diff --git a/cmd/ztest.c b/cmd/ztest.c index f77a37c21545..3775e2ef2516 100644 --- a/cmd/ztest.c +++ b/cmd/ztest.c @@ -1,9034 +1,9041 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2013 Steven Hartland. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2017 Joyent, Inc. * Copyright (c) 2017, Intel Corporation. */ /* * The objective of this program is to provide a DMU/ZAP/SPA stress test * that runs entirely in userland, is easy to use, and easy to extend. * * The overall design of the ztest program is as follows: * * (1) For each major functional area (e.g. adding vdevs to a pool, * creating and destroying datasets, reading and writing objects, etc) * we have a simple routine to test that functionality. These * individual routines do not have to do anything "stressful". * * (2) We turn these simple functionality tests into a stress test by * running them all in parallel, with as many threads as desired, * and spread across as many datasets, objects, and vdevs as desired. * * (3) While all this is happening, we inject faults into the pool to * verify that self-healing data really works. * * (4) Every time we open a dataset, we change its checksum and compression * functions. Thus even individual objects vary from block to block * in which checksum they use and whether they're compressed. * * (5) To verify that we never lose on-disk consistency after a crash, * we run the entire test in a child of the main process. * At random times, the child self-immolates with a SIGKILL. * This is the software equivalent of pulling the power cord. * The parent then runs the test again, using the existing * storage pool, as many times as desired. If backwards compatibility * testing is enabled ztest will sometimes run the "older" version * of ztest after a SIGKILL. * * (6) To verify that we don't have future leaks or temporal incursions, * many of the functional tests record the transaction group number * as part of their data. When reading old data, they verify that * the transaction group number is less than the current, open txg. * If you add a new test, please do this if applicable. * * (7) Threads are created with a reduced stack size, for sanity checking. * Therefore, it's important not to allocate huge buffers on the stack. * * When run with no arguments, ztest runs for about five minutes and * produces no output if successful. To get a little bit of information, * specify -V. To get more information, specify -VV, and so on. * * To turn this into an overnight stress test, use -T to specify run time. * * You can ask more vdevs [-v], datasets [-d], or threads [-t] * to increase the pool capacity, fanout, and overall stress level. * * Use the -k option to set the desired frequency of kills. * * When ztest invokes itself it passes all relevant information through a * temporary file which is mmap-ed in the child process. This allows shared * memory to survive the exec syscall. The ztest_shared_hdr_t struct is always * stored at offset 0 of this file and contains information on the size and * number of shared structures in the file. The information stored in this file * must remain backwards compatible with older versions of ztest so that * ztest can invoke them during backwards compatibility testing (-B). */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int ztest_fd_data = -1; static int ztest_fd_rand = -1; typedef struct ztest_shared_hdr { uint64_t zh_hdr_size; uint64_t zh_opts_size; uint64_t zh_size; uint64_t zh_stats_size; uint64_t zh_stats_count; uint64_t zh_ds_size; uint64_t zh_ds_count; uint64_t zh_scratch_state_size; } ztest_shared_hdr_t; static ztest_shared_hdr_t *ztest_shared_hdr; enum ztest_class_state { ZTEST_VDEV_CLASS_OFF, ZTEST_VDEV_CLASS_ON, ZTEST_VDEV_CLASS_RND }; /* Dedicated RAIDZ Expansion test states */ typedef enum { RAIDZ_EXPAND_NONE, /* Default is none, must opt-in */ RAIDZ_EXPAND_REQUESTED, /* The '-X' option was used */ RAIDZ_EXPAND_STARTED, /* Testing has commenced */ RAIDZ_EXPAND_KILLED, /* Reached the proccess kill */ RAIDZ_EXPAND_CHECKED, /* Pool scrub verification done */ } raidz_expand_test_state_t; #define ZO_GVARS_MAX_ARGLEN ((size_t)64) #define ZO_GVARS_MAX_COUNT ((size_t)10) typedef struct ztest_shared_opts { char zo_pool[ZFS_MAX_DATASET_NAME_LEN]; char zo_dir[ZFS_MAX_DATASET_NAME_LEN]; char zo_alt_ztest[MAXNAMELEN]; char zo_alt_libpath[MAXNAMELEN]; uint64_t zo_vdevs; uint64_t zo_vdevtime; size_t zo_vdev_size; int zo_ashift; int zo_mirrors; int zo_raid_do_expand; int zo_raid_children; int zo_raid_parity; char zo_raid_type[8]; int zo_draid_data; int zo_draid_spares; int zo_datasets; int zo_threads; uint64_t zo_passtime; uint64_t zo_killrate; int zo_verbose; int zo_init; uint64_t zo_time; uint64_t zo_maxloops; uint64_t zo_metaslab_force_ganging; raidz_expand_test_state_t zo_raidz_expand_test; int zo_mmp_test; int zo_special_vdevs; int zo_dump_dbgmsg; int zo_gvars_count; char zo_gvars[ZO_GVARS_MAX_COUNT][ZO_GVARS_MAX_ARGLEN]; } ztest_shared_opts_t; /* Default values for command line options. */ #define DEFAULT_POOL "ztest" #define DEFAULT_VDEV_DIR "/tmp" #define DEFAULT_VDEV_COUNT 5 #define DEFAULT_VDEV_SIZE (SPA_MINDEVSIZE * 4) /* 256m default size */ #define DEFAULT_VDEV_SIZE_STR "256M" #define DEFAULT_ASHIFT SPA_MINBLOCKSHIFT #define DEFAULT_MIRRORS 2 #define DEFAULT_RAID_CHILDREN 4 #define DEFAULT_RAID_PARITY 1 #define DEFAULT_DRAID_DATA 4 #define DEFAULT_DRAID_SPARES 1 #define DEFAULT_DATASETS_COUNT 7 #define DEFAULT_THREADS 23 #define DEFAULT_RUN_TIME 300 /* 300 seconds */ #define DEFAULT_RUN_TIME_STR "300 sec" #define DEFAULT_PASS_TIME 60 /* 60 seconds */ #define DEFAULT_PASS_TIME_STR "60 sec" #define DEFAULT_KILL_RATE 70 /* 70% kill rate */ #define DEFAULT_KILLRATE_STR "70%" #define DEFAULT_INITS 1 #define DEFAULT_MAX_LOOPS 50 /* 5 minutes */ #define DEFAULT_FORCE_GANGING (64 << 10) #define DEFAULT_FORCE_GANGING_STR "64K" /* Simplifying assumption: -1 is not a valid default. */ #define NO_DEFAULT -1 static const ztest_shared_opts_t ztest_opts_defaults = { .zo_pool = DEFAULT_POOL, .zo_dir = DEFAULT_VDEV_DIR, .zo_alt_ztest = { '\0' }, .zo_alt_libpath = { '\0' }, .zo_vdevs = DEFAULT_VDEV_COUNT, .zo_ashift = DEFAULT_ASHIFT, .zo_mirrors = DEFAULT_MIRRORS, .zo_raid_children = DEFAULT_RAID_CHILDREN, .zo_raid_parity = DEFAULT_RAID_PARITY, .zo_raid_type = VDEV_TYPE_RAIDZ, .zo_vdev_size = DEFAULT_VDEV_SIZE, .zo_draid_data = DEFAULT_DRAID_DATA, /* data drives */ .zo_draid_spares = DEFAULT_DRAID_SPARES, /* distributed spares */ .zo_datasets = DEFAULT_DATASETS_COUNT, .zo_threads = DEFAULT_THREADS, .zo_passtime = DEFAULT_PASS_TIME, .zo_killrate = DEFAULT_KILL_RATE, .zo_verbose = 0, .zo_mmp_test = 0, .zo_init = DEFAULT_INITS, .zo_time = DEFAULT_RUN_TIME, .zo_maxloops = DEFAULT_MAX_LOOPS, /* max loops during spa_freeze() */ .zo_metaslab_force_ganging = DEFAULT_FORCE_GANGING, .zo_special_vdevs = ZTEST_VDEV_CLASS_RND, .zo_gvars_count = 0, .zo_raidz_expand_test = RAIDZ_EXPAND_NONE, }; extern uint64_t metaslab_force_ganging; extern uint64_t metaslab_df_alloc_threshold; extern uint64_t zfs_deadman_synctime_ms; extern uint_t metaslab_preload_limit; extern int zfs_compressed_arc_enabled; extern int zfs_abd_scatter_enabled; extern uint_t dmu_object_alloc_chunk_shift; extern boolean_t zfs_force_some_double_word_sm_entries; extern unsigned long zio_decompress_fail_fraction; extern unsigned long zfs_reconstruct_indirect_damage_fraction; extern uint64_t raidz_expand_max_reflow_bytes; extern uint_t raidz_expand_pause_point; static ztest_shared_opts_t *ztest_shared_opts; static ztest_shared_opts_t ztest_opts; static const char *const ztest_wkeydata = "abcdefghijklmnopqrstuvwxyz012345"; typedef struct ztest_shared_ds { uint64_t zd_seq; } ztest_shared_ds_t; static ztest_shared_ds_t *ztest_shared_ds; #define ZTEST_GET_SHARED_DS(d) (&ztest_shared_ds[d]) typedef struct ztest_scratch_state { uint64_t zs_raidz_scratch_verify_pause; } ztest_shared_scratch_state_t; static ztest_shared_scratch_state_t *ztest_scratch_state; #define BT_MAGIC 0x123456789abcdefULL #define MAXFAULTS(zs) \ (MAX((zs)->zs_mirrors, 1) * (ztest_opts.zo_raid_parity + 1) - 1) enum ztest_io_type { ZTEST_IO_WRITE_TAG, ZTEST_IO_WRITE_PATTERN, ZTEST_IO_WRITE_ZEROES, ZTEST_IO_TRUNCATE, ZTEST_IO_SETATTR, ZTEST_IO_REWRITE, ZTEST_IO_TYPES }; typedef struct ztest_block_tag { uint64_t bt_magic; uint64_t bt_objset; uint64_t bt_object; uint64_t bt_dnodesize; uint64_t bt_offset; uint64_t bt_gen; uint64_t bt_txg; uint64_t bt_crtxg; } ztest_block_tag_t; typedef struct bufwad { uint64_t bw_index; uint64_t bw_txg; uint64_t bw_data; } bufwad_t; /* * It would be better to use a rangelock_t per object. Unfortunately * the rangelock_t is not a drop-in replacement for rl_t, because we * still need to map from object ID to rangelock_t. */ typedef enum { ZTRL_READER, ZTRL_WRITER, ZTRL_APPEND } rl_type_t; typedef struct rll { void *rll_writer; int rll_readers; kmutex_t rll_lock; kcondvar_t rll_cv; } rll_t; typedef struct rl { uint64_t rl_object; uint64_t rl_offset; uint64_t rl_size; rll_t *rl_lock; } rl_t; #define ZTEST_RANGE_LOCKS 64 #define ZTEST_OBJECT_LOCKS 64 /* * Object descriptor. Used as a template for object lookup/create/remove. */ typedef struct ztest_od { uint64_t od_dir; uint64_t od_object; dmu_object_type_t od_type; dmu_object_type_t od_crtype; uint64_t od_blocksize; uint64_t od_crblocksize; uint64_t od_crdnodesize; uint64_t od_gen; uint64_t od_crgen; char od_name[ZFS_MAX_DATASET_NAME_LEN]; } ztest_od_t; /* * Per-dataset state. */ typedef struct ztest_ds { ztest_shared_ds_t *zd_shared; objset_t *zd_os; pthread_rwlock_t zd_zilog_lock; zilog_t *zd_zilog; ztest_od_t *zd_od; /* debugging aid */ char zd_name[ZFS_MAX_DATASET_NAME_LEN]; kmutex_t zd_dirobj_lock; rll_t zd_object_lock[ZTEST_OBJECT_LOCKS]; rll_t zd_range_lock[ZTEST_RANGE_LOCKS]; } ztest_ds_t; /* * Per-iteration state. */ typedef void ztest_func_t(ztest_ds_t *zd, uint64_t id); typedef struct ztest_info { ztest_func_t *zi_func; /* test function */ uint64_t zi_iters; /* iterations per execution */ uint64_t *zi_interval; /* execute every seconds */ const char *zi_funcname; /* name of test function */ } ztest_info_t; typedef struct ztest_shared_callstate { uint64_t zc_count; /* per-pass count */ uint64_t zc_time; /* per-pass time */ uint64_t zc_next; /* next time to call this function */ } ztest_shared_callstate_t; static ztest_shared_callstate_t *ztest_shared_callstate; #define ZTEST_GET_SHARED_CALLSTATE(c) (&ztest_shared_callstate[c]) ztest_func_t ztest_dmu_read_write; ztest_func_t ztest_dmu_write_parallel; ztest_func_t ztest_dmu_object_alloc_free; ztest_func_t ztest_dmu_object_next_chunk; ztest_func_t ztest_dmu_commit_callbacks; ztest_func_t ztest_zap; ztest_func_t ztest_zap_parallel; ztest_func_t ztest_zil_commit; ztest_func_t ztest_zil_remount; ztest_func_t ztest_dmu_read_write_zcopy; ztest_func_t ztest_dmu_objset_create_destroy; ztest_func_t ztest_dmu_prealloc; ztest_func_t ztest_fzap; ztest_func_t ztest_dmu_snapshot_create_destroy; ztest_func_t ztest_dsl_prop_get_set; ztest_func_t ztest_spa_prop_get_set; ztest_func_t ztest_spa_create_destroy; ztest_func_t ztest_fault_inject; ztest_func_t ztest_dmu_snapshot_hold; ztest_func_t ztest_mmp_enable_disable; ztest_func_t ztest_scrub; ztest_func_t ztest_dsl_dataset_promote_busy; ztest_func_t ztest_vdev_attach_detach; ztest_func_t ztest_vdev_raidz_attach; ztest_func_t ztest_vdev_LUN_growth; ztest_func_t ztest_vdev_add_remove; ztest_func_t ztest_vdev_class_add; ztest_func_t ztest_vdev_aux_add_remove; ztest_func_t ztest_split_pool; ztest_func_t ztest_reguid; ztest_func_t ztest_spa_upgrade; ztest_func_t ztest_device_removal; ztest_func_t ztest_spa_checkpoint_create_discard; ztest_func_t ztest_initialize; ztest_func_t ztest_trim; ztest_func_t ztest_blake3; ztest_func_t ztest_fletcher; ztest_func_t ztest_fletcher_incr; ztest_func_t ztest_verify_dnode_bt; static uint64_t zopt_always = 0ULL * NANOSEC; /* all the time */ static uint64_t zopt_incessant = 1ULL * NANOSEC / 10; /* every 1/10 second */ static uint64_t zopt_often = 1ULL * NANOSEC; /* every second */ static uint64_t zopt_sometimes = 10ULL * NANOSEC; /* every 10 seconds */ static uint64_t zopt_rarely = 60ULL * NANOSEC; /* every 60 seconds */ #define ZTI_INIT(func, iters, interval) \ { .zi_func = (func), \ .zi_iters = (iters), \ .zi_interval = (interval), \ .zi_funcname = # func } static ztest_info_t ztest_info[] = { ZTI_INIT(ztest_dmu_read_write, 1, &zopt_always), ZTI_INIT(ztest_dmu_write_parallel, 10, &zopt_always), ZTI_INIT(ztest_dmu_object_alloc_free, 1, &zopt_always), ZTI_INIT(ztest_dmu_object_next_chunk, 1, &zopt_sometimes), ZTI_INIT(ztest_dmu_commit_callbacks, 1, &zopt_always), ZTI_INIT(ztest_zap, 30, &zopt_always), ZTI_INIT(ztest_zap_parallel, 100, &zopt_always), ZTI_INIT(ztest_split_pool, 1, &zopt_sometimes), ZTI_INIT(ztest_zil_commit, 1, &zopt_incessant), ZTI_INIT(ztest_zil_remount, 1, &zopt_sometimes), ZTI_INIT(ztest_dmu_read_write_zcopy, 1, &zopt_often), ZTI_INIT(ztest_dmu_objset_create_destroy, 1, &zopt_often), ZTI_INIT(ztest_dsl_prop_get_set, 1, &zopt_often), ZTI_INIT(ztest_spa_prop_get_set, 1, &zopt_sometimes), #if 0 ZTI_INIT(ztest_dmu_prealloc, 1, &zopt_sometimes), #endif ZTI_INIT(ztest_fzap, 1, &zopt_sometimes), ZTI_INIT(ztest_dmu_snapshot_create_destroy, 1, &zopt_sometimes), ZTI_INIT(ztest_spa_create_destroy, 1, &zopt_sometimes), ZTI_INIT(ztest_fault_inject, 1, &zopt_sometimes), ZTI_INIT(ztest_dmu_snapshot_hold, 1, &zopt_sometimes), ZTI_INIT(ztest_mmp_enable_disable, 1, &zopt_sometimes), ZTI_INIT(ztest_reguid, 1, &zopt_rarely), ZTI_INIT(ztest_scrub, 1, &zopt_rarely), ZTI_INIT(ztest_spa_upgrade, 1, &zopt_rarely), ZTI_INIT(ztest_dsl_dataset_promote_busy, 1, &zopt_rarely), ZTI_INIT(ztest_vdev_attach_detach, 1, &zopt_sometimes), ZTI_INIT(ztest_vdev_raidz_attach, 1, &zopt_sometimes), ZTI_INIT(ztest_vdev_LUN_growth, 1, &zopt_rarely), ZTI_INIT(ztest_vdev_add_remove, 1, &ztest_opts.zo_vdevtime), ZTI_INIT(ztest_vdev_class_add, 1, &ztest_opts.zo_vdevtime), ZTI_INIT(ztest_vdev_aux_add_remove, 1, &ztest_opts.zo_vdevtime), ZTI_INIT(ztest_device_removal, 1, &zopt_sometimes), ZTI_INIT(ztest_spa_checkpoint_create_discard, 1, &zopt_rarely), ZTI_INIT(ztest_initialize, 1, &zopt_sometimes), ZTI_INIT(ztest_trim, 1, &zopt_sometimes), ZTI_INIT(ztest_blake3, 1, &zopt_rarely), ZTI_INIT(ztest_fletcher, 1, &zopt_rarely), ZTI_INIT(ztest_fletcher_incr, 1, &zopt_rarely), ZTI_INIT(ztest_verify_dnode_bt, 1, &zopt_sometimes), }; #define ZTEST_FUNCS (sizeof (ztest_info) / sizeof (ztest_info_t)) /* * The following struct is used to hold a list of uncalled commit callbacks. * The callbacks are ordered by txg number. */ typedef struct ztest_cb_list { kmutex_t zcl_callbacks_lock; list_t zcl_callbacks; } ztest_cb_list_t; /* * Stuff we need to share writably between parent and child. */ typedef struct ztest_shared { boolean_t zs_do_init; hrtime_t zs_proc_start; hrtime_t zs_proc_stop; hrtime_t zs_thread_start; hrtime_t zs_thread_stop; hrtime_t zs_thread_kill; uint64_t zs_enospc_count; uint64_t zs_vdev_next_leaf; uint64_t zs_vdev_aux; uint64_t zs_alloc; uint64_t zs_space; uint64_t zs_splits; uint64_t zs_mirrors; uint64_t zs_metaslab_sz; uint64_t zs_metaslab_df_alloc_threshold; uint64_t zs_guid; } ztest_shared_t; #define ID_PARALLEL -1ULL static char ztest_dev_template[] = "%s/%s.%llua"; static char ztest_aux_template[] = "%s/%s.%s.%llu"; static ztest_shared_t *ztest_shared; static spa_t *ztest_spa = NULL; static ztest_ds_t *ztest_ds; static kmutex_t ztest_vdev_lock; static boolean_t ztest_device_removal_active = B_FALSE; static boolean_t ztest_pool_scrubbed = B_FALSE; static kmutex_t ztest_checkpoint_lock; /* * The ztest_name_lock protects the pool and dataset namespace used by * the individual tests. To modify the namespace, consumers must grab * this lock as writer. Grabbing the lock as reader will ensure that the * namespace does not change while the lock is held. */ static pthread_rwlock_t ztest_name_lock; static boolean_t ztest_dump_core = B_TRUE; static boolean_t ztest_exiting; /* Global commit callback list */ static ztest_cb_list_t zcl; /* Commit cb delay */ static uint64_t zc_min_txg_delay = UINT64_MAX; static int zc_cb_counter = 0; /* * Minimum number of commit callbacks that need to be registered for us to check * whether the minimum txg delay is acceptable. */ #define ZTEST_COMMIT_CB_MIN_REG 100 /* * If a number of txgs equal to this threshold have been created after a commit * callback has been registered but not called, then we assume there is an * implementation bug. */ #define ZTEST_COMMIT_CB_THRESH (TXG_CONCURRENT_STATES + 1000) enum ztest_object { ZTEST_META_DNODE = 0, ZTEST_DIROBJ, ZTEST_OBJECTS }; static __attribute__((noreturn)) void usage(boolean_t requested); static int ztest_scrub_impl(spa_t *spa); /* * These libumem hooks provide a reasonable set of defaults for the allocator's * debugging facilities. */ const char * _umem_debug_init(void) { return ("default,verbose"); /* $UMEM_DEBUG setting */ } const char * _umem_logging_init(void) { return ("fail,contents"); /* $UMEM_LOGGING setting */ } static void dump_debug_buffer(void) { ssize_t ret __attribute__((unused)); if (!ztest_opts.zo_dump_dbgmsg) return; /* * We use write() instead of printf() so that this function * is safe to call from a signal handler. */ ret = write(STDERR_FILENO, "\n", 1); zfs_dbgmsg_print(STDERR_FILENO, "ztest"); } static void sig_handler(int signo) { struct sigaction action; libspl_backtrace(STDERR_FILENO); dump_debug_buffer(); /* * Restore default action and re-raise signal so SIGSEGV and * SIGABRT can trigger a core dump. */ action.sa_handler = SIG_DFL; sigemptyset(&action.sa_mask); action.sa_flags = 0; (void) sigaction(signo, &action, NULL); raise(signo); } #define FATAL_MSG_SZ 1024 static const char *fatal_msg; static __attribute__((format(printf, 2, 3))) __attribute__((noreturn)) void fatal(int do_perror, const char *message, ...) { va_list args; int save_errno = errno; char *buf; (void) fflush(stdout); buf = umem_alloc(FATAL_MSG_SZ, UMEM_NOFAIL); if (buf == NULL) goto out; va_start(args, message); (void) sprintf(buf, "ztest: "); /* LINTED */ (void) vsprintf(buf + strlen(buf), message, args); va_end(args); if (do_perror) { (void) snprintf(buf + strlen(buf), FATAL_MSG_SZ - strlen(buf), ": %s", strerror(save_errno)); } (void) fprintf(stderr, "%s\n", buf); fatal_msg = buf; /* to ease debugging */ out: if (ztest_dump_core) abort(); else dump_debug_buffer(); exit(3); } static int str2shift(const char *buf) { const char *ends = "BKMGTPEZ"; int i; if (buf[0] == '\0') return (0); for (i = 0; i < strlen(ends); i++) { if (toupper(buf[0]) == ends[i]) break; } if (i == strlen(ends)) { (void) fprintf(stderr, "ztest: invalid bytes suffix: %s\n", buf); usage(B_FALSE); } if (buf[1] == '\0' || (toupper(buf[1]) == 'B' && buf[2] == '\0')) { return (10*i); } (void) fprintf(stderr, "ztest: invalid bytes suffix: %s\n", buf); usage(B_FALSE); } static uint64_t nicenumtoull(const char *buf) { char *end; uint64_t val; val = strtoull(buf, &end, 0); if (end == buf) { (void) fprintf(stderr, "ztest: bad numeric value: %s\n", buf); usage(B_FALSE); } else if (end[0] == '.') { double fval = strtod(buf, &end); fval *= pow(2, str2shift(end)); /* * UINT64_MAX is not exactly representable as a double. * The closest representation is UINT64_MAX + 1, so we * use a >= comparison instead of > for the bounds check. */ if (fval >= (double)UINT64_MAX) { (void) fprintf(stderr, "ztest: value too large: %s\n", buf); usage(B_FALSE); } val = (uint64_t)fval; } else { int shift = str2shift(end); if (shift >= 64 || (val << shift) >> shift != val) { (void) fprintf(stderr, "ztest: value too large: %s\n", buf); usage(B_FALSE); } val <<= shift; } return (val); } typedef struct ztest_option { const char short_opt; const char *long_opt; const char *long_opt_param; const char *comment; unsigned int default_int; const char *default_str; } ztest_option_t; /* * The following option_table is used for generating the usage info as well as * the long and short option information for calling getopt_long(). */ static ztest_option_t option_table[] = { { 'v', "vdevs", "INTEGER", "Number of vdevs", DEFAULT_VDEV_COUNT, NULL}, { 's', "vdev-size", "INTEGER", "Size of each vdev", NO_DEFAULT, DEFAULT_VDEV_SIZE_STR}, { 'a', "alignment-shift", "INTEGER", "Alignment shift; use 0 for random", DEFAULT_ASHIFT, NULL}, { 'm', "mirror-copies", "INTEGER", "Number of mirror copies", DEFAULT_MIRRORS, NULL}, { 'r', "raid-disks", "INTEGER", "Number of raidz/draid disks", DEFAULT_RAID_CHILDREN, NULL}, { 'R', "raid-parity", "INTEGER", "Raid parity", DEFAULT_RAID_PARITY, NULL}, { 'K', "raid-kind", "raidz|eraidz|draid|random", "Raid kind", NO_DEFAULT, "random"}, { 'D', "draid-data", "INTEGER", "Number of draid data drives", DEFAULT_DRAID_DATA, NULL}, { 'S', "draid-spares", "INTEGER", "Number of draid spares", DEFAULT_DRAID_SPARES, NULL}, { 'd', "datasets", "INTEGER", "Number of datasets", DEFAULT_DATASETS_COUNT, NULL}, { 't', "threads", "INTEGER", "Number of ztest threads", DEFAULT_THREADS, NULL}, { 'g', "gang-block-threshold", "INTEGER", "Metaslab gang block threshold", NO_DEFAULT, DEFAULT_FORCE_GANGING_STR}, { 'i', "init-count", "INTEGER", "Number of times to initialize pool", DEFAULT_INITS, NULL}, { 'k', "kill-percentage", "INTEGER", "Kill percentage", NO_DEFAULT, DEFAULT_KILLRATE_STR}, { 'p', "pool-name", "STRING", "Pool name", NO_DEFAULT, DEFAULT_POOL}, { 'f', "vdev-file-directory", "PATH", "File directory for vdev files", NO_DEFAULT, DEFAULT_VDEV_DIR}, { 'M', "multi-host", NULL, "Multi-host; simulate pool imported on remote host", NO_DEFAULT, NULL}, { 'E', "use-existing-pool", NULL, "Use existing pool instead of creating new one", NO_DEFAULT, NULL}, { 'T', "run-time", "INTEGER", "Total run time", NO_DEFAULT, DEFAULT_RUN_TIME_STR}, { 'P', "pass-time", "INTEGER", "Time per pass", NO_DEFAULT, DEFAULT_PASS_TIME_STR}, { 'F', "freeze-loops", "INTEGER", "Max loops in spa_freeze()", DEFAULT_MAX_LOOPS, NULL}, { 'B', "alt-ztest", "PATH", "Alternate ztest path", NO_DEFAULT, NULL}, { 'C', "vdev-class-state", "on|off|random", "vdev class state", NO_DEFAULT, "random"}, { 'X', "raidz-expansion", NULL, "Perform a dedicated raidz expansion test", NO_DEFAULT, NULL}, { 'o', "option", "\"OPTION=INTEGER\"", "Set global variable to an unsigned 32-bit integer value", NO_DEFAULT, NULL}, { 'G', "dump-debug-msg", NULL, "Dump zfs_dbgmsg buffer before exiting due to an error", NO_DEFAULT, NULL}, { 'V', "verbose", NULL, "Verbose (use multiple times for ever more verbosity)", NO_DEFAULT, NULL}, { 'h', "help", NULL, "Show this help", NO_DEFAULT, NULL}, {0, 0, 0, 0, 0, 0} }; static struct option *long_opts = NULL; static char *short_opts = NULL; static void init_options(void) { ASSERT3P(long_opts, ==, NULL); ASSERT3P(short_opts, ==, NULL); int count = sizeof (option_table) / sizeof (option_table[0]); long_opts = umem_alloc(sizeof (struct option) * count, UMEM_NOFAIL); short_opts = umem_alloc(sizeof (char) * 2 * count, UMEM_NOFAIL); int short_opt_index = 0; for (int i = 0; i < count; i++) { long_opts[i].val = option_table[i].short_opt; long_opts[i].name = option_table[i].long_opt; long_opts[i].has_arg = option_table[i].long_opt_param != NULL ? required_argument : no_argument; long_opts[i].flag = NULL; short_opts[short_opt_index++] = option_table[i].short_opt; if (option_table[i].long_opt_param != NULL) { short_opts[short_opt_index++] = ':'; } } } static void fini_options(void) { int count = sizeof (option_table) / sizeof (option_table[0]); umem_free(long_opts, sizeof (struct option) * count); umem_free(short_opts, sizeof (char) * 2 * count); long_opts = NULL; short_opts = NULL; } static __attribute__((noreturn)) void usage(boolean_t requested) { char option[80]; FILE *fp = requested ? stdout : stderr; (void) fprintf(fp, "Usage: %s [OPTIONS...]\n", DEFAULT_POOL); for (int i = 0; option_table[i].short_opt != 0; i++) { if (option_table[i].long_opt_param != NULL) { (void) sprintf(option, " -%c --%s=%s", option_table[i].short_opt, option_table[i].long_opt, option_table[i].long_opt_param); } else { (void) sprintf(option, " -%c --%s", option_table[i].short_opt, option_table[i].long_opt); } (void) fprintf(fp, " %-43s%s", option, option_table[i].comment); if (option_table[i].long_opt_param != NULL) { if (option_table[i].default_str != NULL) { (void) fprintf(fp, " (default: %s)", option_table[i].default_str); } else if (option_table[i].default_int != NO_DEFAULT) { (void) fprintf(fp, " (default: %u)", option_table[i].default_int); } } (void) fprintf(fp, "\n"); } exit(requested ? 0 : 1); } static uint64_t ztest_random(uint64_t range) { uint64_t r; ASSERT3S(ztest_fd_rand, >=, 0); if (range == 0) return (0); if (read(ztest_fd_rand, &r, sizeof (r)) != sizeof (r)) fatal(B_TRUE, "short read from /dev/urandom"); return (r % range); } static void ztest_parse_name_value(const char *input, ztest_shared_opts_t *zo) { char name[32]; char *value; int state = ZTEST_VDEV_CLASS_RND; (void) strlcpy(name, input, sizeof (name)); value = strchr(name, '='); if (value == NULL) { (void) fprintf(stderr, "missing value in property=value " "'-C' argument (%s)\n", input); usage(B_FALSE); } *(value) = '\0'; value++; if (strcmp(value, "on") == 0) { state = ZTEST_VDEV_CLASS_ON; } else if (strcmp(value, "off") == 0) { state = ZTEST_VDEV_CLASS_OFF; } else if (strcmp(value, "random") == 0) { state = ZTEST_VDEV_CLASS_RND; } else { (void) fprintf(stderr, "invalid property value '%s'\n", value); usage(B_FALSE); } if (strcmp(name, "special") == 0) { zo->zo_special_vdevs = state; } else { (void) fprintf(stderr, "invalid property name '%s'\n", name); usage(B_FALSE); } if (zo->zo_verbose >= 3) (void) printf("%s vdev state is '%s'\n", name, value); } static void process_options(int argc, char **argv) { char *path; ztest_shared_opts_t *zo = &ztest_opts; int opt; uint64_t value; const char *raid_kind = "random"; memcpy(zo, &ztest_opts_defaults, sizeof (*zo)); init_options(); while ((opt = getopt_long(argc, argv, short_opts, long_opts, NULL)) != EOF) { value = 0; switch (opt) { case 'v': case 's': case 'a': case 'm': case 'r': case 'R': case 'D': case 'S': case 'd': case 't': case 'g': case 'i': case 'k': case 'T': case 'P': case 'F': value = nicenumtoull(optarg); } switch (opt) { case 'v': zo->zo_vdevs = value; break; case 's': zo->zo_vdev_size = MAX(SPA_MINDEVSIZE, value); break; case 'a': zo->zo_ashift = value; break; case 'm': zo->zo_mirrors = value; break; case 'r': zo->zo_raid_children = MAX(1, value); break; case 'R': zo->zo_raid_parity = MIN(MAX(value, 1), 3); break; case 'K': raid_kind = optarg; break; case 'D': zo->zo_draid_data = MAX(1, value); break; case 'S': zo->zo_draid_spares = MAX(1, value); break; case 'd': zo->zo_datasets = MAX(1, value); break; case 't': zo->zo_threads = MAX(1, value); break; case 'g': zo->zo_metaslab_force_ganging = MAX(SPA_MINBLOCKSIZE << 1, value); break; case 'i': zo->zo_init = value; break; case 'k': zo->zo_killrate = value; break; case 'p': (void) strlcpy(zo->zo_pool, optarg, sizeof (zo->zo_pool)); break; case 'f': path = realpath(optarg, NULL); if (path == NULL) { (void) fprintf(stderr, "error: %s: %s\n", optarg, strerror(errno)); usage(B_FALSE); } else { (void) strlcpy(zo->zo_dir, path, sizeof (zo->zo_dir)); free(path); } break; case 'M': zo->zo_mmp_test = 1; break; case 'V': zo->zo_verbose++; break; case 'X': zo->zo_raidz_expand_test = RAIDZ_EXPAND_REQUESTED; break; case 'E': zo->zo_init = 0; break; case 'T': zo->zo_time = value; break; case 'P': zo->zo_passtime = MAX(1, value); break; case 'F': zo->zo_maxloops = MAX(1, value); break; case 'B': (void) strlcpy(zo->zo_alt_ztest, optarg, sizeof (zo->zo_alt_ztest)); break; case 'C': ztest_parse_name_value(optarg, zo); break; case 'o': if (zo->zo_gvars_count >= ZO_GVARS_MAX_COUNT) { (void) fprintf(stderr, "max global var count (%zu) exceeded\n", ZO_GVARS_MAX_COUNT); usage(B_FALSE); } char *v = zo->zo_gvars[zo->zo_gvars_count]; if (strlcpy(v, optarg, ZO_GVARS_MAX_ARGLEN) >= ZO_GVARS_MAX_ARGLEN) { (void) fprintf(stderr, "global var option '%s' is too long\n", optarg); usage(B_FALSE); } zo->zo_gvars_count++; break; case 'G': zo->zo_dump_dbgmsg = 1; break; case 'h': usage(B_TRUE); break; case '?': default: usage(B_FALSE); break; } } fini_options(); /* Force compatible options for raidz expansion run */ if (zo->zo_raidz_expand_test == RAIDZ_EXPAND_REQUESTED) { zo->zo_mmp_test = 0; zo->zo_mirrors = 0; zo->zo_vdevs = 1; zo->zo_vdev_size = DEFAULT_VDEV_SIZE * 2; zo->zo_raid_do_expand = B_FALSE; raid_kind = "raidz"; } if (strcmp(raid_kind, "random") == 0) { switch (ztest_random(3)) { case 0: raid_kind = "raidz"; break; case 1: raid_kind = "eraidz"; break; case 2: raid_kind = "draid"; break; } if (ztest_opts.zo_verbose >= 3) (void) printf("choosing RAID type '%s'\n", raid_kind); } if (strcmp(raid_kind, "draid") == 0) { uint64_t min_devsize; /* With fewer disk use 256M, otherwise 128M is OK */ min_devsize = (ztest_opts.zo_raid_children < 16) ? (256ULL << 20) : (128ULL << 20); /* No top-level mirrors with dRAID for now */ zo->zo_mirrors = 0; /* Use more appropriate defaults for dRAID */ if (zo->zo_vdevs == ztest_opts_defaults.zo_vdevs) zo->zo_vdevs = 1; if (zo->zo_raid_children == ztest_opts_defaults.zo_raid_children) zo->zo_raid_children = 16; if (zo->zo_ashift < 12) zo->zo_ashift = 12; if (zo->zo_vdev_size < min_devsize) zo->zo_vdev_size = min_devsize; if (zo->zo_draid_data + zo->zo_raid_parity > zo->zo_raid_children - zo->zo_draid_spares) { (void) fprintf(stderr, "error: too few draid " "children (%d) for stripe width (%d)\n", zo->zo_raid_children, zo->zo_draid_data + zo->zo_raid_parity); usage(B_FALSE); } (void) strlcpy(zo->zo_raid_type, VDEV_TYPE_DRAID, sizeof (zo->zo_raid_type)); } else if (strcmp(raid_kind, "eraidz") == 0) { /* using eraidz (expandable raidz) */ zo->zo_raid_do_expand = B_TRUE; /* tests expect top-level to be raidz */ zo->zo_mirrors = 0; zo->zo_vdevs = 1; /* Make sure parity is less than data columns */ zo->zo_raid_parity = MIN(zo->zo_raid_parity, zo->zo_raid_children - 1); } else /* using raidz */ { ASSERT0(strcmp(raid_kind, "raidz")); zo->zo_raid_parity = MIN(zo->zo_raid_parity, zo->zo_raid_children - 1); } zo->zo_vdevtime = (zo->zo_vdevs > 0 ? zo->zo_time * NANOSEC / zo->zo_vdevs : UINT64_MAX >> 2); if (*zo->zo_alt_ztest) { const char *invalid_what = "ztest"; char *val = zo->zo_alt_ztest; if (0 != access(val, X_OK) || (strrchr(val, '/') == NULL && (errno == EINVAL))) goto invalid; int dirlen = strrchr(val, '/') - val; strlcpy(zo->zo_alt_libpath, val, MIN(sizeof (zo->zo_alt_libpath), dirlen + 1)); invalid_what = "library path", val = zo->zo_alt_libpath; if (strrchr(val, '/') == NULL && (errno == EINVAL)) goto invalid; *strrchr(val, '/') = '\0'; strlcat(val, "/lib", sizeof (zo->zo_alt_libpath)); if (0 != access(zo->zo_alt_libpath, X_OK)) goto invalid; return; invalid: ztest_dump_core = B_FALSE; fatal(B_TRUE, "invalid alternate %s %s", invalid_what, val); } } static void ztest_kill(ztest_shared_t *zs) { zs->zs_alloc = metaslab_class_get_alloc(spa_normal_class(ztest_spa)); zs->zs_space = metaslab_class_get_space(spa_normal_class(ztest_spa)); /* * Before we kill ourselves, make sure that the config is updated. * See comment above spa_write_cachefile(). */ if (raidz_expand_pause_point != RAIDZ_EXPAND_PAUSE_NONE) { if (mutex_tryenter(&spa_namespace_lock)) { spa_write_cachefile(ztest_spa, B_FALSE, B_FALSE, B_FALSE); mutex_exit(&spa_namespace_lock); ztest_scratch_state->zs_raidz_scratch_verify_pause = raidz_expand_pause_point; } else { /* * Do not verify scratch object in case if * spa_namespace_lock cannot be acquired, * it can cause deadlock in spa_config_update(). */ raidz_expand_pause_point = RAIDZ_EXPAND_PAUSE_NONE; return; } } else { mutex_enter(&spa_namespace_lock); spa_write_cachefile(ztest_spa, B_FALSE, B_FALSE, B_FALSE); mutex_exit(&spa_namespace_lock); } (void) raise(SIGKILL); } static void ztest_record_enospc(const char *s) { (void) s; ztest_shared->zs_enospc_count++; } static uint64_t ztest_get_ashift(void) { if (ztest_opts.zo_ashift == 0) return (SPA_MINBLOCKSHIFT + ztest_random(5)); return (ztest_opts.zo_ashift); } static boolean_t ztest_is_draid_spare(const char *name) { uint64_t spare_id = 0, parity = 0, vdev_id = 0; if (sscanf(name, VDEV_TYPE_DRAID "%"PRIu64"-%"PRIu64"-%"PRIu64"", &parity, &vdev_id, &spare_id) == 3) { return (B_TRUE); } return (B_FALSE); } static nvlist_t * make_vdev_file(const char *path, const char *aux, const char *pool, size_t size, uint64_t ashift) { char *pathbuf = NULL; uint64_t vdev; nvlist_t *file; boolean_t draid_spare = B_FALSE; if (ashift == 0) ashift = ztest_get_ashift(); if (path == NULL) { pathbuf = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); path = pathbuf; if (aux != NULL) { vdev = ztest_shared->zs_vdev_aux; (void) snprintf(pathbuf, MAXPATHLEN, ztest_aux_template, ztest_opts.zo_dir, pool == NULL ? ztest_opts.zo_pool : pool, aux, vdev); } else { vdev = ztest_shared->zs_vdev_next_leaf++; (void) snprintf(pathbuf, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, pool == NULL ? ztest_opts.zo_pool : pool, vdev); } } else { draid_spare = ztest_is_draid_spare(path); } if (size != 0 && !draid_spare) { int fd = open(path, O_RDWR | O_CREAT | O_TRUNC, 0666); if (fd == -1) fatal(B_TRUE, "can't open %s", path); if (ftruncate(fd, size) != 0) fatal(B_TRUE, "can't ftruncate %s", path); (void) close(fd); } file = fnvlist_alloc(); fnvlist_add_string(file, ZPOOL_CONFIG_TYPE, draid_spare ? VDEV_TYPE_DRAID_SPARE : VDEV_TYPE_FILE); fnvlist_add_string(file, ZPOOL_CONFIG_PATH, path); fnvlist_add_uint64(file, ZPOOL_CONFIG_ASHIFT, ashift); umem_free(pathbuf, MAXPATHLEN); return (file); } static nvlist_t * make_vdev_raid(const char *path, const char *aux, const char *pool, size_t size, uint64_t ashift, int r) { nvlist_t *raid, **child; int c; if (r < 2) return (make_vdev_file(path, aux, pool, size, ashift)); child = umem_alloc(r * sizeof (nvlist_t *), UMEM_NOFAIL); for (c = 0; c < r; c++) child[c] = make_vdev_file(path, aux, pool, size, ashift); raid = fnvlist_alloc(); fnvlist_add_string(raid, ZPOOL_CONFIG_TYPE, ztest_opts.zo_raid_type); fnvlist_add_uint64(raid, ZPOOL_CONFIG_NPARITY, ztest_opts.zo_raid_parity); fnvlist_add_nvlist_array(raid, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)child, r); if (strcmp(ztest_opts.zo_raid_type, VDEV_TYPE_DRAID) == 0) { uint64_t ndata = ztest_opts.zo_draid_data; uint64_t nparity = ztest_opts.zo_raid_parity; uint64_t nspares = ztest_opts.zo_draid_spares; uint64_t children = ztest_opts.zo_raid_children; uint64_t ngroups = 1; /* * Calculate the minimum number of groups required to fill a * slice. This is the LCM of the stripe width (data + parity) * and the number of data drives (children - spares). */ while (ngroups * (ndata + nparity) % (children - nspares) != 0) ngroups++; /* Store the basic dRAID configuration. */ fnvlist_add_uint64(raid, ZPOOL_CONFIG_DRAID_NDATA, ndata); fnvlist_add_uint64(raid, ZPOOL_CONFIG_DRAID_NSPARES, nspares); fnvlist_add_uint64(raid, ZPOOL_CONFIG_DRAID_NGROUPS, ngroups); } for (c = 0; c < r; c++) fnvlist_free(child[c]); umem_free(child, r * sizeof (nvlist_t *)); return (raid); } static nvlist_t * make_vdev_mirror(const char *path, const char *aux, const char *pool, size_t size, uint64_t ashift, int r, int m) { nvlist_t *mirror, **child; int c; if (m < 1) return (make_vdev_raid(path, aux, pool, size, ashift, r)); child = umem_alloc(m * sizeof (nvlist_t *), UMEM_NOFAIL); for (c = 0; c < m; c++) child[c] = make_vdev_raid(path, aux, pool, size, ashift, r); mirror = fnvlist_alloc(); fnvlist_add_string(mirror, ZPOOL_CONFIG_TYPE, VDEV_TYPE_MIRROR); fnvlist_add_nvlist_array(mirror, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)child, m); for (c = 0; c < m; c++) fnvlist_free(child[c]); umem_free(child, m * sizeof (nvlist_t *)); return (mirror); } static nvlist_t * make_vdev_root(const char *path, const char *aux, const char *pool, size_t size, uint64_t ashift, const char *class, int r, int m, int t) { nvlist_t *root, **child; int c; boolean_t log; ASSERT3S(t, >, 0); log = (class != NULL && strcmp(class, "log") == 0); child = umem_alloc(t * sizeof (nvlist_t *), UMEM_NOFAIL); for (c = 0; c < t; c++) { child[c] = make_vdev_mirror(path, aux, pool, size, ashift, r, m); fnvlist_add_uint64(child[c], ZPOOL_CONFIG_IS_LOG, log); if (class != NULL && class[0] != '\0') { ASSERT(m > 1 || log); /* expecting a mirror */ fnvlist_add_string(child[c], ZPOOL_CONFIG_ALLOCATION_BIAS, class); } } root = fnvlist_alloc(); fnvlist_add_string(root, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT); fnvlist_add_nvlist_array(root, aux ? aux : ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)child, t); for (c = 0; c < t; c++) fnvlist_free(child[c]); umem_free(child, t * sizeof (nvlist_t *)); return (root); } /* * Find a random spa version. Returns back a random spa version in the * range [initial_version, SPA_VERSION_FEATURES]. */ static uint64_t ztest_random_spa_version(uint64_t initial_version) { uint64_t version = initial_version; if (version <= SPA_VERSION_BEFORE_FEATURES) { version = version + ztest_random(SPA_VERSION_BEFORE_FEATURES - version + 1); } if (version > SPA_VERSION_BEFORE_FEATURES) version = SPA_VERSION_FEATURES; ASSERT(SPA_VERSION_IS_SUPPORTED(version)); return (version); } static int ztest_random_blocksize(void) { ASSERT3U(ztest_spa->spa_max_ashift, !=, 0); /* * Choose a block size >= the ashift. * If the SPA supports new MAXBLOCKSIZE, test up to 1MB blocks. */ int maxbs = SPA_OLD_MAXBLOCKSHIFT; if (spa_maxblocksize(ztest_spa) == SPA_MAXBLOCKSIZE) maxbs = 20; uint64_t block_shift = ztest_random(maxbs - ztest_spa->spa_max_ashift + 1); return (1 << (SPA_MINBLOCKSHIFT + block_shift)); } static int ztest_random_dnodesize(void) { int slots; int max_slots = spa_maxdnodesize(ztest_spa) >> DNODE_SHIFT; if (max_slots == DNODE_MIN_SLOTS) return (DNODE_MIN_SIZE); /* * Weight the random distribution more heavily toward smaller * dnode sizes since that is more likely to reflect real-world * usage. */ ASSERT3U(max_slots, >, 4); switch (ztest_random(10)) { case 0: slots = 5 + ztest_random(max_slots - 4); break; case 1 ... 4: slots = 2 + ztest_random(3); break; default: slots = 1; break; } return (slots << DNODE_SHIFT); } static int ztest_random_ibshift(void) { return (DN_MIN_INDBLKSHIFT + ztest_random(DN_MAX_INDBLKSHIFT - DN_MIN_INDBLKSHIFT + 1)); } static uint64_t ztest_random_vdev_top(spa_t *spa, boolean_t log_ok) { uint64_t top; vdev_t *rvd = spa->spa_root_vdev; vdev_t *tvd; ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0); do { top = ztest_random(rvd->vdev_children); tvd = rvd->vdev_child[top]; } while (!vdev_is_concrete(tvd) || (tvd->vdev_islog && !log_ok) || tvd->vdev_mg == NULL || tvd->vdev_mg->mg_class == NULL); return (top); } static uint64_t ztest_random_dsl_prop(zfs_prop_t prop) { uint64_t value; do { value = zfs_prop_random_value(prop, ztest_random(-1ULL)); } while (prop == ZFS_PROP_CHECKSUM && value == ZIO_CHECKSUM_OFF); return (value); } static int ztest_dsl_prop_set_uint64(char *osname, zfs_prop_t prop, uint64_t value, boolean_t inherit) { const char *propname = zfs_prop_to_name(prop); const char *valname; char *setpoint; uint64_t curval; int error; error = dsl_prop_set_int(osname, propname, (inherit ? ZPROP_SRC_NONE : ZPROP_SRC_LOCAL), value); if (error == ENOSPC) { ztest_record_enospc(FTAG); return (error); } ASSERT0(error); setpoint = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); VERIFY0(dsl_prop_get_integer(osname, propname, &curval, setpoint)); if (ztest_opts.zo_verbose >= 6) { int err; err = zfs_prop_index_to_string(prop, curval, &valname); if (err) (void) printf("%s %s = %llu at '%s'\n", osname, propname, (unsigned long long)curval, setpoint); else (void) printf("%s %s = %s at '%s'\n", osname, propname, valname, setpoint); } umem_free(setpoint, MAXPATHLEN); return (error); } static int ztest_spa_prop_set_uint64(zpool_prop_t prop, uint64_t value) { spa_t *spa = ztest_spa; nvlist_t *props = NULL; int error; props = fnvlist_alloc(); fnvlist_add_uint64(props, zpool_prop_to_name(prop), value); error = spa_prop_set(spa, props); fnvlist_free(props); if (error == ENOSPC) { ztest_record_enospc(FTAG); return (error); } ASSERT0(error); return (error); } static int ztest_dmu_objset_own(const char *name, dmu_objset_type_t type, boolean_t readonly, boolean_t decrypt, const void *tag, objset_t **osp) { int err; char *cp = NULL; char ddname[ZFS_MAX_DATASET_NAME_LEN]; strlcpy(ddname, name, sizeof (ddname)); cp = strchr(ddname, '@'); if (cp != NULL) *cp = '\0'; err = dmu_objset_own(name, type, readonly, decrypt, tag, osp); while (decrypt && err == EACCES) { dsl_crypto_params_t *dcp; nvlist_t *crypto_args = fnvlist_alloc(); fnvlist_add_uint8_array(crypto_args, "wkeydata", (uint8_t *)ztest_wkeydata, WRAPPING_KEY_LEN); VERIFY0(dsl_crypto_params_create_nvlist(DCP_CMD_NONE, NULL, crypto_args, &dcp)); err = spa_keystore_load_wkey(ddname, dcp, B_FALSE); /* * Note: if there was an error loading, the wkey was not * consumed, and needs to be freed. */ dsl_crypto_params_free(dcp, (err != 0)); fnvlist_free(crypto_args); if (err == EINVAL) { /* * We couldn't load a key for this dataset so try * the parent. This loop will eventually hit the * encryption root since ztest only makes clones * as children of their origin datasets. */ cp = strrchr(ddname, '/'); if (cp == NULL) return (err); *cp = '\0'; err = EACCES; continue; } else if (err != 0) { break; } err = dmu_objset_own(name, type, readonly, decrypt, tag, osp); break; } return (err); } static void ztest_rll_init(rll_t *rll) { rll->rll_writer = NULL; rll->rll_readers = 0; mutex_init(&rll->rll_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&rll->rll_cv, NULL, CV_DEFAULT, NULL); } static void ztest_rll_destroy(rll_t *rll) { ASSERT3P(rll->rll_writer, ==, NULL); ASSERT0(rll->rll_readers); mutex_destroy(&rll->rll_lock); cv_destroy(&rll->rll_cv); } static void ztest_rll_lock(rll_t *rll, rl_type_t type) { mutex_enter(&rll->rll_lock); if (type == ZTRL_READER) { while (rll->rll_writer != NULL) (void) cv_wait(&rll->rll_cv, &rll->rll_lock); rll->rll_readers++; } else { while (rll->rll_writer != NULL || rll->rll_readers) (void) cv_wait(&rll->rll_cv, &rll->rll_lock); rll->rll_writer = curthread; } mutex_exit(&rll->rll_lock); } static void ztest_rll_unlock(rll_t *rll) { mutex_enter(&rll->rll_lock); if (rll->rll_writer) { ASSERT0(rll->rll_readers); rll->rll_writer = NULL; } else { ASSERT3S(rll->rll_readers, >, 0); ASSERT3P(rll->rll_writer, ==, NULL); rll->rll_readers--; } if (rll->rll_writer == NULL && rll->rll_readers == 0) cv_broadcast(&rll->rll_cv); mutex_exit(&rll->rll_lock); } static void ztest_object_lock(ztest_ds_t *zd, uint64_t object, rl_type_t type) { rll_t *rll = &zd->zd_object_lock[object & (ZTEST_OBJECT_LOCKS - 1)]; ztest_rll_lock(rll, type); } static void ztest_object_unlock(ztest_ds_t *zd, uint64_t object) { rll_t *rll = &zd->zd_object_lock[object & (ZTEST_OBJECT_LOCKS - 1)]; ztest_rll_unlock(rll); } static rl_t * ztest_range_lock(ztest_ds_t *zd, uint64_t object, uint64_t offset, uint64_t size, rl_type_t type) { uint64_t hash = object ^ (offset % (ZTEST_RANGE_LOCKS + 1)); rll_t *rll = &zd->zd_range_lock[hash & (ZTEST_RANGE_LOCKS - 1)]; rl_t *rl; rl = umem_alloc(sizeof (*rl), UMEM_NOFAIL); rl->rl_object = object; rl->rl_offset = offset; rl->rl_size = size; rl->rl_lock = rll; ztest_rll_lock(rll, type); return (rl); } static void ztest_range_unlock(rl_t *rl) { rll_t *rll = rl->rl_lock; ztest_rll_unlock(rll); umem_free(rl, sizeof (*rl)); } static void ztest_zd_init(ztest_ds_t *zd, ztest_shared_ds_t *szd, objset_t *os) { zd->zd_os = os; zd->zd_zilog = dmu_objset_zil(os); zd->zd_shared = szd; dmu_objset_name(os, zd->zd_name); int l; if (zd->zd_shared != NULL) zd->zd_shared->zd_seq = 0; VERIFY0(pthread_rwlock_init(&zd->zd_zilog_lock, NULL)); mutex_init(&zd->zd_dirobj_lock, NULL, MUTEX_DEFAULT, NULL); for (l = 0; l < ZTEST_OBJECT_LOCKS; l++) ztest_rll_init(&zd->zd_object_lock[l]); for (l = 0; l < ZTEST_RANGE_LOCKS; l++) ztest_rll_init(&zd->zd_range_lock[l]); } static void ztest_zd_fini(ztest_ds_t *zd) { int l; mutex_destroy(&zd->zd_dirobj_lock); (void) pthread_rwlock_destroy(&zd->zd_zilog_lock); for (l = 0; l < ZTEST_OBJECT_LOCKS; l++) ztest_rll_destroy(&zd->zd_object_lock[l]); for (l = 0; l < ZTEST_RANGE_LOCKS; l++) ztest_rll_destroy(&zd->zd_range_lock[l]); } #define TXG_MIGHTWAIT (ztest_random(10) == 0 ? TXG_NOWAIT : TXG_WAIT) static uint64_t ztest_tx_assign(dmu_tx_t *tx, uint64_t txg_how, const char *tag) { uint64_t txg; int error; /* * Attempt to assign tx to some transaction group. */ error = dmu_tx_assign(tx, txg_how); if (error) { if (error == ERESTART) { ASSERT3U(txg_how, ==, TXG_NOWAIT); dmu_tx_wait(tx); } else { ASSERT3U(error, ==, ENOSPC); ztest_record_enospc(tag); } dmu_tx_abort(tx); return (0); } txg = dmu_tx_get_txg(tx); ASSERT3U(txg, !=, 0); return (txg); } static void ztest_bt_generate(ztest_block_tag_t *bt, objset_t *os, uint64_t object, uint64_t dnodesize, uint64_t offset, uint64_t gen, uint64_t txg, uint64_t crtxg) { bt->bt_magic = BT_MAGIC; bt->bt_objset = dmu_objset_id(os); bt->bt_object = object; bt->bt_dnodesize = dnodesize; bt->bt_offset = offset; bt->bt_gen = gen; bt->bt_txg = txg; bt->bt_crtxg = crtxg; } static void ztest_bt_verify(ztest_block_tag_t *bt, objset_t *os, uint64_t object, uint64_t dnodesize, uint64_t offset, uint64_t gen, uint64_t txg, uint64_t crtxg) { ASSERT3U(bt->bt_magic, ==, BT_MAGIC); ASSERT3U(bt->bt_objset, ==, dmu_objset_id(os)); ASSERT3U(bt->bt_object, ==, object); ASSERT3U(bt->bt_dnodesize, ==, dnodesize); ASSERT3U(bt->bt_offset, ==, offset); ASSERT3U(bt->bt_gen, <=, gen); ASSERT3U(bt->bt_txg, <=, txg); ASSERT3U(bt->bt_crtxg, ==, crtxg); } static ztest_block_tag_t * ztest_bt_bonus(dmu_buf_t *db) { dmu_object_info_t doi; ztest_block_tag_t *bt; dmu_object_info_from_db(db, &doi); ASSERT3U(doi.doi_bonus_size, <=, db->db_size); ASSERT3U(doi.doi_bonus_size, >=, sizeof (*bt)); bt = (void *)((char *)db->db_data + doi.doi_bonus_size - sizeof (*bt)); return (bt); } /* * Generate a token to fill up unused bonus buffer space. Try to make * it unique to the object, generation, and offset to verify that data * is not getting overwritten by data from other dnodes. */ #define ZTEST_BONUS_FILL_TOKEN(obj, ds, gen, offset) \ (((ds) << 48) | ((gen) << 32) | ((obj) << 8) | (offset)) /* * Fill up the unused bonus buffer region before the block tag with a * verifiable pattern. Filling the whole bonus area with non-zero data * helps ensure that all dnode traversal code properly skips the * interior regions of large dnodes. */ static void ztest_fill_unused_bonus(dmu_buf_t *db, void *end, uint64_t obj, objset_t *os, uint64_t gen) { uint64_t *bonusp; ASSERT(IS_P2ALIGNED((char *)end - (char *)db->db_data, 8)); for (bonusp = db->db_data; bonusp < (uint64_t *)end; bonusp++) { uint64_t token = ZTEST_BONUS_FILL_TOKEN(obj, dmu_objset_id(os), gen, bonusp - (uint64_t *)db->db_data); *bonusp = token; } } /* * Verify that the unused area of a bonus buffer is filled with the * expected tokens. */ static void ztest_verify_unused_bonus(dmu_buf_t *db, void *end, uint64_t obj, objset_t *os, uint64_t gen) { uint64_t *bonusp; for (bonusp = db->db_data; bonusp < (uint64_t *)end; bonusp++) { uint64_t token = ZTEST_BONUS_FILL_TOKEN(obj, dmu_objset_id(os), gen, bonusp - (uint64_t *)db->db_data); VERIFY3U(*bonusp, ==, token); } } /* * ZIL logging ops */ #define lrz_type lr_mode #define lrz_blocksize lr_uid #define lrz_ibshift lr_gid #define lrz_bonustype lr_rdev #define lrz_dnodesize lr_crtime[1] static void ztest_log_create(ztest_ds_t *zd, dmu_tx_t *tx, lr_create_t *lr) { char *name = (void *)(lr + 1); /* name follows lr */ size_t namesize = strlen(name) + 1; itx_t *itx; if (zil_replaying(zd->zd_zilog, tx)) return; itx = zil_itx_create(TX_CREATE, sizeof (*lr) + namesize); memcpy(&itx->itx_lr + 1, &lr->lr_common + 1, sizeof (*lr) + namesize - sizeof (lr_t)); zil_itx_assign(zd->zd_zilog, itx, tx); } static void ztest_log_remove(ztest_ds_t *zd, dmu_tx_t *tx, lr_remove_t *lr, uint64_t object) { char *name = (void *)(lr + 1); /* name follows lr */ size_t namesize = strlen(name) + 1; itx_t *itx; if (zil_replaying(zd->zd_zilog, tx)) return; itx = zil_itx_create(TX_REMOVE, sizeof (*lr) + namesize); memcpy(&itx->itx_lr + 1, &lr->lr_common + 1, sizeof (*lr) + namesize - sizeof (lr_t)); itx->itx_oid = object; zil_itx_assign(zd->zd_zilog, itx, tx); } static void ztest_log_write(ztest_ds_t *zd, dmu_tx_t *tx, lr_write_t *lr) { itx_t *itx; itx_wr_state_t write_state = ztest_random(WR_NUM_STATES); if (zil_replaying(zd->zd_zilog, tx)) return; if (lr->lr_length > zil_max_log_data(zd->zd_zilog, sizeof (lr_write_t))) write_state = WR_INDIRECT; itx = zil_itx_create(TX_WRITE, sizeof (*lr) + (write_state == WR_COPIED ? lr->lr_length : 0)); if (write_state == WR_COPIED && dmu_read(zd->zd_os, lr->lr_foid, lr->lr_offset, lr->lr_length, ((lr_write_t *)&itx->itx_lr) + 1, DMU_READ_NO_PREFETCH) != 0) { zil_itx_destroy(itx); itx = zil_itx_create(TX_WRITE, sizeof (*lr)); write_state = WR_NEED_COPY; } itx->itx_private = zd; itx->itx_wr_state = write_state; itx->itx_sync = (ztest_random(8) == 0); memcpy(&itx->itx_lr + 1, &lr->lr_common + 1, sizeof (*lr) - sizeof (lr_t)); zil_itx_assign(zd->zd_zilog, itx, tx); } static void ztest_log_truncate(ztest_ds_t *zd, dmu_tx_t *tx, lr_truncate_t *lr) { itx_t *itx; if (zil_replaying(zd->zd_zilog, tx)) return; itx = zil_itx_create(TX_TRUNCATE, sizeof (*lr)); memcpy(&itx->itx_lr + 1, &lr->lr_common + 1, sizeof (*lr) - sizeof (lr_t)); itx->itx_sync = B_FALSE; zil_itx_assign(zd->zd_zilog, itx, tx); } static void ztest_log_setattr(ztest_ds_t *zd, dmu_tx_t *tx, lr_setattr_t *lr) { itx_t *itx; if (zil_replaying(zd->zd_zilog, tx)) return; itx = zil_itx_create(TX_SETATTR, sizeof (*lr)); memcpy(&itx->itx_lr + 1, &lr->lr_common + 1, sizeof (*lr) - sizeof (lr_t)); itx->itx_sync = B_FALSE; zil_itx_assign(zd->zd_zilog, itx, tx); } /* * ZIL replay ops */ static int ztest_replay_create(void *arg1, void *arg2, boolean_t byteswap) { ztest_ds_t *zd = arg1; lr_create_t *lr = arg2; char *name = (void *)(lr + 1); /* name follows lr */ objset_t *os = zd->zd_os; ztest_block_tag_t *bbt; dmu_buf_t *db; dmu_tx_t *tx; uint64_t txg; int error = 0; int bonuslen; if (byteswap) byteswap_uint64_array(lr, sizeof (*lr)); ASSERT3U(lr->lr_doid, ==, ZTEST_DIROBJ); ASSERT3S(name[0], !=, '\0'); tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, lr->lr_doid, B_TRUE, name); if (lr->lrz_type == DMU_OT_ZAP_OTHER) { dmu_tx_hold_zap(tx, DMU_NEW_OBJECT, B_TRUE, NULL); } else { dmu_tx_hold_bonus(tx, DMU_NEW_OBJECT); } txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg == 0) return (ENOSPC); ASSERT3U(dmu_objset_zil(os)->zl_replay, ==, !!lr->lr_foid); bonuslen = DN_BONUS_SIZE(lr->lrz_dnodesize); if (lr->lrz_type == DMU_OT_ZAP_OTHER) { if (lr->lr_foid == 0) { lr->lr_foid = zap_create_dnsize(os, lr->lrz_type, lr->lrz_bonustype, bonuslen, lr->lrz_dnodesize, tx); } else { error = zap_create_claim_dnsize(os, lr->lr_foid, lr->lrz_type, lr->lrz_bonustype, bonuslen, lr->lrz_dnodesize, tx); } } else { if (lr->lr_foid == 0) { lr->lr_foid = dmu_object_alloc_dnsize(os, lr->lrz_type, 0, lr->lrz_bonustype, bonuslen, lr->lrz_dnodesize, tx); } else { error = dmu_object_claim_dnsize(os, lr->lr_foid, lr->lrz_type, 0, lr->lrz_bonustype, bonuslen, lr->lrz_dnodesize, tx); } } if (error) { ASSERT3U(error, ==, EEXIST); ASSERT(zd->zd_zilog->zl_replay); dmu_tx_commit(tx); return (error); } ASSERT3U(lr->lr_foid, !=, 0); if (lr->lrz_type != DMU_OT_ZAP_OTHER) VERIFY0(dmu_object_set_blocksize(os, lr->lr_foid, lr->lrz_blocksize, lr->lrz_ibshift, tx)); VERIFY0(dmu_bonus_hold(os, lr->lr_foid, FTAG, &db)); bbt = ztest_bt_bonus(db); dmu_buf_will_dirty(db, tx); ztest_bt_generate(bbt, os, lr->lr_foid, lr->lrz_dnodesize, -1ULL, lr->lr_gen, txg, txg); ztest_fill_unused_bonus(db, bbt, lr->lr_foid, os, lr->lr_gen); dmu_buf_rele(db, FTAG); VERIFY0(zap_add(os, lr->lr_doid, name, sizeof (uint64_t), 1, &lr->lr_foid, tx)); (void) ztest_log_create(zd, tx, lr); dmu_tx_commit(tx); return (0); } static int ztest_replay_remove(void *arg1, void *arg2, boolean_t byteswap) { ztest_ds_t *zd = arg1; lr_remove_t *lr = arg2; char *name = (void *)(lr + 1); /* name follows lr */ objset_t *os = zd->zd_os; dmu_object_info_t doi; dmu_tx_t *tx; uint64_t object, txg; if (byteswap) byteswap_uint64_array(lr, sizeof (*lr)); ASSERT3U(lr->lr_doid, ==, ZTEST_DIROBJ); ASSERT3S(name[0], !=, '\0'); VERIFY0( zap_lookup(os, lr->lr_doid, name, sizeof (object), 1, &object)); ASSERT3U(object, !=, 0); ztest_object_lock(zd, object, ZTRL_WRITER); VERIFY0(dmu_object_info(os, object, &doi)); tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, lr->lr_doid, B_FALSE, name); dmu_tx_hold_free(tx, object, 0, DMU_OBJECT_END); txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg == 0) { ztest_object_unlock(zd, object); return (ENOSPC); } if (doi.doi_type == DMU_OT_ZAP_OTHER) { VERIFY0(zap_destroy(os, object, tx)); } else { VERIFY0(dmu_object_free(os, object, tx)); } VERIFY0(zap_remove(os, lr->lr_doid, name, tx)); (void) ztest_log_remove(zd, tx, lr, object); dmu_tx_commit(tx); ztest_object_unlock(zd, object); return (0); } static int ztest_replay_write(void *arg1, void *arg2, boolean_t byteswap) { ztest_ds_t *zd = arg1; lr_write_t *lr = arg2; objset_t *os = zd->zd_os; void *data = lr + 1; /* data follows lr */ uint64_t offset, length; ztest_block_tag_t *bt = data; ztest_block_tag_t *bbt; uint64_t gen, txg, lrtxg, crtxg; dmu_object_info_t doi; dmu_tx_t *tx; dmu_buf_t *db; arc_buf_t *abuf = NULL; rl_t *rl; if (byteswap) byteswap_uint64_array(lr, sizeof (*lr)); offset = lr->lr_offset; length = lr->lr_length; /* If it's a dmu_sync() block, write the whole block */ if (lr->lr_common.lrc_reclen == sizeof (lr_write_t)) { uint64_t blocksize = BP_GET_LSIZE(&lr->lr_blkptr); if (length < blocksize) { offset -= offset % blocksize; length = blocksize; } } if (bt->bt_magic == BSWAP_64(BT_MAGIC)) byteswap_uint64_array(bt, sizeof (*bt)); if (bt->bt_magic != BT_MAGIC) bt = NULL; ztest_object_lock(zd, lr->lr_foid, ZTRL_READER); rl = ztest_range_lock(zd, lr->lr_foid, offset, length, ZTRL_WRITER); VERIFY0(dmu_bonus_hold(os, lr->lr_foid, FTAG, &db)); dmu_object_info_from_db(db, &doi); bbt = ztest_bt_bonus(db); ASSERT3U(bbt->bt_magic, ==, BT_MAGIC); gen = bbt->bt_gen; crtxg = bbt->bt_crtxg; lrtxg = lr->lr_common.lrc_txg; tx = dmu_tx_create(os); dmu_tx_hold_write(tx, lr->lr_foid, offset, length); if (ztest_random(8) == 0 && length == doi.doi_data_block_size && P2PHASE(offset, length) == 0) abuf = dmu_request_arcbuf(db, length); txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg == 0) { if (abuf != NULL) dmu_return_arcbuf(abuf); dmu_buf_rele(db, FTAG); ztest_range_unlock(rl); ztest_object_unlock(zd, lr->lr_foid); return (ENOSPC); } if (bt != NULL) { /* * Usually, verify the old data before writing new data -- * but not always, because we also want to verify correct * behavior when the data was not recently read into cache. */ ASSERT(doi.doi_data_block_size); ASSERT0(offset % doi.doi_data_block_size); if (ztest_random(4) != 0) { int prefetch = ztest_random(2) ? DMU_READ_PREFETCH : DMU_READ_NO_PREFETCH; ztest_block_tag_t rbt; VERIFY(dmu_read(os, lr->lr_foid, offset, sizeof (rbt), &rbt, prefetch) == 0); if (rbt.bt_magic == BT_MAGIC) { ztest_bt_verify(&rbt, os, lr->lr_foid, 0, offset, gen, txg, crtxg); } } /* * Writes can appear to be newer than the bonus buffer because * the ztest_get_data() callback does a dmu_read() of the * open-context data, which may be different than the data * as it was when the write was generated. */ if (zd->zd_zilog->zl_replay) { ztest_bt_verify(bt, os, lr->lr_foid, 0, offset, MAX(gen, bt->bt_gen), MAX(txg, lrtxg), bt->bt_crtxg); } /* * Set the bt's gen/txg to the bonus buffer's gen/txg * so that all of the usual ASSERTs will work. */ ztest_bt_generate(bt, os, lr->lr_foid, 0, offset, gen, txg, crtxg); } if (abuf == NULL) { dmu_write(os, lr->lr_foid, offset, length, data, tx); } else { memcpy(abuf->b_data, data, length); VERIFY0(dmu_assign_arcbuf_by_dbuf(db, offset, abuf, tx)); } (void) ztest_log_write(zd, tx, lr); dmu_buf_rele(db, FTAG); dmu_tx_commit(tx); ztest_range_unlock(rl); ztest_object_unlock(zd, lr->lr_foid); return (0); } static int ztest_replay_truncate(void *arg1, void *arg2, boolean_t byteswap) { ztest_ds_t *zd = arg1; lr_truncate_t *lr = arg2; objset_t *os = zd->zd_os; dmu_tx_t *tx; uint64_t txg; rl_t *rl; if (byteswap) byteswap_uint64_array(lr, sizeof (*lr)); ztest_object_lock(zd, lr->lr_foid, ZTRL_READER); rl = ztest_range_lock(zd, lr->lr_foid, lr->lr_offset, lr->lr_length, ZTRL_WRITER); tx = dmu_tx_create(os); dmu_tx_hold_free(tx, lr->lr_foid, lr->lr_offset, lr->lr_length); txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg == 0) { ztest_range_unlock(rl); ztest_object_unlock(zd, lr->lr_foid); return (ENOSPC); } VERIFY0(dmu_free_range(os, lr->lr_foid, lr->lr_offset, lr->lr_length, tx)); (void) ztest_log_truncate(zd, tx, lr); dmu_tx_commit(tx); ztest_range_unlock(rl); ztest_object_unlock(zd, lr->lr_foid); return (0); } static int ztest_replay_setattr(void *arg1, void *arg2, boolean_t byteswap) { ztest_ds_t *zd = arg1; lr_setattr_t *lr = arg2; objset_t *os = zd->zd_os; dmu_tx_t *tx; dmu_buf_t *db; ztest_block_tag_t *bbt; uint64_t txg, lrtxg, crtxg, dnodesize; if (byteswap) byteswap_uint64_array(lr, sizeof (*lr)); ztest_object_lock(zd, lr->lr_foid, ZTRL_WRITER); VERIFY0(dmu_bonus_hold(os, lr->lr_foid, FTAG, &db)); tx = dmu_tx_create(os); dmu_tx_hold_bonus(tx, lr->lr_foid); txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg == 0) { dmu_buf_rele(db, FTAG); ztest_object_unlock(zd, lr->lr_foid); return (ENOSPC); } bbt = ztest_bt_bonus(db); ASSERT3U(bbt->bt_magic, ==, BT_MAGIC); crtxg = bbt->bt_crtxg; lrtxg = lr->lr_common.lrc_txg; dnodesize = bbt->bt_dnodesize; if (zd->zd_zilog->zl_replay) { ASSERT3U(lr->lr_size, !=, 0); ASSERT3U(lr->lr_mode, !=, 0); ASSERT3U(lrtxg, !=, 0); } else { /* * Randomly change the size and increment the generation. */ lr->lr_size = (ztest_random(db->db_size / sizeof (*bbt)) + 1) * sizeof (*bbt); lr->lr_mode = bbt->bt_gen + 1; ASSERT0(lrtxg); } /* * Verify that the current bonus buffer is not newer than our txg. */ ztest_bt_verify(bbt, os, lr->lr_foid, dnodesize, -1ULL, lr->lr_mode, MAX(txg, lrtxg), crtxg); dmu_buf_will_dirty(db, tx); ASSERT3U(lr->lr_size, >=, sizeof (*bbt)); ASSERT3U(lr->lr_size, <=, db->db_size); VERIFY0(dmu_set_bonus(db, lr->lr_size, tx)); bbt = ztest_bt_bonus(db); ztest_bt_generate(bbt, os, lr->lr_foid, dnodesize, -1ULL, lr->lr_mode, txg, crtxg); ztest_fill_unused_bonus(db, bbt, lr->lr_foid, os, bbt->bt_gen); dmu_buf_rele(db, FTAG); (void) ztest_log_setattr(zd, tx, lr); dmu_tx_commit(tx); ztest_object_unlock(zd, lr->lr_foid); return (0); } static zil_replay_func_t *ztest_replay_vector[TX_MAX_TYPE] = { NULL, /* 0 no such transaction type */ ztest_replay_create, /* TX_CREATE */ NULL, /* TX_MKDIR */ NULL, /* TX_MKXATTR */ NULL, /* TX_SYMLINK */ ztest_replay_remove, /* TX_REMOVE */ NULL, /* TX_RMDIR */ NULL, /* TX_LINK */ NULL, /* TX_RENAME */ ztest_replay_write, /* TX_WRITE */ ztest_replay_truncate, /* TX_TRUNCATE */ ztest_replay_setattr, /* TX_SETATTR */ NULL, /* TX_ACL */ NULL, /* TX_CREATE_ACL */ NULL, /* TX_CREATE_ATTR */ NULL, /* TX_CREATE_ACL_ATTR */ NULL, /* TX_MKDIR_ACL */ NULL, /* TX_MKDIR_ATTR */ NULL, /* TX_MKDIR_ACL_ATTR */ NULL, /* TX_WRITE2 */ NULL, /* TX_SETSAXATTR */ NULL, /* TX_RENAME_EXCHANGE */ NULL, /* TX_RENAME_WHITEOUT */ }; /* * ZIL get_data callbacks */ static void ztest_get_done(zgd_t *zgd, int error) { (void) error; ztest_ds_t *zd = zgd->zgd_private; uint64_t object = ((rl_t *)zgd->zgd_lr)->rl_object; if (zgd->zgd_db) dmu_buf_rele(zgd->zgd_db, zgd); ztest_range_unlock((rl_t *)zgd->zgd_lr); ztest_object_unlock(zd, object); umem_free(zgd, sizeof (*zgd)); } static int ztest_get_data(void *arg, uint64_t arg2, lr_write_t *lr, char *buf, struct lwb *lwb, zio_t *zio) { (void) arg2; ztest_ds_t *zd = arg; objset_t *os = zd->zd_os; uint64_t object = lr->lr_foid; uint64_t offset = lr->lr_offset; uint64_t size = lr->lr_length; uint64_t txg = lr->lr_common.lrc_txg; uint64_t crtxg; dmu_object_info_t doi; dmu_buf_t *db; zgd_t *zgd; int error; ASSERT3P(lwb, !=, NULL); ASSERT3U(size, !=, 0); ztest_object_lock(zd, object, ZTRL_READER); error = dmu_bonus_hold(os, object, FTAG, &db); if (error) { ztest_object_unlock(zd, object); return (error); } crtxg = ztest_bt_bonus(db)->bt_crtxg; if (crtxg == 0 || crtxg > txg) { dmu_buf_rele(db, FTAG); ztest_object_unlock(zd, object); return (ENOENT); } dmu_object_info_from_db(db, &doi); dmu_buf_rele(db, FTAG); db = NULL; zgd = umem_zalloc(sizeof (*zgd), UMEM_NOFAIL); zgd->zgd_lwb = lwb; zgd->zgd_private = zd; if (buf != NULL) { /* immediate write */ zgd->zgd_lr = (struct zfs_locked_range *)ztest_range_lock(zd, object, offset, size, ZTRL_READER); error = dmu_read(os, object, offset, size, buf, DMU_READ_NO_PREFETCH); ASSERT0(error); } else { ASSERT3P(zio, !=, NULL); size = doi.doi_data_block_size; if (ISP2(size)) { offset = P2ALIGN_TYPED(offset, size, uint64_t); } else { ASSERT3U(offset, <, size); offset = 0; } zgd->zgd_lr = (struct zfs_locked_range *)ztest_range_lock(zd, object, offset, size, ZTRL_READER); error = dmu_buf_hold_noread(os, object, offset, zgd, &db); if (error == 0) { blkptr_t *bp = &lr->lr_blkptr; zgd->zgd_db = db; zgd->zgd_bp = bp; ASSERT3U(db->db_offset, ==, offset); ASSERT3U(db->db_size, ==, size); error = dmu_sync(zio, lr->lr_common.lrc_txg, ztest_get_done, zgd); if (error == 0) return (0); } } ztest_get_done(zgd, error); return (error); } static void * ztest_lr_alloc(size_t lrsize, char *name) { char *lr; size_t namesize = name ? strlen(name) + 1 : 0; lr = umem_zalloc(lrsize + namesize, UMEM_NOFAIL); if (name) memcpy(lr + lrsize, name, namesize); return (lr); } static void ztest_lr_free(void *lr, size_t lrsize, char *name) { size_t namesize = name ? strlen(name) + 1 : 0; umem_free(lr, lrsize + namesize); } /* * Lookup a bunch of objects. Returns the number of objects not found. */ static int ztest_lookup(ztest_ds_t *zd, ztest_od_t *od, int count) { int missing = 0; int error; int i; ASSERT(MUTEX_HELD(&zd->zd_dirobj_lock)); for (i = 0; i < count; i++, od++) { od->od_object = 0; error = zap_lookup(zd->zd_os, od->od_dir, od->od_name, sizeof (uint64_t), 1, &od->od_object); if (error) { ASSERT3S(error, ==, ENOENT); ASSERT0(od->od_object); missing++; } else { dmu_buf_t *db; ztest_block_tag_t *bbt; dmu_object_info_t doi; ASSERT3U(od->od_object, !=, 0); ASSERT0(missing); /* there should be no gaps */ ztest_object_lock(zd, od->od_object, ZTRL_READER); VERIFY0(dmu_bonus_hold(zd->zd_os, od->od_object, FTAG, &db)); dmu_object_info_from_db(db, &doi); bbt = ztest_bt_bonus(db); ASSERT3U(bbt->bt_magic, ==, BT_MAGIC); od->od_type = doi.doi_type; od->od_blocksize = doi.doi_data_block_size; od->od_gen = bbt->bt_gen; dmu_buf_rele(db, FTAG); ztest_object_unlock(zd, od->od_object); } } return (missing); } static int ztest_create(ztest_ds_t *zd, ztest_od_t *od, int count) { int missing = 0; int i; ASSERT(MUTEX_HELD(&zd->zd_dirobj_lock)); for (i = 0; i < count; i++, od++) { if (missing) { od->od_object = 0; missing++; continue; } lr_create_t *lr = ztest_lr_alloc(sizeof (*lr), od->od_name); lr->lr_doid = od->od_dir; lr->lr_foid = 0; /* 0 to allocate, > 0 to claim */ lr->lrz_type = od->od_crtype; lr->lrz_blocksize = od->od_crblocksize; lr->lrz_ibshift = ztest_random_ibshift(); lr->lrz_bonustype = DMU_OT_UINT64_OTHER; lr->lrz_dnodesize = od->od_crdnodesize; lr->lr_gen = od->od_crgen; lr->lr_crtime[0] = time(NULL); if (ztest_replay_create(zd, lr, B_FALSE) != 0) { ASSERT0(missing); od->od_object = 0; missing++; } else { od->od_object = lr->lr_foid; od->od_type = od->od_crtype; od->od_blocksize = od->od_crblocksize; od->od_gen = od->od_crgen; ASSERT3U(od->od_object, !=, 0); } ztest_lr_free(lr, sizeof (*lr), od->od_name); } return (missing); } static int ztest_remove(ztest_ds_t *zd, ztest_od_t *od, int count) { int missing = 0; int error; int i; ASSERT(MUTEX_HELD(&zd->zd_dirobj_lock)); od += count - 1; for (i = count - 1; i >= 0; i--, od--) { if (missing) { missing++; continue; } /* * No object was found. */ if (od->od_object == 0) continue; lr_remove_t *lr = ztest_lr_alloc(sizeof (*lr), od->od_name); lr->lr_doid = od->od_dir; if ((error = ztest_replay_remove(zd, lr, B_FALSE)) != 0) { ASSERT3U(error, ==, ENOSPC); missing++; } else { od->od_object = 0; } ztest_lr_free(lr, sizeof (*lr), od->od_name); } return (missing); } static int ztest_write(ztest_ds_t *zd, uint64_t object, uint64_t offset, uint64_t size, const void *data) { lr_write_t *lr; int error; lr = ztest_lr_alloc(sizeof (*lr) + size, NULL); lr->lr_foid = object; lr->lr_offset = offset; lr->lr_length = size; lr->lr_blkoff = 0; BP_ZERO(&lr->lr_blkptr); memcpy(lr + 1, data, size); error = ztest_replay_write(zd, lr, B_FALSE); ztest_lr_free(lr, sizeof (*lr) + size, NULL); return (error); } static int ztest_truncate(ztest_ds_t *zd, uint64_t object, uint64_t offset, uint64_t size) { lr_truncate_t *lr; int error; lr = ztest_lr_alloc(sizeof (*lr), NULL); lr->lr_foid = object; lr->lr_offset = offset; lr->lr_length = size; error = ztest_replay_truncate(zd, lr, B_FALSE); ztest_lr_free(lr, sizeof (*lr), NULL); return (error); } static int ztest_setattr(ztest_ds_t *zd, uint64_t object) { lr_setattr_t *lr; int error; lr = ztest_lr_alloc(sizeof (*lr), NULL); lr->lr_foid = object; lr->lr_size = 0; lr->lr_mode = 0; error = ztest_replay_setattr(zd, lr, B_FALSE); ztest_lr_free(lr, sizeof (*lr), NULL); return (error); } static void ztest_prealloc(ztest_ds_t *zd, uint64_t object, uint64_t offset, uint64_t size) { objset_t *os = zd->zd_os; dmu_tx_t *tx; uint64_t txg; rl_t *rl; txg_wait_synced(dmu_objset_pool(os), 0); ztest_object_lock(zd, object, ZTRL_READER); rl = ztest_range_lock(zd, object, offset, size, ZTRL_WRITER); tx = dmu_tx_create(os); dmu_tx_hold_write(tx, object, offset, size); txg = ztest_tx_assign(tx, TXG_WAIT, FTAG); if (txg != 0) { dmu_prealloc(os, object, offset, size, tx); dmu_tx_commit(tx); txg_wait_synced(dmu_objset_pool(os), txg); } else { (void) dmu_free_long_range(os, object, offset, size); } ztest_range_unlock(rl); ztest_object_unlock(zd, object); } static void ztest_io(ztest_ds_t *zd, uint64_t object, uint64_t offset) { int err; ztest_block_tag_t wbt; dmu_object_info_t doi; enum ztest_io_type io_type; uint64_t blocksize; void *data; VERIFY0(dmu_object_info(zd->zd_os, object, &doi)); blocksize = doi.doi_data_block_size; data = umem_alloc(blocksize, UMEM_NOFAIL); /* * Pick an i/o type at random, biased toward writing block tags. */ io_type = ztest_random(ZTEST_IO_TYPES); if (ztest_random(2) == 0) io_type = ZTEST_IO_WRITE_TAG; (void) pthread_rwlock_rdlock(&zd->zd_zilog_lock); switch (io_type) { case ZTEST_IO_WRITE_TAG: ztest_bt_generate(&wbt, zd->zd_os, object, doi.doi_dnodesize, offset, 0, 0, 0); (void) ztest_write(zd, object, offset, sizeof (wbt), &wbt); break; case ZTEST_IO_WRITE_PATTERN: (void) memset(data, 'a' + (object + offset) % 5, blocksize); if (ztest_random(2) == 0) { /* * Induce fletcher2 collisions to ensure that * zio_ddt_collision() detects and resolves them * when using fletcher2-verify for deduplication. */ ((uint64_t *)data)[0] ^= 1ULL << 63; ((uint64_t *)data)[4] ^= 1ULL << 63; } (void) ztest_write(zd, object, offset, blocksize, data); break; case ZTEST_IO_WRITE_ZEROES: memset(data, 0, blocksize); (void) ztest_write(zd, object, offset, blocksize, data); break; case ZTEST_IO_TRUNCATE: (void) ztest_truncate(zd, object, offset, blocksize); break; case ZTEST_IO_SETATTR: (void) ztest_setattr(zd, object); break; default: break; case ZTEST_IO_REWRITE: (void) pthread_rwlock_rdlock(&ztest_name_lock); err = ztest_dsl_prop_set_uint64(zd->zd_name, ZFS_PROP_CHECKSUM, spa_dedup_checksum(ztest_spa), B_FALSE); ASSERT(err == 0 || err == ENOSPC); err = ztest_dsl_prop_set_uint64(zd->zd_name, ZFS_PROP_COMPRESSION, ztest_random_dsl_prop(ZFS_PROP_COMPRESSION), B_FALSE); ASSERT(err == 0 || err == ENOSPC); (void) pthread_rwlock_unlock(&ztest_name_lock); VERIFY0(dmu_read(zd->zd_os, object, offset, blocksize, data, DMU_READ_NO_PREFETCH)); (void) ztest_write(zd, object, offset, blocksize, data); break; } (void) pthread_rwlock_unlock(&zd->zd_zilog_lock); umem_free(data, blocksize); } /* * Initialize an object description template. */ static void ztest_od_init(ztest_od_t *od, uint64_t id, const char *tag, uint64_t index, dmu_object_type_t type, uint64_t blocksize, uint64_t dnodesize, uint64_t gen) { od->od_dir = ZTEST_DIROBJ; od->od_object = 0; od->od_crtype = type; od->od_crblocksize = blocksize ? blocksize : ztest_random_blocksize(); od->od_crdnodesize = dnodesize ? dnodesize : ztest_random_dnodesize(); od->od_crgen = gen; od->od_type = DMU_OT_NONE; od->od_blocksize = 0; od->od_gen = 0; (void) snprintf(od->od_name, sizeof (od->od_name), "%s(%"PRId64")[%"PRIu64"]", tag, id, index); } /* * Lookup or create the objects for a test using the od template. * If the objects do not all exist, or if 'remove' is specified, * remove any existing objects and create new ones. Otherwise, * use the existing objects. */ static int ztest_object_init(ztest_ds_t *zd, ztest_od_t *od, size_t size, boolean_t remove) { int count = size / sizeof (*od); int rv = 0; mutex_enter(&zd->zd_dirobj_lock); if ((ztest_lookup(zd, od, count) != 0 || remove) && (ztest_remove(zd, od, count) != 0 || ztest_create(zd, od, count) != 0)) rv = -1; zd->zd_od = od; mutex_exit(&zd->zd_dirobj_lock); return (rv); } void ztest_zil_commit(ztest_ds_t *zd, uint64_t id) { (void) id; zilog_t *zilog = zd->zd_zilog; (void) pthread_rwlock_rdlock(&zd->zd_zilog_lock); zil_commit(zilog, ztest_random(ZTEST_OBJECTS)); /* * Remember the committed values in zd, which is in parent/child * shared memory. If we die, the next iteration of ztest_run() * will verify that the log really does contain this record. */ mutex_enter(&zilog->zl_lock); ASSERT3P(zd->zd_shared, !=, NULL); ASSERT3U(zd->zd_shared->zd_seq, <=, zilog->zl_commit_lr_seq); zd->zd_shared->zd_seq = zilog->zl_commit_lr_seq; mutex_exit(&zilog->zl_lock); (void) pthread_rwlock_unlock(&zd->zd_zilog_lock); } /* * This function is designed to simulate the operations that occur during a * mount/unmount operation. We hold the dataset across these operations in an * attempt to expose any implicit assumptions about ZIL management. */ void ztest_zil_remount(ztest_ds_t *zd, uint64_t id) { (void) id; objset_t *os = zd->zd_os; /* * We hold the ztest_vdev_lock so we don't cause problems with * other threads that wish to remove a log device, such as * ztest_device_removal(). */ mutex_enter(&ztest_vdev_lock); /* * We grab the zd_dirobj_lock to ensure that no other thread is * updating the zil (i.e. adding in-memory log records) and the * zd_zilog_lock to block any I/O. */ mutex_enter(&zd->zd_dirobj_lock); (void) pthread_rwlock_wrlock(&zd->zd_zilog_lock); /* zfsvfs_teardown() */ zil_close(zd->zd_zilog); /* zfsvfs_setup() */ VERIFY3P(zil_open(os, ztest_get_data, NULL), ==, zd->zd_zilog); zil_replay(os, zd, ztest_replay_vector); (void) pthread_rwlock_unlock(&zd->zd_zilog_lock); mutex_exit(&zd->zd_dirobj_lock); mutex_exit(&ztest_vdev_lock); } /* * Verify that we can't destroy an active pool, create an existing pool, * or create a pool with a bad vdev spec. */ void ztest_spa_create_destroy(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_opts_t *zo = &ztest_opts; spa_t *spa; nvlist_t *nvroot; if (zo->zo_mmp_test) return; /* * Attempt to create using a bad file. */ nvroot = make_vdev_root("/dev/bogus", NULL, NULL, 0, 0, NULL, 0, 0, 1); VERIFY3U(ENOENT, ==, spa_create("ztest_bad_file", nvroot, NULL, NULL, NULL)); fnvlist_free(nvroot); /* * Attempt to create using a bad mirror. */ nvroot = make_vdev_root("/dev/bogus", NULL, NULL, 0, 0, NULL, 0, 2, 1); VERIFY3U(ENOENT, ==, spa_create("ztest_bad_mirror", nvroot, NULL, NULL, NULL)); fnvlist_free(nvroot); /* * Attempt to create an existing pool. It shouldn't matter * what's in the nvroot; we should fail with EEXIST. */ (void) pthread_rwlock_rdlock(&ztest_name_lock); nvroot = make_vdev_root("/dev/bogus", NULL, NULL, 0, 0, NULL, 0, 0, 1); VERIFY3U(EEXIST, ==, spa_create(zo->zo_pool, nvroot, NULL, NULL, NULL)); fnvlist_free(nvroot); /* * We open a reference to the spa and then we try to export it * expecting one of the following errors: * * EBUSY * Because of the reference we just opened. * * ZFS_ERR_EXPORT_IN_PROGRESS * For the case that there is another ztest thread doing * an export concurrently. */ VERIFY0(spa_open(zo->zo_pool, &spa, FTAG)); int error = spa_destroy(zo->zo_pool); if (error != EBUSY && error != ZFS_ERR_EXPORT_IN_PROGRESS) { fatal(B_FALSE, "spa_destroy(%s) returned unexpected value %d", spa->spa_name, error); } spa_close(spa, FTAG); (void) pthread_rwlock_unlock(&ztest_name_lock); } /* * Start and then stop the MMP threads to ensure the startup and shutdown code * works properly. Actual protection and property-related code tested via ZTS. */ void ztest_mmp_enable_disable(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_opts_t *zo = &ztest_opts; spa_t *spa = ztest_spa; if (zo->zo_mmp_test) return; /* * Since enabling MMP involves setting a property, it could not be done * while the pool is suspended. */ if (spa_suspended(spa)) return; spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); mutex_enter(&spa->spa_props_lock); zfs_multihost_fail_intervals = 0; if (!spa_multihost(spa)) { spa->spa_multihost = B_TRUE; mmp_thread_start(spa); } mutex_exit(&spa->spa_props_lock); spa_config_exit(spa, SCL_CONFIG, FTAG); txg_wait_synced(spa_get_dsl(spa), 0); mmp_signal_all_threads(); txg_wait_synced(spa_get_dsl(spa), 0); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); mutex_enter(&spa->spa_props_lock); if (spa_multihost(spa)) { mmp_thread_stop(spa); spa->spa_multihost = B_FALSE; } mutex_exit(&spa->spa_props_lock); spa_config_exit(spa, SCL_CONFIG, FTAG); } static int ztest_get_raidz_children(spa_t *spa) { (void) spa; vdev_t *raidvd; ASSERT(MUTEX_HELD(&ztest_vdev_lock)); if (ztest_opts.zo_raid_do_expand) { raidvd = ztest_spa->spa_root_vdev->vdev_child[0]; ASSERT(raidvd->vdev_ops == &vdev_raidz_ops); return (raidvd->vdev_children); } return (ztest_opts.zo_raid_children); } void ztest_spa_upgrade(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa; uint64_t initial_version = SPA_VERSION_INITIAL; uint64_t raidz_children, version, newversion; nvlist_t *nvroot, *props; char *name; if (ztest_opts.zo_mmp_test) return; /* dRAID added after feature flags, skip upgrade test. */ if (strcmp(ztest_opts.zo_raid_type, VDEV_TYPE_DRAID) == 0) return; mutex_enter(&ztest_vdev_lock); name = kmem_asprintf("%s_upgrade", ztest_opts.zo_pool); /* * Clean up from previous runs. */ (void) spa_destroy(name); raidz_children = ztest_get_raidz_children(ztest_spa); nvroot = make_vdev_root(NULL, NULL, name, ztest_opts.zo_vdev_size, 0, NULL, raidz_children, ztest_opts.zo_mirrors, 1); /* * If we're configuring a RAIDZ device then make sure that the * initial version is capable of supporting that feature. */ switch (ztest_opts.zo_raid_parity) { case 0: case 1: initial_version = SPA_VERSION_INITIAL; break; case 2: initial_version = SPA_VERSION_RAIDZ2; break; case 3: initial_version = SPA_VERSION_RAIDZ3; break; } /* * Create a pool with a spa version that can be upgraded. Pick * a value between initial_version and SPA_VERSION_BEFORE_FEATURES. */ do { version = ztest_random_spa_version(initial_version); } while (version > SPA_VERSION_BEFORE_FEATURES); props = fnvlist_alloc(); fnvlist_add_uint64(props, zpool_prop_to_name(ZPOOL_PROP_VERSION), version); VERIFY0(spa_create(name, nvroot, props, NULL, NULL)); fnvlist_free(nvroot); fnvlist_free(props); VERIFY0(spa_open(name, &spa, FTAG)); VERIFY3U(spa_version(spa), ==, version); newversion = ztest_random_spa_version(version + 1); if (ztest_opts.zo_verbose >= 4) { (void) printf("upgrading spa version from " "%"PRIu64" to %"PRIu64"\n", version, newversion); } spa_upgrade(spa, newversion); VERIFY3U(spa_version(spa), >, version); VERIFY3U(spa_version(spa), ==, fnvlist_lookup_uint64(spa->spa_config, zpool_prop_to_name(ZPOOL_PROP_VERSION))); spa_close(spa, FTAG); kmem_strfree(name); mutex_exit(&ztest_vdev_lock); } static void ztest_spa_checkpoint(spa_t *spa) { ASSERT(MUTEX_HELD(&ztest_checkpoint_lock)); int error = spa_checkpoint(spa->spa_name); switch (error) { case 0: case ZFS_ERR_DEVRM_IN_PROGRESS: case ZFS_ERR_DISCARDING_CHECKPOINT: case ZFS_ERR_CHECKPOINT_EXISTS: case ZFS_ERR_RAIDZ_EXPAND_IN_PROGRESS: break; case ENOSPC: ztest_record_enospc(FTAG); break; default: fatal(B_FALSE, "spa_checkpoint(%s) = %d", spa->spa_name, error); } } static void ztest_spa_discard_checkpoint(spa_t *spa) { ASSERT(MUTEX_HELD(&ztest_checkpoint_lock)); int error = spa_checkpoint_discard(spa->spa_name); switch (error) { case 0: case ZFS_ERR_DISCARDING_CHECKPOINT: case ZFS_ERR_NO_CHECKPOINT: break; default: fatal(B_FALSE, "spa_discard_checkpoint(%s) = %d", spa->spa_name, error); } } void ztest_spa_checkpoint_create_discard(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; mutex_enter(&ztest_checkpoint_lock); if (ztest_random(2) == 0) { ztest_spa_checkpoint(spa); } else { ztest_spa_discard_checkpoint(spa); } mutex_exit(&ztest_checkpoint_lock); } static vdev_t * vdev_lookup_by_path(vdev_t *vd, const char *path) { vdev_t *mvd; int c; if (vd->vdev_path != NULL && strcmp(path, vd->vdev_path) == 0) return (vd); for (c = 0; c < vd->vdev_children; c++) if ((mvd = vdev_lookup_by_path(vd->vdev_child[c], path)) != NULL) return (mvd); return (NULL); } static int spa_num_top_vdevs(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; ASSERT3U(spa_config_held(spa, SCL_VDEV, RW_READER), ==, SCL_VDEV); return (rvd->vdev_children); } /* * Verify that vdev_add() works as expected. */ void ztest_vdev_add_remove(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; uint64_t leaves; uint64_t guid; uint64_t raidz_children; nvlist_t *nvroot; int error; if (ztest_opts.zo_mmp_test) return; mutex_enter(&ztest_vdev_lock); raidz_children = ztest_get_raidz_children(spa); leaves = MAX(zs->zs_mirrors + zs->zs_splits, 1) * raidz_children; spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); ztest_shared->zs_vdev_next_leaf = spa_num_top_vdevs(spa) * leaves; /* * If we have slogs then remove them 1/4 of the time. */ if (spa_has_slogs(spa) && ztest_random(4) == 0) { metaslab_group_t *mg; /* * find the first real slog in log allocation class */ mg = spa_log_class(spa)->mc_allocator[0].mca_rotor; while (!mg->mg_vd->vdev_islog) mg = mg->mg_next; guid = mg->mg_vd->vdev_guid; spa_config_exit(spa, SCL_VDEV, FTAG); /* * We have to grab the zs_name_lock as writer to * prevent a race between removing a slog (dmu_objset_find) * and destroying a dataset. Removing the slog will * grab a reference on the dataset which may cause * dsl_destroy_head() to fail with EBUSY thus * leaving the dataset in an inconsistent state. */ pthread_rwlock_wrlock(&ztest_name_lock); error = spa_vdev_remove(spa, guid, B_FALSE); pthread_rwlock_unlock(&ztest_name_lock); switch (error) { case 0: case EEXIST: /* Generic zil_reset() error */ case EBUSY: /* Replay required */ case EACCES: /* Crypto key not loaded */ case ZFS_ERR_CHECKPOINT_EXISTS: case ZFS_ERR_DISCARDING_CHECKPOINT: break; default: fatal(B_FALSE, "spa_vdev_remove() = %d", error); } } else { spa_config_exit(spa, SCL_VDEV, FTAG); /* * Make 1/4 of the devices be log devices */ nvroot = make_vdev_root(NULL, NULL, NULL, ztest_opts.zo_vdev_size, 0, (ztest_random(4) == 0) ? "log" : NULL, raidz_children, zs->zs_mirrors, 1); error = spa_vdev_add(spa, nvroot, B_FALSE); fnvlist_free(nvroot); switch (error) { case 0: break; case ENOSPC: ztest_record_enospc("spa_vdev_add"); break; default: fatal(B_FALSE, "spa_vdev_add() = %d", error); } } mutex_exit(&ztest_vdev_lock); } void ztest_vdev_class_add(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; uint64_t leaves; nvlist_t *nvroot; uint64_t raidz_children; const char *class = (ztest_random(2) == 0) ? VDEV_ALLOC_BIAS_SPECIAL : VDEV_ALLOC_BIAS_DEDUP; int error; /* * By default add a special vdev 50% of the time */ if ((ztest_opts.zo_special_vdevs == ZTEST_VDEV_CLASS_OFF) || (ztest_opts.zo_special_vdevs == ZTEST_VDEV_CLASS_RND && ztest_random(2) == 0)) { return; } mutex_enter(&ztest_vdev_lock); /* Only test with mirrors */ if (zs->zs_mirrors < 2) { mutex_exit(&ztest_vdev_lock); return; } /* requires feature@allocation_classes */ if (!spa_feature_is_enabled(spa, SPA_FEATURE_ALLOCATION_CLASSES)) { mutex_exit(&ztest_vdev_lock); return; } raidz_children = ztest_get_raidz_children(spa); leaves = MAX(zs->zs_mirrors + zs->zs_splits, 1) * raidz_children; spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); ztest_shared->zs_vdev_next_leaf = spa_num_top_vdevs(spa) * leaves; spa_config_exit(spa, SCL_VDEV, FTAG); nvroot = make_vdev_root(NULL, NULL, NULL, ztest_opts.zo_vdev_size, 0, class, raidz_children, zs->zs_mirrors, 1); error = spa_vdev_add(spa, nvroot, B_FALSE); fnvlist_free(nvroot); if (error == ENOSPC) ztest_record_enospc("spa_vdev_add"); else if (error != 0) fatal(B_FALSE, "spa_vdev_add() = %d", error); /* * 50% of the time allow small blocks in the special class */ if (error == 0 && spa_special_class(spa)->mc_groups == 1 && ztest_random(2) == 0) { if (ztest_opts.zo_verbose >= 3) (void) printf("Enabling special VDEV small blocks\n"); error = ztest_dsl_prop_set_uint64(zd->zd_name, ZFS_PROP_SPECIAL_SMALL_BLOCKS, 32768, B_FALSE); ASSERT(error == 0 || error == ENOSPC); } mutex_exit(&ztest_vdev_lock); if (ztest_opts.zo_verbose >= 3) { metaslab_class_t *mc; if (strcmp(class, VDEV_ALLOC_BIAS_SPECIAL) == 0) mc = spa_special_class(spa); else mc = spa_dedup_class(spa); (void) printf("Added a %s mirrored vdev (of %d)\n", class, (int)mc->mc_groups); } } /* * Verify that adding/removing aux devices (l2arc, hot spare) works as expected. */ void ztest_vdev_aux_add_remove(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; vdev_t *rvd = spa->spa_root_vdev; spa_aux_vdev_t *sav; const char *aux; char *path; uint64_t guid = 0; int error, ignore_err = 0; if (ztest_opts.zo_mmp_test) return; path = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); if (ztest_random(2) == 0) { sav = &spa->spa_spares; aux = ZPOOL_CONFIG_SPARES; } else { sav = &spa->spa_l2cache; aux = ZPOOL_CONFIG_L2CACHE; } mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); if (sav->sav_count != 0 && ztest_random(4) == 0) { /* * Pick a random device to remove. */ vdev_t *svd = sav->sav_vdevs[ztest_random(sav->sav_count)]; /* dRAID spares cannot be removed; try anyways to see ENOTSUP */ if (strstr(svd->vdev_path, VDEV_TYPE_DRAID) != NULL) ignore_err = ENOTSUP; guid = svd->vdev_guid; } else { /* * Find an unused device we can add. */ zs->zs_vdev_aux = 0; for (;;) { int c; (void) snprintf(path, MAXPATHLEN, ztest_aux_template, ztest_opts.zo_dir, ztest_opts.zo_pool, aux, zs->zs_vdev_aux); for (c = 0; c < sav->sav_count; c++) if (strcmp(sav->sav_vdevs[c]->vdev_path, path) == 0) break; if (c == sav->sav_count && vdev_lookup_by_path(rvd, path) == NULL) break; zs->zs_vdev_aux++; } } spa_config_exit(spa, SCL_VDEV, FTAG); if (guid == 0) { /* * Add a new device. */ nvlist_t *nvroot = make_vdev_root(NULL, aux, NULL, (ztest_opts.zo_vdev_size * 5) / 4, 0, NULL, 0, 0, 1); error = spa_vdev_add(spa, nvroot, B_FALSE); switch (error) { case 0: break; default: fatal(B_FALSE, "spa_vdev_add(%p) = %d", nvroot, error); } fnvlist_free(nvroot); } else { /* * Remove an existing device. Sometimes, dirty its * vdev state first to make sure we handle removal * of devices that have pending state changes. */ if (ztest_random(2) == 0) (void) vdev_online(spa, guid, 0, NULL); error = spa_vdev_remove(spa, guid, B_FALSE); switch (error) { case 0: case EBUSY: case ZFS_ERR_CHECKPOINT_EXISTS: case ZFS_ERR_DISCARDING_CHECKPOINT: break; default: if (error != ignore_err) fatal(B_FALSE, "spa_vdev_remove(%"PRIu64") = %d", guid, error); } } mutex_exit(&ztest_vdev_lock); umem_free(path, MAXPATHLEN); } /* * split a pool if it has mirror tlvdevs */ void ztest_split_pool(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; vdev_t *rvd = spa->spa_root_vdev; nvlist_t *tree, **child, *config, *split, **schild; uint_t c, children, schildren = 0, lastlogid = 0; int error = 0; if (ztest_opts.zo_mmp_test) return; mutex_enter(&ztest_vdev_lock); /* ensure we have a usable config; mirrors of raidz aren't supported */ if (zs->zs_mirrors < 3 || ztest_opts.zo_raid_children > 1) { mutex_exit(&ztest_vdev_lock); return; } /* clean up the old pool, if any */ (void) spa_destroy("splitp"); spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); /* generate a config from the existing config */ mutex_enter(&spa->spa_props_lock); tree = fnvlist_lookup_nvlist(spa->spa_config, ZPOOL_CONFIG_VDEV_TREE); mutex_exit(&spa->spa_props_lock); VERIFY0(nvlist_lookup_nvlist_array(tree, ZPOOL_CONFIG_CHILDREN, &child, &children)); schild = umem_alloc(rvd->vdev_children * sizeof (nvlist_t *), UMEM_NOFAIL); for (c = 0; c < children; c++) { vdev_t *tvd = rvd->vdev_child[c]; nvlist_t **mchild; uint_t mchildren; if (tvd->vdev_islog || tvd->vdev_ops == &vdev_hole_ops) { schild[schildren] = fnvlist_alloc(); fnvlist_add_string(schild[schildren], ZPOOL_CONFIG_TYPE, VDEV_TYPE_HOLE); fnvlist_add_uint64(schild[schildren], ZPOOL_CONFIG_IS_HOLE, 1); if (lastlogid == 0) lastlogid = schildren; ++schildren; continue; } lastlogid = 0; VERIFY0(nvlist_lookup_nvlist_array(child[c], ZPOOL_CONFIG_CHILDREN, &mchild, &mchildren)); schild[schildren++] = fnvlist_dup(mchild[0]); } /* OK, create a config that can be used to split */ split = fnvlist_alloc(); fnvlist_add_string(split, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT); fnvlist_add_nvlist_array(split, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)schild, lastlogid != 0 ? lastlogid : schildren); config = fnvlist_alloc(); fnvlist_add_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, split); for (c = 0; c < schildren; c++) fnvlist_free(schild[c]); umem_free(schild, rvd->vdev_children * sizeof (nvlist_t *)); fnvlist_free(split); spa_config_exit(spa, SCL_VDEV, FTAG); (void) pthread_rwlock_wrlock(&ztest_name_lock); error = spa_vdev_split_mirror(spa, "splitp", config, NULL, B_FALSE); (void) pthread_rwlock_unlock(&ztest_name_lock); fnvlist_free(config); if (error == 0) { (void) printf("successful split - results:\n"); mutex_enter(&spa_namespace_lock); show_pool_stats(spa); show_pool_stats(spa_lookup("splitp")); mutex_exit(&spa_namespace_lock); ++zs->zs_splits; --zs->zs_mirrors; } mutex_exit(&ztest_vdev_lock); } /* * Verify that we can attach and detach devices. */ void ztest_vdev_attach_detach(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; spa_aux_vdev_t *sav = &spa->spa_spares; vdev_t *rvd = spa->spa_root_vdev; vdev_t *oldvd, *newvd, *pvd; nvlist_t *root; uint64_t leaves; uint64_t leaf, top; uint64_t ashift = ztest_get_ashift(); uint64_t oldguid, pguid; uint64_t oldsize, newsize; uint64_t raidz_children; char *oldpath, *newpath; int replacing; int oldvd_has_siblings = B_FALSE; int newvd_is_spare = B_FALSE; int newvd_is_dspare = B_FALSE; int oldvd_is_log; int oldvd_is_special; int error, expected_error; if (ztest_opts.zo_mmp_test) return; oldpath = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); newpath = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); mutex_enter(&ztest_vdev_lock); raidz_children = ztest_get_raidz_children(spa); leaves = MAX(zs->zs_mirrors, 1) * raidz_children; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); /* * If a vdev is in the process of being removed, its removal may * finish while we are in progress, leading to an unexpected error * value. Don't bother trying to attach while we are in the middle * of removal. */ if (ztest_device_removal_active) { spa_config_exit(spa, SCL_ALL, FTAG); goto out; } /* * RAIDZ leaf VDEV mirrors are not currently supported while a * RAIDZ expansion is in progress. */ if (ztest_opts.zo_raid_do_expand) { spa_config_exit(spa, SCL_ALL, FTAG); goto out; } /* * Decide whether to do an attach or a replace. */ replacing = ztest_random(2); /* * Pick a random top-level vdev. */ top = ztest_random_vdev_top(spa, B_TRUE); /* * Pick a random leaf within it. */ leaf = ztest_random(leaves); /* * Locate this vdev. */ oldvd = rvd->vdev_child[top]; /* pick a child from the mirror */ if (zs->zs_mirrors >= 1) { ASSERT3P(oldvd->vdev_ops, ==, &vdev_mirror_ops); ASSERT3U(oldvd->vdev_children, >=, zs->zs_mirrors); oldvd = oldvd->vdev_child[leaf / raidz_children]; } /* pick a child out of the raidz group */ if (ztest_opts.zo_raid_children > 1) { if (strcmp(oldvd->vdev_ops->vdev_op_type, "raidz") == 0) ASSERT3P(oldvd->vdev_ops, ==, &vdev_raidz_ops); else ASSERT3P(oldvd->vdev_ops, ==, &vdev_draid_ops); oldvd = oldvd->vdev_child[leaf % raidz_children]; } /* * If we're already doing an attach or replace, oldvd may be a * mirror vdev -- in which case, pick a random child. */ while (oldvd->vdev_children != 0) { oldvd_has_siblings = B_TRUE; ASSERT3U(oldvd->vdev_children, >=, 2); oldvd = oldvd->vdev_child[ztest_random(oldvd->vdev_children)]; } oldguid = oldvd->vdev_guid; oldsize = vdev_get_min_asize(oldvd); oldvd_is_log = oldvd->vdev_top->vdev_islog; oldvd_is_special = oldvd->vdev_top->vdev_alloc_bias == VDEV_BIAS_SPECIAL || oldvd->vdev_top->vdev_alloc_bias == VDEV_BIAS_DEDUP; (void) strlcpy(oldpath, oldvd->vdev_path, MAXPATHLEN); pvd = oldvd->vdev_parent; pguid = pvd->vdev_guid; /* * If oldvd has siblings, then half of the time, detach it. Prior * to the detach the pool is scrubbed in order to prevent creating * unrepairable blocks as a result of the data corruption injection. */ if (oldvd_has_siblings && ztest_random(2) == 0) { spa_config_exit(spa, SCL_ALL, FTAG); error = ztest_scrub_impl(spa); if (error) goto out; error = spa_vdev_detach(spa, oldguid, pguid, B_FALSE); if (error != 0 && error != ENODEV && error != EBUSY && error != ENOTSUP && error != ZFS_ERR_CHECKPOINT_EXISTS && error != ZFS_ERR_DISCARDING_CHECKPOINT) fatal(B_FALSE, "detach (%s) returned %d", oldpath, error); goto out; } /* * For the new vdev, choose with equal probability between the two * standard paths (ending in either 'a' or 'b') or a random hot spare. */ if (sav->sav_count != 0 && ztest_random(3) == 0) { newvd = sav->sav_vdevs[ztest_random(sav->sav_count)]; newvd_is_spare = B_TRUE; if (newvd->vdev_ops == &vdev_draid_spare_ops) newvd_is_dspare = B_TRUE; (void) strlcpy(newpath, newvd->vdev_path, MAXPATHLEN); } else { (void) snprintf(newpath, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, ztest_opts.zo_pool, top * leaves + leaf); if (ztest_random(2) == 0) newpath[strlen(newpath) - 1] = 'b'; newvd = vdev_lookup_by_path(rvd, newpath); } if (newvd) { /* * Reopen to ensure the vdev's asize field isn't stale. */ vdev_reopen(newvd); newsize = vdev_get_min_asize(newvd); } else { /* * Make newsize a little bigger or smaller than oldsize. * If it's smaller, the attach should fail. * If it's larger, and we're doing a replace, * we should get dynamic LUN growth when we're done. */ newsize = 10 * oldsize / (9 + ztest_random(3)); } /* * If pvd is not a mirror or root, the attach should fail with ENOTSUP, * unless it's a replace; in that case any non-replacing parent is OK. * * If newvd is already part of the pool, it should fail with EBUSY. * * If newvd is too small, it should fail with EOVERFLOW. * * If newvd is a distributed spare and it's being attached to a * dRAID which is not its parent it should fail with EINVAL. */ if (pvd->vdev_ops != &vdev_mirror_ops && pvd->vdev_ops != &vdev_root_ops && (!replacing || pvd->vdev_ops == &vdev_replacing_ops || pvd->vdev_ops == &vdev_spare_ops)) expected_error = ENOTSUP; else if (newvd_is_spare && (!replacing || oldvd_is_log || oldvd_is_special)) expected_error = ENOTSUP; else if (newvd == oldvd) expected_error = replacing ? 0 : EBUSY; else if (vdev_lookup_by_path(rvd, newpath) != NULL) expected_error = EBUSY; else if (!newvd_is_dspare && newsize < oldsize) expected_error = EOVERFLOW; else if (ashift > oldvd->vdev_top->vdev_ashift) expected_error = EDOM; else if (newvd_is_dspare && pvd != vdev_draid_spare_get_parent(newvd)) expected_error = EINVAL; else expected_error = 0; spa_config_exit(spa, SCL_ALL, FTAG); /* * Build the nvlist describing newpath. */ root = make_vdev_root(newpath, NULL, NULL, newvd == NULL ? newsize : 0, ashift, NULL, 0, 0, 1); /* * When supported select either a healing or sequential resilver. */ boolean_t rebuilding = B_FALSE; if (pvd->vdev_ops == &vdev_mirror_ops || pvd->vdev_ops == &vdev_root_ops) { rebuilding = !!ztest_random(2); } error = spa_vdev_attach(spa, oldguid, root, replacing, rebuilding); fnvlist_free(root); /* * If our parent was the replacing vdev, but the replace completed, * then instead of failing with ENOTSUP we may either succeed, * fail with ENODEV, or fail with EOVERFLOW. */ if (expected_error == ENOTSUP && (error == 0 || error == ENODEV || error == EOVERFLOW)) expected_error = error; /* * If someone grew the LUN, the replacement may be too small. */ if (error == EOVERFLOW || error == EBUSY) expected_error = error; if (error == ZFS_ERR_CHECKPOINT_EXISTS || error == ZFS_ERR_DISCARDING_CHECKPOINT || error == ZFS_ERR_RESILVER_IN_PROGRESS || error == ZFS_ERR_REBUILD_IN_PROGRESS) expected_error = error; if (error != expected_error && expected_error != EBUSY) { fatal(B_FALSE, "attach (%s %"PRIu64", %s %"PRIu64", %d) " "returned %d, expected %d", oldpath, oldsize, newpath, newsize, replacing, error, expected_error); } out: mutex_exit(&ztest_vdev_lock); umem_free(oldpath, MAXPATHLEN); umem_free(newpath, MAXPATHLEN); } static void raidz_scratch_verify(void) { spa_t *spa; uint64_t write_size, logical_size, offset; raidz_reflow_scratch_state_t state; vdev_raidz_expand_t *vre; vdev_t *raidvd; ASSERT(raidz_expand_pause_point == RAIDZ_EXPAND_PAUSE_NONE); if (ztest_scratch_state->zs_raidz_scratch_verify_pause == 0) return; kernel_init(SPA_MODE_READ); mutex_enter(&spa_namespace_lock); spa = spa_lookup(ztest_opts.zo_pool); ASSERT(spa); spa->spa_import_flags |= ZFS_IMPORT_SKIP_MMP; mutex_exit(&spa_namespace_lock); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); ASSERT3U(RRSS_GET_OFFSET(&spa->spa_uberblock), !=, UINT64_MAX); mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_ALL, FTAG, RW_READER); vre = spa->spa_raidz_expand; if (vre == NULL) goto out; raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); offset = RRSS_GET_OFFSET(&spa->spa_uberblock); state = RRSS_GET_STATE(&spa->spa_uberblock); write_size = P2ALIGN_TYPED(VDEV_BOOT_SIZE, 1 << raidvd->vdev_ashift, uint64_t); logical_size = write_size * raidvd->vdev_children; switch (state) { /* * Initial state of reflow process. RAIDZ expansion was * requested by user, but scratch object was not created. */ case RRSS_SCRATCH_NOT_IN_USE: ASSERT3U(offset, ==, 0); break; /* * Scratch object was synced and stored in boot area. */ case RRSS_SCRATCH_VALID: /* * Scratch object was synced back to raidz start offset, * raidz is ready for sector by sector reflow process. */ case RRSS_SCRATCH_INVALID_SYNCED: /* * Scratch object was synced back to raidz start offset * on zpool importing, raidz is ready for sector by sector * reflow process. */ case RRSS_SCRATCH_INVALID_SYNCED_ON_IMPORT: ASSERT3U(offset, ==, logical_size); break; /* * Sector by sector reflow process started. */ case RRSS_SCRATCH_INVALID_SYNCED_REFLOW: ASSERT3U(offset, >=, logical_size); break; } out: spa_config_exit(spa, SCL_ALL, FTAG); mutex_exit(&ztest_vdev_lock); ztest_scratch_state->zs_raidz_scratch_verify_pause = 0; spa_close(spa, FTAG); kernel_fini(); } static void ztest_scratch_thread(void *arg) { (void) arg; /* wait up to 10 seconds */ for (int t = 100; t > 0; t -= 1) { if (raidz_expand_pause_point == RAIDZ_EXPAND_PAUSE_NONE) thread_exit(); (void) poll(NULL, 0, 100); } /* killed when the scratch area progress reached a certain point */ ztest_kill(ztest_shared); } /* * Verify that we can attach raidz device. */ void ztest_vdev_raidz_attach(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; uint64_t leaves, raidz_children, newsize, ashift = ztest_get_ashift(); kthread_t *scratch_thread = NULL; vdev_t *newvd, *pvd; nvlist_t *root; char *newpath = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); int error, expected_error = 0; mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_ALL, FTAG, RW_READER); /* Only allow attach when raid-kind = 'eraidz' */ if (!ztest_opts.zo_raid_do_expand) { spa_config_exit(spa, SCL_ALL, FTAG); goto out; } if (ztest_opts.zo_mmp_test) { spa_config_exit(spa, SCL_ALL, FTAG); goto out; } if (ztest_device_removal_active) { spa_config_exit(spa, SCL_ALL, FTAG); goto out; } pvd = vdev_lookup_top(spa, 0); ASSERT(pvd->vdev_ops == &vdev_raidz_ops); /* * Get size of a child of the raidz group, * make sure device is a bit bigger */ newvd = pvd->vdev_child[ztest_random(pvd->vdev_children)]; newsize = 10 * vdev_get_min_asize(newvd) / (9 + ztest_random(2)); /* * Get next attached leaf id */ raidz_children = ztest_get_raidz_children(spa); leaves = MAX(zs->zs_mirrors + zs->zs_splits, 1) * raidz_children; zs->zs_vdev_next_leaf = spa_num_top_vdevs(spa) * leaves; if (spa->spa_raidz_expand) expected_error = ZFS_ERR_RAIDZ_EXPAND_IN_PROGRESS; spa_config_exit(spa, SCL_ALL, FTAG); /* * Path to vdev to be attached */ (void) snprintf(newpath, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, ztest_opts.zo_pool, zs->zs_vdev_next_leaf); /* * Build the nvlist describing newpath. */ root = make_vdev_root(newpath, NULL, NULL, newsize, ashift, NULL, 0, 0, 1); /* * 50% of the time, set raidz_expand_pause_point to cause * raidz_reflow_scratch_sync() to pause at a certain point and * then kill the test after 10 seconds so raidz_scratch_verify() * can confirm consistency when the pool is imported. */ if (ztest_random(2) == 0 && expected_error == 0) { raidz_expand_pause_point = ztest_random(RAIDZ_EXPAND_PAUSE_SCRATCH_POST_REFLOW_2) + 1; scratch_thread = thread_create(NULL, 0, ztest_scratch_thread, ztest_shared, 0, NULL, TS_RUN | TS_JOINABLE, defclsyspri); } error = spa_vdev_attach(spa, pvd->vdev_guid, root, B_FALSE, B_FALSE); nvlist_free(root); if (error == EOVERFLOW || error == ENXIO || error == ZFS_ERR_CHECKPOINT_EXISTS || error == ZFS_ERR_DISCARDING_CHECKPOINT) expected_error = error; if (error != 0 && error != expected_error) { fatal(0, "raidz attach (%s %"PRIu64") returned %d, expected %d", newpath, newsize, error, expected_error); } if (raidz_expand_pause_point) { if (error != 0) { /* * Do not verify scratch object in case of error * returned by vdev attaching. */ raidz_expand_pause_point = RAIDZ_EXPAND_PAUSE_NONE; } VERIFY0(thread_join(scratch_thread)); } out: mutex_exit(&ztest_vdev_lock); umem_free(newpath, MAXPATHLEN); } void ztest_device_removal(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; vdev_t *vd; uint64_t guid; int error; mutex_enter(&ztest_vdev_lock); if (ztest_device_removal_active) { mutex_exit(&ztest_vdev_lock); return; } /* * Remove a random top-level vdev and wait for removal to finish. */ spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); vd = vdev_lookup_top(spa, ztest_random_vdev_top(spa, B_FALSE)); guid = vd->vdev_guid; spa_config_exit(spa, SCL_VDEV, FTAG); error = spa_vdev_remove(spa, guid, B_FALSE); if (error == 0) { ztest_device_removal_active = B_TRUE; mutex_exit(&ztest_vdev_lock); /* * spa->spa_vdev_removal is created in a sync task that * is initiated via dsl_sync_task_nowait(). Since the * task may not run before spa_vdev_remove() returns, we * must wait at least 1 txg to ensure that the removal * struct has been created. */ txg_wait_synced(spa_get_dsl(spa), 0); while (spa->spa_removing_phys.sr_state == DSS_SCANNING) txg_wait_synced(spa_get_dsl(spa), 0); } else { mutex_exit(&ztest_vdev_lock); return; } /* * The pool needs to be scrubbed after completing device removal. * Failure to do so may result in checksum errors due to the * strategy employed by ztest_fault_inject() when selecting which * offset are redundant and can be damaged. */ error = spa_scan(spa, POOL_SCAN_SCRUB); if (error == 0) { while (dsl_scan_scrubbing(spa_get_dsl(spa))) txg_wait_synced(spa_get_dsl(spa), 0); } mutex_enter(&ztest_vdev_lock); ztest_device_removal_active = B_FALSE; mutex_exit(&ztest_vdev_lock); } /* * Callback function which expands the physical size of the vdev. */ static vdev_t * grow_vdev(vdev_t *vd, void *arg) { spa_t *spa __maybe_unused = vd->vdev_spa; size_t *newsize = arg; size_t fsize; int fd; ASSERT3S(spa_config_held(spa, SCL_STATE, RW_READER), ==, SCL_STATE); ASSERT(vd->vdev_ops->vdev_op_leaf); if ((fd = open(vd->vdev_path, O_RDWR)) == -1) return (vd); fsize = lseek(fd, 0, SEEK_END); VERIFY0(ftruncate(fd, *newsize)); if (ztest_opts.zo_verbose >= 6) { (void) printf("%s grew from %lu to %lu bytes\n", vd->vdev_path, (ulong_t)fsize, (ulong_t)*newsize); } (void) close(fd); return (NULL); } /* * Callback function which expands a given vdev by calling vdev_online(). */ static vdev_t * online_vdev(vdev_t *vd, void *arg) { (void) arg; spa_t *spa = vd->vdev_spa; vdev_t *tvd = vd->vdev_top; uint64_t guid = vd->vdev_guid; uint64_t generation = spa->spa_config_generation + 1; vdev_state_t newstate = VDEV_STATE_UNKNOWN; int error; ASSERT3S(spa_config_held(spa, SCL_STATE, RW_READER), ==, SCL_STATE); ASSERT(vd->vdev_ops->vdev_op_leaf); /* Calling vdev_online will initialize the new metaslabs */ spa_config_exit(spa, SCL_STATE, spa); error = vdev_online(spa, guid, ZFS_ONLINE_EXPAND, &newstate); spa_config_enter(spa, SCL_STATE, spa, RW_READER); /* * If vdev_online returned an error or the underlying vdev_open * failed then we abort the expand. The only way to know that * vdev_open fails is by checking the returned newstate. */ if (error || newstate != VDEV_STATE_HEALTHY) { if (ztest_opts.zo_verbose >= 5) { (void) printf("Unable to expand vdev, state %u, " "error %d\n", newstate, error); } return (vd); } ASSERT3U(newstate, ==, VDEV_STATE_HEALTHY); /* * Since we dropped the lock we need to ensure that we're * still talking to the original vdev. It's possible this * vdev may have been detached/replaced while we were * trying to online it. */ if (generation != spa->spa_config_generation) { if (ztest_opts.zo_verbose >= 5) { (void) printf("vdev configuration has changed, " "guid %"PRIu64", state %"PRIu64", " "expected gen %"PRIu64", got gen %"PRIu64"\n", guid, tvd->vdev_state, generation, spa->spa_config_generation); } return (vd); } return (NULL); } /* * Traverse the vdev tree calling the supplied function. * We continue to walk the tree until we either have walked all * children or we receive a non-NULL return from the callback. * If a NULL callback is passed, then we just return back the first * leaf vdev we encounter. */ static vdev_t * vdev_walk_tree(vdev_t *vd, vdev_t *(*func)(vdev_t *, void *), void *arg) { uint_t c; if (vd->vdev_ops->vdev_op_leaf) { if (func == NULL) return (vd); else return (func(vd, arg)); } for (c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; if ((cvd = vdev_walk_tree(cvd, func, arg)) != NULL) return (cvd); } return (NULL); } /* * Verify that dynamic LUN growth works as expected. */ void ztest_vdev_LUN_growth(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; vdev_t *vd, *tvd; metaslab_class_t *mc; metaslab_group_t *mg; size_t psize, newsize; uint64_t top; uint64_t old_class_space, new_class_space, old_ms_count, new_ms_count; mutex_enter(&ztest_checkpoint_lock); mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_STATE, spa, RW_READER); /* * If there is a vdev removal in progress, it could complete while * we are running, in which case we would not be able to verify * that the metaslab_class space increased (because it decreases * when the device removal completes). */ if (ztest_device_removal_active) { spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); return; } /* * If we are under raidz expansion, the test can failed because the * metaslabs count will not increase immediately after the vdev is * expanded. It will happen only after raidz expansion completion. */ if (spa->spa_raidz_expand) { spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); return; } top = ztest_random_vdev_top(spa, B_TRUE); tvd = spa->spa_root_vdev->vdev_child[top]; mg = tvd->vdev_mg; mc = mg->mg_class; old_ms_count = tvd->vdev_ms_count; old_class_space = metaslab_class_get_space(mc); /* * Determine the size of the first leaf vdev associated with * our top-level device. */ vd = vdev_walk_tree(tvd, NULL, NULL); ASSERT3P(vd, !=, NULL); ASSERT(vd->vdev_ops->vdev_op_leaf); psize = vd->vdev_psize; /* * We only try to expand the vdev if it's healthy, less than 4x its * original size, and it has a valid psize. */ if (tvd->vdev_state != VDEV_STATE_HEALTHY || psize == 0 || psize >= 4 * ztest_opts.zo_vdev_size) { spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); return; } ASSERT3U(psize, >, 0); newsize = psize + MAX(psize / 8, SPA_MAXBLOCKSIZE); ASSERT3U(newsize, >, psize); if (ztest_opts.zo_verbose >= 6) { (void) printf("Expanding LUN %s from %lu to %lu\n", vd->vdev_path, (ulong_t)psize, (ulong_t)newsize); } /* * Growing the vdev is a two step process: * 1). expand the physical size (i.e. relabel) * 2). online the vdev to create the new metaslabs */ if (vdev_walk_tree(tvd, grow_vdev, &newsize) != NULL || vdev_walk_tree(tvd, online_vdev, NULL) != NULL || tvd->vdev_state != VDEV_STATE_HEALTHY) { if (ztest_opts.zo_verbose >= 5) { (void) printf("Could not expand LUN because " "the vdev configuration changed.\n"); } spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); return; } spa_config_exit(spa, SCL_STATE, spa); /* * Expanding the LUN will update the config asynchronously, * thus we must wait for the async thread to complete any * pending tasks before proceeding. */ for (;;) { boolean_t done; mutex_enter(&spa->spa_async_lock); done = (spa->spa_async_thread == NULL && !spa->spa_async_tasks); mutex_exit(&spa->spa_async_lock); if (done) break; txg_wait_synced(spa_get_dsl(spa), 0); (void) poll(NULL, 0, 100); } spa_config_enter(spa, SCL_STATE, spa, RW_READER); tvd = spa->spa_root_vdev->vdev_child[top]; new_ms_count = tvd->vdev_ms_count; new_class_space = metaslab_class_get_space(mc); if (tvd->vdev_mg != mg || mg->mg_class != mc) { if (ztest_opts.zo_verbose >= 5) { (void) printf("Could not verify LUN expansion due to " "intervening vdev offline or remove.\n"); } spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); return; } /* * Make sure we were able to grow the vdev. */ if (new_ms_count <= old_ms_count) { fatal(B_FALSE, "LUN expansion failed: ms_count %"PRIu64" < %"PRIu64"\n", old_ms_count, new_ms_count); } /* * Make sure we were able to grow the pool. */ if (new_class_space <= old_class_space) { fatal(B_FALSE, "LUN expansion failed: class_space %"PRIu64" < %"PRIu64"\n", old_class_space, new_class_space); } if (ztest_opts.zo_verbose >= 5) { char oldnumbuf[NN_NUMBUF_SZ], newnumbuf[NN_NUMBUF_SZ]; nicenum(old_class_space, oldnumbuf, sizeof (oldnumbuf)); nicenum(new_class_space, newnumbuf, sizeof (newnumbuf)); (void) printf("%s grew from %s to %s\n", spa->spa_name, oldnumbuf, newnumbuf); } spa_config_exit(spa, SCL_STATE, spa); mutex_exit(&ztest_vdev_lock); mutex_exit(&ztest_checkpoint_lock); } /* * Verify that dmu_objset_{create,destroy,open,close} work as expected. */ static void ztest_objset_create_cb(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx) { (void) arg, (void) cr; /* * Create the objects common to all ztest datasets. */ VERIFY0(zap_create_claim(os, ZTEST_DIROBJ, DMU_OT_ZAP_OTHER, DMU_OT_NONE, 0, tx)); } static int ztest_dataset_create(char *dsname) { int err; uint64_t rand; dsl_crypto_params_t *dcp = NULL; /* * 50% of the time, we create encrypted datasets * using a random cipher suite and a hard-coded * wrapping key. */ rand = ztest_random(2); if (rand != 0) { nvlist_t *crypto_args = fnvlist_alloc(); nvlist_t *props = fnvlist_alloc(); /* slight bias towards the default cipher suite */ rand = ztest_random(ZIO_CRYPT_FUNCTIONS); if (rand < ZIO_CRYPT_AES_128_CCM) rand = ZIO_CRYPT_ON; fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_ENCRYPTION), rand); fnvlist_add_uint8_array(crypto_args, "wkeydata", (uint8_t *)ztest_wkeydata, WRAPPING_KEY_LEN); /* * These parameters aren't really used by the kernel. They * are simply stored so that userspace knows how to load * the wrapping key. */ fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_KEYFORMAT), ZFS_KEYFORMAT_RAW); fnvlist_add_string(props, zfs_prop_to_name(ZFS_PROP_KEYLOCATION), "prompt"); fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_PBKDF2_SALT), 0ULL); fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_PBKDF2_ITERS), 0ULL); VERIFY0(dsl_crypto_params_create_nvlist(DCP_CMD_NONE, props, crypto_args, &dcp)); /* * Cycle through all available encryption implementations * to verify interoperability. */ VERIFY0(gcm_impl_set("cycle")); VERIFY0(aes_impl_set("cycle")); fnvlist_free(crypto_args); fnvlist_free(props); } err = dmu_objset_create(dsname, DMU_OST_OTHER, 0, dcp, ztest_objset_create_cb, NULL); dsl_crypto_params_free(dcp, !!err); rand = ztest_random(100); if (err || rand < 80) return (err); if (ztest_opts.zo_verbose >= 5) (void) printf("Setting dataset %s to sync always\n", dsname); return (ztest_dsl_prop_set_uint64(dsname, ZFS_PROP_SYNC, ZFS_SYNC_ALWAYS, B_FALSE)); } static int ztest_objset_destroy_cb(const char *name, void *arg) { (void) arg; objset_t *os; dmu_object_info_t doi; int error; /* * Verify that the dataset contains a directory object. */ VERIFY0(ztest_dmu_objset_own(name, DMU_OST_OTHER, B_TRUE, B_TRUE, FTAG, &os)); error = dmu_object_info(os, ZTEST_DIROBJ, &doi); if (error != ENOENT) { /* We could have crashed in the middle of destroying it */ ASSERT0(error); ASSERT3U(doi.doi_type, ==, DMU_OT_ZAP_OTHER); ASSERT3S(doi.doi_physical_blocks_512, >=, 0); } dmu_objset_disown(os, B_TRUE, FTAG); /* * Destroy the dataset. */ if (strchr(name, '@') != NULL) { error = dsl_destroy_snapshot(name, B_TRUE); if (error != ECHRNG) { /* * The program was executed, but encountered a runtime * error, such as insufficient slop, or a hold on the * dataset. */ ASSERT0(error); } } else { error = dsl_destroy_head(name); if (error == ENOSPC) { /* There could be checkpoint or insufficient slop */ ztest_record_enospc(FTAG); } else if (error != EBUSY) { /* There could be a hold on this dataset */ ASSERT0(error); } } return (0); } static boolean_t ztest_snapshot_create(char *osname, uint64_t id) { char snapname[ZFS_MAX_DATASET_NAME_LEN]; int error; (void) snprintf(snapname, sizeof (snapname), "%"PRIu64"", id); error = dmu_objset_snapshot_one(osname, snapname); if (error == ENOSPC) { ztest_record_enospc(FTAG); return (B_FALSE); } if (error != 0 && error != EEXIST && error != ECHRNG) { fatal(B_FALSE, "ztest_snapshot_create(%s@%s) = %d", osname, snapname, error); } return (B_TRUE); } static boolean_t ztest_snapshot_destroy(char *osname, uint64_t id) { char snapname[ZFS_MAX_DATASET_NAME_LEN]; int error; (void) snprintf(snapname, sizeof (snapname), "%s@%"PRIu64"", osname, id); error = dsl_destroy_snapshot(snapname, B_FALSE); if (error != 0 && error != ENOENT && error != ECHRNG) fatal(B_FALSE, "ztest_snapshot_destroy(%s) = %d", snapname, error); return (B_TRUE); } void ztest_dmu_objset_create_destroy(ztest_ds_t *zd, uint64_t id) { (void) zd; ztest_ds_t *zdtmp; int iters; int error; objset_t *os, *os2; char name[ZFS_MAX_DATASET_NAME_LEN]; zilog_t *zilog; int i; zdtmp = umem_alloc(sizeof (ztest_ds_t), UMEM_NOFAIL); (void) pthread_rwlock_rdlock(&ztest_name_lock); (void) snprintf(name, sizeof (name), "%s/temp_%"PRIu64"", ztest_opts.zo_pool, id); /* * If this dataset exists from a previous run, process its replay log * half of the time. If we don't replay it, then dsl_destroy_head() * (invoked from ztest_objset_destroy_cb()) should just throw it away. */ if (ztest_random(2) == 0 && ztest_dmu_objset_own(name, DMU_OST_OTHER, B_FALSE, B_TRUE, FTAG, &os) == 0) { ztest_zd_init(zdtmp, NULL, os); zil_replay(os, zdtmp, ztest_replay_vector); ztest_zd_fini(zdtmp); dmu_objset_disown(os, B_TRUE, FTAG); } /* * There may be an old instance of the dataset we're about to * create lying around from a previous run. If so, destroy it * and all of its snapshots. */ (void) dmu_objset_find(name, ztest_objset_destroy_cb, NULL, DS_FIND_CHILDREN | DS_FIND_SNAPSHOTS); /* * Verify that the destroyed dataset is no longer in the namespace. * It may still be present if the destroy above fails with ENOSPC. */ error = ztest_dmu_objset_own(name, DMU_OST_OTHER, B_TRUE, B_TRUE, FTAG, &os); if (error == 0) { dmu_objset_disown(os, B_TRUE, FTAG); ztest_record_enospc(FTAG); goto out; } VERIFY3U(ENOENT, ==, error); /* * Verify that we can create a new dataset. */ error = ztest_dataset_create(name); if (error) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_objset_create(%s) = %d", name, error); } VERIFY0(ztest_dmu_objset_own(name, DMU_OST_OTHER, B_FALSE, B_TRUE, FTAG, &os)); ztest_zd_init(zdtmp, NULL, os); /* * Open the intent log for it. */ zilog = zil_open(os, ztest_get_data, NULL); /* * Put some objects in there, do a little I/O to them, * and randomly take a couple of snapshots along the way. */ iters = ztest_random(5); for (i = 0; i < iters; i++) { ztest_dmu_object_alloc_free(zdtmp, id); if (ztest_random(iters) == 0) (void) ztest_snapshot_create(name, i); } /* * Verify that we cannot create an existing dataset. */ VERIFY3U(EEXIST, ==, dmu_objset_create(name, DMU_OST_OTHER, 0, NULL, NULL, NULL)); /* * Verify that we can hold an objset that is also owned. */ VERIFY0(dmu_objset_hold(name, FTAG, &os2)); dmu_objset_rele(os2, FTAG); /* * Verify that we cannot own an objset that is already owned. */ VERIFY3U(EBUSY, ==, ztest_dmu_objset_own(name, DMU_OST_OTHER, B_FALSE, B_TRUE, FTAG, &os2)); zil_close(zilog); dmu_objset_disown(os, B_TRUE, FTAG); ztest_zd_fini(zdtmp); out: (void) pthread_rwlock_unlock(&ztest_name_lock); umem_free(zdtmp, sizeof (ztest_ds_t)); } /* * Verify that dmu_snapshot_{create,destroy,open,close} work as expected. */ void ztest_dmu_snapshot_create_destroy(ztest_ds_t *zd, uint64_t id) { (void) pthread_rwlock_rdlock(&ztest_name_lock); (void) ztest_snapshot_destroy(zd->zd_name, id); (void) ztest_snapshot_create(zd->zd_name, id); (void) pthread_rwlock_unlock(&ztest_name_lock); } /* * Cleanup non-standard snapshots and clones. */ static void ztest_dsl_dataset_cleanup(char *osname, uint64_t id) { char *snap1name; char *clone1name; char *snap2name; char *clone2name; char *snap3name; int error; snap1name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); clone1name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); snap2name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); clone2name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); snap3name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); (void) snprintf(snap1name, ZFS_MAX_DATASET_NAME_LEN, "%s@s1_%"PRIu64"", osname, id); (void) snprintf(clone1name, ZFS_MAX_DATASET_NAME_LEN, "%s/c1_%"PRIu64"", osname, id); (void) snprintf(snap2name, ZFS_MAX_DATASET_NAME_LEN, "%s@s2_%"PRIu64"", clone1name, id); (void) snprintf(clone2name, ZFS_MAX_DATASET_NAME_LEN, "%s/c2_%"PRIu64"", osname, id); (void) snprintf(snap3name, ZFS_MAX_DATASET_NAME_LEN, "%s@s3_%"PRIu64"", clone1name, id); error = dsl_destroy_head(clone2name); if (error && error != ENOENT) fatal(B_FALSE, "dsl_destroy_head(%s) = %d", clone2name, error); error = dsl_destroy_snapshot(snap3name, B_FALSE); if (error && error != ENOENT) fatal(B_FALSE, "dsl_destroy_snapshot(%s) = %d", snap3name, error); error = dsl_destroy_snapshot(snap2name, B_FALSE); if (error && error != ENOENT) fatal(B_FALSE, "dsl_destroy_snapshot(%s) = %d", snap2name, error); error = dsl_destroy_head(clone1name); if (error && error != ENOENT) fatal(B_FALSE, "dsl_destroy_head(%s) = %d", clone1name, error); error = dsl_destroy_snapshot(snap1name, B_FALSE); if (error && error != ENOENT) fatal(B_FALSE, "dsl_destroy_snapshot(%s) = %d", snap1name, error); umem_free(snap1name, ZFS_MAX_DATASET_NAME_LEN); umem_free(clone1name, ZFS_MAX_DATASET_NAME_LEN); umem_free(snap2name, ZFS_MAX_DATASET_NAME_LEN); umem_free(clone2name, ZFS_MAX_DATASET_NAME_LEN); umem_free(snap3name, ZFS_MAX_DATASET_NAME_LEN); } /* * Verify dsl_dataset_promote handles EBUSY */ void ztest_dsl_dataset_promote_busy(ztest_ds_t *zd, uint64_t id) { objset_t *os; char *snap1name; char *clone1name; char *snap2name; char *clone2name; char *snap3name; char *osname = zd->zd_name; int error; snap1name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); clone1name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); snap2name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); clone2name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); snap3name = umem_alloc(ZFS_MAX_DATASET_NAME_LEN, UMEM_NOFAIL); (void) pthread_rwlock_rdlock(&ztest_name_lock); ztest_dsl_dataset_cleanup(osname, id); (void) snprintf(snap1name, ZFS_MAX_DATASET_NAME_LEN, "%s@s1_%"PRIu64"", osname, id); (void) snprintf(clone1name, ZFS_MAX_DATASET_NAME_LEN, "%s/c1_%"PRIu64"", osname, id); (void) snprintf(snap2name, ZFS_MAX_DATASET_NAME_LEN, "%s@s2_%"PRIu64"", clone1name, id); (void) snprintf(clone2name, ZFS_MAX_DATASET_NAME_LEN, "%s/c2_%"PRIu64"", osname, id); (void) snprintf(snap3name, ZFS_MAX_DATASET_NAME_LEN, "%s@s3_%"PRIu64"", clone1name, id); error = dmu_objset_snapshot_one(osname, strchr(snap1name, '@') + 1); if (error && error != EEXIST) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_take_snapshot(%s) = %d", snap1name, error); } error = dmu_objset_clone(clone1name, snap1name); if (error) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_objset_create(%s) = %d", clone1name, error); } error = dmu_objset_snapshot_one(clone1name, strchr(snap2name, '@') + 1); if (error && error != EEXIST) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_open_snapshot(%s) = %d", snap2name, error); } error = dmu_objset_snapshot_one(clone1name, strchr(snap3name, '@') + 1); if (error && error != EEXIST) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_open_snapshot(%s) = %d", snap3name, error); } error = dmu_objset_clone(clone2name, snap3name); if (error) { if (error == ENOSPC) { ztest_record_enospc(FTAG); goto out; } fatal(B_FALSE, "dmu_objset_create(%s) = %d", clone2name, error); } error = ztest_dmu_objset_own(snap2name, DMU_OST_ANY, B_TRUE, B_TRUE, FTAG, &os); if (error) fatal(B_FALSE, "dmu_objset_own(%s) = %d", snap2name, error); error = dsl_dataset_promote(clone2name, NULL); if (error == ENOSPC) { dmu_objset_disown(os, B_TRUE, FTAG); ztest_record_enospc(FTAG); goto out; } if (error != EBUSY) fatal(B_FALSE, "dsl_dataset_promote(%s), %d, not EBUSY", clone2name, error); dmu_objset_disown(os, B_TRUE, FTAG); out: ztest_dsl_dataset_cleanup(osname, id); (void) pthread_rwlock_unlock(&ztest_name_lock); umem_free(snap1name, ZFS_MAX_DATASET_NAME_LEN); umem_free(clone1name, ZFS_MAX_DATASET_NAME_LEN); umem_free(snap2name, ZFS_MAX_DATASET_NAME_LEN); umem_free(clone2name, ZFS_MAX_DATASET_NAME_LEN); umem_free(snap3name, ZFS_MAX_DATASET_NAME_LEN); } #undef OD_ARRAY_SIZE #define OD_ARRAY_SIZE 4 /* * Verify that dmu_object_{alloc,free} work as expected. */ void ztest_dmu_object_alloc_free(ztest_ds_t *zd, uint64_t id) { ztest_od_t *od; int batchsize; int size; int b; size = sizeof (ztest_od_t) * OD_ARRAY_SIZE; od = umem_alloc(size, UMEM_NOFAIL); batchsize = OD_ARRAY_SIZE; for (b = 0; b < batchsize; b++) ztest_od_init(od + b, id, FTAG, b, DMU_OT_UINT64_OTHER, 0, 0, 0); /* * Destroy the previous batch of objects, create a new batch, * and do some I/O on the new objects. */ if (ztest_object_init(zd, od, size, B_TRUE) != 0) { zd->zd_od = NULL; umem_free(od, size); return; } while (ztest_random(4 * batchsize) != 0) ztest_io(zd, od[ztest_random(batchsize)].od_object, ztest_random(ZTEST_RANGE_LOCKS) << SPA_MAXBLOCKSHIFT); umem_free(od, size); } /* * Rewind the global allocator to verify object allocation backfilling. */ void ztest_dmu_object_next_chunk(ztest_ds_t *zd, uint64_t id) { (void) id; objset_t *os = zd->zd_os; uint_t dnodes_per_chunk = 1 << dmu_object_alloc_chunk_shift; uint64_t object; /* * Rewind the global allocator randomly back to a lower object number * to force backfilling and reclamation of recently freed dnodes. */ mutex_enter(&os->os_obj_lock); object = ztest_random(os->os_obj_next_chunk); os->os_obj_next_chunk = P2ALIGN_TYPED(object, dnodes_per_chunk, uint64_t); mutex_exit(&os->os_obj_lock); } #undef OD_ARRAY_SIZE #define OD_ARRAY_SIZE 2 /* * Verify that dmu_{read,write} work as expected. */ void ztest_dmu_read_write(ztest_ds_t *zd, uint64_t id) { int size; ztest_od_t *od; objset_t *os = zd->zd_os; size = sizeof (ztest_od_t) * OD_ARRAY_SIZE; od = umem_alloc(size, UMEM_NOFAIL); dmu_tx_t *tx; int freeit, error; uint64_t i, n, s, txg; bufwad_t *packbuf, *bigbuf, *pack, *bigH, *bigT; uint64_t packobj, packoff, packsize, bigobj, bigoff, bigsize; uint64_t chunksize = (1000 + ztest_random(1000)) * sizeof (uint64_t); uint64_t regions = 997; uint64_t stride = 123456789ULL; uint64_t width = 40; int free_percent = 5; /* * This test uses two objects, packobj and bigobj, that are always * updated together (i.e. in the same tx) so that their contents are * in sync and can be compared. Their contents relate to each other * in a simple way: packobj is a dense array of 'bufwad' structures, * while bigobj is a sparse array of the same bufwads. Specifically, * for any index n, there are three bufwads that should be identical: * * packobj, at offset n * sizeof (bufwad_t) * bigobj, at the head of the nth chunk * bigobj, at the tail of the nth chunk * * The chunk size is arbitrary. It doesn't have to be a power of two, * and it doesn't have any relation to the object blocksize. * The only requirement is that it can hold at least two bufwads. * * Normally, we write the bufwad to each of these locations. * However, free_percent of the time we instead write zeroes to * packobj and perform a dmu_free_range() on bigobj. By comparing * bigobj to packobj, we can verify that the DMU is correctly * tracking which parts of an object are allocated and free, * and that the contents of the allocated blocks are correct. */ /* * Read the directory info. If it's the first time, set things up. */ ztest_od_init(od, id, FTAG, 0, DMU_OT_UINT64_OTHER, 0, 0, chunksize); ztest_od_init(od + 1, id, FTAG, 1, DMU_OT_UINT64_OTHER, 0, 0, chunksize); if (ztest_object_init(zd, od, size, B_FALSE) != 0) { umem_free(od, size); return; } bigobj = od[0].od_object; packobj = od[1].od_object; chunksize = od[0].od_gen; ASSERT3U(chunksize, ==, od[1].od_gen); /* * Prefetch a random chunk of the big object. * Our aim here is to get some async reads in flight * for blocks that we may free below; the DMU should * handle this race correctly. */ n = ztest_random(regions) * stride + ztest_random(width); s = 1 + ztest_random(2 * width - 1); dmu_prefetch(os, bigobj, 0, n * chunksize, s * chunksize, ZIO_PRIORITY_SYNC_READ); /* * Pick a random index and compute the offsets into packobj and bigobj. */ n = ztest_random(regions) * stride + ztest_random(width); s = 1 + ztest_random(width - 1); packoff = n * sizeof (bufwad_t); packsize = s * sizeof (bufwad_t); bigoff = n * chunksize; bigsize = s * chunksize; packbuf = umem_alloc(packsize, UMEM_NOFAIL); bigbuf = umem_alloc(bigsize, UMEM_NOFAIL); /* * free_percent of the time, free a range of bigobj rather than * overwriting it. */ freeit = (ztest_random(100) < free_percent); /* * Read the current contents of our objects. */ error = dmu_read(os, packobj, packoff, packsize, packbuf, DMU_READ_PREFETCH); ASSERT0(error); error = dmu_read(os, bigobj, bigoff, bigsize, bigbuf, DMU_READ_PREFETCH); ASSERT0(error); /* * Get a tx for the mods to both packobj and bigobj. */ tx = dmu_tx_create(os); dmu_tx_hold_write(tx, packobj, packoff, packsize); if (freeit) dmu_tx_hold_free(tx, bigobj, bigoff, bigsize); else dmu_tx_hold_write(tx, bigobj, bigoff, bigsize); /* This accounts for setting the checksum/compression. */ dmu_tx_hold_bonus(tx, bigobj); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) { umem_free(packbuf, packsize); umem_free(bigbuf, bigsize); umem_free(od, size); return; } enum zio_checksum cksum; do { cksum = (enum zio_checksum) ztest_random_dsl_prop(ZFS_PROP_CHECKSUM); } while (cksum >= ZIO_CHECKSUM_LEGACY_FUNCTIONS); dmu_object_set_checksum(os, bigobj, cksum, tx); enum zio_compress comp; do { comp = (enum zio_compress) ztest_random_dsl_prop(ZFS_PROP_COMPRESSION); } while (comp >= ZIO_COMPRESS_LEGACY_FUNCTIONS); dmu_object_set_compress(os, bigobj, comp, tx); /* * For each index from n to n + s, verify that the existing bufwad * in packobj matches the bufwads at the head and tail of the * corresponding chunk in bigobj. Then update all three bufwads * with the new values we want to write out. */ for (i = 0; i < s; i++) { /* LINTED */ pack = (bufwad_t *)((char *)packbuf + i * sizeof (bufwad_t)); /* LINTED */ bigH = (bufwad_t *)((char *)bigbuf + i * chunksize); /* LINTED */ bigT = (bufwad_t *)((char *)bigH + chunksize) - 1; ASSERT3U((uintptr_t)bigH - (uintptr_t)bigbuf, <, bigsize); ASSERT3U((uintptr_t)bigT - (uintptr_t)bigbuf, <, bigsize); if (pack->bw_txg > txg) fatal(B_FALSE, "future leak: got %"PRIx64", open txg is %"PRIx64"", pack->bw_txg, txg); if (pack->bw_data != 0 && pack->bw_index != n + i) fatal(B_FALSE, "wrong index: " "got %"PRIx64", wanted %"PRIx64"+%"PRIx64"", pack->bw_index, n, i); if (memcmp(pack, bigH, sizeof (bufwad_t)) != 0) fatal(B_FALSE, "pack/bigH mismatch in %p/%p", pack, bigH); if (memcmp(pack, bigT, sizeof (bufwad_t)) != 0) fatal(B_FALSE, "pack/bigT mismatch in %p/%p", pack, bigT); if (freeit) { memset(pack, 0, sizeof (bufwad_t)); } else { pack->bw_index = n + i; pack->bw_txg = txg; pack->bw_data = 1 + ztest_random(-2ULL); } *bigH = *pack; *bigT = *pack; } /* * We've verified all the old bufwads, and made new ones. * Now write them out. */ dmu_write(os, packobj, packoff, packsize, packbuf, tx); if (freeit) { if (ztest_opts.zo_verbose >= 7) { (void) printf("freeing offset %"PRIx64" size %"PRIx64"" " txg %"PRIx64"\n", bigoff, bigsize, txg); } VERIFY0(dmu_free_range(os, bigobj, bigoff, bigsize, tx)); } else { if (ztest_opts.zo_verbose >= 7) { (void) printf("writing offset %"PRIx64" size %"PRIx64"" " txg %"PRIx64"\n", bigoff, bigsize, txg); } dmu_write(os, bigobj, bigoff, bigsize, bigbuf, tx); } dmu_tx_commit(tx); /* * Sanity check the stuff we just wrote. */ { void *packcheck = umem_alloc(packsize, UMEM_NOFAIL); void *bigcheck = umem_alloc(bigsize, UMEM_NOFAIL); VERIFY0(dmu_read(os, packobj, packoff, packsize, packcheck, DMU_READ_PREFETCH)); VERIFY0(dmu_read(os, bigobj, bigoff, bigsize, bigcheck, DMU_READ_PREFETCH)); ASSERT0(memcmp(packbuf, packcheck, packsize)); ASSERT0(memcmp(bigbuf, bigcheck, bigsize)); umem_free(packcheck, packsize); umem_free(bigcheck, bigsize); } umem_free(packbuf, packsize); umem_free(bigbuf, bigsize); umem_free(od, size); } static void compare_and_update_pbbufs(uint64_t s, bufwad_t *packbuf, bufwad_t *bigbuf, uint64_t bigsize, uint64_t n, uint64_t chunksize, uint64_t txg) { uint64_t i; bufwad_t *pack; bufwad_t *bigH; bufwad_t *bigT; /* * For each index from n to n + s, verify that the existing bufwad * in packobj matches the bufwads at the head and tail of the * corresponding chunk in bigobj. Then update all three bufwads * with the new values we want to write out. */ for (i = 0; i < s; i++) { /* LINTED */ pack = (bufwad_t *)((char *)packbuf + i * sizeof (bufwad_t)); /* LINTED */ bigH = (bufwad_t *)((char *)bigbuf + i * chunksize); /* LINTED */ bigT = (bufwad_t *)((char *)bigH + chunksize) - 1; ASSERT3U((uintptr_t)bigH - (uintptr_t)bigbuf, <, bigsize); ASSERT3U((uintptr_t)bigT - (uintptr_t)bigbuf, <, bigsize); if (pack->bw_txg > txg) fatal(B_FALSE, "future leak: got %"PRIx64", open txg is %"PRIx64"", pack->bw_txg, txg); if (pack->bw_data != 0 && pack->bw_index != n + i) fatal(B_FALSE, "wrong index: " "got %"PRIx64", wanted %"PRIx64"+%"PRIx64"", pack->bw_index, n, i); if (memcmp(pack, bigH, sizeof (bufwad_t)) != 0) fatal(B_FALSE, "pack/bigH mismatch in %p/%p", pack, bigH); if (memcmp(pack, bigT, sizeof (bufwad_t)) != 0) fatal(B_FALSE, "pack/bigT mismatch in %p/%p", pack, bigT); pack->bw_index = n + i; pack->bw_txg = txg; pack->bw_data = 1 + ztest_random(-2ULL); *bigH = *pack; *bigT = *pack; } } #undef OD_ARRAY_SIZE #define OD_ARRAY_SIZE 2 void ztest_dmu_read_write_zcopy(ztest_ds_t *zd, uint64_t id) { objset_t *os = zd->zd_os; ztest_od_t *od; dmu_tx_t *tx; uint64_t i; int error; int size; uint64_t n, s, txg; bufwad_t *packbuf, *bigbuf; uint64_t packobj, packoff, packsize, bigobj, bigoff, bigsize; uint64_t blocksize = ztest_random_blocksize(); uint64_t chunksize = blocksize; uint64_t regions = 997; uint64_t stride = 123456789ULL; uint64_t width = 9; dmu_buf_t *bonus_db; arc_buf_t **bigbuf_arcbufs; dmu_object_info_t doi; size = sizeof (ztest_od_t) * OD_ARRAY_SIZE; od = umem_alloc(size, UMEM_NOFAIL); /* * This test uses two objects, packobj and bigobj, that are always * updated together (i.e. in the same tx) so that their contents are * in sync and can be compared. Their contents relate to each other * in a simple way: packobj is a dense array of 'bufwad' structures, * while bigobj is a sparse array of the same bufwads. Specifically, * for any index n, there are three bufwads that should be identical: * * packobj, at offset n * sizeof (bufwad_t) * bigobj, at the head of the nth chunk * bigobj, at the tail of the nth chunk * * The chunk size is set equal to bigobj block size so that * dmu_assign_arcbuf_by_dbuf() can be tested for object updates. */ /* * Read the directory info. If it's the first time, set things up. */ ztest_od_init(od, id, FTAG, 0, DMU_OT_UINT64_OTHER, blocksize, 0, 0); ztest_od_init(od + 1, id, FTAG, 1, DMU_OT_UINT64_OTHER, 0, 0, chunksize); if (ztest_object_init(zd, od, size, B_FALSE) != 0) { umem_free(od, size); return; } bigobj = od[0].od_object; packobj = od[1].od_object; blocksize = od[0].od_blocksize; chunksize = blocksize; ASSERT3U(chunksize, ==, od[1].od_gen); VERIFY0(dmu_object_info(os, bigobj, &doi)); VERIFY(ISP2(doi.doi_data_block_size)); VERIFY3U(chunksize, ==, doi.doi_data_block_size); VERIFY3U(chunksize, >=, 2 * sizeof (bufwad_t)); /* * Pick a random index and compute the offsets into packobj and bigobj. */ n = ztest_random(regions) * stride + ztest_random(width); s = 1 + ztest_random(width - 1); packoff = n * sizeof (bufwad_t); packsize = s * sizeof (bufwad_t); bigoff = n * chunksize; bigsize = s * chunksize; packbuf = umem_zalloc(packsize, UMEM_NOFAIL); bigbuf = umem_zalloc(bigsize, UMEM_NOFAIL); VERIFY0(dmu_bonus_hold(os, bigobj, FTAG, &bonus_db)); bigbuf_arcbufs = umem_zalloc(2 * s * sizeof (arc_buf_t *), UMEM_NOFAIL); /* * Iteration 0 test zcopy for DB_UNCACHED dbufs. * Iteration 1 test zcopy to already referenced dbufs. * Iteration 2 test zcopy to dirty dbuf in the same txg. * Iteration 3 test zcopy to dbuf dirty in previous txg. * Iteration 4 test zcopy when dbuf is no longer dirty. * Iteration 5 test zcopy when it can't be done. * Iteration 6 one more zcopy write. */ for (i = 0; i < 7; i++) { uint64_t j; uint64_t off; /* * In iteration 5 (i == 5) use arcbufs * that don't match bigobj blksz to test * dmu_assign_arcbuf_by_dbuf() when it can't directly * assign an arcbuf to a dbuf. */ for (j = 0; j < s; j++) { if (i != 5 || chunksize < (SPA_MINBLOCKSIZE * 2)) { bigbuf_arcbufs[j] = dmu_request_arcbuf(bonus_db, chunksize); } else { bigbuf_arcbufs[2 * j] = dmu_request_arcbuf(bonus_db, chunksize / 2); bigbuf_arcbufs[2 * j + 1] = dmu_request_arcbuf(bonus_db, chunksize / 2); } } /* * Get a tx for the mods to both packobj and bigobj. */ tx = dmu_tx_create(os); dmu_tx_hold_write(tx, packobj, packoff, packsize); dmu_tx_hold_write(tx, bigobj, bigoff, bigsize); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) { umem_free(packbuf, packsize); umem_free(bigbuf, bigsize); for (j = 0; j < s; j++) { if (i != 5 || chunksize < (SPA_MINBLOCKSIZE * 2)) { dmu_return_arcbuf(bigbuf_arcbufs[j]); } else { dmu_return_arcbuf( bigbuf_arcbufs[2 * j]); dmu_return_arcbuf( bigbuf_arcbufs[2 * j + 1]); } } umem_free(bigbuf_arcbufs, 2 * s * sizeof (arc_buf_t *)); umem_free(od, size); dmu_buf_rele(bonus_db, FTAG); return; } /* * 50% of the time don't read objects in the 1st iteration to * test dmu_assign_arcbuf_by_dbuf() for the case when there are * no existing dbufs for the specified offsets. */ if (i != 0 || ztest_random(2) != 0) { error = dmu_read(os, packobj, packoff, packsize, packbuf, DMU_READ_PREFETCH); ASSERT0(error); error = dmu_read(os, bigobj, bigoff, bigsize, bigbuf, DMU_READ_PREFETCH); ASSERT0(error); } compare_and_update_pbbufs(s, packbuf, bigbuf, bigsize, n, chunksize, txg); /* * We've verified all the old bufwads, and made new ones. * Now write them out. */ dmu_write(os, packobj, packoff, packsize, packbuf, tx); if (ztest_opts.zo_verbose >= 7) { (void) printf("writing offset %"PRIx64" size %"PRIx64"" " txg %"PRIx64"\n", bigoff, bigsize, txg); } for (off = bigoff, j = 0; j < s; j++, off += chunksize) { dmu_buf_t *dbt; if (i != 5 || chunksize < (SPA_MINBLOCKSIZE * 2)) { memcpy(bigbuf_arcbufs[j]->b_data, (caddr_t)bigbuf + (off - bigoff), chunksize); } else { memcpy(bigbuf_arcbufs[2 * j]->b_data, (caddr_t)bigbuf + (off - bigoff), chunksize / 2); memcpy(bigbuf_arcbufs[2 * j + 1]->b_data, (caddr_t)bigbuf + (off - bigoff) + chunksize / 2, chunksize / 2); } if (i == 1) { VERIFY(dmu_buf_hold(os, bigobj, off, FTAG, &dbt, DMU_READ_NO_PREFETCH) == 0); } if (i != 5 || chunksize < (SPA_MINBLOCKSIZE * 2)) { VERIFY0(dmu_assign_arcbuf_by_dbuf(bonus_db, off, bigbuf_arcbufs[j], tx)); } else { VERIFY0(dmu_assign_arcbuf_by_dbuf(bonus_db, off, bigbuf_arcbufs[2 * j], tx)); VERIFY0(dmu_assign_arcbuf_by_dbuf(bonus_db, off + chunksize / 2, bigbuf_arcbufs[2 * j + 1], tx)); } if (i == 1) { dmu_buf_rele(dbt, FTAG); } } dmu_tx_commit(tx); /* * Sanity check the stuff we just wrote. */ { void *packcheck = umem_alloc(packsize, UMEM_NOFAIL); void *bigcheck = umem_alloc(bigsize, UMEM_NOFAIL); VERIFY0(dmu_read(os, packobj, packoff, packsize, packcheck, DMU_READ_PREFETCH)); VERIFY0(dmu_read(os, bigobj, bigoff, bigsize, bigcheck, DMU_READ_PREFETCH)); ASSERT0(memcmp(packbuf, packcheck, packsize)); ASSERT0(memcmp(bigbuf, bigcheck, bigsize)); umem_free(packcheck, packsize); umem_free(bigcheck, bigsize); } if (i == 2) { txg_wait_open(dmu_objset_pool(os), 0, B_TRUE); } else if (i == 3) { txg_wait_synced(dmu_objset_pool(os), 0); } } dmu_buf_rele(bonus_db, FTAG); umem_free(packbuf, packsize); umem_free(bigbuf, bigsize); umem_free(bigbuf_arcbufs, 2 * s * sizeof (arc_buf_t *)); umem_free(od, size); } void ztest_dmu_write_parallel(ztest_ds_t *zd, uint64_t id) { (void) id; ztest_od_t *od; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); uint64_t offset = (1ULL << (ztest_random(20) + 43)) + (ztest_random(ZTEST_RANGE_LOCKS) << SPA_MAXBLOCKSHIFT); /* * Have multiple threads write to large offsets in an object * to verify that parallel writes to an object -- even to the * same blocks within the object -- doesn't cause any trouble. */ ztest_od_init(od, ID_PARALLEL, FTAG, 0, DMU_OT_UINT64_OTHER, 0, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), B_FALSE) != 0) return; while (ztest_random(10) != 0) ztest_io(zd, od->od_object, offset); umem_free(od, sizeof (ztest_od_t)); } void ztest_dmu_prealloc(ztest_ds_t *zd, uint64_t id) { ztest_od_t *od; uint64_t offset = (1ULL << (ztest_random(4) + SPA_MAXBLOCKSHIFT)) + (ztest_random(ZTEST_RANGE_LOCKS) << SPA_MAXBLOCKSHIFT); uint64_t count = ztest_random(20) + 1; uint64_t blocksize = ztest_random_blocksize(); void *data; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); ztest_od_init(od, id, FTAG, 0, DMU_OT_UINT64_OTHER, blocksize, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), !ztest_random(2)) != 0) { umem_free(od, sizeof (ztest_od_t)); return; } if (ztest_truncate(zd, od->od_object, offset, count * blocksize) != 0) { umem_free(od, sizeof (ztest_od_t)); return; } ztest_prealloc(zd, od->od_object, offset, count * blocksize); data = umem_zalloc(blocksize, UMEM_NOFAIL); while (ztest_random(count) != 0) { uint64_t randoff = offset + (ztest_random(count) * blocksize); if (ztest_write(zd, od->od_object, randoff, blocksize, data) != 0) break; while (ztest_random(4) != 0) ztest_io(zd, od->od_object, randoff); } umem_free(data, blocksize); umem_free(od, sizeof (ztest_od_t)); } /* * Verify that zap_{create,destroy,add,remove,update} work as expected. */ #define ZTEST_ZAP_MIN_INTS 1 #define ZTEST_ZAP_MAX_INTS 4 #define ZTEST_ZAP_MAX_PROPS 1000 void ztest_zap(ztest_ds_t *zd, uint64_t id) { objset_t *os = zd->zd_os; ztest_od_t *od; uint64_t object; uint64_t txg, last_txg; uint64_t value[ZTEST_ZAP_MAX_INTS]; uint64_t zl_ints, zl_intsize, prop; int i, ints; dmu_tx_t *tx; char propname[100], txgname[100]; int error; const char *const hc[2] = { "s.acl.h", ".s.open.h.hyLZlg" }; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); ztest_od_init(od, id, FTAG, 0, DMU_OT_ZAP_OTHER, 0, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), !ztest_random(2)) != 0) goto out; object = od->od_object; /* * Generate a known hash collision, and verify that * we can lookup and remove both entries. */ tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, object, B_TRUE, NULL); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) goto out; for (i = 0; i < 2; i++) { value[i] = i; VERIFY0(zap_add(os, object, hc[i], sizeof (uint64_t), 1, &value[i], tx)); } for (i = 0; i < 2; i++) { VERIFY3U(EEXIST, ==, zap_add(os, object, hc[i], sizeof (uint64_t), 1, &value[i], tx)); VERIFY0( zap_length(os, object, hc[i], &zl_intsize, &zl_ints)); ASSERT3U(zl_intsize, ==, sizeof (uint64_t)); ASSERT3U(zl_ints, ==, 1); } for (i = 0; i < 2; i++) { VERIFY0(zap_remove(os, object, hc[i], tx)); } dmu_tx_commit(tx); /* * Generate a bunch of random entries. */ ints = MAX(ZTEST_ZAP_MIN_INTS, object % ZTEST_ZAP_MAX_INTS); prop = ztest_random(ZTEST_ZAP_MAX_PROPS); (void) sprintf(propname, "prop_%"PRIu64"", prop); (void) sprintf(txgname, "txg_%"PRIu64"", prop); memset(value, 0, sizeof (value)); last_txg = 0; /* * If these zap entries already exist, validate their contents. */ error = zap_length(os, object, txgname, &zl_intsize, &zl_ints); if (error == 0) { ASSERT3U(zl_intsize, ==, sizeof (uint64_t)); ASSERT3U(zl_ints, ==, 1); VERIFY0(zap_lookup(os, object, txgname, zl_intsize, zl_ints, &last_txg)); VERIFY0(zap_length(os, object, propname, &zl_intsize, &zl_ints)); ASSERT3U(zl_intsize, ==, sizeof (uint64_t)); ASSERT3U(zl_ints, ==, ints); VERIFY0(zap_lookup(os, object, propname, zl_intsize, zl_ints, value)); for (i = 0; i < ints; i++) { ASSERT3U(value[i], ==, last_txg + object + i); } } else { ASSERT3U(error, ==, ENOENT); } /* * Atomically update two entries in our zap object. * The first is named txg_%llu, and contains the txg * in which the property was last updated. The second * is named prop_%llu, and the nth element of its value * should be txg + object + n. */ tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, object, B_TRUE, NULL); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) goto out; if (last_txg > txg) fatal(B_FALSE, "zap future leak: old %"PRIu64" new %"PRIu64"", last_txg, txg); for (i = 0; i < ints; i++) value[i] = txg + object + i; VERIFY0(zap_update(os, object, txgname, sizeof (uint64_t), 1, &txg, tx)); VERIFY0(zap_update(os, object, propname, sizeof (uint64_t), ints, value, tx)); dmu_tx_commit(tx); /* * Remove a random pair of entries. */ prop = ztest_random(ZTEST_ZAP_MAX_PROPS); (void) sprintf(propname, "prop_%"PRIu64"", prop); (void) sprintf(txgname, "txg_%"PRIu64"", prop); error = zap_length(os, object, txgname, &zl_intsize, &zl_ints); if (error == ENOENT) goto out; ASSERT0(error); tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, object, B_TRUE, NULL); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) goto out; VERIFY0(zap_remove(os, object, txgname, tx)); VERIFY0(zap_remove(os, object, propname, tx)); dmu_tx_commit(tx); out: umem_free(od, sizeof (ztest_od_t)); } /* * Test case to test the upgrading of a microzap to fatzap. */ void ztest_fzap(ztest_ds_t *zd, uint64_t id) { objset_t *os = zd->zd_os; ztest_od_t *od; uint64_t object, txg, value; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); ztest_od_init(od, id, FTAG, 0, DMU_OT_ZAP_OTHER, 0, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), !ztest_random(2)) != 0) goto out; object = od->od_object; /* * Add entries to this ZAP and make sure it spills over * and gets upgraded to a fatzap. Also, since we are adding * 2050 entries we should see ptrtbl growth and leaf-block split. */ for (value = 0; value < 2050; value++) { char name[ZFS_MAX_DATASET_NAME_LEN]; dmu_tx_t *tx; int error; (void) snprintf(name, sizeof (name), "fzap-%"PRIu64"-%"PRIu64"", id, value); tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, object, B_TRUE, name); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) goto out; error = zap_add(os, object, name, sizeof (uint64_t), 1, &value, tx); ASSERT(error == 0 || error == EEXIST); dmu_tx_commit(tx); } out: umem_free(od, sizeof (ztest_od_t)); } void ztest_zap_parallel(ztest_ds_t *zd, uint64_t id) { (void) id; objset_t *os = zd->zd_os; ztest_od_t *od; uint64_t txg, object, count, wsize, wc, zl_wsize, zl_wc; dmu_tx_t *tx; int i, namelen, error; int micro = ztest_random(2); char name[20], string_value[20]; void *data; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); ztest_od_init(od, ID_PARALLEL, FTAG, micro, DMU_OT_ZAP_OTHER, 0, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), B_FALSE) != 0) { umem_free(od, sizeof (ztest_od_t)); return; } object = od->od_object; /* * Generate a random name of the form 'xxx.....' where each * x is a random printable character and the dots are dots. * There are 94 such characters, and the name length goes from * 6 to 20, so there are 94^3 * 15 = 12,458,760 possible names. */ namelen = ztest_random(sizeof (name) - 5) + 5 + 1; for (i = 0; i < 3; i++) name[i] = '!' + ztest_random('~' - '!' + 1); for (; i < namelen - 1; i++) name[i] = '.'; name[i] = '\0'; if ((namelen & 1) || micro) { wsize = sizeof (txg); wc = 1; data = &txg; } else { wsize = 1; wc = namelen; data = string_value; } count = -1ULL; VERIFY0(zap_count(os, object, &count)); ASSERT3S(count, !=, -1ULL); /* * Select an operation: length, lookup, add, update, remove. */ i = ztest_random(5); if (i >= 2) { tx = dmu_tx_create(os); dmu_tx_hold_zap(tx, object, B_TRUE, NULL); txg = ztest_tx_assign(tx, TXG_MIGHTWAIT, FTAG); if (txg == 0) { umem_free(od, sizeof (ztest_od_t)); return; } memcpy(string_value, name, namelen); } else { tx = NULL; txg = 0; memset(string_value, 0, namelen); } switch (i) { case 0: error = zap_length(os, object, name, &zl_wsize, &zl_wc); if (error == 0) { ASSERT3U(wsize, ==, zl_wsize); ASSERT3U(wc, ==, zl_wc); } else { ASSERT3U(error, ==, ENOENT); } break; case 1: error = zap_lookup(os, object, name, wsize, wc, data); if (error == 0) { if (data == string_value && memcmp(name, data, namelen) != 0) fatal(B_FALSE, "name '%s' != val '%s' len %d", name, (char *)data, namelen); } else { ASSERT3U(error, ==, ENOENT); } break; case 2: error = zap_add(os, object, name, wsize, wc, data, tx); ASSERT(error == 0 || error == EEXIST); break; case 3: VERIFY0(zap_update(os, object, name, wsize, wc, data, tx)); break; case 4: error = zap_remove(os, object, name, tx); ASSERT(error == 0 || error == ENOENT); break; } if (tx != NULL) dmu_tx_commit(tx); umem_free(od, sizeof (ztest_od_t)); } /* * Commit callback data. */ typedef struct ztest_cb_data { list_node_t zcd_node; uint64_t zcd_txg; int zcd_expected_err; boolean_t zcd_added; boolean_t zcd_called; spa_t *zcd_spa; } ztest_cb_data_t; /* This is the actual commit callback function */ static void ztest_commit_callback(void *arg, int error) { ztest_cb_data_t *data = arg; uint64_t synced_txg; VERIFY3P(data, !=, NULL); VERIFY3S(data->zcd_expected_err, ==, error); VERIFY(!data->zcd_called); synced_txg = spa_last_synced_txg(data->zcd_spa); if (data->zcd_txg > synced_txg) fatal(B_FALSE, "commit callback of txg %"PRIu64" called prematurely, " "last synced txg = %"PRIu64"\n", data->zcd_txg, synced_txg); data->zcd_called = B_TRUE; if (error == ECANCELED) { ASSERT0(data->zcd_txg); ASSERT(!data->zcd_added); /* * The private callback data should be destroyed here, but * since we are going to check the zcd_called field after * dmu_tx_abort(), we will destroy it there. */ return; } ASSERT(data->zcd_added); ASSERT3U(data->zcd_txg, !=, 0); (void) mutex_enter(&zcl.zcl_callbacks_lock); /* See if this cb was called more quickly */ if ((synced_txg - data->zcd_txg) < zc_min_txg_delay) zc_min_txg_delay = synced_txg - data->zcd_txg; /* Remove our callback from the list */ list_remove(&zcl.zcl_callbacks, data); (void) mutex_exit(&zcl.zcl_callbacks_lock); umem_free(data, sizeof (ztest_cb_data_t)); } /* Allocate and initialize callback data structure */ static ztest_cb_data_t * ztest_create_cb_data(objset_t *os, uint64_t txg) { ztest_cb_data_t *cb_data; cb_data = umem_zalloc(sizeof (ztest_cb_data_t), UMEM_NOFAIL); cb_data->zcd_txg = txg; cb_data->zcd_spa = dmu_objset_spa(os); list_link_init(&cb_data->zcd_node); return (cb_data); } /* * Commit callback test. */ void ztest_dmu_commit_callbacks(ztest_ds_t *zd, uint64_t id) { objset_t *os = zd->zd_os; ztest_od_t *od; dmu_tx_t *tx; ztest_cb_data_t *cb_data[3], *tmp_cb; uint64_t old_txg, txg; int i, error = 0; od = umem_alloc(sizeof (ztest_od_t), UMEM_NOFAIL); ztest_od_init(od, id, FTAG, 0, DMU_OT_UINT64_OTHER, 0, 0, 0); if (ztest_object_init(zd, od, sizeof (ztest_od_t), B_FALSE) != 0) { umem_free(od, sizeof (ztest_od_t)); return; } tx = dmu_tx_create(os); cb_data[0] = ztest_create_cb_data(os, 0); dmu_tx_callback_register(tx, ztest_commit_callback, cb_data[0]); dmu_tx_hold_write(tx, od->od_object, 0, sizeof (uint64_t)); /* Every once in a while, abort the transaction on purpose */ if (ztest_random(100) == 0) error = -1; if (!error) error = dmu_tx_assign(tx, TXG_NOWAIT); txg = error ? 0 : dmu_tx_get_txg(tx); cb_data[0]->zcd_txg = txg; cb_data[1] = ztest_create_cb_data(os, txg); dmu_tx_callback_register(tx, ztest_commit_callback, cb_data[1]); if (error) { /* * It's not a strict requirement to call the registered * callbacks from inside dmu_tx_abort(), but that's what * it's supposed to happen in the current implementation * so we will check for that. */ for (i = 0; i < 2; i++) { cb_data[i]->zcd_expected_err = ECANCELED; VERIFY(!cb_data[i]->zcd_called); } dmu_tx_abort(tx); for (i = 0; i < 2; i++) { VERIFY(cb_data[i]->zcd_called); umem_free(cb_data[i], sizeof (ztest_cb_data_t)); } umem_free(od, sizeof (ztest_od_t)); return; } cb_data[2] = ztest_create_cb_data(os, txg); dmu_tx_callback_register(tx, ztest_commit_callback, cb_data[2]); /* * Read existing data to make sure there isn't a future leak. */ VERIFY0(dmu_read(os, od->od_object, 0, sizeof (uint64_t), &old_txg, DMU_READ_PREFETCH)); if (old_txg > txg) fatal(B_FALSE, "future leak: got %"PRIu64", open txg is %"PRIu64"", old_txg, txg); dmu_write(os, od->od_object, 0, sizeof (uint64_t), &txg, tx); (void) mutex_enter(&zcl.zcl_callbacks_lock); /* * Since commit callbacks don't have any ordering requirement and since * it is theoretically possible for a commit callback to be called * after an arbitrary amount of time has elapsed since its txg has been * synced, it is difficult to reliably determine whether a commit * callback hasn't been called due to high load or due to a flawed * implementation. * * In practice, we will assume that if after a certain number of txgs a * commit callback hasn't been called, then most likely there's an * implementation bug.. */ tmp_cb = list_head(&zcl.zcl_callbacks); if (tmp_cb != NULL && tmp_cb->zcd_txg + ZTEST_COMMIT_CB_THRESH < txg) { fatal(B_FALSE, "Commit callback threshold exceeded, " "oldest txg: %"PRIu64", open txg: %"PRIu64"\n", tmp_cb->zcd_txg, txg); } /* * Let's find the place to insert our callbacks. * * Even though the list is ordered by txg, it is possible for the * insertion point to not be the end because our txg may already be * quiescing at this point and other callbacks in the open txg * (from other objsets) may have sneaked in. */ tmp_cb = list_tail(&zcl.zcl_callbacks); while (tmp_cb != NULL && tmp_cb->zcd_txg > txg) tmp_cb = list_prev(&zcl.zcl_callbacks, tmp_cb); /* Add the 3 callbacks to the list */ for (i = 0; i < 3; i++) { if (tmp_cb == NULL) list_insert_head(&zcl.zcl_callbacks, cb_data[i]); else list_insert_after(&zcl.zcl_callbacks, tmp_cb, cb_data[i]); cb_data[i]->zcd_added = B_TRUE; VERIFY(!cb_data[i]->zcd_called); tmp_cb = cb_data[i]; } zc_cb_counter += 3; (void) mutex_exit(&zcl.zcl_callbacks_lock); dmu_tx_commit(tx); umem_free(od, sizeof (ztest_od_t)); } /* * Visit each object in the dataset. Verify that its properties * are consistent what was stored in the block tag when it was created, * and that its unused bonus buffer space has not been overwritten. */ void ztest_verify_dnode_bt(ztest_ds_t *zd, uint64_t id) { (void) id; objset_t *os = zd->zd_os; uint64_t obj; int err = 0; for (obj = 0; err == 0; err = dmu_object_next(os, &obj, FALSE, 0)) { ztest_block_tag_t *bt = NULL; dmu_object_info_t doi; dmu_buf_t *db; ztest_object_lock(zd, obj, ZTRL_READER); if (dmu_bonus_hold(os, obj, FTAG, &db) != 0) { ztest_object_unlock(zd, obj); continue; } dmu_object_info_from_db(db, &doi); if (doi.doi_bonus_size >= sizeof (*bt)) bt = ztest_bt_bonus(db); if (bt && bt->bt_magic == BT_MAGIC) { ztest_bt_verify(bt, os, obj, doi.doi_dnodesize, bt->bt_offset, bt->bt_gen, bt->bt_txg, bt->bt_crtxg); ztest_verify_unused_bonus(db, bt, obj, os, bt->bt_gen); } dmu_buf_rele(db, FTAG); ztest_object_unlock(zd, obj); } } void ztest_dsl_prop_get_set(ztest_ds_t *zd, uint64_t id) { (void) id; zfs_prop_t proplist[] = { ZFS_PROP_CHECKSUM, ZFS_PROP_COMPRESSION, ZFS_PROP_COPIES, ZFS_PROP_DEDUP }; (void) pthread_rwlock_rdlock(&ztest_name_lock); for (int p = 0; p < sizeof (proplist) / sizeof (proplist[0]); p++) { int error = ztest_dsl_prop_set_uint64(zd->zd_name, proplist[p], ztest_random_dsl_prop(proplist[p]), (int)ztest_random(2)); ASSERT(error == 0 || error == ENOSPC); } int error = ztest_dsl_prop_set_uint64(zd->zd_name, ZFS_PROP_RECORDSIZE, ztest_random_blocksize(), (int)ztest_random(2)); ASSERT(error == 0 || error == ENOSPC); (void) pthread_rwlock_unlock(&ztest_name_lock); } void ztest_spa_prop_get_set(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; nvlist_t *props = NULL; (void) pthread_rwlock_rdlock(&ztest_name_lock); (void) ztest_spa_prop_set_uint64(ZPOOL_PROP_AUTOTRIM, ztest_random(2)); VERIFY0(spa_prop_get(ztest_spa, &props)); if (ztest_opts.zo_verbose >= 6) dump_nvlist(props, 4); fnvlist_free(props); (void) pthread_rwlock_unlock(&ztest_name_lock); } static int user_release_one(const char *snapname, const char *holdname) { nvlist_t *snaps, *holds; int error; snaps = fnvlist_alloc(); holds = fnvlist_alloc(); fnvlist_add_boolean(holds, holdname); fnvlist_add_nvlist(snaps, snapname, holds); fnvlist_free(holds); error = dsl_dataset_user_release(snaps, NULL); fnvlist_free(snaps); return (error); } /* * Test snapshot hold/release and deferred destroy. */ void ztest_dmu_snapshot_hold(ztest_ds_t *zd, uint64_t id) { int error; objset_t *os = zd->zd_os; objset_t *origin; char snapname[100]; char fullname[100]; char clonename[100]; char tag[100]; char osname[ZFS_MAX_DATASET_NAME_LEN]; nvlist_t *holds; (void) pthread_rwlock_rdlock(&ztest_name_lock); dmu_objset_name(os, osname); (void) snprintf(snapname, sizeof (snapname), "sh1_%"PRIu64"", id); (void) snprintf(fullname, sizeof (fullname), "%s@%s", osname, snapname); (void) snprintf(clonename, sizeof (clonename), "%s/ch1_%"PRIu64"", osname, id); (void) snprintf(tag, sizeof (tag), "tag_%"PRIu64"", id); /* * Clean up from any previous run. */ error = dsl_destroy_head(clonename); if (error != ENOENT) ASSERT0(error); error = user_release_one(fullname, tag); if (error != ESRCH && error != ENOENT) ASSERT0(error); error = dsl_destroy_snapshot(fullname, B_FALSE); if (error != ENOENT) ASSERT0(error); /* * Create snapshot, clone it, mark snap for deferred destroy, * destroy clone, verify snap was also destroyed. */ error = dmu_objset_snapshot_one(osname, snapname); if (error) { if (error == ENOSPC) { ztest_record_enospc("dmu_objset_snapshot"); goto out; } fatal(B_FALSE, "dmu_objset_snapshot(%s) = %d", fullname, error); } error = dmu_objset_clone(clonename, fullname); if (error) { if (error == ENOSPC) { ztest_record_enospc("dmu_objset_clone"); goto out; } fatal(B_FALSE, "dmu_objset_clone(%s) = %d", clonename, error); } error = dsl_destroy_snapshot(fullname, B_TRUE); if (error) { fatal(B_FALSE, "dsl_destroy_snapshot(%s, B_TRUE) = %d", fullname, error); } error = dsl_destroy_head(clonename); if (error) fatal(B_FALSE, "dsl_destroy_head(%s) = %d", clonename, error); error = dmu_objset_hold(fullname, FTAG, &origin); if (error != ENOENT) fatal(B_FALSE, "dmu_objset_hold(%s) = %d", fullname, error); /* * Create snapshot, add temporary hold, verify that we can't * destroy a held snapshot, mark for deferred destroy, * release hold, verify snapshot was destroyed. */ error = dmu_objset_snapshot_one(osname, snapname); if (error) { if (error == ENOSPC) { ztest_record_enospc("dmu_objset_snapshot"); goto out; } fatal(B_FALSE, "dmu_objset_snapshot(%s) = %d", fullname, error); } holds = fnvlist_alloc(); fnvlist_add_string(holds, fullname, tag); error = dsl_dataset_user_hold(holds, 0, NULL); fnvlist_free(holds); if (error == ENOSPC) { ztest_record_enospc("dsl_dataset_user_hold"); goto out; } else if (error) { fatal(B_FALSE, "dsl_dataset_user_hold(%s, %s) = %u", fullname, tag, error); } error = dsl_destroy_snapshot(fullname, B_FALSE); if (error != EBUSY) { fatal(B_FALSE, "dsl_destroy_snapshot(%s, B_FALSE) = %d", fullname, error); } error = dsl_destroy_snapshot(fullname, B_TRUE); if (error) { fatal(B_FALSE, "dsl_destroy_snapshot(%s, B_TRUE) = %d", fullname, error); } error = user_release_one(fullname, tag); if (error) fatal(B_FALSE, "user_release_one(%s, %s) = %d", fullname, tag, error); VERIFY3U(dmu_objset_hold(fullname, FTAG, &origin), ==, ENOENT); out: (void) pthread_rwlock_unlock(&ztest_name_lock); } /* * Inject random faults into the on-disk data. */ void ztest_fault_inject(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; ztest_shared_t *zs = ztest_shared; spa_t *spa = ztest_spa; int fd; uint64_t offset; uint64_t leaves; uint64_t bad = 0x1990c0ffeedecadeull; uint64_t top, leaf; uint64_t raidz_children; char *path0; char *pathrand; size_t fsize; int bshift = SPA_MAXBLOCKSHIFT + 2; int iters = 1000; int maxfaults; int mirror_save; vdev_t *vd0 = NULL; uint64_t guid0 = 0; boolean_t islog = B_FALSE; boolean_t injected = B_FALSE; path0 = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); pathrand = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); mutex_enter(&ztest_vdev_lock); /* * Device removal is in progress, fault injection must be disabled * until it completes and the pool is scrubbed. The fault injection * strategy for damaging blocks does not take in to account evacuated * blocks which may have already been damaged. */ if (ztest_device_removal_active) goto out; /* * The fault injection strategy for damaging blocks cannot be used * if raidz expansion is in progress. The leaves value * (attached raidz children) is variable and strategy for damaging * blocks will corrupt same data blocks on different child vdevs * because of the reflow process. */ if (spa->spa_raidz_expand != NULL) goto out; maxfaults = MAXFAULTS(zs); raidz_children = ztest_get_raidz_children(spa); leaves = MAX(zs->zs_mirrors, 1) * raidz_children; mirror_save = zs->zs_mirrors; ASSERT3U(leaves, >=, 1); /* * While ztest is running the number of leaves will not change. This * is critical for the fault injection logic as it determines where * errors can be safely injected such that they are always repairable. * * When restarting ztest a different number of leaves may be requested * which will shift the regions to be damaged. This is fine as long * as the pool has been scrubbed prior to using the new mapping. * Failure to do can result in non-repairable damage being injected. */ if (ztest_pool_scrubbed == B_FALSE) goto out; /* * Grab the name lock as reader. There are some operations * which don't like to have their vdevs changed while * they are in progress (i.e. spa_change_guid). Those * operations will have grabbed the name lock as writer. */ (void) pthread_rwlock_rdlock(&ztest_name_lock); /* * We need SCL_STATE here because we're going to look at vd0->vdev_tsd. */ spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); if (ztest_random(2) == 0) { /* * Inject errors on a normal data device or slog device. */ top = ztest_random_vdev_top(spa, B_TRUE); leaf = ztest_random(leaves) + zs->zs_splits; /* * Generate paths to the first leaf in this top-level vdev, * and to the random leaf we selected. We'll induce transient * write failures and random online/offline activity on leaf 0, * and we'll write random garbage to the randomly chosen leaf. */ (void) snprintf(path0, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, ztest_opts.zo_pool, top * leaves + zs->zs_splits); (void) snprintf(pathrand, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, ztest_opts.zo_pool, top * leaves + leaf); vd0 = vdev_lookup_by_path(spa->spa_root_vdev, path0); if (vd0 != NULL && vd0->vdev_top->vdev_islog) islog = B_TRUE; /* * If the top-level vdev needs to be resilvered * then we only allow faults on the device that is * resilvering. */ if (vd0 != NULL && maxfaults != 1 && (!vdev_resilver_needed(vd0->vdev_top, NULL, NULL) || vd0->vdev_resilver_txg != 0)) { /* * Make vd0 explicitly claim to be unreadable, * or unwritable, or reach behind its back * and close the underlying fd. We can do this if * maxfaults == 0 because we'll fail and reexecute, * and we can do it if maxfaults >= 2 because we'll * have enough redundancy. If maxfaults == 1, the * combination of this with injection of random data * corruption below exceeds the pool's fault tolerance. */ vdev_file_t *vf = vd0->vdev_tsd; zfs_dbgmsg("injecting fault to vdev %llu; maxfaults=%d", (long long)vd0->vdev_id, (int)maxfaults); if (vf != NULL && ztest_random(3) == 0) { (void) close(vf->vf_file->f_fd); vf->vf_file->f_fd = -1; } else if (ztest_random(2) == 0) { vd0->vdev_cant_read = B_TRUE; } else { vd0->vdev_cant_write = B_TRUE; } guid0 = vd0->vdev_guid; } } else { /* * Inject errors on an l2cache device. */ spa_aux_vdev_t *sav = &spa->spa_l2cache; if (sav->sav_count == 0) { spa_config_exit(spa, SCL_STATE, FTAG); (void) pthread_rwlock_unlock(&ztest_name_lock); goto out; } vd0 = sav->sav_vdevs[ztest_random(sav->sav_count)]; guid0 = vd0->vdev_guid; (void) strlcpy(path0, vd0->vdev_path, MAXPATHLEN); (void) strlcpy(pathrand, vd0->vdev_path, MAXPATHLEN); leaf = 0; leaves = 1; maxfaults = INT_MAX; /* no limit on cache devices */ } spa_config_exit(spa, SCL_STATE, FTAG); (void) pthread_rwlock_unlock(&ztest_name_lock); /* * If we can tolerate two or more faults, or we're dealing * with a slog, randomly online/offline vd0. */ if ((maxfaults >= 2 || islog) && guid0 != 0) { if (ztest_random(10) < 6) { int flags = (ztest_random(2) == 0 ? ZFS_OFFLINE_TEMPORARY : 0); /* * We have to grab the zs_name_lock as writer to * prevent a race between offlining a slog and * destroying a dataset. Offlining the slog will * grab a reference on the dataset which may cause * dsl_destroy_head() to fail with EBUSY thus * leaving the dataset in an inconsistent state. */ if (islog) (void) pthread_rwlock_wrlock(&ztest_name_lock); VERIFY3U(vdev_offline(spa, guid0, flags), !=, EBUSY); if (islog) (void) pthread_rwlock_unlock(&ztest_name_lock); } else { /* * Ideally we would like to be able to randomly * call vdev_[on|off]line without holding locks * to force unpredictable failures but the side * effects of vdev_[on|off]line prevent us from * doing so. */ (void) vdev_online(spa, guid0, 0, NULL); } } if (maxfaults == 0) goto out; /* * We have at least single-fault tolerance, so inject data corruption. */ fd = open(pathrand, O_RDWR); if (fd == -1) /* we hit a gap in the device namespace */ goto out; fsize = lseek(fd, 0, SEEK_END); while (--iters != 0) { /* * The offset must be chosen carefully to ensure that * we do not inject a given logical block with errors * on two different leaf devices, because ZFS can not * tolerate that (if maxfaults==1). * * To achieve this we divide each leaf device into * chunks of size (# leaves * SPA_MAXBLOCKSIZE * 4). * Each chunk is further divided into error-injection * ranges (can accept errors) and clear ranges (we do * not inject errors in those). Each error-injection * range can accept errors only for a single leaf vdev. * Error-injection ranges are separated by clear ranges. * * For example, with 3 leaves, each chunk looks like: * 0 to 32M: injection range for leaf 0 * 32M to 64M: clear range - no injection allowed * 64M to 96M: injection range for leaf 1 * 96M to 128M: clear range - no injection allowed * 128M to 160M: injection range for leaf 2 * 160M to 192M: clear range - no injection allowed * * Each clear range must be large enough such that a * single block cannot straddle it. This way a block * can't be a target in two different injection ranges * (on different leaf vdevs). */ offset = ztest_random(fsize / (leaves << bshift)) * (leaves << bshift) + (leaf << bshift) + (ztest_random(1ULL << (bshift - 1)) & -8ULL); /* * Only allow damage to the labels at one end of the vdev. * * If all labels are damaged, the device will be totally * inaccessible, which will result in loss of data, * because we also damage (parts of) the other side of * the mirror/raidz. * * Additionally, we will always have both an even and an * odd label, so that we can handle crashes in the * middle of vdev_config_sync(). */ if ((leaf & 1) == 0 && offset < VDEV_LABEL_START_SIZE) continue; /* * The two end labels are stored at the "end" of the disk, but * the end of the disk (vdev_psize) is aligned to * sizeof (vdev_label_t). */ uint64_t psize = P2ALIGN_TYPED(fsize, sizeof (vdev_label_t), uint64_t); if ((leaf & 1) == 1 && offset + sizeof (bad) > psize - VDEV_LABEL_END_SIZE) continue; if (mirror_save != zs->zs_mirrors) { (void) close(fd); goto out; } if (pwrite(fd, &bad, sizeof (bad), offset) != sizeof (bad)) fatal(B_TRUE, "can't inject bad word at 0x%"PRIx64" in %s", offset, pathrand); if (ztest_opts.zo_verbose >= 7) (void) printf("injected bad word into %s," " offset 0x%"PRIx64"\n", pathrand, offset); injected = B_TRUE; } (void) close(fd); out: mutex_exit(&ztest_vdev_lock); if (injected && ztest_opts.zo_raid_do_expand) { int error = spa_scan(spa, POOL_SCAN_SCRUB); if (error == 0) { while (dsl_scan_scrubbing(spa_get_dsl(spa))) txg_wait_synced(spa_get_dsl(spa), 0); } } umem_free(path0, MAXPATHLEN); umem_free(pathrand, MAXPATHLEN); } /* * By design ztest will never inject uncorrectable damage in to the pool. * Issue a scrub, wait for it to complete, and verify there is never any * persistent damage. * * Only after a full scrub has been completed is it safe to start injecting * data corruption. See the comment in zfs_fault_inject(). */ static int ztest_scrub_impl(spa_t *spa) { int error = spa_scan(spa, POOL_SCAN_SCRUB); if (error) return (error); while (dsl_scan_scrubbing(spa_get_dsl(spa))) txg_wait_synced(spa_get_dsl(spa), 0); if (spa_approx_errlog_size(spa) > 0) return (ECKSUM); ztest_pool_scrubbed = B_TRUE; return (0); } /* * Scrub the pool. */ void ztest_scrub(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; int error; /* * Scrub in progress by device removal. */ if (ztest_device_removal_active) return; /* * Start a scrub, wait a moment, then force a restart. */ (void) spa_scan(spa, POOL_SCAN_SCRUB); (void) poll(NULL, 0, 100); error = ztest_scrub_impl(spa); if (error == EBUSY) error = 0; ASSERT0(error); } /* * Change the guid for the pool. */ void ztest_reguid(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; uint64_t orig, load; int error; ztest_shared_t *zs = ztest_shared; if (ztest_opts.zo_mmp_test) return; orig = spa_guid(spa); load = spa_load_guid(spa); (void) pthread_rwlock_wrlock(&ztest_name_lock); error = spa_change_guid(spa); zs->zs_guid = spa_guid(spa); (void) pthread_rwlock_unlock(&ztest_name_lock); if (error != 0) return; if (ztest_opts.zo_verbose >= 4) { (void) printf("Changed guid old %"PRIu64" -> %"PRIu64"\n", orig, spa_guid(spa)); } VERIFY3U(orig, !=, spa_guid(spa)); VERIFY3U(load, ==, spa_load_guid(spa)); } void ztest_blake3(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; hrtime_t end = gethrtime() + NANOSEC; zio_cksum_salt_t salt; void *salt_ptr = &salt.zcs_bytes; struct abd *abd_data, *abd_meta; void *buf, *templ; int i, *ptr; uint32_t size; BLAKE3_CTX ctx; const zfs_impl_t *blake3 = zfs_impl_get_ops("blake3"); size = ztest_random_blocksize(); buf = umem_alloc(size, UMEM_NOFAIL); abd_data = abd_alloc(size, B_FALSE); abd_meta = abd_alloc(size, B_TRUE); for (i = 0, ptr = buf; i < size / sizeof (*ptr); i++, ptr++) *ptr = ztest_random(UINT_MAX); memset(salt_ptr, 'A', 32); abd_copy_from_buf_off(abd_data, buf, 0, size); abd_copy_from_buf_off(abd_meta, buf, 0, size); while (gethrtime() <= end) { int run_count = 100; zio_cksum_t zc_ref1, zc_ref2; zio_cksum_t zc_res1, zc_res2; void *ref1 = &zc_ref1; void *ref2 = &zc_ref2; void *res1 = &zc_res1; void *res2 = &zc_res2; /* BLAKE3_KEY_LEN = 32 */ VERIFY0(blake3->setname("generic")); templ = abd_checksum_blake3_tmpl_init(&salt); Blake3_InitKeyed(&ctx, salt_ptr); Blake3_Update(&ctx, buf, size); Blake3_Final(&ctx, ref1); zc_ref2 = zc_ref1; ZIO_CHECKSUM_BSWAP(&zc_ref2); abd_checksum_blake3_tmpl_free(templ); VERIFY0(blake3->setname("cycle")); while (run_count-- > 0) { /* Test current implementation */ Blake3_InitKeyed(&ctx, salt_ptr); Blake3_Update(&ctx, buf, size); Blake3_Final(&ctx, res1); zc_res2 = zc_res1; ZIO_CHECKSUM_BSWAP(&zc_res2); VERIFY0(memcmp(ref1, res1, 32)); VERIFY0(memcmp(ref2, res2, 32)); /* Test ABD - data */ templ = abd_checksum_blake3_tmpl_init(&salt); abd_checksum_blake3_native(abd_data, size, templ, &zc_res1); abd_checksum_blake3_byteswap(abd_data, size, templ, &zc_res2); VERIFY0(memcmp(ref1, res1, 32)); VERIFY0(memcmp(ref2, res2, 32)); /* Test ABD - metadata */ abd_checksum_blake3_native(abd_meta, size, templ, &zc_res1); abd_checksum_blake3_byteswap(abd_meta, size, templ, &zc_res2); abd_checksum_blake3_tmpl_free(templ); VERIFY0(memcmp(ref1, res1, 32)); VERIFY0(memcmp(ref2, res2, 32)); } } abd_free(abd_data); abd_free(abd_meta); umem_free(buf, size); } void ztest_fletcher(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; hrtime_t end = gethrtime() + NANOSEC; while (gethrtime() <= end) { int run_count = 100; void *buf; struct abd *abd_data, *abd_meta; uint32_t size; int *ptr; int i; zio_cksum_t zc_ref; zio_cksum_t zc_ref_byteswap; size = ztest_random_blocksize(); buf = umem_alloc(size, UMEM_NOFAIL); abd_data = abd_alloc(size, B_FALSE); abd_meta = abd_alloc(size, B_TRUE); for (i = 0, ptr = buf; i < size / sizeof (*ptr); i++, ptr++) *ptr = ztest_random(UINT_MAX); abd_copy_from_buf_off(abd_data, buf, 0, size); abd_copy_from_buf_off(abd_meta, buf, 0, size); VERIFY0(fletcher_4_impl_set("scalar")); fletcher_4_native(buf, size, NULL, &zc_ref); fletcher_4_byteswap(buf, size, NULL, &zc_ref_byteswap); VERIFY0(fletcher_4_impl_set("cycle")); while (run_count-- > 0) { zio_cksum_t zc; zio_cksum_t zc_byteswap; fletcher_4_byteswap(buf, size, NULL, &zc_byteswap); fletcher_4_native(buf, size, NULL, &zc); VERIFY0(memcmp(&zc, &zc_ref, sizeof (zc))); VERIFY0(memcmp(&zc_byteswap, &zc_ref_byteswap, sizeof (zc_byteswap))); /* Test ABD - data */ abd_fletcher_4_byteswap(abd_data, size, NULL, &zc_byteswap); abd_fletcher_4_native(abd_data, size, NULL, &zc); VERIFY0(memcmp(&zc, &zc_ref, sizeof (zc))); VERIFY0(memcmp(&zc_byteswap, &zc_ref_byteswap, sizeof (zc_byteswap))); /* Test ABD - metadata */ abd_fletcher_4_byteswap(abd_meta, size, NULL, &zc_byteswap); abd_fletcher_4_native(abd_meta, size, NULL, &zc); VERIFY0(memcmp(&zc, &zc_ref, sizeof (zc))); VERIFY0(memcmp(&zc_byteswap, &zc_ref_byteswap, sizeof (zc_byteswap))); } umem_free(buf, size); abd_free(abd_data); abd_free(abd_meta); } } void ztest_fletcher_incr(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; void *buf; size_t size; int *ptr; int i; zio_cksum_t zc_ref; zio_cksum_t zc_ref_bswap; hrtime_t end = gethrtime() + NANOSEC; while (gethrtime() <= end) { int run_count = 100; size = ztest_random_blocksize(); buf = umem_alloc(size, UMEM_NOFAIL); for (i = 0, ptr = buf; i < size / sizeof (*ptr); i++, ptr++) *ptr = ztest_random(UINT_MAX); VERIFY0(fletcher_4_impl_set("scalar")); fletcher_4_native(buf, size, NULL, &zc_ref); fletcher_4_byteswap(buf, size, NULL, &zc_ref_bswap); VERIFY0(fletcher_4_impl_set("cycle")); while (run_count-- > 0) { zio_cksum_t zc; zio_cksum_t zc_bswap; size_t pos = 0; ZIO_SET_CHECKSUM(&zc, 0, 0, 0, 0); ZIO_SET_CHECKSUM(&zc_bswap, 0, 0, 0, 0); while (pos < size) { size_t inc = 64 * ztest_random(size / 67); /* sometimes add few bytes to test non-simd */ if (ztest_random(100) < 10) inc += P2ALIGN_TYPED(ztest_random(64), sizeof (uint32_t), uint64_t); if (inc > (size - pos)) inc = size - pos; fletcher_4_incremental_native(buf + pos, inc, &zc); fletcher_4_incremental_byteswap(buf + pos, inc, &zc_bswap); pos += inc; } VERIFY3U(pos, ==, size); VERIFY(ZIO_CHECKSUM_EQUAL(zc, zc_ref)); VERIFY(ZIO_CHECKSUM_EQUAL(zc_bswap, zc_ref_bswap)); /* * verify if incremental on the whole buffer is * equivalent to non-incremental version */ ZIO_SET_CHECKSUM(&zc, 0, 0, 0, 0); ZIO_SET_CHECKSUM(&zc_bswap, 0, 0, 0, 0); fletcher_4_incremental_native(buf, size, &zc); fletcher_4_incremental_byteswap(buf, size, &zc_bswap); VERIFY(ZIO_CHECKSUM_EQUAL(zc, zc_ref)); VERIFY(ZIO_CHECKSUM_EQUAL(zc_bswap, zc_ref_bswap)); } umem_free(buf, size); } } static int ztest_set_global_vars(void) { for (size_t i = 0; i < ztest_opts.zo_gvars_count; i++) { char *kv = ztest_opts.zo_gvars[i]; VERIFY3U(strlen(kv), <=, ZO_GVARS_MAX_ARGLEN); VERIFY3U(strlen(kv), >, 0); int err = set_global_var(kv); if (ztest_opts.zo_verbose > 0) { (void) printf("setting global var %s ... %s\n", kv, err ? "failed" : "ok"); } if (err != 0) { (void) fprintf(stderr, "failed to set global var '%s'\n", kv); return (err); } } return (0); } static char ** ztest_global_vars_to_zdb_args(void) { char **args = calloc(2*ztest_opts.zo_gvars_count + 1, sizeof (char *)); char **cur = args; if (args == NULL) return (NULL); for (size_t i = 0; i < ztest_opts.zo_gvars_count; i++) { *cur++ = (char *)"-o"; *cur++ = ztest_opts.zo_gvars[i]; } ASSERT3P(cur, ==, &args[2*ztest_opts.zo_gvars_count]); *cur = NULL; return (args); } /* The end of strings is indicated by a NULL element */ static char * join_strings(char **strings, const char *sep) { size_t totallen = 0; for (char **sp = strings; *sp != NULL; sp++) { totallen += strlen(*sp); totallen += strlen(sep); } if (totallen > 0) { ASSERT(totallen >= strlen(sep)); totallen -= strlen(sep); } size_t buflen = totallen + 1; char *o = umem_alloc(buflen, UMEM_NOFAIL); /* trailing 0 byte */ o[0] = '\0'; for (char **sp = strings; *sp != NULL; sp++) { size_t would; would = strlcat(o, *sp, buflen); VERIFY3U(would, <, buflen); if (*(sp+1) == NULL) { break; } would = strlcat(o, sep, buflen); VERIFY3U(would, <, buflen); } ASSERT3S(strlen(o), ==, totallen); return (o); } static int ztest_check_path(char *path) { struct stat s; /* return true on success */ return (!stat(path, &s)); } static void ztest_get_zdb_bin(char *bin, int len) { char *zdb_path; /* * Try to use $ZDB and in-tree zdb path. If not successful, just * let popen to search through PATH. */ if ((zdb_path = getenv("ZDB"))) { strlcpy(bin, zdb_path, len); /* In env */ if (!ztest_check_path(bin)) { ztest_dump_core = 0; fatal(B_TRUE, "invalid ZDB '%s'", bin); } return; } VERIFY3P(realpath(getexecname(), bin), !=, NULL); if (strstr(bin, ".libs/ztest")) { strstr(bin, ".libs/ztest")[0] = '\0'; /* In-tree */ strcat(bin, "zdb"); if (ztest_check_path(bin)) return; } strcpy(bin, "zdb"); } static vdev_t * ztest_random_concrete_vdev_leaf(vdev_t *vd) { if (vd == NULL) return (NULL); if (vd->vdev_children == 0) return (vd); vdev_t *eligible[vd->vdev_children]; int eligible_idx = 0, i; for (i = 0; i < vd->vdev_children; i++) { vdev_t *cvd = vd->vdev_child[i]; if (cvd->vdev_top->vdev_removing) continue; if (cvd->vdev_children > 0 || (vdev_is_concrete(cvd) && !cvd->vdev_detached)) { eligible[eligible_idx++] = cvd; } } VERIFY3S(eligible_idx, >, 0); uint64_t child_no = ztest_random(eligible_idx); return (ztest_random_concrete_vdev_leaf(eligible[child_no])); } void ztest_initialize(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; int error = 0; mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); /* Random leaf vdev */ vdev_t *rand_vd = ztest_random_concrete_vdev_leaf(spa->spa_root_vdev); if (rand_vd == NULL) { spa_config_exit(spa, SCL_VDEV, FTAG); mutex_exit(&ztest_vdev_lock); return; } /* * The random vdev we've selected may change as soon as we * drop the spa_config_lock. We create local copies of things * we're interested in. */ uint64_t guid = rand_vd->vdev_guid; char *path = strdup(rand_vd->vdev_path); boolean_t active = rand_vd->vdev_initialize_thread != NULL; zfs_dbgmsg("vd %px, guid %llu", rand_vd, (u_longlong_t)guid); spa_config_exit(spa, SCL_VDEV, FTAG); uint64_t cmd = ztest_random(POOL_INITIALIZE_FUNCS); nvlist_t *vdev_guids = fnvlist_alloc(); nvlist_t *vdev_errlist = fnvlist_alloc(); fnvlist_add_uint64(vdev_guids, path, guid); error = spa_vdev_initialize(spa, vdev_guids, cmd, vdev_errlist); fnvlist_free(vdev_guids); fnvlist_free(vdev_errlist); switch (cmd) { case POOL_INITIALIZE_CANCEL: if (ztest_opts.zo_verbose >= 4) { (void) printf("Cancel initialize %s", path); if (!active) (void) printf(" failed (no initialize active)"); (void) printf("\n"); } break; case POOL_INITIALIZE_START: if (ztest_opts.zo_verbose >= 4) { (void) printf("Start initialize %s", path); if (active && error == 0) (void) printf(" failed (already active)"); else if (error != 0) (void) printf(" failed (error %d)", error); (void) printf("\n"); } break; case POOL_INITIALIZE_SUSPEND: if (ztest_opts.zo_verbose >= 4) { (void) printf("Suspend initialize %s", path); if (!active) (void) printf(" failed (no initialize active)"); (void) printf("\n"); } break; } free(path); mutex_exit(&ztest_vdev_lock); } void ztest_trim(ztest_ds_t *zd, uint64_t id) { (void) zd, (void) id; spa_t *spa = ztest_spa; int error = 0; mutex_enter(&ztest_vdev_lock); spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); /* Random leaf vdev */ vdev_t *rand_vd = ztest_random_concrete_vdev_leaf(spa->spa_root_vdev); if (rand_vd == NULL) { spa_config_exit(spa, SCL_VDEV, FTAG); mutex_exit(&ztest_vdev_lock); return; } /* * The random vdev we've selected may change as soon as we * drop the spa_config_lock. We create local copies of things * we're interested in. */ uint64_t guid = rand_vd->vdev_guid; char *path = strdup(rand_vd->vdev_path); boolean_t active = rand_vd->vdev_trim_thread != NULL; zfs_dbgmsg("vd %p, guid %llu", rand_vd, (u_longlong_t)guid); spa_config_exit(spa, SCL_VDEV, FTAG); uint64_t cmd = ztest_random(POOL_TRIM_FUNCS); uint64_t rate = 1 << ztest_random(30); boolean_t partial = (ztest_random(5) > 0); boolean_t secure = (ztest_random(5) > 0); nvlist_t *vdev_guids = fnvlist_alloc(); nvlist_t *vdev_errlist = fnvlist_alloc(); fnvlist_add_uint64(vdev_guids, path, guid); error = spa_vdev_trim(spa, vdev_guids, cmd, rate, partial, secure, vdev_errlist); fnvlist_free(vdev_guids); fnvlist_free(vdev_errlist); switch (cmd) { case POOL_TRIM_CANCEL: if (ztest_opts.zo_verbose >= 4) { (void) printf("Cancel TRIM %s", path); if (!active) (void) printf(" failed (no TRIM active)"); (void) printf("\n"); } break; case POOL_TRIM_START: if (ztest_opts.zo_verbose >= 4) { (void) printf("Start TRIM %s", path); if (active && error == 0) (void) printf(" failed (already active)"); else if (error != 0) (void) printf(" failed (error %d)", error); (void) printf("\n"); } break; case POOL_TRIM_SUSPEND: if (ztest_opts.zo_verbose >= 4) { (void) printf("Suspend TRIM %s", path); if (!active) (void) printf(" failed (no TRIM active)"); (void) printf("\n"); } break; } free(path); mutex_exit(&ztest_vdev_lock); } /* * Verify pool integrity by running zdb. */ static void ztest_run_zdb(uint64_t guid) { int status; char *bin; char *zdb; char *zbuf; const int len = MAXPATHLEN + MAXNAMELEN + 20; FILE *fp; bin = umem_alloc(len, UMEM_NOFAIL); zdb = umem_alloc(len, UMEM_NOFAIL); zbuf = umem_alloc(1024, UMEM_NOFAIL); ztest_get_zdb_bin(bin, len); char **set_gvars_args = ztest_global_vars_to_zdb_args(); if (set_gvars_args == NULL) { fatal(B_FALSE, "Failed to allocate memory in " "ztest_global_vars_to_zdb_args(). Cannot run zdb.\n"); } char *set_gvars_args_joined = join_strings(set_gvars_args, " "); free(set_gvars_args); size_t would = snprintf(zdb, len, "%s -bcc%s%s -G -d -Y -e -y %s -p %s %"PRIu64, bin, ztest_opts.zo_verbose >= 3 ? "s" : "", ztest_opts.zo_verbose >= 4 ? "v" : "", set_gvars_args_joined, ztest_opts.zo_dir, guid); ASSERT3U(would, <, len); umem_free(set_gvars_args_joined, strlen(set_gvars_args_joined) + 1); if (ztest_opts.zo_verbose >= 5) (void) printf("Executing %s\n", zdb); fp = popen(zdb, "r"); while (fgets(zbuf, 1024, fp) != NULL) if (ztest_opts.zo_verbose >= 3) (void) printf("%s", zbuf); status = pclose(fp); if (status == 0) goto out; ztest_dump_core = 0; if (WIFEXITED(status)) fatal(B_FALSE, "'%s' exit code %d", zdb, WEXITSTATUS(status)); else fatal(B_FALSE, "'%s' died with signal %d", zdb, WTERMSIG(status)); out: umem_free(bin, len); umem_free(zdb, len); umem_free(zbuf, 1024); } static void ztest_walk_pool_directory(const char *header) { spa_t *spa = NULL; if (ztest_opts.zo_verbose >= 6) (void) puts(header); mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa)) != NULL) if (ztest_opts.zo_verbose >= 6) (void) printf("\t%s\n", spa_name(spa)); mutex_exit(&spa_namespace_lock); } static void ztest_spa_import_export(char *oldname, char *newname) { nvlist_t *config, *newconfig; uint64_t pool_guid; spa_t *spa; int error; if (ztest_opts.zo_verbose >= 4) { (void) printf("import/export: old = %s, new = %s\n", oldname, newname); } /* * Clean up from previous runs. */ (void) spa_destroy(newname); /* * Get the pool's configuration and guid. */ VERIFY0(spa_open(oldname, &spa, FTAG)); /* * Kick off a scrub to tickle scrub/export races. */ if (ztest_random(2) == 0) (void) spa_scan(spa, POOL_SCAN_SCRUB); pool_guid = spa_guid(spa); spa_close(spa, FTAG); ztest_walk_pool_directory("pools before export"); /* * Export it. */ VERIFY0(spa_export(oldname, &config, B_FALSE, B_FALSE)); ztest_walk_pool_directory("pools after export"); /* * Try to import it. */ newconfig = spa_tryimport(config); ASSERT3P(newconfig, !=, NULL); fnvlist_free(newconfig); /* * Import it under the new name. */ error = spa_import(newname, config, NULL, 0); if (error != 0) { dump_nvlist(config, 0); fatal(B_FALSE, "couldn't import pool %s as %s: error %u", oldname, newname, error); } ztest_walk_pool_directory("pools after import"); /* * Try to import it again -- should fail with EEXIST. */ VERIFY3U(EEXIST, ==, spa_import(newname, config, NULL, 0)); /* * Try to import it under a different name -- should fail with EEXIST. */ VERIFY3U(EEXIST, ==, spa_import(oldname, config, NULL, 0)); /* * Verify that the pool is no longer visible under the old name. */ VERIFY3U(ENOENT, ==, spa_open(oldname, &spa, FTAG)); /* * Verify that we can open and close the pool using the new name. */ VERIFY0(spa_open(newname, &spa, FTAG)); ASSERT3U(pool_guid, ==, spa_guid(spa)); spa_close(spa, FTAG); fnvlist_free(config); } static void ztest_resume(spa_t *spa) { if (spa_suspended(spa) && ztest_opts.zo_verbose >= 6) (void) printf("resuming from suspended state\n"); spa_vdev_state_enter(spa, SCL_NONE); vdev_clear(spa, NULL); (void) spa_vdev_state_exit(spa, NULL, 0); (void) zio_resume(spa); } static __attribute__((noreturn)) void ztest_resume_thread(void *arg) { spa_t *spa = arg; while (!ztest_exiting) { if (spa_suspended(spa)) ztest_resume(spa); (void) poll(NULL, 0, 100); /* * Periodically change the zfs_compressed_arc_enabled setting. */ if (ztest_random(10) == 0) zfs_compressed_arc_enabled = ztest_random(2); /* * Periodically change the zfs_abd_scatter_enabled setting. */ if (ztest_random(10) == 0) zfs_abd_scatter_enabled = ztest_random(2); } thread_exit(); } static __attribute__((noreturn)) void ztest_deadman_thread(void *arg) { ztest_shared_t *zs = arg; spa_t *spa = ztest_spa; hrtime_t delay, overdue, last_run = gethrtime(); delay = (zs->zs_thread_stop - zs->zs_thread_start) + MSEC2NSEC(zfs_deadman_synctime_ms); while (!ztest_exiting) { /* * Wait for the delay timer while checking occasionally * if we should stop. */ if (gethrtime() < last_run + delay) { (void) poll(NULL, 0, 1000); continue; } /* * If the pool is suspended then fail immediately. Otherwise, * check to see if the pool is making any progress. If * vdev_deadman() discovers that there hasn't been any recent * I/Os then it will end up aborting the tests. */ if (spa_suspended(spa) || spa->spa_root_vdev == NULL) { fatal(B_FALSE, "aborting test after %llu seconds because " "pool has transitioned to a suspended state.", (u_longlong_t)zfs_deadman_synctime_ms / 1000); } vdev_deadman(spa->spa_root_vdev, FTAG); /* * If the process doesn't complete within a grace period of * zfs_deadman_synctime_ms over the expected finish time, * then it may be hung and is terminated. */ overdue = zs->zs_proc_stop + MSEC2NSEC(zfs_deadman_synctime_ms); if (gethrtime() > overdue) { fatal(B_FALSE, "aborting test after %llu seconds because " "the process is overdue for termination.", (gethrtime() - zs->zs_proc_start) / NANOSEC); } (void) printf("ztest has been running for %lld seconds\n", (gethrtime() - zs->zs_proc_start) / NANOSEC); last_run = gethrtime(); delay = MSEC2NSEC(zfs_deadman_checktime_ms); } thread_exit(); } static void ztest_execute(int test, ztest_info_t *zi, uint64_t id) { ztest_ds_t *zd = &ztest_ds[id % ztest_opts.zo_datasets]; ztest_shared_callstate_t *zc = ZTEST_GET_SHARED_CALLSTATE(test); hrtime_t functime = gethrtime(); int i; for (i = 0; i < zi->zi_iters; i++) zi->zi_func(zd, id); functime = gethrtime() - functime; atomic_add_64(&zc->zc_count, 1); atomic_add_64(&zc->zc_time, functime); if (ztest_opts.zo_verbose >= 4) (void) printf("%6.2f sec in %s\n", (double)functime / NANOSEC, zi->zi_funcname); } typedef struct ztest_raidz_expand_io { uint64_t rzx_id; uint64_t rzx_amount; uint64_t rzx_bufsize; const void *rzx_buffer; uint64_t rzx_alloc_max; spa_t *rzx_spa; } ztest_expand_io_t; #undef OD_ARRAY_SIZE #define OD_ARRAY_SIZE 10 /* * Write a request amount of data to some dataset objects. * There will be ztest_opts.zo_threads count of these running in parallel. */ static __attribute__((noreturn)) void ztest_rzx_thread(void *arg) { ztest_expand_io_t *info = (ztest_expand_io_t *)arg; ztest_od_t *od; int batchsize; int od_size; ztest_ds_t *zd = &ztest_ds[info->rzx_id % ztest_opts.zo_datasets]; spa_t *spa = info->rzx_spa; od_size = sizeof (ztest_od_t) * OD_ARRAY_SIZE; od = umem_alloc(od_size, UMEM_NOFAIL); batchsize = OD_ARRAY_SIZE; /* Create objects to write to */ for (int b = 0; b < batchsize; b++) { ztest_od_init(od + b, info->rzx_id, FTAG, b, DMU_OT_UINT64_OTHER, 0, 0, 0); } if (ztest_object_init(zd, od, od_size, B_FALSE) != 0) { umem_free(od, od_size); thread_exit(); } for (uint64_t offset = 0, written = 0; written < info->rzx_amount; offset += info->rzx_bufsize) { /* write to 10 objects */ for (int i = 0; i < batchsize && written < info->rzx_amount; i++) { (void) pthread_rwlock_rdlock(&zd->zd_zilog_lock); ztest_write(zd, od[i].od_object, offset, info->rzx_bufsize, info->rzx_buffer); (void) pthread_rwlock_unlock(&zd->zd_zilog_lock); written += info->rzx_bufsize; } txg_wait_synced(spa_get_dsl(spa), 0); /* due to inflation, we'll typically bail here */ if (metaslab_class_get_alloc(spa_normal_class(spa)) > info->rzx_alloc_max) { break; } } /* Remove a few objects to leave some holes in allocation space */ mutex_enter(&zd->zd_dirobj_lock); (void) ztest_remove(zd, od, 2); mutex_exit(&zd->zd_dirobj_lock); umem_free(od, od_size); thread_exit(); } static __attribute__((noreturn)) void ztest_thread(void *arg) { int rand; uint64_t id = (uintptr_t)arg; ztest_shared_t *zs = ztest_shared; uint64_t call_next; hrtime_t now; ztest_info_t *zi; ztest_shared_callstate_t *zc; while ((now = gethrtime()) < zs->zs_thread_stop) { /* * See if it's time to force a crash. */ if (now > zs->zs_thread_kill && raidz_expand_pause_point == RAIDZ_EXPAND_PAUSE_NONE) { ztest_kill(zs); } /* * If we're getting ENOSPC with some regularity, stop. */ if (zs->zs_enospc_count > 10) break; /* * Pick a random function to execute. */ rand = ztest_random(ZTEST_FUNCS); zi = &ztest_info[rand]; zc = ZTEST_GET_SHARED_CALLSTATE(rand); call_next = zc->zc_next; if (now >= call_next && atomic_cas_64(&zc->zc_next, call_next, call_next + ztest_random(2 * zi->zi_interval[0] + 1)) == call_next) { ztest_execute(rand, zi, id); } } thread_exit(); } static void ztest_dataset_name(char *dsname, const char *pool, int d) { (void) snprintf(dsname, ZFS_MAX_DATASET_NAME_LEN, "%s/ds_%d", pool, d); } static void ztest_dataset_destroy(int d) { char name[ZFS_MAX_DATASET_NAME_LEN]; int t; ztest_dataset_name(name, ztest_opts.zo_pool, d); if (ztest_opts.zo_verbose >= 3) (void) printf("Destroying %s to free up space\n", name); /* * Cleanup any non-standard clones and snapshots. In general, * ztest thread t operates on dataset (t % zopt_datasets), * so there may be more than one thing to clean up. */ for (t = d; t < ztest_opts.zo_threads; t += ztest_opts.zo_datasets) ztest_dsl_dataset_cleanup(name, t); (void) dmu_objset_find(name, ztest_objset_destroy_cb, NULL, DS_FIND_SNAPSHOTS | DS_FIND_CHILDREN); } static void ztest_dataset_dirobj_verify(ztest_ds_t *zd) { uint64_t usedobjs, dirobjs, scratch; /* * ZTEST_DIROBJ is the object directory for the entire dataset. * Therefore, the number of objects in use should equal the * number of ZTEST_DIROBJ entries, +1 for ZTEST_DIROBJ itself. * If not, we have an object leak. * * Note that we can only check this in ztest_dataset_open(), * when the open-context and syncing-context values agree. * That's because zap_count() returns the open-context value, * while dmu_objset_space() returns the rootbp fill count. */ VERIFY0(zap_count(zd->zd_os, ZTEST_DIROBJ, &dirobjs)); dmu_objset_space(zd->zd_os, &scratch, &scratch, &usedobjs, &scratch); ASSERT3U(dirobjs + 1, ==, usedobjs); } static int ztest_dataset_open(int d) { ztest_ds_t *zd = &ztest_ds[d]; uint64_t committed_seq = ZTEST_GET_SHARED_DS(d)->zd_seq; objset_t *os; zilog_t *zilog; char name[ZFS_MAX_DATASET_NAME_LEN]; int error; ztest_dataset_name(name, ztest_opts.zo_pool, d); (void) pthread_rwlock_rdlock(&ztest_name_lock); error = ztest_dataset_create(name); if (error == ENOSPC) { (void) pthread_rwlock_unlock(&ztest_name_lock); ztest_record_enospc(FTAG); return (error); } ASSERT(error == 0 || error == EEXIST); VERIFY0(ztest_dmu_objset_own(name, DMU_OST_OTHER, B_FALSE, B_TRUE, zd, &os)); (void) pthread_rwlock_unlock(&ztest_name_lock); ztest_zd_init(zd, ZTEST_GET_SHARED_DS(d), os); zilog = zd->zd_zilog; if (zilog->zl_header->zh_claim_lr_seq != 0 && zilog->zl_header->zh_claim_lr_seq < committed_seq) fatal(B_FALSE, "missing log records: " "claimed %"PRIu64" < committed %"PRIu64"", zilog->zl_header->zh_claim_lr_seq, committed_seq); ztest_dataset_dirobj_verify(zd); zil_replay(os, zd, ztest_replay_vector); ztest_dataset_dirobj_verify(zd); if (ztest_opts.zo_verbose >= 6) (void) printf("%s replay %"PRIu64" blocks, " "%"PRIu64" records, seq %"PRIu64"\n", zd->zd_name, zilog->zl_parse_blk_count, zilog->zl_parse_lr_count, zilog->zl_replaying_seq); zilog = zil_open(os, ztest_get_data, NULL); if (zilog->zl_replaying_seq != 0 && zilog->zl_replaying_seq < committed_seq) fatal(B_FALSE, "missing log records: " "replayed %"PRIu64" < committed %"PRIu64"", zilog->zl_replaying_seq, committed_seq); return (0); } static void ztest_dataset_close(int d) { ztest_ds_t *zd = &ztest_ds[d]; zil_close(zd->zd_zilog); dmu_objset_disown(zd->zd_os, B_TRUE, zd); ztest_zd_fini(zd); } static int ztest_replay_zil_cb(const char *name, void *arg) { (void) arg; objset_t *os; ztest_ds_t *zdtmp; VERIFY0(ztest_dmu_objset_own(name, DMU_OST_ANY, B_TRUE, B_TRUE, FTAG, &os)); zdtmp = umem_alloc(sizeof (ztest_ds_t), UMEM_NOFAIL); ztest_zd_init(zdtmp, NULL, os); zil_replay(os, zdtmp, ztest_replay_vector); ztest_zd_fini(zdtmp); if (dmu_objset_zil(os)->zl_parse_lr_count != 0 && ztest_opts.zo_verbose >= 6) { zilog_t *zilog = dmu_objset_zil(os); (void) printf("%s replay %"PRIu64" blocks, " "%"PRIu64" records, seq %"PRIu64"\n", name, zilog->zl_parse_blk_count, zilog->zl_parse_lr_count, zilog->zl_replaying_seq); } umem_free(zdtmp, sizeof (ztest_ds_t)); dmu_objset_disown(os, B_TRUE, FTAG); return (0); } static void ztest_freeze(void) { ztest_ds_t *zd = &ztest_ds[0]; spa_t *spa; int numloops = 0; /* freeze not supported during RAIDZ expansion */ if (ztest_opts.zo_raid_do_expand) return; if (ztest_opts.zo_verbose >= 3) (void) printf("testing spa_freeze()...\n"); raidz_scratch_verify(); kernel_init(SPA_MODE_READ | SPA_MODE_WRITE); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); VERIFY0(ztest_dataset_open(0)); ztest_spa = spa; /* * Force the first log block to be transactionally allocated. * We have to do this before we freeze the pool -- otherwise * the log chain won't be anchored. */ while (BP_IS_HOLE(&zd->zd_zilog->zl_header->zh_log)) { ztest_dmu_object_alloc_free(zd, 0); zil_commit(zd->zd_zilog, 0); } txg_wait_synced(spa_get_dsl(spa), 0); /* * Freeze the pool. This stops spa_sync() from doing anything, * so that the only way to record changes from now on is the ZIL. */ spa_freeze(spa); /* * Because it is hard to predict how much space a write will actually * require beforehand, we leave ourselves some fudge space to write over * capacity. */ uint64_t capacity = metaslab_class_get_space(spa_normal_class(spa)) / 2; /* * Run tests that generate log records but don't alter the pool config * or depend on DSL sync tasks (snapshots, objset create/destroy, etc). * We do a txg_wait_synced() after each iteration to force the txg * to increase well beyond the last synced value in the uberblock. * The ZIL should be OK with that. * * Run a random number of times less than zo_maxloops and ensure we do * not run out of space on the pool. */ while (ztest_random(10) != 0 && numloops++ < ztest_opts.zo_maxloops && metaslab_class_get_alloc(spa_normal_class(spa)) < capacity) { ztest_od_t od; ztest_od_init(&od, 0, FTAG, 0, DMU_OT_UINT64_OTHER, 0, 0, 0); VERIFY0(ztest_object_init(zd, &od, sizeof (od), B_FALSE)); ztest_io(zd, od.od_object, ztest_random(ZTEST_RANGE_LOCKS) << SPA_MAXBLOCKSHIFT); txg_wait_synced(spa_get_dsl(spa), 0); } /* * Commit all of the changes we just generated. */ zil_commit(zd->zd_zilog, 0); txg_wait_synced(spa_get_dsl(spa), 0); /* * Close our dataset and close the pool. */ ztest_dataset_close(0); spa_close(spa, FTAG); kernel_fini(); /* * Open and close the pool and dataset to induce log replay. */ raidz_scratch_verify(); kernel_init(SPA_MODE_READ | SPA_MODE_WRITE); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); ASSERT3U(spa_freeze_txg(spa), ==, UINT64_MAX); VERIFY0(ztest_dataset_open(0)); ztest_spa = spa; txg_wait_synced(spa_get_dsl(spa), 0); ztest_dataset_close(0); ztest_reguid(NULL, 0); spa_close(spa, FTAG); kernel_fini(); } static void ztest_import_impl(void) { importargs_t args = { 0 }; nvlist_t *cfg = NULL; int nsearch = 1; char *searchdirs[nsearch]; int flags = ZFS_IMPORT_MISSING_LOG; searchdirs[0] = ztest_opts.zo_dir; args.paths = nsearch; args.path = searchdirs; args.can_be_active = B_FALSE; libpc_handle_t lpch = { .lpc_lib_handle = NULL, .lpc_ops = &libzpool_config_ops, .lpc_printerr = B_TRUE }; VERIFY0(zpool_find_config(&lpch, ztest_opts.zo_pool, &cfg, &args)); VERIFY0(spa_import(ztest_opts.zo_pool, cfg, NULL, flags)); fnvlist_free(cfg); } /* * Import a storage pool with the given name. */ static void ztest_import(ztest_shared_t *zs) { spa_t *spa; mutex_init(&ztest_vdev_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&ztest_checkpoint_lock, NULL, MUTEX_DEFAULT, NULL); VERIFY0(pthread_rwlock_init(&ztest_name_lock, NULL)); raidz_scratch_verify(); kernel_init(SPA_MODE_READ | SPA_MODE_WRITE); ztest_import_impl(); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); zs->zs_metaslab_sz = 1ULL << spa->spa_root_vdev->vdev_child[0]->vdev_ms_shift; zs->zs_guid = spa_guid(spa); spa_close(spa, FTAG); kernel_fini(); if (!ztest_opts.zo_mmp_test) { ztest_run_zdb(zs->zs_guid); ztest_freeze(); ztest_run_zdb(zs->zs_guid); } (void) pthread_rwlock_destroy(&ztest_name_lock); mutex_destroy(&ztest_vdev_lock); mutex_destroy(&ztest_checkpoint_lock); } /* * After the expansion was killed, check that the pool is healthy */ static void ztest_raidz_expand_check(spa_t *spa) { ASSERT3U(ztest_opts.zo_raidz_expand_test, ==, RAIDZ_EXPAND_KILLED); /* * Set pool check done flag, main program will run a zdb check * of the pool when we exit. */ ztest_shared_opts->zo_raidz_expand_test = RAIDZ_EXPAND_CHECKED; /* Wait for reflow to finish */ if (ztest_opts.zo_verbose >= 1) { (void) printf("\nwaiting for reflow to finish ...\n"); } pool_raidz_expand_stat_t rzx_stats; pool_raidz_expand_stat_t *pres = &rzx_stats; do { txg_wait_synced(spa_get_dsl(spa), 0); (void) poll(NULL, 0, 500); /* wait 1/2 second */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); (void) spa_raidz_expand_get_stats(spa, pres); spa_config_exit(spa, SCL_CONFIG, FTAG); } while (pres->pres_state != DSS_FINISHED && pres->pres_reflowed < pres->pres_to_reflow); if (ztest_opts.zo_verbose >= 1) { (void) printf("verifying an interrupted raidz " "expansion using a pool scrub ...\n"); } /* Will fail here if there is non-recoverable corruption detected */ VERIFY0(ztest_scrub_impl(spa)); if (ztest_opts.zo_verbose >= 1) { (void) printf("raidz expansion scrub check complete\n"); } } /* * Start a raidz expansion test. We run some I/O on the pool for a while * to get some data in the pool. Then we grow the raidz and * kill the test at the requested offset into the reflow, verifying that * doing such does not lead to pool corruption. */ static void ztest_raidz_expand_run(ztest_shared_t *zs, spa_t *spa) { nvlist_t *root; pool_raidz_expand_stat_t rzx_stats; pool_raidz_expand_stat_t *pres = &rzx_stats; kthread_t **run_threads; vdev_t *cvd, *rzvd = spa->spa_root_vdev->vdev_child[0]; int total_disks = rzvd->vdev_children; int data_disks = total_disks - vdev_get_nparity(rzvd); uint64_t alloc_goal; uint64_t csize; int error, t; int threads = ztest_opts.zo_threads; ztest_expand_io_t *thread_args; ASSERT3U(ztest_opts.zo_raidz_expand_test, !=, RAIDZ_EXPAND_NONE); ASSERT3P(rzvd->vdev_ops, ==, &vdev_raidz_ops); ztest_opts.zo_raidz_expand_test = RAIDZ_EXPAND_STARTED; /* Setup a 1 MiB buffer of random data */ uint64_t bufsize = 1024 * 1024; void *buffer = umem_alloc(bufsize, UMEM_NOFAIL); if (read(ztest_fd_rand, buffer, bufsize) != bufsize) { fatal(B_TRUE, "short read from /dev/urandom"); } /* * Put some data in the pool and then attach a vdev to initiate * reflow. */ run_threads = umem_zalloc(threads * sizeof (kthread_t *), UMEM_NOFAIL); thread_args = umem_zalloc(threads * sizeof (ztest_expand_io_t), UMEM_NOFAIL); /* Aim for roughly 25% of allocatable space up to 1GB */ alloc_goal = (vdev_get_min_asize(rzvd) * data_disks) / total_disks; alloc_goal = MIN(alloc_goal >> 2, 1024*1024*1024); if (ztest_opts.zo_verbose >= 1) { (void) printf("adding data to pool '%s', goal %llu bytes\n", ztest_opts.zo_pool, (u_longlong_t)alloc_goal); } /* * Kick off all the I/O generators that run in parallel. */ for (t = 0; t < threads; t++) { if (t < ztest_opts.zo_datasets && ztest_dataset_open(t) != 0) { umem_free(run_threads, threads * sizeof (kthread_t *)); umem_free(buffer, bufsize); return; } thread_args[t].rzx_id = t; thread_args[t].rzx_amount = alloc_goal / threads; thread_args[t].rzx_bufsize = bufsize; thread_args[t].rzx_buffer = buffer; thread_args[t].rzx_alloc_max = alloc_goal; thread_args[t].rzx_spa = spa; run_threads[t] = thread_create(NULL, 0, ztest_rzx_thread, &thread_args[t], 0, NULL, TS_RUN | TS_JOINABLE, defclsyspri); } /* * Wait for all of the writers to complete. */ for (t = 0; t < threads; t++) VERIFY0(thread_join(run_threads[t])); /* * Close all datasets. This must be done after all the threads * are joined so we can be sure none of the datasets are in-use * by any of the threads. */ for (t = 0; t < ztest_opts.zo_threads; t++) { if (t < ztest_opts.zo_datasets) ztest_dataset_close(t); } txg_wait_synced(spa_get_dsl(spa), 0); zs->zs_alloc = metaslab_class_get_alloc(spa_normal_class(spa)); zs->zs_space = metaslab_class_get_space(spa_normal_class(spa)); umem_free(buffer, bufsize); umem_free(run_threads, threads * sizeof (kthread_t *)); umem_free(thread_args, threads * sizeof (ztest_expand_io_t)); /* Set our reflow target to 25%, 50% or 75% of allocated size */ uint_t multiple = ztest_random(3) + 1; uint64_t reflow_max = (rzvd->vdev_stat.vs_alloc * multiple) / 4; raidz_expand_max_reflow_bytes = reflow_max; if (ztest_opts.zo_verbose >= 1) { (void) printf("running raidz expansion test, killing when " "reflow reaches %llu bytes (%u/4 of allocated space)\n", (u_longlong_t)reflow_max, multiple); } /* XXX - do we want some I/O load during the reflow? */ /* * Use a disk size that is larger than existing ones */ cvd = rzvd->vdev_child[0]; csize = vdev_get_min_asize(cvd); csize += csize / 10; /* * Path to vdev to be attached */ char *newpath = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); (void) snprintf(newpath, MAXPATHLEN, ztest_dev_template, ztest_opts.zo_dir, ztest_opts.zo_pool, rzvd->vdev_children); /* * Build the nvlist describing newpath. */ root = make_vdev_root(newpath, NULL, NULL, csize, ztest_get_ashift(), NULL, 0, 0, 1); /* * Expand the raidz vdev by attaching the new disk */ if (ztest_opts.zo_verbose >= 1) { (void) printf("expanding raidz: %d wide to %d wide with '%s'\n", (int)rzvd->vdev_children, (int)rzvd->vdev_children + 1, newpath); } error = spa_vdev_attach(spa, rzvd->vdev_guid, root, B_FALSE, B_FALSE); nvlist_free(root); if (error != 0) { fatal(0, "raidz expand: attach (%s %llu) returned %d", newpath, (long long)csize, error); } /* * Wait for reflow to begin */ while (spa->spa_raidz_expand == NULL) { txg_wait_synced(spa_get_dsl(spa), 0); (void) poll(NULL, 0, 100); /* wait 1/10 second */ } spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); (void) spa_raidz_expand_get_stats(spa, pres); spa_config_exit(spa, SCL_CONFIG, FTAG); while (pres->pres_state != DSS_SCANNING) { txg_wait_synced(spa_get_dsl(spa), 0); (void) poll(NULL, 0, 100); /* wait 1/10 second */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); (void) spa_raidz_expand_get_stats(spa, pres); spa_config_exit(spa, SCL_CONFIG, FTAG); } ASSERT3U(pres->pres_state, ==, DSS_SCANNING); ASSERT3U(pres->pres_to_reflow, !=, 0); /* * Set so when we are killed we go to raidz checking rather than * restarting test. */ ztest_shared_opts->zo_raidz_expand_test = RAIDZ_EXPAND_KILLED; if (ztest_opts.zo_verbose >= 1) { (void) printf("raidz expansion reflow started, waiting for " "%llu bytes to be copied\n", (u_longlong_t)reflow_max); } /* * Wait for reflow maximum to be reached and then kill the test */ while (pres->pres_reflowed < reflow_max) { txg_wait_synced(spa_get_dsl(spa), 0); (void) poll(NULL, 0, 100); /* wait 1/10 second */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); (void) spa_raidz_expand_get_stats(spa, pres); spa_config_exit(spa, SCL_CONFIG, FTAG); } /* Reset the reflow pause before killing */ raidz_expand_max_reflow_bytes = 0; if (ztest_opts.zo_verbose >= 1) { (void) printf("killing raidz expansion test after reflow " "reached %llu bytes\n", (u_longlong_t)pres->pres_reflowed); } /* * Kill ourself to simulate a panic during a reflow. Our parent will * restart the test and the changed flag value will drive the test * through the scrub/check code to verify the pool is not corrupted. */ ztest_kill(zs); } static void ztest_generic_run(ztest_shared_t *zs, spa_t *spa) { kthread_t **run_threads; int t; run_threads = umem_zalloc(ztest_opts.zo_threads * sizeof (kthread_t *), UMEM_NOFAIL); /* * Kick off all the tests that run in parallel. */ for (t = 0; t < ztest_opts.zo_threads; t++) { if (t < ztest_opts.zo_datasets && ztest_dataset_open(t) != 0) { umem_free(run_threads, ztest_opts.zo_threads * sizeof (kthread_t *)); return; } run_threads[t] = thread_create(NULL, 0, ztest_thread, (void *)(uintptr_t)t, 0, NULL, TS_RUN | TS_JOINABLE, defclsyspri); } /* * Wait for all of the tests to complete. */ for (t = 0; t < ztest_opts.zo_threads; t++) VERIFY0(thread_join(run_threads[t])); /* * Close all datasets. This must be done after all the threads * are joined so we can be sure none of the datasets are in-use * by any of the threads. */ for (t = 0; t < ztest_opts.zo_threads; t++) { if (t < ztest_opts.zo_datasets) ztest_dataset_close(t); } txg_wait_synced(spa_get_dsl(spa), 0); zs->zs_alloc = metaslab_class_get_alloc(spa_normal_class(spa)); zs->zs_space = metaslab_class_get_space(spa_normal_class(spa)); umem_free(run_threads, ztest_opts.zo_threads * sizeof (kthread_t *)); } /* * Setup our test context and kick off threads to run tests on all datasets * in parallel. */ static void ztest_run(ztest_shared_t *zs) { spa_t *spa; objset_t *os; kthread_t *resume_thread, *deadman_thread; uint64_t object; int error; int t, d; ztest_exiting = B_FALSE; /* * Initialize parent/child shared state. */ mutex_init(&ztest_vdev_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&ztest_checkpoint_lock, NULL, MUTEX_DEFAULT, NULL); VERIFY0(pthread_rwlock_init(&ztest_name_lock, NULL)); zs->zs_thread_start = gethrtime(); zs->zs_thread_stop = zs->zs_thread_start + ztest_opts.zo_passtime * NANOSEC; zs->zs_thread_stop = MIN(zs->zs_thread_stop, zs->zs_proc_stop); zs->zs_thread_kill = zs->zs_thread_stop; if (ztest_random(100) < ztest_opts.zo_killrate) { zs->zs_thread_kill -= ztest_random(ztest_opts.zo_passtime * NANOSEC); } mutex_init(&zcl.zcl_callbacks_lock, NULL, MUTEX_DEFAULT, NULL); list_create(&zcl.zcl_callbacks, sizeof (ztest_cb_data_t), offsetof(ztest_cb_data_t, zcd_node)); /* * Open our pool. It may need to be imported first depending on * what tests were running when the previous pass was terminated. */ raidz_scratch_verify(); kernel_init(SPA_MODE_READ | SPA_MODE_WRITE); error = spa_open(ztest_opts.zo_pool, &spa, FTAG); if (error) { VERIFY3S(error, ==, ENOENT); ztest_import_impl(); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); zs->zs_metaslab_sz = 1ULL << spa->spa_root_vdev->vdev_child[0]->vdev_ms_shift; } metaslab_preload_limit = ztest_random(20) + 1; ztest_spa = spa; /* * XXX - BUGBUG raidz expansion do not run this for generic for now */ if (ztest_opts.zo_raidz_expand_test != RAIDZ_EXPAND_NONE) VERIFY0(vdev_raidz_impl_set("cycle")); dmu_objset_stats_t dds; VERIFY0(ztest_dmu_objset_own(ztest_opts.zo_pool, DMU_OST_ANY, B_TRUE, B_TRUE, FTAG, &os)); dsl_pool_config_enter(dmu_objset_pool(os), FTAG); dmu_objset_fast_stat(os, &dds); dsl_pool_config_exit(dmu_objset_pool(os), FTAG); dmu_objset_disown(os, B_TRUE, FTAG); /* Give the dedicated raidz expansion test more grace time */ if (ztest_opts.zo_raidz_expand_test != RAIDZ_EXPAND_NONE) zfs_deadman_synctime_ms *= 2; /* * Create a thread to periodically resume suspended I/O. */ resume_thread = thread_create(NULL, 0, ztest_resume_thread, spa, 0, NULL, TS_RUN | TS_JOINABLE, defclsyspri); /* * Create a deadman thread and set to panic if we hang. */ deadman_thread = thread_create(NULL, 0, ztest_deadman_thread, zs, 0, NULL, TS_RUN | TS_JOINABLE, defclsyspri); spa->spa_deadman_failmode = ZIO_FAILURE_MODE_PANIC; /* * Verify that we can safely inquire about any object, * whether it's allocated or not. To make it interesting, * we probe a 5-wide window around each power of two. * This hits all edge cases, including zero and the max. */ for (t = 0; t < 64; t++) { for (d = -5; d <= 5; d++) { error = dmu_object_info(spa->spa_meta_objset, (1ULL << t) + d, NULL); ASSERT(error == 0 || error == ENOENT || error == EINVAL); } } /* * If we got any ENOSPC errors on the previous run, destroy something. */ if (zs->zs_enospc_count != 0) { /* Not expecting ENOSPC errors during raidz expansion tests */ ASSERT3U(ztest_opts.zo_raidz_expand_test, ==, RAIDZ_EXPAND_NONE); int d = ztest_random(ztest_opts.zo_datasets); ztest_dataset_destroy(d); } zs->zs_enospc_count = 0; /* * If we were in the middle of ztest_device_removal() and were killed * we need to ensure the removal and scrub complete before running * any tests that check ztest_device_removal_active. The removal will * be restarted automatically when the spa is opened, but we need to * initiate the scrub manually if it is not already in progress. Note * that we always run the scrub whenever an indirect vdev exists * because we have no way of knowing for sure if ztest_device_removal() * fully completed its scrub before the pool was reimported. * * Does not apply for the RAIDZ expansion specific test runs */ if (ztest_opts.zo_raidz_expand_test == RAIDZ_EXPAND_NONE && (spa->spa_removing_phys.sr_state == DSS_SCANNING || spa->spa_removing_phys.sr_prev_indirect_vdev != -1)) { while (spa->spa_removing_phys.sr_state == DSS_SCANNING) txg_wait_synced(spa_get_dsl(spa), 0); error = ztest_scrub_impl(spa); if (error == EBUSY) error = 0; ASSERT0(error); } if (ztest_opts.zo_verbose >= 4) (void) printf("starting main threads...\n"); /* * Replay all logs of all datasets in the pool. This is primarily for * temporary datasets which wouldn't otherwise get replayed, which * can trigger failures when attempting to offline a SLOG in * ztest_fault_inject(). */ (void) dmu_objset_find(ztest_opts.zo_pool, ztest_replay_zil_cb, NULL, DS_FIND_CHILDREN); if (ztest_opts.zo_raidz_expand_test == RAIDZ_EXPAND_REQUESTED) ztest_raidz_expand_run(zs, spa); else if (ztest_opts.zo_raidz_expand_test == RAIDZ_EXPAND_KILLED) ztest_raidz_expand_check(spa); else ztest_generic_run(zs, spa); /* Kill the resume and deadman threads */ ztest_exiting = B_TRUE; VERIFY0(thread_join(resume_thread)); VERIFY0(thread_join(deadman_thread)); ztest_resume(spa); /* * Right before closing the pool, kick off a bunch of async I/O; * spa_close() should wait for it to complete. */ for (object = 1; object < 50; object++) { dmu_prefetch(spa->spa_meta_objset, object, 0, 0, 1ULL << 20, ZIO_PRIORITY_SYNC_READ); } /* Verify that at least one commit cb was called in a timely fashion */ if (zc_cb_counter >= ZTEST_COMMIT_CB_MIN_REG) VERIFY0(zc_min_txg_delay); spa_close(spa, FTAG); /* * Verify that we can loop over all pools. */ mutex_enter(&spa_namespace_lock); for (spa = spa_next(NULL); spa != NULL; spa = spa_next(spa)) if (ztest_opts.zo_verbose > 3) (void) printf("spa_next: found %s\n", spa_name(spa)); mutex_exit(&spa_namespace_lock); /* * Verify that we can export the pool and reimport it under a * different name. */ if ((ztest_random(2) == 0) && !ztest_opts.zo_mmp_test) { char name[ZFS_MAX_DATASET_NAME_LEN]; (void) snprintf(name, sizeof (name), "%s_import", ztest_opts.zo_pool); ztest_spa_import_export(ztest_opts.zo_pool, name); ztest_spa_import_export(name, ztest_opts.zo_pool); } kernel_fini(); list_destroy(&zcl.zcl_callbacks); mutex_destroy(&zcl.zcl_callbacks_lock); (void) pthread_rwlock_destroy(&ztest_name_lock); mutex_destroy(&ztest_vdev_lock); mutex_destroy(&ztest_checkpoint_lock); } static void print_time(hrtime_t t, char *timebuf) { hrtime_t s = t / NANOSEC; hrtime_t m = s / 60; hrtime_t h = m / 60; hrtime_t d = h / 24; s -= m * 60; m -= h * 60; h -= d * 24; timebuf[0] = '\0'; if (d) (void) sprintf(timebuf, "%llud%02lluh%02llum%02llus", d, h, m, s); else if (h) (void) sprintf(timebuf, "%lluh%02llum%02llus", h, m, s); else if (m) (void) sprintf(timebuf, "%llum%02llus", m, s); else (void) sprintf(timebuf, "%llus", s); } static nvlist_t * -make_random_props(void) +make_random_pool_props(void) { nvlist_t *props; props = fnvlist_alloc(); - if (ztest_random(2) == 0) - return (props); + /* Twenty percent of the time enable ZPOOL_PROP_DEDUP_TABLE_QUOTA */ + if (ztest_random(5) == 0) { + fnvlist_add_uint64(props, + zpool_prop_to_name(ZPOOL_PROP_DEDUP_TABLE_QUOTA), + 2 * 1024 * 1024); + } - fnvlist_add_uint64(props, - zpool_prop_to_name(ZPOOL_PROP_AUTOREPLACE), 1); + /* Fifty percent of the time enable ZPOOL_PROP_AUTOREPLACE */ + if (ztest_random(2) == 0) { + fnvlist_add_uint64(props, + zpool_prop_to_name(ZPOOL_PROP_AUTOREPLACE), 1); + } return (props); } /* * Create a storage pool with the given name and initial vdev size. * Then test spa_freeze() functionality. */ static void ztest_init(ztest_shared_t *zs) { spa_t *spa; nvlist_t *nvroot, *props; int i; mutex_init(&ztest_vdev_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&ztest_checkpoint_lock, NULL, MUTEX_DEFAULT, NULL); VERIFY0(pthread_rwlock_init(&ztest_name_lock, NULL)); raidz_scratch_verify(); kernel_init(SPA_MODE_READ | SPA_MODE_WRITE); /* * Create the storage pool. */ (void) spa_destroy(ztest_opts.zo_pool); ztest_shared->zs_vdev_next_leaf = 0; zs->zs_splits = 0; zs->zs_mirrors = ztest_opts.zo_mirrors; nvroot = make_vdev_root(NULL, NULL, NULL, ztest_opts.zo_vdev_size, 0, NULL, ztest_opts.zo_raid_children, zs->zs_mirrors, 1); - props = make_random_props(); + props = make_random_pool_props(); /* * We don't expect the pool to suspend unless maxfaults == 0, * in which case ztest_fault_inject() temporarily takes away * the only valid replica. */ fnvlist_add_uint64(props, zpool_prop_to_name(ZPOOL_PROP_FAILUREMODE), MAXFAULTS(zs) ? ZIO_FAILURE_MODE_PANIC : ZIO_FAILURE_MODE_WAIT); for (i = 0; i < SPA_FEATURES; i++) { char *buf; if (!spa_feature_table[i].fi_zfs_mod_supported) continue; /* * 75% chance of using the log space map feature. We want ztest * to exercise both the code paths that use the log space map * feature and the ones that don't. */ if (i == SPA_FEATURE_LOG_SPACEMAP && ztest_random(4) == 0) continue; VERIFY3S(-1, !=, asprintf(&buf, "feature@%s", spa_feature_table[i].fi_uname)); fnvlist_add_uint64(props, buf, 0); free(buf); } VERIFY0(spa_create(ztest_opts.zo_pool, nvroot, props, NULL, NULL)); fnvlist_free(nvroot); fnvlist_free(props); VERIFY0(spa_open(ztest_opts.zo_pool, &spa, FTAG)); zs->zs_metaslab_sz = 1ULL << spa->spa_root_vdev->vdev_child[0]->vdev_ms_shift; zs->zs_guid = spa_guid(spa); spa_close(spa, FTAG); kernel_fini(); if (!ztest_opts.zo_mmp_test) { ztest_run_zdb(zs->zs_guid); ztest_freeze(); ztest_run_zdb(zs->zs_guid); } (void) pthread_rwlock_destroy(&ztest_name_lock); mutex_destroy(&ztest_vdev_lock); mutex_destroy(&ztest_checkpoint_lock); } static void setup_data_fd(void) { static char ztest_name_data[] = "/tmp/ztest.data.XXXXXX"; ztest_fd_data = mkstemp(ztest_name_data); ASSERT3S(ztest_fd_data, >=, 0); (void) unlink(ztest_name_data); } static int shared_data_size(ztest_shared_hdr_t *hdr) { int size; size = hdr->zh_hdr_size; size += hdr->zh_opts_size; size += hdr->zh_size; size += hdr->zh_stats_size * hdr->zh_stats_count; size += hdr->zh_ds_size * hdr->zh_ds_count; size += hdr->zh_scratch_state_size; return (size); } static void setup_hdr(void) { int size; ztest_shared_hdr_t *hdr; hdr = (void *)mmap(0, P2ROUNDUP(sizeof (*hdr), getpagesize()), PROT_READ | PROT_WRITE, MAP_SHARED, ztest_fd_data, 0); ASSERT3P(hdr, !=, MAP_FAILED); VERIFY0(ftruncate(ztest_fd_data, sizeof (ztest_shared_hdr_t))); hdr->zh_hdr_size = sizeof (ztest_shared_hdr_t); hdr->zh_opts_size = sizeof (ztest_shared_opts_t); hdr->zh_size = sizeof (ztest_shared_t); hdr->zh_stats_size = sizeof (ztest_shared_callstate_t); hdr->zh_stats_count = ZTEST_FUNCS; hdr->zh_ds_size = sizeof (ztest_shared_ds_t); hdr->zh_ds_count = ztest_opts.zo_datasets; hdr->zh_scratch_state_size = sizeof (ztest_shared_scratch_state_t); size = shared_data_size(hdr); VERIFY0(ftruncate(ztest_fd_data, size)); (void) munmap((caddr_t)hdr, P2ROUNDUP(sizeof (*hdr), getpagesize())); } static void setup_data(void) { int size, offset; ztest_shared_hdr_t *hdr; uint8_t *buf; hdr = (void *)mmap(0, P2ROUNDUP(sizeof (*hdr), getpagesize()), PROT_READ, MAP_SHARED, ztest_fd_data, 0); ASSERT3P(hdr, !=, MAP_FAILED); size = shared_data_size(hdr); (void) munmap((caddr_t)hdr, P2ROUNDUP(sizeof (*hdr), getpagesize())); hdr = ztest_shared_hdr = (void *)mmap(0, P2ROUNDUP(size, getpagesize()), PROT_READ | PROT_WRITE, MAP_SHARED, ztest_fd_data, 0); ASSERT3P(hdr, !=, MAP_FAILED); buf = (uint8_t *)hdr; offset = hdr->zh_hdr_size; ztest_shared_opts = (void *)&buf[offset]; offset += hdr->zh_opts_size; ztest_shared = (void *)&buf[offset]; offset += hdr->zh_size; ztest_shared_callstate = (void *)&buf[offset]; offset += hdr->zh_stats_size * hdr->zh_stats_count; ztest_shared_ds = (void *)&buf[offset]; offset += hdr->zh_ds_size * hdr->zh_ds_count; ztest_scratch_state = (void *)&buf[offset]; } static boolean_t exec_child(char *cmd, char *libpath, boolean_t ignorekill, int *statusp) { pid_t pid; int status; char *cmdbuf = NULL; pid = fork(); if (cmd == NULL) { cmdbuf = umem_alloc(MAXPATHLEN, UMEM_NOFAIL); (void) strlcpy(cmdbuf, getexecname(), MAXPATHLEN); cmd = cmdbuf; } if (pid == -1) fatal(B_TRUE, "fork failed"); if (pid == 0) { /* child */ char fd_data_str[12]; VERIFY3S(11, >=, snprintf(fd_data_str, 12, "%d", ztest_fd_data)); VERIFY0(setenv("ZTEST_FD_DATA", fd_data_str, 1)); if (libpath != NULL) { const char *curlp = getenv("LD_LIBRARY_PATH"); if (curlp == NULL) VERIFY0(setenv("LD_LIBRARY_PATH", libpath, 1)); else { char *newlp = NULL; VERIFY3S(-1, !=, asprintf(&newlp, "%s:%s", libpath, curlp)); VERIFY0(setenv("LD_LIBRARY_PATH", newlp, 1)); free(newlp); } } (void) execl(cmd, cmd, (char *)NULL); ztest_dump_core = B_FALSE; fatal(B_TRUE, "exec failed: %s", cmd); } if (cmdbuf != NULL) { umem_free(cmdbuf, MAXPATHLEN); cmd = NULL; } while (waitpid(pid, &status, 0) != pid) continue; if (statusp != NULL) *statusp = status; if (WIFEXITED(status)) { if (WEXITSTATUS(status) != 0) { (void) fprintf(stderr, "child exited with code %d\n", WEXITSTATUS(status)); exit(2); } return (B_FALSE); } else if (WIFSIGNALED(status)) { if (!ignorekill || WTERMSIG(status) != SIGKILL) { (void) fprintf(stderr, "child died with signal %d\n", WTERMSIG(status)); exit(3); } return (B_TRUE); } else { (void) fprintf(stderr, "something strange happened to child\n"); exit(4); } } static void ztest_run_init(void) { int i; ztest_shared_t *zs = ztest_shared; /* * Blow away any existing copy of zpool.cache */ (void) remove(spa_config_path); if (ztest_opts.zo_init == 0) { if (ztest_opts.zo_verbose >= 1) (void) printf("Importing pool %s\n", ztest_opts.zo_pool); ztest_import(zs); return; } /* * Create and initialize our storage pool. */ for (i = 1; i <= ztest_opts.zo_init; i++) { memset(zs, 0, sizeof (*zs)); if (ztest_opts.zo_verbose >= 3 && ztest_opts.zo_init != 1) { (void) printf("ztest_init(), pass %d\n", i); } ztest_init(zs); } } int main(int argc, char **argv) { int kills = 0; int iters = 0; int older = 0; int newer = 0; ztest_shared_t *zs; ztest_info_t *zi; ztest_shared_callstate_t *zc; char timebuf[100]; char numbuf[NN_NUMBUF_SZ]; char *cmd; boolean_t hasalt; int f, err; char *fd_data_str = getenv("ZTEST_FD_DATA"); struct sigaction action; (void) setvbuf(stdout, NULL, _IOLBF, 0); dprintf_setup(&argc, argv); zfs_deadman_synctime_ms = 300000; zfs_deadman_checktime_ms = 30000; /* * As two-word space map entries may not come up often (especially * if pool and vdev sizes are small) we want to force at least some * of them so the feature get tested. */ zfs_force_some_double_word_sm_entries = B_TRUE; /* * Verify that even extensively damaged split blocks with many * segments can be reconstructed in a reasonable amount of time * when reconstruction is known to be possible. * * Note: the lower this value is, the more damage we inflict, and * the more time ztest spends in recovering that damage. We chose * to induce damage 1/100th of the time so recovery is tested but * not so frequently that ztest doesn't get to test other code paths. */ zfs_reconstruct_indirect_damage_fraction = 100; action.sa_handler = sig_handler; sigemptyset(&action.sa_mask); action.sa_flags = 0; if (sigaction(SIGSEGV, &action, NULL) < 0) { (void) fprintf(stderr, "ztest: cannot catch SIGSEGV: %s.\n", strerror(errno)); exit(EXIT_FAILURE); } if (sigaction(SIGABRT, &action, NULL) < 0) { (void) fprintf(stderr, "ztest: cannot catch SIGABRT: %s.\n", strerror(errno)); exit(EXIT_FAILURE); } /* * Force random_get_bytes() to use /dev/urandom in order to prevent * ztest from needlessly depleting the system entropy pool. */ random_path = "/dev/urandom"; ztest_fd_rand = open(random_path, O_RDONLY | O_CLOEXEC); ASSERT3S(ztest_fd_rand, >=, 0); if (!fd_data_str) { process_options(argc, argv); setup_data_fd(); setup_hdr(); setup_data(); memcpy(ztest_shared_opts, &ztest_opts, sizeof (*ztest_shared_opts)); } else { ztest_fd_data = atoi(fd_data_str); setup_data(); memcpy(&ztest_opts, ztest_shared_opts, sizeof (ztest_opts)); } ASSERT3U(ztest_opts.zo_datasets, ==, ztest_shared_hdr->zh_ds_count); err = ztest_set_global_vars(); if (err != 0 && !fd_data_str) { /* error message done by ztest_set_global_vars */ exit(EXIT_FAILURE); } else { /* children should not be spawned if setting gvars fails */ VERIFY3S(err, ==, 0); } /* Override location of zpool.cache */ VERIFY3S(asprintf((char **)&spa_config_path, "%s/zpool.cache", ztest_opts.zo_dir), !=, -1); ztest_ds = umem_alloc(ztest_opts.zo_datasets * sizeof (ztest_ds_t), UMEM_NOFAIL); zs = ztest_shared; if (fd_data_str) { metaslab_force_ganging = ztest_opts.zo_metaslab_force_ganging; metaslab_df_alloc_threshold = zs->zs_metaslab_df_alloc_threshold; if (zs->zs_do_init) ztest_run_init(); else ztest_run(zs); exit(0); } hasalt = (strlen(ztest_opts.zo_alt_ztest) != 0); if (ztest_opts.zo_verbose >= 1) { (void) printf("%"PRIu64" vdevs, %d datasets, %d threads, " "%d %s disks, parity %d, %"PRIu64" seconds...\n\n", ztest_opts.zo_vdevs, ztest_opts.zo_datasets, ztest_opts.zo_threads, ztest_opts.zo_raid_children, ztest_opts.zo_raid_type, ztest_opts.zo_raid_parity, ztest_opts.zo_time); } cmd = umem_alloc(MAXNAMELEN, UMEM_NOFAIL); (void) strlcpy(cmd, getexecname(), MAXNAMELEN); zs->zs_do_init = B_TRUE; if (strlen(ztest_opts.zo_alt_ztest) != 0) { if (ztest_opts.zo_verbose >= 1) { (void) printf("Executing older ztest for " "initialization: %s\n", ztest_opts.zo_alt_ztest); } VERIFY(!exec_child(ztest_opts.zo_alt_ztest, ztest_opts.zo_alt_libpath, B_FALSE, NULL)); } else { VERIFY(!exec_child(NULL, NULL, B_FALSE, NULL)); } zs->zs_do_init = B_FALSE; zs->zs_proc_start = gethrtime(); zs->zs_proc_stop = zs->zs_proc_start + ztest_opts.zo_time * NANOSEC; for (f = 0; f < ZTEST_FUNCS; f++) { zi = &ztest_info[f]; zc = ZTEST_GET_SHARED_CALLSTATE(f); if (zs->zs_proc_start + zi->zi_interval[0] > zs->zs_proc_stop) zc->zc_next = UINT64_MAX; else zc->zc_next = zs->zs_proc_start + ztest_random(2 * zi->zi_interval[0] + 1); } /* * Run the tests in a loop. These tests include fault injection * to verify that self-healing data works, and forced crashes * to verify that we never lose on-disk consistency. */ while (gethrtime() < zs->zs_proc_stop) { int status; boolean_t killed; /* * Initialize the workload counters for each function. */ for (f = 0; f < ZTEST_FUNCS; f++) { zc = ZTEST_GET_SHARED_CALLSTATE(f); zc->zc_count = 0; zc->zc_time = 0; } /* Set the allocation switch size */ zs->zs_metaslab_df_alloc_threshold = ztest_random(zs->zs_metaslab_sz / 4) + 1; if (!hasalt || ztest_random(2) == 0) { if (hasalt && ztest_opts.zo_verbose >= 1) { (void) printf("Executing newer ztest: %s\n", cmd); } newer++; killed = exec_child(cmd, NULL, B_TRUE, &status); } else { if (hasalt && ztest_opts.zo_verbose >= 1) { (void) printf("Executing older ztest: %s\n", ztest_opts.zo_alt_ztest); } older++; killed = exec_child(ztest_opts.zo_alt_ztest, ztest_opts.zo_alt_libpath, B_TRUE, &status); } if (killed) kills++; iters++; if (ztest_opts.zo_verbose >= 1) { hrtime_t now = gethrtime(); now = MIN(now, zs->zs_proc_stop); print_time(zs->zs_proc_stop - now, timebuf); nicenum(zs->zs_space, numbuf, sizeof (numbuf)); (void) printf("Pass %3d, %8s, %3"PRIu64" ENOSPC, " "%4.1f%% of %5s used, %3.0f%% done, %8s to go\n", iters, WIFEXITED(status) ? "Complete" : "SIGKILL", zs->zs_enospc_count, 100.0 * zs->zs_alloc / zs->zs_space, numbuf, 100.0 * (now - zs->zs_proc_start) / (ztest_opts.zo_time * NANOSEC), timebuf); } if (ztest_opts.zo_verbose >= 2) { (void) printf("\nWorkload summary:\n\n"); (void) printf("%7s %9s %s\n", "Calls", "Time", "Function"); (void) printf("%7s %9s %s\n", "-----", "----", "--------"); for (f = 0; f < ZTEST_FUNCS; f++) { zi = &ztest_info[f]; zc = ZTEST_GET_SHARED_CALLSTATE(f); print_time(zc->zc_time, timebuf); (void) printf("%7"PRIu64" %9s %s\n", zc->zc_count, timebuf, zi->zi_funcname); } (void) printf("\n"); } if (!ztest_opts.zo_mmp_test) ztest_run_zdb(zs->zs_guid); if (ztest_shared_opts->zo_raidz_expand_test == RAIDZ_EXPAND_CHECKED) break; /* raidz expand test complete */ } if (ztest_opts.zo_verbose >= 1) { if (hasalt) { (void) printf("%d runs of older ztest: %s\n", older, ztest_opts.zo_alt_ztest); (void) printf("%d runs of newer ztest: %s\n", newer, cmd); } (void) printf("%d killed, %d completed, %.0f%% kill rate\n", kills, iters - kills, (100.0 * kills) / MAX(1, iters)); } umem_free(cmd, MAXNAMELEN); return (0); } diff --git a/include/sys/ddt.h b/include/sys/ddt.h index 726f1a3902eb..e0129eda5cf5 100644 --- a/include/sys/ddt.h +++ b/include/sys/ddt.h @@ -1,266 +1,269 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2016 by Delphix. All rights reserved. * Copyright (c) 2023, Klara Inc. */ #ifndef _SYS_DDT_H #define _SYS_DDT_H #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif struct abd; /* * DDT on-disk storage object types. Each one corresponds to specific * implementation, see ddt_ops_t. The value itself is not stored on disk. * * When searching for an entry, objects types will be searched in this order. * * Note that DDT_TYPES is used as the "no type" for new entries that have not * yet been written to a storage object. */ typedef enum { DDT_TYPE_ZAP = 0, /* ZAP storage object, ddt_zap */ DDT_TYPES } ddt_type_t; _Static_assert(DDT_TYPES <= UINT8_MAX, "ddt_type_t must fit in a uint8_t"); /* New and updated entries recieve this type, see ddt_sync_entry() */ #define DDT_TYPE_DEFAULT (DDT_TYPE_ZAP) /* * DDT storage classes. Each class has a separate storage object for each type. * The value itself is not stored on disk. * * When search for an entry, object classes will be searched in this order. * * Note that DDT_CLASSES is used as the "no class" for new entries that have not * yet been written to a storage object. */ typedef enum { DDT_CLASS_DITTO = 0, /* entry has ditto blocks (obsolete) */ DDT_CLASS_DUPLICATE, /* entry has multiple references */ DDT_CLASS_UNIQUE, /* entry has a single reference */ DDT_CLASSES } ddt_class_t; _Static_assert(DDT_CLASSES < UINT8_MAX, "ddt_class_t must fit in a uint8_t"); /* * The "key" part of an on-disk entry. This is the unique "name" for a block, * that is, that parts of the block pointer that will always be the same for * the same data. */ typedef struct { zio_cksum_t ddk_cksum; /* 256-bit block checksum */ /* * Encoded with logical & physical size, encryption, and compression, * as follows: * +-------+-------+-------+-------+-------+-------+-------+-------+ * | 0 | 0 | 0 |X| comp| PSIZE | LSIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ */ uint64_t ddk_prop; } ddt_key_t; /* * Macros for accessing parts of a ddt_key_t. These are similar to their BP_* * counterparts. */ #define DDK_GET_LSIZE(ddk) \ BF64_GET_SB((ddk)->ddk_prop, 0, 16, SPA_MINBLOCKSHIFT, 1) #define DDK_SET_LSIZE(ddk, x) \ BF64_SET_SB((ddk)->ddk_prop, 0, 16, SPA_MINBLOCKSHIFT, 1, x) #define DDK_GET_PSIZE(ddk) \ BF64_GET_SB((ddk)->ddk_prop, 16, 16, SPA_MINBLOCKSHIFT, 1) #define DDK_SET_PSIZE(ddk, x) \ BF64_SET_SB((ddk)->ddk_prop, 16, 16, SPA_MINBLOCKSHIFT, 1, x) #define DDK_GET_COMPRESS(ddk) BF64_GET((ddk)->ddk_prop, 32, 7) #define DDK_SET_COMPRESS(ddk, x) BF64_SET((ddk)->ddk_prop, 32, 7, x) #define DDK_GET_CRYPT(ddk) BF64_GET((ddk)->ddk_prop, 39, 1) #define DDK_SET_CRYPT(ddk, x) BF64_SET((ddk)->ddk_prop, 39, 1, x) /* * The "value" part for an on-disk entry. These are the "physical" * characteristics of the stored block, such as its location on disk (DVAs), * birth txg and ref count. * * Note that an entry has an array of four ddt_phys_t, one for each number of * DVAs (copies= property) and another for additional "ditto" copies. Most * users of ddt_phys_t will handle indexing into or counting the phys they * want. */ typedef struct { dva_t ddp_dva[SPA_DVAS_PER_BP]; uint64_t ddp_refcnt; uint64_t ddp_phys_birth; } ddt_phys_t; /* * Named indexes into the ddt_phys_t array in each entry. * * Note, we no longer generate new DDT_PHYS_DITTO-type blocks. However, * we maintain the ability to free existing dedup-ditto blocks. */ enum ddt_phys_type { DDT_PHYS_DITTO = 0, DDT_PHYS_SINGLE = 1, DDT_PHYS_DOUBLE = 2, DDT_PHYS_TRIPLE = 3, DDT_PHYS_TYPES }; /* * A "live" entry, holding changes to an entry made this txg, and other data to * support loading, updating and repairing the entry. */ /* State flags for dde_flags */ -#define DDE_FLAG_LOADED (1 << 0) /* entry ready for use */ +#define DDE_FLAG_LOADED (1 << 0) /* entry ready for use */ +#define DDE_FLAG_OVERQUOTA (1 << 1) /* entry unusable, no space */ typedef struct { /* key must be first for ddt_key_compare */ ddt_key_t dde_key; /* ddt_tree key */ ddt_phys_t dde_phys[DDT_PHYS_TYPES]; /* on-disk data */ /* in-flight update IOs */ zio_t *dde_lead_zio[DDT_PHYS_TYPES]; /* copy of data after a repair read, to be rewritten */ struct abd *dde_repair_abd; /* storage type and class the entry was loaded from */ ddt_type_t dde_type; ddt_class_t dde_class; uint8_t dde_flags; /* load state flags */ kcondvar_t dde_cv; /* signaled when load completes */ + uint64_t dde_waiters; /* count of waiters on dde_cv */ avl_node_t dde_node; /* ddt_tree node */ } ddt_entry_t; /* * In-core DDT object. This covers all entries and stats for a the whole pool * for a given checksum type. */ typedef struct { kmutex_t ddt_lock; /* protects changes to all fields */ avl_tree_t ddt_tree; /* "live" (changed) entries this txg */ avl_tree_t ddt_repair_tree; /* entries being repaired */ enum zio_checksum ddt_checksum; /* checksum algorithm in use */ spa_t *ddt_spa; /* pool this ddt is on */ objset_t *ddt_os; /* ddt objset (always MOS) */ /* per-type/per-class entry store objects */ uint64_t ddt_object[DDT_TYPES][DDT_CLASSES]; /* object ids for whole-ddt and per-type/per-class stats */ uint64_t ddt_stat_object; ddt_object_t ddt_object_stats[DDT_TYPES][DDT_CLASSES]; /* type/class stats by power-2-sized referenced blocks */ ddt_histogram_t ddt_histogram[DDT_TYPES][DDT_CLASSES]; ddt_histogram_t ddt_histogram_cache[DDT_TYPES][DDT_CLASSES]; } ddt_t; /* * In-core and on-disk bookmark for DDT walks. This is a cursor for ddt_walk(), * and is stable across calls, even if the DDT is updated, the pool is * restarted or loaded on another system, or OpenZFS is upgraded. */ typedef struct { uint64_t ddb_class; uint64_t ddb_type; uint64_t ddb_checksum; uint64_t ddb_cursor; } ddt_bookmark_t; extern void ddt_bp_fill(const ddt_phys_t *ddp, blkptr_t *bp, uint64_t txg); extern void ddt_bp_create(enum zio_checksum checksum, const ddt_key_t *ddk, const ddt_phys_t *ddp, blkptr_t *bp); extern void ddt_phys_fill(ddt_phys_t *ddp, const blkptr_t *bp); extern void ddt_phys_clear(ddt_phys_t *ddp); extern void ddt_phys_addref(ddt_phys_t *ddp); extern void ddt_phys_decref(ddt_phys_t *ddp); extern ddt_phys_t *ddt_phys_select(const ddt_entry_t *dde, const blkptr_t *bp); extern void ddt_histogram_add(ddt_histogram_t *dst, const ddt_histogram_t *src); extern void ddt_histogram_stat(ddt_stat_t *dds, const ddt_histogram_t *ddh); extern boolean_t ddt_histogram_empty(const ddt_histogram_t *ddh); extern void ddt_get_dedup_object_stats(spa_t *spa, ddt_object_t *ddo); +extern uint64_t ddt_get_ddt_dsize(spa_t *spa); extern void ddt_get_dedup_histogram(spa_t *spa, ddt_histogram_t *ddh); extern void ddt_get_dedup_stats(spa_t *spa, ddt_stat_t *dds_total); extern uint64_t ddt_get_dedup_dspace(spa_t *spa); extern uint64_t ddt_get_pool_dedup_ratio(spa_t *spa); extern ddt_t *ddt_select(spa_t *spa, const blkptr_t *bp); extern void ddt_enter(ddt_t *ddt); extern void ddt_exit(ddt_t *ddt); extern void ddt_init(void); extern void ddt_fini(void); extern ddt_entry_t *ddt_lookup(ddt_t *ddt, const blkptr_t *bp, boolean_t add); extern void ddt_prefetch(spa_t *spa, const blkptr_t *bp); extern void ddt_remove(ddt_t *ddt, ddt_entry_t *dde); extern boolean_t ddt_class_contains(spa_t *spa, ddt_class_t max_class, const blkptr_t *bp); extern ddt_entry_t *ddt_repair_start(ddt_t *ddt, const blkptr_t *bp); extern void ddt_repair_done(ddt_t *ddt, ddt_entry_t *dde); extern int ddt_key_compare(const void *x1, const void *x2); extern void ddt_create(spa_t *spa); extern int ddt_load(spa_t *spa); extern void ddt_unload(spa_t *spa); extern void ddt_sync(spa_t *spa, uint64_t txg); extern int ddt_walk(spa_t *spa, ddt_bookmark_t *ddb, ddt_entry_t *dde); extern boolean_t ddt_addref(spa_t *spa, const blkptr_t *bp); #ifdef __cplusplus } #endif #endif /* _SYS_DDT_H */ diff --git a/include/sys/fs/zfs.h b/include/sys/fs/zfs.h index b572c22a294e..fb461c2f7a78 100644 --- a/include/sys/fs/zfs.h +++ b/include/sys/fs/zfs.h @@ -1,1905 +1,1907 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2013, 2017 Joyent, Inc. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019 Datto Inc. * Portions Copyright 2010 Robert Milkowski * Copyright (c) 2021, Colm Buckley * Copyright (c) 2022 Hewlett Packard Enterprise Development LP. */ #ifndef _SYS_FS_ZFS_H #define _SYS_FS_ZFS_H extern __attribute__((visibility("default"))) #include #include #ifdef __cplusplus extern "C" { #endif /* * Types and constants shared between userland and the kernel. */ /* * Each dataset can be one of the following types. These constants can be * combined into masks that can be passed to various functions. */ typedef enum { ZFS_TYPE_INVALID = 0, ZFS_TYPE_FILESYSTEM = (1 << 0), ZFS_TYPE_SNAPSHOT = (1 << 1), ZFS_TYPE_VOLUME = (1 << 2), ZFS_TYPE_POOL = (1 << 3), ZFS_TYPE_BOOKMARK = (1 << 4), ZFS_TYPE_VDEV = (1 << 5), } zfs_type_t; /* * NB: lzc_dataset_type should be updated whenever a new objset type is added, * if it represents a real type of a dataset that can be created from userland. */ typedef enum dmu_objset_type { DMU_OST_NONE, DMU_OST_META, DMU_OST_ZFS, DMU_OST_ZVOL, DMU_OST_OTHER, /* For testing only! */ DMU_OST_ANY, /* Be careful! */ DMU_OST_NUMTYPES } dmu_objset_type_t; #define ZFS_TYPE_DATASET \ (ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT) /* * All of these include the terminating NUL byte. */ #define ZAP_MAXNAMELEN 256 #define ZAP_MAXVALUELEN (1024 * 8) #define ZAP_OLDMAXVALUELEN 1024 #define ZFS_MAX_DATASET_NAME_LEN 256 /* * Dataset properties are identified by these constants and must be added to * the end of this list to ensure that external consumers are not affected * by the change. If you make any changes to this list, be sure to update * the property table in module/zcommon/zfs_prop.c. */ typedef enum { ZPROP_CONT = -2, ZPROP_INVAL = -1, ZPROP_USERPROP = ZPROP_INVAL, ZFS_PROP_TYPE = 0, ZFS_PROP_CREATION, ZFS_PROP_USED, ZFS_PROP_AVAILABLE, ZFS_PROP_REFERENCED, ZFS_PROP_COMPRESSRATIO, ZFS_PROP_MOUNTED, ZFS_PROP_ORIGIN, ZFS_PROP_QUOTA, ZFS_PROP_RESERVATION, ZFS_PROP_VOLSIZE, ZFS_PROP_VOLBLOCKSIZE, ZFS_PROP_RECORDSIZE, ZFS_PROP_MOUNTPOINT, ZFS_PROP_SHARENFS, ZFS_PROP_CHECKSUM, ZFS_PROP_COMPRESSION, ZFS_PROP_ATIME, ZFS_PROP_DEVICES, ZFS_PROP_EXEC, ZFS_PROP_SETUID, ZFS_PROP_READONLY, ZFS_PROP_ZONED, ZFS_PROP_SNAPDIR, ZFS_PROP_ACLMODE, ZFS_PROP_ACLINHERIT, ZFS_PROP_CREATETXG, ZFS_PROP_NAME, /* not exposed to the user */ ZFS_PROP_CANMOUNT, ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */ ZFS_PROP_XATTR, ZFS_PROP_NUMCLONES, /* not exposed to the user */ ZFS_PROP_COPIES, ZFS_PROP_VERSION, ZFS_PROP_UTF8ONLY, ZFS_PROP_NORMALIZE, ZFS_PROP_CASE, ZFS_PROP_VSCAN, ZFS_PROP_NBMAND, ZFS_PROP_SHARESMB, ZFS_PROP_REFQUOTA, ZFS_PROP_REFRESERVATION, ZFS_PROP_GUID, ZFS_PROP_PRIMARYCACHE, ZFS_PROP_SECONDARYCACHE, ZFS_PROP_USEDSNAP, ZFS_PROP_USEDDS, ZFS_PROP_USEDCHILD, ZFS_PROP_USEDREFRESERV, ZFS_PROP_USERACCOUNTING, /* not exposed to the user */ ZFS_PROP_STMF_SHAREINFO, /* not exposed to the user */ ZFS_PROP_DEFER_DESTROY, ZFS_PROP_USERREFS, ZFS_PROP_LOGBIAS, ZFS_PROP_UNIQUE, /* not exposed to the user */ ZFS_PROP_OBJSETID, ZFS_PROP_DEDUP, ZFS_PROP_MLSLABEL, ZFS_PROP_SYNC, ZFS_PROP_DNODESIZE, ZFS_PROP_REFRATIO, ZFS_PROP_WRITTEN, ZFS_PROP_CLONES, ZFS_PROP_LOGICALUSED, ZFS_PROP_LOGICALREFERENCED, ZFS_PROP_INCONSISTENT, /* not exposed to the user */ ZFS_PROP_VOLMODE, ZFS_PROP_FILESYSTEM_LIMIT, ZFS_PROP_SNAPSHOT_LIMIT, ZFS_PROP_FILESYSTEM_COUNT, ZFS_PROP_SNAPSHOT_COUNT, ZFS_PROP_SNAPDEV, ZFS_PROP_ACLTYPE, ZFS_PROP_SELINUX_CONTEXT, ZFS_PROP_SELINUX_FSCONTEXT, ZFS_PROP_SELINUX_DEFCONTEXT, ZFS_PROP_SELINUX_ROOTCONTEXT, ZFS_PROP_RELATIME, ZFS_PROP_REDUNDANT_METADATA, ZFS_PROP_OVERLAY, ZFS_PROP_PREV_SNAP, ZFS_PROP_RECEIVE_RESUME_TOKEN, ZFS_PROP_ENCRYPTION, ZFS_PROP_KEYLOCATION, ZFS_PROP_KEYFORMAT, ZFS_PROP_PBKDF2_SALT, ZFS_PROP_PBKDF2_ITERS, ZFS_PROP_ENCRYPTION_ROOT, ZFS_PROP_KEY_GUID, ZFS_PROP_KEYSTATUS, ZFS_PROP_REMAPTXG, /* obsolete - no longer used */ ZFS_PROP_SPECIAL_SMALL_BLOCKS, ZFS_PROP_IVSET_GUID, /* not exposed to the user */ ZFS_PROP_REDACTED, ZFS_PROP_REDACT_SNAPS, ZFS_PROP_SNAPSHOTS_CHANGED, ZFS_PROP_PREFETCH, ZFS_PROP_VOLTHREADING, ZFS_NUM_PROPS } zfs_prop_t; typedef enum { ZFS_PROP_USERUSED, ZFS_PROP_USERQUOTA, ZFS_PROP_GROUPUSED, ZFS_PROP_GROUPQUOTA, ZFS_PROP_USEROBJUSED, ZFS_PROP_USEROBJQUOTA, ZFS_PROP_GROUPOBJUSED, ZFS_PROP_GROUPOBJQUOTA, ZFS_PROP_PROJECTUSED, ZFS_PROP_PROJECTQUOTA, ZFS_PROP_PROJECTOBJUSED, ZFS_PROP_PROJECTOBJQUOTA, ZFS_NUM_USERQUOTA_PROPS } zfs_userquota_prop_t; _SYS_FS_ZFS_H const char *const zfs_userquota_prop_prefixes[ ZFS_NUM_USERQUOTA_PROPS]; /* * Pool properties are identified by these constants and must be added to the * end of this list to ensure that external consumers are not affected * by the change. Properties must be registered in zfs_prop_init(). */ typedef enum { ZPOOL_PROP_INVAL = -1, ZPOOL_PROP_NAME, ZPOOL_PROP_SIZE, ZPOOL_PROP_CAPACITY, ZPOOL_PROP_ALTROOT, ZPOOL_PROP_HEALTH, ZPOOL_PROP_GUID, ZPOOL_PROP_VERSION, ZPOOL_PROP_BOOTFS, ZPOOL_PROP_DELEGATION, ZPOOL_PROP_AUTOREPLACE, ZPOOL_PROP_CACHEFILE, ZPOOL_PROP_FAILUREMODE, ZPOOL_PROP_LISTSNAPS, ZPOOL_PROP_AUTOEXPAND, ZPOOL_PROP_DEDUPDITTO, ZPOOL_PROP_DEDUPRATIO, ZPOOL_PROP_FREE, ZPOOL_PROP_ALLOCATED, ZPOOL_PROP_READONLY, ZPOOL_PROP_ASHIFT, ZPOOL_PROP_COMMENT, ZPOOL_PROP_EXPANDSZ, ZPOOL_PROP_FREEING, ZPOOL_PROP_FRAGMENTATION, ZPOOL_PROP_LEAKED, ZPOOL_PROP_MAXBLOCKSIZE, ZPOOL_PROP_TNAME, ZPOOL_PROP_MAXDNODESIZE, ZPOOL_PROP_MULTIHOST, ZPOOL_PROP_CHECKPOINT, ZPOOL_PROP_LOAD_GUID, ZPOOL_PROP_AUTOTRIM, ZPOOL_PROP_COMPATIBILITY, ZPOOL_PROP_BCLONEUSED, ZPOOL_PROP_BCLONESAVED, ZPOOL_PROP_BCLONERATIO, + ZPOOL_PROP_DEDUP_TABLE_SIZE, + ZPOOL_PROP_DEDUP_TABLE_QUOTA, ZPOOL_NUM_PROPS } zpool_prop_t; /* Small enough to not hog a whole line of printout in zpool(8). */ #define ZPROP_MAX_COMMENT 32 #define ZPROP_BOOLEAN_NA 2 #define ZPROP_VALUE "value" #define ZPROP_SOURCE "source" typedef enum { ZPROP_SRC_NONE = 0x1, ZPROP_SRC_DEFAULT = 0x2, ZPROP_SRC_TEMPORARY = 0x4, ZPROP_SRC_LOCAL = 0x8, ZPROP_SRC_INHERITED = 0x10, ZPROP_SRC_RECEIVED = 0x20 } zprop_source_t; #define ZPROP_SRC_ALL 0x3f #define ZPROP_SOURCE_VAL_RECVD "$recvd" #define ZPROP_N_MORE_ERRORS "N_MORE_ERRORS" /* * Dataset flag implemented as a special entry in the props zap object * indicating that the dataset has received properties on or after * SPA_VERSION_RECVD_PROPS. The first such receive blows away local properties * just as it did in earlier versions, and thereafter, local properties are * preserved. */ #define ZPROP_HAS_RECVD "$hasrecvd" typedef enum { ZPROP_ERR_NOCLEAR = 0x1, /* failure to clear existing props */ ZPROP_ERR_NORESTORE = 0x2 /* failure to restore props on error */ } zprop_errflags_t; typedef int (*zprop_func)(int, void *); /* * Properties to be set on the root file system of a new pool * are stuffed into their own nvlist, which is then included in * the properties nvlist with the pool properties. */ #define ZPOOL_ROOTFS_PROPS "root-props-nvl" /* * Length of 'written@' and 'written#' */ #define ZFS_WRITTEN_PROP_PREFIX_LEN 8 /* * VDEV properties are identified by these constants and must be added to the * end of this list to ensure that external consumers are not affected * by the change. If you make any changes to this list, be sure to update * the property table in usr/src/common/zfs/zpool_prop.c. */ typedef enum { VDEV_PROP_INVAL = -1, VDEV_PROP_USERPROP = VDEV_PROP_INVAL, VDEV_PROP_NAME, VDEV_PROP_CAPACITY, VDEV_PROP_STATE, VDEV_PROP_GUID, VDEV_PROP_ASIZE, VDEV_PROP_PSIZE, VDEV_PROP_ASHIFT, VDEV_PROP_SIZE, VDEV_PROP_FREE, VDEV_PROP_ALLOCATED, VDEV_PROP_COMMENT, VDEV_PROP_EXPANDSZ, VDEV_PROP_FRAGMENTATION, VDEV_PROP_BOOTSIZE, VDEV_PROP_PARITY, VDEV_PROP_PATH, VDEV_PROP_DEVID, VDEV_PROP_PHYS_PATH, VDEV_PROP_ENC_PATH, VDEV_PROP_FRU, VDEV_PROP_PARENT, VDEV_PROP_CHILDREN, VDEV_PROP_NUMCHILDREN, VDEV_PROP_READ_ERRORS, VDEV_PROP_WRITE_ERRORS, VDEV_PROP_CHECKSUM_ERRORS, VDEV_PROP_INITIALIZE_ERRORS, VDEV_PROP_OPS_NULL, VDEV_PROP_OPS_READ, VDEV_PROP_OPS_WRITE, VDEV_PROP_OPS_FREE, VDEV_PROP_OPS_CLAIM, VDEV_PROP_OPS_TRIM, VDEV_PROP_BYTES_NULL, VDEV_PROP_BYTES_READ, VDEV_PROP_BYTES_WRITE, VDEV_PROP_BYTES_FREE, VDEV_PROP_BYTES_CLAIM, VDEV_PROP_BYTES_TRIM, VDEV_PROP_REMOVING, VDEV_PROP_ALLOCATING, VDEV_PROP_FAILFAST, VDEV_PROP_CHECKSUM_N, VDEV_PROP_CHECKSUM_T, VDEV_PROP_IO_N, VDEV_PROP_IO_T, VDEV_PROP_RAIDZ_EXPANDING, VDEV_PROP_SLOW_IO_N, VDEV_PROP_SLOW_IO_T, VDEV_PROP_TRIM_SUPPORT, VDEV_PROP_TRIM_ERRORS, VDEV_PROP_SLOW_IOS, VDEV_NUM_PROPS } vdev_prop_t; /* * Dataset property functions shared between libzfs and kernel. */ _SYS_FS_ZFS_H const char *zfs_prop_default_string(zfs_prop_t); _SYS_FS_ZFS_H uint64_t zfs_prop_default_numeric(zfs_prop_t); _SYS_FS_ZFS_H boolean_t zfs_prop_readonly(zfs_prop_t); _SYS_FS_ZFS_H boolean_t zfs_prop_visible(zfs_prop_t prop); _SYS_FS_ZFS_H boolean_t zfs_prop_inheritable(zfs_prop_t); _SYS_FS_ZFS_H boolean_t zfs_prop_setonce(zfs_prop_t); _SYS_FS_ZFS_H boolean_t zfs_prop_encryption_key_param(zfs_prop_t); _SYS_FS_ZFS_H boolean_t zfs_prop_valid_keylocation(const char *, boolean_t); _SYS_FS_ZFS_H const char *zfs_prop_to_name(zfs_prop_t); _SYS_FS_ZFS_H zfs_prop_t zfs_name_to_prop(const char *); _SYS_FS_ZFS_H boolean_t zfs_prop_user(const char *); _SYS_FS_ZFS_H boolean_t zfs_prop_userquota(const char *); _SYS_FS_ZFS_H boolean_t zfs_prop_written(const char *); _SYS_FS_ZFS_H int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **); _SYS_FS_ZFS_H int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *); _SYS_FS_ZFS_H uint64_t zfs_prop_random_value(zfs_prop_t, uint64_t seed); _SYS_FS_ZFS_H boolean_t zfs_prop_valid_for_type(int, zfs_type_t, boolean_t); /* * Pool property functions shared between libzfs and kernel. */ _SYS_FS_ZFS_H zpool_prop_t zpool_name_to_prop(const char *); _SYS_FS_ZFS_H const char *zpool_prop_to_name(zpool_prop_t); _SYS_FS_ZFS_H const char *zpool_prop_default_string(zpool_prop_t); _SYS_FS_ZFS_H uint64_t zpool_prop_default_numeric(zpool_prop_t); _SYS_FS_ZFS_H boolean_t zpool_prop_readonly(zpool_prop_t); _SYS_FS_ZFS_H boolean_t zpool_prop_setonce(zpool_prop_t); _SYS_FS_ZFS_H boolean_t zpool_prop_feature(const char *); _SYS_FS_ZFS_H boolean_t zpool_prop_unsupported(const char *); _SYS_FS_ZFS_H int zpool_prop_index_to_string(zpool_prop_t, uint64_t, const char **); _SYS_FS_ZFS_H int zpool_prop_string_to_index(zpool_prop_t, const char *, uint64_t *); _SYS_FS_ZFS_H uint64_t zpool_prop_random_value(zpool_prop_t, uint64_t seed); /* * VDEV property functions shared between libzfs and kernel. */ _SYS_FS_ZFS_H vdev_prop_t vdev_name_to_prop(const char *); _SYS_FS_ZFS_H boolean_t vdev_prop_user(const char *name); _SYS_FS_ZFS_H const char *vdev_prop_to_name(vdev_prop_t); _SYS_FS_ZFS_H const char *vdev_prop_default_string(vdev_prop_t); _SYS_FS_ZFS_H uint64_t vdev_prop_default_numeric(vdev_prop_t); _SYS_FS_ZFS_H boolean_t vdev_prop_readonly(vdev_prop_t prop); _SYS_FS_ZFS_H int vdev_prop_index_to_string(vdev_prop_t, uint64_t, const char **); _SYS_FS_ZFS_H int vdev_prop_string_to_index(vdev_prop_t, const char *, uint64_t *); _SYS_FS_ZFS_H boolean_t zpool_prop_vdev(const char *name); _SYS_FS_ZFS_H uint64_t vdev_prop_random_value(vdev_prop_t prop, uint64_t seed); /* * Definitions for the Delegation. */ typedef enum { ZFS_DELEG_WHO_UNKNOWN = 0, ZFS_DELEG_USER = 'u', ZFS_DELEG_USER_SETS = 'U', ZFS_DELEG_GROUP = 'g', ZFS_DELEG_GROUP_SETS = 'G', ZFS_DELEG_EVERYONE = 'e', ZFS_DELEG_EVERYONE_SETS = 'E', ZFS_DELEG_CREATE = 'c', ZFS_DELEG_CREATE_SETS = 'C', ZFS_DELEG_NAMED_SET = 's', ZFS_DELEG_NAMED_SET_SETS = 'S' } zfs_deleg_who_type_t; typedef enum { ZFS_DELEG_NONE = 0, ZFS_DELEG_PERM_LOCAL = 1, ZFS_DELEG_PERM_DESCENDENT = 2, ZFS_DELEG_PERM_LOCALDESCENDENT = 3, ZFS_DELEG_PERM_CREATE = 4 } zfs_deleg_inherit_t; #define ZFS_DELEG_PERM_UID "uid" #define ZFS_DELEG_PERM_GID "gid" #define ZFS_DELEG_PERM_GROUPS "groups" #define ZFS_MLSLABEL_DEFAULT "none" #define ZFS_SMB_ACL_SRC "src" #define ZFS_SMB_ACL_TARGET "target" typedef enum { ZFS_CANMOUNT_OFF = 0, ZFS_CANMOUNT_ON = 1, ZFS_CANMOUNT_NOAUTO = 2 } zfs_canmount_type_t; typedef enum { ZFS_LOGBIAS_LATENCY = 0, ZFS_LOGBIAS_THROUGHPUT = 1 } zfs_logbias_op_t; typedef enum zfs_share_op { ZFS_SHARE_NFS = 0, ZFS_UNSHARE_NFS = 1, ZFS_SHARE_SMB = 2, ZFS_UNSHARE_SMB = 3 } zfs_share_op_t; typedef enum zfs_smb_acl_op { ZFS_SMB_ACL_ADD, ZFS_SMB_ACL_REMOVE, ZFS_SMB_ACL_RENAME, ZFS_SMB_ACL_PURGE } zfs_smb_acl_op_t; typedef enum zfs_cache_type { ZFS_CACHE_NONE = 0, ZFS_CACHE_METADATA = 1, ZFS_CACHE_ALL = 2 } zfs_cache_type_t; typedef enum { ZFS_SYNC_STANDARD = 0, ZFS_SYNC_ALWAYS = 1, ZFS_SYNC_DISABLED = 2 } zfs_sync_type_t; typedef enum { ZFS_XATTR_OFF = 0, ZFS_XATTR_DIR = 1, ZFS_XATTR_SA = 2 } zfs_xattr_type_t; typedef enum { ZFS_DNSIZE_LEGACY = 0, ZFS_DNSIZE_AUTO = 1, ZFS_DNSIZE_1K = 1024, ZFS_DNSIZE_2K = 2048, ZFS_DNSIZE_4K = 4096, ZFS_DNSIZE_8K = 8192, ZFS_DNSIZE_16K = 16384 } zfs_dnsize_type_t; typedef enum { ZFS_REDUNDANT_METADATA_ALL, ZFS_REDUNDANT_METADATA_MOST, ZFS_REDUNDANT_METADATA_SOME, ZFS_REDUNDANT_METADATA_NONE } zfs_redundant_metadata_type_t; typedef enum { ZFS_VOLMODE_DEFAULT = 0, ZFS_VOLMODE_GEOM = 1, ZFS_VOLMODE_DEV = 2, ZFS_VOLMODE_NONE = 3 } zfs_volmode_t; typedef enum zfs_keystatus { ZFS_KEYSTATUS_NONE = 0, ZFS_KEYSTATUS_UNAVAILABLE, ZFS_KEYSTATUS_AVAILABLE, } zfs_keystatus_t; typedef enum zfs_keyformat { ZFS_KEYFORMAT_NONE = 0, ZFS_KEYFORMAT_RAW, ZFS_KEYFORMAT_HEX, ZFS_KEYFORMAT_PASSPHRASE, ZFS_KEYFORMAT_FORMATS } zfs_keyformat_t; typedef enum zfs_key_location { ZFS_KEYLOCATION_NONE = 0, ZFS_KEYLOCATION_PROMPT, ZFS_KEYLOCATION_URI, ZFS_KEYLOCATION_LOCATIONS } zfs_keylocation_t; typedef enum { ZFS_PREFETCH_NONE = 0, ZFS_PREFETCH_METADATA = 1, ZFS_PREFETCH_ALL = 2 } zfs_prefetch_type_t; #define DEFAULT_PBKDF2_ITERATIONS 350000 #define MIN_PBKDF2_ITERATIONS 100000 /* * On-disk version number. */ #define SPA_VERSION_1 1ULL #define SPA_VERSION_2 2ULL #define SPA_VERSION_3 3ULL #define SPA_VERSION_4 4ULL #define SPA_VERSION_5 5ULL #define SPA_VERSION_6 6ULL #define SPA_VERSION_7 7ULL #define SPA_VERSION_8 8ULL #define SPA_VERSION_9 9ULL #define SPA_VERSION_10 10ULL #define SPA_VERSION_11 11ULL #define SPA_VERSION_12 12ULL #define SPA_VERSION_13 13ULL #define SPA_VERSION_14 14ULL #define SPA_VERSION_15 15ULL #define SPA_VERSION_16 16ULL #define SPA_VERSION_17 17ULL #define SPA_VERSION_18 18ULL #define SPA_VERSION_19 19ULL #define SPA_VERSION_20 20ULL #define SPA_VERSION_21 21ULL #define SPA_VERSION_22 22ULL #define SPA_VERSION_23 23ULL #define SPA_VERSION_24 24ULL #define SPA_VERSION_25 25ULL #define SPA_VERSION_26 26ULL #define SPA_VERSION_27 27ULL #define SPA_VERSION_28 28ULL #define SPA_VERSION_5000 5000ULL /* * The incrementing pool version number has been replaced by pool feature * flags. For more details, see zfeature.c. */ #define SPA_VERSION SPA_VERSION_5000 #define SPA_VERSION_STRING "5000" /* * Symbolic names for the changes that caused a SPA_VERSION switch. * Used in the code when checking for presence or absence of a feature. * Feel free to define multiple symbolic names for each version if there * were multiple changes to on-disk structures during that version. * * NOTE: When checking the current SPA_VERSION in your code, be sure * to use spa_version() since it reports the version of the * last synced uberblock. Checking the in-flight version can * be dangerous in some cases. */ #define SPA_VERSION_INITIAL SPA_VERSION_1 #define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2 #define SPA_VERSION_SPARES SPA_VERSION_3 #define SPA_VERSION_RAIDZ2 SPA_VERSION_3 #define SPA_VERSION_BPOBJ_ACCOUNT SPA_VERSION_3 #define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3 #define SPA_VERSION_DNODE_BYTES SPA_VERSION_3 #define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4 #define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5 #define SPA_VERSION_BOOTFS SPA_VERSION_6 #define SPA_VERSION_SLOGS SPA_VERSION_7 #define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8 #define SPA_VERSION_FUID SPA_VERSION_9 #define SPA_VERSION_REFRESERVATION SPA_VERSION_9 #define SPA_VERSION_REFQUOTA SPA_VERSION_9 #define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9 #define SPA_VERSION_L2CACHE SPA_VERSION_10 #define SPA_VERSION_NEXT_CLONES SPA_VERSION_11 #define SPA_VERSION_ORIGIN SPA_VERSION_11 #define SPA_VERSION_DSL_SCRUB SPA_VERSION_11 #define SPA_VERSION_SNAP_PROPS SPA_VERSION_12 #define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13 #define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14 #define SPA_VERSION_USERSPACE SPA_VERSION_15 #define SPA_VERSION_STMF_PROP SPA_VERSION_16 #define SPA_VERSION_RAIDZ3 SPA_VERSION_17 #define SPA_VERSION_USERREFS SPA_VERSION_18 #define SPA_VERSION_HOLES SPA_VERSION_19 #define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20 #define SPA_VERSION_DEDUP SPA_VERSION_21 #define SPA_VERSION_RECVD_PROPS SPA_VERSION_22 #define SPA_VERSION_SLIM_ZIL SPA_VERSION_23 #define SPA_VERSION_SA SPA_VERSION_24 #define SPA_VERSION_SCAN SPA_VERSION_25 #define SPA_VERSION_DIR_CLONES SPA_VERSION_26 #define SPA_VERSION_DEADLISTS SPA_VERSION_26 #define SPA_VERSION_FAST_SNAP SPA_VERSION_27 #define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28 #define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28 #define SPA_VERSION_FEATURES SPA_VERSION_5000 #define SPA_VERSION_IS_SUPPORTED(v) \ (((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \ ((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION)) /* * ZPL version - rev'd whenever an incompatible on-disk format change * occurs. This is independent of SPA/DMU/ZAP versioning. You must * also update the version_table[] and help message in zfs_prop.c. */ #define ZPL_VERSION_1 1ULL #define ZPL_VERSION_2 2ULL #define ZPL_VERSION_3 3ULL #define ZPL_VERSION_4 4ULL #define ZPL_VERSION_5 5ULL #define ZPL_VERSION ZPL_VERSION_5 #define ZPL_VERSION_STRING "5" #define ZPL_VERSION_INITIAL ZPL_VERSION_1 #define ZPL_VERSION_DIRENT_TYPE ZPL_VERSION_2 #define ZPL_VERSION_FUID ZPL_VERSION_3 #define ZPL_VERSION_NORMALIZATION ZPL_VERSION_3 #define ZPL_VERSION_SYSATTR ZPL_VERSION_3 #define ZPL_VERSION_USERSPACE ZPL_VERSION_4 #define ZPL_VERSION_SA ZPL_VERSION_5 /* Persistent L2ARC version */ #define L2ARC_PERSISTENT_VERSION_1 1ULL #define L2ARC_PERSISTENT_VERSION L2ARC_PERSISTENT_VERSION_1 #define L2ARC_PERSISTENT_VERSION_STRING "1" /* Rewind policy information */ #define ZPOOL_NO_REWIND 1 /* No policy - default behavior */ #define ZPOOL_NEVER_REWIND 2 /* Do not search for best txg or rewind */ #define ZPOOL_TRY_REWIND 4 /* Search for best txg, but do not rewind */ #define ZPOOL_DO_REWIND 8 /* Rewind to best txg w/in deferred frees */ #define ZPOOL_EXTREME_REWIND 16 /* Allow extreme measures to find best txg */ #define ZPOOL_REWIND_MASK 28 /* All the possible rewind bits */ #define ZPOOL_REWIND_POLICIES 31 /* All the possible policy bits */ typedef struct zpool_load_policy { uint32_t zlp_rewind; /* rewind policy requested */ uint64_t zlp_maxmeta; /* max acceptable meta-data errors */ uint64_t zlp_maxdata; /* max acceptable data errors */ uint64_t zlp_txg; /* specific txg to load */ } zpool_load_policy_t; /* * The following are configuration names used in the nvlist describing a pool's * configuration. New on-disk names should be prefixed with ":" * (e.g. "org.openzfs:") to avoid conflicting names being developed * independently. */ #define ZPOOL_CONFIG_VERSION "version" #define ZPOOL_CONFIG_POOL_NAME "name" #define ZPOOL_CONFIG_POOL_STATE "state" #define ZPOOL_CONFIG_POOL_TXG "txg" #define ZPOOL_CONFIG_POOL_GUID "pool_guid" #define ZPOOL_CONFIG_CREATE_TXG "create_txg" #define ZPOOL_CONFIG_TOP_GUID "top_guid" #define ZPOOL_CONFIG_VDEV_TREE "vdev_tree" #define ZPOOL_CONFIG_TYPE "type" #define ZPOOL_CONFIG_CHILDREN "children" #define ZPOOL_CONFIG_ID "id" #define ZPOOL_CONFIG_GUID "guid" #define ZPOOL_CONFIG_INDIRECT_OBJECT "com.delphix:indirect_object" #define ZPOOL_CONFIG_INDIRECT_BIRTHS "com.delphix:indirect_births" #define ZPOOL_CONFIG_PREV_INDIRECT_VDEV "com.delphix:prev_indirect_vdev" #define ZPOOL_CONFIG_PATH "path" #define ZPOOL_CONFIG_DEVID "devid" #define ZPOOL_CONFIG_SPARE_ID "spareid" #define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array" #define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift" #define ZPOOL_CONFIG_ASHIFT "ashift" #define ZPOOL_CONFIG_ASIZE "asize" #define ZPOOL_CONFIG_DTL "DTL" #define ZPOOL_CONFIG_SCAN_STATS "scan_stats" /* not stored on disk */ #define ZPOOL_CONFIG_REMOVAL_STATS "removal_stats" /* not stored on disk */ #define ZPOOL_CONFIG_CHECKPOINT_STATS "checkpoint_stats" /* not on disk */ #define ZPOOL_CONFIG_RAIDZ_EXPAND_STATS "raidz_expand_stats" /* not on disk */ #define ZPOOL_CONFIG_VDEV_STATS "vdev_stats" /* not stored on disk */ #define ZPOOL_CONFIG_INDIRECT_SIZE "indirect_size" /* not stored on disk */ /* container nvlist of extended stats */ #define ZPOOL_CONFIG_VDEV_STATS_EX "vdev_stats_ex" /* Active queue read/write stats */ #define ZPOOL_CONFIG_VDEV_SYNC_R_ACTIVE_QUEUE "vdev_sync_r_active_queue" #define ZPOOL_CONFIG_VDEV_SYNC_W_ACTIVE_QUEUE "vdev_sync_w_active_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_R_ACTIVE_QUEUE "vdev_async_r_active_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE "vdev_async_w_active_queue" #define ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE "vdev_async_scrub_active_queue" #define ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE "vdev_async_trim_active_queue" #define ZPOOL_CONFIG_VDEV_REBUILD_ACTIVE_QUEUE "vdev_rebuild_active_queue" /* Queue sizes */ #define ZPOOL_CONFIG_VDEV_SYNC_R_PEND_QUEUE "vdev_sync_r_pend_queue" #define ZPOOL_CONFIG_VDEV_SYNC_W_PEND_QUEUE "vdev_sync_w_pend_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_R_PEND_QUEUE "vdev_async_r_pend_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_W_PEND_QUEUE "vdev_async_w_pend_queue" #define ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE "vdev_async_scrub_pend_queue" #define ZPOOL_CONFIG_VDEV_TRIM_PEND_QUEUE "vdev_async_trim_pend_queue" #define ZPOOL_CONFIG_VDEV_REBUILD_PEND_QUEUE "vdev_rebuild_pend_queue" /* Latency read/write histogram stats */ #define ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO "vdev_tot_r_lat_histo" #define ZPOOL_CONFIG_VDEV_TOT_W_LAT_HISTO "vdev_tot_w_lat_histo" #define ZPOOL_CONFIG_VDEV_DISK_R_LAT_HISTO "vdev_disk_r_lat_histo" #define ZPOOL_CONFIG_VDEV_DISK_W_LAT_HISTO "vdev_disk_w_lat_histo" #define ZPOOL_CONFIG_VDEV_SYNC_R_LAT_HISTO "vdev_sync_r_lat_histo" #define ZPOOL_CONFIG_VDEV_SYNC_W_LAT_HISTO "vdev_sync_w_lat_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO "vdev_async_r_lat_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO "vdev_async_w_lat_histo" #define ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO "vdev_scrub_histo" #define ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO "vdev_trim_histo" #define ZPOOL_CONFIG_VDEV_REBUILD_LAT_HISTO "vdev_rebuild_histo" /* Request size histograms */ #define ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO "vdev_sync_ind_r_histo" #define ZPOOL_CONFIG_VDEV_SYNC_IND_W_HISTO "vdev_sync_ind_w_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_IND_R_HISTO "vdev_async_ind_r_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_IND_W_HISTO "vdev_async_ind_w_histo" #define ZPOOL_CONFIG_VDEV_IND_SCRUB_HISTO "vdev_ind_scrub_histo" #define ZPOOL_CONFIG_VDEV_IND_TRIM_HISTO "vdev_ind_trim_histo" #define ZPOOL_CONFIG_VDEV_IND_REBUILD_HISTO "vdev_ind_rebuild_histo" #define ZPOOL_CONFIG_VDEV_SYNC_AGG_R_HISTO "vdev_sync_agg_r_histo" #define ZPOOL_CONFIG_VDEV_SYNC_AGG_W_HISTO "vdev_sync_agg_w_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_AGG_R_HISTO "vdev_async_agg_r_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_AGG_W_HISTO "vdev_async_agg_w_histo" #define ZPOOL_CONFIG_VDEV_AGG_SCRUB_HISTO "vdev_agg_scrub_histo" #define ZPOOL_CONFIG_VDEV_AGG_TRIM_HISTO "vdev_agg_trim_histo" #define ZPOOL_CONFIG_VDEV_AGG_REBUILD_HISTO "vdev_agg_rebuild_histo" /* Number of slow IOs */ #define ZPOOL_CONFIG_VDEV_SLOW_IOS "vdev_slow_ios" /* vdev enclosure sysfs path */ #define ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH "vdev_enc_sysfs_path" #define ZPOOL_CONFIG_WHOLE_DISK "whole_disk" #define ZPOOL_CONFIG_ERRCOUNT "error_count" #define ZPOOL_CONFIG_NOT_PRESENT "not_present" #define ZPOOL_CONFIG_SPARES "spares" #define ZPOOL_CONFIG_IS_SPARE "is_spare" #define ZPOOL_CONFIG_NPARITY "nparity" #define ZPOOL_CONFIG_RAIDZ_EXPANDING "raidz_expanding" #define ZPOOL_CONFIG_RAIDZ_EXPAND_TXGS "raidz_expand_txgs" #define ZPOOL_CONFIG_HOSTID "hostid" #define ZPOOL_CONFIG_HOSTNAME "hostname" #define ZPOOL_CONFIG_LOADED_TIME "initial_load_time" #define ZPOOL_CONFIG_UNSPARE "unspare" #define ZPOOL_CONFIG_PHYS_PATH "phys_path" #define ZPOOL_CONFIG_IS_LOG "is_log" #define ZPOOL_CONFIG_L2CACHE "l2cache" #define ZPOOL_CONFIG_HOLE_ARRAY "hole_array" #define ZPOOL_CONFIG_VDEV_CHILDREN "vdev_children" #define ZPOOL_CONFIG_IS_HOLE "is_hole" #define ZPOOL_CONFIG_DDT_HISTOGRAM "ddt_histogram" #define ZPOOL_CONFIG_DDT_OBJ_STATS "ddt_object_stats" #define ZPOOL_CONFIG_DDT_STATS "ddt_stats" #define ZPOOL_CONFIG_SPLIT "splitcfg" #define ZPOOL_CONFIG_ORIG_GUID "orig_guid" #define ZPOOL_CONFIG_SPLIT_GUID "split_guid" #define ZPOOL_CONFIG_SPLIT_LIST "guid_list" #define ZPOOL_CONFIG_NONALLOCATING "non_allocating" #define ZPOOL_CONFIG_REMOVING "removing" #define ZPOOL_CONFIG_RESILVER_TXG "resilver_txg" #define ZPOOL_CONFIG_REBUILD_TXG "rebuild_txg" #define ZPOOL_CONFIG_COMMENT "comment" #define ZPOOL_CONFIG_SUSPENDED "suspended" /* not stored on disk */ #define ZPOOL_CONFIG_SUSPENDED_REASON "suspended_reason" /* not stored */ #define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */ #define ZPOOL_CONFIG_BOOTFS "bootfs" /* not stored on disk */ #define ZPOOL_CONFIG_MISSING_DEVICES "missing_vdevs" /* not stored on disk */ #define ZPOOL_CONFIG_LOAD_INFO "load_info" /* not stored on disk */ #define ZPOOL_CONFIG_REWIND_INFO "rewind_info" /* not stored on disk */ #define ZPOOL_CONFIG_UNSUP_FEAT "unsup_feat" /* not stored on disk */ #define ZPOOL_CONFIG_ENABLED_FEAT "enabled_feat" /* not stored on disk */ #define ZPOOL_CONFIG_CAN_RDONLY "can_rdonly" /* not stored on disk */ #define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read" #define ZPOOL_CONFIG_FEATURE_STATS "feature_stats" /* not stored on disk */ #define ZPOOL_CONFIG_ERRATA "errata" /* not stored on disk */ #define ZPOOL_CONFIG_VDEV_ROOT_ZAP "com.klarasystems:vdev_zap_root" #define ZPOOL_CONFIG_VDEV_TOP_ZAP "com.delphix:vdev_zap_top" #define ZPOOL_CONFIG_VDEV_LEAF_ZAP "com.delphix:vdev_zap_leaf" #define ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS "com.delphix:has_per_vdev_zaps" #define ZPOOL_CONFIG_RESILVER_DEFER "com.datto:resilver_defer" #define ZPOOL_CONFIG_CACHEFILE "cachefile" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_STATE "mmp_state" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_TXG "mmp_txg" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_SEQ "mmp_seq" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_HOSTNAME "mmp_hostname" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_HOSTID "mmp_hostid" /* not stored on disk */ #define ZPOOL_CONFIG_ALLOCATION_BIAS "alloc_bias" /* not stored on disk */ #define ZPOOL_CONFIG_EXPANSION_TIME "expansion_time" /* not stored */ #define ZPOOL_CONFIG_REBUILD_STATS "org.openzfs:rebuild_stats" #define ZPOOL_CONFIG_COMPATIBILITY "compatibility" /* * The persistent vdev state is stored as separate values rather than a single * 'vdev_state' entry. This is because a device can be in multiple states, such * as offline and degraded. */ #define ZPOOL_CONFIG_OFFLINE "offline" #define ZPOOL_CONFIG_FAULTED "faulted" #define ZPOOL_CONFIG_DEGRADED "degraded" #define ZPOOL_CONFIG_REMOVED "removed" #define ZPOOL_CONFIG_FRU "fru" #define ZPOOL_CONFIG_AUX_STATE "aux_state" /* Pool load policy parameters */ #define ZPOOL_LOAD_POLICY "load-policy" #define ZPOOL_LOAD_REWIND_POLICY "load-rewind-policy" #define ZPOOL_LOAD_REQUEST_TXG "load-request-txg" #define ZPOOL_LOAD_META_THRESH "load-meta-thresh" #define ZPOOL_LOAD_DATA_THRESH "load-data-thresh" /* Rewind data discovered */ #define ZPOOL_CONFIG_LOAD_TIME "rewind_txg_ts" #define ZPOOL_CONFIG_LOAD_META_ERRORS "verify_meta_errors" #define ZPOOL_CONFIG_LOAD_DATA_ERRORS "verify_data_errors" #define ZPOOL_CONFIG_REWIND_TIME "seconds_of_rewind" /* dRAID configuration */ #define ZPOOL_CONFIG_DRAID_NDATA "draid_ndata" #define ZPOOL_CONFIG_DRAID_NSPARES "draid_nspares" #define ZPOOL_CONFIG_DRAID_NGROUPS "draid_ngroups" #define VDEV_TYPE_ROOT "root" #define VDEV_TYPE_MIRROR "mirror" #define VDEV_TYPE_REPLACING "replacing" #define VDEV_TYPE_RAIDZ "raidz" #define VDEV_TYPE_DRAID "draid" #define VDEV_TYPE_DRAID_SPARE "dspare" #define VDEV_TYPE_DISK "disk" #define VDEV_TYPE_FILE "file" #define VDEV_TYPE_MISSING "missing" #define VDEV_TYPE_HOLE "hole" #define VDEV_TYPE_SPARE "spare" #define VDEV_TYPE_LOG "log" #define VDEV_TYPE_L2CACHE "l2cache" #define VDEV_TYPE_INDIRECT "indirect" #define VDEV_RAIDZ_MAXPARITY 3 #define VDEV_DRAID_MAXPARITY 3 #define VDEV_DRAID_MIN_CHILDREN 2 #define VDEV_DRAID_MAX_CHILDREN UINT8_MAX /* VDEV_TOP_ZAP_* are used in top-level vdev ZAP objects. */ #define VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM \ "com.delphix:indirect_obsolete_sm" #define VDEV_TOP_ZAP_OBSOLETE_COUNTS_ARE_PRECISE \ "com.delphix:obsolete_counts_are_precise" #define VDEV_TOP_ZAP_POOL_CHECKPOINT_SM \ "com.delphix:pool_checkpoint_sm" #define VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS \ "com.delphix:ms_unflushed_phys_txgs" #define VDEV_TOP_ZAP_VDEV_REBUILD_PHYS \ "org.openzfs:vdev_rebuild" #define VDEV_TOP_ZAP_ALLOCATION_BIAS \ "org.zfsonlinux:allocation_bias" #define VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE \ "org.openzfs:raidz_expand_state" #define VDEV_TOP_ZAP_RAIDZ_EXPAND_START_TIME \ "org.openzfs:raidz_expand_start_time" #define VDEV_TOP_ZAP_RAIDZ_EXPAND_END_TIME \ "org.openzfs:raidz_expand_end_time" #define VDEV_TOP_ZAP_RAIDZ_EXPAND_BYTES_COPIED \ "org.openzfs:raidz_expand_bytes_copied" /* vdev metaslab allocation bias */ #define VDEV_ALLOC_BIAS_LOG "log" #define VDEV_ALLOC_BIAS_SPECIAL "special" #define VDEV_ALLOC_BIAS_DEDUP "dedup" /* vdev initialize state */ #define VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET \ "com.delphix:next_offset_to_initialize" #define VDEV_LEAF_ZAP_INITIALIZE_STATE \ "com.delphix:vdev_initialize_state" #define VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME \ "com.delphix:vdev_initialize_action_time" /* vdev TRIM state */ #define VDEV_LEAF_ZAP_TRIM_LAST_OFFSET \ "org.zfsonlinux:next_offset_to_trim" #define VDEV_LEAF_ZAP_TRIM_STATE \ "org.zfsonlinux:vdev_trim_state" #define VDEV_LEAF_ZAP_TRIM_ACTION_TIME \ "org.zfsonlinux:vdev_trim_action_time" #define VDEV_LEAF_ZAP_TRIM_RATE \ "org.zfsonlinux:vdev_trim_rate" #define VDEV_LEAF_ZAP_TRIM_PARTIAL \ "org.zfsonlinux:vdev_trim_partial" #define VDEV_LEAF_ZAP_TRIM_SECURE \ "org.zfsonlinux:vdev_trim_secure" /* * This is needed in userland to report the minimum necessary device size. */ #define SPA_MINDEVSIZE (64ULL << 20) /* * Set if the fragmentation has not yet been calculated. This can happen * because the space maps have not been upgraded or the histogram feature * is not enabled. */ #define ZFS_FRAG_INVALID UINT64_MAX /* * The location of the pool configuration repository, shared between kernel and * userland. */ #define ZPOOL_CACHE_BOOT "/boot/zfs/zpool.cache" #define ZPOOL_CACHE "/etc/zfs/zpool.cache" /* * Settings for zpool compatibility features files */ #define ZPOOL_SYSCONF_COMPAT_D SYSCONFDIR "/zfs/compatibility.d" #define ZPOOL_DATA_COMPAT_D PKGDATADIR "/compatibility.d" #define ZPOOL_COMPAT_MAXSIZE 16384 /* * Hard-wired compatibility settings */ #define ZPOOL_COMPAT_LEGACY "legacy" #define ZPOOL_COMPAT_OFF "off" /* * vdev states are ordered from least to most healthy. * A vdev that's CANT_OPEN or below is considered unusable. */ typedef enum vdev_state { VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */ VDEV_STATE_CLOSED, /* Not currently open */ VDEV_STATE_OFFLINE, /* Not allowed to open */ VDEV_STATE_REMOVED, /* Explicitly removed from system */ VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */ VDEV_STATE_FAULTED, /* External request to fault device */ VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */ VDEV_STATE_HEALTHY /* Presumed good */ } vdev_state_t; #define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY /* * vdev aux states. When a vdev is in the CANT_OPEN state, the aux field * of the vdev stats structure uses these constants to distinguish why. */ typedef enum vdev_aux { VDEV_AUX_NONE, /* no error */ VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */ VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */ VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */ VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */ VDEV_AUX_TOO_SMALL, /* vdev size is too small */ VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */ VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */ VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */ VDEV_AUX_UNSUP_FEAT, /* unsupported features */ VDEV_AUX_SPARED, /* hot spare used in another pool */ VDEV_AUX_ERR_EXCEEDED, /* too many errors */ VDEV_AUX_IO_FAILURE, /* experienced I/O failure */ VDEV_AUX_BAD_LOG, /* cannot read log chain(s) */ VDEV_AUX_EXTERNAL, /* external diagnosis or forced fault */ VDEV_AUX_SPLIT_POOL, /* vdev was split off into another pool */ VDEV_AUX_BAD_ASHIFT, /* vdev ashift is invalid */ VDEV_AUX_EXTERNAL_PERSIST, /* persistent forced fault */ VDEV_AUX_ACTIVE, /* vdev active on a different host */ VDEV_AUX_CHILDREN_OFFLINE, /* all children are offline */ VDEV_AUX_ASHIFT_TOO_BIG, /* vdev's min block size is too large */ } vdev_aux_t; /* * pool state. The following states are written to disk as part of the normal * SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE, L2CACHE. The remaining * states are software abstractions used at various levels to communicate * pool state. */ typedef enum pool_state { POOL_STATE_ACTIVE = 0, /* In active use */ POOL_STATE_EXPORTED, /* Explicitly exported */ POOL_STATE_DESTROYED, /* Explicitly destroyed */ POOL_STATE_SPARE, /* Reserved for hot spare use */ POOL_STATE_L2CACHE, /* Level 2 ARC device */ POOL_STATE_UNINITIALIZED, /* Internal spa_t state */ POOL_STATE_UNAVAIL, /* Internal libzfs state */ POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */ } pool_state_t; /* * mmp state. The following states provide additional detail describing * why a pool couldn't be safely imported. */ typedef enum mmp_state { MMP_STATE_ACTIVE = 0, /* In active use */ MMP_STATE_INACTIVE, /* Inactive and safe to import */ MMP_STATE_NO_HOSTID /* System hostid is not set */ } mmp_state_t; /* * Scan Functions. */ typedef enum pool_scan_func { POOL_SCAN_NONE, POOL_SCAN_SCRUB, POOL_SCAN_RESILVER, POOL_SCAN_ERRORSCRUB, POOL_SCAN_FUNCS } pool_scan_func_t; /* * Used to control scrub pause and resume. */ typedef enum pool_scrub_cmd { POOL_SCRUB_NORMAL = 0, POOL_SCRUB_PAUSE, POOL_SCRUB_FLAGS_END } pool_scrub_cmd_t; typedef enum { CS_NONE, CS_CHECKPOINT_EXISTS, CS_CHECKPOINT_DISCARDING, CS_NUM_STATES } checkpoint_state_t; typedef struct pool_checkpoint_stat { uint64_t pcs_state; /* checkpoint_state_t */ uint64_t pcs_start_time; /* time checkpoint/discard started */ uint64_t pcs_space; /* checkpointed space */ } pool_checkpoint_stat_t; /* * ZIO types. Needed to interpret vdev statistics below. */ typedef enum zio_type { ZIO_TYPE_NULL = 0, ZIO_TYPE_READ, ZIO_TYPE_WRITE, ZIO_TYPE_FREE, ZIO_TYPE_CLAIM, ZIO_TYPE_FLUSH, ZIO_TYPE_TRIM, ZIO_TYPES } zio_type_t; /* * Compatibility: _IOCTL was renamed to _FLUSH; keep the old name available to * user programs. */ #define ZIO_TYPE_IOCTL ZIO_TYPE_FLUSH /* * Pool statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct pool_scan_stat { /* values stored on disk */ uint64_t pss_func; /* pool_scan_func_t */ uint64_t pss_state; /* dsl_scan_state_t */ uint64_t pss_start_time; /* scan start time */ uint64_t pss_end_time; /* scan end time */ uint64_t pss_to_examine; /* total bytes to scan */ uint64_t pss_examined; /* total bytes located by scanner */ uint64_t pss_skipped; /* total bytes skipped by scanner */ uint64_t pss_processed; /* total processed bytes */ uint64_t pss_errors; /* scan errors */ /* values not stored on disk */ uint64_t pss_pass_exam; /* examined bytes per scan pass */ uint64_t pss_pass_start; /* start time of a scan pass */ uint64_t pss_pass_scrub_pause; /* pause time of a scrub pass */ /* cumulative time scrub spent paused, needed for rate calculation */ uint64_t pss_pass_scrub_spent_paused; uint64_t pss_pass_issued; /* issued bytes per scan pass */ uint64_t pss_issued; /* total bytes checked by scanner */ /* error scrub values stored on disk */ uint64_t pss_error_scrub_func; /* pool_scan_func_t */ uint64_t pss_error_scrub_state; /* dsl_scan_state_t */ uint64_t pss_error_scrub_start; /* error scrub start time */ uint64_t pss_error_scrub_end; /* error scrub end time */ uint64_t pss_error_scrub_examined; /* error blocks issued I/O */ /* error blocks to be issued I/O */ uint64_t pss_error_scrub_to_be_examined; /* error scrub values not stored on disk */ /* error scrub pause time in milliseconds */ uint64_t pss_pass_error_scrub_pause; } pool_scan_stat_t; typedef struct pool_removal_stat { uint64_t prs_state; /* dsl_scan_state_t */ uint64_t prs_removing_vdev; uint64_t prs_start_time; uint64_t prs_end_time; uint64_t prs_to_copy; /* bytes that need to be copied */ uint64_t prs_copied; /* bytes copied so far */ /* * bytes of memory used for indirect mappings. * This includes all removed vdevs. */ uint64_t prs_mapping_memory; } pool_removal_stat_t; typedef struct pool_raidz_expand_stat { uint64_t pres_state; /* dsl_scan_state_t */ uint64_t pres_expanding_vdev; uint64_t pres_start_time; uint64_t pres_end_time; uint64_t pres_to_reflow; /* bytes that need to be moved */ uint64_t pres_reflowed; /* bytes moved so far */ uint64_t pres_waiting_for_resilver; } pool_raidz_expand_stat_t; typedef enum dsl_scan_state { DSS_NONE, DSS_SCANNING, DSS_FINISHED, DSS_CANCELED, DSS_ERRORSCRUBBING, DSS_NUM_STATES } dsl_scan_state_t; typedef struct vdev_rebuild_stat { uint64_t vrs_state; /* vdev_rebuild_state_t */ uint64_t vrs_start_time; /* time_t */ uint64_t vrs_end_time; /* time_t */ uint64_t vrs_scan_time_ms; /* total run time (millisecs) */ uint64_t vrs_bytes_scanned; /* allocated bytes scanned */ uint64_t vrs_bytes_issued; /* read bytes issued */ uint64_t vrs_bytes_rebuilt; /* rebuilt bytes */ uint64_t vrs_bytes_est; /* total bytes to scan */ uint64_t vrs_errors; /* scanning errors */ uint64_t vrs_pass_time_ms; /* pass run time (millisecs) */ uint64_t vrs_pass_bytes_scanned; /* bytes scanned since start/resume */ uint64_t vrs_pass_bytes_issued; /* bytes rebuilt since start/resume */ uint64_t vrs_pass_bytes_skipped; /* bytes skipped since start/resume */ } vdev_rebuild_stat_t; /* * Errata described by https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-ER. * The ordering of this enum must be maintained to ensure the errata identifiers * map to the correct documentation. New errata may only be appended to the * list and must contain corresponding documentation at the above link. */ typedef enum zpool_errata { ZPOOL_ERRATA_NONE, ZPOOL_ERRATA_ZOL_2094_SCRUB, ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY, ZPOOL_ERRATA_ZOL_6845_ENCRYPTION, ZPOOL_ERRATA_ZOL_8308_ENCRYPTION, } zpool_errata_t; /* * Vdev statistics. Note: all fields should be 64-bit because this * is passed between kernel and user land as an nvlist uint64 array. * * The vs_ops[] and vs_bytes[] arrays must always be an array size of 6 in * order to keep subsequent members at their known fixed offsets. When * adding a new field it must be added to the end the structure. */ #define VS_ZIO_TYPES 6 typedef struct vdev_stat { hrtime_t vs_timestamp; /* time since vdev load */ uint64_t vs_state; /* vdev state */ uint64_t vs_aux; /* see vdev_aux_t */ uint64_t vs_alloc; /* space allocated */ uint64_t vs_space; /* total capacity */ uint64_t vs_dspace; /* deflated capacity */ uint64_t vs_rsize; /* replaceable dev size */ uint64_t vs_esize; /* expandable dev size */ uint64_t vs_ops[VS_ZIO_TYPES]; /* operation count */ uint64_t vs_bytes[VS_ZIO_TYPES]; /* bytes read/written */ uint64_t vs_read_errors; /* read errors */ uint64_t vs_write_errors; /* write errors */ uint64_t vs_checksum_errors; /* checksum errors */ uint64_t vs_initialize_errors; /* initializing errors */ uint64_t vs_self_healed; /* self-healed bytes */ uint64_t vs_scan_removing; /* removing? */ uint64_t vs_scan_processed; /* scan processed bytes */ uint64_t vs_fragmentation; /* device fragmentation */ uint64_t vs_initialize_bytes_done; /* bytes initialized */ uint64_t vs_initialize_bytes_est; /* total bytes to initialize */ uint64_t vs_initialize_state; /* vdev_initializing_state_t */ uint64_t vs_initialize_action_time; /* time_t */ uint64_t vs_checkpoint_space; /* checkpoint-consumed space */ uint64_t vs_resilver_deferred; /* resilver deferred */ uint64_t vs_slow_ios; /* slow IOs */ uint64_t vs_trim_errors; /* trimming errors */ uint64_t vs_trim_notsup; /* supported by device */ uint64_t vs_trim_bytes_done; /* bytes trimmed */ uint64_t vs_trim_bytes_est; /* total bytes to trim */ uint64_t vs_trim_state; /* vdev_trim_state_t */ uint64_t vs_trim_action_time; /* time_t */ uint64_t vs_rebuild_processed; /* bytes rebuilt */ uint64_t vs_configured_ashift; /* TLV vdev_ashift */ uint64_t vs_logical_ashift; /* vdev_logical_ashift */ uint64_t vs_physical_ashift; /* vdev_physical_ashift */ uint64_t vs_noalloc; /* allocations halted? */ uint64_t vs_pspace; /* physical capacity */ } vdev_stat_t; #define VDEV_STAT_VALID(field, uint64_t_field_count) \ ((uint64_t_field_count * sizeof (uint64_t)) >= \ (offsetof(vdev_stat_t, field) + sizeof (((vdev_stat_t *)NULL)->field))) /* * Extended stats * * These are stats which aren't included in the original iostat output. For * convenience, they are grouped together in vdev_stat_ex, although each stat * is individually exported as an nvlist. */ typedef struct vdev_stat_ex { /* Number of ZIOs issued to disk and waiting to finish */ uint64_t vsx_active_queue[ZIO_PRIORITY_NUM_QUEUEABLE]; /* Number of ZIOs pending to be issued to disk */ uint64_t vsx_pend_queue[ZIO_PRIORITY_NUM_QUEUEABLE]; /* * Below are the histograms for various latencies. Buckets are in * units of nanoseconds. */ /* * 2^37 nanoseconds = 134s. Timeouts will probably start kicking in * before this. */ #define VDEV_L_HISTO_BUCKETS 37 /* Latency histo buckets */ #define VDEV_RQ_HISTO_BUCKETS 25 /* Request size histo buckets */ /* Amount of time in ZIO queue (ns) */ uint64_t vsx_queue_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_L_HISTO_BUCKETS]; /* Total ZIO latency (ns). Includes queuing and disk access time */ uint64_t vsx_total_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS]; /* Amount of time to read/write the disk (ns) */ uint64_t vsx_disk_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS]; /* "lookup the bucket for a value" histogram macros */ #define HISTO(val, buckets) (val != 0 ? MIN(highbit64(val) - 1, \ buckets - 1) : 0) #define L_HISTO(a) HISTO(a, VDEV_L_HISTO_BUCKETS) #define RQ_HISTO(a) HISTO(a, VDEV_RQ_HISTO_BUCKETS) /* Physical IO histogram */ uint64_t vsx_ind_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_RQ_HISTO_BUCKETS]; /* Delegated (aggregated) physical IO histogram */ uint64_t vsx_agg_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_RQ_HISTO_BUCKETS]; } vdev_stat_ex_t; /* * Initialize functions. */ typedef enum pool_initialize_func { POOL_INITIALIZE_START, POOL_INITIALIZE_CANCEL, POOL_INITIALIZE_SUSPEND, POOL_INITIALIZE_UNINIT, POOL_INITIALIZE_FUNCS } pool_initialize_func_t; /* * TRIM functions. */ typedef enum pool_trim_func { POOL_TRIM_START, POOL_TRIM_CANCEL, POOL_TRIM_SUSPEND, POOL_TRIM_FUNCS } pool_trim_func_t; /* * DDT statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct ddt_object { uint64_t ddo_count; /* number of elements in ddt */ uint64_t ddo_dspace; /* size of ddt on disk */ uint64_t ddo_mspace; /* size of ddt in-core */ } ddt_object_t; typedef struct ddt_stat { uint64_t dds_blocks; /* blocks */ uint64_t dds_lsize; /* logical size */ uint64_t dds_psize; /* physical size */ uint64_t dds_dsize; /* deflated allocated size */ uint64_t dds_ref_blocks; /* referenced blocks */ uint64_t dds_ref_lsize; /* referenced lsize * refcnt */ uint64_t dds_ref_psize; /* referenced psize * refcnt */ uint64_t dds_ref_dsize; /* referenced dsize * refcnt */ } ddt_stat_t; typedef struct ddt_histogram { ddt_stat_t ddh_stat[64]; /* power-of-two histogram buckets */ } ddt_histogram_t; #define ZVOL_DRIVER "zvol" #define ZFS_DRIVER "zfs" #define ZFS_DEV "/dev/zfs" #define ZFS_DEVDIR "/dev" #define ZFS_SUPER_MAGIC 0x2fc12fc1 /* general zvol path */ #define ZVOL_DIR "/dev/zvol/" #define ZVOL_MAJOR 230 #define ZVOL_MINOR_BITS 4 #define ZVOL_MINOR_MASK ((1U << ZVOL_MINOR_BITS) - 1) #define ZVOL_MINORS (1 << 4) #define ZVOL_DEV_NAME "zd" #define ZVOL_PROP_NAME "name" #define ZVOL_DEFAULT_BLOCKSIZE 16384 typedef enum { VDEV_INITIALIZE_NONE, VDEV_INITIALIZE_ACTIVE, VDEV_INITIALIZE_CANCELED, VDEV_INITIALIZE_SUSPENDED, VDEV_INITIALIZE_COMPLETE } vdev_initializing_state_t; typedef enum { VDEV_TRIM_NONE, VDEV_TRIM_ACTIVE, VDEV_TRIM_CANCELED, VDEV_TRIM_SUSPENDED, VDEV_TRIM_COMPLETE, } vdev_trim_state_t; typedef enum { VDEV_REBUILD_NONE, VDEV_REBUILD_ACTIVE, VDEV_REBUILD_CANCELED, VDEV_REBUILD_COMPLETE, } vdev_rebuild_state_t; /* * nvlist name constants. Facilitate restricting snapshot iteration range for * the "list next snapshot" ioctl */ #define SNAP_ITER_MIN_TXG "snap_iter_min_txg" #define SNAP_ITER_MAX_TXG "snap_iter_max_txg" /* * /dev/zfs ioctl numbers. * * These numbers cannot change over time. New ioctl numbers must be appended. */ typedef enum zfs_ioc { /* * Core features - 88/128 numbers reserved. */ #ifdef __FreeBSD__ ZFS_IOC_FIRST = 0, #else ZFS_IOC_FIRST = ('Z' << 8), #endif ZFS_IOC = ZFS_IOC_FIRST, ZFS_IOC_POOL_CREATE = ZFS_IOC_FIRST, /* 0x5a00 */ ZFS_IOC_POOL_DESTROY, /* 0x5a01 */ ZFS_IOC_POOL_IMPORT, /* 0x5a02 */ ZFS_IOC_POOL_EXPORT, /* 0x5a03 */ ZFS_IOC_POOL_CONFIGS, /* 0x5a04 */ ZFS_IOC_POOL_STATS, /* 0x5a05 */ ZFS_IOC_POOL_TRYIMPORT, /* 0x5a06 */ ZFS_IOC_POOL_SCAN, /* 0x5a07 */ ZFS_IOC_POOL_FREEZE, /* 0x5a08 */ ZFS_IOC_POOL_UPGRADE, /* 0x5a09 */ ZFS_IOC_POOL_GET_HISTORY, /* 0x5a0a */ ZFS_IOC_VDEV_ADD, /* 0x5a0b */ ZFS_IOC_VDEV_REMOVE, /* 0x5a0c */ ZFS_IOC_VDEV_SET_STATE, /* 0x5a0d */ ZFS_IOC_VDEV_ATTACH, /* 0x5a0e */ ZFS_IOC_VDEV_DETACH, /* 0x5a0f */ ZFS_IOC_VDEV_SETPATH, /* 0x5a10 */ ZFS_IOC_VDEV_SETFRU, /* 0x5a11 */ ZFS_IOC_OBJSET_STATS, /* 0x5a12 */ ZFS_IOC_OBJSET_ZPLPROPS, /* 0x5a13 */ ZFS_IOC_DATASET_LIST_NEXT, /* 0x5a14 */ ZFS_IOC_SNAPSHOT_LIST_NEXT, /* 0x5a15 */ ZFS_IOC_SET_PROP, /* 0x5a16 */ ZFS_IOC_CREATE, /* 0x5a17 */ ZFS_IOC_DESTROY, /* 0x5a18 */ ZFS_IOC_ROLLBACK, /* 0x5a19 */ ZFS_IOC_RENAME, /* 0x5a1a */ ZFS_IOC_RECV, /* 0x5a1b */ ZFS_IOC_SEND, /* 0x5a1c */ ZFS_IOC_INJECT_FAULT, /* 0x5a1d */ ZFS_IOC_CLEAR_FAULT, /* 0x5a1e */ ZFS_IOC_INJECT_LIST_NEXT, /* 0x5a1f */ ZFS_IOC_ERROR_LOG, /* 0x5a20 */ ZFS_IOC_CLEAR, /* 0x5a21 */ ZFS_IOC_PROMOTE, /* 0x5a22 */ ZFS_IOC_SNAPSHOT, /* 0x5a23 */ ZFS_IOC_DSOBJ_TO_DSNAME, /* 0x5a24 */ ZFS_IOC_OBJ_TO_PATH, /* 0x5a25 */ ZFS_IOC_POOL_SET_PROPS, /* 0x5a26 */ ZFS_IOC_POOL_GET_PROPS, /* 0x5a27 */ ZFS_IOC_SET_FSACL, /* 0x5a28 */ ZFS_IOC_GET_FSACL, /* 0x5a29 */ ZFS_IOC_SHARE, /* 0x5a2a */ ZFS_IOC_INHERIT_PROP, /* 0x5a2b */ ZFS_IOC_SMB_ACL, /* 0x5a2c */ ZFS_IOC_USERSPACE_ONE, /* 0x5a2d */ ZFS_IOC_USERSPACE_MANY, /* 0x5a2e */ ZFS_IOC_USERSPACE_UPGRADE, /* 0x5a2f */ ZFS_IOC_HOLD, /* 0x5a30 */ ZFS_IOC_RELEASE, /* 0x5a31 */ ZFS_IOC_GET_HOLDS, /* 0x5a32 */ ZFS_IOC_OBJSET_RECVD_PROPS, /* 0x5a33 */ ZFS_IOC_VDEV_SPLIT, /* 0x5a34 */ ZFS_IOC_NEXT_OBJ, /* 0x5a35 */ ZFS_IOC_DIFF, /* 0x5a36 */ ZFS_IOC_TMP_SNAPSHOT, /* 0x5a37 */ ZFS_IOC_OBJ_TO_STATS, /* 0x5a38 */ ZFS_IOC_SPACE_WRITTEN, /* 0x5a39 */ ZFS_IOC_SPACE_SNAPS, /* 0x5a3a */ ZFS_IOC_DESTROY_SNAPS, /* 0x5a3b */ ZFS_IOC_POOL_REGUID, /* 0x5a3c */ ZFS_IOC_POOL_REOPEN, /* 0x5a3d */ ZFS_IOC_SEND_PROGRESS, /* 0x5a3e */ ZFS_IOC_LOG_HISTORY, /* 0x5a3f */ ZFS_IOC_SEND_NEW, /* 0x5a40 */ ZFS_IOC_SEND_SPACE, /* 0x5a41 */ ZFS_IOC_CLONE, /* 0x5a42 */ ZFS_IOC_BOOKMARK, /* 0x5a43 */ ZFS_IOC_GET_BOOKMARKS, /* 0x5a44 */ ZFS_IOC_DESTROY_BOOKMARKS, /* 0x5a45 */ ZFS_IOC_RECV_NEW, /* 0x5a46 */ ZFS_IOC_POOL_SYNC, /* 0x5a47 */ ZFS_IOC_CHANNEL_PROGRAM, /* 0x5a48 */ ZFS_IOC_LOAD_KEY, /* 0x5a49 */ ZFS_IOC_UNLOAD_KEY, /* 0x5a4a */ ZFS_IOC_CHANGE_KEY, /* 0x5a4b */ ZFS_IOC_REMAP, /* 0x5a4c */ ZFS_IOC_POOL_CHECKPOINT, /* 0x5a4d */ ZFS_IOC_POOL_DISCARD_CHECKPOINT, /* 0x5a4e */ ZFS_IOC_POOL_INITIALIZE, /* 0x5a4f */ ZFS_IOC_POOL_TRIM, /* 0x5a50 */ ZFS_IOC_REDACT, /* 0x5a51 */ ZFS_IOC_GET_BOOKMARK_PROPS, /* 0x5a52 */ ZFS_IOC_WAIT, /* 0x5a53 */ ZFS_IOC_WAIT_FS, /* 0x5a54 */ ZFS_IOC_VDEV_GET_PROPS, /* 0x5a55 */ ZFS_IOC_VDEV_SET_PROPS, /* 0x5a56 */ ZFS_IOC_POOL_SCRUB, /* 0x5a57 */ /* * Per-platform (Optional) - 8/128 numbers reserved. */ ZFS_IOC_PLATFORM = ZFS_IOC_FIRST + 0x80, ZFS_IOC_EVENTS_NEXT, /* 0x81 (Linux) */ ZFS_IOC_EVENTS_CLEAR, /* 0x82 (Linux) */ ZFS_IOC_EVENTS_SEEK, /* 0x83 (Linux) */ ZFS_IOC_NEXTBOOT, /* 0x84 (FreeBSD) */ ZFS_IOC_JAIL, /* 0x85 (FreeBSD) */ ZFS_IOC_USERNS_ATTACH = ZFS_IOC_JAIL, /* 0x85 (Linux) */ ZFS_IOC_UNJAIL, /* 0x86 (FreeBSD) */ ZFS_IOC_USERNS_DETACH = ZFS_IOC_UNJAIL, /* 0x86 (Linux) */ ZFS_IOC_SET_BOOTENV, /* 0x87 */ ZFS_IOC_GET_BOOTENV, /* 0x88 */ ZFS_IOC_LAST } zfs_ioc_t; /* * zvol ioctl to get dataset name */ #define BLKZNAME _IOR(0x12, 125, char[ZFS_MAX_DATASET_NAME_LEN]) #ifdef __linux__ /* * IOCTLs to update and retrieve additional file level attributes on * Linux. */ #define ZFS_IOC_GETDOSFLAGS _IOR(0x83, 1, uint64_t) #define ZFS_IOC_SETDOSFLAGS _IOW(0x83, 2, uint64_t) /* * Additional file level attributes, that are stored * in the upper half of z_pflags */ #define ZFS_READONLY 0x0000000100000000ull #define ZFS_HIDDEN 0x0000000200000000ull #define ZFS_SYSTEM 0x0000000400000000ull #define ZFS_ARCHIVE 0x0000000800000000ull #define ZFS_IMMUTABLE 0x0000001000000000ull #define ZFS_NOUNLINK 0x0000002000000000ull #define ZFS_APPENDONLY 0x0000004000000000ull #define ZFS_NODUMP 0x0000008000000000ull #define ZFS_OPAQUE 0x0000010000000000ull #define ZFS_AV_QUARANTINED 0x0000020000000000ull #define ZFS_AV_MODIFIED 0x0000040000000000ull #define ZFS_REPARSE 0x0000080000000000ull #define ZFS_OFFLINE 0x0000100000000000ull #define ZFS_SPARSE 0x0000200000000000ull #define ZFS_DOS_FL_USER_VISIBLE (ZFS_IMMUTABLE | ZFS_APPENDONLY | \ ZFS_NOUNLINK | ZFS_ARCHIVE | ZFS_NODUMP | ZFS_SYSTEM | \ ZFS_HIDDEN | ZFS_READONLY | ZFS_REPARSE | ZFS_OFFLINE | \ ZFS_SPARSE) #endif /* * ZFS-specific error codes used for returning descriptive errors * to the userland through zfs ioctls. * * The enum implicitly includes all the error codes from errno.h. * New code should use and extend this enum for errors that are * not described precisely by generic errno codes. * * These numbers should not change over time. New entries should be appended. * * (Keep in sync with contrib/pyzfs/libzfs_core/_constants.py) */ typedef enum { ZFS_ERR_CHECKPOINT_EXISTS = 1024, ZFS_ERR_DISCARDING_CHECKPOINT, ZFS_ERR_NO_CHECKPOINT, ZFS_ERR_DEVRM_IN_PROGRESS, ZFS_ERR_VDEV_TOO_BIG, ZFS_ERR_IOC_CMD_UNAVAIL, ZFS_ERR_IOC_ARG_UNAVAIL, ZFS_ERR_IOC_ARG_REQUIRED, ZFS_ERR_IOC_ARG_BADTYPE, ZFS_ERR_WRONG_PARENT, ZFS_ERR_FROM_IVSET_GUID_MISSING, ZFS_ERR_FROM_IVSET_GUID_MISMATCH, ZFS_ERR_SPILL_BLOCK_FLAG_MISSING, ZFS_ERR_UNKNOWN_SEND_STREAM_FEATURE, ZFS_ERR_EXPORT_IN_PROGRESS, ZFS_ERR_BOOKMARK_SOURCE_NOT_ANCESTOR, ZFS_ERR_STREAM_TRUNCATED, ZFS_ERR_STREAM_LARGE_BLOCK_MISMATCH, ZFS_ERR_RESILVER_IN_PROGRESS, ZFS_ERR_REBUILD_IN_PROGRESS, ZFS_ERR_BADPROP, ZFS_ERR_VDEV_NOTSUP, ZFS_ERR_NOT_USER_NAMESPACE, ZFS_ERR_RESUME_EXISTS, ZFS_ERR_CRYPTO_NOTSUP, ZFS_ERR_RAIDZ_EXPAND_IN_PROGRESS, ZFS_ERR_ASHIFT_MISMATCH, } zfs_errno_t; /* * Internal SPA load state. Used by FMA diagnosis engine. */ typedef enum { SPA_LOAD_NONE, /* no load in progress */ SPA_LOAD_OPEN, /* normal open */ SPA_LOAD_IMPORT, /* import in progress */ SPA_LOAD_TRYIMPORT, /* tryimport in progress */ SPA_LOAD_RECOVER, /* recovery requested */ SPA_LOAD_ERROR, /* load failed */ SPA_LOAD_CREATE /* creation in progress */ } spa_load_state_t; typedef enum { ZPOOL_WAIT_CKPT_DISCARD, ZPOOL_WAIT_FREE, ZPOOL_WAIT_INITIALIZE, ZPOOL_WAIT_REPLACE, ZPOOL_WAIT_REMOVE, ZPOOL_WAIT_RESILVER, ZPOOL_WAIT_SCRUB, ZPOOL_WAIT_TRIM, ZPOOL_WAIT_RAIDZ_EXPAND, ZPOOL_WAIT_NUM_ACTIVITIES } zpool_wait_activity_t; typedef enum { ZFS_WAIT_DELETEQ, ZFS_WAIT_NUM_ACTIVITIES } zfs_wait_activity_t; /* * Bookmark name values. */ #define ZPOOL_ERR_LIST "error list" #define ZPOOL_ERR_DATASET "dataset" #define ZPOOL_ERR_OBJECT "object" #define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1) /* * The following are names used in the nvlist describing * the pool's history log. */ #define ZPOOL_HIST_RECORD "history record" #define ZPOOL_HIST_TIME "history time" #define ZPOOL_HIST_CMD "history command" #define ZPOOL_HIST_WHO "history who" #define ZPOOL_HIST_ZONE "history zone" #define ZPOOL_HIST_HOST "history hostname" #define ZPOOL_HIST_TXG "history txg" #define ZPOOL_HIST_INT_EVENT "history internal event" #define ZPOOL_HIST_INT_STR "history internal str" #define ZPOOL_HIST_INT_NAME "internal_name" #define ZPOOL_HIST_IOCTL "ioctl" #define ZPOOL_HIST_INPUT_NVL "in_nvl" #define ZPOOL_HIST_OUTPUT_NVL "out_nvl" #define ZPOOL_HIST_OUTPUT_SIZE "out_size" #define ZPOOL_HIST_DSNAME "dsname" #define ZPOOL_HIST_DSID "dsid" #define ZPOOL_HIST_ERRNO "errno" #define ZPOOL_HIST_ELAPSED_NS "elapsed_ns" /* * Special nvlist name that will not have its args recorded in the pool's * history log. */ #define ZPOOL_HIDDEN_ARGS "hidden_args" /* * The following are names used when invoking ZFS_IOC_POOL_INITIALIZE. */ #define ZPOOL_INITIALIZE_COMMAND "initialize_command" #define ZPOOL_INITIALIZE_VDEVS "initialize_vdevs" /* * The following are names used when invoking ZFS_IOC_POOL_TRIM. */ #define ZPOOL_TRIM_COMMAND "trim_command" #define ZPOOL_TRIM_VDEVS "trim_vdevs" #define ZPOOL_TRIM_RATE "trim_rate" #define ZPOOL_TRIM_SECURE "trim_secure" /* * The following are names used when invoking ZFS_IOC_POOL_WAIT. */ #define ZPOOL_WAIT_ACTIVITY "wait_activity" #define ZPOOL_WAIT_TAG "wait_tag" #define ZPOOL_WAIT_WAITED "wait_waited" /* * The following are names used when invoking ZFS_IOC_VDEV_GET_PROP. */ #define ZPOOL_VDEV_PROPS_GET_VDEV "vdevprops_get_vdev" #define ZPOOL_VDEV_PROPS_GET_PROPS "vdevprops_get_props" /* * The following are names used when invoking ZFS_IOC_VDEV_SET_PROP. */ #define ZPOOL_VDEV_PROPS_SET_VDEV "vdevprops_set_vdev" #define ZPOOL_VDEV_PROPS_SET_PROPS "vdevprops_set_props" /* * The following are names used when invoking ZFS_IOC_WAIT_FS. */ #define ZFS_WAIT_ACTIVITY "wait_activity" #define ZFS_WAIT_WAITED "wait_waited" /* * Flags for ZFS_IOC_VDEV_SET_STATE */ #define ZFS_ONLINE_CHECKREMOVE 0x1 #define ZFS_ONLINE_UNSPARE 0x2 #define ZFS_ONLINE_FORCEFAULT 0x4 #define ZFS_ONLINE_EXPAND 0x8 #define ZFS_ONLINE_SPARE 0x10 #define ZFS_OFFLINE_TEMPORARY 0x1 /* * Flags for ZFS_IOC_POOL_IMPORT */ #define ZFS_IMPORT_NORMAL 0x0 #define ZFS_IMPORT_VERBATIM 0x1 #define ZFS_IMPORT_ANY_HOST 0x2 #define ZFS_IMPORT_MISSING_LOG 0x4 #define ZFS_IMPORT_ONLY 0x8 #define ZFS_IMPORT_TEMP_NAME 0x10 #define ZFS_IMPORT_SKIP_MMP 0x20 #define ZFS_IMPORT_LOAD_KEYS 0x40 #define ZFS_IMPORT_CHECKPOINT 0x80 /* * Channel program argument/return nvlist keys and defaults. */ #define ZCP_ARG_PROGRAM "program" #define ZCP_ARG_ARGLIST "arg" #define ZCP_ARG_SYNC "sync" #define ZCP_ARG_INSTRLIMIT "instrlimit" #define ZCP_ARG_MEMLIMIT "memlimit" #define ZCP_ARG_CLIARGV "argv" #define ZCP_RET_ERROR "error" #define ZCP_RET_RETURN "return" #define ZCP_DEFAULT_INSTRLIMIT (10 * 1000 * 1000) #define ZCP_MAX_INSTRLIMIT (10 * ZCP_DEFAULT_INSTRLIMIT) #define ZCP_DEFAULT_MEMLIMIT (10 * 1024 * 1024) #define ZCP_MAX_MEMLIMIT (10 * ZCP_DEFAULT_MEMLIMIT) /* * Sysevent payload members. ZFS will generate the following sysevents with the * given payloads: * * ESC_ZFS_RESILVER_START * ESC_ZFS_RESILVER_FINISH * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_RESILVER_TYPE DATA_TYPE_STRING * * ESC_ZFS_POOL_DESTROY * ESC_ZFS_POOL_REGUID * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * * ESC_ZFS_VDEV_REMOVE * ESC_ZFS_VDEV_CLEAR * ESC_ZFS_VDEV_CHECK * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional) * ZFS_EV_VDEV_GUID DATA_TYPE_UINT64 * * ESC_ZFS_HISTORY_EVENT * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_HIST_TIME DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_CMD DATA_TYPE_STRING (optional) * ZFS_EV_HIST_WHO DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_ZONE DATA_TYPE_STRING (optional) * ZFS_EV_HIST_HOST DATA_TYPE_STRING (optional) * ZFS_EV_HIST_TXG DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_INT_EVENT DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_INT_STR DATA_TYPE_STRING (optional) * ZFS_EV_HIST_INT_NAME DATA_TYPE_STRING (optional) * ZFS_EV_HIST_IOCTL DATA_TYPE_STRING (optional) * ZFS_EV_HIST_DSNAME DATA_TYPE_STRING (optional) * ZFS_EV_HIST_DSID DATA_TYPE_UINT64 (optional) * * The ZFS_EV_HIST_* members will correspond to the ZPOOL_HIST_* members in the * history log nvlist. The keynames will be free of any spaces or other * characters that could be potentially unexpected to consumers of the * sysevents. */ #define ZFS_EV_POOL_NAME "pool_name" #define ZFS_EV_POOL_GUID "pool_guid" #define ZFS_EV_VDEV_PATH "vdev_path" #define ZFS_EV_VDEV_GUID "vdev_guid" #define ZFS_EV_HIST_TIME "history_time" #define ZFS_EV_HIST_CMD "history_command" #define ZFS_EV_HIST_WHO "history_who" #define ZFS_EV_HIST_ZONE "history_zone" #define ZFS_EV_HIST_HOST "history_hostname" #define ZFS_EV_HIST_TXG "history_txg" #define ZFS_EV_HIST_INT_EVENT "history_internal_event" #define ZFS_EV_HIST_INT_STR "history_internal_str" #define ZFS_EV_HIST_INT_NAME "history_internal_name" #define ZFS_EV_HIST_IOCTL "history_ioctl" #define ZFS_EV_HIST_DSNAME "history_dsname" #define ZFS_EV_HIST_DSID "history_dsid" #define ZFS_EV_RESILVER_TYPE "resilver_type" /* * We currently support block sizes from 512 bytes to 16MB. * The benefits of larger blocks, and thus larger IO, need to be weighed * against the cost of COWing a giant block to modify one byte, and the * large latency of reading or writing a large block. * * The recordsize property can not be set larger than zfs_max_recordsize * (default 16MB on 64-bit and 1MB on 32-bit). See the comment near * zfs_max_recordsize in dsl_dataset.c for details. * * Note that although the LSIZE field of the blkptr_t can store sizes up * to 32MB, the dnode's dn_datablkszsec can only store sizes up to * 32MB - 512 bytes. Therefore, we limit SPA_MAXBLOCKSIZE to 16MB. */ #define SPA_MINBLOCKSHIFT 9 #define SPA_OLD_MAXBLOCKSHIFT 17 #define SPA_MAXBLOCKSHIFT 24 #define SPA_MINBLOCKSIZE (1ULL << SPA_MINBLOCKSHIFT) #define SPA_OLD_MAXBLOCKSIZE (1ULL << SPA_OLD_MAXBLOCKSHIFT) #define SPA_MAXBLOCKSIZE (1ULL << SPA_MAXBLOCKSHIFT) /* supported encryption algorithms */ enum zio_encrypt { ZIO_CRYPT_INHERIT = 0, ZIO_CRYPT_ON, ZIO_CRYPT_OFF, ZIO_CRYPT_AES_128_CCM, ZIO_CRYPT_AES_192_CCM, ZIO_CRYPT_AES_256_CCM, ZIO_CRYPT_AES_128_GCM, ZIO_CRYPT_AES_192_GCM, ZIO_CRYPT_AES_256_GCM, ZIO_CRYPT_FUNCTIONS }; #define ZIO_CRYPT_ON_VALUE ZIO_CRYPT_AES_256_GCM #define ZIO_CRYPT_DEFAULT ZIO_CRYPT_OFF /* * xattr namespace prefixes. These are forbidden in xattr names. * * For cross-platform compatibility, xattrs in the user namespace should not be * prefixed with the namespace name, but for backwards compatibility with older * ZFS on Linux versions we do prefix the namespace. */ #define ZFS_XA_NS_FREEBSD_PREFIX "freebsd:" #define ZFS_XA_NS_FREEBSD_PREFIX_LEN strlen("freebsd:") #define ZFS_XA_NS_LINUX_SECURITY_PREFIX "security." #define ZFS_XA_NS_LINUX_SECURITY_PREFIX_LEN strlen("security.") #define ZFS_XA_NS_LINUX_SYSTEM_PREFIX "system." #define ZFS_XA_NS_LINUX_SYSTEM_PREFIX_LEN strlen("system.") #define ZFS_XA_NS_LINUX_TRUSTED_PREFIX "trusted." #define ZFS_XA_NS_LINUX_TRUSTED_PREFIX_LEN strlen("trusted.") #define ZFS_XA_NS_LINUX_USER_PREFIX "user." #define ZFS_XA_NS_LINUX_USER_PREFIX_LEN strlen("user.") #define ZFS_XA_NS_PREFIX_MATCH(ns, name) \ (strncmp(name, ZFS_XA_NS_##ns##_PREFIX, \ ZFS_XA_NS_##ns##_PREFIX_LEN) == 0) #define ZFS_XA_NS_PREFIX_FORBIDDEN(name) \ (ZFS_XA_NS_PREFIX_MATCH(FREEBSD, name) || \ ZFS_XA_NS_PREFIX_MATCH(LINUX_SECURITY, name) || \ ZFS_XA_NS_PREFIX_MATCH(LINUX_SYSTEM, name) || \ ZFS_XA_NS_PREFIX_MATCH(LINUX_TRUSTED, name) || \ ZFS_XA_NS_PREFIX_MATCH(LINUX_USER, name)) #ifdef __cplusplus } #endif #endif /* _SYS_FS_ZFS_H */ diff --git a/include/sys/spa.h b/include/sys/spa.h index f50cb5e04ee0..df41002ed09b 100644 --- a/include/sys/spa.h +++ b/include/sys/spa.h @@ -1,1255 +1,1256 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. * Copyright 2013 Saso Kiselkov. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2017 Joyent, Inc. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019, Allan Jude * Copyright (c) 2019, Klara Inc. * Copyright (c) 2019, Datto Inc. */ #ifndef _SYS_SPA_H #define _SYS_SPA_H #include #include #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * Forward references that lots of things need. */ typedef struct spa spa_t; typedef struct vdev vdev_t; typedef struct metaslab metaslab_t; typedef struct metaslab_group metaslab_group_t; typedef struct metaslab_class metaslab_class_t; typedef struct zio zio_t; typedef struct zilog zilog_t; typedef struct spa_aux_vdev spa_aux_vdev_t; typedef struct zbookmark_phys zbookmark_phys_t; typedef struct zbookmark_err_phys zbookmark_err_phys_t; struct bpobj; struct bplist; struct dsl_pool; struct dsl_dataset; struct dsl_crypto_params; /* * Alignment Shift (ashift) is an immutable, internal top-level vdev property * which can only be set at vdev creation time. Physical writes are always done * according to it, which makes 2^ashift the smallest possible IO on a vdev. * * We currently allow values ranging from 512 bytes (2^9 = 512) to 64 KiB * (2^16 = 65,536). */ #define ASHIFT_MIN 9 #define ASHIFT_MAX 16 /* * Size of block to hold the configuration data (a packed nvlist) */ #define SPA_CONFIG_BLOCKSIZE (1ULL << 14) /* * The DVA size encodings for LSIZE and PSIZE support blocks up to 32MB. * The ASIZE encoding should be at least 64 times larger (6 more bits) * to support up to 4-way RAID-Z mirror mode with worst-case gang block * overhead, three DVAs per bp, plus one more bit in case we do anything * else that expands the ASIZE. */ #define SPA_LSIZEBITS 16 /* LSIZE up to 32M (2^16 * 512) */ #define SPA_PSIZEBITS 16 /* PSIZE up to 32M (2^16 * 512) */ #define SPA_ASIZEBITS 24 /* ASIZE up to 64 times larger */ #define SPA_COMPRESSBITS 7 #define SPA_VDEVBITS 24 #define SPA_COMPRESSMASK ((1U << SPA_COMPRESSBITS) - 1) /* * All SPA data is represented by 128-bit data virtual addresses (DVAs). * The members of the dva_t should be considered opaque outside the SPA. */ typedef struct dva { uint64_t dva_word[2]; } dva_t; /* * Some checksums/hashes need a 256-bit initialization salt. This salt is kept * secret and is suitable for use in MAC algorithms as the key. */ typedef struct zio_cksum_salt { uint8_t zcs_bytes[32]; } zio_cksum_salt_t; /* * Each block is described by its DVAs, time of birth, checksum, etc. * The word-by-word, bit-by-bit layout of the blkptr is as follows: * * 64 56 48 40 32 24 16 8 0 * +-------+-------+-------+-------+-------+-------+-------+-------+ * 0 | pad | vdev1 | pad | ASIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 1 |G| offset1 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 2 | pad | vdev2 | pad | ASIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 3 |G| offset2 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 4 | pad | vdev3 | pad | ASIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 5 |G| offset3 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 7 | padding | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 8 | padding | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 9 | physical birth txg | * +-------+-------+-------+-------+-------+-------+-------+-------+ * a | logical birth txg | * +-------+-------+-------+-------+-------+-------+-------+-------+ * b | fill count | * +-------+-------+-------+-------+-------+-------+-------+-------+ * c | checksum[0] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * d | checksum[1] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * e | checksum[2] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * f | checksum[3] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * * Legend: * * vdev virtual device ID * offset offset into virtual device * LSIZE logical size * PSIZE physical size (after compression) * ASIZE allocated size (including RAID-Z parity and gang block headers) * cksum checksum function * comp compression function * G gang block indicator * B byteorder (endianness) * D dedup * X encryption * E blkptr_t contains embedded data (see below) * lvl level of indirection * type DMU object type * phys birth txg when dva[0] was written; zero if same as logical birth txg * note that typically all the dva's would be written in this * txg, but they could be different if they were moved by * device removal. * log. birth transaction group in which the block was logically born * fill count number of non-zero blocks under this bp * checksum[4] 256-bit checksum of the data this bp describes */ /* * The blkptr_t's of encrypted blocks also need to store the encryption * parameters so that the block can be decrypted. This layout is as follows: * * 64 56 48 40 32 24 16 8 0 * +-------+-------+-------+-------+-------+-------+-------+-------+ * 0 | vdev1 | pad | ASIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 1 |G| offset1 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 2 | vdev2 | pad | ASIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 3 |G| offset2 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 4 | salt | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 5 | IV1 | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 7 | padding | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 8 | padding | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 9 | physical birth txg | * +-------+-------+-------+-------+-------+-------+-------+-------+ * a | logical birth txg | * +-------+-------+-------+-------+-------+-------+-------+-------+ * b | IV2 | fill count | * +-------+-------+-------+-------+-------+-------+-------+-------+ * c | checksum[0] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * d | checksum[1] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * e | MAC[0] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * f | MAC[1] | * +-------+-------+-------+-------+-------+-------+-------+-------+ * * Legend: * * salt Salt for generating encryption keys * IV1 First 64 bits of encryption IV * X Block requires encryption handling (set to 1) * E blkptr_t contains embedded data (set to 0, see below) * fill count number of non-zero blocks under this bp (truncated to 32 bits) * IV2 Last 32 bits of encryption IV * checksum[2] 128-bit checksum of the data this bp describes * MAC[2] 128-bit message authentication code for this data * * The X bit being set indicates that this block is one of 3 types. If this is * a level 0 block with an encrypted object type, the block is encrypted * (see BP_IS_ENCRYPTED()). If this is a level 0 block with an unencrypted * object type, this block is authenticated with an HMAC (see * BP_IS_AUTHENTICATED()). Otherwise (if level > 0), this bp will use the MAC * words to store a checksum-of-MACs from the level below (see * BP_HAS_INDIRECT_MAC_CKSUM()). For convenience in the code, BP_IS_PROTECTED() * refers to both encrypted and authenticated blocks and BP_USES_CRYPT() * refers to any of these 3 kinds of blocks. * * The additional encryption parameters are the salt, IV, and MAC which are * explained in greater detail in the block comment at the top of zio_crypt.c. * The MAC occupies half of the checksum space since it serves a very similar * purpose: to prevent data corruption on disk. The only functional difference * is that the checksum is used to detect on-disk corruption whether or not the * encryption key is loaded and the MAC provides additional protection against * malicious disk tampering. We use the 3rd DVA to store the salt and first * 64 bits of the IV. As a result encrypted blocks can only have 2 copies * maximum instead of the normal 3. The last 32 bits of the IV are stored in * the upper bits of what is usually the fill count. Note that only blocks at * level 0 or -2 are ever encrypted, which allows us to guarantee that these * 32 bits are not trampled over by other code (see zio_crypt.c for details). * The salt and IV are not used for authenticated bps or bps with an indirect * MAC checksum, so these blocks can utilize all 3 DVAs and the full 64 bits * for the fill count. */ /* * "Embedded" blkptr_t's don't actually point to a block, instead they * have a data payload embedded in the blkptr_t itself. See the comment * in blkptr.c for more details. * * The blkptr_t is laid out as follows: * * 64 56 48 40 32 24 16 8 0 * +-------+-------+-------+-------+-------+-------+-------+-------+ * 0 | payload | * 1 | payload | * 2 | payload | * 3 | payload | * 4 | payload | * 5 | payload | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 6 |BDX|lvl| type | etype |E| comp| PSIZE| LSIZE | * +-------+-------+-------+-------+-------+-------+-------+-------+ * 7 | payload | * 8 | payload | * 9 | payload | * +-------+-------+-------+-------+-------+-------+-------+-------+ * a | logical birth txg | * +-------+-------+-------+-------+-------+-------+-------+-------+ * b | payload | * c | payload | * d | payload | * e | payload | * f | payload | * +-------+-------+-------+-------+-------+-------+-------+-------+ * * Legend: * * payload contains the embedded data * B (byteorder) byteorder (endianness) * D (dedup) padding (set to zero) * X encryption (set to zero) * E (embedded) set to one * lvl indirection level * type DMU object type * etype how to interpret embedded data (BP_EMBEDDED_TYPE_*) * comp compression function of payload * PSIZE size of payload after compression, in bytes * LSIZE logical size of payload, in bytes * note that 25 bits is enough to store the largest * "normal" BP's LSIZE (2^16 * 2^9) in bytes * log. birth transaction group in which the block was logically born * * Note that LSIZE and PSIZE are stored in bytes, whereas for non-embedded * bp's they are stored in units of SPA_MINBLOCKSHIFT. * Generally, the generic BP_GET_*() macros can be used on embedded BP's. * The B, D, X, lvl, type, and comp fields are stored the same as with normal * BP's so the BP_SET_* macros can be used with them. etype, PSIZE, LSIZE must * be set with the BPE_SET_* macros. BP_SET_EMBEDDED() should be called before * other macros, as they assert that they are only used on BP's of the correct * "embedded-ness". Encrypted blkptr_t's cannot be embedded because they use * the payload space for encryption parameters (see the comment above on * how encryption parameters are stored). */ #define BPE_GET_ETYPE(bp) \ (ASSERT(BP_IS_EMBEDDED(bp)), \ BF64_GET((bp)->blk_prop, 40, 8)) #define BPE_SET_ETYPE(bp, t) do { \ ASSERT(BP_IS_EMBEDDED(bp)); \ BF64_SET((bp)->blk_prop, 40, 8, t); \ } while (0) #define BPE_GET_LSIZE(bp) \ (ASSERT(BP_IS_EMBEDDED(bp)), \ BF64_GET_SB((bp)->blk_prop, 0, 25, 0, 1)) #define BPE_SET_LSIZE(bp, x) do { \ ASSERT(BP_IS_EMBEDDED(bp)); \ BF64_SET_SB((bp)->blk_prop, 0, 25, 0, 1, x); \ } while (0) #define BPE_GET_PSIZE(bp) \ (ASSERT(BP_IS_EMBEDDED(bp)), \ BF64_GET_SB((bp)->blk_prop, 25, 7, 0, 1)) #define BPE_SET_PSIZE(bp, x) do { \ ASSERT(BP_IS_EMBEDDED(bp)); \ BF64_SET_SB((bp)->blk_prop, 25, 7, 0, 1, x); \ } while (0) typedef enum bp_embedded_type { BP_EMBEDDED_TYPE_DATA, BP_EMBEDDED_TYPE_RESERVED, /* Reserved for Delphix byteswap feature. */ BP_EMBEDDED_TYPE_REDACTED, NUM_BP_EMBEDDED_TYPES } bp_embedded_type_t; #define BPE_NUM_WORDS 14 #define BPE_PAYLOAD_SIZE (BPE_NUM_WORDS * sizeof (uint64_t)) #define BPE_IS_PAYLOADWORD(bp, wp) \ ((wp) != &(bp)->blk_prop && (wp) != (&(bp)->blk_birth_word[1])) #define SPA_BLKPTRSHIFT 7 /* blkptr_t is 128 bytes */ #define SPA_DVAS_PER_BP 3 /* Number of DVAs in a bp */ #define SPA_SYNC_MIN_VDEVS 3 /* min vdevs to update during sync */ /* * A block is a hole when it has either 1) never been written to, or * 2) is zero-filled. In both cases, ZFS can return all zeroes for all reads * without physically allocating disk space. Holes are represented in the * blkptr_t structure by zeroed blk_dva. Correct checking for holes is * done through the BP_IS_HOLE macro. For holes, the logical size, level, * DMU object type, and birth times are all also stored for holes that * were written to at some point (i.e. were punched after having been filled). */ typedef struct blkptr { dva_t blk_dva[SPA_DVAS_PER_BP]; /* Data Virtual Addresses */ uint64_t blk_prop; /* size, compression, type, etc */ uint64_t blk_pad[2]; /* Extra space for the future */ uint64_t blk_birth_word[2]; uint64_t blk_fill; /* fill count */ zio_cksum_t blk_cksum; /* 256-bit checksum */ } blkptr_t; /* * Macros to get and set fields in a bp or DVA. */ /* * Note, for gang blocks, DVA_GET_ASIZE() is the total space allocated for * this gang DVA including its children BP's. The space allocated at this * DVA's vdev/offset is vdev_gang_header_asize(vdev). */ #define DVA_GET_ASIZE(dva) \ BF64_GET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, SPA_MINBLOCKSHIFT, 0) #define DVA_SET_ASIZE(dva, x) \ BF64_SET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, \ SPA_MINBLOCKSHIFT, 0, x) #define DVA_GET_VDEV(dva) BF64_GET((dva)->dva_word[0], 32, SPA_VDEVBITS) #define DVA_SET_VDEV(dva, x) \ BF64_SET((dva)->dva_word[0], 32, SPA_VDEVBITS, x) #define DVA_GET_OFFSET(dva) \ BF64_GET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0) #define DVA_SET_OFFSET(dva, x) \ BF64_SET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0, x) #define DVA_GET_GANG(dva) BF64_GET((dva)->dva_word[1], 63, 1) #define DVA_SET_GANG(dva, x) BF64_SET((dva)->dva_word[1], 63, 1, x) #define BP_GET_LSIZE(bp) \ (BP_IS_EMBEDDED(bp) ? \ (BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA ? BPE_GET_LSIZE(bp) : 0): \ BF64_GET_SB((bp)->blk_prop, 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1)) #define BP_SET_LSIZE(bp, x) do { \ ASSERT(!BP_IS_EMBEDDED(bp)); \ BF64_SET_SB((bp)->blk_prop, \ 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \ } while (0) #define BP_GET_PSIZE(bp) \ (BP_IS_EMBEDDED(bp) ? 0 : \ BF64_GET_SB((bp)->blk_prop, 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1)) #define BP_SET_PSIZE(bp, x) do { \ ASSERT(!BP_IS_EMBEDDED(bp)); \ BF64_SET_SB((bp)->blk_prop, \ 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \ } while (0) #define BP_GET_COMPRESS(bp) \ BF64_GET((bp)->blk_prop, 32, SPA_COMPRESSBITS) #define BP_SET_COMPRESS(bp, x) \ BF64_SET((bp)->blk_prop, 32, SPA_COMPRESSBITS, x) #define BP_IS_EMBEDDED(bp) BF64_GET((bp)->blk_prop, 39, 1) #define BP_SET_EMBEDDED(bp, x) BF64_SET((bp)->blk_prop, 39, 1, x) #define BP_GET_CHECKSUM(bp) \ (BP_IS_EMBEDDED(bp) ? ZIO_CHECKSUM_OFF : \ BF64_GET((bp)->blk_prop, 40, 8)) #define BP_SET_CHECKSUM(bp, x) do { \ ASSERT(!BP_IS_EMBEDDED(bp)); \ BF64_SET((bp)->blk_prop, 40, 8, x); \ } while (0) #define BP_GET_TYPE(bp) BF64_GET((bp)->blk_prop, 48, 8) #define BP_SET_TYPE(bp, x) BF64_SET((bp)->blk_prop, 48, 8, x) #define BP_GET_LEVEL(bp) BF64_GET((bp)->blk_prop, 56, 5) #define BP_SET_LEVEL(bp, x) BF64_SET((bp)->blk_prop, 56, 5, x) /* encrypted, authenticated, and MAC cksum bps use the same bit */ #define BP_USES_CRYPT(bp) BF64_GET((bp)->blk_prop, 61, 1) #define BP_SET_CRYPT(bp, x) BF64_SET((bp)->blk_prop, 61, 1, x) #define BP_IS_ENCRYPTED(bp) \ (BP_USES_CRYPT(bp) && \ BP_GET_LEVEL(bp) <= 0 && \ DMU_OT_IS_ENCRYPTED(BP_GET_TYPE(bp))) #define BP_IS_AUTHENTICATED(bp) \ (BP_USES_CRYPT(bp) && \ BP_GET_LEVEL(bp) <= 0 && \ !DMU_OT_IS_ENCRYPTED(BP_GET_TYPE(bp))) #define BP_HAS_INDIRECT_MAC_CKSUM(bp) \ (BP_USES_CRYPT(bp) && BP_GET_LEVEL(bp) > 0) #define BP_IS_PROTECTED(bp) \ (BP_IS_ENCRYPTED(bp) || BP_IS_AUTHENTICATED(bp)) #define BP_GET_DEDUP(bp) BF64_GET((bp)->blk_prop, 62, 1) #define BP_SET_DEDUP(bp, x) BF64_SET((bp)->blk_prop, 62, 1, x) #define BP_GET_BYTEORDER(bp) BF64_GET((bp)->blk_prop, 63, 1) #define BP_SET_BYTEORDER(bp, x) BF64_SET((bp)->blk_prop, 63, 1, x) #define BP_GET_FREE(bp) BF64_GET((bp)->blk_fill, 0, 1) #define BP_SET_FREE(bp, x) BF64_SET((bp)->blk_fill, 0, 1, x) #define BP_GET_LOGICAL_BIRTH(bp) (bp)->blk_birth_word[1] #define BP_SET_LOGICAL_BIRTH(bp, x) ((bp)->blk_birth_word[1] = (x)) #define BP_GET_PHYSICAL_BIRTH(bp) (bp)->blk_birth_word[0] #define BP_SET_PHYSICAL_BIRTH(bp, x) ((bp)->blk_birth_word[0] = (x)) #define BP_GET_BIRTH(bp) \ (BP_IS_EMBEDDED(bp) ? 0 : \ BP_GET_PHYSICAL_BIRTH(bp) ? BP_GET_PHYSICAL_BIRTH(bp) : \ BP_GET_LOGICAL_BIRTH(bp)) #define BP_SET_BIRTH(bp, logical, physical) \ { \ ASSERT(!BP_IS_EMBEDDED(bp)); \ BP_SET_LOGICAL_BIRTH(bp, logical); \ BP_SET_PHYSICAL_BIRTH(bp, \ ((logical) == (physical) ? 0 : (physical))); \ } #define BP_GET_FILL(bp) \ ((BP_IS_ENCRYPTED(bp)) ? BF64_GET((bp)->blk_fill, 0, 32) : \ ((BP_IS_EMBEDDED(bp)) ? 1 : (bp)->blk_fill)) #define BP_SET_FILL(bp, fill) \ { \ if (BP_IS_ENCRYPTED(bp)) \ BF64_SET((bp)->blk_fill, 0, 32, fill); \ else \ (bp)->blk_fill = fill; \ } #define BP_GET_IV2(bp) \ (ASSERT(BP_IS_ENCRYPTED(bp)), \ BF64_GET((bp)->blk_fill, 32, 32)) #define BP_SET_IV2(bp, iv2) \ { \ ASSERT(BP_IS_ENCRYPTED(bp)); \ BF64_SET((bp)->blk_fill, 32, 32, iv2); \ } #define BP_IS_METADATA(bp) \ (BP_GET_LEVEL(bp) > 0 || DMU_OT_IS_METADATA(BP_GET_TYPE(bp))) #define BP_GET_ASIZE(bp) \ (BP_IS_EMBEDDED(bp) ? 0 : \ DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \ DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \ (DVA_GET_ASIZE(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp))) #define BP_GET_UCSIZE(bp) \ (BP_IS_METADATA(bp) ? BP_GET_PSIZE(bp) : BP_GET_LSIZE(bp)) #define BP_GET_NDVAS(bp) \ (BP_IS_EMBEDDED(bp) ? 0 : \ !!DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \ !!DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \ (!!DVA_GET_ASIZE(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp))) #define BP_COUNT_GANG(bp) \ (BP_IS_EMBEDDED(bp) ? 0 : \ (DVA_GET_GANG(&(bp)->blk_dva[0]) + \ DVA_GET_GANG(&(bp)->blk_dva[1]) + \ (DVA_GET_GANG(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp)))) #define DVA_EQUAL(dva1, dva2) \ ((dva1)->dva_word[1] == (dva2)->dva_word[1] && \ (dva1)->dva_word[0] == (dva2)->dva_word[0]) #define BP_EQUAL(bp1, bp2) \ (BP_GET_BIRTH(bp1) == BP_GET_BIRTH(bp2) && \ BP_GET_LOGICAL_BIRTH(bp1) == BP_GET_LOGICAL_BIRTH(bp2) && \ DVA_EQUAL(&(bp1)->blk_dva[0], &(bp2)->blk_dva[0]) && \ DVA_EQUAL(&(bp1)->blk_dva[1], &(bp2)->blk_dva[1]) && \ DVA_EQUAL(&(bp1)->blk_dva[2], &(bp2)->blk_dva[2])) #define DVA_IS_VALID(dva) (DVA_GET_ASIZE(dva) != 0) #define BP_IDENTITY(bp) (ASSERT(!BP_IS_EMBEDDED(bp)), &(bp)->blk_dva[0]) #define BP_IS_GANG(bp) \ (BP_IS_EMBEDDED(bp) ? B_FALSE : DVA_GET_GANG(BP_IDENTITY(bp))) #define DVA_IS_EMPTY(dva) ((dva)->dva_word[0] == 0ULL && \ (dva)->dva_word[1] == 0ULL) #define BP_IS_HOLE(bp) \ (!BP_IS_EMBEDDED(bp) && DVA_IS_EMPTY(BP_IDENTITY(bp))) #define BP_SET_REDACTED(bp) \ { \ BP_SET_EMBEDDED(bp, B_TRUE); \ BPE_SET_ETYPE(bp, BP_EMBEDDED_TYPE_REDACTED); \ } #define BP_IS_REDACTED(bp) \ (BP_IS_EMBEDDED(bp) && BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_REDACTED) /* BP_IS_RAIDZ(bp) assumes no block compression */ #define BP_IS_RAIDZ(bp) (DVA_GET_ASIZE(&(bp)->blk_dva[0]) > \ BP_GET_PSIZE(bp)) #define BP_ZERO(bp) \ { \ (bp)->blk_dva[0].dva_word[0] = 0; \ (bp)->blk_dva[0].dva_word[1] = 0; \ (bp)->blk_dva[1].dva_word[0] = 0; \ (bp)->blk_dva[1].dva_word[1] = 0; \ (bp)->blk_dva[2].dva_word[0] = 0; \ (bp)->blk_dva[2].dva_word[1] = 0; \ (bp)->blk_prop = 0; \ (bp)->blk_pad[0] = 0; \ (bp)->blk_pad[1] = 0; \ (bp)->blk_birth_word[0] = 0; \ (bp)->blk_birth_word[1] = 0; \ (bp)->blk_fill = 0; \ ZIO_SET_CHECKSUM(&(bp)->blk_cksum, 0, 0, 0, 0); \ } #ifdef _ZFS_BIG_ENDIAN #define ZFS_HOST_BYTEORDER (0ULL) #else #define ZFS_HOST_BYTEORDER (1ULL) #endif #define BP_SHOULD_BYTESWAP(bp) (BP_GET_BYTEORDER(bp) != ZFS_HOST_BYTEORDER) #define BP_SPRINTF_LEN 400 /* * This macro allows code sharing between zfs, libzpool, and mdb. * 'func' is either kmem_scnprintf() or mdb_snprintf(). * 'ws' (whitespace) can be ' ' for single-line format, '\n' for multi-line. */ #define SNPRINTF_BLKPTR(func, ws, buf, size, bp, type, checksum, compress) \ { \ static const char *const copyname[] = \ { "zero", "single", "double", "triple" }; \ int len = 0; \ int copies = 0; \ const char *crypt_type; \ if (bp != NULL) { \ if (BP_IS_ENCRYPTED(bp)) { \ crypt_type = "encrypted"; \ /* LINTED E_SUSPICIOUS_COMPARISON */ \ } else if (BP_IS_AUTHENTICATED(bp)) { \ crypt_type = "authenticated"; \ } else if (BP_HAS_INDIRECT_MAC_CKSUM(bp)) { \ crypt_type = "indirect-MAC"; \ } else { \ crypt_type = "unencrypted"; \ } \ } \ if (bp == NULL) { \ len += func(buf + len, size - len, ""); \ } else if (BP_IS_HOLE(bp)) { \ len += func(buf + len, size - len, \ "HOLE [L%llu %s] " \ "size=%llxL birth=%lluL", \ (u_longlong_t)BP_GET_LEVEL(bp), \ type, \ (u_longlong_t)BP_GET_LSIZE(bp), \ (u_longlong_t)BP_GET_LOGICAL_BIRTH(bp)); \ } else if (BP_IS_EMBEDDED(bp)) { \ len = func(buf + len, size - len, \ "EMBEDDED [L%llu %s] et=%u %s " \ "size=%llxL/%llxP birth=%lluL", \ (u_longlong_t)BP_GET_LEVEL(bp), \ type, \ (int)BPE_GET_ETYPE(bp), \ compress, \ (u_longlong_t)BPE_GET_LSIZE(bp), \ (u_longlong_t)BPE_GET_PSIZE(bp), \ (u_longlong_t)BP_GET_LOGICAL_BIRTH(bp)); \ } else if (BP_IS_REDACTED(bp)) { \ len += func(buf + len, size - len, \ "REDACTED [L%llu %s] size=%llxL birth=%lluL", \ (u_longlong_t)BP_GET_LEVEL(bp), \ type, \ (u_longlong_t)BP_GET_LSIZE(bp), \ (u_longlong_t)BP_GET_LOGICAL_BIRTH(bp)); \ } else { \ for (int d = 0; d < BP_GET_NDVAS(bp); d++) { \ const dva_t *dva = &bp->blk_dva[d]; \ if (DVA_IS_VALID(dva)) \ copies++; \ len += func(buf + len, size - len, \ "DVA[%d]=<%llu:%llx:%llx>%c", d, \ (u_longlong_t)DVA_GET_VDEV(dva), \ (u_longlong_t)DVA_GET_OFFSET(dva), \ (u_longlong_t)DVA_GET_ASIZE(dva), \ ws); \ } \ ASSERT3S(copies, >, 0); \ if (BP_IS_ENCRYPTED(bp)) { \ len += func(buf + len, size - len, \ "salt=%llx iv=%llx:%llx%c", \ (u_longlong_t)bp->blk_dva[2].dva_word[0], \ (u_longlong_t)bp->blk_dva[2].dva_word[1], \ (u_longlong_t)BP_GET_IV2(bp), \ ws); \ } \ if (BP_IS_GANG(bp) && \ DVA_GET_ASIZE(&bp->blk_dva[2]) <= \ DVA_GET_ASIZE(&bp->blk_dva[1]) / 2) \ copies--; \ len += func(buf + len, size - len, \ "[L%llu %s] %s %s %s %s %s %s %s%c" \ "size=%llxL/%llxP birth=%lluL/%lluP fill=%llu%c" \ "cksum=%016llx:%016llx:%016llx:%016llx", \ (u_longlong_t)BP_GET_LEVEL(bp), \ type, \ checksum, \ compress, \ crypt_type, \ BP_GET_BYTEORDER(bp) == 0 ? "BE" : "LE", \ BP_IS_GANG(bp) ? "gang" : "contiguous", \ BP_GET_DEDUP(bp) ? "dedup" : "unique", \ copyname[copies], \ ws, \ (u_longlong_t)BP_GET_LSIZE(bp), \ (u_longlong_t)BP_GET_PSIZE(bp), \ (u_longlong_t)BP_GET_LOGICAL_BIRTH(bp), \ (u_longlong_t)BP_GET_BIRTH(bp), \ (u_longlong_t)BP_GET_FILL(bp), \ ws, \ (u_longlong_t)bp->blk_cksum.zc_word[0], \ (u_longlong_t)bp->blk_cksum.zc_word[1], \ (u_longlong_t)bp->blk_cksum.zc_word[2], \ (u_longlong_t)bp->blk_cksum.zc_word[3]); \ } \ ASSERT(len < size); \ } #define BP_GET_BUFC_TYPE(bp) \ (BP_IS_METADATA(bp) ? ARC_BUFC_METADATA : ARC_BUFC_DATA) typedef enum spa_import_type { SPA_IMPORT_EXISTING, SPA_IMPORT_ASSEMBLE } spa_import_type_t; typedef enum spa_mode { SPA_MODE_UNINIT = 0, SPA_MODE_READ = 1, SPA_MODE_WRITE = 2, } spa_mode_t; /* * Send TRIM commands in-line during normal pool operation while deleting. * OFF: no * ON: yes */ typedef enum { SPA_AUTOTRIM_OFF = 0, /* default */ SPA_AUTOTRIM_ON, } spa_autotrim_t; /* * Reason TRIM command was issued, used internally for accounting purposes. */ typedef enum trim_type { TRIM_TYPE_MANUAL = 0, TRIM_TYPE_AUTO = 1, TRIM_TYPE_SIMPLE = 2 } trim_type_t; /* state manipulation functions */ extern int spa_open(const char *pool, spa_t **, const void *tag); extern int spa_open_rewind(const char *pool, spa_t **, const void *tag, nvlist_t *policy, nvlist_t **config); extern int spa_get_stats(const char *pool, nvlist_t **config, char *altroot, size_t buflen); extern int spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props, nvlist_t *zplprops, struct dsl_crypto_params *dcp); extern int spa_import(char *pool, nvlist_t *config, nvlist_t *props, uint64_t flags); extern nvlist_t *spa_tryimport(nvlist_t *tryconfig); extern int spa_destroy(const char *pool); extern int spa_checkpoint(const char *pool); extern int spa_checkpoint_discard(const char *pool); extern int spa_export(const char *pool, nvlist_t **oldconfig, boolean_t force, boolean_t hardforce); extern int spa_reset(const char *pool); extern void spa_async_request(spa_t *spa, int flag); extern void spa_async_unrequest(spa_t *spa, int flag); extern void spa_async_suspend(spa_t *spa); extern void spa_async_resume(spa_t *spa); extern int spa_async_tasks(spa_t *spa); extern spa_t *spa_inject_addref(char *pool); extern void spa_inject_delref(spa_t *spa); extern void spa_scan_stat_init(spa_t *spa); extern int spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps); extern int bpobj_enqueue_alloc_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx); extern int bpobj_enqueue_free_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx); #define SPA_ASYNC_CONFIG_UPDATE 0x01 #define SPA_ASYNC_REMOVE 0x02 #define SPA_ASYNC_FAULT_VDEV 0x04 #define SPA_ASYNC_RESILVER_DONE 0x08 #define SPA_ASYNC_RESILVER 0x10 #define SPA_ASYNC_AUTOEXPAND 0x20 #define SPA_ASYNC_REMOVE_DONE 0x40 #define SPA_ASYNC_REMOVE_STOP 0x80 #define SPA_ASYNC_INITIALIZE_RESTART 0x100 #define SPA_ASYNC_TRIM_RESTART 0x200 #define SPA_ASYNC_AUTOTRIM_RESTART 0x400 #define SPA_ASYNC_L2CACHE_REBUILD 0x800 #define SPA_ASYNC_L2CACHE_TRIM 0x1000 #define SPA_ASYNC_REBUILD_DONE 0x2000 #define SPA_ASYNC_DETACH_SPARE 0x4000 /* device manipulation */ extern int spa_vdev_add(spa_t *spa, nvlist_t *nvroot, boolean_t ashift_check); extern int spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot, int replacing, int rebuild); extern int spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid, int replace_done); extern int spa_vdev_alloc(spa_t *spa, uint64_t guid); extern int spa_vdev_noalloc(spa_t *spa, uint64_t guid); extern boolean_t spa_vdev_remove_active(spa_t *spa); extern int spa_vdev_initialize(spa_t *spa, nvlist_t *nv, uint64_t cmd_type, nvlist_t *vdev_errlist); extern int spa_vdev_trim(spa_t *spa, nvlist_t *nv, uint64_t cmd_type, uint64_t rate, boolean_t partial, boolean_t secure, nvlist_t *vdev_errlist); extern int spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath); extern int spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru); extern int spa_vdev_split_mirror(spa_t *spa, const char *newname, nvlist_t *config, nvlist_t *props, boolean_t exp); /* spare state (which is global across all pools) */ extern void spa_spare_add(vdev_t *vd); extern void spa_spare_remove(vdev_t *vd); extern boolean_t spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt); extern void spa_spare_activate(vdev_t *vd); /* L2ARC state (which is global across all pools) */ extern void spa_l2cache_add(vdev_t *vd); extern void spa_l2cache_remove(vdev_t *vd); extern boolean_t spa_l2cache_exists(uint64_t guid, uint64_t *pool); extern void spa_l2cache_activate(vdev_t *vd); extern void spa_l2cache_drop(spa_t *spa); /* scanning */ extern int spa_scan(spa_t *spa, pool_scan_func_t func); extern int spa_scan_stop(spa_t *spa); extern int spa_scrub_pause_resume(spa_t *spa, pool_scrub_cmd_t flag); /* spa syncing */ extern void spa_sync(spa_t *spa, uint64_t txg); /* only for DMU use */ extern void spa_sync_allpools(void); extern uint_t zfs_sync_pass_deferred_free; /* spa sync taskqueues */ taskq_t *spa_sync_tq_create(spa_t *spa, const char *name); void spa_sync_tq_destroy(spa_t *spa); uint_t spa_acq_allocator(spa_t *spa); void spa_rel_allocator(spa_t *spa, uint_t allocator); void spa_select_allocator(zio_t *zio); /* spa namespace global mutex */ extern kmutex_t spa_namespace_lock; extern avl_tree_t spa_namespace_avl; extern kcondvar_t spa_namespace_cv; /* * SPA configuration functions in spa_config.c */ #define SPA_CONFIG_UPDATE_POOL 0 #define SPA_CONFIG_UPDATE_VDEVS 1 extern void spa_write_cachefile(spa_t *, boolean_t, boolean_t, boolean_t); extern void spa_config_load(void); extern int spa_all_configs(uint64_t *generation, nvlist_t **pools); extern void spa_config_set(spa_t *spa, nvlist_t *config); extern nvlist_t *spa_config_generate(spa_t *spa, vdev_t *vd, uint64_t txg, int getstats); extern void spa_config_update(spa_t *spa, int what); extern int spa_config_parse(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id, int atype); /* * Miscellaneous SPA routines in spa_misc.c */ /* Namespace manipulation */ extern spa_t *spa_lookup(const char *name); extern spa_t *spa_add(const char *name, nvlist_t *config, const char *altroot); extern void spa_remove(spa_t *spa); extern spa_t *spa_next(spa_t *prev); /* Refcount functions */ extern void spa_open_ref(spa_t *spa, const void *tag); extern void spa_close(spa_t *spa, const void *tag); extern void spa_async_close(spa_t *spa, const void *tag); extern boolean_t spa_refcount_zero(spa_t *spa); #define SCL_NONE 0x00 #define SCL_CONFIG 0x01 #define SCL_STATE 0x02 #define SCL_L2ARC 0x04 /* hack until L2ARC 2.0 */ #define SCL_ALLOC 0x08 #define SCL_ZIO 0x10 #define SCL_FREE 0x20 #define SCL_VDEV 0x40 #define SCL_LOCKS 7 #define SCL_ALL ((1 << SCL_LOCKS) - 1) #define SCL_STATE_ALL (SCL_STATE | SCL_L2ARC | SCL_ZIO) /* Historical pool statistics */ typedef struct spa_history_kstat { kmutex_t lock; uint64_t count; uint64_t size; kstat_t *kstat; void *priv; list_t list; } spa_history_kstat_t; typedef struct spa_history_list { uint64_t size; procfs_list_t procfs_list; } spa_history_list_t; typedef struct spa_stats { spa_history_list_t read_history; spa_history_list_t txg_history; spa_history_kstat_t tx_assign_histogram; spa_history_list_t mmp_history; spa_history_kstat_t state; /* pool state */ spa_history_kstat_t guid; /* pool guid */ spa_history_kstat_t iostats; } spa_stats_t; typedef enum txg_state { TXG_STATE_BIRTH = 0, TXG_STATE_OPEN = 1, TXG_STATE_QUIESCED = 2, TXG_STATE_WAIT_FOR_SYNC = 3, TXG_STATE_SYNCED = 4, TXG_STATE_COMMITTED = 5, } txg_state_t; typedef struct txg_stat { vdev_stat_t vs1; vdev_stat_t vs2; uint64_t txg; uint64_t ndirty; } txg_stat_t; /* Assorted pool IO kstats */ typedef struct spa_iostats { kstat_named_t trim_extents_written; kstat_named_t trim_bytes_written; kstat_named_t trim_extents_skipped; kstat_named_t trim_bytes_skipped; kstat_named_t trim_extents_failed; kstat_named_t trim_bytes_failed; kstat_named_t autotrim_extents_written; kstat_named_t autotrim_bytes_written; kstat_named_t autotrim_extents_skipped; kstat_named_t autotrim_bytes_skipped; kstat_named_t autotrim_extents_failed; kstat_named_t autotrim_bytes_failed; kstat_named_t simple_trim_extents_written; kstat_named_t simple_trim_bytes_written; kstat_named_t simple_trim_extents_skipped; kstat_named_t simple_trim_bytes_skipped; kstat_named_t simple_trim_extents_failed; kstat_named_t simple_trim_bytes_failed; } spa_iostats_t; extern void spa_stats_init(spa_t *spa); extern void spa_stats_destroy(spa_t *spa); extern void spa_read_history_add(spa_t *spa, const zbookmark_phys_t *zb, uint32_t aflags); extern void spa_txg_history_add(spa_t *spa, uint64_t txg, hrtime_t birth_time); extern int spa_txg_history_set(spa_t *spa, uint64_t txg, txg_state_t completed_state, hrtime_t completed_time); extern txg_stat_t *spa_txg_history_init_io(spa_t *, uint64_t, struct dsl_pool *); extern void spa_txg_history_fini_io(spa_t *, txg_stat_t *); extern void spa_tx_assign_add_nsecs(spa_t *spa, uint64_t nsecs); extern int spa_mmp_history_set_skip(spa_t *spa, uint64_t mmp_kstat_id); extern int spa_mmp_history_set(spa_t *spa, uint64_t mmp_kstat_id, int io_error, hrtime_t duration); extern void spa_mmp_history_add(spa_t *spa, uint64_t txg, uint64_t timestamp, uint64_t mmp_delay, vdev_t *vd, int label, uint64_t mmp_kstat_id, int error); extern void spa_iostats_trim_add(spa_t *spa, trim_type_t type, uint64_t extents_written, uint64_t bytes_written, uint64_t extents_skipped, uint64_t bytes_skipped, uint64_t extents_failed, uint64_t bytes_failed); extern void spa_import_progress_add(spa_t *spa); extern void spa_import_progress_remove(uint64_t spa_guid); extern int spa_import_progress_set_mmp_check(uint64_t pool_guid, uint64_t mmp_sec_remaining); extern int spa_import_progress_set_max_txg(uint64_t pool_guid, uint64_t max_txg); extern int spa_import_progress_set_state(uint64_t pool_guid, spa_load_state_t spa_load_state); extern void spa_import_progress_set_notes(spa_t *spa, const char *fmt, ...) __printflike(2, 3); extern void spa_import_progress_set_notes_nolog(spa_t *spa, const char *fmt, ...) __printflike(2, 3); /* Pool configuration locks */ extern int spa_config_tryenter(spa_t *spa, int locks, const void *tag, krw_t rw); extern void spa_config_enter(spa_t *spa, int locks, const void *tag, krw_t rw); extern void spa_config_enter_mmp(spa_t *spa, int locks, const void *tag, krw_t rw); extern void spa_config_exit(spa_t *spa, int locks, const void *tag); extern int spa_config_held(spa_t *spa, int locks, krw_t rw); /* Pool vdev add/remove lock */ extern uint64_t spa_vdev_enter(spa_t *spa); extern uint64_t spa_vdev_detach_enter(spa_t *spa, uint64_t guid); extern uint64_t spa_vdev_config_enter(spa_t *spa); extern void spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, const char *tag); extern int spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error); /* Pool vdev state change lock */ extern void spa_vdev_state_enter(spa_t *spa, int oplock); extern int spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error); /* Log state */ typedef enum spa_log_state { SPA_LOG_UNKNOWN = 0, /* unknown log state */ SPA_LOG_MISSING, /* missing log(s) */ SPA_LOG_CLEAR, /* clear the log(s) */ SPA_LOG_GOOD, /* log(s) are good */ } spa_log_state_t; extern spa_log_state_t spa_get_log_state(spa_t *spa); extern void spa_set_log_state(spa_t *spa, spa_log_state_t state); extern int spa_reset_logs(spa_t *spa); /* Log claim callback */ extern void spa_claim_notify(zio_t *zio); extern void spa_deadman(void *); /* Accessor functions */ extern boolean_t spa_shutting_down(spa_t *spa); extern struct dsl_pool *spa_get_dsl(spa_t *spa); extern boolean_t spa_is_initializing(spa_t *spa); extern boolean_t spa_indirect_vdevs_loaded(spa_t *spa); extern blkptr_t *spa_get_rootblkptr(spa_t *spa); extern void spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp); extern void spa_altroot(spa_t *, char *, size_t); extern uint32_t spa_sync_pass(spa_t *spa); extern char *spa_name(spa_t *spa); extern uint64_t spa_guid(spa_t *spa); extern uint64_t spa_load_guid(spa_t *spa); extern uint64_t spa_last_synced_txg(spa_t *spa); extern uint64_t spa_first_txg(spa_t *spa); extern uint64_t spa_syncing_txg(spa_t *spa); extern uint64_t spa_final_dirty_txg(spa_t *spa); extern uint64_t spa_version(spa_t *spa); extern pool_state_t spa_state(spa_t *spa); extern spa_load_state_t spa_load_state(spa_t *spa); extern uint64_t spa_freeze_txg(spa_t *spa); extern uint64_t spa_get_worst_case_asize(spa_t *spa, uint64_t lsize); extern uint64_t spa_get_dspace(spa_t *spa); extern uint64_t spa_get_checkpoint_space(spa_t *spa); extern uint64_t spa_get_slop_space(spa_t *spa); extern void spa_update_dspace(spa_t *spa); extern uint64_t spa_version(spa_t *spa); extern boolean_t spa_deflate(spa_t *spa); extern metaslab_class_t *spa_normal_class(spa_t *spa); extern metaslab_class_t *spa_log_class(spa_t *spa); extern metaslab_class_t *spa_embedded_log_class(spa_t *spa); extern metaslab_class_t *spa_special_class(spa_t *spa); extern metaslab_class_t *spa_dedup_class(spa_t *spa); extern metaslab_class_t *spa_preferred_class(spa_t *spa, uint64_t size, dmu_object_type_t objtype, uint_t level, uint_t special_smallblk); +extern boolean_t spa_special_has_ddt(spa_t *spa); extern void spa_evicting_os_register(spa_t *, objset_t *os); extern void spa_evicting_os_deregister(spa_t *, objset_t *os); extern void spa_evicting_os_wait(spa_t *spa); extern int spa_max_replication(spa_t *spa); extern int spa_prev_software_version(spa_t *spa); extern uint64_t spa_get_failmode(spa_t *spa); extern uint64_t spa_get_deadman_failmode(spa_t *spa); extern void spa_set_deadman_failmode(spa_t *spa, const char *failmode); extern boolean_t spa_suspended(spa_t *spa); extern uint64_t spa_bootfs(spa_t *spa); extern uint64_t spa_delegation(spa_t *spa); extern objset_t *spa_meta_objset(spa_t *spa); extern space_map_t *spa_syncing_log_sm(spa_t *spa); extern uint64_t spa_deadman_synctime(spa_t *spa); extern uint64_t spa_deadman_ziotime(spa_t *spa); extern uint64_t spa_dirty_data(spa_t *spa); extern spa_autotrim_t spa_get_autotrim(spa_t *spa); extern int spa_get_allocator(spa_t *spa); extern void spa_set_allocator(spa_t *spa, const char *allocator); /* Miscellaneous support routines */ extern void spa_load_failed(spa_t *spa, const char *fmt, ...) __attribute__((format(printf, 2, 3))); extern void spa_load_note(spa_t *spa, const char *fmt, ...) __attribute__((format(printf, 2, 3))); extern void spa_activate_mos_feature(spa_t *spa, const char *feature, dmu_tx_t *tx); extern void spa_deactivate_mos_feature(spa_t *spa, const char *feature); extern spa_t *spa_by_guid(uint64_t pool_guid, uint64_t device_guid); extern boolean_t spa_guid_exists(uint64_t pool_guid, uint64_t device_guid); extern char *spa_strdup(const char *); extern void spa_strfree(char *); extern uint64_t spa_generate_guid(spa_t *spa); extern void snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp); extern void spa_freeze(spa_t *spa); extern int spa_change_guid(spa_t *spa); extern void spa_upgrade(spa_t *spa, uint64_t version); extern void spa_evict_all(void); extern vdev_t *spa_lookup_by_guid(spa_t *spa, uint64_t guid, boolean_t l2cache); extern boolean_t spa_has_l2cache(spa_t *, uint64_t guid); extern boolean_t spa_has_spare(spa_t *, uint64_t guid); extern uint64_t dva_get_dsize_sync(spa_t *spa, const dva_t *dva); extern uint64_t bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp); extern uint64_t bp_get_dsize(spa_t *spa, const blkptr_t *bp); extern boolean_t spa_has_slogs(spa_t *spa); extern boolean_t spa_is_root(spa_t *spa); extern boolean_t spa_writeable(spa_t *spa); extern boolean_t spa_has_pending_synctask(spa_t *spa); extern int spa_maxblocksize(spa_t *spa); extern int spa_maxdnodesize(spa_t *spa); extern boolean_t spa_has_checkpoint(spa_t *spa); extern boolean_t spa_importing_readonly_checkpoint(spa_t *spa); extern boolean_t spa_suspend_async_destroy(spa_t *spa); extern uint64_t spa_min_claim_txg(spa_t *spa); extern boolean_t zfs_dva_valid(spa_t *spa, const dva_t *dva, const blkptr_t *bp); typedef void (*spa_remap_cb_t)(uint64_t vdev, uint64_t offset, uint64_t size, void *arg); extern boolean_t spa_remap_blkptr(spa_t *spa, blkptr_t *bp, spa_remap_cb_t callback, void *arg); extern uint64_t spa_get_last_removal_txg(spa_t *spa); extern boolean_t spa_trust_config(spa_t *spa); extern uint64_t spa_missing_tvds_allowed(spa_t *spa); extern void spa_set_missing_tvds(spa_t *spa, uint64_t missing); extern boolean_t spa_top_vdevs_spacemap_addressable(spa_t *spa); extern uint64_t spa_total_metaslabs(spa_t *spa); extern boolean_t spa_multihost(spa_t *spa); extern uint32_t spa_get_hostid(spa_t *spa); extern void spa_activate_allocation_classes(spa_t *, dmu_tx_t *); extern boolean_t spa_livelist_delete_check(spa_t *spa); extern boolean_t spa_mmp_remote_host_activity(spa_t *spa); extern spa_mode_t spa_mode(spa_t *spa); extern uint64_t zfs_strtonum(const char *str, char **nptr); extern char *spa_his_ievent_table[]; extern void spa_history_create_obj(spa_t *spa, dmu_tx_t *tx); extern int spa_history_get(spa_t *spa, uint64_t *offset, uint64_t *len_read, char *his_buf); extern int spa_history_log(spa_t *spa, const char *his_buf); extern int spa_history_log_nvl(spa_t *spa, nvlist_t *nvl); extern void spa_history_log_version(spa_t *spa, const char *operation, dmu_tx_t *tx); extern void spa_history_log_internal(spa_t *spa, const char *operation, dmu_tx_t *tx, const char *fmt, ...) __printflike(4, 5); extern void spa_history_log_internal_ds(struct dsl_dataset *ds, const char *op, dmu_tx_t *tx, const char *fmt, ...) __printflike(4, 5); extern void spa_history_log_internal_dd(dsl_dir_t *dd, const char *operation, dmu_tx_t *tx, const char *fmt, ...) __printflike(4, 5); extern const char *spa_state_to_name(spa_t *spa); /* error handling */ struct zbookmark_phys; extern void spa_log_error(spa_t *spa, const zbookmark_phys_t *zb, const uint64_t birth); extern void spa_remove_error(spa_t *spa, zbookmark_phys_t *zb, uint64_t birth); extern int zfs_ereport_post(const char *clazz, spa_t *spa, vdev_t *vd, const zbookmark_phys_t *zb, zio_t *zio, uint64_t state); extern boolean_t zfs_ereport_is_valid(const char *clazz, spa_t *spa, vdev_t *vd, zio_t *zio); extern void zfs_ereport_taskq_fini(void); extern void zfs_ereport_clear(spa_t *spa, vdev_t *vd); extern nvlist_t *zfs_event_create(spa_t *spa, vdev_t *vd, const char *type, const char *name, nvlist_t *aux); extern void zfs_post_remove(spa_t *spa, vdev_t *vd); extern void zfs_post_state_change(spa_t *spa, vdev_t *vd, uint64_t laststate); extern void zfs_post_autoreplace(spa_t *spa, vdev_t *vd); extern uint64_t spa_approx_errlog_size(spa_t *spa); extern int spa_get_errlog(spa_t *spa, void *uaddr, uint64_t *count); extern uint64_t spa_get_last_errlog_size(spa_t *spa); extern void spa_errlog_rotate(spa_t *spa); extern void spa_errlog_drain(spa_t *spa); extern void spa_errlog_sync(spa_t *spa, uint64_t txg); extern void spa_get_errlists(spa_t *spa, avl_tree_t *last, avl_tree_t *scrub); extern void spa_delete_dataset_errlog(spa_t *spa, uint64_t ds, dmu_tx_t *tx); extern void spa_swap_errlog(spa_t *spa, uint64_t new_head_ds, uint64_t old_head_ds, dmu_tx_t *tx); extern void sync_error_list(spa_t *spa, avl_tree_t *t, uint64_t *obj, dmu_tx_t *tx); extern void spa_upgrade_errlog(spa_t *spa, dmu_tx_t *tx); extern int find_top_affected_fs(spa_t *spa, uint64_t head_ds, zbookmark_err_phys_t *zep, uint64_t *top_affected_fs); extern int find_birth_txg(struct dsl_dataset *ds, zbookmark_err_phys_t *zep, uint64_t *birth_txg); extern void zep_to_zb(uint64_t dataset, zbookmark_err_phys_t *zep, zbookmark_phys_t *zb); extern void name_to_errphys(char *buf, zbookmark_err_phys_t *zep); /* vdev mirror */ extern void vdev_mirror_stat_init(void); extern void vdev_mirror_stat_fini(void); /* Initialization and termination */ extern void spa_init(spa_mode_t mode); extern void spa_fini(void); extern void spa_boot_init(void); /* properties */ extern int spa_prop_set(spa_t *spa, nvlist_t *nvp); extern int spa_prop_get(spa_t *spa, nvlist_t **nvp); extern void spa_prop_clear_bootfs(spa_t *spa, uint64_t obj, dmu_tx_t *tx); extern void spa_configfile_set(spa_t *, nvlist_t *, boolean_t); /* asynchronous event notification */ extern void spa_event_notify(spa_t *spa, vdev_t *vdev, nvlist_t *hist_nvl, const char *name); extern void zfs_ereport_zvol_post(const char *subclass, const char *name, const char *device_name, const char *raw_name); /* waiting for pool activities to complete */ extern int spa_wait(const char *pool, zpool_wait_activity_t activity, boolean_t *waited); extern int spa_wait_tag(const char *name, zpool_wait_activity_t activity, uint64_t tag, boolean_t *waited); extern void spa_notify_waiters(spa_t *spa); extern void spa_wake_waiters(spa_t *spa); extern void spa_import_os(spa_t *spa); extern void spa_export_os(spa_t *spa); extern void spa_activate_os(spa_t *spa); extern void spa_deactivate_os(spa_t *spa); /* module param call functions */ int param_set_deadman_ziotime(ZFS_MODULE_PARAM_ARGS); int param_set_deadman_synctime(ZFS_MODULE_PARAM_ARGS); int param_set_slop_shift(ZFS_MODULE_PARAM_ARGS); int param_set_deadman_failmode(ZFS_MODULE_PARAM_ARGS); int param_set_active_allocator(ZFS_MODULE_PARAM_ARGS); #ifdef ZFS_DEBUG #define dprintf_bp(bp, fmt, ...) do { \ if (zfs_flags & ZFS_DEBUG_DPRINTF) { \ char *__blkbuf = kmem_alloc(BP_SPRINTF_LEN, KM_SLEEP); \ snprintf_blkptr(__blkbuf, BP_SPRINTF_LEN, (bp)); \ dprintf(fmt " %s\n", __VA_ARGS__, __blkbuf); \ kmem_free(__blkbuf, BP_SPRINTF_LEN); \ } \ } while (0) #else #define dprintf_bp(bp, fmt, ...) #endif extern spa_mode_t spa_mode_global; extern int zfs_deadman_enabled; extern uint64_t zfs_deadman_synctime_ms; extern uint64_t zfs_deadman_ziotime_ms; extern uint64_t zfs_deadman_checktime_ms; extern kmem_cache_t *zio_buf_cache[]; extern kmem_cache_t *zio_data_buf_cache[]; #ifdef __cplusplus } #endif #endif /* _SYS_SPA_H */ diff --git a/include/sys/spa_impl.h b/include/sys/spa_impl.h index 5605a35b8641..47f349327461 100644 --- a/include/sys/spa_impl.h +++ b/include/sys/spa_impl.h @@ -1,500 +1,503 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. * Copyright 2013 Saso Kiselkov. All rights reserved. * Copyright (c) 2016 Actifio, Inc. All rights reserved. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019 Datto Inc. */ #ifndef _SYS_SPA_IMPL_H #define _SYS_SPA_IMPL_H #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif typedef struct spa_alloc { kmutex_t spaa_lock; avl_tree_t spaa_tree; } ____cacheline_aligned spa_alloc_t; typedef struct spa_allocs_use { kmutex_t sau_lock; uint_t sau_rotor; boolean_t sau_inuse[]; } spa_allocs_use_t; typedef struct spa_error_entry { zbookmark_phys_t se_bookmark; char *se_name; avl_node_t se_avl; zbookmark_err_phys_t se_zep; /* not accounted in avl_find */ } spa_error_entry_t; typedef struct spa_history_phys { uint64_t sh_pool_create_len; /* ending offset of zpool create */ uint64_t sh_phys_max_off; /* physical EOF */ uint64_t sh_bof; /* logical BOF */ uint64_t sh_eof; /* logical EOF */ uint64_t sh_records_lost; /* num of records overwritten */ } spa_history_phys_t; /* * All members must be uint64_t, for byteswap purposes. */ typedef struct spa_removing_phys { uint64_t sr_state; /* dsl_scan_state_t */ /* * The vdev ID that we most recently attempted to remove, * or -1 if no removal has been attempted. */ uint64_t sr_removing_vdev; /* * The vdev ID that we most recently successfully removed, * or -1 if no devices have been removed. */ uint64_t sr_prev_indirect_vdev; uint64_t sr_start_time; uint64_t sr_end_time; /* * Note that we can not use the space map's or indirect mapping's * accounting as a substitute for these values, because we need to * count frees of not-yet-copied data as though it did the copy. * Otherwise, we could get into a situation where copied > to_copy, * or we complete before copied == to_copy. */ uint64_t sr_to_copy; /* bytes that need to be copied */ uint64_t sr_copied; /* bytes that have been copied or freed */ } spa_removing_phys_t; /* * This struct is stored as an entry in the DMU_POOL_DIRECTORY_OBJECT * (with key DMU_POOL_CONDENSING_INDIRECT). It is present if a condense * of an indirect vdev's mapping object is in progress. */ typedef struct spa_condensing_indirect_phys { /* * The vdev ID of the indirect vdev whose indirect mapping is * being condensed. */ uint64_t scip_vdev; /* * The vdev's old obsolete spacemap. This spacemap's contents are * being integrated into the new mapping. */ uint64_t scip_prev_obsolete_sm_object; /* * The new mapping object that is being created. */ uint64_t scip_next_mapping_object; } spa_condensing_indirect_phys_t; struct spa_aux_vdev { uint64_t sav_object; /* MOS object for device list */ nvlist_t *sav_config; /* cached device config */ vdev_t **sav_vdevs; /* devices */ int sav_count; /* number devices */ boolean_t sav_sync; /* sync the device list */ nvlist_t **sav_pending; /* pending device additions */ uint_t sav_npending; /* # pending devices */ }; typedef struct spa_config_lock { kmutex_t scl_lock; kthread_t *scl_writer; int scl_write_wanted; int scl_count; kcondvar_t scl_cv; } ____cacheline_aligned spa_config_lock_t; typedef struct spa_config_dirent { list_node_t scd_link; char *scd_path; } spa_config_dirent_t; typedef enum zio_taskq_type { ZIO_TASKQ_ISSUE = 0, ZIO_TASKQ_ISSUE_HIGH, ZIO_TASKQ_INTERRUPT, ZIO_TASKQ_INTERRUPT_HIGH, ZIO_TASKQ_TYPES } zio_taskq_type_t; /* * State machine for the zpool-poolname process. The states transitions * are done as follows: * * From To Routine * PROC_NONE -> PROC_CREATED spa_activate() * PROC_CREATED -> PROC_ACTIVE spa_thread() * PROC_ACTIVE -> PROC_DEACTIVATE spa_deactivate() * PROC_DEACTIVATE -> PROC_GONE spa_thread() * PROC_GONE -> PROC_NONE spa_deactivate() */ typedef enum spa_proc_state { SPA_PROC_NONE, /* spa_proc = &p0, no process created */ SPA_PROC_CREATED, /* spa_activate() has proc, is waiting */ SPA_PROC_ACTIVE, /* taskqs created, spa_proc set */ SPA_PROC_DEACTIVATE, /* spa_deactivate() requests process exit */ SPA_PROC_GONE /* spa_thread() is exiting, spa_proc = &p0 */ } spa_proc_state_t; typedef struct spa_taskqs { uint_t stqs_count; taskq_t **stqs_taskq; } spa_taskqs_t; /* one for each thread in the spa sync taskq */ typedef struct spa_syncthread_info { kthread_t *sti_thread; uint_t sti_allocator; } spa_syncthread_info_t; typedef enum spa_all_vdev_zap_action { AVZ_ACTION_NONE = 0, AVZ_ACTION_DESTROY, /* Destroy all per-vdev ZAPs and the AVZ. */ AVZ_ACTION_REBUILD, /* Populate the new AVZ, see spa_avz_rebuild */ AVZ_ACTION_INITIALIZE } spa_avz_action_t; typedef enum spa_config_source { SPA_CONFIG_SRC_NONE = 0, SPA_CONFIG_SRC_SCAN, /* scan of path (default: /dev/dsk) */ SPA_CONFIG_SRC_CACHEFILE, /* any cachefile */ SPA_CONFIG_SRC_TRYIMPORT, /* returned from call to tryimport */ SPA_CONFIG_SRC_SPLIT, /* new pool in a pool split */ SPA_CONFIG_SRC_MOS /* MOS, but not always from right txg */ } spa_config_source_t; struct spa { /* * Fields protected by spa_namespace_lock. */ char spa_name[ZFS_MAX_DATASET_NAME_LEN]; /* pool name */ char *spa_comment; /* comment */ avl_node_t spa_avl; /* node in spa_namespace_avl */ nvlist_t *spa_config; /* last synced config */ nvlist_t *spa_config_syncing; /* currently syncing config */ nvlist_t *spa_config_splitting; /* config for splitting */ nvlist_t *spa_load_info; /* info and errors from load */ uint64_t spa_config_txg; /* txg of last config change */ uint32_t spa_sync_pass; /* iterate-to-convergence */ pool_state_t spa_state; /* pool state */ int spa_inject_ref; /* injection references */ uint8_t spa_sync_on; /* sync threads are running */ spa_load_state_t spa_load_state; /* current load operation */ boolean_t spa_indirect_vdevs_loaded; /* mappings loaded? */ boolean_t spa_trust_config; /* do we trust vdev tree? */ boolean_t spa_is_splitting; /* in the middle of a split? */ spa_config_source_t spa_config_source; /* where config comes from? */ uint64_t spa_import_flags; /* import specific flags */ spa_taskqs_t spa_zio_taskq[ZIO_TYPES][ZIO_TASKQ_TYPES]; dsl_pool_t *spa_dsl_pool; boolean_t spa_is_initializing; /* true while opening pool */ boolean_t spa_is_exporting; /* true while exporting pool */ kthread_t *spa_export_thread; /* valid during pool export */ kthread_t *spa_load_thread; /* loading, no namespace lock */ metaslab_class_t *spa_normal_class; /* normal data class */ metaslab_class_t *spa_log_class; /* intent log data class */ metaslab_class_t *spa_embedded_log_class; /* log on normal vdevs */ metaslab_class_t *spa_special_class; /* special allocation class */ metaslab_class_t *spa_dedup_class; /* dedup allocation class */ uint64_t spa_first_txg; /* first txg after spa_open() */ uint64_t spa_final_txg; /* txg of export/destroy */ uint64_t spa_freeze_txg; /* freeze pool at this txg */ uint64_t spa_load_max_txg; /* best initial ub_txg */ uint64_t spa_claim_max_txg; /* highest claimed birth txg */ inode_timespec_t spa_loaded_ts; /* 1st successful open time */ objset_t *spa_meta_objset; /* copy of dp->dp_meta_objset */ kmutex_t spa_evicting_os_lock; /* Evicting objset list lock */ list_t spa_evicting_os_list; /* Objsets being evicted. */ kcondvar_t spa_evicting_os_cv; /* Objset Eviction Completion */ txg_list_t spa_vdev_txg_list; /* per-txg dirty vdev list */ vdev_t *spa_root_vdev; /* top-level vdev container */ uint64_t spa_min_ashift; /* of vdevs in normal class */ uint64_t spa_max_ashift; /* of vdevs in normal class */ uint64_t spa_min_alloc; /* of vdevs in normal class */ uint64_t spa_gcd_alloc; /* of vdevs in normal class */ uint64_t spa_config_guid; /* config pool guid */ uint64_t spa_load_guid; /* spa_load initialized guid */ uint64_t spa_last_synced_guid; /* last synced guid */ list_t spa_config_dirty_list; /* vdevs with dirty config */ list_t spa_state_dirty_list; /* vdevs with dirty state */ /* * spa_allocs is an array, whose lengths is stored in spa_alloc_count. * There is one tree and one lock for each allocator, to help improve * allocation performance in write-heavy workloads. */ spa_alloc_t *spa_allocs; spa_allocs_use_t *spa_allocs_use; int spa_alloc_count; int spa_active_allocator; /* selectable allocator */ /* per-allocator sync thread taskqs */ taskq_t *spa_sync_tq; spa_syncthread_info_t *spa_syncthreads; spa_aux_vdev_t spa_spares; /* hot spares */ spa_aux_vdev_t spa_l2cache; /* L2ARC cache devices */ boolean_t spa_aux_sync_uber; /* need to sync aux uber */ nvlist_t *spa_label_features; /* Features for reading MOS */ uint64_t spa_config_object; /* MOS object for pool config */ uint64_t spa_config_generation; /* config generation number */ uint64_t spa_syncing_txg; /* txg currently syncing */ bpobj_t spa_deferred_bpobj; /* deferred-free bplist */ bplist_t spa_free_bplist[TXG_SIZE]; /* bplist of stuff to free */ zio_cksum_salt_t spa_cksum_salt; /* secret salt for cksum */ /* checksum context templates */ kmutex_t spa_cksum_tmpls_lock; void *spa_cksum_tmpls[ZIO_CHECKSUM_FUNCTIONS]; uberblock_t spa_ubsync; /* last synced uberblock */ uberblock_t spa_uberblock; /* current uberblock */ boolean_t spa_extreme_rewind; /* rewind past deferred frees */ kmutex_t spa_scrub_lock; /* resilver/scrub lock */ uint64_t spa_scrub_inflight; /* in-flight scrub bytes */ /* in-flight verification bytes */ uint64_t spa_load_verify_bytes; kcondvar_t spa_scrub_io_cv; /* scrub I/O completion */ uint8_t spa_scrub_active; /* active or suspended? */ uint8_t spa_scrub_type; /* type of scrub we're doing */ uint8_t spa_scrub_finished; /* indicator to rotate logs */ uint8_t spa_scrub_started; /* started since last boot */ uint8_t spa_scrub_reopen; /* scrub doing vdev_reopen */ uint64_t spa_scan_pass_start; /* start time per pass/reboot */ uint64_t spa_scan_pass_scrub_pause; /* scrub pause time */ uint64_t spa_scan_pass_scrub_spent_paused; /* total paused */ uint64_t spa_scan_pass_exam; /* examined bytes per pass */ uint64_t spa_scan_pass_issued; /* issued bytes per pass */ /* error scrub pause time in milliseconds */ uint64_t spa_scan_pass_errorscrub_pause; /* total error scrub paused time in milliseconds */ uint64_t spa_scan_pass_errorscrub_spent_paused; /* * We are in the middle of a resilver, and another resilver * is needed once this one completes. This is set iff any * vdev_resilver_deferred is set. */ boolean_t spa_resilver_deferred; kmutex_t spa_async_lock; /* protect async state */ kthread_t *spa_async_thread; /* thread doing async task */ int spa_async_suspended; /* async tasks suspended */ kcondvar_t spa_async_cv; /* wait for thread_exit() */ uint16_t spa_async_tasks; /* async task mask */ uint64_t spa_missing_tvds; /* unopenable tvds on load */ uint64_t spa_missing_tvds_allowed; /* allow loading spa? */ uint64_t spa_nonallocating_dspace; spa_removing_phys_t spa_removing_phys; spa_vdev_removal_t *spa_vdev_removal; spa_condensing_indirect_phys_t spa_condensing_indirect_phys; spa_condensing_indirect_t *spa_condensing_indirect; zthr_t *spa_condense_zthr; /* zthr doing condense. */ vdev_raidz_expand_t *spa_raidz_expand; zthr_t *spa_raidz_expand_zthr; uint64_t spa_checkpoint_txg; /* the txg of the checkpoint */ spa_checkpoint_info_t spa_checkpoint_info; /* checkpoint accounting */ zthr_t *spa_checkpoint_discard_zthr; space_map_t *spa_syncing_log_sm; /* current log space map */ avl_tree_t spa_sm_logs_by_txg; kmutex_t spa_flushed_ms_lock; /* for metaslabs_by_flushed */ avl_tree_t spa_metaslabs_by_flushed; spa_unflushed_stats_t spa_unflushed_stats; list_t spa_log_summary; uint64_t spa_log_flushall_txg; zthr_t *spa_livelist_delete_zthr; /* deleting livelists */ zthr_t *spa_livelist_condense_zthr; /* condensing livelists */ uint64_t spa_livelists_to_delete; /* set of livelists to free */ livelist_condense_entry_t spa_to_condense; /* next to condense */ char *spa_root; /* alternate root directory */ uint64_t spa_ena; /* spa-wide ereport ENA */ int spa_last_open_failed; /* error if last open failed */ uint64_t spa_last_ubsync_txg; /* "best" uberblock txg */ uint64_t spa_last_ubsync_txg_ts; /* timestamp from that ub */ uint64_t spa_load_txg; /* ub txg that loaded */ uint64_t spa_load_txg_ts; /* timestamp from that ub */ uint64_t spa_load_meta_errors; /* verify metadata err count */ uint64_t spa_load_data_errors; /* verify data err count */ uint64_t spa_verify_min_txg; /* start txg of verify scrub */ kmutex_t spa_errlog_lock; /* error log lock */ uint64_t spa_errlog_last; /* last error log object */ uint64_t spa_errlog_scrub; /* scrub error log object */ kmutex_t spa_errlist_lock; /* error list/ereport lock */ avl_tree_t spa_errlist_last; /* last error list */ avl_tree_t spa_errlist_scrub; /* scrub error list */ avl_tree_t spa_errlist_healed; /* list of healed blocks */ uint64_t spa_deflate; /* should we deflate? */ uint64_t spa_history; /* history object */ kmutex_t spa_history_lock; /* history lock */ vdev_t *spa_pending_vdev; /* pending vdev additions */ kmutex_t spa_props_lock; /* property lock */ uint64_t spa_pool_props_object; /* object for properties */ uint64_t spa_bootfs; /* default boot filesystem */ uint64_t spa_failmode; /* failure mode for the pool */ uint64_t spa_deadman_failmode; /* failure mode for deadman */ uint64_t spa_delegation; /* delegation on/off */ list_t spa_config_list; /* previous cache file(s) */ /* per-CPU array of root of async I/O: */ zio_t **spa_async_zio_root; zio_t *spa_suspend_zio_root; /* root of all suspended I/O */ zio_t *spa_txg_zio[TXG_SIZE]; /* spa_sync() waits for this */ kmutex_t spa_suspend_lock; /* protects suspend_zio_root */ kcondvar_t spa_suspend_cv; /* notification of resume */ zio_suspend_reason_t spa_suspended; /* pool is suspended */ uint8_t spa_claiming; /* pool is doing zil_claim() */ boolean_t spa_is_root; /* pool is root */ int spa_minref; /* num refs when first opened */ spa_mode_t spa_mode; /* SPA_MODE_{READ|WRITE} */ boolean_t spa_read_spacemaps; /* spacemaps available if ro */ spa_log_state_t spa_log_state; /* log state */ uint64_t spa_autoexpand; /* lun expansion on/off */ ddt_t *spa_ddt[ZIO_CHECKSUM_FUNCTIONS]; /* in-core DDTs */ uint64_t spa_ddt_stat_object; /* DDT statistics */ uint64_t spa_dedup_dspace; /* Cache get_dedup_dspace() */ uint64_t spa_dedup_checksum; /* default dedup checksum */ uint64_t spa_dspace; /* dspace in normal class */ struct brt *spa_brt; /* in-core BRT */ kmutex_t spa_vdev_top_lock; /* dueling offline/remove */ kmutex_t spa_proc_lock; /* protects spa_proc* */ kcondvar_t spa_proc_cv; /* spa_proc_state transitions */ spa_proc_state_t spa_proc_state; /* see definition */ proc_t *spa_proc; /* "zpool-poolname" process */ uintptr_t spa_did; /* if procp != p0, did of t1 */ boolean_t spa_autoreplace; /* autoreplace set in open */ int spa_vdev_locks; /* locks grabbed */ uint64_t spa_creation_version; /* version at pool creation */ uint64_t spa_prev_software_version; /* See ub_software_version */ uint64_t spa_feat_for_write_obj; /* required to write to pool */ uint64_t spa_feat_for_read_obj; /* required to read from pool */ uint64_t spa_feat_desc_obj; /* Feature descriptions */ uint64_t spa_feat_enabled_txg_obj; /* Feature enabled txg */ kmutex_t spa_feat_stats_lock; /* protects spa_feat_stats */ nvlist_t *spa_feat_stats; /* Cache of enabled features */ /* cache feature refcounts */ uint64_t spa_feat_refcount_cache[SPA_FEATURES]; taskqid_t spa_deadman_tqid; /* Task id */ uint64_t spa_deadman_calls; /* number of deadman calls */ hrtime_t spa_sync_starttime; /* starting time of spa_sync */ uint64_t spa_deadman_synctime; /* deadman sync expiration */ uint64_t spa_deadman_ziotime; /* deadman zio expiration */ uint64_t spa_all_vdev_zaps; /* ZAP of per-vd ZAP obj #s */ spa_avz_action_t spa_avz_action; /* destroy/rebuild AVZ? */ uint64_t spa_autotrim; /* automatic background trim? */ uint64_t spa_errata; /* errata issues detected */ spa_stats_t spa_stats; /* assorted spa statistics */ spa_keystore_t spa_keystore; /* loaded crypto keys */ /* arc_memory_throttle() parameters during low memory condition */ uint64_t spa_lowmem_page_load; /* memory load during txg */ uint64_t spa_lowmem_last_txg; /* txg window start */ hrtime_t spa_ccw_fail_time; /* Conf cache write fail time */ taskq_t *spa_zvol_taskq; /* Taskq for minor management */ taskq_t *spa_metaslab_taskq; /* Taskq for metaslab preload */ taskq_t *spa_prefetch_taskq; /* Taskq for prefetch threads */ taskq_t *spa_upgrade_taskq; /* Taskq for upgrade jobs */ uint64_t spa_multihost; /* multihost aware (mmp) */ mmp_thread_t spa_mmp; /* multihost mmp thread */ list_t spa_leaf_list; /* list of leaf vdevs */ uint64_t spa_leaf_list_gen; /* track leaf_list changes */ uint32_t spa_hostid; /* cached system hostid */ /* synchronization for threads in spa_wait */ kmutex_t spa_activities_lock; kcondvar_t spa_activities_cv; kcondvar_t spa_waiters_cv; int spa_waiters; /* number of waiting threads */ boolean_t spa_waiters_cancel; /* waiters should return */ char *spa_compatibility; /* compatibility file(s) */ + uint64_t spa_dedup_table_quota; /* property DDT maximum size */ + uint64_t spa_dedup_dsize; /* cached on-disk size of DDT */ + uint64_t spa_dedup_class_full_txg; /* txg dedup class was full */ /* * spa_refcount & spa_config_lock must be the last elements * because zfs_refcount_t changes size based on compilation options. * In order for the MDB module to function correctly, the other * fields must remain in the same location. */ spa_config_lock_t spa_config_lock[SCL_LOCKS]; /* config changes */ zfs_refcount_t spa_refcount; /* number of opens */ }; extern char *spa_config_path; extern const char *zfs_deadman_failmode; extern uint_t spa_slop_shift; extern void spa_taskq_dispatch(spa_t *spa, zio_type_t t, zio_taskq_type_t q, task_func_t *func, zio_t *zio, boolean_t cutinline); extern void spa_load_spares(spa_t *spa); extern void spa_load_l2cache(spa_t *spa); extern sysevent_t *spa_event_create(spa_t *spa, vdev_t *vd, nvlist_t *hist_nvl, const char *name); extern void spa_event_post(sysevent_t *ev); extern int param_set_deadman_failmode_common(const char *val); extern void spa_set_deadman_synctime(hrtime_t ns); extern void spa_set_deadman_ziotime(hrtime_t ns); extern const char *spa_history_zone(void); extern const char *zfs_active_allocator; extern int param_set_active_allocator_common(const char *val); #ifdef __cplusplus } #endif #endif /* _SYS_SPA_IMPL_H */ diff --git a/lib/libzfs/libzfs.abi b/lib/libzfs/libzfs.abi index a75f5bbb47b0..aee6e59c6bf8 100644 --- a/lib/libzfs/libzfs.abi +++ b/lib/libzfs/libzfs.abi @@ -1,9738 +1,9740 @@ - + + + diff --git a/lib/libzfs/libzfs_pool.c b/lib/libzfs/libzfs_pool.c index d5e934045f40..9896948a2248 100644 --- a/lib/libzfs/libzfs_pool.c +++ b/lib/libzfs/libzfs_pool.c @@ -1,5492 +1,5511 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2016 Igor Kozhukhov * Copyright (c) 2018 Datto Inc. * Copyright (c) 2017 Open-E, Inc. All Rights Reserved. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2018, loli10K * Copyright (c) 2021, Colm Buckley * Copyright (c) 2021, 2023, Klara Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_namecheck.h" #include "zfs_prop.h" #include "libzfs_impl.h" #include "zfs_comutil.h" #include "zfeature_common.h" static boolean_t zpool_vdev_is_interior(const char *name); typedef struct prop_flags { unsigned int create:1; /* Validate property on creation */ unsigned int import:1; /* Validate property on import */ unsigned int vdevprop:1; /* Validate property as a VDEV property */ } prop_flags_t; /* * ==================================================================== * zpool property functions * ==================================================================== */ static int zpool_get_all_props(zpool_handle_t *zhp) { zfs_cmd_t zc = {"\0"}; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zcmd_alloc_dst_nvlist(hdl, &zc, 0); while (zfs_ioctl(hdl, ZFS_IOC_POOL_GET_PROPS, &zc) != 0) { if (errno == ENOMEM) zcmd_expand_dst_nvlist(hdl, &zc); else { zcmd_free_nvlists(&zc); return (-1); } } if (zcmd_read_dst_nvlist(hdl, &zc, &zhp->zpool_props) != 0) { zcmd_free_nvlists(&zc); return (-1); } zcmd_free_nvlists(&zc); return (0); } int zpool_props_refresh(zpool_handle_t *zhp) { nvlist_t *old_props; old_props = zhp->zpool_props; if (zpool_get_all_props(zhp) != 0) return (-1); nvlist_free(old_props); return (0); } static const char * zpool_get_prop_string(zpool_handle_t *zhp, zpool_prop_t prop, zprop_source_t *src) { nvlist_t *nv, *nvl; const char *value; zprop_source_t source; nvl = zhp->zpool_props; if (nvlist_lookup_nvlist(nvl, zpool_prop_to_name(prop), &nv) == 0) { source = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); value = fnvlist_lookup_string(nv, ZPROP_VALUE); } else { source = ZPROP_SRC_DEFAULT; if ((value = zpool_prop_default_string(prop)) == NULL) value = "-"; } if (src) *src = source; return (value); } uint64_t zpool_get_prop_int(zpool_handle_t *zhp, zpool_prop_t prop, zprop_source_t *src) { nvlist_t *nv, *nvl; uint64_t value; zprop_source_t source; if (zhp->zpool_props == NULL && zpool_get_all_props(zhp)) { /* * zpool_get_all_props() has most likely failed because * the pool is faulted, but if all we need is the top level * vdev's guid then get it from the zhp config nvlist. */ if ((prop == ZPOOL_PROP_GUID) && (nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nv) == 0) && (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &value) == 0)) { return (value); } return (zpool_prop_default_numeric(prop)); } nvl = zhp->zpool_props; if (nvlist_lookup_nvlist(nvl, zpool_prop_to_name(prop), &nv) == 0) { source = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); value = fnvlist_lookup_uint64(nv, ZPROP_VALUE); } else { source = ZPROP_SRC_DEFAULT; value = zpool_prop_default_numeric(prop); } if (src) *src = source; return (value); } /* * Map VDEV STATE to printed strings. */ const char * zpool_state_to_name(vdev_state_t state, vdev_aux_t aux) { switch (state) { case VDEV_STATE_CLOSED: case VDEV_STATE_OFFLINE: return (gettext("OFFLINE")); case VDEV_STATE_REMOVED: return (gettext("REMOVED")); case VDEV_STATE_CANT_OPEN: if (aux == VDEV_AUX_CORRUPT_DATA || aux == VDEV_AUX_BAD_LOG) return (gettext("FAULTED")); else if (aux == VDEV_AUX_SPLIT_POOL) return (gettext("SPLIT")); else return (gettext("UNAVAIL")); case VDEV_STATE_FAULTED: return (gettext("FAULTED")); case VDEV_STATE_DEGRADED: return (gettext("DEGRADED")); case VDEV_STATE_HEALTHY: return (gettext("ONLINE")); default: break; } return (gettext("UNKNOWN")); } /* * Map POOL STATE to printed strings. */ const char * zpool_pool_state_to_name(pool_state_t state) { switch (state) { default: break; case POOL_STATE_ACTIVE: return (gettext("ACTIVE")); case POOL_STATE_EXPORTED: return (gettext("EXPORTED")); case POOL_STATE_DESTROYED: return (gettext("DESTROYED")); case POOL_STATE_SPARE: return (gettext("SPARE")); case POOL_STATE_L2CACHE: return (gettext("L2CACHE")); case POOL_STATE_UNINITIALIZED: return (gettext("UNINITIALIZED")); case POOL_STATE_UNAVAIL: return (gettext("UNAVAIL")); case POOL_STATE_POTENTIALLY_ACTIVE: return (gettext("POTENTIALLY_ACTIVE")); } return (gettext("UNKNOWN")); } /* * Given a pool handle, return the pool health string ("ONLINE", "DEGRADED", * "SUSPENDED", etc). */ const char * zpool_get_state_str(zpool_handle_t *zhp) { zpool_errata_t errata; zpool_status_t status; const char *str; status = zpool_get_status(zhp, NULL, &errata); if (zpool_get_state(zhp) == POOL_STATE_UNAVAIL) { str = gettext("FAULTED"); } else if (status == ZPOOL_STATUS_IO_FAILURE_WAIT || status == ZPOOL_STATUS_IO_FAILURE_CONTINUE || status == ZPOOL_STATUS_IO_FAILURE_MMP) { str = gettext("SUSPENDED"); } else { nvlist_t *nvroot = fnvlist_lookup_nvlist( zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE); uint_t vsc; vdev_stat_t *vs = (vdev_stat_t *)fnvlist_lookup_uint64_array( nvroot, ZPOOL_CONFIG_VDEV_STATS, &vsc); str = zpool_state_to_name(vs->vs_state, vs->vs_aux); } return (str); } /* * Get a zpool property value for 'prop' and return the value in * a pre-allocated buffer. */ int zpool_get_prop(zpool_handle_t *zhp, zpool_prop_t prop, char *buf, size_t len, zprop_source_t *srctype, boolean_t literal) { uint64_t intval; const char *strval; zprop_source_t src = ZPROP_SRC_NONE; if (zpool_get_state(zhp) == POOL_STATE_UNAVAIL) { switch (prop) { case ZPOOL_PROP_NAME: (void) strlcpy(buf, zpool_get_name(zhp), len); break; case ZPOOL_PROP_HEALTH: (void) strlcpy(buf, zpool_get_state_str(zhp), len); break; case ZPOOL_PROP_GUID: intval = zpool_get_prop_int(zhp, prop, &src); (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); break; case ZPOOL_PROP_ALTROOT: case ZPOOL_PROP_CACHEFILE: case ZPOOL_PROP_COMMENT: case ZPOOL_PROP_COMPATIBILITY: if (zhp->zpool_props != NULL || zpool_get_all_props(zhp) == 0) { (void) strlcpy(buf, zpool_get_prop_string(zhp, prop, &src), len); break; } zfs_fallthrough; default: (void) strlcpy(buf, "-", len); break; } if (srctype != NULL) *srctype = src; return (0); } if (zhp->zpool_props == NULL && zpool_get_all_props(zhp) && prop != ZPOOL_PROP_NAME) return (-1); switch (zpool_prop_get_type(prop)) { case PROP_TYPE_STRING: (void) strlcpy(buf, zpool_get_prop_string(zhp, prop, &src), len); break; case PROP_TYPE_NUMBER: intval = zpool_get_prop_int(zhp, prop, &src); switch (prop) { + case ZPOOL_PROP_DEDUP_TABLE_QUOTA: + /* + * If dedup quota is 0, we translate this into 'none' + * (unless literal is set). And if it is UINT64_MAX + * we translate that as 'automatic' (limit to size of + * the dedicated dedup VDEV. Otherwise, fall throught + * into the regular number formating. + */ + if (intval == 0) { + (void) strlcpy(buf, literal ? "0" : "none", + len); + break; + } else if (intval == UINT64_MAX) { + (void) strlcpy(buf, "auto", len); + break; + } + zfs_fallthrough; + case ZPOOL_PROP_SIZE: case ZPOOL_PROP_ALLOCATED: case ZPOOL_PROP_FREE: case ZPOOL_PROP_FREEING: case ZPOOL_PROP_LEAKED: case ZPOOL_PROP_ASHIFT: case ZPOOL_PROP_MAXBLOCKSIZE: case ZPOOL_PROP_MAXDNODESIZE: case ZPOOL_PROP_BCLONESAVED: case ZPOOL_PROP_BCLONEUSED: + case ZPOOL_PROP_DEDUP_TABLE_SIZE: if (literal) (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); else (void) zfs_nicenum(intval, buf, len); break; case ZPOOL_PROP_EXPANDSZ: case ZPOOL_PROP_CHECKPOINT: if (intval == 0) { (void) strlcpy(buf, "-", len); } else if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) zfs_nicebytes(intval, buf, len); } break; case ZPOOL_PROP_CAPACITY: if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) snprintf(buf, len, "%llu%%", (u_longlong_t)intval); } break; case ZPOOL_PROP_FRAGMENTATION: if (intval == UINT64_MAX) { (void) strlcpy(buf, "-", len); } else if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) snprintf(buf, len, "%llu%%", (u_longlong_t)intval); } break; case ZPOOL_PROP_BCLONERATIO: case ZPOOL_PROP_DEDUPRATIO: if (literal) (void) snprintf(buf, len, "%llu.%02llu", (u_longlong_t)(intval / 100), (u_longlong_t)(intval % 100)); else (void) snprintf(buf, len, "%llu.%02llux", (u_longlong_t)(intval / 100), (u_longlong_t)(intval % 100)); break; case ZPOOL_PROP_HEALTH: (void) strlcpy(buf, zpool_get_state_str(zhp), len); break; case ZPOOL_PROP_VERSION: if (intval >= SPA_VERSION_FEATURES) { (void) snprintf(buf, len, "-"); break; } zfs_fallthrough; default: (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } break; case PROP_TYPE_INDEX: intval = zpool_get_prop_int(zhp, prop, &src); if (zpool_prop_index_to_string(prop, intval, &strval) != 0) return (-1); (void) strlcpy(buf, strval, len); break; default: abort(); } if (srctype) *srctype = src; return (0); } /* * Get a zpool property value for 'propname' and return the value in * a pre-allocated buffer. */ int zpool_get_userprop(zpool_handle_t *zhp, const char *propname, char *buf, size_t len, zprop_source_t *srctype) { nvlist_t *nv, *nvl; uint64_t ival; const char *value; zprop_source_t source = ZPROP_SRC_LOCAL; nvl = zhp->zpool_props; if (nvlist_lookup_nvlist(nvl, propname, &nv) == 0) { if (nvlist_lookup_uint64(nv, ZPROP_SOURCE, &ival) == 0) source = ival; verify(nvlist_lookup_string(nv, ZPROP_VALUE, &value) == 0); } else { source = ZPROP_SRC_DEFAULT; value = "-"; } if (srctype) *srctype = source; (void) strlcpy(buf, value, len); return (0); } /* * Check if the bootfs name has the same pool name as it is set to. * Assuming bootfs is a valid dataset name. */ static boolean_t bootfs_name_valid(const char *pool, const char *bootfs) { int len = strlen(pool); if (bootfs[0] == '\0') return (B_TRUE); if (!zfs_name_valid(bootfs, ZFS_TYPE_FILESYSTEM|ZFS_TYPE_SNAPSHOT)) return (B_FALSE); if (strncmp(pool, bootfs, len) == 0 && (bootfs[len] == '/' || bootfs[len] == '\0')) return (B_TRUE); return (B_FALSE); } /* * Given an nvlist of zpool properties to be set, validate that they are * correct, and parse any numeric properties (index, boolean, etc) if they are * specified as strings. */ static nvlist_t * zpool_valid_proplist(libzfs_handle_t *hdl, const char *poolname, nvlist_t *props, uint64_t version, prop_flags_t flags, char *errbuf) { nvpair_t *elem; nvlist_t *retprops; zpool_prop_t prop; const char *strval; uint64_t intval; const char *slash, *check; struct stat64 statbuf; zpool_handle_t *zhp; char report[1024]; if (nvlist_alloc(&retprops, NV_UNIQUE_NAME, 0) != 0) { (void) no_memory(hdl); return (NULL); } elem = NULL; while ((elem = nvlist_next_nvpair(props, elem)) != NULL) { const char *propname = nvpair_name(elem); if (flags.vdevprop && zpool_prop_vdev(propname)) { vdev_prop_t vprop = vdev_name_to_prop(propname); if (vdev_prop_readonly(vprop)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' " "is readonly"), propname); (void) zfs_error(hdl, EZFS_PROPREADONLY, errbuf); goto error; } if (zprop_parse_value(hdl, elem, vprop, ZFS_TYPE_VDEV, retprops, &strval, &intval, errbuf) != 0) goto error; continue; } else if (flags.vdevprop && vdev_prop_user(propname)) { if (nvlist_add_nvpair(retprops, elem) != 0) { (void) no_memory(hdl); goto error; } continue; } else if (flags.vdevprop) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid property: '%s'"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } prop = zpool_name_to_prop(propname); if (prop == ZPOOL_PROP_INVAL && zpool_prop_feature(propname)) { int err; char *fname = strchr(propname, '@') + 1; err = zfeature_lookup_name(fname, NULL); if (err != 0) { ASSERT3U(err, ==, ENOENT); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "feature '%s' unsupported by kernel"), fname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (nvpair_type(elem) != DATA_TYPE_STRING) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be a string"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } (void) nvpair_value_string(elem, &strval); if (strcmp(strval, ZFS_FEATURE_ENABLED) != 0 && strcmp(strval, ZFS_FEATURE_DISABLED) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set to " "'enabled' or 'disabled'"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (!flags.create && strcmp(strval, ZFS_FEATURE_DISABLED) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set to " "'disabled' at creation time"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (nvlist_add_uint64(retprops, propname, 0) != 0) { (void) no_memory(hdl); goto error; } continue; } else if (prop == ZPOOL_PROP_INVAL && zfs_prop_user(propname)) { /* * This is a user property: make sure it's a * string, and that it's less than ZAP_MAXNAMELEN. */ if (nvpair_type(elem) != DATA_TYPE_STRING) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be a string"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (strlen(nvpair_name(elem)) >= ZAP_MAXNAMELEN) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property name '%s' is too long"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } (void) nvpair_value_string(elem, &strval); if (strlen(strval) >= ZFS_MAXPROPLEN) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property value '%s' is too long"), strval); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (nvlist_add_string(retprops, propname, strval) != 0) { (void) no_memory(hdl); goto error; } continue; } /* * Make sure this property is valid and applies to this type. */ if (prop == ZPOOL_PROP_INVAL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid property '%s'"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (zpool_prop_readonly(prop)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' " "is readonly"), propname); (void) zfs_error(hdl, EZFS_PROPREADONLY, errbuf); goto error; } if (!flags.create && zpool_prop_setonce(prop)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set at " "creation time"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (zprop_parse_value(hdl, elem, prop, ZFS_TYPE_POOL, retprops, &strval, &intval, errbuf) != 0) goto error; /* * Perform additional checking for specific properties. */ switch (prop) { case ZPOOL_PROP_VERSION: if (intval < version || !SPA_VERSION_IS_SUPPORTED(intval)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' number %llu is invalid."), propname, (unsigned long long)intval); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); goto error; } break; case ZPOOL_PROP_ASHIFT: if (intval != 0 && (intval < ASHIFT_MIN || intval > ASHIFT_MAX)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' number %llu is invalid, " "only values between %" PRId32 " and %" PRId32 " are allowed."), propname, (unsigned long long)intval, ASHIFT_MIN, ASHIFT_MAX); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } break; case ZPOOL_PROP_BOOTFS: if (flags.create || flags.import) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' cannot be set at creation " "or import time"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (version < SPA_VERSION_BOOTFS) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to support " "'%s' property"), propname); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); goto error; } /* * bootfs property value has to be a dataset name and * the dataset has to be in the same pool as it sets to. */ if (!bootfs_name_valid(poolname, strval)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' " "is an invalid name"), strval); (void) zfs_error(hdl, EZFS_INVALIDNAME, errbuf); goto error; } if ((zhp = zpool_open_canfail(hdl, poolname)) == NULL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "could not open pool '%s'"), poolname); (void) zfs_error(hdl, EZFS_OPENFAILED, errbuf); goto error; } zpool_close(zhp); break; case ZPOOL_PROP_ALTROOT: if (!flags.create && !flags.import) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set during pool " "creation or import"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (strval[0] != '/') { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "bad alternate root '%s'"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } break; case ZPOOL_PROP_CACHEFILE: if (strval[0] == '\0') break; if (strcmp(strval, "none") == 0) break; if (strval[0] != '/') { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' must be empty, an " "absolute path, or 'none'"), propname); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } slash = strrchr(strval, '/'); if (slash[1] == '\0' || strcmp(slash, "/.") == 0 || strcmp(slash, "/..") == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is not a valid file"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } *(char *)slash = '\0'; if (strval[0] != '\0' && (stat64(strval, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))) { *(char *)slash = '/'; zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is not a valid directory"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } *(char *)slash = '/'; break; case ZPOOL_PROP_COMPATIBILITY: switch (zpool_load_compat(strval, NULL, report, 1024)) { case ZPOOL_COMPATIBILITY_OK: case ZPOOL_COMPATIBILITY_WARNTOKEN: break; case ZPOOL_COMPATIBILITY_BADFILE: case ZPOOL_COMPATIBILITY_BADTOKEN: case ZPOOL_COMPATIBILITY_NOFILES: zfs_error_aux(hdl, "%s", report); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } break; case ZPOOL_PROP_COMMENT: for (check = strval; *check != '\0'; check++) { if (!isprint(*check)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "comment may only have printable " "characters")); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } } if (strlen(strval) > ZPROP_MAX_COMMENT) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "comment must not exceed %d characters"), ZPROP_MAX_COMMENT); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } break; case ZPOOL_PROP_READONLY: if (!flags.import) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set at " "import time"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } break; case ZPOOL_PROP_MULTIHOST: if (get_system_hostid() == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "requires a non-zero system hostid")); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } break; case ZPOOL_PROP_DEDUPDITTO: printf("Note: property '%s' no longer has " "any effect\n", propname); break; default: break; } } return (retprops); error: nvlist_free(retprops); return (NULL); } /* * Set zpool property : propname=propval. */ int zpool_set_prop(zpool_handle_t *zhp, const char *propname, const char *propval) { zfs_cmd_t zc = {"\0"}; int ret = -1; char errbuf[ERRBUFLEN]; nvlist_t *nvl = NULL; nvlist_t *realprops; uint64_t version; prop_flags_t flags = { 0 }; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot set property for '%s'"), zhp->zpool_name); if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); if (nvlist_add_string(nvl, propname, propval) != 0) { nvlist_free(nvl); return (no_memory(zhp->zpool_hdl)); } version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if ((realprops = zpool_valid_proplist(zhp->zpool_hdl, zhp->zpool_name, nvl, version, flags, errbuf)) == NULL) { nvlist_free(nvl); return (-1); } nvlist_free(nvl); nvl = realprops; /* * Execute the corresponding ioctl() to set this property. */ (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zcmd_write_src_nvlist(zhp->zpool_hdl, &zc, nvl); ret = zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_SET_PROPS, &zc); zcmd_free_nvlists(&zc); nvlist_free(nvl); if (ret) (void) zpool_standard_error(zhp->zpool_hdl, errno, errbuf); else (void) zpool_props_refresh(zhp); return (ret); } int zpool_expand_proplist(zpool_handle_t *zhp, zprop_list_t **plp, zfs_type_t type, boolean_t literal) { libzfs_handle_t *hdl = zhp->zpool_hdl; zprop_list_t *entry; char buf[ZFS_MAXPROPLEN]; nvlist_t *features = NULL; nvpair_t *nvp; zprop_list_t **last; boolean_t firstexpand = (NULL == *plp); int i; if (zprop_expand_list(hdl, plp, type) != 0) return (-1); if (type == ZFS_TYPE_VDEV) return (0); last = plp; while (*last != NULL) last = &(*last)->pl_next; if ((*plp)->pl_all) features = zpool_get_features(zhp); if ((*plp)->pl_all && firstexpand) { /* Handle userprops in the all properties case */ if (zhp->zpool_props == NULL && zpool_props_refresh(zhp)) return (-1); nvp = NULL; while ((nvp = nvlist_next_nvpair(zhp->zpool_props, nvp)) != NULL) { const char *propname = nvpair_name(nvp); if (!zfs_prop_user(propname)) continue; entry = zfs_alloc(hdl, sizeof (zprop_list_t)); entry->pl_prop = ZPROP_USERPROP; entry->pl_user_prop = zfs_strdup(hdl, propname); entry->pl_width = strlen(entry->pl_user_prop); entry->pl_all = B_TRUE; *last = entry; last = &entry->pl_next; } for (i = 0; i < SPA_FEATURES; i++) { entry = zfs_alloc(hdl, sizeof (zprop_list_t)); entry->pl_prop = ZPROP_USERPROP; entry->pl_user_prop = zfs_asprintf(hdl, "feature@%s", spa_feature_table[i].fi_uname); entry->pl_width = strlen(entry->pl_user_prop); entry->pl_all = B_TRUE; *last = entry; last = &entry->pl_next; } } /* add any unsupported features */ for (nvp = nvlist_next_nvpair(features, NULL); nvp != NULL; nvp = nvlist_next_nvpair(features, nvp)) { char *propname; boolean_t found; if (zfeature_is_supported(nvpair_name(nvp))) continue; propname = zfs_asprintf(hdl, "unsupported@%s", nvpair_name(nvp)); /* * Before adding the property to the list make sure that no * other pool already added the same property. */ found = B_FALSE; entry = *plp; while (entry != NULL) { if (entry->pl_user_prop != NULL && strcmp(propname, entry->pl_user_prop) == 0) { found = B_TRUE; break; } entry = entry->pl_next; } if (found) { free(propname); continue; } entry = zfs_alloc(hdl, sizeof (zprop_list_t)); entry->pl_prop = ZPROP_USERPROP; entry->pl_user_prop = propname; entry->pl_width = strlen(entry->pl_user_prop); entry->pl_all = B_TRUE; *last = entry; last = &entry->pl_next; } for (entry = *plp; entry != NULL; entry = entry->pl_next) { if (entry->pl_fixed && !literal) continue; if (entry->pl_prop != ZPROP_USERPROP && zpool_get_prop(zhp, entry->pl_prop, buf, sizeof (buf), NULL, literal) == 0) { if (strlen(buf) > entry->pl_width) entry->pl_width = strlen(buf); } else if (entry->pl_prop == ZPROP_INVAL && zfs_prop_user(entry->pl_user_prop) && zpool_get_userprop(zhp, entry->pl_user_prop, buf, sizeof (buf), NULL) == 0) { if (strlen(buf) > entry->pl_width) entry->pl_width = strlen(buf); } } return (0); } int vdev_expand_proplist(zpool_handle_t *zhp, const char *vdevname, zprop_list_t **plp) { zprop_list_t *entry; char buf[ZFS_MAXPROPLEN]; const char *strval = NULL; int err = 0; nvpair_t *elem = NULL; nvlist_t *vprops = NULL; nvlist_t *propval = NULL; const char *propname; vdev_prop_t prop; zprop_list_t **last; for (entry = *plp; entry != NULL; entry = entry->pl_next) { if (entry->pl_fixed) continue; if (zpool_get_vdev_prop(zhp, vdevname, entry->pl_prop, entry->pl_user_prop, buf, sizeof (buf), NULL, B_FALSE) == 0) { if (strlen(buf) > entry->pl_width) entry->pl_width = strlen(buf); } if (entry->pl_prop == VDEV_PROP_NAME && strlen(vdevname) > entry->pl_width) entry->pl_width = strlen(vdevname); } /* Handle the all properties case */ last = plp; if (*last != NULL && (*last)->pl_all == B_TRUE) { while (*last != NULL) last = &(*last)->pl_next; err = zpool_get_all_vdev_props(zhp, vdevname, &vprops); if (err != 0) return (err); while ((elem = nvlist_next_nvpair(vprops, elem)) != NULL) { propname = nvpair_name(elem); /* Skip properties that are not user defined */ if ((prop = vdev_name_to_prop(propname)) != VDEV_PROP_USERPROP) continue; if (nvpair_value_nvlist(elem, &propval) != 0) continue; strval = fnvlist_lookup_string(propval, ZPROP_VALUE); entry = zfs_alloc(zhp->zpool_hdl, sizeof (zprop_list_t)); entry->pl_prop = prop; entry->pl_user_prop = zfs_strdup(zhp->zpool_hdl, propname); entry->pl_width = strlen(strval); entry->pl_all = B_TRUE; *last = entry; last = &entry->pl_next; } } return (0); } /* * Get the state for the given feature on the given ZFS pool. */ int zpool_prop_get_feature(zpool_handle_t *zhp, const char *propname, char *buf, size_t len) { uint64_t refcount; boolean_t found = B_FALSE; nvlist_t *features = zpool_get_features(zhp); boolean_t supported; const char *feature = strchr(propname, '@') + 1; supported = zpool_prop_feature(propname); ASSERT(supported || zpool_prop_unsupported(propname)); /* * Convert from feature name to feature guid. This conversion is * unnecessary for unsupported@... properties because they already * use guids. */ if (supported) { int ret; spa_feature_t fid; ret = zfeature_lookup_name(feature, &fid); if (ret != 0) { (void) strlcpy(buf, "-", len); return (ENOTSUP); } feature = spa_feature_table[fid].fi_guid; } if (nvlist_lookup_uint64(features, feature, &refcount) == 0) found = B_TRUE; if (supported) { if (!found) { (void) strlcpy(buf, ZFS_FEATURE_DISABLED, len); } else { if (refcount == 0) (void) strlcpy(buf, ZFS_FEATURE_ENABLED, len); else (void) strlcpy(buf, ZFS_FEATURE_ACTIVE, len); } } else { if (found) { if (refcount == 0) { (void) strcpy(buf, ZFS_UNSUPPORTED_INACTIVE); } else { (void) strcpy(buf, ZFS_UNSUPPORTED_READONLY); } } else { (void) strlcpy(buf, "-", len); return (ENOTSUP); } } return (0); } /* * Validate the given pool name, optionally putting an extended error message in * 'buf'. */ boolean_t zpool_name_valid(libzfs_handle_t *hdl, boolean_t isopen, const char *pool) { namecheck_err_t why; char what; int ret; ret = pool_namecheck(pool, &why, &what); /* * The rules for reserved pool names were extended at a later point. * But we need to support users with existing pools that may now be * invalid. So we only check for this expanded set of names during a * create (or import), and only in userland. */ if (ret == 0 && !isopen && (strncmp(pool, "mirror", 6) == 0 || strncmp(pool, "raidz", 5) == 0 || strncmp(pool, "draid", 5) == 0 || strncmp(pool, "spare", 5) == 0 || strcmp(pool, "log") == 0)) { if (hdl != NULL) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); return (B_FALSE); } if (ret != 0) { if (hdl != NULL) { switch (why) { case NAME_ERR_TOOLONG: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is too long")); break; case NAME_ERR_INVALCHAR: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid character " "'%c' in pool name"), what); break; case NAME_ERR_NOLETTER: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name must begin with a letter")); break; case NAME_ERR_RESERVED: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); break; case NAME_ERR_DISKLIKE: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool name is reserved")); break; case NAME_ERR_LEADING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "leading slash in name")); break; case NAME_ERR_EMPTY_COMPONENT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "empty component in name")); break; case NAME_ERR_TRAILING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "trailing slash in name")); break; case NAME_ERR_MULTIPLE_DELIMITERS: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "multiple '@' and/or '#' delimiters in " "name")); break; case NAME_ERR_NO_AT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "permission set is missing '@'")); break; default: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "(%d) not defined"), why); break; } } return (B_FALSE); } return (B_TRUE); } /* * Open a handle to the given pool, even if the pool is currently in the FAULTED * state. */ zpool_handle_t * zpool_open_canfail(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; boolean_t missing; /* * Make sure the pool name is valid. */ if (!zpool_name_valid(hdl, B_TRUE, pool)) { (void) zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); return (NULL); } zhp = zfs_alloc(hdl, sizeof (zpool_handle_t)); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (NULL); } if (missing) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no such pool")); (void) zfs_error_fmt(hdl, EZFS_NOENT, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); zpool_close(zhp); return (NULL); } return (zhp); } /* * Like the above, but silent on error. Used when iterating over pools (because * the configuration cache may be out of date). */ int zpool_open_silent(libzfs_handle_t *hdl, const char *pool, zpool_handle_t **ret) { zpool_handle_t *zhp; boolean_t missing; zhp = zfs_alloc(hdl, sizeof (zpool_handle_t)); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (-1); } if (missing) { zpool_close(zhp); *ret = NULL; return (0); } *ret = zhp; return (0); } /* * Similar to zpool_open_canfail(), but refuses to open pools in the faulted * state. */ zpool_handle_t * zpool_open(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; if ((zhp = zpool_open_canfail(hdl, pool)) == NULL) return (NULL); if (zhp->zpool_state == POOL_STATE_UNAVAIL) { (void) zfs_error_fmt(hdl, EZFS_POOLUNAVAIL, dgettext(TEXT_DOMAIN, "cannot open '%s'"), zhp->zpool_name); zpool_close(zhp); return (NULL); } return (zhp); } /* * Close the handle. Simply frees the memory associated with the handle. */ void zpool_close(zpool_handle_t *zhp) { nvlist_free(zhp->zpool_config); nvlist_free(zhp->zpool_old_config); nvlist_free(zhp->zpool_props); free(zhp); } /* * Return the name of the pool. */ const char * zpool_get_name(zpool_handle_t *zhp) { return (zhp->zpool_name); } /* * Return the state of the pool (ACTIVE or UNAVAILABLE) */ int zpool_get_state(zpool_handle_t *zhp) { return (zhp->zpool_state); } /* * Check if vdev list contains a special vdev */ static boolean_t zpool_has_special_vdev(nvlist_t *nvroot) { nvlist_t **child; uint_t children; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (uint_t c = 0; c < children; c++) { const char *bias; if (nvlist_lookup_string(child[c], ZPOOL_CONFIG_ALLOCATION_BIAS, &bias) == 0 && strcmp(bias, VDEV_ALLOC_BIAS_SPECIAL) == 0) { return (B_TRUE); } } } return (B_FALSE); } /* * Check if vdev list contains a dRAID vdev */ static boolean_t zpool_has_draid_vdev(nvlist_t *nvroot) { nvlist_t **child; uint_t children; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (uint_t c = 0; c < children; c++) { const char *type; if (nvlist_lookup_string(child[c], ZPOOL_CONFIG_TYPE, &type) == 0 && strcmp(type, VDEV_TYPE_DRAID) == 0) { return (B_TRUE); } } } return (B_FALSE); } /* * Output a dRAID top-level vdev name in to the provided buffer. */ static char * zpool_draid_name(char *name, int len, uint64_t data, uint64_t parity, uint64_t spares, uint64_t children) { snprintf(name, len, "%s%llu:%llud:%lluc:%llus", VDEV_TYPE_DRAID, (u_longlong_t)parity, (u_longlong_t)data, (u_longlong_t)children, (u_longlong_t)spares); return (name); } /* * Return B_TRUE if the provided name is a dRAID spare name. */ boolean_t zpool_is_draid_spare(const char *name) { uint64_t spare_id, parity, vdev_id; if (sscanf(name, VDEV_TYPE_DRAID "%llu-%llu-%llu", (u_longlong_t *)&parity, (u_longlong_t *)&vdev_id, (u_longlong_t *)&spare_id) == 3) { return (B_TRUE); } return (B_FALSE); } /* * Create the named pool, using the provided vdev list. It is assumed * that the consumer has already validated the contents of the nvlist, so we * don't have to worry about error semantics. */ int zpool_create(libzfs_handle_t *hdl, const char *pool, nvlist_t *nvroot, nvlist_t *props, nvlist_t *fsprops) { zfs_cmd_t zc = {"\0"}; nvlist_t *zc_fsprops = NULL; nvlist_t *zc_props = NULL; nvlist_t *hidden_args = NULL; uint8_t *wkeydata = NULL; uint_t wkeylen = 0; char errbuf[ERRBUFLEN]; int ret = -1; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot create '%s'"), pool); if (!zpool_name_valid(hdl, B_FALSE, pool)) return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf)); zcmd_write_conf_nvlist(hdl, &zc, nvroot); if (props) { prop_flags_t flags = { .create = B_TRUE, .import = B_FALSE }; if ((zc_props = zpool_valid_proplist(hdl, pool, props, SPA_VERSION_1, flags, errbuf)) == NULL) { goto create_failed; } } if (fsprops) { uint64_t zoned; const char *zonestr; zoned = ((nvlist_lookup_string(fsprops, zfs_prop_to_name(ZFS_PROP_ZONED), &zonestr) == 0) && strcmp(zonestr, "on") == 0); if ((zc_fsprops = zfs_valid_proplist(hdl, ZFS_TYPE_FILESYSTEM, fsprops, zoned, NULL, NULL, B_TRUE, errbuf)) == NULL) { goto create_failed; } if (nvlist_exists(zc_fsprops, zfs_prop_to_name(ZFS_PROP_SPECIAL_SMALL_BLOCKS)) && !zpool_has_special_vdev(nvroot)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "%s property requires a special vdev"), zfs_prop_to_name(ZFS_PROP_SPECIAL_SMALL_BLOCKS)); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto create_failed; } if (!zc_props && (nvlist_alloc(&zc_props, NV_UNIQUE_NAME, 0) != 0)) { goto create_failed; } if (zfs_crypto_create(hdl, NULL, zc_fsprops, props, B_TRUE, &wkeydata, &wkeylen) != 0) { zfs_error(hdl, EZFS_CRYPTOFAILED, errbuf); goto create_failed; } if (nvlist_add_nvlist(zc_props, ZPOOL_ROOTFS_PROPS, zc_fsprops) != 0) { goto create_failed; } if (wkeydata != NULL) { if (nvlist_alloc(&hidden_args, NV_UNIQUE_NAME, 0) != 0) goto create_failed; if (nvlist_add_uint8_array(hidden_args, "wkeydata", wkeydata, wkeylen) != 0) goto create_failed; if (nvlist_add_nvlist(zc_props, ZPOOL_HIDDEN_ARGS, hidden_args) != 0) goto create_failed; } } if (zc_props) zcmd_write_src_nvlist(hdl, &zc, zc_props); (void) strlcpy(zc.zc_name, pool, sizeof (zc.zc_name)); if ((ret = zfs_ioctl(hdl, ZFS_IOC_POOL_CREATE, &zc)) != 0) { zcmd_free_nvlists(&zc); nvlist_free(zc_props); nvlist_free(zc_fsprops); nvlist_free(hidden_args); if (wkeydata != NULL) free(wkeydata); switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. This can also happen under if the device is * part of an active md or lvm device. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device, or " "one of\nthe devices is part of an active md or " "lvm device")); return (zfs_error(hdl, EZFS_BADDEV, errbuf)); case ERANGE: /* * This happens if the record size is smaller or larger * than the allowed size range, or not a power of 2. * * NOTE: although zfs_valid_proplist is called earlier, * this case may have slipped through since the * pool does not exist yet and it is therefore * impossible to read properties e.g. max blocksize * from the pool. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "record size invalid")); return (zfs_error(hdl, EZFS_BADPROP, errbuf)); case EOVERFLOW: /* * This occurs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicebytes(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is less than the " "minimum size (%s)"), buf); } return (zfs_error(hdl, EZFS_BADDEV, errbuf)); case ENOSPC: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is out of space")); return (zfs_error(hdl, EZFS_BADDEV, errbuf)); case EINVAL: if (zpool_has_draid_vdev(nvroot) && zfeature_lookup_name("draid", NULL) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dRAID vdevs are unsupported by the " "kernel")); return (zfs_error(hdl, EZFS_BADDEV, errbuf)); } else { return (zpool_standard_error(hdl, errno, errbuf)); } default: return (zpool_standard_error(hdl, errno, errbuf)); } } create_failed: zcmd_free_nvlists(&zc); nvlist_free(zc_props); nvlist_free(zc_fsprops); nvlist_free(hidden_args); if (wkeydata != NULL) free(wkeydata); return (ret); } /* * Destroy the given pool. It is up to the caller to ensure that there are no * datasets left in the pool. */ int zpool_destroy(zpool_handle_t *zhp, const char *log_str) { zfs_cmd_t zc = {"\0"}; zfs_handle_t *zfp = NULL; libzfs_handle_t *hdl = zhp->zpool_hdl; char errbuf[ERRBUFLEN]; if (zhp->zpool_state == POOL_STATE_ACTIVE && (zfp = zfs_open(hdl, zhp->zpool_name, ZFS_TYPE_FILESYSTEM)) == NULL) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_history = (uint64_t)(uintptr_t)log_str; if (zfs_ioctl(hdl, ZFS_IOC_POOL_DESTROY, &zc) != 0) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot destroy '%s'"), zhp->zpool_name); if (errno == EROFS) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is read only")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); } else { (void) zpool_standard_error(hdl, errno, errbuf); } if (zfp) zfs_close(zfp); return (-1); } if (zfp) { remove_mountpoint(zfp); zfs_close(zfp); } return (0); } /* * Create a checkpoint in the given pool. */ int zpool_checkpoint(zpool_handle_t *zhp) { libzfs_handle_t *hdl = zhp->zpool_hdl; char errbuf[ERRBUFLEN]; int error; error = lzc_pool_checkpoint(zhp->zpool_name); if (error != 0) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot checkpoint '%s'"), zhp->zpool_name); (void) zpool_standard_error(hdl, error, errbuf); return (-1); } return (0); } /* * Discard the checkpoint from the given pool. */ int zpool_discard_checkpoint(zpool_handle_t *zhp) { libzfs_handle_t *hdl = zhp->zpool_hdl; char errbuf[ERRBUFLEN]; int error; error = lzc_pool_checkpoint_discard(zhp->zpool_name); if (error != 0) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot discard checkpoint in '%s'"), zhp->zpool_name); (void) zpool_standard_error(hdl, error, errbuf); return (-1); } return (0); } /* * Add the given vdevs to the pool. The caller must have already performed the * necessary verification to ensure that the vdev specification is well-formed. */ int zpool_add(zpool_handle_t *zhp, nvlist_t *nvroot, boolean_t check_ashift) { zfs_cmd_t zc = {"\0"}; int ret; libzfs_handle_t *hdl = zhp->zpool_hdl; char errbuf[ERRBUFLEN]; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot add to '%s'"), zhp->zpool_name); if (zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL) < SPA_VERSION_SPARES && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be " "upgraded to add hot spares")); return (zfs_error(hdl, EZFS_BADVERSION, errbuf)); } if (zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL) < SPA_VERSION_L2CACHE && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be " "upgraded to add cache devices")); return (zfs_error(hdl, EZFS_BADVERSION, errbuf)); } zcmd_write_conf_nvlist(hdl, &zc, nvroot); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_flags = check_ashift; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_ADD, &zc) != 0) { switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case EINVAL: if (zpool_has_draid_vdev(nvroot) && zfeature_lookup_name("draid", NULL) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dRAID vdevs are unsupported by the " "kernel")); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid config; a pool with removing/" "removed vdevs does not support adding " "raidz or dRAID vdevs")); } (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case EOVERFLOW: /* * This occurs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicebytes(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is less than the minimum " "size (%s)"), buf); } (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case ENOTSUP: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to add these vdevs")); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); break; default: (void) zpool_standard_error(hdl, errno, errbuf); } ret = -1; } else { ret = 0; } zcmd_free_nvlists(&zc); return (ret); } /* * Exports the pool from the system. The caller must ensure that there are no * mounted datasets in the pool. */ static int zpool_export_common(zpool_handle_t *zhp, boolean_t force, boolean_t hardforce, const char *log_str) { zfs_cmd_t zc = {"\0"}; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = force; zc.zc_guid = hardforce; zc.zc_history = (uint64_t)(uintptr_t)log_str; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_EXPORT, &zc) != 0) { switch (errno) { case EXDEV: zfs_error_aux(zhp->zpool_hdl, dgettext(TEXT_DOMAIN, "use '-f' to override the following errors:\n" "'%s' has an active shared spare which could be" " used by other pools once '%s' is exported."), zhp->zpool_name, zhp->zpool_name); return (zfs_error_fmt(zhp->zpool_hdl, EZFS_ACTIVE_SPARE, dgettext(TEXT_DOMAIN, "cannot export '%s'"), zhp->zpool_name)); default: return (zpool_standard_error_fmt(zhp->zpool_hdl, errno, dgettext(TEXT_DOMAIN, "cannot export '%s'"), zhp->zpool_name)); } } return (0); } int zpool_export(zpool_handle_t *zhp, boolean_t force, const char *log_str) { return (zpool_export_common(zhp, force, B_FALSE, log_str)); } int zpool_export_force(zpool_handle_t *zhp, const char *log_str) { return (zpool_export_common(zhp, B_TRUE, B_TRUE, log_str)); } static void zpool_rewind_exclaim(libzfs_handle_t *hdl, const char *name, boolean_t dryrun, nvlist_t *config) { nvlist_t *nv = NULL; uint64_t rewindto; int64_t loss = -1; struct tm t; char timestr[128]; if (!hdl->libzfs_printerr || config == NULL) return; if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, &nv) != 0 || nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_REWIND_INFO, &nv) != 0) { return; } if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_TIME, &rewindto) != 0) return; (void) nvlist_lookup_int64(nv, ZPOOL_CONFIG_REWIND_TIME, &loss); if (localtime_r((time_t *)&rewindto, &t) != NULL && ctime_r((time_t *)&rewindto, timestr) != NULL) { timestr[24] = 0; if (dryrun) { (void) printf(dgettext(TEXT_DOMAIN, "Would be able to return %s " "to its state as of %s.\n"), name, timestr); } else { (void) printf(dgettext(TEXT_DOMAIN, "Pool %s returned to its state as of %s.\n"), name, timestr); } if (loss > 120) { (void) printf(dgettext(TEXT_DOMAIN, "%s approximately %lld "), dryrun ? "Would discard" : "Discarded", ((longlong_t)loss + 30) / 60); (void) printf(dgettext(TEXT_DOMAIN, "minutes of transactions.\n")); } else if (loss > 0) { (void) printf(dgettext(TEXT_DOMAIN, "%s approximately %lld "), dryrun ? "Would discard" : "Discarded", (longlong_t)loss); (void) printf(dgettext(TEXT_DOMAIN, "seconds of transactions.\n")); } } } void zpool_explain_recover(libzfs_handle_t *hdl, const char *name, int reason, nvlist_t *config) { nvlist_t *nv = NULL; int64_t loss = -1; uint64_t edata = UINT64_MAX; uint64_t rewindto; struct tm t; char timestr[128]; if (!hdl->libzfs_printerr) return; if (reason >= 0) (void) printf(dgettext(TEXT_DOMAIN, "action: ")); else (void) printf(dgettext(TEXT_DOMAIN, "\t")); /* All attempted rewinds failed if ZPOOL_CONFIG_LOAD_TIME missing */ if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, &nv) != 0 || nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_REWIND_INFO, &nv) != 0 || nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_TIME, &rewindto) != 0) goto no_info; (void) nvlist_lookup_int64(nv, ZPOOL_CONFIG_REWIND_TIME, &loss); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_DATA_ERRORS, &edata); (void) printf(dgettext(TEXT_DOMAIN, "Recovery is possible, but will result in some data loss.\n")); if (localtime_r((time_t *)&rewindto, &t) != NULL && ctime_r((time_t *)&rewindto, timestr) != NULL) { timestr[24] = 0; (void) printf(dgettext(TEXT_DOMAIN, "\tReturning the pool to its state as of %s\n" "\tshould correct the problem. "), timestr); } else { (void) printf(dgettext(TEXT_DOMAIN, "\tReverting the pool to an earlier state " "should correct the problem.\n\t")); } if (loss > 120) { (void) printf(dgettext(TEXT_DOMAIN, "Approximately %lld minutes of data\n" "\tmust be discarded, irreversibly. "), ((longlong_t)loss + 30) / 60); } else if (loss > 0) { (void) printf(dgettext(TEXT_DOMAIN, "Approximately %lld seconds of data\n" "\tmust be discarded, irreversibly. "), (longlong_t)loss); } if (edata != 0 && edata != UINT64_MAX) { if (edata == 1) { (void) printf(dgettext(TEXT_DOMAIN, "After rewind, at least\n" "\tone persistent user-data error will remain. ")); } else { (void) printf(dgettext(TEXT_DOMAIN, "After rewind, several\n" "\tpersistent user-data errors will remain. ")); } } (void) printf(dgettext(TEXT_DOMAIN, "Recovery can be attempted\n\tby executing 'zpool %s -F %s'. "), reason >= 0 ? "clear" : "import", name); (void) printf(dgettext(TEXT_DOMAIN, "A scrub of the pool\n" "\tis strongly recommended after recovery.\n")); return; no_info: (void) printf(dgettext(TEXT_DOMAIN, "Destroy and re-create the pool from\n\ta backup source.\n")); } /* * zpool_import() is a contracted interface. Should be kept the same * if possible. * * Applications should use zpool_import_props() to import a pool with * new properties value to be set. */ int zpool_import(libzfs_handle_t *hdl, nvlist_t *config, const char *newname, char *altroot) { nvlist_t *props = NULL; int ret; if (altroot != NULL) { if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0) { return (zfs_error_fmt(hdl, EZFS_NOMEM, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); } if (nvlist_add_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), altroot) != 0 || nvlist_add_string(props, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE), "none") != 0) { nvlist_free(props); return (zfs_error_fmt(hdl, EZFS_NOMEM, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); } } ret = zpool_import_props(hdl, config, newname, props, ZFS_IMPORT_NORMAL); nvlist_free(props); return (ret); } static void print_vdev_tree(libzfs_handle_t *hdl, const char *name, nvlist_t *nv, int indent) { nvlist_t **child; uint_t c, children; char *vname; uint64_t is_log = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log); if (name != NULL) (void) printf("\t%*s%s%s\n", indent, "", name, is_log ? " [log]" : ""); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; for (c = 0; c < children; c++) { vname = zpool_vdev_name(hdl, NULL, child[c], VDEV_NAME_TYPE_ID); print_vdev_tree(hdl, vname, child[c], indent + 2); free(vname); } } void zpool_print_unsup_feat(nvlist_t *config) { nvlist_t *nvinfo, *unsup_feat; nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO); unsup_feat = fnvlist_lookup_nvlist(nvinfo, ZPOOL_CONFIG_UNSUP_FEAT); for (nvpair_t *nvp = nvlist_next_nvpair(unsup_feat, NULL); nvp != NULL; nvp = nvlist_next_nvpair(unsup_feat, nvp)) { const char *desc = fnvpair_value_string(nvp); if (strlen(desc) > 0) (void) printf("\t%s (%s)\n", nvpair_name(nvp), desc); else (void) printf("\t%s\n", nvpair_name(nvp)); } } /* * Import the given pool using the known configuration and a list of * properties to be set. The configuration should have come from * zpool_find_import(). The 'newname' parameters control whether the pool * is imported with a different name. */ int zpool_import_props(libzfs_handle_t *hdl, nvlist_t *config, const char *newname, nvlist_t *props, int flags) { zfs_cmd_t zc = {"\0"}; zpool_load_policy_t policy; nvlist_t *nv = NULL; nvlist_t *nvinfo = NULL; nvlist_t *missing = NULL; const char *thename; const char *origname; int ret; int error = 0; char errbuf[ERRBUFLEN]; origname = fnvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME); (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot import pool '%s'"), origname); if (newname != NULL) { if (!zpool_name_valid(hdl, B_FALSE, newname)) return (zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); thename = newname; } else { thename = origname; } if (props != NULL) { uint64_t version; prop_flags_t flags = { .create = B_FALSE, .import = B_TRUE }; version = fnvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION); if ((props = zpool_valid_proplist(hdl, origname, props, version, flags, errbuf)) == NULL) return (-1); zcmd_write_src_nvlist(hdl, &zc, props); nvlist_free(props); } (void) strlcpy(zc.zc_name, thename, sizeof (zc.zc_name)); zc.zc_guid = fnvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID); zcmd_write_conf_nvlist(hdl, &zc, config); zcmd_alloc_dst_nvlist(hdl, &zc, zc.zc_nvlist_conf_size * 2); zc.zc_cookie = flags; while ((ret = zfs_ioctl(hdl, ZFS_IOC_POOL_IMPORT, &zc)) != 0 && errno == ENOMEM) zcmd_expand_dst_nvlist(hdl, &zc); if (ret != 0) error = errno; (void) zcmd_read_dst_nvlist(hdl, &zc, &nv); zcmd_free_nvlists(&zc); zpool_get_load_policy(config, &policy); if (error) { char desc[1024]; char aux[256]; /* * Dry-run failed, but we print out what success * looks like if we found a best txg */ if (policy.zlp_rewind & ZPOOL_TRY_REWIND) { zpool_rewind_exclaim(hdl, newname ? origname : thename, B_TRUE, nv); nvlist_free(nv); return (-1); } if (newname == NULL) (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s'"), thename); else (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s' as '%s'"), origname, thename); switch (error) { case ENOTSUP: if (nv != NULL && nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_LOAD_INFO, &nvinfo) == 0 && nvlist_exists(nvinfo, ZPOOL_CONFIG_UNSUP_FEAT)) { (void) printf(dgettext(TEXT_DOMAIN, "This " "pool uses the following feature(s) not " "supported by this system:\n")); zpool_print_unsup_feat(nv); if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY)) { (void) printf(dgettext(TEXT_DOMAIN, "All unsupported features are only " "required for writing to the pool." "\nThe pool can be imported using " "'-o readonly=on'.\n")); } } /* * Unsupported version. */ (void) zfs_error(hdl, EZFS_BADVERSION, desc); break; case EREMOTEIO: if (nv != NULL && nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_LOAD_INFO, &nvinfo) == 0) { const char *hostname = ""; uint64_t hostid = 0; mmp_state_t mmp_state; mmp_state = fnvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_STATE); if (nvlist_exists(nvinfo, ZPOOL_CONFIG_MMP_HOSTNAME)) hostname = fnvlist_lookup_string(nvinfo, ZPOOL_CONFIG_MMP_HOSTNAME); if (nvlist_exists(nvinfo, ZPOOL_CONFIG_MMP_HOSTID)) hostid = fnvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_HOSTID); if (mmp_state == MMP_STATE_ACTIVE) { (void) snprintf(aux, sizeof (aux), dgettext(TEXT_DOMAIN, "pool is imp" "orted on host '%s' (hostid=%lx).\n" "Export the pool on the other " "system, then run 'zpool import'."), hostname, (unsigned long) hostid); } else if (mmp_state == MMP_STATE_NO_HOSTID) { (void) snprintf(aux, sizeof (aux), dgettext(TEXT_DOMAIN, "pool has " "the multihost property on and " "the\nsystem's hostid is not set. " "Set a unique system hostid with " "the zgenhostid(8) command.\n")); } (void) zfs_error_aux(hdl, "%s", aux); } (void) zfs_error(hdl, EZFS_ACTIVE_POOL, desc); break; case EINVAL: (void) zfs_error(hdl, EZFS_INVALCONFIG, desc); break; case EROFS: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is read only")); (void) zfs_error(hdl, EZFS_BADDEV, desc); break; case ENXIO: if (nv && nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_LOAD_INFO, &nvinfo) == 0 && nvlist_lookup_nvlist(nvinfo, ZPOOL_CONFIG_MISSING_DEVICES, &missing) == 0) { (void) printf(dgettext(TEXT_DOMAIN, "The devices below are missing or " "corrupted, use '-m' to import the pool " "anyway:\n")); print_vdev_tree(hdl, NULL, missing, 2); (void) printf("\n"); } (void) zpool_standard_error(hdl, error, desc); break; case EEXIST: (void) zpool_standard_error(hdl, error, desc); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices are already in use\n")); (void) zfs_error(hdl, EZFS_BADDEV, desc); break; case ENAMETOOLONG: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new name of at least one dataset is longer than " "the maximum allowable length")); (void) zfs_error(hdl, EZFS_NAMETOOLONG, desc); break; default: (void) zpool_standard_error(hdl, error, desc); zpool_explain_recover(hdl, newname ? origname : thename, -error, nv); break; } nvlist_free(nv); ret = -1; } else { zpool_handle_t *zhp; /* * This should never fail, but play it safe anyway. */ if (zpool_open_silent(hdl, thename, &zhp) != 0) ret = -1; else if (zhp != NULL) zpool_close(zhp); if (policy.zlp_rewind & (ZPOOL_DO_REWIND | ZPOOL_TRY_REWIND)) { zpool_rewind_exclaim(hdl, newname ? origname : thename, ((policy.zlp_rewind & ZPOOL_TRY_REWIND) != 0), nv); } nvlist_free(nv); } return (ret); } /* * Translate vdev names to guids. If a vdev_path is determined to be * unsuitable then a vd_errlist is allocated and the vdev path and errno * are added to it. */ static int zpool_translate_vdev_guids(zpool_handle_t *zhp, nvlist_t *vds, nvlist_t *vdev_guids, nvlist_t *guids_to_paths, nvlist_t **vd_errlist) { nvlist_t *errlist = NULL; int error = 0; for (nvpair_t *elem = nvlist_next_nvpair(vds, NULL); elem != NULL; elem = nvlist_next_nvpair(vds, elem)) { boolean_t spare, cache; const char *vd_path = nvpair_name(elem); nvlist_t *tgt = zpool_find_vdev(zhp, vd_path, &spare, &cache, NULL); if ((tgt == NULL) || cache || spare) { if (errlist == NULL) { errlist = fnvlist_alloc(); error = EINVAL; } uint64_t err = (tgt == NULL) ? EZFS_NODEVICE : (spare ? EZFS_ISSPARE : EZFS_ISL2CACHE); fnvlist_add_int64(errlist, vd_path, err); continue; } uint64_t guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); fnvlist_add_uint64(vdev_guids, vd_path, guid); char msg[MAXNAMELEN]; (void) snprintf(msg, sizeof (msg), "%llu", (u_longlong_t)guid); fnvlist_add_string(guids_to_paths, msg, vd_path); } if (error != 0) { verify(errlist != NULL); if (vd_errlist != NULL) *vd_errlist = errlist; else fnvlist_free(errlist); } return (error); } static int xlate_init_err(int err) { switch (err) { case ENODEV: return (EZFS_NODEVICE); case EINVAL: case EROFS: return (EZFS_BADDEV); case EBUSY: return (EZFS_INITIALIZING); case ESRCH: return (EZFS_NO_INITIALIZE); } return (err); } /* * Begin, suspend, cancel, or uninit (clear) the initialization (initializing * of all free blocks) for the given vdevs in the given pool. */ static int zpool_initialize_impl(zpool_handle_t *zhp, pool_initialize_func_t cmd_type, nvlist_t *vds, boolean_t wait) { int err; nvlist_t *vdev_guids = fnvlist_alloc(); nvlist_t *guids_to_paths = fnvlist_alloc(); nvlist_t *vd_errlist = NULL; nvlist_t *errlist; nvpair_t *elem; err = zpool_translate_vdev_guids(zhp, vds, vdev_guids, guids_to_paths, &vd_errlist); if (err != 0) { verify(vd_errlist != NULL); goto list_errors; } err = lzc_initialize(zhp->zpool_name, cmd_type, vdev_guids, &errlist); if (err != 0) { if (errlist != NULL && nvlist_lookup_nvlist(errlist, ZPOOL_INITIALIZE_VDEVS, &vd_errlist) == 0) { goto list_errors; } if (err == EINVAL && cmd_type == POOL_INITIALIZE_UNINIT) { zfs_error_aux(zhp->zpool_hdl, dgettext(TEXT_DOMAIN, "uninitialize is not supported by kernel")); } (void) zpool_standard_error(zhp->zpool_hdl, err, dgettext(TEXT_DOMAIN, "operation failed")); goto out; } if (wait) { for (elem = nvlist_next_nvpair(vdev_guids, NULL); elem != NULL; elem = nvlist_next_nvpair(vdev_guids, elem)) { uint64_t guid = fnvpair_value_uint64(elem); err = lzc_wait_tag(zhp->zpool_name, ZPOOL_WAIT_INITIALIZE, guid, NULL); if (err != 0) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, err, dgettext(TEXT_DOMAIN, "error " "waiting for '%s' to initialize"), nvpair_name(elem)); goto out; } } } goto out; list_errors: for (elem = nvlist_next_nvpair(vd_errlist, NULL); elem != NULL; elem = nvlist_next_nvpair(vd_errlist, elem)) { int64_t vd_error = xlate_init_err(fnvpair_value_int64(elem)); const char *path; if (nvlist_lookup_string(guids_to_paths, nvpair_name(elem), &path) != 0) path = nvpair_name(elem); (void) zfs_error_fmt(zhp->zpool_hdl, vd_error, "cannot initialize '%s'", path); } out: fnvlist_free(vdev_guids); fnvlist_free(guids_to_paths); if (vd_errlist != NULL) fnvlist_free(vd_errlist); return (err == 0 ? 0 : -1); } int zpool_initialize(zpool_handle_t *zhp, pool_initialize_func_t cmd_type, nvlist_t *vds) { return (zpool_initialize_impl(zhp, cmd_type, vds, B_FALSE)); } int zpool_initialize_wait(zpool_handle_t *zhp, pool_initialize_func_t cmd_type, nvlist_t *vds) { return (zpool_initialize_impl(zhp, cmd_type, vds, B_TRUE)); } static int xlate_trim_err(int err) { switch (err) { case ENODEV: return (EZFS_NODEVICE); case EINVAL: case EROFS: return (EZFS_BADDEV); case EBUSY: return (EZFS_TRIMMING); case ESRCH: return (EZFS_NO_TRIM); case EOPNOTSUPP: return (EZFS_TRIM_NOTSUP); } return (err); } static int zpool_trim_wait(zpool_handle_t *zhp, nvlist_t *vdev_guids) { int err; nvpair_t *elem; for (elem = nvlist_next_nvpair(vdev_guids, NULL); elem != NULL; elem = nvlist_next_nvpair(vdev_guids, elem)) { uint64_t guid = fnvpair_value_uint64(elem); err = lzc_wait_tag(zhp->zpool_name, ZPOOL_WAIT_TRIM, guid, NULL); if (err != 0) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, err, dgettext(TEXT_DOMAIN, "error " "waiting to trim '%s'"), nvpair_name(elem)); return (err); } } return (0); } /* * Check errlist and report any errors, omitting ones which should be * suppressed. Returns B_TRUE if any errors were reported. */ static boolean_t check_trim_errs(zpool_handle_t *zhp, trimflags_t *trim_flags, nvlist_t *guids_to_paths, nvlist_t *vds, nvlist_t *errlist) { nvpair_t *elem; boolean_t reported_errs = B_FALSE; int num_vds = 0; int num_suppressed_errs = 0; for (elem = nvlist_next_nvpair(vds, NULL); elem != NULL; elem = nvlist_next_nvpair(vds, elem)) { num_vds++; } for (elem = nvlist_next_nvpair(errlist, NULL); elem != NULL; elem = nvlist_next_nvpair(errlist, elem)) { int64_t vd_error = xlate_trim_err(fnvpair_value_int64(elem)); const char *path; /* * If only the pool was specified, and it was not a secure * trim then suppress warnings for individual vdevs which * do not support trimming. */ if (vd_error == EZFS_TRIM_NOTSUP && trim_flags->fullpool && !trim_flags->secure) { num_suppressed_errs++; continue; } reported_errs = B_TRUE; if (nvlist_lookup_string(guids_to_paths, nvpair_name(elem), &path) != 0) path = nvpair_name(elem); (void) zfs_error_fmt(zhp->zpool_hdl, vd_error, "cannot trim '%s'", path); } if (num_suppressed_errs == num_vds) { (void) zfs_error_aux(zhp->zpool_hdl, dgettext(TEXT_DOMAIN, "no devices in pool support trim operations")); (void) (zfs_error(zhp->zpool_hdl, EZFS_TRIM_NOTSUP, dgettext(TEXT_DOMAIN, "cannot trim"))); reported_errs = B_TRUE; } return (reported_errs); } /* * Begin, suspend, or cancel the TRIM (discarding of all free blocks) for * the given vdevs in the given pool. */ int zpool_trim(zpool_handle_t *zhp, pool_trim_func_t cmd_type, nvlist_t *vds, trimflags_t *trim_flags) { int err; int retval = 0; nvlist_t *vdev_guids = fnvlist_alloc(); nvlist_t *guids_to_paths = fnvlist_alloc(); nvlist_t *errlist = NULL; err = zpool_translate_vdev_guids(zhp, vds, vdev_guids, guids_to_paths, &errlist); if (err != 0) { check_trim_errs(zhp, trim_flags, guids_to_paths, vds, errlist); retval = -1; goto out; } err = lzc_trim(zhp->zpool_name, cmd_type, trim_flags->rate, trim_flags->secure, vdev_guids, &errlist); if (err != 0) { nvlist_t *vd_errlist; if (errlist != NULL && nvlist_lookup_nvlist(errlist, ZPOOL_TRIM_VDEVS, &vd_errlist) == 0) { if (check_trim_errs(zhp, trim_flags, guids_to_paths, vds, vd_errlist)) { retval = -1; goto out; } } else { char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "operation failed")); zpool_standard_error(zhp->zpool_hdl, err, errbuf); retval = -1; goto out; } } if (trim_flags->wait) retval = zpool_trim_wait(zhp, vdev_guids); out: if (errlist != NULL) fnvlist_free(errlist); fnvlist_free(vdev_guids); fnvlist_free(guids_to_paths); return (retval); } /* * Scan the pool. */ int zpool_scan(zpool_handle_t *zhp, pool_scan_func_t func, pool_scrub_cmd_t cmd) { char errbuf[ERRBUFLEN]; int err; libzfs_handle_t *hdl = zhp->zpool_hdl; nvlist_t *args = fnvlist_alloc(); fnvlist_add_uint64(args, "scan_type", (uint64_t)func); fnvlist_add_uint64(args, "scan_command", (uint64_t)cmd); err = lzc_scrub(ZFS_IOC_POOL_SCRUB, zhp->zpool_name, args, NULL); fnvlist_free(args); if (err == 0) { return (0); } else if (err == ZFS_ERR_IOC_CMD_UNAVAIL) { zfs_cmd_t zc = {"\0"}; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = func; zc.zc_flags = cmd; if (zfs_ioctl(hdl, ZFS_IOC_POOL_SCAN, &zc) == 0) return (0); } /* * An ECANCELED on a scrub means one of the following: * 1. we resumed a paused scrub. * 2. we resumed a paused error scrub. * 3. Error scrub is not run because of no error log. */ if (err == ECANCELED && (func == POOL_SCAN_SCRUB || func == POOL_SCAN_ERRORSCRUB) && cmd == POOL_SCRUB_NORMAL) return (0); /* * The following cases have been handled here: * 1. Paused a scrub/error scrub if there is none in progress. */ if (err == ENOENT && func != POOL_SCAN_NONE && cmd == POOL_SCRUB_PAUSE) { return (0); } ASSERT3U(func, >=, POOL_SCAN_NONE); ASSERT3U(func, <, POOL_SCAN_FUNCS); if (func == POOL_SCAN_SCRUB || func == POOL_SCAN_ERRORSCRUB) { if (cmd == POOL_SCRUB_PAUSE) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot pause scrubbing %s"), zhp->zpool_name); } else { assert(cmd == POOL_SCRUB_NORMAL); (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot scrub %s"), zhp->zpool_name); } } else if (func == POOL_SCAN_RESILVER) { assert(cmd == POOL_SCRUB_NORMAL); (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot restart resilver on %s"), zhp->zpool_name); } else if (func == POOL_SCAN_NONE) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot cancel scrubbing %s"), zhp->zpool_name); } else { assert(!"unexpected result"); } /* * With EBUSY, five cases are possible: * * Current state Requested * 1. Normal Scrub Running Normal Scrub or Error Scrub * 2. Normal Scrub Paused Error Scrub * 3. Normal Scrub Paused Pause Normal Scrub * 4. Error Scrub Running Normal Scrub or Error Scrub * 5. Error Scrub Paused Pause Error Scrub * 6. Resilvering Anything else */ if (err == EBUSY) { nvlist_t *nvroot; pool_scan_stat_t *ps = NULL; uint_t psc; nvroot = fnvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE); (void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS, (uint64_t **)&ps, &psc); if (ps && ps->pss_func == POOL_SCAN_SCRUB && ps->pss_state == DSS_SCANNING) { if (ps->pss_pass_scrub_pause == 0) { /* handles case 1 */ assert(cmd == POOL_SCRUB_NORMAL); return (zfs_error(hdl, EZFS_SCRUBBING, errbuf)); } else { if (func == POOL_SCAN_ERRORSCRUB) { /* handles case 2 */ ASSERT3U(cmd, ==, POOL_SCRUB_NORMAL); return (zfs_error(hdl, EZFS_SCRUB_PAUSED_TO_CANCEL, errbuf)); } else { /* handles case 3 */ ASSERT3U(func, ==, POOL_SCAN_SCRUB); ASSERT3U(cmd, ==, POOL_SCRUB_PAUSE); return (zfs_error(hdl, EZFS_SCRUB_PAUSED, errbuf)); } } } else if (ps && ps->pss_error_scrub_func == POOL_SCAN_ERRORSCRUB && ps->pss_error_scrub_state == DSS_ERRORSCRUBBING) { if (ps->pss_pass_error_scrub_pause == 0) { /* handles case 4 */ ASSERT3U(cmd, ==, POOL_SCRUB_NORMAL); return (zfs_error(hdl, EZFS_ERRORSCRUBBING, errbuf)); } else { /* handles case 5 */ ASSERT3U(func, ==, POOL_SCAN_ERRORSCRUB); ASSERT3U(cmd, ==, POOL_SCRUB_PAUSE); return (zfs_error(hdl, EZFS_ERRORSCRUB_PAUSED, errbuf)); } } else { /* handles case 6 */ return (zfs_error(hdl, EZFS_RESILVERING, errbuf)); } } else if (err == ENOENT) { return (zfs_error(hdl, EZFS_NO_SCRUB, errbuf)); } else if (err == ENOTSUP && func == POOL_SCAN_RESILVER) { return (zfs_error(hdl, EZFS_NO_RESILVER_DEFER, errbuf)); } else { return (zpool_standard_error(hdl, err, errbuf)); } } /* * Find a vdev that matches the search criteria specified. We use the * the nvpair name to determine how we should look for the device. * 'avail_spare' is set to TRUE if the provided guid refers to an AVAIL * spare; but FALSE if its an INUSE spare. */ static nvlist_t * vdev_to_nvlist_iter(nvlist_t *nv, nvlist_t *search, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { uint_t c, children; nvlist_t **child; nvlist_t *ret; uint64_t is_log; const char *srchkey; nvpair_t *pair = nvlist_next_nvpair(search, NULL); /* Nothing to look for */ if (search == NULL || pair == NULL) return (NULL); /* Obtain the key we will use to search */ srchkey = nvpair_name(pair); switch (nvpair_type(pair)) { case DATA_TYPE_UINT64: if (strcmp(srchkey, ZPOOL_CONFIG_GUID) == 0) { uint64_t srchval = fnvpair_value_uint64(pair); uint64_t theguid = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID); if (theguid == srchval) return (nv); } break; case DATA_TYPE_STRING: { const char *srchval, *val; srchval = fnvpair_value_string(pair); if (nvlist_lookup_string(nv, srchkey, &val) != 0) break; /* * Search for the requested value. Special cases: * * - ZPOOL_CONFIG_PATH for whole disk entries. These end in * "-part1", or "p1". The suffix is hidden from the user, * but included in the string, so this matches around it. * - ZPOOL_CONFIG_PATH for short names zfs_strcmp_shortname() * is used to check all possible expanded paths. * - looking for a top-level vdev name (i.e. ZPOOL_CONFIG_TYPE). * * Otherwise, all other searches are simple string compares. */ if (strcmp(srchkey, ZPOOL_CONFIG_PATH) == 0) { uint64_t wholedisk = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); if (zfs_strcmp_pathname(srchval, val, wholedisk) == 0) return (nv); } else if (strcmp(srchkey, ZPOOL_CONFIG_TYPE) == 0) { char *type, *idx, *end, *p; uint64_t id, vdev_id; /* * Determine our vdev type, keeping in mind * that the srchval is composed of a type and * vdev id pair (i.e. mirror-4). */ if ((type = strdup(srchval)) == NULL) return (NULL); if ((p = strrchr(type, '-')) == NULL) { free(type); break; } idx = p + 1; *p = '\0'; /* * If the types don't match then keep looking. */ if (strncmp(val, type, strlen(val)) != 0) { free(type); break; } verify(zpool_vdev_is_interior(type)); id = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID); errno = 0; vdev_id = strtoull(idx, &end, 10); /* * If we are looking for a raidz and a parity is * specified, make sure it matches. */ int rzlen = strlen(VDEV_TYPE_RAIDZ); assert(rzlen == strlen(VDEV_TYPE_DRAID)); int typlen = strlen(type); if ((strncmp(type, VDEV_TYPE_RAIDZ, rzlen) == 0 || strncmp(type, VDEV_TYPE_DRAID, rzlen) == 0) && typlen != rzlen) { uint64_t vdev_parity; int parity = *(type + rzlen) - '0'; if (parity <= 0 || parity > 3 || (typlen - rzlen) != 1) { /* * Nonsense parity specified, can * never match */ free(type); return (NULL); } vdev_parity = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY); if ((int)vdev_parity != parity) { free(type); break; } } free(type); if (errno != 0) return (NULL); /* * Now verify that we have the correct vdev id. */ if (vdev_id == id) return (nv); } /* * Common case */ if (strcmp(srchval, val) == 0) return (nv); break; } default: break; } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return (NULL); for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { /* * The 'is_log' value is only set for the toplevel * vdev, not the leaf vdevs. So we always lookup the * log device from the root of the vdev tree (where * 'log' is non-NULL). */ if (log != NULL && nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log) == 0 && is_log) { *log = B_TRUE; } return (ret); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { *avail_spare = B_TRUE; return (ret); } } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { *l2cache = B_TRUE; return (ret); } } } return (NULL); } /* * Given a physical path or guid, find the associated vdev. */ nvlist_t * zpool_find_vdev_by_physpath(zpool_handle_t *zhp, const char *ppath, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { nvlist_t *search, *nvroot, *ret; uint64_t guid; char *end; search = fnvlist_alloc(); guid = strtoull(ppath, &end, 0); if (guid != 0 && *end == '\0') { fnvlist_add_uint64(search, ZPOOL_CONFIG_GUID, guid); } else { fnvlist_add_string(search, ZPOOL_CONFIG_PHYS_PATH, ppath); } nvroot = fnvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE); *avail_spare = B_FALSE; *l2cache = B_FALSE; if (log != NULL) *log = B_FALSE; ret = vdev_to_nvlist_iter(nvroot, search, avail_spare, l2cache, log); fnvlist_free(search); return (ret); } /* * Determine if we have an "interior" top-level vdev (i.e mirror/raidz). */ static boolean_t zpool_vdev_is_interior(const char *name) { if (strncmp(name, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0 || strncmp(name, VDEV_TYPE_SPARE, strlen(VDEV_TYPE_SPARE)) == 0 || strncmp(name, VDEV_TYPE_REPLACING, strlen(VDEV_TYPE_REPLACING)) == 0 || strncmp(name, VDEV_TYPE_ROOT, strlen(VDEV_TYPE_ROOT)) == 0 || strncmp(name, VDEV_TYPE_MIRROR, strlen(VDEV_TYPE_MIRROR)) == 0) return (B_TRUE); if (strncmp(name, VDEV_TYPE_DRAID, strlen(VDEV_TYPE_DRAID)) == 0 && !zpool_is_draid_spare(name)) return (B_TRUE); return (B_FALSE); } /* * Lookup the nvlist for a given vdev. */ nvlist_t * zpool_find_vdev(zpool_handle_t *zhp, const char *path, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { char *end; nvlist_t *nvroot, *search, *ret; uint64_t guid; boolean_t __avail_spare, __l2cache, __log; search = fnvlist_alloc(); guid = strtoull(path, &end, 0); if (guid != 0 && *end == '\0') { fnvlist_add_uint64(search, ZPOOL_CONFIG_GUID, guid); } else if (zpool_vdev_is_interior(path)) { fnvlist_add_string(search, ZPOOL_CONFIG_TYPE, path); } else { fnvlist_add_string(search, ZPOOL_CONFIG_PATH, path); } nvroot = fnvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE); /* * User can pass NULL for avail_spare, l2cache, and log, but * we still need to provide variables to vdev_to_nvlist_iter(), so * just point them to junk variables here. */ if (!avail_spare) avail_spare = &__avail_spare; if (!l2cache) l2cache = &__l2cache; if (!log) log = &__log; *avail_spare = B_FALSE; *l2cache = B_FALSE; if (log != NULL) *log = B_FALSE; ret = vdev_to_nvlist_iter(nvroot, search, avail_spare, l2cache, log); fnvlist_free(search); return (ret); } /* * Convert a vdev path to a GUID. Returns GUID or 0 on error. * * If is_spare, is_l2cache, or is_log is non-NULL, then store within it * if the VDEV is a spare, l2cache, or log device. If they're NULL then * ignore them. */ static uint64_t zpool_vdev_path_to_guid_impl(zpool_handle_t *zhp, const char *path, boolean_t *is_spare, boolean_t *is_l2cache, boolean_t *is_log) { boolean_t spare = B_FALSE, l2cache = B_FALSE, log = B_FALSE; nvlist_t *tgt; if ((tgt = zpool_find_vdev(zhp, path, &spare, &l2cache, &log)) == NULL) return (0); if (is_spare != NULL) *is_spare = spare; if (is_l2cache != NULL) *is_l2cache = l2cache; if (is_log != NULL) *is_log = log; return (fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID)); } /* Convert a vdev path to a GUID. Returns GUID or 0 on error. */ uint64_t zpool_vdev_path_to_guid(zpool_handle_t *zhp, const char *path) { return (zpool_vdev_path_to_guid_impl(zhp, path, NULL, NULL, NULL)); } /* * Bring the specified vdev online. The 'flags' parameter is a set of the * ZFS_ONLINE_* flags. */ int zpool_vdev_online(zpool_handle_t *zhp, const char *path, int flags, vdev_state_t *newstate) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; libzfs_handle_t *hdl = zhp->zpool_hdl; if (flags & ZFS_ONLINE_EXPAND) { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot expand %s"), path); } else { (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot online %s"), path); } (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, &islog)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); if (!(flags & ZFS_ONLINE_SPARE) && avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, errbuf)); #ifndef __FreeBSD__ const char *pathname; if ((flags & ZFS_ONLINE_EXPAND || zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOEXPAND, NULL)) && nvlist_lookup_string(tgt, ZPOOL_CONFIG_PATH, &pathname) == 0) { uint64_t wholedisk = 0; (void) nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); /* * XXX - L2ARC 1.0 devices can't support expansion. */ if (l2cache) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot expand cache devices")); return (zfs_error(hdl, EZFS_VDEVNOTSUP, errbuf)); } if (wholedisk) { const char *fullpath = path; char buf[MAXPATHLEN]; int error; if (path[0] != '/') { error = zfs_resolve_shortname(path, buf, sizeof (buf)); if (error != 0) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); fullpath = buf; } error = zpool_relabel_disk(hdl, fullpath, errbuf); if (error != 0) return (error); } } #endif zc.zc_cookie = VDEV_STATE_ONLINE; zc.zc_obj = flags; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SET_STATE, &zc) != 0) { if (errno == EINVAL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "was split " "from this pool into a new one. Use '%s' " "instead"), "zpool detach"); return (zfs_error(hdl, EZFS_POSTSPLIT_ONLINE, errbuf)); } return (zpool_standard_error(hdl, errno, errbuf)); } *newstate = zc.zc_cookie; return (0); } /* * Take the specified vdev offline */ int zpool_vdev_offline(zpool_handle_t *zhp, const char *path, boolean_t istmp) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot offline %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, errbuf)); zc.zc_cookie = VDEV_STATE_OFFLINE; zc.zc_obj = istmp ? ZFS_OFFLINE_TEMPORARY : 0; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); switch (errno) { case EBUSY: /* * There are no other replicas of this device. */ return (zfs_error(hdl, EZFS_NOREPLICAS, errbuf)); case EEXIST: /* * The log device has unplayed logs */ return (zfs_error(hdl, EZFS_UNPLAYED_LOGS, errbuf)); default: return (zpool_standard_error(hdl, errno, errbuf)); } } /* * Remove the specified vdev asynchronously from the configuration, so * that it may come ONLINE if reinserted. This is called from zed on * Udev remove event. * Note: We also have a similar function zpool_vdev_remove() that * removes the vdev from the pool. */ int zpool_vdev_remove_wanted(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot remove %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); zc.zc_cookie = VDEV_STATE_REMOVED; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, errbuf)); } /* * Mark the given vdev faulted. */ int zpool_vdev_fault(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot fault %llu"), (u_longlong_t)guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = VDEV_STATE_FAULTED; zc.zc_obj = aux; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); switch (errno) { case EBUSY: /* * There are no other replicas of this device. */ return (zfs_error(hdl, EZFS_NOREPLICAS, errbuf)); default: return (zpool_standard_error(hdl, errno, errbuf)); } } /* * Generic set vdev state function */ static int zpool_vdev_set_state(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux, vdev_state_t state) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot set %s %llu"), zpool_state_to_name(state, aux), (u_longlong_t)guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = state; zc.zc_obj = aux; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, errbuf)); } /* * Mark the given vdev degraded. */ int zpool_vdev_degrade(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux) { return (zpool_vdev_set_state(zhp, guid, aux, VDEV_STATE_DEGRADED)); } /* * Mark the given vdev as in a removed state (as if the device does not exist). * * This is different than zpool_vdev_remove() which does a removal of a device * from the pool (but the device does exist). */ int zpool_vdev_set_removed_state(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux) { return (zpool_vdev_set_state(zhp, guid, aux, VDEV_STATE_REMOVED)); } /* * Returns TRUE if the given nvlist is a vdev that was originally swapped in as * a hot spare. */ static boolean_t is_replacing_spare(nvlist_t *search, nvlist_t *tgt, int which) { nvlist_t **child; uint_t c, children; if (nvlist_lookup_nvlist_array(search, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { const char *type = fnvlist_lookup_string(search, ZPOOL_CONFIG_TYPE); if ((strcmp(type, VDEV_TYPE_SPARE) == 0 || strcmp(type, VDEV_TYPE_DRAID_SPARE) == 0) && children == 2 && child[which] == tgt) return (B_TRUE); for (c = 0; c < children; c++) if (is_replacing_spare(child[c], tgt, which)) return (B_TRUE); } return (B_FALSE); } /* * Attach new_disk (fully described by nvroot) to old_disk. * If 'replacing' is specified, the new disk will replace the old one. */ int zpool_vdev_attach(zpool_handle_t *zhp, const char *old_disk, const char *new_disk, nvlist_t *nvroot, int replacing, boolean_t rebuild) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; int ret; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; uint64_t val; char *newname; const char *type; nvlist_t **child; uint_t children; nvlist_t *config_root; libzfs_handle_t *hdl = zhp->zpool_hdl; if (replacing) (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot replace %s with %s"), old_disk, new_disk); else (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot attach %s to %s"), new_disk, old_disk); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, old_disk, &avail_spare, &l2cache, &islog)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, errbuf)); if (l2cache) return (zfs_error(hdl, EZFS_ISL2CACHE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); zc.zc_cookie = replacing; zc.zc_simple = rebuild; if (rebuild && zfeature_lookup_guid("org.openzfs:device_rebuild", NULL) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs module doesn't support device rebuilds")); return (zfs_error(hdl, EZFS_POOL_NOTSUP, errbuf)); } type = fnvlist_lookup_string(tgt, ZPOOL_CONFIG_TYPE); if (strcmp(type, VDEV_TYPE_RAIDZ) == 0 && zfeature_lookup_guid("org.openzfs:raidz_expansion", NULL) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs module doesn't support raidz expansion")); return (zfs_error(hdl, EZFS_POOL_NOTSUP, errbuf)); } if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0 || children != 1) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); return (zfs_error(hdl, EZFS_INVALCONFIG, errbuf)); } config_root = fnvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE); if ((newname = zpool_vdev_name(NULL, NULL, child[0], 0)) == NULL) return (-1); /* * If the target is a hot spare that has been swapped in, we can only * replace it with another hot spare. */ if (replacing && nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_IS_SPARE, &val) == 0 && (zpool_find_vdev(zhp, newname, &avail_spare, &l2cache, NULL) == NULL || !avail_spare) && is_replacing_spare(config_root, tgt, 1)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only be replaced by another hot spare")); free(newname); return (zfs_error(hdl, EZFS_BADTARGET, errbuf)); } free(newname); zcmd_write_conf_nvlist(hdl, &zc, nvroot); ret = zfs_ioctl(hdl, ZFS_IOC_VDEV_ATTACH, &zc); zcmd_free_nvlists(&zc); if (ret == 0) return (0); switch (errno) { case ENOTSUP: /* * Can't attach to or replace this type of vdev. */ if (replacing) { uint64_t version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if (islog) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot replace a log with a spare")); } else if (rebuild) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only mirror and dRAID vdevs support " "sequential reconstruction")); } else if (zpool_is_draid_spare(new_disk)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dRAID spares can only replace child " "devices in their parent's dRAID vdev")); } else if (version >= SPA_VERSION_MULTI_REPLACE) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "already in replacing/spare config; wait " "for completion or use 'zpool detach'")); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot replace a replacing device")); } } else if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "raidz_expansion feature must be enabled " "in order to attach a device to raidz")); } else { char status[64] = {0}; zpool_prop_get_feature(zhp, "feature@device_rebuild", status, 63); if (rebuild && strncmp(status, ZFS_FEATURE_DISABLED, 64) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device_rebuild feature must be enabled " "in order to use sequential " "reconstruction")); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only attach to mirrors and top-level " "disks")); } } (void) zfs_error(hdl, EZFS_BADTARGET, errbuf); break; case EINVAL: /* * The new device must be a single disk. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); (void) zfs_error(hdl, EZFS_INVALCONFIG, errbuf); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "%s is busy"), new_disk); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case EOVERFLOW: /* * The new device is too small. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is too small")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case EDOM: /* * The new device has a different optimal sector size. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device has a different optimal sector size; use the " "option '-o ashift=N' to override the optimal size")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; case ENAMETOOLONG: /* * The resulting top-level vdev spec won't fit in the label. */ (void) zfs_error(hdl, EZFS_DEVOVERFLOW, errbuf); break; case ENXIO: /* * The existing raidz vdev has offline children */ if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "raidz vdev has devices that are are offline or " "being replaced")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); break; } else { (void) zpool_standard_error(hdl, errno, errbuf); } break; case EADDRINUSE: /* * The boot reserved area is already being used (FreeBSD) */ if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the reserved boot area needed for the expansion " "is already being used by a boot loader")); (void) zfs_error(hdl, EZFS_BADDEV, errbuf); } else { (void) zpool_standard_error(hdl, errno, errbuf); } break; default: (void) zpool_standard_error(hdl, errno, errbuf); } return (-1); } /* * Detach the specified device. */ int zpool_vdev_detach(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot detach %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, errbuf)); if (l2cache) return (zfs_error(hdl, EZFS_ISL2CACHE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); if (zfs_ioctl(hdl, ZFS_IOC_VDEV_DETACH, &zc) == 0) return (0); switch (errno) { case ENOTSUP: /* * Can't detach from this type of vdev. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only " "applicable to mirror and replacing vdevs")); (void) zfs_error(hdl, EZFS_BADTARGET, errbuf); break; case EBUSY: /* * There are no other replicas of this device. */ (void) zfs_error(hdl, EZFS_NOREPLICAS, errbuf); break; default: (void) zpool_standard_error(hdl, errno, errbuf); } return (-1); } /* * Find a mirror vdev in the source nvlist. * * The mchild array contains a list of disks in one of the top-level mirrors * of the source pool. The schild array contains a list of disks that the * user specified on the command line. We loop over the mchild array to * see if any entry in the schild array matches. * * If a disk in the mchild array is found in the schild array, we return * the index of that entry. Otherwise we return -1. */ static int find_vdev_entry(zpool_handle_t *zhp, nvlist_t **mchild, uint_t mchildren, nvlist_t **schild, uint_t schildren) { uint_t mc; for (mc = 0; mc < mchildren; mc++) { uint_t sc; char *mpath = zpool_vdev_name(zhp->zpool_hdl, zhp, mchild[mc], 0); for (sc = 0; sc < schildren; sc++) { char *spath = zpool_vdev_name(zhp->zpool_hdl, zhp, schild[sc], 0); boolean_t result = (strcmp(mpath, spath) == 0); free(spath); if (result) { free(mpath); return (mc); } } free(mpath); } return (-1); } /* * Split a mirror pool. If newroot points to null, then a new nvlist * is generated and it is the responsibility of the caller to free it. */ int zpool_vdev_split(zpool_handle_t *zhp, char *newname, nvlist_t **newroot, nvlist_t *props, splitflags_t flags) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; const char *bias; nvlist_t *tree, *config, **child, **newchild, *newconfig = NULL; nvlist_t **varray = NULL, *zc_props = NULL; uint_t c, children, newchildren, lastlog = 0, vcount, found = 0; libzfs_handle_t *hdl = zhp->zpool_hdl; uint64_t vers, readonly = B_FALSE; boolean_t freelist = B_FALSE, memory_err = B_TRUE; int retval = 0; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "Unable to split %s"), zhp->zpool_name); if (!zpool_name_valid(hdl, B_FALSE, newname)) return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf)); if ((config = zpool_get_config(zhp, NULL)) == NULL) { (void) fprintf(stderr, gettext("Internal error: unable to " "retrieve pool configuration\n")); return (-1); } tree = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE); vers = fnvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION); if (props) { prop_flags_t flags = { .create = B_FALSE, .import = B_TRUE }; if ((zc_props = zpool_valid_proplist(hdl, zhp->zpool_name, props, vers, flags, errbuf)) == NULL) return (-1); (void) nvlist_lookup_uint64(zc_props, zpool_prop_to_name(ZPOOL_PROP_READONLY), &readonly); if (readonly) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property %s can only be set at import time"), zpool_prop_to_name(ZPOOL_PROP_READONLY)); return (-1); } } if (nvlist_lookup_nvlist_array(tree, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Source pool is missing vdev tree")); nvlist_free(zc_props); return (-1); } varray = zfs_alloc(hdl, children * sizeof (nvlist_t *)); vcount = 0; if (*newroot == NULL || nvlist_lookup_nvlist_array(*newroot, ZPOOL_CONFIG_CHILDREN, &newchild, &newchildren) != 0) newchildren = 0; for (c = 0; c < children; c++) { uint64_t is_log = B_FALSE, is_hole = B_FALSE; boolean_t is_special = B_FALSE, is_dedup = B_FALSE; const char *type; nvlist_t **mchild, *vdev; uint_t mchildren; int entry; /* * Unlike cache & spares, slogs are stored in the * ZPOOL_CONFIG_CHILDREN array. We filter them out here. */ (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log); (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &is_hole); if (is_log || is_hole) { /* * Create a hole vdev and put it in the config. */ if (nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) != 0) goto out; if (nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, VDEV_TYPE_HOLE) != 0) goto out; if (nvlist_add_uint64(vdev, ZPOOL_CONFIG_IS_HOLE, 1) != 0) goto out; if (lastlog == 0) lastlog = vcount; varray[vcount++] = vdev; continue; } lastlog = 0; type = fnvlist_lookup_string(child[c], ZPOOL_CONFIG_TYPE); if (strcmp(type, VDEV_TYPE_INDIRECT) == 0) { vdev = child[c]; if (nvlist_dup(vdev, &varray[vcount++], 0) != 0) goto out; continue; } else if (strcmp(type, VDEV_TYPE_MIRROR) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Source pool must be composed only of mirrors\n")); retval = zfs_error(hdl, EZFS_INVALCONFIG, errbuf); goto out; } if (nvlist_lookup_string(child[c], ZPOOL_CONFIG_ALLOCATION_BIAS, &bias) == 0) { if (strcmp(bias, VDEV_ALLOC_BIAS_SPECIAL) == 0) is_special = B_TRUE; else if (strcmp(bias, VDEV_ALLOC_BIAS_DEDUP) == 0) is_dedup = B_TRUE; } verify(nvlist_lookup_nvlist_array(child[c], ZPOOL_CONFIG_CHILDREN, &mchild, &mchildren) == 0); /* find or add an entry for this top-level vdev */ if (newchildren > 0 && (entry = find_vdev_entry(zhp, mchild, mchildren, newchild, newchildren)) >= 0) { /* We found a disk that the user specified. */ vdev = mchild[entry]; ++found; } else { /* User didn't specify a disk for this vdev. */ vdev = mchild[mchildren - 1]; } if (nvlist_dup(vdev, &varray[vcount++], 0) != 0) goto out; if (flags.dryrun != 0) { if (is_dedup == B_TRUE) { if (nvlist_add_string(varray[vcount - 1], ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_DEDUP) != 0) goto out; } else if (is_special == B_TRUE) { if (nvlist_add_string(varray[vcount - 1], ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_SPECIAL) != 0) goto out; } } } /* did we find every disk the user specified? */ if (found != newchildren) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Device list must " "include at most one disk from each mirror")); retval = zfs_error(hdl, EZFS_INVALCONFIG, errbuf); goto out; } /* Prepare the nvlist for populating. */ if (*newroot == NULL) { if (nvlist_alloc(newroot, NV_UNIQUE_NAME, 0) != 0) goto out; freelist = B_TRUE; if (nvlist_add_string(*newroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0) goto out; } else { verify(nvlist_remove_all(*newroot, ZPOOL_CONFIG_CHILDREN) == 0); } /* Add all the children we found */ if (nvlist_add_nvlist_array(*newroot, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)varray, lastlog == 0 ? vcount : lastlog) != 0) goto out; /* * If we're just doing a dry run, exit now with success. */ if (flags.dryrun) { memory_err = B_FALSE; freelist = B_FALSE; goto out; } /* now build up the config list & call the ioctl */ if (nvlist_alloc(&newconfig, NV_UNIQUE_NAME, 0) != 0) goto out; if (nvlist_add_nvlist(newconfig, ZPOOL_CONFIG_VDEV_TREE, *newroot) != 0 || nvlist_add_string(newconfig, ZPOOL_CONFIG_POOL_NAME, newname) != 0 || nvlist_add_uint64(newconfig, ZPOOL_CONFIG_VERSION, vers) != 0) goto out; /* * The new pool is automatically part of the namespace unless we * explicitly export it. */ if (!flags.import) zc.zc_cookie = ZPOOL_EXPORT_AFTER_SPLIT; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); (void) strlcpy(zc.zc_string, newname, sizeof (zc.zc_string)); zcmd_write_conf_nvlist(hdl, &zc, newconfig); if (zc_props != NULL) zcmd_write_src_nvlist(hdl, &zc, zc_props); if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SPLIT, &zc) != 0) { retval = zpool_standard_error(hdl, errno, errbuf); goto out; } freelist = B_FALSE; memory_err = B_FALSE; out: if (varray != NULL) { int v; for (v = 0; v < vcount; v++) nvlist_free(varray[v]); free(varray); } zcmd_free_nvlists(&zc); nvlist_free(zc_props); nvlist_free(newconfig); if (freelist) { nvlist_free(*newroot); *newroot = NULL; } if (retval != 0) return (retval); if (memory_err) return (no_memory(hdl)); return (0); } /* * Remove the given device. */ int zpool_vdev_remove(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; libzfs_handle_t *hdl = zhp->zpool_hdl; uint64_t version; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot remove %s"), path); if (zpool_is_draid_spare(path)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dRAID spares cannot be removed")); return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); } (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, &islog)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if (islog && version < SPA_VERSION_HOLES) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to support log removal")); return (zfs_error(hdl, EZFS_BADVERSION, errbuf)); } zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); if (zfs_ioctl(hdl, ZFS_IOC_VDEV_REMOVE, &zc) == 0) return (0); switch (errno) { case EALREADY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "removal for this vdev is already in progress.")); (void) zfs_error(hdl, EZFS_BUSY, errbuf); break; case EINVAL: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid config; all top-level vdevs must " "have the same sector size and not be raidz.")); (void) zfs_error(hdl, EZFS_INVALCONFIG, errbuf); break; case EBUSY: if (islog) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Mount encrypted datasets to replay logs.")); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Pool busy; removal may already be in progress")); } (void) zfs_error(hdl, EZFS_BUSY, errbuf); break; case EACCES: if (islog) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Mount encrypted datasets to replay logs.")); (void) zfs_error(hdl, EZFS_BUSY, errbuf); } else { (void) zpool_standard_error(hdl, errno, errbuf); } break; default: (void) zpool_standard_error(hdl, errno, errbuf); } return (-1); } int zpool_vdev_remove_cancel(zpool_handle_t *zhp) { zfs_cmd_t zc = {{0}}; char errbuf[ERRBUFLEN]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot cancel removal")); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = 1; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_REMOVE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, errbuf)); } int zpool_vdev_indirect_size(zpool_handle_t *zhp, const char *path, uint64_t *sizep) { char errbuf[ERRBUFLEN]; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot determine indirect size of %s"), path); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, &islog)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); if (avail_spare || l2cache || islog) { *sizep = 0; return (0); } if (nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_INDIRECT_SIZE, sizep) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "indirect size not available")); return (zfs_error(hdl, EINVAL, errbuf)); } return (0); } /* * Clear the errors for the pool, or the particular device if specified. */ int zpool_clear(zpool_handle_t *zhp, const char *path, nvlist_t *rewindnvl) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; nvlist_t *tgt; zpool_load_policy_t policy; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; nvlist_t *nvi = NULL; int error; if (path) (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), path); else (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), zhp->zpool_name); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (path) { if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, errbuf)); /* * Don't allow error clearing for hot spares. Do allow * error clearing for l2cache devices. */ if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, errbuf)); zc.zc_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); } zpool_get_load_policy(rewindnvl, &policy); zc.zc_cookie = policy.zlp_rewind; zcmd_alloc_dst_nvlist(hdl, &zc, zhp->zpool_config_size * 2); zcmd_write_src_nvlist(hdl, &zc, rewindnvl); while ((error = zfs_ioctl(hdl, ZFS_IOC_CLEAR, &zc)) != 0 && errno == ENOMEM) zcmd_expand_dst_nvlist(hdl, &zc); if (!error || ((policy.zlp_rewind & ZPOOL_TRY_REWIND) && errno != EPERM && errno != EACCES)) { if (policy.zlp_rewind & (ZPOOL_DO_REWIND | ZPOOL_TRY_REWIND)) { (void) zcmd_read_dst_nvlist(hdl, &zc, &nvi); zpool_rewind_exclaim(hdl, zc.zc_name, ((policy.zlp_rewind & ZPOOL_TRY_REWIND) != 0), nvi); nvlist_free(nvi); } zcmd_free_nvlists(&zc); return (0); } zcmd_free_nvlists(&zc); return (zpool_standard_error(hdl, errno, errbuf)); } /* * Similar to zpool_clear(), but takes a GUID (used by fmd). */ int zpool_vdev_clear(zpool_handle_t *zhp, uint64_t guid) { zfs_cmd_t zc = {"\0"}; char errbuf[ERRBUFLEN]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot clear errors for %llx"), (u_longlong_t)guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = ZPOOL_NO_REWIND; if (zfs_ioctl(hdl, ZFS_IOC_CLEAR, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, errbuf)); } /* * Change the GUID for a pool. */ int zpool_reguid(zpool_handle_t *zhp) { char errbuf[ERRBUFLEN]; libzfs_handle_t *hdl = zhp->zpool_hdl; zfs_cmd_t zc = {"\0"}; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot reguid '%s'"), zhp->zpool_name); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (zfs_ioctl(hdl, ZFS_IOC_POOL_REGUID, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, errbuf)); } /* * Reopen the pool. */ int zpool_reopen_one(zpool_handle_t *zhp, void *data) { libzfs_handle_t *hdl = zpool_get_handle(zhp); const char *pool_name = zpool_get_name(zhp); boolean_t *scrub_restart = data; int error; error = lzc_reopen(pool_name, *scrub_restart); if (error) { return (zpool_standard_error_fmt(hdl, error, dgettext(TEXT_DOMAIN, "cannot reopen '%s'"), pool_name)); } return (0); } /* call into libzfs_core to execute the sync IOCTL per pool */ int zpool_sync_one(zpool_handle_t *zhp, void *data) { int ret; libzfs_handle_t *hdl = zpool_get_handle(zhp); const char *pool_name = zpool_get_name(zhp); boolean_t *force = data; nvlist_t *innvl = fnvlist_alloc(); fnvlist_add_boolean_value(innvl, "force", *force); if ((ret = lzc_sync(pool_name, innvl, NULL)) != 0) { nvlist_free(innvl); return (zpool_standard_error_fmt(hdl, ret, dgettext(TEXT_DOMAIN, "sync '%s' failed"), pool_name)); } nvlist_free(innvl); return (0); } #define PATH_BUF_LEN 64 /* * Given a vdev, return the name to display in iostat. If the vdev has a path, * we use that, stripping off any leading "/dev/dsk/"; if not, we use the type. * We also check if this is a whole disk, in which case we strip off the * trailing 's0' slice name. * * This routine is also responsible for identifying when disks have been * reconfigured in a new location. The kernel will have opened the device by * devid, but the path will still refer to the old location. To catch this, we * first do a path -> devid translation (which is fast for the common case). If * the devid matches, we're done. If not, we do a reverse devid -> path * translation and issue the appropriate ioctl() to update the path of the vdev. * If 'zhp' is NULL, then this is an exported pool, and we don't need to do any * of these checks. */ char * zpool_vdev_name(libzfs_handle_t *hdl, zpool_handle_t *zhp, nvlist_t *nv, int name_flags) { const char *type, *tpath; const char *path; uint64_t value; char buf[PATH_BUF_LEN]; char tmpbuf[PATH_BUF_LEN * 2]; /* * vdev_name will be "root"/"root-0" for the root vdev, but it is the * zpool name that will be displayed to the user. */ type = fnvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE); if (zhp != NULL && strcmp(type, "root") == 0) return (zfs_strdup(hdl, zpool_get_name(zhp))); if (libzfs_envvar_is_set("ZPOOL_VDEV_NAME_PATH")) name_flags |= VDEV_NAME_PATH; if (libzfs_envvar_is_set("ZPOOL_VDEV_NAME_GUID")) name_flags |= VDEV_NAME_GUID; if (libzfs_envvar_is_set("ZPOOL_VDEV_NAME_FOLLOW_LINKS")) name_flags |= VDEV_NAME_FOLLOW_LINKS; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &value) == 0 || name_flags & VDEV_NAME_GUID) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &value); (void) snprintf(buf, sizeof (buf), "%llu", (u_longlong_t)value); path = buf; } else if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &tpath) == 0) { path = tpath; if (name_flags & VDEV_NAME_FOLLOW_LINKS) { char *rp = realpath(path, NULL); if (rp) { strlcpy(buf, rp, sizeof (buf)); path = buf; free(rp); } } /* * For a block device only use the name. */ if ((strcmp(type, VDEV_TYPE_DISK) == 0) && !(name_flags & VDEV_NAME_PATH)) { path = zfs_strip_path(path); } /* * Remove the partition from the path if this is a whole disk. */ if (strcmp(type, VDEV_TYPE_DRAID_SPARE) != 0 && nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &value) == 0 && value && !(name_flags & VDEV_NAME_PATH)) { return (zfs_strip_partition(path)); } } else { path = type; /* * If it's a raidz device, we need to stick in the parity level. */ if (strcmp(path, VDEV_TYPE_RAIDZ) == 0) { value = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY); (void) snprintf(buf, sizeof (buf), "%s%llu", path, (u_longlong_t)value); path = buf; } /* * If it's a dRAID device, we add parity, groups, and spares. */ if (strcmp(path, VDEV_TYPE_DRAID) == 0) { uint64_t ndata, nparity, nspares; nvlist_t **child; uint_t children; verify(nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0); nparity = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY); ndata = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NDATA); nspares = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NSPARES); path = zpool_draid_name(buf, sizeof (buf), ndata, nparity, nspares, children); } /* * We identify each top-level vdev by using a * naming convention. */ if (name_flags & VDEV_NAME_TYPE_ID) { uint64_t id = fnvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID); (void) snprintf(tmpbuf, sizeof (tmpbuf), "%s-%llu", path, (u_longlong_t)id); path = tmpbuf; } } return (zfs_strdup(hdl, path)); } static int zbookmark_mem_compare(const void *a, const void *b) { return (memcmp(a, b, sizeof (zbookmark_phys_t))); } /* * Retrieve the persistent error log, uniquify the members, and return to the * caller. */ int zpool_get_errlog(zpool_handle_t *zhp, nvlist_t **nverrlistp) { zfs_cmd_t zc = {"\0"}; libzfs_handle_t *hdl = zhp->zpool_hdl; zbookmark_phys_t *buf; uint64_t buflen = 10000; /* approx. 1MB of RAM */ if (fnvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_ERRCOUNT) == 0) return (0); /* * Retrieve the raw error list from the kernel. If it doesn't fit, * allocate a larger buffer and retry. */ (void) strcpy(zc.zc_name, zhp->zpool_name); for (;;) { buf = zfs_alloc(zhp->zpool_hdl, buflen * sizeof (zbookmark_phys_t)); zc.zc_nvlist_dst = (uintptr_t)buf; zc.zc_nvlist_dst_size = buflen; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_ERROR_LOG, &zc) != 0) { free(buf); if (errno == ENOMEM) { buflen *= 2; } else { return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "errors: List of " "errors unavailable"))); } } else { break; } } /* * Sort the resulting bookmarks. This is a little confusing due to the * implementation of ZFS_IOC_ERROR_LOG. The bookmarks are copied last * to first, and 'zc_nvlist_dst_size' indicates the number of bookmarks * _not_ copied as part of the process. So we point the start of our * array appropriate and decrement the total number of elements. */ zbookmark_phys_t *zb = buf + zc.zc_nvlist_dst_size; uint64_t zblen = buflen - zc.zc_nvlist_dst_size; qsort(zb, zblen, sizeof (zbookmark_phys_t), zbookmark_mem_compare); verify(nvlist_alloc(nverrlistp, 0, KM_SLEEP) == 0); /* * Fill in the nverrlistp with nvlist's of dataset and object numbers. */ for (uint64_t i = 0; i < zblen; i++) { nvlist_t *nv; /* ignoring zb_blkid and zb_level for now */ if (i > 0 && zb[i-1].zb_objset == zb[i].zb_objset && zb[i-1].zb_object == zb[i].zb_object) continue; if (nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) != 0) goto nomem; if (nvlist_add_uint64(nv, ZPOOL_ERR_DATASET, zb[i].zb_objset) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_uint64(nv, ZPOOL_ERR_OBJECT, zb[i].zb_object) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_nvlist(*nverrlistp, "ejk", nv) != 0) { nvlist_free(nv); goto nomem; } nvlist_free(nv); } free(buf); return (0); nomem: free(buf); return (no_memory(zhp->zpool_hdl)); } /* * Upgrade a ZFS pool to the latest on-disk version. */ int zpool_upgrade(zpool_handle_t *zhp, uint64_t new_version) { zfs_cmd_t zc = {"\0"}; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strcpy(zc.zc_name, zhp->zpool_name); zc.zc_cookie = new_version; if (zfs_ioctl(hdl, ZFS_IOC_POOL_UPGRADE, &zc) != 0) return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot upgrade '%s'"), zhp->zpool_name)); return (0); } void zfs_save_arguments(int argc, char **argv, char *string, int len) { int i; (void) strlcpy(string, zfs_basename(argv[0]), len); for (i = 1; i < argc; i++) { (void) strlcat(string, " ", len); (void) strlcat(string, argv[i], len); } } int zpool_log_history(libzfs_handle_t *hdl, const char *message) { zfs_cmd_t zc = {"\0"}; nvlist_t *args; args = fnvlist_alloc(); fnvlist_add_string(args, "message", message); zcmd_write_src_nvlist(hdl, &zc, args); int err = zfs_ioctl(hdl, ZFS_IOC_LOG_HISTORY, &zc); nvlist_free(args); zcmd_free_nvlists(&zc); return (err); } /* * Perform ioctl to get some command history of a pool. * * 'buf' is the buffer to fill up to 'len' bytes. 'off' is the * logical offset of the history buffer to start reading from. * * Upon return, 'off' is the next logical offset to read from and * 'len' is the actual amount of bytes read into 'buf'. */ static int get_history(zpool_handle_t *zhp, char *buf, uint64_t *off, uint64_t *len) { zfs_cmd_t zc = {"\0"}; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_history = (uint64_t)(uintptr_t)buf; zc.zc_history_len = *len; zc.zc_history_offset = *off; if (zfs_ioctl(hdl, ZFS_IOC_POOL_GET_HISTORY, &zc) != 0) { switch (errno) { case EPERM: return (zfs_error_fmt(hdl, EZFS_PERM, dgettext(TEXT_DOMAIN, "cannot show history for pool '%s'"), zhp->zpool_name)); case ENOENT: return (zfs_error_fmt(hdl, EZFS_NOHISTORY, dgettext(TEXT_DOMAIN, "cannot get history for pool " "'%s'"), zhp->zpool_name)); case ENOTSUP: return (zfs_error_fmt(hdl, EZFS_BADVERSION, dgettext(TEXT_DOMAIN, "cannot get history for pool " "'%s', pool must be upgraded"), zhp->zpool_name)); default: return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get history for '%s'"), zhp->zpool_name)); } } *len = zc.zc_history_len; *off = zc.zc_history_offset; return (0); } /* * Retrieve the command history of a pool. */ int zpool_get_history(zpool_handle_t *zhp, nvlist_t **nvhisp, uint64_t *off, boolean_t *eof) { libzfs_handle_t *hdl = zhp->zpool_hdl; char *buf; int buflen = 128 * 1024; nvlist_t **records = NULL; uint_t numrecords = 0; int err = 0, i; uint64_t start = *off; buf = zfs_alloc(hdl, buflen); /* process about 1MiB a time */ while (*off - start < 1024 * 1024) { uint64_t bytes_read = buflen; uint64_t leftover; if ((err = get_history(zhp, buf, off, &bytes_read)) != 0) break; /* if nothing else was read in, we're at EOF, just return */ if (!bytes_read) { *eof = B_TRUE; break; } if ((err = zpool_history_unpack(buf, bytes_read, &leftover, &records, &numrecords)) != 0) { zpool_standard_error_fmt(hdl, err, dgettext(TEXT_DOMAIN, "cannot get history for '%s'"), zhp->zpool_name); break; } *off -= leftover; if (leftover == bytes_read) { /* * no progress made, because buffer is not big enough * to hold this record; resize and retry. */ buflen *= 2; free(buf); buf = zfs_alloc(hdl, buflen); } } free(buf); if (!err) { *nvhisp = fnvlist_alloc(); fnvlist_add_nvlist_array(*nvhisp, ZPOOL_HIST_RECORD, (const nvlist_t **)records, numrecords); } for (i = 0; i < numrecords; i++) nvlist_free(records[i]); free(records); return (err); } /* * Retrieve the next event given the passed 'zevent_fd' file descriptor. * If there is a new event available 'nvp' will contain a newly allocated * nvlist and 'dropped' will be set to the number of missed events since * the last call to this function. When 'nvp' is set to NULL it indicates * no new events are available. In either case the function returns 0 and * it is up to the caller to free 'nvp'. In the case of a fatal error the * function will return a non-zero value. When the function is called in * blocking mode (the default, unless the ZEVENT_NONBLOCK flag is passed), * it will not return until a new event is available. */ int zpool_events_next(libzfs_handle_t *hdl, nvlist_t **nvp, int *dropped, unsigned flags, int zevent_fd) { zfs_cmd_t zc = {"\0"}; int error = 0; *nvp = NULL; *dropped = 0; zc.zc_cleanup_fd = zevent_fd; if (flags & ZEVENT_NONBLOCK) zc.zc_guid = ZEVENT_NONBLOCK; zcmd_alloc_dst_nvlist(hdl, &zc, ZEVENT_SIZE); retry: if (zfs_ioctl(hdl, ZFS_IOC_EVENTS_NEXT, &zc) != 0) { switch (errno) { case ESHUTDOWN: error = zfs_error_fmt(hdl, EZFS_POOLUNAVAIL, dgettext(TEXT_DOMAIN, "zfs shutdown")); goto out; case ENOENT: /* Blocking error case should not occur */ if (!(flags & ZEVENT_NONBLOCK)) error = zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get event")); goto out; case ENOMEM: zcmd_expand_dst_nvlist(hdl, &zc); goto retry; default: error = zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get event")); goto out; } } error = zcmd_read_dst_nvlist(hdl, &zc, nvp); if (error != 0) goto out; *dropped = (int)zc.zc_cookie; out: zcmd_free_nvlists(&zc); return (error); } /* * Clear all events. */ int zpool_events_clear(libzfs_handle_t *hdl, int *count) { zfs_cmd_t zc = {"\0"}; if (zfs_ioctl(hdl, ZFS_IOC_EVENTS_CLEAR, &zc) != 0) return (zpool_standard_error(hdl, errno, dgettext(TEXT_DOMAIN, "cannot clear events"))); if (count != NULL) *count = (int)zc.zc_cookie; /* # of events cleared */ return (0); } /* * Seek to a specific EID, ZEVENT_SEEK_START, or ZEVENT_SEEK_END for * the passed zevent_fd file handle. On success zero is returned, * otherwise -1 is returned and hdl->libzfs_error is set to the errno. */ int zpool_events_seek(libzfs_handle_t *hdl, uint64_t eid, int zevent_fd) { zfs_cmd_t zc = {"\0"}; int error = 0; zc.zc_guid = eid; zc.zc_cleanup_fd = zevent_fd; if (zfs_ioctl(hdl, ZFS_IOC_EVENTS_SEEK, &zc) != 0) { switch (errno) { case ENOENT: error = zfs_error_fmt(hdl, EZFS_NOENT, dgettext(TEXT_DOMAIN, "cannot get event")); break; case ENOMEM: error = zfs_error_fmt(hdl, EZFS_NOMEM, dgettext(TEXT_DOMAIN, "cannot get event")); break; default: error = zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get event")); break; } } return (error); } static void zpool_obj_to_path_impl(zpool_handle_t *zhp, uint64_t dsobj, uint64_t obj, char *pathname, size_t len, boolean_t always_unmounted) { zfs_cmd_t zc = {"\0"}; boolean_t mounted = B_FALSE; char *mntpnt = NULL; char dsname[ZFS_MAX_DATASET_NAME_LEN]; if (dsobj == 0) { /* special case for the MOS */ (void) snprintf(pathname, len, ":<0x%llx>", (longlong_t)obj); return; } /* get the dataset's name */ (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_obj = dsobj; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_DSOBJ_TO_DSNAME, &zc) != 0) { /* just write out a path of two object numbers */ (void) snprintf(pathname, len, "<0x%llx>:<0x%llx>", (longlong_t)dsobj, (longlong_t)obj); return; } (void) strlcpy(dsname, zc.zc_value, sizeof (dsname)); /* find out if the dataset is mounted */ mounted = !always_unmounted && is_mounted(zhp->zpool_hdl, dsname, &mntpnt); /* get the corrupted object's path */ (void) strlcpy(zc.zc_name, dsname, sizeof (zc.zc_name)); zc.zc_obj = obj; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_OBJ_TO_PATH, &zc) == 0) { if (mounted) { (void) snprintf(pathname, len, "%s%s", mntpnt, zc.zc_value); } else { (void) snprintf(pathname, len, "%s:%s", dsname, zc.zc_value); } } else { (void) snprintf(pathname, len, "%s:<0x%llx>", dsname, (longlong_t)obj); } free(mntpnt); } void zpool_obj_to_path(zpool_handle_t *zhp, uint64_t dsobj, uint64_t obj, char *pathname, size_t len) { zpool_obj_to_path_impl(zhp, dsobj, obj, pathname, len, B_FALSE); } void zpool_obj_to_path_ds(zpool_handle_t *zhp, uint64_t dsobj, uint64_t obj, char *pathname, size_t len) { zpool_obj_to_path_impl(zhp, dsobj, obj, pathname, len, B_TRUE); } /* * Wait while the specified activity is in progress in the pool. */ int zpool_wait(zpool_handle_t *zhp, zpool_wait_activity_t activity) { boolean_t missing; int error = zpool_wait_status(zhp, activity, &missing, NULL); if (missing) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, ENOENT, dgettext(TEXT_DOMAIN, "error waiting in pool '%s'"), zhp->zpool_name); return (ENOENT); } else { return (error); } } /* * Wait for the given activity and return the status of the wait (whether or not * any waiting was done) in the 'waited' parameter. Non-existent pools are * reported via the 'missing' parameter, rather than by printing an error * message. This is convenient when this function is called in a loop over a * long period of time (as it is, for example, by zpool's wait cmd). In that * scenario, a pool being exported or destroyed should be considered a normal * event, so we don't want to print an error when we find that the pool doesn't * exist. */ int zpool_wait_status(zpool_handle_t *zhp, zpool_wait_activity_t activity, boolean_t *missing, boolean_t *waited) { int error = lzc_wait(zhp->zpool_name, activity, waited); *missing = (error == ENOENT); if (*missing) return (0); if (error != 0) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, error, dgettext(TEXT_DOMAIN, "error waiting in pool '%s'"), zhp->zpool_name); } return (error); } int zpool_set_bootenv(zpool_handle_t *zhp, const nvlist_t *envmap) { int error = lzc_set_bootenv(zhp->zpool_name, envmap); if (error != 0) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, error, dgettext(TEXT_DOMAIN, "error setting bootenv in pool '%s'"), zhp->zpool_name); } return (error); } int zpool_get_bootenv(zpool_handle_t *zhp, nvlist_t **nvlp) { nvlist_t *nvl; int error; nvl = NULL; error = lzc_get_bootenv(zhp->zpool_name, &nvl); if (error != 0) { (void) zpool_standard_error_fmt(zhp->zpool_hdl, error, dgettext(TEXT_DOMAIN, "error getting bootenv in pool '%s'"), zhp->zpool_name); } else { *nvlp = nvl; } return (error); } /* * Attempt to read and parse feature file(s) (from "compatibility" property). * Files contain zpool feature names, comma or whitespace-separated. * Comments (# character to next newline) are discarded. * * Arguments: * compatibility : string containing feature filenames * features : either NULL or pointer to array of boolean * report : either NULL or pointer to string buffer * rlen : length of "report" buffer * * compatibility is NULL (unset), "", "off", "legacy", or list of * comma-separated filenames. filenames should either be absolute, * or relative to: * 1) ZPOOL_SYSCONF_COMPAT_D (eg: /etc/zfs/compatibility.d) or * 2) ZPOOL_DATA_COMPAT_D (eg: /usr/share/zfs/compatibility.d). * (Unset), "" or "off" => enable all features * "legacy" => disable all features * * Any feature names read from files which match unames in spa_feature_table * will have the corresponding boolean set in the features array (if non-NULL). * If more than one feature set specified, only features present in *all* of * them will be set. * * "report" if not NULL will be populated with a suitable status message. * * Return values: * ZPOOL_COMPATIBILITY_OK : files read and parsed ok * ZPOOL_COMPATIBILITY_BADFILE : file too big or not a text file * ZPOOL_COMPATIBILITY_BADTOKEN : SYSCONF file contains invalid feature name * ZPOOL_COMPATIBILITY_WARNTOKEN : DATA file contains invalid feature name * ZPOOL_COMPATIBILITY_NOFILES : no feature files found */ zpool_compat_status_t zpool_load_compat(const char *compat, boolean_t *features, char *report, size_t rlen) { int sdirfd, ddirfd, featfd; struct stat fs; char *fc; char *ps, *ls, *ws; char *file, *line, *word; char l_compat[ZFS_MAXPROPLEN]; boolean_t ret_nofiles = B_TRUE; boolean_t ret_badfile = B_FALSE; boolean_t ret_badtoken = B_FALSE; boolean_t ret_warntoken = B_FALSE; /* special cases (unset), "" and "off" => enable all features */ if (compat == NULL || compat[0] == '\0' || strcmp(compat, ZPOOL_COMPAT_OFF) == 0) { if (features != NULL) for (uint_t i = 0; i < SPA_FEATURES; i++) features[i] = B_TRUE; if (report != NULL) strlcpy(report, gettext("all features enabled"), rlen); return (ZPOOL_COMPATIBILITY_OK); } /* Final special case "legacy" => disable all features */ if (strcmp(compat, ZPOOL_COMPAT_LEGACY) == 0) { if (features != NULL) for (uint_t i = 0; i < SPA_FEATURES; i++) features[i] = B_FALSE; if (report != NULL) strlcpy(report, gettext("all features disabled"), rlen); return (ZPOOL_COMPATIBILITY_OK); } /* * Start with all true; will be ANDed with results from each file */ if (features != NULL) for (uint_t i = 0; i < SPA_FEATURES; i++) features[i] = B_TRUE; char err_badfile[ZFS_MAXPROPLEN] = ""; char err_badtoken[ZFS_MAXPROPLEN] = ""; /* * We ignore errors from the directory open() * as they're only needed if the filename is relative * which will be checked during the openat(). */ /* O_PATH safer than O_RDONLY if system allows it */ #if defined(O_PATH) #define ZC_DIR_FLAGS (O_DIRECTORY | O_CLOEXEC | O_PATH) #else #define ZC_DIR_FLAGS (O_DIRECTORY | O_CLOEXEC | O_RDONLY) #endif sdirfd = open(ZPOOL_SYSCONF_COMPAT_D, ZC_DIR_FLAGS); ddirfd = open(ZPOOL_DATA_COMPAT_D, ZC_DIR_FLAGS); (void) strlcpy(l_compat, compat, ZFS_MAXPROPLEN); for (file = strtok_r(l_compat, ",", &ps); file != NULL; file = strtok_r(NULL, ",", &ps)) { boolean_t l_features[SPA_FEATURES]; enum { Z_SYSCONF, Z_DATA } source; /* try sysconfdir first, then datadir */ source = Z_SYSCONF; if ((featfd = openat(sdirfd, file, O_RDONLY | O_CLOEXEC)) < 0) { featfd = openat(ddirfd, file, O_RDONLY | O_CLOEXEC); source = Z_DATA; } /* File readable and correct size? */ if (featfd < 0 || fstat(featfd, &fs) < 0 || fs.st_size < 1 || fs.st_size > ZPOOL_COMPAT_MAXSIZE) { (void) close(featfd); strlcat(err_badfile, file, ZFS_MAXPROPLEN); strlcat(err_badfile, " ", ZFS_MAXPROPLEN); ret_badfile = B_TRUE; continue; } /* Prefault the file if system allows */ #if defined(MAP_POPULATE) #define ZC_MMAP_FLAGS (MAP_PRIVATE | MAP_POPULATE) #elif defined(MAP_PREFAULT_READ) #define ZC_MMAP_FLAGS (MAP_PRIVATE | MAP_PREFAULT_READ) #else #define ZC_MMAP_FLAGS (MAP_PRIVATE) #endif /* private mmap() so we can strtok safely */ fc = (char *)mmap(NULL, fs.st_size, PROT_READ | PROT_WRITE, ZC_MMAP_FLAGS, featfd, 0); (void) close(featfd); /* map ok, and last character == newline? */ if (fc == MAP_FAILED || fc[fs.st_size - 1] != '\n') { (void) munmap((void *) fc, fs.st_size); strlcat(err_badfile, file, ZFS_MAXPROPLEN); strlcat(err_badfile, " ", ZFS_MAXPROPLEN); ret_badfile = B_TRUE; continue; } ret_nofiles = B_FALSE; for (uint_t i = 0; i < SPA_FEATURES; i++) l_features[i] = B_FALSE; /* replace final newline with NULL to ensure string ends */ fc[fs.st_size - 1] = '\0'; for (line = strtok_r(fc, "\n", &ls); line != NULL; line = strtok_r(NULL, "\n", &ls)) { /* discard comments */ char *r = strchr(line, '#'); if (r != NULL) *r = '\0'; for (word = strtok_r(line, ", \t", &ws); word != NULL; word = strtok_r(NULL, ", \t", &ws)) { /* Find matching feature name */ uint_t f; for (f = 0; f < SPA_FEATURES; f++) { zfeature_info_t *fi = &spa_feature_table[f]; if (strcmp(word, fi->fi_uname) == 0) { l_features[f] = B_TRUE; break; } } if (f < SPA_FEATURES) continue; /* found an unrecognized word */ /* lightly sanitize it */ if (strlen(word) > 32) word[32] = '\0'; for (char *c = word; *c != '\0'; c++) if (!isprint(*c)) *c = '?'; strlcat(err_badtoken, word, ZFS_MAXPROPLEN); strlcat(err_badtoken, " ", ZFS_MAXPROPLEN); if (source == Z_SYSCONF) ret_badtoken = B_TRUE; else ret_warntoken = B_TRUE; } } (void) munmap((void *) fc, fs.st_size); if (features != NULL) for (uint_t i = 0; i < SPA_FEATURES; i++) features[i] &= l_features[i]; } (void) close(sdirfd); (void) close(ddirfd); /* Return the most serious error */ if (ret_badfile) { if (report != NULL) snprintf(report, rlen, gettext("could not read/" "parse feature file(s): %s"), err_badfile); return (ZPOOL_COMPATIBILITY_BADFILE); } if (ret_nofiles) { if (report != NULL) strlcpy(report, gettext("no valid compatibility files specified"), rlen); return (ZPOOL_COMPATIBILITY_NOFILES); } if (ret_badtoken) { if (report != NULL) snprintf(report, rlen, gettext("invalid feature " "name(s) in local compatibility files: %s"), err_badtoken); return (ZPOOL_COMPATIBILITY_BADTOKEN); } if (ret_warntoken) { if (report != NULL) snprintf(report, rlen, gettext("unrecognized feature " "name(s) in distribution compatibility files: %s"), err_badtoken); return (ZPOOL_COMPATIBILITY_WARNTOKEN); } if (report != NULL) strlcpy(report, gettext("compatibility set ok"), rlen); return (ZPOOL_COMPATIBILITY_OK); } static int zpool_vdev_guid(zpool_handle_t *zhp, const char *vdevname, uint64_t *vdev_guid) { nvlist_t *tgt; boolean_t avail_spare, l2cache; verify(zhp != NULL); if (zpool_get_state(zhp) == POOL_STATE_UNAVAIL) { char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "pool is in an unavailable state")); return (zfs_error(zhp->zpool_hdl, EZFS_POOLUNAVAIL, errbuf)); } if ((tgt = zpool_find_vdev(zhp, vdevname, &avail_spare, &l2cache, NULL)) == NULL) { char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "can not find %s in %s"), vdevname, zhp->zpool_name); return (zfs_error(zhp->zpool_hdl, EZFS_NODEVICE, errbuf)); } *vdev_guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID); return (0); } /* * Get a vdev property value for 'prop' and return the value in * a pre-allocated buffer. */ int zpool_get_vdev_prop_value(nvlist_t *nvprop, vdev_prop_t prop, char *prop_name, char *buf, size_t len, zprop_source_t *srctype, boolean_t literal) { nvlist_t *nv; const char *strval; uint64_t intval; zprop_source_t src = ZPROP_SRC_NONE; if (prop == VDEV_PROP_USERPROP) { /* user property, prop_name must contain the property name */ assert(prop_name != NULL); if (nvlist_lookup_nvlist(nvprop, prop_name, &nv) == 0) { src = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); strval = fnvlist_lookup_string(nv, ZPROP_VALUE); } else { /* user prop not found */ return (-1); } (void) strlcpy(buf, strval, len); if (srctype) *srctype = src; return (0); } if (prop_name == NULL) prop_name = (char *)vdev_prop_to_name(prop); switch (vdev_prop_get_type(prop)) { case PROP_TYPE_STRING: if (nvlist_lookup_nvlist(nvprop, prop_name, &nv) == 0) { src = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); strval = fnvlist_lookup_string(nv, ZPROP_VALUE); } else { src = ZPROP_SRC_DEFAULT; if ((strval = vdev_prop_default_string(prop)) == NULL) strval = "-"; } (void) strlcpy(buf, strval, len); break; case PROP_TYPE_NUMBER: if (nvlist_lookup_nvlist(nvprop, prop_name, &nv) == 0) { src = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); intval = fnvlist_lookup_uint64(nv, ZPROP_VALUE); } else { src = ZPROP_SRC_DEFAULT; intval = vdev_prop_default_numeric(prop); } switch (prop) { case VDEV_PROP_ASIZE: case VDEV_PROP_PSIZE: case VDEV_PROP_SIZE: case VDEV_PROP_BOOTSIZE: case VDEV_PROP_ALLOCATED: case VDEV_PROP_FREE: case VDEV_PROP_READ_ERRORS: case VDEV_PROP_WRITE_ERRORS: case VDEV_PROP_CHECKSUM_ERRORS: case VDEV_PROP_INITIALIZE_ERRORS: case VDEV_PROP_TRIM_ERRORS: case VDEV_PROP_SLOW_IOS: case VDEV_PROP_OPS_NULL: case VDEV_PROP_OPS_READ: case VDEV_PROP_OPS_WRITE: case VDEV_PROP_OPS_FREE: case VDEV_PROP_OPS_CLAIM: case VDEV_PROP_OPS_TRIM: case VDEV_PROP_BYTES_NULL: case VDEV_PROP_BYTES_READ: case VDEV_PROP_BYTES_WRITE: case VDEV_PROP_BYTES_FREE: case VDEV_PROP_BYTES_CLAIM: case VDEV_PROP_BYTES_TRIM: if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) zfs_nicenum(intval, buf, len); } break; case VDEV_PROP_EXPANDSZ: if (intval == 0) { (void) strlcpy(buf, "-", len); } else if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) zfs_nicenum(intval, buf, len); } break; case VDEV_PROP_CAPACITY: if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) snprintf(buf, len, "%llu%%", (u_longlong_t)intval); } break; case VDEV_PROP_CHECKSUM_N: case VDEV_PROP_CHECKSUM_T: case VDEV_PROP_IO_N: case VDEV_PROP_IO_T: case VDEV_PROP_SLOW_IO_N: case VDEV_PROP_SLOW_IO_T: if (intval == UINT64_MAX) { (void) strlcpy(buf, "-", len); } else { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } break; case VDEV_PROP_FRAGMENTATION: if (intval == UINT64_MAX) { (void) strlcpy(buf, "-", len); } else { (void) snprintf(buf, len, "%llu%%", (u_longlong_t)intval); } break; case VDEV_PROP_STATE: if (literal) { (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } else { (void) strlcpy(buf, zpool_state_to_name(intval, VDEV_AUX_NONE), len); } break; default: (void) snprintf(buf, len, "%llu", (u_longlong_t)intval); } break; case PROP_TYPE_INDEX: if (nvlist_lookup_nvlist(nvprop, prop_name, &nv) == 0) { src = fnvlist_lookup_uint64(nv, ZPROP_SOURCE); intval = fnvlist_lookup_uint64(nv, ZPROP_VALUE); } else { /* 'trim_support' only valid for leaf vdevs */ if (prop == VDEV_PROP_TRIM_SUPPORT) { (void) strlcpy(buf, "-", len); break; } src = ZPROP_SRC_DEFAULT; intval = vdev_prop_default_numeric(prop); /* Only use if provided by the RAIDZ VDEV above */ if (prop == VDEV_PROP_RAIDZ_EXPANDING) return (ENOENT); } if (vdev_prop_index_to_string(prop, intval, (const char **)&strval) != 0) return (-1); (void) strlcpy(buf, strval, len); break; default: abort(); } if (srctype) *srctype = src; return (0); } /* * Get a vdev property value for 'prop_name' and return the value in * a pre-allocated buffer. */ int zpool_get_vdev_prop(zpool_handle_t *zhp, const char *vdevname, vdev_prop_t prop, char *prop_name, char *buf, size_t len, zprop_source_t *srctype, boolean_t literal) { nvlist_t *reqnvl, *reqprops; nvlist_t *retprops = NULL; uint64_t vdev_guid = 0; int ret; if ((ret = zpool_vdev_guid(zhp, vdevname, &vdev_guid)) != 0) return (ret); if (nvlist_alloc(&reqnvl, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); if (nvlist_alloc(&reqprops, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); fnvlist_add_uint64(reqnvl, ZPOOL_VDEV_PROPS_GET_VDEV, vdev_guid); if (prop != VDEV_PROP_USERPROP) { /* prop_name overrides prop value */ if (prop_name != NULL) prop = vdev_name_to_prop(prop_name); else prop_name = (char *)vdev_prop_to_name(prop); assert(prop < VDEV_NUM_PROPS); } assert(prop_name != NULL); if (nvlist_add_uint64(reqprops, prop_name, prop) != 0) { nvlist_free(reqnvl); nvlist_free(reqprops); return (no_memory(zhp->zpool_hdl)); } fnvlist_add_nvlist(reqnvl, ZPOOL_VDEV_PROPS_GET_PROPS, reqprops); ret = lzc_get_vdev_prop(zhp->zpool_name, reqnvl, &retprops); if (ret == 0) { ret = zpool_get_vdev_prop_value(retprops, prop, prop_name, buf, len, srctype, literal); } else { char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot get vdev property %s from" " %s in %s"), prop_name, vdevname, zhp->zpool_name); (void) zpool_standard_error(zhp->zpool_hdl, ret, errbuf); } nvlist_free(reqnvl); nvlist_free(reqprops); nvlist_free(retprops); return (ret); } /* * Get all vdev properties */ int zpool_get_all_vdev_props(zpool_handle_t *zhp, const char *vdevname, nvlist_t **outnvl) { nvlist_t *nvl = NULL; uint64_t vdev_guid = 0; int ret; if ((ret = zpool_vdev_guid(zhp, vdevname, &vdev_guid)) != 0) return (ret); if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); fnvlist_add_uint64(nvl, ZPOOL_VDEV_PROPS_GET_VDEV, vdev_guid); ret = lzc_get_vdev_prop(zhp->zpool_name, nvl, outnvl); nvlist_free(nvl); if (ret) { char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot get vdev properties for" " %s in %s"), vdevname, zhp->zpool_name); (void) zpool_standard_error(zhp->zpool_hdl, errno, errbuf); } return (ret); } /* * Set vdev property */ int zpool_set_vdev_prop(zpool_handle_t *zhp, const char *vdevname, const char *propname, const char *propval) { int ret; nvlist_t *nvl = NULL; nvlist_t *outnvl = NULL; nvlist_t *props; nvlist_t *realprops; prop_flags_t flags = { 0 }; uint64_t version; uint64_t vdev_guid; if ((ret = zpool_vdev_guid(zhp, vdevname, &vdev_guid)) != 0) return (ret); if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); fnvlist_add_uint64(nvl, ZPOOL_VDEV_PROPS_SET_VDEV, vdev_guid); if (nvlist_add_string(props, propname, propval) != 0) { nvlist_free(props); return (no_memory(zhp->zpool_hdl)); } char errbuf[ERRBUFLEN]; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot set property %s for %s on %s"), propname, vdevname, zhp->zpool_name); flags.vdevprop = 1; version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if ((realprops = zpool_valid_proplist(zhp->zpool_hdl, zhp->zpool_name, props, version, flags, errbuf)) == NULL) { nvlist_free(props); nvlist_free(nvl); return (-1); } nvlist_free(props); props = realprops; fnvlist_add_nvlist(nvl, ZPOOL_VDEV_PROPS_SET_PROPS, props); ret = lzc_set_vdev_prop(zhp->zpool_name, nvl, &outnvl); nvlist_free(props); nvlist_free(nvl); nvlist_free(outnvl); if (ret) (void) zpool_standard_error(zhp->zpool_hdl, errno, errbuf); return (ret); } diff --git a/lib/libzfs/libzfs_util.c b/lib/libzfs/libzfs_util.c index 73ae0950ccb6..b865af71a1dc 100644 --- a/lib/libzfs/libzfs_util.c +++ b/lib/libzfs/libzfs_util.c @@ -1,2279 +1,2293 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2020 Joyent, Inc. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2016 Igor Kozhukhov * Copyright (c) 2017 Datto Inc. * Copyright (c) 2020 The FreeBSD Foundation * * Portions of this software were developed by Allan Jude * under sponsorship from the FreeBSD Foundation. */ /* * Internal utility routines for the ZFS library. */ #include #include #include #include #include #include #include #include #include #if LIBFETCH_DYNAMIC #include #endif #include #include #include #include #include #include #include #include "libzfs_impl.h" #include "zfs_prop.h" #include "zfeature_common.h" #include #include /* * We only care about the scheme in order to match the scheme * with the handler. Each handler should validate the full URI * as necessary. */ #define URI_REGEX "^\\([A-Za-z][A-Za-z0-9+.\\-]*\\):" int libzfs_errno(libzfs_handle_t *hdl) { return (hdl->libzfs_error); } const char * libzfs_error_action(libzfs_handle_t *hdl) { return (hdl->libzfs_action); } const char * libzfs_error_description(libzfs_handle_t *hdl) { if (hdl->libzfs_desc[0] != '\0') return (hdl->libzfs_desc); switch (hdl->libzfs_error) { case EZFS_NOMEM: return (dgettext(TEXT_DOMAIN, "out of memory")); case EZFS_BADPROP: return (dgettext(TEXT_DOMAIN, "invalid property value")); case EZFS_PROPREADONLY: return (dgettext(TEXT_DOMAIN, "read-only property")); case EZFS_PROPTYPE: return (dgettext(TEXT_DOMAIN, "property doesn't apply to " "datasets of this type")); case EZFS_PROPNONINHERIT: return (dgettext(TEXT_DOMAIN, "property cannot be inherited")); case EZFS_PROPSPACE: return (dgettext(TEXT_DOMAIN, "invalid quota or reservation")); case EZFS_BADTYPE: return (dgettext(TEXT_DOMAIN, "operation not applicable to " "datasets of this type")); case EZFS_BUSY: return (dgettext(TEXT_DOMAIN, "pool or dataset is busy")); case EZFS_EXISTS: return (dgettext(TEXT_DOMAIN, "pool or dataset exists")); case EZFS_NOENT: return (dgettext(TEXT_DOMAIN, "no such pool or dataset")); case EZFS_BADSTREAM: return (dgettext(TEXT_DOMAIN, "invalid backup stream")); case EZFS_DSREADONLY: return (dgettext(TEXT_DOMAIN, "dataset is read-only")); case EZFS_VOLTOOBIG: return (dgettext(TEXT_DOMAIN, "volume size exceeds limit for " "this system")); case EZFS_INVALIDNAME: return (dgettext(TEXT_DOMAIN, "invalid name")); case EZFS_BADRESTORE: return (dgettext(TEXT_DOMAIN, "unable to restore to " "destination")); case EZFS_BADBACKUP: return (dgettext(TEXT_DOMAIN, "backup failed")); case EZFS_BADTARGET: return (dgettext(TEXT_DOMAIN, "invalid target vdev")); case EZFS_NODEVICE: return (dgettext(TEXT_DOMAIN, "no such device in pool")); case EZFS_BADDEV: return (dgettext(TEXT_DOMAIN, "invalid device")); case EZFS_NOREPLICAS: return (dgettext(TEXT_DOMAIN, "no valid replicas")); case EZFS_RESILVERING: return (dgettext(TEXT_DOMAIN, "currently resilvering")); case EZFS_BADVERSION: return (dgettext(TEXT_DOMAIN, "unsupported version or " "feature")); case EZFS_POOLUNAVAIL: return (dgettext(TEXT_DOMAIN, "pool is unavailable")); case EZFS_DEVOVERFLOW: return (dgettext(TEXT_DOMAIN, "too many devices in one vdev")); case EZFS_BADPATH: return (dgettext(TEXT_DOMAIN, "must be an absolute path")); case EZFS_CROSSTARGET: return (dgettext(TEXT_DOMAIN, "operation crosses datasets or " "pools")); case EZFS_ZONED: return (dgettext(TEXT_DOMAIN, "dataset in use by local zone")); case EZFS_MOUNTFAILED: return (dgettext(TEXT_DOMAIN, "mount failed")); case EZFS_UMOUNTFAILED: return (dgettext(TEXT_DOMAIN, "unmount failed")); case EZFS_UNSHARENFSFAILED: return (dgettext(TEXT_DOMAIN, "NFS share removal failed")); case EZFS_SHARENFSFAILED: return (dgettext(TEXT_DOMAIN, "NFS share creation failed")); case EZFS_UNSHARESMBFAILED: return (dgettext(TEXT_DOMAIN, "SMB share removal failed")); case EZFS_SHARESMBFAILED: return (dgettext(TEXT_DOMAIN, "SMB share creation failed")); case EZFS_PERM: return (dgettext(TEXT_DOMAIN, "permission denied")); case EZFS_NOSPC: return (dgettext(TEXT_DOMAIN, "out of space")); case EZFS_FAULT: return (dgettext(TEXT_DOMAIN, "bad address")); case EZFS_IO: return (dgettext(TEXT_DOMAIN, "I/O error")); case EZFS_INTR: return (dgettext(TEXT_DOMAIN, "signal received")); case EZFS_CKSUM: return (dgettext(TEXT_DOMAIN, "insufficient replicas")); case EZFS_ISSPARE: return (dgettext(TEXT_DOMAIN, "device is reserved as a hot " "spare")); case EZFS_INVALCONFIG: return (dgettext(TEXT_DOMAIN, "invalid vdev configuration")); case EZFS_RECURSIVE: return (dgettext(TEXT_DOMAIN, "recursive dataset dependency")); case EZFS_NOHISTORY: return (dgettext(TEXT_DOMAIN, "no history available")); case EZFS_POOLPROPS: return (dgettext(TEXT_DOMAIN, "failed to retrieve " "pool properties")); case EZFS_POOL_NOTSUP: return (dgettext(TEXT_DOMAIN, "operation not supported " "on this type of pool")); case EZFS_POOL_INVALARG: return (dgettext(TEXT_DOMAIN, "invalid argument for " "this pool operation")); case EZFS_NAMETOOLONG: return (dgettext(TEXT_DOMAIN, "dataset name is too long")); case EZFS_OPENFAILED: return (dgettext(TEXT_DOMAIN, "open failed")); case EZFS_NOCAP: return (dgettext(TEXT_DOMAIN, "disk capacity information could not be retrieved")); case EZFS_LABELFAILED: return (dgettext(TEXT_DOMAIN, "write of label failed")); case EZFS_BADWHO: return (dgettext(TEXT_DOMAIN, "invalid user/group")); case EZFS_BADPERM: return (dgettext(TEXT_DOMAIN, "invalid permission")); case EZFS_BADPERMSET: return (dgettext(TEXT_DOMAIN, "invalid permission set name")); case EZFS_NODELEGATION: return (dgettext(TEXT_DOMAIN, "delegated administration is " "disabled on pool")); case EZFS_BADCACHE: return (dgettext(TEXT_DOMAIN, "invalid or missing cache file")); case EZFS_ISL2CACHE: return (dgettext(TEXT_DOMAIN, "device is in use as a cache")); case EZFS_VDEVNOTSUP: return (dgettext(TEXT_DOMAIN, "vdev specification is not " "supported")); case EZFS_NOTSUP: return (dgettext(TEXT_DOMAIN, "operation not supported " "on this dataset")); case EZFS_IOC_NOTSUPPORTED: return (dgettext(TEXT_DOMAIN, "operation not supported by " "zfs kernel module")); case EZFS_ACTIVE_SPARE: return (dgettext(TEXT_DOMAIN, "pool has active shared spare " "device")); case EZFS_UNPLAYED_LOGS: return (dgettext(TEXT_DOMAIN, "log device has unplayed intent " "logs")); case EZFS_REFTAG_RELE: return (dgettext(TEXT_DOMAIN, "no such tag on this dataset")); case EZFS_REFTAG_HOLD: return (dgettext(TEXT_DOMAIN, "tag already exists on this " "dataset")); case EZFS_TAGTOOLONG: return (dgettext(TEXT_DOMAIN, "tag too long")); case EZFS_PIPEFAILED: return (dgettext(TEXT_DOMAIN, "pipe create failed")); case EZFS_THREADCREATEFAILED: return (dgettext(TEXT_DOMAIN, "thread create failed")); case EZFS_POSTSPLIT_ONLINE: return (dgettext(TEXT_DOMAIN, "disk was split from this pool " "into a new one")); case EZFS_SCRUB_PAUSED: return (dgettext(TEXT_DOMAIN, "scrub is paused; " "use 'zpool scrub' to resume scrub")); case EZFS_SCRUB_PAUSED_TO_CANCEL: return (dgettext(TEXT_DOMAIN, "scrub is paused; " "use 'zpool scrub' to resume or 'zpool scrub -s' to " "cancel scrub")); case EZFS_SCRUBBING: return (dgettext(TEXT_DOMAIN, "currently scrubbing; " "use 'zpool scrub -s' to cancel scrub")); case EZFS_ERRORSCRUBBING: return (dgettext(TEXT_DOMAIN, "currently error scrubbing; " "use 'zpool scrub -s' to cancel error scrub")); case EZFS_ERRORSCRUB_PAUSED: return (dgettext(TEXT_DOMAIN, "error scrub is paused; " "use 'zpool scrub -e' to resume error scrub")); case EZFS_NO_SCRUB: return (dgettext(TEXT_DOMAIN, "there is no active scrub")); case EZFS_DIFF: return (dgettext(TEXT_DOMAIN, "unable to generate diffs")); case EZFS_DIFFDATA: return (dgettext(TEXT_DOMAIN, "invalid diff data")); case EZFS_POOLREADONLY: return (dgettext(TEXT_DOMAIN, "pool is read-only")); case EZFS_NO_PENDING: return (dgettext(TEXT_DOMAIN, "operation is not " "in progress")); case EZFS_CHECKPOINT_EXISTS: return (dgettext(TEXT_DOMAIN, "checkpoint exists")); case EZFS_DISCARDING_CHECKPOINT: return (dgettext(TEXT_DOMAIN, "currently discarding " "checkpoint")); case EZFS_NO_CHECKPOINT: return (dgettext(TEXT_DOMAIN, "checkpoint does not exist")); case EZFS_DEVRM_IN_PROGRESS: return (dgettext(TEXT_DOMAIN, "device removal in progress")); case EZFS_VDEV_TOO_BIG: return (dgettext(TEXT_DOMAIN, "device exceeds supported size")); case EZFS_ACTIVE_POOL: return (dgettext(TEXT_DOMAIN, "pool is imported on a " "different host")); case EZFS_CRYPTOFAILED: return (dgettext(TEXT_DOMAIN, "encryption failure")); case EZFS_TOOMANY: return (dgettext(TEXT_DOMAIN, "argument list too long")); case EZFS_INITIALIZING: return (dgettext(TEXT_DOMAIN, "currently initializing")); case EZFS_NO_INITIALIZE: return (dgettext(TEXT_DOMAIN, "there is no active " "initialization")); case EZFS_WRONG_PARENT: return (dgettext(TEXT_DOMAIN, "invalid parent dataset")); case EZFS_TRIMMING: return (dgettext(TEXT_DOMAIN, "currently trimming")); case EZFS_NO_TRIM: return (dgettext(TEXT_DOMAIN, "there is no active trim")); case EZFS_TRIM_NOTSUP: return (dgettext(TEXT_DOMAIN, "trim operations are not " "supported by this device")); case EZFS_NO_RESILVER_DEFER: return (dgettext(TEXT_DOMAIN, "this action requires the " "resilver_defer feature")); case EZFS_EXPORT_IN_PROGRESS: return (dgettext(TEXT_DOMAIN, "pool export in progress")); case EZFS_REBUILDING: return (dgettext(TEXT_DOMAIN, "currently sequentially " "resilvering")); case EZFS_VDEV_NOTSUP: return (dgettext(TEXT_DOMAIN, "operation not supported " "on this type of vdev")); case EZFS_NOT_USER_NAMESPACE: return (dgettext(TEXT_DOMAIN, "the provided file " "was not a user namespace file")); case EZFS_RESUME_EXISTS: return (dgettext(TEXT_DOMAIN, "Resuming recv on existing " "dataset without force")); case EZFS_RAIDZ_EXPAND_IN_PROGRESS: return (dgettext(TEXT_DOMAIN, "raidz expansion in progress")); case EZFS_ASHIFT_MISMATCH: return (dgettext(TEXT_DOMAIN, "adding devices with " "different physical sector sizes is not allowed")); case EZFS_UNKNOWN: return (dgettext(TEXT_DOMAIN, "unknown error")); default: assert(hdl->libzfs_error == 0); return (dgettext(TEXT_DOMAIN, "no error")); } } void zfs_error_aux(libzfs_handle_t *hdl, const char *fmt, ...) { va_list ap; va_start(ap, fmt); (void) vsnprintf(hdl->libzfs_desc, sizeof (hdl->libzfs_desc), fmt, ap); hdl->libzfs_desc_active = 1; va_end(ap); } static void zfs_verror(libzfs_handle_t *hdl, int error, const char *fmt, va_list ap) { (void) vsnprintf(hdl->libzfs_action, sizeof (hdl->libzfs_action), fmt, ap); hdl->libzfs_error = error; if (hdl->libzfs_desc_active) hdl->libzfs_desc_active = 0; else hdl->libzfs_desc[0] = '\0'; if (hdl->libzfs_printerr) { if (error == EZFS_UNKNOWN) { (void) fprintf(stderr, dgettext(TEXT_DOMAIN, "internal " "error: %s: %s\n"), hdl->libzfs_action, libzfs_error_description(hdl)); abort(); } (void) fprintf(stderr, "%s: %s\n", hdl->libzfs_action, libzfs_error_description(hdl)); if (error == EZFS_NOMEM) exit(1); } } int zfs_error(libzfs_handle_t *hdl, int error, const char *msg) { return (zfs_error_fmt(hdl, error, "%s", msg)); } int zfs_error_fmt(libzfs_handle_t *hdl, int error, const char *fmt, ...) { va_list ap; va_start(ap, fmt); zfs_verror(hdl, error, fmt, ap); va_end(ap); return (-1); } static int zfs_common_error(libzfs_handle_t *hdl, int error, const char *fmt, va_list ap) { switch (error) { case EPERM: case EACCES: zfs_verror(hdl, EZFS_PERM, fmt, ap); return (-1); case ECANCELED: zfs_verror(hdl, EZFS_NODELEGATION, fmt, ap); return (-1); case EIO: zfs_verror(hdl, EZFS_IO, fmt, ap); return (-1); case EFAULT: zfs_verror(hdl, EZFS_FAULT, fmt, ap); return (-1); case EINTR: zfs_verror(hdl, EZFS_INTR, fmt, ap); return (-1); case ECKSUM: zfs_verror(hdl, EZFS_CKSUM, fmt, ap); return (-1); } return (0); } int zfs_standard_error(libzfs_handle_t *hdl, int error, const char *msg) { return (zfs_standard_error_fmt(hdl, error, "%s", msg)); } int zfs_standard_error_fmt(libzfs_handle_t *hdl, int error, const char *fmt, ...) { va_list ap; va_start(ap, fmt); if (zfs_common_error(hdl, error, fmt, ap) != 0) { va_end(ap); return (-1); } switch (error) { case ENXIO: case ENODEV: case EPIPE: zfs_verror(hdl, EZFS_IO, fmt, ap); break; case ENOENT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dataset does not exist")); zfs_verror(hdl, EZFS_NOENT, fmt, ap); break; case ENOSPC: case EDQUOT: zfs_verror(hdl, EZFS_NOSPC, fmt, ap); break; case EEXIST: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dataset already exists")); zfs_verror(hdl, EZFS_EXISTS, fmt, ap); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dataset is busy")); zfs_verror(hdl, EZFS_BUSY, fmt, ap); break; case EROFS: zfs_verror(hdl, EZFS_POOLREADONLY, fmt, ap); break; case ENAMETOOLONG: zfs_verror(hdl, EZFS_NAMETOOLONG, fmt, ap); break; case ENOTSUP: zfs_verror(hdl, EZFS_BADVERSION, fmt, ap); break; case EAGAIN: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool I/O is currently suspended")); zfs_verror(hdl, EZFS_POOLUNAVAIL, fmt, ap); break; case EREMOTEIO: zfs_verror(hdl, EZFS_ACTIVE_POOL, fmt, ap); break; case ZFS_ERR_UNKNOWN_SEND_STREAM_FEATURE: case ZFS_ERR_IOC_CMD_UNAVAIL: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs " "module does not support this operation. A reboot may " "be required to enable this operation.")); zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_IOC_ARG_UNAVAIL: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs " "module does not support an option for this operation. " "A reboot may be required to enable this option.")); zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_IOC_ARG_REQUIRED: case ZFS_ERR_IOC_ARG_BADTYPE: zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_WRONG_PARENT: zfs_verror(hdl, EZFS_WRONG_PARENT, fmt, ap); break; case ZFS_ERR_BADPROP: zfs_verror(hdl, EZFS_BADPROP, fmt, ap); break; case ZFS_ERR_NOT_USER_NAMESPACE: zfs_verror(hdl, EZFS_NOT_USER_NAMESPACE, fmt, ap); break; default: zfs_error_aux(hdl, "%s", zfs_strerror(error)); zfs_verror(hdl, EZFS_UNKNOWN, fmt, ap); break; } va_end(ap); return (-1); } void zfs_setprop_error(libzfs_handle_t *hdl, zfs_prop_t prop, int err, char *errbuf) { switch (err) { case ENOSPC: /* * For quotas and reservations, ENOSPC indicates * something different; setting a quota or reservation * doesn't use any disk space. */ switch (prop) { case ZFS_PROP_QUOTA: case ZFS_PROP_REFQUOTA: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "size is less than current used or " "reserved space")); (void) zfs_error(hdl, EZFS_PROPSPACE, errbuf); break; case ZFS_PROP_RESERVATION: case ZFS_PROP_REFRESERVATION: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "size is greater than available space")); (void) zfs_error(hdl, EZFS_PROPSPACE, errbuf); break; default: (void) zfs_standard_error(hdl, err, errbuf); break; } break; case EBUSY: (void) zfs_standard_error(hdl, EBUSY, errbuf); break; case EROFS: (void) zfs_error(hdl, EZFS_DSREADONLY, errbuf); break; case E2BIG: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property value too long")); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); break; case ENOTSUP: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool and or dataset must be upgraded to set this " "property or value")); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); break; case ERANGE: if (prop == ZFS_PROP_COMPRESSION || prop == ZFS_PROP_DNODESIZE || prop == ZFS_PROP_RECORDSIZE) { (void) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property setting is not allowed on " "bootable datasets")); (void) zfs_error(hdl, EZFS_NOTSUP, errbuf); } else if (prop == ZFS_PROP_CHECKSUM || prop == ZFS_PROP_DEDUP) { (void) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property setting is not allowed on " "root pools")); (void) zfs_error(hdl, EZFS_NOTSUP, errbuf); } else { (void) zfs_standard_error(hdl, err, errbuf); } break; case EINVAL: if (prop == ZPROP_INVAL) { (void) zfs_error(hdl, EZFS_BADPROP, errbuf); } else { (void) zfs_standard_error(hdl, err, errbuf); } break; case ZFS_ERR_BADPROP: (void) zfs_error(hdl, EZFS_BADPROP, errbuf); break; case EACCES: if (prop == ZFS_PROP_KEYLOCATION) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "keylocation may only be set on encryption roots")); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); } else { (void) zfs_standard_error(hdl, err, errbuf); } break; case EOVERFLOW: /* * This platform can't address a volume this big. */ #ifdef _ILP32 if (prop == ZFS_PROP_VOLSIZE) { (void) zfs_error(hdl, EZFS_VOLTOOBIG, errbuf); break; } zfs_fallthrough; #endif default: (void) zfs_standard_error(hdl, err, errbuf); } } int zpool_standard_error(libzfs_handle_t *hdl, int error, const char *msg) { return (zpool_standard_error_fmt(hdl, error, "%s", msg)); } int zpool_standard_error_fmt(libzfs_handle_t *hdl, int error, const char *fmt, ...) { va_list ap; va_start(ap, fmt); if (zfs_common_error(hdl, error, fmt, ap) != 0) { va_end(ap); return (-1); } switch (error) { case ENODEV: zfs_verror(hdl, EZFS_NODEVICE, fmt, ap); break; case ENOENT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no such pool or dataset")); zfs_verror(hdl, EZFS_NOENT, fmt, ap); break; case EEXIST: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool already exists")); zfs_verror(hdl, EZFS_EXISTS, fmt, ap); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool is busy")); zfs_verror(hdl, EZFS_BUSY, fmt, ap); break; /* There is no pending operation to cancel */ case ENOTACTIVE: zfs_verror(hdl, EZFS_NO_PENDING, fmt, ap); break; case ENXIO: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is currently unavailable")); zfs_verror(hdl, EZFS_BADDEV, fmt, ap); break; case ENAMETOOLONG: zfs_verror(hdl, EZFS_DEVOVERFLOW, fmt, ap); break; case ENOTSUP: zfs_verror(hdl, EZFS_POOL_NOTSUP, fmt, ap); break; case EINVAL: zfs_verror(hdl, EZFS_POOL_INVALARG, fmt, ap); break; case ENOSPC: case EDQUOT: zfs_verror(hdl, EZFS_NOSPC, fmt, ap); break; case EAGAIN: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool I/O is currently suspended")); zfs_verror(hdl, EZFS_POOLUNAVAIL, fmt, ap); break; case EROFS: zfs_verror(hdl, EZFS_POOLREADONLY, fmt, ap); break; case EDOM: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "block size out of range or does not match")); zfs_verror(hdl, EZFS_BADPROP, fmt, ap); break; case EREMOTEIO: zfs_verror(hdl, EZFS_ACTIVE_POOL, fmt, ap); break; case ZFS_ERR_CHECKPOINT_EXISTS: zfs_verror(hdl, EZFS_CHECKPOINT_EXISTS, fmt, ap); break; case ZFS_ERR_DISCARDING_CHECKPOINT: zfs_verror(hdl, EZFS_DISCARDING_CHECKPOINT, fmt, ap); break; case ZFS_ERR_NO_CHECKPOINT: zfs_verror(hdl, EZFS_NO_CHECKPOINT, fmt, ap); break; case ZFS_ERR_DEVRM_IN_PROGRESS: zfs_verror(hdl, EZFS_DEVRM_IN_PROGRESS, fmt, ap); break; case ZFS_ERR_VDEV_TOO_BIG: zfs_verror(hdl, EZFS_VDEV_TOO_BIG, fmt, ap); break; case ZFS_ERR_EXPORT_IN_PROGRESS: zfs_verror(hdl, EZFS_EXPORT_IN_PROGRESS, fmt, ap); break; case ZFS_ERR_RESILVER_IN_PROGRESS: zfs_verror(hdl, EZFS_RESILVERING, fmt, ap); break; case ZFS_ERR_REBUILD_IN_PROGRESS: zfs_verror(hdl, EZFS_REBUILDING, fmt, ap); break; case ZFS_ERR_BADPROP: zfs_verror(hdl, EZFS_BADPROP, fmt, ap); break; case ZFS_ERR_VDEV_NOTSUP: zfs_verror(hdl, EZFS_VDEV_NOTSUP, fmt, ap); break; case ZFS_ERR_IOC_CMD_UNAVAIL: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs " "module does not support this operation. A reboot may " "be required to enable this operation.")); zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_IOC_ARG_UNAVAIL: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "the loaded zfs " "module does not support an option for this operation. " "A reboot may be required to enable this option.")); zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_IOC_ARG_REQUIRED: case ZFS_ERR_IOC_ARG_BADTYPE: zfs_verror(hdl, EZFS_IOC_NOTSUPPORTED, fmt, ap); break; case ZFS_ERR_RAIDZ_EXPAND_IN_PROGRESS: zfs_verror(hdl, EZFS_RAIDZ_EXPAND_IN_PROGRESS, fmt, ap); break; case ZFS_ERR_ASHIFT_MISMATCH: zfs_verror(hdl, EZFS_ASHIFT_MISMATCH, fmt, ap); break; default: zfs_error_aux(hdl, "%s", zfs_strerror(error)); zfs_verror(hdl, EZFS_UNKNOWN, fmt, ap); } va_end(ap); return (-1); } /* * Display an out of memory error message and abort the current program. */ int no_memory(libzfs_handle_t *hdl) { return (zfs_error(hdl, EZFS_NOMEM, "internal error")); } /* * A safe form of malloc() which will die if the allocation fails. */ void * zfs_alloc(libzfs_handle_t *hdl, size_t size) { void *data; if ((data = calloc(1, size)) == NULL) (void) no_memory(hdl); return (data); } /* * A safe form of asprintf() which will die if the allocation fails. */ char * zfs_asprintf(libzfs_handle_t *hdl, const char *fmt, ...) { va_list ap; char *ret; int err; va_start(ap, fmt); err = vasprintf(&ret, fmt, ap); va_end(ap); if (err < 0) { (void) no_memory(hdl); ret = NULL; } return (ret); } /* * A safe form of realloc(), which also zeroes newly allocated space. */ void * zfs_realloc(libzfs_handle_t *hdl, void *ptr, size_t oldsize, size_t newsize) { void *ret; if ((ret = realloc(ptr, newsize)) == NULL) { (void) no_memory(hdl); return (NULL); } memset((char *)ret + oldsize, 0, newsize - oldsize); return (ret); } /* * A safe form of strdup() which will die if the allocation fails. */ char * zfs_strdup(libzfs_handle_t *hdl, const char *str) { char *ret; if ((ret = strdup(str)) == NULL) (void) no_memory(hdl); return (ret); } void libzfs_print_on_error(libzfs_handle_t *hdl, boolean_t printerr) { hdl->libzfs_printerr = printerr; } /* * Read lines from an open file descriptor and store them in an array of * strings until EOF. lines[] will be allocated and populated with all the * lines read. All newlines are replaced with NULL terminators for * convenience. lines[] must be freed after use with libzfs_free_str_array(). * * Returns the number of lines read. */ static int libzfs_read_stdout_from_fd(int fd, char **lines[]) { FILE *fp; int lines_cnt = 0; size_t len = 0; char *line = NULL; char **tmp_lines = NULL, **tmp; fp = fdopen(fd, "r"); if (fp == NULL) { close(fd); return (0); } while (getline(&line, &len, fp) != -1) { tmp = realloc(tmp_lines, sizeof (*tmp_lines) * (lines_cnt + 1)); if (tmp == NULL) { /* Return the lines we were able to process */ break; } tmp_lines = tmp; /* Remove newline if not EOF */ if (line[strlen(line) - 1] == '\n') line[strlen(line) - 1] = '\0'; tmp_lines[lines_cnt] = strdup(line); if (tmp_lines[lines_cnt] == NULL) break; ++lines_cnt; } free(line); fclose(fp); *lines = tmp_lines; return (lines_cnt); } static int libzfs_run_process_impl(const char *path, char *argv[], char *env[], int flags, char **lines[], int *lines_cnt) { pid_t pid; int error, devnull_fd; int link[2]; /* * Setup a pipe between our child and parent process if we're * reading stdout. */ if (lines != NULL && pipe2(link, O_NONBLOCK | O_CLOEXEC) == -1) return (-EPIPE); pid = fork(); if (pid == 0) { /* Child process */ devnull_fd = open("/dev/null", O_WRONLY | O_CLOEXEC); if (devnull_fd < 0) _exit(-1); if (!(flags & STDOUT_VERBOSE) && (lines == NULL)) (void) dup2(devnull_fd, STDOUT_FILENO); else if (lines != NULL) { /* Save the output to lines[] */ dup2(link[1], STDOUT_FILENO); } if (!(flags & STDERR_VERBOSE)) (void) dup2(devnull_fd, STDERR_FILENO); if (flags & NO_DEFAULT_PATH) { if (env == NULL) execv(path, argv); else execve(path, argv, env); } else { if (env == NULL) execvp(path, argv); else execvpe(path, argv, env); } _exit(-1); } else if (pid > 0) { /* Parent process */ int status; while ((error = waitpid(pid, &status, 0)) == -1 && errno == EINTR) ; if (error < 0 || !WIFEXITED(status)) return (-1); if (lines != NULL) { close(link[1]); *lines_cnt = libzfs_read_stdout_from_fd(link[0], lines); } return (WEXITSTATUS(status)); } return (-1); } int libzfs_run_process(const char *path, char *argv[], int flags) { return (libzfs_run_process_impl(path, argv, NULL, flags, NULL, NULL)); } /* * Run a command and store its stdout lines in an array of strings (lines[]). * lines[] is allocated and populated for you, and the number of lines is set in * lines_cnt. lines[] must be freed after use with libzfs_free_str_array(). * All newlines (\n) in lines[] are terminated for convenience. */ int libzfs_run_process_get_stdout(const char *path, char *argv[], char *env[], char **lines[], int *lines_cnt) { return (libzfs_run_process_impl(path, argv, env, 0, lines, lines_cnt)); } /* * Same as libzfs_run_process_get_stdout(), but run without $PATH set. This * means that *path needs to be the full path to the executable. */ int libzfs_run_process_get_stdout_nopath(const char *path, char *argv[], char *env[], char **lines[], int *lines_cnt) { return (libzfs_run_process_impl(path, argv, env, NO_DEFAULT_PATH, lines, lines_cnt)); } /* * Free an array of strings. Free both the strings contained in the array and * the array itself. */ void libzfs_free_str_array(char **strs, int count) { while (--count >= 0) free(strs[count]); free(strs); } /* * Returns 1 if environment variable is set to "YES", "yes", "ON", "on", or * a non-zero number. * * Returns 0 otherwise. */ boolean_t libzfs_envvar_is_set(const char *envvar) { char *env = getenv(envvar); return (env && (strtoul(env, NULL, 0) > 0 || (!strncasecmp(env, "YES", 3) && strnlen(env, 4) == 3) || (!strncasecmp(env, "ON", 2) && strnlen(env, 3) == 2))); } libzfs_handle_t * libzfs_init(void) { libzfs_handle_t *hdl; int error; char *env; if ((error = libzfs_load_module()) != 0) { errno = error; return (NULL); } if ((hdl = calloc(1, sizeof (libzfs_handle_t))) == NULL) { return (NULL); } if (regcomp(&hdl->libzfs_urire, URI_REGEX, 0) != 0) { free(hdl); return (NULL); } if ((hdl->libzfs_fd = open(ZFS_DEV, O_RDWR|O_EXCL|O_CLOEXEC)) < 0) { free(hdl); return (NULL); } if (libzfs_core_init() != 0) { (void) close(hdl->libzfs_fd); free(hdl); return (NULL); } zfs_prop_init(); zpool_prop_init(); zpool_feature_init(); vdev_prop_init(); libzfs_mnttab_init(hdl); fletcher_4_init(); if (getenv("ZFS_PROP_DEBUG") != NULL) { hdl->libzfs_prop_debug = B_TRUE; } if ((env = getenv("ZFS_SENDRECV_MAX_NVLIST")) != NULL) { if ((error = zfs_nicestrtonum(hdl, env, &hdl->libzfs_max_nvlist))) { errno = error; (void) close(hdl->libzfs_fd); free(hdl); return (NULL); } } else { hdl->libzfs_max_nvlist = (SPA_MAXBLOCKSIZE * 4); } /* * For testing, remove some settable properties and features */ if (libzfs_envvar_is_set("ZFS_SYSFS_PROP_SUPPORT_TEST")) { zprop_desc_t *proptbl; proptbl = zpool_prop_get_table(); proptbl[ZPOOL_PROP_COMMENT].pd_zfs_mod_supported = B_FALSE; proptbl = zfs_prop_get_table(); proptbl[ZFS_PROP_DNODESIZE].pd_zfs_mod_supported = B_FALSE; zfeature_info_t *ftbl = spa_feature_table; ftbl[SPA_FEATURE_LARGE_BLOCKS].fi_zfs_mod_supported = B_FALSE; } return (hdl); } void libzfs_fini(libzfs_handle_t *hdl) { (void) close(hdl->libzfs_fd); zpool_free_handles(hdl); namespace_clear(hdl); libzfs_mnttab_fini(hdl); libzfs_core_fini(); regfree(&hdl->libzfs_urire); fletcher_4_fini(); #if LIBFETCH_DYNAMIC if (hdl->libfetch != (void *)-1 && hdl->libfetch != NULL) (void) dlclose(hdl->libfetch); free(hdl->libfetch_load_error); #endif free(hdl); } libzfs_handle_t * zpool_get_handle(zpool_handle_t *zhp) { return (zhp->zpool_hdl); } libzfs_handle_t * zfs_get_handle(zfs_handle_t *zhp) { return (zhp->zfs_hdl); } zpool_handle_t * zfs_get_pool_handle(const zfs_handle_t *zhp) { return (zhp->zpool_hdl); } /* * Given a name, determine whether or not it's a valid path * (starts with '/' or "./"). If so, walk the mnttab trying * to match the device number. If not, treat the path as an * fs/vol/snap/bkmark name. */ zfs_handle_t * zfs_path_to_zhandle(libzfs_handle_t *hdl, const char *path, zfs_type_t argtype) { struct stat64 statbuf; struct extmnttab entry; if (path[0] != '/' && strncmp(path, "./", strlen("./")) != 0) { /* * It's not a valid path, assume it's a name of type 'argtype'. */ return (zfs_open(hdl, path, argtype)); } if (getextmntent(path, &entry, &statbuf) != 0) return (NULL); if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0) { (void) fprintf(stderr, gettext("'%s': not a ZFS filesystem\n"), path); return (NULL); } return (zfs_open(hdl, entry.mnt_special, ZFS_TYPE_FILESYSTEM)); } /* * Initialize the zc_nvlist_dst member to prepare for receiving an nvlist from * an ioctl(). */ void zcmd_alloc_dst_nvlist(libzfs_handle_t *hdl, zfs_cmd_t *zc, size_t len) { if (len == 0) len = 256 * 1024; zc->zc_nvlist_dst_size = len; zc->zc_nvlist_dst = (uint64_t)(uintptr_t)zfs_alloc(hdl, zc->zc_nvlist_dst_size); } /* * Called when an ioctl() which returns an nvlist fails with ENOMEM. This will * expand the nvlist to the size specified in 'zc_nvlist_dst_size', which was * filled in by the kernel to indicate the actual required size. */ void zcmd_expand_dst_nvlist(libzfs_handle_t *hdl, zfs_cmd_t *zc) { free((void *)(uintptr_t)zc->zc_nvlist_dst); zc->zc_nvlist_dst = (uint64_t)(uintptr_t)zfs_alloc(hdl, zc->zc_nvlist_dst_size); } /* * Called to free the src and dst nvlists stored in the command structure. */ void zcmd_free_nvlists(zfs_cmd_t *zc) { free((void *)(uintptr_t)zc->zc_nvlist_conf); free((void *)(uintptr_t)zc->zc_nvlist_src); free((void *)(uintptr_t)zc->zc_nvlist_dst); zc->zc_nvlist_conf = 0; zc->zc_nvlist_src = 0; zc->zc_nvlist_dst = 0; } static void zcmd_write_nvlist_com(libzfs_handle_t *hdl, uint64_t *outnv, uint64_t *outlen, nvlist_t *nvl) { char *packed; size_t len = fnvlist_size(nvl); packed = zfs_alloc(hdl, len); verify(nvlist_pack(nvl, &packed, &len, NV_ENCODE_NATIVE, 0) == 0); *outnv = (uint64_t)(uintptr_t)packed; *outlen = len; } void zcmd_write_conf_nvlist(libzfs_handle_t *hdl, zfs_cmd_t *zc, nvlist_t *nvl) { zcmd_write_nvlist_com(hdl, &zc->zc_nvlist_conf, &zc->zc_nvlist_conf_size, nvl); } void zcmd_write_src_nvlist(libzfs_handle_t *hdl, zfs_cmd_t *zc, nvlist_t *nvl) { zcmd_write_nvlist_com(hdl, &zc->zc_nvlist_src, &zc->zc_nvlist_src_size, nvl); } /* * Unpacks an nvlist from the ZFS ioctl command structure. */ int zcmd_read_dst_nvlist(libzfs_handle_t *hdl, zfs_cmd_t *zc, nvlist_t **nvlp) { if (nvlist_unpack((void *)(uintptr_t)zc->zc_nvlist_dst, zc->zc_nvlist_dst_size, nvlp, 0) != 0) return (no_memory(hdl)); return (0); } /* * ================================================================ * API shared by zfs and zpool property management * ================================================================ */ static void zprop_print_headers(zprop_get_cbdata_t *cbp, zfs_type_t type) { zprop_list_t *pl; int i; char *title; size_t len; cbp->cb_first = B_FALSE; if (cbp->cb_scripted) return; /* * Start with the length of the column headers. */ cbp->cb_colwidths[GET_COL_NAME] = strlen(dgettext(TEXT_DOMAIN, "NAME")); cbp->cb_colwidths[GET_COL_PROPERTY] = strlen(dgettext(TEXT_DOMAIN, "PROPERTY")); cbp->cb_colwidths[GET_COL_VALUE] = strlen(dgettext(TEXT_DOMAIN, "VALUE")); cbp->cb_colwidths[GET_COL_RECVD] = strlen(dgettext(TEXT_DOMAIN, "RECEIVED")); cbp->cb_colwidths[GET_COL_SOURCE] = strlen(dgettext(TEXT_DOMAIN, "SOURCE")); /* first property is always NAME */ assert(cbp->cb_proplist->pl_prop == ((type == ZFS_TYPE_POOL) ? ZPOOL_PROP_NAME : ((type == ZFS_TYPE_VDEV) ? VDEV_PROP_NAME : ZFS_PROP_NAME))); /* * Go through and calculate the widths for each column. For the * 'source' column, we kludge it up by taking the worst-case scenario of * inheriting from the longest name. This is acceptable because in the * majority of cases 'SOURCE' is the last column displayed, and we don't * use the width anyway. Note that the 'VALUE' column can be oversized, * if the name of the property is much longer than any values we find. */ for (pl = cbp->cb_proplist; pl != NULL; pl = pl->pl_next) { /* * 'PROPERTY' column */ if (pl->pl_prop != ZPROP_USERPROP) { const char *propname = (type == ZFS_TYPE_POOL) ? zpool_prop_to_name(pl->pl_prop) : ((type == ZFS_TYPE_VDEV) ? vdev_prop_to_name(pl->pl_prop) : zfs_prop_to_name(pl->pl_prop)); assert(propname != NULL); len = strlen(propname); if (len > cbp->cb_colwidths[GET_COL_PROPERTY]) cbp->cb_colwidths[GET_COL_PROPERTY] = len; } else { assert(pl->pl_user_prop != NULL); len = strlen(pl->pl_user_prop); if (len > cbp->cb_colwidths[GET_COL_PROPERTY]) cbp->cb_colwidths[GET_COL_PROPERTY] = len; } /* * 'VALUE' column. The first property is always the 'name' * property that was tacked on either by /sbin/zfs's * zfs_do_get() or when calling zprop_expand_list(), so we * ignore its width. If the user specified the name property * to display, then it will be later in the list in any case. */ if (pl != cbp->cb_proplist && pl->pl_width > cbp->cb_colwidths[GET_COL_VALUE]) cbp->cb_colwidths[GET_COL_VALUE] = pl->pl_width; /* 'RECEIVED' column. */ if (pl != cbp->cb_proplist && pl->pl_recvd_width > cbp->cb_colwidths[GET_COL_RECVD]) cbp->cb_colwidths[GET_COL_RECVD] = pl->pl_recvd_width; /* * 'NAME' and 'SOURCE' columns */ if (pl->pl_prop == ((type == ZFS_TYPE_POOL) ? ZPOOL_PROP_NAME : ((type == ZFS_TYPE_VDEV) ? VDEV_PROP_NAME : ZFS_PROP_NAME)) && pl->pl_width > cbp->cb_colwidths[GET_COL_NAME]) { cbp->cb_colwidths[GET_COL_NAME] = pl->pl_width; cbp->cb_colwidths[GET_COL_SOURCE] = pl->pl_width + strlen(dgettext(TEXT_DOMAIN, "inherited from")); } } /* * Now go through and print the headers. */ for (i = 0; i < ZFS_GET_NCOLS; i++) { switch (cbp->cb_columns[i]) { case GET_COL_NAME: title = dgettext(TEXT_DOMAIN, "NAME"); break; case GET_COL_PROPERTY: title = dgettext(TEXT_DOMAIN, "PROPERTY"); break; case GET_COL_VALUE: title = dgettext(TEXT_DOMAIN, "VALUE"); break; case GET_COL_RECVD: title = dgettext(TEXT_DOMAIN, "RECEIVED"); break; case GET_COL_SOURCE: title = dgettext(TEXT_DOMAIN, "SOURCE"); break; default: title = NULL; } if (title != NULL) { if (i == (ZFS_GET_NCOLS - 1) || cbp->cb_columns[i + 1] == GET_COL_NONE) (void) printf("%s", title); else (void) printf("%-*s ", cbp->cb_colwidths[cbp->cb_columns[i]], title); } } (void) printf("\n"); } /* * Display a single line of output, according to the settings in the callback * structure. */ void zprop_print_one_property(const char *name, zprop_get_cbdata_t *cbp, const char *propname, const char *value, zprop_source_t sourcetype, const char *source, const char *recvd_value) { int i; const char *str = NULL; char buf[128]; /* * Ignore those source types that the user has chosen to ignore. */ if ((sourcetype & cbp->cb_sources) == 0) return; if (cbp->cb_first) zprop_print_headers(cbp, cbp->cb_type); for (i = 0; i < ZFS_GET_NCOLS; i++) { switch (cbp->cb_columns[i]) { case GET_COL_NAME: str = name; break; case GET_COL_PROPERTY: str = propname; break; case GET_COL_VALUE: str = value; break; case GET_COL_SOURCE: switch (sourcetype) { case ZPROP_SRC_NONE: str = "-"; break; case ZPROP_SRC_DEFAULT: str = "default"; break; case ZPROP_SRC_LOCAL: str = "local"; break; case ZPROP_SRC_TEMPORARY: str = "temporary"; break; case ZPROP_SRC_INHERITED: (void) snprintf(buf, sizeof (buf), "inherited from %s", source); str = buf; break; case ZPROP_SRC_RECEIVED: str = "received"; break; default: str = NULL; assert(!"unhandled zprop_source_t"); } break; case GET_COL_RECVD: str = (recvd_value == NULL ? "-" : recvd_value); break; default: continue; } if (i == (ZFS_GET_NCOLS - 1) || cbp->cb_columns[i + 1] == GET_COL_NONE) (void) printf("%s", str); else if (cbp->cb_scripted) (void) printf("%s\t", str); else (void) printf("%-*s ", cbp->cb_colwidths[cbp->cb_columns[i]], str); } (void) printf("\n"); } /* * Given a numeric suffix, convert the value into a number of bits that the * resulting value must be shifted. */ static int str2shift(libzfs_handle_t *hdl, const char *buf) { const char *ends = "BKMGTPEZ"; int i; if (buf[0] == '\0') return (0); for (i = 0; i < strlen(ends); i++) { if (toupper(buf[0]) == ends[i]) break; } if (i == strlen(ends)) { if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid numeric suffix '%s'"), buf); return (-1); } /* * Allow 'G' = 'GB' = 'GiB', case-insensitively. * However, 'BB' and 'BiB' are disallowed. */ if (buf[1] == '\0' || (toupper(buf[0]) != 'B' && ((toupper(buf[1]) == 'B' && buf[2] == '\0') || (toupper(buf[1]) == 'I' && toupper(buf[2]) == 'B' && buf[3] == '\0')))) return (10 * i); if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid numeric suffix '%s'"), buf); return (-1); } /* * Convert a string of the form '100G' into a real number. Used when setting * properties or creating a volume. 'buf' is used to place an extended error * message for the caller to use. */ int zfs_nicestrtonum(libzfs_handle_t *hdl, const char *value, uint64_t *num) { char *end; int shift; *num = 0; /* Check to see if this looks like a number. */ if ((value[0] < '0' || value[0] > '9') && value[0] != '.') { if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "bad numeric value '%s'"), value); return (-1); } /* Rely on strtoull() to process the numeric portion. */ errno = 0; *num = strtoull(value, &end, 10); /* * Check for ERANGE, which indicates that the value is too large to fit * in a 64-bit value. */ if (errno == ERANGE) { if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "numeric value is too large")); return (-1); } /* * If we have a decimal value, then do the computation with floating * point arithmetic. Otherwise, use standard arithmetic. */ if (*end == '.') { double fval = strtod(value, &end); if ((shift = str2shift(hdl, end)) == -1) return (-1); fval *= pow(2, shift); /* * UINT64_MAX is not exactly representable as a double. * The closest representation is UINT64_MAX + 1, so we * use a >= comparison instead of > for the bounds check. */ if (fval >= (double)UINT64_MAX) { if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "numeric value is too large")); return (-1); } *num = (uint64_t)fval; } else { if ((shift = str2shift(hdl, end)) == -1) return (-1); /* Check for overflow */ if (shift >= 64 || (*num << shift) >> shift != *num) { if (hdl) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "numeric value is too large")); return (-1); } *num <<= shift; } return (0); } /* * Given a propname=value nvpair to set, parse any numeric properties * (index, boolean, etc) if they are specified as strings and add the * resulting nvpair to the returned nvlist. * * At the DSL layer, all properties are either 64-bit numbers or strings. * We want the user to be able to ignore this fact and specify properties * as native values (numbers, for example) or as strings (to simplify * command line utilities). This also handles converting index types * (compression, checksum, etc) from strings to their on-disk index. */ int zprop_parse_value(libzfs_handle_t *hdl, nvpair_t *elem, int prop, zfs_type_t type, nvlist_t *ret, const char **svalp, uint64_t *ivalp, const char *errbuf) { data_type_t datatype = nvpair_type(elem); zprop_type_t proptype; const char *propname; const char *value; boolean_t isnone = B_FALSE; boolean_t isauto = B_FALSE; int err = 0; if (type == ZFS_TYPE_POOL) { proptype = zpool_prop_get_type(prop); propname = zpool_prop_to_name(prop); } else if (type == ZFS_TYPE_VDEV) { proptype = vdev_prop_get_type(prop); propname = vdev_prop_to_name(prop); } else { proptype = zfs_prop_get_type(prop); propname = zfs_prop_to_name(prop); } /* * Convert any properties to the internal DSL value types. */ *svalp = NULL; *ivalp = 0; switch (proptype) { case PROP_TYPE_STRING: if (datatype != DATA_TYPE_STRING) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be a string"), nvpair_name(elem)); goto error; } err = nvpair_value_string(elem, svalp); if (err != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is invalid"), nvpair_name(elem)); goto error; } if (strlen(*svalp) >= ZFS_MAXPROPLEN) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is too long"), nvpair_name(elem)); goto error; } break; case PROP_TYPE_NUMBER: if (datatype == DATA_TYPE_STRING) { (void) nvpair_value_string(elem, &value); if (strcmp(value, "none") == 0) { isnone = B_TRUE; } else if (strcmp(value, "auto") == 0) { isauto = B_TRUE; } else if (zfs_nicestrtonum(hdl, value, ivalp) != 0) { goto error; } } else if (datatype == DATA_TYPE_UINT64) { (void) nvpair_value_uint64(elem, ivalp); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be a number"), nvpair_name(elem)); goto error; } /* * Quota special: force 'none' and don't allow 0. */ if ((type & ZFS_TYPE_DATASET) && *ivalp == 0 && !isnone && (prop == ZFS_PROP_QUOTA || prop == ZFS_PROP_REFQUOTA)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "use 'none' to disable quota/refquota")); goto error; } + /* + * Pool dedup table quota; force use of 'none' instead of 0 + */ + if ((type & ZFS_TYPE_POOL) && *ivalp == 0 && + (!isnone && !isauto) && + prop == ZPOOL_PROP_DEDUP_TABLE_QUOTA) { + zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, + "use 'none' to disable ddt table quota")); + goto error; + } /* * Special handling for "*_limit=none". In this case it's not * 0 but UINT64_MAX. */ if ((type & ZFS_TYPE_DATASET) && isnone && (prop == ZFS_PROP_FILESYSTEM_LIMIT || prop == ZFS_PROP_SNAPSHOT_LIMIT)) { *ivalp = UINT64_MAX; } /* * Special handling for "checksum_*=none". In this case it's not * 0 but UINT64_MAX. */ if ((type & ZFS_TYPE_VDEV) && isnone && (prop == VDEV_PROP_CHECKSUM_N || prop == VDEV_PROP_CHECKSUM_T || prop == VDEV_PROP_IO_N || prop == VDEV_PROP_IO_T || prop == VDEV_PROP_SLOW_IO_N || prop == VDEV_PROP_SLOW_IO_T)) { *ivalp = UINT64_MAX; } /* * Special handling for setting 'refreservation' to 'auto'. Use * UINT64_MAX to tell the caller to use zfs_fix_auto_resv(). * 'auto' is only allowed on volumes. */ if (isauto) { switch (prop) { case ZFS_PROP_REFRESERVATION: if ((type & ZFS_TYPE_VOLUME) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s=auto' only allowed on " "volumes"), nvpair_name(elem)); goto error; } *ivalp = UINT64_MAX; break; + case ZPOOL_PROP_DEDUP_TABLE_QUOTA: + ASSERT(type & ZFS_TYPE_POOL); + *ivalp = UINT64_MAX; + break; default: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'auto' is invalid value for '%s'"), nvpair_name(elem)); goto error; } } break; case PROP_TYPE_INDEX: if (datatype != DATA_TYPE_STRING) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be a string"), nvpair_name(elem)); goto error; } (void) nvpair_value_string(elem, &value); if (zprop_string_to_index(prop, value, ivalp, type) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' must be one of '%s'"), propname, zprop_values(prop, type)); goto error; } break; default: abort(); } /* * Add the result to our return set of properties. */ if (*svalp != NULL) { if (nvlist_add_string(ret, propname, *svalp) != 0) { (void) no_memory(hdl); return (-1); } } else { if (nvlist_add_uint64(ret, propname, *ivalp) != 0) { (void) no_memory(hdl); return (-1); } } return (0); error: (void) zfs_error(hdl, EZFS_BADPROP, errbuf); return (-1); } static int addlist(libzfs_handle_t *hdl, const char *propname, zprop_list_t **listp, zfs_type_t type) { int prop = zprop_name_to_prop(propname, type); if (prop != ZPROP_INVAL && !zprop_valid_for_type(prop, type, B_FALSE)) prop = ZPROP_INVAL; /* * Return failure if no property table entry was found and this isn't * a user-defined property. */ if (prop == ZPROP_USERPROP && ((type == ZFS_TYPE_POOL && !zfs_prop_user(propname) && !zpool_prop_feature(propname) && !zpool_prop_unsupported(propname)) || ((type == ZFS_TYPE_DATASET) && !zfs_prop_user(propname) && !zfs_prop_userquota(propname) && !zfs_prop_written(propname)) || ((type == ZFS_TYPE_VDEV) && !vdev_prop_user(propname)))) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid property '%s'"), propname); return (zfs_error(hdl, EZFS_BADPROP, dgettext(TEXT_DOMAIN, "bad property list"))); } zprop_list_t *entry = zfs_alloc(hdl, sizeof (*entry)); entry->pl_prop = prop; if (prop == ZPROP_USERPROP) { entry->pl_user_prop = zfs_strdup(hdl, propname); entry->pl_width = strlen(propname); } else { entry->pl_width = zprop_width(prop, &entry->pl_fixed, type); } *listp = entry; return (0); } /* * Given a comma-separated list of properties, construct a property list * containing both user-defined and native properties. This function will * return a NULL list if 'all' is specified, which can later be expanded * by zprop_expand_list(). */ int zprop_get_list(libzfs_handle_t *hdl, char *props, zprop_list_t **listp, zfs_type_t type) { *listp = NULL; /* * If 'all' is specified, return a NULL list. */ if (strcmp(props, "all") == 0) return (0); /* * If no props were specified, return an error. */ if (props[0] == '\0') { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no properties specified")); return (zfs_error(hdl, EZFS_BADPROP, dgettext(TEXT_DOMAIN, "bad property list"))); } for (char *p; (p = strsep(&props, ",")); ) if (strcmp(p, "space") == 0) { static const char *const spaceprops[] = { "name", "avail", "used", "usedbysnapshots", "usedbydataset", "usedbyrefreservation", "usedbychildren" }; for (int i = 0; i < ARRAY_SIZE(spaceprops); i++) { if (addlist(hdl, spaceprops[i], listp, type)) return (-1); listp = &(*listp)->pl_next; } } else { if (addlist(hdl, p, listp, type)) return (-1); listp = &(*listp)->pl_next; } return (0); } void zprop_free_list(zprop_list_t *pl) { zprop_list_t *next; while (pl != NULL) { next = pl->pl_next; free(pl->pl_user_prop); free(pl); pl = next; } } typedef struct expand_data { zprop_list_t **last; libzfs_handle_t *hdl; zfs_type_t type; } expand_data_t; static int zprop_expand_list_cb(int prop, void *cb) { zprop_list_t *entry; expand_data_t *edp = cb; entry = zfs_alloc(edp->hdl, sizeof (zprop_list_t)); entry->pl_prop = prop; entry->pl_width = zprop_width(prop, &entry->pl_fixed, edp->type); entry->pl_all = B_TRUE; *(edp->last) = entry; edp->last = &entry->pl_next; return (ZPROP_CONT); } int zprop_expand_list(libzfs_handle_t *hdl, zprop_list_t **plp, zfs_type_t type) { zprop_list_t *entry; zprop_list_t **last; expand_data_t exp; if (*plp == NULL) { /* * If this is the very first time we've been called for an 'all' * specification, expand the list to include all native * properties. */ last = plp; exp.last = last; exp.hdl = hdl; exp.type = type; if (zprop_iter_common(zprop_expand_list_cb, &exp, B_FALSE, B_FALSE, type) == ZPROP_INVAL) return (-1); /* * Add 'name' to the beginning of the list, which is handled * specially. */ entry = zfs_alloc(hdl, sizeof (zprop_list_t)); entry->pl_prop = ((type == ZFS_TYPE_POOL) ? ZPOOL_PROP_NAME : ((type == ZFS_TYPE_VDEV) ? VDEV_PROP_NAME : ZFS_PROP_NAME)); entry->pl_width = zprop_width(entry->pl_prop, &entry->pl_fixed, type); entry->pl_all = B_TRUE; entry->pl_next = *plp; *plp = entry; } return (0); } int zprop_iter(zprop_func func, void *cb, boolean_t show_all, boolean_t ordered, zfs_type_t type) { return (zprop_iter_common(func, cb, show_all, ordered, type)); } const char * zfs_version_userland(void) { return (ZFS_META_ALIAS); } /* * Prints both zfs userland and kernel versions * Returns 0 on success, and -1 on error */ int zfs_version_print(void) { (void) puts(ZFS_META_ALIAS); char *kver = zfs_version_kernel(); if (kver == NULL) { fprintf(stderr, "zfs_version_kernel() failed: %s\n", zfs_strerror(errno)); return (-1); } (void) printf("zfs-kmod-%s\n", kver); free(kver); return (0); } /* * Return 1 if the user requested ANSI color output, and our terminal supports * it. Return 0 for no color. */ int use_color(void) { static int use_color = -1; char *term; /* * Optimization: * * For each zpool invocation, we do a single check to see if we should * be using color or not, and cache that value for the lifetime of the * the zpool command. That makes it cheap to call use_color() when * we're printing with color. We assume that the settings are not going * to change during the invocation of a zpool command (the user isn't * going to change the ZFS_COLOR value while zpool is running, for * example). */ if (use_color != -1) { /* * We've already figured out if we should be using color or * not. Return the cached value. */ return (use_color); } term = getenv("TERM"); /* * The user sets the ZFS_COLOR env var set to enable zpool ANSI color * output. However if NO_COLOR is set (https://no-color.org/) then * don't use it. Also, don't use color if terminal doesn't support * it. */ if (libzfs_envvar_is_set("ZFS_COLOR") && !libzfs_envvar_is_set("NO_COLOR") && isatty(STDOUT_FILENO) && term && strcmp("dumb", term) != 0 && strcmp("unknown", term) != 0) { /* Color supported */ use_color = 1; } else { use_color = 0; } return (use_color); } /* * The functions color_start() and color_end() are used for when you want * to colorize a block of text. * * For example: * color_start(ANSI_RED) * printf("hello"); * printf("world"); * color_end(); */ void color_start(const char *color) { if (color && use_color()) { fputs(color, stdout); fflush(stdout); } } void color_end(void) { if (use_color()) { fputs(ANSI_RESET, stdout); fflush(stdout); } } /* * printf() with a color. If color is NULL, then do a normal printf. */ int printf_color(const char *color, const char *format, ...) { va_list aptr; int rc; if (color) color_start(color); va_start(aptr, format); rc = vprintf(format, aptr); va_end(aptr); if (color) color_end(); return (rc); } /* PATH + 5 env vars + a NULL entry = 7 */ #define ZPOOL_VDEV_SCRIPT_ENV_COUNT 7 /* * There's a few places where ZFS will call external scripts (like the script * in zpool.d/ and `zfs_prepare_disk`). These scripts are called with a * reduced $PATH, and some vdev specific environment vars set. This function * will allocate an populate the environment variable array that is passed to * these scripts. The user must free the arrays with zpool_vdev_free_env() when * they are done. * * The following env vars will be set (but value could be blank): * * POOL_NAME * VDEV_PATH * VDEV_UPATH * VDEV_ENC_SYSFS_PATH * * In addition, you can set an optional environment variable named 'opt_key' * to 'opt_val' if you want. * * Returns allocated env[] array on success, NULL otherwise. */ char ** zpool_vdev_script_alloc_env(const char *pool_name, const char *vdev_path, const char *vdev_upath, const char *vdev_enc_sysfs_path, const char *opt_key, const char *opt_val) { char **env = NULL; int rc; env = calloc(ZPOOL_VDEV_SCRIPT_ENV_COUNT, sizeof (*env)); if (!env) return (NULL); env[0] = strdup("PATH=/bin:/sbin:/usr/bin:/usr/sbin"); if (!env[0]) goto error; /* Setup our custom environment variables */ rc = asprintf(&env[1], "POOL_NAME=%s", pool_name ? pool_name : ""); if (rc == -1) { env[1] = NULL; goto error; } rc = asprintf(&env[2], "VDEV_PATH=%s", vdev_path ? vdev_path : ""); if (rc == -1) { env[2] = NULL; goto error; } rc = asprintf(&env[3], "VDEV_UPATH=%s", vdev_upath ? vdev_upath : ""); if (rc == -1) { env[3] = NULL; goto error; } rc = asprintf(&env[4], "VDEV_ENC_SYSFS_PATH=%s", vdev_enc_sysfs_path ? vdev_enc_sysfs_path : ""); if (rc == -1) { env[4] = NULL; goto error; } if (opt_key != NULL) { rc = asprintf(&env[5], "%s=%s", opt_key, opt_val ? opt_val : ""); if (rc == -1) { env[5] = NULL; goto error; } } return (env); error: for (int i = 0; i < ZPOOL_VDEV_SCRIPT_ENV_COUNT; i++) free(env[i]); free(env); return (NULL); } /* * Free the env[] array that was allocated by zpool_vdev_script_alloc_env(). */ void zpool_vdev_script_free_env(char **env) { for (int i = 0; i < ZPOOL_VDEV_SCRIPT_ENV_COUNT; i++) free(env[i]); free(env); } /* * Prepare a disk by (optionally) running a program before labeling the disk. * This can be useful for installing disk firmware or doing some pre-flight * checks on the disk before it becomes part of the pool. The program run is * located at ZFSEXECDIR/zfs_prepare_disk * (E.x: /usr/local/libexec/zfs/zfs_prepare_disk). * * Return 0 on success, non-zero on failure. */ int zpool_prepare_disk(zpool_handle_t *zhp, nvlist_t *vdev_nv, const char *prepare_str, char **lines[], int *lines_cnt) { const char *script_path = ZFSEXECDIR "/zfs_prepare_disk"; const char *pool_name; int rc = 0; /* Path to script and a NULL entry */ char *argv[2] = {(char *)script_path}; char **env = NULL; const char *path = NULL, *enc_sysfs_path = NULL; char *upath; *lines_cnt = 0; if (access(script_path, X_OK) != 0) { /* No script, nothing to do */ return (0); } (void) nvlist_lookup_string(vdev_nv, ZPOOL_CONFIG_PATH, &path); (void) nvlist_lookup_string(vdev_nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, &enc_sysfs_path); upath = zfs_get_underlying_path(path); pool_name = zhp ? zpool_get_name(zhp) : NULL; env = zpool_vdev_script_alloc_env(pool_name, path, upath, enc_sysfs_path, "VDEV_PREPARE", prepare_str); free(upath); if (env == NULL) { return (ENOMEM); } rc = libzfs_run_process_get_stdout(script_path, argv, env, lines, lines_cnt); zpool_vdev_script_free_env(env); return (rc); } /* * Optionally run a script and then label a disk. The script can be used to * prepare a disk for inclusion into the pool. For example, it might update * the disk's firmware or check its health. * * The 'name' provided is the short name, stripped of any leading * /dev path, and is passed to zpool_label_disk. vdev_nv is the nvlist for * the vdev. prepare_str is a string that gets passed as the VDEV_PREPARE * env variable to the script. * * The following env vars are passed to the script: * * POOL_NAME: The pool name (blank during zpool create) * VDEV_PREPARE: Reason why the disk is being prepared for inclusion: * "create", "add", "replace", or "autoreplace" * VDEV_PATH: Path to the disk * VDEV_UPATH: One of the 'underlying paths' to the disk. This is * useful for DM devices. * VDEV_ENC_SYSFS_PATH: Path to the disk's enclosure sysfs path, if available. * * Note, some of these values can be blank. * * Return 0 on success, non-zero otherwise. */ int zpool_prepare_and_label_disk(libzfs_handle_t *hdl, zpool_handle_t *zhp, const char *name, nvlist_t *vdev_nv, const char *prepare_str, char **lines[], int *lines_cnt) { int rc; char vdev_path[MAXPATHLEN]; (void) snprintf(vdev_path, sizeof (vdev_path), "%s/%s", DISK_ROOT, name); /* zhp will be NULL when creating a pool */ rc = zpool_prepare_disk(zhp, vdev_nv, prepare_str, lines, lines_cnt); if (rc != 0) return (rc); rc = zpool_label_disk(hdl, zhp, name); return (rc); } diff --git a/man/man7/zpoolprops.7 b/man/man7/zpoolprops.7 index 5428ab8d3076..ff21e5300ce7 100644 --- a/man/man7/zpoolprops.7 +++ b/man/man7/zpoolprops.7 @@ -1,486 +1,509 @@ .\" .\" CDDL HEADER START .\" .\" The contents of this file are subject to the terms of the .\" Common Development and Distribution License (the "License"). .\" You may not use this file except in compliance with the License. .\" .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE .\" or https://opensource.org/licenses/CDDL-1.0. .\" See the License for the specific language governing permissions .\" and limitations under the License. .\" .\" When distributing Covered Code, include this CDDL HEADER in each .\" file and include the License file at usr/src/OPENSOLARIS.LICENSE. .\" If applicable, add the following below this CDDL HEADER, with the .\" fields enclosed by brackets "[]" replaced with your own identifying .\" information: Portions Copyright [yyyy] [name of copyright owner] .\" .\" CDDL HEADER END .\" .\" Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved. .\" Copyright (c) 2012, 2018 by Delphix. All rights reserved. .\" Copyright (c) 2012 Cyril Plisko. All Rights Reserved. .\" Copyright (c) 2017 Datto Inc. .\" Copyright (c) 2018 George Melikov. All Rights Reserved. .\" Copyright 2017 Nexenta Systems, Inc. .\" Copyright (c) 2017 Open-E, Inc. All Rights Reserved. .\" Copyright (c) 2021, Colm Buckley .\" Copyright (c) 2023, Klara Inc. .\" -.Dd January 2, 2024 +.Dd January 14, 2024 .Dt ZPOOLPROPS 7 .Os . .Sh NAME .Nm zpoolprops .Nd properties of ZFS storage pools . .Sh DESCRIPTION Each pool has several properties associated with it. Some properties are read-only statistics while others are configurable and change the behavior of the pool. .Pp User properties have no effect on ZFS behavior. Use them to annotate pools in a way that is meaningful in your environment. For more information about user properties, see the .Sx User Properties section. .Pp The following are read-only properties: .Bl -tag -width "unsupported@guid" .It Sy allocated Amount of storage used within the pool. See .Sy fragmentation and .Sy free for more information. .It Sy bcloneratio The ratio of the total amount of storage that would be required to store all the cloned blocks without cloning to the actual storage used. The .Sy bcloneratio property is calculated as: .Pp .Sy ( ( bclonesaved + bcloneused ) * 100 ) / bcloneused .It Sy bclonesaved The amount of additional storage that would be required if block cloning was not used. .It Sy bcloneused The amount of storage used by cloned blocks. .It Sy capacity Percentage of pool space used. This property can also be referred to by its shortened column name, .Sy cap . +.It Sy dedup_table_size +Total on-disk size of the deduplication table. .It Sy expandsize Amount of uninitialized space within the pool or device that can be used to increase the total capacity of the pool. On whole-disk vdevs, this is the space beyond the end of the GPT – typically occurring when a LUN is dynamically expanded or a disk replaced with a larger one. On partition vdevs, this is the space appended to the partition after it was added to the pool – most likely by resizing it in-place. The space can be claimed for the pool by bringing it online with .Sy autoexpand=on or using .Nm zpool Cm online Fl e . .It Sy fragmentation The amount of fragmentation in the pool. As the amount of space .Sy allocated increases, it becomes more difficult to locate .Sy free space. This may result in lower write performance compared to pools with more unfragmented free space. .It Sy free The amount of free space available in the pool. By contrast, the .Xr zfs 8 .Sy available property describes how much new data can be written to ZFS filesystems/volumes. The zpool .Sy free property is not generally useful for this purpose, and can be substantially more than the zfs .Sy available space. This discrepancy is due to several factors, including raidz parity; zfs reservation, quota, refreservation, and refquota properties; and space set aside by .Sy spa_slop_shift (see .Xr zfs 4 for more information). .It Sy freeing After a file system or snapshot is destroyed, the space it was using is returned to the pool asynchronously. .Sy freeing is the amount of space remaining to be reclaimed. Over time .Sy freeing will decrease while .Sy free increases. .It Sy guid A unique identifier for the pool. .It Sy health The current health of the pool. Health can be one of .Sy ONLINE , DEGRADED , FAULTED , OFFLINE, REMOVED , UNAVAIL . .It Sy leaked Space not released while .Sy freeing due to corruption, now permanently leaked into the pool. .It Sy load_guid A unique identifier for the pool. Unlike the .Sy guid property, this identifier is generated every time we load the pool (i.e. does not persist across imports/exports) and never changes while the pool is loaded (even if a .Sy reguid operation takes place). .It Sy size Total size of the storage pool. .It Sy unsupported@ Ns Em guid Information about unsupported features that are enabled on the pool. See .Xr zpool-features 7 for details. .El .Pp The space usage properties report actual physical space available to the storage pool. The physical space can be different from the total amount of space that any contained datasets can actually use. The amount of space used in a raidz configuration depends on the characteristics of the data being written. In addition, ZFS reserves some space for internal accounting that the .Xr zfs 8 command takes into account, but the .Nm command does not. For non-full pools of a reasonable size, these effects should be invisible. For small pools, or pools that are close to being completely full, these discrepancies may become more noticeable. .Pp The following property can be set at creation time and import time: .Bl -tag -width Ds .It Sy altroot Alternate root directory. If set, this directory is prepended to any mount points within the pool. This can be used when examining an unknown pool where the mount points cannot be trusted, or in an alternate boot environment, where the typical paths are not valid. .Sy altroot is not a persistent property. It is valid only while the system is up. Setting .Sy altroot defaults to using .Sy cachefile Ns = Ns Sy none , though this may be overridden using an explicit setting. .El .Pp The following property can be set only at import time: .Bl -tag -width Ds .It Sy readonly Ns = Ns Sy on Ns | Ns Sy off If set to .Sy on , the pool will be imported in read-only mode. This property can also be referred to by its shortened column name, .Sy rdonly . .El .Pp The following properties can be set at creation time and import time, and later changed with the .Nm zpool Cm set command: .Bl -tag -width Ds .It Sy ashift Ns = Ns Ar ashift Pool sector size exponent, to the power of .Sy 2 (internally referred to as .Sy ashift ) . Values from 9 to 16, inclusive, are valid; also, the value 0 (the default) means to auto-detect using the kernel's block layer and a ZFS internal exception list. I/O operations will be aligned to the specified size boundaries. Additionally, the minimum (disk) write size will be set to the specified size, so this represents a space/performance trade-off. For optimal performance, the pool sector size should be greater than or equal to the sector size of the underlying disks. The typical case for setting this property is when performance is important and the underlying disks use 4KiB sectors but report 512B sectors to the OS (for compatibility reasons); in that case, set .Sy ashift Ns = Ns Sy 12 (which is .Sy 1<<12 No = Sy 4096 ) . When set, this property is used as the default hint value in subsequent vdev operations (add, attach and replace). Changing this value will not modify any existing vdev, not even on disk replacement; however it can be used, for instance, to replace a dying 512B sectors disk with a newer 4KiB sectors device: this will probably result in bad performance but at the same time could prevent loss of data. .It Sy autoexpand Ns = Ns Sy on Ns | Ns Sy off Controls automatic pool expansion when the underlying LUN is grown. If set to .Sy on , the pool will be resized according to the size of the expanded device. If the device is part of a mirror or raidz then all devices within that mirror/raidz group must be expanded before the new space is made available to the pool. The default behavior is .Sy off . This property can also be referred to by its shortened column name, .Sy expand . .It Sy autoreplace Ns = Ns Sy on Ns | Ns Sy off Controls automatic device replacement. If set to .Sy off , device replacement must be initiated by the administrator by using the .Nm zpool Cm replace command. If set to .Sy on , any new device, found in the same physical location as a device that previously belonged to the pool, is automatically formatted and replaced. The default behavior is .Sy off . This property can also be referred to by its shortened column name, .Sy replace . Autoreplace can also be used with virtual disks (like device mapper) provided that you use the /dev/disk/by-vdev paths setup by vdev_id.conf. See the .Xr vdev_id 8 manual page for more details. Autoreplace and autoonline require the ZFS Event Daemon be configured and running. See the .Xr zed 8 manual page for more details. .It Sy autotrim Ns = Ns Sy on Ns | Ns Sy off When set to .Sy on space which has been recently freed, and is no longer allocated by the pool, will be periodically trimmed. This allows block device vdevs which support BLKDISCARD, such as SSDs, or file vdevs on which the underlying file system supports hole-punching, to reclaim unused blocks. The default value for this property is .Sy off . .Pp Automatic TRIM does not immediately reclaim blocks after a free. Instead, it will optimistically delay allowing smaller ranges to be aggregated into a few larger ones. These can then be issued more efficiently to the storage. TRIM on L2ARC devices is enabled by setting .Sy l2arc_trim_ahead > 0 . .Pp Be aware that automatic trimming of recently freed data blocks can put significant stress on the underlying storage devices. This will vary depending of how well the specific device handles these commands. For lower-end devices it is often possible to achieve most of the benefits of automatic trimming by running an on-demand (manual) TRIM periodically using the .Nm zpool Cm trim command. .It Sy bootfs Ns = Ns Sy (unset) Ns | Ns Ar pool Ns Op / Ns Ar dataset Identifies the default bootable dataset for the root pool. This property is expected to be set mainly by the installation and upgrade programs. Not all Linux distribution boot processes use the bootfs property. .It Sy cachefile Ns = Ns Ar path Ns | Ns Sy none Controls the location of where the pool configuration is cached. Discovering all pools on system startup requires a cached copy of the configuration data that is stored on the root file system. All pools in this cache are automatically imported when the system boots. Some environments, such as install and clustering, need to cache this information in a different location so that pools are not automatically imported. Setting this property caches the pool configuration in a different location that can later be imported with .Nm zpool Cm import Fl c . Setting it to the value .Sy none creates a temporary pool that is never cached, and the .Qq .Pq empty string uses the default location. .Pp Multiple pools can share the same cache file. Because the kernel destroys and recreates this file when pools are added and removed, care should be taken when attempting to access this file. When the last pool using a .Sy cachefile is exported or destroyed, the file will be empty. .It Sy comment Ns = Ns Ar text A text string consisting of printable ASCII characters that will be stored such that it is available even if the pool becomes faulted. An administrator can provide additional information about a pool using this property. .It Sy compatibility Ns = Ns Sy off Ns | Ns Sy legacy Ns | Ns Ar file Ns Oo , Ns Ar file Oc Ns … Specifies that the pool maintain compatibility with specific feature sets. When set to .Sy off (or unset) compatibility is disabled (all features may be enabled); when set to .Sy legacy no features may be enabled. When set to a comma-separated list of filenames (each filename may either be an absolute path, or relative to .Pa /etc/zfs/compatibility.d or .Pa /usr/share/zfs/compatibility.d ) the lists of requested features are read from those files, separated by whitespace and/or commas. Only features present in all files may be enabled. .Pp See .Xr zpool-features 7 , .Xr zpool-create 8 and .Xr zpool-upgrade 8 for more information on the operation of compatibility feature sets. +.It Sy dedup_table_quota Ns = Ns Ar number Ns | Ns Sy none Ns | Ns Sy auto +This property sets a limit on the on-disk size of the pool's dedup table. +Entries will not be added to the dedup table once this size is reached; +if a dedup table already exists, and is larger than this size, they +will not be removed as part of setting this property. +Existing entries will still have their reference counts updated. +.Pp +The actual size limit of the table may be above or below the quota, +depending on the actual on-disk size of the entries (which may be +approximated for purposes of calculating the quota). +That is, setting a quota size of 1M may result in the maximum size being +slightly below, or slightly above, that value. +Set to +.Sy 'none' +to disable. +In automatic mode, which is the default, the size of a dedicated dedup vdev +is used as the quota limit. +.Pp +The +.Sy dedup_table_quota +property works for both legacy and fast dedup tables. .It Sy dedupditto Ns = Ns Ar number This property is deprecated and no longer has any effect. .It Sy delegation Ns = Ns Sy on Ns | Ns Sy off Controls whether a non-privileged user is granted access based on the dataset permissions defined on the dataset. See .Xr zfs 8 for more information on ZFS delegated administration. .It Sy failmode Ns = Ns Sy wait Ns | Ns Sy continue Ns | Ns Sy panic Controls the system behavior in the event of catastrophic pool failure. This condition is typically a result of a loss of connectivity to the underlying storage device(s) or a failure of all devices within the pool. The behavior of such an event is determined as follows: .Bl -tag -width "continue" .It Sy wait Blocks all I/O access until the device connectivity is recovered and the errors are cleared with .Nm zpool Cm clear . This is the default behavior. .It Sy continue Returns .Er EIO to any new write I/O requests but allows reads to any of the remaining healthy devices. Any write requests that have yet to be committed to disk would be blocked. .It Sy panic Prints out a message to the console and generates a system crash dump. .El .It Sy feature@ Ns Ar feature_name Ns = Ns Sy enabled The value of this property is the current state of .Ar feature_name . The only valid value when setting this property is .Sy enabled which moves .Ar feature_name to the enabled state. See .Xr zpool-features 7 for details on feature states. .It Sy listsnapshots Ns = Ns Sy on Ns | Ns Sy off Controls whether information about snapshots associated with this pool is output when .Nm zfs Cm list is run without the .Fl t option. The default value is .Sy off . This property can also be referred to by its shortened name, .Sy listsnaps . .It Sy multihost Ns = Ns Sy on Ns | Ns Sy off Controls whether a pool activity check should be performed during .Nm zpool Cm import . When a pool is determined to be active it cannot be imported, even with the .Fl f option. This property is intended to be used in failover configurations where multiple hosts have access to a pool on shared storage. .Pp Multihost provides protection on import only. It does not protect against an individual device being used in multiple pools, regardless of the type of vdev. See the discussion under .Nm zpool Cm create . .Pp When this property is on, periodic writes to storage occur to show the pool is in use. See .Sy zfs_multihost_interval in the .Xr zfs 4 manual page. In order to enable this property each host must set a unique hostid. See .Xr genhostid 1 .Xr zgenhostid 8 .Xr spl 4 for additional details. The default value is .Sy off . .It Sy version Ns = Ns Ar version The current on-disk version of the pool. This can be increased, but never decreased. The preferred method of updating pools is with the .Nm zpool Cm upgrade command, though this property can be used when a specific version is needed for backwards compatibility. Once feature flags are enabled on a pool this property will no longer have a value. .El . .Ss User Properties In addition to the standard native properties, ZFS supports arbitrary user properties. User properties have no effect on ZFS behavior, but applications or administrators can use them to annotate pools. .Pp User property names must contain a colon .Pq Qq Sy \&: character to distinguish them from native properties. They may contain lowercase letters, numbers, and the following punctuation characters: colon .Pq Qq Sy \&: , dash .Pq Qq Sy - , period .Pq Qq Sy \&. , and underscore .Pq Qq Sy _ . The expected convention is that the property name is divided into two portions such as .Ar module : Ns Ar property , but this namespace is not enforced by ZFS. User property names can be at most 256 characters, and cannot begin with a dash .Pq Qq Sy - . .Pp When making programmatic use of user properties, it is strongly suggested to use a reversed DNS domain name for the .Ar module component of property names to reduce the chance that two independently-developed packages use the same property name for different purposes. .Pp The values of user properties are arbitrary strings and are never validated. All of the commands that operate on properties .Po Nm zpool Cm list , .Nm zpool Cm get , .Nm zpool Cm set , and so forth .Pc can be used to manipulate both native properties and user properties. Use .Nm zpool Cm set Ar name Ns = to clear a user property. Property values are limited to 8192 bytes. diff --git a/module/zcommon/zpool_prop.c b/module/zcommon/zpool_prop.c index b367c95b836a..1838c937b7ae 100644 --- a/module/zcommon/zpool_prop.c +++ b/module/zcommon/zpool_prop.c @@ -1,618 +1,624 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright (c) 2021, Colm Buckley - * Copyright (c) 2021, Klara Inc. + * Copyright (c) 2021, 2023, Klara Inc. */ #include #include #include #include #include #include "zfs_prop.h" #if !defined(_KERNEL) #include #include #include #endif static zprop_desc_t zpool_prop_table[ZPOOL_NUM_PROPS]; static zprop_desc_t vdev_prop_table[VDEV_NUM_PROPS]; zprop_desc_t * zpool_prop_get_table(void) { return (zpool_prop_table); } void zpool_prop_init(void) { static const zprop_index_t boolean_table[] = { { "off", 0}, { "on", 1}, { NULL } }; static const zprop_index_t failuremode_table[] = { { "wait", ZIO_FAILURE_MODE_WAIT }, { "continue", ZIO_FAILURE_MODE_CONTINUE }, { "panic", ZIO_FAILURE_MODE_PANIC }, { NULL } }; struct zfs_mod_supported_features *sfeatures = zfs_mod_list_supported(ZFS_SYSFS_POOL_PROPERTIES); /* string properties */ zprop_register_string(ZPOOL_PROP_ALTROOT, "altroot", NULL, PROP_DEFAULT, ZFS_TYPE_POOL, "", "ALTROOT", sfeatures); zprop_register_string(ZPOOL_PROP_BOOTFS, "bootfs", NULL, PROP_DEFAULT, ZFS_TYPE_POOL, "", "BOOTFS", sfeatures); zprop_register_string(ZPOOL_PROP_CACHEFILE, "cachefile", NULL, PROP_DEFAULT, ZFS_TYPE_POOL, " | none", "CACHEFILE", sfeatures); zprop_register_string(ZPOOL_PROP_COMMENT, "comment", NULL, PROP_DEFAULT, ZFS_TYPE_POOL, "", "COMMENT", sfeatures); zprop_register_string(ZPOOL_PROP_COMPATIBILITY, "compatibility", "off", PROP_DEFAULT, ZFS_TYPE_POOL, " | off | legacy", "COMPATIBILITY", sfeatures); /* readonly number properties */ zprop_register_number(ZPOOL_PROP_SIZE, "size", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "SIZE", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_FREE, "free", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "FREE", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_FREEING, "freeing", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "FREEING", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_CHECKPOINT, "checkpoint", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "CKPOINT", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_LEAKED, "leaked", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "LEAKED", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_ALLOCATED, "allocated", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "ALLOC", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_EXPANDSZ, "expandsize", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "EXPANDSZ", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_FRAGMENTATION, "fragmentation", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "FRAG", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_CAPACITY, "capacity", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "CAP", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_GUID, "guid", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "GUID", B_TRUE, sfeatures); zprop_register_number(ZPOOL_PROP_LOAD_GUID, "load_guid", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "LOAD_GUID", B_TRUE, sfeatures); zprop_register_number(ZPOOL_PROP_HEALTH, "health", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "HEALTH", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_DEDUPRATIO, "dedupratio", 0, PROP_READONLY, ZFS_TYPE_POOL, "<1.00x or higher if deduped>", "DEDUP", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_BCLONEUSED, "bcloneused", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "BCLONE_USED", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_BCLONESAVED, "bclonesaved", 0, PROP_READONLY, ZFS_TYPE_POOL, "", "BCLONE_SAVED", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_BCLONERATIO, "bcloneratio", 0, PROP_READONLY, ZFS_TYPE_POOL, "<1.00x or higher if cloned>", "BCLONE_RATIO", B_FALSE, sfeatures); + zprop_register_number(ZPOOL_PROP_DEDUP_TABLE_SIZE, "dedup_table_size", + 0, PROP_READONLY, ZFS_TYPE_POOL, "", "DDTSIZE", B_FALSE, + sfeatures); /* default number properties */ zprop_register_number(ZPOOL_PROP_VERSION, "version", SPA_VERSION, PROP_DEFAULT, ZFS_TYPE_POOL, "", "VERSION", B_FALSE, sfeatures); zprop_register_number(ZPOOL_PROP_ASHIFT, "ashift", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "", "ASHIFT", B_FALSE, sfeatures); + zprop_register_number(ZPOOL_PROP_DEDUP_TABLE_QUOTA, "dedup_table_quota", + UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_POOL, "", "DDTQUOTA", + B_FALSE, sfeatures); /* default index (boolean) properties */ zprop_register_index(ZPOOL_PROP_DELEGATION, "delegation", 1, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "DELEGATION", boolean_table, sfeatures); zprop_register_index(ZPOOL_PROP_AUTOREPLACE, "autoreplace", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "REPLACE", boolean_table, sfeatures); zprop_register_index(ZPOOL_PROP_LISTSNAPS, "listsnapshots", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "LISTSNAPS", boolean_table, sfeatures); zprop_register_index(ZPOOL_PROP_AUTOEXPAND, "autoexpand", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "EXPAND", boolean_table, sfeatures); zprop_register_index(ZPOOL_PROP_READONLY, "readonly", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "RDONLY", boolean_table, sfeatures); zprop_register_index(ZPOOL_PROP_MULTIHOST, "multihost", 0, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "MULTIHOST", boolean_table, sfeatures); /* default index properties */ zprop_register_index(ZPOOL_PROP_FAILUREMODE, "failmode", ZIO_FAILURE_MODE_WAIT, PROP_DEFAULT, ZFS_TYPE_POOL, "wait | continue | panic", "FAILMODE", failuremode_table, sfeatures); zprop_register_index(ZPOOL_PROP_AUTOTRIM, "autotrim", SPA_AUTOTRIM_OFF, PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "AUTOTRIM", boolean_table, sfeatures); /* hidden properties */ zprop_register_hidden(ZPOOL_PROP_NAME, "name", PROP_TYPE_STRING, PROP_READONLY, ZFS_TYPE_POOL, "NAME", B_TRUE, sfeatures); zprop_register_hidden(ZPOOL_PROP_MAXBLOCKSIZE, "maxblocksize", PROP_TYPE_NUMBER, PROP_READONLY, ZFS_TYPE_POOL, "MAXBLOCKSIZE", B_FALSE, sfeatures); zprop_register_hidden(ZPOOL_PROP_TNAME, "tname", PROP_TYPE_STRING, PROP_ONETIME, ZFS_TYPE_POOL, "TNAME", B_TRUE, sfeatures); zprop_register_hidden(ZPOOL_PROP_MAXDNODESIZE, "maxdnodesize", PROP_TYPE_NUMBER, PROP_READONLY, ZFS_TYPE_POOL, "MAXDNODESIZE", B_FALSE, sfeatures); zprop_register_hidden(ZPOOL_PROP_DEDUPDITTO, "dedupditto", PROP_TYPE_NUMBER, PROP_DEFAULT, ZFS_TYPE_POOL, "DEDUPDITTO", B_FALSE, sfeatures); zfs_mod_list_supported_free(sfeatures); } /* * Given a property name and its type, returns the corresponding property ID. */ zpool_prop_t zpool_name_to_prop(const char *propname) { return (zprop_name_to_prop(propname, ZFS_TYPE_POOL)); } /* * Given a pool property ID, returns the corresponding name. * Assuming the pool property ID is valid. */ const char * zpool_prop_to_name(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_name); } zprop_type_t zpool_prop_get_type(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_proptype); } boolean_t zpool_prop_readonly(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_attr == PROP_READONLY); } boolean_t zpool_prop_setonce(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_attr == PROP_ONETIME); } const char * zpool_prop_default_string(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_strdefault); } uint64_t zpool_prop_default_numeric(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_numdefault); } /* * Returns true if this is a valid feature@ property. */ boolean_t zpool_prop_feature(const char *name) { static const char *prefix = "feature@"; return (strncmp(name, prefix, strlen(prefix)) == 0); } /* * Returns true if this is a valid unsupported@ property. */ boolean_t zpool_prop_unsupported(const char *name) { static const char *prefix = "unsupported@"; return (strncmp(name, prefix, strlen(prefix)) == 0); } int zpool_prop_string_to_index(zpool_prop_t prop, const char *string, uint64_t *index) { return (zprop_string_to_index(prop, string, index, ZFS_TYPE_POOL)); } int zpool_prop_index_to_string(zpool_prop_t prop, uint64_t index, const char **string) { return (zprop_index_to_string(prop, index, string, ZFS_TYPE_POOL)); } uint64_t zpool_prop_random_value(zpool_prop_t prop, uint64_t seed) { return (zprop_random_value(prop, seed, ZFS_TYPE_POOL)); } #ifndef _KERNEL #include const char * zpool_prop_values(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_values); } const char * zpool_prop_column_name(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_colname); } boolean_t zpool_prop_align_right(zpool_prop_t prop) { return (zpool_prop_table[prop].pd_rightalign); } #endif zprop_desc_t * vdev_prop_get_table(void) { return (vdev_prop_table); } void vdev_prop_init(void) { static const zprop_index_t boolean_table[] = { { "off", 0}, { "on", 1}, { NULL } }; static const zprop_index_t boolean_na_table[] = { { "off", 0}, { "on", 1}, { "-", 2}, /* ZPROP_BOOLEAN_NA */ { NULL } }; struct zfs_mod_supported_features *sfeatures = zfs_mod_list_supported(ZFS_SYSFS_VDEV_PROPERTIES); /* string properties */ zprop_register_string(VDEV_PROP_COMMENT, "comment", NULL, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "COMMENT", sfeatures); zprop_register_string(VDEV_PROP_PATH, "path", NULL, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "PATH", sfeatures); zprop_register_string(VDEV_PROP_DEVID, "devid", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "DEVID", sfeatures); zprop_register_string(VDEV_PROP_PHYS_PATH, "physpath", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "PHYSPATH", sfeatures); zprop_register_string(VDEV_PROP_ENC_PATH, "encpath", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "ENCPATH", sfeatures); zprop_register_string(VDEV_PROP_FRU, "fru", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "FRU", sfeatures); zprop_register_string(VDEV_PROP_PARENT, "parent", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "PARENT", sfeatures); zprop_register_string(VDEV_PROP_CHILDREN, "children", NULL, PROP_READONLY, ZFS_TYPE_VDEV, "", "CHILDREN", sfeatures); /* readonly number properties */ zprop_register_number(VDEV_PROP_SIZE, "size", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "SIZE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_FREE, "free", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "FREE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_ALLOCATED, "allocated", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "ALLOC", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_EXPANDSZ, "expandsize", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "EXPANDSZ", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_FRAGMENTATION, "fragmentation", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "FRAG", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_CAPACITY, "capacity", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "CAP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_GUID, "guid", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "GUID", B_TRUE, sfeatures); zprop_register_number(VDEV_PROP_STATE, "state", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "STATE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BOOTSIZE, "bootsize", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "BOOTSIZE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_ASIZE, "asize", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "ASIZE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_PSIZE, "psize", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "PSIZE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_ASHIFT, "ashift", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "ASHIFT", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_PARITY, "parity", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "PARITY", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_NUMCHILDREN, "numchildren", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "NUMCHILD", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_READ_ERRORS, "read_errors", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "RDERR", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_WRITE_ERRORS, "write_errors", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "WRERR", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_CHECKSUM_ERRORS, "checksum_errors", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "CKERR", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_INITIALIZE_ERRORS, "initialize_errors", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "INITERR", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_TRIM_ERRORS, "trim_errors", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "TRIMERR", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_SLOW_IOS, "slow_ios", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "SLOW", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_NULL, "null_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "NULLOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_READ, "read_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "READOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_WRITE, "write_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "WRITEOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_FREE, "free_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "FREEOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_CLAIM, "claim_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "CLAIMOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_OPS_TRIM, "trim_ops", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "TRIMOP", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_NULL, "null_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "NULLBYTE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_READ, "read_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "READBYTE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_WRITE, "write_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "WRITEBYTE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_FREE, "free_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "FREEBYTE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_CLAIM, "claim_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "CLAIMBYTE", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_BYTES_TRIM, "trim_bytes", 0, PROP_READONLY, ZFS_TYPE_VDEV, "", "TRIMBYTE", B_FALSE, sfeatures); /* default numeric properties */ zprop_register_number(VDEV_PROP_CHECKSUM_N, "checksum_n", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "CKSUM_N", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_CHECKSUM_T, "checksum_t", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "CKSUM_T", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_IO_N, "io_n", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "IO_N", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_IO_T, "io_t", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "IO_T", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_SLOW_IO_N, "slow_io_n", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "SLOW_IO_N", B_FALSE, sfeatures); zprop_register_number(VDEV_PROP_SLOW_IO_T, "slow_io_t", UINT64_MAX, PROP_DEFAULT, ZFS_TYPE_VDEV, "", "SLOW_IO_T", B_FALSE, sfeatures); /* default index (boolean) properties */ zprop_register_index(VDEV_PROP_REMOVING, "removing", 0, PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "REMOVING", boolean_table, sfeatures); zprop_register_index(VDEV_PROP_ALLOCATING, "allocating", 1, PROP_DEFAULT, ZFS_TYPE_VDEV, "on | off", "ALLOCATING", boolean_na_table, sfeatures); zprop_register_index(VDEV_PROP_RAIDZ_EXPANDING, "raidz_expanding", 0, PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "RAIDZ_EXPANDING", boolean_table, sfeatures); zprop_register_index(VDEV_PROP_TRIM_SUPPORT, "trim_support", 0, PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "TRIMSUP", boolean_table, sfeatures); /* default index properties */ zprop_register_index(VDEV_PROP_FAILFAST, "failfast", B_TRUE, PROP_DEFAULT, ZFS_TYPE_VDEV, "on | off", "FAILFAST", boolean_table, sfeatures); /* hidden properties */ zprop_register_hidden(VDEV_PROP_NAME, "name", PROP_TYPE_STRING, PROP_READONLY, ZFS_TYPE_VDEV, "NAME", B_TRUE, sfeatures); zfs_mod_list_supported_free(sfeatures); } /* * Given a property name and its type, returns the corresponding property ID. */ vdev_prop_t vdev_name_to_prop(const char *propname) { return (zprop_name_to_prop(propname, ZFS_TYPE_VDEV)); } /* * Returns true if this is a valid user-defined property (one with a ':'). */ boolean_t vdev_prop_user(const char *name) { int i; char c; boolean_t foundsep = B_FALSE; for (i = 0; i < strlen(name); i++) { c = name[i]; if (!zprop_valid_char(c)) return (B_FALSE); if (c == ':') foundsep = B_TRUE; } return (foundsep); } /* * Given a pool property ID, returns the corresponding name. * Assuming the pool property ID is valid. */ const char * vdev_prop_to_name(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_name); } zprop_type_t vdev_prop_get_type(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_proptype); } boolean_t vdev_prop_readonly(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_attr == PROP_READONLY); } const char * vdev_prop_default_string(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_strdefault); } uint64_t vdev_prop_default_numeric(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_numdefault); } int vdev_prop_string_to_index(vdev_prop_t prop, const char *string, uint64_t *index) { return (zprop_string_to_index(prop, string, index, ZFS_TYPE_VDEV)); } int vdev_prop_index_to_string(vdev_prop_t prop, uint64_t index, const char **string) { return (zprop_index_to_string(prop, index, string, ZFS_TYPE_VDEV)); } /* * Returns true if this is a valid vdev property. */ boolean_t zpool_prop_vdev(const char *name) { return (vdev_name_to_prop(name) != VDEV_PROP_INVAL); } uint64_t vdev_prop_random_value(vdev_prop_t prop, uint64_t seed) { return (zprop_random_value(prop, seed, ZFS_TYPE_VDEV)); } #ifndef _KERNEL const char * vdev_prop_values(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_values); } const char * vdev_prop_column_name(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_colname); } boolean_t vdev_prop_align_right(vdev_prop_t prop) { return (vdev_prop_table[prop].pd_rightalign); } #endif #if defined(_KERNEL) /* zpool property functions */ EXPORT_SYMBOL(zpool_prop_init); EXPORT_SYMBOL(zpool_prop_get_type); EXPORT_SYMBOL(zpool_prop_get_table); /* vdev property functions */ EXPORT_SYMBOL(vdev_prop_init); EXPORT_SYMBOL(vdev_prop_get_type); EXPORT_SYMBOL(vdev_prop_get_table); /* Pool property functions shared between libzfs and kernel. */ EXPORT_SYMBOL(zpool_name_to_prop); EXPORT_SYMBOL(zpool_prop_to_name); EXPORT_SYMBOL(zpool_prop_default_string); EXPORT_SYMBOL(zpool_prop_default_numeric); EXPORT_SYMBOL(zpool_prop_readonly); EXPORT_SYMBOL(zpool_prop_feature); EXPORT_SYMBOL(zpool_prop_unsupported); EXPORT_SYMBOL(zpool_prop_index_to_string); EXPORT_SYMBOL(zpool_prop_string_to_index); EXPORT_SYMBOL(zpool_prop_vdev); /* vdev property functions shared between libzfs and kernel. */ EXPORT_SYMBOL(vdev_name_to_prop); EXPORT_SYMBOL(vdev_prop_user); EXPORT_SYMBOL(vdev_prop_to_name); EXPORT_SYMBOL(vdev_prop_default_string); EXPORT_SYMBOL(vdev_prop_default_numeric); EXPORT_SYMBOL(vdev_prop_readonly); EXPORT_SYMBOL(vdev_prop_index_to_string); EXPORT_SYMBOL(vdev_prop_string_to_index); #endif diff --git a/module/zfs/ddt.c b/module/zfs/ddt.c index 4c53cb0a2f9b..ca73f1a31408 100644 --- a/module/zfs/ddt.c +++ b/module/zfs/ddt.c @@ -1,1170 +1,1284 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2016 by Delphix. All rights reserved. * Copyright (c) 2022 by Pawel Jakub Dawidek * Copyright (c) 2023, Klara Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* * # DDT: Deduplication tables * * The dedup subsystem provides block-level deduplication. When enabled, blocks * to be written will have the dedup (D) bit set, which causes them to be * tracked in a "dedup table", or DDT. If a block has been seen before (exists * in the DDT), instead of being written, it will instead be made to reference * the existing on-disk data, and a refcount bumped in the DDT instead. * * ## Dedup tables and entries * * Conceptually, a DDT is a dictionary or map. Each entry has a "key" * (ddt_key_t) made up a block's checksum and certian properties, and a "value" * (one or more ddt_phys_t) containing valid DVAs for the block's data, birth * time and refcount. Together these are enough to track references to a * specific block, to build a valid block pointer to reference that block (for * freeing, scrubbing, etc), and to fill a new block pointer with the missing * pieces to make it seem like it was written. * * There's a single DDT (ddt_t) for each checksum type, held in spa_ddt[]. * Within each DDT, there can be multiple storage "types" (ddt_type_t, on-disk * object data formats, each with their own implementations) and "classes" * (ddt_class_t, instance of a storage type object, for entries with a specific * characteristic). An entry (key) will only ever exist on one of these objects * at any given time, but may be moved from one to another if their type or * class changes. * * The DDT is driven by the write IO pipeline (zio_ddt_write()). When a block * is to be written, before DVAs have been allocated, ddt_lookup() is called to * see if the block has been seen before. If its not found, the write proceeds * as normal, and after it succeeds, a new entry is created. If it is found, we * fill the BP with the DVAs from the entry, increment the refcount and cause * the write IO to return immediately. * * Each ddt_phys_t slot in the entry represents a separate dedup block for the * same content/checksum. The slot is selected based on the zp_copies parameter * the block is written with, that is, the number of DVAs in the block. The * "ditto" slot (DDT_PHYS_DITTO) used to be used for now-removed "dedupditto" * feature. These are no longer written, and will be freed if encountered on * old pools. * * ## Lifetime of an entry * * A DDT can be enormous, and typically is not held in memory all at once. * Instead, the changes to an entry are tracked in memory, and written down to * disk at the end of each txg. * * A "live" in-memory entry (ddt_entry_t) is a node on the live tree * (ddt_tree). At the start of a txg, ddt_tree is empty. When an entry is * required for IO, ddt_lookup() is called. If an entry already exists on * ddt_tree, it is returned. Otherwise, a new one is created, and the * type/class objects for the DDT are searched for that key. If its found, its * value is copied into the live entry. If not, an empty entry is created. * * The live entry will be modified during the txg, usually by modifying the * refcount, but sometimes by adding or updating DVAs. At the end of the txg * (during spa_sync()), type and class are recalculated for entry (see * ddt_sync_entry()), and the entry is written to the appropriate storage * object and (if necessary), removed from an old one. ddt_tree is cleared and * the next txg can start. * + * ## Dedup quota + * + * A maximum size for all DDTs on the pool can be set with the + * dedup_table_quota property. This is determined in ddt_over_quota() and + * enforced during ddt_lookup(). If the pool is at or over its quota limit, + * ddt_lookup() will only return entries for existing blocks, as updates are + * still possible. New entries will not be created; instead, ddt_lookup() will + * return NULL. In response, the DDT write stage (zio_ddt_write()) will remove + * the D bit on the block and reissue the IO as a regular write. The block will + * not be deduplicated. + * + * Note that this is based on the on-disk size of the dedup store. Reclaiming + * this space after deleting entries relies on the ZAP "shrinking" behaviour, + * without which, no space would be recovered and the DDT would continue to be + * considered "over quota". See zap_shrink_enabled. + * * ## Repair IO * * If a read on a dedup block fails, but there are other copies of the block in * the other ddt_phys_t slots, reads will be issued for those instead * (zio_ddt_read_start()). If one of those succeeds, the read is returned to * the caller, and a copy is stashed on the entry's dde_repair_abd. * * During the end-of-txg sync, any entries with a dde_repair_abd get a * "rewrite" write issued for the original block pointer, with the data read * from the alternate block. If the block is actually damaged, this will invoke * the pool's "self-healing" mechanism, and repair the block. * * ## Scanning (scrub/resilver) * * If dedup is active, the scrub machinery will walk the dedup table first, and * scrub all blocks with refcnt > 1 first. After that it will move on to the * regular top-down scrub, and exclude the refcnt > 1 blocks when it sees them. * In this way, heavily deduplicated blocks are only scrubbed once. See the * commentary on dsl_scan_ddt() for more details. * * Walking the DDT is done via ddt_walk(). The current position is stored in a * ddt_bookmark_t, which represents a stable position in the storage object. * This bookmark is stored by the scan machinery, and must reference the same * position on the object even if the object changes, the pool is exported, or * OpenZFS is upgraded. * * ## Interaction with block cloning * * If block cloning and dedup are both enabled on a pool, BRT will look for the * dedup bit on an incoming block pointer. If set, it will call into the DDT * (ddt_addref()) to add a reference to the block, instead of adding a * reference to the BRT. See brt_pending_apply(). */ /* * These are the only checksums valid for dedup. They must match the list * from dedup_table in zfs_prop.c */ #define DDT_CHECKSUM_VALID(c) \ (c == ZIO_CHECKSUM_SHA256 || c == ZIO_CHECKSUM_SHA512 || \ c == ZIO_CHECKSUM_SKEIN || c == ZIO_CHECKSUM_EDONR || \ c == ZIO_CHECKSUM_BLAKE3) static kmem_cache_t *ddt_cache; static kmem_cache_t *ddt_entry_cache; /* * Enable/disable prefetching of dedup-ed blocks which are going to be freed. */ int zfs_dedup_prefetch = 0; +/* + * If the dedup class cannot satisfy a DDT allocation, treat as over quota + * for this many TXGs. + */ +uint_t dedup_class_wait_txgs = 5; + + static const ddt_ops_t *const ddt_ops[DDT_TYPES] = { &ddt_zap_ops, }; static const char *const ddt_class_name[DDT_CLASSES] = { "ditto", "duplicate", "unique", }; static void ddt_object_create(ddt_t *ddt, ddt_type_t type, ddt_class_t class, dmu_tx_t *tx) { spa_t *spa = ddt->ddt_spa; objset_t *os = ddt->ddt_os; uint64_t *objectp = &ddt->ddt_object[type][class]; boolean_t prehash = zio_checksum_table[ddt->ddt_checksum].ci_flags & ZCHECKSUM_FLAG_DEDUP; char name[DDT_NAMELEN]; ddt_object_name(ddt, type, class, name); ASSERT3U(*objectp, ==, 0); VERIFY0(ddt_ops[type]->ddt_op_create(os, objectp, tx, prehash)); ASSERT3U(*objectp, !=, 0); VERIFY0(zap_add(os, DMU_POOL_DIRECTORY_OBJECT, name, sizeof (uint64_t), 1, objectp, tx)); VERIFY0(zap_add(os, spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &ddt->ddt_histogram[type][class], tx)); } static void ddt_object_destroy(ddt_t *ddt, ddt_type_t type, ddt_class_t class, dmu_tx_t *tx) { spa_t *spa = ddt->ddt_spa; objset_t *os = ddt->ddt_os; uint64_t *objectp = &ddt->ddt_object[type][class]; uint64_t count; char name[DDT_NAMELEN]; ddt_object_name(ddt, type, class, name); ASSERT3U(*objectp, !=, 0); ASSERT(ddt_histogram_empty(&ddt->ddt_histogram[type][class])); VERIFY0(ddt_object_count(ddt, type, class, &count)); VERIFY0(count); VERIFY0(zap_remove(os, DMU_POOL_DIRECTORY_OBJECT, name, tx)); VERIFY0(zap_remove(os, spa->spa_ddt_stat_object, name, tx)); VERIFY0(ddt_ops[type]->ddt_op_destroy(os, *objectp, tx)); memset(&ddt->ddt_object_stats[type][class], 0, sizeof (ddt_object_t)); *objectp = 0; } static int ddt_object_load(ddt_t *ddt, ddt_type_t type, ddt_class_t class) { ddt_object_t *ddo = &ddt->ddt_object_stats[type][class]; dmu_object_info_t doi; uint64_t count; char name[DDT_NAMELEN]; int error; ddt_object_name(ddt, type, class, name); error = zap_lookup(ddt->ddt_os, DMU_POOL_DIRECTORY_OBJECT, name, sizeof (uint64_t), 1, &ddt->ddt_object[type][class]); if (error != 0) return (error); error = zap_lookup(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &ddt->ddt_histogram[type][class]); if (error != 0) return (error); /* * Seed the cached statistics. */ error = ddt_object_info(ddt, type, class, &doi); if (error) return (error); error = ddt_object_count(ddt, type, class, &count); if (error) return (error); ddo->ddo_count = count; ddo->ddo_dspace = doi.doi_physical_blocks_512 << 9; ddo->ddo_mspace = doi.doi_fill_count * doi.doi_data_block_size; return (0); } static void ddt_object_sync(ddt_t *ddt, ddt_type_t type, ddt_class_t class, dmu_tx_t *tx) { ddt_object_t *ddo = &ddt->ddt_object_stats[type][class]; dmu_object_info_t doi; uint64_t count; char name[DDT_NAMELEN]; ddt_object_name(ddt, type, class, name); VERIFY0(zap_update(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &ddt->ddt_histogram[type][class], tx)); /* * Cache DDT statistics; this is the only time they'll change. */ VERIFY0(ddt_object_info(ddt, type, class, &doi)); VERIFY0(ddt_object_count(ddt, type, class, &count)); ddo->ddo_count = count; ddo->ddo_dspace = doi.doi_physical_blocks_512 << 9; ddo->ddo_mspace = doi.doi_fill_count * doi.doi_data_block_size; } static boolean_t ddt_object_exists(ddt_t *ddt, ddt_type_t type, ddt_class_t class) { return (!!ddt->ddt_object[type][class]); } static int ddt_object_lookup(ddt_t *ddt, ddt_type_t type, ddt_class_t class, ddt_entry_t *dde) { if (!ddt_object_exists(ddt, type, class)) return (SET_ERROR(ENOENT)); return (ddt_ops[type]->ddt_op_lookup(ddt->ddt_os, ddt->ddt_object[type][class], &dde->dde_key, dde->dde_phys, sizeof (dde->dde_phys))); } static int ddt_object_contains(ddt_t *ddt, ddt_type_t type, ddt_class_t class, const ddt_key_t *ddk) { if (!ddt_object_exists(ddt, type, class)) return (SET_ERROR(ENOENT)); return (ddt_ops[type]->ddt_op_contains(ddt->ddt_os, ddt->ddt_object[type][class], ddk)); } static void ddt_object_prefetch(ddt_t *ddt, ddt_type_t type, ddt_class_t class, const ddt_key_t *ddk) { if (!ddt_object_exists(ddt, type, class)) return; ddt_ops[type]->ddt_op_prefetch(ddt->ddt_os, ddt->ddt_object[type][class], ddk); } static int ddt_object_update(ddt_t *ddt, ddt_type_t type, ddt_class_t class, ddt_entry_t *dde, dmu_tx_t *tx) { ASSERT(ddt_object_exists(ddt, type, class)); return (ddt_ops[type]->ddt_op_update(ddt->ddt_os, ddt->ddt_object[type][class], &dde->dde_key, dde->dde_phys, sizeof (dde->dde_phys), tx)); } static int ddt_object_remove(ddt_t *ddt, ddt_type_t type, ddt_class_t class, const ddt_key_t *ddk, dmu_tx_t *tx) { ASSERT(ddt_object_exists(ddt, type, class)); return (ddt_ops[type]->ddt_op_remove(ddt->ddt_os, ddt->ddt_object[type][class], ddk, tx)); } int ddt_object_walk(ddt_t *ddt, ddt_type_t type, ddt_class_t class, uint64_t *walk, ddt_entry_t *dde) { ASSERT(ddt_object_exists(ddt, type, class)); return (ddt_ops[type]->ddt_op_walk(ddt->ddt_os, ddt->ddt_object[type][class], walk, &dde->dde_key, dde->dde_phys, sizeof (dde->dde_phys))); } int ddt_object_count(ddt_t *ddt, ddt_type_t type, ddt_class_t class, uint64_t *count) { ASSERT(ddt_object_exists(ddt, type, class)); return (ddt_ops[type]->ddt_op_count(ddt->ddt_os, ddt->ddt_object[type][class], count)); } int ddt_object_info(ddt_t *ddt, ddt_type_t type, ddt_class_t class, dmu_object_info_t *doi) { if (!ddt_object_exists(ddt, type, class)) return (SET_ERROR(ENOENT)); return (dmu_object_info(ddt->ddt_os, ddt->ddt_object[type][class], doi)); } void ddt_object_name(ddt_t *ddt, ddt_type_t type, ddt_class_t class, char *name) { (void) snprintf(name, DDT_NAMELEN, DMU_POOL_DDT, zio_checksum_table[ddt->ddt_checksum].ci_name, ddt_ops[type]->ddt_op_name, ddt_class_name[class]); } void ddt_bp_fill(const ddt_phys_t *ddp, blkptr_t *bp, uint64_t txg) { ASSERT3U(txg, !=, 0); for (int d = 0; d < SPA_DVAS_PER_BP; d++) bp->blk_dva[d] = ddp->ddp_dva[d]; BP_SET_BIRTH(bp, txg, ddp->ddp_phys_birth); } /* * The bp created via this function may be used for repairs and scrub, but it * will be missing the salt / IV required to do a full decrypting read. */ void ddt_bp_create(enum zio_checksum checksum, const ddt_key_t *ddk, const ddt_phys_t *ddp, blkptr_t *bp) { BP_ZERO(bp); if (ddp != NULL) ddt_bp_fill(ddp, bp, ddp->ddp_phys_birth); bp->blk_cksum = ddk->ddk_cksum; BP_SET_LSIZE(bp, DDK_GET_LSIZE(ddk)); BP_SET_PSIZE(bp, DDK_GET_PSIZE(ddk)); BP_SET_COMPRESS(bp, DDK_GET_COMPRESS(ddk)); BP_SET_CRYPT(bp, DDK_GET_CRYPT(ddk)); BP_SET_FILL(bp, 1); BP_SET_CHECKSUM(bp, checksum); BP_SET_TYPE(bp, DMU_OT_DEDUP); BP_SET_LEVEL(bp, 0); BP_SET_DEDUP(bp, 1); BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER); } void ddt_key_fill(ddt_key_t *ddk, const blkptr_t *bp) { ddk->ddk_cksum = bp->blk_cksum; ddk->ddk_prop = 0; ASSERT(BP_IS_ENCRYPTED(bp) || !BP_USES_CRYPT(bp)); DDK_SET_LSIZE(ddk, BP_GET_LSIZE(bp)); DDK_SET_PSIZE(ddk, BP_GET_PSIZE(bp)); DDK_SET_COMPRESS(ddk, BP_GET_COMPRESS(bp)); DDK_SET_CRYPT(ddk, BP_USES_CRYPT(bp)); } void ddt_phys_fill(ddt_phys_t *ddp, const blkptr_t *bp) { ASSERT0(ddp->ddp_phys_birth); for (int d = 0; d < SPA_DVAS_PER_BP; d++) ddp->ddp_dva[d] = bp->blk_dva[d]; ddp->ddp_phys_birth = BP_GET_BIRTH(bp); } void ddt_phys_clear(ddt_phys_t *ddp) { memset(ddp, 0, sizeof (*ddp)); } void ddt_phys_addref(ddt_phys_t *ddp) { ddp->ddp_refcnt++; } void ddt_phys_decref(ddt_phys_t *ddp) { if (ddp) { ASSERT3U(ddp->ddp_refcnt, >, 0); ddp->ddp_refcnt--; } } static void ddt_phys_free(ddt_t *ddt, ddt_key_t *ddk, ddt_phys_t *ddp, uint64_t txg) { blkptr_t blk; ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk); /* * We clear the dedup bit so that zio_free() will actually free the * space, rather than just decrementing the refcount in the DDT. */ BP_SET_DEDUP(&blk, 0); ddt_phys_clear(ddp); zio_free(ddt->ddt_spa, txg, &blk); } ddt_phys_t * ddt_phys_select(const ddt_entry_t *dde, const blkptr_t *bp) { ddt_phys_t *ddp = (ddt_phys_t *)dde->dde_phys; for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) { if (DVA_EQUAL(BP_IDENTITY(bp), &ddp->ddp_dva[0]) && BP_GET_BIRTH(bp) == ddp->ddp_phys_birth) return (ddp); } return (NULL); } uint64_t ddt_phys_total_refcnt(const ddt_entry_t *dde) { uint64_t refcnt = 0; for (int p = DDT_PHYS_SINGLE; p <= DDT_PHYS_TRIPLE; p++) refcnt += dde->dde_phys[p].ddp_refcnt; return (refcnt); } ddt_t * ddt_select(spa_t *spa, const blkptr_t *bp) { ASSERT(DDT_CHECKSUM_VALID(BP_GET_CHECKSUM(bp))); return (spa->spa_ddt[BP_GET_CHECKSUM(bp)]); } void ddt_enter(ddt_t *ddt) { mutex_enter(&ddt->ddt_lock); } void ddt_exit(ddt_t *ddt) { mutex_exit(&ddt->ddt_lock); } void ddt_init(void) { ddt_cache = kmem_cache_create("ddt_cache", sizeof (ddt_t), 0, NULL, NULL, NULL, NULL, NULL, 0); ddt_entry_cache = kmem_cache_create("ddt_entry_cache", sizeof (ddt_entry_t), 0, NULL, NULL, NULL, NULL, NULL, 0); } void ddt_fini(void) { kmem_cache_destroy(ddt_entry_cache); kmem_cache_destroy(ddt_cache); } static ddt_entry_t * ddt_alloc(const ddt_key_t *ddk) { ddt_entry_t *dde; dde = kmem_cache_alloc(ddt_entry_cache, KM_SLEEP); memset(dde, 0, sizeof (ddt_entry_t)); cv_init(&dde->dde_cv, NULL, CV_DEFAULT, NULL); dde->dde_key = *ddk; return (dde); } static void ddt_free(ddt_entry_t *dde) { - ASSERT(dde->dde_flags & DDE_FLAG_LOADED); - for (int p = 0; p < DDT_PHYS_TYPES; p++) ASSERT3P(dde->dde_lead_zio[p], ==, NULL); if (dde->dde_repair_abd != NULL) abd_free(dde->dde_repair_abd); cv_destroy(&dde->dde_cv); kmem_cache_free(ddt_entry_cache, dde); } void ddt_remove(ddt_t *ddt, ddt_entry_t *dde) { ASSERT(MUTEX_HELD(&ddt->ddt_lock)); avl_remove(&ddt->ddt_tree, dde); ddt_free(dde); } +static boolean_t +ddt_special_over_quota(spa_t *spa, metaslab_class_t *mc) +{ + if (mc != NULL && metaslab_class_get_space(mc) > 0) { + /* Over quota if allocating outside of this special class */ + if (spa_syncing_txg(spa) <= spa->spa_dedup_class_full_txg + + dedup_class_wait_txgs) { + /* Waiting for some deferred frees to be processed */ + return (B_TRUE); + } + + /* + * We're considered over quota when we hit 85% full, or for + * larger drives, when there is less than 8GB free. + */ + uint64_t allocated = metaslab_class_get_alloc(mc); + uint64_t capacity = metaslab_class_get_space(mc); + uint64_t limit = MAX(capacity * 85 / 100, + (capacity > (1LL<<33)) ? capacity - (1LL<<33) : 0); + + return (allocated >= limit); + } + return (B_FALSE); +} + +/* + * Check if the DDT is over its quota. This can be due to a few conditions: + * 1. 'dedup_table_quota' property is not 0 (none) and the dedup dsize + * exceeds this limit + * + * 2. 'dedup_table_quota' property is set to automatic and + * a. the dedup or special allocation class could not satisfy a DDT + * allocation in a recent transaction + * b. the dedup or special allocation class has exceeded its 85% limit + */ +static boolean_t +ddt_over_quota(spa_t *spa) +{ + if (spa->spa_dedup_table_quota == 0) + return (B_FALSE); + + if (spa->spa_dedup_table_quota != UINT64_MAX) + return (ddt_get_ddt_dsize(spa) > spa->spa_dedup_table_quota); + + /* + * For automatic quota, table size is limited by dedup or special class + */ + if (ddt_special_over_quota(spa, spa_dedup_class(spa))) + return (B_TRUE); + else if (spa_special_has_ddt(spa) && + ddt_special_over_quota(spa, spa_special_class(spa))) + return (B_TRUE); + + return (B_FALSE); +} + ddt_entry_t * ddt_lookup(ddt_t *ddt, const blkptr_t *bp, boolean_t add) { + spa_t *spa = ddt->ddt_spa; ddt_key_t search; ddt_entry_t *dde; ddt_type_t type; ddt_class_t class; avl_index_t where; int error; ASSERT(MUTEX_HELD(&ddt->ddt_lock)); ddt_key_fill(&search, bp); /* Find an existing live entry */ dde = avl_find(&ddt->ddt_tree, &search, &where); if (dde != NULL) { - /* Found it. If it's already loaded, we can just return it. */ + /* If we went over quota, act like we didn't find it */ + if (dde->dde_flags & DDE_FLAG_OVERQUOTA) + return (NULL); + + /* If it's already loaded, we can just return it. */ if (dde->dde_flags & DDE_FLAG_LOADED) return (dde); /* Someone else is loading it, wait for it. */ + dde->dde_waiters++; while (!(dde->dde_flags & DDE_FLAG_LOADED)) cv_wait(&dde->dde_cv, &ddt->ddt_lock); + dde->dde_waiters--; + + /* Loaded but over quota, forget we were ever here */ + if (dde->dde_flags & DDE_FLAG_OVERQUOTA) { + if (dde->dde_waiters == 0) { + avl_remove(&ddt->ddt_tree, dde); + ddt_free(dde); + } + return (NULL); + } return (dde); } /* Not found. */ if (!add) return (NULL); /* Time to make a new entry. */ dde = ddt_alloc(&search); avl_insert(&ddt->ddt_tree, dde, where); /* * ddt_tree is now stable, so unlock and let everyone else keep moving. * Anyone landing on this entry will find it without DDE_FLAG_LOADED, * and go to sleep waiting for it above. */ ddt_exit(ddt); /* Search all store objects for the entry. */ error = ENOENT; for (type = 0; type < DDT_TYPES; type++) { for (class = 0; class < DDT_CLASSES; class++) { error = ddt_object_lookup(ddt, type, class, dde); if (error != ENOENT) { ASSERT0(error); break; } } if (error != ENOENT) break; } ddt_enter(ddt); ASSERT(!(dde->dde_flags & DDE_FLAG_LOADED)); dde->dde_type = type; /* will be DDT_TYPES if no entry found */ dde->dde_class = class; /* will be DDT_CLASSES if no entry found */ - if (error == 0) + if (dde->dde_type == DDT_TYPES && + dde->dde_class == DDT_CLASSES && + ddt_over_quota(spa)) { + /* Over quota. If no one is waiting, clean up right now. */ + if (dde->dde_waiters == 0) { + avl_remove(&ddt->ddt_tree, dde); + ddt_free(dde); + return (NULL); + } + + /* Flag cleanup required */ + dde->dde_flags |= DDE_FLAG_OVERQUOTA; + } else if (error == 0) { ddt_stat_update(ddt, dde, -1ULL); + } /* Entry loaded, everyone can proceed now */ dde->dde_flags |= DDE_FLAG_LOADED; cv_broadcast(&dde->dde_cv); - return (dde); + return (dde->dde_flags & DDE_FLAG_OVERQUOTA ? NULL : dde); } void ddt_prefetch(spa_t *spa, const blkptr_t *bp) { ddt_t *ddt; ddt_key_t ddk; if (!zfs_dedup_prefetch || bp == NULL || !BP_GET_DEDUP(bp)) return; /* * We only remove the DDT once all tables are empty and only * prefetch dedup blocks when there are entries in the DDT. * Thus no locking is required as the DDT can't disappear on us. */ ddt = ddt_select(spa, bp); ddt_key_fill(&ddk, bp); for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { ddt_object_prefetch(ddt, type, class, &ddk); } } } /* * Key comparison. Any struct wanting to make use of this function must have * the key as the first element. */ #define DDT_KEY_CMP_LEN (sizeof (ddt_key_t) / sizeof (uint16_t)) typedef struct ddt_key_cmp { uint16_t u16[DDT_KEY_CMP_LEN]; } ddt_key_cmp_t; int ddt_key_compare(const void *x1, const void *x2) { const ddt_key_cmp_t *k1 = (const ddt_key_cmp_t *)x1; const ddt_key_cmp_t *k2 = (const ddt_key_cmp_t *)x2; int32_t cmp = 0; for (int i = 0; i < DDT_KEY_CMP_LEN; i++) { cmp = (int32_t)k1->u16[i] - (int32_t)k2->u16[i]; if (likely(cmp)) break; } return (TREE_ISIGN(cmp)); } static ddt_t * ddt_table_alloc(spa_t *spa, enum zio_checksum c) { ddt_t *ddt; ddt = kmem_cache_alloc(ddt_cache, KM_SLEEP); memset(ddt, 0, sizeof (ddt_t)); mutex_init(&ddt->ddt_lock, NULL, MUTEX_DEFAULT, NULL); avl_create(&ddt->ddt_tree, ddt_key_compare, sizeof (ddt_entry_t), offsetof(ddt_entry_t, dde_node)); avl_create(&ddt->ddt_repair_tree, ddt_key_compare, sizeof (ddt_entry_t), offsetof(ddt_entry_t, dde_node)); ddt->ddt_checksum = c; ddt->ddt_spa = spa; ddt->ddt_os = spa->spa_meta_objset; return (ddt); } static void ddt_table_free(ddt_t *ddt) { ASSERT0(avl_numnodes(&ddt->ddt_tree)); ASSERT0(avl_numnodes(&ddt->ddt_repair_tree)); avl_destroy(&ddt->ddt_tree); avl_destroy(&ddt->ddt_repair_tree); mutex_destroy(&ddt->ddt_lock); kmem_cache_free(ddt_cache, ddt); } void ddt_create(spa_t *spa) { spa->spa_dedup_checksum = ZIO_DEDUPCHECKSUM; for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { if (DDT_CHECKSUM_VALID(c)) spa->spa_ddt[c] = ddt_table_alloc(spa, c); } } int ddt_load(spa_t *spa) { int error; ddt_create(spa); error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DDT_STATS, sizeof (uint64_t), 1, &spa->spa_ddt_stat_object); if (error) return (error == ENOENT ? 0 : error); for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { if (!DDT_CHECKSUM_VALID(c)) continue; ddt_t *ddt = spa->spa_ddt[c]; for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { error = ddt_object_load(ddt, type, class); if (error != 0 && error != ENOENT) return (error); } } /* * Seed the cached histograms. */ memcpy(&ddt->ddt_histogram_cache, ddt->ddt_histogram, sizeof (ddt->ddt_histogram)); spa->spa_dedup_dspace = ~0ULL; + spa->spa_dedup_dsize = ~0ULL; } return (0); } void ddt_unload(spa_t *spa) { for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { if (spa->spa_ddt[c]) { ddt_table_free(spa->spa_ddt[c]); spa->spa_ddt[c] = NULL; } } } boolean_t ddt_class_contains(spa_t *spa, ddt_class_t max_class, const blkptr_t *bp) { ddt_t *ddt; ddt_key_t ddk; if (!BP_GET_DEDUP(bp)) return (B_FALSE); if (max_class == DDT_CLASS_UNIQUE) return (B_TRUE); ddt = spa->spa_ddt[BP_GET_CHECKSUM(bp)]; ddt_key_fill(&ddk, bp); for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class <= max_class; class++) { if (ddt_object_contains(ddt, type, class, &ddk) == 0) return (B_TRUE); } } return (B_FALSE); } ddt_entry_t * ddt_repair_start(ddt_t *ddt, const blkptr_t *bp) { ddt_key_t ddk; ddt_entry_t *dde; ddt_key_fill(&ddk, bp); dde = ddt_alloc(&ddk); for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { /* * We can only do repair if there are multiple copies * of the block. For anything in the UNIQUE class, * there's definitely only one copy, so don't even try. */ if (class != DDT_CLASS_UNIQUE && ddt_object_lookup(ddt, type, class, dde) == 0) return (dde); } } memset(dde->dde_phys, 0, sizeof (dde->dde_phys)); return (dde); } void ddt_repair_done(ddt_t *ddt, ddt_entry_t *dde) { avl_index_t where; ddt_enter(ddt); if (dde->dde_repair_abd != NULL && spa_writeable(ddt->ddt_spa) && avl_find(&ddt->ddt_repair_tree, dde, &where) == NULL) avl_insert(&ddt->ddt_repair_tree, dde, where); else ddt_free(dde); ddt_exit(ddt); } static void ddt_repair_entry_done(zio_t *zio) { ddt_entry_t *rdde = zio->io_private; ddt_free(rdde); } static void ddt_repair_entry(ddt_t *ddt, ddt_entry_t *dde, ddt_entry_t *rdde, zio_t *rio) { ddt_phys_t *ddp = dde->dde_phys; ddt_phys_t *rddp = rdde->dde_phys; ddt_key_t *ddk = &dde->dde_key; ddt_key_t *rddk = &rdde->dde_key; zio_t *zio; blkptr_t blk; zio = zio_null(rio, rio->io_spa, NULL, ddt_repair_entry_done, rdde, rio->io_flags); for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++, rddp++) { if (ddp->ddp_phys_birth == 0 || ddp->ddp_phys_birth != rddp->ddp_phys_birth || memcmp(ddp->ddp_dva, rddp->ddp_dva, sizeof (ddp->ddp_dva))) continue; ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk); zio_nowait(zio_rewrite(zio, zio->io_spa, 0, &blk, rdde->dde_repair_abd, DDK_GET_PSIZE(rddk), NULL, NULL, ZIO_PRIORITY_SYNC_WRITE, ZIO_DDT_CHILD_FLAGS(zio), NULL)); } zio_nowait(zio); } static void ddt_repair_table(ddt_t *ddt, zio_t *rio) { spa_t *spa = ddt->ddt_spa; ddt_entry_t *dde, *rdde_next, *rdde; avl_tree_t *t = &ddt->ddt_repair_tree; blkptr_t blk; if (spa_sync_pass(spa) > 1) return; ddt_enter(ddt); for (rdde = avl_first(t); rdde != NULL; rdde = rdde_next) { rdde_next = AVL_NEXT(t, rdde); avl_remove(&ddt->ddt_repair_tree, rdde); ddt_exit(ddt); ddt_bp_create(ddt->ddt_checksum, &rdde->dde_key, NULL, &blk); dde = ddt_repair_start(ddt, &blk); ddt_repair_entry(ddt, dde, rdde, rio); ddt_repair_done(ddt, dde); ddt_enter(ddt); } ddt_exit(ddt); } static void ddt_sync_entry(ddt_t *ddt, ddt_entry_t *dde, dmu_tx_t *tx, uint64_t txg) { dsl_pool_t *dp = ddt->ddt_spa->spa_dsl_pool; ddt_phys_t *ddp = dde->dde_phys; ddt_key_t *ddk = &dde->dde_key; ddt_type_t otype = dde->dde_type; ddt_type_t ntype = DDT_TYPE_DEFAULT; ddt_class_t oclass = dde->dde_class; ddt_class_t nclass; uint64_t total_refcnt = 0; ASSERT(dde->dde_flags & DDE_FLAG_LOADED); for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) { ASSERT3P(dde->dde_lead_zio[p], ==, NULL); if (ddp->ddp_phys_birth == 0) { ASSERT0(ddp->ddp_refcnt); continue; } if (p == DDT_PHYS_DITTO) { /* * Note, we no longer create DDT-DITTO blocks, but we * don't want to leak any written by older software. */ ddt_phys_free(ddt, ddk, ddp, txg); continue; } if (ddp->ddp_refcnt == 0) ddt_phys_free(ddt, ddk, ddp, txg); total_refcnt += ddp->ddp_refcnt; } /* We do not create new DDT-DITTO blocks. */ ASSERT0(dde->dde_phys[DDT_PHYS_DITTO].ddp_phys_birth); if (total_refcnt > 1) nclass = DDT_CLASS_DUPLICATE; else nclass = DDT_CLASS_UNIQUE; if (otype != DDT_TYPES && (otype != ntype || oclass != nclass || total_refcnt == 0)) { VERIFY0(ddt_object_remove(ddt, otype, oclass, ddk, tx)); ASSERT3U( ddt_object_contains(ddt, otype, oclass, ddk), ==, ENOENT); } if (total_refcnt != 0) { dde->dde_type = ntype; dde->dde_class = nclass; ddt_stat_update(ddt, dde, 0); if (!ddt_object_exists(ddt, ntype, nclass)) ddt_object_create(ddt, ntype, nclass, tx); VERIFY0(ddt_object_update(ddt, ntype, nclass, dde, tx)); /* * If the class changes, the order that we scan this bp * changes. If it decreases, we could miss it, so * scan it right now. (This covers both class changing * while we are doing ddt_walk(), and when we are * traversing.) */ if (nclass < oclass) { dsl_scan_ddt_entry(dp->dp_scan, ddt->ddt_checksum, dde, tx); } } } static void ddt_sync_table(ddt_t *ddt, dmu_tx_t *tx, uint64_t txg) { spa_t *spa = ddt->ddt_spa; ddt_entry_t *dde; void *cookie = NULL; if (avl_numnodes(&ddt->ddt_tree) == 0) return; ASSERT3U(spa->spa_uberblock.ub_version, >=, SPA_VERSION_DEDUP); if (spa->spa_ddt_stat_object == 0) { spa->spa_ddt_stat_object = zap_create_link(ddt->ddt_os, DMU_OT_DDT_STATS, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DDT_STATS, tx); } while ((dde = avl_destroy_nodes(&ddt->ddt_tree, &cookie)) != NULL) { ddt_sync_entry(ddt, dde, tx, txg); ddt_free(dde); } for (ddt_type_t type = 0; type < DDT_TYPES; type++) { uint64_t add, count = 0; for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { if (ddt_object_exists(ddt, type, class)) { ddt_object_sync(ddt, type, class, tx); VERIFY0(ddt_object_count(ddt, type, class, &add)); count += add; } } for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { if (count == 0 && ddt_object_exists(ddt, type, class)) ddt_object_destroy(ddt, type, class, tx); } } memcpy(&ddt->ddt_histogram_cache, ddt->ddt_histogram, sizeof (ddt->ddt_histogram)); spa->spa_dedup_dspace = ~0ULL; + spa->spa_dedup_dsize = ~0ULL; } void ddt_sync(spa_t *spa, uint64_t txg) { dsl_scan_t *scn = spa->spa_dsl_pool->dp_scan; dmu_tx_t *tx; zio_t *rio; ASSERT3U(spa_syncing_txg(spa), ==, txg); tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg); rio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SELF_HEAL); /* * This function may cause an immediate scan of ddt blocks (see * the comment above dsl_scan_ddt() for details). We set the * scan's root zio here so that we can wait for any scan IOs in * addition to the regular ddt IOs. */ ASSERT3P(scn->scn_zio_root, ==, NULL); scn->scn_zio_root = rio; for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { ddt_t *ddt = spa->spa_ddt[c]; if (ddt == NULL) continue; ddt_sync_table(ddt, tx, txg); ddt_repair_table(ddt, rio); } (void) zio_wait(rio); scn->scn_zio_root = NULL; dmu_tx_commit(tx); } int ddt_walk(spa_t *spa, ddt_bookmark_t *ddb, ddt_entry_t *dde) { do { do { do { ddt_t *ddt = spa->spa_ddt[ddb->ddb_checksum]; if (ddt == NULL) continue; int error = ENOENT; if (ddt_object_exists(ddt, ddb->ddb_type, ddb->ddb_class)) { error = ddt_object_walk(ddt, ddb->ddb_type, ddb->ddb_class, &ddb->ddb_cursor, dde); } dde->dde_type = ddb->ddb_type; dde->dde_class = ddb->ddb_class; if (error == 0) return (0); if (error != ENOENT) return (error); ddb->ddb_cursor = 0; } while (++ddb->ddb_checksum < ZIO_CHECKSUM_FUNCTIONS); ddb->ddb_checksum = 0; } while (++ddb->ddb_type < DDT_TYPES); ddb->ddb_type = 0; } while (++ddb->ddb_class < DDT_CLASSES); return (SET_ERROR(ENOENT)); } /* * This function is used by Block Cloning (brt.c) to increase reference * counter for the DDT entry if the block is already in DDT. * * Return false if the block, despite having the D bit set, is not present * in the DDT. Currently this is not possible but might be in the future. * See the comment below. */ boolean_t ddt_addref(spa_t *spa, const blkptr_t *bp) { ddt_t *ddt; ddt_entry_t *dde; boolean_t result; spa_config_enter(spa, SCL_ZIO, FTAG, RW_READER); ddt = ddt_select(spa, bp); ddt_enter(ddt); dde = ddt_lookup(ddt, bp, B_TRUE); - ASSERT3P(dde, !=, NULL); + + /* Can be NULL if the entry for this block was pruned. */ + if (dde == NULL) { + ddt_exit(ddt); + spa_config_exit(spa, SCL_ZIO, FTAG); + return (B_FALSE); + } if (dde->dde_type < DDT_TYPES) { ddt_phys_t *ddp; ASSERT3S(dde->dde_class, <, DDT_CLASSES); ddp = &dde->dde_phys[BP_GET_NDVAS(bp)]; /* * This entry already existed (dde_type is real), so it must * have refcnt >0 at the start of this txg. We are called from * brt_pending_apply(), before frees are issued, so the refcnt * can't be lowered yet. Therefore, it must be >0. We assert * this because if the order of BRT and DDT interactions were * ever to change and the refcnt was ever zero here, then * likely further action is required to fill out the DDT entry, * and this is a place that is likely to be missed in testing. */ ASSERT3U(ddp->ddp_refcnt, >, 0); ddt_phys_addref(ddp); result = B_TRUE; } else { /* * At the time of implementating this if the block has the * DEDUP flag set it must exist in the DEDUP table, but * there are many advocates that want ability to remove * entries from DDT with refcnt=1. If this will happen, * we may have a block with the DEDUP set, but which doesn't * have a corresponding entry in the DDT. Be ready. */ ASSERT3S(dde->dde_class, ==, DDT_CLASSES); ddt_remove(ddt, dde); result = B_FALSE; } ddt_exit(ddt); spa_config_exit(spa, SCL_ZIO, FTAG); return (result); } ZFS_MODULE_PARAM(zfs_dedup, zfs_dedup_, prefetch, INT, ZMOD_RW, "Enable prefetching dedup-ed blks"); diff --git a/module/zfs/ddt_stats.c b/module/zfs/ddt_stats.c index af5365a1d114..39b4edfc0f6a 100644 --- a/module/zfs/ddt_stats.c +++ b/module/zfs/ddt_stats.c @@ -1,212 +1,250 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2016 by Delphix. All rights reserved. * Copyright (c) 2022 by Pawel Jakub Dawidek * Copyright (c) 2023, Klara Inc. */ #include #include #include #include #include static void ddt_stat_generate(ddt_t *ddt, ddt_entry_t *dde, ddt_stat_t *dds) { spa_t *spa = ddt->ddt_spa; ddt_phys_t *ddp = dde->dde_phys; ddt_key_t *ddk = &dde->dde_key; uint64_t lsize = DDK_GET_LSIZE(ddk); uint64_t psize = DDK_GET_PSIZE(ddk); memset(dds, 0, sizeof (*dds)); for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) { uint64_t dsize = 0; uint64_t refcnt = ddp->ddp_refcnt; if (ddp->ddp_phys_birth == 0) continue; int ndvas = DDK_GET_CRYPT(&dde->dde_key) ? SPA_DVAS_PER_BP - 1 : SPA_DVAS_PER_BP; for (int d = 0; d < ndvas; d++) dsize += dva_get_dsize_sync(spa, &ddp->ddp_dva[d]); dds->dds_blocks += 1; dds->dds_lsize += lsize; dds->dds_psize += psize; dds->dds_dsize += dsize; dds->dds_ref_blocks += refcnt; dds->dds_ref_lsize += lsize * refcnt; dds->dds_ref_psize += psize * refcnt; dds->dds_ref_dsize += dsize * refcnt; } } void ddt_stat_add(ddt_stat_t *dst, const ddt_stat_t *src, uint64_t neg) { const uint64_t *s = (const uint64_t *)src; uint64_t *d = (uint64_t *)dst; uint64_t *d_end = (uint64_t *)(dst + 1); ASSERT(neg == 0 || neg == -1ULL); /* add or subtract */ for (int i = 0; i < d_end - d; i++) d[i] += (s[i] ^ neg) - neg; } void ddt_stat_update(ddt_t *ddt, ddt_entry_t *dde, uint64_t neg) { ddt_stat_t dds; ddt_histogram_t *ddh; int bucket; ddt_stat_generate(ddt, dde, &dds); bucket = highbit64(dds.dds_ref_blocks) - 1; ASSERT3U(bucket, >=, 0); ddh = &ddt->ddt_histogram[dde->dde_type][dde->dde_class]; ddt_stat_add(&ddh->ddh_stat[bucket], &dds, neg); } void ddt_histogram_add(ddt_histogram_t *dst, const ddt_histogram_t *src) { for (int h = 0; h < 64; h++) ddt_stat_add(&dst->ddh_stat[h], &src->ddh_stat[h], 0); } void ddt_histogram_stat(ddt_stat_t *dds, const ddt_histogram_t *ddh) { memset(dds, 0, sizeof (*dds)); for (int h = 0; h < 64; h++) ddt_stat_add(dds, &ddh->ddh_stat[h], 0); } boolean_t ddt_histogram_empty(const ddt_histogram_t *ddh) { const uint64_t *s = (const uint64_t *)ddh; const uint64_t *s_end = (const uint64_t *)(ddh + 1); while (s < s_end) if (*s++ != 0) return (B_FALSE); return (B_TRUE); } void ddt_get_dedup_object_stats(spa_t *spa, ddt_object_t *ddo_total) { - /* Sum the statistics we cached in ddt_object_sync(). */ + memset(ddo_total, 0, sizeof (*ddo_total)); + for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { ddt_t *ddt = spa->spa_ddt[c]; if (!ddt) continue; for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { + dmu_object_info_t doi; + uint64_t cnt; + int err; + + /* + * These stats were originally calculated + * during ddt_object_load(). + */ + + err = ddt_object_info(ddt, type, class, &doi); + if (err != 0) + continue; + + err = ddt_object_count(ddt, type, class, &cnt); + if (err != 0) + continue; + ddt_object_t *ddo = &ddt->ddt_object_stats[type][class]; + + ddo->ddo_count = cnt; + ddo->ddo_dspace = + doi.doi_physical_blocks_512 << 9; + ddo->ddo_mspace = doi.doi_fill_count * + doi.doi_data_block_size; + ddo_total->ddo_count += ddo->ddo_count; ddo_total->ddo_dspace += ddo->ddo_dspace; ddo_total->ddo_mspace += ddo->ddo_mspace; } } } - /* ... and compute the averages. */ - if (ddo_total->ddo_count != 0) { - ddo_total->ddo_dspace /= ddo_total->ddo_count; - ddo_total->ddo_mspace /= ddo_total->ddo_count; - } + /* + * This returns raw counts (not averages). One of the consumers, + * print_dedup_stats(), historically has expected raw counts. + */ + + spa->spa_dedup_dsize = ddo_total->ddo_dspace; +} + +uint64_t +ddt_get_ddt_dsize(spa_t *spa) +{ + ddt_object_t ddo_total; + + /* recalculate after each txg sync */ + if (spa->spa_dedup_dsize == ~0ULL) + ddt_get_dedup_object_stats(spa, &ddo_total); + + return (spa->spa_dedup_dsize); } void ddt_get_dedup_histogram(spa_t *spa, ddt_histogram_t *ddh) { for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) { ddt_t *ddt = spa->spa_ddt[c]; if (!ddt) continue; for (ddt_type_t type = 0; type < DDT_TYPES; type++) { for (ddt_class_t class = 0; class < DDT_CLASSES; class++) { ddt_histogram_add(ddh, &ddt->ddt_histogram_cache[type][class]); } } } } void ddt_get_dedup_stats(spa_t *spa, ddt_stat_t *dds_total) { ddt_histogram_t *ddh_total; ddh_total = kmem_zalloc(sizeof (ddt_histogram_t), KM_SLEEP); ddt_get_dedup_histogram(spa, ddh_total); ddt_histogram_stat(dds_total, ddh_total); kmem_free(ddh_total, sizeof (ddt_histogram_t)); } uint64_t ddt_get_dedup_dspace(spa_t *spa) { ddt_stat_t dds_total; if (spa->spa_dedup_dspace != ~0ULL) return (spa->spa_dedup_dspace); memset(&dds_total, 0, sizeof (ddt_stat_t)); /* Calculate and cache the stats */ ddt_get_dedup_stats(spa, &dds_total); spa->spa_dedup_dspace = dds_total.dds_ref_dsize - dds_total.dds_dsize; return (spa->spa_dedup_dspace); } uint64_t ddt_get_pool_dedup_ratio(spa_t *spa) { ddt_stat_t dds_total = { 0 }; ddt_get_dedup_stats(spa, &dds_total); if (dds_total.dds_dsize == 0) return (100); return (dds_total.dds_ref_dsize * 100 / dds_total.dds_dsize); } diff --git a/module/zfs/spa.c b/module/zfs/spa.c index 638572996c3a..1095c0af37f0 100644 --- a/module/zfs/spa.c +++ b/module/zfs/spa.c @@ -1,10972 +1,10986 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright (c) 2018, Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. * Copyright 2013 Saso Kiselkov. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2016 Toomas Soome * Copyright (c) 2016 Actifio, Inc. All rights reserved. * Copyright 2018 Joyent, Inc. * Copyright (c) 2017, 2019, Datto Inc. All rights reserved. * Copyright 2017 Joyent, Inc. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2021, Colm Buckley * Copyright (c) 2023 Hewlett Packard Enterprise Development LP. * Copyright (c) 2024, Klara Inc. */ /* * SPA: Storage Pool Allocator * * This file contains all the routines used when modifying on-disk SPA state. * This includes opening, importing, destroying, exporting a pool, and syncing a * pool. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef _KERNEL #include #include #include #include #include #endif /* _KERNEL */ #include "zfs_prop.h" #include "zfs_comutil.h" #include /* * spa_thread() existed on Illumos as a parent thread for the various worker * threads that actually run the pool, as a way to both reference the entire * pool work as a single object, and to share properties like scheduling * options. It has not yet been adapted to Linux or FreeBSD. This define is * used to mark related parts of the code to make things easier for the reader, * and to compile this code out. It can be removed when someone implements it, * moves it to some Illumos-specific place, or removes it entirely. */ #undef HAVE_SPA_THREAD /* * The "System Duty Cycle" scheduling class is an Illumos feature to help * prevent CPU-intensive kernel threads from affecting latency on interactive * threads. It doesn't exist on Linux or FreeBSD, so the supporting code is * gated behind a define. On Illumos SDC depends on spa_thread(), but * spa_thread() also has other uses, so this is a separate define. */ #undef HAVE_SYSDC /* * The interval, in seconds, at which failed configuration cache file writes * should be retried. */ int zfs_ccw_retry_interval = 300; typedef enum zti_modes { ZTI_MODE_FIXED, /* value is # of threads (min 1) */ ZTI_MODE_SCALE, /* Taskqs scale with CPUs. */ ZTI_MODE_SYNC, /* sync thread assigned */ ZTI_MODE_NULL, /* don't create a taskq */ ZTI_NMODES } zti_modes_t; #define ZTI_P(n, q) { ZTI_MODE_FIXED, (n), (q) } #define ZTI_PCT(n) { ZTI_MODE_ONLINE_PERCENT, (n), 1 } #define ZTI_SCALE { ZTI_MODE_SCALE, 0, 1 } #define ZTI_SYNC { ZTI_MODE_SYNC, 0, 1 } #define ZTI_NULL { ZTI_MODE_NULL, 0, 0 } #define ZTI_N(n) ZTI_P(n, 1) #define ZTI_ONE ZTI_N(1) typedef struct zio_taskq_info { zti_modes_t zti_mode; uint_t zti_value; uint_t zti_count; } zio_taskq_info_t; static const char *const zio_taskq_types[ZIO_TASKQ_TYPES] = { "iss", "iss_h", "int", "int_h" }; /* * This table defines the taskq settings for each ZFS I/O type. When * initializing a pool, we use this table to create an appropriately sized * taskq. Some operations are low volume and therefore have a small, static * number of threads assigned to their taskqs using the ZTI_N(#) or ZTI_ONE * macros. Other operations process a large amount of data; the ZTI_SCALE * macro causes us to create a taskq oriented for throughput. Some operations * are so high frequency and short-lived that the taskq itself can become a * point of lock contention. The ZTI_P(#, #) macro indicates that we need an * additional degree of parallelism specified by the number of threads per- * taskq and the number of taskqs; when dispatching an event in this case, the * particular taskq is chosen at random. ZTI_SCALE uses a number of taskqs * that scales with the number of CPUs. * * The different taskq priorities are to handle the different contexts (issue * and interrupt) and then to reserve threads for high priority I/Os that * need to be handled with minimum delay. Illumos taskq has unfair TQ_FRONT * implementation, so separate high priority threads are used there. */ static zio_taskq_info_t zio_taskqs[ZIO_TYPES][ZIO_TASKQ_TYPES] = { /* ISSUE ISSUE_HIGH INTR INTR_HIGH */ { ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* NULL */ { ZTI_N(8), ZTI_NULL, ZTI_SCALE, ZTI_NULL }, /* READ */ #ifdef illumos { ZTI_SYNC, ZTI_N(5), ZTI_SCALE, ZTI_N(5) }, /* WRITE */ #else { ZTI_SYNC, ZTI_NULL, ZTI_SCALE, ZTI_NULL }, /* WRITE */ #endif { ZTI_SCALE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* FREE */ { ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* CLAIM */ { ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* FLUSH */ { ZTI_N(4), ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* TRIM */ }; static void spa_sync_version(void *arg, dmu_tx_t *tx); static void spa_sync_props(void *arg, dmu_tx_t *tx); static boolean_t spa_has_active_shared_spare(spa_t *spa); static int spa_load_impl(spa_t *spa, spa_import_type_t type, const char **ereport); static void spa_vdev_resilver_done(spa_t *spa); /* * Percentage of all CPUs that can be used by the metaslab preload taskq. */ static uint_t metaslab_preload_pct = 50; static uint_t zio_taskq_batch_pct = 80; /* 1 thread per cpu in pset */ static uint_t zio_taskq_batch_tpq; /* threads per taskq */ #ifdef HAVE_SYSDC static const boolean_t zio_taskq_sysdc = B_TRUE; /* use SDC scheduling class */ static const uint_t zio_taskq_basedc = 80; /* base duty cycle */ #endif #ifdef HAVE_SPA_THREAD static const boolean_t spa_create_process = B_TRUE; /* no process => no sysdc */ #endif static uint_t zio_taskq_write_tpq = 16; /* * Report any spa_load_verify errors found, but do not fail spa_load. * This is used by zdb to analyze non-idle pools. */ boolean_t spa_load_verify_dryrun = B_FALSE; /* * Allow read spacemaps in case of readonly import (spa_mode == SPA_MODE_READ). * This is used by zdb for spacemaps verification. */ boolean_t spa_mode_readable_spacemaps = B_FALSE; /* * This (illegal) pool name is used when temporarily importing a spa_t in order * to get the vdev stats associated with the imported devices. */ #define TRYIMPORT_NAME "$import" /* * For debugging purposes: print out vdev tree during pool import. */ static int spa_load_print_vdev_tree = B_FALSE; /* * A non-zero value for zfs_max_missing_tvds means that we allow importing * pools with missing top-level vdevs. This is strictly intended for advanced * pool recovery cases since missing data is almost inevitable. Pools with * missing devices can only be imported read-only for safety reasons, and their * fail-mode will be automatically set to "continue". * * With 1 missing vdev we should be able to import the pool and mount all * datasets. User data that was not modified after the missing device has been * added should be recoverable. This means that snapshots created prior to the * addition of that device should be completely intact. * * With 2 missing vdevs, some datasets may fail to mount since there are * dataset statistics that are stored as regular metadata. Some data might be * recoverable if those vdevs were added recently. * * With 3 or more missing vdevs, the pool is severely damaged and MOS entries * may be missing entirely. Chances of data recovery are very low. Note that * there are also risks of performing an inadvertent rewind as we might be * missing all the vdevs with the latest uberblocks. */ uint64_t zfs_max_missing_tvds = 0; /* * The parameters below are similar to zfs_max_missing_tvds but are only * intended for a preliminary open of the pool with an untrusted config which * might be incomplete or out-dated. * * We are more tolerant for pools opened from a cachefile since we could have * an out-dated cachefile where a device removal was not registered. * We could have set the limit arbitrarily high but in the case where devices * are really missing we would want to return the proper error codes; we chose * SPA_DVAS_PER_BP - 1 so that some copies of the MOS would still be available * and we get a chance to retrieve the trusted config. */ uint64_t zfs_max_missing_tvds_cachefile = SPA_DVAS_PER_BP - 1; /* * In the case where config was assembled by scanning device paths (/dev/dsks * by default) we are less tolerant since all the existing devices should have * been detected and we want spa_load to return the right error codes. */ uint64_t zfs_max_missing_tvds_scan = 0; /* * Debugging aid that pauses spa_sync() towards the end. */ static const boolean_t zfs_pause_spa_sync = B_FALSE; /* * Variables to indicate the livelist condense zthr func should wait at certain * points for the livelist to be removed - used to test condense/destroy races */ static int zfs_livelist_condense_zthr_pause = 0; static int zfs_livelist_condense_sync_pause = 0; /* * Variables to track whether or not condense cancellation has been * triggered in testing. */ static int zfs_livelist_condense_sync_cancel = 0; static int zfs_livelist_condense_zthr_cancel = 0; /* * Variable to track whether or not extra ALLOC blkptrs were added to a * livelist entry while it was being condensed (caused by the way we track * remapped blkptrs in dbuf_remap_impl) */ static int zfs_livelist_condense_new_alloc = 0; /* * ========================================================================== * SPA properties routines * ========================================================================== */ /* * Add a (source=src, propname=propval) list to an nvlist. */ static void spa_prop_add_list(nvlist_t *nvl, zpool_prop_t prop, const char *strval, uint64_t intval, zprop_source_t src) { const char *propname = zpool_prop_to_name(prop); nvlist_t *propval; propval = fnvlist_alloc(); fnvlist_add_uint64(propval, ZPROP_SOURCE, src); if (strval != NULL) fnvlist_add_string(propval, ZPROP_VALUE, strval); else fnvlist_add_uint64(propval, ZPROP_VALUE, intval); fnvlist_add_nvlist(nvl, propname, propval); nvlist_free(propval); } /* * Add a user property (source=src, propname=propval) to an nvlist. */ static void spa_prop_add_user(nvlist_t *nvl, const char *propname, char *strval, zprop_source_t src) { nvlist_t *propval; VERIFY(nvlist_alloc(&propval, NV_UNIQUE_NAME, KM_SLEEP) == 0); VERIFY(nvlist_add_uint64(propval, ZPROP_SOURCE, src) == 0); VERIFY(nvlist_add_string(propval, ZPROP_VALUE, strval) == 0); VERIFY(nvlist_add_nvlist(nvl, propname, propval) == 0); nvlist_free(propval); } /* * Get property values from the spa configuration. */ static void spa_prop_get_config(spa_t *spa, nvlist_t **nvp) { vdev_t *rvd = spa->spa_root_vdev; dsl_pool_t *pool = spa->spa_dsl_pool; uint64_t size, alloc, cap, version; const zprop_source_t src = ZPROP_SRC_NONE; spa_config_dirent_t *dp; metaslab_class_t *mc = spa_normal_class(spa); ASSERT(MUTEX_HELD(&spa->spa_props_lock)); if (rvd != NULL) { alloc = metaslab_class_get_alloc(mc); alloc += metaslab_class_get_alloc(spa_special_class(spa)); alloc += metaslab_class_get_alloc(spa_dedup_class(spa)); alloc += metaslab_class_get_alloc(spa_embedded_log_class(spa)); size = metaslab_class_get_space(mc); size += metaslab_class_get_space(spa_special_class(spa)); size += metaslab_class_get_space(spa_dedup_class(spa)); size += metaslab_class_get_space(spa_embedded_log_class(spa)); spa_prop_add_list(*nvp, ZPOOL_PROP_NAME, spa_name(spa), 0, src); spa_prop_add_list(*nvp, ZPOOL_PROP_SIZE, NULL, size, src); spa_prop_add_list(*nvp, ZPOOL_PROP_ALLOCATED, NULL, alloc, src); spa_prop_add_list(*nvp, ZPOOL_PROP_FREE, NULL, size - alloc, src); spa_prop_add_list(*nvp, ZPOOL_PROP_CHECKPOINT, NULL, spa->spa_checkpoint_info.sci_dspace, src); spa_prop_add_list(*nvp, ZPOOL_PROP_FRAGMENTATION, NULL, metaslab_class_fragmentation(mc), src); spa_prop_add_list(*nvp, ZPOOL_PROP_EXPANDSZ, NULL, metaslab_class_expandable_space(mc), src); spa_prop_add_list(*nvp, ZPOOL_PROP_READONLY, NULL, (spa_mode(spa) == SPA_MODE_READ), src); cap = (size == 0) ? 0 : (alloc * 100 / size); spa_prop_add_list(*nvp, ZPOOL_PROP_CAPACITY, NULL, cap, src); spa_prop_add_list(*nvp, ZPOOL_PROP_DEDUPRATIO, NULL, ddt_get_pool_dedup_ratio(spa), src); spa_prop_add_list(*nvp, ZPOOL_PROP_BCLONEUSED, NULL, brt_get_used(spa), src); spa_prop_add_list(*nvp, ZPOOL_PROP_BCLONESAVED, NULL, brt_get_saved(spa), src); spa_prop_add_list(*nvp, ZPOOL_PROP_BCLONERATIO, NULL, brt_get_ratio(spa), src); + spa_prop_add_list(*nvp, ZPOOL_PROP_DEDUP_TABLE_SIZE, NULL, + ddt_get_ddt_dsize(spa), src); + spa_prop_add_list(*nvp, ZPOOL_PROP_HEALTH, NULL, rvd->vdev_state, src); version = spa_version(spa); if (version == zpool_prop_default_numeric(ZPOOL_PROP_VERSION)) { spa_prop_add_list(*nvp, ZPOOL_PROP_VERSION, NULL, version, ZPROP_SRC_DEFAULT); } else { spa_prop_add_list(*nvp, ZPOOL_PROP_VERSION, NULL, version, ZPROP_SRC_LOCAL); } spa_prop_add_list(*nvp, ZPOOL_PROP_LOAD_GUID, NULL, spa_load_guid(spa), src); } if (pool != NULL) { /* * The $FREE directory was introduced in SPA_VERSION_DEADLISTS, * when opening pools before this version freedir will be NULL. */ if (pool->dp_free_dir != NULL) { spa_prop_add_list(*nvp, ZPOOL_PROP_FREEING, NULL, dsl_dir_phys(pool->dp_free_dir)->dd_used_bytes, src); } else { spa_prop_add_list(*nvp, ZPOOL_PROP_FREEING, NULL, 0, src); } if (pool->dp_leak_dir != NULL) { spa_prop_add_list(*nvp, ZPOOL_PROP_LEAKED, NULL, dsl_dir_phys(pool->dp_leak_dir)->dd_used_bytes, src); } else { spa_prop_add_list(*nvp, ZPOOL_PROP_LEAKED, NULL, 0, src); } } spa_prop_add_list(*nvp, ZPOOL_PROP_GUID, NULL, spa_guid(spa), src); if (spa->spa_comment != NULL) { spa_prop_add_list(*nvp, ZPOOL_PROP_COMMENT, spa->spa_comment, 0, ZPROP_SRC_LOCAL); } if (spa->spa_compatibility != NULL) { spa_prop_add_list(*nvp, ZPOOL_PROP_COMPATIBILITY, spa->spa_compatibility, 0, ZPROP_SRC_LOCAL); } if (spa->spa_root != NULL) spa_prop_add_list(*nvp, ZPOOL_PROP_ALTROOT, spa->spa_root, 0, ZPROP_SRC_LOCAL); if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS)) { spa_prop_add_list(*nvp, ZPOOL_PROP_MAXBLOCKSIZE, NULL, MIN(zfs_max_recordsize, SPA_MAXBLOCKSIZE), ZPROP_SRC_NONE); } else { spa_prop_add_list(*nvp, ZPOOL_PROP_MAXBLOCKSIZE, NULL, SPA_OLD_MAXBLOCKSIZE, ZPROP_SRC_NONE); } if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE)) { spa_prop_add_list(*nvp, ZPOOL_PROP_MAXDNODESIZE, NULL, DNODE_MAX_SIZE, ZPROP_SRC_NONE); } else { spa_prop_add_list(*nvp, ZPOOL_PROP_MAXDNODESIZE, NULL, DNODE_MIN_SIZE, ZPROP_SRC_NONE); } if ((dp = list_head(&spa->spa_config_list)) != NULL) { if (dp->scd_path == NULL) { spa_prop_add_list(*nvp, ZPOOL_PROP_CACHEFILE, "none", 0, ZPROP_SRC_LOCAL); } else if (strcmp(dp->scd_path, spa_config_path) != 0) { spa_prop_add_list(*nvp, ZPOOL_PROP_CACHEFILE, dp->scd_path, 0, ZPROP_SRC_LOCAL); } } } /* * Get zpool property values. */ int spa_prop_get(spa_t *spa, nvlist_t **nvp) { objset_t *mos = spa->spa_meta_objset; zap_cursor_t zc; zap_attribute_t za; dsl_pool_t *dp; int err; err = nvlist_alloc(nvp, NV_UNIQUE_NAME, KM_SLEEP); if (err) return (err); dp = spa_get_dsl(spa); dsl_pool_config_enter(dp, FTAG); mutex_enter(&spa->spa_props_lock); /* * Get properties from the spa config. */ spa_prop_get_config(spa, nvp); /* If no pool property object, no more prop to get. */ if (mos == NULL || spa->spa_pool_props_object == 0) goto out; /* * Get properties from the MOS pool property object. */ for (zap_cursor_init(&zc, mos, spa->spa_pool_props_object); (err = zap_cursor_retrieve(&zc, &za)) == 0; zap_cursor_advance(&zc)) { uint64_t intval = 0; char *strval = NULL; zprop_source_t src = ZPROP_SRC_DEFAULT; zpool_prop_t prop; if ((prop = zpool_name_to_prop(za.za_name)) == ZPOOL_PROP_INVAL && !zfs_prop_user(za.za_name)) continue; switch (za.za_integer_length) { case 8: /* integer property */ if (za.za_first_integer != zpool_prop_default_numeric(prop)) src = ZPROP_SRC_LOCAL; if (prop == ZPOOL_PROP_BOOTFS) { dsl_dataset_t *ds = NULL; err = dsl_dataset_hold_obj(dp, za.za_first_integer, FTAG, &ds); if (err != 0) break; strval = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP); dsl_dataset_name(ds, strval); dsl_dataset_rele(ds, FTAG); } else { strval = NULL; intval = za.za_first_integer; } spa_prop_add_list(*nvp, prop, strval, intval, src); if (strval != NULL) kmem_free(strval, ZFS_MAX_DATASET_NAME_LEN); break; case 1: /* string property */ strval = kmem_alloc(za.za_num_integers, KM_SLEEP); err = zap_lookup(mos, spa->spa_pool_props_object, za.za_name, 1, za.za_num_integers, strval); if (err) { kmem_free(strval, za.za_num_integers); break; } if (prop != ZPOOL_PROP_INVAL) { spa_prop_add_list(*nvp, prop, strval, 0, src); } else { src = ZPROP_SRC_LOCAL; spa_prop_add_user(*nvp, za.za_name, strval, src); } kmem_free(strval, za.za_num_integers); break; default: break; } } zap_cursor_fini(&zc); out: mutex_exit(&spa->spa_props_lock); dsl_pool_config_exit(dp, FTAG); if (err && err != ENOENT) { nvlist_free(*nvp); *nvp = NULL; return (err); } return (0); } /* * Validate the given pool properties nvlist and modify the list * for the property values to be set. */ static int spa_prop_validate(spa_t *spa, nvlist_t *props) { nvpair_t *elem; int error = 0, reset_bootfs = 0; uint64_t objnum = 0; boolean_t has_feature = B_FALSE; elem = NULL; while ((elem = nvlist_next_nvpair(props, elem)) != NULL) { uint64_t intval; const char *strval, *slash, *check, *fname; const char *propname = nvpair_name(elem); zpool_prop_t prop = zpool_name_to_prop(propname); switch (prop) { case ZPOOL_PROP_INVAL: /* * Sanitize the input. */ if (zfs_prop_user(propname)) { if (strlen(propname) >= ZAP_MAXNAMELEN) { error = SET_ERROR(ENAMETOOLONG); break; } if (strlen(fnvpair_value_string(elem)) >= ZAP_MAXVALUELEN) { error = SET_ERROR(E2BIG); break; } } else if (zpool_prop_feature(propname)) { if (nvpair_type(elem) != DATA_TYPE_UINT64) { error = SET_ERROR(EINVAL); break; } if (nvpair_value_uint64(elem, &intval) != 0) { error = SET_ERROR(EINVAL); break; } if (intval != 0) { error = SET_ERROR(EINVAL); break; } fname = strchr(propname, '@') + 1; if (zfeature_lookup_name(fname, NULL) != 0) { error = SET_ERROR(EINVAL); break; } has_feature = B_TRUE; } else { error = SET_ERROR(EINVAL); break; } break; case ZPOOL_PROP_VERSION: error = nvpair_value_uint64(elem, &intval); if (!error && (intval < spa_version(spa) || intval > SPA_VERSION_BEFORE_FEATURES || has_feature)) error = SET_ERROR(EINVAL); break; + case ZPOOL_PROP_DEDUP_TABLE_QUOTA: + error = nvpair_value_uint64(elem, &intval); + break; + case ZPOOL_PROP_DELEGATION: case ZPOOL_PROP_AUTOREPLACE: case ZPOOL_PROP_LISTSNAPS: case ZPOOL_PROP_AUTOEXPAND: case ZPOOL_PROP_AUTOTRIM: error = nvpair_value_uint64(elem, &intval); if (!error && intval > 1) error = SET_ERROR(EINVAL); break; case ZPOOL_PROP_MULTIHOST: error = nvpair_value_uint64(elem, &intval); if (!error && intval > 1) error = SET_ERROR(EINVAL); if (!error) { uint32_t hostid = zone_get_hostid(NULL); if (hostid) spa->spa_hostid = hostid; else error = SET_ERROR(ENOTSUP); } break; case ZPOOL_PROP_BOOTFS: /* * If the pool version is less than SPA_VERSION_BOOTFS, * or the pool is still being created (version == 0), * the bootfs property cannot be set. */ if (spa_version(spa) < SPA_VERSION_BOOTFS) { error = SET_ERROR(ENOTSUP); break; } /* * Make sure the vdev config is bootable */ if (!vdev_is_bootable(spa->spa_root_vdev)) { error = SET_ERROR(ENOTSUP); break; } reset_bootfs = 1; error = nvpair_value_string(elem, &strval); if (!error) { objset_t *os; if (strval == NULL || strval[0] == '\0') { objnum = zpool_prop_default_numeric( ZPOOL_PROP_BOOTFS); break; } error = dmu_objset_hold(strval, FTAG, &os); if (error != 0) break; /* Must be ZPL. */ if (dmu_objset_type(os) != DMU_OST_ZFS) { error = SET_ERROR(ENOTSUP); } else { objnum = dmu_objset_id(os); } dmu_objset_rele(os, FTAG); } break; case ZPOOL_PROP_FAILUREMODE: error = nvpair_value_uint64(elem, &intval); if (!error && intval > ZIO_FAILURE_MODE_PANIC) error = SET_ERROR(EINVAL); /* * This is a special case which only occurs when * the pool has completely failed. This allows * the user to change the in-core failmode property * without syncing it out to disk (I/Os might * currently be blocked). We do this by returning * EIO to the caller (spa_prop_set) to trick it * into thinking we encountered a property validation * error. */ if (!error && spa_suspended(spa)) { spa->spa_failmode = intval; error = SET_ERROR(EIO); } break; case ZPOOL_PROP_CACHEFILE: if ((error = nvpair_value_string(elem, &strval)) != 0) break; if (strval[0] == '\0') break; if (strcmp(strval, "none") == 0) break; if (strval[0] != '/') { error = SET_ERROR(EINVAL); break; } slash = strrchr(strval, '/'); ASSERT(slash != NULL); if (slash[1] == '\0' || strcmp(slash, "/.") == 0 || strcmp(slash, "/..") == 0) error = SET_ERROR(EINVAL); break; case ZPOOL_PROP_COMMENT: if ((error = nvpair_value_string(elem, &strval)) != 0) break; for (check = strval; *check != '\0'; check++) { if (!isprint(*check)) { error = SET_ERROR(EINVAL); break; } } if (strlen(strval) > ZPROP_MAX_COMMENT) error = SET_ERROR(E2BIG); break; default: break; } if (error) break; } (void) nvlist_remove_all(props, zpool_prop_to_name(ZPOOL_PROP_DEDUPDITTO)); if (!error && reset_bootfs) { error = nvlist_remove(props, zpool_prop_to_name(ZPOOL_PROP_BOOTFS), DATA_TYPE_STRING); if (!error) { error = nvlist_add_uint64(props, zpool_prop_to_name(ZPOOL_PROP_BOOTFS), objnum); } } return (error); } void spa_configfile_set(spa_t *spa, nvlist_t *nvp, boolean_t need_sync) { const char *cachefile; spa_config_dirent_t *dp; if (nvlist_lookup_string(nvp, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE), &cachefile) != 0) return; dp = kmem_alloc(sizeof (spa_config_dirent_t), KM_SLEEP); if (cachefile[0] == '\0') dp->scd_path = spa_strdup(spa_config_path); else if (strcmp(cachefile, "none") == 0) dp->scd_path = NULL; else dp->scd_path = spa_strdup(cachefile); list_insert_head(&spa->spa_config_list, dp); if (need_sync) spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE); } int spa_prop_set(spa_t *spa, nvlist_t *nvp) { int error; nvpair_t *elem = NULL; boolean_t need_sync = B_FALSE; if ((error = spa_prop_validate(spa, nvp)) != 0) return (error); while ((elem = nvlist_next_nvpair(nvp, elem)) != NULL) { zpool_prop_t prop = zpool_name_to_prop(nvpair_name(elem)); if (prop == ZPOOL_PROP_CACHEFILE || prop == ZPOOL_PROP_ALTROOT || prop == ZPOOL_PROP_READONLY) continue; if (prop == ZPOOL_PROP_INVAL && zfs_prop_user(nvpair_name(elem))) { need_sync = B_TRUE; break; } if (prop == ZPOOL_PROP_VERSION || prop == ZPOOL_PROP_INVAL) { uint64_t ver = 0; if (prop == ZPOOL_PROP_VERSION) { VERIFY(nvpair_value_uint64(elem, &ver) == 0); } else { ASSERT(zpool_prop_feature(nvpair_name(elem))); ver = SPA_VERSION_FEATURES; need_sync = B_TRUE; } /* Save time if the version is already set. */ if (ver == spa_version(spa)) continue; /* * In addition to the pool directory object, we might * create the pool properties object, the features for * read object, the features for write object, or the * feature descriptions object. */ error = dsl_sync_task(spa->spa_name, NULL, spa_sync_version, &ver, 6, ZFS_SPACE_CHECK_RESERVED); if (error) return (error); continue; } need_sync = B_TRUE; break; } if (need_sync) { return (dsl_sync_task(spa->spa_name, NULL, spa_sync_props, nvp, 6, ZFS_SPACE_CHECK_RESERVED)); } return (0); } /* * If the bootfs property value is dsobj, clear it. */ void spa_prop_clear_bootfs(spa_t *spa, uint64_t dsobj, dmu_tx_t *tx) { if (spa->spa_bootfs == dsobj && spa->spa_pool_props_object != 0) { VERIFY(zap_remove(spa->spa_meta_objset, spa->spa_pool_props_object, zpool_prop_to_name(ZPOOL_PROP_BOOTFS), tx) == 0); spa->spa_bootfs = 0; } } static int spa_change_guid_check(void *arg, dmu_tx_t *tx) { uint64_t *newguid __maybe_unused = arg; spa_t *spa = dmu_tx_pool(tx)->dp_spa; vdev_t *rvd = spa->spa_root_vdev; uint64_t vdev_state; if (spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT)) { int error = (spa_has_checkpoint(spa)) ? ZFS_ERR_CHECKPOINT_EXISTS : ZFS_ERR_DISCARDING_CHECKPOINT; return (SET_ERROR(error)); } spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); vdev_state = rvd->vdev_state; spa_config_exit(spa, SCL_STATE, FTAG); if (vdev_state != VDEV_STATE_HEALTHY) return (SET_ERROR(ENXIO)); ASSERT3U(spa_guid(spa), !=, *newguid); return (0); } static void spa_change_guid_sync(void *arg, dmu_tx_t *tx) { uint64_t *newguid = arg; spa_t *spa = dmu_tx_pool(tx)->dp_spa; uint64_t oldguid; vdev_t *rvd = spa->spa_root_vdev; oldguid = spa_guid(spa); spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); rvd->vdev_guid = *newguid; rvd->vdev_guid_sum += (*newguid - oldguid); vdev_config_dirty(rvd); spa_config_exit(spa, SCL_STATE, FTAG); spa_history_log_internal(spa, "guid change", tx, "old=%llu new=%llu", (u_longlong_t)oldguid, (u_longlong_t)*newguid); } /* * Change the GUID for the pool. This is done so that we can later * re-import a pool built from a clone of our own vdevs. We will modify * the root vdev's guid, our own pool guid, and then mark all of our * vdevs dirty. Note that we must make sure that all our vdevs are * online when we do this, or else any vdevs that weren't present * would be orphaned from our pool. We are also going to issue a * sysevent to update any watchers. */ int spa_change_guid(spa_t *spa) { int error; uint64_t guid; mutex_enter(&spa->spa_vdev_top_lock); mutex_enter(&spa_namespace_lock); guid = spa_generate_guid(NULL); error = dsl_sync_task(spa->spa_name, spa_change_guid_check, spa_change_guid_sync, &guid, 5, ZFS_SPACE_CHECK_RESERVED); if (error == 0) { /* * Clear the kobj flag from all the vdevs to allow * vdev_cache_process_kobj_evt() to post events to all the * vdevs since GUID is updated. */ vdev_clear_kobj_evt(spa->spa_root_vdev); for (int i = 0; i < spa->spa_l2cache.sav_count; i++) vdev_clear_kobj_evt(spa->spa_l2cache.sav_vdevs[i]); spa_write_cachefile(spa, B_FALSE, B_TRUE, B_TRUE); spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_REGUID); } mutex_exit(&spa_namespace_lock); mutex_exit(&spa->spa_vdev_top_lock); return (error); } /* * ========================================================================== * SPA state manipulation (open/create/destroy/import/export) * ========================================================================== */ static int spa_error_entry_compare(const void *a, const void *b) { const spa_error_entry_t *sa = (const spa_error_entry_t *)a; const spa_error_entry_t *sb = (const spa_error_entry_t *)b; int ret; ret = memcmp(&sa->se_bookmark, &sb->se_bookmark, sizeof (zbookmark_phys_t)); return (TREE_ISIGN(ret)); } /* * Utility function which retrieves copies of the current logs and * re-initializes them in the process. */ void spa_get_errlists(spa_t *spa, avl_tree_t *last, avl_tree_t *scrub) { ASSERT(MUTEX_HELD(&spa->spa_errlist_lock)); memcpy(last, &spa->spa_errlist_last, sizeof (avl_tree_t)); memcpy(scrub, &spa->spa_errlist_scrub, sizeof (avl_tree_t)); avl_create(&spa->spa_errlist_scrub, spa_error_entry_compare, sizeof (spa_error_entry_t), offsetof(spa_error_entry_t, se_avl)); avl_create(&spa->spa_errlist_last, spa_error_entry_compare, sizeof (spa_error_entry_t), offsetof(spa_error_entry_t, se_avl)); } static void spa_taskqs_init(spa_t *spa, zio_type_t t, zio_taskq_type_t q) { const zio_taskq_info_t *ztip = &zio_taskqs[t][q]; enum zti_modes mode = ztip->zti_mode; uint_t value = ztip->zti_value; uint_t count = ztip->zti_count; spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q]; uint_t cpus, flags = TASKQ_DYNAMIC; switch (mode) { case ZTI_MODE_FIXED: ASSERT3U(value, >, 0); break; case ZTI_MODE_SYNC: /* * Create one wr_iss taskq for every 'zio_taskq_write_tpq' CPUs, * not to exceed the number of spa allocators, and align to it. */ cpus = MAX(1, boot_ncpus * zio_taskq_batch_pct / 100); count = MAX(1, cpus / MAX(1, zio_taskq_write_tpq)); count = MAX(count, (zio_taskq_batch_pct + 99) / 100); count = MIN(count, spa->spa_alloc_count); while (spa->spa_alloc_count % count != 0 && spa->spa_alloc_count < count * 2) count--; /* * zio_taskq_batch_pct is unbounded and may exceed 100%, but no * single taskq may have more threads than 100% of online cpus. */ value = (zio_taskq_batch_pct + count / 2) / count; value = MIN(value, 100); flags |= TASKQ_THREADS_CPU_PCT; break; case ZTI_MODE_SCALE: flags |= TASKQ_THREADS_CPU_PCT; /* * We want more taskqs to reduce lock contention, but we want * less for better request ordering and CPU utilization. */ cpus = MAX(1, boot_ncpus * zio_taskq_batch_pct / 100); if (zio_taskq_batch_tpq > 0) { count = MAX(1, (cpus + zio_taskq_batch_tpq / 2) / zio_taskq_batch_tpq); } else { /* * Prefer 6 threads per taskq, but no more taskqs * than threads in them on large systems. For 80%: * * taskq taskq total * cpus taskqs percent threads threads * ------- ------- ------- ------- ------- * 1 1 80% 1 1 * 2 1 80% 1 1 * 4 1 80% 3 3 * 8 2 40% 3 6 * 16 3 27% 4 12 * 32 5 16% 5 25 * 64 7 11% 7 49 * 128 10 8% 10 100 * 256 14 6% 15 210 */ count = 1 + cpus / 6; while (count * count > cpus) count--; } /* Limit each taskq within 100% to not trigger assertion. */ count = MAX(count, (zio_taskq_batch_pct + 99) / 100); value = (zio_taskq_batch_pct + count / 2) / count; break; case ZTI_MODE_NULL: tqs->stqs_count = 0; tqs->stqs_taskq = NULL; return; default: panic("unrecognized mode for %s_%s taskq (%u:%u) in " "spa_taskqs_init()", zio_type_name[t], zio_taskq_types[q], mode, value); break; } ASSERT3U(count, >, 0); tqs->stqs_count = count; tqs->stqs_taskq = kmem_alloc(count * sizeof (taskq_t *), KM_SLEEP); for (uint_t i = 0; i < count; i++) { taskq_t *tq; char name[32]; if (count > 1) (void) snprintf(name, sizeof (name), "%s_%s_%u", zio_type_name[t], zio_taskq_types[q], i); else (void) snprintf(name, sizeof (name), "%s_%s", zio_type_name[t], zio_taskq_types[q]); #ifdef HAVE_SYSDC if (zio_taskq_sysdc && spa->spa_proc != &p0) { (void) zio_taskq_basedc; tq = taskq_create_sysdc(name, value, 50, INT_MAX, spa->spa_proc, zio_taskq_basedc, flags); } else { #endif pri_t pri = maxclsyspri; /* * The write issue taskq can be extremely CPU * intensive. Run it at slightly less important * priority than the other taskqs. * * Under Linux and FreeBSD this means incrementing * the priority value as opposed to platforms like * illumos where it should be decremented. * * On FreeBSD, if priorities divided by four (RQ_PPQ) * are equal then a difference between them is * insignificant. */ if (t == ZIO_TYPE_WRITE && q == ZIO_TASKQ_ISSUE) { #if defined(__linux__) pri++; #elif defined(__FreeBSD__) pri += 4; #else #error "unknown OS" #endif } tq = taskq_create_proc(name, value, pri, 50, INT_MAX, spa->spa_proc, flags); #ifdef HAVE_SYSDC } #endif tqs->stqs_taskq[i] = tq; } } static void spa_taskqs_fini(spa_t *spa, zio_type_t t, zio_taskq_type_t q) { spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q]; if (tqs->stqs_taskq == NULL) { ASSERT3U(tqs->stqs_count, ==, 0); return; } for (uint_t i = 0; i < tqs->stqs_count; i++) { ASSERT3P(tqs->stqs_taskq[i], !=, NULL); taskq_destroy(tqs->stqs_taskq[i]); } kmem_free(tqs->stqs_taskq, tqs->stqs_count * sizeof (taskq_t *)); tqs->stqs_taskq = NULL; } #ifdef _KERNEL /* * The READ and WRITE rows of zio_taskqs are configurable at module load time * by setting zio_taskq_read or zio_taskq_write. * * Example (the defaults for READ and WRITE) * zio_taskq_read='fixed,1,8 null scale null' * zio_taskq_write='sync null scale null' * * Each sets the entire row at a time. * * 'fixed' is parameterised: fixed,Q,T where Q is number of taskqs, T is number * of threads per taskq. * * 'null' can only be set on the high-priority queues (queue selection for * high-priority queues will fall back to the regular queue if the high-pri * is NULL. */ static const char *const modes[ZTI_NMODES] = { "fixed", "scale", "sync", "null" }; /* Parse the incoming config string. Modifies cfg */ static int spa_taskq_param_set(zio_type_t t, char *cfg) { int err = 0; zio_taskq_info_t row[ZIO_TASKQ_TYPES] = {{0}}; char *next = cfg, *tok, *c; /* * Parse out each element from the string and fill `row`. The entire * row has to be set at once, so any errors are flagged by just * breaking out of this loop early. */ uint_t q; for (q = 0; q < ZIO_TASKQ_TYPES; q++) { /* `next` is the start of the config */ if (next == NULL) break; /* Eat up leading space */ while (isspace(*next)) next++; if (*next == '\0') break; /* Mode ends at space or end of string */ tok = next; next = strchr(tok, ' '); if (next != NULL) *next++ = '\0'; /* Parameters start after a comma */ c = strchr(tok, ','); if (c != NULL) *c++ = '\0'; /* Match mode string */ uint_t mode; for (mode = 0; mode < ZTI_NMODES; mode++) if (strcmp(tok, modes[mode]) == 0) break; if (mode == ZTI_NMODES) break; /* Invalid canary */ row[q].zti_mode = ZTI_NMODES; /* Per-mode setup */ switch (mode) { /* * FIXED is parameterised: number of queues, and number of * threads per queue. */ case ZTI_MODE_FIXED: { /* No parameters? */ if (c == NULL || *c == '\0') break; /* Find next parameter */ tok = c; c = strchr(tok, ','); if (c == NULL) break; /* Take digits and convert */ unsigned long long nq; if (!(isdigit(*tok))) break; err = ddi_strtoull(tok, &tok, 10, &nq); /* Must succeed and also end at the next param sep */ if (err != 0 || tok != c) break; /* Move past the comma */ tok++; /* Need another number */ if (!(isdigit(*tok))) break; /* Remember start to make sure we moved */ c = tok; /* Take digits */ unsigned long long ntpq; err = ddi_strtoull(tok, &tok, 10, &ntpq); /* Must succeed, and moved forward */ if (err != 0 || tok == c || *tok != '\0') break; /* * sanity; zero queues/threads make no sense, and * 16K is almost certainly more than anyone will ever * need and avoids silly numbers like UINT32_MAX */ if (nq == 0 || nq >= 16384 || ntpq == 0 || ntpq >= 16384) break; const zio_taskq_info_t zti = ZTI_P(ntpq, nq); row[q] = zti; break; } case ZTI_MODE_SCALE: { const zio_taskq_info_t zti = ZTI_SCALE; row[q] = zti; break; } case ZTI_MODE_SYNC: { const zio_taskq_info_t zti = ZTI_SYNC; row[q] = zti; break; } case ZTI_MODE_NULL: { /* * Can only null the high-priority queues; the general- * purpose ones have to exist. */ if (q != ZIO_TASKQ_ISSUE_HIGH && q != ZIO_TASKQ_INTERRUPT_HIGH) break; const zio_taskq_info_t zti = ZTI_NULL; row[q] = zti; break; } default: break; } /* Ensure we set a mode */ if (row[q].zti_mode == ZTI_NMODES) break; } /* Didn't get a full row, fail */ if (q < ZIO_TASKQ_TYPES) return (SET_ERROR(EINVAL)); /* Eat trailing space */ if (next != NULL) while (isspace(*next)) next++; /* If there's anything left over then fail */ if (next != NULL && *next != '\0') return (SET_ERROR(EINVAL)); /* Success! Copy it into the real config */ for (q = 0; q < ZIO_TASKQ_TYPES; q++) zio_taskqs[t][q] = row[q]; return (0); } static int spa_taskq_param_get(zio_type_t t, char *buf, boolean_t add_newline) { int pos = 0; /* Build paramater string from live config */ const char *sep = ""; for (uint_t q = 0; q < ZIO_TASKQ_TYPES; q++) { const zio_taskq_info_t *zti = &zio_taskqs[t][q]; if (zti->zti_mode == ZTI_MODE_FIXED) pos += sprintf(&buf[pos], "%s%s,%u,%u", sep, modes[zti->zti_mode], zti->zti_count, zti->zti_value); else pos += sprintf(&buf[pos], "%s%s", sep, modes[zti->zti_mode]); sep = " "; } if (add_newline) buf[pos++] = '\n'; buf[pos] = '\0'; return (pos); } #ifdef __linux__ static int spa_taskq_read_param_set(const char *val, zfs_kernel_param_t *kp) { char *cfg = kmem_strdup(val); int err = spa_taskq_param_set(ZIO_TYPE_READ, cfg); kmem_free(cfg, strlen(val)+1); return (-err); } static int spa_taskq_read_param_get(char *buf, zfs_kernel_param_t *kp) { return (spa_taskq_param_get(ZIO_TYPE_READ, buf, TRUE)); } static int spa_taskq_write_param_set(const char *val, zfs_kernel_param_t *kp) { char *cfg = kmem_strdup(val); int err = spa_taskq_param_set(ZIO_TYPE_WRITE, cfg); kmem_free(cfg, strlen(val)+1); return (-err); } static int spa_taskq_write_param_get(char *buf, zfs_kernel_param_t *kp) { return (spa_taskq_param_get(ZIO_TYPE_WRITE, buf, TRUE)); } #else /* * On FreeBSD load-time parameters can be set up before malloc() is available, * so we have to do all the parsing work on the stack. */ #define SPA_TASKQ_PARAM_MAX (128) static int spa_taskq_read_param(ZFS_MODULE_PARAM_ARGS) { char buf[SPA_TASKQ_PARAM_MAX]; int err; (void) spa_taskq_param_get(ZIO_TYPE_READ, buf, FALSE); err = sysctl_handle_string(oidp, buf, sizeof (buf), req); if (err || req->newptr == NULL) return (err); return (spa_taskq_param_set(ZIO_TYPE_READ, buf)); } static int spa_taskq_write_param(ZFS_MODULE_PARAM_ARGS) { char buf[SPA_TASKQ_PARAM_MAX]; int err; (void) spa_taskq_param_get(ZIO_TYPE_WRITE, buf, FALSE); err = sysctl_handle_string(oidp, buf, sizeof (buf), req); if (err || req->newptr == NULL) return (err); return (spa_taskq_param_set(ZIO_TYPE_WRITE, buf)); } #endif #endif /* _KERNEL */ /* * Dispatch a task to the appropriate taskq for the ZFS I/O type and priority. * Note that a type may have multiple discrete taskqs to avoid lock contention * on the taskq itself. */ void spa_taskq_dispatch(spa_t *spa, zio_type_t t, zio_taskq_type_t q, task_func_t *func, zio_t *zio, boolean_t cutinline) { spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q]; taskq_t *tq; ASSERT3P(tqs->stqs_taskq, !=, NULL); ASSERT3U(tqs->stqs_count, !=, 0); /* * NB: We are assuming that the zio can only be dispatched * to a single taskq at a time. It would be a grievous error * to dispatch the zio to another taskq at the same time. */ ASSERT(zio); ASSERT(taskq_empty_ent(&zio->io_tqent)); if (tqs->stqs_count == 1) { tq = tqs->stqs_taskq[0]; } else if ((t == ZIO_TYPE_WRITE) && (q == ZIO_TASKQ_ISSUE) && ZIO_HAS_ALLOCATOR(zio)) { tq = tqs->stqs_taskq[zio->io_allocator % tqs->stqs_count]; } else { tq = tqs->stqs_taskq[((uint64_t)gethrtime()) % tqs->stqs_count]; } taskq_dispatch_ent(tq, func, zio, cutinline ? TQ_FRONT : 0, &zio->io_tqent); } static void spa_create_zio_taskqs(spa_t *spa) { for (int t = 0; t < ZIO_TYPES; t++) { for (int q = 0; q < ZIO_TASKQ_TYPES; q++) { spa_taskqs_init(spa, t, q); } } } #if defined(_KERNEL) && defined(HAVE_SPA_THREAD) static void spa_thread(void *arg) { psetid_t zio_taskq_psrset_bind = PS_NONE; callb_cpr_t cprinfo; spa_t *spa = arg; user_t *pu = PTOU(curproc); CALLB_CPR_INIT(&cprinfo, &spa->spa_proc_lock, callb_generic_cpr, spa->spa_name); ASSERT(curproc != &p0); (void) snprintf(pu->u_psargs, sizeof (pu->u_psargs), "zpool-%s", spa->spa_name); (void) strlcpy(pu->u_comm, pu->u_psargs, sizeof (pu->u_comm)); /* bind this thread to the requested psrset */ if (zio_taskq_psrset_bind != PS_NONE) { pool_lock(); mutex_enter(&cpu_lock); mutex_enter(&pidlock); mutex_enter(&curproc->p_lock); if (cpupart_bind_thread(curthread, zio_taskq_psrset_bind, 0, NULL, NULL) == 0) { curthread->t_bind_pset = zio_taskq_psrset_bind; } else { cmn_err(CE_WARN, "Couldn't bind process for zfs pool \"%s\" to " "pset %d\n", spa->spa_name, zio_taskq_psrset_bind); } mutex_exit(&curproc->p_lock); mutex_exit(&pidlock); mutex_exit(&cpu_lock); pool_unlock(); } #ifdef HAVE_SYSDC if (zio_taskq_sysdc) { sysdc_thread_enter(curthread, 100, 0); } #endif spa->spa_proc = curproc; spa->spa_did = curthread->t_did; spa_create_zio_taskqs(spa); mutex_enter(&spa->spa_proc_lock); ASSERT(spa->spa_proc_state == SPA_PROC_CREATED); spa->spa_proc_state = SPA_PROC_ACTIVE; cv_broadcast(&spa->spa_proc_cv); CALLB_CPR_SAFE_BEGIN(&cprinfo); while (spa->spa_proc_state == SPA_PROC_ACTIVE) cv_wait(&spa->spa_proc_cv, &spa->spa_proc_lock); CALLB_CPR_SAFE_END(&cprinfo, &spa->spa_proc_lock); ASSERT(spa->spa_proc_state == SPA_PROC_DEACTIVATE); spa->spa_proc_state = SPA_PROC_GONE; spa->spa_proc = &p0; cv_broadcast(&spa->spa_proc_cv); CALLB_CPR_EXIT(&cprinfo); /* drops spa_proc_lock */ mutex_enter(&curproc->p_lock); lwp_exit(); } #endif extern metaslab_ops_t *metaslab_allocator(spa_t *spa); /* * Activate an uninitialized pool. */ static void spa_activate(spa_t *spa, spa_mode_t mode) { metaslab_ops_t *msp = metaslab_allocator(spa); ASSERT(spa->spa_state == POOL_STATE_UNINITIALIZED); spa->spa_state = POOL_STATE_ACTIVE; spa->spa_mode = mode; spa->spa_read_spacemaps = spa_mode_readable_spacemaps; spa->spa_normal_class = metaslab_class_create(spa, msp); spa->spa_log_class = metaslab_class_create(spa, msp); spa->spa_embedded_log_class = metaslab_class_create(spa, msp); spa->spa_special_class = metaslab_class_create(spa, msp); spa->spa_dedup_class = metaslab_class_create(spa, msp); /* Try to create a covering process */ mutex_enter(&spa->spa_proc_lock); ASSERT(spa->spa_proc_state == SPA_PROC_NONE); ASSERT(spa->spa_proc == &p0); spa->spa_did = 0; #ifdef HAVE_SPA_THREAD /* Only create a process if we're going to be around a while. */ if (spa_create_process && strcmp(spa->spa_name, TRYIMPORT_NAME) != 0) { if (newproc(spa_thread, (caddr_t)spa, syscid, maxclsyspri, NULL, 0) == 0) { spa->spa_proc_state = SPA_PROC_CREATED; while (spa->spa_proc_state == SPA_PROC_CREATED) { cv_wait(&spa->spa_proc_cv, &spa->spa_proc_lock); } ASSERT(spa->spa_proc_state == SPA_PROC_ACTIVE); ASSERT(spa->spa_proc != &p0); ASSERT(spa->spa_did != 0); } else { #ifdef _KERNEL cmn_err(CE_WARN, "Couldn't create process for zfs pool \"%s\"\n", spa->spa_name); #endif } } #endif /* HAVE_SPA_THREAD */ mutex_exit(&spa->spa_proc_lock); /* If we didn't create a process, we need to create our taskqs. */ if (spa->spa_proc == &p0) { spa_create_zio_taskqs(spa); } for (size_t i = 0; i < TXG_SIZE; i++) { spa->spa_txg_zio[i] = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); } list_create(&spa->spa_config_dirty_list, sizeof (vdev_t), offsetof(vdev_t, vdev_config_dirty_node)); list_create(&spa->spa_evicting_os_list, sizeof (objset_t), offsetof(objset_t, os_evicting_node)); list_create(&spa->spa_state_dirty_list, sizeof (vdev_t), offsetof(vdev_t, vdev_state_dirty_node)); txg_list_create(&spa->spa_vdev_txg_list, spa, offsetof(struct vdev, vdev_txg_node)); avl_create(&spa->spa_errlist_scrub, spa_error_entry_compare, sizeof (spa_error_entry_t), offsetof(spa_error_entry_t, se_avl)); avl_create(&spa->spa_errlist_last, spa_error_entry_compare, sizeof (spa_error_entry_t), offsetof(spa_error_entry_t, se_avl)); avl_create(&spa->spa_errlist_healed, spa_error_entry_compare, sizeof (spa_error_entry_t), offsetof(spa_error_entry_t, se_avl)); spa_activate_os(spa); spa_keystore_init(&spa->spa_keystore); /* * This taskq is used to perform zvol-minor-related tasks * asynchronously. This has several advantages, including easy * resolution of various deadlocks. * * The taskq must be single threaded to ensure tasks are always * processed in the order in which they were dispatched. * * A taskq per pool allows one to keep the pools independent. * This way if one pool is suspended, it will not impact another. * * The preferred location to dispatch a zvol minor task is a sync * task. In this context, there is easy access to the spa_t and minimal * error handling is required because the sync task must succeed. */ spa->spa_zvol_taskq = taskq_create("z_zvol", 1, defclsyspri, 1, INT_MAX, 0); /* * The taskq to preload metaslabs. */ spa->spa_metaslab_taskq = taskq_create("z_metaslab", metaslab_preload_pct, maxclsyspri, 1, INT_MAX, TASKQ_DYNAMIC | TASKQ_THREADS_CPU_PCT); /* * Taskq dedicated to prefetcher threads: this is used to prevent the * pool traverse code from monopolizing the global (and limited) * system_taskq by inappropriately scheduling long running tasks on it. */ spa->spa_prefetch_taskq = taskq_create("z_prefetch", 100, defclsyspri, 1, INT_MAX, TASKQ_DYNAMIC | TASKQ_THREADS_CPU_PCT); /* * The taskq to upgrade datasets in this pool. Currently used by * feature SPA_FEATURE_USEROBJ_ACCOUNTING/SPA_FEATURE_PROJECT_QUOTA. */ spa->spa_upgrade_taskq = taskq_create("z_upgrade", 100, defclsyspri, 1, INT_MAX, TASKQ_DYNAMIC | TASKQ_THREADS_CPU_PCT); } /* * Opposite of spa_activate(). */ static void spa_deactivate(spa_t *spa) { ASSERT(spa->spa_sync_on == B_FALSE); ASSERT(spa->spa_dsl_pool == NULL); ASSERT(spa->spa_root_vdev == NULL); ASSERT(spa->spa_async_zio_root == NULL); ASSERT(spa->spa_state != POOL_STATE_UNINITIALIZED); spa_evicting_os_wait(spa); if (spa->spa_zvol_taskq) { taskq_destroy(spa->spa_zvol_taskq); spa->spa_zvol_taskq = NULL; } if (spa->spa_metaslab_taskq) { taskq_destroy(spa->spa_metaslab_taskq); spa->spa_metaslab_taskq = NULL; } if (spa->spa_prefetch_taskq) { taskq_destroy(spa->spa_prefetch_taskq); spa->spa_prefetch_taskq = NULL; } if (spa->spa_upgrade_taskq) { taskq_destroy(spa->spa_upgrade_taskq); spa->spa_upgrade_taskq = NULL; } txg_list_destroy(&spa->spa_vdev_txg_list); list_destroy(&spa->spa_config_dirty_list); list_destroy(&spa->spa_evicting_os_list); list_destroy(&spa->spa_state_dirty_list); taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid); for (int t = 0; t < ZIO_TYPES; t++) { for (int q = 0; q < ZIO_TASKQ_TYPES; q++) { spa_taskqs_fini(spa, t, q); } } for (size_t i = 0; i < TXG_SIZE; i++) { ASSERT3P(spa->spa_txg_zio[i], !=, NULL); VERIFY0(zio_wait(spa->spa_txg_zio[i])); spa->spa_txg_zio[i] = NULL; } metaslab_class_destroy(spa->spa_normal_class); spa->spa_normal_class = NULL; metaslab_class_destroy(spa->spa_log_class); spa->spa_log_class = NULL; metaslab_class_destroy(spa->spa_embedded_log_class); spa->spa_embedded_log_class = NULL; metaslab_class_destroy(spa->spa_special_class); spa->spa_special_class = NULL; metaslab_class_destroy(spa->spa_dedup_class); spa->spa_dedup_class = NULL; /* * If this was part of an import or the open otherwise failed, we may * still have errors left in the queues. Empty them just in case. */ spa_errlog_drain(spa); avl_destroy(&spa->spa_errlist_scrub); avl_destroy(&spa->spa_errlist_last); avl_destroy(&spa->spa_errlist_healed); spa_keystore_fini(&spa->spa_keystore); spa->spa_state = POOL_STATE_UNINITIALIZED; mutex_enter(&spa->spa_proc_lock); if (spa->spa_proc_state != SPA_PROC_NONE) { ASSERT(spa->spa_proc_state == SPA_PROC_ACTIVE); spa->spa_proc_state = SPA_PROC_DEACTIVATE; cv_broadcast(&spa->spa_proc_cv); while (spa->spa_proc_state == SPA_PROC_DEACTIVATE) { ASSERT(spa->spa_proc != &p0); cv_wait(&spa->spa_proc_cv, &spa->spa_proc_lock); } ASSERT(spa->spa_proc_state == SPA_PROC_GONE); spa->spa_proc_state = SPA_PROC_NONE; } ASSERT(spa->spa_proc == &p0); mutex_exit(&spa->spa_proc_lock); /* * We want to make sure spa_thread() has actually exited the ZFS * module, so that the module can't be unloaded out from underneath * it. */ if (spa->spa_did != 0) { thread_join(spa->spa_did); spa->spa_did = 0; } spa_deactivate_os(spa); } /* * Verify a pool configuration, and construct the vdev tree appropriately. This * will create all the necessary vdevs in the appropriate layout, with each vdev * in the CLOSED state. This will prep the pool before open/creation/import. * All vdev validation is done by the vdev_alloc() routine. */ int spa_config_parse(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id, int atype) { nvlist_t **child; uint_t children; int error; if ((error = vdev_alloc(spa, vdp, nv, parent, id, atype)) != 0) return (error); if ((*vdp)->vdev_ops->vdev_op_leaf) return (0); error = nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children); if (error == ENOENT) return (0); if (error) { vdev_free(*vdp); *vdp = NULL; return (SET_ERROR(EINVAL)); } for (int c = 0; c < children; c++) { vdev_t *vd; if ((error = spa_config_parse(spa, &vd, child[c], *vdp, c, atype)) != 0) { vdev_free(*vdp); *vdp = NULL; return (error); } } ASSERT(*vdp != NULL); return (0); } static boolean_t spa_should_flush_logs_on_unload(spa_t *spa) { if (!spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP)) return (B_FALSE); if (!spa_writeable(spa)) return (B_FALSE); if (!spa->spa_sync_on) return (B_FALSE); if (spa_state(spa) != POOL_STATE_EXPORTED) return (B_FALSE); if (zfs_keep_log_spacemaps_at_export) return (B_FALSE); return (B_TRUE); } /* * Opens a transaction that will set the flag that will instruct * spa_sync to attempt to flush all the metaslabs for that txg. */ static void spa_unload_log_sm_flush_all(spa_t *spa) { dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); VERIFY0(dmu_tx_assign(tx, TXG_WAIT)); ASSERT3U(spa->spa_log_flushall_txg, ==, 0); spa->spa_log_flushall_txg = dmu_tx_get_txg(tx); dmu_tx_commit(tx); txg_wait_synced(spa_get_dsl(spa), spa->spa_log_flushall_txg); } static void spa_unload_log_sm_metadata(spa_t *spa) { void *cookie = NULL; spa_log_sm_t *sls; log_summary_entry_t *e; while ((sls = avl_destroy_nodes(&spa->spa_sm_logs_by_txg, &cookie)) != NULL) { VERIFY0(sls->sls_mscount); kmem_free(sls, sizeof (spa_log_sm_t)); } while ((e = list_remove_head(&spa->spa_log_summary)) != NULL) { VERIFY0(e->lse_mscount); kmem_free(e, sizeof (log_summary_entry_t)); } spa->spa_unflushed_stats.sus_nblocks = 0; spa->spa_unflushed_stats.sus_memused = 0; spa->spa_unflushed_stats.sus_blocklimit = 0; } static void spa_destroy_aux_threads(spa_t *spa) { if (spa->spa_condense_zthr != NULL) { zthr_destroy(spa->spa_condense_zthr); spa->spa_condense_zthr = NULL; } if (spa->spa_checkpoint_discard_zthr != NULL) { zthr_destroy(spa->spa_checkpoint_discard_zthr); spa->spa_checkpoint_discard_zthr = NULL; } if (spa->spa_livelist_delete_zthr != NULL) { zthr_destroy(spa->spa_livelist_delete_zthr); spa->spa_livelist_delete_zthr = NULL; } if (spa->spa_livelist_condense_zthr != NULL) { zthr_destroy(spa->spa_livelist_condense_zthr); spa->spa_livelist_condense_zthr = NULL; } if (spa->spa_raidz_expand_zthr != NULL) { zthr_destroy(spa->spa_raidz_expand_zthr); spa->spa_raidz_expand_zthr = NULL; } } /* * Opposite of spa_load(). */ static void spa_unload(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock) || spa->spa_export_thread == curthread); ASSERT(spa_state(spa) != POOL_STATE_UNINITIALIZED); spa_import_progress_remove(spa_guid(spa)); spa_load_note(spa, "UNLOADING"); spa_wake_waiters(spa); /* * If we have set the spa_final_txg, we have already performed the * tasks below in spa_export_common(). We should not redo it here since * we delay the final TXGs beyond what spa_final_txg is set at. */ if (spa->spa_final_txg == UINT64_MAX) { /* * If the log space map feature is enabled and the pool is * getting exported (but not destroyed), we want to spend some * time flushing as many metaslabs as we can in an attempt to * destroy log space maps and save import time. */ if (spa_should_flush_logs_on_unload(spa)) spa_unload_log_sm_flush_all(spa); /* * Stop async tasks. */ spa_async_suspend(spa); if (spa->spa_root_vdev) { vdev_t *root_vdev = spa->spa_root_vdev; vdev_initialize_stop_all(root_vdev, VDEV_INITIALIZE_ACTIVE); vdev_trim_stop_all(root_vdev, VDEV_TRIM_ACTIVE); vdev_autotrim_stop_all(spa); vdev_rebuild_stop_all(spa); } } /* * Stop syncing. */ if (spa->spa_sync_on) { txg_sync_stop(spa->spa_dsl_pool); spa->spa_sync_on = B_FALSE; } /* * This ensures that there is no async metaslab prefetching * while we attempt to unload the spa. */ taskq_wait(spa->spa_metaslab_taskq); if (spa->spa_mmp.mmp_thread) mmp_thread_stop(spa); /* * Wait for any outstanding async I/O to complete. */ if (spa->spa_async_zio_root != NULL) { for (int i = 0; i < max_ncpus; i++) (void) zio_wait(spa->spa_async_zio_root[i]); kmem_free(spa->spa_async_zio_root, max_ncpus * sizeof (void *)); spa->spa_async_zio_root = NULL; } if (spa->spa_vdev_removal != NULL) { spa_vdev_removal_destroy(spa->spa_vdev_removal); spa->spa_vdev_removal = NULL; } spa_destroy_aux_threads(spa); spa_condense_fini(spa); bpobj_close(&spa->spa_deferred_bpobj); spa_config_enter(spa, SCL_ALL, spa, RW_WRITER); /* * Close all vdevs. */ if (spa->spa_root_vdev) vdev_free(spa->spa_root_vdev); ASSERT(spa->spa_root_vdev == NULL); /* * Close the dsl pool. */ if (spa->spa_dsl_pool) { dsl_pool_close(spa->spa_dsl_pool); spa->spa_dsl_pool = NULL; spa->spa_meta_objset = NULL; } ddt_unload(spa); brt_unload(spa); spa_unload_log_sm_metadata(spa); /* * Drop and purge level 2 cache */ spa_l2cache_drop(spa); if (spa->spa_spares.sav_vdevs) { for (int i = 0; i < spa->spa_spares.sav_count; i++) vdev_free(spa->spa_spares.sav_vdevs[i]); kmem_free(spa->spa_spares.sav_vdevs, spa->spa_spares.sav_count * sizeof (void *)); spa->spa_spares.sav_vdevs = NULL; } if (spa->spa_spares.sav_config) { nvlist_free(spa->spa_spares.sav_config); spa->spa_spares.sav_config = NULL; } spa->spa_spares.sav_count = 0; if (spa->spa_l2cache.sav_vdevs) { for (int i = 0; i < spa->spa_l2cache.sav_count; i++) { vdev_clear_stats(spa->spa_l2cache.sav_vdevs[i]); vdev_free(spa->spa_l2cache.sav_vdevs[i]); } kmem_free(spa->spa_l2cache.sav_vdevs, spa->spa_l2cache.sav_count * sizeof (void *)); spa->spa_l2cache.sav_vdevs = NULL; } if (spa->spa_l2cache.sav_config) { nvlist_free(spa->spa_l2cache.sav_config); spa->spa_l2cache.sav_config = NULL; } spa->spa_l2cache.sav_count = 0; spa->spa_async_suspended = 0; spa->spa_indirect_vdevs_loaded = B_FALSE; if (spa->spa_comment != NULL) { spa_strfree(spa->spa_comment); spa->spa_comment = NULL; } if (spa->spa_compatibility != NULL) { spa_strfree(spa->spa_compatibility); spa->spa_compatibility = NULL; } spa->spa_raidz_expand = NULL; spa_config_exit(spa, SCL_ALL, spa); } /* * Load (or re-load) the current list of vdevs describing the active spares for * this pool. When this is called, we have some form of basic information in * 'spa_spares.sav_config'. We parse this into vdevs, try to open them, and * then re-generate a more complete list including status information. */ void spa_load_spares(spa_t *spa) { nvlist_t **spares; uint_t nspares; int i; vdev_t *vd, *tvd; #ifndef _KERNEL /* * zdb opens both the current state of the pool and the * checkpointed state (if present), with a different spa_t. * * As spare vdevs are shared among open pools, we skip loading * them when we load the checkpointed state of the pool. */ if (!spa_writeable(spa)) return; #endif ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); /* * First, close and free any existing spare vdevs. */ if (spa->spa_spares.sav_vdevs) { for (i = 0; i < spa->spa_spares.sav_count; i++) { vd = spa->spa_spares.sav_vdevs[i]; /* Undo the call to spa_activate() below */ if ((tvd = spa_lookup_by_guid(spa, vd->vdev_guid, B_FALSE)) != NULL && tvd->vdev_isspare) spa_spare_remove(tvd); vdev_close(vd); vdev_free(vd); } kmem_free(spa->spa_spares.sav_vdevs, spa->spa_spares.sav_count * sizeof (void *)); } if (spa->spa_spares.sav_config == NULL) nspares = 0; else VERIFY0(nvlist_lookup_nvlist_array(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES, &spares, &nspares)); spa->spa_spares.sav_count = (int)nspares; spa->spa_spares.sav_vdevs = NULL; if (nspares == 0) return; /* * Construct the array of vdevs, opening them to get status in the * process. For each spare, there is potentially two different vdev_t * structures associated with it: one in the list of spares (used only * for basic validation purposes) and one in the active vdev * configuration (if it's spared in). During this phase we open and * validate each vdev on the spare list. If the vdev also exists in the * active configuration, then we also mark this vdev as an active spare. */ spa->spa_spares.sav_vdevs = kmem_zalloc(nspares * sizeof (void *), KM_SLEEP); for (i = 0; i < spa->spa_spares.sav_count; i++) { VERIFY(spa_config_parse(spa, &vd, spares[i], NULL, 0, VDEV_ALLOC_SPARE) == 0); ASSERT(vd != NULL); spa->spa_spares.sav_vdevs[i] = vd; if ((tvd = spa_lookup_by_guid(spa, vd->vdev_guid, B_FALSE)) != NULL) { if (!tvd->vdev_isspare) spa_spare_add(tvd); /* * We only mark the spare active if we were successfully * able to load the vdev. Otherwise, importing a pool * with a bad active spare would result in strange * behavior, because multiple pool would think the spare * is actively in use. * * There is a vulnerability here to an equally bizarre * circumstance, where a dead active spare is later * brought back to life (onlined or otherwise). Given * the rarity of this scenario, and the extra complexity * it adds, we ignore the possibility. */ if (!vdev_is_dead(tvd)) spa_spare_activate(tvd); } vd->vdev_top = vd; vd->vdev_aux = &spa->spa_spares; if (vdev_open(vd) != 0) continue; if (vdev_validate_aux(vd) == 0) spa_spare_add(vd); } /* * Recompute the stashed list of spares, with status information * this time. */ fnvlist_remove(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES); spares = kmem_alloc(spa->spa_spares.sav_count * sizeof (void *), KM_SLEEP); for (i = 0; i < spa->spa_spares.sav_count; i++) spares[i] = vdev_config_generate(spa, spa->spa_spares.sav_vdevs[i], B_TRUE, VDEV_CONFIG_SPARE); fnvlist_add_nvlist_array(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES, (const nvlist_t * const *)spares, spa->spa_spares.sav_count); for (i = 0; i < spa->spa_spares.sav_count; i++) nvlist_free(spares[i]); kmem_free(spares, spa->spa_spares.sav_count * sizeof (void *)); } /* * Load (or re-load) the current list of vdevs describing the active l2cache for * this pool. When this is called, we have some form of basic information in * 'spa_l2cache.sav_config'. We parse this into vdevs, try to open them, and * then re-generate a more complete list including status information. * Devices which are already active have their details maintained, and are * not re-opened. */ void spa_load_l2cache(spa_t *spa) { nvlist_t **l2cache = NULL; uint_t nl2cache; int i, j, oldnvdevs; uint64_t guid; vdev_t *vd, **oldvdevs, **newvdevs; spa_aux_vdev_t *sav = &spa->spa_l2cache; #ifndef _KERNEL /* * zdb opens both the current state of the pool and the * checkpointed state (if present), with a different spa_t. * * As L2 caches are part of the ARC which is shared among open * pools, we skip loading them when we load the checkpointed * state of the pool. */ if (!spa_writeable(spa)) return; #endif ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); oldvdevs = sav->sav_vdevs; oldnvdevs = sav->sav_count; sav->sav_vdevs = NULL; sav->sav_count = 0; if (sav->sav_config == NULL) { nl2cache = 0; newvdevs = NULL; goto out; } VERIFY0(nvlist_lookup_nvlist_array(sav->sav_config, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache)); newvdevs = kmem_alloc(nl2cache * sizeof (void *), KM_SLEEP); /* * Process new nvlist of vdevs. */ for (i = 0; i < nl2cache; i++) { guid = fnvlist_lookup_uint64(l2cache[i], ZPOOL_CONFIG_GUID); newvdevs[i] = NULL; for (j = 0; j < oldnvdevs; j++) { vd = oldvdevs[j]; if (vd != NULL && guid == vd->vdev_guid) { /* * Retain previous vdev for add/remove ops. */ newvdevs[i] = vd; oldvdevs[j] = NULL; break; } } if (newvdevs[i] == NULL) { /* * Create new vdev */ VERIFY(spa_config_parse(spa, &vd, l2cache[i], NULL, 0, VDEV_ALLOC_L2CACHE) == 0); ASSERT(vd != NULL); newvdevs[i] = vd; /* * Commit this vdev as an l2cache device, * even if it fails to open. */ spa_l2cache_add(vd); vd->vdev_top = vd; vd->vdev_aux = sav; spa_l2cache_activate(vd); if (vdev_open(vd) != 0) continue; (void) vdev_validate_aux(vd); if (!vdev_is_dead(vd)) l2arc_add_vdev(spa, vd); /* * Upon cache device addition to a pool or pool * creation with a cache device or if the header * of the device is invalid we issue an async * TRIM command for the whole device which will * execute if l2arc_trim_ahead > 0. */ spa_async_request(spa, SPA_ASYNC_L2CACHE_TRIM); } } sav->sav_vdevs = newvdevs; sav->sav_count = (int)nl2cache; /* * Recompute the stashed list of l2cache devices, with status * information this time. */ fnvlist_remove(sav->sav_config, ZPOOL_CONFIG_L2CACHE); if (sav->sav_count > 0) l2cache = kmem_alloc(sav->sav_count * sizeof (void *), KM_SLEEP); for (i = 0; i < sav->sav_count; i++) l2cache[i] = vdev_config_generate(spa, sav->sav_vdevs[i], B_TRUE, VDEV_CONFIG_L2CACHE); fnvlist_add_nvlist_array(sav->sav_config, ZPOOL_CONFIG_L2CACHE, (const nvlist_t * const *)l2cache, sav->sav_count); out: /* * Purge vdevs that were dropped */ if (oldvdevs) { for (i = 0; i < oldnvdevs; i++) { uint64_t pool; vd = oldvdevs[i]; if (vd != NULL) { ASSERT(vd->vdev_isl2cache); if (spa_l2cache_exists(vd->vdev_guid, &pool) && pool != 0ULL && l2arc_vdev_present(vd)) l2arc_remove_vdev(vd); vdev_clear_stats(vd); vdev_free(vd); } } kmem_free(oldvdevs, oldnvdevs * sizeof (void *)); } for (i = 0; i < sav->sav_count; i++) nvlist_free(l2cache[i]); if (sav->sav_count) kmem_free(l2cache, sav->sav_count * sizeof (void *)); } static int load_nvlist(spa_t *spa, uint64_t obj, nvlist_t **value) { dmu_buf_t *db; char *packed = NULL; size_t nvsize = 0; int error; *value = NULL; error = dmu_bonus_hold(spa->spa_meta_objset, obj, FTAG, &db); if (error) return (error); nvsize = *(uint64_t *)db->db_data; dmu_buf_rele(db, FTAG); packed = vmem_alloc(nvsize, KM_SLEEP); error = dmu_read(spa->spa_meta_objset, obj, 0, nvsize, packed, DMU_READ_PREFETCH); if (error == 0) error = nvlist_unpack(packed, nvsize, value, 0); vmem_free(packed, nvsize); return (error); } /* * Concrete top-level vdevs that are not missing and are not logs. At every * spa_sync we write new uberblocks to at least SPA_SYNC_MIN_VDEVS core tvds. */ static uint64_t spa_healthy_core_tvds(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; uint64_t tvds = 0; for (uint64_t i = 0; i < rvd->vdev_children; i++) { vdev_t *vd = rvd->vdev_child[i]; if (vd->vdev_islog) continue; if (vdev_is_concrete(vd) && !vdev_is_dead(vd)) tvds++; } return (tvds); } /* * Checks to see if the given vdev could not be opened, in which case we post a * sysevent to notify the autoreplace code that the device has been removed. */ static void spa_check_removed(vdev_t *vd) { for (uint64_t c = 0; c < vd->vdev_children; c++) spa_check_removed(vd->vdev_child[c]); if (vd->vdev_ops->vdev_op_leaf && vdev_is_dead(vd) && vdev_is_concrete(vd)) { zfs_post_autoreplace(vd->vdev_spa, vd); spa_event_notify(vd->vdev_spa, vd, NULL, ESC_ZFS_VDEV_CHECK); } } static int spa_check_for_missing_logs(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; /* * If we're doing a normal import, then build up any additional * diagnostic information about missing log devices. * We'll pass this up to the user for further processing. */ if (!(spa->spa_import_flags & ZFS_IMPORT_MISSING_LOG)) { nvlist_t **child, *nv; uint64_t idx = 0; child = kmem_alloc(rvd->vdev_children * sizeof (nvlist_t *), KM_SLEEP); nv = fnvlist_alloc(); for (uint64_t c = 0; c < rvd->vdev_children; c++) { vdev_t *tvd = rvd->vdev_child[c]; /* * We consider a device as missing only if it failed * to open (i.e. offline or faulted is not considered * as missing). */ if (tvd->vdev_islog && tvd->vdev_state == VDEV_STATE_CANT_OPEN) { child[idx++] = vdev_config_generate(spa, tvd, B_FALSE, VDEV_CONFIG_MISSING); } } if (idx > 0) { fnvlist_add_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, (const nvlist_t * const *)child, idx); fnvlist_add_nvlist(spa->spa_load_info, ZPOOL_CONFIG_MISSING_DEVICES, nv); for (uint64_t i = 0; i < idx; i++) nvlist_free(child[i]); } nvlist_free(nv); kmem_free(child, rvd->vdev_children * sizeof (char **)); if (idx > 0) { spa_load_failed(spa, "some log devices are missing"); vdev_dbgmsg_print_tree(rvd, 2); return (SET_ERROR(ENXIO)); } } else { for (uint64_t c = 0; c < rvd->vdev_children; c++) { vdev_t *tvd = rvd->vdev_child[c]; if (tvd->vdev_islog && tvd->vdev_state == VDEV_STATE_CANT_OPEN) { spa_set_log_state(spa, SPA_LOG_CLEAR); spa_load_note(spa, "some log devices are " "missing, ZIL is dropped."); vdev_dbgmsg_print_tree(rvd, 2); break; } } } return (0); } /* * Check for missing log devices */ static boolean_t spa_check_logs(spa_t *spa) { boolean_t rv = B_FALSE; dsl_pool_t *dp = spa_get_dsl(spa); switch (spa->spa_log_state) { default: break; case SPA_LOG_MISSING: /* need to recheck in case slog has been restored */ case SPA_LOG_UNKNOWN: rv = (dmu_objset_find_dp(dp, dp->dp_root_dir_obj, zil_check_log_chain, NULL, DS_FIND_CHILDREN) != 0); if (rv) spa_set_log_state(spa, SPA_LOG_MISSING); break; } return (rv); } /* * Passivate any log vdevs (note, does not apply to embedded log metaslabs). */ static boolean_t spa_passivate_log(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; boolean_t slog_found = B_FALSE; ASSERT(spa_config_held(spa, SCL_ALLOC, RW_WRITER)); for (int c = 0; c < rvd->vdev_children; c++) { vdev_t *tvd = rvd->vdev_child[c]; if (tvd->vdev_islog) { ASSERT3P(tvd->vdev_log_mg, ==, NULL); metaslab_group_passivate(tvd->vdev_mg); slog_found = B_TRUE; } } return (slog_found); } /* * Activate any log vdevs (note, does not apply to embedded log metaslabs). */ static void spa_activate_log(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; ASSERT(spa_config_held(spa, SCL_ALLOC, RW_WRITER)); for (int c = 0; c < rvd->vdev_children; c++) { vdev_t *tvd = rvd->vdev_child[c]; if (tvd->vdev_islog) { ASSERT3P(tvd->vdev_log_mg, ==, NULL); metaslab_group_activate(tvd->vdev_mg); } } } int spa_reset_logs(spa_t *spa) { int error; error = dmu_objset_find(spa_name(spa), zil_reset, NULL, DS_FIND_CHILDREN); if (error == 0) { /* * We successfully offlined the log device, sync out the * current txg so that the "stubby" block can be removed * by zil_sync(). */ txg_wait_synced(spa->spa_dsl_pool, 0); } return (error); } static void spa_aux_check_removed(spa_aux_vdev_t *sav) { for (int i = 0; i < sav->sav_count; i++) spa_check_removed(sav->sav_vdevs[i]); } void spa_claim_notify(zio_t *zio) { spa_t *spa = zio->io_spa; if (zio->io_error) return; mutex_enter(&spa->spa_props_lock); /* any mutex will do */ if (spa->spa_claim_max_txg < BP_GET_LOGICAL_BIRTH(zio->io_bp)) spa->spa_claim_max_txg = BP_GET_LOGICAL_BIRTH(zio->io_bp); mutex_exit(&spa->spa_props_lock); } typedef struct spa_load_error { boolean_t sle_verify_data; uint64_t sle_meta_count; uint64_t sle_data_count; } spa_load_error_t; static void spa_load_verify_done(zio_t *zio) { blkptr_t *bp = zio->io_bp; spa_load_error_t *sle = zio->io_private; dmu_object_type_t type = BP_GET_TYPE(bp); int error = zio->io_error; spa_t *spa = zio->io_spa; abd_free(zio->io_abd); if (error) { if ((BP_GET_LEVEL(bp) != 0 || DMU_OT_IS_METADATA(type)) && type != DMU_OT_INTENT_LOG) atomic_inc_64(&sle->sle_meta_count); else atomic_inc_64(&sle->sle_data_count); } mutex_enter(&spa->spa_scrub_lock); spa->spa_load_verify_bytes -= BP_GET_PSIZE(bp); cv_broadcast(&spa->spa_scrub_io_cv); mutex_exit(&spa->spa_scrub_lock); } /* * Maximum number of inflight bytes is the log2 fraction of the arc size. * By default, we set it to 1/16th of the arc. */ static uint_t spa_load_verify_shift = 4; static int spa_load_verify_metadata = B_TRUE; static int spa_load_verify_data = B_TRUE; static int spa_load_verify_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp, const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg) { zio_t *rio = arg; spa_load_error_t *sle = rio->io_private; (void) zilog, (void) dnp; /* * Note: normally this routine will not be called if * spa_load_verify_metadata is not set. However, it may be useful * to manually set the flag after the traversal has begun. */ if (!spa_load_verify_metadata) return (0); /* * Sanity check the block pointer in order to detect obvious damage * before using the contents in subsequent checks or in zio_read(). * When damaged consider it to be a metadata error since we cannot * trust the BP_GET_TYPE and BP_GET_LEVEL values. */ if (!zfs_blkptr_verify(spa, bp, BLK_CONFIG_NEEDED, BLK_VERIFY_LOG)) { atomic_inc_64(&sle->sle_meta_count); return (0); } if (zb->zb_level == ZB_DNODE_LEVEL || BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp) || BP_IS_REDACTED(bp)) return (0); if (!BP_IS_METADATA(bp) && (!spa_load_verify_data || !sle->sle_verify_data)) return (0); uint64_t maxinflight_bytes = arc_target_bytes() >> spa_load_verify_shift; size_t size = BP_GET_PSIZE(bp); mutex_enter(&spa->spa_scrub_lock); while (spa->spa_load_verify_bytes >= maxinflight_bytes) cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock); spa->spa_load_verify_bytes += size; mutex_exit(&spa->spa_scrub_lock); zio_nowait(zio_read(rio, spa, bp, abd_alloc_for_io(size, B_FALSE), size, spa_load_verify_done, rio->io_private, ZIO_PRIORITY_SCRUB, ZIO_FLAG_SPECULATIVE | ZIO_FLAG_CANFAIL | ZIO_FLAG_SCRUB | ZIO_FLAG_RAW, zb)); return (0); } static int verify_dataset_name_len(dsl_pool_t *dp, dsl_dataset_t *ds, void *arg) { (void) dp, (void) arg; if (dsl_dataset_namelen(ds) >= ZFS_MAX_DATASET_NAME_LEN) return (SET_ERROR(ENAMETOOLONG)); return (0); } static int spa_load_verify(spa_t *spa) { zio_t *rio; spa_load_error_t sle = { 0 }; zpool_load_policy_t policy; boolean_t verify_ok = B_FALSE; int error = 0; zpool_get_load_policy(spa->spa_config, &policy); if (policy.zlp_rewind & ZPOOL_NEVER_REWIND || policy.zlp_maxmeta == UINT64_MAX) return (0); dsl_pool_config_enter(spa->spa_dsl_pool, FTAG); error = dmu_objset_find_dp(spa->spa_dsl_pool, spa->spa_dsl_pool->dp_root_dir_obj, verify_dataset_name_len, NULL, DS_FIND_CHILDREN); dsl_pool_config_exit(spa->spa_dsl_pool, FTAG); if (error != 0) return (error); /* * Verify data only if we are rewinding or error limit was set. * Otherwise nothing except dbgmsg care about it to waste time. */ sle.sle_verify_data = (policy.zlp_rewind & ZPOOL_REWIND_MASK) || (policy.zlp_maxdata < UINT64_MAX); rio = zio_root(spa, NULL, &sle, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE); if (spa_load_verify_metadata) { if (spa->spa_extreme_rewind) { spa_load_note(spa, "performing a complete scan of the " "pool since extreme rewind is on. This may take " "a very long time.\n (spa_load_verify_data=%u, " "spa_load_verify_metadata=%u)", spa_load_verify_data, spa_load_verify_metadata); } error = traverse_pool(spa, spa->spa_verify_min_txg, TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA | TRAVERSE_NO_DECRYPT, spa_load_verify_cb, rio); } (void) zio_wait(rio); ASSERT0(spa->spa_load_verify_bytes); spa->spa_load_meta_errors = sle.sle_meta_count; spa->spa_load_data_errors = sle.sle_data_count; if (sle.sle_meta_count != 0 || sle.sle_data_count != 0) { spa_load_note(spa, "spa_load_verify found %llu metadata errors " "and %llu data errors", (u_longlong_t)sle.sle_meta_count, (u_longlong_t)sle.sle_data_count); } if (spa_load_verify_dryrun || (!error && sle.sle_meta_count <= policy.zlp_maxmeta && sle.sle_data_count <= policy.zlp_maxdata)) { int64_t loss = 0; verify_ok = B_TRUE; spa->spa_load_txg = spa->spa_uberblock.ub_txg; spa->spa_load_txg_ts = spa->spa_uberblock.ub_timestamp; loss = spa->spa_last_ubsync_txg_ts - spa->spa_load_txg_ts; fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_LOAD_TIME, spa->spa_load_txg_ts); fnvlist_add_int64(spa->spa_load_info, ZPOOL_CONFIG_REWIND_TIME, loss); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_LOAD_META_ERRORS, sle.sle_meta_count); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_LOAD_DATA_ERRORS, sle.sle_data_count); } else { spa->spa_load_max_txg = spa->spa_uberblock.ub_txg; } if (spa_load_verify_dryrun) return (0); if (error) { if (error != ENXIO && error != EIO) error = SET_ERROR(EIO); return (error); } return (verify_ok ? 0 : EIO); } /* * Find a value in the pool props object. */ static void spa_prop_find(spa_t *spa, zpool_prop_t prop, uint64_t *val) { (void) zap_lookup(spa->spa_meta_objset, spa->spa_pool_props_object, zpool_prop_to_name(prop), sizeof (uint64_t), 1, val); } /* * Find a value in the pool directory object. */ static int spa_dir_prop(spa_t *spa, const char *name, uint64_t *val, boolean_t log_enoent) { int error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, name, sizeof (uint64_t), 1, val); if (error != 0 && (error != ENOENT || log_enoent)) { spa_load_failed(spa, "couldn't get '%s' value in MOS directory " "[error=%d]", name, error); } return (error); } static int spa_vdev_err(vdev_t *vdev, vdev_aux_t aux, int err) { vdev_set_state(vdev, B_TRUE, VDEV_STATE_CANT_OPEN, aux); return (SET_ERROR(err)); } boolean_t spa_livelist_delete_check(spa_t *spa) { return (spa->spa_livelists_to_delete != 0); } static boolean_t spa_livelist_delete_cb_check(void *arg, zthr_t *z) { (void) z; spa_t *spa = arg; return (spa_livelist_delete_check(spa)); } static int delete_blkptr_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx) { spa_t *spa = arg; zio_free(spa, tx->tx_txg, bp); dsl_dir_diduse_space(tx->tx_pool->dp_free_dir, DD_USED_HEAD, -bp_get_dsize_sync(spa, bp), -BP_GET_PSIZE(bp), -BP_GET_UCSIZE(bp), tx); return (0); } static int dsl_get_next_livelist_obj(objset_t *os, uint64_t zap_obj, uint64_t *llp) { int err; zap_cursor_t zc; zap_attribute_t za; zap_cursor_init(&zc, os, zap_obj); err = zap_cursor_retrieve(&zc, &za); zap_cursor_fini(&zc); if (err == 0) *llp = za.za_first_integer; return (err); } /* * Components of livelist deletion that must be performed in syncing * context: freeing block pointers and updating the pool-wide data * structures to indicate how much work is left to do */ typedef struct sublist_delete_arg { spa_t *spa; dsl_deadlist_t *ll; uint64_t key; bplist_t *to_free; } sublist_delete_arg_t; static void sublist_delete_sync(void *arg, dmu_tx_t *tx) { sublist_delete_arg_t *sda = arg; spa_t *spa = sda->spa; dsl_deadlist_t *ll = sda->ll; uint64_t key = sda->key; bplist_t *to_free = sda->to_free; bplist_iterate(to_free, delete_blkptr_cb, spa, tx); dsl_deadlist_remove_entry(ll, key, tx); } typedef struct livelist_delete_arg { spa_t *spa; uint64_t ll_obj; uint64_t zap_obj; } livelist_delete_arg_t; static void livelist_delete_sync(void *arg, dmu_tx_t *tx) { livelist_delete_arg_t *lda = arg; spa_t *spa = lda->spa; uint64_t ll_obj = lda->ll_obj; uint64_t zap_obj = lda->zap_obj; objset_t *mos = spa->spa_meta_objset; uint64_t count; /* free the livelist and decrement the feature count */ VERIFY0(zap_remove_int(mos, zap_obj, ll_obj, tx)); dsl_deadlist_free(mos, ll_obj, tx); spa_feature_decr(spa, SPA_FEATURE_LIVELIST, tx); VERIFY0(zap_count(mos, zap_obj, &count)); if (count == 0) { /* no more livelists to delete */ VERIFY0(zap_remove(mos, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DELETED_CLONES, tx)); VERIFY0(zap_destroy(mos, zap_obj, tx)); spa->spa_livelists_to_delete = 0; spa_notify_waiters(spa); } } /* * Load in the value for the livelist to be removed and open it. Then, * load its first sublist and determine which block pointers should actually * be freed. Then, call a synctask which performs the actual frees and updates * the pool-wide livelist data. */ static void spa_livelist_delete_cb(void *arg, zthr_t *z) { spa_t *spa = arg; uint64_t ll_obj = 0, count; objset_t *mos = spa->spa_meta_objset; uint64_t zap_obj = spa->spa_livelists_to_delete; /* * Determine the next livelist to delete. This function should only * be called if there is at least one deleted clone. */ VERIFY0(dsl_get_next_livelist_obj(mos, zap_obj, &ll_obj)); VERIFY0(zap_count(mos, ll_obj, &count)); if (count > 0) { dsl_deadlist_t *ll; dsl_deadlist_entry_t *dle; bplist_t to_free; ll = kmem_zalloc(sizeof (dsl_deadlist_t), KM_SLEEP); dsl_deadlist_open(ll, mos, ll_obj); dle = dsl_deadlist_first(ll); ASSERT3P(dle, !=, NULL); bplist_create(&to_free); int err = dsl_process_sub_livelist(&dle->dle_bpobj, &to_free, z, NULL); if (err == 0) { sublist_delete_arg_t sync_arg = { .spa = spa, .ll = ll, .key = dle->dle_mintxg, .to_free = &to_free }; zfs_dbgmsg("deleting sublist (id %llu) from" " livelist %llu, %lld remaining", (u_longlong_t)dle->dle_bpobj.bpo_object, (u_longlong_t)ll_obj, (longlong_t)count - 1); VERIFY0(dsl_sync_task(spa_name(spa), NULL, sublist_delete_sync, &sync_arg, 0, ZFS_SPACE_CHECK_DESTROY)); } else { VERIFY3U(err, ==, EINTR); } bplist_clear(&to_free); bplist_destroy(&to_free); dsl_deadlist_close(ll); kmem_free(ll, sizeof (dsl_deadlist_t)); } else { livelist_delete_arg_t sync_arg = { .spa = spa, .ll_obj = ll_obj, .zap_obj = zap_obj }; zfs_dbgmsg("deletion of livelist %llu completed", (u_longlong_t)ll_obj); VERIFY0(dsl_sync_task(spa_name(spa), NULL, livelist_delete_sync, &sync_arg, 0, ZFS_SPACE_CHECK_DESTROY)); } } static void spa_start_livelist_destroy_thread(spa_t *spa) { ASSERT3P(spa->spa_livelist_delete_zthr, ==, NULL); spa->spa_livelist_delete_zthr = zthr_create("z_livelist_destroy", spa_livelist_delete_cb_check, spa_livelist_delete_cb, spa, minclsyspri); } typedef struct livelist_new_arg { bplist_t *allocs; bplist_t *frees; } livelist_new_arg_t; static int livelist_track_new_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed, dmu_tx_t *tx) { ASSERT(tx == NULL); livelist_new_arg_t *lna = arg; if (bp_freed) { bplist_append(lna->frees, bp); } else { bplist_append(lna->allocs, bp); zfs_livelist_condense_new_alloc++; } return (0); } typedef struct livelist_condense_arg { spa_t *spa; bplist_t to_keep; uint64_t first_size; uint64_t next_size; } livelist_condense_arg_t; static void spa_livelist_condense_sync(void *arg, dmu_tx_t *tx) { livelist_condense_arg_t *lca = arg; spa_t *spa = lca->spa; bplist_t new_frees; dsl_dataset_t *ds = spa->spa_to_condense.ds; /* Have we been cancelled? */ if (spa->spa_to_condense.cancelled) { zfs_livelist_condense_sync_cancel++; goto out; } dsl_deadlist_entry_t *first = spa->spa_to_condense.first; dsl_deadlist_entry_t *next = spa->spa_to_condense.next; dsl_deadlist_t *ll = &ds->ds_dir->dd_livelist; /* * It's possible that the livelist was changed while the zthr was * running. Therefore, we need to check for new blkptrs in the two * entries being condensed and continue to track them in the livelist. * Because of the way we handle remapped blkptrs (see dbuf_remap_impl), * it's possible that the newly added blkptrs are FREEs or ALLOCs so * we need to sort them into two different bplists. */ uint64_t first_obj = first->dle_bpobj.bpo_object; uint64_t next_obj = next->dle_bpobj.bpo_object; uint64_t cur_first_size = first->dle_bpobj.bpo_phys->bpo_num_blkptrs; uint64_t cur_next_size = next->dle_bpobj.bpo_phys->bpo_num_blkptrs; bplist_create(&new_frees); livelist_new_arg_t new_bps = { .allocs = &lca->to_keep, .frees = &new_frees, }; if (cur_first_size > lca->first_size) { VERIFY0(livelist_bpobj_iterate_from_nofree(&first->dle_bpobj, livelist_track_new_cb, &new_bps, lca->first_size)); } if (cur_next_size > lca->next_size) { VERIFY0(livelist_bpobj_iterate_from_nofree(&next->dle_bpobj, livelist_track_new_cb, &new_bps, lca->next_size)); } dsl_deadlist_clear_entry(first, ll, tx); ASSERT(bpobj_is_empty(&first->dle_bpobj)); dsl_deadlist_remove_entry(ll, next->dle_mintxg, tx); bplist_iterate(&lca->to_keep, dsl_deadlist_insert_alloc_cb, ll, tx); bplist_iterate(&new_frees, dsl_deadlist_insert_free_cb, ll, tx); bplist_destroy(&new_frees); char dsname[ZFS_MAX_DATASET_NAME_LEN]; dsl_dataset_name(ds, dsname); zfs_dbgmsg("txg %llu condensing livelist of %s (id %llu), bpobj %llu " "(%llu blkptrs) and bpobj %llu (%llu blkptrs) -> bpobj %llu " "(%llu blkptrs)", (u_longlong_t)tx->tx_txg, dsname, (u_longlong_t)ds->ds_object, (u_longlong_t)first_obj, (u_longlong_t)cur_first_size, (u_longlong_t)next_obj, (u_longlong_t)cur_next_size, (u_longlong_t)first->dle_bpobj.bpo_object, (u_longlong_t)first->dle_bpobj.bpo_phys->bpo_num_blkptrs); out: dmu_buf_rele(ds->ds_dbuf, spa); spa->spa_to_condense.ds = NULL; bplist_clear(&lca->to_keep); bplist_destroy(&lca->to_keep); kmem_free(lca, sizeof (livelist_condense_arg_t)); spa->spa_to_condense.syncing = B_FALSE; } static void spa_livelist_condense_cb(void *arg, zthr_t *t) { while (zfs_livelist_condense_zthr_pause && !(zthr_has_waiters(t) || zthr_iscancelled(t))) delay(1); spa_t *spa = arg; dsl_deadlist_entry_t *first = spa->spa_to_condense.first; dsl_deadlist_entry_t *next = spa->spa_to_condense.next; uint64_t first_size, next_size; livelist_condense_arg_t *lca = kmem_alloc(sizeof (livelist_condense_arg_t), KM_SLEEP); bplist_create(&lca->to_keep); /* * Process the livelists (matching FREEs and ALLOCs) in open context * so we have minimal work in syncing context to condense. * * We save bpobj sizes (first_size and next_size) to use later in * syncing context to determine if entries were added to these sublists * while in open context. This is possible because the clone is still * active and open for normal writes and we want to make sure the new, * unprocessed blockpointers are inserted into the livelist normally. * * Note that dsl_process_sub_livelist() both stores the size number of * blockpointers and iterates over them while the bpobj's lock held, so * the sizes returned to us are consistent which what was actually * processed. */ int err = dsl_process_sub_livelist(&first->dle_bpobj, &lca->to_keep, t, &first_size); if (err == 0) err = dsl_process_sub_livelist(&next->dle_bpobj, &lca->to_keep, t, &next_size); if (err == 0) { while (zfs_livelist_condense_sync_pause && !(zthr_has_waiters(t) || zthr_iscancelled(t))) delay(1); dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); dmu_tx_mark_netfree(tx); dmu_tx_hold_space(tx, 1); err = dmu_tx_assign(tx, TXG_NOWAIT | TXG_NOTHROTTLE); if (err == 0) { /* * Prevent the condense zthr restarting before * the synctask completes. */ spa->spa_to_condense.syncing = B_TRUE; lca->spa = spa; lca->first_size = first_size; lca->next_size = next_size; dsl_sync_task_nowait(spa_get_dsl(spa), spa_livelist_condense_sync, lca, tx); dmu_tx_commit(tx); return; } } /* * Condensing can not continue: either it was externally stopped or * we were unable to assign to a tx because the pool has run out of * space. In the second case, we'll just end up trying to condense * again in a later txg. */ ASSERT(err != 0); bplist_clear(&lca->to_keep); bplist_destroy(&lca->to_keep); kmem_free(lca, sizeof (livelist_condense_arg_t)); dmu_buf_rele(spa->spa_to_condense.ds->ds_dbuf, spa); spa->spa_to_condense.ds = NULL; if (err == EINTR) zfs_livelist_condense_zthr_cancel++; } /* * Check that there is something to condense but that a condense is not * already in progress and that condensing has not been cancelled. */ static boolean_t spa_livelist_condense_cb_check(void *arg, zthr_t *z) { (void) z; spa_t *spa = arg; if ((spa->spa_to_condense.ds != NULL) && (spa->spa_to_condense.syncing == B_FALSE) && (spa->spa_to_condense.cancelled == B_FALSE)) { return (B_TRUE); } return (B_FALSE); } static void spa_start_livelist_condensing_thread(spa_t *spa) { spa->spa_to_condense.ds = NULL; spa->spa_to_condense.first = NULL; spa->spa_to_condense.next = NULL; spa->spa_to_condense.syncing = B_FALSE; spa->spa_to_condense.cancelled = B_FALSE; ASSERT3P(spa->spa_livelist_condense_zthr, ==, NULL); spa->spa_livelist_condense_zthr = zthr_create("z_livelist_condense", spa_livelist_condense_cb_check, spa_livelist_condense_cb, spa, minclsyspri); } static void spa_spawn_aux_threads(spa_t *spa) { ASSERT(spa_writeable(spa)); spa_start_raidz_expansion_thread(spa); spa_start_indirect_condensing_thread(spa); spa_start_livelist_destroy_thread(spa); spa_start_livelist_condensing_thread(spa); ASSERT3P(spa->spa_checkpoint_discard_zthr, ==, NULL); spa->spa_checkpoint_discard_zthr = zthr_create("z_checkpoint_discard", spa_checkpoint_discard_thread_check, spa_checkpoint_discard_thread, spa, minclsyspri); } /* * Fix up config after a partly-completed split. This is done with the * ZPOOL_CONFIG_SPLIT nvlist. Both the splitting pool and the split-off * pool have that entry in their config, but only the splitting one contains * a list of all the guids of the vdevs that are being split off. * * This function determines what to do with that list: either rejoin * all the disks to the pool, or complete the splitting process. To attempt * the rejoin, each disk that is offlined is marked online again, and * we do a reopen() call. If the vdev label for every disk that was * marked online indicates it was successfully split off (VDEV_AUX_SPLIT_POOL) * then we call vdev_split() on each disk, and complete the split. * * Otherwise we leave the config alone, with all the vdevs in place in * the original pool. */ static void spa_try_repair(spa_t *spa, nvlist_t *config) { uint_t extracted; uint64_t *glist; uint_t i, gcount; nvlist_t *nvl; vdev_t **vd; boolean_t attempt_reopen; if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_SPLIT, &nvl) != 0) return; /* check that the config is complete */ if (nvlist_lookup_uint64_array(nvl, ZPOOL_CONFIG_SPLIT_LIST, &glist, &gcount) != 0) return; vd = kmem_zalloc(gcount * sizeof (vdev_t *), KM_SLEEP); /* attempt to online all the vdevs & validate */ attempt_reopen = B_TRUE; for (i = 0; i < gcount; i++) { if (glist[i] == 0) /* vdev is hole */ continue; vd[i] = spa_lookup_by_guid(spa, glist[i], B_FALSE); if (vd[i] == NULL) { /* * Don't bother attempting to reopen the disks; * just do the split. */ attempt_reopen = B_FALSE; } else { /* attempt to re-online it */ vd[i]->vdev_offline = B_FALSE; } } if (attempt_reopen) { vdev_reopen(spa->spa_root_vdev); /* check each device to see what state it's in */ for (extracted = 0, i = 0; i < gcount; i++) { if (vd[i] != NULL && vd[i]->vdev_stat.vs_aux != VDEV_AUX_SPLIT_POOL) break; ++extracted; } } /* * If every disk has been moved to the new pool, or if we never * even attempted to look at them, then we split them off for * good. */ if (!attempt_reopen || gcount == extracted) { for (i = 0; i < gcount; i++) if (vd[i] != NULL) vdev_split(vd[i]); vdev_reopen(spa->spa_root_vdev); } kmem_free(vd, gcount * sizeof (vdev_t *)); } static int spa_load(spa_t *spa, spa_load_state_t state, spa_import_type_t type) { const char *ereport = FM_EREPORT_ZFS_POOL; int error; spa->spa_load_state = state; (void) spa_import_progress_set_state(spa_guid(spa), spa_load_state(spa)); spa_import_progress_set_notes(spa, "spa_load()"); gethrestime(&spa->spa_loaded_ts); error = spa_load_impl(spa, type, &ereport); /* * Don't count references from objsets that are already closed * and are making their way through the eviction process. */ spa_evicting_os_wait(spa); spa->spa_minref = zfs_refcount_count(&spa->spa_refcount); if (error) { if (error != EEXIST) { spa->spa_loaded_ts.tv_sec = 0; spa->spa_loaded_ts.tv_nsec = 0; } if (error != EBADF) { (void) zfs_ereport_post(ereport, spa, NULL, NULL, NULL, 0); } } spa->spa_load_state = error ? SPA_LOAD_ERROR : SPA_LOAD_NONE; spa->spa_ena = 0; (void) spa_import_progress_set_state(spa_guid(spa), spa_load_state(spa)); return (error); } #ifdef ZFS_DEBUG /* * Count the number of per-vdev ZAPs associated with all of the vdevs in the * vdev tree rooted in the given vd, and ensure that each ZAP is present in the * spa's per-vdev ZAP list. */ static uint64_t vdev_count_verify_zaps(vdev_t *vd) { spa_t *spa = vd->vdev_spa; uint64_t total = 0; if (spa_feature_is_active(vd->vdev_spa, SPA_FEATURE_AVZ_V2) && vd->vdev_root_zap != 0) { total++; ASSERT0(zap_lookup_int(spa->spa_meta_objset, spa->spa_all_vdev_zaps, vd->vdev_root_zap)); } if (vd->vdev_top_zap != 0) { total++; ASSERT0(zap_lookup_int(spa->spa_meta_objset, spa->spa_all_vdev_zaps, vd->vdev_top_zap)); } if (vd->vdev_leaf_zap != 0) { total++; ASSERT0(zap_lookup_int(spa->spa_meta_objset, spa->spa_all_vdev_zaps, vd->vdev_leaf_zap)); } for (uint64_t i = 0; i < vd->vdev_children; i++) { total += vdev_count_verify_zaps(vd->vdev_child[i]); } return (total); } #else #define vdev_count_verify_zaps(vd) ((void) sizeof (vd), 0) #endif /* * Determine whether the activity check is required. */ static boolean_t spa_activity_check_required(spa_t *spa, uberblock_t *ub, nvlist_t *label, nvlist_t *config) { uint64_t state = 0; uint64_t hostid = 0; uint64_t tryconfig_txg = 0; uint64_t tryconfig_timestamp = 0; uint16_t tryconfig_mmp_seq = 0; nvlist_t *nvinfo; if (nvlist_exists(config, ZPOOL_CONFIG_LOAD_INFO)) { nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO); (void) nvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_TXG, &tryconfig_txg); (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_TIMESTAMP, &tryconfig_timestamp); (void) nvlist_lookup_uint16(nvinfo, ZPOOL_CONFIG_MMP_SEQ, &tryconfig_mmp_seq); } (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state); /* * Disable the MMP activity check - This is used by zdb which * is intended to be used on potentially active pools. */ if (spa->spa_import_flags & ZFS_IMPORT_SKIP_MMP) return (B_FALSE); /* * Skip the activity check when the MMP feature is disabled. */ if (ub->ub_mmp_magic == MMP_MAGIC && ub->ub_mmp_delay == 0) return (B_FALSE); /* * If the tryconfig_ values are nonzero, they are the results of an * earlier tryimport. If they all match the uberblock we just found, * then the pool has not changed and we return false so we do not test * a second time. */ if (tryconfig_txg && tryconfig_txg == ub->ub_txg && tryconfig_timestamp && tryconfig_timestamp == ub->ub_timestamp && tryconfig_mmp_seq && tryconfig_mmp_seq == (MMP_SEQ_VALID(ub) ? MMP_SEQ(ub) : 0)) return (B_FALSE); /* * Allow the activity check to be skipped when importing the pool * on the same host which last imported it. Since the hostid from * configuration may be stale use the one read from the label. */ if (nvlist_exists(label, ZPOOL_CONFIG_HOSTID)) hostid = fnvlist_lookup_uint64(label, ZPOOL_CONFIG_HOSTID); if (hostid == spa_get_hostid(spa)) return (B_FALSE); /* * Skip the activity test when the pool was cleanly exported. */ if (state != POOL_STATE_ACTIVE) return (B_FALSE); return (B_TRUE); } /* * Nanoseconds the activity check must watch for changes on-disk. */ static uint64_t spa_activity_check_duration(spa_t *spa, uberblock_t *ub) { uint64_t import_intervals = MAX(zfs_multihost_import_intervals, 1); uint64_t multihost_interval = MSEC2NSEC( MMP_INTERVAL_OK(zfs_multihost_interval)); uint64_t import_delay = MAX(NANOSEC, import_intervals * multihost_interval); /* * Local tunables determine a minimum duration except for the case * where we know when the remote host will suspend the pool if MMP * writes do not land. * * See Big Theory comment at the top of mmp.c for the reasoning behind * these cases and times. */ ASSERT(MMP_IMPORT_SAFETY_FACTOR >= 100); if (MMP_INTERVAL_VALID(ub) && MMP_FAIL_INT_VALID(ub) && MMP_FAIL_INT(ub) > 0) { /* MMP on remote host will suspend pool after failed writes */ import_delay = MMP_FAIL_INT(ub) * MSEC2NSEC(MMP_INTERVAL(ub)) * MMP_IMPORT_SAFETY_FACTOR / 100; zfs_dbgmsg("fail_intvals>0 import_delay=%llu ub_mmp " "mmp_fails=%llu ub_mmp mmp_interval=%llu " "import_intervals=%llu", (u_longlong_t)import_delay, (u_longlong_t)MMP_FAIL_INT(ub), (u_longlong_t)MMP_INTERVAL(ub), (u_longlong_t)import_intervals); } else if (MMP_INTERVAL_VALID(ub) && MMP_FAIL_INT_VALID(ub) && MMP_FAIL_INT(ub) == 0) { /* MMP on remote host will never suspend pool */ import_delay = MAX(import_delay, (MSEC2NSEC(MMP_INTERVAL(ub)) + ub->ub_mmp_delay) * import_intervals); zfs_dbgmsg("fail_intvals=0 import_delay=%llu ub_mmp " "mmp_interval=%llu ub_mmp_delay=%llu " "import_intervals=%llu", (u_longlong_t)import_delay, (u_longlong_t)MMP_INTERVAL(ub), (u_longlong_t)ub->ub_mmp_delay, (u_longlong_t)import_intervals); } else if (MMP_VALID(ub)) { /* * zfs-0.7 compatibility case */ import_delay = MAX(import_delay, (multihost_interval + ub->ub_mmp_delay) * import_intervals); zfs_dbgmsg("import_delay=%llu ub_mmp_delay=%llu " "import_intervals=%llu leaves=%u", (u_longlong_t)import_delay, (u_longlong_t)ub->ub_mmp_delay, (u_longlong_t)import_intervals, vdev_count_leaves(spa)); } else { /* Using local tunings is the only reasonable option */ zfs_dbgmsg("pool last imported on non-MMP aware " "host using import_delay=%llu multihost_interval=%llu " "import_intervals=%llu", (u_longlong_t)import_delay, (u_longlong_t)multihost_interval, (u_longlong_t)import_intervals); } return (import_delay); } /* * Remote host activity check. * * error results: * 0 - no activity detected * EREMOTEIO - remote activity detected * EINTR - user canceled the operation */ static int spa_activity_check(spa_t *spa, uberblock_t *ub, nvlist_t *config, boolean_t importing) { uint64_t txg = ub->ub_txg; uint64_t timestamp = ub->ub_timestamp; uint64_t mmp_config = ub->ub_mmp_config; uint16_t mmp_seq = MMP_SEQ_VALID(ub) ? MMP_SEQ(ub) : 0; uint64_t import_delay; hrtime_t import_expire, now; nvlist_t *mmp_label = NULL; vdev_t *rvd = spa->spa_root_vdev; kcondvar_t cv; kmutex_t mtx; int error = 0; cv_init(&cv, NULL, CV_DEFAULT, NULL); mutex_init(&mtx, NULL, MUTEX_DEFAULT, NULL); mutex_enter(&mtx); /* * If ZPOOL_CONFIG_MMP_TXG is present an activity check was performed * during the earlier tryimport. If the txg recorded there is 0 then * the pool is known to be active on another host. * * Otherwise, the pool might be in use on another host. Check for * changes in the uberblocks on disk if necessary. */ if (nvlist_exists(config, ZPOOL_CONFIG_LOAD_INFO)) { nvlist_t *nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO); if (nvlist_exists(nvinfo, ZPOOL_CONFIG_MMP_TXG) && fnvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_TXG) == 0) { vdev_uberblock_load(rvd, ub, &mmp_label); error = SET_ERROR(EREMOTEIO); goto out; } } import_delay = spa_activity_check_duration(spa, ub); /* Add a small random factor in case of simultaneous imports (0-25%) */ import_delay += import_delay * random_in_range(250) / 1000; import_expire = gethrtime() + import_delay; if (importing) { spa_import_progress_set_notes(spa, "Checking MMP activity, " "waiting %llu ms", (u_longlong_t)NSEC2MSEC(import_delay)); } int iterations = 0; while ((now = gethrtime()) < import_expire) { if (importing && iterations++ % 30 == 0) { spa_import_progress_set_notes(spa, "Checking MMP " "activity, %llu ms remaining", (u_longlong_t)NSEC2MSEC(import_expire - now)); } if (importing) { (void) spa_import_progress_set_mmp_check(spa_guid(spa), NSEC2SEC(import_expire - gethrtime())); } vdev_uberblock_load(rvd, ub, &mmp_label); if (txg != ub->ub_txg || timestamp != ub->ub_timestamp || mmp_seq != (MMP_SEQ_VALID(ub) ? MMP_SEQ(ub) : 0)) { zfs_dbgmsg("multihost activity detected " "txg %llu ub_txg %llu " "timestamp %llu ub_timestamp %llu " "mmp_config %#llx ub_mmp_config %#llx", (u_longlong_t)txg, (u_longlong_t)ub->ub_txg, (u_longlong_t)timestamp, (u_longlong_t)ub->ub_timestamp, (u_longlong_t)mmp_config, (u_longlong_t)ub->ub_mmp_config); error = SET_ERROR(EREMOTEIO); break; } if (mmp_label) { nvlist_free(mmp_label); mmp_label = NULL; } error = cv_timedwait_sig(&cv, &mtx, ddi_get_lbolt() + hz); if (error != -1) { error = SET_ERROR(EINTR); break; } error = 0; } out: mutex_exit(&mtx); mutex_destroy(&mtx); cv_destroy(&cv); /* * If the pool is determined to be active store the status in the * spa->spa_load_info nvlist. If the remote hostname or hostid are * available from configuration read from disk store them as well. * This allows 'zpool import' to generate a more useful message. * * ZPOOL_CONFIG_MMP_STATE - observed pool status (mandatory) * ZPOOL_CONFIG_MMP_HOSTNAME - hostname from the active pool * ZPOOL_CONFIG_MMP_HOSTID - hostid from the active pool */ if (error == EREMOTEIO) { const char *hostname = ""; uint64_t hostid = 0; if (mmp_label) { if (nvlist_exists(mmp_label, ZPOOL_CONFIG_HOSTNAME)) { hostname = fnvlist_lookup_string(mmp_label, ZPOOL_CONFIG_HOSTNAME); fnvlist_add_string(spa->spa_load_info, ZPOOL_CONFIG_MMP_HOSTNAME, hostname); } if (nvlist_exists(mmp_label, ZPOOL_CONFIG_HOSTID)) { hostid = fnvlist_lookup_uint64(mmp_label, ZPOOL_CONFIG_HOSTID); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_HOSTID, hostid); } } fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_STATE, MMP_STATE_ACTIVE); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_TXG, 0); error = spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO); } if (mmp_label) nvlist_free(mmp_label); return (error); } /* * Called from zfs_ioc_clear for a pool that was suspended * after failing mmp write checks. */ boolean_t spa_mmp_remote_host_activity(spa_t *spa) { ASSERT(spa_multihost(spa) && spa_suspended(spa)); nvlist_t *best_label; uberblock_t best_ub; /* * Locate the best uberblock on disk */ vdev_uberblock_load(spa->spa_root_vdev, &best_ub, &best_label); if (best_label) { /* * confirm that the best hostid matches our hostid */ if (nvlist_exists(best_label, ZPOOL_CONFIG_HOSTID) && spa_get_hostid(spa) != fnvlist_lookup_uint64(best_label, ZPOOL_CONFIG_HOSTID)) { nvlist_free(best_label); return (B_TRUE); } nvlist_free(best_label); } else { return (B_TRUE); } if (!MMP_VALID(&best_ub) || !MMP_FAIL_INT_VALID(&best_ub) || MMP_FAIL_INT(&best_ub) == 0) { return (B_TRUE); } if (best_ub.ub_txg != spa->spa_uberblock.ub_txg || best_ub.ub_timestamp != spa->spa_uberblock.ub_timestamp) { zfs_dbgmsg("txg mismatch detected during pool clear " "txg %llu ub_txg %llu timestamp %llu ub_timestamp %llu", (u_longlong_t)spa->spa_uberblock.ub_txg, (u_longlong_t)best_ub.ub_txg, (u_longlong_t)spa->spa_uberblock.ub_timestamp, (u_longlong_t)best_ub.ub_timestamp); return (B_TRUE); } /* * Perform an activity check looking for any remote writer */ return (spa_activity_check(spa, &spa->spa_uberblock, spa->spa_config, B_FALSE) != 0); } static int spa_verify_host(spa_t *spa, nvlist_t *mos_config) { uint64_t hostid; const char *hostname; uint64_t myhostid = 0; if (!spa_is_root(spa) && nvlist_lookup_uint64(mos_config, ZPOOL_CONFIG_HOSTID, &hostid) == 0) { hostname = fnvlist_lookup_string(mos_config, ZPOOL_CONFIG_HOSTNAME); myhostid = zone_get_hostid(NULL); if (hostid != 0 && myhostid != 0 && hostid != myhostid) { cmn_err(CE_WARN, "pool '%s' could not be " "loaded as it was last accessed by " "another system (host: %s hostid: 0x%llx). " "See: https://openzfs.github.io/openzfs-docs/msg/" "ZFS-8000-EY", spa_name(spa), hostname, (u_longlong_t)hostid); spa_load_failed(spa, "hostid verification failed: pool " "last accessed by host: %s (hostid: 0x%llx)", hostname, (u_longlong_t)hostid); return (SET_ERROR(EBADF)); } } return (0); } static int spa_ld_parse_config(spa_t *spa, spa_import_type_t type) { int error = 0; nvlist_t *nvtree, *nvl, *config = spa->spa_config; int parse; vdev_t *rvd; uint64_t pool_guid; const char *comment; const char *compatibility; /* * Versioning wasn't explicitly added to the label until later, so if * it's not present treat it as the initial version. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &spa->spa_ubsync.ub_version) != 0) spa->spa_ubsync.ub_version = SPA_VERSION_INITIAL; if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &pool_guid)) { spa_load_failed(spa, "invalid config provided: '%s' missing", ZPOOL_CONFIG_POOL_GUID); return (SET_ERROR(EINVAL)); } /* * If we are doing an import, ensure that the pool is not already * imported by checking if its pool guid already exists in the * spa namespace. * * The only case that we allow an already imported pool to be * imported again, is when the pool is checkpointed and we want to * look at its checkpointed state from userland tools like zdb. */ #ifdef _KERNEL if ((spa->spa_load_state == SPA_LOAD_IMPORT || spa->spa_load_state == SPA_LOAD_TRYIMPORT) && spa_guid_exists(pool_guid, 0)) { #else if ((spa->spa_load_state == SPA_LOAD_IMPORT || spa->spa_load_state == SPA_LOAD_TRYIMPORT) && spa_guid_exists(pool_guid, 0) && !spa_importing_readonly_checkpoint(spa)) { #endif spa_load_failed(spa, "a pool with guid %llu is already open", (u_longlong_t)pool_guid); return (SET_ERROR(EEXIST)); } spa->spa_config_guid = pool_guid; nvlist_free(spa->spa_load_info); spa->spa_load_info = fnvlist_alloc(); ASSERT(spa->spa_comment == NULL); if (nvlist_lookup_string(config, ZPOOL_CONFIG_COMMENT, &comment) == 0) spa->spa_comment = spa_strdup(comment); ASSERT(spa->spa_compatibility == NULL); if (nvlist_lookup_string(config, ZPOOL_CONFIG_COMPATIBILITY, &compatibility) == 0) spa->spa_compatibility = spa_strdup(compatibility); (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_TXG, &spa->spa_config_txg); if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_SPLIT, &nvl) == 0) spa->spa_config_splitting = fnvlist_dup(nvl); if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvtree)) { spa_load_failed(spa, "invalid config provided: '%s' missing", ZPOOL_CONFIG_VDEV_TREE); return (SET_ERROR(EINVAL)); } /* * Create "The Godfather" zio to hold all async IOs */ spa->spa_async_zio_root = kmem_alloc(max_ncpus * sizeof (void *), KM_SLEEP); for (int i = 0; i < max_ncpus; i++) { spa->spa_async_zio_root[i] = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_GODFATHER); } /* * Parse the configuration into a vdev tree. We explicitly set the * value that will be returned by spa_version() since parsing the * configuration requires knowing the version number. */ spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); parse = (type == SPA_IMPORT_EXISTING ? VDEV_ALLOC_LOAD : VDEV_ALLOC_SPLIT); error = spa_config_parse(spa, &rvd, nvtree, NULL, 0, parse); spa_config_exit(spa, SCL_ALL, FTAG); if (error != 0) { spa_load_failed(spa, "unable to parse config [error=%d]", error); return (error); } ASSERT(spa->spa_root_vdev == rvd); ASSERT3U(spa->spa_min_ashift, >=, SPA_MINBLOCKSHIFT); ASSERT3U(spa->spa_max_ashift, <=, SPA_MAXBLOCKSHIFT); if (type != SPA_IMPORT_ASSEMBLE) { ASSERT(spa_guid(spa) == pool_guid); } return (0); } /* * Recursively open all vdevs in the vdev tree. This function is called twice: * first with the untrusted config, then with the trusted config. */ static int spa_ld_open_vdevs(spa_t *spa) { int error = 0; /* * spa_missing_tvds_allowed defines how many top-level vdevs can be * missing/unopenable for the root vdev to be still considered openable. */ if (spa->spa_trust_config) { spa->spa_missing_tvds_allowed = zfs_max_missing_tvds; } else if (spa->spa_config_source == SPA_CONFIG_SRC_CACHEFILE) { spa->spa_missing_tvds_allowed = zfs_max_missing_tvds_cachefile; } else if (spa->spa_config_source == SPA_CONFIG_SRC_SCAN) { spa->spa_missing_tvds_allowed = zfs_max_missing_tvds_scan; } else { spa->spa_missing_tvds_allowed = 0; } spa->spa_missing_tvds_allowed = MAX(zfs_max_missing_tvds, spa->spa_missing_tvds_allowed); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); error = vdev_open(spa->spa_root_vdev); spa_config_exit(spa, SCL_ALL, FTAG); if (spa->spa_missing_tvds != 0) { spa_load_note(spa, "vdev tree has %lld missing top-level " "vdevs.", (u_longlong_t)spa->spa_missing_tvds); if (spa->spa_trust_config && (spa->spa_mode & SPA_MODE_WRITE)) { /* * Although theoretically we could allow users to open * incomplete pools in RW mode, we'd need to add a lot * of extra logic (e.g. adjust pool space to account * for missing vdevs). * This limitation also prevents users from accidentally * opening the pool in RW mode during data recovery and * damaging it further. */ spa_load_note(spa, "pools with missing top-level " "vdevs can only be opened in read-only mode."); error = SET_ERROR(ENXIO); } else { spa_load_note(spa, "current settings allow for maximum " "%lld missing top-level vdevs at this stage.", (u_longlong_t)spa->spa_missing_tvds_allowed); } } if (error != 0) { spa_load_failed(spa, "unable to open vdev tree [error=%d]", error); } if (spa->spa_missing_tvds != 0 || error != 0) vdev_dbgmsg_print_tree(spa->spa_root_vdev, 2); return (error); } /* * We need to validate the vdev labels against the configuration that * we have in hand. This function is called twice: first with an untrusted * config, then with a trusted config. The validation is more strict when the * config is trusted. */ static int spa_ld_validate_vdevs(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); error = vdev_validate(rvd); spa_config_exit(spa, SCL_ALL, FTAG); if (error != 0) { spa_load_failed(spa, "vdev_validate failed [error=%d]", error); return (error); } if (rvd->vdev_state <= VDEV_STATE_CANT_OPEN) { spa_load_failed(spa, "cannot open vdev tree after invalidating " "some vdevs"); vdev_dbgmsg_print_tree(rvd, 2); return (SET_ERROR(ENXIO)); } return (0); } static void spa_ld_select_uberblock_done(spa_t *spa, uberblock_t *ub) { spa->spa_state = POOL_STATE_ACTIVE; spa->spa_ubsync = spa->spa_uberblock; spa->spa_verify_min_txg = spa->spa_extreme_rewind ? TXG_INITIAL - 1 : spa_last_synced_txg(spa) - TXG_DEFER_SIZE - 1; spa->spa_first_txg = spa->spa_last_ubsync_txg ? spa->spa_last_ubsync_txg : spa_last_synced_txg(spa) + 1; spa->spa_claim_max_txg = spa->spa_first_txg; spa->spa_prev_software_version = ub->ub_software_version; } static int spa_ld_select_uberblock(spa_t *spa, spa_import_type_t type) { vdev_t *rvd = spa->spa_root_vdev; nvlist_t *label; uberblock_t *ub = &spa->spa_uberblock; boolean_t activity_check = B_FALSE; /* * If we are opening the checkpointed state of the pool by * rewinding to it, at this point we will have written the * checkpointed uberblock to the vdev labels, so searching * the labels will find the right uberblock. However, if * we are opening the checkpointed state read-only, we have * not modified the labels. Therefore, we must ignore the * labels and continue using the spa_uberblock that was set * by spa_ld_checkpoint_rewind. * * Note that it would be fine to ignore the labels when * rewinding (opening writeable) as well. However, if we * crash just after writing the labels, we will end up * searching the labels. Doing so in the common case means * that this code path gets exercised normally, rather than * just in the edge case. */ if (ub->ub_checkpoint_txg != 0 && spa_importing_readonly_checkpoint(spa)) { spa_ld_select_uberblock_done(spa, ub); return (0); } /* * Find the best uberblock. */ vdev_uberblock_load(rvd, ub, &label); /* * If we weren't able to find a single valid uberblock, return failure. */ if (ub->ub_txg == 0) { nvlist_free(label); spa_load_failed(spa, "no valid uberblock found"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, ENXIO)); } if (spa->spa_load_max_txg != UINT64_MAX) { (void) spa_import_progress_set_max_txg(spa_guid(spa), (u_longlong_t)spa->spa_load_max_txg); } spa_load_note(spa, "using uberblock with txg=%llu", (u_longlong_t)ub->ub_txg); if (ub->ub_raidz_reflow_info != 0) { spa_load_note(spa, "uberblock raidz_reflow_info: " "state=%u offset=%llu", (int)RRSS_GET_STATE(ub), (u_longlong_t)RRSS_GET_OFFSET(ub)); } /* * For pools which have the multihost property on determine if the * pool is truly inactive and can be safely imported. Prevent * hosts which don't have a hostid set from importing the pool. */ activity_check = spa_activity_check_required(spa, ub, label, spa->spa_config); if (activity_check) { if (ub->ub_mmp_magic == MMP_MAGIC && ub->ub_mmp_delay && spa_get_hostid(spa) == 0) { nvlist_free(label); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_STATE, MMP_STATE_NO_HOSTID); return (spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO)); } int error = spa_activity_check(spa, ub, spa->spa_config, B_TRUE); if (error) { nvlist_free(label); return (error); } fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_STATE, MMP_STATE_INACTIVE); fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_TXG, ub->ub_txg); fnvlist_add_uint16(spa->spa_load_info, ZPOOL_CONFIG_MMP_SEQ, (MMP_SEQ_VALID(ub) ? MMP_SEQ(ub) : 0)); } /* * If the pool has an unsupported version we can't open it. */ if (!SPA_VERSION_IS_SUPPORTED(ub->ub_version)) { nvlist_free(label); spa_load_failed(spa, "version %llu is not supported", (u_longlong_t)ub->ub_version); return (spa_vdev_err(rvd, VDEV_AUX_VERSION_NEWER, ENOTSUP)); } if (ub->ub_version >= SPA_VERSION_FEATURES) { nvlist_t *features; /* * If we weren't able to find what's necessary for reading the * MOS in the label, return failure. */ if (label == NULL) { spa_load_failed(spa, "label config unavailable"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, ENXIO)); } if (nvlist_lookup_nvlist(label, ZPOOL_CONFIG_FEATURES_FOR_READ, &features) != 0) { nvlist_free(label); spa_load_failed(spa, "invalid label: '%s' missing", ZPOOL_CONFIG_FEATURES_FOR_READ); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, ENXIO)); } /* * Update our in-core representation with the definitive values * from the label. */ nvlist_free(spa->spa_label_features); spa->spa_label_features = fnvlist_dup(features); } nvlist_free(label); /* * Look through entries in the label nvlist's features_for_read. If * there is a feature listed there which we don't understand then we * cannot open a pool. */ if (ub->ub_version >= SPA_VERSION_FEATURES) { nvlist_t *unsup_feat; unsup_feat = fnvlist_alloc(); for (nvpair_t *nvp = nvlist_next_nvpair(spa->spa_label_features, NULL); nvp != NULL; nvp = nvlist_next_nvpair(spa->spa_label_features, nvp)) { if (!zfeature_is_supported(nvpair_name(nvp))) { fnvlist_add_string(unsup_feat, nvpair_name(nvp), ""); } } if (!nvlist_empty(unsup_feat)) { fnvlist_add_nvlist(spa->spa_load_info, ZPOOL_CONFIG_UNSUP_FEAT, unsup_feat); nvlist_free(unsup_feat); spa_load_failed(spa, "some features are unsupported"); return (spa_vdev_err(rvd, VDEV_AUX_UNSUP_FEAT, ENOTSUP)); } nvlist_free(unsup_feat); } if (type != SPA_IMPORT_ASSEMBLE && spa->spa_config_splitting) { spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_try_repair(spa, spa->spa_config); spa_config_exit(spa, SCL_ALL, FTAG); nvlist_free(spa->spa_config_splitting); spa->spa_config_splitting = NULL; } /* * Initialize internal SPA structures. */ spa_ld_select_uberblock_done(spa, ub); return (0); } static int spa_ld_open_rootbp(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; error = dsl_pool_init(spa, spa->spa_first_txg, &spa->spa_dsl_pool); if (error != 0) { spa_load_failed(spa, "unable to open rootbp in dsl_pool_init " "[error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } spa->spa_meta_objset = spa->spa_dsl_pool->dp_meta_objset; return (0); } static int spa_ld_trusted_config(spa_t *spa, spa_import_type_t type, boolean_t reloading) { vdev_t *mrvd, *rvd = spa->spa_root_vdev; nvlist_t *nv, *mos_config, *policy; int error = 0, copy_error; uint64_t healthy_tvds, healthy_tvds_mos; uint64_t mos_config_txg; if (spa_dir_prop(spa, DMU_POOL_CONFIG, &spa->spa_config_object, B_TRUE) != 0) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); /* * If we're assembling a pool from a split, the config provided is * already trusted so there is nothing to do. */ if (type == SPA_IMPORT_ASSEMBLE) return (0); healthy_tvds = spa_healthy_core_tvds(spa); if (load_nvlist(spa, spa->spa_config_object, &mos_config) != 0) { spa_load_failed(spa, "unable to retrieve MOS config"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } /* * If we are doing an open, pool owner wasn't verified yet, thus do * the verification here. */ if (spa->spa_load_state == SPA_LOAD_OPEN) { error = spa_verify_host(spa, mos_config); if (error != 0) { nvlist_free(mos_config); return (error); } } nv = fnvlist_lookup_nvlist(mos_config, ZPOOL_CONFIG_VDEV_TREE); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); /* * Build a new vdev tree from the trusted config */ error = spa_config_parse(spa, &mrvd, nv, NULL, 0, VDEV_ALLOC_LOAD); if (error != 0) { nvlist_free(mos_config); spa_config_exit(spa, SCL_ALL, FTAG); spa_load_failed(spa, "spa_config_parse failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error)); } /* * Vdev paths in the MOS may be obsolete. If the untrusted config was * obtained by scanning /dev/dsk, then it will have the right vdev * paths. We update the trusted MOS config with this information. * We first try to copy the paths with vdev_copy_path_strict, which * succeeds only when both configs have exactly the same vdev tree. * If that fails, we fall back to a more flexible method that has a * best effort policy. */ copy_error = vdev_copy_path_strict(rvd, mrvd); if (copy_error != 0 || spa_load_print_vdev_tree) { spa_load_note(spa, "provided vdev tree:"); vdev_dbgmsg_print_tree(rvd, 2); spa_load_note(spa, "MOS vdev tree:"); vdev_dbgmsg_print_tree(mrvd, 2); } if (copy_error != 0) { spa_load_note(spa, "vdev_copy_path_strict failed, falling " "back to vdev_copy_path_relaxed"); vdev_copy_path_relaxed(rvd, mrvd); } vdev_close(rvd); vdev_free(rvd); spa->spa_root_vdev = mrvd; rvd = mrvd; spa_config_exit(spa, SCL_ALL, FTAG); /* * If 'zpool import' used a cached config, then the on-disk hostid and * hostname may be different to the cached config in ways that should * prevent import. Userspace can't discover this without a scan, but * we know, so we add these values to LOAD_INFO so the caller can know * the difference. * * Note that we have to do this before the config is regenerated, * because the new config will have the hostid and hostname for this * host, in readiness for import. */ if (nvlist_exists(mos_config, ZPOOL_CONFIG_HOSTID)) fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_HOSTID, fnvlist_lookup_uint64(mos_config, ZPOOL_CONFIG_HOSTID)); if (nvlist_exists(mos_config, ZPOOL_CONFIG_HOSTNAME)) fnvlist_add_string(spa->spa_load_info, ZPOOL_CONFIG_HOSTNAME, fnvlist_lookup_string(mos_config, ZPOOL_CONFIG_HOSTNAME)); /* * We will use spa_config if we decide to reload the spa or if spa_load * fails and we rewind. We must thus regenerate the config using the * MOS information with the updated paths. ZPOOL_LOAD_POLICY is used to * pass settings on how to load the pool and is not stored in the MOS. * We copy it over to our new, trusted config. */ mos_config_txg = fnvlist_lookup_uint64(mos_config, ZPOOL_CONFIG_POOL_TXG); nvlist_free(mos_config); mos_config = spa_config_generate(spa, NULL, mos_config_txg, B_FALSE); if (nvlist_lookup_nvlist(spa->spa_config, ZPOOL_LOAD_POLICY, &policy) == 0) fnvlist_add_nvlist(mos_config, ZPOOL_LOAD_POLICY, policy); spa_config_set(spa, mos_config); spa->spa_config_source = SPA_CONFIG_SRC_MOS; /* * Now that we got the config from the MOS, we should be more strict * in checking blkptrs and can make assumptions about the consistency * of the vdev tree. spa_trust_config must be set to true before opening * vdevs in order for them to be writeable. */ spa->spa_trust_config = B_TRUE; /* * Open and validate the new vdev tree */ error = spa_ld_open_vdevs(spa); if (error != 0) return (error); error = spa_ld_validate_vdevs(spa); if (error != 0) return (error); if (copy_error != 0 || spa_load_print_vdev_tree) { spa_load_note(spa, "final vdev tree:"); vdev_dbgmsg_print_tree(rvd, 2); } if (spa->spa_load_state != SPA_LOAD_TRYIMPORT && !spa->spa_extreme_rewind && zfs_max_missing_tvds == 0) { /* * Sanity check to make sure that we are indeed loading the * latest uberblock. If we missed SPA_SYNC_MIN_VDEVS tvds * in the config provided and they happened to be the only ones * to have the latest uberblock, we could involuntarily perform * an extreme rewind. */ healthy_tvds_mos = spa_healthy_core_tvds(spa); if (healthy_tvds_mos - healthy_tvds >= SPA_SYNC_MIN_VDEVS) { spa_load_note(spa, "config provided misses too many " "top-level vdevs compared to MOS (%lld vs %lld). ", (u_longlong_t)healthy_tvds, (u_longlong_t)healthy_tvds_mos); spa_load_note(spa, "vdev tree:"); vdev_dbgmsg_print_tree(rvd, 2); if (reloading) { spa_load_failed(spa, "config was already " "provided from MOS. Aborting."); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } spa_load_note(spa, "spa must be reloaded using MOS " "config"); return (SET_ERROR(EAGAIN)); } } error = spa_check_for_missing_logs(spa); if (error != 0) return (spa_vdev_err(rvd, VDEV_AUX_BAD_GUID_SUM, ENXIO)); if (rvd->vdev_guid_sum != spa->spa_uberblock.ub_guid_sum) { spa_load_failed(spa, "uberblock guid sum doesn't match MOS " "guid sum (%llu != %llu)", (u_longlong_t)spa->spa_uberblock.ub_guid_sum, (u_longlong_t)rvd->vdev_guid_sum); return (spa_vdev_err(rvd, VDEV_AUX_BAD_GUID_SUM, ENXIO)); } return (0); } static int spa_ld_open_indirect_vdev_metadata(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; /* * Everything that we read before spa_remove_init() must be stored * on concreted vdevs. Therefore we do this as early as possible. */ error = spa_remove_init(spa); if (error != 0) { spa_load_failed(spa, "spa_remove_init failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } /* * Retrieve information needed to condense indirect vdev mappings. */ error = spa_condense_init(spa); if (error != 0) { spa_load_failed(spa, "spa_condense_init failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error)); } return (0); } static int spa_ld_check_features(spa_t *spa, boolean_t *missing_feat_writep) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; if (spa_version(spa) >= SPA_VERSION_FEATURES) { boolean_t missing_feat_read = B_FALSE; nvlist_t *unsup_feat, *enabled_feat; if (spa_dir_prop(spa, DMU_POOL_FEATURES_FOR_READ, &spa->spa_feat_for_read_obj, B_TRUE) != 0) { return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } if (spa_dir_prop(spa, DMU_POOL_FEATURES_FOR_WRITE, &spa->spa_feat_for_write_obj, B_TRUE) != 0) { return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } if (spa_dir_prop(spa, DMU_POOL_FEATURE_DESCRIPTIONS, &spa->spa_feat_desc_obj, B_TRUE) != 0) { return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } enabled_feat = fnvlist_alloc(); unsup_feat = fnvlist_alloc(); if (!spa_features_check(spa, B_FALSE, unsup_feat, enabled_feat)) missing_feat_read = B_TRUE; if (spa_writeable(spa) || spa->spa_load_state == SPA_LOAD_TRYIMPORT) { if (!spa_features_check(spa, B_TRUE, unsup_feat, enabled_feat)) { *missing_feat_writep = B_TRUE; } } fnvlist_add_nvlist(spa->spa_load_info, ZPOOL_CONFIG_ENABLED_FEAT, enabled_feat); if (!nvlist_empty(unsup_feat)) { fnvlist_add_nvlist(spa->spa_load_info, ZPOOL_CONFIG_UNSUP_FEAT, unsup_feat); } fnvlist_free(enabled_feat); fnvlist_free(unsup_feat); if (!missing_feat_read) { fnvlist_add_boolean(spa->spa_load_info, ZPOOL_CONFIG_CAN_RDONLY); } /* * If the state is SPA_LOAD_TRYIMPORT, our objective is * twofold: to determine whether the pool is available for * import in read-write mode and (if it is not) whether the * pool is available for import in read-only mode. If the pool * is available for import in read-write mode, it is displayed * as available in userland; if it is not available for import * in read-only mode, it is displayed as unavailable in * userland. If the pool is available for import in read-only * mode but not read-write mode, it is displayed as unavailable * in userland with a special note that the pool is actually * available for open in read-only mode. * * As a result, if the state is SPA_LOAD_TRYIMPORT and we are * missing a feature for write, we must first determine whether * the pool can be opened read-only before returning to * userland in order to know whether to display the * abovementioned note. */ if (missing_feat_read || (*missing_feat_writep && spa_writeable(spa))) { spa_load_failed(spa, "pool uses unsupported features"); return (spa_vdev_err(rvd, VDEV_AUX_UNSUP_FEAT, ENOTSUP)); } /* * Load refcounts for ZFS features from disk into an in-memory * cache during SPA initialization. */ for (spa_feature_t i = 0; i < SPA_FEATURES; i++) { uint64_t refcount; error = feature_get_refcount_from_disk(spa, &spa_feature_table[i], &refcount); if (error == 0) { spa->spa_feat_refcount_cache[i] = refcount; } else if (error == ENOTSUP) { spa->spa_feat_refcount_cache[i] = SPA_FEATURE_DISABLED; } else { spa_load_failed(spa, "error getting refcount " "for feature %s [error=%d]", spa_feature_table[i].fi_guid, error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } } } if (spa_feature_is_active(spa, SPA_FEATURE_ENABLED_TXG)) { if (spa_dir_prop(spa, DMU_POOL_FEATURE_ENABLED_TXG, &spa->spa_feat_enabled_txg_obj, B_TRUE) != 0) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } /* * Encryption was added before bookmark_v2, even though bookmark_v2 * is now a dependency. If this pool has encryption enabled without * bookmark_v2, trigger an errata message. */ if (spa_feature_is_enabled(spa, SPA_FEATURE_ENCRYPTION) && !spa_feature_is_enabled(spa, SPA_FEATURE_BOOKMARK_V2)) { spa->spa_errata = ZPOOL_ERRATA_ZOL_8308_ENCRYPTION; } return (0); } static int spa_ld_load_special_directories(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; spa->spa_is_initializing = B_TRUE; error = dsl_pool_open(spa->spa_dsl_pool); spa->spa_is_initializing = B_FALSE; if (error != 0) { spa_load_failed(spa, "dsl_pool_open failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } return (0); } static int spa_ld_get_props(spa_t *spa) { int error = 0; uint64_t obj; vdev_t *rvd = spa->spa_root_vdev; /* Grab the checksum salt from the MOS. */ error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CHECKSUM_SALT, 1, sizeof (spa->spa_cksum_salt.zcs_bytes), spa->spa_cksum_salt.zcs_bytes); if (error == ENOENT) { /* Generate a new salt for subsequent use */ (void) random_get_pseudo_bytes(spa->spa_cksum_salt.zcs_bytes, sizeof (spa->spa_cksum_salt.zcs_bytes)); } else if (error != 0) { spa_load_failed(spa, "unable to retrieve checksum salt from " "MOS [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } if (spa_dir_prop(spa, DMU_POOL_SYNC_BPOBJ, &obj, B_TRUE) != 0) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); error = bpobj_open(&spa->spa_deferred_bpobj, spa->spa_meta_objset, obj); if (error != 0) { spa_load_failed(spa, "error opening deferred-frees bpobj " "[error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } /* * Load the bit that tells us to use the new accounting function * (raid-z deflation). If we have an older pool, this will not * be present. */ error = spa_dir_prop(spa, DMU_POOL_DEFLATE, &spa->spa_deflate, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); error = spa_dir_prop(spa, DMU_POOL_CREATION_VERSION, &spa->spa_creation_version, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); /* * Load the persistent error log. If we have an older pool, this will * not be present. */ error = spa_dir_prop(spa, DMU_POOL_ERRLOG_LAST, &spa->spa_errlog_last, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); error = spa_dir_prop(spa, DMU_POOL_ERRLOG_SCRUB, &spa->spa_errlog_scrub, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); /* * Load the livelist deletion field. If a livelist is queued for * deletion, indicate that in the spa */ error = spa_dir_prop(spa, DMU_POOL_DELETED_CLONES, &spa->spa_livelists_to_delete, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); /* * Load the history object. If we have an older pool, this * will not be present. */ error = spa_dir_prop(spa, DMU_POOL_HISTORY, &spa->spa_history, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); /* * Load the per-vdev ZAP map. If we have an older pool, this will not * be present; in this case, defer its creation to a later time to * avoid dirtying the MOS this early / out of sync context. See * spa_sync_config_object. */ /* The sentinel is only available in the MOS config. */ nvlist_t *mos_config; if (load_nvlist(spa, spa->spa_config_object, &mos_config) != 0) { spa_load_failed(spa, "unable to retrieve MOS config"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } error = spa_dir_prop(spa, DMU_POOL_VDEV_ZAP_MAP, &spa->spa_all_vdev_zaps, B_FALSE); if (error == ENOENT) { VERIFY(!nvlist_exists(mos_config, ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS)); spa->spa_avz_action = AVZ_ACTION_INITIALIZE; ASSERT0(vdev_count_verify_zaps(spa->spa_root_vdev)); } else if (error != 0) { nvlist_free(mos_config); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } else if (!nvlist_exists(mos_config, ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS)) { /* * An older version of ZFS overwrote the sentinel value, so * we have orphaned per-vdev ZAPs in the MOS. Defer their * destruction to later; see spa_sync_config_object. */ spa->spa_avz_action = AVZ_ACTION_DESTROY; /* * We're assuming that no vdevs have had their ZAPs created * before this. Better be sure of it. */ ASSERT0(vdev_count_verify_zaps(spa->spa_root_vdev)); } nvlist_free(mos_config); spa->spa_delegation = zpool_prop_default_numeric(ZPOOL_PROP_DELEGATION); error = spa_dir_prop(spa, DMU_POOL_PROPS, &spa->spa_pool_props_object, B_FALSE); if (error && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); if (error == 0) { uint64_t autoreplace = 0; spa_prop_find(spa, ZPOOL_PROP_BOOTFS, &spa->spa_bootfs); spa_prop_find(spa, ZPOOL_PROP_AUTOREPLACE, &autoreplace); spa_prop_find(spa, ZPOOL_PROP_DELEGATION, &spa->spa_delegation); spa_prop_find(spa, ZPOOL_PROP_FAILUREMODE, &spa->spa_failmode); spa_prop_find(spa, ZPOOL_PROP_AUTOEXPAND, &spa->spa_autoexpand); + spa_prop_find(spa, ZPOOL_PROP_DEDUP_TABLE_QUOTA, + &spa->spa_dedup_table_quota); spa_prop_find(spa, ZPOOL_PROP_MULTIHOST, &spa->spa_multihost); spa_prop_find(spa, ZPOOL_PROP_AUTOTRIM, &spa->spa_autotrim); spa->spa_autoreplace = (autoreplace != 0); } /* * If we are importing a pool with missing top-level vdevs, * we enforce that the pool doesn't panic or get suspended on * error since the likelihood of missing data is extremely high. */ if (spa->spa_missing_tvds > 0 && spa->spa_failmode != ZIO_FAILURE_MODE_CONTINUE && spa->spa_load_state != SPA_LOAD_TRYIMPORT) { spa_load_note(spa, "forcing failmode to 'continue' " "as some top level vdevs are missing"); spa->spa_failmode = ZIO_FAILURE_MODE_CONTINUE; } return (0); } static int spa_ld_open_aux_vdevs(spa_t *spa, spa_import_type_t type) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; /* * If we're assembling the pool from the split-off vdevs of * an existing pool, we don't want to attach the spares & cache * devices. */ /* * Load any hot spares for this pool. */ error = spa_dir_prop(spa, DMU_POOL_SPARES, &spa->spa_spares.sav_object, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); if (error == 0 && type != SPA_IMPORT_ASSEMBLE) { ASSERT(spa_version(spa) >= SPA_VERSION_SPARES); if (load_nvlist(spa, spa->spa_spares.sav_object, &spa->spa_spares.sav_config) != 0) { spa_load_failed(spa, "error loading spares nvlist"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_spares(spa); spa_config_exit(spa, SCL_ALL, FTAG); } else if (error == 0) { spa->spa_spares.sav_sync = B_TRUE; } /* * Load any level 2 ARC devices for this pool. */ error = spa_dir_prop(spa, DMU_POOL_L2CACHE, &spa->spa_l2cache.sav_object, B_FALSE); if (error != 0 && error != ENOENT) return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); if (error == 0 && type != SPA_IMPORT_ASSEMBLE) { ASSERT(spa_version(spa) >= SPA_VERSION_L2CACHE); if (load_nvlist(spa, spa->spa_l2cache.sav_object, &spa->spa_l2cache.sav_config) != 0) { spa_load_failed(spa, "error loading l2cache nvlist"); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_l2cache(spa); spa_config_exit(spa, SCL_ALL, FTAG); } else if (error == 0) { spa->spa_l2cache.sav_sync = B_TRUE; } return (0); } static int spa_ld_load_vdev_metadata(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; /* * If the 'multihost' property is set, then never allow a pool to * be imported when the system hostid is zero. The exception to * this rule is zdb which is always allowed to access pools. */ if (spa_multihost(spa) && spa_get_hostid(spa) == 0 && (spa->spa_import_flags & ZFS_IMPORT_SKIP_MMP) == 0) { fnvlist_add_uint64(spa->spa_load_info, ZPOOL_CONFIG_MMP_STATE, MMP_STATE_NO_HOSTID); return (spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO)); } /* * If the 'autoreplace' property is set, then post a resource notifying * the ZFS DE that it should not issue any faults for unopenable * devices. We also iterate over the vdevs, and post a sysevent for any * unopenable vdevs so that the normal autoreplace handler can take * over. */ if (spa->spa_autoreplace && spa->spa_load_state != SPA_LOAD_TRYIMPORT) { spa_check_removed(spa->spa_root_vdev); /* * For the import case, this is done in spa_import(), because * at this point we're using the spare definitions from * the MOS config, not necessarily from the userland config. */ if (spa->spa_load_state != SPA_LOAD_IMPORT) { spa_aux_check_removed(&spa->spa_spares); spa_aux_check_removed(&spa->spa_l2cache); } } /* * Load the vdev metadata such as metaslabs, DTLs, spacemap object, etc. */ error = vdev_load(rvd); if (error != 0) { spa_load_failed(spa, "vdev_load failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error)); } error = spa_ld_log_spacemaps(spa); if (error != 0) { spa_load_failed(spa, "spa_ld_log_spacemaps failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error)); } /* * Propagate the leaf DTLs we just loaded all the way up the vdev tree. */ spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); vdev_dtl_reassess(rvd, 0, 0, B_FALSE, B_FALSE); spa_config_exit(spa, SCL_ALL, FTAG); return (0); } static int spa_ld_load_dedup_tables(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; error = ddt_load(spa); if (error != 0) { spa_load_failed(spa, "ddt_load failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } return (0); } static int spa_ld_load_brt(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; error = brt_load(spa); if (error != 0) { spa_load_failed(spa, "brt_load failed [error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO)); } return (0); } static int spa_ld_verify_logs(spa_t *spa, spa_import_type_t type, const char **ereport) { vdev_t *rvd = spa->spa_root_vdev; if (type != SPA_IMPORT_ASSEMBLE && spa_writeable(spa)) { boolean_t missing = spa_check_logs(spa); if (missing) { if (spa->spa_missing_tvds != 0) { spa_load_note(spa, "spa_check_logs failed " "so dropping the logs"); } else { *ereport = FM_EREPORT_ZFS_LOG_REPLAY; spa_load_failed(spa, "spa_check_logs failed"); return (spa_vdev_err(rvd, VDEV_AUX_BAD_LOG, ENXIO)); } } } return (0); } static int spa_ld_verify_pool_data(spa_t *spa) { int error = 0; vdev_t *rvd = spa->spa_root_vdev; /* * We've successfully opened the pool, verify that we're ready * to start pushing transactions. */ if (spa->spa_load_state != SPA_LOAD_TRYIMPORT) { error = spa_load_verify(spa); if (error != 0) { spa_load_failed(spa, "spa_load_verify failed " "[error=%d]", error); return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error)); } } return (0); } static void spa_ld_claim_log_blocks(spa_t *spa) { dmu_tx_t *tx; dsl_pool_t *dp = spa_get_dsl(spa); /* * Claim log blocks that haven't been committed yet. * This must all happen in a single txg. * Note: spa_claim_max_txg is updated by spa_claim_notify(), * invoked from zil_claim_log_block()'s i/o done callback. * Price of rollback is that we abandon the log. */ spa->spa_claiming = B_TRUE; tx = dmu_tx_create_assigned(dp, spa_first_txg(spa)); (void) dmu_objset_find_dp(dp, dp->dp_root_dir_obj, zil_claim, tx, DS_FIND_CHILDREN); dmu_tx_commit(tx); spa->spa_claiming = B_FALSE; spa_set_log_state(spa, SPA_LOG_GOOD); } static void spa_ld_check_for_config_update(spa_t *spa, uint64_t config_cache_txg, boolean_t update_config_cache) { vdev_t *rvd = spa->spa_root_vdev; int need_update = B_FALSE; /* * If the config cache is stale, or we have uninitialized * metaslabs (see spa_vdev_add()), then update the config. * * If this is a verbatim import, trust the current * in-core spa_config and update the disk labels. */ if (update_config_cache || config_cache_txg != spa->spa_config_txg || spa->spa_load_state == SPA_LOAD_IMPORT || spa->spa_load_state == SPA_LOAD_RECOVER || (spa->spa_import_flags & ZFS_IMPORT_VERBATIM)) need_update = B_TRUE; for (int c = 0; c < rvd->vdev_children; c++) if (rvd->vdev_child[c]->vdev_ms_array == 0) need_update = B_TRUE; /* * Update the config cache asynchronously in case we're the * root pool, in which case the config cache isn't writable yet. */ if (need_update) spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE); } static void spa_ld_prepare_for_reload(spa_t *spa) { spa_mode_t mode = spa->spa_mode; int async_suspended = spa->spa_async_suspended; spa_unload(spa); spa_deactivate(spa); spa_activate(spa, mode); /* * We save the value of spa_async_suspended as it gets reset to 0 by * spa_unload(). We want to restore it back to the original value before * returning as we might be calling spa_async_resume() later. */ spa->spa_async_suspended = async_suspended; } static int spa_ld_read_checkpoint_txg(spa_t *spa) { uberblock_t checkpoint; int error = 0; ASSERT0(spa->spa_checkpoint_txg); ASSERT(MUTEX_HELD(&spa_namespace_lock) || spa->spa_load_thread == curthread); error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_ZPOOL_CHECKPOINT, sizeof (uint64_t), sizeof (uberblock_t) / sizeof (uint64_t), &checkpoint); if (error == ENOENT) return (0); if (error != 0) return (error); ASSERT3U(checkpoint.ub_txg, !=, 0); ASSERT3U(checkpoint.ub_checkpoint_txg, !=, 0); ASSERT3U(checkpoint.ub_timestamp, !=, 0); spa->spa_checkpoint_txg = checkpoint.ub_txg; spa->spa_checkpoint_info.sci_timestamp = checkpoint.ub_timestamp; return (0); } static int spa_ld_mos_init(spa_t *spa, spa_import_type_t type) { int error = 0; ASSERT(MUTEX_HELD(&spa_namespace_lock)); ASSERT(spa->spa_config_source != SPA_CONFIG_SRC_NONE); /* * Never trust the config that is provided unless we are assembling * a pool following a split. * This means don't trust blkptrs and the vdev tree in general. This * also effectively puts the spa in read-only mode since * spa_writeable() checks for spa_trust_config to be true. * We will later load a trusted config from the MOS. */ if (type != SPA_IMPORT_ASSEMBLE) spa->spa_trust_config = B_FALSE; /* * Parse the config provided to create a vdev tree. */ error = spa_ld_parse_config(spa, type); if (error != 0) return (error); spa_import_progress_add(spa); /* * Now that we have the vdev tree, try to open each vdev. This involves * opening the underlying physical device, retrieving its geometry and * probing the vdev with a dummy I/O. The state of each vdev will be set * based on the success of those operations. After this we'll be ready * to read from the vdevs. */ error = spa_ld_open_vdevs(spa); if (error != 0) return (error); /* * Read the label of each vdev and make sure that the GUIDs stored * there match the GUIDs in the config provided. * If we're assembling a new pool that's been split off from an * existing pool, the labels haven't yet been updated so we skip * validation for now. */ if (type != SPA_IMPORT_ASSEMBLE) { error = spa_ld_validate_vdevs(spa); if (error != 0) return (error); } /* * Read all vdev labels to find the best uberblock (i.e. latest, * unless spa_load_max_txg is set) and store it in spa_uberblock. We * get the list of features required to read blkptrs in the MOS from * the vdev label with the best uberblock and verify that our version * of zfs supports them all. */ error = spa_ld_select_uberblock(spa, type); if (error != 0) return (error); /* * Pass that uberblock to the dsl_pool layer which will open the root * blkptr. This blkptr points to the latest version of the MOS and will * allow us to read its contents. */ error = spa_ld_open_rootbp(spa); if (error != 0) return (error); return (0); } static int spa_ld_checkpoint_rewind(spa_t *spa) { uberblock_t checkpoint; int error = 0; ASSERT(MUTEX_HELD(&spa_namespace_lock)); ASSERT(spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT); error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_ZPOOL_CHECKPOINT, sizeof (uint64_t), sizeof (uberblock_t) / sizeof (uint64_t), &checkpoint); if (error != 0) { spa_load_failed(spa, "unable to retrieve checkpointed " "uberblock from the MOS config [error=%d]", error); if (error == ENOENT) error = ZFS_ERR_NO_CHECKPOINT; return (error); } ASSERT3U(checkpoint.ub_txg, <, spa->spa_uberblock.ub_txg); ASSERT3U(checkpoint.ub_txg, ==, checkpoint.ub_checkpoint_txg); /* * We need to update the txg and timestamp of the checkpointed * uberblock to be higher than the latest one. This ensures that * the checkpointed uberblock is selected if we were to close and * reopen the pool right after we've written it in the vdev labels. * (also see block comment in vdev_uberblock_compare) */ checkpoint.ub_txg = spa->spa_uberblock.ub_txg + 1; checkpoint.ub_timestamp = gethrestime_sec(); /* * Set current uberblock to be the checkpointed uberblock. */ spa->spa_uberblock = checkpoint; /* * If we are doing a normal rewind, then the pool is open for * writing and we sync the "updated" checkpointed uberblock to * disk. Once this is done, we've basically rewound the whole * pool and there is no way back. * * There are cases when we don't want to attempt and sync the * checkpointed uberblock to disk because we are opening a * pool as read-only. Specifically, verifying the checkpointed * state with zdb, and importing the checkpointed state to get * a "preview" of its content. */ if (spa_writeable(spa)) { vdev_t *rvd = spa->spa_root_vdev; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); vdev_t *svd[SPA_SYNC_MIN_VDEVS] = { NULL }; int svdcount = 0; int children = rvd->vdev_children; int c0 = random_in_range(children); for (int c = 0; c < children; c++) { vdev_t *vd = rvd->vdev_child[(c0 + c) % children]; /* Stop when revisiting the first vdev */ if (c > 0 && svd[0] == vd) break; if (vd->vdev_ms_array == 0 || vd->vdev_islog || !vdev_is_concrete(vd)) continue; svd[svdcount++] = vd; if (svdcount == SPA_SYNC_MIN_VDEVS) break; } error = vdev_config_sync(svd, svdcount, spa->spa_first_txg); if (error == 0) spa->spa_last_synced_guid = rvd->vdev_guid; spa_config_exit(spa, SCL_ALL, FTAG); if (error != 0) { spa_load_failed(spa, "failed to write checkpointed " "uberblock to the vdev labels [error=%d]", error); return (error); } } return (0); } static int spa_ld_mos_with_trusted_config(spa_t *spa, spa_import_type_t type, boolean_t *update_config_cache) { int error; /* * Parse the config for pool, open and validate vdevs, * select an uberblock, and use that uberblock to open * the MOS. */ error = spa_ld_mos_init(spa, type); if (error != 0) return (error); /* * Retrieve the trusted config stored in the MOS and use it to create * a new, exact version of the vdev tree, then reopen all vdevs. */ error = spa_ld_trusted_config(spa, type, B_FALSE); if (error == EAGAIN) { if (update_config_cache != NULL) *update_config_cache = B_TRUE; /* * Redo the loading process with the trusted config if it is * too different from the untrusted config. */ spa_ld_prepare_for_reload(spa); spa_load_note(spa, "RELOADING"); error = spa_ld_mos_init(spa, type); if (error != 0) return (error); error = spa_ld_trusted_config(spa, type, B_TRUE); if (error != 0) return (error); } else if (error != 0) { return (error); } return (0); } /* * Load an existing storage pool, using the config provided. This config * describes which vdevs are part of the pool and is later validated against * partial configs present in each vdev's label and an entire copy of the * config stored in the MOS. */ static int spa_load_impl(spa_t *spa, spa_import_type_t type, const char **ereport) { int error = 0; boolean_t missing_feat_write = B_FALSE; boolean_t checkpoint_rewind = (spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT); boolean_t update_config_cache = B_FALSE; hrtime_t load_start = gethrtime(); ASSERT(MUTEX_HELD(&spa_namespace_lock)); ASSERT(spa->spa_config_source != SPA_CONFIG_SRC_NONE); spa_load_note(spa, "LOADING"); error = spa_ld_mos_with_trusted_config(spa, type, &update_config_cache); if (error != 0) return (error); /* * If we are rewinding to the checkpoint then we need to repeat * everything we've done so far in this function but this time * selecting the checkpointed uberblock and using that to open * the MOS. */ if (checkpoint_rewind) { /* * If we are rewinding to the checkpoint update config cache * anyway. */ update_config_cache = B_TRUE; /* * Extract the checkpointed uberblock from the current MOS * and use this as the pool's uberblock from now on. If the * pool is imported as writeable we also write the checkpoint * uberblock to the labels, making the rewind permanent. */ error = spa_ld_checkpoint_rewind(spa); if (error != 0) return (error); /* * Redo the loading process again with the * checkpointed uberblock. */ spa_ld_prepare_for_reload(spa); spa_load_note(spa, "LOADING checkpointed uberblock"); error = spa_ld_mos_with_trusted_config(spa, type, NULL); if (error != 0) return (error); } /* * Drop the namespace lock for the rest of the function. */ spa->spa_load_thread = curthread; mutex_exit(&spa_namespace_lock); /* * Retrieve the checkpoint txg if the pool has a checkpoint. */ spa_import_progress_set_notes(spa, "Loading checkpoint txg"); error = spa_ld_read_checkpoint_txg(spa); if (error != 0) goto fail; /* * Retrieve the mapping of indirect vdevs. Those vdevs were removed * from the pool and their contents were re-mapped to other vdevs. Note * that everything that we read before this step must have been * rewritten on concrete vdevs after the last device removal was * initiated. Otherwise we could be reading from indirect vdevs before * we have loaded their mappings. */ spa_import_progress_set_notes(spa, "Loading indirect vdev metadata"); error = spa_ld_open_indirect_vdev_metadata(spa); if (error != 0) goto fail; /* * Retrieve the full list of active features from the MOS and check if * they are all supported. */ spa_import_progress_set_notes(spa, "Checking feature flags"); error = spa_ld_check_features(spa, &missing_feat_write); if (error != 0) goto fail; /* * Load several special directories from the MOS needed by the dsl_pool * layer. */ spa_import_progress_set_notes(spa, "Loading special MOS directories"); error = spa_ld_load_special_directories(spa); if (error != 0) goto fail; /* * Retrieve pool properties from the MOS. */ spa_import_progress_set_notes(spa, "Loading properties"); error = spa_ld_get_props(spa); if (error != 0) goto fail; /* * Retrieve the list of auxiliary devices - cache devices and spares - * and open them. */ spa_import_progress_set_notes(spa, "Loading AUX vdevs"); error = spa_ld_open_aux_vdevs(spa, type); if (error != 0) goto fail; /* * Load the metadata for all vdevs. Also check if unopenable devices * should be autoreplaced. */ spa_import_progress_set_notes(spa, "Loading vdev metadata"); error = spa_ld_load_vdev_metadata(spa); if (error != 0) goto fail; spa_import_progress_set_notes(spa, "Loading dedup tables"); error = spa_ld_load_dedup_tables(spa); if (error != 0) goto fail; spa_import_progress_set_notes(spa, "Loading BRT"); error = spa_ld_load_brt(spa); if (error != 0) goto fail; /* * Verify the logs now to make sure we don't have any unexpected errors * when we claim log blocks later. */ spa_import_progress_set_notes(spa, "Verifying Log Devices"); error = spa_ld_verify_logs(spa, type, ereport); if (error != 0) goto fail; if (missing_feat_write) { ASSERT(spa->spa_load_state == SPA_LOAD_TRYIMPORT); /* * At this point, we know that we can open the pool in * read-only mode but not read-write mode. We now have enough * information and can return to userland. */ error = spa_vdev_err(spa->spa_root_vdev, VDEV_AUX_UNSUP_FEAT, ENOTSUP); goto fail; } /* * Traverse the last txgs to make sure the pool was left off in a safe * state. When performing an extreme rewind, we verify the whole pool, * which can take a very long time. */ spa_import_progress_set_notes(spa, "Verifying pool data"); error = spa_ld_verify_pool_data(spa); if (error != 0) goto fail; /* * Calculate the deflated space for the pool. This must be done before * we write anything to the pool because we'd need to update the space * accounting using the deflated sizes. */ spa_import_progress_set_notes(spa, "Calculating deflated space"); spa_update_dspace(spa); /* * We have now retrieved all the information we needed to open the * pool. If we are importing the pool in read-write mode, a few * additional steps must be performed to finish the import. */ spa_import_progress_set_notes(spa, "Starting import"); if (spa_writeable(spa) && (spa->spa_load_state == SPA_LOAD_RECOVER || spa->spa_load_max_txg == UINT64_MAX)) { uint64_t config_cache_txg = spa->spa_config_txg; ASSERT(spa->spa_load_state != SPA_LOAD_TRYIMPORT); /* * Before we do any zio_write's, complete the raidz expansion * scratch space copying, if necessary. */ if (RRSS_GET_STATE(&spa->spa_uberblock) == RRSS_SCRATCH_VALID) vdev_raidz_reflow_copy_scratch(spa); /* * In case of a checkpoint rewind, log the original txg * of the checkpointed uberblock. */ if (checkpoint_rewind) { spa_history_log_internal(spa, "checkpoint rewind", NULL, "rewound state to txg=%llu", (u_longlong_t)spa->spa_uberblock.ub_checkpoint_txg); } spa_import_progress_set_notes(spa, "Claiming ZIL blocks"); /* * Traverse the ZIL and claim all blocks. */ spa_ld_claim_log_blocks(spa); /* * Kick-off the syncing thread. */ spa->spa_sync_on = B_TRUE; txg_sync_start(spa->spa_dsl_pool); mmp_thread_start(spa); /* * Wait for all claims to sync. We sync up to the highest * claimed log block birth time so that claimed log blocks * don't appear to be from the future. spa_claim_max_txg * will have been set for us by ZIL traversal operations * performed above. */ spa_import_progress_set_notes(spa, "Syncing ZIL claims"); txg_wait_synced(spa->spa_dsl_pool, spa->spa_claim_max_txg); /* * Check if we need to request an update of the config. On the * next sync, we would update the config stored in vdev labels * and the cachefile (by default /etc/zfs/zpool.cache). */ spa_import_progress_set_notes(spa, "Updating configs"); spa_ld_check_for_config_update(spa, config_cache_txg, update_config_cache); /* * Check if a rebuild was in progress and if so resume it. * Then check all DTLs to see if anything needs resilvering. * The resilver will be deferred if a rebuild was started. */ spa_import_progress_set_notes(spa, "Starting resilvers"); if (vdev_rebuild_active(spa->spa_root_vdev)) { vdev_rebuild_restart(spa); } else if (!dsl_scan_resilvering(spa->spa_dsl_pool) && vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL)) { spa_async_request(spa, SPA_ASYNC_RESILVER); } /* * Log the fact that we booted up (so that we can detect if * we rebooted in the middle of an operation). */ spa_history_log_version(spa, "open", NULL); spa_import_progress_set_notes(spa, "Restarting device removals"); spa_restart_removal(spa); spa_spawn_aux_threads(spa); /* * Delete any inconsistent datasets. * * Note: * Since we may be issuing deletes for clones here, * we make sure to do so after we've spawned all the * auxiliary threads above (from which the livelist * deletion zthr is part of). */ spa_import_progress_set_notes(spa, "Cleaning up inconsistent objsets"); (void) dmu_objset_find(spa_name(spa), dsl_destroy_inconsistent, NULL, DS_FIND_CHILDREN); /* * Clean up any stale temporary dataset userrefs. */ spa_import_progress_set_notes(spa, "Cleaning up temporary userrefs"); dsl_pool_clean_tmp_userrefs(spa->spa_dsl_pool); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); spa_import_progress_set_notes(spa, "Restarting initialize"); vdev_initialize_restart(spa->spa_root_vdev); spa_import_progress_set_notes(spa, "Restarting TRIM"); vdev_trim_restart(spa->spa_root_vdev); vdev_autotrim_restart(spa); spa_config_exit(spa, SCL_CONFIG, FTAG); spa_import_progress_set_notes(spa, "Finished importing"); } zio_handle_import_delay(spa, gethrtime() - load_start); spa_import_progress_remove(spa_guid(spa)); spa_async_request(spa, SPA_ASYNC_L2CACHE_REBUILD); spa_load_note(spa, "LOADED"); fail: mutex_enter(&spa_namespace_lock); spa->spa_load_thread = NULL; cv_broadcast(&spa_namespace_cv); return (error); } static int spa_load_retry(spa_t *spa, spa_load_state_t state) { spa_mode_t mode = spa->spa_mode; spa_unload(spa); spa_deactivate(spa); spa->spa_load_max_txg = spa->spa_uberblock.ub_txg - 1; spa_activate(spa, mode); spa_async_suspend(spa); spa_load_note(spa, "spa_load_retry: rewind, max txg: %llu", (u_longlong_t)spa->spa_load_max_txg); return (spa_load(spa, state, SPA_IMPORT_EXISTING)); } /* * If spa_load() fails this function will try loading prior txg's. If * 'state' is SPA_LOAD_RECOVER and one of these loads succeeds the pool * will be rewound to that txg. If 'state' is not SPA_LOAD_RECOVER this * function will not rewind the pool and will return the same error as * spa_load(). */ static int spa_load_best(spa_t *spa, spa_load_state_t state, uint64_t max_request, int rewind_flags) { nvlist_t *loadinfo = NULL; nvlist_t *config = NULL; int load_error, rewind_error; uint64_t safe_rewind_txg; uint64_t min_txg; if (spa->spa_load_txg && state == SPA_LOAD_RECOVER) { spa->spa_load_max_txg = spa->spa_load_txg; spa_set_log_state(spa, SPA_LOG_CLEAR); } else { spa->spa_load_max_txg = max_request; if (max_request != UINT64_MAX) spa->spa_extreme_rewind = B_TRUE; } load_error = rewind_error = spa_load(spa, state, SPA_IMPORT_EXISTING); if (load_error == 0) return (0); if (load_error == ZFS_ERR_NO_CHECKPOINT) { /* * When attempting checkpoint-rewind on a pool with no * checkpoint, we should not attempt to load uberblocks * from previous txgs when spa_load fails. */ ASSERT(spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT); spa_import_progress_remove(spa_guid(spa)); return (load_error); } if (spa->spa_root_vdev != NULL) config = spa_config_generate(spa, NULL, -1ULL, B_TRUE); spa->spa_last_ubsync_txg = spa->spa_uberblock.ub_txg; spa->spa_last_ubsync_txg_ts = spa->spa_uberblock.ub_timestamp; if (rewind_flags & ZPOOL_NEVER_REWIND) { nvlist_free(config); spa_import_progress_remove(spa_guid(spa)); return (load_error); } if (state == SPA_LOAD_RECOVER) { /* Price of rolling back is discarding txgs, including log */ spa_set_log_state(spa, SPA_LOG_CLEAR); } else { /* * If we aren't rolling back save the load info from our first * import attempt so that we can restore it after attempting * to rewind. */ loadinfo = spa->spa_load_info; spa->spa_load_info = fnvlist_alloc(); } spa->spa_load_max_txg = spa->spa_last_ubsync_txg; safe_rewind_txg = spa->spa_last_ubsync_txg - TXG_DEFER_SIZE; min_txg = (rewind_flags & ZPOOL_EXTREME_REWIND) ? TXG_INITIAL : safe_rewind_txg; /* * Continue as long as we're finding errors, we're still within * the acceptable rewind range, and we're still finding uberblocks */ while (rewind_error && spa->spa_uberblock.ub_txg >= min_txg && spa->spa_uberblock.ub_txg <= spa->spa_load_max_txg) { if (spa->spa_load_max_txg < safe_rewind_txg) spa->spa_extreme_rewind = B_TRUE; rewind_error = spa_load_retry(spa, state); } spa->spa_extreme_rewind = B_FALSE; spa->spa_load_max_txg = UINT64_MAX; if (config && (rewind_error || state != SPA_LOAD_RECOVER)) spa_config_set(spa, config); else nvlist_free(config); if (state == SPA_LOAD_RECOVER) { ASSERT3P(loadinfo, ==, NULL); spa_import_progress_remove(spa_guid(spa)); return (rewind_error); } else { /* Store the rewind info as part of the initial load info */ fnvlist_add_nvlist(loadinfo, ZPOOL_CONFIG_REWIND_INFO, spa->spa_load_info); /* Restore the initial load info */ fnvlist_free(spa->spa_load_info); spa->spa_load_info = loadinfo; spa_import_progress_remove(spa_guid(spa)); return (load_error); } } /* * Pool Open/Import * * The import case is identical to an open except that the configuration is sent * down from userland, instead of grabbed from the configuration cache. For the * case of an open, the pool configuration will exist in the * POOL_STATE_UNINITIALIZED state. * * The stats information (gen/count/ustats) is used to gather vdev statistics at * the same time open the pool, without having to keep around the spa_t in some * ambiguous state. */ static int spa_open_common(const char *pool, spa_t **spapp, const void *tag, nvlist_t *nvpolicy, nvlist_t **config) { spa_t *spa; spa_load_state_t state = SPA_LOAD_OPEN; int error; int locked = B_FALSE; int firstopen = B_FALSE; *spapp = NULL; /* * As disgusting as this is, we need to support recursive calls to this * function because dsl_dir_open() is called during spa_load(), and ends * up calling spa_open() again. The real fix is to figure out how to * avoid dsl_dir_open() calling this in the first place. */ if (MUTEX_NOT_HELD(&spa_namespace_lock)) { mutex_enter(&spa_namespace_lock); locked = B_TRUE; } if ((spa = spa_lookup(pool)) == NULL) { if (locked) mutex_exit(&spa_namespace_lock); return (SET_ERROR(ENOENT)); } if (spa->spa_state == POOL_STATE_UNINITIALIZED) { zpool_load_policy_t policy; firstopen = B_TRUE; zpool_get_load_policy(nvpolicy ? nvpolicy : spa->spa_config, &policy); if (policy.zlp_rewind & ZPOOL_DO_REWIND) state = SPA_LOAD_RECOVER; spa_activate(spa, spa_mode_global); if (state != SPA_LOAD_RECOVER) spa->spa_last_ubsync_txg = spa->spa_load_txg = 0; spa->spa_config_source = SPA_CONFIG_SRC_CACHEFILE; zfs_dbgmsg("spa_open_common: opening %s", pool); error = spa_load_best(spa, state, policy.zlp_txg, policy.zlp_rewind); if (error == EBADF) { /* * If vdev_validate() returns failure (indicated by * EBADF), it indicates that one of the vdevs indicates * that the pool has been exported or destroyed. If * this is the case, the config cache is out of sync and * we should remove the pool from the namespace. */ spa_unload(spa); spa_deactivate(spa); spa_write_cachefile(spa, B_TRUE, B_TRUE, B_FALSE); spa_remove(spa); if (locked) mutex_exit(&spa_namespace_lock); return (SET_ERROR(ENOENT)); } if (error) { /* * We can't open the pool, but we still have useful * information: the state of each vdev after the * attempted vdev_open(). Return this to the user. */ if (config != NULL && spa->spa_config) { *config = fnvlist_dup(spa->spa_config); fnvlist_add_nvlist(*config, ZPOOL_CONFIG_LOAD_INFO, spa->spa_load_info); } spa_unload(spa); spa_deactivate(spa); spa->spa_last_open_failed = error; if (locked) mutex_exit(&spa_namespace_lock); *spapp = NULL; return (error); } } spa_open_ref(spa, tag); if (config != NULL) *config = spa_config_generate(spa, NULL, -1ULL, B_TRUE); /* * If we've recovered the pool, pass back any information we * gathered while doing the load. */ if (state == SPA_LOAD_RECOVER && config != NULL) { fnvlist_add_nvlist(*config, ZPOOL_CONFIG_LOAD_INFO, spa->spa_load_info); } if (locked) { spa->spa_last_open_failed = 0; spa->spa_last_ubsync_txg = 0; spa->spa_load_txg = 0; mutex_exit(&spa_namespace_lock); } if (firstopen) zvol_create_minors_recursive(spa_name(spa)); *spapp = spa; return (0); } int spa_open_rewind(const char *name, spa_t **spapp, const void *tag, nvlist_t *policy, nvlist_t **config) { return (spa_open_common(name, spapp, tag, policy, config)); } int spa_open(const char *name, spa_t **spapp, const void *tag) { return (spa_open_common(name, spapp, tag, NULL, NULL)); } /* * Lookup the given spa_t, incrementing the inject count in the process, * preventing it from being exported or destroyed. */ spa_t * spa_inject_addref(char *name) { spa_t *spa; mutex_enter(&spa_namespace_lock); if ((spa = spa_lookup(name)) == NULL) { mutex_exit(&spa_namespace_lock); return (NULL); } spa->spa_inject_ref++; mutex_exit(&spa_namespace_lock); return (spa); } void spa_inject_delref(spa_t *spa) { mutex_enter(&spa_namespace_lock); spa->spa_inject_ref--; mutex_exit(&spa_namespace_lock); } /* * Add spares device information to the nvlist. */ static void spa_add_spares(spa_t *spa, nvlist_t *config) { nvlist_t **spares; uint_t i, nspares; nvlist_t *nvroot; uint64_t guid; vdev_stat_t *vs; uint_t vsc; uint64_t pool; ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER)); if (spa->spa_spares.sav_count == 0) return; nvroot = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE); VERIFY0(nvlist_lookup_nvlist_array(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES, &spares, &nspares)); if (nspares != 0) { fnvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, (const nvlist_t * const *)spares, nspares); VERIFY0(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares)); /* * Go through and find any spares which have since been * repurposed as an active spare. If this is the case, update * their status appropriately. */ for (i = 0; i < nspares; i++) { guid = fnvlist_lookup_uint64(spares[i], ZPOOL_CONFIG_GUID); VERIFY0(nvlist_lookup_uint64_array(spares[i], ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc)); if (spa_spare_exists(guid, &pool, NULL) && pool != 0ULL) { vs->vs_state = VDEV_STATE_CANT_OPEN; vs->vs_aux = VDEV_AUX_SPARED; } else { vs->vs_state = spa->spa_spares.sav_vdevs[i]->vdev_state; } } } } /* * Add l2cache device information to the nvlist, including vdev stats. */ static void spa_add_l2cache(spa_t *spa, nvlist_t *config) { nvlist_t **l2cache; uint_t i, j, nl2cache; nvlist_t *nvroot; uint64_t guid; vdev_t *vd; vdev_stat_t *vs; uint_t vsc; ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER)); if (spa->spa_l2cache.sav_count == 0) return; nvroot = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE); VERIFY0(nvlist_lookup_nvlist_array(spa->spa_l2cache.sav_config, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache)); if (nl2cache != 0) { fnvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, (const nvlist_t * const *)l2cache, nl2cache); VERIFY0(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache)); /* * Update level 2 cache device stats. */ for (i = 0; i < nl2cache; i++) { guid = fnvlist_lookup_uint64(l2cache[i], ZPOOL_CONFIG_GUID); vd = NULL; for (j = 0; j < spa->spa_l2cache.sav_count; j++) { if (guid == spa->spa_l2cache.sav_vdevs[j]->vdev_guid) { vd = spa->spa_l2cache.sav_vdevs[j]; break; } } ASSERT(vd != NULL); VERIFY0(nvlist_lookup_uint64_array(l2cache[i], ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc)); vdev_get_stats(vd, vs); vdev_config_generate_stats(vd, l2cache[i]); } } } static void spa_feature_stats_from_disk(spa_t *spa, nvlist_t *features) { zap_cursor_t zc; zap_attribute_t za; if (spa->spa_feat_for_read_obj != 0) { for (zap_cursor_init(&zc, spa->spa_meta_objset, spa->spa_feat_for_read_obj); zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) { ASSERT(za.za_integer_length == sizeof (uint64_t) && za.za_num_integers == 1); VERIFY0(nvlist_add_uint64(features, za.za_name, za.za_first_integer)); } zap_cursor_fini(&zc); } if (spa->spa_feat_for_write_obj != 0) { for (zap_cursor_init(&zc, spa->spa_meta_objset, spa->spa_feat_for_write_obj); zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) { ASSERT(za.za_integer_length == sizeof (uint64_t) && za.za_num_integers == 1); VERIFY0(nvlist_add_uint64(features, za.za_name, za.za_first_integer)); } zap_cursor_fini(&zc); } } static void spa_feature_stats_from_cache(spa_t *spa, nvlist_t *features) { int i; for (i = 0; i < SPA_FEATURES; i++) { zfeature_info_t feature = spa_feature_table[i]; uint64_t refcount; if (feature_get_refcount(spa, &feature, &refcount) != 0) continue; VERIFY0(nvlist_add_uint64(features, feature.fi_guid, refcount)); } } /* * Store a list of pool features and their reference counts in the * config. * * The first time this is called on a spa, allocate a new nvlist, fetch * the pool features and reference counts from disk, then save the list * in the spa. In subsequent calls on the same spa use the saved nvlist * and refresh its values from the cached reference counts. This * ensures we don't block here on I/O on a suspended pool so 'zpool * clear' can resume the pool. */ static void spa_add_feature_stats(spa_t *spa, nvlist_t *config) { nvlist_t *features; ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER)); mutex_enter(&spa->spa_feat_stats_lock); features = spa->spa_feat_stats; if (features != NULL) { spa_feature_stats_from_cache(spa, features); } else { VERIFY0(nvlist_alloc(&features, NV_UNIQUE_NAME, KM_SLEEP)); spa->spa_feat_stats = features; spa_feature_stats_from_disk(spa, features); } VERIFY0(nvlist_add_nvlist(config, ZPOOL_CONFIG_FEATURE_STATS, features)); mutex_exit(&spa->spa_feat_stats_lock); } int spa_get_stats(const char *name, nvlist_t **config, char *altroot, size_t buflen) { int error; spa_t *spa; *config = NULL; error = spa_open_common(name, &spa, FTAG, NULL, config); if (spa != NULL) { /* * This still leaves a window of inconsistency where the spares * or l2cache devices could change and the config would be * self-inconsistent. */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); if (*config != NULL) { uint64_t loadtimes[2]; loadtimes[0] = spa->spa_loaded_ts.tv_sec; loadtimes[1] = spa->spa_loaded_ts.tv_nsec; fnvlist_add_uint64_array(*config, ZPOOL_CONFIG_LOADED_TIME, loadtimes, 2); fnvlist_add_uint64(*config, ZPOOL_CONFIG_ERRCOUNT, spa_approx_errlog_size(spa)); if (spa_suspended(spa)) { fnvlist_add_uint64(*config, ZPOOL_CONFIG_SUSPENDED, spa->spa_failmode); fnvlist_add_uint64(*config, ZPOOL_CONFIG_SUSPENDED_REASON, spa->spa_suspended); } spa_add_spares(spa, *config); spa_add_l2cache(spa, *config); spa_add_feature_stats(spa, *config); } } /* * We want to get the alternate root even for faulted pools, so we cheat * and call spa_lookup() directly. */ if (altroot) { if (spa == NULL) { mutex_enter(&spa_namespace_lock); spa = spa_lookup(name); if (spa) spa_altroot(spa, altroot, buflen); else altroot[0] = '\0'; spa = NULL; mutex_exit(&spa_namespace_lock); } else { spa_altroot(spa, altroot, buflen); } } if (spa != NULL) { spa_config_exit(spa, SCL_CONFIG, FTAG); spa_close(spa, FTAG); } return (error); } /* * Validate that the auxiliary device array is well formed. We must have an * array of nvlists, each which describes a valid leaf vdev. If this is an * import (mode is VDEV_ALLOC_SPARE), then we allow corrupted spares to be * specified, as long as they are well-formed. */ static int spa_validate_aux_devs(spa_t *spa, nvlist_t *nvroot, uint64_t crtxg, int mode, spa_aux_vdev_t *sav, const char *config, uint64_t version, vdev_labeltype_t label) { nvlist_t **dev; uint_t i, ndev; vdev_t *vd; int error; ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); /* * It's acceptable to have no devs specified. */ if (nvlist_lookup_nvlist_array(nvroot, config, &dev, &ndev) != 0) return (0); if (ndev == 0) return (SET_ERROR(EINVAL)); /* * Make sure the pool is formatted with a version that supports this * device type. */ if (spa_version(spa) < version) return (SET_ERROR(ENOTSUP)); /* * Set the pending device list so we correctly handle device in-use * checking. */ sav->sav_pending = dev; sav->sav_npending = ndev; for (i = 0; i < ndev; i++) { if ((error = spa_config_parse(spa, &vd, dev[i], NULL, 0, mode)) != 0) goto out; if (!vd->vdev_ops->vdev_op_leaf) { vdev_free(vd); error = SET_ERROR(EINVAL); goto out; } vd->vdev_top = vd; if ((error = vdev_open(vd)) == 0 && (error = vdev_label_init(vd, crtxg, label)) == 0) { fnvlist_add_uint64(dev[i], ZPOOL_CONFIG_GUID, vd->vdev_guid); } vdev_free(vd); if (error && (mode != VDEV_ALLOC_SPARE && mode != VDEV_ALLOC_L2CACHE)) goto out; else error = 0; } out: sav->sav_pending = NULL; sav->sav_npending = 0; return (error); } static int spa_validate_aux(spa_t *spa, nvlist_t *nvroot, uint64_t crtxg, int mode) { int error; ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); if ((error = spa_validate_aux_devs(spa, nvroot, crtxg, mode, &spa->spa_spares, ZPOOL_CONFIG_SPARES, SPA_VERSION_SPARES, VDEV_LABEL_SPARE)) != 0) { return (error); } return (spa_validate_aux_devs(spa, nvroot, crtxg, mode, &spa->spa_l2cache, ZPOOL_CONFIG_L2CACHE, SPA_VERSION_L2CACHE, VDEV_LABEL_L2CACHE)); } static void spa_set_aux_vdevs(spa_aux_vdev_t *sav, nvlist_t **devs, int ndevs, const char *config) { int i; if (sav->sav_config != NULL) { nvlist_t **olddevs; uint_t oldndevs; nvlist_t **newdevs; /* * Generate new dev list by concatenating with the * current dev list. */ VERIFY0(nvlist_lookup_nvlist_array(sav->sav_config, config, &olddevs, &oldndevs)); newdevs = kmem_alloc(sizeof (void *) * (ndevs + oldndevs), KM_SLEEP); for (i = 0; i < oldndevs; i++) newdevs[i] = fnvlist_dup(olddevs[i]); for (i = 0; i < ndevs; i++) newdevs[i + oldndevs] = fnvlist_dup(devs[i]); fnvlist_remove(sav->sav_config, config); fnvlist_add_nvlist_array(sav->sav_config, config, (const nvlist_t * const *)newdevs, ndevs + oldndevs); for (i = 0; i < oldndevs + ndevs; i++) nvlist_free(newdevs[i]); kmem_free(newdevs, (oldndevs + ndevs) * sizeof (void *)); } else { /* * Generate a new dev list. */ sav->sav_config = fnvlist_alloc(); fnvlist_add_nvlist_array(sav->sav_config, config, (const nvlist_t * const *)devs, ndevs); } } /* * Stop and drop level 2 ARC devices */ void spa_l2cache_drop(spa_t *spa) { vdev_t *vd; int i; spa_aux_vdev_t *sav = &spa->spa_l2cache; for (i = 0; i < sav->sav_count; i++) { uint64_t pool; vd = sav->sav_vdevs[i]; ASSERT(vd != NULL); if (spa_l2cache_exists(vd->vdev_guid, &pool) && pool != 0ULL && l2arc_vdev_present(vd)) l2arc_remove_vdev(vd); } } /* * Verify encryption parameters for spa creation. If we are encrypting, we must * have the encryption feature flag enabled. */ static int spa_create_check_encryption_params(dsl_crypto_params_t *dcp, boolean_t has_encryption) { if (dcp->cp_crypt != ZIO_CRYPT_OFF && dcp->cp_crypt != ZIO_CRYPT_INHERIT && !has_encryption) return (SET_ERROR(ENOTSUP)); return (dmu_objset_create_crypt_check(NULL, dcp, NULL)); } /* * Pool Creation */ int spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props, nvlist_t *zplprops, dsl_crypto_params_t *dcp) { spa_t *spa; const char *altroot = NULL; vdev_t *rvd; dsl_pool_t *dp; dmu_tx_t *tx; int error = 0; uint64_t txg = TXG_INITIAL; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; uint64_t version, obj, ndraid = 0; boolean_t has_features; boolean_t has_encryption; boolean_t has_allocclass; spa_feature_t feat; const char *feat_name; const char *poolname; nvlist_t *nvl; if (props == NULL || nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_TNAME), &poolname) != 0) poolname = (char *)pool; /* * If this pool already exists, return failure. */ mutex_enter(&spa_namespace_lock); if (spa_lookup(poolname) != NULL) { mutex_exit(&spa_namespace_lock); return (SET_ERROR(EEXIST)); } /* * Allocate a new spa_t structure. */ nvl = fnvlist_alloc(); fnvlist_add_string(nvl, ZPOOL_CONFIG_POOL_NAME, pool); (void) nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot); spa = spa_add(poolname, nvl, altroot); fnvlist_free(nvl); spa_activate(spa, spa_mode_global); if (props && (error = spa_prop_validate(spa, props))) { spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (error); } /* * Temporary pool names should never be written to disk. */ if (poolname != pool) spa->spa_import_flags |= ZFS_IMPORT_TEMP_NAME; has_features = B_FALSE; has_encryption = B_FALSE; has_allocclass = B_FALSE; for (nvpair_t *elem = nvlist_next_nvpair(props, NULL); elem != NULL; elem = nvlist_next_nvpair(props, elem)) { if (zpool_prop_feature(nvpair_name(elem))) { has_features = B_TRUE; feat_name = strchr(nvpair_name(elem), '@') + 1; VERIFY0(zfeature_lookup_name(feat_name, &feat)); if (feat == SPA_FEATURE_ENCRYPTION) has_encryption = B_TRUE; if (feat == SPA_FEATURE_ALLOCATION_CLASSES) has_allocclass = B_TRUE; } } /* verify encryption params, if they were provided */ if (dcp != NULL) { error = spa_create_check_encryption_params(dcp, has_encryption); if (error != 0) { spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (error); } } if (!has_allocclass && zfs_special_devs(nvroot, NULL)) { spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (ENOTSUP); } if (has_features || nvlist_lookup_uint64(props, zpool_prop_to_name(ZPOOL_PROP_VERSION), &version) != 0) { version = SPA_VERSION; } ASSERT(SPA_VERSION_IS_SUPPORTED(version)); spa->spa_first_txg = txg; spa->spa_uberblock.ub_txg = txg - 1; spa->spa_uberblock.ub_version = version; spa->spa_ubsync = spa->spa_uberblock; spa->spa_load_state = SPA_LOAD_CREATE; spa->spa_removing_phys.sr_state = DSS_NONE; spa->spa_removing_phys.sr_removing_vdev = -1; spa->spa_removing_phys.sr_prev_indirect_vdev = -1; spa->spa_indirect_vdevs_loaded = B_TRUE; /* * Create "The Godfather" zio to hold all async IOs */ spa->spa_async_zio_root = kmem_alloc(max_ncpus * sizeof (void *), KM_SLEEP); for (int i = 0; i < max_ncpus; i++) { spa->spa_async_zio_root[i] = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_GODFATHER); } /* * Create the root vdev. */ spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); error = spa_config_parse(spa, &rvd, nvroot, NULL, 0, VDEV_ALLOC_ADD); ASSERT(error != 0 || rvd != NULL); ASSERT(error != 0 || spa->spa_root_vdev == rvd); if (error == 0 && !zfs_allocatable_devs(nvroot)) error = SET_ERROR(EINVAL); if (error == 0 && (error = vdev_create(rvd, txg, B_FALSE)) == 0 && (error = vdev_draid_spare_create(nvroot, rvd, &ndraid, 0)) == 0 && (error = spa_validate_aux(spa, nvroot, txg, VDEV_ALLOC_ADD)) == 0) { /* * instantiate the metaslab groups (this will dirty the vdevs) * we can no longer error exit past this point */ for (int c = 0; error == 0 && c < rvd->vdev_children; c++) { vdev_t *vd = rvd->vdev_child[c]; vdev_metaslab_set_size(vd); vdev_expand(vd, txg); } } spa_config_exit(spa, SCL_ALL, FTAG); if (error != 0) { spa_unload(spa); spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (error); } /* * Get the list of spares, if specified. */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { spa->spa_spares.sav_config = fnvlist_alloc(); fnvlist_add_nvlist_array(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES, (const nvlist_t * const *)spares, nspares); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_spares(spa); spa_config_exit(spa, SCL_ALL, FTAG); spa->spa_spares.sav_sync = B_TRUE; } /* * Get the list of level 2 cache devices, if specified. */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { VERIFY0(nvlist_alloc(&spa->spa_l2cache.sav_config, NV_UNIQUE_NAME, KM_SLEEP)); fnvlist_add_nvlist_array(spa->spa_l2cache.sav_config, ZPOOL_CONFIG_L2CACHE, (const nvlist_t * const *)l2cache, nl2cache); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_l2cache(spa); spa_config_exit(spa, SCL_ALL, FTAG); spa->spa_l2cache.sav_sync = B_TRUE; } spa->spa_is_initializing = B_TRUE; spa->spa_dsl_pool = dp = dsl_pool_create(spa, zplprops, dcp, txg); spa->spa_is_initializing = B_FALSE; /* * Create DDTs (dedup tables). */ ddt_create(spa); /* * Create BRT table and BRT table object. */ brt_create(spa); spa_update_dspace(spa); tx = dmu_tx_create_assigned(dp, txg); /* * Create the pool's history object. */ if (version >= SPA_VERSION_ZPOOL_HISTORY && !spa->spa_history) spa_history_create_obj(spa, tx); spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_CREATE); spa_history_log_version(spa, "create", tx); /* * Create the pool config object. */ spa->spa_config_object = dmu_object_alloc(spa->spa_meta_objset, DMU_OT_PACKED_NVLIST, SPA_CONFIG_BLOCKSIZE, DMU_OT_PACKED_NVLIST_SIZE, sizeof (uint64_t), tx); if (zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CONFIG, sizeof (uint64_t), 1, &spa->spa_config_object, tx) != 0) { cmn_err(CE_PANIC, "failed to add pool config"); } if (zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CREATION_VERSION, sizeof (uint64_t), 1, &version, tx) != 0) { cmn_err(CE_PANIC, "failed to add pool version"); } /* Newly created pools with the right version are always deflated. */ if (version >= SPA_VERSION_RAIDZ_DEFLATE) { spa->spa_deflate = TRUE; if (zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DEFLATE, sizeof (uint64_t), 1, &spa->spa_deflate, tx) != 0) { cmn_err(CE_PANIC, "failed to add deflate"); } } /* * Create the deferred-free bpobj. Turn off compression * because sync-to-convergence takes longer if the blocksize * keeps changing. */ obj = bpobj_alloc(spa->spa_meta_objset, 1 << 14, tx); dmu_object_set_compress(spa->spa_meta_objset, obj, ZIO_COMPRESS_OFF, tx); if (zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_SYNC_BPOBJ, sizeof (uint64_t), 1, &obj, tx) != 0) { cmn_err(CE_PANIC, "failed to add bpobj"); } VERIFY3U(0, ==, bpobj_open(&spa->spa_deferred_bpobj, spa->spa_meta_objset, obj)); /* * Generate some random noise for salted checksums to operate on. */ (void) random_get_pseudo_bytes(spa->spa_cksum_salt.zcs_bytes, sizeof (spa->spa_cksum_salt.zcs_bytes)); /* * Set pool properties. */ spa->spa_bootfs = zpool_prop_default_numeric(ZPOOL_PROP_BOOTFS); spa->spa_delegation = zpool_prop_default_numeric(ZPOOL_PROP_DELEGATION); spa->spa_failmode = zpool_prop_default_numeric(ZPOOL_PROP_FAILUREMODE); spa->spa_autoexpand = zpool_prop_default_numeric(ZPOOL_PROP_AUTOEXPAND); spa->spa_multihost = zpool_prop_default_numeric(ZPOOL_PROP_MULTIHOST); spa->spa_autotrim = zpool_prop_default_numeric(ZPOOL_PROP_AUTOTRIM); + spa->spa_dedup_table_quota = + zpool_prop_default_numeric(ZPOOL_PROP_DEDUP_TABLE_QUOTA); if (props != NULL) { spa_configfile_set(spa, props, B_FALSE); spa_sync_props(props, tx); } for (int i = 0; i < ndraid; i++) spa_feature_incr(spa, SPA_FEATURE_DRAID, tx); dmu_tx_commit(tx); spa->spa_sync_on = B_TRUE; txg_sync_start(dp); mmp_thread_start(spa); txg_wait_synced(dp, txg); spa_spawn_aux_threads(spa); spa_write_cachefile(spa, B_FALSE, B_TRUE, B_TRUE); /* * Don't count references from objsets that are already closed * and are making their way through the eviction process. */ spa_evicting_os_wait(spa); spa->spa_minref = zfs_refcount_count(&spa->spa_refcount); spa->spa_load_state = SPA_LOAD_NONE; spa_import_os(spa); mutex_exit(&spa_namespace_lock); return (0); } /* * Import a non-root pool into the system. */ int spa_import(char *pool, nvlist_t *config, nvlist_t *props, uint64_t flags) { spa_t *spa; const char *altroot = NULL; spa_load_state_t state = SPA_LOAD_IMPORT; zpool_load_policy_t policy; spa_mode_t mode = spa_mode_global; uint64_t readonly = B_FALSE; int error; nvlist_t *nvroot; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; /* * If a pool with this name exists, return failure. */ mutex_enter(&spa_namespace_lock); if (spa_lookup(pool) != NULL) { mutex_exit(&spa_namespace_lock); return (SET_ERROR(EEXIST)); } /* * Create and initialize the spa structure. */ (void) nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot); (void) nvlist_lookup_uint64(props, zpool_prop_to_name(ZPOOL_PROP_READONLY), &readonly); if (readonly) mode = SPA_MODE_READ; spa = spa_add(pool, config, altroot); spa->spa_import_flags = flags; /* * Verbatim import - Take a pool and insert it into the namespace * as if it had been loaded at boot. */ if (spa->spa_import_flags & ZFS_IMPORT_VERBATIM) { if (props != NULL) spa_configfile_set(spa, props, B_FALSE); spa_write_cachefile(spa, B_FALSE, B_TRUE, B_FALSE); spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_IMPORT); zfs_dbgmsg("spa_import: verbatim import of %s", pool); mutex_exit(&spa_namespace_lock); return (0); } spa_activate(spa, mode); /* * Don't start async tasks until we know everything is healthy. */ spa_async_suspend(spa); zpool_get_load_policy(config, &policy); if (policy.zlp_rewind & ZPOOL_DO_REWIND) state = SPA_LOAD_RECOVER; spa->spa_config_source = SPA_CONFIG_SRC_TRYIMPORT; if (state != SPA_LOAD_RECOVER) { spa->spa_last_ubsync_txg = spa->spa_load_txg = 0; zfs_dbgmsg("spa_import: importing %s", pool); } else { zfs_dbgmsg("spa_import: importing %s, max_txg=%lld " "(RECOVERY MODE)", pool, (longlong_t)policy.zlp_txg); } error = spa_load_best(spa, state, policy.zlp_txg, policy.zlp_rewind); /* * Propagate anything learned while loading the pool and pass it * back to caller (i.e. rewind info, missing devices, etc). */ fnvlist_add_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, spa->spa_load_info); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); /* * Toss any existing sparelist, as it doesn't have any validity * anymore, and conflicts with spa_has_spare(). */ if (spa->spa_spares.sav_config) { nvlist_free(spa->spa_spares.sav_config); spa->spa_spares.sav_config = NULL; spa_load_spares(spa); } if (spa->spa_l2cache.sav_config) { nvlist_free(spa->spa_l2cache.sav_config); spa->spa_l2cache.sav_config = NULL; spa_load_l2cache(spa); } nvroot = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE); spa_config_exit(spa, SCL_ALL, FTAG); if (props != NULL) spa_configfile_set(spa, props, B_FALSE); if (error != 0 || (props && spa_writeable(spa) && (error = spa_prop_set(spa, props)))) { spa_unload(spa); spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (error); } spa_async_resume(spa); /* * Override any spares and level 2 cache devices as specified by * the user, as these may have correct device names/devids, etc. */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { if (spa->spa_spares.sav_config) fnvlist_remove(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES); else spa->spa_spares.sav_config = fnvlist_alloc(); fnvlist_add_nvlist_array(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES, (const nvlist_t * const *)spares, nspares); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_spares(spa); spa_config_exit(spa, SCL_ALL, FTAG); spa->spa_spares.sav_sync = B_TRUE; } if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { if (spa->spa_l2cache.sav_config) fnvlist_remove(spa->spa_l2cache.sav_config, ZPOOL_CONFIG_L2CACHE); else spa->spa_l2cache.sav_config = fnvlist_alloc(); fnvlist_add_nvlist_array(spa->spa_l2cache.sav_config, ZPOOL_CONFIG_L2CACHE, (const nvlist_t * const *)l2cache, nl2cache); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa_load_l2cache(spa); spa_config_exit(spa, SCL_ALL, FTAG); spa->spa_l2cache.sav_sync = B_TRUE; } /* * Check for any removed devices. */ if (spa->spa_autoreplace) { spa_aux_check_removed(&spa->spa_spares); spa_aux_check_removed(&spa->spa_l2cache); } if (spa_writeable(spa)) { /* * Update the config cache to include the newly-imported pool. */ spa_config_update(spa, SPA_CONFIG_UPDATE_POOL); } /* * It's possible that the pool was expanded while it was exported. * We kick off an async task to handle this for us. */ spa_async_request(spa, SPA_ASYNC_AUTOEXPAND); spa_history_log_version(spa, "import", NULL); spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_IMPORT); mutex_exit(&spa_namespace_lock); zvol_create_minors_recursive(pool); spa_import_os(spa); return (0); } nvlist_t * spa_tryimport(nvlist_t *tryconfig) { nvlist_t *config = NULL; const char *poolname, *cachefile; spa_t *spa; uint64_t state; int error; zpool_load_policy_t policy; if (nvlist_lookup_string(tryconfig, ZPOOL_CONFIG_POOL_NAME, &poolname)) return (NULL); if (nvlist_lookup_uint64(tryconfig, ZPOOL_CONFIG_POOL_STATE, &state)) return (NULL); /* * Create and initialize the spa structure. */ char *name = kmem_alloc(MAXPATHLEN, KM_SLEEP); (void) snprintf(name, MAXPATHLEN, "%s-%llx-%s", TRYIMPORT_NAME, (u_longlong_t)(uintptr_t)curthread, poolname); mutex_enter(&spa_namespace_lock); spa = spa_add(name, tryconfig, NULL); spa_activate(spa, SPA_MODE_READ); kmem_free(name, MAXPATHLEN); /* * Rewind pool if a max txg was provided. */ zpool_get_load_policy(spa->spa_config, &policy); if (policy.zlp_txg != UINT64_MAX) { spa->spa_load_max_txg = policy.zlp_txg; spa->spa_extreme_rewind = B_TRUE; zfs_dbgmsg("spa_tryimport: importing %s, max_txg=%lld", poolname, (longlong_t)policy.zlp_txg); } else { zfs_dbgmsg("spa_tryimport: importing %s", poolname); } if (nvlist_lookup_string(tryconfig, ZPOOL_CONFIG_CACHEFILE, &cachefile) == 0) { zfs_dbgmsg("spa_tryimport: using cachefile '%s'", cachefile); spa->spa_config_source = SPA_CONFIG_SRC_CACHEFILE; } else { spa->spa_config_source = SPA_CONFIG_SRC_SCAN; } /* * spa_import() relies on a pool config fetched by spa_try_import() * for spare/cache devices. Import flags are not passed to * spa_tryimport(), which makes it return early due to a missing log * device and missing retrieving the cache device and spare eventually. * Passing ZFS_IMPORT_MISSING_LOG to spa_tryimport() makes it fetch * the correct configuration regardless of the missing log device. */ spa->spa_import_flags |= ZFS_IMPORT_MISSING_LOG; error = spa_load(spa, SPA_LOAD_TRYIMPORT, SPA_IMPORT_EXISTING); /* * If 'tryconfig' was at least parsable, return the current config. */ if (spa->spa_root_vdev != NULL) { config = spa_config_generate(spa, NULL, -1ULL, B_TRUE); fnvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME, poolname); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE, state); fnvlist_add_uint64(config, ZPOOL_CONFIG_TIMESTAMP, spa->spa_uberblock.ub_timestamp); fnvlist_add_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, spa->spa_load_info); fnvlist_add_uint64(config, ZPOOL_CONFIG_ERRATA, spa->spa_errata); /* * If the bootfs property exists on this pool then we * copy it out so that external consumers can tell which * pools are bootable. */ if ((!error || error == EEXIST) && spa->spa_bootfs) { char *tmpname = kmem_alloc(MAXPATHLEN, KM_SLEEP); /* * We have to play games with the name since the * pool was opened as TRYIMPORT_NAME. */ if (dsl_dsobj_to_dsname(spa_name(spa), spa->spa_bootfs, tmpname) == 0) { char *cp; char *dsname; dsname = kmem_alloc(MAXPATHLEN, KM_SLEEP); cp = strchr(tmpname, '/'); if (cp == NULL) { (void) strlcpy(dsname, tmpname, MAXPATHLEN); } else { (void) snprintf(dsname, MAXPATHLEN, "%s/%s", poolname, ++cp); } fnvlist_add_string(config, ZPOOL_CONFIG_BOOTFS, dsname); kmem_free(dsname, MAXPATHLEN); } kmem_free(tmpname, MAXPATHLEN); } /* * Add the list of hot spares and level 2 cache devices. */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); spa_add_spares(spa, config); spa_add_l2cache(spa, config); spa_config_exit(spa, SCL_CONFIG, FTAG); } spa_unload(spa); spa_deactivate(spa); spa_remove(spa); mutex_exit(&spa_namespace_lock); return (config); } /* * Pool export/destroy * * The act of destroying or exporting a pool is very simple. We make sure there * is no more pending I/O and any references to the pool are gone. Then, we * update the pool state and sync all the labels to disk, removing the * configuration from the cache afterwards. If the 'hardforce' flag is set, then * we don't sync the labels or remove the configuration cache. */ static int spa_export_common(const char *pool, int new_state, nvlist_t **oldconfig, boolean_t force, boolean_t hardforce) { int error = 0; spa_t *spa; hrtime_t export_start = gethrtime(); if (oldconfig) *oldconfig = NULL; if (!(spa_mode_global & SPA_MODE_WRITE)) return (SET_ERROR(EROFS)); mutex_enter(&spa_namespace_lock); if ((spa = spa_lookup(pool)) == NULL) { mutex_exit(&spa_namespace_lock); return (SET_ERROR(ENOENT)); } if (spa->spa_is_exporting) { /* the pool is being exported by another thread */ mutex_exit(&spa_namespace_lock); return (SET_ERROR(ZFS_ERR_EXPORT_IN_PROGRESS)); } spa->spa_is_exporting = B_TRUE; /* * Put a hold on the pool, drop the namespace lock, stop async tasks * and see if we can export. */ spa_open_ref(spa, FTAG); mutex_exit(&spa_namespace_lock); spa_async_suspend(spa); if (spa->spa_zvol_taskq) { zvol_remove_minors(spa, spa_name(spa), B_TRUE); taskq_wait(spa->spa_zvol_taskq); } mutex_enter(&spa_namespace_lock); spa->spa_export_thread = curthread; spa_close(spa, FTAG); if (spa->spa_state == POOL_STATE_UNINITIALIZED) { mutex_exit(&spa_namespace_lock); goto export_spa; } /* * The pool will be in core if it's openable, in which case we can * modify its state. Objsets may be open only because they're dirty, * so we have to force it to sync before checking spa_refcnt. */ if (spa->spa_sync_on) { txg_wait_synced(spa->spa_dsl_pool, 0); spa_evicting_os_wait(spa); } /* * A pool cannot be exported or destroyed if there are active * references. If we are resetting a pool, allow references by * fault injection handlers. */ if (!spa_refcount_zero(spa) || (spa->spa_inject_ref != 0)) { error = SET_ERROR(EBUSY); goto fail; } mutex_exit(&spa_namespace_lock); /* * At this point we no longer hold the spa_namespace_lock and * there were no references on the spa. Future spa_lookups will * notice the spa->spa_export_thread and wait until we signal * that we are finshed. */ if (spa->spa_sync_on) { vdev_t *rvd = spa->spa_root_vdev; /* * A pool cannot be exported if it has an active shared spare. * This is to prevent other pools stealing the active spare * from an exported pool. At user's own will, such pool can * be forcedly exported. */ if (!force && new_state == POOL_STATE_EXPORTED && spa_has_active_shared_spare(spa)) { error = SET_ERROR(EXDEV); mutex_enter(&spa_namespace_lock); goto fail; } /* * We're about to export or destroy this pool. Make sure * we stop all initialization and trim activity here before * we set the spa_final_txg. This will ensure that all * dirty data resulting from the initialization is * committed to disk before we unload the pool. */ vdev_initialize_stop_all(rvd, VDEV_INITIALIZE_ACTIVE); vdev_trim_stop_all(rvd, VDEV_TRIM_ACTIVE); vdev_autotrim_stop_all(spa); vdev_rebuild_stop_all(spa); /* * We want this to be reflected on every label, * so mark them all dirty. spa_unload() will do the * final sync that pushes these changes out. */ if (new_state != POOL_STATE_UNINITIALIZED && !hardforce) { spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa->spa_state = new_state; vdev_config_dirty(rvd); spa_config_exit(spa, SCL_ALL, FTAG); } /* * If the log space map feature is enabled and the pool is * getting exported (but not destroyed), we want to spend some * time flushing as many metaslabs as we can in an attempt to * destroy log space maps and save import time. This has to be * done before we set the spa_final_txg, otherwise * spa_sync() -> spa_flush_metaslabs() may dirty the final TXGs. * spa_should_flush_logs_on_unload() should be called after * spa_state has been set to the new_state. */ if (spa_should_flush_logs_on_unload(spa)) spa_unload_log_sm_flush_all(spa); if (new_state != POOL_STATE_UNINITIALIZED && !hardforce) { spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); spa->spa_final_txg = spa_last_synced_txg(spa) + TXG_DEFER_SIZE + 1; spa_config_exit(spa, SCL_ALL, FTAG); } } export_spa: spa_export_os(spa); if (new_state == POOL_STATE_DESTROYED) spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_DESTROY); else if (new_state == POOL_STATE_EXPORTED) spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_EXPORT); if (spa->spa_state != POOL_STATE_UNINITIALIZED) { spa_unload(spa); spa_deactivate(spa); } if (oldconfig && spa->spa_config) *oldconfig = fnvlist_dup(spa->spa_config); if (new_state == POOL_STATE_EXPORTED) zio_handle_export_delay(spa, gethrtime() - export_start); /* * Take the namespace lock for the actual spa_t removal */ mutex_enter(&spa_namespace_lock); if (new_state != POOL_STATE_UNINITIALIZED) { if (!hardforce) spa_write_cachefile(spa, B_TRUE, B_TRUE, B_FALSE); spa_remove(spa); } else { /* * If spa_remove() is not called for this spa_t and * there is any possibility that it can be reused, * we make sure to reset the exporting flag. */ spa->spa_is_exporting = B_FALSE; spa->spa_export_thread = NULL; } /* * Wake up any waiters in spa_lookup() */ cv_broadcast(&spa_namespace_cv); mutex_exit(&spa_namespace_lock); return (0); fail: spa->spa_is_exporting = B_FALSE; spa->spa_export_thread = NULL; spa_async_resume(spa); /* * Wake up any waiters in spa_lookup() */ cv_broadcast(&spa_namespace_cv); mutex_exit(&spa_namespace_lock); return (error); } /* * Destroy a storage pool. */ int spa_destroy(const char *pool) { return (spa_export_common(pool, POOL_STATE_DESTROYED, NULL, B_FALSE, B_FALSE)); } /* * Export a storage pool. */ int spa_export(const char *pool, nvlist_t **oldconfig, boolean_t force, boolean_t hardforce) { return (spa_export_common(pool, POOL_STATE_EXPORTED, oldconfig, force, hardforce)); } /* * Similar to spa_export(), this unloads the spa_t without actually removing it * from the namespace in any way. */ int spa_reset(const char *pool) { return (spa_export_common(pool, POOL_STATE_UNINITIALIZED, NULL, B_FALSE, B_FALSE)); } /* * ========================================================================== * Device manipulation * ========================================================================== */ /* * This is called as a synctask to increment the draid feature flag */ static void spa_draid_feature_incr(void *arg, dmu_tx_t *tx) { spa_t *spa = dmu_tx_pool(tx)->dp_spa; int draid = (int)(uintptr_t)arg; for (int c = 0; c < draid; c++) spa_feature_incr(spa, SPA_FEATURE_DRAID, tx); } /* * Add a device to a storage pool. */ int spa_vdev_add(spa_t *spa, nvlist_t *nvroot, boolean_t check_ashift) { uint64_t txg, ndraid = 0; int error; vdev_t *rvd = spa->spa_root_vdev; vdev_t *vd, *tvd; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; ASSERT(spa_writeable(spa)); txg = spa_vdev_enter(spa); if ((error = spa_config_parse(spa, &vd, nvroot, NULL, 0, VDEV_ALLOC_ADD)) != 0) return (spa_vdev_exit(spa, NULL, txg, error)); spa->spa_pending_vdev = vd; /* spa_vdev_exit() will clear this */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) != 0) nspares = 0; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) != 0) nl2cache = 0; if (vd->vdev_children == 0 && nspares == 0 && nl2cache == 0) return (spa_vdev_exit(spa, vd, txg, EINVAL)); if (vd->vdev_children != 0 && (error = vdev_create(vd, txg, B_FALSE)) != 0) { return (spa_vdev_exit(spa, vd, txg, error)); } /* * The virtual dRAID spares must be added after vdev tree is created * and the vdev guids are generated. The guid of their associated * dRAID is stored in the config and used when opening the spare. */ if ((error = vdev_draid_spare_create(nvroot, vd, &ndraid, rvd->vdev_children)) == 0) { if (ndraid > 0 && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) != 0) nspares = 0; } else { return (spa_vdev_exit(spa, vd, txg, error)); } /* * We must validate the spares and l2cache devices after checking the * children. Otherwise, vdev_inuse() will blindly overwrite the spare. */ if ((error = spa_validate_aux(spa, nvroot, txg, VDEV_ALLOC_ADD)) != 0) return (spa_vdev_exit(spa, vd, txg, error)); /* * If we are in the middle of a device removal, we can only add * devices which match the existing devices in the pool. * If we are in the middle of a removal, or have some indirect * vdevs, we can not add raidz or dRAID top levels. */ if (spa->spa_vdev_removal != NULL || spa->spa_removing_phys.sr_prev_indirect_vdev != -1) { for (int c = 0; c < vd->vdev_children; c++) { tvd = vd->vdev_child[c]; if (spa->spa_vdev_removal != NULL && tvd->vdev_ashift != spa->spa_max_ashift) { return (spa_vdev_exit(spa, vd, txg, EINVAL)); } /* Fail if top level vdev is raidz or a dRAID */ if (vdev_get_nparity(tvd) != 0) return (spa_vdev_exit(spa, vd, txg, EINVAL)); /* * Need the top level mirror to be * a mirror of leaf vdevs only */ if (tvd->vdev_ops == &vdev_mirror_ops) { for (uint64_t cid = 0; cid < tvd->vdev_children; cid++) { vdev_t *cvd = tvd->vdev_child[cid]; if (!cvd->vdev_ops->vdev_op_leaf) { return (spa_vdev_exit(spa, vd, txg, EINVAL)); } } } } } if (check_ashift && spa->spa_max_ashift == spa->spa_min_ashift) { for (int c = 0; c < vd->vdev_children; c++) { tvd = vd->vdev_child[c]; if (tvd->vdev_ashift != spa->spa_max_ashift) { return (spa_vdev_exit(spa, vd, txg, ZFS_ERR_ASHIFT_MISMATCH)); } } } for (int c = 0; c < vd->vdev_children; c++) { tvd = vd->vdev_child[c]; vdev_remove_child(vd, tvd); tvd->vdev_id = rvd->vdev_children; vdev_add_child(rvd, tvd); vdev_config_dirty(tvd); } if (nspares != 0) { spa_set_aux_vdevs(&spa->spa_spares, spares, nspares, ZPOOL_CONFIG_SPARES); spa_load_spares(spa); spa->spa_spares.sav_sync = B_TRUE; } if (nl2cache != 0) { spa_set_aux_vdevs(&spa->spa_l2cache, l2cache, nl2cache, ZPOOL_CONFIG_L2CACHE); spa_load_l2cache(spa); spa->spa_l2cache.sav_sync = B_TRUE; } /* * We can't increment a feature while holding spa_vdev so we * have to do it in a synctask. */ if (ndraid != 0) { dmu_tx_t *tx; tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg); dsl_sync_task_nowait(spa->spa_dsl_pool, spa_draid_feature_incr, (void *)(uintptr_t)ndraid, tx); dmu_tx_commit(tx); } /* * We have to be careful when adding new vdevs to an existing pool. * If other threads start allocating from these vdevs before we * sync the config cache, and we lose power, then upon reboot we may * fail to open the pool because there are DVAs that the config cache * can't translate. Therefore, we first add the vdevs without * initializing metaslabs; sync the config cache (via spa_vdev_exit()); * and then let spa_config_update() initialize the new metaslabs. * * spa_load() checks for added-but-not-initialized vdevs, so that * if we lose power at any point in this sequence, the remaining * steps will be completed the next time we load the pool. */ (void) spa_vdev_exit(spa, vd, txg, 0); mutex_enter(&spa_namespace_lock); spa_config_update(spa, SPA_CONFIG_UPDATE_POOL); spa_event_notify(spa, NULL, NULL, ESC_ZFS_VDEV_ADD); mutex_exit(&spa_namespace_lock); return (0); } /* * Attach a device to a vdev specified by its guid. The vdev type can be * a mirror, a raidz, or a leaf device that is also a top-level (e.g. a * single device). When the vdev is a single device, a mirror vdev will be * automatically inserted. * * If 'replacing' is specified, the new device is intended to replace the * existing device; in this case the two devices are made into their own * mirror using the 'replacing' vdev, which is functionally identical to * the mirror vdev (it actually reuses all the same ops) but has a few * extra rules: you can't attach to it after it's been created, and upon * completion of resilvering, the first disk (the one being replaced) * is automatically detached. * * If 'rebuild' is specified, then sequential reconstruction (a.ka. rebuild) * should be performed instead of traditional healing reconstruction. From * an administrators perspective these are both resilver operations. */ int spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot, int replacing, int rebuild) { uint64_t txg, dtl_max_txg; vdev_t *rvd = spa->spa_root_vdev; vdev_t *oldvd, *newvd, *newrootvd, *pvd, *tvd; vdev_ops_t *pvops; char *oldvdpath, *newvdpath; int newvd_isspare = B_FALSE; int error; ASSERT(spa_writeable(spa)); txg = spa_vdev_enter(spa); oldvd = spa_lookup_by_guid(spa, guid, B_FALSE); ASSERT(MUTEX_HELD(&spa_namespace_lock)); if (spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT)) { error = (spa_has_checkpoint(spa)) ? ZFS_ERR_CHECKPOINT_EXISTS : ZFS_ERR_DISCARDING_CHECKPOINT; return (spa_vdev_exit(spa, NULL, txg, error)); } if (rebuild) { if (!spa_feature_is_enabled(spa, SPA_FEATURE_DEVICE_REBUILD)) return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); if (dsl_scan_resilvering(spa_get_dsl(spa)) || dsl_scan_resilver_scheduled(spa_get_dsl(spa))) { return (spa_vdev_exit(spa, NULL, txg, ZFS_ERR_RESILVER_IN_PROGRESS)); } } else { if (vdev_rebuild_active(rvd)) return (spa_vdev_exit(spa, NULL, txg, ZFS_ERR_REBUILD_IN_PROGRESS)); } if (spa->spa_vdev_removal != NULL) { return (spa_vdev_exit(spa, NULL, txg, ZFS_ERR_DEVRM_IN_PROGRESS)); } if (oldvd == NULL) return (spa_vdev_exit(spa, NULL, txg, ENODEV)); boolean_t raidz = oldvd->vdev_ops == &vdev_raidz_ops; if (raidz) { if (!spa_feature_is_enabled(spa, SPA_FEATURE_RAIDZ_EXPANSION)) return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); /* * Can't expand a raidz while prior expand is in progress. */ if (spa->spa_raidz_expand != NULL) { return (spa_vdev_exit(spa, NULL, txg, ZFS_ERR_RAIDZ_EXPAND_IN_PROGRESS)); } } else if (!oldvd->vdev_ops->vdev_op_leaf) { return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); } if (raidz) pvd = oldvd; else pvd = oldvd->vdev_parent; if (spa_config_parse(spa, &newrootvd, nvroot, NULL, 0, VDEV_ALLOC_ATTACH) != 0) return (spa_vdev_exit(spa, NULL, txg, EINVAL)); if (newrootvd->vdev_children != 1) return (spa_vdev_exit(spa, newrootvd, txg, EINVAL)); newvd = newrootvd->vdev_child[0]; if (!newvd->vdev_ops->vdev_op_leaf) return (spa_vdev_exit(spa, newrootvd, txg, EINVAL)); if ((error = vdev_create(newrootvd, txg, replacing)) != 0) return (spa_vdev_exit(spa, newrootvd, txg, error)); /* * log, dedup and special vdevs should not be replaced by spares. */ if ((oldvd->vdev_top->vdev_alloc_bias != VDEV_BIAS_NONE || oldvd->vdev_top->vdev_islog) && newvd->vdev_isspare) { return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); } /* * A dRAID spare can only replace a child of its parent dRAID vdev. */ if (newvd->vdev_ops == &vdev_draid_spare_ops && oldvd->vdev_top != vdev_draid_spare_get_parent(newvd)) { return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); } if (rebuild) { /* * For rebuilds, the top vdev must support reconstruction * using only space maps. This means the only allowable * vdevs types are the root vdev, a mirror, or dRAID. */ tvd = pvd; if (pvd->vdev_top != NULL) tvd = pvd->vdev_top; if (tvd->vdev_ops != &vdev_mirror_ops && tvd->vdev_ops != &vdev_root_ops && tvd->vdev_ops != &vdev_draid_ops) { return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); } } if (!replacing) { /* * For attach, the only allowable parent is a mirror or * the root vdev. A raidz vdev can be attached to, but * you cannot attach to a raidz child. */ if (pvd->vdev_ops != &vdev_mirror_ops && pvd->vdev_ops != &vdev_root_ops && !raidz) return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); pvops = &vdev_mirror_ops; } else { /* * Active hot spares can only be replaced by inactive hot * spares. */ if (pvd->vdev_ops == &vdev_spare_ops && oldvd->vdev_isspare && !spa_has_spare(spa, newvd->vdev_guid)) return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); /* * If the source is a hot spare, and the parent isn't already a * spare, then we want to create a new hot spare. Otherwise, we * want to create a replacing vdev. The user is not allowed to * attach to a spared vdev child unless the 'isspare' state is * the same (spare replaces spare, non-spare replaces * non-spare). */ if (pvd->vdev_ops == &vdev_replacing_ops && spa_version(spa) < SPA_VERSION_MULTI_REPLACE) { return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); } else if (pvd->vdev_ops == &vdev_spare_ops && newvd->vdev_isspare != oldvd->vdev_isspare) { return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); } if (newvd->vdev_isspare) pvops = &vdev_spare_ops; else pvops = &vdev_replacing_ops; } /* * Make sure the new device is big enough. */ vdev_t *min_vdev = raidz ? oldvd->vdev_child[0] : oldvd; if (newvd->vdev_asize < vdev_get_min_asize(min_vdev)) return (spa_vdev_exit(spa, newrootvd, txg, EOVERFLOW)); /* * The new device cannot have a higher alignment requirement * than the top-level vdev. */ if (newvd->vdev_ashift > oldvd->vdev_top->vdev_ashift) return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); /* * RAIDZ-expansion-specific checks. */ if (raidz) { if (vdev_raidz_attach_check(newvd) != 0) return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP)); /* * Fail early if a child is not healthy or being replaced */ for (int i = 0; i < oldvd->vdev_children; i++) { if (vdev_is_dead(oldvd->vdev_child[i]) || !oldvd->vdev_child[i]->vdev_ops->vdev_op_leaf) { return (spa_vdev_exit(spa, newrootvd, txg, ENXIO)); } /* Also fail if reserved boot area is in-use */ if (vdev_check_boot_reserve(spa, oldvd->vdev_child[i]) != 0) { return (spa_vdev_exit(spa, newrootvd, txg, EADDRINUSE)); } } } if (raidz) { /* * Note: oldvdpath is freed by spa_strfree(), but * kmem_asprintf() is freed by kmem_strfree(), so we have to * move it to a spa_strdup-ed string. */ char *tmp = kmem_asprintf("raidz%u-%u", (uint_t)vdev_get_nparity(oldvd), (uint_t)oldvd->vdev_id); oldvdpath = spa_strdup(tmp); kmem_strfree(tmp); } else { oldvdpath = spa_strdup(oldvd->vdev_path); } newvdpath = spa_strdup(newvd->vdev_path); /* * If this is an in-place replacement, update oldvd's path and devid * to make it distinguishable from newvd, and unopenable from now on. */ if (strcmp(oldvdpath, newvdpath) == 0) { spa_strfree(oldvd->vdev_path); oldvd->vdev_path = kmem_alloc(strlen(newvdpath) + 5, KM_SLEEP); (void) sprintf(oldvd->vdev_path, "%s/old", newvdpath); if (oldvd->vdev_devid != NULL) { spa_strfree(oldvd->vdev_devid); oldvd->vdev_devid = NULL; } spa_strfree(oldvdpath); oldvdpath = spa_strdup(oldvd->vdev_path); } /* * If the parent is not a mirror, or if we're replacing, insert the new * mirror/replacing/spare vdev above oldvd. */ if (!raidz && pvd->vdev_ops != pvops) { pvd = vdev_add_parent(oldvd, pvops); ASSERT(pvd->vdev_ops == pvops); ASSERT(oldvd->vdev_parent == pvd); } ASSERT(pvd->vdev_top->vdev_parent == rvd); /* * Extract the new device from its root and add it to pvd. */ vdev_remove_child(newrootvd, newvd); newvd->vdev_id = pvd->vdev_children; newvd->vdev_crtxg = oldvd->vdev_crtxg; vdev_add_child(pvd, newvd); /* * Reevaluate the parent vdev state. */ vdev_propagate_state(pvd); tvd = newvd->vdev_top; ASSERT(pvd->vdev_top == tvd); ASSERT(tvd->vdev_parent == rvd); vdev_config_dirty(tvd); /* * Set newvd's DTL to [TXG_INITIAL, dtl_max_txg) so that we account * for any dmu_sync-ed blocks. It will propagate upward when * spa_vdev_exit() calls vdev_dtl_reassess(). */ dtl_max_txg = txg + TXG_CONCURRENT_STATES; if (raidz) { /* * Wait for the youngest allocations and frees to sync, * and then wait for the deferral of those frees to finish. */ spa_vdev_config_exit(spa, NULL, txg + TXG_CONCURRENT_STATES + TXG_DEFER_SIZE, 0, FTAG); vdev_initialize_stop_all(tvd, VDEV_INITIALIZE_ACTIVE); vdev_trim_stop_all(tvd, VDEV_TRIM_ACTIVE); vdev_autotrim_stop_wait(tvd); dtl_max_txg = spa_vdev_config_enter(spa); tvd->vdev_rz_expanding = B_TRUE; vdev_dirty_leaves(tvd, VDD_DTL, dtl_max_txg); vdev_config_dirty(tvd); dmu_tx_t *tx = dmu_tx_create_assigned(spa->spa_dsl_pool, dtl_max_txg); dsl_sync_task_nowait(spa->spa_dsl_pool, vdev_raidz_attach_sync, newvd, tx); dmu_tx_commit(tx); } else { vdev_dtl_dirty(newvd, DTL_MISSING, TXG_INITIAL, dtl_max_txg - TXG_INITIAL); if (newvd->vdev_isspare) { spa_spare_activate(newvd); spa_event_notify(spa, newvd, NULL, ESC_ZFS_VDEV_SPARE); } newvd_isspare = newvd->vdev_isspare; /* * Mark newvd's DTL dirty in this txg. */ vdev_dirty(tvd, VDD_DTL, newvd, txg); /* * Schedule the resilver or rebuild to restart in the future. * We do this to ensure that dmu_sync-ed blocks have been * stitched into the respective datasets. */ if (rebuild) { newvd->vdev_rebuild_txg = txg; vdev_rebuild(tvd); } else { newvd->vdev_resilver_txg = txg; if (dsl_scan_resilvering(spa_get_dsl(spa)) && spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER)) { vdev_defer_resilver(newvd); } else { dsl_scan_restart_resilver(spa->spa_dsl_pool, dtl_max_txg); } } } if (spa->spa_bootfs) spa_event_notify(spa, newvd, NULL, ESC_ZFS_BOOTFS_VDEV_ATTACH); spa_event_notify(spa, newvd, NULL, ESC_ZFS_VDEV_ATTACH); /* * Commit the config */ (void) spa_vdev_exit(spa, newrootvd, dtl_max_txg, 0); spa_history_log_internal(spa, "vdev attach", NULL, "%s vdev=%s %s vdev=%s", replacing && newvd_isspare ? "spare in" : replacing ? "replace" : "attach", newvdpath, replacing ? "for" : "to", oldvdpath); spa_strfree(oldvdpath); spa_strfree(newvdpath); return (0); } /* * Detach a device from a mirror or replacing vdev. * * If 'replace_done' is specified, only detach if the parent * is a replacing or a spare vdev. */ int spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid, int replace_done) { uint64_t txg; int error; vdev_t *rvd __maybe_unused = spa->spa_root_vdev; vdev_t *vd, *pvd, *cvd, *tvd; boolean_t unspare = B_FALSE; uint64_t unspare_guid = 0; char *vdpath; ASSERT(spa_writeable(spa)); txg = spa_vdev_detach_enter(spa, guid); vd = spa_lookup_by_guid(spa, guid, B_FALSE); /* * Besides being called directly from the userland through the * ioctl interface, spa_vdev_detach() can be potentially called * at the end of spa_vdev_resilver_done(). * * In the regular case, when we have a checkpoint this shouldn't * happen as we never empty the DTLs of a vdev during the scrub * [see comment in dsl_scan_done()]. Thus spa_vdev_resilvering_done() * should never get here when we have a checkpoint. * * That said, even in a case when we checkpoint the pool exactly * as spa_vdev_resilver_done() calls this function everything * should be fine as the resilver will return right away. */ ASSERT(MUTEX_HELD(&spa_namespace_lock)); if (spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT)) { error = (spa_has_checkpoint(spa)) ? ZFS_ERR_CHECKPOINT_EXISTS : ZFS_ERR_DISCARDING_CHECKPOINT; return (spa_vdev_exit(spa, NULL, txg, error)); } if (vd == NULL) return (spa_vdev_exit(spa, NULL, txg, ENODEV)); if (!vd->vdev_ops->vdev_op_leaf) return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); pvd = vd->vdev_parent; /* * If the parent/child relationship is not as expected, don't do it. * Consider M(A,R(B,C)) -- that is, a mirror of A with a replacing * vdev that's replacing B with C. The user's intent in replacing * is to go from M(A,B) to M(A,C). If the user decides to cancel * the replace by detaching C, the expected behavior is to end up * M(A,B). But suppose that right after deciding to detach C, * the replacement of B completes. We would have M(A,C), and then * ask to detach C, which would leave us with just A -- not what * the user wanted. To prevent this, we make sure that the * parent/child relationship hasn't changed -- in this example, * that C's parent is still the replacing vdev R. */ if (pvd->vdev_guid != pguid && pguid != 0) return (spa_vdev_exit(spa, NULL, txg, EBUSY)); /* * Only 'replacing' or 'spare' vdevs can be replaced. */ if (replace_done && pvd->vdev_ops != &vdev_replacing_ops && pvd->vdev_ops != &vdev_spare_ops) return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); ASSERT(pvd->vdev_ops != &vdev_spare_ops || spa_version(spa) >= SPA_VERSION_SPARES); /* * Only mirror, replacing, and spare vdevs support detach. */ if (pvd->vdev_ops != &vdev_replacing_ops && pvd->vdev_ops != &vdev_mirror_ops && pvd->vdev_ops != &vdev_spare_ops) return (spa_vdev_exit(spa, NULL, txg, ENOTSUP)); /* * If this device has the only valid copy of some data, * we cannot safely detach it. */ if (vdev_dtl_required(vd)) return (spa_vdev_exit(spa, NULL, txg, EBUSY)); ASSERT(pvd->vdev_children >= 2); /* * If we are detaching the second disk from a replacing vdev, then * check to see if we changed the original vdev's path to have "/old" * at the end in spa_vdev_attach(). If so, undo that change now. */ if (pvd->vdev_ops == &vdev_replacing_ops && vd->vdev_id > 0 && vd->vdev_path != NULL) { size_t len = strlen(vd->vdev_path); for (int c = 0; c < pvd->vdev_children; c++) { cvd = pvd->vdev_child[c]; if (cvd == vd || cvd->vdev_path == NULL) continue; if (strncmp(cvd->vdev_path, vd->vdev_path, len) == 0 && strcmp(cvd->vdev_path + len, "/old") == 0) { spa_strfree(cvd->vdev_path); cvd->vdev_path = spa_strdup(vd->vdev_path); break; } } } /* * If we are detaching the original disk from a normal spare, then it * implies that the spare should become a real disk, and be removed * from the active spare list for the pool. dRAID spares on the * other hand are coupled to the pool and thus should never be removed * from the spares list. */ if (pvd->vdev_ops == &vdev_spare_ops && vd->vdev_id == 0) { vdev_t *last_cvd = pvd->vdev_child[pvd->vdev_children - 1]; if (last_cvd->vdev_isspare && last_cvd->vdev_ops != &vdev_draid_spare_ops) { unspare = B_TRUE; } } /* * Erase the disk labels so the disk can be used for other things. * This must be done after all other error cases are handled, * but before we disembowel vd (so we can still do I/O to it). * But if we can't do it, don't treat the error as fatal -- * it may be that the unwritability of the disk is the reason * it's being detached! */ (void) vdev_label_init(vd, 0, VDEV_LABEL_REMOVE); /* * Remove vd from its parent and compact the parent's children. */ vdev_remove_child(pvd, vd); vdev_compact_children(pvd); /* * Remember one of the remaining children so we can get tvd below. */ cvd = pvd->vdev_child[pvd->vdev_children - 1]; /* * If we need to remove the remaining child from the list of hot spares, * do it now, marking the vdev as no longer a spare in the process. * We must do this before vdev_remove_parent(), because that can * change the GUID if it creates a new toplevel GUID. For a similar * reason, we must remove the spare now, in the same txg as the detach; * otherwise someone could attach a new sibling, change the GUID, and * the subsequent attempt to spa_vdev_remove(unspare_guid) would fail. */ if (unspare) { ASSERT(cvd->vdev_isspare); spa_spare_remove(cvd); unspare_guid = cvd->vdev_guid; (void) spa_vdev_remove(spa, unspare_guid, B_TRUE); cvd->vdev_unspare = B_TRUE; } /* * If the parent mirror/replacing vdev only has one child, * the parent is no longer needed. Remove it from the tree. */ if (pvd->vdev_children == 1) { if (pvd->vdev_ops == &vdev_spare_ops) cvd->vdev_unspare = B_FALSE; vdev_remove_parent(cvd); } /* * We don't set tvd until now because the parent we just removed * may have been the previous top-level vdev. */ tvd = cvd->vdev_top; ASSERT(tvd->vdev_parent == rvd); /* * Reevaluate the parent vdev state. */ vdev_propagate_state(cvd); /* * If the 'autoexpand' property is set on the pool then automatically * try to expand the size of the pool. For example if the device we * just detached was smaller than the others, it may be possible to * add metaslabs (i.e. grow the pool). We need to reopen the vdev * first so that we can obtain the updated sizes of the leaf vdevs. */ if (spa->spa_autoexpand) { vdev_reopen(tvd); vdev_expand(tvd, txg); } vdev_config_dirty(tvd); /* * Mark vd's DTL as dirty in this txg. vdev_dtl_sync() will see that * vd->vdev_detached is set and free vd's DTL object in syncing context. * But first make sure we're not on any *other* txg's DTL list, to * prevent vd from being accessed after it's freed. */ vdpath = spa_strdup(vd->vdev_path ? vd->vdev_path : "none"); for (int t = 0; t < TXG_SIZE; t++) (void) txg_list_remove_this(&tvd->vdev_dtl_list, vd, t); vd->vdev_detached = B_TRUE; vdev_dirty(tvd, VDD_DTL, vd, txg); spa_event_notify(spa, vd, NULL, ESC_ZFS_VDEV_REMOVE); spa_notify_waiters(spa); /* hang on to the spa before we release the lock */ spa_open_ref(spa, FTAG); error = spa_vdev_exit(spa, vd, txg, 0); spa_history_log_internal(spa, "detach", NULL, "vdev=%s", vdpath); spa_strfree(vdpath); /* * If this was the removal of the original device in a hot spare vdev, * then we want to go through and remove the device from the hot spare * list of every other pool. */ if (unspare) { spa_t *altspa = NULL; mutex_enter(&spa_namespace_lock); while ((altspa = spa_next(altspa)) != NULL) { if (altspa->spa_state != POOL_STATE_ACTIVE || altspa == spa) continue; spa_open_ref(altspa, FTAG); mutex_exit(&spa_namespace_lock); (void) spa_vdev_remove(altspa, unspare_guid, B_TRUE); mutex_enter(&spa_namespace_lock); spa_close(altspa, FTAG); } mutex_exit(&spa_namespace_lock); /* search the rest of the vdevs for spares to remove */ spa_vdev_resilver_done(spa); } /* all done with the spa; OK to release */ mutex_enter(&spa_namespace_lock); spa_close(spa, FTAG); mutex_exit(&spa_namespace_lock); return (error); } static int spa_vdev_initialize_impl(spa_t *spa, uint64_t guid, uint64_t cmd_type, list_t *vd_list) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER); /* Look up vdev and ensure it's a leaf. */ vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE); if (vd == NULL || vd->vdev_detached) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(ENODEV)); } else if (!vd->vdev_ops->vdev_op_leaf || !vdev_is_concrete(vd)) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EINVAL)); } else if (!vdev_writeable(vd)) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EROFS)); } mutex_enter(&vd->vdev_initialize_lock); spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); /* * When we activate an initialize action we check to see * if the vdev_initialize_thread is NULL. We do this instead * of using the vdev_initialize_state since there might be * a previous initialization process which has completed but * the thread is not exited. */ if (cmd_type == POOL_INITIALIZE_START && (vd->vdev_initialize_thread != NULL || vd->vdev_top->vdev_removing || vd->vdev_top->vdev_rz_expanding)) { mutex_exit(&vd->vdev_initialize_lock); return (SET_ERROR(EBUSY)); } else if (cmd_type == POOL_INITIALIZE_CANCEL && (vd->vdev_initialize_state != VDEV_INITIALIZE_ACTIVE && vd->vdev_initialize_state != VDEV_INITIALIZE_SUSPENDED)) { mutex_exit(&vd->vdev_initialize_lock); return (SET_ERROR(ESRCH)); } else if (cmd_type == POOL_INITIALIZE_SUSPEND && vd->vdev_initialize_state != VDEV_INITIALIZE_ACTIVE) { mutex_exit(&vd->vdev_initialize_lock); return (SET_ERROR(ESRCH)); } else if (cmd_type == POOL_INITIALIZE_UNINIT && vd->vdev_initialize_thread != NULL) { mutex_exit(&vd->vdev_initialize_lock); return (SET_ERROR(EBUSY)); } switch (cmd_type) { case POOL_INITIALIZE_START: vdev_initialize(vd); break; case POOL_INITIALIZE_CANCEL: vdev_initialize_stop(vd, VDEV_INITIALIZE_CANCELED, vd_list); break; case POOL_INITIALIZE_SUSPEND: vdev_initialize_stop(vd, VDEV_INITIALIZE_SUSPENDED, vd_list); break; case POOL_INITIALIZE_UNINIT: vdev_uninitialize(vd); break; default: panic("invalid cmd_type %llu", (unsigned long long)cmd_type); } mutex_exit(&vd->vdev_initialize_lock); return (0); } int spa_vdev_initialize(spa_t *spa, nvlist_t *nv, uint64_t cmd_type, nvlist_t *vdev_errlist) { int total_errors = 0; list_t vd_list; list_create(&vd_list, sizeof (vdev_t), offsetof(vdev_t, vdev_initialize_node)); /* * We hold the namespace lock through the whole function * to prevent any changes to the pool while we're starting or * stopping initialization. The config and state locks are held so that * we can properly assess the vdev state before we commit to * the initializing operation. */ mutex_enter(&spa_namespace_lock); for (nvpair_t *pair = nvlist_next_nvpair(nv, NULL); pair != NULL; pair = nvlist_next_nvpair(nv, pair)) { uint64_t vdev_guid = fnvpair_value_uint64(pair); int error = spa_vdev_initialize_impl(spa, vdev_guid, cmd_type, &vd_list); if (error != 0) { char guid_as_str[MAXNAMELEN]; (void) snprintf(guid_as_str, sizeof (guid_as_str), "%llu", (unsigned long long)vdev_guid); fnvlist_add_int64(vdev_errlist, guid_as_str, error); total_errors++; } } /* Wait for all initialize threads to stop. */ vdev_initialize_stop_wait(spa, &vd_list); /* Sync out the initializing state */ txg_wait_synced(spa->spa_dsl_pool, 0); mutex_exit(&spa_namespace_lock); list_destroy(&vd_list); return (total_errors); } static int spa_vdev_trim_impl(spa_t *spa, uint64_t guid, uint64_t cmd_type, uint64_t rate, boolean_t partial, boolean_t secure, list_t *vd_list) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER); /* Look up vdev and ensure it's a leaf. */ vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE); if (vd == NULL || vd->vdev_detached) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(ENODEV)); } else if (!vd->vdev_ops->vdev_op_leaf || !vdev_is_concrete(vd)) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EINVAL)); } else if (!vdev_writeable(vd)) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EROFS)); } else if (!vd->vdev_has_trim) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EOPNOTSUPP)); } else if (secure && !vd->vdev_has_securetrim) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (SET_ERROR(EOPNOTSUPP)); } mutex_enter(&vd->vdev_trim_lock); spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); /* * When we activate a TRIM action we check to see if the * vdev_trim_thread is NULL. We do this instead of using the * vdev_trim_state since there might be a previous TRIM process * which has completed but the thread is not exited. */ if (cmd_type == POOL_TRIM_START && (vd->vdev_trim_thread != NULL || vd->vdev_top->vdev_removing || vd->vdev_top->vdev_rz_expanding)) { mutex_exit(&vd->vdev_trim_lock); return (SET_ERROR(EBUSY)); } else if (cmd_type == POOL_TRIM_CANCEL && (vd->vdev_trim_state != VDEV_TRIM_ACTIVE && vd->vdev_trim_state != VDEV_TRIM_SUSPENDED)) { mutex_exit(&vd->vdev_trim_lock); return (SET_ERROR(ESRCH)); } else if (cmd_type == POOL_TRIM_SUSPEND && vd->vdev_trim_state != VDEV_TRIM_ACTIVE) { mutex_exit(&vd->vdev_trim_lock); return (SET_ERROR(ESRCH)); } switch (cmd_type) { case POOL_TRIM_START: vdev_trim(vd, rate, partial, secure); break; case POOL_TRIM_CANCEL: vdev_trim_stop(vd, VDEV_TRIM_CANCELED, vd_list); break; case POOL_TRIM_SUSPEND: vdev_trim_stop(vd, VDEV_TRIM_SUSPENDED, vd_list); break; default: panic("invalid cmd_type %llu", (unsigned long long)cmd_type); } mutex_exit(&vd->vdev_trim_lock); return (0); } /* * Initiates a manual TRIM for the requested vdevs. This kicks off individual * TRIM threads for each child vdev. These threads pass over all of the free * space in the vdev's metaslabs and issues TRIM commands for that space. */ int spa_vdev_trim(spa_t *spa, nvlist_t *nv, uint64_t cmd_type, uint64_t rate, boolean_t partial, boolean_t secure, nvlist_t *vdev_errlist) { int total_errors = 0; list_t vd_list; list_create(&vd_list, sizeof (vdev_t), offsetof(vdev_t, vdev_trim_node)); /* * We hold the namespace lock through the whole function * to prevent any changes to the pool while we're starting or * stopping TRIM. The config and state locks are held so that * we can properly assess the vdev state before we commit to * the TRIM operation. */ mutex_enter(&spa_namespace_lock); for (nvpair_t *pair = nvlist_next_nvpair(nv, NULL); pair != NULL; pair = nvlist_next_nvpair(nv, pair)) { uint64_t vdev_guid = fnvpair_value_uint64(pair); int error = spa_vdev_trim_impl(spa, vdev_guid, cmd_type, rate, partial, secure, &vd_list); if (error != 0) { char guid_as_str[MAXNAMELEN]; (void) snprintf(guid_as_str, sizeof (guid_as_str), "%llu", (unsigned long long)vdev_guid); fnvlist_add_int64(vdev_errlist, guid_as_str, error); total_errors++; } } /* Wait for all TRIM threads to stop. */ vdev_trim_stop_wait(spa, &vd_list); /* Sync out the TRIM state */ txg_wait_synced(spa->spa_dsl_pool, 0); mutex_exit(&spa_namespace_lock); list_destroy(&vd_list); return (total_errors); } /* * Split a set of devices from their mirrors, and create a new pool from them. */ int spa_vdev_split_mirror(spa_t *spa, const char *newname, nvlist_t *config, nvlist_t *props, boolean_t exp) { int error = 0; uint64_t txg, *glist; spa_t *newspa; uint_t c, children, lastlog; nvlist_t **child, *nvl, *tmp; dmu_tx_t *tx; const char *altroot = NULL; vdev_t *rvd, **vml = NULL; /* vdev modify list */ boolean_t activate_slog; ASSERT(spa_writeable(spa)); txg = spa_vdev_enter(spa); ASSERT(MUTEX_HELD(&spa_namespace_lock)); if (spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT)) { error = (spa_has_checkpoint(spa)) ? ZFS_ERR_CHECKPOINT_EXISTS : ZFS_ERR_DISCARDING_CHECKPOINT; return (spa_vdev_exit(spa, NULL, txg, error)); } /* clear the log and flush everything up to now */ activate_slog = spa_passivate_log(spa); (void) spa_vdev_config_exit(spa, NULL, txg, 0, FTAG); error = spa_reset_logs(spa); txg = spa_vdev_config_enter(spa); if (activate_slog) spa_activate_log(spa); if (error != 0) return (spa_vdev_exit(spa, NULL, txg, error)); /* check new spa name before going any further */ if (spa_lookup(newname) != NULL) return (spa_vdev_exit(spa, NULL, txg, EEXIST)); /* * scan through all the children to ensure they're all mirrors */ if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvl) != 0 || nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return (spa_vdev_exit(spa, NULL, txg, EINVAL)); /* first, check to ensure we've got the right child count */ rvd = spa->spa_root_vdev; lastlog = 0; for (c = 0; c < rvd->vdev_children; c++) { vdev_t *vd = rvd->vdev_child[c]; /* don't count the holes & logs as children */ if (vd->vdev_islog || (vd->vdev_ops != &vdev_indirect_ops && !vdev_is_concrete(vd))) { if (lastlog == 0) lastlog = c; continue; } lastlog = 0; } if (children != (lastlog != 0 ? lastlog : rvd->vdev_children)) return (spa_vdev_exit(spa, NULL, txg, EINVAL)); /* next, ensure no spare or cache devices are part of the split */ if (nvlist_lookup_nvlist(nvl, ZPOOL_CONFIG_SPARES, &tmp) == 0 || nvlist_lookup_nvlist(nvl, ZPOOL_CONFIG_L2CACHE, &tmp) == 0) return (spa_vdev_exit(spa, NULL, txg, EINVAL)); vml = kmem_zalloc(children * sizeof (vdev_t *), KM_SLEEP); glist = kmem_zalloc(children * sizeof (uint64_t), KM_SLEEP); /* then, loop over each vdev and validate it */ for (c = 0; c < children; c++) { uint64_t is_hole = 0; (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &is_hole); if (is_hole != 0) { if (spa->spa_root_vdev->vdev_child[c]->vdev_ishole || spa->spa_root_vdev->vdev_child[c]->vdev_islog) { continue; } else { error = SET_ERROR(EINVAL); break; } } /* deal with indirect vdevs */ if (spa->spa_root_vdev->vdev_child[c]->vdev_ops == &vdev_indirect_ops) continue; /* which disk is going to be split? */ if (nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_GUID, &glist[c]) != 0) { error = SET_ERROR(EINVAL); break; } /* look it up in the spa */ vml[c] = spa_lookup_by_guid(spa, glist[c], B_FALSE); if (vml[c] == NULL) { error = SET_ERROR(ENODEV); break; } /* make sure there's nothing stopping the split */ if (vml[c]->vdev_parent->vdev_ops != &vdev_mirror_ops || vml[c]->vdev_islog || !vdev_is_concrete(vml[c]) || vml[c]->vdev_isspare || vml[c]->vdev_isl2cache || !vdev_writeable(vml[c]) || vml[c]->vdev_children != 0 || vml[c]->vdev_state != VDEV_STATE_HEALTHY || c != spa->spa_root_vdev->vdev_child[c]->vdev_id) { error = SET_ERROR(EINVAL); break; } if (vdev_dtl_required(vml[c]) || vdev_resilver_needed(vml[c], NULL, NULL)) { error = SET_ERROR(EBUSY); break; } /* we need certain info from the top level */ fnvlist_add_uint64(child[c], ZPOOL_CONFIG_METASLAB_ARRAY, vml[c]->vdev_top->vdev_ms_array); fnvlist_add_uint64(child[c], ZPOOL_CONFIG_METASLAB_SHIFT, vml[c]->vdev_top->vdev_ms_shift); fnvlist_add_uint64(child[c], ZPOOL_CONFIG_ASIZE, vml[c]->vdev_top->vdev_asize); fnvlist_add_uint64(child[c], ZPOOL_CONFIG_ASHIFT, vml[c]->vdev_top->vdev_ashift); /* transfer per-vdev ZAPs */ ASSERT3U(vml[c]->vdev_leaf_zap, !=, 0); VERIFY0(nvlist_add_uint64(child[c], ZPOOL_CONFIG_VDEV_LEAF_ZAP, vml[c]->vdev_leaf_zap)); ASSERT3U(vml[c]->vdev_top->vdev_top_zap, !=, 0); VERIFY0(nvlist_add_uint64(child[c], ZPOOL_CONFIG_VDEV_TOP_ZAP, vml[c]->vdev_parent->vdev_top_zap)); } if (error != 0) { kmem_free(vml, children * sizeof (vdev_t *)); kmem_free(glist, children * sizeof (uint64_t)); return (spa_vdev_exit(spa, NULL, txg, error)); } /* stop writers from using the disks */ for (c = 0; c < children; c++) { if (vml[c] != NULL) vml[c]->vdev_offline = B_TRUE; } vdev_reopen(spa->spa_root_vdev); /* * Temporarily record the splitting vdevs in the spa config. This * will disappear once the config is regenerated. */ nvl = fnvlist_alloc(); fnvlist_add_uint64_array(nvl, ZPOOL_CONFIG_SPLIT_LIST, glist, children); kmem_free(glist, children * sizeof (uint64_t)); mutex_enter(&spa->spa_props_lock); fnvlist_add_nvlist(spa->spa_config, ZPOOL_CONFIG_SPLIT, nvl); mutex_exit(&spa->spa_props_lock); spa->spa_config_splitting = nvl; vdev_config_dirty(spa->spa_root_vdev); /* configure and create the new pool */ fnvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME, newname); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE, exp ? POOL_STATE_EXPORTED : POOL_STATE_ACTIVE); fnvlist_add_uint64(config, ZPOOL_CONFIG_VERSION, spa_version(spa)); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_TXG, spa->spa_config_txg); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_GUID, spa_generate_guid(NULL)); VERIFY0(nvlist_add_boolean(config, ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS)); (void) nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot); /* add the new pool to the namespace */ newspa = spa_add(newname, config, altroot); newspa->spa_avz_action = AVZ_ACTION_REBUILD; newspa->spa_config_txg = spa->spa_config_txg; spa_set_log_state(newspa, SPA_LOG_CLEAR); /* release the spa config lock, retaining the namespace lock */ spa_vdev_config_exit(spa, NULL, txg, 0, FTAG); if (zio_injection_enabled) zio_handle_panic_injection(spa, FTAG, 1); spa_activate(newspa, spa_mode_global); spa_async_suspend(newspa); /* * Temporarily stop the initializing and TRIM activity. We set the * state to ACTIVE so that we know to resume initializing or TRIM * once the split has completed. */ list_t vd_initialize_list; list_create(&vd_initialize_list, sizeof (vdev_t), offsetof(vdev_t, vdev_initialize_node)); list_t vd_trim_list; list_create(&vd_trim_list, sizeof (vdev_t), offsetof(vdev_t, vdev_trim_node)); for (c = 0; c < children; c++) { if (vml[c] != NULL && vml[c]->vdev_ops != &vdev_indirect_ops) { mutex_enter(&vml[c]->vdev_initialize_lock); vdev_initialize_stop(vml[c], VDEV_INITIALIZE_ACTIVE, &vd_initialize_list); mutex_exit(&vml[c]->vdev_initialize_lock); mutex_enter(&vml[c]->vdev_trim_lock); vdev_trim_stop(vml[c], VDEV_TRIM_ACTIVE, &vd_trim_list); mutex_exit(&vml[c]->vdev_trim_lock); } } vdev_initialize_stop_wait(spa, &vd_initialize_list); vdev_trim_stop_wait(spa, &vd_trim_list); list_destroy(&vd_initialize_list); list_destroy(&vd_trim_list); newspa->spa_config_source = SPA_CONFIG_SRC_SPLIT; newspa->spa_is_splitting = B_TRUE; /* create the new pool from the disks of the original pool */ error = spa_load(newspa, SPA_LOAD_IMPORT, SPA_IMPORT_ASSEMBLE); if (error) goto out; /* if that worked, generate a real config for the new pool */ if (newspa->spa_root_vdev != NULL) { newspa->spa_config_splitting = fnvlist_alloc(); fnvlist_add_uint64(newspa->spa_config_splitting, ZPOOL_CONFIG_SPLIT_GUID, spa_guid(spa)); spa_config_set(newspa, spa_config_generate(newspa, NULL, -1ULL, B_TRUE)); } /* set the props */ if (props != NULL) { spa_configfile_set(newspa, props, B_FALSE); error = spa_prop_set(newspa, props); if (error) goto out; } /* flush everything */ txg = spa_vdev_config_enter(newspa); vdev_config_dirty(newspa->spa_root_vdev); (void) spa_vdev_config_exit(newspa, NULL, txg, 0, FTAG); if (zio_injection_enabled) zio_handle_panic_injection(spa, FTAG, 2); spa_async_resume(newspa); /* finally, update the original pool's config */ txg = spa_vdev_config_enter(spa); tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); error = dmu_tx_assign(tx, TXG_WAIT); if (error != 0) dmu_tx_abort(tx); for (c = 0; c < children; c++) { if (vml[c] != NULL && vml[c]->vdev_ops != &vdev_indirect_ops) { vdev_t *tvd = vml[c]->vdev_top; /* * Need to be sure the detachable VDEV is not * on any *other* txg's DTL list to prevent it * from being accessed after it's freed. */ for (int t = 0; t < TXG_SIZE; t++) { (void) txg_list_remove_this( &tvd->vdev_dtl_list, vml[c], t); } vdev_split(vml[c]); if (error == 0) spa_history_log_internal(spa, "detach", tx, "vdev=%s", vml[c]->vdev_path); vdev_free(vml[c]); } } spa->spa_avz_action = AVZ_ACTION_REBUILD; vdev_config_dirty(spa->spa_root_vdev); spa->spa_config_splitting = NULL; nvlist_free(nvl); if (error == 0) dmu_tx_commit(tx); (void) spa_vdev_exit(spa, NULL, txg, 0); if (zio_injection_enabled) zio_handle_panic_injection(spa, FTAG, 3); /* split is complete; log a history record */ spa_history_log_internal(newspa, "split", NULL, "from pool %s", spa_name(spa)); newspa->spa_is_splitting = B_FALSE; kmem_free(vml, children * sizeof (vdev_t *)); /* if we're not going to mount the filesystems in userland, export */ if (exp) error = spa_export_common(newname, POOL_STATE_EXPORTED, NULL, B_FALSE, B_FALSE); return (error); out: spa_unload(newspa); spa_deactivate(newspa); spa_remove(newspa); txg = spa_vdev_config_enter(spa); /* re-online all offlined disks */ for (c = 0; c < children; c++) { if (vml[c] != NULL) vml[c]->vdev_offline = B_FALSE; } /* restart initializing or trimming disks as necessary */ spa_async_request(spa, SPA_ASYNC_INITIALIZE_RESTART); spa_async_request(spa, SPA_ASYNC_TRIM_RESTART); spa_async_request(spa, SPA_ASYNC_AUTOTRIM_RESTART); vdev_reopen(spa->spa_root_vdev); nvlist_free(spa->spa_config_splitting); spa->spa_config_splitting = NULL; (void) spa_vdev_exit(spa, NULL, txg, error); kmem_free(vml, children * sizeof (vdev_t *)); return (error); } /* * Find any device that's done replacing, or a vdev marked 'unspare' that's * currently spared, so we can detach it. */ static vdev_t * spa_vdev_resilver_done_hunt(vdev_t *vd) { vdev_t *newvd, *oldvd; for (int c = 0; c < vd->vdev_children; c++) { oldvd = spa_vdev_resilver_done_hunt(vd->vdev_child[c]); if (oldvd != NULL) return (oldvd); } /* * Check for a completed replacement. We always consider the first * vdev in the list to be the oldest vdev, and the last one to be * the newest (see spa_vdev_attach() for how that works). In * the case where the newest vdev is faulted, we will not automatically * remove it after a resilver completes. This is OK as it will require * user intervention to determine which disk the admin wishes to keep. */ if (vd->vdev_ops == &vdev_replacing_ops) { ASSERT(vd->vdev_children > 1); newvd = vd->vdev_child[vd->vdev_children - 1]; oldvd = vd->vdev_child[0]; if (vdev_dtl_empty(newvd, DTL_MISSING) && vdev_dtl_empty(newvd, DTL_OUTAGE) && !vdev_dtl_required(oldvd)) return (oldvd); } /* * Check for a completed resilver with the 'unspare' flag set. * Also potentially update faulted state. */ if (vd->vdev_ops == &vdev_spare_ops) { vdev_t *first = vd->vdev_child[0]; vdev_t *last = vd->vdev_child[vd->vdev_children - 1]; if (last->vdev_unspare) { oldvd = first; newvd = last; } else if (first->vdev_unspare) { oldvd = last; newvd = first; } else { oldvd = NULL; } if (oldvd != NULL && vdev_dtl_empty(newvd, DTL_MISSING) && vdev_dtl_empty(newvd, DTL_OUTAGE) && !vdev_dtl_required(oldvd)) return (oldvd); vdev_propagate_state(vd); /* * If there are more than two spares attached to a disk, * and those spares are not required, then we want to * attempt to free them up now so that they can be used * by other pools. Once we're back down to a single * disk+spare, we stop removing them. */ if (vd->vdev_children > 2) { newvd = vd->vdev_child[1]; if (newvd->vdev_isspare && last->vdev_isspare && vdev_dtl_empty(last, DTL_MISSING) && vdev_dtl_empty(last, DTL_OUTAGE) && !vdev_dtl_required(newvd)) return (newvd); } } return (NULL); } static void spa_vdev_resilver_done(spa_t *spa) { vdev_t *vd, *pvd, *ppvd; uint64_t guid, sguid, pguid, ppguid; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); while ((vd = spa_vdev_resilver_done_hunt(spa->spa_root_vdev)) != NULL) { pvd = vd->vdev_parent; ppvd = pvd->vdev_parent; guid = vd->vdev_guid; pguid = pvd->vdev_guid; ppguid = ppvd->vdev_guid; sguid = 0; /* * If we have just finished replacing a hot spared device, then * we need to detach the parent's first child (the original hot * spare) as well. */ if (ppvd->vdev_ops == &vdev_spare_ops && pvd->vdev_id == 0 && ppvd->vdev_children == 2) { ASSERT(pvd->vdev_ops == &vdev_replacing_ops); sguid = ppvd->vdev_child[1]->vdev_guid; } ASSERT(vd->vdev_resilver_txg == 0 || !vdev_dtl_required(vd)); spa_config_exit(spa, SCL_ALL, FTAG); if (spa_vdev_detach(spa, guid, pguid, B_TRUE) != 0) return; if (sguid && spa_vdev_detach(spa, sguid, ppguid, B_TRUE) != 0) return; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); } spa_config_exit(spa, SCL_ALL, FTAG); /* * If a detach was not performed above replace waiters will not have * been notified. In which case we must do so now. */ spa_notify_waiters(spa); } /* * Update the stored path or FRU for this vdev. */ static int spa_vdev_set_common(spa_t *spa, uint64_t guid, const char *value, boolean_t ispath) { vdev_t *vd; boolean_t sync = B_FALSE; ASSERT(spa_writeable(spa)); spa_vdev_state_enter(spa, SCL_ALL); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, ENOENT)); if (!vd->vdev_ops->vdev_op_leaf) return (spa_vdev_state_exit(spa, NULL, ENOTSUP)); if (ispath) { if (strcmp(value, vd->vdev_path) != 0) { spa_strfree(vd->vdev_path); vd->vdev_path = spa_strdup(value); sync = B_TRUE; } } else { if (vd->vdev_fru == NULL) { vd->vdev_fru = spa_strdup(value); sync = B_TRUE; } else if (strcmp(value, vd->vdev_fru) != 0) { spa_strfree(vd->vdev_fru); vd->vdev_fru = spa_strdup(value); sync = B_TRUE; } } return (spa_vdev_state_exit(spa, sync ? vd : NULL, 0)); } int spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath) { return (spa_vdev_set_common(spa, guid, newpath, B_TRUE)); } int spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru) { return (spa_vdev_set_common(spa, guid, newfru, B_FALSE)); } /* * ========================================================================== * SPA Scanning * ========================================================================== */ int spa_scrub_pause_resume(spa_t *spa, pool_scrub_cmd_t cmd) { ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0); if (dsl_scan_resilvering(spa->spa_dsl_pool)) return (SET_ERROR(EBUSY)); return (dsl_scrub_set_pause_resume(spa->spa_dsl_pool, cmd)); } int spa_scan_stop(spa_t *spa) { ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0); if (dsl_scan_resilvering(spa->spa_dsl_pool)) return (SET_ERROR(EBUSY)); return (dsl_scan_cancel(spa->spa_dsl_pool)); } int spa_scan(spa_t *spa, pool_scan_func_t func) { ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0); if (func >= POOL_SCAN_FUNCS || func == POOL_SCAN_NONE) return (SET_ERROR(ENOTSUP)); if (func == POOL_SCAN_RESILVER && !spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER)) return (SET_ERROR(ENOTSUP)); /* * If a resilver was requested, but there is no DTL on a * writeable leaf device, we have nothing to do. */ if (func == POOL_SCAN_RESILVER && !vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL)) { spa_async_request(spa, SPA_ASYNC_RESILVER_DONE); return (0); } if (func == POOL_SCAN_ERRORSCRUB && !spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) return (SET_ERROR(ENOTSUP)); return (dsl_scan(spa->spa_dsl_pool, func)); } /* * ========================================================================== * SPA async task processing * ========================================================================== */ static void spa_async_remove(spa_t *spa, vdev_t *vd) { if (vd->vdev_remove_wanted) { vd->vdev_remove_wanted = B_FALSE; vd->vdev_delayed_close = B_FALSE; vdev_set_state(vd, B_FALSE, VDEV_STATE_REMOVED, VDEV_AUX_NONE); /* * We want to clear the stats, but we don't want to do a full * vdev_clear() as that will cause us to throw away * degraded/faulted state as well as attempt to reopen the * device, all of which is a waste. */ vd->vdev_stat.vs_read_errors = 0; vd->vdev_stat.vs_write_errors = 0; vd->vdev_stat.vs_checksum_errors = 0; vdev_state_dirty(vd->vdev_top); /* Tell userspace that the vdev is gone. */ zfs_post_remove(spa, vd); } for (int c = 0; c < vd->vdev_children; c++) spa_async_remove(spa, vd->vdev_child[c]); } static void spa_async_fault_vdev(spa_t *spa, vdev_t *vd) { if (vd->vdev_fault_wanted) { vd->vdev_fault_wanted = B_FALSE; vdev_set_state(vd, B_TRUE, VDEV_STATE_FAULTED, VDEV_AUX_ERR_EXCEEDED); } for (int c = 0; c < vd->vdev_children; c++) spa_async_fault_vdev(spa, vd->vdev_child[c]); } static void spa_async_autoexpand(spa_t *spa, vdev_t *vd) { if (!spa->spa_autoexpand) return; for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; spa_async_autoexpand(spa, cvd); } if (!vd->vdev_ops->vdev_op_leaf || vd->vdev_physpath == NULL) return; spa_event_notify(vd->vdev_spa, vd, NULL, ESC_ZFS_VDEV_AUTOEXPAND); } static __attribute__((noreturn)) void spa_async_thread(void *arg) { spa_t *spa = (spa_t *)arg; dsl_pool_t *dp = spa->spa_dsl_pool; int tasks; ASSERT(spa->spa_sync_on); mutex_enter(&spa->spa_async_lock); tasks = spa->spa_async_tasks; spa->spa_async_tasks = 0; mutex_exit(&spa->spa_async_lock); /* * See if the config needs to be updated. */ if (tasks & SPA_ASYNC_CONFIG_UPDATE) { uint64_t old_space, new_space; mutex_enter(&spa_namespace_lock); old_space = metaslab_class_get_space(spa_normal_class(spa)); old_space += metaslab_class_get_space(spa_special_class(spa)); old_space += metaslab_class_get_space(spa_dedup_class(spa)); old_space += metaslab_class_get_space( spa_embedded_log_class(spa)); spa_config_update(spa, SPA_CONFIG_UPDATE_POOL); new_space = metaslab_class_get_space(spa_normal_class(spa)); new_space += metaslab_class_get_space(spa_special_class(spa)); new_space += metaslab_class_get_space(spa_dedup_class(spa)); new_space += metaslab_class_get_space( spa_embedded_log_class(spa)); mutex_exit(&spa_namespace_lock); /* * If the pool grew as a result of the config update, * then log an internal history event. */ if (new_space != old_space) { spa_history_log_internal(spa, "vdev online", NULL, "pool '%s' size: %llu(+%llu)", spa_name(spa), (u_longlong_t)new_space, (u_longlong_t)(new_space - old_space)); } } /* * See if any devices need to be marked REMOVED. */ if (tasks & SPA_ASYNC_REMOVE) { spa_vdev_state_enter(spa, SCL_NONE); spa_async_remove(spa, spa->spa_root_vdev); for (int i = 0; i < spa->spa_l2cache.sav_count; i++) spa_async_remove(spa, spa->spa_l2cache.sav_vdevs[i]); for (int i = 0; i < spa->spa_spares.sav_count; i++) spa_async_remove(spa, spa->spa_spares.sav_vdevs[i]); (void) spa_vdev_state_exit(spa, NULL, 0); } if ((tasks & SPA_ASYNC_AUTOEXPAND) && !spa_suspended(spa)) { spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); spa_async_autoexpand(spa, spa->spa_root_vdev); spa_config_exit(spa, SCL_CONFIG, FTAG); } /* * See if any devices need to be marked faulted. */ if (tasks & SPA_ASYNC_FAULT_VDEV) { spa_vdev_state_enter(spa, SCL_NONE); spa_async_fault_vdev(spa, spa->spa_root_vdev); (void) spa_vdev_state_exit(spa, NULL, 0); } /* * If any devices are done replacing, detach them. */ if (tasks & SPA_ASYNC_RESILVER_DONE || tasks & SPA_ASYNC_REBUILD_DONE || tasks & SPA_ASYNC_DETACH_SPARE) { spa_vdev_resilver_done(spa); } /* * Kick off a resilver. */ if (tasks & SPA_ASYNC_RESILVER && !vdev_rebuild_active(spa->spa_root_vdev) && (!dsl_scan_resilvering(dp) || !spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_RESILVER_DEFER))) dsl_scan_restart_resilver(dp, 0); if (tasks & SPA_ASYNC_INITIALIZE_RESTART) { mutex_enter(&spa_namespace_lock); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_initialize_restart(spa->spa_root_vdev); spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_exit(&spa_namespace_lock); } if (tasks & SPA_ASYNC_TRIM_RESTART) { mutex_enter(&spa_namespace_lock); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_trim_restart(spa->spa_root_vdev); spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_exit(&spa_namespace_lock); } if (tasks & SPA_ASYNC_AUTOTRIM_RESTART) { mutex_enter(&spa_namespace_lock); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_autotrim_restart(spa); spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_exit(&spa_namespace_lock); } /* * Kick off L2 cache whole device TRIM. */ if (tasks & SPA_ASYNC_L2CACHE_TRIM) { mutex_enter(&spa_namespace_lock); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_trim_l2arc(spa); spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_exit(&spa_namespace_lock); } /* * Kick off L2 cache rebuilding. */ if (tasks & SPA_ASYNC_L2CACHE_REBUILD) { mutex_enter(&spa_namespace_lock); spa_config_enter(spa, SCL_L2ARC, FTAG, RW_READER); l2arc_spa_rebuild_start(spa); spa_config_exit(spa, SCL_L2ARC, FTAG); mutex_exit(&spa_namespace_lock); } /* * Let the world know that we're done. */ mutex_enter(&spa->spa_async_lock); spa->spa_async_thread = NULL; cv_broadcast(&spa->spa_async_cv); mutex_exit(&spa->spa_async_lock); thread_exit(); } void spa_async_suspend(spa_t *spa) { mutex_enter(&spa->spa_async_lock); spa->spa_async_suspended++; while (spa->spa_async_thread != NULL) cv_wait(&spa->spa_async_cv, &spa->spa_async_lock); mutex_exit(&spa->spa_async_lock); spa_vdev_remove_suspend(spa); zthr_t *condense_thread = spa->spa_condense_zthr; if (condense_thread != NULL) zthr_cancel(condense_thread); zthr_t *raidz_expand_thread = spa->spa_raidz_expand_zthr; if (raidz_expand_thread != NULL) zthr_cancel(raidz_expand_thread); zthr_t *discard_thread = spa->spa_checkpoint_discard_zthr; if (discard_thread != NULL) zthr_cancel(discard_thread); zthr_t *ll_delete_thread = spa->spa_livelist_delete_zthr; if (ll_delete_thread != NULL) zthr_cancel(ll_delete_thread); zthr_t *ll_condense_thread = spa->spa_livelist_condense_zthr; if (ll_condense_thread != NULL) zthr_cancel(ll_condense_thread); } void spa_async_resume(spa_t *spa) { mutex_enter(&spa->spa_async_lock); ASSERT(spa->spa_async_suspended != 0); spa->spa_async_suspended--; mutex_exit(&spa->spa_async_lock); spa_restart_removal(spa); zthr_t *condense_thread = spa->spa_condense_zthr; if (condense_thread != NULL) zthr_resume(condense_thread); zthr_t *raidz_expand_thread = spa->spa_raidz_expand_zthr; if (raidz_expand_thread != NULL) zthr_resume(raidz_expand_thread); zthr_t *discard_thread = spa->spa_checkpoint_discard_zthr; if (discard_thread != NULL) zthr_resume(discard_thread); zthr_t *ll_delete_thread = spa->spa_livelist_delete_zthr; if (ll_delete_thread != NULL) zthr_resume(ll_delete_thread); zthr_t *ll_condense_thread = spa->spa_livelist_condense_zthr; if (ll_condense_thread != NULL) zthr_resume(ll_condense_thread); } static boolean_t spa_async_tasks_pending(spa_t *spa) { uint_t non_config_tasks; uint_t config_task; boolean_t config_task_suspended; non_config_tasks = spa->spa_async_tasks & ~SPA_ASYNC_CONFIG_UPDATE; config_task = spa->spa_async_tasks & SPA_ASYNC_CONFIG_UPDATE; if (spa->spa_ccw_fail_time == 0) { config_task_suspended = B_FALSE; } else { config_task_suspended = (gethrtime() - spa->spa_ccw_fail_time) < ((hrtime_t)zfs_ccw_retry_interval * NANOSEC); } return (non_config_tasks || (config_task && !config_task_suspended)); } static void spa_async_dispatch(spa_t *spa) { mutex_enter(&spa->spa_async_lock); if (spa_async_tasks_pending(spa) && !spa->spa_async_suspended && spa->spa_async_thread == NULL) spa->spa_async_thread = thread_create(NULL, 0, spa_async_thread, spa, 0, &p0, TS_RUN, maxclsyspri); mutex_exit(&spa->spa_async_lock); } void spa_async_request(spa_t *spa, int task) { zfs_dbgmsg("spa=%s async request task=%u", spa->spa_name, task); mutex_enter(&spa->spa_async_lock); spa->spa_async_tasks |= task; mutex_exit(&spa->spa_async_lock); } int spa_async_tasks(spa_t *spa) { return (spa->spa_async_tasks); } /* * ========================================================================== * SPA syncing routines * ========================================================================== */ static int bpobj_enqueue_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed, dmu_tx_t *tx) { bpobj_t *bpo = arg; bpobj_enqueue(bpo, bp, bp_freed, tx); return (0); } int bpobj_enqueue_alloc_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx) { return (bpobj_enqueue_cb(arg, bp, B_FALSE, tx)); } int bpobj_enqueue_free_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx) { return (bpobj_enqueue_cb(arg, bp, B_TRUE, tx)); } static int spa_free_sync_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx) { zio_t *pio = arg; zio_nowait(zio_free_sync(pio, pio->io_spa, dmu_tx_get_txg(tx), bp, pio->io_flags)); return (0); } static int bpobj_spa_free_sync_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed, dmu_tx_t *tx) { ASSERT(!bp_freed); return (spa_free_sync_cb(arg, bp, tx)); } /* * Note: this simple function is not inlined to make it easier to dtrace the * amount of time spent syncing frees. */ static void spa_sync_frees(spa_t *spa, bplist_t *bpl, dmu_tx_t *tx) { zio_t *zio = zio_root(spa, NULL, NULL, 0); bplist_iterate(bpl, spa_free_sync_cb, zio, tx); VERIFY(zio_wait(zio) == 0); } /* * Note: this simple function is not inlined to make it easier to dtrace the * amount of time spent syncing deferred frees. */ static void spa_sync_deferred_frees(spa_t *spa, dmu_tx_t *tx) { if (spa_sync_pass(spa) != 1) return; /* * Note: * If the log space map feature is active, we stop deferring * frees to the next TXG and therefore running this function * would be considered a no-op as spa_deferred_bpobj should * not have any entries. * * That said we run this function anyway (instead of returning * immediately) for the edge-case scenario where we just * activated the log space map feature in this TXG but we have * deferred frees from the previous TXG. */ zio_t *zio = zio_root(spa, NULL, NULL, 0); VERIFY3U(bpobj_iterate(&spa->spa_deferred_bpobj, bpobj_spa_free_sync_cb, zio, tx), ==, 0); VERIFY0(zio_wait(zio)); } static void spa_sync_nvlist(spa_t *spa, uint64_t obj, nvlist_t *nv, dmu_tx_t *tx) { char *packed = NULL; size_t bufsize; size_t nvsize = 0; dmu_buf_t *db; VERIFY(nvlist_size(nv, &nvsize, NV_ENCODE_XDR) == 0); /* * Write full (SPA_CONFIG_BLOCKSIZE) blocks of configuration * information. This avoids the dmu_buf_will_dirty() path and * saves us a pre-read to get data we don't actually care about. */ bufsize = P2ROUNDUP((uint64_t)nvsize, SPA_CONFIG_BLOCKSIZE); packed = vmem_alloc(bufsize, KM_SLEEP); VERIFY(nvlist_pack(nv, &packed, &nvsize, NV_ENCODE_XDR, KM_SLEEP) == 0); memset(packed + nvsize, 0, bufsize - nvsize); dmu_write(spa->spa_meta_objset, obj, 0, bufsize, packed, tx); vmem_free(packed, bufsize); VERIFY(0 == dmu_bonus_hold(spa->spa_meta_objset, obj, FTAG, &db)); dmu_buf_will_dirty(db, tx); *(uint64_t *)db->db_data = nvsize; dmu_buf_rele(db, FTAG); } static void spa_sync_aux_dev(spa_t *spa, spa_aux_vdev_t *sav, dmu_tx_t *tx, const char *config, const char *entry) { nvlist_t *nvroot; nvlist_t **list; int i; if (!sav->sav_sync) return; /* * Update the MOS nvlist describing the list of available devices. * spa_validate_aux() will have already made sure this nvlist is * valid and the vdevs are labeled appropriately. */ if (sav->sav_object == 0) { sav->sav_object = dmu_object_alloc(spa->spa_meta_objset, DMU_OT_PACKED_NVLIST, 1 << 14, DMU_OT_PACKED_NVLIST_SIZE, sizeof (uint64_t), tx); VERIFY(zap_update(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, entry, sizeof (uint64_t), 1, &sav->sav_object, tx) == 0); } nvroot = fnvlist_alloc(); if (sav->sav_count == 0) { fnvlist_add_nvlist_array(nvroot, config, (const nvlist_t * const *)NULL, 0); } else { list = kmem_alloc(sav->sav_count*sizeof (void *), KM_SLEEP); for (i = 0; i < sav->sav_count; i++) list[i] = vdev_config_generate(spa, sav->sav_vdevs[i], B_FALSE, VDEV_CONFIG_L2CACHE); fnvlist_add_nvlist_array(nvroot, config, (const nvlist_t * const *)list, sav->sav_count); for (i = 0; i < sav->sav_count; i++) nvlist_free(list[i]); kmem_free(list, sav->sav_count * sizeof (void *)); } spa_sync_nvlist(spa, sav->sav_object, nvroot, tx); nvlist_free(nvroot); sav->sav_sync = B_FALSE; } /* * Rebuild spa's all-vdev ZAP from the vdev ZAPs indicated in each vdev_t. * The all-vdev ZAP must be empty. */ static void spa_avz_build(vdev_t *vd, uint64_t avz, dmu_tx_t *tx) { spa_t *spa = vd->vdev_spa; if (vd->vdev_root_zap != 0 && spa_feature_is_active(spa, SPA_FEATURE_AVZ_V2)) { VERIFY0(zap_add_int(spa->spa_meta_objset, avz, vd->vdev_root_zap, tx)); } if (vd->vdev_top_zap != 0) { VERIFY0(zap_add_int(spa->spa_meta_objset, avz, vd->vdev_top_zap, tx)); } if (vd->vdev_leaf_zap != 0) { VERIFY0(zap_add_int(spa->spa_meta_objset, avz, vd->vdev_leaf_zap, tx)); } for (uint64_t i = 0; i < vd->vdev_children; i++) { spa_avz_build(vd->vdev_child[i], avz, tx); } } static void spa_sync_config_object(spa_t *spa, dmu_tx_t *tx) { nvlist_t *config; /* * If the pool is being imported from a pre-per-vdev-ZAP version of ZFS, * its config may not be dirty but we still need to build per-vdev ZAPs. * Similarly, if the pool is being assembled (e.g. after a split), we * need to rebuild the AVZ although the config may not be dirty. */ if (list_is_empty(&spa->spa_config_dirty_list) && spa->spa_avz_action == AVZ_ACTION_NONE) return; spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); ASSERT(spa->spa_avz_action == AVZ_ACTION_NONE || spa->spa_avz_action == AVZ_ACTION_INITIALIZE || spa->spa_all_vdev_zaps != 0); if (spa->spa_avz_action == AVZ_ACTION_REBUILD) { /* Make and build the new AVZ */ uint64_t new_avz = zap_create(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_OT_NONE, 0, tx); spa_avz_build(spa->spa_root_vdev, new_avz, tx); /* Diff old AVZ with new one */ zap_cursor_t zc; zap_attribute_t za; for (zap_cursor_init(&zc, spa->spa_meta_objset, spa->spa_all_vdev_zaps); zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) { uint64_t vdzap = za.za_first_integer; if (zap_lookup_int(spa->spa_meta_objset, new_avz, vdzap) == ENOENT) { /* * ZAP is listed in old AVZ but not in new one; * destroy it */ VERIFY0(zap_destroy(spa->spa_meta_objset, vdzap, tx)); } } zap_cursor_fini(&zc); /* Destroy the old AVZ */ VERIFY0(zap_destroy(spa->spa_meta_objset, spa->spa_all_vdev_zaps, tx)); /* Replace the old AVZ in the dir obj with the new one */ VERIFY0(zap_update(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_VDEV_ZAP_MAP, sizeof (new_avz), 1, &new_avz, tx)); spa->spa_all_vdev_zaps = new_avz; } else if (spa->spa_avz_action == AVZ_ACTION_DESTROY) { zap_cursor_t zc; zap_attribute_t za; /* Walk through the AVZ and destroy all listed ZAPs */ for (zap_cursor_init(&zc, spa->spa_meta_objset, spa->spa_all_vdev_zaps); zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) { uint64_t zap = za.za_first_integer; VERIFY0(zap_destroy(spa->spa_meta_objset, zap, tx)); } zap_cursor_fini(&zc); /* Destroy and unlink the AVZ itself */ VERIFY0(zap_destroy(spa->spa_meta_objset, spa->spa_all_vdev_zaps, tx)); VERIFY0(zap_remove(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_VDEV_ZAP_MAP, tx)); spa->spa_all_vdev_zaps = 0; } if (spa->spa_all_vdev_zaps == 0) { spa->spa_all_vdev_zaps = zap_create_link(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_VDEV_ZAP_MAP, tx); } spa->spa_avz_action = AVZ_ACTION_NONE; /* Create ZAPs for vdevs that don't have them. */ vdev_construct_zaps(spa->spa_root_vdev, tx); config = spa_config_generate(spa, spa->spa_root_vdev, dmu_tx_get_txg(tx), B_FALSE); /* * If we're upgrading the spa version then make sure that * the config object gets updated with the correct version. */ if (spa->spa_ubsync.ub_version < spa->spa_uberblock.ub_version) fnvlist_add_uint64(config, ZPOOL_CONFIG_VERSION, spa->spa_uberblock.ub_version); spa_config_exit(spa, SCL_STATE, FTAG); nvlist_free(spa->spa_config_syncing); spa->spa_config_syncing = config; spa_sync_nvlist(spa, spa->spa_config_object, config, tx); } static void spa_sync_version(void *arg, dmu_tx_t *tx) { uint64_t *versionp = arg; uint64_t version = *versionp; spa_t *spa = dmu_tx_pool(tx)->dp_spa; /* * Setting the version is special cased when first creating the pool. */ ASSERT(tx->tx_txg != TXG_INITIAL); ASSERT(SPA_VERSION_IS_SUPPORTED(version)); ASSERT(version >= spa_version(spa)); spa->spa_uberblock.ub_version = version; vdev_config_dirty(spa->spa_root_vdev); spa_history_log_internal(spa, "set", tx, "version=%lld", (longlong_t)version); } /* * Set zpool properties. */ static void spa_sync_props(void *arg, dmu_tx_t *tx) { nvlist_t *nvp = arg; spa_t *spa = dmu_tx_pool(tx)->dp_spa; objset_t *mos = spa->spa_meta_objset; nvpair_t *elem = NULL; mutex_enter(&spa->spa_props_lock); while ((elem = nvlist_next_nvpair(nvp, elem))) { uint64_t intval; const char *strval, *fname; zpool_prop_t prop; const char *propname; const char *elemname = nvpair_name(elem); zprop_type_t proptype; spa_feature_t fid; switch (prop = zpool_name_to_prop(elemname)) { case ZPOOL_PROP_VERSION: intval = fnvpair_value_uint64(elem); /* * The version is synced separately before other * properties and should be correct by now. */ ASSERT3U(spa_version(spa), >=, intval); break; case ZPOOL_PROP_ALTROOT: /* * 'altroot' is a non-persistent property. It should * have been set temporarily at creation or import time. */ ASSERT(spa->spa_root != NULL); break; case ZPOOL_PROP_READONLY: case ZPOOL_PROP_CACHEFILE: /* * 'readonly' and 'cachefile' are also non-persistent * properties. */ break; case ZPOOL_PROP_COMMENT: strval = fnvpair_value_string(elem); if (spa->spa_comment != NULL) spa_strfree(spa->spa_comment); spa->spa_comment = spa_strdup(strval); /* * We need to dirty the configuration on all the vdevs * so that their labels get updated. We also need to * update the cache file to keep it in sync with the * MOS version. It's unnecessary to do this for pool * creation since the vdev's configuration has already * been dirtied. */ if (tx->tx_txg != TXG_INITIAL) { vdev_config_dirty(spa->spa_root_vdev); spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE); } spa_history_log_internal(spa, "set", tx, "%s=%s", elemname, strval); break; case ZPOOL_PROP_COMPATIBILITY: strval = fnvpair_value_string(elem); if (spa->spa_compatibility != NULL) spa_strfree(spa->spa_compatibility); spa->spa_compatibility = spa_strdup(strval); /* * Dirty the configuration on vdevs as above. */ if (tx->tx_txg != TXG_INITIAL) { vdev_config_dirty(spa->spa_root_vdev); spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE); } spa_history_log_internal(spa, "set", tx, "%s=%s", nvpair_name(elem), strval); break; case ZPOOL_PROP_INVAL: if (zpool_prop_feature(elemname)) { fname = strchr(elemname, '@') + 1; VERIFY0(zfeature_lookup_name(fname, &fid)); spa_feature_enable(spa, fid, tx); spa_history_log_internal(spa, "set", tx, "%s=enabled", elemname); break; } else if (!zfs_prop_user(elemname)) { ASSERT(zpool_prop_feature(elemname)); break; } zfs_fallthrough; default: /* * Set pool property values in the poolprops mos object. */ if (spa->spa_pool_props_object == 0) { spa->spa_pool_props_object = zap_create_link(mos, DMU_OT_POOL_PROPS, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_PROPS, tx); } /* normalize the property name */ if (prop == ZPOOL_PROP_INVAL) { propname = elemname; proptype = PROP_TYPE_STRING; } else { propname = zpool_prop_to_name(prop); proptype = zpool_prop_get_type(prop); } if (nvpair_type(elem) == DATA_TYPE_STRING) { ASSERT(proptype == PROP_TYPE_STRING); strval = fnvpair_value_string(elem); VERIFY0(zap_update(mos, spa->spa_pool_props_object, propname, 1, strlen(strval) + 1, strval, tx)); spa_history_log_internal(spa, "set", tx, "%s=%s", elemname, strval); } else if (nvpair_type(elem) == DATA_TYPE_UINT64) { intval = fnvpair_value_uint64(elem); if (proptype == PROP_TYPE_INDEX) { const char *unused; VERIFY0(zpool_prop_index_to_string( prop, intval, &unused)); } VERIFY0(zap_update(mos, spa->spa_pool_props_object, propname, 8, 1, &intval, tx)); spa_history_log_internal(spa, "set", tx, "%s=%lld", elemname, (longlong_t)intval); switch (prop) { case ZPOOL_PROP_DELEGATION: spa->spa_delegation = intval; break; case ZPOOL_PROP_BOOTFS: spa->spa_bootfs = intval; break; case ZPOOL_PROP_FAILUREMODE: spa->spa_failmode = intval; break; case ZPOOL_PROP_AUTOTRIM: spa->spa_autotrim = intval; spa_async_request(spa, SPA_ASYNC_AUTOTRIM_RESTART); break; case ZPOOL_PROP_AUTOEXPAND: spa->spa_autoexpand = intval; if (tx->tx_txg != TXG_INITIAL) spa_async_request(spa, SPA_ASYNC_AUTOEXPAND); break; case ZPOOL_PROP_MULTIHOST: spa->spa_multihost = intval; break; + case ZPOOL_PROP_DEDUP_TABLE_QUOTA: + spa->spa_dedup_table_quota = intval; + break; default: break; } } else { ASSERT(0); /* not allowed */ } } } mutex_exit(&spa->spa_props_lock); } /* * Perform one-time upgrade on-disk changes. spa_version() does not * reflect the new version this txg, so there must be no changes this * txg to anything that the upgrade code depends on after it executes. * Therefore this must be called after dsl_pool_sync() does the sync * tasks. */ static void spa_sync_upgrades(spa_t *spa, dmu_tx_t *tx) { if (spa_sync_pass(spa) != 1) return; dsl_pool_t *dp = spa->spa_dsl_pool; rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); if (spa->spa_ubsync.ub_version < SPA_VERSION_ORIGIN && spa->spa_uberblock.ub_version >= SPA_VERSION_ORIGIN) { dsl_pool_create_origin(dp, tx); /* Keeping the origin open increases spa_minref */ spa->spa_minref += 3; } if (spa->spa_ubsync.ub_version < SPA_VERSION_NEXT_CLONES && spa->spa_uberblock.ub_version >= SPA_VERSION_NEXT_CLONES) { dsl_pool_upgrade_clones(dp, tx); } if (spa->spa_ubsync.ub_version < SPA_VERSION_DIR_CLONES && spa->spa_uberblock.ub_version >= SPA_VERSION_DIR_CLONES) { dsl_pool_upgrade_dir_clones(dp, tx); /* Keeping the freedir open increases spa_minref */ spa->spa_minref += 3; } if (spa->spa_ubsync.ub_version < SPA_VERSION_FEATURES && spa->spa_uberblock.ub_version >= SPA_VERSION_FEATURES) { spa_feature_create_zap_objects(spa, tx); } /* * LZ4_COMPRESS feature's behaviour was changed to activate_on_enable * when possibility to use lz4 compression for metadata was added * Old pools that have this feature enabled must be upgraded to have * this feature active */ if (spa->spa_uberblock.ub_version >= SPA_VERSION_FEATURES) { boolean_t lz4_en = spa_feature_is_enabled(spa, SPA_FEATURE_LZ4_COMPRESS); boolean_t lz4_ac = spa_feature_is_active(spa, SPA_FEATURE_LZ4_COMPRESS); if (lz4_en && !lz4_ac) spa_feature_incr(spa, SPA_FEATURE_LZ4_COMPRESS, tx); } /* * If we haven't written the salt, do so now. Note that the * feature may not be activated yet, but that's fine since * the presence of this ZAP entry is backwards compatible. */ if (zap_contains(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CHECKSUM_SALT) == ENOENT) { VERIFY0(zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CHECKSUM_SALT, 1, sizeof (spa->spa_cksum_salt.zcs_bytes), spa->spa_cksum_salt.zcs_bytes, tx)); } rrw_exit(&dp->dp_config_rwlock, FTAG); } static void vdev_indirect_state_sync_verify(vdev_t *vd) { vdev_indirect_mapping_t *vim __maybe_unused = vd->vdev_indirect_mapping; vdev_indirect_births_t *vib __maybe_unused = vd->vdev_indirect_births; if (vd->vdev_ops == &vdev_indirect_ops) { ASSERT(vim != NULL); ASSERT(vib != NULL); } uint64_t obsolete_sm_object = 0; ASSERT0(vdev_obsolete_sm_object(vd, &obsolete_sm_object)); if (obsolete_sm_object != 0) { ASSERT(vd->vdev_obsolete_sm != NULL); ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops); ASSERT(vdev_indirect_mapping_num_entries(vim) > 0); ASSERT(vdev_indirect_mapping_bytes_mapped(vim) > 0); ASSERT3U(obsolete_sm_object, ==, space_map_object(vd->vdev_obsolete_sm)); ASSERT3U(vdev_indirect_mapping_bytes_mapped(vim), >=, space_map_allocated(vd->vdev_obsolete_sm)); } ASSERT(vd->vdev_obsolete_segments != NULL); /* * Since frees / remaps to an indirect vdev can only * happen in syncing context, the obsolete segments * tree must be empty when we start syncing. */ ASSERT0(range_tree_space(vd->vdev_obsolete_segments)); } /* * Set the top-level vdev's max queue depth. Evaluate each top-level's * async write queue depth in case it changed. The max queue depth will * not change in the middle of syncing out this txg. */ static void spa_sync_adjust_vdev_max_queue_depth(spa_t *spa) { ASSERT(spa_writeable(spa)); vdev_t *rvd = spa->spa_root_vdev; uint32_t max_queue_depth = zfs_vdev_async_write_max_active * zfs_vdev_queue_depth_pct / 100; metaslab_class_t *normal = spa_normal_class(spa); metaslab_class_t *special = spa_special_class(spa); metaslab_class_t *dedup = spa_dedup_class(spa); uint64_t slots_per_allocator = 0; for (int c = 0; c < rvd->vdev_children; c++) { vdev_t *tvd = rvd->vdev_child[c]; metaslab_group_t *mg = tvd->vdev_mg; if (mg == NULL || !metaslab_group_initialized(mg)) continue; metaslab_class_t *mc = mg->mg_class; if (mc != normal && mc != special && mc != dedup) continue; /* * It is safe to do a lock-free check here because only async * allocations look at mg_max_alloc_queue_depth, and async * allocations all happen from spa_sync(). */ for (int i = 0; i < mg->mg_allocators; i++) { ASSERT0(zfs_refcount_count( &(mg->mg_allocator[i].mga_alloc_queue_depth))); } mg->mg_max_alloc_queue_depth = max_queue_depth; for (int i = 0; i < mg->mg_allocators; i++) { mg->mg_allocator[i].mga_cur_max_alloc_queue_depth = zfs_vdev_def_queue_depth; } slots_per_allocator += zfs_vdev_def_queue_depth; } for (int i = 0; i < spa->spa_alloc_count; i++) { ASSERT0(zfs_refcount_count(&normal->mc_allocator[i]. mca_alloc_slots)); ASSERT0(zfs_refcount_count(&special->mc_allocator[i]. mca_alloc_slots)); ASSERT0(zfs_refcount_count(&dedup->mc_allocator[i]. mca_alloc_slots)); normal->mc_allocator[i].mca_alloc_max_slots = slots_per_allocator; special->mc_allocator[i].mca_alloc_max_slots = slots_per_allocator; dedup->mc_allocator[i].mca_alloc_max_slots = slots_per_allocator; } normal->mc_alloc_throttle_enabled = zio_dva_throttle_enabled; special->mc_alloc_throttle_enabled = zio_dva_throttle_enabled; dedup->mc_alloc_throttle_enabled = zio_dva_throttle_enabled; } static void spa_sync_condense_indirect(spa_t *spa, dmu_tx_t *tx) { ASSERT(spa_writeable(spa)); vdev_t *rvd = spa->spa_root_vdev; for (int c = 0; c < rvd->vdev_children; c++) { vdev_t *vd = rvd->vdev_child[c]; vdev_indirect_state_sync_verify(vd); if (vdev_indirect_should_condense(vd)) { spa_condense_indirect_start_sync(vd, tx); break; } } } static void spa_sync_iterate_to_convergence(spa_t *spa, dmu_tx_t *tx) { objset_t *mos = spa->spa_meta_objset; dsl_pool_t *dp = spa->spa_dsl_pool; uint64_t txg = tx->tx_txg; bplist_t *free_bpl = &spa->spa_free_bplist[txg & TXG_MASK]; do { int pass = ++spa->spa_sync_pass; spa_sync_config_object(spa, tx); spa_sync_aux_dev(spa, &spa->spa_spares, tx, ZPOOL_CONFIG_SPARES, DMU_POOL_SPARES); spa_sync_aux_dev(spa, &spa->spa_l2cache, tx, ZPOOL_CONFIG_L2CACHE, DMU_POOL_L2CACHE); spa_errlog_sync(spa, txg); dsl_pool_sync(dp, txg); if (pass < zfs_sync_pass_deferred_free || spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP)) { /* * If the log space map feature is active we don't * care about deferred frees and the deferred bpobj * as the log space map should effectively have the * same results (i.e. appending only to one object). */ spa_sync_frees(spa, free_bpl, tx); } else { /* * We can not defer frees in pass 1, because * we sync the deferred frees later in pass 1. */ ASSERT3U(pass, >, 1); bplist_iterate(free_bpl, bpobj_enqueue_alloc_cb, &spa->spa_deferred_bpobj, tx); } brt_sync(spa, txg); ddt_sync(spa, txg); dsl_scan_sync(dp, tx); dsl_errorscrub_sync(dp, tx); svr_sync(spa, tx); spa_sync_upgrades(spa, tx); spa_flush_metaslabs(spa, tx); vdev_t *vd = NULL; while ((vd = txg_list_remove(&spa->spa_vdev_txg_list, txg)) != NULL) vdev_sync(vd, txg); if (pass == 1) { /* * dsl_pool_sync() -> dp_sync_tasks may have dirtied * the config. If that happens, this txg should not * be a no-op. So we must sync the config to the MOS * before checking for no-op. * * Note that when the config is dirty, it will * be written to the MOS (i.e. the MOS will be * dirtied) every time we call spa_sync_config_object() * in this txg. Therefore we can't call this after * dsl_pool_sync() every pass, because it would * prevent us from converging, since we'd dirty * the MOS every pass. * * Sync tasks can only be processed in pass 1, so * there's no need to do this in later passes. */ spa_sync_config_object(spa, tx); } /* * Note: We need to check if the MOS is dirty because we could * have marked the MOS dirty without updating the uberblock * (e.g. if we have sync tasks but no dirty user data). We need * to check the uberblock's rootbp because it is updated if we * have synced out dirty data (though in this case the MOS will * most likely also be dirty due to second order effects, we * don't want to rely on that here). */ if (pass == 1 && BP_GET_LOGICAL_BIRTH(&spa->spa_uberblock.ub_rootbp) < txg && !dmu_objset_is_dirty(mos, txg)) { /* * Nothing changed on the first pass, therefore this * TXG is a no-op. Avoid syncing deferred frees, so * that we can keep this TXG as a no-op. */ ASSERT(txg_list_empty(&dp->dp_dirty_datasets, txg)); ASSERT(txg_list_empty(&dp->dp_dirty_dirs, txg)); ASSERT(txg_list_empty(&dp->dp_sync_tasks, txg)); ASSERT(txg_list_empty(&dp->dp_early_sync_tasks, txg)); break; } spa_sync_deferred_frees(spa, tx); } while (dmu_objset_is_dirty(mos, txg)); } /* * Rewrite the vdev configuration (which includes the uberblock) to * commit the transaction group. * * If there are no dirty vdevs, we sync the uberblock to a few random * top-level vdevs that are known to be visible in the config cache * (see spa_vdev_add() for a complete description). If there *are* dirty * vdevs, sync the uberblock to all vdevs. */ static void spa_sync_rewrite_vdev_config(spa_t *spa, dmu_tx_t *tx) { vdev_t *rvd = spa->spa_root_vdev; uint64_t txg = tx->tx_txg; for (;;) { int error = 0; /* * We hold SCL_STATE to prevent vdev open/close/etc. * while we're attempting to write the vdev labels. */ spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); if (list_is_empty(&spa->spa_config_dirty_list)) { vdev_t *svd[SPA_SYNC_MIN_VDEVS] = { NULL }; int svdcount = 0; int children = rvd->vdev_children; int c0 = random_in_range(children); for (int c = 0; c < children; c++) { vdev_t *vd = rvd->vdev_child[(c0 + c) % children]; /* Stop when revisiting the first vdev */ if (c > 0 && svd[0] == vd) break; if (vd->vdev_ms_array == 0 || vd->vdev_islog || !vdev_is_concrete(vd)) continue; svd[svdcount++] = vd; if (svdcount == SPA_SYNC_MIN_VDEVS) break; } error = vdev_config_sync(svd, svdcount, txg); } else { error = vdev_config_sync(rvd->vdev_child, rvd->vdev_children, txg); } if (error == 0) spa->spa_last_synced_guid = rvd->vdev_guid; spa_config_exit(spa, SCL_STATE, FTAG); if (error == 0) break; zio_suspend(spa, NULL, ZIO_SUSPEND_IOERR); zio_resume_wait(spa); } } /* * Sync the specified transaction group. New blocks may be dirtied as * part of the process, so we iterate until it converges. */ void spa_sync(spa_t *spa, uint64_t txg) { vdev_t *vd = NULL; VERIFY(spa_writeable(spa)); /* * Wait for i/os issued in open context that need to complete * before this txg syncs. */ (void) zio_wait(spa->spa_txg_zio[txg & TXG_MASK]); spa->spa_txg_zio[txg & TXG_MASK] = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); /* * Now that there can be no more cloning in this transaction group, * but we are still before issuing frees, we can process pending BRT * updates. */ brt_pending_apply(spa, txg); /* * Lock out configuration changes. */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); spa->spa_syncing_txg = txg; spa->spa_sync_pass = 0; for (int i = 0; i < spa->spa_alloc_count; i++) { mutex_enter(&spa->spa_allocs[i].spaa_lock); VERIFY0(avl_numnodes(&spa->spa_allocs[i].spaa_tree)); mutex_exit(&spa->spa_allocs[i].spaa_lock); } /* * If there are any pending vdev state changes, convert them * into config changes that go out with this transaction group. */ spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); while ((vd = list_head(&spa->spa_state_dirty_list)) != NULL) { /* Avoid holding the write lock unless actually necessary */ if (vd->vdev_aux == NULL) { vdev_state_clean(vd); vdev_config_dirty(vd); continue; } /* * We need the write lock here because, for aux vdevs, * calling vdev_config_dirty() modifies sav_config. * This is ugly and will become unnecessary when we * eliminate the aux vdev wart by integrating all vdevs * into the root vdev tree. */ spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_WRITER); while ((vd = list_head(&spa->spa_state_dirty_list)) != NULL) { vdev_state_clean(vd); vdev_config_dirty(vd); } spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER); } spa_config_exit(spa, SCL_STATE, FTAG); dsl_pool_t *dp = spa->spa_dsl_pool; dmu_tx_t *tx = dmu_tx_create_assigned(dp, txg); spa->spa_sync_starttime = gethrtime(); taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid); spa->spa_deadman_tqid = taskq_dispatch_delay(system_delay_taskq, spa_deadman, spa, TQ_SLEEP, ddi_get_lbolt() + NSEC_TO_TICK(spa->spa_deadman_synctime)); /* * If we are upgrading to SPA_VERSION_RAIDZ_DEFLATE this txg, * set spa_deflate if we have no raid-z vdevs. */ if (spa->spa_ubsync.ub_version < SPA_VERSION_RAIDZ_DEFLATE && spa->spa_uberblock.ub_version >= SPA_VERSION_RAIDZ_DEFLATE) { vdev_t *rvd = spa->spa_root_vdev; int i; for (i = 0; i < rvd->vdev_children; i++) { vd = rvd->vdev_child[i]; if (vd->vdev_deflate_ratio != SPA_MINBLOCKSIZE) break; } if (i == rvd->vdev_children) { spa->spa_deflate = TRUE; VERIFY0(zap_add(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DEFLATE, sizeof (uint64_t), 1, &spa->spa_deflate, tx)); } } spa_sync_adjust_vdev_max_queue_depth(spa); spa_sync_condense_indirect(spa, tx); spa_sync_iterate_to_convergence(spa, tx); #ifdef ZFS_DEBUG if (!list_is_empty(&spa->spa_config_dirty_list)) { /* * Make sure that the number of ZAPs for all the vdevs matches * the number of ZAPs in the per-vdev ZAP list. This only gets * called if the config is dirty; otherwise there may be * outstanding AVZ operations that weren't completed in * spa_sync_config_object. */ uint64_t all_vdev_zap_entry_count; ASSERT0(zap_count(spa->spa_meta_objset, spa->spa_all_vdev_zaps, &all_vdev_zap_entry_count)); ASSERT3U(vdev_count_verify_zaps(spa->spa_root_vdev), ==, all_vdev_zap_entry_count); } #endif if (spa->spa_vdev_removal != NULL) { ASSERT0(spa->spa_vdev_removal->svr_bytes_done[txg & TXG_MASK]); } spa_sync_rewrite_vdev_config(spa, tx); dmu_tx_commit(tx); taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid); spa->spa_deadman_tqid = 0; /* * Clear the dirty config list. */ while ((vd = list_head(&spa->spa_config_dirty_list)) != NULL) vdev_config_clean(vd); /* * Now that the new config has synced transactionally, * let it become visible to the config cache. */ if (spa->spa_config_syncing != NULL) { spa_config_set(spa, spa->spa_config_syncing); spa->spa_config_txg = txg; spa->spa_config_syncing = NULL; } dsl_pool_sync_done(dp, txg); for (int i = 0; i < spa->spa_alloc_count; i++) { mutex_enter(&spa->spa_allocs[i].spaa_lock); VERIFY0(avl_numnodes(&spa->spa_allocs[i].spaa_tree)); mutex_exit(&spa->spa_allocs[i].spaa_lock); } /* * Update usable space statistics. */ while ((vd = txg_list_remove(&spa->spa_vdev_txg_list, TXG_CLEAN(txg))) != NULL) vdev_sync_done(vd, txg); metaslab_class_evict_old(spa->spa_normal_class, txg); metaslab_class_evict_old(spa->spa_log_class, txg); /* spa_embedded_log_class has only one metaslab per vdev. */ metaslab_class_evict_old(spa->spa_special_class, txg); metaslab_class_evict_old(spa->spa_dedup_class, txg); spa_sync_close_syncing_log_sm(spa); spa_update_dspace(spa); if (spa_get_autotrim(spa) == SPA_AUTOTRIM_ON) vdev_autotrim_kick(spa); /* * It had better be the case that we didn't dirty anything * since vdev_config_sync(). */ ASSERT(txg_list_empty(&dp->dp_dirty_datasets, txg)); ASSERT(txg_list_empty(&dp->dp_dirty_dirs, txg)); ASSERT(txg_list_empty(&spa->spa_vdev_txg_list, txg)); while (zfs_pause_spa_sync) delay(1); spa->spa_sync_pass = 0; /* * Update the last synced uberblock here. We want to do this at * the end of spa_sync() so that consumers of spa_last_synced_txg() * will be guaranteed that all the processing associated with * that txg has been completed. */ spa->spa_ubsync = spa->spa_uberblock; spa_config_exit(spa, SCL_CONFIG, FTAG); spa_handle_ignored_writes(spa); /* * If any async tasks have been requested, kick them off. */ spa_async_dispatch(spa); } /* * Sync all pools. We don't want to hold the namespace lock across these * operations, so we take a reference on the spa_t and drop the lock during the * sync. */ void spa_sync_allpools(void) { spa_t *spa = NULL; mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa)) != NULL) { if (spa_state(spa) != POOL_STATE_ACTIVE || !spa_writeable(spa) || spa_suspended(spa)) continue; spa_open_ref(spa, FTAG); mutex_exit(&spa_namespace_lock); txg_wait_synced(spa_get_dsl(spa), 0); mutex_enter(&spa_namespace_lock); spa_close(spa, FTAG); } mutex_exit(&spa_namespace_lock); } taskq_t * spa_sync_tq_create(spa_t *spa, const char *name) { kthread_t **kthreads; ASSERT(spa->spa_sync_tq == NULL); ASSERT3S(spa->spa_alloc_count, <=, boot_ncpus); /* * - do not allow more allocators than cpus. * - there may be more cpus than allocators. * - do not allow more sync taskq threads than allocators or cpus. */ int nthreads = spa->spa_alloc_count; spa->spa_syncthreads = kmem_zalloc(sizeof (spa_syncthread_info_t) * nthreads, KM_SLEEP); spa->spa_sync_tq = taskq_create_synced(name, nthreads, minclsyspri, nthreads, INT_MAX, TASKQ_PREPOPULATE, &kthreads); VERIFY(spa->spa_sync_tq != NULL); VERIFY(kthreads != NULL); spa_syncthread_info_t *ti = spa->spa_syncthreads; for (int i = 0; i < nthreads; i++, ti++) { ti->sti_thread = kthreads[i]; ti->sti_allocator = i; } kmem_free(kthreads, sizeof (*kthreads) * nthreads); return (spa->spa_sync_tq); } void spa_sync_tq_destroy(spa_t *spa) { ASSERT(spa->spa_sync_tq != NULL); taskq_wait(spa->spa_sync_tq); taskq_destroy(spa->spa_sync_tq); kmem_free(spa->spa_syncthreads, sizeof (spa_syncthread_info_t) * spa->spa_alloc_count); spa->spa_sync_tq = NULL; } uint_t spa_acq_allocator(spa_t *spa) { int i; if (spa->spa_alloc_count == 1) return (0); mutex_enter(&spa->spa_allocs_use->sau_lock); uint_t r = spa->spa_allocs_use->sau_rotor; do { if (++r == spa->spa_alloc_count) r = 0; } while (spa->spa_allocs_use->sau_inuse[r]); spa->spa_allocs_use->sau_inuse[r] = B_TRUE; spa->spa_allocs_use->sau_rotor = r; mutex_exit(&spa->spa_allocs_use->sau_lock); spa_syncthread_info_t *ti = spa->spa_syncthreads; for (i = 0; i < spa->spa_alloc_count; i++, ti++) { if (ti->sti_thread == curthread) { ti->sti_allocator = r; break; } } ASSERT3S(i, <, spa->spa_alloc_count); return (r); } void spa_rel_allocator(spa_t *spa, uint_t allocator) { if (spa->spa_alloc_count > 1) spa->spa_allocs_use->sau_inuse[allocator] = B_FALSE; } void spa_select_allocator(zio_t *zio) { zbookmark_phys_t *bm = &zio->io_bookmark; spa_t *spa = zio->io_spa; ASSERT(zio->io_type == ZIO_TYPE_WRITE); /* * A gang block (for example) may have inherited its parent's * allocator, in which case there is nothing further to do here. */ if (ZIO_HAS_ALLOCATOR(zio)) return; ASSERT(spa != NULL); ASSERT(bm != NULL); /* * First try to use an allocator assigned to the syncthread, and set * the corresponding write issue taskq for the allocator. * Note, we must have an open pool to do this. */ if (spa->spa_sync_tq != NULL) { spa_syncthread_info_t *ti = spa->spa_syncthreads; for (int i = 0; i < spa->spa_alloc_count; i++, ti++) { if (ti->sti_thread == curthread) { zio->io_allocator = ti->sti_allocator; return; } } } /* * We want to try to use as many allocators as possible to help improve * performance, but we also want logically adjacent IOs to be physically * adjacent to improve sequential read performance. We chunk each object * into 2^20 block regions, and then hash based on the objset, object, * level, and region to accomplish both of these goals. */ uint64_t hv = cityhash4(bm->zb_objset, bm->zb_object, bm->zb_level, bm->zb_blkid >> 20); zio->io_allocator = (uint_t)hv % spa->spa_alloc_count; } /* * ========================================================================== * Miscellaneous routines * ========================================================================== */ /* * Remove all pools in the system. */ void spa_evict_all(void) { spa_t *spa; /* * Remove all cached state. All pools should be closed now, * so every spa in the AVL tree should be unreferenced. */ mutex_enter(&spa_namespace_lock); while ((spa = spa_next(NULL)) != NULL) { /* * Stop async tasks. The async thread may need to detach * a device that's been replaced, which requires grabbing * spa_namespace_lock, so we must drop it here. */ spa_open_ref(spa, FTAG); mutex_exit(&spa_namespace_lock); spa_async_suspend(spa); mutex_enter(&spa_namespace_lock); spa_close(spa, FTAG); if (spa->spa_state != POOL_STATE_UNINITIALIZED) { spa_unload(spa); spa_deactivate(spa); } spa_remove(spa); } mutex_exit(&spa_namespace_lock); } vdev_t * spa_lookup_by_guid(spa_t *spa, uint64_t guid, boolean_t aux) { vdev_t *vd; int i; if ((vd = vdev_lookup_by_guid(spa->spa_root_vdev, guid)) != NULL) return (vd); if (aux) { for (i = 0; i < spa->spa_l2cache.sav_count; i++) { vd = spa->spa_l2cache.sav_vdevs[i]; if (vd->vdev_guid == guid) return (vd); } for (i = 0; i < spa->spa_spares.sav_count; i++) { vd = spa->spa_spares.sav_vdevs[i]; if (vd->vdev_guid == guid) return (vd); } } return (NULL); } void spa_upgrade(spa_t *spa, uint64_t version) { ASSERT(spa_writeable(spa)); spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); /* * This should only be called for a non-faulted pool, and since a * future version would result in an unopenable pool, this shouldn't be * possible. */ ASSERT(SPA_VERSION_IS_SUPPORTED(spa->spa_uberblock.ub_version)); ASSERT3U(version, >=, spa->spa_uberblock.ub_version); spa->spa_uberblock.ub_version = version; vdev_config_dirty(spa->spa_root_vdev); spa_config_exit(spa, SCL_ALL, FTAG); txg_wait_synced(spa_get_dsl(spa), 0); } static boolean_t spa_has_aux_vdev(spa_t *spa, uint64_t guid, spa_aux_vdev_t *sav) { (void) spa; int i; uint64_t vdev_guid; for (i = 0; i < sav->sav_count; i++) if (sav->sav_vdevs[i]->vdev_guid == guid) return (B_TRUE); for (i = 0; i < sav->sav_npending; i++) { if (nvlist_lookup_uint64(sav->sav_pending[i], ZPOOL_CONFIG_GUID, &vdev_guid) == 0 && vdev_guid == guid) return (B_TRUE); } return (B_FALSE); } boolean_t spa_has_l2cache(spa_t *spa, uint64_t guid) { return (spa_has_aux_vdev(spa, guid, &spa->spa_l2cache)); } boolean_t spa_has_spare(spa_t *spa, uint64_t guid) { return (spa_has_aux_vdev(spa, guid, &spa->spa_spares)); } /* * Check if a pool has an active shared spare device. * Note: reference count of an active spare is 2, as a spare and as a replace */ static boolean_t spa_has_active_shared_spare(spa_t *spa) { int i, refcnt; uint64_t pool; spa_aux_vdev_t *sav = &spa->spa_spares; for (i = 0; i < sav->sav_count; i++) { if (spa_spare_exists(sav->sav_vdevs[i]->vdev_guid, &pool, &refcnt) && pool != 0ULL && pool == spa_guid(spa) && refcnt > 2) return (B_TRUE); } return (B_FALSE); } uint64_t spa_total_metaslabs(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; uint64_t m = 0; for (uint64_t c = 0; c < rvd->vdev_children; c++) { vdev_t *vd = rvd->vdev_child[c]; if (!vdev_is_concrete(vd)) continue; m += vd->vdev_ms_count; } return (m); } /* * Notify any waiting threads that some activity has switched from being in- * progress to not-in-progress so that the thread can wake up and determine * whether it is finished waiting. */ void spa_notify_waiters(spa_t *spa) { /* * Acquiring spa_activities_lock here prevents the cv_broadcast from * happening between the waiting thread's check and cv_wait. */ mutex_enter(&spa->spa_activities_lock); cv_broadcast(&spa->spa_activities_cv); mutex_exit(&spa->spa_activities_lock); } /* * Notify any waiting threads that the pool is exporting, and then block until * they are finished using the spa_t. */ void spa_wake_waiters(spa_t *spa) { mutex_enter(&spa->spa_activities_lock); spa->spa_waiters_cancel = B_TRUE; cv_broadcast(&spa->spa_activities_cv); while (spa->spa_waiters != 0) cv_wait(&spa->spa_waiters_cv, &spa->spa_activities_lock); spa->spa_waiters_cancel = B_FALSE; mutex_exit(&spa->spa_activities_lock); } /* Whether the vdev or any of its descendants are being initialized/trimmed. */ static boolean_t spa_vdev_activity_in_progress_impl(vdev_t *vd, zpool_wait_activity_t activity) { spa_t *spa = vd->vdev_spa; ASSERT(spa_config_held(spa, SCL_CONFIG | SCL_STATE, RW_READER)); ASSERT(MUTEX_HELD(&spa->spa_activities_lock)); ASSERT(activity == ZPOOL_WAIT_INITIALIZE || activity == ZPOOL_WAIT_TRIM); kmutex_t *lock = activity == ZPOOL_WAIT_INITIALIZE ? &vd->vdev_initialize_lock : &vd->vdev_trim_lock; mutex_exit(&spa->spa_activities_lock); mutex_enter(lock); mutex_enter(&spa->spa_activities_lock); boolean_t in_progress = (activity == ZPOOL_WAIT_INITIALIZE) ? (vd->vdev_initialize_state == VDEV_INITIALIZE_ACTIVE) : (vd->vdev_trim_state == VDEV_TRIM_ACTIVE); mutex_exit(lock); if (in_progress) return (B_TRUE); for (int i = 0; i < vd->vdev_children; i++) { if (spa_vdev_activity_in_progress_impl(vd->vdev_child[i], activity)) return (B_TRUE); } return (B_FALSE); } /* * If use_guid is true, this checks whether the vdev specified by guid is * being initialized/trimmed. Otherwise, it checks whether any vdev in the pool * is being initialized/trimmed. The caller must hold the config lock and * spa_activities_lock. */ static int spa_vdev_activity_in_progress(spa_t *spa, boolean_t use_guid, uint64_t guid, zpool_wait_activity_t activity, boolean_t *in_progress) { mutex_exit(&spa->spa_activities_lock); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER); mutex_enter(&spa->spa_activities_lock); vdev_t *vd; if (use_guid) { vd = spa_lookup_by_guid(spa, guid, B_FALSE); if (vd == NULL || !vd->vdev_ops->vdev_op_leaf) { spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (EINVAL); } } else { vd = spa->spa_root_vdev; } *in_progress = spa_vdev_activity_in_progress_impl(vd, activity); spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); return (0); } /* * Locking for waiting threads * --------------------------- * * Waiting threads need a way to check whether a given activity is in progress, * and then, if it is, wait for it to complete. Each activity will have some * in-memory representation of the relevant on-disk state which can be used to * determine whether or not the activity is in progress. The in-memory state and * the locking used to protect it will be different for each activity, and may * not be suitable for use with a cvar (e.g., some state is protected by the * config lock). To allow waiting threads to wait without any races, another * lock, spa_activities_lock, is used. * * When the state is checked, both the activity-specific lock (if there is one) * and spa_activities_lock are held. In some cases, the activity-specific lock * is acquired explicitly (e.g. the config lock). In others, the locking is * internal to some check (e.g. bpobj_is_empty). After checking, the waiting * thread releases the activity-specific lock and, if the activity is in * progress, then cv_waits using spa_activities_lock. * * The waiting thread is woken when another thread, one completing some * activity, updates the state of the activity and then calls * spa_notify_waiters, which will cv_broadcast. This 'completing' thread only * needs to hold its activity-specific lock when updating the state, and this * lock can (but doesn't have to) be dropped before calling spa_notify_waiters. * * Because spa_notify_waiters acquires spa_activities_lock before broadcasting, * and because it is held when the waiting thread checks the state of the * activity, it can never be the case that the completing thread both updates * the activity state and cv_broadcasts in between the waiting thread's check * and cv_wait. Thus, a waiting thread can never miss a wakeup. * * In order to prevent deadlock, when the waiting thread does its check, in some * cases it will temporarily drop spa_activities_lock in order to acquire the * activity-specific lock. The order in which spa_activities_lock and the * activity specific lock are acquired in the waiting thread is determined by * the order in which they are acquired in the completing thread; if the * completing thread calls spa_notify_waiters with the activity-specific lock * held, then the waiting thread must also acquire the activity-specific lock * first. */ static int spa_activity_in_progress(spa_t *spa, zpool_wait_activity_t activity, boolean_t use_tag, uint64_t tag, boolean_t *in_progress) { int error = 0; ASSERT(MUTEX_HELD(&spa->spa_activities_lock)); switch (activity) { case ZPOOL_WAIT_CKPT_DISCARD: *in_progress = (spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT) && zap_contains(spa_meta_objset(spa), DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_ZPOOL_CHECKPOINT) == ENOENT); break; case ZPOOL_WAIT_FREE: *in_progress = ((spa_version(spa) >= SPA_VERSION_DEADLISTS && !bpobj_is_empty(&spa->spa_dsl_pool->dp_free_bpobj)) || spa_feature_is_active(spa, SPA_FEATURE_ASYNC_DESTROY) || spa_livelist_delete_check(spa)); break; case ZPOOL_WAIT_INITIALIZE: case ZPOOL_WAIT_TRIM: error = spa_vdev_activity_in_progress(spa, use_tag, tag, activity, in_progress); break; case ZPOOL_WAIT_REPLACE: mutex_exit(&spa->spa_activities_lock); spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER); mutex_enter(&spa->spa_activities_lock); *in_progress = vdev_replace_in_progress(spa->spa_root_vdev); spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG); break; case ZPOOL_WAIT_REMOVE: *in_progress = (spa->spa_removing_phys.sr_state == DSS_SCANNING); break; case ZPOOL_WAIT_RESILVER: *in_progress = vdev_rebuild_active(spa->spa_root_vdev); if (*in_progress) break; zfs_fallthrough; case ZPOOL_WAIT_SCRUB: { boolean_t scanning, paused, is_scrub; dsl_scan_t *scn = spa->spa_dsl_pool->dp_scan; is_scrub = (scn->scn_phys.scn_func == POOL_SCAN_SCRUB); scanning = (scn->scn_phys.scn_state == DSS_SCANNING); paused = dsl_scan_is_paused_scrub(scn); *in_progress = (scanning && !paused && is_scrub == (activity == ZPOOL_WAIT_SCRUB)); break; } case ZPOOL_WAIT_RAIDZ_EXPAND: { vdev_raidz_expand_t *vre = spa->spa_raidz_expand; *in_progress = (vre != NULL && vre->vre_state == DSS_SCANNING); break; } default: panic("unrecognized value for activity %d", activity); } return (error); } static int spa_wait_common(const char *pool, zpool_wait_activity_t activity, boolean_t use_tag, uint64_t tag, boolean_t *waited) { /* * The tag is used to distinguish between instances of an activity. * 'initialize' and 'trim' are the only activities that we use this for. * The other activities can only have a single instance in progress in a * pool at one time, making the tag unnecessary. * * There can be multiple devices being replaced at once, but since they * all finish once resilvering finishes, we don't bother keeping track * of them individually, we just wait for them all to finish. */ if (use_tag && activity != ZPOOL_WAIT_INITIALIZE && activity != ZPOOL_WAIT_TRIM) return (EINVAL); if (activity < 0 || activity >= ZPOOL_WAIT_NUM_ACTIVITIES) return (EINVAL); spa_t *spa; int error = spa_open(pool, &spa, FTAG); if (error != 0) return (error); /* * Increment the spa's waiter count so that we can call spa_close and * still ensure that the spa_t doesn't get freed before this thread is * finished with it when the pool is exported. We want to call spa_close * before we start waiting because otherwise the additional ref would * prevent the pool from being exported or destroyed throughout the * potentially long wait. */ mutex_enter(&spa->spa_activities_lock); spa->spa_waiters++; spa_close(spa, FTAG); *waited = B_FALSE; for (;;) { boolean_t in_progress; error = spa_activity_in_progress(spa, activity, use_tag, tag, &in_progress); if (error || !in_progress || spa->spa_waiters_cancel) break; *waited = B_TRUE; if (cv_wait_sig(&spa->spa_activities_cv, &spa->spa_activities_lock) == 0) { error = EINTR; break; } } spa->spa_waiters--; cv_signal(&spa->spa_waiters_cv); mutex_exit(&spa->spa_activities_lock); return (error); } /* * Wait for a particular instance of the specified activity to complete, where * the instance is identified by 'tag' */ int spa_wait_tag(const char *pool, zpool_wait_activity_t activity, uint64_t tag, boolean_t *waited) { return (spa_wait_common(pool, activity, B_TRUE, tag, waited)); } /* * Wait for all instances of the specified activity complete */ int spa_wait(const char *pool, zpool_wait_activity_t activity, boolean_t *waited) { return (spa_wait_common(pool, activity, B_FALSE, 0, waited)); } sysevent_t * spa_event_create(spa_t *spa, vdev_t *vd, nvlist_t *hist_nvl, const char *name) { sysevent_t *ev = NULL; #ifdef _KERNEL nvlist_t *resource; resource = zfs_event_create(spa, vd, FM_SYSEVENT_CLASS, name, hist_nvl); if (resource) { ev = kmem_alloc(sizeof (sysevent_t), KM_SLEEP); ev->resource = resource; } #else (void) spa, (void) vd, (void) hist_nvl, (void) name; #endif return (ev); } void spa_event_post(sysevent_t *ev) { #ifdef _KERNEL if (ev) { zfs_zevent_post(ev->resource, NULL, zfs_zevent_post_cb); kmem_free(ev, sizeof (*ev)); } #else (void) ev; #endif } /* * Post a zevent corresponding to the given sysevent. The 'name' must be one * of the event definitions in sys/sysevent/eventdefs.h. The payload will be * filled in from the spa and (optionally) the vdev. This doesn't do anything * in the userland libzpool, as we don't want consumers to misinterpret ztest * or zdb as real changes. */ void spa_event_notify(spa_t *spa, vdev_t *vd, nvlist_t *hist_nvl, const char *name) { spa_event_post(spa_event_create(spa, vd, hist_nvl, name)); } /* state manipulation functions */ EXPORT_SYMBOL(spa_open); EXPORT_SYMBOL(spa_open_rewind); EXPORT_SYMBOL(spa_get_stats); EXPORT_SYMBOL(spa_create); EXPORT_SYMBOL(spa_import); EXPORT_SYMBOL(spa_tryimport); EXPORT_SYMBOL(spa_destroy); EXPORT_SYMBOL(spa_export); EXPORT_SYMBOL(spa_reset); EXPORT_SYMBOL(spa_async_request); EXPORT_SYMBOL(spa_async_suspend); EXPORT_SYMBOL(spa_async_resume); EXPORT_SYMBOL(spa_inject_addref); EXPORT_SYMBOL(spa_inject_delref); EXPORT_SYMBOL(spa_scan_stat_init); EXPORT_SYMBOL(spa_scan_get_stats); /* device manipulation */ EXPORT_SYMBOL(spa_vdev_add); EXPORT_SYMBOL(spa_vdev_attach); EXPORT_SYMBOL(spa_vdev_detach); EXPORT_SYMBOL(spa_vdev_setpath); EXPORT_SYMBOL(spa_vdev_setfru); EXPORT_SYMBOL(spa_vdev_split_mirror); /* spare statech is global across all pools) */ EXPORT_SYMBOL(spa_spare_add); EXPORT_SYMBOL(spa_spare_remove); EXPORT_SYMBOL(spa_spare_exists); EXPORT_SYMBOL(spa_spare_activate); /* L2ARC statech is global across all pools) */ EXPORT_SYMBOL(spa_l2cache_add); EXPORT_SYMBOL(spa_l2cache_remove); EXPORT_SYMBOL(spa_l2cache_exists); EXPORT_SYMBOL(spa_l2cache_activate); EXPORT_SYMBOL(spa_l2cache_drop); /* scanning */ EXPORT_SYMBOL(spa_scan); EXPORT_SYMBOL(spa_scan_stop); /* spa syncing */ EXPORT_SYMBOL(spa_sync); /* only for DMU use */ EXPORT_SYMBOL(spa_sync_allpools); /* properties */ EXPORT_SYMBOL(spa_prop_set); EXPORT_SYMBOL(spa_prop_get); EXPORT_SYMBOL(spa_prop_clear_bootfs); /* asynchronous event notification */ EXPORT_SYMBOL(spa_event_notify); ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, preload_pct, UINT, ZMOD_RW, "Percentage of CPUs to run a metaslab preload taskq"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs_spa, spa_, load_verify_shift, UINT, ZMOD_RW, "log2 fraction of arc that can be used by inflight I/Os when " "verifying pool during import"); /* END CSTYLED */ ZFS_MODULE_PARAM(zfs_spa, spa_, load_verify_metadata, INT, ZMOD_RW, "Set to traverse metadata on pool import"); ZFS_MODULE_PARAM(zfs_spa, spa_, load_verify_data, INT, ZMOD_RW, "Set to traverse data on pool import"); ZFS_MODULE_PARAM(zfs_spa, spa_, load_print_vdev_tree, INT, ZMOD_RW, "Print vdev tree to zfs_dbgmsg during pool import"); ZFS_MODULE_PARAM(zfs_zio, zio_, taskq_batch_pct, UINT, ZMOD_RW, "Percentage of CPUs to run an IO worker thread"); ZFS_MODULE_PARAM(zfs_zio, zio_, taskq_batch_tpq, UINT, ZMOD_RW, "Number of threads per IO worker taskqueue"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs, zfs_, max_missing_tvds, U64, ZMOD_RW, "Allow importing pool with up to this number of missing top-level " "vdevs (in read-only mode)"); /* END CSTYLED */ ZFS_MODULE_PARAM(zfs_livelist_condense, zfs_livelist_condense_, zthr_pause, INT, ZMOD_RW, "Set the livelist condense zthr to pause"); ZFS_MODULE_PARAM(zfs_livelist_condense, zfs_livelist_condense_, sync_pause, INT, ZMOD_RW, "Set the livelist condense synctask to pause"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs_livelist_condense, zfs_livelist_condense_, sync_cancel, INT, ZMOD_RW, "Whether livelist condensing was canceled in the synctask"); ZFS_MODULE_PARAM(zfs_livelist_condense, zfs_livelist_condense_, zthr_cancel, INT, ZMOD_RW, "Whether livelist condensing was canceled in the zthr function"); ZFS_MODULE_PARAM(zfs_livelist_condense, zfs_livelist_condense_, new_alloc, INT, ZMOD_RW, "Whether extra ALLOC blkptrs were added to a livelist entry while it " "was being condensed"); #ifdef _KERNEL ZFS_MODULE_VIRTUAL_PARAM_CALL(zfs_zio, zio_, taskq_read, spa_taskq_read_param_set, spa_taskq_read_param_get, ZMOD_RW, "Configure IO queues for read IO"); ZFS_MODULE_VIRTUAL_PARAM_CALL(zfs_zio, zio_, taskq_write, spa_taskq_write_param_set, spa_taskq_write_param_get, ZMOD_RW, "Configure IO queues for write IO"); #endif /* END CSTYLED */ ZFS_MODULE_PARAM(zfs_zio, zio_, taskq_write_tpq, UINT, ZMOD_RW, "Number of CPUs per write issue taskq"); diff --git a/module/zfs/spa_misc.c b/module/zfs/spa_misc.c index d1d41bbe7214..439e56f0d0df 100644 --- a/module/zfs/spa_misc.c +++ b/module/zfs/spa_misc.c @@ -1,3129 +1,3136 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2024 by Delphix. All rights reserved. * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. * Copyright 2013 Saso Kiselkov. All rights reserved. * Copyright (c) 2017 Datto Inc. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019, loli10K . All rights reserved. * Copyright (c) 2023, 2024, Klara Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_prop.h" #include #include #include #include /* * SPA locking * * There are three basic locks for managing spa_t structures: * * spa_namespace_lock (global mutex) * * This lock must be acquired to do any of the following: * * - Lookup a spa_t by name * - Add or remove a spa_t from the namespace * - Increase spa_refcount from non-zero * - Check if spa_refcount is zero * - Rename a spa_t * - add/remove/attach/detach devices * - Held for the duration of create/destroy * - Held at the start and end of import and export * * It does not need to handle recursion. A create or destroy may * reference objects (files or zvols) in other pools, but by * definition they must have an existing reference, and will never need * to lookup a spa_t by name. * * spa_refcount (per-spa zfs_refcount_t protected by mutex) * * This reference count keep track of any active users of the spa_t. The * spa_t cannot be destroyed or freed while this is non-zero. Internally, * the refcount is never really 'zero' - opening a pool implicitly keeps * some references in the DMU. Internally we check against spa_minref, but * present the image of a zero/non-zero value to consumers. * * spa_config_lock[] (per-spa array of rwlocks) * * This protects the spa_t from config changes, and must be held in * the following circumstances: * * - RW_READER to perform I/O to the spa * - RW_WRITER to change the vdev config * * The locking order is fairly straightforward: * * spa_namespace_lock -> spa_refcount * * The namespace lock must be acquired to increase the refcount from 0 * or to check if it is zero. * * spa_refcount -> spa_config_lock[] * * There must be at least one valid reference on the spa_t to acquire * the config lock. * * spa_namespace_lock -> spa_config_lock[] * * The namespace lock must always be taken before the config lock. * * * The spa_namespace_lock can be acquired directly and is globally visible. * * The namespace is manipulated using the following functions, all of which * require the spa_namespace_lock to be held. * * spa_lookup() Lookup a spa_t by name. * * spa_add() Create a new spa_t in the namespace. * * spa_remove() Remove a spa_t from the namespace. This also * frees up any memory associated with the spa_t. * * spa_next() Returns the next spa_t in the system, or the * first if NULL is passed. * * spa_evict_all() Shutdown and remove all spa_t structures in * the system. * * spa_guid_exists() Determine whether a pool/device guid exists. * * The spa_refcount is manipulated using the following functions: * * spa_open_ref() Adds a reference to the given spa_t. Must be * called with spa_namespace_lock held if the * refcount is currently zero. * * spa_close() Remove a reference from the spa_t. This will * not free the spa_t or remove it from the * namespace. No locking is required. * * spa_refcount_zero() Returns true if the refcount is currently * zero. Must be called with spa_namespace_lock * held. * * The spa_config_lock[] is an array of rwlocks, ordered as follows: * SCL_CONFIG > SCL_STATE > SCL_ALLOC > SCL_ZIO > SCL_FREE > SCL_VDEV. * spa_config_lock[] is manipulated with spa_config_{enter,exit,held}(). * * To read the configuration, it suffices to hold one of these locks as reader. * To modify the configuration, you must hold all locks as writer. To modify * vdev state without altering the vdev tree's topology (e.g. online/offline), * you must hold SCL_STATE and SCL_ZIO as writer. * * We use these distinct config locks to avoid recursive lock entry. * For example, spa_sync() (which holds SCL_CONFIG as reader) induces * block allocations (SCL_ALLOC), which may require reading space maps * from disk (dmu_read() -> zio_read() -> SCL_ZIO). * * The spa config locks cannot be normal rwlocks because we need the * ability to hand off ownership. For example, SCL_ZIO is acquired * by the issuing thread and later released by an interrupt thread. * They do, however, obey the usual write-wanted semantics to prevent * writer (i.e. system administrator) starvation. * * The lock acquisition rules are as follows: * * SCL_CONFIG * Protects changes to the vdev tree topology, such as vdev * add/remove/attach/detach. Protects the dirty config list * (spa_config_dirty_list) and the set of spares and l2arc devices. * * SCL_STATE * Protects changes to pool state and vdev state, such as vdev * online/offline/fault/degrade/clear. Protects the dirty state list * (spa_state_dirty_list) and global pool state (spa_state). * * SCL_ALLOC * Protects changes to metaslab groups and classes. * Held as reader by metaslab_alloc() and metaslab_claim(). * * SCL_ZIO * Held by bp-level zios (those which have no io_vd upon entry) * to prevent changes to the vdev tree. The bp-level zio implicitly * protects all of its vdev child zios, which do not hold SCL_ZIO. * * SCL_FREE * Protects changes to metaslab groups and classes. * Held as reader by metaslab_free(). SCL_FREE is distinct from * SCL_ALLOC, and lower than SCL_ZIO, so that we can safely free * blocks in zio_done() while another i/o that holds either * SCL_ALLOC or SCL_ZIO is waiting for this i/o to complete. * * SCL_VDEV * Held as reader to prevent changes to the vdev tree during trivial * inquiries such as bp_get_dsize(). SCL_VDEV is distinct from the * other locks, and lower than all of them, to ensure that it's safe * to acquire regardless of caller context. * * In addition, the following rules apply: * * (a) spa_props_lock protects pool properties, spa_config and spa_config_list. * The lock ordering is SCL_CONFIG > spa_props_lock. * * (b) I/O operations on leaf vdevs. For any zio operation that takes * an explicit vdev_t argument -- such as zio_ioctl(), zio_read_phys(), * or zio_write_phys() -- the caller must ensure that the config cannot * cannot change in the interim, and that the vdev cannot be reopened. * SCL_STATE as reader suffices for both. * * The vdev configuration is protected by spa_vdev_enter() / spa_vdev_exit(). * * spa_vdev_enter() Acquire the namespace lock and the config lock * for writing. * * spa_vdev_exit() Release the config lock, wait for all I/O * to complete, sync the updated configs to the * cache, and release the namespace lock. * * vdev state is protected by spa_vdev_state_enter() / spa_vdev_state_exit(). * Like spa_vdev_enter/exit, these are convenience wrappers -- the actual * locking is, always, based on spa_namespace_lock and spa_config_lock[]. */ avl_tree_t spa_namespace_avl; kmutex_t spa_namespace_lock; kcondvar_t spa_namespace_cv; static const int spa_max_replication_override = SPA_DVAS_PER_BP; static kmutex_t spa_spare_lock; static avl_tree_t spa_spare_avl; static kmutex_t spa_l2cache_lock; static avl_tree_t spa_l2cache_avl; spa_mode_t spa_mode_global = SPA_MODE_UNINIT; #ifdef ZFS_DEBUG /* * Everything except dprintf, set_error, spa, and indirect_remap is on * by default in debug builds. */ int zfs_flags = ~(ZFS_DEBUG_DPRINTF | ZFS_DEBUG_SET_ERROR | ZFS_DEBUG_INDIRECT_REMAP); #else int zfs_flags = 0; #endif /* * zfs_recover can be set to nonzero to attempt to recover from * otherwise-fatal errors, typically caused by on-disk corruption. When * set, calls to zfs_panic_recover() will turn into warning messages. * This should only be used as a last resort, as it typically results * in leaked space, or worse. */ int zfs_recover = B_FALSE; /* * If destroy encounters an EIO while reading metadata (e.g. indirect * blocks), space referenced by the missing metadata can not be freed. * Normally this causes the background destroy to become "stalled", as * it is unable to make forward progress. While in this stalled state, * all remaining space to free from the error-encountering filesystem is * "temporarily leaked". Set this flag to cause it to ignore the EIO, * permanently leak the space from indirect blocks that can not be read, * and continue to free everything else that it can. * * The default, "stalling" behavior is useful if the storage partially * fails (i.e. some but not all i/os fail), and then later recovers. In * this case, we will be able to continue pool operations while it is * partially failed, and when it recovers, we can continue to free the * space, with no leaks. However, note that this case is actually * fairly rare. * * Typically pools either (a) fail completely (but perhaps temporarily, * e.g. a top-level vdev going offline), or (b) have localized, * permanent errors (e.g. disk returns the wrong data due to bit flip or * firmware bug). In case (a), this setting does not matter because the * pool will be suspended and the sync thread will not be able to make * forward progress regardless. In case (b), because the error is * permanent, the best we can do is leak the minimum amount of space, * which is what setting this flag will do. Therefore, it is reasonable * for this flag to normally be set, but we chose the more conservative * approach of not setting it, so that there is no possibility of * leaking space in the "partial temporary" failure case. */ int zfs_free_leak_on_eio = B_FALSE; /* * Expiration time in milliseconds. This value has two meanings. First it is * used to determine when the spa_deadman() logic should fire. By default the * spa_deadman() will fire if spa_sync() has not completed in 600 seconds. * Secondly, the value determines if an I/O is considered "hung". Any I/O that * has not completed in zfs_deadman_synctime_ms is considered "hung" resulting * in one of three behaviors controlled by zfs_deadman_failmode. */ uint64_t zfs_deadman_synctime_ms = 600000UL; /* 10 min. */ /* * This value controls the maximum amount of time zio_wait() will block for an * outstanding IO. By default this is 300 seconds at which point the "hung" * behavior will be applied as described for zfs_deadman_synctime_ms. */ uint64_t zfs_deadman_ziotime_ms = 300000UL; /* 5 min. */ /* * Check time in milliseconds. This defines the frequency at which we check * for hung I/O. */ uint64_t zfs_deadman_checktime_ms = 60000UL; /* 1 min. */ /* * By default the deadman is enabled. */ int zfs_deadman_enabled = B_TRUE; /* * Controls the behavior of the deadman when it detects a "hung" I/O. * Valid values are zfs_deadman_failmode=. * * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system */ const char *zfs_deadman_failmode = "wait"; /* * The worst case is single-sector max-parity RAID-Z blocks, in which * case the space requirement is exactly (VDEV_RAIDZ_MAXPARITY + 1) * times the size; so just assume that. Add to this the fact that * we can have up to 3 DVAs per bp, and one more factor of 2 because * the block may be dittoed with up to 3 DVAs by ddt_sync(). All together, * the worst case is: * (VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24 */ uint_t spa_asize_inflation = 24; /* * Normally, we don't allow the last 3.2% (1/(2^spa_slop_shift)) of space in * the pool to be consumed (bounded by spa_max_slop). This ensures that we * don't run the pool completely out of space, due to unaccounted changes (e.g. * to the MOS). It also limits the worst-case time to allocate space. If we * have less than this amount of free space, most ZPL operations (e.g. write, * create) will return ENOSPC. The ZIL metaslabs (spa_embedded_log_class) are * also part of this 3.2% of space which can't be consumed by normal writes; * the slop space "proper" (spa_get_slop_space()) is decreased by the embedded * log space. * * Certain operations (e.g. file removal, most administrative actions) can * use half the slop space. They will only return ENOSPC if less than half * the slop space is free. Typically, once the pool has less than the slop * space free, the user will use these operations to free up space in the pool. * These are the operations that call dsl_pool_adjustedsize() with the netfree * argument set to TRUE. * * Operations that are almost guaranteed to free up space in the absence of * a pool checkpoint can use up to three quarters of the slop space * (e.g zfs destroy). * * A very restricted set of operations are always permitted, regardless of * the amount of free space. These are the operations that call * dsl_sync_task(ZFS_SPACE_CHECK_NONE). If these operations result in a net * increase in the amount of space used, it is possible to run the pool * completely out of space, causing it to be permanently read-only. * * Note that on very small pools, the slop space will be larger than * 3.2%, in an effort to have it be at least spa_min_slop (128MB), * but we never allow it to be more than half the pool size. * * Further, on very large pools, the slop space will be smaller than * 3.2%, to avoid reserving much more space than we actually need; bounded * by spa_max_slop (128GB). * * See also the comments in zfs_space_check_t. */ uint_t spa_slop_shift = 5; static const uint64_t spa_min_slop = 128ULL * 1024 * 1024; static const uint64_t spa_max_slop = 128ULL * 1024 * 1024 * 1024; /* * Number of allocators to use, per spa instance */ static int spa_num_allocators = 4; static int spa_cpus_per_allocator = 4; /* * Spa active allocator. * Valid values are zfs_active_allocator=. */ const char *zfs_active_allocator = "dynamic"; void spa_load_failed(spa_t *spa, const char *fmt, ...) { va_list adx; char buf[256]; va_start(adx, fmt); (void) vsnprintf(buf, sizeof (buf), fmt, adx); va_end(adx); zfs_dbgmsg("spa_load(%s, config %s): FAILED: %s", spa->spa_name, spa->spa_trust_config ? "trusted" : "untrusted", buf); } void spa_load_note(spa_t *spa, const char *fmt, ...) { va_list adx; char buf[256]; va_start(adx, fmt); (void) vsnprintf(buf, sizeof (buf), fmt, adx); va_end(adx); zfs_dbgmsg("spa_load(%s, config %s): %s", spa->spa_name, spa->spa_trust_config ? "trusted" : "untrusted", buf); spa_import_progress_set_notes_nolog(spa, "%s", buf); } /* * By default dedup and user data indirects land in the special class */ static int zfs_ddt_data_is_special = B_TRUE; static int zfs_user_indirect_is_special = B_TRUE; /* * The percentage of special class final space reserved for metadata only. * Once we allocate 100 - zfs_special_class_metadata_reserve_pct we only * let metadata into the class. */ static uint_t zfs_special_class_metadata_reserve_pct = 25; /* * ========================================================================== * SPA config locking * ========================================================================== */ static void spa_config_lock_init(spa_t *spa) { for (int i = 0; i < SCL_LOCKS; i++) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; mutex_init(&scl->scl_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&scl->scl_cv, NULL, CV_DEFAULT, NULL); scl->scl_writer = NULL; scl->scl_write_wanted = 0; scl->scl_count = 0; } } static void spa_config_lock_destroy(spa_t *spa) { for (int i = 0; i < SCL_LOCKS; i++) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; mutex_destroy(&scl->scl_lock); cv_destroy(&scl->scl_cv); ASSERT(scl->scl_writer == NULL); ASSERT(scl->scl_write_wanted == 0); ASSERT(scl->scl_count == 0); } } int spa_config_tryenter(spa_t *spa, int locks, const void *tag, krw_t rw) { for (int i = 0; i < SCL_LOCKS; i++) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; if (!(locks & (1 << i))) continue; mutex_enter(&scl->scl_lock); if (rw == RW_READER) { if (scl->scl_writer || scl->scl_write_wanted) { mutex_exit(&scl->scl_lock); spa_config_exit(spa, locks & ((1 << i) - 1), tag); return (0); } } else { ASSERT(scl->scl_writer != curthread); if (scl->scl_count != 0) { mutex_exit(&scl->scl_lock); spa_config_exit(spa, locks & ((1 << i) - 1), tag); return (0); } scl->scl_writer = curthread; } scl->scl_count++; mutex_exit(&scl->scl_lock); } return (1); } static void spa_config_enter_impl(spa_t *spa, int locks, const void *tag, krw_t rw, int mmp_flag) { (void) tag; int wlocks_held = 0; ASSERT3U(SCL_LOCKS, <, sizeof (wlocks_held) * NBBY); for (int i = 0; i < SCL_LOCKS; i++) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; if (scl->scl_writer == curthread) wlocks_held |= (1 << i); if (!(locks & (1 << i))) continue; mutex_enter(&scl->scl_lock); if (rw == RW_READER) { while (scl->scl_writer || (!mmp_flag && scl->scl_write_wanted)) { cv_wait(&scl->scl_cv, &scl->scl_lock); } } else { ASSERT(scl->scl_writer != curthread); while (scl->scl_count != 0) { scl->scl_write_wanted++; cv_wait(&scl->scl_cv, &scl->scl_lock); scl->scl_write_wanted--; } scl->scl_writer = curthread; } scl->scl_count++; mutex_exit(&scl->scl_lock); } ASSERT3U(wlocks_held, <=, locks); } void spa_config_enter(spa_t *spa, int locks, const void *tag, krw_t rw) { spa_config_enter_impl(spa, locks, tag, rw, 0); } /* * The spa_config_enter_mmp() allows the mmp thread to cut in front of * outstanding write lock requests. This is needed since the mmp updates are * time sensitive and failure to service them promptly will result in a * suspended pool. This pool suspension has been seen in practice when there is * a single disk in a pool that is responding slowly and presumably about to * fail. */ void spa_config_enter_mmp(spa_t *spa, int locks, const void *tag, krw_t rw) { spa_config_enter_impl(spa, locks, tag, rw, 1); } void spa_config_exit(spa_t *spa, int locks, const void *tag) { (void) tag; for (int i = SCL_LOCKS - 1; i >= 0; i--) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; if (!(locks & (1 << i))) continue; mutex_enter(&scl->scl_lock); ASSERT(scl->scl_count > 0); if (--scl->scl_count == 0) { ASSERT(scl->scl_writer == NULL || scl->scl_writer == curthread); scl->scl_writer = NULL; /* OK in either case */ cv_broadcast(&scl->scl_cv); } mutex_exit(&scl->scl_lock); } } int spa_config_held(spa_t *spa, int locks, krw_t rw) { int locks_held = 0; for (int i = 0; i < SCL_LOCKS; i++) { spa_config_lock_t *scl = &spa->spa_config_lock[i]; if (!(locks & (1 << i))) continue; if ((rw == RW_READER && scl->scl_count != 0) || (rw == RW_WRITER && scl->scl_writer == curthread)) locks_held |= 1 << i; } return (locks_held); } /* * ========================================================================== * SPA namespace functions * ========================================================================== */ /* * Lookup the named spa_t in the AVL tree. The spa_namespace_lock must be held. * Returns NULL if no matching spa_t is found. */ spa_t * spa_lookup(const char *name) { static spa_t search; /* spa_t is large; don't allocate on stack */ spa_t *spa; avl_index_t where; char *cp; ASSERT(MUTEX_HELD(&spa_namespace_lock)); retry: (void) strlcpy(search.spa_name, name, sizeof (search.spa_name)); /* * If it's a full dataset name, figure out the pool name and * just use that. */ cp = strpbrk(search.spa_name, "/@#"); if (cp != NULL) *cp = '\0'; spa = avl_find(&spa_namespace_avl, &search, &where); if (spa == NULL) return (NULL); /* * Avoid racing with import/export, which don't hold the namespace * lock for their entire duration. */ if ((spa->spa_load_thread != NULL && spa->spa_load_thread != curthread) || (spa->spa_export_thread != NULL && spa->spa_export_thread != curthread)) { cv_wait(&spa_namespace_cv, &spa_namespace_lock); goto retry; } return (spa); } /* * Fires when spa_sync has not completed within zfs_deadman_synctime_ms. * If the zfs_deadman_enabled flag is set then it inspects all vdev queues * looking for potentially hung I/Os. */ void spa_deadman(void *arg) { spa_t *spa = arg; /* Disable the deadman if the pool is suspended. */ if (spa_suspended(spa)) return; zfs_dbgmsg("slow spa_sync: started %llu seconds ago, calls %llu", (gethrtime() - spa->spa_sync_starttime) / NANOSEC, (u_longlong_t)++spa->spa_deadman_calls); if (zfs_deadman_enabled) vdev_deadman(spa->spa_root_vdev, FTAG); spa->spa_deadman_tqid = taskq_dispatch_delay(system_delay_taskq, spa_deadman, spa, TQ_SLEEP, ddi_get_lbolt() + MSEC_TO_TICK(zfs_deadman_checktime_ms)); } static int spa_log_sm_sort_by_txg(const void *va, const void *vb) { const spa_log_sm_t *a = va; const spa_log_sm_t *b = vb; return (TREE_CMP(a->sls_txg, b->sls_txg)); } /* * Create an uninitialized spa_t with the given name. Requires * spa_namespace_lock. The caller must ensure that the spa_t doesn't already * exist by calling spa_lookup() first. */ spa_t * spa_add(const char *name, nvlist_t *config, const char *altroot) { spa_t *spa; spa_config_dirent_t *dp; ASSERT(MUTEX_HELD(&spa_namespace_lock)); spa = kmem_zalloc(sizeof (spa_t), KM_SLEEP); mutex_init(&spa->spa_async_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_errlist_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_errlog_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_evicting_os_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_history_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_proc_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_props_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_cksum_tmpls_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_scrub_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_suspend_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_vdev_top_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_feat_stats_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_flushed_ms_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa->spa_activities_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&spa->spa_async_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_evicting_os_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_proc_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_scrub_io_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_suspend_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_activities_cv, NULL, CV_DEFAULT, NULL); cv_init(&spa->spa_waiters_cv, NULL, CV_DEFAULT, NULL); for (int t = 0; t < TXG_SIZE; t++) bplist_create(&spa->spa_free_bplist[t]); (void) strlcpy(spa->spa_name, name, sizeof (spa->spa_name)); spa->spa_state = POOL_STATE_UNINITIALIZED; spa->spa_freeze_txg = UINT64_MAX; spa->spa_final_txg = UINT64_MAX; spa->spa_load_max_txg = UINT64_MAX; spa->spa_proc = &p0; spa->spa_proc_state = SPA_PROC_NONE; spa->spa_trust_config = B_TRUE; spa->spa_hostid = zone_get_hostid(NULL); spa->spa_deadman_synctime = MSEC2NSEC(zfs_deadman_synctime_ms); spa->spa_deadman_ziotime = MSEC2NSEC(zfs_deadman_ziotime_ms); spa_set_deadman_failmode(spa, zfs_deadman_failmode); spa_set_allocator(spa, zfs_active_allocator); zfs_refcount_create(&spa->spa_refcount); spa_config_lock_init(spa); spa_stats_init(spa); ASSERT(MUTEX_HELD(&spa_namespace_lock)); avl_add(&spa_namespace_avl, spa); /* * Set the alternate root, if there is one. */ if (altroot) spa->spa_root = spa_strdup(altroot); /* Do not allow more allocators than fraction of CPUs. */ spa->spa_alloc_count = MAX(MIN(spa_num_allocators, boot_ncpus / MAX(spa_cpus_per_allocator, 1)), 1); spa->spa_allocs = kmem_zalloc(spa->spa_alloc_count * sizeof (spa_alloc_t), KM_SLEEP); for (int i = 0; i < spa->spa_alloc_count; i++) { mutex_init(&spa->spa_allocs[i].spaa_lock, NULL, MUTEX_DEFAULT, NULL); avl_create(&spa->spa_allocs[i].spaa_tree, zio_bookmark_compare, sizeof (zio_t), offsetof(zio_t, io_queue_node.a)); } if (spa->spa_alloc_count > 1) { spa->spa_allocs_use = kmem_zalloc(offsetof(spa_allocs_use_t, sau_inuse[spa->spa_alloc_count]), KM_SLEEP); mutex_init(&spa->spa_allocs_use->sau_lock, NULL, MUTEX_DEFAULT, NULL); } avl_create(&spa->spa_metaslabs_by_flushed, metaslab_sort_by_flushed, sizeof (metaslab_t), offsetof(metaslab_t, ms_spa_txg_node)); avl_create(&spa->spa_sm_logs_by_txg, spa_log_sm_sort_by_txg, sizeof (spa_log_sm_t), offsetof(spa_log_sm_t, sls_node)); list_create(&spa->spa_log_summary, sizeof (log_summary_entry_t), offsetof(log_summary_entry_t, lse_node)); /* * Every pool starts with the default cachefile */ list_create(&spa->spa_config_list, sizeof (spa_config_dirent_t), offsetof(spa_config_dirent_t, scd_link)); dp = kmem_zalloc(sizeof (spa_config_dirent_t), KM_SLEEP); dp->scd_path = altroot ? NULL : spa_strdup(spa_config_path); list_insert_head(&spa->spa_config_list, dp); VERIFY(nvlist_alloc(&spa->spa_load_info, NV_UNIQUE_NAME, KM_SLEEP) == 0); if (config != NULL) { nvlist_t *features; if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_FEATURES_FOR_READ, &features) == 0) { VERIFY(nvlist_dup(features, &spa->spa_label_features, 0) == 0); } VERIFY(nvlist_dup(config, &spa->spa_config, 0) == 0); } if (spa->spa_label_features == NULL) { VERIFY(nvlist_alloc(&spa->spa_label_features, NV_UNIQUE_NAME, KM_SLEEP) == 0); } spa->spa_min_ashift = INT_MAX; spa->spa_max_ashift = 0; spa->spa_min_alloc = INT_MAX; spa->spa_gcd_alloc = INT_MAX; /* Reset cached value */ spa->spa_dedup_dspace = ~0ULL; /* * As a pool is being created, treat all features as disabled by * setting SPA_FEATURE_DISABLED for all entries in the feature * refcount cache. */ for (int i = 0; i < SPA_FEATURES; i++) { spa->spa_feat_refcount_cache[i] = SPA_FEATURE_DISABLED; } list_create(&spa->spa_leaf_list, sizeof (vdev_t), offsetof(vdev_t, vdev_leaf_node)); return (spa); } /* * Removes a spa_t from the namespace, freeing up any memory used. Requires * spa_namespace_lock. This is called only after the spa_t has been closed and * deactivated. */ void spa_remove(spa_t *spa) { spa_config_dirent_t *dp; ASSERT(MUTEX_HELD(&spa_namespace_lock)); ASSERT(spa_state(spa) == POOL_STATE_UNINITIALIZED); ASSERT3U(zfs_refcount_count(&spa->spa_refcount), ==, 0); ASSERT0(spa->spa_waiters); nvlist_free(spa->spa_config_splitting); avl_remove(&spa_namespace_avl, spa); if (spa->spa_root) spa_strfree(spa->spa_root); while ((dp = list_remove_head(&spa->spa_config_list)) != NULL) { if (dp->scd_path != NULL) spa_strfree(dp->scd_path); kmem_free(dp, sizeof (spa_config_dirent_t)); } for (int i = 0; i < spa->spa_alloc_count; i++) { avl_destroy(&spa->spa_allocs[i].spaa_tree); mutex_destroy(&spa->spa_allocs[i].spaa_lock); } kmem_free(spa->spa_allocs, spa->spa_alloc_count * sizeof (spa_alloc_t)); if (spa->spa_alloc_count > 1) { mutex_destroy(&spa->spa_allocs_use->sau_lock); kmem_free(spa->spa_allocs_use, offsetof(spa_allocs_use_t, sau_inuse[spa->spa_alloc_count])); } avl_destroy(&spa->spa_metaslabs_by_flushed); avl_destroy(&spa->spa_sm_logs_by_txg); list_destroy(&spa->spa_log_summary); list_destroy(&spa->spa_config_list); list_destroy(&spa->spa_leaf_list); nvlist_free(spa->spa_label_features); nvlist_free(spa->spa_load_info); nvlist_free(spa->spa_feat_stats); spa_config_set(spa, NULL); zfs_refcount_destroy(&spa->spa_refcount); spa_stats_destroy(spa); spa_config_lock_destroy(spa); for (int t = 0; t < TXG_SIZE; t++) bplist_destroy(&spa->spa_free_bplist[t]); zio_checksum_templates_free(spa); cv_destroy(&spa->spa_async_cv); cv_destroy(&spa->spa_evicting_os_cv); cv_destroy(&spa->spa_proc_cv); cv_destroy(&spa->spa_scrub_io_cv); cv_destroy(&spa->spa_suspend_cv); cv_destroy(&spa->spa_activities_cv); cv_destroy(&spa->spa_waiters_cv); mutex_destroy(&spa->spa_flushed_ms_lock); mutex_destroy(&spa->spa_async_lock); mutex_destroy(&spa->spa_errlist_lock); mutex_destroy(&spa->spa_errlog_lock); mutex_destroy(&spa->spa_evicting_os_lock); mutex_destroy(&spa->spa_history_lock); mutex_destroy(&spa->spa_proc_lock); mutex_destroy(&spa->spa_props_lock); mutex_destroy(&spa->spa_cksum_tmpls_lock); mutex_destroy(&spa->spa_scrub_lock); mutex_destroy(&spa->spa_suspend_lock); mutex_destroy(&spa->spa_vdev_top_lock); mutex_destroy(&spa->spa_feat_stats_lock); mutex_destroy(&spa->spa_activities_lock); kmem_free(spa, sizeof (spa_t)); } /* * Given a pool, return the next pool in the namespace, or NULL if there is * none. If 'prev' is NULL, return the first pool. */ spa_t * spa_next(spa_t *prev) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); if (prev) return (AVL_NEXT(&spa_namespace_avl, prev)); else return (avl_first(&spa_namespace_avl)); } /* * ========================================================================== * SPA refcount functions * ========================================================================== */ /* * Add a reference to the given spa_t. Must have at least one reference, or * have the namespace lock held. */ void spa_open_ref(spa_t *spa, const void *tag) { ASSERT(zfs_refcount_count(&spa->spa_refcount) >= spa->spa_minref || MUTEX_HELD(&spa_namespace_lock) || spa->spa_load_thread == curthread); (void) zfs_refcount_add(&spa->spa_refcount, tag); } /* * Remove a reference to the given spa_t. Must have at least one reference, or * have the namespace lock held or be part of a pool import/export. */ void spa_close(spa_t *spa, const void *tag) { ASSERT(zfs_refcount_count(&spa->spa_refcount) > spa->spa_minref || MUTEX_HELD(&spa_namespace_lock) || spa->spa_load_thread == curthread || spa->spa_export_thread == curthread); (void) zfs_refcount_remove(&spa->spa_refcount, tag); } /* * Remove a reference to the given spa_t held by a dsl dir that is * being asynchronously released. Async releases occur from a taskq * performing eviction of dsl datasets and dirs. The namespace lock * isn't held and the hold by the object being evicted may contribute to * spa_minref (e.g. dataset or directory released during pool export), * so the asserts in spa_close() do not apply. */ void spa_async_close(spa_t *spa, const void *tag) { (void) zfs_refcount_remove(&spa->spa_refcount, tag); } /* * Check to see if the spa refcount is zero. Must be called with * spa_namespace_lock held or be the spa export thread. We really * compare against spa_minref, which is the number of references * acquired when opening a pool */ boolean_t spa_refcount_zero(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock) || spa->spa_export_thread == curthread); return (zfs_refcount_count(&spa->spa_refcount) == spa->spa_minref); } /* * ========================================================================== * SPA spare and l2cache tracking * ========================================================================== */ /* * Hot spares and cache devices are tracked using the same code below, * for 'auxiliary' devices. */ typedef struct spa_aux { uint64_t aux_guid; uint64_t aux_pool; avl_node_t aux_avl; int aux_count; } spa_aux_t; static inline int spa_aux_compare(const void *a, const void *b) { const spa_aux_t *sa = (const spa_aux_t *)a; const spa_aux_t *sb = (const spa_aux_t *)b; return (TREE_CMP(sa->aux_guid, sb->aux_guid)); } static void spa_aux_add(vdev_t *vd, avl_tree_t *avl) { avl_index_t where; spa_aux_t search; spa_aux_t *aux; search.aux_guid = vd->vdev_guid; if ((aux = avl_find(avl, &search, &where)) != NULL) { aux->aux_count++; } else { aux = kmem_zalloc(sizeof (spa_aux_t), KM_SLEEP); aux->aux_guid = vd->vdev_guid; aux->aux_count = 1; avl_insert(avl, aux, where); } } static void spa_aux_remove(vdev_t *vd, avl_tree_t *avl) { spa_aux_t search; spa_aux_t *aux; avl_index_t where; search.aux_guid = vd->vdev_guid; aux = avl_find(avl, &search, &where); ASSERT(aux != NULL); if (--aux->aux_count == 0) { avl_remove(avl, aux); kmem_free(aux, sizeof (spa_aux_t)); } else if (aux->aux_pool == spa_guid(vd->vdev_spa)) { aux->aux_pool = 0ULL; } } static boolean_t spa_aux_exists(uint64_t guid, uint64_t *pool, int *refcnt, avl_tree_t *avl) { spa_aux_t search, *found; search.aux_guid = guid; found = avl_find(avl, &search, NULL); if (pool) { if (found) *pool = found->aux_pool; else *pool = 0ULL; } if (refcnt) { if (found) *refcnt = found->aux_count; else *refcnt = 0; } return (found != NULL); } static void spa_aux_activate(vdev_t *vd, avl_tree_t *avl) { spa_aux_t search, *found; avl_index_t where; search.aux_guid = vd->vdev_guid; found = avl_find(avl, &search, &where); ASSERT(found != NULL); ASSERT(found->aux_pool == 0ULL); found->aux_pool = spa_guid(vd->vdev_spa); } /* * Spares are tracked globally due to the following constraints: * * - A spare may be part of multiple pools. * - A spare may be added to a pool even if it's actively in use within * another pool. * - A spare in use in any pool can only be the source of a replacement if * the target is a spare in the same pool. * * We keep track of all spares on the system through the use of a reference * counted AVL tree. When a vdev is added as a spare, or used as a replacement * spare, then we bump the reference count in the AVL tree. In addition, we set * the 'vdev_isspare' member to indicate that the device is a spare (active or * inactive). When a spare is made active (used to replace a device in the * pool), we also keep track of which pool its been made a part of. * * The 'spa_spare_lock' protects the AVL tree. These functions are normally * called under the spa_namespace lock as part of vdev reconfiguration. The * separate spare lock exists for the status query path, which does not need to * be completely consistent with respect to other vdev configuration changes. */ static int spa_spare_compare(const void *a, const void *b) { return (spa_aux_compare(a, b)); } void spa_spare_add(vdev_t *vd) { mutex_enter(&spa_spare_lock); ASSERT(!vd->vdev_isspare); spa_aux_add(vd, &spa_spare_avl); vd->vdev_isspare = B_TRUE; mutex_exit(&spa_spare_lock); } void spa_spare_remove(vdev_t *vd) { mutex_enter(&spa_spare_lock); ASSERT(vd->vdev_isspare); spa_aux_remove(vd, &spa_spare_avl); vd->vdev_isspare = B_FALSE; mutex_exit(&spa_spare_lock); } boolean_t spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt) { boolean_t found; mutex_enter(&spa_spare_lock); found = spa_aux_exists(guid, pool, refcnt, &spa_spare_avl); mutex_exit(&spa_spare_lock); return (found); } void spa_spare_activate(vdev_t *vd) { mutex_enter(&spa_spare_lock); ASSERT(vd->vdev_isspare); spa_aux_activate(vd, &spa_spare_avl); mutex_exit(&spa_spare_lock); } /* * Level 2 ARC devices are tracked globally for the same reasons as spares. * Cache devices currently only support one pool per cache device, and so * for these devices the aux reference count is currently unused beyond 1. */ static int spa_l2cache_compare(const void *a, const void *b) { return (spa_aux_compare(a, b)); } void spa_l2cache_add(vdev_t *vd) { mutex_enter(&spa_l2cache_lock); ASSERT(!vd->vdev_isl2cache); spa_aux_add(vd, &spa_l2cache_avl); vd->vdev_isl2cache = B_TRUE; mutex_exit(&spa_l2cache_lock); } void spa_l2cache_remove(vdev_t *vd) { mutex_enter(&spa_l2cache_lock); ASSERT(vd->vdev_isl2cache); spa_aux_remove(vd, &spa_l2cache_avl); vd->vdev_isl2cache = B_FALSE; mutex_exit(&spa_l2cache_lock); } boolean_t spa_l2cache_exists(uint64_t guid, uint64_t *pool) { boolean_t found; mutex_enter(&spa_l2cache_lock); found = spa_aux_exists(guid, pool, NULL, &spa_l2cache_avl); mutex_exit(&spa_l2cache_lock); return (found); } void spa_l2cache_activate(vdev_t *vd) { mutex_enter(&spa_l2cache_lock); ASSERT(vd->vdev_isl2cache); spa_aux_activate(vd, &spa_l2cache_avl); mutex_exit(&spa_l2cache_lock); } /* * ========================================================================== * SPA vdev locking * ========================================================================== */ /* * Lock the given spa_t for the purpose of adding or removing a vdev. * Grabs the global spa_namespace_lock plus the spa config lock for writing. * It returns the next transaction group for the spa_t. */ uint64_t spa_vdev_enter(spa_t *spa) { mutex_enter(&spa->spa_vdev_top_lock); mutex_enter(&spa_namespace_lock); ASSERT0(spa->spa_export_thread); vdev_autotrim_stop_all(spa); return (spa_vdev_config_enter(spa)); } /* * The same as spa_vdev_enter() above but additionally takes the guid of * the vdev being detached. When there is a rebuild in process it will be * suspended while the vdev tree is modified then resumed by spa_vdev_exit(). * The rebuild is canceled if only a single child remains after the detach. */ uint64_t spa_vdev_detach_enter(spa_t *spa, uint64_t guid) { mutex_enter(&spa->spa_vdev_top_lock); mutex_enter(&spa_namespace_lock); ASSERT0(spa->spa_export_thread); vdev_autotrim_stop_all(spa); if (guid != 0) { vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE); if (vd) { vdev_rebuild_stop_wait(vd->vdev_top); } } return (spa_vdev_config_enter(spa)); } /* * Internal implementation for spa_vdev_enter(). Used when a vdev * operation requires multiple syncs (i.e. removing a device) while * keeping the spa_namespace_lock held. */ uint64_t spa_vdev_config_enter(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); spa_config_enter(spa, SCL_ALL, spa, RW_WRITER); return (spa_last_synced_txg(spa) + 1); } /* * Used in combination with spa_vdev_config_enter() to allow the syncing * of multiple transactions without releasing the spa_namespace_lock. */ void spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, const char *tag) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); int config_changed = B_FALSE; ASSERT(txg > spa_last_synced_txg(spa)); spa->spa_pending_vdev = NULL; /* * Reassess the DTLs. */ vdev_dtl_reassess(spa->spa_root_vdev, 0, 0, B_FALSE, B_FALSE); if (error == 0 && !list_is_empty(&spa->spa_config_dirty_list)) { config_changed = B_TRUE; spa->spa_config_generation++; } /* * Verify the metaslab classes. */ ASSERT(metaslab_class_validate(spa_normal_class(spa)) == 0); ASSERT(metaslab_class_validate(spa_log_class(spa)) == 0); ASSERT(metaslab_class_validate(spa_embedded_log_class(spa)) == 0); ASSERT(metaslab_class_validate(spa_special_class(spa)) == 0); ASSERT(metaslab_class_validate(spa_dedup_class(spa)) == 0); spa_config_exit(spa, SCL_ALL, spa); /* * Panic the system if the specified tag requires it. This * is useful for ensuring that configurations are updated * transactionally. */ if (zio_injection_enabled) zio_handle_panic_injection(spa, tag, 0); /* * Note: this txg_wait_synced() is important because it ensures * that there won't be more than one config change per txg. * This allows us to use the txg as the generation number. */ if (error == 0) txg_wait_synced(spa->spa_dsl_pool, txg); if (vd != NULL) { ASSERT(!vd->vdev_detached || vd->vdev_dtl_sm == NULL); if (vd->vdev_ops->vdev_op_leaf) { mutex_enter(&vd->vdev_initialize_lock); vdev_initialize_stop(vd, VDEV_INITIALIZE_CANCELED, NULL); mutex_exit(&vd->vdev_initialize_lock); mutex_enter(&vd->vdev_trim_lock); vdev_trim_stop(vd, VDEV_TRIM_CANCELED, NULL); mutex_exit(&vd->vdev_trim_lock); } /* * The vdev may be both a leaf and top-level device. */ vdev_autotrim_stop_wait(vd); spa_config_enter(spa, SCL_STATE_ALL, spa, RW_WRITER); vdev_free(vd); spa_config_exit(spa, SCL_STATE_ALL, spa); } /* * If the config changed, update the config cache. */ if (config_changed) spa_write_cachefile(spa, B_FALSE, B_TRUE, B_TRUE); } /* * Unlock the spa_t after adding or removing a vdev. Besides undoing the * locking of spa_vdev_enter(), we also want make sure the transactions have * synced to disk, and then update the global configuration cache with the new * information. */ int spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error) { vdev_autotrim_restart(spa); vdev_rebuild_restart(spa); spa_vdev_config_exit(spa, vd, txg, error, FTAG); mutex_exit(&spa_namespace_lock); mutex_exit(&spa->spa_vdev_top_lock); return (error); } /* * Lock the given spa_t for the purpose of changing vdev state. */ void spa_vdev_state_enter(spa_t *spa, int oplocks) { int locks = SCL_STATE_ALL | oplocks; /* * Root pools may need to read of the underlying devfs filesystem * when opening up a vdev. Unfortunately if we're holding the * SCL_ZIO lock it will result in a deadlock when we try to issue * the read from the root filesystem. Instead we "prefetch" * the associated vnodes that we need prior to opening the * underlying devices and cache them so that we can prevent * any I/O when we are doing the actual open. */ if (spa_is_root(spa)) { int low = locks & ~(SCL_ZIO - 1); int high = locks & ~low; spa_config_enter(spa, high, spa, RW_WRITER); vdev_hold(spa->spa_root_vdev); spa_config_enter(spa, low, spa, RW_WRITER); } else { spa_config_enter(spa, locks, spa, RW_WRITER); } spa->spa_vdev_locks = locks; } int spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error) { boolean_t config_changed = B_FALSE; vdev_t *vdev_top; if (vd == NULL || vd == spa->spa_root_vdev) { vdev_top = spa->spa_root_vdev; } else { vdev_top = vd->vdev_top; } if (vd != NULL || error == 0) vdev_dtl_reassess(vdev_top, 0, 0, B_FALSE, B_FALSE); if (vd != NULL) { if (vd != spa->spa_root_vdev) vdev_state_dirty(vdev_top); config_changed = B_TRUE; spa->spa_config_generation++; } if (spa_is_root(spa)) vdev_rele(spa->spa_root_vdev); ASSERT3U(spa->spa_vdev_locks, >=, SCL_STATE_ALL); spa_config_exit(spa, spa->spa_vdev_locks, spa); /* * If anything changed, wait for it to sync. This ensures that, * from the system administrator's perspective, zpool(8) commands * are synchronous. This is important for things like zpool offline: * when the command completes, you expect no further I/O from ZFS. */ if (vd != NULL) txg_wait_synced(spa->spa_dsl_pool, 0); /* * If the config changed, update the config cache. */ if (config_changed) { mutex_enter(&spa_namespace_lock); spa_write_cachefile(spa, B_FALSE, B_TRUE, B_FALSE); mutex_exit(&spa_namespace_lock); } return (error); } /* * ========================================================================== * Miscellaneous functions * ========================================================================== */ void spa_activate_mos_feature(spa_t *spa, const char *feature, dmu_tx_t *tx) { if (!nvlist_exists(spa->spa_label_features, feature)) { fnvlist_add_boolean(spa->spa_label_features, feature); /* * When we are creating the pool (tx_txg==TXG_INITIAL), we can't * dirty the vdev config because lock SCL_CONFIG is not held. * Thankfully, in this case we don't need to dirty the config * because it will be written out anyway when we finish * creating the pool. */ if (tx->tx_txg != TXG_INITIAL) vdev_config_dirty(spa->spa_root_vdev); } } void spa_deactivate_mos_feature(spa_t *spa, const char *feature) { if (nvlist_remove_all(spa->spa_label_features, feature) == 0) vdev_config_dirty(spa->spa_root_vdev); } /* * Return the spa_t associated with given pool_guid, if it exists. If * device_guid is non-zero, determine whether the pool exists *and* contains * a device with the specified device_guid. */ spa_t * spa_by_guid(uint64_t pool_guid, uint64_t device_guid) { spa_t *spa; avl_tree_t *t = &spa_namespace_avl; ASSERT(MUTEX_HELD(&spa_namespace_lock)); for (spa = avl_first(t); spa != NULL; spa = AVL_NEXT(t, spa)) { if (spa->spa_state == POOL_STATE_UNINITIALIZED) continue; if (spa->spa_root_vdev == NULL) continue; if (spa_guid(spa) == pool_guid) { if (device_guid == 0) break; if (vdev_lookup_by_guid(spa->spa_root_vdev, device_guid) != NULL) break; /* * Check any devices we may be in the process of adding. */ if (spa->spa_pending_vdev) { if (vdev_lookup_by_guid(spa->spa_pending_vdev, device_guid) != NULL) break; } } } return (spa); } /* * Determine whether a pool with the given pool_guid exists. */ boolean_t spa_guid_exists(uint64_t pool_guid, uint64_t device_guid) { return (spa_by_guid(pool_guid, device_guid) != NULL); } char * spa_strdup(const char *s) { size_t len; char *new; len = strlen(s); new = kmem_alloc(len + 1, KM_SLEEP); memcpy(new, s, len + 1); return (new); } void spa_strfree(char *s) { kmem_free(s, strlen(s) + 1); } uint64_t spa_generate_guid(spa_t *spa) { uint64_t guid; if (spa != NULL) { do { (void) random_get_pseudo_bytes((void *)&guid, sizeof (guid)); } while (guid == 0 || spa_guid_exists(spa_guid(spa), guid)); } else { do { (void) random_get_pseudo_bytes((void *)&guid, sizeof (guid)); } while (guid == 0 || spa_guid_exists(guid, 0)); } return (guid); } void snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp) { char type[256]; const char *checksum = NULL; const char *compress = NULL; if (bp != NULL) { if (BP_GET_TYPE(bp) & DMU_OT_NEWTYPE) { dmu_object_byteswap_t bswap = DMU_OT_BYTESWAP(BP_GET_TYPE(bp)); (void) snprintf(type, sizeof (type), "bswap %s %s", DMU_OT_IS_METADATA(BP_GET_TYPE(bp)) ? "metadata" : "data", dmu_ot_byteswap[bswap].ob_name); } else { (void) strlcpy(type, dmu_ot[BP_GET_TYPE(bp)].ot_name, sizeof (type)); } if (!BP_IS_EMBEDDED(bp)) { checksum = zio_checksum_table[BP_GET_CHECKSUM(bp)].ci_name; } compress = zio_compress_table[BP_GET_COMPRESS(bp)].ci_name; } SNPRINTF_BLKPTR(kmem_scnprintf, ' ', buf, buflen, bp, type, checksum, compress); } void spa_freeze(spa_t *spa) { uint64_t freeze_txg = 0; spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); if (spa->spa_freeze_txg == UINT64_MAX) { freeze_txg = spa_last_synced_txg(spa) + TXG_SIZE; spa->spa_freeze_txg = freeze_txg; } spa_config_exit(spa, SCL_ALL, FTAG); if (freeze_txg != 0) txg_wait_synced(spa_get_dsl(spa), freeze_txg); } void zfs_panic_recover(const char *fmt, ...) { va_list adx; va_start(adx, fmt); vcmn_err(zfs_recover ? CE_WARN : CE_PANIC, fmt, adx); va_end(adx); } /* * This is a stripped-down version of strtoull, suitable only for converting * lowercase hexadecimal numbers that don't overflow. */ uint64_t zfs_strtonum(const char *str, char **nptr) { uint64_t val = 0; char c; int digit; while ((c = *str) != '\0') { if (c >= '0' && c <= '9') digit = c - '0'; else if (c >= 'a' && c <= 'f') digit = 10 + c - 'a'; else break; val *= 16; val += digit; str++; } if (nptr) *nptr = (char *)str; return (val); } void spa_activate_allocation_classes(spa_t *spa, dmu_tx_t *tx) { /* * We bump the feature refcount for each special vdev added to the pool */ ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_ALLOCATION_CLASSES)); spa_feature_incr(spa, SPA_FEATURE_ALLOCATION_CLASSES, tx); } /* * ========================================================================== * Accessor functions * ========================================================================== */ boolean_t spa_shutting_down(spa_t *spa) { return (spa->spa_async_suspended); } dsl_pool_t * spa_get_dsl(spa_t *spa) { return (spa->spa_dsl_pool); } boolean_t spa_is_initializing(spa_t *spa) { return (spa->spa_is_initializing); } boolean_t spa_indirect_vdevs_loaded(spa_t *spa) { return (spa->spa_indirect_vdevs_loaded); } blkptr_t * spa_get_rootblkptr(spa_t *spa) { return (&spa->spa_ubsync.ub_rootbp); } void spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp) { spa->spa_uberblock.ub_rootbp = *bp; } void spa_altroot(spa_t *spa, char *buf, size_t buflen) { if (spa->spa_root == NULL) buf[0] = '\0'; else (void) strlcpy(buf, spa->spa_root, buflen); } uint32_t spa_sync_pass(spa_t *spa) { return (spa->spa_sync_pass); } char * spa_name(spa_t *spa) { return (spa->spa_name); } uint64_t spa_guid(spa_t *spa) { dsl_pool_t *dp = spa_get_dsl(spa); uint64_t guid; /* * If we fail to parse the config during spa_load(), we can go through * the error path (which posts an ereport) and end up here with no root * vdev. We stash the original pool guid in 'spa_config_guid' to handle * this case. */ if (spa->spa_root_vdev == NULL) return (spa->spa_config_guid); guid = spa->spa_last_synced_guid != 0 ? spa->spa_last_synced_guid : spa->spa_root_vdev->vdev_guid; /* * Return the most recently synced out guid unless we're * in syncing context. */ if (dp && dsl_pool_sync_context(dp)) return (spa->spa_root_vdev->vdev_guid); else return (guid); } uint64_t spa_load_guid(spa_t *spa) { /* * This is a GUID that exists solely as a reference for the * purposes of the arc. It is generated at load time, and * is never written to persistent storage. */ return (spa->spa_load_guid); } uint64_t spa_last_synced_txg(spa_t *spa) { return (spa->spa_ubsync.ub_txg); } uint64_t spa_first_txg(spa_t *spa) { return (spa->spa_first_txg); } uint64_t spa_syncing_txg(spa_t *spa) { return (spa->spa_syncing_txg); } /* * Return the last txg where data can be dirtied. The final txgs * will be used to just clear out any deferred frees that remain. */ uint64_t spa_final_dirty_txg(spa_t *spa) { return (spa->spa_final_txg - TXG_DEFER_SIZE); } pool_state_t spa_state(spa_t *spa) { return (spa->spa_state); } spa_load_state_t spa_load_state(spa_t *spa) { return (spa->spa_load_state); } uint64_t spa_freeze_txg(spa_t *spa) { return (spa->spa_freeze_txg); } /* * Return the inflated asize for a logical write in bytes. This is used by the * DMU to calculate the space a logical write will require on disk. * If lsize is smaller than the largest physical block size allocatable on this * pool we use its value instead, since the write will end up using the whole * block anyway. */ uint64_t spa_get_worst_case_asize(spa_t *spa, uint64_t lsize) { if (lsize == 0) return (0); /* No inflation needed */ return (MAX(lsize, 1 << spa->spa_max_ashift) * spa_asize_inflation); } /* * Return the amount of slop space in bytes. It is typically 1/32 of the pool * (3.2%), minus the embedded log space. On very small pools, it may be * slightly larger than this. On very large pools, it will be capped to * the value of spa_max_slop. The embedded log space is not included in * spa_dspace. By subtracting it, the usable space (per "zfs list") is a * constant 97% of the total space, regardless of metaslab size (assuming the * default spa_slop_shift=5 and a non-tiny pool). * * See the comment above spa_slop_shift for more details. */ uint64_t spa_get_slop_space(spa_t *spa) { uint64_t space = 0; uint64_t slop = 0; /* * Make sure spa_dedup_dspace has been set. */ if (spa->spa_dedup_dspace == ~0ULL) spa_update_dspace(spa); /* * spa_get_dspace() includes the space only logically "used" by * deduplicated data, so since it's not useful to reserve more * space with more deduplicated data, we subtract that out here. */ space = spa_get_dspace(spa) - spa->spa_dedup_dspace - brt_get_dspace(spa); slop = MIN(space >> spa_slop_shift, spa_max_slop); /* * Subtract the embedded log space, but no more than half the (3.2%) * unusable space. Note, the "no more than half" is only relevant if * zfs_embedded_slog_min_ms >> spa_slop_shift < 2, which is not true by * default. */ uint64_t embedded_log = metaslab_class_get_dspace(spa_embedded_log_class(spa)); slop -= MIN(embedded_log, slop >> 1); /* * Slop space should be at least spa_min_slop, but no more than half * the entire pool. */ slop = MAX(slop, MIN(space >> 1, spa_min_slop)); return (slop); } uint64_t spa_get_dspace(spa_t *spa) { return (spa->spa_dspace); } uint64_t spa_get_checkpoint_space(spa_t *spa) { return (spa->spa_checkpoint_info.sci_dspace); } void spa_update_dspace(spa_t *spa) { spa->spa_dspace = metaslab_class_get_dspace(spa_normal_class(spa)) + ddt_get_dedup_dspace(spa) + brt_get_dspace(spa); if (spa->spa_nonallocating_dspace > 0) { /* * Subtract the space provided by all non-allocating vdevs that * contribute to dspace. If a file is overwritten, its old * blocks are freed and new blocks are allocated. If there are * no snapshots of the file, the available space should remain * the same. The old blocks could be freed from the * non-allocating vdev, but the new blocks must be allocated on * other (allocating) vdevs. By reserving the entire size of * the non-allocating vdevs (including allocated space), we * ensure that there will be enough space on the allocating * vdevs for this file overwrite to succeed. * * Note that the DMU/DSL doesn't actually know or care * how much space is allocated (it does its own tracking * of how much space has been logically used). So it * doesn't matter that the data we are moving may be * allocated twice (on the old device and the new device). */ ASSERT3U(spa->spa_dspace, >=, spa->spa_nonallocating_dspace); spa->spa_dspace -= spa->spa_nonallocating_dspace; } } /* * Return the failure mode that has been set to this pool. The default * behavior will be to block all I/Os when a complete failure occurs. */ uint64_t spa_get_failmode(spa_t *spa) { return (spa->spa_failmode); } boolean_t spa_suspended(spa_t *spa) { return (spa->spa_suspended != ZIO_SUSPEND_NONE); } uint64_t spa_version(spa_t *spa) { return (spa->spa_ubsync.ub_version); } boolean_t spa_deflate(spa_t *spa) { return (spa->spa_deflate); } metaslab_class_t * spa_normal_class(spa_t *spa) { return (spa->spa_normal_class); } metaslab_class_t * spa_log_class(spa_t *spa) { return (spa->spa_log_class); } metaslab_class_t * spa_embedded_log_class(spa_t *spa) { return (spa->spa_embedded_log_class); } metaslab_class_t * spa_special_class(spa_t *spa) { return (spa->spa_special_class); } metaslab_class_t * spa_dedup_class(spa_t *spa) { return (spa->spa_dedup_class); } +boolean_t +spa_special_has_ddt(spa_t *spa) +{ + return (zfs_ddt_data_is_special && + spa->spa_special_class->mc_groups != 0); +} + /* * Locate an appropriate allocation class */ metaslab_class_t * spa_preferred_class(spa_t *spa, uint64_t size, dmu_object_type_t objtype, uint_t level, uint_t special_smallblk) { /* * ZIL allocations determine their class in zio_alloc_zil(). */ ASSERT(objtype != DMU_OT_INTENT_LOG); boolean_t has_special_class = spa->spa_special_class->mc_groups != 0; if (DMU_OT_IS_DDT(objtype)) { if (spa->spa_dedup_class->mc_groups != 0) return (spa_dedup_class(spa)); else if (has_special_class && zfs_ddt_data_is_special) return (spa_special_class(spa)); else return (spa_normal_class(spa)); } /* Indirect blocks for user data can land in special if allowed */ if (level > 0 && (DMU_OT_IS_FILE(objtype) || objtype == DMU_OT_ZVOL)) { if (has_special_class && zfs_user_indirect_is_special) return (spa_special_class(spa)); else return (spa_normal_class(spa)); } if (DMU_OT_IS_METADATA(objtype) || level > 0) { if (has_special_class) return (spa_special_class(spa)); else return (spa_normal_class(spa)); } /* * Allow small file blocks in special class in some cases (like * for the dRAID vdev feature). But always leave a reserve of * zfs_special_class_metadata_reserve_pct exclusively for metadata. */ if (DMU_OT_IS_FILE(objtype) && has_special_class && size <= special_smallblk) { metaslab_class_t *special = spa_special_class(spa); uint64_t alloc = metaslab_class_get_alloc(special); uint64_t space = metaslab_class_get_space(special); uint64_t limit = (space * (100 - zfs_special_class_metadata_reserve_pct)) / 100; if (alloc < limit) return (special); } return (spa_normal_class(spa)); } void spa_evicting_os_register(spa_t *spa, objset_t *os) { mutex_enter(&spa->spa_evicting_os_lock); list_insert_head(&spa->spa_evicting_os_list, os); mutex_exit(&spa->spa_evicting_os_lock); } void spa_evicting_os_deregister(spa_t *spa, objset_t *os) { mutex_enter(&spa->spa_evicting_os_lock); list_remove(&spa->spa_evicting_os_list, os); cv_broadcast(&spa->spa_evicting_os_cv); mutex_exit(&spa->spa_evicting_os_lock); } void spa_evicting_os_wait(spa_t *spa) { mutex_enter(&spa->spa_evicting_os_lock); while (!list_is_empty(&spa->spa_evicting_os_list)) cv_wait(&spa->spa_evicting_os_cv, &spa->spa_evicting_os_lock); mutex_exit(&spa->spa_evicting_os_lock); dmu_buf_user_evict_wait(); } int spa_max_replication(spa_t *spa) { /* * As of SPA_VERSION == SPA_VERSION_DITTO_BLOCKS, we are able to * handle BPs with more than one DVA allocated. Set our max * replication level accordingly. */ if (spa_version(spa) < SPA_VERSION_DITTO_BLOCKS) return (1); return (MIN(SPA_DVAS_PER_BP, spa_max_replication_override)); } int spa_prev_software_version(spa_t *spa) { return (spa->spa_prev_software_version); } uint64_t spa_deadman_synctime(spa_t *spa) { return (spa->spa_deadman_synctime); } spa_autotrim_t spa_get_autotrim(spa_t *spa) { return (spa->spa_autotrim); } uint64_t spa_deadman_ziotime(spa_t *spa) { return (spa->spa_deadman_ziotime); } uint64_t spa_get_deadman_failmode(spa_t *spa) { return (spa->spa_deadman_failmode); } void spa_set_deadman_failmode(spa_t *spa, const char *failmode) { if (strcmp(failmode, "wait") == 0) spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT; else if (strcmp(failmode, "continue") == 0) spa->spa_deadman_failmode = ZIO_FAILURE_MODE_CONTINUE; else if (strcmp(failmode, "panic") == 0) spa->spa_deadman_failmode = ZIO_FAILURE_MODE_PANIC; else spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT; } void spa_set_deadman_ziotime(hrtime_t ns) { spa_t *spa = NULL; if (spa_mode_global != SPA_MODE_UNINIT) { mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa)) != NULL) spa->spa_deadman_ziotime = ns; mutex_exit(&spa_namespace_lock); } } void spa_set_deadman_synctime(hrtime_t ns) { spa_t *spa = NULL; if (spa_mode_global != SPA_MODE_UNINIT) { mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa)) != NULL) spa->spa_deadman_synctime = ns; mutex_exit(&spa_namespace_lock); } } uint64_t dva_get_dsize_sync(spa_t *spa, const dva_t *dva) { uint64_t asize = DVA_GET_ASIZE(dva); uint64_t dsize = asize; ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0); if (asize != 0 && spa->spa_deflate) { vdev_t *vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva)); if (vd != NULL) dsize = (asize >> SPA_MINBLOCKSHIFT) * vd->vdev_deflate_ratio; } return (dsize); } uint64_t bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp) { uint64_t dsize = 0; for (int d = 0; d < BP_GET_NDVAS(bp); d++) dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]); return (dsize); } uint64_t bp_get_dsize(spa_t *spa, const blkptr_t *bp) { uint64_t dsize = 0; spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); for (int d = 0; d < BP_GET_NDVAS(bp); d++) dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]); spa_config_exit(spa, SCL_VDEV, FTAG); return (dsize); } uint64_t spa_dirty_data(spa_t *spa) { return (spa->spa_dsl_pool->dp_dirty_total); } /* * ========================================================================== * SPA Import Progress Routines * ========================================================================== */ typedef struct spa_import_progress { uint64_t pool_guid; /* unique id for updates */ char *pool_name; spa_load_state_t spa_load_state; char *spa_load_notes; uint64_t mmp_sec_remaining; /* MMP activity check */ uint64_t spa_load_max_txg; /* rewind txg */ procfs_list_node_t smh_node; } spa_import_progress_t; spa_history_list_t *spa_import_progress_list = NULL; static int spa_import_progress_show_header(struct seq_file *f) { seq_printf(f, "%-20s %-14s %-14s %-12s %-16s %s\n", "pool_guid", "load_state", "multihost_secs", "max_txg", "pool_name", "notes"); return (0); } static int spa_import_progress_show(struct seq_file *f, void *data) { spa_import_progress_t *sip = (spa_import_progress_t *)data; seq_printf(f, "%-20llu %-14llu %-14llu %-12llu %-16s %s\n", (u_longlong_t)sip->pool_guid, (u_longlong_t)sip->spa_load_state, (u_longlong_t)sip->mmp_sec_remaining, (u_longlong_t)sip->spa_load_max_txg, (sip->pool_name ? sip->pool_name : "-"), (sip->spa_load_notes ? sip->spa_load_notes : "-")); return (0); } /* Remove oldest elements from list until there are no more than 'size' left */ static void spa_import_progress_truncate(spa_history_list_t *shl, unsigned int size) { spa_import_progress_t *sip; while (shl->size > size) { sip = list_remove_head(&shl->procfs_list.pl_list); if (sip->pool_name) spa_strfree(sip->pool_name); if (sip->spa_load_notes) kmem_strfree(sip->spa_load_notes); kmem_free(sip, sizeof (spa_import_progress_t)); shl->size--; } IMPLY(size == 0, list_is_empty(&shl->procfs_list.pl_list)); } static void spa_import_progress_init(void) { spa_import_progress_list = kmem_zalloc(sizeof (spa_history_list_t), KM_SLEEP); spa_import_progress_list->size = 0; spa_import_progress_list->procfs_list.pl_private = spa_import_progress_list; procfs_list_install("zfs", NULL, "import_progress", 0644, &spa_import_progress_list->procfs_list, spa_import_progress_show, spa_import_progress_show_header, NULL, offsetof(spa_import_progress_t, smh_node)); } static void spa_import_progress_destroy(void) { spa_history_list_t *shl = spa_import_progress_list; procfs_list_uninstall(&shl->procfs_list); spa_import_progress_truncate(shl, 0); procfs_list_destroy(&shl->procfs_list); kmem_free(shl, sizeof (spa_history_list_t)); } int spa_import_progress_set_state(uint64_t pool_guid, spa_load_state_t load_state) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; int error = ENOENT; if (shl->size == 0) return (0); mutex_enter(&shl->procfs_list.pl_lock); for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; sip = list_prev(&shl->procfs_list.pl_list, sip)) { if (sip->pool_guid == pool_guid) { sip->spa_load_state = load_state; if (sip->spa_load_notes != NULL) { kmem_strfree(sip->spa_load_notes); sip->spa_load_notes = NULL; } error = 0; break; } } mutex_exit(&shl->procfs_list.pl_lock); return (error); } static void spa_import_progress_set_notes_impl(spa_t *spa, boolean_t log_dbgmsg, const char *fmt, va_list adx) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; uint64_t pool_guid = spa_guid(spa); if (shl->size == 0) return; char *notes = kmem_vasprintf(fmt, adx); mutex_enter(&shl->procfs_list.pl_lock); for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; sip = list_prev(&shl->procfs_list.pl_list, sip)) { if (sip->pool_guid == pool_guid) { if (sip->spa_load_notes != NULL) { kmem_strfree(sip->spa_load_notes); sip->spa_load_notes = NULL; } sip->spa_load_notes = notes; if (log_dbgmsg) zfs_dbgmsg("'%s' %s", sip->pool_name, notes); notes = NULL; break; } } mutex_exit(&shl->procfs_list.pl_lock); if (notes != NULL) kmem_strfree(notes); } void spa_import_progress_set_notes(spa_t *spa, const char *fmt, ...) { va_list adx; va_start(adx, fmt); spa_import_progress_set_notes_impl(spa, B_TRUE, fmt, adx); va_end(adx); } void spa_import_progress_set_notes_nolog(spa_t *spa, const char *fmt, ...) { va_list adx; va_start(adx, fmt); spa_import_progress_set_notes_impl(spa, B_FALSE, fmt, adx); va_end(adx); } int spa_import_progress_set_max_txg(uint64_t pool_guid, uint64_t load_max_txg) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; int error = ENOENT; if (shl->size == 0) return (0); mutex_enter(&shl->procfs_list.pl_lock); for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; sip = list_prev(&shl->procfs_list.pl_list, sip)) { if (sip->pool_guid == pool_guid) { sip->spa_load_max_txg = load_max_txg; error = 0; break; } } mutex_exit(&shl->procfs_list.pl_lock); return (error); } int spa_import_progress_set_mmp_check(uint64_t pool_guid, uint64_t mmp_sec_remaining) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; int error = ENOENT; if (shl->size == 0) return (0); mutex_enter(&shl->procfs_list.pl_lock); for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; sip = list_prev(&shl->procfs_list.pl_list, sip)) { if (sip->pool_guid == pool_guid) { sip->mmp_sec_remaining = mmp_sec_remaining; error = 0; break; } } mutex_exit(&shl->procfs_list.pl_lock); return (error); } /* * A new import is in progress, add an entry. */ void spa_import_progress_add(spa_t *spa) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; const char *poolname = NULL; sip = kmem_zalloc(sizeof (spa_import_progress_t), KM_SLEEP); sip->pool_guid = spa_guid(spa); (void) nvlist_lookup_string(spa->spa_config, ZPOOL_CONFIG_POOL_NAME, &poolname); if (poolname == NULL) poolname = spa_name(spa); sip->pool_name = spa_strdup(poolname); sip->spa_load_state = spa_load_state(spa); sip->spa_load_notes = NULL; mutex_enter(&shl->procfs_list.pl_lock); procfs_list_add(&shl->procfs_list, sip); shl->size++; mutex_exit(&shl->procfs_list.pl_lock); } void spa_import_progress_remove(uint64_t pool_guid) { spa_history_list_t *shl = spa_import_progress_list; spa_import_progress_t *sip; mutex_enter(&shl->procfs_list.pl_lock); for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; sip = list_prev(&shl->procfs_list.pl_list, sip)) { if (sip->pool_guid == pool_guid) { if (sip->pool_name) spa_strfree(sip->pool_name); if (sip->spa_load_notes) spa_strfree(sip->spa_load_notes); list_remove(&shl->procfs_list.pl_list, sip); shl->size--; kmem_free(sip, sizeof (spa_import_progress_t)); break; } } mutex_exit(&shl->procfs_list.pl_lock); } /* * ========================================================================== * Initialization and Termination * ========================================================================== */ static int spa_name_compare(const void *a1, const void *a2) { const spa_t *s1 = a1; const spa_t *s2 = a2; int s; s = strcmp(s1->spa_name, s2->spa_name); return (TREE_ISIGN(s)); } void spa_boot_init(void) { spa_config_load(); } void spa_init(spa_mode_t mode) { mutex_init(&spa_namespace_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa_spare_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&spa_l2cache_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&spa_namespace_cv, NULL, CV_DEFAULT, NULL); avl_create(&spa_namespace_avl, spa_name_compare, sizeof (spa_t), offsetof(spa_t, spa_avl)); avl_create(&spa_spare_avl, spa_spare_compare, sizeof (spa_aux_t), offsetof(spa_aux_t, aux_avl)); avl_create(&spa_l2cache_avl, spa_l2cache_compare, sizeof (spa_aux_t), offsetof(spa_aux_t, aux_avl)); spa_mode_global = mode; #ifndef _KERNEL if (spa_mode_global != SPA_MODE_READ && dprintf_find_string("watch")) { struct sigaction sa; sa.sa_flags = SA_SIGINFO; sigemptyset(&sa.sa_mask); sa.sa_sigaction = arc_buf_sigsegv; if (sigaction(SIGSEGV, &sa, NULL) == -1) { perror("could not enable watchpoints: " "sigaction(SIGSEGV, ...) = "); } else { arc_watch = B_TRUE; } } #endif fm_init(); zfs_refcount_init(); unique_init(); zfs_btree_init(); metaslab_stat_init(); brt_init(); ddt_init(); zio_init(); dmu_init(); zil_init(); vdev_mirror_stat_init(); vdev_raidz_math_init(); vdev_file_init(); zfs_prop_init(); chksum_init(); zpool_prop_init(); zpool_feature_init(); spa_config_load(); vdev_prop_init(); l2arc_start(); scan_init(); qat_init(); spa_import_progress_init(); } void spa_fini(void) { l2arc_stop(); spa_evict_all(); vdev_file_fini(); vdev_mirror_stat_fini(); vdev_raidz_math_fini(); chksum_fini(); zil_fini(); dmu_fini(); zio_fini(); ddt_fini(); brt_fini(); metaslab_stat_fini(); zfs_btree_fini(); unique_fini(); zfs_refcount_fini(); fm_fini(); scan_fini(); qat_fini(); spa_import_progress_destroy(); avl_destroy(&spa_namespace_avl); avl_destroy(&spa_spare_avl); avl_destroy(&spa_l2cache_avl); cv_destroy(&spa_namespace_cv); mutex_destroy(&spa_namespace_lock); mutex_destroy(&spa_spare_lock); mutex_destroy(&spa_l2cache_lock); } /* * Return whether this pool has a dedicated slog device. No locking needed. * It's not a problem if the wrong answer is returned as it's only for * performance and not correctness. */ boolean_t spa_has_slogs(spa_t *spa) { return (spa->spa_log_class->mc_groups != 0); } spa_log_state_t spa_get_log_state(spa_t *spa) { return (spa->spa_log_state); } void spa_set_log_state(spa_t *spa, spa_log_state_t state) { spa->spa_log_state = state; } boolean_t spa_is_root(spa_t *spa) { return (spa->spa_is_root); } boolean_t spa_writeable(spa_t *spa) { return (!!(spa->spa_mode & SPA_MODE_WRITE) && spa->spa_trust_config); } /* * Returns true if there is a pending sync task in any of the current * syncing txg, the current quiescing txg, or the current open txg. */ boolean_t spa_has_pending_synctask(spa_t *spa) { return (!txg_all_lists_empty(&spa->spa_dsl_pool->dp_sync_tasks) || !txg_all_lists_empty(&spa->spa_dsl_pool->dp_early_sync_tasks)); } spa_mode_t spa_mode(spa_t *spa) { return (spa->spa_mode); } uint64_t spa_bootfs(spa_t *spa) { return (spa->spa_bootfs); } uint64_t spa_delegation(spa_t *spa) { return (spa->spa_delegation); } objset_t * spa_meta_objset(spa_t *spa) { return (spa->spa_meta_objset); } enum zio_checksum spa_dedup_checksum(spa_t *spa) { return (spa->spa_dedup_checksum); } /* * Reset pool scan stat per scan pass (or reboot). */ void spa_scan_stat_init(spa_t *spa) { /* data not stored on disk */ spa->spa_scan_pass_start = gethrestime_sec(); if (dsl_scan_is_paused_scrub(spa->spa_dsl_pool->dp_scan)) spa->spa_scan_pass_scrub_pause = spa->spa_scan_pass_start; else spa->spa_scan_pass_scrub_pause = 0; if (dsl_errorscrub_is_paused(spa->spa_dsl_pool->dp_scan)) spa->spa_scan_pass_errorscrub_pause = spa->spa_scan_pass_start; else spa->spa_scan_pass_errorscrub_pause = 0; spa->spa_scan_pass_scrub_spent_paused = 0; spa->spa_scan_pass_exam = 0; spa->spa_scan_pass_issued = 0; // error scrub stats spa->spa_scan_pass_errorscrub_spent_paused = 0; } /* * Get scan stats for zpool status reports */ int spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps) { dsl_scan_t *scn = spa->spa_dsl_pool ? spa->spa_dsl_pool->dp_scan : NULL; if (scn == NULL || (scn->scn_phys.scn_func == POOL_SCAN_NONE && scn->errorscrub_phys.dep_func == POOL_SCAN_NONE)) return (SET_ERROR(ENOENT)); memset(ps, 0, sizeof (pool_scan_stat_t)); /* data stored on disk */ ps->pss_func = scn->scn_phys.scn_func; ps->pss_state = scn->scn_phys.scn_state; ps->pss_start_time = scn->scn_phys.scn_start_time; ps->pss_end_time = scn->scn_phys.scn_end_time; ps->pss_to_examine = scn->scn_phys.scn_to_examine; ps->pss_examined = scn->scn_phys.scn_examined; ps->pss_skipped = scn->scn_phys.scn_skipped; ps->pss_processed = scn->scn_phys.scn_processed; ps->pss_errors = scn->scn_phys.scn_errors; /* data not stored on disk */ ps->pss_pass_exam = spa->spa_scan_pass_exam; ps->pss_pass_start = spa->spa_scan_pass_start; ps->pss_pass_scrub_pause = spa->spa_scan_pass_scrub_pause; ps->pss_pass_scrub_spent_paused = spa->spa_scan_pass_scrub_spent_paused; ps->pss_pass_issued = spa->spa_scan_pass_issued; ps->pss_issued = scn->scn_issued_before_pass + spa->spa_scan_pass_issued; /* error scrub data stored on disk */ ps->pss_error_scrub_func = scn->errorscrub_phys.dep_func; ps->pss_error_scrub_state = scn->errorscrub_phys.dep_state; ps->pss_error_scrub_start = scn->errorscrub_phys.dep_start_time; ps->pss_error_scrub_end = scn->errorscrub_phys.dep_end_time; ps->pss_error_scrub_examined = scn->errorscrub_phys.dep_examined; ps->pss_error_scrub_to_be_examined = scn->errorscrub_phys.dep_to_examine; /* error scrub data not stored on disk */ ps->pss_pass_error_scrub_pause = spa->spa_scan_pass_errorscrub_pause; return (0); } int spa_maxblocksize(spa_t *spa) { if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS)) return (SPA_MAXBLOCKSIZE); else return (SPA_OLD_MAXBLOCKSIZE); } /* * Returns the txg that the last device removal completed. No indirect mappings * have been added since this txg. */ uint64_t spa_get_last_removal_txg(spa_t *spa) { uint64_t vdevid; uint64_t ret = -1ULL; spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); /* * sr_prev_indirect_vdev is only modified while holding all the * config locks, so it is sufficient to hold SCL_VDEV as reader when * examining it. */ vdevid = spa->spa_removing_phys.sr_prev_indirect_vdev; while (vdevid != -1ULL) { vdev_t *vd = vdev_lookup_top(spa, vdevid); vdev_indirect_births_t *vib = vd->vdev_indirect_births; ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops); /* * If the removal did not remap any data, we don't care. */ if (vdev_indirect_births_count(vib) != 0) { ret = vdev_indirect_births_last_entry_txg(vib); break; } vdevid = vd->vdev_indirect_config.vic_prev_indirect_vdev; } spa_config_exit(spa, SCL_VDEV, FTAG); IMPLY(ret != -1ULL, spa_feature_is_active(spa, SPA_FEATURE_DEVICE_REMOVAL)); return (ret); } int spa_maxdnodesize(spa_t *spa) { if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE)) return (DNODE_MAX_SIZE); else return (DNODE_MIN_SIZE); } boolean_t spa_multihost(spa_t *spa) { return (spa->spa_multihost ? B_TRUE : B_FALSE); } uint32_t spa_get_hostid(spa_t *spa) { return (spa->spa_hostid); } boolean_t spa_trust_config(spa_t *spa) { return (spa->spa_trust_config); } uint64_t spa_missing_tvds_allowed(spa_t *spa) { return (spa->spa_missing_tvds_allowed); } space_map_t * spa_syncing_log_sm(spa_t *spa) { return (spa->spa_syncing_log_sm); } void spa_set_missing_tvds(spa_t *spa, uint64_t missing) { spa->spa_missing_tvds = missing; } /* * Return the pool state string ("ONLINE", "DEGRADED", "SUSPENDED", etc). */ const char * spa_state_to_name(spa_t *spa) { ASSERT3P(spa, !=, NULL); /* * it is possible for the spa to exist, without root vdev * as the spa transitions during import/export */ vdev_t *rvd = spa->spa_root_vdev; if (rvd == NULL) { return ("TRANSITIONING"); } vdev_state_t state = rvd->vdev_state; vdev_aux_t aux = rvd->vdev_stat.vs_aux; if (spa_suspended(spa)) return ("SUSPENDED"); switch (state) { case VDEV_STATE_CLOSED: case VDEV_STATE_OFFLINE: return ("OFFLINE"); case VDEV_STATE_REMOVED: return ("REMOVED"); case VDEV_STATE_CANT_OPEN: if (aux == VDEV_AUX_CORRUPT_DATA || aux == VDEV_AUX_BAD_LOG) return ("FAULTED"); else if (aux == VDEV_AUX_SPLIT_POOL) return ("SPLIT"); else return ("UNAVAIL"); case VDEV_STATE_FAULTED: return ("FAULTED"); case VDEV_STATE_DEGRADED: return ("DEGRADED"); case VDEV_STATE_HEALTHY: return ("ONLINE"); default: break; } return ("UNKNOWN"); } boolean_t spa_top_vdevs_spacemap_addressable(spa_t *spa) { vdev_t *rvd = spa->spa_root_vdev; for (uint64_t c = 0; c < rvd->vdev_children; c++) { if (!vdev_is_spacemap_addressable(rvd->vdev_child[c])) return (B_FALSE); } return (B_TRUE); } boolean_t spa_has_checkpoint(spa_t *spa) { return (spa->spa_checkpoint_txg != 0); } boolean_t spa_importing_readonly_checkpoint(spa_t *spa) { return ((spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT) && spa->spa_mode == SPA_MODE_READ); } uint64_t spa_min_claim_txg(spa_t *spa) { uint64_t checkpoint_txg = spa->spa_uberblock.ub_checkpoint_txg; if (checkpoint_txg != 0) return (checkpoint_txg + 1); return (spa->spa_first_txg); } /* * If there is a checkpoint, async destroys may consume more space from * the pool instead of freeing it. In an attempt to save the pool from * getting suspended when it is about to run out of space, we stop * processing async destroys. */ boolean_t spa_suspend_async_destroy(spa_t *spa) { dsl_pool_t *dp = spa_get_dsl(spa); uint64_t unreserved = dsl_pool_unreserved_space(dp, ZFS_SPACE_CHECK_EXTRA_RESERVED); uint64_t used = dsl_dir_phys(dp->dp_root_dir)->dd_used_bytes; uint64_t avail = (unreserved > used) ? (unreserved - used) : 0; if (spa_has_checkpoint(spa) && avail == 0) return (B_TRUE); return (B_FALSE); } #if defined(_KERNEL) int param_set_deadman_failmode_common(const char *val) { spa_t *spa = NULL; char *p; if (val == NULL) return (SET_ERROR(EINVAL)); if ((p = strchr(val, '\n')) != NULL) *p = '\0'; if (strcmp(val, "wait") != 0 && strcmp(val, "continue") != 0 && strcmp(val, "panic")) return (SET_ERROR(EINVAL)); if (spa_mode_global != SPA_MODE_UNINIT) { mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa)) != NULL) spa_set_deadman_failmode(spa, val); mutex_exit(&spa_namespace_lock); } return (0); } #endif /* Namespace manipulation */ EXPORT_SYMBOL(spa_lookup); EXPORT_SYMBOL(spa_add); EXPORT_SYMBOL(spa_remove); EXPORT_SYMBOL(spa_next); /* Refcount functions */ EXPORT_SYMBOL(spa_open_ref); EXPORT_SYMBOL(spa_close); EXPORT_SYMBOL(spa_refcount_zero); /* Pool configuration lock */ EXPORT_SYMBOL(spa_config_tryenter); EXPORT_SYMBOL(spa_config_enter); EXPORT_SYMBOL(spa_config_exit); EXPORT_SYMBOL(spa_config_held); /* Pool vdev add/remove lock */ EXPORT_SYMBOL(spa_vdev_enter); EXPORT_SYMBOL(spa_vdev_exit); /* Pool vdev state change lock */ EXPORT_SYMBOL(spa_vdev_state_enter); EXPORT_SYMBOL(spa_vdev_state_exit); /* Accessor functions */ EXPORT_SYMBOL(spa_shutting_down); EXPORT_SYMBOL(spa_get_dsl); EXPORT_SYMBOL(spa_get_rootblkptr); EXPORT_SYMBOL(spa_set_rootblkptr); EXPORT_SYMBOL(spa_altroot); EXPORT_SYMBOL(spa_sync_pass); EXPORT_SYMBOL(spa_name); EXPORT_SYMBOL(spa_guid); EXPORT_SYMBOL(spa_last_synced_txg); EXPORT_SYMBOL(spa_first_txg); EXPORT_SYMBOL(spa_syncing_txg); EXPORT_SYMBOL(spa_version); EXPORT_SYMBOL(spa_state); EXPORT_SYMBOL(spa_load_state); EXPORT_SYMBOL(spa_freeze_txg); EXPORT_SYMBOL(spa_get_dspace); EXPORT_SYMBOL(spa_update_dspace); EXPORT_SYMBOL(spa_deflate); EXPORT_SYMBOL(spa_normal_class); EXPORT_SYMBOL(spa_log_class); EXPORT_SYMBOL(spa_special_class); EXPORT_SYMBOL(spa_preferred_class); EXPORT_SYMBOL(spa_max_replication); EXPORT_SYMBOL(spa_prev_software_version); EXPORT_SYMBOL(spa_get_failmode); EXPORT_SYMBOL(spa_suspended); EXPORT_SYMBOL(spa_bootfs); EXPORT_SYMBOL(spa_delegation); EXPORT_SYMBOL(spa_meta_objset); EXPORT_SYMBOL(spa_maxblocksize); EXPORT_SYMBOL(spa_maxdnodesize); /* Miscellaneous support routines */ EXPORT_SYMBOL(spa_guid_exists); EXPORT_SYMBOL(spa_strdup); EXPORT_SYMBOL(spa_strfree); EXPORT_SYMBOL(spa_generate_guid); EXPORT_SYMBOL(snprintf_blkptr); EXPORT_SYMBOL(spa_freeze); EXPORT_SYMBOL(spa_upgrade); EXPORT_SYMBOL(spa_evict_all); EXPORT_SYMBOL(spa_lookup_by_guid); EXPORT_SYMBOL(spa_has_spare); EXPORT_SYMBOL(dva_get_dsize_sync); EXPORT_SYMBOL(bp_get_dsize_sync); EXPORT_SYMBOL(bp_get_dsize); EXPORT_SYMBOL(spa_has_slogs); EXPORT_SYMBOL(spa_is_root); EXPORT_SYMBOL(spa_writeable); EXPORT_SYMBOL(spa_mode); EXPORT_SYMBOL(spa_namespace_lock); EXPORT_SYMBOL(spa_trust_config); EXPORT_SYMBOL(spa_missing_tvds_allowed); EXPORT_SYMBOL(spa_set_missing_tvds); EXPORT_SYMBOL(spa_state_to_name); EXPORT_SYMBOL(spa_importing_readonly_checkpoint); EXPORT_SYMBOL(spa_min_claim_txg); EXPORT_SYMBOL(spa_suspend_async_destroy); EXPORT_SYMBOL(spa_has_checkpoint); EXPORT_SYMBOL(spa_top_vdevs_spacemap_addressable); ZFS_MODULE_PARAM(zfs, zfs_, flags, UINT, ZMOD_RW, "Set additional debugging flags"); ZFS_MODULE_PARAM(zfs, zfs_, recover, INT, ZMOD_RW, "Set to attempt to recover from fatal errors"); ZFS_MODULE_PARAM(zfs, zfs_, free_leak_on_eio, INT, ZMOD_RW, "Set to ignore IO errors during free and permanently leak the space"); ZFS_MODULE_PARAM(zfs_deadman, zfs_deadman_, checktime_ms, U64, ZMOD_RW, "Dead I/O check interval in milliseconds"); ZFS_MODULE_PARAM(zfs_deadman, zfs_deadman_, enabled, INT, ZMOD_RW, "Enable deadman timer"); ZFS_MODULE_PARAM(zfs_spa, spa_, asize_inflation, UINT, ZMOD_RW, "SPA size estimate multiplication factor"); ZFS_MODULE_PARAM(zfs, zfs_, ddt_data_is_special, INT, ZMOD_RW, "Place DDT data into the special class"); ZFS_MODULE_PARAM(zfs, zfs_, user_indirect_is_special, INT, ZMOD_RW, "Place user data indirect blocks into the special class"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, failmode, param_set_deadman_failmode, param_get_charp, ZMOD_RW, "Failmode for deadman timer"); ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, synctime_ms, param_set_deadman_synctime, spl_param_get_u64, ZMOD_RW, "Pool sync expiration time in milliseconds"); ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, ziotime_ms, param_set_deadman_ziotime, spl_param_get_u64, ZMOD_RW, "IO expiration time in milliseconds"); ZFS_MODULE_PARAM(zfs, zfs_, special_class_metadata_reserve_pct, UINT, ZMOD_RW, "Small file blocks in special vdevs depends on this much " "free space available"); /* END CSTYLED */ ZFS_MODULE_PARAM_CALL(zfs_spa, spa_, slop_shift, param_set_slop_shift, param_get_uint, ZMOD_RW, "Reserved free space in pool"); ZFS_MODULE_PARAM(zfs, spa_, num_allocators, INT, ZMOD_RW, "Number of allocators per spa"); ZFS_MODULE_PARAM(zfs, spa_, cpus_per_allocator, INT, ZMOD_RW, "Minimum number of CPUs per allocators"); diff --git a/module/zfs/zio.c b/module/zfs/zio.c index d68d5ababe79..bc5a3c9b709b 100644 --- a/module/zfs/zio.c +++ b/module/zfs/zio.c @@ -1,5264 +1,5293 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2022 by Delphix. All rights reserved. * Copyright (c) 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019, 2023, 2024, Klara Inc. * Copyright (c) 2019, Allan Jude * Copyright (c) 2021, Datto, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * ========================================================================== * I/O type descriptions * ========================================================================== */ const char *const zio_type_name[ZIO_TYPES] = { /* * Note: Linux kernel thread name length is limited * so these names will differ from upstream open zfs. */ "z_null", "z_rd", "z_wr", "z_fr", "z_cl", "z_flush", "z_trim" }; int zio_dva_throttle_enabled = B_TRUE; static int zio_deadman_log_all = B_FALSE; /* * ========================================================================== * I/O kmem caches * ========================================================================== */ static kmem_cache_t *zio_cache; static kmem_cache_t *zio_link_cache; kmem_cache_t *zio_buf_cache[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT]; kmem_cache_t *zio_data_buf_cache[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT]; #if defined(ZFS_DEBUG) && !defined(_KERNEL) static uint64_t zio_buf_cache_allocs[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT]; static uint64_t zio_buf_cache_frees[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT]; #endif /* Mark IOs as "slow" if they take longer than 30 seconds */ static uint_t zio_slow_io_ms = (30 * MILLISEC); #define BP_SPANB(indblkshift, level) \ (((uint64_t)1) << ((level) * ((indblkshift) - SPA_BLKPTRSHIFT))) #define COMPARE_META_LEVEL 0x80000000ul /* * The following actions directly effect the spa's sync-to-convergence logic. * The values below define the sync pass when we start performing the action. * Care should be taken when changing these values as they directly impact * spa_sync() performance. Tuning these values may introduce subtle performance * pathologies and should only be done in the context of performance analysis. * These tunables will eventually be removed and replaced with #defines once * enough analysis has been done to determine optimal values. * * The 'zfs_sync_pass_deferred_free' pass must be greater than 1 to ensure that * regular blocks are not deferred. * * Starting in sync pass 8 (zfs_sync_pass_dont_compress), we disable * compression (including of metadata). In practice, we don't have this * many sync passes, so this has no effect. * * The original intent was that disabling compression would help the sync * passes to converge. However, in practice disabling compression increases * the average number of sync passes, because when we turn compression off, a * lot of block's size will change and thus we have to re-allocate (not * overwrite) them. It also increases the number of 128KB allocations (e.g. * for indirect blocks and spacemaps) because these will not be compressed. * The 128K allocations are especially detrimental to performance on highly * fragmented systems, which may have very few free segments of this size, * and may need to load new metaslabs to satisfy 128K allocations. */ /* defer frees starting in this pass */ uint_t zfs_sync_pass_deferred_free = 2; /* don't compress starting in this pass */ static uint_t zfs_sync_pass_dont_compress = 8; /* rewrite new bps starting in this pass */ static uint_t zfs_sync_pass_rewrite = 2; /* * An allocating zio is one that either currently has the DVA allocate * stage set or will have it later in its lifetime. */ #define IO_IS_ALLOCATING(zio) ((zio)->io_orig_pipeline & ZIO_STAGE_DVA_ALLOCATE) /* * Enable smaller cores by excluding metadata * allocations as well. */ int zio_exclude_metadata = 0; static int zio_requeue_io_start_cut_in_line = 1; #ifdef ZFS_DEBUG static const int zio_buf_debug_limit = 16384; #else static const int zio_buf_debug_limit = 0; #endif static inline void __zio_execute(zio_t *zio); static void zio_taskq_dispatch(zio_t *, zio_taskq_type_t, boolean_t); void zio_init(void) { size_t c; zio_cache = kmem_cache_create("zio_cache", sizeof (zio_t), 0, NULL, NULL, NULL, NULL, NULL, 0); zio_link_cache = kmem_cache_create("zio_link_cache", sizeof (zio_link_t), 0, NULL, NULL, NULL, NULL, NULL, 0); for (c = 0; c < SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT; c++) { size_t size = (c + 1) << SPA_MINBLOCKSHIFT; size_t align, cflags, data_cflags; char name[32]; /* * Create cache for each half-power of 2 size, starting from * SPA_MINBLOCKSIZE. It should give us memory space efficiency * of ~7/8, sufficient for transient allocations mostly using * these caches. */ size_t p2 = size; while (!ISP2(p2)) p2 &= p2 - 1; if (!IS_P2ALIGNED(size, p2 / 2)) continue; #ifndef _KERNEL /* * If we are using watchpoints, put each buffer on its own page, * to eliminate the performance overhead of trapping to the * kernel when modifying a non-watched buffer that shares the * page with a watched buffer. */ if (arc_watch && !IS_P2ALIGNED(size, PAGESIZE)) continue; #endif if (IS_P2ALIGNED(size, PAGESIZE)) align = PAGESIZE; else align = 1 << (highbit64(size ^ (size - 1)) - 1); cflags = (zio_exclude_metadata || size > zio_buf_debug_limit) ? KMC_NODEBUG : 0; data_cflags = KMC_NODEBUG; if (cflags == data_cflags) { /* * Resulting kmem caches would be identical. * Save memory by creating only one. */ (void) snprintf(name, sizeof (name), "zio_buf_comb_%lu", (ulong_t)size); zio_buf_cache[c] = kmem_cache_create(name, size, align, NULL, NULL, NULL, NULL, NULL, cflags); zio_data_buf_cache[c] = zio_buf_cache[c]; continue; } (void) snprintf(name, sizeof (name), "zio_buf_%lu", (ulong_t)size); zio_buf_cache[c] = kmem_cache_create(name, size, align, NULL, NULL, NULL, NULL, NULL, cflags); (void) snprintf(name, sizeof (name), "zio_data_buf_%lu", (ulong_t)size); zio_data_buf_cache[c] = kmem_cache_create(name, size, align, NULL, NULL, NULL, NULL, NULL, data_cflags); } while (--c != 0) { ASSERT(zio_buf_cache[c] != NULL); if (zio_buf_cache[c - 1] == NULL) zio_buf_cache[c - 1] = zio_buf_cache[c]; ASSERT(zio_data_buf_cache[c] != NULL); if (zio_data_buf_cache[c - 1] == NULL) zio_data_buf_cache[c - 1] = zio_data_buf_cache[c]; } zio_inject_init(); lz4_init(); } void zio_fini(void) { size_t n = SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT; #if defined(ZFS_DEBUG) && !defined(_KERNEL) for (size_t i = 0; i < n; i++) { if (zio_buf_cache_allocs[i] != zio_buf_cache_frees[i]) (void) printf("zio_fini: [%d] %llu != %llu\n", (int)((i + 1) << SPA_MINBLOCKSHIFT), (long long unsigned)zio_buf_cache_allocs[i], (long long unsigned)zio_buf_cache_frees[i]); } #endif /* * The same kmem cache can show up multiple times in both zio_buf_cache * and zio_data_buf_cache. Do a wasteful but trivially correct scan to * sort it out. */ for (size_t i = 0; i < n; i++) { kmem_cache_t *cache = zio_buf_cache[i]; if (cache == NULL) continue; for (size_t j = i; j < n; j++) { if (cache == zio_buf_cache[j]) zio_buf_cache[j] = NULL; if (cache == zio_data_buf_cache[j]) zio_data_buf_cache[j] = NULL; } kmem_cache_destroy(cache); } for (size_t i = 0; i < n; i++) { kmem_cache_t *cache = zio_data_buf_cache[i]; if (cache == NULL) continue; for (size_t j = i; j < n; j++) { if (cache == zio_data_buf_cache[j]) zio_data_buf_cache[j] = NULL; } kmem_cache_destroy(cache); } for (size_t i = 0; i < n; i++) { VERIFY3P(zio_buf_cache[i], ==, NULL); VERIFY3P(zio_data_buf_cache[i], ==, NULL); } kmem_cache_destroy(zio_link_cache); kmem_cache_destroy(zio_cache); zio_inject_fini(); lz4_fini(); } /* * ========================================================================== * Allocate and free I/O buffers * ========================================================================== */ #ifdef ZFS_DEBUG static const ulong_t zio_buf_canary = (ulong_t)0xdeadc0dedead210b; #endif /* * Use empty space after the buffer to detect overflows. * * Since zio_init() creates kmem caches only for certain set of buffer sizes, * allocations of different sizes may have some unused space after the data. * Filling part of that space with a known pattern on allocation and checking * it on free should allow us to detect some buffer overflows. */ static void zio_buf_put_canary(ulong_t *p, size_t size, kmem_cache_t **cache, size_t c) { #ifdef ZFS_DEBUG size_t off = P2ROUNDUP(size, sizeof (ulong_t)); ulong_t *canary = p + off / sizeof (ulong_t); size_t asize = (c + 1) << SPA_MINBLOCKSHIFT; if (c + 1 < SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT && cache[c] == cache[c + 1]) asize = (c + 2) << SPA_MINBLOCKSHIFT; for (; off < asize; canary++, off += sizeof (ulong_t)) *canary = zio_buf_canary; #endif } static void zio_buf_check_canary(ulong_t *p, size_t size, kmem_cache_t **cache, size_t c) { #ifdef ZFS_DEBUG size_t off = P2ROUNDUP(size, sizeof (ulong_t)); ulong_t *canary = p + off / sizeof (ulong_t); size_t asize = (c + 1) << SPA_MINBLOCKSHIFT; if (c + 1 < SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT && cache[c] == cache[c + 1]) asize = (c + 2) << SPA_MINBLOCKSHIFT; for (; off < asize; canary++, off += sizeof (ulong_t)) { if (unlikely(*canary != zio_buf_canary)) { PANIC("ZIO buffer overflow %p (%zu) + %zu %#lx != %#lx", p, size, (canary - p) * sizeof (ulong_t), *canary, zio_buf_canary); } } #endif } /* * Use zio_buf_alloc to allocate ZFS metadata. This data will appear in a * crashdump if the kernel panics, so use it judiciously. Obviously, it's * useful to inspect ZFS metadata, but if possible, we should avoid keeping * excess / transient data in-core during a crashdump. */ void * zio_buf_alloc(size_t size) { size_t c = (size - 1) >> SPA_MINBLOCKSHIFT; VERIFY3U(c, <, SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT); #if defined(ZFS_DEBUG) && !defined(_KERNEL) atomic_add_64(&zio_buf_cache_allocs[c], 1); #endif void *p = kmem_cache_alloc(zio_buf_cache[c], KM_PUSHPAGE); zio_buf_put_canary(p, size, zio_buf_cache, c); return (p); } /* * Use zio_data_buf_alloc to allocate data. The data will not appear in a * crashdump if the kernel panics. This exists so that we will limit the amount * of ZFS data that shows up in a kernel crashdump. (Thus reducing the amount * of kernel heap dumped to disk when the kernel panics) */ void * zio_data_buf_alloc(size_t size) { size_t c = (size - 1) >> SPA_MINBLOCKSHIFT; VERIFY3U(c, <, SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT); void *p = kmem_cache_alloc(zio_data_buf_cache[c], KM_PUSHPAGE); zio_buf_put_canary(p, size, zio_data_buf_cache, c); return (p); } void zio_buf_free(void *buf, size_t size) { size_t c = (size - 1) >> SPA_MINBLOCKSHIFT; VERIFY3U(c, <, SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT); #if defined(ZFS_DEBUG) && !defined(_KERNEL) atomic_add_64(&zio_buf_cache_frees[c], 1); #endif zio_buf_check_canary(buf, size, zio_buf_cache, c); kmem_cache_free(zio_buf_cache[c], buf); } void zio_data_buf_free(void *buf, size_t size) { size_t c = (size - 1) >> SPA_MINBLOCKSHIFT; VERIFY3U(c, <, SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT); zio_buf_check_canary(buf, size, zio_data_buf_cache, c); kmem_cache_free(zio_data_buf_cache[c], buf); } static void zio_abd_free(void *abd, size_t size) { (void) size; abd_free((abd_t *)abd); } /* * ========================================================================== * Push and pop I/O transform buffers * ========================================================================== */ void zio_push_transform(zio_t *zio, abd_t *data, uint64_t size, uint64_t bufsize, zio_transform_func_t *transform) { zio_transform_t *zt = kmem_alloc(sizeof (zio_transform_t), KM_SLEEP); zt->zt_orig_abd = zio->io_abd; zt->zt_orig_size = zio->io_size; zt->zt_bufsize = bufsize; zt->zt_transform = transform; zt->zt_next = zio->io_transform_stack; zio->io_transform_stack = zt; zio->io_abd = data; zio->io_size = size; } void zio_pop_transforms(zio_t *zio) { zio_transform_t *zt; while ((zt = zio->io_transform_stack) != NULL) { if (zt->zt_transform != NULL) zt->zt_transform(zio, zt->zt_orig_abd, zt->zt_orig_size); if (zt->zt_bufsize != 0) abd_free(zio->io_abd); zio->io_abd = zt->zt_orig_abd; zio->io_size = zt->zt_orig_size; zio->io_transform_stack = zt->zt_next; kmem_free(zt, sizeof (zio_transform_t)); } } /* * ========================================================================== * I/O transform callbacks for subblocks, decompression, and decryption * ========================================================================== */ static void zio_subblock(zio_t *zio, abd_t *data, uint64_t size) { ASSERT(zio->io_size > size); if (zio->io_type == ZIO_TYPE_READ) abd_copy(data, zio->io_abd, size); } static void zio_decompress(zio_t *zio, abd_t *data, uint64_t size) { if (zio->io_error == 0) { void *tmp = abd_borrow_buf(data, size); int ret = zio_decompress_data(BP_GET_COMPRESS(zio->io_bp), zio->io_abd, tmp, zio->io_size, size, &zio->io_prop.zp_complevel); abd_return_buf_copy(data, tmp, size); if (zio_injection_enabled && ret == 0) ret = zio_handle_fault_injection(zio, EINVAL); if (ret != 0) zio->io_error = SET_ERROR(EIO); } } static void zio_decrypt(zio_t *zio, abd_t *data, uint64_t size) { int ret; void *tmp; blkptr_t *bp = zio->io_bp; spa_t *spa = zio->io_spa; uint64_t dsobj = zio->io_bookmark.zb_objset; uint64_t lsize = BP_GET_LSIZE(bp); dmu_object_type_t ot = BP_GET_TYPE(bp); uint8_t salt[ZIO_DATA_SALT_LEN]; uint8_t iv[ZIO_DATA_IV_LEN]; uint8_t mac[ZIO_DATA_MAC_LEN]; boolean_t no_crypt = B_FALSE; ASSERT(BP_USES_CRYPT(bp)); ASSERT3U(size, !=, 0); if (zio->io_error != 0) return; /* * Verify the cksum of MACs stored in an indirect bp. It will always * be possible to verify this since it does not require an encryption * key. */ if (BP_HAS_INDIRECT_MAC_CKSUM(bp)) { zio_crypt_decode_mac_bp(bp, mac); if (BP_GET_COMPRESS(bp) != ZIO_COMPRESS_OFF) { /* * We haven't decompressed the data yet, but * zio_crypt_do_indirect_mac_checksum() requires * decompressed data to be able to parse out the MACs * from the indirect block. We decompress it now and * throw away the result after we are finished. */ tmp = zio_buf_alloc(lsize); ret = zio_decompress_data(BP_GET_COMPRESS(bp), zio->io_abd, tmp, zio->io_size, lsize, &zio->io_prop.zp_complevel); if (ret != 0) { ret = SET_ERROR(EIO); goto error; } ret = zio_crypt_do_indirect_mac_checksum(B_FALSE, tmp, lsize, BP_SHOULD_BYTESWAP(bp), mac); zio_buf_free(tmp, lsize); } else { ret = zio_crypt_do_indirect_mac_checksum_abd(B_FALSE, zio->io_abd, size, BP_SHOULD_BYTESWAP(bp), mac); } abd_copy(data, zio->io_abd, size); if (zio_injection_enabled && ot != DMU_OT_DNODE && ret == 0) { ret = zio_handle_decrypt_injection(spa, &zio->io_bookmark, ot, ECKSUM); } if (ret != 0) goto error; return; } /* * If this is an authenticated block, just check the MAC. It would be * nice to separate this out into its own flag, but when this was done, * we had run out of bits in what is now zio_flag_t. Future cleanup * could make this a flag bit. */ if (BP_IS_AUTHENTICATED(bp)) { if (ot == DMU_OT_OBJSET) { ret = spa_do_crypt_objset_mac_abd(B_FALSE, spa, dsobj, zio->io_abd, size, BP_SHOULD_BYTESWAP(bp)); } else { zio_crypt_decode_mac_bp(bp, mac); ret = spa_do_crypt_mac_abd(B_FALSE, spa, dsobj, zio->io_abd, size, mac); if (zio_injection_enabled && ret == 0) { ret = zio_handle_decrypt_injection(spa, &zio->io_bookmark, ot, ECKSUM); } } abd_copy(data, zio->io_abd, size); if (ret != 0) goto error; return; } zio_crypt_decode_params_bp(bp, salt, iv); if (ot == DMU_OT_INTENT_LOG) { tmp = abd_borrow_buf_copy(zio->io_abd, sizeof (zil_chain_t)); zio_crypt_decode_mac_zil(tmp, mac); abd_return_buf(zio->io_abd, tmp, sizeof (zil_chain_t)); } else { zio_crypt_decode_mac_bp(bp, mac); } ret = spa_do_crypt_abd(B_FALSE, spa, &zio->io_bookmark, BP_GET_TYPE(bp), BP_GET_DEDUP(bp), BP_SHOULD_BYTESWAP(bp), salt, iv, mac, size, data, zio->io_abd, &no_crypt); if (no_crypt) abd_copy(data, zio->io_abd, size); if (ret != 0) goto error; return; error: /* assert that the key was found unless this was speculative */ ASSERT(ret != EACCES || (zio->io_flags & ZIO_FLAG_SPECULATIVE)); /* * If there was a decryption / authentication error return EIO as * the io_error. If this was not a speculative zio, create an ereport. */ if (ret == ECKSUM) { zio->io_error = SET_ERROR(EIO); if ((zio->io_flags & ZIO_FLAG_SPECULATIVE) == 0) { spa_log_error(spa, &zio->io_bookmark, BP_GET_LOGICAL_BIRTH(zio->io_bp)); (void) zfs_ereport_post(FM_EREPORT_ZFS_AUTHENTICATION, spa, NULL, &zio->io_bookmark, zio, 0); } } else { zio->io_error = ret; } } /* * ========================================================================== * I/O parent/child relationships and pipeline interlocks * ========================================================================== */ zio_t * zio_walk_parents(zio_t *cio, zio_link_t **zl) { list_t *pl = &cio->io_parent_list; *zl = (*zl == NULL) ? list_head(pl) : list_next(pl, *zl); if (*zl == NULL) return (NULL); ASSERT((*zl)->zl_child == cio); return ((*zl)->zl_parent); } zio_t * zio_walk_children(zio_t *pio, zio_link_t **zl) { list_t *cl = &pio->io_child_list; ASSERT(MUTEX_HELD(&pio->io_lock)); *zl = (*zl == NULL) ? list_head(cl) : list_next(cl, *zl); if (*zl == NULL) return (NULL); ASSERT((*zl)->zl_parent == pio); return ((*zl)->zl_child); } zio_t * zio_unique_parent(zio_t *cio) { zio_link_t *zl = NULL; zio_t *pio = zio_walk_parents(cio, &zl); VERIFY3P(zio_walk_parents(cio, &zl), ==, NULL); return (pio); } void zio_add_child(zio_t *pio, zio_t *cio) { /* * Logical I/Os can have logical, gang, or vdev children. * Gang I/Os can have gang or vdev children. * Vdev I/Os can only have vdev children. * The following ASSERT captures all of these constraints. */ ASSERT3S(cio->io_child_type, <=, pio->io_child_type); /* Parent should not have READY stage if child doesn't have it. */ IMPLY((cio->io_pipeline & ZIO_STAGE_READY) == 0 && (cio->io_child_type != ZIO_CHILD_VDEV), (pio->io_pipeline & ZIO_STAGE_READY) == 0); zio_link_t *zl = kmem_cache_alloc(zio_link_cache, KM_SLEEP); zl->zl_parent = pio; zl->zl_child = cio; mutex_enter(&pio->io_lock); mutex_enter(&cio->io_lock); ASSERT(pio->io_state[ZIO_WAIT_DONE] == 0); uint64_t *countp = pio->io_children[cio->io_child_type]; for (int w = 0; w < ZIO_WAIT_TYPES; w++) countp[w] += !cio->io_state[w]; list_insert_head(&pio->io_child_list, zl); list_insert_head(&cio->io_parent_list, zl); mutex_exit(&cio->io_lock); mutex_exit(&pio->io_lock); } void zio_add_child_first(zio_t *pio, zio_t *cio) { /* * Logical I/Os can have logical, gang, or vdev children. * Gang I/Os can have gang or vdev children. * Vdev I/Os can only have vdev children. * The following ASSERT captures all of these constraints. */ ASSERT3S(cio->io_child_type, <=, pio->io_child_type); /* Parent should not have READY stage if child doesn't have it. */ IMPLY((cio->io_pipeline & ZIO_STAGE_READY) == 0 && (cio->io_child_type != ZIO_CHILD_VDEV), (pio->io_pipeline & ZIO_STAGE_READY) == 0); zio_link_t *zl = kmem_cache_alloc(zio_link_cache, KM_SLEEP); zl->zl_parent = pio; zl->zl_child = cio; ASSERT(list_is_empty(&cio->io_parent_list)); list_insert_head(&cio->io_parent_list, zl); mutex_enter(&pio->io_lock); ASSERT(pio->io_state[ZIO_WAIT_DONE] == 0); uint64_t *countp = pio->io_children[cio->io_child_type]; for (int w = 0; w < ZIO_WAIT_TYPES; w++) countp[w] += !cio->io_state[w]; list_insert_head(&pio->io_child_list, zl); mutex_exit(&pio->io_lock); } static void zio_remove_child(zio_t *pio, zio_t *cio, zio_link_t *zl) { ASSERT(zl->zl_parent == pio); ASSERT(zl->zl_child == cio); mutex_enter(&pio->io_lock); mutex_enter(&cio->io_lock); list_remove(&pio->io_child_list, zl); list_remove(&cio->io_parent_list, zl); mutex_exit(&cio->io_lock); mutex_exit(&pio->io_lock); kmem_cache_free(zio_link_cache, zl); } static boolean_t zio_wait_for_children(zio_t *zio, uint8_t childbits, enum zio_wait_type wait) { boolean_t waiting = B_FALSE; mutex_enter(&zio->io_lock); ASSERT(zio->io_stall == NULL); for (int c = 0; c < ZIO_CHILD_TYPES; c++) { if (!(ZIO_CHILD_BIT_IS_SET(childbits, c))) continue; uint64_t *countp = &zio->io_children[c][wait]; if (*countp != 0) { zio->io_stage >>= 1; ASSERT3U(zio->io_stage, !=, ZIO_STAGE_OPEN); zio->io_stall = countp; waiting = B_TRUE; break; } } mutex_exit(&zio->io_lock); return (waiting); } __attribute__((always_inline)) static inline void zio_notify_parent(zio_t *pio, zio_t *zio, enum zio_wait_type wait, zio_t **next_to_executep) { uint64_t *countp = &pio->io_children[zio->io_child_type][wait]; int *errorp = &pio->io_child_error[zio->io_child_type]; mutex_enter(&pio->io_lock); if (zio->io_error && !(zio->io_flags & ZIO_FLAG_DONT_PROPAGATE)) *errorp = zio_worst_error(*errorp, zio->io_error); pio->io_reexecute |= zio->io_reexecute; ASSERT3U(*countp, >, 0); (*countp)--; if (*countp == 0 && pio->io_stall == countp) { zio_taskq_type_t type = pio->io_stage < ZIO_STAGE_VDEV_IO_START ? ZIO_TASKQ_ISSUE : ZIO_TASKQ_INTERRUPT; pio->io_stall = NULL; mutex_exit(&pio->io_lock); /* * If we can tell the caller to execute this parent next, do * so. We do this if the parent's zio type matches the child's * type, or if it's a zio_null() with no done callback, and so * has no actual work to do. Otherwise dispatch the parent zio * in its own taskq. * * Having the caller execute the parent when possible reduces * locking on the zio taskq's, reduces context switch * overhead, and has no recursion penalty. Note that one * read from disk typically causes at least 3 zio's: a * zio_null(), the logical zio_read(), and then a physical * zio. When the physical ZIO completes, we are able to call * zio_done() on all 3 of these zio's from one invocation of * zio_execute() by returning the parent back to * zio_execute(). Since the parent isn't executed until this * thread returns back to zio_execute(), the caller should do * so promptly. * * In other cases, dispatching the parent prevents * overflowing the stack when we have deeply nested * parent-child relationships, as we do with the "mega zio" * of writes for spa_sync(), and the chain of ZIL blocks. */ if (next_to_executep != NULL && *next_to_executep == NULL && (pio->io_type == zio->io_type || (pio->io_type == ZIO_TYPE_NULL && !pio->io_done))) { *next_to_executep = pio; } else { zio_taskq_dispatch(pio, type, B_FALSE); } } else { mutex_exit(&pio->io_lock); } } static void zio_inherit_child_errors(zio_t *zio, enum zio_child c) { if (zio->io_child_error[c] != 0 && zio->io_error == 0) zio->io_error = zio->io_child_error[c]; } int zio_bookmark_compare(const void *x1, const void *x2) { const zio_t *z1 = x1; const zio_t *z2 = x2; if (z1->io_bookmark.zb_objset < z2->io_bookmark.zb_objset) return (-1); if (z1->io_bookmark.zb_objset > z2->io_bookmark.zb_objset) return (1); if (z1->io_bookmark.zb_object < z2->io_bookmark.zb_object) return (-1); if (z1->io_bookmark.zb_object > z2->io_bookmark.zb_object) return (1); if (z1->io_bookmark.zb_level < z2->io_bookmark.zb_level) return (-1); if (z1->io_bookmark.zb_level > z2->io_bookmark.zb_level) return (1); if (z1->io_bookmark.zb_blkid < z2->io_bookmark.zb_blkid) return (-1); if (z1->io_bookmark.zb_blkid > z2->io_bookmark.zb_blkid) return (1); if (z1 < z2) return (-1); if (z1 > z2) return (1); return (0); } /* * ========================================================================== * Create the various types of I/O (read, write, free, etc) * ========================================================================== */ static zio_t * zio_create(zio_t *pio, spa_t *spa, uint64_t txg, const blkptr_t *bp, abd_t *data, uint64_t lsize, uint64_t psize, zio_done_func_t *done, void *private, zio_type_t type, zio_priority_t priority, zio_flag_t flags, vdev_t *vd, uint64_t offset, const zbookmark_phys_t *zb, enum zio_stage stage, enum zio_stage pipeline) { zio_t *zio; IMPLY(type != ZIO_TYPE_TRIM, psize <= SPA_MAXBLOCKSIZE); ASSERT(P2PHASE(psize, SPA_MINBLOCKSIZE) == 0); ASSERT(P2PHASE(offset, SPA_MINBLOCKSIZE) == 0); ASSERT(!vd || spa_config_held(spa, SCL_STATE_ALL, RW_READER)); ASSERT(!bp || !(flags & ZIO_FLAG_CONFIG_WRITER)); ASSERT(vd || stage == ZIO_STAGE_OPEN); IMPLY(lsize != psize, (flags & ZIO_FLAG_RAW_COMPRESS) != 0); zio = kmem_cache_alloc(zio_cache, KM_SLEEP); memset(zio, 0, sizeof (zio_t)); mutex_init(&zio->io_lock, NULL, MUTEX_NOLOCKDEP, NULL); cv_init(&zio->io_cv, NULL, CV_DEFAULT, NULL); list_create(&zio->io_parent_list, sizeof (zio_link_t), offsetof(zio_link_t, zl_parent_node)); list_create(&zio->io_child_list, sizeof (zio_link_t), offsetof(zio_link_t, zl_child_node)); metaslab_trace_init(&zio->io_alloc_list); if (vd != NULL) zio->io_child_type = ZIO_CHILD_VDEV; else if (flags & ZIO_FLAG_GANG_CHILD) zio->io_child_type = ZIO_CHILD_GANG; else if (flags & ZIO_FLAG_DDT_CHILD) zio->io_child_type = ZIO_CHILD_DDT; else zio->io_child_type = ZIO_CHILD_LOGICAL; if (bp != NULL) { if (type != ZIO_TYPE_WRITE || zio->io_child_type == ZIO_CHILD_DDT) { zio->io_bp_copy = *bp; zio->io_bp = &zio->io_bp_copy; /* so caller can free */ } else { zio->io_bp = (blkptr_t *)bp; } zio->io_bp_orig = *bp; if (zio->io_child_type == ZIO_CHILD_LOGICAL) zio->io_logical = zio; if (zio->io_child_type > ZIO_CHILD_GANG && BP_IS_GANG(bp)) pipeline |= ZIO_GANG_STAGES; } zio->io_spa = spa; zio->io_txg = txg; zio->io_done = done; zio->io_private = private; zio->io_type = type; zio->io_priority = priority; zio->io_vd = vd; zio->io_offset = offset; zio->io_orig_abd = zio->io_abd = data; zio->io_orig_size = zio->io_size = psize; zio->io_lsize = lsize; zio->io_orig_flags = zio->io_flags = flags; zio->io_orig_stage = zio->io_stage = stage; zio->io_orig_pipeline = zio->io_pipeline = pipeline; zio->io_pipeline_trace = ZIO_STAGE_OPEN; zio->io_allocator = ZIO_ALLOCATOR_NONE; zio->io_state[ZIO_WAIT_READY] = (stage >= ZIO_STAGE_READY) || (pipeline & ZIO_STAGE_READY) == 0; zio->io_state[ZIO_WAIT_DONE] = (stage >= ZIO_STAGE_DONE); if (zb != NULL) zio->io_bookmark = *zb; if (pio != NULL) { zio->io_metaslab_class = pio->io_metaslab_class; if (zio->io_logical == NULL) zio->io_logical = pio->io_logical; if (zio->io_child_type == ZIO_CHILD_GANG) zio->io_gang_leader = pio->io_gang_leader; zio_add_child_first(pio, zio); } taskq_init_ent(&zio->io_tqent); return (zio); } void zio_destroy(zio_t *zio) { metaslab_trace_fini(&zio->io_alloc_list); list_destroy(&zio->io_parent_list); list_destroy(&zio->io_child_list); mutex_destroy(&zio->io_lock); cv_destroy(&zio->io_cv); kmem_cache_free(zio_cache, zio); } /* * ZIO intended to be between others. Provides synchronization at READY * and DONE pipeline stages and calls the respective callbacks. */ zio_t * zio_null(zio_t *pio, spa_t *spa, vdev_t *vd, zio_done_func_t *done, void *private, zio_flag_t flags) { zio_t *zio; zio = zio_create(pio, spa, 0, NULL, NULL, 0, 0, done, private, ZIO_TYPE_NULL, ZIO_PRIORITY_NOW, flags, vd, 0, NULL, ZIO_STAGE_OPEN, ZIO_INTERLOCK_PIPELINE); return (zio); } /* * ZIO intended to be a root of a tree. Unlike null ZIO does not have a * READY pipeline stage (is ready on creation), so it should not be used * as child of any ZIO that may need waiting for grandchildren READY stage * (any other ZIO type). */ zio_t * zio_root(spa_t *spa, zio_done_func_t *done, void *private, zio_flag_t flags) { zio_t *zio; zio = zio_create(NULL, spa, 0, NULL, NULL, 0, 0, done, private, ZIO_TYPE_NULL, ZIO_PRIORITY_NOW, flags, NULL, 0, NULL, ZIO_STAGE_OPEN, ZIO_ROOT_PIPELINE); return (zio); } static int zfs_blkptr_verify_log(spa_t *spa, const blkptr_t *bp, enum blk_verify_flag blk_verify, const char *fmt, ...) { va_list adx; char buf[256]; va_start(adx, fmt); (void) vsnprintf(buf, sizeof (buf), fmt, adx); va_end(adx); zfs_dbgmsg("bad blkptr at %px: " "DVA[0]=%#llx/%#llx " "DVA[1]=%#llx/%#llx " "DVA[2]=%#llx/%#llx " "prop=%#llx " "pad=%#llx,%#llx " "phys_birth=%#llx " "birth=%#llx " "fill=%#llx " "cksum=%#llx/%#llx/%#llx/%#llx", bp, (long long)bp->blk_dva[0].dva_word[0], (long long)bp->blk_dva[0].dva_word[1], (long long)bp->blk_dva[1].dva_word[0], (long long)bp->blk_dva[1].dva_word[1], (long long)bp->blk_dva[2].dva_word[0], (long long)bp->blk_dva[2].dva_word[1], (long long)bp->blk_prop, (long long)bp->blk_pad[0], (long long)bp->blk_pad[1], (long long)BP_GET_PHYSICAL_BIRTH(bp), (long long)BP_GET_LOGICAL_BIRTH(bp), (long long)bp->blk_fill, (long long)bp->blk_cksum.zc_word[0], (long long)bp->blk_cksum.zc_word[1], (long long)bp->blk_cksum.zc_word[2], (long long)bp->blk_cksum.zc_word[3]); switch (blk_verify) { case BLK_VERIFY_HALT: zfs_panic_recover("%s: %s", spa_name(spa), buf); break; case BLK_VERIFY_LOG: zfs_dbgmsg("%s: %s", spa_name(spa), buf); break; case BLK_VERIFY_ONLY: break; } return (1); } /* * Verify the block pointer fields contain reasonable values. This means * it only contains known object types, checksum/compression identifiers, * block sizes within the maximum allowed limits, valid DVAs, etc. * * If everything checks out B_TRUE is returned. The zfs_blkptr_verify * argument controls the behavior when an invalid field is detected. * * Values for blk_verify_flag: * BLK_VERIFY_ONLY: evaluate the block * BLK_VERIFY_LOG: evaluate the block and log problems * BLK_VERIFY_HALT: call zfs_panic_recover on error * * Values for blk_config_flag: * BLK_CONFIG_HELD: caller holds SCL_VDEV for writer * BLK_CONFIG_NEEDED: caller holds no config lock, SCL_VDEV will be * obtained for reader * BLK_CONFIG_SKIP: skip checks which require SCL_VDEV, for better * performance */ boolean_t zfs_blkptr_verify(spa_t *spa, const blkptr_t *bp, enum blk_config_flag blk_config, enum blk_verify_flag blk_verify) { int errors = 0; if (!DMU_OT_IS_VALID(BP_GET_TYPE(bp))) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid TYPE %llu", bp, (longlong_t)BP_GET_TYPE(bp)); } if (BP_GET_CHECKSUM(bp) >= ZIO_CHECKSUM_FUNCTIONS) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid CHECKSUM %llu", bp, (longlong_t)BP_GET_CHECKSUM(bp)); } if (BP_GET_COMPRESS(bp) >= ZIO_COMPRESS_FUNCTIONS) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid COMPRESS %llu", bp, (longlong_t)BP_GET_COMPRESS(bp)); } if (BP_GET_LSIZE(bp) > SPA_MAXBLOCKSIZE) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid LSIZE %llu", bp, (longlong_t)BP_GET_LSIZE(bp)); } if (BP_GET_PSIZE(bp) > SPA_MAXBLOCKSIZE) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid PSIZE %llu", bp, (longlong_t)BP_GET_PSIZE(bp)); } if (BP_IS_EMBEDDED(bp)) { if (BPE_GET_ETYPE(bp) >= NUM_BP_EMBEDDED_TYPES) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px has invalid ETYPE %llu", bp, (longlong_t)BPE_GET_ETYPE(bp)); } } /* * Do not verify individual DVAs if the config is not trusted. This * will be done once the zio is executed in vdev_mirror_map_alloc. */ if (!spa->spa_trust_config) return (errors == 0); switch (blk_config) { case BLK_CONFIG_HELD: ASSERT(spa_config_held(spa, SCL_VDEV, RW_WRITER)); break; case BLK_CONFIG_NEEDED: spa_config_enter(spa, SCL_VDEV, bp, RW_READER); break; case BLK_CONFIG_SKIP: return (errors == 0); default: panic("invalid blk_config %u", blk_config); } /* * Pool-specific checks. * * Note: it would be nice to verify that the logical birth * and physical birth are not too large. However, * spa_freeze() allows the birth time of log blocks (and * dmu_sync()-ed blocks that are in the log) to be arbitrarily * large. */ for (int i = 0; i < BP_GET_NDVAS(bp); i++) { const dva_t *dva = &bp->blk_dva[i]; uint64_t vdevid = DVA_GET_VDEV(dva); if (vdevid >= spa->spa_root_vdev->vdev_children) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px DVA %u has invalid VDEV %llu", bp, i, (longlong_t)vdevid); continue; } vdev_t *vd = spa->spa_root_vdev->vdev_child[vdevid]; if (vd == NULL) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px DVA %u has invalid VDEV %llu", bp, i, (longlong_t)vdevid); continue; } if (vd->vdev_ops == &vdev_hole_ops) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px DVA %u has hole VDEV %llu", bp, i, (longlong_t)vdevid); continue; } if (vd->vdev_ops == &vdev_missing_ops) { /* * "missing" vdevs are valid during import, but we * don't have their detailed info (e.g. asize), so * we can't perform any more checks on them. */ continue; } uint64_t offset = DVA_GET_OFFSET(dva); uint64_t asize = DVA_GET_ASIZE(dva); if (DVA_GET_GANG(dva)) asize = vdev_gang_header_asize(vd); if (offset + asize > vd->vdev_asize) { errors += zfs_blkptr_verify_log(spa, bp, blk_verify, "blkptr at %px DVA %u has invalid OFFSET %llu", bp, i, (longlong_t)offset); } } if (blk_config == BLK_CONFIG_NEEDED) spa_config_exit(spa, SCL_VDEV, bp); return (errors == 0); } boolean_t zfs_dva_valid(spa_t *spa, const dva_t *dva, const blkptr_t *bp) { (void) bp; uint64_t vdevid = DVA_GET_VDEV(dva); if (vdevid >= spa->spa_root_vdev->vdev_children) return (B_FALSE); vdev_t *vd = spa->spa_root_vdev->vdev_child[vdevid]; if (vd == NULL) return (B_FALSE); if (vd->vdev_ops == &vdev_hole_ops) return (B_FALSE); if (vd->vdev_ops == &vdev_missing_ops) { return (B_FALSE); } uint64_t offset = DVA_GET_OFFSET(dva); uint64_t asize = DVA_GET_ASIZE(dva); if (DVA_GET_GANG(dva)) asize = vdev_gang_header_asize(vd); if (offset + asize > vd->vdev_asize) return (B_FALSE); return (B_TRUE); } zio_t * zio_read(zio_t *pio, spa_t *spa, const blkptr_t *bp, abd_t *data, uint64_t size, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, const zbookmark_phys_t *zb) { zio_t *zio; zio = zio_create(pio, spa, BP_GET_BIRTH(bp), bp, data, size, size, done, private, ZIO_TYPE_READ, priority, flags, NULL, 0, zb, ZIO_STAGE_OPEN, (flags & ZIO_FLAG_DDT_CHILD) ? ZIO_DDT_CHILD_READ_PIPELINE : ZIO_READ_PIPELINE); return (zio); } zio_t * zio_write(zio_t *pio, spa_t *spa, uint64_t txg, blkptr_t *bp, abd_t *data, uint64_t lsize, uint64_t psize, const zio_prop_t *zp, zio_done_func_t *ready, zio_done_func_t *children_ready, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, const zbookmark_phys_t *zb) { zio_t *zio; ASSERT(zp->zp_checksum >= ZIO_CHECKSUM_OFF && zp->zp_checksum < ZIO_CHECKSUM_FUNCTIONS && zp->zp_compress >= ZIO_COMPRESS_OFF && zp->zp_compress < ZIO_COMPRESS_FUNCTIONS && DMU_OT_IS_VALID(zp->zp_type) && zp->zp_level < 32 && zp->zp_copies > 0 && zp->zp_copies <= spa_max_replication(spa)); zio = zio_create(pio, spa, txg, bp, data, lsize, psize, done, private, ZIO_TYPE_WRITE, priority, flags, NULL, 0, zb, ZIO_STAGE_OPEN, (flags & ZIO_FLAG_DDT_CHILD) ? ZIO_DDT_CHILD_WRITE_PIPELINE : ZIO_WRITE_PIPELINE); zio->io_ready = ready; zio->io_children_ready = children_ready; zio->io_prop = *zp; /* * Data can be NULL if we are going to call zio_write_override() to * provide the already-allocated BP. But we may need the data to * verify a dedup hit (if requested). In this case, don't try to * dedup (just take the already-allocated BP verbatim). Encrypted * dedup blocks need data as well so we also disable dedup in this * case. */ if (data == NULL && (zio->io_prop.zp_dedup_verify || zio->io_prop.zp_encrypt)) { zio->io_prop.zp_dedup = zio->io_prop.zp_dedup_verify = B_FALSE; } return (zio); } zio_t * zio_rewrite(zio_t *pio, spa_t *spa, uint64_t txg, blkptr_t *bp, abd_t *data, uint64_t size, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, zbookmark_phys_t *zb) { zio_t *zio; zio = zio_create(pio, spa, txg, bp, data, size, size, done, private, ZIO_TYPE_WRITE, priority, flags | ZIO_FLAG_IO_REWRITE, NULL, 0, zb, ZIO_STAGE_OPEN, ZIO_REWRITE_PIPELINE); return (zio); } void zio_write_override(zio_t *zio, blkptr_t *bp, int copies, boolean_t nopwrite, boolean_t brtwrite) { ASSERT(zio->io_type == ZIO_TYPE_WRITE); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(zio->io_stage == ZIO_STAGE_OPEN); ASSERT(zio->io_txg == spa_syncing_txg(zio->io_spa)); ASSERT(!brtwrite || !nopwrite); /* * We must reset the io_prop to match the values that existed * when the bp was first written by dmu_sync() keeping in mind * that nopwrite and dedup are mutually exclusive. */ zio->io_prop.zp_dedup = nopwrite ? B_FALSE : zio->io_prop.zp_dedup; zio->io_prop.zp_nopwrite = nopwrite; zio->io_prop.zp_brtwrite = brtwrite; zio->io_prop.zp_copies = copies; zio->io_bp_override = bp; } void zio_free(spa_t *spa, uint64_t txg, const blkptr_t *bp) { (void) zfs_blkptr_verify(spa, bp, BLK_CONFIG_NEEDED, BLK_VERIFY_HALT); /* * The check for EMBEDDED is a performance optimization. We * process the free here (by ignoring it) rather than * putting it on the list and then processing it in zio_free_sync(). */ if (BP_IS_EMBEDDED(bp)) return; /* * Frees that are for the currently-syncing txg, are not going to be * deferred, and which will not need to do a read (i.e. not GANG or * DEDUP), can be processed immediately. Otherwise, put them on the * in-memory list for later processing. * * Note that we only defer frees after zfs_sync_pass_deferred_free * when the log space map feature is disabled. [see relevant comment * in spa_sync_iterate_to_convergence()] */ if (BP_IS_GANG(bp) || BP_GET_DEDUP(bp) || txg != spa->spa_syncing_txg || (spa_sync_pass(spa) >= zfs_sync_pass_deferred_free && !spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP)) || brt_maybe_exists(spa, bp)) { metaslab_check_free(spa, bp); bplist_append(&spa->spa_free_bplist[txg & TXG_MASK], bp); } else { VERIFY3P(zio_free_sync(NULL, spa, txg, bp, 0), ==, NULL); } } /* * To improve performance, this function may return NULL if we were able * to do the free immediately. This avoids the cost of creating a zio * (and linking it to the parent, etc). */ zio_t * zio_free_sync(zio_t *pio, spa_t *spa, uint64_t txg, const blkptr_t *bp, zio_flag_t flags) { ASSERT(!BP_IS_HOLE(bp)); ASSERT(spa_syncing_txg(spa) == txg); if (BP_IS_EMBEDDED(bp)) return (NULL); metaslab_check_free(spa, bp); arc_freed(spa, bp); dsl_scan_freed(spa, bp); if (BP_IS_GANG(bp) || BP_GET_DEDUP(bp) || brt_maybe_exists(spa, bp)) { /* * GANG, DEDUP and BRT blocks can induce a read (for the gang * block header, the DDT or the BRT), so issue them * asynchronously so that this thread is not tied up. */ enum zio_stage stage = ZIO_FREE_PIPELINE | ZIO_STAGE_ISSUE_ASYNC; return (zio_create(pio, spa, txg, bp, NULL, BP_GET_PSIZE(bp), BP_GET_PSIZE(bp), NULL, NULL, ZIO_TYPE_FREE, ZIO_PRIORITY_NOW, flags, NULL, 0, NULL, ZIO_STAGE_OPEN, stage)); } else { metaslab_free(spa, bp, txg, B_FALSE); return (NULL); } } zio_t * zio_claim(zio_t *pio, spa_t *spa, uint64_t txg, const blkptr_t *bp, zio_done_func_t *done, void *private, zio_flag_t flags) { zio_t *zio; (void) zfs_blkptr_verify(spa, bp, (flags & ZIO_FLAG_CONFIG_WRITER) ? BLK_CONFIG_HELD : BLK_CONFIG_NEEDED, BLK_VERIFY_HALT); if (BP_IS_EMBEDDED(bp)) return (zio_null(pio, spa, NULL, NULL, NULL, 0)); /* * A claim is an allocation of a specific block. Claims are needed * to support immediate writes in the intent log. The issue is that * immediate writes contain committed data, but in a txg that was * *not* committed. Upon opening the pool after an unclean shutdown, * the intent log claims all blocks that contain immediate write data * so that the SPA knows they're in use. * * All claims *must* be resolved in the first txg -- before the SPA * starts allocating blocks -- so that nothing is allocated twice. * If txg == 0 we just verify that the block is claimable. */ ASSERT3U(BP_GET_LOGICAL_BIRTH(&spa->spa_uberblock.ub_rootbp), <, spa_min_claim_txg(spa)); ASSERT(txg == spa_min_claim_txg(spa) || txg == 0); ASSERT(!BP_GET_DEDUP(bp) || !spa_writeable(spa)); /* zdb(8) */ zio = zio_create(pio, spa, txg, bp, NULL, BP_GET_PSIZE(bp), BP_GET_PSIZE(bp), done, private, ZIO_TYPE_CLAIM, ZIO_PRIORITY_NOW, flags, NULL, 0, NULL, ZIO_STAGE_OPEN, ZIO_CLAIM_PIPELINE); ASSERT0(zio->io_queued_timestamp); return (zio); } zio_t * zio_trim(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, enum trim_flag trim_flags) { zio_t *zio; ASSERT0(vd->vdev_children); ASSERT0(P2PHASE(offset, 1ULL << vd->vdev_ashift)); ASSERT0(P2PHASE(size, 1ULL << vd->vdev_ashift)); ASSERT3U(size, !=, 0); zio = zio_create(pio, vd->vdev_spa, 0, NULL, NULL, size, size, done, private, ZIO_TYPE_TRIM, priority, flags | ZIO_FLAG_PHYSICAL, vd, offset, NULL, ZIO_STAGE_OPEN, ZIO_TRIM_PIPELINE); zio->io_trim_flags = trim_flags; return (zio); } zio_t * zio_read_phys(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size, abd_t *data, int checksum, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, boolean_t labels) { zio_t *zio; ASSERT(vd->vdev_children == 0); ASSERT(!labels || offset + size <= VDEV_LABEL_START_SIZE || offset >= vd->vdev_psize - VDEV_LABEL_END_SIZE); ASSERT3U(offset + size, <=, vd->vdev_psize); zio = zio_create(pio, vd->vdev_spa, 0, NULL, data, size, size, done, private, ZIO_TYPE_READ, priority, flags | ZIO_FLAG_PHYSICAL, vd, offset, NULL, ZIO_STAGE_OPEN, ZIO_READ_PHYS_PIPELINE); zio->io_prop.zp_checksum = checksum; return (zio); } zio_t * zio_write_phys(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size, abd_t *data, int checksum, zio_done_func_t *done, void *private, zio_priority_t priority, zio_flag_t flags, boolean_t labels) { zio_t *zio; ASSERT(vd->vdev_children == 0); ASSERT(!labels || offset + size <= VDEV_LABEL_START_SIZE || offset >= vd->vdev_psize - VDEV_LABEL_END_SIZE); ASSERT3U(offset + size, <=, vd->vdev_psize); zio = zio_create(pio, vd->vdev_spa, 0, NULL, data, size, size, done, private, ZIO_TYPE_WRITE, priority, flags | ZIO_FLAG_PHYSICAL, vd, offset, NULL, ZIO_STAGE_OPEN, ZIO_WRITE_PHYS_PIPELINE); zio->io_prop.zp_checksum = checksum; if (zio_checksum_table[checksum].ci_flags & ZCHECKSUM_FLAG_EMBEDDED) { /* * zec checksums are necessarily destructive -- they modify * the end of the write buffer to hold the verifier/checksum. * Therefore, we must make a local copy in case the data is * being written to multiple places in parallel. */ abd_t *wbuf = abd_alloc_sametype(data, size); abd_copy(wbuf, data, size); zio_push_transform(zio, wbuf, size, size, NULL); } return (zio); } /* * Create a child I/O to do some work for us. */ zio_t * zio_vdev_child_io(zio_t *pio, blkptr_t *bp, vdev_t *vd, uint64_t offset, abd_t *data, uint64_t size, int type, zio_priority_t priority, zio_flag_t flags, zio_done_func_t *done, void *private) { enum zio_stage pipeline = ZIO_VDEV_CHILD_PIPELINE; zio_t *zio; /* * vdev child I/Os do not propagate their error to the parent. * Therefore, for correct operation the caller *must* check for * and handle the error in the child i/o's done callback. * The only exceptions are i/os that we don't care about * (OPTIONAL or REPAIR). */ ASSERT((flags & ZIO_FLAG_OPTIONAL) || (flags & ZIO_FLAG_IO_REPAIR) || done != NULL); if (type == ZIO_TYPE_READ && bp != NULL) { /* * If we have the bp, then the child should perform the * checksum and the parent need not. This pushes error * detection as close to the leaves as possible and * eliminates redundant checksums in the interior nodes. */ pipeline |= ZIO_STAGE_CHECKSUM_VERIFY; pio->io_pipeline &= ~ZIO_STAGE_CHECKSUM_VERIFY; } if (vd->vdev_ops->vdev_op_leaf) { ASSERT0(vd->vdev_children); offset += VDEV_LABEL_START_SIZE; } flags |= ZIO_VDEV_CHILD_FLAGS(pio); /* * If we've decided to do a repair, the write is not speculative -- * even if the original read was. */ if (flags & ZIO_FLAG_IO_REPAIR) flags &= ~ZIO_FLAG_SPECULATIVE; /* * If we're creating a child I/O that is not associated with a * top-level vdev, then the child zio is not an allocating I/O. * If this is a retried I/O then we ignore it since we will * have already processed the original allocating I/O. */ if (flags & ZIO_FLAG_IO_ALLOCATING && (vd != vd->vdev_top || (flags & ZIO_FLAG_IO_RETRY))) { ASSERT(pio->io_metaslab_class != NULL); ASSERT(pio->io_metaslab_class->mc_alloc_throttle_enabled); ASSERT(type == ZIO_TYPE_WRITE); ASSERT(priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(!(flags & ZIO_FLAG_IO_REPAIR)); ASSERT(!(pio->io_flags & ZIO_FLAG_IO_REWRITE) || pio->io_child_type == ZIO_CHILD_GANG); flags &= ~ZIO_FLAG_IO_ALLOCATING; } zio = zio_create(pio, pio->io_spa, pio->io_txg, bp, data, size, size, done, private, type, priority, flags, vd, offset, &pio->io_bookmark, ZIO_STAGE_VDEV_IO_START >> 1, pipeline); ASSERT3U(zio->io_child_type, ==, ZIO_CHILD_VDEV); return (zio); } zio_t * zio_vdev_delegated_io(vdev_t *vd, uint64_t offset, abd_t *data, uint64_t size, zio_type_t type, zio_priority_t priority, zio_flag_t flags, zio_done_func_t *done, void *private) { zio_t *zio; ASSERT(vd->vdev_ops->vdev_op_leaf); zio = zio_create(NULL, vd->vdev_spa, 0, NULL, data, size, size, done, private, type, priority, flags | ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_RETRY | ZIO_FLAG_DELEGATED, vd, offset, NULL, ZIO_STAGE_VDEV_IO_START >> 1, ZIO_VDEV_CHILD_PIPELINE); return (zio); } /* * Send a flush command to the given vdev. Unlike most zio creation functions, * the flush zios are issued immediately. You can wait on pio to pause until * the flushes complete. */ void zio_flush(zio_t *pio, vdev_t *vd) { const zio_flag_t flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY; if (vd->vdev_nowritecache) return; if (vd->vdev_children == 0) { zio_nowait(zio_create(pio, vd->vdev_spa, 0, NULL, NULL, 0, 0, NULL, NULL, ZIO_TYPE_FLUSH, ZIO_PRIORITY_NOW, flags, vd, 0, NULL, ZIO_STAGE_OPEN, ZIO_FLUSH_PIPELINE)); } else { for (uint64_t c = 0; c < vd->vdev_children; c++) zio_flush(pio, vd->vdev_child[c]); } } void zio_shrink(zio_t *zio, uint64_t size) { ASSERT3P(zio->io_executor, ==, NULL); ASSERT3U(zio->io_orig_size, ==, zio->io_size); ASSERT3U(size, <=, zio->io_size); /* * We don't shrink for raidz because of problems with the * reconstruction when reading back less than the block size. * Note, BP_IS_RAIDZ() assumes no compression. */ ASSERT(BP_GET_COMPRESS(zio->io_bp) == ZIO_COMPRESS_OFF); if (!BP_IS_RAIDZ(zio->io_bp)) { /* we are not doing a raw write */ ASSERT3U(zio->io_size, ==, zio->io_lsize); zio->io_orig_size = zio->io_size = zio->io_lsize = size; } } /* * Round provided allocation size up to a value that can be allocated * by at least some vdev(s) in the pool with minimum or no additional * padding and without extra space usage on others */ static uint64_t zio_roundup_alloc_size(spa_t *spa, uint64_t size) { if (size > spa->spa_min_alloc) return (roundup(size, spa->spa_gcd_alloc)); return (spa->spa_min_alloc); } /* * ========================================================================== * Prepare to read and write logical blocks * ========================================================================== */ static zio_t * zio_read_bp_init(zio_t *zio) { blkptr_t *bp = zio->io_bp; uint64_t psize = BP_IS_EMBEDDED(bp) ? BPE_GET_PSIZE(bp) : BP_GET_PSIZE(bp); ASSERT3P(zio->io_bp, ==, &zio->io_bp_copy); if (BP_GET_COMPRESS(bp) != ZIO_COMPRESS_OFF && zio->io_child_type == ZIO_CHILD_LOGICAL && !(zio->io_flags & ZIO_FLAG_RAW_COMPRESS)) { zio_push_transform(zio, abd_alloc_sametype(zio->io_abd, psize), psize, psize, zio_decompress); } if (((BP_IS_PROTECTED(bp) && !(zio->io_flags & ZIO_FLAG_RAW_ENCRYPT)) || BP_HAS_INDIRECT_MAC_CKSUM(bp)) && zio->io_child_type == ZIO_CHILD_LOGICAL) { zio_push_transform(zio, abd_alloc_sametype(zio->io_abd, psize), psize, psize, zio_decrypt); } if (BP_IS_EMBEDDED(bp) && BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA) { int psize = BPE_GET_PSIZE(bp); void *data = abd_borrow_buf(zio->io_abd, psize); zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; decode_embedded_bp_compressed(bp, data); abd_return_buf_copy(zio->io_abd, data, psize); } else { ASSERT(!BP_IS_EMBEDDED(bp)); } if (BP_GET_DEDUP(bp) && zio->io_child_type == ZIO_CHILD_LOGICAL) zio->io_pipeline = ZIO_DDT_READ_PIPELINE; return (zio); } static zio_t * zio_write_bp_init(zio_t *zio) { if (!IO_IS_ALLOCATING(zio)) return (zio); ASSERT(zio->io_child_type != ZIO_CHILD_DDT); if (zio->io_bp_override) { blkptr_t *bp = zio->io_bp; zio_prop_t *zp = &zio->io_prop; ASSERT(BP_GET_LOGICAL_BIRTH(bp) != zio->io_txg); *bp = *zio->io_bp_override; zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; if (zp->zp_brtwrite) return (zio); ASSERT(!BP_GET_DEDUP(zio->io_bp_override)); if (BP_IS_EMBEDDED(bp)) return (zio); /* * If we've been overridden and nopwrite is set then * set the flag accordingly to indicate that a nopwrite * has already occurred. */ if (!BP_IS_HOLE(bp) && zp->zp_nopwrite) { ASSERT(!zp->zp_dedup); ASSERT3U(BP_GET_CHECKSUM(bp), ==, zp->zp_checksum); zio->io_flags |= ZIO_FLAG_NOPWRITE; return (zio); } ASSERT(!zp->zp_nopwrite); if (BP_IS_HOLE(bp) || !zp->zp_dedup) return (zio); ASSERT((zio_checksum_table[zp->zp_checksum].ci_flags & ZCHECKSUM_FLAG_DEDUP) || zp->zp_dedup_verify); if (BP_GET_CHECKSUM(bp) == zp->zp_checksum && !zp->zp_encrypt) { BP_SET_DEDUP(bp, 1); zio->io_pipeline |= ZIO_STAGE_DDT_WRITE; return (zio); } /* * We were unable to handle this as an override bp, treat * it as a regular write I/O. */ zio->io_bp_override = NULL; *bp = zio->io_bp_orig; zio->io_pipeline = zio->io_orig_pipeline; } return (zio); } static zio_t * zio_write_compress(zio_t *zio) { spa_t *spa = zio->io_spa; zio_prop_t *zp = &zio->io_prop; enum zio_compress compress = zp->zp_compress; blkptr_t *bp = zio->io_bp; uint64_t lsize = zio->io_lsize; uint64_t psize = zio->io_size; uint32_t pass = 1; /* * If our children haven't all reached the ready stage, * wait for them and then repeat this pipeline stage. */ if (zio_wait_for_children(zio, ZIO_CHILD_LOGICAL_BIT | ZIO_CHILD_GANG_BIT, ZIO_WAIT_READY)) { return (NULL); } if (!IO_IS_ALLOCATING(zio)) return (zio); if (zio->io_children_ready != NULL) { /* * Now that all our children are ready, run the callback * associated with this zio in case it wants to modify the * data to be written. */ ASSERT3U(zp->zp_level, >, 0); zio->io_children_ready(zio); } ASSERT(zio->io_child_type != ZIO_CHILD_DDT); ASSERT(zio->io_bp_override == NULL); if (!BP_IS_HOLE(bp) && BP_GET_LOGICAL_BIRTH(bp) == zio->io_txg) { /* * We're rewriting an existing block, which means we're * working on behalf of spa_sync(). For spa_sync() to * converge, it must eventually be the case that we don't * have to allocate new blocks. But compression changes * the blocksize, which forces a reallocate, and makes * convergence take longer. Therefore, after the first * few passes, stop compressing to ensure convergence. */ pass = spa_sync_pass(spa); ASSERT(zio->io_txg == spa_syncing_txg(spa)); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(!BP_GET_DEDUP(bp)); if (pass >= zfs_sync_pass_dont_compress) compress = ZIO_COMPRESS_OFF; /* Make sure someone doesn't change their mind on overwrites */ ASSERT(BP_IS_EMBEDDED(bp) || BP_IS_GANG(bp) || MIN(zp->zp_copies, spa_max_replication(spa)) == BP_GET_NDVAS(bp)); } /* If it's a compressed write that is not raw, compress the buffer. */ if (compress != ZIO_COMPRESS_OFF && !(zio->io_flags & ZIO_FLAG_RAW_COMPRESS)) { void *cbuf = NULL; psize = zio_compress_data(compress, zio->io_abd, &cbuf, lsize, zp->zp_complevel); if (psize == 0) { compress = ZIO_COMPRESS_OFF; } else if (psize >= lsize) { compress = ZIO_COMPRESS_OFF; if (cbuf != NULL) zio_buf_free(cbuf, lsize); } else if (!zp->zp_dedup && !zp->zp_encrypt && psize <= BPE_PAYLOAD_SIZE && zp->zp_level == 0 && !DMU_OT_HAS_FILL(zp->zp_type) && spa_feature_is_enabled(spa, SPA_FEATURE_EMBEDDED_DATA)) { encode_embedded_bp_compressed(bp, cbuf, compress, lsize, psize); BPE_SET_ETYPE(bp, BP_EMBEDDED_TYPE_DATA); BP_SET_TYPE(bp, zio->io_prop.zp_type); BP_SET_LEVEL(bp, zio->io_prop.zp_level); zio_buf_free(cbuf, lsize); BP_SET_LOGICAL_BIRTH(bp, zio->io_txg); zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; ASSERT(spa_feature_is_active(spa, SPA_FEATURE_EMBEDDED_DATA)); return (zio); } else { /* * Round compressed size up to the minimum allocation * size of the smallest-ashift device, and zero the * tail. This ensures that the compressed size of the * BP (and thus compressratio property) are correct, * in that we charge for the padding used to fill out * the last sector. */ size_t rounded = (size_t)zio_roundup_alloc_size(spa, psize); if (rounded >= lsize) { compress = ZIO_COMPRESS_OFF; zio_buf_free(cbuf, lsize); psize = lsize; } else { abd_t *cdata = abd_get_from_buf(cbuf, lsize); abd_take_ownership_of_buf(cdata, B_TRUE); abd_zero_off(cdata, psize, rounded - psize); psize = rounded; zio_push_transform(zio, cdata, psize, lsize, NULL); } } /* * We were unable to handle this as an override bp, treat * it as a regular write I/O. */ zio->io_bp_override = NULL; *bp = zio->io_bp_orig; zio->io_pipeline = zio->io_orig_pipeline; } else if ((zio->io_flags & ZIO_FLAG_RAW_ENCRYPT) != 0 && zp->zp_type == DMU_OT_DNODE) { /* * The DMU actually relies on the zio layer's compression * to free metadnode blocks that have had all contained * dnodes freed. As a result, even when doing a raw * receive, we must check whether the block can be compressed * to a hole. */ psize = zio_compress_data(ZIO_COMPRESS_EMPTY, zio->io_abd, NULL, lsize, zp->zp_complevel); if (psize == 0 || psize >= lsize) compress = ZIO_COMPRESS_OFF; } else if (zio->io_flags & ZIO_FLAG_RAW_COMPRESS && !(zio->io_flags & ZIO_FLAG_RAW_ENCRYPT)) { /* * If we are raw receiving an encrypted dataset we should not * take this codepath because it will change the on-disk block * and decryption will fail. */ size_t rounded = MIN((size_t)zio_roundup_alloc_size(spa, psize), lsize); if (rounded != psize) { abd_t *cdata = abd_alloc_linear(rounded, B_TRUE); abd_zero_off(cdata, psize, rounded - psize); abd_copy_off(cdata, zio->io_abd, 0, 0, psize); psize = rounded; zio_push_transform(zio, cdata, psize, rounded, NULL); } } else { ASSERT3U(psize, !=, 0); } /* * The final pass of spa_sync() must be all rewrites, but the first * few passes offer a trade-off: allocating blocks defers convergence, * but newly allocated blocks are sequential, so they can be written * to disk faster. Therefore, we allow the first few passes of * spa_sync() to allocate new blocks, but force rewrites after that. * There should only be a handful of blocks after pass 1 in any case. */ if (!BP_IS_HOLE(bp) && BP_GET_LOGICAL_BIRTH(bp) == zio->io_txg && BP_GET_PSIZE(bp) == psize && pass >= zfs_sync_pass_rewrite) { VERIFY3U(psize, !=, 0); enum zio_stage gang_stages = zio->io_pipeline & ZIO_GANG_STAGES; zio->io_pipeline = ZIO_REWRITE_PIPELINE | gang_stages; zio->io_flags |= ZIO_FLAG_IO_REWRITE; } else { BP_ZERO(bp); zio->io_pipeline = ZIO_WRITE_PIPELINE; } if (psize == 0) { if (BP_GET_LOGICAL_BIRTH(&zio->io_bp_orig) != 0 && spa_feature_is_active(spa, SPA_FEATURE_HOLE_BIRTH)) { BP_SET_LSIZE(bp, lsize); BP_SET_TYPE(bp, zp->zp_type); BP_SET_LEVEL(bp, zp->zp_level); BP_SET_BIRTH(bp, zio->io_txg, 0); } zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; } else { ASSERT(zp->zp_checksum != ZIO_CHECKSUM_GANG_HEADER); BP_SET_LSIZE(bp, lsize); BP_SET_TYPE(bp, zp->zp_type); BP_SET_LEVEL(bp, zp->zp_level); BP_SET_PSIZE(bp, psize); BP_SET_COMPRESS(bp, compress); BP_SET_CHECKSUM(bp, zp->zp_checksum); BP_SET_DEDUP(bp, zp->zp_dedup); BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER); if (zp->zp_dedup) { ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(!(zio->io_flags & ZIO_FLAG_IO_REWRITE)); ASSERT(!zp->zp_encrypt || DMU_OT_IS_ENCRYPTED(zp->zp_type)); zio->io_pipeline = ZIO_DDT_WRITE_PIPELINE; } if (zp->zp_nopwrite) { ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(!(zio->io_flags & ZIO_FLAG_IO_REWRITE)); zio->io_pipeline |= ZIO_STAGE_NOP_WRITE; } } return (zio); } static zio_t * zio_free_bp_init(zio_t *zio) { blkptr_t *bp = zio->io_bp; if (zio->io_child_type == ZIO_CHILD_LOGICAL) { if (BP_GET_DEDUP(bp)) zio->io_pipeline = ZIO_DDT_FREE_PIPELINE; } ASSERT3P(zio->io_bp, ==, &zio->io_bp_copy); return (zio); } /* * ========================================================================== * Execute the I/O pipeline * ========================================================================== */ static void zio_taskq_dispatch(zio_t *zio, zio_taskq_type_t q, boolean_t cutinline) { spa_t *spa = zio->io_spa; zio_type_t t = zio->io_type; /* * If we're a config writer or a probe, the normal issue and * interrupt threads may all be blocked waiting for the config lock. * In this case, select the otherwise-unused taskq for ZIO_TYPE_NULL. */ if (zio->io_flags & (ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_PROBE)) t = ZIO_TYPE_NULL; /* * A similar issue exists for the L2ARC write thread until L2ARC 2.0. */ if (t == ZIO_TYPE_WRITE && zio->io_vd && zio->io_vd->vdev_aux) t = ZIO_TYPE_NULL; /* * If this is a high priority I/O, then use the high priority taskq if * available or cut the line otherwise. */ if (zio->io_priority == ZIO_PRIORITY_SYNC_WRITE) { if (spa->spa_zio_taskq[t][q + 1].stqs_count != 0) q++; else cutinline = B_TRUE; } ASSERT3U(q, <, ZIO_TASKQ_TYPES); spa_taskq_dispatch(spa, t, q, zio_execute, zio, cutinline); } static boolean_t zio_taskq_member(zio_t *zio, zio_taskq_type_t q) { spa_t *spa = zio->io_spa; taskq_t *tq = taskq_of_curthread(); for (zio_type_t t = 0; t < ZIO_TYPES; t++) { spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q]; uint_t i; for (i = 0; i < tqs->stqs_count; i++) { if (tqs->stqs_taskq[i] == tq) return (B_TRUE); } } return (B_FALSE); } static zio_t * zio_issue_async(zio_t *zio) { ASSERT((zio->io_type != ZIO_TYPE_WRITE) || ZIO_HAS_ALLOCATOR(zio)); zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, B_FALSE); return (NULL); } void zio_interrupt(void *zio) { zio_taskq_dispatch(zio, ZIO_TASKQ_INTERRUPT, B_FALSE); } void zio_delay_interrupt(zio_t *zio) { /* * The timeout_generic() function isn't defined in userspace, so * rather than trying to implement the function, the zio delay * functionality has been disabled for userspace builds. */ #ifdef _KERNEL /* * If io_target_timestamp is zero, then no delay has been registered * for this IO, thus jump to the end of this function and "skip" the * delay; issuing it directly to the zio layer. */ if (zio->io_target_timestamp != 0) { hrtime_t now = gethrtime(); if (now >= zio->io_target_timestamp) { /* * This IO has already taken longer than the target * delay to complete, so we don't want to delay it * any longer; we "miss" the delay and issue it * directly to the zio layer. This is likely due to * the target latency being set to a value less than * the underlying hardware can satisfy (e.g. delay * set to 1ms, but the disks take 10ms to complete an * IO request). */ DTRACE_PROBE2(zio__delay__miss, zio_t *, zio, hrtime_t, now); zio_interrupt(zio); } else { taskqid_t tid; hrtime_t diff = zio->io_target_timestamp - now; clock_t expire_at_tick = ddi_get_lbolt() + NSEC_TO_TICK(diff); DTRACE_PROBE3(zio__delay__hit, zio_t *, zio, hrtime_t, now, hrtime_t, diff); if (NSEC_TO_TICK(diff) == 0) { /* Our delay is less than a jiffy - just spin */ zfs_sleep_until(zio->io_target_timestamp); zio_interrupt(zio); } else { /* * Use taskq_dispatch_delay() in the place of * OpenZFS's timeout_generic(). */ tid = taskq_dispatch_delay(system_taskq, zio_interrupt, zio, TQ_NOSLEEP, expire_at_tick); if (tid == TASKQID_INVALID) { /* * Couldn't allocate a task. Just * finish the zio without a delay. */ zio_interrupt(zio); } } } return; } #endif DTRACE_PROBE1(zio__delay__skip, zio_t *, zio); zio_interrupt(zio); } static void zio_deadman_impl(zio_t *pio, int ziodepth) { zio_t *cio, *cio_next; zio_link_t *zl = NULL; vdev_t *vd = pio->io_vd; if (zio_deadman_log_all || (vd != NULL && vd->vdev_ops->vdev_op_leaf)) { vdev_queue_t *vq = vd ? &vd->vdev_queue : NULL; zbookmark_phys_t *zb = &pio->io_bookmark; uint64_t delta = gethrtime() - pio->io_timestamp; uint64_t failmode = spa_get_deadman_failmode(pio->io_spa); zfs_dbgmsg("slow zio[%d]: zio=%px timestamp=%llu " "delta=%llu queued=%llu io=%llu " "path=%s " "last=%llu type=%d " "priority=%d flags=0x%llx stage=0x%x " "pipeline=0x%x pipeline-trace=0x%x " "objset=%llu object=%llu " "level=%llu blkid=%llu " "offset=%llu size=%llu " "error=%d", ziodepth, pio, pio->io_timestamp, (u_longlong_t)delta, pio->io_delta, pio->io_delay, vd ? vd->vdev_path : "NULL", vq ? vq->vq_io_complete_ts : 0, pio->io_type, pio->io_priority, (u_longlong_t)pio->io_flags, pio->io_stage, pio->io_pipeline, pio->io_pipeline_trace, (u_longlong_t)zb->zb_objset, (u_longlong_t)zb->zb_object, (u_longlong_t)zb->zb_level, (u_longlong_t)zb->zb_blkid, (u_longlong_t)pio->io_offset, (u_longlong_t)pio->io_size, pio->io_error); (void) zfs_ereport_post(FM_EREPORT_ZFS_DEADMAN, pio->io_spa, vd, zb, pio, 0); if (failmode == ZIO_FAILURE_MODE_CONTINUE && taskq_empty_ent(&pio->io_tqent)) { zio_interrupt(pio); } } mutex_enter(&pio->io_lock); for (cio = zio_walk_children(pio, &zl); cio != NULL; cio = cio_next) { cio_next = zio_walk_children(pio, &zl); zio_deadman_impl(cio, ziodepth + 1); } mutex_exit(&pio->io_lock); } /* * Log the critical information describing this zio and all of its children * using the zfs_dbgmsg() interface then post deadman event for the ZED. */ void zio_deadman(zio_t *pio, const char *tag) { spa_t *spa = pio->io_spa; char *name = spa_name(spa); if (!zfs_deadman_enabled || spa_suspended(spa)) return; zio_deadman_impl(pio, 0); switch (spa_get_deadman_failmode(spa)) { case ZIO_FAILURE_MODE_WAIT: zfs_dbgmsg("%s waiting for hung I/O to pool '%s'", tag, name); break; case ZIO_FAILURE_MODE_CONTINUE: zfs_dbgmsg("%s restarting hung I/O for pool '%s'", tag, name); break; case ZIO_FAILURE_MODE_PANIC: fm_panic("%s determined I/O to pool '%s' is hung.", tag, name); break; } } /* * Execute the I/O pipeline until one of the following occurs: * (1) the I/O completes; (2) the pipeline stalls waiting for * dependent child I/Os; (3) the I/O issues, so we're waiting * for an I/O completion interrupt; (4) the I/O is delegated by * vdev-level caching or aggregation; (5) the I/O is deferred * due to vdev-level queueing; (6) the I/O is handed off to * another thread. In all cases, the pipeline stops whenever * there's no CPU work; it never burns a thread in cv_wait_io(). * * There's no locking on io_stage because there's no legitimate way * for multiple threads to be attempting to process the same I/O. */ static zio_pipe_stage_t *zio_pipeline[]; /* * zio_execute() is a wrapper around the static function * __zio_execute() so that we can force __zio_execute() to be * inlined. This reduces stack overhead which is important * because __zio_execute() is called recursively in several zio * code paths. zio_execute() itself cannot be inlined because * it is externally visible. */ void zio_execute(void *zio) { fstrans_cookie_t cookie; cookie = spl_fstrans_mark(); __zio_execute(zio); spl_fstrans_unmark(cookie); } /* * Used to determine if in the current context the stack is sized large * enough to allow zio_execute() to be called recursively. A minimum * stack size of 16K is required to avoid needing to re-dispatch the zio. */ static boolean_t zio_execute_stack_check(zio_t *zio) { #if !defined(HAVE_LARGE_STACKS) dsl_pool_t *dp = spa_get_dsl(zio->io_spa); /* Executing in txg_sync_thread() context. */ if (dp && curthread == dp->dp_tx.tx_sync_thread) return (B_TRUE); /* Pool initialization outside of zio_taskq context. */ if (dp && spa_is_initializing(dp->dp_spa) && !zio_taskq_member(zio, ZIO_TASKQ_ISSUE) && !zio_taskq_member(zio, ZIO_TASKQ_ISSUE_HIGH)) return (B_TRUE); #else (void) zio; #endif /* HAVE_LARGE_STACKS */ return (B_FALSE); } __attribute__((always_inline)) static inline void __zio_execute(zio_t *zio) { ASSERT3U(zio->io_queued_timestamp, >, 0); while (zio->io_stage < ZIO_STAGE_DONE) { enum zio_stage pipeline = zio->io_pipeline; enum zio_stage stage = zio->io_stage; zio->io_executor = curthread; ASSERT(!MUTEX_HELD(&zio->io_lock)); ASSERT(ISP2(stage)); ASSERT(zio->io_stall == NULL); do { stage <<= 1; } while ((stage & pipeline) == 0); ASSERT(stage <= ZIO_STAGE_DONE); /* * If we are in interrupt context and this pipeline stage * will grab a config lock that is held across I/O, * or may wait for an I/O that needs an interrupt thread * to complete, issue async to avoid deadlock. * * For VDEV_IO_START, we cut in line so that the io will * be sent to disk promptly. */ if ((stage & ZIO_BLOCKING_STAGES) && zio->io_vd == NULL && zio_taskq_member(zio, ZIO_TASKQ_INTERRUPT)) { boolean_t cut = (stage == ZIO_STAGE_VDEV_IO_START) ? zio_requeue_io_start_cut_in_line : B_FALSE; zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, cut); return; } /* * If the current context doesn't have large enough stacks * the zio must be issued asynchronously to prevent overflow. */ if (zio_execute_stack_check(zio)) { boolean_t cut = (stage == ZIO_STAGE_VDEV_IO_START) ? zio_requeue_io_start_cut_in_line : B_FALSE; zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, cut); return; } zio->io_stage = stage; zio->io_pipeline_trace |= zio->io_stage; /* * The zio pipeline stage returns the next zio to execute * (typically the same as this one), or NULL if we should * stop. */ zio = zio_pipeline[highbit64(stage) - 1](zio); if (zio == NULL) return; } } /* * ========================================================================== * Initiate I/O, either sync or async * ========================================================================== */ int zio_wait(zio_t *zio) { /* * Some routines, like zio_free_sync(), may return a NULL zio * to avoid the performance overhead of creating and then destroying * an unneeded zio. For the callers' simplicity, we accept a NULL * zio and ignore it. */ if (zio == NULL) return (0); long timeout = MSEC_TO_TICK(zfs_deadman_ziotime_ms); int error; ASSERT3S(zio->io_stage, ==, ZIO_STAGE_OPEN); ASSERT3P(zio->io_executor, ==, NULL); zio->io_waiter = curthread; ASSERT0(zio->io_queued_timestamp); zio->io_queued_timestamp = gethrtime(); if (zio->io_type == ZIO_TYPE_WRITE) { spa_select_allocator(zio); } __zio_execute(zio); mutex_enter(&zio->io_lock); while (zio->io_executor != NULL) { error = cv_timedwait_io(&zio->io_cv, &zio->io_lock, ddi_get_lbolt() + timeout); if (zfs_deadman_enabled && error == -1 && gethrtime() - zio->io_queued_timestamp > spa_deadman_ziotime(zio->io_spa)) { mutex_exit(&zio->io_lock); timeout = MSEC_TO_TICK(zfs_deadman_checktime_ms); zio_deadman(zio, FTAG); mutex_enter(&zio->io_lock); } } mutex_exit(&zio->io_lock); error = zio->io_error; zio_destroy(zio); return (error); } void zio_nowait(zio_t *zio) { /* * See comment in zio_wait(). */ if (zio == NULL) return; ASSERT3P(zio->io_executor, ==, NULL); if (zio->io_child_type == ZIO_CHILD_LOGICAL && list_is_empty(&zio->io_parent_list)) { zio_t *pio; /* * This is a logical async I/O with no parent to wait for it. * We add it to the spa_async_root_zio "Godfather" I/O which * will ensure they complete prior to unloading the pool. */ spa_t *spa = zio->io_spa; pio = spa->spa_async_zio_root[CPU_SEQID_UNSTABLE]; zio_add_child(pio, zio); } ASSERT0(zio->io_queued_timestamp); zio->io_queued_timestamp = gethrtime(); if (zio->io_type == ZIO_TYPE_WRITE) { spa_select_allocator(zio); } __zio_execute(zio); } /* * ========================================================================== * Reexecute, cancel, or suspend/resume failed I/O * ========================================================================== */ static void zio_reexecute(void *arg) { zio_t *pio = arg; zio_t *cio, *cio_next, *gio; ASSERT(pio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(pio->io_orig_stage == ZIO_STAGE_OPEN); ASSERT(pio->io_gang_leader == NULL); ASSERT(pio->io_gang_tree == NULL); mutex_enter(&pio->io_lock); pio->io_flags = pio->io_orig_flags; pio->io_stage = pio->io_orig_stage; pio->io_pipeline = pio->io_orig_pipeline; pio->io_reexecute = 0; pio->io_flags |= ZIO_FLAG_REEXECUTED; pio->io_pipeline_trace = 0; pio->io_error = 0; pio->io_state[ZIO_WAIT_READY] = (pio->io_stage >= ZIO_STAGE_READY) || (pio->io_pipeline & ZIO_STAGE_READY) == 0; pio->io_state[ZIO_WAIT_DONE] = (pio->io_stage >= ZIO_STAGE_DONE); zio_link_t *zl = NULL; while ((gio = zio_walk_parents(pio, &zl)) != NULL) { for (int w = 0; w < ZIO_WAIT_TYPES; w++) { gio->io_children[pio->io_child_type][w] += !pio->io_state[w]; } } for (int c = 0; c < ZIO_CHILD_TYPES; c++) pio->io_child_error[c] = 0; if (IO_IS_ALLOCATING(pio)) BP_ZERO(pio->io_bp); /* * As we reexecute pio's children, new children could be created. * New children go to the head of pio's io_child_list, however, * so we will (correctly) not reexecute them. The key is that * the remainder of pio's io_child_list, from 'cio_next' onward, * cannot be affected by any side effects of reexecuting 'cio'. */ zl = NULL; for (cio = zio_walk_children(pio, &zl); cio != NULL; cio = cio_next) { cio_next = zio_walk_children(pio, &zl); mutex_exit(&pio->io_lock); zio_reexecute(cio); mutex_enter(&pio->io_lock); } mutex_exit(&pio->io_lock); /* * Now that all children have been reexecuted, execute the parent. * We don't reexecute "The Godfather" I/O here as it's the * responsibility of the caller to wait on it. */ if (!(pio->io_flags & ZIO_FLAG_GODFATHER)) { pio->io_queued_timestamp = gethrtime(); __zio_execute(pio); } } void zio_suspend(spa_t *spa, zio_t *zio, zio_suspend_reason_t reason) { if (spa_get_failmode(spa) == ZIO_FAILURE_MODE_PANIC) fm_panic("Pool '%s' has encountered an uncorrectable I/O " "failure and the failure mode property for this pool " "is set to panic.", spa_name(spa)); if (reason != ZIO_SUSPEND_MMP) { cmn_err(CE_WARN, "Pool '%s' has encountered an uncorrectable " "I/O failure and has been suspended.\n", spa_name(spa)); } (void) zfs_ereport_post(FM_EREPORT_ZFS_IO_FAILURE, spa, NULL, NULL, NULL, 0); mutex_enter(&spa->spa_suspend_lock); if (spa->spa_suspend_zio_root == NULL) spa->spa_suspend_zio_root = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_GODFATHER); spa->spa_suspended = reason; if (zio != NULL) { ASSERT(!(zio->io_flags & ZIO_FLAG_GODFATHER)); ASSERT(zio != spa->spa_suspend_zio_root); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ASSERT(zio_unique_parent(zio) == NULL); ASSERT(zio->io_stage == ZIO_STAGE_DONE); zio_add_child(spa->spa_suspend_zio_root, zio); } mutex_exit(&spa->spa_suspend_lock); } int zio_resume(spa_t *spa) { zio_t *pio; /* * Reexecute all previously suspended i/o. */ mutex_enter(&spa->spa_suspend_lock); spa->spa_suspended = ZIO_SUSPEND_NONE; cv_broadcast(&spa->spa_suspend_cv); pio = spa->spa_suspend_zio_root; spa->spa_suspend_zio_root = NULL; mutex_exit(&spa->spa_suspend_lock); if (pio == NULL) return (0); zio_reexecute(pio); return (zio_wait(pio)); } void zio_resume_wait(spa_t *spa) { mutex_enter(&spa->spa_suspend_lock); while (spa_suspended(spa)) cv_wait(&spa->spa_suspend_cv, &spa->spa_suspend_lock); mutex_exit(&spa->spa_suspend_lock); } /* * ========================================================================== * Gang blocks. * * A gang block is a collection of small blocks that looks to the DMU * like one large block. When zio_dva_allocate() cannot find a block * of the requested size, due to either severe fragmentation or the pool * being nearly full, it calls zio_write_gang_block() to construct the * block from smaller fragments. * * A gang block consists of a gang header (zio_gbh_phys_t) and up to * three (SPA_GBH_NBLKPTRS) gang members. The gang header is just like * an indirect block: it's an array of block pointers. It consumes * only one sector and hence is allocatable regardless of fragmentation. * The gang header's bps point to its gang members, which hold the data. * * Gang blocks are self-checksumming, using the bp's * as the verifier to ensure uniqueness of the SHA256 checksum. * Critically, the gang block bp's blk_cksum is the checksum of the data, * not the gang header. This ensures that data block signatures (needed for * deduplication) are independent of how the block is physically stored. * * Gang blocks can be nested: a gang member may itself be a gang block. * Thus every gang block is a tree in which root and all interior nodes are * gang headers, and the leaves are normal blocks that contain user data. * The root of the gang tree is called the gang leader. * * To perform any operation (read, rewrite, free, claim) on a gang block, * zio_gang_assemble() first assembles the gang tree (minus data leaves) * in the io_gang_tree field of the original logical i/o by recursively * reading the gang leader and all gang headers below it. This yields * an in-core tree containing the contents of every gang header and the * bps for every constituent of the gang block. * * With the gang tree now assembled, zio_gang_issue() just walks the gang tree * and invokes a callback on each bp. To free a gang block, zio_gang_issue() * calls zio_free_gang() -- a trivial wrapper around zio_free() -- for each bp. * zio_claim_gang() provides a similarly trivial wrapper for zio_claim(). * zio_read_gang() is a wrapper around zio_read() that omits reading gang * headers, since we already have those in io_gang_tree. zio_rewrite_gang() * performs a zio_rewrite() of the data or, for gang headers, a zio_rewrite() * of the gang header plus zio_checksum_compute() of the data to update the * gang header's blk_cksum as described above. * * The two-phase assemble/issue model solves the problem of partial failure -- * what if you'd freed part of a gang block but then couldn't read the * gang header for another part? Assembling the entire gang tree first * ensures that all the necessary gang header I/O has succeeded before * starting the actual work of free, claim, or write. Once the gang tree * is assembled, free and claim are in-memory operations that cannot fail. * * In the event that a gang write fails, zio_dva_unallocate() walks the * gang tree to immediately free (i.e. insert back into the space map) * everything we've allocated. This ensures that we don't get ENOSPC * errors during repeated suspend/resume cycles due to a flaky device. * * Gang rewrites only happen during sync-to-convergence. If we can't assemble * the gang tree, we won't modify the block, so we can safely defer the free * (knowing that the block is still intact). If we *can* assemble the gang * tree, then even if some of the rewrites fail, zio_dva_unallocate() will free * each constituent bp and we can allocate a new block on the next sync pass. * * In all cases, the gang tree allows complete recovery from partial failure. * ========================================================================== */ static void zio_gang_issue_func_done(zio_t *zio) { abd_free(zio->io_abd); } static zio_t * zio_read_gang(zio_t *pio, blkptr_t *bp, zio_gang_node_t *gn, abd_t *data, uint64_t offset) { if (gn != NULL) return (pio); return (zio_read(pio, pio->io_spa, bp, abd_get_offset(data, offset), BP_GET_PSIZE(bp), zio_gang_issue_func_done, NULL, pio->io_priority, ZIO_GANG_CHILD_FLAGS(pio), &pio->io_bookmark)); } static zio_t * zio_rewrite_gang(zio_t *pio, blkptr_t *bp, zio_gang_node_t *gn, abd_t *data, uint64_t offset) { zio_t *zio; if (gn != NULL) { abd_t *gbh_abd = abd_get_from_buf(gn->gn_gbh, SPA_GANGBLOCKSIZE); zio = zio_rewrite(pio, pio->io_spa, pio->io_txg, bp, gbh_abd, SPA_GANGBLOCKSIZE, zio_gang_issue_func_done, NULL, pio->io_priority, ZIO_GANG_CHILD_FLAGS(pio), &pio->io_bookmark); /* * As we rewrite each gang header, the pipeline will compute * a new gang block header checksum for it; but no one will * compute a new data checksum, so we do that here. The one * exception is the gang leader: the pipeline already computed * its data checksum because that stage precedes gang assembly. * (Presently, nothing actually uses interior data checksums; * this is just good hygiene.) */ if (gn != pio->io_gang_leader->io_gang_tree) { abd_t *buf = abd_get_offset(data, offset); zio_checksum_compute(zio, BP_GET_CHECKSUM(bp), buf, BP_GET_PSIZE(bp)); abd_free(buf); } /* * If we are here to damage data for testing purposes, * leave the GBH alone so that we can detect the damage. */ if (pio->io_gang_leader->io_flags & ZIO_FLAG_INDUCE_DAMAGE) zio->io_pipeline &= ~ZIO_VDEV_IO_STAGES; } else { zio = zio_rewrite(pio, pio->io_spa, pio->io_txg, bp, abd_get_offset(data, offset), BP_GET_PSIZE(bp), zio_gang_issue_func_done, NULL, pio->io_priority, ZIO_GANG_CHILD_FLAGS(pio), &pio->io_bookmark); } return (zio); } static zio_t * zio_free_gang(zio_t *pio, blkptr_t *bp, zio_gang_node_t *gn, abd_t *data, uint64_t offset) { (void) gn, (void) data, (void) offset; zio_t *zio = zio_free_sync(pio, pio->io_spa, pio->io_txg, bp, ZIO_GANG_CHILD_FLAGS(pio)); if (zio == NULL) { zio = zio_null(pio, pio->io_spa, NULL, NULL, NULL, ZIO_GANG_CHILD_FLAGS(pio)); } return (zio); } static zio_t * zio_claim_gang(zio_t *pio, blkptr_t *bp, zio_gang_node_t *gn, abd_t *data, uint64_t offset) { (void) gn, (void) data, (void) offset; return (zio_claim(pio, pio->io_spa, pio->io_txg, bp, NULL, NULL, ZIO_GANG_CHILD_FLAGS(pio))); } static zio_gang_issue_func_t *zio_gang_issue_func[ZIO_TYPES] = { NULL, zio_read_gang, zio_rewrite_gang, zio_free_gang, zio_claim_gang, NULL }; static void zio_gang_tree_assemble_done(zio_t *zio); static zio_gang_node_t * zio_gang_node_alloc(zio_gang_node_t **gnpp) { zio_gang_node_t *gn; ASSERT(*gnpp == NULL); gn = kmem_zalloc(sizeof (*gn), KM_SLEEP); gn->gn_gbh = zio_buf_alloc(SPA_GANGBLOCKSIZE); *gnpp = gn; return (gn); } static void zio_gang_node_free(zio_gang_node_t **gnpp) { zio_gang_node_t *gn = *gnpp; for (int g = 0; g < SPA_GBH_NBLKPTRS; g++) ASSERT(gn->gn_child[g] == NULL); zio_buf_free(gn->gn_gbh, SPA_GANGBLOCKSIZE); kmem_free(gn, sizeof (*gn)); *gnpp = NULL; } static void zio_gang_tree_free(zio_gang_node_t **gnpp) { zio_gang_node_t *gn = *gnpp; if (gn == NULL) return; for (int g = 0; g < SPA_GBH_NBLKPTRS; g++) zio_gang_tree_free(&gn->gn_child[g]); zio_gang_node_free(gnpp); } static void zio_gang_tree_assemble(zio_t *gio, blkptr_t *bp, zio_gang_node_t **gnpp) { zio_gang_node_t *gn = zio_gang_node_alloc(gnpp); abd_t *gbh_abd = abd_get_from_buf(gn->gn_gbh, SPA_GANGBLOCKSIZE); ASSERT(gio->io_gang_leader == gio); ASSERT(BP_IS_GANG(bp)); zio_nowait(zio_read(gio, gio->io_spa, bp, gbh_abd, SPA_GANGBLOCKSIZE, zio_gang_tree_assemble_done, gn, gio->io_priority, ZIO_GANG_CHILD_FLAGS(gio), &gio->io_bookmark)); } static void zio_gang_tree_assemble_done(zio_t *zio) { zio_t *gio = zio->io_gang_leader; zio_gang_node_t *gn = zio->io_private; blkptr_t *bp = zio->io_bp; ASSERT(gio == zio_unique_parent(zio)); ASSERT(list_is_empty(&zio->io_child_list)); if (zio->io_error) return; /* this ABD was created from a linear buf in zio_gang_tree_assemble */ if (BP_SHOULD_BYTESWAP(bp)) byteswap_uint64_array(abd_to_buf(zio->io_abd), zio->io_size); ASSERT3P(abd_to_buf(zio->io_abd), ==, gn->gn_gbh); ASSERT(zio->io_size == SPA_GANGBLOCKSIZE); ASSERT(gn->gn_gbh->zg_tail.zec_magic == ZEC_MAGIC); abd_free(zio->io_abd); for (int g = 0; g < SPA_GBH_NBLKPTRS; g++) { blkptr_t *gbp = &gn->gn_gbh->zg_blkptr[g]; if (!BP_IS_GANG(gbp)) continue; zio_gang_tree_assemble(gio, gbp, &gn->gn_child[g]); } } static void zio_gang_tree_issue(zio_t *pio, zio_gang_node_t *gn, blkptr_t *bp, abd_t *data, uint64_t offset) { zio_t *gio = pio->io_gang_leader; zio_t *zio; ASSERT(BP_IS_GANG(bp) == !!gn); ASSERT(BP_GET_CHECKSUM(bp) == BP_GET_CHECKSUM(gio->io_bp)); ASSERT(BP_GET_LSIZE(bp) == BP_GET_PSIZE(bp) || gn == gio->io_gang_tree); /* * If you're a gang header, your data is in gn->gn_gbh. * If you're a gang member, your data is in 'data' and gn == NULL. */ zio = zio_gang_issue_func[gio->io_type](pio, bp, gn, data, offset); if (gn != NULL) { ASSERT(gn->gn_gbh->zg_tail.zec_magic == ZEC_MAGIC); for (int g = 0; g < SPA_GBH_NBLKPTRS; g++) { blkptr_t *gbp = &gn->gn_gbh->zg_blkptr[g]; if (BP_IS_HOLE(gbp)) continue; zio_gang_tree_issue(zio, gn->gn_child[g], gbp, data, offset); offset += BP_GET_PSIZE(gbp); } } if (gn == gio->io_gang_tree) ASSERT3U(gio->io_size, ==, offset); if (zio != pio) zio_nowait(zio); } static zio_t * zio_gang_assemble(zio_t *zio) { blkptr_t *bp = zio->io_bp; ASSERT(BP_IS_GANG(bp) && zio->io_gang_leader == NULL); ASSERT(zio->io_child_type > ZIO_CHILD_GANG); zio->io_gang_leader = zio; zio_gang_tree_assemble(zio, bp, &zio->io_gang_tree); return (zio); } static zio_t * zio_gang_issue(zio_t *zio) { blkptr_t *bp = zio->io_bp; if (zio_wait_for_children(zio, ZIO_CHILD_GANG_BIT, ZIO_WAIT_DONE)) { return (NULL); } ASSERT(BP_IS_GANG(bp) && zio->io_gang_leader == zio); ASSERT(zio->io_child_type > ZIO_CHILD_GANG); if (zio->io_child_error[ZIO_CHILD_GANG] == 0) zio_gang_tree_issue(zio, zio->io_gang_tree, bp, zio->io_abd, 0); else zio_gang_tree_free(&zio->io_gang_tree); zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; return (zio); } static void zio_gang_inherit_allocator(zio_t *pio, zio_t *cio) { cio->io_allocator = pio->io_allocator; } static void zio_write_gang_member_ready(zio_t *zio) { zio_t *pio = zio_unique_parent(zio); dva_t *cdva = zio->io_bp->blk_dva; dva_t *pdva = pio->io_bp->blk_dva; uint64_t asize; zio_t *gio __maybe_unused = zio->io_gang_leader; if (BP_IS_HOLE(zio->io_bp)) return; ASSERT(BP_IS_HOLE(&zio->io_bp_orig)); ASSERT(zio->io_child_type == ZIO_CHILD_GANG); ASSERT3U(zio->io_prop.zp_copies, ==, gio->io_prop.zp_copies); ASSERT3U(zio->io_prop.zp_copies, <=, BP_GET_NDVAS(zio->io_bp)); ASSERT3U(pio->io_prop.zp_copies, <=, BP_GET_NDVAS(pio->io_bp)); VERIFY3U(BP_GET_NDVAS(zio->io_bp), <=, BP_GET_NDVAS(pio->io_bp)); mutex_enter(&pio->io_lock); for (int d = 0; d < BP_GET_NDVAS(zio->io_bp); d++) { ASSERT(DVA_GET_GANG(&pdva[d])); asize = DVA_GET_ASIZE(&pdva[d]); asize += DVA_GET_ASIZE(&cdva[d]); DVA_SET_ASIZE(&pdva[d], asize); } mutex_exit(&pio->io_lock); } static void zio_write_gang_done(zio_t *zio) { /* * The io_abd field will be NULL for a zio with no data. The io_flags * will initially have the ZIO_FLAG_NODATA bit flag set, but we can't * check for it here as it is cleared in zio_ready. */ if (zio->io_abd != NULL) abd_free(zio->io_abd); } static zio_t * zio_write_gang_block(zio_t *pio, metaslab_class_t *mc) { spa_t *spa = pio->io_spa; blkptr_t *bp = pio->io_bp; zio_t *gio = pio->io_gang_leader; zio_t *zio; zio_gang_node_t *gn, **gnpp; zio_gbh_phys_t *gbh; abd_t *gbh_abd; uint64_t txg = pio->io_txg; uint64_t resid = pio->io_size; uint64_t lsize; int copies = gio->io_prop.zp_copies; zio_prop_t zp; int error; boolean_t has_data = !(pio->io_flags & ZIO_FLAG_NODATA); /* * If one copy was requested, store 2 copies of the GBH, so that we * can still traverse all the data (e.g. to free or scrub) even if a * block is damaged. Note that we can't store 3 copies of the GBH in * all cases, e.g. with encryption, which uses DVA[2] for the IV+salt. */ int gbh_copies = copies; if (gbh_copies == 1) { gbh_copies = MIN(2, spa_max_replication(spa)); } ASSERT(ZIO_HAS_ALLOCATOR(pio)); int flags = METASLAB_HINTBP_FAVOR | METASLAB_GANG_HEADER; if (pio->io_flags & ZIO_FLAG_IO_ALLOCATING) { ASSERT(pio->io_priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(has_data); flags |= METASLAB_ASYNC_ALLOC; VERIFY(zfs_refcount_held(&mc->mc_allocator[pio->io_allocator]. mca_alloc_slots, pio)); /* * The logical zio has already placed a reservation for * 'copies' allocation slots but gang blocks may require * additional copies. These additional copies * (i.e. gbh_copies - copies) are guaranteed to succeed * since metaslab_class_throttle_reserve() always allows * additional reservations for gang blocks. */ VERIFY(metaslab_class_throttle_reserve(mc, gbh_copies - copies, pio->io_allocator, pio, flags)); } error = metaslab_alloc(spa, mc, SPA_GANGBLOCKSIZE, bp, gbh_copies, txg, pio == gio ? NULL : gio->io_bp, flags, &pio->io_alloc_list, pio, pio->io_allocator); if (error) { if (pio->io_flags & ZIO_FLAG_IO_ALLOCATING) { ASSERT(pio->io_priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(has_data); /* * If we failed to allocate the gang block header then * we remove any additional allocation reservations that * we placed here. The original reservation will * be removed when the logical I/O goes to the ready * stage. */ metaslab_class_throttle_unreserve(mc, gbh_copies - copies, pio->io_allocator, pio); } pio->io_error = error; return (pio); } if (pio == gio) { gnpp = &gio->io_gang_tree; } else { gnpp = pio->io_private; ASSERT(pio->io_ready == zio_write_gang_member_ready); } gn = zio_gang_node_alloc(gnpp); gbh = gn->gn_gbh; memset(gbh, 0, SPA_GANGBLOCKSIZE); gbh_abd = abd_get_from_buf(gbh, SPA_GANGBLOCKSIZE); /* * Create the gang header. */ zio = zio_rewrite(pio, spa, txg, bp, gbh_abd, SPA_GANGBLOCKSIZE, zio_write_gang_done, NULL, pio->io_priority, ZIO_GANG_CHILD_FLAGS(pio), &pio->io_bookmark); zio_gang_inherit_allocator(pio, zio); /* * Create and nowait the gang children. */ for (int g = 0; resid != 0; resid -= lsize, g++) { lsize = P2ROUNDUP(resid / (SPA_GBH_NBLKPTRS - g), SPA_MINBLOCKSIZE); ASSERT(lsize >= SPA_MINBLOCKSIZE && lsize <= resid); zp.zp_checksum = gio->io_prop.zp_checksum; zp.zp_compress = ZIO_COMPRESS_OFF; zp.zp_complevel = gio->io_prop.zp_complevel; zp.zp_type = DMU_OT_NONE; zp.zp_level = 0; zp.zp_copies = gio->io_prop.zp_copies; zp.zp_dedup = B_FALSE; zp.zp_dedup_verify = B_FALSE; zp.zp_nopwrite = B_FALSE; zp.zp_encrypt = gio->io_prop.zp_encrypt; zp.zp_byteorder = gio->io_prop.zp_byteorder; memset(zp.zp_salt, 0, ZIO_DATA_SALT_LEN); memset(zp.zp_iv, 0, ZIO_DATA_IV_LEN); memset(zp.zp_mac, 0, ZIO_DATA_MAC_LEN); zio_t *cio = zio_write(zio, spa, txg, &gbh->zg_blkptr[g], has_data ? abd_get_offset(pio->io_abd, pio->io_size - resid) : NULL, lsize, lsize, &zp, zio_write_gang_member_ready, NULL, zio_write_gang_done, &gn->gn_child[g], pio->io_priority, ZIO_GANG_CHILD_FLAGS(pio), &pio->io_bookmark); zio_gang_inherit_allocator(zio, cio); if (pio->io_flags & ZIO_FLAG_IO_ALLOCATING) { ASSERT(pio->io_priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(has_data); /* * Gang children won't throttle but we should * account for their work, so reserve an allocation * slot for them here. */ VERIFY(metaslab_class_throttle_reserve(mc, zp.zp_copies, cio->io_allocator, cio, flags)); } zio_nowait(cio); } /* * Set pio's pipeline to just wait for zio to finish. */ pio->io_pipeline = ZIO_INTERLOCK_PIPELINE; zio_nowait(zio); return (pio); } /* * The zio_nop_write stage in the pipeline determines if allocating a * new bp is necessary. The nopwrite feature can handle writes in * either syncing or open context (i.e. zil writes) and as a result is * mutually exclusive with dedup. * * By leveraging a cryptographically secure checksum, such as SHA256, we * can compare the checksums of the new data and the old to determine if * allocating a new block is required. Note that our requirements for * cryptographic strength are fairly weak: there can't be any accidental * hash collisions, but we don't need to be secure against intentional * (malicious) collisions. To trigger a nopwrite, you have to be able * to write the file to begin with, and triggering an incorrect (hash * collision) nopwrite is no worse than simply writing to the file. * That said, there are no known attacks against the checksum algorithms * used for nopwrite, assuming that the salt and the checksums * themselves remain secret. */ static zio_t * zio_nop_write(zio_t *zio) { blkptr_t *bp = zio->io_bp; blkptr_t *bp_orig = &zio->io_bp_orig; zio_prop_t *zp = &zio->io_prop; ASSERT(BP_IS_HOLE(bp)); ASSERT(BP_GET_LEVEL(bp) == 0); ASSERT(!(zio->io_flags & ZIO_FLAG_IO_REWRITE)); ASSERT(zp->zp_nopwrite); ASSERT(!zp->zp_dedup); ASSERT(zio->io_bp_override == NULL); ASSERT(IO_IS_ALLOCATING(zio)); /* * Check to see if the original bp and the new bp have matching * characteristics (i.e. same checksum, compression algorithms, etc). * If they don't then just continue with the pipeline which will * allocate a new bp. */ if (BP_IS_HOLE(bp_orig) || !(zio_checksum_table[BP_GET_CHECKSUM(bp)].ci_flags & ZCHECKSUM_FLAG_NOPWRITE) || BP_IS_ENCRYPTED(bp) || BP_IS_ENCRYPTED(bp_orig) || BP_GET_CHECKSUM(bp) != BP_GET_CHECKSUM(bp_orig) || BP_GET_COMPRESS(bp) != BP_GET_COMPRESS(bp_orig) || BP_GET_DEDUP(bp) != BP_GET_DEDUP(bp_orig) || zp->zp_copies != BP_GET_NDVAS(bp_orig)) return (zio); /* * If the checksums match then reset the pipeline so that we * avoid allocating a new bp and issuing any I/O. */ if (ZIO_CHECKSUM_EQUAL(bp->blk_cksum, bp_orig->blk_cksum)) { ASSERT(zio_checksum_table[zp->zp_checksum].ci_flags & ZCHECKSUM_FLAG_NOPWRITE); ASSERT3U(BP_GET_PSIZE(bp), ==, BP_GET_PSIZE(bp_orig)); ASSERT3U(BP_GET_LSIZE(bp), ==, BP_GET_LSIZE(bp_orig)); ASSERT(zp->zp_compress != ZIO_COMPRESS_OFF); ASSERT3U(bp->blk_prop, ==, bp_orig->blk_prop); /* * If we're overwriting a block that is currently on an * indirect vdev, then ignore the nopwrite request and * allow a new block to be allocated on a concrete vdev. */ spa_config_enter(zio->io_spa, SCL_VDEV, FTAG, RW_READER); for (int d = 0; d < BP_GET_NDVAS(bp_orig); d++) { vdev_t *tvd = vdev_lookup_top(zio->io_spa, DVA_GET_VDEV(&bp_orig->blk_dva[d])); if (tvd->vdev_ops == &vdev_indirect_ops) { spa_config_exit(zio->io_spa, SCL_VDEV, FTAG); return (zio); } } spa_config_exit(zio->io_spa, SCL_VDEV, FTAG); *bp = *bp_orig; zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; zio->io_flags |= ZIO_FLAG_NOPWRITE; } return (zio); } /* * ========================================================================== * Block Reference Table * ========================================================================== */ static zio_t * zio_brt_free(zio_t *zio) { blkptr_t *bp; bp = zio->io_bp; if (BP_GET_LEVEL(bp) > 0 || BP_IS_METADATA(bp) || !brt_maybe_exists(zio->io_spa, bp)) { return (zio); } if (!brt_entry_decref(zio->io_spa, bp)) { /* * This isn't the last reference, so we cannot free * the data yet. */ zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; } return (zio); } /* * ========================================================================== * Dedup * ========================================================================== */ static void zio_ddt_child_read_done(zio_t *zio) { blkptr_t *bp = zio->io_bp; ddt_entry_t *dde = zio->io_private; ddt_phys_t *ddp; zio_t *pio = zio_unique_parent(zio); mutex_enter(&pio->io_lock); ddp = ddt_phys_select(dde, bp); if (zio->io_error == 0) ddt_phys_clear(ddp); /* this ddp doesn't need repair */ if (zio->io_error == 0 && dde->dde_repair_abd == NULL) dde->dde_repair_abd = zio->io_abd; else abd_free(zio->io_abd); mutex_exit(&pio->io_lock); } static zio_t * zio_ddt_read_start(zio_t *zio) { blkptr_t *bp = zio->io_bp; ASSERT(BP_GET_DEDUP(bp)); ASSERT(BP_GET_PSIZE(bp) == zio->io_size); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); if (zio->io_child_error[ZIO_CHILD_DDT]) { ddt_t *ddt = ddt_select(zio->io_spa, bp); ddt_entry_t *dde = ddt_repair_start(ddt, bp); ddt_phys_t *ddp = dde->dde_phys; ddt_phys_t *ddp_self = ddt_phys_select(dde, bp); blkptr_t blk; ASSERT(zio->io_vsd == NULL); zio->io_vsd = dde; if (ddp_self == NULL) return (zio); for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) { if (ddp->ddp_phys_birth == 0 || ddp == ddp_self) continue; ddt_bp_create(ddt->ddt_checksum, &dde->dde_key, ddp, &blk); zio_nowait(zio_read(zio, zio->io_spa, &blk, abd_alloc_for_io(zio->io_size, B_TRUE), zio->io_size, zio_ddt_child_read_done, dde, zio->io_priority, ZIO_DDT_CHILD_FLAGS(zio) | ZIO_FLAG_DONT_PROPAGATE, &zio->io_bookmark)); } return (zio); } zio_nowait(zio_read(zio, zio->io_spa, bp, zio->io_abd, zio->io_size, NULL, NULL, zio->io_priority, ZIO_DDT_CHILD_FLAGS(zio), &zio->io_bookmark)); return (zio); } static zio_t * zio_ddt_read_done(zio_t *zio) { blkptr_t *bp = zio->io_bp; if (zio_wait_for_children(zio, ZIO_CHILD_DDT_BIT, ZIO_WAIT_DONE)) { return (NULL); } ASSERT(BP_GET_DEDUP(bp)); ASSERT(BP_GET_PSIZE(bp) == zio->io_size); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); if (zio->io_child_error[ZIO_CHILD_DDT]) { ddt_t *ddt = ddt_select(zio->io_spa, bp); ddt_entry_t *dde = zio->io_vsd; if (ddt == NULL) { ASSERT(spa_load_state(zio->io_spa) != SPA_LOAD_NONE); return (zio); } if (dde == NULL) { zio->io_stage = ZIO_STAGE_DDT_READ_START >> 1; zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, B_FALSE); return (NULL); } if (dde->dde_repair_abd != NULL) { abd_copy(zio->io_abd, dde->dde_repair_abd, zio->io_size); zio->io_child_error[ZIO_CHILD_DDT] = 0; } ddt_repair_done(ddt, dde); zio->io_vsd = NULL; } ASSERT(zio->io_vsd == NULL); return (zio); } static boolean_t zio_ddt_collision(zio_t *zio, ddt_t *ddt, ddt_entry_t *dde) { spa_t *spa = zio->io_spa; boolean_t do_raw = !!(zio->io_flags & ZIO_FLAG_RAW); ASSERT(!(zio->io_bp_override && do_raw)); /* * Note: we compare the original data, not the transformed data, * because when zio->io_bp is an override bp, we will not have * pushed the I/O transforms. That's an important optimization * because otherwise we'd compress/encrypt all dmu_sync() data twice. * However, we should never get a raw, override zio so in these * cases we can compare the io_abd directly. This is useful because * it allows us to do dedup verification even if we don't have access * to the original data (for instance, if the encryption keys aren't * loaded). */ for (int p = DDT_PHYS_SINGLE; p <= DDT_PHYS_TRIPLE; p++) { zio_t *lio = dde->dde_lead_zio[p]; if (lio != NULL && do_raw) { return (lio->io_size != zio->io_size || abd_cmp(zio->io_abd, lio->io_abd) != 0); } else if (lio != NULL) { return (lio->io_orig_size != zio->io_orig_size || abd_cmp(zio->io_orig_abd, lio->io_orig_abd) != 0); } } for (int p = DDT_PHYS_SINGLE; p <= DDT_PHYS_TRIPLE; p++) { ddt_phys_t *ddp = &dde->dde_phys[p]; if (ddp->ddp_phys_birth != 0 && do_raw) { blkptr_t blk = *zio->io_bp; uint64_t psize; abd_t *tmpabd; int error; ddt_bp_fill(ddp, &blk, ddp->ddp_phys_birth); psize = BP_GET_PSIZE(&blk); if (psize != zio->io_size) return (B_TRUE); ddt_exit(ddt); tmpabd = abd_alloc_for_io(psize, B_TRUE); error = zio_wait(zio_read(NULL, spa, &blk, tmpabd, psize, NULL, NULL, ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_RAW, &zio->io_bookmark)); if (error == 0) { if (abd_cmp(tmpabd, zio->io_abd) != 0) error = SET_ERROR(ENOENT); } abd_free(tmpabd); ddt_enter(ddt); return (error != 0); } else if (ddp->ddp_phys_birth != 0) { arc_buf_t *abuf = NULL; arc_flags_t aflags = ARC_FLAG_WAIT; blkptr_t blk = *zio->io_bp; int error; ddt_bp_fill(ddp, &blk, ddp->ddp_phys_birth); if (BP_GET_LSIZE(&blk) != zio->io_orig_size) return (B_TRUE); ddt_exit(ddt); error = arc_read(NULL, spa, &blk, arc_getbuf_func, &abuf, ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE, &aflags, &zio->io_bookmark); if (error == 0) { if (abd_cmp_buf(zio->io_orig_abd, abuf->b_data, zio->io_orig_size) != 0) error = SET_ERROR(ENOENT); arc_buf_destroy(abuf, &abuf); } ddt_enter(ddt); return (error != 0); } } return (B_FALSE); } static void zio_ddt_child_write_ready(zio_t *zio) { int p = zio->io_prop.zp_copies; ddt_t *ddt = ddt_select(zio->io_spa, zio->io_bp); ddt_entry_t *dde = zio->io_private; ddt_phys_t *ddp = &dde->dde_phys[p]; zio_t *pio; if (zio->io_error) return; ddt_enter(ddt); ASSERT(dde->dde_lead_zio[p] == zio); ddt_phys_fill(ddp, zio->io_bp); zio_link_t *zl = NULL; while ((pio = zio_walk_parents(zio, &zl)) != NULL) ddt_bp_fill(ddp, pio->io_bp, zio->io_txg); ddt_exit(ddt); } static void zio_ddt_child_write_done(zio_t *zio) { int p = zio->io_prop.zp_copies; ddt_t *ddt = ddt_select(zio->io_spa, zio->io_bp); ddt_entry_t *dde = zio->io_private; ddt_phys_t *ddp = &dde->dde_phys[p]; ddt_enter(ddt); ASSERT(ddp->ddp_refcnt == 0); ASSERT(dde->dde_lead_zio[p] == zio); dde->dde_lead_zio[p] = NULL; if (zio->io_error == 0) { zio_link_t *zl = NULL; while (zio_walk_parents(zio, &zl) != NULL) ddt_phys_addref(ddp); } else { ddt_phys_clear(ddp); } ddt_exit(ddt); } static zio_t * zio_ddt_write(zio_t *zio) { spa_t *spa = zio->io_spa; blkptr_t *bp = zio->io_bp; uint64_t txg = zio->io_txg; zio_prop_t *zp = &zio->io_prop; int p = zp->zp_copies; zio_t *cio = NULL; ddt_t *ddt = ddt_select(spa, bp); ddt_entry_t *dde; ddt_phys_t *ddp; ASSERT(BP_GET_DEDUP(bp)); ASSERT(BP_GET_CHECKSUM(bp) == zp->zp_checksum); ASSERT(BP_IS_HOLE(bp) || zio->io_bp_override); ASSERT(!(zio->io_bp_override && (zio->io_flags & ZIO_FLAG_RAW))); ddt_enter(ddt); dde = ddt_lookup(ddt, bp, B_TRUE); + if (dde == NULL) { + /* DDT size is over its quota so no new entries */ + zp->zp_dedup = B_FALSE; + BP_SET_DEDUP(bp, B_FALSE); + if (zio->io_bp_override == NULL) + zio->io_pipeline = ZIO_WRITE_PIPELINE; + ddt_exit(ddt); + return (zio); + } ddp = &dde->dde_phys[p]; if (zp->zp_dedup_verify && zio_ddt_collision(zio, ddt, dde)) { /* * If we're using a weak checksum, upgrade to a strong checksum * and try again. If we're already using a strong checksum, * we can't resolve it, so just convert to an ordinary write. * (And automatically e-mail a paper to Nature?) */ if (!(zio_checksum_table[zp->zp_checksum].ci_flags & ZCHECKSUM_FLAG_DEDUP)) { zp->zp_checksum = spa_dedup_checksum(spa); zio_pop_transforms(zio); zio->io_stage = ZIO_STAGE_OPEN; BP_ZERO(bp); } else { zp->zp_dedup = B_FALSE; BP_SET_DEDUP(bp, B_FALSE); } ASSERT(!BP_GET_DEDUP(bp)); zio->io_pipeline = ZIO_WRITE_PIPELINE; ddt_exit(ddt); return (zio); } if (ddp->ddp_phys_birth != 0 || dde->dde_lead_zio[p] != NULL) { if (ddp->ddp_phys_birth != 0) ddt_bp_fill(ddp, bp, txg); if (dde->dde_lead_zio[p] != NULL) zio_add_child(zio, dde->dde_lead_zio[p]); else ddt_phys_addref(ddp); } else if (zio->io_bp_override) { ASSERT(BP_GET_LOGICAL_BIRTH(bp) == txg); ASSERT(BP_EQUAL(bp, zio->io_bp_override)); ddt_phys_fill(ddp, bp); ddt_phys_addref(ddp); } else { cio = zio_write(zio, spa, txg, bp, zio->io_orig_abd, zio->io_orig_size, zio->io_orig_size, zp, zio_ddt_child_write_ready, NULL, zio_ddt_child_write_done, dde, zio->io_priority, ZIO_DDT_CHILD_FLAGS(zio), &zio->io_bookmark); zio_push_transform(cio, zio->io_abd, zio->io_size, 0, NULL); dde->dde_lead_zio[p] = cio; } ddt_exit(ddt); zio_nowait(cio); return (zio); } static ddt_entry_t *freedde; /* for debugging */ static zio_t * zio_ddt_free(zio_t *zio) { spa_t *spa = zio->io_spa; blkptr_t *bp = zio->io_bp; ddt_t *ddt = ddt_select(spa, bp); ddt_entry_t *dde; ddt_phys_t *ddp; ASSERT(BP_GET_DEDUP(bp)); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); ddt_enter(ddt); freedde = dde = ddt_lookup(ddt, bp, B_TRUE); if (dde) { ddp = ddt_phys_select(dde, bp); if (ddp) ddt_phys_decref(ddp); } ddt_exit(ddt); return (zio); } /* * ========================================================================== * Allocate and free blocks * ========================================================================== */ static zio_t * zio_io_to_allocate(spa_t *spa, int allocator) { zio_t *zio; ASSERT(MUTEX_HELD(&spa->spa_allocs[allocator].spaa_lock)); zio = avl_first(&spa->spa_allocs[allocator].spaa_tree); if (zio == NULL) return (NULL); ASSERT(IO_IS_ALLOCATING(zio)); ASSERT(ZIO_HAS_ALLOCATOR(zio)); /* * Try to place a reservation for this zio. If we're unable to * reserve then we throttle. */ ASSERT3U(zio->io_allocator, ==, allocator); if (!metaslab_class_throttle_reserve(zio->io_metaslab_class, zio->io_prop.zp_copies, allocator, zio, 0)) { return (NULL); } avl_remove(&spa->spa_allocs[allocator].spaa_tree, zio); ASSERT3U(zio->io_stage, <, ZIO_STAGE_DVA_ALLOCATE); return (zio); } static zio_t * zio_dva_throttle(zio_t *zio) { spa_t *spa = zio->io_spa; zio_t *nio; metaslab_class_t *mc; /* locate an appropriate allocation class */ mc = spa_preferred_class(spa, zio->io_size, zio->io_prop.zp_type, zio->io_prop.zp_level, zio->io_prop.zp_zpl_smallblk); if (zio->io_priority == ZIO_PRIORITY_SYNC_WRITE || !mc->mc_alloc_throttle_enabled || zio->io_child_type == ZIO_CHILD_GANG || zio->io_flags & ZIO_FLAG_NODATA) { return (zio); } ASSERT(zio->io_type == ZIO_TYPE_WRITE); ASSERT(ZIO_HAS_ALLOCATOR(zio)); ASSERT(zio->io_child_type > ZIO_CHILD_GANG); ASSERT3U(zio->io_queued_timestamp, >, 0); ASSERT(zio->io_stage == ZIO_STAGE_DVA_THROTTLE); int allocator = zio->io_allocator; zio->io_metaslab_class = mc; mutex_enter(&spa->spa_allocs[allocator].spaa_lock); avl_add(&spa->spa_allocs[allocator].spaa_tree, zio); nio = zio_io_to_allocate(spa, allocator); mutex_exit(&spa->spa_allocs[allocator].spaa_lock); return (nio); } static void zio_allocate_dispatch(spa_t *spa, int allocator) { zio_t *zio; mutex_enter(&spa->spa_allocs[allocator].spaa_lock); zio = zio_io_to_allocate(spa, allocator); mutex_exit(&spa->spa_allocs[allocator].spaa_lock); if (zio == NULL) return; ASSERT3U(zio->io_stage, ==, ZIO_STAGE_DVA_THROTTLE); ASSERT0(zio->io_error); zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, B_TRUE); } static zio_t * zio_dva_allocate(zio_t *zio) { spa_t *spa = zio->io_spa; metaslab_class_t *mc; blkptr_t *bp = zio->io_bp; int error; int flags = 0; if (zio->io_gang_leader == NULL) { ASSERT(zio->io_child_type > ZIO_CHILD_GANG); zio->io_gang_leader = zio; } ASSERT(BP_IS_HOLE(bp)); ASSERT0(BP_GET_NDVAS(bp)); ASSERT3U(zio->io_prop.zp_copies, >, 0); ASSERT3U(zio->io_prop.zp_copies, <=, spa_max_replication(spa)); ASSERT3U(zio->io_size, ==, BP_GET_PSIZE(bp)); if (zio->io_flags & ZIO_FLAG_NODATA) flags |= METASLAB_DONT_THROTTLE; if (zio->io_flags & ZIO_FLAG_GANG_CHILD) flags |= METASLAB_GANG_CHILD; if (zio->io_priority == ZIO_PRIORITY_ASYNC_WRITE) flags |= METASLAB_ASYNC_ALLOC; /* * if not already chosen, locate an appropriate allocation class */ mc = zio->io_metaslab_class; if (mc == NULL) { mc = spa_preferred_class(spa, zio->io_size, zio->io_prop.zp_type, zio->io_prop.zp_level, zio->io_prop.zp_zpl_smallblk); zio->io_metaslab_class = mc; } /* * Try allocating the block in the usual metaslab class. * If that's full, allocate it in the normal class. * If that's full, allocate as a gang block, * and if all are full, the allocation fails (which shouldn't happen). * * Note that we do not fall back on embedded slog (ZIL) space, to * preserve unfragmented slog space, which is critical for decent * sync write performance. If a log allocation fails, we will fall * back to spa_sync() which is abysmal for performance. */ ASSERT(ZIO_HAS_ALLOCATOR(zio)); error = metaslab_alloc(spa, mc, zio->io_size, bp, zio->io_prop.zp_copies, zio->io_txg, NULL, flags, &zio->io_alloc_list, zio, zio->io_allocator); /* * Fallback to normal class when an alloc class is full */ if (error == ENOSPC && mc != spa_normal_class(spa)) { + /* + * When the dedup or special class is spilling into the normal + * class, there can still be significant space available due + * to deferred frees that are in-flight. We track the txg when + * this occurred and back off adding new DDT entries for a few + * txgs to allow the free blocks to be processed. + */ + if ((mc == spa_dedup_class(spa) || (spa_special_has_ddt(spa) && + mc == spa_special_class(spa))) && + spa->spa_dedup_class_full_txg != zio->io_txg) { + spa->spa_dedup_class_full_txg = zio->io_txg; + zfs_dbgmsg("%s[%d]: %s class spilling, req size %d, " + "%llu allocated of %llu", + spa_name(spa), (int)zio->io_txg, + mc == spa_dedup_class(spa) ? "dedup" : "special", + (int)zio->io_size, + (u_longlong_t)metaslab_class_get_alloc(mc), + (u_longlong_t)metaslab_class_get_space(mc)); + } + /* * If throttling, transfer reservation over to normal class. * The io_allocator slot can remain the same even though we * are switching classes. */ if (mc->mc_alloc_throttle_enabled && (zio->io_flags & ZIO_FLAG_IO_ALLOCATING)) { metaslab_class_throttle_unreserve(mc, zio->io_prop.zp_copies, zio->io_allocator, zio); zio->io_flags &= ~ZIO_FLAG_IO_ALLOCATING; VERIFY(metaslab_class_throttle_reserve( spa_normal_class(spa), zio->io_prop.zp_copies, zio->io_allocator, zio, flags | METASLAB_MUST_RESERVE)); } zio->io_metaslab_class = mc = spa_normal_class(spa); if (zfs_flags & ZFS_DEBUG_METASLAB_ALLOC) { zfs_dbgmsg("%s: metaslab allocation failure, " "trying normal class: zio %px, size %llu, error %d", spa_name(spa), zio, (u_longlong_t)zio->io_size, error); } error = metaslab_alloc(spa, mc, zio->io_size, bp, zio->io_prop.zp_copies, zio->io_txg, NULL, flags, &zio->io_alloc_list, zio, zio->io_allocator); } if (error == ENOSPC && zio->io_size > SPA_MINBLOCKSIZE) { if (zfs_flags & ZFS_DEBUG_METASLAB_ALLOC) { zfs_dbgmsg("%s: metaslab allocation failure, " "trying ganging: zio %px, size %llu, error %d", spa_name(spa), zio, (u_longlong_t)zio->io_size, error); } return (zio_write_gang_block(zio, mc)); } if (error != 0) { if (error != ENOSPC || (zfs_flags & ZFS_DEBUG_METASLAB_ALLOC)) { zfs_dbgmsg("%s: metaslab allocation failure: zio %px, " "size %llu, error %d", spa_name(spa), zio, (u_longlong_t)zio->io_size, error); } zio->io_error = error; } return (zio); } static zio_t * zio_dva_free(zio_t *zio) { metaslab_free(zio->io_spa, zio->io_bp, zio->io_txg, B_FALSE); return (zio); } static zio_t * zio_dva_claim(zio_t *zio) { int error; error = metaslab_claim(zio->io_spa, zio->io_bp, zio->io_txg); if (error) zio->io_error = error; return (zio); } /* * Undo an allocation. This is used by zio_done() when an I/O fails * and we want to give back the block we just allocated. * This handles both normal blocks and gang blocks. */ static void zio_dva_unallocate(zio_t *zio, zio_gang_node_t *gn, blkptr_t *bp) { ASSERT(BP_GET_LOGICAL_BIRTH(bp) == zio->io_txg || BP_IS_HOLE(bp)); ASSERT(zio->io_bp_override == NULL); if (!BP_IS_HOLE(bp)) { metaslab_free(zio->io_spa, bp, BP_GET_LOGICAL_BIRTH(bp), B_TRUE); } if (gn != NULL) { for (int g = 0; g < SPA_GBH_NBLKPTRS; g++) { zio_dva_unallocate(zio, gn->gn_child[g], &gn->gn_gbh->zg_blkptr[g]); } } } /* * Try to allocate an intent log block. Return 0 on success, errno on failure. */ int zio_alloc_zil(spa_t *spa, objset_t *os, uint64_t txg, blkptr_t *new_bp, uint64_t size, boolean_t *slog) { int error = 1; zio_alloc_list_t io_alloc_list; ASSERT(txg > spa_syncing_txg(spa)); metaslab_trace_init(&io_alloc_list); /* * Block pointer fields are useful to metaslabs for stats and debugging. * Fill in the obvious ones before calling into metaslab_alloc(). */ BP_SET_TYPE(new_bp, DMU_OT_INTENT_LOG); BP_SET_PSIZE(new_bp, size); BP_SET_LEVEL(new_bp, 0); /* * When allocating a zil block, we don't have information about * the final destination of the block except the objset it's part * of, so we just hash the objset ID to pick the allocator to get * some parallelism. */ int flags = METASLAB_ZIL; int allocator = (uint_t)cityhash4(0, 0, 0, os->os_dsl_dataset->ds_object) % spa->spa_alloc_count; error = metaslab_alloc(spa, spa_log_class(spa), size, new_bp, 1, txg, NULL, flags, &io_alloc_list, NULL, allocator); *slog = (error == 0); if (error != 0) { error = metaslab_alloc(spa, spa_embedded_log_class(spa), size, new_bp, 1, txg, NULL, flags, &io_alloc_list, NULL, allocator); } if (error != 0) { error = metaslab_alloc(spa, spa_normal_class(spa), size, new_bp, 1, txg, NULL, flags, &io_alloc_list, NULL, allocator); } metaslab_trace_fini(&io_alloc_list); if (error == 0) { BP_SET_LSIZE(new_bp, size); BP_SET_PSIZE(new_bp, size); BP_SET_COMPRESS(new_bp, ZIO_COMPRESS_OFF); BP_SET_CHECKSUM(new_bp, spa_version(spa) >= SPA_VERSION_SLIM_ZIL ? ZIO_CHECKSUM_ZILOG2 : ZIO_CHECKSUM_ZILOG); BP_SET_TYPE(new_bp, DMU_OT_INTENT_LOG); BP_SET_LEVEL(new_bp, 0); BP_SET_DEDUP(new_bp, 0); BP_SET_BYTEORDER(new_bp, ZFS_HOST_BYTEORDER); /* * encrypted blocks will require an IV and salt. We generate * these now since we will not be rewriting the bp at * rewrite time. */ if (os->os_encrypted) { uint8_t iv[ZIO_DATA_IV_LEN]; uint8_t salt[ZIO_DATA_SALT_LEN]; BP_SET_CRYPT(new_bp, B_TRUE); VERIFY0(spa_crypt_get_salt(spa, dmu_objset_id(os), salt)); VERIFY0(zio_crypt_generate_iv(iv)); zio_crypt_encode_params_bp(new_bp, salt, iv); } } else { zfs_dbgmsg("%s: zil block allocation failure: " "size %llu, error %d", spa_name(spa), (u_longlong_t)size, error); } return (error); } /* * ========================================================================== * Read and write to physical devices * ========================================================================== */ /* * Issue an I/O to the underlying vdev. Typically the issue pipeline * stops after this stage and will resume upon I/O completion. * However, there are instances where the vdev layer may need to * continue the pipeline when an I/O was not issued. Since the I/O * that was sent to the vdev layer might be different than the one * currently active in the pipeline (see vdev_queue_io()), we explicitly * force the underlying vdev layers to call either zio_execute() or * zio_interrupt() to ensure that the pipeline continues with the correct I/O. */ static zio_t * zio_vdev_io_start(zio_t *zio) { vdev_t *vd = zio->io_vd; uint64_t align; spa_t *spa = zio->io_spa; zio->io_delay = 0; ASSERT(zio->io_error == 0); ASSERT(zio->io_child_error[ZIO_CHILD_VDEV] == 0); if (vd == NULL) { if (!(zio->io_flags & ZIO_FLAG_CONFIG_WRITER)) spa_config_enter(spa, SCL_ZIO, zio, RW_READER); /* * The mirror_ops handle multiple DVAs in a single BP. */ vdev_mirror_ops.vdev_op_io_start(zio); return (NULL); } ASSERT3P(zio->io_logical, !=, zio); if (zio->io_type == ZIO_TYPE_WRITE) { ASSERT(spa->spa_trust_config); /* * Note: the code can handle other kinds of writes, * but we don't expect them. */ if (zio->io_vd->vdev_noalloc) { ASSERT(zio->io_flags & (ZIO_FLAG_PHYSICAL | ZIO_FLAG_SELF_HEAL | ZIO_FLAG_RESILVER | ZIO_FLAG_INDUCE_DAMAGE)); } } align = 1ULL << vd->vdev_top->vdev_ashift; if (!(zio->io_flags & ZIO_FLAG_PHYSICAL) && P2PHASE(zio->io_size, align) != 0) { /* Transform logical writes to be a full physical block size. */ uint64_t asize = P2ROUNDUP(zio->io_size, align); abd_t *abuf = abd_alloc_sametype(zio->io_abd, asize); ASSERT(vd == vd->vdev_top); if (zio->io_type == ZIO_TYPE_WRITE) { abd_copy(abuf, zio->io_abd, zio->io_size); abd_zero_off(abuf, zio->io_size, asize - zio->io_size); } zio_push_transform(zio, abuf, asize, asize, zio_subblock); } /* * If this is not a physical io, make sure that it is properly aligned * before proceeding. */ if (!(zio->io_flags & ZIO_FLAG_PHYSICAL)) { ASSERT0(P2PHASE(zio->io_offset, align)); ASSERT0(P2PHASE(zio->io_size, align)); } else { /* * For physical writes, we allow 512b aligned writes and assume * the device will perform a read-modify-write as necessary. */ ASSERT0(P2PHASE(zio->io_offset, SPA_MINBLOCKSIZE)); ASSERT0(P2PHASE(zio->io_size, SPA_MINBLOCKSIZE)); } VERIFY(zio->io_type != ZIO_TYPE_WRITE || spa_writeable(spa)); /* * If this is a repair I/O, and there's no self-healing involved -- * that is, we're just resilvering what we expect to resilver -- * then don't do the I/O unless zio's txg is actually in vd's DTL. * This prevents spurious resilvering. * * There are a few ways that we can end up creating these spurious * resilver i/os: * * 1. A resilver i/o will be issued if any DVA in the BP has a * dirty DTL. The mirror code will issue resilver writes to * each DVA, including the one(s) that are not on vdevs with dirty * DTLs. * * 2. With nested replication, which happens when we have a * "replacing" or "spare" vdev that's a child of a mirror or raidz. * For example, given mirror(replacing(A+B), C), it's likely that * only A is out of date (it's the new device). In this case, we'll * read from C, then use the data to resilver A+B -- but we don't * actually want to resilver B, just A. The top-level mirror has no * way to know this, so instead we just discard unnecessary repairs * as we work our way down the vdev tree. * * 3. ZTEST also creates mirrors of mirrors, mirrors of raidz, etc. * The same logic applies to any form of nested replication: ditto * + mirror, RAID-Z + replacing, etc. * * However, indirect vdevs point off to other vdevs which may have * DTL's, so we never bypass them. The child i/os on concrete vdevs * will be properly bypassed instead. * * Leaf DTL_PARTIAL can be empty when a legitimate write comes from * a dRAID spare vdev. For example, when a dRAID spare is first * used, its spare blocks need to be written to but the leaf vdev's * of such blocks can have empty DTL_PARTIAL. * * There seemed no clean way to allow such writes while bypassing * spurious ones. At this point, just avoid all bypassing for dRAID * for correctness. */ if ((zio->io_flags & ZIO_FLAG_IO_REPAIR) && !(zio->io_flags & ZIO_FLAG_SELF_HEAL) && zio->io_txg != 0 && /* not a delegated i/o */ vd->vdev_ops != &vdev_indirect_ops && vd->vdev_top->vdev_ops != &vdev_draid_ops && !vdev_dtl_contains(vd, DTL_PARTIAL, zio->io_txg, 1)) { ASSERT(zio->io_type == ZIO_TYPE_WRITE); zio_vdev_io_bypass(zio); return (zio); } /* * Select the next best leaf I/O to process. Distributed spares are * excluded since they dispatch the I/O directly to a leaf vdev after * applying the dRAID mapping. */ if (vd->vdev_ops->vdev_op_leaf && vd->vdev_ops != &vdev_draid_spare_ops && (zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE || zio->io_type == ZIO_TYPE_TRIM)) { if (zio_handle_device_injection(vd, zio, ENOSYS) != 0) { /* * "no-op" injections return success, but do no actual * work. Just skip the remaining vdev stages. */ zio_vdev_io_bypass(zio); zio_interrupt(zio); return (NULL); } if ((zio = vdev_queue_io(zio)) == NULL) return (NULL); if (!vdev_accessible(vd, zio)) { zio->io_error = SET_ERROR(ENXIO); zio_interrupt(zio); return (NULL); } zio->io_delay = gethrtime(); } vd->vdev_ops->vdev_op_io_start(zio); return (NULL); } static zio_t * zio_vdev_io_done(zio_t *zio) { vdev_t *vd = zio->io_vd; vdev_ops_t *ops = vd ? vd->vdev_ops : &vdev_mirror_ops; boolean_t unexpected_error = B_FALSE; if (zio_wait_for_children(zio, ZIO_CHILD_VDEV_BIT, ZIO_WAIT_DONE)) { return (NULL); } ASSERT(zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE || zio->io_type == ZIO_TYPE_FLUSH || zio->io_type == ZIO_TYPE_TRIM); if (zio->io_delay) zio->io_delay = gethrtime() - zio->io_delay; if (vd != NULL && vd->vdev_ops->vdev_op_leaf && vd->vdev_ops != &vdev_draid_spare_ops) { if (zio->io_type != ZIO_TYPE_FLUSH) vdev_queue_io_done(zio); if (zio_injection_enabled && zio->io_error == 0) zio->io_error = zio_handle_device_injections(vd, zio, EIO, EILSEQ); if (zio_injection_enabled && zio->io_error == 0) zio->io_error = zio_handle_label_injection(zio, EIO); if (zio->io_error && zio->io_type != ZIO_TYPE_FLUSH && zio->io_type != ZIO_TYPE_TRIM) { if (!vdev_accessible(vd, zio)) { zio->io_error = SET_ERROR(ENXIO); } else { unexpected_error = B_TRUE; } } } ops->vdev_op_io_done(zio); if (unexpected_error && vd->vdev_remove_wanted == B_FALSE) VERIFY(vdev_probe(vd, zio) == NULL); return (zio); } /* * This function is used to change the priority of an existing zio that is * currently in-flight. This is used by the arc to upgrade priority in the * event that a demand read is made for a block that is currently queued * as a scrub or async read IO. Otherwise, the high priority read request * would end up having to wait for the lower priority IO. */ void zio_change_priority(zio_t *pio, zio_priority_t priority) { zio_t *cio, *cio_next; zio_link_t *zl = NULL; ASSERT3U(priority, <, ZIO_PRIORITY_NUM_QUEUEABLE); if (pio->io_vd != NULL && pio->io_vd->vdev_ops->vdev_op_leaf) { vdev_queue_change_io_priority(pio, priority); } else { pio->io_priority = priority; } mutex_enter(&pio->io_lock); for (cio = zio_walk_children(pio, &zl); cio != NULL; cio = cio_next) { cio_next = zio_walk_children(pio, &zl); zio_change_priority(cio, priority); } mutex_exit(&pio->io_lock); } /* * For non-raidz ZIOs, we can just copy aside the bad data read from the * disk, and use that to finish the checksum ereport later. */ static void zio_vsd_default_cksum_finish(zio_cksum_report_t *zcr, const abd_t *good_buf) { /* no processing needed */ zfs_ereport_finish_checksum(zcr, good_buf, zcr->zcr_cbdata, B_FALSE); } void zio_vsd_default_cksum_report(zio_t *zio, zio_cksum_report_t *zcr) { void *abd = abd_alloc_sametype(zio->io_abd, zio->io_size); abd_copy(abd, zio->io_abd, zio->io_size); zcr->zcr_cbinfo = zio->io_size; zcr->zcr_cbdata = abd; zcr->zcr_finish = zio_vsd_default_cksum_finish; zcr->zcr_free = zio_abd_free; } static zio_t * zio_vdev_io_assess(zio_t *zio) { vdev_t *vd = zio->io_vd; if (zio_wait_for_children(zio, ZIO_CHILD_VDEV_BIT, ZIO_WAIT_DONE)) { return (NULL); } if (vd == NULL && !(zio->io_flags & ZIO_FLAG_CONFIG_WRITER)) spa_config_exit(zio->io_spa, SCL_ZIO, zio); if (zio->io_vsd != NULL) { zio->io_vsd_ops->vsd_free(zio); zio->io_vsd = NULL; } if (zio_injection_enabled && zio->io_error == 0) zio->io_error = zio_handle_fault_injection(zio, EIO); /* * If the I/O failed, determine whether we should attempt to retry it. * * On retry, we cut in line in the issue queue, since we don't want * compression/checksumming/etc. work to prevent our (cheap) IO reissue. */ if (zio->io_error && vd == NULL && !(zio->io_flags & (ZIO_FLAG_DONT_RETRY | ZIO_FLAG_IO_RETRY))) { ASSERT(!(zio->io_flags & ZIO_FLAG_DONT_QUEUE)); /* not a leaf */ ASSERT(!(zio->io_flags & ZIO_FLAG_IO_BYPASS)); /* not a leaf */ zio->io_error = 0; zio->io_flags |= ZIO_FLAG_IO_RETRY | ZIO_FLAG_DONT_AGGREGATE; zio->io_stage = ZIO_STAGE_VDEV_IO_START >> 1; zio_taskq_dispatch(zio, ZIO_TASKQ_ISSUE, zio_requeue_io_start_cut_in_line); return (NULL); } /* * If we got an error on a leaf device, convert it to ENXIO * if the device is not accessible at all. */ if (zio->io_error && vd != NULL && vd->vdev_ops->vdev_op_leaf && !vdev_accessible(vd, zio)) zio->io_error = SET_ERROR(ENXIO); /* * If we can't write to an interior vdev (mirror or RAID-Z), * set vdev_cant_write so that we stop trying to allocate from it. */ if (zio->io_error == ENXIO && zio->io_type == ZIO_TYPE_WRITE && vd != NULL && !vd->vdev_ops->vdev_op_leaf) { vdev_dbgmsg(vd, "zio_vdev_io_assess(zio=%px) setting " "cant_write=TRUE due to write failure with ENXIO", zio); vd->vdev_cant_write = B_TRUE; } /* * If a cache flush returns ENOTSUP or ENOTTY, we know that no future * attempts will ever succeed. In this case we set a persistent * boolean flag so that we don't bother with it in the future. */ if ((zio->io_error == ENOTSUP || zio->io_error == ENOTTY) && zio->io_type == ZIO_TYPE_FLUSH && vd != NULL) vd->vdev_nowritecache = B_TRUE; if (zio->io_error) zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; return (zio); } void zio_vdev_io_reissue(zio_t *zio) { ASSERT(zio->io_stage == ZIO_STAGE_VDEV_IO_START); ASSERT(zio->io_error == 0); zio->io_stage >>= 1; } void zio_vdev_io_redone(zio_t *zio) { ASSERT(zio->io_stage == ZIO_STAGE_VDEV_IO_DONE); zio->io_stage >>= 1; } void zio_vdev_io_bypass(zio_t *zio) { ASSERT(zio->io_stage == ZIO_STAGE_VDEV_IO_START); ASSERT(zio->io_error == 0); zio->io_flags |= ZIO_FLAG_IO_BYPASS; zio->io_stage = ZIO_STAGE_VDEV_IO_ASSESS >> 1; } /* * ========================================================================== * Encrypt and store encryption parameters * ========================================================================== */ /* * This function is used for ZIO_STAGE_ENCRYPT. It is responsible for * managing the storage of encryption parameters and passing them to the * lower-level encryption functions. */ static zio_t * zio_encrypt(zio_t *zio) { zio_prop_t *zp = &zio->io_prop; spa_t *spa = zio->io_spa; blkptr_t *bp = zio->io_bp; uint64_t psize = BP_GET_PSIZE(bp); uint64_t dsobj = zio->io_bookmark.zb_objset; dmu_object_type_t ot = BP_GET_TYPE(bp); void *enc_buf = NULL; abd_t *eabd = NULL; uint8_t salt[ZIO_DATA_SALT_LEN]; uint8_t iv[ZIO_DATA_IV_LEN]; uint8_t mac[ZIO_DATA_MAC_LEN]; boolean_t no_crypt = B_FALSE; /* the root zio already encrypted the data */ if (zio->io_child_type == ZIO_CHILD_GANG) return (zio); /* only ZIL blocks are re-encrypted on rewrite */ if (!IO_IS_ALLOCATING(zio) && ot != DMU_OT_INTENT_LOG) return (zio); if (!(zp->zp_encrypt || BP_IS_ENCRYPTED(bp))) { BP_SET_CRYPT(bp, B_FALSE); return (zio); } /* if we are doing raw encryption set the provided encryption params */ if (zio->io_flags & ZIO_FLAG_RAW_ENCRYPT) { ASSERT0(BP_GET_LEVEL(bp)); BP_SET_CRYPT(bp, B_TRUE); BP_SET_BYTEORDER(bp, zp->zp_byteorder); if (ot != DMU_OT_OBJSET) zio_crypt_encode_mac_bp(bp, zp->zp_mac); /* dnode blocks must be written out in the provided byteorder */ if (zp->zp_byteorder != ZFS_HOST_BYTEORDER && ot == DMU_OT_DNODE) { void *bswap_buf = zio_buf_alloc(psize); abd_t *babd = abd_get_from_buf(bswap_buf, psize); ASSERT3U(BP_GET_COMPRESS(bp), ==, ZIO_COMPRESS_OFF); abd_copy_to_buf(bswap_buf, zio->io_abd, psize); dmu_ot_byteswap[DMU_OT_BYTESWAP(ot)].ob_func(bswap_buf, psize); abd_take_ownership_of_buf(babd, B_TRUE); zio_push_transform(zio, babd, psize, psize, NULL); } if (DMU_OT_IS_ENCRYPTED(ot)) zio_crypt_encode_params_bp(bp, zp->zp_salt, zp->zp_iv); return (zio); } /* indirect blocks only maintain a cksum of the lower level MACs */ if (BP_GET_LEVEL(bp) > 0) { BP_SET_CRYPT(bp, B_TRUE); VERIFY0(zio_crypt_do_indirect_mac_checksum_abd(B_TRUE, zio->io_orig_abd, BP_GET_LSIZE(bp), BP_SHOULD_BYTESWAP(bp), mac)); zio_crypt_encode_mac_bp(bp, mac); return (zio); } /* * Objset blocks are a special case since they have 2 256-bit MACs * embedded within them. */ if (ot == DMU_OT_OBJSET) { ASSERT0(DMU_OT_IS_ENCRYPTED(ot)); ASSERT3U(BP_GET_COMPRESS(bp), ==, ZIO_COMPRESS_OFF); BP_SET_CRYPT(bp, B_TRUE); VERIFY0(spa_do_crypt_objset_mac_abd(B_TRUE, spa, dsobj, zio->io_abd, psize, BP_SHOULD_BYTESWAP(bp))); return (zio); } /* unencrypted object types are only authenticated with a MAC */ if (!DMU_OT_IS_ENCRYPTED(ot)) { BP_SET_CRYPT(bp, B_TRUE); VERIFY0(spa_do_crypt_mac_abd(B_TRUE, spa, dsobj, zio->io_abd, psize, mac)); zio_crypt_encode_mac_bp(bp, mac); return (zio); } /* * Later passes of sync-to-convergence may decide to rewrite data * in place to avoid more disk reallocations. This presents a problem * for encryption because this constitutes rewriting the new data with * the same encryption key and IV. However, this only applies to blocks * in the MOS (particularly the spacemaps) and we do not encrypt the * MOS. We assert that the zio is allocating or an intent log write * to enforce this. */ ASSERT(IO_IS_ALLOCATING(zio) || ot == DMU_OT_INTENT_LOG); ASSERT(BP_GET_LEVEL(bp) == 0 || ot == DMU_OT_INTENT_LOG); ASSERT(spa_feature_is_active(spa, SPA_FEATURE_ENCRYPTION)); ASSERT3U(psize, !=, 0); enc_buf = zio_buf_alloc(psize); eabd = abd_get_from_buf(enc_buf, psize); abd_take_ownership_of_buf(eabd, B_TRUE); /* * For an explanation of what encryption parameters are stored * where, see the block comment in zio_crypt.c. */ if (ot == DMU_OT_INTENT_LOG) { zio_crypt_decode_params_bp(bp, salt, iv); } else { BP_SET_CRYPT(bp, B_TRUE); } /* Perform the encryption. This should not fail */ VERIFY0(spa_do_crypt_abd(B_TRUE, spa, &zio->io_bookmark, BP_GET_TYPE(bp), BP_GET_DEDUP(bp), BP_SHOULD_BYTESWAP(bp), salt, iv, mac, psize, zio->io_abd, eabd, &no_crypt)); /* encode encryption metadata into the bp */ if (ot == DMU_OT_INTENT_LOG) { /* * ZIL blocks store the MAC in the embedded checksum, so the * transform must always be applied. */ zio_crypt_encode_mac_zil(enc_buf, mac); zio_push_transform(zio, eabd, psize, psize, NULL); } else { BP_SET_CRYPT(bp, B_TRUE); zio_crypt_encode_params_bp(bp, salt, iv); zio_crypt_encode_mac_bp(bp, mac); if (no_crypt) { ASSERT3U(ot, ==, DMU_OT_DNODE); abd_free(eabd); } else { zio_push_transform(zio, eabd, psize, psize, NULL); } } return (zio); } /* * ========================================================================== * Generate and verify checksums * ========================================================================== */ static zio_t * zio_checksum_generate(zio_t *zio) { blkptr_t *bp = zio->io_bp; enum zio_checksum checksum; if (bp == NULL) { /* * This is zio_write_phys(). * We're either generating a label checksum, or none at all. */ checksum = zio->io_prop.zp_checksum; if (checksum == ZIO_CHECKSUM_OFF) return (zio); ASSERT(checksum == ZIO_CHECKSUM_LABEL); } else { if (BP_IS_GANG(bp) && zio->io_child_type == ZIO_CHILD_GANG) { ASSERT(!IO_IS_ALLOCATING(zio)); checksum = ZIO_CHECKSUM_GANG_HEADER; } else { checksum = BP_GET_CHECKSUM(bp); } } zio_checksum_compute(zio, checksum, zio->io_abd, zio->io_size); return (zio); } static zio_t * zio_checksum_verify(zio_t *zio) { zio_bad_cksum_t info; blkptr_t *bp = zio->io_bp; int error; ASSERT(zio->io_vd != NULL); if (bp == NULL) { /* * This is zio_read_phys(). * We're either verifying a label checksum, or nothing at all. */ if (zio->io_prop.zp_checksum == ZIO_CHECKSUM_OFF) return (zio); ASSERT3U(zio->io_prop.zp_checksum, ==, ZIO_CHECKSUM_LABEL); } if ((error = zio_checksum_error(zio, &info)) != 0) { zio->io_error = error; if (error == ECKSUM && !(zio->io_flags & ZIO_FLAG_SPECULATIVE)) { mutex_enter(&zio->io_vd->vdev_stat_lock); zio->io_vd->vdev_stat.vs_checksum_errors++; mutex_exit(&zio->io_vd->vdev_stat_lock); (void) zfs_ereport_start_checksum(zio->io_spa, zio->io_vd, &zio->io_bookmark, zio, zio->io_offset, zio->io_size, &info); } } return (zio); } /* * Called by RAID-Z to ensure we don't compute the checksum twice. */ void zio_checksum_verified(zio_t *zio) { zio->io_pipeline &= ~ZIO_STAGE_CHECKSUM_VERIFY; } /* * ========================================================================== * Error rank. Error are ranked in the order 0, ENXIO, ECKSUM, EIO, other. * An error of 0 indicates success. ENXIO indicates whole-device failure, * which may be transient (e.g. unplugged) or permanent. ECKSUM and EIO * indicate errors that are specific to one I/O, and most likely permanent. * Any other error is presumed to be worse because we weren't expecting it. * ========================================================================== */ int zio_worst_error(int e1, int e2) { static int zio_error_rank[] = { 0, ENXIO, ECKSUM, EIO }; int r1, r2; for (r1 = 0; r1 < sizeof (zio_error_rank) / sizeof (int); r1++) if (e1 == zio_error_rank[r1]) break; for (r2 = 0; r2 < sizeof (zio_error_rank) / sizeof (int); r2++) if (e2 == zio_error_rank[r2]) break; return (r1 > r2 ? e1 : e2); } /* * ========================================================================== * I/O completion * ========================================================================== */ static zio_t * zio_ready(zio_t *zio) { blkptr_t *bp = zio->io_bp; zio_t *pio, *pio_next; zio_link_t *zl = NULL; if (zio_wait_for_children(zio, ZIO_CHILD_LOGICAL_BIT | ZIO_CHILD_GANG_BIT | ZIO_CHILD_DDT_BIT, ZIO_WAIT_READY)) { return (NULL); } if (zio->io_ready) { ASSERT(IO_IS_ALLOCATING(zio)); ASSERT(BP_GET_LOGICAL_BIRTH(bp) == zio->io_txg || BP_IS_HOLE(bp) || (zio->io_flags & ZIO_FLAG_NOPWRITE)); ASSERT(zio->io_children[ZIO_CHILD_GANG][ZIO_WAIT_READY] == 0); zio->io_ready(zio); } #ifdef ZFS_DEBUG if (bp != NULL && bp != &zio->io_bp_copy) zio->io_bp_copy = *bp; #endif if (zio->io_error != 0) { zio->io_pipeline = ZIO_INTERLOCK_PIPELINE; if (zio->io_flags & ZIO_FLAG_IO_ALLOCATING) { ASSERT(IO_IS_ALLOCATING(zio)); ASSERT(zio->io_priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(zio->io_metaslab_class != NULL); ASSERT(ZIO_HAS_ALLOCATOR(zio)); /* * We were unable to allocate anything, unreserve and * issue the next I/O to allocate. */ metaslab_class_throttle_unreserve( zio->io_metaslab_class, zio->io_prop.zp_copies, zio->io_allocator, zio); zio_allocate_dispatch(zio->io_spa, zio->io_allocator); } } mutex_enter(&zio->io_lock); zio->io_state[ZIO_WAIT_READY] = 1; pio = zio_walk_parents(zio, &zl); mutex_exit(&zio->io_lock); /* * As we notify zio's parents, new parents could be added. * New parents go to the head of zio's io_parent_list, however, * so we will (correctly) not notify them. The remainder of zio's * io_parent_list, from 'pio_next' onward, cannot change because * all parents must wait for us to be done before they can be done. */ for (; pio != NULL; pio = pio_next) { pio_next = zio_walk_parents(zio, &zl); zio_notify_parent(pio, zio, ZIO_WAIT_READY, NULL); } if (zio->io_flags & ZIO_FLAG_NODATA) { if (bp != NULL && BP_IS_GANG(bp)) { zio->io_flags &= ~ZIO_FLAG_NODATA; } else { ASSERT((uintptr_t)zio->io_abd < SPA_MAXBLOCKSIZE); zio->io_pipeline &= ~ZIO_VDEV_IO_STAGES; } } if (zio_injection_enabled && zio->io_spa->spa_syncing_txg == zio->io_txg) zio_handle_ignored_writes(zio); return (zio); } /* * Update the allocation throttle accounting. */ static void zio_dva_throttle_done(zio_t *zio) { zio_t *lio __maybe_unused = zio->io_logical; zio_t *pio = zio_unique_parent(zio); vdev_t *vd = zio->io_vd; int flags = METASLAB_ASYNC_ALLOC; ASSERT3P(zio->io_bp, !=, NULL); ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE); ASSERT3U(zio->io_priority, ==, ZIO_PRIORITY_ASYNC_WRITE); ASSERT3U(zio->io_child_type, ==, ZIO_CHILD_VDEV); ASSERT(vd != NULL); ASSERT3P(vd, ==, vd->vdev_top); ASSERT(zio_injection_enabled || !(zio->io_flags & ZIO_FLAG_IO_RETRY)); ASSERT(!(zio->io_flags & ZIO_FLAG_IO_REPAIR)); ASSERT(zio->io_flags & ZIO_FLAG_IO_ALLOCATING); ASSERT(!(lio->io_flags & ZIO_FLAG_IO_REWRITE)); ASSERT(!(lio->io_orig_flags & ZIO_FLAG_NODATA)); /* * Parents of gang children can have two flavors -- ones that * allocated the gang header (will have ZIO_FLAG_IO_REWRITE set) * and ones that allocated the constituent blocks. The allocation * throttle needs to know the allocating parent zio so we must find * it here. */ if (pio->io_child_type == ZIO_CHILD_GANG) { /* * If our parent is a rewrite gang child then our grandparent * would have been the one that performed the allocation. */ if (pio->io_flags & ZIO_FLAG_IO_REWRITE) pio = zio_unique_parent(pio); flags |= METASLAB_GANG_CHILD; } ASSERT(IO_IS_ALLOCATING(pio)); ASSERT(ZIO_HAS_ALLOCATOR(pio)); ASSERT3P(zio, !=, zio->io_logical); ASSERT(zio->io_logical != NULL); ASSERT(!(zio->io_flags & ZIO_FLAG_IO_REPAIR)); ASSERT0(zio->io_flags & ZIO_FLAG_NOPWRITE); ASSERT(zio->io_metaslab_class != NULL); mutex_enter(&pio->io_lock); metaslab_group_alloc_decrement(zio->io_spa, vd->vdev_id, pio, flags, pio->io_allocator, B_TRUE); mutex_exit(&pio->io_lock); metaslab_class_throttle_unreserve(zio->io_metaslab_class, 1, pio->io_allocator, pio); /* * Call into the pipeline to see if there is more work that * needs to be done. If there is work to be done it will be * dispatched to another taskq thread. */ zio_allocate_dispatch(zio->io_spa, pio->io_allocator); } static zio_t * zio_done(zio_t *zio) { /* * Always attempt to keep stack usage minimal here since * we can be called recursively up to 19 levels deep. */ const uint64_t psize = zio->io_size; zio_t *pio, *pio_next; zio_link_t *zl = NULL; /* * If our children haven't all completed, * wait for them and then repeat this pipeline stage. */ if (zio_wait_for_children(zio, ZIO_CHILD_ALL_BITS, ZIO_WAIT_DONE)) { return (NULL); } /* * If the allocation throttle is enabled, then update the accounting. * We only track child I/Os that are part of an allocating async * write. We must do this since the allocation is performed * by the logical I/O but the actual write is done by child I/Os. */ if (zio->io_flags & ZIO_FLAG_IO_ALLOCATING && zio->io_child_type == ZIO_CHILD_VDEV) { ASSERT(zio->io_metaslab_class != NULL); ASSERT(zio->io_metaslab_class->mc_alloc_throttle_enabled); zio_dva_throttle_done(zio); } /* * If the allocation throttle is enabled, verify that * we have decremented the refcounts for every I/O that was throttled. */ if (zio->io_flags & ZIO_FLAG_IO_ALLOCATING) { ASSERT(zio->io_type == ZIO_TYPE_WRITE); ASSERT(zio->io_priority == ZIO_PRIORITY_ASYNC_WRITE); ASSERT(zio->io_bp != NULL); ASSERT(ZIO_HAS_ALLOCATOR(zio)); metaslab_group_alloc_verify(zio->io_spa, zio->io_bp, zio, zio->io_allocator); VERIFY(zfs_refcount_not_held(&zio->io_metaslab_class-> mc_allocator[zio->io_allocator].mca_alloc_slots, zio)); } for (int c = 0; c < ZIO_CHILD_TYPES; c++) for (int w = 0; w < ZIO_WAIT_TYPES; w++) ASSERT(zio->io_children[c][w] == 0); if (zio->io_bp != NULL && !BP_IS_EMBEDDED(zio->io_bp)) { ASSERT(zio->io_bp->blk_pad[0] == 0); ASSERT(zio->io_bp->blk_pad[1] == 0); ASSERT(memcmp(zio->io_bp, &zio->io_bp_copy, sizeof (blkptr_t)) == 0 || (zio->io_bp == zio_unique_parent(zio)->io_bp)); if (zio->io_type == ZIO_TYPE_WRITE && !BP_IS_HOLE(zio->io_bp) && zio->io_bp_override == NULL && !(zio->io_flags & ZIO_FLAG_IO_REPAIR)) { ASSERT3U(zio->io_prop.zp_copies, <=, BP_GET_NDVAS(zio->io_bp)); ASSERT(BP_COUNT_GANG(zio->io_bp) == 0 || (BP_COUNT_GANG(zio->io_bp) == BP_GET_NDVAS(zio->io_bp))); } if (zio->io_flags & ZIO_FLAG_NOPWRITE) VERIFY(BP_EQUAL(zio->io_bp, &zio->io_bp_orig)); } /* * If there were child vdev/gang/ddt errors, they apply to us now. */ zio_inherit_child_errors(zio, ZIO_CHILD_VDEV); zio_inherit_child_errors(zio, ZIO_CHILD_GANG); zio_inherit_child_errors(zio, ZIO_CHILD_DDT); /* * If the I/O on the transformed data was successful, generate any * checksum reports now while we still have the transformed data. */ if (zio->io_error == 0) { while (zio->io_cksum_report != NULL) { zio_cksum_report_t *zcr = zio->io_cksum_report; uint64_t align = zcr->zcr_align; uint64_t asize = P2ROUNDUP(psize, align); abd_t *adata = zio->io_abd; if (adata != NULL && asize != psize) { adata = abd_alloc(asize, B_TRUE); abd_copy(adata, zio->io_abd, psize); abd_zero_off(adata, psize, asize - psize); } zio->io_cksum_report = zcr->zcr_next; zcr->zcr_next = NULL; zcr->zcr_finish(zcr, adata); zfs_ereport_free_checksum(zcr); if (adata != NULL && asize != psize) abd_free(adata); } } zio_pop_transforms(zio); /* note: may set zio->io_error */ vdev_stat_update(zio, psize); /* * If this I/O is attached to a particular vdev is slow, exceeding * 30 seconds to complete, post an error described the I/O delay. * We ignore these errors if the device is currently unavailable. */ if (zio->io_delay >= MSEC2NSEC(zio_slow_io_ms)) { if (zio->io_vd != NULL && !vdev_is_dead(zio->io_vd)) { /* * We want to only increment our slow IO counters if * the IO is valid (i.e. not if the drive is removed). * * zfs_ereport_post() will also do these checks, but * it can also ratelimit and have other failures, so we * need to increment the slow_io counters independent * of it. */ if (zfs_ereport_is_valid(FM_EREPORT_ZFS_DELAY, zio->io_spa, zio->io_vd, zio)) { mutex_enter(&zio->io_vd->vdev_stat_lock); zio->io_vd->vdev_stat.vs_slow_ios++; mutex_exit(&zio->io_vd->vdev_stat_lock); (void) zfs_ereport_post(FM_EREPORT_ZFS_DELAY, zio->io_spa, zio->io_vd, &zio->io_bookmark, zio, 0); } } } if (zio->io_error) { /* * If this I/O is attached to a particular vdev, * generate an error message describing the I/O failure * at the block level. We ignore these errors if the * device is currently unavailable. */ if (zio->io_error != ECKSUM && zio->io_vd != NULL && !vdev_is_dead(zio->io_vd)) { int ret = zfs_ereport_post(FM_EREPORT_ZFS_IO, zio->io_spa, zio->io_vd, &zio->io_bookmark, zio, 0); if (ret != EALREADY) { mutex_enter(&zio->io_vd->vdev_stat_lock); if (zio->io_type == ZIO_TYPE_READ) zio->io_vd->vdev_stat.vs_read_errors++; else if (zio->io_type == ZIO_TYPE_WRITE) zio->io_vd->vdev_stat.vs_write_errors++; mutex_exit(&zio->io_vd->vdev_stat_lock); } } if ((zio->io_error == EIO || !(zio->io_flags & (ZIO_FLAG_SPECULATIVE | ZIO_FLAG_DONT_PROPAGATE))) && zio == zio->io_logical) { /* * For logical I/O requests, tell the SPA to log the * error and generate a logical data ereport. */ spa_log_error(zio->io_spa, &zio->io_bookmark, BP_GET_LOGICAL_BIRTH(zio->io_bp)); (void) zfs_ereport_post(FM_EREPORT_ZFS_DATA, zio->io_spa, NULL, &zio->io_bookmark, zio, 0); } } if (zio->io_error && zio == zio->io_logical) { /* * Determine whether zio should be reexecuted. This will * propagate all the way to the root via zio_notify_parent(). */ ASSERT(zio->io_vd == NULL && zio->io_bp != NULL); ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); if (IO_IS_ALLOCATING(zio) && !(zio->io_flags & ZIO_FLAG_CANFAIL)) { if (zio->io_error != ENOSPC) zio->io_reexecute |= ZIO_REEXECUTE_NOW; else zio->io_reexecute |= ZIO_REEXECUTE_SUSPEND; } if ((zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_FREE) && !(zio->io_flags & ZIO_FLAG_SCAN_THREAD) && zio->io_error == ENXIO && spa_load_state(zio->io_spa) == SPA_LOAD_NONE && spa_get_failmode(zio->io_spa) != ZIO_FAILURE_MODE_CONTINUE) zio->io_reexecute |= ZIO_REEXECUTE_SUSPEND; if (!(zio->io_flags & ZIO_FLAG_CANFAIL) && !zio->io_reexecute) zio->io_reexecute |= ZIO_REEXECUTE_SUSPEND; /* * Here is a possibly good place to attempt to do * either combinatorial reconstruction or error correction * based on checksums. It also might be a good place * to send out preliminary ereports before we suspend * processing. */ } /* * If there were logical child errors, they apply to us now. * We defer this until now to avoid conflating logical child * errors with errors that happened to the zio itself when * updating vdev stats and reporting FMA events above. */ zio_inherit_child_errors(zio, ZIO_CHILD_LOGICAL); if ((zio->io_error || zio->io_reexecute) && IO_IS_ALLOCATING(zio) && zio->io_gang_leader == zio && !(zio->io_flags & (ZIO_FLAG_IO_REWRITE | ZIO_FLAG_NOPWRITE))) zio_dva_unallocate(zio, zio->io_gang_tree, zio->io_bp); zio_gang_tree_free(&zio->io_gang_tree); /* * Godfather I/Os should never suspend. */ if ((zio->io_flags & ZIO_FLAG_GODFATHER) && (zio->io_reexecute & ZIO_REEXECUTE_SUSPEND)) zio->io_reexecute &= ~ZIO_REEXECUTE_SUSPEND; if (zio->io_reexecute) { /* * This is a logical I/O that wants to reexecute. * * Reexecute is top-down. When an i/o fails, if it's not * the root, it simply notifies its parent and sticks around. * The parent, seeing that it still has children in zio_done(), * does the same. This percolates all the way up to the root. * The root i/o will reexecute or suspend the entire tree. * * This approach ensures that zio_reexecute() honors * all the original i/o dependency relationships, e.g. * parents not executing until children are ready. */ ASSERT(zio->io_child_type == ZIO_CHILD_LOGICAL); zio->io_gang_leader = NULL; mutex_enter(&zio->io_lock); zio->io_state[ZIO_WAIT_DONE] = 1; mutex_exit(&zio->io_lock); /* * "The Godfather" I/O monitors its children but is * not a true parent to them. It will track them through * the pipeline but severs its ties whenever they get into * trouble (e.g. suspended). This allows "The Godfather" * I/O to return status without blocking. */ zl = NULL; for (pio = zio_walk_parents(zio, &zl); pio != NULL; pio = pio_next) { zio_link_t *remove_zl = zl; pio_next = zio_walk_parents(zio, &zl); if ((pio->io_flags & ZIO_FLAG_GODFATHER) && (zio->io_reexecute & ZIO_REEXECUTE_SUSPEND)) { zio_remove_child(pio, zio, remove_zl); /* * This is a rare code path, so we don't * bother with "next_to_execute". */ zio_notify_parent(pio, zio, ZIO_WAIT_DONE, NULL); } } if ((pio = zio_unique_parent(zio)) != NULL) { /* * We're not a root i/o, so there's nothing to do * but notify our parent. Don't propagate errors * upward since we haven't permanently failed yet. */ ASSERT(!(zio->io_flags & ZIO_FLAG_GODFATHER)); zio->io_flags |= ZIO_FLAG_DONT_PROPAGATE; /* * This is a rare code path, so we don't bother with * "next_to_execute". */ zio_notify_parent(pio, zio, ZIO_WAIT_DONE, NULL); } else if (zio->io_reexecute & ZIO_REEXECUTE_SUSPEND) { /* * We'd fail again if we reexecuted now, so suspend * until conditions improve (e.g. device comes online). */ zio_suspend(zio->io_spa, zio, ZIO_SUSPEND_IOERR); } else { /* * Reexecution is potentially a huge amount of work. * Hand it off to the otherwise-unused claim taskq. */ spa_taskq_dispatch(zio->io_spa, ZIO_TYPE_CLAIM, ZIO_TASKQ_ISSUE, zio_reexecute, zio, B_FALSE); } return (NULL); } ASSERT(list_is_empty(&zio->io_child_list)); ASSERT(zio->io_reexecute == 0); ASSERT(zio->io_error == 0 || (zio->io_flags & ZIO_FLAG_CANFAIL)); /* * Report any checksum errors, since the I/O is complete. */ while (zio->io_cksum_report != NULL) { zio_cksum_report_t *zcr = zio->io_cksum_report; zio->io_cksum_report = zcr->zcr_next; zcr->zcr_next = NULL; zcr->zcr_finish(zcr, NULL); zfs_ereport_free_checksum(zcr); } /* * It is the responsibility of the done callback to ensure that this * particular zio is no longer discoverable for adoption, and as * such, cannot acquire any new parents. */ if (zio->io_done) zio->io_done(zio); mutex_enter(&zio->io_lock); zio->io_state[ZIO_WAIT_DONE] = 1; mutex_exit(&zio->io_lock); /* * We are done executing this zio. We may want to execute a parent * next. See the comment in zio_notify_parent(). */ zio_t *next_to_execute = NULL; zl = NULL; for (pio = zio_walk_parents(zio, &zl); pio != NULL; pio = pio_next) { zio_link_t *remove_zl = zl; pio_next = zio_walk_parents(zio, &zl); zio_remove_child(pio, zio, remove_zl); zio_notify_parent(pio, zio, ZIO_WAIT_DONE, &next_to_execute); } if (zio->io_waiter != NULL) { mutex_enter(&zio->io_lock); zio->io_executor = NULL; cv_broadcast(&zio->io_cv); mutex_exit(&zio->io_lock); } else { zio_destroy(zio); } return (next_to_execute); } /* * ========================================================================== * I/O pipeline definition * ========================================================================== */ static zio_pipe_stage_t *zio_pipeline[] = { NULL, zio_read_bp_init, zio_write_bp_init, zio_free_bp_init, zio_issue_async, zio_write_compress, zio_encrypt, zio_checksum_generate, zio_nop_write, zio_brt_free, zio_ddt_read_start, zio_ddt_read_done, zio_ddt_write, zio_ddt_free, zio_gang_assemble, zio_gang_issue, zio_dva_throttle, zio_dva_allocate, zio_dva_free, zio_dva_claim, zio_ready, zio_vdev_io_start, zio_vdev_io_done, zio_vdev_io_assess, zio_checksum_verify, zio_done }; /* * Compare two zbookmark_phys_t's to see which we would reach first in a * pre-order traversal of the object tree. * * This is simple in every case aside from the meta-dnode object. For all other * objects, we traverse them in order (object 1 before object 2, and so on). * However, all of these objects are traversed while traversing object 0, since * the data it points to is the list of objects. Thus, we need to convert to a * canonical representation so we can compare meta-dnode bookmarks to * non-meta-dnode bookmarks. * * We do this by calculating "equivalents" for each field of the zbookmark. * zbookmarks outside of the meta-dnode use their own object and level, and * calculate the level 0 equivalent (the first L0 blkid that is contained in the * blocks this bookmark refers to) by multiplying their blkid by their span * (the number of L0 blocks contained within one block at their level). * zbookmarks inside the meta-dnode calculate their object equivalent * (which is L0equiv * dnodes per data block), use 0 for their L0equiv, and use * level + 1<<31 (any value larger than a level could ever be) for their level. * This causes them to always compare before a bookmark in their object * equivalent, compare appropriately to bookmarks in other objects, and to * compare appropriately to other bookmarks in the meta-dnode. */ int zbookmark_compare(uint16_t dbss1, uint8_t ibs1, uint16_t dbss2, uint8_t ibs2, const zbookmark_phys_t *zb1, const zbookmark_phys_t *zb2) { /* * These variables represent the "equivalent" values for the zbookmark, * after converting zbookmarks inside the meta dnode to their * normal-object equivalents. */ uint64_t zb1obj, zb2obj; uint64_t zb1L0, zb2L0; uint64_t zb1level, zb2level; if (zb1->zb_object == zb2->zb_object && zb1->zb_level == zb2->zb_level && zb1->zb_blkid == zb2->zb_blkid) return (0); IMPLY(zb1->zb_level > 0, ibs1 >= SPA_MINBLOCKSHIFT); IMPLY(zb2->zb_level > 0, ibs2 >= SPA_MINBLOCKSHIFT); /* * BP_SPANB calculates the span in blocks. */ zb1L0 = (zb1->zb_blkid) * BP_SPANB(ibs1, zb1->zb_level); zb2L0 = (zb2->zb_blkid) * BP_SPANB(ibs2, zb2->zb_level); if (zb1->zb_object == DMU_META_DNODE_OBJECT) { zb1obj = zb1L0 * (dbss1 << (SPA_MINBLOCKSHIFT - DNODE_SHIFT)); zb1L0 = 0; zb1level = zb1->zb_level + COMPARE_META_LEVEL; } else { zb1obj = zb1->zb_object; zb1level = zb1->zb_level; } if (zb2->zb_object == DMU_META_DNODE_OBJECT) { zb2obj = zb2L0 * (dbss2 << (SPA_MINBLOCKSHIFT - DNODE_SHIFT)); zb2L0 = 0; zb2level = zb2->zb_level + COMPARE_META_LEVEL; } else { zb2obj = zb2->zb_object; zb2level = zb2->zb_level; } /* Now that we have a canonical representation, do the comparison. */ if (zb1obj != zb2obj) return (zb1obj < zb2obj ? -1 : 1); else if (zb1L0 != zb2L0) return (zb1L0 < zb2L0 ? -1 : 1); else if (zb1level != zb2level) return (zb1level > zb2level ? -1 : 1); /* * This can (theoretically) happen if the bookmarks have the same object * and level, but different blkids, if the block sizes are not the same. * There is presently no way to change the indirect block sizes */ return (0); } /* * This function checks the following: given that last_block is the place that * our traversal stopped last time, does that guarantee that we've visited * every node under subtree_root? Therefore, we can't just use the raw output * of zbookmark_compare. We have to pass in a modified version of * subtree_root; by incrementing the block id, and then checking whether * last_block is before or equal to that, we can tell whether or not having * visited last_block implies that all of subtree_root's children have been * visited. */ boolean_t zbookmark_subtree_completed(const dnode_phys_t *dnp, const zbookmark_phys_t *subtree_root, const zbookmark_phys_t *last_block) { zbookmark_phys_t mod_zb = *subtree_root; mod_zb.zb_blkid++; ASSERT0(last_block->zb_level); /* The objset_phys_t isn't before anything. */ if (dnp == NULL) return (B_FALSE); /* * We pass in 1ULL << (DNODE_BLOCK_SHIFT - SPA_MINBLOCKSHIFT) for the * data block size in sectors, because that variable is only used if * the bookmark refers to a block in the meta-dnode. Since we don't * know without examining it what object it refers to, and there's no * harm in passing in this value in other cases, we always pass it in. * * We pass in 0 for the indirect block size shift because zb2 must be * level 0. The indirect block size is only used to calculate the span * of the bookmark, but since the bookmark must be level 0, the span is * always 1, so the math works out. * * If you make changes to how the zbookmark_compare code works, be sure * to make sure that this code still works afterwards. */ return (zbookmark_compare(dnp->dn_datablkszsec, dnp->dn_indblkshift, 1ULL << (DNODE_BLOCK_SHIFT - SPA_MINBLOCKSHIFT), 0, &mod_zb, last_block) <= 0); } /* * This function is similar to zbookmark_subtree_completed(), but returns true * if subtree_root is equal or ahead of last_block, i.e. still to be done. */ boolean_t zbookmark_subtree_tbd(const dnode_phys_t *dnp, const zbookmark_phys_t *subtree_root, const zbookmark_phys_t *last_block) { ASSERT0(last_block->zb_level); if (dnp == NULL) return (B_FALSE); return (zbookmark_compare(dnp->dn_datablkszsec, dnp->dn_indblkshift, 1ULL << (DNODE_BLOCK_SHIFT - SPA_MINBLOCKSHIFT), 0, subtree_root, last_block) >= 0); } EXPORT_SYMBOL(zio_type_name); EXPORT_SYMBOL(zio_buf_alloc); EXPORT_SYMBOL(zio_data_buf_alloc); EXPORT_SYMBOL(zio_buf_free); EXPORT_SYMBOL(zio_data_buf_free); ZFS_MODULE_PARAM(zfs_zio, zio_, slow_io_ms, INT, ZMOD_RW, "Max I/O completion time (milliseconds) before marking it as slow"); ZFS_MODULE_PARAM(zfs_zio, zio_, requeue_io_start_cut_in_line, INT, ZMOD_RW, "Prioritize requeued I/O"); ZFS_MODULE_PARAM(zfs, zfs_, sync_pass_deferred_free, UINT, ZMOD_RW, "Defer frees starting in this pass"); ZFS_MODULE_PARAM(zfs, zfs_, sync_pass_dont_compress, UINT, ZMOD_RW, "Don't compress starting in this pass"); ZFS_MODULE_PARAM(zfs, zfs_, sync_pass_rewrite, UINT, ZMOD_RW, "Rewrite new bps starting in this pass"); ZFS_MODULE_PARAM(zfs_zio, zio_, dva_throttle_enabled, INT, ZMOD_RW, "Throttle block allocations in the ZIO pipeline"); ZFS_MODULE_PARAM(zfs_zio, zio_, deadman_log_all, INT, ZMOD_RW, "Log all slow ZIOs, not just those with vdevs"); diff --git a/tests/runfiles/common.run b/tests/runfiles/common.run index ac2c541a9188..d48b243eefed 100644 --- a/tests/runfiles/common.run +++ b/tests/runfiles/common.run @@ -1,1041 +1,1047 @@ # # This file and its contents are supplied under the terms of the # Common Development and Distribution License ("CDDL"), version 1.0. # You may only use this file in accordance with the terms of version # 1.0 of the CDDL. # # A full copy of the text of the CDDL should have accompanied this # source. A copy of the CDDL is also available via the Internet at # http://www.illumos.org/license/CDDL. # # This run file contains all of the common functional tests. When # adding a new test consider also adding it to the sanity.run file # if the new test runs to completion in only a few seconds. # # Approximate run time: 4-5 hours # [DEFAULT] pre = setup quiet = False pre_user = root user = root timeout = 600 post_user = root post = cleanup failsafe_user = root failsafe = callbacks/zfs_failsafe outputdir = /var/tmp/test_results tags = ['functional'] [tests/functional/acl/off] tests = ['dosmode', 'posixmode'] tags = ['functional', 'acl'] [tests/functional/alloc_class] tests = ['alloc_class_001_pos', 'alloc_class_002_neg', 'alloc_class_003_pos', 'alloc_class_004_pos', 'alloc_class_005_pos', 'alloc_class_006_pos', 'alloc_class_007_pos', 'alloc_class_008_pos', 'alloc_class_009_pos', 'alloc_class_010_pos', 'alloc_class_011_neg', 'alloc_class_012_pos', 'alloc_class_013_pos', 'alloc_class_014_neg', 'alloc_class_015_pos'] tags = ['functional', 'alloc_class'] [tests/functional/append] tests = ['file_append', 'threadsappend_001_pos'] tags = ['functional', 'append'] [tests/functional/arc] tests = ['dbufstats_001_pos', 'dbufstats_002_pos', 'dbufstats_003_pos', 'arcstats_runtime_tuning'] tags = ['functional', 'arc'] [tests/functional/atime] tests = ['atime_001_pos', 'atime_002_neg', 'root_atime_off', 'root_atime_on'] tags = ['functional', 'atime'] [tests/functional/bclone] tests = ['bclone_crossfs_corner_cases_limited', 'bclone_crossfs_data', 'bclone_crossfs_embedded', 'bclone_crossfs_hole', 'bclone_diffprops_all', 'bclone_diffprops_checksum', 'bclone_diffprops_compress', 'bclone_diffprops_copies', 'bclone_diffprops_recordsize', 'bclone_prop_sync', 'bclone_samefs_corner_cases_limited', 'bclone_samefs_data', 'bclone_samefs_embedded', 'bclone_samefs_hole'] tags = ['functional', 'bclone'] timeout = 7200 [tests/functional/block_cloning] tests = ['block_cloning_clone_mmap_cached', 'block_cloning_copyfilerange', 'block_cloning_copyfilerange_partial', 'block_cloning_copyfilerange_fallback', 'block_cloning_disabled_copyfilerange', 'block_cloning_copyfilerange_cross_dataset', 'block_cloning_cross_enc_dataset', 'block_cloning_copyfilerange_fallback_same_txg', 'block_cloning_replay', 'block_cloning_replay_encrypted', 'block_cloning_lwb_buffer_overflow', 'block_cloning_clone_mmap_write'] tags = ['functional', 'block_cloning'] [tests/functional/bootfs] tests = ['bootfs_001_pos', 'bootfs_002_neg', 'bootfs_003_pos', 'bootfs_004_neg', 'bootfs_005_neg', 'bootfs_006_pos', 'bootfs_007_pos', 'bootfs_008_pos'] tags = ['functional', 'bootfs'] [tests/functional/btree] tests = ['btree_positive', 'btree_negative'] tags = ['functional', 'btree'] pre = post = [tests/functional/cache] tests = ['cache_001_pos', 'cache_002_pos', 'cache_003_pos', 'cache_004_neg', 'cache_005_neg', 'cache_006_pos', 'cache_007_neg', 'cache_008_neg', 'cache_009_pos', 'cache_010_pos', 'cache_011_pos', 'cache_012_pos'] tags = ['functional', 'cache'] [tests/functional/cachefile] tests = ['cachefile_001_pos', 'cachefile_002_pos', 'cachefile_003_pos', 'cachefile_004_pos'] tags = ['functional', 'cachefile'] [tests/functional/casenorm] tests = ['case_all_values', 'norm_all_values', 'mixed_create_failure', 'sensitive_none_lookup', 'sensitive_none_delete', 'sensitive_formd_lookup', 'sensitive_formd_delete', 'insensitive_none_lookup', 'insensitive_none_delete', 'insensitive_formd_lookup', 'insensitive_formd_delete', 'mixed_none_lookup', 'mixed_none_lookup_ci', 'mixed_none_delete', 'mixed_formd_lookup', 'mixed_formd_lookup_ci', 'mixed_formd_delete'] tags = ['functional', 'casenorm'] [tests/functional/channel_program/lua_core] tests = ['tst.args_to_lua', 'tst.divide_by_zero', 'tst.exists', 'tst.integer_illegal', 'tst.integer_overflow', 'tst.language_functions_neg', 'tst.language_functions_pos', 'tst.large_prog', 'tst.libraries', 'tst.memory_limit', 'tst.nested_neg', 'tst.nested_pos', 'tst.nvlist_to_lua', 'tst.recursive_neg', 'tst.recursive_pos', 'tst.return_large', 'tst.return_nvlist_neg', 'tst.return_nvlist_pos', 'tst.return_recursive_table', 'tst.stack_gsub', 'tst.timeout'] tags = ['functional', 'channel_program', 'lua_core'] [tests/functional/channel_program/synctask_core] tests = ['tst.destroy_fs', 'tst.destroy_snap', 'tst.get_count_and_limit', 'tst.get_index_props', 'tst.get_mountpoint', 'tst.get_neg', 'tst.get_number_props', 'tst.get_string_props', 'tst.get_type', 'tst.get_userquota', 'tst.get_written', 'tst.inherit', 'tst.list_bookmarks', 'tst.list_children', 'tst.list_clones', 'tst.list_holds', 'tst.list_snapshots', 'tst.list_system_props', 'tst.list_user_props', 'tst.parse_args_neg','tst.promote_conflict', 'tst.promote_multiple', 'tst.promote_simple', 'tst.rollback_mult', 'tst.rollback_one', 'tst.set_props', 'tst.snapshot_destroy', 'tst.snapshot_neg', 'tst.snapshot_recursive', 'tst.snapshot_rename', 'tst.snapshot_simple', 'tst.bookmark.create', 'tst.bookmark.copy', 'tst.terminate_by_signal' ] tags = ['functional', 'channel_program', 'synctask_core'] [tests/functional/checksum] tests = ['run_edonr_test', 'run_sha2_test', 'run_skein_test', 'run_blake3_test', 'filetest_001_pos', 'filetest_002_pos'] tags = ['functional', 'checksum'] [tests/functional/clean_mirror] tests = [ 'clean_mirror_001_pos', 'clean_mirror_002_pos', 'clean_mirror_003_pos', 'clean_mirror_004_pos'] tags = ['functional', 'clean_mirror'] [tests/functional/cli_root/zinject] tests = ['zinject_args'] pre = post = tags = ['functional', 'cli_root', 'zinject'] [tests/functional/cli_root/zdb] tests = ['zdb_002_pos', 'zdb_003_pos', 'zdb_004_pos', 'zdb_005_pos', 'zdb_006_pos', 'zdb_args_neg', 'zdb_args_pos', 'zdb_block_size_histogram', 'zdb_checksum', 'zdb_decompress', 'zdb_display_block', 'zdb_encrypted', 'zdb_label_checksum', 'zdb_object_range_neg', 'zdb_object_range_pos', 'zdb_objset_id', 'zdb_decompress_zstd', 'zdb_recover', 'zdb_recover_2', 'zdb_backup'] pre = post = tags = ['functional', 'cli_root', 'zdb'] timeout = 1200 [tests/functional/cli_root/zfs] tests = ['zfs_001_neg', 'zfs_002_pos'] tags = ['functional', 'cli_root', 'zfs'] [tests/functional/cli_root/zfs_bookmark] tests = ['zfs_bookmark_cliargs'] tags = ['functional', 'cli_root', 'zfs_bookmark'] [tests/functional/cli_root/zfs_change-key] tests = ['zfs_change-key', 'zfs_change-key_child', 'zfs_change-key_format', 'zfs_change-key_inherit', 'zfs_change-key_load', 'zfs_change-key_location', 'zfs_change-key_pbkdf2iters', 'zfs_change-key_clones'] tags = ['functional', 'cli_root', 'zfs_change-key'] [tests/functional/cli_root/zfs_clone] tests = ['zfs_clone_001_neg', 'zfs_clone_002_pos', 'zfs_clone_003_pos', 'zfs_clone_004_pos', 'zfs_clone_005_pos', 'zfs_clone_006_pos', 'zfs_clone_007_pos', 'zfs_clone_008_neg', 'zfs_clone_009_neg', 'zfs_clone_010_pos', 'zfs_clone_encrypted', 'zfs_clone_deeply_nested', 'zfs_clone_rm_nested'] tags = ['functional', 'cli_root', 'zfs_clone'] [tests/functional/cli_root/zfs_copies] tests = ['zfs_copies_001_pos', 'zfs_copies_002_pos', 'zfs_copies_003_pos', 'zfs_copies_004_neg', 'zfs_copies_005_neg', 'zfs_copies_006_pos'] tags = ['functional', 'cli_root', 'zfs_copies'] [tests/functional/cli_root/zfs_create] tests = ['zfs_create_001_pos', 'zfs_create_002_pos', 'zfs_create_003_pos', 'zfs_create_004_pos', 'zfs_create_005_pos', 'zfs_create_006_pos', 'zfs_create_007_pos', 'zfs_create_008_neg', 'zfs_create_009_neg', 'zfs_create_010_neg', 'zfs_create_011_pos', 'zfs_create_012_pos', 'zfs_create_013_pos', 'zfs_create_014_pos', 'zfs_create_encrypted', 'zfs_create_crypt_combos', 'zfs_create_dryrun', 'zfs_create_nomount', 'zfs_create_verbose'] tags = ['functional', 'cli_root', 'zfs_create'] [tests/functional/cli_root/zfs_destroy] tests = ['zfs_clone_livelist_condense_and_disable', 'zfs_clone_livelist_condense_races', 'zfs_clone_livelist_dedup', 'zfs_destroy_001_pos', 'zfs_destroy_002_pos', 'zfs_destroy_003_pos', 'zfs_destroy_004_pos', 'zfs_destroy_005_neg', 'zfs_destroy_006_neg', 'zfs_destroy_007_neg', 'zfs_destroy_008_pos', 'zfs_destroy_009_pos', 'zfs_destroy_010_pos', 'zfs_destroy_011_pos', 'zfs_destroy_012_pos', 'zfs_destroy_013_neg', 'zfs_destroy_014_pos', 'zfs_destroy_015_pos', 'zfs_destroy_016_pos', 'zfs_destroy_clone_livelist', 'zfs_destroy_dev_removal', 'zfs_destroy_dev_removal_condense'] tags = ['functional', 'cli_root', 'zfs_destroy'] [tests/functional/cli_root/zfs_diff] tests = ['zfs_diff_changes', 'zfs_diff_cliargs', 'zfs_diff_timestamp', 'zfs_diff_types', 'zfs_diff_encrypted', 'zfs_diff_mangle'] tags = ['functional', 'cli_root', 'zfs_diff'] [tests/functional/cli_root/zfs_get] tests = ['zfs_get_001_pos', 'zfs_get_002_pos', 'zfs_get_003_pos', 'zfs_get_004_pos', 'zfs_get_005_neg', 'zfs_get_006_neg', 'zfs_get_007_neg', 'zfs_get_008_pos', 'zfs_get_009_pos', 'zfs_get_010_neg'] tags = ['functional', 'cli_root', 'zfs_get'] [tests/functional/cli_root/zfs_ids_to_path] tests = ['zfs_ids_to_path_001_pos'] tags = ['functional', 'cli_root', 'zfs_ids_to_path'] [tests/functional/cli_root/zfs_inherit] tests = ['zfs_inherit_001_neg', 'zfs_inherit_002_neg', 'zfs_inherit_003_pos', 'zfs_inherit_mountpoint'] tags = ['functional', 'cli_root', 'zfs_inherit'] [tests/functional/cli_root/zfs_load-key] tests = ['zfs_load-key', 'zfs_load-key_all', 'zfs_load-key_file', 'zfs_load-key_https', 'zfs_load-key_location', 'zfs_load-key_noop', 'zfs_load-key_recursive'] tags = ['functional', 'cli_root', 'zfs_load-key'] [tests/functional/cli_root/zfs_mount] tests = ['zfs_mount_001_pos', 'zfs_mount_002_pos', 'zfs_mount_003_pos', 'zfs_mount_004_pos', 'zfs_mount_005_pos', 'zfs_mount_007_pos', 'zfs_mount_009_neg', 'zfs_mount_010_neg', 'zfs_mount_011_neg', 'zfs_mount_012_pos', 'zfs_mount_all_001_pos', 'zfs_mount_encrypted', 'zfs_mount_remount', 'zfs_mount_all_fail', 'zfs_mount_all_mountpoints', 'zfs_mount_test_race', 'zfs_mount_recursive'] tags = ['functional', 'cli_root', 'zfs_mount'] [tests/functional/cli_root/zfs_program] tests = ['zfs_program_json'] tags = ['functional', 'cli_root', 'zfs_program'] [tests/functional/cli_root/zfs_promote] tests = ['zfs_promote_001_pos', 'zfs_promote_002_pos', 'zfs_promote_003_pos', 'zfs_promote_004_pos', 'zfs_promote_005_pos', 'zfs_promote_006_neg', 'zfs_promote_007_neg', 'zfs_promote_008_pos', 'zfs_promote_encryptionroot'] tags = ['functional', 'cli_root', 'zfs_promote'] [tests/functional/cli_root/zfs_property] tests = ['zfs_written_property_001_pos'] tags = ['functional', 'cli_root', 'zfs_property'] [tests/functional/cli_root/zfs_receive] tests = ['zfs_receive_001_pos', 'zfs_receive_002_pos', 'zfs_receive_003_pos', 'zfs_receive_004_neg', 'zfs_receive_005_neg', 'zfs_receive_006_pos', 'zfs_receive_007_neg', 'zfs_receive_008_pos', 'zfs_receive_009_neg', 'zfs_receive_010_pos', 'zfs_receive_011_pos', 'zfs_receive_012_pos', 'zfs_receive_013_pos', 'zfs_receive_014_pos', 'zfs_receive_015_pos', 'zfs_receive_016_pos', 'receive-o-x_props_override', 'receive-o-x_props_aliases', 'zfs_receive_from_encrypted', 'zfs_receive_to_encrypted', 'zfs_receive_raw', 'zfs_receive_raw_incremental', 'zfs_receive_-e', 'zfs_receive_raw_-d', 'zfs_receive_from_zstd', 'zfs_receive_new_props', 'zfs_receive_-wR-encrypted-mix', 'zfs_receive_corrective', 'zfs_receive_compressed_corrective', 'zfs_receive_large_block_corrective'] tags = ['functional', 'cli_root', 'zfs_receive'] [tests/functional/cli_root/zfs_rename] tests = ['zfs_rename_001_pos', 'zfs_rename_002_pos', 'zfs_rename_003_pos', 'zfs_rename_004_neg', 'zfs_rename_005_neg', 'zfs_rename_006_pos', 'zfs_rename_007_pos', 'zfs_rename_008_pos', 'zfs_rename_009_neg', 'zfs_rename_010_neg', 'zfs_rename_011_pos', 'zfs_rename_012_neg', 'zfs_rename_013_pos', 'zfs_rename_014_neg', 'zfs_rename_encrypted_child', 'zfs_rename_to_encrypted', 'zfs_rename_mountpoint', 'zfs_rename_nounmount'] tags = ['functional', 'cli_root', 'zfs_rename'] [tests/functional/cli_root/zfs_reservation] tests = ['zfs_reservation_001_pos', 'zfs_reservation_002_pos'] tags = ['functional', 'cli_root', 'zfs_reservation'] [tests/functional/cli_root/zfs_rollback] tests = ['zfs_rollback_001_pos', 'zfs_rollback_002_pos', 'zfs_rollback_003_neg', 'zfs_rollback_004_neg'] tags = ['functional', 'cli_root', 'zfs_rollback'] [tests/functional/cli_root/zfs_send] tests = ['zfs_send_001_pos', 'zfs_send_002_pos', 'zfs_send_003_pos', 'zfs_send_004_neg', 'zfs_send_005_pos', 'zfs_send_006_pos', 'zfs_send_007_pos', 'zfs_send_encrypted', 'zfs_send_encrypted_unloaded', 'zfs_send_raw', 'zfs_send_sparse', 'zfs_send-b', 'zfs_send_skip_missing'] tags = ['functional', 'cli_root', 'zfs_send'] [tests/functional/cli_root/zfs_set] tests = ['cache_001_pos', 'cache_002_neg', 'canmount_001_pos', 'canmount_002_pos', 'canmount_003_pos', 'canmount_004_pos', 'checksum_001_pos', 'compression_001_pos', 'mountpoint_001_pos', 'mountpoint_002_pos', 'reservation_001_neg', 'user_property_002_pos', 'share_mount_001_neg', 'snapdir_001_pos', 'onoffs_001_pos', 'user_property_001_pos', 'user_property_003_neg', 'readonly_001_pos', 'user_property_004_pos', 'version_001_neg', 'zfs_set_001_neg', 'zfs_set_002_neg', 'zfs_set_003_neg', 'property_alias_001_pos', 'mountpoint_003_pos', 'ro_props_001_pos', 'zfs_set_keylocation', 'zfs_set_feature_activation', 'zfs_set_nomount'] tags = ['functional', 'cli_root', 'zfs_set'] [tests/functional/cli_root/zfs_share] tests = ['zfs_share_001_pos', 'zfs_share_002_pos', 'zfs_share_003_pos', 'zfs_share_004_pos', 'zfs_share_006_pos', 'zfs_share_008_neg', 'zfs_share_010_neg', 'zfs_share_011_pos', 'zfs_share_concurrent_shares', 'zfs_share_after_mount'] tags = ['functional', 'cli_root', 'zfs_share'] [tests/functional/cli_root/zfs_snapshot] tests = ['zfs_snapshot_001_neg', 'zfs_snapshot_002_neg', 'zfs_snapshot_003_neg', 'zfs_snapshot_004_neg', 'zfs_snapshot_005_neg', 'zfs_snapshot_006_pos', 'zfs_snapshot_007_neg', 'zfs_snapshot_008_neg', 'zfs_snapshot_009_pos'] tags = ['functional', 'cli_root', 'zfs_snapshot'] [tests/functional/cli_root/zfs_unload-key] tests = ['zfs_unload-key', 'zfs_unload-key_all', 'zfs_unload-key_recursive'] tags = ['functional', 'cli_root', 'zfs_unload-key'] [tests/functional/cli_root/zfs_unmount] tests = ['zfs_unmount_001_pos', 'zfs_unmount_002_pos', 'zfs_unmount_003_pos', 'zfs_unmount_004_pos', 'zfs_unmount_005_pos', 'zfs_unmount_006_pos', 'zfs_unmount_007_neg', 'zfs_unmount_008_neg', 'zfs_unmount_009_pos', 'zfs_unmount_all_001_pos', 'zfs_unmount_nested', 'zfs_unmount_unload_keys'] tags = ['functional', 'cli_root', 'zfs_unmount'] [tests/functional/cli_root/zfs_unshare] tests = ['zfs_unshare_001_pos', 'zfs_unshare_002_pos', 'zfs_unshare_003_pos', 'zfs_unshare_004_neg', 'zfs_unshare_005_neg', 'zfs_unshare_006_pos', 'zfs_unshare_007_pos'] tags = ['functional', 'cli_root', 'zfs_unshare'] [tests/functional/cli_root/zfs_upgrade] tests = ['zfs_upgrade_001_pos', 'zfs_upgrade_002_pos', 'zfs_upgrade_003_pos', 'zfs_upgrade_004_pos', 'zfs_upgrade_005_pos', 'zfs_upgrade_006_neg', 'zfs_upgrade_007_neg'] tags = ['functional', 'cli_root', 'zfs_upgrade'] [tests/functional/cli_root/zfs_wait] tests = ['zfs_wait_deleteq', 'zfs_wait_getsubopt'] tags = ['functional', 'cli_root', 'zfs_wait'] [tests/functional/cli_root/zhack] tests = ['zhack_label_repair_001', 'zhack_label_repair_002', 'zhack_label_repair_003', 'zhack_label_repair_004'] pre = post = tags = ['functional', 'cli_root', 'zhack'] [tests/functional/cli_root/zpool] tests = ['zpool_001_neg', 'zpool_002_pos', 'zpool_003_pos', 'zpool_colors'] tags = ['functional', 'cli_root', 'zpool'] [tests/functional/cli_root/zpool_add] tests = ['zpool_add_001_pos', 'zpool_add_002_pos', 'zpool_add_003_pos', 'zpool_add_004_pos', 'zpool_add_006_pos', 'zpool_add_007_neg', 'zpool_add_008_neg', 'zpool_add_009_neg', 'zpool_add_010_pos', 'add-o_ashift', 'add_prop_ashift', 'zpool_add_dryrun_output', 'zpool_add--allow-ashift-mismatch'] tags = ['functional', 'cli_root', 'zpool_add'] [tests/functional/cli_root/zpool_attach] tests = ['zpool_attach_001_neg', 'attach-o_ashift'] tags = ['functional', 'cli_root', 'zpool_attach'] [tests/functional/cli_root/zpool_clear] tests = ['zpool_clear_001_pos', 'zpool_clear_002_neg', 'zpool_clear_003_neg', 'zpool_clear_readonly'] tags = ['functional', 'cli_root', 'zpool_clear'] [tests/functional/cli_root/zpool_create] tests = ['zpool_create_001_pos', 'zpool_create_002_pos', 'zpool_create_003_pos', 'zpool_create_004_pos', 'zpool_create_005_pos', 'zpool_create_006_pos', 'zpool_create_007_neg', 'zpool_create_008_pos', 'zpool_create_009_neg', 'zpool_create_010_neg', 'zpool_create_011_neg', 'zpool_create_012_neg', 'zpool_create_014_neg', 'zpool_create_015_neg', 'zpool_create_017_neg', 'zpool_create_018_pos', 'zpool_create_019_pos', 'zpool_create_020_pos', 'zpool_create_021_pos', 'zpool_create_022_pos', 'zpool_create_023_neg', 'zpool_create_024_pos', 'zpool_create_encrypted', 'zpool_create_crypt_combos', 'zpool_create_draid_001_pos', 'zpool_create_draid_002_pos', 'zpool_create_draid_003_pos', 'zpool_create_draid_004_pos', 'zpool_create_features_001_pos', 'zpool_create_features_002_pos', 'zpool_create_features_003_pos', 'zpool_create_features_004_neg', 'zpool_create_features_005_pos', 'zpool_create_features_006_pos', 'zpool_create_features_007_pos', 'zpool_create_features_008_pos', 'zpool_create_features_009_pos', 'create-o_ashift', 'zpool_create_tempname', 'zpool_create_dryrun_output'] tags = ['functional', 'cli_root', 'zpool_create'] [tests/functional/cli_root/zpool_destroy] tests = ['zpool_destroy_001_pos', 'zpool_destroy_002_pos', 'zpool_destroy_003_neg'] pre = post = tags = ['functional', 'cli_root', 'zpool_destroy'] [tests/functional/cli_root/zpool_detach] tests = ['zpool_detach_001_neg'] tags = ['functional', 'cli_root', 'zpool_detach'] [tests/functional/cli_root/zpool_events] tests = ['zpool_events_clear', 'zpool_events_cliargs', 'zpool_events_follow', 'zpool_events_poolname', 'zpool_events_errors', 'zpool_events_duplicates', 'zpool_events_clear_retained'] tags = ['functional', 'cli_root', 'zpool_events'] [tests/functional/cli_root/zpool_export] tests = ['zpool_export_001_pos', 'zpool_export_002_pos', 'zpool_export_003_neg', 'zpool_export_004_pos', 'zpool_export_parallel_pos', 'zpool_export_parallel_admin'] tags = ['functional', 'cli_root', 'zpool_export'] [tests/functional/cli_root/zpool_get] tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos', 'zpool_get_004_neg', 'zpool_get_005_pos', 'vdev_get_001_pos'] tags = ['functional', 'cli_root', 'zpool_get'] [tests/functional/cli_root/zpool_history] tests = ['zpool_history_001_neg', 'zpool_history_002_pos'] tags = ['functional', 'cli_root', 'zpool_history'] [tests/functional/cli_root/zpool_import] tests = ['zpool_import_001_pos', 'zpool_import_002_pos', 'zpool_import_003_pos', 'zpool_import_004_pos', 'zpool_import_005_pos', 'zpool_import_006_pos', 'zpool_import_007_pos', 'zpool_import_008_pos', 'zpool_import_009_neg', 'zpool_import_010_pos', 'zpool_import_011_neg', 'zpool_import_012_pos', 'zpool_import_013_neg', 'zpool_import_014_pos', 'zpool_import_015_pos', 'zpool_import_016_pos', 'zpool_import_017_pos', 'zpool_import_features_001_pos', 'zpool_import_features_002_neg', 'zpool_import_features_003_pos', 'zpool_import_missing_001_pos', 'zpool_import_missing_002_pos', 'zpool_import_missing_003_pos', 'zpool_import_rename_001_pos', 'zpool_import_all_001_pos', 'zpool_import_encrypted', 'zpool_import_encrypted_load', 'zpool_import_errata3', 'zpool_import_errata4', 'import_cachefile_device_added', 'import_cachefile_device_removed', 'import_cachefile_device_replaced', 'import_cachefile_mirror_attached', 'import_cachefile_mirror_detached', 'import_cachefile_paths_changed', 'import_cachefile_shared_device', 'import_devices_missing', 'import_log_missing', 'import_paths_changed', 'import_rewind_config_changed', 'import_rewind_device_replaced', 'zpool_import_status', 'zpool_import_parallel_pos', 'zpool_import_parallel_neg', 'zpool_import_parallel_admin'] tags = ['functional', 'cli_root', 'zpool_import'] timeout = 1200 [tests/functional/cli_root/zpool_labelclear] tests = ['zpool_labelclear_active', 'zpool_labelclear_exported', 'zpool_labelclear_removed', 'zpool_labelclear_valid'] pre = post = tags = ['functional', 'cli_root', 'zpool_labelclear'] [tests/functional/cli_root/zpool_initialize] tests = ['zpool_initialize_attach_detach_add_remove', 'zpool_initialize_fault_export_import_online', 'zpool_initialize_import_export', 'zpool_initialize_offline_export_import_online', 'zpool_initialize_online_offline', 'zpool_initialize_split', 'zpool_initialize_start_and_cancel_neg', 'zpool_initialize_start_and_cancel_pos', 'zpool_initialize_suspend_resume', 'zpool_initialize_uninit', 'zpool_initialize_unsupported_vdevs', 'zpool_initialize_verify_checksums', 'zpool_initialize_verify_initialized'] pre = tags = ['functional', 'cli_root', 'zpool_initialize'] [tests/functional/cli_root/zpool_offline] tests = ['zpool_offline_001_pos', 'zpool_offline_002_neg', 'zpool_offline_003_pos'] tags = ['functional', 'cli_root', 'zpool_offline'] [tests/functional/cli_root/zpool_online] tests = ['zpool_online_001_pos', 'zpool_online_002_neg'] tags = ['functional', 'cli_root', 'zpool_online'] [tests/functional/cli_root/zpool_remove] tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos', 'zpool_remove_003_pos'] tags = ['functional', 'cli_root', 'zpool_remove'] [tests/functional/cli_root/zpool_replace] tests = ['zpool_replace_001_neg', 'replace-o_ashift', 'replace_prop_ashift'] tags = ['functional', 'cli_root', 'zpool_replace'] [tests/functional/cli_root/zpool_resilver] tests = ['zpool_resilver_bad_args', 'zpool_resilver_restart', 'zpool_resilver_concurrent'] tags = ['functional', 'cli_root', 'zpool_resilver'] [tests/functional/cli_root/zpool_scrub] tests = ['zpool_scrub_001_neg', 'zpool_scrub_002_pos', 'zpool_scrub_003_pos', 'zpool_scrub_004_pos', 'zpool_scrub_005_pos', 'zpool_scrub_encrypted_unloaded', 'zpool_scrub_print_repairing', 'zpool_scrub_offline_device', 'zpool_scrub_multiple_copies', 'zpool_error_scrub_001_pos', 'zpool_error_scrub_002_pos', 'zpool_error_scrub_003_pos', 'zpool_error_scrub_004_pos'] tags = ['functional', 'cli_root', 'zpool_scrub'] [tests/functional/cli_root/zpool_set] tests = ['zpool_set_001_pos', 'zpool_set_002_neg', 'zpool_set_003_neg', 'zpool_set_ashift', 'zpool_set_features', 'vdev_set_001_pos', 'user_property_001_pos', 'user_property_002_neg'] tags = ['functional', 'cli_root', 'zpool_set'] [tests/functional/cli_root/zpool_split] tests = ['zpool_split_cliargs', 'zpool_split_devices', 'zpool_split_encryption', 'zpool_split_props', 'zpool_split_vdevs', 'zpool_split_resilver', 'zpool_split_indirect', 'zpool_split_dryrun_output'] tags = ['functional', 'cli_root', 'zpool_split'] [tests/functional/cli_root/zpool_status] tests = ['zpool_status_001_pos', 'zpool_status_002_pos', 'zpool_status_003_pos', 'zpool_status_004_pos', 'zpool_status_005_pos', 'zpool_status_006_pos', 'zpool_status_007_pos', 'zpool_status_008_pos', 'zpool_status_features_001_pos'] tags = ['functional', 'cli_root', 'zpool_status'] [tests/functional/cli_root/zpool_sync] tests = ['zpool_sync_001_pos', 'zpool_sync_002_neg'] tags = ['functional', 'cli_root', 'zpool_sync'] [tests/functional/cli_root/zpool_trim] tests = ['zpool_trim_attach_detach_add_remove', 'zpool_trim_fault_export_import_online', 'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg', 'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline', 'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg', 'zpool_trim_secure', 'zpool_trim_split', 'zpool_trim_start_and_cancel_neg', 'zpool_trim_start_and_cancel_pos', 'zpool_trim_suspend_resume', 'zpool_trim_unsupported_vdevs', 'zpool_trim_verify_checksums', 'zpool_trim_verify_trimmed'] tags = ['functional', 'zpool_trim'] [tests/functional/cli_root/zpool_upgrade] tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_002_pos', 'zpool_upgrade_003_pos', 'zpool_upgrade_004_pos', 'zpool_upgrade_005_neg', 'zpool_upgrade_006_neg', 'zpool_upgrade_007_pos', 'zpool_upgrade_008_pos', 'zpool_upgrade_009_neg', 'zpool_upgrade_features_001_pos'] tags = ['functional', 'cli_root', 'zpool_upgrade'] [tests/functional/cli_root/zpool_wait] tests = ['zpool_wait_discard', 'zpool_wait_freeing', 'zpool_wait_initialize_basic', 'zpool_wait_initialize_cancel', 'zpool_wait_initialize_flag', 'zpool_wait_multiple', 'zpool_wait_no_activity', 'zpool_wait_remove', 'zpool_wait_remove_cancel', 'zpool_wait_trim_basic', 'zpool_wait_trim_cancel', 'zpool_wait_trim_flag', 'zpool_wait_usage'] tags = ['functional', 'cli_root', 'zpool_wait'] [tests/functional/cli_root/zpool_wait/scan] tests = ['zpool_wait_replace_cancel', 'zpool_wait_rebuild', 'zpool_wait_resilver', 'zpool_wait_scrub_cancel', 'zpool_wait_replace', 'zpool_wait_scrub_basic', 'zpool_wait_scrub_flag'] tags = ['functional', 'cli_root', 'zpool_wait'] [tests/functional/cli_user/misc] tests = ['zdb_001_neg', 'zfs_001_neg', 'zfs_allow_001_neg', 'zfs_clone_001_neg', 'zfs_create_001_neg', 'zfs_destroy_001_neg', 'zfs_get_001_neg', 'zfs_inherit_001_neg', 'zfs_mount_001_neg', 'zfs_promote_001_neg', 'zfs_receive_001_neg', 'zfs_rename_001_neg', 'zfs_rollback_001_neg', 'zfs_send_001_neg', 'zfs_set_001_neg', 'zfs_share_001_neg', 'zfs_snapshot_001_neg', 'zfs_unallow_001_neg', 'zfs_unmount_001_neg', 'zfs_unshare_001_neg', 'zfs_upgrade_001_neg', 'zpool_001_neg', 'zpool_add_001_neg', 'zpool_attach_001_neg', 'zpool_clear_001_neg', 'zpool_create_001_neg', 'zpool_destroy_001_neg', 'zpool_detach_001_neg', 'zpool_export_001_neg', 'zpool_get_001_neg', 'zpool_history_001_neg', 'zpool_import_001_neg', 'zpool_import_002_neg', 'zpool_offline_001_neg', 'zpool_online_001_neg', 'zpool_remove_001_neg', 'zpool_replace_001_neg', 'zpool_scrub_001_neg', 'zpool_set_001_neg', 'zpool_status_001_neg', 'zpool_upgrade_001_neg', 'arcstat_001_pos', 'arc_summary_001_pos', 'arc_summary_002_neg', 'zpool_wait_privilege', 'zilstat_001_pos'] user = tags = ['functional', 'cli_user', 'misc'] [tests/functional/cli_user/zfs_list] tests = ['zfs_list_001_pos', 'zfs_list_002_pos', 'zfs_list_003_pos', 'zfs_list_004_neg', 'zfs_list_005_neg', 'zfs_list_007_pos', 'zfs_list_008_neg'] user = tags = ['functional', 'cli_user', 'zfs_list'] [tests/functional/cli_user/zpool_iostat] tests = ['zpool_iostat_001_neg', 'zpool_iostat_002_pos', 'zpool_iostat_003_neg', 'zpool_iostat_004_pos', 'zpool_iostat_005_pos', 'zpool_iostat_-c_disable', 'zpool_iostat_-c_homedir', 'zpool_iostat_-c_searchpath'] user = tags = ['functional', 'cli_user', 'zpool_iostat'] [tests/functional/cli_user/zpool_list] tests = ['zpool_list_001_pos', 'zpool_list_002_neg'] user = tags = ['functional', 'cli_user', 'zpool_list'] [tests/functional/cli_user/zpool_status] tests = ['zpool_status_003_pos', 'zpool_status_-c_disable', 'zpool_status_-c_homedir', 'zpool_status_-c_searchpath'] user = tags = ['functional', 'cli_user', 'zpool_status'] [tests/functional/compression] tests = ['compress_001_pos', 'compress_002_pos', 'compress_003_pos', 'l2arc_compressed_arc', 'l2arc_compressed_arc_disabled', 'l2arc_encrypted', 'l2arc_encrypted_no_compressed_arc'] tags = ['functional', 'compression'] [tests/functional/cp_files] tests = ['cp_files_001_pos', 'cp_files_002_pos', 'cp_stress'] tags = ['functional', 'cp_files'] [tests/functional/zap_shrink] tests = ['zap_shrink_001_pos'] tags = ['functional', 'zap_shrink'] [tests/functional/crtime] tests = ['crtime_001_pos' ] tags = ['functional', 'crtime'] [tests/functional/ctime] tests = ['ctime_001_pos' ] tags = ['functional', 'ctime'] [tests/functional/deadman] tests = ['deadman_ratelimit', 'deadman_sync', 'deadman_zio'] pre = post = tags = ['functional', 'deadman'] +[tests/functional/dedup] +tests = ['dedup_quota'] +pre = +post = +tags = ['functional', 'dedup'] + [tests/functional/delegate] tests = ['zfs_allow_001_pos', 'zfs_allow_002_pos', 'zfs_allow_003_pos', 'zfs_allow_004_pos', 'zfs_allow_005_pos', 'zfs_allow_006_pos', 'zfs_allow_007_pos', 'zfs_allow_008_pos', 'zfs_allow_009_neg', 'zfs_allow_010_pos', 'zfs_allow_011_neg', 'zfs_allow_012_neg', 'zfs_unallow_001_pos', 'zfs_unallow_002_pos', 'zfs_unallow_003_pos', 'zfs_unallow_004_pos', 'zfs_unallow_005_pos', 'zfs_unallow_006_pos', 'zfs_unallow_007_neg', 'zfs_unallow_008_neg'] tags = ['functional', 'delegate'] [tests/functional/exec] tests = ['exec_001_pos', 'exec_002_neg'] tags = ['functional', 'exec'] [tests/functional/fallocate] tests = ['fallocate_punch-hole'] tags = ['functional', 'fallocate'] [tests/functional/features/async_destroy] tests = ['async_destroy_001_pos'] tags = ['functional', 'features', 'async_destroy'] [tests/functional/features/large_dnode] tests = ['large_dnode_001_pos', 'large_dnode_003_pos', 'large_dnode_004_neg', 'large_dnode_005_pos', 'large_dnode_007_neg', 'large_dnode_009_pos'] tags = ['functional', 'features', 'large_dnode'] [tests/functional/grow] pre = post = tests = ['grow_pool_001_pos', 'grow_replicas_001_pos'] tags = ['functional', 'grow'] [tests/functional/history] tests = ['history_001_pos', 'history_002_pos', 'history_003_pos', 'history_004_pos', 'history_005_neg', 'history_006_neg', 'history_007_pos', 'history_008_pos', 'history_009_pos', 'history_010_pos'] tags = ['functional', 'history'] [tests/functional/hkdf] pre = post = tests = ['hkdf_test'] tags = ['functional', 'hkdf'] [tests/functional/inheritance] tests = ['inherit_001_pos'] pre = tags = ['functional', 'inheritance'] [tests/functional/io] tests = ['sync', 'psync', 'posixaio', 'mmap'] tags = ['functional', 'io'] [tests/functional/inuse] tests = ['inuse_004_pos', 'inuse_005_pos', 'inuse_008_pos', 'inuse_009_pos'] post = tags = ['functional', 'inuse'] [tests/functional/large_files] tests = ['large_files_001_pos', 'large_files_002_pos'] tags = ['functional', 'large_files'] [tests/functional/limits] tests = ['filesystem_count', 'filesystem_limit', 'snapshot_count', 'snapshot_limit'] tags = ['functional', 'limits'] [tests/functional/link_count] tests = ['link_count_001', 'link_count_root_inode'] tags = ['functional', 'link_count'] [tests/functional/migration] tests = ['migration_001_pos', 'migration_002_pos', 'migration_003_pos', 'migration_004_pos', 'migration_005_pos', 'migration_006_pos', 'migration_007_pos', 'migration_008_pos', 'migration_009_pos', 'migration_010_pos', 'migration_011_pos', 'migration_012_pos'] tags = ['functional', 'migration'] [tests/functional/mmap] tests = ['mmap_mixed', 'mmap_read_001_pos', 'mmap_seek_001_pos', 'mmap_sync_001_pos', 'mmap_write_001_pos'] tags = ['functional', 'mmap'] [tests/functional/mount] tests = ['umount_001', 'umountall_001'] tags = ['functional', 'mount'] [tests/functional/mv_files] tests = ['mv_files_001_pos', 'mv_files_002_pos', 'random_creation'] tags = ['functional', 'mv_files'] [tests/functional/nestedfs] tests = ['nestedfs_001_pos'] tags = ['functional', 'nestedfs'] [tests/functional/no_space] tests = ['enospc_001_pos', 'enospc_002_pos', 'enospc_003_pos', 'enospc_df', 'enospc_ganging', 'enospc_rm'] tags = ['functional', 'no_space'] [tests/functional/nopwrite] tests = ['nopwrite_copies', 'nopwrite_mtime', 'nopwrite_negative', 'nopwrite_promoted_clone', 'nopwrite_recsize', 'nopwrite_sync', 'nopwrite_varying_compression', 'nopwrite_volume'] tags = ['functional', 'nopwrite'] [tests/functional/online_offline] tests = ['online_offline_001_pos', 'online_offline_002_neg', 'online_offline_003_neg'] tags = ['functional', 'online_offline'] [tests/functional/pool_checkpoint] tests = ['checkpoint_after_rewind', 'checkpoint_big_rewind', 'checkpoint_capacity', 'checkpoint_conf_change', 'checkpoint_discard', 'checkpoint_discard_busy', 'checkpoint_discard_many', 'checkpoint_indirect', 'checkpoint_invalid', 'checkpoint_lun_expsz', 'checkpoint_open', 'checkpoint_removal', 'checkpoint_rewind', 'checkpoint_ro_rewind', 'checkpoint_sm_scale', 'checkpoint_twice', 'checkpoint_vdev_add', 'checkpoint_zdb', 'checkpoint_zhack_feat'] tags = ['functional', 'pool_checkpoint'] timeout = 1800 [tests/functional/pool_names] tests = ['pool_names_001_pos', 'pool_names_002_neg'] pre = post = tags = ['functional', 'pool_names'] [tests/functional/poolversion] tests = ['poolversion_001_pos', 'poolversion_002_pos'] tags = ['functional', 'poolversion'] [tests/functional/pyzfs] tests = ['pyzfs_unittest'] pre = post = tags = ['functional', 'pyzfs'] [tests/functional/quota] tests = ['quota_001_pos', 'quota_002_pos', 'quota_003_pos', 'quota_004_pos', 'quota_005_pos', 'quota_006_neg'] tags = ['functional', 'quota'] [tests/functional/redacted_send] tests = ['redacted_compressed', 'redacted_contents', 'redacted_deleted', 'redacted_disabled_feature', 'redacted_embedded', 'redacted_holes', 'redacted_incrementals', 'redacted_largeblocks', 'redacted_many_clones', 'redacted_mixed_recsize', 'redacted_mounts', 'redacted_negative', 'redacted_origin', 'redacted_panic', 'redacted_props', 'redacted_resume', 'redacted_size', 'redacted_volume'] tags = ['functional', 'redacted_send'] [tests/functional/raidz] tests = ['raidz_001_neg', 'raidz_002_pos', 'raidz_expand_001_pos', 'raidz_expand_002_pos', 'raidz_expand_003_neg', 'raidz_expand_003_pos', 'raidz_expand_004_pos', 'raidz_expand_005_pos', 'raidz_expand_006_neg', 'raidz_expand_007_neg'] tags = ['functional', 'raidz'] timeout = 1200 [tests/functional/redundancy] tests = ['redundancy_draid', 'redundancy_draid1', 'redundancy_draid2', 'redundancy_draid3', 'redundancy_draid_damaged1', 'redundancy_draid_damaged2', 'redundancy_draid_spare1', 'redundancy_draid_spare2', 'redundancy_draid_spare3', 'redundancy_mirror', 'redundancy_raidz', 'redundancy_raidz1', 'redundancy_raidz2', 'redundancy_raidz3', 'redundancy_stripe'] tags = ['functional', 'redundancy'] timeout = 1200 [tests/functional/refquota] tests = ['refquota_001_pos', 'refquota_002_pos', 'refquota_003_pos', 'refquota_004_pos', 'refquota_005_pos', 'refquota_006_neg', 'refquota_007_neg', 'refquota_008_neg'] tags = ['functional', 'refquota'] [tests/functional/refreserv] tests = ['refreserv_001_pos', 'refreserv_002_pos', 'refreserv_003_pos', 'refreserv_004_pos', 'refreserv_005_pos', 'refreserv_multi_raidz', 'refreserv_raidz'] tags = ['functional', 'refreserv'] [tests/functional/removal] pre = tests = ['removal_all_vdev', 'removal_cancel', 'removal_check_space', 'removal_condense_export', 'removal_multiple_indirection', 'removal_nopwrite', 'removal_remap_deadlists', 'removal_resume_export', 'removal_sanity', 'removal_with_add', 'removal_with_create_fs', 'removal_with_dedup', 'removal_with_errors', 'removal_with_export', 'removal_with_indirect', 'removal_with_ganging', 'removal_with_faulted', 'removal_with_remove', 'removal_with_scrub', 'removal_with_send', 'removal_with_send_recv', 'removal_with_snapshot', 'removal_with_write', 'removal_with_zdb', 'remove_expanded', 'remove_mirror', 'remove_mirror_sanity', 'remove_raidz', 'remove_indirect', 'remove_attach_mirror', 'removal_reservation'] tags = ['functional', 'removal'] [tests/functional/rename_dirs] tests = ['rename_dirs_001_pos'] tags = ['functional', 'rename_dirs'] [tests/functional/replacement] tests = ['attach_import', 'attach_multiple', 'attach_rebuild', 'attach_resilver', 'detach', 'rebuild_disabled_feature', 'rebuild_multiple', 'rebuild_raidz', 'replace_import', 'replace_rebuild', 'replace_resilver', 'resilver_restart_001', 'resilver_restart_002', 'scrub_cancel'] tags = ['functional', 'replacement'] [tests/functional/reservation] tests = ['reservation_001_pos', 'reservation_002_pos', 'reservation_003_pos', 'reservation_004_pos', 'reservation_005_pos', 'reservation_006_pos', 'reservation_007_pos', 'reservation_008_pos', 'reservation_009_pos', 'reservation_010_pos', 'reservation_011_pos', 'reservation_012_pos', 'reservation_013_pos', 'reservation_014_pos', 'reservation_015_pos', 'reservation_016_pos', 'reservation_017_pos', 'reservation_018_pos', 'reservation_019_pos', 'reservation_020_pos', 'reservation_021_neg', 'reservation_022_pos'] tags = ['functional', 'reservation'] [tests/functional/rootpool] tests = ['rootpool_002_neg', 'rootpool_003_neg', 'rootpool_007_pos'] tags = ['functional', 'rootpool'] [tests/functional/rsend] tests = ['recv_dedup', 'recv_dedup_encrypted_zvol', 'rsend_001_pos', 'rsend_002_pos', 'rsend_003_pos', 'rsend_004_pos', 'rsend_005_pos', 'rsend_006_pos', 'rsend_007_pos', 'rsend_008_pos', 'rsend_009_pos', 'rsend_010_pos', 'rsend_011_pos', 'rsend_012_pos', 'rsend_013_pos', 'rsend_014_pos', 'rsend_016_neg', 'rsend_019_pos', 'rsend_020_pos', 'rsend_021_pos', 'rsend_022_pos', 'rsend_024_pos', 'rsend_025_pos', 'rsend_026_neg', 'rsend_027_pos', 'rsend_028_neg', 'rsend_029_neg', 'rsend_030_pos', 'rsend_031_pos', 'send-c_verify_ratio', 'send-c_verify_contents', 'send-c_props', 'send-c_incremental', 'send-c_volume', 'send-c_zstream_recompress', 'send-c_zstreamdump', 'send-c_lz4_disabled', 'send-c_recv_lz4_disabled', 'send-c_mixed_compression', 'send-c_stream_size_estimate', 'send-c_embedded_blocks', 'send-c_resume', 'send-cpL_varied_recsize', 'send-c_recv_dedup', 'send-L_toggle', 'send_encrypted_incremental', 'send_encrypted_freeobjects', 'send_encrypted_hierarchy', 'send_encrypted_props', 'send_encrypted_truncated_files', 'send_freeobjects', 'send_realloc_files', 'send_realloc_encrypted_files', 'send_spill_block', 'send_holds', 'send_hole_birth', 'send_mixed_raw', 'send-wR_encrypted_zvol', 'send_partial_dataset', 'send_invalid', 'send_doall', 'send_raw_spill_block', 'send_raw_ashift', 'send_raw_large_blocks'] tags = ['functional', 'rsend'] [tests/functional/scrub_mirror] tests = ['scrub_mirror_001_pos', 'scrub_mirror_002_pos', 'scrub_mirror_003_pos', 'scrub_mirror_004_pos'] tags = ['functional', 'scrub_mirror'] [tests/functional/slog] tests = ['slog_001_pos', 'slog_002_pos', 'slog_003_pos', 'slog_004_pos', 'slog_005_pos', 'slog_006_pos', 'slog_007_pos', 'slog_008_neg', 'slog_009_neg', 'slog_010_neg', 'slog_011_neg', 'slog_012_neg', 'slog_013_pos', 'slog_014_pos', 'slog_015_neg', 'slog_replay_fs_001', 'slog_replay_fs_002', 'slog_replay_volume', 'slog_016_pos'] tags = ['functional', 'slog'] [tests/functional/snapshot] tests = ['clone_001_pos', 'rollback_001_pos', 'rollback_002_pos', 'rollback_003_pos', 'snapshot_001_pos', 'snapshot_002_pos', 'snapshot_003_pos', 'snapshot_004_pos', 'snapshot_005_pos', 'snapshot_006_pos', 'snapshot_007_pos', 'snapshot_008_pos', 'snapshot_009_pos', 'snapshot_010_pos', 'snapshot_011_pos', 'snapshot_012_pos', 'snapshot_013_pos', 'snapshot_014_pos', 'snapshot_017_pos', 'snapshot_018_pos'] tags = ['functional', 'snapshot'] [tests/functional/snapused] tests = ['snapused_001_pos', 'snapused_002_pos', 'snapused_003_pos', 'snapused_004_pos', 'snapused_005_pos'] tags = ['functional', 'snapused'] [tests/functional/sparse] tests = ['sparse_001_pos'] tags = ['functional', 'sparse'] [tests/functional/stat] tests = ['stat_001_pos'] tags = ['functional', 'stat'] [tests/functional/suid] tests = ['suid_write_to_suid', 'suid_write_to_sgid', 'suid_write_to_suid_sgid', 'suid_write_to_none', 'suid_write_zil_replay'] tags = ['functional', 'suid'] [tests/functional/trim] tests = ['autotrim_integrity', 'autotrim_config', 'autotrim_trim_integrity', 'trim_integrity', 'trim_config', 'trim_l2arc'] tags = ['functional', 'trim'] [tests/functional/truncate] tests = ['truncate_001_pos', 'truncate_002_pos', 'truncate_timestamps'] tags = ['functional', 'truncate'] [tests/functional/upgrade] tests = ['upgrade_userobj_001_pos', 'upgrade_readonly_pool'] tags = ['functional', 'upgrade'] [tests/functional/userquota] tests = [ 'userquota_001_pos', 'userquota_002_pos', 'userquota_003_pos', 'userquota_004_pos', 'userquota_005_neg', 'userquota_006_pos', 'userquota_007_pos', 'userquota_008_pos', 'userquota_009_pos', 'userquota_010_pos', 'userquota_011_pos', 'userquota_012_neg', 'userspace_001_pos', 'userspace_002_pos', 'userspace_encrypted', 'userspace_send_encrypted', 'userspace_encrypted_13709'] tags = ['functional', 'userquota'] [tests/functional/vdev_disk:Linux] pre = post = tests = ['page_alignment'] tags = ['functional', 'vdev_disk'] [tests/functional/vdev_zaps] tests = ['vdev_zaps_001_pos', 'vdev_zaps_002_pos', 'vdev_zaps_003_pos', 'vdev_zaps_004_pos', 'vdev_zaps_005_pos', 'vdev_zaps_006_pos', 'vdev_zaps_007_pos'] tags = ['functional', 'vdev_zaps'] [tests/functional/write_dirs] tests = ['write_dirs_001_pos', 'write_dirs_002_pos'] tags = ['functional', 'write_dirs'] [tests/functional/xattr] tests = ['xattr_001_pos', 'xattr_002_neg', 'xattr_003_neg', 'xattr_004_pos', 'xattr_005_pos', 'xattr_006_pos', 'xattr_007_neg', 'xattr_011_pos', 'xattr_012_pos', 'xattr_013_pos', 'xattr_compat'] tags = ['functional', 'xattr'] [tests/functional/zvol/zvol_ENOSPC] tests = ['zvol_ENOSPC_001_pos'] tags = ['functional', 'zvol', 'zvol_ENOSPC'] [tests/functional/zvol/zvol_cli] tests = ['zvol_cli_001_pos', 'zvol_cli_002_pos', 'zvol_cli_003_neg'] tags = ['functional', 'zvol', 'zvol_cli'] [tests/functional/zvol/zvol_misc] tests = ['zvol_misc_002_pos', 'zvol_misc_hierarchy', 'zvol_misc_rename_inuse', 'zvol_misc_snapdev', 'zvol_misc_trim', 'zvol_misc_volmode', 'zvol_misc_zil'] tags = ['functional', 'zvol', 'zvol_misc'] [tests/functional/zvol/zvol_stress] tests = ['zvol_stress'] tags = ['functional', 'zvol', 'zvol_stress'] [tests/functional/zvol/zvol_swap] tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_004_pos'] tags = ['functional', 'zvol', 'zvol_swap'] [tests/functional/libzfs] tests = ['many_fds', 'libzfs_input'] tags = ['functional', 'libzfs'] [tests/functional/log_spacemap] tests = ['log_spacemap_import_logs'] pre = post = tags = ['functional', 'log_spacemap'] [tests/functional/l2arc] tests = ['l2arc_arcstats_pos', 'l2arc_mfuonly_pos', 'l2arc_l2miss_pos', 'persist_l2arc_001_pos', 'persist_l2arc_002_pos', 'persist_l2arc_003_neg', 'persist_l2arc_004_pos', 'persist_l2arc_005_pos'] tags = ['functional', 'l2arc'] [tests/functional/zpool_influxdb] tests = ['zpool_influxdb'] tags = ['functional', 'zpool_influxdb'] diff --git a/tests/zfs-tests/include/tunables.cfg b/tests/zfs-tests/include/tunables.cfg index 721cf27f48ca..b4d7c4f72bab 100644 --- a/tests/zfs-tests/include/tunables.cfg +++ b/tests/zfs-tests/include/tunables.cfg @@ -1,107 +1,108 @@ # This file exports variables for each tunable used in the test suite. # # Different platforms use different names for most tunables. To avoid littering # the tests with conditional logic for deciding how to set each tunable, the # logic is instead consolidated to this one file. # # Any use of tunables in tests must use a name defined here. New entries # should be added to the table as needed. Please keep the table sorted # alphabetically for ease of maintenance. # # Platform-specific tunables should still use a NAME from this table for # consistency. Enter UNSUPPORTED in the column for platforms on which the # tunable is not implemented. UNAME=$(uname) # NAME FreeBSD tunable Linux tunable cat <<%%%% | ADMIN_SNAPSHOT UNSUPPORTED zfs_admin_snapshot ALLOW_REDACTED_DATASET_MOUNT allow_redacted_dataset_mount zfs_allow_redacted_dataset_mount ARC_MAX arc.max zfs_arc_max ARC_MIN arc.min zfs_arc_min ASYNC_BLOCK_MAX_BLOCKS async_block_max_blocks zfs_async_block_max_blocks CHECKSUM_EVENTS_PER_SECOND checksum_events_per_second zfs_checksum_events_per_second COMMIT_TIMEOUT_PCT commit_timeout_pct zfs_commit_timeout_pct COMPRESSED_ARC_ENABLED compressed_arc_enabled zfs_compressed_arc_enabled CONDENSE_INDIRECT_COMMIT_ENTRY_DELAY_MS condense.indirect_commit_entry_delay_ms zfs_condense_indirect_commit_entry_delay_ms CONDENSE_INDIRECT_OBSOLETE_PCT condense.indirect_obsolete_pct zfs_condense_indirect_obsolete_pct CONDENSE_MIN_MAPPING_BYTES condense.min_mapping_bytes zfs_condense_min_mapping_bytes DBUF_CACHE_SHIFT dbuf.cache_shift dbuf_cache_shift +DDT_ZAP_DEFAULT_BS ddt_zap_default_bs ddt_zap_default_bs DEADMAN_CHECKTIME_MS deadman.checktime_ms zfs_deadman_checktime_ms DEADMAN_EVENTS_PER_SECOND deadman_events_per_second zfs_deadman_events_per_second DEADMAN_FAILMODE deadman.failmode zfs_deadman_failmode DEADMAN_SYNCTIME_MS deadman.synctime_ms zfs_deadman_synctime_ms DEADMAN_ZIOTIME_MS deadman.ziotime_ms zfs_deadman_ziotime_ms DISABLE_IVSET_GUID_CHECK disable_ivset_guid_check zfs_disable_ivset_guid_check DMU_OFFSET_NEXT_SYNC dmu_offset_next_sync zfs_dmu_offset_next_sync EMBEDDED_SLOG_MIN_MS embedded_slog_min_ms zfs_embedded_slog_min_ms INITIALIZE_CHUNK_SIZE initialize_chunk_size zfs_initialize_chunk_size INITIALIZE_VALUE initialize_value zfs_initialize_value KEEP_LOG_SPACEMAPS_AT_EXPORT keep_log_spacemaps_at_export zfs_keep_log_spacemaps_at_export LUA_MAX_MEMLIMIT lua.max_memlimit zfs_lua_max_memlimit L2ARC_MFUONLY l2arc.mfuonly l2arc_mfuonly L2ARC_NOPREFETCH l2arc.noprefetch l2arc_noprefetch L2ARC_REBUILD_BLOCKS_MIN_L2SIZE l2arc.rebuild_blocks_min_l2size l2arc_rebuild_blocks_min_l2size L2ARC_REBUILD_ENABLED l2arc.rebuild_enabled l2arc_rebuild_enabled L2ARC_TRIM_AHEAD l2arc.trim_ahead l2arc_trim_ahead L2ARC_WRITE_BOOST l2arc.write_boost l2arc_write_boost L2ARC_WRITE_MAX l2arc.write_max l2arc_write_max LIVELIST_CONDENSE_NEW_ALLOC livelist.condense.new_alloc zfs_livelist_condense_new_alloc LIVELIST_CONDENSE_SYNC_CANCEL livelist.condense.sync_cancel zfs_livelist_condense_sync_cancel LIVELIST_CONDENSE_SYNC_PAUSE livelist.condense.sync_pause zfs_livelist_condense_sync_pause LIVELIST_CONDENSE_ZTHR_CANCEL livelist.condense.zthr_cancel zfs_livelist_condense_zthr_cancel LIVELIST_CONDENSE_ZTHR_PAUSE livelist.condense.zthr_pause zfs_livelist_condense_zthr_pause LIVELIST_MAX_ENTRIES livelist.max_entries zfs_livelist_max_entries LIVELIST_MIN_PERCENT_SHARED livelist.min_percent_shared zfs_livelist_min_percent_shared MAX_DATASET_NESTING max_dataset_nesting zfs_max_dataset_nesting MAX_MISSING_TVDS max_missing_tvds zfs_max_missing_tvds METASLAB_DEBUG_LOAD metaslab.debug_load metaslab_debug_load METASLAB_FORCE_GANGING metaslab.force_ganging metaslab_force_ganging MULTIHOST_FAIL_INTERVALS multihost.fail_intervals zfs_multihost_fail_intervals MULTIHOST_HISTORY multihost.history zfs_multihost_history MULTIHOST_IMPORT_INTERVALS multihost.import_intervals zfs_multihost_import_intervals MULTIHOST_INTERVAL multihost.interval zfs_multihost_interval OVERRIDE_ESTIMATE_RECORDSIZE send.override_estimate_recordsize zfs_override_estimate_recordsize PREFETCH_DISABLE prefetch.disable zfs_prefetch_disable RAIDZ_EXPAND_MAX_REFLOW_BYTES vdev.expand_max_reflow_bytes raidz_expand_max_reflow_bytes REBUILD_SCRUB_ENABLED rebuild_scrub_enabled zfs_rebuild_scrub_enabled REMOVAL_SUSPEND_PROGRESS removal_suspend_progress zfs_removal_suspend_progress REMOVE_MAX_SEGMENT remove_max_segment zfs_remove_max_segment RESILVER_MIN_TIME_MS resilver_min_time_ms zfs_resilver_min_time_ms SCAN_LEGACY scan_legacy zfs_scan_legacy SCAN_SUSPEND_PROGRESS scan_suspend_progress zfs_scan_suspend_progress SCAN_VDEV_LIMIT scan_vdev_limit zfs_scan_vdev_limit SCRUB_AFTER_EXPAND scrub_after_expand zfs_scrub_after_expand SEND_HOLES_WITHOUT_BIRTH_TIME send_holes_without_birth_time send_holes_without_birth_time SLOW_IO_EVENTS_PER_SECOND slow_io_events_per_second zfs_slow_io_events_per_second SPA_ASIZE_INFLATION spa.asize_inflation spa_asize_inflation SPA_DISCARD_MEMORY_LIMIT spa.discard_memory_limit zfs_spa_discard_memory_limit SPA_LOAD_VERIFY_DATA spa.load_verify_data spa_load_verify_data SPA_LOAD_VERIFY_METADATA spa.load_verify_metadata spa_load_verify_metadata TRIM_EXTENT_BYTES_MIN trim.extent_bytes_min zfs_trim_extent_bytes_min TRIM_METASLAB_SKIP trim.metaslab_skip zfs_trim_metaslab_skip TRIM_TXG_BATCH trim.txg_batch zfs_trim_txg_batch TXG_HISTORY txg.history zfs_txg_history TXG_TIMEOUT txg.timeout zfs_txg_timeout UNLINK_SUSPEND_PROGRESS UNSUPPORTED zfs_unlink_suspend_progress VDEV_FILE_LOGICAL_ASHIFT vdev.file.logical_ashift vdev_file_logical_ashift VDEV_FILE_PHYSICAL_ASHIFT vdev.file.physical_ashift vdev_file_physical_ashift VDEV_MAX_AUTO_ASHIFT vdev.max_auto_ashift zfs_vdev_max_auto_ashift VDEV_MIN_MS_COUNT vdev.min_ms_count zfs_vdev_min_ms_count VDEV_VALIDATE_SKIP vdev.validate_skip vdev_validate_skip VOL_INHIBIT_DEV UNSUPPORTED zvol_inhibit_dev VOL_MODE vol.mode zvol_volmode VOL_RECURSIVE vol.recursive UNSUPPORTED VOL_USE_BLK_MQ UNSUPPORTED zvol_use_blk_mq BCLONE_ENABLED zfs_bclone_enabled zfs_bclone_enabled BCLONE_WAIT_DIRTY zfs_bclone_wait_dirty zfs_bclone_wait_dirty XATTR_COMPAT xattr_compat zfs_xattr_compat ZEVENT_LEN_MAX zevent.len_max zfs_zevent_len_max ZEVENT_RETAIN_MAX zevent.retain_max zfs_zevent_retain_max ZIO_SLOW_IO_MS zio.slow_io_ms zio_slow_io_ms ZIL_SAXATTR zil_saxattr zfs_zil_saxattr %%%% while read name FreeBSD Linux; do eval "export ${name}=\$${UNAME}" done diff --git a/tests/zfs-tests/tests/Makefile.am b/tests/zfs-tests/tests/Makefile.am index 00f306122daa..a55c86bd4d4f 100644 --- a/tests/zfs-tests/tests/Makefile.am +++ b/tests/zfs-tests/tests/Makefile.am @@ -1,2127 +1,2130 @@ CLEANFILES = dist_noinst_DATA = include $(top_srcdir)/config/Substfiles.am datadir_zfs_tests_testsdir = $(datadir)/$(PACKAGE)/zfs-tests/tests nobase_dist_datadir_zfs_tests_tests_DATA = \ perf/nfs-sample.cfg \ perf/perf.shlib \ \ perf/fio/mkfiles.fio \ perf/fio/random_reads.fio \ perf/fio/random_readwrite.fio \ perf/fio/random_readwrite_fixed.fio \ perf/fio/random_writes.fio \ perf/fio/sequential_reads.fio \ perf/fio/sequential_readwrite.fio \ perf/fio/sequential_writes.fio nobase_dist_datadir_zfs_tests_tests_SCRIPTS = \ perf/regression/random_reads.ksh \ perf/regression/random_readwrite.ksh \ perf/regression/random_readwrite_fixed.ksh \ perf/regression/random_writes.ksh \ perf/regression/random_writes_zil.ksh \ perf/regression/sequential_reads_arc_cached_clone.ksh \ perf/regression/sequential_reads_arc_cached.ksh \ perf/regression/sequential_reads_dbuf_cached.ksh \ perf/regression/sequential_reads.ksh \ perf/regression/sequential_writes.ksh \ perf/regression/setup.ksh \ \ perf/scripts/prefetch_io.sh # These lists can be regenerated by running make regen-tests at the root, or, on a *clean* source: # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -executable -name '*.in' | sort | sed 's/\.in$//;s/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' -executable -name '*.in' | sort | sed 's/\.in$//;s/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -name '*.in' ! -name '*.c' | grep -Fe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # # simd and tmpfile are Linux-only and not installed elsewhere # # C programs are specced in ../Makefile.am above as part of the main Makefile find_common := find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' regen: @$(MAKE) -C $(top_builddir) clean @$(MAKE) clean $(SED) $(ac_inplace) '/^# -- >8 --/q' Makefile.am echo >> Makefile.am echo 'nobase_nodist_datadir_zfs_tests_tests_DATA = \' >> Makefile.am $(find_common) ! -executable -name '*.in' | sort | sed 's/\.in$$//;s/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo 'nobase_nodist_datadir_zfs_tests_tests_SCRIPTS = \' >> Makefile.am $(find_common) -executable -name '*.in' | sort | sed 's/\.in$$//;s/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo >> Makefile.am echo 'SUBSTFILES += $$(nobase_nodist_datadir_zfs_tests_tests_DATA) $$(nobase_nodist_datadir_zfs_tests_tests_SCRIPTS)' >> Makefile.am echo >> Makefile.am echo 'if BUILD_LINUX' >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \' >> Makefile.am $(find_common) ! -name '*.in' ! -name '*.c' | grep -Fe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo 'endif' >> Makefile.am echo >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_DATA += \' >> Makefile.am $(find_common) ! -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \' >> Makefile.am $(find_common) -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am # -- >8 -- nobase_nodist_datadir_zfs_tests_tests_DATA = \ functional/pam/utilities.kshlib nobase_nodist_datadir_zfs_tests_tests_SCRIPTS = \ functional/pyzfs/pyzfs_unittest.ksh SUBSTFILES += $(nobase_nodist_datadir_zfs_tests_tests_DATA) $(nobase_nodist_datadir_zfs_tests_tests_SCRIPTS) if BUILD_LINUX nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \ functional/simd/simd_supported.ksh \ functional/tmpfile/cleanup.ksh \ functional/tmpfile/setup.ksh endif nobase_dist_datadir_zfs_tests_tests_DATA += \ functional/acl/acl.cfg \ functional/acl/acl_common.kshlib \ functional/alloc_class/alloc_class.cfg \ functional/alloc_class/alloc_class.kshlib \ functional/atime/atime.cfg \ functional/atime/atime_common.kshlib \ functional/bclone/bclone.cfg \ functional/bclone/bclone_common.kshlib \ functional/bclone/bclone_corner_cases.kshlib \ functional/block_cloning/block_cloning.kshlib \ functional/cache/cache.cfg \ functional/cache/cache.kshlib \ functional/cachefile/cachefile.cfg \ functional/cachefile/cachefile.kshlib \ functional/casenorm/casenorm.cfg \ functional/casenorm/casenorm.kshlib \ functional/channel_program/channel_common.kshlib \ functional/channel_program/lua_core/tst.args_to_lua.out \ functional/channel_program/lua_core/tst.args_to_lua.zcp \ functional/channel_program/lua_core/tst.divide_by_zero.err \ functional/channel_program/lua_core/tst.divide_by_zero.zcp \ functional/channel_program/lua_core/tst.exists.zcp \ functional/channel_program/lua_core/tst.large_prog.out \ functional/channel_program/lua_core/tst.large_prog.zcp \ functional/channel_program/lua_core/tst.lib_base.lua \ functional/channel_program/lua_core/tst.lib_coroutine.lua \ functional/channel_program/lua_core/tst.lib_strings.lua \ functional/channel_program/lua_core/tst.lib_table.lua \ functional/channel_program/lua_core/tst.nested_neg.zcp \ functional/channel_program/lua_core/tst.nested_pos.zcp \ functional/channel_program/lua_core/tst.recursive.zcp \ functional/channel_program/lua_core/tst.return_large.zcp \ functional/channel_program/lua_core/tst.return_recursive_table.zcp \ functional/channel_program/lua_core/tst.stack_gsub.err \ functional/channel_program/lua_core/tst.stack_gsub.zcp \ functional/channel_program/lua_core/tst.timeout.zcp \ functional/channel_program/synctask_core/tst.bookmark.copy.zcp \ functional/channel_program/synctask_core/tst.bookmark.create.zcp \ functional/channel_program/synctask_core/tst.get_index_props.out \ functional/channel_program/synctask_core/tst.get_index_props.zcp \ functional/channel_program/synctask_core/tst.get_number_props.out \ functional/channel_program/synctask_core/tst.get_number_props.zcp \ functional/channel_program/synctask_core/tst.get_string_props.out \ functional/channel_program/synctask_core/tst.get_string_props.zcp \ functional/channel_program/synctask_core/tst.promote_conflict.zcp \ functional/channel_program/synctask_core/tst.set_props.zcp \ functional/channel_program/synctask_core/tst.snapshot_destroy.zcp \ functional/channel_program/synctask_core/tst.snapshot_neg.zcp \ functional/channel_program/synctask_core/tst.snapshot_recursive.zcp \ functional/channel_program/synctask_core/tst.snapshot_rename.zcp \ functional/channel_program/synctask_core/tst.snapshot_simple.zcp \ functional/checksum/default.cfg \ functional/clean_mirror/clean_mirror_common.kshlib \ functional/clean_mirror/default.cfg \ functional/cli_root/cli_common.kshlib \ functional/cli_root/zfs_copies/zfs_copies.cfg \ functional/cli_root/zfs_copies/zfs_copies.kshlib \ functional/cli_root/zfs_create/properties.kshlib \ functional/cli_root/zfs_create/zfs_create.cfg \ functional/cli_root/zfs_create/zfs_create_common.kshlib \ functional/cli_root/zfs_destroy/zfs_destroy.cfg \ functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib \ functional/cli_root/zfs_get/zfs_get_common.kshlib \ functional/cli_root/zfs_get/zfs_get_list_d.kshlib \ functional/cli_root/zfs_jail/jail.conf \ functional/cli_root/zfs_load-key/HEXKEY \ functional/cli_root/zfs_load-key/PASSPHRASE \ functional/cli_root/zfs_load-key/RAWKEY \ functional/cli_root/zfs_load-key/zfs_load-key.cfg \ functional/cli_root/zfs_load-key/zfs_load-key_common.kshlib \ functional/cli_root/zfs_mount/zfs_mount.cfg \ functional/cli_root/zfs_mount/zfs_mount.kshlib \ functional/cli_root/zfs_promote/zfs_promote.cfg \ functional/cli_root/zfs_receive/zstd_test_data.txt \ functional/cli_root/zfs_rename/zfs_rename.cfg \ functional/cli_root/zfs_rename/zfs_rename.kshlib \ functional/cli_root/zfs_rollback/zfs_rollback.cfg \ functional/cli_root/zfs_rollback/zfs_rollback_common.kshlib \ functional/cli_root/zfs_send/zfs_send.cfg \ functional/cli_root/zfs_set/zfs_set_common.kshlib \ functional/cli_root/zfs_share/zfs_share.cfg \ functional/cli_root/zfs_snapshot/zfs_snapshot.cfg \ functional/cli_root/zfs_unmount/zfs_unmount.cfg \ functional/cli_root/zfs_unmount/zfs_unmount.kshlib \ functional/cli_root/zfs_upgrade/zfs_upgrade.kshlib \ functional/cli_root/zfs_wait/zfs_wait.kshlib \ functional/cli_root/zpool_add/zpool_add.cfg \ functional/cli_root/zpool_add/zpool_add.kshlib \ functional/cli_root/zpool_clear/zpool_clear.cfg \ functional/cli_root/zpool_create/draidcfg.gz \ functional/cli_root/zpool_create/zpool_create.cfg \ functional/cli_root/zpool_create/zpool_create.shlib \ functional/cli_root/zpool_destroy/zpool_destroy.cfg \ functional/cli_root/zpool_events/zpool_events.cfg \ functional/cli_root/zpool_events/zpool_events.kshlib \ functional/cli_root/zpool_expand/zpool_expand.cfg \ functional/cli_root/zpool_export/zpool_export.cfg \ functional/cli_root/zpool_export/zpool_export.kshlib \ functional/cli_root/zpool_get/vdev_get.cfg \ functional/cli_root/zpool_get/zpool_get.cfg \ functional/cli_root/zpool_get/zpool_get_parsable.cfg \ functional/cli_root/zpool_import/blockfiles/cryptv0.dat.bz2 \ functional/cli_root/zpool_import/blockfiles/missing_ivset.dat.bz2 \ functional/cli_root/zpool_import/blockfiles/unclean_export.dat.bz2 \ functional/cli_root/zpool_import/zpool_import.cfg \ functional/cli_root/zpool_import/zpool_import.kshlib \ functional/cli_root/zpool_initialize/zpool_initialize.kshlib \ functional/cli_root/zpool_labelclear/labelclear.cfg \ functional/cli_root/zpool_remove/zpool_remove.cfg \ functional/cli_root/zpool_reopen/zpool_reopen.cfg \ functional/cli_root/zpool_reopen/zpool_reopen.shlib \ functional/cli_root/zpool_resilver/zpool_resilver.cfg \ functional/cli_root/zpool_scrub/zpool_scrub.cfg \ functional/cli_root/zpool_split/zpool_split.cfg \ functional/cli_root/zpool_trim/zpool_trim.kshlib \ functional/cli_root/zpool_upgrade/blockfiles/zfs-broken-mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-broken-mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v10.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v11.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v12.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v13.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v14.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v15.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz21.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz22.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz23.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v4.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v5.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v6.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v7.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v8.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v999.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v9.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-vBROKEN.dat.bz2 \ functional/cli_root/zpool_upgrade/zpool_upgrade.cfg \ functional/cli_root/zpool_upgrade/zpool_upgrade.kshlib \ functional/cli_root/zpool_wait/zpool_wait.kshlib \ functional/cli_root/zhack/library.kshlib \ functional/cli_user/misc/misc.cfg \ functional/cli_user/zfs_list/zfs_list.cfg \ functional/cli_user/zfs_list/zfs_list.kshlib \ functional/compression/compress.cfg \ functional/compression/testpool_zstd.tar.gz \ functional/deadman/deadman.cfg \ functional/delegate/delegate.cfg \ functional/delegate/delegate_common.kshlib \ functional/devices/devices.cfg \ functional/devices/devices_common.kshlib \ functional/events/events.cfg \ functional/events/events_common.kshlib \ functional/fault/fault.cfg \ functional/grow/grow.cfg \ functional/history/history.cfg \ functional/history/history_common.kshlib \ functional/history/i386.migratedpool.DAT.Z \ functional/history/i386.orig_history.txt \ functional/history/sparc.migratedpool.DAT.Z \ functional/history/sparc.orig_history.txt \ functional/history/zfs-pool-v4.dat.Z \ functional/inheritance/config001.cfg \ functional/inheritance/config002.cfg \ functional/inheritance/config003.cfg \ functional/inheritance/config004.cfg \ functional/inheritance/config005.cfg \ functional/inheritance/config006.cfg \ functional/inheritance/config007.cfg \ functional/inheritance/config008.cfg \ functional/inheritance/config009.cfg \ functional/inheritance/config010.cfg \ functional/inheritance/config011.cfg \ functional/inheritance/config012.cfg \ functional/inheritance/config013.cfg \ functional/inheritance/config014.cfg \ functional/inheritance/config015.cfg \ functional/inheritance/config016.cfg \ functional/inheritance/config017.cfg \ functional/inheritance/config018.cfg \ functional/inheritance/config019.cfg \ functional/inheritance/config020.cfg \ functional/inheritance/config021.cfg \ functional/inheritance/config022.cfg \ functional/inheritance/config023.cfg \ functional/inheritance/config024.cfg \ functional/inheritance/inherit.kshlib \ functional/inheritance/README.config \ functional/inheritance/README.state \ functional/inheritance/state001.cfg \ functional/inheritance/state002.cfg \ functional/inheritance/state003.cfg \ functional/inheritance/state004.cfg \ functional/inheritance/state005.cfg \ functional/inheritance/state006.cfg \ functional/inheritance/state007.cfg \ functional/inheritance/state008.cfg \ functional/inheritance/state009.cfg \ functional/inheritance/state010.cfg \ functional/inheritance/state011.cfg \ functional/inheritance/state012.cfg \ functional/inheritance/state013.cfg \ functional/inheritance/state014.cfg \ functional/inheritance/state015.cfg \ functional/inheritance/state016.cfg \ functional/inheritance/state017.cfg \ functional/inheritance/state018.cfg \ functional/inheritance/state019.cfg \ functional/inheritance/state020.cfg \ functional/inheritance/state021.cfg \ functional/inheritance/state022.cfg \ functional/inheritance/state023.cfg \ functional/inheritance/state024.cfg \ functional/inuse/inuse.cfg \ functional/io/io.cfg \ functional/l2arc/l2arc.cfg \ functional/largest_pool/largest_pool.cfg \ functional/migration/migration.cfg \ functional/migration/migration.kshlib \ functional/mmap/mmap.cfg \ functional/mmp/mmp.cfg \ functional/mmp/mmp.kshlib \ functional/mv_files/mv_files.cfg \ functional/mv_files/mv_files_common.kshlib \ functional/nopwrite/nopwrite.shlib \ functional/no_space/enospc.cfg \ functional/online_offline/online_offline.cfg \ functional/pool_checkpoint/pool_checkpoint.kshlib \ functional/projectquota/projectquota.cfg \ functional/projectquota/projectquota_common.kshlib \ functional/quota/quota.cfg \ functional/quota/quota.kshlib \ functional/redacted_send/redacted.cfg \ functional/redacted_send/redacted.kshlib \ functional/redundancy/redundancy.cfg \ functional/redundancy/redundancy.kshlib \ functional/refreserv/refreserv.cfg \ functional/removal/removal.kshlib \ functional/replacement/replacement.cfg \ functional/reservation/reservation.cfg \ functional/reservation/reservation.shlib \ functional/rsend/dedup_encrypted_zvol.bz2 \ functional/rsend/dedup_encrypted_zvol.zsend.bz2 \ functional/rsend/dedup.zsend.bz2 \ functional/rsend/fs.tar.gz \ functional/rsend/rsend.cfg \ functional/rsend/rsend.kshlib \ functional/scrub_mirror/default.cfg \ functional/scrub_mirror/scrub_mirror_common.kshlib \ functional/slog/slog.cfg \ functional/slog/slog.kshlib \ functional/snapshot/snapshot.cfg \ functional/snapused/snapused.kshlib \ functional/sparse/sparse.cfg \ functional/trim/trim.cfg \ functional/trim/trim.kshlib \ functional/truncate/truncate.cfg \ functional/upgrade/upgrade_common.kshlib \ functional/user_namespace/user_namespace.cfg \ functional/user_namespace/user_namespace_common.kshlib \ functional/userquota/13709_reproducer.bz2 \ functional/userquota/userquota.cfg \ functional/userquota/userquota_common.kshlib \ functional/vdev_zaps/vdev_zaps.kshlib \ functional/xattr/xattr.cfg \ functional/xattr/xattr_common.kshlib \ functional/zvol/zvol.cfg \ functional/zvol/zvol_cli/zvol_cli.cfg \ functional/zvol/zvol_common.shlib \ functional/zvol/zvol_ENOSPC/zvol_ENOSPC.cfg \ functional/zvol/zvol_misc/zvol_misc_common.kshlib \ functional/zvol/zvol_swap/zvol_swap.cfg \ functional/idmap_mount/idmap_mount.cfg \ functional/idmap_mount/idmap_mount_common.kshlib nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \ functional/acl/off/cleanup.ksh \ functional/acl/off/dosmode.ksh \ functional/acl/off/posixmode.ksh \ functional/acl/off/setup.ksh \ functional/acl/posix/cleanup.ksh \ functional/acl/posix/posix_001_pos.ksh \ functional/acl/posix/posix_002_pos.ksh \ functional/acl/posix/posix_003_pos.ksh \ functional/acl/posix/posix_004_pos.ksh \ functional/acl/posix-sa/cleanup.ksh \ functional/acl/posix-sa/posix_001_pos.ksh \ functional/acl/posix-sa/posix_002_pos.ksh \ functional/acl/posix-sa/posix_003_pos.ksh \ functional/acl/posix-sa/posix_004_pos.ksh \ functional/acl/posix-sa/setup.ksh \ functional/acl/posix/setup.ksh \ functional/alloc_class/alloc_class_001_pos.ksh \ functional/alloc_class/alloc_class_002_neg.ksh \ functional/alloc_class/alloc_class_003_pos.ksh \ functional/alloc_class/alloc_class_004_pos.ksh \ functional/alloc_class/alloc_class_005_pos.ksh \ functional/alloc_class/alloc_class_006_pos.ksh \ functional/alloc_class/alloc_class_007_pos.ksh \ functional/alloc_class/alloc_class_008_pos.ksh \ functional/alloc_class/alloc_class_009_pos.ksh \ functional/alloc_class/alloc_class_010_pos.ksh \ functional/alloc_class/alloc_class_011_neg.ksh \ functional/alloc_class/alloc_class_012_pos.ksh \ functional/alloc_class/alloc_class_013_pos.ksh \ functional/alloc_class/alloc_class_014_neg.ksh \ functional/alloc_class/alloc_class_015_pos.ksh \ functional/alloc_class/cleanup.ksh \ functional/alloc_class/setup.ksh \ functional/append/file_append.ksh \ functional/append/threadsappend_001_pos.ksh \ functional/append/cleanup.ksh \ functional/append/setup.ksh \ functional/arc/arcstats_runtime_tuning.ksh \ functional/arc/cleanup.ksh \ functional/arc/dbufstats_001_pos.ksh \ functional/arc/dbufstats_002_pos.ksh \ functional/arc/dbufstats_003_pos.ksh \ functional/arc/setup.ksh \ functional/atime/atime_001_pos.ksh \ functional/atime/atime_002_neg.ksh \ functional/atime/atime_003_pos.ksh \ functional/atime/cleanup.ksh \ functional/atime/root_atime_off.ksh \ functional/atime/root_atime_on.ksh \ functional/atime/root_relatime_on.ksh \ functional/atime/setup.ksh \ functional/bclone/bclone_crossfs_corner_cases.ksh \ functional/bclone/bclone_crossfs_corner_cases_limited.ksh \ functional/bclone/bclone_crossfs_data.ksh \ functional/bclone/bclone_crossfs_embedded.ksh \ functional/bclone/bclone_crossfs_hole.ksh \ functional/bclone/bclone_diffprops_all.ksh \ functional/bclone/bclone_diffprops_checksum.ksh \ functional/bclone/bclone_diffprops_compress.ksh \ functional/bclone/bclone_diffprops_copies.ksh \ functional/bclone/bclone_diffprops_recordsize.ksh \ functional/bclone/bclone_prop_sync.ksh \ functional/bclone/bclone_samefs_corner_cases.ksh \ functional/bclone/bclone_samefs_corner_cases_limited.ksh \ functional/bclone/bclone_samefs_data.ksh \ functional/bclone/bclone_samefs_embedded.ksh \ functional/bclone/bclone_samefs_hole.ksh \ functional/bclone/cleanup.ksh \ functional/bclone/setup.ksh \ functional/block_cloning/cleanup.ksh \ functional/block_cloning/setup.ksh \ functional/block_cloning/block_cloning_clone_mmap_cached.ksh \ functional/block_cloning/block_cloning_clone_mmap_write.ksh \ functional/block_cloning/block_cloning_copyfilerange_cross_dataset.ksh \ functional/block_cloning/block_cloning_copyfilerange_fallback.ksh \ functional/block_cloning/block_cloning_copyfilerange_fallback_same_txg.ksh \ functional/block_cloning/block_cloning_copyfilerange.ksh \ functional/block_cloning/block_cloning_copyfilerange_partial.ksh \ functional/block_cloning/block_cloning_disabled_copyfilerange.ksh \ functional/block_cloning/block_cloning_disabled_ficlone.ksh \ functional/block_cloning/block_cloning_disabled_ficlonerange.ksh \ functional/block_cloning/block_cloning_ficlone.ksh \ functional/block_cloning/block_cloning_ficlonerange.ksh \ functional/block_cloning/block_cloning_ficlonerange_partial.ksh \ functional/block_cloning/block_cloning_cross_enc_dataset.ksh \ functional/block_cloning/block_cloning_replay.ksh \ functional/block_cloning/block_cloning_replay_encrypted.ksh \ functional/block_cloning/block_cloning_lwb_buffer_overflow.ksh \ functional/bootfs/bootfs_001_pos.ksh \ functional/bootfs/bootfs_002_neg.ksh \ functional/bootfs/bootfs_003_pos.ksh \ functional/bootfs/bootfs_004_neg.ksh \ functional/bootfs/bootfs_005_neg.ksh \ functional/bootfs/bootfs_006_pos.ksh \ functional/bootfs/bootfs_007_pos.ksh \ functional/bootfs/bootfs_008_pos.ksh \ functional/bootfs/cleanup.ksh \ functional/bootfs/setup.ksh \ functional/btree/btree_negative.ksh \ functional/btree/btree_positive.ksh \ functional/cache/cache_001_pos.ksh \ functional/cache/cache_002_pos.ksh \ functional/cache/cache_003_pos.ksh \ functional/cache/cache_004_neg.ksh \ functional/cache/cache_005_neg.ksh \ functional/cache/cache_006_pos.ksh \ functional/cache/cache_007_neg.ksh \ functional/cache/cache_008_neg.ksh \ functional/cache/cache_009_pos.ksh \ functional/cache/cache_010_pos.ksh \ functional/cache/cache_011_pos.ksh \ functional/cache/cache_012_pos.ksh \ functional/cache/cleanup.ksh \ functional/cachefile/cachefile_001_pos.ksh \ functional/cachefile/cachefile_002_pos.ksh \ functional/cachefile/cachefile_003_pos.ksh \ functional/cachefile/cachefile_004_pos.ksh \ functional/cachefile/cleanup.ksh \ functional/cachefile/setup.ksh \ functional/cache/setup.ksh \ functional/casenorm/case_all_values.ksh \ functional/casenorm/cleanup.ksh \ functional/casenorm/insensitive_formd_delete.ksh \ functional/casenorm/insensitive_formd_lookup.ksh \ functional/casenorm/insensitive_none_delete.ksh \ functional/casenorm/insensitive_none_lookup.ksh \ functional/casenorm/mixed_create_failure.ksh \ functional/casenorm/mixed_formd_delete.ksh \ functional/casenorm/mixed_formd_lookup_ci.ksh \ functional/casenorm/mixed_formd_lookup.ksh \ functional/casenorm/mixed_none_delete.ksh \ functional/casenorm/mixed_none_lookup_ci.ksh \ functional/casenorm/mixed_none_lookup.ksh \ functional/casenorm/norm_all_values.ksh \ functional/casenorm/sensitive_formd_delete.ksh \ functional/casenorm/sensitive_formd_lookup.ksh \ functional/casenorm/sensitive_none_delete.ksh \ functional/casenorm/sensitive_none_lookup.ksh \ functional/casenorm/setup.ksh \ functional/channel_program/lua_core/cleanup.ksh \ functional/channel_program/lua_core/setup.ksh \ functional/channel_program/lua_core/tst.args_to_lua.ksh \ functional/channel_program/lua_core/tst.divide_by_zero.ksh \ functional/channel_program/lua_core/tst.exists.ksh \ functional/channel_program/lua_core/tst.integer_illegal.ksh \ functional/channel_program/lua_core/tst.integer_overflow.ksh \ functional/channel_program/lua_core/tst.language_functions_neg.ksh \ functional/channel_program/lua_core/tst.language_functions_pos.ksh \ functional/channel_program/lua_core/tst.large_prog.ksh \ functional/channel_program/lua_core/tst.libraries.ksh \ functional/channel_program/lua_core/tst.memory_limit.ksh \ functional/channel_program/lua_core/tst.nested_neg.ksh \ functional/channel_program/lua_core/tst.nested_pos.ksh \ functional/channel_program/lua_core/tst.nvlist_to_lua.ksh \ functional/channel_program/lua_core/tst.recursive_neg.ksh \ functional/channel_program/lua_core/tst.recursive_pos.ksh \ functional/channel_program/lua_core/tst.return_large.ksh \ functional/channel_program/lua_core/tst.return_nvlist_neg.ksh \ functional/channel_program/lua_core/tst.return_nvlist_pos.ksh \ functional/channel_program/lua_core/tst.return_recursive_table.ksh \ functional/channel_program/lua_core/tst.stack_gsub.ksh \ functional/channel_program/lua_core/tst.timeout.ksh \ functional/channel_program/synctask_core/cleanup.ksh \ functional/channel_program/synctask_core/setup.ksh \ functional/channel_program/synctask_core/tst.bookmark.copy.ksh \ functional/channel_program/synctask_core/tst.bookmark.create.ksh \ functional/channel_program/synctask_core/tst.destroy_fs.ksh \ functional/channel_program/synctask_core/tst.destroy_snap.ksh \ functional/channel_program/synctask_core/tst.get_count_and_limit.ksh \ functional/channel_program/synctask_core/tst.get_index_props.ksh \ functional/channel_program/synctask_core/tst.get_mountpoint.ksh \ functional/channel_program/synctask_core/tst.get_neg.ksh \ functional/channel_program/synctask_core/tst.get_number_props.ksh \ functional/channel_program/synctask_core/tst.get_string_props.ksh \ functional/channel_program/synctask_core/tst.get_type.ksh \ functional/channel_program/synctask_core/tst.get_userquota.ksh \ functional/channel_program/synctask_core/tst.get_written.ksh \ functional/channel_program/synctask_core/tst.inherit.ksh \ functional/channel_program/synctask_core/tst.list_bookmarks.ksh \ functional/channel_program/synctask_core/tst.list_children.ksh \ functional/channel_program/synctask_core/tst.list_clones.ksh \ functional/channel_program/synctask_core/tst.list_holds.ksh \ functional/channel_program/synctask_core/tst.list_snapshots.ksh \ functional/channel_program/synctask_core/tst.list_system_props.ksh \ functional/channel_program/synctask_core/tst.list_user_props.ksh \ functional/channel_program/synctask_core/tst.parse_args_neg.ksh \ functional/channel_program/synctask_core/tst.promote_conflict.ksh \ functional/channel_program/synctask_core/tst.promote_multiple.ksh \ functional/channel_program/synctask_core/tst.promote_simple.ksh \ functional/channel_program/synctask_core/tst.rollback_mult.ksh \ functional/channel_program/synctask_core/tst.rollback_one.ksh \ functional/channel_program/synctask_core/tst.set_props.ksh \ functional/channel_program/synctask_core/tst.snapshot_destroy.ksh \ functional/channel_program/synctask_core/tst.snapshot_neg.ksh \ functional/channel_program/synctask_core/tst.snapshot_recursive.ksh \ functional/channel_program/synctask_core/tst.snapshot_rename.ksh \ functional/channel_program/synctask_core/tst.snapshot_simple.ksh \ functional/channel_program/synctask_core/tst.terminate_by_signal.ksh \ functional/chattr/chattr_001_pos.ksh \ functional/chattr/chattr_002_neg.ksh \ functional/chattr/cleanup.ksh \ functional/chattr/setup.ksh \ functional/checksum/cleanup.ksh \ functional/checksum/filetest_001_pos.ksh \ functional/checksum/filetest_002_pos.ksh \ functional/checksum/run_blake3_test.ksh \ functional/checksum/run_edonr_test.ksh \ functional/checksum/run_sha2_test.ksh \ functional/checksum/run_skein_test.ksh \ functional/checksum/setup.ksh \ functional/clean_mirror/clean_mirror_001_pos.ksh \ functional/clean_mirror/clean_mirror_002_pos.ksh \ functional/clean_mirror/clean_mirror_003_pos.ksh \ functional/clean_mirror/clean_mirror_004_pos.ksh \ functional/clean_mirror/cleanup.ksh \ functional/clean_mirror/setup.ksh \ functional/cli_root/zinject/zinject_args.ksh \ functional/cli_root/zdb/zdb_002_pos.ksh \ functional/cli_root/zdb/zdb_003_pos.ksh \ functional/cli_root/zdb/zdb_004_pos.ksh \ functional/cli_root/zdb/zdb_005_pos.ksh \ functional/cli_root/zdb/zdb_006_pos.ksh \ functional/cli_root/zdb/zdb_args_neg.ksh \ functional/cli_root/zdb/zdb_args_pos.ksh \ functional/cli_root/zdb/zdb_backup.ksh \ functional/cli_root/zdb/zdb_block_size_histogram.ksh \ functional/cli_root/zdb/zdb_checksum.ksh \ functional/cli_root/zdb/zdb_decompress.ksh \ functional/cli_root/zdb/zdb_decompress_zstd.ksh \ functional/cli_root/zdb/zdb_display_block.ksh \ functional/cli_root/zdb/zdb_encrypted.ksh \ functional/cli_root/zdb/zdb_label_checksum.ksh \ functional/cli_root/zdb/zdb_object_range_neg.ksh \ functional/cli_root/zdb/zdb_object_range_pos.ksh \ functional/cli_root/zdb/zdb_objset_id.ksh \ functional/cli_root/zdb/zdb_recover_2.ksh \ functional/cli_root/zdb/zdb_recover.ksh \ functional/cli_root/zfs_bookmark/cleanup.ksh \ functional/cli_root/zfs_bookmark/setup.ksh \ functional/cli_root/zfs_bookmark/zfs_bookmark_cliargs.ksh \ functional/cli_root/zfs_change-key/cleanup.ksh \ functional/cli_root/zfs_change-key/setup.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_child.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_clones.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_format.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_inherit.ksh \ functional/cli_root/zfs_change-key/zfs_change-key.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_load.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_location.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_pbkdf2iters.ksh \ functional/cli_root/zfs/cleanup.ksh \ functional/cli_root/zfs_clone/cleanup.ksh \ functional/cli_root/zfs_clone/setup.ksh \ functional/cli_root/zfs_clone/zfs_clone_001_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_002_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_003_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_004_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_005_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_006_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_007_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_008_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_009_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_010_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_deeply_nested.ksh \ functional/cli_root/zfs_clone/zfs_clone_encrypted.ksh \ functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh \ functional/cli_root/zfs_copies/cleanup.ksh \ functional/cli_root/zfs_copies/setup.ksh \ functional/cli_root/zfs_copies/zfs_copies_001_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_002_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_003_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_004_neg.ksh \ functional/cli_root/zfs_copies/zfs_copies_005_neg.ksh \ functional/cli_root/zfs_copies/zfs_copies_006_pos.ksh \ functional/cli_root/zfs_create/cleanup.ksh \ functional/cli_root/zfs_create/setup.ksh \ functional/cli_root/zfs_create/zfs_create_001_pos.ksh \ functional/cli_root/zfs_create/zfs_create_002_pos.ksh \ functional/cli_root/zfs_create/zfs_create_003_pos.ksh \ functional/cli_root/zfs_create/zfs_create_004_pos.ksh \ functional/cli_root/zfs_create/zfs_create_005_pos.ksh \ functional/cli_root/zfs_create/zfs_create_006_pos.ksh \ functional/cli_root/zfs_create/zfs_create_007_pos.ksh \ functional/cli_root/zfs_create/zfs_create_008_neg.ksh \ functional/cli_root/zfs_create/zfs_create_009_neg.ksh \ functional/cli_root/zfs_create/zfs_create_010_neg.ksh \ functional/cli_root/zfs_create/zfs_create_011_pos.ksh \ functional/cli_root/zfs_create/zfs_create_012_pos.ksh \ functional/cli_root/zfs_create/zfs_create_013_pos.ksh \ functional/cli_root/zfs_create/zfs_create_014_pos.ksh \ functional/cli_root/zfs_create/zfs_create_crypt_combos.ksh \ functional/cli_root/zfs_create/zfs_create_dryrun.ksh \ functional/cli_root/zfs_create/zfs_create_encrypted.ksh \ functional/cli_root/zfs_create/zfs_create_nomount.ksh \ functional/cli_root/zfs_create/zfs_create_verbose.ksh \ functional/cli_root/zfs_destroy/cleanup.ksh \ functional/cli_root/zfs_destroy/setup.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_condense_and_disable.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_condense_races.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_dedup.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_001_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_002_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_003_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_004_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_005_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_006_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_007_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_008_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_009_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_010_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_011_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_012_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_013_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_014_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_dev_removal.ksh \ functional/cli_root/zfs_diff/cleanup.ksh \ functional/cli_root/zfs_diff/setup.ksh \ functional/cli_root/zfs_diff/zfs_diff_changes.ksh \ functional/cli_root/zfs_diff/zfs_diff_cliargs.ksh \ functional/cli_root/zfs_diff/zfs_diff_encrypted.ksh \ functional/cli_root/zfs_diff/zfs_diff_mangle.ksh \ functional/cli_root/zfs_diff/zfs_diff_timestamp.ksh \ functional/cli_root/zfs_diff/zfs_diff_types.ksh \ functional/cli_root/zfs_get/cleanup.ksh \ functional/cli_root/zfs_get/setup.ksh \ functional/cli_root/zfs_get/zfs_get_001_pos.ksh \ functional/cli_root/zfs_get/zfs_get_002_pos.ksh \ functional/cli_root/zfs_get/zfs_get_003_pos.ksh \ functional/cli_root/zfs_get/zfs_get_004_pos.ksh \ functional/cli_root/zfs_get/zfs_get_005_neg.ksh \ functional/cli_root/zfs_get/zfs_get_006_neg.ksh \ functional/cli_root/zfs_get/zfs_get_007_neg.ksh \ functional/cli_root/zfs_get/zfs_get_008_pos.ksh \ functional/cli_root/zfs_get/zfs_get_009_pos.ksh \ functional/cli_root/zfs_get/zfs_get_010_neg.ksh \ functional/cli_root/zfs_ids_to_path/cleanup.ksh \ functional/cli_root/zfs_ids_to_path/setup.ksh \ functional/cli_root/zfs_ids_to_path/zfs_ids_to_path_001_pos.ksh \ functional/cli_root/zfs_inherit/cleanup.ksh \ functional/cli_root/zfs_inherit/setup.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_001_neg.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_mountpoint.ksh \ functional/cli_root/zfs_jail/cleanup.ksh \ functional/cli_root/zfs_jail/setup.ksh \ functional/cli_root/zfs_jail/zfs_jail_001_pos.ksh \ functional/cli_root/zfs_load-key/cleanup.ksh \ functional/cli_root/zfs_load-key/setup.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_all.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_file.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_https.ksh \ functional/cli_root/zfs_load-key/zfs_load-key.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_location.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_noop.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_recursive.ksh \ functional/cli_root/zfs_mount/cleanup.ksh \ functional/cli_root/zfs_mount/setup.ksh \ functional/cli_root/zfs_mount/zfs_mount_001_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_002_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_003_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_004_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_005_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_006_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_009_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_011_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_012_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_013_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_014_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_001_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_fail.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_mountpoints.ksh \ functional/cli_root/zfs_mount/zfs_mount_encrypted.ksh \ functional/cli_root/zfs_mount/zfs_mount_recursive.ksh \ functional/cli_root/zfs_mount/zfs_mount_remount.ksh \ functional/cli_root/zfs_mount/zfs_mount_test_race.ksh \ functional/cli_root/zfs_mount/zfs_multi_mount.ksh \ functional/cli_root/zfs_program/cleanup.ksh \ functional/cli_root/zfs_program/setup.ksh \ functional/cli_root/zfs_program/zfs_program_json.ksh \ functional/cli_root/zfs_promote/cleanup.ksh \ functional/cli_root/zfs_promote/setup.ksh \ functional/cli_root/zfs_promote/zfs_promote_001_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_002_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_003_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_004_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_005_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_006_neg.ksh \ functional/cli_root/zfs_promote/zfs_promote_007_neg.ksh \ functional/cli_root/zfs_promote/zfs_promote_008_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_encryptionroot.ksh \ functional/cli_root/zfs_property/cleanup.ksh \ functional/cli_root/zfs_property/setup.ksh \ functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh \ functional/cli_root/zfs_receive/cleanup.ksh \ functional/cli_root/zfs_receive/receive-o-x_props_aliases.ksh \ functional/cli_root/zfs_receive/receive-o-x_props_override.ksh \ functional/cli_root/zfs_receive/setup.ksh \ functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_002_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_003_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_005_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_006_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_007_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_008_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_009_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_010_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_011_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_012_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_014_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_015_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_016_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_-e.ksh \ functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh \ functional/cli_root/zfs_receive/zfs_receive_from_zstd.ksh \ functional/cli_root/zfs_receive/zfs_receive_new_props.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw_-d.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw_incremental.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw.ksh \ functional/cli_root/zfs_receive/zfs_receive_to_encrypted.ksh \ functional/cli_root/zfs_receive/zfs_receive_-wR-encrypted-mix.ksh \ functional/cli_root/zfs_receive/zfs_receive_corrective.ksh \ functional/cli_root/zfs_receive/zfs_receive_compressed_corrective.ksh \ functional/cli_root/zfs_receive/zfs_receive_large_block_corrective.ksh \ functional/cli_root/zfs_rename/cleanup.ksh \ functional/cli_root/zfs_rename/setup.ksh \ functional/cli_root/zfs_rename/zfs_rename_001_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_002_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_003_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_004_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_005_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_006_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_007_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_008_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_009_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_010_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_011_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_012_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_013_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_014_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_encrypted_child.ksh \ functional/cli_root/zfs_rename/zfs_rename_mountpoint.ksh \ functional/cli_root/zfs_rename/zfs_rename_nounmount.ksh \ functional/cli_root/zfs_rename/zfs_rename_to_encrypted.ksh \ functional/cli_root/zfs_reservation/cleanup.ksh \ functional/cli_root/zfs_reservation/setup.ksh \ functional/cli_root/zfs_reservation/zfs_reservation_001_pos.ksh \ functional/cli_root/zfs_reservation/zfs_reservation_002_pos.ksh \ functional/cli_root/zfs_rollback/cleanup.ksh \ functional/cli_root/zfs_rollback/setup.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_001_pos.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_002_pos.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_003_neg.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_004_neg.ksh \ functional/cli_root/zfs_send/cleanup.ksh \ functional/cli_root/zfs_send/setup.ksh \ functional/cli_root/zfs_send/zfs_send_001_pos.ksh \ functional/cli_root/zfs_send/zfs_send_002_pos.ksh \ functional/cli_root/zfs_send/zfs_send_003_pos.ksh \ functional/cli_root/zfs_send/zfs_send_004_neg.ksh \ functional/cli_root/zfs_send/zfs_send_005_pos.ksh \ functional/cli_root/zfs_send/zfs_send_006_pos.ksh \ functional/cli_root/zfs_send/zfs_send_007_pos.ksh \ functional/cli_root/zfs_send/zfs_send-b.ksh \ functional/cli_root/zfs_send/zfs_send_encrypted.ksh \ functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh \ functional/cli_root/zfs_send/zfs_send_raw.ksh \ functional/cli_root/zfs_send/zfs_send_skip_missing.ksh \ functional/cli_root/zfs_send/zfs_send_sparse.ksh \ functional/cli_root/zfs_set/cache_001_pos.ksh \ functional/cli_root/zfs_set/cache_002_neg.ksh \ functional/cli_root/zfs_set/canmount_001_pos.ksh \ functional/cli_root/zfs_set/canmount_002_pos.ksh \ functional/cli_root/zfs_set/canmount_003_pos.ksh \ functional/cli_root/zfs_set/canmount_004_pos.ksh \ functional/cli_root/zfs_set/checksum_001_pos.ksh \ functional/cli_root/zfs_set/cleanup.ksh \ functional/cli_root/zfs_set/compression_001_pos.ksh \ functional/cli_root/zfs_set/mountpoint_001_pos.ksh \ functional/cli_root/zfs_set/mountpoint_002_pos.ksh \ functional/cli_root/zfs_set/mountpoint_003_pos.ksh \ functional/cli_root/zfs_set/onoffs_001_pos.ksh \ functional/cli_root/zfs_set/property_alias_001_pos.ksh \ functional/cli_root/zfs_set/readonly_001_pos.ksh \ functional/cli_root/zfs_set/reservation_001_neg.ksh \ functional/cli_root/zfs_set/ro_props_001_pos.ksh \ functional/cli_root/zfs_set/setup.ksh \ functional/cli_root/zfs_set/share_mount_001_neg.ksh \ functional/cli_root/zfs_set/snapdir_001_pos.ksh \ functional/cli_root/zfs/setup.ksh \ functional/cli_root/zfs_set/user_property_001_pos.ksh \ functional/cli_root/zfs_set/user_property_002_pos.ksh \ functional/cli_root/zfs_set/user_property_003_neg.ksh \ functional/cli_root/zfs_set/user_property_004_pos.ksh \ functional/cli_root/zfs_set/version_001_neg.ksh \ functional/cli_root/zfs_set/zfs_set_001_neg.ksh \ functional/cli_root/zfs_set/zfs_set_002_neg.ksh \ functional/cli_root/zfs_set/zfs_set_003_neg.ksh \ functional/cli_root/zfs_set/zfs_set_feature_activation.ksh \ functional/cli_root/zfs_set/zfs_set_keylocation.ksh \ functional/cli_root/zfs_set/zfs_set_nomount.ksh \ functional/cli_root/zfs_share/cleanup.ksh \ functional/cli_root/zfs_share/setup.ksh \ functional/cli_root/zfs_share/zfs_share_001_pos.ksh \ functional/cli_root/zfs_share/zfs_share_002_pos.ksh \ functional/cli_root/zfs_share/zfs_share_003_pos.ksh \ functional/cli_root/zfs_share/zfs_share_004_pos.ksh \ functional/cli_root/zfs_share/zfs_share_005_pos.ksh \ functional/cli_root/zfs_share/zfs_share_006_pos.ksh \ functional/cli_root/zfs_share/zfs_share_007_neg.ksh \ functional/cli_root/zfs_share/zfs_share_008_neg.ksh \ functional/cli_root/zfs_share/zfs_share_009_neg.ksh \ functional/cli_root/zfs_share/zfs_share_010_neg.ksh \ functional/cli_root/zfs_share/zfs_share_011_pos.ksh \ functional/cli_root/zfs_share/zfs_share_012_pos.ksh \ functional/cli_root/zfs_share/zfs_share_013_pos.ksh \ functional/cli_root/zfs_share/zfs_share_concurrent_shares.ksh \ functional/cli_root/zfs_share/zfs_share_after_mount.ksh \ functional/cli_root/zfs_snapshot/cleanup.ksh \ functional/cli_root/zfs_snapshot/setup.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_001_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_002_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_003_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_004_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_005_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_006_pos.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_007_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_008_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_009_pos.ksh \ functional/cli_root/zfs_sysfs/cleanup.ksh \ functional/cli_root/zfs_sysfs/setup.ksh \ functional/cli_root/zfs_sysfs/zfeature_set_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_get_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_set_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_sysfs_live.ksh \ functional/cli_root/zfs_sysfs/zpool_get_unsupported.ksh \ functional/cli_root/zfs_sysfs/zpool_set_unsupported.ksh \ functional/cli_root/zfs_unload-key/cleanup.ksh \ functional/cli_root/zfs_unload-key/setup.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key_all.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key_recursive.ksh \ functional/cli_root/zfs_unmount/cleanup.ksh \ functional/cli_root/zfs_unmount/setup.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_001_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_002_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_003_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_004_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_005_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_006_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_007_neg.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_008_neg.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_009_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_all_001_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_nested.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_unload_keys.ksh \ functional/cli_root/zfs_unshare/cleanup.ksh \ functional/cli_root/zfs_unshare/setup.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_001_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_002_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_003_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_004_neg.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_005_neg.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_006_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_007_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_008_pos.ksh \ functional/cli_root/zfs_upgrade/cleanup.ksh \ functional/cli_root/zfs_upgrade/setup.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_001_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_002_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_003_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_004_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_005_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_006_neg.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_007_neg.ksh \ functional/cli_root/zfs_wait/cleanup.ksh \ functional/cli_root/zfs_wait/setup.ksh \ functional/cli_root/zfs_wait/zfs_wait_deleteq.ksh \ functional/cli_root/zfs_wait/zfs_wait_getsubopt.ksh \ functional/cli_root/zfs/zfs_001_neg.ksh \ functional/cli_root/zfs/zfs_002_pos.ksh \ functional/cli_root/zfs/zfs_003_neg.ksh \ functional/cli_root/zhack/zhack_label_repair_001.ksh \ functional/cli_root/zhack/zhack_label_repair_002.ksh \ functional/cli_root/zhack/zhack_label_repair_003.ksh \ functional/cli_root/zhack/zhack_label_repair_004.ksh \ functional/cli_root/zpool_add/add_nested_replacing_spare.ksh \ functional/cli_root/zpool_add/add-o_ashift.ksh \ functional/cli_root/zpool_add/add_prop_ashift.ksh \ functional/cli_root/zpool_add/cleanup.ksh \ functional/cli_root/zpool_add/setup.ksh \ functional/cli_root/zpool_add/zpool_add--allow-ashift-mismatch.ksh \ functional/cli_root/zpool_add/zpool_add_001_pos.ksh \ functional/cli_root/zpool_add/zpool_add_002_pos.ksh \ functional/cli_root/zpool_add/zpool_add_003_pos.ksh \ functional/cli_root/zpool_add/zpool_add_004_pos.ksh \ functional/cli_root/zpool_add/zpool_add_005_pos.ksh \ functional/cli_root/zpool_add/zpool_add_006_pos.ksh \ functional/cli_root/zpool_add/zpool_add_007_neg.ksh \ functional/cli_root/zpool_add/zpool_add_008_neg.ksh \ functional/cli_root/zpool_add/zpool_add_009_neg.ksh \ functional/cli_root/zpool_add/zpool_add_010_pos.ksh \ functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh \ functional/cli_root/zpool_attach/attach-o_ashift.ksh \ functional/cli_root/zpool_attach/cleanup.ksh \ functional/cli_root/zpool_attach/setup.ksh \ functional/cli_root/zpool_attach/zpool_attach_001_neg.ksh \ functional/cli_root/zpool/cleanup.ksh \ functional/cli_root/zpool_clear/cleanup.ksh \ functional/cli_root/zpool_clear/setup.ksh \ functional/cli_root/zpool_clear/zpool_clear_001_pos.ksh \ functional/cli_root/zpool_clear/zpool_clear_002_neg.ksh \ functional/cli_root/zpool_clear/zpool_clear_003_neg.ksh \ functional/cli_root/zpool_clear/zpool_clear_readonly.ksh \ functional/cli_root/zpool_create/cleanup.ksh \ functional/cli_root/zpool_create/create-o_ashift.ksh \ functional/cli_root/zpool_create/setup.ksh \ functional/cli_root/zpool_create/zpool_create_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_004_pos.ksh \ functional/cli_root/zpool_create/zpool_create_005_pos.ksh \ functional/cli_root/zpool_create/zpool_create_006_pos.ksh \ functional/cli_root/zpool_create/zpool_create_007_neg.ksh \ functional/cli_root/zpool_create/zpool_create_008_pos.ksh \ functional/cli_root/zpool_create/zpool_create_009_neg.ksh \ functional/cli_root/zpool_create/zpool_create_010_neg.ksh \ functional/cli_root/zpool_create/zpool_create_011_neg.ksh \ functional/cli_root/zpool_create/zpool_create_012_neg.ksh \ functional/cli_root/zpool_create/zpool_create_014_neg.ksh \ functional/cli_root/zpool_create/zpool_create_015_neg.ksh \ functional/cli_root/zpool_create/zpool_create_016_pos.ksh \ functional/cli_root/zpool_create/zpool_create_017_neg.ksh \ functional/cli_root/zpool_create/zpool_create_018_pos.ksh \ functional/cli_root/zpool_create/zpool_create_019_pos.ksh \ functional/cli_root/zpool_create/zpool_create_020_pos.ksh \ functional/cli_root/zpool_create/zpool_create_021_pos.ksh \ functional/cli_root/zpool_create/zpool_create_022_pos.ksh \ functional/cli_root/zpool_create/zpool_create_023_neg.ksh \ functional/cli_root/zpool_create/zpool_create_024_pos.ksh \ functional/cli_root/zpool_create/zpool_create_crypt_combos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_004_pos.ksh \ functional/cli_root/zpool_create/zpool_create_dryrun_output.ksh \ functional/cli_root/zpool_create/zpool_create_encrypted.ksh \ functional/cli_root/zpool_create/zpool_create_features_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_004_neg.ksh \ functional/cli_root/zpool_create/zpool_create_features_005_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_006_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_007_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_008_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_009_pos.ksh \ functional/cli_root/zpool_create/zpool_create_tempname.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_001_pos.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_002_pos.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_003_neg.ksh \ functional/cli_root/zpool_detach/cleanup.ksh \ functional/cli_root/zpool_detach/setup.ksh \ functional/cli_root/zpool_detach/zpool_detach_001_neg.ksh \ functional/cli_root/zpool_events/cleanup.ksh \ functional/cli_root/zpool_events/setup.ksh \ functional/cli_root/zpool_events/zpool_events_clear.ksh \ functional/cli_root/zpool_events/zpool_events_clear_retained.ksh \ functional/cli_root/zpool_events/zpool_events_cliargs.ksh \ functional/cli_root/zpool_events/zpool_events_duplicates.ksh \ functional/cli_root/zpool_events/zpool_events_errors.ksh \ functional/cli_root/zpool_events/zpool_events_follow.ksh \ functional/cli_root/zpool_events/zpool_events_poolname.ksh \ functional/cli_root/zpool_expand/cleanup.ksh \ functional/cli_root/zpool_expand/setup.ksh \ functional/cli_root/zpool_expand/zpool_expand_001_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_003_neg.ksh \ functional/cli_root/zpool_expand/zpool_expand_004_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_005_pos.ksh \ functional/cli_root/zpool_export/cleanup.ksh \ functional/cli_root/zpool_export/setup.ksh \ functional/cli_root/zpool_export/zpool_export_001_pos.ksh \ functional/cli_root/zpool_export/zpool_export_002_pos.ksh \ functional/cli_root/zpool_export/zpool_export_003_neg.ksh \ functional/cli_root/zpool_export/zpool_export_004_pos.ksh \ functional/cli_root/zpool_export/zpool_export_parallel_admin.ksh \ functional/cli_root/zpool_export/zpool_export_parallel_pos.ksh \ functional/cli_root/zpool_get/cleanup.ksh \ functional/cli_root/zpool_get/setup.ksh \ functional/cli_root/zpool_get/vdev_get_001_pos.ksh \ functional/cli_root/zpool_get/zpool_get_001_pos.ksh \ functional/cli_root/zpool_get/zpool_get_002_pos.ksh \ functional/cli_root/zpool_get/zpool_get_003_pos.ksh \ functional/cli_root/zpool_get/zpool_get_004_neg.ksh \ functional/cli_root/zpool_get/zpool_get_005_pos.ksh \ functional/cli_root/zpool_history/cleanup.ksh \ functional/cli_root/zpool_history/setup.ksh \ functional/cli_root/zpool_history/zpool_history_001_neg.ksh \ functional/cli_root/zpool_history/zpool_history_002_pos.ksh \ functional/cli_root/zpool_import/cleanup.ksh \ functional/cli_root/zpool_import/import_cachefile_device_added.ksh \ functional/cli_root/zpool_import/import_cachefile_device_removed.ksh \ functional/cli_root/zpool_import/import_cachefile_device_replaced.ksh \ functional/cli_root/zpool_import/import_cachefile_mirror_attached.ksh \ functional/cli_root/zpool_import/import_cachefile_mirror_detached.ksh \ functional/cli_root/zpool_import/import_cachefile_paths_changed.ksh \ functional/cli_root/zpool_import/import_cachefile_shared_device.ksh \ functional/cli_root/zpool_import/import_devices_missing.ksh \ functional/cli_root/zpool_import/import_log_missing.ksh \ functional/cli_root/zpool_import/import_paths_changed.ksh \ functional/cli_root/zpool_import/import_rewind_config_changed.ksh \ functional/cli_root/zpool_import/import_rewind_device_replaced.ksh \ functional/cli_root/zpool_import/setup.ksh \ functional/cli_root/zpool_import/zpool_import_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_002_pos.ksh \ functional/cli_root/zpool_import/zpool_import_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_004_pos.ksh \ functional/cli_root/zpool_import/zpool_import_005_pos.ksh \ functional/cli_root/zpool_import/zpool_import_006_pos.ksh \ functional/cli_root/zpool_import/zpool_import_007_pos.ksh \ functional/cli_root/zpool_import/zpool_import_008_pos.ksh \ functional/cli_root/zpool_import/zpool_import_009_neg.ksh \ functional/cli_root/zpool_import/zpool_import_010_pos.ksh \ functional/cli_root/zpool_import/zpool_import_011_neg.ksh \ functional/cli_root/zpool_import/zpool_import_012_pos.ksh \ functional/cli_root/zpool_import/zpool_import_013_neg.ksh \ functional/cli_root/zpool_import/zpool_import_014_pos.ksh \ functional/cli_root/zpool_import/zpool_import_015_pos.ksh \ functional/cli_root/zpool_import/zpool_import_016_pos.ksh \ functional/cli_root/zpool_import/zpool_import_017_pos.ksh \ functional/cli_root/zpool_import/zpool_import_all_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_encrypted.ksh \ functional/cli_root/zpool_import/zpool_import_encrypted_load.ksh \ functional/cli_root/zpool_import/zpool_import_errata3.ksh \ functional/cli_root/zpool_import/zpool_import_errata4.ksh \ functional/cli_root/zpool_import/zpool_import_features_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_features_002_neg.ksh \ functional/cli_root/zpool_import/zpool_import_features_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_unclean_export.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_cachefile.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_cachefile_unclean_export.ksh \ functional/cli_root/zpool_import/zpool_import_missing_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_missing_002_pos.ksh \ functional/cli_root/zpool_import/zpool_import_missing_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_rename_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_status.ksh \ functional/cli_root/zpool_import/zpool_import_parallel_admin.ksh \ functional/cli_root/zpool_import/zpool_import_parallel_neg.ksh \ functional/cli_root/zpool_import/zpool_import_parallel_pos.ksh \ functional/cli_root/zpool_initialize/cleanup.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_attach_detach_add_remove.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_fault_export_import_online.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_import_export.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_offline_export_import_online.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_online_offline.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_split.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_start_and_cancel_neg.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_start_and_cancel_pos.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_suspend_resume.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_uninit.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_unsupported_vdevs.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_verify_checksums.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_verify_initialized.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_active.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_exported.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_removed.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_valid.ksh \ functional/cli_root/zpool_offline/cleanup.ksh \ functional/cli_root/zpool_offline/setup.ksh \ functional/cli_root/zpool_offline/zpool_offline_001_pos.ksh \ functional/cli_root/zpool_offline/zpool_offline_002_neg.ksh \ functional/cli_root/zpool_offline/zpool_offline_003_pos.ksh \ functional/cli_root/zpool_online/cleanup.ksh \ functional/cli_root/zpool_online/setup.ksh \ functional/cli_root/zpool_online/zpool_online_001_pos.ksh \ functional/cli_root/zpool_online/zpool_online_002_neg.ksh \ functional/cli_root/zpool_remove/cleanup.ksh \ functional/cli_root/zpool_remove/setup.ksh \ functional/cli_root/zpool_remove/zpool_remove_001_neg.ksh \ functional/cli_root/zpool_remove/zpool_remove_002_pos.ksh \ functional/cli_root/zpool_remove/zpool_remove_003_pos.ksh \ functional/cli_root/zpool_reopen/cleanup.ksh \ functional/cli_root/zpool_reopen/setup.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_001_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_002_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_003_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_004_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_005_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_006_neg.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_007_pos.ksh \ functional/cli_root/zpool_replace/cleanup.ksh \ functional/cli_root/zpool_replace/replace-o_ashift.ksh \ functional/cli_root/zpool_replace/replace_prop_ashift.ksh \ functional/cli_root/zpool_replace/setup.ksh \ functional/cli_root/zpool_replace/zpool_replace_001_neg.ksh \ functional/cli_root/zpool_resilver/cleanup.ksh \ functional/cli_root/zpool_resilver/setup.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_bad_args.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_restart.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_concurrent.ksh \ functional/cli_root/zpool_scrub/cleanup.ksh \ functional/cli_root/zpool_scrub/setup.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_001_neg.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_002_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_003_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_004_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_005_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_encrypted_unloaded.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_multiple_copies.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_offline_device.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_print_repairing.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_001_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_002_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_003_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_004_pos.ksh \ functional/cli_root/zpool_set/cleanup.ksh \ functional/cli_root/zpool_set/setup.ksh \ functional/cli_root/zpool/setup.ksh \ functional/cli_root/zpool_set/vdev_set_001_pos.ksh \ functional/cli_root/zpool_set/zpool_set_common.kshlib \ functional/cli_root/zpool_set/zpool_set_001_pos.ksh \ functional/cli_root/zpool_set/zpool_set_002_neg.ksh \ functional/cli_root/zpool_set/zpool_set_003_neg.ksh \ functional/cli_root/zpool_set/zpool_set_ashift.ksh \ functional/cli_root/zpool_set/user_property_001_pos.ksh \ functional/cli_root/zpool_set/user_property_002_neg.ksh \ functional/cli_root/zpool_set/zpool_set_features.ksh \ functional/cli_root/zpool_split/cleanup.ksh \ functional/cli_root/zpool_split/setup.ksh \ functional/cli_root/zpool_split/zpool_split_cliargs.ksh \ functional/cli_root/zpool_split/zpool_split_devices.ksh \ functional/cli_root/zpool_split/zpool_split_dryrun_output.ksh \ functional/cli_root/zpool_split/zpool_split_encryption.ksh \ functional/cli_root/zpool_split/zpool_split_indirect.ksh \ functional/cli_root/zpool_split/zpool_split_props.ksh \ functional/cli_root/zpool_split/zpool_split_resilver.ksh \ functional/cli_root/zpool_split/zpool_split_vdevs.ksh \ functional/cli_root/zpool_split/zpool_split_wholedisk.ksh \ functional/cli_root/zpool_status/cleanup.ksh \ functional/cli_root/zpool_status/setup.ksh \ functional/cli_root/zpool_status/zpool_status_001_pos.ksh \ functional/cli_root/zpool_status/zpool_status_002_pos.ksh \ functional/cli_root/zpool_status/zpool_status_003_pos.ksh \ functional/cli_root/zpool_status/zpool_status_004_pos.ksh \ functional/cli_root/zpool_status/zpool_status_005_pos.ksh \ functional/cli_root/zpool_status/zpool_status_006_pos.ksh \ functional/cli_root/zpool_status/zpool_status_007_pos.ksh \ functional/cli_root/zpool_status/zpool_status_008_pos.ksh \ functional/cli_root/zpool_status/zpool_status_features_001_pos.ksh \ functional/cli_root/zpool_sync/cleanup.ksh \ functional/cli_root/zpool_sync/setup.ksh \ functional/cli_root/zpool_sync/zpool_sync_001_pos.ksh \ functional/cli_root/zpool_sync/zpool_sync_002_neg.ksh \ functional/cli_root/zpool_trim/cleanup.ksh \ functional/cli_root/zpool_trim/setup.ksh \ functional/cli_root/zpool_trim/zpool_trim_attach_detach_add_remove.ksh \ functional/cli_root/zpool_trim/zpool_trim_fault_export_import_online.ksh \ functional/cli_root/zpool_trim/zpool_trim_import_export.ksh \ functional/cli_root/zpool_trim/zpool_trim_multiple.ksh \ functional/cli_root/zpool_trim/zpool_trim_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_offline_export_import_online.ksh \ functional/cli_root/zpool_trim/zpool_trim_online_offline.ksh \ functional/cli_root/zpool_trim/zpool_trim_partial.ksh \ functional/cli_root/zpool_trim/zpool_trim_rate.ksh \ functional/cli_root/zpool_trim/zpool_trim_rate_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_secure.ksh \ functional/cli_root/zpool_trim/zpool_trim_split.ksh \ functional/cli_root/zpool_trim/zpool_trim_start_and_cancel_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_start_and_cancel_pos.ksh \ functional/cli_root/zpool_trim/zpool_trim_suspend_resume.ksh \ functional/cli_root/zpool_trim/zpool_trim_unsupported_vdevs.ksh \ functional/cli_root/zpool_trim/zpool_trim_verify_checksums.ksh \ functional/cli_root/zpool_trim/zpool_trim_verify_trimmed.ksh \ functional/cli_root/zpool_upgrade/cleanup.ksh \ functional/cli_root/zpool_upgrade/setup.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_001_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_002_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_003_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_004_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_005_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_006_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_007_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_008_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_009_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_features_001_pos.ksh \ functional/cli_root/zpool_wait/cleanup.ksh \ functional/cli_root/zpool_wait/scan/cleanup.ksh \ functional/cli_root/zpool_wait/scan/setup.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_rebuild.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_replace_cancel.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_replace.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_resilver.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_basic.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_cancel.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_flag.ksh \ functional/cli_root/zpool_wait/setup.ksh \ functional/cli_root/zpool_wait/zpool_wait_discard.ksh \ functional/cli_root/zpool_wait/zpool_wait_freeing.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_basic.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_flag.ksh \ functional/cli_root/zpool_wait/zpool_wait_multiple.ksh \ functional/cli_root/zpool_wait/zpool_wait_no_activity.ksh \ functional/cli_root/zpool_wait/zpool_wait_remove_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_remove.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_basic.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_flag.ksh \ functional/cli_root/zpool_wait/zpool_wait_usage.ksh \ functional/cli_root/zpool/zpool_001_neg.ksh \ functional/cli_root/zpool/zpool_002_pos.ksh \ functional/cli_root/zpool/zpool_003_pos.ksh \ functional/cli_root/zpool/zpool_colors.ksh \ functional/cli_user/misc/arcstat_001_pos.ksh \ functional/cli_user/misc/arc_summary_001_pos.ksh \ functional/cli_user/misc/arc_summary_002_neg.ksh \ functional/cli_user/misc/zilstat_001_pos.ksh \ functional/cli_user/misc/cleanup.ksh \ functional/cli_user/misc/setup.ksh \ functional/cli_user/misc/zdb_001_neg.ksh \ functional/cli_user/misc/zfs_001_neg.ksh \ functional/cli_user/misc/zfs_allow_001_neg.ksh \ functional/cli_user/misc/zfs_clone_001_neg.ksh \ functional/cli_user/misc/zfs_create_001_neg.ksh \ functional/cli_user/misc/zfs_destroy_001_neg.ksh \ functional/cli_user/misc/zfs_get_001_neg.ksh \ functional/cli_user/misc/zfs_inherit_001_neg.ksh \ functional/cli_user/misc/zfs_mount_001_neg.ksh \ functional/cli_user/misc/zfs_promote_001_neg.ksh \ functional/cli_user/misc/zfs_receive_001_neg.ksh \ functional/cli_user/misc/zfs_rename_001_neg.ksh \ functional/cli_user/misc/zfs_rollback_001_neg.ksh \ functional/cli_user/misc/zfs_send_001_neg.ksh \ functional/cli_user/misc/zfs_set_001_neg.ksh \ functional/cli_user/misc/zfs_share_001_neg.ksh \ functional/cli_user/misc/zfs_snapshot_001_neg.ksh \ functional/cli_user/misc/zfs_unallow_001_neg.ksh \ functional/cli_user/misc/zfs_unmount_001_neg.ksh \ functional/cli_user/misc/zfs_unshare_001_neg.ksh \ functional/cli_user/misc/zfs_upgrade_001_neg.ksh \ functional/cli_user/misc/zpool_001_neg.ksh \ functional/cli_user/misc/zpool_add_001_neg.ksh \ functional/cli_user/misc/zpool_attach_001_neg.ksh \ functional/cli_user/misc/zpool_clear_001_neg.ksh \ functional/cli_user/misc/zpool_create_001_neg.ksh \ functional/cli_user/misc/zpool_destroy_001_neg.ksh \ functional/cli_user/misc/zpool_detach_001_neg.ksh \ functional/cli_user/misc/zpool_export_001_neg.ksh \ functional/cli_user/misc/zpool_get_001_neg.ksh \ functional/cli_user/misc/zpool_history_001_neg.ksh \ functional/cli_user/misc/zpool_import_001_neg.ksh \ functional/cli_user/misc/zpool_import_002_neg.ksh \ functional/cli_user/misc/zpool_offline_001_neg.ksh \ functional/cli_user/misc/zpool_online_001_neg.ksh \ functional/cli_user/misc/zpool_remove_001_neg.ksh \ functional/cli_user/misc/zpool_replace_001_neg.ksh \ functional/cli_user/misc/zpool_scrub_001_neg.ksh \ functional/cli_user/misc/zpool_set_001_neg.ksh \ functional/cli_user/misc/zpool_status_001_neg.ksh \ functional/cli_user/misc/zpool_upgrade_001_neg.ksh \ functional/cli_user/misc/zpool_wait_privilege.ksh \ functional/cli_user/zfs_list/cleanup.ksh \ functional/cli_user/zfs_list/setup.ksh \ functional/cli_user/zfs_list/zfs_list_001_pos.ksh \ functional/cli_user/zfs_list/zfs_list_002_pos.ksh \ functional/cli_user/zfs_list/zfs_list_003_pos.ksh \ functional/cli_user/zfs_list/zfs_list_004_neg.ksh \ functional/cli_user/zfs_list/zfs_list_005_neg.ksh \ functional/cli_user/zfs_list/zfs_list_007_pos.ksh \ functional/cli_user/zfs_list/zfs_list_008_neg.ksh \ functional/cli_user/zpool_iostat/cleanup.ksh \ functional/cli_user/zpool_iostat/setup.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_001_neg.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_002_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_003_neg.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_004_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_005_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_disable.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh \ functional/cli_user/zpool_list/cleanup.ksh \ functional/cli_user/zpool_list/setup.ksh \ functional/cli_user/zpool_list/zpool_list_001_pos.ksh \ functional/cli_user/zpool_list/zpool_list_002_neg.ksh \ functional/cli_user/zpool_status/cleanup.ksh \ functional/cli_user/zpool_status/setup.ksh \ functional/cli_user/zpool_status/zpool_status_003_pos.ksh \ functional/cli_user/zpool_status/zpool_status_-c_disable.ksh \ functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh \ functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh \ functional/compression/cleanup.ksh \ functional/compression/compress_001_pos.ksh \ functional/compression/compress_002_pos.ksh \ functional/compression/compress_003_pos.ksh \ functional/compression/compress_004_pos.ksh \ functional/compression/compress_zstd_bswap.ksh \ functional/compression/l2arc_compressed_arc_disabled.ksh \ functional/compression/l2arc_compressed_arc.ksh \ functional/compression/l2arc_encrypted.ksh \ functional/compression/l2arc_encrypted_no_compressed_arc.ksh \ functional/compression/setup.ksh \ functional/cp_files/cleanup.ksh \ functional/cp_files/cp_files_001_pos.ksh \ functional/cp_files/cp_files_002_pos.ksh \ functional/cp_files/cp_stress.ksh \ functional/cp_files/setup.ksh \ functional/crtime/cleanup.ksh \ functional/crtime/crtime_001_pos.ksh \ functional/crtime/setup.ksh \ functional/ctime/cleanup.ksh \ functional/ctime/ctime_001_pos.ksh \ functional/ctime/setup.ksh \ functional/deadman/deadman_ratelimit.ksh \ functional/deadman/deadman_sync.ksh \ functional/deadman/deadman_zio.ksh \ + functional/dedup/cleanup.ksh \ + functional/dedup/setup.ksh \ + functional/dedup/dedup_quota.ksh \ functional/delegate/cleanup.ksh \ functional/delegate/setup.ksh \ functional/delegate/zfs_allow_001_pos.ksh \ functional/delegate/zfs_allow_002_pos.ksh \ functional/delegate/zfs_allow_003_pos.ksh \ functional/delegate/zfs_allow_004_pos.ksh \ functional/delegate/zfs_allow_005_pos.ksh \ functional/delegate/zfs_allow_006_pos.ksh \ functional/delegate/zfs_allow_007_pos.ksh \ functional/delegate/zfs_allow_008_pos.ksh \ functional/delegate/zfs_allow_009_neg.ksh \ functional/delegate/zfs_allow_010_pos.ksh \ functional/delegate/zfs_allow_011_neg.ksh \ functional/delegate/zfs_allow_012_neg.ksh \ functional/delegate/zfs_unallow_001_pos.ksh \ functional/delegate/zfs_unallow_002_pos.ksh \ functional/delegate/zfs_unallow_003_pos.ksh \ functional/delegate/zfs_unallow_004_pos.ksh \ functional/delegate/zfs_unallow_005_pos.ksh \ functional/delegate/zfs_unallow_006_pos.ksh \ functional/delegate/zfs_unallow_007_neg.ksh \ functional/delegate/zfs_unallow_008_neg.ksh \ functional/devices/cleanup.ksh \ functional/devices/devices_001_pos.ksh \ functional/devices/devices_002_neg.ksh \ functional/devices/devices_003_pos.ksh \ functional/devices/setup.ksh \ functional/dos_attributes/cleanup.ksh \ functional/dos_attributes/read_dos_attrs_001.ksh \ functional/dos_attributes/setup.ksh \ functional/dos_attributes/write_dos_attrs_001.ksh \ functional/events/cleanup.ksh \ functional/events/events_001_pos.ksh \ functional/events/events_002_pos.ksh \ functional/events/setup.ksh \ functional/events/zed_cksum_config.ksh \ functional/events/zed_cksum_reported.ksh \ functional/events/zed_fd_spill.ksh \ functional/events/zed_io_config.ksh \ functional/events/zed_rc_filter.ksh \ functional/events/zed_slow_io.ksh \ functional/events/zed_slow_io_many_vdevs.ksh \ functional/exec/cleanup.ksh \ functional/exec/exec_001_pos.ksh \ functional/exec/exec_002_neg.ksh \ functional/exec/setup.ksh \ functional/fadvise/cleanup.ksh \ functional/fadvise/fadvise_sequential.ksh \ functional/fadvise/setup.ksh \ functional/fallocate/cleanup.ksh \ functional/fallocate/fallocate_prealloc.ksh \ functional/fallocate/fallocate_punch-hole.ksh \ functional/fallocate/fallocate_zero-range.ksh \ functional/fallocate/setup.ksh \ functional/fault/auto_offline_001_pos.ksh \ functional/fault/auto_online_001_pos.ksh \ functional/fault/auto_online_002_pos.ksh \ functional/fault/auto_replace_001_pos.ksh \ functional/fault/auto_replace_002_pos.ksh \ functional/fault/auto_spare_001_pos.ksh \ functional/fault/auto_spare_002_pos.ksh \ functional/fault/auto_spare_ashift.ksh \ functional/fault/auto_spare_multiple.ksh \ functional/fault/auto_spare_shared.ksh \ functional/fault/cleanup.ksh \ functional/fault/decompress_fault.ksh \ functional/fault/decrypt_fault.ksh \ functional/fault/scrub_after_resilver.ksh \ functional/fault/suspend_resume_single.ksh \ functional/fault/setup.ksh \ functional/fault/zpool_status_-s.ksh \ functional/features/async_destroy/async_destroy_001_pos.ksh \ functional/features/async_destroy/cleanup.ksh \ functional/features/async_destroy/setup.ksh \ functional/features/large_dnode/cleanup.ksh \ functional/features/large_dnode/large_dnode_001_pos.ksh \ functional/features/large_dnode/large_dnode_002_pos.ksh \ functional/features/large_dnode/large_dnode_003_pos.ksh \ functional/features/large_dnode/large_dnode_004_neg.ksh \ functional/features/large_dnode/large_dnode_005_pos.ksh \ functional/features/large_dnode/large_dnode_006_pos.ksh \ functional/features/large_dnode/large_dnode_007_neg.ksh \ functional/features/large_dnode/large_dnode_008_pos.ksh \ functional/features/large_dnode/large_dnode_009_pos.ksh \ functional/features/large_dnode/setup.ksh \ functional/grow/grow_pool_001_pos.ksh \ functional/grow/grow_replicas_001_pos.ksh \ functional/history/cleanup.ksh \ functional/history/history_001_pos.ksh \ functional/history/history_002_pos.ksh \ functional/history/history_003_pos.ksh \ functional/history/history_004_pos.ksh \ functional/history/history_005_neg.ksh \ functional/history/history_006_neg.ksh \ functional/history/history_007_pos.ksh \ functional/history/history_008_pos.ksh \ functional/history/history_009_pos.ksh \ functional/history/history_010_pos.ksh \ functional/history/setup.ksh \ functional/inheritance/cleanup.ksh \ functional/inheritance/inherit_001_pos.ksh \ functional/inuse/inuse_001_pos.ksh \ functional/inuse/inuse_003_pos.ksh \ functional/inuse/inuse_004_pos.ksh \ functional/inuse/inuse_005_pos.ksh \ functional/inuse/inuse_006_pos.ksh \ functional/inuse/inuse_007_pos.ksh \ functional/inuse/inuse_008_pos.ksh \ functional/inuse/inuse_009_pos.ksh \ functional/inuse/setup.ksh \ functional/io/cleanup.ksh \ functional/io/io_uring.ksh \ functional/io/libaio.ksh \ functional/io/mmap.ksh \ functional/io/posixaio.ksh \ functional/io/psync.ksh \ functional/io/setup.ksh \ functional/io/sync.ksh \ functional/l2arc/cleanup.ksh \ functional/l2arc/l2arc_arcstats_pos.ksh \ functional/l2arc/l2arc_l2miss_pos.ksh \ functional/l2arc/l2arc_mfuonly_pos.ksh \ functional/l2arc/persist_l2arc_001_pos.ksh \ functional/l2arc/persist_l2arc_002_pos.ksh \ functional/l2arc/persist_l2arc_003_neg.ksh \ functional/l2arc/persist_l2arc_004_pos.ksh \ functional/l2arc/persist_l2arc_005_pos.ksh \ functional/l2arc/setup.ksh \ functional/large_files/cleanup.ksh \ functional/large_files/large_files_001_pos.ksh \ functional/large_files/large_files_002_pos.ksh \ functional/large_files/setup.ksh \ functional/largest_pool/largest_pool_001_pos.ksh \ functional/libzfs/cleanup.ksh \ functional/libzfs/libzfs_input.ksh \ functional/libzfs/setup.ksh \ functional/limits/cleanup.ksh \ functional/limits/filesystem_count.ksh \ functional/limits/filesystem_limit.ksh \ functional/limits/setup.ksh \ functional/limits/snapshot_count.ksh \ functional/limits/snapshot_limit.ksh \ functional/link_count/cleanup.ksh \ functional/link_count/link_count_001.ksh \ functional/link_count/link_count_root_inode.ksh \ functional/link_count/setup.ksh \ functional/log_spacemap/log_spacemap_import_logs.ksh \ functional/migration/cleanup.ksh \ functional/migration/migration_001_pos.ksh \ functional/migration/migration_002_pos.ksh \ functional/migration/migration_003_pos.ksh \ functional/migration/migration_004_pos.ksh \ functional/migration/migration_005_pos.ksh \ functional/migration/migration_006_pos.ksh \ functional/migration/migration_007_pos.ksh \ functional/migration/migration_008_pos.ksh \ functional/migration/migration_009_pos.ksh \ functional/migration/migration_010_pos.ksh \ functional/migration/migration_011_pos.ksh \ functional/migration/migration_012_pos.ksh \ functional/migration/setup.ksh \ functional/mmap/cleanup.ksh \ functional/mmap/mmap_libaio_001_pos.ksh \ functional/mmap/mmap_mixed.ksh \ functional/mmap/mmap_read_001_pos.ksh \ functional/mmap/mmap_seek_001_pos.ksh \ functional/mmap/mmap_sync_001_pos.ksh \ functional/mmap/mmap_write_001_pos.ksh \ functional/mmap/setup.ksh \ functional/mmp/cleanup.ksh \ functional/mmp/mmp_active_import.ksh \ functional/mmp/mmp_exported_import.ksh \ functional/mmp/mmp_hostid.ksh \ functional/mmp/mmp_inactive_import.ksh \ functional/mmp/mmp_interval.ksh \ functional/mmp/mmp_on_off.ksh \ functional/mmp/mmp_on_thread.ksh \ functional/mmp/mmp_on_uberblocks.ksh \ functional/mmp/mmp_on_zdb.ksh \ functional/mmp/mmp_reset_interval.ksh \ functional/mmp/mmp_write_distribution.ksh \ functional/mmp/mmp_write_slow_disk.ksh \ functional/mmp/mmp_write_uberblocks.ksh \ functional/mmp/multihost_history.ksh \ functional/mmp/setup.ksh \ functional/mount/cleanup.ksh \ functional/mount/setup.ksh \ functional/mount/umount_001.ksh \ functional/mount/umountall_001.ksh \ functional/mount/umount_unlinked_drain.ksh \ functional/mv_files/cleanup.ksh \ functional/mv_files/mv_files_001_pos.ksh \ functional/mv_files/mv_files_002_pos.ksh \ functional/mv_files/random_creation.ksh \ functional/mv_files/setup.ksh \ functional/nestedfs/cleanup.ksh \ functional/nestedfs/nestedfs_001_pos.ksh \ functional/nestedfs/setup.ksh \ functional/nopwrite/cleanup.ksh \ functional/nopwrite/nopwrite_copies.ksh \ functional/nopwrite/nopwrite_mtime.ksh \ functional/nopwrite/nopwrite_negative.ksh \ functional/nopwrite/nopwrite_promoted_clone.ksh \ functional/nopwrite/nopwrite_recsize.ksh \ functional/nopwrite/nopwrite_sync.ksh \ functional/nopwrite/nopwrite_varying_compression.ksh \ functional/nopwrite/nopwrite_volume.ksh \ functional/nopwrite/setup.ksh \ functional/no_space/cleanup.ksh \ functional/no_space/enospc_001_pos.ksh \ functional/no_space/enospc_002_pos.ksh \ functional/no_space/enospc_003_pos.ksh \ functional/no_space/enospc_df.ksh \ functional/no_space/enospc_ganging.ksh \ functional/no_space/enospc_rm.ksh \ functional/no_space/setup.ksh \ functional/online_offline/cleanup.ksh \ functional/online_offline/online_offline_001_pos.ksh \ functional/online_offline/online_offline_002_neg.ksh \ functional/online_offline/online_offline_003_neg.ksh \ functional/online_offline/setup.ksh \ functional/pam/cleanup.ksh \ functional/pam/pam_basic.ksh \ functional/pam/pam_change_unmounted.ksh \ functional/pam/pam_nounmount.ksh \ functional/pam/pam_recursive.ksh \ functional/pam/pam_short_password.ksh \ functional/pam/setup.ksh \ functional/pool_checkpoint/checkpoint_after_rewind.ksh \ functional/pool_checkpoint/checkpoint_big_rewind.ksh \ functional/pool_checkpoint/checkpoint_capacity.ksh \ functional/pool_checkpoint/checkpoint_conf_change.ksh \ functional/pool_checkpoint/checkpoint_discard_busy.ksh \ functional/pool_checkpoint/checkpoint_discard.ksh \ functional/pool_checkpoint/checkpoint_discard_many.ksh \ functional/pool_checkpoint/checkpoint_indirect.ksh \ functional/pool_checkpoint/checkpoint_invalid.ksh \ functional/pool_checkpoint/checkpoint_lun_expsz.ksh \ functional/pool_checkpoint/checkpoint_open.ksh \ functional/pool_checkpoint/checkpoint_removal.ksh \ functional/pool_checkpoint/checkpoint_rewind.ksh \ functional/pool_checkpoint/checkpoint_ro_rewind.ksh \ functional/pool_checkpoint/checkpoint_sm_scale.ksh \ functional/pool_checkpoint/checkpoint_twice.ksh \ functional/pool_checkpoint/checkpoint_vdev_add.ksh \ functional/pool_checkpoint/checkpoint_zdb.ksh \ functional/pool_checkpoint/checkpoint_zhack_feat.ksh \ functional/pool_checkpoint/cleanup.ksh \ functional/pool_checkpoint/setup.ksh \ functional/pool_names/pool_names_001_pos.ksh \ functional/pool_names/pool_names_002_neg.ksh \ functional/poolversion/cleanup.ksh \ functional/poolversion/poolversion_001_pos.ksh \ functional/poolversion/poolversion_002_pos.ksh \ functional/poolversion/setup.ksh \ functional/privilege/cleanup.ksh \ functional/privilege/privilege_001_pos.ksh \ functional/privilege/privilege_002_pos.ksh \ functional/privilege/setup.ksh \ functional/procfs/cleanup.ksh \ functional/procfs/pool_state.ksh \ functional/procfs/procfs_list_basic.ksh \ functional/procfs/procfs_list_concurrent_readers.ksh \ functional/procfs/procfs_list_stale_read.ksh \ functional/procfs/setup.ksh \ functional/projectquota/cleanup.ksh \ functional/projectquota/projectid_001_pos.ksh \ functional/projectquota/projectid_002_pos.ksh \ functional/projectquota/projectid_003_pos.ksh \ functional/projectquota/projectquota_001_pos.ksh \ functional/projectquota/projectquota_002_pos.ksh \ functional/projectquota/projectquota_003_pos.ksh \ functional/projectquota/projectquota_004_neg.ksh \ functional/projectquota/projectquota_005_pos.ksh \ functional/projectquota/projectquota_006_pos.ksh \ functional/projectquota/projectquota_007_pos.ksh \ functional/projectquota/projectquota_008_pos.ksh \ functional/projectquota/projectquota_009_pos.ksh \ functional/projectquota/projectspace_001_pos.ksh \ functional/projectquota/projectspace_002_pos.ksh \ functional/projectquota/projectspace_003_pos.ksh \ functional/projectquota/projectspace_004_pos.ksh \ functional/projectquota/projecttree_001_pos.ksh \ functional/projectquota/projecttree_002_pos.ksh \ functional/projectquota/projecttree_003_neg.ksh \ functional/projectquota/setup.ksh \ functional/quota/cleanup.ksh \ functional/quota/quota_001_pos.ksh \ functional/quota/quota_002_pos.ksh \ functional/quota/quota_003_pos.ksh \ functional/quota/quota_004_pos.ksh \ functional/quota/quota_005_pos.ksh \ functional/quota/quota_006_neg.ksh \ functional/quota/setup.ksh \ functional/raidz/cleanup.ksh \ functional/raidz/raidz_001_neg.ksh \ functional/raidz/raidz_002_pos.ksh \ functional/raidz/raidz_expand_001_pos.ksh \ functional/raidz/raidz_expand_002_pos.ksh \ functional/raidz/raidz_expand_003_neg.ksh \ functional/raidz/raidz_expand_003_pos.ksh \ functional/raidz/raidz_expand_004_pos.ksh \ functional/raidz/raidz_expand_005_pos.ksh \ functional/raidz/raidz_expand_006_neg.ksh \ functional/raidz/raidz_expand_007_neg.ksh \ functional/raidz/setup.ksh \ functional/redacted_send/cleanup.ksh \ functional/redacted_send/redacted_compressed.ksh \ functional/redacted_send/redacted_contents.ksh \ functional/redacted_send/redacted_deleted.ksh \ functional/redacted_send/redacted_disabled_feature.ksh \ functional/redacted_send/redacted_embedded.ksh \ functional/redacted_send/redacted_holes.ksh \ functional/redacted_send/redacted_incrementals.ksh \ functional/redacted_send/redacted_largeblocks.ksh \ functional/redacted_send/redacted_many_clones.ksh \ functional/redacted_send/redacted_mixed_recsize.ksh \ functional/redacted_send/redacted_mounts.ksh \ functional/redacted_send/redacted_negative.ksh \ functional/redacted_send/redacted_origin.ksh \ functional/redacted_send/redacted_panic.ksh \ functional/redacted_send/redacted_props.ksh \ functional/redacted_send/redacted_resume.ksh \ functional/redacted_send/redacted_size.ksh \ functional/redacted_send/redacted_volume.ksh \ functional/redacted_send/setup.ksh \ functional/redundancy/cleanup.ksh \ functional/redundancy/redundancy_draid1.ksh \ functional/redundancy/redundancy_draid2.ksh \ functional/redundancy/redundancy_draid3.ksh \ functional/redundancy/redundancy_draid_damaged1.ksh \ functional/redundancy/redundancy_draid_damaged2.ksh \ functional/redundancy/redundancy_draid.ksh \ functional/redundancy/redundancy_draid_spare1.ksh \ functional/redundancy/redundancy_draid_spare2.ksh \ functional/redundancy/redundancy_draid_spare3.ksh \ functional/redundancy/redundancy_mirror.ksh \ functional/redundancy/redundancy_raidz1.ksh \ functional/redundancy/redundancy_raidz2.ksh \ functional/redundancy/redundancy_raidz3.ksh \ functional/redundancy/redundancy_raidz.ksh \ functional/redundancy/redundancy_stripe.ksh \ functional/redundancy/setup.ksh \ functional/refquota/cleanup.ksh \ functional/refquota/refquota_001_pos.ksh \ functional/refquota/refquota_002_pos.ksh \ functional/refquota/refquota_003_pos.ksh \ functional/refquota/refquota_004_pos.ksh \ functional/refquota/refquota_005_pos.ksh \ functional/refquota/refquota_006_neg.ksh \ functional/refquota/refquota_007_neg.ksh \ functional/refquota/refquota_008_neg.ksh \ functional/refquota/setup.ksh \ functional/refreserv/cleanup.ksh \ functional/refreserv/refreserv_001_pos.ksh \ functional/refreserv/refreserv_002_pos.ksh \ functional/refreserv/refreserv_003_pos.ksh \ functional/refreserv/refreserv_004_pos.ksh \ functional/refreserv/refreserv_005_pos.ksh \ functional/refreserv/refreserv_multi_raidz.ksh \ functional/refreserv/refreserv_raidz.ksh \ functional/refreserv/setup.ksh \ functional/removal/cleanup.ksh \ functional/removal/removal_all_vdev.ksh \ functional/removal/removal_cancel.ksh \ functional/removal/removal_check_space.ksh \ functional/removal/removal_condense_export.ksh \ functional/removal/removal_multiple_indirection.ksh \ functional/removal/removal_nopwrite.ksh \ functional/removal/removal_remap_deadlists.ksh \ functional/removal/removal_reservation.ksh \ functional/removal/removal_resume_export.ksh \ functional/removal/removal_sanity.ksh \ functional/removal/removal_with_add.ksh \ functional/removal/removal_with_create_fs.ksh \ functional/removal/removal_with_dedup.ksh \ functional/removal/removal_with_errors.ksh \ functional/removal/removal_with_export.ksh \ functional/removal/removal_with_faulted.ksh \ functional/removal/removal_with_ganging.ksh \ functional/removal/removal_with_indirect.ksh \ functional/removal/removal_with_remove.ksh \ functional/removal/removal_with_scrub.ksh \ functional/removal/removal_with_send.ksh \ functional/removal/removal_with_send_recv.ksh \ functional/removal/removal_with_snapshot.ksh \ functional/removal/removal_with_write.ksh \ functional/removal/removal_with_zdb.ksh \ functional/removal/remove_attach_mirror.ksh \ functional/removal/remove_expanded.ksh \ functional/removal/remove_indirect.ksh \ functional/removal/remove_mirror.ksh \ functional/removal/remove_mirror_sanity.ksh \ functional/removal/remove_raidz.ksh \ functional/rename_dirs/cleanup.ksh \ functional/rename_dirs/rename_dirs_001_pos.ksh \ functional/rename_dirs/setup.ksh \ functional/renameat2/cleanup.ksh \ functional/renameat2/setup.ksh \ functional/renameat2/renameat2_exchange.ksh \ functional/renameat2/renameat2_noreplace.ksh \ functional/renameat2/renameat2_whiteout.ksh \ functional/replacement/attach_import.ksh \ functional/replacement/attach_multiple.ksh \ functional/replacement/attach_rebuild.ksh \ functional/replacement/attach_resilver.ksh \ functional/replacement/cleanup.ksh \ functional/replacement/detach.ksh \ functional/replacement/rebuild_disabled_feature.ksh \ functional/replacement/rebuild_multiple.ksh \ functional/replacement/rebuild_raidz.ksh \ functional/replacement/replace_import.ksh \ functional/replacement/replace_rebuild.ksh \ functional/replacement/replace_resilver.ksh \ functional/replacement/resilver_restart_001.ksh \ functional/replacement/resilver_restart_002.ksh \ functional/replacement/scrub_cancel.ksh \ functional/replacement/setup.ksh \ functional/reservation/cleanup.ksh \ functional/reservation/reservation_001_pos.ksh \ functional/reservation/reservation_002_pos.ksh \ functional/reservation/reservation_003_pos.ksh \ functional/reservation/reservation_004_pos.ksh \ functional/reservation/reservation_005_pos.ksh \ functional/reservation/reservation_006_pos.ksh \ functional/reservation/reservation_007_pos.ksh \ functional/reservation/reservation_008_pos.ksh \ functional/reservation/reservation_009_pos.ksh \ functional/reservation/reservation_010_pos.ksh \ functional/reservation/reservation_011_pos.ksh \ functional/reservation/reservation_012_pos.ksh \ functional/reservation/reservation_013_pos.ksh \ functional/reservation/reservation_014_pos.ksh \ functional/reservation/reservation_015_pos.ksh \ functional/reservation/reservation_016_pos.ksh \ functional/reservation/reservation_017_pos.ksh \ functional/reservation/reservation_018_pos.ksh \ functional/reservation/reservation_019_pos.ksh \ functional/reservation/reservation_020_pos.ksh \ functional/reservation/reservation_021_neg.ksh \ functional/reservation/reservation_022_pos.ksh \ functional/reservation/setup.ksh \ functional/rootpool/cleanup.ksh \ functional/rootpool/rootpool_002_neg.ksh \ functional/rootpool/rootpool_003_neg.ksh \ functional/rootpool/rootpool_007_pos.ksh \ functional/rootpool/setup.ksh \ functional/rsend/cleanup.ksh \ functional/rsend/recv_dedup_encrypted_zvol.ksh \ functional/rsend/recv_dedup.ksh \ functional/rsend/rsend_001_pos.ksh \ functional/rsend/rsend_002_pos.ksh \ functional/rsend/rsend_003_pos.ksh \ functional/rsend/rsend_004_pos.ksh \ functional/rsend/rsend_005_pos.ksh \ functional/rsend/rsend_006_pos.ksh \ functional/rsend/rsend_007_pos.ksh \ functional/rsend/rsend_008_pos.ksh \ functional/rsend/rsend_009_pos.ksh \ functional/rsend/rsend_010_pos.ksh \ functional/rsend/rsend_011_pos.ksh \ functional/rsend/rsend_012_pos.ksh \ functional/rsend/rsend_013_pos.ksh \ functional/rsend/rsend_014_pos.ksh \ functional/rsend/rsend_016_neg.ksh \ functional/rsend/rsend_019_pos.ksh \ functional/rsend/rsend_020_pos.ksh \ functional/rsend/rsend_021_pos.ksh \ functional/rsend/rsend_022_pos.ksh \ functional/rsend/rsend_024_pos.ksh \ functional/rsend/rsend_025_pos.ksh \ functional/rsend/rsend_026_neg.ksh \ functional/rsend/rsend_027_pos.ksh \ functional/rsend/rsend_028_neg.ksh \ functional/rsend/rsend_029_neg.ksh \ functional/rsend/rsend_030_pos.ksh \ functional/rsend/rsend_031_pos.ksh \ functional/rsend/send-c_embedded_blocks.ksh \ functional/rsend/send-c_incremental.ksh \ functional/rsend/send-c_lz4_disabled.ksh \ functional/rsend/send-c_mixed_compression.ksh \ functional/rsend/send-c_props.ksh \ functional/rsend/send-c_recv_dedup.ksh \ functional/rsend/send-c_recv_lz4_disabled.ksh \ functional/rsend/send-c_resume.ksh \ functional/rsend/send-c_stream_size_estimate.ksh \ functional/rsend/send-c_verify_contents.ksh \ functional/rsend/send-c_verify_ratio.ksh \ functional/rsend/send-c_volume.ksh \ functional/rsend/send-c_zstream_recompress.ksh \ functional/rsend/send-c_zstreamdump.ksh \ functional/rsend/send-cpL_varied_recsize.ksh \ functional/rsend/send_doall.ksh \ functional/rsend/send_encrypted_incremental.ksh \ functional/rsend/send_encrypted_files.ksh \ functional/rsend/send_encrypted_freeobjects.ksh \ functional/rsend/send_encrypted_hierarchy.ksh \ functional/rsend/send_encrypted_props.ksh \ functional/rsend/send_encrypted_truncated_files.ksh \ functional/rsend/send_freeobjects.ksh \ functional/rsend/send_holds.ksh \ functional/rsend/send_hole_birth.ksh \ functional/rsend/send_invalid.ksh \ functional/rsend/send-L_toggle.ksh \ functional/rsend/send_mixed_raw.ksh \ functional/rsend/send_partial_dataset.ksh \ functional/rsend/send_raw_ashift.ksh \ functional/rsend/send_raw_spill_block.ksh \ functional/rsend/send_raw_large_blocks.ksh \ functional/rsend/send_realloc_dnode_size.ksh \ functional/rsend/send_realloc_encrypted_files.ksh \ functional/rsend/send_realloc_files.ksh \ functional/rsend/send_spill_block.ksh \ functional/rsend/send-wR_encrypted_zvol.ksh \ functional/rsend/setup.ksh \ functional/scrub_mirror/cleanup.ksh \ functional/scrub_mirror/scrub_mirror_001_pos.ksh \ functional/scrub_mirror/scrub_mirror_002_pos.ksh \ functional/scrub_mirror/scrub_mirror_003_pos.ksh \ functional/scrub_mirror/scrub_mirror_004_pos.ksh \ functional/scrub_mirror/setup.ksh \ functional/slog/cleanup.ksh \ functional/slog/setup.ksh \ functional/slog/slog_001_pos.ksh \ functional/slog/slog_002_pos.ksh \ functional/slog/slog_003_pos.ksh \ functional/slog/slog_004_pos.ksh \ functional/slog/slog_005_pos.ksh \ functional/slog/slog_006_pos.ksh \ functional/slog/slog_007_pos.ksh \ functional/slog/slog_008_neg.ksh \ functional/slog/slog_009_neg.ksh \ functional/slog/slog_010_neg.ksh \ functional/slog/slog_011_neg.ksh \ functional/slog/slog_012_neg.ksh \ functional/slog/slog_013_pos.ksh \ functional/slog/slog_014_pos.ksh \ functional/slog/slog_015_neg.ksh \ functional/slog/slog_016_pos.ksh \ functional/slog/slog_replay_fs_001.ksh \ functional/slog/slog_replay_fs_002.ksh \ functional/slog/slog_replay_volume.ksh \ functional/snapshot/cleanup.ksh \ functional/snapshot/clone_001_pos.ksh \ functional/snapshot/rollback_001_pos.ksh \ functional/snapshot/rollback_002_pos.ksh \ functional/snapshot/rollback_003_pos.ksh \ functional/snapshot/setup.ksh \ functional/snapshot/snapshot_001_pos.ksh \ functional/snapshot/snapshot_002_pos.ksh \ functional/snapshot/snapshot_003_pos.ksh \ functional/snapshot/snapshot_004_pos.ksh \ functional/snapshot/snapshot_005_pos.ksh \ functional/snapshot/snapshot_006_pos.ksh \ functional/snapshot/snapshot_007_pos.ksh \ functional/snapshot/snapshot_008_pos.ksh \ functional/snapshot/snapshot_009_pos.ksh \ functional/snapshot/snapshot_010_pos.ksh \ functional/snapshot/snapshot_011_pos.ksh \ functional/snapshot/snapshot_012_pos.ksh \ functional/snapshot/snapshot_013_pos.ksh \ functional/snapshot/snapshot_014_pos.ksh \ functional/snapshot/snapshot_015_pos.ksh \ functional/snapshot/snapshot_016_pos.ksh \ functional/snapshot/snapshot_017_pos.ksh \ functional/snapshot/snapshot_018_pos.ksh \ functional/snapused/cleanup.ksh \ functional/snapused/setup.ksh \ functional/snapused/snapused_001_pos.ksh \ functional/snapused/snapused_002_pos.ksh \ functional/snapused/snapused_003_pos.ksh \ functional/snapused/snapused_004_pos.ksh \ functional/snapused/snapused_005_pos.ksh \ functional/sparse/cleanup.ksh \ functional/sparse/setup.ksh \ functional/sparse/sparse_001_pos.ksh \ functional/stat/cleanup.ksh \ functional/stat/setup.ksh \ functional/stat/stat_001_pos.ksh \ functional/suid/cleanup.ksh \ functional/suid/setup.ksh \ functional/suid/suid_write_to_none.ksh \ functional/suid/suid_write_to_sgid.ksh \ functional/suid/suid_write_to_suid.ksh \ functional/suid/suid_write_to_suid_sgid.ksh \ functional/suid/suid_write_zil_replay.ksh \ functional/trim/autotrim_config.ksh \ functional/trim/autotrim_integrity.ksh \ functional/trim/autotrim_trim_integrity.ksh \ functional/trim/cleanup.ksh \ functional/trim/setup.ksh \ functional/trim/trim_config.ksh \ functional/trim/trim_integrity.ksh \ functional/trim/trim_l2arc.ksh \ functional/truncate/cleanup.ksh \ functional/truncate/setup.ksh \ functional/truncate/truncate_001_pos.ksh \ functional/truncate/truncate_002_pos.ksh \ functional/truncate/truncate_timestamps.ksh \ functional/upgrade/cleanup.ksh \ functional/upgrade/setup.ksh \ functional/upgrade/upgrade_projectquota_001_pos.ksh \ functional/upgrade/upgrade_readonly_pool.ksh \ functional/upgrade/upgrade_userobj_001_pos.ksh \ functional/user_namespace/cleanup.ksh \ functional/user_namespace/setup.ksh \ functional/user_namespace/user_namespace_001.ksh \ functional/user_namespace/user_namespace_002.ksh \ functional/user_namespace/user_namespace_003.ksh \ functional/user_namespace/user_namespace_004.ksh \ functional/userquota/cleanup.ksh \ functional/userquota/groupspace_001_pos.ksh \ functional/userquota/groupspace_002_pos.ksh \ functional/userquota/groupspace_003_pos.ksh \ functional/userquota/setup.ksh \ functional/userquota/userquota_001_pos.ksh \ functional/userquota/userquota_002_pos.ksh \ functional/userquota/userquota_003_pos.ksh \ functional/userquota/userquota_004_pos.ksh \ functional/userquota/userquota_005_neg.ksh \ functional/userquota/userquota_006_pos.ksh \ functional/userquota/userquota_007_pos.ksh \ functional/userquota/userquota_008_pos.ksh \ functional/userquota/userquota_009_pos.ksh \ functional/userquota/userquota_010_pos.ksh \ functional/userquota/userquota_011_pos.ksh \ functional/userquota/userquota_012_neg.ksh \ functional/userquota/userquota_013_pos.ksh \ functional/userquota/userspace_001_pos.ksh \ functional/userquota/userspace_002_pos.ksh \ functional/userquota/userspace_003_pos.ksh \ functional/userquota/userspace_encrypted.ksh \ functional/userquota/userspace_send_encrypted.ksh \ functional/userquota/userspace_encrypted_13709.ksh \ functional/vdev_zaps/cleanup.ksh \ functional/vdev_zaps/setup.ksh \ functional/vdev_zaps/vdev_zaps_001_pos.ksh \ functional/vdev_zaps/vdev_zaps_002_pos.ksh \ functional/vdev_zaps/vdev_zaps_003_pos.ksh \ functional/vdev_zaps/vdev_zaps_004_pos.ksh \ functional/vdev_zaps/vdev_zaps_005_pos.ksh \ functional/vdev_zaps/vdev_zaps_006_pos.ksh \ functional/vdev_zaps/vdev_zaps_007_pos.ksh \ functional/write_dirs/cleanup.ksh \ functional/write_dirs/setup.ksh \ functional/write_dirs/write_dirs_001_pos.ksh \ functional/write_dirs/write_dirs_002_pos.ksh \ functional/xattr/cleanup.ksh \ functional/xattr/setup.ksh \ functional/xattr/xattr_001_pos.ksh \ functional/xattr/xattr_002_neg.ksh \ functional/xattr/xattr_003_neg.ksh \ functional/xattr/xattr_004_pos.ksh \ functional/xattr/xattr_005_pos.ksh \ functional/xattr/xattr_006_pos.ksh \ functional/xattr/xattr_007_neg.ksh \ functional/xattr/xattr_008_pos.ksh \ functional/xattr/xattr_009_neg.ksh \ functional/xattr/xattr_010_neg.ksh \ functional/xattr/xattr_011_pos.ksh \ functional/xattr/xattr_012_pos.ksh \ functional/xattr/xattr_013_pos.ksh \ functional/xattr/xattr_compat.ksh \ functional/zap_shrink/cleanup.ksh \ functional/zap_shrink/zap_shrink_001_pos.ksh \ functional/zap_shrink/setup.ksh \ functional/zpool_influxdb/cleanup.ksh \ functional/zpool_influxdb/setup.ksh \ functional/zpool_influxdb/zpool_influxdb.ksh \ functional/zvol/zvol_cli/cleanup.ksh \ functional/zvol/zvol_cli/setup.ksh \ functional/zvol/zvol_cli/zvol_cli_001_pos.ksh \ functional/zvol/zvol_cli/zvol_cli_002_pos.ksh \ functional/zvol/zvol_cli/zvol_cli_003_neg.ksh \ functional/zvol/zvol_ENOSPC/cleanup.ksh \ functional/zvol/zvol_ENOSPC/setup.ksh \ functional/zvol/zvol_ENOSPC/zvol_ENOSPC_001_pos.ksh \ functional/zvol/zvol_misc/cleanup.ksh \ functional/zvol/zvol_misc/setup.ksh \ functional/zvol/zvol_misc/zvol_misc_001_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_002_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_003_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_004_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_005_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_006_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_fua.ksh \ functional/zvol/zvol_misc/zvol_misc_hierarchy.ksh \ functional/zvol/zvol_misc/zvol_misc_rename_inuse.ksh \ functional/zvol/zvol_misc/zvol_misc_snapdev.ksh \ functional/zvol/zvol_misc/zvol_misc_trim.ksh \ functional/zvol/zvol_misc/zvol_misc_volmode.ksh \ functional/zvol/zvol_misc/zvol_misc_zil.ksh \ functional/zvol/zvol_stress/cleanup.ksh \ functional/zvol/zvol_stress/setup.ksh \ functional/zvol/zvol_stress/zvol_stress.ksh \ functional/zvol/zvol_swap/cleanup.ksh \ functional/zvol/zvol_swap/setup.ksh \ functional/zvol/zvol_swap/zvol_swap_001_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_002_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_003_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_004_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_005_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_006_pos.ksh \ functional/idmap_mount/cleanup.ksh \ functional/idmap_mount/setup.ksh \ functional/idmap_mount/idmap_mount_001.ksh \ functional/idmap_mount/idmap_mount_002.ksh \ functional/idmap_mount/idmap_mount_003.ksh \ functional/idmap_mount/idmap_mount_004.ksh \ functional/idmap_mount/idmap_mount_005.ksh diff --git a/tests/zfs-tests/tests/functional/cli_root/zpool_get/zpool_get.cfg b/tests/zfs-tests/tests/functional/cli_root/zpool_get/zpool_get.cfg index 6ebce9459190..e8a94ce209bc 100644 --- a/tests/zfs-tests/tests/functional/cli_root/zpool_get/zpool_get.cfg +++ b/tests/zfs-tests/tests/functional/cli_root/zpool_get/zpool_get.cfg @@ -1,111 +1,113 @@ # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or https://opensource.org/licenses/CDDL-1.0. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2009 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # # Copyright (c) 2013, 2014 by Delphix. All rights reserved. # Copyright 2016 Nexenta Systems, Inc. All rights reserved. # # Set the expected properties of zpool typeset -a properties=( "size" "capacity" "altroot" "health" "guid" "load_guid" "version" "bootfs" "delegation" "autoreplace" "cachefile" "checkpoint" "failmode" "listsnapshots" "autoexpand" "dedupratio" + "dedup_table_quota" + "dedup_table_size" "free" "allocated" "readonly" "comment" "expandsize" "freeing" "fragmentation" "leaked" "multihost" "autotrim" "compatibility" "bcloneused" "bclonesaved" "bcloneratio" "feature@async_destroy" "feature@empty_bpobj" "feature@lz4_compress" "feature@multi_vdev_crash_dump" "feature@spacemap_histogram" "feature@enabled_txg" "feature@hole_birth" "feature@extensible_dataset" "feature@embedded_data" "feature@bookmarks" "feature@filesystem_limits" "feature@large_blocks" "feature@sha512" "feature@skein" "feature@edonr" "feature@device_removal" "feature@obsolete_counts" "feature@zpool_checkpoint" "feature@spacemap_v2" "feature@redaction_bookmarks" "feature@redacted_datasets" "feature@bookmark_written" "feature@log_spacemap" "feature@device_rebuild" "feature@draid" "feature@redaction_list_spill" ) if is_linux || is_freebsd; then properties+=( "ashift" "feature@large_dnode" "feature@userobj_accounting" "feature@encryption" "feature@project_quota" "feature@allocation_classes" "feature@resilver_defer" "feature@bookmark_v2" "feature@livelist" "feature@zstd_compress" "feature@zilsaxattr" "feature@head_errlog" "feature@blake3" "feature@block_cloning" "feature@vdev_zaps_v2" "feature@raidz_expansion" ) fi diff --git a/tests/zfs-tests/tests/functional/dedup/cleanup.ksh b/tests/zfs-tests/tests/functional/dedup/cleanup.ksh new file mode 100755 index 000000000000..b3c4c04d7761 --- /dev/null +++ b/tests/zfs-tests/tests/functional/dedup/cleanup.ksh @@ -0,0 +1,29 @@ +#!/bin/ksh -p +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or https://opensource.org/licenses/CDDL-1.0. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# + +# +# Copyright (c) 2017 by Lawrence Livermore National Security, LLC. +# + +. $STF_SUITE/include/libtest.shlib + +default_cleanup diff --git a/tests/zfs-tests/tests/functional/dedup/dedup_quota.ksh b/tests/zfs-tests/tests/functional/dedup/dedup_quota.ksh new file mode 100755 index 000000000000..5b83a1ca396f --- /dev/null +++ b/tests/zfs-tests/tests/functional/dedup/dedup_quota.ksh @@ -0,0 +1,223 @@ +#!/bin/ksh -p +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or https://opensource.org/licenses/CDDL-1.0. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# + +# +# Copyright (c) 2023, Klara Inc. +# + +# DESCRIPTION: +# Verify that new entries are not added to the DDT when dedup_table_quota has +# been exceeded. +# +# STRATEGY: +# 1. Create a pool with dedup=on +# 2. Set threshold for on-disk DDT via dedup_table_quota +# 3. Verify the threshold is exceeded after zpool sync +# 4. Verify no new entries are added after subsequent sync's +# 5. Remove all but one entry from DDT +# 6. Verify new entries are added to DDT +# + +. $STF_SUITE/include/libtest.shlib +. $STF_SUITE/tests/functional/events/events_common.kshlib + +verify_runnable "both" + +log_assert "DDT quota is enforced" + +MOUNTDIR="$TEST_BASE_DIR/dedup_mount" +FILEPATH="$MOUNTDIR/dedup_file" +VDEV_GENERAL="$TEST_BASE_DIR/vdevfile.general.$$" +VDEV_DEDUP="$TEST_BASE_DIR/vdevfile.dedup.$$" +POOL="dedup_pool" + +save_tunable TXG_TIMEOUT + +function cleanup +{ + if poolexists $POOL ; then + destroy_pool $POOL + fi + log_must rm -fd $VDEV_GENERAL $VDEV_DEDUP $MOUNTDIR + log_must restore_tunable TXG_TIMEOUT +} + + +function do_clean +{ + log_must destroy_pool $POOL + log_must rm -fd $VDEV_GENERAL $VDEV_DEDUP $MOUNTDIR +} + +function do_setup +{ + log_must truncate -s 5G $VDEV_GENERAL + # Use 'xattr=sa' to prevent selinux xattrs influencing our accounting + log_must zpool create -o ashift=12 -f -O xattr=sa -m $MOUNTDIR $POOL $VDEV_GENERAL + log_must zfs set dedup=on $POOL + log_must set_tunable32 TXG_TIMEOUT 600 +} + +function dedup_table_size +{ + get_pool_prop dedup_table_size $POOL +} + +function dedup_table_quota +{ + get_pool_prop dedup_table_quota $POOL +} + +function ddt_entries +{ + typeset -i entries=$(zpool status -D $POOL | \ + grep "dedup: DDT entries" | awk '{print $4}') + + echo ${entries} +} + +function ddt_add_entry +{ + count=$1 + offset=$2 + expand=$3 + + if [ -z "$offset" ]; then + offset=1 + fi + + for i in {$offset..$count}; do + echo "$i" > $MOUNTDIR/dedup-$i.txt + done + log_must sync_pool $POOL + + log_note range $offset - $(( count + offset - 1 )) + log_note ddt_add_entry got $(ddt_entries) +} + +# Create 6000 entries over three syncs +function ddt_nolimit +{ + do_setup + + log_note base ddt entries is $(ddt_entries) + + ddt_add_entry 1 + ddt_add_entry 100 + ddt_add_entry 101 5000 + ddt_add_entry 5001 6000 + + log_must test $(ddt_entries) -eq 6000 + + do_clean +} + +function ddt_limit +{ + do_setup + + log_note base ddt entries is $(ddt_entries) + + log_must zpool set dedup_table_quota=32768 $POOL + ddt_add_entry 100 + + # it's possible to exceed dedup_table_quota over a single transaction, + # ensure that the threshold has been exceeded + cursize=$(dedup_table_size) + log_must test $cursize -gt $(dedup_table_quota) + + # count the entries we have + log_must test $(ddt_entries) -ge 100 + + # attempt to add new entries + ddt_add_entry 101 200 + log_must test $(ddt_entries) -eq 100 + log_must test $cursize -eq $(dedup_table_size) + + # remove all but one entry + for i in {2..100}; do + rm $MOUNTDIR/dedup-$i.txt + done + log_must sync_pool $POOL + + log_must test $(ddt_entries) -eq 1 + log_must test $cursize -gt $(dedup_table_size) + cursize=$(dedup_table_size) + + log_must zpool set dedup_table_quota=none $POOL + + # create more entries + zpool status -D $POOL + ddt_add_entry 101 200 + log_must sync_pool $POOL + + log_must test $(ddt_entries) -eq 101 + log_must test $cursize -lt $(dedup_table_size) + + do_clean +} + +function ddt_dedup_vdev_limit +{ + do_setup + + # add a dedicated dedup/special VDEV and enable an automatic quota + if (( RANDOM % 2 == 0 )) ; then + class="special" + else + class="dedup" + fi + log_must truncate -s 200M $VDEV_DEDUP + log_must zpool add $POOL $class $VDEV_DEDUP + log_must zpool set dedup_table_quota=auto $POOL + + log_must zfs set recordsize=1K $POOL + log_must zfs set compression=zstd $POOL + + # Generate a working set to fill up the dedup/special allocation class + log_must fio --directory=$MOUNTDIR --name=dedup-filler-1 \ + --rw=read --bs=1m --numjobs=2 --iodepth=8 \ + --size=512M --end_fsync=1 --ioengine=posixaio --runtime=1 \ + --group_reporting --fallocate=none --output-format=terse \ + --dedupe_percentage=0 + log_must sync_pool $POOL + + zpool status -D $POOL + zpool list -v $POOL + echo DDT size $(dedup_table_size), with $(ddt_entries) entries + + # + # With no DDT quota in place, the above workload will produce over + # 800,000 entries by using space in the normal class. With a quota, + # it will be well below 500,000 entries. + # + log_must test $(ddt_entries) -le 500000 + + do_clean +} + +log_onexit cleanup + +ddt_limit +ddt_nolimit +ddt_dedup_vdev_limit + +log_pass "DDT quota is enforced" diff --git a/tests/zfs-tests/tests/functional/dedup/setup.ksh b/tests/zfs-tests/tests/functional/dedup/setup.ksh new file mode 100755 index 000000000000..3c0830401f81 --- /dev/null +++ b/tests/zfs-tests/tests/functional/dedup/setup.ksh @@ -0,0 +1,31 @@ +#!/bin/ksh -p +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or https://opensource.org/licenses/CDDL-1.0. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# + +# +# Copyright (c) 2017 by Lawrence Livermore National Security, LLC. +# + +. $STF_SUITE/include/libtest.shlib + +DISK=${DISKS%% *} + +default_setup $DISK