diff --git a/sys/amd64/conf/NOTES b/sys/amd64/conf/NOTES index c99aae19f10e..49d2bec91364 100644 --- a/sys/amd64/conf/NOTES +++ b/sys/amd64/conf/NOTES @@ -1,629 +1,629 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # DTrace core # NOTE: introduces CDDL-licensed components into the kernel #device dtrace # DTrace modules #device dtrace_profile #device dtrace_sdt #device dtrace_fbt #device dtrace_systrace #device dtrace_prototype #device dtnfscl #device dtmalloc # Alternatively include all the DTrace modules #device dtraceall ##################################################################### # SMP OPTIONS: # # Notes: # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Optional: options IPI_PREEMPTION device atpic # Optional legacy pic support device mptable # Optional MPSPEC mptable support # Debugging options. # options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu HAMMER # aka K8, aka Opteron & Athlon64 # # Options for CPU features. # ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING # BPF_JITTER adds support for BPF just-in-time compiler. options BPF_JITTER ##################################################################### # CLOCK OPTIONS # Provide read/write access to the memory in the clock chip. device nvram # Access to rtc cmos via /dev/nvram ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device speaker #Play IBM BASIC-style noises out your speaker envvar hint.speaker.0.at="isa" envvar hint.speaker.0.port="0x61" ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # AGP GART support device agp # # AGP debugging. # options AGP_DEBUG ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG device dpms # DPMS suspend & resume via VESA BIOS # x86 real mode BIOS emulator, required by atkbdc/dpms/vesa options X86BIOS # # Optional devices: # # PS/2 mouse device psm envvar hint.psm.0.at="atkbdc" envvar hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc envvar hint.atkbdc.0.at="isa" envvar hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd envvar hint.atkbd.0.at="atkbdc" envvar hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga envvar hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG # vt(4) drivers. device vt_vga # VGA device vt_efifb # EFI framebuffer device vt_vbefb # VBE framebuffer # Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA. device s3pci # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # device tdfx # Enable 3Dfx Voodoo support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). device acpi options ACPI_DEBUG # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # # Network interfaces: # # axp: AMD EPYC integrated NIC # Requires the miibus module # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # ice: Intel 800 Series Physical Function # Requires the ice_ddp module for full functionality # igc: Intel I225 2.5Gb Ethernet adapter # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # Requires the ipw firmware module # irdma: Intel 800 Series RDMA driver # Requires the ice module # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # Requires the iwi firmware module # iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn # 802.11 network adapters # Requires the iwn firmware module # mthca: Mellanox HCA InfiniBand # mlx4ib: Mellanox ConnectX HCA InfiniBand # mlx4en: Mellanox ConnectX HCA Ethernet # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # qlxgb: QLogic 3200 and 8200 series 10 Gigabit Ethernet & CNA Adapter # qlxgbe: QLogic 8300 series 10 Gigabit Ethernet & CNA Adapter # qlxge: QLogic 8100 series 10 Gigabit Ethernet & CNA Adapter # qlnxe: Cavium QLogic 41000/45000 series 10/25/40/100 Gigabit Ethernet & CNA Adapter # sfxge: Solarflare SFC9000 family 10Gb Ethernet adapters # vmx: VMware VMXNET3 Ethernet (BSD open source) # wpi: Intel 3945ABG Wireless LAN controller # Requires the wpi firmware module device axp # AMD EPYC integrated NIC device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device igc # Intel I225 2.5G Ethernet device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device ixl # Intel 700 Series Physical Function device iavf # Intel Adaptive Virtual Function device ice # Intel 800 Series Physical Function device ice_ddp # Intel 800 Series DDP Package device irdma # Intel 800 Series RDMA driver device mthca # Mellanox HCA InfiniBand device mlx4 # Shared code module between IB and Ethernet device mlx4ib # Mellanox ConnectX HCA InfiniBand device mlx4en # Mellanox ConnectX HCA Ethernet device nfe # nVidia nForce MCP on-board Ethernet device qlxgb # QLogic 3200/8200 Ethernet device qlxgbe # QLogic 8300 Ethernet device qlxge # QLogic 8100 Ethernet device qlnxe # QLogic 41000/45000 Ethernet device sfxge # Solarflare SFC9000 10Gb Ethernet device vmx # VMware VMXNET3 Ethernet device wpi # Intel 3945ABG wireless NICs. # IEEE 802.11 adapter firmware modules # Intel PRO/Wireless 2100 firmware: # ipwfw: BSS/IBSS/monitor mode firmware # ipwbssfw: BSS mode firmware # ipwibssfw: IBSS mode firmware # ipwmonitorfw: Monitor mode firmware # Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware: # iwifw: BSS/IBSS/monitor mode firmware # iwibssfw: BSS mode firmware # iwiibssfw: IBSS mode firmware # iwimonitorfw: Monitor mode firmware # Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware: # iwnfw: Single module to support all devices # iwn1000fw: Specific module for the 1000 only # iwn105fw: Specific module for the 105 only # iwn135fw: Specific module for the 135 only # iwn2000fw: Specific module for the 2000 only # iwn2030fw: Specific module for the 2030 only # iwn4965fw: Specific module for the 4965 only # iwn5000fw: Specific module for the 5000 only # iwn5150fw: Specific module for the 5150 only # iwn6000fw: Specific module for the 6000 only # iwn6000g2afw: Specific module for the 6000g2a only # iwn6000g2bfw: Specific module for the 6000g2b only # iwn6050fw: Specific module for the 6050 only # wpifw: Intel 3945ABG Wireless LAN Controller firmware device iwifw device iwibssfw device iwiibssfw device iwimonitorfw device ipwfw device ipwbssfw device ipwibssfw device ipwmonitorfw device iwnfw device iwn1000fw device iwn105fw device iwn135fw device iwn2000fw device iwn2030fw device iwn4965fw device iwn5000fw device iwn5150fw device iwn6000fw device iwn6000g2afw device iwn6000g2bfw device iwn6050fw device wpifw # # Non-Transparent Bridge (NTB) drivers # device if_ntb # Virtual NTB network interface device ntb_transport # NTB packet transport driver device ntb # NTB hardware interface device ntb_hw_amd # AMD NTB hardware driver device ntb_hw_intel # Intel NTB hardware driver device ntb_hw_plx # PLX NTB hardware driver # #XXX this stores pointers in a 32bit field that is defined by the hardware #device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # Microsemi smartpqi controllers. # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device smartpqi # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Highpoint RocketRAID 27xx. device hpt27xx # # Highpoint RocketRAID 182x. device hptmv # # Highpoint DC7280 and R750. device hptnr # # Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340, # RR2210, RR174x, RR2522, RR231x, RR230x. device hptrr # # Highpoint RocketRaid 3xxx series SATA RAID device hptiop # # IBM (now Adaptec) ServeRAID controllers device ips # # Intel integrated Memory Controller (iMC) SMBus controller # Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon device imcsmb # # Intel C600 (Patsburg) integrated SAS controller device isci options ISCI_LOGGING # enable debugging in isci HAL # # Intel Volume Management Device (VMD) support device vmd # # PMC-Sierra SAS/SATA controller device pmspcv # # Intel QuickAssist driver with OpenCrypto support # # Only for legacy Atom C2XXX chipsets. device qat_c2xxx # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # Google Virtual NIC device gve # Google Virtual NIC (gVNIC) driver # Microsoft Hyper-V enhancement support device hyperv # HyperV drivers device hvhid # HyperV HID device # Xen HVM Guest Optimizations options XENHVM # Xen HVM kernel infrastructure device xenefi # Xen EFI timer device device xenpci # Xen HVM Hypervisor services driver device xentimer # Xen x86 PV timer device ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) # smbios: DMI/SMBIOS entry point (requires EFIRT option) # vpd: Vital Product Data kernel interface # asmc: Apple System Management Controller # si: Specialix International SI/XIO or SX intelligent serial card # tpm: Trusted Platform Module # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. device ipmi device pbio envvar hint.pbio.0.at="isa" envvar hint.pbio.0.port="0x360" device smbios device vpd device asmc device tpm device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device aesni # AES-NI OpenCrypto module device ossl # OpenSSL OpenCrypto module device ioat # Intel I/OAT DMA engine # # Laptop/Notebook options: # device backlight # # I2C Bus # # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # amdsbwd: AMD SB7xx watchdog timer # viawd: VIA south bridge watchdog timer # wbwd: Winbond watchdog timer # itwd: ITE Super I/O watchdog timer # device ichwd device amdsbwd device viawd device wbwd device itwd # # Temperature sensors: # # coretemp: on-die sensor on Intel Core and newer CPUs # amdtemp: on-die sensor on AMD K8/K10/K11 CPUs # device coretemp device amdtemp # # CPU control pseudo-device. Provides access to MSRs, CPUID info and # microcode update feature. # device cpuctl # # SuperIO driver. # device superio # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # AMD System Management Network (SMN) # device amdsmn -# -# Number of initial kernel page table pages used for early bootstrap. -# This number should include enough pages to map the kernel and any -# modules or other data loaded with the kernel by the loader. Each -# page table page maps 2MB. -# -options NKPT=31 - # EFI Runtime Services support options EFIRT # EFI pseudo-device device efidev # EFI RTC device efirtc # # HID-over-I2C support # device iichid # HID-over-I2C support options IICHID_DEBUG # Enable HID-over-I2C debug messages options IICHID_SAMPLING # Workaround missing GPIO INTR support ##################################################################### # ABI Emulation # Enable 32-bit runtime support for FreeBSD/i386 binaries. options COMPAT_FREEBSD32 # Enable (32-bit) a.out binary support options COMPAT_AOUT ##################################################################### # ZFS support # NB: This depends on crypto, cryptodev and ZSTDIO options ZFS ##################################################################### # VM OPTIONS +# +# Number of initial kernel page table pages used for early bootstrap. +# This number should include enough pages to map the kernel and any +# modules or other data loaded with the kernel by the loader. Each +# page table page maps 2MB. +# +options NKPT=31 + # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=5 # Enable detailed accounting by the PV entry allocator. options PV_STATS ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE # GCOV (code coverage) support options LINDEBUGFS options GCOV diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index dc3107349711..8f6098301b12 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -1,837 +1,837 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # DTrace core # NOTE: introduces CDDL-licensed components into the kernel #device dtrace # DTrace modules #device dtrace_profile #device dtrace_sdt #device dtrace_fbt #device dtrace_systrace #device dtrace_prototype #device dtnfscl #device dtmalloc # Alternatively include all the DTrace modules #device dtraceall ##################################################################### # SMP OPTIONS: # # The apic device enables the use of the I/O APIC for interrupt delivery. # The apic device can be used in both UP and SMP kernels, but is required # for SMP kernels. Thus, the apic device is not strictly an SMP option, # but it is a prerequisite for SMP. # # Notes: # # HTT CPUs should only be used if they are enabled in the BIOS. For # the ACPI case, ACPI only correctly tells us about any HTT CPUs if # they are enabled. However, most HTT systems do not list HTT CPUs # in the MP Table if they are enabled, thus we guess at the HTT CPUs # for the MP Table case. However, we shouldn't try to guess and use # these CPUs if HTT is disabled. Thus, HTT guessing is only enabled # for the MP Table if the user explicitly asks for it via the # MPTABLE_FORCE_HTT option. Do NOT use this option if you have HTT # disabled in your BIOS. # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Mandatory: device apic # I/O apic # Optional: options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table options IPI_PREEMPTION # Debugging options. # options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu I486_CPU cpu I586_CPU # aka Pentium(tm) cpu I686_CPU # aka Pentium Pro(tm) # # Options for CPU features. # # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has # forgotten to enable them. # # CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning # CPU if CPU supports it. The default is double-clock mode on # BlueLightning CPU box. # # CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM # BlueLightning CPU. It works only with Cyrix FPU, and this option # should not be used with Intel FPU. # # CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). # # CPU_CYRIX_NO_LOCK enables weak locking for the entire address space # of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. # Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) # # CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct # mapped mode. Default is 2-way set associative mode. # # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables # reorder). This option should not be used if you use memory mapped # I/O device(s). # # CPU_ELAN enables support for AMDs ElanSC520 CPU. # CPU_ELAN_PPS enables precision timestamp code. # CPU_ELAN_XTAL sets the clock crystal frequency in Hz. # # CPU_ENABLE_LONGRUN enables support for Transmeta Crusoe LongRun # technology which allows to restrict power consumption of the CPU by # using group of hw.crusoe.* sysctls. # # CPU_FASTER_5X86_FPU enables faster FPU exception handler. # # CPU_GEODE is for the SC1100 Geode embedded processor. This option # is necessary because the i8254 timecounter is toast. # # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products # for i386 machines. # # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively # (no clock delay). # # CPU_L2_LATENCY specifies the L2 cache latency value. This option is used # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. # The default value is 5. # # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE # 1). # # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option # is useful when you use Socket 8 to Socket 370 converter, because most Pentium # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. # # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). # # CPU_SOEKRIS enables support www.soekris.com hardware. # # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU # enters suspend mode following execution of HALT instruction. # # CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). # # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD # K5/K6/K6-2 CPUs. # # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache # flush at hold state. # # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs # without cache flush at hold state, and (2) write-back CPU cache on # Cyrix 6x86 whose revision < 2.7 (NOTE 2). # # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is # executed. This option is only needed if I586_CPU is also defined, # and should be included for any non-Pentium CPU that defines it. # # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors # which indicates that the 15-16MB range is *definitely* not being # occupied by an ISA memory hole. # # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. # These options may crash your system. # # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled # in write-through mode when revision < 2.7. If revision of Cyrix # 6x86 >= 2.7, CPU cache is always enabled in write-back mode. # # NOTE 3: This option may cause failures for software that requires # locked cycles in order to operate correctly. # options CPU_ATHLON_SSE_HACK options CPU_BLUELIGHTNING_3X options CPU_BLUELIGHTNING_FPU_OP_CACHE options CPU_BTB_EN options CPU_DIRECT_MAPPED_CACHE options CPU_DISABLE_5X86_LSSER options CPU_ELAN options CPU_ELAN_PPS options CPU_ELAN_XTAL=32768000 options CPU_ENABLE_LONGRUN options CPU_FASTER_5X86_FPU options CPU_GEODE options CPU_I486_ON_386 options CPU_IORT options CPU_L2_LATENCY=5 options CPU_LOOP_EN options CPU_PPRO2CELERON options CPU_RSTK_EN options CPU_SOEKRIS options CPU_SUSP_HLT options CPU_UPGRADE_HW_CACHE options CPU_WT_ALLOC options CYRIX_CACHE_WORKS options CYRIX_CACHE_REALLY_WORKS #options NO_F00F_HACK # Debug options options NPX_DEBUG # enable npx debugging # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING # BPF_JITTER adds support for BPF just-in-time compiler. options BPF_JITTER ##################################################################### # CLOCK OPTIONS # Provide read/write access to the memory in the clock chip. device nvram # Access to rtc cmos via /dev/nvram ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device speaker #Play IBM BASIC-style noises out your speaker envvar hint.speaker.0.at="isa" envvar hint.speaker.0.port="0x61" ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # AGP GART support device agp # AGP debugging. options AGP_DEBUG ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG device dpms # DPMS suspend & resume via VESA BIOS # x86 real mode BIOS emulator, required by atkbdc/dpms/vesa options X86BIOS # # Hints for the non-optional Numeric Processing eXtension driver. envvar hint.npx.0.flags="0x0" envvar hint.npx.0.irq="13" # # `flags' for npx0: # 0x01 don't use the npx registers to optimize bcopy. # 0x02 don't use the npx registers to optimize bzero. # 0x04 don't use the npx registers to optimize copyin or copyout. # The npx registers are normally used to optimize copying and zeroing when # all of the following conditions are satisfied: # I586_CPU is an option # the cpu is an i586 (perhaps not a Pentium) # the probe for npx0 succeeds # INT 16 exception handling works. # Then copying and zeroing using the npx registers is normally 30-100% faster. # The flags can be used to control cases where it doesn't work or is slower. # Setting them at boot time using hints works right (the optimizations # are not used until later in the bootstrap when npx0 is attached). # Flag 0x08 automatically disables the i586 optimized routines. # # # Optional devices: # # PS/2 mouse device psm envvar hint.psm.0.at="atkbdc" envvar hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc envvar hint.atkbdc.0.at="isa" envvar hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd envvar hint.atkbd.0.at="atkbdc" envvar hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga envvar hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG # vt(4) drivers. device vt_vga device vt_vbefb # Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA. device s3pci # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # # To enable Linuxulator support, one must also load linux.ko and tdfx_linux.ko. device tdfx # Enable 3Dfx Voodoo support options IOMMU # Enable IOMMU support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). device acpi options ACPI_DEBUG # ACPI WMI Mapping driver device acpi_wmi # ACPI Asus Extras (LCD backlight/brightness, video output, etc.) device acpi_asus # ACPI Fujitsu Extras (Buttons) device acpi_fujitsu # ACPI extras driver for HP laptops device acpi_hp # ACPI extras driver for IBM laptops device acpi_ibm # ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.) device acpi_panasonic # ACPI Sony extra (LCD brightness) device acpi_sony # ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.) device acpi_toshiba # ACPI Video Extensions (LCD backlight/brightness, video output, etc.) device acpi_video # ACPI Docking Station device acpi_dock # ACPI ASOC ATK0110 ASUSTeK AI Booster (voltage, temperature and fan sensors) device aibs # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # # Network interfaces: # # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # igc: Intel I225 2.5G Ethernet adapter # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # Requires the iwi firmware module # iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn # 802.11 network adapters # Requires the iwn firmware module # mthca: Mellanox HCA InfiniBand # mlx4ib: Mellanox ConnectX HCA InfiniBand # mlx4en: Mellanox ConnectX HCA Ethernet # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # sbni: Granch SBNI12-xx ISA and PCI adapters # vmx: VMware VMXNET3 Ethernet (BSD open source) # wpi: Intel 3945ABG Wireless LAN controller # Requires the wpi firmware module # Order for ISA/EISA devices is important here device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE envvar hint.cs.0.at="isa" envvar hint.cs.0.port="0x300" envvar hint.ed.0.at="isa" envvar hint.ed.0.port="0x280" envvar hint.ed.0.irq="5" envvar hint.ed.0.maddr="0xd8000" device igc # Intel I225 2.5G Ethernet device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. # Hint for the i386-only ISA front-end of le(4). envvar hint.le.0.at="isa" envvar hint.le.0.port="0x280" envvar hint.le.0.irq="10" envvar hint.le.0.drq="0" device mthca # Mellanox HCA InfiniBand device mlx4 # Shared code module between IB and Ethernet device mlx4ib # Mellanox ConnectX HCA InfiniBand device mlx4en # Mellanox ConnectX HCA Ethernet device nfe # nVidia nForce MCP on-board Ethernet device sbni envvar hint.sbni.0.at="isa" envvar hint.sbni.0.port="0x210" envvar hint.sbni.0.irq="0xefdead" envvar hint.sbni.0.flags="0" device vmx # VMware VMXNET3 Ethernet device wpi # Intel 3945ABG wireless NICs. # IEEE 802.11 adapter firmware modules # Intel PRO/Wireless 2100 firmware: # ipwfw: BSS/IBSS/monitor mode firmware # ipwbssfw: BSS mode firmware # ipwibssfw: IBSS mode firmware # ipwmonitorfw: Monitor mode firmware # Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware: # iwifw: BSS/IBSS/monitor mode firmware # iwibssfw: BSS mode firmware # iwiibssfw: IBSS mode firmware # iwimonitorfw: Monitor mode firmware # Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware: # iwnfw: Single module to support all devices # iwn1000fw: Specific module for the 1000 only # iwn105fw: Specific module for the 105 only # iwn135fw: Specific module for the 135 only # iwn2000fw: Specific module for the 2000 only # iwn2030fw: Specific module for the 2030 only # iwn4965fw: Specific module for the 4965 only # iwn5000fw: Specific module for the 5000 only # iwn5150fw: Specific module for the 5150 only # iwn6000fw: Specific module for the 6000 only # iwn6000g2afw: Specific module for the 6000g2a only # iwn6000g2bfw: Specific module for the 6000g2b only # iwn6050fw: Specific module for the 6050 only # wpifw: Intel 3945ABG Wireless LAN Controller firmware device iwifw device iwibssfw device iwiibssfw device iwimonitorfw device ipwfw device ipwbssfw device ipwibssfw device ipwmonitorfw device iwnfw device iwn1000fw device iwn105fw device iwn135fw device iwn2000fw device iwn2030fw device iwn4965fw device iwn5000fw device iwn5150fw device iwn6000fw device iwn6000g2afw device iwn6000g2bfw device iwn6050fw device wpifw # # Non-Transparent Bridge (NTB) drivers # device if_ntb # Virtual NTB network interface device ntb_transport # NTB packet transport driver device ntb # NTB hardware interface device ntb_hw_amd # AMD NTB hardware driver device ntb_hw_intel # Intel NTB hardware driver device ntb_hw_plx # PLX NTB hardware driver # # ATA raid adapters # device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Adaptec by PMC RAID controllers, Series 6/7/8 and upcoming families device aacraid # Container interface, CAM required # # Highpoint RocketRAID 27xx. device hpt27xx # # Highpoint RocketRAID 182x. device hptmv # # Highpoint DC7280 and R750. device hptnr # # Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340, # RR2210, RR174x, RR2522, RR231x, RR230x. device hptrr # # Highpoint RocketRaid 3xxx series SATA RAID device hptiop # # Intel integrated Memory Controller (iMC) SMBus controller # Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon device imcsmb # # IBM (now Adaptec) ServeRAID controllers device ips # # Intel C600 (Patsburg) integrated SAS controller device isci options ISCI_LOGGING # enable debugging in isci HAL # # Intel Volume Management Device (VMD) support device vmd # # PMC-Sierra SAS/SATA controller device pmspcv # # glxiic is an I2C driver for the AMD Geode LX CS5536 System Management Bus # controller. Requires 'device iicbus'. # device glxiic # AMD Geode LX CS5536 System Management Bus # # glxsb is a driver for the Security Block in AMD Geode LX processors. # Requires 'device crypto'. # device glxsb # AMD Geode LX Security Block # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # Google Virtual NIC device gve # Google Virtual NIC (gVNIC) driver device hyperv # HyperV drivers device hvhid # HyperV HID device ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # smapi: System Management Application Program Interface driver # smbios: DMI/SMBIOS entry point # vpd: Vital Product Data kernel interface # pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) # asmc: Apple System Management Controller # si: Specialix International SI/XIO or SX intelligent serial card driver # tpm: Trusted Platform Module # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. device ipmi device smapi device smbios device vpd device pbio envvar hint.pbio.0.at="isa" envvar hint.pbio.0.port="0x360" device asmc device tpm device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device aesni # AES-NI OpenCrypto module device ossl # OpenSSL OpenCrypto module # # Laptop/Notebook options: # # See also: # apm under `Miscellaneous hardware' # above. device backlight # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller # device pcf envvar hint.pcf.0.at="isa" envvar hint.pcf.0.port="0x320" envvar hint.pcf.0.irq="5" # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # amdsbwd: AMD SB7xx watchdog timer # viawd: VIA south bridge watchdog timer # wbwd: Winbond watchdog timer # itwd: ITE Super I/O watchdog timer # device ichwd device amdsbwd device viawd device wbwd device itwd # # Temperature sensors: # # coretemp: on-die sensor on Intel Core and newer CPUs # amdtemp: on-die sensor on AMD K8/K10/K11 CPUs # device coretemp device amdtemp # # CPU control pseudo-device. Provides access to MSRs, CPUID info and # microcode update feature. # device cpuctl # # SuperIO driver. # device superio # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver +# +# HID-over-I2C support +# +device iichid # HID-over-I2C support +options IICHID_DEBUG # Enable HID-over-I2C debug messages +options IICHID_SAMPLING # Workaround missing GPIO INTR support + +##################################################################### +# ABI Emulation + +# Enable (32-bit) a.out binary support +options COMPAT_AOUT + +##################################################################### +# VM OPTIONS + # # Set the number of PV entries per process. Increasing this can # stop panics related to heavy use of shared memory. However, that can # (combined with large amounts of physical memory) cause panics at # boot time due the kernel running out of VM space. # # If you're tweaking this, you might also want to increase the sysctls # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". # # The value below is the one more than the default. # options PMAP_SHPGPERPROC=201 # # Number of initial kernel page table pages used for early bootstrap. # This number should include enough pages to map the kernel, any # modules or other data loaded with the kernel by the loader, and data # structures allocated before the VM system is initialized such as the # vm_page_t array. Each page table page maps 4MB (2MB with PAE). # options NKPT=31 -# -# HID-over-I2C support -# -device iichid # HID-over-I2C support -options IICHID_DEBUG # Enable HID-over-I2C debug messages -options IICHID_SAMPLING # Workaround missing GPIO INTR support - -##################################################################### -# ABI Emulation - -# Enable (32-bit) a.out binary support -options COMPAT_AOUT - -##################################################################### -# VM OPTIONS - # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=5 # Enable detailed accounting by the PV entry allocator. options PV_STATS ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE ##################################################################### # Items broken on i386 that are generally available elsewhere # Device uses bus_read_8 and friends, so can't work. Remove it from lint. nodevice bnxt