diff --git a/sbin/md5/md5.1 b/sbin/md5/md5.1 index 04f13339e533..da034d1298c5 100644 --- a/sbin/md5/md5.1 +++ b/sbin/md5/md5.1 @@ -1,214 +1,249 @@ .\" $FreeBSD$ -.Dd June 19, 2021 +.Dd June 24, 2021 .Dt MD5 1 .Os .Sh NAME .Nm md5 , sha1 , sha224 , sha256 , sha384 , sha512 , sha512t256 , rmd160 , .Nm skein256 , skein512 , skein1024 , .Nm md5sum , sha1sum , sha224sum , sha256sum , sha384sum , sha512sum , .Nm sha512t256sum , rmd160sum , skein256sum , skein512sum , skein1024sum .Nd calculate a message-digest fingerprint (checksum) for a file .Sh SYNOPSIS .Nm .Op Fl pqrtx .Op Fl c Ar string .Op Fl s Ar string .Op Ar +.Pp .Nm md5sum .Op Fl pqrtx .Op Fl c Ar file .Op Fl s Ar string .Op Ar .Pp (All other hashes have the same options and usage.) .Sh DESCRIPTION The .Nm md5 , sha1 , sha224 , sha256 , sha384 , sha512 , sha512t256 , rmd160 , .Nm skein256 , skein512 , and .Nm skein1024 utilities take as input a message of arbitrary length and produce as output a .Dq fingerprint or .Dq message digest of the input. The .Nm md5sum , sha1sum , sha224sum , sha256sum , sha384sum , sha512sum , .Nm sha512t256sum , rmd160sum , skein256sum , skein512sum , and .Nm skein1024sum utilities do the same, but default to the reversed format of the .Fl r flag. It is conjectured that it is computationally infeasible to produce two messages having the same message digest, or to produce any message having a given prespecified target message digest. The SHA-224 , SHA-256 , SHA-384 , SHA-512, RIPEMD-160, and SKEIN algorithms are intended for digital signature applications, where a large file must be .Dq compressed in a secure manner before being encrypted with a private (secret) key under a public-key cryptosystem such as RSA. .Pp The MD5 and SHA-1 algorithms have been proven to be vulnerable to practical collision attacks and should not be relied upon to produce unique outputs, .Em nor should they be used as part of a cryptographic signature scheme. As of 2017-03-02, there is no publicly known method to .Em reverse either algorithm, i.e., to find an input that produces a specific output. .Pp SHA-512t256 is a version of SHA-512 truncated to only 256 bits. On 64-bit hardware, this algorithm is approximately 50% faster than SHA-256 but with the same level of security. The hashes are not interchangeable. .Pp It is recommended that all new applications use SHA-512 or SKEIN-512 instead of one of the other hash functions. .Pp The following options may be used in any combination and must precede any files named on the command line. The hexadecimal checksum of each file listed on the command line is printed after the options are processed. .Bl -tag -width indent .It Fl b Ignored for compatibility with the coreutils .Nm -sum programs. .It Fl c Ar string -Compare the digest of the file against this string. +If the program was called with a name that does not end in +.Nm sum , +compare the digest of the file against this string. .Pq Note that this option is not yet useful if multiple files are specified. -This option causes an error in for the -.Nm -sum -programs because it check the checksums listed in a file for the coreutils -.Nm -sum -programs that is not yet implemented. +.It Fl c Ar file +If the program was called with a name that does end in +.Nm sum , +the file passed as argument must contain digest lines generated by the same digest algorithm +with or without the +.Fl r +option +.Pq i.e. in either classical BSD format or in GNU coreutils format . +A line with file name followed by +.Dq : +and either OK or FAILED is written for each well-formed line in the digest file. +If applicable, the number of failed comparisons and the number of lines that were +skipped since they were not well-formed are printed at the end. +The +.Fl q +option can be used to quiesce the output unless there are mismatched entries in +the digest. +.Pp .It Fl s Ar string Print a checksum of the given .Ar string . .It Fl p Echo stdin to stdout and append the checksum to stdout. .It Fl q Quiet mode \(em only the checksum is printed out. Overrides the .Fl r option. .It Fl r Reverses the format of the output. This helps with visual diffs. Does nothing when combined with the .Fl ptx options. .It Fl t Run a built-in time trial. For the .Nm -sum versions, this is a nop for compatibility with coreutils. .It Fl x Run a built-in test script. .El .Sh EXIT STATUS The .Nm md5 , sha1 , sha224 , sha256 , sha512 , sha512t256 , rmd160 , .Nm skein256 , skein512 , and .Nm skein1024 utilities exit 0 on success, 1 if at least one of the input files could not be read, and 2 if at least one file does not have the same hash as the .Fl c option. .Sh EXAMPLES Calculate the MD5 checksum of the string .Dq Hello . .Bd -literal -offset indent $ md5 -s Hello MD5 ("Hello") = 8b1a9953c4611296a827abf8c47804d7 .Ed .Pp Same as above, but note the absence of the newline character in the input string: .Bd -literal -offset indent $ echo -n Hello | md5 8b1a9953c4611296a827abf8c47804d7 .Ed .Pp Calculate the checksum of multiple files reversing the output: .Bd -literal -offset indent $ md5 -r /boot/loader.conf /etc/rc.conf -ada5f60f23af88ff95b8091d6d67bef6 /boot/loader.conf -d80bf36c332dc0fdc479366ec3fa44cd /etc/rc.conf +ada5f60f23af88ff95b8091d6d67bef6 /boot/loader.conf +d80bf36c332dc0fdc479366ec3fa44cd /etc/rc.conf .Ed .Pp Write the digest for .Pa /boot/loader.conf in a file named .Pa digest . Then calculate the checksum again and validate it against the checksum string extracted from the .Pa digest file: .Bd -literal -offset indent $ md5 /boot/loader.conf > digest && md5 -c $(cut -f2 -d= digest) /boot/loader.conf MD5 (/boot/loader.conf) = ada5f60f23af88ff95b8091d6d67bef6 .Ed .Pp Same as above but comparing the digest against an invalid string .Pq Dq randomstring , which results in a failure. .Bd -literal -offset indent $ md5 -c randomstring /boot/loader.conf MD5 (/boot/loader.conf) = ada5f60f23af88ff95b8091d6d67bef6 [ Failed ] .Ed +.Pp +If invoked with a name ending in +.Nm -sum +the +.Fl c +option does not compare against a hash string passed as parameter. +Instead, it expects a digest file, as created under the name +.Pa digest +for +.Pa /boot/loader.conf +in the example above. +.Bd -literal -offset indent +$ md5 -c digest /boot/loader.conf +/boot/loader.conf: OK +.Ed +.Pp +The digest file may contain any number of lines in the format generated with or without the +.Fl r +option +.Pq i.e. in either classical BSD format or in GNU coreutils format . +If a hash value does not match the file, FAILED is printed instead of OK. .Sh SEE ALSO .Xr cksum 1 , .Xr md5 3 , .Xr ripemd 3 , .Xr sha 3 , .Xr sha256 3 , .Xr sha384 3 , .Xr sha512 3 , .Xr skein 3 .Rs .%A R. Rivest .%T The MD5 Message-Digest Algorithm .%O RFC1321 .Re .Rs .%A J. Burrows .%T The Secure Hash Standard .%O FIPS PUB 180-2 .Re .Rs .%A D. Eastlake and P. Jones .%T US Secure Hash Algorithm 1 .%O RFC 3174 .Re .Pp RIPEMD-160 is part of the ISO draft standard .Qq ISO/IEC DIS 10118-3 on dedicated hash functions. .Pp Secure Hash Standard (SHS): .Pa http://csrc.nist.gov/cryptval/shs.html . .Pp The RIPEMD-160 page: .Pa http://www.esat.kuleuven.ac.be/~bosselae/ripemd160.html . .Sh BUGS All of the utilities that end in .Sq sum are intended to be compatible with the GNU coreutils programs. -However, the long arguments and the -.Fl -check -functionality are not provided. +However, the long option functionality is not provided. .Sh ACKNOWLEDGMENTS This program is placed in the public domain for free general use by RSA Data Security. .Pp Support for SHA-1 and RIPEMD-160 has been added by .An Oliver Eikemeier Aq Mt eik@FreeBSD.org . diff --git a/sbin/md5/md5.c b/sbin/md5/md5.c index e553d4c56e85..d4245d2aad4b 100644 --- a/sbin/md5/md5.c +++ b/sbin/md5/md5.c @@ -1,564 +1,682 @@ /* * Derived from: * * MDDRIVER.C - test driver for MD2, MD4 and MD5 */ /* * Copyright (C) 1990-2, RSA Data Security, Inc. Created 1990. All * rights reserved. * * RSA Data Security, Inc. makes no representations concerning either * the merchantability of this software or the suitability of this * software for any particular purpose. It is provided "as is" * without express or implied warranty of any kind. * * These notices must be retained in any copies of any part of this * documentation and/or software. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CAPSICUM #include #include #endif /* * Length of test block, number of test blocks. */ #define TEST_BLOCK_LEN 10000 #define TEST_BLOCK_COUNT 100000 #define MDTESTCOUNT 8 +static int cflag; static int pflag; static int qflag; static int rflag; static int sflag; static int skip; static char* checkAgainst; static int checksFailed; static int failed; typedef void (DIGEST_Init)(void *); typedef void (DIGEST_Update)(void *, const unsigned char *, size_t); typedef char *(DIGEST_End)(void *, char *); extern const char *MD5TestOutput[MDTESTCOUNT]; extern const char *SHA1_TestOutput[MDTESTCOUNT]; extern const char *SHA224_TestOutput[MDTESTCOUNT]; extern const char *SHA256_TestOutput[MDTESTCOUNT]; extern const char *SHA384_TestOutput[MDTESTCOUNT]; extern const char *SHA512_TestOutput[MDTESTCOUNT]; extern const char *SHA512t256_TestOutput[MDTESTCOUNT]; extern const char *RIPEMD160_TestOutput[MDTESTCOUNT]; extern const char *SKEIN256_TestOutput[MDTESTCOUNT]; extern const char *SKEIN512_TestOutput[MDTESTCOUNT]; extern const char *SKEIN1024_TestOutput[MDTESTCOUNT]; typedef struct Algorithm_t { const char *progname; const char *name; const char *(*TestOutput)[MDTESTCOUNT]; DIGEST_Init *Init; DIGEST_Update *Update; DIGEST_End *End; char *(*Data)(const void *, unsigned int, char *); char *(*Fd)(int, char *); } Algorithm_t; static void MD5_Update(MD5_CTX *, const unsigned char *, size_t); static void MDOutput(const Algorithm_t *, char *, char **); static void MDTimeTrial(const Algorithm_t *); static void MDTestSuite(const Algorithm_t *); static char *MDFilter(const Algorithm_t *, char*, int); static void usage(const Algorithm_t *); typedef union { MD5_CTX md5; SHA1_CTX sha1; SHA224_CTX sha224; SHA256_CTX sha256; SHA384_CTX sha384; SHA512_CTX sha512; RIPEMD160_CTX ripemd160; SKEIN256_CTX skein256; SKEIN512_CTX skein512; SKEIN1024_CTX skein1024; } DIGEST_CTX; /* max(MD5_DIGEST_LENGTH, SHA_DIGEST_LENGTH, SHA256_DIGEST_LENGTH, SHA512_DIGEST_LENGTH, RIPEMD160_DIGEST_LENGTH, SKEIN1024_DIGEST_LENGTH)*2+1 */ #define HEX_DIGEST_LENGTH 257 /* algorithm function table */ static const struct Algorithm_t Algorithm[] = { { "md5", "MD5", &MD5TestOutput, (DIGEST_Init*)&MD5Init, (DIGEST_Update*)&MD5_Update, (DIGEST_End*)&MD5End, &MD5Data, &MD5Fd }, { "sha1", "SHA1", &SHA1_TestOutput, (DIGEST_Init*)&SHA1_Init, (DIGEST_Update*)&SHA1_Update, (DIGEST_End*)&SHA1_End, &SHA1_Data, &SHA1_Fd }, { "sha224", "SHA224", &SHA224_TestOutput, (DIGEST_Init*)&SHA224_Init, (DIGEST_Update*)&SHA224_Update, (DIGEST_End*)&SHA224_End, &SHA224_Data, &SHA224_Fd }, { "sha256", "SHA256", &SHA256_TestOutput, (DIGEST_Init*)&SHA256_Init, (DIGEST_Update*)&SHA256_Update, (DIGEST_End*)&SHA256_End, &SHA256_Data, &SHA256_Fd }, { "sha384", "SHA384", &SHA384_TestOutput, (DIGEST_Init*)&SHA384_Init, (DIGEST_Update*)&SHA384_Update, (DIGEST_End*)&SHA384_End, &SHA384_Data, &SHA384_Fd }, { "sha512", "SHA512", &SHA512_TestOutput, (DIGEST_Init*)&SHA512_Init, (DIGEST_Update*)&SHA512_Update, (DIGEST_End*)&SHA512_End, &SHA512_Data, &SHA512_Fd }, { "sha512t256", "SHA512t256", &SHA512t256_TestOutput, (DIGEST_Init*)&SHA512_256_Init, (DIGEST_Update*)&SHA512_256_Update, (DIGEST_End*)&SHA512_256_End, &SHA512_256_Data, &SHA512_256_Fd }, { "rmd160", "RMD160", &RIPEMD160_TestOutput, (DIGEST_Init*)&RIPEMD160_Init, (DIGEST_Update*)&RIPEMD160_Update, (DIGEST_End*)&RIPEMD160_End, &RIPEMD160_Data, &RIPEMD160_Fd }, { "skein256", "Skein256", &SKEIN256_TestOutput, (DIGEST_Init*)&SKEIN256_Init, (DIGEST_Update*)&SKEIN256_Update, (DIGEST_End*)&SKEIN256_End, &SKEIN256_Data, &SKEIN256_Fd }, { "skein512", "Skein512", &SKEIN512_TestOutput, (DIGEST_Init*)&SKEIN512_Init, (DIGEST_Update*)&SKEIN512_Update, (DIGEST_End*)&SKEIN512_End, &SKEIN512_Data, &SKEIN512_Fd }, { "skein1024", "Skein1024", &SKEIN1024_TestOutput, (DIGEST_Init*)&SKEIN1024_Init, (DIGEST_Update*)&SKEIN1024_Update, (DIGEST_End*)&SKEIN1024_End, &SKEIN1024_Data, &SKEIN1024_Fd } }; +static unsigned digest; +static unsigned malformed; +static bool gnu_emu = false; + static void MD5_Update(MD5_CTX *c, const unsigned char *data, size_t len) { MD5Update(c, data, len); } +struct chksumrec { + char *filename; + char *chksum; + struct chksumrec *next; +}; + +static struct chksumrec *head = NULL; +static struct chksumrec **next = &head; + +#define PADDING 7 /* extra padding for "SHA512t256 (...) = ...\n" style */ +#define CHKFILELINELEN (HEX_DIGEST_LENGTH + MAXPATHLEN + PADDING) + +static int gnu_check(const char *checksumsfile) +{ + FILE *inp; + char linebuf[CHKFILELINELEN]; + int linelen; + int lineno; + char *filename; + char *hashstr; + struct chksumrec *rec; + const char *digestname; + int digestnamelen; + int hashstrlen; + + if ((inp = fopen(checksumsfile, "r")) == NULL) + err(1, "%s", checksumsfile); + digestname = Algorithm[digest].name; + digestnamelen = strlen(digestname); + hashstrlen = strlen(*(Algorithm[digest].TestOutput[0])); + lineno = 1; + while (fgets(linebuf, sizeof(linebuf), inp) != NULL) { + linelen = strlen(linebuf) - 1; + if (linelen <= 0) + break; + if (linebuf[linelen] != '\n') + errx(1, "malformed input line %d (len=%d)", lineno, linelen); + linebuf[linelen] = '\0'; + filename = linebuf + digestnamelen + 2; + hashstr = linebuf + linelen - hashstrlen; + /* + * supported formats: + * BSD: (): + * GNU: [ *] + */ + if (linelen >= digestnamelen + hashstrlen + 6 && + strncmp(linebuf, digestname, digestnamelen) == 0 && + strncmp(filename - 2, " (", 2) == 0 && + strncmp(hashstr - 4, ") = ", 4) == 0) { + *(hashstr - 4) = '\0'; + } else if (linelen >= hashstrlen + 3 && + linebuf[hashstrlen] == ' ') { + linebuf[hashstrlen] = '\0'; + hashstr = linebuf; + filename = linebuf + hashstrlen + 1; + if (*filename == ' ' || *filename == '*') + filename++; + } else { + malformed++; + continue; + } + rec = malloc(sizeof (*rec)); + if (rec == NULL) + errx(1, "malloc failed"); + rec->chksum = strdup(hashstr); + rec->filename = strdup(filename); + if (rec->chksum == NULL || rec->filename == NULL) + errx(1, "malloc failed"); + rec->next = NULL; + *next = rec; + next = &rec->next; + lineno++; + } + fclose(inp); + return (lineno - 1); +} + /* Main driver. Arguments (may be any combination): -sstring - digests string -t - runs time trial -x - runs test script filename - digests file (none) - digests standard input */ int main(int argc, char *argv[]) { #ifdef HAVE_CAPSICUM cap_rights_t rights; #endif int ch, fd; char *p, *string; char buf[HEX_DIGEST_LENGTH]; size_t len; - unsigned digest; char *progname; - bool gnu_emu = false; + struct chksumrec *rec; + int numrecs; if ((progname = strrchr(argv[0], '/')) == NULL) progname = argv[0]; else progname++; /* * GNU coreutils has a number of programs named *sum. These produce * similar results to the BSD version, but in a different format, * similar to BSD's -r flag. We install links to this program with * ending 'sum' to provide this compatibility. Check here to see if the * name of the program ends in 'sum', set the flag and drop the 'sum' so * the digest lookup works. Also, make -t a nop when running in this mode * since that means 'text file' there (though it's a nop in coreutils * on unix-like systems). The -c flag conflicts, so it's just disabled * in this mode (though in the future it might be implemented). */ len = strlen(progname); if (len > 3 && strcmp(progname + len - 3, "sum") == 0) { - progname[len - 3] = '\0'; + len -= 3; rflag = 1; gnu_emu = true; } for (digest = 0; digest < sizeof(Algorithm)/sizeof(*Algorithm); digest++) - if (strcasecmp(Algorithm[digest].progname, progname) == 0) + if (strncasecmp(Algorithm[digest].progname, progname, len) == 0) break; if (digest == sizeof(Algorithm)/sizeof(*Algorithm)) digest = 0; failed = 0; checkAgainst = NULL; checksFailed = 0; skip = 0; while ((ch = getopt(argc, argv, "bc:pqrs:tx")) != -1) switch (ch) { case 'b': break; case 'c': + cflag = 1; if (gnu_emu) - errx(1, "-c check option not supported"); - checkAgainst = optarg; + numrecs = gnu_check(optarg); + else + checkAgainst = optarg; break; case 'p': pflag = 1; break; case 'q': qflag = 1; break; case 'r': rflag = 1; break; case 's': sflag = 1; string = optarg; break; case 't': if (!gnu_emu) { MDTimeTrial(&Algorithm[digest]); skip = 1; } /* else: text mode is a nop */ break; case 'x': MDTestSuite(&Algorithm[digest]); skip = 1; break; default: usage(&Algorithm[digest]); } argc -= optind; argv += optind; #ifdef HAVE_CAPSICUM if (caph_limit_stdout() < 0 || caph_limit_stderr() < 0) err(1, "unable to limit rights for stdio"); #endif + if (cflag && gnu_emu) { + /* + * Replace argv by an array of filenames from the digest file + */ + argc = 0; + argv = (char**)calloc(sizeof(char *), numrecs + 1); + for (rec = head; rec != NULL; rec = rec->next) { + argv[argc] = rec->filename; + argc++; + } + argv[argc] = NULL; + rec = head; + } + if (*argv) { do { if ((fd = open(*argv, O_RDONLY)) < 0) { warn("%s", *argv); failed++; continue; } /* * XXX Enter capability mode on the last argv file. * When a casper file service or other approach is * available, switch to that and enter capability mode * earlier. */ if (*(argv + 1) == NULL) { #ifdef HAVE_CAPSICUM cap_rights_init(&rights, CAP_READ); if (caph_rights_limit(fd, &rights) < 0 || caph_enter() < 0) err(1, "capsicum"); #endif } + if (cflag && gnu_emu) { + checkAgainst = rec->chksum; + rec = rec->next; + } p = Algorithm[digest].Fd(fd, buf); (void)close(fd); MDOutput(&Algorithm[digest], p, argv); } while (*++argv); - } else if (!sflag && !skip) { + } else if (!cflag && !sflag && !skip) { #ifdef HAVE_CAPSICUM if (caph_limit_stdin() < 0 || caph_enter() < 0) err(1, "capsicum"); #endif p = MDFilter(&Algorithm[digest], (char *)&buf, pflag); MDOutput(&Algorithm[digest], p, NULL); } else if (sflag) { len = strlen(string); p = Algorithm[digest].Data(string, len, buf); MDOutput(&Algorithm[digest], p, &string); } - + if (gnu_emu) { + if (malformed > 0) + warnx("WARNING: %d lines are improperly formatted", malformed); + if (checksFailed > 0) + warnx("WARNING: %d computed checksums did NOT match", checksFailed); + } if (failed != 0) return (1); if (checksFailed != 0) return (2); return (0); } /* * Common output handling */ static void MDOutput(const Algorithm_t *alg, char *p, char *argv[]) { + bool checkfailed = false; + if (p == NULL) { warn("%s", *argv); failed++; } else { /* * If argv is NULL we are reading from stdin, where the output * format has always been just the hash. */ - if (qflag || argv == NULL) - printf("%s", p); - else if (rflag) - printf("%s %s", p, *argv); - else - printf("%s (%s) = %s", - alg->name, *argv, p); - if (checkAgainst && strcasecmp(checkAgainst, p) != 0) - { - checksFailed++; - if (!qflag) - printf(" [ Failed ]"); + if (cflag && gnu_emu) { + checkfailed = strcasecmp(checkAgainst, p) != 0; + if (!qflag || checkfailed) + printf("%s: %s\n", *argv, checkfailed ? "FAILED" : "OK"); + } else if (qflag || argv == NULL) { + printf("%s\n", p); + } else { + if (rflag) + printf("%s %s", p, *argv); + else + printf("%s (%s) = %s", alg->name, *argv, p); + if (checkAgainst) { + checkfailed = strcasecmp(checkAgainst, p) != 0; + if (!qflag && checkfailed) + printf(" [ Failed ]"); + } + printf("\n"); } - printf("\n"); } + if (checkfailed) + checksFailed++; } /* * Measures the time to digest TEST_BLOCK_COUNT TEST_BLOCK_LEN-byte blocks. */ static void MDTimeTrial(const Algorithm_t *alg) { DIGEST_CTX context; struct rusage before, after; struct timeval total; float seconds; unsigned char block[TEST_BLOCK_LEN]; unsigned int i; char *p, buf[HEX_DIGEST_LENGTH]; printf("%s time trial. Digesting %d %d-byte blocks ...", alg->name, TEST_BLOCK_COUNT, TEST_BLOCK_LEN); fflush(stdout); /* Initialize block */ for (i = 0; i < TEST_BLOCK_LEN; i++) block[i] = (unsigned char) (i & 0xff); /* Start timer */ getrusage(RUSAGE_SELF, &before); /* Digest blocks */ alg->Init(&context); for (i = 0; i < TEST_BLOCK_COUNT; i++) alg->Update(&context, block, TEST_BLOCK_LEN); p = alg->End(&context, buf); /* Stop timer */ getrusage(RUSAGE_SELF, &after); timersub(&after.ru_utime, &before.ru_utime, &total); seconds = total.tv_sec + (float) total.tv_usec / 1000000; printf(" done\n"); printf("Digest = %s", p); printf("\nTime = %f seconds\n", seconds); printf("Speed = %f MiB/second\n", (float) TEST_BLOCK_LEN * (float) TEST_BLOCK_COUNT / seconds / (1 << 20)); } /* * Digests a reference suite of strings and prints the results. */ static const char *MDTestInput[MDTESTCOUNT] = { "", "a", "abc", "message digest", "abcdefghijklmnopqrstuvwxyz", "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789", "12345678901234567890123456789012345678901234567890123456789012345678901234567890", "MD5 has not yet (2001-09-03) been broken, but sufficient attacks have been made \ that its security is in some doubt" }; const char *MD5TestOutput[MDTESTCOUNT] = { "d41d8cd98f00b204e9800998ecf8427e", "0cc175b9c0f1b6a831c399e269772661", "900150983cd24fb0d6963f7d28e17f72", "f96b697d7cb7938d525a2f31aaf161d0", "c3fcd3d76192e4007dfb496cca67e13b", "d174ab98d277d9f5a5611c2c9f419d9f", "57edf4a22be3c955ac49da2e2107b67a", "b50663f41d44d92171cb9976bc118538" }; const char *SHA1_TestOutput[MDTESTCOUNT] = { "da39a3ee5e6b4b0d3255bfef95601890afd80709", "86f7e437faa5a7fce15d1ddcb9eaeaea377667b8", "a9993e364706816aba3e25717850c26c9cd0d89d", "c12252ceda8be8994d5fa0290a47231c1d16aae3", "32d10c7b8cf96570ca04ce37f2a19d84240d3a89", "761c457bf73b14d27e9e9265c46f4b4dda11f940", "50abf5706a150990a08b2c5ea40fa0e585554732", "18eca4333979c4181199b7b4fab8786d16cf2846" }; const char *SHA224_TestOutput[MDTESTCOUNT] = { "d14a028c2a3a2bc9476102bb288234c415a2b01f828ea62ac5b3e42f", "abd37534c7d9a2efb9465de931cd7055ffdb8879563ae98078d6d6d5", "23097d223405d8228642a477bda255b32aadbce4bda0b3f7e36c9da7", "2cb21c83ae2f004de7e81c3c7019cbcb65b71ab656b22d6d0c39b8eb", "45a5f72c39c5cff2522eb3429799e49e5f44b356ef926bcf390dccc2", "bff72b4fcb7d75e5632900ac5f90d219e05e97a7bde72e740db393d9", "b50aecbe4e9bb0b57bc5f3ae760a8e01db24f203fb3cdcd13148046e", "5ae55f3779c8a1204210d7ed7689f661fbe140f96f272ab79e19d470" }; const char *SHA256_TestOutput[MDTESTCOUNT] = { "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855", "ca978112ca1bbdcafac231b39a23dc4da786eff8147c4e72b9807785afee48bb", "ba7816bf8f01cfea414140de5dae2223b00361a396177a9cb410ff61f20015ad", "f7846f55cf23e14eebeab5b4e1550cad5b509e3348fbc4efa3a1413d393cb650", "71c480df93d6ae2f1efad1447c66c9525e316218cf51fc8d9ed832f2daf18b73", "db4bfcbd4da0cd85a60c3c37d3fbd8805c77f15fc6b1fdfe614ee0a7c8fdb4c0", "f371bc4a311f2b009eef952dd83ca80e2b60026c8e935592d0f9c308453c813e", "e6eae09f10ad4122a0e2a4075761d185a272ebd9f5aa489e998ff2f09cbfdd9f" }; const char *SHA384_TestOutput[MDTESTCOUNT] = { "38b060a751ac96384cd9327eb1b1e36a21fdb71114be07434c0cc7bf63f6e1da274edebfe76f65fbd51ad2f14898b95b", "54a59b9f22b0b80880d8427e548b7c23abd873486e1f035dce9cd697e85175033caa88e6d57bc35efae0b5afd3145f31", "cb00753f45a35e8bb5a03d699ac65007272c32ab0eded1631a8b605a43ff5bed8086072ba1e7cc2358baeca134c825a7", "473ed35167ec1f5d8e550368a3db39be54639f828868e9454c239fc8b52e3c61dbd0d8b4de1390c256dcbb5d5fd99cd5", "feb67349df3db6f5924815d6c3dc133f091809213731fe5c7b5f4999e463479ff2877f5f2936fa63bb43784b12f3ebb4", "1761336e3f7cbfe51deb137f026f89e01a448e3b1fafa64039c1464ee8732f11a5341a6f41e0c202294736ed64db1a84", "b12932b0627d1c060942f5447764155655bd4da0c9afa6dd9b9ef53129af1b8fb0195996d2de9ca0df9d821ffee67026", "99428d401bf4abcd4ee0695248c9858b7503853acfae21a9cffa7855f46d1395ef38596fcd06d5a8c32d41a839cc5dfb" }; const char *SHA512_TestOutput[MDTESTCOUNT] = { "cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e", "1f40fc92da241694750979ee6cf582f2d5d7d28e18335de05abc54d0560e0f5302860c652bf08d560252aa5e74210546f369fbbbce8c12cfc7957b2652fe9a75", "ddaf35a193617abacc417349ae20413112e6fa4e89a97ea20a9eeee64b55d39a2192992a274fc1a836ba3c23a3feebbd454d4423643ce80e2a9ac94fa54ca49f", "107dbf389d9e9f71a3a95f6c055b9251bc5268c2be16d6c13492ea45b0199f3309e16455ab1e96118e8a905d5597b72038ddb372a89826046de66687bb420e7c", "4dbff86cc2ca1bae1e16468a05cb9881c97f1753bce3619034898faa1aabe429955a1bf8ec483d7421fe3c1646613a59ed5441fb0f321389f77f48a879c7b1f1", "1e07be23c26a86ea37ea810c8ec7809352515a970e9253c26f536cfc7a9996c45c8370583e0a78fa4a90041d71a4ceab7423f19c71b9d5a3e01249f0bebd5894", "72ec1ef1124a45b047e8b7c75a932195135bb61de24ec0d1914042246e0aec3a2354e093d76f3048b456764346900cb130d2a4fd5dd16abb5e30bcb850dee843", "e8a835195e039708b13d9131e025f4441dbdc521ce625f245a436dcd762f54bf5cb298d96235e6c6a304e087ec8189b9512cbdf6427737ea82793460c367b9c3" }; const char *SHA512t256_TestOutput[MDTESTCOUNT] = { "c672b8d1ef56ed28ab87c3622c5114069bdd3ad7b8f9737498d0c01ecef0967a", "455e518824bc0601f9fb858ff5c37d417d67c2f8e0df2babe4808858aea830f8", "53048e2681941ef99b2e29b76b4c7dabe4c2d0c634fc6d46e0e2f13107e7af23", "0cf471fd17ed69d990daf3433c89b16d63dec1bb9cb42a6094604ee5d7b4e9fb", "fc3189443f9c268f626aea08a756abe7b726b05f701cb08222312ccfd6710a26", "cdf1cc0effe26ecc0c13758f7b4a48e000615df241284185c39eb05d355bb9c8", "2c9fdbc0c90bdd87612ee8455474f9044850241dc105b1e8b94b8ddf5fac9148", "dd095fc859b336c30a52548b3dc59fcc0d1be8616ebcf3368fad23107db2d736" }; const char *RIPEMD160_TestOutput[MDTESTCOUNT] = { "9c1185a5c5e9fc54612808977ee8f548b2258d31", "0bdc9d2d256b3ee9daae347be6f4dc835a467ffe", "8eb208f7e05d987a9b044a8e98c6b087f15a0bfc", "5d0689ef49d2fae572b881b123a85ffa21595f36", "f71c27109c692c1b56bbdceb5b9d2865b3708dbc", "b0e20b6e3116640286ed3a87a5713079b21f5189", "9b752e45573d4b39f4dbd3323cab82bf63326bfb", "5feb69c6bf7c29d95715ad55f57d8ac5b2b7dd32" }; const char *SKEIN256_TestOutput[MDTESTCOUNT] = { "c8877087da56e072870daa843f176e9453115929094c3a40c463a196c29bf7ba", "7fba44ff1a31d71a0c1f82e6e82fb5e9ac6c92a39c9185b9951fed82d82fe635", "258bdec343b9fde1639221a5ae0144a96e552e5288753c5fec76c05fc2fc1870", "4d2ce0062b5eb3a4db95bc1117dd8aa014f6cd50fdc8e64f31f7d41f9231e488", "46d8440685461b00e3ddb891b2ecc6855287d2bd8834a95fb1c1708b00ea5e82", "7c5eb606389556b33d34eb2536459528dc0af97adbcd0ce273aeb650f598d4b2", "4def7a7e5464a140ae9c3a80279fbebce4bd00f9faad819ab7e001512f67a10d", "d9c017dbe355f318d036469eb9b5fbe129fc2b5786a9dc6746a516eab6fe0126" }; const char *SKEIN512_TestOutput[MDTESTCOUNT] = { "bc5b4c50925519c290cc634277ae3d6257212395cba733bbad37a4af0fa06af41fca7903d06564fea7a2d3730dbdb80c1f85562dfcc070334ea4d1d9e72cba7a", "b1cd8d33f61b3737adfd59bb13ad82f4a9548e92f22956a8976cca3fdb7fee4fe91698146c4197cec85d38b83c5d93bdba92c01fd9a53870d0c7f967bc62bdce", "8f5dd9ec798152668e35129496b029a960c9a9b88662f7f9482f110b31f9f93893ecfb25c009baad9e46737197d5630379816a886aa05526d3a70df272d96e75", "15b73c158ffb875fed4d72801ded0794c720b121c0c78edf45f900937e6933d9e21a3a984206933d504b5dbb2368000411477ee1b204c986068df77886542fcc", "23793ad900ef12f9165c8080da6fdfd2c8354a2929b8aadf83aa82a3c6470342f57cf8c035ec0d97429b626c4d94f28632c8f5134fd367dca5cf293d2ec13f8c", "0c6bed927e022f5ddcf81877d42e5f75798a9f8fd3ede3d83baac0a2f364b082e036c11af35fe478745459dd8f5c0b73efe3c56ba5bb2009208d5a29cc6e469c", "2ca9fcffb3456f297d1b5f407014ecb856f0baac8eb540f534b1f187196f21e88f31103128c2f03fcc9857d7a58eb66f9525e2302d88833ee069295537a434ce", "1131f2aaa0e97126c9314f9f968cc827259bbfabced2943bb8c9274448998fb3b78738b4580dd500c76105fd3c03e465e1414f2c29664286b1f79d3e51128125" }; const char *SKEIN1024_TestOutput[MDTESTCOUNT] = { "0fff9563bb3279289227ac77d319b6fff8d7e9f09da1247b72a0a265cd6d2a62645ad547ed8193db48cff847c06494a03f55666d3b47eb4c20456c9373c86297d630d5578ebd34cb40991578f9f52b18003efa35d3da6553ff35db91b81ab890bec1b189b7f52cb2a783ebb7d823d725b0b4a71f6824e88f68f982eefc6d19c6", "6ab4c4ba9814a3d976ec8bffa7fcc638ceba0544a97b3c98411323ffd2dc936315d13dc93c13c4e88cda6f5bac6f2558b2d8694d3b6143e40d644ae43ca940685cb37f809d3d0550c56cba8036dee729a4f8fb960732e59e64d57f7f7710f8670963cdcdc95b41daab4855fcf8b6762a64b173ee61343a2c7689af1d293eba97", "35a599a0f91abcdb4cb73c19b8cb8d947742d82c309137a7caed29e8e0a2ca7a9ff9a90c34c1908cc7e7fd99bb15032fb86e76df21b72628399b5f7c3cc209d7bb31c99cd4e19465622a049afbb87c03b5ce3888d17e6e667279ec0aa9b3e2712624c01b5f5bbe1a564220bdcf6990af0c2539019f313fdd7406cca3892a1f1f", "ea891f5268acd0fac97467fc1aa89d1ce8681a9992a42540e53babee861483110c2d16f49e73bac27653ff173003e40cfb08516cd34262e6af95a5d8645c9c1abb3e813604d508b8511b30f9a5c1b352aa0791c7d2f27b2706dccea54bc7de6555b5202351751c3299f97c09cf89c40f67187e2521c0fad82b30edbb224f0458", "f23d95c2a25fbcd0e797cd058fec39d3c52d2b5afd7a9af1df934e63257d1d3dcf3246e7329c0f1104c1e51e3d22e300507b0c3b9f985bb1f645ef49835080536becf83788e17fed09c9982ba65c3cb7ffe6a5f745b911c506962adf226e435c42f6f6bc08d288f9c810e807e3216ef444f3db22744441deefa4900982a1371f", "cf3889e8a8d11bfd3938055d7d061437962bc5eac8ae83b1b71c94be201b8cf657fdbfc38674997a008c0c903f56a23feb3ae30e012377f1cfa080a9ca7fe8b96138662653fb3335c7d06595bf8baf65e215307532094cfdfa056bd8052ab792a3944a2adaa47b30335b8badb8fe9eb94fe329cdca04e58bbc530f0af709f469", "cf21a613620e6c119eca31fdfaad449a8e02f95ca256c21d2a105f8e4157048f9fe1e897893ea18b64e0e37cb07d5ac947f27ba544caf7cbc1ad094e675aed77a366270f7eb7f46543bccfa61c526fd628408058ed00ed566ac35a9761d002e629c4fb0d430b2f4ad016fcc49c44d2981c4002da0eecc42144160e2eaea4855a", "e6799b78db54085a2be7ff4c8007f147fa88d326abab30be0560b953396d8802feee9a15419b48a467574e9283be15685ca8a079ee52b27166b64dd70b124b1d4e4f6aca37224c3f2685e67e67baef9f94b905698adc794a09672aba977a61b20966912acdb08c21a2c37001785355dc884751a21f848ab36e590331ff938138" }; static void MDTestSuite(const Algorithm_t *alg) { int i; char buffer[HEX_DIGEST_LENGTH]; printf("%s test suite:\n", alg->name); for (i = 0; i < MDTESTCOUNT; i++) { (*alg->Data)(MDTestInput[i], strlen(MDTestInput[i]), buffer); printf("%s (\"%s\") = %s", alg->name, MDTestInput[i], buffer); if (strcmp(buffer, (*alg->TestOutput)[i]) == 0) { printf(" - verified correct\n"); } else { printf(" - INCORRECT RESULT!\n"); failed++; } } } /* * Digests the standard input and prints the result. */ static char * MDFilter(const Algorithm_t *alg, char *buf, int tee) { DIGEST_CTX context; unsigned int len; unsigned char buffer[BUFSIZ]; char *p; alg->Init(&context); while ((len = fread(buffer, 1, BUFSIZ, stdin))) { if (tee && len != fwrite(buffer, 1, len, stdout)) err(1, "stdout"); alg->Update(&context, buffer, len); } p = alg->End(&context, buf); return (p); } static void usage(const Algorithm_t *alg) { - fprintf(stderr, "usage: %s [-pqrtx] [-c string] [-s string] [files ...]\n", alg->progname); + if (gnu_emu) + fprintf(stderr, "usage: %ssum [-pqrtx] [-c file] [-s string] [files ...]\n", alg->progname); + else + fprintf(stderr, "usage: %s [-pqrtx] [-c string] [-s string] [files ...]\n", alg->progname); exit(1); } diff --git a/sbin/md5/tests/Makefile b/sbin/md5/tests/Makefile index b37332aa9894..93f3913c687d 100644 --- a/sbin/md5/tests/Makefile +++ b/sbin/md5/tests/Makefile @@ -1,41 +1,42 @@ # $FreeBSD$ .include PACKAGE= tests TEST_DIR= ${SRCTOP}/sbin/md5/tests .PATH: ${TEST_DIR} FILESGROUPS+= FILESinputs FILESinputsPACKAGE= ${PACKAGE} FILESinputsDIR= ${TESTSDIR} FILESinputs!= echo ${TEST_DIR}/*.inp FILESGROUPS+= FILESchkfiles FILESchkfilesPACKAGE= ${PACKAGE} FILESchkfilesDIR= ${TESTSDIR} FILESchkfiles!= echo ${TEST_DIR}/*.chk FILESGROUPS+= FILESdigests FILESdigestsPACKAGE= ${PACKAGE} FILESdigestsDIR= ${TESTSDIR} FILESdigests!= echo ${TEST_DIR}/*.digest FILESGROUPS+= FILESparam FILESparamPACKAGE= ${PACKAGE} FILESparamDIR= ${TESTSDIR} FILESparam!= echo ${TEST_DIR}/*.txt PLAIN_TESTS_SH+= self-test PLAIN_TESTS_SH+= bsd-c-test PLAIN_TESTS_SH+= bsd-p-test PLAIN_TESTS_SH+= bsd-s-test +PLAIN_TESTS_SH+= coreutils-c-test .SUFFIXES: .SH .SH.sh: sed 's|%%TESTSBASE%%|${TESTSBASE}|g' ${.ALLSRC} > ${.TARGET} .include diff --git a/sbin/md5/tests/coreutils-c-test.SH b/sbin/md5/tests/coreutils-c-test.SH new file mode 100644 index 000000000000..5996e533c627 --- /dev/null +++ b/sbin/md5/tests/coreutils-c-test.SH @@ -0,0 +1,21 @@ +#!/bin/sh + +/bin/cp %%TESTSBASE%%/sbin/md5/*.inp . || exit 127 + +exitcode=0 + +testloop () { + opt=$1 + + while read algorithm; do + ${algorithm}sum -c %%TESTSBASE%%/sbin/md5/${algorithm}.digest || exitcode=1 + ${algorithm}sum -c %%TESTSBASE%%/sbin/md5/${algorithm}sum.digest || exitcode=1 + done < %%TESTSBASE%%/sbin/md5/algorithms.txt +} + +testloop "" +testloop -q +testloop -r +testloop -qr + +exit $exitcode