diff --git a/sys/powerpc/conf/GENERIC b/sys/powerpc/conf/GENERIC index 4897cfb6ae6c..77c88cf05f78 100644 --- a/sys/powerpc/conf/GENERIC +++ b/sys/powerpc/conf/GENERIC @@ -1,247 +1,247 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/powerpc # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu AIM ident GENERIC machine powerpc powerpc -makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Platform support -options POWERMAC #NewWorld Apple PowerMacs -options PSIM #GDB PSIM ppc simulator -options MAMBO #IBM Mambo Full System Simulator -options PSERIES #PAPR-compliant systems +options POWERMAC # NewWorld Apple PowerMacs +options PSIM # GDB PSIM ppc simulator +options MAMBO # IBM Mambo Full System Simulator +options PSERIES # PAPR-compliant systems options FDT -options SCHED_ULE #ULE scheduler -options PREEMPTION #Enable kernel thread preemption +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET -options INET #InterNETworking -options INET6 #IPv6 communications protocols +options INET # InterNETworking +options INET6 # IPv6 communications protocols options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options TCP_HHOOK # hhook(9) framework for TCP options TCP_RFC7413 # TCP Fast Open options SCTP_SUPPORT # Allow kldload of SCTP -options FFS #Berkeley Fast Filesystem -options SOFTUPDATES #Enable FFS soft updates support -options UFS_ACL #Support for access control lists -options UFS_DIRHASH #Improve performance on big directories -options UFS_GJOURNAL #Enable gjournal-based UFS journaling -options QUOTA #Enable disk quotas for UFS -options MD_ROOT #MD is a potential root device -options NFSCL #Network Filesystem Client -options NFSD #Network Filesystem Server -options NFSLOCKD #Network Lock Manager -options NFS_ROOT #NFS usable as root device -options MSDOSFS #MSDOS Filesystem -options CD9660 #ISO 9660 Filesystem -options PROCFS #Process filesystem (requires PSEUDOFS) -options PSEUDOFS #Pseudo-filesystem framework -options TMPFS #Efficient memory filesystem -options GEOM_PART_APM #Apple Partition Maps. -options GEOM_PART_GPT #GUID Partition Tables. -options GEOM_LABEL #Provides labelization -options COMPAT_FREEBSD4 #Keep this for a while -options COMPAT_FREEBSD5 #Compatible with FreeBSD5 -options COMPAT_FREEBSD6 #Compatible with FreeBSD6 -options COMPAT_FREEBSD7 #Compatible with FreeBSD7 +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options MD_ROOT # MD is a potential root device +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as root device +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_APM # Apple Partition Maps. +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options COMPAT_FREEBSD4 # Keep this for a while +options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +options COMPAT_FREEBSD6 # Compatible with FreeBSD6 +options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options COMPAT_FREEBSD12 # Compatible with FreeBSD12 options COMPAT_FREEBSD13 # Compatible with FreeBSD13 -options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI -options KTRACE #ktrace(1) syscall trace support -options STACK #stack(9) support -options SYSVSHM #SYSV-style shared memory -options SYSVMSG #SYSV-style message queues -options SYSVSEM #SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) syscall trace support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): -options DDB #Support DDB -#options DEADLKRES #Enable the deadlock resolver -options INVARIANTS #Enable calls of extra sanity checking -options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS -options WITNESS #Enable checks to detect deadlocks and cycles -options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed +options DDB # Support DDB +#options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options DEBUGNET # debugnet networking options NETDUMP # netdump(4) client support # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # CPU frequency control device cpufreq # Standard busses device pci options PCI_HP # PCI-Express native HotPlug device agp # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O device isp # Qlogic family device ispfw # Firmware module for Qlogic host adapters device mpt # LSI-Logic MPT-Fusion device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # vt is the default console driver, resembling an SCO console device vt # Generic console driver (pulls in OF FB) device kbdmux # Serial (COM) ports device scc device uart device uart_z8530 # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device bge # Broadcom BCM570xx Gigabit Ethernet device gem # Sun GEM/Sun ERI/Apple GMAC device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices. device crypto # core crypto support device loop # Network loopback device ether # Ethernet support device vlan # 802.1Q VLAN support device tuntap # Packet tunnel. device md # Memory "disks" device ofwd # Open Firmware disks device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. -device bpf #Berkeley packet filter +device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface device usb # USB Bus (required) device uhid # "Human Interface Devices" device ukbd # Keyboard options KBD_INSTALL_CDEV # install a CDEV entry in /dev device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da0 device ums # Mouse device atp # Apple USB touchpad device urio # Diamond Rio 500 MP3 player # USB Ethernet device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet # Wireless NIC cards options IEEE80211_SUPPORT_MESH # Misc device iicbus # I2C bus code device kiic # Keywest I2C device ad7417 # PowerMac7,2 temperature sensor device adt746x # PowerBook5,8 temperature sensor device ds1631 # PowerMac11,2 temperature sensor device ds1775 # PowerMac7,2 temperature sensor device fcu # Apple Fan Control Unit device max6690 # PowerMac7,2 temperature sensor device powermac_nvram # Open Firmware configuration NVRAM device smu # Apple System Management Unit device adm1030 # Apple G4 MDD fan controller device atibl # ATI-based backlight driver for PowerBooks/iBooks device nvbl # nVidia-based backlight driver for PowerBooks/iBooks device pswitch # Macio programmer's switch # ADB support device adb device cuda device pmu # Sound support device sound # Generic sound driver (required) device snd_ai2s # Apple I2S audio device snd_davbus # Apple DAVBUS audio device snd_uaudio # USB Audio # evdev interface options EVDEV_SUPPORT # evdev support in legacy drivers device evdev # input event device support device uinput # install /dev/uinput cdev # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support diff --git a/sys/powerpc/conf/GENERIC64 b/sys/powerpc/conf/GENERIC64 index c6c8fc2eb00c..17fa9684d27c 100644 --- a/sys/powerpc/conf/GENERIC64 +++ b/sys/powerpc/conf/GENERIC64 @@ -1,278 +1,278 @@ # -# GENERIC -- Generic kernel configuration file for FreeBSD/powerpc +# GENERIC64 -- Generic kernel configuration file for FreeBSD/powerpc64 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu AIM ident GENERIC machine powerpc powerpc64 -makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Platform support -options POWERMAC #NewWorld Apple PowerMacs -options PS3 #Sony Playstation 3 -options MAMBO #IBM Mambo Full System Simulator -options QEMU #QEMU processor emulator -options PSERIES #PAPR-compliant systems (e.g. IBM p) -options POWERNV #Non-virtualized OpenPOWER systems +options POWERMAC # NewWorld Apple PowerMacs +options PS3 # Sony Playstation 3 +options MAMBO # IBM Mambo Full System Simulator +options QEMU # QEMU processor emulator +options PSERIES # PAPR-compliant systems (e.g. IBM p) +options POWERNV # Non-virtualized OpenPOWER systems -options FDT #Flattened Device Tree -options SCHED_ULE #ULE scheduler -options NUMA #Non-Uniform Memory Architecture support -options PREEMPTION #Enable kernel thread preemption +options FDT # Flattened Device Tree +options SCHED_ULE # ULE scheduler +options NUMA # Non-Uniform Memory Architecture support +options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET -options INET #InterNETworking -options INET6 #IPv6 communications protocols +options INET # InterNETworking +options INET6 # IPv6 communications protocols options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options ROUTE_MPATH # Multipath routing support options TCP_OFFLOAD # TCP offload options TCP_BLACKBOX # Enhanced TCP event logging options TCP_HHOOK # hhook(9) framework for TCP options TCP_RFC7413 # TCP Fast Open options SCTP_SUPPORT # Allow kldload of SCTP -options FFS #Berkeley Fast Filesystem -options SOFTUPDATES #Enable FFS soft updates support -options UFS_ACL #Support for access control lists -options UFS_DIRHASH #Improve performance on big directories -options UFS_GJOURNAL #Enable gjournal-based UFS journaling -options QUOTA #Enable disk quotas for UFS -options MD_ROOT #MD is a potential root device -options MD_ROOT_MEM #Enable use of initrd as MD root -options NFSCL #Network Filesystem Client -options NFSD #Network Filesystem Server -options NFSLOCKD #Network Lock Manager -options NFS_ROOT #NFS usable as root device -options MSDOSFS #MSDOS Filesystem -options CD9660 #ISO 9660 Filesystem -options PROCFS #Process filesystem (requires PSEUDOFS) -options PSEUDOFS #Pseudo-filesystem framework -options TMPFS #Efficient memory filesystem -options GEOM_PART_APM #Apple Partition Maps. -options GEOM_PART_GPT #GUID Partition Tables. -options GEOM_LABEL #Provides labelization -options COMPAT_FREEBSD32 #Compatible with FreeBSD/powerpc binaries -options COMPAT_FREEBSD5 #Compatible with FreeBSD5 -options COMPAT_FREEBSD6 #Compatible with FreeBSD6 -options COMPAT_FREEBSD7 #Compatible with FreeBSD7 +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options MD_ROOT # MD is a potential root device +options MD_ROOT_MEM # Enable use of initrd as MD root +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as root device +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_APM # Apple Partition Maps. +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options COMPAT_FREEBSD32 # Compatible with FreeBSD/powerpc binaries +options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +options COMPAT_FREEBSD6 # Compatible with FreeBSD6 +options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options COMPAT_FREEBSD12 # Compatible with FreeBSD12 options COMPAT_FREEBSD13 # Compatible with FreeBSD13 -options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI -options KTRACE #ktrace(1) syscall trace support -options STACK #stack(9) support -options SYSVSHM #SYSV-style shared memory -options SYSVMSG #SYSV-style message queues -options SYSVSEM #SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) syscall trace support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): -options DDB #Support DDB -#options DEADLKRES #Enable the deadlock resolver -options INVARIANTS #Enable calls of extra sanity checking -options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS -options WITNESS #Enable checks to detect deadlocks and cycles -options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed +options DDB # Support DDB +#options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options DEBUGNET # debugnet networking options NETDUMP # netdump(4) client support # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # CPU frequency control device cpufreq # Standard busses device pci options PCI_HP # PCI-Express native HotPlug device agp # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # NVM Express (NVMe) support device nvme # base NVMe driver options NVME_USE_NVD=0 # prefer the cam(4) based nda(4) driver device nvd # expose NVMe namespaces as disks, depends on nvme # SCSI Controllers device aacraid # Adaptec by PMC RAID device ahc # AHA2940 and onboard AIC7xxx devices options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O device isp # Qlogic family device ispfw # Firmware module for Qlogic host adapters device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI SAS3008 MPT-Fusion SAS-3 device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Service (SES and SAF-TE) # vt is the default console driver, resembling an SCO console device vt # Core console driver device kbdmux # Serial (COM) ports device scc device uart device uart_z8530 device iflib # Ethernet hardware device em # Intel PRO/1000 Gigabit Ethernet Family device ix # Intel PRO/10GbE PCIE PF Ethernet Family device ixl # Intel 700 Series Physical Function device ixv # Intel PRO/10GbE PCIE VF Ethernet Family device glc # Sony Playstation 3 Ethernet device llan # IBM pSeries Virtual Ethernet device cxgbe # Chelsio 10/25G NIC # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device bge # Broadcom BCM570xx Gigabit Ethernet device gem # Sun GEM/Sun ERI/Apple GMAC device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 # Pseudo devices. device crypto # core crypto support device loop # Network loopback device ether # Ethernet support device vlan # 802.1Q VLAN support device tuntap # Packet tunnel. device md # Memory "disks" device ofwd # Open Firmware disks device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. -device bpf #Berkeley packet filter +device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface device xhci # XHCI PCI->USB interface device usb # USB Bus (required) device uhid # "Human Interface Devices" device ukbd # Keyboard options KBD_INSTALL_CDEV # install a CDEV entry in /dev device umass # Disks/Mass storage - Requires scbus and da0 device ums # Mouse # USB Ethernet device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet # Wireless NIC cards options IEEE80211_SUPPORT_MESH # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) # Misc device iicbus # I2C bus code device iic device kiic # Keywest I2C device ad7417 # PowerMac7,2 temperature sensor device ds1631 # PowerMac11,2 temperature sensor device ds1775 # PowerMac7,2 temperature sensor device fcu # Apple Fan Control Unit device max6690 # PowerMac7,2 temperature sensor device powermac_nvram # Open Firmware configuration NVRAM device smu # Apple System Management Unit device atibl # ATI-based backlight driver for PowerBooks/iBooks device nvbl # nVidia-based backlight driver for PowerBooks/iBooks device opalflash # PowerNV embedded flash memory # ADB support device adb device pmu # Sound support device sound # Generic sound driver (required) device snd_ai2s # Apple I2S audio device snd_hda # Intel High Definition Audio device snd_uaudio # USB Audio # Netmap provides direct access to TX/RX rings on supported NICs device netmap # netmap(4) support # evdev interface options EVDEV_SUPPORT # evdev support in legacy drivers device evdev # input event device support device uinput # install /dev/uinput cdev # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support diff --git a/sys/powerpc/conf/GENERIC64LE b/sys/powerpc/conf/GENERIC64LE index 699ac9f16060..a84e8f622f49 100644 --- a/sys/powerpc/conf/GENERIC64LE +++ b/sys/powerpc/conf/GENERIC64LE @@ -1,254 +1,254 @@ # -# GENERIC -- Generic kernel configuration file for FreeBSD/powerpc +# GENERIC64LE -- Generic kernel configuration file for FreeBSD/powerpc64le # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu AIM ident GENERIC machine powerpc powerpc64le -makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Platform support -options MAMBO #IBM Mambo Full System Simulator -options QEMU #QEMU processor emulator -options PSERIES #PAPR-compliant systems (e.g. IBM p) -options POWERNV #Non-virtualized OpenPOWER systems - -options FDT #Flattened Device Tree -options SCHED_ULE #ULE scheduler -options NUMA #Non-Uniform Memory Architecture support -options PREEMPTION #Enable kernel thread preemption +options MAMBO # IBM Mambo Full System Simulator +options QEMU # QEMU processor emulator +options PSERIES # PAPR-compliant systems (e.g. IBM p) +options POWERNV # Non-virtualized OpenPOWER systems + +options FDT # Flattened Device Tree +options SCHED_ULE # ULE scheduler +options NUMA # Non-Uniform Memory Architecture support +options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET -options INET #InterNETworking -options INET6 #IPv6 communications protocols +options INET # InterNETworking +options INET6 # IPv6 communications protocols options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options TCP_OFFLOAD # TCP offload options TCP_BLACKBOX # Enhanced TCP event logging options TCP_HHOOK # hhook(9) framework for TCP options TCP_RFC7413 # TCP Fast Open options SCTP_SUPPORT # Allow kldload of SCTP -options FFS #Berkeley Fast Filesystem -options SOFTUPDATES #Enable FFS soft updates support -options UFS_ACL #Support for access control lists -options UFS_DIRHASH #Improve performance on big directories -options UFS_GJOURNAL #Enable gjournal-based UFS journaling -options QUOTA #Enable disk quotas for UFS -options MD_ROOT #MD is a potential root device -options MD_ROOT_MEM #Enable use of initrd as MD root -options NFSCL #Network Filesystem Client -options NFSD #Network Filesystem Server -options NFSLOCKD #Network Lock Manager -options NFS_ROOT #NFS usable as root device -options MSDOSFS #MSDOS Filesystem -options CD9660 #ISO 9660 Filesystem -options PROCFS #Process filesystem (requires PSEUDOFS) -options PSEUDOFS #Pseudo-filesystem framework -options TMPFS #Efficient memory filesystem -options GEOM_PART_APM #Apple Partition Maps. -options GEOM_PART_GPT #GUID Partition Tables. -options GEOM_LABEL #Provides labelization -#options COMPAT_FREEBSD32 #Compatible with FreeBSD/powerpcle binaries +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options MD_ROOT # MD is a potential root device +options MD_ROOT_MEM # Enable use of initrd as MD root +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as root device +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_APM # Apple Partition Maps. +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +#options COMPAT_FREEBSD32 # Compatible with FreeBSD/powerpcle binaries options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options COMPAT_FREEBSD12 # Compatible with FreeBSD12 options COMPAT_FREEBSD13 # Compatible with FreeBSD13 -options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI -options KTRACE #ktrace(1) syscall trace support -options STACK #stack(9) support -options SYSVSHM #SYSV-style shared memory -options SYSVMSG #SYSV-style message queues -options SYSVSEM #SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) syscall trace support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): -options DDB #Support DDB -#options DEADLKRES #Enable the deadlock resolver -options INVARIANTS #Enable calls of extra sanity checking -options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS -options WITNESS #Enable checks to detect deadlocks and cycles -options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed +options DDB # Support DDB +#options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options DEBUGNET # debugnet networking options NETDUMP # netdump(4) client support # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # CPU frequency control device cpufreq # Standard busses device pci options PCI_HP # PCI-Express native HotPlug device agp # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # NVM Express (NVMe) support device nvme # base NVMe driver options NVME_USE_NVD=0 # prefer the cam(4) based nda(4) driver device nvd # expose NVMe namespaces as disks, depends on nvme # SCSI Controllers device aacraid # Adaptec by PMC RAID device ahc # AHA2940 and onboard AIC7xxx devices options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O device isp # Qlogic family device ispfw # Firmware module for Qlogic host adapters device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI SAS3008 MPT-Fusion SAS-3 device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Service (SES and SAF-TE) # vt is the default console driver, resembling an SCO console device vt # Core console driver device kbdmux # Serial (COM) ports device scc device uart device uart_z8530 device iflib # Ethernet hardware device em # Intel PRO/1000 Gigabit Ethernet Family device ix # Intel PRO/10GbE PCIE PF Ethernet Family device ixl # Intel 700 Series Physical Function device ixv # Intel PRO/10GbE PCIE VF Ethernet Family device llan # IBM pSeries Virtual Ethernet device cxgbe # Chelsio 10/25G NIC # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device bge # Broadcom BCM570xx Gigabit Ethernet device gem # Sun GEM/Sun ERI/Apple GMAC device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 # Pseudo devices. device crypto # core crypto support device loop # Network loopback device ether # Ethernet support device vlan # 802.1Q VLAN support device tuntap # Packet tunnel. device md # Memory "disks" device ofwd # Open Firmware disks device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. -device bpf #Berkeley packet filter +device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface device xhci # XHCI PCI->USB interface device usb # USB Bus (required) device uhid # "Human Interface Devices" device ukbd # Keyboard options KBD_INSTALL_CDEV # install a CDEV entry in /dev device umass # Disks/Mass storage - Requires scbus and da0 device ums # Mouse # USB Ethernet device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet # Wireless NIC cards options IEEE80211_SUPPORT_MESH # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) # Misc device iicbus # I2C bus code device iic device opalflash # PowerNV embedded flash memory # Sound support device sound # Generic sound driver (required) device snd_hda # Intel High Definition Audio device snd_uaudio # USB Audio # Netmap provides direct access to TX/RX rings on supported NICs device netmap # netmap(4) support # evdev interface options EVDEV_SUPPORT # evdev support in legacy drivers device evdev # input event device support device uinput # install /dev/uinput cdev # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support diff --git a/sys/powerpc/conf/MPC85XXSPE b/sys/powerpc/conf/MPC85XXSPE index 6445112af1d7..1741055357a8 100644 --- a/sys/powerpc/conf/MPC85XXSPE +++ b/sys/powerpc/conf/MPC85XXSPE @@ -1,125 +1,125 @@ # # Custom kernel for Freescale MPC85XX development boards like the CDS etc. # # $FreeBSD$ # cpu BOOKE cpu BOOKE_E500 ident MPC85XXSPE machine powerpc powerpcspe include "dpaa/config.dpaa" -makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 options FPU_EMU options MAXCPU=2 options _KPOSIX_PRIORITY_SCHEDULING options ALT_BREAK_TO_DEBUGGER options BREAK_TO_DEBUGGER options BOOTP options BOOTP_NFSROOT #options BOOTP_NFSV3 options CD9660 options COMPAT_43 options DDB #options DEADLKRES options DEVICE_POLLING #options DIAGNOSTIC options FDT #makeoptions FDT_DTS_FILE=mpc8555cds.dts options FFS options GDB options GEOM_PART_GPT options INET options INET6 options TCP_HHOOK # hhook(9) framework for TCP options INVARIANTS options INVARIANT_SUPPORT options KDB options KTRACE options MD_ROOT options MPC85XX options MSDOSFS options NFS_ROOT options NFSCL options NFSLOCKD options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options PROCFS options PSEUDOFS options SCHED_ULE options CAPABILITIES options CAPABILITY_MODE options SMP options SYSVMSG options SYSVSEM options SYSVSHM options WITNESS options WITNESS_SKIPSPIN options COMPAT_FREEBSD10 options COMPAT_FREEBSD11 options COMPAT_FREEBSD12 options COMPAT_FREEBSD13 options HWPMC_HOOKS options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data device ata device bpf device cfi device cpufreq device crypto device cryptodev device da device ds1307 device ds1553 device iflib device em device alc device ether device fxp device gpio device gpiopower device iic device iicbus #device isa device loop device md device miibus device mmc device mmcsd device pass device pci device quicc #device rl device scbus device scc device sdhci device sec device spibus device spigen device tsec device dpaa device tuntap device uart options USB_DEBUG # enable debug msgs #device uhci device ehci device ukbd device ums device umass device usb device vlan # P1022 DIU device diu device videomode device vt device fbd # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support