diff --git a/libexec/rc/rc.conf b/libexec/rc/rc.conf
index 55a7112b15ea..998cd3fd14d6 100644
--- a/libexec/rc/rc.conf
+++ b/libexec/rc/rc.conf
@@ -1,775 +1,772 @@
 #!/bin/sh
 
 # This is rc.conf - a file full of useful variables that you can set
 # to change the default startup behavior of your system.  You should
 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
 # instead and you will be able to update these defaults later without
 # spamming your local configuration information.
 #
 # The ${rc_conf_files} files should only contain values which override
 # values set in this file.  This eases the upgrade path when defaults
 # are changed and new features are added.
 #
 # All arguments must be in double or single quotes.
 #
 # For a more detailed explanation of all the rc.conf variables, please
 # refer to the rc.conf(5) manual page.
 #
 # $FreeBSD$
 
 ##############################################################
 ###  Important initial Boot-time options  ####################
 ##############################################################
 
 # Set default value of _localbase if not previously set
 : ${_localbase:="/usr/local"}
 
 # rc_debug can't be set here without interferring with rc.subr's setting it
 # when the kenv variable rc.debug is set.
 #rc_debug="NO"		# Set to YES to enable debugging output from rc.d
 rc_info="NO"		# Enables display of informational messages at boot.
 rc_startmsgs="YES" 	# Show "Starting foo:" messages at boot
 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
 early_late_divider="FILESYSTEMS"	# Script that separates early/late
 			# stages of the boot process.  Make sure you know
 			# the ramifications if you change this.
 			# See rc.conf(5) for more details.
 always_force_depends="NO"	# Set to check that indicated dependencies are
 				# running during boot (can increase boot time).
 
 apm_enable="NO"		# Set to YES to enable APM BIOS functions (or NO).
 apmd_enable="NO"	# Run apmd to handle APM event from userland.
 apmd_flags=""		# Flags to apmd (if enabled).
 ddb_enable="NO"		# Set to YES to load ddb scripts at boot.
 ddb_config="/etc/ddb.conf"	# ddb(8) config file.
 devd_enable="YES" 	# Run devd, to trigger programs on device tree changes.
 devd_flags=""		# Additional flags for devd(8).
 devmatch_enable="YES"	# Demand load kernel modules based on device ids.
 devmatch_blacklist=""	# List of modules (w/o .ko) to exclude from devmatch.
 #kld_list="" 		# Kernel modules to load after local disks are mounted
 kldxref_enable="YES"	# Build linker.hints files with kldxref(8).
 kldxref_clobber="NO"	# Overwrite old linker.hints at boot.
 kldxref_module_path=""	# Override kern.module_path. A ';'-delimited list.
 powerd_enable="NO" 	# Run powerd to lower our power usage.
 powerd_flags=""		# Flags to powerd (if enabled).
 tmpmfs="AUTO"		# Set to YES to always create an mfs /tmp, NO to never
 tmpsize="20m"		# Size of mfs /tmp if created
 tmpmfs_flags="-S"	# Extra mdmfs options for the mfs /tmp
 varmfs="AUTO"		# Set to YES to always create an mfs /var, NO to never
 varsize="32m"		# Size of mfs /var if created
 varmfs_flags="-S"	# Extra mount options for the mfs /var
 mfs_type="auto"		# "md", "tmpfs", "auto" to prefer tmpfs with md as fallback
 populate_var="AUTO"	# Set to YES to always (re)populate /var, NO to never
 cleanvar_enable="YES" 	# Clean the /var directory
 local_startup="${_localbase}/etc/rc.d" # startup script dirs.
 script_name_sep=" "	# Change if your startup scripts' names contain spaces
 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
 
 # ZFS support
 zfs_enable="NO"		# Set to YES to automatically mount ZFS file systems
 zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent
 
 # ZFSD support
 zfsd_enable="NO"	# Set to YES to automatically start the ZFS fault
 			# management daemon.
 
 gptboot_enable="YES"	# GPT boot success/failure reporting.
 
 # Experimental - test before enabling
 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
 gbde_devices="NO" 	# Devices to automatically attach (list, or AUTO)
 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
 gbde_lockdir="/etc"	# Where to look for gbde lockfiles
 
 # GELI disk encryption configuration.
 geli_devices=""		# List of devices to automatically attach in addition to
 			# GELI devices listed in /etc/fstab.
 geli_groups=""		# List of groups containing devices to automatically
 			# attach with the same keyfiles and passphrase
 geli_tries=""		# Number of times to attempt attaching geli device.
 			# If empty, kern.geom.eli.tries will be used.
 geli_default_flags=""	# Default flags for geli(8).
 geli_autodetach="YES"	# Automatically detach on last close.
 			# Providers are marked as such when all file systems are
 			# mounted.
 # Example use.
 #geli_devices="da1 mirror/home"
 #geli_da1_flags="-p -k /etc/geli/da1.keys"
 #geli_da1_autodetach="NO"
 #geli_mirror_home_flags="-k /etc/geli/home.keys"
 #geli_groups="storage backup"
 #geli_storage_flags="-k /etc/geli/storage.keys"
 #geli_storage_devices="ada0 ada1"
 #geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
 #geli_backup_devices="ada2 ada3"
 
 root_rw_mount="YES"	# Set to NO to inhibit remounting root read-write.
 root_hold_delay="30"	# Time to wait for root mount hold release.
 fsck_flags="-p"		# May be changed to -f (or -f -y) to force a full fsck
 fsck_y_enable="NO"	# Set to YES to do fsck -y if the initial preen fails.
 fsck_y_flags="-T ffs:-R -T ufs:-R"	# Additional flags for fsck -y
 background_fsck="YES"	# Attempt to run fsck in the background where possible.
 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
 growfs_enable="NO"	# Set to YES to attempt to grow the root filesystem on boot
 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
 extra_netfs_types="NO"	# List of network extra filesystem types for delayed
 			# mount at startup (or NO).
 
 ##############################################################
 ###  Network configuration sub-section  ######################
 ##############################################################
 
 ### Basic network and firewall/security options: ###
 hostname=""			# Set this!
 hostid_enable="YES"		# Set host UUID.
 hostid_file="/etc/hostid"	# File with hostuuid.
 nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
 dhclient_program="/sbin/dhclient"	# Path to dhcp client program.
 dhclient_flags=""		# Extra flags to pass to dhcp client.
 #dhclient_flags_em0=""		# Extra dhclient flags for em0 only
 background_dhclient="NO"	# Start dhcp client in the background.
 #background_dhclient_em0="YES"	# Start dhcp client on em0 in the background.
 synchronous_dhclient="NO"	# Start dhclient directly on configured
 				# interfaces during startup.
 defaultroute_delay="30"		# Time to wait for a default route on a DHCP interface.
 defaultroute_carrier_delay="5"	# Time to wait for carrier while waiting for a default route.
 netif_enable="YES"		# Set to YES to initialize network interfaces
 netif_ipexpand_max="2048"	# Maximum number of IP addrs in a range spec.
 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
 wpa_supplicant_flags="-s"	# Extra flags to pass to wpa_supplicant
 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
 #
 firewall_enable="NO"		# Set to YES to enable firewall functionality
 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
 firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
 firewall_quiet="NO"		# Set to YES to suppress rule display
 firewall_logging="NO"		# Set to YES to enable events logging
 firewall_logif="NO"		# Set to YES to create logging-pseudo interface
 firewall_flags=""		# Flags passed to ipfw when type is a file
 firewall_coscripts=""		# List of executables/scripts to run after
 				# firewall starts/stops
 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
 				# firewall.
 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
 				# "client" firewall.
 firewall_simple_iif="em1"	# Inside network interface for "simple"
 				# firewall.
 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
 				# firewall.
 firewall_simple_oif="em0"	# Outside network interface for "simple"
 				# firewall.
 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
 				# firewall.
 #firewall_simple_iif_ipv6="em1"	# Inside IPv6 network interface for "simple"
 				# firewall.
 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
 				# for "simple" firewall.
 #firewall_simple_oif_ipv6="em0"	# Outside IPv6 network interface for "simple"
 				# firewall.
 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
 				# for "simple" firewall.
 firewall_myservices=""		# List of ports/protocols on which this host
 				# offers services for "workstation" firewall.
 firewall_allowservices=""	# List of IPs which have access to
 				# $firewall_myservices for "workstation"
 				# firewall.
 firewall_trusted=""		# List of IPs which have full access to this
 				# host for "workstation" firewall.
 firewall_logdeny="NO"		# Set to YES to log default denied incoming
 				# packets for "workstation" firewall.
 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
 				# for which denied incoming packets are not
 				# logged for "workstation" firewall.
 firewall_nat_enable="NO"	# Enable kernel NAT (if firewall_enable == YES)
 firewall_nat_interface=""	# Public interface or IPaddress to use
 firewall_nat_flags=""		# Additional configuration parameters
 firewall_nat64_enable="NO"	# Enable kernel NAT64 module.
 firewall_nptv6_enable="NO"	# Enable kernel NPTv6 module.
 firewall_pmod_enable="NO"	# Enable kernel protocols modification module.
 dummynet_enable="NO"		# Load the dummynet(4) module
 ipfw_netflow_enable="NO"	# Enable netflow logging via ng_netflow
 ip_portrange_first="NO"		# Set first dynamically allocated port
 ip_portrange_last="NO"		# Set last dynamically allocated port
 ike_enable="NO"			# Enable IKE daemon (usually racoon or isakmpd)
 ike_program="${_localbase}/sbin/isakmpd"	# Path to IKE daemon
 ike_flags=""			# Additional flags for IKE daemon
 ipsec_enable="NO"		# Set to YES to run setkey on ipsec_file
 ipsec_file="/etc/ipsec.conf"	# Name of config file for setkey
 natd_program="/sbin/natd"	# path to natd, if you want a different one.
 natd_enable="NO"		# Enable natd (if firewall_enable == YES).
 natd_interface=""		# Public interface or IPaddress to use.
 natd_flags=""			# Additional flags for natd.
 ipfilter_enable="NO"		# Set to YES to enable ipfilter functionality
 ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
 ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
 				# /usr/src/contrib/ipfilter/rules for examples
 ipfilter_flags=""		# additional flags for ipfilter
 ippool_enable="NO"		# Set to YES to enable ip filter pools
 ippool_program="/sbin/ippool"	# where the ippool program lives
 ippool_rules="/etc/ippool.tables"	# rules definition file for ippool
 ippool_flags=""			# additional flags for ippool
 ipnat_enable="NO"		# Set to YES to enable ipnat functionality
 ipnat_program="/sbin/ipnat"	# where the ipnat program lives
 ipnat_rules="/etc/ipnat.rules"	# rules definition file for ipnat
 ipnat_flags=""			# additional flags for ipnat
 ipmon_enable="NO"		# Set to YES for ipmon; needs ipfilter or ipnat
 ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
 ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
 ipfs_enable="NO"		# Set to YES to enable saving and restoring
 				# of state tables at shutdown and boot
 ipfs_program="/sbin/ipfs"	# where the ipfs program lives
 ipfs_flags=""			# additional flags for ipfs
 pf_enable="NO"			# Set to YES to enable packet filter (pf)
 pf_rules="/etc/pf.conf"		# rules definition file for pf (nonexistent
 				# by default)
 pf_program="/sbin/pfctl"	# where the pfctl program lives
 pf_flags=""			# additional flags for pfctl
 pflog_enable="NO"		# Set to YES to enable packet filter logging
 pflog_logfile="/var/log/pflog"	# where pflogd should store the logfile
 pflog_program="/sbin/pflogd"	# where the pflogd program lives
 pflog_flags=""			# additional flags for pflogd
 ftpproxy_enable="NO"		# Set to YES to enable ftp-proxy(8) for pf
 ftpproxy_flags=""		# additional flags for ftp-proxy(8)
 pfsync_enable="NO"		# Expose pf state to other hosts for syncing
 pfsync_syncdev=""		# Interface for pfsync to work through
 pfsync_syncpeer=""		# IP address of pfsync peer host
 pfsync_ifconfig=""		# Additional options to ifconfig(8) for pfsync
 tcp_extensions="YES"		# Set to NO to turn off RFC1323 extensions.
 log_in_vain="0"			# >=1 to log connects to ports w/o listeners.
 tcp_keepalive="YES"		# Enable stale TCP connection timeout (or NO).
 tcp_drop_synfin="NO"		# Set to YES to drop TCP packets with SYN+FIN
 				# NOTE: this violates the TCP specification
 icmp_drop_redirect="auto" 	# Set to YES to ignore ICMP REDIRECT packets
 icmp_log_redirect="NO"		# Set to YES to log ICMP REDIRECT packets
 network_interfaces="auto"	# List of network interfaces (or "auto").
 cloned_interfaces=""		# List of cloned network interfaces to create.
 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
 #ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
 #ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
 #ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
 #ifconfig_em0_name="net0"	# Change interface name from em0 to net0.
 #vlans_em0="101 vlan0"		# vlan(4) interfaces for em0 device
 #create_args_vlan0="vlan 102"	# vlan tag for vlan0 device
 #wlans_ath0="wlan0"		# wlan(4) interfaces for ath0 device
 #wlandebug_wlan0="scan+auth+assoc"	# Set debug flags with wlandebug(8)
 #ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
 #
 #autobridge_interfaces="bridge0"	# List of bridges to check
 #autobridge_bridge0="tap* vlan0"	# Interface glob to automatically add to the bridge
 #
 # If you have any sppp(4) interfaces above, you might also want to set
 # the following parameters.  Refer to spppcontrol(8) for their meaning.
 sppp_interfaces=""		# List of sppp interfaces.
 #sppp_interfaces="...0"		# example: sppp over ...
 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
 
 # User ppp configuration.
 ppp_enable="NO"		# Start user-ppp (or NO).
 ppp_program="/usr/sbin/ppp"	# Path to user-ppp program.
 ppp_mode="auto"		# Choice of "auto", "ddial", "direct" or "dedicated".
 			# For details see man page for ppp(8). Default is auto.
 ppp_nat="YES"		# Use PPP's internal network address translation or NO.
 ppp_profile="papchap"	# Which profile to use from /etc/ppp/ppp.conf.
 ppp_user="root"		# Which user to run ppp as
 
 # Start multiple instances of ppp at boot time
 #ppp_profile="profile1 profile2 profile3"	# Which profiles to use
 #ppp_profile1_mode="ddial"	# Override ppp mode for profile1
 #ppp_profile2_nat="NO"		# Override nat mode for profile2
 # profile3 uses default ppp_mode and ppp_nat
 
 ### Network daemon (miscellaneous) ###
 hostapd_program="/usr/sbin/hostapd"
 hostapd_enable="NO"		# Run hostap daemon.
 syslogd_enable="YES"		# Run syslog daemon (or NO).
 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
 syslogd_flags="-s"		# Flags to syslogd (if enabled).
 syslogd_oomprotect="YES"	# Don't kill syslogd when swap space is exhausted. 
 altlog_proglist=""		# List of chrooted applicatioins in /var
 inetd_enable="NO"		# Run the network daemon dispatcher (YES/NO).
 inetd_program="/usr/sbin/inetd"	# path to inetd, if you want a different one.
 inetd_flags="-wW -C 60"		# Optional flags to inetd
 iscsid_enable="NO"		# iSCSI initiator daemon.
 iscsictl_enable="NO"		# iSCSI initiator autostart.
 iscsictl_flags="-Aa"		# Optional flags to iscsictl.
 hastd_enable="NO"		# Run the HAST daemon (YES/NO).
 hastd_program="/sbin/hastd"	# path to hastd, if you want a different one.
 hastd_flags=""			# Optional flags to hastd.
 ctld_enable="NO"		# CAM Target Layer / iSCSI target daemon.
 local_unbound_enable="NO"	# Local caching resolver
 local_unbound_tls="NO"		# Use DNS over TLS
 blacklistd_enable="NO"		# Run blacklistd daemon (YES/NO).
 blacklistd_flags=""		# Optional flags for blacklistd(8).
 resolv_enable="YES"		# Enable resolv / resolvconf
 
 #
 # kerberos. Do not run the admin daemons on slave servers
 #
 kdc_enable="NO"			# Run a kerberos 5 KDC (or NO).
 kdc_program="/usr/libexec/kdc"	# path to kerberos 5 KDC
 kdc_flags=""			# Additional flags to the kerberos 5 KDC
 kadmind_enable="NO"		# Run kadmind (or NO)
 kadmind_program="/usr/libexec/kadmind"	# path to kadmind
 kpasswdd_enable="NO"		# Run kpasswdd (or NO)
 kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
 kfd_enable="NO"			# Run kfd (or NO)
 kfd_program="/usr/libexec/kfd"	# path to kerberos 5 kfd daemon
 kfd_flags=""
 ipropd_master_enable="NO"	# Run Heimdal incremental propagation daemon
 				# (master daemon).
 ipropd_master_program="/usr/libexec/ipropd-master"
 ipropd_master_flags=""		# Flags to ipropd-master.
 ipropd_master_keytab="/etc/krb5.keytab"	# keytab for ipropd-master.
 ipropd_master_slaves=""		# slave node names used for /var/heimdal/slaves.
 ipropd_slave_enable="NO"	# Run Heimdal incremental propagation daemon
 				# (slave daemon).
 ipropd_slave_program="/usr/libexec/ipropd-slave"
 ipropd_slave_flags=""		# Flags to ipropd-slave.
 ipropd_slave_keytab="/etc/krb5.keytab"	# keytab for ipropd-slave.
 ipropd_slave_master=""		# master node name.
 
 gssd_enable="NO"		# Run the gssd daemon (or NO).
 gssd_program="/usr/sbin/gssd"	# Path to gssd.
 gssd_flags=""			# Flags for gssd.
 
 rwhod_enable="NO"		# Run the rwho daemon (or NO).
 rwhod_flags=""			# Flags for rwhod
 rarpd_enable="NO"		# Run rarpd (or NO).
 rarpd_flags="-a"		# Flags to rarpd.
 bootparamd_enable="NO"		# Run bootparamd (or NO).
 bootparamd_flags=""		# Flags to bootparamd
 pppoed_enable="NO"		# Run the PPP over Ethernet daemon.
 pppoed_provider="*"		# Provider and ppp(8) config file entry.
 pppoed_flags="-P /var/run/pppoed.pid"	# Flags to pppoed (if enabled).
 pppoed_interface="em0"		# The interface that pppoed runs on.
 sshd_enable="NO"		# Enable sshd
 sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
 sshd_flags=""			# Additional flags for sshd.
 ftpd_enable="NO"		# Enable stand-alone ftpd.
 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
 ftpd_flags=""			# Additional flags to stand-alone ftpd.
 
 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
 amd_enable="NO"			# Run amd service with $amd_flags (or NO).
 amd_program="/usr/sbin/amd"	# path to amd, if you want a different one.
 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
 amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
 autofs_enable="NO"		# Run autofs daemons.
 automount_flags=""		# Flags to automount(8) (if autofs enabled).
 automountd_flags=""		# Flags to automountd(8) (if autofs enabled).
 autounmountd_flags=""		# Flags to autounmountd(8) (if autofs enabled).
 nfs_client_enable="NO"		# This host is an NFS client (or NO).
 nfs_access_cache="60"		# Client cache timeout in seconds
 nfs_server_enable="NO"		# This host is an NFS server (or NO).
 nfs_server_flags="-u -t"	# Flags to nfsd (if enabled).
 nfs_server_managegids="NO"	# The NFS server maps gids for AUTH_SYS (or NO).
 mountd_enable="NO"		# Run mountd (or NO).
 mountd_flags="-r -S"		# Flags to mountd (if NFS server enabled).
 weak_mountd_authentication="NO"	# Allow non-root mount requests to be served.
 nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
 nfs_bufpackets=""		# bufspace (in packets) for client
 rpc_lockd_enable="NO"		# Run NFS rpc.lockd needed for client/server.
 rpc_lockd_flags=""		# Flags to rpc.lockd (if enabled).
 rpc_statd_enable="NO"		# Run NFS rpc.statd needed for client/server.
 rpc_statd_flags=""		# Flags to rpc.statd (if enabled).
 rpcbind_enable="NO"		# Run the portmapper service (YES/NO).
 rpcbind_program="/usr/sbin/rpcbind"	# path to rpcbind, if you want a different one.
 rpcbind_flags=""		# Flags to rpcbind (if enabled).
 rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
 keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
 keyserv_flags=""		# Flags to keyserv (if enabled).
 nfsv4_server_enable="NO"	# Enable support for NFSv4
 nfsv4_server_only="NO"		# Set NFS server to NFSv4 only
 nfscbd_enable="NO"		# NFSv4 client side callback daemon
 nfscbd_flags=""			# Flags for nfscbd
 nfsuserd_enable="NO"		# NFSv4 user/group name mapping daemon
 nfsuserd_flags=""		# Flags for nfsuserd
 tlsclntd_enable="NO"		# Run rpc.tlsclntd needed for NFS-over-TLS mount
 tlsclntd_flags=""		# Flags for rpc.tlsclntd
 tlsservd_enable="NO"		# Run rpc.tlsservd needed for NFS-over-TLS nfsd
 tlsservd_flags=""		# Flags for rpc.tlsservd
 
 ### Network Time Services options: ###
 timed_enable="NO"		# Run the time daemon (or NO).
 timed_flags=""			# Flags to timed (if enabled).
 ntpdate_enable="NO"		# Run ntpdate to sync time on boot (or NO).
 ntpdate_program="/usr/sbin/ntpdate"	# path to ntpdate, if you want a different one.
 ntpdate_flags="-b"		# Flags to ntpdate (if enabled).
 ntpdate_config="/etc/ntp.conf"	# ntpdate(8) configuration file
 ntpdate_hosts=""		# Whitespace-separated list of ntpdate(8) servers.
 ntpd_enable="NO"		# Run ntpd Network Time Protocol (or NO).
 ntpd_program="/usr/sbin/ntpd"	# path to ntpd, if you want a different one.
 ntpd_config="/etc/ntp.conf"	# ntpd(8) configuration file
 ntpd_sync_on_start="NO"		# Sync time on ntpd startup, even if offset is high
 ntpd_flags=""			# Additional flags to ntpd
 ntp_src_leapfile="/etc/ntp/leap-seconds"
 				# Initial source for ntpd leapfile
 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
 				# Working copy (updated weekly) leapfile
 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
 				# Source from which to fetch leapfile
 ntp_leapfile_fetch_opts="-mq"	# Options to use for ntp leapfile fetch,
 				# e.g. --no-verify-peer
 ntp_leapfile_expiry_days=30	# Check for new leapfile 30 days prior to
 				# expiry.
 ntp_leapfile_fetch_verbose="NO"	# Be verbose during NTP leapfile fetch
 
 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
 nis_client_enable="NO"		# We're an NIS client (or NO).
 nis_client_flags=""		# Flags to ypbind (if enabled).
 nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
 nis_ypset_flags=""		# Flags to ypset (if enabled).
 nis_server_enable="NO"		# We're an NIS server (or NO).
 nis_server_flags=""		# Flags to ypserv (if enabled).
 nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
 nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
 nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
 nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).
 nis_ypldap_enable="NO"		# Run ypldap at boot time (or NO).
 nis_ypldap_flags=""		# Flags to ypldap (if enabled).
 
 ### SNMP daemon ###
 # Be sure to understand the security implications of running SNMP v1/v2
 # in your network.
 bsnmpd_enable="NO"		# Run the SNMP daemon (or NO).
 bsnmpd_flags=""			# Flags for bsnmpd.
 
 ### Network routing options: ###
 defaultrouter="NO"		# Set to default gateway (or NO).
 static_arp_pairs=""		# Set to static ARP list (or leave empty).
 static_ndp_pairs=""		# Set to static NDP list (or leave empty).
 static_routes=""		# Set to static route list (or leave empty).
 gateway_enable="NO"		# Set to YES if this host will be a gateway.
 routed_enable="NO"		# Set to YES to enable a routing daemon.
 routed_program="/sbin/routed"	# Name of routing daemon to use if enabled.
 routed_flags="-q"		# Flags for routing daemon.
 arpproxy_all="NO"		# replaces obsolete kernel option ARP_PROXYALL.
 forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
 accept_sourceroute="NO"		# accept source routed packets to us
 
 ### Bluetooth ###
 hcsecd_enable="NO"		# Enable hcsecd(8) (or NO)
 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
 
 sdpd_enable="NO"		# Enable sdpd(8) (or NO)
 sdpd_control="/var/run/sdp"	# sdpd(8) control socket
 sdpd_groupname="nobody"		# set spdp(8) user/group to run as after
 sdpd_username="nobody"		# it initializes
 
 bthidd_enable="NO"		# Enable bthidd(8) (or NO)
 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
 bthidd_evdev_support="AUTO"	# AUTO depends on EVDEV_SUPPORT kernel option
 
 rfcomm_pppd_server_enable="NO"	# Enable rfcomm_pppd(8) in server mode (or NO)
 rfcomm_pppd_server_profile="one two"	# Profile to use from /etc/ppp/ppp.conf
 #
 #rfcomm_pppd_server_one_bdaddr=""	# Override local bdaddr for 'one'
 rfcomm_pppd_server_one_channel="1"	# Override local channel for 'one'
 #rfcomm_pppd_server_one_register_sp="NO"	# Override SP and DUN register
 #rfcomm_pppd_server_one_register_dun="NO"	# for 'one'
 #
 #rfcomm_pppd_server_two_bdaddr=""	# Override local bdaddr for 'two'
 rfcomm_pppd_server_two_channel="3"	# Override local channel for 'two'
 #rfcomm_pppd_server_two_register_sp="NO"	# Override SP and DUN register
 #rfcomm_pppd_server_two_register_dun="NO"	# for 'two'
 
 ubthidhci_enable="NO"		# Switch an USB BT controller present on
 #ubthidhci_busnum="3"		# bus 3 and addr 2 from HID mode to HCI mode.
 #ubthidhci_addr="2"		# Check usbconfig list to find the correct
 				# numbers for your system.
 
 ### Network link/usability verification options
 netwait_enable="NO"		# Enable rc.d/netwait (or NO)
 #netwait_ip=""			# Wait for ping response from any IP in this list.
 netwait_timeout="60"		# Total number of seconds to perform pings.
 #netwait_if=""			# Wait for active link on each intf in this list.
 netwait_if_timeout="30"		# Total number of seconds to monitor link state.
 
 ### Miscellaneous network options: ###
 icmp_bmcastecho="NO"	# respond to broadcast ping packets
 
 ### IPv6 options: ###
 ipv6_network_interfaces="auto"	# List of IPv6 network interfaces
 				# (or "auto" or "none").
 ipv6_activate_all_interfaces="NO"	# If NO, interfaces which have no
 					# corresponding $ifconfig_IF_ipv6 is
 					# marked as IFDISABLED for security
 					# reason.
 ipv6_defaultrouter="NO"		# Set to IPv6 default gateway (or NO).
 #ipv6_defaultrouter="2002:c058:6301::"	# Use this for 6to4 (RFC 3068)
 ipv6_static_routes=""		# Set to static route list (or leave empty).
 #ipv6_static_routes="xxx"	# An example to set fec0:0000:0000:0006::/64
 				#  route toward loopback interface.
 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
 ipv6_gateway_enable="NO"	# Set to YES if this host will be a gateway.
 ipv6_cpe_wanif="NO"		# Set to the upstream interface name if this
 				# node will work as a router to forward IPv6
 				# packets not explicitly addressed to itself.
 ipv6_privacy="NO"		# Use privacy address on RA-receiving IFs
 				# (RFC 4941)
 
 route6d_enable="NO"		# Set to YES to enable an IPv6 routing daemon.
 route6d_program="/usr/sbin/route6d"	# Name of IPv6 routing daemon.
 route6d_flags=""		# Flags to IPv6 routing daemon.
 #route6d_flags="-l"		# Example for route6d with only IPv6 site local
 				# addrs.
 #route6d_flags="-q"		# If you want to run a routing daemon on an end
 				# node, you should stop advertisement.
 #ipv6_network_interfaces="em0 em1"	# Examples for router
 					# or static configuration for end node.
 					# Choose correct prefix value.
 #ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
 #ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
 ipv6_default_interface="NO"	# Default output interface for scoped addrs.
 				# This works only with
 				# ipv6_gateway_enable="NO".
 rtsol_flags=""			# Flags to IPv6 router solicitation.
 rtsold_enable="NO"		# Set to YES to enable an IPv6 router
 				# solicitation daemon.
 rtsold_flags="-a"		# Flags to an IPv6 router solicitation
 				# daemon.
 rtadvd_enable="NO"		# Set to YES to enable an IPv6 router
 				# advertisement daemon. If set to YES,
 				# this router becomes a possible candidate
 				# IPv6 default router for local subnets.
 rtadvd_interfaces=""		# Interfaces rtadvd sends RA packets.
 stf_interface_ipv4addr=""	# Local IPv4 addr for 6to4 IPv6 over IPv4
 				# tunneling interface. Specify this entry
 				# to enable 6to4 interface.
 stf_interface_ipv4plen="0"	# Prefix length for 6to4 IPv4 addr,
 				# to limit peer addr range. Effective value
 				# is 0-31.
 stf_interface_ipv6_ifid="0:0:0:1"	# IPv6 interface id for stf0.
 				# If you like, you can set "AUTO" for this.
 stf_interface_ipv6_slaid="0000"	# IPv6 Site Level Aggregator for stf0
 ipv6_ipv4mapping="NO"		# Set to "YES" to enable IPv4 mapped IPv6 addr
 				# communication. (like ::ffff:a.b.c.d)
-ipv6_ipfilter_rules="/etc/ipf6.rules"	# rules definition file for ipfilter,
-					# see /usr/src/contrib/ipfilter/rules
-					# for examples
 ip6addrctl_enable="YES"	# Set to YES to enable default address selection
 ip6addrctl_verbose="NO"	# Set to YES to enable verbose configuration messages
 ip6addrctl_policy="AUTO"	# A pre-defined address selection policy
 				# (ipv4_prefer, ipv6_prefer, or AUTO)
 
 ##############################################################
 ###  System console options  #################################
 ##############################################################
 
 keyboard=""		# keyboard device to use (default /dev/kbd0).
 keymap="NO"		# keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
 keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
 keybell="NO" 		# See kbdcontrol(1) for options.  Use "off" to disable.
 keychange="NO"		# function keys default values (or NO).
 cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
 scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
 font8x16="NO"		# font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
 font8x14="NO"		# font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
 font8x8="NO"		# font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
 blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
 saver="NO"		# screen saver: Uses /boot/kernel/${saver}_saver.ko
 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
 			       # specifically overriden in rc.conf(5).
 moused_enable="NO"	# Run the mouse daemon.
 moused_type="auto"	# See man page for rc.conf(5) for available settings.
 moused_port="/dev/psm0"	# Set to your mouse port.
 moused_flags=""		# Any additional flags to moused.
 mousechar_start="NO"	# if 0xd0-0xd3 default range is occupied in your
 			# language code table, specify alternative range
 			# start like mousechar_start=3, see vidcontrol(1)
 allscreens_flags=""	# Set this vidcontrol mode for all virtual screens
 allscreens_kbdflags=""	# Set this kbdcontrol mode for all virtual screens
 
 ##############################################################
 ###  Mail Transfer Agent (MTA) options  ######################
 ##############################################################
 
 mta_start_script="/etc/rc.sendmail"
 			# Script to start your chosen MTA, called by /etc/rc.
 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
 sendmail_enable="NO"	# Run the sendmail inbound daemon (YES/NO).
 sendmail_pidfile="/var/run/sendmail.pid"	# sendmail pid file
 sendmail_procname="/usr/sbin/sendmail"		# sendmail process name
 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
 sendmail_cert_create="YES"	# Create a server certificate if none (YES/NO)
 #sendmail_cert_cn="CN"   	# CN of the generate certificate
 sendmail_submit_enable="YES"	# Start a localhost-only MTA for mail submission
 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
 				# Flags for localhost-only MTA
 sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
 sendmail_msp_queue_enable="YES"	# Dequeue stuck clientmqueue mail (YES/NO).
 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
 				# Flags for sendmail_msp_queue daemon.
 sendmail_rebuild_aliases="NO"	# Run newaliases if necessary (YES/NO).
 
 
 ##############################################################
 ###  Miscellaneous administrative options  ###################
 ##############################################################
 
 auditd_enable="NO"	# Run the audit daemon.
 auditd_program="/usr/sbin/auditd"	# Path to the audit daemon.
 auditd_flags=""		# Which options to pass to the audit daemon.
 auditdistd_enable="NO"	# Run the audit daemon.
 auditdistd_program="/usr/sbin/auditdistd"	# Path to the auditdistd daemon.
 auditdistd_flags=""	# Which options to pass to the auditdistd daemon.
 cron_enable="YES"	# Run the periodic job daemon.
 cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
 cron_dst="YES"		# Handle DST transitions intelligently (YES/NO)
 cron_flags=""		# Which options to pass to the cron daemon.
 cfumass_enable="NO"	# Create default LUN for cfumass(4).
 cfumass_dir="/var/cfumass"	# File to LUN's contents.
 cfumass_image="/var/tmp/cfumass.img"	# LUN's backing file path.
 lpd_enable="NO"		# Run the line printer daemon.
 lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
 lpd_flags=""		# Flags to lpd (if enabled).
 nscd_enable="NO"	# Run the nsswitch caching daemon.
 chkprintcap_enable="NO"	# Run chkprintcap(8) before running lpd.
 chkprintcap_flags="-d"	# Create missing directories by default.
 dumpdev="AUTO"		# Device to crashdump to (device name, AUTO, or NO).
 dumpon_flags=""		# Options to pass to dumpon(8), followed by dumpdev.
 dumpdir="/var/crash"	# Directory where crash dumps are to be stored
 savecore_enable="YES"	# Extract core from dump devices if any
 savecore_flags="-m 10"	# Used if dumpdev is enabled above, and present.
 			# By default, only the 10 most recent kernel dumps
 			# are saved.
 service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files.
 crashinfo_enable="YES"	# Automatically generate crash dump summary.
 crashinfo_program="/usr/sbin/crashinfo"	# Script to generate crash dump summary.
 quota_enable="NO"	# turn on quotas on startup (or NO).
 check_quotas="YES"	# Check quotas on startup (or NO).
 quotaon_flags="-a"	# Turn quotas on for all file systems (if enabled)
 quotaoff_flags="-a"	# Turn quotas off for all file systems at shutdown
 quotacheck_flags="-a"	# Check all file system quotas (if enabled)
 accounting_enable="NO"	# Turn on process accounting (or NO).
 firstboot_sentinel="/firstboot"	# Scripts with "firstboot" keyword are run if
 			# this file exists.  Should be on a R/W filesystem so
 			# the file can be deleted after the boot completes.
 sysvipc_enable="NO"	# Load System V IPC primitives at startup (or NO).
 linux_enable="NO"	# Linux binary compatibility loaded at startup (or NO).
 linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific
 			# filesystems at startup.
 clear_tmp_enable="NO"	# Clear /tmp at startup.
 clear_tmp_X="YES" 	# Clear and recreate X11-related directories in /tmp
 ldconfig_insecure="NO"	# Set to YES to disable ldconfig security checks
 ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg"
 			# shared library search paths
 ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
 			# 32-bit compatibility shared library search paths
 ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat ${_localbase}/libsoft"
 			# soft float compatibility shared library search paths
 			# Note: temporarily with extra stuff for transition
 ldconfig_local_dirs="${_localbase}/libdata/ldconfig"
 			# Local directories with ldconfig configuration files.
 ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32"
 			# Local directories with 32-bit compatibility ldconfig
 			# configuration files.
 ldconfig_localsoft_dirs="${_localbase}/libdata/ldconfigsoft"
 			# Local directories with soft float compatibility ldconfig
 			# configuration files.
 kern_securelevel_enable="NO"	# kernel security level (see security(7))
 kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
 			# Note that setting securelevel to 0 will result
 			# in the system booting with securelevel set to 1, as
 			# init(8) will raise the level when rc(8) completes.
 update_motd="YES"	# update version info in /etc/motd (or NO)
 entropy_boot_file="/boot/entropy"	# Set to NO to disable very early
 			# (used at early boot time) entropy caching through reboots.
 entropy_file="/entropy"	# Set to NO to disable late (used when going multi-user)
 			# entropy through reboots.
 			# /var/db/entropy-file is preferred if / is not avail.
 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
 entropy_save_sz="4096"	# Size of the entropy cache files.
 entropy_save_num="8"	# Number of entropy cache files to save.
 harvest_mask="511"	# Entropy device harvests all but the very invasive sources.
 			# (See 'sysctl kern.random.harvest' and random(4))
 osrelease_enable="YES"	# Update /var/run/os-release on boot (or NO).
 osrelease_file="/var/run/os-release" # File to update for os-release.
 osrelease_perms="444"	# Default permission for os-release file.
 dmesg_enable="YES"	# Save dmesg(8) to /var/run/dmesg.boot
 watchdogd_enable="NO"	# Start the software watchdog daemon
 watchdogd_flags=""	# Flags to watchdogd (if enabled)
 watchdogd_timeout=""	# watchdogd timeout, overrides -t in watchdogd_flags
 watchdogd_shutdown_timeout=""	# Timeout to use after watchdogd is stopped.
 				# Has effect only for system shutdown.
 				# Overrides -x in watchdogd_flags.
 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
 							    # devfs(8) rules.
 devfs_system_ruleset=""	# The name (NOT number) of a ruleset to apply to /dev
 devfs_set_rulesets=""	# A list of /mount/dev=ruleset_name settings to
 			# apply (must be mounted already, i.e. fstab(5))
 devfs_load_rulesets="YES"	# Enable to always load the default rulesets
 performance_cx_lowest="NONE"	# Online CPU idle state
 performance_cpu_freq="NONE"	# Online CPU frequency
 economy_cx_lowest="Cmax"	# Offline CPU idle state
 economy_cpu_freq="NONE"		# Offline CPU frequency
 virecover_enable="YES"	# Perform housekeeping for the vi(1) editor
 ugidfw_enable="NO"	# Load mac_bsdextended(4) rules on boot
 bsdextended_script="/etc/rc.bsdextended"	# Default mac_bsdextended(4)
 						# ruleset file.
 newsyslog_enable="YES"	# Run newsyslog at startup.
 newsyslog_flags="-CN"	# Newsyslog flags to create marked files
 mixer_enable="YES"	# Run the sound mixer.
 opensm_enable="NO"	# Opensm(8) for infiniband devices defaults to off
 
 # rctl(8) requires kernel options RACCT and RCTL
 rctl_enable="YES"		# Load rctl(8) rules on boot
 rctl_rules="/etc/rctl.conf"	# rctl(8) ruleset. See rctl.conf(5).
 
 iovctl_files=""		# Config files for iovctl(8)
 
 ##############################################################
 ### Jail Configuration (see rc.conf(5) manual page) ##########
 ##############################################################
 jail_enable="NO"	# Set to NO to disable starting of any jails
 jail_conf="/etc/jail.conf"	# Configuration file for jail(8)
 jail_confwarn="YES"	# Prevent warning about obsolete per-jail configuration
 jail_parallel_start="NO"	# Start jails in the background
 jail_list=""		# Space separated list of names of jails
 jail_reverse_stop="NO"	# Stop jails in reverse order
 
 ##############################################################
 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
 ### scripts to source rc_conf_files overrides safely.	    ##
 ##############################################################
 
 if [ -z "${source_rc_confs_defined}" ]; then
 	source_rc_confs_defined=yes
 	source_rc_confs() {
 		local i sourced_files
 		for i in ${rc_conf_files}; do
 			case ${sourced_files} in
 			*:$i:*)
 				;;
 			*)
 				sourced_files="${sourced_files}:$i:"
 				if [ -r $i ]; then
 					. $i
 				fi
 				;;
 			esac
 		done
 		# Re-do process to pick up [possibly] redefined $rc_conf_files
 		for i in ${rc_conf_files}; do
 			case ${sourced_files} in
 			*:$i:*)
 				;;
 			*)
 				sourced_files="${sourced_files}:$i:"
 				if [ -r $i ]; then
 					. $i
 				fi
 				;;
 			esac
 		done
 	}
 fi
 
 # Allow vendors to override FreeBSD defaults in /etc/default/rc.conf
 # without the need to carefully manage /etc/rc.conf.
 if [ -r /etc/defaults/vendor.conf ]; then
 	. /etc/defaults/vendor.conf
 fi
diff --git a/libexec/rc/rc.d/ipfilter b/libexec/rc/rc.d/ipfilter
index fe328308e622..abe49c919656 100755
--- a/libexec/rc/rc.d/ipfilter
+++ b/libexec/rc/rc.d/ipfilter
@@ -1,91 +1,80 @@
 #!/bin/sh
 #
 # $FreeBSD$
 #
 
 # PROVIDE: ipfilter
 # REQUIRE: FILESYSTEMS
 # BEFORE: ipmon ipnat netif netwait securelevel
 # KEYWORD: nojailvnet
 
 . /etc/rc.subr
 
 name="ipfilter"
 desc="IP packet filter"
 rcvar="ipfilter_enable"
 load_rc_config $name
-stop_precmd="test -f ${ipfilter_rules} -o -f ${ipv6_ipfilter_rules}"
+stop_precmd="test -f ${ipfilter_rules}"
 
 start_precmd="$stop_precmd"
 start_cmd="ipfilter_start"
 stop_cmd="ipfilter_stop"
 reload_precmd="$stop_precmd"
 reload_cmd="ipfilter_reload"
 resync_precmd="$stop_precmd"
 resync_cmd="ipfilter_resync"
 status_precmd="$stop_precmd"
 status_cmd="ipfilter_status"
 extra_commands="reload resync"
 required_modules="ipl:ipfilter"
 
 ipfilter_start()
 {
 	echo "Enabling ipfilter."
 	if ! ${ipfilter_program:-/sbin/ipf} -V | grep -q 'Running: yes'; then
 		${ipfilter_program:-/sbin/ipf} -E
 	fi
 	${ipfilter_program:-/sbin/ipf} -Fa
 	if [ -r "${ipfilter_rules}" ]; then
 		${ipfilter_program:-/sbin/ipf} \
 		    -f "${ipfilter_rules}" ${ipfilter_flags}
 	fi
-	if [ -r "${ipv6_ipfilter_rules}" ]; then
-		${ipfilter_program:-/sbin/ipf} -6 \
-		    -f "${ipv6_ipfilter_rules}" ${ipfilter_flags}
-	fi
 }
 
 ipfilter_stop()
 {
 	if ${ipfilter_program:-/sbin/ipf} -V | grep -q 'Running: yes'; then
 		echo "Saving firewall state tables"
 		${ipfs_program:-/sbin/ipfs} -W ${ipfs_flags}
 		echo "Disabling ipfilter."
 		${ipfilter_program:-/sbin/ipf} -D
 	fi
 }
 
 ipfilter_reload()
 {
 	echo "Reloading ipfilter rules."
 
 	${ipfilter_program:-/sbin/ipf} -I -Fa
 	if [ -r "${ipfilter_rules}" ]; then
 		${ipfilter_program:-/sbin/ipf} -I \
 		    -f "${ipfilter_rules}" ${ipfilter_flags}
 		if [ $? -ne 0 ]; then
 			err 1 'Load of rules into alternate set failed; aborting reload'
 		fi
 	fi
-	if [ -r "${ipv6_ipfilter_rules}" ]; then
-		${ipfilter_program:-/sbin/ipf} -I -6 \
-		    -f "${ipv6_ipfilter_rules}" ${ipfilter_flags}
-		if [ $? -ne 0 ]; then
-			err 1 'Load of IPv6 rules into alternate set failed; aborting reload'
-		fi
-	fi
 	${ipfilter_program:-/sbin/ipf} -s
 
 }
 
 ipfilter_resync()
 {
 	${ipfilter_program:-/sbin/ipf} -y ${ipfilter_flags}
 }
 
 ipfilter_status()
 {
 	${ipfilter_program:-/sbin/ipf} -V
 }
 
 run_rc_command "$1"