diff --git a/sys/cam/cam_ccb.h b/sys/cam/cam_ccb.h index 67b5934e0c68..a45d62ab4152 100644 --- a/sys/cam/cam_ccb.h +++ b/sys/cam/cam_ccb.h @@ -1,836 +1,867 @@ /* * Data structures and definitions for CAM Control Blocks (CCBs). * * Copyright (c) 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * - * $Id: cam_ccb.h,v 1.4 1999/03/05 23:13:20 gibbs Exp $ + * $Id: cam_ccb.h,v 1.5 1999/05/06 20:15:57 ken Exp $ */ #ifndef _CAM_CAM_CCB_H #define _CAM_CAM_CCB_H 1 #include #include +#include #ifndef KERNEL #include #endif #include #include /* General allocation length definitions for CCB structures */ #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */ #define VUHBALEN 14 /* Vendor Unique HBA length */ #define SIM_IDLEN 16 /* ASCII string len for SIM ID */ #define HBA_IDLEN 16 /* ASCII string len for HBA ID */ #define DEV_IDLEN 16 /* ASCII string len for device names */ #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */ #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */ /* Struct definitions for CAM control blocks */ /* Common CCB header */ /* CAM CCB flags */ typedef enum { CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */ CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */ CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */ CAM_SCATTER_VALID = 0x00000010,/* Scatter/gather list is valid */ CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */ CAM_DIR_RESV = 0x00000000,/* Data direction (00:reserved) */ CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */ CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */ CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */ CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */ CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */ CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */ CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */ CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */ CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */ CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */ CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/ CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/ CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/ CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */ CAM_SG_LIST_PHYS = 0x00040000,/* SG list has physical addrs. */ CAM_MSG_BUF_PHYS = 0x00080000,/* Message buffer ptr is physical*/ CAM_SNS_BUF_PHYS = 0x00100000,/* Autosense data ptr is physical*/ CAM_DATA_PHYS = 0x00200000,/* SG/Buffer data ptrs are phys. */ CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */ CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */ /* Phase cognizant mode flags */ CAM_DIS_AUTOSRP = 0x01000000,/* Diable autosave/restore ptrs */ CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */ CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */ CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */ CAM_MSGB_VALID = 0x20000000,/* Message buffer valid */ CAM_STATUS_VALID = 0x40000000,/* Status buffer valid */ CAM_DATAB_VALID = 0x80000000,/* Data buffer valid */ /* Host target Mode flags */ CAM_TERM_IO = 0x20000000,/* Terminate I/O Message sup. */ CAM_DISCONNECT = 0x40000000,/* Disconnects are mandatory */ CAM_SEND_STATUS = 0x80000000,/* Send status after data phase */ } ccb_flags; /* XPT Opcodes for xpt_action */ typedef enum { /* Function code flags are bits greater than 0xff */ XPT_FC_QUEUED = 0x100, /* Non-immediate function code */ XPT_FC_USER_CCB = 0x200, XPT_FC_XPT_ONLY = 0x400, /* Only for the transport layer device */ /* Common function commands: 0x00->0x0F */ XPT_NOOP = 0x00, /* Execute Nothing */ XPT_SCSI_IO = 0x01 | XPT_FC_QUEUED, /* Execute the requested I/O operation */ XPT_GDEV_TYPE = 0x02, /* Get type information for specified device */ XPT_GDEVLIST = 0x03, /* Get a list of peripheral devices */ XPT_PATH_INQ = 0x04, /* Path routing inquiry */ XPT_REL_SIMQ = 0x05, /* Release a frozen SIM queue */ XPT_SASYNC_CB = 0x06, /* Set Asynchronous Callback Parameters */ XPT_SDEV_TYPE = 0x07, /* Set device type information */ XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* (Re)Scan the SCSI Bus */ XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY, /* Get EDT entries matching the given pattern */ XPT_DEBUG = 0x0a, /* Turn on debugging for a bus, target or lun */ + XPT_PATH_STATS = 0x0b, + /* Path statistics (error counts, etc.) */ + XPT_GDEV_STATS = 0x0c, + /* Device statistics (error counts, etc.) */ /* SCSI Control Functions: 0x10->0x1F */ XPT_ABORT = 0x10, /* Abort the specified CCB */ XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY, /* Reset the specified SCSI bus */ XPT_RESET_DEV = 0x12, /* Bus Device Reset the specified SCSI device */ XPT_TERM_IO = 0x13, /* Terminate the I/O process */ XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* Scan Logical Unit */ XPT_GET_TRAN_SETTINGS = 0x15, /* * Get default/user transfer settings * for the target */ XPT_SET_TRAN_SETTINGS = 0x16, /* * Set transfer rate/width * negotiation settings */ XPT_CALC_GEOMETRY = 0x17, /* * Calculate the geometry parameters for * a device give the sector size and * volume size. */ /* HBA engine commands 0x20->0x2F */ XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY, /* HBA engine feature inquiry */ XPT_ENG_EXEC = 0x21 | XPT_FC_QUEUED | XPT_FC_XPT_ONLY, /* HBA execute engine request */ /* Target mode commands: 0x30->0x3F */ XPT_EN_LUN = 0x30, /* Enable LUN as a target */ XPT_TARGET_IO = 0x31 | XPT_FC_QUEUED, /* Execute target I/O request */ XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Accept Host Target Mode CDB */ XPT_CONT_TARGET_IO = 0x33 | XPT_FC_QUEUED, /* Continue Host Target I/O Connection */ XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Notify Host Target driver of event */ XPT_NOTIFY_ACK = 0x35, /* Acknowledgement of event */ /* Vendor Unique codes: 0x80->0x8F */ XPT_VUNIQUE = 0x80 } xpt_opcode; #define XPT_FC_GROUP_MASK 0xF0 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK) #define XPT_FC_GROUP_COMMON 0x00 #define XPT_FC_GROUP_SCSI_CONTROL 0x10 #define XPT_FC_GROUP_HBA_ENGINE 0x20 #define XPT_FC_GROUP_TMODE 0x30 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80 typedef union { LIST_ENTRY(ccb_hdr) le; SLIST_ENTRY(ccb_hdr) sle; TAILQ_ENTRY(ccb_hdr) tqe; STAILQ_ENTRY(ccb_hdr) stqe; } camq_entry; typedef union { void *ptr; u_long field; u_int8_t bytes[sizeof(void *) > sizeof(u_long) ? sizeof(void *) : sizeof(u_long)]; } ccb_priv_entry; typedef union { ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE]; u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)]; } ccb_ppriv_area; typedef union { ccb_priv_entry entries[CCB_SIM_PRIV_SIZE]; u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)]; } ccb_spriv_area; struct ccb_hdr { cam_pinfo pinfo; /* Info for priority scheduling */ camq_entry xpt_links; /* For chaining in the XPT layer */ camq_entry sim_links; /* For chaining in the SIM layer */ camq_entry periph_links;/* For chaining in the type driver */ u_int32_t retry_count; /* Callback on completion function */ void (*cbfcnp)(struct cam_periph *, union ccb *); xpt_opcode func_code; /* XPT function code */ u_int32_t status; /* Status returned by CAM subsystem */ /* Compiled path for this ccb */ struct cam_path *path; path_id_t path_id; /* Path ID for the request */ target_id_t target_id; /* Target device ID */ lun_id_t target_lun; /* Target LUN number */ u_int32_t flags; ccb_ppriv_area periph_priv; ccb_spriv_area sim_priv; u_int32_t timeout; /* Timeout value */ /* Callout handle used for timeouts */ struct callout_handle timeout_ch; }; /* Get Device Information CCB */ struct ccb_getdev { struct ccb_hdr ccb_h; struct scsi_inquiry_data inq_data; u_int8_t serial_num[252]; u_int8_t serial_num_len; u_int8_t pd_type; /* returned peripheral device type */ +/* + * GARBAGE COLLECT + * Moved to ccb_getdevstats but left here for binary compatibility. + * Remove in next rev of CAM version. + */ int dev_openings; /* Space left for more work on device*/ int dev_active; /* Transactions running on the device */ int devq_openings;/* Space left for more queued work */ int devq_queued; /* Transactions queued to be sent */ int held; /* * CCBs held by peripheral drivers * for this device */ int maxtags; /* * Boundary conditions for number of * tagged operations */ int mintags; }; +/* Device Statistics CCB */ +struct ccb_getdevstats { + struct ccb_hdr ccb_h; + int dev_openings; /* Space left for more work on device*/ + int dev_active; /* Transactions running on the device */ + int devq_openings; /* Space left for more queued work */ + int devq_queued; /* Transactions queued to be sent */ + int held; /* + * CCBs held by peripheral drivers + * for this device + */ + struct timeval last_reset; /* Time of last bus reset/loop init */ +}; typedef enum { CAM_GDEVLIST_LAST_DEVICE, CAM_GDEVLIST_LIST_CHANGED, CAM_GDEVLIST_MORE_DEVS, CAM_GDEVLIST_ERROR } ccb_getdevlist_status_e; struct ccb_getdevlist { struct ccb_hdr ccb_h; char periph_name[DEV_IDLEN]; u_int32_t unit_number; unsigned int generation; u_int32_t index; ccb_getdevlist_status_e status; }; typedef enum { PERIPH_MATCH_NONE = 0x000, PERIPH_MATCH_PATH = 0x001, PERIPH_MATCH_TARGET = 0x002, PERIPH_MATCH_LUN = 0x004, PERIPH_MATCH_NAME = 0x008, PERIPH_MATCH_UNIT = 0x010, PERIPH_MATCH_ANY = 0x01f } periph_pattern_flags; struct periph_match_pattern { char periph_name[DEV_IDLEN]; u_int32_t unit_number; path_id_t path_id; target_id_t target_id; lun_id_t target_lun; periph_pattern_flags flags; }; typedef enum { DEV_MATCH_NONE = 0x000, DEV_MATCH_PATH = 0x001, DEV_MATCH_TARGET = 0x002, DEV_MATCH_LUN = 0x004, DEV_MATCH_INQUIRY = 0x008, DEV_MATCH_ANY = 0x00f } dev_pattern_flags; struct device_match_pattern { path_id_t path_id; target_id_t target_id; lun_id_t target_lun; struct scsi_static_inquiry_pattern inq_pat; dev_pattern_flags flags; }; typedef enum { BUS_MATCH_NONE = 0x000, BUS_MATCH_PATH = 0x001, BUS_MATCH_NAME = 0x002, BUS_MATCH_UNIT = 0x004, BUS_MATCH_BUS_ID = 0x008, BUS_MATCH_ANY = 0x00f } bus_pattern_flags; struct bus_match_pattern { path_id_t path_id; char dev_name[DEV_IDLEN]; u_int32_t unit_number; u_int32_t bus_id; bus_pattern_flags flags; }; union match_pattern { struct periph_match_pattern periph_pattern; struct device_match_pattern device_pattern; struct bus_match_pattern bus_pattern; }; typedef enum { DEV_MATCH_PERIPH, DEV_MATCH_DEVICE, DEV_MATCH_BUS } dev_match_type; struct dev_match_pattern { dev_match_type type; union match_pattern pattern; }; struct periph_match_result { char periph_name[DEV_IDLEN]; u_int32_t unit_number; path_id_t path_id; target_id_t target_id; lun_id_t target_lun; }; typedef enum { DEV_RESULT_NOFLAG = 0x00, DEV_RESULT_UNCONFIGURED = 0x01 } dev_result_flags; struct device_match_result { path_id_t path_id; target_id_t target_id; lun_id_t target_lun; struct scsi_inquiry_data inq_data; dev_result_flags flags; }; struct bus_match_result { path_id_t path_id; char dev_name[DEV_IDLEN]; u_int32_t unit_number; u_int32_t bus_id; }; union match_result { struct periph_match_result periph_result; struct device_match_result device_result; struct bus_match_result bus_result; }; struct dev_match_result { dev_match_type type; union match_result result; }; typedef enum { CAM_DEV_MATCH_LAST, CAM_DEV_MATCH_MORE, CAM_DEV_MATCH_LIST_CHANGED, CAM_DEV_MATCH_SIZE_ERROR, CAM_DEV_MATCH_ERROR } ccb_dev_match_status; typedef enum { CAM_DEV_POS_NONE = 0x000, CAM_DEV_POS_BUS = 0x001, CAM_DEV_POS_TARGET = 0x002, CAM_DEV_POS_DEVICE = 0x004, CAM_DEV_POS_PERIPH = 0x008, CAM_DEV_POS_PDPTR = 0x010, CAM_DEV_POS_TYPEMASK = 0xf00, CAM_DEV_POS_EDT = 0x100, CAM_DEV_POS_PDRV = 0x200 } dev_pos_type; struct ccb_dm_cookie { void *bus; void *target; void *device; void *periph; void *pdrv; }; struct ccb_dev_position { u_int generations[4]; #define CAM_BUS_GENERATION 0x00 #define CAM_TARGET_GENERATION 0x01 #define CAM_DEV_GENERATION 0x02 #define CAM_PERIPH_GENERATION 0x03 dev_pos_type position_type; struct ccb_dm_cookie cookie; }; struct ccb_dev_match { struct ccb_hdr ccb_h; ccb_dev_match_status status; u_int32_t num_patterns; u_int32_t pattern_buf_len; struct dev_match_pattern *patterns; u_int32_t num_matches; u_int32_t match_buf_len; struct dev_match_result *matches; struct ccb_dev_position pos; }; /* * Definitions for the path inquiry CCB fields. */ #define CAM_VERSION 0x11 /* Hex value for current version */ typedef enum { PI_MDP_ABLE = 0x80, /* Supports MDP message */ PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */ PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */ PI_SDTR_ABLE = 0x10, /* Supports SDTR message */ PI_LINKED_CDB = 0x08, /* Supports linked CDBs */ PI_TAG_ABLE = 0x02, /* Supports tag queue messages */ PI_SOFT_RST = 0x01, /* Supports soft reset alternative */ } pi_inqflag; typedef enum { PIT_PROCESSOR = 0x80, /* Target mode processor mode */ PIT_PHASE = 0x40, /* Target mode phase cog. mode */ PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */ PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */ PIT_GRP_6 = 0x08, /* Group 6 commands supported */ PIT_GRP_7 = 0x04, /* Group 7 commands supported */ } pi_tmflag; typedef enum { PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */ PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */ PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */ PIM_NOBUSRESET = 0x10, /* User has disabled initial BUS RESET */ } pi_miscflag; /* Path Inquiry CCB */ struct ccb_pathinq { struct ccb_hdr ccb_h; u_int8_t version_num; /* Version number for the SIM/HBA */ u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */ u_int8_t target_sprt; /* Flags for target mode support */ u_int8_t hba_misc; /* Misc HBA features */ u_int16_t hba_eng_cnt; /* HBA engine count */ /* Vendor Unique capabilities */ u_int8_t vuhba_flags[VUHBALEN]; u_int32_t max_target; /* Maximum supported Target */ u_int32_t max_lun; /* Maximum supported Lun */ u_int32_t async_flags; /* Installed Async handlers */ path_id_t hpath_id; /* Highest Path ID in the subsystem */ target_id_t initiator_id; /* ID of the HBA on the SCSI bus */ char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */ char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */ char dev_name[DEV_IDLEN];/* Device name for SIM */ u_int32_t unit_number; /* Unit number for SIM */ u_int32_t bus_id; /* Bus ID for SIM */ u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */ }; +/* Path Statistics CCB */ +struct ccb_pathstats { + struct ccb_hdr ccb_h; + struct timeval last_reset; /* Time of last bus reset/loop init */ +}; + typedef union { u_int8_t *sense_ptr; /* * Pointer to storage * for sense information */ /* Storage Area for sense information */ struct scsi_sense_data sense_buf; } sense_t; typedef union { u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */ /* Area for the CDB send */ u_int8_t cdb_bytes[IOCDBLEN]; } cdb_t; /* * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO * function codes. */ struct ccb_scsiio { struct ccb_hdr ccb_h; union ccb *next_ccb; /* Ptr for next CCB for action */ u_int8_t *req_map; /* Ptr to mapping info */ u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ u_int32_t dxfer_len; /* Data transfer length */ /* Autosense storage */ struct scsi_sense_data sense_data; u_int8_t sense_len; /* Number of bytes to autosense */ u_int8_t cdb_len; /* Number of bytes for the CDB */ u_int16_t sglist_cnt; /* Number of SG list entries */ u_int8_t scsi_status; /* Returned SCSI status */ u_int8_t sense_resid; /* Autosense resid length: 2's comp */ u_int32_t resid; /* Transfer residual length: 2's comp */ cdb_t cdb_io; /* Union for CDB bytes/pointer */ u_int8_t *msg_ptr; /* Pointer to the message buffer */ u_int16_t msg_len; /* Number of bytes for the Message */ u_int8_t tag_action; /* What to do for tag queueing */ /* * The tag action should be either the define below (to send a * non-tagged transaction) or one of the defined scsi tag messages * from scsi_message.h. */ #define CAM_TAG_ACTION_NONE 0x00 u_int8_t tag_id; /* tag id from initator (target mode) */ u_int8_t init_id; /* initiator id of who selected */ }; struct ccb_accept_tio { struct ccb_hdr ccb_h; cdb_t cdb_io; /* Union for CDB bytes/pointer */ u_int8_t cdb_len; /* Number of bytes for the CDB */ u_int8_t tag_action; /* What to do for tag queueing */ u_int8_t tag_id; /* tag id from initator (target mode) */ u_int8_t init_id; /* initiator id of who selected */ }; /* Release SIM Queue */ struct ccb_relsim { struct ccb_hdr ccb_h; u_int32_t release_flags; #define RELSIM_ADJUST_OPENINGS 0x01 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08 u_int32_t openings; u_int32_t release_timeout; u_int32_t qfrozen_cnt; }; /* * Definitions for the asynchronous callback CCB fields. */ typedef enum { AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */ AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */ AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */ AC_LOST_DEVICE = 0x100,/* A device went away */ AC_FOUND_DEVICE = 0x080,/* A new device was found */ AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */ AC_PATH_REGISTERED = 0x020,/* A new path has been registered */ AC_SENT_BDR = 0x010,/* A BDR message was sent to target */ AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */ AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */ AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */ } ac_code; typedef void ac_callback_t (void *softc, u_int32_t code, struct cam_path *path, void *args); /* Set Asynchronous Callback CCB */ struct ccb_setasync { struct ccb_hdr ccb_h; u_int32_t event_enable; /* Async Event enables */ ac_callback_t *callback; void *callback_arg; }; /* Set Device Type CCB */ struct ccb_setdev { struct ccb_hdr ccb_h; u_int8_t dev_type; /* Value for dev type field in EDT */ }; /* SCSI Control Functions */ /* Abort XPT request CCB */ struct ccb_abort { struct ccb_hdr ccb_h; union ccb *abort_ccb; /* Pointer to CCB to abort */ }; /* Reset SCSI Bus CCB */ struct ccb_resetbus { struct ccb_hdr ccb_h; }; /* Reset SCSI Device CCB */ struct ccb_resetdev { struct ccb_hdr ccb_h; }; /* Terminate I/O Process Request CCB */ struct ccb_termio { struct ccb_hdr ccb_h; union ccb *termio_ccb; /* Pointer to CCB to terminate */ }; /* Get/Set transfer rate/width/disconnection/tag queueing settings */ struct ccb_trans_settings { struct ccb_hdr ccb_h; u_int valid; /* Which fields to honor */ #define CCB_TRANS_SYNC_RATE_VALID 0x01 #define CCB_TRANS_SYNC_OFFSET_VALID 0x02 #define CCB_TRANS_BUS_WIDTH_VALID 0x04 #define CCB_TRANS_DISC_VALID 0x08 #define CCB_TRANS_TQ_VALID 0x10 u_int flags; #define CCB_TRANS_CURRENT_SETTINGS 0x01 #define CCB_TRANS_USER_SETTINGS 0x02 #define CCB_TRANS_DISC_ENB 0x04 #define CCB_TRANS_TAG_ENB 0x08 u_int sync_period; u_int sync_offset; u_int bus_width; }; /* * Calculate the geometry parameters for a device * give the block size and volume size in blocks. */ struct ccb_calc_geometry { struct ccb_hdr ccb_h; u_int32_t block_size; u_int32_t volume_size; u_int16_t cylinders; u_int8_t heads; u_int8_t secs_per_track; }; /* * Rescan the given bus, or bus/target/lun */ struct ccb_rescan { struct ccb_hdr ccb_h; cam_flags flags; }; /* * Turn on debugging for the given bus, bus/target, or bus/target/lun. */ struct ccb_debug { struct ccb_hdr ccb_h; cam_debug_flags flags; }; /* Target mode structures. */ struct ccb_en_lun { struct ccb_hdr ccb_h; u_int16_t grp6_len; /* Group 6 VU CDB length */ u_int16_t grp7_len; /* Group 7 VU CDB length */ u_int8_t enable; }; struct ccb_immed_notify { struct ccb_hdr ccb_h; struct scsi_sense_data sense_data; u_int8_t sense_len; /* Number of bytes in sese buffer */ u_int8_t initiator_id; /* Id of initiator that selected */ u_int16_t seq_id; /* Sequence Identifier */ u_int8_t message_code; /* Message Code */ u_int8_t message_args[7]; /* Message Arguments */ }; struct ccb_notify_ack { struct ccb_hdr ccb_h; u_int16_t seq_id; /* Sequence identifier */ u_int8_t event; /* Event flags */ }; /* HBA engine structures. */ typedef enum { EIT_BUFFER, /* Engine type: buffer memory */ EIT_LOSSLESS, /* Engine type: lossless compression */ EIT_LOSSY, /* Engine type: lossy compression */ EIT_ENCRYPT /* Engine type: encryption */ } ei_type; typedef enum { EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */ EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */ EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */ EAD_LZ2V2, /* Engine algorithm ID: LZ2 var.2 */ } ei_algo; struct ccb_eng_inq { struct ccb_hdr ccb_h; u_int16_t eng_num; /* The engine number for this inquiry */ ei_type eng_type; /* Returned engine type */ ei_algo eng_algo; /* Returned engine algorithm type */ u_int32_t eng_memeory; /* Returned engine memory size */ }; struct ccb_eng_exec { /* This structure must match SCSIIO size */ struct ccb_hdr ccb_h; u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */ u_int8_t *req_map; /* Ptr for mapping info on the req. */ u_int8_t *data_ptr; /* Pointer to the data buf/SG list */ u_int32_t dxfer_len; /* Data transfer length */ u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */ u_int16_t sglist_cnt; /* Num of scatter gather list entries */ u_int32_t dmax_len; /* Destination data maximum length */ u_int32_t dest_len; /* Destination data length */ int32_t src_resid; /* Source residual length: 2's comp */ u_int32_t timeout; /* Timeout value */ u_int16_t eng_num; /* Engine number for this request */ u_int16_t vu_flags; /* Vendor Unique flags */ }; /* * Definitions for the timeout field in the SCSI I/O CCB. */ #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */ #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */ #define CAM_SUCCESS 0 /* For signaling general success */ #define CAM_FAILURE 1 /* For signaling general failure */ #define CAM_FALSE 0 #define CAM_TRUE 1 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */ /* * Union of all CCB types for kernel space allocation. This union should * never be used for manipulating CCBs - its only use is for the allocation * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc * and the argument to xpt_ccb_free. */ union ccb { struct ccb_hdr ccb_h; /* For convenience */ struct ccb_scsiio csio; struct ccb_getdev cgd; struct ccb_getdevlist cgdl; struct ccb_pathinq cpi; struct ccb_relsim crs; struct ccb_setasync csa; struct ccb_setdev csd; + struct ccb_pathstats cpis; + struct ccb_getdevstats cgds; struct ccb_dev_match cdm; struct ccb_trans_settings cts; struct ccb_calc_geometry ccg; struct ccb_abort cab; struct ccb_resetbus crb; struct ccb_resetdev crd; struct ccb_termio tio; struct ccb_accept_tio atio; struct ccb_scsiio ctio; struct ccb_en_lun cel; struct ccb_immed_notify cin; struct ccb_notify_ack cna; struct ccb_eng_inq cei; struct ccb_eng_exec cee; struct ccb_rescan crcn; struct ccb_debug cdbg; }; __BEGIN_DECLS static __inline void cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int8_t tag_action, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int8_t cdb_len, u_int32_t timeout); static __inline void cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int tag_action, u_int tag_id, u_int init_id, u_int scsi_status, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout); static __inline void cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int8_t tag_action, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int8_t cdb_len, u_int32_t timeout) { csio->ccb_h.func_code = XPT_SCSI_IO; csio->ccb_h.flags = flags; csio->ccb_h.retry_count = retries; csio->ccb_h.cbfcnp = cbfcnp; csio->ccb_h.timeout = timeout; csio->data_ptr = data_ptr; csio->dxfer_len = dxfer_len; csio->sense_len = sense_len; csio->cdb_len = cdb_len; csio->tag_action = tag_action; } static __inline void cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int tag_action, u_int tag_id, u_int init_id, u_int scsi_status, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout) { csio->ccb_h.func_code = XPT_CONT_TARGET_IO; csio->ccb_h.flags = flags; csio->ccb_h.retry_count = retries; csio->ccb_h.cbfcnp = cbfcnp; csio->ccb_h.timeout = timeout; csio->data_ptr = data_ptr; csio->dxfer_len = dxfer_len; csio->scsi_status = scsi_status; csio->tag_action = tag_action; csio->tag_id = tag_id; csio->init_id = init_id; } __END_DECLS #endif /* _CAM_CAM_CCB_H */ diff --git a/sys/cam/cam_periph.c b/sys/cam/cam_periph.c index d365a125b873..f88373b8ec7b 100644 --- a/sys/cam/cam_periph.c +++ b/sys/cam/cam_periph.c @@ -1,1576 +1,1652 @@ /* * Common functions for CAM "type" (peripheral) drivers. * * Copyright (c) 1997, 1998 Justin T. Gibbs. * Copyright (c) 1997, 1998 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * - * $Id: cam_periph.c,v 1.12 1999/04/19 21:26:07 gibbs Exp $ + * $Id: cam_periph.c,v 1.13 1999/05/09 01:25:04 ken Exp $ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired); static u_int camperiphunit(struct periph_driver *p_drv, path_id_t path_id_t, target_id_t target, lun_id_t lun); static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb); static void camperiphfree(struct cam_periph *periph); cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *path, ac_callback_t *ac_callback, ac_code code, void *arg) { struct periph_driver **p_drv; struct cam_periph *periph; struct cam_periph *cur_periph; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; cam_status status; u_int init_level; int s; init_level = 0; /* * Handle Hot-Plug scenarios. If there is already a peripheral * of our type assigned to this path, we are likely waiting for * final close on an old, invalidated, peripheral. If this is * the case, queue up a deferred call to the peripheral's async * handler. If it looks like a mistaken re-alloation, complain. */ if ((periph = cam_periph_find(path, name)) != NULL) { if ((periph->flags & CAM_PERIPH_INVALID) != 0 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; periph->deferred_callback = ac_callback; periph->deferred_ac = code; return (CAM_REQ_INPROG); } else { printf("cam_periph_alloc: attempt to re-allocate " "valid device %s%d rejected\n", periph->periph_name, periph->unit_number); } return (CAM_REQ_INVALID); } periph = (struct cam_periph *)malloc(sizeof(*periph), M_DEVBUF, M_NOWAIT); if (periph == NULL) return (CAM_RESRC_UNAVAIL); init_level++; for (p_drv = (struct periph_driver **)periphdriver_set.ls_items; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, name) == 0) break; } path_id = xpt_path_path_id(path); target_id = xpt_path_target_id(path); lun_id = xpt_path_lun_id(path); bzero(periph, sizeof(*periph)); cam_init_pinfo(&periph->pinfo); periph->periph_start = periph_start; periph->periph_dtor = periph_dtor; periph->periph_oninval = periph_oninvalidate; periph->type = type; periph->periph_name = name; periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id); periph->immediate_priority = CAM_PRIORITY_NONE; periph->refcount = 0; SLIST_INIT(&periph->ccb_list); status = xpt_create_path(&path, periph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) goto failure; periph->path = path; init_level++; status = xpt_add_periph(periph); if (status != CAM_REQ_CMP) goto failure; s = splsoftcam(); cur_periph = TAILQ_FIRST(&(*p_drv)->units); while (cur_periph != NULL && cur_periph->unit_number < periph->unit_number) cur_periph = TAILQ_NEXT(cur_periph, unit_links); if (cur_periph != NULL) TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); else { TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); (*p_drv)->generation++; } splx(s); init_level++; status = periph_ctor(periph, arg); if (status == CAM_REQ_CMP) init_level++; failure: switch (init_level) { case 4: /* Initialized successfully */ break; case 3: s = splsoftcam(); TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); splx(s); xpt_remove_periph(periph); case 2: xpt_free_path(periph->path); case 1: free(periph, M_DEVBUF); case 0: /* No cleanup to perform. */ break; default: panic("cam_periph_alloc: Unkown init level"); } return(status); } /* * Find a peripheral structure with the specified path, target, lun, * and (optionally) type. If the name is NULL, this function will return * the first peripheral driver that matches the specified path. */ struct cam_periph * cam_periph_find(struct cam_path *path, char *name) { struct periph_driver **p_drv; struct cam_periph *periph; int s; for (p_drv = (struct periph_driver **)periphdriver_set.ls_items; *p_drv != NULL; p_drv++) { if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) continue; s = splsoftcam(); for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL; periph = TAILQ_NEXT(periph, unit_links)) { if (xpt_path_comp(periph->path, path) == 0) { splx(s); return(periph); } } splx(s); if (name != NULL) return(NULL); } return(NULL); } cam_status cam_periph_acquire(struct cam_periph *periph) { int s; if (periph == NULL) return(CAM_REQ_CMP_ERR); s = splsoftcam(); periph->refcount++; splx(s); return(CAM_REQ_CMP); } void cam_periph_release(struct cam_periph *periph) { int s; if (periph == NULL) return; s = splsoftcam(); if ((--periph->refcount == 0) && (periph->flags & CAM_PERIPH_INVALID)) { camperiphfree(periph); } splx(s); } /* * Look for the next unit number that is not currently in use for this * peripheral type starting at "newunit". Also exclude unit numbers that * are reserved by for future "hardwiring" unless we already know that this * is a potential wired device. Only assume that the device is "wired" the * first time through the loop since after that we'll be looking at unit * numbers that did not match a wiring entry. */ static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired) { struct cam_periph *periph; struct cam_periph_config *periph_conf; char *periph_name; int s; s = splsoftcam(); periph_name = p_drv->driver_name; for (;;newunit++) { for (periph = TAILQ_FIRST(&p_drv->units); periph != NULL && periph->unit_number != newunit; periph = TAILQ_NEXT(periph, unit_links)) ; if (periph != NULL && periph->unit_number == newunit) { if (wired != 0) { xpt_print_path(periph->path); printf("Duplicate Wired Device entry!\n"); xpt_print_path(periph->path); printf("Second device will not be wired\n"); wired = 0; } continue; } for (periph_conf = cam_pinit; wired == 0 && periph_conf->periph_name != NULL; periph_conf++) { /* * Don't match entries like "da 4" as a wired down * device, but do match entries like "da 4 target 5" * or even "da 4 scbus 1". */ if (IS_SPECIFIED(periph_conf->periph_unit) && (!strcmp(periph_name, periph_conf->periph_name)) && (IS_SPECIFIED(periph_conf->target) || IS_SPECIFIED(periph_conf->pathid)) && (newunit == periph_conf->periph_unit)) break; } if (wired != 0 || periph_conf->periph_name == NULL) break; } splx(s); return (newunit); } static u_int camperiphunit(struct periph_driver *p_drv, path_id_t pathid, target_id_t target, lun_id_t lun) { struct cam_periph_config *periph_conf; u_int unit; int hit; unit = 0; hit = 0; for (periph_conf = cam_pinit; periph_conf->periph_name != NULL; periph_conf++, hit = 0) { if (!strcmp(p_drv->driver_name, periph_conf->periph_name) && IS_SPECIFIED(periph_conf->periph_unit)) { if (IS_SPECIFIED(periph_conf->pathid)) { if (pathid != periph_conf->pathid) continue; hit++; } if (IS_SPECIFIED(periph_conf->target)) { if (target != periph_conf->target) continue; hit++; } if (IS_SPECIFIED(periph_conf->lun)) { if (lun != periph_conf->lun) continue; hit++; } if (hit != 0) { unit = periph_conf->periph_unit; break; } } } /* * Either start from 0 looking for the next unit or from * the unit number given in the periph_conf. This way, * if we have wildcard matches, we don't return the same * unit number twice. */ unit = camperiphnextunit(p_drv, unit, /*wired*/hit); return (unit); } void cam_periph_invalidate(struct cam_periph *periph) { int s; s = splsoftcam(); /* * We only call this routine the first time a peripheral is * invalidated. The oninvalidate() routine is always called at * splsoftcam(). */ if (((periph->flags & CAM_PERIPH_INVALID) == 0) && (periph->periph_oninval != NULL)) periph->periph_oninval(periph); periph->flags |= CAM_PERIPH_INVALID; periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; if (periph->refcount == 0) camperiphfree(periph); else if (periph->refcount < 0) printf("cam_invalidate_periph: refcount < 0!!\n"); splx(s); } static void camperiphfree(struct cam_periph *periph) { int s; struct periph_driver **p_drv; for (p_drv = (struct periph_driver **)periphdriver_set.ls_items; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) break; } if (periph->periph_dtor != NULL) periph->periph_dtor(periph); s = splsoftcam(); TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); (*p_drv)->generation++; splx(s); xpt_remove_periph(periph); if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { union ccb ccb; void *arg; switch (periph->deferred_ac) { case AC_FOUND_DEVICE: ccb.ccb_h.func_code = XPT_GDEV_TYPE; xpt_setup_ccb(&ccb.ccb_h, periph->path, /*priority*/ 1); xpt_action(&ccb); arg = &ccb; break; case AC_PATH_REGISTERED: ccb.ccb_h.func_code = XPT_PATH_INQ; xpt_setup_ccb(&ccb.ccb_h, periph->path, /*priority*/ 1); xpt_action(&ccb); arg = &ccb; break; default: arg = NULL; break; } periph->deferred_callback(NULL, periph->deferred_ac, periph->path, arg); } xpt_free_path(periph->path); free(periph, M_DEVBUF); } /* * Wait interruptibly for an exclusive lock. */ int cam_periph_lock(struct cam_periph *periph, int priority) { int error; while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { periph->flags |= CAM_PERIPH_LOCK_WANTED; if ((error = tsleep(periph, priority, "caplck", 0)) != 0) return error; } if (cam_periph_acquire(periph) != CAM_REQ_CMP) return(ENXIO); periph->flags |= CAM_PERIPH_LOCKED; return 0; } /* * Unlock and wake up any waiters. */ void cam_periph_unlock(struct cam_periph *periph) { periph->flags &= ~CAM_PERIPH_LOCKED; if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { periph->flags &= ~CAM_PERIPH_LOCK_WANTED; wakeup(periph); } cam_periph_release(periph); } /* * Map user virtual pointers into kernel virtual address space, so we can * access the memory. This won't work on physical pointers, for now it's * up to the caller to check for that. (XXX KDM -- should we do that here * instead?) This also only works for up to MAXPHYS memory. Since we use * buffers to map stuff in and out, we're limited to the buffer size. */ int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) { int numbufs, i; int flags[CAM_PERIPH_MAXMAPS]; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; u_int32_t lengths[CAM_PERIPH_MAXMAPS]; u_int32_t dirs[CAM_PERIPH_MAXMAPS]; switch(ccb->ccb_h.func_code) { case XPT_DEV_MATCH: if (ccb->cdm.match_buf_len == 0) { printf("cam_periph_mapmem: invalid match buffer " "length 0\n"); return(EINVAL); } if (ccb->cdm.pattern_buf_len > 0) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; lengths[0] = ccb->cdm.pattern_buf_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; lengths[1] = ccb->cdm.match_buf_len; dirs[1] = CAM_DIR_IN; numbufs = 2; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; lengths[0] = ccb->cdm.match_buf_len; dirs[0] = CAM_DIR_IN; numbufs = 1; } break; case XPT_SCSI_IO: + case XPT_CONT_TARGET_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); data_ptrs[0] = &ccb->csio.data_ptr; lengths[0] = ccb->csio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; default: return(EINVAL); break; /* NOTREACHED */ } /* * Check the transfer length and permissions first, so we don't * have to unmap any previously mapped buffers. */ for (i = 0; i < numbufs; i++) { flags[i] = 0; /* * The userland data pointer passed in may not be page * aligned. vmapbuf() truncates the address to a page * boundary, so if the address isn't page aligned, we'll * need enough space for the given transfer length, plus * whatever extra space is necessary to make it to the page * boundary. */ if ((lengths[i] + (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > DFLTPHYS){ printf("cam_periph_mapmem: attempt to map %u bytes, " "which is greater than DFLTPHYS(%d)\n", lengths[i] + (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK), DFLTPHYS); return(E2BIG); } if (dirs[i] & CAM_DIR_IN) { flags[i] = B_READ; if (useracc(*data_ptrs[i], lengths[i], B_READ) == 0){ printf("cam_periph_mapmem: error, " "address %p, length %lu isn't " "user accessible for READ\n", (void *)*data_ptrs[i], (u_long)lengths[i]); return(EACCES); } } /* * XXX this check is really bogus, since B_WRITE currently * is all 0's, and so it is "set" all the time. */ if (dirs[i] & CAM_DIR_OUT) { flags[i] |= B_WRITE; if (useracc(*data_ptrs[i], lengths[i], B_WRITE) == 0){ printf("cam_periph_mapmem: error, " "address %p, length %lu isn't " "user accessible for WRITE\n", (void *)*data_ptrs[i], (u_long)lengths[i]); return(EACCES); } } } /* this keeps the current process from getting swapped */ /* * XXX KDM should I use P_NOSWAP instead? */ PHOLD(curproc); for (i = 0; i < numbufs; i++) { /* * Get the buffer. */ mapinfo->bp[i] = getpbuf(NULL); /* save the buffer's data address */ mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data; /* put our pointer in the data slot */ mapinfo->bp[i]->b_data = *data_ptrs[i]; /* set the transfer length, we know it's < DFLTPHYS */ mapinfo->bp[i]->b_bufsize = lengths[i]; /* set the flags */ mapinfo->bp[i]->b_flags = flags[i] | B_PHYS | B_BUSY; /* map the buffer into kernel memory */ vmapbuf(mapinfo->bp[i]); /* set our pointer to the new mapped area */ *data_ptrs[i] = mapinfo->bp[i]->b_data; mapinfo->num_bufs_used++; } return(0); } /* * Unmap memory segments mapped into kernel virtual address space by * cam_periph_mapmem(). */ void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) { int numbufs, i; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; if (mapinfo->num_bufs_used <= 0) { /* allow ourselves to be swapped once again */ PRELE(curproc); return; } switch (ccb->ccb_h.func_code) { case XPT_DEV_MATCH: numbufs = min(mapinfo->num_bufs_used, 2); if (numbufs == 1) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; } break; case XPT_SCSI_IO: data_ptrs[0] = &ccb->csio.data_ptr; numbufs = min(mapinfo->num_bufs_used, 1); break; default: /* allow ourselves to be swapped once again */ PRELE(curproc); return; break; /* NOTREACHED */ } for (i = 0; i < numbufs; i++) { /* Set the user's pointer back to the original value */ *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr; /* unmap the buffer */ vunmapbuf(mapinfo->bp[i]); /* clear the flags we set above */ mapinfo->bp[i]->b_flags &= ~(B_PHYS|B_BUSY); /* release the buffer */ relpbuf(mapinfo->bp[i], NULL); } /* allow ourselves to be swapped once again */ PRELE(curproc); } union ccb * cam_periph_getccb(struct cam_periph *periph, u_int32_t priority) { struct ccb_hdr *ccb_h; int s; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering cdgetccb\n")); s = splsoftcam(); while (periph->ccb_list.slh_first == NULL) { if (periph->immediate_priority > priority) periph->immediate_priority = priority; xpt_schedule(periph, priority); if ((periph->ccb_list.slh_first != NULL) && (periph->ccb_list.slh_first->pinfo.priority == priority)) break; tsleep(&periph->ccb_list, PRIBIO, "cgticb", 0); } ccb_h = periph->ccb_list.slh_first; SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle); splx(s); return ((union ccb *)ccb_h); } void cam_periph_ccbwait(union ccb *ccb) { int s; s = splsoftcam(); if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX) || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)) tsleep(&ccb->ccb_h.cbfcnp, PRIBIO, "cbwait", 0); splx(s); } int cam_periph_ioctl(struct cam_periph *periph, int cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)) { union ccb *ccb; int error; int found; error = found = 0; switch(cmd){ case CAMGETPASSTHRU: ccb = cam_periph_getccb(periph, /* priority */ 1); xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, /*priority*/1); ccb->ccb_h.func_code = XPT_GDEVLIST; /* * Basically, the point of this is that we go through * getting the list of devices, until we find a passthrough * device. In the current version of the CAM code, the * only way to determine what type of device we're dealing * with is by its name. */ while (found == 0) { ccb->cgdl.index = 0; ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { /* we want the next device in the list */ xpt_action(ccb); if (strncmp(ccb->cgdl.periph_name, "pass", 4) == 0){ found = 1; break; } } if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && (found == 0)) { ccb->cgdl.periph_name[0] = '\0'; ccb->cgdl.unit_number = 0; break; } } /* copy the result back out */ bcopy(ccb, addr, sizeof(union ccb)); /* and release the ccb */ xpt_release_ccb(ccb); break; default: error = ENOTTY; break; } return(error); } int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds) { int error; error = 0; /* * If the user has supplied a stats structure, and if we understand * this particular type of ccb, record the transaction start. */ if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO)) devstat_start_transaction(ds); xpt_action(ccb); do { cam_periph_ccbwait(ccb); if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) error = 0; else if (error_routine != NULL) error = (*error_routine)(ccb, camflags, sense_flags); else error = 0; } while (error == ERESTART); if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(ccb->ccb_h.path, /* relsim_flags */0, /* openings */0, /* timeout */0, /* getcount_only */ FALSE); if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO)) devstat_end_transaction(ds, ccb->csio.dxfer_len, ccb->csio.tag_action & 0xf, ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ? DEVSTAT_NO_DATA : (ccb->ccb_h.flags & CAM_DIR_OUT) ? DEVSTAT_WRITE : DEVSTAT_READ); return(error); } +void +cam_freeze_devq(struct cam_path *path) +{ + struct ccb_hdr ccb_h; + + xpt_setup_ccb(&ccb_h, path, /*priority*/1); + ccb_h.func_code = XPT_NOOP; + ccb_h.flags = CAM_DEV_QFREEZE; + xpt_action((union ccb *)&ccb_h); +} + u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t openings, u_int32_t timeout, int getcount_only) { struct ccb_relsim crs; xpt_setup_ccb(&crs.ccb_h, path, /*priority*/1); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; crs.release_flags = relsim_flags; crs.openings = openings; crs.release_timeout = timeout; xpt_action((union ccb *)&crs); return (crs.qfrozen_cnt); } #define saved_ccb_ptr ppriv_ptr0 static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb) { cam_status status; int frozen; int sense; struct scsi_start_stop_unit *scsi_cmd; u_int32_t relsim_flags, timeout; u_int32_t qfrozen_cnt; status = done_ccb->ccb_h.status; frozen = (status & CAM_DEV_QFRZN) != 0; sense = (status & CAM_AUTOSNS_VALID) != 0; status &= CAM_STATUS_MASK; timeout = 0; relsim_flags = 0; /* * Unfreeze the queue once if it is already frozen.. */ if (frozen != 0) { qfrozen_cnt = cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*openings*/0, /*timeout*/0, /*getcount_only*/0); } switch (status) { case CAM_REQ_CMP: /* * If we have successfully taken a device from the not * ready to ready state, re-scan the device and re-get the * inquiry information. Many devices (mostly disks) don't * properly report their inquiry information unless they * are spun up. */ if (done_ccb->ccb_h.func_code == XPT_SCSI_IO) { scsi_cmd = (struct scsi_start_stop_unit *) &done_ccb->csio.cdb_io.cdb_bytes; if (scsi_cmd->opcode == START_STOP_UNIT) xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL); } bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, sizeof(union ccb)); periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; xpt_action(done_ccb); break; case CAM_SCSI_STATUS_ERROR: scsi_cmd = (struct scsi_start_stop_unit *) &done_ccb->csio.cdb_io.cdb_bytes; if (sense != 0) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; sense = &done_ccb->csio.sense_data; scsi_extract_sense(sense, &error_code, &sense_key, &asc, &ascq); /* * If the error is "invalid field in CDB", * and the load/eject flag is set, turn the * flag off and try again. This is just in * case the drive in question barfs on the * load eject flag. The CAM code should set * the load/eject flag by default for * removable media. */ /* XXX KDM * Should we check to see what the specific * scsi status is?? Or does it not matter * since we already know that there was an * error, and we know what the specific * error code was, and we know what the * opcode is.. */ if ((scsi_cmd->opcode == START_STOP_UNIT) && ((scsi_cmd->how & SSS_LOEJ) != 0) && (asc == 0x24) && (ascq == 0x00) && (done_ccb->ccb_h.retry_count > 0)) { scsi_cmd->how &= ~SSS_LOEJ; xpt_action(done_ccb); } else if (done_ccb->ccb_h.retry_count > 0) { /* * In this case, the error recovery * command failed, but we've got * some retries left on it. Give * it another try. */ /* set the timeout to .5 sec */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = 500; xpt_action(done_ccb); break; } else { /* * Copy the original CCB back and * send it back to the caller. */ bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, sizeof(union ccb)); periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; xpt_action(done_ccb); } } else { /* * Eh?? The command failed, but we don't * have any sense. What's up with that? * Fire the CCB again to return it to the * caller. */ bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, sizeof(union ccb)); periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; xpt_action(done_ccb); } break; default: bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, sizeof(union ccb)); periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; xpt_action(done_ccb); break; } /* decrement the retry count */ if (done_ccb->ccb_h.retry_count > 0) done_ccb->ccb_h.retry_count--; qfrozen_cnt = cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/relsim_flags, /*openings*/0, /*timeout*/timeout, /*getcount_only*/0); } +/* + * Generic Async Event handler. Peripheral drivers usually + * filter out the events that require personal attention, + * and leave the rest to this function. + */ +void +cam_periph_async(struct cam_periph *periph, u_int32_t code, + struct cam_path *path, void *arg) +{ + switch (code) { + case AC_LOST_DEVICE: + cam_periph_invalidate(periph); + break; + case AC_SENT_BDR: + case AC_BUS_RESET: + { + cam_periph_bus_settle(periph, SCSI_DELAY); + break; + } + default: + break; + } +} + +void +cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) +{ + struct ccb_getdevstats cgds; + + xpt_setup_ccb(&cgds.ccb_h, periph->path, /*priority*/1); + cgds.ccb_h.func_code = XPT_GDEV_STATS; + xpt_action((union ccb *)&cgds); + cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); +} + +void +cam_periph_freeze_after_event(struct cam_periph *periph, + struct timeval* event_time, u_int duration_ms) +{ + struct timeval delta; + struct timeval duration_tv; + int s; + + s = splclock(); + microtime(&delta); + splx(s); + timevalsub(&delta, event_time); + duration_tv.tv_sec = duration_ms / 1000; + duration_tv.tv_usec = (duration_ms % 1000) * 1000; + if (timevalcmp(&delta, &duration_tv, <)) { + timevalsub(&duration_tv, &delta); + + duration_ms = duration_tv.tv_sec * 1000; + duration_ms += duration_tv.tv_usec / 1000; + cam_freeze_devq(periph->path); + cam_release_devq(periph->path, + RELSIM_RELEASE_AFTER_TIMEOUT, + /*reduction*/0, + /*timeout*/duration_ms, + /*getcount_only*/0); + } + +} + /* * Generic error handler. Peripheral drivers usually filter * out the errors that they handle in a unique mannor, then * call this function. */ int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags, union ccb *save_ccb) { cam_status status; int frozen; int sense; int error; int openings; int retry; u_int32_t relsim_flags; u_int32_t timeout; status = ccb->ccb_h.status; frozen = (status & CAM_DEV_QFRZN) != 0; sense = (status & CAM_AUTOSNS_VALID) != 0; status &= CAM_STATUS_MASK; relsim_flags = 0; switch (status) { case CAM_REQ_CMP: /* decrement the number of retries */ retry = ccb->ccb_h.retry_count > 0; if (retry) ccb->ccb_h.retry_count--; error = 0; break; case CAM_AUTOSENSE_FAIL: case CAM_SCSI_STATUS_ERROR: switch (ccb->csio.scsi_status) { case SCSI_STATUS_OK: case SCSI_STATUS_COND_MET: case SCSI_STATUS_INTERMED: case SCSI_STATUS_INTERMED_COND_MET: error = 0; break; case SCSI_STATUS_CMD_TERMINATED: case SCSI_STATUS_CHECK_COND: if (sense != 0) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; struct cam_periph *periph; scsi_sense_action err_action; struct ccb_getdev cgd; sense = &ccb->csio.sense_data; scsi_extract_sense(sense, &error_code, &sense_key, &asc, &ascq); periph = xpt_path_periph(ccb->ccb_h.path); /* * Grab the inquiry data for this device. */ xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, /*priority*/ 1); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); err_action = scsi_error_action(asc, ascq, &cgd.inq_data); /* * Send a Test Unit Ready to the device. * If the 'many' flag is set, we send 120 * test unit ready commands, one every half * second. Otherwise, we just send one TUR. * We only want to do this if the retry * count has not been exhausted. */ if (((err_action & SS_MASK) == SS_TUR) && save_ccb != NULL && ccb->ccb_h.retry_count > 0) { /* * Since error recovery is already * in progress, don't attempt to * process this error. It is probably * related to the error that caused * the currently active error recovery * action. Also, we only have * space for one saved CCB, so if we * had two concurrent error recovery * actions, we would end up * over-writing one error recovery * CCB with another one. */ if (periph->flags & CAM_PERIPH_RECOVERY_INPROG) { error = ERESTART; break; } periph->flags |= CAM_PERIPH_RECOVERY_INPROG; /* decrement the number of retries */ if ((err_action & SSQ_DECREMENT_COUNT) != 0) { retry = 1; ccb->ccb_h.retry_count--; } bcopy(ccb, save_ccb, sizeof(*save_ccb)); /* * We retry this one every half * second for a minute. If the * device hasn't become ready in a * minute's time, it's unlikely to * ever become ready. If the table * doesn't specify SSQ_MANY, we can * only try this once. Oh well. */ if ((err_action & SSQ_MANY) != 0) scsi_test_unit_ready(&ccb->csio, /*retries*/120, camperiphdone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/5000); else scsi_test_unit_ready(&ccb->csio, /*retries*/1, camperiphdone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/5000); /* release the queue after .5 sec. */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = 500; /* * Drop the priority to 0 so that * we are the first to execute. Also * freeze the queue after this command * is sent so that we can restore the * old csio and have it queued in the * proper order before we let normal * transactions go to the drive. */ ccb->ccb_h.pinfo.priority = 0; ccb->ccb_h.flags |= CAM_DEV_QFREEZE; /* * Save a pointer to the original * CCB in the new CCB. */ ccb->ccb_h.saved_ccb_ptr = save_ccb; error = ERESTART; } /* * Send a start unit command to the device, * and then retry the command. We only * want to do this if the retry count has * not been exhausted. If the user * specified 0 retries, then we follow * their request and do not retry. */ else if (((err_action & SS_MASK) == SS_START) && save_ccb != NULL && ccb->ccb_h.retry_count > 0) { int le; /* * Only one error recovery action * at a time. See above. */ if (periph->flags & CAM_PERIPH_RECOVERY_INPROG) { error = ERESTART; break; } periph->flags |= CAM_PERIPH_RECOVERY_INPROG; /* decrement the number of retries */ retry = 1; ccb->ccb_h.retry_count--; /* * Check for removable media and * set load/eject flag * appropriately. */ if (SID_IS_REMOVABLE(&cgd.inq_data)) le = TRUE; else le = FALSE; /* * Attempt to start the drive up. * * Save the current ccb so it can * be restored and retried once the * drive is started up. */ bcopy(ccb, save_ccb, sizeof(*save_ccb)); scsi_start_stop(&ccb->csio, /*retries*/1, camperiphdone, MSG_SIMPLE_Q_TAG, /*start*/TRUE, /*load/eject*/le, /*immediate*/FALSE, SSD_FULL_SIZE, /*timeout*/50000); /* * Drop the priority to 0 so that * we are the first to execute. Also * freeze the queue after this command * is sent so that we can restore the * old csio and have it queued in the * proper order before we let normal * transactions go to the drive. */ ccb->ccb_h.pinfo.priority = 0; ccb->ccb_h.flags |= CAM_DEV_QFREEZE; /* * Save a pointer to the original * CCB in the new CCB. */ ccb->ccb_h.saved_ccb_ptr = save_ccb; error = ERESTART; } else if ((sense_flags & SF_RETRY_UA) != 0) { /* * XXX KDM this is a *horrible* * hack. */ error = scsi_interpret_sense(ccb, sense_flags, &relsim_flags, &openings, &timeout, err_action); } /* * Theoretically, this code should send a * test unit ready to the given device, and * if it returns and error, send a start * unit command. Since we don't yet have * the capability to do two-command error * recovery, just send a start unit. * XXX KDM fix this! */ else if (((err_action & SS_MASK) == SS_TURSTART) && save_ccb != NULL && ccb->ccb_h.retry_count > 0) { int le; /* * Only one error recovery action * at a time. See above. */ if (periph->flags & CAM_PERIPH_RECOVERY_INPROG) { error = ERESTART; break; } periph->flags |= CAM_PERIPH_RECOVERY_INPROG; /* decrement the number of retries */ retry = 1; ccb->ccb_h.retry_count--; /* * Check for removable media and * set load/eject flag * appropriately. */ if (SID_IS_REMOVABLE(&cgd.inq_data)) le = TRUE; else le = FALSE; /* * Attempt to start the drive up. * * Save the current ccb so it can * be restored and retried once the * drive is started up. */ bcopy(ccb, save_ccb, sizeof(*save_ccb)); scsi_start_stop(&ccb->csio, /*retries*/1, camperiphdone, MSG_SIMPLE_Q_TAG, /*start*/TRUE, /*load/eject*/le, /*immediate*/FALSE, SSD_FULL_SIZE, /*timeout*/50000); /* release the queue after .5 sec. */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = 500; /* * Drop the priority to 0 so that * we are the first to execute. Also * freeze the queue after this command * is sent so that we can restore the * old csio and have it queued in the * proper order before we let normal * transactions go to the drive. */ ccb->ccb_h.pinfo.priority = 0; ccb->ccb_h.flags |= CAM_DEV_QFREEZE; /* * Save a pointer to the original * CCB in the new CCB. */ ccb->ccb_h.saved_ccb_ptr = save_ccb; error = ERESTART; } else { error = scsi_interpret_sense(ccb, sense_flags, &relsim_flags, &openings, &timeout, err_action); } } else if (ccb->csio.scsi_status == SCSI_STATUS_CHECK_COND && status != CAM_AUTOSENSE_FAIL) { /* no point in decrementing the retry count */ panic("cam_periph_error: scsi status of " "CHECK COND returned but no sense " "information is availible. " "Controller should have returned " "CAM_AUTOSENSE_FAILED"); /* NOTREACHED */ error = EIO; } else if (ccb->ccb_h.retry_count > 0) { /* * XXX KDM shouldn't there be a better * argument to return?? */ error = EIO; } else { /* decrement the number of retries */ retry = ccb->ccb_h.retry_count > 0; if (retry) ccb->ccb_h.retry_count--; /* * If it was aborted with no * clue as to the reason, just * retry it again. */ error = ERESTART; } break; case SCSI_STATUS_QUEUE_FULL: { /* no decrement */ struct ccb_getdev cgd; /* * First off, find out what the current * transaction counts are. */ xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, /*priority*/1); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); /* * If we were the only transaction active, treat * the QUEUE FULL as if it were a BUSY condition. */ if (cgd.dev_active != 0) { /* * Reduce the number of openings to * be 1 less than the amount it took * to get a queue full bounded by the * minimum allowed tag count for this * device. */ openings = cgd.dev_active; if (openings < cgd.mintags) openings = cgd.mintags; if (openings < cgd.dev_active+cgd.dev_openings) relsim_flags = RELSIM_ADJUST_OPENINGS; else { /* * Some devices report queue full for * temporary resource shortages. For * this reason, we allow a minimum * tag count to be entered via a * quirk entry to prevent the queue * count on these devices from falling * to a pessimisticly low value. We * still wait for the next successful * completion, however, before queueing * more transactions to the device. */ relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT; } timeout = 0; error = ERESTART; break; } /* FALLTHROUGH */ } case SCSI_STATUS_BUSY: /* * Restart the queue after either another * command completes or a 1 second timeout. */ /* * XXX KDM ask JTG about this again, do we need to * be looking at the retry count here? */ error = ERESTART; relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT | RELSIM_RELEASE_AFTER_CMDCMPLT; timeout = 1000; break; case SCSI_STATUS_RESERV_CONFLICT: error = EIO; break; default: error = EIO; break; } break; case CAM_REQ_CMP_ERR: case CAM_CMD_TIMEOUT: case CAM_UNEXP_BUSFREE: case CAM_UNCOR_PARITY: case CAM_DATA_RUN_ERR: /* decrement the number of retries */ retry = ccb->ccb_h.retry_count > 0; if (retry) { ccb->ccb_h.retry_count--; error = ERESTART; } else { error = EIO; } break; case CAM_UA_ABORT: case CAM_UA_TERMIO: case CAM_MSG_REJECT_REC: /* XXX Don't know that these are correct */ error = EIO; break; case CAM_SEL_TIMEOUT: { /* * XXX * A single selection timeout should not be enough * to invalidate a device. We should retry for multiple * seconds assuming this isn't a probe. We'll probably * need a special flag for that. */ #if 0 struct cam_path *newpath; /* Should we do more if we can't create the path?? */ if (xpt_create_path(&newpath, xpt_path_periph(ccb->ccb_h.path), xpt_path_path_id(ccb->ccb_h.path), xpt_path_target_id(ccb->ccb_h.path), CAM_LUN_WILDCARD) != CAM_REQ_CMP) break; /* * Let peripheral drivers know that this device has gone * away. */ xpt_async(AC_LOST_DEVICE, newpath, NULL); xpt_free_path(newpath); #endif if ((sense_flags & SF_RETRY_SELTO) != 0) { retry = ccb->ccb_h.retry_count > 0; if (retry) { ccb->ccb_h.retry_count--; error = ERESTART; /* * Wait half a second to give the device * time to recover before we try again. */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = 500; } else { error = ENXIO; } } else { error = ENXIO; } break; } case CAM_REQ_INVALID: case CAM_PATH_INVALID: case CAM_DEV_NOT_THERE: case CAM_NO_HBA: case CAM_PROVIDE_FAIL: case CAM_REQ_TOO_BIG: error = EINVAL; break; case CAM_SCSI_BUS_RESET: case CAM_BDR_SENT: case CAM_REQUEUE_REQ: /* Unconditional requeue, dammit */ error = ERESTART; break; case CAM_RESRC_UNAVAIL: case CAM_BUSY: /* timeout??? */ default: /* decrement the number of retries */ retry = ccb->ccb_h.retry_count > 0; if (retry) { ccb->ccb_h.retry_count--; error = ERESTART; } else { /* Check the sense codes */ error = EIO; } break; } /* Attempt a retry */ if (error == ERESTART || error == 0) { if (frozen != 0) ccb->ccb_h.status &= ~CAM_DEV_QFRZN; if (error == ERESTART) xpt_action(ccb); if (frozen != 0) { cam_release_devq(ccb->ccb_h.path, relsim_flags, openings, timeout, /*getcount_only*/0); } } return (error); } diff --git a/sys/cam/cam_periph.h b/sys/cam/cam_periph.h index 9bad491f14a1..2efee41c4461 100644 --- a/sys/cam/cam_periph.h +++ b/sys/cam/cam_periph.h @@ -1,140 +1,148 @@ /* * Data structures and definitions for CAM peripheral ("type") drivers. * * Copyright (c) 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * - * $Id: cam_periph.h,v 1.2 1998/10/13 21:41:32 ken Exp $ + * $Id: cam_periph.h,v 1.3 1998/10/22 22:16:48 ken Exp $ */ #ifndef _CAM_CAM_PERIPH_H #define _CAM_CAM_PERIPH_H 1 #include #ifdef KERNEL extern struct linker_set periphdriver_set; typedef void (periph_init_t)(void); /* * Callback informing the peripheral driver * it can perform it's initialization since * the XPT is now fully initialized. */ typedef periph_init_t *periph_init_func_t; struct periph_driver { periph_init_func_t init; char *driver_name; TAILQ_HEAD(,cam_periph) units; u_int generation; }; typedef enum { CAM_PERIPH_BIO, CAM_PERIPH_NET } cam_periph_type; /* Generically usefull offsets into the peripheral private area */ #define ppriv_ptr0 periph_priv.entries[0].ptr #define ppriv_ptr1 periph_priv.entries[1].ptr #define ppriv_field0 periph_priv.entries[0].field #define ppriv_field1 periph_priv.entries[1].field typedef void periph_start_t (struct cam_periph *periph, union ccb *start_ccb); typedef cam_status periph_ctor_t (struct cam_periph *periph, void *arg); typedef void periph_oninv_t (struct cam_periph *periph); typedef void periph_dtor_t (struct cam_periph *periph); struct cam_periph { cam_pinfo pinfo; periph_start_t *periph_start; periph_oninv_t *periph_oninval; periph_dtor_t *periph_dtor; char *periph_name; struct cam_path *path; /* Compiled path to device */ void *softc; u_int32_t unit_number; cam_periph_type type; u_int32_t flags; #define CAM_PERIPH_RUNNING 0x01 #define CAM_PERIPH_LOCKED 0x02 #define CAM_PERIPH_LOCK_WANTED 0x04 #define CAM_PERIPH_INVALID 0x08 #define CAM_PERIPH_NEW_DEV_FOUND 0x10 #define CAM_PERIPH_RECOVERY_INPROG 0x20 u_int32_t immediate_priority; u_int32_t refcount; SLIST_HEAD(, ccb_hdr) ccb_list; /* For "immediate" requests */ SLIST_ENTRY(cam_periph) periph_links; TAILQ_ENTRY(cam_periph) unit_links; ac_callback_t *deferred_callback; ac_code deferred_ac; }; #define CAM_PERIPH_MAXMAPS 2 struct cam_periph_map_info { int num_bufs_used; struct buf *bp[CAM_PERIPH_MAXMAPS]; }; cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *, ac_callback_t *, ac_code, void *arg); struct cam_periph *cam_periph_find(struct cam_path *path, char *name); int cam_periph_lock(struct cam_periph *periph, int priority); void cam_periph_unlock(struct cam_periph *periph); cam_status cam_periph_acquire(struct cam_periph *periph); void cam_periph_release(struct cam_periph *periph); void cam_periph_invalidate(struct cam_periph *periph); int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo); void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo); union ccb *cam_periph_getccb(struct cam_periph *periph, u_int32_t priority); void cam_periph_ccbwait(union ccb *ccb); int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds); int cam_periph_ioctl(struct cam_periph *periph, int cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)); +void cam_freeze_devq(struct cam_path *path); u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t opening_reduction, u_int32_t timeout, int getcount_only); +void cam_periph_async(struct cam_periph *periph, u_int32_t code, + struct cam_path *path, void *arg); +void cam_periph_bus_settle(struct cam_periph *periph, + u_int bus_settle_ms); +void cam_periph_freeze_after_event(struct cam_periph *periph, + struct timeval* event_time, + u_int duration_ms); int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags, union ccb *save_ccb); #endif /* KERNEL */ #endif /* _CAM_CAM_PERIPH_H */ diff --git a/sys/cam/cam_xpt.c b/sys/cam/cam_xpt.c index 4f277247d855..abd91fafccaf 100644 --- a/sys/cam/cam_xpt.c +++ b/sys/cam/cam_xpt.c @@ -1,6084 +1,6135 @@ /* * Implementation of the Common Access Method Transport (XPT) layer. * * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * - * $Id: cam_xpt.c,v 1.57 1999/05/11 15:44:39 mjacob Exp $ + * $Id: cam_xpt.c,v 1.58 1999/05/18 00:41:05 gibbs Exp $ */ #include #include #include #include #include #include +#include #include #include #include #include #include #ifdef PC98 #include /* geometry translation */ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_cam.h" -#include "opt_scsi.h" /* Datastructures internal to the xpt layer */ /* * Definition of an async handler callback block. These are used to add * SIMs and peripherals to the async callback lists. */ struct async_node { SLIST_ENTRY(async_node) links; u_int32_t event_enable; /* Async Event enables */ void (*callback)(void *arg, u_int32_t code, struct cam_path *path, void *args); void *callback_arg; }; SLIST_HEAD(async_list, async_node); SLIST_HEAD(periph_list, cam_periph); static STAILQ_HEAD(highpowerlist, ccb_hdr) highpowerq; /* * This is the maximum number of high powered commands (e.g. start unit) * that can be outstanding at a particular time. */ #ifndef CAM_MAX_HIGHPOWER #define CAM_MAX_HIGHPOWER 4 #endif -/* - * This is the number of seconds we wait for devices to settle after a SCSI - * bus reset. - */ -#ifndef SCSI_DELAY -#define SCSI_DELAY 2000 -#endif -/* - * If someone sets this to 0, we assume that they want the minimum - * allowable bus settle delay. All devices need _some_ sort of bus settle - * delay, so we'll set it to a minimum value of 100ms. - */ -#if (SCSI_DELAY == 0) -#undef SCSI_DELAY -#define SCSI_DELAY 100 -#endif - -/* - * Make sure the user isn't using seconds instead of milliseconds. - */ -#if (SCSI_DELAY < 100) -#error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value" -#endif - /* number of high powered commands that can go through right now */ static int num_highpower = CAM_MAX_HIGHPOWER; /* * Structure for queueing a device in a run queue. * There is one run queue for allocating new ccbs, * and another for sending ccbs to the controller. */ struct cam_ed_qinfo { cam_pinfo pinfo; struct cam_ed *device; }; /* * The CAM EDT (Existing Device Table) contains the device information for * all devices for all busses in the system. The table contains a * cam_ed structure for each device on the bus. */ struct cam_ed { TAILQ_ENTRY(cam_ed) links; struct cam_ed_qinfo alloc_ccb_entry; struct cam_ed_qinfo send_ccb_entry; struct cam_et *target; lun_id_t lun_id; struct camq drvq; /* * Queue of type drivers wanting to do * work on this device. */ struct cam_ccbq ccbq; /* Queue of pending ccbs */ struct async_list asyncs; /* Async callback info for this B/T/L */ struct periph_list periphs; /* All attached devices */ u_int generation; /* Generation number */ struct cam_periph *owner; /* Peripheral driver's ownership tag */ struct xpt_quirk_entry *quirk; /* Oddities about this device */ /* Storage for the inquiry data */ struct scsi_inquiry_data inq_data; u_int8_t inq_flags; /* * Current settings for inquiry flags. * This allows us to override settings * like disconnection and tagged * queuing for a device. */ u_int8_t queue_flags; /* Queue flags from the control page */ u_int8_t *serial_num; u_int8_t serial_num_len; u_int32_t qfrozen_cnt; u_int32_t flags; #define CAM_DEV_UNCONFIGURED 0x01 #define CAM_DEV_REL_TIMEOUT_PENDING 0x02 #define CAM_DEV_REL_ON_COMPLETE 0x04 #define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08 #define CAM_DEV_RESIZE_QUEUE_NEEDED 0x10 #define CAM_DEV_TAG_AFTER_COUNT 0x20 +#define CAM_DEV_INQUIRY_DATA_VALID 0x40 u_int32_t tag_delay_count; #define CAM_TAG_DELAY_COUNT 5 u_int32_t refcount; struct callout_handle c_handle; }; /* * Each target is represented by an ET (Existing Target). These * entries are created when a target is successfully probed with an * identify, and removed when a device fails to respond after a number * of retries, or a bus rescan finds the device missing. */ struct cam_et { TAILQ_HEAD(, cam_ed) ed_entries; TAILQ_ENTRY(cam_et) links; struct cam_eb *bus; target_id_t target_id; u_int32_t refcount; u_int generation; + struct timeval last_reset; }; /* * Each bus is represented by an EB (Existing Bus). These entries * are created by calls to xpt_bus_register and deleted by calls to * xpt_bus_deregister. */ struct cam_eb { TAILQ_HEAD(, cam_et) et_entries; TAILQ_ENTRY(cam_eb) links; path_id_t path_id; struct cam_sim *sim; + struct timeval last_reset; u_int32_t flags; #define CAM_EB_RUNQ_SCHEDULED 0x01 u_int32_t refcount; u_int generation; }; struct cam_path { struct cam_periph *periph; struct cam_eb *bus; struct cam_et *target; struct cam_ed *device; }; struct xpt_quirk_entry { struct scsi_inquiry_pattern inq_pat; u_int8_t quirks; #define CAM_QUIRK_NOLUNS 0x01 #define CAM_QUIRK_NOSERIAL 0x02 u_int mintags; u_int maxtags; }; typedef enum { XPT_FLAG_OPEN = 0x01 } xpt_flags; struct xpt_softc { xpt_flags flags; u_int32_t generation; #ifdef DEVFS void *xpt_devfs_token; void *ctl_devfs_token; #endif }; static const char quantum[] = "QUANTUM"; static const char sony[] = "SONY"; static const char west_digital[] = "WDIGTL"; static const char samsung[] = "SAMSUNG"; static const char seagate[] = "SEAGATE"; static struct xpt_quirk_entry xpt_quirk_table[] = { { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP34550*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP32275*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "HP", "C372*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "MICROP", "3391*", "x43h" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Unfortunately, the Quantum Atlas III has the same * problem as the Atlas II drives above. * Reported by: "Johan Granlund" * * For future reference, the drive with the problem was: * QUANTUM QM39100TD-SW N1B0 * * It's possible that Quantum will fix the problem in later * firmware revisions. If that happens, the quirk entry * will need to be made specific to the firmware revisions * with the problem. * */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * 18 Gig Atlas III, same problem as the 9G version. * Reported by: Andre Albsmeier * * * For future reference, the drive with the problem was: * QUANTUM QM318000TD-S N491 */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM318000*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * Broken tagged queuing drive * Reported by: Bret Ford * and: Martin Renters */ { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST410800*", "71*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, /* * The Seagate Medalist Pro drives have very poor write * performance with anything more than 2 tags. * * Reported by: Paul van der Zwan * Drive: * * Reported by: Jeremy Lea * Drive: * * No one has actually reported that the 9G version * (ST39140*) of the Medalist Pro has the same problem, but * we're assuming that it does because the 4G and 6.5G * versions of the drive are broken. */ { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST34520*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST36530*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST39140*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { /* * Slow when tagged queueing is enabled. Write performance * steadily drops off with more and more concurrent * transactions. Best sequential write performance with * tagged queueing turned off and write caching turned on. * * PR: kern/10398 * Submitted by: Hideaki Okada * Drive: DCAS-34330 w/ "S65A" firmware. * * The drive with the problem had the "S65A" firmware * revision, and has also been reported (by Stephen J. * Roznowski ) for a drive with the "S61A" * firmware revision. * * Although no one has reported problems with the 2 gig * version of the DCAS drive, the assumption is that it * has the same problems as the 4 gig version. Therefore * this quirk entries disables tagged queueing for all * DCAS drives. */ { T_DIRECT, SIP_MEDIA_FIXED, "IBM", "DCAS*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "iomega", "jaz*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "CONNER", "CFP2107*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Broken tagged queuing drive. * Submitted by: * NAKAJI Hiroyuki * in PR kern/9535 */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN34324U*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "WDE*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "ENTERPRISE", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Doesn't handle queue full condition correctly, * so we need to limit maxtags to what the device * can handle instead of determining this automatically. */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN321010S*", "*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/32 }, { /* Really only one LUN */ { T_ENCLOSURE, SIP_MEDIA_FIXED, "SUN", "SENA*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* I can't believe we need a quirk for DPT volumes. */ { T_ANY, SIP_MEDIA_FIXED|SIP_MEDIA_REMOVABLE, "DPT", "*", "*" }, CAM_QUIRK_NOSERIAL|CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/255 }, { /* * Many Sony CDROM drives don't like multi-LUN probing. */ { T_CDROM, SIP_MEDIA_REMOVABLE, sony, "CD-ROM CDU*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * This drive doesn't like multiple LUN probing. * Submitted by: Parag Patel */ { T_WORM, SIP_MEDIA_REMOVABLE, sony, "CD-R CDU9*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * The 8200 doesn't like multi-lun probing, and probably * don't like serial number requests either. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "EXABYTE", "EXB-8200*", "*" }, CAM_QUIRK_NOSERIAL|CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * This old revision of the TDC3600 is also SCSI-1, and * hangs upon serial number probing. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG", " TDC 3600", "U07:" }, CAM_QUIRK_NOSERIAL, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "CALIPER", "CP150", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "KENNEDY", "96X2*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* Default tagged queuing parameters for all devices */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, /*vendor*/"*", /*product*/"*", /*revision*/"*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/255 }, }; +static const int xpt_quirk_table_size = + sizeof(xpt_quirk_table) / sizeof(*xpt_quirk_table); + typedef enum { DM_RET_COPY = 0x01, DM_RET_FLAG_MASK = 0x0f, DM_RET_NONE = 0x00, DM_RET_STOP = 0x10, DM_RET_DESCEND = 0x20, DM_RET_ERROR = 0x30, DM_RET_ACTION_MASK = 0xf0 } dev_match_ret; typedef enum { XPT_DEPTH_BUS, XPT_DEPTH_TARGET, XPT_DEPTH_DEVICE, XPT_DEPTH_PERIPH } xpt_traverse_depth; struct xpt_traverse_config { xpt_traverse_depth depth; void *tr_func; void *tr_arg; }; typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg); typedef int xpt_targetfunc_t (struct cam_et *target, void *arg); typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg); typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg); typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg); /* Transport layer configuration information */ static struct xpt_softc xsoftc; /* Queues for our software interrupt handler */ typedef TAILQ_HEAD(cam_isrq, ccb_hdr) cam_isrq_t; static cam_isrq_t cam_bioq; static cam_isrq_t cam_netq; /* "Pool" of inactive ccbs managed by xpt_alloc_ccb and xpt_free_ccb */ static SLIST_HEAD(,ccb_hdr) ccb_freeq; static u_int xpt_max_ccbs; /* * Maximum size of ccb pool. Modified as * devices are added/removed or have their * opening counts changed. */ static u_int xpt_ccb_count; /* Current count of allocated ccbs */ static struct cam_periph *xpt_periph; static periph_init_t xpt_periph_init; static periph_init_t probe_periph_init; static struct periph_driver xpt_driver = { xpt_periph_init, "xpt", TAILQ_HEAD_INITIALIZER(xpt_driver.units) }; static struct periph_driver probe_driver = { probe_periph_init, "probe", TAILQ_HEAD_INITIALIZER(probe_driver.units) }; DATA_SET(periphdriver_set, xpt_driver); DATA_SET(periphdriver_set, probe_driver); #define XPT_CDEV_MAJOR 104 static d_open_t xptopen; static d_close_t xptclose; static d_ioctl_t xptioctl; static struct cdevsw xpt_cdevsw = { /*d_open*/ xptopen, /*d_close*/ xptclose, /*d_read*/ noread, /*d_write*/ nowrite, /*d_ioctl*/ xptioctl, /*d_stop*/ nostop, /*d_reset*/ noreset, /*d_devtotty*/ nodevtotty, /*d_poll*/ NULL, /*d_mmap*/ nommap, /*d_strategy*/ nostrategy, /*d_name*/ "xpt", /*d_spare*/ NULL, /*d_maj*/ -1, /*d_dump*/ nodump, /*d_psize*/ nopsize, /*d_flags*/ 0, /*d_maxio*/ 0, /*b_maj*/ -1 }; static struct intr_config_hook *xpt_config_hook; /* Registered busses */ static TAILQ_HEAD(,cam_eb) xpt_busses; static u_int bus_generation; /* Storage for debugging datastructures */ #ifdef CAMDEBUG struct cam_path *cam_dpath; u_int32_t cam_dflags; #endif #if defined(CAM_DEBUG_FLAGS) && !defined(CAMDEBUG) #error "You must have options CAMDEBUG to use options CAM_DEBUG_FLAGS" #endif /* * In order to enable the CAM_DEBUG_* options, the user must have CAMDEBUG * enabled. Also, the user must have either none, or all of CAM_DEBUG_BUS, * CAM_DEBUG_TARGET, and CAM_DEBUG_LUN specified. */ #if defined(CAM_DEBUG_BUS) || defined(CAM_DEBUG_TARGET) \ || defined(CAM_DEBUG_LUN) #ifdef CAMDEBUG #if !defined(CAM_DEBUG_BUS) || !defined(CAM_DEBUG_TARGET) \ || !defined(CAM_DEBUG_LUN) #error "You must define all or none of CAM_DEBUG_BUS, CAM_DEBUG_TARGET \ and CAM_DEBUG_LUN" #endif /* !CAM_DEBUG_BUS || !CAM_DEBUG_TARGET || !CAM_DEBUG_LUN */ #else /* !CAMDEBUG */ #error "You must use options CAMDEBUG if you use the CAM_DEBUG_* options" #endif /* CAMDEBUG */ #endif /* CAM_DEBUG_BUS || CAM_DEBUG_TARGET || CAM_DEBUG_LUN */ /* Our boot-time initialization hook */ static void xpt_init(void *); SYSINIT(cam, SI_SUB_CONFIGURE, SI_ORDER_SECOND, xpt_init, NULL); static cam_status xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id); static void xpt_release_path(struct cam_path *path); static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg); static int xptnextfreebus(path_id_t startbus); static int xptpathid(const char *sim_name, int sim_unit, int sim_bus, path_id_t *nextpath); static union ccb *xpt_get_ccb(struct cam_ed *device); static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo, u_int32_t new_priority); static void xpt_run_dev_allocq(struct cam_eb *bus); static void xpt_run_dev_sendq(struct cam_eb *bus); static timeout_t xpt_release_devq_timeout; static timeout_t xpt_release_simq_timeout; static void xpt_release_bus(struct cam_eb *bus); static struct cam_et* xpt_alloc_target(struct cam_eb *bus, target_id_t target_id); static void xpt_release_target(struct cam_eb *bus, struct cam_et *target); static struct cam_ed* xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static void xpt_release_device(struct cam_eb *bus, struct cam_et *target, struct cam_ed *device); static u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings); static struct cam_eb* xpt_find_bus(path_id_t path_id); static struct cam_et* xpt_find_target(struct cam_eb *bus, target_id_t target_id); static struct cam_ed* xpt_find_device(struct cam_et *target, lun_id_t lun_id); static void xpt_scan_bus(struct cam_periph *periph, union ccb *ccb); static void xpt_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *ccb); static void xptscandone(struct cam_periph *periph, union ccb *done_ccb); static xpt_busfunc_t xptconfigbuscountfunc; static xpt_busfunc_t xptconfigfunc; static void xpt_config(void *arg); static xpt_devicefunc_t xptpassannouncefunc; static void xpt_finishconfig(struct cam_periph *periph, union ccb *ccb); static void xptaction(struct cam_sim *sim, union ccb *work_ccb); static swihand_t swi_camnet; static swihand_t swi_cambio; static void camisr(cam_isrq_t *queue); #if 0 static void xptstart(struct cam_periph *periph, union ccb *work_ccb); static void xptasync(struct cam_periph *periph, u_int32_t code, cam_path *path); #endif static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, int num_patterns, struct cam_eb *bus); static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, int num_patterns, struct cam_ed *device); static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, int num_patterns, struct cam_periph *periph); static xpt_busfunc_t xptedtbusfunc; static xpt_targetfunc_t xptedttargetfunc; static xpt_devicefunc_t xptedtdevicefunc; static xpt_periphfunc_t xptedtperiphfunc; static xpt_pdrvfunc_t xptplistpdrvfunc; static xpt_periphfunc_t xptplistperiphfunc; static int xptedtmatch(struct ccb_dev_match *cdm); static int xptperiphlistmatch(struct ccb_dev_match *cdm); static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg); static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg); static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg); static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg); static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static xpt_busfunc_t xptdefbusfunc; static xpt_targetfunc_t xptdeftargetfunc; static xpt_devicefunc_t xptdefdevicefunc; static xpt_periphfunc_t xptdefperiphfunc; static int xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg); #ifdef notusedyet static int xpt_for_all_targets(xpt_targetfunc_t *tr_func, void *arg); #endif static int xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg); #ifdef notusedyet static int xpt_for_all_periphs(xpt_periphfunc_t *tr_func, void *arg); #endif static xpt_devicefunc_t xptsetasyncfunc; static xpt_busfunc_t xptsetasyncbusfunc; static cam_status xptregister(struct cam_periph *periph, void *arg); static cam_status proberegister(struct cam_periph *periph, void *arg); static void probeschedule(struct cam_periph *probe_periph); static void probestart(struct cam_periph *periph, union ccb *start_ccb); +static void proberequestdefaultnegotiation(struct cam_periph *periph); static void probedone(struct cam_periph *periph, union ccb *done_ccb); static void probecleanup(struct cam_periph *periph); static void xpt_find_quirk(struct cam_ed *device); static void xpt_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_ed *device, int async_update); static void xpt_toggle_tags(struct cam_path *path); static void xpt_start_tags(struct cam_path *path); static __inline int xpt_schedule_dev_allocq(struct cam_eb *bus, struct cam_ed *dev); static __inline int xpt_schedule_dev_sendq(struct cam_eb *bus, struct cam_ed *dev); static __inline int periph_is_queued(struct cam_periph *periph); static __inline int device_is_alloc_queued(struct cam_ed *device); static __inline int device_is_send_queued(struct cam_ed *device); static __inline int dev_allocq_is_runnable(struct cam_devq *devq); static __inline int xpt_schedule_dev_allocq(struct cam_eb *bus, struct cam_ed *dev) { int retval; if (dev->ccbq.devq_openings > 0) { if ((dev->flags & CAM_DEV_RESIZE_QUEUE_NEEDED) != 0) { cam_ccbq_resize(&dev->ccbq, dev->ccbq.dev_openings + dev->ccbq.dev_active); dev->flags &= ~CAM_DEV_RESIZE_QUEUE_NEEDED; } /* * The priority of a device waiting for CCB resources * is that of the the highest priority peripheral driver * enqueued. */ retval = xpt_schedule_dev(&bus->sim->devq->alloc_queue, &dev->alloc_ccb_entry.pinfo, CAMQ_GET_HEAD(&dev->drvq)->priority); } else { retval = 0; } return (retval); } static __inline int xpt_schedule_dev_sendq(struct cam_eb *bus, struct cam_ed *dev) { int retval; if (dev->ccbq.dev_openings > 0) { /* * The priority of a device waiting for controller * resources is that of the the highest priority CCB * enqueued. */ retval = xpt_schedule_dev(&bus->sim->devq->send_queue, &dev->send_ccb_entry.pinfo, CAMQ_GET_HEAD(&dev->ccbq.queue)->priority); } else { retval = 0; } return (retval); } static __inline int periph_is_queued(struct cam_periph *periph) { return (periph->pinfo.index != CAM_UNQUEUED_INDEX); } static __inline int device_is_alloc_queued(struct cam_ed *device) { return (device->alloc_ccb_entry.pinfo.index != CAM_UNQUEUED_INDEX); } static __inline int device_is_send_queued(struct cam_ed *device) { return (device->send_ccb_entry.pinfo.index != CAM_UNQUEUED_INDEX); } static __inline int dev_allocq_is_runnable(struct cam_devq *devq) { /* * Have work to do. * Have space to do more work. * Allowed to do work. */ return ((devq->alloc_queue.qfrozen_cnt == 0) && (devq->alloc_queue.entries > 0) && (devq->alloc_openings > 0)); } static void xpt_periph_init() { dev_t dev; dev = makedev(XPT_CDEV_MAJOR, 0); cdevsw_add(&dev, &xpt_cdevsw, NULL); } static void probe_periph_init() { } static void xptdone(struct cam_periph *periph, union ccb *done_ccb) { /* Caller will release the CCB */ wakeup(&done_ccb->ccb_h.cbfcnp); } static int xptopen(dev_t dev, int flags, int fmt, struct proc *p) { int unit; unit = minor(dev) & 0xff; /* * Only allow read-write access. */ if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0)) return(EPERM); /* * We don't allow nonblocking access. */ if ((flags & O_NONBLOCK) != 0) { printf("xpt%d: can't do nonblocking accesss\n", unit); return(ENODEV); } /* * We only have one transport layer right now. If someone accesses * us via something other than minor number 1, point out their * mistake. */ if (unit != 0) { printf("xptopen: got invalid xpt unit %d\n", unit); return(ENXIO); } /* Mark ourselves open */ xsoftc.flags |= XPT_FLAG_OPEN; return(0); } static int xptclose(dev_t dev, int flag, int fmt, struct proc *p) { int unit; unit = minor(dev) & 0xff; /* * We only have one transport layer right now. If someone accesses * us via something other than minor number 1, point out their * mistake. */ if (unit != 0) { printf("xptclose: got invalid xpt unit %d\n", unit); return(ENXIO); } /* Mark ourselves closed */ xsoftc.flags &= ~XPT_FLAG_OPEN; return(0); } static int xptioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p) { int unit, error; error = 0; unit = minor(dev) & 0xff; /* * We only have one transport layer right now. If someone accesses * us via something other than minor number 1, point out their * mistake. */ if (unit != 0) { printf("xptioctl: got invalid xpt unit %d\n", unit); return(ENXIO); } switch(cmd) { /* * For the transport layer CAMIOCOMMAND ioctl, we really only want * to accept CCB types that don't quite make sense to send through a * passthrough driver. */ case CAMIOCOMMAND: { union ccb *ccb; union ccb *inccb; inccb = (union ccb *)addr; switch(inccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_RESET_BUS: if ((inccb->ccb_h.target_id != CAM_TARGET_WILDCARD) || (inccb->ccb_h.target_lun != CAM_LUN_WILDCARD)) { error = EINVAL; break; } /* FALLTHROUGH */ case XPT_SCAN_LUN: case XPT_RESET_DEV: case XPT_ENG_INQ: /* XXX not implemented yet */ case XPT_ENG_EXEC: ccb = xpt_alloc_ccb(); /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; xpt_free_ccb(ccb); break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(ccb, inccb); ccb->ccb_h.cbfcnp = xptdone; cam_periph_runccb(ccb, NULL, 0, 0, NULL); bcopy(ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); break; case XPT_DEBUG: { union ccb ccb; /* * This is an immediate CCB, so it's okay to * allocate it on the stack. */ /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb.ccb_h.path, xpt_periph, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(&ccb, inccb); ccb.ccb_h.cbfcnp = xptdone; xpt_action(&ccb); bcopy(&ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb.ccb_h.path); break; } case XPT_DEV_MATCH: { struct cam_periph_map_info mapinfo; struct cam_path *old_path; /* * We can't deal with physical addresses for this * type of transaction. */ if (inccb->ccb_h.flags & CAM_DATA_PHYS) { error = EINVAL; break; } /* * Save this in case the caller had it set to * something in particular. */ old_path = inccb->ccb_h.path; /* * We really don't need a path for the matching * code. The path is needed because of the * debugging statements in xpt_action(). They * assume that the CCB has a valid path. */ inccb->ccb_h.path = xpt_periph->path; bzero(&mapinfo, sizeof(mapinfo)); /* * Map the pattern and match buffers into kernel * virtual address space. */ error = cam_periph_mapmem(inccb, &mapinfo); if (error) { inccb->ccb_h.path = old_path; break; } /* * This is an immediate CCB, we can send it on directly. */ xpt_action(inccb); /* * Map the buffers back into user space. */ cam_periph_unmapmem(inccb, &mapinfo); inccb->ccb_h.path = old_path; error = 0; break; } default: error = EINVAL; break; } break; } /* * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input, * with the periphal driver name and unit name filled in. The other * fields don't really matter as input. The passthrough driver name * ("pass"), and unit number are passed back in the ccb. The current * device generation number, and the index into the device peripheral * driver list, and the status are also passed back. Note that * since we do everything in one pass, unlike the XPT_GDEVLIST ccb, * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is * (or rather should be) impossible for the device peripheral driver * list to change since we look at the whole thing in one pass, and * we do it with splcam protection. * */ case CAMGETPASSTHRU: { union ccb *ccb; struct cam_periph *periph; struct periph_driver **p_drv; char *name; int unit; int cur_generation; int base_periph_found; int splbreaknum; int s; ccb = (union ccb *)addr; unit = ccb->cgdl.unit_number; name = ccb->cgdl.periph_name; /* * Every 100 devices, we want to drop our spl protection to * give the software interrupt handler a chance to run. * Most systems won't run into this check, but this should * avoid starvation in the software interrupt handler in * large systems. */ splbreaknum = 100; ccb = (union ccb *)addr; base_periph_found = 0; /* * Sanity check -- make sure we don't get a null peripheral * driver name. */ if (*ccb->cgdl.periph_name == '\0') { error = EINVAL; break; } /* Keep the list from changing while we traverse it */ s = splcam(); ptstartover: cur_generation = xsoftc.generation; /* first find our driver in the list of drivers */ for (p_drv = (struct periph_driver **)periphdriver_set.ls_items; *p_drv != NULL; p_drv++) if (strcmp((*p_drv)->driver_name, name) == 0) break; if (*p_drv == NULL) { splx(s); ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; break; } /* * Run through every peripheral instance of this driver * and check to see whether it matches the unit passed * in by the user. If it does, get out of the loops and * find the passthrough driver associated with that * peripheral driver. */ for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL; periph = TAILQ_NEXT(periph, unit_links)) { if (periph->unit_number == unit) { break; } else if (--splbreaknum == 0) { splx(s); s = splcam(); splbreaknum = 100; if (cur_generation != xsoftc.generation) goto ptstartover; } } /* * If we found the peripheral driver that the user passed * in, go through all of the peripheral drivers for that * particular device and look for a passthrough driver. */ if (periph != NULL) { struct cam_ed *device; int i; base_periph_found = 1; device = periph->path->device; for (i = 0, periph = device->periphs.slh_first; periph != NULL; periph = periph->periph_links.sle_next, i++) { /* * Check to see whether we have a * passthrough device or not. */ if (strcmp(periph->periph_name, "pass") == 0) { /* * Fill in the getdevlist fields. */ strcpy(ccb->cgdl.periph_name, periph->periph_name); ccb->cgdl.unit_number = periph->unit_number; if (periph->periph_links.sle_next) ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; else ccb->cgdl.status = CAM_GDEVLIST_LAST_DEVICE; ccb->cgdl.generation = device->generation; ccb->cgdl.index = i; /* * Fill in some CCB header fields * that the user may want. */ ccb->ccb_h.path_id = periph->path->bus->path_id; ccb->ccb_h.target_id = periph->path->target->target_id; ccb->ccb_h.target_lun = periph->path->device->lun_id; ccb->ccb_h.status = CAM_REQ_CMP; break; } } } /* * If the periph is null here, one of two things has * happened. The first possibility is that we couldn't * find the unit number of the particular peripheral driver * that the user is asking about. e.g. the user asks for * the passthrough driver for "da11". We find the list of * "da" peripherals all right, but there is no unit 11. * The other possibility is that we went through the list * of peripheral drivers attached to the device structure, * but didn't find one with the name "pass". Either way, * we return ENOENT, since we couldn't find something. */ if (periph == NULL) { ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; /* * It is unfortunate that this is even necessary, * but there are many, many clueless users out there. * If this is true, the user is looking for the * passthrough driver, but doesn't have one in his * kernel. */ if (base_periph_found == 1) { printf("xptioctl: pass driver is not in the " "kernel\n"); printf("xptioctl: put \"device pass0\" in " "your kernel config file\n"); } } splx(s); break; } default: error = ENOTTY; break; } return(error); } /* Functions accessed by the peripheral drivers */ static void xpt_init(dummy) void *dummy; { struct cam_sim *xpt_sim; struct cam_path *path; struct cam_devq; cam_status status; TAILQ_INIT(&xpt_busses); TAILQ_INIT(&cam_bioq); TAILQ_INIT(&cam_netq); SLIST_INIT(&ccb_freeq); STAILQ_INIT(&highpowerq); /* * The xpt layer is, itself, the equivelent of a SIM. * Allow 16 ccbs in the ccb pool for it. This should * give decent parallelism when we probe busses and * perform other XPT functions. */ xpt_sim = (struct cam_sim *)malloc(sizeof(*xpt_sim), M_DEVBUF, M_WAITOK); xpt_sim->sim_action = xptaction; xpt_sim->sim_name = "xpt"; xpt_sim->path_id = CAM_XPT_PATH_ID; xpt_sim->bus_id = 0; xpt_sim->max_tagged_dev_openings = 0; xpt_sim->max_dev_openings = 0; xpt_sim->devq = cam_simq_alloc(16); xpt_max_ccbs = 16; xpt_bus_register(xpt_sim, 0); /* * Looking at the XPT from the SIM layer, the XPT is * the equivelent of a peripheral driver. Allocate * a peripheral driver entry for us. */ if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)) != CAM_REQ_CMP) { printf("xpt_init: xpt_create_path failed with status %#x," " failing attach\n", status); return; } cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO, path, NULL, 0, NULL); xpt_free_path(path); xpt_sim->softc = xpt_periph; /* * Register a callback for when interrupts are enabled. */ xpt_config_hook = (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook), M_TEMP, M_NOWAIT); if (xpt_config_hook == NULL) { printf("xpt_init: Cannot malloc config hook " "- failing attach\n"); return; } bzero(xpt_config_hook, sizeof(*xpt_config_hook)); xpt_config_hook->ich_func = xpt_config; if (config_intrhook_establish(xpt_config_hook) != 0) { free (xpt_config_hook, M_TEMP); printf("xpt_init: config_intrhook_establish failed " "- failing attach\n"); } /* Install our software interrupt handlers */ register_swi(SWI_CAMNET, swi_camnet); register_swi(SWI_CAMBIO, swi_cambio); } static cam_status xptregister(struct cam_periph *periph, void *arg) { if (periph == NULL) { printf("xptregister: periph was NULL!!\n"); return(CAM_REQ_CMP_ERR); } periph->softc = NULL; xpt_periph = periph; return(CAM_REQ_CMP); } int32_t xpt_add_periph(struct cam_periph *periph) { struct cam_ed *device; int32_t status; struct periph_list *periph_head; device = periph->path->device; periph_head = &device->periphs; status = CAM_REQ_CMP; if (device != NULL) { int s; /* * Make room for this peripheral * so it will fit in the queue * when it's scheduled to run */ s = splsoftcam(); status = camq_resize(&device->drvq, device->drvq.array_size + 1); device->generation++; SLIST_INSERT_HEAD(periph_head, periph, periph_links); splx(s); } xsoftc.generation++; return (status); } void xpt_remove_periph(struct cam_periph *periph) { struct cam_ed *device; device = periph->path->device; if (device != NULL) { int s; struct periph_list *periph_head; periph_head = &device->periphs; /* Release the slot for this peripheral */ s = splsoftcam(); camq_resize(&device->drvq, device->drvq.array_size - 1); device->generation++; SLIST_REMOVE(periph_head, periph, cam_periph, periph_links); splx(s); } xsoftc.generation++; } void xpt_announce_periph(struct cam_periph *periph, char *announce_string) { int s; u_int mb; struct cam_path *path; struct ccb_trans_settings cts; path = periph->path; /* * To ensure that this is printed in one piece, * mask out CAM interrupts. */ s = splsoftcam(); printf("%s%d at %s%d bus %d target %d lun %d\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->target->target_id, path->device->lun_id); printf("%s%d: ", periph->periph_name, periph->unit_number); scsi_print_inquiry(&path->device->inq_data); if ((bootverbose) && (path->device->serial_num_len > 0)) { /* Don't wrap the screen - print only the first 60 chars */ printf("%s%d: Serial Number %.60s\n", periph->periph_name, periph->unit_number, path->device->serial_num); } xpt_setup_ccb(&cts.ccb_h, path, /*priority*/1); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.flags = CCB_TRANS_CURRENT_SETTINGS; xpt_action((union ccb*)&cts); if (cts.ccb_h.status == CAM_REQ_CMP) { u_int speed; u_int freq; if ((cts.valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0 && cts.sync_offset != 0) { freq = scsi_calc_syncsrate(cts.sync_period); speed = freq; } else { struct ccb_pathinq cpi; /* Ask the SIM for its base transfer speed */ xpt_setup_ccb(&cpi.ccb_h, path, /*priority*/1); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); speed = cpi.base_transfer_speed; freq = 0; } if ((cts.valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) speed *= (0x01 << cts.bus_width); mb = speed / 1000; if (mb > 0) printf("%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else printf("%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, (speed % 1000) * 1000); if ((cts.valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0 && cts.sync_offset != 0) { printf(" (%d.%03dMHz, offset %d", freq / 1000, freq % 1000, cts.sync_offset); } if ((cts.valid & CCB_TRANS_BUS_WIDTH_VALID) != 0 && cts.bus_width > 0) { if ((cts.valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0 && cts.sync_offset != 0) { printf(", "); } else { printf(" ("); } printf("%dbit)", 8 * (0x01 << cts.bus_width)); } else if ((cts.valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0 && cts.sync_offset != 0) { printf(")"); } if (path->device->inq_flags & SID_CmdQue || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) { printf(", Tagged Queueing Enabled"); } printf("\n"); } else if (path->device->inq_flags & SID_CmdQue || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) { printf("%s%d: Tagged Queueing Enabled\n", periph->periph_name, periph->unit_number); } /* * We only want to print the caller's announce string if they've * passed one in.. */ if (announce_string != NULL) printf("%s%d: %s\n", periph->periph_name, periph->unit_number, announce_string); splx(s); } static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, int num_patterns, struct cam_eb *bus) { dev_match_ret retval; int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (bus == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this bus matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct bus_match_pattern *cur_pattern; /* * If the pattern in question isn't for a bus node, we * aren't interested. However, we do indicate to the * calling routine that we should continue descending the * tree, since the user wants to match against lower-level * EDT elements. */ if (patterns[i].type != DEV_MATCH_BUS) { if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.bus_pattern; /* * If they want to match any bus node, we give them any * device node. */ if (cur_pattern->flags == BUS_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * If we've already decided on an action, go ahead * and return. */ if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE) return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == BUS_MATCH_NONE) continue; if (((cur_pattern->flags & BUS_MATCH_PATH) != 0) && (cur_pattern->path_id != bus->path_id)) continue; if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0) && (cur_pattern->bus_id != bus->sim->bus_id)) continue; if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0) && (cur_pattern->unit_number != bus->sim->unit_number)) continue; if (((cur_pattern->flags & BUS_MATCH_NAME) != 0) && (strncmp(cur_pattern->dev_name, bus->sim->sim_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this bus. So tell the caller to copy the * data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a non-bus matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a non-bus * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen anything other than bus matching patterns. So * tell the caller to stop descending the tree -- the user doesn't * want to match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, int num_patterns, struct cam_ed *device) { dev_match_ret retval; int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (device == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this device matches no * matter what. */ if ((patterns == NULL) || (patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct device_match_pattern *cur_pattern; /* * If the pattern in question isn't for a device node, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_DEVICE) { if ((patterns[i].type == DEV_MATCH_PERIPH) && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.device_pattern; /* * If they want to match any device node, we give them any * device node. */ if (cur_pattern->flags == DEV_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * If we've already decided on an action, go ahead * and return. */ if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE) return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == DEV_MATCH_NONE) continue; if (((cur_pattern->flags & DEV_MATCH_PATH) != 0) && (cur_pattern->path_id != device->target->bus->path_id)) continue; if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0) && (cur_pattern->target_id != device->target->target_id)) continue; if (((cur_pattern->flags & DEV_MATCH_LUN) != 0) && (cur_pattern->target_lun != device->lun_id)) continue; if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0) && (cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)&cur_pattern->inq_pat, 1, sizeof(cur_pattern->inq_pat), scsi_static_inquiry_match) == NULL)) continue; /* * If we get to this point, the user definitely wants * information on this device. So tell the caller to copy * the data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a peripheral matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a peripheral * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen any peripheral matching patterns. So tell the * caller to stop descending the tree -- the user doesn't want to * match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } /* * Match a single peripheral against any number of match patterns. */ static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, int num_patterns, struct cam_periph *periph) { dev_match_ret retval; int i; /* * If we aren't given something to match against, that's an error. */ if (periph == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this peripheral matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_STOP | DM_RET_COPY); /* * There aren't any nodes below a peripheral node, so there's no * reason to descend the tree any further. */ retval = DM_RET_STOP; for (i = 0; i < num_patterns; i++) { struct periph_match_pattern *cur_pattern; /* * If the pattern in question isn't for a peripheral, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_PERIPH) continue; cur_pattern = &patterns[i].pattern.periph_pattern; /* * If they want to match on anything, then we will do so. */ if (cur_pattern->flags == PERIPH_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * We've already set the return action to stop, * since there are no nodes below peripherals in * the tree. */ return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == PERIPH_MATCH_NONE) continue; if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0) && (cur_pattern->path_id != periph->path->bus->path_id)) continue; /* * For the target and lun id's, we have to make sure the * target and lun pointers aren't NULL. The xpt peripheral * has a wildcard target and device. */ if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0) && ((periph->path->target == NULL) ||(cur_pattern->target_id != periph->path->target->target_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0) && ((periph->path->device == NULL) || (cur_pattern->target_lun != periph->path->device->lun_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0) && (cur_pattern->unit_number != periph->unit_number)) continue; if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0) && (strncmp(cur_pattern->periph_name, periph->periph_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this peripheral. So tell the caller to * copy the data out. */ retval |= DM_RET_COPY; /* * The return action has already been set to stop, since * peripherals don't have any nodes below them in the EDT. */ return(retval); } /* * If we get to this point, the peripheral that was passed in * doesn't match any of the patterns. */ return(retval); } static int xptedtbusfunc(struct cam_eb *bus, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) retval = DM_RET_DESCEND; else retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus); /* * If we got an error, bail out of the search. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this bus out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS; cdm->pos.cookie.bus = bus; cdm->pos.generations[CAM_BUS_GENERATION]= bus_generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_BUS; cdm->matches[j].result.bus_result.path_id = bus->path_id; cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id; cdm->matches[j].result.bus_result.unit_number = bus->sim->unit_number; strncpy(cdm->matches[j].result.bus_result.dev_name, bus->sim->sim_name, DEV_IDLEN); } /* * If the user is only interested in busses, there's no * reason to descend to the next level in the tree. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a target generation recorded, check it to * make sure the target list hasn't changed. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (bus == cdm->pos.cookie.bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.generations[CAM_TARGET_GENERATION] != 0) && (cdm->pos.generations[CAM_TARGET_GENERATION] != bus->generation)) { cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) return(xpttargettraverse(bus, (struct cam_et *)cdm->pos.cookie.target, xptedttargetfunc, arg)); else return(xpttargettraverse(bus, NULL, xptedttargetfunc, arg)); } static int xptedttargetfunc(struct cam_et *target, void *arg) { struct ccb_dev_match *cdm; cdm = (struct ccb_dev_match *)arg; /* * If there is a device list generation recorded, check it to * make sure the device list hasn't changed. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == target->bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.generations[CAM_DEV_GENERATION] != 0) && (cdm->pos.generations[CAM_DEV_GENERATION] != target->generation)) { cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == target->bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device != NULL)) return(xptdevicetraverse(target, (struct cam_ed *)cdm->pos.cookie.device, xptedtdevicefunc, arg)); else return(xptdevicetraverse(target, NULL, xptedtdevicefunc, arg)); } static int xptedtdevicefunc(struct cam_ed *device, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) retval = DM_RET_DESCEND; else retval = xptdevicematch(cdm->patterns, cdm->num_patterns, device); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this device out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE; cdm->pos.cookie.bus = device->target->bus; cdm->pos.generations[CAM_BUS_GENERATION]= bus_generation; cdm->pos.cookie.target = device->target; cdm->pos.generations[CAM_TARGET_GENERATION] = device->target->bus->generation; cdm->pos.cookie.device = device; cdm->pos.generations[CAM_DEV_GENERATION] = device->target->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_DEVICE; cdm->matches[j].result.device_result.path_id = device->target->bus->path_id; cdm->matches[j].result.device_result.target_id = device->target->target_id; cdm->matches[j].result.device_result.target_lun = device->lun_id; bcopy(&device->inq_data, &cdm->matches[j].result.device_result.inq_data, sizeof(struct scsi_inquiry_data)); /* Let the user know whether this device is unconfigured */ if (device->flags & CAM_DEV_UNCONFIGURED) cdm->matches[j].result.device_result.flags = DEV_RESULT_UNCONFIGURED; else cdm->matches[j].result.device_result.flags = DEV_RESULT_NOFLAG; } /* * If the user isn't interested in peripherals, don't descend * the tree any further. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a peripheral list generation recorded, make sure * it hasn't changed. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (device->target->bus == cdm->pos.cookie.bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (device->target == cdm->pos.cookie.target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (device == cdm->pos.cookie.device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.generations[CAM_PERIPH_GENERATION] != 0) && (cdm->pos.generations[CAM_PERIPH_GENERATION] != device->generation)){ cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == device->target->bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == device->target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) return(xptperiphtraverse(device, (struct cam_periph *)cdm->pos.cookie.periph, xptedtperiphfunc, arg)); else return(xptperiphtraverse(device, NULL, xptedtperiphfunc, arg)); } static int xptedtperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE | CAM_DEV_POS_PERIPH; cdm->pos.cookie.bus = periph->path->bus; cdm->pos.generations[CAM_BUS_GENERATION]= bus_generation; cdm->pos.cookie.target = periph->path->target; cdm->pos.generations[CAM_TARGET_GENERATION] = periph->path->bus->generation; cdm->pos.cookie.device = periph->path->device; cdm->pos.generations[CAM_DEV_GENERATION] = periph->path->target->generation; cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = periph->path->device->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; strncpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, DEV_IDLEN); } return(1); } static int xptedtmatch(struct ccb_dev_match *cdm) { int ret; cdm->num_matches = 0; /* * Check the bus list generation. If it has changed, the user * needs to reset everything and start over. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.generations[CAM_BUS_GENERATION] != 0) && (cdm->pos.generations[CAM_BUS_GENERATION] != bus_generation)) { cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus != NULL)) ret = xptbustraverse((struct cam_eb *)cdm->pos.cookie.bus, xptedtbusfunc, cdm); else ret = xptbustraverse(NULL, xptedtbusfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the EDT. It also means that one of the subroutines * has set the status field to the proper value. If we get back 1, * we've fully traversed the EDT and copied out any matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptplistpdrvfunc(struct periph_driver **pdrv, void *arg) { struct ccb_dev_match *cdm; cdm = (struct ccb_dev_match *)arg; if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv == pdrv) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.generations[CAM_PERIPH_GENERATION] != 0) && (cdm->pos.generations[CAM_PERIPH_GENERATION] != (*pdrv)->generation)) { cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv == pdrv) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) return(xptpdperiphtraverse(pdrv, (struct cam_periph *)cdm->pos.cookie.periph, xptplistperiphfunc, arg)); else return(xptpdperiphtraverse(pdrv, NULL,xptplistperiphfunc, arg)); } static int xptplistperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { struct periph_driver **pdrv; pdrv = NULL; bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR | CAM_DEV_POS_PERIPH; /* * This may look a bit non-sensical, but it is * actually quite logical. There are very few * peripheral drivers, and bloating every peripheral * structure with a pointer back to its parent * peripheral driver linker set entry would cost * more in the long run than doing this quick lookup. */ for (pdrv = (struct periph_driver **)periphdriver_set.ls_items; *pdrv != NULL; pdrv++) { if (strcmp((*pdrv)->driver_name, periph->periph_name) == 0) break; } if (pdrv == NULL) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } cdm->pos.cookie.pdrv = pdrv; /* * The periph generation slot does double duty, as * does the periph pointer slot. They are used for * both edt and pdrv lookups and positioning. */ cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = (*pdrv)->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; /* * The transport layer peripheral doesn't have a target or * lun. */ if (periph->path->target) cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; else cdm->matches[j].result.periph_result.target_id = -1; if (periph->path->device) cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; else cdm->matches[j].result.periph_result.target_lun = -1; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; strncpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, DEV_IDLEN); } return(1); } static int xptperiphlistmatch(struct ccb_dev_match *cdm) { int ret; cdm->num_matches = 0; /* * At this point in the edt traversal function, we check the bus * list generation to make sure that no busses have been added or * removed since the user last sent a XPT_DEV_MATCH ccb through. * For the peripheral driver list traversal function, however, we * don't have to worry about new peripheral driver types coming or * going; they're in a linker set, and therefore can't change * without a recompile. */ if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv != NULL)) ret = xptpdrvtraverse( (struct periph_driver **)cdm->pos.cookie.pdrv, xptplistpdrvfunc, cdm); else ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the peripheral driver tree. It also means that one of * the subroutines has set the status field to the proper value. If * we get back 1, we've fully traversed the EDT and copied out any * matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg) { struct cam_eb *bus, *next_bus; int retval; retval = 1; for (bus = (start_bus ? start_bus : TAILQ_FIRST(&xpt_busses)); bus != NULL; bus = next_bus) { next_bus = TAILQ_NEXT(bus, links); retval = tr_func(bus, arg); if (retval == 0) return(retval); } return(retval); } static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg) { struct cam_et *target, *next_target; int retval; retval = 1; for (target = (start_target ? start_target : TAILQ_FIRST(&bus->et_entries)); target != NULL; target = next_target) { next_target = TAILQ_NEXT(target, links); retval = tr_func(target, arg); if (retval == 0) return(retval); } return(retval); } static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg) { struct cam_ed *device, *next_device; int retval; retval = 1; for (device = (start_device ? start_device : TAILQ_FIRST(&target->ed_entries)); device != NULL; device = next_device) { next_device = TAILQ_NEXT(device, links); retval = tr_func(device, arg); if (retval == 0) return(retval); } return(retval); } static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_periph *periph, *next_periph; int retval; retval = 1; for (periph = (start_periph ? start_periph : SLIST_FIRST(&device->periphs)); periph != NULL; periph = next_periph) { next_periph = SLIST_NEXT(periph, periph_links); retval = tr_func(periph, arg); if (retval == 0) return(retval); } return(retval); } static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg) { struct periph_driver **pdrv; int retval; retval = 1; /* * We don't traverse the peripheral driver list like we do the * other lists, because it is a linker set, and therefore cannot be * changed during runtime. If the peripheral driver list is ever * re-done to be something other than a linker set (i.e. it can * change while the system is running), the list traversal should * be modified to work like the other traversal functions. */ for (pdrv = (start_pdrv ? start_pdrv : (struct periph_driver **)periphdriver_set.ls_items); *pdrv != NULL; pdrv++) { retval = tr_func(pdrv, arg); if (retval == 0) return(retval); } return(retval); } static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_periph *periph, *next_periph; int retval; retval = 1; for (periph = (start_periph ? start_periph : TAILQ_FIRST(&(*pdrv)->units)); periph != NULL; periph = next_periph) { next_periph = TAILQ_NEXT(periph, unit_links); retval = tr_func(periph, arg); if (retval == 0) return(retval); } return(retval); } static int xptdefbusfunc(struct cam_eb *bus, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_BUS) { xpt_busfunc_t *tr_func; tr_func = (xpt_busfunc_t *)tr_config->tr_func; return(tr_func(bus, tr_config->tr_arg)); } else return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg)); } static int xptdeftargetfunc(struct cam_et *target, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_TARGET) { xpt_targetfunc_t *tr_func; tr_func = (xpt_targetfunc_t *)tr_config->tr_func; return(tr_func(target, tr_config->tr_arg)); } else return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg)); } static int xptdefdevicefunc(struct cam_ed *device, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_DEVICE) { xpt_devicefunc_t *tr_func; tr_func = (xpt_devicefunc_t *)tr_config->tr_func; return(tr_func(device, tr_config->tr_arg)); } else return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg)); } static int xptdefperiphfunc(struct cam_periph *periph, void *arg) { struct xpt_traverse_config *tr_config; xpt_periphfunc_t *tr_func; tr_config = (struct xpt_traverse_config *)arg; tr_func = (xpt_periphfunc_t *)tr_config->tr_func; /* * Unlike the other default functions, we don't check for depth * here. The peripheral driver level is the last level in the EDT, * so if we're here, we should execute the function in question. */ return(tr_func(periph, tr_config->tr_arg)); } /* * Execute the given function for every bus in the EDT. */ static int xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_BUS; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } #ifdef notusedyet /* * Execute the given function for every target in the EDT. */ static int xpt_for_all_targets(xpt_targetfunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_TARGET; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } #endif /* notusedyet */ /* * Execute the given function for every device in the EDT. */ static int xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_DEVICE; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } #ifdef notusedyet /* * Execute the given function for every peripheral in the EDT. */ static int xpt_for_all_periphs(xpt_periphfunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_PERIPH; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } #endif /* notusedyet */ static int xptsetasyncfunc(struct cam_ed *device, void *arg) { struct cam_path path; struct ccb_getdev cgd; struct async_node *cur_entry; cur_entry = (struct async_node *)arg; /* * Don't report unconfigured devices (Wildcard devs, * devices only for target mode, device instances * that have been invalidated but are waiting for * their last reference count to be released). */ if ((device->flags & CAM_DEV_UNCONFIGURED) != 0) return (1); xpt_compile_path(&path, NULL, device->target->bus->path_id, device->target->target_id, device->lun_id); xpt_setup_ccb(&cgd.ccb_h, &path, /*priority*/1); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); cur_entry->callback(cur_entry->callback_arg, AC_FOUND_DEVICE, &path, &cgd); xpt_release_path(&path); return(1); } static int xptsetasyncbusfunc(struct cam_eb *bus, void *arg) { struct cam_path path; struct ccb_pathinq cpi; struct async_node *cur_entry; cur_entry = (struct async_node *)arg; xpt_compile_path(&path, /*periph*/NULL, bus->sim->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); xpt_setup_ccb(&cpi.ccb_h, &path, /*priority*/1); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); cur_entry->callback(cur_entry->callback_arg, AC_PATH_REGISTERED, &path, &cpi); xpt_release_path(&path); return(1); } void xpt_action(union ccb *start_ccb) { CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action\n")); start_ccb->ccb_h.status = CAM_REQ_INPROG; switch (start_ccb->ccb_h.func_code) { case XPT_SCSI_IO: { #ifdef CAMDEBUG char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1]; struct cam_path *path; path = start_ccb->ccb_h.path; #endif /* * For the sake of compatibility with SCSI-1 * devices that may not understand the identify * message, we include lun information in the * second byte of all commands. SCSI-1 specifies * that luns are a 3 bit value and reserves only 3 * bits for lun information in the CDB. Later * revisions of the SCSI spec allow for more than 8 * luns, but have deprecated lun information in the * CDB. So, if the lun won't fit, we must omit. * * Also be aware that during initial probing for devices, * the inquiry information is unknown but initialized to 0. * This means that this code will be exercised while probing * devices with an ANSI revision greater than 2. */ if (SID_ANSI_REV(&start_ccb->ccb_h.path->device->inq_data) <= 2 && start_ccb->ccb_h.target_lun < 8 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) { start_ccb->csio.cdb_io.cdb_bytes[1] |= start_ccb->ccb_h.target_lun << 5; } start_ccb->csio.scsi_status = SCSI_STATUS_OK; start_ccb->csio.sense_resid = 0; start_ccb->csio.resid = 0; CAM_DEBUG(path, CAM_DEBUG_CDB,("%s. CDB: %s\n", scsi_op_desc(start_ccb->csio.cdb_io.cdb_bytes[0], &path->device->inq_data), scsi_cdb_string(start_ccb->csio.cdb_io.cdb_bytes, cdb_str, sizeof(cdb_str)))); /* FALLTRHOUGH */ } case XPT_TARGET_IO: case XPT_CONT_TARGET_IO: case XPT_ENG_EXEC: { struct cam_path *path; int s; int runq; path = start_ccb->ccb_h.path; s = splsoftcam(); cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb); if (path->device->qfrozen_cnt == 0) runq = xpt_schedule_dev_sendq(path->bus, path->device); else runq = 0; splx(s); if (runq != 0) xpt_run_dev_sendq(path->bus); break; } case XPT_SET_TRAN_SETTINGS: { xpt_set_transfer_settings(&start_ccb->cts, start_ccb->ccb_h.path->device, /*async_update*/FALSE); break; } case XPT_CALC_GEOMETRY: /* Filter out garbage */ if (start_ccb->ccg.block_size == 0 || start_ccb->ccg.volume_size == 0) { start_ccb->ccg.cylinders = 0; start_ccb->ccg.heads = 0; start_ccb->ccg.secs_per_track = 0; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } #ifdef PC98 /* * In a PC-98 system, geometry translation depens on * the "real" device geometry obtained from mode page 4. * SCSI geometry translation is performed in the * initialization routine of the SCSI BIOS and the result * stored in host memory. If the translation is available * in host memory, use it. If not, rely on the default * translation the device driver performs. */ if (scsi_da_bios_params(&start_ccb->ccg) != 0) { start_ccb->ccb_h.status = CAM_REQ_CMP; break; } /* FALLTHROUGH */ #endif case XPT_ABORT: case XPT_RESET_DEV: case XPT_ACCEPT_TARGET_IO: case XPT_EN_LUN: case XPT_IMMED_NOTIFY: case XPT_NOTIFY_ACK: case XPT_GET_TRAN_SETTINGS: - case XPT_PATH_INQ: case XPT_RESET_BUS: { struct cam_sim *sim; sim = start_ccb->ccb_h.path->bus->sim; (*(sim->sim_action))(sim, start_ccb); break; } + case XPT_PATH_INQ: + { + struct cam_sim *sim; + + sim = start_ccb->ccb_h.path->bus->sim; + (*(sim->sim_action))(sim, start_ccb); + break; + } + case XPT_PATH_STATS: + start_ccb->cpis.last_reset = + start_ccb->ccb_h.path->bus->last_reset; + start_ccb->ccb_h.status = CAM_REQ_CMP; + break; case XPT_GDEV_TYPE: { + struct cam_ed *dev; int s; + dev = start_ccb->ccb_h.path->device; s = splcam(); - if ((start_ccb->ccb_h.path->device->flags & CAM_DEV_UNCONFIGURED) != 0) { + if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) { start_ccb->ccb_h.status = CAM_DEV_NOT_THERE; } else { struct ccb_getdev *cgd; + struct cam_eb *bus; struct cam_et *tar; - struct cam_ed *dev; cgd = &start_ccb->cgd; + bus = cgd->ccb_h.path->bus; tar = cgd->ccb_h.path->target; - dev = cgd->ccb_h.path->device; cgd->inq_data = dev->inq_data; cgd->pd_type = SID_TYPE(&dev->inq_data); cgd->dev_openings = dev->ccbq.dev_openings; cgd->dev_active = dev->ccbq.dev_active; cgd->devq_openings = dev->ccbq.devq_openings; cgd->devq_queued = dev->ccbq.queue.entries; cgd->held = dev->ccbq.held; cgd->maxtags = dev->quirk->maxtags; cgd->mintags = dev->quirk->mintags; cgd->ccb_h.status = CAM_REQ_CMP; cgd->serial_num_len = dev->serial_num_len; if ((dev->serial_num_len > 0) && (dev->serial_num != NULL)) bcopy(dev->serial_num, cgd->serial_num, dev->serial_num_len); } splx(s); break; } + case XPT_GDEV_STATS: + { + struct cam_ed *dev; + int s; + + dev = start_ccb->ccb_h.path->device; + s = splcam(); + if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) { + start_ccb->ccb_h.status = CAM_DEV_NOT_THERE; + } else { + struct ccb_getdevstats *cgds; + struct cam_eb *bus; + struct cam_et *tar; + + cgds = &start_ccb->cgds; + bus = cgds->ccb_h.path->bus; + tar = cgds->ccb_h.path->target; + cgds->dev_openings = dev->ccbq.dev_openings; + cgds->dev_active = dev->ccbq.dev_active; + cgds->devq_openings = dev->ccbq.devq_openings; + cgds->devq_queued = dev->ccbq.queue.entries; + cgds->held = dev->ccbq.held; + cgds->last_reset = tar->last_reset; + if (timevalcmp(&tar->last_reset, &bus->last_reset, <)) + cgds->last_reset = bus->last_reset; + cgds->ccb_h.status = CAM_REQ_CMP; + } + splx(s); + break; + } case XPT_GDEVLIST: { struct cam_periph *nperiph; struct periph_list *periph_head; struct ccb_getdevlist *cgdl; int i; int s; struct cam_ed *device; int found; found = 0; /* * Don't want anyone mucking with our data. */ s = splcam(); device = start_ccb->ccb_h.path->device; periph_head = &device->periphs; cgdl = &start_ccb->cgdl; /* * Check and see if the list has changed since the user * last requested a list member. If so, tell them that the * list has changed, and therefore they need to start over * from the beginning. */ if ((cgdl->index != 0) && (cgdl->generation != device->generation)) { cgdl->status = CAM_GDEVLIST_LIST_CHANGED; splx(s); break; } /* * Traverse the list of peripherals and attempt to find * the requested peripheral. */ for (nperiph = periph_head->slh_first, i = 0; (nperiph != NULL) && (i <= cgdl->index); nperiph = nperiph->periph_links.sle_next, i++) { if (i == cgdl->index) { strncpy(cgdl->periph_name, nperiph->periph_name, DEV_IDLEN); cgdl->unit_number = nperiph->unit_number; found = 1; } } if (found == 0) { cgdl->status = CAM_GDEVLIST_ERROR; splx(s); break; } if (nperiph == NULL) cgdl->status = CAM_GDEVLIST_LAST_DEVICE; else cgdl->status = CAM_GDEVLIST_MORE_DEVS; cgdl->index++; cgdl->generation = device->generation; splx(s); cgdl->ccb_h.status = CAM_REQ_CMP; break; } case XPT_DEV_MATCH: { int s; dev_pos_type position_type; struct ccb_dev_match *cdm; int ret; cdm = &start_ccb->cdm; /* * Prevent EDT changes while we traverse it. */ s = splcam(); /* * There are two ways of getting at information in the EDT. * The first way is via the primary EDT tree. It starts * with a list of busses, then a list of targets on a bus, * then devices/luns on a target, and then peripherals on a * device/lun. The "other" way is by the peripheral driver * lists. The peripheral driver lists are organized by * peripheral driver. (obviously) So it makes sense to * use the peripheral driver list if the user is looking * for something like "da1", or all "da" devices. If the * user is looking for something on a particular bus/target * or lun, it's generally better to go through the EDT tree. */ if (cdm->pos.position_type != CAM_DEV_POS_NONE) position_type = cdm->pos.position_type; else { int i; position_type = CAM_DEV_POS_NONE; for (i = 0; i < cdm->num_patterns; i++) { if ((cdm->patterns[i].type == DEV_MATCH_BUS) ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){ position_type = CAM_DEV_POS_EDT; break; } } if (cdm->num_patterns == 0) position_type = CAM_DEV_POS_EDT; else if (position_type == CAM_DEV_POS_NONE) position_type = CAM_DEV_POS_PDRV; } switch(position_type & CAM_DEV_POS_TYPEMASK) { case CAM_DEV_POS_EDT: ret = xptedtmatch(cdm); break; case CAM_DEV_POS_PDRV: ret = xptperiphlistmatch(cdm); break; default: cdm->status = CAM_DEV_MATCH_ERROR; break; } splx(s); if (cdm->status == CAM_DEV_MATCH_ERROR) start_ccb->ccb_h.status = CAM_REQ_CMP_ERR; else start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_SASYNC_CB: { struct ccb_setasync *csa; struct async_node *cur_entry; struct async_list *async_head; u_int32_t added; int s; csa = &start_ccb->csa; added = csa->event_enable; async_head = &csa->ccb_h.path->device->asyncs; /* * If there is already an entry for us, simply * update it. */ s = splcam(); cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { if ((cur_entry->callback_arg == csa->callback_arg) && (cur_entry->callback == csa->callback)) break; cur_entry = SLIST_NEXT(cur_entry, links); } if (cur_entry != NULL) { /* * If the request has no flags set, * remove the entry. */ added &= ~cur_entry->event_enable; if (csa->event_enable == 0) { SLIST_REMOVE(async_head, cur_entry, async_node, links); csa->ccb_h.path->device->refcount--; free(cur_entry, M_DEVBUF); } else { cur_entry->event_enable = csa->event_enable; } } else { cur_entry = malloc(sizeof(*cur_entry), M_DEVBUF, M_NOWAIT); if (cur_entry == NULL) { splx(s); csa->ccb_h.status = CAM_RESRC_UNAVAIL; break; } cur_entry->callback_arg = csa->callback_arg; cur_entry->callback = csa->callback; cur_entry->event_enable = csa->event_enable; SLIST_INSERT_HEAD(async_head, cur_entry, links); csa->ccb_h.path->device->refcount++; } if ((added & AC_FOUND_DEVICE) != 0) { /* * Get this peripheral up to date with all * the currently existing devices. */ xpt_for_all_devices(xptsetasyncfunc, cur_entry); } if ((added & AC_PATH_REGISTERED) != 0) { /* * Get this peripheral up to date with all * the currently existing busses. */ xpt_for_all_busses(xptsetasyncbusfunc, cur_entry); } splx(s); start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_REL_SIMQ: { struct ccb_relsim *crs; struct cam_ed *dev; int s; crs = &start_ccb->crs; dev = crs->ccb_h.path->device; if (dev == NULL) { crs->ccb_h.status = CAM_DEV_NOT_THERE; break; } s = splcam(); if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) { if ((dev->inq_data.flags & SID_CmdQue) != 0) { /* Don't ever go below one opening */ if (crs->openings > 0) { xpt_dev_ccbq_resize(crs->ccb_h.path, crs->openings); if (bootverbose) { xpt_print_path(crs->ccb_h.path); printf("tagged openings " "now %d\n", crs->openings); } } } } if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) { if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { /* * Just extend the old timeout and decrement * the freeze count so that a single timeout * is sufficient for releasing the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; untimeout(xpt_release_devq_timeout, dev, dev->c_handle); } else { start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } dev->c_handle = timeout(xpt_release_devq_timeout, dev, (crs->release_timeout * hz) / 1000); dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING; } if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) { if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) { /* * Decrement the freeze count so that a single * completion is still sufficient to unfreeze * the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_COMPLETE; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) { if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 || (dev->ccbq.dev_active == 0)) { start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } splx(s); if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0) { xpt_release_devq(crs->ccb_h.path->device, /*run_queue*/TRUE); } start_ccb->crs.qfrozen_cnt = dev->qfrozen_cnt; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_SCAN_BUS: xpt_scan_bus(start_ccb->ccb_h.path->periph, start_ccb); break; case XPT_SCAN_LUN: xpt_scan_lun(start_ccb->ccb_h.path->periph, start_ccb->ccb_h.path, start_ccb->crcn.flags, start_ccb); break; case XPT_DEBUG: { #ifdef CAMDEBUG int s; s = splcam(); cam_dflags = start_ccb->cdbg.flags; if (cam_dpath != NULL) { xpt_free_path(cam_dpath); cam_dpath = NULL; } if (cam_dflags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, xpt_periph, start_ccb->ccb_h.path_id, start_ccb->ccb_h.target_id, start_ccb->ccb_h.target_lun) != CAM_REQ_CMP) { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; cam_dflags = CAM_DEBUG_NONE; } else { start_ccb->ccb_h.status = CAM_REQ_CMP; xpt_print_path(cam_dpath); printf("debugging flags now %x\n", cam_dflags); } } else { cam_dpath = NULL; start_ccb->ccb_h.status = CAM_REQ_CMP; } splx(s); #else /* !CAMDEBUG */ start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; #endif /* CAMDEBUG */ break; } case XPT_NOOP: + if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) + xpt_freeze_devq(start_ccb->ccb_h.path, 1); start_ccb->ccb_h.status = CAM_REQ_CMP; break; default: case XPT_SDEV_TYPE: case XPT_TERM_IO: case XPT_ENG_INQ: /* XXX Implement */ start_ccb->ccb_h.status = CAM_PROVIDE_FAIL; break; } } void xpt_polled_action(union ccb *start_ccb) { int s; u_int32_t timeout; struct cam_sim *sim; struct cam_devq *devq; struct cam_ed *dev; timeout = start_ccb->ccb_h.timeout; sim = start_ccb->ccb_h.path->bus->sim; devq = sim->devq; dev = start_ccb->ccb_h.path->device; s = splcam(); /* * Steal an opening so that no other queued requests * can get it before us while we simulate interrupts. */ dev->ccbq.devq_openings--; dev->ccbq.dev_openings--; while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) && (--timeout > 0)) { DELAY(1000); (*(sim->sim_poll))(sim); swi_camnet(); swi_cambio(); } dev->ccbq.devq_openings++; dev->ccbq.dev_openings++; if (timeout != 0) { xpt_action(start_ccb); while(--timeout > 0) { (*(sim->sim_poll))(sim); swi_camnet(); swi_cambio(); if ((start_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) break; DELAY(1000); } if (timeout == 0) { /* * XXX Is it worth adding a sim_timeout entry * point so we can attempt recovery? If * this is only used for dumps, I don't think * it is. */ start_ccb->ccb_h.status = CAM_CMD_TIMEOUT; } } else { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; } splx(s); } /* * Schedule a peripheral driver to receive a ccb when it's * target device has space for more transactions. */ void xpt_schedule(struct cam_periph *perph, u_int32_t new_priority) { struct cam_ed *device; int s; int runq; CAM_DEBUG(perph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n")); device = perph->path->device; s = splsoftcam(); if (periph_is_queued(perph)) { /* Simply reorder based on new priority */ CAM_DEBUG(perph->path, CAM_DEBUG_SUBTRACE, (" change priority to %d\n", new_priority)); if (new_priority < perph->pinfo.priority) { camq_change_priority(&device->drvq, perph->pinfo.index, new_priority); } runq = 0; } else { /* New entry on the queue */ CAM_DEBUG(perph->path, CAM_DEBUG_SUBTRACE, (" added periph to queue\n")); perph->pinfo.priority = new_priority; perph->pinfo.generation = ++device->drvq.generation; camq_insert(&device->drvq, &perph->pinfo); runq = xpt_schedule_dev_allocq(perph->path->bus, device); } splx(s); if (runq != 0) { CAM_DEBUG(perph->path, CAM_DEBUG_SUBTRACE, (" calling xpt_run_devq\n")); xpt_run_dev_allocq(perph->path->bus); } } /* * Schedule a device to run on a given queue. * If the device was inserted as a new entry on the queue, * return 1 meaning the device queue should be run. If we * were already queued, implying someone else has already * started the queue, return 0 so the caller doesn't attempt * to run the queue. Must be run at either splsoftcam * (or splcam since that encompases splsoftcam). */ static int xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo, u_int32_t new_priority) { int retval; u_int32_t old_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n")); old_priority = pinfo->priority; /* * Are we already queued? */ if (pinfo->index != CAM_UNQUEUED_INDEX) { /* Simply reorder based on new priority */ if (new_priority < old_priority) { camq_change_priority(queue, pinfo->index, new_priority); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("changed priority to %d\n", new_priority)); } retval = 0; } else { /* New entry on the queue */ if (new_priority < old_priority) pinfo->priority = new_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("Inserting onto queue\n")); pinfo->generation = ++queue->generation; camq_insert(queue, pinfo); retval = 1; } return (retval); } static void xpt_run_dev_allocq(struct cam_eb *bus) { struct cam_devq *devq; int s; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_dev_allocq\n")); devq = bus->sim->devq; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, (" qfrozen_cnt == 0x%x, entries == %d, " "openings == %d, active == %d\n", devq->alloc_queue.qfrozen_cnt, devq->alloc_queue.entries, devq->alloc_openings, devq->alloc_active)); s = splsoftcam(); devq->alloc_queue.qfrozen_cnt++; while ((devq->alloc_queue.entries > 0) && (devq->alloc_openings > 0) && (devq->alloc_queue.qfrozen_cnt <= 1)) { struct cam_ed_qinfo *qinfo; struct cam_ed *device; union ccb *work_ccb; struct cam_periph *drv; struct camq *drvq; qinfo = (struct cam_ed_qinfo *)camq_remove(&devq->alloc_queue, CAMQ_HEAD); device = qinfo->device; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("running device %p\n", device)); drvq = &device->drvq; #ifdef CAMDEBUG if (drvq->entries <= 0) { panic("xpt_run_dev_allocq: " "Device on queue without any work to do"); } #endif if ((work_ccb = xpt_get_ccb(device)) != NULL) { devq->alloc_openings--; devq->alloc_active++; drv = (struct cam_periph*)camq_remove(drvq, CAMQ_HEAD); splx(s); xpt_setup_ccb(&work_ccb->ccb_h, drv->path, drv->pinfo.priority); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("calling periph start\n")); drv->periph_start(drv, work_ccb); } else { /* * Malloc failure in alloc_ccb */ /* * XXX add us to a list to be run from free_ccb * if we don't have any ccbs active on this * device queue otherwise we may never get run * again. */ break; } /* Raise IPL for possible insertion and test at top of loop */ s = splsoftcam(); if (drvq->entries > 0) { /* We have more work. Attempt to reschedule */ xpt_schedule_dev_allocq(bus, device); } } devq->alloc_queue.qfrozen_cnt--; splx(s); } static void xpt_run_dev_sendq(struct cam_eb *bus) { struct cam_devq *devq; int s; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_dev_sendq\n")); devq = bus->sim->devq; s = splcam(); devq->send_queue.qfrozen_cnt++; splx(s); s = splsoftcam(); while ((devq->send_queue.entries > 0) && (devq->send_openings > 0)) { struct cam_ed_qinfo *qinfo; struct cam_ed *device; union ccb *work_ccb; struct cam_sim *sim; int ospl; ospl = splcam(); if (devq->send_queue.qfrozen_cnt > 1) { splx(ospl); break; } qinfo = (struct cam_ed_qinfo *)camq_remove(&devq->send_queue, CAMQ_HEAD); device = qinfo->device; /* * If the device has been "frozen", don't attempt * to run it. */ if (device->qfrozen_cnt > 0) { splx(ospl); continue; } CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("running device %p\n", device)); work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD); if (work_ccb == NULL) { printf("device on run queue with no ccbs???"); splx(ospl); continue; } if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) { if (num_highpower <= 0) { /* * We got a high power command, but we * don't have any available slots. Freeze * the device queue until we have a slot * available. */ device->qfrozen_cnt++; STAILQ_INSERT_TAIL(&highpowerq, &work_ccb->ccb_h, xpt_links.stqe); splx(ospl); continue; } else { /* * Consume a high power slot while * this ccb runs. */ num_highpower--; } } devq->active_dev = device; cam_ccbq_remove_ccb(&device->ccbq, work_ccb); cam_ccbq_send_ccb(&device->ccbq, work_ccb); splx(ospl); devq->send_openings--; devq->send_active++; if (device->ccbq.queue.entries > 0) xpt_schedule_dev_sendq(bus, device); if (work_ccb && (work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0){ /* * The client wants to freeze the queue * after this CCB is sent. */ ospl = splcam(); device->qfrozen_cnt++; splx(ospl); } splx(s); if ((device->inq_flags & SID_CmdQue) != 0) work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID; else /* * Clear this in case of a retried CCB that failed * due to a rejected tag. */ work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; /* * Device queues can be shared among multiple sim instances * that reside on different busses. Use the SIM in the queue * CCB's path, rather than the one in the bus that was passed * into this function. */ sim = work_ccb->ccb_h.path->bus->sim; (*(sim->sim_action))(sim, work_ccb); ospl = splcam(); devq->active_dev = NULL; splx(ospl); /* Raise IPL for possible insertion and test at top of loop */ s = splsoftcam(); } splx(s); s = splcam(); devq->send_queue.qfrozen_cnt--; splx(s); } /* * This function merges stuff from the slave ccb into the master ccb, while * keeping important fields in the master ccb constant. */ void xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb) { /* * Pull fields that are valid for peripheral drivers to set * into the master CCB along with the CCB "payload". */ master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count; master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code; master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout; master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags; bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); } void xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n")); ccb_h->pinfo.priority = priority; ccb_h->path = path; ccb_h->path_id = path->bus->path_id; if (path->target) ccb_h->target_id = path->target->target_id; else ccb_h->target_id = CAM_TARGET_WILDCARD; if (path->device) { ccb_h->target_lun = path->device->lun_id; ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation; } else { ccb_h->target_lun = CAM_TARGET_WILDCARD; } ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; ccb_h->flags = 0; } /* Path manipulation functions */ cam_status xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_path *path; cam_status status; path = (struct cam_path *)malloc(sizeof(*path), M_DEVBUF, M_NOWAIT); if (path == NULL) { status = CAM_RESRC_UNAVAIL; return(status); } status = xpt_compile_path(path, perph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) { free(path, M_DEVBUF); path = NULL; } *new_path_ptr = path; return (status); } static cam_status xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_eb *bus; struct cam_et *target; struct cam_ed *device; cam_status status; int s; status = CAM_REQ_CMP; /* Completed without error */ target = NULL; /* Wildcarded */ device = NULL; /* Wildcarded */ /* * We will potentially modify the EDT, so block interrupts * that may attempt to create cam paths. */ s = splcam(); bus = xpt_find_bus(path_id); if (bus == NULL) { status = CAM_PATH_INVALID; } else { target = xpt_find_target(bus, target_id); if (target == NULL) { /* Create one */ struct cam_et *new_target; new_target = xpt_alloc_target(bus, target_id); if (new_target == NULL) { status = CAM_RESRC_UNAVAIL; } else { target = new_target; } } if (target != NULL) { device = xpt_find_device(target, lun_id); if (device == NULL) { /* Create one */ struct cam_ed *new_device; new_device = xpt_alloc_device(bus, target, lun_id); if (new_device == NULL) { status = CAM_RESRC_UNAVAIL; } else { device = new_device; } } } } splx(s); /* * Only touch the user's data if we are successful. */ if (status == CAM_REQ_CMP) { new_path->periph = perph; new_path->bus = bus; new_path->target = target; new_path->device = device; CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n")); } else { if (device != NULL) xpt_release_device(bus, target, device); if (target != NULL) xpt_release_target(bus, target); if (bus != NULL) xpt_release_bus(bus); } return (status); } static void xpt_release_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n")); if (path->device != NULL) { xpt_release_device(path->bus, path->target, path->device); path->device = NULL; } if (path->target != NULL) { xpt_release_target(path->bus, path->target); path->target = NULL; } if (path->bus != NULL) { xpt_release_bus(path->bus); path->bus = NULL; } } void xpt_free_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n")); xpt_release_path(path); free(path, M_DEVBUF); } /* * Return -1 for failure, 0 for exact match, 1 for match with wildcards. */ int xpt_path_comp(struct cam_path *path1, struct cam_path *path2) { int retval = 0; if (path1->bus != path2->bus) { if (path1->bus->path_id == CAM_BUS_WILDCARD || path2->bus->path_id == CAM_BUS_WILDCARD) retval = 1; else return (-1); } if (path1->target != path2->target) { if (path1->target->target_id == CAM_TARGET_WILDCARD || path2->target->target_id == CAM_TARGET_WILDCARD) retval = 1; else return (-1); } if (path1->device != path2->device) { if (path1->device->lun_id == CAM_LUN_WILDCARD || path2->device->lun_id == CAM_LUN_WILDCARD) retval = 1; else return (-1); } return (retval); } void xpt_print_path(struct cam_path *path) { if (path == NULL) printf("(nopath): "); else { if (path->periph != NULL) printf("(%s%d:", path->periph->periph_name, path->periph->unit_number); else printf("(noperiph:"); if (path->bus != NULL) printf("%s%d:%d:", path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id); else printf("nobus:"); if (path->target != NULL) printf("%d:", path->target->target_id); else printf("X:"); if (path->device != NULL) printf("%d): ", path->device->lun_id); else printf("X): "); } } path_id_t xpt_path_path_id(struct cam_path *path) { return(path->bus->path_id); } target_id_t xpt_path_target_id(struct cam_path *path) { if (path->target != NULL) return (path->target->target_id); else return (CAM_TARGET_WILDCARD); } lun_id_t xpt_path_lun_id(struct cam_path *path) { if (path->device != NULL) return (path->device->lun_id); else return (CAM_LUN_WILDCARD); } struct cam_sim * xpt_path_sim(struct cam_path *path) { return (path->bus->sim); } struct cam_periph* xpt_path_periph(struct cam_path *path) { return (path->periph); } /* * Release a CAM control block for the caller. Remit the cost of the structure * to the device referenced by the path. If the this device had no 'credits' * and peripheral drivers have registered async callbacks for this notification * call them now. */ void xpt_release_ccb(union ccb *free_ccb) { int s; struct cam_path *path; struct cam_ed *device; struct cam_eb *bus; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n")); path = free_ccb->ccb_h.path; device = path->device; bus = path->bus; s = splsoftcam(); cam_ccbq_release_opening(&device->ccbq); if (xpt_ccb_count > xpt_max_ccbs) { xpt_free_ccb(free_ccb); xpt_ccb_count--; } else { SLIST_INSERT_HEAD(&ccb_freeq, &free_ccb->ccb_h, xpt_links.sle); } bus->sim->devq->alloc_openings++; bus->sim->devq->alloc_active--; /* XXX Turn this into an inline function - xpt_run_device?? */ if ((device_is_alloc_queued(device) == 0) && (device->drvq.entries > 0)) { xpt_schedule_dev_allocq(bus, device); } splx(s); if (dev_allocq_is_runnable(bus->sim->devq)) xpt_run_dev_allocq(bus); } /* Functions accessed by SIM drivers */ /* * A sim structure, listing the SIM entry points and instance * identification info is passed to xpt_bus_register to hook the SIM * into the CAM framework. xpt_bus_register creates a cam_eb entry * for this new bus and places it in the array of busses and assigns * it a path_id. The path_id may be influenced by "hard wiring" * information specified by the user. Once interrupt services are * availible, the bus will be probed. */ int32_t xpt_bus_register(struct cam_sim *sim, u_int32_t bus) { static path_id_t buscount; struct cam_eb *new_bus; struct ccb_pathinq cpi; int s; sim->bus_id = bus; new_bus = (struct cam_eb *)malloc(sizeof(*new_bus), M_DEVBUF, M_NOWAIT); if (new_bus == NULL) { /* Couldn't satisfy request */ return (CAM_RESRC_UNAVAIL); } bzero(new_bus, sizeof(*new_bus)); if (strcmp(sim->sim_name, "xpt") != 0) { sim->path_id = xptpathid(sim->sim_name, sim->unit_number, sim->bus_id, &buscount); } new_bus->path_id = sim->path_id; new_bus->sim = sim; TAILQ_INIT(&new_bus->et_entries); + timevalclear(&new_bus->last_reset); new_bus->refcount = 1; /* Held until a bus_deregister event */ s = splcam(); TAILQ_INSERT_TAIL(&xpt_busses, new_bus, links); bus_generation++; splx(s); /* Notify interested parties */ if (sim->path_id != CAM_XPT_PATH_ID) { struct cam_path path; xpt_compile_path(&path, /*periph*/NULL, sim->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); xpt_setup_ccb(&cpi.ccb_h, &path, /*priority*/1); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); xpt_async(AC_PATH_REGISTERED, xpt_periph->path, &cpi); xpt_release_path(&path); } return (CAM_SUCCESS); } static int xptnextfreebus(path_id_t startbus) { struct cam_sim_config *sim_conf; sim_conf = cam_sinit; while (sim_conf->sim_name != NULL) { if (IS_SPECIFIED(sim_conf->pathid) && (startbus == sim_conf->pathid)) { ++startbus; /* Start the search over */ sim_conf = cam_sinit; } else { sim_conf++; } } return (startbus); } static int xptpathid(const char *sim_name, int sim_unit, int sim_bus, path_id_t *nextpath) { struct cam_sim_config *sim_conf; path_id_t pathid; pathid = CAM_XPT_PATH_ID; for (sim_conf = cam_sinit; sim_conf->sim_name != NULL; sim_conf++) { if (!IS_SPECIFIED(sim_conf->pathid)) continue; if (!strcmp(sim_name, sim_conf->sim_name) && (sim_unit == sim_conf->sim_unit)) { if (IS_SPECIFIED(sim_conf->sim_bus)) { if (sim_bus == sim_conf->sim_bus) { pathid = sim_conf->pathid; break; } } else if (sim_bus == 0) { /* Unspecified matches bus 0 */ pathid = sim_conf->pathid; break; } else { printf("Ambiguous scbus configuration for %s%d " "bus %d, cannot wire down. The kernel " "config entry for scbus%d should " "specify a controller bus.\n" "Scbus will be assigned dynamically.\n", sim_name, sim_unit, sim_bus, sim_conf->pathid); break; } } } if (pathid == CAM_XPT_PATH_ID) { pathid = xptnextfreebus(*nextpath); *nextpath = pathid + 1; } return (pathid); } int32_t xpt_bus_deregister(path_id) u_int8_t path_id; { /* XXX */ return (CAM_SUCCESS); } void xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg) { struct cam_eb *bus; struct cam_et *target, *next_target; struct cam_ed *device, *next_device; int s; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_async\n")); /* * Most async events come from a CAM interrupt context. In * a few cases, the error recovery code at the peripheral layer, * which may run from our SWI or a process context, may signal * deferred events with a call to xpt_async. Ensure async * notifications are serialized by blocking cam interrupts. */ s = splcam(); bus = path->bus; - /* - * Freeze the SIM queue for SCSI_DELAY ms to - * allow the bus to settle. - */ if (async_code == AC_BUS_RESET) { - struct cam_sim *sim; - - sim = bus->sim; - - /* - * If there isn't already another timeout pending, go ahead - * and freeze the simq and set the timeout flag. If there - * is another timeout pending, replace it with this - * timeout. There could be two bus reset async broadcasts - * sent for some dual-channel controllers. - */ - if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) == 0) { - xpt_freeze_simq(sim, 1); - sim->flags |= CAM_SIM_REL_TIMEOUT_PENDING; - } else - untimeout(xpt_release_simq_timeout, sim, sim->c_handle); + int s; - sim->c_handle = timeout(xpt_release_simq_timeout, - sim, (SCSI_DELAY * hz) / 1000); + s = splclock(); + /* Update our notion of when the last reset occurred */ + microtime(&bus->last_reset); + splx(s); } for (target = TAILQ_FIRST(&bus->et_entries); target != NULL; target = next_target) { next_target = TAILQ_NEXT(target, links); if (path->target != target - && path->target != NULL) + && path->target->target_id != CAM_TARGET_WILDCARD) continue; + if (async_code == AC_SENT_BDR) { + int s; + + /* Update our notion of when the last reset occurred */ + s = splclock(); + microtime(&path->target->last_reset); + splx(s); + } + for (device = TAILQ_FIRST(&target->ed_entries); device != NULL; device = next_device) { cam_status status; struct cam_path newpath; next_device = TAILQ_NEXT(device, links); if (path->device != device - && path->device != NULL) + && path->device->lun_id != CAM_LUN_WILDCARD) continue; /* * We need our own path with wildcards expanded to * handle certain types of events. */ if ((async_code == AC_SENT_BDR) || (async_code == AC_BUS_RESET) || (async_code == AC_INQ_CHANGED)) status = xpt_compile_path(&newpath, NULL, bus->path_id, target->target_id, device->lun_id); else status = CAM_REQ_CMP_ERR; if (status == CAM_REQ_CMP) { /* * Allow transfer negotiation to occur in a * tag free environment. */ if (async_code == AC_SENT_BDR || async_code == AC_BUS_RESET) xpt_toggle_tags(&newpath); - /* - * If we send a BDR, freeze the device queue - * for SCSI_DELAY ms to allow it to settle - * down. - */ - if (async_code == AC_SENT_BDR) { - xpt_freeze_devq(&newpath, 1); - /* - * Although this looks bad, it - * isn't as bad as it seems. We're - * passing in a stack-allocated path - * that we then immediately release - * after scheduling a timeout to - * release the device queue. So - * the path won't be around when - * the timeout fires, right? Right. - * But it doesn't matter, since - * xpt_release_devq and its timeout - * function both take the device as - * an argument. Theoretically, the - * device will still be there when - * the timeout fires, even though - * the path will be gone. - */ - cam_release_devq( - &newpath, - /*relsim_flags*/ - RELSIM_RELEASE_AFTER_TIMEOUT, - /*reduction*/0, - /*timeout*/SCSI_DELAY, - /*getcount_only*/0); - } else if (async_code == AC_INQ_CHANGED) { + if (async_code == AC_INQ_CHANGED) { /* * We've sent a start unit command, or * something similar to a device that * may have caused its inquiry data to * change. So we re-scan the device to * refresh the inquiry data for it. */ xpt_scan_lun(newpath.periph, &newpath, CAM_EXPECT_INQ_CHANGE, NULL); } xpt_release_path(&newpath); } else if (async_code == AC_LOST_DEVICE) { device->flags |= CAM_DEV_UNCONFIGURED; } else if (async_code == AC_TRANSFER_NEG) { struct ccb_trans_settings *settings; settings = (struct ccb_trans_settings *)async_arg; xpt_set_transfer_settings(settings, device, /*async_update*/TRUE); } xpt_async_bcast(&device->asyncs, async_code, path, async_arg); } } /* * If this wasn't a fully wildcarded async, tell all * clients that want all async events. */ if (bus != xpt_periph->path->bus) xpt_async_bcast(&xpt_periph->path->device->asyncs, async_code, path, async_arg); splx(s); } static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg) { struct async_node *cur_entry; cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { struct async_node *next_entry; /* * Grab the next list entry before we call the current * entry's callback. This is because the callback function * can delete its async callback entry. */ next_entry = SLIST_NEXT(cur_entry, links); if ((cur_entry->event_enable & async_code) != 0) cur_entry->callback(cur_entry->callback_arg, async_code, path, async_arg); cur_entry = next_entry; } } u_int32_t xpt_freeze_devq(struct cam_path *path, u_int count) { int s; struct ccb_hdr *ccbh; s = splcam(); path->device->qfrozen_cnt += count; /* * Mark the last CCB in the queue as needing * to be requeued if the driver hasn't * changed it's state yet. This fixes a race * where a ccb is just about to be queued to * a controller driver when it's interrupt routine * freezes the queue. To completly close the * hole, controller drives must check to see * if a ccb's status is still CAM_REQ_INPROG * under spl protection just before they queue * the CCB. See ahc_action/ahc_freeze_devq for * an example. */ ccbh = TAILQ_LAST(&path->device->ccbq.active_ccbs, ccb_hdr_tailq); if (ccbh && ccbh->status == CAM_REQ_INPROG) ccbh->status = CAM_REQUEUE_REQ; splx(s); return (path->device->qfrozen_cnt); } u_int32_t xpt_freeze_simq(struct cam_sim *sim, u_int count) { sim->devq->send_queue.qfrozen_cnt += count; if (sim->devq->active_dev != NULL) { struct ccb_hdr *ccbh; ccbh = TAILQ_LAST(&sim->devq->active_dev->ccbq.active_ccbs, ccb_hdr_tailq); if (ccbh && ccbh->status == CAM_REQ_INPROG) ccbh->status = CAM_REQUEUE_REQ; } return (sim->devq->send_queue.qfrozen_cnt); } static void xpt_release_devq_timeout(void *arg) { struct cam_ed *device; device = (struct cam_ed *)arg; xpt_release_devq(device, /*run_queue*/TRUE); } void xpt_release_devq(struct cam_ed *dev, int run_queue) { int rundevq; int s; rundevq = 0; s = splcam(); if (dev->qfrozen_cnt > 0) { dev->qfrozen_cnt--; if (dev->qfrozen_cnt == 0) { /* * No longer need to wait for a successful * command completion. */ dev->flags &= ~CAM_DEV_REL_ON_COMPLETE; /* * Remove any timeouts that might be scheduled * to release this queue. */ if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { untimeout(xpt_release_devq_timeout, dev, dev->c_handle); dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING; } /* * Now that we are unfrozen schedule the * device so any pending transactions are * run. */ if ((dev->ccbq.queue.entries > 0) && (xpt_schedule_dev_sendq(dev->target->bus, dev)) && (run_queue != 0)) { rundevq = 1; } } } splx(s); if (rundevq != 0) xpt_run_dev_sendq(dev->target->bus); } void xpt_release_simq(struct cam_sim *sim, int run_queue) { int s; struct camq *sendq; sendq = &(sim->devq->send_queue); s = splcam(); if (sendq->qfrozen_cnt > 0) { sendq->qfrozen_cnt--; if (sendq->qfrozen_cnt == 0) { struct cam_eb *bus; /* * If there is a timeout scheduled to release this * sim queue, remove it. The queue frozen count is * already at 0. */ if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){ untimeout(xpt_release_simq_timeout, sim, sim->c_handle); sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING; } bus = xpt_find_bus(sim->path_id); splx(s); if (run_queue) { /* * Now that we are unfrozen run the send queue. */ xpt_run_dev_sendq(bus); } xpt_release_bus(bus); } else splx(s); } else splx(s); } static void xpt_release_simq_timeout(void *arg) { struct cam_sim *sim; sim = (struct cam_sim *)arg; xpt_release_simq(sim, /* run_queue */ TRUE); } void xpt_done(union ccb *done_ccb) { int s; s = splcam(); CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n")); if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) != 0) { /* * Queue up the request for handling by our SWI handler * any of the "non-immediate" type of ccbs. */ switch (done_ccb->ccb_h.path->periph->type) { case CAM_PERIPH_BIO: TAILQ_INSERT_TAIL(&cam_bioq, &done_ccb->ccb_h, sim_links.tqe); done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX; setsoftcambio(); break; case CAM_PERIPH_NET: TAILQ_INSERT_TAIL(&cam_netq, &done_ccb->ccb_h, sim_links.tqe); done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX; setsoftcamnet(); break; } } splx(s); } union ccb * xpt_alloc_ccb() { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_DEVBUF, M_WAITOK); return (new_ccb); } void xpt_free_ccb(union ccb *free_ccb) { free(free_ccb, M_DEVBUF); } /* Private XPT functions */ /* * Get a CAM control block for the caller. Charge the structure to the device * referenced by the path. If the this device has no 'credits' then the * device already has the maximum number of outstanding operations under way * and we return NULL. If we don't have sufficient resources to allocate more * ccbs, we also return NULL. */ static union ccb * xpt_get_ccb(struct cam_ed *device) { union ccb *new_ccb; int s; s = splsoftcam(); if ((new_ccb = (union ccb *)ccb_freeq.slh_first) == NULL) { new_ccb = malloc(sizeof(*new_ccb), M_DEVBUF, M_NOWAIT); if (new_ccb == NULL) { splx(s); return (NULL); } callout_handle_init(&new_ccb->ccb_h.timeout_ch); SLIST_INSERT_HEAD(&ccb_freeq, &new_ccb->ccb_h, xpt_links.sle); xpt_ccb_count++; } cam_ccbq_take_opening(&device->ccbq); SLIST_REMOVE_HEAD(&ccb_freeq, xpt_links.sle); splx(s); return (new_ccb); } static void xpt_release_bus(struct cam_eb *bus) { int s; s = splcam(); if ((--bus->refcount == 0) && (TAILQ_FIRST(&bus->et_entries) == NULL)) { TAILQ_REMOVE(&xpt_busses, bus, links); bus_generation++; splx(s); free(bus, M_DEVBUF); } else splx(s); } static struct cam_et * xpt_alloc_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *target; target = (struct cam_et *)malloc(sizeof(*target), M_DEVBUF, M_NOWAIT); if (target != NULL) { struct cam_et *cur_target; target->bus = bus; target->target_id = target_id; target->refcount = 1; /* * Hold a reference to our parent bus so it * will not go away before we do. */ bus->refcount++; TAILQ_INIT(&target->ed_entries); + timevalclear(&target->last_reset); /* Insertion sort into our bus's target list */ cur_target = TAILQ_FIRST(&bus->et_entries); while (cur_target != NULL && cur_target->target_id < target_id) cur_target = TAILQ_NEXT(cur_target, links); if (cur_target != NULL) { TAILQ_INSERT_BEFORE(cur_target, target, links); } else { TAILQ_INSERT_TAIL(&bus->et_entries, target, links); } bus->generation++; } return (target); } static void xpt_release_target(struct cam_eb *bus, struct cam_et *target) { int s; s = splcam(); if ((--target->refcount == 0) && (TAILQ_FIRST(&target->ed_entries) == NULL)) { TAILQ_REMOVE(&bus->et_entries, target, links); bus->generation++; splx(s); free(target, M_DEVBUF); xpt_release_bus(bus); } else splx(s); } static struct cam_ed * xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; struct cam_devq *devq; cam_status status; /* Make space for us in the device queue on our bus */ devq = bus->sim->devq; status = cam_devq_resize(devq, devq->alloc_queue.array_size + 1); if (status != CAM_REQ_CMP) { device = NULL; } else { device = (struct cam_ed *)malloc(sizeof(*device), M_DEVBUF, M_NOWAIT); } if (device != NULL) { struct cam_ed *cur_device; bzero(device, sizeof(*device)); SLIST_INIT(&device->asyncs); SLIST_INIT(&device->periphs); callout_handle_init(&device->c_handle); device->refcount = 1; device->flags |= CAM_DEV_UNCONFIGURED; + device->quirk = &xpt_quirk_table[xpt_quirk_table_size - 1]; cam_init_pinfo(&device->alloc_ccb_entry.pinfo); device->alloc_ccb_entry.device = device; cam_init_pinfo(&device->send_ccb_entry.pinfo); device->send_ccb_entry.device = device; device->target = target; /* * Hold a reference to our parent target so it * will not go away before we do. */ target->refcount++; device->lun_id = lun_id; /* Initialize our queues */ if (camq_init(&device->drvq, 0) != 0) { free(device, M_DEVBUF); return (NULL); } if (cam_ccbq_init(&device->ccbq, bus->sim->max_dev_openings) != 0) { camq_fini(&device->drvq); free(device, M_DEVBUF); return (NULL); } /* * XXX should be limited by number of CCBs this bus can * do. */ xpt_max_ccbs += device->ccbq.devq_openings; /* Insertion sort into our target's device list */ cur_device = TAILQ_FIRST(&target->ed_entries); while (cur_device != NULL && cur_device->lun_id < lun_id) cur_device = TAILQ_NEXT(cur_device, links); if (cur_device != NULL) { TAILQ_INSERT_BEFORE(cur_device, device, links); } else { TAILQ_INSERT_TAIL(&target->ed_entries, device, links); } target->generation++; } return (device); } static void xpt_release_device(struct cam_eb *bus, struct cam_et *target, struct cam_ed *device) { int s; s = splcam(); if ((--device->refcount == 0) && ((device->flags & CAM_DEV_UNCONFIGURED) != 0)) { struct cam_devq *devq; if (device->alloc_ccb_entry.pinfo.index != CAM_UNQUEUED_INDEX || device->send_ccb_entry.pinfo.index != CAM_UNQUEUED_INDEX) panic("Removing device while still queued for ccbs"); TAILQ_REMOVE(&target->ed_entries, device,links); target->generation++; xpt_max_ccbs -= device->ccbq.devq_openings; /* Release our slot in the devq */ devq = bus->sim->devq; cam_devq_resize(devq, devq->alloc_queue.array_size - 1); splx(s); free(device, M_DEVBUF); } else splx(s); } static u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings) { int s; int diff; int result; struct cam_ed *dev; dev = path->device; s = splsoftcam(); diff = newopenings - (dev->ccbq.dev_active + dev->ccbq.dev_openings); result = cam_ccbq_resize(&dev->ccbq, newopenings); if (result == CAM_REQ_CMP && (diff < 0)) { dev->flags |= CAM_DEV_RESIZE_QUEUE_NEEDED; } /* Adjust the global limit */ xpt_max_ccbs += diff; splx(s); return (result); } static struct cam_eb * xpt_find_bus(path_id_t path_id) { struct cam_eb *bus; for (bus = TAILQ_FIRST(&xpt_busses); bus != NULL; bus = TAILQ_NEXT(bus, links)) { if (bus->path_id == path_id) { bus->refcount++; break; } } return (bus); } static struct cam_et * xpt_find_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *target; for (target = TAILQ_FIRST(&bus->et_entries); target != NULL; target = TAILQ_NEXT(target, links)) { if (target->target_id == target_id) { target->refcount++; break; } } return (target); } static struct cam_ed * xpt_find_device(struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; for (device = TAILQ_FIRST(&target->ed_entries); device != NULL; device = TAILQ_NEXT(device, links)) { if (device->lun_id == lun_id) { device->refcount++; break; } } return (device); } typedef struct { union ccb *request_ccb; struct ccb_pathinq *cpi; int pending_count; } xpt_scan_bus_info; /* * To start a scan, request_ccb is an XPT_SCAN_BUS ccb. * As the scan progresses, xpt_scan_bus is used as the * callback on completion function. */ static void xpt_scan_bus(struct cam_periph *periph, union ccb *request_ccb) { CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_scan_bus\n")); switch (request_ccb->ccb_h.func_code) { case XPT_SCAN_BUS: { xpt_scan_bus_info *scan_info; union ccb *work_ccb; struct cam_path *path; u_int i; u_int max_target; u_int initiator_id; /* Find out the characteristics of the bus */ work_ccb = xpt_alloc_ccb(); xpt_setup_ccb(&work_ccb->ccb_h, request_ccb->ccb_h.path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_PATH_INQ; xpt_action(work_ccb); if (work_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = work_ccb->ccb_h.status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } if ((work_ccb->cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } /* Save some state for use while we probe for devices */ scan_info = (xpt_scan_bus_info *) malloc(sizeof(xpt_scan_bus_info), M_TEMP, M_WAITOK); scan_info->request_ccb = request_ccb; scan_info->cpi = &work_ccb->cpi; /* Cache on our stack so we can work asynchronously */ max_target = scan_info->cpi->max_target; initiator_id = scan_info->cpi->initiator_id; /* * Don't count the initiator if the * initiator is addressable. */ scan_info->pending_count = max_target + 1; if (initiator_id <= max_target) scan_info->pending_count--; for (i = 0; i <= max_target; i++) { cam_status status; if (i == initiator_id) continue; status = xpt_create_path(&path, xpt_periph, request_ccb->ccb_h.path_id, i, 0); if (status != CAM_REQ_CMP) { printf("xpt_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); break; } work_ccb = xpt_alloc_ccb(); xpt_setup_ccb(&work_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_SCAN_LUN; work_ccb->ccb_h.cbfcnp = xpt_scan_bus; work_ccb->ccb_h.ppriv_ptr0 = scan_info; work_ccb->crcn.flags = request_ccb->crcn.flags; #if 0 printf("xpt_scan_bus: probing %d:%d:%d\n", request_ccb->ccb_h.path_id, i, 0); #endif xpt_action(work_ccb); } break; } case XPT_SCAN_LUN: { xpt_scan_bus_info *scan_info; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; /* Reuse the same CCB to query if a device was really found */ scan_info = (xpt_scan_bus_info *)request_ccb->ccb_h.ppriv_ptr0; xpt_setup_ccb(&request_ccb->ccb_h, request_ccb->ccb_h.path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_GDEV_TYPE; path_id = request_ccb->ccb_h.path_id; target_id = request_ccb->ccb_h.target_id; lun_id = request_ccb->ccb_h.target_lun; xpt_action(request_ccb); #if 0 printf("xpt_scan_bus: got back probe from %d:%d:%d\n", path_id, target_id, lun_id); #endif if (request_ccb->ccb_h.status != CAM_REQ_CMP) { struct cam_ed *device; struct cam_et *target; int s; /* * If we already probed lun 0 successfully, or * we have additional configured luns on this * target that might have "gone away", go onto * the next lun. */ target = request_ccb->ccb_h.path->target; s = splcam(); device = TAILQ_FIRST(&target->ed_entries); if (device != NULL) device = TAILQ_NEXT(device, links); splx(s); if ((lun_id != 0) || (device != NULL)) { /* Try the next lun */ lun_id++; } } else { struct cam_ed *device; device = request_ccb->ccb_h.path->device; if ((device->quirk->quirks & CAM_QUIRK_NOLUNS) == 0) { /* Try the next lun */ lun_id++; } } xpt_free_path(request_ccb->ccb_h.path); /* Check Bounds */ if ((lun_id == request_ccb->ccb_h.target_lun) || lun_id > scan_info->cpi->max_lun) { /* We're done */ xpt_free_ccb(request_ccb); scan_info->pending_count--; if (scan_info->pending_count == 0) { xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_TEMP); request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); } } else { /* Try the next device */ struct cam_path *path; cam_status status; path = request_ccb->ccb_h.path; status = xpt_create_path(&path, xpt_periph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) { printf("xpt_scan_bus: xpt_create_path failed " "with status %#x, halting LUN scan\n", status); xpt_free_ccb(request_ccb); scan_info->pending_count--; if (scan_info->pending_count == 0) { xpt_free_ccb( (union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_TEMP); request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); break; } } xpt_setup_ccb(&request_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.cbfcnp = xpt_scan_bus; request_ccb->ccb_h.ppriv_ptr0 = scan_info; request_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; #if 0 xpt_print_path(path); printf("xpt_scan bus probing\n"); #endif xpt_action(request_ccb); } break; } default: break; } } typedef enum { PROBE_TUR, PROBE_INQUIRY, PROBE_MODE_SENSE, PROBE_SERIAL_NUM, PROBE_TUR_FOR_NEGOTIATION } probe_action; typedef enum { PROBE_INQUIRY_CKSUM = 0x01, PROBE_SERIAL_CKSUM = 0x02, PROBE_NO_ANNOUNCE = 0x04 } probe_flags; typedef struct { TAILQ_HEAD(, ccb_hdr) request_ccbs; probe_action action; union ccb saved_ccb; probe_flags flags; MD5_CTX context; u_int8_t digest[16]; } probe_softc; static void xpt_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *request_ccb) { struct ccb_pathinq cpi; cam_status status; struct cam_path *new_path; struct cam_periph *old_periph; int s; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_scan_lun\n")); xpt_setup_ccb(&cpi.ccb_h, path, /*priority*/1); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); if (cpi.ccb_h.status != CAM_REQ_CMP) { if (request_ccb != NULL) { request_ccb->ccb_h.status = cpi.ccb_h.status; xpt_done(request_ccb); } return; } if ((cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ if (request_ccb != NULL) { request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); } return; } if (request_ccb == NULL) { request_ccb = malloc(sizeof(union ccb), M_TEMP, M_NOWAIT); if (request_ccb == NULL) { xpt_print_path(path); printf("xpt_scan_lun: can't allocate CCB, can't " "continue\n"); return; } new_path = malloc(sizeof(*new_path), M_TEMP, M_NOWAIT); if (new_path == NULL) { xpt_print_path(path); printf("xpt_scan_lun: can't allocate path, can't " "continue\n"); free(request_ccb, M_TEMP); return; } status = xpt_compile_path(new_path, xpt_periph, path->bus->path_id, path->target->target_id, path->device->lun_id); if (status != CAM_REQ_CMP) { xpt_print_path(path); printf("xpt_scan_lun: can't compile path, can't " "continue\n"); free(request_ccb, M_TEMP); free(new_path, M_TEMP); return; } xpt_setup_ccb(&request_ccb->ccb_h, new_path, /*priority*/ 1); request_ccb->ccb_h.cbfcnp = xptscandone; request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->crcn.flags = flags; } s = splsoftcam(); if ((old_periph = cam_periph_find(path, "probe")) != NULL) { probe_softc *softc; softc = (probe_softc *)old_periph->softc; TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); } else { status = cam_periph_alloc(proberegister, NULL, probecleanup, probestart, "probe", CAM_PERIPH_BIO, request_ccb->ccb_h.path, NULL, 0, request_ccb); if (status != CAM_REQ_CMP) { xpt_print_path(path); printf("xpt_scan_lun: cam_alloc_periph returned an " "error, can't continue probe\n"); request_ccb->ccb_h.status = status; xpt_done(request_ccb); } } splx(s); } static void xptscandone(struct cam_periph *periph, union ccb *done_ccb) { xpt_release_path(done_ccb->ccb_h.path); free(done_ccb->ccb_h.path, M_TEMP); free(done_ccb, M_TEMP); } static cam_status proberegister(struct cam_periph *periph, void *arg) { - struct ccb_getdev *cgd; + union ccb *request_ccb; /* CCB representing the probe request */ probe_softc *softc; - union ccb *ccb; - cgd = (struct ccb_getdev *)arg; + request_ccb = (union ccb *)arg; if (periph == NULL) { printf("proberegister: periph was NULL!!\n"); return(CAM_REQ_CMP_ERR); } - if (cgd == NULL) { - printf("proberegister: no getdev CCB, can't register device\n"); + if (request_ccb == NULL) { + printf("proberegister: no probe CCB, can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (probe_softc *)malloc(sizeof(*softc), M_TEMP, M_NOWAIT); if (softc == NULL) { printf("proberegister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } - ccb = (union ccb *)cgd; TAILQ_INIT(&softc->request_ccbs); - TAILQ_INSERT_TAIL(&softc->request_ccbs, &ccb->ccb_h, periph_links.tqe); + TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, + periph_links.tqe); softc->flags = 0; periph->softc = softc; cam_periph_acquire(periph); + /* + * Ensure we've waited at least a bus settle + * delay before attempting to probe the device. + */ + cam_periph_freeze_after_event(periph, &periph->path->bus->last_reset, + SCSI_DELAY); probeschedule(periph); return(CAM_REQ_CMP); } static void probeschedule(struct cam_periph *periph) { + struct ccb_pathinq cpi; union ccb *ccb; probe_softc *softc; softc = (probe_softc *)periph->softc; ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); + xpt_setup_ccb(&cpi.ccb_h, periph->path, /*priority*/1); + cpi.ccb_h.func_code = XPT_PATH_INQ; + xpt_action((union ccb *)&cpi); + /* * If a device has gone away and another device, or the same one, * is back in the same place, it should have a unit attention * condition pending. It will not report the unit attention in * response to an inquiry, which may leave invalid transfer * negotiations in effect. The TUR will reveal the unit attention * condition. Only send the TUR for lun 0, since some devices * will get confused by commands other than inquiry to non-existent * luns. If you think a device has gone away start your scan from * lun 0. This will insure that any bogus transfer settings are * invalidated. + * + * If we haven't seen the device before and the controller supports + * some kind of transfer negotiation, negotiate with the first + * sent command if no bus reset was performed at startup. This + * ensures that the device is not confused by transfer negotiation + * settings left over by loader or BIOS action. */ if (((ccb->ccb_h.path->device->flags & CAM_DEV_UNCONFIGURED) == 0) - && (ccb->ccb_h.target_lun == 0)) + && (ccb->ccb_h.target_lun == 0)) { softc->action = PROBE_TUR; - else + } else if ((cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) != 0 + && (cpi.hba_misc & PIM_NOBUSRESET) != 0) { + proberequestdefaultnegotiation(periph); softc->action = PROBE_INQUIRY; + } else { + softc->action = PROBE_INQUIRY; + } if (ccb->crcn.flags & CAM_EXPECT_INQ_CHANGE) softc->flags |= PROBE_NO_ANNOUNCE; else softc->flags &= ~PROBE_NO_ANNOUNCE; xpt_schedule(periph, ccb->ccb_h.pinfo.priority); } static void probestart(struct cam_periph *periph, union ccb *start_ccb) { /* Probe the device that our peripheral driver points to */ struct ccb_scsiio *csio; probe_softc *softc; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probestart\n")); softc = (probe_softc *)periph->softc; csio = &start_ccb->csio; switch (softc->action) { case PROBE_TUR: case PROBE_TUR_FOR_NEGOTIATION: { scsi_test_unit_ready(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/60000); break; } case PROBE_INQUIRY: { struct scsi_inquiry_data *inq_buf; inq_buf = &periph->path->device->inq_data; /* * If the device is currently configured, we calculate an * MD5 checksum of the inquiry data, and if the serial number * length is greater than 0, add the serial number data * into the checksum as well. Once the inquiry and the * serial number check finish, we attempt to figure out * whether we still have the same device. */ if ((periph->path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { MD5Init(&softc->context); MD5Update(&softc->context, (unsigned char *)inq_buf, sizeof(struct scsi_inquiry_data)); softc->flags |= PROBE_INQUIRY_CKSUM; if (periph->path->device->serial_num_len > 0) { MD5Update(&softc->context, periph->path->device->serial_num, periph->path->device->serial_num_len); softc->flags |= PROBE_SERIAL_CKSUM; } MD5Final(softc->digest, &softc->context); } scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)inq_buf, sizeof(*inq_buf), /*evpd*/FALSE, /*page_code*/0, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } case PROBE_MODE_SENSE: { void *mode_buf; int mode_buf_len; mode_buf_len = sizeof(struct scsi_mode_header_6) + sizeof(struct scsi_mode_blk_desc) + sizeof(struct scsi_control_page); mode_buf = malloc(mode_buf_len, M_TEMP, M_NOWAIT); if (mode_buf != NULL) { scsi_mode_sense(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SMS_CONTROL_MODE_PAGE, mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60000); break; } xpt_print_path(periph->path); printf("Unable to mode sense control page - malloc failure\n"); softc->action = PROBE_SERIAL_NUM; /* FALLTHROUGH */ } case PROBE_SERIAL_NUM: { struct scsi_vpd_unit_serial_number *serial_buf; struct cam_ed* device; serial_buf = NULL; device = periph->path->device; device->serial_num = NULL; device->serial_num_len = 0; if ((device->quirk->quirks & CAM_QUIRK_NOSERIAL) == 0) serial_buf = (struct scsi_vpd_unit_serial_number *) malloc(sizeof(*serial_buf), M_TEMP, M_NOWAIT); if (serial_buf != NULL) { bzero(serial_buf, sizeof(*serial_buf)); scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)serial_buf, sizeof(*serial_buf), /*evpd*/TRUE, SVPD_UNIT_SERIAL_NUMBER, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } /* * We'll have to do without, let our probedone * routine finish up for us. */ start_ccb->csio.data_ptr = NULL; probedone(periph, start_ccb); return; } } xpt_action(start_ccb); } +static void +proberequestdefaultnegotiation(struct cam_periph *periph) +{ + struct ccb_trans_settings cts; + + xpt_setup_ccb(&cts.ccb_h, periph->path, /*priority*/1); + cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; + cts.flags = CCB_TRANS_USER_SETTINGS; + xpt_action((union ccb *)&cts); + cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; + cts.flags &= ~CCB_TRANS_USER_SETTINGS; + cts.flags |= CCB_TRANS_CURRENT_SETTINGS; + xpt_action((union ccb *)&cts); +} + static void probedone(struct cam_periph *periph, union ccb *done_ccb) { probe_softc *softc; struct cam_path *path; u_int32_t priority; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probedone\n")); softc = (probe_softc *)periph->softc; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; switch (softc->action) { case PROBE_TUR: { if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, SF_NO_PRINT, NULL) == ERESTART) return; else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path->device, /*run_queue*/TRUE); } softc->action = PROBE_INQUIRY; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } case PROBE_INQUIRY: { if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { struct scsi_inquiry_data *inq_buf; u_int8_t periph_qual; u_int8_t periph_dtype; + path->device->flags |= CAM_DEV_INQUIRY_DATA_VALID; inq_buf = &path->device->inq_data; periph_qual = SID_QUAL(inq_buf); periph_dtype = SID_TYPE(inq_buf); if (periph_dtype != T_NODEVICE) { switch(periph_qual) { case SID_QUAL_LU_CONNECTED: { xpt_find_quirk(path->device); if ((inq_buf->flags & SID_CmdQue) != 0) softc->action = PROBE_MODE_SENSE; else softc->action = PROBE_SERIAL_NUM; path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } default: break; } } } else if (cam_periph_error(done_ccb, 0, done_ccb->ccb_h.target_lun > 0 ? SF_RETRY_UA|SF_QUIET_IR : SF_RETRY_UA, &softc->saved_ccb) == ERESTART) { return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path->device, /*run_queue*/TRUE); } /* * If we get to this point, we got an error status back * from the inquiry and the error status doesn't require * automatically retrying the command. Therefore, the * inquiry failed. If we had inquiry information before * for this device, but this latest inquiry command failed, * the device has probably gone away. If this device isn't * already marked unconfigured, notify the peripheral * drivers that this device is no more. */ if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) /* Send the async notification. */ xpt_async(AC_LOST_DEVICE, path, NULL); xpt_release_ccb(done_ccb); break; } case PROBE_MODE_SENSE: { struct ccb_scsiio *csio; struct scsi_mode_header_6 *mode_hdr; csio = &done_ccb->csio; mode_hdr = (struct scsi_mode_header_6 *)csio->data_ptr; if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { struct scsi_control_page *page; u_int8_t *offset; offset = ((u_int8_t *)&mode_hdr[1]) + mode_hdr->blk_desc_len; page = (struct scsi_control_page *)offset; path->device->queue_flags = page->queue_flags; } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT, &softc->saved_ccb) == ERESTART) { return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path->device, /*run_queue*/TRUE); } xpt_release_ccb(done_ccb); free(mode_hdr, M_TEMP); softc->action = PROBE_SERIAL_NUM; xpt_schedule(periph, priority); return; } case PROBE_SERIAL_NUM: { struct ccb_scsiio *csio; struct scsi_vpd_unit_serial_number *serial_buf; u_int32_t priority; int changed; int have_serialnum; changed = 1; have_serialnum = 0; csio = &done_ccb->csio; priority = done_ccb->ccb_h.pinfo.priority; serial_buf = (struct scsi_vpd_unit_serial_number *)csio->data_ptr; /* Clean up from previous instance of this device */ if (path->device->serial_num != NULL) { free(path->device->serial_num, M_DEVBUF); path->device->serial_num = NULL; path->device->serial_num_len = 0; } if (serial_buf == NULL) { /* * Don't process the command as it was never sent */ } else if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && (serial_buf->length > 0)) { have_serialnum = 1; path->device->serial_num = (u_int8_t *)malloc((serial_buf->length + 1), M_DEVBUF, M_NOWAIT); if (path->device->serial_num != NULL) { bcopy(serial_buf->serial_num, path->device->serial_num, serial_buf->length); path->device->serial_num_len = serial_buf->length; path->device->serial_num[serial_buf->length] = '\0'; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT, &softc->saved_ccb) == ERESTART) { return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path->device, /*run_queue*/TRUE); } /* * Let's see if we have seen this device before. */ if ((softc->flags & PROBE_INQUIRY_CKSUM) != 0) { MD5_CTX context; u_int8_t digest[16]; MD5Init(&context); MD5Update(&context, (unsigned char *)&path->device->inq_data, sizeof(struct scsi_inquiry_data)); if (have_serialnum) MD5Update(&context, serial_buf->serial_num, serial_buf->length); MD5Final(digest, &context); if (bcmp(softc->digest, digest, 16) == 0) changed = 0; /* * XXX Do we need to do a TUR in order to ensure * that the device really hasn't changed??? */ if ((changed != 0) && ((softc->flags & PROBE_NO_ANNOUNCE) == 0)) xpt_async(AC_LOST_DEVICE, path, NULL); } if (serial_buf != NULL) free(serial_buf, M_TEMP); if (changed != 0) { /* * Now that we have all the necessary * information to safely perform transfer * negotiations... Controllers don't perform * any negotiation or tagged queuing until * after the first XPT_SET_TRAN_SETTINGS ccb is * received. So, on a new device, just retreive * the user settings, and set them as the current * settings to set the device up. */ - done_ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; - done_ccb->cts.flags = CCB_TRANS_USER_SETTINGS; - xpt_action(done_ccb); - done_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; - done_ccb->cts.flags &= ~CCB_TRANS_USER_SETTINGS; - done_ccb->cts.flags |= CCB_TRANS_CURRENT_SETTINGS; - xpt_action(done_ccb); + proberequestdefaultnegotiation(periph); xpt_release_ccb(done_ccb); /* * Perform a TUR to allow the controller to * perform any necessary transfer negotiation. */ softc->action = PROBE_TUR_FOR_NEGOTIATION; xpt_schedule(periph, priority); return; } xpt_release_ccb(done_ccb); break; } case PROBE_TUR_FOR_NEGOTIATION: if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path->device, /*run_queue*/TRUE); } path->device->flags &= ~CAM_DEV_UNCONFIGURED; if ((softc->flags & PROBE_NO_ANNOUNCE) == 0) { /* Inform the XPT that a new device has been found */ done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, xpt_periph->path, done_ccb); } xpt_release_ccb(done_ccb); break; } done_ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); TAILQ_REMOVE(&softc->request_ccbs, &done_ccb->ccb_h, periph_links.tqe); done_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(done_ccb); if (TAILQ_FIRST(&softc->request_ccbs) == NULL) { cam_periph_invalidate(periph); cam_periph_release(periph); } else { probeschedule(periph); } } static void probecleanup(struct cam_periph *periph) { free(periph->softc, M_TEMP); } static void xpt_find_quirk(struct cam_ed *device) { caddr_t match; match = cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)xpt_quirk_table, sizeof(xpt_quirk_table)/sizeof(*xpt_quirk_table), sizeof(*xpt_quirk_table), scsi_inquiry_match); if (match == NULL) panic("xpt_find_quirk: device didn't match wildcard entry!!"); device->quirk = (struct xpt_quirk_entry *)match; } static void xpt_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_ed *device, int async_update) { struct cam_sim *sim; int qfrozen; sim = cts->ccb_h.path->bus->sim; if (async_update == FALSE) { struct scsi_inquiry_data *inq_data; struct ccb_pathinq cpi; struct ccb_trans_settings cur_cts; if (device == NULL) { cts->ccb_h.status = CAM_PATH_INVALID; xpt_done((union ccb *)cts); return; } /* * Perform sanity checking against what the * controller and device can do. */ xpt_setup_ccb(&cpi.ccb_h, cts->ccb_h.path, /*priority*/1); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); xpt_setup_ccb(&cur_cts.ccb_h, cts->ccb_h.path, /*priority*/1); cur_cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cur_cts.flags = CCB_TRANS_CURRENT_SETTINGS; xpt_action((union ccb *)&cur_cts); inq_data = &device->inq_data; /* Fill in any gaps in what the user gave us */ if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) == 0) cts->sync_period = cur_cts.sync_period; if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) cts->sync_offset = cur_cts.sync_offset; if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) == 0) cts->bus_width = cur_cts.bus_width; if ((cts->valid & CCB_TRANS_DISC_VALID) == 0) { cts->flags &= ~CCB_TRANS_DISC_ENB; cts->flags |= cur_cts.flags & CCB_TRANS_DISC_ENB; } if ((cts->valid & CCB_TRANS_TQ_VALID) == 0) { cts->flags &= ~CCB_TRANS_TAG_ENB; cts->flags |= cur_cts.flags & CCB_TRANS_TAG_ENB; } - - if ((inq_data->flags & SID_Sync) == 0 + if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0 + && (inq_data->flags & SID_Sync) == 0) || (cpi.hba_inquiry & PI_SDTR_ABLE) == 0) { /* Force async */ cts->sync_period = 0; cts->sync_offset = 0; } switch (cts->bus_width) { case MSG_EXT_WDTR_BUS_32_BIT: - if ((inq_data->flags & SID_WBus32) != 0 + if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 + || (inq_data->flags & SID_WBus32) != 0) && (cpi.hba_inquiry & PI_WIDE_32) != 0) break; /* Fall Through to 16-bit */ case MSG_EXT_WDTR_BUS_16_BIT: - if ((inq_data->flags & SID_WBus16) != 0 + if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 + || (inq_data->flags & SID_WBus16) != 0) && (cpi.hba_inquiry & PI_WIDE_16) != 0) { cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT; break; } /* Fall Through to 8-bit */ default: /* New bus width?? */ case MSG_EXT_WDTR_BUS_8_BIT: /* All targets can do this */ cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; break; } if ((cts->flags & CCB_TRANS_DISC_ENB) == 0) { /* * Can't tag queue without disconnection. */ cts->flags &= ~CCB_TRANS_TAG_ENB; cts->valid |= CCB_TRANS_TQ_VALID; } if ((cpi.hba_inquiry & PI_TAG_ABLE) == 0 || (inq_data->flags & SID_CmdQue) == 0 || (device->queue_flags & SCP_QUEUE_DQUE) != 0 || (device->quirk->mintags == 0)) { /* * Can't tag on hardware that doesn't support, * doesn't have it enabled, or has broken tag support. */ cts->flags &= ~CCB_TRANS_TAG_ENB; } } qfrozen = FALSE; if ((cts->valid & CCB_TRANS_TQ_VALID) != 0 && (async_update == FALSE)) { int device_tagenb; /* * If we are transitioning from tags to no-tags or * vice-versa, we need to carefully freeze and restart * the queue so that we don't overlap tagged and non-tagged * commands. We also temporarily stop tags if there is * a change in transfer negotiation settings to allow * "tag-less" negotiation. */ if ((device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0) device_tagenb = TRUE; else device_tagenb = FALSE; if (((cts->flags & CCB_TRANS_TAG_ENB) != 0 && device_tagenb == FALSE) || ((cts->flags & CCB_TRANS_TAG_ENB) == 0 && device_tagenb == TRUE)) { if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) { /* * Delay change to use tags until after a * few commands have gone to this device so * the controller has time to perform transfer * negotiations without tagged messages getting * in the way. */ device->tag_delay_count = CAM_TAG_DELAY_COUNT; device->flags |= CAM_DEV_TAG_AFTER_COUNT; } else { xpt_freeze_devq(cts->ccb_h.path, /*count*/1); qfrozen = TRUE; device->inq_flags &= ~SID_CmdQue; xpt_dev_ccbq_resize(cts->ccb_h.path, sim->max_dev_openings); device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; device->tag_delay_count = 0; } } } if (async_update == FALSE) { /* * If we are currently performing tagged transactions to * this device and want to change its negotiation parameters, * go non-tagged for a bit to give the controller a chance to * negotiate unhampered by tag messages. */ if ((device->inq_flags & SID_CmdQue) != 0 && (cts->flags & (CCB_TRANS_SYNC_RATE_VALID| CCB_TRANS_SYNC_OFFSET_VALID| CCB_TRANS_BUS_WIDTH_VALID)) != 0) xpt_toggle_tags(cts->ccb_h.path); (*(sim->sim_action))(sim, (union ccb *)cts); } if (qfrozen) { struct ccb_relsim crs; xpt_setup_ccb(&crs.ccb_h, cts->ccb_h.path, /*priority*/1); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } } static void xpt_toggle_tags(struct cam_path *path) { + struct cam_ed *dev; + /* * Give controllers a chance to renegotiate * before starting tag operations. We * "toggle" tagged queuing off then on * which causes the tag enable command delay * counter to come into effect. */ - if ((path->device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 - || (path->device->inq_flags & SID_CmdQue) != 0) { + dev = path->device; + if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 + || ((dev->inq_flags & SID_CmdQue) != 0 + && (dev->inq_flags & (SID_Sync|SID_WBus16|SID_WBus32)) != 0)) { struct ccb_trans_settings cts; xpt_setup_ccb(&cts.ccb_h, path, 1); cts.flags = 0; cts.valid = CCB_TRANS_TQ_VALID; xpt_set_transfer_settings(&cts, path->device, /*async_update*/TRUE); cts.flags = CCB_TRANS_TAG_ENB; xpt_set_transfer_settings(&cts, path->device, /*async_update*/TRUE); } } static void xpt_start_tags(struct cam_path *path) { struct ccb_relsim crs; struct cam_ed *device; struct cam_sim *sim; int newopenings; device = path->device; sim = path->bus->sim; device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; xpt_freeze_devq(path, /*count*/1); device->inq_flags |= SID_CmdQue; newopenings = min(device->quirk->maxtags, sim->max_tagged_dev_openings); xpt_dev_ccbq_resize(path, newopenings); xpt_setup_ccb(&crs.ccb_h, path, /*priority*/1); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } static int busses_to_config; +static int busses_to_reset; static int xptconfigbuscountfunc(struct cam_eb *bus, void *arg) { - if (bus->path_id != CAM_XPT_PATH_ID) + if (bus->path_id != CAM_XPT_PATH_ID) { + struct cam_path path; + struct ccb_pathinq cpi; + int can_negotiate; + busses_to_config++; + xpt_compile_path(&path, NULL, bus->path_id, + CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); + xpt_setup_ccb(&cpi.ccb_h, &path, /*priority*/1); + cpi.ccb_h.func_code = XPT_PATH_INQ; + xpt_action((union ccb *)&cpi); + can_negotiate = cpi.hba_inquiry; + can_negotiate &= (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE); + if ((cpi.hba_misc & PIM_NOBUSRESET) == 0 + && can_negotiate) + busses_to_reset++; + xpt_release_path(&path); + } return(1); } static int xptconfigfunc(struct cam_eb *bus, void *arg) { struct cam_path *path; union ccb *work_ccb; if (bus->path_id != CAM_XPT_PATH_ID) { cam_status status; + int can_negotiate; work_ccb = xpt_alloc_ccb(); if ((status = xpt_create_path(&path, xpt_periph, bus->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)) !=CAM_REQ_CMP){ printf("xptconfigfunc: xpt_create_path failed with " "status %#x for bus %d\n", status, bus->path_id); printf("xptconfigfunc: halting bus configuration\n"); xpt_free_ccb(work_ccb); busses_to_config--; xpt_finishconfig(xpt_periph, NULL); return(0); } xpt_setup_ccb(&work_ccb->ccb_h, path, /*priority*/1); work_ccb->ccb_h.func_code = XPT_PATH_INQ; xpt_action(work_ccb); if (work_ccb->ccb_h.status != CAM_REQ_CMP) { printf("xptconfigfunc: CPI failed on bus %d " "with status %d\n", bus->path_id, work_ccb->ccb_h.status); xpt_finishconfig(xpt_periph, work_ccb); return(1); } - if ((work_ccb->cpi.hba_misc & PIM_NOBUSRESET) == 0) { + can_negotiate = work_ccb->cpi.hba_inquiry; + can_negotiate &= (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE); + if ((work_ccb->cpi.hba_misc & PIM_NOBUSRESET) == 0 + && (can_negotiate != 0)) { xpt_setup_ccb(&work_ccb->ccb_h, path, /*priority*/1); work_ccb->ccb_h.func_code = XPT_RESET_BUS; work_ccb->ccb_h.cbfcnp = NULL; CAM_DEBUG(path, CAM_DEBUG_SUBTRACE, ("Resetting Bus\n")); xpt_action(work_ccb); xpt_finishconfig(xpt_periph, work_ccb); } else { /* Act as though we performed a successful BUS RESET */ work_ccb->ccb_h.func_code = XPT_RESET_BUS; xpt_finishconfig(xpt_periph, work_ccb); } } return(1); } static void xpt_config(void *arg) { /* Now that interrupts are enabled, go find our devices */ #ifdef CAMDEBUG /* Setup debugging flags and path */ #ifdef CAM_DEBUG_FLAGS cam_dflags = CAM_DEBUG_FLAGS; #else /* !CAM_DEBUG_FLAGS */ cam_dflags = CAM_DEBUG_NONE; #endif /* CAM_DEBUG_FLAGS */ #ifdef CAM_DEBUG_BUS if (cam_dflags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, xpt_periph, CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN) != CAM_REQ_CMP) { printf("xpt_config: xpt_create_path() failed for debug" " target %d:%d:%d, debugging disabled\n", CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN); cam_dflags = CAM_DEBUG_NONE; } } else cam_dpath = NULL; #else /* !CAM_DEBUG_BUS */ cam_dpath = NULL; #endif /* CAM_DEBUG_BUS */ #endif /* CAMDEBUG */ /* * Scan all installed busses. */ xpt_for_all_busses(xptconfigbuscountfunc, NULL); if (busses_to_config == 0) { /* Call manually because we don't have any busses */ xpt_finishconfig(xpt_periph, NULL); } else { - if (SCSI_DELAY >= 2000) { + if (busses_to_reset > 0 && SCSI_DELAY >= 2000) { printf("Waiting %d seconds for SCSI " "devices to settle\n", SCSI_DELAY/1000); } xpt_for_all_busses(xptconfigfunc, NULL); } } /* * If the given device only has one peripheral attached to it, and if that * peripheral is the passthrough driver, announce it. This insures that the * user sees some sort of announcement for every peripheral in their system. */ static int xptpassannouncefunc(struct cam_ed *device, void *arg) { struct cam_periph *periph; int i; for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL; periph = SLIST_NEXT(periph, periph_links), i++); periph = SLIST_FIRST(&device->periphs); if ((i == 1) && (strncmp(periph->periph_name, "pass", 4) == 0)) xpt_announce_periph(periph, NULL); return(1); } static void xpt_finishconfig(struct cam_periph *periph, union ccb *done_ccb) { struct periph_driver **p_drv; int i; if (done_ccb != NULL) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_finishconfig\n")); switch(done_ccb->ccb_h.func_code) { case XPT_RESET_BUS: if (done_ccb->ccb_h.status == CAM_REQ_CMP) { done_ccb->ccb_h.func_code = XPT_SCAN_BUS; done_ccb->ccb_h.cbfcnp = xpt_finishconfig; xpt_action(done_ccb); return; } /* FALLTHROUGH */ case XPT_SCAN_BUS: default: xpt_free_path(done_ccb->ccb_h.path); busses_to_config--; break; } } if (busses_to_config == 0) { /* Register all the peripheral drivers */ /* XXX This will have to change when we have loadable modules */ p_drv = (struct periph_driver **)periphdriver_set.ls_items; for (i = 0; p_drv[i] != NULL; i++) { (*p_drv[i]->init)(); } /* * Check for devices with no "standard" peripheral driver * attached. For any devices like that, announce the * passthrough driver so the user will see something. */ xpt_for_all_devices(xptpassannouncefunc, NULL); /* Release our hook so that the boot can continue. */ config_intrhook_disestablish(xpt_config_hook); free(xpt_config_hook, M_TEMP); xpt_config_hook = NULL; } if (done_ccb != NULL) xpt_free_ccb(done_ccb); } static void xptaction(struct cam_sim *sim, union ccb *work_ccb) { CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n")); switch (work_ccb->ccb_h.func_code) { /* Common cases first */ case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi; cpi = &work_ccb->cpi; cpi->version_num = 1; /* XXX??? */ cpi->hba_inquiry = 0; cpi->target_sprt = 0; cpi->hba_misc = 0; cpi->hba_eng_cnt = 0; cpi->max_target = 0; cpi->max_lun = 0; cpi->initiator_id = 0; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "", HBA_IDLEN); strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN); cpi->unit_number = sim->unit_number; cpi->bus_id = sim->bus_id; cpi->base_transfer_speed = 0; cpi->ccb_h.status = CAM_REQ_CMP; xpt_done(work_ccb); break; } default: work_ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(work_ccb); break; } } /* * Should only be called by the machine interrupt dispatch routines, * so put these prototypes here instead of in the header. */ static void swi_camnet(void) { camisr(&cam_netq); } static void swi_cambio(void) { camisr(&cam_bioq); } static void camisr(cam_isrq_t *queue) { int s; struct ccb_hdr *ccb_h; s = splcam(); while ((ccb_h = TAILQ_FIRST(queue)) != NULL) { int runq; TAILQ_REMOVE(queue, ccb_h, sim_links.tqe); ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; splx(s); CAM_DEBUG(ccb_h->path, CAM_DEBUG_TRACE, ("camisr")); runq = FALSE; if (ccb_h->flags & CAM_HIGH_POWER) { struct highpowerlist *hphead; struct cam_ed *device; union ccb *send_ccb; hphead = &highpowerq; send_ccb = (union ccb *)STAILQ_FIRST(hphead); /* * Increment the count since this command is done. */ num_highpower++; /* * Any high powered commands queued up? */ if (send_ccb != NULL) { device = send_ccb->ccb_h.path->device; STAILQ_REMOVE_HEAD(hphead, xpt_links.stqe); xpt_release_devq(send_ccb->ccb_h.path->device, TRUE); } } if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) { struct cam_ed *dev; dev = ccb_h->path->device; s = splcam(); cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h); ccb_h->path->bus->sim->devq->send_active--; ccb_h->path->bus->sim->devq->send_openings++; splx(s); if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0 || ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 && (dev->ccbq.dev_active == 0))) { xpt_release_devq(ccb_h->path->device, /*run_queue*/TRUE); } if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 && (--dev->tag_delay_count == 0)) xpt_start_tags(ccb_h->path); if ((dev->ccbq.queue.entries > 0) && (dev->qfrozen_cnt == 0) && (device_is_send_queued(dev) == 0)) { runq = xpt_schedule_dev_sendq(ccb_h->path->bus, dev); } } if (ccb_h->status & CAM_RELEASE_SIMQ) { xpt_release_simq(ccb_h->path->bus->sim, /*run_queue*/TRUE); } else if ((ccb_h->flags & CAM_DEV_QFRZDIS) && (ccb_h->status & CAM_DEV_QFRZN)) { xpt_release_devq(ccb_h->path->device, /*run_queue*/TRUE); ccb_h->status &= ~CAM_DEV_QFRZN; } else if (runq) { xpt_run_dev_sendq(ccb_h->path->bus); } /* Call the peripheral driver's callback */ (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h); /* Raise IPL for while test */ s = splcam(); } splx(s); }