diff --git a/sys/cam/ctl/ctl_frontend_ioctl.c b/sys/cam/ctl/ctl_frontend_ioctl.c index af3a552af32a..e471a4c3e24c 100644 --- a/sys/cam/ctl/ctl_frontend_ioctl.c +++ b/sys/cam/ctl/ctl_frontend_ioctl.c @@ -1,643 +1,643 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2003-2009 Silicon Graphics International Corp. * Copyright (c) 2012 The FreeBSD Foundation * Copyright (c) 2015 Alexander Motin * Copyright (c) 2017 Jakub Wojciech Klama * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include typedef enum { CTL_IOCTL_INPROG, CTL_IOCTL_DATAMOVE, CTL_IOCTL_DONE } ctl_fe_ioctl_state; struct ctl_fe_ioctl_params { struct cv sem; struct mtx ioctl_mtx; ctl_fe_ioctl_state state; }; struct cfi_port { TAILQ_ENTRY(cfi_port) link; u_int cur_tag_num; struct cdev * dev; struct ctl_port port; }; struct cfi_softc { TAILQ_HEAD(, cfi_port) ports; }; static struct cfi_softc cfi_softc; static int cfi_init(void); static int cfi_shutdown(void); static void cfi_datamove(union ctl_io *io); static void cfi_done(union ctl_io *io); static int cfi_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td); static void cfi_ioctl_port_create(struct ctl_req *req); static void cfi_ioctl_port_remove(struct ctl_req *req); static struct cdevsw cfi_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_ioctl = ctl_ioctl_io }; static struct ctl_frontend cfi_frontend = { .name = "ioctl", .init = cfi_init, .ioctl = cfi_ioctl, .shutdown = cfi_shutdown, }; CTL_FRONTEND_DECLARE(ctlioctl, cfi_frontend); static int cfi_init(void) { struct cfi_softc *isoftc = &cfi_softc; struct cfi_port *cfi; struct ctl_port *port; int error = 0; memset(isoftc, 0, sizeof(*isoftc)); TAILQ_INIT(&isoftc->ports); cfi = malloc(sizeof(*cfi), M_CTL, M_WAITOK | M_ZERO); port = &cfi->port; port->frontend = &cfi_frontend; port->port_type = CTL_PORT_IOCTL; port->num_requested_ctl_io = 100; port->port_name = "ioctl"; port->fe_datamove = cfi_datamove; port->fe_done = cfi_done; port->physical_port = 0; port->targ_port = -1; if ((error = ctl_port_register(port)) != 0) { printf("%s: ioctl port registration failed\n", __func__); return (error); } ctl_port_online(port); TAILQ_INSERT_TAIL(&isoftc->ports, cfi, link); return (0); } static int cfi_shutdown(void) { struct cfi_softc *isoftc = &cfi_softc; struct cfi_port *cfi, *temp; struct ctl_port *port; int error; TAILQ_FOREACH_SAFE(cfi, &isoftc->ports, link, temp) { port = &cfi->port; ctl_port_offline(port); error = ctl_port_deregister(port); if (error != 0) { printf("%s: ctl_frontend_deregister() failed\n", __func__); return (error); } TAILQ_REMOVE(&isoftc->ports, cfi, link); free(cfi, M_CTL); } return (0); } static void cfi_ioctl_port_create(struct ctl_req *req) { struct cfi_softc *isoftc = &cfi_softc; struct cfi_port *cfi; struct ctl_port *port; struct make_dev_args args; const char *val; int retval; int pp = -1, vp = 0; val = dnvlist_get_string(req->args_nvl, "pp", NULL); if (val != NULL) pp = strtol(val, NULL, 10); val = dnvlist_get_string(req->args_nvl, "vp", NULL); if (val != NULL) vp = strtol(val, NULL, 10); if (pp != -1) { /* Check for duplicates */ TAILQ_FOREACH(cfi, &isoftc->ports, link) { if (pp == cfi->port.physical_port && vp == cfi->port.virtual_port) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "port %d already exists", pp); return; } } } else { /* Find free port number */ TAILQ_FOREACH(cfi, &isoftc->ports, link) { pp = MAX(pp, cfi->port.physical_port); } pp++; } cfi = malloc(sizeof(*cfi), M_CTL, M_WAITOK | M_ZERO); port = &cfi->port; port->frontend = &cfi_frontend; port->port_type = CTL_PORT_IOCTL; port->num_requested_ctl_io = 100; port->port_name = "ioctl"; port->fe_datamove = cfi_datamove; port->fe_done = cfi_done; port->physical_port = pp; port->virtual_port = vp; port->targ_port = -1; retval = ctl_port_register(port); if (retval != 0) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "ctl_port_register() failed with error %d", retval); free(cfi, M_CTL); return; } req->result_nvl = nvlist_create(0); nvlist_add_number(req->result_nvl, "port_id", port->targ_port); ctl_port_online(port); make_dev_args_init(&args); args.mda_devsw = &cfi_cdevsw; args.mda_uid = UID_ROOT; args.mda_gid = GID_OPERATOR; args.mda_mode = 0600; args.mda_si_drv1 = NULL; args.mda_si_drv2 = cfi; retval = make_dev_s(&args, &cfi->dev, "cam/ctl%d.%d", pp, vp); if (retval != 0) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "make_dev_s() failed with error %d", retval); ctl_port_offline(port); ctl_port_deregister(port); free(cfi, M_CTL); return; } req->status = CTL_LUN_OK; TAILQ_INSERT_TAIL(&isoftc->ports, cfi, link); } static void cfi_ioctl_port_remove(struct ctl_req *req) { struct cfi_softc *isoftc = &cfi_softc; struct cfi_port *cfi = NULL; const char *val; int port_id = -1; val = dnvlist_get_string(req->args_nvl, "port_id", NULL); if (val != NULL) port_id = strtol(val, NULL, 10); if (port_id == -1) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), - "port_id not provided"); + "Missing required argument: port_id"); return; } TAILQ_FOREACH(cfi, &isoftc->ports, link) { if (cfi->port.targ_port == port_id) break; } if (cfi == NULL) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "cannot find port %d", port_id); return; } if (cfi->port.physical_port == 0 && cfi->port.virtual_port == 0) { req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "cannot destroy default ioctl port"); return; } ctl_port_offline(&cfi->port); ctl_port_deregister(&cfi->port); TAILQ_REMOVE(&isoftc->ports, cfi, link); destroy_dev(cfi->dev); free(cfi, M_CTL); req->status = CTL_LUN_OK; } static int cfi_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { struct ctl_req *req; if (cmd == CTL_PORT_REQ) { req = (struct ctl_req *)addr; switch (req->reqtype) { case CTL_REQ_CREATE: cfi_ioctl_port_create(req); break; case CTL_REQ_REMOVE: cfi_ioctl_port_remove(req); break; default: req->status = CTL_LUN_ERROR; snprintf(req->error_str, sizeof(req->error_str), "Unsupported request type %d", req->reqtype); } return (0); } return (ENOTTY); } /* * Data movement routine for the CTL ioctl frontend port. */ static int ctl_ioctl_do_datamove(struct ctl_scsiio *ctsio) { struct ctl_sg_entry *ext_sglist, *kern_sglist; struct ctl_sg_entry ext_entry, kern_entry; int ext_sglen, ext_sg_entries, kern_sg_entries; int ext_sg_start, ext_offset; int len_to_copy; int kern_watermark, ext_watermark; int ext_sglist_malloced; int i, j; CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove\n")); /* * If this flag is set, fake the data transfer. */ if (ctsio->io_hdr.flags & CTL_FLAG_NO_DATAMOVE) { ext_sglist_malloced = 0; ctsio->ext_data_filled += ctsio->kern_data_len; ctsio->kern_data_resid = 0; goto bailout; } /* * To simplify things here, if we have a single buffer, stick it in * a S/G entry and just make it a single entry S/G list. */ if (ctsio->ext_sg_entries > 0) { int len_seen; ext_sglen = ctsio->ext_sg_entries * sizeof(*ext_sglist); ext_sglist = (struct ctl_sg_entry *)malloc(ext_sglen, M_CTL, M_WAITOK); ext_sglist_malloced = 1; if (copyin(ctsio->ext_data_ptr, ext_sglist, ext_sglen) != 0) { ctsio->io_hdr.port_status = 31343; goto bailout; } ext_sg_entries = ctsio->ext_sg_entries; ext_sg_start = ext_sg_entries; ext_offset = 0; len_seen = 0; for (i = 0; i < ext_sg_entries; i++) { if ((len_seen + ext_sglist[i].len) >= ctsio->ext_data_filled) { ext_sg_start = i; ext_offset = ctsio->ext_data_filled - len_seen; break; } len_seen += ext_sglist[i].len; } } else { ext_sglist = &ext_entry; ext_sglist_malloced = 0; ext_sglist->addr = ctsio->ext_data_ptr; ext_sglist->len = ctsio->ext_data_len; ext_sg_entries = 1; ext_sg_start = 0; ext_offset = ctsio->ext_data_filled; } if (ctsio->kern_sg_entries > 0) { kern_sglist = (struct ctl_sg_entry *)ctsio->kern_data_ptr; kern_sg_entries = ctsio->kern_sg_entries; } else { kern_sglist = &kern_entry; kern_sglist->addr = ctsio->kern_data_ptr; kern_sglist->len = ctsio->kern_data_len; kern_sg_entries = 1; } kern_watermark = 0; ext_watermark = ext_offset; for (i = ext_sg_start, j = 0; i < ext_sg_entries && j < kern_sg_entries;) { uint8_t *ext_ptr, *kern_ptr; len_to_copy = MIN(ext_sglist[i].len - ext_watermark, kern_sglist[j].len - kern_watermark); ext_ptr = (uint8_t *)ext_sglist[i].addr; ext_ptr = ext_ptr + ext_watermark; if (ctsio->io_hdr.flags & CTL_FLAG_BUS_ADDR) { /* * XXX KDM fix this! */ panic("need to implement bus address support"); #if 0 kern_ptr = bus_to_virt(kern_sglist[j].addr); #endif } else kern_ptr = (uint8_t *)kern_sglist[j].addr; kern_ptr = kern_ptr + kern_watermark; if ((ctsio->io_hdr.flags & CTL_FLAG_DATA_MASK) == CTL_FLAG_DATA_IN) { CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: copying %d " "bytes to user\n", len_to_copy)); CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: from %p " "to %p\n", kern_ptr, ext_ptr)); if (copyout(kern_ptr, ext_ptr, len_to_copy) != 0) { ctsio->io_hdr.port_status = 31344; goto bailout; } } else { CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: copying %d " "bytes from user\n", len_to_copy)); CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: from %p " "to %p\n", ext_ptr, kern_ptr)); if (copyin(ext_ptr, kern_ptr, len_to_copy)!= 0){ ctsio->io_hdr.port_status = 31345; goto bailout; } } ctsio->ext_data_filled += len_to_copy; ctsio->kern_data_resid -= len_to_copy; ext_watermark += len_to_copy; if (ext_sglist[i].len == ext_watermark) { i++; ext_watermark = 0; } kern_watermark += len_to_copy; if (kern_sglist[j].len == kern_watermark) { j++; kern_watermark = 0; } } CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: ext_sg_entries: %d, " "kern_sg_entries: %d\n", ext_sg_entries, kern_sg_entries)); CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: ext_data_len = %d, " "kern_data_len = %d\n", ctsio->ext_data_len, ctsio->kern_data_len)); bailout: if (ext_sglist_malloced != 0) free(ext_sglist, M_CTL); return (CTL_RETVAL_COMPLETE); } static void cfi_datamove(union ctl_io *io) { struct ctl_fe_ioctl_params *params; params = (struct ctl_fe_ioctl_params *) io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr; mtx_lock(¶ms->ioctl_mtx); params->state = CTL_IOCTL_DATAMOVE; cv_broadcast(¶ms->sem); mtx_unlock(¶ms->ioctl_mtx); } static void cfi_done(union ctl_io *io) { struct ctl_fe_ioctl_params *params; params = (struct ctl_fe_ioctl_params *) io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr; mtx_lock(¶ms->ioctl_mtx); params->state = CTL_IOCTL_DONE; cv_broadcast(¶ms->sem); mtx_unlock(¶ms->ioctl_mtx); } static int cfi_submit_wait(union ctl_io *io) { struct ctl_fe_ioctl_params params; ctl_fe_ioctl_state last_state; int done, retval; bzero(¶ms, sizeof(params)); mtx_init(¶ms.ioctl_mtx, "ctliocmtx", NULL, MTX_DEF); cv_init(¶ms.sem, "ctlioccv"); params.state = CTL_IOCTL_INPROG; last_state = params.state; io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ¶ms; CTL_DEBUG_PRINT(("cfi_submit_wait\n")); /* This shouldn't happen */ if ((retval = ctl_run(io)) != CTL_RETVAL_COMPLETE) return (retval); done = 0; do { mtx_lock(¶ms.ioctl_mtx); /* * Check the state here, and don't sleep if the state has * already changed (i.e. wakeup has already occurred, but we * weren't waiting yet). */ if (params.state == last_state) { /* XXX KDM cv_wait_sig instead? */ cv_wait(¶ms.sem, ¶ms.ioctl_mtx); } last_state = params.state; switch (params.state) { case CTL_IOCTL_INPROG: /* Why did we wake up? */ /* XXX KDM error here? */ mtx_unlock(¶ms.ioctl_mtx); break; case CTL_IOCTL_DATAMOVE: CTL_DEBUG_PRINT(("got CTL_IOCTL_DATAMOVE\n")); /* * change last_state back to INPROG to avoid * deadlock on subsequent data moves. */ params.state = last_state = CTL_IOCTL_INPROG; mtx_unlock(¶ms.ioctl_mtx); ctl_ioctl_do_datamove(&io->scsiio); /* * Note that in some cases, most notably writes, * this will queue the I/O and call us back later. * In other cases, generally reads, this routine * will immediately call back and wake us up, * probably using our own context. */ ctl_datamove_done(io, false); break; case CTL_IOCTL_DONE: mtx_unlock(¶ms.ioctl_mtx); CTL_DEBUG_PRINT(("got CTL_IOCTL_DONE\n")); done = 1; break; default: mtx_unlock(¶ms.ioctl_mtx); /* XXX KDM error here? */ break; } } while (done == 0); mtx_destroy(¶ms.ioctl_mtx); cv_destroy(¶ms.sem); return (CTL_RETVAL_COMPLETE); } int ctl_ioctl_io(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { struct cfi_port *cfi; union ctl_io *io; void *pool_tmp, *sc_tmp; int retval = 0; if (cmd != CTL_IO) return (ENOTTY); cfi = dev->si_drv2 == NULL ? TAILQ_FIRST(&cfi_softc.ports) : dev->si_drv2; /* * If we haven't been "enabled", don't allow any SCSI I/O * to this FETD. */ if ((cfi->port.status & CTL_PORT_STATUS_ONLINE) == 0) return (EPERM); io = ctl_alloc_io(cfi->port.ctl_pool_ref); /* * Need to save the pool reference so it doesn't get * spammed by the user's ctl_io. */ pool_tmp = io->io_hdr.pool; sc_tmp = CTL_SOFTC(io); memcpy(io, (void *)addr, sizeof(*io)); io->io_hdr.pool = pool_tmp; CTL_SOFTC(io) = sc_tmp; TAILQ_INIT(&io->io_hdr.blocked_queue); /* * No status yet, so make sure the status is set properly. */ io->io_hdr.status = CTL_STATUS_NONE; /* * The user sets the initiator ID, target and LUN IDs. */ io->io_hdr.nexus.targ_port = cfi->port.targ_port; io->io_hdr.flags |= CTL_FLAG_USER_REQ; if ((io->io_hdr.io_type == CTL_IO_SCSI) && (io->scsiio.tag_type != CTL_TAG_UNTAGGED)) io->scsiio.tag_num = atomic_fetchadd_int(&cfi->cur_tag_num, 1); retval = cfi_submit_wait(io); if (retval == 0) memcpy((void *)addr, io, sizeof(*io)); ctl_free_io(io); return (retval); } diff --git a/usr.sbin/ctladm/ctladm.8 b/usr.sbin/ctladm/ctladm.8 index a7eb1d58cbbf..6470f5d5a8ee 100644 --- a/usr.sbin/ctladm/ctladm.8 +++ b/usr.sbin/ctladm/ctladm.8 @@ -1,1145 +1,1144 @@ .\" .\" Copyright (c) 2003 Silicon Graphics International Corp. .\" Copyright (c) 2015-2021 Alexander Motin .\" Copyright (c) 2018 Marcelo Araujo .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions, and the following disclaimer, .\" without modification. .\" 2. Redistributions in binary form must reproduce at minimum a disclaimer .\" substantially similar to the "NO WARRANTY" disclaimer below .\" ("Disclaimer") and any redistribution must be conditioned upon .\" including a substantially similar Disclaimer requirement for further .\" binary redistribution. .\" .\" NO WARRANTY .\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS .\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT .\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR .\" A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT .\" HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, .\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGES. .\" .\" ctladm utility man page. .\" .\" Author: Ken Merry .\" .\" $Id: //depot/users/kenm/FreeBSD-test2/usr.sbin/ctladm/ctladm.8#3 $ .\" .Dd June 6, 2024 .Dt CTLADM 8 .Os .Sh NAME .Nm ctladm .Nd CAM Target Layer control utility .Sh SYNOPSIS .Nm .Aq Ar command .Op lun .Op generic args .Op command args .Nm .Ic tur .Aq lun .Op general options .Nm .Ic inquiry .Aq lun .Op general options .Nm .Ic reqsense .Aq lun .Op general options .Nm .Ic reportluns .Aq lun .Op general options .Nm .Ic read .Aq lun .Op general options .Aq Fl l Ar lba .Aq Fl d Ar datalen .Aq Fl f Ar file|- .Aq Fl b Ar blocksize_bytes .Op Fl c Ar cdbsize .Op Fl N .Nm .Ic write .Aq lun .Op general options .Aq Fl l Ar lba .Aq Fl d Ar datalen .Aq Fl f Ar file|- .Aq Fl b Ar blocksize_bytes .Op Fl c Ar cdbsize .Op Fl N .Nm .Ic readcap .Aq lun .Op general options .Op Fl c Ar cdbsize .Nm .Ic modesense .Aq lun .Aq Fl m Ar page | Fl l .Op Fl P Ar pc .Op Fl d .Op Fl S Ar subpage .Op Fl c Ar size .Nm .Ic start .Aq lun .Op general options .Op Fl i .Op Fl o .Nm .Ic stop .Aq lun .Op general options .Op Fl i .Op Fl o .Nm .Ic synccache .Aq lun .Op general options .Op Fl l Ar lba .Op Fl b Ar blockcount .Op Fl r .Op Fl i .Op Fl c Ar cdbsize .Nm .Ic lunlist .Nm .Ic delay .Aq lun .Aq Fl l Ar datamove|done .Aq Fl t Ar secs .Op Fl T Ar oneshot|cont .Nm .Ic inject .Aq Fl i Ar action .Aq Fl p Ar pattern .Op Fl r Ar lba,len .Op Fl s Ar len fmt Op Ar args .Op Fl c .Op Fl d Ar delete_id .Nm .Ic create .Aq Fl b Ar backend .Op Fl B Ar blocksize .Op Fl d Ar device_id .Op Fl l Ar lun_id .Op Fl o Ar name=value .Op Fl s Ar size_bytes .Op Fl S Ar serial_num .Op Fl t Ar device_type .Nm .Ic remove .Aq Fl b Ar backend .Aq Fl l Ar lun_id .Op Fl o Ar name=value .Nm .Ic modify .Aq Fl b Ar backend .Aq Fl l Ar lun_id .Op Fl o Ar name=value .Aq Fl s Ar size_bytes .Nm .Ic devlist .Op Fl b Ar backend .Op Fl v .Op Fl x .Nm .Ic port .Op Fl c .Op Fl d Ar driver .Op Fl o Ar on|off .Op Fl w Ar wwpn .Op Fl W Ar wwnn .Op Fl O Ar name=value .Op Fl p Ar targ_port .Op Fl r .Op Fl t Ar fe_type .Nm .Ic portlist .Op Fl f Ar frontend .Op Fl i .Op Fl l .Op Fl p Ar targ_port .Op Fl q .Op Fl v .Op Fl x .Nm .Ic lunmap .Aq Fl p Ar targ_port .Op Fl l Ar pLUN .Op Fl L Ar cLUN .Nm .Ic dumpooa .Nm .Ic dumpstructs .Nm .Ic islist .Op Fl v .Op Fl x .Nm .Ic islogout .Aq Fl a | Fl c Ar connection-id | Fl i Ar name | Fl p Ar portal .Nm .Ic isterminate .Aq Fl a | Fl c Ar connection-id | Fl i Ar name | Fl p Ar portal .Nm .Ic help .Sh DESCRIPTION The .Nm utility is designed to provide a way to access and control the CAM Target Layer (CTL). It provides a way to send .Tn SCSI commands to the CTL layer, and also provides some meta-commands that utilize .Tn SCSI commands. (For instance, the .Ic lunlist command is implemented using the .Tn SCSI REPORT LUNS and INQUIRY commands.) .Pp The .Nm utility has a number of primary functions, many of which require a device identifier. The device identifier takes the following form: .Bl -tag -width 14n .It lun Specify the LUN number to operate on. .El Many of the primary functions of the .Nm utility take the following optional arguments: .Bl -tag -width 10n .It Fl C Ar retries Specify the number of times to retry a command in the event of failure. .It Fl D Ar device Specify the device to open. This allows opening a device other than the default device, .Pa /dev/cam/ctl , to be opened for sending commands. .It Fl I Ar id Specify the initiator number to use. By default, .Nm will use 7 as the initiator number. .El .Pp Primary commands: .Bl -tag -width 11n .It Ic tur Send the .Tn SCSI TEST UNIT READY command to the device and report whether or not it is ready. .It Ic inquiry Send the .Tn SCSI INQUIRY command to the device and display some of the returned inquiry data. .It Ic reqsense Send the .Tn SCSI REQUEST SENSE command to the device and display the returned sense information. .It Ic reportluns Send the .Tn SCSI REPORT LUNS command to the device and display supported LUNs. .It Ic read Send a .Tn SCSI READ command to the device, and write the requested data to a file or stdout. .Bl -tag -width 12n .It Fl l Ar lba Specify the starting Logical Block Address for the READ. This can be specified in decimal, octal (starting with 0), hexadecimal (starting with 0x) or any other base supported by .Xr strtoull 3 . .It Fl d Ar datalen Specify the length, in 512 byte blocks, of the READ request. .It Fl f Ar file Specify the destination for the data read by the READ command. Either a filename or .Sq - for stdout may be specified. .It Fl c Ar cdbsize Specify the minimum .Tn SCSI CDB (Command Data Block) size to be used for the READ request. Allowable values are 6, 10, 12 and 16. Depending upon the LBA and amount of data requested, a larger CDB size may be used to satisfy the request. (e.g., for LBAs above 0xffffffff, READ(16) must be used to satisfy the request.) .It Fl b Ar blocksize Specify the blocksize of the underlying .Tn SCSI device, so the transfer length can be calculated accurately. The blocksize can be obtained via the .Tn SCSI READ CAPACITY command. .It Fl N Do not copy data to .Nm from the kernel when doing a read, just execute the command without copying data. This is to be used for performance testing. .El .It Ic write Read data from a file or stdin, and write the data to the device using the .Tn SCSI WRITE command. .Bl -tag -width 12n .It Fl l Ar lba Specify the starting Logical Block Address for the WRITE. This can be specified in decimal, octal (starting with 0), hexadecimal (starting with 0x) or any other base supported by .Xr strtoull 3 . .It Fl d Ar atalen Specify the length, in 512 byte blocks, of the WRITE request. .It Fl f Ar file Specify the source for the data to be written by the WRITE command. Either a filename or .Sq - for stdin may be specified. .It Fl c Ar cdbsize Specify the minimum .Tn SCSI CDB (Command Data Block) size to be used for the READ request. Allowable values are 6, 10, 12 and 16. Depending upon the LBA and amount of data requested, a larger CDB size may be used to satisfy the request. (e.g., for LBAs above 0xffffffff, READ(16) must be used to satisfy the request.) .It Fl b Ar blocksize Specify the blocksize of the underlying .Tn SCSI device, so the transfer length can be calculated accurately. The blocksize can be obtained via the .Tn SCSI READ CAPACITY command. .It Fl N Do not copy data to .Nm to the kernel when doing a write, just execute the command without copying data. This is to be used for performance testing. .El .It Ic readcap Send the .Tn SCSI READ CAPACITY command to the device and display the device size and device block size. By default, READ CAPACITY(10) is used. If the device returns a maximum LBA of 0xffffffff, however, .Nm will automatically issue a READ CAPACITY(16), which is implemented as a service action of the SERVICE ACTION IN(16) opcode. The user can specify the minimum CDB size with the .Fl c argument. Valid values for the .Fl c option are 10 and 16. If a 10 byte CDB is specified, the request will be automatically reissued with a 16 byte CDB if the maximum LBA returned is 0xffffffff. .It Ic modesense Send a .Tn SCSI MODE SENSE command to the device, and display the requested mode page(s) or page list. .Bl -tag -width 10n .It Fl m Ar page Specify the mode page to display. This option and the .Fl l option are mutually exclusive. One of the two must be specified, though. Mode page numbers may be specified in decimal or hexadecimal. .It Fl l Request that the list of mode pages supported by the device be returned. This option and the .Fl m option are mutually exclusive. One of the two must be specified, though. .It Fl P Ar pc Specify the mode page control value. Possible values are: .Bl -tag -width 2n -compact .It 0 Current values. .It 1 Changeable value bitmask. .It 2 Default values. .It 3 Saved values. .El .It Fl d Disable block descriptors when sending the mode sense request. .It Fl S Ar subpage Specify the subpage used with the mode sense request. .It Fl c Ar cdbsize Specify the CDB size used for the mode sense request. Supported values are 6 and 10. .El .It Ic start Send the .Tn SCSI START STOP UNIT command to the specified LUN with the start bit set. .Bl -tag -width 4n .It Fl i Set the immediate bit in the CDB. Note that CTL does not support the immediate bit, so this is primarily useful for making sure that CTL returns the proper error. .El .It Ic stop Send the .Tn SCSI START STOP UNIT command to the specified LUN with the start bit cleared. We use an ordered tag to stop the LUN, so we can guarantee that all pending I/O executes before it is stopped. (CTL guarantees this anyway, but .Nm sends an ordered tag for completeness.) .Bl -tag -width 4n .It Fl i Set the immediate bit in the CDB. Note that CTL does not support the immediate bit, so this is primarily useful for making sure that CTL returns the proper error. .El .It Ic synccache Send the .Tn SCSI SYNCHRONIZE CACHE command to the device. By default, SYNCHRONIZE CACHE(10) is used. If the specified starting LBA is greater than 0xffffffff or the length is greater than 0xffff, though, SYNCHRONIZE CACHE(16) will be used. The 16 byte command will also be used if the user specifies a 16 byte CDB with the .Fl c argument. .Bl -tag -width 14n .It Fl l Ar lba Specify the starting LBA of the cache region to synchronize. This option is a no-op for CTL. If you send a SYNCHRONIZE CACHE command, it will sync the cache for the entire LUN. .It Fl b Ar blockcount Specify the length of the cache region to synchronize. This option is a no-op for CTL. If you send a SYNCHRONIZE CACHE command, it will sync the cache for the entire LUN. .It Fl r Specify relative addressing for the starting LBA. CTL does not support relative addressing, since it only works for linked commands, and CTL does not support linked commands. .It Fl i Tell the target to return status immediately after issuing the SYNCHRONIZE CACHE command rather than waiting for the cache to finish syncing. CTL does not support this bit. .It Fl c Ar cdbsize Specify the minimum CDB size. Valid values are 10 and 16 bytes. .El .It Ic lunlist List all LUNs registered with CTL. Because this command uses the ioctl port, it will only work when the FETDs (Front End Target Drivers) are enabled. This command is the equivalent of doing a REPORT LUNS on one LUN and then an INQUIRY on each LUN in the system. .It Ic delay Delay commands at the given location. There are two places where commands may be delayed currently: before data is transferred .Pq Dq datamove and just prior to sending status to the host .Pq Dq done . One of the two must be supplied as an argument to the .Fl l option. The .Fl t option must also be specified. .Bl -tag -width 12n .It Fl l Ar delayloc Delay command(s) at the specified location. This can either be at the data movement stage (datamove) or prior to command completion (done). .It Fl t Ar delaytime Delay command(s) for the specified number of seconds. This must be specified. If set to 0, it will clear out any previously set delay for this particular location (datamove or done). .It Fl T Ar delaytype Specify the delay type. By default, the .Ic delay option will delay the next command sent to the given LUN. With the .Fl T Ar cont option, every command will be delayed by the specified period of time. With the .Fl T Ar oneshot the next command sent to the given LUN will be delayed and all subsequent commands will be completed normally. This is the default. .El .It Ic inject Inject the specified type of error for the LUN specified, when a command that matches the given pattern is seen. The sense data returned is in either fixed or descriptor format, depending upon the status of the D_SENSE bit in the control mode page (page 0xa) for the LUN. .Pp Errors are only injected for commands that have not already failed for other reasons. By default, only the first command matching the pattern specified is returned with the supplied error. .Pp If the .Fl c flag is specified, all commands matching the pattern will be returned with the specified error until the error injection command is deleted with .Fl d flag. .Bl -tag -width 17n .It Fl i Ar action Specify the error to return: .Bl -tag -width 10n .It aborted Return the next matching command on the specified LUN with the sense key ABORTED COMMAND (0x0b), and the ASC/ASCQ 0x45,0x00 ("Select or reselect failure"). .It mediumerr Return the next matching command on the specified LUN with the sense key MEDIUM ERROR (0x03) and the ASC/ASCQ 0x11,0x00 ("Unrecovered read error") for reads, or ASC/ASCQ 0x0c,0x02 ("Write error - auto reallocation failed") for write errors. .It ua Return the next matching command on the specified LUN with the sense key UNIT ATTENTION (0x06) and the ASC/ASCQ 0x29,0x00 ("POWER ON, RESET, OR BUS DEVICE RESET OCCURRED"). .It custom Return the next matching command on the specified LUN with the supplied sense data. The .Fl s argument must be specified. .El .It Fl p Ar pattern Specify which commands should be returned with the given error. .Bl -tag -width 10n .It read The error should apply to READ(6), READ(10), READ(12), READ(16), etc. .It write The error should apply to WRITE(6), WRITE(10), WRITE(12), WRITE(16), WRITE AND VERIFY(10), etc. .It rw The error should apply to both read and write type commands. .It readcap The error should apply to READ CAPACITY(10) and READ CAPACITY(16) commands. .It tur The error should apply to TEST UNIT READY commands. .It any The error should apply to any command. .El .It Fl r Ar lba,len Specify the starting lba and length of the range of LBAs which should trigger an error. This option is only applies when read and/or write patterns are specified. If used with other command types, the error will never be triggered. .It Fl s Ar len fmt Op Ar args Specify the sense data that is to be returned for custom actions. If the format is .Sq - , len bytes of sense data will be read from standard input and written to the sense buffer. If len is longer than 252 bytes (the maximum allowable .Tn SCSI sense data length), it will be truncated to that length. The sense data format is described in .Xr cam_cdbparse 3 . .It Fl c The error injection should be persistent, instead of happening once. Persistent errors must be deleted with the .Fl d argument. .It Fl d Ar delete_id Delete the specified error injection serial number. The serial number is returned when the error is injected. .El .It Ic port Perform one of several CTL frontend port operations. Either get a list of frontend ports .Pq Fl l , create a new frontend port .Pq Fl c , destroy a frontend port .Pq Fl r , turn one or more frontends on or off .Pq Fl o Ar on|off , or set the World Wide Node Name .Pq Fl w Ar wwnn or World Wide Port Name .Pq Fl W Ar wwpn for a given port. One of .Fl c , .Fl r , .Fl l , .Fl o , or .Fl w or .Fl W must be specified. The WWNN and WWPN may both be specified at the same time, but cannot be combined with enabling/disabling or listing ports. .Bl -tag -width 12n .It Fl c Create new frontend port. .It Fl d Ar driver Specify the name of the frontend driver used by the .Pq Fl c or .Pq Fl r subcommands. Valid driver names include .Dq ioctl , .Dq iscsi , and .Dq nvmf , but more can be added by external kernel modules. .It Fl o Ar on|off Turn the specified CTL frontend ports on or off. If no port number or port type is specified, all ports are turned on or off. .It Fl O Ar pp|vp Specify generic options on the ioctl frontend port. The list of recognized options is driver-dependent. The .Dq ioctl driver recognizes .Dq pp and .Dq vp . The .Dq iscsi driver recongizes .Dq cfiscsi_portal_group_tag , .Dq cfiscsi_target , and .Dq cfiscsi_target_alias . The .Dq nvmf driver recognizes .Dq subnqn , .Dq portid , .Dq max_io_qsize , .Dq enable_timeout , .Dq ioccsz , .Dq nn , and .Dq serial . .It Fl p Ar targ_port Specify the frontend port number. The port numbers can be found in the frontend port list. .It Fl r -Remove port specified with -.Pq Fl p Ar targ_port . +Remove a port. .It Fl t Ar fe_type Specify the frontend type used by the .Pq Fl o , .Pq Fl w , and .Pq Fl W subcommands. Currently defined port types are .Dq fc (Fibre Channel), .Dq scsi (Parallel SCSI), .Dq ioctl (CTL ioctl interface), and .Dq internal (CTL CAM SIM). .It Fl w Ar wwnn Set the World Wide Node Name for the given port. The .Fl p argument must be specified, since this is only possible to implement on a single port. As a general rule, the WWNN should be the same across all ports on the system. .It Fl W Ar wwpn Set the World Wide Port Name for the given port. The .Fl p argument must be specified, since this is only possible to implement on a single port. As a general rule, the WWPN must be different for every port in the system. .El .It Ic portlist List CTL frontend ports. .Bl -tag -width 12n .It Fl f Ar frontend Specify the frontend type. .It Fl i Report target and connected initiators addresses. .It Fl l Report LUN mapping. .It Fl p Ar targ_port Specify the frontend port number. .It Fl q Omit the header in the port list output. .It Fl v Enable verbose output (report all port options). .It Fl x Output the port list in XML format. .El .It Ic lunmap Change LUN mapping for specified port. If both .Ar pLUN and .Ar cLUN are specified -- LUN will be mapped. If .Ar pLUN is specified, but .Ar cLUN is not -- LUN will be unmapped. If neither .Ar pLUN nor .Ar cLUN are specified -- LUN mapping will be disabled, exposing all CTL LUNs. .Bl -tag -width 12n .It Fl p Ar targ_port Specify the frontend port number. .It Fl l Ar pLUN LUN number visible by specified port. .It Fl L Ar cLUN CTL LUN number. .El .It Ic dumpooa Dump the OOA (Order Of Arrival) queue for each LUN registered with CTL. .It Ic dumpstructs Dump the CTL structures to the console. .It Ic create Create a new LUN. The backend must be specified, and depending upon the backend requested, some of the other options may be required. If the LUN is created successfully, the LUN configuration will be displayed. If LUN creation fails, a message will be displayed describing the failure. .Bl -tag -width 14n .It Fl b Ar backend The .Fl b flag is required. This specifies the name backend to use when creating the LUN. Examples are .Dq ramdisk and .Dq block . .It Fl B Ar blocksize Specify the blocksize of the backend in bytes. .It Fl d Ar device_id Specify the LUN-associated string to use in the .Tn SCSI INQUIRY VPD page 0x83 data. .It Fl l Ar lun_id Request that a particular LUN number be assigned. If the requested LUN number is not available, the request will fail. .It Fl o Ar name=value Specify a backend-specific name/value pair. Multiple .Fl o arguments may be specified. Refer to the backend documentation for arguments that may be used. .It Fl s Ar size_bytes Specify the size of the LUN in bytes. Some backends may allow setting the size (e.g. the ramdisk backend) and for others the size may be implicit (e.g. the block backend). .It Fl S Ar serial_num Specify the serial number to be used in the .Tn SCSI INQUIRY VPD page 0x80 data. .It Fl t Ar device_type Specify the numeric SCSI device type to use when creating the LUN. If this flag is not used, the type of LUN created is backend-specific. Not all LUN types are supported. Currently CTL supports Direct Access (type 0), Processor (type 3) and CD/DVD (type 5) LUNs. The backend requested may or may not support all of the LUN types that CTL supports. .El .It Ic remove Remove a LUN. The backend must be specified, and the LUN number must also be specified. Backend-specific options may also be specified with the .Fl o flag. .Bl -tag -width 14n .It Fl b Ar backend Specify the backend that owns the LUN to be removed. Examples are .Dq ramdisk and .Dq block . .It Fl l Ar lun_id Specify the LUN number to remove. .It Fl o Ar name=value Specify a backend-specific name/value pair. Multiple .Fl o arguments may be specified. Refer to the backend documentation for arguments that may be used. .El .It Ic modify Modify a LUN size. The backend, the LUN number, and the size must be specified. .Bl -tag -width 14n .It Fl b Ar backend Specify the backend that owns the LUN to be modified. Examples are .Dq ramdisk and .Dq block . .It Fl l Ar lun_id Specify the LUN number to modify. .It Fl o Ar name=value Specify a backend-specific name/value pair. Multiple .Fl o arguments may be specified. Refer to the backend documentation for arguments that may be used. .It Fl s Ar size_bytes Specify the size of the LUN in bytes. For the .Dq block backend, an .Dq auto keyword may be passed instead; this will make CTL use the size of backing file or device. .El .It Ic devlist Get a list of all configured LUNs. This also includes the LUN size and blocksize, serial number and device ID. .Bl -tag -width 11n .It Fl b Ar backend Specify the backend. This restricts the LUN list to the named backend. Examples are .Dq ramdisk and .Dq block . .It Fl v Be verbose. This will also display any backend-specific LUN attributes in addition to the standard per-LUN information. .It Fl x Dump the raw XML. The LUN list information from the kernel comes in XML format, and this option allows the display of the raw XML data. This option and the .Fl v and .Fl b options are mutually exclusive. If you specify .Fl x , the entire LUN database is displayed in XML format. .El .It Ic islist Get a list of currently running iSCSI sessions. This includes initiator and target names and the unique connection IDs. .Bl -tag -width 11n .It Fl v Verbose mode. .It Fl x Dump the raw XML. The sessions list information from the kernel comes in XML format, and this option allows the display of the raw XML data. .El .It Ic islogout Ask the initiator to log out iSCSI sessions matching criteria. .Bl -tag -width 11n .It Fl a Log out all sessions. .It Fl c Specify connection ID. .It Fl i Specify initiator name. .It Fl p Specify initiator portal (hostname or IP address). .El .It Ic isterminate Forcibly terminate iSCSI sessions matching criteria. .Bl -tag -width 11n .It Fl a Terminate all sessions. .It Fl c Specify connection ID. .It Fl i Specify initiator name. .It Fl p Specify initiator portal (hostname or IP address). .El .It Ic help Display .Nm usage information. .El .Sh OPTIONS Number of additional configuration options may be specified for LUNs. Some options are global, others are backend-specific. .Pp Global options: .Bl -tag -width 12n .It Va vendor Specifies LUN vendor string up to 8 chars. .It Va product Specifies LUN product string up to 16 chars. .It Va revision Specifies LUN revision string up to 4 chars. .It Va scsiname Specifies LUN SCSI name string. .It Va eui Specifies LUN EUI-64 identifier. .It Va naa Specifies LUN NAA identifier. .It Va uuid Specifies LUN locally assigned RFC 4122 UUID identifier. EUI, NAA or UUID identifier should be set to UNIQUE value to allow EXTENDED COPY command access the LUN. Non-unique LUN identifiers may lead to data corruption. Some initiators may not support later introduced UUID identifiers. .It Va ident_info Specified LUN identification information (string or 0x + hex). .It Va text_ident_info Specified LUN text identification information (UTF-8 string). .It Va ha_role Setting to "primary" or "secondary" overrides default role of the node in HA cluster, set by kern.cam.ctl.ha_role sysctl. .It Va insecure_tpc Setting to "on" allows EXTENDED COPY command sent to this LUN access other LUNs on this host, not accessible otherwise. This allows to offload copying between different iSCSI targets residing on the same host in trusted environments. .It Va readcache Set to "off", disables read caching for the LUN, if supported by the backend. .It Va readonly Set to "on", blocks all media write operations to the LUN, reporting it as write protected. .It Va removable Set to "on", makes LUN removable. .It Va reordering Set to "unrestricted", allows target to process commands with SIMPLE task attribute in arbitrary order. Any data integrity exposures related to command sequence order shall be explicitly handled by the application client through the selection of appropriate commands and task attributes. The default value is "restricted". It improves data integrity, but may introduce some additional delays. .It Va serseq Set to "on" to fully serialize consecutive reads/writes. Set to "read" to fully serialize consecutive reads. Set to "soft" to slightly serialize consecutive reads. Set to "off" to allow them be issued in parallel. Parallel issue of consecutive operations may confuse logic of the backing file system, hurting performance; but it may improve performance of backing stores without prefetch/write-back. .It Va pblocksize .It Va pblockoffset Specify physical block size and offset of the device. .It Va ublocksize .It Va ublockoffset Specify UNMAP block size and offset of the device. .It Va rpm Specifies medium rotation rate of the device: 0 -- not reported, 1 -- non-rotating (SSD), >1024 -- value in revolutions per minute. .It Va formfactor Specifies nominal form factor of the device: 0 -- not reported, 1 -- 5.25", 2 -- 3.5", 3 -- 2.5", 4 -- 1.8", 5 -- less then 1.8". .It Va temperature .It Va reftemperature Specify current and reference (maximum) temperatures of the device. .It Va provisioning_type When UNMAP support is enabled, this option specifies provisioning type: "resource", "thin" or "unknown". Default value is "thin". Logical units without UNMAP support are reported as fully provisioned. .It Va unmap Setting to "on" or "off" controls UNMAP support for the logical unit. Default value is "on" if supported by the backend. .It Va unmap_max_lba .It Va unmap_max_descr Specify maximum allowed number of LBAs and block descriptors per UNMAP command to report in Block Limits VPD page. .It Va write_same_max_lba Specify maximum allowed number of LBAs per WRITE SAME command to report in Block Limits VPD page. .It Va avail-threshold .It Va used-threshold .It Va pool-avail-threshold .It Va pool-used-threshold Set per-LUN/-pool thin provisioning soft thresholds. LUN will establish UNIT ATTENTION condition if its or pool available space get below configured avail values, or its or pool used space get above configured used values. Pool thresholds are working only for ZVOL-backed LUNs. .It Va writecache Set to "off", disables write caching for the LUN, if supported by the backend. .El .Pp Options specific for block backend: .Bl -tag -width 12n .It Va file Specifies file or device name to use for backing store. .It Va num_threads Specifies number of backend threads to use for this LUN. .El .Pp Options specific for ramdisk backend: .Bl -tag -width 12n .It Va capacity Specifies capacity of backing store (maximum RAM for data). The default value is zero, that disables backing store completely, making all writes go to nowhere, while all reads return zeroes. .El .Sh EXAMPLES .Pp Send a .Tn SCSI TEST UNIT READY command to LUN 1. .Pp .Dl ctladm tur 1 .Pp Display the list of mode pages supported by LUN 1. .Pp .Dl ctladm modesense 1 -l .Pp Display the saved version of the Control mode page (page 10) on LUN 0. Disable fetching block descriptors, and use a 10 byte MODE SENSE command instead of the default 6 byte command. .Pp .Dl ctladm modesense 0 -m 10 -P 3 -d -c 10 .Pp Read the first 512 byte block from LUN 2 and dump it to the file .Bd -literal .Dl ctladm read 2 -l 0 -d 1 -b 512 -f - > foo .Ed .Pp Read 10240 bytes from the file .Pa /tmp/bar and write it to LUN 3. starting at LBA 0xff432140. .Pp .Bd -literal .Dl ctladm write 3 -l 0xff432140 -d 20 -b 512 -f /tmp/bar .Ed .Pp Create a LUN with the .Dq fake ramdisk as a backing store. The LUN will claim to have a size of approximately 10 terabytes, while having no real data store (all written data are lost). .Pp .Dl ctladm create -b ramdisk -s 10485760000000000 .Pp Create a thin provisioned LUN with a ramdisk as a backing store. The LUN will have maximal backing store capacity of 10 gigabytes, while reporting size of 10 terabytes, .Pp .Dl ctladm create -b ramdisk -s 10T -o capacity=10G .Pp Create a LUN using the block backend, specify the ZFS volume .Pa tank/example as the backing store, and specify the .Tn SCSI VPD page 0x80 and 0x83 serial number .Fl ( S ) and device ID .Fl ( d ) . The size of the LUN will be derived from the size of the ZVOL. .Pp .Dl ctladm create -b block -o file=/dev/zvol/tank/example -S MYSERIAL321 -d MYDEVID123 .Pp Use to specify generic options on ioctl frontend port, now it is only possible to set pp and/or vp port number. .Pp .Dl ctladm port -c -O pp=11 -O vp=12 .Pp Remove specified targ_port. .Pp .Dl ctladm port -r -p 4 .Pp .Pp Remove LUN 12, which is handled by the block backend, from the system. .Pp .Dl ctladm remove -b block -l 12 .Pp List configured LUNs in the system, along with their backend and serial number. This works when the Front End Target Drivers are enabled or disabled. .Pp .Dl ctladm devlist .Pp List all LUNs in the system, along with their inquiry data and device type. This only works when the FETDs are enabled, since the commands go through the ioctl port. .Pp .Dl ctladm lunlist .Pp Inject a medium error on LUN 6 for every read that covers the first 512 blocks of the LUN. .Pp .Dl ctladm inject 6 -i mediumerr -p read -r 0,512 -c .Pp Inject a custom error on LUN 6 for the next TEST UNIT READY command only. This will result in a sense key of NOT READY (0x02), and an ASC/ASCQ of 0x04,0x02 ("Logical unit not ready, initializing command required"). .Pp .Bd -literal -offset indent ctladm inject 6 -i custom -p tur -s 18 "f0 0 02 s12 04 02" .Ed .Sh SEE ALSO .Xr cam 3 , .Xr cam_cdbparse 3 , .Xr cam 4 , .Xr ctl 4 , .Xr xpt 4 , .Xr camcontrol 8 , .Xr ctld 8 , .Xr ctlstat 8 .Sh HISTORY The .Nm utility was originally written during the Winter/Spring of 2003 as an interface to CTL. .Sh AUTHORS .An Ken Merry Aq Mt ken@FreeBSD.org diff --git a/usr.sbin/ctladm/ctladm.c b/usr.sbin/ctladm/ctladm.c index 6af25ed28925..194f0647fe7f 100644 --- a/usr.sbin/ctladm/ctladm.c +++ b/usr.sbin/ctladm/ctladm.c @@ -1,4294 +1,4290 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2003, 2004 Silicon Graphics International Corp. * Copyright (c) 1997-2007 Kenneth D. Merry * Copyright (c) 2012 The FreeBSD Foundation * Copyright (c) 2018 Marcelo Araujo * All rights reserved. * * Portions of this software were developed by Edward Tomasz Napierala * under sponsorship from the FreeBSD Foundation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/users/kenm/FreeBSD-test2/usr.sbin/ctladm/ctladm.c#4 $ */ /* * CAM Target Layer exercise program. * * Author: Ken Merry */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ctladm.h" #ifdef min #undef min #endif #define min(x,y) (x < y) ? x : y typedef enum { CTLADM_CMD_TUR, CTLADM_CMD_INQUIRY, CTLADM_CMD_REQ_SENSE, CTLADM_CMD_ARRAYLIST, CTLADM_CMD_REPORT_LUNS, CTLADM_CMD_HELP, CTLADM_CMD_DEVLIST, CTLADM_CMD_ADDDEV, CTLADM_CMD_RM, CTLADM_CMD_CREATE, CTLADM_CMD_READ, CTLADM_CMD_WRITE, CTLADM_CMD_PORT, CTLADM_CMD_PORTLIST, CTLADM_CMD_READCAPACITY, CTLADM_CMD_MODESENSE, CTLADM_CMD_DUMPOOA, CTLADM_CMD_DUMPSTRUCTS, CTLADM_CMD_START, CTLADM_CMD_STOP, CTLADM_CMD_SYNC_CACHE, CTLADM_CMD_LUNLIST, CTLADM_CMD_DELAY, CTLADM_CMD_ERR_INJECT, CTLADM_CMD_PRES_IN, CTLADM_CMD_PRES_OUT, CTLADM_CMD_INQ_VPD_DEVID, CTLADM_CMD_RTPG, CTLADM_CMD_MODIFY, CTLADM_CMD_ISLIST, CTLADM_CMD_ISLOGOUT, CTLADM_CMD_ISTERMINATE, CTLADM_CMD_LUNMAP } ctladm_cmdfunction; typedef enum { CTLADM_ARG_NONE = 0x0000000, CTLADM_ARG_AUTOSENSE = 0x0000001, CTLADM_ARG_DEVICE = 0x0000002, CTLADM_ARG_ARRAYSIZE = 0x0000004, CTLADM_ARG_BACKEND = 0x0000008, CTLADM_ARG_CDBSIZE = 0x0000010, CTLADM_ARG_DATALEN = 0x0000020, CTLADM_ARG_FILENAME = 0x0000040, CTLADM_ARG_LBA = 0x0000080, CTLADM_ARG_PC = 0x0000100, CTLADM_ARG_PAGE_CODE = 0x0000200, CTLADM_ARG_PAGE_LIST = 0x0000400, CTLADM_ARG_SUBPAGE = 0x0000800, CTLADM_ARG_PAGELIST = 0x0001000, CTLADM_ARG_DBD = 0x0002000, CTLADM_ARG_TARG_LUN = 0x0004000, CTLADM_ARG_BLOCKSIZE = 0x0008000, CTLADM_ARG_IMMED = 0x0010000, CTLADM_ARG_RELADR = 0x0020000, CTLADM_ARG_RETRIES = 0x0040000, CTLADM_ARG_ONOFFLINE = 0x0080000, CTLADM_ARG_ONESHOT = 0x0100000, CTLADM_ARG_TIMEOUT = 0x0200000, CTLADM_ARG_INITIATOR = 0x0400000, CTLADM_ARG_NOCOPY = 0x0800000, CTLADM_ARG_NEED_TL = 0x1000000 } ctladm_cmdargs; struct ctladm_opts { const char *optname; uint32_t cmdnum; ctladm_cmdargs argnum; const char *subopt; }; typedef enum { CC_OR_NOT_FOUND, CC_OR_AMBIGUOUS, CC_OR_FOUND } ctladm_optret; static const char rw_opts[] = "Nb:c:d:f:l:"; static const char startstop_opts[] = "i"; static struct ctladm_opts option_table[] = { {"adddev", CTLADM_CMD_ADDDEV, CTLADM_ARG_NONE, NULL}, {"create", CTLADM_CMD_CREATE, CTLADM_ARG_NONE, "b:B:d:l:o:s:S:t:"}, {"delay", CTLADM_CMD_DELAY, CTLADM_ARG_NEED_TL, "T:l:t:"}, {"devid", CTLADM_CMD_INQ_VPD_DEVID, CTLADM_ARG_NEED_TL, NULL}, {"devlist", CTLADM_CMD_DEVLIST, CTLADM_ARG_NONE, "b:vx"}, {"dumpooa", CTLADM_CMD_DUMPOOA, CTLADM_ARG_NONE, NULL}, {"dumpstructs", CTLADM_CMD_DUMPSTRUCTS, CTLADM_ARG_NONE, NULL}, {"help", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL}, {"inject", CTLADM_CMD_ERR_INJECT, CTLADM_ARG_NEED_TL, "cd:i:p:r:s:"}, {"inquiry", CTLADM_CMD_INQUIRY, CTLADM_ARG_NEED_TL, NULL}, {"islist", CTLADM_CMD_ISLIST, CTLADM_ARG_NONE, "vx"}, {"islogout", CTLADM_CMD_ISLOGOUT, CTLADM_ARG_NONE, "ac:i:p:"}, {"isterminate", CTLADM_CMD_ISTERMINATE, CTLADM_ARG_NONE, "ac:i:p:"}, {"lunlist", CTLADM_CMD_LUNLIST, CTLADM_ARG_NONE, NULL}, {"lunmap", CTLADM_CMD_LUNMAP, CTLADM_ARG_NONE, "p:l:L:"}, {"modesense", CTLADM_CMD_MODESENSE, CTLADM_ARG_NEED_TL, "P:S:dlm:c:"}, {"modify", CTLADM_CMD_MODIFY, CTLADM_ARG_NONE, "b:l:o:s:"}, {"port", CTLADM_CMD_PORT, CTLADM_ARG_NONE, "lo:O:d:crp:qt:w:W:x"}, {"portlist", CTLADM_CMD_PORTLIST, CTLADM_ARG_NONE, "f:ilp:qvx"}, {"prin", CTLADM_CMD_PRES_IN, CTLADM_ARG_NEED_TL, "a:"}, {"prout", CTLADM_CMD_PRES_OUT, CTLADM_ARG_NEED_TL, "a:k:r:s:"}, {"read", CTLADM_CMD_READ, CTLADM_ARG_NEED_TL, rw_opts}, {"readcapacity", CTLADM_CMD_READCAPACITY, CTLADM_ARG_NEED_TL, "c:"}, {"remove", CTLADM_CMD_RM, CTLADM_ARG_NONE, "b:l:o:"}, {"reportluns", CTLADM_CMD_REPORT_LUNS, CTLADM_ARG_NEED_TL, NULL}, {"reqsense", CTLADM_CMD_REQ_SENSE, CTLADM_ARG_NEED_TL, NULL}, {"rtpg", CTLADM_CMD_RTPG, CTLADM_ARG_NEED_TL, NULL}, {"start", CTLADM_CMD_START, CTLADM_ARG_NEED_TL, startstop_opts}, {"stop", CTLADM_CMD_STOP, CTLADM_ARG_NEED_TL, startstop_opts}, {"synccache", CTLADM_CMD_SYNC_CACHE, CTLADM_ARG_NEED_TL, "b:c:il:r"}, {"tur", CTLADM_CMD_TUR, CTLADM_ARG_NEED_TL, NULL}, {"write", CTLADM_CMD_WRITE, CTLADM_ARG_NEED_TL, rw_opts}, {"-?", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL}, {"-h", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL}, {NULL, 0, 0, NULL} }; ctladm_optret getoption(struct ctladm_opts *table, char *arg, uint32_t *cmdnum, ctladm_cmdargs *argnum, const char **subopt); static int cctl_dump_ooa(int fd, int argc, char **argv); static int cctl_port(int fd, int argc, char **argv, char *combinedopt); static int cctl_do_io(int fd, int retries, union ctl_io *io, const char *func); static int cctl_delay(int fd, int lun, int argc, char **argv, char *combinedopt); static int cctl_lunlist(int fd); static int cctl_sync_cache(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt); static int cctl_start_stop(int fd, int lun, int iid, int retries, int start, int argc, char **argv, char *combinedopt); static int cctl_mode_sense(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt); static int cctl_read_capacity(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt); static int cctl_read_write(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt, ctladm_cmdfunction command); static int cctl_get_luns(int fd, int lun, int iid, int retries, struct scsi_report_luns_data **lun_data, uint32_t *num_luns); static int cctl_report_luns(int fd, int lun, int iid, int retries); static int cctl_tur(int fd, int lun, int iid, int retries); static int cctl_get_inquiry(int fd, int lun, int iid, int retries, char *path_str, int path_len, struct scsi_inquiry_data *inq_data); static int cctl_inquiry(int fd, int lun, int iid, int retries); static int cctl_req_sense(int fd, int lun, int iid, int retries); static int cctl_persistent_reserve_in(int fd, int lun, int initiator, int argc, char **argv, char *combinedopt, int retry_count); static int cctl_persistent_reserve_out(int fd, int lun, int initiator, int argc, char **argv, char *combinedopt, int retry_count); static int cctl_create_lun(int fd, int argc, char **argv, char *combinedopt); static int cctl_inquiry_vpd_devid(int fd, int lun, int initiator); static int cctl_report_target_port_group(int fd, int lun, int initiator); static int cctl_modify_lun(int fd, int argc, char **argv, char *combinedopt); static int cctl_portlist(int fd, int argc, char **argv, char *combinedopt); ctladm_optret getoption(struct ctladm_opts *table, char *arg, uint32_t *cmdnum, ctladm_cmdargs *argnum, const char **subopt) { struct ctladm_opts *opts; int num_matches = 0; for (opts = table; (opts != NULL) && (opts->optname != NULL); opts++) { if (strncmp(opts->optname, arg, strlen(arg)) == 0) { *cmdnum = opts->cmdnum; *argnum = opts->argnum; *subopt = opts->subopt; if (strcmp(opts->optname, arg) == 0) return (CC_OR_FOUND); if (++num_matches > 1) return(CC_OR_AMBIGUOUS); } } if (num_matches > 0) return(CC_OR_FOUND); else return(CC_OR_NOT_FOUND); } static int cctl_dump_ooa(int fd, int argc, char **argv) { struct ctl_ooa ooa; long double cmd_latency; int num_entries, len, lun = -1, retval = 0; unsigned int i; num_entries = 104; if ((argc > 2) && (isdigit(argv[2][0]))) lun = strtol(argv[2], NULL, 0); retry: len = num_entries * sizeof(struct ctl_ooa_entry); bzero(&ooa, sizeof(ooa)); ooa.entries = malloc(len); if (ooa.entries == NULL) { warn("%s: error mallocing %d bytes", __func__, len); return (1); } if (lun >= 0) { ooa.lun_num = lun; } else ooa.flags |= CTL_OOA_FLAG_ALL_LUNS; ooa.alloc_len = len; ooa.alloc_num = num_entries; if (ioctl(fd, CTL_GET_OOA, &ooa) == -1) { warn("%s: CTL_GET_OOA ioctl failed", __func__); retval = 1; goto bailout; } if (ooa.status == CTL_OOA_NEED_MORE_SPACE) { num_entries = num_entries * 2; free(ooa.entries); ooa.entries = NULL; goto retry; } if (ooa.status != CTL_OOA_OK) { warnx("%s: CTL_GET_OOA ioctl returned error %d", __func__, ooa.status); retval = 1; goto bailout; } fprintf(stdout, "Dumping OOA queues\n"); for (i = 0; i < ooa.fill_num; i++) { struct ctl_ooa_entry *entry; char cdb_str[(SCSI_MAX_CDBLEN * 3) +1]; struct bintime delta_bt; struct timespec ts; entry = &ooa.entries[i]; delta_bt = ooa.cur_bt; bintime_sub(&delta_bt, &entry->start_bt); bintime2timespec(&delta_bt, &ts); cmd_latency = ts.tv_sec * 1000; if (ts.tv_nsec > 0) cmd_latency += ts.tv_nsec / 1000000; fprintf(stdout, "LUN %jd tag 0x%04x%s%s%s%s%s%s%s: %s. CDB: %s " "(%0.0Lf ms)\n", (intmax_t)entry->lun_num, entry->tag_num, (entry->cmd_flags & CTL_OOACMD_FLAG_BLOCKED) ? " BLOCKED" : "", (entry->cmd_flags & CTL_OOACMD_FLAG_RTR) ? " RTR" :"", (entry->cmd_flags & CTL_OOACMD_FLAG_DMA_QUEUED) ? " DMAQUEUED" : "", (entry->cmd_flags & CTL_OOACMD_FLAG_DMA) ? " DMA" : "", (entry->cmd_flags & CTL_OOACMD_FLAG_STATUS_QUEUED) ? " STATUSQUEUED" : "", (entry->cmd_flags & CTL_OOACMD_FLAG_STATUS_SENT) ? " STATUS" : "", (entry->cmd_flags & CTL_OOACMD_FLAG_ABORT) ? " ABORT" : "", scsi_op_desc(entry->cdb[0], NULL), scsi_cdb_string(entry->cdb, cdb_str, sizeof(cdb_str)), cmd_latency); } fprintf(stdout, "OOA queues dump done\n"); bailout: free(ooa.entries); return (retval); } static int cctl_dump_structs(int fd, ctladm_cmdargs cmdargs __unused) { if (ioctl(fd, CTL_DUMP_STRUCTS) == -1) { warn(__func__); return (1); } return (0); } typedef enum { CCTL_PORT_MODE_NONE, CCTL_PORT_MODE_LIST, CCTL_PORT_MODE_SET, CCTL_PORT_MODE_ON, CCTL_PORT_MODE_OFF, CCTL_PORT_MODE_CREATE, CCTL_PORT_MODE_REMOVE } cctl_port_mode; static struct ctladm_opts cctl_fe_table[] = { {"fc", CTL_PORT_FC, CTLADM_ARG_NONE, NULL}, {"scsi", CTL_PORT_SCSI, CTLADM_ARG_NONE, NULL}, {"internal", CTL_PORT_INTERNAL, CTLADM_ARG_NONE, NULL}, {"iscsi", CTL_PORT_ISCSI, CTLADM_ARG_NONE, NULL}, {"sas", CTL_PORT_SAS, CTLADM_ARG_NONE, NULL}, {"all", CTL_PORT_ALL, CTLADM_ARG_NONE, NULL}, {NULL, 0, 0, NULL} }; static int cctl_port(int fd, int argc, char **argv, char *combinedopt) { char result_buf[1024]; int c; uint64_t created_port = -1; int32_t targ_port = -1; int retval = 0; int wwnn_set = 0, wwpn_set = 0; uint64_t wwnn = 0, wwpn = 0; cctl_port_mode port_mode = CCTL_PORT_MODE_NONE; struct ctl_port_entry entry; struct ctl_req req; char *driver = NULL; nvlist_t *option_list; ctl_port_type port_type = CTL_PORT_NONE; int quiet = 0, xml = 0; option_list = nvlist_create(0); if (option_list == NULL) err(1, "%s: unable to allocate nvlist", __func__); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'l': if (port_mode != CCTL_PORT_MODE_NONE) goto bailout_badarg; port_mode = CCTL_PORT_MODE_LIST; break; case 'c': port_mode = CCTL_PORT_MODE_CREATE; break; case 'r': port_mode = CCTL_PORT_MODE_REMOVE; break; case 'o': if (port_mode != CCTL_PORT_MODE_NONE) goto bailout_badarg; if (strcasecmp(optarg, "on") == 0) port_mode = CCTL_PORT_MODE_ON; else if (strcasecmp(optarg, "off") == 0) port_mode = CCTL_PORT_MODE_OFF; else { warnx("Invalid -o argument %s, \"on\" or " "\"off\" are the only valid args", optarg); retval = 1; goto bailout; } break; case 'O': { char *tmpstr; char *name, *value; tmpstr = strdup(optarg); name = strsep(&tmpstr, "="); if (name == NULL) { warnx("%s: option -O takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } value = strsep(&tmpstr, "="); if (value == NULL) { warnx("%s: option -O takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } free(tmpstr); nvlist_add_string(option_list, name, value); break; } case 'd': if (driver != NULL) { warnx("%s: option -d cannot be specified twice", __func__); retval = 1; goto bailout; } driver = strdup(optarg); break; case 'p': targ_port = strtol(optarg, NULL, 0); break; case 'q': quiet = 1; break; case 't': { ctladm_optret optret; ctladm_cmdargs argnum; const char *subopt; ctl_port_type tmp_port_type; optret = getoption(cctl_fe_table, optarg, &tmp_port_type, &argnum, &subopt); if (optret == CC_OR_AMBIGUOUS) { warnx("%s: ambiguous frontend type %s", __func__, optarg); retval = 1; goto bailout; } else if (optret == CC_OR_NOT_FOUND) { warnx("%s: invalid frontend type %s", __func__, optarg); retval = 1; goto bailout; } port_type |= tmp_port_type; break; } case 'w': if ((port_mode != CCTL_PORT_MODE_NONE) && (port_mode != CCTL_PORT_MODE_SET)) goto bailout_badarg; port_mode = CCTL_PORT_MODE_SET; wwnn = strtoull(optarg, NULL, 0); wwnn_set = 1; break; case 'W': if ((port_mode != CCTL_PORT_MODE_NONE) && (port_mode != CCTL_PORT_MODE_SET)) goto bailout_badarg; port_mode = CCTL_PORT_MODE_SET; wwpn = strtoull(optarg, NULL, 0); wwpn_set = 1; break; case 'x': xml = 1; break; } } if (driver == NULL) driver = strdup("ioctl"); /* * The user can specify either one or more frontend types (-t), or * a specific frontend, but not both. * * If the user didn't specify a frontend type or number, set it to * all. This is primarily needed for the enable/disable ioctls. * This will be a no-op for the listing code. For the set ioctl, * we'll throw an error, since that only works on one port at a time. */ if ((port_type != CTL_PORT_NONE) && (targ_port != -1)) { warnx("%s: can only specify one of -t or -p", __func__); retval = 1; goto bailout; } else if ((targ_port == -1) && (port_type == CTL_PORT_NONE)) port_type = CTL_PORT_ALL; bzero(&entry, sizeof(entry)); /* * These are needed for all but list/dump mode. */ entry.port_type = port_type; entry.targ_port = targ_port; switch (port_mode) { case CCTL_PORT_MODE_LIST: { char opts[] = "xq"; char argx[] = "-x"; char argq[] = "-q"; char *argvx[2]; int argcx = 0; optind = 0; optreset = 1; if (xml) argvx[argcx++] = argx; if (quiet) argvx[argcx++] = argq; cctl_portlist(fd, argcx, argvx, opts); break; } case CCTL_PORT_MODE_REMOVE: - if (targ_port == -1) { - warnx("%s: -r requires -p", __func__); - retval = 1; - goto bailout; - } /* FALLTHROUGH */ case CCTL_PORT_MODE_CREATE: { bzero(&req, sizeof(req)); strlcpy(req.driver, driver, sizeof(req.driver)); req.result = result_buf; req.result_len = sizeof(result_buf); if (port_mode == CCTL_PORT_MODE_REMOVE) { req.reqtype = CTL_REQ_REMOVE; - nvlist_add_stringf(option_list, "port_id", "%d", - targ_port); + if (targ_port != -1) + nvlist_add_stringf(option_list, "port_id", "%d", + targ_port); } else req.reqtype = CTL_REQ_CREATE; req.args = nvlist_pack(option_list, &req.args_len); if (req.args == NULL) { warn("%s: error packing nvlist", __func__); retval = 1; goto bailout; } retval = ioctl(fd, CTL_PORT_REQ, &req); free(req.args); if (retval == -1) { warn("%s: CTL_PORT_REQ ioctl failed", __func__); retval = 1; goto bailout; } switch (req.status) { case CTL_LUN_ERROR: warnx("error: %s", req.error_str); retval = 1; goto bailout; case CTL_LUN_WARNING: warnx("warning: %s", req.error_str); break; case CTL_LUN_OK: if (port_mode == CCTL_PORT_MODE_CREATE) { req.result_nvl = nvlist_unpack(result_buf, req.result_len, 0); if (req.result_nvl == NULL) { warnx("error unpacking result nvlist"); break; } created_port = nvlist_get_number(req.result_nvl, "port_id"); printf("Port created successfully\n" "frontend: %s\n" "port: %ju\n", driver, (uintmax_t) created_port); nvlist_destroy(req.result_nvl); } else printf("Port destroyed successfully\n"); break; default: warnx("unknown status: %d", req.status); retval = 1; goto bailout; } break; } case CCTL_PORT_MODE_SET: if (targ_port == -1) { warnx("%s: -w and -W require -p", __func__); retval = 1; goto bailout; } if (wwnn_set) { entry.flags |= CTL_PORT_WWNN_VALID; entry.wwnn = wwnn; } if (wwpn_set) { entry.flags |= CTL_PORT_WWPN_VALID; entry.wwpn = wwpn; } if (ioctl(fd, CTL_SET_PORT_WWNS, &entry) == -1) { warn("%s: CTL_SET_PORT_WWNS ioctl failed", __func__); retval = 1; goto bailout; } break; case CCTL_PORT_MODE_ON: if (ioctl(fd, CTL_ENABLE_PORT, &entry) == -1) { warn("%s: CTL_ENABLE_PORT ioctl failed", __func__); retval = 1; goto bailout; } fprintf(stdout, "Front End Ports enabled\n"); break; case CCTL_PORT_MODE_OFF: if (ioctl(fd, CTL_DISABLE_PORT, &entry) == -1) { warn("%s: CTL_DISABLE_PORT ioctl failed", __func__); retval = 1; goto bailout; } fprintf(stdout, "Front End Ports disabled\n"); break; default: warnx("%s: one of -l, -o or -w/-W must be specified", __func__); retval = 1; goto bailout; break; } bailout: nvlist_destroy(option_list); free(driver); return (retval); bailout_badarg: warnx("%s: only one of -c, -r, -l, -o or -w/-W may be specified", __func__); return (1); } static int cctl_do_io(int fd, int retries, union ctl_io *io, const char *func) { do { if (ioctl(fd, CTL_IO, io) == -1) { warn("%s: error sending CTL_IO ioctl", func); return (-1); } } while (((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS) && (retries-- > 0)); return (0); } static int cctl_delay(int fd, int lun, int argc, char **argv, char *combinedopt) { struct ctl_io_delay_info delay_info; char *delayloc = NULL; char *delaytype = NULL; int delaytime = -1; int retval; int c; retval = 0; memset(&delay_info, 0, sizeof(delay_info)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'T': delaytype = strdup(optarg); break; case 'l': delayloc = strdup(optarg); break; case 't': delaytime = strtoul(optarg, NULL, 0); break; } } if (delaytime == -1) { warnx("%s: you must specify the delaytime with -t", __func__); retval = 1; goto bailout; } if (strcasecmp(delayloc, "datamove") == 0) delay_info.delay_loc = CTL_DELAY_LOC_DATAMOVE; else if (strcasecmp(delayloc, "done") == 0) delay_info.delay_loc = CTL_DELAY_LOC_DONE; else { warnx("%s: invalid delay location %s", __func__, delayloc); retval = 1; goto bailout; } if ((delaytype == NULL) || (strcmp(delaytype, "oneshot") == 0)) delay_info.delay_type = CTL_DELAY_TYPE_ONESHOT; else if (strcmp(delaytype, "cont") == 0) delay_info.delay_type = CTL_DELAY_TYPE_CONT; else { warnx("%s: invalid delay type %s", __func__, delaytype); retval = 1; goto bailout; } delay_info.lun_id = lun; delay_info.delay_secs = delaytime; if (ioctl(fd, CTL_DELAY_IO, &delay_info) == -1) { warn("%s: CTL_DELAY_IO ioctl failed", __func__); retval = 1; goto bailout; } switch (delay_info.status) { case CTL_DELAY_STATUS_NONE: warnx("%s: no delay status??", __func__); retval = 1; break; case CTL_DELAY_STATUS_OK: break; case CTL_DELAY_STATUS_INVALID_LUN: warnx("%s: invalid lun %d", __func__, lun); retval = 1; break; case CTL_DELAY_STATUS_INVALID_TYPE: warnx("%s: invalid delay type %d", __func__, delay_info.delay_type); retval = 1; break; case CTL_DELAY_STATUS_INVALID_LOC: warnx("%s: delay location %s not implemented?", __func__, delayloc); retval = 1; break; case CTL_DELAY_STATUS_NOT_IMPLEMENTED: warnx("%s: delay not implemented in the kernel", __func__); warnx("%s: recompile with the CTL_IO_DELAY flag set", __func__); retval = 1; break; default: warnx("%s: unknown delay return status %d", __func__, delay_info.status); retval = 1; break; } bailout: free(delayloc); free(delaytype); return (retval); } static struct ctladm_opts cctl_err_types[] = { {"aborted", CTL_LUN_INJ_ABORTED, CTLADM_ARG_NONE, NULL}, {"mediumerr", CTL_LUN_INJ_MEDIUM_ERR, CTLADM_ARG_NONE, NULL}, {"ua", CTL_LUN_INJ_UA, CTLADM_ARG_NONE, NULL}, {"custom", CTL_LUN_INJ_CUSTOM, CTLADM_ARG_NONE, NULL}, {NULL, 0, 0, NULL} }; static struct ctladm_opts cctl_err_patterns[] = { {"read", CTL_LUN_PAT_READ, CTLADM_ARG_NONE, NULL}, {"write", CTL_LUN_PAT_WRITE, CTLADM_ARG_NONE, NULL}, {"rw", CTL_LUN_PAT_READWRITE, CTLADM_ARG_NONE, NULL}, {"readwrite", CTL_LUN_PAT_READWRITE, CTLADM_ARG_NONE, NULL}, {"readcap", CTL_LUN_PAT_READCAP, CTLADM_ARG_NONE, NULL}, {"tur", CTL_LUN_PAT_TUR, CTLADM_ARG_NONE, NULL}, {"any", CTL_LUN_PAT_ANY, CTLADM_ARG_NONE, NULL}, #if 0 {"cmd", CTL_LUN_PAT_CMD, CTLADM_ARG_NONE, NULL}, #endif {NULL, 0, 0, NULL} }; static int cctl_error_inject(int fd, uint32_t lun, int argc, char **argv, char *combinedopt) { int retval = 0; struct ctl_error_desc err_desc; uint64_t lba = 0; uint32_t len = 0; uint64_t delete_id = 0; int delete_id_set = 0; int continuous = 0; int sense_len = 0; int fd_sense = 0; int c; bzero(&err_desc, sizeof(err_desc)); err_desc.lun_id = lun; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'c': continuous = 1; break; case 'd': delete_id = strtoull(optarg, NULL, 0); delete_id_set = 1; break; case 'i': case 'p': { ctladm_optret optret; ctladm_cmdargs argnum; const char *subopt; if (c == 'i') { ctl_lun_error err_type; if (err_desc.lun_error != CTL_LUN_INJ_NONE) { warnx("%s: can't specify multiple -i " "arguments", __func__); retval = 1; goto bailout; } optret = getoption(cctl_err_types, optarg, &err_type, &argnum, &subopt); err_desc.lun_error = err_type; } else { ctl_lun_error_pattern pattern; optret = getoption(cctl_err_patterns, optarg, &pattern, &argnum, &subopt); err_desc.error_pattern |= pattern; } if (optret == CC_OR_AMBIGUOUS) { warnx("%s: ambiguous argument %s", __func__, optarg); retval = 1; goto bailout; } else if (optret == CC_OR_NOT_FOUND) { warnx("%s: argument %s not found", __func__, optarg); retval = 1; goto bailout; } break; } case 'r': { char *tmpstr, *tmpstr2; tmpstr = strdup(optarg); if (tmpstr == NULL) { warn("%s: error duplicating string %s", __func__, optarg); retval = 1; goto bailout; } tmpstr2 = strsep(&tmpstr, ","); if (tmpstr2 == NULL) { warnx("%s: invalid -r argument %s", __func__, optarg); retval = 1; free(tmpstr); goto bailout; } lba = strtoull(tmpstr2, NULL, 0); tmpstr2 = strsep(&tmpstr, ","); if (tmpstr2 == NULL) { warnx("%s: no len argument for -r lba,len, got" " %s", __func__, optarg); retval = 1; free(tmpstr); goto bailout; } len = strtoul(tmpstr2, NULL, 0); free(tmpstr); break; } case 's': { struct get_hook hook; char *sensestr; sense_len = strtol(optarg, NULL, 0); if (sense_len <= 0) { warnx("invalid number of sense bytes %d", sense_len); retval = 1; goto bailout; } sense_len = MIN(sense_len, SSD_FULL_SIZE); hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; sensestr = cget(&hook, NULL); if ((sensestr != NULL) && (sensestr[0] == '-')) { fd_sense = 1; } else { buff_encode_visit( (uint8_t *)&err_desc.custom_sense, sense_len, sensestr, iget, &hook); } optind += hook.got; break; } default: break; } } if (delete_id_set != 0) { err_desc.serial = delete_id; if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) { warn("%s: error issuing CTL_ERROR_INJECT_DELETE ioctl", __func__); retval = 1; } goto bailout; } if (err_desc.lun_error == CTL_LUN_INJ_NONE) { warnx("%s: error injection command (-i) needed", __func__); retval = 1; goto bailout; } else if ((err_desc.lun_error == CTL_LUN_INJ_CUSTOM) && (sense_len == 0)) { warnx("%s: custom error requires -s", __func__); retval = 1; goto bailout; } if (continuous != 0) err_desc.lun_error |= CTL_LUN_INJ_CONTINUOUS; /* * If fd_sense is set, we need to read the sense data the user * wants returned from stdin. */ if (fd_sense == 1) { ssize_t amt_read; int amt_to_read = sense_len; u_int8_t *buf_ptr = (uint8_t *)&err_desc.custom_sense; for (amt_read = 0; amt_to_read > 0; amt_read = read(STDIN_FILENO, buf_ptr, amt_to_read)) { if (amt_read == -1) { warn("error reading sense data from stdin"); retval = 1; goto bailout; } amt_to_read -= amt_read; buf_ptr += amt_read; } } if (err_desc.error_pattern == CTL_LUN_PAT_NONE) { warnx("%s: command pattern (-p) needed", __func__); retval = 1; goto bailout; } if (len != 0) { err_desc.error_pattern |= CTL_LUN_PAT_RANGE; /* * We could check here to see whether it's a read/write * command, but that will be pointless once we allow * custom patterns. At that point, the user could specify * a READ(6) CDB type, and we wouldn't have an easy way here * to verify whether range checking is possible there. The * user will just figure it out when his error never gets * executed. */ #if 0 if ((err_desc.pattern & CTL_LUN_PAT_READWRITE) == 0) { warnx("%s: need read and/or write pattern if range " "is specified", __func__); retval = 1; goto bailout; } #endif err_desc.lba_range.lba = lba; err_desc.lba_range.len = len; } if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) { warn("%s: error issuing CTL_ERROR_INJECT ioctl", __func__); retval = 1; } else { printf("Error injection succeeded, serial number is %ju\n", (uintmax_t)err_desc.serial); } bailout: return (retval); } static int cctl_lunlist(int fd) { struct scsi_report_luns_data *lun_data; struct scsi_inquiry_data *inq_data; uint32_t num_luns; int initid; unsigned int i; int retval; inq_data = NULL; initid = 7; /* * XXX KDM assuming LUN 0 is fine, but we may need to change this * if we ever acquire the ability to have multiple targets. */ if ((retval = cctl_get_luns(fd, /*lun*/ 0, initid, /*retries*/ 2, &lun_data, &num_luns)) != 0) goto bailout; inq_data = malloc(sizeof(*inq_data)); if (inq_data == NULL) { warn("%s: couldn't allocate memory for inquiry data\n", __func__); retval = 1; goto bailout; } for (i = 0; i < num_luns; i++) { char scsi_path[40]; int lun_val; switch (lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) { case RPL_LUNDATA_ATYP_PERIPH: lun_val = lun_data->luns[i].lundata[1]; break; case RPL_LUNDATA_ATYP_FLAT: lun_val = (lun_data->luns[i].lundata[0] & RPL_LUNDATA_FLAT_LUN_MASK) | (lun_data->luns[i].lundata[1] << RPL_LUNDATA_FLAT_LUN_BITS); break; case RPL_LUNDATA_ATYP_LUN: case RPL_LUNDATA_ATYP_EXTLUN: default: fprintf(stdout, "Unsupported LUN format %d\n", lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK); lun_val = -1; break; } if (lun_val == -1) continue; if ((retval = cctl_get_inquiry(fd, lun_val, initid, /*retries*/ 2, scsi_path, sizeof(scsi_path), inq_data)) != 0) { goto bailout; } printf("%s", scsi_path); scsi_print_inquiry(inq_data); } bailout: if (lun_data != NULL) free(lun_data); if (inq_data != NULL) free(inq_data); return (retval); } static int cctl_sync_cache(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt) { union ctl_io *io; int cdb_size = -1; int retval; uint64_t our_lba = 0; uint32_t our_block_count = 0; int reladr = 0, immed = 0; int c; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warnx("%s: can't allocate memory", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': our_block_count = strtoul(optarg, NULL, 0); break; case 'c': cdb_size = strtol(optarg, NULL, 0); break; case 'i': immed = 1; break; case 'l': our_lba = strtoull(optarg, NULL, 0); break; case 'r': reladr = 1; break; default: break; } } if (cdb_size != -1) { switch (cdb_size) { case 10: case 16: break; default: warnx("%s: invalid cdbsize %d, valid sizes are 10 " "and 16", __func__, cdb_size); retval = 1; goto bailout; break; /* NOTREACHED */ } } else cdb_size = 10; ctl_scsi_sync_cache(/*io*/ io, /*immed*/ immed, /*reladr*/ reladr, /*minimum_cdb_size*/ cdb_size, /*starting_lba*/ our_lba, /*block_count*/ our_block_count, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { fprintf(stdout, "Cache synchronized successfully\n"); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); return (retval); } static int cctl_start_stop(int fd, int lun, int iid, int retries, int start, int argc, char **argv, char *combinedopt) { union ctl_io *io; char scsi_path[40]; int immed = 0; int retval, c; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warnx("%s: can't allocate memory", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'i': immed = 1; break; default: break; } } /* * Use an ordered tag for the stop command, to guarantee that any * pending I/O will finish before the stop command executes. This * would normally be the case anyway, since CTL will basically * treat the start/stop command as an ordered command with respect * to any other command except an INQUIRY. (See ctl_ser_table.c.) */ ctl_scsi_start_stop(/*io*/ io, /*start*/ start, /*load_eject*/ 0, /*immediate*/ immed, /*power_conditions*/ SSS_PC_START_VALID, /*ctl_tag_type*/ start ? CTL_TAG_SIMPLE : CTL_TAG_ORDERED, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } ctl_scsi_path_string(io, scsi_path, sizeof(scsi_path)); if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { fprintf(stdout, "%s LUN %s successfully\n", scsi_path, (start) ? "started" : "stopped"); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); return (retval); } static int cctl_mode_sense(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt) { union ctl_io *io; uint32_t datalen; uint8_t *dataptr; int pc = -1, cdbsize, retval, dbd = 0, subpage = -1; int list = 0; int page_code = -1; int c; cdbsize = 0; retval = 0; dataptr = NULL; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'P': pc = strtoul(optarg, NULL, 0); break; case 'S': subpage = strtoul(optarg, NULL, 0); break; case 'd': dbd = 1; break; case 'l': list = 1; break; case 'm': page_code = strtoul(optarg, NULL, 0); break; case 'c': cdbsize = strtol(optarg, NULL, 0); break; default: break; } } if (((list == 0) && (page_code == -1)) || ((list != 0) && (page_code != -1))) { warnx("%s: you must specify either a page code (-m) or -l", __func__); retval = 1; goto bailout; } if ((page_code != -1) && ((page_code > SMS_ALL_PAGES_PAGE) || (page_code < 0))) { warnx("%s: page code %d is out of range", __func__, page_code); retval = 1; goto bailout; } if (list == 1) { page_code = SMS_ALL_PAGES_PAGE; if (pc != -1) { warnx("%s: arg -P makes no sense with -l", __func__); retval = 1; goto bailout; } if (subpage != -1) { warnx("%s: arg -S makes no sense with -l", __func__); retval = 1; goto bailout; } } if (pc == -1) pc = SMS_PAGE_CTRL_CURRENT; else { if ((pc > 3) || (pc < 0)) { warnx("%s: page control value %d is out of range: 0-3", __func__, pc); retval = 1; goto bailout; } } if ((subpage != -1) && ((subpage > 255) || (subpage < 0))) { warnx("%s: subpage code %d is out of range: 0-255", __func__, subpage); retval = 1; goto bailout; } if (cdbsize != 0) { switch (cdbsize) { case 6: case 10: break; default: warnx("%s: invalid cdbsize %d, valid sizes are 6 " "and 10", __func__, cdbsize); retval = 1; goto bailout; break; } } else cdbsize = 6; if (subpage == -1) subpage = 0; if (cdbsize == 6) datalen = 255; else datalen = 65535; dataptr = (uint8_t *)malloc(datalen); if (dataptr == NULL) { warn("%s: can't allocate %d bytes", __func__, datalen); retval = 1; goto bailout; } memset(dataptr, 0, datalen); ctl_scsi_mode_sense(io, /*data_ptr*/ dataptr, /*data_len*/ datalen, /*dbd*/ dbd, /*llbaa*/ 0, /*page_code*/ page_code, /*pc*/ pc << 6, /*subpage*/ subpage, /*minimum_cdb_size*/ cdbsize, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { int pages_len, used_len; uint32_t returned_len; uint8_t *ndataptr; if (io->scsiio.cdb[0] == MODE_SENSE_6) { struct scsi_mode_hdr_6 *hdr6; int bdlen; hdr6 = (struct scsi_mode_hdr_6 *)dataptr; returned_len = hdr6->datalen + 1; bdlen = hdr6->block_descr_len; ndataptr = (uint8_t *)((uint8_t *)&hdr6[1] + bdlen); } else { struct scsi_mode_hdr_10 *hdr10; int bdlen; hdr10 = (struct scsi_mode_hdr_10 *)dataptr; returned_len = scsi_2btoul(hdr10->datalen) + 2; bdlen = scsi_2btoul(hdr10->block_descr_len); ndataptr = (uint8_t *)((uint8_t *)&hdr10[1] + bdlen); } /* just in case they can give us more than we allocated for */ returned_len = min(returned_len, datalen); pages_len = returned_len - (ndataptr - dataptr); #if 0 fprintf(stdout, "returned_len = %d, pages_len = %d\n", returned_len, pages_len); #endif if (list == 1) { fprintf(stdout, "Supported mode pages:\n"); for (used_len = 0; used_len < pages_len;) { struct scsi_mode_page_header *header; header = (struct scsi_mode_page_header *) &ndataptr[used_len]; fprintf(stdout, "%d\n", header->page_code); used_len += header->page_length + 2; } } else { for (used_len = 0; used_len < pages_len; used_len++) { fprintf(stdout, "0x%x ", ndataptr[used_len]); if (((used_len+1) % 16) == 0) fprintf(stdout, "\n"); } fprintf(stdout, "\n"); } } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_read_capacity(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt) { union ctl_io *io; struct scsi_read_capacity_data *data; struct scsi_read_capacity_data_long *longdata; int cdbsize = -1, retval; uint8_t *dataptr; int c; cdbsize = 10; dataptr = NULL; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory\n", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'c': cdbsize = strtol(optarg, NULL, 0); break; default: break; } } if (cdbsize != -1) { switch (cdbsize) { case 10: case 16: break; default: warnx("%s: invalid cdbsize %d, valid sizes are 10 " "and 16", __func__, cdbsize); retval = 1; goto bailout; break; /* NOTREACHED */ } } else cdbsize = 10; dataptr = (uint8_t *)malloc(sizeof(*longdata)); if (dataptr == NULL) { warn("%s: can't allocate %zd bytes\n", __func__, sizeof(*longdata)); retval = 1; goto bailout; } memset(dataptr, 0, sizeof(*longdata)); retry: switch (cdbsize) { case 10: ctl_scsi_read_capacity(io, /*data_ptr*/ dataptr, /*data_len*/ sizeof(*longdata), /*addr*/ 0, /*reladr*/ 0, /*pmi*/ 0, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); break; case 16: ctl_scsi_read_capacity_16(io, /*data_ptr*/ dataptr, /*data_len*/ sizeof(*longdata), /*addr*/ 0, /*reladr*/ 0, /*pmi*/ 0, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); break; } io->io_hdr.nexus.initid = iid; io->io_hdr.nexus.targ_lun = lun; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { uint64_t maxlba; uint32_t blocksize; if (cdbsize == 10) { data = (struct scsi_read_capacity_data *)dataptr; maxlba = scsi_4btoul(data->addr); blocksize = scsi_4btoul(data->length); if (maxlba == 0xffffffff) { cdbsize = 16; goto retry; } } else { longdata=(struct scsi_read_capacity_data_long *)dataptr; maxlba = scsi_8btou64(longdata->addr); blocksize = scsi_4btoul(longdata->length); } fprintf(stdout, "Disk Capacity: %ju, Blocksize: %d\n", (uintmax_t)maxlba, blocksize); } else { ctl_io_error_print(io, NULL, stderr); } bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_read_write(int fd, int lun, int iid, int retries, int argc, char **argv, char *combinedopt, ctladm_cmdfunction command) { union ctl_io *io; int file_fd, do_stdio; int cdbsize = -1, databytes; uint8_t *dataptr; char *filename = NULL; int datalen = -1, blocksize = -1; uint64_t lba = 0; int lba_set = 0; int retval; int c; retval = 0; do_stdio = 0; dataptr = NULL; file_fd = -1; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory\n", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'N': io->io_hdr.flags |= CTL_FLAG_NO_DATAMOVE; break; case 'b': blocksize = strtoul(optarg, NULL, 0); break; case 'c': cdbsize = strtoul(optarg, NULL, 0); break; case 'd': datalen = strtoul(optarg, NULL, 0); break; case 'f': filename = strdup(optarg); break; case 'l': lba = strtoull(optarg, NULL, 0); lba_set = 1; break; default: break; } } if (filename == NULL) { warnx("%s: you must supply a filename using -f", __func__); retval = 1; goto bailout; } if (datalen == -1) { warnx("%s: you must specify the data length with -d", __func__); retval = 1; goto bailout; } if (lba_set == 0) { warnx("%s: you must specify the LBA with -l", __func__); retval = 1; goto bailout; } if (blocksize == -1) { warnx("%s: you must specify the blocksize with -b", __func__); retval = 1; goto bailout; } if (cdbsize != -1) { switch (cdbsize) { case 6: case 10: case 12: case 16: break; default: warnx("%s: invalid cdbsize %d, valid sizes are 6, " "10, 12 or 16", __func__, cdbsize); retval = 1; goto bailout; break; /* NOTREACHED */ } } else cdbsize = 6; databytes = datalen * blocksize; dataptr = (uint8_t *)malloc(databytes); if (dataptr == NULL) { warn("%s: can't allocate %d bytes\n", __func__, databytes); retval = 1; goto bailout; } if (strcmp(filename, "-") == 0) { if (command == CTLADM_CMD_READ) file_fd = STDOUT_FILENO; else file_fd = STDIN_FILENO; do_stdio = 1; } else { file_fd = open(filename, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR); if (file_fd == -1) { warn("%s: can't open file %s", __func__, filename); retval = 1; goto bailout; } } memset(dataptr, 0, databytes); if (command == CTLADM_CMD_WRITE) { int bytes_read; bytes_read = read(file_fd, dataptr, databytes); if (bytes_read == -1) { warn("%s: error reading file %s", __func__, filename); retval = 1; goto bailout; } if (bytes_read != databytes) { warnx("%s: only read %d bytes from file %s", __func__, bytes_read, filename); retval = 1; goto bailout; } } ctl_scsi_read_write(io, /*data_ptr*/ dataptr, /*data_len*/ databytes, /*read_op*/ (command == CTLADM_CMD_READ) ? 1 : 0, /*byte2*/ 0, /*minimum_cdb_size*/ cdbsize, /*lba*/ lba, /*num_blocks*/ datalen, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if (((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) && (command == CTLADM_CMD_READ)) { int bytes_written; bytes_written = write(file_fd, dataptr, databytes); if (bytes_written == -1) { warn("%s: can't write to %s", __func__, filename); goto bailout; } } else if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS) ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); if ((do_stdio == 0) && (file_fd != -1)) close(file_fd); return (retval); } static int cctl_get_luns(int fd, int lun, int iid, int retries, struct scsi_report_luns_data **lun_data, uint32_t *num_luns) { union ctl_io *io; uint32_t nluns; int lun_datalen; int retval; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warnx("%s: can't allocate memory", __func__); return (1); } /* * lun_data includes space for 1 lun, allocate space for 4 initially. * If that isn't enough, we'll allocate more. */ nluns = 4; retry: lun_datalen = sizeof(*lun_data) + (nluns * sizeof(struct scsi_report_luns_lundata)); *lun_data = malloc(lun_datalen); if (*lun_data == NULL) { warnx("%s: can't allocate memory", __func__); ctl_scsi_free_io(io); return (1); } ctl_scsi_report_luns(io, /*data_ptr*/ (uint8_t *)*lun_data, /*data_len*/ lun_datalen, /*select_report*/ RPL_REPORT_ALL, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.initid = iid; io->io_hdr.nexus.targ_lun = lun; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { uint32_t returned_len, returned_luns; returned_len = scsi_4btoul((*lun_data)->length); returned_luns = returned_len / 8; if (returned_luns > nluns) { nluns = returned_luns; free(*lun_data); goto retry; } /* These should be the same */ *num_luns = MIN(returned_luns, nluns); } else { ctl_io_error_print(io, NULL, stderr); retval = 1; } bailout: ctl_scsi_free_io(io); return (retval); } static int cctl_report_luns(int fd, int lun, int iid, int retries) { struct scsi_report_luns_data *lun_data; uint32_t num_luns, i; int retval; lun_data = NULL; if ((retval = cctl_get_luns(fd, lun, iid, retries, &lun_data, &num_luns)) != 0) goto bailout; fprintf(stdout, "%u LUNs returned\n", num_luns); for (i = 0; i < num_luns; i++) { int lun_val; /* * XXX KDM figure out a way to share this code with * cctl_lunlist()? */ switch (lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) { case RPL_LUNDATA_ATYP_PERIPH: lun_val = lun_data->luns[i].lundata[1]; break; case RPL_LUNDATA_ATYP_FLAT: lun_val = (lun_data->luns[i].lundata[0] & RPL_LUNDATA_FLAT_LUN_MASK) | (lun_data->luns[i].lundata[1] << RPL_LUNDATA_FLAT_LUN_BITS); break; case RPL_LUNDATA_ATYP_LUN: case RPL_LUNDATA_ATYP_EXTLUN: default: fprintf(stdout, "Unsupported LUN format %d\n", lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK); lun_val = -1; break; } if (lun_val == -1) continue; fprintf(stdout, "%d\n", lun_val); } bailout: if (lun_data != NULL) free(lun_data); return (retval); } static int cctl_tur(int fd, int lun, int iid, int retries) { union ctl_io *io; io = ctl_scsi_alloc_io(iid); if (io == NULL) { fprintf(stderr, "can't allocate memory\n"); return (1); } ctl_scsi_tur(io, /* tag_type */ CTL_TAG_SIMPLE, /* control */ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { ctl_scsi_free_io(io); return (1); } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) fprintf(stdout, "Unit is ready\n"); else ctl_io_error_print(io, NULL, stderr); return (0); } static int cctl_get_inquiry(int fd, int lun, int iid, int retries, char *path_str, int path_len, struct scsi_inquiry_data *inq_data) { union ctl_io *io; int retval; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warnx("cctl_inquiry: can't allocate memory\n"); return (1); } ctl_scsi_inquiry(/*io*/ io, /*data_ptr*/ (uint8_t *)inq_data, /*data_len*/ sizeof(*inq_data), /*byte2*/ 0, /*page_code*/ 0, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS) { retval = 1; ctl_io_error_print(io, NULL, stderr); } else if (path_str != NULL) ctl_scsi_path_string(io, path_str, path_len); bailout: ctl_scsi_free_io(io); return (retval); } static int cctl_inquiry(int fd, int lun, int iid, int retries) { struct scsi_inquiry_data *inq_data; char scsi_path[40]; int retval; inq_data = malloc(sizeof(*inq_data)); if (inq_data == NULL) { warnx("%s: can't allocate inquiry data", __func__); retval = 1; goto bailout; } if ((retval = cctl_get_inquiry(fd, lun, iid, retries, scsi_path, sizeof(scsi_path), inq_data)) != 0) goto bailout; printf("%s", scsi_path); scsi_print_inquiry(inq_data); bailout: if (inq_data != NULL) free(inq_data); return (retval); } static int cctl_req_sense(int fd, int lun, int iid, int retries) { union ctl_io *io; struct scsi_sense_data *sense_data; int retval; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warnx("cctl_req_sense: can't allocate memory\n"); return (1); } sense_data = malloc(sizeof(*sense_data)); memset(sense_data, 0, sizeof(*sense_data)); ctl_scsi_request_sense(/*io*/ io, /*data_ptr*/ (uint8_t *)sense_data, /*data_len*/ sizeof(*sense_data), /*byte2*/ 0, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retries, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { bcopy(sense_data, &io->scsiio.sense_data, sizeof(*sense_data)); io->scsiio.sense_len = sizeof(*sense_data); ctl_scsi_sense_print(&io->scsiio, NULL, stdout); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); free(sense_data); return (retval); } static int cctl_report_target_port_group(int fd, int lun, int iid) { union ctl_io *io; uint32_t datalen; uint8_t *dataptr; int retval; dataptr = NULL; retval = 0; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory", __func__); return (1); } datalen = 64; dataptr = (uint8_t *)malloc(datalen); if (dataptr == NULL) { warn("%s: can't allocate %d bytes", __func__, datalen); retval = 1; goto bailout; } memset(dataptr, 0, datalen); ctl_scsi_maintenance_in(/*io*/ io, /*data_ptr*/ dataptr, /*data_len*/ datalen, /*action*/ SA_RPRT_TRGT_GRP, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, 0, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { int returned_len, used_len; returned_len = scsi_4btoul(&dataptr[0]) + 4; for (used_len = 0; used_len < returned_len; used_len++) { fprintf(stdout, "0x%02x ", dataptr[used_len]); if (((used_len+1) % 8) == 0) fprintf(stdout, "\n"); } fprintf(stdout, "\n"); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_inquiry_vpd_devid(int fd, int lun, int iid) { union ctl_io *io; uint32_t datalen; uint8_t *dataptr; int retval; retval = 0; dataptr = NULL; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory", __func__); return (1); } datalen = 256; dataptr = (uint8_t *)malloc(datalen); if (dataptr == NULL) { warn("%s: can't allocate %d bytes", __func__, datalen); retval = 1; goto bailout; } memset(dataptr, 0, datalen); ctl_scsi_inquiry(/*io*/ io, /*data_ptr*/ dataptr, /*data_len*/ datalen, /*byte2*/ SI_EVPD, /*page_code*/ SVPD_DEVICE_ID, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, 0, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { int returned_len, used_len; returned_len = scsi_2btoul(&dataptr[2]) + 4; for (used_len = 0; used_len < returned_len; used_len++) { fprintf(stdout, "0x%02x ", dataptr[used_len]); if (((used_len+1) % 8) == 0) fprintf(stdout, "\n"); } fprintf(stdout, "\n"); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_persistent_reserve_in(int fd, int lun, int iid, int argc, char **argv, char *combinedopt, int retry_count) { union ctl_io *io; uint32_t datalen; uint8_t *dataptr; int action = -1; int retval; int c; retval = 0; dataptr = NULL; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'a': action = strtol(optarg, NULL, 0); break; default: break; } } if (action < 0 || action > 2) { warn("action must be specified and in the range: 0-2"); retval = 1; goto bailout; } datalen = 256; dataptr = (uint8_t *)malloc(datalen); if (dataptr == NULL) { warn("%s: can't allocate %d bytes", __func__, datalen); retval = 1; goto bailout; } memset(dataptr, 0, datalen); ctl_scsi_persistent_res_in(io, /*data_ptr*/ dataptr, /*data_len*/ datalen, /*action*/ action, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retry_count, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { int returned_len, used_len; switch (action) { case 0: returned_len = scsi_4btoul(&dataptr[4]) + 8; returned_len = min(returned_len, 256); break; case 1: returned_len = scsi_4btoul(&dataptr[4]) + 8; break; case 2: returned_len = 8; break; default: warnx("%s: invalid action %d", __func__, action); goto bailout; break; /* NOTREACHED */ } for (used_len = 0; used_len < returned_len; used_len++) { fprintf(stdout, "0x%02x ", dataptr[used_len]); if (((used_len+1) % 8) == 0) fprintf(stdout, "\n"); } fprintf(stdout, "\n"); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_persistent_reserve_out(int fd, int lun, int iid, int argc, char **argv, char *combinedopt, int retry_count) { union ctl_io *io; uint32_t datalen; uint64_t key = 0, sa_key = 0; int action = -1, restype = -1; uint8_t *dataptr; int retval; int c; retval = 0; dataptr = NULL; io = ctl_scsi_alloc_io(iid); if (io == NULL) { warn("%s: can't allocate memory", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'a': action = strtol(optarg, NULL, 0); break; case 'k': key = strtoull(optarg, NULL, 0); break; case 'r': restype = strtol(optarg, NULL, 0); break; case 's': sa_key = strtoull(optarg, NULL, 0); break; default: break; } } if (action < 0 || action > 5) { warn("action must be specified and in the range: 0-5"); retval = 1; goto bailout; } if (restype < 0 || restype > 5) { if (action != 0 && action != 5 && action != 3) { warn("'restype' must specified and in the range: 0-5"); retval = 1; goto bailout; } } datalen = 24; dataptr = (uint8_t *)malloc(datalen); if (dataptr == NULL) { warn("%s: can't allocate %d bytes", __func__, datalen); retval = 1; goto bailout; } memset(dataptr, 0, datalen); ctl_scsi_persistent_res_out(io, /*data_ptr*/ dataptr, /*data_len*/ datalen, /*action*/ action, /*type*/ restype, /*key*/ key, /*sa key*/ sa_key, /*tag_type*/ CTL_TAG_SIMPLE, /*control*/ 0); io->io_hdr.nexus.targ_lun = lun; io->io_hdr.nexus.initid = iid; if (cctl_do_io(fd, retry_count, io, __func__) != 0) { retval = 1; goto bailout; } if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { char scsi_path[40]; ctl_scsi_path_string(io, scsi_path, sizeof(scsi_path)); fprintf( stdout, "%sPERSISTENT RESERVE OUT executed " "successfully\n", scsi_path); } else ctl_io_error_print(io, NULL, stderr); bailout: ctl_scsi_free_io(io); if (dataptr != NULL) free(dataptr); return (retval); } static int cctl_create_lun(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_req req; int device_type = -1; uint64_t lun_size = 0; uint32_t blocksize = 0, req_lun_id = 0; char *serial_num = NULL; char *device_id = NULL; int lun_size_set = 0, blocksize_set = 0, lun_id_set = 0; char *backend_name = NULL; nvlist_t *option_list; int retval = 0, c; option_list = nvlist_create(0); if (option_list == NULL) err(1, "%s: unable to allocate nvlist", __func__); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': backend_name = strdup(optarg); break; case 'B': blocksize = strtoul(optarg, NULL, 0); blocksize_set = 1; break; case 'd': device_id = strdup(optarg); break; case 'l': req_lun_id = strtoul(optarg, NULL, 0); lun_id_set = 1; break; case 'o': { char *tmpstr; char *name, *value; tmpstr = strdup(optarg); name = strsep(&tmpstr, "="); if (name == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } value = strsep(&tmpstr, "="); if (value == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } free(tmpstr); nvlist_add_string(option_list, name, value); break; } case 's': if (strcasecmp(optarg, "auto") != 0) { retval = expand_number(optarg, &lun_size); if (retval != 0) { warn("%s: invalid -s argument", __func__); retval = 1; goto bailout; } } lun_size_set = 1; break; case 'S': serial_num = strdup(optarg); break; case 't': device_type = strtoul(optarg, NULL, 0); break; default: break; } } if (backend_name == NULL) { warnx("%s: backend name (-b) must be specified", __func__); retval = 1; goto bailout; } bzero(&req, sizeof(req)); strlcpy(req.backend, backend_name, sizeof(req.backend)); req.reqtype = CTL_LUNREQ_CREATE; if (blocksize_set != 0) req.reqdata.create.blocksize_bytes = blocksize; if (lun_size_set != 0) req.reqdata.create.lun_size_bytes = lun_size; if (lun_id_set != 0) { req.reqdata.create.flags |= CTL_LUN_FLAG_ID_REQ; req.reqdata.create.req_lun_id = req_lun_id; } req.reqdata.create.flags |= CTL_LUN_FLAG_DEV_TYPE; if (device_type != -1) req.reqdata.create.device_type = device_type; else req.reqdata.create.device_type = T_DIRECT; if (serial_num != NULL) { strlcpy(req.reqdata.create.serial_num, serial_num, sizeof(req.reqdata.create.serial_num)); req.reqdata.create.flags |= CTL_LUN_FLAG_SERIAL_NUM; } if (device_id != NULL) { strlcpy(req.reqdata.create.device_id, device_id, sizeof(req.reqdata.create.device_id)); req.reqdata.create.flags |= CTL_LUN_FLAG_DEVID; } req.args = nvlist_pack(option_list, &req.args_len); if (req.args == NULL) { warn("%s: error packing nvlist", __func__); retval = 1; goto bailout; } retval = ioctl(fd, CTL_LUN_REQ, &req); free(req.args); if (retval == -1) { warn("%s: error issuing CTL_LUN_REQ ioctl", __func__); retval = 1; goto bailout; } switch (req.status) { case CTL_LUN_ERROR: warnx("LUN creation error: %s", req.error_str); retval = 1; goto bailout; case CTL_LUN_WARNING: warnx("LUN creation warning: %s", req.error_str); break; case CTL_LUN_OK: break; default: warnx("unknown LUN creation status: %d", req.status); retval = 1; goto bailout; } fprintf(stdout, "LUN created successfully\n"); fprintf(stdout, "backend: %s\n", req.backend); fprintf(stdout, "device type: %d\n",req.reqdata.create.device_type); fprintf(stdout, "LUN size: %ju bytes\n", (uintmax_t)req.reqdata.create.lun_size_bytes); fprintf(stdout, "blocksize %u bytes\n", req.reqdata.create.blocksize_bytes); fprintf(stdout, "LUN ID: %d\n", req.reqdata.create.req_lun_id); fprintf(stdout, "Serial Number: %s\n", req.reqdata.create.serial_num); fprintf(stdout, "Device ID: %s\n", req.reqdata.create.device_id); bailout: nvlist_destroy(option_list); return (retval); } static int cctl_rm_lun(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_req req; uint32_t lun_id = 0; int lun_id_set = 0; char *backend_name = NULL; nvlist_t *option_list; int retval = 0, c; option_list = nvlist_create(0); if (option_list == NULL) err(1, "%s: unable to allocate nvlist", __func__); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': backend_name = strdup(optarg); break; case 'l': lun_id = strtoul(optarg, NULL, 0); lun_id_set = 1; break; case 'o': { char *tmpstr; char *name, *value; tmpstr = strdup(optarg); name = strsep(&tmpstr, "="); if (name == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } value = strsep(&tmpstr, "="); if (value == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } free(tmpstr); nvlist_add_string(option_list, name, value); break; } default: break; } } if (backend_name == NULL) errx(1, "%s: backend name (-b) must be specified", __func__); if (lun_id_set == 0) errx(1, "%s: LUN id (-l) must be specified", __func__); bzero(&req, sizeof(req)); strlcpy(req.backend, backend_name, sizeof(req.backend)); req.reqtype = CTL_LUNREQ_RM; req.reqdata.rm.lun_id = lun_id; req.args = nvlist_pack(option_list, &req.args_len); if (req.args == NULL) { warn("%s: error packing nvlist", __func__); retval = 1; goto bailout; } retval = ioctl(fd, CTL_LUN_REQ, &req); free(req.args); if (retval == -1) { warn("%s: error issuing CTL_LUN_REQ ioctl", __func__); retval = 1; goto bailout; } switch (req.status) { case CTL_LUN_ERROR: warnx("LUN removal error: %s", req.error_str); retval = 1; goto bailout; case CTL_LUN_WARNING: warnx("LUN removal warning: %s", req.error_str); break; case CTL_LUN_OK: break; default: warnx("unknown LUN removal status: %d", req.status); retval = 1; goto bailout; } printf("LUN %d removed successfully\n", lun_id); bailout: nvlist_destroy(option_list); return (retval); } static int cctl_modify_lun(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_req req; uint64_t lun_size = 0; uint32_t lun_id = 0; int lun_id_set = 0, lun_size_set = 0; char *backend_name = NULL; nvlist_t *option_list; int retval = 0, c; option_list = nvlist_create(0); if (option_list == NULL) err(1, "%s: unable to allocate nvlist", __func__); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': backend_name = strdup(optarg); break; case 'l': lun_id = strtoul(optarg, NULL, 0); lun_id_set = 1; break; case 'o': { char *tmpstr; char *name, *value; tmpstr = strdup(optarg); name = strsep(&tmpstr, "="); if (name == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } value = strsep(&tmpstr, "="); if (value == NULL) { warnx("%s: option -o takes \"name=value\"" "argument", __func__); retval = 1; goto bailout; } free(tmpstr); nvlist_add_string(option_list, name, value); break; } case 's': if (strcasecmp(optarg, "auto") != 0) { retval = expand_number(optarg, &lun_size); if (retval != 0) { warn("%s: invalid -s argument", __func__); retval = 1; goto bailout; } } lun_size_set = 1; break; default: break; } } if (backend_name == NULL) errx(1, "%s: backend name (-b) must be specified", __func__); if (lun_id_set == 0) errx(1, "%s: LUN id (-l) must be specified", __func__); if (lun_size_set == 0 && nvlist_empty(option_list)) errx(1, "%s: size (-s) or options (-o) must be specified", __func__); bzero(&req, sizeof(req)); strlcpy(req.backend, backend_name, sizeof(req.backend)); req.reqtype = CTL_LUNREQ_MODIFY; req.reqdata.modify.lun_id = lun_id; req.reqdata.modify.lun_size_bytes = lun_size; req.args = nvlist_pack(option_list, &req.args_len); if (req.args == NULL) { warn("%s: error packing nvlist", __func__); retval = 1; goto bailout; } retval = ioctl(fd, CTL_LUN_REQ, &req); free(req.args); if (retval == -1) { warn("%s: error issuing CTL_LUN_REQ ioctl", __func__); retval = 1; goto bailout; } switch (req.status) { case CTL_LUN_ERROR: warnx("LUN modification error: %s", req.error_str); retval = 1; goto bailout; case CTL_LUN_WARNING: warnx("LUN modification warning: %s", req.error_str); break; case CTL_LUN_OK: break; default: warnx("unknown LUN modification status: %d", req.status); retval = 1; goto bailout; } printf("LUN %d modified successfully\n", lun_id); bailout: nvlist_destroy(option_list); return (retval); } struct cctl_islist_conn { int connection_id; char *initiator; char *initiator_addr; char *initiator_alias; char *target; char *target_alias; char *header_digest; char *data_digest; char *max_recv_data_segment_length; char *max_send_data_segment_length; char *max_burst_length; char *first_burst_length; char *offload; int immediate_data; int iser; STAILQ_ENTRY(cctl_islist_conn) links; }; struct cctl_islist_data { int num_conns; STAILQ_HEAD(,cctl_islist_conn) conn_list; struct cctl_islist_conn *cur_conn; int level; struct sbuf *cur_sb[32]; }; static void cctl_islist_start_element(void *user_data, const char *name, const char **attr) { int i; struct cctl_islist_data *islist; struct cctl_islist_conn *cur_conn; islist = (struct cctl_islist_data *)user_data; cur_conn = islist->cur_conn; islist->level++; if ((u_int)islist->level >= (sizeof(islist->cur_sb) / sizeof(islist->cur_sb[0]))) errx(1, "%s: too many nesting levels, %zd max", __func__, sizeof(islist->cur_sb) / sizeof(islist->cur_sb[0])); islist->cur_sb[islist->level] = sbuf_new_auto(); if (islist->cur_sb[islist->level] == NULL) err(1, "%s: Unable to allocate sbuf", __func__); if (strcmp(name, "connection") == 0) { if (cur_conn != NULL) errx(1, "%s: improper connection element nesting", __func__); cur_conn = calloc(1, sizeof(*cur_conn)); if (cur_conn == NULL) err(1, "%s: cannot allocate %zd bytes", __func__, sizeof(*cur_conn)); islist->num_conns++; islist->cur_conn = cur_conn; STAILQ_INSERT_TAIL(&islist->conn_list, cur_conn, links); for (i = 0; attr[i] != NULL; i += 2) { if (strcmp(attr[i], "id") == 0) { cur_conn->connection_id = strtoull(attr[i+1], NULL, 0); } else { errx(1, "%s: invalid connection attribute %s = %s", __func__, attr[i], attr[i+1]); } } } } static void cctl_islist_end_element(void *user_data, const char *name) { struct cctl_islist_data *islist; struct cctl_islist_conn *cur_conn; char *str; islist = (struct cctl_islist_data *)user_data; cur_conn = islist->cur_conn; if ((cur_conn == NULL) && (strcmp(name, "ctlislist") != 0)) errx(1, "%s: cur_conn == NULL! (name = %s)", __func__, name); if (islist->cur_sb[islist->level] == NULL) errx(1, "%s: no valid sbuf at level %d (name %s)", __func__, islist->level, name); sbuf_finish(islist->cur_sb[islist->level]); str = strdup(sbuf_data(islist->cur_sb[islist->level])); if (str == NULL) err(1, "%s can't allocate %zd bytes for string", __func__, sbuf_len(islist->cur_sb[islist->level])); sbuf_delete(islist->cur_sb[islist->level]); islist->cur_sb[islist->level] = NULL; islist->level--; if (strcmp(name, "initiator") == 0) { cur_conn->initiator = str; str = NULL; } else if (strcmp(name, "initiator_addr") == 0) { cur_conn->initiator_addr = str; str = NULL; } else if (strcmp(name, "initiator_alias") == 0) { cur_conn->initiator_alias = str; str = NULL; } else if (strcmp(name, "target") == 0) { cur_conn->target = str; str = NULL; } else if (strcmp(name, "target_alias") == 0) { cur_conn->target_alias = str; str = NULL; } else if (strcmp(name, "target_portal_group_tag") == 0) { } else if (strcmp(name, "header_digest") == 0) { cur_conn->header_digest = str; str = NULL; } else if (strcmp(name, "data_digest") == 0) { cur_conn->data_digest = str; str = NULL; } else if (strcmp(name, "max_recv_data_segment_length") == 0) { cur_conn->max_recv_data_segment_length = str; str = NULL; } else if (strcmp(name, "max_send_data_segment_length") == 0) { cur_conn->max_send_data_segment_length = str; str = NULL; } else if (strcmp(name, "max_burst_length") == 0) { cur_conn->max_burst_length = str; str = NULL; } else if (strcmp(name, "first_burst_length") == 0) { cur_conn->first_burst_length = str; str = NULL; } else if (strcmp(name, "offload") == 0) { cur_conn->offload = str; str = NULL; } else if (strcmp(name, "immediate_data") == 0) { cur_conn->immediate_data = atoi(str); } else if (strcmp(name, "iser") == 0) { cur_conn->iser = atoi(str); } else if (strcmp(name, "connection") == 0) { islist->cur_conn = NULL; } else if (strcmp(name, "ctlislist") == 0) { /* Nothing. */ } else { /* * Unknown element; ignore it for forward compatibility. */ } free(str); } static void cctl_islist_char_handler(void *user_data, const XML_Char *str, int len) { struct cctl_islist_data *islist; islist = (struct cctl_islist_data *)user_data; sbuf_bcat(islist->cur_sb[islist->level], str, len); } static int cctl_islist(int fd, int argc, char **argv, char *combinedopt) { struct ctl_iscsi req; struct cctl_islist_data islist; struct cctl_islist_conn *conn; XML_Parser parser; char *conn_str; int conn_len; int dump_xml = 0; int c, retval, verbose = 0; retval = 0; conn_len = 4096; bzero(&islist, sizeof(islist)); STAILQ_INIT(&islist.conn_list); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'v': verbose = 1; break; case 'x': dump_xml = 1; break; default: break; } } retry: conn_str = malloc(conn_len); bzero(&req, sizeof(req)); req.type = CTL_ISCSI_LIST; req.data.list.alloc_len = conn_len; req.data.list.conn_xml = conn_str; if (ioctl(fd, CTL_ISCSI, &req) == -1) { warn("%s: error issuing CTL_ISCSI ioctl", __func__); retval = 1; goto bailout; } if (req.status == CTL_ISCSI_ERROR) { warnx("%s: error returned from CTL_ISCSI ioctl:\n%s", __func__, req.error_str); } else if (req.status == CTL_ISCSI_LIST_NEED_MORE_SPACE) { conn_len = conn_len << 1; goto retry; } if (dump_xml != 0) { printf("%s", conn_str); goto bailout; } parser = XML_ParserCreate(NULL); if (parser == NULL) { warn("%s: Unable to create XML parser", __func__); retval = 1; goto bailout; } XML_SetUserData(parser, &islist); XML_SetElementHandler(parser, cctl_islist_start_element, cctl_islist_end_element); XML_SetCharacterDataHandler(parser, cctl_islist_char_handler); retval = XML_Parse(parser, conn_str, strlen(conn_str), 1); if (retval != 1) { warnx("%s: Unable to parse XML: Error %d", __func__, XML_GetErrorCode(parser)); XML_ParserFree(parser); retval = 1; goto bailout; } retval = 0; XML_ParserFree(parser); if (verbose != 0) { STAILQ_FOREACH(conn, &islist.conn_list, links) { printf("%-25s %d\n", "Session ID:", conn->connection_id); printf("%-25s %s\n", "Initiator name:", conn->initiator); printf("%-25s %s\n", "Initiator portal:", conn->initiator_addr); printf("%-25s %s\n", "Initiator alias:", conn->initiator_alias); printf("%-25s %s\n", "Target name:", conn->target); printf("%-25s %s\n", "Target alias:", conn->target_alias); printf("%-25s %s\n", "Header digest:", conn->header_digest); printf("%-25s %s\n", "Data digest:", conn->data_digest); printf("%-25s %s\n", "MaxRecvDataSegmentLength:", conn->max_recv_data_segment_length); printf("%-25s %s\n", "MaxSendDataSegmentLength:", conn->max_send_data_segment_length); printf("%-25s %s\n", "MaxBurstLen:", conn->max_burst_length); printf("%-25s %s\n", "FirstBurstLen:", conn->first_burst_length); printf("%-25s %s\n", "ImmediateData:", conn->immediate_data ? "Yes" : "No"); printf("%-25s %s\n", "iSER (RDMA):", conn->iser ? "Yes" : "No"); printf("%-25s %s\n", "Offload driver:", conn->offload); printf("\n"); } } else { printf("%4s %-16s %-36s %-36s\n", "ID", "Portal", "Initiator name", "Target name"); STAILQ_FOREACH(conn, &islist.conn_list, links) { printf("%4u %-16s %-36s %-36s\n", conn->connection_id, conn->initiator_addr, conn->initiator, conn->target); } } bailout: free(conn_str); return (retval); } static int cctl_islogout(int fd, int argc, char **argv, char *combinedopt) { struct ctl_iscsi req; int retval = 0, c; int all = 0, connection_id = -1, nargs = 0; char *initiator_name = NULL, *initiator_addr = NULL; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'a': all = 1; nargs++; break; case 'c': connection_id = strtoul(optarg, NULL, 0); nargs++; break; case 'i': initiator_name = strdup(optarg); if (initiator_name == NULL) err(1, "%s: strdup", __func__); nargs++; break; case 'p': initiator_addr = strdup(optarg); if (initiator_addr == NULL) err(1, "%s: strdup", __func__); nargs++; break; default: break; } } if (nargs == 0) errx(1, "%s: either -a, -c, -i, or -p must be specified", __func__); if (nargs > 1) errx(1, "%s: only one of -a, -c, -i, or -p may be specified", __func__); bzero(&req, sizeof(req)); req.type = CTL_ISCSI_LOGOUT; req.data.logout.connection_id = connection_id; if (initiator_addr != NULL) strlcpy(req.data.logout.initiator_addr, initiator_addr, sizeof(req.data.logout.initiator_addr)); if (initiator_name != NULL) strlcpy(req.data.logout.initiator_name, initiator_name, sizeof(req.data.logout.initiator_name)); if (all != 0) req.data.logout.all = 1; if (ioctl(fd, CTL_ISCSI, &req) == -1) { warn("%s: error issuing CTL_ISCSI ioctl", __func__); retval = 1; goto bailout; } if (req.status != CTL_ISCSI_OK) { warnx("%s: error returned from CTL iSCSI logout request:\n%s", __func__, req.error_str); retval = 1; goto bailout; } printf("iSCSI logout requests submitted\n"); bailout: return (retval); } static int cctl_isterminate(int fd, int argc, char **argv, char *combinedopt) { struct ctl_iscsi req; int retval = 0, c; int all = 0, connection_id = -1, nargs = 0; char *initiator_name = NULL, *initiator_addr = NULL; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'a': all = 1; nargs++; break; case 'c': connection_id = strtoul(optarg, NULL, 0); nargs++; break; case 'i': initiator_name = strdup(optarg); if (initiator_name == NULL) err(1, "%s: strdup", __func__); nargs++; break; case 'p': initiator_addr = strdup(optarg); if (initiator_addr == NULL) err(1, "%s: strdup", __func__); nargs++; break; default: break; } } if (nargs == 0) errx(1, "%s: either -a, -c, -i, or -p must be specified", __func__); if (nargs > 1) errx(1, "%s: only one of -a, -c, -i, or -p may be specified", __func__); bzero(&req, sizeof(req)); req.type = CTL_ISCSI_TERMINATE; req.data.terminate.connection_id = connection_id; if (initiator_addr != NULL) strlcpy(req.data.terminate.initiator_addr, initiator_addr, sizeof(req.data.terminate.initiator_addr)); if (initiator_name != NULL) strlcpy(req.data.terminate.initiator_name, initiator_name, sizeof(req.data.terminate.initiator_name)); if (all != 0) req.data.terminate.all = 1; if (ioctl(fd, CTL_ISCSI, &req) == -1) { warn("%s: error issuing CTL_ISCSI ioctl", __func__); retval = 1; goto bailout; } if (req.status != CTL_ISCSI_OK) { warnx("%s: error returned from CTL iSCSI connection " "termination request:\n%s", __func__, req.error_str); retval = 1; goto bailout; } printf("iSCSI connections terminated\n"); bailout: return (retval); } /* * Name/value pair used for per-LUN attributes. */ struct cctl_lun_nv { char *name; char *value; STAILQ_ENTRY(cctl_lun_nv) links; }; /* * Backend LUN information. */ struct cctl_lun { uint64_t lun_id; char *backend_type; uint64_t size_blocks; uint32_t blocksize; char *serial_number; char *device_id; STAILQ_HEAD(,cctl_lun_nv) attr_list; STAILQ_ENTRY(cctl_lun) links; }; struct cctl_devlist_data { int num_luns; STAILQ_HEAD(,cctl_lun) lun_list; struct cctl_lun *cur_lun; int level; struct sbuf *cur_sb[32]; }; static void cctl_start_element(void *user_data, const char *name, const char **attr) { int i; struct cctl_devlist_data *devlist; struct cctl_lun *cur_lun; devlist = (struct cctl_devlist_data *)user_data; cur_lun = devlist->cur_lun; devlist->level++; if ((u_int)devlist->level >= (sizeof(devlist->cur_sb) / sizeof(devlist->cur_sb[0]))) errx(1, "%s: too many nesting levels, %zd max", __func__, sizeof(devlist->cur_sb) / sizeof(devlist->cur_sb[0])); devlist->cur_sb[devlist->level] = sbuf_new_auto(); if (devlist->cur_sb[devlist->level] == NULL) err(1, "%s: Unable to allocate sbuf", __func__); if (strcmp(name, "lun") == 0) { if (cur_lun != NULL) errx(1, "%s: improper lun element nesting", __func__); cur_lun = calloc(1, sizeof(*cur_lun)); if (cur_lun == NULL) err(1, "%s: cannot allocate %zd bytes", __func__, sizeof(*cur_lun)); devlist->num_luns++; devlist->cur_lun = cur_lun; STAILQ_INIT(&cur_lun->attr_list); STAILQ_INSERT_TAIL(&devlist->lun_list, cur_lun, links); for (i = 0; attr[i] != NULL; i += 2) { if (strcmp(attr[i], "id") == 0) { cur_lun->lun_id = strtoull(attr[i+1], NULL, 0); } else { errx(1, "%s: invalid LUN attribute %s = %s", __func__, attr[i], attr[i+1]); } } } } static void cctl_end_element(void *user_data, const char *name) { struct cctl_devlist_data *devlist; struct cctl_lun *cur_lun; char *str; devlist = (struct cctl_devlist_data *)user_data; cur_lun = devlist->cur_lun; if ((cur_lun == NULL) && (strcmp(name, "ctllunlist") != 0)) errx(1, "%s: cur_lun == NULL! (name = %s)", __func__, name); if (devlist->cur_sb[devlist->level] == NULL) errx(1, "%s: no valid sbuf at level %d (name %s)", __func__, devlist->level, name); if (sbuf_finish(devlist->cur_sb[devlist->level]) != 0) err(1, "%s: sbuf_finish", __func__); str = strdup(sbuf_data(devlist->cur_sb[devlist->level])); if (str == NULL) err(1, "%s can't allocate %zd bytes for string", __func__, sbuf_len(devlist->cur_sb[devlist->level])); if (strlen(str) == 0) { free(str); str = NULL; } sbuf_delete(devlist->cur_sb[devlist->level]); devlist->cur_sb[devlist->level] = NULL; devlist->level--; if (strcmp(name, "backend_type") == 0) { cur_lun->backend_type = str; str = NULL; } else if (strcmp(name, "size") == 0) { cur_lun->size_blocks = strtoull(str, NULL, 0); } else if (strcmp(name, "blocksize") == 0) { cur_lun->blocksize = strtoul(str, NULL, 0); } else if (strcmp(name, "serial_number") == 0) { cur_lun->serial_number = str; str = NULL; } else if (strcmp(name, "device_id") == 0) { cur_lun->device_id = str; str = NULL; } else if (strcmp(name, "lun") == 0) { devlist->cur_lun = NULL; } else if (strcmp(name, "ctllunlist") == 0) { /* Nothing. */ } else { struct cctl_lun_nv *nv; nv = calloc(1, sizeof(*nv)); if (nv == NULL) err(1, "%s: can't allocate %zd bytes for nv pair", __func__, sizeof(*nv)); nv->name = strdup(name); if (nv->name == NULL) err(1, "%s: can't allocated %zd bytes for string", __func__, strlen(name)); nv->value = str; str = NULL; STAILQ_INSERT_TAIL(&cur_lun->attr_list, nv, links); } free(str); } static void cctl_char_handler(void *user_data, const XML_Char *str, int len) { struct cctl_devlist_data *devlist; devlist = (struct cctl_devlist_data *)user_data; sbuf_bcat(devlist->cur_sb[devlist->level], str, len); } static int cctl_devlist(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_list list; struct cctl_devlist_data devlist; struct cctl_lun *lun; XML_Parser parser; char *lun_str; int lun_len; int dump_xml = 0; int retval, c; char *backend = NULL; int verbose = 0; retval = 0; lun_len = 4096; bzero(&devlist, sizeof(devlist)); STAILQ_INIT(&devlist.lun_list); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': backend = strdup(optarg); break; case 'v': verbose++; break; case 'x': dump_xml = 1; break; default: break; } } retry: lun_str = malloc(lun_len); bzero(&list, sizeof(list)); list.alloc_len = lun_len; list.status = CTL_LUN_LIST_NONE; list.lun_xml = lun_str; if (ioctl(fd, CTL_LUN_LIST, &list) == -1) { warn("%s: error issuing CTL_LUN_LIST ioctl", __func__); retval = 1; goto bailout; } if (list.status == CTL_LUN_LIST_ERROR) { warnx("%s: error returned from CTL_LUN_LIST ioctl:\n%s", __func__, list.error_str); } else if (list.status == CTL_LUN_LIST_NEED_MORE_SPACE) { lun_len = lun_len << 1; goto retry; } if (dump_xml != 0) { printf("%s", lun_str); goto bailout; } parser = XML_ParserCreate(NULL); if (parser == NULL) { warn("%s: Unable to create XML parser", __func__); retval = 1; goto bailout; } XML_SetUserData(parser, &devlist); XML_SetElementHandler(parser, cctl_start_element, cctl_end_element); XML_SetCharacterDataHandler(parser, cctl_char_handler); retval = XML_Parse(parser, lun_str, strlen(lun_str), 1); if (retval != 1) { warnx("%s: Unable to parse XML: Error %d", __func__, XML_GetErrorCode(parser)); XML_ParserFree(parser); retval = 1; goto bailout; } retval = 0; XML_ParserFree(parser); printf("LUN Backend %18s %4s %-16s %-16s\n", "Size (Blocks)", "BS", "Serial Number", "Device ID"); STAILQ_FOREACH(lun, &devlist.lun_list, links) { struct cctl_lun_nv *nv; if ((backend != NULL) && (strcmp(lun->backend_type, backend) != 0)) continue; printf("%3ju %-8s %18ju %4u %-16s %-16s\n", (uintmax_t)lun->lun_id, lun->backend_type, (uintmax_t)lun->size_blocks, lun->blocksize, lun->serial_number, lun->device_id); if (verbose == 0) continue; STAILQ_FOREACH(nv, &lun->attr_list, links) { printf(" %s=%s\n", nv->name, nv->value); } } bailout: free(lun_str); return (retval); } /* * Port information. */ struct cctl_port { uint64_t port_id; char *online; char *frontend_type; char *name; int pp, vp; char *target, *port, *lun_map; STAILQ_HEAD(,cctl_lun_nv) init_list; STAILQ_HEAD(,cctl_lun_nv) lun_list; STAILQ_HEAD(,cctl_lun_nv) attr_list; STAILQ_ENTRY(cctl_port) links; }; struct cctl_portlist_data { int num_ports; STAILQ_HEAD(,cctl_port) port_list; struct cctl_port *cur_port; int level; uint64_t cur_id; struct sbuf *cur_sb[32]; }; static void cctl_start_pelement(void *user_data, const char *name, const char **attr) { int i; struct cctl_portlist_data *portlist; struct cctl_port *cur_port; portlist = (struct cctl_portlist_data *)user_data; cur_port = portlist->cur_port; portlist->level++; if ((u_int)portlist->level >= (sizeof(portlist->cur_sb) / sizeof(portlist->cur_sb[0]))) errx(1, "%s: too many nesting levels, %zd max", __func__, sizeof(portlist->cur_sb) / sizeof(portlist->cur_sb[0])); portlist->cur_sb[portlist->level] = sbuf_new_auto(); if (portlist->cur_sb[portlist->level] == NULL) err(1, "%s: Unable to allocate sbuf", __func__); portlist->cur_id = 0; for (i = 0; attr[i] != NULL; i += 2) { if (strcmp(attr[i], "id") == 0) { portlist->cur_id = strtoull(attr[i+1], NULL, 0); break; } } if (strcmp(name, "targ_port") == 0) { if (cur_port != NULL) errx(1, "%s: improper port element nesting", __func__); cur_port = calloc(1, sizeof(*cur_port)); if (cur_port == NULL) err(1, "%s: cannot allocate %zd bytes", __func__, sizeof(*cur_port)); portlist->num_ports++; portlist->cur_port = cur_port; STAILQ_INIT(&cur_port->init_list); STAILQ_INIT(&cur_port->lun_list); STAILQ_INIT(&cur_port->attr_list); cur_port->port_id = portlist->cur_id; STAILQ_INSERT_TAIL(&portlist->port_list, cur_port, links); } } static void cctl_end_pelement(void *user_data, const char *name) { struct cctl_portlist_data *portlist; struct cctl_port *cur_port; char *str; portlist = (struct cctl_portlist_data *)user_data; cur_port = portlist->cur_port; if ((cur_port == NULL) && (strcmp(name, "ctlportlist") != 0)) errx(1, "%s: cur_port == NULL! (name = %s)", __func__, name); if (portlist->cur_sb[portlist->level] == NULL) errx(1, "%s: no valid sbuf at level %d (name %s)", __func__, portlist->level, name); if (sbuf_finish(portlist->cur_sb[portlist->level]) != 0) err(1, "%s: sbuf_finish", __func__); str = strdup(sbuf_data(portlist->cur_sb[portlist->level])); if (str == NULL) err(1, "%s can't allocate %zd bytes for string", __func__, sbuf_len(portlist->cur_sb[portlist->level])); if (strlen(str) == 0) { free(str); str = NULL; } sbuf_delete(portlist->cur_sb[portlist->level]); portlist->cur_sb[portlist->level] = NULL; portlist->level--; if (strcmp(name, "frontend_type") == 0) { cur_port->frontend_type = str; str = NULL; } else if (strcmp(name, "port_name") == 0) { cur_port->name = str; str = NULL; } else if (strcmp(name, "online") == 0) { cur_port->online = str; str = NULL; } else if (strcmp(name, "physical_port") == 0) { cur_port->pp = strtoull(str, NULL, 0); } else if (strcmp(name, "virtual_port") == 0) { cur_port->vp = strtoull(str, NULL, 0); } else if (strcmp(name, "target") == 0) { cur_port->target = str; str = NULL; } else if (strcmp(name, "port") == 0) { cur_port->port = str; str = NULL; } else if (strcmp(name, "lun_map") == 0) { cur_port->lun_map = str; str = NULL; } else if (strcmp(name, "targ_port") == 0) { portlist->cur_port = NULL; } else if (strcmp(name, "ctlportlist") == 0) { /* Nothing. */ } else { struct cctl_lun_nv *nv; nv = calloc(1, sizeof(*nv)); if (nv == NULL) err(1, "%s: can't allocate %zd bytes for nv pair", __func__, sizeof(*nv)); if (strcmp(name, "initiator") == 0 || strcmp(name, "lun") == 0) asprintf(&nv->name, "%ju", portlist->cur_id); else nv->name = strdup(name); if (nv->name == NULL) err(1, "%s: can't allocated %zd bytes for string", __func__, strlen(name)); nv->value = str; str = NULL; if (strcmp(name, "initiator") == 0) STAILQ_INSERT_TAIL(&cur_port->init_list, nv, links); else if (strcmp(name, "lun") == 0) STAILQ_INSERT_TAIL(&cur_port->lun_list, nv, links); else STAILQ_INSERT_TAIL(&cur_port->attr_list, nv, links); } free(str); } static void cctl_char_phandler(void *user_data, const XML_Char *str, int len) { struct cctl_portlist_data *portlist; portlist = (struct cctl_portlist_data *)user_data; sbuf_bcat(portlist->cur_sb[portlist->level], str, len); } static int cctl_portlist(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_list list; struct cctl_portlist_data portlist; struct cctl_port *port; XML_Parser parser; char *port_str = NULL; int port_len; int dump_xml = 0; int retval, c; char *frontend = NULL; uint64_t portarg = UINT64_MAX; int verbose = 0, init = 0, lun = 0, quiet = 0; retval = 0; port_len = 4096; bzero(&portlist, sizeof(portlist)); STAILQ_INIT(&portlist.port_list); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'f': frontend = strdup(optarg); break; case 'i': init++; break; case 'l': lun++; break; case 'p': portarg = strtoll(optarg, NULL, 0); break; case 'q': quiet++; break; case 'v': verbose++; break; case 'x': dump_xml = 1; break; default: break; } } retry: port_str = (char *)realloc(port_str, port_len); bzero(&list, sizeof(list)); list.alloc_len = port_len; list.status = CTL_LUN_LIST_NONE; list.lun_xml = port_str; if (ioctl(fd, CTL_PORT_LIST, &list) == -1) { warn("%s: error issuing CTL_PORT_LIST ioctl", __func__); retval = 1; goto bailout; } if (list.status == CTL_LUN_LIST_ERROR) { warnx("%s: error returned from CTL_PORT_LIST ioctl:\n%s", __func__, list.error_str); } else if (list.status == CTL_LUN_LIST_NEED_MORE_SPACE) { port_len = port_len << 1; goto retry; } if (dump_xml != 0) { printf("%s", port_str); goto bailout; } parser = XML_ParserCreate(NULL); if (parser == NULL) { warn("%s: Unable to create XML parser", __func__); retval = 1; goto bailout; } XML_SetUserData(parser, &portlist); XML_SetElementHandler(parser, cctl_start_pelement, cctl_end_pelement); XML_SetCharacterDataHandler(parser, cctl_char_phandler); retval = XML_Parse(parser, port_str, strlen(port_str), 1); if (retval != 1) { warnx("%s: Unable to parse XML: Error %d", __func__, XML_GetErrorCode(parser)); XML_ParserFree(parser); retval = 1; goto bailout; } retval = 0; XML_ParserFree(parser); if (quiet == 0) printf("Port Online Frontend Name pp vp\n"); STAILQ_FOREACH(port, &portlist.port_list, links) { struct cctl_lun_nv *nv; if ((frontend != NULL) && (strcmp(port->frontend_type, frontend) != 0)) continue; if ((portarg != UINT64_MAX) && (portarg != port->port_id)) continue; printf("%-4ju %-6s %-8s %-8s %-2d %-2d %s\n", (uintmax_t)port->port_id, port->online, port->frontend_type, port->name, port->pp, port->vp, port->port ? port->port : ""); if (init || verbose) { if (port->target) printf(" Target: %s\n", port->target); STAILQ_FOREACH(nv, &port->init_list, links) { printf(" Initiator %s: %s\n", nv->name, nv->value); } } if (lun || verbose) { if (port->lun_map) { STAILQ_FOREACH(nv, &port->lun_list, links) printf(" LUN %s: %s\n", nv->name, nv->value); if (STAILQ_EMPTY(&port->lun_list)) printf(" No LUNs mapped\n"); } else printf(" All LUNs mapped\n"); } if (verbose) { STAILQ_FOREACH(nv, &port->attr_list, links) { printf(" %s=%s\n", nv->name, nv->value); } } } bailout: free(port_str); return (retval); } static int cctl_lunmap(int fd, int argc, char **argv, char *combinedopt) { struct ctl_lun_map lm; int retval = 0, c; retval = 0; lm.port = UINT32_MAX; lm.plun = UINT32_MAX; lm.lun = UINT32_MAX; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'p': lm.port = strtoll(optarg, NULL, 0); break; case 'l': lm.plun = strtoll(optarg, NULL, 0); break; case 'L': lm.lun = strtoll(optarg, NULL, 0); break; default: break; } } if (ioctl(fd, CTL_LUN_MAP, &lm) == -1) { warn("%s: error issuing CTL_LUN_MAP ioctl", __func__); retval = 1; } return (retval); } void usage(int error) { fprintf(error ? stderr : stdout, "Usage:\n" "Primary commands:\n" " ctladm tur [dev_id][general options]\n" " ctladm inquiry [dev_id][general options]\n" " ctladm devid [dev_id][general options]\n" " ctladm reqsense [dev_id][general options]\n" " ctladm reportluns [dev_id][general options]\n" " ctladm read [dev_id][general options] <-l lba> <-d len>\n" " <-f file|-> <-b blocksize> [-c cdbsize][-N]\n" " ctladm write [dev_id][general options] <-l lba> <-d len>\n" " <-f file|-> <-b blocksize> [-c cdbsize][-N]\n" " ctladm readcap [dev_id][general options] [-c cdbsize]\n" " ctladm modesense [dev_id][general options] <-m page|-l> [-P pc]\n" " [-d] [-S subpage] [-c cdbsize]\n" " ctladm prin [dev_id][general options] <-a action>\n" " ctladm prout [dev_id][general options] <-a action>\n" " <-r restype] [-k key] [-s sa_key]\n" " ctladm rtpg [dev_id][general options]\n" " ctladm start [dev_id][general options] [-i] [-o]\n" " ctladm stop [dev_id][general options] [-i] [-o]\n" " ctladm synccache [dev_id][general options] [-l lba]\n" " [-b blockcount] [-r] [-i] [-c cdbsize]\n" " ctladm create <-b backend> [-B blocksize] [-d device_id]\n" " [-l lun_id] [-o name=value] [-s size_bytes]\n" " [-S serial_num] [-t dev_type]\n" " ctladm remove <-b backend> <-l lun_id> [-o name=value]\n" " ctladm modify <-b backend> <-l lun_id> <-s size_bytes>\n" " ctladm devlist [-b backend] [-v] [-x]\n" " ctladm lunlist\n" " ctladm lunmap -p targ_port [-l pLUN] [-L cLUN]\n" " ctladm delay [dev_id] <-l datamove|done> [-T oneshot|cont]\n" " [-t secs]\n" " ctladm inject [dev_id] <-i action> <-p pattern> [-r lba,len]\n" " [-s len fmt [args]] [-c] [-d delete_id]\n" " ctladm port <-o | [-w wwnn][-W wwpn]>\n" " [-p targ_port] [-t port_type]\n" " <-c> [-d driver] [-O name=value]\n" " <-r> <-p targ_port>\n" " ctladm portlist [-f frontend] [-i] [-p targ_port] [-q] [-v] [-x]\n" " ctladm islist [-v | -x]\n" " ctladm islogout <-a | -c connection-id | -i name | -p portal>\n" " ctladm isterminate <-a | -c connection-id | -i name | -p portal>\n" " ctladm dumpooa\n" " ctladm dumpstructs\n" " ctladm help\n" "General Options:\n" "-I intiator_id : defaults to 7, used to change the initiator id\n" "-C retries : specify the number of times to retry this command\n" "-D devicename : specify the device to operate on\n" " : (default is %s)\n" "read/write options:\n" "-l lba : logical block address\n" "-d len : read/write length, in blocks\n" "-f file|- : write/read data to/from file or stdout/stdin\n" "-b blocksize : block size, in bytes\n" "-c cdbsize : specify minimum cdb size: 6, 10, 12 or 16\n" "-N : do not copy data to/from userland\n" "readcapacity options:\n" "-c cdbsize : specify minimum cdb size: 10 or 16\n" "modesense options:\n" "-m page : specify the mode page to view\n" "-l : request a list of supported pages\n" "-P pc : specify the page control value: 0-3 (current,\n" " changeable, default, saved, respectively)\n" "-d : disable block descriptors for mode sense\n" "-S subpage : specify a subpage\n" "-c cdbsize : specify minimum cdb size: 6 or 10\n" "persistent reserve in options:\n" "-a action : specify the action value: 0-2 (read key, read\n" " reservation, read capabilities, respectively)\n" "persistent reserve out options:\n" "-a action : specify the action value: 0-5 (register, reserve,\n" " release, clear, preempt, register and ignore)\n" "-k key : key value\n" "-s sa_key : service action value\n" "-r restype : specify the reservation type: 0-5(wr ex, ex ac,\n" " wr ex ro, ex ac ro, wr ex ar, ex ac ar)\n" "start/stop options:\n" "-i : set the immediate bit (CTL does not support this)\n" "-o : set the on/offline bit\n" "synccache options:\n" "-l lba : set the starting LBA\n" "-b blockcount : set the length to sync in blocks\n" "-r : set the relative addressing bit\n" "-i : set the immediate bit\n" "-c cdbsize : specify minimum cdb size: 10 or 16\n" "create options:\n" "-b backend : backend name (\"block\", \"ramdisk\", etc.)\n" "-B blocksize : LUN blocksize in bytes (some backends)\n" "-d device_id : SCSI VPD page 0x83 ID\n" "-l lun_id : requested LUN number\n" "-o name=value : backend-specific options, multiple allowed\n" "-s size_bytes : LUN size in bytes (some backends)\n" "-S serial_num : SCSI VPD page 0x80 serial number\n" "-t dev_type : SCSI device type (0=disk, 3=processor)\n" "remove options:\n" "-b backend : backend name (\"block\", \"ramdisk\", etc.)\n" "-l lun_id : LUN number to delete\n" "-o name=value : backend-specific options, multiple allowed\n" "devlist options:\n" "-b backend : list devices from specified backend only\n" "-v : be verbose, show backend attributes\n" "-x : dump raw XML\n" "delay options:\n" "-l datamove|done : delay command at datamove or done phase\n" "-T oneshot : delay one command, then resume normal completion\n" "-T cont : delay all commands\n" "-t secs : number of seconds to delay\n" "inject options:\n" "-i error_action : action to perform\n" "-p pattern : command pattern to look for\n" "-r lba,len : LBA range for pattern\n" "-s len fmt [args] : sense data for custom sense action\n" "-c : continuous operation\n" "-d delete_id : error id to delete\n" "port options:\n" "-c : create new ioctl or iscsi frontend port\n" "-d : specify ioctl or iscsi frontend type\n" "-l : list frontend ports\n" "-o on|off : turn frontend ports on or off\n" "-O pp|vp : create new frontend port using pp and/or vp\n" "-w wwnn : set WWNN for one frontend\n" "-W wwpn : set WWPN for one frontend\n" "-t port_type : specify fc, scsi, ioctl, internal frontend type\n" "-p targ_port : specify target port number\n" "-r : remove frontend port\n" "-q : omit header in list output\n" "-x : output port list in XML format\n" "portlist options:\n" "-f frontend : specify frontend type\n" "-i : report target and initiators addresses\n" "-l : report LUN mapping\n" "-p targ_port : specify target port number\n" "-q : omit header in list output\n" "-v : verbose output (report all port options)\n" "-x : output port list in XML format\n" "lunmap options:\n" "-p targ_port : specify target port number\n" "-l pLUN : specify port-visible LUN\n" "-L cLUN : specify CTL LUN\n", CTL_DEFAULT_DEV); } int main(int argc, char **argv) { int c; ctladm_cmdfunction command; ctladm_cmdargs cmdargs; ctladm_optret optreturn; char *device; const char *mainopt = "C:D:I:"; const char *subopt = NULL; char combinedopt[256]; int lun; int optstart = 2; int retval, fd; int retries; int initid; int saved_errno; retval = 0; cmdargs = CTLADM_ARG_NONE; command = CTLADM_CMD_HELP; device = NULL; fd = -1; retries = 0; lun = 0; initid = 7; if (argc < 2) { usage(1); retval = 1; goto bailout; } /* * Get the base option. */ optreturn = getoption(option_table,argv[1], &command, &cmdargs,&subopt); if (optreturn == CC_OR_AMBIGUOUS) { warnx("ambiguous option %s", argv[1]); usage(0); exit(1); } else if (optreturn == CC_OR_NOT_FOUND) { warnx("option %s not found", argv[1]); usage(0); exit(1); } if (cmdargs & CTLADM_ARG_NEED_TL) { if ((argc < 3) || (!isdigit(argv[2][0]))) { warnx("option %s requires a lun argument", argv[1]); usage(0); exit(1); } lun = strtol(argv[2], NULL, 0); cmdargs |= CTLADM_ARG_TARG_LUN; optstart++; } /* * Ahh, getopt(3) is a pain. * * This is a gross hack. There really aren't many other good * options (excuse the pun) for parsing options in a situation like * this. getopt is kinda braindead, so you end up having to run * through the options twice, and give each invocation of getopt * the option string for the other invocation. * * You would think that you could just have two groups of options. * The first group would get parsed by the first invocation of * getopt, and the second group would get parsed by the second * invocation of getopt. It doesn't quite work out that way. When * the first invocation of getopt finishes, it leaves optind pointing * to the argument _after_ the first argument in the second group. * So when the second invocation of getopt comes around, it doesn't * recognize the first argument it gets and then bails out. * * A nice alternative would be to have a flag for getopt that says * "just keep parsing arguments even when you encounter an unknown * argument", but there isn't one. So there's no real clean way to * easily parse two sets of arguments without having one invocation * of getopt know about the other. * * Without this hack, the first invocation of getopt would work as * long as the generic arguments are first, but the second invocation * (in the subfunction) would fail in one of two ways. In the case * where you don't set optreset, it would fail because optind may be * pointing to the argument after the one it should be pointing at. * In the case where you do set optreset, and reset optind, it would * fail because getopt would run into the first set of options, which * it doesn't understand. * * All of this would "sort of" work if you could somehow figure out * whether optind had been incremented one option too far. The * mechanics of that, however, are more daunting than just giving * both invocations all of the expect options for either invocation. * * Needless to say, I wouldn't mind if someone invented a better * (non-GPL!) command line parsing interface than getopt. I * wouldn't mind if someone added more knobs to getopt to make it * work better. Who knows, I may talk myself into doing it someday, * if the standards weenies let me. As it is, it just leads to * hackery like this and causes people to avoid it in some cases. * * KDM, September 8th, 1998 */ if (subopt != NULL) sprintf(combinedopt, "%s%s", mainopt, subopt); else sprintf(combinedopt, "%s", mainopt); /* * Start getopt processing at argv[2/3], since we've already * accepted argv[1..2] as the command name, and as a possible * device name. */ optind = optstart; /* * Now we run through the argument list looking for generic * options, and ignoring options that possibly belong to * subfunctions. */ while ((c = getopt(argc, argv, combinedopt))!= -1){ switch (c) { case 'C': cmdargs |= CTLADM_ARG_RETRIES; retries = strtol(optarg, NULL, 0); break; case 'D': device = strdup(optarg); cmdargs |= CTLADM_ARG_DEVICE; break; case 'I': cmdargs |= CTLADM_ARG_INITIATOR; initid = strtol(optarg, NULL, 0); break; default: break; } } if ((cmdargs & CTLADM_ARG_INITIATOR) == 0) initid = 7; optind = optstart; optreset = 1; /* * Default to opening the CTL device for now. */ if (((cmdargs & CTLADM_ARG_DEVICE) == 0) && (command != CTLADM_CMD_HELP)) { device = strdup(CTL_DEFAULT_DEV); cmdargs |= CTLADM_ARG_DEVICE; } if ((cmdargs & CTLADM_ARG_DEVICE) && (command != CTLADM_CMD_HELP)) { fd = open(device, O_RDWR); if (fd == -1 && errno == ENOENT) { saved_errno = errno; retval = kldload("ctl"); if (retval != -1) fd = open(device, O_RDWR); else errno = saved_errno; } if (fd == -1) { fprintf(stderr, "%s: error opening %s: %s\n", argv[0], device, strerror(errno)); retval = 1; goto bailout; } #ifdef WANT_ISCSI else { if (modfind("cfiscsi") == -1 && kldload("cfiscsi") == -1) warn("couldn't load cfiscsi"); } #endif } else if ((command != CTLADM_CMD_HELP) && ((cmdargs & CTLADM_ARG_DEVICE) == 0)) { fprintf(stderr, "%s: you must specify a device with the " "--device argument for this command\n", argv[0]); command = CTLADM_CMD_HELP; retval = 1; } switch (command) { case CTLADM_CMD_TUR: retval = cctl_tur(fd, lun, initid, retries); break; case CTLADM_CMD_INQUIRY: retval = cctl_inquiry(fd, lun, initid, retries); break; case CTLADM_CMD_REQ_SENSE: retval = cctl_req_sense(fd, lun, initid, retries); break; case CTLADM_CMD_REPORT_LUNS: retval = cctl_report_luns(fd, lun, initid, retries); break; case CTLADM_CMD_CREATE: retval = cctl_create_lun(fd, argc, argv, combinedopt); break; case CTLADM_CMD_RM: retval = cctl_rm_lun(fd, argc, argv, combinedopt); break; case CTLADM_CMD_DEVLIST: retval = cctl_devlist(fd, argc, argv, combinedopt); break; case CTLADM_CMD_READ: case CTLADM_CMD_WRITE: retval = cctl_read_write(fd, lun, initid, retries, argc, argv, combinedopt, command); break; case CTLADM_CMD_PORT: retval = cctl_port(fd, argc, argv, combinedopt); break; case CTLADM_CMD_PORTLIST: retval = cctl_portlist(fd, argc, argv, combinedopt); break; case CTLADM_CMD_LUNMAP: retval = cctl_lunmap(fd, argc, argv, combinedopt); break; case CTLADM_CMD_READCAPACITY: retval = cctl_read_capacity(fd, lun, initid, retries, argc, argv, combinedopt); break; case CTLADM_CMD_MODESENSE: retval = cctl_mode_sense(fd, lun, initid, retries, argc, argv, combinedopt); break; case CTLADM_CMD_START: case CTLADM_CMD_STOP: retval = cctl_start_stop(fd, lun, initid, retries, (command == CTLADM_CMD_START) ? 1 : 0, argc, argv, combinedopt); break; case CTLADM_CMD_SYNC_CACHE: retval = cctl_sync_cache(fd, lun, initid, retries, argc, argv, combinedopt); break; case CTLADM_CMD_LUNLIST: retval = cctl_lunlist(fd); break; case CTLADM_CMD_DELAY: retval = cctl_delay(fd, lun, argc, argv, combinedopt); break; case CTLADM_CMD_ERR_INJECT: retval = cctl_error_inject(fd, lun, argc, argv, combinedopt); break; case CTLADM_CMD_DUMPOOA: retval = cctl_dump_ooa(fd, argc, argv); break; case CTLADM_CMD_DUMPSTRUCTS: retval = cctl_dump_structs(fd, cmdargs); break; case CTLADM_CMD_PRES_IN: retval = cctl_persistent_reserve_in(fd, lun, initid, argc, argv, combinedopt, retries); break; case CTLADM_CMD_PRES_OUT: retval = cctl_persistent_reserve_out(fd, lun, initid, argc, argv, combinedopt, retries); break; case CTLADM_CMD_INQ_VPD_DEVID: retval = cctl_inquiry_vpd_devid(fd, lun, initid); break; case CTLADM_CMD_RTPG: retval = cctl_report_target_port_group(fd, lun, initid); break; case CTLADM_CMD_MODIFY: retval = cctl_modify_lun(fd, argc, argv, combinedopt); break; case CTLADM_CMD_ISLIST: retval = cctl_islist(fd, argc, argv, combinedopt); break; case CTLADM_CMD_ISLOGOUT: retval = cctl_islogout(fd, argc, argv, combinedopt); break; case CTLADM_CMD_ISTERMINATE: retval = cctl_isterminate(fd, argc, argv, combinedopt); break; case CTLADM_CMD_HELP: default: usage(retval); break; } bailout: if (fd != -1) close(fd); exit (retval); } /* * vim: ts=8 */ diff --git a/usr.sbin/ctladm/tests/port.sh b/usr.sbin/ctladm/tests/port.sh index 161759ec14d0..633dec2fd273 100644 --- a/usr.sbin/ctladm/tests/port.sh +++ b/usr.sbin/ctladm/tests/port.sh @@ -1,318 +1,336 @@ # SPDX-License-Identifier: BSD-2-Clause # # Copyright (c) 2024 Axcient # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS DOCUMENTATION IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Things that aren't tested due to lack of kernel support: # * Creating camsim ports # * Creating tpc ports # * Creating camtgt ports # * Creating umass ports # TODO # * Creating nvmf ports # * Creating ha ports # * Creating fc ports # The PGTAG can be any 16-bit number. The only constraint is that each # PGTAG,TARGET pair must be globally unique. PGTAG=30257 load_cfiscsi() { if ! kldstat -q -m cfiscsi; then kldload cfiscsi || atf_skip "could not load cfscsi kernel mod" fi } skip_if_ctld() { if service ctld onestatus > /dev/null; then # If ctld is running on this server, let's not interfere. atf_skip "Cannot run this test while ctld is running" fi } cleanup() { driver=$1 if [ -e port-create.txt ]; then case "$driver" in "ioctl") PORTNUM=`awk '/port:/ {print $2}' port-create.txt` ctladm port -r -d $driver -p $PORTNUM ;; "iscsi") TARGET=`awk '/target:/ {print $2}' port-create.txt` - # PORTNUM is ignored, but must be set - PORTNUM=9999 ctladm port -r -d $driver -p "$PORTNUM" -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target=$TARGET ;; esac fi } atf_test_case create_ioctl cleanup create_ioctl_head() { atf_set "descr" "ctladm can create a new ioctl port" atf_set "require.user" "root" } create_ioctl_body() { skip_if_ctld atf_check -o save:port-create.txt ctladm port -c -d "ioctl" atf_check egrep -q "Port created successfully" port-create.txt atf_check egrep -q "frontend: *ioctl" port-create.txt atf_check egrep -q "port: *[0-9]+" port-create.txt portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf ioctl atf_check egrep -q "$portnum *YES *ioctl *ioctl" portlist.txt } create_ioctl_cleanup() { cleanup ioctl } +atf_test_case remove_ioctl_without_required_args cleanup +remove_ioctl_without_required_args_head() +{ + atf_set "descr" "ctladm will gracefully fail to remove an ioctl target if required arguments are missing" + atf_set "require.user" "root" +} +remove_ioctl_without_required_args_body() +{ + skip_if_ctld + + atf_check -o save:port-create.txt ctladm port -c -d "ioctl" + atf_check egrep -q "Port created successfully" port-create.txt + atf_check -s exit:1 -e match:"Missing required argument: port_id" ctladm port -r -d "ioctl" +} +remove_ioctl_without_required_args_cleanup() +{ + cleanup ioctl +} + atf_test_case create_iscsi cleanup create_iscsi_head() { atf_set "descr" "ctladm can create a new iscsi port" atf_set "require.user" "root" } create_iscsi_body() { skip_if_ctld load_cfiscsi TARGET=iqn.2018-10.myhost.create_iscsi atf_check -o save:port-create.txt ctladm port -c -d "iscsi" -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" echo "target: $TARGET" >> port-create.txt atf_check egrep -q "Port created successfully" port-create.txt atf_check egrep -q "frontend: *iscsi" port-create.txt atf_check egrep -q "port: *[0-9]+" port-create.txt atf_check -o save:portlist.txt ctladm portlist -qf iscsi # Unlike the ioctl driver, the iscsi driver creates ports in a disabled # state, so the port's lunmap may be set before enabling it. atf_check egrep -q "$portnum *NO *iscsi *iscsi.*$TARGET" portlist.txt } create_iscsi_cleanup() { cleanup iscsi } atf_test_case create_iscsi_alias cleanup create_iscsi_alias_head() { atf_set "descr" "ctladm can create a new iscsi port with a target alias" atf_set "require.user" "root" } create_iscsi_alias_body() { skip_if_ctld load_cfiscsi TARGET=iqn.2018-10.myhost.create_iscsi_alias ALIAS="foobar" atf_check -o save:port-create.txt ctladm port -c -d "iscsi" -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" -O cfiscsi_target_alias="$ALIAS" echo "target: $TARGET" >> port-create.txt atf_check egrep -q "Port created successfully" port-create.txt atf_check egrep -q "frontend: *iscsi" port-create.txt atf_check egrep -q "port: *[0-9]+" port-create.txt atf_check -o save:portlist.txt ctladm portlist -qvf iscsi atf_check egrep -q "cfiscsi_target_alias=$ALIAS" portlist.txt } create_iscsi_alias_cleanup() { cleanup iscsi } atf_test_case create_iscsi_without_required_args create_iscsi_without_required_args_head() { atf_set "descr" "ctladm will gracefully fail to create an iSCSI target if required arguments are missing" atf_set "require.user" "root" } create_iscsi_without_required_args_body() { skip_if_ctld load_cfiscsi TARGET=iqn.2018-10.myhost.create_iscsi atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_target" ctladm port -c -d "iscsi" -O cfiscsi_portal_group_tag=$PGTAG atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_portal_group_tag" ctladm port -c -d "iscsi" -O cfiscsi_target=$TARGET } atf_test_case create_ioctl_options cleanup create_ioctl_options_head() { atf_set "descr" "ctladm can set options when creating a new ioctl port" atf_set "require.user" "root" } create_ioctl_options_body() { skip_if_ctld atf_check -o save:port-create.txt ctladm port -c -d "ioctl" -O pp=101 -O vp=102 atf_check egrep -q "Port created successfully" port-create.txt atf_check egrep -q "frontend: *ioctl" port-create.txt atf_check egrep -q "port: *[0-9]+" port-create.txt portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf ioctl if ! egrep -q '101[[:space:]]+102' portlist.txt; then ctladm portlist atf_fail "Did not create the port with the specified options" fi } create_ioctl_options_cleanup() { cleanup ioctl } atf_test_case disable_ioctl cleanup disable_ioctl_head() { atf_set "descr" "ctladm can disable an ioctl port" atf_set "require.user" "root" } disable_ioctl_body() { skip_if_ctld atf_check -o save:port-create.txt ctladm port -c -d "ioctl" portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf ioctl atf_check -o ignore ctladm port -o off -p $portnum atf_check -o match:"^$portnum *NO" ctladm portlist -qf ioctl } disable_ioctl_cleanup() { cleanup ioctl } atf_test_case enable_ioctl cleanup enable_ioctl_head() { atf_set "descr" "ctladm can enable an ioctl port" atf_set "require.user" "root" } enable_ioctl_body() { skip_if_ctld atf_check -o save:port-create.txt ctladm port -c -d "ioctl" portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf ioctl atf_check -o ignore ctladm port -o off -p $portnum atf_check -o ignore ctladm port -o on -p $portnum atf_check -o match:"^$portnum *YES" ctladm portlist -qf ioctl } enable_ioctl_cleanup() { cleanup ioctl } atf_test_case remove_ioctl remove_ioctl_head() { atf_set "descr" "ctladm can remove an ioctl port" atf_set "require.user" "root" } remove_ioctl_body() { skip_if_ctld # Specify exact pp and vp to make the post-removal portlist check # unambiguous atf_check -o save:port-create.txt ctladm port -c -d "ioctl" -O pp=10001 -O vp=10002 portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf ioctl atf_check -o inline:"Port destroyed successfully\n" ctladm port -r -d ioctl -p $portnum # Check that the port was removed. A new port may have been added with # the same ID, so match against the pp and vp numbers, too. if ctladm portlist -qf ioctl | egrep -q "^${portnum} .*10001 *10002"; then ctladm portlist -qf ioctl atf_fail "port was not removed" fi } atf_test_case remove_iscsi remove_iscsi_head() { atf_set "descr" "ctladm can remove an iscsi port" atf_set "require.user" "root" } remove_iscsi_body() { skip_if_ctld load_cfiscsi TARGET=iqn.2018-10.myhost.remove_iscsi atf_check -o save:port-create.txt ctladm port -c -d "iscsi" -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" portnum=`awk '/port:/ {print $2}' port-create.txt` atf_check -o save:portlist.txt ctladm portlist -qf iscsi - atf_check -o inline:"Port destroyed successfully\n" ctladm port -r -d iscsi -p 9999 -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" + atf_check -o inline:"Port destroyed successfully\n" ctladm port -r -d iscsi -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" # Check that the port was removed. A new port may have been added with # the same ID, so match against the target and tag, too. PGTAGHEX=0x7631 # PGTAG in hex if ctladm portlist -qf iscsi | egrep -q "^${portnum} .*$PGTAG +[0-9]+ +$TARGET,t,$PGTAGHEX"; then ctladm portlist -qf iscsi atf_fail "port was not removed" fi } atf_test_case remove_iscsi_without_required_args cleanup remove_iscsi_without_required_args_head() { atf_set "descr" "ctladm will gracefully fail to remove an iSCSI target if required arguments are missing" atf_set "require.user" "root" } remove_iscsi_without_required_args_body() { skip_if_ctld load_cfiscsi TARGET=iqn.2018-10.myhost.remove_iscsi_without_required_args atf_check -o save:port-create.txt ctladm port -c -d "iscsi" -O cfiscsi_portal_group_tag=$PGTAG -O cfiscsi_target="$TARGET" echo "target: $TARGET" >> port-create.txt - atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_portal_group_tag" ctladm port -r -d iscsi -p 9999 -O cfiscsi_target="$TARGET" - atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_target" ctladm port -r -d iscsi -p 9999 -O cfiscsi_portal_group_tag=$PGTAG + atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_portal_group_tag" ctladm port -r -d iscsi -O cfiscsi_target="$TARGET" + atf_check -s exit:1 -e match:"Missing required argument: cfiscsi_target" ctladm port -r -d iscsi -O cfiscsi_portal_group_tag=$PGTAG } remove_iscsi_without_required_args_cleanup() { cleanup iscsi } atf_init_test_cases() { atf_add_test_case create_ioctl atf_add_test_case create_iscsi atf_add_test_case create_iscsi_without_required_args atf_add_test_case create_iscsi_alias atf_add_test_case create_ioctl_options atf_add_test_case disable_ioctl atf_add_test_case enable_ioctl atf_add_test_case remove_ioctl + atf_add_test_case remove_ioctl_without_required_args atf_add_test_case remove_iscsi atf_add_test_case remove_iscsi_without_required_args }