diff --git a/config/kernel-vfs-migratepage.m4 b/config/kernel-vfs-migratepage.m4 new file mode 100644 index 000000000000..05db3af511eb --- /dev/null +++ b/config/kernel-vfs-migratepage.m4 @@ -0,0 +1,27 @@ +dnl # +dnl # Linux 6.0 gets rid of address_space_operations.migratepage +dnl # +AC_DEFUN([ZFS_AC_KERNEL_SRC_VFS_MIGRATEPAGE], [ + ZFS_LINUX_TEST_SRC([vfs_has_migratepage], [ + #include + #include + + static const struct address_space_operations + aops __attribute__ ((unused)) = { + .migratepage = migrate_page, + }; + ],[]) +]) + +AC_DEFUN([ZFS_AC_KERNEL_VFS_MIGRATEPAGE], [ + dnl # + dnl # Linux 6.0 gets rid of address_space_operations.migratepage + dnl # + AC_MSG_CHECKING([whether migratepage exists]) + ZFS_LINUX_TEST_RESULT([vfs_has_migratepage], [ + AC_MSG_RESULT([yes]) + AC_DEFINE(HAVE_VFS_MIGRATEPAGE, 1, [migratepage exists]) + ],[ + AC_MSG_RESULT([no]) + ]) +]) diff --git a/config/kernel.m4 b/config/kernel.m4 index b8329a7b6738..6ba0aeacd76d 100644 --- a/config/kernel.m4 +++ b/config/kernel.m4 @@ -1,1052 +1,1054 @@ dnl # dnl # Default ZFS kernel configuration dnl # AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [ AM_COND_IF([BUILD_LINUX], [ dnl # Setup the kernel build environment. ZFS_AC_KERNEL ZFS_AC_QAT dnl # Sanity checks for module building and CONFIG_* defines ZFS_AC_KERNEL_CONFIG_DEFINED ZFS_AC_MODULE_SYMVERS dnl # Sequential ZFS_LINUX_TRY_COMPILE tests ZFS_AC_KERNEL_FPU_HEADER ZFS_AC_KERNEL_OBJTOOL_HEADER ZFS_AC_KERNEL_MISC_MINOR ZFS_AC_KERNEL_DECLARE_EVENT_CLASS dnl # Parallel ZFS_LINUX_TEST_SRC / ZFS_LINUX_TEST_RESULT tests ZFS_AC_KERNEL_TEST_SRC ZFS_AC_KERNEL_TEST_RESULT AS_IF([test "$LINUX_OBJ" != "$LINUX"], [ KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ" ]) AC_SUBST(KERNEL_MAKE) ]) ]) dnl # dnl # Generate and compile all of the kernel API test cases to determine dnl # which interfaces are available. By invoking the kernel build system dnl # only once the compilation can be done in parallel significantly dnl # speeding up the process. dnl # AC_DEFUN([ZFS_AC_KERNEL_TEST_SRC], [ ZFS_AC_KERNEL_SRC_TYPES ZFS_AC_KERNEL_SRC_OBJTOOL ZFS_AC_KERNEL_SRC_ACCESS_OK_TYPE ZFS_AC_KERNEL_SRC_PDE_DATA ZFS_AC_KERNEL_SRC_GENERIC_FADVISE ZFS_AC_KERNEL_SRC_SCHED ZFS_AC_KERNEL_SRC_USLEEP_RANGE ZFS_AC_KERNEL_SRC_VMALLOC_PAGE_KERNEL ZFS_AC_KERNEL_SRC_INODE_TIMES ZFS_AC_KERNEL_SRC_PROC_OPERATIONS ZFS_AC_KERNEL_SRC_BLOCK_DEVICE_OPERATIONS ZFS_AC_KERNEL_SRC_BIO ZFS_AC_KERNEL_SRC_BLKDEV ZFS_AC_KERNEL_SRC_BLK_QUEUE ZFS_AC_KERNEL_SRC_GENHD_FLAGS ZFS_AC_KERNEL_SRC_REVALIDATE_DISK ZFS_AC_KERNEL_SRC_GET_DISK_RO ZFS_AC_KERNEL_SRC_DISCARD_GRANULARITY ZFS_AC_KERNEL_SRC_INODE_OWNER_OR_CAPABLE ZFS_AC_KERNEL_SRC_XATTR ZFS_AC_KERNEL_SRC_ACL ZFS_AC_KERNEL_SRC_INODE_SETATTR ZFS_AC_KERNEL_SRC_INODE_GETATTR ZFS_AC_KERNEL_SRC_SHOW_OPTIONS ZFS_AC_KERNEL_SRC_SHRINKER ZFS_AC_KERNEL_SRC_MKDIR ZFS_AC_KERNEL_SRC_LOOKUP_FLAGS ZFS_AC_KERNEL_SRC_CREATE ZFS_AC_KERNEL_SRC_PERMISSION ZFS_AC_KERNEL_SRC_TMPFILE ZFS_AC_KERNEL_SRC_AUTOMOUNT ZFS_AC_KERNEL_SRC_COMMIT_METADATA ZFS_AC_KERNEL_SRC_SETATTR_PREPARE ZFS_AC_KERNEL_SRC_INSERT_INODE_LOCKED ZFS_AC_KERNEL_SRC_TRUNCATE_SETSIZE ZFS_AC_KERNEL_SRC_SECURITY_INODE ZFS_AC_KERNEL_SRC_FST_MOUNT ZFS_AC_KERNEL_SRC_SB_DYING ZFS_AC_KERNEL_SRC_SET_NLINK ZFS_AC_KERNEL_SRC_SGET ZFS_AC_KERNEL_SRC_VFS_FILEMAP_DIRTY_FOLIO ZFS_AC_KERNEL_SRC_VFS_READ_FOLIO ZFS_AC_KERNEL_SRC_VFS_MIGRATE_FOLIO + ZFS_AC_KERNEL_SRC_VFS_MIGRATEPAGE ZFS_AC_KERNEL_SRC_VFS_FSYNC_2ARGS ZFS_AC_KERNEL_SRC_VFS_READPAGES ZFS_AC_KERNEL_SRC_VFS_SET_PAGE_DIRTY_NOBUFFERS ZFS_AC_KERNEL_SRC_VFS_IOV_ITER ZFS_AC_KERNEL_SRC_VFS_GENERIC_COPY_FILE_RANGE ZFS_AC_KERNEL_SRC_VFS_SPLICE_COPY_FILE_RANGE ZFS_AC_KERNEL_SRC_VFS_REMAP_FILE_RANGE ZFS_AC_KERNEL_SRC_VFS_CLONE_FILE_RANGE ZFS_AC_KERNEL_SRC_VFS_DEDUPE_FILE_RANGE ZFS_AC_KERNEL_SRC_KMAP_ATOMIC_ARGS ZFS_AC_KERNEL_SRC_KMAP_LOCAL_PAGE ZFS_AC_KERNEL_SRC_FOLLOW_DOWN_ONE ZFS_AC_KERNEL_SRC_MAKE_REQUEST_FN ZFS_AC_KERNEL_SRC_GENERIC_IO_ACCT ZFS_AC_KERNEL_SRC_FPU ZFS_AC_KERNEL_SRC_FMODE_T ZFS_AC_KERNEL_SRC_KUIDGID_T ZFS_AC_KERNEL_SRC_KUID_HELPERS ZFS_AC_KERNEL_SRC_RENAME ZFS_AC_KERNEL_SRC_TOTALRAM_PAGES_FUNC ZFS_AC_KERNEL_SRC_TOTALHIGH_PAGES ZFS_AC_KERNEL_SRC_PERCPU ZFS_AC_KERNEL_SRC_GENERIC_FILLATTR ZFS_AC_KERNEL_SRC_MKNOD ZFS_AC_KERNEL_SRC_SYMLINK ZFS_AC_KERNEL_SRC_BIO_MAX_SEGS ZFS_AC_KERNEL_SRC_SIGINFO ZFS_AC_KERNEL_SRC_SYSFS ZFS_AC_KERNEL_SRC_STANDALONE_LINUX_STDARG ZFS_AC_KERNEL_SRC_STRLCPY ZFS_AC_KERNEL_SRC_PAGEMAP_FOLIO_WAIT_BIT ZFS_AC_KERNEL_SRC_ADD_DISK ZFS_AC_KERNEL_SRC_KTHREAD ZFS_AC_KERNEL_SRC_ZERO_PAGE ZFS_AC_KERNEL_SRC___COPY_FROM_USER_INATOMIC ZFS_AC_KERNEL_SRC_IDMAP_MNT_API ZFS_AC_KERNEL_SRC_IDMAP_NO_USERNS ZFS_AC_KERNEL_SRC_IATTR_VFSID ZFS_AC_KERNEL_SRC_WRITEPAGE_T ZFS_AC_KERNEL_SRC_RECLAIMED ZFS_AC_KERNEL_SRC_REGISTER_SYSCTL_TABLE ZFS_AC_KERNEL_SRC_REGISTER_SYSCTL_SZ ZFS_AC_KERNEL_SRC_PROC_HANDLER_CTL_TABLE_CONST ZFS_AC_KERNEL_SRC_COPY_SPLICE_READ ZFS_AC_KERNEL_SRC_SYNC_BDEV ZFS_AC_KERNEL_SRC_MM_PAGE_FLAGS ZFS_AC_KERNEL_SRC_MM_PAGE_SIZE ZFS_AC_KERNEL_SRC_MM_PAGE_MAPPING ZFS_AC_KERNEL_SRC_FILE ZFS_AC_KERNEL_SRC_PIN_USER_PAGES case "$host_cpu" in powerpc*) ZFS_AC_KERNEL_SRC_CPU_HAS_FEATURE ZFS_AC_KERNEL_SRC_FLUSH_DCACHE_PAGE ;; riscv*) ZFS_AC_KERNEL_SRC_FLUSH_DCACHE_PAGE ;; esac AC_MSG_CHECKING([for available kernel interfaces]) ZFS_LINUX_TEST_COMPILE_ALL([kabi]) AC_MSG_RESULT([done]) ]) dnl # dnl # Check results of kernel interface tests. dnl # AC_DEFUN([ZFS_AC_KERNEL_TEST_RESULT], [ ZFS_AC_KERNEL_TYPES ZFS_AC_KERNEL_ACCESS_OK_TYPE ZFS_AC_KERNEL_OBJTOOL ZFS_AC_KERNEL_PDE_DATA ZFS_AC_KERNEL_GENERIC_FADVISE ZFS_AC_KERNEL_SCHED ZFS_AC_KERNEL_USLEEP_RANGE ZFS_AC_KERNEL_VMALLOC_PAGE_KERNEL ZFS_AC_KERNEL_INODE_TIMES ZFS_AC_KERNEL_PROC_OPERATIONS ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS ZFS_AC_KERNEL_BIO ZFS_AC_KERNEL_BLKDEV ZFS_AC_KERNEL_BLK_QUEUE ZFS_AC_KERNEL_GENHD_FLAGS ZFS_AC_KERNEL_REVALIDATE_DISK ZFS_AC_KERNEL_GET_DISK_RO ZFS_AC_KERNEL_DISCARD_GRANULARITY ZFS_AC_KERNEL_INODE_OWNER_OR_CAPABLE ZFS_AC_KERNEL_XATTR ZFS_AC_KERNEL_ACL ZFS_AC_KERNEL_INODE_SETATTR ZFS_AC_KERNEL_INODE_GETATTR ZFS_AC_KERNEL_SHOW_OPTIONS ZFS_AC_KERNEL_SHRINKER ZFS_AC_KERNEL_MKDIR ZFS_AC_KERNEL_LOOKUP_FLAGS ZFS_AC_KERNEL_CREATE ZFS_AC_KERNEL_PERMISSION ZFS_AC_KERNEL_TMPFILE ZFS_AC_KERNEL_AUTOMOUNT ZFS_AC_KERNEL_COMMIT_METADATA ZFS_AC_KERNEL_SETATTR_PREPARE ZFS_AC_KERNEL_INSERT_INODE_LOCKED ZFS_AC_KERNEL_TRUNCATE_SETSIZE ZFS_AC_KERNEL_SECURITY_INODE ZFS_AC_KERNEL_FST_MOUNT ZFS_AC_KERNEL_SB_DYING ZFS_AC_KERNEL_SET_NLINK ZFS_AC_KERNEL_SGET ZFS_AC_KERNEL_VFS_FILEMAP_DIRTY_FOLIO ZFS_AC_KERNEL_VFS_READ_FOLIO ZFS_AC_KERNEL_VFS_MIGRATE_FOLIO + ZFS_AC_KERNEL_VFS_MIGRATEPAGE ZFS_AC_KERNEL_VFS_FSYNC_2ARGS ZFS_AC_KERNEL_VFS_READPAGES ZFS_AC_KERNEL_VFS_SET_PAGE_DIRTY_NOBUFFERS ZFS_AC_KERNEL_VFS_IOV_ITER ZFS_AC_KERNEL_VFS_GENERIC_COPY_FILE_RANGE ZFS_AC_KERNEL_VFS_SPLICE_COPY_FILE_RANGE ZFS_AC_KERNEL_VFS_REMAP_FILE_RANGE ZFS_AC_KERNEL_VFS_CLONE_FILE_RANGE ZFS_AC_KERNEL_VFS_DEDUPE_FILE_RANGE ZFS_AC_KERNEL_KMAP_ATOMIC_ARGS ZFS_AC_KERNEL_KMAP_LOCAL_PAGE ZFS_AC_KERNEL_FOLLOW_DOWN_ONE ZFS_AC_KERNEL_MAKE_REQUEST_FN ZFS_AC_KERNEL_GENERIC_IO_ACCT ZFS_AC_KERNEL_FPU ZFS_AC_KERNEL_FMODE_T ZFS_AC_KERNEL_KUIDGID_T ZFS_AC_KERNEL_KUID_HELPERS ZFS_AC_KERNEL_RENAME ZFS_AC_KERNEL_TOTALRAM_PAGES_FUNC ZFS_AC_KERNEL_TOTALHIGH_PAGES ZFS_AC_KERNEL_PERCPU ZFS_AC_KERNEL_GENERIC_FILLATTR ZFS_AC_KERNEL_MKNOD ZFS_AC_KERNEL_SYMLINK ZFS_AC_KERNEL_BIO_MAX_SEGS ZFS_AC_KERNEL_SIGINFO ZFS_AC_KERNEL_SYSFS ZFS_AC_KERNEL_STANDALONE_LINUX_STDARG ZFS_AC_KERNEL_STRLCPY ZFS_AC_KERNEL_PAGEMAP_FOLIO_WAIT_BIT ZFS_AC_KERNEL_ADD_DISK ZFS_AC_KERNEL_KTHREAD ZFS_AC_KERNEL_ZERO_PAGE ZFS_AC_KERNEL___COPY_FROM_USER_INATOMIC ZFS_AC_KERNEL_IDMAP_MNT_API ZFS_AC_KERNEL_IDMAP_NO_USERNS ZFS_AC_KERNEL_IATTR_VFSID ZFS_AC_KERNEL_WRITEPAGE_T ZFS_AC_KERNEL_RECLAIMED ZFS_AC_KERNEL_REGISTER_SYSCTL_TABLE ZFS_AC_KERNEL_REGISTER_SYSCTL_SZ ZFS_AC_KERNEL_PROC_HANDLER_CTL_TABLE_CONST ZFS_AC_KERNEL_COPY_SPLICE_READ ZFS_AC_KERNEL_SYNC_BDEV ZFS_AC_KERNEL_MM_PAGE_FLAGS ZFS_AC_KERNEL_MM_PAGE_SIZE ZFS_AC_KERNEL_MM_PAGE_MAPPING ZFS_AC_KERNEL_1ARG_ASSIGN_STR ZFS_AC_KERNEL_FILE ZFS_AC_KERNEL_PIN_USER_PAGES case "$host_cpu" in powerpc*) ZFS_AC_KERNEL_CPU_HAS_FEATURE ZFS_AC_KERNEL_FLUSH_DCACHE_PAGE ;; riscv*) ZFS_AC_KERNEL_FLUSH_DCACHE_PAGE ;; esac ]) dnl # dnl # Detect name used for Module.symvers file in kernel dnl # AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [ modpost=$LINUX/scripts/Makefile.modpost AC_MSG_CHECKING([kernel file name for module symbols]) AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [ AS_IF([grep -q Modules.symvers $modpost], [ LINUX_SYMBOLS=Modules.symvers ], [ LINUX_SYMBOLS=Module.symvers ]) AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [ AC_MSG_ERROR([ *** Please make sure the kernel devel package for your distribution *** is installed. If you are building with a custom kernel, make sure *** the kernel is configured, built, and the '--with-linux=PATH' *** configure option refers to the location of the kernel source. ]) ]) ], [ LINUX_SYMBOLS=NONE ]) AC_MSG_RESULT($LINUX_SYMBOLS) AC_SUBST(LINUX_SYMBOLS) ]) dnl # dnl # Detect the kernel to be built against dnl # dnl # Most modern Linux distributions have separate locations for bare dnl # source (source) and prebuilt (build) files. Additionally, there are dnl # `source` and `build` symlinks in `/lib/modules/$(KERNEL_VERSION)` dnl # pointing to them. The directory search order is now: dnl # dnl # - `configure` command line values if both `--with-linux` and dnl # `--with-linux-obj` were defined dnl # dnl # - If only `--with-linux` was defined, `--with-linux-obj` is assumed dnl # to have the same value as `--with-linux` dnl # dnl # - If neither `--with-linux` nor `--with-linux-obj` were defined dnl # autodetection is used: dnl # dnl # - `/lib/modules/$(uname -r)/{source,build}` respectively, if exist. dnl # dnl # - If only `/lib/modules/$(uname -r)/build` exists, it is assumed dnl # to be both source and build directory. dnl # dnl # - The first directory in `/lib/modules` with the highest version dnl # number according to `sort -V` which contains both `source` and dnl # `build` symlinks/directories. If module directory contains only dnl # `build` component, it is assumed to be both source and build dnl # directory. dnl # dnl # - Last resort: the first directory matching `/usr/src/kernels/*` dnl # and `/usr/src/linux-*` with the highest version number according dnl # to `sort -V` is assumed to be both source and build directory. dnl # AC_DEFUN([ZFS_AC_KERNEL], [ AC_ARG_WITH([linux], AS_HELP_STRING([--with-linux=PATH], [Path to kernel source]), [kernelsrc="$withval"]) AC_ARG_WITH(linux-obj, AS_HELP_STRING([--with-linux-obj=PATH], [Path to kernel build objects]), [kernelbuild="$withval"]) AC_MSG_CHECKING([kernel source and build directories]) AS_IF([test -n "$kernelsrc" && test -z "$kernelbuild"], [ kernelbuild="$kernelsrc" ], [test -z "$kernelsrc"], [ AS_IF([test -e "/lib/modules/$(uname -r)/source" && \ test -e "/lib/modules/$(uname -r)/build"], [ src="/lib/modules/$(uname -r)/source" build="/lib/modules/$(uname -r)/build" ], [test -e "/lib/modules/$(uname -r)/build"], [ build="/lib/modules/$(uname -r)/build" src="$build" ], [ src= for d in $(ls -1d /lib/modules/* 2>/dev/null | sort -Vr); do if test -e "$d/source" && test -e "$d/build"; then src="$d/source" build="$d/build" break fi if test -e "$d/build"; then src="$d/build" build="$d/build" break fi done # the least reliable method if test -z "$src"; then src=$(ls -1d /usr/src/kernels/* /usr/src/linux-* \ 2>/dev/null | grep -v obj | sort -Vr | head -1) build="$src" fi ]) AS_IF([test -n "$src" && test -e "$src"], [ kernelsrc=$(readlink -e "$src") ], [ kernelsrc="[Not found]" ]) AS_IF([test -n "$build" && test -e "$build"], [ kernelbuild=$(readlink -e "$build") ], [ kernelbuild="[Not found]" ]) ], [ AS_IF([test "$kernelsrc" = "NONE"], [ kernsrcver=NONE ]) withlinux=yes ]) AC_MSG_RESULT([done]) AC_MSG_CHECKING([kernel source directory]) AC_MSG_RESULT([$kernelsrc]) AC_MSG_CHECKING([kernel build directory]) AC_MSG_RESULT([$kernelbuild]) AS_IF([test ! -d "$kernelsrc" || test ! -d "$kernelbuild"], [ AC_MSG_ERROR([ *** Please make sure the kernel devel package for your distribution *** is installed and then try again. If that fails, you can specify the *** location of the kernel source and build with the '--with-linux=PATH' and *** '--with-linux-obj=PATH' options respectively.]) ]) AC_MSG_CHECKING([kernel source version]) utsrelease1=$kernelbuild/include/linux/version.h utsrelease2=$kernelbuild/include/linux/utsrelease.h utsrelease3=$kernelbuild/include/generated/utsrelease.h AS_IF([test -r $utsrelease1 && grep -qF UTS_RELEASE $utsrelease1], [ utsrelease=$utsrelease1 ], [test -r $utsrelease2 && grep -qF UTS_RELEASE $utsrelease2], [ utsrelease=$utsrelease2 ], [test -r $utsrelease3 && grep -qF UTS_RELEASE $utsrelease3], [ utsrelease=$utsrelease3 ]) AS_IF([test -n "$utsrelease"], [ kernsrcver=$($AWK '/UTS_RELEASE/ { gsub(/"/, "", $[3]); print $[3] }' $utsrelease) AS_IF([test -z "$kernsrcver"], [ AC_MSG_RESULT([Not found]) AC_MSG_ERROR([ *** Cannot determine kernel version. ]) ]) ], [ AC_MSG_RESULT([Not found]) if test "x$enable_linux_builtin" != xyes; then AC_MSG_ERROR([ *** Cannot find UTS_RELEASE definition. ]) else AC_MSG_ERROR([ *** Cannot find UTS_RELEASE definition. *** Please run 'make prepare' inside the kernel source tree.]) fi ]) AC_MSG_RESULT([$kernsrcver]) AX_COMPARE_VERSION([$kernsrcver], [ge], [$ZFS_META_KVER_MIN], [], [ AC_MSG_ERROR([ *** Cannot build against kernel version $kernsrcver. *** The minimum supported kernel version is $ZFS_META_KVER_MIN. ]) ]) AC_ARG_ENABLE([linux-experimental], AS_HELP_STRING([--enable-linux-experimental], [Allow building against some unsupported kernel versions])) AX_COMPARE_VERSION([$kernsrcver], [ge], [$ZFS_META_KVER_MAX], [ AX_COMPARE_VERSION([$kernsrcver], [eq2], [$ZFS_META_KVER_MAX], [ kern_max_version_ok=yes ], [ kern_max_version_ok=no ]) ], [ kern_max_version_ok=yes ]) AS_IF([test "x$kern_max_version_ok" != "xyes"], [ AS_IF([test "x$enable_linux_experimental" == "xyes"], [ AC_DEFINE(HAVE_LINUX_EXPERIMENTAL, 1, [building against unsupported kernel version]) ], [ AC_MSG_ERROR([ *** Cannot build against kernel version $kernsrcver. *** The maximum supported kernel version is $ZFS_META_KVER_MAX. ]) ]) ]) LINUX=${kernelsrc} LINUX_OBJ=${kernelbuild} LINUX_VERSION=${kernsrcver} AC_SUBST(LINUX) AC_SUBST(LINUX_OBJ) AC_SUBST(LINUX_VERSION) dnl # create a relatively unique numeric checksum based on the kernel dnl # version and path. this is included in the cache key below, dnl # allowing different cached values for different kernels _zfs_linux_cache_checksum=$(echo ${kernelsrc} {$kernelbuild} ${kernsrcver} | cksum | cut -f1 -d' ') ]) AC_DEFUN([ZFS_AC_KERNEL_VERSION_WARNING], [ AS_IF([test "x$enable_linux_experimental" = "xyes" && \ test "x$kern_max_version_ok" != "xyes"], [ AC_MSG_WARN([ You are building OpenZFS against Linux version $kernsrcver. This combination is considered EXPERIMENTAL by the OpenZFS project. Even if it appears to build and run correctly, there may be bugs that can cause SERIOUS DATA LOSS. YOU HAVE BEEN WARNED! If you choose to continue, we'd appreciate if you could report your results on the OpenZFS issue tracker at: https://github.com/openzfs/zfs/issues/new Your feedback will help us prepare a new OpenZFS release that supports this version of Linux. ]) ]) ]) dnl # dnl # Detect the QAT module to be built against, QAT provides hardware dnl # acceleration for data compression: dnl # dnl # https://01.org/intel-quickassist-technology dnl # dnl # 1) Download and install QAT driver from the above link dnl # 2) Start QAT driver in your system: dnl # service qat_service start dnl # 3) Enable QAT in ZFS, e.g.: dnl # ./configure --with-qat=/QAT1.6 dnl # make dnl # 4) Set GZIP compression in ZFS dataset: dnl # zfs set compression = gzip dnl # dnl # Then the data written to this ZFS pool is compressed by QAT accelerator dnl # automatically, and de-compressed by QAT when read from the pool. dnl # dnl # 1) Get QAT hardware statistics with: dnl # cat /proc/icp_dh895xcc_dev/qat dnl # 2) To disable QAT: dnl # insmod zfs.ko zfs_qat_disable=1 dnl # AC_DEFUN([ZFS_AC_QAT], [ AC_ARG_WITH([qat], AS_HELP_STRING([--with-qat=PATH], [Path to qat source]), AS_IF([test "$withval" = "yes"], AC_MSG_ERROR([--with-qat=PATH requires a PATH]), [qatsrc="$withval"])) AC_ARG_WITH([qat-obj], AS_HELP_STRING([--with-qat-obj=PATH], [Path to qat build objects]), [qatbuild="$withval"]) AS_IF([test ! -z "${qatsrc}"], [ AC_MSG_CHECKING([qat source directory]) AC_MSG_RESULT([$qatsrc]) QAT_SRC="${qatsrc}/quickassist" AS_IF([ test ! -e "$QAT_SRC/include/cpa.h"], [ AC_MSG_ERROR([ *** Please make sure the qat driver package is installed *** and specify the location of the qat source with the *** '--with-qat=PATH' option then try again. Failed to *** find cpa.h in: ${QAT_SRC}/include]) ]) ]) AS_IF([test ! -z "${qatsrc}"], [ AC_MSG_CHECKING([qat build directory]) AS_IF([test -z "$qatbuild"], [ qatbuild="${qatsrc}/build" ]) AC_MSG_RESULT([$qatbuild]) QAT_OBJ=${qatbuild} AS_IF([ ! test -e "$QAT_OBJ/icp_qa_al.ko" && ! test -e "$QAT_OBJ/qat_api.ko"], [ AC_MSG_ERROR([ *** Please make sure the qat driver is installed then try again. *** Failed to find icp_qa_al.ko or qat_api.ko in: $QAT_OBJ]) ]) AC_SUBST(QAT_SRC) AC_SUBST(QAT_OBJ) AC_DEFINE(HAVE_QAT, 1, [qat is enabled and existed]) ]) dnl # dnl # Detect the name used for the QAT Module.symvers file. dnl # AS_IF([test ! -z "${qatsrc}"], [ AC_MSG_CHECKING([qat file for module symbols]) QAT_SYMBOLS=$QAT_SRC/lookaside/access_layer/src/Module.symvers AS_IF([test -r $QAT_SYMBOLS], [ AC_MSG_RESULT([$QAT_SYMBOLS]) AC_SUBST(QAT_SYMBOLS) ],[ AC_MSG_ERROR([ *** Please make sure the qat driver is installed then try again. *** Failed to find Module.symvers in: $QAT_SYMBOLS ]) ]) ]) ]) dnl # dnl # ZFS_LINUX_CONFTEST_H dnl # AC_DEFUN([ZFS_LINUX_CONFTEST_H], [ test -d build/$2 || mkdir -p build/$2 cat - <<_ACEOF >build/$2/$2.h $1 _ACEOF ]) dnl # dnl # ZFS_LINUX_CONFTEST_C dnl # AC_DEFUN([ZFS_LINUX_CONFTEST_C], [ test -d build/$2 || mkdir -p build/$2 cat confdefs.h - <<_ACEOF >build/$2/$2.c $1 _ACEOF ]) dnl # dnl # ZFS_LINUX_CONFTEST_MAKEFILE dnl # dnl # $1 - test case name dnl # $2 - add to top-level Makefile dnl # $3 - additional build flags dnl # AC_DEFUN([ZFS_LINUX_CONFTEST_MAKEFILE], [ test -d build || mkdir -p build test -d build/$1 || mkdir -p build/$1 file=build/$1/Makefile dnl # Example command line to manually build source. cat - <<_ACEOF >$file # Example command line to manually build source # make modules -C $LINUX_OBJ $ARCH_UM M=$PWD/build/$1 ccflags-y := -Werror $FRAME_LARGER_THAN _ACEOF dnl # Additional custom CFLAGS as requested. m4_ifval($3, [echo "ccflags-y += $3" >>$file], []) dnl # Test case source echo "obj-m := $1.o" >>$file AS_IF([test "x$2" = "xyes"], [echo "obj-m += $1/" >>build/Makefile], []) ]) dnl # dnl # ZFS_LINUX_TEST_PROGRAM(C)([PROLOGUE], [BODY]) dnl # m4_define([ZFS_LINUX_TEST_PROGRAM], [ #include $1 int main (void) { $2 ; return 0; } MODULE_DESCRIPTION("conftest"); MODULE_AUTHOR(ZFS_META_AUTHOR); MODULE_VERSION(ZFS_META_VERSION "-" ZFS_META_RELEASE); MODULE_LICENSE($3); ]) dnl # dnl # ZFS_LINUX_TEST_REMOVE dnl # dnl # Removes the specified test source and results. dnl # AC_DEFUN([ZFS_LINUX_TEST_REMOVE], [ test -d build/$1 && rm -Rf build/$1 test -f build/Makefile && sed '/$1/d' build/Makefile ]) dnl # dnl # ZFS_LINUX_COMPILE dnl # dnl # $1 - build dir dnl # $2 - test command dnl # $3 - pass command dnl # $4 - fail command dnl # $5 - set KBUILD_MODPOST_NOFINAL='yes' dnl # $6 - set KBUILD_MODPOST_WARN='yes' dnl # dnl # Used internally by ZFS_LINUX_TEST_{COMPILE,MODPOST} dnl # AC_DEFUN([ZFS_LINUX_COMPILE], [ AC_ARG_VAR([KERNEL_CC], [C compiler for building kernel modules]) AC_ARG_VAR([KERNEL_LD], [Linker for building kernel modules]) AC_ARG_VAR([KERNEL_LLVM], [Binary option to build kernel modules with LLVM/CLANG toolchain]) AC_ARG_VAR([KERNEL_CROSS_COMPILE], [Cross compile prefix for kernel module builds]) AC_ARG_VAR([KERNEL_ARCH], [Architecture to build kernel modules for]) AC_TRY_COMMAND([ KBUILD_MODPOST_NOFINAL="$5" KBUILD_MODPOST_WARN="$6" make modules -k -j$TEST_JOBS ${KERNEL_CC:+CC=$KERNEL_CC} ${KERNEL_LD:+LD=$KERNEL_LD} ${KERNEL_LLVM:+LLVM=$KERNEL_LLVM} CONFIG_MODULES=y CFLAGS_MODULE=-DCONFIG_MODULES ${KERNEL_CROSS_COMPILE:+CROSS_COMPILE=$KERNEL_CROSS_COMPILE} ${KERNEL_ARCH:+ARCH=$KERNEL_ARCH} -C $LINUX_OBJ $ARCH_UM M=$PWD/$1 >$1/build.log 2>&1]) AS_IF([AC_TRY_COMMAND([$2])], [$3], [$4]) ]) dnl # dnl # ZFS_LINUX_TEST_COMPILE dnl # dnl # Perform a full compile excluding the final modpost phase. dnl # AC_DEFUN([ZFS_LINUX_TEST_COMPILE], [ ZFS_LINUX_COMPILE([$2], [test -f $2/build.log], [ mv $2/Makefile $2/Makefile.compile.$1 mv $2/build.log $2/build.log.$1 ],[ AC_MSG_ERROR([ *** Unable to compile test source to determine kernel interfaces.]) ], [yes], []) ]) dnl # dnl # ZFS_LINUX_TEST_MODPOST dnl # dnl # Perform a full compile including the modpost phase. This may dnl # be an incremental build if the objects have already been built. dnl # AC_DEFUN([ZFS_LINUX_TEST_MODPOST], [ ZFS_LINUX_COMPILE([$2], [test -f $2/build.log], [ mv $2/Makefile $2/Makefile.modpost.$1 cat $2/build.log >>build/build.log.$1 ],[ AC_MSG_ERROR([ *** Unable to modpost test source to determine kernel interfaces.]) ], [], [yes]) ]) dnl # dnl # Perform the compilation of the test cases in two phases. dnl # dnl # Phase 1) attempt to build the object files for all of the tests dnl # defined by the ZFS_LINUX_TEST_SRC macro. But do not dnl # perform the final modpost stage. dnl # dnl # Phase 2) disable all tests which failed the initial compilation, dnl # then invoke the final modpost step for the remaining tests. dnl # dnl # This allows us efficiently build the test cases in parallel while dnl # remaining resilient to build failures which are expected when dnl # detecting the available kernel interfaces. dnl # dnl # The maximum allowed parallelism can be controlled by setting the dnl # TEST_JOBS environment variable. Otherwise, it default to $(nproc). dnl # AC_DEFUN([ZFS_LINUX_TEST_COMPILE_ALL], [ dnl # Phase 1 - Compilation only, final linking is skipped. ZFS_LINUX_TEST_COMPILE([$1], [build]) dnl # dnl # Phase 2 - When building external modules disable test cases dnl # which failed to compile and invoke modpost to verify the dnl # final linking. dnl # dnl # Test names suffixed with '_license' call modpost independently dnl # to ensure that a single incompatibility does not result in the dnl # modpost phase exiting early. This check is not performed on dnl # every symbol since the majority are compatible and doing so dnl # would significantly slow down this phase. dnl # dnl # When configuring for builtin (--enable-linux-builtin) dnl # fake the linking step artificially create the expected .ko dnl # files for tests which did compile. This is required for dnl # kernels which do not have loadable module support or have dnl # not yet been built. dnl # AS_IF([test "x$enable_linux_builtin" = "xno"], [ for dir in $(awk '/^obj-m/ { print [$]3 }' \ build/Makefile.compile.$1); do name=${dir%/} AS_IF([test -f build/$name/$name.o], [ AS_IF([test "${name##*_}" = "license"], [ ZFS_LINUX_TEST_MODPOST([$1], [build/$name]) echo "obj-n += $dir" >>build/Makefile ], [ echo "obj-m += $dir" >>build/Makefile ]) ], [ echo "obj-n += $dir" >>build/Makefile ]) done ZFS_LINUX_TEST_MODPOST([$1], [build]) ], [ for dir in $(awk '/^obj-m/ { print [$]3 }' \ build/Makefile.compile.$1); do name=${dir%/} AS_IF([test -f build/$name/$name.o], [ touch build/$name/$name.ko ]) done ]) ]) dnl # dnl # ZFS_LINUX_TEST_SRC dnl # dnl # $1 - name dnl # $2 - global dnl # $3 - source dnl # $4 - extra cflags dnl # $5 - check license-compatibility dnl # dnl # Check if the test source is buildable at all and then if it is dnl # license compatible. dnl # dnl # N.B because all of the test cases are compiled in parallel they dnl # must never depend on the results of previous tests. Each test dnl # needs to be entirely independent. dnl # AC_DEFUN([ZFS_LINUX_TEST_SRC], [ cachevar="zfs_cv_kernel_[$1]_$_zfs_linux_cache_checksum" eval "cacheval=\$$cachevar" AS_IF([test "x$cacheval" = "x"], [ ZFS_LINUX_CONFTEST_C([ZFS_LINUX_TEST_PROGRAM([[$2]], [[$3]], [["Dual BSD/GPL"]])], [$1]) ZFS_LINUX_CONFTEST_MAKEFILE([$1], [yes], [$4]) AS_IF([ test -n "$5" ], [ ZFS_LINUX_CONFTEST_C([ZFS_LINUX_TEST_PROGRAM( [[$2]], [[$3]], [[$5]])], [$1_license]) ZFS_LINUX_CONFTEST_MAKEFILE([$1_license], [yes], [$4]) ]) ]) ]) dnl # dnl # ZFS_LINUX_TEST_RESULT dnl # dnl # $1 - name of a test source (ZFS_LINUX_TEST_SRC) dnl # $2 - run on success (valid .ko generated) dnl # $3 - run on failure (unable to compile) dnl # AC_DEFUN([ZFS_LINUX_TEST_RESULT], [ cachevar="zfs_cv_kernel_[$1]_$_zfs_linux_cache_checksum" AC_CACHE_VAL([$cachevar], [ AS_IF([test -d build/$1], [ AS_IF([test -f build/$1/$1.ko], [ eval "$cachevar=yes" ], [ eval "$cachevar=no" ]) ], [ AC_MSG_ERROR([ *** No matching source for the "$1" test, check that *** both the test source and result macros refer to the same name. ]) ]) ]) eval "cacheval=\$$cachevar" AS_IF([test "x$cacheval" = "xyes"], [$2], [$3]) ]) dnl # dnl # ZFS_LINUX_TEST_ERROR dnl # dnl # Generic error message which can be used when none of the expected dnl # kernel interfaces were detected. dnl # AC_DEFUN([ZFS_LINUX_TEST_ERROR], [ AC_MSG_ERROR([ *** None of the expected "$1" interfaces were detected. *** This may be because your kernel version is newer than what is *** supported, or you are using a patched custom kernel with *** incompatible modifications. *** *** ZFS Version: $ZFS_META_ALIAS *** Compatible Kernels: $ZFS_META_KVER_MIN - $ZFS_META_KVER_MAX ]) ]) dnl # dnl # ZFS_LINUX_TEST_RESULT_SYMBOL dnl # dnl # Like ZFS_LINUX_TEST_RESULT except ZFS_CHECK_SYMBOL_EXPORT is called to dnl # verify symbol exports, unless --enable-linux-builtin was provided to dnl # configure. dnl # AC_DEFUN([ZFS_LINUX_TEST_RESULT_SYMBOL], [ cachevar="zfs_cv_kernel_[$1]_$_zfs_linux_cache_checksum" AC_CACHE_VAL([$cachevar], [ AS_IF([ ! test -f build/$1/$1.ko], [ eval "$cachevar=no" ], [ AS_IF([test "x$enable_linux_builtin" != "xyes"], [ ZFS_CHECK_SYMBOL_EXPORT([$2], [$3], [ eval "$cachevar=yes" ], [ eval "$cachevar=no" ]) ], [ eval "$cacheval=yes" ]) ]) ]) eval "cacheval=\$$cachevar" AS_IF([test "x$cacheval" = "xyes"], [$4], [$5]) ]) dnl # dnl # ZFS_LINUX_COMPILE_IFELSE dnl # AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [ ZFS_LINUX_TEST_REMOVE([conftest]) m4_ifvaln([$1], [ZFS_LINUX_CONFTEST_C([$1], [conftest])]) m4_ifvaln([$5], [ZFS_LINUX_CONFTEST_H([$5], [conftest])], [ZFS_LINUX_CONFTEST_H([], [conftest])]) ZFS_LINUX_CONFTEST_MAKEFILE([conftest], [no], [m4_ifvaln([$5], [-I$PWD/build/conftest], [])]) ZFS_LINUX_COMPILE([build/conftest], [$2], [$3], [$4], [], []) ]) dnl # dnl # ZFS_LINUX_TRY_COMPILE dnl # dnl # $1 - global dnl # $2 - source dnl # $3 - run on success (valid .ko generated) dnl # $4 - run on failure (unable to compile) dnl # dnl # When configuring as builtin (--enable-linux-builtin) for kernels dnl # without loadable module support (CONFIG_MODULES=n) only the object dnl # file is created. See ZFS_LINUX_TEST_COMPILE_ALL for details. dnl # AC_DEFUN([ZFS_LINUX_TRY_COMPILE], [ AS_IF([test "x$enable_linux_builtin" = "xyes"], [ ZFS_LINUX_COMPILE_IFELSE( [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]], [[ZFS_META_LICENSE]])], [test -f build/conftest/conftest.o], [$3], [$4]) ], [ ZFS_LINUX_COMPILE_IFELSE( [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]], [[ZFS_META_LICENSE]])], [test -f build/conftest/conftest.ko], [$3], [$4]) ]) ]) dnl # dnl # ZFS_CHECK_SYMBOL_EXPORT dnl # dnl # Check if a symbol is exported on not by consulting the symbols dnl # file, or optionally the source code. dnl # AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [ grep -q -E '[[[:space:]]]$1[[[:space:]]]' \ $LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null rc=$? if test $rc -ne 0; then export=0 for file in $2; do grep -q -E "EXPORT_SYMBOL.*($1)" \ "$LINUX/$file" 2>/dev/null rc=$? if test $rc -eq 0; then export=1 break; fi done if test $export -eq 0; then : $4 else : $3 fi else : $3 fi ]) dnl # dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL dnl # dnl # Like ZFS_LINUX_TRY_COMPILER except ZFS_CHECK_SYMBOL_EXPORT is called dnl # to verify symbol exports, unless --enable-linux-builtin was provided dnl # to configure. dnl # AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [ ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1]) if test $rc -ne 0; then : $6 else if test "x$enable_linux_builtin" != xyes; then ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1]) fi if test $rc -ne 0; then : $6 else : $5 fi fi ]) dnl # dnl # ZFS_LINUX_TRY_COMPILE_HEADER dnl # like ZFS_LINUX_TRY_COMPILE, except the contents conftest.h are dnl # provided via the fifth parameter dnl # AC_DEFUN([ZFS_LINUX_TRY_COMPILE_HEADER], [ AS_IF([test "x$enable_linux_builtin" = "xyes"], [ ZFS_LINUX_COMPILE_IFELSE( [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]], [[ZFS_META_LICENSE]])], [test -f build/conftest/conftest.o], [$3], [$4], [$5]) ], [ ZFS_LINUX_COMPILE_IFELSE( [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]], [[ZFS_META_LICENSE]])], [test -f build/conftest/conftest.ko], [$3], [$4], [$5]) ]) ]) dnl # dnl # AS_VERSION_COMPARE_LE dnl # like AS_VERSION_COMPARE_LE, but runs $3 if (and only if) $1 <= $2 dnl # AS_VERSION_COMPARE_LE (version-1, version-2, [action-if-less-or-equal], [action-if-greater]) dnl # AC_DEFUN([AS_VERSION_COMPARE_LE], [ AS_VERSION_COMPARE([$1], [$2], [$3], [$3], [$4]) ]) dnl # dnl # ZFS_LINUX_REQUIRE_API dnl # like ZFS_LINUX_TEST_ERROR, except only fails if the kernel is dnl # at least some specified version. dnl # AC_DEFUN([ZFS_LINUX_REQUIRE_API], [ AS_VERSION_COMPARE_LE([$2], [$kernsrcver], [ AC_MSG_ERROR([ *** None of the expected "$1" interfaces were detected. This *** interface is expected for kernels version "$2" and above. *** This may be because your kernel version is newer than what is *** supported, or you are using a patched custom kernel with *** incompatible modifications. Newer kernels may have incompatible *** APIs. *** *** ZFS Version: $ZFS_META_ALIAS *** Compatible Kernels: $ZFS_META_KVER_MIN - $ZFS_META_KVER_MAX ]) ], [ AC_MSG_RESULT(no) ]) ]) diff --git a/module/os/linux/zfs/zpl_file.c b/module/os/linux/zfs/zpl_file.c index 787d3cb31410..4d10d130ffb0 100644 --- a/module/os/linux/zfs/zpl_file.c +++ b/module/os/linux/zfs/zpl_file.c @@ -1,1111 +1,1111 @@ // SPDX-License-Identifier: CDDL-1.0 /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2011, Lawrence Livermore National Security, LLC. * Copyright (c) 2015 by Chunwei Chen. All rights reserved. */ #ifdef CONFIG_COMPAT #include #endif #include #include #include #include #include #include #include #include #if defined(HAVE_VFS_SET_PAGE_DIRTY_NOBUFFERS) || \ defined(HAVE_VFS_FILEMAP_DIRTY_FOLIO) #include #endif #include #ifdef HAVE_VFS_FILEMAP_DIRTY_FOLIO #include #endif /* * When using fallocate(2) to preallocate space, inflate the requested * capacity check by 10% to account for the required metadata blocks. */ static unsigned int zfs_fallocate_reserve_percent = 110; static int zpl_open(struct inode *ip, struct file *filp) { cred_t *cr = CRED(); int error; fstrans_cookie_t cookie; error = generic_file_open(ip, filp); if (error) return (error); crhold(cr); cookie = spl_fstrans_mark(); error = -zfs_open(ip, filp->f_mode, filp->f_flags, cr); spl_fstrans_unmark(cookie); crfree(cr); ASSERT3S(error, <=, 0); return (error); } static int zpl_release(struct inode *ip, struct file *filp) { cred_t *cr = CRED(); int error; fstrans_cookie_t cookie; cookie = spl_fstrans_mark(); if (ITOZ(ip)->z_atime_dirty) zfs_mark_inode_dirty(ip); crhold(cr); error = -zfs_close(ip, filp->f_flags, cr); spl_fstrans_unmark(cookie); crfree(cr); ASSERT3S(error, <=, 0); return (error); } static int zpl_iterate(struct file *filp, struct dir_context *ctx) { cred_t *cr = CRED(); int error; fstrans_cookie_t cookie; crhold(cr); cookie = spl_fstrans_mark(); error = -zfs_readdir(file_inode(filp), ctx, cr); spl_fstrans_unmark(cookie); crfree(cr); ASSERT3S(error, <=, 0); return (error); } static int zpl_fsync(struct file *filp, loff_t start, loff_t end, int datasync) { struct inode *inode = filp->f_mapping->host; znode_t *zp = ITOZ(inode); zfsvfs_t *zfsvfs = ITOZSB(inode); cred_t *cr = CRED(); int error; fstrans_cookie_t cookie; /* * The variables z_sync_writes_cnt and z_async_writes_cnt work in * tandem so that sync writes can detect if there are any non-sync * writes going on and vice-versa. The "vice-versa" part to this logic * is located in zfs_putpage() where non-sync writes check if there are * any ongoing sync writes. If any sync and non-sync writes overlap, * we do a commit to complete the non-sync writes since the latter can * potentially take several seconds to complete and thus block sync * writes in the upcoming call to filemap_write_and_wait_range(). */ atomic_inc_32(&zp->z_sync_writes_cnt); /* * If the following check does not detect an overlapping non-sync write * (say because it's just about to start), then it is guaranteed that * the non-sync write will detect this sync write. This is because we * always increment z_sync_writes_cnt / z_async_writes_cnt before doing * the check on z_async_writes_cnt / z_sync_writes_cnt here and in * zfs_putpage() respectively. */ if (atomic_load_32(&zp->z_async_writes_cnt) > 0) { if ((error = zpl_enter(zfsvfs, FTAG)) != 0) { atomic_dec_32(&zp->z_sync_writes_cnt); return (error); } zil_commit(zfsvfs->z_log, zp->z_id); zpl_exit(zfsvfs, FTAG); } error = filemap_write_and_wait_range(inode->i_mapping, start, end); /* * The sync write is not complete yet but we decrement * z_sync_writes_cnt since zfs_fsync() increments and decrements * it internally. If a non-sync write starts just after the decrement * operation but before we call zfs_fsync(), it may not detect this * overlapping sync write but it does not matter since we have already * gone past filemap_write_and_wait_range() and we won't block due to * the non-sync write. */ atomic_dec_32(&zp->z_sync_writes_cnt); if (error) return (error); crhold(cr); cookie = spl_fstrans_mark(); error = -zfs_fsync(zp, datasync, cr); spl_fstrans_unmark(cookie); crfree(cr); ASSERT3S(error, <=, 0); return (error); } static inline int zfs_io_flags(struct kiocb *kiocb) { int flags = 0; #if defined(IOCB_DSYNC) if (kiocb->ki_flags & IOCB_DSYNC) flags |= O_DSYNC; #endif #if defined(IOCB_SYNC) if (kiocb->ki_flags & IOCB_SYNC) flags |= O_SYNC; #endif #if defined(IOCB_APPEND) if (kiocb->ki_flags & IOCB_APPEND) flags |= O_APPEND; #endif #if defined(IOCB_DIRECT) if (kiocb->ki_flags & IOCB_DIRECT) flags |= O_DIRECT; #endif return (flags); } /* * If relatime is enabled, call file_accessed() if zfs_relatime_need_update() * is true. This is needed since datasets with inherited "relatime" property * aren't necessarily mounted with the MNT_RELATIME flag (e.g. after * `zfs set relatime=...`), which is what relatime test in VFS by * relatime_need_update() is based on. */ static inline void zpl_file_accessed(struct file *filp) { struct inode *ip = filp->f_mapping->host; if (!IS_NOATIME(ip) && ITOZSB(ip)->z_relatime) { if (zfs_relatime_need_update(ip)) file_accessed(filp); } else { file_accessed(filp); } } static ssize_t zpl_iter_read(struct kiocb *kiocb, struct iov_iter *to) { cred_t *cr = CRED(); fstrans_cookie_t cookie; struct file *filp = kiocb->ki_filp; ssize_t count = iov_iter_count(to); zfs_uio_t uio; zfs_uio_iov_iter_init(&uio, to, kiocb->ki_pos, count, 0); crhold(cr); cookie = spl_fstrans_mark(); ssize_t ret = -zfs_read(ITOZ(filp->f_mapping->host), &uio, filp->f_flags | zfs_io_flags(kiocb), cr); spl_fstrans_unmark(cookie); crfree(cr); if (ret < 0) return (ret); ssize_t read = count - uio.uio_resid; kiocb->ki_pos += read; zpl_file_accessed(filp); return (read); } static inline ssize_t zpl_generic_write_checks(struct kiocb *kiocb, struct iov_iter *from, size_t *countp) { ssize_t ret = generic_write_checks(kiocb, from); if (ret <= 0) return (ret); *countp = ret; return (0); } static ssize_t zpl_iter_write(struct kiocb *kiocb, struct iov_iter *from) { cred_t *cr = CRED(); fstrans_cookie_t cookie; struct file *filp = kiocb->ki_filp; struct inode *ip = filp->f_mapping->host; zfs_uio_t uio; size_t count = 0; ssize_t ret; ret = zpl_generic_write_checks(kiocb, from, &count); if (ret) return (ret); zfs_uio_iov_iter_init(&uio, from, kiocb->ki_pos, count, from->iov_offset); crhold(cr); cookie = spl_fstrans_mark(); ret = -zfs_write(ITOZ(ip), &uio, filp->f_flags | zfs_io_flags(kiocb), cr); spl_fstrans_unmark(cookie); crfree(cr); if (ret < 0) return (ret); ssize_t wrote = count - uio.uio_resid; kiocb->ki_pos += wrote; return (wrote); } static ssize_t zpl_direct_IO(struct kiocb *kiocb, struct iov_iter *iter) { /* * All O_DIRECT requests should be handled by * zpl_iter_write/read}(). There is no way kernel generic code should * call the direct_IO address_space_operations function. We set this * code path to be fatal if it is executed. */ PANIC(0); return (0); } static loff_t zpl_llseek(struct file *filp, loff_t offset, int whence) { #if defined(SEEK_HOLE) && defined(SEEK_DATA) fstrans_cookie_t cookie; if (whence == SEEK_DATA || whence == SEEK_HOLE) { struct inode *ip = filp->f_mapping->host; loff_t maxbytes = ip->i_sb->s_maxbytes; loff_t error; spl_inode_lock_shared(ip); cookie = spl_fstrans_mark(); error = -zfs_holey(ITOZ(ip), whence, &offset); spl_fstrans_unmark(cookie); if (error == 0) error = lseek_execute(filp, ip, offset, maxbytes); spl_inode_unlock_shared(ip); return (error); } #endif /* SEEK_HOLE && SEEK_DATA */ return (generic_file_llseek(filp, offset, whence)); } /* * It's worth taking a moment to describe how mmap is implemented * for zfs because it differs considerably from other Linux filesystems. * However, this issue is handled the same way under OpenSolaris. * * The issue is that by design zfs bypasses the Linux page cache and * leaves all caching up to the ARC. This has been shown to work * well for the common read(2)/write(2) case. However, mmap(2) * is problem because it relies on being tightly integrated with the * page cache. To handle this we cache mmap'ed files twice, once in * the ARC and a second time in the page cache. The code is careful * to keep both copies synchronized. * * When a file with an mmap'ed region is written to using write(2) * both the data in the ARC and existing pages in the page cache * are updated. For a read(2) data will be read first from the page * cache then the ARC if needed. Neither a write(2) or read(2) will * will ever result in new pages being added to the page cache. * * New pages are added to the page cache only via .readpage() which * is called when the vfs needs to read a page off disk to back the * virtual memory region. These pages may be modified without * notifying the ARC and will be written out periodically via * .writepage(). This will occur due to either a sync or the usual * page aging behavior. Note because a read(2) of a mmap'ed file * will always check the page cache first even when the ARC is out * of date correct data will still be returned. * * While this implementation ensures correct behavior it does have * have some drawbacks. The most obvious of which is that it * increases the required memory footprint when access mmap'ed * files. It also adds additional complexity to the code keeping * both caches synchronized. * * Longer term it may be possible to cleanly resolve this wart by * mapping page cache pages directly on to the ARC buffers. The * Linux address space operations are flexible enough to allow * selection of which pages back a particular index. The trick * would be working out the details of which subsystem is in * charge, the ARC, the page cache, or both. It may also prove * helpful to move the ARC buffers to a scatter-gather lists * rather than a vmalloc'ed region. */ static int zpl_mmap(struct file *filp, struct vm_area_struct *vma) { struct inode *ip = filp->f_mapping->host; int error; fstrans_cookie_t cookie; cookie = spl_fstrans_mark(); error = -zfs_map(ip, vma->vm_pgoff, (caddr_t *)vma->vm_start, (size_t)(vma->vm_end - vma->vm_start), vma->vm_flags); spl_fstrans_unmark(cookie); if (error) return (error); error = generic_file_mmap(filp, vma); if (error) return (error); return (error); } /* * Populate a page with data for the Linux page cache. This function is * only used to support mmap(2). There will be an identical copy of the * data in the ARC which is kept up to date via .write() and .writepage(). */ static inline int zpl_readpage_common(struct page *pp) { fstrans_cookie_t cookie; ASSERT(PageLocked(pp)); cookie = spl_fstrans_mark(); int error = -zfs_getpage(pp->mapping->host, pp); spl_fstrans_unmark(cookie); unlock_page(pp); return (error); } #ifdef HAVE_VFS_READ_FOLIO static int zpl_read_folio(struct file *filp, struct folio *folio) { return (zpl_readpage_common(&folio->page)); } #else static int zpl_readpage(struct file *filp, struct page *pp) { return (zpl_readpage_common(pp)); } #endif static int zpl_readpage_filler(void *data, struct page *pp) { return (zpl_readpage_common(pp)); } /* * Populate a set of pages with data for the Linux page cache. This * function will only be called for read ahead and never for demand * paging. For simplicity, the code relies on read_cache_pages() to * correctly lock each page for IO and call zpl_readpage(). */ #ifdef HAVE_VFS_READPAGES static int zpl_readpages(struct file *filp, struct address_space *mapping, struct list_head *pages, unsigned nr_pages) { return (read_cache_pages(mapping, pages, zpl_readpage_filler, NULL)); } #else static void zpl_readahead(struct readahead_control *ractl) { struct page *page; while ((page = readahead_page(ractl)) != NULL) { int ret; ret = zpl_readpage_filler(NULL, page); put_page(page); if (ret) break; } } #endif static int zpl_putpage(struct page *pp, struct writeback_control *wbc, void *data) { boolean_t *for_sync = data; fstrans_cookie_t cookie; int ret; ASSERT(PageLocked(pp)); ASSERT(!PageWriteback(pp)); cookie = spl_fstrans_mark(); ret = zfs_putpage(pp->mapping->host, pp, wbc, *for_sync); spl_fstrans_unmark(cookie); return (ret); } #ifdef HAVE_WRITEPAGE_T_FOLIO static int zpl_putfolio(struct folio *pp, struct writeback_control *wbc, void *data) { return (zpl_putpage(&pp->page, wbc, data)); } #endif static inline int zpl_write_cache_pages(struct address_space *mapping, struct writeback_control *wbc, void *data) { int result; #ifdef HAVE_WRITEPAGE_T_FOLIO result = write_cache_pages(mapping, wbc, zpl_putfolio, data); #else result = write_cache_pages(mapping, wbc, zpl_putpage, data); #endif return (result); } static int zpl_writepages(struct address_space *mapping, struct writeback_control *wbc) { znode_t *zp = ITOZ(mapping->host); zfsvfs_t *zfsvfs = ITOZSB(mapping->host); enum writeback_sync_modes sync_mode; int result; if ((result = zpl_enter(zfsvfs, FTAG)) != 0) return (result); if (zfsvfs->z_os->os_sync == ZFS_SYNC_ALWAYS) wbc->sync_mode = WB_SYNC_ALL; zpl_exit(zfsvfs, FTAG); sync_mode = wbc->sync_mode; /* * We don't want to run write_cache_pages() in SYNC mode here, because * that would make putpage() wait for a single page to be committed to * disk every single time, resulting in atrocious performance. Instead * we run it once in non-SYNC mode so that the ZIL gets all the data, * and then we commit it all in one go. */ boolean_t for_sync = (sync_mode == WB_SYNC_ALL); wbc->sync_mode = WB_SYNC_NONE; result = zpl_write_cache_pages(mapping, wbc, &for_sync); if (sync_mode != wbc->sync_mode) { if ((result = zpl_enter_verify_zp(zfsvfs, zp, FTAG)) != 0) return (result); if (zfsvfs->z_log != NULL) zil_commit(zfsvfs->z_log, zp->z_id); zpl_exit(zfsvfs, FTAG); /* * We need to call write_cache_pages() again (we can't just * return after the commit) because the previous call in * non-SYNC mode does not guarantee that we got all the dirty * pages (see the implementation of write_cache_pages() for * details). That being said, this is a no-op in most cases. */ wbc->sync_mode = sync_mode; result = zpl_write_cache_pages(mapping, wbc, &for_sync); } return (result); } /* * Write out dirty pages to the ARC, this function is only required to * support mmap(2). Mapped pages may be dirtied by memory operations * which never call .write(). These dirty pages are kept in sync with * the ARC buffers via this hook. */ static int zpl_writepage(struct page *pp, struct writeback_control *wbc) { if (ITOZSB(pp->mapping->host)->z_os->os_sync == ZFS_SYNC_ALWAYS) wbc->sync_mode = WB_SYNC_ALL; boolean_t for_sync = (wbc->sync_mode == WB_SYNC_ALL); return (zpl_putpage(pp, wbc, &for_sync)); } /* * The flag combination which matches the behavior of zfs_space() is * FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE. The FALLOC_FL_PUNCH_HOLE * flag was introduced in the 2.6.38 kernel. * * The original mode=0 (allocate space) behavior can be reasonably emulated * by checking if enough space exists and creating a sparse file, as real * persistent space reservation is not possible due to COW, snapshots, etc. */ static long zpl_fallocate_common(struct inode *ip, int mode, loff_t offset, loff_t len) { cred_t *cr = CRED(); loff_t olen; fstrans_cookie_t cookie; int error = 0; int test_mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE; if ((mode & ~(FALLOC_FL_KEEP_SIZE | test_mode)) != 0) return (-EOPNOTSUPP); if (offset < 0 || len <= 0) return (-EINVAL); spl_inode_lock(ip); olen = i_size_read(ip); crhold(cr); cookie = spl_fstrans_mark(); if (mode & (test_mode)) { flock64_t bf; if (mode & FALLOC_FL_KEEP_SIZE) { if (offset > olen) goto out_unmark; if (offset + len > olen) len = olen - offset; } bf.l_type = F_WRLCK; bf.l_whence = SEEK_SET; bf.l_start = offset; bf.l_len = len; bf.l_pid = 0; error = -zfs_space(ITOZ(ip), F_FREESP, &bf, O_RDWR, offset, cr); } else if ((mode & ~FALLOC_FL_KEEP_SIZE) == 0) { unsigned int percent = zfs_fallocate_reserve_percent; struct kstatfs statfs; /* Legacy mode, disable fallocate compatibility. */ if (percent == 0) { error = -EOPNOTSUPP; goto out_unmark; } /* * Use zfs_statvfs() instead of dmu_objset_space() since it * also checks project quota limits, which are relevant here. */ error = zfs_statvfs(ip, &statfs); if (error) goto out_unmark; /* * Shrink available space a bit to account for overhead/races. * We know the product previously fit into availbytes from * dmu_objset_space(), so the smaller product will also fit. */ if (len > statfs.f_bavail * (statfs.f_bsize * 100 / percent)) { error = -ENOSPC; goto out_unmark; } if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > olen) error = zfs_freesp(ITOZ(ip), offset + len, 0, 0, FALSE); } out_unmark: spl_fstrans_unmark(cookie); spl_inode_unlock(ip); crfree(cr); return (error); } static long zpl_fallocate(struct file *filp, int mode, loff_t offset, loff_t len) { return zpl_fallocate_common(file_inode(filp), mode, offset, len); } static int zpl_ioctl_getversion(struct file *filp, void __user *arg) { uint32_t generation = file_inode(filp)->i_generation; return (copy_to_user(arg, &generation, sizeof (generation))); } static int zpl_fadvise(struct file *filp, loff_t offset, loff_t len, int advice) { struct inode *ip = file_inode(filp); znode_t *zp = ITOZ(ip); zfsvfs_t *zfsvfs = ITOZSB(ip); objset_t *os = zfsvfs->z_os; int error = 0; if (S_ISFIFO(ip->i_mode)) return (-ESPIPE); if (offset < 0 || len < 0) return (-EINVAL); if ((error = zpl_enter_verify_zp(zfsvfs, zp, FTAG)) != 0) return (error); switch (advice) { case POSIX_FADV_SEQUENTIAL: case POSIX_FADV_WILLNEED: #ifdef HAVE_GENERIC_FADVISE if (zn_has_cached_data(zp, offset, offset + len - 1)) error = generic_fadvise(filp, offset, len, advice); #endif /* * Pass on the caller's size directly, but note that * dmu_prefetch_max will effectively cap it. If there * really is a larger sequential access pattern, perhaps * dmu_zfetch will detect it. */ if (len == 0) len = i_size_read(ip) - offset; dmu_prefetch(os, zp->z_id, 0, offset, len, ZIO_PRIORITY_ASYNC_READ); break; case POSIX_FADV_NORMAL: case POSIX_FADV_RANDOM: case POSIX_FADV_DONTNEED: case POSIX_FADV_NOREUSE: /* ignored for now */ break; default: error = -EINVAL; break; } zfs_exit(zfsvfs, FTAG); return (error); } #define ZFS_FL_USER_VISIBLE (FS_FL_USER_VISIBLE | ZFS_PROJINHERIT_FL) #define ZFS_FL_USER_MODIFIABLE (FS_FL_USER_MODIFIABLE | ZFS_PROJINHERIT_FL) static uint32_t __zpl_ioctl_getflags(struct inode *ip) { uint64_t zfs_flags = ITOZ(ip)->z_pflags; uint32_t ioctl_flags = 0; if (zfs_flags & ZFS_IMMUTABLE) ioctl_flags |= FS_IMMUTABLE_FL; if (zfs_flags & ZFS_APPENDONLY) ioctl_flags |= FS_APPEND_FL; if (zfs_flags & ZFS_NODUMP) ioctl_flags |= FS_NODUMP_FL; if (zfs_flags & ZFS_PROJINHERIT) ioctl_flags |= ZFS_PROJINHERIT_FL; return (ioctl_flags & ZFS_FL_USER_VISIBLE); } /* * Map zfs file z_pflags (xvattr_t) to linux file attributes. Only file * attributes common to both Linux and Solaris are mapped. */ static int zpl_ioctl_getflags(struct file *filp, void __user *arg) { uint32_t flags; int err; flags = __zpl_ioctl_getflags(file_inode(filp)); err = copy_to_user(arg, &flags, sizeof (flags)); return (err); } /* * fchange() is a helper macro to detect if we have been asked to change a * flag. This is ugly, but the requirement that we do this is a consequence of * how the Linux file attribute interface was designed. Another consequence is * that concurrent modification of files suffers from a TOCTOU race. Neither * are things we can fix without modifying the kernel-userland interface, which * is outside of our jurisdiction. */ #define fchange(f0, f1, b0, b1) (!((f0) & (b0)) != !((f1) & (b1))) static int __zpl_ioctl_setflags(struct inode *ip, uint32_t ioctl_flags, xvattr_t *xva) { uint64_t zfs_flags = ITOZ(ip)->z_pflags; xoptattr_t *xoap; if (ioctl_flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | FS_NODUMP_FL | ZFS_PROJINHERIT_FL)) return (-EOPNOTSUPP); if (ioctl_flags & ~ZFS_FL_USER_MODIFIABLE) return (-EACCES); if ((fchange(ioctl_flags, zfs_flags, FS_IMMUTABLE_FL, ZFS_IMMUTABLE) || fchange(ioctl_flags, zfs_flags, FS_APPEND_FL, ZFS_APPENDONLY)) && !capable(CAP_LINUX_IMMUTABLE)) return (-EPERM); if (!zpl_inode_owner_or_capable(zfs_init_idmap, ip)) return (-EACCES); xva_init(xva); xoap = xva_getxoptattr(xva); #define FLAG_CHANGE(iflag, zflag, xflag, xfield) do { \ if (((ioctl_flags & (iflag)) && !(zfs_flags & (zflag))) || \ ((zfs_flags & (zflag)) && !(ioctl_flags & (iflag)))) { \ XVA_SET_REQ(xva, (xflag)); \ (xfield) = ((ioctl_flags & (iflag)) != 0); \ } \ } while (0) FLAG_CHANGE(FS_IMMUTABLE_FL, ZFS_IMMUTABLE, XAT_IMMUTABLE, xoap->xoa_immutable); FLAG_CHANGE(FS_APPEND_FL, ZFS_APPENDONLY, XAT_APPENDONLY, xoap->xoa_appendonly); FLAG_CHANGE(FS_NODUMP_FL, ZFS_NODUMP, XAT_NODUMP, xoap->xoa_nodump); FLAG_CHANGE(ZFS_PROJINHERIT_FL, ZFS_PROJINHERIT, XAT_PROJINHERIT, xoap->xoa_projinherit); #undef FLAG_CHANGE return (0); } static int zpl_ioctl_setflags(struct file *filp, void __user *arg) { struct inode *ip = file_inode(filp); uint32_t flags; cred_t *cr = CRED(); xvattr_t xva; int err; fstrans_cookie_t cookie; if (copy_from_user(&flags, arg, sizeof (flags))) return (-EFAULT); err = __zpl_ioctl_setflags(ip, flags, &xva); if (err) return (err); crhold(cr); cookie = spl_fstrans_mark(); err = -zfs_setattr(ITOZ(ip), (vattr_t *)&xva, 0, cr, zfs_init_idmap); spl_fstrans_unmark(cookie); crfree(cr); return (err); } static int zpl_ioctl_getxattr(struct file *filp, void __user *arg) { zfsxattr_t fsx = { 0 }; struct inode *ip = file_inode(filp); int err; fsx.fsx_xflags = __zpl_ioctl_getflags(ip); fsx.fsx_projid = ITOZ(ip)->z_projid; err = copy_to_user(arg, &fsx, sizeof (fsx)); return (err); } static int zpl_ioctl_setxattr(struct file *filp, void __user *arg) { struct inode *ip = file_inode(filp); zfsxattr_t fsx; cred_t *cr = CRED(); xvattr_t xva; xoptattr_t *xoap; int err; fstrans_cookie_t cookie; if (copy_from_user(&fsx, arg, sizeof (fsx))) return (-EFAULT); if (!zpl_is_valid_projid(fsx.fsx_projid)) return (-EINVAL); err = __zpl_ioctl_setflags(ip, fsx.fsx_xflags, &xva); if (err) return (err); xoap = xva_getxoptattr(&xva); XVA_SET_REQ(&xva, XAT_PROJID); xoap->xoa_projid = fsx.fsx_projid; crhold(cr); cookie = spl_fstrans_mark(); err = -zfs_setattr(ITOZ(ip), (vattr_t *)&xva, 0, cr, zfs_init_idmap); spl_fstrans_unmark(cookie); crfree(cr); return (err); } /* * Expose Additional File Level Attributes of ZFS. */ static int zpl_ioctl_getdosflags(struct file *filp, void __user *arg) { struct inode *ip = file_inode(filp); uint64_t dosflags = ITOZ(ip)->z_pflags; dosflags &= ZFS_DOS_FL_USER_VISIBLE; int err = copy_to_user(arg, &dosflags, sizeof (dosflags)); return (err); } static int __zpl_ioctl_setdosflags(struct inode *ip, uint64_t ioctl_flags, xvattr_t *xva) { uint64_t zfs_flags = ITOZ(ip)->z_pflags; xoptattr_t *xoap; if (ioctl_flags & (~ZFS_DOS_FL_USER_VISIBLE)) return (-EOPNOTSUPP); if ((fchange(ioctl_flags, zfs_flags, ZFS_IMMUTABLE, ZFS_IMMUTABLE) || fchange(ioctl_flags, zfs_flags, ZFS_APPENDONLY, ZFS_APPENDONLY)) && !capable(CAP_LINUX_IMMUTABLE)) return (-EPERM); if (!zpl_inode_owner_or_capable(zfs_init_idmap, ip)) return (-EACCES); xva_init(xva); xoap = xva_getxoptattr(xva); #define FLAG_CHANGE(iflag, xflag, xfield) do { \ if (((ioctl_flags & (iflag)) && !(zfs_flags & (iflag))) || \ ((zfs_flags & (iflag)) && !(ioctl_flags & (iflag)))) { \ XVA_SET_REQ(xva, (xflag)); \ (xfield) = ((ioctl_flags & (iflag)) != 0); \ } \ } while (0) FLAG_CHANGE(ZFS_IMMUTABLE, XAT_IMMUTABLE, xoap->xoa_immutable); FLAG_CHANGE(ZFS_APPENDONLY, XAT_APPENDONLY, xoap->xoa_appendonly); FLAG_CHANGE(ZFS_NODUMP, XAT_NODUMP, xoap->xoa_nodump); FLAG_CHANGE(ZFS_READONLY, XAT_READONLY, xoap->xoa_readonly); FLAG_CHANGE(ZFS_HIDDEN, XAT_HIDDEN, xoap->xoa_hidden); FLAG_CHANGE(ZFS_SYSTEM, XAT_SYSTEM, xoap->xoa_system); FLAG_CHANGE(ZFS_ARCHIVE, XAT_ARCHIVE, xoap->xoa_archive); FLAG_CHANGE(ZFS_NOUNLINK, XAT_NOUNLINK, xoap->xoa_nounlink); FLAG_CHANGE(ZFS_REPARSE, XAT_REPARSE, xoap->xoa_reparse); FLAG_CHANGE(ZFS_OFFLINE, XAT_OFFLINE, xoap->xoa_offline); FLAG_CHANGE(ZFS_SPARSE, XAT_SPARSE, xoap->xoa_sparse); #undef FLAG_CHANGE return (0); } /* * Set Additional File Level Attributes of ZFS. */ static int zpl_ioctl_setdosflags(struct file *filp, void __user *arg) { struct inode *ip = file_inode(filp); uint64_t dosflags; cred_t *cr = CRED(); xvattr_t xva; int err; fstrans_cookie_t cookie; if (copy_from_user(&dosflags, arg, sizeof (dosflags))) return (-EFAULT); err = __zpl_ioctl_setdosflags(ip, dosflags, &xva); if (err) return (err); crhold(cr); cookie = spl_fstrans_mark(); err = -zfs_setattr(ITOZ(ip), (vattr_t *)&xva, 0, cr, zfs_init_idmap); spl_fstrans_unmark(cookie); crfree(cr); return (err); } static long zpl_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { switch (cmd) { case FS_IOC_GETVERSION: return (zpl_ioctl_getversion(filp, (void *)arg)); case FS_IOC_GETFLAGS: return (zpl_ioctl_getflags(filp, (void *)arg)); case FS_IOC_SETFLAGS: return (zpl_ioctl_setflags(filp, (void *)arg)); case ZFS_IOC_FSGETXATTR: return (zpl_ioctl_getxattr(filp, (void *)arg)); case ZFS_IOC_FSSETXATTR: return (zpl_ioctl_setxattr(filp, (void *)arg)); case ZFS_IOC_GETDOSFLAGS: return (zpl_ioctl_getdosflags(filp, (void *)arg)); case ZFS_IOC_SETDOSFLAGS: return (zpl_ioctl_setdosflags(filp, (void *)arg)); case ZFS_IOC_COMPAT_FICLONE: return (zpl_ioctl_ficlone(filp, (void *)arg)); case ZFS_IOC_COMPAT_FICLONERANGE: return (zpl_ioctl_ficlonerange(filp, (void *)arg)); case ZFS_IOC_COMPAT_FIDEDUPERANGE: return (zpl_ioctl_fideduperange(filp, (void *)arg)); default: return (-ENOTTY); } } #ifdef CONFIG_COMPAT static long zpl_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { switch (cmd) { case FS_IOC32_GETVERSION: cmd = FS_IOC_GETVERSION; break; case FS_IOC32_GETFLAGS: cmd = FS_IOC_GETFLAGS; break; case FS_IOC32_SETFLAGS: cmd = FS_IOC_SETFLAGS; break; default: return (-ENOTTY); } return (zpl_ioctl(filp, cmd, (unsigned long)compat_ptr(arg))); } #endif /* CONFIG_COMPAT */ const struct address_space_operations zpl_address_space_operations = { #ifdef HAVE_VFS_READPAGES .readpages = zpl_readpages, #else .readahead = zpl_readahead, #endif #ifdef HAVE_VFS_READ_FOLIO .read_folio = zpl_read_folio, #else .readpage = zpl_readpage, #endif .writepage = zpl_writepage, .writepages = zpl_writepages, .direct_IO = zpl_direct_IO, #ifdef HAVE_VFS_SET_PAGE_DIRTY_NOBUFFERS .set_page_dirty = __set_page_dirty_nobuffers, #endif #ifdef HAVE_VFS_FILEMAP_DIRTY_FOLIO .dirty_folio = filemap_dirty_folio, #endif #ifdef HAVE_VFS_MIGRATE_FOLIO .migrate_folio = migrate_folio, -#else +#elif defined(HAVE_VFS_MIGRATEPAGE) .migratepage = migrate_page, #endif }; const struct file_operations zpl_file_operations = { .open = zpl_open, .release = zpl_release, .llseek = zpl_llseek, .read_iter = zpl_iter_read, .write_iter = zpl_iter_write, #ifdef HAVE_COPY_SPLICE_READ .splice_read = copy_splice_read, #else .splice_read = generic_file_splice_read, #endif .splice_write = iter_file_splice_write, .mmap = zpl_mmap, .fsync = zpl_fsync, .fallocate = zpl_fallocate, .copy_file_range = zpl_copy_file_range, #ifdef HAVE_VFS_CLONE_FILE_RANGE .clone_file_range = zpl_clone_file_range, #endif #ifdef HAVE_VFS_REMAP_FILE_RANGE .remap_file_range = zpl_remap_file_range, #endif #ifdef HAVE_VFS_DEDUPE_FILE_RANGE .dedupe_file_range = zpl_dedupe_file_range, #endif .fadvise = zpl_fadvise, .unlocked_ioctl = zpl_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = zpl_compat_ioctl, #endif }; const struct file_operations zpl_dir_file_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .iterate_shared = zpl_iterate, .fsync = zpl_fsync, .unlocked_ioctl = zpl_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = zpl_compat_ioctl, #endif }; module_param(zfs_fallocate_reserve_percent, uint, 0644); MODULE_PARM_DESC(zfs_fallocate_reserve_percent, "Percentage of length to use for the available capacity check");