diff --git a/etc/mtree/BSD.root.dist b/etc/mtree/BSD.root.dist index 41a68c27aa7a..cba3e9e73c79 100644 --- a/etc/mtree/BSD.root.dist +++ b/etc/mtree/BSD.root.dist @@ -1,122 +1,124 @@ # $FreeBSD$ # # Please see the file src/etc/mtree/README before making changes to this file. # /set type=dir uname=root gname=wheel mode=0755 . bin .. boot defaults .. dtb allwinner tags=package=runtime .. overlays tags=package=runtime .. rockchip tags=package=runtime .. .. firmware .. + loader.conf.d tags=package=bootloader + .. lua .. kernel .. modules .. zfs .. .. dev mode=0555 .. etc X11 .. autofs .. bluetooth .. cron.d .. defaults .. devd .. dma .. gss .. mail .. mtree .. newsyslog.conf.d .. ntp mode=0700 .. pam.d .. periodic daily .. monthly .. security .. weekly .. .. pkg .. ppp .. rc.conf.d .. rc.d .. security .. ssh .. ssl .. syslog.d .. zfs .. .. lib casper .. geom .. nvmecontrol .. .. libexec resolvconf .. .. media .. mnt .. net .. proc mode=0555 .. rescue .. root .. sbin .. tmp mode=01777 .. usr .. var .. .. diff --git a/stand/defaults/loader.conf b/stand/defaults/loader.conf index 4f84281e9d2e..a1eb189db7ac 100644 --- a/stand/defaults/loader.conf +++ b/stand/defaults/loader.conf @@ -1,176 +1,177 @@ # This is loader.conf - a file full of useful variables that you can # set to change the default load behavior of your system. You should # not edit this file! Put any overrides into one of the # loader_conf_files instead and you will be able to update these # defaults later without spamming your local configuration information. # # All arguments must be in double quotes. # # $FreeBSD$ ### Basic configuration options ############################ exec="echo Loading /boot/defaults/loader.conf" kernel="kernel" # /boot sub-directory containing kernel and modules bootfile="kernel" # Kernel name (possibly absolute path) kernel_options="" # Flags to be passed to the kernel loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" +loader_conf_dirs="/boot/loader.conf.d" nextboot_conf="/boot/nextboot.conf" nextboot_enable="NO" verbose_loading="NO" # Set to YES for verbose loader output ### Splash screen configuration ############################ splash_bmp_load="NO" # Set this to YES for bmp splash screen! splash_pcx_load="NO" # Set this to YES for pcx splash screen! splash_txt_load="NO" # Set this to YES for TheDraw splash screen! vesa_load="NO" # Set this to YES to load the vesa module bitmap_load="NO" # Set this to YES if you want splash screen! bitmap_name="splash.bmp" # Set this to the name of the file bitmap_type="splash_image_data" # and place it on the module_path ### Screen saver modules ################################### # This is best done in rc.conf screensave_load="NO" # Set to YES to load a screensaver module screensave_name="green_saver" # Set to the name of the screensaver module ### Early hostid configuration ############################ hostuuid_load="YES" hostuuid_name="/etc/hostid" hostuuid_type="hostuuid" ### Random number generator configuration ################## # See rc.conf(5). The entropy_boot_file config variable must agree with the # settings below. entropy_cache_load="YES" # Set this to NO to disable loading # entropy at boot time entropy_cache_name="/boot/entropy" # Set this to the name of the file entropy_cache_type="boot_entropy_cache" # Required for the kernel to find # the boot-time entropy cache. This # must not change value even if the # _name above does change! ### RAM Blacklist configuration ############################ ram_blacklist_load="NO" # Set this to YES to load a file # containing a list of addresses to # exclude from the running system. ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file ram_blacklist_type="ram_blacklist" # Required for the kernel to find # the blacklist module ### Microcode loading configuration ######################## cpu_microcode_load="NO" # Set this to YES to load and apply a # microcode update file during boot. cpu_microcode_name="/boot/firmware/ucode.bin" # Set this to the microcode # update file path. cpu_microcode_type="cpu_microcode" # Required for the kernel to find # the microcode update file. ### ACPI settings ########################################## acpi_dsdt_load="NO" # DSDT Overriding acpi_dsdt_type="acpi_dsdt" # Don't change this acpi_dsdt_name="/boot/acpi_dsdt.aml" # Override DSDT in BIOS by this file acpi_video_load="NO" # Load the ACPI video extension driver ### Audit settings ######################################### audit_event_load="NO" # Preload audit_event config audit_event_name="/etc/security/audit_event" audit_event_type="etc_security_audit_event" ### Initial memory disk settings ########################### #mdroot_load="YES" # The "mdroot" prefix is arbitrary. #mdroot_type="md_image" # Create md(4) disk at boot. #mdroot_name="/boot/root.img" # Path to a file containing the image. #rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device. ### Loader settings ######################################## #loader_delay="3" # Delay in seconds before loading anything. # Default is unset and disabled (no delay). #autoboot_delay="10" # Delay in seconds before autobooting, # -1 for no user interrupts, NO to disable #password="" # Prevent changes to boot options #bootlock_password="" # Prevent booting (see check-password.4th(8)) #geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments #beastie_disable="NO" # Turn the beastie boot menu on and off efi_max_resolution="1x1" # Set the max resolution for EFI loader to use: # 480p, 720p, 1080p, 2160p/4k, 5k, or specify # WidthxHeight (e.g. 1920x1080) #kernels="kernel kernel.old" # Kernels to display in the boot menu kernels_autodetect="YES" # Auto-detect kernel directories in /boot #loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none #comconsole_speed="9600" # Set the current serial console speed #console="vidconsole" # A comma separated list of console(s) #currdev="disk1s1a" # Set the current device module_path="/boot/modules;/boot/dtb;/boot/dtb/overlays" # Set the module search path module_blacklist="drm drm2 radeonkms i915kms amdgpu" # Loader module blacklist #prompt="\\${interpret}" # Set the command prompt #root_disk_unit="0" # Force the root disk unit number #rootdev="disk1s1a" # Set the root filesystem #dumpdev="disk1s1b" # Set a dump device early in the boot process #tftp.blksize="1428" # Set the RFC 2348 TFTP block size. # If the TFTP server does not support RFC 2348, # the block size is set to 512. Valid: (8,9007) #twiddle_divisor="1" # >1 means slow down the progress indicator. ### Kernel settings ######################################## # The following boot_ variables are enabled by setting them to any value. # Their presence in the kernel environment (see kenv(1)) has the same # effect as setting the given boot flag (see boot(8)). #boot_askname="" # -a: Prompt the user for the name of the root device #boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM #boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger #boot_dfltroot="" # -r: Use the statically configured root file system #boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger #boot_multicons="" # -D: Use multiple consoles #boot_mute="" # -m: Mute the console #boot_pause="" # -p: Pause after each line during device probing #boot_serial="" # -h: Use serial console #boot_single="" # -s: Start system in single-user mode #boot_verbose="" # -v: Causes extra debugging information to be printed #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" # Sets the list of init candidates #init_shell="/bin/sh" # The shell binary used by init(8). #init_script="" # Initial script to run by init(8) before chrooting. #init_chroot="" # Directory for init(8) to chroot into. ### Kernel tunables ######################################## #hw.physmem="1G" # Limit physical memory. See loader(8) #kern.dfldsiz="" # Set the initial data size limit #kern.dflssiz="" # Set the initial stack size limit #kern.hz="100" # Set the kernel interval timer rate #kern.maxbcache="" # Set the max buffer cache KVA storage #kern.maxdsiz="" # Set the max data size #kern.maxfiles="" # Set the sys. wide open files limit #kern.maxproc="" # Set the maximum # of processes #kern.maxssiz="" # Set the max stack size #kern.maxswzone="" # Set the max swmeta KVA storage #kern.maxtsiz="" # Set the max text size #kern.maxusers="32" # Set size of various static tables #kern.msgbufsize="65536" # Set size of kernel message buffer #kern.nbuf="" # Set the number of buffer headers #kern.ncallout="" # Set the maximum # of timer events #kern.ngroups="1023" # Set the maximum # of supplemental groups #kern.sgrowsiz="" # Set the amount to grow stack #kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus # registration, useful for USB sticks as root #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI #kern.ipc.maxsockets="" # Set the maximum number of sockets available #kern.ipc.nmbclusters="" # Set the number of mbuf clusters #kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE #vfs.root.mountfrom="" # Specify root partition #vm.kmem_size="" # Sets the size of kernel memory (bytes) #debug.kdb.break_to_debugger="0" # Allow console to break into debugger. #debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on #debug.ktr.mask="0x1200" # Bitmask of KTR events to enable #debug.ktr.verbose="1" # Enable console dump of KTR events ### Module loading syntax example ########################## #module_load="YES" # loads module "module" #module_name="realname" # uses "realname" instead of "module" #module_type="type" # passes "-t type" to load #module_flags="flags" # passes "flags" to the module #module_before="cmd" # executes "cmd" before loading the module #module_after="cmd" # executes "cmd" after loading the module #module_error="cmd" # executes "cmd" if load fails diff --git a/stand/defaults/loader.conf.5 b/stand/defaults/loader.conf.5 index 3b31761663e3..3bd83dcc5c30 100644 --- a/stand/defaults/loader.conf.5 +++ b/stand/defaults/loader.conf.5 @@ -1,378 +1,385 @@ .\" Copyright (c) 1999 Daniel C. Sobral .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ -.Dd April 29, 2020 +.Dd December 31, 2020 .Dt LOADER.CONF 5 .Os .Sh NAME .Nm loader.conf .Nd "system bootstrap configuration information" .Sh DESCRIPTION The file .Nm contains descriptive information on bootstrapping the system. Through it you can specify the kernel to be booted, parameters to be passed to it, and additional modules to be loaded; and generally set all variables described in .Xr loader 8 . .Pp .Sh SYNTAX Though .Nm Ns 's format was defined explicitly to resemble .Xr rc.conf 5 , and can be sourced by .Xr sh 1 , some settings are treated in a special fashion. Also, the behavior of some settings is defined by the setting's suffix; the prefix identifies which module the setting controls. .Pp The general parsing rules are: .Bl -bullet .It Spaces and empty lines are ignored. .It A # sign will mark the remainder of the line as a comment. .It Only one setting can be present on each line. .El .Pp All settings have the following format: .Pp .Dl variable="value" .Pp Unless it belongs to one of the classes of settings that receive special treatment, a setting will set the value of a .Xr loader 8 environment variable. The settings that receive special treatment are listed below. Settings beginning with .Qq * below define the modules to be loaded and may have any prefix; the prefix identifies a module. All such settings sharing a common prefix refer to the same module. .Bl -tag -width Ar .It Ar exec Immediately executes a .Xr loader 8 command. This type of setting cannot be processed by programs other than .Xr loader 8 , so its use should be avoided. Multiple instances of it will be processed independently. +.It Ar loader_conf_dirs +Space separated list of directories to process for configuration files. +The lua-based loader will process files with a +.Dq .conf +suffix that are placed in these directories. .It Ar loader_conf_files Defines additional configuration files to be processed right after the present file. .Ar loader_conf_files should be treated as write-only. One cannot depend on any value remaining in the loader environment or carried over into the kernel environment. .It Ar kernel Name of the kernel to be loaded. If no kernel name is set, no additional modules will be loaded. The name must be a subdirectory of .Pa /boot that contains a kernel. .It Ar kernel_options Flags to be passed to the kernel. .It Ar vfs.root.mountfrom Specify the root partition to mount. For example: .Pp .Dl vfs.root.mountfrom="ufs:/dev/da0s1a" .Pp .Xr loader 8 automatically calculates the value of this tunable from .Pa /etc/fstab from the partition the kernel was loaded from. The calculated value might be calculated incorrectly when .Pa /etc/fstab is not available during .Xr loader 8 startup (as during diskless booting from NFS), or if a different device is desired by the user. The preferred value can be set in .Pa /loader.conf . .Pp The value can also be overridden from the .Xr loader 8 command line. This is useful for system recovery when .Pa /etc/fstab is damaged, lost, or read from the wrong partition. .It Ar password Protect boot menu with a password without interrupting .Ic autoboot process. The password should be in clear text format. If a password is set, boot menu will not appear until any key is pressed during countdown period specified by .Va autoboot_delay variable or .Ic autoboot process fails. In both cases user should provide specified password to be able to access boot menu. .It Ar bootlock_password Provides a password to be required by check-password before execution is allowed to continue. The password should be in clear text format. If a password is set, the user must provide specified password to boot. .It Ar verbose_loading If set to .Dq YES , module names will be displayed as they are loaded. .It Ar module_blacklist Blacklist of modules. Modules specified in the blacklist may not be loaded automatically with a .Ar *_load directive, but they may be loaded directly at the .Xr loader 8 prompt. Blacklisted modules may still be loaded indirectly as dependencies of other modules. .It Ar *_load If set to .Dq YES , that module will be loaded. If no name is defined (see below), the module's name is taken to be the same as the prefix. .It Ar *_name Defines the name of the module. .It Ar *_type Defines the module's type. If none is given, it defaults to a kld module. .It Ar *_flags Flags and parameters to be passed to the module. .It Ar *_before Commands to be executed before the module is loaded. Use of this setting should be avoided. .It Ar *_after Commands to be executed after the module is loaded. Use of this setting should be avoided. .It Ar *_error Commands to be executed if the loading of a module fails. Except for the special value .Dq abort , which aborts the bootstrap process, use of this setting should be avoided. .El .Pp .Em WARNING: developers should never use these suffixes for any kernel environment variables (tunables) or conflicts will result. .Sh DEFAULT SETTINGS Most of .Nm Ns 's default settings can be ignored. The few of them which are important or useful are: .Bl -tag -width bootfile -offset indent .It Va bitmap_load .Pq Dq NO If set to .Dq YES , a bitmap will be loaded to be displayed on screen while booting. .It Va bitmap_name .Pq Dq Pa /boot/splash.bmp Name of the bitmap to be loaded. Any other name can be used. .It Va comconsole_speed .Dq ( 9600 or the value of the .Va BOOT_COMCONSOLE_SPEED variable when .Xr loader 8 was compiled). Sets the speed of the serial console. If the previous boot loader stage specified that a serial console is in use then the default speed is determined from the current serial port speed setting. .It Va console .Pq Dq vidconsole .Dq comconsole selects serial console, .Dq vidconsole selects the video console, .Dq nullconsole selects a mute console (useful for systems with neither a video console nor a serial port), and .Dq spinconsole selects the video console which prevents any input and hides all output replacing it with .Dq spinning character (useful for embedded products and such). .It Va efi_max_resolution Specify the maximum desired resolution for the EFI console. The following values are accepted: .Bl -column "WidthxHeight" .It Sy Value Ta Sy Resolution .It 480p Ta 640x480 .It 720p Ta 1280x720 .It 1080p Ta 1920x1080 .It 2160p Ta 3840x2160 .It 4k Ta 3840x2160 .It 5k Ta 5120x2880 .It Va Width Ns x Ns Va Height Ta Va Width Ns x Ns Va Height .El .It Va kernel .Pq Dq kernel .It Va kernels .Pq Dq kernel kernel.old Space or comma separated list of kernels to present in the boot menu. .It Va loader_conf_files .Pq Dq Pa /boot/loader.conf /boot/loader.conf.local +.It Va loader_conf_dirs +.Pq Dq Pa /boot/loader.conf.d .It Va splash_bmp_load .Pq Dq NO If set to .Dq YES , will load the splash screen module, making it possible to display a bmp image on the screen while booting. .It Va splash_pcx_load .Pq Dq NO If set to .Dq YES , will load the splash screen module, making it possible to display a pcx image on the screen while booting. .It Va vesa_load .Pq Dq NO If set to .Dq YES , the vesa module will be loaded, enabling bitmaps above VGA resolution to be displayed. .It Va beastie_disable If set to .Dq YES , the beastie boot menu will be skipped. .It Va loader_logo Pq Dq Li orbbw Selects a desired logo in the beastie boot menu. Possible values are: .Dq Li orbbw , .Dq Li orb , .Dq Li fbsdbw , .Dq Li beastiebw , .Dq Li beastie , and .Dq Li none . .It Va loader_color If set to .Dq NO , the beastie boot menu will be displayed without ANSI coloring. .It Va entropy_cache_load .Pq Dq YES If set to .Dq NO , the very early boot-time entropy file will not be loaded. See the entropy entries in .Xr rc.conf 5 . .It Va entropy_cache_name .Pq Dq /boot/entropy The name of the very early boot-time entropy cache file. .It Va cpu_microcode_load .Pq Dq NO If set to .Dq YES , the microcode update file specified by .Va cpu_microcode_name will be loaded and applied very early during boot. This provides functionality similar to .Xr cpucontrol 8 but ensures that CPU features enabled by microcode updates can be used by the kernel. The update will be re-applied automatically when resuming from an ACPI sleep state. If the update file contains updates for multiple processor models, the kernel will search for and extract a matching update. Currently this setting is supported only on Intel .Dv i386 and .Dv amd64 processors. It has no effect on other processor types. .It Va cpu_microcode_name A path to a microcode update file. .El .Sh OTHER SETTINGS Other settings that may be used in .Nm that have no default value: .Bl -tag -width bootfile -offset indent .It Va fdt_overlays Specifies a comma-delimited list of FDT overlays to apply. .Pa /boot/dtb/overlays is created by default for overlays to be placed in. .It Va kernels_autodetect If set to .Dq YES , attempt to auto-detect kernels installed in .Pa /boot . This is an option specific to the Lua-based loader. It is not available in the default Forth-based loader. .El .Sh FILES .Bl -tag -width /boot/defaults/loader.conf -compact .It Pa /boot/defaults/loader.conf default settings -- do not change this file. .It Pa /boot/loader.conf user defined settings. .It Pa /boot/loader.conf.local machine-specific settings for sites with a common loader.conf. .El .Sh SEE ALSO .Xr rc.conf 5 , .Xr boot 8 , .Xr cpucontrol 8 , .Xr loader 8 , .Xr loader.4th 8 .Sh HISTORY The file .Nm first appeared in .Fx 3.2 . .Sh AUTHORS This manual page was written by .An Daniel C. Sobral Aq dcs@FreeBSD.org . .Sh BUGS The .Xr loader 8 stops reading .Nm when it encounters a syntax error, so any options which are vital for booting a particular system (i.e.\& .Dq Va hw.ata.ata_dma Ns "=0" ) should precede any experimental additions to .Nm . diff --git a/stand/lua/config.lua b/stand/lua/config.lua index 5b554806fc9f..683490cfd23d 100644 --- a/stand/lua/config.lua +++ b/stand/lua/config.lua @@ -1,726 +1,750 @@ -- -- SPDX-License-Identifier: BSD-2-Clause-FreeBSD -- -- Copyright (c) 2015 Pedro Souza -- Copyright (C) 2018 Kyle Evans -- All rights reserved. -- -- Redistribution and use in source and binary forms, with or without -- modification, are permitted provided that the following conditions -- are met: -- 1. Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- 2. Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- -- THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -- SUCH DAMAGE. -- -- $FreeBSD$ -- local hook = require("hook") local config = {} local modules = {} local carousel_choices = {} -- Which variables we changed local env_changed = {} -- Values to restore env to (nil to unset) local env_restore = {} +local MSG_FAILDIR = "Failed to load conf dir '%s': not a directory" local MSG_FAILEXEC = "Failed to exec '%s'" local MSG_FAILSETENV = "Failed to '%s' with value: %s" local MSG_FAILOPENCFG = "Failed to open config: '%s'" local MSG_FAILREADCFG = "Failed to read config: '%s'" local MSG_FAILPARSECFG = "Failed to parse config: '%s'" local MSG_FAILEXBEF = "Failed to execute '%s' before loading '%s'" local MSG_FAILEXAF = "Failed to execute '%s' after loading '%s'" local MSG_MALFORMED = "Malformed line (%d):\n\t'%s'" local MSG_DEFAULTKERNFAIL = "No kernel set, failed to load from module_path" local MSG_KERNFAIL = "Failed to load kernel '%s'" local MSG_XENKERNFAIL = "Failed to load Xen kernel '%s'" local MSG_XENKERNLOADING = "Loading Xen kernel..." local MSG_KERNLOADING = "Loading kernel..." local MSG_MODLOADING = "Loading configured modules..." local MSG_MODBLACKLIST = "Not loading blacklisted module '%s'" local MODULEEXPR = '([%w-_]+)' local QVALEXPR = "\"([%w%s%p]-)\"" local QVALREPL = QVALEXPR:gsub('%%', '%%%%') local WORDEXPR = "([%w]+)" local WORDREPL = WORDEXPR:gsub('%%', '%%%%') -- Entries that should never make it into the environment; each one should have -- a documented reason for its existence, and these should all be implementation -- details of the config module. local loader_env_restricted_table = { -- loader_conf_files should be considered write-only, and consumers -- should not rely on any particular value; it's a loader implementation -- detail. Moreover, it's not a particularly useful variable to have in -- the kenv. Save the overhead, let it get fetched other ways. loader_conf_files = true, } local function restoreEnv() -- Examine changed environment variables for k, v in pairs(env_changed) do local restore_value = env_restore[k] if restore_value == nil then -- This one doesn't need restored for some reason goto continue end local current_value = loader.getenv(k) if current_value ~= v then -- This was overwritten by some action taken on the menu -- most likely; we'll leave it be. goto continue end restore_value = restore_value.value if restore_value ~= nil then loader.setenv(k, restore_value) else loader.unsetenv(k) end ::continue:: end env_changed = {} env_restore = {} end -- XXX This getEnv/setEnv should likely be exported at some point. We can save -- the call back into loader.getenv for any variable that's been set or -- overridden by any loader.conf using this implementation with little overhead -- since we're already tracking the values. local function getEnv(key) if loader_env_restricted_table[key] ~= nil or env_changed[key] ~= nil then return env_changed[key] end return loader.getenv(key) end local function setEnv(key, value) env_changed[key] = value if loader_env_restricted_table[key] ~= nil then return 0 end -- Track the original value for this if we haven't already if env_restore[key] == nil then env_restore[key] = {value = loader.getenv(key)} end return loader.setenv(key, value) end -- name here is one of 'name', 'type', flags', 'before', 'after', or 'error.' -- These are set from lines in loader.conf(5): ${key}_${name}="${value}" where -- ${key} is a module name. local function setKey(key, name, value) if modules[key] == nil then modules[key] = {} end modules[key][name] = value end -- Escapes the named value for use as a literal in a replacement pattern. -- e.g. dhcp.host-name gets turned into dhcp%.host%-name to remove the special -- meaning. local function escapeName(name) return name:gsub("([%p])", "%%%1") end local function processEnvVar(value) for name in value:gmatch("${([^}]+)}") do local replacement = loader.getenv(name) or "" value = value:gsub("${" .. escapeName(name) .. "}", replacement) end for name in value:gmatch("$([%w%p]+)%s*") do local replacement = loader.getenv(name) or "" value = value:gsub("$" .. escapeName(name), replacement) end return value end local function checkPattern(line, pattern) local function _realCheck(_line, _pattern) return _line:match(_pattern) end if pattern:find('$VALUE') then local k, v, c k, v, c = _realCheck(line, pattern:gsub('$VALUE', QVALREPL)) if k ~= nil then return k,v, c end return _realCheck(line, pattern:gsub('$VALUE', WORDREPL)) else return _realCheck(line, pattern) end end -- str in this table is a regex pattern. It will automatically be anchored to -- the beginning of a line and any preceding whitespace will be skipped. The -- pattern should have no more than two captures patterns, which correspond to -- the two parameters (usually 'key' and 'value') that are passed to the -- process function. All trailing characters will be validated. Any $VALUE -- token included in a pattern will be tried first with a quoted value capture -- group, then a single-word value capture group. This is our kludge for Lua -- regex not supporting branching. -- -- We have two special entries in this table: the first is the first entry, -- a full-line comment. The second is for 'exec' handling. Both have a single -- capture group, but the difference is that the full-line comment pattern will -- match the entire line. This does not run afoul of the later end of line -- validation that we'll do after a match. However, the 'exec' pattern will. -- We document the exceptions with a special 'groups' index that indicates -- the number of capture groups, if not two. We'll use this later to do -- validation on the proper entry. -- local pattern_table = { { str = "(#.*)", process = function(_, _) end, groups = 1, }, -- module_load="value" { str = MODULEEXPR .. "_load%s*=%s*$VALUE", process = function(k, v) if modules[k] == nil then modules[k] = {} end modules[k].load = v:upper() end, }, -- module_name="value" { str = MODULEEXPR .. "_name%s*=%s*$VALUE", process = function(k, v) setKey(k, "name", v) end, }, -- module_type="value" { str = MODULEEXPR .. "_type%s*=%s*$VALUE", process = function(k, v) setKey(k, "type", v) end, }, -- module_flags="value" { str = MODULEEXPR .. "_flags%s*=%s*$VALUE", process = function(k, v) setKey(k, "flags", v) end, }, -- module_before="value" { str = MODULEEXPR .. "_before%s*=%s*$VALUE", process = function(k, v) setKey(k, "before", v) end, }, -- module_after="value" { str = MODULEEXPR .. "_after%s*=%s*$VALUE", process = function(k, v) setKey(k, "after", v) end, }, -- module_error="value" { str = MODULEEXPR .. "_error%s*=%s*$VALUE", process = function(k, v) setKey(k, "error", v) end, }, -- exec="command" { str = "exec%s*=%s*" .. QVALEXPR, process = function(k, _) if cli_execute_unparsed(k) ~= 0 then print(MSG_FAILEXEC:format(k)) end end, groups = 1, }, -- env_var="value" { str = "([%w%p]+)%s*=%s*$VALUE", process = function(k, v) if setEnv(k, processEnvVar(v)) ~= 0 then print(MSG_FAILSETENV:format(k, v)) end end, }, -- env_var=num { str = "([%w%p]+)%s*=%s*(-?%d+)", process = function(k, v) if setEnv(k, processEnvVar(v)) ~= 0 then print(MSG_FAILSETENV:format(k, tostring(v))) end end, }, } local function isValidComment(line) if line ~= nil then local s = line:match("^%s*#.*") if s == nil then s = line:match("^%s*$") end if s == nil then return false end end return true end local function getBlacklist() local blacklist = {} local blacklist_str = loader.getenv('module_blacklist') if blacklist_str == nil then return blacklist end for mod in blacklist_str:gmatch("[;, ]?([%w-_]+)[;, ]?") do blacklist[mod] = true end return blacklist end local function loadModule(mod, silent) local status = true local blacklist = getBlacklist() local pstatus for k, v in pairs(mod) do if v.load ~= nil and v.load:lower() == "yes" then local module_name = v.name or k if not v.force and blacklist[module_name] ~= nil then if not silent then print(MSG_MODBLACKLIST:format(module_name)) end goto continue end if not silent then loader.printc(module_name .. "...") end local str = "load " if v.type ~= nil then str = str .. "-t " .. v.type .. " " end str = str .. module_name if v.flags ~= nil then str = str .. " " .. v.flags end if v.before ~= nil then pstatus = cli_execute_unparsed(v.before) == 0 if not pstatus and not silent then print(MSG_FAILEXBEF:format(v.before, k)) end status = status and pstatus end if cli_execute_unparsed(str) ~= 0 then -- XXX Temporary shim: don't break the boot if -- loader hadn't been recompiled with this -- function exposed. if loader.command_error then print(loader.command_error()) end if not silent then print("failed!") end if v.error ~= nil then cli_execute_unparsed(v.error) end status = false elseif v.after ~= nil then pstatus = cli_execute_unparsed(v.after) == 0 if not pstatus and not silent then print(MSG_FAILEXAF:format(v.after, k)) end if not silent then print("ok") end status = status and pstatus end end ::continue:: end return status end local function readFile(name, silent) local f = io.open(name) if f == nil then if not silent then print(MSG_FAILOPENCFG:format(name)) end return nil end local text, _ = io.read(f) -- We might have read in the whole file, this won't be needed any more. io.close(f) if text == nil and not silent then print(MSG_FAILREADCFG:format(name)) end return text end local function checkNextboot() local nextboot_file = loader.getenv("nextboot_conf") if nextboot_file == nil then return end local text = readFile(nextboot_file, true) if text == nil then return end if text:match("^nextboot_enable=\"NO\"") ~= nil then -- We're done; nextboot is not enabled return end if not config.parse(text) then print(MSG_FAILPARSECFG:format(nextboot_file)) end -- Attempt to rewrite the first line and only the first line of the -- nextboot_file. We overwrite it with nextboot_enable="NO", then -- check for that on load. -- It's worth noting that this won't work on every filesystem, so we -- won't do anything notable if we have any errors in this process. local nfile = io.open(nextboot_file, 'w') if nfile ~= nil then -- We need the trailing space here to account for the extra -- character taken up by the string nextboot_enable="YES" -- Or new end quotation mark lands on the S, and we want to -- rewrite the entirety of the first line. io.write(nfile, "nextboot_enable=\"NO\" ") io.close(nfile) end end -- Module exports config.verbose = false -- The first item in every carousel is always the default item. function config.getCarouselIndex(id) return carousel_choices[id] or 1 end function config.setCarouselIndex(id, idx) carousel_choices[id] = idx end -- Returns true if we processed the file successfully, false if we did not. -- If 'silent' is true, being unable to read the file is not considered a -- failure. function config.processFile(name, silent) if silent == nil then silent = false end local text = readFile(name, silent) if text == nil then return silent end return config.parse(text) end -- silent runs will not return false if we fail to open the file function config.parse(text) local n = 1 local status = true for line in text:gmatch("([^\n]+)") do if line:match("^%s*$") == nil then for _, val in ipairs(pattern_table) do local pattern = '^%s*' .. val.str .. '%s*(.*)'; local cgroups = val.groups or 2 local k, v, c = checkPattern(line, pattern) if k ~= nil then -- Offset by one, drats if cgroups == 1 then c = v v = nil end if isValidComment(c) then val.process(k, v) goto nextline end break end end print(MSG_MALFORMED:format(n, line)) status = false end ::nextline:: n = n + 1 end return status end function config.readConf(file, loaded_files) if loaded_files == nil then loaded_files = {} end if loaded_files[file] ~= nil then return end + -- We'll process loader_conf_dirs at the top-level readConf + local load_conf_dirs = next(loaded_files) == nil print("Loading " .. file) -- The final value of loader_conf_files is not important, so just -- clobber it here. We'll later check if it's no longer nil and process -- the new value for files to read. setEnv("loader_conf_files", nil) -- These may or may not exist, and that's ok. Do a -- silent parse so that we complain on parse errors but -- not for them simply not existing. if not config.processFile(file, true) then print(MSG_FAILPARSECFG:format(file)) end loaded_files[file] = true -- Going to process "loader_conf_files" extra-files local loader_conf_files = getEnv("loader_conf_files") if loader_conf_files ~= nil then for name in loader_conf_files:gmatch("[%w%p]+") do config.readConf(name, loaded_files) end end + + if load_conf_dirs then + local loader_conf_dirs = getEnv("loader_conf_dirs") + if loader_conf_dirs ~= nil then + for name in loader_conf_dirs:gmatch("[%w%p]+") do + if lfs.attributes(name, "mode") ~= "directory" then + print(MSG_FAILDIR:format(name)) + goto nextdir + end + for cfile in lfs.dir(name) do + if cfile:match(".conf$") then + local fpath = name .. "/" .. cfile + if lfs.attributes(fpath, "mode") == "file" then + config.readConf(fpath, loaded_files) + end + end + end + ::nextdir:: + end + end + end end -- other_kernel is optionally the name of a kernel to load, if not the default -- or autoloaded default from the module_path function config.loadKernel(other_kernel) local flags = loader.getenv("kernel_options") or "" local kernel = other_kernel or loader.getenv("kernel") local function tryLoad(names) for name in names:gmatch("([^;]+)%s*;?") do local r = loader.perform("load " .. name .. " " .. flags) if r == 0 then return name end end return nil end local function getModulePath() local module_path = loader.getenv("module_path") local kernel_path = loader.getenv("kernel_path") if kernel_path == nil then return module_path end -- Strip the loaded kernel path from module_path. This currently assumes -- that the kernel path will be prepended to the module_path when it's -- found. kernel_path = escapeName(kernel_path .. ';') return module_path:gsub(kernel_path, '') end local function loadBootfile() local bootfile = loader.getenv("bootfile") -- append default kernel name if bootfile == nil then bootfile = "kernel" else bootfile = bootfile .. ";kernel" end return tryLoad(bootfile) end -- kernel not set, try load from default module_path if kernel == nil then local res = loadBootfile() if res ~= nil then -- Default kernel is loaded config.kernel_loaded = nil return true else print(MSG_DEFAULTKERNFAIL) return false end else -- Use our cached module_path, so we don't end up with multiple -- automatically added kernel paths to our final module_path local module_path = getModulePath() local res if other_kernel ~= nil then kernel = other_kernel end -- first try load kernel with module_path = /boot/${kernel} -- then try load with module_path=${kernel} local paths = {"/boot/" .. kernel, kernel} for _, v in pairs(paths) do loader.setenv("module_path", v) res = loadBootfile() -- succeeded, add path to module_path if res ~= nil then config.kernel_loaded = kernel if module_path ~= nil then loader.setenv("module_path", v .. ";" .. module_path) loader.setenv("kernel_path", v) end return true end end -- failed to load with ${kernel} as a directory -- try as a file res = tryLoad(kernel) if res ~= nil then config.kernel_loaded = kernel return true else print(MSG_KERNFAIL:format(kernel)) return false end end end function config.selectKernel(kernel) config.kernel_selected = kernel end function config.load(file, reloading) if not file then file = "/boot/defaults/loader.conf" end config.readConf(file) checkNextboot() local verbose = loader.getenv("verbose_loading") or "no" config.verbose = verbose:lower() == "yes" if not reloading then hook.runAll("config.loaded") end end -- Reload configuration function config.reload(file) modules = {} restoreEnv() config.load(file, true) hook.runAll("config.reloaded") end function config.loadelf() local xen_kernel = loader.getenv('xen_kernel') local kernel = config.kernel_selected or config.kernel_loaded local status if xen_kernel ~= nil then print(MSG_XENKERNLOADING) if cli_execute_unparsed('load ' .. xen_kernel) ~= 0 then print(MSG_XENKERNFAIL:format(xen_kernel)) return false end end print(MSG_KERNLOADING) if not config.loadKernel(kernel) then return false end hook.runAll("kernel.loaded") print(MSG_MODLOADING) status = loadModule(modules, not config.verbose) hook.runAll("modules.loaded") return status end function config.enableModule(modname) if modules[modname] == nil then modules[modname] = {} elseif modules[modname].load == "YES" then modules[modname].force = true return true end modules[modname].load = "YES" modules[modname].force = true return true end function config.disableModule(modname) if modules[modname] == nil then return false elseif modules[modname].load ~= "YES" then return true end modules[modname].load = "NO" modules[modname].force = nil return true end function config.isModuleEnabled(modname) local mod = modules[modname] if not mod or mod.load ~= "YES" then return false end if mod.force then return true end local blacklist = getBlacklist() return not blacklist[modname] end function config.getModuleInfo() return { modules = modules, blacklist = getBlacklist() } end hook.registerType("config.loaded") hook.registerType("config.reloaded") hook.registerType("kernel.loaded") hook.registerType("modules.loaded") return config