diff --git a/sys/net80211/ieee80211.c b/sys/net80211/ieee80211.c index 74ee6276d919..5bd64a4e1160 100644 --- a/sys/net80211/ieee80211.c +++ b/sys/net80211/ieee80211.c @@ -1,1020 +1,1035 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 generic handler */ #include #include #include #include #include #include #include #include #include const char *ieee80211_phymode_name[] = { "auto", /* IEEE80211_MODE_AUTO */ "11a", /* IEEE80211_MODE_11A */ "11b", /* IEEE80211_MODE_11B */ "11g", /* IEEE80211_MODE_11G */ "FH", /* IEEE80211_MODE_FH */ "turboA", /* IEEE80211_MODE_TURBO_A */ "turboG", /* IEEE80211_MODE_TURBO_G */ }; /* list of all instances */ SLIST_HEAD(ieee80211_list, ieee80211com); static struct ieee80211_list ieee80211_list = SLIST_HEAD_INITIALIZER(ieee80211_list); static u_int8_t ieee80211_vapmap[32]; /* enough for 256 */ static struct mtx ieee80211_vap_mtx; MTX_SYSINIT(ieee80211, &ieee80211_vap_mtx, "net80211 instances", MTX_DEF); static void ieee80211_add_vap(struct ieee80211com *ic) { #define N(a) (sizeof(a)/sizeof(a[0])) int i; u_int8_t b; mtx_lock(&ieee80211_vap_mtx); ic->ic_vap = 0; for (i = 0; i < N(ieee80211_vapmap) && ieee80211_vapmap[i] == 0xff; i++) ic->ic_vap += NBBY; if (i == N(ieee80211_vapmap)) panic("vap table full"); for (b = ieee80211_vapmap[i]; b & 1; b >>= 1) ic->ic_vap++; setbit(ieee80211_vapmap, ic->ic_vap); SLIST_INSERT_HEAD(&ieee80211_list, ic, ic_next); mtx_unlock(&ieee80211_vap_mtx); #undef N } static void ieee80211_remove_vap(struct ieee80211com *ic) { mtx_lock(&ieee80211_vap_mtx); SLIST_REMOVE(&ieee80211_list, ic, ieee80211com, ic_next); KASSERT(ic->ic_vap < sizeof(ieee80211_vapmap)*NBBY, ("invalid vap id %d", ic->ic_vap)); KASSERT(isset(ieee80211_vapmap, ic->ic_vap), ("vap id %d not allocated", ic->ic_vap)); clrbit(ieee80211_vapmap, ic->ic_vap); mtx_unlock(&ieee80211_vap_mtx); } /* * Default reset method for use with the ioctl support. This * method is invoked after any state change in the 802.11 * layer that should be propagated to the hardware but not * require re-initialization of the 802.11 state machine (e.g * rescanning for an ap). We always return ENETRESET which * should cause the driver to re-initialize the device. Drivers * can override this method to implement more optimized support. */ static int ieee80211_default_reset(struct ifnet *ifp) { return ENETRESET; } void ieee80211_ifattach(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211_channel *c; int i; ether_ifattach(ifp, ic->ic_myaddr); bpfattach2(ifp, DLT_IEEE802_11, sizeof(struct ieee80211_frame_addr4), &ic->ic_rawbpf); ieee80211_crypto_attach(ic); /* * Fill in 802.11 available channel set, mark * all available channels as active, and pick * a default channel if not already specified. */ memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail)); ic->ic_modecaps |= 1<ic_channels[i]; if (c->ic_flags) { /* * Verify driver passed us valid data. */ if (i != ieee80211_chan2ieee(ic, c)) { if_printf(ifp, "bad channel ignored; " "freq %u flags %x number %u\n", c->ic_freq, c->ic_flags, i); c->ic_flags = 0; /* NB: remove */ continue; } setbit(ic->ic_chan_avail, i); /* * Identify mode capabilities. */ if (IEEE80211_IS_CHAN_A(c)) ic->ic_modecaps |= 1<ic_modecaps |= 1<ic_modecaps |= 1<ic_modecaps |= 1<ic_modecaps |= 1<ic_modecaps |= 1<ic_curchan == NULL) { /* arbitrarily pick the first channel */ ic->ic_curchan = &ic->ic_channels[i]; } } } /* validate ic->ic_curmode */ if ((ic->ic_modecaps & (1<ic_curmode)) == 0) ic->ic_curmode = IEEE80211_MODE_AUTO; ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */ #if 0 /* * Enable WME by default if we're capable. */ if (ic->ic_caps & IEEE80211_C_WME) ic->ic_flags |= IEEE80211_F_WME; #endif (void) ieee80211_setmode(ic, ic->ic_curmode); if (ic->ic_bintval == 0) ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT; ic->ic_bmisstimeout = 7*ic->ic_bintval; /* default 7 beacons */ ic->ic_dtim_period = IEEE80211_DTIM_DEFAULT; IEEE80211_BEACON_LOCK_INIT(ic, "beacon"); if (ic->ic_lintval == 0) ic->ic_lintval = ic->ic_bintval; ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX; ieee80211_node_attach(ic); ieee80211_proto_attach(ic); ieee80211_add_vap(ic); ieee80211_sysctl_attach(ic); /* NB: requires ic_vap */ /* * Install a default reset method for the ioctl support. * The driver is expected to fill this in before calling us. */ if (ic->ic_reset == NULL) ic->ic_reset = ieee80211_default_reset; } void ieee80211_ifdetach(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; ieee80211_remove_vap(ic); ieee80211_sysctl_detach(ic); ieee80211_proto_detach(ic); ieee80211_crypto_detach(ic); ieee80211_node_detach(ic); ifmedia_removeall(&ic->ic_media); IEEE80211_BEACON_LOCK_DESTROY(ic); bpfdetach(ifp); ether_ifdetach(ifp); } /* * Convert MHz frequency to IEEE channel number. */ -u_int +int ieee80211_mhz2ieee(u_int freq, u_int flags) { +#define IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990) if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */ if (freq == 2484) return 14; if (freq < 2484) - return (freq - 2407) / 5; + return ((int) freq - 2407) / 5; else return 15 + ((freq - 2512) / 20); } else if (flags & IEEE80211_CHAN_5GHZ) { /* 5Ghz band */ - return (freq - 5000) / 5; + if (IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) + return ((freq * 10) + + (((freq % 5) == 2) ? 5 : 0) - 49400) / 5; + if (freq <= 5000) + return (freq - 4000) / 5; + else + return (freq - 5000) / 5; } else { /* either, guess */ if (freq == 2484) return 14; if (freq < 2484) - return (freq - 2407) / 5; - if (freq < 5000) - return 15 + ((freq - 2512) / 20); + return ((int) freq - 2407) / 5; + if (freq < 5000) { + if (IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) + return ((freq * 10) + + (((freq % 5) == 2) ? 5 : 0) - 49400)/5; + else if (freq > 4900) + return (freq - 4000) / 5; + else + return 15 + ((freq - 2512) / 20); + } return (freq - 5000) / 5; } +#undef IS_CHAN_IN_PUBLIC_SAFETY_BAND } /* * Convert channel to IEEE channel number. */ -u_int +int ieee80211_chan2ieee(struct ieee80211com *ic, struct ieee80211_channel *c) { if (ic->ic_channels <= c && c <= &ic->ic_channels[IEEE80211_CHAN_MAX]) return c - ic->ic_channels; else if (c == IEEE80211_CHAN_ANYC) return IEEE80211_CHAN_ANY; else if (c != NULL) { if_printf(ic->ic_ifp, "invalid channel freq %u flags %x\n", c->ic_freq, c->ic_flags); return 0; /* XXX */ } else { if_printf(ic->ic_ifp, "invalid channel (NULL)\n"); return 0; /* XXX */ } } /* * Convert IEEE channel number to MHz frequency. */ u_int ieee80211_ieee2mhz(u_int chan, u_int flags) { if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */ if (chan == 14) return 2484; if (chan < 14) return 2407 + chan*5; else return 2512 + ((chan-15)*20); } else if (flags & IEEE80211_CHAN_5GHZ) {/* 5Ghz band */ return 5000 + (chan*5); } else { /* either, guess */ if (chan == 14) return 2484; if (chan < 14) /* 0-13 */ return 2407 + chan*5; if (chan < 27) /* 15-26 */ return 2512 + ((chan-15)*20); return 5000 + (chan*5); } } /* * Setup the media data structures according to the channel and * rate tables. This must be called by the driver after * ieee80211_attach and before most anything else. */ void ieee80211_media_init(struct ieee80211com *ic, ifm_change_cb_t media_change, ifm_stat_cb_t media_stat) { #define ADD(_ic, _s, _o) \ ifmedia_add(&(_ic)->ic_media, \ IFM_MAKEWORD(IFM_IEEE80211, (_s), (_o), 0), 0, NULL) struct ifnet *ifp = ic->ic_ifp; struct ifmediareq imr; int i, j, mode, rate, maxrate, mword, mopt, r; struct ieee80211_rateset *rs; struct ieee80211_rateset allrates; /* * Do late attach work that must wait for any subclass * (i.e. driver) work such as overriding methods. */ ieee80211_node_lateattach(ic); /* * Fill in media characteristics. */ ifmedia_init(&ic->ic_media, 0, media_change, media_stat); maxrate = 0; memset(&allrates, 0, sizeof(allrates)); for (mode = IEEE80211_MODE_AUTO; mode < IEEE80211_MODE_MAX; mode++) { static const u_int mopts[] = { IFM_AUTO, IFM_IEEE80211_11A, IFM_IEEE80211_11B, IFM_IEEE80211_11G, IFM_IEEE80211_FH, IFM_IEEE80211_11A | IFM_IEEE80211_TURBO, IFM_IEEE80211_11G | IFM_IEEE80211_TURBO, }; if ((ic->ic_modecaps & (1<ic_caps & IEEE80211_C_IBSS) ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_ADHOC); if (ic->ic_caps & IEEE80211_C_HOSTAP) ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_HOSTAP); if (ic->ic_caps & IEEE80211_C_AHDEMO) ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0); if (ic->ic_caps & IEEE80211_C_MONITOR) ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_MONITOR); if (mode == IEEE80211_MODE_AUTO) continue; rs = &ic->ic_sup_rates[mode]; for (i = 0; i < rs->rs_nrates; i++) { rate = rs->rs_rates[i]; mword = ieee80211_rate2media(ic, rate, mode); if (mword == 0) continue; ADD(ic, mword, mopt); if (ic->ic_caps & IEEE80211_C_IBSS) ADD(ic, mword, mopt | IFM_IEEE80211_ADHOC); if (ic->ic_caps & IEEE80211_C_HOSTAP) ADD(ic, mword, mopt | IFM_IEEE80211_HOSTAP); if (ic->ic_caps & IEEE80211_C_AHDEMO) ADD(ic, mword, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0); if (ic->ic_caps & IEEE80211_C_MONITOR) ADD(ic, mword, mopt | IFM_IEEE80211_MONITOR); /* * Add rate to the collection of all rates. */ r = rate & IEEE80211_RATE_VAL; for (j = 0; j < allrates.rs_nrates; j++) if (allrates.rs_rates[j] == r) break; if (j == allrates.rs_nrates) { /* unique, add to the set */ allrates.rs_rates[j] = r; allrates.rs_nrates++; } rate = (rate & IEEE80211_RATE_VAL) / 2; if (rate > maxrate) maxrate = rate; } } for (i = 0; i < allrates.rs_nrates; i++) { mword = ieee80211_rate2media(ic, allrates.rs_rates[i], IEEE80211_MODE_AUTO); if (mword == 0) continue; mword = IFM_SUBTYPE(mword); /* remove media options */ ADD(ic, mword, 0); if (ic->ic_caps & IEEE80211_C_IBSS) ADD(ic, mword, IFM_IEEE80211_ADHOC); if (ic->ic_caps & IEEE80211_C_HOSTAP) ADD(ic, mword, IFM_IEEE80211_HOSTAP); if (ic->ic_caps & IEEE80211_C_AHDEMO) ADD(ic, mword, IFM_IEEE80211_ADHOC | IFM_FLAG0); if (ic->ic_caps & IEEE80211_C_MONITOR) ADD(ic, mword, IFM_IEEE80211_MONITOR); } ieee80211_media_status(ifp, &imr); ifmedia_set(&ic->ic_media, imr.ifm_active); if (maxrate) ifp->if_baudrate = IF_Mbps(maxrate); #undef ADD } void ieee80211_announce(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; int i, mode, rate, mword; struct ieee80211_rateset *rs; for (mode = IEEE80211_MODE_11A; mode < IEEE80211_MODE_MAX; mode++) { if ((ic->ic_modecaps & (1<ic_sup_rates[mode]; for (i = 0; i < rs->rs_nrates; i++) { rate = rs->rs_rates[i]; mword = ieee80211_rate2media(ic, rate, mode); if (mword == 0) continue; printf("%s%d%sMbps", (i != 0 ? " " : ""), (rate & IEEE80211_RATE_VAL) / 2, ((rate & 0x1) != 0 ? ".5" : "")); } printf("\n"); } } static int findrate(struct ieee80211com *ic, enum ieee80211_phymode mode, int rate) { #define IEEERATE(_ic,_m,_i) \ ((_ic)->ic_sup_rates[_m].rs_rates[_i] & IEEE80211_RATE_VAL) int i, nrates = ic->ic_sup_rates[mode].rs_nrates; for (i = 0; i < nrates; i++) if (IEEERATE(ic, mode, i) == rate) return i; return -1; #undef IEEERATE } /* * Find an instance by it's mac address. */ struct ieee80211com * ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic; /* XXX lock */ SLIST_FOREACH(ic, &ieee80211_list, ic_next) if (IEEE80211_ADDR_EQ(mac, ic->ic_myaddr)) return ic; return NULL; } static struct ieee80211com * ieee80211_find_instance(struct ifnet *ifp) { struct ieee80211com *ic; /* XXX lock */ /* XXX not right for multiple instances but works for now */ SLIST_FOREACH(ic, &ieee80211_list, ic_next) if (ic->ic_ifp == ifp) return ic; return NULL; } /* * Handle a media change request. */ int ieee80211_media_change(struct ifnet *ifp) { struct ieee80211com *ic; struct ifmedia_entry *ime; enum ieee80211_opmode newopmode; enum ieee80211_phymode newphymode; int i, j, newrate, error = 0; ic = ieee80211_find_instance(ifp); if (!ic) { if_printf(ifp, "%s: no 802.11 instance!\n", __func__); return EINVAL; } ime = ic->ic_media.ifm_cur; /* * First, identify the phy mode. */ switch (IFM_MODE(ime->ifm_media)) { case IFM_IEEE80211_11A: newphymode = IEEE80211_MODE_11A; break; case IFM_IEEE80211_11B: newphymode = IEEE80211_MODE_11B; break; case IFM_IEEE80211_11G: newphymode = IEEE80211_MODE_11G; break; case IFM_IEEE80211_FH: newphymode = IEEE80211_MODE_FH; break; case IFM_AUTO: newphymode = IEEE80211_MODE_AUTO; break; default: return EINVAL; } /* * Turbo mode is an ``option''. * XXX does not apply to AUTO */ if (ime->ifm_media & IFM_IEEE80211_TURBO) { if (newphymode == IEEE80211_MODE_11A) newphymode = IEEE80211_MODE_TURBO_A; else if (newphymode == IEEE80211_MODE_11G) newphymode = IEEE80211_MODE_TURBO_G; else return EINVAL; } /* * Validate requested mode is available. */ if ((ic->ic_modecaps & (1<ifm_media) != IFM_AUTO) { /* * Convert media subtype to rate. */ newrate = ieee80211_media2rate(ime->ifm_media); if (newrate == 0) return EINVAL; /* * Check the rate table for the specified/current phy. */ if (newphymode == IEEE80211_MODE_AUTO) { /* * In autoselect mode search for the rate. */ for (j = IEEE80211_MODE_11A; j < IEEE80211_MODE_MAX; j++) { if ((ic->ic_modecaps & (1<ifm_media & (IFM_IEEE80211_ADHOC|IFM_FLAG0)) == (IFM_IEEE80211_ADHOC|IFM_FLAG0)) newopmode = IEEE80211_M_AHDEMO; else if (ime->ifm_media & IFM_IEEE80211_HOSTAP) newopmode = IEEE80211_M_HOSTAP; else if (ime->ifm_media & IFM_IEEE80211_ADHOC) newopmode = IEEE80211_M_IBSS; else if (ime->ifm_media & IFM_IEEE80211_MONITOR) newopmode = IEEE80211_M_MONITOR; else newopmode = IEEE80211_M_STA; /* * Autoselect doesn't make sense when operating as an AP. * If no phy mode has been selected, pick one and lock it * down so rate tables can be used in forming beacon frames * and the like. */ if (newopmode == IEEE80211_M_HOSTAP && newphymode == IEEE80211_MODE_AUTO) { for (j = IEEE80211_MODE_11A; j < IEEE80211_MODE_MAX; j++) if (ic->ic_modecaps & (1<ic_curmode != newphymode) { /* change phy mode */ error = ieee80211_setmode(ic, newphymode); if (error != 0) return error; error = ENETRESET; } /* * Committed to changes, install the rate setting. */ if (ic->ic_fixed_rate != i) { ic->ic_fixed_rate = i; /* set fixed tx rate */ error = ENETRESET; } /* * Handle operating mode change. */ if (ic->ic_opmode != newopmode) { ic->ic_opmode = newopmode; switch (newopmode) { case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: case IEEE80211_M_STA: case IEEE80211_M_MONITOR: ic->ic_flags &= ~IEEE80211_F_IBSSON; break; case IEEE80211_M_IBSS: ic->ic_flags |= IEEE80211_F_IBSSON; break; } /* * Yech, slot time may change depending on the * operating mode so reset it to be sure everything * is setup appropriately. */ ieee80211_reset_erp(ic); ieee80211_wme_initparams(ic); /* after opmode change */ error = ENETRESET; } #ifdef notdef if (error == 0) ifp->if_baudrate = ifmedia_baudrate(ime->ifm_media); #endif return error; } void ieee80211_media_status(struct ifnet *ifp, struct ifmediareq *imr) { struct ieee80211com *ic; struct ieee80211_rateset *rs; ic = ieee80211_find_instance(ifp); if (!ic) { if_printf(ifp, "%s: no 802.11 instance!\n", __func__); return; } imr->ifm_status = IFM_AVALID; imr->ifm_active = IFM_IEEE80211; if (ic->ic_state == IEEE80211_S_RUN) imr->ifm_status |= IFM_ACTIVE; /* * Calculate a current rate if possible. */ if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) { /* * A fixed rate is set, report that. */ rs = &ic->ic_sup_rates[ic->ic_curmode]; imr->ifm_active |= ieee80211_rate2media(ic, rs->rs_rates[ic->ic_fixed_rate], ic->ic_curmode); } else if (ic->ic_opmode == IEEE80211_M_STA) { /* * In station mode report the current transmit rate. */ rs = &ic->ic_bss->ni_rates; imr->ifm_active |= ieee80211_rate2media(ic, rs->rs_rates[ic->ic_bss->ni_txrate], ic->ic_curmode); } else imr->ifm_active |= IFM_AUTO; switch (ic->ic_opmode) { case IEEE80211_M_STA: break; case IEEE80211_M_IBSS: imr->ifm_active |= IFM_IEEE80211_ADHOC; break; case IEEE80211_M_AHDEMO: /* should not come here */ break; case IEEE80211_M_HOSTAP: imr->ifm_active |= IFM_IEEE80211_HOSTAP; break; case IEEE80211_M_MONITOR: imr->ifm_active |= IFM_IEEE80211_MONITOR; break; } switch (ic->ic_curmode) { case IEEE80211_MODE_11A: imr->ifm_active |= IFM_IEEE80211_11A; break; case IEEE80211_MODE_11B: imr->ifm_active |= IFM_IEEE80211_11B; break; case IEEE80211_MODE_11G: imr->ifm_active |= IFM_IEEE80211_11G; break; case IEEE80211_MODE_FH: imr->ifm_active |= IFM_IEEE80211_FH; break; case IEEE80211_MODE_TURBO_A: imr->ifm_active |= IFM_IEEE80211_11A | IFM_IEEE80211_TURBO; break; case IEEE80211_MODE_TURBO_G: imr->ifm_active |= IFM_IEEE80211_11G | IFM_IEEE80211_TURBO; break; } } void ieee80211_watchdog(struct ieee80211com *ic) { struct ieee80211_node_table *nt; int need_inact_timer = 0; if (ic->ic_state != IEEE80211_S_INIT) { if (ic->ic_mgt_timer && --ic->ic_mgt_timer == 0) ieee80211_new_state(ic, IEEE80211_S_SCAN, 0); nt = &ic->ic_scan; if (nt->nt_inact_timer) { if (--nt->nt_inact_timer == 0) nt->nt_timeout(nt); need_inact_timer += nt->nt_inact_timer; } nt = &ic->ic_sta; if (nt->nt_inact_timer) { if (--nt->nt_inact_timer == 0) nt->nt_timeout(nt); need_inact_timer += nt->nt_inact_timer; } } if (ic->ic_mgt_timer != 0 || need_inact_timer) ic->ic_ifp->if_timer = 1; } /* * Set the current phy mode and recalculate the active channel * set based on the available channels for this mode. Also * select a new default/current channel if the current one is * inappropriate for this mode. */ int ieee80211_setmode(struct ieee80211com *ic, enum ieee80211_phymode mode) { #define N(a) (sizeof(a) / sizeof(a[0])) static const u_int chanflags[] = { 0, /* IEEE80211_MODE_AUTO */ IEEE80211_CHAN_A, /* IEEE80211_MODE_11A */ IEEE80211_CHAN_B, /* IEEE80211_MODE_11B */ IEEE80211_CHAN_PUREG, /* IEEE80211_MODE_11G */ IEEE80211_CHAN_FHSS, /* IEEE80211_MODE_FH */ IEEE80211_CHAN_T, /* IEEE80211_MODE_TURBO_A */ IEEE80211_CHAN_108G, /* IEEE80211_MODE_TURBO_G */ }; struct ieee80211_channel *c; u_int modeflags; int i; /* validate new mode */ if ((ic->ic_modecaps & (1<ic_modecaps); return EINVAL; } /* * Verify at least one channel is present in the available * channel list before committing to the new mode. */ KASSERT(mode < N(chanflags), ("Unexpected mode %u", mode)); modeflags = chanflags[mode]; for (i = 0; i <= IEEE80211_CHAN_MAX; i++) { c = &ic->ic_channels[i]; if (mode == IEEE80211_MODE_AUTO) { /* ignore turbo channels for autoselect */ if ((c->ic_flags &~ IEEE80211_CHAN_TURBO) != 0) break; } else { if ((c->ic_flags & modeflags) == modeflags) break; } } if (i > IEEE80211_CHAN_MAX) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, "%s: no channels found for mode %u\n", __func__, mode); return EINVAL; } /* * Calculate the active channel set. */ memset(ic->ic_chan_active, 0, sizeof(ic->ic_chan_active)); for (i = 0; i <= IEEE80211_CHAN_MAX; i++) { c = &ic->ic_channels[i]; if (mode == IEEE80211_MODE_AUTO) { /* take anything but pure turbo channels */ if ((c->ic_flags &~ IEEE80211_CHAN_TURBO) != 0) setbit(ic->ic_chan_active, i); } else { if ((c->ic_flags & modeflags) == modeflags) setbit(ic->ic_chan_active, i); } } /* * If no current/default channel is setup or the current * channel is wrong for the mode then pick the first * available channel from the active list. This is likely * not the right one. */ if (ic->ic_ibss_chan == NULL || isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_ibss_chan))) { for (i = 0; i <= IEEE80211_CHAN_MAX; i++) if (isset(ic->ic_chan_active, i)) { ic->ic_ibss_chan = &ic->ic_channels[i]; break; } KASSERT(ic->ic_ibss_chan != NULL && isset(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_ibss_chan)), ("Bad IBSS channel %u", ieee80211_chan2ieee(ic, ic->ic_ibss_chan))); } /* * If the desired channel is set but no longer valid then reset it. */ if (ic->ic_des_chan != IEEE80211_CHAN_ANYC && isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_des_chan))) ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* * Do mode-specific rate setup. */ if (mode == IEEE80211_MODE_11G) { /* * Use a mixed 11b/11g rate set. */ ieee80211_set11gbasicrates(&ic->ic_sup_rates[mode], IEEE80211_MODE_11G); } else if (mode == IEEE80211_MODE_11B) { /* * Force pure 11b rate set. */ ieee80211_set11gbasicrates(&ic->ic_sup_rates[mode], IEEE80211_MODE_11B); } /* * Setup an initial rate set according to the * current/default channel selected above. This * will be changed when scanning but must exist * now so driver have a consistent state of ic_ibss_chan. */ if (ic->ic_bss) /* NB: can be called before lateattach */ ic->ic_bss->ni_rates = ic->ic_sup_rates[mode]; ic->ic_curmode = mode; ieee80211_reset_erp(ic); /* reset ERP state */ ieee80211_wme_initparams(ic); /* reset WME stat */ return 0; #undef N } /* * Return the phy mode for with the specified channel so the * caller can select a rate set. This is problematic for channels * where multiple operating modes are possible (e.g. 11g+11b). * In those cases we defer to the current operating mode when set. */ enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *ic, struct ieee80211_channel *chan) { if (IEEE80211_IS_CHAN_5GHZ(chan)) { /* * This assumes all 11a turbo channels are also * usable withut turbo, which is currently true. */ if (ic->ic_curmode == IEEE80211_MODE_TURBO_A) return IEEE80211_MODE_TURBO_A; return IEEE80211_MODE_11A; } else if (IEEE80211_IS_CHAN_FHSS(chan)) return IEEE80211_MODE_FH; else if (chan->ic_flags & (IEEE80211_CHAN_OFDM|IEEE80211_CHAN_DYN)) { /* * This assumes all 11g channels are also usable * for 11b, which is currently true. */ if (ic->ic_curmode == IEEE80211_MODE_TURBO_G) return IEEE80211_MODE_TURBO_G; if (ic->ic_curmode == IEEE80211_MODE_11B) return IEEE80211_MODE_11B; return IEEE80211_MODE_11G; } else return IEEE80211_MODE_11B; } /* * convert IEEE80211 rate value to ifmedia subtype. * ieee80211 rate is in unit of 0.5Mbps. */ int ieee80211_rate2media(struct ieee80211com *ic, int rate, enum ieee80211_phymode mode) { #define N(a) (sizeof(a) / sizeof(a[0])) static const struct { u_int m; /* rate + mode */ u_int r; /* if_media rate */ } rates[] = { { 2 | IFM_IEEE80211_FH, IFM_IEEE80211_FH1 }, { 4 | IFM_IEEE80211_FH, IFM_IEEE80211_FH2 }, { 2 | IFM_IEEE80211_11B, IFM_IEEE80211_DS1 }, { 4 | IFM_IEEE80211_11B, IFM_IEEE80211_DS2 }, { 11 | IFM_IEEE80211_11B, IFM_IEEE80211_DS5 }, { 22 | IFM_IEEE80211_11B, IFM_IEEE80211_DS11 }, { 44 | IFM_IEEE80211_11B, IFM_IEEE80211_DS22 }, { 12 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM6 }, { 18 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM9 }, { 24 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM12 }, { 36 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM18 }, { 48 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM24 }, { 72 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM36 }, { 96 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM48 }, { 108 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM54 }, { 2 | IFM_IEEE80211_11G, IFM_IEEE80211_DS1 }, { 4 | IFM_IEEE80211_11G, IFM_IEEE80211_DS2 }, { 11 | IFM_IEEE80211_11G, IFM_IEEE80211_DS5 }, { 22 | IFM_IEEE80211_11G, IFM_IEEE80211_DS11 }, { 12 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM6 }, { 18 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM9 }, { 24 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM12 }, { 36 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM18 }, { 48 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM24 }, { 72 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM36 }, { 96 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM48 }, { 108 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM54 }, /* NB: OFDM72 doesn't realy exist so we don't handle it */ }; u_int mask, i; mask = rate & IEEE80211_RATE_VAL; switch (mode) { case IEEE80211_MODE_11A: case IEEE80211_MODE_TURBO_A: mask |= IFM_IEEE80211_11A; break; case IEEE80211_MODE_11B: mask |= IFM_IEEE80211_11B; break; case IEEE80211_MODE_FH: mask |= IFM_IEEE80211_FH; break; case IEEE80211_MODE_AUTO: /* NB: ic may be NULL for some drivers */ if (ic && ic->ic_phytype == IEEE80211_T_FH) { mask |= IFM_IEEE80211_FH; break; } /* NB: hack, 11g matches both 11b+11a rates */ /* fall thru... */ case IEEE80211_MODE_11G: case IEEE80211_MODE_TURBO_G: mask |= IFM_IEEE80211_11G; break; } for (i = 0; i < N(rates); i++) if (rates[i].m == mask) return rates[i].r; return IFM_AUTO; #undef N } int ieee80211_media2rate(int mword) { #define N(a) (sizeof(a) / sizeof(a[0])) static const int ieeerates[] = { -1, /* IFM_AUTO */ 0, /* IFM_MANUAL */ 0, /* IFM_NONE */ 2, /* IFM_IEEE80211_FH1 */ 4, /* IFM_IEEE80211_FH2 */ 2, /* IFM_IEEE80211_DS1 */ 4, /* IFM_IEEE80211_DS2 */ 11, /* IFM_IEEE80211_DS5 */ 22, /* IFM_IEEE80211_DS11 */ 44, /* IFM_IEEE80211_DS22 */ 12, /* IFM_IEEE80211_OFDM6 */ 18, /* IFM_IEEE80211_OFDM9 */ 24, /* IFM_IEEE80211_OFDM12 */ 36, /* IFM_IEEE80211_OFDM18 */ 48, /* IFM_IEEE80211_OFDM24 */ 72, /* IFM_IEEE80211_OFDM36 */ 96, /* IFM_IEEE80211_OFDM48 */ 108, /* IFM_IEEE80211_OFDM54 */ 144, /* IFM_IEEE80211_OFDM72 */ }; return IFM_SUBTYPE(mword) < N(ieeerates) ? ieeerates[IFM_SUBTYPE(mword)] : 0; #undef N } diff --git a/sys/net80211/ieee80211_var.h b/sys/net80211/ieee80211_var.h index c552d36a8aa1..05a8849bffac 100644 --- a/sys/net80211/ieee80211_var.h +++ b/sys/net80211/ieee80211_var.h @@ -1,415 +1,415 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ #define IEEE80211_DEBUG #undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */ /* NB: portability glue must go first */ #ifdef __NetBSD__ #include #elif __FreeBSD__ #include #elif __linux__ #include #else #error "No support for your operating system!" #endif #include #include #include #include /* for ieee80211_stats */ #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_MAX 15 /* max DTIM period */ #define IEEE80211_DTIM_MIN 1 /* min DTIM period */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ /* NB: min+max come from WiFi requirements */ #define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TU's) */ #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE -1 #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) struct ieee80211_aclator; struct sysctl_ctx_list; struct ieee80211com { SLIST_ENTRY(ieee80211com) ic_next; struct ifnet *ic_ifp; /* associated device */ struct ieee80211_stats ic_stats; /* statistics */ struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */ u_int32_t ic_debug; /* debug msg flags */ int ic_vap; /* virtual AP index */ ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */ int (*ic_reset)(struct ifnet *); void (*ic_recv_mgmt)(struct ieee80211com *, struct mbuf *, struct ieee80211_node *, int, int, u_int32_t); int (*ic_send_mgmt)(struct ieee80211com *, struct ieee80211_node *, int, int); int (*ic_newstate)(struct ieee80211com *, enum ieee80211_state, int); void (*ic_newassoc)(struct ieee80211_node *, int); void (*ic_updateslot)(struct ifnet *); void (*ic_set_tim)(struct ieee80211_node *, int); u_int8_t ic_myaddr[IEEE80211_ADDR_LEN]; struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1]; u_int8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; u_int8_t ic_chan_active[IEEE80211_CHAN_BYTES]; u_int8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_node_table ic_scan; /* scan candidates */ struct ifqueue ic_mgtq; u_int32_t ic_flags; /* state flags */ u_int32_t ic_flags_ext; /* extended state flags */ u_int32_t ic_caps; /* capabilities */ u_int16_t ic_modecaps; /* set of mode capabilities */ u_int16_t ic_curmode; /* current mode */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ enum ieee80211_state ic_state; /* 802.11 state */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ enum ieee80211_roamingmode ic_roaming; /* roaming mode */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ u_int32_t *ic_aid_bitmap; /* association id map */ u_int16_t ic_max_aid; u_int16_t ic_sta_assoc; /* stations associated */ u_int16_t ic_ps_sta; /* stations in power save */ u_int16_t ic_ps_pending; /* ps sta's w/ pending frames */ u_int8_t *ic_tim_bitmap; /* power-save stations w/ data*/ u_int16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */ u_int8_t ic_dtim_period; /* DTIM period */ u_int8_t ic_dtim_count; /* DTIM count for last bcn */ struct ifmedia ic_media; /* interface media config */ struct bpf_if *ic_rawbpf; /* packet filter structure */ struct ieee80211_node *ic_bss; /* information for this node */ struct ieee80211_channel *ic_ibss_chan; struct ieee80211_channel *ic_curchan; /* current channel */ int ic_fixed_rate; /* index to ic_sup_rates[] */ u_int16_t ic_rtsthreshold; u_int16_t ic_fragthreshold; struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); u_int8_t (*ic_node_getrssi)(const struct ieee80211_node*); u_int16_t ic_lintval; /* listen interval */ u_int16_t ic_bintval; /* beacon interval */ u_int16_t ic_holdover; /* PM hold over duration */ u_int16_t ic_txmin; /* min tx retry count */ u_int16_t ic_txmax; /* max tx retry count */ u_int16_t ic_txlifetime; /* tx lifetime */ u_int16_t ic_txpowlimit; /* global tx power limit */ u_int16_t ic_bmisstimeout;/* beacon miss threshold (ms) */ u_int16_t ic_nonerpsta; /* # non-ERP stations */ u_int16_t ic_longslotsta; /* # long slot time stations */ int ic_mgt_timer; /* mgmt timeout */ int ic_inact_timer; /* inactivity timer wait */ int ic_des_esslen; u_int8_t ic_des_essid[IEEE80211_NWID_LEN]; struct ieee80211_channel *ic_des_chan; /* desired channel */ u_int8_t ic_des_bssid[IEEE80211_ADDR_LEN]; void *ic_opt_ie; /* user-specified IE's */ u_int16_t ic_opt_ie_len; /* length of ni_opt_ie */ /* * Inactivity timer settings for nodes. */ int ic_inact_init; /* initial setting */ int ic_inact_auth; /* auth but not assoc setting */ int ic_inact_run; /* authorized setting */ int ic_inact_probe; /* inactive probe time */ /* * WME/WMM state. */ struct ieee80211_wme_state ic_wme; /* * Cipher state/configuration. */ struct ieee80211_crypto_state ic_crypto; #define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */ #define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */ /* * 802.1x glue. When an authenticator attaches it * fills in this section. We assume that when ic_ec * is setup that the methods are safe to call. */ const struct ieee80211_authenticator *ic_auth; struct eapolcom *ic_ec; /* * Access control glue. When a control agent attaches * it fills in this section. We assume that when ic_ac * is setup that the methods are safe to call. */ const struct ieee80211_aclator *ic_acl; void *ic_as; }; #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags */ /* NB: bits 0x4c available */ #define IEEE80211_F_FF 0x00000001 /* CONF: ATH FF enabled */ #define IEEE80211_F_TURBOP 0x00000002 /* CONF: ATH Turbo enabled*/ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */ /* ic_flags_ext */ #define IEEE80211_FEXT_WDS 0x00000001 /* CONF: 4 addr allowed */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: enable full bgscan completion */ /* ic_caps */ #define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */ #define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */ #define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */ #define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */ #define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ /* XXX protection/barker? */ #define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */ void ieee80211_ifattach(struct ieee80211com *); void ieee80211_ifdetach(struct ieee80211com *); void ieee80211_announce(struct ieee80211com *); void ieee80211_media_init(struct ieee80211com *, ifm_change_cb_t, ifm_stat_cb_t); struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t); int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t); int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t); void ieee80211_watchdog(struct ieee80211com *); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); -u_int ieee80211_mhz2ieee(u_int, u_int); -u_int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *); +int ieee80211_mhz2ieee(u_int, u_int); +int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *, struct ieee80211_channel *); /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211com *ic) { ic->ic_crypto.cs_key_update_begin(ic); } static __inline void ieee80211_key_update_end(struct ieee80211com *ic) { ic->ic_crypto.cs_key_update_end(ic); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(u_int32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(u_int32_t)); return size; } #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #ifdef IEEE80211_DEBUG #define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m)) #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \ if (ieee80211_msg(_ic, _m)) \ ieee80211_note(_ic, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_ic, _m)) \ ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_ic, _m)) \ ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_ic, _m)) \ ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...); void ieee80211_note_mac(struct ieee80211com *ic, const u_int8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...); void ieee80211_note_frame(struct ieee80211com *ic, const struct ieee80211_frame *wh, const char *fmt, ...); #define ieee80211_msg_debug(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_ic) \ ((_ic)->ic_debug & IEEE80211_MSG_ASSOC) #else #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_ic) 0 #define ieee80211_msg(_ic, _m) 0 #endif #endif /* _NET80211_IEEE80211_VAR_H_ */