diff --git a/sys/arm/conf/ATMEL b/sys/arm/conf/ATMEL index 91ef8a2a71c9..2e8da7d1ac81 100644 --- a/sys/arm/conf/ATMEL +++ b/sys/arm/conf/ATMEL @@ -1,183 +1,183 @@ # Kernel configuration to test compile all the atmel bits with one # configuration. This kernel will not (presently) boot. Do not copy # it to create your own custom config file. # # $FreeBSD$ ident ATMEL include "std.arm" include "../at91/std.atmel" # Typical values for most SoCs and board configurations. Will not work for # at91sam9g45 or on some boards with non u-boot boot loaders. makeoptions KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 makeoptions MODULES_OVERRIDE="dtb/atmel" # list all boards here, but not just yet (no multiboard in mainline). options ARM_MANY_BOARD device at91_board_bwct device at91_board_ethernut5 device at91_board_hl200 device at91_board_hl201 device at91_board_kb920x device at91_board_qila9g20 device at91_board_sam9260ek device at91_board_sam9g20ek device at91_board_sam9x25ek device at91_board_sn9g45 device at91_board_tsc4370 #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel -# required for netbooting +# Debugging support. Always need this: +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +options GDB # Support remote GDB +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones + +# NFS root from boopt/dhcp options BOOTP -options BOOTP_COMPAT options BOOTP_NFSROOT +options BOOTP_COMPAT options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE -# Debugging support. Always need this: -options KDB # Enable kernel debugger support. -# For minimum debugger support (stable branch) use: -options KDB_TRACE # Print a stack trace for a panic. -# For full debugger support use this instead: -options DDB # Support DDB. -options GDB # Support remote GDB. -#options DEADLKRES # Enable the deadlock resolver -#options INVARIANTS # Enable calls of extra sanity checking -#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS # Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed -#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones - # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support -device ate # Atmel AT91 Ethernet friver +device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device pcf8563 # NXP PCF8563 clock/calendar # MMC/SD device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash device at91_spi # Atmel AT91 Serial Peripheral Interface device spibus # SPI bus device at45d # Atmel AT45D device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # USB device (gadget) support device at91_dci # Atmel's usb device device usfs # emulate a flash device cdce # emulate an ethernet device usb_template # Control of the gadget # watchdog device at91_wdt # Atmel AT91 Watchdog Timer device at91_rtc device at91_ssc #device at91_tc # missing? # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 diff --git a/sys/arm/conf/SAM9260EK b/sys/arm/conf/SAM9260EK index ec5d70a38365..30680c509516 100644 --- a/sys/arm/conf/SAM9260EK +++ b/sys/arm/conf/SAM9260EK @@ -1,185 +1,185 @@ # Kernel configuration for Atmel SAM9260-EK eval board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SAM9260EK include "std.arm" include "../at91/std.sam9260ek" # To statically compile in device wiring instead of /boot/device.hints hints "SAM9260EK.hints" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions MODULES_OVERRIDE="" options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NANDFS # NAND file system options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme #options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel -# required for netbooting +# Debugging support. Always need this: +#options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +#options DDB # Enable the kernel debugger +#options GDB # Support remote GDB +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones + +# NFS root from boopt/dhcp #options BOOTP -#options BOOTP_COMPAT #options BOOTP_NFSROOT +#options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" # Alternatively, boot from a USB card. options ROOTDEVNAME=\"ufs:/dev/da0s1a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE -# Debugging support. Always need this: -#options KDB # Enable kernel debugger support. -# For minimum debugger support (stable branch) use: -#options KDB_TRACE # Print a stack trace for a panic. -# For full debugger support use this instead: -#options DDB # Support DDB. -#options GDB # Support remote GDB. -#options DEADLKRES # Enable the deadlock resolver -#options INVARIANTS # Enable calls of extra sanity checking -#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS # Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed -#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones - # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device icee # I2C eeprom # MMC/SD # See comment for DataFlash below device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE # 4 wires options AT91_MCI_SLOT_B # Wired to slot B device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash # The DataFlash and MMC card are wired together, so we must pick one or the # other. This is due to pin mux, and also due to the design of the # SAM9260EK board. SLOT A wouldn't have this issue. #device at91_spi # Atmel AT91 Serial Peripheral Interface #device spibus # SPI bus #device at45d # Atmel AT45D #device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD/DVD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support #options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # watchdog device at91_wdt # Atmel AT91 Watchdog Timer # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 # Coming soon, but not yet #options FDT #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=sam9260ek.dts options EARLY_PRINTF options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 diff --git a/sys/arm/conf/SAM9G20EK b/sys/arm/conf/SAM9G20EK index f9a305258861..4d961c7beeea 100644 --- a/sys/arm/conf/SAM9G20EK +++ b/sys/arm/conf/SAM9G20EK @@ -1,157 +1,166 @@ # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SAM9G20EK include "std.arm" include "../at91/std.sam9g20ek" #To statically compile in device wiring instead of /boot/device.hints hints "SAM9G20EK.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options DDB -options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL -#options BOOTP_NFSROOT -#options BOOTP -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ate0 -#options BOOTP_COMPAT - -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -options ALT_BREAK_TO_DEBUGGER - #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options MUTEX_NOINLINE -options RWLOCK_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -# Debugging for use in -current +# Debugging support. Always need this: +options KDB # Enable kernel debugger support +options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -device random -device loop -device bpf -device ether -device md +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ate0 -device uart # Serial Ports +options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" + +# kernel/memory size reduction +options MUTEX_NOINLINE +options NO_FFS_SNAPSHOT +options NO_SWAPPING +options NO_SYSCTL_DESCR +options RWLOCK_NOINLINE + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter # Ethernet -device ate # Ethernet Driver -device mii +device mii # Minimal MII support +device ate # Atmel AT91 Ethernet driver option AT91_ATE_USE_RMII -device at91_twi # TWI: Two Wire Interface (EEPROM) -device at91_wdt # WDT: Watchdog timer +# I2C +device at91_twi # Atmel AT91 Two-wire Interface +device iic # I2C generic I/O device driver +device iicbus # I2C bus system +device icee -# NAND Flash - Reference design has Samsung 256MB but others possible -device nand # NAND interface on CS3 +# MMC/SD +device at91_mci # Atmel AT91 Multimedia Card Interface +options AT91_MCI_HAS_4WIRE +options AT91_MCI_SLOT_B +device mmc # MMC/SD bus +device mmcsd # MMC/SD memory card +# DataFlash # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c - -# SPI: Data Flash -#device at91_spi # SPI: -#device spibus +#device at91_spi # Atmel AT91 Serial Peripheral Interface +#device spibus # SPI bus #device at45d # at45db642 and maybe others -# MMC/SD -device at91_mci -device mmc -device mmcsd -option AT91_MCI_SLOT_B -option AT91_MCI_HAS_4WIRE - -# iic -device iic -device iicbus -device icee +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +device md # Memory "disks" # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) +# Serial (COM) ports +device uart # Multi-uart driver +options ALT_BREAK_TO_DEBUGGER + # USB support -device ohci # OHCI localbus->USB interface +device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm + +# watchdog +device at91_wdt # Atmel AT91 Watchdog Timer + +# NAND Flash - Reference design has Samsung 256MB but others possible +device nand # NAND interface on CS3