husky-fidoconf-[0-9]* USE_LDCONFIG= yes INSTALL_TARGET= install install-man MAN1= dumpfcfg.1 fconf2.1 linked.1 linkedto.1 tparser.1 MLINKS= fconf2.1 fconf2aquaed.1 \ fconf2.1 fconf2areasbbs.1 \ fconf2.1 fconf2binkd.1 \ fconf2.1 fconf2dir.1 \ fconf2.1 fconf2fidogate.1 \ fconf2.1 fconf2golded.1 \ fconf2.1 fconf2msged.1 \ fconf2.1 fconf2na.pl.1 \ fconf2.1 fconf2squish.1 \ fconf2.1 fconf2tornado.1 \ fconf2.1 fecfg2fconf.1 INFO= fidoconfig NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/dumpfcfg.1 @${REINPLACE_CMD} -e 's^/etc/fido/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/fconf2.1 \ ${WRKSRC}/man/tparser.1 .include "${.CURDIR}/../husky-base-devel/Makefile.inc" .include Index: head/news/husky-hpt/Makefile =================================================================== --- head/news/husky-hpt/Makefile (revision 362827) +++ head/news/husky-hpt/Makefile (revision 362828) @@ -1,46 +1,46 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= hpt PORTVERSION= 1.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Highly Portable Tosser (full-featured FTN tosser) LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf CONFLICTS= husky-hpt-devel-[0-9]* .if !defined(WITHOUT_PERL) MAKE_ARGS+= PERL=1 USES= perl5 .else MAKE_ARGS+= PERL=0 .endif USES+= makeinfo MAN1= hpt.1 hptlink.1 hpttree.1 txt2pkt.1 MANCOMPRESSED= yes INFO= hpt NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/path/to/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/hptlink.1 @${REINPLACE_CMD} -e 's^/some/path/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/hpttree.1 @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/txt2pkt.1 post-build: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} all post-install: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} install .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-hpt-devel/Makefile =================================================================== --- head/news/husky-hpt-devel/Makefile (revision 362827) +++ head/news/husky-hpt-devel/Makefile (revision 362828) @@ -1,50 +1,50 @@ # Created by: Oleg Sharoiko # $FreeBSD$ PORTNAME= hpt DISTVERSION= 1.4-rc5 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.4-RC5 -MAINTAINER= os@rsu.ru +MAINTAINER= ports@FreeBSD.org COMMENT= Highly Portable Tosser (full-featured FTN tosser). Development version LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf-devel CONFLICTS= husky-hpt-[0-9]* .if !defined(WITHOUT_PERL) MAKE_ARGS+= PERL=1 USES= perl5 .else MAKE_ARGS+= PERL=0 .endif MAN1= hpt.1 hptlink.1 hpttree.1 pktinfo.1 txt2pkt.1 MANCOMPRESSED= yes INFO= hpt DOCSDIR= ${PREFIX}/share/doc/husky PORTDOCS= hpt.html NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/path/to/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/hptlink.1 @${REINPLACE_CMD} -e 's^/some/path/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/hpttree.1 @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/txt2pkt.1 post-build: .if !defined(NOPORTDOCS) @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} all .endif post-install: .if !defined(NOPORTDOCS) @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} install .endif .include "${.CURDIR}/../husky-base-devel/Makefile.inc" .include Index: head/news/husky-hptkill/Makefile =================================================================== --- head/news/husky-hptkill/Makefile (revision 362827) +++ head/news/husky-hptkill/Makefile (revision 362828) @@ -1,22 +1,22 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= hptkill PORTVERSION= 1.10.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.10-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Area killing utility LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf MAN1= hptkill.1 MANCOMPRESSED= yes PLIST_FILES= bin/hptkill NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-hptsqfix/Makefile =================================================================== --- head/news/husky-hptsqfix/Makefile (revision 362827) +++ head/news/husky-hptsqfix/Makefile (revision 362828) @@ -1,22 +1,22 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= hptsqfix PORTVERSION= 1.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Fix message base LIB_DEPENDS= libsmapi.so:${PORTSDIR}/news/husky-smapi MAN1= hptsqfix.1 MANCOMPRESSED= yes PLIST_FILES= bin/hptsqfix NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-hpucode/Makefile =================================================================== --- head/news/husky-hpucode/Makefile (revision 362827) +++ head/news/husky-hpucode/Makefile (revision 362828) @@ -1,23 +1,23 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= hpucode PORTVERSION= 1.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Scan for UUE in message base LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf USES= makeinfo MAN1= hpucode.1 MANCOMPRESSED= yes INFO= hpucode NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-htick/Makefile =================================================================== --- head/news/husky-htick/Makefile (revision 362827) +++ head/news/husky-htick/Makefile (revision 362828) @@ -1,34 +1,34 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= htick PORTVERSION= 1.0.4 PORTREVISION= 3 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.0-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= FTN file ticker LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf CONFLICTS= husky-htick-devel-[0-9]* USES= makeinfo MAN1= htick.1 INFO= htick NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/htick.1 post-build: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} all post-install: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} install .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-htick-devel/Makefile =================================================================== --- head/news/husky-htick-devel/Makefile (revision 362827) +++ head/news/husky-htick-devel/Makefile (revision 362828) @@ -1,36 +1,36 @@ # Created by: Andrew Clarke # $FreeBSD$ PORTNAME= htick DISTVERSION= 1.4-rc5 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.4-RC5 PKGNAMESUFFIX= -devel -MAINTAINER= mail@ozzmosis.com +MAINTAINER= ports@FreeBSD.org COMMENT= FTN File ticker, development version LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf-devel CONFLICTS= husky-htick-[0-9]* MAN1= htick.1 INFO= htick PLIST_FILES= bin/htick \ share/doc/husky/htick.html NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/fido/etc/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/man/htick.1 post-build: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} all post-install: @cd ${WRKSRC}/doc && ${MAKE_CMD} ${MAKE_ARGS} install .include "${.CURDIR}/../husky-base-devel/Makefile.inc" .include Index: head/news/husky-msged/Makefile =================================================================== --- head/news/husky-msged/Makefile (revision 362827) +++ head/news/husky-msged/Makefile (revision 362828) @@ -1,29 +1,29 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= msged PORTVERSION= 6.2RC1 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/6.2%20RC1 DISTNAME= ${PORTNAME}-${PORTVERSION}-stable-src EXTRACT_SUFX= .tgz -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Msged/TE (full-featured FTN mail reader) LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf USES= makeinfo MAKE_ARGS= MSGEDCFG="\\\"~/.msged\\\"" INFO= msged NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's,html info,info,' \ -e 's,install-html install-info,install-info,' \ ${WRKSRC}/doc/manual/makefile.husky .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-nltools/Makefile =================================================================== --- head/news/husky-nltools/Makefile (revision 362827) +++ head/news/husky-nltools/Makefile (revision 362828) @@ -1,18 +1,18 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= nltools PORTVERSION= 1.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Nodelist tools LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-smapi/Makefile =================================================================== --- head/news/husky-smapi/Makefile (revision 362827) +++ head/news/husky-smapi/Makefile (revision 362828) @@ -1,21 +1,21 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= smapi PORTVERSION= 2.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/2.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= MSGAPI for Husky Fidosoft Project CONFLICTS= husky-smapi-devel-[0-9]* MAKE_ARGS= ADDCDEFS=-fPIC USE_LDCONFIG= yes NO_STAGE= yes .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/husky-smapi-devel/Makefile =================================================================== --- head/news/husky-smapi-devel/Makefile (revision 362827) +++ head/news/husky-smapi-devel/Makefile (revision 362828) @@ -1,18 +1,18 @@ # Created by: Oleg Sharoiko # $FreeBSD$ PORTNAME= smapi DISTVERSION= 2.4-rc5 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/2.4-RC5 -MAINTAINER= os@rsu.ru +MAINTAINER= ports@FreeBSD.org COMMENT= MSGAPI for Husky Fidosoft Project. Development version CONFLICTS= husky-smapi-[0-9]* USE_LDCONFIG= yes NO_STAGE= yes .include "${.CURDIR}/../husky-base-devel/Makefile.inc" .include Index: head/news/husky-sqpack/Makefile =================================================================== --- head/news/husky-sqpack/Makefile (revision 362827) +++ head/news/husky-sqpack/Makefile (revision 362828) @@ -1,26 +1,26 @@ # Created by: Max Khon # $FreeBSD$ PORTNAME= sqpack PORTVERSION= 1.2.4 PORTREVISION= 2 CATEGORIES= news mail MASTER_SITES= SF/husky/${PORTNAME}/1.2-release DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= fjoe@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Message base packer LIB_DEPENDS= libfidoconfig.so:${PORTSDIR}/news/husky-fidoconf MAN1= sqpack.1 MANCOMPRESSED= yes PLIST_FILES= bin/sqpack NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's^/etc/fido/config^${PREFIX}/etc/fido/config^' \ ${WRKSRC}/sqpack.1 .include "${.CURDIR}/../husky-base/Makefile.inc" .include Index: head/news/inn/Makefile =================================================================== --- head/news/inn/Makefile (revision 362827) +++ head/news/inn/Makefile (revision 362828) @@ -1,246 +1,246 @@ # Created by: torstenb # $FreeBSD$ PORTNAME?= inn PORTVERSION?= 2.5.3 PORTREVISION?= 0 CATEGORIES= news ipv6 # Master distribution broken MASTER_SITES?= ${MASTER_SITE_ISC} MASTER_SITE_SUBDIR?= ${PORTNAME} #MASTER_SITES= ${MASTER_SITE_LOCAL} #MASTER_SITE_SUBDIR= fluffy -MAINTAINER= fluffy@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= InterNetNews -- the Internet meets Netnews BUILD_DEPENDS= p5-GD>=0:${PORTSDIR}/graphics/p5-GD \ p5-MIME-Tools>=0:${PORTSDIR}/mail/p5-MIME-Tools RUN_DEPENDS:= ${BUILD_DEPENDS} USE_RC_SUBR= innd SUB_FILES= pkg-install LATEST_LINK= ${PORTNAME}${PKGNAMESUFFIX} USES= gmake perl5 CONFLICTS?= inn-stable-[0-9]* inn-current-[0-9]* OPTIONS_DEFINE= PYTHON KERBEROS SASL KEYWORDS BERKELEYDB OPENSSL \ TAGGED_HASH LARGE_FILES GNUPG OPTIONS_DEFAULT= KEYWORDS PYTHON_DESC= Embedded Python module support KERBEROS_DESC= Enable Kerberos v5 (for auth_krb5) SASL_DESC= Enable SASL (for imapfeed authentication) TAGGED_HASH_DESC= Use tagged hash table for history LARGE_FILES_DESC= Support for files larger than 2GB KEYWORDS_DESC= Automatic keyword generation support BERKELEYDB_DESC= Enable BerkeleyDB (for ovdb overview method) OPENSSL_DESC= Enable OpenSSL (for NNTP over TLS/SSL support) GNUPG_DESC= GnuPG support (for pgpverify control message) VARBASE?= /var NO_STAGE= yes .include "Makefile.layout" HAS_CONFIGURE= yes CONFIGURE_ENV+= LOCALBASE=${LOCALBASE} CONFIGURE_ENV+= ac_cv_prog_AWK="${AWK}" CONFIGURE_ARGS+= --mandir=${MANPREFIX}/man \ --prefix=${INN_NEWSBASE} \ --with-spool-dir=${INN_NEWSSPOOL} \ --with-log-dir=${INN_LOGDIR} \ --with-tmp-dir=${INN_TMPDIR} \ --sysconfdir=${INN_ETCDIR} \ --with-run-dir=${INN_RUNDIR} \ --with-db-dir=${INN_DBDIR} \ --datarootdir=${INN_SHAREDIR} \ --enable-ipv6 --with-perl .include .if ${PORT_OPTIONS:MBERKELEYDB} USE_BDB= 44+ CONFIGURE_ENV+= DB_VER=db${BDB_VER} CONFIGURE_ENV+= DB_LIB=${BDB_LIB_NAME} CONFIGURE_ARGS+= --with-berkeleydb=${LOCALBASE} .endif .if ${PORT_OPTIONS:MKERBEROS} . if exists(${LOCALBASE}/bin/krb5-config) LIB_DEPENDS+= libgssapi_krb5.so:${PORTSDIR}/security/krb5 CONFIGURE_ARGS+= --with-kerberos=${LOCALBASE} . else CONFIGURE_ARGS+= --with-kerberos=/usr . endif CONFIGURE_ENV+= ac_cv_search_krb5_parse_name="-lcrypt -lcrypto -lkrb5 -lasn1 -lroken -lhx509" CONFIGURE_ENV+= ac_cv_func_krb5_init_ets=yes MAN8+= auth_krb5.8 PLIST_SUB+= KRB5="" .else CONFIGURE_ARGS+= --without-kerberos PLIST_SUB+= KRB5="@comment " .endif .if ${PORT_OPTIONS:MPYTHON} USE_PYTHON= yes CONFIGURE_ARGS+= --with-python .endif .if ${PORT_OPTIONS:MLARGE_FILES} CONFIGURE_ARGS+= --enable-largefiles . if ${PORT_OPTIONS:MTAGGED_HASH} IGNORE= cannot be compiled with both LARGE_FILES and TAGGED_HASH: please re-run make config . endif .endif .if ${PORT_OPTIONS:MKEYWORDS} CONFIGURE_ARGS+= --enable-keywords .endif .if ${PORT_OPTIONS:MSASL} CONFIGURE_ARGS+= --with-sasl=${LOCALBASE} LIB_DEPENDS+= libsasl2.so:${PORTSDIR}/security/cyrus-sasl2 .endif .if ${PORT_OPTIONS:MTAGGED_HASH} CONFIGURE_ARGS+= --enable-tagged-hash DBZ_FILES= dir pag PLIST_SUB+= WITH_TAGGED_HASH="" PLIST_SUB+= WITHOUT_TAGGED_HASH="@comment " .else DBZ_FILES= dir hash index PLIST_SUB+= WITH_TAGGED_HASH="@comment " PLIST_SUB+= WITHOUT_TAGGED_HASH="" .endif .if ${PORT_OPTIONS:MOPENSSL} USE_OPENSSL= yes CONFIGURE_ARGS+= --with-openssl=${OPENSSLBASE} .endif .if ${PORT_OPTIONS:MGNUPG} # Although pgpverify needs gpgv/gpgv2, # checking 'gpg' is the shortest way to check any version of GnuPG installed. BUILD_DEPENDS+= gpg:${PORTSDIR}/security/gnupg RUN_DEPENDS+= gpg:${PORTSDIR}/security/gnupg .endif PORTDOCS= CONTRIBUTORS HACKING INSTALL LICENSE MANIFEST NEWS README TODO HEADERS= clibrary.h config.h dbz.h libinn.h storage.h MAN1= convdate.1 fastrm.1 getlist.1 grephistory.1 inews.1 innconfval.1 \ innmail.1 nntpget.1 pgpverify.1 rnews.1 shlock.1 \ shrinkfile.1 simpleftp.1 sm.1 pullnews.1 MAN3= INN::Config.3pm INN::Utils::Shlock.3pm clientlib.3 dbz.3 inndcomm.3 libauth.3 \ libinn.3 libinnhist.3 libstorage.3 list.3 qio.3 tst.3 uwildmat.3 MAN5= active.5 active.times.5 buffindexed.conf.5 control.ctl.5 \ cycbuff.conf.5 distrib.pats.5 distributions.5 expire.ctl.5 history.5 \ incoming.conf.5 inn.conf.5 innfeed.conf.5 innwatch.ctl.5 \ moderators.5 motd.news.5 newsfeeds.5 newsgroups.5 \ newslog.5 nnrpd.track.5 nntpsend.ctl.5 ovdb.5 \ passwd.nntp.5 radius.conf.5 readers.conf.5 \ storage.conf.5 subscriptions.5 MAN8= actsync.8 archive.8 batcher.8 buffchan.8 \ ckpasswd.8 cnfsheadconf.8 cnfsstat.8 controlchan.8 ctlinnd.8 \ cvtbatch.8 docheckgroups.8 domain.8 expire.8 expireover.8 \ expirerm.8 filechan.8 \ ident.8 inncheck.8 innbind.8 innd.8 inndf.8 innfeed.8 innreport.8 \ innstat.8 innupgrade.8 innwatch.8 innxbatch.8 innxmit.8 mailpost.8 makedbz.8 \ makehistory.8 mod-active.8 news.daily.8 news2mail.8 ninpaths.8 \ nnrpd.8 nntpsend.8 ovdb_init.8 ovdb_monitor.8 ovdb_server.8 \ ovdb_stat.8 overchan.8 perl-nocem.8 procbatch.8 prunehistory.8 \ radius.8 rc.news.8 scanlogs.8 scanspool.8 send-nntp.8 send-uucp.8 \ sendinpaths.8 tally.control.8 tdx-util.8 tinyleaf.8 writelog.8 MLINKS= actsync.8 actsyncd.8 docheckgroups.8 localgroups.5 perl-nocem.8 nocem.ctl.5 \ innfeed.8 imapfeed.8 motd.news.5 motd.innd.5 motd.news.5 motd.nnrpd.5 \ ninpaths.8 inpaths.8 TO_BE_STRIPPED= bin/auth/resolv/domain bin/auth/resolv/ident \ bin/auth/passwd/ckpasswd bin/auth/passwd/radius bin/rnews.libexec/decode \ bin/rnews.libexec/encode bin/tdx-util bin/innd bin/nnrpd \ bin/innfeed bin/imapfeed bin/convdate bin/expire \ bin/expireover bin/fastrm bin/grephistory bin/makedbz bin/makehistory \ bin/prunehistory bin/ctlinnd bin/getlist bin/inews bin/innconfval \ bin/ovdb_init bin/ovdb_monitor bin/ovdb_server bin/ovdb_stat bin/rnews \ bin/sm bin/actsync bin/archive bin/batcher bin/buffchan bin/cvtbatch \ bin/filechan bin/inndf bin/innxmit bin/innxbatch bin/ninpaths bin/nntpget \ bin/overchan bin/shlock bin/shrinkfile CONFIG_FILES= actsync.cfg actsync.ign buffindexed.conf control.ctl \ control.ctl.local cycbuff.conf \ distrib.pats distributions \ expire.ctl localgroups incoming.conf inn.conf innfeed.conf \ innreport.conf innshellvars.local innshellvars.pl.local innshellvars.tcl.local \ innwatch.ctl moderators motd.innd motd.nnrpd news2mail.cf \ newsfeeds nocem.ctl \ nnrpd.track nntpsend.ctl ovdb.conf \ passwd.nntp radius.conf readers.conf send-uucp.cf \ storage.conf subscriptions SUB_LIST+= EGDIR="${EXAMPLESDIR:C,^${PREFIX},\\$\\${PREFIX},}" PLIST_SUB+= ETCFILES="${CONFIG_FILES}" .include post-patch: @${REINPLACE_CMD} -E 's!\$$[{(]PATHETC[})]!${EXAMPLESDIR}!g' \ ${WRKSRC}/site/Makefile @${REINPLACE_CMD} -e 's!et/com_err\.h!com_err.h!g' \ -e 's!-lk5crypto!!g' \ ${WRKSRC}/configure @${ECHO_CMD} '/^$$D$$(PATH_HISTORY)' > ${WRKDIR}/ex.script @${ECHO_CMD} '+' >> ${WRKDIR}/ex.script @${ECHO_CMD} 'mark t' >> ${WRKDIR}/ex.script @${ECHO_CMD} '/^$$' >> ${WRKDIR}/ex.script @${ECHO_CMD} "'t, d" >> ${WRKDIR}/ex.script @${ECHO_CMD} 'wq!' >> ${WRKDIR}/ex.script @cd ${WRKDIR} && ex ${WRKSRC}/site/Makefile < ex.script > /dev/null pre-install: @${SETENV} "PKG_PREFIX=${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL post-build: @${FIND} ${WRKSRC} -name "inn.conf" \ | ${XARGS} ${REINPLACE_CMD} -e 's/^pathhost:.*/pathhost: host.example.com/' post-install: .if !defined(WITHOUT_STRIP) . for FILE in ${TO_BE_STRIPPED} [ -e ${INN_NEWSBASE}/${FILE} ] && ${STRIP_CMD} ${INN_NEWSBASE}/${FILE} . endfor .endif ${CHOWN} ${MANOWN}:${MANGRP} ${PREFIX}/man ${PREFIX}/man/man1 ${PREFIX}/man/man3 \ ${PREFIX}/man/man5 ${PREFIX}/man/man8 ${MKDIR} ${INN_NEWSSPOOL} .if !defined(NOPORTDOCS) ${MKDIR} ${DOCSDIR} . for FILE in ${PORTDOCS} ${INSTALL_DATA} ${WRKSRC}/${FILE} ${DOCSDIR} . endfor .endif ${MKDIR} ${INN_NEWSBASE}/include # XXX .for FILE in ${HEADERS} # XXX ${INSTALL_DATA} ${WRKSRC}/include/${FILE} ${INN_NEWSBASE}/include/ # XXX .endfor ${CHOWN} ${BINOWN}:news ${INN_NEWSBASE}/bin/auth/passwd/ckpasswd ${CHMOD} 4755 ${INN_NEWSBASE}/bin/auth/passwd/ckpasswd @${SETENV} "PKG_PREFIX=${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} CHECK-CONF ${INN_ETCDIR} @(if [ ! -f ${INN_DBDIR}/history ] ; then \ ${ECHO} 'Creating empty history database...' ; \ cd ${INN_DBDIR} ; \ ${TOUCH} history ; \ ${CHMOD} 644 history ; \ ${CHOWN} news:news history ; \ su -fm news -c "${INN_NEWSBASE}/bin/makedbz -i" ; \ for s in ${DBZ_FILES} ; do \ ${MV} history.n.$${s} history.$${s} ; \ done ; \ fi) @${SETENV} "PKG_PREFIX=${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL PORTMODE .include Index: head/ports-mgmt/bpm/Makefile =================================================================== --- head/ports-mgmt/bpm/Makefile (revision 362827) +++ head/ports-mgmt/bpm/Makefile (revision 362828) @@ -1,38 +1,38 @@ # Created by: sethk # $FreeBSD$ PORTNAME= bpm PORTVERSION= 0.4.1b PORTREVISION= 19 CATEGORIES= ports-mgmt MASTER_SITES= http://www.meowfishies.com/code/bpm/ EXTRACT_SUFX= .tgz -MAINTAINER= sethk@meowfishies.com +MAINTAINER= ports@FreeBSD.org COMMENT= Graphical BSD ports collection manager RUN_DEPENDS= portupgrade:${PORTSDIR}/ports-mgmt/portupgrade \ gnomesu:${PORTSDIR}/security/libgnomesu \ gdialog:${PORTSDIR}/x11/zenity USES= desktop-file-utils pkgconfig USE_GNOME= gtk20 MAKE_ENV+= OSTYPE="${OPSYS}" SUB_FILES= bpm.desktop NO_STAGE= yes post-patch: @${FIND} ${WRKSRC} -name Makefile | ${XARGS} \ ${REINPLACE_CMD} -e "s|-lintl|-lintl -L${LOCALBASE}/lib|g" # GnomeVFS needs pthread; bpm may use GnomeVFS (via GtkFileChooser) @${REINPLACE_CMD} -e 's|^CFLAGS+=|& ${PTHREAD_CFLAGS}|; \ s|^LDLIBS+=|& ${PTHREAD_LIBS}|' ${WRKSRC}/src/Makefile @${REINPLACE_CMD} -e 's|||g' \ ${WRKSRC}/src/*.h post-install: ${INSTALL_DATA} ${WRKDIR}/bpm.desktop ${PREFIX}/share/applications/bpm.desktop .include Index: head/ports-mgmt/bxpkg/Makefile =================================================================== --- head/ports-mgmt/bxpkg/Makefile (revision 362827) +++ head/ports-mgmt/bxpkg/Makefile (revision 362828) @@ -1,30 +1,30 @@ # Created by: Kostas Petrikas # $FreeBSD$ PORTNAME= bxpkg DISTVERSION= 0.0.4_0 PORTREVISION= 2 CATEGORIES= ports-mgmt MASTER_SITES= http://bxpkg.bsdroot.lv/files/ DISTNAME= ${PORTNAME}-${DISTVERSION} -MAINTAINER= kpetrikas@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= GTK+ based tool to manage binary packages on BSD systems USES= pkgconfig USE_XORG= x11 USE_GNOME= gtk20 PLIST_FILES= bin/bxpkg USE_BZIP2= YES WRKSRC= ${WRKDIR}/${PORTNAME}-${DISTVERSION} NO_STAGE= yes .include .if ${OSVERSION} < 800000 LIB_DEPENDS+= libarchive.so:${PORTSDIR}/archivers/libarchive .endif .include Index: head/ports-mgmt/pkgfe/Makefile =================================================================== --- head/ports-mgmt/pkgfe/Makefile (revision 362827) +++ head/ports-mgmt/pkgfe/Makefile (revision 362828) @@ -1,32 +1,32 @@ # Created by: Sulev-Madis Silber # $FreeBSD$ PORTNAME= pkgfe PORTVERSION= 20090228 CATEGORIES= ports-mgmt MASTER_SITES= http://kodu.neti.ee/~madis555/pkgfe/releases/ \ http://ketas.si.pri.ee/pkgfe/releases/ -MAINTAINER= madis555@hot.ee +MAINTAINER= ports@FreeBSD.org COMMENT= Ncurses frontend for ports collection RUN_DEPENDS= portupgrade:${PORTSDIR}/ports-mgmt/portupgrade \ portaudit:${PORTSDIR}/ports-mgmt/portaudit MAN8= pkgfe.8 NO_BUILD= yes NO_STAGE= yes do-install: ${REINPLACE_CMD} -e 's|%PREFIX%|${PREFIX}|g' ${WRKSRC}/pkgfe ${INSTALL_SCRIPT} ${WRKSRC}/pkgfe ${PREFIX}/sbin/pkgfe ${INSTALL_DATA} ${WRKSRC}/pkgfe.conf ${PREFIX}/etc/pkgfe.conf.sample ${INSTALL_MAN} ${WRKSRC}/pkgfe.8 ${PREFIX}/man/man8 post-install: @if [ ! -f ${PREFIX}/etc/pkgfe.conf ]; then \ ${CP} -p ${PREFIX}/etc/pkgfe.conf.sample ${PREFIX}/etc/pkgfe.conf ; \ fi .include Index: head/ports-mgmt/portcheckout/Makefile =================================================================== --- head/ports-mgmt/portcheckout/Makefile (revision 362827) +++ head/ports-mgmt/portcheckout/Makefile (revision 362828) @@ -1,20 +1,20 @@ # Created by: wosch # $FreeBSD$ PORTNAME= portcheckout PORTVERSION= 2.0 PORTREVISION= 1 CATEGORIES= ports-mgmt MASTER_SITES= http://wolfram.schneider.org/src/ -MAINTAINER= wosch@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Checkout and build ports and all depending ports USES= shebangfix perl5 SHEBANG_FILES= portcheckout.pl MAN1= portcheckout.1 MANCOMPRESSED= maybe PLIST_FILES= bin/portcheckout NO_STAGE= yes .include Index: head/ports-mgmt/prhistory/Makefile =================================================================== --- head/ports-mgmt/prhistory/Makefile (revision 362827) +++ head/ports-mgmt/prhistory/Makefile (revision 362828) @@ -1,44 +1,44 @@ # Created by: "Waitman Gobble" # $FreeBSD$ PORTNAME= prhistory PORTVERSION= 1.0 PORTREVISION= 2 CATEGORIES= ports-mgmt MASTER_SITES= GH -MAINTAINER= waitman@waitman.net +MAINTAINER= ports@FreeBSD.org COMMENT= PR review for ports LICENSE= PRHISTORY LICENSE_NAME= PRHISTORY BSD LICENSE LICENSE_FILE= ${WRKSRC}/LICENSE LICENSE_PERMS= ${_LICENSE_PERMS_DEFAULT} LIB_DEPENDS= libcurl.so:${PORTSDIR}/ftp/curl \ libsqlite3.so:${PORTSDIR}/databases/sqlite3 USE_GITHUB= yes GH_ACCOUNT= waitman GH_TAGNAME= ${GH_COMMIT} GH_COMMIT= 9113c59 MAN7= prhistory.7 SUB_FILES= pkg-message PORTDOCS= * NO_STAGE= yes OPTIONS_DEFINE= DOCS .include post-install: .if ${PORT_OPTIONS:MDOCS} @${MKDIR} ${DOCSDIR} ${INSTALL_DATA} ${WRKSRC}/README ${DOCSDIR} .endif @${CAT} ${PKGMESSAGE} .include Index: head/print/abc2mtex/Makefile =================================================================== --- head/print/abc2mtex/Makefile (revision 362827) +++ head/print/abc2mtex/Makefile (revision 362828) @@ -1,40 +1,40 @@ # Created by: joerg # $FreeBSD$ PORTNAME= abc2mtex PORTVERSION= 1.6.1 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_TEX_CTAN} MASTER_SITE_SUBDIR= support/abc2mtex DISTNAME= ${PORTNAME}${PORTVERSION} -MAINTAINER= joerg@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Music TeX converter from "abc" to MusiXTeX format RUN_DEPENDS= musixtex:${PORTSDIR}/print/musixtex NO_WRKSUBDIR= yes TEXMF= ${PREFIX}/share/texmf EXAMPLE_FILES= English.abc Jigs.abc Reels.abc Strspys.abc DOC_FILES= usrguide.ps BIN_FILES= abc2mtex abc2mtex \ search abc_search \ sort_in abc_sort_in NO_STAGE= yes do-install: cd ${WRKSRC}; \ ${MKDIR} ${TEXMF}/doc/${PORTNAME}; \ ${INSTALL_DATA} ${DOC_FILES} ${TEXMF}/doc/${PORTNAME}; \ ${MKDIR} ${TEXMF}/doc/${PORTNAME}/examples; \ ${INSTALL_DATA} ${EXAMPLE_FILES} ${TEXMF}/doc/${PORTNAME}/examples; \ ${INSTALL_DATA} header.tex ${TEXMF}/tex/abc2mtex_header.tex set -- ${BIN_FILES}; \ while [ $$# -gt 0 ] ; do \ src=$$1; tgt=$$2; shift; shift; \ ${ECHO} "Installing $$src as ${PREFIX}/bin/$$tgt"; \ ${INSTALL_PROGRAM} ${WRKSRC}/$$src ${PREFIX}/bin/$$tgt; \ done .include Index: head/print/bophook/Makefile =================================================================== --- head/print/bophook/Makefile (revision 362827) +++ head/print/bophook/Makefile (revision 362828) @@ -1,42 +1,42 @@ # Created by: Hiroto Kagotani # $FreeBSD$ PORTNAME= bophook PORTVERSION= 0.02 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_TEX_CTAN} MASTER_SITE_SUBDIR= macros/latex/contrib/ DISTNAME= ${PORTNAME} -MAINTAINER= hiroto.kagotani@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= Style file providing a beginning-of-page hook for LaTeX WRKSRC= ${WRKDIR}/${PORTNAME} USES= zip USE_TEX= latex PLIST= ${WRKDIR}/pkg-plist TEXMFDIR= share/texmf-local MKTEXLSR= ${LOCALBASE}/bin/mktexlsr CLASSDIR= ${TEXMFDIR}/tex/latex/${PORTNAME} CLASS_FILES= ${PORTNAME}.sty NO_STAGE= yes do-build: cd ${WRKSRC} && latex ${PORTNAME}.ins pre-install: ${ECHO_CMD} "${CLASSDIR}/${CLASS_FILES}" > ${PLIST} ${ECHO_CMD} "@dirrm ${CLASSDIR}" >> ${PLIST} ${ECHO_CMD} "@exec ${MKTEXLSR}" >> ${PLIST} ${ECHO_CMD} "@unexec ${MKTEXLSR}" >> ${PLIST} do-install: @${MKDIR} ${PREFIX}/${CLASSDIR} ${INSTALL_DATA} ${CLASS_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${CLASSDIR} post-install: ${MKTEXLSR} .include Index: head/print/cups-samba/Makefile =================================================================== --- head/print/cups-samba/Makefile (revision 362827) +++ head/print/cups-samba/Makefile (revision 362828) @@ -1,41 +1,41 @@ # Created by: John Merryweather Cooper # $FreeBSD$ PORTNAME= cups-samba PORTVERSION= 6.0 PORTREVISION= 7 CATEGORIES= print net MASTER_SITES= ${MASTER_SITE_EASYSW} MASTER_SITE_SUBDIR=cups/windows DISTNAME= cups-windows-${PORTVERSION}-source -MAINTAINER= mwisnicki+freebsd@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= The Common UNIX Printing System: MS Windows client drivers RUN_DEPENDS= smbspool:${PORTSDIR}/${SAMBA_PORT} \ ${LOCALBASE}/sbin/cupsd:${PORTSDIR}/print/cups-base SAMBA_PORT?= net/samba36 NO_BUILD= yes NO_WRKSUBDIR= yes DATADIR= ${PREFIX}/share/cups DRIVER_FILES= cups6.inf cups6.ini cupsps6.dll cupsui6.dll SUB_FILES= pkg-message NO_STAGE= yes pre-install: ${MKDIR} ${DATADIR}/drivers do-install: cd ${WRKSRC} && \ for DRVFILE in ${DRIVER_FILES}; do \ ${INSTALL_DATA} ${WRKSRC}/cups-windows-${PORTVERSION}/i386/$${DRVFILE} ${DATADIR}/drivers; \ done post-install: @${CAT} ${PKGMESSAGE} .include Index: head/print/examplep/Makefile =================================================================== --- head/print/examplep/Makefile (revision 362827) +++ head/print/examplep/Makefile (revision 362828) @@ -1,45 +1,45 @@ # Created by: Hiroto Kagotani # $FreeBSD$ PORTNAME= examplep PORTVERSION= 0.04 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_TEX_CTAN} MASTER_SITE_SUBDIR= macros/latex2e/contrib/ DISTNAME= ${PORTNAME} -MAINTAINER= hiroto.kagotani@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= LaTeX style files for typesetting verbatim source code listings WRKSRC= ${WRKDIR}/${PORTNAME} USES= zip USE_TEX= latex PLIST= ${WRKDIR}/pkg-plist TEXMFDIR= share/texmf-local MKTEXLSR= ${LOCALBASE}/bin/mktexlsr CLASSDIR= ${TEXMFDIR}/tex/latex/${PORTNAME} CLASS_FILES= ${PORTNAME}.sty codep.sty verbfwr.sty NO_STAGE= yes do-build: pre-install: ${RM} -f ${PLIST} .for F in ${CLASS_FILES} ${ECHO_CMD} "${CLASSDIR}/${F}" >> ${PLIST} .endfor ${ECHO_CMD} "@dirrm ${CLASSDIR}" >> ${PLIST} ${ECHO_CMD} "@exec ${MKTEXLSR}" >> ${PLIST} ${ECHO_CMD} "@unexec ${MKTEXLSR}" >> ${PLIST} do-install: @${MKDIR} ${PREFIX}/${CLASSDIR} ${ECHO_CMD} ${CLASS_FILES} ${INSTALL_DATA} ${CLASS_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${CLASSDIR} post-install: ${MKTEXLSR} .include Index: head/print/freetype-tools/Makefile =================================================================== --- head/print/freetype-tools/Makefile (revision 362827) +++ head/print/freetype-tools/Makefile (revision 362828) @@ -1,61 +1,61 @@ # Created by: rafan@infor.org # $FreeBSD$ PORTNAME= freetype-tools PORTVERSION= 1.3.1 PORTREVISION= 9 CATEGORIES= print MASTER_SITES= SF/freetype/freetype/${PORTVERSION} \ http://sunsite.cnlab-switch.ch/ftp/mirror/freetype/freetype1/ \ http://www.funet.fi/pub/mirrors/ftp.freetype.org/freetype1/ \ http://ftp.sunet.se/pub/text-processing/freetype/freetype1/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,graphics/freetype/&,} \ ftp://ftp.freetype.org/freetype/freetupe1/ DISTNAME= freetype-${PORTVERSION} -MAINTAINER= rafan@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Tools for FreeType 1 LIB_DEPENDS= libttf.so:${PORTSDIR}/print/freetype RUN_DEPENDS= t1asm:${PORTSDIR}/print/t1utils BUILD_DEPENDS:= ${RUN_DEPENDS} USE_TEX= base texmf USES= gmake USE_AUTOTOOLS= libtool CONFIGURE_ARGS= --disable-nls --enable-static --enable-shared TEXMFMAIN= ${PREFIX}/share/texmf MAN1= ttf2bdf.1 ttf2tfm.1 ttf2pk.1 PORTSCOUT= limit:^1\. NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's|$${CONFIG_SHELL-/bin/sh} $$ac_aux_dir|$$ac_aux_dir|' \ ${WRKSRC}/configure @${FIND} ${WRKSRC} -name Makefile.in | ${XARGS} ${REINPLACE_CMD} -e \ 's|LIBTOOL =.*|LIBTOOL = ${LIBTOOL}|' @${FIND} ${WRKSRC} -name '*.orig' -delete @${REINPLACE_CMD} -e 's|^PROGRAMS = t1asm|PROGRAMS =|' \ ${WRKSRC}/contrib/ttf2pfb/Makefile.in post-build: @cd ${WRKSRC}/contrib/ttf2bdf && ./configure --prefix=${PREFIX} && ${MAKE_CMD} @cd ${WRKSRC}/contrib/ttf2pfb && ./configure --prefix=${PREFIX} && ${MAKE_CMD} @cd ${WRKSRC}/contrib/ttf2pk && ./configure --prefix=${PREFIX} --with-kpathsea-dir=${LOCALBASE} && ${MAKE_CMD} @cd ${WRKSRC}/contrib/ttfbanner && ./configure --prefix=${PREFIX} && ${MAKE_CMD} do-install: @cd ${WRKSRC}/contrib/ttf2bdf && ${MAKE_CMD} install @cd ${WRKSRC}/contrib/ttf2pfb && ${MAKE_CMD} install @cd ${WRKSRC}/contrib/ttf2pk && ${MAKE_CMD} install @cd ${WRKSRC}/contrib/ttfbanner && ${MAKE_CMD} install @${MKDIR} ${TEXMFMAIN}/ttf2pk @for f in ${WRKSRC}/contrib/ttf2pk/data/*; do \ ${INSTALL_DATA} $$f ${TEXMFMAIN}/ttf2pk; \ done @${LN} -fs ${TEXMFMAIN}/ttf2pk ${TEXMFMAIN}/ttf2tfm .include Index: head/print/ghostscript7/Makefile =================================================================== --- head/print/ghostscript7/Makefile (revision 362827) +++ head/print/ghostscript7/Makefile (revision 362828) @@ -1,179 +1,179 @@ # Created by: Andreas Klemm # $FreeBSD$ PORTNAME= ghostscript PORTVERSION= 7.07 PORTREVISION= 29 CATEGORIES= print MASTER_SITES= SF/ghostscript/gnu-gs/${PORTVERSION}:gs_srcs \ ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/gnu/gs${PORTVERSION:S/.//}/:gs_srcs \ ${MASTER_SITE_PORTS_JP:S/$/:ports_jp,ports_jp_gs/} MASTER_SITE_SUBDIR= \ ghostscript/:gs_srcs \ ./:ports_jp PKGNAMESUFFIX= 7 DISTFILES= ${DISTNAME}${EXTRACT_SUFX}:gs_srcs DIST_SUBDIR= ${PORTNAME} EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX} -MAINTAINER= doceng@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Ghostscript 7.x PostScript interpreter LICENSE= GPLv2 LIB_DEPENDS= libjpeg.so:${PORTSDIR}/graphics/jpeg \ libpng15.so:${PORTSDIR}/graphics/png RUN_DEPENDS= ${LOCALBASE}/share/ghostscript/fonts/a010013l.pfb:${PORTSDIR}/print/gsfonts CONFLICTS_INSTALL= \ gambc-[0-9]* \ ghostscript[89]-[0-9]* \ ghostscript[89]-nox11-[0-9]* \ ghostscript9-agpl-[0-9]* \ ghostscript9-agpl-nox11-[0-9]* USES= gmake tar:bzip2 USE_LDCONFIG= yes WANT_GNOME= yes # normazile WRKSRC so things like cups-pstoraster may work WRKSRC= ${WRKDIR}/${PORTNAME} GNU_CONFIGURE= yes CONFIGURE_ENV= ${MAKE_ENV} CONFIGURE_ARGS= --disable-compile-inits \ --with-ijs MAKE_ENV= CFLAGS_STANDARD="${CFLAGS}" \ XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}" \ EXTRALIBS="${EXTRALIBS}" CPPFLAGS+= -fPIC -DUPD_SIGNAL=0 -I. -I${WRKSRC}/gimp-print \ -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include \ -I${LOCALBASE}/include/libpng15 LDFLAGS+= ${XLDFLAGS} XCFLAGS= ${PTHREAD_CFLAGS} XLDFLAGS= -L${LOCALBASE}/lib -L${WRKSRC}/gimp-print ${PTHREAD_LIBS} PLIST_SUB= GS_VERSION="${PORTVERSION}" OPTIONS_DEFINE= X11 DOCS A4SIZE OPTIONS_DEFAULT=X11 DOCS A4SIZE NO_OPTIONS_SORT=yes A4SIZE_DESC= Set A4 (not Letter) as the default paper size MAN1= ansi2knr.1 dvipdf.1 font2c.1 gs.1 gslp.1 gsnd.1 pdf2dsc.1 \ pdf2ps.1 pdfopt.1 pf2afm.1 pfbtopfa.1 printafm.1 ps2ascii.1 \ ps2epsi.1 ps2pdf.1 ps2pdfwr.1 ps2ps.1 wftopfa.1 MLINKS= gslp.1 gsbj.1 \ gslp.1 gsdj.1 \ gslp.1 gsdj500.1 \ gslp.1 gslj.1 \ ps2pdf.1 ps2pdf12.1 \ ps2pdf.1 ps2pdf13.1 \ ps2ps.1 eps2eps.1 NO_STAGE= yes post-extract-all: ${LN} -sf ${WRKDIR}/${DISTNAME} ${WRKDIR}/${PORTNAME} post-extract: post-extract-all .include "Makefile.drivers" .include .if ${PORT_OPTIONS:MX11} USE_GNOME= gtk12 .endif MASTERDIR?= ${.CURDIR} .include "${MASTERDIR}/files/Makefile.drivers_post" .for D in ${OPTIONS_DEFINE:MGS_*:S/^GS_//} \ ${OPTIONS_MULTI_X11:MGS_*:S/^GS_//} \ ${OPTIONS_GROUP_SVGALIB:MGS_*:S/^GS_//} .if ${PORT_OPTIONS:MGS_${D}} PLIST_SUB+= GS_${D}="" .else PLIST_SUB+= GS_${D}="@comment " .endif .endfor .if ${PORT_OPTIONS:MA4SIZE} XCFLAGS+= -DA4 .endif # contributed uniprint profiles CONTRIB_UPP= lqx70ch.upp lqx70cl.upp lqx70cm.upp \ stc740ih.upp stc740p.upp stc740pl.upp .if ${PORT_OPTIONS:MX11} MAKE_ENV+= GS_SHLIB_VER="${SHLIB_VER}" SHLIB_VER= 1 PLIST_SUB+= SHLIB="" X11="" SHLIB_VER="${SHLIB_VER}" ALL_TARGET= so INSTALL_TARGET= soinstall .if ${PORT_OPTIONS:MGS_pcl3} ALL_TARGET+= pcl3opts .endif .else ALL_TARGET= all PLIST_SUB+= SHLIB="@comment " X11="@comment " .endif post-patch: ${REINPLACE_CMD} -e 's|^DEVICE_DEVS|#DEVICE_DEVS|g' \ ${WRKSRC}/src/unix-gcc.mak ${REINPLACE_CMD} -e 's|\. de|\.|g' \ ${WRKSRC}/src/unixinst.mak ${REINPLACE_CMD} -e 's|%%DATADIR%%|${DATADIR}|g' \ ${WRKSRC}/lib/gs_res.ps pre-build-drivers.mak: @${ECHO_CMD} '# automatically generated' > ${WRKSRC}/src/drivers.mak .for N in ${DEVS_LIST} @${ECHO_CMD} 'DEVICE_${N}=' >> ${WRKSRC}/src/drivers.mak .endfor .for D in ${OPTIONS_DEFINE:MGS_*:S/^GS_//} \ ${OPTIONS_MULTI_X11:MGS_*:S/^GS_//} \ ${OPTIONS_GROUP_SVGALIB:MGS_*:S/^GS_//} .for N in ${DEVS_LIST} .if ${PORT_OPTIONS:MGS_${D}} .if !defined(OPTIONS_UNSET) || !${OPTIONS_UNSET:MGS_${D}} .for X in ${DEVICE_${N}:M${D}.dev} @${ECHO_CMD} 'DEVICE_${N}+= $$(DD)${D}.dev' >> ${WRKSRC}/src/drivers.mak .endfor .endif .endif .endfor .endfor pre-build-contrib_extra.mak: ${CAT} /dev/null ${EXTRADEVMKFILE} > ${WRKSRC}/src/contrib_extra.mak pre-build-all: ${MKDIR} ${WRKSRC}/obj ${WRKSRC}/bin pre-build: pre-build-all pre-build-drivers.mak pre-build-contrib_extra.mak pre-su-install: ${MKDIR} ${DATADIR} ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR} post-install-docs: ${MKDIR} ${DOCSDIR} post-install: ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}/${PORTVERSION} .if ${PORT_OPTIONS:MX11} ${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx ${LN} -sf gsc ${PREFIX}/bin/gs .else ${STRIP_CMD} ${PREFIX}/bin/gs .endif cd ${FILESDIR} \ && ${INSTALL_DATA} ${CONTRIB_UPP} ${DATADIR}/${PORTVERSION}/lib @${ECHO_MSG} @${CAT} ${PKGMESSAGE} @${ECHO_MSG} .if ${PORT_OPTIONS:MDOCS} post-install: post-install-docs .endif .include Index: head/print/ghostscript7-commfont/Makefile =================================================================== --- head/print/ghostscript7-commfont/Makefile (revision 362827) +++ head/print/ghostscript7-commfont/Makefile (revision 362828) @@ -1,44 +1,44 @@ # Created by: Tomokatsu SAITO # $FreeBSD$ PORTNAME= ghostscript PORTVERSION= 7.07 PORTREVISION= 12 CATEGORIES= print MASTER_SITES= # empty PKGNAMESUFFIX= 7-commfont DISTFILES= # empty -MAINTAINER= doceng@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Common files for Ghostscript 7.x CJK font support BUILD_DEPENDS= ${CMAPDIR}/ac15/cid2code.txt:${PORTSDIR}/print/adobe-cmaps RUN_DEPENDS= ${CMAPDIR}/ac15/cid2code.txt:${PORTSDIR}/print/adobe-cmaps NO_WRKSUBDIR= yes SUB_FILES= pkg-message \ Makefile template.cidfont template.ttcidfont template.font SUB_LIST= PORTVERSION="${PORTVERSION}" GS_RESDIR="${GS_RESDIR}" PLIST_SUB= GS_RESDIR="${GS_RESDIR}" PKGMESSAGE= ${WRKDIR}/pkg-message DEPENDS_ARGS+= -DA4 # set these forcibly USE_GHOSTSCRIPT_RUN=7 CONFLICTS= ghostscript8-[0-9]* \ ghostscript8-nox11-[0-9]* \ ghostscript9-[0-9]* \ ghostscript9-nox11-[0-9]* \ ghostscript9-agpl-[0-9]* \ ghostscript9-agpl-nox11-[0-9]* CMAPDIR?= ${LOCALBASE}/share/fonts/adobe-cmaps GS_RESDIR?= share/ghostscript/Resource post-extract: apply-slist NO_STAGE= yes post-install: @${CAT} ${PKGMESSAGE} .include Index: head/print/ghostscript7-jpnfont/Makefile =================================================================== --- head/print/ghostscript7-jpnfont/Makefile (revision 362827) +++ head/print/ghostscript7-jpnfont/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: Mita Yoshio # $FreeBSD$ PORTNAME= ghostscript PORTVERSION= 7.07 PORTREVISION= 11 CATEGORIES= print japanese MASTER_SITES= # empty PKGNAMESUFFIX= 7-jpnfont DISTFILES= # empty -MAINTAINER= doceng@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Japanese font support for Ghostscript 7.x RUN_DEPENDS= ${LOCALBASE}/share/fonts/std.ja_JP/Ryumin-Light.gs7:${PORTSDIR}/japanese/font-std \ ${LOCALBASE}/share/ghostscript/Resource/CIDFont/Ryumin-Light:${PORTSDIR}/print/ghostscript7-commfont # set these forcibly USE_GHOSTSCRIPT_RUN= 7 NO_BUILD= yes DEPENDS_ARGS+= -DA4 NO_STAGE= yes do-install: @${DO_NADA} .include Index: head/print/ghostscript7-korfont/Makefile =================================================================== --- head/print/ghostscript7-korfont/Makefile (revision 362827) +++ head/print/ghostscript7-korfont/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: Mita Yoshio # $FreeBSD$ PORTNAME= ghostscript PORTVERSION= 7.07 PORTREVISION= 7 CATEGORIES= print korean MASTER_SITES= # empty PKGNAMESUFFIX= 7-korfont DISTFILES= # empty -MAINTAINER= doceng@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Korean font support for Ghostscript 7.x RUN_DEPENDS= ${LOCALBASE}/share/fonts/CIDFont/Munhwa-Regular:${PORTSDIR}/korean/munhwafonts-cid \ ${LOCALBASE}/share/ghostscript/Resource/CIDFont/HYSMyeongJo-Medium:${PORTSDIR}/print/ghostscript7-commfont # set these forcibly USE_GHOSTSCRIPT_RUN= 7 NO_BUILD= yes DEPENDS_ARGS+= -DA4 NO_STAGE= yes do-install: @${DO_NADA} .include Index: head/print/gsview/Makefile =================================================================== --- head/print/gsview/Makefile (revision 362827) +++ head/print/gsview/Makefile (revision 362828) @@ -1,60 +1,60 @@ # Created by: bf # $FreeBSD$ PORTNAME= gsview PORTVERSION= 4.9 PORTREVISION= 4 CATEGORIES= print MASTER_SITES= LOCAL/bf -MAINTAINER= bf@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= GUI to view, search, print, and convert PostScript and PDF documents USE_GNOME= gtk12 USE_GHOSTSCRIPT= yes RUN_DEPENDS+= epstool:${PORTSDIR}/graphics/epstool \ pstotext:${PORTSDIR}/print/pstotext NO_CDROM= Can only be distributed for free MAKE_ENV+= PTHREAD_LIBS=${PTHREAD_LIBS} PTHREAD_CFLAGS=${PTHREAD_CFLAGS} MAKE_JOBS_UNSAFE= yes MAN1= gsview.1 PLIST_FILES= bin/gsview \ bin/gsview-help \ etc/gsview/printer.ini PLIST_DIRS= etc/gsview PORTDOCS= gsview.css cdorder.txt regorder.txt Readme.htm LICENCE \ gvxct.htm gvxde.htm gvxen.htm gvxes.htm gvxfr.htm gvxgr.htm \ gvxit.htm gvxnl.htm gvxru.htm gvxse.htm gvxsk.htm SUB_FILES= pkg-message NO_STAGE= yes post-patch: ${CP} ${WRKSRC}/srcunx/unx.mak ${WRKSRC}/Makefile ${REINPLACE_CMD} -e 's;malloc\.h;stdlib\.h;g' \ ${WRKSRC}/src/doc2html.c ${WRKSRC}/src/doc2ipf.c \ ${WRKSRC}/src/doc2xml.c ${REINPLACE_CMD} -e 's;mozilla;firefox3;g' \ ${WRKSRC}/srcunx/gvxhelp.txt do-install: ${INSTALL_PROGRAM} ${WRKSRC}/bin/gsview ${PREFIX}/bin ${INSTALL_SCRIPT} ${WRKSRC}/srcunx/gvxhelp.txt ${PREFIX}/bin/gsview-help ${INSTALL_MAN} ${WRKSRC}/srcunx/gsview.1 ${PREFIX}/man/man1 ${MKDIR} ${PREFIX}/etc/gsview/ ${INSTALL_DATA} ${WRKSRC}/src/printer.ini ${PREFIX}/etc/gsview/ .ifndef(NOPORTDOCS) ${MKDIR} ${DOCSDIR} (cd ${WRKSRC} && ${INSTALL_MAN} gsview.css cdorder.txt regorder.txt \ Readme.htm LICENCE ${DOCSDIR} ) ${INSTALL_MAN} ${WRKSRC}/bin/*.htm ${DOCSDIR} .endif post-install: @${CAT} ${PKGMESSAGE} .include Index: head/print/ifxetex/Makefile =================================================================== --- head/print/ifxetex/Makefile (revision 362827) +++ head/print/ifxetex/Makefile (revision 362828) @@ -1,46 +1,46 @@ # Created by: Martin Dieringer # $FreeBSD$ PORTNAME= ifxetex PORTVERSION= 20090124 PORTREVISION= 4 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_TEX_CTAN} MASTER_SITE_SUBDIR= macros/generic/ DISTNAME= ${PORTNAME} -MAINTAINER= martin.dieringer@gmx.de +MAINTAINER= ports@FreeBSD.org COMMENT= The file ifxetex.sty tests whether XeTeX is being used DEPRECATED= Very outdated and fully contained in texlive-texmf EXPIRATION_DATE=2014-08-01 WRKSRC= ${WRKDIR}/${PORTNAME} USES= zip USE_TEX= latex PLIST= ${WRKDIR}/pkg-plist TEXMFDIR= share/texmf-local MKTEXLSR= ${LOCALBASE}/bin/mktexlsr CLASSDIR= ${TEXMFDIR}/tex/latex/${PORTNAME} CLASS_FILES= ${PORTNAME}.sty NO_STAGE= yes do-build: cd ${WRKSRC} && latex ${PORTNAME}.ins pre-install: ${ECHO_CMD} "${CLASSDIR}/${CLASS_FILES}" > ${PLIST} ${ECHO_CMD} "@dirrm ${CLASSDIR}" >> ${PLIST} ${ECHO_CMD} "@exec ${MKTEXLSR}" >> ${PLIST} ${ECHO_CMD} "@unexec ${MKTEXLSR}" >> ${PLIST} do-install: @${MKDIR} ${PREFIX}/${CLASSDIR} ${INSTALL_DATA} ${CLASS_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${CLASSDIR} post-install: ${MKTEXLSR} .include Index: head/print/latex/Makefile =================================================================== --- head/print/latex/Makefile (revision 362827) +++ head/print/latex/Makefile (revision 362828) @@ -1,74 +1,74 @@ # Created by: jmz # $FreeBSD$ PORTNAME= latex2e PORTVERSION= 2003.12 PORTREVISION= 1 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_LOCAL} MASTER_SITE_SUBDIR= jmz DISTFILES= latex_mf-${PORTVERSION}.tar.gz latex_tfm-${PORTVERSION}.tar.gz \ latex_base-${PORTVERSION}.tar.gz latex_tools-${PORTVERSION}.tar.gz \ latex_graphics-${PORTVERSION}.tar.gz latex_psnfss-${PORTVERSION}.tar.gz -MAINTAINER= gabor@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= TeX macro package BUILD_DEPENDS= tex:${PORTSDIR}/print/tex RUN_DEPENDS= tex:${PORTSDIR}/print/tex DIST_SUBDIR= tex CONFLICTS= teTeX* NO_WRKSUBDIR= yes NO_STAGE= yes do-build: @${RM} ${WRKSRC}/tfm/dummy.tfm ${WRKSRC}/mf/cmex9.mf @(cd ${WRKSRC}/base; TEXINPUTS=${WRKSRC}/base: export TEXINPUTS; tex --ini unpack.ins) @(cd ${WRKSRC}/base; TEXINPUTS=${WRKSRC}/base: TEXFONTS=${WRKSRC}/tfm:; export TEXFONTS TEXINPUTS; \ tex --ini latex.ltx ${PREFIX}/share/texmf/tex/latex/graphics.cfg;\ ${ECHO_CMD} '\ExecuteOptions{dvips}' >${PREFIX}/share/texmf/tex/latex/color.cfg) @(cd ${WRKSRC}/psnfss; for f in *.sty *.tex; do \ if [ -f $$f ]; then ${INSTALL_DATA} $$f ${PREFIX}/share/texmf/tex/latex; fi; done;\ tar cf - tex fonts | tar -C ${PREFIX}/share/texmf/ -xf -) @(cd ${PREFIX}/bin; ${RM} -f latex; ${LN} -s tex latex) @(${MKDIR} ${PREFIX}/share/texmf/documentation) @(cd ${WRKSRC}/base; for f in *.dtx ltx3info.tex source2e.tex *.fdd ltnews*.tex *guide.tex; do \ if [ -f $$f ]; then ${INSTALL_DATA} $$f ${PREFIX}/share/texmf/documentation; fi; done) @(cd ${WRKSRC}/tools; for f in *.dtx; do \ if [ -f $$f ]; then ${INSTALL_DATA} $$f ${PREFIX}/share/texmf/documentation; fi; done) @(cd ${WRKSRC}/graphics; for f in *.dtx; do \ if [ -f $$f ]; then ${INSTALL_DATA} $$f ${PREFIX}/share/texmf/documentation; fi; done) @(cd ${WRKSRC}/psnfss; for f in *.dtx *pfd; do \ if [ -f $$f ]; then ${INSTALL_DATA} $$f ${PREFIX}/share/texmf/documentation; fi; done) @(cd ${PREFIX}/bin; ${RM} -f latex; ${LN} -s tex latex) .include Index: head/print/latex-aa/Makefile =================================================================== --- head/print/latex-aa/Makefile (revision 362827) +++ head/print/latex-aa/Makefile (revision 362828) @@ -1,48 +1,48 @@ # Created by: Koji Yokota (yokota@res.otaru-uc.ac.jp) # $FreeBSD$ PORTNAME= latex-aa PORTVERSION= 6.1 PORTREVISION= 3 CATEGORIES= print astro science MASTER_SITES= ftp://ftp.edpsciences.org/pub/aa/ DISTNAME= aa-package DIST_SUBDIR= latex -MAINTAINER= yokota@res.otaru-uc.ac.jp +MAINTAINER= ports@FreeBSD.org COMMENT= LaTeX class for submission to "Astronomy and Astrophysics" BROKEN= Does not install DEPRECATED= Broken for more than 6 months EXPIRATION_DATE= 2014-08-22 NO_BUILD= yes NO_WRKSUBDIR= yes USE_GHOSTSCRIPT_BUILD= yes USE_TEX= latex dvipsk texhash TEXHASHDIRS= ${TEXMFDIR} AADIR= tex/latex/aa AABIBDIR= bibtex/bst/aa AADOCSDIR= doc/latex/aa DOCFILES= aa.dem aa.dvi aa.pdf aadoc.pdf readme.html readme.txt NO_STAGE= yes pre-install: ( cd ${WRKSRC}/${DISTNAME} && \ latex aa.dem && latex aa.dem && dvips aa.dvi && ps2pdf aa.ps ) do-install: ( cd ${WRKSRC}/${DISTNAME} && \ ${COPYTREE_SHARE} "aa.cls" ${PREFIX}/${TEXMFDIR}/${AADIR} ) ( cd ${WRKSRC}/${DISTNAME}/bibtex/ && \ ${COPYTREE_SHARE} "aa.bst" ${PREFIX}/${TEXMFDIR}/${AABIBDIR} ) .if !defined(NOPORTDOCS) ( cd ${WRKSRC}/${DISTNAME} && \ ${COPYTREE_SHARE} "${DOCFILES}" ${PREFIX}/${TEXMFDIR}/${AADOCSDIR} ) .endif post-install: ${MKTEXLSR} ${PREFIX}/${TEXMFDIR} .include Index: head/print/latex-acm/Makefile =================================================================== --- head/print/latex-acm/Makefile (revision 362827) +++ head/print/latex-acm/Makefile (revision 362828) @@ -1,57 +1,57 @@ # Created by: Eygene Ryabinkin # $FreeBSD$ PORTNAME= latex-acm PORTVERSION= 1.1 CATEGORIES= print MASTER_SITES= http://www.acm.org/publications/latex_style/ \ http://dist.codelabs.ru/fbsd/latex-acm/ DISTFILES= acm-small-v1-1.zip \ acm-large-v1-1.zip -MAINTAINER= rea@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= LaTeX styles for ACM journals USES= zip USE_TEX= latex NO_BUILD= yes TEXMFLOCAL= share/texmf-local TEXMFLOCAL_LSR= ${LOCALBASE}/${TEXMFLOCAL}/ls-R MKTEXLSR= ${LOCALBASE}/bin/mktexlsr LATEXDIR= ${TEXMFLOCAL}/tex/latex/${PORTNAME:S/^latex-//} BIBTEXDIR= ${TEXMFLOCAL}/bibtex/bst/${PORTNAME:S/^latex-//} WRKSRC= ${WRKDIR} CLASS_FILES= acmlarge.cls acmsmall.cls STYLE_FILES= algorithm2e.sty BIB_FILES= acmlarge.bst acmsmall.bst PORTEXAMPLES= acmlarge-sample.tex acmlarge-sample.pdf acmlarge-sample.bbl \ acmlarge-mouse.eps acmlarge-mouse.pdf acmlarge-sam.bib \ acmsmall-sample.tex acmsmall-sample.pdf acmsmall-sample.bbl \ acmsmall-mouse.eps acmsmall-mouse.pdf acmsmall-sam.bib PORTDOCS= acmlarge-guide.pdf acmsmall-guide.pdf PLIST_FILES= ${CLASS_FILES:S@^@${LATEXDIR}/@} \ ${STYLE_FILES:S@^@${LATEXDIR}/@} \ ${BIB_FILES:S@^@${BIBTEXDIR}/@} PLIST_DIRS= ${LATEXDIR} ${BIBTEXDIR} PLIST_SUB= MKTEXLSR=${MKTEXLSR} \ TEXMFLOCAL=${TEXMFLOCAL} NO_STAGE= yes do-install: ${MKDIR} ${PREFIX}/${LATEXDIR} ${INSTALL_DATA} ${CLASS_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${LATEXDIR} ${INSTALL_DATA} ${STYLE_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${LATEXDIR} ${MKDIR} ${PREFIX}/${BIBTEXDIR} ${INSTALL_DATA} ${BIB_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${BIBTEXDIR} .if !defined(NOPORTDOCS) ${MKDIR} ${DOCSDIR} ${INSTALL_DATA} ${PORTDOCS:S@^@${WRKSRC}/@} ${DOCSDIR} .endif .if !defined(NOPORTEXAMPLES) ${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${PORTEXAMPLES:S@^@${WRKSRC}/@} ${EXAMPLESDIR} .endif .include Index: head/print/latex-auto-greek/Makefile =================================================================== --- head/print/latex-auto-greek/Makefile (revision 362827) +++ head/print/latex-auto-greek/Makefile (revision 362828) @@ -1,78 +1,78 @@ # Created by: EelVex # $FreeBSD$ PORTNAME= latex-auto-greek PORTVERSION= 1.0b PORTREVISION= 4 CATEGORIES= print MASTER_SITES= http://waterdeep.physics.upatras.gr/~eelvex/files/ -MAINTAINER= mplekos@physics.upatras.gr +MAINTAINER= ports@FreeBSD.org COMMENT= LaTeX package for switching between greek/latintext automatically USE_TEX= latex NO_BUILD= YES PLIST_SUB= TEXMFDIST=${TEXMFDIST} UPDMAP=${UPDMAP} \ CLASSDIR=${CLASSDIR} FMTUTIL=${FMTUTIL} \ MKTEXLSR=${MKTEXLSR} AFFONTDIR=${AFFONTDIR} \ PFFONTDIR=${PFFONTDIR} TFFONTDIR=${TFFONTDIR} \ ENCDIR=${ENCDIR} PSMAPDIR=${PSMAPDIR} \ UPDMAP_FILE=${UPDMAP_FILE} HYPHDIR=${HYPHDIR} TEXMFDIST= share/texmf-dist TEXMFCONFIG= share/texmf-config MKTEXLSR= ${LOCALBASE}/bin/mktexlsr UPDMAP= ${LOCALBASE}/bin/updmap-sys FMTUTIL= ${LOCALBASE}/bin/fmtutil-sys CLASSDIR= ${TEXMFDIST}/tex/latex/${PORTNAME:S/^latex-//} FONTDIR= ${TEXMFDIST}/fonts TRFONTDIR= ${FONTDIR}/truetype/public/${PORTNAME:S/^latex-//} PFFONTDIR= ${FONTDIR}/type1/public/${PORTNAME:S/^latex-//} AFFONTDIR= ${FONTDIR}/afm/public/${PORTNAME:S/^latex-//} TFFONTDIR= ${FONTDIR}/tfm/public/${PORTNAME:S/^latex-//} PSMAPDIR= ${FONTDIR}/map/dvips/${PORTNAME:S/^latex-//} ENCDIR= ${FONTDIR}/enc/dvips/${PORTNAME:S/^latex-//} HYPHDIR= ${TEXMFDIST}/tex/generic/hyphen/ WRKSRC= ${WRKDIR}/ DOC_FILES= README ag-test.tex ag-test.dvi UPDMAP_FILE= ${TEXMFCONFIG}/web2c/updmap.cfg CLASS_FILES= auto-greek.sty updmap.inc ot1grcouri.fd ot1grarial.fd ot1grtimes.fd grushyph.tex PFFONT_FILES= *.pfb AFFONT_FILES= *.afm TFFONT_FILES= *.tfm PSMAP_FILES= greek.map ENC_FILES= greek.enc HYPH_FILES= grushyph.tex MAP_INC= updmap.inc NO_STAGE= yes do-install: ${MKDIR} ${PREFIX}/${CLASSDIR} ${MKDIR} ${PREFIX}/${PFFONTDIR} ${MKDIR} ${PREFIX}/${AFFONTDIR} ${MKDIR} ${PREFIX}/${TFFONTDIR} ${MKDIR} ${PREFIX}/${PSMAPDIR} ${MKDIR} ${PREFIX}/${ENCDIR} ${INSTALL_DATA} ${CLASS_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${CLASSDIR} ${INSTALL_DATA} ${PFFONT_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${PFFONTDIR} ${INSTALL_DATA} ${AFFONT_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${AFFONTDIR} ${INSTALL_DATA} ${TFFONT_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${TFFONTDIR} ${INSTALL_DATA} ${PSMAP_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${PSMAPDIR} ${INSTALL_DATA} ${ENC_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${ENCDIR} ${CAT} ${MAP_INC:S@^@${WRKSRC}/@} >> ${PREFIX}/${UPDMAP_FILE} ${CP} ${PREFIX}/${HYPHDIR}/hyphen.tex ${PREFIX}/${HYPHDIR}/hyphen.tex.old ${INSTALL_DATA} ${HYPH_FILES:S@^@${WRKSRC}/@} ${PREFIX}/${HYPHDIR}/hyphen.tex .if !defined(NOPORTDOCS) ${MKDIR} ${DOCSDIR} ${INSTALL_DATA} ${DOC_FILES:S@^@${WRKSRC}/@} ${DOCSDIR} .endif post-install: ${MKTEXLSR} ${UPDMAP} ${FMTUTIL} --byfmt latex ${FMTUTIL} --byfmt pdflatex .include Index: head/print/latex-timing/Makefile =================================================================== --- head/print/latex-timing/Makefile (revision 362827) +++ head/print/latex-timing/Makefile (revision 362828) @@ -1,58 +1,58 @@ # Created by: hrs@FreeBSD.org # $FreeBSD$ PORTNAME= latex-timing PORTVERSION= 1.0.19940515 PORTREVISION= 6 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_TEX_CTAN} MASTER_SITE_SUBDIR= macros/latex/contrib/timing DISTFILES= ${DOC_FILES} ${CLASS_FILES} ${MF_FILES} ${PK_FILES} ${TFM_FILES} DIST_SUBDIR= ${PORTNAME} EXTRACT_ONLY= #empty -MAINTAINER= hrs@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= LaTeX package for drawing timing diagrams USE_TEX= latex NO_BUILD= YES PLIST_SUB= TEXMFDIR=${TEXMFDIR} MKTEXLSR=${MKTEXLSR} \ CLASSDIR=${CLASSDIR} \ MFDIR=${MFDIR} TFMDIR=${TFMDIR} PKDIR=${PKDIR} TEXMFDIR= share/texmf MKTEXLSR= ${LOCALBASE}/bin/mktexlsr DOC_FILES= read.me timing.pdf timing.tex prozt1.tex tim0594.upl CLASSDIR= ${TEXMFDIR}/tex/latex/${PORTNAME:S/^latex-//} CLASS_FILES= timing.sty MFDIR= ${TEXMFDIR}/fonts/source/public/${PORTNAME:S/^latex-//} MF_FILES= timing.mf timing1.mf timing1s.mf timing2.mf timing2s.mf PKDIR= ${TEXMFDIR}/fonts/pk/${PORTNAME:S/^latex-//} PK_FILES= timing1.pk timing1s.pk timing2.pk timing2s.pk TFMDIR= ${TEXMFDIR}/fonts/tfm/${PORTNAME:S/^latex-//} TFM_FILES= timing1.tfm timing1s.tfm timing2.tfm timing2s.tfm NO_STAGE= yes do-install: ${MKDIR} ${PREFIX}/${CLASSDIR} ${INSTALL_DATA} ${CLASS_FILES:S@^@${DISTDIR}/${DIST_SUBDIR}/@} ${PREFIX}/${CLASSDIR} ${MKDIR} ${PREFIX}/${MFDIR} ${INSTALL_DATA} ${MF_FILES:S@^@${DISTDIR}/${DIST_SUBDIR}/@} ${PREFIX}/${MFDIR} ${MKDIR} ${PREFIX}/${TFMDIR} ${INSTALL_DATA} ${TFM_FILES:S@^@${DISTDIR}/${DIST_SUBDIR}/@} ${PREFIX}/${TFMDIR} ${MKDIR} ${PREFIX}/${PKDIR} ${INSTALL_DATA} ${PK_FILES:S@^@${DISTDIR}/${DIST_SUBDIR}/@} ${PREFIX}/${PKDIR} .if !defined(NOPORTDOCS) ${MKDIR} ${DOCSDIR} ${INSTALL_DATA} ${DOC_FILES:S@^@${DISTDIR}/${DIST_SUBDIR}/@} ${DOCSDIR} .endif post-install: ${MKTEXLSR} .include Index: head/print/latex2rtf/Makefile =================================================================== --- head/print/latex2rtf/Makefile (revision 362827) +++ head/print/latex2rtf/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: Joerg Wunsch # $FreeBSD$ PORTNAME= latex2rtf PORTVERSION= 2.0.0 CATEGORIES= print MASTER_SITES= SF/${PORTNAME}/${PORTNAME}-unix/${PORTVERSION} \ ${MASTER_SITE_TEX_CTAN} -MAINTAINER= joerg@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Translator from LaTeX to RTF MAN1= latex2rtf.1 latex2png.1 INFO= latex2rtf USES= perl5 USE_PERL5= build INSTALL_TARGET= install install-info NO_STAGE= yes pre-patch: @${CP} ${WRKSRC}/doc/latex2rtf.info ${WRKSRC}/doc/latex2rtf.info.bak @${TR} -d '\r\b\0' < ${WRKSRC}/doc/latex2rtf.info.bak > ${WRKSRC}/doc/latex2rtf.info .include Index: head/print/mp-letter/Makefile =================================================================== --- head/print/mp-letter/Makefile (revision 362827) +++ head/print/mp-letter/Makefile (revision 362828) @@ -1,36 +1,36 @@ # Created by: David O'Brien # $FreeBSD$ PORTNAME= mp-${PAPERSIZE} PORTVERSION= 3.0.1 CATEGORIES= print MASTER_SITES= ftp://relay.NUXI.org/pub/misc/ \ ftp://ftp.netsw.org/system/tools/print/ \ # ftp://ftp.fu-berlin.de/unix/tools/mp/ # ftp://ftp.inria.fr/system/user/ DISTNAME= mp-3.0.1 -MAINTAINER= obrien@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= A PostScript printing util for ASCII files, email, USENET news articles, etc WRKSRC= ${WRKDIR}/mp MAN1= mp.1 MLINKS= mp.1 digestp.1 - filep.1 - filofaxp.1 \ - franklinp.1 - mailp.1 - newsp.1 \ - timemanp.1 - timesysp.1 PAPERSIZE?= letter .if ${PAPERSIZE:tl} == a4 INSTALL_TARGET= install-a4 .endif NO_STAGE= yes pre-patch: @${CP} ${WRKSRC}/Makefile.dist ${WRKSRC}/Makefile @${REINPLACE_CMD} -e 's// using namespace std;/' \ -e 's/enum action_type/action_type/g' \ -e 's/enum text_type/text_type/g' \ ${WRKSRC}/header.cc ${WRKSRC}/input.cc ${WRKSRC}/main.cc \ ${WRKSRC}/print.cc ${WRKSRC}/print.hh .include Index: head/print/pdfcolorsplit/Makefile =================================================================== --- head/print/pdfcolorsplit/Makefile (revision 362827) +++ head/print/pdfcolorsplit/Makefile (revision 362828) @@ -1,35 +1,35 @@ # Created by: Aldis Berjoza # $FreeBSD$ PORTNAME= pdfcolorsplit PORTVERSION= 2011.08.26 PORTREVISION= 3 CATEGORIES= print python MASTER_SITES= http://files.bsdroot.lv/my/FreeBSD/distfiles/ PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} -MAINTAINER= graudeejs@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= Split your pdf into 2 pdf, color and bw, for printing LICENSE= GPLv2 RUN_DEPENDS= pdftk:${PORTSDIR}/print/pdftk \ ${LOCALBASE}/libexec/xpdf/pdftoppm:${PORTSDIR}/graphics/xpdf USE_GHOSTSCRIPT_RUN= yes USE_PYTHON= yes USE_XZ= yes PLIST_FILES= bin/${PORTNAME} NO_BUILD= yes NO_WRKSUBDIR= yes NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e '/os\.system/s|pdftoppm|${LOCALBASE}/libexec/xpdf/pdftoppm|g' ${WRKSRC}/${PORTNAME} do-install: ${INSTALL_SCRIPT} ${WRKDIR}/${PORTNAME} ${PREFIX}/bin/ .include Index: head/print/phppdflib/Makefile =================================================================== --- head/print/phppdflib/Makefile (revision 362827) +++ head/print/phppdflib/Makefile (revision 362828) @@ -1,31 +1,31 @@ # Created by: HSIN-HSIUNG CHANG # $FreeBSD$ PORTNAME= phppdflib PORTVERSION= 2.8 CATEGORIES= print MASTER_SITES= http://www.potentialtech.com/ EXTRACT_SUFX= .tbz -MAINTAINER= sexbear@tmu.edu.tw +MAINTAINER= ports@FreeBSD.org COMMENT= Easy to use API for creating PDF files dynamically USE_PHP= yes WANT_PHP_MOD= yes IGNORE_WITH_PHP=5 WRKSRC= ${WRKDIR}/phppdflib USE_BZIP2= yes NO_BUILD= yes MYADMDIR?= www/data/phppdflib PLIST_SUB+= MYADMDIR=${MYADMDIR} NO_STAGE= yes do-install: ${MKDIR} ${PREFIX}/${MYADMDIR} ${CP} -R ${WRKSRC}/* ${PREFIX}/${MYADMDIR} .include Index: head/print/ruby-panda/Makefile =================================================================== --- head/print/ruby-panda/Makefile (revision 362827) +++ head/print/ruby-panda/Makefile (revision 362828) @@ -1,52 +1,52 @@ # Created by: Akinori MUSHA aka knu # $FreeBSD$ PORTNAME= panda PORTVERSION= 0.0.7 PORTREVISION= 5 CATEGORIES= print ruby MASTER_SITES= http://www2s.biglobe.ne.jp/~Nori/ruby/dist/ PKGNAMEPREFIX= ${RUBY_PKGNAMEPREFIX} DISTNAME= ruby-${PORTNAME}-${PORTVERSION} DIST_SUBDIR= ruby -MAINTAINER= ruby@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Ruby extension library to access Panda BROKEN= not staged LIB_DEPENDS= libpanda.so:${PORTSDIR}/print/panda \ libjpeg.so:${PORTSDIR}/graphics/jpeg \ libpng15.so:${PORTSDIR}/graphics/png \ libtiff.so:${PORTSDIR}/graphics/tiff USE_RUBY= yes USE_RUBY_EXTCONF= yes WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION} INSTALL_TARGET= site-install DOCS_EN= README \ doc/ref_en.html doc/ref_en.rd DOCS_JA= ChangeLog.ja README.ja TODO.ja \ doc/ref_ja.html doc/ref_ja.rd EXAMPLES_EN= circles.rb main.rb morecircles.rb template.rb NO_STAGE= yes post-install: .if !defined(NOPORTDOCS) ${MKDIR} ${RUBY_MODEXAMPLESDIR} .for f in ${EXAMPLES_EN} ${INSTALL_DATA} ${WRKSRC}/examples/${f} ${RUBY_MODEXAMPLESDIR}/ .endfor cd ${RUBY_EXAMPLESDIR}/${PORTNAME}; ${LN} -sf ../../panda/*.jpg ../../panda/*.png ../../panda/*.tif . ${MKDIR} ${RUBY_MODDOCDIR}/ja .for f in ${DOCS_EN} ${INSTALL_DATA} ${WRKSRC}/${f} ${RUBY_MODDOCDIR}/ .endfor .for f in ${DOCS_JA} ${INSTALL_DATA} ${WRKSRC}/${f} ${RUBY_MODDOCDIR}/ja/ .endfor .endif .include Index: head/print/scribus-devel/Makefile =================================================================== --- head/print/scribus-devel/Makefile (revision 362827) +++ head/print/scribus-devel/Makefile (revision 362828) @@ -1,74 +1,74 @@ # Created by: lbartoletti # $FreeBSD$ PORTNAME= scribus PORTVERSION= 1.5.0 PORTREVISION= 9 CATEGORIES= print editors MASTER_SITES= http://download.tuxfamily.org/bartcoding/FreeBSD/ \ ${MASTER_SITE_LOCAL} DISTNAME= ${PORTNAME}-${PORTVERSION}-${SVN_REV} PKGNAMESUFFIX= -devel -MAINTAINER= coder@tuxfamily.org +MAINTAINER= ports@FreeBSD.org COMMENT= Comprehensive desktop publishing program LIB_DEPENDS= libjpeg.so:${PORTSDIR}/graphics/jpeg \ liblcms.so:${PORTSDIR}/graphics/lcms \ libpng15.so:${PORTSDIR}/graphics/png \ libtiff.so:${PORTSDIR}/graphics/tiff \ libcups.so:${PORTSDIR}/print/cups-base \ libfreetype.so:${PORTSDIR}/print/freetype2 \ libfontconfig.so:${PORTSDIR}/x11-fonts/fontconfig \ libpodofo.so:${PORTSDIR}/graphics/podofo \ libboost_thread.so:${PORTSDIR}/devel/boost-libs \ libaspell.so:${PORTSDIR}/textproc/aspell \ libcairo.so:${PORTSDIR}/graphics/cairo \ libexecinfo.so:${PORTSDIR}/devel/libexecinfo \ libpoppler.so:${PORTSDIR}/graphics/poppler \ libosg.so:${PORTSDIR}/graphics/osg RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}tkinter>0:${PORTSDIR}/x11-toolkits/py-tkinter \ ${PYTHON_SITELIBDIR}/PIL/_imaging.so:${PORTSDIR}/graphics/py-imaging \ update-mime-database:${PORTSDIR}/misc/shared-mime-info CONFLICTS= scribus-1.[0-4]* USE_BZIP2= yes USE_QT4= gui linguist_build moc_build qmake_build rcc_build uic_build xml network USE_GNOME= desktopfileutils libartlgpl2 libxml2 USE_GHOSTSCRIPT_RUN= yes USE_PYTHON= yes USES= cmake pkgconfig USE_LDCONFIG= yes MAN1= scribus.1 MANLANG= "" de pl MANCOMPRESSED= no FETCH_DEPENDS+= svn:${PORTSDIR}/devel/subversion SVN_REV= 17820 # svn tip at epoch 2009120801 SVNROOT_URI= svn://scribus.net/trunk/Scribus NO_STAGE= yes .include post-install: ${LN} ${DATADIR}/icons/scribus.png ${PREFIX}/share/pixmaps/ -update-desktop-database -update-mime-database ${PREFIX}/share/mime # # To roll snapshot: as bart (or other maintainer) : make BOOTSTRAP=defined fetch # .if defined(BOOTSTRAP) do-fetch: ${MKDIR} ${WRKDIR} svn export -r ${SVN_REV} ${SVNROOT_URI} ${WRKSRC} cd ${WRKDIR}; tar cvfy ${DISTDIR}/${DISTNAME}.tar.bz2 ${DISTNAME} .if ${USER} == bart ${CHMOD} ugo+r ${DISTDIR}/${DISTNAME}.tar.bz2 scp -p ${DISTDIR}/${DISTNAME}.tar.bz2 \ freefall.freebsd.org:public_distfiles/ .endif .endif # defined(BOOTSTRAP) .include Index: head/print/tex-omegaware-old/Makefile =================================================================== --- head/print/tex-omegaware-old/Makefile (revision 362827) +++ head/print/tex-omegaware-old/Makefile (revision 362828) @@ -1,40 +1,40 @@ # Created by: hrs@FreeBSD.org # $FreeBSD$ PORTNAME= tex-omegaware-old PORTVERSION= 2.0.2 PORTREVISION= 5 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_LOCAL} MASTER_SITE_SUBDIR= hrs/teTeX DISTFILES= ${TETEX_SRC} ${TETEX_TEXMF} EXTRACT_ONLY= ${TETEX_SRC} -MAINTAINER= hrs@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Old version of ovf2ovp, ovp2ovf, ofm2opl, and opl2ofm USE_TEX= base texmf DIST_SUBDIR= teTeX WRKSRC= ${WRKDIR}/tetex-src-${PORTVERSION}/texk/web2c CONFIGURE_WRKSRC= ${WRKDIR}/tetex-src-${PORTVERSION} USES= perl5 gmake USE_PERL5= build TETEX_SRC= tetex-src-${PORTVERSION}.tar.gz TETEX_TEXMF= tetex-texmf-${PORTVERSION}.tar.gz TEXMF_TREE= ${PREFIX}/share/texmf MAKE_ENV= LN="${LN}" \ INSTALL_PROGRAM="${INSTALL_PROGRAM}" GNU_CONFIGURE= YES CONFIGURE_ARGS= --disable-multiplatform \ --without-texinfo --without-dialog \ --without-xdvik --without-dvipdfm \ --with-system-ncurses --with-system-zlib CONFIGURE_ENV= INSTALL_PROGRAM="${BSD_INSTALL_SCRIPT}" NO_STAGE= yes pre-build: ${CP} ${FILESDIR}/Makefile.${PORTNAME} ${WRKSRC}/Makefile .include Index: head/print/texpower/Makefile =================================================================== --- head/print/texpower/Makefile (revision 362827) +++ head/print/texpower/Makefile (revision 362828) @@ -1,50 +1,50 @@ # Created by: Ying-Chieh Liao # $FreeBSD$ PORTNAME= texpower PORTVERSION= 0.2 PORTREVISION= 6 CATEGORIES= print MASTER_SITES= SF PKGNAMEPREFIX= latex- DISTNAME= ${PORTNAME}-0-2 -MAINTAINER= hrs@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Creating dynamic online presentations with LaTeX USE_TEX= tetex latex PLIST_SUB= TEXMFLOCAL=${TEXMFLOCAL} \ MKTEXLSR=${MKTEXLSR} TEXMFLOCAL= share/texmf-local MKTEXLSR= ${LOCALBASE}/bin/mktexlsr DOCFILES= 00readme.txt 01install.txt \ manual.pdf powersem.pdf texpower.pdf OPTIONS_DEFINE= DOCS NO_STAGE= yes .include do-build: @(cd ${BUILD_WRKSRC} && \ ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) @(cd ${BUILD_WRKSRC}/tpslifonts && \ ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) do-install: ${MKDIR} ${PREFIX}/${TEXMFLOCAL}/tex/latex/${PORTNAME} cd ${WRKSRC} && ${INSTALL_DATA} *.sty *.cls *.cfg \ ${PREFIX}/${TEXMFLOCAL}/tex/latex/${PORTNAME} ${MKDIR} ${PREFIX}/${TEXMFLOCAL}/tex/latex/${PORTNAME}/tpslifonts cd ${WRKSRC}/tpslifonts && ${INSTALL_DATA} *.sty \ ${PREFIX}/${TEXMFLOCAL}/tex/latex/${PORTNAME}/tpslifonts .if ${PORT_OPTIONS:MDOCS} ${MKDIR} ${DOCSDIR} cd ${WRKSRC} && ${INSTALL_DATA} ${DOCFILES} ${DOCSDIR} .endif post-install: ${MKTEXLSR} .include Index: head/print/utopia/Makefile =================================================================== --- head/print/utopia/Makefile (revision 362827) +++ head/print/utopia/Makefile (revision 362828) @@ -1,17 +1,17 @@ # Created by: James Bailie # $FreeBSD$ PORTNAME= utopia PORTVERSION= 1.1 CATEGORIES= print MASTER_SITES= http://www.mammothcheese.ca/ -MAINTAINER= jimmy@mammothcheese.ca +MAINTAINER= ports@FreeBSD.org COMMENT= Adobe Utopia typeface for Groff MAN7= utopia_font.7 MANCOMPRESSED= yes NO_STAGE= yes .include Index: head/russian/libcyrillic/Makefile =================================================================== --- head/russian/libcyrillic/Makefile (revision 362827) +++ head/russian/libcyrillic/Makefile (revision 362828) @@ -1,23 +1,23 @@ # Created by: Pavel Novikov # $FreeBSD$ PORTNAME= libcyrillic PORTVERSION= 1.9 CATEGORIES= russian converters textproc MASTER_SITES= http://ext.by/libcyrillic/ PKGNAMEPREFIX= DISTNAME= ${PORTNAME:S/^lib//}-${PORTVERSION} -MAINTAINER= pavel@ext.by +MAINTAINER= ports@FreeBSD.org COMMENT= Text manipulation and autodetection for 6 major Cyrillic charsets MAKE_ENV= WRKSRC="${WRKSRC}" MAKEFILE= ${FILESDIR}/Makefile.bsd USE_LDCONFIG= yes .if !defined(WITHOUT_OPTIMIZE) CFLAGS+= -O2 .endif NO_STAGE= yes .include Index: head/russian/rux/Makefile =================================================================== --- head/russian/rux/Makefile (revision 362827) +++ head/russian/rux/Makefile (revision 362828) @@ -1,20 +1,20 @@ # Created by: Vyacheslav Anikin # $FreeBSD$ PORTNAME= rux PORTVERSION= 0.79 PORTREVISION= 1 CATEGORIES= russian MASTER_SITES= SF/${PORTNAME}/${PORTNAME}/${PORTNAME}-${PORTVERSION} -MAINTAINER= anikinsl@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= The best Cyrillic text viewer and code page converter MAN1= rux.1 MANLANG= "" ru.KOI8-R MANCOMPRESSED= maybe PLIST_FILES= bin/rux NO_STAGE= yes .include Index: head/russian/tac+ia/Makefile =================================================================== --- head/russian/tac+ia/Makefile (revision 362827) +++ head/russian/tac+ia/Makefile (revision 362828) @@ -1,61 +1,61 @@ # Created by: Anton Voronin # $FreeBSD$ PORTNAME= tac+ia PORTVERSION= 0.96p9.3 CATEGORIES= russian net MASTER_SITES= ftp://ftp.vsu.ru/pub/hardware/cisco/tacacs/ DISTNAME= tac+ia-0.96pre9.3 -MAINTAINER= anton@chelcom.ru +MAINTAINER= ports@FreeBSD.org COMMENT= The Cisco remote aaa server (inet-admins edition) WRKSRC= ${WRKDIR}/tac+ia-0.96pre9.3 MANCOMPRESSED= no MAN1= macct.1 parrot.1 MAN8= tac_plus.8 HAS_CONFIGURE= yes # Default prefix for config files CONFIGURE_ARGS+= --enable-confpath=${PREFIX}/etc/tac_plus # Default prefix for pid files CONFIGURE_ARGS+= --enable-runpath=/var/run # Default prefix for log files CONFIGURE_ARGS+= --enable-logpath=/var/log/tac_plus # CONFIGURE_ARGS+= --enable-ttysfile=${PREFIX}/etc/tac_plus/ttys # This file tac+ will use for accounting records. # Can be redefined in config file ('accounting file' directive) CONFIGURE_ARGS+= --enable-acctfile=/var/log/tac_plus/tac_plus.acct # If you want to block access for users, which not exist in base CONFIGURE_ARGS+= --enable-db-strict # CONFIGURE_ARGS+= --enable-aliasesfile=${PREFIX}/etc/tac_plus/aliases # register NAS users on SIGUSR1 CONFIGURE_ARGS+= --enable-regnas # Support for ACL CONFIGURE_ARGS+= --enable-acl # CONFIGURE_ARGS+= --disable-deny CONFIGURE_ARGS+= --disable-cron CFLAGS+= -Wno-return-type NO_STAGE= yes post-build: @mv ${WRKSRC}/tac_plus/tac_plus.1 ${WRKSRC}/tac_plus/tac_plus.8 post-install: @if [ ! -f ${PREFIX}/etc/rc.d/tac_plus.sh ]; then \ ${ECHO} "Installing ${PREFIX}/etc/rc.d/tac_plus.sh startup file."; \ ${INSTALL_SCRIPT} -m 751 ${FILESDIR}/tac_plus.sh ${PREFIX}/etc/rc.d/tac_plus.sh; \ fi ${INSTALL_SCRIPT} -m 644 ${WRKSRC}/lib/libutil/ttys ${PREFIX}/etc/tac_plus/ttys.example ${INSTALL_SCRIPT} -m 644 ${WRKSRC}/tac_plus/aliases ${PREFIX}/etc/tac_plus/aliases.example ${INSTALL_SCRIPT} -m 644 ${WRKSRC}/tac_plus/tac_plus.conf ${PREFIX}/etc/tac_plus/tac_plus.conf.example -@mkdir -p ${PREFIX}/share/doc/tac_plus ${INSTALL_SCRIPT} -m 644 ${WRKSRC}/tac_plus/users_guide ${PREFIX}/share/doc/tac_plus/users_guide ${INSTALL_SCRIPT} -m 644 ${WRKSRC}/README ${PREFIX}/share/doc/tac_plus/README .include Index: head/russian/xcode/Makefile =================================================================== --- head/russian/xcode/Makefile (revision 362827) +++ head/russian/xcode/Makefile (revision 362828) @@ -1,25 +1,25 @@ # Created by: Michael Vasilenko # $FreeBSD$ PORTNAME= xcode PORTVERSION= 4.1 CATEGORIES= russian converters MASTER_SITES= http://www.rusf.ru/books/yo/src/ \ http://pankovpv.sovietservers.com/stuff/freebsd-distfiles/ DISTNAME= xcodesrc -MAINTAINER= pankov_p@mail.ru +MAINTAINER= ports@FreeBSD.org COMMENT= Program for converting Russian encodings with care to letter YO USES= zip PLIST_FILES= bin/xcode NO_WRKSUBDIR= yes MAKEFILE= makefile ALL_TARGET= xcode CFLAGS+= -DD_KOI NO_STAGE= yes do-install: @ ${INSTALL_PROGRAM} ${WRKSRC}/xcode ${PREFIX}/bin .include Index: head/science/2dhf/Makefile =================================================================== --- head/science/2dhf/Makefile (revision 362827) +++ head/science/2dhf/Makefile (revision 362828) @@ -1,86 +1,86 @@ # Created by: NAKATA, Maho # $FreeBSD$ PORTNAME= 2dhf PORTVERSION= 2005.05 PORTREVISION= 6 CATEGORIES= science MASTER_SITES= http://www.fizyka.umk.pl/~jkob/2dhf/ DISTNAME= ${PORTNAME}-05.05 EXTRACT_SUFX= .tgz -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Numerical Hartree-Fock Program for Diatomic Molecules BUILD_DEPENDS= bash:${PORTSDIR}/shells/bash .if defined(WITH_INTEL) USES+= fortran:ifort BUILD_DEPENDS+= ${LOCALBASE}/intel_cc_80/bin/icc:${PORTSDIR}/lang/icc .else USES+= fortran .endif .if exists(${LOCALBASE}/lib/libatlas.so) && !defined(WITH_BLAS) WITH_ATLAS= yes .endif .if defined(WITH_ATLAS) LIB_DEPENDS+= libatlas.so${PORTSDIR}/math/atlas BLAS= -lf77blas .else LIB_DEPENDS+= libblas.so:${PORTSDIR}/math/blas LIB_DEPENDS+= liblapack.so:${PORTSDIR}/math/lapack BLAS= -lblas .endif .if defined(WITH_OPTIMIZED_FLAGS) FFLAGS+= -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double .if (${MACHINE_ARCH} == "i386") FFLAGS+= -mfancy-math-387 .endif # i386 .endif .if defined(WITH_INTEL) FC= ${LOCALBASE}/intel_fc_80/bin/ifort CC= ${LOCALBASE}/intel_cc_80/bin/icc FFLAGS= -O3 -tpp7 -xKW -Vaxlib FFLAGS_ADD= -w -132 CFLAGS= -O3 -tpp7 -xKW -Vaxlib BLAS+= -lg2c -lm .else FFLAGS_ADD= -w -ffixed-line-length-none .endif WRKSRC= ${WRKDIR}/${PORTNAME} USES+= gmake ALL_TARGET= all NO_STAGE= yes pre-everything:: @${ECHO_CMD} "You can optimize by setting WITH_OPTIMIZED_FLAGS=yes." do-extract: ${MKDIR} ${WRKSRC} @(cd ${WRKSRC} ; ${TAR} xfz ${DISTDIR}/${DISTNAME}${EXTRACT_SUFX}) post-patch: @${REINPLACE_CMD} -e 's|%%FC%%|${FC}|g ; \ s|%%FFLAGS%%|${FFLAGS}|g ; \ s|%%FFLAGS_ADD%%|${FFLAGS_ADD}|g ; \ s|%%CC%%|${CC}|g ; \ s|%%CFLAGS%%|${CFLAGS}|g ; \ s|%%LOCALBASE%%|${LOCALBASE}|g ;\ s|%%BLAS%%|${BLAS}|g' \ ${WRKSRC}/Makefile @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \ ${WRKSRC}/bin/xhf do-install: @cd ${WRKSRC} ; ${INSTALL_PROGRAM} bin/x2dhf ${PREFIX}/bin/x2dhf @cd ${WRKSRC} ; ${INSTALL_SCRIPT} bin/xhf ${PREFIX}/bin/xhf .if !defined(NOPORTDOCS) @${MKDIR} ${DOCSDIR} @cd ${WRKSRC}/doc ; ${INSTALL_DATA} 2dhf.pdf users-guide.pdf users-guide.html ${DOCSDIR} @${MKDIR} ${EXAMPLESDIR} @cd ${WRKSRC}/examples/ ; ${TAR} -chf - . | \ ${TAR} -xf - -C ${EXAMPLESDIR} .endif .include Index: head/science/abinit/Makefile =================================================================== --- head/science/abinit/Makefile (revision 362827) +++ head/science/abinit/Makefile (revision 362828) @@ -1,88 +1,88 @@ # Created by: NAKATA Maho # $FreeBSD$ PORTNAME= abinit PORTVERSION= 5.7.3 PORTREVISION= 14 CATEGORIES= science MASTER_SITES= ftp://ftp.abinit.org/pub/abinitio/ABINIT_v${PORTVERSION}/ -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Abinit calculates electronic structure of systems BUILD_DEPENDS= python:${PORTSDIR}/lang/python \ ${PYTHON_SITELIBDIR}/numarray/__init__.py:${PORTSDIR}/math/py-numarray LIB_DEPENDS= libnetcdff.so:${PORTSDIR}/science/netcdf-fortran \ libgsl.so:${PORTSDIR}/math/gsl USES= fortran gmake perl5 USE_PYTHON= yes USE_PERL5= build USE_AUTOTOOLS= autoconf automake CONFIGURE_ENV= WGET=${TRUE} CONFIGURE_ARGS= --disable-wannier90 --disable-bigdft --disable-etsf-io \ --with-plugins-tardir=/dev/null \ --with-netcdf-includes="-I${LOCALBASE}/include" \ --enable-bindings --enable-gsl \ --with-netcdf-libs="-L${LOCALBASE}/lib -lnetcdff -lnetcdf" CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib OPTIONS_DEFINE= DOCS EXAMPLES NO_STAGE= yes .include .if ${PORT_OPTIONS:MDOCS} USE_TEX= latex:build dvipsk:build BUILD_DEPENDS+= gm4:${PORTSDIR}/devel/m4 \ markdown:${PORTSDIR}/textproc/markdown USE_GHOSTSCRIPT_BUILD= yes .endif .if ${ARCH} == "ia64" || ${ARCH} == "powerpc" || ${ARCH} == "sparc64" MANUAL_PACKAGE_BUILD= takes a tremendous amount of time to build on pointyhat nodes .endif .if exists(${LOCALBASE}/lib/libatlas.so) && !defined(WITH_BLAS) WITH_ATLAS= yes .endif .if defined(WITH_ATLAS) LIB_DEPENDS+= libatlas.so:${PORTSDIR}/math/atlas BLAS= -lf77blas LAPACK= -lalapack -lcblas .else LIB_DEPENDS+= libblas.so:${PORTSDIR}/math/blas LIB_DEPENDS+= liblapack.so:${PORTSDIR}/math/lapack BLAS= -lblas LAPACK= -llapack .endif pre-configure: .if ! ${PORT_OPTIONS:MDOCS} ${REINPLACE_CMD} -e '/^abinit_top_subdirs =/s| doc||' ${WRKSRC}/config/specs/other.cf .endif .if ! ${PORT_OPTIONS:MEXAMPLES} ${REINPLACE_CMD} -e '/^abinit_top_subdirs =/s| tests||' ${WRKSRC}/config/specs/other.cf .endif (cd ${WRKSRC} && ./config/scripts/makemake) ${CHMOD} a+x ${WRKSRC}/bindings/parser/*.py post-build: @(cd ${BUILD_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} \ ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} libabinit) post-install: ${MKDIR} ${PREFIX}/include ${PREFIX}/lib .for lf in libabinip.a libabinis.a ${INSTALL_DATA} ${WRKSRC}/${lf} ${PREFIX}/lib .endfor .for lf in ab_dtset_c.h dtset_c.h dtset_c.static.h dtset_f90.inc dtset_py.h \ ab_dtset_f90_get.f90 ${INSTALL_DATA} ${WRKSRC}/bindings/parser/${lf} ${PREFIX}/include .endfor regression-test: cd ${WRKSRC}/tests ; ${MAKE_CMD} tests_min .include Index: head/science/clhep/Makefile =================================================================== --- head/science/clhep/Makefile (revision 362827) +++ head/science/clhep/Makefile (revision 362828) @@ -1,34 +1,34 @@ # Created by: will # $FreeBSD$ PORTNAME= clhep PORTVERSION= 2.1.0.1 CATEGORIES= science MASTER_SITES= http://wwwasd.web.cern.ch/wwwasd/lhc++/clhep/DISTRIBUTION/tarFiles/ EXTRACT_SUFX= .tgz -MAINTAINER= dhn@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Object-oriented toolkit for particle physics applications by CERN WRKSRC= ${WRKDIR}/${PORTVERSION}/${PORTNAME:tu} USES= gmake perl5 USE_PERL5= build GNU_CONFIGURE= yes CONFIGURE_ARGS= --enable-gmake USE_LDCONFIG= yes PLIST_SUB= VERSION="${PORTVERSION}" NO_STAGE= yes .include .if ${OSVERSION} < 700000 BROKEN= Does not compile on FreeBSD 6.X .endif post-patch: @${FIND} ${WRKSRC} -name "configure" | ${XARGS} ${REINPLACE_CMD} -e \ '/AM_CXXFLAGS=/s|-O ||g' .include Index: head/science/fasthenry/Makefile =================================================================== --- head/science/fasthenry/Makefile (revision 362827) +++ head/science/fasthenry/Makefile (revision 362828) @@ -1,65 +1,65 @@ # Created by: Pedro Giffuni # $FreeBSD$ PORTNAME= fasthenry DISTVERSION= 3.0wr-021113 CATEGORIES= science cad MASTER_SITES= http://www.wrcad.com/ftp/pub/ LOCAL/bf -MAINTAINER= bf@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Multipole-accelerated inductance analysis program HAS_CONFIGURE= yes CONFIGURE_SCRIPT= config WRKSRC = ${WRKDIR}/fasthenry-3.0wr NO_STAGE= yes post-patch: @${REINPLACE_CMD} -Ee '/CFLAGS =/{s/=/+=/;s/-O[[:digit:]]*//;}' \ ${WRKSRC}/src/fasthenry/Makefile.default \ ${WRKSRC}/src/fasthenry/sparse/Makefile \ ${WRKSRC}/src/zbuf/Makefile.default #minimal changes to fix the clang build (there should be a more thorough #clean-up, to correct types of functions, remove implicit declarations, fix #formatting, add missing returns, etc.) @${REINPLACE_CMD} -e 's,return;,return 0;,' \ ${WRKSRC}/src/fasthenry/barnoldi.c \ ${WRKSRC}/src/fasthenry/contact.c \ ${WRKSRC}/src/fasthenry/findpaths.c \ ${WRKSRC}/src/fasthenry/fillM.c \ ${WRKSRC}/src/fasthenry/hole.c \ ${WRKSRC}/src/fasthenry/induct.c \ ${WRKSRC}/src/fasthenry/joelself.c \ ${WRKSRC}/src/fasthenry/mulSetup.c \ ${WRKSRC}/src/fasthenry/read_tree.c @${REINPLACE_CMD} -Ee \ '/^(AllocateBlockOfAllocationList|InitializeElementBlocks|RecordAllocation)/,/^\}/s/return;/return 0;/' \ ${WRKSRC}/src/fasthenry/sparse/spAllocate.c @${REINPLACE_CMD} -Ee \ '/^(EnlargeMatrix|ExpandTranslationArrays|spcLinkRows)/,/^\}/s/return;/return 0;/' \ ${WRKSRC}/src/fasthenry/sparse/spBuild.c @${REINPLACE_CMD} -Ee \ '/^(ComplexRowColElimination|CountMarkowitz|CreateInternalVectors|ExchangeColElements|ExchangeRowElements|ExchangeRowsAndCols|MarkowitzProducts|RealRowColElimination|UpdateMarkowitzNumbers|spcColExchange|spcRowExchange)/,/^\}/s/return;/return 0;/' \ ${WRKSRC}/src/fasthenry/sparse/spFactor.c @${REINPLACE_CMD} -Ee 's,^mul(Up|Down),void &,' \ ${WRKSRC}/src/fasthenry/mulDo.c @${REINPLACE_CMD} -e 's,^mulMatUp,void &,' \ ${WRKSRC}/src/fasthenry/mulMats.c do-install: @${INSTALL_PROGRAM} ${WRKSRC}/bin/fasthenry ${PREFIX}/bin/ @${INSTALL_PROGRAM} ${WRKSRC}/bin/zbuf ${PREFIX}/bin .if !defined(NOPORTDOCS) ${MKDIR} ${DOCSDIR} ${CAT} ${WRKSRC}/README ${WRKSRC}/README.mit > ${DOCSDIR}/readme ${CAT} ${WRKSRC}/doc/manual_*.ps > ${DOCSDIR}/manual.ps ${CAT} ${WRKSRC}/doc/nonuniform_manual_*.ps > ${DOCSDIR}/nonuniform_manual.ps ${INSTALL_DATA} ${WRKSRC}/doc/ms_thesis.ps ${DOCSDIR} ${GZIP_CMD} ${DOCSDIR}/* .endif .if !defined(NOPORTEXAMPLES) ${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/examples/* ${EXAMPLESDIR} .endif .include Index: head/science/g3data/Makefile =================================================================== --- head/science/g3data/Makefile (revision 362827) +++ head/science/g3data/Makefile (revision 362828) @@ -1,34 +1,34 @@ # Created by: trasz # $FreeBSD$ PORTNAME= g3data PORTVERSION= 1.5.3 PORTREVISION= 5 CATEGORIES= science MASTER_SITES= http://www.frantz.fi/software/ -MAINTAINER= bf@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Utility for extracting data from graphs BUILD_DEPENDS= nsgmls:${PORTSDIR}/textproc/jade \ ${LOCALBASE}/share/sgml/docbook/utils-0.6.14/helpers/docbook2man-spec.pl:${PORTSDIR}/textproc/docbook-utils \ ${LOCALBASE}/share/sgml/docbook/4.1:${PORTSDIR}/textproc/docbook-sgml USES= pkgconfig USE_GNOME= gtk20 ALL_TARGET= MAN1= g3data.1 MANCOMPRESSED= yes PLIST_FILES= bin/g3data %%EXAMPLESDIR%%/test1.png %%EXAMPLESDIR%%/test1.values \ %%EXAMPLESDIR%%/test2.png %%EXAMPLESDIR%%/test2.values PLIST_DIRS= %%EXAMPLESDIR%% NO_STAGE= yes post-install: @${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/test1.png ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/test1.values ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/test2.png ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/test2.values ${EXAMPLESDIR} .include Index: head/science/gamess/Makefile =================================================================== --- head/science/gamess/Makefile (revision 362827) +++ head/science/gamess/Makefile (revision 362828) @@ -1,164 +1,164 @@ # Created by: NAKATA Maho # $FreeBSD$ PORTNAME= gamess PORTVERSION= ${SNAPDATE} PORTREVISION= 1 CATEGORIES= science MASTER_SITES= #http://www.msg.ameslab.gov/GAMESS/License_Agreement.html DISTNAME= gamess-current DIST_SUBDIR= ${PORTNAME}/${PORTVERSION} -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Freely obtainable ab-initio molecular orbital calculation program USES= fortran gmake WRKSRC= ${WRKDIR}/gamess SNAPDATE= 20130501.1 RESTRICTED= No Redistribution .if !exists(${DISTDIR}/${DISTFILES}) IGNORE=you must manually get the source distribution from master site. http://www.msg.ameslab.gov/GAMESS/download.html. Please select "Source code distribution", and check on "running on Intel compatible PC running Linux". You must have license, and freely obtainable .endif MANUAL_PACKAGE_BUILD=You must manually get the source distribution from master site. http://www.msg.ameslab.gov/GAMESS/download.html. Please select "Source code distribution", and check on "running on Intel compatible PC running Linux". You must have license, and freely obtainable. NO_STAGE= yes .include .if exists(${LOCALBASE}/lib/libgoto2.so) WITH_BLAS?= gotoblas .elif exists(${LOCALBASE}/lib/libatlas.so) WITH_BLAS?= atlas .else WITH_BLAS?= reference .endif . if ${WITH_BLAS} == reference LIB_DEPENDS+= libblas.so:${PORTSDIR}/math/blas LIB_DEPENDS+= liblapack.so:${PORTSDIR}/math/lapack BLAS= -lblas LAPACK= -llapack .elif ${WITH_BLAS} == gotoblas LIB_DEPENDS+= libgoto2.so:${PORTSDIR}/math/gotoblas BLAS= -lgoto2p LAPACK= -lgoto2p .elif ${WITH_BLAS} == atlas LIB_DEPENDS+= libatlas.so:${PORTSDIR}/math/atlas BLAS= -lptf77blas LAPACK= -lalapack -lptcblas .endif .if defined(WITH_OPTIMIZED_FLAGS) .if ${ARCH} == "amd64" CFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time FFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time .elif ${ARCH} == "i386" CFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 FFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 .endif .endif #WITH_IFC= yes #currently building with ifc is broken .if defined(WITH_IFC) FC= ${LOCALBASE}/intel_fc_80/bin/ifort F77= ${LOCALBASE}/intel_fc_80/bin/ifort CC= ${LOCALBASE}/intel_cc_80/bin/icc FFLAGS= -axP -xW -ipo -O3 -Vaxlib CFLAGS= -axP -xW -ipo -O3 -Vaxlib LIBSVM= -lsvml LIBG2C= -lg2c .else LIBG2C= LIBSVM= .endif .if defined(WITH_IFC) FORTRAN= ifort .else FORTRAN= gfortran .endif pre-build: ${CP} ${FILESDIR}/install.info ${WRKSRC} ${CP} ${FILESDIR}/Makefile.top ${WRKSRC}/Makefile @${REINPLACE_CMD} -e 's+%%PREFIX%%+${PREFIX}+g' ${WRKSRC}/gms-files.csh .if ${ARCH} == "amd64" @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd64+g' ${WRKSRC}/comp @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd64+g' ${WRKSRC}/compall @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd64+g' ${WRKSRC}/ddi/compddi @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd64+g' ${WRKSRC}/lked @${REINPLACE_CMD} -e 's+%%GMS_TARGET%%+freebsd64+g' ${WRKSRC}/install.info .elif ${ARCH} == "i386" @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd32+g' ${WRKSRC}/comp @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd32+g' ${WRKSRC}/compall @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd32+g' ${WRKSRC}/ddi/compddi @${REINPLACE_CMD} -e 's+%%ARCH%%+freebsd32+g' ${WRKSRC}/lked @${REINPLACE_CMD} -e 's+%%GMS_TARGET%%+freebsd32+g' ${WRKSRC}/install.info .endif @${REINPLACE_CMD} -e 's+%%GMS_PATH%%+${WRKSRC}+g ; \ s+%%GMS_BUILD_DIR%%+${WRKSRC}+g ; \ s+%%GMS_FORTRAN%%+${FORTRAN}+g ; \ s+%%FC%%+${FC}+g ; \ s+%%GMS_GFORTRAN_VERNO%%+${GCC_DEFAULT_VERSION}+g ; \ s+%%GMS_DDI_COMM%%+sockets+g ; \ s+%%GMS_MATHLIB%%+none+g ; \ s+%%GMS_MATHLIB_PATH%%+${LOCALBASE}/lib+g' ${WRKSRC}/install.info ${REINPLACE_CMD} -e 's+%%FC%%+${FC}+g ; \ s+%%LDFLAGS%%+${LDFLAGS}+g ; \ s+%%LOCALBASE%%+${LOCALBASE}+g ; \ s+%%LIBSVM%%+${LIBSVM}+g ; \ s+%%LIBG2C%%+${LIBG2C}+g ; \ s+%%BLAS%%+${BLAS}+g ; \ s+%%PTHREAD_LIBS%%+${PTHREAD_LIBS}+g' \ ${WRKSRC}/lked ${REINPLACE_CMD} -e 's+%%FC%%+${FC}+g ; \ s+%%FFLAGS%%+${FFLAGS}+g' \ ${WRKSRC}/comp ${REINPLACE_CMD} -e 's+%%CC%%+${CC}+g' \ ${WRKSRC}/compall ${REINPLACE_CMD} -e 's+%%PREFIX%%+${PREFIX}+g' \ ${WRKSRC}/rungms ${REINPLACE_CMD} -e 's+%%FC%%+${FC}+g ; \ s+%%GMS_FORTRAN%%+${FORTRAN}+g ; \ s+%%PTHREAD_CFLAGS%%+${PTHREAD_CFLAGS}+g ; \ s+%%PTHREAD_LIBS%%+${PTHREAD_LIBS}+g ; \ s+%%UNDERSCORES%%+${UNDERSCORES}+g ; \ s+%%CC%%+${CC}+g' \ ${WRKSRC}/ddi/compddi ${CP} ${FILESDIR}/Makefile.tools ${WRKSRC}/tools/Makefile ${REINPLACE_CMD} -e 's+%%FC%%+${FC}+g ; \ s+%%FFLAGS%%+${FFLAGS}+g' \ ${WRKSRC}/tools/Makefile do-build: (cd ${WRKSRC}; ${MAKE_CMD}) do-install: ${MKDIR} ${PREFIX}/bin/gms ${MKDIR} ${PREFIX}/share/gamess ${MKDIR} ${PREFIX}/share/gamess/mcpdata ${MKDIR} ${PREFIX}/share/doc/gamess ${MKDIR} ${PREFIX}/share/examples/gamess ${INSTALL_SCRIPT} ${WRKDIR}/gamess/rungms ${PREFIX}/bin/gamess ${CHMOD} 555 ${PREFIX}/bin/gamess ${INSTALL_SCRIPT} ${WRKDIR}/gamess/gms-files.csh ${PREFIX}/bin/gms ${INSTALL_PROGRAM} ${WRKDIR}/gamess/gamess.00.x ${PREFIX}/bin/gms ${INSTALL_PROGRAM} ${WRKDIR}/gamess/ddi/ddikick.x ${PREFIX}/bin/gms ${INSTALL_DATA} ${WRKDIR}/gamess/*.DOC ${PREFIX}/share/doc/gamess/ ${INSTALL_DATA} ${WRKDIR}/gamess/tests/standard/*.inp ${PREFIX}/share/examples/gamess/ ${MKDIR} ${PREFIX}/share/gamess/auxdata ${MKDIR} ${PREFIX}/share/gamess/auxdata/BASES ${MKDIR} ${PREFIX}/share/gamess/auxdata/EFP ${MKDIR} ${PREFIX}/share/gamess/auxdata/MCP ${MKDIR} ${PREFIX}/share/gamess/auxdata/QUANPOL ${INSTALL_DATA} ${WRKDIR}/gamess/auxdata/ericfmt.dat ${PREFIX}/share/gamess/auxdata/ ${INSTALL_DATA} ${WRKDIR}/gamess/auxdata/BASES/* ${PREFIX}/share/gamess/auxdata/BASES ${INSTALL_DATA} ${WRKDIR}/gamess/auxdata/EFP/* ${PREFIX}/share/gamess/auxdata/EFP ${INSTALL_DATA} ${WRKDIR}/gamess/auxdata/MCP/* ${PREFIX}/share/gamess/auxdata/MCP ${INSTALL_DATA} ${WRKDIR}/gamess/auxdata/QUANPOL/* ${PREFIX}/share/gamess/auxdata/QUANPOL ${INSTALL_DATA} ${WRKDIR}/gamess/ddi/readme.ddi ${PREFIX}/share/doc/gamess/ .include Index: head/science/ghemical/Makefile =================================================================== --- head/science/ghemical/Makefile (revision 362827) +++ head/science/ghemical/Makefile (revision 362828) @@ -1,34 +1,34 @@ # Created by: Nakata Maho # $FreeBSD$ PORTNAME= ghemical PORTVERSION= 3.0.0 PORTREVISION= 3 CATEGORIES= science MASTER_SITES= http://bioinformatics.org/ghemical/download/release20111012/ \ http://bioinformatics.org/ghemical/download/current -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Ghemical is a computational chemistry software package BUILD_DEPENDS= f2c:${PORTSDIR}/lang/f2c \ obabel:${PORTSDIR}/science/openbabel \ ld:${PORTSDIR}/devel/binutils RUN_DEPENDS= f2c:${PORTSDIR}/lang/f2c LIB_DEPENDS= libmpqc.so:${PORTSDIR}/science/mpqc \ libgtkglext-x11-1.0.so:${PORTSDIR}/x11-toolkits/gtkglext \ libghemical.so:${PORTSDIR}/science/libghemical \ liboglappth.so:${PORTSDIR}/science/liboglappth \ libmopac7.so:${PORTSDIR}/biology/mopac USES= fortran gettext gmake pkgconfig USE_GNOME= glib20 gtk20 libglade2 USE_GL= glut GNU_CONFIGURE= yes CONFIGURE_ARGS= --enable-gamess --enable-mpqc --enable-openbabel --enable-gtk --enable-threads --enable-mopac7 PLIST_SUB= GHEMICAL_VERSION="${PORTVERSION}" MAKE_ENV= PKG_CONFIG=${LOCALBASE}/pkg-config NO_STAGE= yes .include Index: head/science/gramps/Makefile =================================================================== --- head/science/gramps/Makefile (revision 362827) +++ head/science/gramps/Makefile (revision 362828) @@ -1,58 +1,58 @@ # Created by: Andreas Fehlner # $FreeBSD$ PORTNAME= gramps PORTVERSION= 3.3.0 PORTREVISION= 2 CATEGORIES= science gnome python MASTER_SITES= SF/${PORTNAME}/Stable/${PORTVERSION} DISTNAME= ${PORTNAME}-${PORTVERSION}-1 -MAINTAINER= freebsd-ports@herveybayaustralia.com.au +MAINTAINER= ports@FreeBSD.org COMMENT= GTK/GNOME-based genealogy program LICENSE= GPLv2 LICENSE_FILE= ${WRKSRC}/COPYING RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}bsddb>0:${PORTSDIR}/databases/py-bsddb \ ${PYXML} USE_BDB= 43 USE_PYTHON= yes USES= desktop-file-utils gettext pathfix shared-mime-info gmake USE_GNOME= pygnome2 pygnomeextras gnomedocutils GNU_CONFIGURE= yes INSTALLS_OMF= yes INSTALLS_ICONS= yes CONFIGURE_ENV+= GMSGFMT="${LOCALBASE}/bin/msgfmt" WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION} MAN1= gramps.1 MANLANG= "" cs fr nl pl sv OPTIONS_DEFINE= ENCHANT PYWEBKITGTK GRAPHVIZ EXIV OPTIONS_DEFAULT= PYWEBKITGTK GRAPHVIZ EXIV ENCHANT_DESC= Spellchecking support PYWEBKITGTK_DESC= Use webkit backend for Geographic view EXIV_DESC= Managing exiv metadata support NO_STAGE= yes .include .if ${PORT_OPTIONS:MENCHANT} RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}enchant>=0:${PORTSDIR}/textproc/py-enchant .endif .if ${PORT_OPTIONS:MPYWEBKITGTK} RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}webkitgtk>=0:${PORTSDIR}/www/py-webkitgtk .endif .if ${PORT_OPTIONS:MGRAPHVIZ} RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}graphviz>-0:${PORTSDIR}/graphics/py-graphviz .endif .if ${PORT_OPTIONS:MEXIV} RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}exiv2>=0.1.3:${PORTSDIR}/graphics/py-exiv2 .endif post-install: @${CAT} ${PKGMESSAGE} .include Index: head/science/libghemical/Makefile =================================================================== --- head/science/libghemical/Makefile (revision 362827) +++ head/science/libghemical/Makefile (revision 362828) @@ -1,31 +1,31 @@ # Created by: Nakata Maho # $FreeBSD$ PORTNAME= libghemical PORTVERSION= 3.0.0 PORTREVISION= 2 CATEGORIES= science MASTER_SITES= http://bioinformatics.org/ghemical/download/release20111012/ \ http://bioinformatics.org/ghemical/download/current -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Support libraries of science/ghemical port BUILD_DEPENDS= obabel:${PORTSDIR}/science/openbabel \ intltool-update:${PORTSDIR}/textproc/intltool \ ld:${PORTSDIR}/devel/binutils LIB_DEPENDS+= libmpqc.so:${PORTSDIR}/science/mpqc \ libf2c.so:${PORTSDIR}/lang/f2c USES= fortran gettext gmake pathfix pkgconfig USE_GL= gl GNU_CONFIGURE= yes USE_LDCONFIG= yes CONFIGURE_ARGS+= --enable-mpqc CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib PLIST_SUB= LIBGHEMICAL_VERSION="${PORTVERSION}" NO_STAGE= yes .include Index: head/science/libint/Makefile =================================================================== --- head/science/libint/Makefile (revision 362827) +++ head/science/libint/Makefile (revision 362828) @@ -1,28 +1,28 @@ # Created by: NAKATA, Maho # $FreeBSD$ PORTNAME= libint PORTVERSION= 1.1.4 CATEGORIES= science MASTER_SITES= http://www.files.chem.vt.edu/chem-dept/valeev/software/libint/src/ -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Evaluate the integrals in modern atomic and molecular theory USES= perl5 gmake USE_LDCONFIG= yes ALL_TARGET= # empty GNU_CONFIGURE= yes CONFIGURE_ARGS= --enable-shared NO_STAGE= yes post-patch: @${REINPLACE_CMD} -e 's|echo aout|echo elf|' ${WRKSRC}/configure post-install: @${LN} -sf ${PREFIX}/lib/libderiv-stable.so.1 ${PREFIX}/lib/libderiv.so.1 @${LN} -sf ${PREFIX}/lib/libint-stable.so.1 ${PREFIX}/lib/libint.so.1 @${LN} -sf ${PREFIX}/lib/libr12-stable.so.1 ${PREFIX}/lib/libr12.so.1 .include Index: head/science/mbdyn/Makefile =================================================================== --- head/science/mbdyn/Makefile (revision 362827) +++ head/science/mbdyn/Makefile (revision 362828) @@ -1,104 +1,104 @@ # Created by: Kay Lehmann # $FreeBSD$ PORTNAME= mbdyn PORTVERSION= 1.4.0 PORTREVISION= 3 CATEGORIES= science MASTER_SITES= http://www.aero.polimi.it/~masarati/Download/mbdyn/ -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= MultiBody Dynamics analysis system LICENSE= GPLv2 LIB_DEPENDS= libarpack.so:${PORTSDIR}/math/arpack \ libumfpack.so:${PORTSDIR}/math/suitesparse GNU_CONFIGURE= yes USES= fortran gmake MAN1= mbdyn.1 CPPFLAGS+= -fpermissive -I${LOCALBASE}/include/suitesparse LDFLAGS+= -L${LOCALBASE}/lib CONFIGURE_ARGS+= --program-prefix='' OPTIONS_DEFINE= MPI METIS CHACO GINAC TCL MPI_DESC= Enable mpich-support METIS_DESC= Enable metis-support CHACO_DESC= Enable chaco-support GINAC_DESC= Enable GiNaC-support (not implemented yet) TCL_DESC= Enable tcl-support (not implemented yet) NO_STAGE= yes .include .if ${ARCH} == "powerpc" BROKEN= Does not compile on powerpc .endif WITH_BLAS?= reference . if ${WITH_BLAS} == reference LIB_DEPENDS+= libblas.so:${PORTSDIR}/math/blas \ liblapack.so:${PORTSDIR}/math/lapack CONFIGURE_ARGS+= --with-blas=blas LAPACK_LIBS= -llapack .elif ${WITH_BLAS} == gotoblas LIB_DEPENDS+= libgoto.so:${PORTSDIR}/math/gotoblas CONFIGURE_ARGS+= --with-blas=goto --with-goto=goto2 LAPACK_LIBS= -lgoto2 .elif ${WITH_BLAS} == atlas LIB_DEPENDS+= libatlas.so:${PORTSDIR}/math/atlas CONFIGURE_ARGS+= --with-blas=atlas LAPACK_LIBS= -lalapack .endif .if ${PORT_OPTIONS:MMPI} LIB_DEPENDS+= libmpich.so:${PORTSDIR}/net/mpich2 CONFIGURE_ARGS+= --with-mpi=yes --enable-schur CPPFLAGS+= -I${LOCALBASE}/include . if ! ${PORT_OPTIONS:MMETIS} WITH_CHACO= yes . endif .else CONFIGURE_ARGS+= --with-mpi=no .endif .if ${PORT_OPTIONS:MMETIS} LIB_DEPENDS+= libmetis.so:${PORTSDIR}/math/metis4 CONFIGURE_ARGS+= --with-metis=yes CPPFLAGS+= -I${LOCALBASE}/include/metis .else CONFIGURE_ARGS+= --with-metis=no .endif .if ${PORT_OPTIONS:MCHACO} BUILD_DEPENDS+= ${LOCALBASE}/lib/libchaco.a:${PORTSDIR}/math/chaco CONFIGURE_ARGS+= --with-chaco=yes .else CONFIGURE_ARGS+= --with-chaco=no .endif .if ${PORT_OPTIONS:MGINAC} LIB_DEPENDS+= libmetis.so:${PORTSDIR}/math/metis4 \ ginac:${PORTSDIR}/math/GiNaC CONFIGURE_ARGS+= --with-ginac=yes CPPFLAGS+= -I${LOCALBASE}/include/metis .else CONFIGURE_ARGS+= --with-ginac=no .endif .if ${PORT_OPTIONS:MTCL} IGNORE= you enabled Tcl-support, which is not implemented yet LIB_DEPENDS+= libtcl84.so:${PORTSDIR}/lang/tcl84 CONFIGURE_ARGS+= --with-tcl=yes CPPFLAGS+= -I${LOCALBASE}/include/tcl8.4 .else CONFIGURE_ARGS+= --with-tcl=no .endif post-patch: ${REINPLACE_CMD} -e '/try_lapack_LIBS=/s/-llapack/${LAPACK_LIBS}/' \ ${WRKSRC}/configure .include Index: head/science/psi3/Makefile =================================================================== --- head/science/psi3/Makefile (revision 362827) +++ head/science/psi3/Makefile (revision 362828) @@ -1,111 +1,111 @@ # Created by: NAKATA Maho # $FreeBSD$ PORTNAME= psi3 PORTVERSION= 3.4.0 PORTREVISION= 4 CATEGORIES= science MASTER_SITES= SF/psicode/psi/${PORTVERSION} \ http://www.psicode.org/doc/:doc \ ${MASTER_SITE_LOCAL:S|%SUBDIR%|maho/psi3|}:doc DISTNAME= psi-${PORTVERSION} .if !defined(NOPORTDOCS) DISTFILES+= ${DISTNAME}${EXTRACT_SUFX} installation.pdf:doc userman.pdf:doc progman.pdf:doc .endif DIST_SUBDIR= psi3 EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX} -MAINTAINER= maho@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Electronic structure programs for high-accuracy computations BROKEN= Fails to build .if exists(${LOCALBASE}/lib/libgoto2.so) WITH_BLAS?= gotoblas .elif exists(${LOCALBASE}/lib/libatlas.so) WITH_BLAS?= atlas .else WITH_BLAS?= reference .endif . if ${WITH_BLAS} == reference LIB_DEPENDS+= libblas.so:${PORTSDIR}/math/blas LIB_DEPENDS+= liblapack.so:${PORTSDIR}/math/lapack BLAS= -lblas LAPACK= -llapack .elif ${WITH_BLAS} == gotoblas LIB_DEPENDS+= libgoto2.so:${PORTSDIR}/math/gotoblas LIB_DEPENDS+= liblapack.so:${PORTSDIR}/math/lapack BLAS= -lgoto2p LAPACK= -lgoto2p .elif ${WITH_BLAS} == atlas LIB_DEPENDS+= libatlas.so:${PORTSDIR}/math/atlas BLAS= -lptf77blas LAPACK= -lalapack -lptcblas .endif USE_BZIP2= yes GNU_CONFIGURE= yes USES= fortran gmake CONFIGURE_ARGS= --with-cc=${CC} \ --with-cxx=${CXX} \ --with-fc=${FC} \ --with-opt="${CFLAGS}" \ --with-lapack="${LAPACK}" \ --with-blas="${BLAS}" \ --datadir=${PREFIX}/share/psi3 \ --docdir=${WRKSRC}/tmpdoc/ \ --with-libdirs="-L${LOCALBASE}/lib" \ --with-libs="-lcompat" CFLAGS+= -Wno-error=return-type NO_STAGE= yes .include .if defined(WITH_OPTIMIZED_FLAGS) FFLAGS+= -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double CFLAGS+= -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double CXXFLAGS+= -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -Wno-multichar .if (${ARCH} == "i386") FFLAGS+= -mfancy-math-387 CFLAGS+= -mfancy-math-387 CXXFLAGS+= -mfancy-math-387 .endif # i386 .endif WRKSRC= ${WRKDIR}/${PORTNAME} MAN1= ccenergy.1 cceom.1 cints.1 clag.1 cscf.1 dboc.1 detcas.1 \ detcasman.1 detci.1 geom.1 input.1 intder.1 mocube.1 mp2.1 mp2r12.1 \ nonbonded.1 oeprop.1 optking.1 psi3.1 psiclean.1 stable.1 tocprint.1 \ transqt.1 pre-configure: @${ECHO} "You can optimize by setting WITH_OPTIMIZED_FLAGS=yes." @${REINPLACE_CMD} -e 's|%%PTHREAD_CFLAGS%%|${PTREAD_CFLAGS}|g ; \ s|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g' ${WRKSRC}/src/bin/cints/Makefile.in @${REINPLACE_CMD} -e 's|%%PTHREAD_CFLAGS%%|${PTREAD_CFLAGS}|g ; \ s|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g' ${WRKSRC}/src/bin/detci/Makefile.in MAKE_ENV+= SCRATCH=${WRKSRC}/tmp do-build: @(cd ${WRKSRC} ; ${SETENV} ${MAKE_ENV} ${MAKE_CMD}) do-install: @(cd ${WRKSRC} ; ${SETENV} ${MAKE_ENV} ${MAKE_CMD} install) @${TAR} cf - -C ${WRKSRC}/tmpdoc/man . | ${TAR} xf - -C ${PREFIX}/man .if !defined(NOPORTDOCS) @${MKDIR} ${PREFIX}/share/doc/psi3 @${TAR} cf - -C ${WRKSRC}/tmpdoc/html . | ${TAR} xf - -C ${PREFIX}/share/doc/psi3 @${TAR} cf - -C ${WRKSRC}/tmpdoc/txt . | ${TAR} xf - -C ${PREFIX}/share/doc/psi3 @${INSTALL_DATA} ${DISTDIR}/${DIST_SUBDIR}/installation.pdf ${DOCSDIR} @${INSTALL_DATA} ${DISTDIR}/${DIST_SUBDIR}/userman.pdf ${DOCSDIR} @${INSTALL_DATA} ${DISTDIR}/${DIST_SUBDIR}/progman.pdf ${DOCSDIR} .endif .if !defined(NOPORTEXAMPLES) @${MKDIR} ${PREFIX}/share/examples/psi3 @${TAR} cf - -C ${WRKSRC}/tests . | ${TAR} xf - -C ${PREFIX}/share/examples/psi3 .endif .include Index: head/science/py-paida/Makefile =================================================================== --- head/science/py-paida/Makefile (revision 362827) +++ head/science/py-paida/Makefile (revision 362828) @@ -1,24 +1,24 @@ # Created by: Vsevolod Stakhov # $FreeBSD$ PORTNAME= paida PORTVERSION= 3.2.1.2.10 PORTREVISION= 1 CATEGORIES= science python MASTER_SITES= SF/${PORTNAME}/${PORTNAME}/${PORTNAME}-3.2.1_2.10.1 PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} DISTNAME= ${PORTNAME}-3.2.1_2.10.1 -MAINTAINER= wenheping@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= Pure Python scientific analysis package .if !defined(NO_GUI) BUILD_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}tkinter>0:${PORTSDIR}/x11-toolkits/py-tkinter .endif USE_PYTHON= yes USE_PYDISTUTILS= yes PYDISTUTILS_PKGVERSION= 3.2.1_2.10.1 NO_STAGE= yes .include Index: head/science/pycdf/Makefile =================================================================== --- head/science/pycdf/Makefile (revision 362827) +++ head/science/pycdf/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: wenheping@gmail.com # $FreeBSD$ PORTNAME= pycdf PORTVERSION= 0.6.3 PORTREVISION= 3 CATEGORIES= science python MASTER_SITES= SF/pysclint/${PORTNAME}/${PORTNAME}-${PORTVERSION}b DISTNAME= ${PORTNAME}-0.6-3b -MAINTAINER= wenheping@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= Python Interface to the Unidata NetCDF Library BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/numpy:${PORTSDIR}/math/py-numpy LIB_DEPENDS= libnetcdf.so:${PORTSDIR}/science/netcdf RUN_DEPENDS:= ${BUILD_DEPENDS} LDFLAGS+= "-L${LOCALBASE}/lib" USE_PYTHON= yes USE_PYDISTUTILS= yes PYTHON_PKGNAMEPREFIX= yes PYDISTUTILS_EGGINFO= pycdf-0.6_3b-py${PYTHON_VER}.egg-info WRKSRC= ${WRKDIR}/${DISTNAME} NO_STAGE= yes .include Index: head/science/vmd/Makefile =================================================================== --- head/science/vmd/Makefile (revision 362827) +++ head/science/vmd/Makefile (revision 362828) @@ -1,92 +1,92 @@ # Created by: Stephen Montgomery-Smith # $FreeBSD$ PORTNAME= vmd DISTVERSION= 1.9.1 PORTREVISION= 1 CATEGORIES= science graphics python tcl tk MASTER_SITES= http://jedi.ks.uiuc.edu/~johns/raytracer/files/0.99b2/:tachyon \ http://www.photonlimited.com/~johns/tachyon/files/0.99b2/:tachyon \ http://www.ks.uiuc.edu/Research/vmd/extsrcs/:stride DISTFILES= ${VMD_DIST} \ ${TACHYON_DIST}:tachyon \ ${STRIDE_DIST}:stride -MAINTAINER= bjk@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Molecular visualization program BUILD_DEPENDS= makedepend:${PORTSDIR}/devel/makedepend \ ${PYNUMERIC} LIB_DEPENDS= libtcl85.so:${PORTSDIR}/lang/tcl85 \ libtk85.so:${PORTSDIR}/x11-toolkits/tk85 \ libfltk.so:${PORTSDIR}/x11-toolkits/fltk \ libnetcdf.so:${PORTSDIR}/science/netcdf RUN_DEPENDS= ${PYNUMERIC} USES= gmake perl5 USE_PERL5= build USE_GL= glu USE_PYTHON= yes ONLY_FOR_ARCHS= i386 amd64 RESTRICTED= License has restrictions VMD_DIST= ${PORTNAME}-${DISTVERSION}.src.tar.gz TACHYON_DIST= tachyon-0.99b2.tar.gz # I get stride.tar.gz from ftp://ftp.ebi.ac.uk/pub/software/unix/stride/src/ # but the www.ks.uiuc.edu site (that gives Stride_src.tar.Z) is closer # to vmd upstream (and google actually knows about it). #STRIDE_DIST= stride.tar.gz STRIDE_DIST= Stride_src.tar.Z NO_STAGE= yes .include .if ${ARCH} == "amd64" VMD_ARCH= FREEBSDAMD64 VMD_TARGET= freebsd.amd64.opengl .else VMD_ARCH= FREEBSD VMD_TARGET= freebsd.opengl .endif PLIST_SUB+= VMD_ARCH=${VMD_ARCH} # Check for VMD sources .if !exists(${DISTDIR}/${VMD_DIST}) IGNORE= Because of licensing restrictions, you must fetch the source distribution manually. Please access http://www.ks.uiuc.edu/Development/Download/download.cgi?PackageName=VMD with a web browser. You will be required to log in and register, but you can create an account on this page. After registration and accepting the University of Illinois agreement, download the source file, ${VMD_DIST}. Please place this file in ${DISTDIR}, and re-run make .endif do-extract: ${MKDIR} ${WRKDIR} ${TAR} xfz ${DISTDIR}/${VMD_DIST} -C ${WRKDIR} ${TAR} xfz ${WRKSRC}/lib/surf/surf.tar.Z -C ${WRKSRC}/lib/surf ${TAR} xfz ${DISTDIR}/${TACHYON_DIST} -C ${WRKSRC}/lib ${TAR} xfz ${DISTDIR}/${STRIDE_DIST} -C ${WRKSRC}/lib/stride post-patch: ${REINPLACE_CMD} "s/-lpthread/${PTHREAD_LIBS}/" ${WRKSRC}/configure ${REINPLACE_CMD} "s/-ltk8.5/-ltk85/" ${WRKSRC}/configure ${REINPLACE_CMD} "s/-ltcl8.5/-ltcl85/" ${WRKSRC}/configure ${REINPLACE_CMD} "s%\$$python_dir/lib_\$$config_arch%${PREFIX}%" ${WRKSRC}/configure ${REINPLACE_CMD} "s/python2.5/${PYTHON_VERSION}/" ${WRKSRC}/configure ${REINPLACE_CMD} "s/.SILENT:/#.SILENT:/" ${WRKDIR}/plugins/Makefile ${REINPLACE_CMD} "s/.SILENT:/#.SILENT:/" ${WRKDIR}/plugins/*/Makefile ${REINPLACE_CMD} "s%log2f(\([^ ,]*\))%logf(\1)/(float)M_LN2%g" ${WRKSRC}/src/Orbital.C ${REINPLACE_CMD} -e "s|%%PREFIX%%|${PREFIX}|g" \ -e "s|/usr/local|${LOCALBASE}|g" ${WRKSRC}/configure do-build: ${SETENV} ${MAKE_ENV} ${MAKE_CMD} bsd -C ${WRKSRC}/lib/tachyon/unix && ${MV} ${WRKSRC}/lib/tachyon/compile/bsd/tachyon ${WRKSRC}/lib/tachyon/tachyon_${VMD_ARCH} ${SETENV} ${MAKE_ENV} TCLLIB=-L${PREFIX}/lib/tcl8.5 TCLINC=-I${PREFIX}/include/tcl8.5 PLUGINDIR=${WRKSRC}/plugins ${MAKE_CMD} ${VMD_ARCH} distrib -C ${WRKDIR}/plugins ${SETENV} ${MAKE_ENV} TCL_INCLUDE_DIR=${PREFIX}/include/tcl8.5 TK_INCLUDE_DIR=${PREFIX}/include/tk8.5 ${MAKE_CMD} ${VMD_TARGET} -C ${WRKSRC} ${SETENV} ${MAKE_ENV} ${MAKE_CMD} all -C ${WRKSRC}/src ${SETENV} ${MAKE_ENV} ${MAKE_CMD} depend -C ${WRKSRC}/lib/surf && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} surf -C ${WRKSRC}/lib/surf && ${MV} ${WRKSRC}/lib/surf/surf ${WRKSRC}/lib/surf/surf_${VMD_ARCH} ${SETENV} ${MAKE_ENV} ${MAKE_CMD} -C ${WRKSRC}/lib/stride && ${MV} ${WRKSRC}/lib/stride/stride ${WRKSRC}/lib/stride/stride_${VMD_ARCH} do-install: ${SETENV} ${MAKE_ENV} ${MAKE_CMD} -C ${WRKSRC}/src install @${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${PREFIX}/lib/vmd .include Index: head/science/x11iraf/Makefile =================================================================== --- head/science/x11iraf/Makefile (revision 362827) +++ head/science/x11iraf/Makefile (revision 362828) @@ -1,43 +1,43 @@ # Created by: David Syphers # $FreeBSD$ PORTNAME= x11iraf PORTVERSION= 1.3.1 PORTREVISION= 3 CATEGORIES= science astro MASTER_SITES= ftp://iraf.noao.edu/iraf/x11iraf/ DISTNAME= x11iraf-v${PORTVERSION}-bin.freebsd -MAINTAINER= dsyphers@u.washington.edu +MAINTAINER= ports@FreeBSD.org COMMENT= Provides graphical tools to work with IRAF CONFLICTS= xterm-[0-9]* LIB_DEPENDS= libc.so.4:${PORTSDIR}/misc/compat4x NO_BUILD= yes # this may work on other archs, but I'm making no bets ONLY_FOR_ARCHS= i386 BINS= ism_wcspix.e obmsh resize vximtool xgterm ximtool xtapemon MAN1= obmsh.1 \ resize.1 \ vximtool.1 \ xgterm.1 \ ximtool.1 \ xtapemon.1 NO_STAGE= yes do-install: @${ECHO_MSG} "===> Installing binaries" @${INSTALL_PROGRAM} ${BINS:S|^|${WRKDIR}/bin.freebsd/|} ${PREFIX}/bin/ @${INSTALL_SCRIPT} ${WRKDIR}/bin.freebsd/ximtool-alt ${PREFIX}/bin/ @${ECHO_MSG} "===> Installing manpages" @${INSTALL_MAN} ${WRKDIR}/man/* ${PREFIX}/man/man1/ @${ECHO_MSG} "===> Installing CDL library" @${INSTALL_DATA} ${WRKDIR}/include/* ${PREFIX}/include/ @${INSTALL_DATA} ${WRKDIR}/lib.freebsd/libcdl.a ${PREFIX}/lib/ .include Index: head/science/xmds/Makefile =================================================================== --- head/science/xmds/Makefile (revision 362827) +++ head/science/xmds/Makefile (revision 362828) @@ -1,31 +1,31 @@ # Created by: EelVex # $FreeBSD$ PORTNAME= xmds PORTVERSION= 1.6 CATEGORIES= science MASTER_SITES= SF/${PORTNAME}/${PORTNAME}/${PORTNAME}-${PORTVERSION}.5 DISTNAME= xmds-1.6.5 -MAINTAINER= mplekos@physics.upatras.gr +MAINTAINER= ports@FreeBSD.org COMMENT= XMDS is a code generator that integrates equations; MAN1= loadxsil.1 xmds.1 xsil2graphics.1 OPTIONS_DEFINE= FFTW3 FFTW3_DESC= Use fftw3 instead of fftw2 GNU_CONFIGURE= yes NO_STAGE= yes .include .if ${PORT_OPTIONS:MFFTW3} BUILD_DEPENDS= ${LOCALBASE}/include/fftw3.h:${PORTSDIR}/math/fftw3 CONFIGURE_ARGS= --enable-fftw3 --with-fftw3-path=${LOCALBASE} .else BUILD_DEPENDS= ${LOCALBASE}/include/fftw.h:${PORTSDIR}/math/fftw CONFIGURE_ARGS= --with-fftw-path=${LOCALBASE} .endif .include Index: head/security/zxid/Makefile =================================================================== --- head/security/zxid/Makefile (revision 362827) +++ head/security/zxid/Makefile (revision 362828) @@ -1,59 +1,59 @@ # Created by: Gea-Suan Lin # $FreeBSD$ PORTNAME= zxid PORTVERSION= 1.05 PORTREVISION= 1 CATEGORIES= security www MASTER_SITES= http://zxid.org/ EXTRACT_SUFX= .tgz -MAINTAINER= clsung@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Open Source IdM for the Masses - SAML SSO LIB_DEPENDS= libcurl.so:${PORTSDIR}/ftp/curl MAKE_JOBS_UNSAFE= yes CFLAGS+= -D_LSEEK_DECLARED -fPIC MAKE_ARGS= CC="${CC}" CURL_ROOT="${LOCALBASE}" LD="${CC}" \ PREFIX="${PREFIX}" OPENSSL_ROOT="${OPENSSLBASE}" USES= gmake USE_CSTD= gnu89 USE_LDCONFIG= yes USE_OPENSSL= yes ZXID_BINS= smime zxcall zxcot zxdecode zxencdectest zxid zxidhlo \ zxidhlowsf zxidhrxmlwsc zxidhrxmlwsp zxididp zxidsimple \ zxidwsctool zxlogview zxpasswd NO_STAGE= yes OPTIONS_DEFINE= DOCS .include post-patch: @${REINPLACE_CMD} -e '/which gcc/d' \ -e 's/ --export-all-symbols/ /g' \ ${WRKSRC}/Makefile post-install: ${MKDIR} ${PREFIX}/include/zxid/ cd ${WRKSRC}/ && ${INSTALL_PROGRAM} ${ZXID_BINS} ${PREFIX}/bin/ ${INSTALL_LIB} ${WRKSRC}/libzxid.a ${PREFIX}/lib/ ${INSTALL_LIB} ${WRKSRC}/libzxid.so.0.0 ${PREFIX}/lib/libzxid.so.0 ${LN} -sf libzxid.so.0 ${PREFIX}/lib/libzxid.so cd ${WRKSRC}/ && ${INSTALL_DATA} *.h c/*.h ${PREFIX}/include/zxid/ .if ${PORT_OPTIONS:MDOCS} ${MKDIR} ${DOCSDIR}/ cd ${WRKSRC}/ && ${INSTALL_DATA} *.pd ${DOCSDIR}/ .endif .include .if ${ARCH} == "powerpc" || ${ARCH} == "sparc64" BROKEN= Does not install .endif .include Index: head/sysutils/downtimed/Makefile =================================================================== --- head/sysutils/downtimed/Makefile (revision 362827) +++ head/sysutils/downtimed/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: Janne Snabb # $FreeBSD$ PORTNAME= downtimed PORTVERSION= 0.6 CATEGORIES= sysutils MASTER_SITES= http://dist.epipe.com/${PORTNAME}/ \ http://launchpadlibrarian.net/145993356/ -MAINTAINER= snabb@epipe.com +MAINTAINER= ports@FreeBSD.org COMMENT= System downtime monitoring and reporting tool LICENSE= BSD LICENSE_FILE= ${WRKSRC}/LICENSE USE_XZ= yes MAN1= downtimes.1 MAN8= downtimed.8 USE_RC_SUBR= ${PORTNAME} GNU_CONFIGURE= yes NO_STAGE= yes post-install: @${MKDIR} /var/db/downtimed @${CAT} ${PKGMESSAGE} .include Index: head/www/links-hacked/Makefile =================================================================== --- head/www/links-hacked/Makefile (revision 362827) +++ head/www/links-hacked/Makefile (revision 362828) @@ -1,102 +1,102 @@ # Created by: Peter Vereshagin # $FreeBSD$ PORTNAME= links-hacked DISTVERSION= 101110 PORTREVISION= 3 CATEGORIES?= www MASTER_SITES= http://xray.sai.msu.ru/~karpov/links-hacked/downloads/ http://links-hacked.nm.ru/ -MAINTAINER= peter@vereshagin.org +MAINTAINER= ports@FreeBSD.org COMMENT= Hacked version of a Links WWW browser LIB_DEPENDS+= libexecinfo.so:${PORTSDIR}/devel/libexecinfo \ libgdbm.so:${PORTSDIR}/databases/gdbm CONFLICTS= links-[0-9]* USE_AUTOTOOLS?= autoconf autoheader aclocal automake AUTOMAKE_ARGS?= -a -c GNU_CONFIGURE= yes CONFIGURE_ARGS+= --with-ssl --without-pmshell --without-atheos \ --without-fb --enable-form-saving --enable-javascript CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib -lexecinfo USE_OPENSSL= yes OPTIONS_DEFINE= SVGALIB DIRECTFB X11 FORMSAVE JS FREETYPE OPTIONS_DEFAULT= X11 FORMSAVE JS FREETYPE DIRECTFB_DESC= directfb driver support FORMSAVE_DESC= Enable forms saving JS_DESC= Enable Javascript (very basic) NO_STAGE= yes .include .if ${PORT_OPTIONS:MSVGALIB} || ${PORT_OPTIONS:MX11} || ${PORT_OPTIONS:MDIRECTFB} LIB_DEPENDS+= libpng15.so:${PORTSDIR}/graphics/png \ libjpeg.so:${PORTSDIR}/graphics/jpeg \ libtiff.so:${PORTSDIR}/graphics/tiff CONFIGURE_ARGS+= --enable-graphics .else CONFIGURE_ARGS+= --disable-graphics --without-libjpeg --without-libtiff .endif .if ${PORT_OPTIONS:MSVGALIB} LIB_DEPENDS+= libvga.so:${PORTSDIR}/graphics/svgalib CONFIGURE_ARGS+= --with-svgalib .else CONFIGURE_ARGS+= --without-svgalib .endif .if ${PORT_OPTIONS:MDIRECTFB} LIB_DEPENDS+= libdirectfb-1.4.so:${PORTSDIR}/devel/directfb CONFIGURE_ARGS+= --with-directfb .else CONFIGURE_ARGS+= --without-directfb .endif .if ${PORT_OPTIONS:MX11} USE_XORG= x11 xproto CONFIGURE_ARGS+= --with-x DESKTOP_ENTRIES="Links" \ "Lynx-like hacked WWW browser" \ "${PREFIX}/share/pixmaps/links.xpm" \ "links -g" \ "Network;WebBrowser;" \ false PLIST_FILES+= share/pixmaps/links.xpm .else CONFIGURE_ARGS+= --without-x .endif .if ${PORT_OPTIONS:MFREETYPE} LIB_DEPENDS+= libfreetype.so:${PORTSDIR}/print/freetype2 CONFIGURE_ARGS+= --with-freetype .else CONFIGURE_ARGS+= --without-freetype .endif .if ${PORT_OPTIONS:MFORMSAVE} CONFIGURE_ARGS+= --enable-form-saving .else CONFIGURE_ARGS+= --disable-form-saving .endif .if ${PORT_OPTIONS:MJS} CONFIGURE_ARGS+= --enable-javascript .else CONFIGURE_ARGS+= --disable-javascript .endif MAN1= links.1 PLIST_FILES+= bin/links .if ${PORT_OPTIONS:MX11} post-install: @${INSTALL_DATA} ${WRKSRC}/graphics/links.xpm ${PREFIX}/share/pixmaps/links.xpm .endif .include Index: head/www/lusca-head/Makefile =================================================================== --- head/www/lusca-head/Makefile (revision 362827) +++ head/www/lusca-head/Makefile (revision 362828) @@ -1,397 +1,397 @@ # Created by: Adrian Chadd # $FreeBSD$ # $FreeBSD$ # NO_STAGE= yes # Tunables not (yet) configurable via 'make config': # SQUID_{U,G}ID # Which user/group Squid should run as (default: squid/squid). # The user and group will be created if they do not already exist using # a uid:gid of 100:100. # NOTE: older versions of Squid defaulted to nobody/nogroup. # If you wish to run Squid as "nobody" (which is not recommended), please # define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment # before you start the update or installation of this port. # # SQUID_LANGUAGES # A list of languages for which error page files should be installed # (default: all) # # E.g. use `make SQUID_LANGUAGES="English French"' if you want to # install the files for these languages only. # Use `make -VSQUID_LANGUAGES' or scroll down to this variable's # definition to see which values are valid. # # SQUID_DEFAULT_LANG # If you define SQUID_LANGUAGES, select which language should be the default # one (this variable defaults to English). This setting can be overwritten # with squid.conf's error_directory directive. # # SQUID_CONFIGURE_ARGS # Additional configuration options. # # To enable them, use e.g # `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' # # The list below may be incomplete, please see the configure script # in the Squid source distribution for the complete list of additional # options. # Note that you probably do not need to worry about these options in most # cases, they are included in case you want to experiment with them. # # --enable-dlmalloc # Compile and use the malloc package from Doug Lea # --enable-gnuregex # Compile and use the supplied GNUregex routines instead of BSD regex # (not recommended). # --enable-xmalloc-statistics # Show malloc statistics in status page # --enable-cachemgr-hostname=some.hostname # Set an explicit hostname in cachemgr.cgi # --enable-truncate # Use truncate() rather than unlink() # --disable-unlinkd # Do not use "unlinkd" # --with-aufs-threads=N_THREADS # Tune the number of worker threads for the aufs object # --with-coss-membuf-size # COSS membuf size (default: 1048576 bytes) # --with-maxfd=N # Override the maximum number of filedescriptors. Useful if you # build as another user who is not privileged to use the amount # of filedescriptors the resulting binary is expected to support. # --enable-ntlm-fail-open # Enable NTLM fail open, where a helper that fails one of the # Authentication steps can allow Squid to still authenticate the user # --enable-x-accelerator-vary # Enable support for the X-Accelerator-Vary HTTP header. Can be used # to indicate variance within an accelerator setup. Typically used # together with other code that adds custom HTTP headers to the # requests. # --enable-forward-log # Enable experimental forward_log directive. # --enable-multicast-miss # Enable experimental multicast notification of cachemisses. PORTNAME= lusca DISTVERSION= r14809 PORTREVISION= 6 CATEGORIES= www MASTER_SITES= ${MASTER_SITE_GOOGLE_CODE} PROJECTHOST= lusca-cache PKGNAMESUFFIX= -head DISTNAME= LUSCA_HEAD-r14809 # EXTRACT_SUFX= .tar.gz -MAINTAINER= adrian@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= HTTP Caching Proxy (Squid Derivative) - Stable Release CONFLICTS= squid-[0-9]* cacheboy* USES= perl5 GNU_CONFIGURE= yes USE_RC_SUBR= squid SQUID_UID?= squid SQUID_GID?= squid MAN8= cachemgr.cgi.8 squid.8 docs= QUICKSTART README.Squid ChangeLog.Cacheboy doc/debug-sections.txt PORTDOCS= ${docs:T} PORTEXAMPLES= passwd.sql SUB_FILES+= pkg-deinstall pkg-install pkg-message SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} OPTIONS_DEFINE= LDAP_AUTH SASL_AUTH KERBEROS_HELPER DELAY_POOLS SNMP CARP SSL \ PINGER DNS_HELPER HTCP VIA_DB CACHE_DIGESTS WCCP WCCPV2 STRICT_HTTP \ IDENT REFERER_LOG USERAGENT_LOG ARP_ACL PF IPFILTER FOLLOW_XFF \ COSS KQUEUE LARGEFILE STACKTRACES TPROXY OPTIONS_DEFAULT= DELAY_POOLS SNMP CARP PINGER COSS LARGEFILE KQUEUE STACKTRACES LDAP_AUTH_DESC= Install LDAP authentication helpers SASL_AUTH_DESC= Install SASL authentication helpers KERBEROS_HELPER_DESC= Install Keberos authentication helper DELAY_POOLS_DESC= Enable delay pools SNMP_DESC= Enable SNMP support CARP_DESC= Enable CARP support SSL_DESC= Enable SSL support for reverse proxies PINGER_DESC= Install the icmp helper DNS_HELPER_DESC= Use the old 'dnsserver' helper HTCP_DESC= Enable HTCP support VIA_DB_DESC= Enable forward/via database CACHE_DIGESTS_DESC= Enable cache digests WCCP_DESC= Enable Web Cache Coordination Prot. v1 WCCPV2_DESC= Enable Web Cache Coordination Prot. v2 STRICT_HTTP_DESC= Be strictly HTTP compliant IDENT_DESC= Enable ident (RFC 931) lookups REFERER_LOG_DESC= Enable Referer-header logging USERAGENT_LOG_DESC= Enable User-Agent-header logging ARP_ACL_DESC= Enable ACLs based on ethernet address PF_DESC= Enable transparent proxying with PF IPFILTER_DESC= Enable transp. proxying with IPFilter FOLLOW_XFF_DESC= Follow X-Forwarded-For headers COSS_DESC= Enable the COSS storage scheme KQUEUE_DESC= Use kqueue(2) instead of poll(2) LARGEFILE_DESC= Support log and cache files >2GB STACKTRACES_DESC= Create backtraces on fatal errors TPROXY_DESC= Enable FreeBSD-current TPROXY support etc_files= squid/cachemgr.conf.default \ squid/mib.txt squid/mime.conf.default \ squid/msntauth.conf.default squid/squid.conf.default \ squid/squid.conf.clean icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ anthony-box2.gif anthony-c.gif anthony-compressed.gif \ anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ anthony-f.gif anthony-image.gif anthony-image2.gif \ anthony-layout.gif anthony-link.gif anthony-movie.gif \ anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ anthony-quill.gif anthony-script.gif anthony-sound.gif \ anthony-tar.gif anthony-tex.gif anthony-text.gif \ anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \ ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT libexec= cachemgr.cgi digest_pw_auth logfile-daemon \ ip_user_check \ msnt_auth ncsa_auth ntlm_auth \ pam_auth smb_auth smb_auth.sh squid_db_auth squid_session \ squid_unix_group wbinfo_group.pl \ ufs_log_build ufs_log_cat ufs_rebuild coss_rebuild .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" libexec+= unlinkd .endif sbin= RunCache squidclient squid coss_newfs ufs_log_dump ufs_newfs CONFIGURE_ARGS= --bindir=${PREFIX}/sbin \ --sbindir=${PREFIX}/sbin \ --datadir=${PREFIX}/etc/squid \ --libexecdir=${PREFIX}/libexec/squid \ --localstatedir=${PREFIX}/squid \ --sysconfdir=${PREFIX}/etc/squid \ --enable-removal-policies="lru heap" \ --disable-linux-netfilter \ --disable-linux-tproxy \ --disable-epoll .include .if ${PORT_OPTIONS:MKERBEROS_HELPER} && ${OSVERSION} >= 800037 BROKEN= does not compile with Heimdal 1.1 in 8.0-CURRENT .endif # Authentication methods and modules: basic_auth= DB NCSA PAM MSNT SMB digest_auth= password external_acl= ip_user session unix_group wbinfo_group MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \ squid_unix_group.8 .if ${PORT_OPTIONS:MLDAP_AUTH} USE_OPENLDAP= yes CFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib MAN8+= squid_ldap_auth.8 squid_ldap_group.8 basic_auth+= LDAP digest_auth+= ldap external_acl+= ldap_group libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group .endif .if ${PORT_OPTIONS:MSASL_AUTH} LIB_DEPENDS+= libsasl2.so:${PORTSDIR}/security/cyrus-sasl2 CFLAGS+= -I${LOCALBASE}/include CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib basic_auth+= SASL libexec+= sasl_auth .endif .if !defined(NO_NIS) && ${PORT_OPTIONS:MNIS} basic_auth+= YP libexec+= yp_auth .endif CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ --enable-basic-auth-helpers="${basic_auth}" \ --enable-digest-auth-helpers="${digest_auth}" \ --enable-external-acl-helpers="${external_acl}" \ --enable-ntlm-auth-helpers="SMB" .if !defined(NO_KERBEROS) && ${PORT_OPTIONS:MKERBEROS} # XXX This currently only works with heimdal from the base system, # see ${FILES_DIR}/patch-helpers_negotiate_auth-squid_kerb_auth_* CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" libexec+= squid_kerb_auth .endif # Storage schemes: storage_schemes= aufs null # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS CONFIGURE_ARGS+= --with-pthreads .if ${PORT_OPTIONS:MCOSS} storage_schemes+= coss sbin+= cossdump .endif CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" # Other options set via 'make config': .if ${PORT_OPTIONS:MDELAY_POOLS} CONFIGURE_ARGS+= --enable-delay-pools .endif .if ${PORT_OPTIONS:MSNMP} CONFIGURE_ARGS+= --enable-snmp .endif .if ! ${PORT_OPTIONS:MCARP} CONFIGURE_ARGS+= --disable-carp .endif .if ${PORT_OPTIONS:MSSL} # we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only # works when it is defined before bsd.port{.pre}.mk is .included. # This makes it currently impossible to combine this macro with OPTIONS to # conditionally include OpenSSL support. .include "${PORTSDIR}/Mk/bsd.openssl.mk" CONFIGURE_ARGS+= --enable-ssl \ --with-openssl="${OPENSSLBASE}" CFLAGS+= -I${OPENSSLINC} LDFLAGS+= -L${OPENSSLLIB} .endif .if ${PORT_OPTIONS:MPINGER} CONFIGURE_ARGS+= --enable-icmp libexec+= pinger .endif .if ${PORT_OPTIONS:MDNS_HELPER} CONFIGURE_ARGS+= --disable-internal-dns libexec+= dnsserver .endif .if ${PORT_OPTIONS:MHTCP} CONFIGURE_ARGS+= --enable-htcp .endif .if ${PORT_OPTIONS:MVIA_DB} CONFIGURE_ARGS+= --enable-forw-via-db .endif .if ${PORT_OPTIONS:MCACHE_DIGESTS} CONFIGURE_ARGS+= --enable-cache-digests .endif .if ! ${PORT_OPTIONS:MWCCP} CONFIGURE_ARGS+= --disable-wccp .endif .if ${PORT_OPTIONS:MWCCPV2} CONFIGURE_ARGS+= --enable-wccpv2 .endif .if ${PORT_OPTIONS:MSTRICT_HTTP} CONFIGURE_ARGS+= --disable-http-violations .endif .if ! ${PORT_OPTIONS:MIDENT} CONFIGURE_ARGS+= --disable-ident-lookups .endif .if ${PORT_OPTIONS:MREFERER_LOG} CONFIGURE_ARGS+= --enable-referer-log .endif .if ${PORT_OPTIONS:MUSERAGENT_LOG} CONFIGURE_ARGS+= --enable-useragent-log .endif .if ${PORT_OPTIONS:MARP_ACL} CONFIGURE_ARGS+= --enable-arp-acl .endif .if ${PORT_OPTIONS:MPF} CONFIGURE_ARGS+= --enable-pf-transparent .endif .if ${PORT_OPTIONS:MIPFILTER} CONFIGURE_ARGS+= --enable-ipf-transparent .endif .if ${PORT_OPTIONS:MFOLLOW_XFF} CONFIGURE_ARGS+= --enable-follow-x-forwarded-for .endif .if ! ${PORT_OPTIONS:MKQUEUE} CONFIGURE_ARGS+= --disable-kqueue .endif .if ${PORT_OPTIONS:MLARGEFILE} CONFIGURE_ARGS+= --with-large-files --enable-large-cache-files .endif .if ${PORT_OPTIONS:MSTACKTRACES} CONFIGURE_ARGS+= --enable-stacktraces CFLAGS+= -g STRIP= .endif .if ${PORT_OPTIONS:MTPROXY} CONFIGURE_ARGS+= --enable-freebsd-tproxy .endif # Languages: # # If you do not define SQUID_LANGUAGES yourself, all available language files # will be installed; the default language will be English. SQUID_LANGUAGES?= Armenian Azerbaijani Bulgarian Catalan Czech Danish \ Dutch English Estonian Finnish French German Greek \ Hebrew Hungarian Italian Japanese Korean Lithuanian \ Polish Portuguese Romanian Russian-1251 Russian-koi8-r \ Serbian Simplify_Chinese Slovak Spanish Swedish \ Traditional_Chinese Turkish SQUID_DEFAULT_LANG?= English CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ --enable-default-err-language=${SQUID_DEFAULT_LANG} # Finally, add additional user specified configuration options: CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} PLIST_DIRS= etc/squid/icons libexec/squid PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} .for d in ${SQUID_LANGUAGES} PLIST_DIRS+= etc/squid/errors/${d} PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} .endfor PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid post-patch: @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ -e 's|%%SQUID_GID%%|${SQUID_GID}|g' \ -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/src/cf.data.pre @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh pre-install: # Prevent installation of .orig files by deleting them. @${FIND} ${WRKSRC} -name '*.bak' -delete @${FIND} ${WRKSRC} -name '*.orig' -delete pre-su-install: @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL post-install: .if ${PORT_OPTIONS:MEXAMPLES} @${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} .endif .if ${PORT_OPTIONS:MPINGER} ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger .endif .if ${PORT_OPTIONS:MDOCS} @${MKDIR} ${DOCSDIR} cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} .endif @${SETENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" @${ECHO_CMD} "" @${CAT} ${PKGMESSAGE} @${ECHO_CMD} "" .include Index: head/www/mod_auth_form/Makefile =================================================================== --- head/www/mod_auth_form/Makefile (revision 362827) +++ head/www/mod_auth_form/Makefile (revision 362828) @@ -1,38 +1,38 @@ # Created by: Tommy Scheunemann # $FreeBSD$ PORTNAME= mod_auth_form PORTVERSION= 2.05 PORTREVISION= 3 CATEGORIES= www MASTER_SITES= http://comp.uark.edu/~ajarthu/mod_auth_form/download.php?download=v2_05/ PKGNAMEPREFIX= ${APACHE_PKGNAMEPREFIX} DISTNAME= ${PORTNAME}-${PORTVERSION}-src -MAINTAINER= net@arrishq.net +MAINTAINER= ports@FreeBSD.org COMMENT= MySQL based form authentication module for Apache 2.x WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION} USE_MYSQL= yes USE_APACHE= 22 GNU_CONFIGURE= yes CONFIGURE_ENV= MYSQL_PREFIX="${LOCALBASE}" APACHE2_PREFIX="${LOCALBASE}" \ APACHE2_INCLUDE="${LOCALBASE}/include/apache${APACHE_VERSION}" \ APR1_INCLUDE="${LOCALBASE}/include/apache2" CFLAGS+= -I${LOCALBASE}/include PORTDOCS= AUTHORS NEWS README NO_STAGE= yes post-install: ${ECHO} ${APACHE_VERSION} .if !defined(NOPORTDOCS) @${INSTALL} -d ${DOCSDIR} @cd ${WRKSRC} && ${INSTALL_DATA} ${PORTDOCS} ${DOCSDIR} .endif .include Index: head/www/mod_auth_mellon/Makefile =================================================================== --- head/www/mod_auth_mellon/Makefile (revision 362827) +++ head/www/mod_auth_mellon/Makefile (revision 362828) @@ -1,29 +1,29 @@ # Created by: Tom Judge # $FreeBSD$ PORTNAME= mod_auth_mellon PORTVERSION= 0.7.0 PORTREVISION= 1 CATEGORIES= www MASTER_SITES= http://modmellon.googlecode.com/files/ DIST_SUBDIR= apache2 -MAINTAINER= tj@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Apache auth module for identifying SSO users LICENSE= GPLv2 LIB_DEPENDS= liblasso.so:${PORTSDIR}/security/lasso \ libcurl.so:${PORTSDIR}/ftp/curl USES= pkgconfig GNU_CONFIGURE= yes CONFIGURE_ARGS+= --with-apxs2=${APXS} CONFIGURE_ENV+= OPENSSL_CFLAGS="-Wall" OPENSSL_LIBS="-lssl" USE_APACHE= 22+ PLIST_FILES= ${APACHEMODDIR}/mod_auth_mellon.so NO_STAGE= yes .include Index: head/www/snownews/Makefile =================================================================== --- head/www/snownews/Makefile (revision 362827) +++ head/www/snownews/Makefile (revision 362828) @@ -1,57 +1,57 @@ # Created by: Cheng-Lung Sung # $FreeBSD$ PORTNAME= snownews PORTVERSION= 1.5.12 PORTREVISION= 2 CATEGORIES= www MASTER_SITES= http://kiza.kcore.de/media/software/snownews/ -MAINTAINER= clsung@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= A text mode RSS newsreader USES= gmake iconv perl5 USE_PERL5= build USE_GNOME= libxml2 HAS_CONFIGURE= yes OPTIONS_DEFINE= OPML NLS OPTIONS_DEFAULT= OPML OPML_DESC= Outline Processor Markup Support NO_STAGE= yes .include .if ${PORT_OPTIONS:MNLS} USES+= gettext PLIST_SUB+= NLS="" .else PLIST_SUB+= NLS="@comment " .endif .if ! ${PORT_OPTIONS:MOPML} EXTRA_PATCHES= ${FILESDIR}/extra-patch-Makefile PLIST_SUB+= OPML="@comment " .else RUN_DEPENDS= p5-XML-LibXML>=0:${PORTSDIR}/textproc/p5-XML-LibXML PLIST_SUB+= OPML="" # opml2snow only have "" manpage _MANPAGES+= ${PREFIX}/man/man1/opml2snow.1 .endif MAN1= snownews.1 MANLANG= "" de nl fr it ru_RU.KOI8-R post-patch: @${REINPLACE_CMD} -e 's|#!/usr/local/bin/perl|#!${PERL}|g' ${WRKSRC}/configure @${REINPLACE_CMD} -e 's|ncurses|ncursesw|g' ${WRKSRC}/configure @${REINPLACE_CMD} -e 's|-liconv|${ICONV_LIB}|' ${WRKSRC}/configure @${REINPLACE_CMD} -e 's|gcc|${CC}|' ${WRKSRC}/Makefile @${REINPLACE_CMD} -e 's|make|${MAKE_CMD}|' ${WRKSRC}/Makefile @${REINPLACE_CMD} -e 's|share/man|man|' ${WRKSRC}/Makefile .if ! ${PORT_OPTIONS:MNLS} ${REINPLACE_CMD} -e 's/ install-locales / /g' ${WRKSRC}/Makefile ${REINPLACE_CMD} -e 's/ locales$$//g' ${WRKSRC}/Makefile .endif .include Index: head/x11/xscreensaver-gnome/Makefile =================================================================== --- head/x11/xscreensaver-gnome/Makefile (revision 362827) +++ head/x11/xscreensaver-gnome/Makefile (revision 362828) @@ -1,150 +1,150 @@ # Created by: Ade Lovett # $FreeBSD$ # $MCom: ports/x11/xscreensaver-gnome/Makefile,v 1.5 2007/08/15 18:29:16 mezz Exp $ PORTNAME?= xscreensaver-gnome PORTVERSION= 5.12 PORTREVISION?= 1 CATEGORIES= x11 gnome MASTER_SITES= http://www.jwz.org/xscreensaver/ DISTNAME= xscreensaver-${PORTVERSION} -MAINTAINER= gnome@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Save your screen while you entertain your cat (for GNOME users) LIB_DEPENDS= libgle.so:${PORTSDIR}/graphics/gle \ libjpeg.so:${PORTSDIR}/graphics/jpeg #CONFLICTS?= xscreensaver-[0-9]* xscreensaver-gnome-hacks-[0-9]* USE_XORG= x11 xpm USE_GL= gl USE_PERL5= run USE_GNOME= gnomehier libglade2 gnomehack USES= dos2unix gettext gmake perl5 pkgconfig GNU_CONFIGURE= yes CONFIGURE_ARGS= --with-gtk --with-gl --with-gle --with-pixbuf --with-xpm \ --with-jpeg=${LOCALBASE} --with-xshm-ext --with-xdbe-ext \ --with-hackdir=${PREFIX}/bin/xscreensaver-hacks \ --with-configdir=${PREFIX}/share/xscreensaver/config \ --with-dpms-ext --with-xinerama-ext --with-xf86vmode-ext \ --with-xf86gamma-ext --with-randr-ext --enable-locking CPPFLAGS+= -I${LOCALBASE}/include LIBS+= -L${LOCALBASE}/lib -lintl OPTIONS_DEFINE= PAM KEYRING ALL_FORTUNES SETUID_HACKS OPTIONS_DEFAULT= PAM KEYRING KEYRING_DESC= GnomeKeyring integration (needs PAM) ALL_FORTUNES_DESC= Support for all fortunes SETUID_HACKS_DESC= Install sonar hack suid so it can ping SUB_FILES+= xscreensaver.pam MAN1?= xscreensaver-command.1 xscreensaver-demo.1 \ xscreensaver-getimage-file.1 xscreensaver-getimage-video.1 \ xscreensaver-getimage.1 xscreensaver-text.1 xscreensaver.1 MAN6?= anemone.6 anemotaxis.6 antinspect.6 antmaze.6 antspotlight.6 \ apollonian.6 apple2.6 atlantis.6 attraction.6 atunnel.6 barcode.6 \ blaster.6 blinkbox.6 blitspin.6 blocktube.6 boing.6 bouboule.6 \ bouncingcow.6 boxed.6 boxfit.6 braid.6 bsod.6 bubble3d.6 \ bumps.6 cage.6 carousel.6 ccurve.6 celtic.6 circuit.6 cloudlife.6 \ compass.6 coral.6 crackberg.6 crystal.6 cube21.6 \ cubenetic.6 cubestorm.6 cynosure.6 dangerball.6 decayscreen.6 deco.6 \ deluxe.6 demon.6 discrete.6 distort.6 drift.6 endgame.6 engine.6 \ epicycle.6 eruption.6 euler2d.6 extrusion.6 fadeplot.6 fiberlamp.6 \ fireworkx.6 flame.6 flipflop.6 flipscreen3d.6 fliptext.6 flow.6 \ fluidballs.6 flurry.6 flyingtoasters.6 fontglide.6 \ fuzzyflakes.6 galaxy.6 gears.6 gflux.6 glblur.6 gleidescope.6 \ glhanoi.6 glknots.6 glmatrix.6 glplanet.6 glschool.6 \ glslideshow.6 glsnake.6 gltext.6 goop.6 grav.6 greynetic.6 halftone.6 \ halo.6 helix.6 hopalong.6 hypertorus.6 ifs.6 \ imsmap.6 interaggregate.6 interference.6 intermomentary.6 jigglypuff.6 \ jigsaw.6 juggler3d.6 julia.6 kaleidescope.6 klein.6 kumppa.6 \ lament.6 lavalite.6 ljlatest.6 \ loop.6 maze.6 memscroller.6 menger.6 metaballs.6 mirrorblob.6 \ moebius.6 moire.6 moire2.6 molecule.6 morph3d.6 mountain.6 \ munch.6 nerverot.6 noof.6 noseguy.6 pacman.6 pedal.6 penetrate.6 \ penrose.6 petri.6 phosphor.6 photopile.6 piecewise.6 pinion.6 \ pipes.6 polyhedra.6 polyominoes.6 polytopes.6 pong.6 providence.6 \ pulsar.6 pyro.6 qix.6 queens.6 rd-bomb.6 ripples.6 rocks.6 \ rorschach.6 rotzoomer.6 rubik.6 sballs.6 shadebobs.6 sierpinski.6 \ sierpinski3d.6 slidescreen.6 slip.6 sonar.6 speedmine.6 spheremonics.6 \ spotlight.6 sproingies.6 squiral.6 stairs.6 starfish.6 \ starwars.6 stonerview.6 strange.6 substrate.6 superquadrics.6 \ swirl.6 tangram.6 thornbird.6 timetunnel.6 topblock.6 \ triangle.6 truchet.6 twang.6 vermiculate.6 vidwhacker.6 \ wander.6 webcollage.6 whirlwindwarp.6 wormhole.6 \ xanalogtv.6 xflame.6 xjack.6 xlyap.6 xmatrix.6 xrayswarm.6 \ xspirograph.6 zoom.6 cwaves.6 glcells.6 voronoi.6 \ abstractile.6 moebiusgears.6 lockward.6 cubicgrid.6 hypnowheel.6 \ lcdscrub.6 skytentacles.6 rubikblocks.6 surfaces.6 \ xscreensaver-gl-helper.6 NO_STAGE= yes .include .if ${PORT_OPTIONS:MALL_FORTUNES} CONFIGURE_ARGS+= --with-fortune="/usr/games/fortune -sa" .endif .if ${PORT_OPTIONS:MPAM} || ${PORT_OPTIONS:MKEYRING} CONFIGURE_ARGS+= --with-pam PLIST_SUB+= PAM="" .else CONFIGURE_ARGS+= --without-pam PLIST_SUB+= PAM="@comment " .endif .if ${PORT_OPTIONS:MKEYRING} SUB_LIST+= PAM_KEYRING= RUN_DEPENDS+= ${LOCALBASE}/lib/pam_gnome_keyring.so:${PORTSDIR}/security/gnome-keyring .else SUB_LIST+= PAM_KEYRING=\# .endif .if ${PORT_OPTIONS:MSETUID_HACKS} CONFIGURE_ARGS+= --with-setuid-hacks .endif .if ${ARCH} == "amd64" CFLAGS+= -O0 .endif DOS2UNIX_FILES= hacks/glx/topblock.c post-patch: @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g ; \ s|malloc.h|stdlib.h|g ; \ s|/usr/X11R6|${LOCALBASE}|g' \ ${WRKSRC}/configure .if ${PORT_OPTIONS:MPAM} .for f in driver/passwd-pam.c driver/xscreensaver.man @${REINPLACE_CMD} -e 's|/etc/pam.d|${PREFIX}/etc/pam.d|g' \ ${WRKSRC}/${f} .endfor .else @${REINPLACE_CMD} -e 's|install-xml install-pam|install-xml|' \ ${WRKSRC}/driver/Makefile.in .endif pre-build: @(cd ${WRKSRC}/hacks && ./m6502.sh m6502.h images/m6502/*.asm) @(cd ${WRKSRC}/hacks/glx && ./molecules.sh molecules.h ../images/molecules/*.pdb) pre-install: .if ${PORT_OPTIONS:MPAM} @${CP} ${WRKDIR}/xscreensaver.pam ${WRKSRC}/driver/xscreensaver.pam .endif .if !target(post-install-slave) post-install-slave: @${DO_NADA} .endif post-install: post-install-slave @(if test -x ${PREFIX}/bin/xscreensaver-hacks/webcollage-helper; then \ ${ECHO} "bin/xscreensaver-hacks/webcollage-helper" | \ ${CAT} - ${TMPPLIST} > ${TMPPLIST}.cat && \ ${MV} ${TMPPLIST}.cat ${TMPPLIST}; fi) .include Index: head/x11/xscreensaver-gnome-hacks/Makefile =================================================================== --- head/x11/xscreensaver-gnome-hacks/Makefile (revision 362827) +++ head/x11/xscreensaver-gnome-hacks/Makefile (revision 362828) @@ -1,42 +1,42 @@ # Created by: Joe Marcus Clarke # $FreeBSD$ PORTNAME= xscreensaver-gnome-hacks PORTREVISION= 1 -MAINTAINER= gnome@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Screensaver modules for use with xscreensaver and gnome-screensaver MASTERDIR= ${.CURDIR}/../xscreensaver-gnome DESCR= ${.CURDIR}/pkg-descr PLIST= ${.CURDIR}/pkg-plist CONFLICTS= xscreensaver-[0-9]* xscreensaver-gnome-[0-9]* OPTIONS_DEFINE= ALL_FORTUNES ALL_FORTUNES_DESC= Enable support for all fortunes EXTRA_PATCHES= ${FILESDIR}/extra-patch-nodriver SS_SCRIPTS= xscreensaver-getimage-desktop xscreensaver-getimage-file \ xscreensaver-getimage xscreensaver-getimage-video \ xscreensaver-text MAN1= xscreensaver-getimage-desktop.1 xscreensaver-getimage-file.1 \ xscreensaver-getimage-video.1 xscreensaver-getimage.1 \ xscreensaver-text.1 NO_STAGE= yes post-build: @cd ${WRKSRC}/driver && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} \ Makefile ${MAKE_ARGS} xscreensaver-getimage post-install-slave: ${MKDIR} ${PREFIX}/bin .for sf in ${SS_SCRIPTS} ${INSTALL_SCRIPT} ${WRKSRC}/driver/${sf} ${PREFIX}/bin ${INSTALL_MAN} ${WRKSRC}/driver/${sf}.man \ ${MAN1PREFIX}/man/man1/${sf}.1 .endfor .include "${MASTERDIR}/Makefile" Index: head/x11-themes/icons-buuf/Makefile =================================================================== --- head/x11-themes/icons-buuf/Makefile (revision 362827) +++ head/x11-themes/icons-buuf/Makefile (revision 362828) @@ -1,27 +1,27 @@ # Created by: Phillip Neumann # $FreeBSD$ PORTNAME= icons-buuf PORTVERSION= 1.6r2 PORTREVISION= 6 CATEGORIES= x11-themes MASTER_SITES= http://ic1.deviantart.com/fs12/f/2006/266/9/0/ DISTNAME= Buuf_1.6-r2 EXTRACT_SUFX= _tar_bz2 -MAINTAINER= pneumann@gmail.com +MAINTAINER= ports@FreeBSD.org COMMENT= A cool set of icons for the most common usage NO_BUILD= yes USE_BZIP2= yes WRKSRC= ${WRKDIR}/Buuf USE_GNOME= gtk20 INSTALLS_ICONS= yes NO_STAGE= yes do-install: @${RM} ${WRKSRC}/128x128/status/sunny.png @${MKDIR} ${PREFIX}/share/icons/Buuf @${CP} -rip ${WRKSRC} ${PREFIX}/share/icons/ .include Index: head/x11-toolkits/py-kiwi/Makefile =================================================================== --- head/x11-toolkits/py-kiwi/Makefile (revision 362827) +++ head/x11-toolkits/py-kiwi/Makefile (revision 362828) @@ -1,55 +1,54 @@ # Created by: Nicola Vitale # $FreeBSD$ PORTNAME= kiwi PORTVERSION= 1.9.29 PORTREVISION= 1 CATEGORIES= x11-toolkits python MASTER_SITES= http://download.gnome.org/sources/${PORTNAME}/1.9/ \ http://nivi.interfree.it/distfiles/${PORTNAME}/ PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} -MAINTAINER= nivit@FreeBSD.org -COMMENT= A framework and a set of enhanced widgets based on PyGTK +MAINTAINER= ports@FreeBSD.org +COMMENT= Framework and a set of enhanced widgets based on PyGTK BUILD_DEPENDS= pygtk-codegen-2.0:${PORTSDIR}/x11-toolkits/py-gtk2 RUN_DEPENDS= pygtk-codegen-2.0:${PORTSDIR}/x11-toolkits/py-gtk2 -USES= gettext +USES= gettext tar:xz USE_GNOME= libglade2 USE_PYTHON= yes USE_PYDISTUTILS= yes -USE_XZ= yes DOCSDIR= ${PREFIX}/share/doc/${PYTHON_PKGNAMEPREFIX}${PORTNAME} EXAMPLESDIR= ${PREFIX}/share/examples/${PYTHON_PKGNAMEPREFIX}${PORTNAME} OPTIONS_DEFINE= DOCS EXAMPLES NO_STAGE= yes .include post-install: .if ${PORT_OPTIONS:MDOCS} cd ${WRKSRC}/doc && ${COPYTREE_SHARE} . ${DOCSDIR} .endif .if ${PORT_OPTIONS:MEXAMPLES} cd ${WRKSRC}/examples && ${COPYTREE_SHARE} . ${EXAMPLESDIR} .endif .include .if defined (WITH_ZOPEINTERFACE) RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}zope.interface>=3.3.0:${PORTSDIR}/devel/py-zope.interface .endif .if defined (WITH_PYGOBJECT) RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}gobject>=2.14.2_2:${PORTSDIR}/devel/py-gobject .endif .if defined (WITH_PYSQLOBJECT) RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}sqlobject>=0.10.0_1:${PORTSDIR}/databases/py-sqlobject .endif .include