diff --git a/usr.sbin/jail/jail.8 b/usr.sbin/jail/jail.8 index e49c3fe95e7f..d58192623952 100644 --- a/usr.sbin/jail/jail.8 +++ b/usr.sbin/jail/jail.8 @@ -1,1500 +1,1503 @@ .\" Copyright (c) 2000, 2003 Robert N. M. Watson .\" Copyright (c) 2008-2012 James Gritton .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd January 17, 2024 +.Dd March 16, 2024 .Dt JAIL 8 .Os .Sh NAME .Nm jail .Nd "manage system jails" .Sh SYNOPSIS .Ss From Configuration File .Nm .Op Fl cm -.Op Fl dqv +.Op Fl Cdqv .Op Fl f Ar conf_file .Op Fl p Ar limit .Op Ar jail .Nm .Op Fl r -.Op Fl qv +.Op Fl Cqv .Op Fl f Ar conf_file .Op Fl p Ar limit .Op Cm * | Ar jail ... .Ss Without Configuration File .Nm .Op Fl cm .Op Fl dhilqv .Op Fl J Ar jid_file .Op Fl u Ar username .Op Fl U Ar username .Ar param Ns = Ns Ar value ... .Op Cm command Ns = Ns Ar command ... .Nm .Op Fl rR .Op Fl qv .Op Cm * | Ar jail ... .Ss Show Parameters .Nm .Op Fl f Ar conf_file .Fl e .Ar separator .Ss Backward Compatibility .Nm .Op Fl dhilqv .Op Fl J Ar jid_file .Op Fl u Ar username .Op Fl U Ar username .Op Fl n Ar jailname .Op Fl s Ar securelevel .Ar path hostname ip Ns Op Cm \&, Ns Ar ... .Ar command ... .Sh DESCRIPTION The .Nm utility creates new jails, or modifies or removes existing jails. It can also print a list of configured jails and their parameters. A jail .Pq or Dq prison is specified via parameters on the command line, or in the .Xr jail.conf 5 file. .Pp At least one of the options .Fl c , .Fl e , .Fl m or .Fl r must be specified. These options are used alone or in combination to describe the operation to perform: .Bl -tag -width indent .It Fl c Create a new jail. The jail .Va jid and .Va name parameters (if specified on the command line) must not refer to an existing jail. .It Fl e Ar separator Exhibit a list of all configured non-wildcard jails and their parameters. No jail creation, modification or removal performed if this option is used. The .Ar separator string is used to separate parameters. Use .Xr jls 8 utility to list running jails. .It Fl m Modify an existing jail. One of the .Va jid or .Va name parameters must exist and refer to an existing jail. Some parameters may not be changed on a running jail. .It Fl r Remove the .Ar jail specified by jid or name. All jailed processes are killed, and all jails that are children of this jail are also removed. .It Fl rc Restart an existing jail. The jail is first removed and then re-created, as if .Dq Nm Fl r and .Dq Nm Fl c were run in succession. .It Fl cm Create a jail if it does not exist, or modify the jail if it does exist. .It Fl mr Modify an existing jail. The jail may be restarted if necessary to modify parameters than could not otherwise be changed. .It Fl cmr Create a jail if it doesn't exist, or modify (and possibly restart) the jail if it does exist. .El .Pp Other available options are: .Bl -tag -width indent +.It Fl C +Clean up after an already-removed jail, running commands and operations +that are typically run following jail removal. .It Fl f Ar conf_file Use configuration file .Ar conf_file instead of the default .Pa /etc/jail.conf . .It Fl h Resolve the .Va host.hostname parameter (or .Va hostname ) and add all IP addresses returned by the resolver to the list of addresses for this jail. This is equivalent to the .Va ip_hostname parameter. .It Fl i Output (only) the jail identifier of the newly created jail(s). This implies the .Fl q option. .It Fl J Ar jid_file Write a .Ar jid_file file, containing the parameters used to start the jail. .It Fl l Run commands in a clean environment. This is deprecated and is equivalent to the exec.clean parameter. .It Fl n Ar jailname Set the jail's name. This is deprecated and is equivalent to the .Va name parameter. .It Fl p Ar limit Limit the number of commands from .Va exec.* that can run simultaneously. .It Fl q Suppress the message printed whenever a jail is created, modified or removed. Only error messages will be printed. .It Fl R A variation of the .Fl r option that removes an existing jail without using the configuration file. No removal-related parameters for this jail will be used \(em the jail will simply be removed. .It Fl s Ar securelevel Set the .Va kern.securelevel MIB entry to the specified value inside the newly created jail. This is deprecated and is equivalent to the .Va securelevel parameter. .It Fl u Ar username The user name from host environment as whom jailed commands should run. This is deprecated and is equivalent to the .Va exec.jail_user and .Va exec.system_jail_user parameters. .It Fl U Ar username The user name from the jailed environment as whom jailed commands should run. This is deprecated and is equivalent to the .Va exec.jail_user parameter. .It Fl v Print a message on every operation, such as running commands and mounting filesystems. .It Fl d This is deprecated and is equivalent to the .Va allow.dying parameter, which is also deprecated. It used to allow making changes to a .Va dying jail. Now such jails are always replaced when a new jail is created with the same .Va jid or .Va name . .El .Pp If no arguments are given after the options, the operation (except remove) will be performed on all jails specified in the .Xr jail.conf 5 file. A single argument of a jail name will operate only on the specified jail. The .Fl r and .Fl R options can also remove running jails that aren't in the .Xr jail.conf 5 file, specified by name or jid. .Pp An argument of .Dq * is a wildcard that will operate on all jails, regardless of whether they appear in .Xr jail.conf 5 ; this is the surest way for .Fl r to remove all jails. If hierarchical jails exist, a partial-matching wildcard definition may be specified. For example, an argument of .Dq foo.* would apply to jails with names like .Dq foo.bar and .Dq foo.bar.baz . .Pp A jail may also be specified via parameters directly on the command line in .Dq name=value form, ignoring the contents of .Xr jail.conf 5 . For backward compatibility, the command line may also have four fixed parameters, without names: .Ar path , .Ar hostname , .Ar ip , and .Ar command . .Ss Jail Parameters Parameters in the .Xr jail.conf 5 file, or on the command line, are generally of the form .Dq name=value . Some parameters are boolean, and do not have a value but are set by the name alone with or without a .Dq no prefix, e.g. .Va persist or .Va nopersist . They can also be given the values .Dq true and .Dq false . Other parameters may have more than one value, specified as a comma-separated list or with .Dq += in the configuration file (see .Xr jail.conf 5 for details). .Pp The .Nm utility recognizes two classes of parameters. There are the true jail parameters that are passed to the kernel when the jail is created, which can be seen with .Xr jls 8 , and can (usually) be changed with .Dq Nm Fl m . Then there are pseudo-parameters that are only used by .Nm itself. .Pp Jails have a set of core parameters, and kernel modules can add their own jail parameters. The current set of available parameters can be retrieved via .Dq Nm sysctl Fl d Va security.jail.param . Any parameters not set will be given default values, often based on the current environment. The core parameters are: .Bl -tag -width indent .It Va jid The jail identifier. This will be assigned automatically to a new jail (or can be explicitly set), and can be used to identify the jail for later modification, or for such commands as .Xr jls 8 or .Xr jexec 8 . .It Va name The jail name. This is an arbitrary string that identifies a jail (except it may not contain a .Sq \&. ) . Like the .Va jid , it can be passed to later .Nm commands, or to .Xr jls 8 or .Xr jexec 8 . If no .Va name is supplied, a default is assumed that is the same as the .Va jid . The .Va name parameter is implied by the .Xr jail.conf 5 file format, and need not be explicitly set when using the configuration file. .It Va path The directory which is to be the root of the jail. Any commands run inside the jail, either by .Nm or from .Xr jexec 8 , are run from this directory. .It Va ip4.addr A list of IPv4 addresses assigned to the jail. If this is set, the jail is restricted to using only these addresses. Any attempts to use other addresses fail, and attempts to use wildcard addresses silently use the jailed address instead. For IPv4 the first address given will be used as the source address when source address selection on unbound sockets cannot find a better match. It is only possible to start multiple jails with the same IP address if none of the jails has more than this single overlapping IP address assigned to itself. .It Va ip4.saddrsel A boolean option to change the formerly mentioned behaviour and disable IPv4 source address selection for the jail in favour of the primary IPv4 address of the jail. Source address selection is enabled by default for all jails and the .Va ip4.nosaddrsel setting of a parent jail is not inherited for any child jails. .It Va ip4 Control the availability of IPv4 addresses. Possible values are .Dq inherit to allow unrestricted access to all system addresses, .Dq new to restrict addresses via .Va ip4.addr , and .Dq disable to stop the jail from using IPv4 entirely. Setting the .Va ip4.addr parameter implies a value of .Dq new . .It Va ip6.addr , Va ip6.saddrsel , Va ip6 A set of IPv6 options for the jail, the counterparts to .Va ip4.addr , .Va ip4.saddrsel and .Va ip4 above. .It Va vnet Create the jail with its own virtual network stack, with its own network interfaces, addresses, routing table, etc. The kernel must have been compiled with the .Sy VIMAGE option for this to be available. Possible values are .Dq inherit to use the system network stack, possibly with restricted IP addresses, and .Dq new to create a new network stack. .It Va host.hostname The hostname of the jail. Other similar parameters are .Va host.domainname , .Va host.hostuuid and .Va host.hostid . .It Va host Set the origin of hostname and related information. Possible values are .Dq inherit to use the system information and .Dq new for the jail to use the information from the above fields. Setting any of the above fields implies a value of .Dq new . .It Va securelevel The value of the jail's .Va kern.securelevel sysctl. A jail never has a lower securelevel than its parent system, but by setting this parameter it may have a higher one. If the system securelevel is changed, any jail securelevels will be at least as secure. .It Va devfs_ruleset The number of the devfs ruleset that is enforced for mounting devfs in this jail. A value of zero (default) means no ruleset is enforced. Descendant jails inherit the parent jail's devfs ruleset enforcement. Mounting devfs inside a jail is possible only if the .Va allow.mount and .Va allow.mount.devfs permissions are effective and .Va enforce_statfs is set to a value lower than 2. Devfs rules and rulesets cannot be viewed or modified from inside a jail. .Pp NOTE: It is important that only appropriate device nodes in devfs be exposed to a jail; access to disk devices in the jail may permit processes in the jail to bypass the jail sandboxing by modifying files outside of the jail. See .Xr devfs 8 for information on how to use devfs rules to limit access to entries in the per-jail devfs. A simple devfs ruleset for jails is available as ruleset #4 in .Pa /etc/defaults/devfs.rules . .It Va children.max The number of child jails allowed to be created by this jail (or by other jails under this jail). This limit is zero by default, indicating the jail is not allowed to create child jails. See the .Sx "Hierarchical Jails" section for more information. .It Va children.cur The number of descendants of this jail, including its own child jails and any jails created under them. .It Va enforce_statfs This determines what information processes in a jail are able to get about mount points. It affects the behaviour of the following syscalls: .Xr statfs 2 , .Xr fstatfs 2 , .Xr getfsstat 2 , and .Xr fhstatfs 2 (as well as similar compatibility syscalls). When set to 0, all mount points are available without any restrictions. When set to 1, only mount points below the jail's chroot directory are visible. In addition to that, the path to the jail's chroot directory is removed from the front of their pathnames. When set to 2 (default), above syscalls can operate only on a mount-point where the jail's chroot directory is located. .It Va persist Setting this boolean parameter allows a jail to exist without any processes. Normally, a command is run as part of jail creation, and then the jail is destroyed as its last process exits. A new jail must have either the .Va persist parameter or .Va exec.start or .Va command pseudo-parameter set. .It Va cpuset.id The ID of the cpuset associated with this jail (read-only). .It Va dying This is true if the jail is in the process of shutting down (read-only). .It Va parent The .Va jid of the parent of this jail, or zero if this is a top-level jail (read-only). .It Va osrelease The string for the jail's .Va kern.osrelease sysctl and uname -r. .It Va osreldate The number for the jail's .Va kern.osreldate and uname -K. .It Va allow.* Some restrictions of the jail environment may be set on a per-jail basis. With the exception of .Va allow.set_hostname and .Va allow.reserved_ports , these boolean parameters are off by default. .Bl -tag -width indent .It Va allow.set_hostname The jail's hostname may be changed via .Xr hostname 1 or .Xr sethostname 3 . .It Va allow.sysvipc A process within the jail has access to System V IPC primitives. This is deprecated in favor of the per-module parameters (see below). When this parameter is set, it is equivalent to setting .Va sysvmsg , .Va sysvsem , and .Va sysvshm all to .Dq inherit . .It Va allow.raw_sockets The jail root is allowed to create raw sockets. Setting this parameter allows utilities like .Xr ping 8 and .Xr traceroute 8 to operate inside the jail. If this is set, the source IP addresses are enforced to comply with the IP address bound to the jail, regardless of whether or not the .Dv IP_HDRINCL flag has been set on the socket. Since raw sockets can be used to configure and interact with various network subsystems, extra caution should be used where privileged access to jails is given out to untrusted parties. .It Va allow.chflags Normally, privileged users inside a jail are treated as unprivileged by .Xr chflags 2 . When this parameter is set, such users are treated as privileged, and may manipulate system file flags subject to the usual constraints on .Va kern.securelevel . .It Va allow.mount privileged users inside the jail will be able to mount and unmount file system types marked as jail-friendly. The .Xr lsvfs 1 command can be used to find file system types available for mount from within a jail. This permission is effective only if .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.devfs privileged users inside the jail will be able to mount and unmount the devfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. The devfs ruleset should be restricted from the default by using the .Va devfs_ruleset option. .It Va allow.quotas The jail root may administer quotas on the jail's filesystem(s). This includes filesystems that the jail may share with other jails or with non-jailed parts of the system. .It Va allow.read_msgbuf Jailed users may read the kernel message buffer. If the .Va security.bsd.unprivileged_read_msgbuf MIB entry is zero, this will be restricted to the root user. .It Va allow.socket_af Sockets within a jail are normally restricted to IPv4, IPv6, local (UNIX), and route. This allows access to other protocol stacks that have not had jail functionality added to them. .It Va allow.mlock Locking or unlocking physical pages in memory are normally not available within a jail. When this parameter is set, users may .Xr mlock 2 or .Xr munlock 2 memory subject to .Va security.bsd.unprivileged_mlock and resource limits. .It Va allow.nfsd The .Xr mountd 8 , .Xr nfsd 8 , .Xr nfsuserd 8 , .Xr gssd 8 and .Xr rpc.tlsservd 8 daemons are permitted to run inside a properly configured vnet-enabled jail. The jail's root must be a file system mount point and .Va enforce_statfs must not be set to 0, so that .Xr mountd 8 can export file systems visible within the jail. .Va enforce_statfs must be set to 1 if file systems mounted under the jail's file system need to be exported by .Xr mount 8 . For exporting only the jail's file system, a setting of 2 is sufficient. If the kernel configuration does not include the .Sy NFSD option, .Pa nfsd.ko must be loaded outside of the jails. This is normally done by adding .Dq nfsd to .Va kld_list in the .Xr rc.conf 5 file outside of the jails. Similarily, if the .Xr gssd 8 is to be run in a jail, either the kernel .Sy KGSSAPI option needs to be specified or .Dq kgssapi and .Dq kgssapi_krb5 need to be in .Va kld_list in the .Xr rc.conf 5 file outside of the jails. .It Va allow.reserved_ports The jail root may bind to ports lower than 1024. .It Va allow.unprivileged_proc_debug Unprivileged processes in the jail may use debugging facilities. .It Va allow.suser The value of the jail's .Va security.bsd.suser_enabled sysctl. The super-user will be disabled automatically if its parent system has it disabled. The super-user is enabled by default. .It Va allow.extattr Allow privileged process in the jail to manipulate filesystem extended attributes in the system namespace. .El .El .Pp Kernel modules may add their own parameters, which only exist when the module is loaded. These are typically headed under a parameter named after the module, with values of .Dq inherit to give the jail full use of the module, .Dq new to encapsulate the jail in some module-specific way, and .Dq disable to make the module unavailable to the jail. There also may be other parameters to define jail behavior within the module. Module-specific parameters include: .Bl -tag -width indent .It Va allow.mount.fdescfs privileged users inside the jail will be able to mount and unmount the fdescfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.fusefs privileged users inside the jail will be able to mount and unmount fuse-based file systems. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.nullfs privileged users inside the jail will be able to mount and unmount the nullfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.procfs privileged users inside the jail will be able to mount and unmount the procfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.linprocfs privileged users inside the jail will be able to mount and unmount the linprocfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.linsysfs privileged users inside the jail will be able to mount and unmount the linsysfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.tmpfs privileged users inside the jail will be able to mount and unmount the tmpfs file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. .It Va allow.mount.zfs privileged users inside the jail will be able to mount and unmount the ZFS file system. This permission is effective only together with .Va allow.mount and only when .Va enforce_statfs is set to a value lower than 2. See .Xr zfs 8 for information on how to configure the ZFS filesystem to operate from within a jail. .It Va allow.vmm The jail may access .Xr vmm 4 . This flag is only available when the .Xr vmm 4 kernel module is loaded. .It Va linux Determine how a jail's Linux emulation environment appears. A value of .Dq inherit will keep the same environment, and .Dq new will give the jail its own environment (still originally inherited when the jail is created). .It Va linux.osname , linux.osrelease , linux.oss_version The Linux OS name, OS release, and OSS version associated with this jail. .It Va sysvmsg Allow access to SYSV IPC message primitives. If set to .Dq inherit , all IPC objects on the system are visible to this jail, whether they were created by the jail itself, the base system, or other jails. If set to .Dq new , the jail will have its own key namespace, and can only see the objects that it has created; the system (or parent jail) has access to the jail's objects, but not to its keys. If set to .Dq disable , the jail cannot perform any sysvmsg-related system calls. .It Va sysvsem, sysvshm Allow access to SYSV IPC semaphore and shared memory primitives, in the same manner as .Va sysvmsg . .El .Pp There are pseudo-parameters that are not passed to the kernel, but are used by .Nm to set up the jail environment, often by running specified commands when jails are created or removed. The .Va exec.* command parameters are .Xr sh 1 command lines that are run in either the system or jail environment. They may be given multiple values, which would run the specified commands in sequence. All commands must succeed (return a zero exit status), or the jail will not be created or removed, as appropriate. .Pp The pseudo-parameters are: .Bl -tag -width indent .It Va exec.prepare Command(s) to run in the system environment to prepare a jail for creation. These commands are executed before assigning IP addresses and mounting filesystems, so they may be used to create a new jail filesystem if it does not already exist. .It Va exec.prestart Command(s) to run in the system environment before a jail is created. .It Va exec.created Command(s) to run in the system environment right after a jail has been created, but before commands (or services) get executed in the jail. .It Va exec.start Command(s) to run in the jail environment when a jail is created. A typical command to run is .Dq sh /etc/rc . .It Va command A synonym for .Va exec.start for use when specifying a jail directly on the command line. Unlike other parameters whose value is a single string, .Va command uses the remainder of the .Nm command line as its own arguments. .It Va exec.poststart Command(s) to run in the system environment after a jail is created, and after any .Va exec.start commands have completed. .It Va exec.prestop Command(s) to run in the system environment before a jail is removed. .It Va exec.stop Command(s) to run in the jail environment before a jail is removed, and after any .Va exec.prestop commands have completed. A typical command to run is .Dq sh /etc/rc.shutdown jail . .It Va exec.poststop Command(s) to run in the system environment after a jail is removed. .It Va exec.release Command(s) to run in the system environment after all other actions are done. These commands are executed after unmounting filesystems and removing IP addresses, so they may be used to remove a jail filesystem if it is no longer needed. .It Va exec.clean Run commands in a clean environment. The environment is discarded except for .Ev HOME , SHELL , TERM and .Ev USER . .Ev HOME and .Ev SHELL are set to the target login's default values. .Ev USER is set to the target login. .Ev TERM is imported from the current environment. The environment variables from the login class capability database for the target login are also set. .It Va exec.jail_user The user to run commands as, when running in the jail environment. The default is to run the commands as the current user. .It Va exec.system_jail_user This boolean option looks for the .Va exec.jail_user in the system .Xr passwd 5 file, instead of in the jail's file. .It Va exec.system_user The user to run commands as, when running in the system environment. The default is to run the commands as the current user. .It Va exec.timeout The maximum amount of time to wait for a command to complete, in seconds. If a command is still running after this timeout has passed, the jail will not be created or removed, as appropriate. .It Va exec.consolelog A file to direct command output (stdout and stderr) to. .It Va exec.fib The FIB (routing table) to set when running commands inside the jail. .It Va stop.timeout The maximum amount of time to wait for a jail's processes to exit after sending them a .Dv SIGTERM signal (which happens after the .Va exec.stop commands have completed). After this many seconds have passed, the jail will be removed, which will kill any remaining processes. If this is set to zero, no .Dv SIGTERM is sent and the jail is immediately removed. The default is 10 seconds. .It Va interface A network interface to add the jail's IP addresses .Va ( ip4.addr and .Va ip6.addr ) to. An alias for each address will be added to the interface before the jail is created, and will be removed from the interface after the jail is removed. .It Va ip4.addr In addition to the IP addresses that are passed to the kernel, an interface, netmask and additional parameters (as supported by .Xr ifconfig 8 Ns ) may also be specified, in the form .Dq Ar interface Ns | Ns Ar ip-address Ns / Ns Ar netmask param ... . If an interface is given before the IP address, an alias for the address will be added to that interface, as it is with the .Va interface parameter. If a netmask in either dotted-quad or CIDR form is given after an IP address, it will be used when adding the IP alias. If additional parameters are specified then they will also be used when adding the IP alias. .It Va ip6.addr In addition to the IP addresses that are passed to the kernel, an interface, prefix and additional parameters (as supported by .Xr ifconfig 8 Ns ) may also be specified, in the form .Dq Ar interface Ns | Ns Ar ip-address Ns / Ns Ar prefix param ... . .It Va vnet.interface A network interface to give to a vnet-enabled jail after is it created. The interface will automatically be released when the jail is removed. .It Va zfs.dataset A list of ZFS datasets to be attached to the jail. This requires .Va allow.mount.zfs to be set. See .Xr zfs-jail 8 for information on how to configure a ZFS dataset to be operated from within a jail. .It Va ip_hostname Resolve the .Va host.hostname parameter and add all IP addresses returned by the resolver to the list of addresses .Po Va ip4.addr or .Va ip6.addr Pc for this jail. This may affect default address selection for outgoing IPv4 connections from jails. The address first returned by the resolver for each address family will be used as the primary address. .It Va mount A filesystem to mount before creating the jail (and to unmount after removing it), given as a single .Xr fstab 5 line. .It Va mount.fstab An .Xr fstab 5 format file containing filesystems to mount before creating a jail. .It Va mount.devfs Mount a .Xr devfs 5 filesystem on the chrooted .Pa /dev directory, and apply the ruleset in the .Va devfs_ruleset parameter (or a default of ruleset 4: devfsrules_jail) to restrict the devices visible inside the jail. .It Va mount.fdescfs Mount a .Xr fdescfs 5 filesystem on the chrooted .Pa /dev/fd directory. .It Va mount.procfs Mount a .Xr procfs 5 filesystem on the chrooted .Pa /proc directory. .It Va allow.dying This is deprecated and has no effect. It used to allow making changes to a .Va dying jail. Now such jails are always replaced when a new jail is created with the same .Va jid or .Va name . .It Va depend Specify a jail (or jails) that this jail depends on. When this jail is to be created, any jail(s) it depends on must already exist. If not, they will be created automatically, up to the completion of the last .Va exec.poststart command, before any action will taken to create this jail. When jails are removed the opposite is true: this jail will be removed, up to the last .Va exec.poststop command, before any jail(s) it depends on are stopped. .El .Sh EXAMPLES Jails are typically set up using one of two philosophies: either to constrain a specific application (possibly running with privilege), or to create a .Dq "virtual system image" running a variety of daemons and services. In both cases, a fairly complete file system install of .Fx is required, so as to provide the necessary command line tools, daemons, libraries, application configuration files, etc. However, for a virtual server configuration, a fair amount of additional work is required so as to replace the .Dq boot process. This manual page documents the configuration steps necessary to support either of these steps, although the configuration steps may need to be refined based on local requirements. .Ss "Setting up a Jail Directory Tree" To set up a jail directory tree containing an entire .Fx distribution, the following .Xr sh 1 command script can be used: .Bd -literal -offset indent D=/here/is/the/jail cd /usr/src mkdir -p $D make world DESTDIR=$D make distribution DESTDIR=$D .Ed .Pp In many cases this example would put far more in the jail than needed. In the other extreme case a jail might contain only one file: the executable to be run in the jail. .Pp We recommend experimentation, and caution that it is a lot easier to start with a .Dq fat jail and remove things until it stops working, than it is to start with a .Dq thin jail and add things until it works. .Ss "Setting Up a Jail" Do what was described in .Sx "Setting Up a Jail Directory Tree" to build the jail directory tree. For the sake of this example, we will assume you built it in .Pa /data/jail/testjail , for a jail named .Dq testjail . Substitute below as needed with your own directory, IP address, and hostname. .Ss "Setting up the Host Environment" First, set up the real system's environment to be .Dq jail-friendly . For consistency, we will refer to the parent box as the .Dq "host environment" , and to the jailed virtual machine as the .Dq "jail environment" . Since jails are implemented using IP aliases, one of the first things to do is to disable IP services on the host system that listen on all local IP addresses for a service. If a network service is present in the host environment that binds all available IP addresses rather than specific IP addresses, it may service requests sent to jail IP addresses if the jail did not bind the port. This means changing .Xr inetd 8 to only listen on the appropriate IP address, and so forth. Add the following to .Pa /etc/rc.conf in the host environment: .Bd -literal -offset indent sendmail_enable="NO" inetd_flags="-wW -a 192.0.2.23" rpcbind_enable="NO" .Ed .Pp .Li 192.0.2.23 is the native IP address for the host system, in this example. Daemons that run out of .Xr inetd 8 can be easily configured to use only the specified host IP address. Other daemons will need to be manually configured \(em for some this is possible through .Xr rc.conf 5 flags entries; for others it is necessary to modify per-application configuration files, or to recompile the application. The following frequently deployed services must have their individual configuration files modified to limit the application to listening to a specific IP address: .Pp To configure .Xr sshd 8 , it is necessary to modify .Pa /etc/ssh/sshd_config . .Pp To configure .Xr sendmail 8 , it is necessary to modify .Pa /etc/mail/sendmail.cf . .Pp In addition, a number of services must be recompiled in order to run them in the host environment. This includes most applications providing services using .Xr rpc 3 , such as .Xr rpcbind 8 , .Xr nfsd 8 , and .Xr mountd 8 . In general, applications for which it is not possible to specify which IP address to bind should not be run in the host environment unless they should also service requests sent to jail IP addresses. Attempting to serve NFS from the host environment may also cause confusion, and cannot be easily reconfigured to use only specific IPs, as some NFS services are hosted directly from the kernel. Any third-party network software running in the host environment should also be checked and configured so that it does not bind all IP addresses, which would result in those services also appearing to be offered by the jail environments. .Pp Once these daemons have been disabled or fixed in the host environment, it is best to reboot so that all daemons are in a known state, to reduce the potential for confusion later (such as finding that when you send mail to a jail, and its sendmail is down, the mail is delivered to the host, etc.). .Ss "Configuring the Jail" Start any jail for the first time without configuring the network interface so that you can clean it up a little and set up accounts. As with any machine (virtual or not), you will need to set a root password, time zone, etc. Some of these steps apply only if you intend to run a full virtual server inside the jail; others apply both for constraining a particular application or for running a virtual server. .Pp Start a shell in the jail: .Bd -literal -offset indent jail -c path=/data/jail/testjail mount.devfs \\ host.hostname=testhostname ip4.addr=192.0.2.100 \\ command=/bin/sh .Ed .Pp Assuming no errors, you will end up with a shell prompt within the jail. You can now run .Xr bsdconfig 8 and do the post-install configuration to set various configuration options, or perform these actions manually by editing .Pa /etc/rc.conf , etc. .Pp .Bl -bullet -offset indent -compact .It Configure .Pa /etc/resolv.conf so that name resolution within the jail will work correctly. .It Run .Xr newaliases 1 to quell .Xr sendmail 8 warnings. .It Set a root password, probably different from the real host system. .It Set the timezone. .It Add accounts for users in the jail environment. .It Install any packages the environment requires. .El .Pp You may also want to perform any package-specific configuration (web servers, SSH servers, etc), patch up .Pa /etc/syslog.conf so it logs as you would like, etc. If you are not using a virtual server, you may wish to modify .Xr syslogd 8 in the host environment to listen on the syslog socket in the jail environment; in this example, the syslog socket would be stored in .Pa /data/jail/testjail/var/run/log . .Pp Exit from the shell, and the jail will be shut down. .Ss "Starting the Jail" You are now ready to restart the jail and bring up the environment with all of its daemons and other programs. Create an entry for the jail in .Pa /etc/jail.conf : .Bd -literal -offset indent testjail { path = /tmp/jail/testjail; mount.devfs; host.hostname = testhostname; ip4.addr = 192.0.2.100; interface = em0; exec.start = "/bin/sh /etc/rc"; exec.stop = "/bin/sh /etc/rc.shutdown jail"; } .Ed .Pp To start a virtual server environment, .Pa /etc/rc is run to launch various daemons and services, and .Pa /etc/rc.shutdown is run to shut them down when the jail is removed. If you are running a single application in the jail, substitute the command used to start the application for .Dq /bin/sh /etc/rc ; there may be some script available to cleanly shut down the application, or it may be sufficient to go without a stop command, and have .Nm send .Dv SIGTERM to the application. .Pp Start the jail by running: .Bd -literal -offset indent jail -c testjail .Ed .Pp A few warnings may be produced; however, it should all work properly. You should be able to see .Xr inetd 8 , .Xr syslogd 8 , and other processes running within the jail using .Xr ps 1 , with the .Ql J flag appearing beside jailed processes. To see an active list of jails, use .Xr jls 8 . If .Xr sshd 8 is enabled in the jail environment, you should be able to .Xr ssh 1 to the hostname or IP address of the jailed environment, and log in using the accounts you created previously. .Pp It is possible to have jails started at boot time. Please refer to the .Dq jail_* variables in .Xr rc.conf 5 for more information. .Ss "Managing the Jail" Normal machine shutdown commands, such as .Xr halt 8 , .Xr reboot 8 , and .Xr shutdown 8 , cannot be used successfully within the jail. To kill all processes from within a jail, you may use one of the following commands, depending on what you want to accomplish: .Bd -literal -offset indent kill -TERM -1 kill -KILL -1 .Ed .Pp This will send the .Dv SIGTERM or .Dv SIGKILL signals to all processes in the jail \(em be careful not to run this from the host environment! Once all of the jail's processes have died, unless the jail was created with the .Va persist parameter, the jail will be removed. Depending on the intended use of the jail, you may also want to run .Pa /etc/rc.shutdown from within the jail. .Pp To shut down the jail from the outside, simply remove it with: .Bd -literal -offset indent jail -r .Ed .Pp which will run any commands specified by .Va exec.stop , and then send .Dv SIGTERM and eventually .Dv SIGKILL to any remaining jailed processes. .Pp The .Pa /proc/ Ns Ar pid Ns Pa /status file contains, as its last field, the name of the jail in which the process runs, or .Dq Li - to indicate that the process is not running within a jail. The .Xr ps 1 command also shows a .Ql J flag for processes in a jail. .Pp You can also list/kill processes based on their jail ID. To show processes and their jail ID, use the following command: .Pp .Dl "ps ax -o pid,jid,args" .Pp To show and then kill processes in jail number 3 use the following commands: .Bd -literal -offset indent pgrep -lfj 3 pkill -j 3 .Ed or: .Pp .Dl "killall -j 3" .Ss "Jails and File Systems" It is not possible to .Xr mount 8 or .Xr umount 8 any file system inside a jail unless the file system is marked jail-friendly, the jail's .Va allow.mount parameter is set, and the jail's .Va enforce_statfs parameter is lower than 2. .Pp Multiple jails sharing the same file system can influence each other. For example, a user in one jail can fill the file system, leaving no space for processes in the other jail. Trying to use .Xr quota 1 to prevent this will not work either, as the file system quotas are not aware of jails but only look at the user and group IDs. This means the same user ID in two jails share a single file system quota. One would need to use one file system per jail to make this work. .Ss "Sysctl MIB Entries" The read-only entry .Va security.jail.jailed can be used to determine if a process is running inside a jail (value is one) or not (value is zero). .Pp The variable .Va security.jail.jail_max_af_ips determines how may address per address family a jail may have. The default is 255. .Pp Some MIB variables have per-jail settings. Changes to these variables by a jailed process do not affect the host environment, only the jail environment. These variables are .Va kern.securelevel , .Va security.bsd.suser_enabled , .Va kern.hostname , .Va kern.domainname , .Va kern.hostid , and .Va kern.hostuuid . .Ss "Hierarchical Jails" By setting a jail's .Va children.max parameter, processes within a jail may be able to create jails of their own. These child jails are kept in a hierarchy, with jails only able to see and/or modify the jails they created (or those jails' children). Each jail has a read-only .Va parent parameter, containing the .Va jid of the jail that created it; a .Va jid of 0 indicates the jail is a child of the current jail (or is a top-level jail if the current process isn't jailed). .Pp Jailed processes are not allowed to confer greater permissions than they themselves are given, e.g., if a jail is created with .Va allow.nomount , it is not able to create a jail with .Va allow.mount set. Similarly, such restrictions as .Va ip4.addr and .Va securelevel may not be bypassed in child jails. .Pp A child jail may in turn create its own child jails if its own .Va children.max parameter is set (remember it is zero by default). These jails are visible to and can be modified by their parent and all ancestors. .Pp Jail names reflect this hierarchy, with a full name being an MIB-type string separated by dots. For example, if a base system process creates a jail .Dq foo , and a process under that jail creates another jail .Dq bar , then the second jail will be seen as .Dq foo.bar in the base system (though it is only seen as .Dq bar to any processes inside jail .Dq foo ) . Jids on the other hand exist in a single space, and each jail must have a unique jid. .Pp Like the names, a child jail's .Va path appears relative to its creator's own .Va path . This is by virtue of the child jail being created in the chrooted environment of the first jail. .Sh SEE ALSO .Xr killall 1 , .Xr lsvfs 1 , .Xr newaliases 1 , .Xr pgrep 1 , .Xr pkill 1 , .Xr ps 1 , .Xr quota 1 , .Xr jail_set 2 , .Xr vmm 4 , .Xr devfs 5 , .Xr fdescfs 5 , .Xr jail.conf 5 , .Xr linprocfs 5 , .Xr linsysfs 5 , .Xr procfs 5 , .Xr rc.conf 5 , .Xr sysctl.conf 5 , .Xr bsdconfig 8 , .Xr chroot 8 , .Xr devfs 8 , .Xr halt 8 , .Xr ifconfig 8 , .Xr inetd 8 , .Xr jexec 8 , .Xr jls 8 , .Xr mount 8 , .Xr mountd 8 , .Xr nfsd 8 , .Xr reboot 8 , .Xr rpcbind 8 , .Xr sendmail 8 , .Xr shutdown 8 , .Xr sysctl 8 , .Xr syslogd 8 , .Xr umount 8 , .Xr zfs-jail 8 , .Xr extattr 9 .Sh HISTORY The .Nm utility appeared in .Fx 4.0 . Hierarchical/extensible jails were introduced in .Fx 8.0 . The configuration file was introduced in .Fx 9.1 . .Sh AUTHORS .An -nosplit The jail feature was written by .An Poul-Henning Kamp for R&D Associates who contributed it to .Fx . .Pp .An Robert Watson wrote the extended documentation, found a few bugs, added a few new features, and cleaned up the userland jail environment. .Pp .An Bjoern A. Zeeb added multi-IP jail support for IPv4 and IPv6 based on a patch originally done by .An Pawel Jakub Dawidek for IPv4. .Pp .An James Gritton added the extensible jail parameters, hierarchical jails, and the configuration file. .Sh BUGS It might be a good idea to add an address alias flag such that daemons listening on all IPs .Pq Dv INADDR_ANY will not bind on that address, which would facilitate building a safe host environment such that host daemons do not impose on services offered from within jails. Currently, the simplest answer is to minimize services offered on the host, possibly limiting it to services offered from .Xr inetd 8 which is easily configurable. .Sh NOTES Great care should be taken when managing directories visible within the jail. For example, if a jailed process has its current working directory set to a directory that is moved out of the jail's chroot, then the process may gain access to the file space outside of the jail. It is recommended that directories always be copied, rather than moved, out of a jail. .Pp In addition, there are several ways in which an unprivileged user outside the jail can cooperate with a privileged user inside the jail and thereby obtain elevated privileges in the host environment. Most of these attacks can be mitigated by ensuring that the jail root is not accessible to unprivileged users in the host environment. Regardless, as a general rule, untrusted users with privileged access to a jail should not be given access to the host environment. diff --git a/usr.sbin/jail/jail.c b/usr.sbin/jail/jail.c index df0a32321794..53e05870ff26 100644 --- a/usr.sbin/jail/jail.c +++ b/usr.sbin/jail/jail.c @@ -1,1014 +1,1048 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 1999 Poul-Henning Kamp. * Copyright (c) 2009-2012 James Gritton * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "jailp.h" #define JP_RDTUN(jp) (((jp)->jp_ctltype & CTLFLAG_RDTUN) == CTLFLAG_RDTUN) struct permspec { const char *name; enum intparam ipnum; int rev; }; int iflag; int note_remove; int verbose; const char *separator = "\t"; static void clear_persist(struct cfjail *j); static int update_jail(struct cfjail *j); static int rdtun_params(struct cfjail *j, int dofail); static void running_jid(struct cfjail *j); static void jail_quoted_warnx(const struct cfjail *j, const char *name_msg, const char *noname_msg); static int jailparam_set_note(const struct cfjail *j, struct jailparam *jp, unsigned njp, int flags); static void print_jail(FILE *fp, struct cfjail *j, int oldcl, int running); static void print_param(FILE *fp, const struct cfparam *p, int sep, int doname); static void show_jails(void); static void quoted_print(FILE *fp, char *str); static void usage(void) __dead2; static struct permspec perm_sysctl[] = { { "security.jail.set_hostname_allowed", KP_ALLOW_SET_HOSTNAME, 0 }, { "security.jail.sysvipc_allowed", KP_ALLOW_SYSVIPC, 0 }, { "security.jail.allow_raw_sockets", KP_ALLOW_RAW_SOCKETS, 0 }, { "security.jail.chflags_allowed", KP_ALLOW_CHFLAGS, 0 }, { "security.jail.mount_allowed", KP_ALLOW_MOUNT, 0 }, { "security.jail.socket_unixiproute_only", KP_ALLOW_SOCKET_AF, 1 }, }; static const enum intparam startcommands[] = { IP__NULL, IP_EXEC_PREPARE, #ifdef INET IP__IP4_IFADDR, #endif #ifdef INET6 IP__IP6_IFADDR, #endif IP_MOUNT, IP__MOUNT_FROM_FSTAB, IP_MOUNT_DEVFS, IP_MOUNT_FDESCFS, IP_MOUNT_PROCFS, IP_EXEC_PRESTART, IP__OP, IP_EXEC_CREATED, IP_ZFS_DATASET, IP_VNET_INTERFACE, IP_EXEC_START, IP_COMMAND, IP_EXEC_POSTSTART, IP__NULL }; static const enum intparam stopcommands[] = { IP__NULL, IP_EXEC_PRESTOP, IP_EXEC_STOP, IP_STOP_TIMEOUT, IP__OP, IP_EXEC_POSTSTOP, IP_MOUNT_PROCFS, IP_MOUNT_FDESCFS, IP_MOUNT_DEVFS, IP__MOUNT_FROM_FSTAB, IP_MOUNT, #ifdef INET6 IP__IP6_IFADDR, #endif #ifdef INET IP__IP4_IFADDR, #endif IP_EXEC_RELEASE, IP__NULL }; +static const enum intparam cleancommands[] = { + IP__NULL, + IP_EXEC_POSTSTOP, + IP_MOUNT_PROCFS, + IP_MOUNT_FDESCFS, + IP_MOUNT_DEVFS, + IP__MOUNT_FROM_FSTAB, + IP_MOUNT, +#ifdef INET6 + IP__IP6_IFADDR, +#endif +#ifdef INET + IP__IP4_IFADDR, +#endif + IP_EXEC_RELEASE, + IP__NULL +}; + int main(int argc, char **argv) { struct stat st; FILE *jfp; struct cfjail *j; char *JidFile; const char *cfname; size_t sysvallen; unsigned op, pi; int ch, docf, dying_warned, error, i, oldcl, sysval; int dflag, eflag, Rflag; #if defined(INET) || defined(INET6) char *cs, *ncs; #endif #if defined(INET) && defined(INET6) struct in6_addr addr6; #endif op = 0; dflag = eflag = Rflag = 0; docf = 1; cfname = CONF_FILE; JidFile = NULL; - while ((ch = getopt(argc, argv, "cde:f:hiJ:lmn:p:qrRs:u:U:v")) != -1) { + while ((ch = getopt(argc, argv, "cCde:f:hiJ:lmn:p:qrRs:u:U:v")) != -1) { switch (ch) { case 'c': op |= JF_START; break; + case 'C': + op |= JF_CLEANUP; + break; case 'd': dflag = 1; break; case 'e': eflag = 1; separator = optarg; break; case 'f': cfname = optarg; break; case 'h': #if defined(INET) || defined(INET6) add_param(NULL, NULL, IP_IP_HOSTNAME, NULL); #endif docf = 0; break; case 'i': iflag = 1; verbose = -1; break; case 'J': JidFile = optarg; break; case 'l': add_param(NULL, NULL, IP_EXEC_CLEAN, NULL); docf = 0; break; case 'm': op |= JF_SET; break; case 'n': add_param(NULL, NULL, KP_NAME, optarg); docf = 0; break; case 'p': paralimit = strtol(optarg, NULL, 10); if (paralimit == 0) paralimit = -1; break; case 'q': verbose = -1; break; case 'r': op |= JF_STOP; break; case 'R': op |= JF_STOP; Rflag = 1; break; case 's': add_param(NULL, NULL, KP_SECURELEVEL, optarg); docf = 0; break; case 'u': add_param(NULL, NULL, IP_EXEC_JAIL_USER, optarg); add_param(NULL, NULL, IP_EXEC_SYSTEM_JAIL_USER, NULL); docf = 0; break; case 'U': add_param(NULL, NULL, IP_EXEC_JAIL_USER, optarg); add_param(NULL, NULL, IP_EXEC_SYSTEM_JAIL_USER, "false"); docf = 0; break; case 'v': verbose = 1; break; default: usage(); } } argc -= optind; argv += optind; if (eflag) { /* Just print list of all configured non-wildcard jails */ if (op || argc > 0) usage(); load_config(cfname); show_jails(); exit(0); } /* Find out which of the command line styles this is. */ oldcl = 0; if (!op) { /* Old-style command line with four fixed parameters */ if (argc < 4 || argv[0][0] != '/') usage(); op = JF_START; docf = 0; oldcl = 1; add_param(NULL, NULL, KP_PATH, argv[0]); add_param(NULL, NULL, KP_HOST_HOSTNAME, argv[1]); #if defined(INET) || defined(INET6) if (argv[2][0] != '\0') { for (cs = argv[2];; cs = ncs + 1) { ncs = strchr(cs, ','); if (ncs) *ncs = '\0'; add_param(NULL, NULL, #if defined(INET) && defined(INET6) inet_pton(AF_INET6, cs, &addr6) == 1 ? KP_IP6_ADDR : KP_IP4_ADDR, #elif defined(INET) KP_IP4_ADDR, #elif defined(INET6) KP_IP6_ADDR, #endif cs); if (!ncs) break; } } #endif for (i = 3; i < argc; i++) add_param(NULL, NULL, IP_COMMAND, argv[i]); /* Emulate the defaults from security.jail.* sysctls. */ sysvallen = sizeof(sysval); if (sysctlbyname("security.jail.jailed", &sysval, &sysvallen, NULL, 0) == 0 && sysval == 0) { for (pi = 0; pi < sizeof(perm_sysctl) / sizeof(perm_sysctl[0]); pi++) { sysvallen = sizeof(sysval); if (sysctlbyname(perm_sysctl[pi].name, &sysval, &sysvallen, NULL, 0) == 0) add_param(NULL, NULL, perm_sysctl[pi].ipnum, (sysval ? 1 : 0) ^ perm_sysctl[pi].rev ? NULL : "false"); } } } else if (op == JF_STOP) { /* Jail remove, perhaps using the config file */ if (!docf || argc == 0) usage(); if (!Rflag) for (i = 0; i < argc; i++) if (strchr(argv[i], '=')) usage(); if ((docf = !Rflag && (!strcmp(cfname, "-") || stat(cfname, &st) == 0))) load_config(cfname); note_remove = docf || argc > 1 || wild_jail_name(argv[0]); } else if (argc > 1 || (argc == 1 && strchr(argv[0], '='))) { /* Single jail specified on the command line */ - if (Rflag) + if (Rflag || (op & JF_CLEANUP)) usage(); docf = 0; for (i = 0; i < argc; i++) { if (!strncmp(argv[i], "command", 7) && (argv[i][7] == '\0' || argv[i][7] == '=')) { if (argv[i][7] == '=') add_param(NULL, NULL, IP_COMMAND, argv[i] + 8); for (i++; i < argc; i++) add_param(NULL, NULL, IP_COMMAND, argv[i]); } #ifdef INET else if (!strncmp(argv[i], "ip4.addr=", 9)) { for (cs = argv[i] + 9;; cs = ncs + 1) { ncs = strchr(cs, ','); if (ncs) *ncs = '\0'; add_param(NULL, NULL, KP_IP4_ADDR, cs); if (!ncs) break; } } #endif #ifdef INET6 else if (!strncmp(argv[i], "ip6.addr=", 9)) { for (cs = argv[i] + 9;; cs = ncs + 1) { ncs = strchr(cs, ','); if (ncs) *ncs = '\0'; add_param(NULL, NULL, KP_IP6_ADDR, cs); if (!ncs) break; } } #endif else add_param(NULL, NULL, 0, argv[i]); } } else { /* From the config file, perhaps with a specified jail */ if (Rflag || !docf) usage(); load_config(cfname); } /* Find out which jails will be run. */ dep_setup(docf); error = 0; - if (op == JF_STOP) { + if ((op & JF_OP_MASK) == JF_STOP) { for (i = 0; i < argc; i++) if (start_state(argv[i], docf, op, Rflag) < 0) error = 1; } else { if (start_state(argv[0], docf, op, 0) < 0) exit(1); } jfp = NULL; if (JidFile != NULL) { jfp = fopen(JidFile, "w"); if (jfp == NULL) err(1, "open %s", JidFile); setlinebuf(jfp); } setlinebuf(stdout); /* * The main loop: Get an available jail and perform the required * operation on it. When that is done, the jail may be finished, * or it may go back for the next step. */ dying_warned = 0; while ((j = next_jail())) { if (j->flags & JF_FAILED) { error = 1; if (j->comparam == NULL) { dep_done(j, 0); continue; } } if (!(j->flags & JF_PARAMS)) { j->flags |= JF_PARAMS; if (dflag) add_param(j, NULL, IP_ALLOW_DYING, NULL); if (check_intparams(j) < 0) continue; if ((j->flags & (JF_START | JF_SET)) && import_params(j) < 0) continue; } if (j->intparams[IP_ALLOW_DYING] && !dying_warned) { warnx("%s", "the 'allow.dying' parameter and '-d' flag " "are deprecated and have no effect."); dying_warned = 1; } if (!j->jid) running_jid(j); if (finish_command(j)) continue; switch (j->flags & JF_OP_MASK) { /* * These operations just turn into a different op * depending on the jail's current status. */ case JF_START_SET: - j->flags = j->jid < 0 ? JF_START : JF_SET; + j->flags = j->jid < 0 + ? (j->flags & JF_CLEANUP) | JF_START : JF_SET; break; case JF_SET_RESTART: - if (j->jid < 0) { + if (j->jid < 0 && !(j->flags & JF_CLEANUP)) { jail_quoted_warnx(j, "not found", "no jail specified"); failed(j); continue; } - j->flags = rdtun_params(j, 0) ? JF_RESTART : JF_SET; + j->flags = rdtun_params(j, 0) + ? (j->flags & JF_CLEANUP) | JF_RESTART : JF_SET; if (j->flags == JF_RESTART) dep_reset(j); break; case JF_START_SET_RESTART: - j->flags = j->jid < 0 ? JF_START - : rdtun_params(j, 0) ? JF_RESTART : JF_SET; + j->flags = j->jid < 0 ? JF_START : rdtun_params(j, 0) + ? (j->flags & JF_CLEANUP) | JF_RESTART : JF_SET; if (j->flags == JF_RESTART) dep_reset(j); } switch (j->flags & JF_OP_MASK) { case JF_START: if (j->comparam == NULL) { if (j->jid > 0 && !(j->flags & (JF_DEPEND | JF_WILD))) { jail_quoted_warnx(j, "already exists", NULL); failed(j); continue; } if (dep_check(j)) continue; if (j->jid > 0) goto jail_create_done; + if (j->flags & JF_CLEANUP) { + j->flags |= JF_STOP; + j->comparam = cleancommands; + } else + j->comparam = startcommands; j->comparam = startcommands; j->comstring = NULL; } if (next_command(j)) continue; + if (j->flags & JF_STOP) + goto jail_remove_done; jail_create_done: clear_persist(j); if (jfp != NULL) print_jail(jfp, j, oldcl, 1); dep_done(j, 0); break; case JF_SET: if (j->jid < 0 && !(j->flags & JF_DEPEND)) { jail_quoted_warnx(j, "not found", "no jail specified"); failed(j); continue; } if (dep_check(j)) continue; if (!(j->flags & JF_DEPEND)) { if (rdtun_params(j, 1) < 0 || update_jail(j) < 0) continue; if (verbose >= 0 && (j->name || verbose > 0)) jail_note(j, "updated\n"); } dep_done(j, 0); break; case JF_STOP: case JF_RESTART: if (j->comparam == NULL) { if (dep_check(j)) continue; - if (j->jid < 0) { + if (j->flags & JF_CLEANUP) { + j->comparam = j->jid < 0 + ? cleancommands : stopcommands; + } else if (j->jid < 0) { if (!(j->flags & (JF_DEPEND|JF_WILD))) { if (verbose >= 0) jail_quoted_warnx(j, "not found", NULL); failed(j); } goto jail_remove_done; } - j->comparam = stopcommands; + else + j->comparam = stopcommands; j->comstring = NULL; } else if ((j->flags & JF_FAILED) && j->jid > 0) goto jail_remove_done; if (next_command(j)) continue; jail_remove_done: dep_done(j, 0); if ((j->flags & (JF_START | JF_FAILED)) == JF_START) { j->comparam = NULL; - j->flags &= ~JF_STOP; + j->flags &= ~(JF_STOP | JF_CLEANUP); dep_reset(j); requeue(j, j->ndeps ? &depend : &ready); } break; } } if (jfp != NULL) fclose(jfp); exit(error); } /* * Mark a jail's failure for future handling. */ void failed(struct cfjail *j) { j->flags |= JF_FAILED; TAILQ_REMOVE(j->queue, j, tq); TAILQ_INSERT_HEAD(&ready, j, tq); j->queue = &ready; } /* * Exit slightly more gracefully when out of memory. */ void * emalloc(size_t size) { void *p; p = malloc(size); if (!p) err(1, "malloc"); return p; } void * erealloc(void *ptr, size_t size) { void *p; p = realloc(ptr, size); if (!p) err(1, "malloc"); return p; } char * estrdup(const char *str) { char *ns; ns = strdup(str); if (!ns) err(1, "malloc"); return ns; } /* * Print a message including an optional jail name. */ void jail_note(const struct cfjail *j, const char *fmt, ...) { va_list ap, tap; char *cs; size_t len; va_start(ap, fmt); va_copy(tap, ap); len = vsnprintf(NULL, 0, fmt, tap); va_end(tap); cs = alloca(len + 1); (void)vsnprintf(cs, len + 1, fmt, ap); va_end(ap); if (j->name) printf("%s: %s", j->name, cs); else printf("%s", cs); } /* * Print a warning message including an optional jail name. */ void jail_warnx(const struct cfjail *j, const char *fmt, ...) { va_list ap, tap; char *cs; size_t len; va_start(ap, fmt); va_copy(tap, ap); len = vsnprintf(NULL, 0, fmt, tap); va_end(tap); cs = alloca(len + 1); (void)vsnprintf(cs, len + 1, fmt, ap); va_end(ap); if (j->name) warnx("%s: %s", j->name, cs); else warnx("%s", cs); } /* * Create a new jail. */ int create_jail(struct cfjail *j) { struct stat st; struct jailparam *jp, *setparams, *sjp; const char *path; int dopersist, ns; /* * Check the jail's path, with a better error message than jail_set * gives. */ if ((path = string_param(j->intparams[KP_PATH]))) { if (j->name != NULL && path[0] != '/') { jail_warnx(j, "path %s: not an absolute pathname", path); return -1; } if (stat(path, &st) < 0) { jail_warnx(j, "path %s: %s", path, strerror(errno)); return -1; } if (!S_ISDIR(st.st_mode)) { jail_warnx(j, "path %s: %s", path, strerror(ENOTDIR)); return -1; } } /* * Copy all the parameters, except that "persist" is always set when * there are commands to run later. */ dopersist = !bool_param(j->intparams[KP_PERSIST]) && (j->intparams[IP_EXEC_START] || j->intparams[IP_COMMAND] || j->intparams[IP_EXEC_POSTSTART]); sjp = setparams = alloca((j->njp + dopersist) * sizeof(struct jailparam)); if (dopersist && jailparam_init(sjp++, "persist") < 0) { jail_warnx(j, "%s", jail_errmsg); return -1; } for (jp = j->jp; jp < j->jp + j->njp; jp++) if (!dopersist || !equalopts(jp->jp_name, "persist")) *sjp++ = *jp; ns = sjp - setparams; j->jid = jailparam_set_note(j, setparams, ns, JAIL_CREATE); if (j->jid < 0) { jail_warnx(j, "%s", jail_errmsg); failed(j); } if (dopersist) { jailparam_free(setparams, 1); if (j->jid > 0) j->flags |= JF_PERSIST; } return j->jid; } /* * Remove a temporarily set "persist" parameter. */ static void clear_persist(struct cfjail *j) { struct iovec jiov[4]; int jid; if (!(j->flags & JF_PERSIST)) return; j->flags &= ~JF_PERSIST; jiov[0].iov_base = __DECONST(char *, "jid"); jiov[0].iov_len = sizeof("jid"); jiov[1].iov_base = &j->jid; jiov[1].iov_len = sizeof(j->jid); jiov[2].iov_base = __DECONST(char *, "nopersist"); jiov[2].iov_len = sizeof("nopersist"); jiov[3].iov_base = NULL; jiov[3].iov_len = 0; jid = jail_set(jiov, 4, JAIL_UPDATE); if (verbose > 0) jail_note(j, "jail_set(JAIL_UPDATE) jid=%d nopersist%s%s\n", j->jid, jid < 0 ? ": " : "", jid < 0 ? strerror(errno) : ""); } /* * Set a jail's parameters. */ static int update_jail(struct cfjail *j) { struct jailparam *jp, *setparams, *sjp; int ns, jid; ns = 0; for (jp = j->jp; jp < j->jp + j->njp; jp++) if (!JP_RDTUN(jp)) ns++; if (ns == 0) return 0; sjp = setparams = alloca(++ns * sizeof(struct jailparam)); if (jailparam_init(sjp, "jid") < 0 || jailparam_import_raw(sjp, &j->jid, sizeof j->jid) < 0) { jail_warnx(j, "%s", jail_errmsg); failed(j); return -1; } for (jp = j->jp; jp < j->jp + j->njp; jp++) if (!JP_RDTUN(jp)) *++sjp = *jp; jid = jailparam_set_note(j, setparams, ns, JAIL_UPDATE); if (jid < 0) { jail_warnx(j, "%s", jail_errmsg); failed(j); } jailparam_free(setparams, 1); return jid; } /* * Return if a jail set would change any create-only parameters. */ static int rdtun_params(struct cfjail *j, int dofail) { struct jailparam *jp, *rtparams, *rtjp; const void *jp_value; size_t jp_valuelen; int nrt, rval, bool_true; if (j->flags & JF_RDTUN) return 0; j->flags |= JF_RDTUN; nrt = 0; for (jp = j->jp; jp < j->jp + j->njp; jp++) if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid")) nrt++; if (nrt == 0) return 0; rtjp = rtparams = alloca(++nrt * sizeof(struct jailparam)); if (jailparam_init(rtjp, "jid") < 0 || jailparam_import_raw(rtjp, &j->jid, sizeof j->jid) < 0) { jail_warnx(j, "%s", jail_errmsg); exit(1); } for (jp = j->jp; jp < j->jp + j->njp; jp++) if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid")) { *++rtjp = *jp; rtjp->jp_value = NULL; } rval = 0; if (jailparam_get(rtparams, nrt, 0) > 0) { rtjp = rtparams + 1; for (jp = j->jp; rtjp < rtparams + nrt; jp++) { if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid")) { jp_value = jp->jp_value; jp_valuelen = jp->jp_valuelen; if (jp_value == NULL && jp_valuelen > 0) { if (jp->jp_flags & (JP_BOOL | JP_NOBOOL | JP_JAILSYS)) { bool_true = 1; jp_value = &bool_true; jp_valuelen = sizeof(bool_true); } else if ((jp->jp_ctltype & CTLTYPE) == CTLTYPE_STRING) jp_value = ""; else jp_valuelen = 0; } if (rtjp->jp_valuelen != jp_valuelen || (CTLTYPE_STRING ? strncmp(rtjp->jp_value, jp_value, jp_valuelen) : memcmp(rtjp->jp_value, jp_value, jp_valuelen))) { if (dofail) { jail_warnx(j, "%s cannot be " "changed after creation", jp->jp_name); failed(j); rval = -1; } else rval = 1; break; } rtjp++; } } } for (rtjp = rtparams + 1; rtjp < rtparams + nrt; rtjp++) rtjp->jp_name = NULL; jailparam_free(rtparams, nrt); return rval; } /* * Get the jail's jid if it is running. */ static void running_jid(struct cfjail *j) { struct iovec jiov[2]; const char *pval; char *ep; int jid; if ((pval = string_param(j->intparams[KP_JID]))) { if (!(jid = strtol(pval, &ep, 10)) || *ep) { j->jid = -1; return; } jiov[0].iov_base = __DECONST(char *, "jid"); jiov[0].iov_len = sizeof("jid"); jiov[1].iov_base = &jid; jiov[1].iov_len = sizeof(jid); } else if ((pval = string_param(j->intparams[KP_NAME]))) { jiov[0].iov_base = __DECONST(char *, "name"); jiov[0].iov_len = sizeof("name"); jiov[1].iov_len = strlen(pval) + 1; jiov[1].iov_base = alloca(jiov[1].iov_len); strcpy(jiov[1].iov_base, pval); } else { j->jid = -1; return; } j->jid = jail_get(jiov, 2, 0); } static void jail_quoted_warnx(const struct cfjail *j, const char *name_msg, const char *noname_msg) { const char *pval; if ((pval = j->name) || (pval = string_param(j->intparams[KP_JID])) || (pval = string_param(j->intparams[KP_NAME]))) warnx("\"%s\" %s", pval, name_msg); else warnx("%s", noname_msg); } /* * Set jail parameters and possibly print them out. */ static int jailparam_set_note(const struct cfjail *j, struct jailparam *jp, unsigned njp, int flags) { char *value; int jid; unsigned i; jid = jailparam_set(jp, njp, flags); if (verbose > 0) { jail_note(j, "jail_set(%s)", (flags & (JAIL_CREATE | JAIL_UPDATE)) == JAIL_CREATE ? "JAIL_CREATE" : "JAIL_UPDATE"); for (i = 0; i < njp; i++) { printf(" %s", jp[i].jp_name); if (jp[i].jp_value == NULL) continue; putchar('='); value = jailparam_export(jp + i); if (value == NULL) err(1, "jailparam_export"); quoted_print(stdout, value); free(value); } if (jid < 0) printf(": %s", strerror(errno)); printf("\n"); } return jid; } /* * Print a jail record. */ static void print_jail(FILE *fp, struct cfjail *j, int oldcl, int running) { struct cfparam *p; int printsep; if (oldcl) { if (running) fprintf(fp, "%d%s", j->jid, separator); print_param(fp, j->intparams[KP_PATH], ',', 0); fputs(separator, fp); print_param(fp, j->intparams[KP_HOST_HOSTNAME], ',', 0); fputs(separator, fp); #ifdef INET print_param(fp, j->intparams[KP_IP4_ADDR], ',', 0); #ifdef INET6 if (j->intparams[KP_IP4_ADDR] && !TAILQ_EMPTY(&j->intparams[KP_IP4_ADDR]->val) && j->intparams[KP_IP6_ADDR] && !TAILQ_EMPTY(&j->intparams[KP_IP6_ADDR]->val)) putc(',', fp); #endif #endif #ifdef INET6 print_param(fp, j->intparams[KP_IP6_ADDR], ',', 0); #endif fputs(separator, fp); print_param(fp, j->intparams[IP_COMMAND], ' ', 0); } else { printsep = 0; if (running) { fprintf(fp, "jid=%d", j->jid); printsep = 1; } TAILQ_FOREACH(p, &j->params, tq) if (strcmp(p->name, "jid")) { if (printsep) fputs(separator, fp); else printsep = 1; print_param(fp, p, ',', 1); } } putc('\n', fp); } /* * Exhibit list of all configured non-wildcard jails */ static void show_jails(void) { struct cfjail *j; TAILQ_FOREACH(j, &cfjails, tq) print_jail(stdout, j, 0, 0); } /* * Print a parameter value, or a name=value pair. */ static void print_param(FILE *fp, const struct cfparam *p, int sep, int doname) { const struct cfstring *s, *ts; if (doname) fputs(p->name, fp); if (p == NULL || TAILQ_EMPTY(&p->val)) return; if (doname) putc('=', fp); TAILQ_FOREACH_SAFE(s, &p->val, tq, ts) { quoted_print(fp, s->s); if (ts != NULL) putc(sep, fp); } } /* * Print a string with quotes around spaces. */ static void quoted_print(FILE *fp, char *str) { int c, qc; char *p = str; qc = !*p ? '"' : strchr(p, '\'') ? '"' : strchr(p, '"') ? '\'' : strchr(p, ' ') || strchr(p, '\t') ? '"' : 0; if (qc) putc(qc, fp); while ((c = *p++)) { if (c == '\\' || c == qc) putc('\\', fp); putc(c, fp); } if (qc) putc(qc, fp); } static void usage(void) { (void)fprintf(stderr, "usage: jail [-dhilqv] [-J jid_file] [-u username] [-U username]\n" " -[cmr] param=value ... [command=command ...]\n" " jail [-dqv] [-f file] -[cmr] [jail]\n" " jail [-qv] [-f file] -[rR] ['*' | jail ...]\n" " jail [-dhilqv] [-J jid_file] [-u username] [-U username]\n" " [-n jailname] [-s securelevel]\n" " path hostname ip[,...] command ...\n" " jail [-f file] -e separator\n"); exit(1); } diff --git a/usr.sbin/jail/jailp.h b/usr.sbin/jail/jailp.h index 74ef2a8acab8..ccd96f5f247e 100644 --- a/usr.sbin/jail/jailp.h +++ b/usr.sbin/jail/jailp.h @@ -1,253 +1,254 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2011 James Gritton. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #define CONF_FILE "/etc/jail.conf" #define DEP_FROM 0 #define DEP_TO 1 #define DF_SEEN 0x01 /* Dependency has been followed */ #define DF_LIGHT 0x02 /* Implied dependency on jail existence only */ #define DF_NOFAIL 0x04 /* Don't propagate failed jails */ #define PF_VAR 0x0001 /* This is a variable, not a true parameter */ #define PF_APPEND 0x0002 /* Append to existing parameter list */ #define PF_BAD 0x0004 /* Unable to resolve parameter value */ #define PF_INTERNAL 0x0008 /* Internal parameter, not passed to kernel */ #define PF_BOOL 0x0010 /* Boolean parameter */ #define PF_INT 0x0020 /* Integer parameter */ #define PF_CONV 0x0040 /* Parameter duplicated in converted form */ #define PF_REV 0x0080 /* Run commands in reverse order on stopping */ #define PF_IMMUTABLE 0x0100 /* Immutable parameter */ #define PF_NAMEVAL 0x0200 /* Parameter is in "name value" form */ #define JF_START 0x0001 /* -c */ #define JF_SET 0x0002 /* -m */ #define JF_STOP 0x0004 /* -r */ #define JF_DEPEND 0x0008 /* Operation required by dependency */ #define JF_WILD 0x0010 /* Not specified on the command line */ #define JF_FAILED 0x0020 /* Operation failed */ #define JF_PARAMS 0x0040 /* Parameters checked and imported */ #define JF_RDTUN 0x0080 /* Create-only parameter check has been done */ #define JF_PERSIST 0x0100 /* Jail is temporarily persistent */ #define JF_TIMEOUT 0x0200 /* A command (or process kill) timed out */ #define JF_SLEEPQ 0x0400 /* Waiting on a command and/or timeout */ #define JF_FROM_RUNQ 0x0800 /* Has already been on the run queue */ +#define JF_CLEANUP 0x1000 /* -C Run post-removal commands */ #define JF_OP_MASK (JF_START | JF_SET | JF_STOP) #define JF_RESTART (JF_START | JF_STOP) #define JF_START_SET (JF_START | JF_SET) #define JF_SET_RESTART (JF_SET | JF_STOP) #define JF_START_SET_RESTART (JF_START | JF_SET | JF_STOP) #define JF_DO_STOP(js) (((js) & (JF_SET | JF_STOP)) == JF_STOP) enum intparam { IP__NULL = 0, /* Null command */ IP_ALLOW_DYING, /* Allow making changes to a dying jail */ IP_COMMAND, /* Command run inside jail at creation */ IP_DEPEND, /* Jail starts after (stops before) another */ IP_EXEC_CLEAN, /* Run commands in a clean environment */ IP_EXEC_CONSOLELOG, /* Redirect optput for commands run in jail */ IP_EXEC_FIB, /* Run jailed commands with this FIB */ IP_EXEC_JAIL_USER, /* Run jailed commands as this user */ IP_EXEC_POSTSTART, /* Commands run outside jail after creating */ IP_EXEC_POSTSTOP, /* Commands run outside jail after removing */ IP_EXEC_PREPARE, /* Commands run outside jail before addrs and mounting */ IP_EXEC_PRESTART, /* Commands run outside jail before creating */ IP_EXEC_PRESTOP, /* Commands run outside jail before removing */ IP_EXEC_RELEASE, /* Commands run outside jail after addrs and unmounted */ IP_EXEC_CREATED, /* Commands run outside jail right after it was started */ IP_EXEC_START, /* Commands run inside jail on creation */ IP_EXEC_STOP, /* Commands run inside jail on removal */ IP_EXEC_SYSTEM_JAIL_USER,/* Get jail_user from system passwd file */ IP_EXEC_SYSTEM_USER, /* Run non-jailed commands as this user */ IP_EXEC_TIMEOUT, /* Time to wait for a command to complete */ #if defined(INET) || defined(INET6) IP_INTERFACE, /* Add IP addresses to this interface */ IP_IP_HOSTNAME, /* Get jail IP address(es) from hostname */ #endif IP_MOUNT, /* Mount points in fstab(5) form */ IP_MOUNT_DEVFS, /* Mount /dev under prison root */ IP_MOUNT_FDESCFS, /* Mount /dev/fd under prison root */ IP_MOUNT_PROCFS, /* Mount /proc under prison root */ IP_MOUNT_FSTAB, /* A standard fstab(5) file */ IP_STOP_TIMEOUT, /* Time to wait after sending SIGTERM */ IP_VNET_INTERFACE, /* Assign interface(s) to vnet jail */ IP_ZFS_DATASET, /* Jail ZFS datasets */ #ifdef INET IP__IP4_IFADDR, /* Copy of ip4.addr with interface/netmask */ #endif #ifdef INET6 IP__IP6_IFADDR, /* Copy of ip6.addr with interface/prefixlen */ #endif IP__MOUNT_FROM_FSTAB, /* Line from mount.fstab file */ IP__OP, /* Placeholder for requested operation */ KP_ALLOW_CHFLAGS, KP_ALLOW_MOUNT, KP_ALLOW_RAW_SOCKETS, KP_ALLOW_SET_HOSTNAME, KP_ALLOW_SOCKET_AF, KP_ALLOW_SYSVIPC, KP_DEVFS_RULESET, KP_HOST_HOSTNAME, #ifdef INET KP_IP4_ADDR, #endif #ifdef INET6 KP_IP6_ADDR, #endif KP_JID, KP_NAME, KP_PATH, KP_PERSIST, KP_SECURELEVEL, KP_VNET, IP_NPARAM }; STAILQ_HEAD(cfvars, cfvar); struct cfvar { STAILQ_ENTRY(cfvar) tq; char *name; size_t pos; }; TAILQ_HEAD(cfstrings, cfstring); struct cfstring { TAILQ_ENTRY(cfstring) tq; char *s; size_t len; struct cfvars vars; }; TAILQ_HEAD(cfparams, cfparam); struct cfparam { TAILQ_ENTRY(cfparam) tq; char *name; struct cfstrings val; unsigned flags; int gen; }; TAILQ_HEAD(cfjails, cfjail); STAILQ_HEAD(cfdepends, cfdepend); struct cfjail { TAILQ_ENTRY(cfjail) tq; char *name; char *comline; struct cfparams params; struct cfdepends dep[2]; struct cfjails *queue; struct cfjail *cfparent; struct cfparam *intparams[IP_NPARAM]; struct cfstring *comstring; struct jailparam *jp; struct timespec timeout; const enum intparam *comparam; unsigned flags; int jid; int seq; int pstatus; int ndeps; int njp; int nprocs; }; struct cfdepend { STAILQ_ENTRY(cfdepend) tq[2]; struct cfjail *j[2]; unsigned flags; }; struct cflex { const char *cfname; int error; }; extern void *emalloc(size_t); extern void *erealloc(void *, size_t); extern char *estrdup(const char *); extern int create_jail(struct cfjail *j); extern void failed(struct cfjail *j); extern void jail_note(const struct cfjail *j, const char *fmt, ...); extern void jail_warnx(const struct cfjail *j, const char *fmt, ...); extern int next_command(struct cfjail *j); extern int finish_command(struct cfjail *j); extern struct cfjail *next_proc(int nonblock); extern void load_config(const char *cfname); extern void include_config(void *scanner, const char *cfname); extern struct cfjail *add_jail(void); extern void add_param(struct cfjail *j, const struct cfparam *p, enum intparam ipnum, const char *value); extern int bool_param(const struct cfparam *p); extern int int_param(const struct cfparam *p, int *ip); extern const char *string_param(const struct cfparam *p); extern int check_intparams(struct cfjail *j); extern int import_params(struct cfjail *j); extern int equalopts(const char *opt1, const char *opt2); extern int wild_jail_name(const char *wname); extern int wild_jail_match(const char *jname, const char *wname); extern void free_param_strings(struct cfparam *p); extern void dep_setup(int docf); extern int dep_check(struct cfjail *j); extern void dep_done(struct cfjail *j, unsigned flags); extern void dep_reset(struct cfjail *j); extern struct cfjail *next_jail(void); extern int start_state(const char *target, int docf, unsigned state, int running); extern void requeue(struct cfjail *j, struct cfjails *queue); extern void requeue_head(struct cfjail *j, struct cfjails *queue); extern struct cflex *yyget_extra(void *scanner); extern FILE *yyget_in(void *scanner); extern int yyget_lineno(void *scanner); extern char *yyget_text(void *scanner); extern struct cfjails cfjails; extern struct cfjails ready; extern struct cfjails depend; extern int iflag; extern int note_remove; extern int paralimit; extern int verbose; diff --git a/usr.sbin/jail/state.c b/usr.sbin/jail/state.c index 6cbe879acc55..1d200beacef9 100644 --- a/usr.sbin/jail/state.c +++ b/usr.sbin/jail/state.c @@ -1,492 +1,492 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2011 James Gritton * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include "jailp.h" struct cfjails ready = TAILQ_HEAD_INITIALIZER(ready); struct cfjails depend = TAILQ_HEAD_INITIALIZER(depend); static void dep_add(struct cfjail *from, struct cfjail *to, unsigned flags); static int cmp_jailptr(const void *a, const void *b); static int cmp_jailptr_name(const void *a, const void *b); static struct cfjail *find_jail(const char *name); static struct cfjail *running_jail(const char *name, int flags); static struct cfjail **jails_byname; static size_t njails; /* * Set up jail dependency lists. */ void dep_setup(int docf) { struct cfjail *j, *dj; struct cfparam *p; struct cfstring *s; struct cfdepend *d; const char *cs; char *pname; size_t plen; int deps, ldeps; if (!docf) { /* * With no config file, let "depend" for a single jail * look at currently running jails. */ if ((j = TAILQ_FIRST(&cfjails)) && (p = j->intparams[IP_DEPEND])) { TAILQ_FOREACH(s, &p->val, tq) { if (running_jail(s->s, 0) == NULL) { warnx("depends on nonexistent jail " "\"%s\"", s->s); j->flags |= JF_FAILED; } } } return; } njails = 0; TAILQ_FOREACH(j, &cfjails, tq) njails++; jails_byname = emalloc(njails * sizeof(struct cfjail *)); njails = 0; TAILQ_FOREACH(j, &cfjails, tq) jails_byname[njails++] = j; qsort(jails_byname, njails, sizeof(struct cfjail *), cmp_jailptr); deps = 0; ldeps = 0; plen = 0; pname = NULL; TAILQ_FOREACH(j, &cfjails, tq) { if (j->flags & JF_FAILED) continue; if ((p = j->intparams[IP_DEPEND])) { TAILQ_FOREACH(s, &p->val, tq) { dj = find_jail(s->s); if (dj != NULL) { deps++; dep_add(j, dj, 0); } else { jail_warnx(j, "depends on undefined jail \"%s\"", s->s); j->flags |= JF_FAILED; } } } /* A jail has an implied dependency on its parent. */ if ((cs = strrchr(j->name, '.'))) { if (plen < (size_t)(cs - j->name + 1)) { plen = (cs - j->name) + 1; pname = erealloc(pname, plen); } strlcpy(pname, j->name, plen); dj = find_jail(pname); if (dj != NULL) { ldeps++; dep_add(j, dj, DF_LIGHT); } } } /* Look for dependency loops. */ if (deps && (deps > 1 || ldeps)) { (void)start_state(NULL, 0, 0, 0); while ((j = TAILQ_FIRST(&ready))) { requeue(j, &cfjails); dep_done(j, DF_NOFAIL); } while ((j = TAILQ_FIRST(&depend)) != NULL) { jail_warnx(j, "dependency loop"); j->flags |= JF_FAILED; do { requeue(j, &cfjails); dep_done(j, DF_NOFAIL); } while ((j = TAILQ_FIRST(&ready))); } TAILQ_FOREACH(j, &cfjails, tq) STAILQ_FOREACH(d, &j->dep[DEP_FROM], tq[DEP_FROM]) d->flags &= ~DF_SEEN; } if (pname != NULL) free(pname); } /* * Return if a jail has dependencies. */ int dep_check(struct cfjail *j) { int reset, depfrom, depto, ndeps, rev; struct cfjail *dj; struct cfdepend *d; static int bits[] = { 0, 1, 1, 2, 1, 2, 2, 3 }; if (j->ndeps == 0) return 0; ndeps = 0; if ((rev = JF_DO_STOP(j->flags))) { depfrom = DEP_TO; depto = DEP_FROM; } else { depfrom = DEP_FROM; depto = DEP_TO; } STAILQ_FOREACH(d, &j->dep[depfrom], tq[depfrom]) { if (d->flags & DF_SEEN) continue; dj = d->j[depto]; if (dj->flags & JF_FAILED) { if (!(j->flags & (JF_DEPEND | JF_FAILED)) && verbose >= 0) jail_warnx(j, "skipped"); j->flags |= JF_FAILED; continue; } /* * The dependee's state may be set (or changed) as a result of * being in a dependency it wasn't in earlier. */ reset = 0; if (bits[dj->flags & JF_OP_MASK] <= 1) { if (!(dj->flags & JF_OP_MASK)) { reset = 1; dj->flags |= JF_DEPEND; requeue(dj, &ready); } /* Set or change the dependee's state. */ switch (j->flags & JF_OP_MASK) { case JF_START: dj->flags |= JF_START; break; case JF_SET: if (!(dj->flags & JF_OP_MASK)) dj->flags |= JF_SET; else if (dj->flags & JF_STOP) dj->flags |= JF_START; break; case JF_STOP: case JF_RESTART: if (!(dj->flags & JF_STOP)) reset = 1; dj->flags |= JF_STOP; if (dj->flags & JF_SET) dj->flags ^= (JF_START | JF_SET); break; } } if (reset) dep_reset(dj); if (!((d->flags & DF_LIGHT) && (rev ? dj->jid < 0 : dj->jid > 0))) ndeps++; } if (ndeps == 0) return 0; requeue(j, &depend); return 1; } /* * Resolve any dependencies from a finished jail. */ void dep_done(struct cfjail *j, unsigned flags) { struct cfjail *dj; struct cfdepend *d; int depfrom, depto; if (JF_DO_STOP(j->flags)) { depfrom = DEP_TO; depto = DEP_FROM; } else { depfrom = DEP_FROM; depto = DEP_TO; } STAILQ_FOREACH(d, &j->dep[depto], tq[depto]) { if ((d->flags & DF_SEEN) | (flags & ~d->flags & DF_LIGHT)) continue; d->flags |= DF_SEEN; dj = d->j[depfrom]; if (!(flags & DF_NOFAIL) && (j->flags & JF_FAILED) && (j->flags & (JF_OP_MASK | JF_DEPEND)) != (JF_SET | JF_DEPEND)) { if (!(dj->flags & (JF_DEPEND | JF_FAILED)) && verbose >= 0) jail_warnx(dj, "skipped"); dj->flags |= JF_FAILED; } if (!--dj->ndeps && dj->queue == &depend) requeue(dj, &ready); } } /* * Count a jail's dependencies and mark them as unseen. */ void dep_reset(struct cfjail *j) { int depfrom; struct cfdepend *d; depfrom = JF_DO_STOP(j->flags) ? DEP_TO : DEP_FROM; j->ndeps = 0; STAILQ_FOREACH(d, &j->dep[depfrom], tq[depfrom]) j->ndeps++; } /* * Find the next jail ready to do something. */ struct cfjail * next_jail(void) { struct cfjail *j; if (!(j = next_proc(!TAILQ_EMPTY(&ready))) && (j = TAILQ_FIRST(&ready)) && JF_DO_STOP(j->flags) && (j = TAILQ_LAST(&ready, cfjails)) && !JF_DO_STOP(j->flags)) { TAILQ_FOREACH_REVERSE(j, &ready, cfjails, tq) if (JF_DO_STOP(j->flags)) break; } if (j != NULL) requeue(j, &cfjails); return j; } /* * Set jails to the proper start state. */ int start_state(const char *target, int docf, unsigned state, int running) { struct iovec jiov[6]; struct cfjail *j, *tj; int jid; char namebuf[MAXHOSTNAMELEN]; - if (!target || (!docf && state != JF_STOP) || + if (!target || (!docf && (state & JF_OP_MASK) != JF_STOP) || (!running && !strcmp(target, "*"))) { /* * For a global wildcard (including no target specified), * set the state on all jails and start with those that * have no dependencies. */ TAILQ_FOREACH_SAFE(j, &cfjails, tq, tj) { j->flags = (j->flags & JF_FAILED) | state | (docf ? JF_WILD : 0); dep_reset(j); requeue(j, j->ndeps ? &depend : &ready); } } else if (wild_jail_name(target)) { /* * For targets specified singly, or with a non-global wildcard, * set their state and call them ready (even if there are * dependencies). Leave everything else unqueued for now. */ if (running) { /* * -R matches its wildcards against currently running * jails, not against the config file. */ jiov[0].iov_base = __DECONST(char *, "lastjid"); jiov[0].iov_len = sizeof("lastjid"); jiov[1].iov_base = &jid; jiov[1].iov_len = sizeof(jid); jiov[2].iov_base = __DECONST(char *, "jid"); jiov[2].iov_len = sizeof("jid"); jiov[3].iov_base = &jid; jiov[3].iov_len = sizeof(jid); jiov[4].iov_base = __DECONST(char *, "name"); jiov[4].iov_len = sizeof("name"); jiov[5].iov_base = &namebuf; jiov[5].iov_len = sizeof(namebuf); for (jid = 0; jail_get(jiov, 6, 0) > 0; ) { if (wild_jail_match(namebuf, target)) { j = add_jail(); j->name = estrdup(namebuf); j->jid = jid; j->flags = (j->flags & JF_FAILED) | state | JF_WILD; dep_reset(j); requeue(j, &ready); } } } else { TAILQ_FOREACH_SAFE(j, &cfjails, tq, tj) { if (wild_jail_match(j->name, target)) { j->flags = (j->flags & JF_FAILED) | state | JF_WILD; dep_reset(j); requeue(j, &ready); } } } } else { j = find_jail(target); - if (j == NULL && state == JF_STOP) { + if (j == NULL && (state & JF_OP_MASK) == JF_STOP) { /* Allow -[rR] to specify a currently running jail. */ j = running_jail(target, JAIL_DYING); } if (j == NULL) { warnx("\"%s\" not found", target); return -1; } j->flags = (j->flags & JF_FAILED) | state; dep_reset(j); requeue(j, &ready); } return 0; } /* * Move a jail to a new list. */ void requeue(struct cfjail *j, struct cfjails *queue) { if (j->queue != queue) { TAILQ_REMOVE(j->queue, j, tq); TAILQ_INSERT_TAIL(queue, j, tq); j->queue = queue; } } void requeue_head(struct cfjail *j, struct cfjails *queue) { TAILQ_REMOVE(j->queue, j, tq); TAILQ_INSERT_HEAD(queue, j, tq); j->queue = queue; } /* * Add a dependency edge between two jails. */ static void dep_add(struct cfjail *from, struct cfjail *to, unsigned flags) { struct cfdepend *d; d = emalloc(sizeof(struct cfdepend)); d->flags = flags; d->j[DEP_FROM] = from; d->j[DEP_TO] = to; STAILQ_INSERT_TAIL(&from->dep[DEP_FROM], d, tq[DEP_FROM]); STAILQ_INSERT_TAIL(&to->dep[DEP_TO], d, tq[DEP_TO]); } /* * Compare jail pointers for qsort/bsearch. */ static int cmp_jailptr(const void *a, const void *b) { return strcmp((*((struct cfjail * const *)a))->name, ((*(struct cfjail * const *)b))->name); } static int cmp_jailptr_name(const void *a, const void *b) { return strcmp((const char *)a, ((*(struct cfjail * const *)b))->name); } /* * Find a jail object by name. */ static struct cfjail * find_jail(const char *name) { struct cfjail **jp; if (jails_byname == NULL) return NULL; jp = bsearch(name, jails_byname, njails, sizeof(struct cfjail *), cmp_jailptr_name); return jp ? *jp : NULL; } /* * Return jail if it is running, and NULL if it isn't. */ static struct cfjail * running_jail(const char *name, int flags) { struct iovec jiov[4]; struct cfjail *jail; char *ep; char jailname[MAXHOSTNAMELEN]; int jid, ret, len; if ((jid = strtol(name, &ep, 10)) && !*ep) { memset(jailname,0,sizeof(jailname)); len = sizeof(jailname); } else { strncpy(jailname, name,sizeof(jailname)); len = strlen(name) + 1; jid = 0; } jiov[0].iov_base = __DECONST(char *, "jid"); jiov[0].iov_len = sizeof("jid"); jiov[1].iov_base = &jid; jiov[1].iov_len = sizeof(jid); jiov[2].iov_base = __DECONST(char *, "name"); jiov[2].iov_len = sizeof("name"); jiov[3].iov_base = &jailname; jiov[3].iov_len = len; if ((ret = jail_get(jiov, 4, flags)) < 0) return (NULL); if ((jail = find_jail(jailname)) == NULL) { jail = add_jail(); jail->name = estrdup(jailname); jail->jid = ret; } return (jail); }