diff --git a/usr.sbin/mpsutil/Makefile b/usr.sbin/mpsutil/Makefile index dd99f5814565..0bc981366650 100644 --- a/usr.sbin/mpsutil/Makefile +++ b/usr.sbin/mpsutil/Makefile @@ -1,22 +1,22 @@ # $FreeBSD$ PROG= mpsutil -SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_show.c mps_slot.c mpsutil.c +SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_set.c mps_show.c mps_slot.c mpsutil.c MAN= mpsutil.8 WARNS?= 3 #LIBADD= cam util LINKS= ${BINDIR}/mpsutil ${BINDIR}/mprutil MLINKS= mpsutil.8 mprutil.8 CFLAGS+= -I${SRCTOP}/sys -I. -DUSE_MPT_IOCTLS # Avoid dirdep dependency on libutil CFLAGS+= -I${SRCTOP}/lib/libutil # Here be dragons .ifdef DEBUG CFLAGS+= -DDEBUG .endif .include diff --git a/usr.sbin/mpsutil/mps_set.c b/usr.sbin/mpsutil/mps_set.c new file mode 100644 index 000000000000..91e4d23ab78d --- /dev/null +++ b/usr.sbin/mpsutil/mps_set.c @@ -0,0 +1,129 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2021 Daniel Austin + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +__RCSID("$FreeBSD$"); + +#include +#include +#include +#include +#include +#include +#include +#include +#include "mpsutil.h" + +static int set_ncq(int ac, char **av); + +MPS_TABLE(top, set); + +static int +set_ncq(int ac, char **av) +{ + MPI2_CONFIG_PAGE_HEADER header; + MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1; + MPI2_CONFIG_REQUEST req; + MPI2_CONFIG_REPLY reply; + int error, fd; + + bzero(&req, sizeof(req)); + bzero(&header, sizeof(header)); + bzero(&reply, sizeof(reply)); + + fd = mps_open(mps_unit); + if (fd < 0) { + error = errno; + warn("mps_open"); + return (error); + } + + error = mps_read_config_page_header(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, + &header, NULL); + if (error) { + error = errno; + warn("Failed to get IOUNIT page 1 header"); + return (error); + } + + iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL); + if (iounit1 == NULL) { + error = errno; + warn("Failed to get IOUNIT page 1 info"); + return (error); + } + + if (ac == 1) { + /* just show current setting */ + printf("SATA Native Command Queueing is currently: %s\n", + ((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ? + "ENABLED" : "DISABLED"); + } else if (ac == 2) { + if (!strcasecmp(av[1], "enable") || !strcmp(av[1], "1")) { + iounit1->Flags &= ~MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE; + } else if (!strcasecmp(av[1], "disable") || !strcmp(av[1], "0")) { + iounit1->Flags |= MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE; + } else { + free(iounit1); + error = EINVAL; + warn("set ncq: Only 'enable' and 'disable' allowed."); + return (EINVAL); + } + req.Function = MPI2_FUNCTION_CONFIG; + req.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + req.ExtPageLength = 0; + req.ExtPageType = 0; + req.Header = header; + req.PageAddress = 0; + if (mps_pass_command(fd, &req, sizeof(req) - sizeof(req.PageBufferSGE), &reply, sizeof(reply), + NULL, 0, iounit1, sizeof(iounit1), 30) != 0) { + free(iounit1); + error = errno; + warn("Failed to update config page"); + return (error); + } + if (!IOC_STATUS_SUCCESS(reply.IOCStatus)) { + free(iounit1); + error = errno; + warn("%s", mps_ioc_status(reply.IOCStatus)); + return (error); + } + printf("NCQ setting accepted. It may not take effect until the controller is reset.\n"); + } else { + free(iounit1); + errno = EINVAL; + warn("set ncq: too many arguments"); + return (EINVAL); + } + free(iounit1); + + close(fd); + return (0); +} + +MPS_COMMAND(set, ncq, set_ncq, "[enable|disable]", "set SATA NCQ function") + diff --git a/usr.sbin/mpsutil/mps_show.c b/usr.sbin/mpsutil/mps_show.c index 620bb5e27f89..7c2596497818 100644 --- a/usr.sbin/mpsutil/mps_show.c +++ b/usr.sbin/mpsutil/mps_show.c @@ -1,820 +1,854 @@ /*- * Copyright (c) 2015 Netflix, Inc. * Written by: Scott Long * * Copyright (c) 2008 Yahoo!, Inc. * All rights reserved. * Written by: John Baldwin * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __RCSID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include "mpsutil.h" static char * get_device_speed(uint8_t rate); static char * get_device_type(uint32_t di); static int show_all(int ac, char **av); static int show_devices(int ac, char **av); static int show_enclosures(int ac, char **av); static int show_expanders(int ac, char **av); MPS_TABLE(top, show); #define STANDALONE_STATE "ONLINE" static int show_adapter(int ac, char **av) { + const char* pcie_speed[] = { "2.5", "5.0", "8.0" }; + const char* temp_units[] = { "", "F", "C" }; + const char* ioc_speeds[] = { "", "Full", "Half", "Quarter", "Eighth" }; + MPI2_CONFIG_PAGE_SASIOUNIT_0 *sas0; MPI2_CONFIG_PAGE_SASIOUNIT_1 *sas1; MPI2_SAS_IO_UNIT0_PHY_DATA *phy0; MPI2_SAS_IO_UNIT1_PHY_DATA *phy1; MPI2_CONFIG_PAGE_MAN_0 *man0; MPI2_CONFIG_PAGE_BIOS_3 *bios3; + MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1; + MPI2_CONFIG_PAGE_IO_UNIT_7 *iounit7; MPI2_IOC_FACTS_REPLY *facts; U16 IOCStatus; char *speed, *minspeed, *maxspeed, *isdisabled, *type; char devhandle[5], ctrlhandle[5]; int error, fd, v, i; if (ac != 1) { warnx("show adapter: extra arguments"); return (EINVAL); } fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } man0 = mps_read_man_page(fd, 0, NULL); if (man0 == NULL) { error = errno; warn("Failed to get controller info"); return (error); } if (man0->Header.PageLength < sizeof(*man0) / 4) { warnx("Invalid controller info"); return (EINVAL); } printf("mp%s%d Adapter:\n", is_mps ? "s": "r", mps_unit); printf(" Board Name: %.16s\n", man0->BoardName); printf(" Board Assembly: %.16s\n", man0->BoardAssembly); printf(" Chip Name: %.16s\n", man0->ChipName); printf(" Chip Revision: %.16s\n", man0->ChipRevision); free(man0); bios3 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_BIOS, 3, 0, NULL); if (bios3 == NULL) { error = errno; warn("Failed to get BIOS page 3 info"); return (error); } v = le32toh(bios3->BiosVersion); printf(" BIOS Revision: %d.%02d.%02d.%02d\n", ((v & 0xff000000) >> 24), ((v &0xff0000) >> 16), ((v & 0xff00) >> 8), (v & 0xff)); free(bios3); if ((facts = mps_get_iocfacts(fd)) == NULL) { printf("could not get controller IOCFacts\n"); close(fd); return (errno); } v = facts->FWVersion.Word; printf("Firmware Revision: %d.%02d.%02d.%02d\n", ((v & 0xff000000) >> 24), ((v &0xff0000) >> 16), ((v & 0xff00) >> 8), (v & 0xff)); printf(" Integrated RAID: %s\n", (facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) ? "yes" : "no"); free(facts); + iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL); + if (iounit1 == NULL) { + error = errno; + warn("Failed to get IOUNIT page 1 info"); + return (error); + } + printf(" SATA NCQ: %s\n", + ((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ? + "ENABLED" : "DISABLED"); + free(iounit1); + + iounit7 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 7, 0, NULL); + if (iounit7 == NULL) { + error = errno; + warn("Failed to get IOUNIT page 7 info"); + return (error); + } + printf(" PCIe Width/Speed: x%d (%s GB/sec)\n", iounit7->PCIeWidth, + pcie_speed[iounit7->PCIeSpeed]); + printf(" IOC Speed: %s\n", ioc_speeds[iounit7->IOCSpeed]); + printf(" Temperature: "); + if (iounit7->IOCTemperatureUnits == MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT) + printf("Unknown/Unsupported\n"); + else + printf("%d %s\n", iounit7->IOCTemperature, + temp_units[iounit7->IOCTemperatureUnits]); + free(iounit7); + fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } sas0 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT, MPI2_SASIOUNITPAGE0_PAGEVERSION, 0, 0, &IOCStatus); if (sas0 == NULL) { error = errno; warn("Error retrieving SAS IO Unit page %d", IOCStatus); free(sas0); close(fd); return (error); } sas1 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT, MPI2_SASIOUNITPAGE1_PAGEVERSION, 1, 0, &IOCStatus); if (sas1 == NULL) { error = errno; warn("Error retrieving SAS IO Unit page %d", IOCStatus); free(sas0); close(fd); return (error); } printf("\n"); printf("%-8s%-12s%-11s%-10s%-8s%-7s%-7s%s\n", "PhyNum", "CtlrHandle", "DevHandle", "Disabled", "Speed", "Min", "Max", "Device"); for (i = 0; i < sas0->NumPhys; i++) { phy0 = &sas0->PhyData[i]; phy1 = &sas1->PhyData[i]; if (phy0->PortFlags & MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { printf("Discovery still in progress\n"); continue; } if (phy0->PhyFlags & MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED) isdisabled = "Y"; else isdisabled = "N"; minspeed = get_device_speed(phy1->MaxMinLinkRate); maxspeed = get_device_speed(phy1->MaxMinLinkRate >> 4); type = get_device_type(le32toh(phy0->ControllerPhyDeviceInfo)); if (le16toh(phy0->AttachedDevHandle) != 0) { snprintf(devhandle, 5, "%04x", le16toh(phy0->AttachedDevHandle)); snprintf(ctrlhandle, 5, "%04x", le16toh(phy0->ControllerDevHandle)); speed = get_device_speed(phy0->NegotiatedLinkRate); } else { snprintf(devhandle, 5, " "); snprintf(ctrlhandle, 5, " "); speed = " "; } printf("%-8d%-12s%-11s%-10s%-8s%-7s%-7s%s\n", i, ctrlhandle, devhandle, isdisabled, speed, minspeed, maxspeed, type); } free(sas0); free(sas1); printf("\n"); close(fd); return (0); } MPS_COMMAND(show, adapter, show_adapter, "", "display controller information") static int show_iocfacts(int ac, char **av) { MPI2_IOC_FACTS_REPLY *facts; uint8_t *fb; char tmpbuf[128]; int error, fd; fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } if ((facts = mps_get_iocfacts(fd)) == NULL) { printf("could not get controller IOCFacts\n"); close(fd); return (errno); } fb = (uint8_t *)facts; #define IOCCAP "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf" \ "\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR" \ "\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc" \ "\22FastPath" "\23RDPQArray" "\24AtomicReqDesc" "\25PCIeSRIOV" bzero(tmpbuf, sizeof(tmpbuf)); mps_parse_flags(facts->IOCCapabilities, IOCCAP, tmpbuf, sizeof(tmpbuf)); printf(" MsgVersion: %d.%d\n", facts->MsgVersion >> 8, facts->MsgVersion & 0xff); printf(" MsgLength: %d\n", facts->MsgLength); printf(" Function: 0x%x\n", facts->Function); printf(" HeaderVersion: %02d,%02d\n", facts->HeaderVersion >> 8, facts->HeaderVersion & 0xff); printf(" IOCNumber: %d\n", facts->IOCNumber); printf(" MsgFlags: 0x%x\n", facts->MsgFlags); printf(" VP_ID: %d\n", facts->VP_ID); printf(" VF_ID: %d\n", facts->VF_ID); printf(" IOCExceptions: %d\n", facts->IOCExceptions); printf(" IOCStatus: %d\n", facts->IOCStatus); printf(" IOCLogInfo: 0x%x\n", facts->IOCLogInfo); printf(" MaxChainDepth: %d\n", facts->MaxChainDepth); printf(" WhoInit: 0x%x\n", facts->WhoInit); printf(" NumberOfPorts: %d\n", facts->NumberOfPorts); printf(" MaxMSIxVectors: %d\n", facts->MaxMSIxVectors); printf(" RequestCredit: %d\n", facts->RequestCredit); printf(" ProductID: 0x%x\n", facts->ProductID); printf(" IOCCapabilities: 0x%x %s\n", facts->IOCCapabilities, tmpbuf); printf(" FWVersion: %02d.%02d.%02d.%02d\n", facts->FWVersion.Struct.Major, facts->FWVersion.Struct.Minor, facts->FWVersion.Struct.Unit, facts->FWVersion.Struct.Dev); printf(" IOCRequestFrameSize: %d\n", facts->IOCRequestFrameSize); if (is_mps == 0) printf(" MaxChainSegmentSize: %d\n", (uint16_t)(fb[0x26])); printf(" MaxInitiators: %d\n", facts->MaxInitiators); printf(" MaxTargets: %d\n", facts->MaxTargets); printf(" MaxSasExpanders: %d\n", facts->MaxSasExpanders); printf(" MaxEnclosures: %d\n", facts->MaxEnclosures); bzero(tmpbuf, sizeof(tmpbuf)); mps_parse_flags(facts->ProtocolFlags, "\4NvmeDevices\2ScsiTarget\1ScsiInitiator", tmpbuf, sizeof(tmpbuf)); printf(" ProtocolFlags: 0x%x %s\n", facts->ProtocolFlags, tmpbuf); printf(" HighPriorityCredit: %d\n", facts->HighPriorityCredit); printf("MaxRepDescPostQDepth: %d\n", facts->MaxReplyDescriptorPostQueueDepth); printf(" ReplyFrameSize: %d\n", facts->ReplyFrameSize); printf(" MaxVolumes: %d\n", facts->MaxVolumes); printf(" MaxDevHandle: %d\n", facts->MaxDevHandle); printf("MaxPersistentEntries: %d\n", facts->MaxPersistentEntries); printf(" MinDevHandle: %d\n", facts->MinDevHandle); if (is_mps == 0) printf(" CurrentHostPageSize: %d\n", (uint8_t)(fb[0x3e])); free(facts); return (0); } MPS_COMMAND(show, iocfacts, show_iocfacts, "", "Show IOC Facts Message"); static int show_adapters(int ac, char **av) { MPI2_CONFIG_PAGE_MAN_0 *man0; MPI2_IOC_FACTS_REPLY *facts; int unit, fd, error; printf("Device Name\t Chip Name Board Name Firmware\n"); for (unit = 0; unit < MPS_MAX_UNIT; unit++) { fd = mps_open(unit); if (fd < 0) continue; facts = mps_get_iocfacts(fd); if (facts == NULL) { error = errno; warn("Faled to get controller iocfacts"); close(fd); return (error); } man0 = mps_read_man_page(fd, 0, NULL); if (man0 == NULL) { error = errno; warn("Failed to get controller info"); close(fd); free(facts); return (error); } if (man0->Header.PageLength < sizeof(*man0) / 4) { warnx("Invalid controller info"); close(fd); free(man0); free(facts); return (EINVAL); } printf("/dev/mp%s%d\t%16s %16s %08x\n", is_mps ? "s": "r", unit, man0->ChipName, man0->BoardName, facts->FWVersion.Word); free(man0); free(facts); close(fd); } return (0); } MPS_COMMAND(show, adapters, show_adapters, "", "Show a summary of all adapters"); static char * get_device_type(uint32_t di) { if (di & 0x4000) return ("SEP Target "); if (di & 0x2000) return ("ATAPI Target "); if (di & 0x400) return ("SAS Target "); if (di & 0x200) return ("STP Target "); if (di & 0x100) return ("SMP Target "); if (di & 0x80) return ("SATA Target "); if (di & 0x70) return ("SAS Initiator "); if (di & 0x8) return ("SATA Initiator"); if ((di & 0x7) == 0) return ("No Device "); return ("Unknown Device"); } static char * get_enc_type(uint32_t flags, int *issep) { char *type; *issep = 0; switch (flags & 0xf) { case 0x01: type = "Direct Attached SES-2"; *issep = 1; break; case 0x02: type = "Direct Attached SGPIO"; break; case 0x03: type = "Expander SGPIO"; break; case 0x04: type = "External SES-2"; *issep = 1; break; case 0x05: type = "Direct Attached GPIO"; break; case 0x0: default: return ("Unknown"); } return (type); } static char * mps_device_speed[] = { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "1.5", "3.0", "6.0", "12 " }; static char * get_device_speed(uint8_t rate) { char *speed; rate &= 0xf; if (rate >= sizeof(mps_device_speed)) return ("Unk"); if ((speed = mps_device_speed[rate]) == NULL) return ("???"); return (speed); } static char * mps_page_name[] = { "IO Unit", "IOC", "BIOS", NULL, NULL, NULL, NULL, NULL, "RAID Volume", "Manufacturing", "RAID Physical Disk", NULL, NULL, NULL, NULL, NULL, "SAS IO Unit", "SAS Expander", "SAS Device", "SAS PHY", "Log", "Enclosure", "RAID Configuration", "Driver Persistent Mapping", "SAS Port", "Ethernet Port", "Extended Manufacturing" }; static char * get_page_name(u_int page) { char *name; if (page >= sizeof(mps_page_name)) return ("Unknown"); if ((name = mps_page_name[page]) == NULL) return ("Unknown"); return (name); } static int show_all(int ac, char **av) { int error; printf("Adapter:\n"); error = show_adapter(ac, av); printf("Devices:\n"); error = show_devices(ac, av); printf("Enclosures:\n"); error = show_enclosures(ac, av); printf("Expanders:\n"); error = show_expanders(ac, av); return (error); } MPS_COMMAND(show, all, show_all, "", "Show all devices"); static int show_devices(int ac, char **av) { MPI2_CONFIG_PAGE_SASIOUNIT_0 *sas0; MPI2_SAS_IO_UNIT0_PHY_DATA *phydata; MPI2_CONFIG_PAGE_SAS_DEV_0 *device; MPI2_CONFIG_PAGE_EXPANDER_1 *exp1; uint16_t IOCStatus, handle, bus, target; char *type, *speed, enchandle[5], slot[3], bt[8]; char buf[256]; int fd, error, nphys; fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } sas0 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT, MPI2_SASIOUNITPAGE0_PAGEVERSION, 0, 0, &IOCStatus); if (sas0 == NULL) { error = errno; warn("Error retrieving SAS IO Unit page %d", IOCStatus); return (error); } nphys = sas0->NumPhys; printf("B____%-5s%-17s%-8s%-10s%-14s%-6s%-5s%-6s%s\n", "T", "SAS Address", "Handle", "Parent", "Device", "Speed", "Enc", "Slot", "Wdt"); handle = 0xffff; while (1) { device = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE, MPI2_SASDEVICE0_PAGEVERSION, 0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE | handle, &IOCStatus); if (device == NULL) { if (IOCStatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; error = errno; warn("Error retrieving device page"); close(fd); return (error); } handle = le16toh(device->DevHandle); if (device->ParentDevHandle == 0x0) { free(device); continue; } bus = 0xffff; target = 0xffff; error = mps_map_btdh(fd, &handle, &bus, &target); if (error) { free(device); continue; } if ((bus == 0xffff) || (target == 0xffff)) snprintf(bt, sizeof(bt), " "); else snprintf(bt, sizeof(bt), "%02d %02d", bus, target); type = get_device_type(le32toh(device->DeviceInfo)); if (device->PhyNum < nphys) { phydata = &sas0->PhyData[device->PhyNum]; speed = get_device_speed(phydata->NegotiatedLinkRate); } else if (device->ParentDevHandle > 0) { exp1 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER, MPI2_SASEXPANDER1_PAGEVERSION, 1, MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | (device->PhyNum << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | le16toh(device->ParentDevHandle), &IOCStatus); if (exp1 == NULL) { if (IOCStatus != MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) { error = errno; warn("Error retrieving expander page 1: 0x%x", IOCStatus); close(fd); free(device); return (error); } speed = " "; } else { speed = get_device_speed(exp1->NegotiatedLinkRate); free(exp1); } } else speed = " "; if (device->EnclosureHandle != 0) { snprintf(enchandle, 5, "%04x", le16toh(device->EnclosureHandle)); snprintf(slot, 3, "%02d", le16toh(device->Slot)); } else { snprintf(enchandle, 5, " "); snprintf(slot, 3, " "); } printf("%-10s", bt); snprintf(buf, sizeof(buf), "%08x%08x", le32toh(device->SASAddress.High), le32toh(device->SASAddress.Low)); printf("%-17s", buf); snprintf(buf, sizeof(buf), "%04x", le16toh(device->DevHandle)); printf("%-8s", buf); snprintf(buf, sizeof(buf), "%04x", le16toh(device->ParentDevHandle)); printf("%-10s", buf); printf("%-14s%-6s%-5s%-6s%d\n", type, speed, enchandle, slot, device->MaxPortConnections); free(device); } printf("\n"); free(sas0); close(fd); return (0); } MPS_COMMAND(show, devices, show_devices, "", "Show attached devices"); static int show_enclosures(int ac, char **av) { MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 *enc; char *type, sepstr[5]; uint16_t IOCStatus, handle; int fd, error, issep; fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } printf("Slots Logical ID SEPHandle EncHandle Type\n"); handle = 0xffff; while (1) { enc = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE, MPI2_SASENCLOSURE0_PAGEVERSION, 0, MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE | handle, &IOCStatus); if (enc == NULL) { if (IOCStatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; error = errno; warn("Error retrieving enclosure page"); close(fd); return (error); } type = get_enc_type(le16toh(enc->Flags), &issep); if (issep == 0) snprintf(sepstr, 5, " "); else snprintf(sepstr, 5, "%04x", le16toh(enc->SEPDevHandle)); printf(" %.2d %08x%08x %s %04x %s\n", le16toh(enc->NumSlots), le32toh(enc->EnclosureLogicalID.High), le32toh(enc->EnclosureLogicalID.Low), sepstr, le16toh(enc->EnclosureHandle), type); handle = le16toh(enc->EnclosureHandle); free(enc); } printf("\n"); close(fd); return (0); } MPS_COMMAND(show, enclosures, show_enclosures, "", "Show attached enclosures"); static int show_expanders(int ac, char **av) { MPI2_CONFIG_PAGE_EXPANDER_0 *exp0; MPI2_CONFIG_PAGE_EXPANDER_1 *exp1; uint16_t IOCStatus, handle; char enchandle[5], parent[5], rphy[3], rhandle[5]; char *speed, *min, *max, *type; int fd, error, nphys, i; fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } printf("NumPhys SAS Address DevHandle Parent EncHandle SAS Level\n"); handle = 0xffff; while (1) { exp0 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER, MPI2_SASEXPANDER0_PAGEVERSION, 0, MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL | handle, &IOCStatus); if (exp0 == NULL) { if (IOCStatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; error = errno; warn("Error retrieving expander page 0"); close(fd); return (error); } nphys = exp0->NumPhys; handle = le16toh(exp0->DevHandle); if (exp0->EnclosureHandle == 0x00) snprintf(enchandle, 5, " "); else snprintf(enchandle, 5, "%04d", le16toh(exp0->EnclosureHandle)); if (exp0->ParentDevHandle == 0x0) snprintf(parent, 5, " "); else snprintf(parent, 5, "%04x", le16toh(exp0->ParentDevHandle)); printf(" %02d %08x%08x %04x %s %s %d\n", exp0->NumPhys, le32toh(exp0->SASAddress.High), le32toh(exp0->SASAddress.Low), le16toh(exp0->DevHandle), parent, enchandle, exp0->SASLevel); printf("\n"); printf(" Phy RemotePhy DevHandle Speed Min Max Device\n"); for (i = 0; i < nphys; i++) { exp1 = mps_read_extended_config_page(fd, MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER, MPI2_SASEXPANDER1_PAGEVERSION, 1, MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | (i << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | exp0->DevHandle, &IOCStatus); if (exp1 == NULL) { if (IOCStatus != MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) warn("Error retrieving expander pg 1"); continue; } type = get_device_type(le32toh(exp1->AttachedDeviceInfo)); if ((le32toh(exp1->AttachedDeviceInfo) &0x7) == 0) { speed = " "; snprintf(rphy, 3, " "); snprintf(rhandle, 5, " "); } else { speed = get_device_speed( exp1->NegotiatedLinkRate); snprintf(rphy, 3, "%02d", exp1->AttachedPhyIdentifier); snprintf(rhandle, 5, "%04x", le16toh(exp1->AttachedDevHandle)); } min = get_device_speed(exp1->HwLinkRate); max = get_device_speed(exp1->HwLinkRate >> 4); printf(" %02d %s %s %s %s %s %s\n", exp1->Phy, rphy, rhandle, speed, min, max, type); free(exp1); } free(exp0); } printf("\n"); close(fd); return (0); } MPS_COMMAND(show, expanders, show_expanders, "", "Show attached expanders"); static int show_cfgpage(int ac, char **av) { MPI2_CONFIG_PAGE_HEADER *hdr; MPI2_CONFIG_EXTENDED_PAGE_HEADER *ehdr; void *data; uint32_t addr; uint16_t IOCStatus; uint8_t page, num; int fd, error, len, attrs; char *pgname, *pgattr; fd = mps_open(mps_unit); if (fd < 0) { error = errno; warn("mps_open"); return (error); } addr = 0; num = 0; page = 0; switch (ac) { case 4: addr = htole32((uint32_t)strtoul(av[3], NULL, 0)); case 3: num = (uint8_t)strtoul(av[2], NULL, 0); case 2: page = (uint8_t)strtoul(av[1], NULL, 0); break; default: errno = EINVAL; warn("cfgpage: not enough arguments"); return (EINVAL); } if (page >= 0x10) data = mps_read_extended_config_page(fd, page, 0, num, addr, &IOCStatus); else data = mps_read_config_page(fd, page, num, addr, &IOCStatus); if (data == NULL) { error = errno; warn("Error retrieving cfg page: %s\n", mps_ioc_status(IOCStatus)); return (error); } if (page >= 0x10) { ehdr = data; len = le16toh(ehdr->ExtPageLength) * 4; page = ehdr->ExtPageType; attrs = ehdr->PageType >> 4; } else { hdr = data; len = hdr->PageLength * 4; page = hdr->PageType & 0xf; attrs = hdr->PageType >> 4; } pgname = get_page_name(page); if (attrs == 0) pgattr = "Read-only"; else if (attrs == 1) pgattr = "Read-Write"; else if (attrs == 2) pgattr = "Read-Write Persistent"; else pgattr = "Unknown Page Attribute"; printf("Page 0x%x: %s %d, %s\n", page, pgname, num, pgattr); hexdump(data, len, NULL, HD_REVERSED | 4); free(data); close(fd); return (0); } MPS_COMMAND(show, cfgpage, show_cfgpage, "page [num] [addr]", "Display config page"); diff --git a/usr.sbin/mpsutil/mpsutil.8 b/usr.sbin/mpsutil/mpsutil.8 index 1bb7c4d5eaec..e7c2fda8f84e 100644 --- a/usr.sbin/mpsutil/mpsutil.8 +++ b/usr.sbin/mpsutil/mpsutil.8 @@ -1,168 +1,174 @@ .\" .\" Copyright (c) Baptiste Daroussin .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" -.Dd March 25, 2021 +.Dd May 7, 2021 .Dt MPSUTIL 8 .Os .Sh NAME .Nm mpsutil , .Nm mprutil .Nd Utility for managing LSI Fusion-MPT 2/3 controllers .Sh SYNOPSIS .Nm .Cm version .Nm .Op Fl u Ar unit .Cm show adapter .Nm .Op Fl u Ar unit .Cm show adapters .Nm .Op Fl u Ar unit .Cm show all .Nm .Op Fl u Ar unit .Cm show cfgpage page .Op Ar num .Op Ar addr .Nm .Op Fl u Ar unit .Cm show devices .Nm .Op Fl u Ar unit .Cm show enclosures .Nm .Op Fl u Ar unit .Cm show expanders .Nm .Op Fl u Ar unit .Cm show iocfacts .Nm .Op Fl u Ar unit +.Cm set ncq +.Op Ar enable Ns | Ns Ar disable +.Nm +.Op Fl u Ar unit .Cm flash save .Op Ar firmware Ns | Ns Ar bios .Op Ar file .Nm .Op Fl u Ar unit .Cm flash update .Op Ar firmware Ns | Ns Ar bios .Ar file .Sh DESCRIPTION The .Nm utility can be used to display or modify various parameters on LSI Fusion-MPS 2 controllers. .Pp The .Nm mprutil utility can be used to display or modify various parameters on LSI Fusion-MPS 3 controllers. .Pp The .Nm mprutil utility behave identically to .Nm . (same program) .Pp Each invocation of .Nm consists of zero or more global options followed by a command. Commands may support additional optional or required arguments after the command. .Pp Currently one global option is supported: .Bl -tag -width indent .It Fl u Ar unit .Ar unit specifies the unit of the controller to work with. If no unit is specified, then unit 0 is used. .El .Pp The .Nm utility supports several different groups of commands. The first group of commands provide information about the controller. The second group of commands are used to manager controller-wide operations. .Pp The informational commands include: .Bl -tag -width indent .It Cm version Displays the version of .Nm . .It Cm show adapter Displays information about the controller such as the model number or firmware version. .It Cm show adapters Displays a summary of all adapters. .It Cm show all Displays all devices, expanders and enclosures. .It Cm show devices Displays all devices. .It Cm show expanders Displays all expanders. .It Cm show enclosures Displays all enclosures. .It Cm show iocfacts Displays IOC Facts messages. .It Cm show cfgpage page Oo Ar num Oc Op Ar addr Dump raw config page in hex. .El .Pp Controller management commands include: .Bl -tag -width indent +.It Cm set ncq Oo Ar enable Ns | Ns Ar disable Oc +Enables or disables NCQ in the NVRAM of the card. .It Cm flash save Oo Ar firmware Ns | Ns Ar bios Oc Op Ar file Save the .Ar firmware or .Ar bios from the controller into a local .Ar file . If no .Ar file is specified then the file will be named .Pa firmware or .Pa bios . .It Cm flash update Oo Ar firmware Ns | Ns Ar bios Oc Ar file Replace the .Ar firmware or .Ar bios from the controller with the one specified via .Ar file . .El .Sh SEE ALSO .Xr mpr 4 , .Xr mps 4 .Sh HISTORY The .Nm utility first appeared in .Fx 11.0 . .Sh TODO Flash operations (save/update) are not supported on big-endian architectures. .Pp