diff --git a/share/examples/bhyve/vmrun.sh b/share/examples/bhyve/vmrun.sh index bfc2aad2cb8c..c3cd05356eea 100755 --- a/share/examples/bhyve/vmrun.sh +++ b/share/examples/bhyve/vmrun.sh @@ -1,395 +1,395 @@ #!/bin/sh # # SPDX-License-Identifier: BSD-2-Clause-FreeBSD # # Copyright (c) 2013 NetApp, Inc. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # LOADER=/usr/sbin/bhyveload BHYVECTL=/usr/sbin/bhyvectl FBSDRUN=/usr/sbin/bhyve DEFAULT_MEMSIZE=512M DEFAULT_CPUS=2 DEFAULT_TAPDEV=tap0 DEFAULT_CONSOLE=stdio DEFAULT_NIC=virtio-net DEFAULT_DISK=virtio-blk DEFAULT_VIRTIO_DISK="./diskdev" DEFAULT_ISOFILE="./release.iso" DEFAULT_VNCHOST="127.0.0.1" DEFAULT_VNCPORT=5900 DEFAULT_VNCSIZE="w=1024,h=768" errmsg() { echo "*** $1" } usage() { local msg=$1 echo "Usage: vmrun.sh [-aAEhiTv] [-c ] [-C ]" \ "[-d ]" echo " [-e ] [-f ]" \ "[-F ]" - echo " [-H ]" + echo " [-H ]" echo " [-I ] [-l ]" echo " [-L ]" echo " [-m ]" \ "[-n ]" echo " [-P ] [-t ] " echo "" echo " -h: display this help message" echo " -a: force memory mapped local APIC access" echo " -A: use AHCI disk emulation instead of ${DEFAULT_DISK}" echo " -c: number of virtual cpus (default: ${DEFAULT_CPUS})" echo " -C: console device (default: ${DEFAULT_CONSOLE})" echo " -d: virtio diskdev file (default: ${DEFAULT_VIRTIO_DISK})" echo " -e: set FreeBSD loader environment variable" echo " -E: Use UEFI mode" echo " -f: Use a specific UEFI firmware" echo " -F: Use a custom UEFI GOP framebuffer size" \ "(default: ${DEFAULT_VNCSIZE})" echo " -H: host filesystem to export to the loader" echo " -i: force boot of the Installation CDROM image" echo " -I: Installation CDROM image location" \ "(default: ${DEFAULT_ISOFILE})" echo " -l: the OS loader to use (default: /boot/userboot.so)" echo " -L: IP address for UEFI GOP VNC server" \ "(default: ${DEFAULT_VNCHOST}" echo " -m: memory size (default: ${DEFAULT_MEMSIZE})" echo " -n: network adapter emulation type" \ "(default: ${DEFAULT_NIC})" echo " -p: pass-through a host PCI device at bus/slot/func" \ "(e.g. 10/0/0)" echo " -P: UEFI GOP VNC port (default: ${DEFAULT_VNCPORT})" echo " -t: tap device for virtio-net (default: $DEFAULT_TAPDEV)" echo " -T: Enable tablet device (for UEFI GOP)" echo " -u: RTC keeps UTC time" echo " -v: Wait for VNC client connection before booting VM" echo " -w: ignore unimplemented MSRs" echo "" [ -n "$msg" ] && errmsg "$msg" exit 1 } if [ `id -u` -ne 0 ]; then errmsg "This script must be executed with superuser privileges" exit 1 fi kldstat -n vmm > /dev/null 2>&1 if [ $? -ne 0 ]; then errmsg "vmm.ko is not loaded" exit 1 fi force_install=0 isofile=${DEFAULT_ISOFILE} memsize=${DEFAULT_MEMSIZE} console=${DEFAULT_CONSOLE} cpus=${DEFAULT_CPUS} nic=${DEFAULT_NIC} tap_total=0 disk_total=0 disk_emulation=${DEFAULT_DISK} loader_opt="" bhyverun_opt="-H -A -P" pass_total=0 # EFI-specific options efi_mode=0 efi_firmware="/usr/local/share/uefi-firmware/BHYVE_UEFI.fd" vncwait="" vnchost=${DEFAULT_VNCHOST} vncport=${DEFAULT_VNCPORT} vncsize=${DEFAULT_VNCSIZE} tablet="" while getopts aAc:C:d:e:Ef:F:g:hH:iI:l:L:m:n:p:P:t:Tuvw c ; do case $c in a) bhyverun_opt="${bhyverun_opt} -a" ;; A) disk_emulation="ahci-hd" ;; c) cpus=${OPTARG} ;; C) console=${OPTARG} ;; d) disk_dev=${OPTARG%%,*} disk_opts=${OPTARG#${disk_dev}} eval "disk_dev${disk_total}=\"${disk_dev}\"" eval "disk_opts${disk_total}=\"${disk_opts}\"" disk_total=$(($disk_total + 1)) ;; e) loader_opt="${loader_opt} -e ${OPTARG}" ;; E) efi_mode=1 ;; f) efi_firmware="${OPTARG}" ;; F) vncsize="${OPTARG}" ;; H) host_base=`realpath ${OPTARG}` ;; i) force_install=1 ;; I) isofile=${OPTARG} ;; l) loader_opt="${loader_opt} -l ${OPTARG}" ;; L) vnchost="${OPTARG}" ;; m) memsize=${OPTARG} ;; n) nic=${OPTARG} ;; p) eval "pass_dev${pass_total}=\"${OPTARG}\"" pass_total=$(($pass_total + 1)) ;; P) vncport="${OPTARG}" ;; t) eval "tap_dev${tap_total}=\"${OPTARG}\"" tap_total=$(($tap_total + 1)) ;; T) tablet="-s 30,xhci,tablet" ;; u) bhyverun_opt="${bhyverun_opt} -u" ;; v) vncwait=",wait" ;; w) bhyverun_opt="${bhyverun_opt} -w" ;; *) usage ;; esac done if [ $tap_total -eq 0 ] ; then tap_total=1 tap_dev0="${DEFAULT_TAPDEV}" fi if [ $disk_total -eq 0 ] ; then disk_total=1 disk_dev0="${DEFAULT_VIRTIO_DISK}" fi shift $((${OPTIND} - 1)) if [ $# -ne 1 ]; then usage "virtual machine name not specified" fi vmname="$1" if [ -n "${host_base}" ]; then loader_opt="${loader_opt} -h ${host_base}" fi # If PCI passthru devices are configured then guest memory must be wired if [ ${pass_total} -gt 0 ]; then loader_opt="${loader_opt} -S" bhyverun_opt="${bhyverun_opt} -S" fi if [ ${efi_mode} -gt 0 ]; then if [ ! -f ${efi_firmware} ]; then echo "Error: EFI Firmware ${efi_firmware} doesn't exist." \ "Try: pkg install uefi-edk2-bhyve" exit 1 fi fi make_and_check_diskdev() { local virtio_diskdev="$1" # Create the virtio diskdev file if needed if [ ! -e ${virtio_diskdev} ]; then echo "virtio disk device file \"${virtio_diskdev}\" does not exist." echo "Creating it ..." truncate -s 8G ${virtio_diskdev} > /dev/null fi if [ ! -r ${virtio_diskdev} ]; then echo "virtio disk device file \"${virtio_diskdev}\" is not readable" exit 1 fi if [ ! -w ${virtio_diskdev} ]; then echo "virtio disk device file \"${virtio_diskdev}\" is not writable" exit 1 fi } echo "Launching virtual machine \"$vmname\" ..." first_diskdev="$disk_dev0" ${BHYVECTL} --vm=${vmname} --destroy > /dev/null 2>&1 while [ 1 ]; do file -s ${first_diskdev} | grep "boot sector" > /dev/null rc=$? if [ $rc -ne 0 ]; then file -s ${first_diskdev} | \ grep ": Unix Fast File sys" > /dev/null rc=$? fi if [ $rc -ne 0 ]; then need_install=1 else need_install=0 fi if [ $force_install -eq 1 -o $need_install -eq 1 ]; then if [ ! -r ${isofile} ]; then echo -n "Installation CDROM image \"${isofile}\" " echo "is not readable" exit 1 fi BOOTDISKS="-d ${isofile}" installer_opt="-s 31:0,ahci-cd,${isofile}" else BOOTDISKS="" i=0 while [ $i -lt $disk_total ] ; do eval "disk=\$disk_dev${i}" if [ -r ${disk} ] ; then BOOTDISKS="$BOOTDISKS -d ${disk} " fi i=$(($i + 1)) done installer_opt="" fi if [ ${efi_mode} -eq 0 ]; then ${LOADER} -c ${console} -m ${memsize} ${BOOTDISKS} \ ${loader_opt} ${vmname} bhyve_exit=$? if [ $bhyve_exit -ne 0 ]; then break fi fi # # Build up args for additional tap and disk devices now. # nextslot=2 # slot 0 is hostbridge, slot 1 is lpc devargs="" # accumulate disk/tap args here i=0 while [ $i -lt $tap_total ] ; do eval "tapname=\$tap_dev${i}" devargs="$devargs -s $nextslot:0,${nic},${tapname} " nextslot=$(($nextslot + 1)) i=$(($i + 1)) done i=0 while [ $i -lt $disk_total ] ; do eval "disk=\$disk_dev${i}" eval "opts=\$disk_opts${i}" make_and_check_diskdev "${disk}" devargs="$devargs -s $nextslot:0,$disk_emulation,${disk}${opts} " nextslot=$(($nextslot + 1)) i=$(($i + 1)) done i=0 while [ $i -lt $pass_total ] ; do eval "pass=\$pass_dev${i}" devargs="$devargs -s $nextslot:0,passthru,${pass} " nextslot=$(($nextslot + 1)) i=$(($i + 1)) done efiargs="" if [ ${efi_mode} -gt 0 ]; then efiargs="-s 29,fbuf,tcp=${vnchost}:${vncport}," efiargs="${efiargs}${vncsize}${vncwait}" efiargs="${efiargs} -l bootrom,${efi_firmware}" efiargs="${efiargs} ${tablet}" fi ${FBSDRUN} -c ${cpus} -m ${memsize} ${bhyverun_opt} \ -s 0:0,hostbridge \ -s 1:0,lpc \ ${efiargs} \ ${devargs} \ -l com1,${console} \ ${installer_opt} \ ${vmname} bhyve_exit=$? # bhyve returns the following status codes: # 0 - VM has been reset # 1 - VM has been powered off # 2 - VM has been halted # 3 - VM generated a triple fault # all other non-zero status codes are errors # if [ $bhyve_exit -ne 0 ]; then break fi done case $bhyve_exit in 0|1|2) # Cleanup /dev/vmm entry when bhyve did not exit # due to an error. ${BHYVECTL} --vm=${vmname} --destroy > /dev/null 2>&1 ;; esac exit $bhyve_exit