diff --git a/sys/dev/mwl/if_mwl.c b/sys/dev/mwl/if_mwl.c index 2bffff0bf8b8..95655aa33e2f 100644 --- a/sys/dev/mwl/if_mwl.c +++ b/sys/dev/mwl/if_mwl.c @@ -1,4827 +1,4826 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * Copyright (c) 2007-2008 Marvell Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. */ #include /* * Driver for the Marvell 88W8363 Wireless LAN controller. */ #include "opt_inet.h" #include "opt_mwl.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif /* INET */ #include #include static struct ieee80211vap *mwl_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void mwl_vap_delete(struct ieee80211vap *); static int mwl_setupdma(struct mwl_softc *); static int mwl_hal_reset(struct mwl_softc *sc); static int mwl_init(struct mwl_softc *); static void mwl_parent(struct ieee80211com *); static int mwl_reset(struct ieee80211vap *, u_long); static void mwl_stop(struct mwl_softc *); static void mwl_start(struct mwl_softc *); static int mwl_transmit(struct ieee80211com *, struct mbuf *); static int mwl_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static int mwl_media_change(if_t); static void mwl_watchdog(void *); static int mwl_ioctl(struct ieee80211com *, u_long, void *); static void mwl_radar_proc(void *, int); static void mwl_chanswitch_proc(void *, int); static void mwl_bawatchdog_proc(void *, int); static int mwl_key_alloc(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); static int mwl_key_delete(struct ieee80211vap *, const struct ieee80211_key *); static int mwl_key_set(struct ieee80211vap *, const struct ieee80211_key *); static int _mwl_key_set(struct ieee80211vap *, const struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); static int mwl_mode_init(struct mwl_softc *); static void mwl_update_mcast(struct ieee80211com *); static void mwl_update_promisc(struct ieee80211com *); static void mwl_updateslot(struct ieee80211com *); static int mwl_beacon_setup(struct ieee80211vap *); static void mwl_beacon_update(struct ieee80211vap *, int); #ifdef MWL_HOST_PS_SUPPORT static void mwl_update_ps(struct ieee80211vap *, int); static int mwl_set_tim(struct ieee80211_node *, int); #endif static int mwl_dma_setup(struct mwl_softc *); static void mwl_dma_cleanup(struct mwl_softc *); static struct ieee80211_node *mwl_node_alloc(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); static void mwl_node_cleanup(struct ieee80211_node *); static void mwl_node_drain(struct ieee80211_node *); static void mwl_node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *); static void mwl_node_getmimoinfo(const struct ieee80211_node *, struct ieee80211_mimo_info *); static int mwl_rxbuf_init(struct mwl_softc *, struct mwl_rxbuf *); static void mwl_rx_proc(void *, int); static void mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *, int); static int mwl_tx_setup(struct mwl_softc *, int, int); static int mwl_wme_update(struct ieee80211com *); static void mwl_tx_cleanupq(struct mwl_softc *, struct mwl_txq *); static void mwl_tx_cleanup(struct mwl_softc *); static uint16_t mwl_calcformat(uint8_t rate, const struct ieee80211_node *); static int mwl_tx_start(struct mwl_softc *, struct ieee80211_node *, struct mwl_txbuf *, struct mbuf *); static void mwl_tx_proc(void *, int); static int mwl_chan_set(struct mwl_softc *, struct ieee80211_channel *); static void mwl_draintxq(struct mwl_softc *); static void mwl_cleartxq(struct mwl_softc *, struct ieee80211vap *); static int mwl_recv_action(struct ieee80211_node *, const struct ieee80211_frame *, const uint8_t *, const uint8_t *); static int mwl_addba_request(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); static int mwl_addba_response(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); static void mwl_addba_stop(struct ieee80211_node *, struct ieee80211_tx_ampdu *); static int mwl_startrecv(struct mwl_softc *); static MWL_HAL_APMODE mwl_getapmode(const struct ieee80211vap *, struct ieee80211_channel *); static int mwl_setapmode(struct ieee80211vap *, struct ieee80211_channel*); static void mwl_scan_start(struct ieee80211com *); static void mwl_scan_end(struct ieee80211com *); static void mwl_set_channel(struct ieee80211com *); static int mwl_peerstadb(struct ieee80211_node *, int aid, int staid, MWL_HAL_PEERINFO *pi); static int mwl_localstadb(struct ieee80211vap *); static int mwl_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int allocstaid(struct mwl_softc *sc, int aid); static void delstaid(struct mwl_softc *sc, int staid); static void mwl_newassoc(struct ieee80211_node *, int); static void mwl_agestations(void *); static int mwl_setregdomain(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); static void mwl_getradiocaps(struct ieee80211com *, int, int *, struct ieee80211_channel []); static int mwl_getchannels(struct mwl_softc *); static void mwl_sysctlattach(struct mwl_softc *); static void mwl_announce(struct mwl_softc *); SYSCTL_NODE(_hw, OID_AUTO, mwl, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "Marvell driver parameters"); static int mwl_rxdesc = MWL_RXDESC; /* # rx desc's to allocate */ SYSCTL_INT(_hw_mwl, OID_AUTO, rxdesc, CTLFLAG_RW, &mwl_rxdesc, 0, "rx descriptors allocated"); static int mwl_rxbuf = MWL_RXBUF; /* # rx buffers to allocate */ SYSCTL_INT(_hw_mwl, OID_AUTO, rxbuf, CTLFLAG_RWTUN, &mwl_rxbuf, 0, "rx buffers allocated"); static int mwl_txbuf = MWL_TXBUF; /* # tx buffers to allocate */ SYSCTL_INT(_hw_mwl, OID_AUTO, txbuf, CTLFLAG_RWTUN, &mwl_txbuf, 0, "tx buffers allocated"); static int mwl_txcoalesce = 8; /* # tx packets to q before poking f/w*/ SYSCTL_INT(_hw_mwl, OID_AUTO, txcoalesce, CTLFLAG_RWTUN, &mwl_txcoalesce, 0, "tx buffers to send at once"); static int mwl_rxquota = MWL_RXBUF; /* # max buffers to process */ SYSCTL_INT(_hw_mwl, OID_AUTO, rxquota, CTLFLAG_RWTUN, &mwl_rxquota, 0, "max rx buffers to process per interrupt"); static int mwl_rxdmalow = 3; /* # min buffers for wakeup */ SYSCTL_INT(_hw_mwl, OID_AUTO, rxdmalow, CTLFLAG_RWTUN, &mwl_rxdmalow, 0, "min free rx buffers before restarting traffic"); #ifdef MWL_DEBUG static int mwl_debug = 0; SYSCTL_INT(_hw_mwl, OID_AUTO, debug, CTLFLAG_RWTUN, &mwl_debug, 0, "control debugging printfs"); enum { MWL_DEBUG_XMIT = 0x00000001, /* basic xmit operation */ MWL_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */ MWL_DEBUG_RECV = 0x00000004, /* basic recv operation */ MWL_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */ MWL_DEBUG_RESET = 0x00000010, /* reset processing */ MWL_DEBUG_BEACON = 0x00000020, /* beacon handling */ MWL_DEBUG_INTR = 0x00000040, /* ISR */ MWL_DEBUG_TX_PROC = 0x00000080, /* tx ISR proc */ MWL_DEBUG_RX_PROC = 0x00000100, /* rx ISR proc */ MWL_DEBUG_KEYCACHE = 0x00000200, /* key cache management */ MWL_DEBUG_STATE = 0x00000400, /* 802.11 state transitions */ MWL_DEBUG_NODE = 0x00000800, /* node management */ MWL_DEBUG_RECV_ALL = 0x00001000, /* trace all frames (beacons) */ MWL_DEBUG_TSO = 0x00002000, /* TSO processing */ MWL_DEBUG_AMPDU = 0x00004000, /* BA stream handling */ MWL_DEBUG_ANY = 0xffffffff }; #define IS_BEACON(wh) \ ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) == \ (IEEE80211_FC0_TYPE_MGT|IEEE80211_FC0_SUBTYPE_BEACON)) #define IFF_DUMPPKTS_RECV(sc, wh) \ ((sc->sc_debug & MWL_DEBUG_RECV) && \ ((sc->sc_debug & MWL_DEBUG_RECV_ALL) || !IS_BEACON(wh))) #define IFF_DUMPPKTS_XMIT(sc) \ (sc->sc_debug & MWL_DEBUG_XMIT) #define DPRINTF(sc, m, fmt, ...) do { \ if (sc->sc_debug & (m)) \ printf(fmt, __VA_ARGS__); \ } while (0) #define KEYPRINTF(sc, hk, mac) do { \ if (sc->sc_debug & MWL_DEBUG_KEYCACHE) \ mwl_keyprint(sc, __func__, hk, mac); \ } while (0) static void mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix); static void mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix); #else #define IFF_DUMPPKTS_RECV(sc, wh) 0 #define IFF_DUMPPKTS_XMIT(sc) 0 #define DPRINTF(sc, m, fmt, ...) do { (void )sc; } while (0) #define KEYPRINTF(sc, k, mac) do { (void )sc; } while (0) #endif static MALLOC_DEFINE(M_MWLDEV, "mwldev", "mwl driver dma buffers"); /* * Each packet has fixed front matter: a 2-byte length * of the payload, followed by a 4-address 802.11 header * (regardless of the actual header and always w/o any * QoS header). The payload then follows. */ struct mwltxrec { uint16_t fwlen; struct ieee80211_frame_addr4 wh; } __packed; /* * Read/Write shorthands for accesses to BAR 0. Note * that all BAR 1 operations are done in the "hal" and * there should be no reference to them here. */ #ifdef MWL_DEBUG static __inline uint32_t RD4(struct mwl_softc *sc, bus_size_t off) { return bus_space_read_4(sc->sc_io0t, sc->sc_io0h, off); } #endif static __inline void WR4(struct mwl_softc *sc, bus_size_t off, uint32_t val) { bus_space_write_4(sc->sc_io0t, sc->sc_io0h, off, val); } int mwl_attach(uint16_t devid, struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct mwl_hal *mh; int error = 0; DPRINTF(sc, MWL_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid); /* * Setup the RX free list lock early, so it can be consistently * removed. */ MWL_RXFREE_INIT(sc); mh = mwl_hal_attach(sc->sc_dev, devid, sc->sc_io1h, sc->sc_io1t, sc->sc_dmat); if (mh == NULL) { device_printf(sc->sc_dev, "unable to attach HAL\n"); error = EIO; goto bad; } sc->sc_mh = mh; /* * Load firmware so we can get setup. We arbitrarily * pick station firmware; we'll re-load firmware as * needed so setting up the wrong mode isn't a big deal. */ if (mwl_hal_fwload(mh, NULL) != 0) { device_printf(sc->sc_dev, "unable to setup builtin firmware\n"); error = EIO; goto bad1; } if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) { device_printf(sc->sc_dev, "unable to fetch h/w specs\n"); error = EIO; goto bad1; } error = mwl_getchannels(sc); if (error != 0) goto bad1; sc->sc_txantenna = 0; /* h/w default */ sc->sc_rxantenna = 0; /* h/w default */ sc->sc_invalid = 0; /* ready to go, enable int handling */ sc->sc_ageinterval = MWL_AGEINTERVAL; /* * Allocate tx+rx descriptors and populate the lists. * We immediately push the information to the firmware * as otherwise it gets upset. */ error = mwl_dma_setup(sc); if (error != 0) { device_printf(sc->sc_dev, "failed to setup descriptors: %d\n", error); goto bad1; } error = mwl_setupdma(sc); /* push to firmware */ if (error != 0) /* NB: mwl_setupdma prints msg */ goto bad1; callout_init(&sc->sc_timer, 1); callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0); mbufq_init(&sc->sc_snd, ifqmaxlen); sc->sc_tq = taskqueue_create("mwl_taskq", M_NOWAIT, taskqueue_thread_enqueue, &sc->sc_tq); taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, "%s taskq", device_get_nameunit(sc->sc_dev)); NET_TASK_INIT(&sc->sc_rxtask, 0, mwl_rx_proc, sc); TASK_INIT(&sc->sc_radartask, 0, mwl_radar_proc, sc); TASK_INIT(&sc->sc_chanswitchtask, 0, mwl_chanswitch_proc, sc); TASK_INIT(&sc->sc_bawatchdogtask, 0, mwl_bawatchdog_proc, sc); /* NB: insure BK queue is the lowest priority h/w queue */ if (!mwl_tx_setup(sc, WME_AC_BK, MWL_WME_AC_BK)) { device_printf(sc->sc_dev, "unable to setup xmit queue for %s traffic!\n", ieee80211_wme_acnames[WME_AC_BK]); error = EIO; goto bad2; } if (!mwl_tx_setup(sc, WME_AC_BE, MWL_WME_AC_BE) || !mwl_tx_setup(sc, WME_AC_VI, MWL_WME_AC_VI) || !mwl_tx_setup(sc, WME_AC_VO, MWL_WME_AC_VO)) { /* * Not enough hardware tx queues to properly do WME; * just punt and assign them all to the same h/w queue. * We could do a better job of this if, for example, * we allocate queues when we switch from station to * AP mode. */ if (sc->sc_ac2q[WME_AC_VI] != NULL) mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]); if (sc->sc_ac2q[WME_AC_BE] != NULL) mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]); sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK]; sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK]; sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK]; } TASK_INIT(&sc->sc_txtask, 0, mwl_tx_proc, sc); ic->ic_softc = sc; ic->ic_name = device_get_nameunit(sc->sc_dev); /* XXX not right but it's not used anywhere important */ ic->ic_phytype = IEEE80211_T_OFDM; ic->ic_opmode = IEEE80211_M_STA; ic->ic_caps = IEEE80211_C_STA /* station mode supported */ | IEEE80211_C_HOSTAP /* hostap mode */ | IEEE80211_C_MONITOR /* monitor mode */ #if 0 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ | IEEE80211_C_AHDEMO /* adhoc demo mode */ #endif | IEEE80211_C_MBSS /* mesh point link mode */ | IEEE80211_C_WDS /* WDS supported */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_SHSLOT /* short slot time supported */ | IEEE80211_C_WME /* WME/WMM supported */ | IEEE80211_C_BURST /* xmit bursting supported */ | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ | IEEE80211_C_BGSCAN /* capable of bg scanning */ | IEEE80211_C_TXFRAG /* handle tx frags */ | IEEE80211_C_TXPMGT /* capable of txpow mgt */ | IEEE80211_C_DFS /* DFS supported */ ; ic->ic_htcaps = IEEE80211_HTCAP_SMPS_ENA /* SM PS mode enabled */ | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width */ | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */ | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */ | IEEE80211_HTCAP_RXSTBC_2STREAM/* 1-2 spatial streams */ #if MWL_AGGR_SIZE == 7935 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */ #else | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */ #endif #if 0 | IEEE80211_HTCAP_PSMP /* PSMP supported */ | IEEE80211_HTCAP_40INTOLERANT /* 40MHz intolerant */ #endif /* s/w capabilities */ | IEEE80211_HTC_HT /* HT operation */ | IEEE80211_HTC_AMPDU /* tx A-MPDU */ | IEEE80211_HTC_AMSDU /* tx A-MSDU */ | IEEE80211_HTC_SMPS /* SMPS available */ ; /* * Mark h/w crypto support. * XXX no way to query h/w support. */ ic->ic_cryptocaps |= IEEE80211_CRYPTO_WEP | IEEE80211_CRYPTO_AES_CCM | IEEE80211_CRYPTO_TKIP | IEEE80211_CRYPTO_TKIPMIC ; /* * Transmit requires space in the packet for a special * format transmit record and optional padding between * this record and the payload. Ask the net80211 layer * to arrange this when encapsulating packets so we can * add it efficiently. */ ic->ic_headroom = sizeof(struct mwltxrec) - sizeof(struct ieee80211_frame); IEEE80211_ADDR_COPY(ic->ic_macaddr, sc->sc_hwspecs.macAddr); /* call MI attach routine. */ ieee80211_ifattach(ic); ic->ic_setregdomain = mwl_setregdomain; ic->ic_getradiocaps = mwl_getradiocaps; /* override default methods */ ic->ic_raw_xmit = mwl_raw_xmit; ic->ic_newassoc = mwl_newassoc; ic->ic_updateslot = mwl_updateslot; ic->ic_update_mcast = mwl_update_mcast; ic->ic_update_promisc = mwl_update_promisc; ic->ic_wme.wme_update = mwl_wme_update; ic->ic_transmit = mwl_transmit; ic->ic_ioctl = mwl_ioctl; ic->ic_parent = mwl_parent; ic->ic_node_alloc = mwl_node_alloc; sc->sc_node_cleanup = ic->ic_node_cleanup; ic->ic_node_cleanup = mwl_node_cleanup; sc->sc_node_drain = ic->ic_node_drain; ic->ic_node_drain = mwl_node_drain; ic->ic_node_getsignal = mwl_node_getsignal; ic->ic_node_getmimoinfo = mwl_node_getmimoinfo; ic->ic_scan_start = mwl_scan_start; ic->ic_scan_end = mwl_scan_end; ic->ic_set_channel = mwl_set_channel; sc->sc_recv_action = ic->ic_recv_action; ic->ic_recv_action = mwl_recv_action; sc->sc_addba_request = ic->ic_addba_request; ic->ic_addba_request = mwl_addba_request; sc->sc_addba_response = ic->ic_addba_response; ic->ic_addba_response = mwl_addba_response; sc->sc_addba_stop = ic->ic_addba_stop; ic->ic_addba_stop = mwl_addba_stop; ic->ic_vap_create = mwl_vap_create; ic->ic_vap_delete = mwl_vap_delete; ieee80211_radiotap_attach(ic, &sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th), MWL_TX_RADIOTAP_PRESENT, &sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th), MWL_RX_RADIOTAP_PRESENT); /* * Setup dynamic sysctl's now that country code and * regdomain are available from the hal. */ mwl_sysctlattach(sc); if (bootverbose) ieee80211_announce(ic); mwl_announce(sc); return 0; bad2: mwl_dma_cleanup(sc); bad1: mwl_hal_detach(mh); bad: MWL_RXFREE_DESTROY(sc); sc->sc_invalid = 1; return error; } int mwl_detach(struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; MWL_LOCK(sc); mwl_stop(sc); MWL_UNLOCK(sc); /* * NB: the order of these is important: * o call the 802.11 layer before detaching the hal to * insure callbacks into the driver to delete global * key cache entries can be handled * o reclaim the tx queue data structures after calling * the 802.11 layer as we'll get called back to reclaim * node state and potentially want to use them * o to cleanup the tx queues the hal is called, so detach * it last * Other than that, it's straightforward... */ ieee80211_ifdetach(ic); callout_drain(&sc->sc_watchdog); mwl_dma_cleanup(sc); MWL_RXFREE_DESTROY(sc); mwl_tx_cleanup(sc); mwl_hal_detach(sc->sc_mh); mbufq_drain(&sc->sc_snd); return 0; } /* * MAC address handling for multiple BSS on the same radio. * The first vap uses the MAC address from the EEPROM. For * subsequent vap's we set the U/L bit (bit 1) in the MAC * address and use the next six bits as an index. */ static void assign_address(struct mwl_softc *sc, uint8_t mac[IEEE80211_ADDR_LEN], int clone) { int i; if (clone && mwl_hal_ismbsscapable(sc->sc_mh)) { /* NB: we only do this if h/w supports multiple bssid */ for (i = 0; i < 32; i++) if ((sc->sc_bssidmask & (1<sc_bssidmask |= 1<sc_nbssid0++; } static void reclaim_address(struct mwl_softc *sc, const uint8_t mac[IEEE80211_ADDR_LEN]) { int i = mac[0] >> 2; if (i != 0 || --sc->sc_nbssid0 == 0) sc->sc_bssidmask &= ~(1<ic_softc; struct mwl_hal *mh = sc->sc_mh; struct ieee80211vap *vap, *apvap; struct mwl_hal_vap *hvap; struct mwl_vap *mvp; uint8_t mac[IEEE80211_ADDR_LEN]; IEEE80211_ADDR_COPY(mac, mac0); switch (opmode) { case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: if ((flags & IEEE80211_CLONE_MACADDR) == 0) assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID); hvap = mwl_hal_newvap(mh, MWL_HAL_AP, mac); if (hvap == NULL) { if ((flags & IEEE80211_CLONE_MACADDR) == 0) reclaim_address(sc, mac); return NULL; } break; case IEEE80211_M_STA: if ((flags & IEEE80211_CLONE_MACADDR) == 0) assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID); hvap = mwl_hal_newvap(mh, MWL_HAL_STA, mac); if (hvap == NULL) { if ((flags & IEEE80211_CLONE_MACADDR) == 0) reclaim_address(sc, mac); return NULL; } /* no h/w beacon miss support; always use s/w */ flags |= IEEE80211_CLONE_NOBEACONS; break; case IEEE80211_M_WDS: hvap = NULL; /* NB: we use associated AP vap */ if (sc->sc_napvaps == 0) return NULL; /* no existing AP vap */ break; case IEEE80211_M_MONITOR: hvap = NULL; break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: default: return NULL; } mvp = malloc(sizeof(struct mwl_vap), M_80211_VAP, M_WAITOK | M_ZERO); mvp->mv_hvap = hvap; if (opmode == IEEE80211_M_WDS) { /* * WDS vaps must have an associated AP vap; find one. * XXX not right. */ TAILQ_FOREACH(apvap, &ic->ic_vaps, iv_next) if (apvap->iv_opmode == IEEE80211_M_HOSTAP) { mvp->mv_ap_hvap = MWL_VAP(apvap)->mv_hvap; break; } KASSERT(mvp->mv_ap_hvap != NULL, ("no ap vap")); } vap = &mvp->mv_vap; ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); /* override with driver methods */ mvp->mv_newstate = vap->iv_newstate; vap->iv_newstate = mwl_newstate; vap->iv_max_keyix = 0; /* XXX */ vap->iv_key_alloc = mwl_key_alloc; vap->iv_key_delete = mwl_key_delete; vap->iv_key_set = mwl_key_set; #ifdef MWL_HOST_PS_SUPPORT if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) { vap->iv_update_ps = mwl_update_ps; mvp->mv_set_tim = vap->iv_set_tim; vap->iv_set_tim = mwl_set_tim; } #endif vap->iv_reset = mwl_reset; vap->iv_update_beacon = mwl_beacon_update; /* override max aid so sta's cannot assoc when we're out of sta id's */ vap->iv_max_aid = MWL_MAXSTAID; /* override default A-MPDU rx parameters */ vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_64K; vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_4; /* complete setup */ ieee80211_vap_attach(vap, mwl_media_change, ieee80211_media_status, mac); switch (vap->iv_opmode) { case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: case IEEE80211_M_STA: /* * Setup sta db entry for local address. */ mwl_localstadb(vap); if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) sc->sc_napvaps++; else sc->sc_nstavaps++; break; case IEEE80211_M_WDS: sc->sc_nwdsvaps++; break; default: break; } /* * Setup overall operating mode. */ if (sc->sc_napvaps) ic->ic_opmode = IEEE80211_M_HOSTAP; else if (sc->sc_nstavaps) ic->ic_opmode = IEEE80211_M_STA; else ic->ic_opmode = opmode; return vap; } static void mwl_vap_delete(struct ieee80211vap *vap) { struct mwl_vap *mvp = MWL_VAP(vap); struct mwl_softc *sc = vap->iv_ic->ic_softc; struct mwl_hal *mh = sc->sc_mh; struct mwl_hal_vap *hvap = mvp->mv_hvap; enum ieee80211_opmode opmode = vap->iv_opmode; /* XXX disallow ap vap delete if WDS still present */ if (sc->sc_running) { /* quiesce h/w while we remove the vap */ mwl_hal_intrset(mh, 0); /* disable interrupts */ } ieee80211_vap_detach(vap); switch (opmode) { case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: case IEEE80211_M_STA: KASSERT(hvap != NULL, ("no hal vap handle")); (void) mwl_hal_delstation(hvap, vap->iv_myaddr); mwl_hal_delvap(hvap); if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) sc->sc_napvaps--; else sc->sc_nstavaps--; /* XXX don't do it for IEEE80211_CLONE_MACADDR */ reclaim_address(sc, vap->iv_myaddr); break; case IEEE80211_M_WDS: sc->sc_nwdsvaps--; break; default: break; } mwl_cleartxq(sc, vap); free(mvp, M_80211_VAP); if (sc->sc_running) mwl_hal_intrset(mh, sc->sc_imask); } void mwl_suspend(struct mwl_softc *sc) { MWL_LOCK(sc); mwl_stop(sc); MWL_UNLOCK(sc); } void mwl_resume(struct mwl_softc *sc) { int error = EDOOFUS; MWL_LOCK(sc); if (sc->sc_ic.ic_nrunning > 0) error = mwl_init(sc); MWL_UNLOCK(sc); if (error == 0) ieee80211_start_all(&sc->sc_ic); /* start all vap's */ } void mwl_shutdown(void *arg) { struct mwl_softc *sc = arg; MWL_LOCK(sc); mwl_stop(sc); MWL_UNLOCK(sc); } /* * Interrupt handler. Most of the actual processing is deferred. */ void mwl_intr(void *arg) { struct mwl_softc *sc = arg; struct mwl_hal *mh = sc->sc_mh; uint32_t status; if (sc->sc_invalid) { /* * The hardware is not ready/present, don't touch anything. * Note this can happen early on if the IRQ is shared. */ DPRINTF(sc, MWL_DEBUG_ANY, "%s: invalid; ignored\n", __func__); return; } /* * Figure out the reason(s) for the interrupt. */ mwl_hal_getisr(mh, &status); /* NB: clears ISR too */ if (status == 0) /* must be a shared irq */ return; DPRINTF(sc, MWL_DEBUG_INTR, "%s: status 0x%x imask 0x%x\n", __func__, status, sc->sc_imask); if (status & MACREG_A2HRIC_BIT_RX_RDY) taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask); if (status & MACREG_A2HRIC_BIT_TX_DONE) taskqueue_enqueue(sc->sc_tq, &sc->sc_txtask); if (status & MACREG_A2HRIC_BIT_BA_WATCHDOG) taskqueue_enqueue(sc->sc_tq, &sc->sc_bawatchdogtask); if (status & MACREG_A2HRIC_BIT_OPC_DONE) mwl_hal_cmddone(mh); if (status & MACREG_A2HRIC_BIT_MAC_EVENT) { ; } if (status & MACREG_A2HRIC_BIT_ICV_ERROR) { /* TKIP ICV error */ sc->sc_stats.mst_rx_badtkipicv++; } if (status & MACREG_A2HRIC_BIT_QUEUE_EMPTY) { /* 11n aggregation queue is empty, re-fill */ ; } if (status & MACREG_A2HRIC_BIT_QUEUE_FULL) { ; } if (status & MACREG_A2HRIC_BIT_RADAR_DETECT) { /* radar detected, process event */ taskqueue_enqueue(sc->sc_tq, &sc->sc_radartask); } if (status & MACREG_A2HRIC_BIT_CHAN_SWITCH) { /* DFS channel switch */ taskqueue_enqueue(sc->sc_tq, &sc->sc_chanswitchtask); } } static void mwl_radar_proc(void *arg, int pending) { struct mwl_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; DPRINTF(sc, MWL_DEBUG_ANY, "%s: radar detected, pending %u\n", __func__, pending); sc->sc_stats.mst_radardetect++; /* XXX stop h/w BA streams? */ IEEE80211_LOCK(ic); ieee80211_dfs_notify_radar(ic, ic->ic_curchan); IEEE80211_UNLOCK(ic); } static void mwl_chanswitch_proc(void *arg, int pending) { struct mwl_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; DPRINTF(sc, MWL_DEBUG_ANY, "%s: channel switch notice, pending %u\n", __func__, pending); IEEE80211_LOCK(ic); sc->sc_csapending = 0; ieee80211_csa_completeswitch(ic); IEEE80211_UNLOCK(ic); } static void mwl_bawatchdog(const MWL_HAL_BASTREAM *sp) { struct ieee80211_node *ni = sp->data[0]; /* send DELBA and drop the stream */ ieee80211_ampdu_stop(ni, sp->data[1], IEEE80211_REASON_UNSPECIFIED); } static void mwl_bawatchdog_proc(void *arg, int pending) { struct mwl_softc *sc = arg; struct mwl_hal *mh = sc->sc_mh; const MWL_HAL_BASTREAM *sp; uint8_t bitmap, n; sc->sc_stats.mst_bawatchdog++; if (mwl_hal_getwatchdogbitmap(mh, &bitmap) != 0) { DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: could not get bitmap\n", __func__); sc->sc_stats.mst_bawatchdog_failed++; return; } DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: bitmap 0x%x\n", __func__, bitmap); if (bitmap == 0xff) { n = 0; /* disable all ba streams */ for (bitmap = 0; bitmap < 8; bitmap++) { sp = mwl_hal_bastream_lookup(mh, bitmap); if (sp != NULL) { mwl_bawatchdog(sp); n++; } } if (n == 0) { DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: no BA streams found\n", __func__); sc->sc_stats.mst_bawatchdog_empty++; } } else if (bitmap != 0xaa) { /* disable a single ba stream */ sp = mwl_hal_bastream_lookup(mh, bitmap); if (sp != NULL) { mwl_bawatchdog(sp); } else { DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: no BA stream %d\n", __func__, bitmap); sc->sc_stats.mst_bawatchdog_notfound++; } } } /* * Convert net80211 channel to a HAL channel. */ static void mwl_mapchan(MWL_HAL_CHANNEL *hc, const struct ieee80211_channel *chan) { hc->channel = chan->ic_ieee; *(uint32_t *)&hc->channelFlags = 0; if (IEEE80211_IS_CHAN_2GHZ(chan)) hc->channelFlags.FreqBand = MWL_FREQ_BAND_2DOT4GHZ; else if (IEEE80211_IS_CHAN_5GHZ(chan)) hc->channelFlags.FreqBand = MWL_FREQ_BAND_5GHZ; if (IEEE80211_IS_CHAN_HT40(chan)) { hc->channelFlags.ChnlWidth = MWL_CH_40_MHz_WIDTH; if (IEEE80211_IS_CHAN_HT40U(chan)) hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_ABOVE_CTRL_CH; else hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_BELOW_CTRL_CH; } else hc->channelFlags.ChnlWidth = MWL_CH_20_MHz_WIDTH; /* XXX 10MHz channels */ } /* * Inform firmware of our tx/rx dma setup. The BAR 0 * writes below are for compatibility with older firmware. * For current firmware we send this information with a * cmd block via mwl_hal_sethwdma. */ static int mwl_setupdma(struct mwl_softc *sc) { int error, i; sc->sc_hwdma.rxDescRead = sc->sc_rxdma.dd_desc_paddr; WR4(sc, sc->sc_hwspecs.rxDescRead, sc->sc_hwdma.rxDescRead); WR4(sc, sc->sc_hwspecs.rxDescWrite, sc->sc_hwdma.rxDescRead); for (i = 0; i < MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES; i++) { struct mwl_txq *txq = &sc->sc_txq[i]; sc->sc_hwdma.wcbBase[i] = txq->dma.dd_desc_paddr; WR4(sc, sc->sc_hwspecs.wcbBase[i], sc->sc_hwdma.wcbBase[i]); } sc->sc_hwdma.maxNumTxWcb = mwl_txbuf; sc->sc_hwdma.maxNumWCB = MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES; error = mwl_hal_sethwdma(sc->sc_mh, &sc->sc_hwdma); if (error != 0) { device_printf(sc->sc_dev, "unable to setup tx/rx dma; hal status %u\n", error); /* XXX */ } return error; } /* * Inform firmware of tx rate parameters. * Called after a channel change. */ static int mwl_setcurchanrates(struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; const struct ieee80211_rateset *rs; MWL_HAL_TXRATE rates; memset(&rates, 0, sizeof(rates)); rs = ieee80211_get_suprates(ic, ic->ic_curchan); /* rate used to send management frames */ rates.MgtRate = rs->rs_rates[0] & IEEE80211_RATE_VAL; /* rate used to send multicast frames */ rates.McastRate = rates.MgtRate; return mwl_hal_settxrate_auto(sc->sc_mh, &rates); } /* * Inform firmware of tx rate parameters. Called whenever * user-settable params change and after a channel change. */ static int mwl_setrates(struct ieee80211vap *vap) { struct mwl_vap *mvp = MWL_VAP(vap); struct ieee80211_node *ni = vap->iv_bss; const struct ieee80211_txparam *tp = ni->ni_txparms; MWL_HAL_TXRATE rates; KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state)); /* * Update the h/w rate map. * NB: 0x80 for MCS is passed through unchanged */ memset(&rates, 0, sizeof(rates)); /* rate used to send management frames */ rates.MgtRate = tp->mgmtrate; /* rate used to send multicast frames */ rates.McastRate = tp->mcastrate; /* while here calculate EAPOL fixed rate cookie */ mvp->mv_eapolformat = htole16(mwl_calcformat(rates.MgtRate, ni)); return mwl_hal_settxrate(mvp->mv_hvap, tp->ucastrate != IEEE80211_FIXED_RATE_NONE ? RATE_FIXED : RATE_AUTO, &rates); } /* * Setup a fixed xmit rate cookie for EAPOL frames. */ static void mwl_seteapolformat(struct ieee80211vap *vap) { struct mwl_vap *mvp = MWL_VAP(vap); struct ieee80211_node *ni = vap->iv_bss; enum ieee80211_phymode mode; uint8_t rate; KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state)); mode = ieee80211_chan2mode(ni->ni_chan); /* * Use legacy rates when operating a mixed HT+non-HT bss. * NB: this may violate POLA for sta and wds vap's. */ if (mode == IEEE80211_MODE_11NA && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) rate = vap->iv_txparms[IEEE80211_MODE_11A].mgmtrate; else if (mode == IEEE80211_MODE_11NG && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) rate = vap->iv_txparms[IEEE80211_MODE_11G].mgmtrate; else rate = vap->iv_txparms[mode].mgmtrate; mvp->mv_eapolformat = htole16(mwl_calcformat(rate, ni)); } /* * Map SKU+country code to region code for radar bin'ing. */ static int mwl_map2regioncode(const struct ieee80211_regdomain *rd) { switch (rd->regdomain) { case SKU_FCC: case SKU_FCC3: return DOMAIN_CODE_FCC; case SKU_CA: return DOMAIN_CODE_IC; case SKU_ETSI: case SKU_ETSI2: case SKU_ETSI3: if (rd->country == CTRY_SPAIN) return DOMAIN_CODE_SPAIN; if (rd->country == CTRY_FRANCE || rd->country == CTRY_FRANCE2) return DOMAIN_CODE_FRANCE; /* XXX force 1.3.1 radar type */ return DOMAIN_CODE_ETSI_131; case SKU_JAPAN: return DOMAIN_CODE_MKK; case SKU_ROW: return DOMAIN_CODE_DGT; /* Taiwan */ case SKU_APAC: case SKU_APAC2: case SKU_APAC3: return DOMAIN_CODE_AUS; /* Australia */ } /* XXX KOREA? */ return DOMAIN_CODE_FCC; /* XXX? */ } static int mwl_hal_reset(struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct mwl_hal *mh = sc->sc_mh; mwl_hal_setantenna(mh, WL_ANTENNATYPE_RX, sc->sc_rxantenna); mwl_hal_setantenna(mh, WL_ANTENNATYPE_TX, sc->sc_txantenna); mwl_hal_setradio(mh, 1, WL_AUTO_PREAMBLE); mwl_hal_setwmm(sc->sc_mh, (ic->ic_flags & IEEE80211_F_WME) != 0); mwl_chan_set(sc, ic->ic_curchan); /* NB: RF/RA performance tuned for indoor mode */ mwl_hal_setrateadaptmode(mh, 0); mwl_hal_setoptimizationlevel(mh, (ic->ic_flags & IEEE80211_F_BURST) != 0); mwl_hal_setregioncode(mh, mwl_map2regioncode(&ic->ic_regdomain)); mwl_hal_setaggampduratemode(mh, 1, 80); /* XXX */ mwl_hal_setcfend(mh, 0); /* XXX */ return 1; } static int mwl_init(struct mwl_softc *sc) { struct mwl_hal *mh = sc->sc_mh; int error = 0; MWL_LOCK_ASSERT(sc); /* * Stop anything previously setup. This is safe * whether this is the first time through or not. */ mwl_stop(sc); /* * Push vap-independent state to the firmware. */ if (!mwl_hal_reset(sc)) { device_printf(sc->sc_dev, "unable to reset hardware\n"); return EIO; } /* * Setup recv (once); transmit is already good to go. */ error = mwl_startrecv(sc); if (error != 0) { device_printf(sc->sc_dev, "unable to start recv logic\n"); return error; } /* * Enable interrupts. */ sc->sc_imask = MACREG_A2HRIC_BIT_RX_RDY | MACREG_A2HRIC_BIT_TX_DONE | MACREG_A2HRIC_BIT_OPC_DONE #if 0 | MACREG_A2HRIC_BIT_MAC_EVENT #endif | MACREG_A2HRIC_BIT_ICV_ERROR | MACREG_A2HRIC_BIT_RADAR_DETECT | MACREG_A2HRIC_BIT_CHAN_SWITCH #if 0 | MACREG_A2HRIC_BIT_QUEUE_EMPTY #endif | MACREG_A2HRIC_BIT_BA_WATCHDOG | MACREQ_A2HRIC_BIT_TX_ACK ; sc->sc_running = 1; mwl_hal_intrset(mh, sc->sc_imask); callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc); return 0; } static void mwl_stop(struct mwl_softc *sc) { MWL_LOCK_ASSERT(sc); if (sc->sc_running) { /* * Shutdown the hardware and driver. */ sc->sc_running = 0; callout_stop(&sc->sc_watchdog); sc->sc_tx_timer = 0; mwl_draintxq(sc); } } static int mwl_reset_vap(struct ieee80211vap *vap, int state) { struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; struct ieee80211com *ic = vap->iv_ic; if (state == IEEE80211_S_RUN) mwl_setrates(vap); /* XXX off by 1? */ mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold); /* XXX auto? 20/40 split? */ mwl_hal_sethtgi(hvap, (vap->iv_flags_ht & (IEEE80211_FHT_SHORTGI20|IEEE80211_FHT_SHORTGI40)) ? 1 : 0); mwl_hal_setnprot(hvap, ic->ic_htprotmode == IEEE80211_PROT_NONE ? HTPROTECT_NONE : HTPROTECT_AUTO); /* XXX txpower cap */ /* re-setup beacons */ if (state == IEEE80211_S_RUN && (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS || vap->iv_opmode == IEEE80211_M_IBSS)) { mwl_setapmode(vap, vap->iv_bss->ni_chan); mwl_hal_setnprotmode(hvap, _IEEE80211_MASKSHIFT( ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE)); return mwl_beacon_setup(vap); } return 0; } /* * Reset the hardware w/o losing operational state. * Used to reset or reload hardware state for a vap. */ static int mwl_reset(struct ieee80211vap *vap, u_long cmd) { struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; int error = 0; if (hvap != NULL) { /* WDS, MONITOR, etc. */ struct ieee80211com *ic = vap->iv_ic; struct mwl_softc *sc = ic->ic_softc; struct mwl_hal *mh = sc->sc_mh; /* XXX handle DWDS sta vap change */ /* XXX do we need to disable interrupts? */ mwl_hal_intrset(mh, 0); /* disable interrupts */ error = mwl_reset_vap(vap, vap->iv_state); mwl_hal_intrset(mh, sc->sc_imask); } return error; } /* * Allocate a tx buffer for sending a frame. The * packet is assumed to have the WME AC stored so * we can use it to select the appropriate h/w queue. */ static struct mwl_txbuf * mwl_gettxbuf(struct mwl_softc *sc, struct mwl_txq *txq) { struct mwl_txbuf *bf; /* * Grab a TX buffer and associated resources. */ MWL_TXQ_LOCK(txq); bf = STAILQ_FIRST(&txq->free); if (bf != NULL) { STAILQ_REMOVE_HEAD(&txq->free, bf_list); txq->nfree--; } MWL_TXQ_UNLOCK(txq); if (bf == NULL) DPRINTF(sc, MWL_DEBUG_XMIT, "%s: out of xmit buffers on q %d\n", __func__, txq->qnum); return bf; } /* * Return a tx buffer to the queue it came from. Note there * are two cases because we must preserve the order of buffers * as it reflects the fixed order of descriptors in memory * (the firmware pre-fetches descriptors so we cannot reorder). */ static void mwl_puttxbuf_head(struct mwl_txq *txq, struct mwl_txbuf *bf) { bf->bf_m = NULL; bf->bf_node = NULL; MWL_TXQ_LOCK(txq); STAILQ_INSERT_HEAD(&txq->free, bf, bf_list); txq->nfree++; MWL_TXQ_UNLOCK(txq); } static void mwl_puttxbuf_tail(struct mwl_txq *txq, struct mwl_txbuf *bf) { bf->bf_m = NULL; bf->bf_node = NULL; MWL_TXQ_LOCK(txq); STAILQ_INSERT_TAIL(&txq->free, bf, bf_list); txq->nfree++; MWL_TXQ_UNLOCK(txq); } static int mwl_transmit(struct ieee80211com *ic, struct mbuf *m) { struct mwl_softc *sc = ic->ic_softc; int error; MWL_LOCK(sc); if (!sc->sc_running) { MWL_UNLOCK(sc); return (ENXIO); } error = mbufq_enqueue(&sc->sc_snd, m); if (error) { MWL_UNLOCK(sc); return (error); } mwl_start(sc); MWL_UNLOCK(sc); return (0); } static void mwl_start(struct mwl_softc *sc) { struct ieee80211_node *ni; struct mwl_txbuf *bf; struct mbuf *m; struct mwl_txq *txq = NULL; /* XXX silence gcc */ int nqueued; MWL_LOCK_ASSERT(sc); if (!sc->sc_running || sc->sc_invalid) return; nqueued = 0; while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { /* * Grab the node for the destination. */ ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; KASSERT(ni != NULL, ("no node")); m->m_pkthdr.rcvif = NULL; /* committed, clear ref */ /* * Grab a TX buffer and associated resources. * We honor the classification by the 802.11 layer. */ txq = sc->sc_ac2q[M_WME_GETAC(m)]; bf = mwl_gettxbuf(sc, txq); if (bf == NULL) { m_freem(m); ieee80211_free_node(ni); #ifdef MWL_TX_NODROP sc->sc_stats.mst_tx_qstop++; break; #else DPRINTF(sc, MWL_DEBUG_XMIT, "%s: tail drop on q %d\n", __func__, txq->qnum); sc->sc_stats.mst_tx_qdrop++; continue; #endif /* MWL_TX_NODROP */ } /* * Pass the frame to the h/w for transmission. */ if (mwl_tx_start(sc, ni, bf, m)) { if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); mwl_puttxbuf_head(txq, bf); ieee80211_free_node(ni); continue; } nqueued++; if (nqueued >= mwl_txcoalesce) { /* * Poke the firmware to process queued frames; * see below about (lack of) locking. */ nqueued = 0; mwl_hal_txstart(sc->sc_mh, 0/*XXX*/); } } if (nqueued) { /* * NB: We don't need to lock against tx done because * this just prods the firmware to check the transmit * descriptors. The firmware will also start fetching * descriptors by itself if it notices new ones are * present when it goes to deliver a tx done interrupt * to the host. So if we race with tx done processing * it's ok. Delivering the kick here rather than in * mwl_tx_start is an optimization to avoid poking the * firmware for each packet. * * NB: the queue id isn't used so 0 is ok. */ mwl_hal_txstart(sc->sc_mh, 0/*XXX*/); } } static int mwl_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = ni->ni_ic; struct mwl_softc *sc = ic->ic_softc; struct mwl_txbuf *bf; struct mwl_txq *txq; if (!sc->sc_running || sc->sc_invalid) { m_freem(m); return ENETDOWN; } /* * Grab a TX buffer and associated resources. * Note that we depend on the classification * by the 802.11 layer to get to the right h/w * queue. Management frames must ALWAYS go on * queue 1 but we cannot just force that here * because we may receive non-mgt frames. */ txq = sc->sc_ac2q[M_WME_GETAC(m)]; bf = mwl_gettxbuf(sc, txq); if (bf == NULL) { sc->sc_stats.mst_tx_qstop++; m_freem(m); return ENOBUFS; } /* * Pass the frame to the h/w for transmission. */ if (mwl_tx_start(sc, ni, bf, m)) { mwl_puttxbuf_head(txq, bf); return EIO; /* XXX */ } /* * NB: We don't need to lock against tx done because * this just prods the firmware to check the transmit * descriptors. The firmware will also start fetching * descriptors by itself if it notices new ones are * present when it goes to deliver a tx done interrupt * to the host. So if we race with tx done processing * it's ok. Delivering the kick here rather than in * mwl_tx_start is an optimization to avoid poking the * firmware for each packet. * * NB: the queue id isn't used so 0 is ok. */ mwl_hal_txstart(sc->sc_mh, 0/*XXX*/); return 0; } static int mwl_media_change(if_t ifp) { struct ieee80211vap *vap; int error; /* NB: only the fixed rate can change and that doesn't need a reset */ error = ieee80211_media_change(ifp); if (error != 0) return (error); vap = if_getsoftc(ifp); mwl_setrates(vap); return (0); } #ifdef MWL_DEBUG static void mwl_keyprint(struct mwl_softc *sc, const char *tag, const MWL_HAL_KEYVAL *hk, const uint8_t mac[IEEE80211_ADDR_LEN]) { static const char *ciphers[] = { "WEP", "TKIP", "AES-CCM", }; int i, n; printf("%s: [%u] %-7s", tag, hk->keyIndex, ciphers[hk->keyTypeId]); for (i = 0, n = hk->keyLen; i < n; i++) printf(" %02x", hk->key.aes[i]); printf(" mac %s", ether_sprintf(mac)); if (hk->keyTypeId == KEY_TYPE_ID_TKIP) { printf(" %s", "rxmic"); for (i = 0; i < sizeof(hk->key.tkip.rxMic); i++) printf(" %02x", hk->key.tkip.rxMic[i]); printf(" txmic"); for (i = 0; i < sizeof(hk->key.tkip.txMic); i++) printf(" %02x", hk->key.tkip.txMic[i]); } printf(" flags 0x%x\n", hk->keyFlags); } #endif /* * Allocate a key cache slot for a unicast key. The * firmware handles key allocation and every station is * guaranteed key space so we are always successful. */ static int mwl_key_alloc(struct ieee80211vap *vap, struct ieee80211_key *k, ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix) { struct mwl_softc *sc = vap->iv_ic->ic_softc; if (k->wk_keyix != IEEE80211_KEYIX_NONE || (k->wk_flags & IEEE80211_KEY_GROUP)) { if (!(&vap->iv_nw_keys[0] <= k && k < &vap->iv_nw_keys[IEEE80211_WEP_NKID])) { /* should not happen */ DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: bogus group key\n", __func__); return 0; } /* give the caller what they requested */ *keyix = *rxkeyix = ieee80211_crypto_get_key_wepidx(vap, k); } else { /* * Firmware handles key allocation. */ *keyix = *rxkeyix = 0; } return 1; } /* * Delete a key entry allocated by mwl_key_alloc. */ static int mwl_key_delete(struct ieee80211vap *vap, const struct ieee80211_key *k) { struct mwl_softc *sc = vap->iv_ic->ic_softc; struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; MWL_HAL_KEYVAL hk; const uint8_t bcastaddr[IEEE80211_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; if (hvap == NULL) { if (vap->iv_opmode != IEEE80211_M_WDS) { /* XXX monitor mode? */ DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: no hvap for opmode %d\n", __func__, vap->iv_opmode); return 0; } hvap = MWL_VAP(vap)->mv_ap_hvap; } DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: delete key %u\n", __func__, k->wk_keyix); memset(&hk, 0, sizeof(hk)); hk.keyIndex = k->wk_keyix; switch (k->wk_cipher->ic_cipher) { case IEEE80211_CIPHER_WEP: hk.keyTypeId = KEY_TYPE_ID_WEP; break; case IEEE80211_CIPHER_TKIP: hk.keyTypeId = KEY_TYPE_ID_TKIP; break; case IEEE80211_CIPHER_AES_CCM: hk.keyTypeId = KEY_TYPE_ID_AES; break; default: /* XXX should not happen */ DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n", __func__, k->wk_cipher->ic_cipher); return 0; } return (mwl_hal_keyreset(hvap, &hk, bcastaddr) == 0); /*XXX*/ } static __inline int addgroupflags(MWL_HAL_KEYVAL *hk, const struct ieee80211_key *k) { if (k->wk_flags & IEEE80211_KEY_GROUP) { if (k->wk_flags & IEEE80211_KEY_XMIT) hk->keyFlags |= KEY_FLAG_TXGROUPKEY; if (k->wk_flags & IEEE80211_KEY_RECV) hk->keyFlags |= KEY_FLAG_RXGROUPKEY; return 1; } else return 0; } /* * Set the key cache contents for the specified key. Key cache * slot(s) must already have been allocated by mwl_key_alloc. */ static int mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k) { return (_mwl_key_set(vap, k, k->wk_macaddr)); } static int _mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k, const uint8_t mac[IEEE80211_ADDR_LEN]) { #define GRPXMIT (IEEE80211_KEY_XMIT | IEEE80211_KEY_GROUP) /* NB: static wep keys are marked GROUP+tx/rx; GTK will be tx or rx */ #define IEEE80211_IS_STATICKEY(k) \ (((k)->wk_flags & (GRPXMIT|IEEE80211_KEY_RECV)) == \ (GRPXMIT|IEEE80211_KEY_RECV)) struct mwl_softc *sc = vap->iv_ic->ic_softc; struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; const struct ieee80211_cipher *cip = k->wk_cipher; const uint8_t *macaddr; MWL_HAL_KEYVAL hk; KASSERT((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0, ("s/w crypto set?")); if (hvap == NULL) { if (vap->iv_opmode != IEEE80211_M_WDS) { /* XXX monitor mode? */ DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: no hvap for opmode %d\n", __func__, vap->iv_opmode); return 0; } hvap = MWL_VAP(vap)->mv_ap_hvap; } memset(&hk, 0, sizeof(hk)); hk.keyIndex = k->wk_keyix; switch (cip->ic_cipher) { case IEEE80211_CIPHER_WEP: hk.keyTypeId = KEY_TYPE_ID_WEP; hk.keyLen = k->wk_keylen; if (k->wk_keyix == vap->iv_def_txkey) hk.keyFlags = KEY_FLAG_WEP_TXKEY; if (!IEEE80211_IS_STATICKEY(k)) { /* NB: WEP is never used for the PTK */ (void) addgroupflags(&hk, k); } break; case IEEE80211_CIPHER_TKIP: hk.keyTypeId = KEY_TYPE_ID_TKIP; hk.key.tkip.tsc.high = (uint32_t)(k->wk_keytsc >> 16); hk.key.tkip.tsc.low = (uint16_t)k->wk_keytsc; hk.keyFlags = KEY_FLAG_TSC_VALID | KEY_FLAG_MICKEY_VALID; hk.keyLen = k->wk_keylen + IEEE80211_MICBUF_SIZE; if (!addgroupflags(&hk, k)) hk.keyFlags |= KEY_FLAG_PAIRWISE; break; case IEEE80211_CIPHER_AES_CCM: hk.keyTypeId = KEY_TYPE_ID_AES; hk.keyLen = k->wk_keylen; if (!addgroupflags(&hk, k)) hk.keyFlags |= KEY_FLAG_PAIRWISE; break; default: /* XXX should not happen */ DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n", __func__, k->wk_cipher->ic_cipher); return 0; } /* * NB: tkip mic keys get copied here too; the layout * just happens to match that in ieee80211_key. */ memcpy(hk.key.aes, k->wk_key, hk.keyLen); /* * Locate address of sta db entry for writing key; * the convention unfortunately is somewhat different * than how net80211, hostapd, and wpa_supplicant think. */ if (vap->iv_opmode == IEEE80211_M_STA) { /* * NB: keys plumbed before the sta reaches AUTH state * will be discarded or written to the wrong sta db * entry because iv_bss is meaningless. This is ok * (right now) because we handle deferred plumbing of * WEP keys when the sta reaches AUTH state. */ macaddr = vap->iv_bss->ni_bssid; if ((k->wk_flags & IEEE80211_KEY_GROUP) == 0) { /* XXX plumb to local sta db too for static key wep */ mwl_hal_keyset(hvap, &hk, vap->iv_myaddr); } } else if (vap->iv_opmode == IEEE80211_M_WDS && vap->iv_state != IEEE80211_S_RUN) { /* * Prior to RUN state a WDS vap will not it's BSS node * setup so we will plumb the key to the wrong mac * address (it'll be our local address). Workaround * this for the moment by grabbing the correct address. */ macaddr = vap->iv_des_bssid; } else if ((k->wk_flags & GRPXMIT) == GRPXMIT) macaddr = vap->iv_myaddr; else macaddr = mac; KEYPRINTF(sc, &hk, macaddr); return (mwl_hal_keyset(hvap, &hk, macaddr) == 0); #undef IEEE80211_IS_STATICKEY #undef GRPXMIT } /* * Set the multicast filter contents into the hardware. * XXX f/w has no support; just defer to the os. */ static void mwl_setmcastfilter(struct mwl_softc *sc) { #if 0 struct ether_multi *enm; struct ether_multistep estep; uint8_t macs[IEEE80211_ADDR_LEN*MWL_HAL_MCAST_MAX];/* XXX stack use */ uint8_t *mp; int nmc; mp = macs; nmc = 0; ETHER_FIRST_MULTI(estep, &sc->sc_ec, enm); while (enm != NULL) { /* XXX Punt on ranges. */ if (nmc == MWL_HAL_MCAST_MAX || !IEEE80211_ADDR_EQ(enm->enm_addrlo, enm->enm_addrhi)) { if_setflagsbit(ifp, IFF_ALLMULTI, 0); return; } IEEE80211_ADDR_COPY(mp, enm->enm_addrlo); mp += IEEE80211_ADDR_LEN, nmc++; ETHER_NEXT_MULTI(estep, enm); } if_setflagsbit(ifp, 0, IFF_ALLMULTI); mwl_hal_setmcast(sc->sc_mh, nmc, macs); #endif } static int mwl_mode_init(struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct mwl_hal *mh = sc->sc_mh; mwl_hal_setpromisc(mh, ic->ic_promisc > 0); mwl_setmcastfilter(sc); return 0; } /* * Callback from the 802.11 layer after a multicast state change. */ static void mwl_update_mcast(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; mwl_setmcastfilter(sc); } /* * Callback from the 802.11 layer after a promiscuous mode change. * Note this interface does not check the operating mode as this * is an internal callback and we are expected to honor the current * state (e.g. this is used for setting the interface in promiscuous * mode when operating in hostap mode to do ACS). */ static void mwl_update_promisc(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; mwl_hal_setpromisc(sc->sc_mh, ic->ic_promisc > 0); } /* * Callback from the 802.11 layer to update the slot time * based on the current setting. We use it to notify the * firmware of ERP changes and the f/w takes care of things * like slot time and preamble. */ static void mwl_updateslot(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; struct mwl_hal *mh = sc->sc_mh; int prot; /* NB: can be called early; suppress needless cmds */ if (!sc->sc_running) return; /* * Calculate the ERP flags. The firwmare will use * this to carry out the appropriate measures. */ prot = 0; if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) { if ((ic->ic_flags & IEEE80211_F_SHSLOT) == 0) prot |= IEEE80211_ERP_NON_ERP_PRESENT; if (ic->ic_flags & IEEE80211_F_USEPROT) prot |= IEEE80211_ERP_USE_PROTECTION; if (ic->ic_flags & IEEE80211_F_USEBARKER) prot |= IEEE80211_ERP_LONG_PREAMBLE; } DPRINTF(sc, MWL_DEBUG_RESET, "%s: chan %u MHz/flags 0x%x %s slot, (prot 0x%x ic_flags 0x%x)\n", __func__, ic->ic_curchan->ic_freq, ic->ic_curchan->ic_flags, ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", prot, ic->ic_flags); mwl_hal_setgprot(mh, prot); } /* * Setup the beacon frame. */ static int mwl_beacon_setup(struct ieee80211vap *vap) { struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; struct ieee80211_node *ni = vap->iv_bss; struct mbuf *m; m = ieee80211_beacon_alloc(ni); if (m == NULL) return ENOBUFS; mwl_hal_setbeacon(hvap, mtod(m, const void *), m->m_len); m_free(m); return 0; } /* * Update the beacon frame in response to a change. */ static void mwl_beacon_update(struct ieee80211vap *vap, int item) { struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; struct ieee80211com *ic = vap->iv_ic; KASSERT(hvap != NULL, ("no beacon")); switch (item) { case IEEE80211_BEACON_ERP: mwl_updateslot(ic); break; case IEEE80211_BEACON_HTINFO: mwl_hal_setnprotmode(hvap, _IEEE80211_MASKSHIFT( ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE)); break; case IEEE80211_BEACON_CAPS: case IEEE80211_BEACON_WME: case IEEE80211_BEACON_APPIE: case IEEE80211_BEACON_CSA: break; case IEEE80211_BEACON_TIM: /* NB: firmware always forms TIM */ return; } /* XXX retain beacon frame and update */ mwl_beacon_setup(vap); } static void mwl_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { bus_addr_t *paddr = (bus_addr_t*) arg; KASSERT(error == 0, ("error %u on bus_dma callback", error)); *paddr = segs->ds_addr; } #ifdef MWL_HOST_PS_SUPPORT /* * Handle power save station occupancy changes. */ static void mwl_update_ps(struct ieee80211vap *vap, int nsta) { struct mwl_vap *mvp = MWL_VAP(vap); if (nsta == 0 || mvp->mv_last_ps_sta == 0) mwl_hal_setpowersave_bss(mvp->mv_hvap, nsta); mvp->mv_last_ps_sta = nsta; } /* * Handle associated station power save state changes. */ static int mwl_set_tim(struct ieee80211_node *ni, int set) { struct ieee80211vap *vap = ni->ni_vap; struct mwl_vap *mvp = MWL_VAP(vap); if (mvp->mv_set_tim(ni, set)) { /* NB: state change */ mwl_hal_setpowersave_sta(mvp->mv_hvap, IEEE80211_AID(ni->ni_associd), set); return 1; } else return 0; } #endif /* MWL_HOST_PS_SUPPORT */ static int mwl_desc_setup(struct mwl_softc *sc, const char *name, struct mwl_descdma *dd, int nbuf, size_t bufsize, int ndesc, size_t descsize) { uint8_t *ds; int error; DPRINTF(sc, MWL_DEBUG_RESET, "%s: %s DMA: %u bufs (%ju) %u desc/buf (%ju)\n", __func__, name, nbuf, (uintmax_t) bufsize, ndesc, (uintmax_t) descsize); dd->dd_name = name; dd->dd_desc_len = nbuf * ndesc * descsize; /* * Setup DMA descriptor area. */ error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), /* parent */ PAGE_SIZE, 0, /* alignment, bounds */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ dd->dd_desc_len, /* maxsize */ 1, /* nsegments */ dd->dd_desc_len, /* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ NULL, /* lockfunc */ NULL, /* lockarg */ &dd->dd_dmat); if (error != 0) { device_printf(sc->sc_dev, "cannot allocate %s DMA tag\n", dd->dd_name); return error; } /* allocate descriptors */ error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc, BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dd->dd_dmamap); if (error != 0) { device_printf(sc->sc_dev, "unable to alloc memory for %u %s descriptors, " "error %u\n", nbuf * ndesc, dd->dd_name, error); goto fail1; } error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap, dd->dd_desc, dd->dd_desc_len, mwl_load_cb, &dd->dd_desc_paddr, BUS_DMA_NOWAIT); if (error != 0) { device_printf(sc->sc_dev, "unable to map %s descriptors, error %u\n", dd->dd_name, error); goto fail2; } ds = dd->dd_desc; memset(ds, 0, dd->dd_desc_len); DPRINTF(sc, MWL_DEBUG_RESET, "%s: %s DMA map: %p (%lu) -> 0x%jx (%lu)\n", __func__, dd->dd_name, ds, (u_long) dd->dd_desc_len, (uintmax_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len); return 0; fail2: bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); fail1: bus_dma_tag_destroy(dd->dd_dmat); memset(dd, 0, sizeof(*dd)); return error; #undef DS2PHYS } static void mwl_desc_cleanup(struct mwl_softc *sc, struct mwl_descdma *dd) { bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); bus_dma_tag_destroy(dd->dd_dmat); memset(dd, 0, sizeof(*dd)); } /* * Construct a tx q's free list. The order of entries on * the list must reflect the physical layout of tx descriptors * because the firmware pre-fetches descriptors. * * XXX might be better to use indices into the buffer array. */ static void mwl_txq_reset(struct mwl_softc *sc, struct mwl_txq *txq) { struct mwl_txbuf *bf; int i; bf = txq->dma.dd_bufptr; STAILQ_INIT(&txq->free); for (i = 0; i < mwl_txbuf; i++, bf++) STAILQ_INSERT_TAIL(&txq->free, bf, bf_list); txq->nfree = i; } #define DS2PHYS(_dd, _ds) \ ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) static int mwl_txdma_setup(struct mwl_softc *sc, struct mwl_txq *txq) { int error, bsize, i; struct mwl_txbuf *bf; struct mwl_txdesc *ds; error = mwl_desc_setup(sc, "tx", &txq->dma, mwl_txbuf, sizeof(struct mwl_txbuf), MWL_TXDESC, sizeof(struct mwl_txdesc)); if (error != 0) return error; /* allocate and setup tx buffers */ bsize = mwl_txbuf * sizeof(struct mwl_txbuf); bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO); if (bf == NULL) { device_printf(sc->sc_dev, "malloc of %u tx buffers failed\n", mwl_txbuf); return ENOMEM; } txq->dma.dd_bufptr = bf; ds = txq->dma.dd_desc; for (i = 0; i < mwl_txbuf; i++, bf++, ds += MWL_TXDESC) { bf->bf_desc = ds; bf->bf_daddr = DS2PHYS(&txq->dma, ds); error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT, &bf->bf_dmamap); if (error != 0) { device_printf(sc->sc_dev, "unable to create dmamap for tx " "buffer %u, error %u\n", i, error); return error; } } mwl_txq_reset(sc, txq); return 0; } static void mwl_txdma_cleanup(struct mwl_softc *sc, struct mwl_txq *txq) { struct mwl_txbuf *bf; int i; bf = txq->dma.dd_bufptr; for (i = 0; i < mwl_txbuf; i++, bf++) { KASSERT(bf->bf_m == NULL, ("mbuf on free list")); KASSERT(bf->bf_node == NULL, ("node on free list")); if (bf->bf_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap); } STAILQ_INIT(&txq->free); txq->nfree = 0; if (txq->dma.dd_bufptr != NULL) { free(txq->dma.dd_bufptr, M_MWLDEV); txq->dma.dd_bufptr = NULL; } if (txq->dma.dd_desc_len != 0) mwl_desc_cleanup(sc, &txq->dma); } static int mwl_rxdma_setup(struct mwl_softc *sc) { int error, jumbosize, bsize, i; struct mwl_rxbuf *bf; struct mwl_jumbo *rbuf; struct mwl_rxdesc *ds; caddr_t data; error = mwl_desc_setup(sc, "rx", &sc->sc_rxdma, mwl_rxdesc, sizeof(struct mwl_rxbuf), 1, sizeof(struct mwl_rxdesc)); if (error != 0) return error; /* * Receive is done to a private pool of jumbo buffers. * This allows us to attach to mbuf's and avoid re-mapping * memory on each rx we post. We allocate a large chunk * of memory and manage it in the driver. The mbuf free * callback method is used to reclaim frames after sending * them up the stack. By default we allocate 2x the number of * rx descriptors configured so we have some slop to hold * us while frames are processed. */ if (mwl_rxbuf < 2*mwl_rxdesc) { device_printf(sc->sc_dev, "too few rx dma buffers (%d); increasing to %d\n", mwl_rxbuf, 2*mwl_rxdesc); mwl_rxbuf = 2*mwl_rxdesc; } jumbosize = roundup(MWL_AGGR_SIZE, PAGE_SIZE); sc->sc_rxmemsize = mwl_rxbuf*jumbosize; error = bus_dma_tag_create(sc->sc_dmat, /* parent */ PAGE_SIZE, 0, /* alignment, bounds */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ sc->sc_rxmemsize, /* maxsize */ 1, /* nsegments */ sc->sc_rxmemsize, /* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ NULL, /* lockfunc */ NULL, /* lockarg */ &sc->sc_rxdmat); if (error != 0) { device_printf(sc->sc_dev, "could not create rx DMA tag\n"); return error; } error = bus_dmamem_alloc(sc->sc_rxdmat, (void**) &sc->sc_rxmem, BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &sc->sc_rxmap); if (error != 0) { device_printf(sc->sc_dev, "could not alloc %ju bytes of rx DMA memory\n", (uintmax_t) sc->sc_rxmemsize); return error; } error = bus_dmamap_load(sc->sc_rxdmat, sc->sc_rxmap, sc->sc_rxmem, sc->sc_rxmemsize, mwl_load_cb, &sc->sc_rxmem_paddr, BUS_DMA_NOWAIT); if (error != 0) { device_printf(sc->sc_dev, "could not load rx DMA map\n"); return error; } /* * Allocate rx buffers and set them up. */ bsize = mwl_rxdesc * sizeof(struct mwl_rxbuf); bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO); if (bf == NULL) { device_printf(sc->sc_dev, "malloc of %u rx buffers failed\n", bsize); return error; } sc->sc_rxdma.dd_bufptr = bf; STAILQ_INIT(&sc->sc_rxbuf); ds = sc->sc_rxdma.dd_desc; for (i = 0; i < mwl_rxdesc; i++, bf++, ds++) { bf->bf_desc = ds; bf->bf_daddr = DS2PHYS(&sc->sc_rxdma, ds); /* pre-assign dma buffer */ bf->bf_data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize); /* NB: tail is intentional to preserve descriptor order */ STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list); } /* * Place remainder of dma memory buffers on the free list. */ SLIST_INIT(&sc->sc_rxfree); for (; i < mwl_rxbuf; i++) { data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize); rbuf = MWL_JUMBO_DATA2BUF(data); SLIST_INSERT_HEAD(&sc->sc_rxfree, rbuf, next); sc->sc_nrxfree++; } return 0; } #undef DS2PHYS static void mwl_rxdma_cleanup(struct mwl_softc *sc) { if (sc->sc_rxmem_paddr != 0) { bus_dmamap_unload(sc->sc_rxdmat, sc->sc_rxmap); sc->sc_rxmem_paddr = 0; } if (sc->sc_rxmem != NULL) { bus_dmamem_free(sc->sc_rxdmat, sc->sc_rxmem, sc->sc_rxmap); sc->sc_rxmem = NULL; } if (sc->sc_rxdma.dd_bufptr != NULL) { free(sc->sc_rxdma.dd_bufptr, M_MWLDEV); sc->sc_rxdma.dd_bufptr = NULL; } if (sc->sc_rxdma.dd_desc_len != 0) mwl_desc_cleanup(sc, &sc->sc_rxdma); } static int mwl_dma_setup(struct mwl_softc *sc) { int error, i; error = mwl_rxdma_setup(sc); if (error != 0) { mwl_rxdma_cleanup(sc); return error; } for (i = 0; i < MWL_NUM_TX_QUEUES; i++) { error = mwl_txdma_setup(sc, &sc->sc_txq[i]); if (error != 0) { mwl_dma_cleanup(sc); return error; } } return 0; } static void mwl_dma_cleanup(struct mwl_softc *sc) { int i; for (i = 0; i < MWL_NUM_TX_QUEUES; i++) mwl_txdma_cleanup(sc, &sc->sc_txq[i]); mwl_rxdma_cleanup(sc); } static struct ieee80211_node * mwl_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct mwl_softc *sc = ic->ic_softc; const size_t space = sizeof(struct mwl_node); struct mwl_node *mn; mn = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO); if (mn == NULL) { /* XXX stat+msg */ return NULL; } DPRINTF(sc, MWL_DEBUG_NODE, "%s: mn %p\n", __func__, mn); return &mn->mn_node; } static void mwl_node_cleanup(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct mwl_softc *sc = ic->ic_softc; struct mwl_node *mn = MWL_NODE(ni); DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p ic %p staid %d\n", __func__, ni, ni->ni_ic, mn->mn_staid); if (mn->mn_staid != 0) { struct ieee80211vap *vap = ni->ni_vap; if (mn->mn_hvap != NULL) { if (vap->iv_opmode == IEEE80211_M_STA) mwl_hal_delstation(mn->mn_hvap, vap->iv_myaddr); else mwl_hal_delstation(mn->mn_hvap, ni->ni_macaddr); } /* * NB: legacy WDS peer sta db entry is installed using * the associate ap's hvap; use it again to delete it. * XXX can vap be NULL? */ else if (vap->iv_opmode == IEEE80211_M_WDS && MWL_VAP(vap)->mv_ap_hvap != NULL) mwl_hal_delstation(MWL_VAP(vap)->mv_ap_hvap, ni->ni_macaddr); delstaid(sc, mn->mn_staid); mn->mn_staid = 0; } sc->sc_node_cleanup(ni); } /* * Reclaim rx dma buffers from packets sitting on the ampdu * reorder queue for a station. We replace buffers with a * system cluster (if available). */ static void mwl_ampdu_rxdma_reclaim(struct ieee80211_rx_ampdu *rap) { #if 0 int i, n, off; struct mbuf *m; void *cl; n = rap->rxa_qframes; for (i = 0; i < rap->rxa_wnd && n > 0; i++) { m = rap->rxa_m[i]; if (m == NULL) continue; n--; /* our dma buffers have a well-known free routine */ if ((m->m_flags & M_EXT) == 0 || m->m_ext.ext_free != mwl_ext_free) continue; /* * Try to allocate a cluster and move the data. */ off = m->m_data - m->m_ext.ext_buf; if (off + m->m_pkthdr.len > MCLBYTES) { /* XXX no AMSDU for now */ continue; } cl = pool_cache_get_paddr(&mclpool_cache, 0, &m->m_ext.ext_paddr); if (cl != NULL) { /* * Copy the existing data to the cluster, remove * the rx dma buffer, and attach the cluster in * its place. Note we preserve the offset to the * data so frames being bridged can still prepend * their headers without adding another mbuf. */ memcpy((caddr_t) cl + off, m->m_data, m->m_pkthdr.len); MEXTREMOVE(m); MEXTADD(m, cl, MCLBYTES, 0, NULL, &mclpool_cache); /* setup mbuf like _MCLGET does */ m->m_flags |= M_CLUSTER | M_EXT_RW; _MOWNERREF(m, M_EXT | M_CLUSTER); /* NB: m_data is clobbered by MEXTADDR, adjust */ m->m_data += off; } } #endif } /* * Callback to reclaim resources. We first let the * net80211 layer do it's thing, then if we are still * blocked by a lack of rx dma buffers we walk the ampdu * reorder q's to reclaim buffers by copying to a system * cluster. */ static void mwl_node_drain(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct mwl_softc *sc = ic->ic_softc; struct mwl_node *mn = MWL_NODE(ni); DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p vap %p staid %d\n", __func__, ni, ni->ni_vap, mn->mn_staid); /* NB: call up first to age out ampdu q's */ sc->sc_node_drain(ni); /* XXX better to not check low water mark? */ if (sc->sc_rxblocked && mn->mn_staid != 0 && (ni->ni_flags & IEEE80211_NODE_HT)) { uint8_t tid; /* * Walk the reorder q and reclaim rx dma buffers by copying * the packet contents into clusters. */ for (tid = 0; tid < WME_NUM_TID; tid++) { struct ieee80211_rx_ampdu *rap; rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) continue; if (rap->rxa_qframes) mwl_ampdu_rxdma_reclaim(rap); } } } static void mwl_node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) { *rssi = ni->ni_ic->ic_node_getrssi(ni); #ifdef MWL_ANT_INFO_SUPPORT #if 0 /* XXX need to smooth data */ *noise = -MWL_NODE_CONST(ni)->mn_ai.nf; #else *noise = -95; /* XXX */ #endif #else *noise = -95; /* XXX */ #endif } /* * Convert Hardware per-antenna rssi info to common format: * Let a1, a2, a3 represent the amplitudes per chain * Let amax represent max[a1, a2, a3] * Rssi1_dBm = RSSI_dBm + 20*log10(a1/amax) * Rssi1_dBm = RSSI_dBm + 20*log10(a1) - 20*log10(amax) * We store a table that is 4*20*log10(idx) - the extra 4 is to store or * maintain some extra precision. * * Values are stored in .5 db format capped at 127. */ static void mwl_node_getmimoinfo(const struct ieee80211_node *ni, struct ieee80211_mimo_info *mi) { #define CVT(_dst, _src) do { \ (_dst) = rssi + ((logdbtbl[_src] - logdbtbl[rssi_max]) >> 2); \ (_dst) = (_dst) > 64 ? 127 : ((_dst) << 1); \ } while (0) static const int8_t logdbtbl[32] = { 0, 0, 24, 38, 48, 56, 62, 68, 72, 76, 80, 83, 86, 89, 92, 94, 96, 98, 100, 102, 104, 106, 107, 109, 110, 112, 113, 115, 116, 117, 118, 119 }; const struct mwl_node *mn = MWL_NODE_CONST(ni); uint8_t rssi = mn->mn_ai.rsvd1/2; /* XXX */ uint32_t rssi_max; rssi_max = mn->mn_ai.rssi_a; if (mn->mn_ai.rssi_b > rssi_max) rssi_max = mn->mn_ai.rssi_b; if (mn->mn_ai.rssi_c > rssi_max) rssi_max = mn->mn_ai.rssi_c; CVT(mi->ch[0].rssi[0], mn->mn_ai.rssi_a); CVT(mi->ch[1].rssi[0], mn->mn_ai.rssi_b); CVT(mi->ch[2].rssi[0], mn->mn_ai.rssi_c); mi->ch[0].noise[0] = mn->mn_ai.nf_a; mi->ch[1].noise[0] = mn->mn_ai.nf_b; mi->ch[2].noise[0] = mn->mn_ai.nf_c; #undef CVT } static __inline void * mwl_getrxdma(struct mwl_softc *sc) { struct mwl_jumbo *buf; void *data; /* * Allocate from jumbo pool. */ MWL_RXFREE_LOCK(sc); buf = SLIST_FIRST(&sc->sc_rxfree); if (buf == NULL) { DPRINTF(sc, MWL_DEBUG_ANY, "%s: out of rx dma buffers\n", __func__); sc->sc_stats.mst_rx_nodmabuf++; data = NULL; } else { SLIST_REMOVE_HEAD(&sc->sc_rxfree, next); sc->sc_nrxfree--; data = MWL_JUMBO_BUF2DATA(buf); } MWL_RXFREE_UNLOCK(sc); return data; } static __inline void mwl_putrxdma(struct mwl_softc *sc, void *data) { struct mwl_jumbo *buf; /* XXX bounds check data */ MWL_RXFREE_LOCK(sc); buf = MWL_JUMBO_DATA2BUF(data); SLIST_INSERT_HEAD(&sc->sc_rxfree, buf, next); sc->sc_nrxfree++; MWL_RXFREE_UNLOCK(sc); } static int mwl_rxbuf_init(struct mwl_softc *sc, struct mwl_rxbuf *bf) { struct mwl_rxdesc *ds; ds = bf->bf_desc; if (bf->bf_data == NULL) { bf->bf_data = mwl_getrxdma(sc); if (bf->bf_data == NULL) { /* mark descriptor to be skipped */ ds->RxControl = EAGLE_RXD_CTRL_OS_OWN; /* NB: don't need PREREAD */ MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREWRITE); sc->sc_stats.mst_rxbuf_failed++; return ENOMEM; } } /* * NB: DMA buffer contents is known to be unmodified * so there's no need to flush the data cache. */ /* * Setup descriptor. */ ds->QosCtrl = 0; ds->RSSI = 0; ds->Status = EAGLE_RXD_STATUS_IDLE; ds->Channel = 0; ds->PktLen = htole16(MWL_AGGR_SIZE); ds->SQ2 = 0; ds->pPhysBuffData = htole32(MWL_JUMBO_DMA_ADDR(sc, bf->bf_data)); /* NB: don't touch pPhysNext, set once */ ds->RxControl = EAGLE_RXD_CTRL_DRIVER_OWN; MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return 0; } static void mwl_ext_free(struct mbuf *m) { struct mwl_softc *sc = m->m_ext.ext_arg1; /* XXX bounds check data */ mwl_putrxdma(sc, m->m_ext.ext_buf); /* * If we were previously blocked by a lack of rx dma buffers * check if we now have enough to restart rx interrupt handling. - * NB: we know we are called at splvm which is above splnet. */ if (sc->sc_rxblocked && sc->sc_nrxfree > mwl_rxdmalow) { sc->sc_rxblocked = 0; mwl_hal_intrset(sc->sc_mh, sc->sc_imask); } } struct mwl_frame_bar { u_int8_t i_fc[2]; u_int8_t i_dur[2]; u_int8_t i_ra[IEEE80211_ADDR_LEN]; u_int8_t i_ta[IEEE80211_ADDR_LEN]; /* ctl, seq, FCS */ } __packed; /* * Like ieee80211_anyhdrsize, but handles BAR frames * specially so the logic below to piece the 802.11 * header together works. */ static __inline int mwl_anyhdrsize(const void *data) { const struct ieee80211_frame *wh = data; if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) { switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) { case IEEE80211_FC0_SUBTYPE_CTS: case IEEE80211_FC0_SUBTYPE_ACK: return sizeof(struct ieee80211_frame_ack); case IEEE80211_FC0_SUBTYPE_BAR: return sizeof(struct mwl_frame_bar); } return sizeof(struct ieee80211_frame_min); } else return ieee80211_hdrsize(data); } static void mwl_handlemicerror(struct ieee80211com *ic, const uint8_t *data) { const struct ieee80211_frame *wh; struct ieee80211_node *ni; wh = (const struct ieee80211_frame *)(data + sizeof(uint16_t)); ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh); if (ni != NULL) { ieee80211_notify_michael_failure(ni->ni_vap, wh, 0); ieee80211_free_node(ni); } } /* * Convert hardware signal strength to rssi. The value * provided by the device has the noise floor added in; * we need to compensate for this but we don't have that * so we use a fixed value. * * The offset of 8 is good for both 2.4 and 5GHz. The LNA * offset is already set as part of the initial gain. This * will give at least +/- 3dB for 2.4GHz and +/- 5dB for 5GHz. */ static __inline int cvtrssi(uint8_t ssi) { int rssi = (int) ssi + 8; /* XXX hack guess until we have a real noise floor */ rssi = 2*(87 - rssi); /* NB: .5 dBm units */ return (rssi < 0 ? 0 : rssi > 127 ? 127 : rssi); } static void mwl_rx_proc(void *arg, int npending) { struct epoch_tracker et; struct mwl_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; struct mwl_rxbuf *bf; struct mwl_rxdesc *ds; struct mbuf *m; struct ieee80211_qosframe *wh; struct ieee80211_node *ni; struct mwl_node *mn; int off, len, hdrlen, pktlen, rssi, ntodo; uint8_t *data, status; void *newdata; int16_t nf; DPRINTF(sc, MWL_DEBUG_RX_PROC, "%s: pending %u rdptr 0x%x wrptr 0x%x\n", __func__, npending, RD4(sc, sc->sc_hwspecs.rxDescRead), RD4(sc, sc->sc_hwspecs.rxDescWrite)); nf = -96; /* XXX */ bf = sc->sc_rxnext; for (ntodo = mwl_rxquota; ntodo > 0; ntodo--) { if (bf == NULL) bf = STAILQ_FIRST(&sc->sc_rxbuf); ds = bf->bf_desc; data = bf->bf_data; if (data == NULL) { /* * If data allocation failed previously there * will be no buffer; try again to re-populate it. * Note the firmware will not advance to the next * descriptor with a dma buffer so we must mimic * this or we'll get out of sync. */ DPRINTF(sc, MWL_DEBUG_ANY, "%s: rx buf w/o dma memory\n", __func__); (void) mwl_rxbuf_init(sc, bf); sc->sc_stats.mst_rx_dmabufmissing++; break; } MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); if (ds->RxControl != EAGLE_RXD_CTRL_DMA_OWN) break; #ifdef MWL_DEBUG if (sc->sc_debug & MWL_DEBUG_RECV_DESC) mwl_printrxbuf(bf, 0); #endif status = ds->Status; if (status & EAGLE_RXD_STATUS_DECRYPT_ERR_MASK) { counter_u64_add(ic->ic_ierrors, 1); sc->sc_stats.mst_rx_crypto++; /* * NB: Check EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR * for backwards compatibility. */ if (status != EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR && (status & EAGLE_RXD_STATUS_TKIP_MIC_DECRYPT_ERR)) { /* * MIC error, notify upper layers. */ bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap, BUS_DMASYNC_POSTREAD); mwl_handlemicerror(ic, data); sc->sc_stats.mst_rx_tkipmic++; } /* XXX too painful to tap packets */ goto rx_next; } /* * Sync the data buffer. */ len = le16toh(ds->PktLen); bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap, BUS_DMASYNC_POSTREAD); /* * The 802.11 header is provided all or in part at the front; * use it to calculate the true size of the header that we'll * construct below. We use this to figure out where to copy * payload prior to constructing the header. */ hdrlen = mwl_anyhdrsize(data + sizeof(uint16_t)); off = sizeof(uint16_t) + sizeof(struct ieee80211_frame_addr4); /* calculate rssi early so we can re-use for each aggregate */ rssi = cvtrssi(ds->RSSI); pktlen = hdrlen + (len - off); /* * NB: we know our frame is at least as large as * IEEE80211_MIN_LEN because there is a 4-address * frame at the front. Hence there's no need to * vet the packet length. If the frame in fact * is too small it should be discarded at the * net80211 layer. */ /* * Attach dma buffer to an mbuf. We tried * doing this based on the packet size (i.e. * copying small packets) but it turns out to * be a net loss. The tradeoff might be system * dependent (cache architecture is important). */ MGETHDR(m, M_NOWAIT, MT_DATA); if (m == NULL) { DPRINTF(sc, MWL_DEBUG_ANY, "%s: no rx mbuf\n", __func__); sc->sc_stats.mst_rx_nombuf++; goto rx_next; } /* * Acquire the replacement dma buffer before * processing the frame. If we're out of dma * buffers we disable rx interrupts and wait * for the free pool to reach mlw_rxdmalow buffers * before starting to do work again. If the firmware * runs out of descriptors then it will toss frames * which is better than our doing it as that can * starve our processing. It is also important that * we always process rx'd frames in case they are * A-MPDU as otherwise the host's view of the BA * window may get out of sync with the firmware. */ newdata = mwl_getrxdma(sc); if (newdata == NULL) { /* NB: stat+msg in mwl_getrxdma */ m_free(m); /* disable RX interrupt and mark state */ mwl_hal_intrset(sc->sc_mh, sc->sc_imask &~ MACREG_A2HRIC_BIT_RX_RDY); sc->sc_rxblocked = 1; ieee80211_drain(ic); /* XXX check rxblocked and immediately start again? */ goto rx_stop; } bf->bf_data = newdata; /* * Attach the dma buffer to the mbuf; * mwl_rxbuf_init will re-setup the rx * descriptor using the replacement dma * buffer we just installed above. */ m_extadd(m, data, MWL_AGGR_SIZE, mwl_ext_free, sc, NULL, 0, EXT_NET_DRV); m->m_data += off - hdrlen; m->m_pkthdr.len = m->m_len = pktlen; /* NB: dma buffer assumed read-only */ /* * Piece 802.11 header together. */ wh = mtod(m, struct ieee80211_qosframe *); /* NB: don't need to do this sometimes but ... */ /* XXX special case so we can memcpy after m_devget? */ ovbcopy(data + sizeof(uint16_t), wh, hdrlen); if (IEEE80211_QOS_HAS_SEQ(wh)) *(uint16_t *)ieee80211_getqos(wh) = ds->QosCtrl; /* * The f/w strips WEP header but doesn't clear * the WEP bit; mark the packet with M_WEP so * net80211 will treat the data as decrypted. * While here also clear the PWR_MGT bit since * power save is handled by the firmware and * passing this up will potentially cause the * upper layer to put a station in power save * (except when configured with MWL_HOST_PS_SUPPORT). */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) m->m_flags |= M_WEP; #ifdef MWL_HOST_PS_SUPPORT wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; #else wh->i_fc[1] &= ~(IEEE80211_FC1_PROTECTED | IEEE80211_FC1_PWR_MGT); #endif if (ieee80211_radiotap_active(ic)) { struct mwl_rx_radiotap_header *tap = &sc->sc_rx_th; tap->wr_flags = 0; tap->wr_rate = ds->Rate; tap->wr_antsignal = rssi + nf; tap->wr_antnoise = nf; } if (IFF_DUMPPKTS_RECV(sc, wh)) { ieee80211_dump_pkt(ic, mtod(m, caddr_t), len, ds->Rate, rssi); } /* dispatch */ ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh); NET_EPOCH_ENTER(et); if (ni != NULL) { mn = MWL_NODE(ni); #ifdef MWL_ANT_INFO_SUPPORT mn->mn_ai.rssi_a = ds->ai.rssi_a; mn->mn_ai.rssi_b = ds->ai.rssi_b; mn->mn_ai.rssi_c = ds->ai.rssi_c; mn->mn_ai.rsvd1 = rssi; #endif /* tag AMPDU aggregates for reorder processing */ if (ni->ni_flags & IEEE80211_NODE_HT) m->m_flags |= M_AMPDU; (void) ieee80211_input(ni, m, rssi, nf); ieee80211_free_node(ni); } else (void) ieee80211_input_all(ic, m, rssi, nf); NET_EPOCH_EXIT(et); rx_next: /* NB: ignore ENOMEM so we process more descriptors */ (void) mwl_rxbuf_init(sc, bf); bf = STAILQ_NEXT(bf, bf_list); } rx_stop: sc->sc_rxnext = bf; if (mbufq_first(&sc->sc_snd) != NULL) { /* NB: kick fw; the tx thread may have been preempted */ mwl_hal_txstart(sc->sc_mh, 0); mwl_start(sc); } } static void mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *txq, int qnum) { struct mwl_txbuf *bf, *bn; struct mwl_txdesc *ds; MWL_TXQ_LOCK_INIT(sc, txq); txq->qnum = qnum; txq->txpri = 0; /* XXX */ #if 0 /* NB: q setup by mwl_txdma_setup XXX */ STAILQ_INIT(&txq->free); #endif STAILQ_FOREACH(bf, &txq->free, bf_list) { bf->bf_txq = txq; ds = bf->bf_desc; bn = STAILQ_NEXT(bf, bf_list); if (bn == NULL) bn = STAILQ_FIRST(&txq->free); ds->pPhysNext = htole32(bn->bf_daddr); } STAILQ_INIT(&txq->active); } /* * Setup a hardware data transmit queue for the specified * access control. We record the mapping from ac's * to h/w queues for use by mwl_tx_start. */ static int mwl_tx_setup(struct mwl_softc *sc, int ac, int mvtype) { struct mwl_txq *txq; if (ac >= nitems(sc->sc_ac2q)) { device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n", ac, nitems(sc->sc_ac2q)); return 0; } if (mvtype >= MWL_NUM_TX_QUEUES) { device_printf(sc->sc_dev, "mvtype %u out of range, max %u!\n", mvtype, MWL_NUM_TX_QUEUES); return 0; } txq = &sc->sc_txq[mvtype]; mwl_txq_init(sc, txq, mvtype); sc->sc_ac2q[ac] = txq; return 1; } /* * Update WME parameters for a transmit queue. */ static int mwl_txq_update(struct mwl_softc *sc, int ac) { #define MWL_EXPONENT_TO_VALUE(v) ((1<sc_ic; struct chanAccParams chp; struct mwl_txq *txq = sc->sc_ac2q[ac]; struct wmeParams *wmep; struct mwl_hal *mh = sc->sc_mh; int aifs, cwmin, cwmax, txoplim; ieee80211_wme_ic_getparams(ic, &chp); wmep = &chp.cap_wmeParams[ac]; aifs = wmep->wmep_aifsn; /* XXX in sta mode need to pass log values for cwmin/max */ cwmin = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); cwmax = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); txoplim = wmep->wmep_txopLimit; /* NB: units of 32us */ if (mwl_hal_setedcaparams(mh, txq->qnum, cwmin, cwmax, aifs, txoplim)) { device_printf(sc->sc_dev, "unable to update hardware queue " "parameters for %s traffic!\n", ieee80211_wme_acnames[ac]); return 0; } return 1; #undef MWL_EXPONENT_TO_VALUE } /* * Callback from the 802.11 layer to update WME parameters. */ static int mwl_wme_update(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; return !mwl_txq_update(sc, WME_AC_BE) || !mwl_txq_update(sc, WME_AC_BK) || !mwl_txq_update(sc, WME_AC_VI) || !mwl_txq_update(sc, WME_AC_VO) ? EIO : 0; } /* * Reclaim resources for a setup queue. */ static void mwl_tx_cleanupq(struct mwl_softc *sc, struct mwl_txq *txq) { /* XXX hal work? */ MWL_TXQ_LOCK_DESTROY(txq); } /* * Reclaim all tx queue resources. */ static void mwl_tx_cleanup(struct mwl_softc *sc) { int i; for (i = 0; i < MWL_NUM_TX_QUEUES; i++) mwl_tx_cleanupq(sc, &sc->sc_txq[i]); } static int mwl_tx_dmasetup(struct mwl_softc *sc, struct mwl_txbuf *bf, struct mbuf *m0) { struct mbuf *m; int error; /* * Load the DMA map so any coalescing is done. This * also calculates the number of descriptors we need. */ error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0, bf->bf_segs, &bf->bf_nseg, BUS_DMA_NOWAIT); if (error == EFBIG) { /* XXX packet requires too many descriptors */ bf->bf_nseg = MWL_TXDESC+1; } else if (error != 0) { sc->sc_stats.mst_tx_busdma++; m_freem(m0); return error; } /* * Discard null packets and check for packets that * require too many TX descriptors. We try to convert * the latter to a cluster. */ if (error == EFBIG) { /* too many desc's, linearize */ sc->sc_stats.mst_tx_linear++; #if MWL_TXDESC > 1 m = m_collapse(m0, M_NOWAIT, MWL_TXDESC); #else m = m_defrag(m0, M_NOWAIT); #endif if (m == NULL) { m_freem(m0); sc->sc_stats.mst_tx_nombuf++; return ENOMEM; } m0 = m; error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0, bf->bf_segs, &bf->bf_nseg, BUS_DMA_NOWAIT); if (error != 0) { sc->sc_stats.mst_tx_busdma++; m_freem(m0); return error; } KASSERT(bf->bf_nseg <= MWL_TXDESC, ("too many segments after defrag; nseg %u", bf->bf_nseg)); } else if (bf->bf_nseg == 0) { /* null packet, discard */ sc->sc_stats.mst_tx_nodata++; m_freem(m0); return EIO; } DPRINTF(sc, MWL_DEBUG_XMIT, "%s: m %p len %u\n", __func__, m0, m0->m_pkthdr.len); bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); bf->bf_m = m0; return 0; } static __inline int mwl_cvtlegacyrate(int rate) { switch (rate) { case 2: return 0; case 4: return 1; case 11: return 2; case 22: return 3; case 44: return 4; case 12: return 5; case 18: return 6; case 24: return 7; case 36: return 8; case 48: return 9; case 72: return 10; case 96: return 11; case 108:return 12; } return 0; } /* * Calculate fixed tx rate information per client state; * this value is suitable for writing to the Format field * of a tx descriptor. */ static uint16_t mwl_calcformat(uint8_t rate, const struct ieee80211_node *ni) { uint16_t fmt; fmt = _IEEE80211_SHIFTMASK(3, EAGLE_TXD_ANTENNA) | (IEEE80211_IS_CHAN_HT40D(ni->ni_chan) ? EAGLE_TXD_EXTCHAN_LO : EAGLE_TXD_EXTCHAN_HI); if (rate & IEEE80211_RATE_MCS) { /* HT MCS */ fmt |= EAGLE_TXD_FORMAT_HT /* NB: 0x80 implicitly stripped from ucastrate */ | _IEEE80211_SHIFTMASK(rate, EAGLE_TXD_RATE); /* XXX short/long GI may be wrong; re-check */ if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { fmt |= EAGLE_TXD_CHW_40 | (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40 ? EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG); } else { fmt |= EAGLE_TXD_CHW_20 | (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20 ? EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG); } } else { /* legacy rate */ fmt |= EAGLE_TXD_FORMAT_LEGACY | _IEEE80211_SHIFTMASK(mwl_cvtlegacyrate(rate), EAGLE_TXD_RATE) | EAGLE_TXD_CHW_20 /* XXX iv_flags & IEEE80211_F_SHPREAMBLE? */ | (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE ? EAGLE_TXD_PREAMBLE_SHORT : EAGLE_TXD_PREAMBLE_LONG); } return fmt; } static int mwl_tx_start(struct mwl_softc *sc, struct ieee80211_node *ni, struct mwl_txbuf *bf, struct mbuf *m0) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = ni->ni_vap; int error, iswep, ismcast; int hdrlen, pktlen; struct mwl_txdesc *ds; struct mwl_txq *txq; struct ieee80211_frame *wh; struct mwltxrec *tr; struct mwl_node *mn; uint16_t qos; #if MWL_TXDESC > 1 int i; #endif wh = mtod(m0, struct ieee80211_frame *); iswep = wh->i_fc[1] & IEEE80211_FC1_PROTECTED; ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); hdrlen = ieee80211_anyhdrsize(wh); pktlen = m0->m_pkthdr.len; if (IEEE80211_QOS_HAS_SEQ(wh)) { qos = *(uint16_t *)ieee80211_getqos(wh); } else qos = 0; if (iswep) { const struct ieee80211_cipher *cip; struct ieee80211_key *k; /* * Construct the 802.11 header+trailer for an encrypted * frame. The only reason this can fail is because of an * unknown or unsupported cipher/key type. * * NB: we do this even though the firmware will ignore * what we've done for WEP and TKIP as we need the * ExtIV filled in for CCMP and this also adjusts * the headers which simplifies our work below. */ k = ieee80211_crypto_encap(ni, m0); if (k == NULL) { /* * This can happen when the key is yanked after the * frame was queued. Just discard the frame; the * 802.11 layer counts failures and provides * debugging/diagnostics. */ m_freem(m0); return EIO; } /* * Adjust the packet length for the crypto additions * done during encap and any other bits that the f/w * will add later on. */ cip = k->wk_cipher; pktlen += cip->ic_header + cip->ic_miclen + cip->ic_trailer; /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } if (ieee80211_radiotap_active_vap(vap)) { sc->sc_tx_th.wt_flags = 0; /* XXX */ if (iswep) sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP; #if 0 sc->sc_tx_th.wt_rate = ds->DataRate; #endif sc->sc_tx_th.wt_txpower = ni->ni_txpower; sc->sc_tx_th.wt_antenna = sc->sc_txantenna; ieee80211_radiotap_tx(vap, m0); } /* * Copy up/down the 802.11 header; the firmware requires * we present a 2-byte payload length followed by a * 4-address header (w/o QoS), followed (optionally) by * any WEP/ExtIV header (but only filled in for CCMP). * We are assured the mbuf has sufficient headroom to * prepend in-place by the setup of ic_headroom in * mwl_attach. */ if (hdrlen < sizeof(struct mwltxrec)) { const int space = sizeof(struct mwltxrec) - hdrlen; if (M_LEADINGSPACE(m0) < space) { /* NB: should never happen */ device_printf(sc->sc_dev, "not enough headroom, need %d found %zd, " "m_flags 0x%x m_len %d\n", space, M_LEADINGSPACE(m0), m0->m_flags, m0->m_len); ieee80211_dump_pkt(ic, mtod(m0, const uint8_t *), m0->m_len, 0, -1); m_freem(m0); sc->sc_stats.mst_tx_noheadroom++; return EIO; } M_PREPEND(m0, space, M_NOWAIT); } tr = mtod(m0, struct mwltxrec *); if (wh != (struct ieee80211_frame *) &tr->wh) ovbcopy(wh, &tr->wh, hdrlen); /* * Note: the "firmware length" is actually the length * of the fully formed "802.11 payload". That is, it's * everything except for the 802.11 header. In particular * this includes all crypto material including the MIC! */ tr->fwlen = htole16(pktlen - hdrlen); /* * Load the DMA map so any coalescing is done. This * also calculates the number of descriptors we need. */ error = mwl_tx_dmasetup(sc, bf, m0); if (error != 0) { /* NB: stat collected in mwl_tx_dmasetup */ DPRINTF(sc, MWL_DEBUG_XMIT, "%s: unable to setup dma\n", __func__); return error; } bf->bf_node = ni; /* NB: held reference */ m0 = bf->bf_m; /* NB: may have changed */ tr = mtod(m0, struct mwltxrec *); wh = (struct ieee80211_frame *)&tr->wh; /* * Formulate tx descriptor. */ ds = bf->bf_desc; txq = bf->bf_txq; ds->QosCtrl = qos; /* NB: already little-endian */ #if MWL_TXDESC == 1 /* * NB: multiframes should be zero because the descriptors * are initialized to zero. This should handle the case * where the driver is built with MWL_TXDESC=1 but we are * using firmware with multi-segment support. */ ds->PktPtr = htole32(bf->bf_segs[0].ds_addr); ds->PktLen = htole16(bf->bf_segs[0].ds_len); #else ds->multiframes = htole32(bf->bf_nseg); ds->PktLen = htole16(m0->m_pkthdr.len); for (i = 0; i < bf->bf_nseg; i++) { ds->PktPtrArray[i] = htole32(bf->bf_segs[i].ds_addr); ds->PktLenArray[i] = htole16(bf->bf_segs[i].ds_len); } #endif /* NB: pPhysNext, DataRate, and SapPktInfo setup once, don't touch */ ds->Format = 0; ds->pad = 0; ds->ack_wcb_addr = 0; mn = MWL_NODE(ni); /* * Select transmit rate. */ switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_MGT: sc->sc_stats.mst_tx_mgmt++; /* fall thru... */ case IEEE80211_FC0_TYPE_CTL: /* NB: assign to BE q to avoid bursting */ ds->TxPriority = MWL_WME_AC_BE; break; case IEEE80211_FC0_TYPE_DATA: if (!ismcast) { const struct ieee80211_txparam *tp = ni->ni_txparms; /* * EAPOL frames get forced to a fixed rate and w/o * aggregation; otherwise check for any fixed rate * for the client (may depend on association state). */ if (m0->m_flags & M_EAPOL) { const struct mwl_vap *mvp = MWL_VAP_CONST(vap); ds->Format = mvp->mv_eapolformat; ds->pad = htole16( EAGLE_TXD_FIXED_RATE | EAGLE_TXD_DONT_AGGR); } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { /* XXX pre-calculate per node */ ds->Format = htole16( mwl_calcformat(tp->ucastrate, ni)); ds->pad = htole16(EAGLE_TXD_FIXED_RATE); } /* NB: EAPOL frames will never have qos set */ if (qos == 0) ds->TxPriority = txq->qnum; #if MWL_MAXBA > 3 else if (mwl_bastream_match(&mn->mn_ba[3], qos)) ds->TxPriority = mn->mn_ba[3].txq; #endif #if MWL_MAXBA > 2 else if (mwl_bastream_match(&mn->mn_ba[2], qos)) ds->TxPriority = mn->mn_ba[2].txq; #endif #if MWL_MAXBA > 1 else if (mwl_bastream_match(&mn->mn_ba[1], qos)) ds->TxPriority = mn->mn_ba[1].txq; #endif #if MWL_MAXBA > 0 else if (mwl_bastream_match(&mn->mn_ba[0], qos)) ds->TxPriority = mn->mn_ba[0].txq; #endif else ds->TxPriority = txq->qnum; } else ds->TxPriority = txq->qnum; break; default: device_printf(sc->sc_dev, "bogus frame type 0x%x (%s)\n", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK, __func__); sc->sc_stats.mst_tx_badframetype++; m_freem(m0); return EIO; } if (IFF_DUMPPKTS_XMIT(sc)) ieee80211_dump_pkt(ic, mtod(m0, const uint8_t *)+sizeof(uint16_t), m0->m_len - sizeof(uint16_t), ds->DataRate, -1); MWL_TXQ_LOCK(txq); ds->Status = htole32(EAGLE_TXD_STATUS_FW_OWNED); STAILQ_INSERT_TAIL(&txq->active, bf, bf_list); MWL_TXDESC_SYNC(txq, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); sc->sc_tx_timer = 5; MWL_TXQ_UNLOCK(txq); return 0; } static __inline int mwl_cvtlegacyrix(int rix) { static const int ieeerates[] = { 2, 4, 11, 22, 44, 12, 18, 24, 36, 48, 72, 96, 108 }; return (rix < nitems(ieeerates) ? ieeerates[rix] : 0); } /* * Process completed xmit descriptors from the specified queue. */ static int mwl_tx_processq(struct mwl_softc *sc, struct mwl_txq *txq) { #define EAGLE_TXD_STATUS_MCAST \ (EAGLE_TXD_STATUS_MULTICAST_TX | EAGLE_TXD_STATUS_BROADCAST_TX) struct ieee80211com *ic = &sc->sc_ic; struct mwl_txbuf *bf; struct mwl_txdesc *ds; struct ieee80211_node *ni; int nreaped; uint32_t status; DPRINTF(sc, MWL_DEBUG_TX_PROC, "%s: tx queue %u\n", __func__, txq->qnum); for (nreaped = 0;; nreaped++) { MWL_TXQ_LOCK(txq); bf = STAILQ_FIRST(&txq->active); if (bf == NULL) { MWL_TXQ_UNLOCK(txq); break; } ds = bf->bf_desc; MWL_TXDESC_SYNC(txq, ds, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); if (ds->Status & htole32(EAGLE_TXD_STATUS_FW_OWNED)) { MWL_TXQ_UNLOCK(txq); break; } STAILQ_REMOVE_HEAD(&txq->active, bf_list); MWL_TXQ_UNLOCK(txq); #ifdef MWL_DEBUG if (sc->sc_debug & MWL_DEBUG_XMIT_DESC) mwl_printtxbuf(bf, txq->qnum, nreaped); #endif ni = bf->bf_node; if (ni != NULL) { status = le32toh(ds->Status); if (status & EAGLE_TXD_STATUS_OK) { uint16_t Format = le16toh(ds->Format); uint8_t txant = _IEEE80211_MASKSHIFT(Format, EAGLE_TXD_ANTENNA); sc->sc_stats.mst_ant_tx[txant]++; if (status & EAGLE_TXD_STATUS_OK_RETRY) sc->sc_stats.mst_tx_retries++; if (status & EAGLE_TXD_STATUS_OK_MORE_RETRY) sc->sc_stats.mst_tx_mretries++; if (txq->qnum >= MWL_WME_AC_VO) ic->ic_wme.wme_hipri_traffic++; ni->ni_txrate = _IEEE80211_MASKSHIFT(Format, EAGLE_TXD_RATE); if ((Format & EAGLE_TXD_FORMAT_HT) == 0) { ni->ni_txrate = mwl_cvtlegacyrix( ni->ni_txrate); } else ni->ni_txrate |= IEEE80211_RATE_MCS; sc->sc_stats.mst_tx_rate = ni->ni_txrate; } else { if (status & EAGLE_TXD_STATUS_FAILED_LINK_ERROR) sc->sc_stats.mst_tx_linkerror++; if (status & EAGLE_TXD_STATUS_FAILED_XRETRY) sc->sc_stats.mst_tx_xretries++; if (status & EAGLE_TXD_STATUS_FAILED_AGING) sc->sc_stats.mst_tx_aging++; if (bf->bf_m->m_flags & M_FF) sc->sc_stats.mst_ff_txerr++; } if (bf->bf_m->m_flags & M_TXCB) /* XXX strip fw len in case header inspected */ m_adj(bf->bf_m, sizeof(uint16_t)); ieee80211_tx_complete(ni, bf->bf_m, (status & EAGLE_TXD_STATUS_OK) == 0); } else m_freem(bf->bf_m); ds->Status = htole32(EAGLE_TXD_STATUS_IDLE); bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); mwl_puttxbuf_tail(txq, bf); } return nreaped; #undef EAGLE_TXD_STATUS_MCAST } /* * Deferred processing of transmit interrupt; special-cased * for four hardware queues, 0-3. */ static void mwl_tx_proc(void *arg, int npending) { struct mwl_softc *sc = arg; int nreaped; /* * Process each active queue. */ nreaped = 0; if (!STAILQ_EMPTY(&sc->sc_txq[0].active)) nreaped += mwl_tx_processq(sc, &sc->sc_txq[0]); if (!STAILQ_EMPTY(&sc->sc_txq[1].active)) nreaped += mwl_tx_processq(sc, &sc->sc_txq[1]); if (!STAILQ_EMPTY(&sc->sc_txq[2].active)) nreaped += mwl_tx_processq(sc, &sc->sc_txq[2]); if (!STAILQ_EMPTY(&sc->sc_txq[3].active)) nreaped += mwl_tx_processq(sc, &sc->sc_txq[3]); if (nreaped != 0) { sc->sc_tx_timer = 0; if (mbufq_first(&sc->sc_snd) != NULL) { /* NB: kick fw; the tx thread may have been preempted */ mwl_hal_txstart(sc->sc_mh, 0); mwl_start(sc); } } } static void mwl_tx_draintxq(struct mwl_softc *sc, struct mwl_txq *txq) { struct ieee80211_node *ni; struct mwl_txbuf *bf; u_int ix __unused; /* * NB: this assumes output has been stopped and * we do not need to block mwl_tx_tasklet */ for (ix = 0;; ix++) { MWL_TXQ_LOCK(txq); bf = STAILQ_FIRST(&txq->active); if (bf == NULL) { MWL_TXQ_UNLOCK(txq); break; } STAILQ_REMOVE_HEAD(&txq->active, bf_list); MWL_TXQ_UNLOCK(txq); #ifdef MWL_DEBUG if (sc->sc_debug & MWL_DEBUG_RESET) { struct ieee80211com *ic = &sc->sc_ic; const struct mwltxrec *tr = mtod(bf->bf_m, const struct mwltxrec *); mwl_printtxbuf(bf, txq->qnum, ix); ieee80211_dump_pkt(ic, (const uint8_t *)&tr->wh, bf->bf_m->m_len - sizeof(tr->fwlen), 0, -1); } #endif /* MWL_DEBUG */ bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); ni = bf->bf_node; if (ni != NULL) { /* * Reclaim node reference. */ ieee80211_free_node(ni); } m_freem(bf->bf_m); mwl_puttxbuf_tail(txq, bf); } } /* * Drain the transmit queues and reclaim resources. */ static void mwl_draintxq(struct mwl_softc *sc) { int i; for (i = 0; i < MWL_NUM_TX_QUEUES; i++) mwl_tx_draintxq(sc, &sc->sc_txq[i]); sc->sc_tx_timer = 0; } #ifdef MWL_DIAGAPI /* * Reset the transmit queues to a pristine state after a fw download. */ static void mwl_resettxq(struct mwl_softc *sc) { int i; for (i = 0; i < MWL_NUM_TX_QUEUES; i++) mwl_txq_reset(sc, &sc->sc_txq[i]); } #endif /* MWL_DIAGAPI */ /* * Clear the transmit queues of any frames submitted for the * specified vap. This is done when the vap is deleted so we * don't potentially reference the vap after it is gone. * Note we cannot remove the frames; we only reclaim the node * reference. */ static void mwl_cleartxq(struct mwl_softc *sc, struct ieee80211vap *vap) { struct mwl_txq *txq; struct mwl_txbuf *bf; int i; for (i = 0; i < MWL_NUM_TX_QUEUES; i++) { txq = &sc->sc_txq[i]; MWL_TXQ_LOCK(txq); STAILQ_FOREACH(bf, &txq->active, bf_list) { struct ieee80211_node *ni = bf->bf_node; if (ni != NULL && ni->ni_vap == vap) { bf->bf_node = NULL; ieee80211_free_node(ni); } } MWL_TXQ_UNLOCK(txq); } } static int mwl_recv_action(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { struct mwl_softc *sc = ni->ni_ic->ic_softc; const struct ieee80211_action *ia; ia = (const struct ieee80211_action *) frm; if (ia->ia_category == IEEE80211_ACTION_CAT_HT && ia->ia_action == IEEE80211_ACTION_HT_MIMOPWRSAVE) { const struct ieee80211_action_ht_mimopowersave *mps = (const struct ieee80211_action_ht_mimopowersave *) ia; mwl_hal_setmimops(sc->sc_mh, ni->ni_macaddr, mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA, _IEEE80211_MASKSHIFT(mps->am_control, IEEE80211_A_HT_MIMOPWRSAVE_MODE)); return 0; } else return sc->sc_recv_action(ni, wh, frm, efrm); } static int mwl_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int dialogtoken, int baparamset, int batimeout) { struct mwl_softc *sc = ni->ni_ic->ic_softc; struct ieee80211vap *vap = ni->ni_vap; struct mwl_node *mn = MWL_NODE(ni); struct mwl_bastate *bas; bas = tap->txa_private; if (bas == NULL) { const MWL_HAL_BASTREAM *sp; /* * Check for a free BA stream slot. */ #if MWL_MAXBA > 3 if (mn->mn_ba[3].bastream == NULL) bas = &mn->mn_ba[3]; else #endif #if MWL_MAXBA > 2 if (mn->mn_ba[2].bastream == NULL) bas = &mn->mn_ba[2]; else #endif #if MWL_MAXBA > 1 if (mn->mn_ba[1].bastream == NULL) bas = &mn->mn_ba[1]; else #endif #if MWL_MAXBA > 0 if (mn->mn_ba[0].bastream == NULL) bas = &mn->mn_ba[0]; else #endif { /* sta already has max BA streams */ /* XXX assign BA stream to highest priority tid */ DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: already has max bastreams\n", __func__); sc->sc_stats.mst_ampdu_reject++; return 0; } /* NB: no held reference to ni */ sp = mwl_hal_bastream_alloc(MWL_VAP(vap)->mv_hvap, (baparamset & IEEE80211_BAPS_POLICY_IMMEDIATE) != 0, ni->ni_macaddr, tap->txa_tid, ni->ni_htparam, ni, tap); if (sp == NULL) { /* * No available stream, return 0 so no * a-mpdu aggregation will be done. */ DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: no bastream available\n", __func__); sc->sc_stats.mst_ampdu_nostream++; return 0; } DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: alloc bastream %p\n", __func__, sp); /* NB: qos is left zero so we won't match in mwl_tx_start */ bas->bastream = sp; tap->txa_private = bas; } /* fetch current seq# from the firmware; if available */ if (mwl_hal_bastream_get_seqno(sc->sc_mh, bas->bastream, vap->iv_opmode == IEEE80211_M_STA ? vap->iv_myaddr : ni->ni_macaddr, &tap->txa_start) != 0) tap->txa_start = 0; return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, batimeout); } static int mwl_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int code, int baparamset, int batimeout) { struct mwl_softc *sc = ni->ni_ic->ic_softc; struct mwl_bastate *bas; bas = tap->txa_private; if (bas == NULL) { /* XXX should not happen */ DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: no BA stream allocated, TID %d\n", __func__, tap->txa_tid); sc->sc_stats.mst_addba_nostream++; return 0; } if (code == IEEE80211_STATUS_SUCCESS) { struct ieee80211vap *vap = ni->ni_vap; int bufsiz, error; /* * Tell the firmware to setup the BA stream; * we know resources are available because we * pre-allocated one before forming the request. */ bufsiz = _IEEE80211_MASKSHIFT(baparamset, IEEE80211_BAPS_BUFSIZ); if (bufsiz == 0) bufsiz = IEEE80211_AGGR_BAWMAX; error = mwl_hal_bastream_create(MWL_VAP(vap)->mv_hvap, bas->bastream, bufsiz, bufsiz, tap->txa_start); if (error != 0) { /* * Setup failed, return immediately so no a-mpdu * aggregation will be done. */ mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream); mwl_bastream_free(bas); tap->txa_private = NULL; DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: create failed, error %d, bufsiz %d TID %d " "htparam 0x%x\n", __func__, error, bufsiz, tap->txa_tid, ni->ni_htparam); sc->sc_stats.mst_bacreate_failed++; return 0; } /* NB: cache txq to avoid ptr indirect */ mwl_bastream_setup(bas, tap->txa_tid, bas->bastream->txq); DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: bastream %p assigned to txq %d TID %d bufsiz %d " "htparam 0x%x\n", __func__, bas->bastream, bas->txq, tap->txa_tid, bufsiz, ni->ni_htparam); } else { /* * Other side NAK'd us; return the resources. */ DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: request failed with code %d, destroy bastream %p\n", __func__, code, bas->bastream); mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream); mwl_bastream_free(bas); tap->txa_private = NULL; } /* NB: firmware sends BAR so we don't need to */ return sc->sc_addba_response(ni, tap, code, baparamset, batimeout); } static void mwl_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { struct mwl_softc *sc = ni->ni_ic->ic_softc; struct mwl_bastate *bas; bas = tap->txa_private; if (bas != NULL) { DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: destroy bastream %p\n", __func__, bas->bastream); mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream); mwl_bastream_free(bas); tap->txa_private = NULL; } sc->sc_addba_stop(ni, tap); } /* * Setup the rx data structures. This should only be * done once or we may get out of sync with the firmware. */ static int mwl_startrecv(struct mwl_softc *sc) { if (!sc->sc_recvsetup) { struct mwl_rxbuf *bf, *prev; struct mwl_rxdesc *ds; prev = NULL; STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { int error = mwl_rxbuf_init(sc, bf); if (error != 0) { DPRINTF(sc, MWL_DEBUG_RECV, "%s: mwl_rxbuf_init failed %d\n", __func__, error); return error; } if (prev != NULL) { ds = prev->bf_desc; ds->pPhysNext = htole32(bf->bf_daddr); } prev = bf; } if (prev != NULL) { ds = prev->bf_desc; ds->pPhysNext = htole32(STAILQ_FIRST(&sc->sc_rxbuf)->bf_daddr); } sc->sc_recvsetup = 1; } mwl_mode_init(sc); /* set filters, etc. */ return 0; } static MWL_HAL_APMODE mwl_getapmode(const struct ieee80211vap *vap, struct ieee80211_channel *chan) { MWL_HAL_APMODE mode; if (IEEE80211_IS_CHAN_HT(chan)) { if (vap->iv_flags_ht & IEEE80211_FHT_PUREN) mode = AP_MODE_N_ONLY; else if (IEEE80211_IS_CHAN_5GHZ(chan)) mode = AP_MODE_AandN; else if (vap->iv_flags & IEEE80211_F_PUREG) mode = AP_MODE_GandN; else mode = AP_MODE_BandGandN; } else if (IEEE80211_IS_CHAN_ANYG(chan)) { if (vap->iv_flags & IEEE80211_F_PUREG) mode = AP_MODE_G_ONLY; else mode = AP_MODE_MIXED; } else if (IEEE80211_IS_CHAN_B(chan)) mode = AP_MODE_B_ONLY; else if (IEEE80211_IS_CHAN_A(chan)) mode = AP_MODE_A_ONLY; else mode = AP_MODE_MIXED; /* XXX should not happen? */ return mode; } static int mwl_setapmode(struct ieee80211vap *vap, struct ieee80211_channel *chan) { struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; return mwl_hal_setapmode(hvap, mwl_getapmode(vap, chan)); } /* * Set/change channels. */ static int mwl_chan_set(struct mwl_softc *sc, struct ieee80211_channel *chan) { struct mwl_hal *mh = sc->sc_mh; struct ieee80211com *ic = &sc->sc_ic; MWL_HAL_CHANNEL hchan; int maxtxpow; DPRINTF(sc, MWL_DEBUG_RESET, "%s: chan %u MHz/flags 0x%x\n", __func__, chan->ic_freq, chan->ic_flags); /* * Convert to a HAL channel description with * the flags constrained to reflect the current * operating mode. */ mwl_mapchan(&hchan, chan); mwl_hal_intrset(mh, 0); /* disable interrupts */ #if 0 mwl_draintxq(sc); /* clear pending tx frames */ #endif mwl_hal_setchannel(mh, &hchan); /* * Tx power is cap'd by the regulatory setting and * possibly a user-set limit. We pass the min of * these to the hal to apply them to the cal data * for this channel. * XXX min bound? */ maxtxpow = 2*chan->ic_maxregpower; if (maxtxpow > ic->ic_txpowlimit) maxtxpow = ic->ic_txpowlimit; mwl_hal_settxpower(mh, &hchan, maxtxpow / 2); /* NB: potentially change mcast/mgt rates */ mwl_setcurchanrates(sc); /* * Update internal state. */ sc->sc_tx_th.wt_chan_freq = htole16(chan->ic_freq); sc->sc_rx_th.wr_chan_freq = htole16(chan->ic_freq); if (IEEE80211_IS_CHAN_A(chan)) { sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_A); sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_A); } else if (IEEE80211_IS_CHAN_ANYG(chan)) { sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_G); sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_G); } else { sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_B); sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_B); } sc->sc_curchan = hchan; mwl_hal_intrset(mh, sc->sc_imask); return 0; } static void mwl_scan_start(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__); } static void mwl_scan_end(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__); } static void mwl_set_channel(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; (void) mwl_chan_set(sc, ic->ic_curchan); } /* * Handle a channel switch request. We inform the firmware * and mark the global state to suppress various actions. * NB: we issue only one request to the fw; we may be called * multiple times if there are multiple vap's. */ static void mwl_startcsa(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct mwl_softc *sc = ic->ic_softc; MWL_HAL_CHANNEL hchan; if (sc->sc_csapending) return; mwl_mapchan(&hchan, ic->ic_csa_newchan); /* 1 =>'s quiet channel */ mwl_hal_setchannelswitchie(sc->sc_mh, &hchan, 1, ic->ic_csa_count); sc->sc_csapending = 1; } /* * Plumb any static WEP key for the station. This is * necessary as we must propagate the key from the * global key table of the vap to each sta db entry. */ static void mwl_setanywepkey(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) { if ((vap->iv_flags & (IEEE80211_F_PRIVACY|IEEE80211_F_WPA)) == IEEE80211_F_PRIVACY && vap->iv_def_txkey != IEEE80211_KEYIX_NONE && vap->iv_nw_keys[vap->iv_def_txkey].wk_keyix != IEEE80211_KEYIX_NONE) (void) _mwl_key_set(vap, &vap->iv_nw_keys[vap->iv_def_txkey], mac); } static int mwl_peerstadb(struct ieee80211_node *ni, int aid, int staid, MWL_HAL_PEERINFO *pi) { #define WME(ie) ((const struct ieee80211_wme_info *) ie) struct ieee80211vap *vap = ni->ni_vap; struct mwl_hal_vap *hvap; int error; if (vap->iv_opmode == IEEE80211_M_WDS) { /* * WDS vap's do not have a f/w vap; instead they piggyback * on an AP vap and we must install the sta db entry and * crypto state using that AP's handle (the WDS vap has none). */ hvap = MWL_VAP(vap)->mv_ap_hvap; } else hvap = MWL_VAP(vap)->mv_hvap; error = mwl_hal_newstation(hvap, ni->ni_macaddr, aid, staid, pi, ni->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT), ni->ni_ies.wme_ie != NULL ? WME(ni->ni_ies.wme_ie)->wme_info : 0); if (error == 0) { /* * Setup security for this station. For sta mode this is * needed even though do the same thing on transition to * AUTH state because the call to mwl_hal_newstation * clobbers the crypto state we setup. */ mwl_setanywepkey(vap, ni->ni_macaddr); } return error; #undef WME } static void mwl_setglobalkeys(struct ieee80211vap *vap) { struct ieee80211_key *wk; wk = &vap->iv_nw_keys[0]; for (; wk < &vap->iv_nw_keys[IEEE80211_WEP_NKID]; wk++) if (wk->wk_keyix != IEEE80211_KEYIX_NONE) (void) _mwl_key_set(vap, wk, vap->iv_myaddr); } /* * Convert a legacy rate set to a firmware bitmask. */ static uint32_t get_rate_bitmap(const struct ieee80211_rateset *rs) { uint32_t rates; int i; rates = 0; for (i = 0; i < rs->rs_nrates; i++) switch (rs->rs_rates[i] & IEEE80211_RATE_VAL) { case 2: rates |= 0x001; break; case 4: rates |= 0x002; break; case 11: rates |= 0x004; break; case 22: rates |= 0x008; break; case 44: rates |= 0x010; break; case 12: rates |= 0x020; break; case 18: rates |= 0x040; break; case 24: rates |= 0x080; break; case 36: rates |= 0x100; break; case 48: rates |= 0x200; break; case 72: rates |= 0x400; break; case 96: rates |= 0x800; break; case 108: rates |= 0x1000; break; } return rates; } /* * Construct an HT firmware bitmask from an HT rate set. */ static uint32_t get_htrate_bitmap(const struct ieee80211_htrateset *rs) { uint32_t rates; int i; rates = 0; for (i = 0; i < rs->rs_nrates; i++) { if (rs->rs_rates[i] < 16) rates |= 1<rs_rates[i]; } return rates; } /* * Craft station database entry for station. * NB: use host byte order here, the hal handles byte swapping. */ static MWL_HAL_PEERINFO * mkpeerinfo(MWL_HAL_PEERINFO *pi, const struct ieee80211_node *ni) { const struct ieee80211vap *vap = ni->ni_vap; memset(pi, 0, sizeof(*pi)); pi->LegacyRateBitMap = get_rate_bitmap(&ni->ni_rates); pi->CapInfo = ni->ni_capinfo; if (ni->ni_flags & IEEE80211_NODE_HT) { /* HT capabilities, etc */ pi->HTCapabilitiesInfo = ni->ni_htcap; /* XXX pi.HTCapabilitiesInfo */ pi->MacHTParamInfo = ni->ni_htparam; pi->HTRateBitMap = get_htrate_bitmap(&ni->ni_htrates); pi->AddHtInfo.ControlChan = ni->ni_htctlchan; pi->AddHtInfo.AddChan = ni->ni_ht2ndchan; pi->AddHtInfo.OpMode = ni->ni_htopmode; pi->AddHtInfo.stbc = ni->ni_htstbc; /* constrain according to local configuration */ if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) == 0) pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI40; if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) == 0) pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI20; if (ni->ni_chw != 40) pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_CHWIDTH40; } return pi; } /* * Re-create the local sta db entry for a vap to ensure * up to date WME state is pushed to the firmware. Because * this resets crypto state this must be followed by a * reload of any keys in the global key table. */ static int mwl_localstadb(struct ieee80211vap *vap) { #define WME(ie) ((const struct ieee80211_wme_info *) ie) struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap; struct ieee80211_node *bss; MWL_HAL_PEERINFO pi; int error; switch (vap->iv_opmode) { case IEEE80211_M_STA: bss = vap->iv_bss; error = mwl_hal_newstation(hvap, vap->iv_myaddr, 0, 0, vap->iv_state == IEEE80211_S_RUN ? mkpeerinfo(&pi, bss) : NULL, (bss->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT)), bss->ni_ies.wme_ie != NULL ? WME(bss->ni_ies.wme_ie)->wme_info : 0); if (error == 0) mwl_setglobalkeys(vap); break; case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: error = mwl_hal_newstation(hvap, vap->iv_myaddr, 0, 0, NULL, vap->iv_flags & IEEE80211_F_WME, 0); if (error == 0) mwl_setglobalkeys(vap); break; default: error = 0; break; } return error; #undef WME } static int mwl_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct mwl_vap *mvp = MWL_VAP(vap); struct mwl_hal_vap *hvap = mvp->mv_hvap; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni = NULL; struct mwl_softc *sc = ic->ic_softc; struct mwl_hal *mh = sc->sc_mh; enum ieee80211_state ostate = vap->iv_state; int error; DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: %s -> %s\n", if_name(vap->iv_ifp), __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); callout_stop(&sc->sc_timer); /* * Clear current radar detection state. */ if (ostate == IEEE80211_S_CAC) { /* stop quiet mode radar detection */ mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_STOP); } else if (sc->sc_radarena) { /* stop in-service radar detection */ mwl_hal_setradardetection(mh, DR_DFS_DISABLE); sc->sc_radarena = 0; } /* * Carry out per-state actions before doing net80211 work. */ if (nstate == IEEE80211_S_INIT) { /* NB: only ap+sta vap's have a fw entity */ if (hvap != NULL) mwl_hal_stop(hvap); } else if (nstate == IEEE80211_S_SCAN) { mwl_hal_start(hvap); /* NB: this disables beacon frames */ mwl_hal_setinframode(hvap); } else if (nstate == IEEE80211_S_AUTH) { /* * Must create a sta db entry in case a WEP key needs to * be plumbed. This entry will be overwritten if we * associate; otherwise it will be reclaimed on node free. */ ni = vap->iv_bss; MWL_NODE(ni)->mn_hvap = hvap; (void) mwl_peerstadb(ni, 0, 0, NULL); } else if (nstate == IEEE80211_S_CSA) { /* XXX move to below? */ if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) mwl_startcsa(vap); } else if (nstate == IEEE80211_S_CAC) { /* XXX move to below? */ /* stop ap xmit and enable quiet mode radar detection */ mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_START); } /* * Invoke the parent method to do net80211 work. */ error = mvp->mv_newstate(vap, nstate, arg); /* * Carry out work that must be done after net80211 runs; * this work requires up to date state (e.g. iv_bss). */ if (error == 0 && nstate == IEEE80211_S_RUN) { /* NB: collect bss node again, it may have changed */ ni = vap->iv_bss; DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s(RUN): iv_flags 0x%08x bintvl %d bssid %s " "capinfo 0x%04x chan %d\n", if_name(vap->iv_ifp), __func__, vap->iv_flags, ni->ni_intval, ether_sprintf(ni->ni_bssid), ni->ni_capinfo, ieee80211_chan2ieee(ic, ic->ic_curchan)); /* * Recreate local sta db entry to update WME/HT state. */ mwl_localstadb(vap); switch (vap->iv_opmode) { case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: if (ostate == IEEE80211_S_CAC) { /* enable in-service radar detection */ mwl_hal_setradardetection(mh, DR_IN_SERVICE_MONITOR_START); sc->sc_radarena = 1; } /* * Allocate and setup the beacon frame * (and related state). */ error = mwl_reset_vap(vap, IEEE80211_S_RUN); if (error != 0) { DPRINTF(sc, MWL_DEBUG_STATE, "%s: beacon setup failed, error %d\n", __func__, error); goto bad; } /* NB: must be after setting up beacon */ mwl_hal_start(hvap); break; case IEEE80211_M_STA: DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: aid 0x%x\n", if_name(vap->iv_ifp), __func__, ni->ni_associd); /* * Set state now that we're associated. */ mwl_hal_setassocid(hvap, ni->ni_bssid, ni->ni_associd); mwl_setrates(vap); mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold); if ((vap->iv_flags & IEEE80211_F_DWDS) && sc->sc_ndwdsvaps++ == 0) mwl_hal_setdwds(mh, 1); break; case IEEE80211_M_WDS: DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: bssid %s\n", if_name(vap->iv_ifp), __func__, ether_sprintf(ni->ni_bssid)); mwl_seteapolformat(vap); break; default: break; } /* * Set CS mode according to operating channel; * this mostly an optimization for 5GHz. * * NB: must follow mwl_hal_start which resets csmode */ if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) mwl_hal_setcsmode(mh, CSMODE_AGGRESSIVE); else mwl_hal_setcsmode(mh, CSMODE_AUTO_ENA); /* * Start timer to prod firmware. */ if (sc->sc_ageinterval != 0) callout_reset(&sc->sc_timer, sc->sc_ageinterval*hz, mwl_agestations, sc); } else if (nstate == IEEE80211_S_SLEEP) { /* XXX set chip in power save */ } else if ((vap->iv_flags & IEEE80211_F_DWDS) && --sc->sc_ndwdsvaps == 0) mwl_hal_setdwds(mh, 0); bad: return error; } /* * Manage station id's; these are separate from AID's * as AID's may have values out of the range of possible * station id's acceptable to the firmware. */ static int allocstaid(struct mwl_softc *sc, int aid) { int staid; if (!(0 < aid && aid < MWL_MAXSTAID) || isset(sc->sc_staid, aid)) { /* NB: don't use 0 */ for (staid = 1; staid < MWL_MAXSTAID; staid++) if (isclr(sc->sc_staid, staid)) break; } else staid = aid; setbit(sc->sc_staid, staid); return staid; } static void delstaid(struct mwl_softc *sc, int staid) { clrbit(sc->sc_staid, staid); } /* * Setup driver-specific state for a newly associated node. * Note that we're called also on a re-associate, the isnew * param tells us if this is the first time or not. */ static void mwl_newassoc(struct ieee80211_node *ni, int isnew) { struct ieee80211vap *vap = ni->ni_vap; struct mwl_softc *sc = vap->iv_ic->ic_softc; struct mwl_node *mn = MWL_NODE(ni); MWL_HAL_PEERINFO pi; uint16_t aid; int error; aid = IEEE80211_AID(ni->ni_associd); if (isnew) { mn->mn_staid = allocstaid(sc, aid); mn->mn_hvap = MWL_VAP(vap)->mv_hvap; } else { mn = MWL_NODE(ni); /* XXX reset BA stream? */ } DPRINTF(sc, MWL_DEBUG_NODE, "%s: mac %s isnew %d aid %d staid %d\n", __func__, ether_sprintf(ni->ni_macaddr), isnew, aid, mn->mn_staid); error = mwl_peerstadb(ni, aid, mn->mn_staid, mkpeerinfo(&pi, ni)); if (error != 0) { DPRINTF(sc, MWL_DEBUG_NODE, "%s: error %d creating sta db entry\n", __func__, error); /* XXX how to deal with error? */ } } /* * Periodically poke the firmware to age out station state * (power save queues, pending tx aggregates). */ static void mwl_agestations(void *arg) { struct mwl_softc *sc = arg; mwl_hal_setkeepalive(sc->sc_mh); if (sc->sc_ageinterval != 0) /* NB: catch dynamic changes */ callout_schedule(&sc->sc_timer, sc->sc_ageinterval*hz); } static const struct mwl_hal_channel * findhalchannel(const MWL_HAL_CHANNELINFO *ci, int ieee) { int i; for (i = 0; i < ci->nchannels; i++) { const struct mwl_hal_channel *hc = &ci->channels[i]; if (hc->ieee == ieee) return hc; } return NULL; } static int mwl_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, int nchan, struct ieee80211_channel chans[]) { struct mwl_softc *sc = ic->ic_softc; struct mwl_hal *mh = sc->sc_mh; const MWL_HAL_CHANNELINFO *ci; int i; for (i = 0; i < nchan; i++) { struct ieee80211_channel *c = &chans[i]; const struct mwl_hal_channel *hc; if (IEEE80211_IS_CHAN_2GHZ(c)) { mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_2DOT4GHZ, IEEE80211_IS_CHAN_HT40(c) ? MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci); } else if (IEEE80211_IS_CHAN_5GHZ(c)) { mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_5GHZ, IEEE80211_IS_CHAN_HT40(c) ? MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci); } else { device_printf(sc->sc_dev, "%s: channel %u freq %u/0x%x not 2.4/5GHz\n", __func__, c->ic_ieee, c->ic_freq, c->ic_flags); return EINVAL; } /* * Verify channel has cal data and cap tx power. */ hc = findhalchannel(ci, c->ic_ieee); if (hc != NULL) { if (c->ic_maxpower > 2*hc->maxTxPow) c->ic_maxpower = 2*hc->maxTxPow; goto next; } if (IEEE80211_IS_CHAN_HT40(c)) { /* * Look for the extension channel since the * hal table only has the primary channel. */ hc = findhalchannel(ci, c->ic_extieee); if (hc != NULL) { if (c->ic_maxpower > 2*hc->maxTxPow) c->ic_maxpower = 2*hc->maxTxPow; goto next; } } device_printf(sc->sc_dev, "%s: no cal data for channel %u ext %u freq %u/0x%x\n", __func__, c->ic_ieee, c->ic_extieee, c->ic_freq, c->ic_flags); return EINVAL; next: ; } return 0; } #define IEEE80211_CHAN_HTG (IEEE80211_CHAN_HT|IEEE80211_CHAN_G) #define IEEE80211_CHAN_HTA (IEEE80211_CHAN_HT|IEEE80211_CHAN_A) static void addht40channels(struct ieee80211_channel chans[], int maxchans, int *nchans, const MWL_HAL_CHANNELINFO *ci, int flags) { int i, error; for (i = 0; i < ci->nchannels; i++) { const struct mwl_hal_channel *hc = &ci->channels[i]; error = ieee80211_add_channel_ht40(chans, maxchans, nchans, hc->ieee, hc->maxTxPow, flags); if (error != 0 && error != ENOENT) break; } } static void addchannels(struct ieee80211_channel chans[], int maxchans, int *nchans, const MWL_HAL_CHANNELINFO *ci, const uint8_t bands[]) { int i, error; error = 0; for (i = 0; i < ci->nchannels && error == 0; i++) { const struct mwl_hal_channel *hc = &ci->channels[i]; error = ieee80211_add_channel(chans, maxchans, nchans, hc->ieee, hc->freq, hc->maxTxPow, 0, bands); } } static void getchannels(struct mwl_softc *sc, int maxchans, int *nchans, struct ieee80211_channel chans[]) { const MWL_HAL_CHANNELINFO *ci; uint8_t bands[IEEE80211_MODE_BYTES]; /* * Use the channel info from the hal to craft the * channel list. Note that we pass back an unsorted * list; the caller is required to sort it for us * (if desired). */ *nchans = 0; if (mwl_hal_getchannelinfo(sc->sc_mh, MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) { memset(bands, 0, sizeof(bands)); setbit(bands, IEEE80211_MODE_11B); setbit(bands, IEEE80211_MODE_11G); setbit(bands, IEEE80211_MODE_11NG); addchannels(chans, maxchans, nchans, ci, bands); } if (mwl_hal_getchannelinfo(sc->sc_mh, MWL_FREQ_BAND_5GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) { memset(bands, 0, sizeof(bands)); setbit(bands, IEEE80211_MODE_11A); setbit(bands, IEEE80211_MODE_11NA); addchannels(chans, maxchans, nchans, ci, bands); } if (mwl_hal_getchannelinfo(sc->sc_mh, MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0) addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTG); if (mwl_hal_getchannelinfo(sc->sc_mh, MWL_FREQ_BAND_5GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0) addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTA); } static void mwl_getradiocaps(struct ieee80211com *ic, int maxchans, int *nchans, struct ieee80211_channel chans[]) { struct mwl_softc *sc = ic->ic_softc; getchannels(sc, maxchans, nchans, chans); } static int mwl_getchannels(struct mwl_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; /* * Use the channel info from the hal to craft the * channel list for net80211. Note that we pass up * an unsorted list; net80211 will sort it for us. */ memset(ic->ic_channels, 0, sizeof(ic->ic_channels)); ic->ic_nchans = 0; getchannels(sc, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels); ic->ic_regdomain.regdomain = SKU_DEBUG; ic->ic_regdomain.country = CTRY_DEFAULT; ic->ic_regdomain.location = 'I'; ic->ic_regdomain.isocc[0] = ' '; /* XXX? */ ic->ic_regdomain.isocc[1] = ' '; return (ic->ic_nchans == 0 ? EIO : 0); } #undef IEEE80211_CHAN_HTA #undef IEEE80211_CHAN_HTG #ifdef MWL_DEBUG static void mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix) { const struct mwl_rxdesc *ds = bf->bf_desc; uint32_t status = le32toh(ds->Status); printf("R[%2u] (DS.V:%p DS.P:0x%jx) NEXT:%08x DATA:%08x RC:%02x%s\n" " STAT:%02x LEN:%04x RSSI:%02x CHAN:%02x RATE:%02x QOS:%04x HT:%04x\n", ix, ds, (uintmax_t)bf->bf_daddr, le32toh(ds->pPhysNext), le32toh(ds->pPhysBuffData), ds->RxControl, ds->RxControl != EAGLE_RXD_CTRL_DRIVER_OWN ? "" : (status & EAGLE_RXD_STATUS_OK) ? " *" : " !", ds->Status, le16toh(ds->PktLen), ds->RSSI, ds->Channel, ds->Rate, le16toh(ds->QosCtrl), le16toh(ds->HtSig2)); } static void mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix) { const struct mwl_txdesc *ds = bf->bf_desc; uint32_t status = le32toh(ds->Status); printf("Q%u[%3u]", qnum, ix); printf(" (DS.V:%p DS.P:0x%jx)\n", ds, (uintmax_t)bf->bf_daddr); printf(" NEXT:%08x DATA:%08x LEN:%04x STAT:%08x%s\n", le32toh(ds->pPhysNext), le32toh(ds->PktPtr), le16toh(ds->PktLen), status, status & EAGLE_TXD_STATUS_USED ? "" : (status & 3) != 0 ? " *" : " !"); printf(" RATE:%02x PRI:%x QOS:%04x SAP:%08x FORMAT:%04x\n", ds->DataRate, ds->TxPriority, le16toh(ds->QosCtrl), le32toh(ds->SapPktInfo), le16toh(ds->Format)); #if MWL_TXDESC > 1 printf(" MULTIFRAMES:%u LEN:%04x %04x %04x %04x %04x %04x\n" , le32toh(ds->multiframes) , le16toh(ds->PktLenArray[0]), le16toh(ds->PktLenArray[1]) , le16toh(ds->PktLenArray[2]), le16toh(ds->PktLenArray[3]) , le16toh(ds->PktLenArray[4]), le16toh(ds->PktLenArray[5]) ); printf(" DATA:%08x %08x %08x %08x %08x %08x\n" , le32toh(ds->PktPtrArray[0]), le32toh(ds->PktPtrArray[1]) , le32toh(ds->PktPtrArray[2]), le32toh(ds->PktPtrArray[3]) , le32toh(ds->PktPtrArray[4]), le32toh(ds->PktPtrArray[5]) ); #endif #if 0 { const uint8_t *cp = (const uint8_t *) ds; int i; for (i = 0; i < sizeof(struct mwl_txdesc); i++) { printf("%02x ", cp[i]); if (((i+1) % 16) == 0) printf("\n"); } printf("\n"); } #endif } #endif /* MWL_DEBUG */ #if 0 static void mwl_txq_dump(struct mwl_txq *txq) { struct mwl_txbuf *bf; int i = 0; MWL_TXQ_LOCK(txq); STAILQ_FOREACH(bf, &txq->active, bf_list) { struct mwl_txdesc *ds = bf->bf_desc; MWL_TXDESC_SYNC(txq, ds, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); #ifdef MWL_DEBUG mwl_printtxbuf(bf, txq->qnum, i); #endif i++; } MWL_TXQ_UNLOCK(txq); } #endif static void mwl_watchdog(void *arg) { struct mwl_softc *sc = arg; callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc); if (sc->sc_tx_timer == 0 || --sc->sc_tx_timer > 0) return; if (sc->sc_running && !sc->sc_invalid) { if (mwl_hal_setkeepalive(sc->sc_mh)) device_printf(sc->sc_dev, "transmit timeout (firmware hung?)\n"); else device_printf(sc->sc_dev, "transmit timeout\n"); #if 0 mwl_reset(sc); mwl_txq_dump(&sc->sc_txq[0]);/*XXX*/ #endif counter_u64_add(sc->sc_ic.ic_oerrors, 1); sc->sc_stats.mst_watchdog++; } } #ifdef MWL_DIAGAPI /* * Diagnostic interface to the HAL. This is used by various * tools to do things like retrieve register contents for * debugging. The mechanism is intentionally opaque so that * it can change frequently w/o concern for compatibility. */ static int mwl_ioctl_diag(struct mwl_softc *sc, struct mwl_diag *md) { struct mwl_hal *mh = sc->sc_mh; u_int id = md->md_id & MWL_DIAG_ID; void *indata = NULL; void *outdata = NULL; u_int32_t insize = md->md_in_size; u_int32_t outsize = md->md_out_size; int error = 0; if (md->md_id & MWL_DIAG_IN) { /* * Copy in data. */ indata = malloc(insize, M_TEMP, M_NOWAIT); if (indata == NULL) { error = ENOMEM; goto bad; } error = copyin(md->md_in_data, indata, insize); if (error) goto bad; } if (md->md_id & MWL_DIAG_DYN) { /* * Allocate a buffer for the results (otherwise the HAL * returns a pointer to a buffer where we can read the * results). Note that we depend on the HAL leaving this * pointer for us to use below in reclaiming the buffer; * may want to be more defensive. */ outdata = malloc(outsize, M_TEMP, M_NOWAIT); if (outdata == NULL) { error = ENOMEM; goto bad; } } if (mwl_hal_getdiagstate(mh, id, indata, insize, &outdata, &outsize)) { if (outsize < md->md_out_size) md->md_out_size = outsize; if (outdata != NULL) error = copyout(outdata, md->md_out_data, md->md_out_size); } else { error = EINVAL; } bad: if ((md->md_id & MWL_DIAG_IN) && indata != NULL) free(indata, M_TEMP); if ((md->md_id & MWL_DIAG_DYN) && outdata != NULL) free(outdata, M_TEMP); return error; } static int mwl_ioctl_reset(struct mwl_softc *sc, struct mwl_diag *md) { struct mwl_hal *mh = sc->sc_mh; int error; MWL_LOCK_ASSERT(sc); if (md->md_id == 0 && mwl_hal_fwload(mh, NULL) != 0) { device_printf(sc->sc_dev, "unable to load firmware\n"); return EIO; } if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) { device_printf(sc->sc_dev, "unable to fetch h/w specs\n"); return EIO; } error = mwl_setupdma(sc); if (error != 0) { /* NB: mwl_setupdma prints a msg */ return error; } /* * Reset tx/rx data structures; after reload we must * re-start the driver's notion of the next xmit/recv. */ mwl_draintxq(sc); /* clear pending frames */ mwl_resettxq(sc); /* rebuild tx q lists */ sc->sc_rxnext = NULL; /* force rx to start at the list head */ return 0; } #endif /* MWL_DIAGAPI */ static void mwl_parent(struct ieee80211com *ic) { struct mwl_softc *sc = ic->ic_softc; int startall = 0; MWL_LOCK(sc); if (ic->ic_nrunning > 0) { if (sc->sc_running) { /* * To avoid rescanning another access point, * do not call mwl_init() here. Instead, * only reflect promisc mode settings. */ mwl_mode_init(sc); } else { /* * Beware of being called during attach/detach * to reset promiscuous mode. In that case we * will still be marked UP but not RUNNING. * However trying to re-init the interface * is the wrong thing to do as we've already * torn down much of our state. There's * probably a better way to deal with this. */ if (!sc->sc_invalid) { mwl_init(sc); /* XXX lose error */ startall = 1; } } } else mwl_stop(sc); MWL_UNLOCK(sc); if (startall) ieee80211_start_all(ic); } static int mwl_ioctl(struct ieee80211com *ic, u_long cmd, void *data) { struct mwl_softc *sc = ic->ic_softc; struct ifreq *ifr = data; int error = 0; switch (cmd) { case SIOCGMVSTATS: mwl_hal_gethwstats(sc->sc_mh, &sc->sc_stats.hw_stats); #if 0 /* NB: embed these numbers to get a consistent view */ sc->sc_stats.mst_tx_packets = if_get_counter(ifp, IFCOUNTER_OPACKETS); sc->sc_stats.mst_rx_packets = if_get_counter(ifp, IFCOUNTER_IPACKETS); #endif /* * NB: Drop the softc lock in case of a page fault; * we'll accept any potential inconsisentcy in the * statistics. The alternative is to copy the data * to a local structure. */ return (copyout(&sc->sc_stats, ifr_data_get_ptr(ifr), sizeof (sc->sc_stats))); #ifdef MWL_DIAGAPI case SIOCGMVDIAG: /* XXX check privs */ return mwl_ioctl_diag(sc, (struct mwl_diag *) ifr); case SIOCGMVRESET: /* XXX check privs */ MWL_LOCK(sc); error = mwl_ioctl_reset(sc,(struct mwl_diag *) ifr); MWL_UNLOCK(sc); break; #endif /* MWL_DIAGAPI */ default: error = ENOTTY; break; } return (error); } #ifdef MWL_DEBUG static int mwl_sysctl_debug(SYSCTL_HANDLER_ARGS) { struct mwl_softc *sc = arg1; int debug, error; debug = sc->sc_debug | (mwl_hal_getdebug(sc->sc_mh) << 24); error = sysctl_handle_int(oidp, &debug, 0, req); if (error || !req->newptr) return error; mwl_hal_setdebug(sc->sc_mh, debug >> 24); sc->sc_debug = debug & 0x00ffffff; return 0; } #endif /* MWL_DEBUG */ static void mwl_sysctlattach(struct mwl_softc *sc) { #ifdef MWL_DEBUG struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); sc->sc_debug = mwl_debug; SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0, mwl_sysctl_debug, "I", "control debugging printfs"); #endif } /* * Announce various information on device/driver attach. */ static void mwl_announce(struct mwl_softc *sc) { device_printf(sc->sc_dev, "Rev A%d hardware, v%d.%d.%d.%d firmware (regioncode %d)\n", sc->sc_hwspecs.hwVersion, (sc->sc_hwspecs.fwReleaseNumber>>24) & 0xff, (sc->sc_hwspecs.fwReleaseNumber>>16) & 0xff, (sc->sc_hwspecs.fwReleaseNumber>>8) & 0xff, (sc->sc_hwspecs.fwReleaseNumber>>0) & 0xff, sc->sc_hwspecs.regionCode); sc->sc_fwrelease = sc->sc_hwspecs.fwReleaseNumber; if (bootverbose) { int i; for (i = 0; i <= WME_AC_VO; i++) { struct mwl_txq *txq = sc->sc_ac2q[i]; device_printf(sc->sc_dev, "Use hw queue %u for %s traffic\n", txq->qnum, ieee80211_wme_acnames[i]); } } if (bootverbose || mwl_rxdesc != MWL_RXDESC) device_printf(sc->sc_dev, "using %u rx descriptors\n", mwl_rxdesc); if (bootverbose || mwl_rxbuf != MWL_RXBUF) device_printf(sc->sc_dev, "using %u rx buffers\n", mwl_rxbuf); if (bootverbose || mwl_txbuf != MWL_TXBUF) device_printf(sc->sc_dev, "using %u tx buffers\n", mwl_txbuf); if (bootverbose && mwl_hal_ismbsscapable(sc->sc_mh)) device_printf(sc->sc_dev, "multi-bss support\n"); #ifdef MWL_TX_NODROP if (bootverbose) device_printf(sc->sc_dev, "no tx drop\n"); #endif }