diff --git a/sys/conf/NOTES b/sys/conf/NOTES index a51beed34758..f25c98ca7e5e 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1,2695 +1,2697 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # # MAXPHYS and DFLTPHYS # # These are the max and default 'raw' I/O block device access sizes. # Reads and writes will be split into DFLTPHYS chunks. Some applications # have better performance with larger raw I/O access sizes. Typically # MAXPHYS should be twice the size of DFLTPHYS. Note that certain VM # parameters are derived from these values and making them too large # can make an an unbootable kernel. # # The defaults are 64K and 128K respectively. options DFLTPHYS=(64*1024) options MAXPHYS=(128*1024) # This allows you to actually store this configuration file into # the kernel binary itself. See config(8) for more details. # options INCLUDE_CONFIG_FILE # Include this file in kernel options GEOM_AES # Don't use, use GEOM_BDE options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation options GEOM_GATE # Userland services. options GEOM_JOURNAL # Journaling. options GEOM_LABEL # Providers labelization. options GEOM_LINUX_LVM # Linux LVM2 volumes options GEOM_MBR # DOS/MBR partitioning options GEOM_MIRROR # Disk mirroring. options GEOM_MULTIPATH # Disk multipath options GEOM_NOP # Test class. options GEOM_PART_APM # Apple partitioning options GEOM_PART_BSD # BSD disklabel options GEOM_PART_EBR # Extended Boot Records options GEOM_PART_EBR_COMPAT # Backward compatible partition names options GEOM_PART_GPT # GPT partitioning options GEOM_PART_MBR # MBR partitioning options GEOM_PART_PC98 # PC-9800 disk partitioning options GEOM_PART_VTOC8 # SMI VTOC8 disk label options GEOM_PC98 # NEC PC9800 partitioning options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning options GEOM_UZIP # Read-only compressed disks options GEOM_VIRSTOR # Virtual storage. options GEOM_VOL # Volume names from UFS superblock options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE provides significant performance advantages over 4BSD on many # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues # and scheduler locks. It also has a stronger notion of interactivity # which leads to better responsiveness even on uniprocessor machines. This # will eventually become the default scheduler. # # SCHED_STATS is a debugging option which keeps some stats in the sysctl # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. # options SCHED_4BSD options SCHED_STATS #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behaviour is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin # if the thread that currently owns the rwlock is executing on another # CPU. This behaviour is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_RWLOCKS # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread # that currently owns the lock is executing on another CPU. Note that # in addition to enabling this option, individual sx locks must be # initialized with the SX_ADAPTIVESPIN flag. options ADAPTIVE_SX # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SX_NOINLINE forces sx lock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options SX_NOINLINE # SMP Debugging Options: # # PREEMPTION allows the threads that are in the kernel to be preempted by # higher priority [interrupt] threads. It helps with interactivity # and allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # MUTEX_DEBUG enables various extra assertions in the mutex code. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues as well as sleep wait message # frequency. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options MUTEX_DEBUG options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. options LOCK_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # Enable FreeBSD7 compatibility syscalls options COMPAT_FREEBSD7 # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing mechanism imported from BSD/OS. Currently # it has no userland interface aside from a few sysctl's. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it must be a power of two. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. # options KTR options KTR_ENTRIES=1024 options KTR_COMPILE=(KTR_INTR|KTR_PROC) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as KTR(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # RESTARTABLE_PANICS allows one to continue from a panic as if it were # a call to the debugger to continue from a panic as instead. It is only # useful if a kernel debugger is present. To restart from a panic, reset # the panicstr variable to NULL and continue execution. This option is # for development use only and should NOT be used in production systems # to "workaround" a panic. # #options RESTARTABLE_PANICS # # This option let some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT # # STACK enables the stack(9) facility, allowing the capture of kernel stack # for the purpose of procinfo(1), etc. stack(9) will also be compiled in # automatically if DDB(4) is compiled into the kernel. # options STACK ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options ROUTETABLES=2 # max 16. 1 is back compatible. # In order to enable IPSEC you MUST also add device crypto to # your kernel configuration options IPSEC #IP security (requires device crypto) #options IPSEC_DEBUG #debug for IP security # # #DEPRECATED# # Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets # coming through a tunnel to be processed by any configured packet filtering # twice. The default is that packets coming out of a tunnel are _not_ processed; # they are assumed trusted. # # IPSEC history is preserved for such packets, and can be filtered # using ipfw(8)'s 'ipsec' keyword, when this option is enabled. # #options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel options IPX #IPX/SPX communications protocols options NCP #NetWare Core protocol options NETATALK #Appletalk communications protocols options NETATALKDEBUG #Appletalk debugging # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # flowtable cache options FLOWTABLE # # SCTP is a NEW transport protocol defined by # RFC2960 updated by RFC3309 and RFC3758.. and # soon to have a new base RFC and many many more # extensions. This release supports all the extensions # including many drafts (most about to become RFC's). # It is the premeier SCTP implementation in the NET # and is quite well tested. # # Note YOU MUST have both INET and INET6 defined. # you don't have to enable V6, but SCTP is # dual stacked and so far we have not teased apart # the V6 and V4.. since an association can span # both a V6 and V4 address at the SAME time :-) # options SCTP # There are bunches of options: # this one turns on all sorts of # nastly printing that you can # do. Its all controled by a # bit mask (settable by socket opt and # by sysctl). Including will not cause # logging until you set the bits.. but it # can be quite verbose.. so without this # option we don't do any of the tests for # bits and prints.. which makes the code run # faster.. if you are not debugging don't use. options SCTP_DEBUG # # This option turns off the CRC32c checksum. Basically # You will not be able to talk to anyone else that # has not done this. Its more for expermentation to # see how much CPU the CRC32c really takes. Most new # cards for TCP support checksum offload.. so this # option gives you a "view" into what SCTP would be # like with such an offload (which only exists in # high in iSCSI boards so far). With the new # splitting 8's algorithm its not as bad as it used # to be.. but it does speed things up try only # for in a captured lab environment :-) options SCTP_WITH_NO_CSUM # # # All that options after that turn on specific types of # logging. You can monitor CWND growth, flight size # and all sorts of things. Go look at the code and # see. I have used this to produce interesting # charts and graphs as well :-> # # I have not yet commited the tools to get and print # the logs, I will do that eventually .. before then # if you want them send me an email rrs@freebsd.org # You basically must have KTR enabled for these # and you then set the sysctl to turn on/off various # logging bits. Use ktrdump to pull the log and run # it through a dispaly program.. and graphs and other # things too. # options SCTP_LOCK_LOGGING options SCTP_MBUF_LOGGING options SCTP_MBCNT_LOGGING options SCTP_PACKET_LOGGING options SCTP_LTRACE_CHUNKS options SCTP_LTRACE_ERRORS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # IP optional behaviour. # IP_NONLOCALBIND disables the check that bind() usually makes that the # address is one that is assigned to an interface on this machine. # It allows transparent proxies to pretend to be other machines. # How the packet GET to that machine is a problem solved elsewhere, # smart routers, ipfw fwd, etc. options IP_NONLOCALBIND # Allow impersonation for proxies. # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CAR options NETGRAPH_CISCO options NETGRAPH_DEFLATE options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FEC options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI # MPPC compression requires proprietary files (not included) #options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_PRED1 options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_UI options NETGRAPH_VJC # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. device loop # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured or token-ring is enabled. device ether # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. device vlan # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # and ath drivers and will eventually be required by all 802.11 drivers. device wlan options IEEE80211_DEBUG #enable debugging msgs options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. device wlan_wep device wlan_ccmp device wlan_tkip # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. device wlan_xauth # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The 'wlan_amrr' device provides AMRR transmit rate control algorithm device wlan_acl device wlan_amrr # Generic TokenRing device token # The `fddi' device provides generic code to support FDDI. device fddi # The `arcnet' device provides generic code to support Arcnet. device arcnet # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). device sppp # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. DHCP requires bpf. device bpf # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing and benchmarking purposes. device disc # The `edsc' device implements a minimal Ethernet interface, # which discards all packets sent and receives none. device edsc # The `tap' device is a pty-like virtual Ethernet interface device tap # The `tun' device implements (user-)ppp and nos-tun(8) device tun # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements two types of IP4 over IP4 tunneling: # GRE and MOBILE, as specified in the RFC1701 and RFC2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. device gif device gre options XBONEHACK # The `faith' device captures packets sent to it and diverts them # to the IPv4/IPv6 translation daemon. # The `stf' device implements 6to4 encapsulation. device faith device stf # The `ef' device provides support for multiple ethernet frame types # specified via ETHER_* options. See ef(4) for details. device ef options ETHER_II # enable Ethernet_II frame options ETHER_8023 # enable Ethernet_802.3 (Novell) frame options ETHER_8022 # enable Ethernet_802.2 frame options ETHER_SNAP # enable Ethernet_802.2/SNAP frame # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). device pf device pflog device pfsync # Bridge interface. device if_bridge # Common Address Redundancy Protocol. See carp(4) for more details. device carp # IPsec interface. device enc # Link aggregation interface. device lagg # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted and XORP. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_FORWARD enables changing of the packet destination either # to do some sort of policy routing or transparent proxying. Used by # ``ipfw forward''. All redirections apply to locally generated # packets too. Because of this great care is required when # crafting the ruleset. # # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_FORWARD #packet destination changes options IPFIREWALL_NAT #ipfw kernel nat support options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options TCPDEBUG # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. # MBUF_PROFILING enables code to profile the mbuf chains # exiting the system (via participating interfaces) and # return a logarithmic histogram of monitored parameters # (e.g. packet size, wasted space, number of mbufs in chain). options MBUF_STRESS_TEST options MBUF_PROFILING # Statically Link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_DNS options ACCEPT_FILTER_HTTP # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto', 'options IPSEC' # or 'device cryptodev'. options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve # a smooth scheduling of the traffic. options DUMMYNET # Zero copy sockets support. This enables "zero copy" for sending and # receiving data via a socket. The send side works for any type of NIC, # the receive side only works for NICs that support MTUs greater than the # page size of your architecture and that support header splitting. See # zero_copy(9) for more details. options ZERO_COPY_SOCKETS ##################################################################### # FILESYSTEM OPTIONS # # Only the root, /usr, and /tmp filesystems need be statically # compiled; everything else will be automatically loaded at mount # time. (Exception: the UFS family--- FFS --- cannot # currently be demand-loaded.) Some people still prefer to statically # compile other filesystems as well. # # NB: The PORTAL filesystem is known to be buggy, and WILL panic your # system if you attempt to do anything with it. It is included here # as an incentive for some enterprising soul to sit down and fix it. # The UNION filesystem was known to be buggy in the past. It is now # being actively maintained, although there are still some issues being # resolved. # # One of these is mandatory: options FFS #Fast filesystem options NFSCLIENT #Network File System client # The rest are optional: options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options HPFS #OS/2 File system options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSSERVER #Network File System server options NFSLOCKD #Network Lock Manager +options NFSCL #experimental NFS client with NFSv4 +options NFSD #experimental NFS server with NFSv4 # NT File System. Read-mostly, see mount_ntfs(8) for details. # For a full read-write NTFS support consider sysutils/fusefs-ntfs # port/package. options NTFS options NULLFS #NULL filesystem # Broken (depends on NCP): #options NWFS #NetWare filesystem options PORTALFS #Portal filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options UDF #Universal Disk Format options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Gjournal-based UFS journaling support. options UFS_GJOURNAL # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA or Netatalk, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1) PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_GATHERDELAY=10 # Default write gather delay (msec) options NFS_WDELAYHASHSIZ=16 # and with this options NFS_DEBUG # Enable NFS Debugging # Coda stuff: options CODA #CODA filesystem. device vcoda #coda minicache <-> venus comm. # Use the old Coda 5.x venus<->kernel interface instead of the new # realms-aware 6.x protocol. #options CODA_COMPAT_5 # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # # Add support for the ReiserFS filesystem (used in Linux). Currently, # this is limited to read-only access. # options REISERFS # # Add support for the SGI XFS filesystem. Currently, # this is limited to read-only access. # options XFS # Use real implementations of the aio_* system calls. There are numerous # stability and security issues in the current aio code that make it # unsuitable for inclusion on machines with untrusted local users. options VFS_AIO # Cryptographically secure random number generator; /dev/random device random # The system memory devices; /dev/mem, /dev/kmem device mem # The kernel symbol table device; /dev/ksyms device ksyms # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options NTFS_ICONV options UDF_ICONV ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (1000 on most architectures) means a granularity of 1ms # (1s/HZ). Historically, the default was 100, but finer granularity is # required for DUMMYNET and other systems on modern hardware. There are # reasonable arguments that HZ should, in fact, be 100 still; consider, # that reducing the granularity too much might cause excessive overhead in # clock interrupt processing, potentially causing ticks to be missed and thus # actually reducing the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # The sg driver provides a passthrough API that is compatible with the # Linux SG driver. It will work in conjunction with the COMPAT_LINUX # option to run linux SG apps. It can also stand on its own and provide # source level API compatiblity for porting apps to FreeBSD. # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration as the "pass" driver. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #SCSI Environmental Services (and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver device sg #Linux SCSI passthrough # CAM OPTIONS: # debugging options: # -- NOTE -- If you specify one of the bus/target/lun options, you must # specify them all! # CAMDEBUG: When defined enables debugging macros # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses. # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets. # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns. # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE, # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB) options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # build a topology with the SES device that's on the box these drives # are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #BSD-style compatibility pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so # no hints are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (SCO color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behaviour of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_MODE_CHANGE options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # Enable experimental features of the syscons terminal emulator (teken). options TEKEN_UTF8 # UTF-8 output handling options TEKEN_XTERM # xterm-style terminal emulation # # Optional devices: # # # SCSI host adapters: # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. # aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices # such as the Tekram DC-390(T). # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # esp: NCR53c9x. Only for SBUS hardware right now. # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. # wds: WD7000 # # Note that the order is important in order for Buslogic ISA/EISA cards to be # probed correctly. # device bt hint.bt.0.at="isa" hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw device aha hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb device ahc device ahd device amd device esp device iscsi_initiator device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpt device ncr device sym device trm device wds hint.wds.0.at="isa" hint.wds.0.port="0x350" hint.wds.0.irq="11" hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # The adw driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. options ADW_ALLOW_MEMIO # Options used in dev/iscsi (Software iSCSI stack) # options ISCSI_INITIATOR_DEBUG=9 # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role # none=0 # target=1 # initiator=2 # both=3 (not supported currently) # options ISP_DEFAULT_ROLES=2 # Options used in dev/sym/ (Symbios SCSI driver). #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. # The DPT controllers are commonly re-licensed under other brand-names - # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and # Compaq are actually DPT controllers. # # See src/sys/dev/dpt for debugging and other subtle options. # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various # instruments are enabled. The tools in # /usr/sbin/dpt_* assume these to be enabled. # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT. # If you ant the driver to handle timeouts, enable # this option. If your system is very busy, this # option will create more trouble than solve. # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to # wait when timing out with the above option. # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h # DPT_LOST_IRQ When enabled, will try, once per second, to catch # any interrupt that got lost. Seems to help in some # DPT-firmware/Motherboard combinations. Minimal # cost, great benefit. # DPT_RESET_HBA Make "reset" actually reset the controller # instead of fudging it. Only enable this if you # are 100% certain you need it. device dpt # DPT options #!CAM# options DPT_MEASURE_PERFORMANCE #!CAM# options DPT_HANDLE_TIMEOUTS options DPT_TIMEOUT_FACTOR=4 options DPT_LOST_IRQ options DPT_RESET_HBA # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device amrp # SCSI Passthrough interface (optional, CAM req.) device mfi # LSI MegaRAID SAS device mfip # LSI MegaRAID SAS passthrough, requires CAM options MFI_DEBUG # # 3ware ATA RAID # device twe # 3ware ATA RAID # # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM # needs CAM to be present (scbus & pass) # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # The following options are valid on the ATA driver: # # ATA_STATIC_ID: controller numbering is static ie depends on location # else the device numbers are dynamically allocated. options ATA_STATIC_ID # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behaviour. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. There are FreeBSD extentions: # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for some PCI 10/100 ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus" to the kernel config pulls in support for # the generic miibus API and all of the PHY drivers, including a # generic one for PHYs that aren't specifically handled by an # individual driver. device miibus # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros # L2 PCI-Express FastEthernet controllers. # age: Support for gigabit ethernet adapters based on the Attansic/Atheros # L1 PCI express gigabit ethernet controllers. # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # cm: Arcnet SMC COM90c26 / SMC COM90c56 # (and SMC COM90c66 in '56 compatibility mode) adapters. # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # de: Digital Equipment DC21040 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters. # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 # and PC Card devices using these chipsets. # ex: Intel EtherExpress Pro/10 and other i82595-based adapters, # Olicom Ethernet PC Card devices. # fe: Fujitsu MB86960A/MB86965A Ethernet # fea: DEC DEFEA EISA FDDI adapter # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # gem: Apple GMAC/Sun ERI/Sun GEM # hme: Sun HME (Happy Meal Ethernet) # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, # 88E8055, 88E8056 and D-Link 560T/550SX. # lmc: Support for the LMC/SBE wide-area network interface cards. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home # chipsets. These can also be handled by the le(4) driver if the # pcn(4) driver is left out of the kernel. The le(4) driver does not # support the additional features like the MII bus and burst mode of # the PCnet-FAST and greater chipsets though. # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the # Adaptec AIC-6915 "starfire" controller. # This includes dual and quad port cards, as well as one 100baseFX card. # Most of these are 64-bit PCI devices, except for one single port # card which is 32-bit. # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # sn: Support for ISA and PC Card Ethernet devices using the # SMC91C90/92/94/95 chips. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' # cards and integrated ethernet controllers. This includes several # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking # Technologies PN102TX, and the AOpen/Acer ALN-320. # vx: 3Com 3C590 and 3C595 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. # Note: this is not the same as the Winbond W89C940F, which is a # NE2000 clone. # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA/EISA devices is important here device cm hint.cm.0.at="isa" hint.cm.0.port="0x2e0" hint.cm.0.irq="9" hint.cm.0.maddr="0xdc000" device ep device ex device fe hint.fe.0.at="isa" hint.fe.0.port="0x300" device fea device sn hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" device an device wi device xe # PCI Ethernet NICs that use the common MII bus controller code. device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cxgb # Chelsio T3 10 Gigabit Ethernet device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device gem # Apple GMAC/Sun ERI/Sun GEM device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device pcn # AMD Am79C97x PCI 10/100 NICs device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel Pro/1000 Gigabit Ethernet device igb # Intel Pro/1000 PCIE Gigabit Ethernet device ixgbe # Intel Pro/10Gbe PCIE Ethernet device le # AMD Am7900 LANCE and Am79C9xx PCnet device mxge # Myricom Myri-10G 10GbE NIC device nxge # Neterion Xframe 10GbE Server/Storage Adapter device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI FDDI NICs. device fpa # PCI WAN adapters. device lmc # Use "private" jumbo buffers allocated exclusively for the ti(4) driver. # This option is incompatible with the TI_JUMBO_HDRSPLIT option below. #options TI_PRIVATE_JUMBOS # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # ATM related options (Cranor version) # (note: this driver cannot be used with the HARP ATM stack) # # The `en' device provides support for Efficient Networks (ENI) # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0). # # The `hatm' device provides support for Fore/Marconi HE155 and HE622 # ATM PCI cards. # # The `fatm' device provides support for Fore PCA200E ATM PCI cards. # # The `patm' device provides support for IDT77252 based cards like # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards. # # atm device provides generic atm functions and is required for # atm devices. # NATM enables the netnatm protocol family that can be used to # bypass TCP/IP. # # utopia provides the access to the ATM PHY chips and is required for en, # hatm and fatm. # # the current driver supports only PVC operations (no atm-arp, no multicast). # for more details, please read the original documents at # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html # device atm device en device fatm #Fore PCA200E device hatm #Fore/Marconi HE155/622 device patm #IDT77252 cards (ProATM and IDT) device utopia #ATM PHY driver #options NATM #native ATM options LIBMBPOOL #needed by patm, iatm # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tells the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_ich: Intel ICH AC'97 and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_solo: ESS Solo-1x PCI. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. # snd_uaudio: USB audio. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_via8233 device snd_via82c686 device snd_vibes device snd_uaudio # For non-PnP sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # IEEE-488 hardware: # pcii: PCIIA cards (uPD7210 based isa cards) # tnt4882: National Instruments PCI-GPIB card. device pcii hint.pcii.0.at="isa" hint.pcii.0.port="0x2e1" hint.pcii.0.irq="5" hint.pcii.0.drq="1" device tnt4882 # # Miscellaneous hardware: # # scd: Sony CD-ROM using proprietary (non-ATAPI) interface # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # joy: joystick (including IO DATA PCJOY PC Card joystick) # cmx: OmniKey CardMan 4040 pccard smartcard reader # Mitsumi CD-ROM device mcd hint.mcd.0.at="isa" hint.mcd.0.port="0x300" # for the Sony CDU31/33A CDROM device scd hint.scd.0.at="isa" hint.scd.0.port="0x230" device joy # PnP aware, hints for non-PnP only hint.joy.0.at="isa" hint.joy.0.port="0x201" device cmx # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35Mhz) boards where PAL is used # to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enable IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # cbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # MMC/SD # # mmc MMC/SD bus # mmcsd MMC/SD memory card # sdhci Generic PCI SD Host Controller # device mmc device mmcsd device sdhci # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device smb # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge # I2C peripheral devices # # ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC # ds1672 Dallas Semiconductor DS1672 RTC # device ds133x device ds1672 # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # pcfclock Parallel port clock driver. # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCLIENT and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP options BOOTP_BLOCKSIZE=8192 # Override NFS block size # # Add software watchdog routines. # options SW_WATCHDOG # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctls "vm.defer_swapspace_pageouts" and # "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and change a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Also note # that it is likely to break e.g. fstat(1) unless you recompile your # userland with -DDEBUG_LOCKS as well. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # SL811 Controller #device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB Iomega Zip 100 Drive (Requires scbus and da) device umass # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # Diamond Rio 500 MP3 player device urio # # USB serial support device ucom # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra device u3g # USB support for Technologies ARK3116 based serial adapters device uark # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for some Windows CE based serial communication. device uipaq # USB support for Prolific PL-2303 serial adapters device uplcom # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters device uslcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # # Ralink Technology RT2501USB/RT2601USB wireless driver device rum # # Atheros AR5523 wireless driver device uath # # Ralink Technology RT2500USB wireless driver device ural # # ZyDas ZD1211/ZD1211B wireless driver device zyd # # debugging options for the USB subsystem # options USB_DEBUG options U3G_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=it.iso # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/stand/sysinstall # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of entries in a semaphore map. options SEMMAP=31 # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SCSI_NCR_DEBUG options SCSI_NCR_MAX_SYNC=10000 options SCSI_NCR_MAX_WIDE=1 options SCSI_NCR_MYADDR=7 options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options SHOW_BUSYBUFS # List buffers that prevent root unmount options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 diff --git a/sys/conf/files b/sys/conf/files index b94ebe4f42a1..c1f9a424337f 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1,2730 +1,2753 @@ # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # acpi_quirks.h optional acpi \ dependency "$S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ compile-with "${AWK} -f $S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ no-obj no-implicit-rule before-depend \ clean "acpi_quirks.h" aicasm optional ahc | ahd \ dependency "$S/dev/aic7xxx/aicasm/*.[chyl]" \ compile-with "CC='${CC}' ${MAKE} -f $S/dev/aic7xxx/aicasm/Makefile MAKESRCPATH=$S/dev/aic7xxx/aicasm" \ no-obj no-implicit-rule \ clean "aicasm* y.tab.h" aic7xxx_seq.h optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic7xxx_seq.h" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg.h optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic7xxx_reg.h" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg_print.c optional ahc \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic7xxx_seq.h -r aic7xxx_reg.h -p aic7xxx_reg_print.c -i $S/dev/aic7xxx/aic7xxx_osm.h $S/dev/aic7xxx/aic7xxx.seq" \ no-obj no-implicit-rule local \ clean "aic7xxx_reg_print.c" \ dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic7xxx_reg_print.o optional ahc ahc_reg_pretty_print \ compile-with "${NORMAL_C}" \ no-implicit-rule local aic79xx_seq.h optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic79xx_seq.h" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg.h optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule before-depend local \ clean "aic79xx_reg.h" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg_print.c optional ahd pci \ compile-with "./aicasm ${INCLUDES} -I$S/cam/scsi -I$S/dev/aic7xxx -o aic79xx_seq.h -r aic79xx_reg.h -p aic79xx_reg_print.c -i $S/dev/aic7xxx/aic79xx_osm.h $S/dev/aic7xxx/aic79xx.seq" \ no-obj no-implicit-rule local \ clean "aic79xx_reg_print.c" \ dependency "$S/dev/aic7xxx/aic79xx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm" aic79xx_reg_print.o optional ahd pci ahd_reg_pretty_print \ compile-with "${NORMAL_C}" \ no-implicit-rule local emu10k1-alsa%diked.h optional snd_emu10k1 | snd_emu10kx \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/emu10k1-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/emu10k1-alsa.h emu10k1-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "emu10k1-alsa%diked.h" p16v-alsa%diked.h optional snd_emu10kx pci \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p16v-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p16v-alsa.h p16v-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "p16v-alsa%diked.h" p17v-alsa%diked.h optional snd_emu10kx pci \ dependency "$S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p17v-alsa.h" \ compile-with "CC='${CC}' AWK=${AWK} sh $S/tools/emu10k1-mkalsa.sh $S/gnu/dev/sound/pci/p17v-alsa.h p17v-alsa%diked.h" \ no-obj no-implicit-rule before-depend \ clean "p17v-alsa%diked.h" miidevs.h optional miibus | mii \ dependency "$S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ compile-with "${AWK} -f $S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ no-obj no-implicit-rule before-depend \ clean "miidevs.h" pccarddevs.h standard \ dependency "$S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ compile-with "${AWK} -f $S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ no-obj no-implicit-rule before-depend \ clean "pccarddevs.h" teken_state.h optional sc \ dependency "$S/dev/syscons/teken/gensequences $S/dev/syscons/teken/sequences" \ compile-with "${AWK} -f $S/dev/syscons/teken/gensequences $S/dev/syscons/teken/sequences > teken_state.h" \ no-obj no-implicit-rule before-depend \ clean "teken_state.h" usbdevs.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -h" \ no-obj no-implicit-rule before-depend \ clean "usbdevs.h" usbdevs_data.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -d" \ no-obj no-implicit-rule before-depend \ clean "usbdevs_data.h" cam/cam.c optional scbus cam/cam_periph.c optional scbus cam/cam_queue.c optional scbus cam/cam_sim.c optional scbus cam/cam_xpt.c optional scbus cam/scsi/scsi_all.c optional scbus cam/scsi/scsi_cd.c optional cd cam/scsi/scsi_ch.c optional ch cam/scsi/scsi_da.c optional da cam/scsi/scsi_low.c optional ct | ncv | nsp | stg cam/scsi/scsi_low_pisa.c optional ct | ncv | nsp | stg cam/scsi/scsi_pass.c optional pass cam/scsi/scsi_pt.c optional pt cam/scsi/scsi_sa.c optional sa cam/scsi/scsi_ses.c optional ses cam/scsi/scsi_sg.c optional sg cam/scsi/scsi_targ_bh.c optional targbh cam/scsi/scsi_target.c optional targ contrib/altq/altq/altq_cbq.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_cdnr.c optional altq contrib/altq/altq/altq_hfsc.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_priq.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_red.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_rio.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/altq/altq/altq_rmclass.c optional altq contrib/altq/altq/altq_subr.c optional altq \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/dev/acpica/dbcmds.c optional acpi acpi_debug contrib/dev/acpica/dbdisply.c optional acpi acpi_debug contrib/dev/acpica/dbexec.c optional acpi acpi_debug contrib/dev/acpica/dbfileio.c optional acpi acpi_debug contrib/dev/acpica/dbhistry.c optional acpi acpi_debug contrib/dev/acpica/dbinput.c optional acpi acpi_debug contrib/dev/acpica/dbstats.c optional acpi acpi_debug contrib/dev/acpica/dbutils.c optional acpi acpi_debug contrib/dev/acpica/dbxface.c optional acpi acpi_debug contrib/dev/acpica/dmbuffer.c optional acpi acpi_debug contrib/dev/acpica/dmnames.c optional acpi acpi_debug contrib/dev/acpica/dmopcode.c optional acpi acpi_debug contrib/dev/acpica/dmobject.c optional acpi acpi_debug contrib/dev/acpica/dmresrc.c optional acpi acpi_debug contrib/dev/acpica/dmresrcl.c optional acpi acpi_debug contrib/dev/acpica/dmresrcs.c optional acpi acpi_debug contrib/dev/acpica/dmutils.c optional acpi acpi_debug contrib/dev/acpica/dmwalk.c optional acpi acpi_debug contrib/dev/acpica/dsfield.c optional acpi contrib/dev/acpica/dsinit.c optional acpi contrib/dev/acpica/dsmethod.c optional acpi contrib/dev/acpica/dsmthdat.c optional acpi contrib/dev/acpica/dsobject.c optional acpi contrib/dev/acpica/dsopcode.c optional acpi contrib/dev/acpica/dsutils.c optional acpi contrib/dev/acpica/dswexec.c optional acpi contrib/dev/acpica/dswload.c optional acpi contrib/dev/acpica/dswscope.c optional acpi contrib/dev/acpica/dswstate.c optional acpi contrib/dev/acpica/evevent.c optional acpi contrib/dev/acpica/evgpe.c optional acpi contrib/dev/acpica/evgpeblk.c optional acpi contrib/dev/acpica/evmisc.c optional acpi contrib/dev/acpica/evregion.c optional acpi contrib/dev/acpica/evrgnini.c optional acpi contrib/dev/acpica/evsci.c optional acpi contrib/dev/acpica/evxface.c optional acpi contrib/dev/acpica/evxfevnt.c optional acpi contrib/dev/acpica/evxfregn.c optional acpi contrib/dev/acpica/exconfig.c optional acpi contrib/dev/acpica/exconvrt.c optional acpi contrib/dev/acpica/excreate.c optional acpi contrib/dev/acpica/exdump.c optional acpi contrib/dev/acpica/exfield.c optional acpi contrib/dev/acpica/exfldio.c optional acpi contrib/dev/acpica/exmisc.c optional acpi contrib/dev/acpica/exmutex.c optional acpi contrib/dev/acpica/exnames.c optional acpi contrib/dev/acpica/exoparg1.c optional acpi contrib/dev/acpica/exoparg2.c optional acpi contrib/dev/acpica/exoparg3.c optional acpi contrib/dev/acpica/exoparg6.c optional acpi contrib/dev/acpica/exprep.c optional acpi contrib/dev/acpica/exregion.c optional acpi contrib/dev/acpica/exresnte.c optional acpi contrib/dev/acpica/exresolv.c optional acpi contrib/dev/acpica/exresop.c optional acpi contrib/dev/acpica/exstore.c optional acpi contrib/dev/acpica/exstoren.c optional acpi contrib/dev/acpica/exstorob.c optional acpi contrib/dev/acpica/exsystem.c optional acpi contrib/dev/acpica/exutils.c optional acpi contrib/dev/acpica/hwacpi.c optional acpi contrib/dev/acpica/hwgpe.c optional acpi contrib/dev/acpica/hwregs.c optional acpi contrib/dev/acpica/hwsleep.c optional acpi contrib/dev/acpica/hwtimer.c optional acpi contrib/dev/acpica/nsaccess.c optional acpi contrib/dev/acpica/nsalloc.c optional acpi contrib/dev/acpica/nsdump.c optional acpi contrib/dev/acpica/nseval.c optional acpi contrib/dev/acpica/nsinit.c optional acpi contrib/dev/acpica/nsload.c optional acpi contrib/dev/acpica/nsnames.c optional acpi contrib/dev/acpica/nsobject.c optional acpi contrib/dev/acpica/nsparse.c optional acpi contrib/dev/acpica/nssearch.c optional acpi contrib/dev/acpica/nsutils.c optional acpi contrib/dev/acpica/nswalk.c optional acpi contrib/dev/acpica/nsxfeval.c optional acpi contrib/dev/acpica/nsxfname.c optional acpi contrib/dev/acpica/nsxfobj.c optional acpi contrib/dev/acpica/psargs.c optional acpi contrib/dev/acpica/psloop.c optional acpi contrib/dev/acpica/psopcode.c optional acpi contrib/dev/acpica/psparse.c optional acpi contrib/dev/acpica/psscope.c optional acpi contrib/dev/acpica/pstree.c optional acpi contrib/dev/acpica/psutils.c optional acpi contrib/dev/acpica/pswalk.c optional acpi contrib/dev/acpica/psxface.c optional acpi contrib/dev/acpica/rsaddr.c optional acpi contrib/dev/acpica/rscalc.c optional acpi contrib/dev/acpica/rscreate.c optional acpi contrib/dev/acpica/rsdump.c optional acpi contrib/dev/acpica/rsinfo.c optional acpi contrib/dev/acpica/rsio.c optional acpi contrib/dev/acpica/rsirq.c optional acpi contrib/dev/acpica/rslist.c optional acpi contrib/dev/acpica/rsmemory.c optional acpi contrib/dev/acpica/rsmisc.c optional acpi contrib/dev/acpica/rsutils.c optional acpi contrib/dev/acpica/rsxface.c optional acpi contrib/dev/acpica/tbfadt.c optional acpi contrib/dev/acpica/tbfind.c optional acpi contrib/dev/acpica/tbinstal.c optional acpi contrib/dev/acpica/tbutils.c optional acpi contrib/dev/acpica/tbxface.c optional acpi contrib/dev/acpica/tbxfroot.c optional acpi contrib/dev/acpica/utalloc.c optional acpi contrib/dev/acpica/utcache.c optional acpi contrib/dev/acpica/utclib.c optional acpi contrib/dev/acpica/utcopy.c optional acpi contrib/dev/acpica/utdebug.c optional acpi contrib/dev/acpica/utdelete.c optional acpi contrib/dev/acpica/uteval.c optional acpi contrib/dev/acpica/utglobal.c optional acpi contrib/dev/acpica/utinit.c optional acpi contrib/dev/acpica/utmath.c optional acpi contrib/dev/acpica/utmisc.c optional acpi contrib/dev/acpica/utmutex.c optional acpi contrib/dev/acpica/utobject.c optional acpi contrib/dev/acpica/utresrc.c optional acpi contrib/dev/acpica/utstate.c optional acpi contrib/dev/acpica/utxface.c optional acpi contrib/ipfilter/netinet/fil.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_auth.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_fil_freebsd.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_frag.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_log.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_proxy.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_state.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_lookup.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-error -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_pool.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_htable.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_sync.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/mlfk_ipl.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ngatm/netnatm/api/cc_conn.c optional ngatm_ccatm \ compile-with "${NORMAL_C_NOWERROR} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_data.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_dump.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_port.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_sig.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_user.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/unisap.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/straddr.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/unimsg_common.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/traffic.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_ie.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_msg.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_call.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_coord.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_party.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_print.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_reset.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_unimsgcpy.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_verify.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/pf/net/if_pflog.c optional pflog \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/if_pfsync.c optional pfsync \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_if.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_ioctl.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_norm.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_osfp.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_ruleset.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_subr.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/net/pf_table.c optional pf \ compile-with "${NORMAL_C} -I$S/contrib/pf" contrib/pf/netinet/in4_cksum.c optional pf inet crypto/blowfish/bf_ecb.c optional ipsec crypto/blowfish/bf_skey.c optional crypto | ipsec crypto/camellia/camellia.c optional crypto | ipsec crypto/camellia/camellia-api.c optional crypto | ipsec crypto/des/des_ecb.c optional crypto | ipsec | netsmb crypto/des/des_setkey.c optional crypto | ipsec | netsmb crypto/rc4/rc4.c optional netgraph_mppc_encryption | kgssapi crypto/rijndael/rijndael-alg-fst.c optional crypto | geom_bde | \ ipsec | random | wlan_ccmp crypto/rijndael/rijndael-api-fst.c optional geom_bde | random crypto/rijndael/rijndael-api.c optional crypto | ipsec | wlan_ccmp crypto/sha1.c optional carp | crypto | ipsec | \ netgraph_mppc_encryption | sctp crypto/sha2/sha2.c optional crypto | geom_bde | ipsec | random | \ sctp ddb/db_access.c optional ddb ddb/db_break.c optional ddb ddb/db_capture.c optional ddb ddb/db_command.c optional ddb ddb/db_examine.c optional ddb ddb/db_expr.c optional ddb ddb/db_input.c optional ddb ddb/db_lex.c optional ddb ddb/db_main.c optional ddb ddb/db_output.c optional ddb ddb/db_print.c optional ddb ddb/db_ps.c optional ddb ddb/db_run.c optional ddb ddb/db_script.c optional ddb ddb/db_sym.c optional ddb ddb/db_thread.c optional ddb ddb/db_textdump.c optional ddb ddb/db_variables.c optional ddb ddb/db_watch.c optional ddb ddb/db_write_cmd.c optional ddb #dev/dpt/dpt_control.c optional dpt dev/aac/aac.c optional aac dev/aac/aac_cam.c optional aacp aac dev/aac/aac_debug.c optional aac dev/aac/aac_disk.c optional aac dev/aac/aac_linux.c optional aac compat_linux dev/aac/aac_pci.c optional aac pci dev/acpi_support/acpi_aiboost.c optional acpi_aiboost acpi dev/acpi_support/acpi_asus.c optional acpi_asus acpi dev/acpi_support/acpi_fujitsu.c optional acpi_fujitsu acpi dev/acpi_support/acpi_ibm.c optional acpi_ibm acpi dev/acpi_support/acpi_panasonic.c optional acpi_panasonic acpi dev/acpi_support/acpi_sony.c optional acpi_sony acpi dev/acpi_support/acpi_toshiba.c optional acpi_toshiba acpi dev/acpica/Osd/OsdDebug.c optional acpi dev/acpica/Osd/OsdHardware.c optional acpi dev/acpica/Osd/OsdInterrupt.c optional acpi dev/acpica/Osd/OsdMemory.c optional acpi dev/acpica/Osd/OsdSchedule.c optional acpi dev/acpica/Osd/OsdStream.c optional acpi dev/acpica/Osd/OsdSynch.c optional acpi dev/acpica/Osd/OsdTable.c optional acpi dev/acpica/acpi.c optional acpi dev/acpica/acpi_acad.c optional acpi dev/acpica/acpi_battery.c optional acpi dev/acpica/acpi_button.c optional acpi dev/acpica/acpi_cmbat.c optional acpi dev/acpica/acpi_cpu.c optional acpi dev/acpica/acpi_ec.c optional acpi dev/acpica/acpi_hpet.c optional acpi dev/acpica/acpi_isab.c optional acpi isa dev/acpica/acpi_lid.c optional acpi dev/acpica/acpi_package.c optional acpi dev/acpica/acpi_pci.c optional acpi pci dev/acpica/acpi_pci_link.c optional acpi pci dev/acpica/acpi_pcib.c optional acpi pci dev/acpica/acpi_pcib_acpi.c optional acpi pci dev/acpica/acpi_pcib_pci.c optional acpi pci dev/acpica/acpi_perf.c optional acpi dev/acpica/acpi_powerres.c optional acpi dev/acpica/acpi_quirk.c optional acpi dev/acpica/acpi_resource.c optional acpi dev/acpica/acpi_smbat.c optional acpi dev/acpica/acpi_thermal.c optional acpi dev/acpica/acpi_throttle.c optional acpi dev/acpica/acpi_timer.c optional acpi dev/acpica/acpi_video.c optional acpi_video acpi dev/acpica/acpi_dock.c optional acpi_dock acpi dev/adlink/adlink.c optional adlink dev/advansys/adv_eisa.c optional adv eisa dev/advansys/adv_pci.c optional adv pci dev/advansys/advansys.c optional adv dev/advansys/advlib.c optional adv dev/advansys/advmcode.c optional adv dev/advansys/adw_pci.c optional adw pci dev/advansys/adwcam.c optional adw dev/advansys/adwlib.c optional adw dev/advansys/adwmcode.c optional adw dev/ae/if_ae.c optional ae pci dev/age/if_age.c optional age pci dev/agp/agp.c optional agp pci dev/agp/agp_if.m optional agp pci dev/aha/aha.c optional aha dev/aha/aha_isa.c optional aha isa dev/aha/aha_mca.c optional aha mca dev/ahb/ahb.c optional ahb eisa dev/aic/aic.c optional aic dev/aic/aic_pccard.c optional aic pccard dev/aic7xxx/ahc_eisa.c optional ahc eisa dev/aic7xxx/ahc_isa.c optional ahc isa dev/aic7xxx/ahc_pci.c optional ahc pci dev/aic7xxx/ahd_pci.c optional ahd pci dev/aic7xxx/aic7770.c optional ahc dev/aic7xxx/aic79xx.c optional ahd pci dev/aic7xxx/aic79xx_osm.c optional ahd pci dev/aic7xxx/aic79xx_pci.c optional ahd pci dev/aic7xxx/aic7xxx.c optional ahc dev/aic7xxx/aic7xxx_93cx6.c optional ahc dev/aic7xxx/aic7xxx_osm.c optional ahc dev/aic7xxx/aic7xxx_pci.c optional ahc pci dev/ale/if_ale.c optional ale pci dev/amd/amd.c optional amd dev/amr/amr.c optional amr dev/amr/amr_cam.c optional amrp amr dev/amr/amr_disk.c optional amr dev/amr/amr_linux.c optional amr compat_linux dev/amr/amr_pci.c optional amr pci dev/an/if_an.c optional an dev/an/if_an_isa.c optional an isa dev/an/if_an_pccard.c optional an pccard dev/an/if_an_pci.c optional an pci dev/asr/asr.c optional asr pci # dev/ata/ata_if.m optional ata | atacore dev/ata/ata-all.c optional ata | atacore dev/ata/ata-lowlevel.c optional ata | atacore dev/ata/ata-queue.c optional ata | atacore dev/ata/ata-card.c optional ata pccard | atapccard dev/ata/ata-cbus.c optional ata pc98 | atapc98 dev/ata/ata-isa.c optional ata isa | ataisa dev/ata/ata-pci.c optional ata pci | atapci dev/ata/ata-dma.c optional ata pci | atapci dev/ata/ata-sata.c optional ata pci | atapci dev/ata/chipsets/ata-ahci.c optional ata pci | ataahci | ataacerlabs | \ ataati | ataintel | atajmicron | atavia dev/ata/chipsets/ata-acard.c optional ata pci | ataacard dev/ata/chipsets/ata-acerlabs.c optional ata pci | ataacerlabs dev/ata/chipsets/ata-adaptec.c optional ata pci | ataadaptec dev/ata/chipsets/ata-amd.c optional ata pci | ataamd dev/ata/chipsets/ata-ati.c optional ata pci | ataati dev/ata/chipsets/ata-cenatek.c optional ata pci | atacenatek dev/ata/chipsets/ata-cypress.c optional ata pci | atacypress dev/ata/chipsets/ata-cyrix.c optional ata pci | atacyrix dev/ata/chipsets/ata-highpoint.c optional ata pci | atahighpoint dev/ata/chipsets/ata-intel.c optional ata pci | ataintel dev/ata/chipsets/ata-ite.c optional ata pci | ataite dev/ata/chipsets/ata-jmicron.c optional ata pci | atajmicron dev/ata/chipsets/ata-marvell.c optional ata pci | atamarvell dev/ata/chipsets/ata-micron.c optional ata pci | atamicron dev/ata/chipsets/ata-national.c optional ata pci | atanational dev/ata/chipsets/ata-netcell.c optional ata pci | atanetcell dev/ata/chipsets/ata-nvidia.c optional ata pci | atanvidia dev/ata/chipsets/ata-promise.c optional ata pci | atapromise dev/ata/chipsets/ata-serverworks.c optional ata pci | ataserverworks dev/ata/chipsets/ata-siliconimage.c optional ata pci | atasiliconimage dev/ata/chipsets/ata-sis.c optional ata pci | atasis dev/ata/chipsets/ata-via.c optional ata pci | atavia dev/ata/ata-disk.c optional atadisk dev/ata/ata-raid.c optional ataraid dev/ata/ata-usb.c optional atausb usb dev/ata/atapi-cd.c optional atapicd dev/ata/atapi-fd.c optional atapifd dev/ata/atapi-tape.c optional atapist dev/ata/atapi-cam.c optional atapicam # dev/ath/if_ath.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_pci.c optional ath pci \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ah_osdep.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/ath_hal/ah.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v1.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v3.c optional ath_hal | ath_ar5211 | ath_ar5212 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v14.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_regdomain.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # ar5210 dev/ath/ath_hal/ar5210/ar5210_attach.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_beacon.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_interrupts.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_keycache.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_misc.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_phy.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_power.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_recv.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_reset.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_xmit.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5211 dev/ath/ath_hal/ar5211/ar5211_attach.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_beacon.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_interrupts.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_keycache.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_misc.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_phy.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_power.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_recv.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_reset.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_xmit.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5212 dev/ath/ath_hal/ar5212/ar5212_ani.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_attach.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_beacon.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_eeprom.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_gpio.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_interrupts.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_keycache.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_misc.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_phy.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_power.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_recv.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_reset.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_rfgain.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_xmit.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5416 (depends on ar5212) dev/ath/ath_hal/ar5416/ar5416_ani.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_attach.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_beacon.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_iq.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcgain.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcdc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_eeprom.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_gpio.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_interrupts.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_keycache.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_misc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_phy.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_power.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_recv.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_reset.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_xmit.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9160 (depends on ar5416) dev/ath/ath_hal/ar5416/ar9160_attach.c optional ath_hal | ath_ar9160 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9280 (depends on ar5416) dev/ath/ath_hal/ar5416/ar9280_attach.c optional ath_hal | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # rf backends dev/ath/ath_hal/ar5212/ar2316.c optional ath_rf2316 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2317.c optional ath_rf2317 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2413.c optional ath_hal | ath_rf2413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2425.c optional ath_hal | ath_rf2425 | ath_rf2417 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5111.c optional ath_hal | ath_rf5111 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5112.c optional ath_hal | ath_rf5112 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5413.c optional ath_hal | ath_rf5413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar2133.c optional ath_hal | ath_ar5416 | ath_ar9160 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar9280.c optional ath_hal | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ath rate control algorithms dev/ath/ath_rate/amrr/amrr.c optional ath_rate_amrr \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/onoe/onoe.c optional ath_rate_onoe \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/sample/sample.c optional ath_rate_sample \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/bce/if_bce.c optional bce dev/bfe/if_bfe.c optional bfe dev/bge/if_bge.c optional bge dev/bktr/bktr_audio.c optional bktr pci dev/bktr/bktr_card.c optional bktr pci dev/bktr/bktr_core.c optional bktr pci dev/bktr/bktr_i2c.c optional bktr pci smbus dev/bktr/bktr_os.c optional bktr pci dev/bktr/bktr_tuner.c optional bktr pci dev/bktr/msp34xx.c optional bktr pci dev/buslogic/bt.c optional bt dev/buslogic/bt_eisa.c optional bt eisa dev/buslogic/bt_isa.c optional bt isa dev/buslogic/bt_mca.c optional bt mca dev/buslogic/bt_pci.c optional bt pci dev/bwi/bwimac.c optional bwi dev/bwi/bwiphy.c optional bwi dev/bwi/bwirf.c optional bwi dev/bwi/if_bwi.c optional bwi dev/bwi/if_bwi_pci.c optional bwi pci dev/cardbus/cardbus.c optional cardbus dev/cardbus/cardbus_cis.c optional cardbus dev/cardbus/cardbus_device.c optional cardbus dev/cfi/cfi_core.c optional cfi dev/cfi/cfi_dev.c optional cfi dev/cfi/cfi_disk.c optional cfid dev/ciss/ciss.c optional ciss dev/cm/smc90cx6.c optional cm dev/cmx/cmx.c optional cmx dev/cmx/cmx_pccard.c optional cmx pccard dev/cpufreq/ichss.c optional cpufreq dev/cs/if_cs.c optional cs dev/cs/if_cs_isa.c optional cs isa dev/cs/if_cs_pccard.c optional cs pccard dev/cxgb/cxgb_main.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_offload.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_sge.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_multiq.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mc5.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc7323.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc8211.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_ael1002.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mv88e1xxx.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_xgmac.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_t3_hw.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_tn1010.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/sys/uipc_mvec.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/sys/cxgb_support.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_t3fw.c optional cxgb cxgb_t3fw \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cy/cy.c optional cy dev/cy/cy_isa.c optional cy isa dev/cy/cy_pci.c optional cy pci dev/dc/if_dc.c optional dc pci dev/dc/dcphy.c optional dc pci dev/dc/pnphy.c optional dc pci dev/dcons/dcons.c optional dcons dev/dcons/dcons_crom.c optional dcons_crom dev/dcons/dcons_os.c optional dcons dev/de/if_de.c optional de pci dev/digi/CX.c optional digi_CX dev/digi/CX_PCI.c optional digi_CX_PCI dev/digi/EPCX.c optional digi_EPCX dev/digi/EPCX_PCI.c optional digi_EPCX_PCI dev/digi/Xe.c optional digi_Xe dev/digi/Xem.c optional digi_Xem dev/digi/Xr.c optional digi_Xr dev/digi/digi.c optional digi dev/digi/digi_isa.c optional digi isa dev/digi/digi_pci.c optional digi pci dev/dpt/dpt_eisa.c optional dpt eisa dev/dpt/dpt_pci.c optional dpt pci dev/dpt/dpt_scsi.c optional dpt dev/drm/ati_pcigart.c optional drm dev/drm/drm_agpsupport.c optional drm dev/drm/drm_auth.c optional drm dev/drm/drm_bufs.c optional drm dev/drm/drm_context.c optional drm dev/drm/drm_dma.c optional drm dev/drm/drm_drawable.c optional drm dev/drm/drm_drv.c optional drm dev/drm/drm_fops.c optional drm dev/drm/drm_ioctl.c optional drm dev/drm/drm_irq.c optional drm dev/drm/drm_lock.c optional drm dev/drm/drm_memory.c optional drm dev/drm/drm_pci.c optional drm dev/drm/drm_scatter.c optional drm dev/drm/drm_sysctl.c optional drm dev/drm/drm_vm.c optional drm dev/drm/i915_dma.c optional i915drm dev/drm/i915_drv.c optional i915drm dev/drm/i915_irq.c optional i915drm dev/drm/i915_mem.c optional i915drm dev/drm/i915_suspend.c optional i915drm dev/drm/mach64_dma.c optional mach64drm dev/drm/mach64_drv.c optional mach64drm dev/drm/mach64_irq.c optional mach64drm dev/drm/mach64_state.c optional mach64drm dev/drm/mga_dma.c optional mgadrm dev/drm/mga_drv.c optional mgadrm dev/drm/mga_irq.c optional mgadrm dev/drm/mga_state.c optional mgadrm \ compile-with "${NORMAL_C} -finline-limit=13500" dev/drm/mga_warp.c optional mgadrm dev/drm/r128_cce.c optional r128drm dev/drm/r128_drv.c optional r128drm dev/drm/r128_irq.c optional r128drm dev/drm/r128_state.c optional r128drm \ compile-with "${NORMAL_C} -finline-limit=13500" dev/drm/r300_cmdbuf.c optional radeondrm dev/drm/r600_cp.c optional radeondrm dev/drm/radeon_cp.c optional radeondrm dev/drm/radeon_drv.c optional radeondrm dev/drm/radeon_irq.c optional radeondrm dev/drm/radeon_mem.c optional radeondrm dev/drm/radeon_state.c optional radeondrm dev/drm/savage_bci.c optional savagedrm dev/drm/savage_drv.c optional savagedrm dev/drm/savage_state.c optional savagedrm dev/drm/sis_drv.c optional sisdrm dev/drm/sis_ds.c optional sisdrm dev/drm/sis_mm.c optional sisdrm dev/drm/tdfx_drv.c optional tdfxdrm dev/ed/if_ed.c optional ed dev/ed/if_ed_novell.c optional ed dev/ed/if_ed_rtl80x9.c optional ed dev/ed/if_ed_pccard.c optional ed pccard dev/ed/if_ed_pci.c optional ed pci dev/eisa/eisa_if.m standard dev/eisa/eisaconf.c optional eisa dev/e1000/if_em.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/if_igb.c optional igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_80003es2lan.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82540.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82541.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82542.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82543.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82571.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82575.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/igb" dev/e1000/e1000_ich8lan.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_api.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mac.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_manage.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_nvm.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_phy.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_osdep.c optional em | igb \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/et/if_et.c optional et dev/en/if_en_pci.c optional en pci dev/en/midway.c optional en dev/ep/if_ep.c optional ep dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep pccard dev/esp/ncr53c9x.c optional esp dev/ex/if_ex.c optional ex dev/ex/if_ex_isa.c optional ex isa dev/ex/if_ex_pccard.c optional ex pccard dev/exca/exca.c optional cbb dev/fatm/if_fatm.c optional fatm pci dev/fb/splash.c optional splash dev/fe/if_fe.c optional fe dev/fe/if_fe_pccard.c optional fe pccard dev/firewire/firewire.c optional firewire dev/firewire/fwcrom.c optional firewire dev/firewire/fwdev.c optional firewire dev/firewire/fwdma.c optional firewire dev/firewire/fwmem.c optional firewire dev/firewire/fwohci.c optional firewire dev/firewire/fwohci_pci.c optional firewire pci dev/firewire/if_fwe.c optional fwe dev/firewire/if_fwip.c optional fwip dev/firewire/sbp.c optional sbp dev/firewire/sbp_targ.c optional sbp_targ dev/flash/at45d.c optional at45d dev/fxp/if_fxp.c optional fxp dev/gem/if_gem.c optional gem dev/gem/if_gem_pci.c optional gem pci dev/hatm/if_hatm.c optional hatm pci dev/hatm/if_hatm_intr.c optional hatm pci dev/hatm/if_hatm_ioctl.c optional hatm pci dev/hatm/if_hatm_rx.c optional hatm pci dev/hatm/if_hatm_tx.c optional hatm pci dev/hifn/hifn7751.c optional hifn dev/hme/if_hme.c optional hme dev/hme/if_hme_pci.c optional hme pci dev/hme/if_hme_sbus.c optional hme sbus dev/hptiop/hptiop.c optional hptiop scbus dev/hwpmc/hwpmc_logging.c optional hwpmc dev/hwpmc/hwpmc_mod.c optional hwpmc dev/ichsmb/ichsmb.c optional ichsmb dev/ichsmb/ichsmb_pci.c optional ichsmb pci dev/ida/ida.c optional ida dev/ida/ida_disk.c optional ida dev/ida/ida_eisa.c optional ida eisa dev/ida/ida_pci.c optional ida pci dev/ie/if_ie.c optional ie isa nowerror dev/ie/if_ie_isa.c optional ie isa dev/ieee488/ibfoo.c optional pcii | tnt4882 dev/ieee488/pcii.c optional pcii dev/ieee488/tnt4882.c optional tnt4882 dev/ieee488/upd7210.c optional pcii | tnt4882 dev/iicbus/ad7418.c optional ad7418 dev/iicbus/ds133x.c optional ds133x dev/iicbus/ds1672.c optional ds1672 dev/iicbus/icee.c optional icee dev/iicbus/if_ic.c optional ic dev/iicbus/iic.c optional iic dev/iicbus/iicbb.c optional iicbb dev/iicbus/iicbb_if.m optional iicbb dev/iicbus/iicbus.c optional iicbus dev/iicbus/iicbus_if.m optional iicbus dev/iicbus/iiconf.c optional iicbus dev/iicbus/iicsmb.c optional iicsmb \ dependency "iicbus_if.h" dev/iir/iir.c optional iir dev/iir/iir_ctrl.c optional iir dev/iir/iir_pci.c optional iir pci dev/ips/ips.c optional ips dev/ips/ips_commands.c optional ips dev/ips/ips_disk.c optional ips dev/ips/ips_ioctl.c optional ips dev/ips/ips_pci.c optional ips pci dev/ipw/if_ipw.c optional ipw ipwbssfw.c optional ipwbssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_bss.fw:ipw_bss:130 -lintel_ipw -mipw_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwbssfw.c" ipw_bss.fwo optional ipwbssfw | ipwfw \ dependency "ipw_bss.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} ipw_bss.fw" \ no-implicit-rule \ clean "ipw_bss.fwo" ipw_bss.fw optional ipwbssfw | ipwfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ipw/ipw2100-1.3.fw.uu" \ no-obj no-implicit-rule \ clean "ipw_bss.fw" ipwibssfw.c optional ipwibssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_ibss.fw:ipw_ibss:130 -lintel_ipw -mipw_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwibssfw.c" ipw_ibss.fwo optional ipwibssfw | ipwfw \ dependency "ipw_ibss.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} ipw_ibss.fw" \ no-implicit-rule \ clean "ipw_ibss.fwo" ipw_ibss.fw optional ipwibssfw | ipwfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ipw/ipw2100-1.3-i.fw.uu" \ no-obj no-implicit-rule \ clean "ipw_ibss.fw" ipwmonitorfw.c optional ipwmonitorfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_monitor.fw:ipw_monitor:130 -lintel_ipw -mipw_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwmonitorfw.c" ipw_monitor.fwo optional ipwmonitorfw | ipwfw \ dependency "ipw_monitor.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} ipw_monitor.fw" \ no-implicit-rule \ clean "ipw_monitor.fwo" ipw_monitor.fw optional ipwmonitorfw | ipwfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ipw/ipw2100-1.3-p.fw.uu" \ no-obj no-implicit-rule \ clean "ipw_monitor.fw" dev/iscsi/initiator/iscsi.c optional iscsi_initiator scbus dev/iscsi/initiator/iscsi_subr.c optional iscsi_initiator scbus dev/iscsi/initiator/isc_cam.c optional iscsi_initiator scbus dev/iscsi/initiator/isc_soc.c optional iscsi_initiator scbus dev/iscsi/initiator/isc_sm.c optional iscsi_initiator scbus dev/iscsi/initiator/isc_subr.c optional iscsi_initiator scbus dev/isp/isp.c optional isp dev/isp/isp_freebsd.c optional isp dev/isp/isp_library.c optional isp dev/isp/isp_pci.c optional isp pci dev/isp/isp_sbus.c optional isp sbus dev/isp/isp_target.c optional isp dev/ispfw/ispfw.c optional ispfw dev/iwi/if_iwi.c optional iwi iwibssfw.c optional iwibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_bss.fw:iwi_bss:300 -lintel_iwi -miwi_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwibssfw.c" iwi_bss.fwo optional iwibssfw | iwifw \ dependency "iwi_bss.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} iwi_bss.fw" \ no-implicit-rule \ clean "iwi_bss.fwo" iwi_bss.fw optional iwibssfw | iwifw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/iwi/ipw2200-bss.fw.uu" \ no-obj no-implicit-rule \ clean "iwi_bss.fw" iwiibssfw.c optional iwiibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_ibss.fw:iwi_ibss:300 -lintel_iwi -miwi_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwiibssfw.c" iwi_ibss.fwo optional iwiibssfw | iwifw \ dependency "iwi_ibss.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} iwi_ibss.fw" \ no-implicit-rule \ clean "iwi_ibss.fwo" iwi_ibss.fw optional iwiibssfw | iwifw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/iwi/ipw2200-ibss.fw.uu" \ no-obj no-implicit-rule \ clean "iwi_ibss.fw" iwimonitorfw.c optional iwimonitorfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_monitor.fw:iwi_monitor:300 -lintel_iwi -miwi_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwimonitorfw.c" iwi_monitor.fwo optional iwimonitorfw | iwifw \ dependency "iwi_monitor.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} iwi_monitor.fw" \ no-implicit-rule \ clean "iwi_monitor.fwo" iwi_monitor.fw optional iwimonitorfw | iwifw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/iwi/ipw2200-sniffer.fw.uu" \ no-obj no-implicit-rule \ clean "iwi_monitor.fw" dev/iwn/if_iwn.c optional iwn iwnfw.c optional iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn.fw:iwnfw:44417 -lintel_iwn -miwn -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwnfw.c" iwnfw.fwo optional iwnfw \ dependency "iwn.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} iwn.fw" \ no-implicit-rule \ clean "iwnfw.fwo" iwn.fw optional iwnfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/iwn/iwlwifi-4965-4.44.17.fw.uu" \ no-obj no-implicit-rule \ clean "iwn.fw" dev/ixgb/if_ixgb.c optional ixgb dev/ixgb/ixgb_ee.c optional ixgb dev/ixgb/ixgb_hw.c optional ixgb dev/ixgbe/ixgbe.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_phy.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_api.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_common.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82598.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82599.c optional ixgbe \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/jme/if_jme.c optional jme pci dev/joy/joy.c optional joy dev/joy/joy_isa.c optional joy isa dev/joy/joy_pccard.c optional joy pccard dev/kbdmux/kbdmux.c optional kbdmux dev/ksyms/ksyms.c optional ksyms dev/le/am7990.c optional le dev/le/am79900.c optional le dev/le/if_le_pci.c optional le pci dev/le/lance.c optional le dev/led/led.c standard dev/lge/if_lge.c optional lge dev/lmc/if_lmc.c optional lmc dev/malo/if_malo.c optional malo dev/malo/if_malohal.c optional malo dev/malo/if_malo_pci.c optional malo pci dev/mc146818/mc146818.c optional mc146818 dev/mca/mca_bus.c optional mca dev/mcd/mcd.c optional mcd isa nowerror dev/mcd/mcd_isa.c optional mcd isa nowerror dev/md/md.c optional md dev/mem/memdev.c optional mem dev/mfi/mfi.c optional mfi dev/mfi/mfi_debug.c optional mfi dev/mfi/mfi_pci.c optional mfi pci dev/mfi/mfi_disk.c optional mfi dev/mfi/mfi_linux.c optional mfi compat_linux dev/mfi/mfi_cam.c optional mfip scbus dev/mii/acphy.c optional miibus | acphy dev/mii/amphy.c optional miibus | amphy dev/mii/atphy.c optional miibus | atphy dev/mii/axphy.c optional miibus | axphy dev/mii/bmtphy.c optional miibus | bmtphy dev/mii/brgphy.c optional miibus | brgphy dev/mii/ciphy.c optional miibus | ciphy dev/mii/e1000phy.c optional miibus | e1000phy # XXX only xl cards? dev/mii/exphy.c optional miibus | exphy dev/mii/gentbi.c optional miibus | gentbi dev/mii/icsphy.c optional miibus | icsphy # XXX only fxp cards? dev/mii/inphy.c optional miibus | inphy dev/mii/ip1000phy.c optional miibus | ip1000phy dev/mii/jmphy.c optional miibus | jmphy dev/mii/lxtphy.c optional miibus | lxtphy dev/mii/mii.c optional miibus | mii dev/mii/mii_physubr.c optional miibus | mii dev/mii/miibus_if.m optional miibus | mii dev/mii/mlphy.c optional miibus | mlphy dev/mii/nsgphy.c optional miibus | nsgphy dev/mii/nsphy.c optional miibus | nsphy dev/mii/nsphyter.c optional miibus | nsphyter dev/mii/pnaphy.c optional miibus | pnaphy dev/mii/qsphy.c optional miibus | qsphy dev/mii/rgephy.c optional miibus | rgephy dev/mii/rlphy.c optional miibus | rlphy dev/mii/rlswitch.c optional rlswitch # XXX rue only? dev/mii/ruephy.c optional miibus | ruephy dev/mii/smcphy.c optional miibus | smcphy dev/mii/tdkphy.c optional miibus | tdkphy dev/mii/tlphy.c optional miibus | tlphy dev/mii/truephy.c optional miibus | truephy dev/mii/ukphy.c optional miibus | mii dev/mii/ukphy_subr.c optional miibus | mii dev/mii/xmphy.c optional miibus | xmphy dev/mk48txx/mk48txx.c optional mk48txx dev/mlx/mlx.c optional mlx dev/mlx/mlx_disk.c optional mlx dev/mlx/mlx_pci.c optional mlx pci dev/mly/mly.c optional mly dev/mmc/mmc.c optional mmc dev/mmc/mmcbr_if.m standard dev/mmc/mmcbus_if.m standard dev/mmc/mmcsd.c optional mmcsd dev/mn/if_mn.c optional mn pci dev/mpt/mpt.c optional mpt dev/mpt/mpt_cam.c optional mpt dev/mpt/mpt_debug.c optional mpt dev/mpt/mpt_pci.c optional mpt pci dev/mpt/mpt_raid.c optional mpt dev/mpt/mpt_user.c optional mpt dev/msk/if_msk.c optional msk dev/mxge/if_mxge.c optional mxge pci dev/mxge/mxge_lro.c optional mxge pci dev/mxge/mxge_eth_z8e.c optional mxge pci dev/mxge/mxge_ethp_z8e.c optional mxge pci dev/mxge/mxge_rss_eth_z8e.c optional mxge pci dev/mxge/mxge_rss_ethp_z8e.c optional mxge pci dev/my/if_my.c optional my dev/ncv/ncr53c500.c optional ncv dev/ncv/ncr53c500_pccard.c optional ncv pccard dev/nge/if_nge.c optional nge dev/nxge/if_nxge.c optional nxge dev/nxge/xgehal/xgehal-device.c optional nxge dev/nxge/xgehal/xgehal-mm.c optional nxge dev/nxge/xgehal/xge-queue.c optional nxge dev/nxge/xgehal/xgehal-driver.c optional nxge dev/nxge/xgehal/xgehal-ring.c optional nxge dev/nxge/xgehal/xgehal-channel.c optional nxge dev/nxge/xgehal/xgehal-fifo.c optional nxge dev/nxge/xgehal/xgehal-stats.c optional nxge dev/nxge/xgehal/xgehal-config.c optional nxge dev/nxge/xgehal/xgehal-mgmt.c optional nxge dev/nmdm/nmdm.c optional nmdm dev/nsp/nsp.c optional nsp dev/nsp/nsp_pccard.c optional nsp pccard dev/null/null.c standard dev/patm/if_patm.c optional patm pci dev/patm/if_patm_attach.c optional patm pci dev/patm/if_patm_intr.c optional patm pci dev/patm/if_patm_ioctl.c optional patm pci dev/patm/if_patm_rtables.c optional patm pci dev/patm/if_patm_rx.c optional patm pci dev/patm/if_patm_tx.c optional patm pci dev/pbio/pbio.c optional pbio isa dev/pccard/card_if.m standard dev/pccard/pccard.c optional pccard dev/pccard/pccard_cis.c optional pccard dev/pccard/pccard_cis_quirks.c optional pccard dev/pccard/pccard_device.c optional pccard dev/pccard/power_if.m standard dev/pccbb/pccbb.c optional cbb dev/pccbb/pccbb_isa.c optional cbb isa dev/pccbb/pccbb_pci.c optional cbb pci dev/pcf/pcf.c optional pcf dev/pci/eisa_pci.c optional pci eisa dev/pci/fixup_pci.c optional pci dev/pci/hostb_pci.c optional pci dev/pci/ignore_pci.c optional pci dev/pci/isa_pci.c optional pci isa dev/pci/pci.c optional pci dev/pci/pci_if.m standard dev/pci/pci_pci.c optional pci dev/pci/pci_user.c optional pci dev/pci/pcib_if.m standard dev/pci/vga_pci.c optional pci dev/pcn/if_pcn.c optional pcn pci dev/pdq/if_fea.c optional fea eisa dev/pdq/if_fpa.c optional fpa pci dev/pdq/pdq.c optional nowerror fea eisa | fpa pci dev/pdq/pdq_ifsubr.c optional nowerror fea eisa | fpa pci dev/ppbus/if_plip.c optional plip dev/ppbus/immio.c optional vpo dev/ppbus/lpbb.c optional lpbb dev/ppbus/lpt.c optional lpt dev/ppbus/pcfclock.c optional pcfclock dev/ppbus/ppb_1284.c optional ppbus dev/ppbus/ppb_base.c optional ppbus dev/ppbus/ppb_msq.c optional ppbus dev/ppbus/ppbconf.c optional ppbus dev/ppbus/ppbus_if.m optional ppbus dev/ppbus/ppi.c optional ppi dev/ppbus/pps.c optional pps dev/ppbus/vpo.c optional vpo dev/ppbus/vpoio.c optional vpo dev/ppc/ppc.c optional ppc dev/ppc/ppc_acpi.c optional ppc acpi dev/ppc/ppc_isa.c optional ppc isa dev/ppc/ppc_pci.c optional ppc pci dev/ppc/ppc_puc.c optional ppc puc dev/pst/pst-iop.c optional pst dev/pst/pst-pci.c optional pst pci dev/pst/pst-raid.c optional pst dev/puc/puc.c optional puc dev/puc/puc_cfg.c optional puc dev/puc/puc_pccard.c optional puc pccard dev/puc/puc_pci.c optional puc pci dev/puc/pucdata.c optional puc pci dev/quicc/quicc_core.c optional quicc dev/ral/rt2560.c optional ral dev/ral/rt2661.c optional ral dev/ral/if_ral_pci.c optional ral pci rt2561fw.c optional rt2561fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561.fw:rt2561fw -mrt2561 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561fw.c" rt2561fw.fwo optional rt2561fw | ralfw \ dependency "rt2561.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} rt2561.fw" \ no-implicit-rule \ clean "rt2561fw.fwo" rt2561.fw optional rt2561fw | ralfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ral/rt2561.fw.uu" \ no-obj no-implicit-rule \ clean "rt2561.fw" rt2561sfw.c optional rt2561sfw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561s.fw:rt2561sfw -mrt2561s -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561sfw.c" rt2561sfw.fwo optional rt2561sfw | ralfw \ dependency "rt2561s.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} rt2561s.fw" \ no-implicit-rule \ clean "rt2561sfw.fwo" rt2561s.fw optional rt2561sfw | ralfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ral/rt2561s.fw.uu" \ no-obj no-implicit-rule \ clean "rt2561s.fw" rt2661fw.c optional rt2661fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2661.fw:rt2661fw -mrt2661 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2661fw.c" rt2661fw.fwo optional rt2661fw | ralfw \ dependency "rt2661.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} rt2661.fw" \ no-implicit-rule \ clean "rt2661fw.fwo" rt2661.fw optional rt2661fw | ralfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ral/rt2661.fw.uu" \ no-obj no-implicit-rule \ clean "rt2661.fw" rt2860fw.c optional rt2860fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2860.fw:rt2860fw -mrt2860 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2860fw.c" rt2860fw.fwo optional rt2860fw | ralfw \ dependency "rt2860.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} rt2860.fw" \ no-implicit-rule \ clean "rt2860fw.fwo" rt2860.fw optional rt2860fw | ralfw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/ral/rt2860.fw.uu" \ no-obj no-implicit-rule \ clean "rt2860.fw" dev/random/harvest.c standard dev/random/hash.c optional random dev/random/probe.c optional random dev/random/randomdev.c optional random dev/random/randomdev_soft.c optional random dev/random/yarrow.c optional random dev/rc/rc.c optional rc dev/re/if_re.c optional re dev/rndtest/rndtest.c optional rndtest dev/rp/rp.c optional rp dev/rp/rp_isa.c optional rp isa dev/rp/rp_pci.c optional rp pci dev/safe/safe.c optional safe dev/scc/scc_if.m optional scc dev/scc/scc_bfe_ebus.c optional scc ebus dev/scc/scc_bfe_quicc.c optional scc quicc dev/scc/scc_bfe_sbus.c optional scc fhc | scc sbus dev/scc/scc_core.c optional scc dev/scc/scc_dev_quicc.c optional scc quicc dev/scc/scc_dev_sab82532.c optional scc dev/scc/scc_dev_z8530.c optional scc dev/scd/scd.c optional scd isa dev/scd/scd_isa.c optional scd isa dev/sdhci/sdhci.c optional sdhci pci dev/sf/if_sf.c optional sf pci dev/si/si.c optional si dev/si/si2_z280.c optional si dev/si/si3_t225.c optional si dev/si/si_eisa.c optional si eisa dev/si/si_isa.c optional si isa dev/si/si_pci.c optional si pci dev/sis/if_sis.c optional sis pci dev/sk/if_sk.c optional sk pci dev/smbus/smb.c optional smb dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smbus_if.m optional smbus dev/smc/if_smc.c optional smc dev/sn/if_sn.c optional sn dev/sn/if_sn_isa.c optional sn isa dev/sn/if_sn_pccard.c optional sn pccard dev/snp/snp.c optional snp dev/sound/clone.c optional sound dev/sound/unit.c optional sound dev/sound/isa/ad1816.c optional snd_ad1816 isa dev/sound/isa/ess.c optional snd_ess isa dev/sound/isa/gusc.c optional snd_gusc isa dev/sound/isa/mss.c optional snd_mss isa dev/sound/isa/sb16.c optional snd_sb16 isa dev/sound/isa/sb8.c optional snd_sb8 isa dev/sound/isa/sbc.c optional snd_sbc isa dev/sound/isa/sndbuf_dma.c optional sound isa dev/sound/pci/als4000.c optional snd_als4000 pci dev/sound/pci/atiixp.c optional snd_atiixp pci dev/sound/pci/cmi.c optional snd_cmi pci dev/sound/pci/cs4281.c optional snd_cs4281 pci dev/sound/pci/csa.c optional snd_csa pci \ warning "kernel contains GPL contaminated csaimg.h header" dev/sound/pci/csapcm.c optional snd_csa pci dev/sound/pci/ds1.c optional snd_ds1 pci dev/sound/pci/emu10k1.c optional snd_emu10k1 pci \ dependency "emu10k1-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10k1 headers" dev/sound/pci/emu10kx.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ dependency "p16v-alsa%diked.h" \ dependency "p17v-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/emu10kx-pcm.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ dependency "p16v-alsa%diked.h" \ dependency "p17v-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/emu10kx-midi.c optional snd_emu10kx pci \ dependency "emu10k1-alsa%diked.h" \ warning "kernel contains GPL contaminated emu10kx headers" dev/sound/pci/envy24.c optional snd_envy24 pci dev/sound/pci/envy24ht.c optional snd_envy24ht pci dev/sound/pci/es137x.c optional snd_es137x pci dev/sound/pci/fm801.c optional snd_fm801 pci dev/sound/pci/ich.c optional snd_ich pci dev/sound/pci/maestro.c optional snd_maestro pci dev/sound/pci/maestro3.c optional snd_maestro3 pci \ warning "kernel contains GPL contaminated maestro3 headers" dev/sound/pci/neomagic.c optional snd_neomagic pci dev/sound/pci/solo.c optional snd_solo pci dev/sound/pci/spicds.c optional snd_spicds pci dev/sound/pci/t4dwave.c optional snd_t4dwave pci dev/sound/pci/via8233.c optional snd_via8233 pci dev/sound/pci/via82c686.c optional snd_via82c686 pci dev/sound/pci/vibes.c optional snd_vibes pci dev/sound/pci/hda/hdac.c optional snd_hda pci dev/sound/pcm/ac97.c optional sound dev/sound/pcm/ac97_if.m optional sound dev/sound/pcm/ac97_patch.c optional sound dev/sound/pcm/buffer.c optional sound dev/sound/pcm/channel.c optional sound dev/sound/pcm/channel_if.m optional sound dev/sound/pcm/dsp.c optional sound dev/sound/pcm/fake.c optional sound dev/sound/pcm/feeder.c optional sound dev/sound/pcm/feeder_fmt.c optional sound dev/sound/pcm/feeder_if.m optional sound dev/sound/pcm/feeder_rate.c optional sound dev/sound/pcm/feeder_volume.c optional sound dev/sound/pcm/mixer.c optional sound dev/sound/pcm/mixer_if.m optional sound dev/sound/pcm/sndstat.c optional sound dev/sound/pcm/sound.c optional sound dev/sound/pcm/vchan.c optional sound dev/sound/usb/uaudio.c optional snd_uaudio usb dev/sound/usb/uaudio_pcm.c optional snd_uaudio usb dev/sound/midi/midi.c optional sound dev/sound/midi/mpu401.c optional sound dev/sound/midi/mpu_if.m optional sound dev/sound/midi/mpufoi_if.m optional sound dev/sound/midi/sequencer.c optional sound dev/sound/midi/synth_if.m optional sound dev/spibus/spibus.c optional spibus \ dependency "spibus_if.h" dev/spibus/spibus_if.m optional spibus dev/ste/if_ste.c optional ste pci dev/stg/tmc18c30.c optional stg dev/stg/tmc18c30_isa.c optional stg isa dev/stg/tmc18c30_pccard.c optional stg pccard dev/stg/tmc18c30_pci.c optional stg pci dev/stg/tmc18c30_subr.c optional stg dev/stge/if_stge.c optional stge dev/streams/streams.c optional streams dev/sym/sym_hipd.c optional sym \ dependency "$S/dev/sym/sym_{conf,defs}.h" dev/syscons/blank/blank_saver.c optional blank_saver dev/syscons/daemon/daemon_saver.c optional daemon_saver dev/syscons/dragon/dragon_saver.c optional dragon_saver dev/syscons/fade/fade_saver.c optional fade_saver dev/syscons/fire/fire_saver.c optional fire_saver dev/syscons/green/green_saver.c optional green_saver dev/syscons/logo/logo.c optional logo_saver dev/syscons/logo/logo_saver.c optional logo_saver dev/syscons/rain/rain_saver.c optional rain_saver dev/syscons/schistory.c optional sc dev/syscons/scmouse.c optional sc dev/syscons/scterm.c optional sc dev/syscons/scvidctl.c optional sc dev/syscons/snake/snake_saver.c optional snake_saver dev/syscons/star/star_saver.c optional star_saver dev/syscons/syscons.c optional sc dev/syscons/sysmouse.c optional sc dev/syscons/warp/warp_saver.c optional warp_saver dev/tdfx/tdfx_linux.c optional tdfx_linux tdfx compat_linux dev/tdfx/tdfx_pci.c optional tdfx pci dev/ti/if_ti.c optional ti pci dev/tl/if_tl.c optional tl pci dev/trm/trm.c optional trm dev/twa/tw_cl_init.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_intr.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_io.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_misc.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_cam.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_freebsd.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twe/twe.c optional twe dev/twe/twe_freebsd.c optional twe dev/tx/if_tx.c optional tx dev/txp/if_txp.c optional txp dev/uart/uart_bus_acpi.c optional uart acpi #dev/uart/uart_bus_cbus.c optional uart cbus dev/uart/uart_bus_ebus.c optional uart ebus dev/uart/uart_bus_isa.c optional uart isa dev/uart/uart_bus_pccard.c optional uart pccard dev/uart/uart_bus_pci.c optional uart pci dev/uart/uart_bus_puc.c optional uart puc dev/uart/uart_bus_scc.c optional uart scc dev/uart/uart_core.c optional uart dev/uart/uart_dbg.c optional uart gdb dev/uart/uart_dev_ns8250.c optional uart uart_ns8250 dev/uart/uart_dev_quicc.c optional uart quicc dev/uart/uart_dev_sab82532.c optional uart uart_sab82532 dev/uart/uart_dev_sab82532.c optional uart scc dev/uart/uart_dev_z8530.c optional uart uart_z8530 dev/uart/uart_dev_z8530.c optional uart scc dev/uart/uart_if.m optional uart dev/uart/uart_subr.c optional uart dev/uart/uart_tty.c optional uart dev/ubsec/ubsec.c optional ubsec # # USB controller drivers # dev/usb/controller/at91dci.c optional at91dci dev/usb/controller/at91dci_atmelarm.c optional at91dci at91rm9200 dev/usb/controller/musb_otg.c optional musb dev/usb/controller/musb_otg_atmelarm.c optional musb at91rm9200 dev/usb/controller/ehci.c optional ehci dev/usb/controller/ehci_pci.c optional ehci pci dev/usb/controller/ohci.c optional ohci dev/usb/controller/ohci_atmelarm.c optional ohci at91rm9200 dev/usb/controller/ohci_pci.c optional ohci pci dev/usb/controller/uhci.c optional uhci dev/usb/controller/uhci_pci.c optional uhci pci dev/usb/controller/uss820dci.c optional uss820dci dev/usb/controller/uss820dci_atmelarm.c optional uss820dci at91rm9200 dev/usb/controller/usb_controller.c optional usb # # USB storage drivers # dev/usb/storage/umass.c optional umass dev/usb/storage/urio.c optional urio dev/usb/storage/ustorage_fs.c optional usfs # # USB core # dev/usb/usb_busdma.c optional usb dev/usb/usb_compat_linux.c optional usb dev/usb/usb_core.c optional usb dev/usb/usb_debug.c optional usb dev/usb/usb_dev.c optional usb dev/usb/usb_device.c optional usb dev/usb/usb_dynamic.c optional usb dev/usb/usb_error.c optional usb dev/usb/usb_generic.c optional usb dev/usb/usb_handle_request.c optional usb dev/usb/usb_hid.c optional usb dev/usb/usb_hub.c optional usb dev/usb/usb_if.m optional usb dev/usb/usb_lookup.c optional usb dev/usb/usb_mbuf.c optional usb dev/usb/usb_msctest.c optional usb dev/usb/usb_parse.c optional usb dev/usb/usb_process.c optional usb dev/usb/usb_request.c optional usb dev/usb/usb_transfer.c optional usb dev/usb/usb_util.c optional usb # # USB ethernet drivers # dev/usb/net/if_aue.c optional aue dev/usb/net/if_axe.c optional axe dev/usb/net/if_cdce.c optional cdce dev/usb/net/if_cue.c optional cue dev/usb/net/if_kue.c optional kue dev/usb/net/if_rue.c optional rue dev/usb/net/if_udav.c optional udav dev/usb/net/usb_ethernet.c \ optional (aue | axe | cdce | cue | kue | rue | udav) # # USB WLAN drivers # dev/usb/wlan/if_rum.c optional rum dev/usb/wlan/if_uath.c optional uath dev/usb/wlan/if_ural.c optional ural dev/usb/wlan/if_zyd.c optional zyd # # USB serial and parallel port drivers # dev/usb/serial/u3g.c optional u3g dev/usb/serial/uark.c optional uark dev/usb/serial/ubsa.c optional ubsa dev/usb/serial/ubser.c optional ubser dev/usb/serial/uchcom.c optional uchcom dev/usb/serial/ucycom.c optional ucycom dev/usb/serial/ufoma.c optional ufoma dev/usb/serial/uftdi.c optional uftdi dev/usb/serial/ugensa.c optional ugensa dev/usb/serial/uipaq.c optional uipaq dev/usb/serial/ulpt.c optional ulpt dev/usb/serial/umct.c optional umct dev/usb/serial/umodem.c optional umodem dev/usb/serial/umoscom.c optional umoscom dev/usb/serial/uplcom.c optional uplcom dev/usb/serial/uslcom.c optional uslcom dev/usb/serial/uvisor.c optional uvisor dev/usb/serial/uvscom.c optional uvscom dev/usb/serial/usb_serial.c optional ucom | \ (u3g | uark | ubsa | ubser | uchcom | ucycom | ufoma | uftdi | ugensa | uipaq | ulpt | umct | umodem | umoscom | uplcom | uslcom | uvisor | uvscom) # # USB misc drivers # dev/usb/misc/ufm.c optional ufm dev/usb/misc/udbp.c optional udbp # # USB input drivers # dev/usb/input/uhid.c optional uhid dev/usb/input/ukbd.c optional ukbd dev/usb/input/ums.c optional ums # # USB quirks # dev/usb/quirk/usb_quirk.c optional usb # # USB templates # dev/usb/template/usb_template.c optional usb_template dev/usb/template/usb_template_cdce.c optional usb_template dev/usb/template/usb_template_msc.c optional usb_template dev/usb/template/usb_template_mtp.c optional usb_template # # USB END # dev/utopia/idtphy.c optional utopia dev/utopia/suni.c optional utopia dev/utopia/utopia.c optional utopia dev/vge/if_vge.c optional vge dev/vkbd/vkbd.c optional vkbd dev/vr/if_vr.c optional vr pci dev/vx/if_vx.c optional vx dev/vx/if_vx_eisa.c optional vx eisa dev/vx/if_vx_pci.c optional vx pci dev/watchdog/watchdog.c standard dev/wb/if_wb.c optional wb pci dev/wds/wd7000.c optional wds isa dev/wi/if_wi.c optional wi dev/wi/if_wi_pccard.c optional wi pccard dev/wi/if_wi_pci.c optional wi pci dev/wl/if_wl.c optional wl isa wpifw.c optional wpifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk wpi.fw:wpifw:2144 -lintel_wpi -mwpi -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "wpifw.c" wpifw.fwo optional wpifw \ dependency "wpi.fw" \ compile-with "${LD} -b binary -d -warn-common -r -d -o ${.TARGET} wpi.fw" \ no-implicit-rule \ clean "wpifw.fwo" wpi.fw optional wpifw \ dependency ".PHONY" \ compile-with "uudecode -o ${.TARGET} $S/contrib/dev/wpi/iwlwifi-3945-2.14.4.fw.uu" \ no-obj no-implicit-rule \ clean "wpi.fw" dev/xe/if_xe.c optional xe dev/xe/if_xe_pccard.c optional xe pccard dev/xl/if_xl.c optional xl pci fs/coda/coda_fbsd.c optional vcoda fs/coda/coda_psdev.c optional vcoda fs/coda/coda_subr.c optional vcoda fs/coda/coda_venus.c optional vcoda fs/coda/coda_vfsops.c optional vcoda fs/coda/coda_vnops.c optional vcoda fs/deadfs/dead_vnops.c standard fs/devfs/devfs_devs.c standard fs/devfs/devfs_rule.c standard fs/devfs/devfs_vfsops.c standard fs/devfs/devfs_vnops.c standard fs/fdescfs/fdesc_vfsops.c optional fdescfs fs/fdescfs/fdesc_vnops.c optional fdescfs fs/fifofs/fifo_vnops.c standard fs/hpfs/hpfs_alsubr.c optional hpfs fs/hpfs/hpfs_lookup.c optional hpfs fs/hpfs/hpfs_subr.c optional hpfs fs/hpfs/hpfs_vfsops.c optional hpfs fs/hpfs/hpfs_vnops.c optional hpfs fs/msdosfs/msdosfs_conv.c optional msdosfs fs/msdosfs/msdosfs_denode.c optional msdosfs fs/msdosfs/msdosfs_fat.c optional msdosfs fs/msdosfs/msdosfs_fileno.c optional msdosfs fs/msdosfs/msdosfs_iconv.c optional msdosfs_iconv fs/msdosfs/msdosfs_lookup.c optional msdosfs fs/msdosfs/msdosfs_vfsops.c optional msdosfs fs/msdosfs/msdosfs_vnops.c optional msdosfs +fs/nfs/nfs_commonkrpc.c optional nfscl | nfsd +fs/nfs/nfs_commonsubs.c optional nfscl | nfsd +fs/nfs/nfs_commonport.c optional nfscl | nfsd +fs/nfs/nfs_commonacl.c optional nfscl | nfsd +fs/nfsclient/nfs_clcomsubs.c optional nfscl +fs/nfsclient/nfs_clsubs.c optional nfscl +fs/nfsclient/nfs_clstate.c optional nfscl +fs/nfsclient/nfs_clkrpc.c optional nfscl +fs/nfsclient/nfs_clrpcops.c optional nfscl +fs/nfsclient/nfs_clvnops.c optional nfscl +fs/nfsclient/nfs_clnode.c optional nfscl +fs/nfsclient/nfs_clvfsops.c optional nfscl +fs/nfsclient/nfs_cllock.c optional nfscl +fs/nfsclient/nfs_clport.c optional nfscl +fs/nfsclient/nfs_clbio.c optional nfscl +fs/nfsclient/nfs_clnfsiod.c optional nfscl +fs/nfsserver/nfs_nfsdsocket.c optional nfsd +fs/nfsserver/nfs_nfsdsubs.c optional nfsd +fs/nfsserver/nfs_nfsdstate.c optional nfsd +fs/nfsserver/nfs_nfsdkrpc.c optional nfsd +fs/nfsserver/nfs_nfsdserv.c optional nfsd +fs/nfsserver/nfs_nfsdport.c optional nfsd +fs/nfsserver/nfs_nfsdcache.c optional nfsd fs/ntfs/ntfs_compr.c optional ntfs fs/ntfs/ntfs_iconv.c optional ntfs_iconv fs/ntfs/ntfs_ihash.c optional ntfs fs/ntfs/ntfs_subr.c optional ntfs fs/ntfs/ntfs_vfsops.c optional ntfs fs/ntfs/ntfs_vnops.c optional ntfs fs/nullfs/null_subr.c optional nullfs fs/nullfs/null_vfsops.c optional nullfs fs/nullfs/null_vnops.c optional nullfs fs/nwfs/nwfs_io.c optional nwfs fs/nwfs/nwfs_ioctl.c optional nwfs fs/nwfs/nwfs_node.c optional nwfs fs/nwfs/nwfs_subr.c optional nwfs fs/nwfs/nwfs_vfsops.c optional nwfs fs/nwfs/nwfs_vnops.c optional nwfs fs/portalfs/portal_vfsops.c optional portalfs fs/portalfs/portal_vnops.c optional portalfs fs/procfs/procfs.c optional procfs fs/procfs/procfs_ctl.c optional procfs fs/procfs/procfs_dbregs.c optional procfs fs/procfs/procfs_fpregs.c optional procfs fs/procfs/procfs_ioctl.c optional procfs fs/procfs/procfs_map.c optional procfs fs/procfs/procfs_mem.c optional procfs fs/procfs/procfs_note.c optional procfs fs/procfs/procfs_regs.c optional procfs fs/procfs/procfs_rlimit.c optional procfs fs/procfs/procfs_status.c optional procfs fs/procfs/procfs_type.c optional procfs fs/pseudofs/pseudofs.c optional pseudofs fs/pseudofs/pseudofs_fileno.c optional pseudofs fs/pseudofs/pseudofs_vncache.c optional pseudofs fs/pseudofs/pseudofs_vnops.c optional pseudofs fs/smbfs/smbfs_io.c optional smbfs fs/smbfs/smbfs_node.c optional smbfs fs/smbfs/smbfs_smb.c optional smbfs fs/smbfs/smbfs_subr.c optional smbfs fs/smbfs/smbfs_vfsops.c optional smbfs fs/smbfs/smbfs_vnops.c optional smbfs fs/udf/osta.c optional udf fs/udf/udf_iconv.c optional udf_iconv fs/udf/udf_vfsops.c optional udf fs/udf/udf_vnops.c optional udf fs/unionfs/union_subr.c optional unionfs fs/unionfs/union_vfsops.c optional unionfs fs/unionfs/union_vnops.c optional unionfs fs/tmpfs/tmpfs_vnops.c optional tmpfs fs/tmpfs/tmpfs_fifoops.c optional tmpfs fs/tmpfs/tmpfs_vfsops.c optional tmpfs fs/tmpfs/tmpfs_subr.c optional tmpfs gdb/gdb_cons.c optional gdb gdb/gdb_main.c optional gdb gdb/gdb_packet.c optional gdb geom/bde/g_bde.c optional geom_bde geom/bde/g_bde_crypt.c optional geom_bde geom/bde/g_bde_lock.c optional geom_bde geom/bde/g_bde_work.c optional geom_bde geom/cache/g_cache.c optional geom_cache geom/concat/g_concat.c optional geom_concat geom/eli/g_eli.c optional geom_eli geom/eli/g_eli_crypto.c optional geom_eli geom/eli/g_eli_ctl.c optional geom_eli geom/eli/g_eli_integrity.c optional geom_eli geom/eli/g_eli_key.c optional geom_eli geom/eli/g_eli_privacy.c optional geom_eli geom/eli/pkcs5v2.c optional geom_eli geom/gate/g_gate.c optional geom_gate geom/geom_aes.c optional geom_aes geom/geom_bsd.c optional geom_bsd geom/geom_bsd_enc.c optional geom_bsd geom/geom_ccd.c optional ccd | geom_ccd geom/geom_ctl.c standard geom/geom_dev.c standard geom/geom_disk.c standard geom/geom_dump.c standard geom/geom_event.c standard geom/geom_fox.c optional geom_fox geom/geom_io.c standard geom/geom_kern.c standard geom/geom_mbr.c optional geom_mbr geom/geom_mbr_enc.c optional geom_mbr geom/geom_pc98.c optional geom_pc98 geom/geom_pc98_enc.c optional geom_pc98 geom/geom_redboot.c optional geom_redboot geom/geom_slice.c standard geom/geom_subr.c standard geom/geom_sunlabel.c optional geom_sunlabel geom/geom_sunlabel_enc.c optional geom_sunlabel geom/geom_vfs.c standard geom/geom_vol_ffs.c optional geom_vol geom/journal/g_journal.c optional geom_journal geom/journal/g_journal_ufs.c optional geom_journal geom/label/g_label.c optional geom_label geom/label/g_label_ext2fs.c optional geom_label geom/label/g_label_iso9660.c optional geom_label geom/label/g_label_msdosfs.c optional geom_label geom/label/g_label_ntfs.c optional geom_label geom/label/g_label_reiserfs.c optional geom_label geom/label/g_label_ufs.c optional geom_label geom/linux_lvm/g_linux_lvm.c optional geom_linux_lvm geom/mirror/g_mirror.c optional geom_mirror geom/mirror/g_mirror_ctl.c optional geom_mirror geom/multipath/g_multipath.c optional geom_multipath geom/nop/g_nop.c optional geom_nop geom/part/g_part.c standard geom/part/g_part_if.m standard geom/part/g_part_apm.c optional geom_part_apm geom/part/g_part_bsd.c optional geom_part_bsd geom/part/g_part_ebr.c optional geom_part_ebr geom/part/g_part_gpt.c optional geom_part_gpt geom/part/g_part_mbr.c optional geom_part_mbr geom/part/g_part_pc98.c optional geom_part_pc98 geom/part/g_part_vtoc8.c optional geom_part_vtoc8 geom/raid3/g_raid3.c optional geom_raid3 geom/raid3/g_raid3_ctl.c optional geom_raid3 geom/shsec/g_shsec.c optional geom_shsec geom/stripe/g_stripe.c optional geom_stripe geom/uzip/g_uzip.c optional geom_uzip geom/virstor/binstream.c optional geom_virstor geom/virstor/g_virstor.c optional geom_virstor geom/virstor/g_virstor_md.c optional geom_virstor geom/zero/g_zero.c optional geom_zero gnu/fs/ext2fs/ext2_alloc.c optional ext2fs \ warning "kernel contains GPL contaminated ext2fs filesystem" gnu/fs/ext2fs/ext2_balloc.c optional ext2fs gnu/fs/ext2fs/ext2_bmap.c optional ext2fs gnu/fs/ext2fs/ext2_inode.c optional ext2fs gnu/fs/ext2fs/ext2_inode_cnv.c optional ext2fs gnu/fs/ext2fs/ext2_linux_balloc.c optional ext2fs gnu/fs/ext2fs/ext2_linux_ialloc.c optional ext2fs gnu/fs/ext2fs/ext2_lookup.c optional ext2fs gnu/fs/ext2fs/ext2_subr.c optional ext2fs gnu/fs/ext2fs/ext2_vfsops.c optional ext2fs gnu/fs/ext2fs/ext2_vnops.c optional ext2fs gnu/fs/reiserfs/reiserfs_hashes.c optional reiserfs \ warning "kernel contains GPL contaminated ReiserFS filesystem" gnu/fs/reiserfs/reiserfs_inode.c optional reiserfs gnu/fs/reiserfs/reiserfs_item_ops.c optional reiserfs gnu/fs/reiserfs/reiserfs_namei.c optional reiserfs gnu/fs/reiserfs/reiserfs_prints.c optional reiserfs gnu/fs/reiserfs/reiserfs_stree.c optional reiserfs gnu/fs/reiserfs/reiserfs_vfsops.c optional reiserfs gnu/fs/reiserfs/reiserfs_vnops.c optional reiserfs # isa/isa_if.m standard isa/isa_common.c optional isa isa/isahint.c optional isa isa/orm.c optional isa isa/pnp.c optional isa isapnp isa/pnpparse.c optional isa isapnp fs/cd9660/cd9660_bmap.c optional cd9660 fs/cd9660/cd9660_lookup.c optional cd9660 fs/cd9660/cd9660_node.c optional cd9660 fs/cd9660/cd9660_rrip.c optional cd9660 fs/cd9660/cd9660_util.c optional cd9660 fs/cd9660/cd9660_vfsops.c optional cd9660 fs/cd9660/cd9660_vnops.c optional cd9660 fs/cd9660/cd9660_iconv.c optional cd9660_iconv kern/bus_if.m standard kern/clock_if.m standard kern/cpufreq_if.m standard kern/device_if.m standard kern/imgact_elf.c standard kern/imgact_shell.c standard kern/inflate.c optional gzip kern/init_main.c standard kern/init_sysent.c standard kern/ksched.c optional _kposix_priority_scheduling kern/kern_acct.c standard kern/kern_alq.c optional alq kern/kern_clock.c standard kern/kern_condvar.c standard kern/kern_conf.c standard kern/kern_cons.c standard kern/kern_cpu.c standard kern/kern_cpuset.c standard kern/kern_context.c standard kern/kern_descrip.c standard kern/kern_dtrace.c optional kdtrace_hooks kern/kern_environment.c standard kern/kern_event.c standard kern/kern_exec.c standard kern/kern_exit.c standard kern/kern_fail.c standard kern/kern_fork.c standard kern/kern_idle.c standard kern/kern_intr.c standard kern/kern_jail.c standard kern/kern_kthread.c standard kern/kern_ktr.c optional ktr kern/kern_ktrace.c standard kern/kern_linker.c standard kern/kern_lock.c standard kern/kern_lockf.c standard kern/kern_lockstat.c optional kdtrace_hooks kern/kern_malloc.c standard kern/kern_mbuf.c standard kern/kern_mib.c standard kern/kern_module.c standard kern/kern_mtxpool.c standard kern/kern_mutex.c standard kern/kern_ntptime.c standard kern/kern_osd.c standard kern/kern_physio.c standard kern/kern_pmc.c standard kern/kern_poll.c optional device_polling kern/kern_priv.c standard kern/kern_proc.c standard kern/kern_prot.c standard kern/kern_resource.c standard kern/kern_rmlock.c standard kern/kern_rwlock.c standard kern/kern_sdt.c optional kdtrace_hooks kern/kern_sema.c standard kern/kern_shutdown.c standard kern/kern_sig.c standard kern/kern_subr.c standard kern/kern_switch.c standard kern/kern_sx.c standard kern/kern_synch.c standard kern/kern_syscalls.c standard kern/kern_sysctl.c standard kern/kern_tc.c standard kern/kern_thr.c standard kern/kern_thread.c standard kern/kern_time.c standard kern/kern_timeout.c standard kern/kern_umtx.c standard kern/kern_uuid.c standard kern/kern_vimage.c standard kern/kern_xxx.c standard kern/link_elf.c standard kern/linker_if.m standard kern/md4c.c optional netsmb kern/md5c.c standard kern/p1003_1b.c standard kern/posix4_mib.c standard kern/sched_4bsd.c optional sched_4bsd kern/sched_ule.c optional sched_ule kern/serdev_if.m standard kern/stack_protector.c standard \ compile-with "${NORMAL_C:N-fstack-protector*}" kern/subr_acl_posix1e.c standard kern/subr_autoconf.c standard kern/subr_blist.c standard kern/subr_bus.c standard kern/subr_bufring.c standard kern/subr_clist.c standard kern/subr_clock.c standard kern/subr_devstat.c standard kern/subr_disk.c standard kern/subr_eventhandler.c standard kern/subr_fattime.c standard kern/subr_firmware.c optional firmware kern/subr_hints.c standard kern/subr_kdb.c standard kern/subr_kobj.c standard kern/subr_lock.c standard kern/subr_log.c standard kern/subr_mbpool.c optional libmbpool kern/subr_mchain.c optional libmchain kern/subr_module.c standard kern/subr_msgbuf.c standard kern/subr_param.c standard kern/subr_pcpu.c standard kern/subr_power.c standard kern/subr_prf.c standard kern/subr_prof.c standard kern/subr_rman.c standard kern/subr_rtc.c standard kern/subr_sbuf.c standard kern/subr_scanf.c standard kern/subr_sleepqueue.c standard kern/subr_smp.c standard kern/subr_stack.c optional ddb | stack | ktr kern/subr_taskqueue.c standard kern/subr_trap.c standard kern/subr_turnstile.c standard kern/subr_unit.c standard kern/subr_witness.c optional witness kern/sys_generic.c standard kern/sys_pipe.c standard kern/sys_process.c standard kern/sys_socket.c standard kern/syscalls.c optional witness | invariants | kdtrace_hooks kern/sysv_ipc.c standard kern/sysv_msg.c optional sysvmsg kern/sysv_sem.c optional sysvsem kern/sysv_shm.c optional sysvshm kern/tty.c standard kern/tty_compat.c optional compat_43tty kern/tty_info.c standard kern/tty_inq.c standard kern/tty_outq.c standard kern/tty_pts.c standard kern/tty_pty.c optional pty kern/tty_tty.c standard kern/tty_ttydisc.c standard kern/uipc_accf.c optional inet kern/uipc_cow.c optional zero_copy_sockets kern/uipc_debug.c optional ddb kern/uipc_domain.c standard kern/uipc_mbuf.c standard kern/uipc_mbuf2.c standard kern/uipc_mqueue.c optional p1003_1b_mqueue kern/uipc_sem.c optional p1003_1b_semaphores kern/uipc_shm.c standard kern/uipc_sockbuf.c standard kern/uipc_socket.c standard kern/uipc_syscalls.c standard kern/uipc_usrreq.c standard kern/vfs_acl.c standard kern/vfs_aio.c optional vfs_aio kern/vfs_bio.c standard kern/vfs_cache.c standard kern/vfs_cluster.c standard kern/vfs_default.c standard kern/vfs_export.c standard kern/vfs_extattr.c standard kern/vfs_hash.c standard kern/vfs_init.c standard kern/vfs_lookup.c standard kern/vfs_mount.c standard kern/vfs_subr.c standard kern/vfs_syscalls.c standard kern/vfs_vnops.c standard # # Kernel GSS-API # gssd.h optional kgssapi \ dependency "$S/kgssapi/gssd.x" \ compile-with "rpcgen -hM $S/kgssapi/gssd.x | grep -v pthread.h > gssd.h" \ no-obj no-implicit-rule before-depend local \ clean "gssd.h" gssd_xdr.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "rpcgen -c $S/kgssapi/gssd.x -o gssd_xdr.c" \ no-implicit-rule before-depend local \ clean "gssd_xdr.c" gssd_clnt.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "rpcgen -lM $S/kgssapi/gssd.x | grep -v string.h > gssd_clnt.c" \ no-implicit-rule before-depend local \ clean "gssd_clnt.c" kgssapi/gss_accept_sec_context.c optional kgssapi kgssapi/gss_add_oid_set_member.c optional kgssapi kgssapi/gss_acquire_cred.c optional kgssapi kgssapi/gss_canonicalize_name.c optional kgssapi kgssapi/gss_create_empty_oid_set.c optional kgssapi kgssapi/gss_delete_sec_context.c optional kgssapi kgssapi/gss_display_status.c optional kgssapi kgssapi/gss_export_name.c optional kgssapi kgssapi/gss_get_mic.c optional kgssapi kgssapi/gss_init_sec_context.c optional kgssapi kgssapi/gss_impl.c optional kgssapi kgssapi/gss_import_name.c optional kgssapi kgssapi/gss_names.c optional kgssapi kgssapi/gss_pname_to_uid.c optional kgssapi kgssapi/gss_release_buffer.c optional kgssapi kgssapi/gss_release_cred.c optional kgssapi kgssapi/gss_release_name.c optional kgssapi kgssapi/gss_release_oid_set.c optional kgssapi kgssapi/gss_set_cred_option.c optional kgssapi kgssapi/gss_test_oid_set_member.c optional kgssapi kgssapi/gss_unwrap.c optional kgssapi kgssapi/gss_verify_mic.c optional kgssapi kgssapi/gss_wrap.c optional kgssapi kgssapi/gss_wrap_size_limit.c optional kgssapi kgssapi/gssd_prot.c optional kgssapi kgssapi/krb5/krb5_mech.c optional kgssapi kgssapi/krb5/kcrypto.c optional kgssapi kgssapi/krb5/kcrypto_aes.c optional kgssapi kgssapi/krb5/kcrypto_arcfour.c optional kgssapi kgssapi/krb5/kcrypto_des.c optional kgssapi kgssapi/krb5/kcrypto_des3.c optional kgssapi kgssapi/kgss_if.m optional kgssapi kgssapi/gsstest.c optional kgssapi_debug # These files in libkern/ are those needed by all architectures. Some # of the files in libkern/ are only needed on some architectures, e.g., # libkern/divdi3.c is needed by i386 but not alpha. Also, some of these # routines may be optimized for a particular platform. In either case, # the file should be moved to conf/files. from here. # libkern/arc4random.c standard libkern/bcd.c standard libkern/bsearch.c standard libkern/crc32.c standard libkern/fnmatch.c standard libkern/gets.c standard libkern/iconv.c optional libiconv libkern/iconv_converter_if.m optional libiconv libkern/iconv_xlat.c optional libiconv libkern/iconv_xlat16.c optional libiconv libkern/index.c standard libkern/inet_ntoa.c standard libkern/mcount.c optional profiling-routine libkern/memcmp.c standard libkern/qsort.c standard libkern/qsort_r.c standard libkern/random.c standard libkern/rindex.c standard libkern/scanc.c standard libkern/skpc.c standard libkern/strcasecmp.c standard libkern/strcat.c standard libkern/strcmp.c standard libkern/strcpy.c standard libkern/strcspn.c standard libkern/strdup.c standard libkern/strlcat.c standard libkern/strlcpy.c standard libkern/strlen.c standard libkern/strncmp.c standard libkern/strncpy.c standard libkern/strsep.c standard libkern/strspn.c standard libkern/strstr.c standard libkern/strtol.c standard libkern/strtoq.c standard libkern/strtoul.c standard libkern/strtouq.c standard libkern/strvalid.c standard net/bpf.c standard net/bpf_buffer.c optional bpf net/bpf_jitter.c optional bpf_jitter net/bpf_filter.c optional bpf | netgraph_bpf net/bpf_zerocopy.c optional bpf net/bridgestp.c optional bridge | if_bridge net/flowtable.c optional flowtable net/ieee8023ad_lacp.c optional lagg net/if.c standard net/if_arcsubr.c optional arcnet net/if_atmsubr.c optional atm net/if_bridge.c optional bridge | if_bridge net/if_clone.c standard net/if_dead.c standard net/if_disc.c optional disc net/if_edsc.c optional edsc net/if_ef.c optional ef net/if_enc.c optional enc net/if_ethersubr.c optional ether \ compile-with "${NORMAL_C} -I$S/contrib/pf" net/if_faith.c optional faith net/if_fddisubr.c optional fddi net/if_fwsubr.c optional fwip net/if_gif.c optional gif net/if_gre.c optional gre net/if_iso88025subr.c optional token net/if_lagg.c optional lagg net/if_loop.c optional loop net/if_llatbl.c standard net/if_media.c standard net/if_mib.c standard net/if_spppfr.c optional sppp | netgraph_sppp net/if_spppsubr.c optional sppp | netgraph_sppp net/if_stf.c optional stf net/if_tun.c optional tun net/if_tap.c optional tap net/if_vlan.c optional vlan net/mppcc.c optional netgraph_mppc_compression net/mppcd.c optional netgraph_mppc_compression net/netisr.c standard net/pfil.c optional ether | inet net/radix.c standard net/radix_mpath.c standard net/raw_cb.c standard net/raw_usrreq.c standard net/route.c standard net/rtsock.c standard net/slcompress.c optional netgraph_vjc | sppp | \ netgraph_sppp net/zlib.c optional crypto | geom_uzip | ipsec | \ mxge | netgraph_deflate | \ ddb_ctf net80211/ieee80211.c optional wlan net80211/ieee80211_acl.c optional wlan wlan_acl net80211/ieee80211_adhoc.c optional wlan net80211/ieee80211_amrr.c optional wlan wlan_amrr net80211/ieee80211_crypto.c optional wlan net80211/ieee80211_crypto_ccmp.c optional wlan wlan_ccmp net80211/ieee80211_crypto_none.c optional wlan net80211/ieee80211_crypto_tkip.c optional wlan wlan_tkip net80211/ieee80211_crypto_wep.c optional wlan wlan_wep net80211/ieee80211_ddb.c optional wlan ddb net80211/ieee80211_dfs.c optional wlan net80211/ieee80211_freebsd.c optional wlan net80211/ieee80211_hostap.c optional wlan net80211/ieee80211_ht.c optional wlan net80211/ieee80211_input.c optional wlan net80211/ieee80211_ioctl.c optional wlan net80211/ieee80211_monitor.c optional wlan net80211/ieee80211_node.c optional wlan net80211/ieee80211_output.c optional wlan net80211/ieee80211_phy.c optional wlan net80211/ieee80211_power.c optional wlan net80211/ieee80211_proto.c optional wlan net80211/ieee80211_radiotap.c optional wlan net80211/ieee80211_regdomain.c optional wlan net80211/ieee80211_rssadapt.c optional wlan wlan_rssadapt net80211/ieee80211_scan.c optional wlan net80211/ieee80211_scan_sta.c optional wlan net80211/ieee80211_sta.c optional wlan net80211/ieee80211_superg.c optional wlan ieee80211_support_superg net80211/ieee80211_tdma.c optional wlan ieee80211_support_tdma net80211/ieee80211_wds.c optional wlan net80211/ieee80211_xauth.c optional wlan wlan_xauth netatalk/aarp.c optional netatalk netatalk/at_control.c optional netatalk netatalk/at_proto.c optional netatalk netatalk/at_rmx.c optional netatalk netatalk/ddp_input.c optional netatalk netatalk/ddp_output.c optional netatalk netatalk/ddp_pcb.c optional netatalk netatalk/ddp_usrreq.c optional netatalk netgraph/atm/ccatm/ng_ccatm.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/ng_atm.c optional ngatm_atm netgraph/atm/ngatmbase.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscfu/ng_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscop/ng_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/uni/ng_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/bluetooth/common/ng_bluetooth.c optional netgraph_bluetooth netgraph/bluetooth/drivers/bt3c/ng_bt3c_pccard.c optional netgraph_bluetooth_bt3c netgraph/bluetooth/drivers/h4/ng_h4.c optional netgraph_bluetooth_h4 netgraph/bluetooth/drivers/ubt/ng_ubt.c optional netgraph_bluetooth_ubt usb netgraph/bluetooth/drivers/ubtbcmfw/ubtbcmfw.c optional netgraph_bluetooth_ubtbcmfw usb netgraph/bluetooth/hci/ng_hci_cmds.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_evnt.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_main.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_misc.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_ulpi.c optional netgraph_bluetooth_hci netgraph/bluetooth/l2cap/ng_l2cap_cmds.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_evnt.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_llpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_main.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_misc.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_ulpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/socket/ng_btsocket.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_hci_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_rfcomm.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_sco.c optional netgraph_bluetooth_socket netgraph/netflow/netflow.c optional netgraph_netflow netgraph/netflow/ng_netflow.c optional netgraph_netflow netgraph/ng_UI.c optional netgraph_UI netgraph/ng_async.c optional netgraph_async netgraph/ng_atmllc.c optional netgraph_atmllc netgraph/ng_base.c optional netgraph netgraph/ng_bpf.c optional netgraph_bpf netgraph/ng_bridge.c optional netgraph_bridge netgraph/ng_car.c optional netgraph_car netgraph/ng_cisco.c optional netgraph_cisco netgraph/ng_deflate.c optional netgraph_deflate netgraph/ng_device.c optional netgraph_device netgraph/ng_echo.c optional netgraph_echo netgraph/ng_eiface.c optional netgraph_eiface netgraph/ng_ether.c optional netgraph_ether netgraph/ng_ether_echo.c optional netgraph_ether_echo netgraph/ng_fec.c optional netgraph_fec netgraph/ng_frame_relay.c optional netgraph_frame_relay netgraph/ng_gif.c optional netgraph_gif netgraph/ng_gif_demux.c optional netgraph_gif_demux netgraph/ng_hole.c optional netgraph_hole netgraph/ng_iface.c optional netgraph_iface netgraph/ng_ip_input.c optional netgraph_ip_input netgraph/ng_ipfw.c optional netgraph_ipfw netgraph/ng_ksocket.c optional netgraph_ksocket netgraph/ng_l2tp.c optional netgraph_l2tp netgraph/ng_lmi.c optional netgraph_lmi netgraph/ng_mppc.c optional netgraph_mppc_compression | \ netgraph_mppc_encryption netgraph/ng_nat.c optional netgraph_nat netgraph/ng_one2many.c optional netgraph_one2many netgraph/ng_parse.c optional netgraph netgraph/ng_ppp.c optional netgraph_ppp netgraph/ng_pppoe.c optional netgraph_pppoe netgraph/ng_pptpgre.c optional netgraph_pptpgre netgraph/ng_pred1.c optional netgraph_pred1 netgraph/ng_rfc1490.c optional netgraph_rfc1490 netgraph/ng_socket.c optional netgraph_socket netgraph/ng_split.c optional netgraph_split netgraph/ng_sppp.c optional netgraph_sppp netgraph/ng_tag.c optional netgraph_tag netgraph/ng_tcpmss.c optional netgraph_tcpmss netgraph/ng_tee.c optional netgraph_tee netgraph/ng_tty.c optional netgraph_tty netgraph/ng_vjc.c optional netgraph_vjc netinet/accf_data.c optional accept_filter_data netinet/accf_dns.c optional accept_filter_dns netinet/accf_http.c optional accept_filter_http netinet/if_atm.c optional atm netinet/if_ether.c optional ether netinet/igmp.c optional inet netinet/in.c optional inet netinet/ip_carp.c optional carp netinet/in_gif.c optional gif inet netinet/ip_gre.c optional gre inet netinet/ip_id.c optional inet netinet/in_mcast.c optional inet netinet/in_pcb.c optional inet netinet/in_proto.c optional inet \ compile-with "${NORMAL_C} -I$S/contrib/pf" netinet/in_rmx.c optional inet netinet/ip_divert.c optional ipdivert netinet/ip_dummynet.c optional dummynet netinet/ip_ecn.c optional inet | inet6 netinet/ip_encap.c optional inet | inet6 netinet/ip_fastfwd.c optional inet netinet/ip_fw2.c optional ipfirewall \ compile-with "${NORMAL_C} -I$S/contrib/pf" netinet/ip_fw_pfil.c optional ipfirewall netinet/ip_fw_nat.c optional ipfirewall_nat netinet/ip_icmp.c optional inet netinet/ip_input.c optional inet netinet/ip_ipsec.c optional ipsec netinet/ip_mroute.c optional mrouting inet | mrouting inet6 netinet/ip_options.c optional inet netinet/ip_output.c optional inet netinet/raw_ip.c optional inet netinet/sctp_asconf.c optional inet sctp netinet/sctp_auth.c optional inet sctp netinet/sctp_bsd_addr.c optional inet sctp netinet/sctp_cc_functions.c optional inet sctp netinet/sctp_crc32.c optional inet sctp netinet/sctp_indata.c optional inet sctp netinet/sctp_input.c optional inet sctp netinet/sctp_output.c optional inet sctp netinet/sctp_pcb.c optional inet sctp netinet/sctp_peeloff.c optional inet sctp netinet/sctp_sysctl.c optional inet sctp netinet/sctp_timer.c optional inet sctp netinet/sctp_usrreq.c optional inet sctp netinet/sctputil.c optional inet sctp netinet/tcp_debug.c optional tcpdebug netinet/tcp_hostcache.c optional inet netinet/tcp_input.c optional inet netinet/tcp_lro.c optional inet netinet/tcp_output.c optional inet netinet/tcp_offload.c optional inet netinet/tcp_reass.c optional inet netinet/tcp_sack.c optional inet netinet/tcp_subr.c optional inet netinet/tcp_syncache.c optional inet netinet/tcp_timer.c optional inet netinet/tcp_timewait.c optional inet netinet/tcp_usrreq.c optional inet netinet/udp_usrreq.c optional inet netinet/libalias/alias.c optional libalias | netgraph_nat netinet/libalias/alias_db.c optional libalias | netgraph_nat netinet/libalias/alias_mod.c optional libalias | netgraph_nat netinet/libalias/alias_proxy.c optional libalias | netgraph_nat netinet/libalias/alias_util.c optional libalias | netgraph_nat netinet/libalias/alias_sctp.c optional libalias | netgraph_nat netinet6/dest6.c optional inet6 netinet6/frag6.c optional inet6 netinet6/icmp6.c optional inet6 netinet6/in6.c optional inet6 netinet6/in6_cksum.c optional inet6 netinet6/in6_gif.c optional gif inet6 netinet6/in6_ifattach.c optional inet6 netinet6/in6_mcast.c optional inet6 netinet6/in6_pcb.c optional inet6 netinet6/in6_proto.c optional inet6 netinet6/in6_rmx.c optional inet6 netinet6/in6_src.c optional inet6 netinet6/ip6_forward.c optional inet6 netinet6/ip6_id.c optional inet6 netinet6/ip6_input.c optional inet6 netinet6/ip6_mroute.c optional mrouting inet6 netinet6/ip6_output.c optional inet6 netinet6/ip6_ipsec.c optional inet6 ipsec netinet6/mld6.c optional inet6 netinet6/nd6.c optional inet6 netinet6/nd6_nbr.c optional inet6 netinet6/nd6_rtr.c optional inet6 netinet6/raw_ip6.c optional inet6 netinet6/route6.c optional inet6 netinet6/scope6.c optional inet6 netinet6/sctp6_usrreq.c optional inet6 sctp netinet6/udp6_usrreq.c optional inet6 netipsec/ipsec.c optional ipsec netipsec/ipsec_input.c optional ipsec netipsec/ipsec_mbuf.c optional ipsec netipsec/ipsec_output.c optional ipsec netipsec/key.c optional ipsec netipsec/key_debug.c optional ipsec netipsec/keysock.c optional ipsec netipsec/xform_ah.c optional ipsec netipsec/xform_esp.c optional ipsec netipsec/xform_ipcomp.c optional ipsec netipsec/xform_ipip.c optional ipsec netipsec/xform_tcp.c optional ipsec tcp_signature netipx/ipx.c optional ipx netipx/ipx_cksum.c optional ipx netipx/ipx_input.c optional ipx netipx/ipx_outputfl.c optional ipx netipx/ipx_pcb.c optional ipx netipx/ipx_proto.c optional ipx netipx/ipx_usrreq.c optional ipx netipx/spx_debug.c optional ipx netipx/spx_reass.c optional ipx netipx/spx_usrreq.c optional ipx netnatm/natm.c optional natm netnatm/natm_pcb.c optional natm netnatm/natm_proto.c optional natm netncp/ncp_conn.c optional ncp netncp/ncp_crypt.c optional ncp netncp/ncp_login.c optional ncp netncp/ncp_mod.c optional ncp netncp/ncp_ncp.c optional ncp netncp/ncp_nls.c optional ncp netncp/ncp_rq.c optional ncp netncp/ncp_sock.c optional ncp netncp/ncp_subr.c optional ncp netsmb/smb_conn.c optional netsmb netsmb/smb_crypt.c optional netsmb netsmb/smb_dev.c optional netsmb netsmb/smb_iod.c optional netsmb netsmb/smb_rq.c optional netsmb netsmb/smb_smb.c optional netsmb netsmb/smb_subr.c optional netsmb netsmb/smb_trantcp.c optional netsmb netsmb/smb_usr.c optional netsmb nfs/nfs_common.c optional nfsclient | nfsserver nfsclient/bootp_subr.c optional bootp nfsclient nfsclient/krpc_subr.c optional bootp nfsclient nfsclient/nfs_bio.c optional nfsclient nfsclient/nfs_diskless.c optional nfsclient nfs_root nfsclient/nfs_node.c optional nfsclient nfsclient/nfs_socket.c optional nfsclient nfsclient/nfs_krpc.c optional nfsclient nfsclient/nfs_subs.c optional nfsclient nfsclient/nfs_nfsiod.c optional nfsclient nfsclient/nfs_vfsops.c optional nfsclient nfsclient/nfs_vnops.c optional nfsclient nfsclient/nfs_lock.c optional nfsclient nfsserver/nfs_fha.c optional nfsserver nfsserver/nfs_serv.c optional nfsserver nfsserver/nfs_srvkrpc.c optional nfsserver nfsserver/nfs_srvsock.c optional nfsserver nfsserver/nfs_srvcache.c optional nfsserver nfsserver/nfs_srvsubs.c optional nfsserver nfsserver/nfs_syscalls.c optional nfsserver -nfs/nfs_nfssvc.c optional nfsserver -nlm/nlm_advlock.c optional nfslockd nfsclient -nlm/nlm_prot_clnt.c optional nfslockd -nlm/nlm_prot_impl.c optional nfslockd -nlm/nlm_prot_server.c optional nfslockd -nlm/nlm_prot_svc.c optional nfslockd -nlm/nlm_prot_xdr.c optional nfslockd -nlm/sm_inter_xdr.c optional nfslockd +nfs/nfs_nfssvc.c optional nfsserver | nfscl | nfsd +nlm/nlm_advlock.c optional nfslockd nfsclient | nfsd nfsclient +nlm/nlm_prot_clnt.c optional nfslockd | nfsd +nlm/nlm_prot_impl.c optional nfslockd | nfsd +nlm/nlm_prot_server.c optional nfslockd | nfsd +nlm/nlm_prot_svc.c optional nfslockd | nfsd +nlm/nlm_prot_xdr.c optional nfslockd | nfsd +nlm/sm_inter_xdr.c optional nfslockd | nfsd # crypto support opencrypto/cast.c optional crypto | ipsec opencrypto/criov.c optional crypto opencrypto/crypto.c optional crypto opencrypto/cryptodev.c optional cryptodev opencrypto/cryptodev_if.m optional crypto opencrypto/cryptosoft.c optional crypto opencrypto/deflate.c optional crypto opencrypto/rmd160.c optional crypto | ipsec opencrypto/skipjack.c optional crypto opencrypto/xform.c optional crypto pci/alpm.c optional alpm pci pci/amdpm.c optional amdpm pci | nfpm pci pci/amdsmb.c optional amdsmb pci pci/if_rl.c optional rl pci pci/intpm.c optional intpm pci pci/ncr.c optional ncr pci pci/nfsmb.c optional nfsmb pci pci/viapm.c optional viapm pci -rpc/auth_none.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/auth_unix.c optional krpc | nfslockd | nfsclient -rpc/authunix_prot.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/clnt_dg.c optional krpc | nfslockd | nfsclient -rpc/clnt_rc.c optional krpc | nfslockd | nfsclient -rpc/clnt_vc.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/getnetconfig.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/inet_ntop.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/inet_pton.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/replay.c optional krpc | nfslockd | nfsserver -rpc/rpc_callmsg.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/rpc_generic.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/rpc_prot.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/rpcb_clnt.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/rpcb_prot.c optional krpc | nfslockd | nfsclient | nfsserver -rpc/svc.c optional krpc | nfslockd | nfsserver -rpc/svc_auth.c optional krpc | nfslockd | nfsserver -rpc/svc_auth_unix.c optional krpc | nfslockd | nfsserver -rpc/svc_dg.c optional krpc | nfslockd | nfsserver -rpc/svc_generic.c optional krpc | nfslockd | nfsserver -rpc/svc_vc.c optional krpc | nfslockd | nfsserver -rpc/rpcsec_gss/rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi -rpc/rpcsec_gss/rpcsec_gss_conf.c optional krpc kgssapi | nfslockd kgssapi -rpc/rpcsec_gss/rpcsec_gss_misc.c optional krpc kgssapi | nfslockd kgssapi -rpc/rpcsec_gss/rpcsec_gss_prot.c optional krpc kgssapi | nfslockd kgssapi -rpc/rpcsec_gss/svc_rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi +rpc/auth_none.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/auth_unix.c optional krpc | nfslockd | nfsclient | nfscl | nfsd +rpc/authunix_prot.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/clnt_dg.c optional krpc | nfslockd | nfsclient | nfscl | nfsd +rpc/clnt_rc.c optional krpc | nfslockd | nfsclient | nfscl | nfsd +rpc/clnt_vc.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/getnetconfig.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/inet_ntop.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/inet_pton.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/replay.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/rpc_callmsg.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/rpc_generic.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/rpc_prot.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/rpcb_clnt.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/rpcb_prot.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd +rpc/svc.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/svc_auth.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/svc_auth_unix.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/svc_dg.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/svc_generic.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/svc_vc.c optional krpc | nfslockd | nfsserver | nfscl | nfsd +rpc/rpcsec_gss/rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi +rpc/rpcsec_gss/rpcsec_gss_conf.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi +rpc/rpcsec_gss/rpcsec_gss_misc.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi +rpc/rpcsec_gss/rpcsec_gss_prot.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi +rpc/rpcsec_gss/svc_rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi security/audit/audit.c optional audit security/audit/audit_arg.c optional audit security/audit/audit_bsm.c optional audit security/audit/audit_bsm_domain.c optional audit security/audit/audit_bsm_errno.c optional audit security/audit/audit_bsm_fcntl.c optional audit security/audit/audit_bsm_klib.c optional audit security/audit/audit_bsm_socket_type.c optional audit security/audit/audit_bsm_token.c optional audit security/audit/audit_pipe.c optional audit security/audit/audit_syscalls.c standard security/audit/audit_trigger.c optional audit security/audit/audit_worker.c optional audit security/mac/mac_atalk.c optional mac netatalk security/mac/mac_audit.c optional mac audit security/mac/mac_cred.c optional mac security/mac/mac_framework.c optional mac security/mac/mac_inet.c optional mac inet security/mac/mac_inet6.c optional mac inet6 security/mac/mac_label.c optional mac security/mac/mac_net.c optional mac security/mac/mac_pipe.c optional mac security/mac/mac_posix_sem.c optional mac security/mac/mac_posix_shm.c optional mac security/mac/mac_priv.c optional mac security/mac/mac_process.c optional mac security/mac/mac_socket.c optional mac security/mac/mac_syscalls.c standard security/mac/mac_system.c optional mac security/mac/mac_sysv_msg.c optional mac security/mac/mac_sysv_sem.c optional mac security/mac/mac_sysv_shm.c optional mac security/mac/mac_vfs.c optional mac security/mac_biba/mac_biba.c optional mac_biba security/mac_bsdextended/mac_bsdextended.c optional mac_bsdextended security/mac_bsdextended/ugidfw_system.c optional mac_bsdextended security/mac_bsdextended/ugidfw_vnode.c optional mac_bsdextended security/mac_ifoff/mac_ifoff.c optional mac_ifoff security/mac_lomac/mac_lomac.c optional mac_lomac security/mac_mls/mac_mls.c optional mac_mls security/mac_none/mac_none.c optional mac_none security/mac_partition/mac_partition.c optional mac_partition security/mac_portacl/mac_portacl.c optional mac_portacl security/mac_seeotheruids/mac_seeotheruids.c optional mac_seeotheruids security/mac_stub/mac_stub.c optional mac_stub security/mac_test/mac_test.c optional mac_test ufs/ffs/ffs_alloc.c optional ffs ufs/ffs/ffs_balloc.c optional ffs ufs/ffs/ffs_inode.c optional ffs ufs/ffs/ffs_snapshot.c optional ffs ufs/ffs/ffs_softdep.c optional ffs ufs/ffs/ffs_subr.c optional ffs ufs/ffs/ffs_tables.c optional ffs ufs/ffs/ffs_vfsops.c optional ffs ufs/ffs/ffs_vnops.c optional ffs ufs/ffs/ffs_rawread.c optional directio ufs/ufs/ufs_acl.c optional ffs ufs/ufs/ufs_bmap.c optional ffs ufs/ufs/ufs_dirhash.c optional ffs ufs/ufs/ufs_extattr.c optional ffs ufs/ufs/ufs_gjournal.c optional ffs ufs/ufs/ufs_inode.c optional ffs ufs/ufs/ufs_lookup.c optional ffs ufs/ufs/ufs_quota.c optional ffs ufs/ufs/ufs_vfsops.c optional ffs ufs/ufs/ufs_vnops.c optional ffs vm/default_pager.c standard vm/device_pager.c standard vm/phys_pager.c standard vm/redzone.c optional DEBUG_REDZONE vm/swap_pager.c standard vm/uma_core.c standard vm/uma_dbg.c standard vm/vm_contig.c standard vm/memguard.c optional DEBUG_MEMGUARD vm/vm_fault.c standard vm/vm_glue.c standard vm/vm_init.c standard vm/vm_kern.c standard vm/vm_map.c standard vm/vm_meter.c standard vm/vm_mmap.c standard vm/vm_object.c standard vm/vm_page.c standard vm/vm_pageout.c standard vm/vm_pager.c standard vm/vm_phys.c standard vm/vm_reserv.c standard vm/vm_unix.c standard vm/vm_zeroidle.c standard vm/vnode_pager.c standard xdr/xdr.c optional krpc | nfslockd | nfsclient | nfsserver xdr/xdr_array.c optional krpc | nfslockd | nfsclient | nfsserver xdr/xdr_mbuf.c optional krpc | nfslockd | nfsclient | nfsserver xdr/xdr_mem.c optional krpc | nfslockd | nfsclient | nfsserver xdr/xdr_reference.c optional krpc | nfslockd | nfsclient | nfsserver xdr/xdr_sizeof.c optional krpc | nfslockd | nfsclient | nfsserver # gnu/fs/xfs/xfs_alloc.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" \ warning "kernel contains GPL contaminated xfs filesystem" gnu/fs/xfs/xfs_alloc_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bit.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bmap.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_bmap_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_buf_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_da_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_block.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_data.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_node.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_sf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir2_trace.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dir_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_error.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_extfree_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_fsops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_ialloc.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_ialloc_btree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_inode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_inode_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iocore.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_itable.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dfrag.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_log.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_log_recover.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_mount.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_rename.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_ail.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_buf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_extfree.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_inode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_trans_item.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_utils.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_vfsops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_vnodeops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_rw.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_attr_leaf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_attr.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_dmops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_qmops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iget.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_freebsd_iget.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_mountops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vnops.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_frw.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_buf.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_globals.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_dmistubs.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_super.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_stats.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vfs.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_vnode.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_sysctl.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_fs_subr.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/xfs_ioctl.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/debug.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/ktrace.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/mrlock.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/uuid.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/FreeBSD/support/kmem.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_iomap.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" gnu/fs/xfs/xfs_behavior.c optional xfs \ compile-with "${NORMAL_C} -I$S/gnu/fs/xfs/FreeBSD -I$S/gnu/fs/xfs/FreeBSD/support -I$S/gnu/fs/xfs" xen/gnttab.c optional xen | xenhvm xen/features.c optional xen | xenhvm xen/evtchn/evtchn.c optional xen xen/evtchn/evtchn_dev.c optional xen | xenhvm xen/reboot.c optional xen xen/xenbus/xenbus_client.c optional xen | xenhvm xen/xenbus/xenbus_comms.c optional xen | xenhvm xen/xenbus/xenbus_dev.c optional xen | xenhvm xen/xenbus/xenbus_if.m optional xen | xenhvm xen/xenbus/xenbus_probe.c optional xen | xenhvm #xen/xenbus/xenbus_probe_backend.c optional xen xen/xenbus/xenbus_xs.c optional xen | xenhvm dev/xen/balloon/balloon.c optional xen | xenhvm dev/xen/console/console.c optional xen dev/xen/console/xencons_ring.c optional xen dev/xen/blkfront/blkfront.c optional xen | xenhvm dev/xen/netfront/netfront.c optional xen | xenhvm dev/xen/xenpci/xenpci.c optional xenpci dev/xen/xenpci/evtchn.c optional xenpci dev/xen/xenpci/machine_reboot.c optional xenpci diff --git a/sys/conf/options b/sys/conf/options index cc06bd7f48fa..298c170fb04b 100644 --- a/sys/conf/options +++ b/sys/conf/options @@ -1,818 +1,825 @@ # $FreeBSD$ # # On the handling of kernel options # # All kernel options should be listed in NOTES, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT (generated from NOTES) should # compile as much code as possible. Try to structure option-using # code so that a single option only switch code on, or only switch # code off, to make it possible to have a full compile-test. If # necessary, you can check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "conf/options.". Options that affect a single source-file # .[c|s] should be directed into "opt_.h", while options # that affect multiple files should either go in "opt_global.h" if # this is a kernel-wide option (used just about everywhere), or in # "opt_.h" if it affects only some files. # Note that the effect of listing only an option without a # header-file-name in conf/options (and cousins) is that the last # convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h AAC_DEBUG opt_aac.h AHC_ALLOW_MEMIO opt_aic7xxx.h AHC_TMODE_ENABLE opt_aic7xxx.h AHC_DUMP_EEPROM opt_aic7xxx.h AHC_DEBUG opt_aic7xxx.h AHC_DEBUG_OPTS opt_aic7xxx.h AHC_REG_PRETTY_PRINT opt_aic7xxx.h AHD_DEBUG opt_aic79xx.h AHD_DEBUG_OPTS opt_aic79xx.h AHD_TMODE_ENABLE opt_aic79xx.h AHD_REG_PRETTY_PRINT opt_aic79xx.h ADW_ALLOW_MEMIO opt_adw.h TWA_DEBUG opt_twa.h TWA_FLASH_FIRMWARE opt_twa.h # Debugging options. DDB DDB_BUFR_SIZE opt_ddb.h DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h DDB_CAPTURE_MAXBUFSIZE opt_ddb.h DDB_CTF opt_ddb.h DDB_NUMSYM opt_ddb.h GDB KDB opt_global.h KDB_TRACE opt_kdb.h KDB_UNATTENDED opt_kdb.h SYSCTL_DEBUG opt_sysctl.h # Miscellaneous options. ADAPTIVE_SX ALQ AUDIT opt_global.h CODA_COMPAT_5 opt_coda.h COMPAT_43 opt_compat.h COMPAT_43TTY opt_compat.h COMPAT_FREEBSD4 opt_compat.h COMPAT_FREEBSD5 opt_compat.h COMPAT_FREEBSD6 opt_compat.h COMPAT_FREEBSD7 opt_compat.h COMPILING_LINT opt_global.h CY_PCI_FASTINTR DIRECTIO FULL_PREEMPTION opt_sched.h IPI_PREEMPTION opt_sched.h GEOM_AES opt_geom.h GEOM_BDE opt_geom.h GEOM_BSD opt_geom.h GEOM_CACHE opt_geom.h GEOM_CONCAT opt_geom.h GEOM_ELI opt_geom.h GEOM_FOX opt_geom.h GEOM_GATE opt_geom.h GEOM_JOURNAL opt_geom.h GEOM_LABEL opt_geom.h GEOM_LINUX_LVM opt_geom.h GEOM_MBR opt_geom.h GEOM_MIRROR opt_geom.h GEOM_MULTIPATH opt_geom.h GEOM_NOP opt_geom.h GEOM_PART_APM opt_geom.h GEOM_PART_BSD opt_geom.h GEOM_PART_EBR opt_geom.h GEOM_PART_EBR_COMPAT opt_geom.h GEOM_PART_GPT opt_geom.h GEOM_PART_MBR opt_geom.h GEOM_PART_PC98 opt_geom.h GEOM_PART_VTOC8 opt_geom.h GEOM_PC98 opt_geom.h GEOM_RAID3 opt_geom.h GEOM_SHSEC opt_geom.h GEOM_STRIPE opt_geom.h GEOM_SUNLABEL opt_geom.h GEOM_UZIP opt_geom.h GEOM_VIRSTOR opt_geom.h GEOM_VOL opt_geom.h GEOM_ZERO opt_geom.h KDTRACE_HOOKS opt_kdtrace.h KSTACK_MAX_PAGES KSTACK_PAGES KTRACE KTRACE_REQUEST_POOL opt_ktrace.h LIBICONV MAC MAC_BIBA opt_dontuse.h MAC_BSDEXTENDED opt_dontuse.h MAC_IFOFF opt_dontuse.h MAC_LOMAC opt_dontuse.h MAC_MLS opt_dontuse.h MAC_NONE opt_dontuse.h MAC_PARTITION opt_dontuse.h MAC_PORTACL opt_dontuse.h MAC_SEEOTHERUIDS opt_dontuse.h MAC_STATIC opt_mac.h MAC_STUB opt_dontuse.h MAC_TEST opt_dontuse.h MD_ROOT opt_md.h MD_ROOT_SIZE opt_md.h MFI_DEBUG opt_mfi.h MFI_DECODE_LOG opt_mfi.h MPROF_BUFFERS opt_mprof.h MPROF_HASH_SIZE opt_mprof.h NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h NO_ADAPTIVE_RWLOCKS NO_SYSCTL_DESCR opt_global.h NSWBUF_MIN opt_swap.h MBUF_PACKET_ZONE_DISABLE opt_global.h PANIC_REBOOT_WAIT_TIME opt_panic.h PPC_DEBUG opt_ppc.h PPC_PROBE_CHIPSET opt_ppc.h PPS_SYNC opt_ntp.h PREEMPTION opt_sched.h QUOTA SCHED_4BSD opt_sched.h SCHED_STATS opt_sched.h SCHED_ULE opt_sched.h SHOW_BUSYBUFS SLEEPQUEUE_PROFILING SLHCI_DEBUG opt_slhci.h SPX_HACK STACK opt_stack.h SUIDDIR MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h SEMMAP opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h SHMALL opt_sysvipc.h SHMMAX opt_sysvipc.h SHMMAXPGS opt_sysvipc.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SYSVMSG opt_sysvipc.h SYSVSEM opt_sysvipc.h SYSVSHM opt_sysvipc.h SW_WATCHDOG opt_watchdog.h TURNSTILE_PROFILING VFS_AIO VERBOSE_SYSINIT opt_global.h WLCACHE opt_wavelan.h WLDEBUG opt_wavelan.h # POSIX kernel options P1003_1B_MQUEUE opt_posix.h P1003_1B_SEMAPHORES opt_posix.h _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static filesystems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. CD9660 opt_dontuse.h CODA opt_dontuse.h EXT2FS opt_dontuse.h FDESCFS opt_dontuse.h HPFS opt_dontuse.h MSDOSFS opt_dontuse.h NTFS opt_dontuse.h NULLFS opt_dontuse.h NWFS opt_dontuse.h PORTALFS opt_dontuse.h PROCFS opt_dontuse.h PSEUDOFS opt_dontuse.h REISERFS opt_dontuse.h SMBFS opt_dontuse.h TMPFS opt_dontuse.h UDF opt_dontuse.h UNIONFS opt_dontuse.h # Pseudofs debugging PSEUDOFS_TRACE opt_pseudofs.h # Broken - ffs_snapshot() dependency from ufs_lookup() :-( FFS opt_ffs_broken_fixme.h # In-kernel GSS-API KGSSAPI opt_kgssapi.h KGSSAPI_DEBUG opt_kgssapi.h # These static filesystems have one slightly bogus static dependency in # sys/i386/i386/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. NFSCLIENT opt_nfs.h NFSSERVER opt_nfs.h # Use this option to compile both NFS client and server using the # legacy RPC implementation instead of the newer KRPC system (which # supports modern features such as RPCSEC_GSS NFS_LEGACYRPC opt_nfs.h +# Use these options to compile the experimental nfs client and/or +# server that supports NFSv4 into a kernel. +# NFSCL - client +# NFSD - server +NFSCL opt_nfs.h +NFSD opt_nfs.h + # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h NTFS_ICONV opt_dontuse.h UDF_ICONV opt_dontuse.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of thigs # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # On small, embedded systems, it can be useful to turn off support for # snapshots. It saves about 30-40k for a feature that would be lightly # used, if it is used at all. NO_FFS_SNAPSHOT opt_ffs.h # Enabling this option turns on support for Access Control Lists in UFS, # which can be used to support high security configurations. Depends on # UFS_EXTATTR. UFS_ACL opt_ufs.h # Enabling this option turns on support for extended attributes in UFS-based # filesystems, which can be used to support high security configurations # as well as new filesystem features. UFS_EXTATTR opt_ufs.h UFS_EXTATTR_AUTOSTART opt_ufs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # Enable gjournal-based UFS journal. UFS_GJOURNAL opt_ufs.h # The below sentence is not in English, and neither is this one. # We plan to remove the static dependences above, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # SMB/CIFS requester NETSMB opt_netsmb.h # Options used only in subr_param.c. HZ opt_param.h MAXFILES opt_param.h NBUF opt_param.h NSFBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in pci/ncr.c SCSI_NCR_DEBUG opt_ncr.h SCSI_NCR_MAX_SYNC opt_ncr.h SCSI_NCR_MAX_WIDE opt_ncr.h SCSI_NCR_MYADDR opt_ncr.h # Options used only in dev/isp/* ISP_TARGET_MODE opt_isp.h ISP_FW_CRASH_DUMP opt_isp.h ISP_DEFAULT_ROLES opt_isp.h # Options used only in dev/iscsi ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h # Options used in the 'ata' ATA/ATAPI driver ATA_STATIC_ID opt_ata.h ATA_NOPCI opt_ata.h # Net stuff. ACCEPT_FILTER_DATA ACCEPT_FILTER_DNS ACCEPT_FILTER_HTTP ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_CDNR opt_altq.h ALTQ_DEBUG opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h BOOTP opt_bootp.h BOOTP_BLOCKSIZE opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_NFSV3 opt_bootp.h BOOTP_WIRED_TO opt_bootp.h DEVICE_POLLING DEV_ENC opt_enc.h DEV_PF opt_pf.h DEV_PFLOG opt_pf.h DEV_PFSYNC opt_pf.h DEV_VLAN opt_vlan.h DUMMYNET opt_ipdn.h ETHER_8022 opt_ef.h ETHER_8023 opt_ef.h ETHER_II opt_ef.h ETHER_SNAP opt_ef.h INET opt_inet.h INET6 opt_inet6.h IPDIVERT IPFILTER opt_ipfilter.h IPFILTER_DEFAULT_BLOCK opt_ipfilter.h IPFILTER_LOG opt_ipfilter.h IPFILTER_LOOKUP opt_ipfilter.h IPFIREWALL opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPFIREWALL_FORWARD opt_ipfw.h IPFIREWALL_NAT opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPSEC opt_ipsec.h IPSEC_DEBUG opt_ipsec.h IP_NONLOCALBIND opt_inet.h IPSEC_FILTERTUNNEL opt_ipsec.h IPSTEALTH IPX KRPC LIBALIAS LIBMBPOOL LIBMCHAIN MBUF_PROFILING MBUF_STRESS_TEST MROUTING opt_mrouting.h NCP NETATALK opt_atalk.h NFSLOCKD RADIX_MPATH opt_mpath.h ROUTETABLES opt_route.h COMPAT_ROUTE_FLAGS opt_route.h SLIP_IFF_OPTS opt_slip.h TCPDEBUG TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading TCP_SIGNATURE opt_inet.h VLAN_ARRAY opt_vlan.h XBONEHACK FLOWTABLE opt_route.h # # SCTP # SCTP opt_sctp.h SCTP_DEBUG opt_sctp.h # Enable debug printfs SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. # # # # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH NETGRAPH_DEBUG opt_netgraph.h NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_ATMLLC opt_netgraph.h NETGRAPH_ATM_ATMPIF opt_netgraph.h NETGRAPH_BLUETOOTH opt_netgraph.h NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH_BLUETOOTH_H4 opt_netgraph.h NETGRAPH_BLUETOOTH_HCI opt_netgraph.h NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH_BLUETOOTH_UBT opt_netgraph.h NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CAR opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_DEFLATE opt_netgraph.h NETGRAPH_DEVICE opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_ETHER_ECHO opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_GIF opt_netgraph.h NETGRAPH_GIF_DEMUX opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_IP_INPUT opt_netgraph.h NETGRAPH_IPFW opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h NETGRAPH_LMI opt_netgraph.h # MPPC compression requires proprietary files (not included) NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_NAT opt_netgraph.h NETGRAPH_NETFLOW opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_PRED1 opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_SPLIT opt_netgraph.h NETGRAPH_SPPP opt_netgraph.h NETGRAPH_TAG opt_netgraph.h NETGRAPH_TCPMSS opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h # NgATM options NGATM_ATM opt_netgraph.h NGATM_ATMBASE opt_netgraph.h NGATM_SSCOP opt_netgraph.h NGATM_SSCFU opt_netgraph.h NGATM_UNI opt_netgraph.h NGATM_CCATM opt_netgraph.h # DRM options DRM_DEBUG opt_drm.h ZERO_COPY_SOCKETS opt_zero.h TI_PRIVATE_JUMBOS opt_ti.h TI_JUMBO_HDRSPLIT opt_ti.h # XXX Conflict: # of devices vs network protocol (Native ATM). # This makes "atm.h" unusable. NATM # DPT driver debug flags DPT_MEASURE_PERFORMANCE opt_dpt.h DPT_HANDLE_TIMEOUTS opt_dpt.h DPT_TIMEOUT_FACTOR opt_dpt.h DPT_LOST_IRQ opt_dpt.h DPT_RESET_HBA opt_dpt.h # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. CLUSTERDEBUG opt_debug_cluster.h DEBUG_1284 opt_ppb_1284.h VP0_DEBUG opt_vpo.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h NETATALKDEBUG opt_atalk.h SI_DEBUG opt_debug_si.h # Fb options FB_DEBUG opt_fb.h FB_INSTALL_CDEV opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel BLKDEV_IOSIZE opt_global.h BURN_BRIDGES opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_VFS_LOCKS opt_global.h DFLTPHYS opt_global.h DIAGNOSTIC opt_global.h INVARIANT_SUPPORT opt_global.h INVARIANTS opt_global.h MAXPHYS opt_global.h MCLSHIFT opt_global.h MUTEX_DEBUG opt_global.h MUTEX_NOINLINE opt_global.h LOCK_PROFILING opt_global.h LOCK_PROFILING_FAST opt_global.h MSIZE opt_global.h REGRESSION opt_global.h RESTARTABLE_PANICS opt_global.h RWLOCK_NOINLINE opt_global.h SX_NOINLINE opt_global.h VFS_BIO_DEBUG opt_global.h # These are VM related options VM_KMEM_SIZE opt_vm.h VM_KMEM_SIZE_SCALE opt_vm.h VM_KMEM_SIZE_MAX opt_vm.h VM_NRESERVLEVEL opt_vm.h VM_LEVEL_0_ORDER opt_vm.h NO_SWAPPING opt_vm.h MALLOC_MAKE_FAILURES opt_vm.h MALLOC_PROFILE opt_vm.h # The MemGuard replacement allocator used for tamper-after-free detection DEBUG_MEMGUARD opt_vm.h # The RedZone malloc(9) protection DEBUG_REDZONE opt_vm.h # Standard SMP options SMP opt_global.h # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_GATHERDELAY opt_nfs.h NFS_WDELAYHASHSIZ opt_nfs.h NFS_DEBUG opt_nfs.h # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver OVERRIDE_CARD opt_bktr.h OVERRIDE_TUNER opt_bktr.h OVERRIDE_DBX opt_bktr.h OVERRIDE_MSP opt_bktr.h BROOKTREE_SYSTEM_DEFAULT opt_bktr.h BROOKTREE_ALLOC_PAGES opt_bktr.h BKTR_OVERRIDE_CARD opt_bktr.h BKTR_OVERRIDE_TUNER opt_bktr.h BKTR_OVERRIDE_DBX opt_bktr.h BKTR_OVERRIDE_MSP opt_bktr.h BKTR_SYSTEM_DEFAULT opt_bktr.h BKTR_ALLOC_PAGES opt_bktr.h BKTR_USE_PLL opt_bktr.h BKTR_GPIO_ACCESS opt_bktr.h BKTR_NO_MSP_RESET opt_bktr.h BKTR_430_FX_MODE opt_bktr.h BKTR_SIS_VIA_MODE opt_bktr.h BKTR_USE_FREEBSD_SMBUS opt_bktr.h BKTR_NEW_MSP34XX_DRIVER opt_bktr.h BREAK_TO_DEBUGGER opt_comconsole.h ALT_BREAK_TO_DEBUGGER opt_comconsole.h # Options to support PPS UART_PPS_ON_CTS opt_uart.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support USB_DEBUG opt_usb.h USBVERBOSE opt_usb.h USB_EHCI_BIG_ENDIAN_DESC opt_usb.h U3G_DEBUG opt_u3g.h UKBD_DFLT_KEYMAP opt_ukbd.h UPLCOM_INTR_INTERVAL opt_uplcom.h UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h UVSCOM_INTR_INTERVAL opt_uvscom.h # Embedded system options INIT_PATH ROOTDEVNAME FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h KTR opt_global.h KTR_ALQ opt_ktr.h KTR_MASK opt_ktr.h KTR_CPUMASK opt_ktr.h KTR_COMPILE opt_global.h KTR_ENTRIES opt_global.h KTR_VERBOSE opt_ktr.h WITNESS opt_global.h WITNESS_KDB opt_witness.h WITNESS_SKIPSPIN opt_witness.h # options for ACPI support ACPI_DEBUG opt_acpi.h ACPI_MAX_THREADS opt_acpi.h ACPI_NO_SEMAPHORES opt_acpi.h # ISA support DEV_ISA opt_isa.h ISAPNP opt_isa.h # various 'device presence' options. DEV_BPF opt_bpf.h DEV_MCA opt_mca.h DEV_CARP opt_carp.h DEV_PTY opt_tty.h DEV_SPLASH opt_splash.h # EISA support DEV_EISA opt_eisa.h EISA_SLOTS opt_eisa.h # ed driver ED_HPP opt_ed.h ED_3C503 opt_ed.h ED_SIC opt_ed.h # bce driver BCE_DEBUG opt_bce.h SOCKBUF_DEBUG opt_global.h # options for ubsec driver UBSEC_DEBUG opt_ubsec.h UBSEC_RNDTEST opt_ubsec.h UBSEC_NO_RNG opt_ubsec.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # syscons options MAXCONS opt_syscons.h SC_ALT_MOUSE_IMAGE opt_syscons.h SC_CUT_SPACES2TABS opt_syscons.h SC_CUT_SEPCHARS opt_syscons.h SC_DEBUG_LEVEL opt_syscons.h SC_DFLT_FONT opt_syscons.h SC_DISABLE_KDBKEY opt_syscons.h SC_DISABLE_REBOOT opt_syscons.h SC_HISTORY_SIZE opt_syscons.h SC_KERNEL_CONS_ATTR opt_syscons.h SC_KERNEL_CONS_REV_ATTR opt_syscons.h SC_MOUSE_CHAR opt_syscons.h SC_NO_CUTPASTE opt_syscons.h SC_NO_FONT_LOADING opt_syscons.h SC_NO_HISTORY opt_syscons.h SC_NO_MODE_CHANGE opt_syscons.h SC_NO_SUSPEND_VTYSWITCH opt_syscons.h SC_NO_SYSMOUSE opt_syscons.h SC_NORM_ATTR opt_syscons.h SC_NORM_REV_ATTR opt_syscons.h SC_PIXEL_MODE opt_syscons.h SC_RENDER_DEBUG opt_syscons.h SC_TWOBUTTON_MOUSE opt_syscons.h # teken terminal emulator options TEKEN_UTF8 opt_teken.h TEKEN_XTERM opt_teken.h # options for printf PRINTF_BUFR_SIZE opt_printf.h # kbd options KBD_DISABLE_KEYMAP_LOAD opt_kbd.h KBD_INSTALL_CDEV opt_kbd.h KBD_MAXRETRY opt_kbd.h KBD_MAXWAIT opt_kbd.h KBD_RESETDELAY opt_kbd.h KBDIO_DEBUG opt_kbd.h # options for the Atheros driver ATH_DEBUG opt_ath.h ATH_TXBUF opt_ath.h ATH_RXBUF opt_ath.h ATH_DIAGAPI opt_ath.h ATH_TX99_DIAG opt_ath.h # options for the Atheros hal AH_SUPPORT_AR5416 opt_ah.h AH_DEBUG opt_ah.h AH_ASSERT opt_ah.h AH_DEBUG_ALQ opt_ah.h AH_REGOPS_FUNC opt_ah.h AH_WRITE_REGDOMAIN opt_ah.h AH_DEBUG_COUNTRY opt_ah.h AH_WRITE_EEPROM opt_ah.h AH_PRIVATE_DIAG opt_ah.h AH_NEED_DESC_SWAP opt_ah.h AH_USE_INIPDGAIN opt_ah.h AH_MAXCHAN opt_ah.h # options for the Broadcom BCM43xx driver (bwi) BWI_DEBUG opt_bwi.h BWI_DEBUG_VERBOSE opt_bwi.h # options for the Marvell 8335 wireless driver MALO_DEBUG opt_malo.h MALO_TXBUF opt_malo.h MALO_RXBUF opt_malo.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # HWPMC options HWPMC_HOOKS # XBOX options for FreeBSD/i386, but some files are MI XBOX opt_xbox.h # XFS XFS # Interrupt filtering INTR_FILTER # 802.11 support layer IEEE80211_DEBUG opt_wlan.h IEEE80211_DEBUG_REFCNT opt_wlan.h IEEE80211_AMPDU_AGE opt_wlan.h IEEE80211_SUPPORT_SUPERG opt_wlan.h IEEE80211_SUPPORT_TDMA opt_wlan.h # 802.11 TDMA support TDMA_SLOTLEN_DEFAULT opt_tdma.h TDMA_SLOTCNT_DEFAULT opt_tdma.h TDMA_BINTVAL_DEFAULT opt_tdma.h TDMA_TXRATE_11B_DEFAULT opt_tdma.h TDMA_TXRATE_11G_DEFAULT opt_tdma.h TDMA_TXRATE_11A_DEFAULT opt_tdma.h TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h TDMA_TXRATE_HALF_DEFAULT opt_tdma.h TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h TDMA_TXRATE_11NA_DEFAULT opt_tdma.h TDMA_TXRATE_11NG_DEFAULT opt_tdma.h # Virtualize the network stack VIMAGE opt_global.h VIMAGE_GLOBALS opt_global.h # Common Flash Interface (CFI) options CFI_SUPPORT_STRATAFLASH opt_cfi.h CFI_ARMEDANDDANGEROUS opt_cfi.h diff --git a/sys/modules/Makefile b/sys/modules/Makefile index b9c7f1c51987..ef6373a569d1 100644 --- a/sys/modules/Makefile +++ b/sys/modules/Makefile @@ -1,613 +1,616 @@ # $FreeBSD$ .include SUBDIR= ${_3dfx} \ ${_3dfx_linux} \ ${_aac} \ accf_data \ accf_dns \ accf_http \ ${_acpi} \ ae \ age \ ${_agp} \ aha \ ${_ahb} \ ${_aic} \ aic7xxx \ aio \ ${_amd} \ ${_amdtemp} \ ale \ amr \ ${_an} \ ${_aout} \ ${_apm} \ ${_arcmsr} \ ${_arcnet} \ ${_asmc} \ ${_asr} \ ata \ ath \ ${_auxio} \ bce \ bfe \ bge \ ${_bios} \ ${_bktr} \ ${_bm} \ bridgestp \ cam \ ${_canbepm} \ ${_canbus} \ ${_cardbus} \ ${_cbb} \ cd9660 \ cd9660_iconv \ ${_ce} \ ${_ciss} \ ${_cm} \ ${_cmx} \ coda \ coda5 \ ${_coff} \ ${_coretemp} \ ${_cp} \ ${_cpuctl} \ ${_cpufreq} \ ${_crypto} \ ${_cryptodev} \ ${_cs} \ ${_ctau} \ cxgb \ ${_cyclic} \ dc \ dcons \ dcons_crom \ de \ ${_dpms} \ ${_dpt} \ ${_drm} \ ${_dtrace} \ dummynet \ ${_ed} \ ${_elink} \ ${_em} \ en \ ${_ep} \ ${_et} \ ${_ex} \ ${_exca} \ ${_ext2fs} \ fatm \ fdc \ fdescfs \ ${_fe} \ firewire \ firmware \ fxp \ gem \ geom \ ${_glxsb} \ hatm \ hifn \ hme \ ${_hptiop} \ ${_hptmv} \ ${_hptrr} \ hwpmc \ ${_i2c} \ ${_ibcs2} \ ${_ichwd} \ ${_ida} \ ${_ie} \ if_bridge \ if_disc \ if_edsc \ if_ef \ if_faith \ if_gif \ if_gre \ if_lagg \ ${_if_ndis} \ if_stf \ if_tap \ if_tun \ if_vlan \ ${_igb} \ ${_iir} \ ${_io} \ ipdivert \ ${_ipfilter} \ ipfw \ ipfw_nat \ ${_ipmi} \ ip_mroute_mod \ ${_ips} \ ${_ipw} \ ${_ipwfw} \ iscsi \ isp \ ispfw \ ${_iwi} \ ${_iwifw} \ ${_iwn} \ ${_iwnfw} \ ${_ixgb} \ jme \ joy \ kbdmux \ krpc \ ksyms \ le \ lge \ libalias \ libiconv \ libmbpool \ libmchain \ ${_linprocfs} \ ${_linsysfs} \ ${_linux} \ lmc \ lpt \ mac_biba \ mac_bsdextended \ mac_ifoff \ mac_lomac \ mac_mls \ mac_none \ mac_partition \ mac_portacl \ mac_seeotheruids \ mac_stub \ mac_test \ malo \ mcd \ md \ mem \ mfi \ mii \ mlx \ ${_mly} \ mmc \ mmcsd \ mpt \ mqueue \ msdosfs \ msdosfs_iconv \ ${_mse} \ msk \ mxge \ my \ ${_ncp} \ ${_ncv} \ ${_ndis} \ netgraph \ ${_nfe} \ + nfscl \ nfsclient \ + nfscommon \ + nfsd \ nfslockd \ nfsserver \ nfssvc \ nge \ nmdm \ ${_nsp} \ ntfs \ ntfs_iconv \ nullfs \ ${_nve} \ ${_nvram} \ ${_nwfs} \ ${_nxge} \ ${_opensolaris} \ ${_padlock} \ patm \ ${_pccard} \ ${_pcfclock} \ pcn \ ${_pf} \ ${_pflog} \ plip \ ${_pmc} \ portalfs \ ppbus \ ppc \ ppi \ pps \ procfs \ pseudofs \ ${_pst} \ puc \ ral \ ralfw \ ${_random} \ rc4 \ ${_rdma} \ re \ reiserfs \ rl \ ${_s3} \ ${_safe} \ ${_sbni} \ scc \ scd \ ${_scsi_low} \ sdhci \ sem \ sf \ sis \ sk \ ${_smbfs} \ sn \ ${_snc} \ snp \ ${_sound} \ ${_speaker} \ ${_splash} \ ${_sppp} \ ste \ ${_stg} \ stge \ ${_streams} \ ${_svr4} \ sym \ ${_syscons} \ sysvipc \ ti \ tl \ ${_tmpfs} \ trm \ ${_twa} \ twe \ tx \ txp \ uart \ ubsec \ udf \ udf_iconv \ ${_ufs} \ unionfs \ usb \ utopia \ ${_vesa} \ vge \ vkbd \ ${_vpo} \ vr \ vx \ wb \ ${_wi} \ wlan \ wlan_acl \ wlan_amrr \ wlan_ccmp \ wlan_rssadapt \ wlan_tkip \ wlan_wep \ wlan_xauth \ ${_wpi} \ ${_wpifw} \ ${_xe} \ xfs \ xl \ ${_zfs} \ zlib \ .if ${MACHINE_ARCH} != "powerpc" _syscons= syscons _vpo= vpo .endif .if defined(ALL_MODULES) _ufs= ufs .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${.CURDIR}/../opencrypto) _crypto= crypto _cryptodev= cryptodev .endif .if exists(${.CURDIR}/../crypto) _random= random .endif .endif .if ${MK_IPFILTER} != "no" || defined(ALL_MODULES) _ipfilter= ipfilter .endif .if ${MK_PF} != "no" || defined(ALL_MODULES) _pf= pf _pflog= pflog .endif .if ${MACHINE_ARCH} == "i386" # XXX some of these can move to the general case when de-i386'ed # XXX some of these can move now, but are untested on other architectures. _3dfx= 3dfx _3dfx_linux= 3dfx_linux _agp= agp _aic= aic _amd= amd _an= an _aout= aout _apm= apm _arcnet= arcnet _bktr= bktr _cardbus= cardbus _cbb= cbb _ce= ce _coff= coff _cp= cp _cpuctl= cpuctl _cpufreq= cpufreq _cs= cs .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _cyclic= cyclic .endif _dpms= dpms _drm= drm .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _dtrace= dtrace .endif _ed= ed _elink= elink _em= em _ep= ep _et= et _exca= exca _ext2fs= ext2fs _fe= fe _glxsb= glxsb _i2c= i2c _ibcs2= ibcs2 _ie= ie _if_ndis= if_ndis _igb= igb _io= io _linprocfs= linprocfs _linsysfs= linsysfs _linux= linux _mse= mse .if ${MK_NCP} != "no" _ncp= ncp .endif _ncv= ncv _ndis= ndis _nsp= nsp .if ${MK_NCP} != "no" _nwfs= nwfs .endif .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _opensolaris= opensolaris .endif _pccard= pccard _pcfclock= pcfclock _pst= pst _rdma= rdma _safe= safe _sbni= sbni _scsi_low= scsi_low _smbfs= smbfs _sound= sound _speaker= speaker _splash= splash _sppp= sppp _stg= stg _streams= streams _svr4= svr4 _tmpfs= tmpfs _wi= wi _xe= xe .if ${MK_ZFS} != "no" || defined(ALL_MODULES) _zfs= zfs .endif .if ${MACHINE} == "i386" _aac= aac _acpi= acpi _ahb= ahb _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc _asr= asr _bios= bios _ciss= ciss _cm= cm _cmx= cmx _coretemp= coretemp _ctau= ctau _dpt= dpt _ex= ex _hptiop= hptiop _hptmv= hptmv _hptrr= hptrr _ichwd= ichwd _ida= ida _iir= iir _ipmi= ipmi _ips= ips _ipw= ipw _ipwfw= ipwfw _iwi= iwi _iwifw= iwifw _iwn= iwn _iwnfw= iwnfw _ixgb= ixgb _mly= mly _nfe= nfe _nve= nve _nvram= nvram _nxge= nxge _wpi= wpi _wpifw= wpifw .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${.CURDIR}/../crypto/via) _padlock= padlock .endif .endif _s3= s3 _twa= twa _vesa= vesa .elif ${MACHINE} == "pc98" _canbepm= canbepm _canbus= canbus _pmc= pmc _snc= snc .endif .endif .if ${MACHINE_ARCH} == "amd64" _aac= aac _acpi= acpi _agp= agp _an= an _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc _cardbus= cardbus _cbb= cbb _cmx= cmx _ciss= ciss _coretemp= coretemp _cpuctl= cpuctl _cpufreq= cpufreq .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _cyclic= cyclic .endif _drm= drm .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _dtrace= dtrace .endif _ed= ed _et= et _em= em _exca= exca _ext2fs= ext2fs _hptiop= hptiop _hptmv= hptmv _hptrr= hptrr _i2c= i2c _ichwd= ichwd _ida= ida _if_ndis= if_ndis _igb= igb _iir= iir _io= io _ipmi= ipmi _ips= ips _ipw= ipw _ipwfw= ipwfw _iwn= iwn _iwnfw= iwnfw _ixgb= ixgb _linprocfs= linprocfs _linsysfs= linsysfs _linux= linux _mly= mly _ndis= ndis _nfe= nfe _nve= nve _nvram= nvram _nxge= nxge .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _opensolaris= opensolaris .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${.CURDIR}/../crypto/via) _padlock= padlock .endif .endif _pccard= pccard _rdma= rdma _safe= safe _scsi_low= scsi_low _smbfs= smbfs _sound= sound _speaker= speaker _sppp= sppp _tmpfs= tmpfs _twa= twa _wi= wi _wpi= wpi _wpifw= wpifw .if ${MK_ZFS} != "no" || defined(ALL_MODULES) _zfs= zfs .endif .endif .if ${MACHINE_ARCH} == "ia64" # Modules not enabled on ia64 (as compared to i386) include: # aac acpi aout apm atspeaker drm ibcs2 linprocfs linux ncv # nsp s3 sbni stg vesa # acpi is not enabled because it is broken as a module on ia64 _aic= aic _an= an _arcnet= arcnet _asr= asr _bktr= bktr _cardbus= cardbus _cbb= cbb _ciss= ciss _cm= cm _cmx= cmx _coff= coff _cpufreq= cpufreq _em= em _ep= ep _exca= exca _fe= fe _igb= igb _iir= iir _mly= mly _pccard= pccard _scsi_low= scsi_low _smbfs= smbfs _sound= sound _splash= splash _sppp= sppp _streams= streams _wi= wi _xe= xe .endif .if ${MACHINE_ARCH} == "powerpc" _an= an _bm= bm _nvram= powermac_nvram _smbfs= smbfs _sound= sound .endif .if ${MACHINE_ARCH} == "sparc64" _auxio= auxio _em= em _i2c= i2c _igb= igb .if ${MK_CDDL} != "no" || defined(ALL_MODULES) _opensolaris= opensolaris .endif _sound= sound .if ${MK_ZFS} != "no" || defined(ALL_MODULES) _zfs= zfs .endif .endif .if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES) SUBDIR=${MODULES_OVERRIDE} .endif .for reject in ${WITHOUT_MODULES} SUBDIR:= ${SUBDIR:N${reject}} .endfor # Calling kldxref(8) for each module is expensive. .if !defined(NO_XREF) .MAKEFLAGS+= -DNO_XREF afterinstall: @if type kldxref >/dev/null 2>&1; then \ ${ECHO} kldxref ${DESTDIR}${KMODDIR}; \ kldxref ${DESTDIR}${KMODDIR}; \ fi .endif .include diff --git a/sys/modules/nfscl/Makefile b/sys/modules/nfscl/Makefile new file mode 100644 index 000000000000..66d5d932e1b6 --- /dev/null +++ b/sys/modules/nfscl/Makefile @@ -0,0 +1,26 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../fs/nfsclient +KMOD= nfscl +SRCS= vnode_if.h \ + nfs_clrpcops.c \ + nfs_clkrpc.c \ + nfs_clstate.c \ + nfs_clcomsubs.c \ + nfs_clport.c \ + nfs_clbio.c \ + nfs_cllock.c \ + nfs_clnfsiod.c \ + nfs_clnode.c \ + nfs_clsubs.c \ + nfs_clvfsops.c \ + nfs_clvnops.c \ + opt_inet.h \ + opt_inet6.h \ + opt_bootp.h \ + opt_nfsroot.h \ + opt_nfs.h \ + opt_ufs.h \ + opt_kgssapi.h + +.include diff --git a/sys/modules/nfscommon/Makefile b/sys/modules/nfscommon/Makefile new file mode 100644 index 000000000000..a3d75a72cb2c --- /dev/null +++ b/sys/modules/nfscommon/Makefile @@ -0,0 +1,15 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../fs/nfs +KMOD= nfscommon +SRCS= vnode_if.h \ + nfs_commonacl.c \ + nfs_commonkrpc.c \ + nfs_commonport.c \ + nfs_commonsubs.c \ + opt_kgssapi.h \ + opt_ufs.h \ + opt_inet6.h \ + opt_nfs.h + +.include diff --git a/sys/modules/nfsd/Makefile b/sys/modules/nfsd/Makefile new file mode 100644 index 000000000000..08d302a2ab5b --- /dev/null +++ b/sys/modules/nfsd/Makefile @@ -0,0 +1,18 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../fs/nfsserver +KMOD= nfsd +SRCS= vnode_if.h \ + nfs_nfsdserv.c \ + nfs_nfsdcache.c \ + nfs_nfsdkrpc.c \ + nfs_nfsdsocket.c \ + nfs_nfsdstate.c \ + nfs_nfsdsubs.c \ + nfs_nfsdport.c \ + opt_ufs.h \ + opt_nfs.h \ + opt_inet6.h \ + opt_kgssapi.h + +.include