diff --git a/contrib/pf/man/pfsync.4 b/contrib/pf/man/pfsync.4 index 10fc5a6180eb..abc81af4c5a9 100644 --- a/contrib/pf/man/pfsync.4 +++ b/contrib/pf/man/pfsync.4 @@ -1,237 +1,256 @@ .\" $OpenBSD: pfsync.4,v 1.22 2005/02/24 15:53:17 jmc Exp $ .\" .\" Copyright (c) 2002 Michael Shalayeff .\" Copyright (c) 2003-2004 Ryan McBride .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF MIND, .\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd February 23, 2005 .Dt PFSYNC 4 .Os .Sh NAME .Nm pfsync .Nd packet filter state table logging interface .Sh SYNOPSIS .Cd "device pfsync" .Sh DESCRIPTION The .Nm interface is a pseudo-device which exposes certain changes to the state table used by .Xr pf 4 . .\" XXX: not yet! .\" State changes can be viewed by invoking .\" .Xr tcpdump 1 .\" on the .\" .Nm .\" interface. If configured with a physical synchronisation interface, .Nm will send state changes out on that interface using IP multicast, and insert state changes received on that interface from other systems into the state table. .Pp By default, all local changes to the state table are exposed via .Nm . However, state changes from packets received by .Nm over the network are not rebroadcast. States created by a rule marked with the .Ar no-sync keyword are omitted from the .Nm interface (see .Xr pf.conf 5 for details). .Pp The .Nm interface will attempt to collapse multiple updates of the same state into one message where possible. The maximum number of times this can be done before the update is sent out is controlled by the .Ar maxupd parameter to ifconfig (see .Xr ifconfig 8 and the example below for more details). .Pp Each packet retrieved on this interface has a header associated with it of length .Dv PFSYNC_HDRLEN . The header indicates the version of the protocol, address family, action taken on the following states, and the number of state table entries attached in this packet. This structure is defined in .Aq Pa net/if_pfsync.h as: .Bd -literal -offset indent struct pfsync_header { u_int8_t version; u_int8_t af; u_int8_t action; u_int8_t count; }; .Ed .Sh NETWORK SYNCHRONISATION States can be synchronised between two or more firewalls using this interface, by specifying a synchronisation interface using .Xr ifconfig 8 . For example, the following command sets fxp0 as the synchronisation interface: .Bd -literal -offset indent # ifconfig pfsync0 syncdev fxp0 .Ed .Pp By default, state change messages are sent out on the synchronisation interface using IP multicast packets. The protocol is IP protocol 240, PFSYNC, and the multicast group used is 224.0.0.240. When a peer address is specified using the .Ic syncpeer keyword, the peer address is used as a destination for the pfsync traffic, and the traffic can then be protected using .Xr ipsec 4 . In such a configuration, the syncdev should be set to the .Xr enc 4 interface, as this is where the traffic arrives when it is decapsulated, e.g.: .Bd -literal -offset indent # ifconfig pfsync0 syncpeer 10.0.0.2 syncdev enc0 .Ed .Pp It is important that the pfsync traffic be well secured as there is no authentication on the protocol and it would be trivial to spoof packets which create states, bypassing the pf ruleset. Either run the pfsync protocol on a trusted network \- ideally a network dedicated to pfsync messages such as a crossover cable between two firewalls, or specify a peer address and protect the traffic with .Xr ipsec 4 . .Pp +For +.Nm +to start its operation automatically at the system boot time, +.Va pfsync_enable +and +.Va pfsync_syncdev +variables should be used in +.Xr rc.conf 5 . +It is not advisable to set up +.Nm +with common network interface configuration variables of +.Xr rc.conf 5 +because +.Nm +must start after its +.Cm syncdev , +which cannot be always ensured in the latter case. .\" XXX: not yet! +.\" .Pp .\" There is a one-to-one correspondence between packets seen by .\" .Xr bpf 4 .\" on the .\" .Nm .\" interface, and packets sent out on the synchronisation interface, i.e.\& .\" a packet with 4 state deletion messages on .\" .Nm .\" means that the same 4 deletions were sent out on the synchronisation .\" interface. .\" However, the actual packet contents may differ as the messages .\" sent over the network are "compressed" where possible, containing .\" only the necessary information. .Sh EXAMPLES .Nm and .Xr carp 4 can be used together to provide automatic failover of a pair of firewalls configured in parallel. One firewall handles all traffic \- if it dies or is shut down, the second firewall takes over automatically. .Pp Both firewalls in this example have three .Xr sis 4 interfaces. sis0 is the external interface, on the 10.0.0.0/24 subnet; sis1 is the internal interface, on the 192.168.0.0/24 subnet; and sis2 is the .Nm interface, using the 192.168.254.0/24 subnet. A crossover cable connects the two firewalls via their sis2 interfaces. On all three interfaces, firewall A uses the .254 address, while firewall B uses .253. The interfaces are configured as follows (firewall A unless otherwise indicated): .Pp Interfaces configuration in .Pa /etc/rc.conf : .Bd -literal -offset indent +network_interfaces="lo0 sis0 sis1 sis2" cloned_interfaces="carp0 carp1" -network_interfaces="lo0 sis0 sis1 sis2 carp0 carp1 pfsync0" ifconfig_sis0="10.0.0.254/24" ifconfig_sis1="192.168.0.254/24" ifconfig_sis2="192.168.254.254/24" ifconfig_carp0="vhid 1 pass foo 10.0.0.1/24" ifconfig_carp1="vhid 2 pass bar 192.168.0.1/24" -ifconfig_pfsync0="up syncif sis2" +pfsync_enable="YES" +pfsync_syncdev="sis2" .Ed .Pp .Xr pf 4 must also be configured to allow .Nm and .Xr carp 4 traffic through. The following should be added to the top of .Pa /etc/pf.conf : .Bd -literal -offset indent pass quick on { sis2 } proto pfsync pass on { sis0 sis1 } proto carp keep state .Ed .Pp If it is preferable that one firewall handle the traffic, the .Ar advskew on the backup firewall's .Xr carp 4 interfaces should be set to something higher than the primary's. For example, if firewall B is the backup, its carp1 configuration would look like this: .Bd -literal -offset indent ifconfig_carp1="vhid 2 pass bar advskew 100 192.168.0.1/24" .Ed .Pp The following must also be added to .Pa /etc/sysctl.conf : .Bd -literal -offset indent net.inet.carp.preempt=1 .Ed .Sh BUGS Possibility to view state changes using .Xr tcpdump 1 has not been ported from .Ox yet. .Sh SEE ALSO .Xr bpf 4 , .Xr carp 4 , .Xr ifconfig 8 , .Xr inet 4 , .Xr inet6 4 , .Xr ipsec 4 , .Xr netintro 4 , .Xr pf 4 , .Xr pf.conf 5 , .Xr protocols 5 , .Xr rc.conf 5 .Sh HISTORY The .Nm device first appeared in .Ox 3.3 . The .Nm device was imported to .Fx 5.3 . diff --git a/etc/defaults/rc.conf b/etc/defaults/rc.conf index 34b1add26d70..1385061d7520 100644 --- a/etc/defaults/rc.conf +++ b/etc/defaults/rc.conf @@ -1,561 +1,564 @@ #!/bin/sh # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # The ${rc_conf_files} files should only contain values which override # values set in this file. This eases the upgrade path when defaults # are changed and new features are added. # # All arguments must be in double or single quotes. # # For a more detailed explanation of all the rc.conf variables, please # refer to the rc.conf(5) manual page. # # $FreeBSD$ ############################################################## ### Important initial Boot-time options #################### ############################################################## rc_debug="NO" # Set to YES to enable debugging output from rc.d rc_info="NO" # Enables display of informational messages at boot. rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). devd_enable="YES" # Run devd, to trigger programs on device tree changes. kldxref_enable="NO" # Build linker.hints files with kldxref(8). kldxref_clobber="NO" # Overwrite old linker.hints at boot. kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="2" # pccard beep type. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). pccardd_flags="-z" # Additional flags for pccardd. pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file powerd_enable="NO" # Run powerd to lower our power usage. powerd_flags="" # Flags to powerd (if enabled). removable_route_flush="YES" # Flush routes when removing an interface tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never tmpsize="20m" # Size of mfs /tmp if created tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never varsize="32m" # Size of mfs /var if created varmfs_flags="-S -M" # Extra mount options for the mfs /var populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. script_name_sep=" " # Change if your startup scripts' names contain spaces rc_conf_files="/etc/rc.conf /etc/rc.conf.local" # Experimental - test before enabling gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab gbde_devices="NO" # Devices to automatically attach (list, or AUTO) gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices gbde_lockdir="/etc" # Where to look for gbde lockfiles # GELI disk encryption configuration. geli_devices="" # List of devices to automatically attach in addition to # GELI devices listed in /etc/fstab. geli_tries="" # Number of times to attempt attaching geli device. # If empty, kern.geom.eli.tries will be used. geli_default_flags="" # Default flags for geli(8). geli_autodetach="YES" # Automatically detach on last close. # Providers are marked as such when all file systems are # mounted. # Example use. #geli_devices="da1 mirror/home" #geli_da1_flags="-p -k /etc/geli/da1.keys" #geli_da1_autodetach="NO" #geli_mirror_home_flags="-k /etc/geli/home.keys" geli_swap_flags="-a aes -l 256 -s 4096 -d" # Options for GELI-encrypted # swap partitions. root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. background_fsck="YES" # Attempt to run fsck in the background where possible. background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. extra_netfs_types="NO" # List of network extra filesystem types for delayed # mount at startup (or NO). ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network and firewall/security options: ### hostname="" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhclient_program="/sbin/dhclient" # Path to dhcp client program. dhclient_flags="" # Additional flags to pass to dhcp client. background_dhclient="NO" # Start dhcp client in the background. firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display firewall_logging="NO" # Set to YES to enable events logging firewall_flags="" # Flags passed to ipfw when type is a file ip_portrange_first="NO" # Set first dynamically allocated port ip_portrange_last="NO" # Set last dynamically allocated port ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon ike_flags="" # Additional flags for IKE daemon ipsec_enable="NO" # Set to YES to run setkey on ipsec_file ipsec_file="/etc/ipsec.conf" # Name of config file for setkey natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. ipfilter_enable="NO" # Set to YES to enable ipfilter functionality ipfilter_program="/sbin/ipf" # where the ipfilter program lives ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see # /usr/src/contrib/ipfilter/rules for examples ipfilter_flags="" # additional flags for ipfilter ipnat_enable="NO" # Set to YES to enable ipnat functionality ipnat_program="/sbin/ipnat" # where the ipnat program lives ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat ipnat_flags="" # additional flags for ipnat ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" ipfs_enable="NO" # Set to YES to enable saving and restoring # of state tables at shutdown and boot ipfs_program="/sbin/ipfs" # where the ipfs program lives ipfs_flags="" # additional flags for ipfs pf_enable="NO" # Set to YES to enable packet filter (pf) pf_rules="/etc/pf.conf" # rules definition file for pf pf_program="/sbin/pfctl" # where the pfctl program lives pf_flags="" # additional flags for pfctl pflog_enable="NO" # Set to YES to enable packet filter logging pflog_logfile="/var/log/pflog" # where pflogd should store the logfile pflog_program="/sbin/pflogd" # where the pflogd program lives pflog_flags="" # additional flags for pflogd +pfsync_enable="NO" # Expose pf state to other hosts for syncing +pfsync_syncdev="" # Interface for pfsync to work through +pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. log_in_vain="0" # >=1 to log connects to ports w/o listeners. tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). # For the following option you need to have TCP_DROP_SYNFIN set in your # kernel. Please refer to LINT and NOTES for details. tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). cloned_interfaces="" # List of cloned network interfaces to create. #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" gif_interfaces="NO" # List of GIF tunnels (or "NO"). #gif_interfaces="gif0 gif1" # Examples typically for a router. # Choose correct tunnel addrs. #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. # User ppp configuration. ppp_enable="NO" # Start user-ppp (or NO). ppp_program="/usr/sbin/ppp" # Path to user-ppp program. ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". # For details see man page for ppp(8). Default is auto. ppp_nat="YES" # Use PPP's internal network address translation or NO. ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. ppp_user="root" # Which user to run ppp as ### Network daemon (miscellaneous) ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. syslogd_flags="-s" # Flags to syslogd (if enabled). inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. inetd_flags="-wW -C 60" # Optional flags to inetd # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="/usr/sbin/named" # path to named, if you want a different one. named_flags="-u bind" # Flags for named named_pidfile="/var/run/named/pid" # Must set this in named.conf as well named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) named_chroot_autoupdate="YES" # Automatically install/update chrooted # components of named. See /etc/rc.d/named. named_symlink_enable="YES" # Symlink the chrooted pid file # # kerberos. Do not run the admin daemons on slave servers # kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC kerberos5_server_flags="" # Additional flags to the kerberos 5 server kadmind5_server_enable="NO" # Run kadmind (or NO) kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon kpasswdd_server_enable="NO" # Run kpasswdd (or NO) kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. bootparamd_enable="NO" # Run bootparamd (or NO). bootparamd_flags="" # Flags to bootparamd pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). pppoed_interface="fxp0" # The interface that pppoed runs on. sshd_enable="NO" # Enable sshd sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_flags="" # Additional flags for sshd. ### Network daemon (NFS): All need rpcbind_enable="YES" ### amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_access_cache="2" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). mountd_enable="NO" # Run mountd (or NO). mountd_flags="-r" # Flags to mountd (if NFS server enabled). weak_mountd_authentication="NO" # Allow non-root mount requests to be served. nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). nfs_bufpackets="" # bufspace (in packets) for client rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. rpcbind_enable="NO" # Run the portmapper service (YES/NO). rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. rpcbind_flags="" # Flags to rpcbind (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="-b" # Flags to ntpdate (if enabled). ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" # Flags to ntpd (if enabled). # Network Information Services (NIS) options: All need rpcbind_enable="YES" ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### SNMP daemon ### # Be sure to understand the security implications of running SNMP v1/v2 # in your network. bsnmpd_enable="NO" # Run the SNMP daemon (or NO). bsnmpd_flags="" # Flags for bsnmpd. ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). natm_static_routes="" # Set to static route list for NATM (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="/sbin/routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: (see also: /usr/share/examples/isdn) ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_ttype="cons25" # terminal type for fullscreen mode isdn_screenflags="NO" # screenflags for ${isdn_fsdev} isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ### IPv6 options: ### ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. ipv6_router_flags="" # Flags to IPv6 routing daemon. #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local # addrs. #ipv6_router_flags="-q" # If you want to run a routing daemon on an end # node, you should stop advertisement. #ipv6_network_interfaces="ed0 ep0" # Examples for router # or static configuration for end node. # Choose correct prefix value. #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. ipv6_default_interface="NO" # Default output interface for scoped addrs. # Now this works only for IPv6 link local # multicast addrs. rtsol_flags="" # Flags to IPv6 router solicitation. rtadvd_enable="NO" # Set to YES to enable an IPv6 router # advertisement daemon. If set to YES, # this router becomes a possible candidate # IPv6 default router for local subnets. rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. mroute6d_enable="NO" # Do IPv6 multicast routing. mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast # routing daemon. You need to # install it from package or # port. mroute6d_flags="" # Flags to IPv6 multicast routing daemon. stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 # tunneling interface. Specify this entry # to enable 6to4 interface. stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, # to limit peer addr range. Effective value # is 0-31. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. # If you like, you can set "AUTO" for this. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH # IPv6-to-IPv4 TCP translator. You also need # faithd(8) setup. ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr # communication. (like ::ffff:a.b.c.d) ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall # functionality ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) ipv6_firewall_quiet="NO" # Set to YES to suppress rule display ipv6_firewall_logging="NO" # Set to YES to enable events logging ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, # see /usr/src/contrib/ipfilter/rules # for examples ip6addrctl_enable="NO" # Set to YES to enable default address selection ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages ############################################################## ### System console options ################################# ############################################################## keyboard="" # keyboard device to use (default /dev/kbd0). keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko moused_nondefault_enable="YES" # Treat non-default mice as enabled unless # specifically overriden in rc.conf(5). moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your # language code table, specify alternative range # start like mousechar_start=3, see vidcontrol(1) allscreens_flags="" # Set this vidcontrol mode for all virtual screens allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens ############################################################## ### pcvt console driver options ############################ ############################################################## pcvt_verbose="NO" # set to YES to enable verbose configuration messages pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). pcvt_blanktime="NO" # blank time (in seconds) (or NO). pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). ############################################################## ### Mail Transfer Agent (MTA) options ###################### ############################################################## mta_start_script="/etc/rc.sendmail" # Script to start your chosen MTA, called by /etc/rc. # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file sendmail_procname="/usr/sbin/sendmail" # sendmail process name sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" # Flags for localhost-only MTA sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" # Flags for sendmail_msp_queue daemon. ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon. cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). cron_dst="YES" # Handle DST transitions intelligently (YES/NO) cron_flags="" # Which options to pass to the cron daemon. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. chkprintcap_flags="-d" # Create missing directories by default. usbd_enable="NO" # Run the usbd daemon. usbd_flags="" # Flags to usbd (if enabled). dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). dumpdir="/var/crash" # Directory where crash dumps are to be stored savecore_flags="" # Used if dumpdev is enabled above, and present. enable_quotas="NO" # turn on quotas on startup (or NO). check_quotas="YES" # Check quotas on startup (or NO). accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). clear_tmp_enable="NO" # Clear /tmp at startup. ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" # shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure # Note that setting securelevel to 0 will result # in the system booting with securelevel set to 1, as # init(8) will raise the level when rc(8) completes. update_motd="YES" # update version info in /etc/motd (or NO) unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. # /var/db/entropy-file is preferred if / is not avail. entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. entropy_save_sz="2048" # Size of the entropy cache files. entropy_save_num="8" # Number of entropy cache files to save. harvest_interrupt="YES" # Entropy device harvests interrupt randomness harvest_ethernet="YES" # Entropy device harvests ethernet randomness harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot watchdogd_enable="NO" # Start the software watchdog daemon devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing # devfs(8) rules. devfs_system_ruleset="" # The name of a ruleset to apply to /dev devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to # apply (must be mounted already, i.e. fstab(5)) performance_cx_lowest="HIGH" # Online CPU idle state performance_cpu_freq="NONE" # Online CPU frequency economy_cx_lowest="HIGH" # Offline CPU idle state economy_cpu_freq="NONE" # Offline CPU frequency virecover_enable="YES" # Perform housekeeping for the vi(1) editor ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) # ruleset file. newsyslog_enable="YES" # Run newsyslog at startup. newsyslog_flags="-CN" # Newsyslog flags to create marked files ############################################################## ### Jail Configuration ####################################### ############################################################## jail_enable="NO" # Set to NO to disable starting of any jails jail_list="" # Space separated list of names of jails jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail # # To use rc's built-in jail infrastructure create entries for # each jail, specified in jail_list, with the following variables. # NOTE: replace 'example' with the jail's name. # #jail_example_rootdir="/usr/jail/default" # Jail's root directory #jail_example_hostname="default.domain.com" # Jail's hostname #jail_example_ip="192.168.0.10" # Jail's IP number #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping #jail_example_devfs_enable="NO" # mount devfs in the jail #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail #jail_example_procfs_enable="NO" # mount procfs in jail #jail_example_mount_enable="NO" # mount/umount jail's fs #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail #jail_example_fstab="" # fstab(5) for mount/umount #jail_example_flags="-l -U root" # flags for jail(8) ############################################################## ### Define source_rc_confs, the mechanism used by /etc/rc.* ## ### scripts to source rc_conf_files overrides safely. ## ############################################################## if [ -z "${source_rc_confs_defined}" ]; then source_rc_confs_defined=yes source_rc_confs () { local i sourced_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done } fi diff --git a/etc/rc.d/Makefile b/etc/rc.d/Makefile index 74374554260a..e0ba8e58da6d 100755 --- a/etc/rc.d/Makefile +++ b/etc/rc.d/Makefile @@ -1,50 +1,50 @@ # $NetBSD: Makefile,v 1.16 2001/01/14 15:37:22 minoura Exp $ # $FreeBSD$ FILES= DAEMON LOGIN NETWORKING SERVERS \ abi accounting addswap adjkerntz amd \ apm apmd archdep atm1 atm2 atm3 \ bgfsck bootparams bsnmpd \ ccd cleanvar cleartmp cron \ devd devfs dhclient \ dmesg dumpon \ early.sh encswap \ fsck \ gbde geli geli2 \ hostname \ ike \ inetd initrandom \ ip6addrctl ip6fw ipfilter ipfs ipfw ipmon \ ipnat ipsec ipxrouted isdnd \ jail \ kadmind kerberos keyserv kldxref kpasswdd \ ldconfig local localpkg lpd \ mixer motd mountcritlocal mountcritremote \ mountd moused mroute6d mrouted msgs \ named natd netif netoptions \ network_ipv6 newsyslog nfsclient nfsd \ nfslocking nfsserver nisdomain nsswitch ntpd ntpdate \ othermta \ - pccard pcvt pf pflog \ + pccard pcvt pf pflog pfsync \ powerd power_profile ppp-user pppoed pwcheck \ quota \ ramdisk ramdisk-own random rarpd rcconf.sh resolv root \ route6d routed routing rpcbind rtadvd rwho \ savecore securelevel sendmail \ serial sppp swap1 \ syscons sysctl syslogd \ timed tmp \ ugidfw usbd \ var virecover \ watchdogd wpa_supplicant \ ypbind yppasswdd ypserv \ ypset ypupdated ypxfrd .if !defined(NO_OPENSSH) FILES+= sshd .endif FILESDIR= /etc/rc.d FILESMODE= ${BINMODE} .include diff --git a/etc/rc.d/pfsync b/etc/rc.d/pfsync new file mode 100644 index 000000000000..8d490421c163 --- /dev/null +++ b/etc/rc.d/pfsync @@ -0,0 +1,53 @@ +#!/bin/sh +# +# $FreeBSD$ +# + +# PROVIDE: pfsync +# REQUIRE: root mountcritlocal netif +# KEYWORD: nojail + +. /etc/rc.subr + +name="pfsync" +rcvar=`set_rcvar` +start_precmd="pfsync_prestart" +start_cmd="pfsync_start" +stop_cmd="pfsync_stop" + +pfsync_prestart() +{ + case "$pfsync_syncdev" in + '') + warn "pfsync_syncdev is not set." + return 1 + ;; + esac + + # load pf kernel module if needed + if ! kldstat -q -m pf ; then + if kldload pf ; then + info "pf module loaded." + else + warn "pf module failed to load." + return 1 + fi + fi + + return 0 +} + +pfsync_start() +{ + echo "Enabling pfsync." + ifconfig pfsync0 syncdev $pfsync_syncdev $pfsync_ifconfig up +} + +pfsync_stop() +{ + echo "Disabling pfsync." + ifconfig pfsync0 -syncdev down +} + +load_rc_config $name +run_rc_command "$1" diff --git a/share/man/man5/rc.conf.5 b/share/man/man5/rc.conf.5 index cb4b0a319b6b..93862edd430a 100644 --- a/share/man/man5/rc.conf.5 +++ b/share/man/man5/rc.conf.5 @@ -1,3393 +1,3426 @@ .\" Copyright (c) 1995 .\" Jordan K. Hubbard .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd September 28, 2005 .Dt RC.CONF 5 .Os .Sh NAME .Nm rc.conf .Nd system configuration information .Sh DESCRIPTION The file .Nm contains descriptive information about the local host name, configuration details for any potential network interfaces and which services should be started up at system initial boot time. In new installations, the .Nm file is generally initialized by the system installation utility, .Xr sysinstall 8 . .Pp The purpose of .Nm is not to run commands or perform system startup actions directly. Instead, it is included by the various generic startup scripts in .Pa /etc which conditionalize their internal actions according to the settings found there. .Pp The .Pa /etc/rc.conf file is included from the file .Pa /etc/defaults/rc.conf , which specifies the default settings for all the available options. Options need only be specified in .Pa /etc/rc.conf when the system administrator wishes to override these defaults. The file .Pa /etc/rc.conf.local is used to override settings in .Pa /etc/rc.conf for historical reasons. See the .Va rc_conf_files variable below. .Pp The following list provides a name and short description for each variable that can be set in the .Nm file: .Bl -tag -width indent-two .It Va rc_debug .Pq Vt bool If set to .Dq Li YES , enable output of debug messages from rc scripts. This variable can be helpful in diagnosing mistakes when editing or integrating new scripts. Beware that this produces copious output to the terminal and .Xr syslog 3 . .It Va rc_info .Pq Vt bool If set to .Dq Li NO , disable informational messages from the rc scripts. Informational messages are displayed when a condition that is not serious enough to warrant a warning or an error occurs. .It Va swapfile .Pq Vt str If set to .Dq Li NO , no swapfile is installed, otherwise the value is used as the full pathname to a file to use for additional swap space. .It Va apm_enable .Pq Vt bool If set to .Dq Li YES , enable support for Automatic Power Management with the .Xr apm 8 command. .It Va apmd_enable .Pq Vt bool Run .Xr apmd 8 to handle APM event from userland. This also enables support for APM. .It Va apmd_flags .Pq Vt str If .Va apmd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr apmd 8 daemon. .It Va devd_enable .Pq Vt bool Run .Xr devd 8 to handle device added, removed or unknown events from the kernel. .It Va kldxref_enable .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to automatically rebuild .Pa linker.hints files with .Xr kldxref 8 at boot time. .It Va kldxref_clobber .Pq Vt bool Set to .Dq Li NO by default. If .Va kldxref_enable is true, setting to .Dq Li YES will overwrite existing .Pa linker.hints files at boot time. Otherwise, only missing .Pa linker.hints files are generated. .It Va kldxref_module_path .Pq Vt str Empty by default. A semi-colon .Pq Ql \&; delimited list of paths containing .Xr kld 4 modules. If empty, the contents of the .Va kern.module_path .Xr sysctl 8 are used. .It Va pccard_enable .Pq Vt bool If set to .Dq Li YES , enable PCCARD support at boot time. .It Va pccard_mem .Pq Vt str Set to PCCARD controller memory address or .Dq Li DEFAULT for the default value. .It Va pccard_beep .Pq Vt int If 0, set the PCCARD controller to silent mode. If 1, set it to beep mode. If 2, set it to melody mode. .It Va pccard_conf .Pq Vt str Path to the configuration file for the .Xr pccardd 8 daemon (e.g.\& .Pa /etc/pccard.conf.sample ) . .It Va pccardd_flags .Pq Vt str If .Va pccard_enable is set to .Dq Li YES , these are the flags to pass to the .Xr pccardd 8 daemon. .It Va powerd_enable .Pq Vt bool If set to .Dq Li YES , enable the system power control facility with the .Xr powerd 8 daemon. .It Va powerd_flags .Pq Vt str If .Va powerd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr powerd 8 daemon. .It Va tmpmfs Controls the creation of a .Pa /tmp memory file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /tmp is not writable. .It Va tmpsize Controls the size of a created .Pa /tmp memory file system. .It Va tmpmfs_flags Extra options passed to the .Xr mdmfs 8 utility when the memory file system for .Pa /tmp is created. The default is .Dq Li -S -M , which inhibits the use of softupdates on .Pa /tmp to waste as little space as possible and creates a pure memory backed disk, which will never be swapped out, for maximum performance and system stability at low memory conditions. See .Xr mdmfs 8 for other options you can use in .Va tmpmfs_flags . .It Va varmfs Controls the creation of a .Pa /var memory file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /var is not writable. .It Va varsize Controls the size of a created .Pa /var memory file system. .It Va varmfs_flags Extra options passed to the .Xr mdmfs 8 utility when the memory file system for .Pa /var is created. The default is .Dq Li -S -M , which inhibits the use of softupdates on .Pa /var to waste as little space as possible and creates a pure memory backed disk, which will never be swapped out, for maximum performance and system stability at low memory conditions. See .Xr mdmfs 8 for other options you can use in .Va varmfs_flags . .It Va populate_var Controls the automatic population of the .Pa /var file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /var is not writable. Note that this process requires access to certain commands in .Pa /usr before .Pa /usr is mounted on normal systems. .It Va local_startup .Pq Vt str List of directories to search for startup script files. .It Va script_name_sep .Pq Vt str The field separator to use for breaking down the list of startup script files into individual filenames. The default is a space. It is not necessary to change this unless there are startup scripts with names containing spaces. .It Va hostname .Pq Vt str The fully qualified domain name (FQDN) of this host on the network. This should almost certainly be set to something meaningful, even if there is no network connection. If .Xr dhclient 8 is used to set the hostname via DHCP, this variable should be set to an empty string. .It Va ipv6_enable .Pq Vt bool Enable support for IPv6 networking. Note that this requires that the kernel have been compiled with .Cd "options INET6" . .It Va nisdomainname .Pq Vt str The NIS domain name of this host, or .Dq Li NO if NIS is not used. .It Va dhclient_program .Pq Vt str Path to the DHCP client program .Pa ( /sbin/dhclient , the .Ox DHCP client, is the default). .It Va dhclient_flags .Pq Vt str Additional flags to pass to the DHCP client program. For the .Ox DHCP client, see the .Xr dhclient 8 manpage for a description of the command line options available. .It Va background_dhclient .Pq Vt bool Set to .Dq Li YES to start the dhcp client in background. This can cause trouble with applications depending on a working network, but it will provide a faster startup in many cases. .It Va firewall_enable .Pq Vt bool Set to .Dq Li YES to load firewall rules at startup. If the kernel was not built with .Cd "options IPFIREWALL" , the .Pa ipfw.ko kernel module will be loaded. See also .Va ipfilter_enable . .It Va ipv6_firewall_enable .Pq Vt bool The IPv6 equivalent of .Va firewall_enable . Set to .Dq Li YES to load IPv6 firewall rules at startup. If the kernel was not built with .Cd "options IPV6FIREWALL" , the .Pa ip6fw.ko kernel module will be loaded. .It Va firewall_script .Pq Vt str This variable specifies the full path to the firewall script to run. The default is .Pa /etc/rc.firewall . .It Va ipv6_firewall_script .Pq Vt str The IPv6 equivalent of .Va firewall_script . .It Va firewall_type .Pq Vt str Names the firewall type from the selection in .Pa /etc/rc.firewall , or the file which contains the local firewall ruleset. Valid selections from .Pa /etc/rc.firewall are: .Pp .Bl -tag -width ".Li simple" -compact .It Li open unrestricted IP access .It Li closed all IP services disabled, except via .Dq Li lo0 .It Li client basic protection for a workstation .It Li simple basic protection for a LAN. .El .Pp If a filename is specified, the full path must be given. .It Va ipv6_firewall_type .Pq Vt str The IPv6 equivalent of .Va firewall_type . .It Va firewall_quiet .Pq Vt bool Set to .Dq Li YES to disable the display of firewall rules on the console during boot. .It Va ipv6_firewall_quiet .Pq Vt bool The IPv6 equivalent of .Va firewall_quiet . .It Va firewall_logging .Pq Vt bool Set to .Dq Li YES to enable firewall event logging. This is equivalent to the .Dv IPFIREWALL_VERBOSE kernel option. .It Va ipv6_firewall_logging .Pq Vt bool The IPv6 equivalent of .Va firewall_logging . .It Va firewall_flags .Pq Vt str Flags passed to .Xr ipfw 8 if .Va firewall_type specifies a filename. .It Va ipv6_firewall_flags .Pq Vt str The IPv6 equivalent of .Va firewall_flags . .It Va natd_program .Pq Vt str Path to .Xr natd 8 . .It Va natd_enable .Pq Vt bool Set to .Dq Li YES to enable .Xr natd 8 . .Va firewall_enable must also be set to .Dq Li YES , and .Xr divert 4 sockets must be enabled in the kernel. If the kernel was not built with .Cd "options IPDIVERT" , the .Pa ipdivert.ko kernel module will be loaded. .It Va natd_interface .Pq Vt str This is the name of the public interface on which .Xr natd 8 should run. The interface may be given as an interface name or as an IP address. .It Va natd_flags .Pq Vt str Additional .Xr natd 8 flags should be placed here. The .Fl n or .Fl a flag is automatically added with the above .Va natd_interface as an argument. .\" ----- ipfilter_enable setting -------------------------------- .It Va ipfilter_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr ipf 8 packet filtering. .Pp Typical usage will require putting .Bd -literal ipfilter_enable="YES" ipnat_enable="YES" ipmon_enable="YES" ipfs_enable="YES" .Ed .Pp into .Pa /etc/rc.conf and editing .Pa /etc/ipf.rules and .Pa /etc/ipnat.rules appropriately. .Pp Note that .Va ipfilter_enable and .Va ipnat_enable can be enabled independently. .Va ipmon_enable and .Va ipfs_enable both require at least one of .Va ipfilter_enable and .Va ipnat_enable to be enabled. .Pp Having .Bd -literal options IPFILTER options IPFILTER_LOG options IPFILTER_DEFAULT_BLOCK .Ed .Pp in the kernel configuration file is a good idea, too. .\" ----- ipfilter_program setting ------------------------------ .It Va ipfilter_program .Pq Vt str Path to .Xr ipf 8 (default .Pa /sbin/ipf ) . .\" ----- ipfilter_rules setting -------------------------------- .It Va ipfilter_rules .Pq Vt str Set to .Pa /etc/ipf.rules by default. This variable contains the name of the filter rule definition file. The file is expected to be readable for the .Xr ipf 8 command to execute. .\" ----- ipv6_ipfilter_rules setting --------------------------- .It Va ipv6_ipfilter_rules .Pq Vt str Set to .Pa /etc/ipf6.rules by default. This variable contains the IPv6 filter rule definition file. The file is expected to be readable for the .Xr ipf 8 command to execute. .\" ----- ipfilter_flags setting -------------------------------- .It Va ipfilter_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipf 8 program. .\" ----- ipnat_enable setting ---------------------------------- .It Va ipnat_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipnat 1 network address translation. See .Va ipfilter_enable for a detailed discussion. .\" ----- ipnat_program setting --------------------------------- .It Va ipnat_program .Pq Vt str Path to .Xr ipnat 1 (default .Pa /sbin/ipnat ) . .\" ----- ipnat_rules setting ----------------------------------- .It Va ipnat_rules .Pq Vt str Set to .Pa /etc/ipnat.rules by default. This variable contains the name of the file holding the network address translation definition. This file is expected to be readable for the .Xr ipnat 1 command to execute. .\" ----- ipnat_flags setting ----------------------------------- .It Va ipnat_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipnat 1 program. .\" ----- ipmon_enable setting ---------------------------------- .It Va ipmon_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipmon 8 monitoring (logging .Xr ipf 8 and .Xr ipnat 1 events). Setting this variable needs setting .Va ipfilter_enable or .Va ipnat_enable too. See .Va ipfilter_enable for a detailed discussion. .\" ----- ipmon_program setting --------------------------------- .It Va ipmon_program .Pq Vt str Path to .Xr ipmon 8 (default .Pa /sbin/ipmon ) . .\" ----- ipmon_flags setting ----------------------------------- .It Va ipmon_flags .Pq Vt str Set to .Dq Li -Ds by default. This variable contains flags passed to the .Xr ipmon 8 program. Another typical example would be .Dq Fl D Pa /var/log/ipflog to have .Xr ipmon 8 log directly to a file bypassing .Xr syslogd 8 . Make sure to adjust .Pa /etc/newsyslog.conf in such case like this: .Bd -literal /var/log/ipflog 640 10 100 * Z /var/run/ipmon.pid .Ed .\" ----- ipfs_enable setting ----------------------------------- .It Va ipfs_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipfs 8 saving the filter and NAT state tables during shutdown and reloading them during startup again. Setting this variable needs setting .Va ipfilter_enable or .Va ipnat_enable to .Dq Li YES too. See .Va ipfilter_enable for a detailed discussion. Note that if .Va kern_securelevel is set to 3, .Va ipfs_enable cannot be used because the raised securelevel will prevent .Xr ipfs 8 from saving the state tables at shutdown time. .\" ----- ipfs_program setting ---------------------------------- .It Va ipfs_program .Pq Vt str Path to .Xr ipfs 8 (default .Pa /sbin/ipfs ) . .\" ----- ipfs_flags setting ------------------------------------ .It Va ipfs_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipfs 8 program. .\" ----- end of added ipf hook --------------------------------- .It Va pf_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr pf 4 packet filtering. .Pp Typical usage will require putting .Pp .Dl pf_enable="YES" .Pp into .Pa /etc/rc.conf and editing .Pa /etc/pf.conf appropriately. .Pp .Dl "device pf" .Pp builds .Xr pf 4 into the kernel. Otherwise it is loaded from a module. .It Va pf_rules .Pq Vt str Path to .Xr pf 4 ruleset configuration file (default .Pa /etc/pf.conf ) . .It Va pf_program .Pq Vt str Path to .Xr pfctl 8 (default .Pa /sbin/pfctl ) . .It Va pf_flags .Pq Vt str If .Va pf_enable is set to .Dq Li YES , these flags are passed to the .Xr pfctl 8 program when loading the ruleset. .It Va pflog_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr pflogd 8 which logs packets from the .Xr pf 4 packet filter. .It Va pflog_logfile .Pq Vt str If .Va pflog_enable is set to .Dq Li YES this controls where .Xr pflogd 8 stores the logfile (default .Pa /var/log/pflog ) . Check .Pa /etc/newsyslog.conf to adjust logfile rotation for this. .It Va pflog_program .Pq Vt str Path to .Xr pflogd 8 (default .Pa /sbin/pflogd ) . .It Va pflog_flags .Pq Vt str Empty by default. This variable contains additional flags passed to the .Xr pflogd 8 program. +.It Va pfsync_enable +.Pq Vt bool +Set to +.Dq Li NO +by default. +Setting this to +.Dq Li YES +enables exposing +.Xr pf 4 +state changes to other hosts over the network by means of +.Xr pfsync 4 . +The +.Va pfsync_syncdev +variable +must also be set then. +.It Va pfsync_syncdev +.Pq Vt str +Empty by default. +This variable specifies the name of the network interface +.Xr pfsync 4 +should operate through. +It must be set accordingly if +.Va pfsync_enable +is set to +.Dq Li YES . +.It Va pfsync_ifconfig +.Pq Vt str +Empty by default. +This variable can contain additional options to be passed to the +.Xr ifconfig 8 +command used to set up +.Xr pfsync 4 . .It Va tcp_extensions .Pq Vt bool Set to .Dq Li YES by default. Setting this to .Dq Li NO disables certain TCP options as described by .Rs .%T "RFC 1323" .Re Setting this to .Dq Li NO might help remedy such problems with connections as randomly hanging or other weird behavior. Some network devices are known to be broken with respect to these options. .It Va log_in_vain .Pq Vt int Set to 0 by default. The .Xr sysctl 8 variables, .Va net.inet.tcp.log_in_vain and .Va net.inet.udp.log_in_vain , as described in .Xr tcp 4 and .Xr udp 4 , are set to the given value. .It Va tcp_keepalive .Pq Vt bool Set to .Dq Li YES by default. Setting to .Dq Li NO will disable probing idle TCP connections to verify that the peer is still up and reachable. .It Va tcp_drop_synfin .Pq Vt bool Set to .Dq Li NO by default. Setting to .Dq Li YES will cause the kernel to ignore TCP frames that have both the SYN and FIN flags set. This prevents OS fingerprinting, but may break some legitimate applications. This option is only available if the kernel was built with the .Dv TCP_DROP_SYNFIN option. .It Va icmp_drop_redirect .Pq Vt bool Set to .Dq Li NO by default. Setting to .Dq Li YES will cause the kernel to ignore ICMP REDIRECT packets. Refer to .Xr icmp 4 for more information. .It Va icmp_log_redirect .Pq Vt bool Set to .Dq Li NO by default. Setting to .Dq Li YES will cause the kernel to log ICMP REDIRECT packets. Note that the log messages are not rate-limited, so this option should only be used for troubleshooting networks. Refer to .Xr icmp 4 for more information. .It Va icmp_bmcastecho .Pq Vt bool Set to .Dq Li YES to respond to broadcast or multicast ICMP ping packets. Refer to .Xr icmp 4 for more information. .It Va ip_portrange_first .Pq Vt int If not set to .Dq Li NO , this is the first port in the default portrange. Refer to .Xr ip 4 for more information. .It Va ip_portrange_last .Pq Vt int If not set to .Dq Li NO , this is the last port in the default portrange. Refer to .Xr ip 4 for more information. .It Va network_interfaces .Pq Vt str Set to the list of network interfaces to configure on this host or .Dq Li "AUTO" (the default) for all current interfaces. For example, if the only active network devices in the system are the loopback device .Pq Li lo0 and a NIC using the .Xr ed 4 driver, this could be set to .Dq Li "lo0 ed0" . .Pp An .Va ifconfig_ Ns Aq Ar interface variable is also assumed to exist for each value of .Ar interface . The variable can contain arguments to .Xr ifconfig 8 , as well as special case-insensitive keywords described below. Such keywords are removed before passing the value to .Xr ifconfig 8 while the order of the other arguments is preserved. .Pp It is also possible to add IP alias entries here in cases where multiple IP addresses registered against a single interface are desired. Assuming that the interface in question was .Li ed0 , it might look something like this: .Bd -literal ifconfig_ed0_alias0="inet 127.0.0.253 netmask 0xffffffff" ifconfig_ed0_alias1="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp And so on. For each .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n entry that is found, its contents are passed to .Xr ifconfig 8 . Execution stops at the first unsuccessful access, so if something like this is present: .Bd -literal ifconfig_ed0_alias0="inet 127.0.0.251 netmask 0xffffffff" ifconfig_ed0_alias1="inet 127.0.0.252 netmask 0xffffffff" ifconfig_ed0_alias2="inet 127.0.0.253 netmask 0xffffffff" ifconfig_ed0_alias4="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp Then note that alias4 would .Em not be added since the search would stop with the missing .Dq Li alias3 entry. .Pp If the .Pa /etc/start_if. Ns Aq Ar interface file is present, it is read and executed by the .Xr sh 1 interpreter before configuring the interface as specified in the .Va ifconfig_ Ns Aq Ar interface and .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n variables. .Pp If the .Va ifconfig_ Ns Aq Ar interface contains the keyword .Dq Li "NOAUTO" then the interface will not be configured at boot or by .Pa /etc/pccard_ether when .Va network_interfaces is set to .Dq Li "AUTO" . .Pp It is possible to bring up an interface with DHCP by adding .Dq Li DHCP to the .Va ifconfig_ Ns Aq Ar interface variable. For instance, to initialize the .Li ed0 device via DHCP, it is possible to use something like: .Bd -literal ifconfig_ed0="DHCP" .Ed .Pp Also, if your interface needs WPA authentication, it is possible to add .Dq Li WPA to the .Va ifconfig_ Ns Aq Ar interface variable. .Pp Finally, you can add .Xr ifconfig 8 options in this variable, in addition to the .Pa /etc/start_if. Ns Aq Ar interface file. For instance, to initialize the .Li wi0 device via DHCP, using WPA authentication and 802.11b mode, it is possible to use something like: .Bd -literal ifconfig_wi0="DHCP WPA mode 11b" .Ed .Pp In addition to the .Va ifconfig_ Ns Aq Ar interface form, a fallback variable .Va ifconfig_DEFAULT may be configured. It will be used for all interfaces with no .Va ifconfig_ Ns Aq Ar interface variable. This is intended to replace the no longer supported .Va pccard_ifconfig variable. .Pp It is also possible to rename interface by doing: .Bd -literal ifconfig_ed0_name="net0" ifconfig_net0="inet 10.0.0.1 netmask 0xffff0000" .Ed .It Va ipv6_network_interfaces .Pq Vt str This is the IPv6 equivalent of .Va network_interfaces . Instead of setting the ifconfig variables as .Va ifconfig_ Ns Aq Ar interface they should be set as .Va ipv6_ifconfig_ Ns Aq Ar interface . Aliases should be set as .Va ipv6_ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n . .Va ipv6_prefix_ Ns Aq Ar interface does something. Interfaces that do not have a .Va ipv6_ifconfig_ Ns Aq Ar interface setting will be auto configured by .Xr rtsol 8 if the .Va ipv6_gateway_enable is set to .Dq Li NO . Note that the IPv6 networking code does not support the .Pa /etc/start_if. Ns Aq Ar interface files. .It Va ipv6_default_interface .Pq Vt str If not set to .Dq Li NO , this is the default output interface for scoped addresses. Now this works only for IPv6 link local multicast addresses. .It Va cloned_interfaces .Pq Vt str Set to the list of clonable network interfaces to create on this host. Entries in .Va cloned_interfaces are automatically appended to .Va network_interfaces for configuration. .It Va gif_interfaces .Pq Vt str Set to the list of .Xr gif 4 tunnel interfaces to configure on this host. A .Va gifconfig_ Ns Aq Ar interface variable is assumed to exist for each value of .Ar interface . The value of this variable is used to configure the link layer of the tunnel according to the syntax of the .Cm tunnel option to .Xr ifconfig 8 . Additionally, this option ensures that each listed interface is created via the .Cm create option to .Xr ifconfig 8 before attempting to configure it. .It Va sppp_interfaces .Pq Vt str Set to the list of .Xr sppp 4 interfaces to configure on this host. A .Va spppconfig_ Ns Aq Ar interface variable is assumed to exist for each value of .Ar interface . Each interface should also be configured by a general .Va ifconfig_ Ns Aq Ar interface setting. Refer to .Xr spppcontrol 8 for more information about available options. .It Va ppp_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ppp 8 daemon. .It Va ppp_mode .Pq Vt str Mode in which to run the .Xr ppp 8 daemon. Accepted modes are .Dq Li auto , .Dq Li ddial , .Dq Li direct and .Dq Li dedicated . See the manual for a full description. .It Va ppp_nat .Pq Vt bool If set to .Dq Li YES , enables network address translation. Used in conjunction with .Va gateway_enable allows hosts on private network addresses access to the Internet using this host as a network address translating router. .It Va ppp_profile .Pq Vt str The name of the profile to use from .Pa /etc/ppp/ppp.conf . .It Va ppp_user .Pq Vt str The name of the user under which .Xr ppp 8 should be started. By default, .Xr ppp 8 is started as .Dq Li root . .It Va rc_conf_files .Pq Vt str This option is used to specify a list of files that will override the settings in .Pa /etc/defaults/rc.conf . The files will be read in the order in which they are specified and should include the full path to the file. By default, the files specified are .Pa /etc/rc.conf and .Pa /etc/rc.conf.local .It Va gbde_autoattach_all .Pq Vt bool If set to .Dq Li YES , .Pa /etc/rc.d/gbde will attempt to automatically initialize your .bde devices in .Pa /etc/fstab . .It Va gbde_devices .Pq Vt str List the devices that the script should try to attach, or .Dq Li AUTO . .It Va gbde_lockdir .Pq Vt str The directory where the .Xr gbde 4 lockfiles are located. The default lockfile directory is .Pa /etc . .Pp The lockfile for each individual .Xr gbde 4 device can be overridden by setting the variable .Va gbde_lock_ Ns Aq Ar device , where .Ar device is the encrypted device without the .Dq Pa /dev/ and .Dq Pa .bde parts. .It Va gbde_attach_attempts .Pq Vt int Number of times to attempt attaching to a .Xr gbde 4 device, i.e., how many times the user is asked for the pass-phrase. Default is 3. .It Va geli_devices .Pq Vt str List of devices to automatically attach on boot. Note that .eli devices from .Pa /etc/fstab are automatically appended to this list. .It Va geli_tries .Pq Vt int Number of times user is asked for the pass-phrase. If empty, it will be taken from .Va kern.geom.eli.tries sysctl variable. .It Va geli_default_flags .Pq Vt str Default flags to use by .Xr geli 8 when configuring disk encryption. Flags can be configured for every device separately by defining .Va geli__flags variable. .It Va geli_autodetach .Pq Vt str Specifies if GELI devices should be marked for detach on last close after file systems are mounted. Default is .Dq Li YES . This can be changed for every device separately by defining .Va geli__autodetach variable. .It Va geli_swap_flags Options passed to the .Xr geli 8 utility when encrypted GEOM providers for swap partitions are created. The default is .Dq Li -a aes -l 256 -s 4096 -d . .It Va root_rw_mount .Pq Vt bool Set to .Dq Li YES by default. After the file systems are checked at boot time, the root file system is remounted as read-write if this is set to .Dq Li YES . Diskless systems that mount their root file system from a read-only remote NFS share should set this to .Dq Li NO in their .Pa rc.conf . .It Va fsck_y_enable .Pq Vt bool If set to .Dq Li YES , .Xr fsck 8 will be run with the .Fl y flag if the initial preen of the file systems fails. .It Va background_fsck .Pq Vt bool If set to .Dq Li YES , the system will attempt to run .Xr fsck 8 in the background where possible. .It Va background_fsck_delay .Pq Vt int The amount of time in seconds to sleep before starting a background .Xr fsck 8 . It defaults to sixty seconds to allow large applications such as the X server to start before disk I/O bandwidth is monopolized by .Xr fsck 8 . .It Va netfs_types .Pq Vt str List of file system types that are network-based. This list should generally not be modified by end users. Use .Va extra_netfs_types instead. .It Va extra_netfs_types .Pq Vt str If set to something other than .Dq Li NO (the default), this variable extends the list of file system types for which automatic mounting at startup by .Xr rc 8 should be delayed until the network is initialized. It should contain a whitespace-separated list of network file system descriptor pairs, each consisting of a file system type as passed to .Xr mount 8 and a human-readable, one-word description, joined with a colon .Pq Ql \&: . Extending the default list in this way is only necessary when third party file system types are used. .It Va syslogd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr syslogd 8 daemon. .It Va syslogd_program .Pq Vt str Path to .Xr syslogd 8 (default .Pa /usr/sbin/syslogd ) . .It Va syslogd_flags .Pq Vt str If .Va syslogd_enable is set to .Dq Li YES , these are the flags to pass to .Xr syslogd 8 . .It Va inetd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr inetd 8 daemon. .It Va inetd_program .Pq Vt str Path to .Xr inetd 8 (default .Pa /usr/sbin/inetd ) . .It Va inetd_flags .Pq Vt str If .Va inetd_enable is set to .Dq Li YES , these are the flags to pass to .Xr inetd 8 . .It Va named_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr named 8 daemon. .It Va named_program .Pq Vt str Path to .Xr named 8 (default .Pa /usr/sbin/named ) . .It Va named_flags .Pq Vt str If .Va named_enable is set to .Dq Li YES , these are the flags to pass to .Xr named 8 . .It Va named_pidfile .Pq Vt str This is the default path to the .Xr named 8 daemon's PID file. Change it if you change the location in .Xr named.conf 5 . .It Va named_chrootdir .Pq Vt str The root directory for a name server run in a .Xr chroot 8 environment (default .Pa /var/named ) . If left empty .Xr named 8 will not be run in a .Xr chroot 8 environment. .It Va named_chroot_autoupdate .Pq Vt bool Set to .Dq Li NO to disable automatic update of the .Xr chroot 8 environment. .It Va named_symlink_enable .Pq Vt bool Set to .Dq Li NO to disable symlinking of daemon's PID file into the .Xr chroot 8 environment. .It Va kerberos5_server_enable .Pq Vt bool Set to .Dq Li YES to start a Kerberos 5 authentication server at boot time. .It Va kerberos5_server .Pq Vt str If .Va kerberos5_server_enable is set to .Dq Li YES this is the path to Kerberos 5 Authentication Server. .It Va kerberos5_server_flags .Pq Vt str Empty by default. This variable contains additional flags to be passed to the Kerberos 5 authentication server. .It Va kadmind5_server_enable .Pq Vt bool Set to .Dq Li YES to start .Xr kadmind 8 , the Kerberos 5 Administration Daemon; set to .Dq Li NO on a slave server. .It Va kadmind5_server .Pq Vt str If .Va kadmind5_server_enable is set to .Dq Li YES this is the path to Kerberos 5 Administration Daemon. .It Va kpasswdd_server_enable .Pq Vt bool Set to .Dq Li YES to start .Xr kpasswdd 8 , the Kerberos 5 Password-Changing Daemon; set to .Dq Li NO on a slave server. .It Va kpasswdd_server .Pq Vt str If .Va kpasswdd_server_enable is set to .Dq Li YES this is the path to Kerberos 5 Password-Changing Daemon. .It Va rwhod_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rwhod 8 daemon at boot time. .It Va rwhod_flags .Pq Vt str If .Va rwhod_enable is set to .Dq Li YES , these are the flags to pass to it. .It Va amd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr amd 8 daemon at boot time. .It Va amd_flags .Pq Vt str If .Va amd_enable is set to .Dq Li YES , these are the flags to pass to it. See the .Xr amd 8 manpage for more information. .It Va amd_map_program .Pq Vt str If set, the specified program is run to get the list of .Xr amd 8 maps. For example, if the .Xr amd 8 maps are stored in NIS, one can set this to run .Xr ypcat 1 to get a list of .Xr amd 8 maps from the .Pa amd.master NIS map. .It Va update_motd .Pq Vt bool If set to .Dq Li YES , .Pa /etc/motd will be updated at boot time to reflect the kernel release being run. If set to .Dq Li NO , .Pa /etc/motd will not be updated. .It Va nfs_client_enable .Pq Vt bool If set to .Dq Li YES , run the NFS client daemons at boot time. .It Va nfs_access_cache .Pq Vt int If .Va nfs_client_enable is set to .Dq Li YES , this can be set to .Dq Li 0 to disable NFS ACCESS RPC caching, or to the number of seconds for which NFS ACCESS results should be cached. A value of 2-10 seconds will substantially reduce network traffic for many NFS operations. .It Va nfs_server_enable .Pq Vt bool If set to .Dq Li YES , run the NFS server daemons at boot time. .It Va nfs_server_flags .Pq Vt str If .Va nfs_server_enable is set to .Dq Li YES , these are the flags to pass to the .Xr nfsd 8 daemon. .It Va mountd_enable .Pq Vt bool If set to .Dq Li YES , and no .Va nfs_server_enable is set, start .Xr mountd 8 , but not .Xr nfsd 8 daemon. It is commonly needed to run CFS without real NFS used. .It Va mountd_flags .Pq Vt str If .Va mountd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr mountd 8 daemon. .It Va weak_mountd_authentication .Pq Vt bool If set to .Dq Li YES , allow services like PCNFSD to make non-privileged mount requests. .It Va nfs_reserved_port_only .Pq Vt bool If set to .Dq Li YES , provide NFS services only on a secure port. .It Va nfs_bufpackets .Pq Vt int If set to a number, indicates the number of packets worth of socket buffer space to reserve on an NFS client. The kernel default is typically 4. Using a higher number may be useful on gigabit networks to improve performance. The minimum value is 2 and the maximum is 64. .It Va rpc_lockd_enable .Pq Vt bool If set to .Dq Li YES and also an NFS server, run .Xr rpc.lockd 8 at boot time. .It Va rpc_statd_enable .Pq Vt bool If set to .Dq Li YES and also an NFS server, run .Xr rpc.statd 8 at boot time. .It Va rpcbind_program .Pq Vt str Path to .Xr rpcbind 8 (default .Pa /usr/sbin/rpcbind ) . .It Va rpcbind_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpcbind 8 service at boot time. .It Va rpcbind_flags .Pq Vt str If .Va rpcbind_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpcbind 8 daemon. .It Va keyserv_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr keyserv 8 daemon on boot for running Secure RPC. .It Va keyserv_flags .Pq Vt str If .Va keyserv_enable is set to .Dq Li YES , these are the flags to pass to .Xr keyserv 8 daemon. .It Va pppoed_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr pppoed 8 daemon at boot time to provide PPP over Ethernet services. .It Va pppoed_ Ns Ar provider .Pq Vt str .Xr pppoed 8 listens to requests to this .Ar provider and ultimately runs .Xr ppp 8 with a .Ar system argument of the same name. .It Va pppoed_flags .Pq Vt str Additional flags to pass to .Xr pppoed 8 . .It Va pppoed_interface .Pq Vt str The network interface to run .Xr pppoed 8 on. This is mandatory when .Va pppoed_enable is set to .Dq Li YES . .It Va timed_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr timed 8 service at boot time. This command is intended for networks of machines where a consistent .Dq "network time" for all hosts must be established. This is often useful in large NFS environments where time stamps on files are expected to be consistent network-wide. .It Va timed_flags .Pq Vt str If .Va timed_enable is set to .Dq Li YES , these are the flags to pass to the .Xr timed 8 service. .It Va ntpdate_enable .Pq Vt bool If set to .Dq Li YES , run .Xr ntpdate 8 at system startup. This command is intended to synchronize the system clock only .Em once from some standard reference. An option to set this up initially (from a list of known servers) is also provided by the .Xr sysinstall 8 program when the system is first installed. .It Va ntpdate_hosts .Pq Vt str A whitespace-separated list of NTP servers to synchronize with at startup. The default is to use the servers listed in .Pa /etc/ntp.conf , if that file exists. .It Va ntpdate_program .Pq Vt str Path to .Xr ntpdate 8 (default .Pa /usr/sbin/ntpdate ) . .It Va ntpdate_flags .Pq Vt str If .Va ntpdate_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ntpdate 8 command (typically a hostname). .It Va ntpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ntpd 8 command at boot time. .It Va ntpd_program .Pq Vt str Path to .Xr ntpd 8 (default .Pa /usr/sbin/ntpd ) . .It Va ntpd_flags .Pq Vt str If .Va ntpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ntpd 8 daemon. .It Va ntpd_sync_on_start .Pq Vt bool If set to .Dq Li YES , .Xr ntpd 8 is run with the .Fl g flag, which syncs the system's clock on startup. See .Xr ntpd 8 for more information regarding the .Fl g option. This is a preferred alternative to using .Xr ntpdate 8 or specifying the .Va ntpdate_enable variable. .It Va nis_client_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypbind 8 service at system boot time. .It Va nis_client_flags .Pq Vt str If .Va nis_client_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypbind 8 service. .It Va nis_ypset_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypset 8 daemon at system boot time. .It Va nis_ypset_flags .Pq Vt str If .Va nis_ypset_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypset 8 daemon. .It Va nis_server_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypserv 8 daemon at system boot time. .It Va nis_server_flags .Pq Vt str If .Va nis_server_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypserv 8 daemon. .It Va nis_ypxfrd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpc.ypxfrd 8 daemon at system boot time. .It Va nis_ypxfrd_flags .Pq Vt str If .Va nis_ypxfrd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.ypxfrd 8 daemon. .It Va nis_yppasswdd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpc.yppasswdd 8 daemon at system boot time. .It Va nis_yppasswdd_flags .Pq Vt str If .Va nis_yppasswdd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.yppasswdd 8 daemon. .It Va rpc_ypupdated_enable .Pq Vt bool If set to .Dq Li YES , run the .Nm rpc.ypupdated daemon at system boot time. .It Va bsnmpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr bsnmpd 1 daemon at system boot time. Be sure to understand the security implications of running SNMP daemon on your host. .It Va bsnmpd_flags .Pq Vt str If .Va bsnmpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr bsnmpd 1 daemon. .It Va defaultrouter .Pq Vt str If not set to .Dq Li NO , create a default route to this host name or IP address (use an IP address if this router is also required to get to the name server!). .It Va ipv6_defaultrouter .Pq Vt str The IPv6 equivalent of .Va defaultrouter . .It Va static_routes .Pq Vt str Set to the list of static routes that are to be added at system boot time. If not set to .Dq Li NO then for each whitespace separated .Ar element in the value, a .Va route_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm route Cm add operation. For example: .Bd -literal static_routes="mcast gif0local" route_mcast="-net 224.0.0.0/4 -iface gif0" route_gif0local="-host 169.254.1.1 -iface lo0" .Ed .It Va ipv6_static_routes .Pq Vt str The IPv6 equivalent of .Va static_routes . If not set to .Dq Li NO then for each whitespace separated .Ar element in the value, a .Va ipv6_route_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm route Cm add Fl inet6 operation. .It Va natm_static_routes .Pq Vt str The .Xr natmip 4 equivalent of .Va static_routes . If not empty then for each whitespace separated .Ar element in the value, a .Va route_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm atmconfig Cm natm Cm add operation. .It Va gateway_enable .Pq Vt bool If set to .Dq Li YES , configure host to act as an IP router, e.g.\& to forward packets between interfaces. .It Va ipv6_gateway_enable .Pq Vt bool The IPv6 equivalent of .Va gateway_enable . .It Va router_enable .Pq Vt bool If set to .Dq Li YES , run a routing daemon of some sort, based on the settings of .Va router and .Va router_flags . .It Va ipv6_router_enable .Pq Vt bool The IPv6 equivalent of .Va router_enable . If set to .Dq Li YES , run a routing daemon of some sort, based on the settings of .Va ipv6_router and .Va ipv6_router_flags . .It Va router .Pq Vt str If .Va router_enable is set to .Dq Li YES , this is the name of the routing daemon to use. .It Va ipv6_router .Pq Vt str The IPv6 equivalent of .Va router . .It Va router_flags .Pq Vt str If .Va router_enable is set to .Dq Li YES , these are the flags to pass to the routing daemon. .It Va ipv6_router_flags .Pq Vt str The IPv6 equivalent of .Va router_flags . .It Va mrouted_enable .Pq Vt bool If set to .Dq Li YES , run the multicast routing daemon, .Xr mrouted 8 . .It Va mroute6d_enable .Pq Vt bool The IPv6 equivalent of .Va mrouted_enable . If set to .Dq Li YES , run the IPv6 multicast routing daemon. Note that no IPv6 multicast routing daemon is included in the .Fx base system but .Xr pim6dd 8 can be installed from the .Fx Ports Collection. .It Va mrouted_flags .Pq Vt str If .Va mrouted_enable is set to .Dq Li YES , these are the flags to pass to the .Xr mrouted 8 daemon. .It Va mroute6d_flags .Pq Vt str The IPv6 equivalent of .Va mrouted_flags . If .Va mroute6d_enable is set to .Dq Li YES , these are the flags passed to the IPv6 multicast routing daemon. .It Va mroute6d_program .Pq Vt str If .Va mroute6d_enable is set to .Dq Li YES , this is the path to the IPv6 multicast routing daemon. .It Va rtadvd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rtadvd 8 daemon at boot time. .Xr rtadvd 8 will only run if .Va ipv6_gateway_enable is also set to .Dq Li YES . The .Xr rtadvd 8 utility sends router advertisement packets to the interfaces specified in .Va rtadvd_interfaces and should only be enabled with great care. You may want to fine-tune .Xr rtadvd.conf 5 . .It Va rtadvd_interfaces .Pq Vt str If .Va rtadvd_enable is set to .Dq Li YES this is the list of interfaces to use. .It Va ipxgateway_enable .Pq Vt bool If set to .Dq Li YES , enable the routing of IPX traffic. .It Va ipxrouted_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr IPXrouted 8 daemon at system boot time. .It Va ipxrouted_flags .Pq Vt str If .Va ipxrouted_enable is set to .Dq Li YES , these are the flags to pass to the .Xr IPXrouted 8 daemon. .It Va arpproxy_all .Pq Vt bool If set to .Dq Li YES , enable global proxy ARP. .It Va forward_sourceroute .Pq Vt bool If set to .Dq Li YES and .Va gateway_enable is also set to .Dq Li YES , source-routed packets are forwarded. .It Va accept_sourceroute .Pq Vt bool If set to .Dq Li YES , the system will accept source-routed packets directed at it. .It Va rarpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rarpd 8 daemon at system boot time. .It Va rarpd_flags .Pq Vt str If .Va rarpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rarpd 8 daemon. .It Va bootparamd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr bootparamd 8 daemon at system boot time. .It Va bootparamd_flags .Pq Vt str If .Va bootparamd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr bootparamd 8 daemon. .It Va stf_interface_ipv4addr .Pq Vt str If not set to .Dq Li NO , this is the local IPv4 address for 6to4 (IPv6 over IPv4 tunneling interface). Specify this entry to enable the 6to4 interface. .It Va stf_interface_ipv4plen .Pq Vt int Prefix length for 6to4 IPv4 addresses, to limit peer address range. An effective value is 0-31. .It Va stf_interface_ipv6_ifid .Pq Vt str IPv6 interface ID for .Xr stf 4 . This can be set to .Dq Li AUTO . .It Va stf_interface_ipv6_slaid .Pq Vt str IPv6 Site Level Aggregator for .Xr stf 4 . .It Va ipv6_faith_prefix .Pq Vt str If not set to .Dq Li NO , this is the faith prefix to enable a FAITH IPv6-to-IPv4 TCP translator. You also need .Xr faithd 8 setup. .It Va ipv6_ipv4mapping .Pq Vt bool If set to .Dq Li YES this enables IPv4 mapped IPv6 address communication (like .Li ::ffff:a.b.c.d ) . .It Va atm_enable .Pq Vt bool Set to .Dq Li YES to enable the configuration of ATM interfaces at system boot time. For all of the ATM variables described below, please refer to the .Xr atm 8 manual page for further details on the available command parameters. Also refer to the files in .Pa /usr/share/examples/atm for more detailed configuration information. .It Va atm_load .Pq Vt str This is a list of physical ATM interface drivers to load. Typical values are .Dq Li hfa_pci and/or .Dq Li hea_pci . .It Va atm_netif_ Ns Aq Ar intf .Pq Vt str For the ATM physical interface .Ar intf , this variable defines the name prefix and count for the ATM network interfaces to be created. The value will be passed as the parameters of an .Dq Nm atm Cm "set netif" Ar intf command. .It Va atm_sigmgr_ Ns Aq Ar intf .Pq Vt str For the ATM physical interface .Ar intf , this variable defines the ATM signalling manager to be used. The value will be passed as the parameters of an .Dq Nm atm Cm attach Ar intf command. .It Va atm_prefix_ Ns Aq Ar intf .Pq Vt str For the ATM physical interface .Ar intf , this variable defines the NSAP prefix for interfaces using a UNI signalling manager. If set to .Dq Li ILMI , the prefix will automatically be set via the .Xr ilmid 8 daemon. Otherwise, the value will be passed as the parameters of an .Dq Nm atm Cm "set prefix" Ar intf command. .It Va atm_macaddr_ Ns Aq Ar intf .Pq Vt str For the ATM physical interface .Ar intf , this variable defines the MAC address for interfaces using a UNI signalling manager. If set to .Dq Li NO , the hardware MAC address contained in the ATM interface card will be used. Otherwise, the value will be passed as the parameters of an .Dq Nm atm Cm "set mac" Ar intf command. .It Va atm_arpserver_ Ns Aq Ar netif .Pq Vt str For the ATM network interface .Ar netif , this variable defines the ATM address for a host which is to provide ATMARP service. This variable is only applicable to interfaces using a UNI signalling manager. If set to .Dq Li local , this host will become an ATMARP server. The value will be passed as the parameters of an .Dq Nm atm Cm "set arpserver" Ar netif command. .It Va atm_scsparp_ Ns Aq Ar netif .Pq Vt bool If set to .Dq Li YES , SCSP/ATMARP service for the network interface .Ar netif will be initiated using the .Xr scspd 8 and .Xr atmarpd 8 daemons. This variable is only applicable if .Va atm_arpserver_ Ns Aq Ar netif is set to .Dq Li local . .It Va atm_pvcs .Pq Vt str Set to the list of ATM PVCs to be added at system boot time. For each whitespace separated .Ar element in the value, an .Va atm_pvc_ Ns Aq Ar element variable is assumed to exist. The value of each of these variables will be passed as the parameters of an .Dq Nm atm Cm "add pvc" command. .It Va atm_arps .Pq Vt str Set to the list of permanent ATM ARP entries to be added at system boot time. For each whitespace separated .Ar element in the value, an .Va atm_arp_ Ns Aq Ar element variable is assumed to exist. The value of each of these variables will be passed as the parameters of an .Dq Nm atm Cm "add arp" command. .It Va natm_interfaces .Pq Vt str Set to the list of .Xr natm 4 interfaces that will also be used for HARP through .Xr harp 4 . If this list is not empty all interfaces in the list will be brought up with .Xr ifconfig 8 and .Xr harp 4 will be loaded. For this to work the interface drivers must be either compiled into the kernel or must reside on the root partition. .It Va keybell .Pq Vt str The keyboard bell sound. Set to .Dq Li normal , .Dq Li visual , .Dq Li off , or .Dq Li NO if the default behavior is desired. For details, refer to the .Xr kbdcontrol 1 manpage. .It Va keyboard .Pq Vt str If set to a non-null string, the virtual console's keyboard input is set to this device. .It Va keymap .Pq Vt str If set to .Dq Li NO , no keymap is installed, otherwise the value is used to install the keymap file in .Pa /usr/share/syscons/keymaps/ Ns Ao Ar value Ac Ns Pa .kbd . .It Va keyrate .Pq Vt str The keyboard repeat speed. Set to .Dq Li slow , .Dq Li normal , .Dq Li fast , or .Dq Li NO if the default behavior is desired. .It Va keychange .Pq Vt str If not set to .Dq Li NO , attempt to program the function keys with the value. The value should be a single string of the form: .Dq Ar funkey_number new_value Op Ar funkey_number new_value ... . .It Va cursor .Pq Vt str Can be set to the value of .Dq Li normal , .Dq Li blink , .Dq Li destructive , or .Dq Li NO to set the cursor behavior explicitly or choose the default behavior. .It Va scrnmap .Pq Vt str If set to .Dq Li NO , no screen map is installed, otherwise the value is used to install the screen map file in .Pa /usr/share/syscons/scrnmaps/ Ns Aq Ar value . .It Va font8x16 .Pq Vt str If set to .Dq Li NO , the default 8x16 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value is used. .It Va font8x14 .Pq Vt str If set to .Dq Li NO , the default 8x14 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value is used. .It Va font8x8 .Pq Vt str If set to .Dq Li NO , the default 8x8 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value is used. .It Va blanktime .Pq Vt int If set to .Dq Li NO , the default screen blanking interval is used, otherwise it is set to .Ar value seconds. .It Va saver .Pq Vt str If not set to .Dq Li NO , this is the actual screen saver to use .Li ( blank , snake , daemon , etc). .It Va moused_nondefault_enable .Pq Vt str If set to .Dq Li NO , the mouse device specified on the command line is not automatically treated as enabled by the .Pa /etc/rc.d/moused script. Having this variable set to .Dq Li YES allows a .Xr usb 4 mouse, for example, to be enabled as soon as it is plugged in. .It Va moused_enable .Pq Vt str If set to .Dq Li YES , the .Xr moused 8 daemon is started for doing cut/paste selection on the console. .It Va moused_type .Pq Vt str This is the protocol type of the mouse connected to this host. This variable must be set if .Va moused_enable is set to .Dq Li YES . The .Xr moused 8 daemon is able to detect the appropriate mouse type automatically in many cases. Set this variable to .Dq Li auto to let the daemon detect it, or select one from the following list if the automatic detection fails. .Pp If the mouse is attached to the PS/2 mouse port, choose .Dq Li auto or .Dq Li ps/2 , regardless of the brand and model of the mouse. Likewise, if the mouse is attached to the bus mouse port, choose .Dq Li auto or .Dq Li busmouse . All other protocols are for serial mice and will not work with the PS/2 and bus mice. If this is a USB mouse, .Dq Li auto is the only protocol type which will work. .Pp .Bl -tag -width ".Li x10mouseremote" -compact .It Li microsoft Microsoft mouse (serial) .It Li intellimouse Microsoft IntelliMouse (serial) .It Li mousesystems Mouse systems Corp.\& mouse (serial) .It Li mmseries MM Series mouse (serial) .It Li logitech Logitech mouse (serial) .It Li busmouse A bus mouse .It Li mouseman Logitech MouseMan and TrackMan (serial) .It Li glidepoint ALPS GlidePoint (serial) .It Li thinkingmouse Kensington ThinkingMouse (serial) .It Li ps/2 PS/2 mouse .It Li mmhittab MM HitTablet (serial) .It Li x10mouseremote X10 MouseRemote (serial) .It Li versapad Interlink VersaPad (serial) .El .Pp Even if the mouse is not in the above list, it may be compatible with one in the list. Refer to the manual page for .Xr moused 8 for compatibility information. .Pp It should also be noted that while this is enabled, any other client of the mouse (such as an X server) should access the mouse through the virtual mouse device, .Pa /dev/sysmouse , and configure it as a .Dq Li sysmouse type mouse, since all mouse data is converted to this single canonical format when using .Xr moused 8 . If the client program does not support the .Dq Li sysmouse type, specify the .Dq Li mousesystems type. It is the second preferred type. .It Va moused_port .Pq Vt str If .Va moused_enable is set to .Dq Li YES , this is the actual port the mouse is on. It might be .Pa /dev/cuad0 for a COM1 serial mouse, .Pa /dev/psm0 for a PS/2 mouse or .Pa /dev/mse0 for a bus mouse, for example. .It Va moused_flags .Pq Vt str If .Va moused_type is set, these are the additional flags to pass to the .Xr moused 8 daemon. .It Va mousechar_start .Pq Vt int If set to .Dq Li NO , the default mouse cursor character range .Li 0xd0 Ns - Ns Li 0xd3 is used, otherwise the range start is set to .Ar value character, see .Xr vidcontrol 1 . Use if the default range is occupied in the language code table. .It Va allscreens_flags .Pq Vt str If set, .Xr vidcontrol 1 is run with these options for each of the virtual terminals .Pq Pa /dev/ttyv* . For example, .Dq Fl m Cm on will enable the mouse pointer on all virtual terminals if .Va moused_enable is set to .Dq Li YES . .It Va allscreens_kbdflags .Pq Vt str If set, .Xr kbdcontrol 1 is run with these options for each of the virtual terminals .Pq Pa /dev/ttyv* . For example, .Dq Fl h Li 200 will set the .Xr syscons 4 scrollback (history) buffer to 200 lines. .It Va cron_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr cron 8 daemon at system boot time. .It Va cron_program .Pq Vt str Path to .Xr cron 8 (default .Pa /usr/sbin/cron ) . .It Va cron_flags .Pq Vt str If .Va cron_enable is set to .Dq Li YES , these are the flags to pass to .Xr cron 8 . .It Va cron_dst .Pq Vt bool If set to .Dq Li YES , enable the special handling of transitions to and from the Daylight Saving Time in .Xr cron 8 (equivalent to using the flag .Fl s ) . .It Va lpd_program .Pq Vt str Path to .Xr lpd 8 (default .Pa /usr/sbin/lpd ) . .It Va lpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr lpd 8 daemon at system boot time. .It Va lpd_flags .Pq Vt str If .Va lpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr lpd 8 daemon. .It Va chkprintcap_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr chkprintcap 8 command before starting the .Xr lpd 8 daemon. .It Va chkprintcap_flags .Pq Vt str If .Va lpd_enable and .Va chkprintcap_enable are set to .Dq Li YES , these are the flags to pass to the .Xr chkprintcap 8 program. The default is .Dq Li -d , which causes missing directories to be created. .It Va mta_start_script .Pq Vt str This variable specifies the full path to the script to run to start a mail transfer agent. The default is .Pa /etc/rc.sendmail . The .Va sendmail_* variables which .Pa /etc/rc.sendmail uses are documented in the .Xr rc.sendmail 8 manual page. .It Va dumpdev .Pq Vt str Indicates the device (usually a swap partition) to which a crash dump should be written in the event of a system crash. If the value of this variable is .Dq Li AUTO , the first suitable swap device listed in .Pa /etc/fstab will be used as dump device. Otherwise, the value of this variable is passed as the argument to .Xr dumpon 8 . To disable crash dumps, set this variable to .Dq Li NO . .It Va dumpdir .Pq Vt str When the system reboots after a crash and a crash dump is found on the device specified by the .Va dumpdev variable, .Xr savecore 8 will save that crash dump and a copy of the kernel to the directory specified by the .Va dumpdir variable. The default value is .Pa /var/crash . Set to .Dq Li NO to not run .Xr savecore 8 at boot time when .Va dumpdir is set. .It Va savecore_flags .Pq Vt str If crash dumps are enabled, these are the flags to pass to the .Xr savecore 8 utility. .It Va enable_quotas .Pq Vt bool Set to .Dq Li YES to turn on user disk quotas on system startup via the .Xr quotaon 8 command. .It Va check_quotas .Pq Vt bool Set to .Dq Li YES to enable user disk quota checking via the .Xr quotacheck 8 command. .It Va accounting_enable .Pq Vt bool Set to .Dq Li YES to enable system accounting through the .Xr accton 8 facility. .It Va ibcs2_enable .Pq Vt bool Set to .Dq Li YES to enable iBCS2 (SCO) binary emulation at system initial boot time. .It Va ibcs2_loaders .Pq Vt str If not set to .Dq Li NO and if .Va ibcs2_enable is set to .Dq Li YES , this specifies a list of additional iBCS2 loaders to enable. .It Va linux_enable .Pq Vt bool Set to .Dq Li YES to enable Linux/ELF binary emulation at system initial boot time. .It Va osf1_enable .Pq Vt bool Set to .Dq Li YES to enable OSF/1 (Digital UNIX) binary emulation at system initial boot time. (alpha) .It Va svr4_enable .Pq Vt bool If set to .Dq Li YES , enable SysVR4 emulation at boot time. .It Va sysvipc_enable .Pq Vt bool If set to .Dq Li YES , load System V IPC primitives at boot time. .It Va clear_tmp_enable .Pq Vt bool Set to .Dq Li YES to have .Pa /tmp cleaned at startup. .It Va ldconfig_paths .Pq Vt str Set to the list of shared library paths to use with .Xr ldconfig 8 . NOTE: .Pa /usr/lib will always be added first, so it need not appear in this list. .It Va ldconfig_paths_aout .Pq Vt str Set to the list of shared library paths to use with .Xr ldconfig 8 legacy .Xr a.out 5 support. .It Va ldconfig_insecure .Pq Vt bool The .Xr ldconfig 8 utility normally refuses to use directories which are writable by anyone except root. Set this variable to .Dq Li YES to disable that security check during system startup. .It Va kern_securelevel_enable .Pq Vt bool Set to .Dq Li YES to set the kernel security level at system startup. .It Va kern_securelevel .Pq Vt int The kernel security level to set at startup. The allowed range of .Ar value ranges from \-1 (the compile time default) to 3 (the most secure). See .Xr init 8 for the list of possible security levels and their effect on system operation. .It Va sshd_program .Pq Vt str Path to the SSH server program .Pa ( /usr/sbin/sshd is the default). .It Va sshd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr sshd 8 at system boot time. .It Va sshd_flags .Pq Vt str If .Va sshd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr sshd 8 daemon. .It Va usbd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr usbd 8 daemon at boot time. .It Va usbd_flags .Pq Vt str If .Va usbd_enable is set to .Dq Li YES , these are the flags passed to the .Xr usbd 8 daemon. .It Va watchdogd_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr watchdogd 8 daemon at boot time. This requires that the kernel have been compiled with a .Xr watchdog 4 compatible device. .It Va watchdogd_flags .Pq Vt str If .Va watchdogd_enable is set to .Dq Li YES , these are the flags passed to the .Xr watchdogd 8 daemon. .It Va performance_cx_lowest .Pq Vt str CPU idle state to use while on AC power. The string .Dq Li LOW indicates that .Xr acpi 4 should use the lowest power state available while .Dq Li HIGH indicates that the lowest latency state (less power savings) should be used. .It Va performance_cpu_freq .Pq Vt str CPU clock frequency to use while on AC power. The string .Dq Li LOW indicates that .Xr cpufreq 4 should use the lowest frequency available while .Dq Li HIGH indicates that the highest frequency (less power savings) should be used. .It Va economy_cx_lowest .Pq Vt str CPU idle state to use when off AC power. The string .Dq Li LOW indicates that .Xr acpi 4 should use the lowest power state available while .Dq Li HIGH indicates that the lowest latency state (less power savings) should be used. .It Va economy_cpu_freq .Pq Vt str CPU clock frequency to use when off AC power. The string .Dq Li LOW indicates that .Xr cpufreq 4 should use the lowest frequency available while .Dq Li HIGH indicates that the highest frequency (less power savings) should be used. .It Va jail_enable .Pq Vt bool If set to .Dq Li NO , any configured jails will not be started. .It Va jail_list .Pq Vt str A space separated list of names for jails. This is purely a configuration aid to help identify and configure multiple jails. The names specified in this list will be used to identify settings common to an instance of a jail. Assuming that the jail in question was named .Li vjail , you would have the following dependant variables: .Bd -literal jail_vjail_hostname="jail.example.com" jail_vjail_ip="192.168.1.100" jail_vjail_rootdir="/var/jails/vjail/root" jail_vjail_exec="/bin/sh /etc/rc" .Ed .Pp The last one is optional. It defaults to .Pa /etc/rc if it is not set. .It Va jail_set_hostname_allow .Pq Vt bool If set to .Dq Li NO , do not allow the root user in a jail to set its hostname. .It Va jail_socket_unixiproute_only .Pq Vt bool If set to .Dq Li NO , do not allow any protocol, besides TCP/IP, to be used within a jail. .It Va jail_sysvipc_allow .Pq Vt bool If set to .Dq Li YES , allow applications within a jail to use System V IPC. .It Va unaligned_print .Pq Vt bool If set to .Dq Li NO , unaligned access warnings will not be printed. (alpha) .\" ----- isdn settings --------------------------------- .It Va isdn_enable .Pq Vt bool Set to .Dq Li NO by default. When set to .Dq Li YES , starts the .Xr isdnd 8 daemon at system boot time. .It Va isdn_flags .Pq Vt str Set to .Dq Fl d Ns Cm n Fl d Ns Li 0x1f9 by default. Additional flags to pass to .Xr isdnd 8 (but see .Va isdn_fsdev and .Va isdn_ttype for certain tunable parameters). .It Va isdn_ttype .Pq Vt str Set to .Dq Li cons25 by default. The terminal type of the output device when .Xr isdnd 8 operates in full-screen mode. .It Va isdn_screenflags .Pq Vt str Set to .Dq Li NO by default. The video mode for full-screen mode (only for .Xr syscons 4 console driver, see .Xr vidcontrol 1 for valid modes). .It Va isdn_fsdev .Pq Vt str Set to .Dq Li NO by default. The output device for .Xr isdnd 8 in full-screen mode (or .Dq Li NO for daemon mode). .It Va isdn_trace .Pq Vt bool Set to .Dq Li NO by default. When set to .Dq Li YES , enables the ISDN protocol trace utility .Xr isdntrace 8 at system boot time. .It Va isdn_traceflags .Pq Vt str Set to .Dq Fl f Pa /var/tmp/isdntrace0 by default. Flags for .Xr isdntrace 8 . .\" ----------------------------------------------------- .It Va pcvt_verbose .Pq Vt bool Set to .Dq Li NO by default. When set to .Dq Li YES , verbose messages about the actions done by the start script are displayed. .Em Note : the .Xr pcvt 4 driver must be compiled into the kernel before the .Xr pcvt 4 related options described here take any effect. .It Va pcvt_keymap .Pq Vt str Set to .Dq Li NO by default. Use this to configure a national keyboard mapping found in the .Pa /usr/share/misc/keycap.pcvt file of keyboard mappings. (See also the manual pages .Xr keycap 5 and .Xr keycap 3 for usage of .Xr pcvt 4 Ns 's keycap database and the manual page .Xr kcon 1 option .Fl m for national keyboard mapping configuration.) .It Va pcvt_keydel .Pq Vt int Set to .Dq Li NO by default. Used to set the keyboard key repeat delay value. Valid values are in the range 0..3 for delay values of 250, 500, 750 and 1000 msec. (See also the .Xr kcon 1 manual page.) .It Va pcvt_keyrate .Pq Vt int Set to .Dq Li NO by default. Used to set the keyboard key repetition rate value. Valid values are in the range 0..31 for repetition values of 2..30 characters per second. .It Va pcvt_keyrepeat .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to enable automatic keyboard key repeating. .It Va pcvt_force24 .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to force .Xr pcvt 4 to use 24 lines only (in 25 lines mode) for compatibility with the original .Tn VT220 terminal. .It Va pcvt_hpext .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to enable the display and functionality of function key labels (as found on .Tn Hewlett-Packard terminals such as the .Tn HP2392A and the .Tn HP700/92 in .Tn ANSI mode). .It Va pcvt_lines .Pq Vt int Set to .Dq Li NO by default resulting in a value of 25. Used to set the number of lines on the screen. For VGA displays, valid values are 25, 28, 40 and 50 lines. (See also the .Xr scon 1 manual page.) .It Va pcvt_blanktime .Pq Vt int Set to .Dq Li NO by default. Used to set the screen saver timeout in seconds for values greater than zero. .It Va pcvt_cursorh .Pq Vt int Set to .Dq Li NO by default. Used to set the cursor top scanline. (See also the .Xr cursor 1 manual page.) .It Va pcvt_cursorl .Pq Vt int Set to .Dq Li NO by default. Used to set the cursor bottom scanline. .It Va pcvt_monohigh .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to set intensity to high on monochrome monitors. (See also the .Xr scon 1 manual page, option .Fl p , for more information on changing VGA palette values.) .It Va harvest_interrupt .Pq Vt bool Set to .Dq Li YES to use hardware interrupts as an entropy source. Refer to .Xr random 4 for more information. .It Va harvest_ethernet .Pq Vt bool Set to .Dq Li YES to use LAN traffic as an entropy source. Refer to .Xr random 4 for more information. .It Va harvest_p_to_p .Pq Vt bool Set to .Dq Li YES to use serial line traffic as an entropy source. Refer to .Xr random 4 for more information. .It Va entropy_dir .Pq Vt str Set to .Dq Li NO to disable caching entropy via .Xr cron 8 . Otherwise set to the directory used to store entropy files in. .It Va entropy_file .Pq Vt str Set to .Dq Li NO to disable caching entropy through reboots. Otherwise set to the filename used to store cached entropy through reboots. This file should be located on the root file system to seed the .Xr random 4 device as early as possible in the boot process. .It Va entropy_save_sz .Pq Vt int Size of the entropy cache files saved by .Nm save-entropy periodically. .It Va entropy_save_num .Pq Vt int Number of entropy cache files to save by .Nm save-entropy periodically. .It Va ipsec_enable .Pq Vt bool Set to .Dq Li YES to run .Xr setkey 8 on .Va ipsec_file at boot time. .It Va ipsec_file .Pq Vt str Configuration file for .Xr setkey 8 . .It Va dmesg_enable .Pq Vt bool Set to .Dq Li YES to save .Xr dmesg 8 to .Pa /var/run/dmesg.boot on boot. .It Va rcshutdown_timeout .Pq Vt int If set, start a watchdog timer in the background which will terminate .Pa rc.shutdown if .Xr shutdown 8 has not completed within the specified time (in seconds). Notice that in addition to this soft timeout, .Xr init 8 also applies a hard timeout for the execution of .Pa rc.shutdown . This is configured via .Xr sysctl 8 variable .Va kern.init_shutdown_timeout and defaults to 120 seconds. Setting the value of .Va rcshutdown_timeout to more than 120 seconds will have no effect until the .Xr sysctl 8 variable .Va kern.init_shutdown_timeout is also increased. .It Va virecover_enable .Pq Vt bool Set to .Dq Li NO to prevent the system from trying to recover pre-maturely terminated .Xr vi 1 sessions. .It Va ugidfw_enable .Pq Vt bool Set to .Dq Li YES to load the .Xr mac_bsdextended 4 module upon system initialization and load a default ruleset file. .It Va bsdextended_script .Pq Vt str The default .Xr mac_bsdextended 4 ruleset file to load. The default value of this variable is .Pa /etc/rc.bsdextended . .It Va newsyslog_enable .Pq Vt bool If set to .Dq Li YES , run .Xr newsyslog 8 command at startup. .It Va newsyslog_flags .Pq Vt str If .Va newsyslog_enable is set to .Dq Li YES , these are the flags to pass to the .Xr newsyslog 8 program. The default is .Dq Li -CN , which causes log files flagged with a .Cm C to be created. .It Va ramdisk_units .Pq Vt str A list of one or more ramdisk units to configure with .Xr mdconfig 8 and .Xr newfs 8 in time to be mounted from .Xr fstab 5 . Each listed unit .Ar X must specify at least a .Ar type in a .Va ramdisk_ Ns Ao Ar X Ac Ns Va _config variable. .It Va ramdisk_ Ns Ao Ar X Ac Ns Va _config .Pq Vt str Arguments to .Xr mdconfig 8 for ramdisk .Ar X . At minimum a .Fl t Ar type must be specified, where .Ar type must be one of .Cm malloc or .Cm swap . .It Va ramdisk_ Ns Ao Ar X Ac Ns Va _newfs .Pq Vt str Optional arguments passed to .Xr newfs 8 to initialize ramdisk .Ar X . .It Va ramdisk_ Ns Ao Ar X Ac Ns Va _owner .Pq Vt str An ownership specification passed to .Xr chown 8 after the specified ramdisk unit .Ar X has been mounted. Both the .Xr md 4 device and the mount point will be changed. .It Va ramdisk_ Ns Ao Ar X Ac Ns Va _perms .Pq Vt str A mode string passed to .Xr chmod 1 after the specified ramdisk unit .Ar X has been mounted. Both the .Xr md 4 device and the mount point will be changed. .El .Sh FILES .Bl -tag -width ".Pa /etc/defaults/rc.conf" -compact .It Pa /etc/defaults/rc.conf .It Pa /etc/rc.conf .It Pa /etc/rc.conf.local .El .Sh SEE ALSO .Xr catman 1 , .Xr chmod 1 , .Xr gdb 1 , .Xr info 1 , .Xr kbdcontrol 1 , .Xr makewhatis 1 , .Xr vi 1 , .Xr vidcontrol 1 , .Xr ip 4 , .Xr ipf 4 , .Xr ipfw 4 , .Xr ipnat 4 , .Xr kld 4 , .Xr pf 4 , .Xr pflog 4 , +.Xr pfsync 4 , .Xr tcp 4 , .Xr udp 4 , .Xr exports 5 , .Xr ipf 5 , .Xr ipnat 5 , .Xr motd 5 , .Xr newsyslog.conf 5 , .Xr pf.conf 5 , .Xr accton 8 , .Xr amd 8 , .Xr apm 8 , .Xr atm 8 , .Xr chkprintcap 8 , .Xr chown 8 , .Xr cron 8 , .Xr dhclient 8 , .Xr ifconfig 8 , .Xr inetd 8 , .Xr ipf 8 , .Xr ipfw 8 , .Xr ipnat 8 , .Xr isdnd 8 , .Xr isdntrace 8 , .Xr kldxref 8 , .Xr lpd 8 , .Xr mdconfig 8 , .Xr mdmfs 8 , .Xr mountd 8 , .Xr moused 8 , .Xr mrouted 8 , .Xr named 8 , .Xr newfs 8 , .Xr newsyslog 8 , .Xr nfsd 8 , .Xr ntpd 8 , .Xr ntpdate 8 , .Xr pcnfsd 8 , .Xr pfctl 8 , .Xr pflogd 8 , .Xr powerd 8 , .Xr quotacheck 8 , .Xr quotaon 8 , .Xr rc 8 , .Xr rc.sendmail 8 , .Xr route 8 , .Xr routed 8 , .Xr rpcbind 8 , .Xr rpc.lockd 8 , .Xr rpc.statd 8 , .Xr rwhod 8 , .Xr savecore 8 , .Xr sshd 8 , .Xr swapon 8 , .Xr sysctl 8 , .Xr syslogd 8 , .Xr timed 8 , .Xr usbd 8 , .Xr yp 8 , .Xr ypbind 8 , .Xr ypserv 8 , .Xr ypset 8 .Sh HISTORY The .Nm file appeared in .Fx 2.2.2 . .Sh AUTHORS .An Jordan K. Hubbard .