diff --git a/sys/arm64/rockchip/rk_pinctrl.c b/sys/arm64/rockchip/rk_pinctrl.c index 6d0d93aee439..c158de40dca5 100644 --- a/sys/arm64/rockchip/rk_pinctrl.c +++ b/sys/arm64/rockchip/rk_pinctrl.c @@ -1,1593 +1,1551 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2018 Emmanuel Vadot * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gpio_if.h" #include "syscon_if.h" #include "fdt_pinctrl_if.h" struct rk_pinctrl_pin_drive { uint32_t bank; uint32_t subbank; uint32_t offset; uint32_t value; uint32_t ma; }; struct rk_pinctrl_bank { uint32_t bank; uint32_t subbank; uint32_t offset; uint32_t nbits; }; struct rk_pinctrl_pin_fixup { uint32_t bank; uint32_t subbank; uint32_t pin; uint32_t reg; uint32_t bit; uint32_t mask; }; struct rk_pinctrl_gpio { uint32_t bank; char *gpio_name; device_t gpio_dev; }; struct rk_pinctrl_softc; struct rk_pinctrl_conf { struct rk_pinctrl_bank *iomux_conf; uint32_t iomux_nbanks; struct rk_pinctrl_pin_fixup *pin_fixup; uint32_t npin_fixup; struct rk_pinctrl_pin_drive *pin_drive; uint32_t npin_drive; struct rk_pinctrl_gpio *gpio_bank; uint32_t ngpio_bank; uint32_t (*get_pd_offset)(struct rk_pinctrl_softc *, uint32_t); struct syscon *(*get_syscon)(struct rk_pinctrl_softc *, uint32_t); int (*parse_bias)(phandle_t, int); int (*resolv_bias_value)(int, int); int (*get_bias_value)(int, int); }; struct rk_pinctrl_softc { struct simplebus_softc simplebus_sc; device_t dev; struct syscon *grf; struct syscon *pmu; struct rk_pinctrl_conf *conf; struct mtx mtx; }; #define RK_PINCTRL_LOCK(_sc) mtx_lock_spin(&(_sc)->mtx) #define RK_PINCTRL_UNLOCK(_sc) mtx_unlock_spin(&(_sc)->mtx) #define RK_PINCTRL_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->mtx, MA_OWNED) #define RK_IOMUX(_bank, _subbank, _offset, _nbits) \ { \ .bank = _bank, \ .subbank = _subbank, \ .offset = _offset, \ .nbits = _nbits, \ } #define RK_PINFIX(_bank, _pin, _reg, _bit, _mask) \ { \ .bank = _bank, \ .pin = _pin, \ .reg = _reg, \ .bit = _bit, \ .mask = _mask, \ } #define RK_PINDRIVE(_bank, _subbank, _offset, _value, _ma) \ { \ .bank = _bank, \ .subbank = _subbank, \ .offset = _offset, \ .value = _value, \ .ma = _ma, \ } #define RK_GPIO(_bank, _name) \ { \ .bank = _bank, \ .gpio_name = _name, \ } static struct rk_pinctrl_gpio rk3288_gpio_bank[] = { RK_GPIO(0, "gpio0"), RK_GPIO(1, "gpio1"), RK_GPIO(2, "gpio2"), RK_GPIO(3, "gpio3"), RK_GPIO(4, "gpio4"), RK_GPIO(5, "gpio5"), RK_GPIO(6, "gpio6"), RK_GPIO(7, "gpio7"), RK_GPIO(8, "gpio8"), }; static struct rk_pinctrl_bank rk3288_iomux_bank[] = { /* bank sub offs nbits */ /* PMU */ RK_IOMUX(0, 0, 0x0084, 2), RK_IOMUX(0, 1, 0x0088, 2), RK_IOMUX(0, 2, 0x008C, 2), /* GFR */ RK_IOMUX(1, 3, 0x000C, 2), RK_IOMUX(2, 0, 0x0010, 2), RK_IOMUX(2, 1, 0x0014, 2), RK_IOMUX(2, 2, 0x0018, 2), RK_IOMUX(2, 3, 0x001C, 2), RK_IOMUX(3, 0, 0x0020, 2), RK_IOMUX(3, 1, 0x0024, 2), RK_IOMUX(3, 2, 0x0028, 2), RK_IOMUX(3, 3, 0x002C, 4), RK_IOMUX(4, 0, 0x0034, 4), RK_IOMUX(4, 1, 0x003C, 4), RK_IOMUX(4, 2, 0x0044, 2), RK_IOMUX(4, 3, 0x0048, 2), /* 5,0 - Empty */ RK_IOMUX(5, 1, 0x0050, 2), RK_IOMUX(5, 2, 0x0054, 2), /* 5,3 - Empty */ RK_IOMUX(6, 0, 0x005C, 2), RK_IOMUX(6, 1, 0x0060, 2), RK_IOMUX(6, 2, 0x0064, 2), /* 6,3 - Empty */ RK_IOMUX(7, 0, 0x006C, 2), RK_IOMUX(7, 1, 0x0070, 2), RK_IOMUX(7, 2, 0x0074, 4), /* 7,3 - Empty */ RK_IOMUX(8, 0, 0x0080, 2), RK_IOMUX(8, 1, 0x0084, 2), /* 8,2 - Empty */ /* 8,3 - Empty */ }; static struct rk_pinctrl_pin_fixup rk3288_pin_fixup[] = { }; static struct rk_pinctrl_pin_drive rk3288_pin_drive[] = { /* bank sub offs val ma */ /* GPIO0A (PMU)*/ RK_PINDRIVE(0, 0, 0x070, 0, 2), RK_PINDRIVE(0, 0, 0x070, 1, 4), RK_PINDRIVE(0, 0, 0x070, 2, 8), RK_PINDRIVE(0, 0, 0x070, 3, 12), /* GPIO0B (PMU)*/ RK_PINDRIVE(0, 1, 0x074, 0, 2), RK_PINDRIVE(0, 1, 0x074, 1, 4), RK_PINDRIVE(0, 1, 0x074, 2, 8), RK_PINDRIVE(0, 1, 0x074, 3, 12), /* GPIO0C (PMU)*/ RK_PINDRIVE(0, 2, 0x078, 0, 2), RK_PINDRIVE(0, 2, 0x078, 1, 4), RK_PINDRIVE(0, 2, 0x078, 2, 8), RK_PINDRIVE(0, 2, 0x078, 3, 12), /* GPIO1D */ RK_PINDRIVE(1, 3, 0x1CC, 0, 2), RK_PINDRIVE(1, 3, 0x1CC, 1, 4), RK_PINDRIVE(1, 3, 0x1CC, 2, 8), RK_PINDRIVE(1, 3, 0x1CC, 3, 12), /* GPIO2A */ RK_PINDRIVE(2, 0, 0x1D0, 0, 2), RK_PINDRIVE(2, 0, 0x1D0, 1, 4), RK_PINDRIVE(2, 0, 0x1D0, 2, 8), RK_PINDRIVE(2, 0, 0x1D0, 3, 12), /* GPIO2B */ RK_PINDRIVE(2, 1, 0x1D4, 0, 2), RK_PINDRIVE(2, 1, 0x1D4, 1, 4), RK_PINDRIVE(2, 1, 0x1D4, 2, 8), RK_PINDRIVE(2, 1, 0x1D4, 3, 12), /* GPIO2C */ RK_PINDRIVE(2, 2, 0x1D8, 0, 2), RK_PINDRIVE(2, 2, 0x1D8, 1, 4), RK_PINDRIVE(2, 2, 0x1D8, 2, 8), RK_PINDRIVE(2, 2, 0x1D8, 3, 12), /* GPIO2D */ RK_PINDRIVE(2, 3, 0x1DC, 0, 2), RK_PINDRIVE(2, 3, 0x1DC, 1, 4), RK_PINDRIVE(2, 3, 0x1DC, 2, 8), RK_PINDRIVE(2, 3, 0x1DC, 3, 12), /* GPIO3A */ RK_PINDRIVE(3, 0, 0x1E0, 0, 2), RK_PINDRIVE(3, 0, 0x1E0, 1, 4), RK_PINDRIVE(3, 0, 0x1E0, 2, 8), RK_PINDRIVE(3, 0, 0x1E0, 3, 12), /* GPIO3B */ RK_PINDRIVE(3, 1, 0x1E4, 0, 2), RK_PINDRIVE(3, 1, 0x1E4, 1, 4), RK_PINDRIVE(3, 1, 0x1E4, 2, 8), RK_PINDRIVE(3, 1, 0x1E4, 3, 12), /* GPIO3C */ RK_PINDRIVE(3, 2, 0x1E8, 0, 2), RK_PINDRIVE(3, 2, 0x1E8, 1, 4), RK_PINDRIVE(3, 2, 0x1E8, 2, 8), RK_PINDRIVE(3, 2, 0x1E8, 3, 12), /* GPIO3D */ RK_PINDRIVE(3, 3, 0x1EC, 0, 2), RK_PINDRIVE(3, 3, 0x1EC, 1, 4), RK_PINDRIVE(3, 3, 0x1EC, 2, 8), RK_PINDRIVE(3, 3, 0x1EC, 3, 12), /* GPIO4A */ RK_PINDRIVE(4, 0, 0x1F0, 0, 2), RK_PINDRIVE(4, 0, 0x1F0, 1, 4), RK_PINDRIVE(4, 0, 0x1F0, 2, 8), RK_PINDRIVE(4, 0, 0x1F0, 3, 12), /* GPIO4B */ RK_PINDRIVE(4, 1, 0x1F4, 0, 2), RK_PINDRIVE(4, 1, 0x1F4, 1, 4), RK_PINDRIVE(4, 1, 0x1F4, 2, 8), RK_PINDRIVE(4, 1, 0x1F4, 3, 12), /* GPIO4C */ RK_PINDRIVE(4, 2, 0x1F8, 0, 2), RK_PINDRIVE(4, 2, 0x1F8, 1, 4), RK_PINDRIVE(4, 2, 0x1F8, 2, 8), RK_PINDRIVE(4, 2, 0x1F8, 3, 12), /* GPIO4D */ RK_PINDRIVE(4, 3, 0x1FC, 0, 2), RK_PINDRIVE(4, 3, 0x1FC, 1, 4), RK_PINDRIVE(4, 3, 0x1FC, 2, 8), RK_PINDRIVE(4, 3, 0x1FC, 3, 12), /* GPIO5B */ RK_PINDRIVE(5, 1, 0x204, 0, 2), RK_PINDRIVE(5, 1, 0x204, 1, 4), RK_PINDRIVE(5, 1, 0x204, 2, 8), RK_PINDRIVE(5, 1, 0x204, 3, 12), /* GPIO5C */ RK_PINDRIVE(5, 2, 0x208, 0, 2), RK_PINDRIVE(5, 2, 0x208, 1, 4), RK_PINDRIVE(5, 2, 0x208, 2, 8), RK_PINDRIVE(5, 2, 0x208, 3, 12), /* GPIO6A */ RK_PINDRIVE(6, 0, 0x210, 0, 2), RK_PINDRIVE(6, 0, 0x210, 1, 4), RK_PINDRIVE(6, 0, 0x210, 2, 8), RK_PINDRIVE(6, 0, 0x210, 3, 12), /* GPIO6B */ RK_PINDRIVE(6, 1, 0x214, 0, 2), RK_PINDRIVE(6, 1, 0x214, 1, 4), RK_PINDRIVE(6, 1, 0x214, 2, 8), RK_PINDRIVE(6, 1, 0x214, 3, 12), /* GPIO6C */ RK_PINDRIVE(6, 2, 0x218, 0, 2), RK_PINDRIVE(6, 2, 0x218, 1, 4), RK_PINDRIVE(6, 2, 0x218, 2, 8), RK_PINDRIVE(6, 2, 0x218, 3, 12), /* GPIO7A */ RK_PINDRIVE(7, 0, 0x220, 0, 2), RK_PINDRIVE(7, 0, 0x220, 1, 4), RK_PINDRIVE(7, 0, 0x220, 2, 8), RK_PINDRIVE(7, 0, 0x220, 3, 12), /* GPIO7B */ RK_PINDRIVE(7, 1, 0x224, 0, 2), RK_PINDRIVE(7, 1, 0x224, 1, 4), RK_PINDRIVE(7, 1, 0x224, 2, 8), RK_PINDRIVE(7, 1, 0x224, 3, 12), /* GPIO7C */ RK_PINDRIVE(7, 2, 0x228, 0, 2), RK_PINDRIVE(7, 2, 0x228, 1, 4), RK_PINDRIVE(7, 2, 0x228, 2, 8), RK_PINDRIVE(7, 2, 0x228, 3, 12), /* GPIO8A */ RK_PINDRIVE(8, 0, 0x230, 0, 2), RK_PINDRIVE(8, 0, 0x230, 1, 4), RK_PINDRIVE(8, 0, 0x230, 2, 8), RK_PINDRIVE(8, 0, 0x230, 3, 12), /* GPIO8B */ RK_PINDRIVE(8, 1, 0x234, 0, 2), RK_PINDRIVE(8, 1, 0x234, 1, 4), RK_PINDRIVE(8, 1, 0x234, 2, 8), RK_PINDRIVE(8, 1, 0x234, 3, 12), }; static uint32_t rk3288_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank) { if (bank == 0) return (0x064); /* PMU */ return (0x130); } static struct syscon * rk3288_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank) { if (bank == 0) return (sc->pmu); return (sc->grf); } static int rk3288_parse_bias(phandle_t node, int bank) { if (OF_hasprop(node, "bias-disable")) return (0); if (OF_hasprop(node, "bias-pull-up")) return (1); if (OF_hasprop(node, "bias-pull-down")) return (2); return (-1); } static int rk3288_resolv_bias_value(int bank, int bias) { int rv = 0; if (bias == 1) rv = GPIO_PIN_PULLUP; else if (bias == 2) rv = GPIO_PIN_PULLDOWN; return (rv); } static int rk3288_get_bias_value(int bank, int bias) { int rv = 0; if (bias & GPIO_PIN_PULLUP) rv = 1; else if (bias & GPIO_PIN_PULLDOWN) rv = 2; return (rv); } struct rk_pinctrl_conf rk3288_conf = { .iomux_conf = rk3288_iomux_bank, .iomux_nbanks = nitems(rk3288_iomux_bank), .pin_fixup = rk3288_pin_fixup, .npin_fixup = nitems(rk3288_pin_fixup), .pin_drive = rk3288_pin_drive, .npin_drive = nitems(rk3288_pin_drive), .gpio_bank = rk3288_gpio_bank, .ngpio_bank = nitems(rk3288_gpio_bank), .get_pd_offset = rk3288_get_pd_offset, .get_syscon = rk3288_get_syscon, .parse_bias = rk3288_parse_bias, .resolv_bias_value = rk3288_resolv_bias_value, .get_bias_value = rk3288_get_bias_value, }; static struct rk_pinctrl_gpio rk3328_gpio_bank[] = { RK_GPIO(0, "gpio0"), RK_GPIO(1, "gpio1"), RK_GPIO(2, "gpio2"), RK_GPIO(3, "gpio3"), }; static struct rk_pinctrl_bank rk3328_iomux_bank[] = { /* bank sub offs nbits */ RK_IOMUX(0, 0, 0x0000, 2), RK_IOMUX(0, 1, 0x0004, 2), RK_IOMUX(0, 2, 0x0008, 2), RK_IOMUX(0, 3, 0x000C, 2), RK_IOMUX(1, 0, 0x0010, 2), RK_IOMUX(1, 1, 0x0014, 2), RK_IOMUX(1, 2, 0x0018, 2), RK_IOMUX(1, 3, 0x001C, 2), RK_IOMUX(2, 0, 0x0020, 2), RK_IOMUX(2, 1, 0x0024, 3), RK_IOMUX(2, 2, 0x002c, 3), RK_IOMUX(2, 3, 0x0034, 2), RK_IOMUX(3, 0, 0x0038, 3), RK_IOMUX(3, 1, 0x0040, 3), RK_IOMUX(3, 2, 0x0048, 2), RK_IOMUX(3, 3, 0x004c, 2), }; static struct rk_pinctrl_pin_fixup rk3328_pin_fixup[] = { /* bank pin reg bit mask */ RK_PINFIX(2, 12, 0x24, 8, 0x300), RK_PINFIX(2, 15, 0x28, 0, 0x7), RK_PINFIX(2, 23, 0x30, 14, 0x6000), }; static struct rk_pinctrl_pin_drive rk3328_pin_drive[] = { /* bank sub offs val ma */ RK_PINDRIVE(0, 0, 0x200, 0, 2), RK_PINDRIVE(0, 0, 0x200, 1, 4), RK_PINDRIVE(0, 0, 0x200, 2, 8), RK_PINDRIVE(0, 0, 0x200, 3, 12), RK_PINDRIVE(0, 1, 0x204, 0, 2), RK_PINDRIVE(0, 1, 0x204, 1, 4), RK_PINDRIVE(0, 1, 0x204, 2, 8), RK_PINDRIVE(0, 1, 0x204, 3, 12), RK_PINDRIVE(0, 2, 0x208, 0, 2), RK_PINDRIVE(0, 2, 0x208, 1, 4), RK_PINDRIVE(0, 2, 0x208, 2, 8), RK_PINDRIVE(0, 2, 0x208, 3, 12), RK_PINDRIVE(0, 3, 0x20C, 0, 2), RK_PINDRIVE(0, 3, 0x20C, 1, 4), RK_PINDRIVE(0, 3, 0x20C, 2, 8), RK_PINDRIVE(0, 3, 0x20C, 3, 12), RK_PINDRIVE(1, 0, 0x210, 0, 2), RK_PINDRIVE(1, 0, 0x210, 1, 4), RK_PINDRIVE(1, 0, 0x210, 2, 8), RK_PINDRIVE(1, 0, 0x210, 3, 12), RK_PINDRIVE(1, 1, 0x214, 0, 2), RK_PINDRIVE(1, 1, 0x214, 1, 4), RK_PINDRIVE(1, 1, 0x214, 2, 8), RK_PINDRIVE(1, 1, 0x214, 3, 12), RK_PINDRIVE(1, 2, 0x218, 0, 2), RK_PINDRIVE(1, 2, 0x218, 1, 4), RK_PINDRIVE(1, 2, 0x218, 2, 8), RK_PINDRIVE(1, 2, 0x218, 3, 12), RK_PINDRIVE(1, 3, 0x21C, 0, 2), RK_PINDRIVE(1, 3, 0x21C, 1, 4), RK_PINDRIVE(1, 3, 0x21C, 2, 8), RK_PINDRIVE(1, 3, 0x21C, 3, 12), RK_PINDRIVE(2, 0, 0x220, 0, 2), RK_PINDRIVE(2, 0, 0x220, 1, 4), RK_PINDRIVE(2, 0, 0x220, 2, 8), RK_PINDRIVE(2, 0, 0x220, 3, 12), RK_PINDRIVE(2, 1, 0x224, 0, 2), RK_PINDRIVE(2, 1, 0x224, 1, 4), RK_PINDRIVE(2, 1, 0x224, 2, 8), RK_PINDRIVE(2, 1, 0x224, 3, 12), RK_PINDRIVE(2, 2, 0x228, 0, 2), RK_PINDRIVE(2, 2, 0x228, 1, 4), RK_PINDRIVE(2, 2, 0x228, 2, 8), RK_PINDRIVE(2, 2, 0x228, 3, 12), RK_PINDRIVE(2, 3, 0x22C, 0, 2), RK_PINDRIVE(2, 3, 0x22C, 1, 4), RK_PINDRIVE(2, 3, 0x22C, 2, 8), RK_PINDRIVE(2, 3, 0x22C, 3, 12), RK_PINDRIVE(3, 0, 0x230, 0, 2), RK_PINDRIVE(3, 0, 0x230, 1, 4), RK_PINDRIVE(3, 0, 0x230, 2, 8), RK_PINDRIVE(3, 0, 0x230, 3, 12), RK_PINDRIVE(3, 1, 0x234, 0, 2), RK_PINDRIVE(3, 1, 0x234, 1, 4), RK_PINDRIVE(3, 1, 0x234, 2, 8), RK_PINDRIVE(3, 1, 0x234, 3, 12), RK_PINDRIVE(3, 2, 0x238, 0, 2), RK_PINDRIVE(3, 2, 0x238, 1, 4), RK_PINDRIVE(3, 2, 0x238, 2, 8), RK_PINDRIVE(3, 2, 0x238, 3, 12), RK_PINDRIVE(3, 3, 0x23C, 0, 2), RK_PINDRIVE(3, 3, 0x23C, 1, 4), RK_PINDRIVE(3, 3, 0x23C, 2, 8), RK_PINDRIVE(3, 3, 0x23C, 3, 12), }; static uint32_t rk3328_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank) { return (0x100); } static struct syscon * rk3328_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank) { return (sc->grf); } struct rk_pinctrl_conf rk3328_conf = { .iomux_conf = rk3328_iomux_bank, .iomux_nbanks = nitems(rk3328_iomux_bank), .pin_fixup = rk3328_pin_fixup, .npin_fixup = nitems(rk3328_pin_fixup), .pin_drive = rk3328_pin_drive, .npin_drive = nitems(rk3328_pin_drive), .gpio_bank = rk3328_gpio_bank, .ngpio_bank = nitems(rk3328_gpio_bank), .get_pd_offset = rk3328_get_pd_offset, .get_syscon = rk3328_get_syscon, .parse_bias = rk3288_parse_bias, .resolv_bias_value = rk3288_resolv_bias_value, .get_bias_value = rk3288_get_bias_value, }; static struct rk_pinctrl_gpio rk3399_gpio_bank[] = { RK_GPIO(0, "gpio0"), RK_GPIO(1, "gpio1"), RK_GPIO(2, "gpio2"), RK_GPIO(3, "gpio3"), RK_GPIO(4, "gpio4"), }; static struct rk_pinctrl_bank rk3399_iomux_bank[] = { /* bank sub offs nbits */ RK_IOMUX(0, 0, 0x0000, 2), RK_IOMUX(0, 1, 0x0004, 2), RK_IOMUX(0, 2, 0x0008, 2), RK_IOMUX(0, 3, 0x000C, 2), RK_IOMUX(1, 0, 0x0010, 2), RK_IOMUX(1, 1, 0x0014, 2), RK_IOMUX(1, 2, 0x0018, 2), RK_IOMUX(1, 3, 0x001C, 2), RK_IOMUX(2, 0, 0xE000, 2), RK_IOMUX(2, 1, 0xE004, 2), RK_IOMUX(2, 2, 0xE008, 2), RK_IOMUX(2, 3, 0xE00C, 2), RK_IOMUX(3, 0, 0xE010, 2), RK_IOMUX(3, 1, 0xE014, 2), RK_IOMUX(3, 2, 0xE018, 2), RK_IOMUX(3, 3, 0xE01C, 2), RK_IOMUX(4, 0, 0xE020, 2), RK_IOMUX(4, 1, 0xE024, 2), RK_IOMUX(4, 2, 0xE028, 2), RK_IOMUX(4, 3, 0xE02C, 2), }; static struct rk_pinctrl_pin_fixup rk3399_pin_fixup[] = {}; static struct rk_pinctrl_pin_drive rk3399_pin_drive[] = { /* bank sub offs val ma */ /* GPIO0A */ RK_PINDRIVE(0, 0, 0x80, 0, 5), RK_PINDRIVE(0, 0, 0x80, 1, 10), RK_PINDRIVE(0, 0, 0x80, 2, 15), RK_PINDRIVE(0, 0, 0x80, 3, 20), /* GPIOB */ RK_PINDRIVE(0, 1, 0x88, 0, 5), RK_PINDRIVE(0, 1, 0x88, 1, 10), RK_PINDRIVE(0, 1, 0x88, 2, 15), RK_PINDRIVE(0, 1, 0x88, 3, 20), /* GPIO1A */ RK_PINDRIVE(1, 0, 0xA0, 0, 3), RK_PINDRIVE(1, 0, 0xA0, 1, 6), RK_PINDRIVE(1, 0, 0xA0, 2, 9), RK_PINDRIVE(1, 0, 0xA0, 3, 12), /* GPIO1B */ RK_PINDRIVE(1, 1, 0xA8, 0, 3), RK_PINDRIVE(1, 1, 0xA8, 1, 6), RK_PINDRIVE(1, 1, 0xA8, 2, 9), RK_PINDRIVE(1, 1, 0xA8, 3, 12), /* GPIO1C */ RK_PINDRIVE(1, 2, 0xB0, 0, 3), RK_PINDRIVE(1, 2, 0xB0, 1, 6), RK_PINDRIVE(1, 2, 0xB0, 2, 9), RK_PINDRIVE(1, 2, 0xB0, 3, 12), /* GPIO1D */ RK_PINDRIVE(1, 3, 0xB8, 0, 3), RK_PINDRIVE(1, 3, 0xB8, 1, 6), RK_PINDRIVE(1, 3, 0xB8, 2, 9), RK_PINDRIVE(1, 3, 0xB8, 3, 12), }; static uint32_t rk3399_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank) { if (bank < 2) return (0x40); return (0xE040); } static struct syscon * rk3399_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank) { if (bank < 2) return (sc->pmu); return (sc->grf); } static int rk3399_parse_bias(phandle_t node, int bank) { int pullup, pulldown; if (OF_hasprop(node, "bias-disable")) return (0); switch (bank) { case 0: case 2: pullup = 3; pulldown = 1; break; case 1: case 3: case 4: pullup = 1; pulldown = 2; break; } if (OF_hasprop(node, "bias-pull-up")) return (pullup); if (OF_hasprop(node, "bias-pull-down")) return (pulldown); return (-1); } static int rk3399_resolv_bias_value(int bank, int bias) { int rv = 0; switch (bank) { case 0: case 2: if (bias == 3) rv = GPIO_PIN_PULLUP; else if (bias == 1) rv = GPIO_PIN_PULLDOWN; break; case 1: case 3: case 4: if (bias == 1) rv = GPIO_PIN_PULLUP; else if (bias == 2) rv = GPIO_PIN_PULLDOWN; break; } return (rv); } static int rk3399_get_bias_value(int bank, int bias) { int rv = 0; switch (bank) { case 0: case 2: if (bias & GPIO_PIN_PULLUP) rv = 3; else if (bias & GPIO_PIN_PULLDOWN) rv = 1; break; case 1: case 3: case 4: if (bias & GPIO_PIN_PULLUP) rv = 1; else if (bias & GPIO_PIN_PULLDOWN) rv = 2; break; } return (rv); } struct rk_pinctrl_conf rk3399_conf = { .iomux_conf = rk3399_iomux_bank, .iomux_nbanks = nitems(rk3399_iomux_bank), .pin_fixup = rk3399_pin_fixup, .npin_fixup = nitems(rk3399_pin_fixup), .pin_drive = rk3399_pin_drive, .npin_drive = nitems(rk3399_pin_drive), .gpio_bank = rk3399_gpio_bank, .ngpio_bank = nitems(rk3399_gpio_bank), .get_pd_offset = rk3399_get_pd_offset, .get_syscon = rk3399_get_syscon, .parse_bias = rk3399_parse_bias, .resolv_bias_value = rk3399_resolv_bias_value, .get_bias_value = rk3399_get_bias_value, }; static struct rk_pinctrl_gpio rk3568_gpio_bank[] = { RK_GPIO(0, "gpio0"), RK_GPIO(1, "gpio1"), RK_GPIO(2, "gpio2"), RK_GPIO(3, "gpio3"), RK_GPIO(4, "gpio4"), }; static struct rk_pinctrl_bank rk3568_iomux_bank[] = { /* bank sub offs nbits */ RK_IOMUX(0, 0, 0x0000, 4), /* PMU_GRF */ RK_IOMUX(0, 1, 0x0008, 4), RK_IOMUX(0, 2, 0x0010, 4), RK_IOMUX(0, 3, 0x0018, 4), RK_IOMUX(1, 0, 0x0000, 4), /* SYS_GRF */ RK_IOMUX(1, 1, 0x0008, 4), RK_IOMUX(1, 2, 0x0010, 4), RK_IOMUX(1, 3, 0x0018, 4), RK_IOMUX(2, 0, 0x0020, 4), RK_IOMUX(2, 1, 0x0028, 4), RK_IOMUX(2, 2, 0x0030, 4), RK_IOMUX(2, 3, 0x0038, 4), RK_IOMUX(3, 0, 0x0040, 4), RK_IOMUX(3, 1, 0x0048, 4), RK_IOMUX(3, 2, 0x0050, 4), RK_IOMUX(3, 3, 0x0058, 4), RK_IOMUX(4, 0, 0x0060, 4), RK_IOMUX(4, 1, 0x0068, 4), RK_IOMUX(4, 2, 0x0070, 4), RK_IOMUX(4, 3, 0x0078, 4), }; static struct rk_pinctrl_pin_fixup rk3568_pin_fixup[] = {}; static struct rk_pinctrl_pin_drive rk3568_pin_drive[] = { /* bank sub offs val ma */ /* GPIO0A */ RK_PINDRIVE(0, 0, 0x0020, 0, 2), RK_PINDRIVE(0, 0, 0x0020, 1, 4), RK_PINDRIVE(0, 0, 0x0020, 2, 8), RK_PINDRIVE(0, 0, 0x0020, 3, 12), /* GPIO0B */ RK_PINDRIVE(0, 1, 0x0024, 0, 2), RK_PINDRIVE(0, 1, 0x0024, 1, 4), RK_PINDRIVE(0, 1, 0x0024, 2, 8), RK_PINDRIVE(0, 1, 0x0024, 3, 12), /* GPIO0C */ RK_PINDRIVE(0, 1, 0x0028, 0, 2), RK_PINDRIVE(0, 1, 0x0028, 1, 4), RK_PINDRIVE(0, 1, 0x0028, 2, 8), RK_PINDRIVE(0, 1, 0x0028, 3, 12), /* GPIO0D */ RK_PINDRIVE(0, 1, 0x002c, 0, 2), RK_PINDRIVE(0, 1, 0x002c, 1, 4), RK_PINDRIVE(0, 1, 0x002c, 2, 8), RK_PINDRIVE(0, 1, 0x002c, 3, 12), /* GPIO1A */ RK_PINDRIVE(1, 0, 0x0080, 0, 2), RK_PINDRIVE(1, 0, 0x0080, 1, 4), RK_PINDRIVE(1, 0, 0x0080, 2, 8), RK_PINDRIVE(1, 0, 0x0080, 3, 12), /* GPIO1B */ RK_PINDRIVE(1, 1, 0x0084, 0, 2), RK_PINDRIVE(1, 1, 0x0084, 1, 4), RK_PINDRIVE(1, 1, 0x0084, 2, 8), RK_PINDRIVE(1, 1, 0x0084, 3, 12), /* GPIO1C */ RK_PINDRIVE(1, 2, 0x0088, 0, 2), RK_PINDRIVE(1, 2, 0x0088, 1, 4), RK_PINDRIVE(1, 2, 0x0088, 2, 8), RK_PINDRIVE(1, 2, 0x0088, 3, 12), /* GPIO1D */ RK_PINDRIVE(1, 3, 0x008c, 0, 2), RK_PINDRIVE(1, 3, 0x008c, 1, 4), RK_PINDRIVE(1, 3, 0x008c, 2, 8), RK_PINDRIVE(1, 3, 0x008c, 3, 12), /* GPIO2A */ RK_PINDRIVE(2, 0, 0x0090, 0, 2), RK_PINDRIVE(2, 0, 0x0090, 1, 4), RK_PINDRIVE(2, 0, 0x0090, 2, 8), RK_PINDRIVE(2, 0, 0x0090, 3, 12), /* GPIO2B */ RK_PINDRIVE(2, 1, 0x0094, 0, 2), RK_PINDRIVE(2, 1, 0x0094, 1, 4), RK_PINDRIVE(2, 1, 0x0094, 2, 8), RK_PINDRIVE(2, 1, 0x0094, 3, 12), /* GPIO2C */ RK_PINDRIVE(2, 2, 0x0098, 0, 2), RK_PINDRIVE(2, 2, 0x0098, 1, 4), RK_PINDRIVE(2, 2, 0x0098, 2, 8), RK_PINDRIVE(2, 2, 0x0098, 3, 12), /* GPIO2D */ RK_PINDRIVE(2, 3, 0x009c, 0, 2), RK_PINDRIVE(2, 3, 0x009c, 1, 4), RK_PINDRIVE(2, 3, 0x009c, 2, 8), RK_PINDRIVE(2, 3, 0x009c, 3, 12), /* GPIO3A */ RK_PINDRIVE(3, 0, 0x00a0, 0, 2), RK_PINDRIVE(3, 0, 0x00a0, 1, 4), RK_PINDRIVE(3, 0, 0x00a0, 2, 8), RK_PINDRIVE(3, 0, 0x00a0, 3, 12), /* GPIO3B */ RK_PINDRIVE(3, 1, 0x00a4, 0, 2), RK_PINDRIVE(3, 1, 0x00a4, 1, 4), RK_PINDRIVE(3, 1, 0x00a4, 2, 8), RK_PINDRIVE(3, 1, 0x00a4, 3, 12), /* GPIO3C */ RK_PINDRIVE(3, 2, 0x00a8, 0, 2), RK_PINDRIVE(3, 2, 0x00a8, 1, 4), RK_PINDRIVE(3, 2, 0x00a8, 2, 8), RK_PINDRIVE(3, 2, 0x00a8, 3, 12), /* GPIO3D */ RK_PINDRIVE(3, 3, 0x00ac, 0, 2), RK_PINDRIVE(3, 3, 0x00ac, 1, 4), RK_PINDRIVE(3, 3, 0x00ac, 2, 8), RK_PINDRIVE(3, 3, 0x00ac, 3, 12), /* GPIO4A */ RK_PINDRIVE(4, 0, 0x00b0, 0, 2), RK_PINDRIVE(4, 0, 0x00b0, 1, 4), RK_PINDRIVE(4, 0, 0x00b0, 2, 8), RK_PINDRIVE(4, 0, 0x00b0, 3, 12), /* GPIO4B */ RK_PINDRIVE(4, 1, 0x00b4, 0, 2), RK_PINDRIVE(4, 1, 0x00b4, 1, 4), RK_PINDRIVE(4, 1, 0x00b4, 2, 8), RK_PINDRIVE(4, 1, 0x00b4, 3, 12), /* GPIO4C */ RK_PINDRIVE(4, 2, 0x00b8, 0, 2), RK_PINDRIVE(4, 2, 0x00b8, 1, 4), RK_PINDRIVE(4, 2, 0x00b8, 2, 8), RK_PINDRIVE(4, 2, 0x00b8, 3, 12), /* GPIO4D */ RK_PINDRIVE(4, 3, 0x00bc, 0, 2), RK_PINDRIVE(4, 3, 0x00bc, 1, 4), RK_PINDRIVE(4, 3, 0x00bc, 2, 8), RK_PINDRIVE(4, 3, 0x00bc, 3, 12), }; static uint32_t rk3568_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank) { return (0); } static struct syscon * rk3568_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank) { if (bank) return (sc->grf); else return (sc->pmu); } static int rk3568_parse_bias(phandle_t node, int bank) { if (OF_hasprop(node, "bias-disable")) return (0); if (OF_hasprop(node, "bias-pull-up")) return (1); if (OF_hasprop(node, "bias-pull-down")) return (2); return (-1); } static int rk3568_resolv_bias_value(int bank, int bias) { if (bias == 1) return (GPIO_PIN_PULLUP); if (bias == 2) return (GPIO_PIN_PULLDOWN); return (0); } static int rk3568_get_bias_value(int bank, int bias) { if (bias & GPIO_PIN_PULLUP) return (1); if (bias & GPIO_PIN_PULLDOWN) return (2); return (0); } struct rk_pinctrl_conf rk3568_conf = { .iomux_conf = rk3568_iomux_bank, .iomux_nbanks = nitems(rk3568_iomux_bank), .pin_fixup = rk3568_pin_fixup, .npin_fixup = nitems(rk3568_pin_fixup), .pin_drive = rk3568_pin_drive, .npin_drive = nitems(rk3568_pin_drive), .gpio_bank = rk3568_gpio_bank, .ngpio_bank = nitems(rk3568_gpio_bank), .get_pd_offset = rk3568_get_pd_offset, .get_syscon = rk3568_get_syscon, .parse_bias = rk3568_parse_bias, .resolv_bias_value = rk3568_resolv_bias_value, .get_bias_value = rk3568_get_bias_value, }; static struct ofw_compat_data compat_data[] = { {"rockchip,rk3288-pinctrl", (uintptr_t)&rk3288_conf}, {"rockchip,rk3328-pinctrl", (uintptr_t)&rk3328_conf}, {"rockchip,rk3399-pinctrl", (uintptr_t)&rk3399_conf}, {"rockchip,rk3568-pinctrl", (uintptr_t)&rk3568_conf}, {NULL, 0} }; static int rk_pinctrl_parse_drive(struct rk_pinctrl_softc *sc, phandle_t node, uint32_t bank, uint32_t subbank, uint32_t *drive, uint32_t *offset) { uint32_t value; int i; if (OF_getencprop(node, "drive-strength", &value, sizeof(value)) != 0) return (-1); /* Map to the correct drive value */ for (i = 0; i < sc->conf->npin_drive; i++) { if (sc->conf->pin_drive[i].bank != bank && sc->conf->pin_drive[i].subbank != subbank) continue; if (sc->conf->pin_drive[i].ma == value) { *drive = sc->conf->pin_drive[i].value; return (0); } } return (-1); } static void rk_pinctrl_get_fixup(struct rk_pinctrl_softc *sc, uint32_t bank, uint32_t pin, uint32_t *reg, uint32_t *mask, uint32_t *bit) { int i; for (i = 0; i < sc->conf->npin_fixup; i++) if (sc->conf->pin_fixup[i].bank == bank && sc->conf->pin_fixup[i].pin == pin) { *reg = sc->conf->pin_fixup[i].reg; *mask = sc->conf->pin_fixup[i].mask; *bit = sc->conf->pin_fixup[i].bit; return; } } static int rk_pinctrl_handle_io(struct rk_pinctrl_softc *sc, phandle_t node, uint32_t bank, uint32_t pin) { bool have_cfg, have_direction, have_value; uint32_t direction_value, pin_value; struct rk_pinctrl_gpio *gpio; int i, rv; have_cfg = false; have_direction = false; have_value = false; /* Get (subset of) GPIO pin properties. */ if (OF_hasprop(node, "output-disable")) { have_cfg = true; have_direction = true; direction_value = GPIO_PIN_INPUT; } if (OF_hasprop(node, "output-enable")) { have_cfg = true; have_direction = true; direction_value = GPIO_PIN_OUTPUT; } if (OF_hasprop(node, "output-low")) { have_cfg = true; have_direction = true; direction_value = GPIO_PIN_OUTPUT; have_value = true; pin_value = 0; } if (OF_hasprop(node, "output-high")) { have_cfg = true; have_direction = true; direction_value = GPIO_PIN_OUTPUT; have_value = true; pin_value = 1; } if (!have_cfg) return (0); /* Find gpio */ gpio = NULL; for(i = 0; i < sc->conf->ngpio_bank; i++) { if (bank == sc->conf->gpio_bank[i].bank) { gpio = sc->conf->gpio_bank + i; break; } } if (gpio == NULL) { device_printf(sc->dev, "Cannot find GPIO bank %d\n", bank); return (ENXIO); } if (gpio->gpio_dev == NULL) { device_printf(sc->dev, "No GPIO subdevice found for bank %d\n", bank); return (ENXIO); } rv = 0; if (have_value) { rv = GPIO_PIN_SET(gpio->gpio_dev, pin, pin_value); if (rv != 0) { device_printf(sc->dev, "Cannot set GPIO value: %d\n", rv); return (rv); } } if (have_direction) { rv = GPIO_PIN_SETFLAGS(gpio->gpio_dev, pin, direction_value); if (rv != 0) { device_printf(sc->dev, "Cannot set GPIO direction: %d\n", rv); return (rv); } } return (0); } static void rk_pinctrl_configure_pin(struct rk_pinctrl_softc *sc, uint32_t *pindata) { phandle_t pin_conf; struct syscon *syscon; uint32_t bank, subbank, pin, function, bias; uint32_t bit, mask, reg, drive; int i, rv; bank = pindata[0]; pin = pindata[1]; function = pindata[2]; pin_conf = OF_node_from_xref(pindata[3]); subbank = pin / 8; for (i = 0; i < sc->conf->iomux_nbanks; i++) if (sc->conf->iomux_conf[i].bank == bank && sc->conf->iomux_conf[i].subbank == subbank) break; if (i == sc->conf->iomux_nbanks) { device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin, bank); return; } /* Find syscon */ syscon = sc->conf->get_syscon(sc, bank); /* Setup GPIO properties first */ rv = rk_pinctrl_handle_io(sc, pin_conf, bank, pin); /* Then pin pull-up/down */ bias = sc->conf->parse_bias(pin_conf, bank); if (bias >= 0) { reg = sc->conf->get_pd_offset(sc, bank); reg += bank * 0x10 + ((pin / 8) * 0x4); bit = (pin % 8) * 2; mask = (0x3 << bit); SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16)); } /* Then drive strength */ if (ofw_bus_node_is_compatible(ofw_bus_get_node(sc->dev), "rockchip,rk3568-pinctrl")) { uint32_t value; if (OF_getencprop(pin_conf, "drive-strength", &value, sizeof(value)) == 0) { if (bank) reg = 0x01c0 + (bank * 0x40) + (pin / 2 * 4); else reg = 0x0070 + (pin / 2 * 4); drive = ((1 << (value + 1)) - 1) << (pin % 2); mask = 0x3f << (pin % 2);; SYSCON_WRITE_4(syscon, reg, drive | (mask << 16)); } } else { rv = rk_pinctrl_parse_drive(sc, pin_conf, bank, subbank, &drive, ®); if (rv == 0) { bit = (pin % 8) * 2; mask = (0x3 << bit); SYSCON_MODIFY_4(syscon, reg, mask, drive << bit | (mask << 16)); } } /* Finally set the pin function */ reg = sc->conf->iomux_conf[i].offset; switch (sc->conf->iomux_conf[i].nbits) { case 4: if ((pin % 8) >= 4) reg += 0x4; bit = (pin % 4) * 4; mask = (0xF << bit); break; case 3: if ((pin % 8) >= 5) reg += 4; bit = (pin % 8 % 5) * 3; mask = (0x7 << bit); break; case 2: bit = (pin % 8) * 2; mask = (0x3 << bit); break; default: device_printf(sc->dev, "Unknown pin stride width %d in bank %d\n", sc->conf->iomux_conf[i].nbits, bank); return; } rk_pinctrl_get_fixup(sc, bank, pin, ®, &mask, &bit); /* * NOTE: not all syscon registers uses hi-word write mask, thus * register modify method should be used. * XXXX We should not pass write mask to syscon register * without hi-word write mask. */ SYSCON_MODIFY_4(syscon, reg, mask, function << bit | (mask << 16)); } static int rk_pinctrl_configure_pins(device_t dev, phandle_t cfgxref) { struct rk_pinctrl_softc *sc; phandle_t node; uint32_t *pins; int i, npins; sc = device_get_softc(dev); node = OF_node_from_xref(cfgxref); npins = OF_getencprop_alloc_multi(node, "rockchip,pins", sizeof(*pins), (void **)&pins); if (npins <= 0) return (ENOENT); for (i = 0; i != npins; i += 4) rk_pinctrl_configure_pin(sc, pins + i); return (0); } static int rk_pinctrl_is_gpio_locked(struct rk_pinctrl_softc *sc, struct syscon *syscon, int bank, uint32_t pin, bool *is_gpio) { uint32_t subbank, bit, mask, reg; uint32_t pinfunc; int i; RK_PINCTRL_LOCK_ASSERT(sc); subbank = pin / 8; *is_gpio = false; for (i = 0; i < sc->conf->iomux_nbanks; i++) if (sc->conf->iomux_conf[i].bank == bank && sc->conf->iomux_conf[i].subbank == subbank) break; if (i == sc->conf->iomux_nbanks) { device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin, bank); return (EINVAL); } syscon = sc->conf->get_syscon(sc, bank); /* Parse pin function */ reg = sc->conf->iomux_conf[i].offset; switch (sc->conf->iomux_conf[i].nbits) { case 4: if ((pin % 8) >= 4) reg += 0x4; bit = (pin % 4) * 4; mask = (0xF << bit); break; case 3: if ((pin % 8) >= 5) reg += 4; bit = (pin % 8 % 5) * 3; mask = (0x7 << bit); break; case 2: bit = (pin % 8) * 2; mask = (0x3 << bit); break; default: device_printf(sc->dev, "Unknown pin stride width %d in bank %d\n", sc->conf->iomux_conf[i].nbits, bank); return (EINVAL); } rk_pinctrl_get_fixup(sc, bank, pin, ®, &mask, &bit); reg = SYSCON_READ_4(syscon, reg); pinfunc = (reg & mask) >> bit; /* Test if the pin is in gpio mode */ if (pinfunc == 0) *is_gpio = true; return (0); } static int rk_pinctrl_get_bank(struct rk_pinctrl_softc *sc, device_t gpio, int *bank) { int i; for (i = 0; i < sc->conf->ngpio_bank; i++) { if (sc->conf->gpio_bank[i].gpio_dev == gpio) break; } if (i == sc->conf->ngpio_bank) return (EINVAL); *bank = i; return (0); } static int rk_pinctrl_is_gpio(device_t pinctrl, device_t gpio, uint32_t pin, bool *is_gpio) { struct rk_pinctrl_softc *sc; struct syscon *syscon; int bank; int rv; sc = device_get_softc(pinctrl); RK_PINCTRL_LOCK(sc); rv = rk_pinctrl_get_bank(sc, gpio, &bank); if (rv != 0) goto done; syscon = sc->conf->get_syscon(sc, bank); rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, is_gpio); done: RK_PINCTRL_UNLOCK(sc); return (rv); } static int rk_pinctrl_get_flags(device_t pinctrl, device_t gpio, uint32_t pin, uint32_t *flags) { struct rk_pinctrl_softc *sc; struct syscon *syscon; uint32_t reg, bit; uint32_t bias; int bank; int rv = 0; bool is_gpio; sc = device_get_softc(pinctrl); RK_PINCTRL_LOCK(sc); rv = rk_pinctrl_get_bank(sc, gpio, &bank); if (rv != 0) goto done; syscon = sc->conf->get_syscon(sc, bank); rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio); if (rv != 0) goto done; if (!is_gpio) { rv = EINVAL; goto done; } /* Get the pullup/pulldown configuration */ reg = sc->conf->get_pd_offset(sc, bank); reg += bank * 0x10 + ((pin / 8) * 0x4); bit = (pin % 8) * 2; reg = SYSCON_READ_4(syscon, reg); reg = (reg >> bit) & 0x3; bias = sc->conf->resolv_bias_value(bank, reg); *flags = bias; done: RK_PINCTRL_UNLOCK(sc); return (rv); } static int rk_pinctrl_set_flags(device_t pinctrl, device_t gpio, uint32_t pin, uint32_t flags) { struct rk_pinctrl_softc *sc; struct syscon *syscon; uint32_t bit, mask, reg; uint32_t bias; int bank; int rv = 0; bool is_gpio; sc = device_get_softc(pinctrl); RK_PINCTRL_LOCK(sc); rv = rk_pinctrl_get_bank(sc, gpio, &bank); if (rv != 0) goto done; syscon = sc->conf->get_syscon(sc, bank); rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio); if (rv != 0) goto done; if (!is_gpio) { rv = EINVAL; goto done; } /* Get the pullup/pulldown configuration */ reg = sc->conf->get_pd_offset(sc, bank); reg += bank * 0x10 + ((pin / 8) * 0x4); bit = (pin % 8) * 2; mask = (0x3 << bit); bias = sc->conf->get_bias_value(bank, flags); SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16)); done: RK_PINCTRL_UNLOCK(sc); return (rv); } -static int -rk_pinctrl_register_gpio(struct rk_pinctrl_softc *sc, char *gpio_name, - device_t gpio_dev) -{ - int i; - - for(i = 0; i < sc->conf->ngpio_bank; i++) { - if (strcmp(gpio_name, sc->conf->gpio_bank[i].gpio_name) != 0) - continue; - sc->conf->gpio_bank[i].gpio_dev = gpio_dev; - return(0); - } - return (ENXIO); -} - static int rk_pinctrl_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) return (ENXIO); device_set_desc(dev, "RockChip Pinctrl controller"); return (BUS_PROBE_DEFAULT); } static int rk_pinctrl_attach(device_t dev) { struct rk_pinctrl_softc *sc; phandle_t node; device_t cdev; - char *gpio_name, *eptr; - int rv; + int rv, gpio_unit; sc = device_get_softc(dev); sc->dev = dev; node = ofw_bus_get_node(dev); if (OF_hasprop(node, "rockchip,grf") && syscon_get_by_ofw_property(dev, node, "rockchip,grf", &sc->grf) != 0) { device_printf(dev, "cannot get grf driver handle\n"); return (ENXIO); } /* RK3568,RK3399,RK3288 have banks in PMU. RK3328 doesn't have a PMU. */ if (ofw_bus_node_is_compatible(node, "rockchip,rk3568-pinctrl") || ofw_bus_node_is_compatible(node, "rockchip,rk3399-pinctrl") || ofw_bus_node_is_compatible(node, "rockchip,rk3288-pinctrl")) { if (OF_hasprop(node, "rockchip,pmu") && syscon_get_by_ofw_property(dev, node, "rockchip,pmu", &sc->pmu) != 0) { device_printf(dev, "cannot get pmu driver handle\n"); return (ENXIO); } } mtx_init(&sc->mtx, "rk pinctrl", "pinctrl", MTX_SPIN); sc->conf = (struct rk_pinctrl_conf *)ofw_bus_search_compatible(dev, compat_data)->ocd_data; fdt_pinctrl_register(dev, "rockchip,pins"); simplebus_init(dev, node); bus_generic_probe(dev); /* Attach child devices */ - for (node = OF_child(node); node > 0; node = OF_peer(node)) { + for (node = OF_child(node), gpio_unit = 0; node > 0; + node = OF_peer(node)) { if (!ofw_bus_node_is_compatible(node, "rockchip,gpio-bank")) continue; - - rv = OF_getprop_alloc(node, "name", (void **)&gpio_name); - if (rv <= 0) { - device_printf(sc->dev, "Cannot GPIO subdevice name.\n"); - continue; - } - cdev = simplebus_add_device(dev, node, 0, NULL, -1, NULL); if (cdev == NULL) { - device_printf(dev, " Cannot add GPIO subdevice: %s\n", - gpio_name); - OF_prop_free(gpio_name); + device_printf(dev, " Cannot add GPIO subdevice\n"); + gpio_unit += 1; continue; } - rv = device_probe_and_attach(cdev); if (rv != 0) { device_printf(sc->dev, - "Cannot attach GPIO subdevice: %s\n", gpio_name); - OF_prop_free(gpio_name); - continue; - } - - /* Grep device name from name property */ - eptr = gpio_name; - strsep(&eptr, "@"); - if (gpio_name == eptr) { - device_printf(sc->dev, - "Unrecognized format of GPIO subdevice name: %s\n", - gpio_name); - OF_prop_free(gpio_name); - continue; - } - rv = rk_pinctrl_register_gpio(sc, gpio_name, cdev); - if (rv != 0) { - device_printf(sc->dev, - "Cannot register GPIO subdevice %s: %d\n", - gpio_name, rv); - OF_prop_free(gpio_name); + "Cannot attach GPIO subdevice\n"); + gpio_unit += 1; continue; } - OF_prop_free(gpio_name); + sc->conf->gpio_bank[gpio_unit].gpio_dev = cdev; + gpio_unit += 1; } fdt_pinctrl_configure_tree(dev); return (bus_generic_attach(dev)); } static int rk_pinctrl_detach(device_t dev) { return (EBUSY); } static device_method_t rk_pinctrl_methods[] = { /* Device interface */ DEVMETHOD(device_probe, rk_pinctrl_probe), DEVMETHOD(device_attach, rk_pinctrl_attach), DEVMETHOD(device_detach, rk_pinctrl_detach), /* fdt_pinctrl interface */ DEVMETHOD(fdt_pinctrl_configure, rk_pinctrl_configure_pins), DEVMETHOD(fdt_pinctrl_is_gpio, rk_pinctrl_is_gpio), DEVMETHOD(fdt_pinctrl_get_flags, rk_pinctrl_get_flags), DEVMETHOD(fdt_pinctrl_set_flags, rk_pinctrl_set_flags), DEVMETHOD_END }; DEFINE_CLASS_1(rk_pinctrl, rk_pinctrl_driver, rk_pinctrl_methods, sizeof(struct rk_pinctrl_softc), simplebus_driver); EARLY_DRIVER_MODULE(rk_pinctrl, simplebus, rk_pinctrl_driver, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_MIDDLE); MODULE_VERSION(rk_pinctrl, 1);