diff --git a/share/man/man4/ocs_fc.4 b/share/man/man4/ocs_fc.4
index a2f13c483930..371a3bde83dd 100644
--- a/share/man/man4/ocs_fc.4
+++ b/share/man/man4/ocs_fc.4
@@ -1,194 +1,196 @@
 .\" Copyright (c) 2017 Broadcom. All rights reserved.
 .\" The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
 .\"
 .\" Redistribution and use in source and binary forms, with or without
 .\" modification, are permitted provided that the following conditions are met:
 .\"
 .\" 1. Redistributions of source code must retain the above copyright notice,
 .\"    this list of conditions and the following disclaimer.
 .\"
 .\" 2. Redistributions in binary form must reproduce the above copyright notice,
 .\"    this list of conditions and the following disclaimer in the documentation
 .\"    and/or other materials provided with the distribution.
 .\"
 .\" 3. Neither the name of the copyright holder nor the names of its contributors
 .\"    may be used to endorse or promote products derived from this software
 .\"    without specific prior written permission.
 .\"
 .\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 .\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 .\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 .\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
 .\" $FreeBSD$
 .\"
 .Dd March 30, 2018
 .Dt OCS_FC 4
 .Os
 .Sh NAME
 .Nm ocs_fc
 .Nd "Device driver for Emulex Fibre Channel Host Adapters"
 .Sh SYNOPSIS
 To compile this driver into the kernel, add this line to the
 kernel configuration file:
 .Bd -ragged -offset indent
 .Cd "device ocs_fc"
 .Ed
 .Pp
 To load the driver as a module at boot, add this line to
 .Xr loader.conf 5 :
 .Bd -literal -offset indent
 ocs_fc_load="YES"
 .Ed
 .Sh DESCRIPTION
 The
 .Nm
 driver provides access to Fibre Channel SCSI devices.
 .Pp
 The
 .Nm
 driver supports initiator and target modes.
 Support is available for Arbitrated loops, Point-to-Point,
 and Fabric connections.
 FC-Tape is highly recommended for connections to tape drives that support
 it.
 FC-Tape includes four elements from the T-10 FCP-4 specification:
 .Bl -bullet -offset indent
 .It
 Precise Delivery of Commands
 .It
 Confirmed Completion of FCP I/O Operations
 .It
 Retransmission of Unsuccessfully Transmitted IUs
 .It
 Task Retry Identification
 .El
 .Pp
 Together these features allow for link level error recovery with tape
 devices.
 Without link level error recovery, an initiator cannot, for instance, tell whether a tape write
 command that has timed out resulted in all, part, or none of the data going to
 the tape drive.
 FC-Tape is automatically enabled when both the controller and target support it.
-
 .Sh HARDWARE
 The
 .Nm
 driver supports these Fibre Channel adapters:
 .Bl -tag -width xxxxxx -offset indent
 .It Emulex 16/8G FC GEN 5 HBAS
 .Bd -literal -offset indent
 LPe15004 FC Host Bus Adapters
 LPe160XX FC Host Bus Adapters
 .Ed
 .It Emulex 32/16G FC GEN 6 HBAS
 .Bd -literal -offset indent
 LPe3100X FC Host Bus Adapters
 LPe3200X FC Host Bus Adapters
 .Ed
+.It Emulex 64/32G FC GEN 7 HBAS
+.Bd -literal -offset indent
+LPe3500X FC Host Bus Adapters
+.Ed
 .El
 .Sh UPDATING FIRMWARE
 Adapter firmware updates are persistent.
 .Pp
 Firmware can be updated by following these steps:
 .Bl -enum
 .It
 Copy this code to a
 .Pa Makefile :
 .Bd -literal -offset indent
 KMOD=ocsflash
 FIRMWS=imagename.grp:ocsflash
 \&.include <bsd.kmod.mk>
 .Ed
 .It
 Replace
 .Pa imagename
 with the name of the GRP file.
 .It
 Copy the
 .Pa Makefile
 and GRP file to a local directory
 .It
 Execute
 .Cm make
 and copy the generated
 .Pa ocsflash.ko
 file to
 .Pa /lib/modules
 .It
 .Cm sysctl dev.ocs_fc.<N>.fw_upgrade=ocsflash
 .It
 Check kernel messages regarding status of the operation
 .It
 Reboot the machine
 .El
-.Pp
 .Sh BOOT OPTIONS
 Options are controlled by setting values in
 .Pa /boot/device.hints .
 .Pp
 They are:
 .Bl -tag -width indent
 .It Va hint.ocs_fc.N.initiator
 Enable initiator functionality.
 Default 1 (enabled), 0 to disable.
 .It Va hint.ocs_fc.N.target
 Enable target functionality.
 Default 1 (enabled), 0 to disable.
 .It Va hint.ocs_fc.N.topology
 Topology: 0 for Auto, 1 for NPort only, 2 for Loop only.
 .It Va hint.ocs_fc.N.speed
 Link speed in megabits per second.
 Possible values include:
 0 Auto-speed negotiation (default), 4000 (4GFC), 8000 (8GFC), 16000 (16GFC).
 .El
 .Sh SYSCTL OPTIONS
 .Bl -tag -width indent
 .It Va dev.ocs_fc.N.port_state
 Port state (read/write).
 Valid values are
 .Li online
 and
 .Li offline .
 .It Va dev.ocs_fc.N.wwpn
 World Wide Port Name (read/write).
 .It Va dev.ocs_fc.N.wwnn
 World Wide Node Name (read/write).
 .It Va dev.ocs_fc.N.fwrev
 Firmware revision (read-only).
 .It Va dev.ocs_fc.N.sn
 Adapter serial number (read-only).
 .It Va dev.ocs_fc.N.configured_speed
 Configured Port Speed (read/write).
 Valid values are:
 0 Auto-speed negotiation (default), 4000 (4GFC), 8000 (8GFC), 16000 (16GFC).
 .It Va dev.ocs_fc.N.configured_topology
 Configured Port Topology (read/write).
 Valid values are:
 0-Auto; 1-NPort; 2-Loop.
 .It Va dev.ocs_fc.N.current_speed
 Current Port Speed (read-only).
 .It Va dev.ocs_fc.N.current_topology
 Current Port Topology (read-only).
 .El
 .Sh SUPPORT
 For general information and support,
 go to the Broadcom website at:
 .Pa http://www.broadcom.com/
 or E-Mail at
-.Pa ocs-driver-team.pdl@broadcom.com.
+.Pa ocs-driver-team.pdl@broadcom.com .
 .Sh SEE ALSO
 .Xr ifconfig 8
 .Sh AUTHORS
 .An -nosplit
 The
 .Nm
 driver was written by
-.An Broadcom.
+.An Broadcom .