diff --git a/sys/arm/conf/ARNDALE b/sys/arm/conf/ARNDALE index f56d4de81668..06af3678f5a5 100644 --- a/sys/arm/conf/ARNDALE +++ b/sys/arm/conf/ARNDALE @@ -1,136 +1,137 @@ # Kernel configuration for Arndale Board (Exynos5 Dual development platform). # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ARNDALE include "../samsung/exynos/std.exynos5" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 ## options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options TMPFS options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT #Enable verbose sysinit messages options KDB options DDB #Enable the kernel debugger options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed options DIAGNOSTIC # NFS support options NFSCL #Network Filesystem Client options NFSLOCKD #Network Lock Manager options NFS_ROOT #NFS usable as /, requires NFSCLIENT # Uncomment this for NFS root #options NFS_ROOT #NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci options ROOTDEVNAME=\"ufs:/dev/da0\" #options SMP # Pseudo devices device loop device random device pty device md device gpio # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) #device iic #device iicbus # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter #FDT options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=exynos5250-arndale.dts diff --git a/sys/arm/conf/CUBIEBOARD b/sys/arm/conf/CUBIEBOARD index b2b486c49b57..b3fe7c48f577 100644 --- a/sys/arm/conf/CUBIEBOARD +++ b/sys/arm/conf/CUBIEBOARD @@ -1,134 +1,135 @@ # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD include "../allwinner/std.a10" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT #Enable verbose sysinit messages options KDB options DDB #Enable the kernel debugger options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER #Network Filesystem Server #options NFSCLIENT #Network Filesystem Client # Uncomment this for NFS root #options NFS_ROOT #NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device pass # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts diff --git a/sys/arm/conf/CUBIEBOARD2 b/sys/arm/conf/CUBIEBOARD2 index 43167282b739..1104f55b1bf2 100644 --- a/sys/arm/conf/CUBIEBOARD2 +++ b/sys/arm/conf/CUBIEBOARD2 @@ -1,134 +1,135 @@ # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT #Enable verbose sysinit messages options KDB options DDB #Enable the kernel debugger options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER #Network Filesystem Server #options NFSCLIENT #Network Filesystem Client # Uncomment this for NFS root #options NFS_ROOT #NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device pass # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts diff --git a/sys/arm/conf/DIGI-CCWMX53 b/sys/arm/conf/DIGI-CCWMX53 index 8a44844e39f9..bb2a9511d26e 100644 --- a/sys/arm/conf/DIGI-CCWMX53 +++ b/sys/arm/conf/DIGI-CCWMX53 @@ -1,179 +1,180 @@ # Kernel configuration for Digi ConnectCore Wi-i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident DIGI-CCWMX53 include "../freescale/imx/std.imx53" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # TMP Memory Filesystem options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=digi-ccwmx53.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 diff --git a/sys/arm/conf/EFIKA_MX b/sys/arm/conf/EFIKA_MX index fdfcb819e64c..e2b669350c6e 100644 --- a/sys/arm/conf/EFIKA_MX +++ b/sys/arm/conf/EFIKA_MX @@ -1,177 +1,178 @@ # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # TMP Memory Filesystem options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums diff --git a/sys/arm/conf/IMX53-QSB b/sys/arm/conf/IMX53-QSB index ab226e83b207..ff293dbbcfbf 100644 --- a/sys/arm/conf/IMX53-QSB +++ b/sys/arm/conf/IMX53-QSB @@ -1,179 +1,180 @@ # Kernel configuration for Freescale i.MX53 Quick Start Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53-QSB include "../freescale/imx/std.imx53" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options HZ=250 # 4ms scheduling quantum options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # TMP Memory Filesystem options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER #device ata #device atapci # Only for helper functions #device imxata #options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da #device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console #device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=imx53-qsb.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 diff --git a/sys/arm/conf/PANDABOARD b/sys/arm/conf/PANDABOARD index 0ebcf52352af..3c6132920905 100644 --- a/sys/arm/conf/PANDABOARD +++ b/sys/arm/conf/PANDABOARD @@ -1,143 +1,144 @@ # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "../ti/omap4/pandaboard/std.pandaboard" #To statically compile in device wiring instead of /boot/device.hints makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options HZ=100 options SCHED_4BSD #4BSD scheduler options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories device snp options BREAK_TO_DEBUGGER options NFSCL options NFS_ROOT #NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER options PREEMPTION # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards # I2C support device iicbus device iic device ti_i2c device loop device ether device mii device smc device smcphy device uart device uart_ns8250 device gpio device pty device pl310 # PL310 L2 cache controller # Debugging for use in -current #options VERBOSE_SYSINIT #Enable verbose sysinit messages options KDB options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed #options DIAGNOSTIC device md # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 device random # Entropy device # USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet device bpf # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts options VFP # vfp/neon