diff --git a/configure.ac b/configure.ac index 6f34b210d2b7..ebc7b276a640 100644 --- a/configure.ac +++ b/configure.ac @@ -1,417 +1,418 @@ /* * This file is part of the ZFS Linux port. * * Copyright (c) 2009 Lawrence Livermore National Security, LLC. * Produced at Lawrence Livermore National Laboratory * Written by: * Brian Behlendorf , * Herb Wartens , * Jim Garlick * LLNL-CODE-403049 * * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ AC_INIT(m4_esyscmd(grep ^Name: META | cut -d ':' -f 2 | tr -d ' \n'), m4_esyscmd(grep ^Version: META | cut -d ':' -f 2 | tr -d ' \n')) AC_LANG(C) ZFS_AC_META AC_CONFIG_AUX_DIR([config]) AC_CONFIG_MACRO_DIR([config]) AC_CANONICAL_TARGET AM_MAINTAINER_MODE m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) AM_INIT_AUTOMAKE([subdir-objects]) AC_CONFIG_HEADERS([zfs_config.h], [ (mv zfs_config.h zfs_config.h.tmp && awk -f ${ac_srcdir}/config/config.awk zfs_config.h.tmp >zfs_config.h && rm zfs_config.h.tmp) || exit 1]) LT_INIT AC_PROG_INSTALL AC_PROG_CC AC_PROG_LN_S PKG_PROG_PKG_CONFIG AM_PROG_AS AM_PROG_CC_C_O AX_CODE_COVERAGE _AM_PROG_TAR(pax) ZFS_AC_LICENSE ZFS_AC_CONFIG ZFS_AC_PACKAGE ZFS_AC_DEBUG ZFS_AC_DEBUGINFO ZFS_AC_DEBUG_KMEM ZFS_AC_DEBUG_KMEM_TRACKING ZFS_AC_DEBUG_INVARIANTS AC_CONFIG_FILES([ Makefile cmd/Makefile cmd/arc_summary/Makefile cmd/arcstat/Makefile cmd/dbufstat/Makefile cmd/fsck_zfs/Makefile cmd/mount_zfs/Makefile cmd/raidz_test/Makefile cmd/vdev_id/Makefile cmd/zdb/Makefile cmd/zed/Makefile cmd/zed/zed.d/Makefile cmd/zfs/Makefile cmd/zfs_ids_to_path/Makefile cmd/zgenhostid/Makefile cmd/zhack/Makefile cmd/zinject/Makefile cmd/zpool/Makefile cmd/zstream/Makefile cmd/ztest/Makefile cmd/zvol_id/Makefile cmd/zvol_wait/Makefile cmd/zpool_influxdb/Makefile contrib/Makefile contrib/bash_completion.d/Makefile contrib/bpftrace/Makefile contrib/dracut/02zfsexpandknowledge/Makefile contrib/dracut/90zfs/Makefile contrib/dracut/Makefile contrib/initramfs/Makefile contrib/initramfs/conf.d/Makefile contrib/initramfs/conf-hooks.d/Makefile contrib/initramfs/hooks/Makefile contrib/initramfs/scripts/Makefile contrib/initramfs/scripts/local-top/Makefile contrib/pam_zfs_key/Makefile contrib/pyzfs/Makefile contrib/pyzfs/setup.py contrib/zcp/Makefile etc/Makefile etc/default/Makefile etc/init.d/Makefile etc/modules-load.d/Makefile etc/sudoers.d/Makefile etc/systemd/Makefile etc/systemd/system-generators/Makefile etc/systemd/system/Makefile etc/zfs/Makefile include/Makefile include/os/Makefile include/os/freebsd/Makefile include/os/freebsd/linux/Makefile include/os/freebsd/spl/Makefile include/os/freebsd/spl/acl/Makefile include/os/freebsd/spl/rpc/Makefile include/os/freebsd/spl/sys/Makefile include/os/freebsd/zfs/Makefile include/os/freebsd/zfs/sys/Makefile include/os/linux/Makefile include/os/linux/kernel/Makefile include/os/linux/kernel/linux/Makefile include/os/linux/spl/Makefile include/os/linux/spl/rpc/Makefile include/os/linux/spl/sys/Makefile include/os/linux/zfs/Makefile include/os/linux/zfs/sys/Makefile include/sys/Makefile include/sys/crypto/Makefile include/sys/fm/Makefile include/sys/fm/fs/Makefile include/sys/fs/Makefile include/sys/lua/Makefile include/sys/sysevent/Makefile include/sys/zstd/Makefile lib/Makefile lib/libavl/Makefile lib/libefi/Makefile lib/libicp/Makefile lib/libnvpair/Makefile lib/libshare/Makefile lib/libspl/Makefile lib/libspl/include/Makefile lib/libspl/include/ia32/Makefile lib/libspl/include/ia32/sys/Makefile lib/libspl/include/os/Makefile lib/libspl/include/os/freebsd/Makefile lib/libspl/include/os/freebsd/sys/Makefile lib/libspl/include/os/linux/Makefile lib/libspl/include/os/linux/sys/Makefile lib/libspl/include/rpc/Makefile lib/libspl/include/sys/Makefile lib/libspl/include/sys/dktp/Makefile lib/libspl/include/util/Makefile lib/libtpool/Makefile lib/libunicode/Makefile lib/libuutil/Makefile lib/libzfs/Makefile lib/libzfs/libzfs.pc lib/libzfsbootenv/Makefile lib/libzfsbootenv/libzfsbootenv.pc lib/libzfs_core/Makefile lib/libzfs_core/libzfs_core.pc lib/libzpool/Makefile lib/libzstd/Makefile lib/libzutil/Makefile man/Makefile module/Kbuild module/Makefile module/avl/Makefile module/icp/Makefile module/lua/Makefile module/nvpair/Makefile module/os/linux/spl/Makefile module/os/linux/zfs/Makefile module/spl/Makefile module/unicode/Makefile module/zcommon/Makefile module/zfs/Makefile module/zstd/Makefile rpm/Makefile rpm/generic/Makefile rpm/generic/zfs-dkms.spec rpm/generic/zfs-kmod.spec rpm/generic/zfs.spec rpm/redhat/Makefile rpm/redhat/zfs-dkms.spec rpm/redhat/zfs-kmod.spec rpm/redhat/zfs.spec scripts/Makefile tests/Makefile tests/runfiles/Makefile tests/test-runner/Makefile tests/test-runner/bin/Makefile tests/test-runner/include/Makefile tests/test-runner/man/Makefile tests/zfs-tests/Makefile tests/zfs-tests/callbacks/Makefile tests/zfs-tests/cmd/Makefile tests/zfs-tests/cmd/badsend/Makefile tests/zfs-tests/cmd/btree_test/Makefile tests/zfs-tests/cmd/chg_usr_exec/Makefile tests/zfs-tests/cmd/devname2devid/Makefile tests/zfs-tests/cmd/draid/Makefile tests/zfs-tests/cmd/dir_rd_update/Makefile tests/zfs-tests/cmd/file_check/Makefile tests/zfs-tests/cmd/file_trunc/Makefile tests/zfs-tests/cmd/file_write/Makefile tests/zfs-tests/cmd/get_diff/Makefile tests/zfs-tests/cmd/largest_file/Makefile tests/zfs-tests/cmd/libzfs_input_check/Makefile tests/zfs-tests/cmd/mkbusy/Makefile tests/zfs-tests/cmd/mkfile/Makefile tests/zfs-tests/cmd/mkfiles/Makefile tests/zfs-tests/cmd/mktree/Makefile tests/zfs-tests/cmd/mmap_exec/Makefile tests/zfs-tests/cmd/mmap_libaio/Makefile + tests/zfs-tests/cmd/mmap_seek/Makefile tests/zfs-tests/cmd/mmapwrite/Makefile tests/zfs-tests/cmd/nvlist_to_lua/Makefile tests/zfs-tests/cmd/randfree_file/Makefile tests/zfs-tests/cmd/randwritecomp/Makefile tests/zfs-tests/cmd/readmmap/Makefile tests/zfs-tests/cmd/rename_dir/Makefile tests/zfs-tests/cmd/rm_lnkcnt_zero_file/Makefile tests/zfs-tests/cmd/send_doall/Makefile tests/zfs-tests/cmd/stride_dd/Makefile tests/zfs-tests/cmd/threadsappend/Makefile tests/zfs-tests/cmd/user_ns_exec/Makefile tests/zfs-tests/cmd/xattrtest/Makefile tests/zfs-tests/include/Makefile tests/zfs-tests/tests/Makefile tests/zfs-tests/tests/functional/Makefile tests/zfs-tests/tests/functional/acl/Makefile tests/zfs-tests/tests/functional/acl/off/Makefile tests/zfs-tests/tests/functional/acl/posix/Makefile tests/zfs-tests/tests/functional/acl/posix-sa/Makefile tests/zfs-tests/tests/functional/alloc_class/Makefile tests/zfs-tests/tests/functional/arc/Makefile tests/zfs-tests/tests/functional/atime/Makefile tests/zfs-tests/tests/functional/bootfs/Makefile tests/zfs-tests/tests/functional/btree/Makefile tests/zfs-tests/tests/functional/cache/Makefile tests/zfs-tests/tests/functional/cachefile/Makefile tests/zfs-tests/tests/functional/casenorm/Makefile tests/zfs-tests/tests/functional/channel_program/Makefile tests/zfs-tests/tests/functional/channel_program/lua_core/Makefile tests/zfs-tests/tests/functional/channel_program/synctask_core/Makefile tests/zfs-tests/tests/functional/chattr/Makefile tests/zfs-tests/tests/functional/checksum/Makefile tests/zfs-tests/tests/functional/clean_mirror/Makefile tests/zfs-tests/tests/functional/cli_root/Makefile tests/zfs-tests/tests/functional/cli_root/zdb/Makefile tests/zfs-tests/tests/functional/cli_root/zfs/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_bookmark/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_change-key/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_clone/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_copies/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_create/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_destroy/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_diff/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_get/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_ids_to_path/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_inherit/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_jail/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_load-key/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_mount/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_program/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_promote/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_property/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_receive/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_rename/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_reservation/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_rollback/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_send/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_set/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_share/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_snapshot/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_sysfs/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_unload-key/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_unmount/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_unshare/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_upgrade/Makefile tests/zfs-tests/tests/functional/cli_root/zfs_wait/Makefile tests/zfs-tests/tests/functional/cli_root/zpool/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_add/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_attach/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_clear/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_create/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_destroy/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_detach/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_events/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_expand/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_export/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_get/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_history/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_import/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_import/blockfiles/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_initialize/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_labelclear/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_offline/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_online/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_remove/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_reopen/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_replace/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_resilver/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_scrub/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_set/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_split/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_status/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_sync/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_trim/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_upgrade/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_upgrade/blockfiles/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_wait/Makefile tests/zfs-tests/tests/functional/cli_root/zpool_wait/scan/Makefile tests/zfs-tests/tests/functional/cli_user/Makefile tests/zfs-tests/tests/functional/cli_user/misc/Makefile tests/zfs-tests/tests/functional/cli_user/zfs_list/Makefile tests/zfs-tests/tests/functional/cli_user/zpool_iostat/Makefile tests/zfs-tests/tests/functional/cli_user/zpool_list/Makefile tests/zfs-tests/tests/functional/cli_user/zpool_status/Makefile tests/zfs-tests/tests/functional/compression/Makefile tests/zfs-tests/tests/functional/cp_files/Makefile tests/zfs-tests/tests/functional/crtime/Makefile tests/zfs-tests/tests/functional/ctime/Makefile tests/zfs-tests/tests/functional/deadman/Makefile tests/zfs-tests/tests/functional/delegate/Makefile tests/zfs-tests/tests/functional/devices/Makefile tests/zfs-tests/tests/functional/events/Makefile tests/zfs-tests/tests/functional/exec/Makefile tests/zfs-tests/tests/functional/fallocate/Makefile tests/zfs-tests/tests/functional/fault/Makefile tests/zfs-tests/tests/functional/features/Makefile tests/zfs-tests/tests/functional/features/async_destroy/Makefile tests/zfs-tests/tests/functional/features/large_dnode/Makefile tests/zfs-tests/tests/functional/grow/Makefile tests/zfs-tests/tests/functional/history/Makefile tests/zfs-tests/tests/functional/hkdf/Makefile tests/zfs-tests/tests/functional/inheritance/Makefile tests/zfs-tests/tests/functional/inuse/Makefile tests/zfs-tests/tests/functional/io/Makefile tests/zfs-tests/tests/functional/l2arc/Makefile tests/zfs-tests/tests/functional/large_files/Makefile tests/zfs-tests/tests/functional/largest_pool/Makefile tests/zfs-tests/tests/functional/libzfs/Makefile tests/zfs-tests/tests/functional/limits/Makefile tests/zfs-tests/tests/functional/link_count/Makefile tests/zfs-tests/tests/functional/log_spacemap/Makefile tests/zfs-tests/tests/functional/migration/Makefile tests/zfs-tests/tests/functional/mmap/Makefile tests/zfs-tests/tests/functional/mmp/Makefile tests/zfs-tests/tests/functional/mount/Makefile tests/zfs-tests/tests/functional/mv_files/Makefile tests/zfs-tests/tests/functional/nestedfs/Makefile tests/zfs-tests/tests/functional/no_space/Makefile tests/zfs-tests/tests/functional/nopwrite/Makefile tests/zfs-tests/tests/functional/online_offline/Makefile tests/zfs-tests/tests/functional/pam/Makefile tests/zfs-tests/tests/functional/pool_checkpoint/Makefile tests/zfs-tests/tests/functional/pool_names/Makefile tests/zfs-tests/tests/functional/poolversion/Makefile tests/zfs-tests/tests/functional/privilege/Makefile tests/zfs-tests/tests/functional/procfs/Makefile tests/zfs-tests/tests/functional/projectquota/Makefile tests/zfs-tests/tests/functional/pyzfs/Makefile tests/zfs-tests/tests/functional/quota/Makefile tests/zfs-tests/tests/functional/raidz/Makefile tests/zfs-tests/tests/functional/redacted_send/Makefile tests/zfs-tests/tests/functional/redundancy/Makefile tests/zfs-tests/tests/functional/refquota/Makefile tests/zfs-tests/tests/functional/refreserv/Makefile tests/zfs-tests/tests/functional/removal/Makefile tests/zfs-tests/tests/functional/rename_dirs/Makefile tests/zfs-tests/tests/functional/replacement/Makefile tests/zfs-tests/tests/functional/reservation/Makefile tests/zfs-tests/tests/functional/rootpool/Makefile tests/zfs-tests/tests/functional/rsend/Makefile tests/zfs-tests/tests/functional/scrub_mirror/Makefile tests/zfs-tests/tests/functional/slog/Makefile tests/zfs-tests/tests/functional/snapshot/Makefile tests/zfs-tests/tests/functional/snapused/Makefile tests/zfs-tests/tests/functional/sparse/Makefile tests/zfs-tests/tests/functional/suid/Makefile tests/zfs-tests/tests/functional/threadsappend/Makefile tests/zfs-tests/tests/functional/tmpfile/Makefile tests/zfs-tests/tests/functional/trim/Makefile tests/zfs-tests/tests/functional/truncate/Makefile tests/zfs-tests/tests/functional/upgrade/Makefile tests/zfs-tests/tests/functional/user_namespace/Makefile tests/zfs-tests/tests/functional/userquota/Makefile tests/zfs-tests/tests/functional/vdev_zaps/Makefile tests/zfs-tests/tests/functional/write_dirs/Makefile tests/zfs-tests/tests/functional/xattr/Makefile tests/zfs-tests/tests/functional/zpool_influxdb/Makefile tests/zfs-tests/tests/functional/zvol/Makefile tests/zfs-tests/tests/functional/zvol/zvol_ENOSPC/Makefile tests/zfs-tests/tests/functional/zvol/zvol_cli/Makefile tests/zfs-tests/tests/functional/zvol/zvol_misc/Makefile tests/zfs-tests/tests/functional/zvol/zvol_swap/Makefile tests/zfs-tests/tests/perf/Makefile tests/zfs-tests/tests/perf/fio/Makefile tests/zfs-tests/tests/perf/regression/Makefile tests/zfs-tests/tests/perf/scripts/Makefile tests/zfs-tests/tests/stress/Makefile udev/Makefile udev/rules.d/Makefile zfs.release ]) AC_OUTPUT diff --git a/include/os/freebsd/spl/sys/vnode.h b/include/os/freebsd/spl/sys/vnode.h index 3670712a0456..3bc8a18eeb72 100644 --- a/include/os/freebsd/spl/sys/vnode.h +++ b/include/os/freebsd/spl/sys/vnode.h @@ -1,208 +1,226 @@ /* * Copyright (c) 2007 Pawel Jakub Dawidek * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _OPENSOLARIS_SYS_VNODE_H_ #define _OPENSOLARIS_SYS_VNODE_H_ struct vnode; struct vattr; struct xucred; typedef struct flock flock64_t; typedef struct vnode vnode_t; typedef struct vattr vattr_t; typedef enum vtype vtype_t; #include #include #include_next #include enum symfollow { NO_FOLLOW = NOFOLLOW }; #define NOCRED ((struct ucred *)0) /* no credential available */ #define F_FREESP 11 /* Free file space */ #include #include #ifndef IN_BASE #include_next #endif #include #include #include #include #include #include #include +#include +#include typedef struct vop_vector vnodeops_t; #define VOP_FID VOP_VPTOFH #define vop_fid vop_vptofh #define vop_fid_args vop_vptofh_args #define a_fid a_fhp #define rootvfs (rootvnode == NULL ? NULL : rootvnode->v_mount) #ifndef IN_BASE static __inline int vn_is_readonly(vnode_t *vp) { return (vp->v_mount->mnt_flag & MNT_RDONLY); } #endif #define vn_vfswlock(vp) (0) #define vn_vfsunlock(vp) do { } while (0) #define vn_ismntpt(vp) \ ((vp)->v_type == VDIR && (vp)->v_mountedhere != NULL) #define vn_mountedvfs(vp) ((vp)->v_mountedhere) #define vn_has_cached_data(vp) \ ((vp)->v_object != NULL && \ (vp)->v_object->resident_page_count > 0) + +static __inline void +vn_flush_cached_data(vnode_t *vp, boolean_t sync) +{ +#if __FreeBSD_version > 1300054 + if (vm_object_mightbedirty(vp->v_object)) { +#else + if (vp->v_object->flags & OBJ_MIGHTBEDIRTY) { +#endif + int flags = sync ? OBJPC_SYNC : 0; + zfs_vmobject_wlock(vp->v_object); + vm_object_page_clean(vp->v_object, 0, 0, flags); + zfs_vmobject_wunlock(vp->v_object); + } +} + #define vn_exists(vp) do { } while (0) #define vn_invalid(vp) do { } while (0) #define vn_renamepath(tdvp, svp, tnm, lentnm) do { } while (0) #define vn_free(vp) do { } while (0) #define vn_matchops(vp, vops) ((vp)->v_op == &(vops)) #define VN_HOLD(v) vref(v) #define VN_RELE(v) vrele(v) #define VN_URELE(v) vput(v) #define vnevent_create(vp, ct) do { } while (0) #define vnevent_link(vp, ct) do { } while (0) #define vnevent_remove(vp, dvp, name, ct) do { } while (0) #define vnevent_rmdir(vp, dvp, name, ct) do { } while (0) #define vnevent_rename_src(vp, dvp, name, ct) do { } while (0) #define vnevent_rename_dest(vp, dvp, name, ct) do { } while (0) #define vnevent_rename_dest_dir(vp, ct) do { } while (0) #define specvp(vp, rdev, type, cr) (VN_HOLD(vp), (vp)) #define MANDLOCK(vp, mode) (0) /* * We will use va_spare is place of Solaris' va_mask. * This field is initialized in zfs_setattr(). */ #define va_mask va_spare /* TODO: va_fileid is shorter than va_nodeid !!! */ #define va_nodeid va_fileid /* TODO: This field needs conversion! */ #define va_nblocks va_bytes #define va_blksize va_blocksize #define va_seq va_gen #define MAXOFFSET_T OFF_MAX #define EXCL 0 #define FCREAT O_CREAT #define FTRUNC O_TRUNC #define FEXCL O_EXCL #ifndef FDSYNC #define FDSYNC FFSYNC #endif #define FRSYNC FFSYNC #define FSYNC FFSYNC #define FOFFMAX 0x00 #define FIGNORECASE 0x00 /* * Attributes of interest to the caller of setattr or getattr. */ #define AT_MODE 0x00002 #define AT_UID 0x00004 #define AT_GID 0x00008 #define AT_FSID 0x00010 #define AT_NODEID 0x00020 #define AT_NLINK 0x00040 #define AT_SIZE 0x00080 #define AT_ATIME 0x00100 #define AT_MTIME 0x00200 #define AT_CTIME 0x00400 #define AT_RDEV 0x00800 #define AT_BLKSIZE 0x01000 #define AT_NBLOCKS 0x02000 /* 0x04000 */ /* unused */ #define AT_SEQ 0x08000 /* * If AT_XVATTR is set then there are additional bits to process in * the xvattr_t's attribute bitmap. If this is not set then the bitmap * MUST be ignored. Note that this bit must be set/cleared explicitly. * That is, setting AT_ALL will NOT set AT_XVATTR. */ #define AT_XVATTR 0x10000 #define AT_ALL (AT_MODE|AT_UID|AT_GID|AT_FSID|AT_NODEID|\ AT_NLINK|AT_SIZE|AT_ATIME|AT_MTIME|AT_CTIME|\ AT_RDEV|AT_BLKSIZE|AT_NBLOCKS|AT_SEQ) #define AT_STAT (AT_MODE|AT_UID|AT_GID|AT_FSID|AT_NODEID|AT_NLINK|\ AT_SIZE|AT_ATIME|AT_MTIME|AT_CTIME|AT_RDEV) #define AT_TIMES (AT_ATIME|AT_MTIME|AT_CTIME) #define AT_NOSET (AT_NLINK|AT_RDEV|AT_FSID|AT_NODEID|\ AT_BLKSIZE|AT_NBLOCKS|AT_SEQ) #ifndef IN_BASE static __inline void vattr_init_mask(vattr_t *vap) { vap->va_mask = 0; if (vap->va_uid != (uid_t)VNOVAL) vap->va_mask |= AT_UID; if (vap->va_gid != (gid_t)VNOVAL) vap->va_mask |= AT_GID; if (vap->va_size != (u_quad_t)VNOVAL) vap->va_mask |= AT_SIZE; if (vap->va_atime.tv_sec != VNOVAL) vap->va_mask |= AT_ATIME; if (vap->va_mtime.tv_sec != VNOVAL) vap->va_mask |= AT_MTIME; if (vap->va_mode != (uint16_t)VNOVAL) vap->va_mask |= AT_MODE; if (vap->va_flags != VNOVAL) vap->va_mask |= AT_XVATTR; } #endif #define RLIM64_INFINITY 0 static __inline int vn_rename(char *from, char *to, enum uio_seg seg) { ASSERT(seg == UIO_SYSSPACE); return (kern_renameat(curthread, AT_FDCWD, from, AT_FDCWD, to, seg)); } #include #endif /* _OPENSOLARIS_SYS_VNODE_H_ */ diff --git a/include/os/freebsd/zfs/sys/zfs_znode_impl.h b/include/os/freebsd/zfs/sys/zfs_znode_impl.h index e90008c70a87..edb28d041a0c 100644 --- a/include/os/freebsd/zfs/sys/zfs_znode_impl.h +++ b/include/os/freebsd/zfs/sys/zfs_znode_impl.h @@ -1,188 +1,189 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2015 by Delphix. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2016 Nexenta Systems, Inc. All rights reserved. */ #ifndef _FREEBSD_ZFS_SYS_ZNODE_IMPL_H #define _FREEBSD_ZFS_SYS_ZNODE_IMPL_H #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * Directory entry locks control access to directory entries. * They are used to protect creates, deletes, and renames. * Each directory znode has a mutex and a list of locked names. */ #define ZNODE_OS_FIELDS \ struct zfsvfs *z_zfsvfs; \ vnode_t *z_vnode; \ char *z_cached_symlink; \ uint64_t z_uid; \ uint64_t z_gid; \ uint64_t z_gen; \ uint64_t z_atime[2]; \ uint64_t z_links; #define ZFS_LINK_MAX UINT64_MAX /* * ZFS minor numbers can refer to either a control device instance or * a zvol. Depending on the value of zss_type, zss_data points to either * a zvol_state_t or a zfs_onexit_t. */ enum zfs_soft_state_type { ZSST_ZVOL, ZSST_CTLDEV }; typedef struct zfs_soft_state { enum zfs_soft_state_type zss_type; void *zss_data; } zfs_soft_state_t; extern minor_t zfsdev_minor_alloc(void); /* * Range locking rules * -------------------- * 1. When truncating a file (zfs_create, zfs_setattr, zfs_space) the whole * file range needs to be locked as RL_WRITER. Only then can the pages be * freed etc and zp_size reset. zp_size must be set within range lock. * 2. For writes and punching holes (zfs_write & zfs_space) just the range * being written or freed needs to be locked as RL_WRITER. * Multiple writes at the end of the file must coordinate zp_size updates * to ensure data isn't lost. A compare and swap loop is currently used * to ensure the file size is at least the offset last written. * 3. For reads (zfs_read, zfs_get_data & zfs_putapage) just the range being * read needs to be locked as RL_READER. A check against zp_size can then * be made for reading beyond end of file. */ /* * Convert between znode pointers and vnode pointers */ #define ZTOV(ZP) ((ZP)->z_vnode) #define ZTOI(ZP) ((ZP)->z_vnode) #define VTOZ(VP) ((struct znode *)(VP)->v_data) #define VTOZ_SMR(VP) ((znode_t *)vn_load_v_data_smr(VP)) #define ITOZ(VP) ((struct znode *)(VP)->v_data) #define zhold(zp) vhold(ZTOV((zp))) #define zrele(zp) vrele(ZTOV((zp))) #define ZTOZSB(zp) ((zp)->z_zfsvfs) #define ITOZSB(vp) (VTOZ(vp)->z_zfsvfs) #define ZTOTYPE(zp) (ZTOV(zp)->v_type) #define ZTOGID(zp) ((zp)->z_gid) #define ZTOUID(zp) ((zp)->z_uid) #define ZTONLNK(zp) ((zp)->z_links) #define Z_ISBLK(type) ((type) == VBLK) #define Z_ISCHR(type) ((type) == VCHR) #define Z_ISLNK(type) ((type) == VLNK) #define Z_ISDIR(type) ((type) == VDIR) -#define zn_has_cached_data(zp) vn_has_cached_data(ZTOV(zp)) +#define zn_has_cached_data(zp) vn_has_cached_data(ZTOV(zp)) +#define zn_flush_cached_data(zp, sync) vn_flush_cached_data(ZTOV(zp), sync) #define zn_rlimit_fsize(zp, uio) \ vn_rlimit_fsize(ZTOV(zp), GET_UIO_STRUCT(uio), zfs_uio_td(uio)) /* Called on entry to each ZFS vnode and vfs operation */ #define ZFS_ENTER(zfsvfs) \ { \ ZFS_TEARDOWN_ENTER_READ((zfsvfs), FTAG); \ if (__predict_false((zfsvfs)->z_unmounted)) { \ ZFS_TEARDOWN_EXIT_READ(zfsvfs, FTAG); \ return (EIO); \ } \ } /* Must be called before exiting the vop */ #define ZFS_EXIT(zfsvfs) ZFS_TEARDOWN_EXIT_READ(zfsvfs, FTAG) /* Verifies the znode is valid */ #define ZFS_VERIFY_ZP(zp) \ if (__predict_false((zp)->z_sa_hdl == NULL)) { \ ZFS_EXIT((zp)->z_zfsvfs); \ return (EIO); \ } \ /* * Macros for dealing with dmu_buf_hold */ #define ZFS_OBJ_HASH(obj_num) ((obj_num) & (ZFS_OBJ_MTX_SZ - 1)) #define ZFS_OBJ_MUTEX(zfsvfs, obj_num) \ (&(zfsvfs)->z_hold_mtx[ZFS_OBJ_HASH(obj_num)]) #define ZFS_OBJ_HOLD_ENTER(zfsvfs, obj_num) \ mutex_enter(ZFS_OBJ_MUTEX((zfsvfs), (obj_num))) #define ZFS_OBJ_HOLD_TRYENTER(zfsvfs, obj_num) \ mutex_tryenter(ZFS_OBJ_MUTEX((zfsvfs), (obj_num))) #define ZFS_OBJ_HOLD_EXIT(zfsvfs, obj_num) \ mutex_exit(ZFS_OBJ_MUTEX((zfsvfs), (obj_num))) /* Encode ZFS stored time values from a struct timespec */ #define ZFS_TIME_ENCODE(tp, stmp) \ { \ (stmp)[0] = (uint64_t)(tp)->tv_sec; \ (stmp)[1] = (uint64_t)(tp)->tv_nsec; \ } /* Decode ZFS stored time values to a struct timespec */ #define ZFS_TIME_DECODE(tp, stmp) \ { \ (tp)->tv_sec = (time_t)(stmp)[0]; \ (tp)->tv_nsec = (long)(stmp)[1]; \ } #define ZFS_ACCESSTIME_STAMP(zfsvfs, zp) \ if ((zfsvfs)->z_atime && !((zfsvfs)->z_vfs->vfs_flag & VFS_RDONLY)) \ zfs_tstamp_update_setup_ext(zp, ACCESSED, NULL, NULL, B_FALSE); extern void zfs_tstamp_update_setup_ext(struct znode *, uint_t, uint64_t [2], uint64_t [2], boolean_t have_tx); extern void zfs_znode_free(struct znode *); extern zil_replay_func_t *zfs_replay_vector[TX_MAX_TYPE]; extern int zfsfstype; extern int zfs_znode_parent_and_name(struct znode *zp, struct znode **dzpp, char *buf); #ifdef __cplusplus } #endif #endif /* _FREEBSD_SYS_FS_ZFS_ZNODE_H */ diff --git a/include/os/linux/zfs/sys/zfs_znode_impl.h b/include/os/linux/zfs/sys/zfs_znode_impl.h index 0a6273442b71..de46fc8f2bd8 100644 --- a/include/os/linux/zfs/sys/zfs_znode_impl.h +++ b/include/os/linux/zfs/sys/zfs_znode_impl.h @@ -1,182 +1,183 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright 2016 Nexenta Systems, Inc. All rights reserved. */ #ifndef _SYS_ZFS_ZNODE_IMPL_H #define _SYS_ZFS_ZNODE_IMPL_H #ifndef _KERNEL #error "no user serviceable parts within" #endif #include #include #include #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif #define ZNODE_OS_FIELDS \ inode_timespec_t z_btime; /* creation/birth time (cached) */ \ struct inode z_inode; /* * Convert between znode pointers and inode pointers */ #define ZTOI(znode) (&((znode)->z_inode)) #define ITOZ(inode) (container_of((inode), znode_t, z_inode)) #define ZTOZSB(znode) ((zfsvfs_t *)(ZTOI(znode)->i_sb->s_fs_info)) #define ITOZSB(inode) ((zfsvfs_t *)((inode)->i_sb->s_fs_info)) #define ZTOTYPE(zp) (ZTOI(zp)->i_mode) #define ZTOGID(zp) (ZTOI(zp)->i_gid) #define ZTOUID(zp) (ZTOI(zp)->i_uid) #define ZTONLNK(zp) (ZTOI(zp)->i_nlink) #define Z_ISBLK(type) S_ISBLK(type) #define Z_ISCHR(type) S_ISCHR(type) #define Z_ISLNK(type) S_ISLNK(type) #define Z_ISDEV(type) (S_ISCHR(type) || S_ISBLK(type) || S_ISFIFO(type)) #define Z_ISDIR(type) S_ISDIR(type) #define zn_has_cached_data(zp) ((zp)->z_is_mapped) +#define zn_flush_cached_data(zp, sync) write_inode_now(ZTOI(zp), sync) #define zn_rlimit_fsize(zp, uio) (0) /* * zhold() wraps igrab() on Linux, and igrab() may fail when the * inode is in the process of being deleted. As zhold() must only be * called when a ref already exists - so the inode cannot be * mid-deletion - we VERIFY() this. */ #define zhold(zp) VERIFY3P(igrab(ZTOI((zp))), !=, NULL) #define zrele(zp) iput(ZTOI((zp))) /* Called on entry to each ZFS inode and vfs operation. */ #define ZFS_ENTER_ERROR(zfsvfs, error) \ do { \ ZFS_TEARDOWN_ENTER_READ(zfsvfs, FTAG); \ if (unlikely((zfsvfs)->z_unmounted)) { \ ZFS_TEARDOWN_EXIT_READ(zfsvfs, FTAG); \ return (error); \ } \ } while (0) #define ZFS_ENTER(zfsvfs) ZFS_ENTER_ERROR(zfsvfs, EIO) #define ZPL_ENTER(zfsvfs) ZFS_ENTER_ERROR(zfsvfs, -EIO) /* Must be called before exiting the operation. */ #define ZFS_EXIT(zfsvfs) \ do { \ zfs_exit_fs(zfsvfs); \ ZFS_TEARDOWN_EXIT_READ(zfsvfs, FTAG); \ } while (0) #define ZPL_EXIT(zfsvfs) \ do { \ rrm_exit(&(zfsvfs)->z_teardown_lock, FTAG); \ } while (0) /* Verifies the znode is valid. */ #define ZFS_VERIFY_ZP_ERROR(zp, error) \ do { \ if (unlikely((zp)->z_sa_hdl == NULL)) { \ ZFS_EXIT(ZTOZSB(zp)); \ return (error); \ } \ } while (0) #define ZFS_VERIFY_ZP(zp) ZFS_VERIFY_ZP_ERROR(zp, EIO) #define ZPL_VERIFY_ZP(zp) ZFS_VERIFY_ZP_ERROR(zp, -EIO) /* * Macros for dealing with dmu_buf_hold */ #define ZFS_OBJ_MTX_SZ 64 #define ZFS_OBJ_MTX_MAX (1024 * 1024) #define ZFS_OBJ_HASH(zfsvfs, obj) ((obj) & ((zfsvfs->z_hold_size) - 1)) extern unsigned int zfs_object_mutex_size; /* * Encode ZFS stored time values from a struct timespec / struct timespec64. */ #define ZFS_TIME_ENCODE(tp, stmp) \ do { \ (stmp)[0] = (uint64_t)(tp)->tv_sec; \ (stmp)[1] = (uint64_t)(tp)->tv_nsec; \ } while (0) #if defined(HAVE_INODE_TIMESPEC64_TIMES) /* * Decode ZFS stored time values to a struct timespec64 * 4.18 and newer kernels. */ #define ZFS_TIME_DECODE(tp, stmp) \ do { \ (tp)->tv_sec = (time64_t)(stmp)[0]; \ (tp)->tv_nsec = (long)(stmp)[1]; \ } while (0) #else /* * Decode ZFS stored time values to a struct timespec * 4.17 and older kernels. */ #define ZFS_TIME_DECODE(tp, stmp) \ do { \ (tp)->tv_sec = (time_t)(stmp)[0]; \ (tp)->tv_nsec = (long)(stmp)[1]; \ } while (0) #endif /* HAVE_INODE_TIMESPEC64_TIMES */ #define ZFS_ACCESSTIME_STAMP(zfsvfs, zp) struct znode; extern int zfs_sync(struct super_block *, int, cred_t *); extern int zfs_inode_alloc(struct super_block *, struct inode **ip); extern void zfs_inode_destroy(struct inode *); extern void zfs_mark_inode_dirty(struct inode *); extern boolean_t zfs_relatime_need_update(const struct inode *); #if defined(HAVE_UIO_RW) extern caddr_t zfs_map_page(page_t *, enum seg_rw); extern void zfs_unmap_page(page_t *, caddr_t); #endif /* HAVE_UIO_RW */ extern zil_replay_func_t *zfs_replay_vector[TX_MAX_TYPE]; extern int zfsfstype; #ifdef __cplusplus } #endif #endif /* _SYS_ZFS_ZNODE_IMPL_H */ diff --git a/include/sys/dnode.h b/include/sys/dnode.h index 2cdc5b8798ad..af8775b9ee00 100644 --- a/include/sys/dnode.h +++ b/include/sys/dnode.h @@ -1,627 +1,628 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. */ #ifndef _SYS_DNODE_H #define _SYS_DNODE_H #include #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * dnode_hold() flags. */ #define DNODE_MUST_BE_ALLOCATED 1 #define DNODE_MUST_BE_FREE 2 #define DNODE_DRY_RUN 4 /* * dnode_next_offset() flags. */ #define DNODE_FIND_HOLE 1 #define DNODE_FIND_BACKWARDS 2 #define DNODE_FIND_HAVELOCK 4 /* * Fixed constants. */ #define DNODE_SHIFT 9 /* 512 bytes */ #define DN_MIN_INDBLKSHIFT 12 /* 4k */ /* * If we ever increase this value beyond 20, we need to revisit all logic that * does x << level * ebps to handle overflow. With a 1M indirect block size, * 4 levels of indirect blocks would not be able to guarantee addressing an * entire object, so 5 levels will be used, but 5 * (20 - 7) = 65. */ #define DN_MAX_INDBLKSHIFT 17 /* 128k */ #define DNODE_BLOCK_SHIFT 14 /* 16k */ #define DNODE_CORE_SIZE 64 /* 64 bytes for dnode sans blkptrs */ #define DN_MAX_OBJECT_SHIFT 48 /* 256 trillion (zfs_fid_t limit) */ #define DN_MAX_OFFSET_SHIFT 64 /* 2^64 bytes in a dnode */ /* * dnode id flags * * Note: a file will never ever have its ids moved from bonus->spill */ #define DN_ID_CHKED_BONUS 0x1 #define DN_ID_CHKED_SPILL 0x2 #define DN_ID_OLD_EXIST 0x4 #define DN_ID_NEW_EXIST 0x8 /* * Derived constants. */ #define DNODE_MIN_SIZE (1 << DNODE_SHIFT) #define DNODE_MAX_SIZE (1 << DNODE_BLOCK_SHIFT) #define DNODE_BLOCK_SIZE (1 << DNODE_BLOCK_SHIFT) #define DNODE_MIN_SLOTS (DNODE_MIN_SIZE >> DNODE_SHIFT) #define DNODE_MAX_SLOTS (DNODE_MAX_SIZE >> DNODE_SHIFT) #define DN_BONUS_SIZE(dnsize) ((dnsize) - DNODE_CORE_SIZE - \ (1 << SPA_BLKPTRSHIFT)) #define DN_SLOTS_TO_BONUSLEN(slots) DN_BONUS_SIZE((slots) << DNODE_SHIFT) #define DN_OLD_MAX_BONUSLEN (DN_BONUS_SIZE(DNODE_MIN_SIZE)) #define DN_MAX_NBLKPTR ((DNODE_MIN_SIZE - DNODE_CORE_SIZE) >> SPA_BLKPTRSHIFT) #define DN_MAX_OBJECT (1ULL << DN_MAX_OBJECT_SHIFT) #define DN_ZERO_BONUSLEN (DN_BONUS_SIZE(DNODE_MAX_SIZE) + 1) #define DN_KILL_SPILLBLK (1) #define DN_SLOT_UNINIT ((void *)NULL) /* Uninitialized */ #define DN_SLOT_FREE ((void *)1UL) /* Free slot */ #define DN_SLOT_ALLOCATED ((void *)2UL) /* Allocated slot */ #define DN_SLOT_INTERIOR ((void *)3UL) /* Interior allocated slot */ #define DN_SLOT_IS_PTR(dn) ((void *)dn > DN_SLOT_INTERIOR) #define DN_SLOT_IS_VALID(dn) ((void *)dn != NULL) #define DNODES_PER_BLOCK_SHIFT (DNODE_BLOCK_SHIFT - DNODE_SHIFT) #define DNODES_PER_BLOCK (1ULL << DNODES_PER_BLOCK_SHIFT) /* * This is inaccurate if the indblkshift of the particular object is not the * max. But it's only used by userland to calculate the zvol reservation. */ #define DNODES_PER_LEVEL_SHIFT (DN_MAX_INDBLKSHIFT - SPA_BLKPTRSHIFT) #define DNODES_PER_LEVEL (1ULL << DNODES_PER_LEVEL_SHIFT) #define DN_MAX_LEVELS (DIV_ROUND_UP(DN_MAX_OFFSET_SHIFT - SPA_MINBLOCKSHIFT, \ DN_MIN_INDBLKSHIFT - SPA_BLKPTRSHIFT) + 1) #define DN_BONUS(dnp) ((void*)((dnp)->dn_bonus + \ (((dnp)->dn_nblkptr - 1) * sizeof (blkptr_t)))) #define DN_MAX_BONUS_LEN(dnp) \ ((dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) ? \ (uint8_t *)DN_SPILL_BLKPTR(dnp) - (uint8_t *)DN_BONUS(dnp) : \ (uint8_t *)(dnp + (dnp->dn_extra_slots + 1)) - (uint8_t *)DN_BONUS(dnp)) #define DN_USED_BYTES(dnp) (((dnp)->dn_flags & DNODE_FLAG_USED_BYTES) ? \ (dnp)->dn_used : (dnp)->dn_used << SPA_MINBLOCKSHIFT) #define EPB(blkshift, typeshift) (1 << (blkshift - typeshift)) struct dmu_buf_impl; struct objset; struct zio; enum dnode_dirtycontext { DN_UNDIRTIED, DN_DIRTY_OPEN, DN_DIRTY_SYNC }; /* Is dn_used in bytes? if not, it's in multiples of SPA_MINBLOCKSIZE */ #define DNODE_FLAG_USED_BYTES (1 << 0) #define DNODE_FLAG_USERUSED_ACCOUNTED (1 << 1) /* Does dnode have a SA spill blkptr in bonus? */ #define DNODE_FLAG_SPILL_BLKPTR (1 << 2) /* User/Group/Project dnode accounting */ #define DNODE_FLAG_USEROBJUSED_ACCOUNTED (1 << 3) /* * This mask defines the set of flags which are "portable", meaning * that they can be preserved when doing a raw encrypted zfs send. * Flags included in this mask will be protected by AAD when the block * of dnodes is encrypted. */ #define DNODE_CRYPT_PORTABLE_FLAGS_MASK (DNODE_FLAG_SPILL_BLKPTR) /* * VARIABLE-LENGTH (LARGE) DNODES * * The motivation for variable-length dnodes is to eliminate the overhead * associated with using spill blocks. Spill blocks are used to store * system attribute data (i.e. file metadata) that does not fit in the * dnode's bonus buffer. By allowing a larger bonus buffer area the use of * a spill block can be avoided. Spill blocks potentially incur an * additional read I/O for every dnode in a dnode block. As a worst case * example, reading 32 dnodes from a 16k dnode block and all of the spill * blocks could issue 33 separate reads. Now suppose those dnodes have size * 1024 and therefore don't need spill blocks. Then the worst case number * of blocks read is reduced from 33 to two--one per dnode block. * * ZFS-on-Linux systems that make heavy use of extended attributes benefit * from this feature. In particular, ZFS-on-Linux supports the xattr=sa * dataset property which allows file extended attribute data to be stored * in the dnode bonus buffer as an alternative to the traditional * directory-based format. Workloads such as SELinux and the Lustre * distributed filesystem often store enough xattr data to force spill * blocks when xattr=sa is in effect. Large dnodes may therefore provide a * performance benefit to such systems. Other use cases that benefit from * this feature include files with large ACLs and symbolic links with long * target names. * * The size of a dnode may be a multiple of 512 bytes up to the size of a * dnode block (currently 16384 bytes). The dn_extra_slots field of the * on-disk dnode_phys_t structure describes the size of the physical dnode * on disk. The field represents how many "extra" dnode_phys_t slots a * dnode consumes in its dnode block. This convention results in a value of * 0 for 512 byte dnodes which preserves on-disk format compatibility with * older software which doesn't support large dnodes. * * Similarly, the in-memory dnode_t structure has a dn_num_slots field * to represent the total number of dnode_phys_t slots consumed on disk. * Thus dn->dn_num_slots is 1 greater than the corresponding * dnp->dn_extra_slots. This difference in convention was adopted * because, unlike on-disk structures, backward compatibility is not a * concern for in-memory objects, so we used a more natural way to * represent size for a dnode_t. * * The default size for newly created dnodes is determined by the value of * the "dnodesize" dataset property. By default the property is set to * "legacy" which is compatible with older software. Setting the property * to "auto" will allow the filesystem to choose the most suitable dnode * size. Currently this just sets the default dnode size to 1k, but future * code improvements could dynamically choose a size based on observed * workload patterns. Dnodes of varying sizes can coexist within the same * dataset and even within the same dnode block. */ typedef struct dnode_phys { uint8_t dn_type; /* dmu_object_type_t */ uint8_t dn_indblkshift; /* ln2(indirect block size) */ uint8_t dn_nlevels; /* 1=dn_blkptr->data blocks */ uint8_t dn_nblkptr; /* length of dn_blkptr */ uint8_t dn_bonustype; /* type of data in bonus buffer */ uint8_t dn_checksum; /* ZIO_CHECKSUM type */ uint8_t dn_compress; /* ZIO_COMPRESS type */ uint8_t dn_flags; /* DNODE_FLAG_* */ uint16_t dn_datablkszsec; /* data block size in 512b sectors */ uint16_t dn_bonuslen; /* length of dn_bonus */ uint8_t dn_extra_slots; /* # of subsequent slots consumed */ uint8_t dn_pad2[3]; /* accounting is protected by dn_dirty_mtx */ uint64_t dn_maxblkid; /* largest allocated block ID */ uint64_t dn_used; /* bytes (or sectors) of disk space */ /* * Both dn_pad2 and dn_pad3 are protected by the block's MAC. This * allows us to protect any fields that might be added here in the * future. In either case, developers will want to check * zio_crypt_init_uios_dnode() and zio_crypt_do_dnode_hmac_updates() * to ensure the new field is being protected and updated properly. */ uint64_t dn_pad3[4]; /* * The tail region is 448 bytes for a 512 byte dnode, and * correspondingly larger for larger dnode sizes. The spill * block pointer, when present, is always at the end of the tail * region. There are three ways this space may be used, using * a 512 byte dnode for this diagram: * * 0 64 128 192 256 320 384 448 (offset) * +---------------+---------------+---------------+-------+ * | dn_blkptr[0] | dn_blkptr[1] | dn_blkptr[2] | / | * +---------------+---------------+---------------+-------+ * | dn_blkptr[0] | dn_bonus[0..319] | * +---------------+-----------------------+---------------+ * | dn_blkptr[0] | dn_bonus[0..191] | dn_spill | * +---------------+-----------------------+---------------+ */ union { blkptr_t dn_blkptr[1+DN_OLD_MAX_BONUSLEN/sizeof (blkptr_t)]; struct { blkptr_t __dn_ignore1; uint8_t dn_bonus[DN_OLD_MAX_BONUSLEN]; }; struct { blkptr_t __dn_ignore2; uint8_t __dn_ignore3[DN_OLD_MAX_BONUSLEN - sizeof (blkptr_t)]; blkptr_t dn_spill; }; }; } dnode_phys_t; #define DN_SPILL_BLKPTR(dnp) ((blkptr_t *)((char *)(dnp) + \ (((dnp)->dn_extra_slots + 1) << DNODE_SHIFT) - (1 << SPA_BLKPTRSHIFT))) struct dnode { /* * Protects the structure of the dnode, including the number of levels * of indirection (dn_nlevels), dn_maxblkid, and dn_next_* */ krwlock_t dn_struct_rwlock; /* Our link on dn_objset->os_dnodes list; protected by os_lock. */ list_node_t dn_link; /* immutable: */ struct objset *dn_objset; uint64_t dn_object; struct dmu_buf_impl *dn_dbuf; struct dnode_handle *dn_handle; dnode_phys_t *dn_phys; /* pointer into dn->dn_dbuf->db.db_data */ /* * Copies of stuff in dn_phys. They're valid in the open * context (eg. even before the dnode is first synced). * Where necessary, these are protected by dn_struct_rwlock. */ dmu_object_type_t dn_type; /* object type */ uint16_t dn_bonuslen; /* bonus length */ uint8_t dn_bonustype; /* bonus type */ uint8_t dn_nblkptr; /* number of blkptrs (immutable) */ uint8_t dn_checksum; /* ZIO_CHECKSUM type */ uint8_t dn_compress; /* ZIO_COMPRESS type */ uint8_t dn_nlevels; uint8_t dn_indblkshift; uint8_t dn_datablkshift; /* zero if blksz not power of 2! */ uint8_t dn_moved; /* Has this dnode been moved? */ uint16_t dn_datablkszsec; /* in 512b sectors */ uint32_t dn_datablksz; /* in bytes */ uint64_t dn_maxblkid; uint8_t dn_next_type[TXG_SIZE]; uint8_t dn_num_slots; /* metadnode slots consumed on disk */ uint8_t dn_next_nblkptr[TXG_SIZE]; uint8_t dn_next_nlevels[TXG_SIZE]; uint8_t dn_next_indblkshift[TXG_SIZE]; uint8_t dn_next_bonustype[TXG_SIZE]; uint8_t dn_rm_spillblk[TXG_SIZE]; /* for removing spill blk */ uint16_t dn_next_bonuslen[TXG_SIZE]; uint32_t dn_next_blksz[TXG_SIZE]; /* next block size in bytes */ uint64_t dn_next_maxblkid[TXG_SIZE]; /* next maxblkid in bytes */ /* protected by dn_dbufs_mtx; declared here to fill 32-bit hole */ uint32_t dn_dbufs_count; /* count of dn_dbufs */ /* protected by os_lock: */ multilist_node_t dn_dirty_link[TXG_SIZE]; /* next on dataset's dirty */ /* protected by dn_mtx: */ kmutex_t dn_mtx; list_t dn_dirty_records[TXG_SIZE]; struct range_tree *dn_free_ranges[TXG_SIZE]; uint64_t dn_allocated_txg; uint64_t dn_free_txg; uint64_t dn_assigned_txg; uint64_t dn_dirty_txg; /* txg dnode was last dirtied */ kcondvar_t dn_notxholds; kcondvar_t dn_nodnholds; enum dnode_dirtycontext dn_dirtyctx; void *dn_dirtyctx_firstset; /* dbg: contents meaningless */ /* protected by own devices */ zfs_refcount_t dn_tx_holds; zfs_refcount_t dn_holds; kmutex_t dn_dbufs_mtx; /* * Descendent dbufs, ordered by dbuf_compare. Note that dn_dbufs * can contain multiple dbufs of the same (level, blkid) when a * dbuf is marked DB_EVICTING without being removed from * dn_dbufs. To maintain the avl invariant that there cannot be * duplicate entries, we order the dbufs by an arbitrary value - * their address in memory. This means that dn_dbufs cannot be used to * directly look up a dbuf. Instead, callers must use avl_walk, have * a reference to the dbuf, or look up a non-existent node with * db_state = DB_SEARCH (see dbuf_free_range for an example). */ avl_tree_t dn_dbufs; /* protected by dn_struct_rwlock */ struct dmu_buf_impl *dn_bonus; /* bonus buffer dbuf */ boolean_t dn_have_spill; /* have spill or are spilling */ /* parent IO for current sync write */ zio_t *dn_zio; /* used in syncing context */ uint64_t dn_oldused; /* old phys used bytes */ uint64_t dn_oldflags; /* old phys dn_flags */ uint64_t dn_olduid, dn_oldgid, dn_oldprojid; uint64_t dn_newuid, dn_newgid, dn_newprojid; int dn_id_flags; /* holds prefetch structure */ struct zfetch dn_zfetch; }; /* * Since AVL already has embedded element counter, use dn_dbufs_count * only for dbufs not counted there (bonus buffers) and just add them. */ #define DN_DBUFS_COUNT(dn) ((dn)->dn_dbufs_count + \ avl_numnodes(&(dn)->dn_dbufs)) /* * We use this (otherwise unused) bit to indicate if the value of * dn_next_maxblkid[txgoff] is valid to use in dnode_sync(). */ #define DMU_NEXT_MAXBLKID_SET (1ULL << 63) /* * Adds a level of indirection between the dbuf and the dnode to avoid * iterating descendent dbufs in dnode_move(). Handles are not allocated * individually, but as an array of child dnodes in dnode_hold_impl(). */ typedef struct dnode_handle { /* Protects dnh_dnode from modification by dnode_move(). */ zrlock_t dnh_zrlock; dnode_t *dnh_dnode; } dnode_handle_t; typedef struct dnode_children { dmu_buf_user_t dnc_dbu; /* User evict data */ size_t dnc_count; /* number of children */ dnode_handle_t dnc_children[]; /* sized dynamically */ } dnode_children_t; typedef struct free_range { avl_node_t fr_node; uint64_t fr_blkid; uint64_t fr_nblks; } free_range_t; void dnode_special_open(struct objset *dd, dnode_phys_t *dnp, uint64_t object, dnode_handle_t *dnh); void dnode_special_close(dnode_handle_t *dnh); void dnode_setbonuslen(dnode_t *dn, int newsize, dmu_tx_t *tx); void dnode_setbonus_type(dnode_t *dn, dmu_object_type_t, dmu_tx_t *tx); void dnode_rm_spill(dnode_t *dn, dmu_tx_t *tx); int dnode_hold(struct objset *dd, uint64_t object, void *ref, dnode_t **dnp); int dnode_hold_impl(struct objset *dd, uint64_t object, int flag, int dn_slots, void *ref, dnode_t **dnp); boolean_t dnode_add_ref(dnode_t *dn, void *ref); void dnode_rele(dnode_t *dn, void *ref); void dnode_rele_and_unlock(dnode_t *dn, void *tag, boolean_t evicting); int dnode_try_claim(objset_t *os, uint64_t object, int slots); +boolean_t dnode_is_dirty(dnode_t *dn); void dnode_setdirty(dnode_t *dn, dmu_tx_t *tx); void dnode_set_dirtyctx(dnode_t *dn, dmu_tx_t *tx, void *tag); void dnode_sync(dnode_t *dn, dmu_tx_t *tx); void dnode_allocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, int ibs, dmu_object_type_t bonustype, int bonuslen, int dn_slots, dmu_tx_t *tx); void dnode_reallocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, dmu_object_type_t bonustype, int bonuslen, int dn_slots, boolean_t keep_spill, dmu_tx_t *tx); void dnode_free(dnode_t *dn, dmu_tx_t *tx); void dnode_byteswap(dnode_phys_t *dnp); void dnode_buf_byteswap(void *buf, size_t size); void dnode_verify(dnode_t *dn); int dnode_set_nlevels(dnode_t *dn, int nlevels, dmu_tx_t *tx); int dnode_set_blksz(dnode_t *dn, uint64_t size, int ibs, dmu_tx_t *tx); void dnode_free_range(dnode_t *dn, uint64_t off, uint64_t len, dmu_tx_t *tx); void dnode_diduse_space(dnode_t *dn, int64_t space); void dnode_new_blkid(dnode_t *dn, uint64_t blkid, dmu_tx_t *tx, boolean_t have_read, boolean_t force); uint64_t dnode_block_freed(dnode_t *dn, uint64_t blkid); void dnode_init(void); void dnode_fini(void); int dnode_next_offset(dnode_t *dn, int flags, uint64_t *off, int minlvl, uint64_t blkfill, uint64_t txg); void dnode_evict_dbufs(dnode_t *dn); void dnode_evict_bonus(dnode_t *dn); void dnode_free_interior_slots(dnode_t *dn); #define DNODE_IS_DIRTY(_dn) \ ((_dn)->dn_dirty_txg >= spa_syncing_txg((_dn)->dn_objset->os_spa)) #define DNODE_IS_CACHEABLE(_dn) \ ((_dn)->dn_objset->os_primary_cache == ZFS_CACHE_ALL || \ (DMU_OT_IS_METADATA((_dn)->dn_type) && \ (_dn)->dn_objset->os_primary_cache == ZFS_CACHE_METADATA)) #define DNODE_META_IS_CACHEABLE(_dn) \ ((_dn)->dn_objset->os_primary_cache == ZFS_CACHE_ALL || \ (_dn)->dn_objset->os_primary_cache == ZFS_CACHE_METADATA) /* * Used for dnodestats kstat. */ typedef struct dnode_stats { /* * Number of failed attempts to hold a meta dnode dbuf. */ kstat_named_t dnode_hold_dbuf_hold; /* * Number of failed attempts to read a meta dnode dbuf. */ kstat_named_t dnode_hold_dbuf_read; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was able * to hold the requested object number which was allocated. This is * the common case when looking up any allocated object number. */ kstat_named_t dnode_hold_alloc_hits; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was not * able to hold the request object number because it was not allocated. */ kstat_named_t dnode_hold_alloc_misses; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was not * able to hold the request object number because the object number * refers to an interior large dnode slot. */ kstat_named_t dnode_hold_alloc_interior; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) needed * to retry acquiring slot zrl locks due to contention. */ kstat_named_t dnode_hold_alloc_lock_retry; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) did not * need to create the dnode because another thread did so after * dropping the read lock but before acquiring the write lock. */ kstat_named_t dnode_hold_alloc_lock_misses; /* * Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) found * a free dnode instantiated by dnode_create() but not yet allocated * by dnode_allocate(). */ kstat_named_t dnode_hold_alloc_type_none; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was able * to hold the requested range of free dnode slots. */ kstat_named_t dnode_hold_free_hits; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was not * able to hold the requested range of free dnode slots because * at least one slot was allocated. */ kstat_named_t dnode_hold_free_misses; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was not * able to hold the requested range of free dnode slots because * after acquiring the zrl lock at least one slot was allocated. */ kstat_named_t dnode_hold_free_lock_misses; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) needed * to retry acquiring slot zrl locks due to contention. */ kstat_named_t dnode_hold_free_lock_retry; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) requested * a range of dnode slots which were held by another thread. */ kstat_named_t dnode_hold_free_refcount; /* * Number of times dnode_hold(..., DNODE_MUST_BE_FREE) requested * a range of dnode slots which would overflow the dnode_phys_t. */ kstat_named_t dnode_hold_free_overflow; /* * Number of times dnode_free_interior_slots() needed to retry * acquiring a slot zrl lock due to contention. */ kstat_named_t dnode_free_interior_lock_retry; /* * Number of new dnodes allocated by dnode_allocate(). */ kstat_named_t dnode_allocate; /* * Number of dnodes re-allocated by dnode_reallocate(). */ kstat_named_t dnode_reallocate; /* * Number of meta dnode dbufs evicted. */ kstat_named_t dnode_buf_evict; /* * Number of times dmu_object_alloc*() reached the end of the existing * object ID chunk and advanced to a new one. */ kstat_named_t dnode_alloc_next_chunk; /* * Number of times multiple threads attempted to allocate a dnode * from the same block of free dnodes. */ kstat_named_t dnode_alloc_race; /* * Number of times dmu_object_alloc*() was forced to advance to the * next meta dnode dbuf due to an error from dmu_object_next(). */ kstat_named_t dnode_alloc_next_block; /* * Statistics for tracking dnodes which have been moved. */ kstat_named_t dnode_move_invalid; kstat_named_t dnode_move_recheck1; kstat_named_t dnode_move_recheck2; kstat_named_t dnode_move_special; kstat_named_t dnode_move_handle; kstat_named_t dnode_move_rwlock; kstat_named_t dnode_move_active; } dnode_stats_t; extern dnode_stats_t dnode_stats; #define DNODE_STAT_INCR(stat, val) \ atomic_add_64(&dnode_stats.stat.value.ui64, (val)); #define DNODE_STAT_BUMP(stat) \ DNODE_STAT_INCR(stat, 1); #ifdef ZFS_DEBUG #define dprintf_dnode(dn, fmt, ...) do { \ if (zfs_flags & ZFS_DEBUG_DPRINTF) { \ char __db_buf[32]; \ uint64_t __db_obj = (dn)->dn_object; \ if (__db_obj == DMU_META_DNODE_OBJECT) \ (void) strlcpy(__db_buf, "mdn", sizeof (__db_buf)); \ else \ (void) snprintf(__db_buf, sizeof (__db_buf), "%lld", \ (u_longlong_t)__db_obj);\ dprintf_ds((dn)->dn_objset->os_dsl_dataset, "obj=%s " fmt, \ __db_buf, __VA_ARGS__); \ } \ _NOTE(CONSTCOND) } while (0) #define DNODE_VERIFY(dn) dnode_verify(dn) #define FREE_VERIFY(db, start, end, tx) free_verify(db, start, end, tx) #else #define dprintf_dnode(db, fmt, ...) #define DNODE_VERIFY(dn) #define FREE_VERIFY(db, start, end, tx) #endif #ifdef __cplusplus } #endif #endif /* _SYS_DNODE_H */ diff --git a/man/man4/zfs.4 b/man/man4/zfs.4 index 2aed6895754a..20b24d898d84 100644 --- a/man/man4/zfs.4 +++ b/man/man4/zfs.4 @@ -1,2382 +1,2382 @@ .\" .\" Copyright (c) 2013 by Turbo Fredriksson . All rights reserved. .\" Copyright (c) 2019, 2021 by Delphix. All rights reserved. .\" Copyright (c) 2019 Datto Inc. .\" The contents of this file are subject to the terms of the Common Development .\" and Distribution License (the "License"). You may not use this file except .\" in compliance with the License. You can obtain a copy of the license at .\" usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. .\" .\" See the License for the specific language governing permissions and .\" limitations under the License. When distributing Covered Code, include this .\" CDDL HEADER in each file and include the License file at .\" usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this .\" CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your .\" own identifying information: .\" Portions Copyright [yyyy] [name of copyright owner] .\" .Dd June 1, 2021 .Dt ZFS 4 .Os . .Sh NAME .Nm zfs .Nd tuning of the ZFS kernel module . .Sh DESCRIPTION The ZFS module supports these parameters: .Bl -tag -width Ds .It Sy dbuf_cache_max_bytes Ns = Ns Sy ULONG_MAX Ns B Pq ulong Maximum size in bytes of the dbuf cache. The target size is determined by the MIN versus .No 1/2^ Ns Sy dbuf_cache_shift Pq 1/32nd of the target ARC size. The behavior of the dbuf cache and its associated settings can be observed via the .Pa /proc/spl/kstat/zfs/dbufstats kstat. . .It Sy dbuf_metadata_cache_max_bytes Ns = Ns Sy ULONG_MAX Ns B Pq ulong Maximum size in bytes of the metadata dbuf cache. The target size is determined by the MIN versus .No 1/2^ Ns Sy dbuf_metadata_cache_shift Pq 1/64th of the target ARC size. The behavior of the metadata dbuf cache and its associated settings can be observed via the .Pa /proc/spl/kstat/zfs/dbufstats kstat. . .It Sy dbuf_cache_hiwater_pct Ns = Ns Sy 10 Ns % Pq uint The percentage over .Sy dbuf_cache_max_bytes when dbufs must be evicted directly. . .It Sy dbuf_cache_lowater_pct Ns = Ns Sy 10 Ns % Pq uint The percentage below .Sy dbuf_cache_max_bytes when the evict thread stops evicting dbufs. . .It Sy dbuf_cache_shift Ns = Ns Sy 5 Pq int Set the size of the dbuf cache .Pq Sy dbuf_cache_max_bytes to a log2 fraction of the target ARC size. . .It Sy dbuf_metadata_cache_shift Ns = Ns Sy 6 Pq int Set the size of the dbuf metadata cache .Pq Sy dbuf_metadata_cache_max_bytes to a log2 fraction of the target ARC size. . .It Sy dmu_object_alloc_chunk_shift Ns = Ns Sy 7 Po 128 Pc Pq int dnode slots allocated in a single operation as a power of 2. The default value minimizes lock contention for the bulk operation performed. . .It Sy dmu_prefetch_max Ns = Ns Sy 134217728 Ns B Po 128MB Pc Pq int Limit the amount we can prefetch with one call to this amount in bytes. This helps to limit the amount of memory that can be used by prefetching. . .It Sy ignore_hole_birth Pq int Alias for .Sy send_holes_without_birth_time . . .It Sy l2arc_feed_again Ns = Ns Sy 1 Ns | Ns 0 Pq int Turbo L2ARC warm-up. When the L2ARC is cold the fill interval will be set as fast as possible. . .It Sy l2arc_feed_min_ms Ns = Ns Sy 200 Pq ulong Min feed interval in milliseconds. Requires .Sy l2arc_feed_again Ns = Ns Ar 1 and only applicable in related situations. . .It Sy l2arc_feed_secs Ns = Ns Sy 1 Pq ulong Seconds between L2ARC writing. . .It Sy l2arc_headroom Ns = Ns Sy 2 Pq ulong How far through the ARC lists to search for L2ARC cacheable content, expressed as a multiplier of .Sy l2arc_write_max . ARC persistence across reboots can be achieved with persistent L2ARC by setting this parameter to .Sy 0 , allowing the full length of ARC lists to be searched for cacheable content. . .It Sy l2arc_headroom_boost Ns = Ns Sy 200 Ns % Pq ulong Scales .Sy l2arc_headroom by this percentage when L2ARC contents are being successfully compressed before writing. A value of .Sy 100 disables this feature. . .It Sy l2arc_mfuonly Ns = Ns Sy 0 Ns | Ns 1 Pq int Controls whether only MFU metadata and data are cached from ARC into L2ARC. This may be desired to avoid wasting space on L2ARC when reading/writing large amounts of data that are not expected to be accessed more than once. .Pp The default is off, meaning both MRU and MFU data and metadata are cached. When turning off this feature, some MRU buffers will still be present in ARC and eventually cached on L2ARC. .No If Sy l2arc_noprefetch Ns = Ns Sy 0 , some prefetched buffers will be cached to L2ARC, and those might later transition to MRU, in which case the .Sy l2arc_mru_asize No arcstat will not be Sy 0 . .Pp Regardless of .Sy l2arc_noprefetch , some MFU buffers might be evicted from ARC, accessed later on as prefetches and transition to MRU as prefetches. If accessed again they are counted as MRU and the .Sy l2arc_mru_asize No arcstat will not be Sy 0 . .Pp The ARC status of L2ARC buffers when they were first cached in L2ARC can be seen in the .Sy l2arc_mru_asize , Sy l2arc_mfu_asize , No and Sy l2arc_prefetch_asize arcstats when importing the pool or onlining a cache device if persistent L2ARC is enabled. .Pp The .Sy evict_l2_eligible_mru arcstat does not take into account if this option is enabled as the information provided by the .Sy evict_l2_eligible_m[rf]u arcstats can be used to decide if toggling this option is appropriate for the current workload. . .It Sy l2arc_meta_percent Ns = Ns Sy 33 Ns % Pq int Percent of ARC size allowed for L2ARC-only headers. Since L2ARC buffers are not evicted on memory pressure, too many headers on a system with an irrationally large L2ARC can render it slow or unusable. This parameter limits L2ARC writes and rebuilds to achieve the target. . .It Sy l2arc_trim_ahead Ns = Ns Sy 0 Ns % Pq ulong Trims ahead of the current write size .Pq Sy l2arc_write_max on L2ARC devices by this percentage of write size if we have filled the device. If set to .Sy 100 we TRIM twice the space required to accommodate upcoming writes. A minimum of .Sy 64MB will be trimmed. It also enables TRIM of the whole L2ARC device upon creation or addition to an existing pool or if the header of the device is invalid upon importing a pool or onlining a cache device. A value of .Sy 0 disables TRIM on L2ARC altogether and is the default as it can put significant stress on the underlying storage devices. This will vary depending of how well the specific device handles these commands. . .It Sy l2arc_noprefetch Ns = Ns Sy 1 Ns | Ns 0 Pq int Do not write buffers to L2ARC if they were prefetched but not used by applications. In case there are prefetched buffers in L2ARC and this option is later set, we do not read the prefetched buffers from L2ARC. Unsetting this option is useful for caching sequential reads from the disks to L2ARC and serve those reads from L2ARC later on. This may be beneficial in case the L2ARC device is significantly faster in sequential reads than the disks of the pool. .Pp Use .Sy 1 to disable and .Sy 0 to enable caching/reading prefetches to/from L2ARC. . .It Sy l2arc_norw Ns = Ns Sy 0 Ns | Ns 1 Pq int No reads during writes. . .It Sy l2arc_write_boost Ns = Ns Sy 8388608 Ns B Po 8MB Pc Pq ulong Cold L2ARC devices will have .Sy l2arc_write_max increased by this amount while they remain cold. . .It Sy l2arc_write_max Ns = Ns Sy 8388608 Ns B Po 8MB Pc Pq ulong Max write bytes per interval. . .It Sy l2arc_rebuild_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Rebuild the L2ARC when importing a pool (persistent L2ARC). This can be disabled if there are problems importing a pool or attaching an L2ARC device (e.g. the L2ARC device is slow in reading stored log metadata, or the metadata has become somehow fragmented/unusable). . .It Sy l2arc_rebuild_blocks_min_l2size Ns = Ns Sy 1073741824 Ns B Po 1GB Pc Pq ulong Mininum size of an L2ARC device required in order to write log blocks in it. The log blocks are used upon importing the pool to rebuild the persistent L2ARC. .Pp For L2ARC devices less than 1GB, the amount of data .Fn l2arc_evict evicts is significant compared to the amount of restored L2ARC data. In this case, do not write log blocks in L2ARC in order not to waste space. . .It Sy metaslab_aliquot Ns = Ns Sy 524288 Ns B Po 512kB Pc Pq ulong Metaslab granularity, in bytes. This is roughly similar to what would be referred to as the "stripe size" in traditional RAID arrays. In normal operation, ZFS will try to write this amount of data to a top-level vdev before moving on to the next one. . .It Sy metaslab_bias_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable metaslab group biasing based on their vdevs' over- or under-utilization relative to the pool. . .It Sy metaslab_force_ganging Ns = Ns Sy 16777217 Ns B Ns B Po 16MB + 1B Pc Pq ulong Make some blocks above a certain size be gang blocks. This option is used by the test suite to facilitate testing. . .It Sy zfs_history_output_max Ns = Ns Sy 1048576 Ns B Ns B Po 1MB Pc Pq int When attempting to log an output nvlist of an ioctl in the on-disk history, the output will not be stored if it is larger than this size (in bytes). This must be less than .Sy DMU_MAX_ACCESS Pq 64MB . This applies primarily to .Fn zfs_ioc_channel_program Pq cf. Xr zfs-program 8 . . .It Sy zfs_keep_log_spacemaps_at_export Ns = Ns Sy 0 Ns | Ns 1 Pq int Prevent log spacemaps from being destroyed during pool exports and destroys. . .It Sy zfs_metaslab_segment_weight_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable/disable segment-based metaslab selection. . .It Sy zfs_metaslab_switch_threshold Ns = Ns Sy 2 Pq int When using segment-based metaslab selection, continue allocating from the active metaslab until this option's worth of buckets have been exhausted. . .It Sy metaslab_debug_load Ns = Ns Sy 0 Ns | Ns 1 Pq int Load all metaslabs during pool import. . .It Sy metaslab_debug_unload Ns = Ns Sy 0 Ns | Ns 1 Pq int Prevent metaslabs from being unloaded. . .It Sy metaslab_fragmentation_factor_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable use of the fragmentation metric in computing metaslab weights. . .It Sy metaslab_df_max_search Ns = Ns Sy 16777216 Ns B Po 16MB Pc Pq int Maximum distance to search forward from the last offset. Without this limit, fragmented pools can see .Em >100`000 iterations and .Fn metaslab_block_picker becomes the performance limiting factor on high-performance storage. .Pp With the default setting of .Sy 16MB , we typically see less than .Em 500 iterations, even with very fragmented .Sy ashift Ns = Ns Sy 9 pools. The maximum number of iterations possible is .Sy metaslab_df_max_search / 2^(ashift+1) . With the default setting of .Sy 16MB this is .Em 16*1024 Pq with Sy ashift Ns = Ns Sy 9 or .Em 2*1024 Pq with Sy ashift Ns = Ns Sy 12 . . .It Sy metaslab_df_use_largest_segment Ns = Ns Sy 0 Ns | Ns 1 Pq int If not searching forward (due to .Sy metaslab_df_max_search , metaslab_df_free_pct , .No or Sy metaslab_df_alloc_threshold ) , this tunable controls which segment is used. If set, we will use the largest free segment. If unset, we will use a segment of at least the requested size. . .It Sy zfs_metaslab_max_size_cache_sec Ns = Ns Sy 3600 Ns s Po 1h Pc Pq ulong When we unload a metaslab, we cache the size of the largest free chunk. We use that cached size to determine whether or not to load a metaslab for a given allocation. As more frees accumulate in that metaslab while it's unloaded, the cached max size becomes less and less accurate. After a number of seconds controlled by this tunable, we stop considering the cached max size and start considering only the histogram instead. . .It Sy zfs_metaslab_mem_limit Ns = Ns Sy 25 Ns % Pq int When we are loading a new metaslab, we check the amount of memory being used to store metaslab range trees. If it is over a threshold, we attempt to unload the least recently used metaslab to prevent the system from clogging all of its memory with range trees. This tunable sets the percentage of total system memory that is the threshold. . .It Sy zfs_metaslab_try_hard_before_gang Ns = Ns Sy 0 Ns | Ns 1 Pq int .Bl -item -compact .It If unset, we will first try normal allocation. .It If that fails then we will do a gang allocation. .It If that fails then we will do a "try hard" gang allocation. .It If that fails then we will have a multi-layer gang block. .El .Pp .Bl -item -compact .It If set, we will first try normal allocation. .It If that fails then we will do a "try hard" allocation. .It If that fails we will do a gang allocation. .It If that fails we will do a "try hard" gang allocation. .It If that fails then we will have a multi-layer gang block. .El . .It Sy zfs_metaslab_find_max_tries Ns = Ns Sy 100 Pq int When not trying hard, we only consider this number of the best metaslabs. This improves performance, especially when there are many metaslabs per vdev and the allocation can't actually be satisfied (so we would otherwise iterate all metaslabs). . .It Sy zfs_vdev_default_ms_count Ns = Ns Sy 200 Pq int When a vdev is added, target this number of metaslabs per top-level vdev. . .It Sy zfs_vdev_default_ms_shift Ns = Ns Sy 29 Po 512MB Pc Pq int Default limit for metaslab size. . .It Sy zfs_vdev_max_auto_ashift Ns = Ns Sy ASHIFT_MAX Po 16 Pc Pq ulong Maximum ashift used when optimizing for logical -> physical sector size on new top-level vdevs. . .It Sy zfs_vdev_min_auto_ashift Ns = Ns Sy ASHIFT_MIN Po 9 Pc Pq ulong Minimum ashift used when creating new top-level vdevs. . .It Sy zfs_vdev_min_ms_count Ns = Ns Sy 16 Pq int Minimum number of metaslabs to create in a top-level vdev. . .It Sy vdev_validate_skip Ns = Ns Sy 0 Ns | Ns 1 Pq int Skip label validation steps during pool import. Changing is not recommended unless you know what you're doing and are recovering a damaged label. . .It Sy zfs_vdev_ms_count_limit Ns = Ns Sy 131072 Po 128k Pc Pq int Practical upper limit of total metaslabs per top-level vdev. . .It Sy metaslab_preload_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable metaslab group preloading. . .It Sy metaslab_lba_weighting_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Give more weight to metaslabs with lower LBAs, assuming they have greater bandwidth, as is typically the case on a modern constant angular velocity disk drive. . .It Sy metaslab_unload_delay Ns = Ns Sy 32 Pq int After a metaslab is used, we keep it loaded for this many TXGs, to attempt to reduce unnecessary reloading. Note that both this many TXGs and .Sy metaslab_unload_delay_ms milliseconds must pass before unloading will occur. . .It Sy metaslab_unload_delay_ms Ns = Ns Sy 600000 Ns ms Po 10min Pc Pq int After a metaslab is used, we keep it loaded for this many milliseconds, to attempt to reduce unnecessary reloading. Note, that both this many milliseconds and .Sy metaslab_unload_delay TXGs must pass before unloading will occur. . .It Sy reference_history Ns = Ns Sy 3 Pq int Maximum reference holders being tracked when reference_tracking_enable is active. . .It Sy reference_tracking_enable Ns = Ns Sy 0 Ns | Ns 1 Pq int Track reference holders to .Sy refcount_t objects (debug builds only). . .It Sy send_holes_without_birth_time Ns = Ns Sy 1 Ns | Ns 0 Pq int When set, the .Sy hole_birth optimization will not be used, and all holes will always be sent during a .Nm zfs Cm send . This is useful if you suspect your datasets are affected by a bug in .Sy hole_birth . . .It Sy spa_config_path Ns = Ns Pa /etc/zfs/zpool.cache Pq charp SPA config file. . .It Sy spa_asize_inflation Ns = Ns Sy 24 Pq int Multiplication factor used to estimate actual disk consumption from the size of data being written. The default value is a worst case estimate, but lower values may be valid for a given pool depending on its configuration. Pool administrators who understand the factors involved may wish to specify a more realistic inflation factor, particularly if they operate close to quota or capacity limits. . .It Sy spa_load_print_vdev_tree Ns = Ns Sy 0 Ns | Ns 1 Pq int Whether to print the vdev tree in the debugging message buffer during pool import. . .It Sy spa_load_verify_data Ns = Ns Sy 1 Ns | Ns 0 Pq int Whether to traverse data blocks during an "extreme rewind" .Pq Fl X import. .Pp An extreme rewind import normally performs a full traversal of all blocks in the pool for verification. If this parameter is unset, the traversal skips non-metadata blocks. It can be toggled once the import has started to stop or start the traversal of non-metadata blocks. . .It Sy spa_load_verify_metadata Ns = Ns Sy 1 Ns | Ns 0 Pq int Whether to traverse blocks during an "extreme rewind" .Pq Fl X pool import. .Pp An extreme rewind import normally performs a full traversal of all blocks in the pool for verification. If this parameter is unset, the traversal is not performed. It can be toggled once the import has started to stop or start the traversal. . .It Sy spa_load_verify_shift Ns = Ns Sy 4 Po 1/16th Pc Pq int Sets the maximum number of bytes to consume during pool import to the log2 fraction of the target ARC size. . .It Sy spa_slop_shift Ns = Ns Sy 5 Po 1/32nd Pc Pq int Normally, we don't allow the last .Sy 3.2% Pq Sy 1/2^spa_slop_shift of space in the pool to be consumed. This ensures that we don't run the pool completely out of space, due to unaccounted changes (e.g. to the MOS). It also limits the worst-case time to allocate space. If we have less than this amount of free space, most ZPL operations (e.g. write, create) will return .Sy ENOSPC . . .It Sy vdev_removal_max_span Ns = Ns Sy 32768 Ns B Po 32kB Pc Pq int During top-level vdev removal, chunks of data are copied from the vdev which may include free space in order to trade bandwidth for IOPS. This parameter determines the maximum span of free space, in bytes, which will be included as "unnecessary" data in a chunk of copied data. .Pp The default value here was chosen to align with .Sy zfs_vdev_read_gap_limit , which is a similar concept when doing regular reads (but there's no reason it has to be the same). . .It Sy vdev_file_logical_ashift Ns = Ns Sy 9 Po 512B Pc Pq ulong Logical ashift for file-based devices. . .It Sy vdev_file_physical_ashift Ns = Ns Sy 9 Po 512B Pc Pq ulong Physical ashift for file-based devices. . .It Sy zap_iterate_prefetch Ns = Ns Sy 1 Ns | Ns 0 Pq int If set, when we start iterating over a ZAP object, prefetch the entire object (all leaf blocks). However, this is limited by .Sy dmu_prefetch_max . . .It Sy zfetch_array_rd_sz Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq ulong If prefetching is enabled, disable prefetching for reads larger than this size. . .It Sy zfetch_max_distance Ns = Ns Sy 8388608 Ns B Po 8MB Pc Pq uint Max bytes to prefetch per stream. . .It Sy zfetch_max_idistance Ns = Ns Sy 67108864 Ns B Po 64MB Pc Pq uint Max bytes to prefetch indirects for per stream. . .It Sy zfetch_max_streams Ns = Ns Sy 8 Pq uint Max number of streams per zfetch (prefetch streams per file). . .It Sy zfetch_min_sec_reap Ns = Ns Sy 2 Pq uint Min time before an active prefetch stream can be reclaimed . .It Sy zfs_abd_scatter_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enables ARC from using scatter/gather lists and forces all allocations to be linear in kernel memory. Disabling can improve performance in some code paths at the expense of fragmented kernel memory. . .It Sy zfs_abd_scatter_max_order Ns = Ns Sy MAX_ORDER-1 Pq uint Maximum number of consecutive memory pages allocated in a single block for scatter/gather lists. .Pp The value of .Sy MAX_ORDER depends on kernel configuration. . .It Sy zfs_abd_scatter_min_size Ns = Ns Sy 1536 Ns B Po 1.5kB Pc Pq uint This is the minimum allocation size that will use scatter (page-based) ABDs. Smaller allocations will use linear ABDs. . .It Sy zfs_arc_dnode_limit Ns = Ns Sy 0 Ns B Pq ulong When the number of bytes consumed by dnodes in the ARC exceeds this number of bytes, try to unpin some of it in response to demand for non-metadata. This value acts as a ceiling to the amount of dnode metadata, and defaults to .Sy 0 , which indicates that a percent which is based on .Sy zfs_arc_dnode_limit_percent of the ARC meta buffers that may be used for dnodes. .Pp Also see .Sy zfs_arc_meta_prune which serves a similar purpose but is used when the amount of metadata in the ARC exceeds .Sy zfs_arc_meta_limit rather than in response to overall demand for non-metadata. . .It Sy zfs_arc_dnode_limit_percent Ns = Ns Sy 10 Ns % Pq ulong Percentage that can be consumed by dnodes of ARC meta buffers. .Pp See also .Sy zfs_arc_dnode_limit , which serves a similar purpose but has a higher priority if nonzero. . .It Sy zfs_arc_dnode_reduce_percent Ns = Ns Sy 10 Ns % Pq ulong Percentage of ARC dnodes to try to scan in response to demand for non-metadata when the number of bytes consumed by dnodes exceeds .Sy zfs_arc_dnode_limit . . .It Sy zfs_arc_average_blocksize Ns = Ns Sy 8192 Ns B Po 8kB Pc Pq int The ARC's buffer hash table is sized based on the assumption of an average block size of this value. This works out to roughly 1MB of hash table per 1GB of physical memory with 8-byte pointers. For configurations with a known larger average block size, this value can be increased to reduce the memory footprint. . .It Sy zfs_arc_eviction_pct Ns = Ns Sy 200 Ns % Pq int When .Fn arc_is_overflowing , .Fn arc_get_data_impl waits for this percent of the requested amount of data to be evicted. For example, by default, for every .Em 2kB that's evicted, .Em 1kB of it may be "reused" by a new allocation. Since this is above .Sy 100 Ns % , it ensures that progress is made towards getting .Sy arc_size No under Sy arc_c . Since this is finite, it ensures that allocations can still happen, even during the potentially long time that .Sy arc_size No is more than Sy arc_c . . .It Sy zfs_arc_evict_batch_limit Ns = Ns Sy 10 Pq int Number ARC headers to evict per sub-list before proceeding to another sub-list. This batch-style operation prevents entire sub-lists from being evicted at once but comes at a cost of additional unlocking and locking. . .It Sy zfs_arc_grow_retry Ns = Ns Sy 0 Ns s Pq int If set to a non zero value, it will replace the .Sy arc_grow_retry value with this value. The .Sy arc_grow_retry .No value Pq default Sy 5 Ns s is the number of seconds the ARC will wait before trying to resume growth after a memory pressure event. . .It Sy zfs_arc_lotsfree_percent Ns = Ns Sy 10 Ns % Pq int Throttle I/O when free system memory drops below this percentage of total system memory. Setting this value to .Sy 0 will disable the throttle. . .It Sy zfs_arc_max Ns = Ns Sy 0 Ns B Pq ulong Max size of ARC in bytes. If .Sy 0 , then the max size of ARC is determined by the amount of system memory installed. Under Linux, half of system memory will be used as the limit. Under .Fx , the larger of .Sy all_system_memory - 1GB No and Sy 5/8 * all_system_memory will be used as the limit. This value must be at least .Sy 67108864 Ns B Pq 64MB . .Pp This value can be changed dynamically, with some caveats. It cannot be set back to .Sy 0 while running, and reducing it below the current ARC size will not cause the ARC to shrink without memory pressure to induce shrinking. . .It Sy zfs_arc_meta_adjust_restarts Ns = Ns Sy 4096 Pq ulong The number of restart passes to make while scanning the ARC attempting the free buffers in order to stay below the .Sy fs_arc_meta_limit . This value should not need to be tuned but is available to facilitate performance analysis. . .It Sy zfs_arc_meta_limit Ns = Ns Sy 0 Ns B Pq ulong The maximum allowed size in bytes that metadata buffers are allowed to consume in the ARC. When this limit is reached, metadata buffers will be reclaimed, even if the overall .Sy arc_c_max has not been reached. It defaults to .Sy 0 , which indicates that a percentage based on .Sy zfs_arc_meta_limit_percent of the ARC may be used for metadata. .Pp This value my be changed dynamically, except that must be set to an explicit value .Pq cannot be set back to Sy 0 . . .It Sy zfs_arc_meta_limit_percent Ns = Ns Sy 75 Ns % Pq ulong Percentage of ARC buffers that can be used for metadata. .Pp See also .Sy zfs_arc_meta_limit , which serves a similar purpose but has a higher priority if nonzero. . .It Sy zfs_arc_meta_min Ns = Ns Sy 0 Ns B Pq ulong The minimum allowed size in bytes that metadata buffers may consume in the ARC. . .It Sy zfs_arc_meta_prune Ns = Ns Sy 10000 Pq int The number of dentries and inodes to be scanned looking for entries which can be dropped. This may be required when the ARC reaches the .Sy zfs_arc_meta_limit because dentries and inodes can pin buffers in the ARC. Increasing this value will cause to dentry and inode caches to be pruned more aggressively. Setting this value to .Sy 0 will disable pruning the inode and dentry caches. . .It Sy zfs_arc_meta_strategy Ns = Ns Sy 1 Ns | Ns 0 Pq int Define the strategy for ARC metadata buffer eviction (meta reclaim strategy): .Bl -tag -compact -offset 4n -width "0 (META_ONLY)" .It Sy 0 Pq META_ONLY evict only the ARC metadata buffers .It Sy 1 Pq BALANCED additional data buffers may be evicted if required to evict the required number of metadata buffers. .El . .It Sy zfs_arc_min Ns = Ns Sy 0 Ns B Pq ulong Min size of ARC in bytes. .No If set to Sy 0 , arc_c_min will default to consuming the larger of .Sy 32MB No or Sy all_system_memory/32 . . .It Sy zfs_arc_min_prefetch_ms Ns = Ns Sy 0 Ns ms Ns Po Ns ≡ Ns 1s Pc Pq int Minimum time prefetched blocks are locked in the ARC. . .It Sy zfs_arc_min_prescient_prefetch_ms Ns = Ns Sy 0 Ns ms Ns Po Ns ≡ Ns 6s Pc Pq int Minimum time "prescient prefetched" blocks are locked in the ARC. These blocks are meant to be prefetched fairly aggressively ahead of the code that may use them. . .It Sy zfs_max_missing_tvds Ns = Ns Sy 0 Pq int Number of missing top-level vdevs which will be allowed during pool import (only in read-only mode). . .It Sy zfs_max_nvlist_src_size Ns = Sy 0 Pq ulong Maximum size in bytes allowed to be passed as .Sy zc_nvlist_src_size for ioctls on .Pa /dev/zfs . This prevents a user from causing the kernel to allocate an excessive amount of memory. When the limit is exceeded, the ioctl fails with .Sy EINVAL and a description of the error is sent to the .Pa zfs-dbgmsg log. This parameter should not need to be touched under normal circumstances. If .Sy 0 , equivalent to a quarter of the user-wired memory limit under .Fx and to .Sy 134217728 Ns B Pq 128MB under Linux. . .It Sy zfs_multilist_num_sublists Ns = Ns Sy 0 Pq int To allow more fine-grained locking, each ARC state contains a series of lists for both data and metadata objects. Locking is performed at the level of these "sub-lists". This parameters controls the number of sub-lists per ARC state, and also applies to other uses of the multilist data structure. .Pp If .Sy 0 , equivalent to the greater of the number of online CPUs and .Sy 4 . . .It Sy zfs_arc_overflow_shift Ns = Ns Sy 8 Pq int The ARC size is considered to be overflowing if it exceeds the current ARC target size .Pq Sy arc_c by thresholds determined by this parameter. Exceeding by .Sy ( arc_c >> zfs_arc_overflow_shift ) * 0.5 starts ARC reclamation process. If that appears insufficient, exceeding by .Sy ( arc_c >> zfs_arc_overflow_shift ) * 1.5 blocks new buffer allocation until the reclaim thread catches up. Started reclamation process continues till ARC size returns below the target size. .Pp The default value of .Sy 8 causes the ARC to start reclamation if it exceeds the target size by .Em 0.2% of the target size, and block allocations by .Em 0.6% . . .It Sy zfs_arc_p_min_shift Ns = Ns Sy 0 Pq int If nonzero, this will update .Sy arc_p_min_shift Pq default Sy 4 with the new value. .Sy arc_p_min_shift No is used as a shift of Sy arc_c when calculating the minumum .Sy arc_p No size. . .It Sy zfs_arc_p_dampener_disable Ns = Ns Sy 1 Ns | Ns 0 Pq int Disable .Sy arc_p adapt dampener, which reduces the maximum single adjustment to .Sy arc_p . . .It Sy zfs_arc_shrink_shift Ns = Ns Sy 0 Pq int If nonzero, this will update .Sy arc_shrink_shift Pq default Sy 7 with the new value. . .It Sy zfs_arc_pc_percent Ns = Ns Sy 0 Ns % Po off Pc Pq uint Percent of pagecache to reclaim ARC to. .Pp This tunable allows the ZFS ARC to play more nicely with the kernel's LRU pagecache. It can guarantee that the ARC size won't collapse under scanning pressure on the pagecache, yet still allows the ARC to be reclaimed down to .Sy zfs_arc_min if necessary. This value is specified as percent of pagecache size (as measured by .Sy NR_FILE_PAGES ) , where that percent may exceed .Sy 100 . This only operates during memory pressure/reclaim. . .It Sy zfs_arc_shrinker_limit Ns = Ns Sy 10000 Pq int This is a limit on how many pages the ARC shrinker makes available for eviction in response to one page allocation attempt. Note that in practice, the kernel's shrinker can ask us to evict up to about four times this for one allocation attempt. .Pp The default limit of .Sy 10000 Pq in practice, Em 160MB No per allocation attempt with 4kB pages limits the amount of time spent attempting to reclaim ARC memory to less than 100ms per allocation attempt, even with a small average compressed block size of ~8kB. .Pp The parameter can be set to 0 (zero) to disable the limit, and only applies on Linux. . .It Sy zfs_arc_sys_free Ns = Ns Sy 0 Ns B Pq ulong The target number of bytes the ARC should leave as free memory on the system. If zero, equivalent to the bigger of .Sy 512kB No and Sy all_system_memory/64 . . .It Sy zfs_autoimport_disable Ns = Ns Sy 1 Ns | Ns 0 Pq int Disable pool import at module load by ignoring the cache file .Pq Sy spa_config_path . . .It Sy zfs_checksum_events_per_second Ns = Ns Sy 20 Ns /s Pq uint Rate limit checksum events to this many per second. Note that this should not be set below the ZED thresholds (currently 10 checksums over 10 seconds) or else the daemon may not trigger any action. . .It Sy zfs_commit_timeout_pct Ns = Ns Sy 5 Ns % Pq int This controls the amount of time that a ZIL block (lwb) will remain "open" when it isn't "full", and it has a thread waiting for it to be committed to stable storage. The timeout is scaled based on a percentage of the last lwb latency to avoid significantly impacting the latency of each individual transaction record (itx). . .It Sy zfs_condense_indirect_commit_entry_delay_ms Ns = Ns Sy 0 Ns ms Pq int Vdev indirection layer (used for device removal) sleeps for this many milliseconds during mapping generation. Intended for use with the test suite to throttle vdev removal speed. . .It Sy zfs_condense_indirect_obsolete_pct Ns = Ns Sy 25 Ns % Pq int Minimum percent of obsolete bytes in vdev mapping required to attempt to condense .Pq see Sy zfs_condense_indirect_vdevs_enable . Intended for use with the test suite to facilitate triggering condensing as needed. . .It Sy zfs_condense_indirect_vdevs_enable Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable condensing indirect vdev mappings. When set, attempt to condense indirect vdev mappings if the mapping uses more than .Sy zfs_condense_min_mapping_bytes bytes of memory and if the obsolete space map object uses more than .Sy zfs_condense_max_obsolete_bytes bytes on-disk. The condensing process is an attempt to save memory by removing obsolete mappings. . .It Sy zfs_condense_max_obsolete_bytes Ns = Ns Sy 1073741824 Ns B Po 1GB Pc Pq ulong Only attempt to condense indirect vdev mappings if the on-disk size of the obsolete space map object is greater than this number of bytes .Pq see Sy zfs_condense_indirect_vdevs_enable . . .It Sy zfs_condense_min_mapping_bytes Ns = Ns Sy 131072 Ns B Po 128kB Pc Pq ulong Minimum size vdev mapping to attempt to condense .Pq see Sy zfs_condense_indirect_vdevs_enable . . .It Sy zfs_dbgmsg_enable Ns = Ns Sy 1 Ns | Ns 0 Pq int Internally ZFS keeps a small log to facilitate debugging. The log is enabled by default, and can be disabled by unsetting this option. The contents of the log can be accessed by reading .Pa /proc/spl/kstat/zfs/dbgmsg . Writing .Sy 0 to the file clears the log. .Pp This setting does not influence debug prints due to .Sy zfs_flags . . .It Sy zfs_dbgmsg_maxsize Ns = Ns Sy 4194304 Ns B Po 4MB Pc Pq int Maximum size of the internal ZFS debug log. . .It Sy zfs_dbuf_state_index Ns = Ns Sy 0 Pq int Historically used for controlling what reporting was available under .Pa /proc/spl/kstat/zfs . No effect. . .It Sy zfs_deadman_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int When a pool sync operation takes longer than .Sy zfs_deadman_synctime_ms , or when an individual I/O operation takes longer than .Sy zfs_deadman_ziotime_ms , then the operation is considered to be "hung". If .Sy zfs_deadman_enabled is set, then the deadman behavior is invoked as described by .Sy zfs_deadman_failmode . By default, the deadman is enabled and set to .Sy wait which results in "hung" I/Os only being logged. The deadman is automatically disabled when a pool gets suspended. . .It Sy zfs_deadman_failmode Ns = Ns Sy wait Pq charp Controls the failure behavior when the deadman detects a "hung" I/O operation. Valid values are: .Bl -tag -compact -offset 4n -width "continue" .It Sy wait Wait for a "hung" operation to complete. For each "hung" operation a "deadman" event will be posted describing that operation. .It Sy continue Attempt to recover from a "hung" operation by re-dispatching it to the I/O pipeline if possible. .It Sy panic Panic the system. This can be used to facilitate automatic fail-over to a properly configured fail-over partner. .El . .It Sy zfs_deadman_checktime_ms Ns = Ns Sy 60000 Ns ms Po 1min Pc Pq int Check time in milliseconds. This defines the frequency at which we check for hung I/O requests and potentially invoke the .Sy zfs_deadman_failmode behavior. . .It Sy zfs_deadman_synctime_ms Ns = Ns Sy 600000 Ns ms Po 10min Pc Pq ulong Interval in milliseconds after which the deadman is triggered and also the interval after which a pool sync operation is considered to be "hung". Once this limit is exceeded the deadman will be invoked every .Sy zfs_deadman_checktime_ms milliseconds until the pool sync completes. . .It Sy zfs_deadman_ziotime_ms Ns = Ns Sy 300000 Ns ms Po 5min Pc Pq ulong Interval in milliseconds after which the deadman is triggered and an individual I/O operation is considered to be "hung". As long as the operation remains "hung", the deadman will be invoked every .Sy zfs_deadman_checktime_ms milliseconds until the operation completes. . .It Sy zfs_dedup_prefetch Ns = Ns Sy 0 Ns | Ns 1 Pq int Enable prefetching dedup-ed blocks which are going to be freed. . .It Sy zfs_delay_min_dirty_percent Ns = Ns Sy 60 Ns % Pq int Start to delay each transaction once there is this amount of dirty data, expressed as a percentage of .Sy zfs_dirty_data_max . This value should be at least .Sy zfs_vdev_async_write_active_max_dirty_percent . .No See Sx ZFS TRANSACTION DELAY . . .It Sy zfs_delay_scale Ns = Ns Sy 500000 Pq int This controls how quickly the transaction delay approaches infinity. Larger values cause longer delays for a given amount of dirty data. .Pp For the smoothest delay, this value should be about 1 billion divided by the maximum number of operations per second. This will smoothly handle between ten times and a tenth of this number. .No See Sx ZFS TRANSACTION DELAY . .Pp .Sy zfs_delay_scale * zfs_dirty_data_max Em must be smaller than Sy 2^64 . . .It Sy zfs_disable_ivset_guid_check Ns = Ns Sy 0 Ns | Ns 1 Pq int Disables requirement for IVset GUIDs to be present and match when doing a raw receive of encrypted datasets. Intended for users whose pools were created with OpenZFS pre-release versions and now have compatibility issues. . .It Sy zfs_key_max_salt_uses Ns = Ns Sy 400000000 Po 4*10^8 Pc Pq ulong Maximum number of uses of a single salt value before generating a new one for encrypted datasets. The default value is also the maximum. . .It Sy zfs_object_mutex_size Ns = Ns Sy 64 Pq uint Size of the znode hashtable used for holds. .Pp Due to the need to hold locks on objects that may not exist yet, kernel mutexes are not created per-object and instead a hashtable is used where collisions will result in objects waiting when there is not actually contention on the same object. . .It Sy zfs_slow_io_events_per_second Ns = Ns Sy 20 Ns /s Pq int Rate limit delay and deadman zevents (which report slow I/Os) to this many per second. . .It Sy zfs_unflushed_max_mem_amt Ns = Ns Sy 1073741824 Ns B Po 1GB Pc Pq ulong Upper-bound limit for unflushed metadata changes to be held by the log spacemap in memory, in bytes. . .It Sy zfs_unflushed_max_mem_ppm Ns = Ns Sy 1000 Ns ppm Po 0.1% Pc Pq ulong Part of overall system memory that ZFS allows to be used for unflushed metadata changes by the log spacemap, in millionths. . .It Sy zfs_unflushed_log_block_max Ns = Ns Sy 262144 Po 256k Pc Pq ulong Describes the maximum number of log spacemap blocks allowed for each pool. The default value means that the space in all the log spacemaps can add up to no more than .Sy 262144 blocks (which means .Em 32GB of logical space before compression and ditto blocks, assuming that blocksize is .Em 128kB ) . .Pp This tunable is important because it involves a trade-off between import time after an unclean export and the frequency of flushing metaslabs. The higher this number is, the more log blocks we allow when the pool is active which means that we flush metaslabs less often and thus decrease the number of I/Os for spacemap updates per TXG. At the same time though, that means that in the event of an unclean export, there will be more log spacemap blocks for us to read, inducing overhead in the import time of the pool. The lower the number, the amount of flushing increases, destroying log blocks quicker as they become obsolete faster, which leaves less blocks to be read during import time after a crash. .Pp Each log spacemap block existing during pool import leads to approximately one extra logical I/O issued. This is the reason why this tunable is exposed in terms of blocks rather than space used. . .It Sy zfs_unflushed_log_block_min Ns = Ns Sy 1000 Pq ulong If the number of metaslabs is small and our incoming rate is high, we could get into a situation that we are flushing all our metaslabs every TXG. Thus we always allow at least this many log blocks. . .It Sy zfs_unflushed_log_block_pct Ns = Ns Sy 400 Ns % Pq ulong Tunable used to determine the number of blocks that can be used for the spacemap log, expressed as a percentage of the total number of metaslabs in the pool. . .It Sy zfs_unlink_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq uint When enabled, files will not be asynchronously removed from the list of pending unlinks and the space they consume will be leaked. Once this option has been disabled and the dataset is remounted, the pending unlinks will be processed and the freed space returned to the pool. This option is used by the test suite. . .It Sy zfs_delete_blocks Ns = Ns Sy 20480 Pq ulong This is the used to define a large file for the purposes of deletion. Files containing more than .Sy zfs_delete_blocks will be deleted asynchronously, while smaller files are deleted synchronously. Decreasing this value will reduce the time spent in an .Xr unlink 2 system call, at the expense of a longer delay before the freed space is available. . .It Sy zfs_dirty_data_max Ns = Pq int Determines the dirty space limit in bytes. Once this limit is exceeded, new writes are halted until space frees up. This parameter takes precedence over .Sy zfs_dirty_data_max_percent . .No See Sx ZFS TRANSACTION DELAY . .Pp Defaults to .Sy physical_ram/10 , capped at .Sy zfs_dirty_data_max_max . . .It Sy zfs_dirty_data_max_max Ns = Pq int Maximum allowable value of .Sy zfs_dirty_data_max , expressed in bytes. This limit is only enforced at module load time, and will be ignored if .Sy zfs_dirty_data_max is later changed. This parameter takes precedence over .Sy zfs_dirty_data_max_max_percent . .No See Sx ZFS TRANSACTION DELAY . .Pp Defaults to .Sy physical_ram/4 , . .It Sy zfs_dirty_data_max_max_percent Ns = Ns Sy 25 Ns % Pq int Maximum allowable value of .Sy zfs_dirty_data_max , expressed as a percentage of physical RAM. This limit is only enforced at module load time, and will be ignored if .Sy zfs_dirty_data_max is later changed. The parameter .Sy zfs_dirty_data_max_max takes precedence over this one. .No See Sx ZFS TRANSACTION DELAY . . .It Sy zfs_dirty_data_max_percent Ns = Ns Sy 10 Ns % Pq int Determines the dirty space limit, expressed as a percentage of all memory. Once this limit is exceeded, new writes are halted until space frees up. The parameter .Sy zfs_dirty_data_max takes precedence over this one. .No See Sx ZFS TRANSACTION DELAY . .Pp Subject to .Sy zfs_dirty_data_max_max . . .It Sy zfs_dirty_data_sync_percent Ns = Ns Sy 20 Ns % Pq int Start syncing out a transaction group if there's at least this much dirty data .Pq as a percentage of Sy zfs_dirty_data_max . This should be less than .Sy zfs_vdev_async_write_active_min_dirty_percent . . .It Sy zfs_fallocate_reserve_percent Ns = Ns Sy 110 Ns % Pq uint Since ZFS is a copy-on-write filesystem with snapshots, blocks cannot be preallocated for a file in order to guarantee that later writes will not run out of space. Instead, .Xr fallocate 2 space preallocation only checks that sufficient space is currently available in the pool or the user's project quota allocation, and then creates a sparse file of the requested size. The requested space is multiplied by .Sy zfs_fallocate_reserve_percent to allow additional space for indirect blocks and other internal metadata. Setting this to .Sy 0 disables support for .Xr fallocate 2 and causes it to return .Sy EOPNOTSUPP . . .It Sy zfs_fletcher_4_impl Ns = Ns Sy fastest Pq string Select a fletcher 4 implementation. .Pp Supported selectors are: .Sy fastest , scalar , sse2 , ssse3 , avx2 , avx512f , avx512bw , .No and Sy aarch64_neon . All except .Sy fastest No and Sy scalar require instruction set extensions to be available, and will only appear if ZFS detects that they are present at runtime. If multiple implementations of fletcher 4 are available, the .Sy fastest will be chosen using a micro benchmark. Selecting .Sy scalar results in the original CPU-based calculation being used. Selecting any option other than .Sy fastest No or Sy scalar results in vector instructions from the respective CPU instruction set being used. . .It Sy zfs_free_bpobj_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable/disable the processing of the free_bpobj object. . .It Sy zfs_async_block_max_blocks Ns = Ns Sy ULONG_MAX Po unlimited Pc Pq ulong Maximum number of blocks freed in a single TXG. . .It Sy zfs_max_async_dedup_frees Ns = Ns Sy 100000 Po 10^5 Pc Pq ulong Maximum number of dedup blocks freed in a single TXG. . .It Sy zfs_override_estimate_recordsize Ns = Ns Sy 0 Pq ulong If nonzer, override record size calculation for .Nm zfs Cm send estimates. . .It Sy zfs_vdev_async_read_max_active Ns = Ns Sy 3 Pq int Maximum asynchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_read_min_active Ns = Ns Sy 1 Pq int Minimum asynchronous read I/O operation active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_active_max_dirty_percent Ns = Ns Sy 60 Ns % Pq int When the pool has more than this much dirty data, use .Sy zfs_vdev_async_write_max_active to limit active async writes. If the dirty data is between the minimum and maximum, the active I/O limit is linearly interpolated. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_active_min_dirty_percent Ns = Ns Sy 30 Ns % Pq int When the pool has less than this much dirty data, use .Sy zfs_vdev_async_write_min_active to limit active async writes. If the dirty data is between the minimum and maximum, the active I/O limit is linearly interpolated. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_max_active Ns = Ns Sy 30 Pq int Maximum asynchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_min_active Ns = Ns Sy 2 Pq int Minimum asynchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . .Pp Lower values are associated with better latency on rotational media but poorer resilver performance. The default value of .Sy 2 was chosen as a compromise. A value of .Sy 3 has been shown to improve resilver performance further at a cost of further increasing latency. . .It Sy zfs_vdev_initializing_max_active Ns = Ns Sy 1 Pq int Maximum initializing I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_initializing_min_active Ns = Ns Sy 1 Pq int Minimum initializing I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_max_active Ns = Ns Sy 1000 Pq int The maximum number of I/O operations active to each device. Ideally, this will be at least the sum of each queue's .Sy max_active . .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_rebuild_max_active Ns = Ns Sy 3 Pq int Maximum sequential resilver I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_rebuild_min_active Ns = Ns Sy 1 Pq int Minimum sequential resilver I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_removal_max_active Ns = Ns Sy 2 Pq int Maximum removal I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_removal_min_active Ns = Ns Sy 1 Pq int Minimum removal I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_scrub_max_active Ns = Ns Sy 2 Pq int Maximum scrub I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_scrub_min_active Ns = Ns Sy 1 Pq int Minimum scrub I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_read_max_active Ns = Ns Sy 10 Pq int Maximum synchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_read_min_active Ns = Ns Sy 10 Pq int Minimum synchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_write_max_active Ns = Ns Sy 10 Pq int Maximum synchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_write_min_active Ns = Ns Sy 10 Pq int Minimum synchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_trim_max_active Ns = Ns Sy 2 Pq int Maximum trim/discard I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_trim_min_active Ns = Ns Sy 1 Pq int Minimum trim/discard I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_nia_delay Ns = Ns Sy 5 Pq int For non-interactive I/O (scrub, resilver, removal, initialize and rebuild), the number of concurrently-active I/O operations is limited to .Sy zfs_*_min_active , unless the vdev is "idle". When there are no interactive I/O operatinons active (synchronous or otherwise), and .Sy zfs_vdev_nia_delay operations have completed since the last interactive operation, then the vdev is considered to be "idle", and the number of concurrently-active non-interactive operations is increased to .Sy zfs_*_max_active . .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_nia_credit Ns = Ns Sy 5 Pq int Some HDDs tend to prioritize sequential I/O so strongly, that concurrent random I/O latency reaches several seconds. On some HDDs this happens even if sequential I/O operations are submitted one at a time, and so setting .Sy zfs_*_max_active Ns = Sy 1 does not help. To prevent non-interactive I/O, like scrub, from monopolizing the device, no more than .Sy zfs_vdev_nia_credit operations can be sent while there are outstanding incomplete interactive operations. This enforced wait ensures the HDD services the interactive I/O within a reasonable amount of time. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_queue_depth_pct Ns = Ns Sy 1000 Ns % Pq int Maximum number of queued allocations per top-level vdev expressed as a percentage of .Sy zfs_vdev_async_write_max_active , which allows the system to detect devices that are more capable of handling allocations and to allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced, as fuller devices will tend to be slower than empty devices. .Pp Also see .Sy zio_dva_throttle_enabled . . .It Sy zfs_expire_snapshot Ns = Ns Sy 300 Ns s Pq int Time before expiring .Pa .zfs/snapshot . . .It Sy zfs_admin_snapshot Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow the creation, removal, or renaming of entries in the .Sy .zfs/snapshot directory to cause the creation, destruction, or renaming of snapshots. When enabled, this functionality works both locally and over NFS exports which have the .Em no_root_squash option set. . .It Sy zfs_flags Ns = Ns Sy 0 Pq int Set additional debugging flags. The following flags may be bitwise-ored together: .TS box; lbz r l l . Value Symbolic Name Description _ 1 ZFS_DEBUG_DPRINTF Enable dprintf entries in the debug log. * 2 ZFS_DEBUG_DBUF_VERIFY Enable extra dbuf verifications. * 4 ZFS_DEBUG_DNODE_VERIFY Enable extra dnode verifications. 8 ZFS_DEBUG_SNAPNAMES Enable snapshot name verification. 16 ZFS_DEBUG_MODIFY Check for illegally modified ARC buffers. 64 ZFS_DEBUG_ZIO_FREE Enable verification of block frees. 128 ZFS_DEBUG_HISTOGRAM_VERIFY Enable extra spacemap histogram verifications. 256 ZFS_DEBUG_METASLAB_VERIFY Verify space accounting on disk matches in-memory \fBrange_trees\fP. 512 ZFS_DEBUG_SET_ERROR Enable \fBSET_ERROR\fP and dprintf entries in the debug log. 1024 ZFS_DEBUG_INDIRECT_REMAP Verify split blocks created by device removal. 2048 ZFS_DEBUG_TRIM Verify TRIM ranges are always within the allocatable range tree. 4096 ZFS_DEBUG_LOG_SPACEMAP Verify that the log summary is consistent with the spacemap log and enable \fBzfs_dbgmsgs\fP for metaslab loading and flushing. .TE .Sy \& * No Requires debug build. . .It Sy zfs_free_leak_on_eio Ns = Ns Sy 0 Ns | Ns 1 Pq int If destroy encounters an .Sy EIO while reading metadata (e.g. indirect blocks), space referenced by the missing metadata can not be freed. Normally this causes the background destroy to become "stalled", as it is unable to make forward progress. While in this stalled state, all remaining space to free from the error-encountering filesystem is "temporarily leaked". Set this flag to cause it to ignore the .Sy EIO , permanently leak the space from indirect blocks that can not be read, and continue to free everything else that it can. .Pp The default "stalling" behavior is useful if the storage partially fails (i.e. some but not all I/O operations fail), and then later recovers. In this case, we will be able to continue pool operations while it is partially failed, and when it recovers, we can continue to free the space, with no leaks. Note, however, that this case is actually fairly rare. .Pp Typically pools either .Bl -enum -compact -offset 4n -width "1." .It fail completely (but perhaps temporarily, e.g. due to a top-level vdev going offline), or .It have localized, permanent errors (e.g. disk returns the wrong data due to bit flip or firmware bug). .El In the former case, this setting does not matter because the pool will be suspended and the sync thread will not be able to make forward progress regardless. In the latter, because the error is permanent, the best we can do is leak the minimum amount of space, which is what setting this flag will do. It is therefore reasonable for this flag to normally be set, but we chose the more conservative approach of not setting it, so that there is no possibility of leaking space in the "partial temporary" failure case. . .It Sy zfs_free_min_time_ms Ns = Ns Sy 1000 Ns ms Po 1s Pc Pq int During a .Nm zfs Cm destroy operation using the .Sy async_destroy feature, a minimum of this much time will be spent working on freeing blocks per TXG. . .It Sy zfs_obsolete_min_time_ms Ns = Ns Sy 500 Ns ms Pq int Similar to .Sy zfs_free_min_time_ms , but for cleanup of old indirection records for removed vdevs. . .It Sy zfs_immediate_write_sz Ns = Ns Sy 32768 Ns B Po 32kB Pc Pq long Largest data block to write to the ZIL. Larger blocks will be treated as if the dataset being written to had the .Sy logbias Ns = Ns Sy throughput property set. . .It Sy zfs_initialize_value Ns = Ns Sy 16045690984833335022 Po 0xDEADBEEFDEADBEEE Pc Pq ulong Pattern written to vdev free space by .Xr zpool-initialize 8 . . .It Sy zfs_initialize_chunk_size Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq ulong Size of writes used by .Xr zpool-initialize 8 . This option is used by the test suite. . .It Sy zfs_livelist_max_entries Ns = Ns Sy 500000 Po 5*10^5 Pc Pq ulong The threshold size (in block pointers) at which we create a new sub-livelist. Larger sublists are more costly from a memory perspective but the fewer sublists there are, the lower the cost of insertion. . .It Sy zfs_livelist_min_percent_shared Ns = Ns Sy 75 Ns % Pq int If the amount of shared space between a snapshot and its clone drops below this threshold, the clone turns off the livelist and reverts to the old deletion method. This is in place because livelists no long give us a benefit once a clone has been overwritten enough. . .It Sy zfs_livelist_condense_new_alloc Ns = Ns Sy 0 Pq int Incremented each time an extra ALLOC blkptr is added to a livelist entry while it is being condensed. This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_sync_cancel Ns = Ns Sy 0 Pq int Incremented each time livelist condensing is canceled while in .Fn spa_livelist_condense_sync . This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_sync_pause Ns = Ns Sy 0 Ns | Ns 1 Pq int When set, the livelist condense process pauses indefinitely before executing the synctask - .Fn spa_livelist_condense_sync . This option is used by the test suite to trigger race conditions. . .It Sy zfs_livelist_condense_zthr_cancel Ns = Ns Sy 0 Pq int Incremented each time livelist condensing is canceled while in .Fn spa_livelist_condense_cb . This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_zthr_pause Ns = Ns Sy 0 Ns | Ns 1 Pq int When set, the livelist condense process pauses indefinitely before executing the open context condensing work in .Fn spa_livelist_condense_cb . This option is used by the test suite to trigger race conditions. . .It Sy zfs_lua_max_instrlimit Ns = Ns Sy 100000000 Po 10^8 Pc Pq ulong The maximum execution time limit that can be set for a ZFS channel program, specified as a number of Lua instructions. . .It Sy zfs_lua_max_memlimit Ns = Ns Sy 104857600 Po 100MB Pc Pq ulong The maximum memory limit that can be set for a ZFS channel program, specified in bytes. . .It Sy zfs_max_dataset_nesting Ns = Ns Sy 50 Pq int The maximum depth of nested datasets. This value can be tuned temporarily to fix existing datasets that exceed the predefined limit. . .It Sy zfs_max_log_walking Ns = Ns Sy 5 Pq ulong The number of past TXGs that the flushing algorithm of the log spacemap feature uses to estimate incoming log blocks. . .It Sy zfs_max_logsm_summary_length Ns = Ns Sy 10 Pq ulong Maximum number of rows allowed in the summary of the spacemap log. . .It Sy zfs_max_recordsize Ns = Ns Sy 1048576 Po 1MB Pc Pq int We currently support block sizes from .Em 512B No to Em 16MB . The benefits of larger blocks, and thus larger I/O, need to be weighed against the cost of COWing a giant block to modify one byte. Additionally, very large blocks can have an impact on I/O latency, and also potentially on the memory allocator. Therefore, we do not allow the recordsize to be set larger than this tunable. Larger blocks can be created by changing it, and pools with larger blocks can always be imported and used, regardless of this setting. . .It Sy zfs_allow_redacted_dataset_mount Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow datasets received with redacted send/receive to be mounted. Normally disabled because these datasets may be missing key data. . .It Sy zfs_min_metaslabs_to_flush Ns = Ns Sy 1 Pq ulong Minimum number of metaslabs to flush per dirty TXG. . .It Sy zfs_metaslab_fragmentation_threshold Ns = Ns Sy 70 Ns % Pq int Allow metaslabs to keep their active state as long as their fragmentation percentage is no more than this value. An active metaslab that exceeds this threshold will no longer keep its active status allowing better metaslabs to be selected. . .It Sy zfs_mg_fragmentation_threshold Ns = Ns Sy 95 Ns % Pq int Metaslab groups are considered eligible for allocations if their fragmentation metric (measured as a percentage) is less than or equal to this value. If a metaslab group exceeds this threshold then it will be skipped unless all metaslab groups within the metaslab class have also crossed this threshold. . .It Sy zfs_mg_noalloc_threshold Ns = Ns Sy 0 Ns % Pq int Defines a threshold at which metaslab groups should be eligible for allocations. The value is expressed as a percentage of free space beyond which a metaslab group is always eligible for allocations. If a metaslab group's free space is less than or equal to the threshold, the allocator will avoid allocating to that group unless all groups in the pool have reached the threshold. Once all groups have reached the threshold, all groups are allowed to accept allocations. The default value of .Sy 0 disables the feature and causes all metaslab groups to be eligible for allocations. .Pp This parameter allows one to deal with pools having heavily imbalanced vdevs such as would be the case when a new vdev has been added. Setting the threshold to a non-zero percentage will stop allocations from being made to vdevs that aren't filled to the specified percentage and allow lesser filled vdevs to acquire more allocations than they otherwise would under the old .Sy zfs_mg_alloc_failures facility. . .It Sy zfs_ddt_data_is_special Ns = Ns Sy 1 Ns | Ns 0 Pq int If enabled, ZFS will place DDT data into the special allocation class. . .It Sy zfs_user_indirect_is_special Ns = Ns Sy 1 Ns | Ns 0 Pq int If enabled, ZFS will place user data indirect blocks into the special allocation class. . .It Sy zfs_multihost_history Ns = Ns Sy 0 Pq int Historical statistics for this many latest multihost updates will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /multihost . . .It Sy zfs_multihost_interval Ns = Ns Sy 1000 Ns ms Po 1s Pc Pq ulong Used to control the frequency of multihost writes which are performed when the .Sy multihost pool property is on. This is one of the factors used to determine the length of the activity check during import. .Pp The multihost write period is .Sy zfs_multihost_interval / leaf-vdevs . On average a multihost write will be issued for each leaf vdev every .Sy zfs_multihost_interval milliseconds. In practice, the observed period can vary with the I/O load and this observed value is the delay which is stored in the uberblock. . .It Sy zfs_multihost_import_intervals Ns = Ns Sy 20 Pq uint Used to control the duration of the activity test on import. Smaller values of .Sy zfs_multihost_import_intervals will reduce the import time but increase the risk of failing to detect an active pool. The total activity check time is never allowed to drop below one second. .Pp On import the activity check waits a minimum amount of time determined by .Sy zfs_multihost_interval * zfs_multihost_import_intervals , or the same product computed on the host which last had the pool imported, whichever is greater. The activity check time may be further extended if the value of MMP delay found in the best uberblock indicates actual multihost updates happened at longer intervals than .Sy zfs_multihost_interval . A minimum of .Em 100ms is enforced. .Pp .Sy 0 No is equivalent to Sy 1 . . .It Sy zfs_multihost_fail_intervals Ns = Ns Sy 10 Pq uint Controls the behavior of the pool when multihost write failures or delays are detected. .Pp When .Sy 0 , multihost write failures or delays are ignored. The failures will still be reported to the ZED which depending on its configuration may take action such as suspending the pool or offlining a device. .Pp Otherwise, the pool will be suspended if .Sy zfs_multihost_fail_intervals * zfs_multihost_interval milliseconds pass without a successful MMP write. This guarantees the activity test will see MMP writes if the pool is imported. .Sy 1 No is equivalent to Sy 2 ; this is necessary to prevent the pool from being suspended due to normal, small I/O latency variations. . .It Sy zfs_no_scrub_io Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to disable scrub I/O. This results in scrubs not actually scrubbing data and simply doing a metadata crawl of the pool instead. . .It Sy zfs_no_scrub_prefetch Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to disable block prefetching for scrubs. . .It Sy zfs_nocacheflush Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable cache flush operations on disks when writing. Setting this will cause pool corruption on power loss if a volatile out-of-order write cache is enabled. . .It Sy zfs_nopwrite_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Allow no-operation writes. The occurrence of nopwrites will further depend on other pool properties .Pq i.a. the checksumming and compression algorithms . . -.It Sy zfs_dmu_offset_next_sync Ns = Ns Sy 0 Ns | ns 1 Pq int +.It Sy zfs_dmu_offset_next_sync Ns = Ns Sy 0 Ns | Ns 1 Pq int Enable forcing TXG sync to find holes. When enabled forces ZFS to act like prior versions when .Sy SEEK_HOLE No or Sy SEEK_DATA flags are used, which, when a dnode is dirty, causes TXGs to be synced so that this data can be found. . .It Sy zfs_pd_bytes_max Ns = Ns Sy 52428800 Ns B Po 50MB Pc Pq int The number of bytes which should be prefetched during a pool traversal, like .Nm zfs Cm send or other data crawling operations. . .It Sy zfs_traverse_indirect_prefetch_limit Ns = Ns Sy 32 Pq int The number of blocks pointed by indirect (non-L0) block which should be prefetched during a pool traversal, like .Nm zfs Cm send or other data crawling operations. . .It Sy zfs_per_txg_dirty_frees_percent Ns = Ns Sy 5 Ns % Pq ulong Control percentage of dirtied indirect blocks from frees allowed into one TXG. After this threshold is crossed, additional frees will wait until the next TXG. .Sy 0 No disables this throttle. . .It Sy zfs_prefetch_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable predictive prefetch. Note that it leaves "prescient" prefetch (for. e.g.\& .Nm zfs Cm send ) intact. Unlike predictive prefetch, prescient prefetch never issues I/O that ends up not being needed, so it can't hurt performance. . .It Sy zfs_qat_checksum_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for SHA256 checksums. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_qat_compress_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for gzip compression. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_qat_encrypt_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for AES-GCM encryption. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_vnops_read_chunk_size Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq long Bytes to read per chunk. . .It Sy zfs_read_history Ns = Ns Sy 0 Pq int Historical statistics for this many latest reads will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /reads . . .It Sy zfs_read_history_hits Ns = Ns Sy 0 Ns | Ns 1 Pq int Include cache hits in read history . .It Sy zfs_rebuild_max_segment Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq ulong Maximum read segment size to issue when sequentially resilvering a top-level vdev. . .It Sy zfs_rebuild_scrub_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Automatically start a pool scrub when the last active sequential resilver completes in order to verify the checksums of all blocks which have been resilvered. This is enabled by default and strongly recommended. . .It Sy zfs_rebuild_vdev_limit Ns = Ns Sy 33554432 Ns B Po 32MB Pc Pq ulong Maximum amount of I/O that can be concurrently issued for a sequential resilver per leaf device, given in bytes. . .It Sy zfs_reconstruct_indirect_combinations_max Ns = Ns Sy 4096 Pq int If an indirect split block contains more than this many possible unique combinations when being reconstructed, consider it too computationally expensive to check them all. Instead, try at most this many randomly selected combinations each time the block is accessed. This allows all segment copies to participate fairly in the reconstruction when all combinations cannot be checked and prevents repeated use of one bad copy. . .It Sy zfs_recover Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to attempt to recover from fatal errors. This should only be used as a last resort, as it typically results in leaked space, or worse. . .It Sy zfs_removal_ignore_errors Ns = Ns Sy 0 Ns | Ns 1 Pq int Ignore hard IO errors during device removal. When set, if a device encounters a hard IO error during the removal process the removal will not be cancelled. This can result in a normally recoverable block becoming permanently damaged and is hence not recommended. This should only be used as a last resort when the pool cannot be returned to a healthy state prior to removing the device. . .It Sy zfs_removal_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq int This is used by the test suite so that it can ensure that certain actions happen while in the middle of a removal. . .It Sy zfs_remove_max_segment Ns = Ns Sy 16777216 Ns B Po 16MB Pc Pq int The largest contiguous segment that we will attempt to allocate when removing a device. If there is a performance problem with attempting to allocate large blocks, consider decreasing this. The default value is also the maximum. . .It Sy zfs_resilver_disable_defer Ns = Ns Sy 0 Ns | Ns 1 Pq int Ignore the .Sy resilver_defer feature, causing an operation that would start a resilver to immediately restart the one in progress. . .It Sy zfs_resilver_min_time_ms Ns = Ns Sy 3000 Ns ms Po 3s Pc Pq int Resilvers are processed by the sync thread. While resilvering, it will spend at least this much time working on a resilver between TXG flushes. . .It Sy zfs_scan_ignore_errors Ns = Ns Sy 0 Ns | Ns 1 Pq int If set, remove the DTL (dirty time list) upon completion of a pool scan (scrub), even if there were unrepairable errors. Intended to be used during pool repair or recovery to stop resilvering when the pool is next imported. . .It Sy zfs_scrub_min_time_ms Ns = Ns Sy 1000 Ns ms Po 1s Pc Pq int Scrubs are processed by the sync thread. While scrubbing, it will spend at least this much time working on a scrub between TXG flushes. . .It Sy zfs_scan_checkpoint_intval Ns = Ns Sy 7200 Ns s Po 2h Pc Pq int To preserve progress across reboots, the sequential scan algorithm periodically needs to stop metadata scanning and issue all the verification I/O to disk. The frequency of this flushing is determined by this tunable. . .It Sy zfs_scan_fill_weight Ns = Ns Sy 3 Pq int This tunable affects how scrub and resilver I/O segments are ordered. A higher number indicates that we care more about how filled in a segment is, while a lower number indicates we care more about the size of the extent without considering the gaps within a segment. This value is only tunable upon module insertion. Changing the value afterwards will have no affect on scrub or resilver performance. . .It Sy zfs_scan_issue_strategy Ns = Ns Sy 0 Pq int Determines the order that data will be verified while scrubbing or resilvering: .Bl -tag -compact -offset 4n -width "a" .It Sy 1 Data will be verified as sequentially as possible, given the amount of memory reserved for scrubbing .Pq see Sy zfs_scan_mem_lim_fact . This may improve scrub performance if the pool's data is very fragmented. .It Sy 2 The largest mostly-contiguous chunk of found data will be verified first. By deferring scrubbing of small segments, we may later find adjacent data to coalesce and increase the segment size. .It Sy 0 .No Use strategy Sy 1 No during normal verification .No and strategy Sy 2 No while taking a checkpoint. .El . .It Sy zfs_scan_legacy Ns = Ns Sy 0 Ns | Ns 1 Pq int If unset, indicates that scrubs and resilvers will gather metadata in memory before issuing sequential I/O. Otherwise indicates that the legacy algorithm will be used, where I/O is initiated as soon as it is discovered. Unsetting will not affect scrubs or resilvers that are already in progress. . .It Sy zfs_scan_max_ext_gap Ns = Ns Sy 2097152 Ns B Po 2MB Pc Pq int Sets the largest gap in bytes between scrub/resilver I/O operations that will still be considered sequential for sorting purposes. Changing this value will not affect scrubs or resilvers that are already in progress. . .It Sy zfs_scan_mem_lim_fact Ns = Ns Sy 20 Ns ^-1 Pq int Maximum fraction of RAM used for I/O sorting by sequential scan algorithm. This tunable determines the hard limit for I/O sorting memory usage. When the hard limit is reached we stop scanning metadata and start issuing data verification I/O. This is done until we get below the soft limit. . .It Sy zfs_scan_mem_lim_soft_fact Ns = Ns Sy 20 Ns ^-1 Pq int The fraction of the hard limit used to determined the soft limit for I/O sorting by the sequential scan algorithm. When we cross this limit from below no action is taken. When we cross this limit from above it is because we are issuing verification I/O. In this case (unless the metadata scan is done) we stop issuing verification I/O and start scanning metadata again until we get to the hard limit. . .It Sy zfs_scan_strict_mem_lim Ns = Ns Sy 0 Ns | Ns 1 Pq int Enforce tight memory limits on pool scans when a sequential scan is in progress. When disabled, the memory limit may be exceeded by fast disks. . .It Sy zfs_scan_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq int Freezes a scrub/resilver in progress without actually pausing it. Intended for testing/debugging. . .It Sy zfs_scan_vdev_limit Ns = Ns Sy 4194304 Ns B Po 4MB Pc Pq int Maximum amount of data that can be concurrently issued at once for scrubs and resilvers per leaf device, given in bytes. . .It Sy zfs_send_corrupt_data Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow sending of corrupt data (ignore read/checksum errors when sending). . .It Sy zfs_send_unmodified_spill_blocks Ns = Ns Sy 1 Ns | Ns 0 Pq int Include unmodified spill blocks in the send stream. Under certain circumstances, previous versions of ZFS could incorrectly remove the spill block from an existing object. Including unmodified copies of the spill blocks creates a backwards-compatible stream which will recreate a spill block if it was incorrectly removed. . .It Sy zfs_send_no_prefetch_queue_ff Ns = Ns Sy 20 Ns ^-1 Pq int The fill fraction of the .Nm zfs Cm send internal queues. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_send_no_prefetch_queue_length Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq int The maximum number of bytes allowed in .Nm zfs Cm send Ns 's internal queues. . .It Sy zfs_send_queue_ff Ns = Ns Sy 20 Ns ^-1 Pq int The fill fraction of the .Nm zfs Cm send prefetch queue. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_send_queue_length Ns = Ns Sy 16777216 Ns B Po 16MB Pc Pq int The maximum number of bytes allowed that will be prefetched by .Nm zfs Cm send . This value must be at least twice the maximum block size in use. . .It Sy zfs_recv_queue_ff Ns = Ns Sy 20 Ns ^-1 Pq int The fill fraction of the .Nm zfs Cm receive queue. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_recv_queue_length Ns = Ns Sy 16777216 Ns B Po 16MB Pc Pq int The maximum number of bytes allowed in the .Nm zfs Cm receive queue. This value must be at least twice the maximum block size in use. . .It Sy zfs_recv_write_batch_size Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq int The maximum amount of data, in bytes, that .Nm zfs Cm receive will write in one DMU transaction. This is the uncompressed size, even when receiving a compressed send stream. This setting will not reduce the write size below a single block. Capped at a maximum of .Sy 32MB . . .It Sy zfs_override_estimate_recordsize Ns = Ns Sy 0 Ns | Ns 1 Pq ulong Setting this variable overrides the default logic for estimating block sizes when doing a .Nm zfs Cm send . The default heuristic is that the average block size will be the current recordsize. Override this value if most data in your dataset is not of that size and you require accurate zfs send size estimates. . .It Sy zfs_sync_pass_deferred_free Ns = Ns Sy 2 Pq int Flushing of data to disk is done in passes. Defer frees starting in this pass. . .It Sy zfs_spa_discard_memory_limit Ns = Ns Sy 16777216 Ns B Po 16MB Pc Pq int Maximum memory used for prefetching a checkpoint's space map on each vdev while discarding the checkpoint. . .It Sy zfs_special_class_metadata_reserve_pct Ns = Ns Sy 25 Ns % Pq int Only allow small data blocks to be allocated on the special and dedup vdev types when the available free space percentage on these vdevs exceeds this value. This ensures reserved space is available for pool metadata as the special vdevs approach capacity. . .It Sy zfs_sync_pass_dont_compress Ns = Ns Sy 8 Pq int Starting in this sync pass, disable compression (including of metadata). With the default setting, in practice, we don't have this many sync passes, so this has no effect. .Pp The original intent was that disabling compression would help the sync passes to converge. However, in practice, disabling compression increases the average number of sync passes; because when we turn compression off, many blocks' size will change, and thus we have to re-allocate (not overwrite) them. It also increases the number of .Em 128kB allocations (e.g. for indirect blocks and spacemaps) because these will not be compressed. The .Em 128kB allocations are especially detrimental to performance on highly fragmented systems, which may have very few free segments of this size, and may need to load new metaslabs to satisfy these allocations. . .It Sy zfs_sync_pass_rewrite Ns = Ns Sy 2 Pq int Rewrite new block pointers starting in this pass. . .It Sy zfs_sync_taskq_batch_pct Ns = Ns Sy 75 Ns % Pq int This controls the number of threads used by .Sy dp_sync_taskq . The default value of .Sy 75% will create a maximum of one thread per CPU. . .It Sy zfs_trim_extent_bytes_max Ns = Ns Sy 134217728 Ns B Po 128MB Pc Pq uint Maximum size of TRIM command. Larger ranges will be split into chunks no larger than this value before issuing. . .It Sy zfs_trim_extent_bytes_min Ns = Ns Sy 32768 Ns B Po 32kB Pc Pq uint Minimum size of TRIM commands. TRIM ranges smaller than this will be skipped, unless they're part of a larger range which was chunked. This is done because it's common for these small TRIMs to negatively impact overall performance. . .It Sy zfs_trim_metaslab_skip Ns = Ns Sy 0 Ns | Ns 1 Pq uint Skip uninitialized metaslabs during the TRIM process. This option is useful for pools constructed from large thinly-provisioned devices where TRIM operations are slow. As a pool ages, an increasing fraction of the pool's metaslabs will be initialized, progressively degrading the usefulness of this option. This setting is stored when starting a manual TRIM and will persist for the duration of the requested TRIM. . .It Sy zfs_trim_queue_limit Ns = Ns Sy 10 Pq uint Maximum number of queued TRIMs outstanding per leaf vdev. The number of concurrent TRIM commands issued to the device is controlled by .Sy zfs_vdev_trim_min_active No and Sy zfs_vdev_trim_max_active . . .It Sy zfs_trim_txg_batch Ns = Ns Sy 32 Pq uint The number of transaction groups' worth of frees which should be aggregated before TRIM operations are issued to the device. This setting represents a trade-off between issuing larger, more efficient TRIM operations and the delay before the recently trimmed space is available for use by the device. .Pp Increasing this value will allow frees to be aggregated for a longer time. This will result is larger TRIM operations and potentially increased memory usage. Decreasing this value will have the opposite effect. The default of .Sy 32 was determined to be a reasonable compromise. . .It Sy zfs_txg_history Ns = Ns Sy 0 Pq int Historical statistics for this many latest TXGs will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /TXGs . . .It Sy zfs_txg_timeout Ns = Ns Sy 5 Ns s Pq int Flush dirty data to disk at least every this many seconds (maximum TXG duration). . .It Sy zfs_vdev_aggregate_trim Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow TRIM I/Os to be aggregated. This is normally not helpful because the extents to be trimmed will have been already been aggregated by the metaslab. This option is provided for debugging and performance analysis. . .It Sy zfs_vdev_aggregation_limit Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq int Max vdev I/O aggregation size. . .It Sy zfs_vdev_aggregation_limit_non_rotating Ns = Ns Sy 131072 Ns B Po 128kB Pc Pq int Max vdev I/O aggregation size for non-rotating media. . .It Sy zfs_vdev_cache_bshift Ns = Ns Sy 16 Po 64kB Pc Pq int Shift size to inflate reads to. . .It Sy zfs_vdev_cache_max Ns = Ns Sy 16384 Ns B Po 16kB Pc Pq int Inflate reads smaller than this value to meet the .Sy zfs_vdev_cache_bshift size .Pq default Sy 64kB . . .It Sy zfs_vdev_cache_size Ns = Ns Sy 0 Pq int Total size of the per-disk cache in bytes. .Pp Currently this feature is disabled, as it has been found to not be helpful for performance and in some cases harmful. . .It Sy zfs_vdev_mirror_rotating_inc Ns = Ns Sy 0 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation immediately follows its predecessor on rotational vdevs for the purpose of making decisions based on load. . .It Sy zfs_vdev_mirror_rotating_seek_inc Ns = Ns Sy 5 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation lacks locality as defined by .Sy zfs_vdev_mirror_rotating_seek_offset . Operations within this that are not immediately following the previous operation are incremented by half. . .It Sy zfs_vdev_mirror_rotating_seek_offset Ns = Ns Sy 1048576 Ns B Po 1MB Pc Pq int The maximum distance for the last queued I/O operation in which the balancing algorithm considers an operation to have locality. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_mirror_non_rotating_inc Ns = Ns Sy 0 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member on non-rotational vdevs when I/O operations do not immediately follow one another. . .It Sy zfs_vdev_mirror_non_rotating_seek_inc Ns = Ns Sy 1 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation lacks locality as defined by the .Sy zfs_vdev_mirror_rotating_seek_offset . Operations within this that are not immediately following the previous operation are incremented by half. . .It Sy zfs_vdev_read_gap_limit Ns = Ns Sy 32768 Ns B Po 32kB Pc Pq int Aggregate read I/O operations if the on-disk gap between them is within this threshold. . .It Sy zfs_vdev_write_gap_limit Ns = Ns Sy 4096 Ns B Po 4kB Pc Pq int Aggregate write I/O operations if the on-disk gap between them is within this threshold. . .It Sy zfs_vdev_raidz_impl Ns = Ns Sy fastest Pq string Select the raidz parity implementation to use. .Pp Variants that don't depend on CPU-specific features may be selected on module load, as they are supported on all systems. The remaining options may only be set after the module is loaded, as they are available only if the implementations are compiled in and supported on the running system. .Pp Once the module is loaded, .Pa /sys/module/zfs/parameters/zfs_vdev_raidz_impl will show the available options, with the currently selected one enclosed in square brackets. .Pp .TS lb l l . fastest selected by built-in benchmark original original implementation scalar scalar implementation sse2 SSE2 instruction set 64-bit x86 ssse3 SSSE3 instruction set 64-bit x86 avx2 AVX2 instruction set 64-bit x86 avx512f AVX512F instruction set 64-bit x86 avx512bw AVX512F & AVX512BW instruction sets 64-bit x86 aarch64_neon NEON Aarch64/64-bit ARMv8 aarch64_neonx2 NEON with more unrolling Aarch64/64-bit ARMv8 powerpc_altivec Altivec PowerPC .TE . .It Sy zfs_vdev_scheduler Pq charp .Sy DEPRECATED . Prints warning to kernel log for compatibility. . .It Sy zfs_zevent_len_max Ns = Ns Sy 512 Pq int Max event queue length. Events in the queue can be viewed with .Xr zpool-events 8 . . .It Sy zfs_zevent_retain_max Ns = Ns Sy 2000 Pq int Maximum recent zevent records to retain for duplicate checking. Setting this to .Sy 0 disables duplicate detection. . .It Sy zfs_zevent_retain_expire_secs Ns = Ns Sy 900 Ns s Po 15min Pc Pq int Lifespan for a recent ereport that was retained for duplicate checking. . .It Sy zfs_zil_clean_taskq_maxalloc Ns = Ns Sy 1048576 Pq int The maximum number of taskq entries that are allowed to be cached. When this limit is exceeded transaction records (itxs) will be cleaned synchronously. . .It Sy zfs_zil_clean_taskq_minalloc Ns = Ns Sy 1024 Pq int The number of taskq entries that are pre-populated when the taskq is first created and are immediately available for use. . .It Sy zfs_zil_clean_taskq_nthr_pct Ns = Ns Sy 100 Ns % Pq int This controls the number of threads used by .Sy dp_zil_clean_taskq . The default value of .Sy 100% will create a maximum of one thread per cpu. . .It Sy zil_maxblocksize Ns = Ns Sy 131072 Ns B Po 128kB Pc Pq int This sets the maximum block size used by the ZIL. On very fragmented pools, lowering this .Pq typically to Sy 36kB can improve performance. . .It Sy zil_nocacheflush Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable the cache flush commands that are normally sent to disk by the ZIL after an LWB write has completed. Setting this will cause ZIL corruption on power loss if a volatile out-of-order write cache is enabled. . .It Sy zil_replay_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable intent logging replay. Can be disabled for recovery from corrupted ZIL. . .It Sy zil_slog_bulk Ns = Ns Sy 786432 Ns B Po 768kB Pc Pq ulong Limit SLOG write size per commit executed with synchronous priority. Any writes above that will be executed with lower (asynchronous) priority to limit potential SLOG device abuse by single active ZIL writer. . .It Sy zfs_embedded_slog_min_ms Ns = Ns Sy 64 Pq int Usually, one metaslab from each normal-class vdev is dedicated for use by the ZIL to log synchronous writes. However, if there are fewer than .Sy zfs_embedded_slog_min_ms metaslabs in the vdev, this functionality is disabled. This ensures that we don't set aside an unreasonable amount of space for the ZIL. . .It Sy zio_deadman_log_all Ns = Ns Sy 0 Ns | Ns 1 Pq int If non-zero, the zio deadman will produce debugging messages .Pq see Sy zfs_dbgmsg_enable for all zios, rather than only for leaf zios possessing a vdev. This is meant to be used by developers to gain diagnostic information for hang conditions which don't involve a mutex or other locking primitive: typically conditions in which a thread in the zio pipeline is looping indefinitely. . .It Sy zio_slow_io_ms Ns = Ns Sy 30000 Ns ms Po 30s Pc Pq int When an I/O operation takes more than this much time to complete, it's marked as slow. Each slow operation causes a delay zevent. Slow I/O counters can be seen with .Nm zpool Cm status Fl s . . .It Sy zio_dva_throttle_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Throttle block allocations in the I/O pipeline. This allows for dynamic allocation distribution when devices are imbalanced. When enabled, the maximum number of pending allocations per top-level vdev is limited by .Sy zfs_vdev_queue_depth_pct . . .It Sy zio_requeue_io_start_cut_in_line Ns = Ns Sy 0 Ns | Ns 1 Pq int Prioritize requeued I/O. . .It Sy zio_taskq_batch_pct Ns = Ns Sy 80 Ns % Pq uint Percentage of online CPUs which will run a worker thread for I/O. These workers are responsible for I/O work such as compression and checksum calculations. Fractional number of CPUs will be rounded down. .Pp The default value of .Sy 80% was chosen to avoid using all CPUs which can result in latency issues and inconsistent application performance, especially when slower compression and/or checksumming is enabled. . .It Sy zio_taskq_batch_tpq Ns = Ns Sy 0 Pq uint Number of worker threads per taskq. Lower values improve I/O ordering and CPU utilization, while higher reduces lock contention. .Pp If .Sy 0 , generate a system-dependent value close to 6 threads per taskq. . .It Sy zvol_inhibit_dev Ns = Ns Sy 0 Ns | Ns 1 Pq uint Do not create zvol device nodes. This may slightly improve startup time on systems with a very large number of zvols. . .It Sy zvol_major Ns = Ns Sy 230 Pq uint Major number for zvol block devices. . .It Sy zvol_max_discard_blocks Ns = Ns Sy 16384 Pq ulong Discard (TRIM) operations done on zvols will be done in batches of this many blocks, where block size is determined by the .Sy volblocksize property of a zvol. . .It Sy zvol_prefetch_bytes Ns = Ns Sy 131072 Ns B Po 128kB Pc Pq uint When adding a zvol to the system, prefetch this many bytes from the start and end of the volume. Prefetching these regions of the volume is desirable, because they are likely to be accessed immediately by .Xr blkid 8 or the kernel partitioner. . .It Sy zvol_request_sync Ns = Ns Sy 0 Ns | Ns 1 Pq uint When processing I/O requests for a zvol, submit them synchronously. This effectively limits the queue depth to .Em 1 for each I/O submitter. When unset, requests are handled asynchronously by a thread pool. The number of requests which can be handled concurrently is controlled by .Sy zvol_threads . . .It Sy zvol_threads Ns = Ns Sy 32 Pq uint Max number of threads which can handle zvol I/O requests concurrently. . .It Sy zvol_volmode Ns = Ns Sy 1 Pq uint Defines zvol block devices behaviour when .Sy volmode Ns = Ns Sy default : .Bl -tag -compact -offset 4n -width "a" .It Sy 1 .No equivalent to Sy full .It Sy 2 .No equivalent to Sy dev .It Sy 3 .No equivalent to Sy none .El .El . .Sh ZFS I/O SCHEDULER ZFS issues I/O operations to leaf vdevs to satisfy and complete I/O operations. The scheduler determines when and in what order those operations are issued. The scheduler divides operations into five I/O classes, prioritized in the following order: sync read, sync write, async read, async write, and scrub/resilver. Each queue defines the minimum and maximum number of concurrent operations that may be issued to the device. In addition, the device has an aggregate maximum, .Sy zfs_vdev_max_active . Note that the sum of the per-queue minima must not exceed the aggregate maximum. If the sum of the per-queue maxima exceeds the aggregate maximum, then the number of active operations may reach .Sy zfs_vdev_max_active , in which case no further operations will be issued, regardless of whether all per-queue minima have been met. .Pp For many physical devices, throughput increases with the number of concurrent operations, but latency typically suffers. Furthermore, physical devices typically have a limit at which more concurrent operations have no effect on throughput or can actually cause it to decrease. .Pp The scheduler selects the next operation to issue by first looking for an I/O class whose minimum has not been satisfied. Once all are satisfied and the aggregate maximum has not been hit, the scheduler looks for classes whose maximum has not been satisfied. Iteration through the I/O classes is done in the order specified above. No further operations are issued if the aggregate maximum number of concurrent operations has been hit, or if there are no operations queued for an I/O class that has not hit its maximum. Every time an I/O operation is queued or an operation completes, the scheduler looks for new operations to issue. .Pp In general, smaller .Sy max_active Ns s will lead to lower latency of synchronous operations. Larger .Sy max_active Ns s may lead to higher overall throughput, depending on underlying storage. .Pp The ratio of the queues' .Sy max_active Ns s determines the balance of performance between reads, writes, and scrubs. For example, increasing .Sy zfs_vdev_scrub_max_active will cause the scrub or resilver to complete more quickly, but reads and writes to have higher latency and lower throughput. .Pp All I/O classes have a fixed maximum number of outstanding operations, except for the async write class. Asynchronous writes represent the data that is committed to stable storage during the syncing stage for transaction groups. Transaction groups enter the syncing state periodically, so the number of queued async writes will quickly burst up and then bleed down to zero. Rather than servicing them as quickly as possible, the I/O scheduler changes the maximum number of active async write operations according to the amount of dirty data in the pool. Since both throughput and latency typically increase with the number of concurrent operations issued to physical devices, reducing the burstiness in the number of concurrent operations also stabilizes the response time of operations from other – and in particular synchronous – queues. In broad strokes, the I/O scheduler will issue more concurrent operations from the async write queue as there's more dirty data in the pool. . .Ss Async Writes The number of concurrent operations issued for the async write I/O class follows a piece-wise linear function defined by a few adjustable points: .Bd -literal | o---------| <-- \fBzfs_vdev_async_write_max_active\fP ^ | /^ | | | / | | active | / | | I/O | / | | count | / | | | / | | |-------o | | <-- \fBzfs_vdev_async_write_min_active\fP 0|_______^______|_________| 0% | | 100% of \fBzfs_dirty_data_max\fP | | | `-- \fBzfs_vdev_async_write_active_max_dirty_percent\fP `--------- \fBzfs_vdev_async_write_active_min_dirty_percent\fP .Ed .Pp Until the amount of dirty data exceeds a minimum percentage of the dirty data allowed in the pool, the I/O scheduler will limit the number of concurrent operations to the minimum. As that threshold is crossed, the number of concurrent operations issued increases linearly to the maximum at the specified maximum percentage of the dirty data allowed in the pool. .Pp Ideally, the amount of dirty data on a busy pool will stay in the sloped part of the function between .Sy zfs_vdev_async_write_active_min_dirty_percent and .Sy zfs_vdev_async_write_active_max_dirty_percent . If it exceeds the maximum percentage, this indicates that the rate of incoming data is greater than the rate that the backend storage can handle. In this case, we must further throttle incoming writes, as described in the next section. . .Sh ZFS TRANSACTION DELAY We delay transactions when we've determined that the backend storage isn't able to accommodate the rate of incoming writes. .Pp If there is already a transaction waiting, we delay relative to when that transaction will finish waiting. This way the calculated delay time is independent of the number of threads concurrently executing transactions. .Pp If we are the only waiter, wait relative to when the transaction started, rather than the current time. This credits the transaction for "time already served", e.g. reading indirect blocks. .Pp The minimum time for a transaction to take is calculated as .Dl min_time = min( Ns Sy zfs_delay_scale No * (dirty - min) / (max - dirty), 100ms) .Pp The delay has two degrees of freedom that can be adjusted via tunables. The percentage of dirty data at which we start to delay is defined by .Sy zfs_delay_min_dirty_percent . This should typically be at or above .Sy zfs_vdev_async_write_active_max_dirty_percent , so that we only start to delay after writing at full speed has failed to keep up with the incoming write rate. The scale of the curve is defined by .Sy zfs_delay_scale . Roughly speaking, this variable determines the amount of delay at the midpoint of the curve. .Bd -literal delay 10ms +-------------------------------------------------------------*+ | *| 9ms + *+ | *| 8ms + *+ | * | 7ms + * + | * | 6ms + * + | * | 5ms + * + | * | 4ms + * + | * | 3ms + * + | * | 2ms + (midpoint) * + | | ** | 1ms + v *** + | \fBzfs_delay_scale\fP ----------> ******** | 0 +-------------------------------------*********----------------+ 0% <- \fBzfs_dirty_data_max\fP -> 100% .Ed .Pp Note, that since the delay is added to the outstanding time remaining on the most recent transaction it's effectively the inverse of IOPS. Here, the midpoint of .Em 500us translates to .Em 2000 IOPS . The shape of the curve was chosen such that small changes in the amount of accumulated dirty data in the first three quarters of the curve yield relatively small differences in the amount of delay. .Pp The effects can be easier to understand when the amount of delay is represented on a logarithmic scale: .Bd -literal delay 100ms +-------------------------------------------------------------++ + + | | + *+ 10ms + *+ + ** + | (midpoint) ** | + | ** + 1ms + v **** + + \fBzfs_delay_scale\fP ----------> ***** + | **** | + **** + 100us + ** + + * + | * | + * + 10us + * + + + | | + + +--------------------------------------------------------------+ 0% <- \fBzfs_dirty_data_max\fP -> 100% .Ed .Pp Note here that only as the amount of dirty data approaches its limit does the delay start to increase rapidly. The goal of a properly tuned system should be to keep the amount of dirty data out of that range by first ensuring that the appropriate limits are set for the I/O scheduler to reach optimal throughput on the back-end storage, and then by changing the value of .Sy zfs_delay_scale to increase the steepness of the curve. diff --git a/module/zfs/dmu.c b/module/zfs/dmu.c index 1c47430953b1..8302d506146f 100644 --- a/module/zfs/dmu.c +++ b/module/zfs/dmu.c @@ -1,2359 +1,2358 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2020 by Delphix. All rights reserved. * Copyright (c) 2013 by Saso Kiselkov. All rights reserved. * Copyright (c) 2013, Joyent, Inc. All rights reserved. * Copyright (c) 2016, Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2015 by Chunwei Chen. All rights reserved. * Copyright (c) 2019 Datto Inc. * Copyright (c) 2019, Klara Inc. * Copyright (c) 2019, Allan Jude */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef _KERNEL #include #include #endif /* * Enable/disable nopwrite feature. */ int zfs_nopwrite_enabled = 1; /* * Tunable to control percentage of dirtied L1 blocks from frees allowed into * one TXG. After this threshold is crossed, additional dirty blocks from frees * will wait until the next TXG. * A value of zero will disable this throttle. */ unsigned long zfs_per_txg_dirty_frees_percent = 5; /* * Enable/disable forcing txg sync when dirty in dmu_offset_next. */ int zfs_dmu_offset_next_sync = 0; /* * Limit the amount we can prefetch with one call to this amount. This * helps to limit the amount of memory that can be used by prefetching. * Larger objects should be prefetched a bit at a time. */ int dmu_prefetch_max = 8 * SPA_MAXBLOCKSIZE; const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES] = { {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "unallocated" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "object directory" }, {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "object array" }, {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "packed nvlist" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "packed nvlist size" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj header" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA space map header" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA space map" }, {DMU_BSWAP_UINT64, TRUE, FALSE, TRUE, "ZIL intent log" }, {DMU_BSWAP_DNODE, TRUE, FALSE, TRUE, "DMU dnode" }, {DMU_BSWAP_OBJSET, TRUE, TRUE, FALSE, "DMU objset" }, {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL directory" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL directory child map"}, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dataset snap map" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL props" }, {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL dataset" }, {DMU_BSWAP_ZNODE, TRUE, FALSE, FALSE, "ZFS znode" }, {DMU_BSWAP_OLDACL, TRUE, FALSE, TRUE, "ZFS V0 ACL" }, {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "ZFS plain file" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS directory" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "ZFS master node" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS delete queue" }, {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "zvol object" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "zvol prop" }, {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "other uint8[]" }, {DMU_BSWAP_UINT64, FALSE, FALSE, TRUE, "other uint64[]" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "other ZAP" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "persistent error log" }, {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "SPA history" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA history offsets" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "Pool properties" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL permissions" }, {DMU_BSWAP_ACL, TRUE, FALSE, TRUE, "ZFS ACL" }, {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "ZFS SYSACL" }, {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "FUID table" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "FUID table size" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dataset next clones"}, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "scan work queue" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS user/group/project used" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS user/group/project quota"}, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "snapshot refcount tags"}, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "DDT ZAP algorithm" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "DDT statistics" }, {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "System attributes" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA master node" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA attr registration" }, {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA attr layouts" }, {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "scan translations" }, {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "deduplicated block" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL deadlist map" }, {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL deadlist map hdr" }, {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dir clones" }, {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj subobj" } }; const dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS] = { { byteswap_uint8_array, "uint8" }, { byteswap_uint16_array, "uint16" }, { byteswap_uint32_array, "uint32" }, { byteswap_uint64_array, "uint64" }, { zap_byteswap, "zap" }, { dnode_buf_byteswap, "dnode" }, { dmu_objset_byteswap, "objset" }, { zfs_znode_byteswap, "znode" }, { zfs_oldacl_byteswap, "oldacl" }, { zfs_acl_byteswap, "acl" } }; static int dmu_buf_hold_noread_by_dnode(dnode_t *dn, uint64_t offset, void *tag, dmu_buf_t **dbp) { uint64_t blkid; dmu_buf_impl_t *db; rw_enter(&dn->dn_struct_rwlock, RW_READER); blkid = dbuf_whichblock(dn, 0, offset); db = dbuf_hold(dn, blkid, tag); rw_exit(&dn->dn_struct_rwlock); if (db == NULL) { *dbp = NULL; return (SET_ERROR(EIO)); } *dbp = &db->db; return (0); } int dmu_buf_hold_noread(objset_t *os, uint64_t object, uint64_t offset, void *tag, dmu_buf_t **dbp) { dnode_t *dn; uint64_t blkid; dmu_buf_impl_t *db; int err; err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); rw_enter(&dn->dn_struct_rwlock, RW_READER); blkid = dbuf_whichblock(dn, 0, offset); db = dbuf_hold(dn, blkid, tag); rw_exit(&dn->dn_struct_rwlock); dnode_rele(dn, FTAG); if (db == NULL) { *dbp = NULL; return (SET_ERROR(EIO)); } *dbp = &db->db; return (err); } int dmu_buf_hold_by_dnode(dnode_t *dn, uint64_t offset, void *tag, dmu_buf_t **dbp, int flags) { int err; int db_flags = DB_RF_CANFAIL; if (flags & DMU_READ_NO_PREFETCH) db_flags |= DB_RF_NOPREFETCH; if (flags & DMU_READ_NO_DECRYPT) db_flags |= DB_RF_NO_DECRYPT; err = dmu_buf_hold_noread_by_dnode(dn, offset, tag, dbp); if (err == 0) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)(*dbp); err = dbuf_read(db, NULL, db_flags); if (err != 0) { dbuf_rele(db, tag); *dbp = NULL; } } return (err); } int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, void *tag, dmu_buf_t **dbp, int flags) { int err; int db_flags = DB_RF_CANFAIL; if (flags & DMU_READ_NO_PREFETCH) db_flags |= DB_RF_NOPREFETCH; if (flags & DMU_READ_NO_DECRYPT) db_flags |= DB_RF_NO_DECRYPT; err = dmu_buf_hold_noread(os, object, offset, tag, dbp); if (err == 0) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)(*dbp); err = dbuf_read(db, NULL, db_flags); if (err != 0) { dbuf_rele(db, tag); *dbp = NULL; } } return (err); } int dmu_bonus_max(void) { return (DN_OLD_MAX_BONUSLEN); } int dmu_set_bonus(dmu_buf_t *db_fake, int newsize, dmu_tx_t *tx) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; int error; DB_DNODE_ENTER(db); dn = DB_DNODE(db); if (dn->dn_bonus != db) { error = SET_ERROR(EINVAL); } else if (newsize < 0 || newsize > db_fake->db_size) { error = SET_ERROR(EINVAL); } else { dnode_setbonuslen(dn, newsize, tx); error = 0; } DB_DNODE_EXIT(db); return (error); } int dmu_set_bonustype(dmu_buf_t *db_fake, dmu_object_type_t type, dmu_tx_t *tx) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; int error; DB_DNODE_ENTER(db); dn = DB_DNODE(db); if (!DMU_OT_IS_VALID(type)) { error = SET_ERROR(EINVAL); } else if (dn->dn_bonus != db) { error = SET_ERROR(EINVAL); } else { dnode_setbonus_type(dn, type, tx); error = 0; } DB_DNODE_EXIT(db); return (error); } dmu_object_type_t dmu_get_bonustype(dmu_buf_t *db_fake) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; dmu_object_type_t type; DB_DNODE_ENTER(db); dn = DB_DNODE(db); type = dn->dn_bonustype; DB_DNODE_EXIT(db); return (type); } int dmu_rm_spill(objset_t *os, uint64_t object, dmu_tx_t *tx) { dnode_t *dn; int error; error = dnode_hold(os, object, FTAG, &dn); dbuf_rm_spill(dn, tx); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); dnode_rm_spill(dn, tx); rw_exit(&dn->dn_struct_rwlock); dnode_rele(dn, FTAG); return (error); } /* * Lookup and hold the bonus buffer for the provided dnode. If the dnode * has not yet been allocated a new bonus dbuf a will be allocated. * Returns ENOENT, EIO, or 0. */ int dmu_bonus_hold_by_dnode(dnode_t *dn, void *tag, dmu_buf_t **dbp, uint32_t flags) { dmu_buf_impl_t *db; int error; uint32_t db_flags = DB_RF_MUST_SUCCEED; if (flags & DMU_READ_NO_PREFETCH) db_flags |= DB_RF_NOPREFETCH; if (flags & DMU_READ_NO_DECRYPT) db_flags |= DB_RF_NO_DECRYPT; rw_enter(&dn->dn_struct_rwlock, RW_READER); if (dn->dn_bonus == NULL) { rw_exit(&dn->dn_struct_rwlock); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); if (dn->dn_bonus == NULL) dbuf_create_bonus(dn); } db = dn->dn_bonus; /* as long as the bonus buf is held, the dnode will be held */ if (zfs_refcount_add(&db->db_holds, tag) == 1) { VERIFY(dnode_add_ref(dn, db)); atomic_inc_32(&dn->dn_dbufs_count); } /* * Wait to drop dn_struct_rwlock until after adding the bonus dbuf's * hold and incrementing the dbuf count to ensure that dnode_move() sees * a dnode hold for every dbuf. */ rw_exit(&dn->dn_struct_rwlock); error = dbuf_read(db, NULL, db_flags); if (error) { dnode_evict_bonus(dn); dbuf_rele(db, tag); *dbp = NULL; return (error); } *dbp = &db->db; return (0); } int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **dbp) { dnode_t *dn; int error; error = dnode_hold(os, object, FTAG, &dn); if (error) return (error); error = dmu_bonus_hold_by_dnode(dn, tag, dbp, DMU_READ_NO_PREFETCH); dnode_rele(dn, FTAG); return (error); } /* * returns ENOENT, EIO, or 0. * * This interface will allocate a blank spill dbuf when a spill blk * doesn't already exist on the dnode. * * if you only want to find an already existing spill db, then * dmu_spill_hold_existing() should be used. */ int dmu_spill_hold_by_dnode(dnode_t *dn, uint32_t flags, void *tag, dmu_buf_t **dbp) { dmu_buf_impl_t *db = NULL; int err; if ((flags & DB_RF_HAVESTRUCT) == 0) rw_enter(&dn->dn_struct_rwlock, RW_READER); db = dbuf_hold(dn, DMU_SPILL_BLKID, tag); if ((flags & DB_RF_HAVESTRUCT) == 0) rw_exit(&dn->dn_struct_rwlock); if (db == NULL) { *dbp = NULL; return (SET_ERROR(EIO)); } err = dbuf_read(db, NULL, flags); if (err == 0) *dbp = &db->db; else { dbuf_rele(db, tag); *dbp = NULL; } return (err); } int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)bonus; dnode_t *dn; int err; DB_DNODE_ENTER(db); dn = DB_DNODE(db); if (spa_version(dn->dn_objset->os_spa) < SPA_VERSION_SA) { err = SET_ERROR(EINVAL); } else { rw_enter(&dn->dn_struct_rwlock, RW_READER); if (!dn->dn_have_spill) { err = SET_ERROR(ENOENT); } else { err = dmu_spill_hold_by_dnode(dn, DB_RF_HAVESTRUCT | DB_RF_CANFAIL, tag, dbp); } rw_exit(&dn->dn_struct_rwlock); } DB_DNODE_EXIT(db); return (err); } int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, uint32_t flags, void *tag, dmu_buf_t **dbp) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)bonus; dnode_t *dn; int err; uint32_t db_flags = DB_RF_CANFAIL; if (flags & DMU_READ_NO_DECRYPT) db_flags |= DB_RF_NO_DECRYPT; DB_DNODE_ENTER(db); dn = DB_DNODE(db); err = dmu_spill_hold_by_dnode(dn, db_flags, tag, dbp); DB_DNODE_EXIT(db); return (err); } /* * Note: longer-term, we should modify all of the dmu_buf_*() interfaces * to take a held dnode rather than -- the lookup is wasteful, * and can induce severe lock contention when writing to several files * whose dnodes are in the same block. */ int dmu_buf_hold_array_by_dnode(dnode_t *dn, uint64_t offset, uint64_t length, boolean_t read, void *tag, int *numbufsp, dmu_buf_t ***dbpp, uint32_t flags) { dmu_buf_t **dbp; zstream_t *zs = NULL; uint64_t blkid, nblks, i; uint32_t dbuf_flags; int err; zio_t *zio = NULL; boolean_t missed = B_FALSE; ASSERT(length <= DMU_MAX_ACCESS); /* * Note: We directly notify the prefetch code of this read, so that * we can tell it about the multi-block read. dbuf_read() only knows * about the one block it is accessing. */ dbuf_flags = DB_RF_CANFAIL | DB_RF_NEVERWAIT | DB_RF_HAVESTRUCT | DB_RF_NOPREFETCH; rw_enter(&dn->dn_struct_rwlock, RW_READER); if (dn->dn_datablkshift) { int blkshift = dn->dn_datablkshift; nblks = (P2ROUNDUP(offset + length, 1ULL << blkshift) - P2ALIGN(offset, 1ULL << blkshift)) >> blkshift; } else { if (offset + length > dn->dn_datablksz) { zfs_panic_recover("zfs: accessing past end of object " "%llx/%llx (size=%u access=%llu+%llu)", (longlong_t)dn->dn_objset-> os_dsl_dataset->ds_object, (longlong_t)dn->dn_object, dn->dn_datablksz, (longlong_t)offset, (longlong_t)length); rw_exit(&dn->dn_struct_rwlock); return (SET_ERROR(EIO)); } nblks = 1; } dbp = kmem_zalloc(sizeof (dmu_buf_t *) * nblks, KM_SLEEP); if (read) zio = zio_root(dn->dn_objset->os_spa, NULL, NULL, ZIO_FLAG_CANFAIL); blkid = dbuf_whichblock(dn, 0, offset); if ((flags & DMU_READ_NO_PREFETCH) == 0 && DNODE_META_IS_CACHEABLE(dn) && length <= zfetch_array_rd_sz) { /* * Prepare the zfetch before initiating the demand reads, so * that if multiple threads block on same indirect block, we * base predictions on the original less racy request order. */ zs = dmu_zfetch_prepare(&dn->dn_zfetch, blkid, nblks, read && DNODE_IS_CACHEABLE(dn), B_TRUE); } for (i = 0; i < nblks; i++) { dmu_buf_impl_t *db = dbuf_hold(dn, blkid + i, tag); if (db == NULL) { if (zs) dmu_zfetch_run(zs, missed, B_TRUE); rw_exit(&dn->dn_struct_rwlock); dmu_buf_rele_array(dbp, nblks, tag); if (read) zio_nowait(zio); return (SET_ERROR(EIO)); } /* * Initiate async demand data read. * We check the db_state after calling dbuf_read() because * (1) dbuf_read() may change the state to CACHED due to a * hit in the ARC, and (2) on a cache miss, a child will * have been added to "zio" but not yet completed, so the * state will not yet be CACHED. */ if (read) { (void) dbuf_read(db, zio, dbuf_flags); if (db->db_state != DB_CACHED) missed = B_TRUE; } dbp[i] = &db->db; } if (!read) zfs_racct_write(length, nblks); if (zs) dmu_zfetch_run(zs, missed, B_TRUE); rw_exit(&dn->dn_struct_rwlock); if (read) { /* wait for async read i/o */ err = zio_wait(zio); if (err) { dmu_buf_rele_array(dbp, nblks, tag); return (err); } /* wait for other io to complete */ for (i = 0; i < nblks; i++) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)dbp[i]; mutex_enter(&db->db_mtx); while (db->db_state == DB_READ || db->db_state == DB_FILL) cv_wait(&db->db_changed, &db->db_mtx); if (db->db_state == DB_UNCACHED) err = SET_ERROR(EIO); mutex_exit(&db->db_mtx); if (err) { dmu_buf_rele_array(dbp, nblks, tag); return (err); } } } *numbufsp = nblks; *dbpp = dbp; return (0); } static int dmu_buf_hold_array(objset_t *os, uint64_t object, uint64_t offset, uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); err = dmu_buf_hold_array_by_dnode(dn, offset, length, read, tag, numbufsp, dbpp, DMU_READ_PREFETCH); dnode_rele(dn, FTAG); return (err); } int dmu_buf_hold_array_by_bonus(dmu_buf_t *db_fake, uint64_t offset, uint64_t length, boolean_t read, void *tag, int *numbufsp, dmu_buf_t ***dbpp) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; int err; DB_DNODE_ENTER(db); dn = DB_DNODE(db); err = dmu_buf_hold_array_by_dnode(dn, offset, length, read, tag, numbufsp, dbpp, DMU_READ_PREFETCH); DB_DNODE_EXIT(db); return (err); } void dmu_buf_rele_array(dmu_buf_t **dbp_fake, int numbufs, void *tag) { int i; dmu_buf_impl_t **dbp = (dmu_buf_impl_t **)dbp_fake; if (numbufs == 0) return; for (i = 0; i < numbufs; i++) { if (dbp[i]) dbuf_rele(dbp[i], tag); } kmem_free(dbp, sizeof (dmu_buf_t *) * numbufs); } /* * Issue prefetch i/os for the given blocks. If level is greater than 0, the * indirect blocks prefetched will be those that point to the blocks containing * the data starting at offset, and continuing to offset + len. * * Note that if the indirect blocks above the blocks being prefetched are not * in cache, they will be asynchronously read in. */ void dmu_prefetch(objset_t *os, uint64_t object, int64_t level, uint64_t offset, uint64_t len, zio_priority_t pri) { dnode_t *dn; uint64_t blkid; int nblks, err; if (len == 0) { /* they're interested in the bonus buffer */ dn = DMU_META_DNODE(os); if (object == 0 || object >= DN_MAX_OBJECT) return; rw_enter(&dn->dn_struct_rwlock, RW_READER); blkid = dbuf_whichblock(dn, level, object * sizeof (dnode_phys_t)); dbuf_prefetch(dn, level, blkid, pri, 0); rw_exit(&dn->dn_struct_rwlock); return; } /* * See comment before the definition of dmu_prefetch_max. */ len = MIN(len, dmu_prefetch_max); /* * XXX - Note, if the dnode for the requested object is not * already cached, we will do a *synchronous* read in the * dnode_hold() call. The same is true for any indirects. */ err = dnode_hold(os, object, FTAG, &dn); if (err != 0) return; /* * offset + len - 1 is the last byte we want to prefetch for, and offset * is the first. Then dbuf_whichblk(dn, level, off + len - 1) is the * last block we want to prefetch, and dbuf_whichblock(dn, level, * offset) is the first. Then the number we need to prefetch is the * last - first + 1. */ rw_enter(&dn->dn_struct_rwlock, RW_READER); if (level > 0 || dn->dn_datablkshift != 0) { nblks = dbuf_whichblock(dn, level, offset + len - 1) - dbuf_whichblock(dn, level, offset) + 1; } else { nblks = (offset < dn->dn_datablksz); } if (nblks != 0) { blkid = dbuf_whichblock(dn, level, offset); for (int i = 0; i < nblks; i++) dbuf_prefetch(dn, level, blkid + i, pri, 0); } rw_exit(&dn->dn_struct_rwlock); dnode_rele(dn, FTAG); } /* * Get the next "chunk" of file data to free. We traverse the file from * the end so that the file gets shorter over time (if we crashes in the * middle, this will leave us in a better state). We find allocated file * data by simply searching the allocated level 1 indirects. * * On input, *start should be the first offset that does not need to be * freed (e.g. "offset + length"). On return, *start will be the first * offset that should be freed and l1blks is set to the number of level 1 * indirect blocks found within the chunk. */ static int get_next_chunk(dnode_t *dn, uint64_t *start, uint64_t minimum, uint64_t *l1blks) { uint64_t blks; uint64_t maxblks = DMU_MAX_ACCESS >> (dn->dn_indblkshift + 1); /* bytes of data covered by a level-1 indirect block */ uint64_t iblkrange = (uint64_t)dn->dn_datablksz * EPB(dn->dn_indblkshift, SPA_BLKPTRSHIFT); ASSERT3U(minimum, <=, *start); /* * Check if we can free the entire range assuming that all of the * L1 blocks in this range have data. If we can, we use this * worst case value as an estimate so we can avoid having to look * at the object's actual data. */ uint64_t total_l1blks = (roundup(*start, iblkrange) - (minimum / iblkrange * iblkrange)) / iblkrange; if (total_l1blks <= maxblks) { *l1blks = total_l1blks; *start = minimum; return (0); } ASSERT(ISP2(iblkrange)); for (blks = 0; *start > minimum && blks < maxblks; blks++) { int err; /* * dnode_next_offset(BACKWARDS) will find an allocated L1 * indirect block at or before the input offset. We must * decrement *start so that it is at the end of the region * to search. */ (*start)--; err = dnode_next_offset(dn, DNODE_FIND_BACKWARDS, start, 2, 1, 0); /* if there are no indirect blocks before start, we are done */ if (err == ESRCH) { *start = minimum; break; } else if (err != 0) { *l1blks = blks; return (err); } /* set start to the beginning of this L1 indirect */ *start = P2ALIGN(*start, iblkrange); } if (*start < minimum) *start = minimum; *l1blks = blks; return (0); } /* * If this objset is of type OST_ZFS return true if vfs's unmounted flag is set, * otherwise return false. * Used below in dmu_free_long_range_impl() to enable abort when unmounting */ /*ARGSUSED*/ static boolean_t dmu_objset_zfs_unmounting(objset_t *os) { #ifdef _KERNEL if (dmu_objset_type(os) == DMU_OST_ZFS) return (zfs_get_vfs_flag_unmounted(os)); #endif return (B_FALSE); } static int dmu_free_long_range_impl(objset_t *os, dnode_t *dn, uint64_t offset, uint64_t length) { uint64_t object_size; int err; uint64_t dirty_frees_threshold; dsl_pool_t *dp = dmu_objset_pool(os); if (dn == NULL) return (SET_ERROR(EINVAL)); object_size = (dn->dn_maxblkid + 1) * dn->dn_datablksz; if (offset >= object_size) return (0); if (zfs_per_txg_dirty_frees_percent <= 100) dirty_frees_threshold = zfs_per_txg_dirty_frees_percent * zfs_dirty_data_max / 100; else dirty_frees_threshold = zfs_dirty_data_max / 20; if (length == DMU_OBJECT_END || offset + length > object_size) length = object_size - offset; while (length != 0) { uint64_t chunk_end, chunk_begin, chunk_len; uint64_t l1blks; dmu_tx_t *tx; if (dmu_objset_zfs_unmounting(dn->dn_objset)) return (SET_ERROR(EINTR)); chunk_end = chunk_begin = offset + length; /* move chunk_begin backwards to the beginning of this chunk */ err = get_next_chunk(dn, &chunk_begin, offset, &l1blks); if (err) return (err); ASSERT3U(chunk_begin, >=, offset); ASSERT3U(chunk_begin, <=, chunk_end); chunk_len = chunk_end - chunk_begin; tx = dmu_tx_create(os); dmu_tx_hold_free(tx, dn->dn_object, chunk_begin, chunk_len); /* * Mark this transaction as typically resulting in a net * reduction in space used. */ dmu_tx_mark_netfree(tx); err = dmu_tx_assign(tx, TXG_WAIT); if (err) { dmu_tx_abort(tx); return (err); } uint64_t txg = dmu_tx_get_txg(tx); mutex_enter(&dp->dp_lock); uint64_t long_free_dirty = dp->dp_long_free_dirty_pertxg[txg & TXG_MASK]; mutex_exit(&dp->dp_lock); /* * To avoid filling up a TXG with just frees, wait for * the next TXG to open before freeing more chunks if * we have reached the threshold of frees. */ if (dirty_frees_threshold != 0 && long_free_dirty >= dirty_frees_threshold) { DMU_TX_STAT_BUMP(dmu_tx_dirty_frees_delay); dmu_tx_commit(tx); txg_wait_open(dp, 0, B_TRUE); continue; } /* * In order to prevent unnecessary write throttling, for each * TXG, we track the cumulative size of L1 blocks being dirtied * in dnode_free_range() below. We compare this number to a * tunable threshold, past which we prevent new L1 dirty freeing * blocks from being added into the open TXG. See * dmu_free_long_range_impl() for details. The threshold * prevents write throttle activation due to dirty freeing L1 * blocks taking up a large percentage of zfs_dirty_data_max. */ mutex_enter(&dp->dp_lock); dp->dp_long_free_dirty_pertxg[txg & TXG_MASK] += l1blks << dn->dn_indblkshift; mutex_exit(&dp->dp_lock); DTRACE_PROBE3(free__long__range, uint64_t, long_free_dirty, uint64_t, chunk_len, uint64_t, txg); dnode_free_range(dn, chunk_begin, chunk_len, tx); dmu_tx_commit(tx); length -= chunk_len; } return (0); } int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, uint64_t length) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err != 0) return (err); err = dmu_free_long_range_impl(os, dn, offset, length); /* * It is important to zero out the maxblkid when freeing the entire * file, so that (a) subsequent calls to dmu_free_long_range_impl() * will take the fast path, and (b) dnode_reallocate() can verify * that the entire file has been freed. */ if (err == 0 && offset == 0 && length == DMU_OBJECT_END) dn->dn_maxblkid = 0; dnode_rele(dn, FTAG); return (err); } int dmu_free_long_object(objset_t *os, uint64_t object) { dmu_tx_t *tx; int err; err = dmu_free_long_range(os, object, 0, DMU_OBJECT_END); if (err != 0) return (err); tx = dmu_tx_create(os); dmu_tx_hold_bonus(tx, object); dmu_tx_hold_free(tx, object, 0, DMU_OBJECT_END); dmu_tx_mark_netfree(tx); err = dmu_tx_assign(tx, TXG_WAIT); if (err == 0) { if (err == 0) err = dmu_object_free(os, object, tx); dmu_tx_commit(tx); } else { dmu_tx_abort(tx); } return (err); } int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, dmu_tx_t *tx) { dnode_t *dn; int err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); ASSERT(offset < UINT64_MAX); ASSERT(size == DMU_OBJECT_END || size <= UINT64_MAX - offset); dnode_free_range(dn, offset, size, tx); dnode_rele(dn, FTAG); return (0); } static int dmu_read_impl(dnode_t *dn, uint64_t offset, uint64_t size, void *buf, uint32_t flags) { dmu_buf_t **dbp; int numbufs, err = 0; /* * Deal with odd block sizes, where there can't be data past the first * block. If we ever do the tail block optimization, we will need to * handle that here as well. */ if (dn->dn_maxblkid == 0) { uint64_t newsz = offset > dn->dn_datablksz ? 0 : MIN(size, dn->dn_datablksz - offset); bzero((char *)buf + newsz, size - newsz); size = newsz; } while (size > 0) { uint64_t mylen = MIN(size, DMU_MAX_ACCESS / 2); int i; /* * NB: we could do this block-at-a-time, but it's nice * to be reading in parallel. */ err = dmu_buf_hold_array_by_dnode(dn, offset, mylen, TRUE, FTAG, &numbufs, &dbp, flags); if (err) break; for (i = 0; i < numbufs; i++) { uint64_t tocpy; int64_t bufoff; dmu_buf_t *db = dbp[i]; ASSERT(size > 0); bufoff = offset - db->db_offset; tocpy = MIN(db->db_size - bufoff, size); (void) memcpy(buf, (char *)db->db_data + bufoff, tocpy); offset += tocpy; size -= tocpy; buf = (char *)buf + tocpy; } dmu_buf_rele_array(dbp, numbufs, FTAG); } return (err); } int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, void *buf, uint32_t flags) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err != 0) return (err); err = dmu_read_impl(dn, offset, size, buf, flags); dnode_rele(dn, FTAG); return (err); } int dmu_read_by_dnode(dnode_t *dn, uint64_t offset, uint64_t size, void *buf, uint32_t flags) { return (dmu_read_impl(dn, offset, size, buf, flags)); } static void dmu_write_impl(dmu_buf_t **dbp, int numbufs, uint64_t offset, uint64_t size, const void *buf, dmu_tx_t *tx) { int i; for (i = 0; i < numbufs; i++) { uint64_t tocpy; int64_t bufoff; dmu_buf_t *db = dbp[i]; ASSERT(size > 0); bufoff = offset - db->db_offset; tocpy = MIN(db->db_size - bufoff, size); ASSERT(i == 0 || i == numbufs-1 || tocpy == db->db_size); if (tocpy == db->db_size) dmu_buf_will_fill(db, tx); else dmu_buf_will_dirty(db, tx); (void) memcpy((char *)db->db_data + bufoff, buf, tocpy); if (tocpy == db->db_size) dmu_buf_fill_done(db, tx); offset += tocpy; size -= tocpy; buf = (char *)buf + tocpy; } } void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, const void *buf, dmu_tx_t *tx) { dmu_buf_t **dbp; int numbufs; if (size == 0) return; VERIFY0(dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs, &dbp)); dmu_write_impl(dbp, numbufs, offset, size, buf, tx); dmu_buf_rele_array(dbp, numbufs, FTAG); } /* * Note: Lustre is an external consumer of this interface. */ void dmu_write_by_dnode(dnode_t *dn, uint64_t offset, uint64_t size, const void *buf, dmu_tx_t *tx) { dmu_buf_t **dbp; int numbufs; if (size == 0) return; VERIFY0(dmu_buf_hold_array_by_dnode(dn, offset, size, FALSE, FTAG, &numbufs, &dbp, DMU_READ_PREFETCH)); dmu_write_impl(dbp, numbufs, offset, size, buf, tx); dmu_buf_rele_array(dbp, numbufs, FTAG); } void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, dmu_tx_t *tx) { dmu_buf_t **dbp; int numbufs, i; if (size == 0) return; VERIFY(0 == dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs, &dbp)); for (i = 0; i < numbufs; i++) { dmu_buf_t *db = dbp[i]; dmu_buf_will_not_fill(db, tx); } dmu_buf_rele_array(dbp, numbufs, FTAG); } void dmu_write_embedded(objset_t *os, uint64_t object, uint64_t offset, void *data, uint8_t etype, uint8_t comp, int uncompressed_size, int compressed_size, int byteorder, dmu_tx_t *tx) { dmu_buf_t *db; ASSERT3U(etype, <, NUM_BP_EMBEDDED_TYPES); ASSERT3U(comp, <, ZIO_COMPRESS_FUNCTIONS); VERIFY0(dmu_buf_hold_noread(os, object, offset, FTAG, &db)); dmu_buf_write_embedded(db, data, (bp_embedded_type_t)etype, (enum zio_compress)comp, uncompressed_size, compressed_size, byteorder, tx); dmu_buf_rele(db, FTAG); } void dmu_redact(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, dmu_tx_t *tx) { int numbufs, i; dmu_buf_t **dbp; VERIFY0(dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs, &dbp)); for (i = 0; i < numbufs; i++) dmu_buf_redact(dbp[i], tx); dmu_buf_rele_array(dbp, numbufs, FTAG); } #ifdef _KERNEL int dmu_read_uio_dnode(dnode_t *dn, zfs_uio_t *uio, uint64_t size) { dmu_buf_t **dbp; int numbufs, i, err; /* * NB: we could do this block-at-a-time, but it's nice * to be reading in parallel. */ err = dmu_buf_hold_array_by_dnode(dn, zfs_uio_offset(uio), size, TRUE, FTAG, &numbufs, &dbp, 0); if (err) return (err); for (i = 0; i < numbufs; i++) { uint64_t tocpy; int64_t bufoff; dmu_buf_t *db = dbp[i]; ASSERT(size > 0); bufoff = zfs_uio_offset(uio) - db->db_offset; tocpy = MIN(db->db_size - bufoff, size); err = zfs_uio_fault_move((char *)db->db_data + bufoff, tocpy, UIO_READ, uio); if (err) break; size -= tocpy; } dmu_buf_rele_array(dbp, numbufs, FTAG); return (err); } /* * Read 'size' bytes into the uio buffer. * From object zdb->db_object. * Starting at zfs_uio_offset(uio). * * If the caller already has a dbuf in the target object * (e.g. its bonus buffer), this routine is faster than dmu_read_uio(), * because we don't have to find the dnode_t for the object. */ int dmu_read_uio_dbuf(dmu_buf_t *zdb, zfs_uio_t *uio, uint64_t size) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)zdb; dnode_t *dn; int err; if (size == 0) return (0); DB_DNODE_ENTER(db); dn = DB_DNODE(db); err = dmu_read_uio_dnode(dn, uio, size); DB_DNODE_EXIT(db); return (err); } /* * Read 'size' bytes into the uio buffer. * From the specified object * Starting at offset zfs_uio_offset(uio). */ int dmu_read_uio(objset_t *os, uint64_t object, zfs_uio_t *uio, uint64_t size) { dnode_t *dn; int err; if (size == 0) return (0); err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); err = dmu_read_uio_dnode(dn, uio, size); dnode_rele(dn, FTAG); return (err); } int dmu_write_uio_dnode(dnode_t *dn, zfs_uio_t *uio, uint64_t size, dmu_tx_t *tx) { dmu_buf_t **dbp; int numbufs; int err = 0; int i; err = dmu_buf_hold_array_by_dnode(dn, zfs_uio_offset(uio), size, FALSE, FTAG, &numbufs, &dbp, DMU_READ_PREFETCH); if (err) return (err); for (i = 0; i < numbufs; i++) { uint64_t tocpy; int64_t bufoff; dmu_buf_t *db = dbp[i]; ASSERT(size > 0); bufoff = zfs_uio_offset(uio) - db->db_offset; tocpy = MIN(db->db_size - bufoff, size); ASSERT(i == 0 || i == numbufs-1 || tocpy == db->db_size); if (tocpy == db->db_size) dmu_buf_will_fill(db, tx); else dmu_buf_will_dirty(db, tx); /* * XXX zfs_uiomove could block forever (eg.nfs-backed * pages). There needs to be a uiolockdown() function * to lock the pages in memory, so that zfs_uiomove won't * block. */ err = zfs_uio_fault_move((char *)db->db_data + bufoff, tocpy, UIO_WRITE, uio); if (tocpy == db->db_size) dmu_buf_fill_done(db, tx); if (err) break; size -= tocpy; } dmu_buf_rele_array(dbp, numbufs, FTAG); return (err); } /* * Write 'size' bytes from the uio buffer. * To object zdb->db_object. * Starting at offset zfs_uio_offset(uio). * * If the caller already has a dbuf in the target object * (e.g. its bonus buffer), this routine is faster than dmu_write_uio(), * because we don't have to find the dnode_t for the object. */ int dmu_write_uio_dbuf(dmu_buf_t *zdb, zfs_uio_t *uio, uint64_t size, dmu_tx_t *tx) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)zdb; dnode_t *dn; int err; if (size == 0) return (0); DB_DNODE_ENTER(db); dn = DB_DNODE(db); err = dmu_write_uio_dnode(dn, uio, size, tx); DB_DNODE_EXIT(db); return (err); } /* * Write 'size' bytes from the uio buffer. * To the specified object. * Starting at offset zfs_uio_offset(uio). */ int dmu_write_uio(objset_t *os, uint64_t object, zfs_uio_t *uio, uint64_t size, dmu_tx_t *tx) { dnode_t *dn; int err; if (size == 0) return (0); err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); err = dmu_write_uio_dnode(dn, uio, size, tx); dnode_rele(dn, FTAG); return (err); } #endif /* _KERNEL */ /* * Allocate a loaned anonymous arc buffer. */ arc_buf_t * dmu_request_arcbuf(dmu_buf_t *handle, int size) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)handle; return (arc_loan_buf(db->db_objset->os_spa, B_FALSE, size)); } /* * Free a loaned arc buffer. */ void dmu_return_arcbuf(arc_buf_t *buf) { arc_return_buf(buf, FTAG); arc_buf_destroy(buf, FTAG); } /* * A "lightweight" write is faster than a regular write (e.g. * dmu_write_by_dnode() or dmu_assign_arcbuf_by_dnode()), because it avoids the * CPU cost of creating a dmu_buf_impl_t and arc_buf_[hdr_]_t. However, the * data can not be read or overwritten until the transaction's txg has been * synced. This makes it appropriate for workloads that are known to be * (temporarily) write-only, like "zfs receive". * * A single block is written, starting at the specified offset in bytes. If * the call is successful, it returns 0 and the provided abd has been * consumed (the caller should not free it). */ int dmu_lightweight_write_by_dnode(dnode_t *dn, uint64_t offset, abd_t *abd, const zio_prop_t *zp, enum zio_flag flags, dmu_tx_t *tx) { dbuf_dirty_record_t *dr = dbuf_dirty_lightweight(dn, dbuf_whichblock(dn, 0, offset), tx); if (dr == NULL) return (SET_ERROR(EIO)); dr->dt.dll.dr_abd = abd; dr->dt.dll.dr_props = *zp; dr->dt.dll.dr_flags = flags; return (0); } /* * When possible directly assign passed loaned arc buffer to a dbuf. * If this is not possible copy the contents of passed arc buf via * dmu_write(). */ int dmu_assign_arcbuf_by_dnode(dnode_t *dn, uint64_t offset, arc_buf_t *buf, dmu_tx_t *tx) { dmu_buf_impl_t *db; objset_t *os = dn->dn_objset; uint64_t object = dn->dn_object; uint32_t blksz = (uint32_t)arc_buf_lsize(buf); uint64_t blkid; rw_enter(&dn->dn_struct_rwlock, RW_READER); blkid = dbuf_whichblock(dn, 0, offset); db = dbuf_hold(dn, blkid, FTAG); if (db == NULL) return (SET_ERROR(EIO)); rw_exit(&dn->dn_struct_rwlock); /* * We can only assign if the offset is aligned and the arc buf is the * same size as the dbuf. */ if (offset == db->db.db_offset && blksz == db->db.db_size) { zfs_racct_write(blksz, 1); dbuf_assign_arcbuf(db, buf, tx); dbuf_rele(db, FTAG); } else { /* compressed bufs must always be assignable to their dbuf */ ASSERT3U(arc_get_compression(buf), ==, ZIO_COMPRESS_OFF); ASSERT(!(buf->b_flags & ARC_BUF_FLAG_COMPRESSED)); dbuf_rele(db, FTAG); dmu_write(os, object, offset, blksz, buf->b_data, tx); dmu_return_arcbuf(buf); } return (0); } int dmu_assign_arcbuf_by_dbuf(dmu_buf_t *handle, uint64_t offset, arc_buf_t *buf, dmu_tx_t *tx) { int err; dmu_buf_impl_t *dbuf = (dmu_buf_impl_t *)handle; DB_DNODE_ENTER(dbuf); err = dmu_assign_arcbuf_by_dnode(DB_DNODE(dbuf), offset, buf, tx); DB_DNODE_EXIT(dbuf); return (err); } typedef struct { dbuf_dirty_record_t *dsa_dr; dmu_sync_cb_t *dsa_done; zgd_t *dsa_zgd; dmu_tx_t *dsa_tx; } dmu_sync_arg_t; /* ARGSUSED */ static void dmu_sync_ready(zio_t *zio, arc_buf_t *buf, void *varg) { dmu_sync_arg_t *dsa = varg; dmu_buf_t *db = dsa->dsa_zgd->zgd_db; blkptr_t *bp = zio->io_bp; if (zio->io_error == 0) { if (BP_IS_HOLE(bp)) { /* * A block of zeros may compress to a hole, but the * block size still needs to be known for replay. */ BP_SET_LSIZE(bp, db->db_size); } else if (!BP_IS_EMBEDDED(bp)) { ASSERT(BP_GET_LEVEL(bp) == 0); BP_SET_FILL(bp, 1); } } } static void dmu_sync_late_arrival_ready(zio_t *zio) { dmu_sync_ready(zio, NULL, zio->io_private); } /* ARGSUSED */ static void dmu_sync_done(zio_t *zio, arc_buf_t *buf, void *varg) { dmu_sync_arg_t *dsa = varg; dbuf_dirty_record_t *dr = dsa->dsa_dr; dmu_buf_impl_t *db = dr->dr_dbuf; zgd_t *zgd = dsa->dsa_zgd; /* * Record the vdev(s) backing this blkptr so they can be flushed after * the writes for the lwb have completed. */ if (zio->io_error == 0) { zil_lwb_add_block(zgd->zgd_lwb, zgd->zgd_bp); } mutex_enter(&db->db_mtx); ASSERT(dr->dt.dl.dr_override_state == DR_IN_DMU_SYNC); if (zio->io_error == 0) { dr->dt.dl.dr_nopwrite = !!(zio->io_flags & ZIO_FLAG_NOPWRITE); if (dr->dt.dl.dr_nopwrite) { blkptr_t *bp = zio->io_bp; blkptr_t *bp_orig = &zio->io_bp_orig; uint8_t chksum = BP_GET_CHECKSUM(bp_orig); ASSERT(BP_EQUAL(bp, bp_orig)); VERIFY(BP_EQUAL(bp, db->db_blkptr)); ASSERT(zio->io_prop.zp_compress != ZIO_COMPRESS_OFF); VERIFY(zio_checksum_table[chksum].ci_flags & ZCHECKSUM_FLAG_NOPWRITE); } dr->dt.dl.dr_overridden_by = *zio->io_bp; dr->dt.dl.dr_override_state = DR_OVERRIDDEN; dr->dt.dl.dr_copies = zio->io_prop.zp_copies; /* * Old style holes are filled with all zeros, whereas * new-style holes maintain their lsize, type, level, * and birth time (see zio_write_compress). While we * need to reset the BP_SET_LSIZE() call that happened * in dmu_sync_ready for old style holes, we do *not* * want to wipe out the information contained in new * style holes. Thus, only zero out the block pointer if * it's an old style hole. */ if (BP_IS_HOLE(&dr->dt.dl.dr_overridden_by) && dr->dt.dl.dr_overridden_by.blk_birth == 0) BP_ZERO(&dr->dt.dl.dr_overridden_by); } else { dr->dt.dl.dr_override_state = DR_NOT_OVERRIDDEN; } cv_broadcast(&db->db_changed); mutex_exit(&db->db_mtx); dsa->dsa_done(dsa->dsa_zgd, zio->io_error); kmem_free(dsa, sizeof (*dsa)); } static void dmu_sync_late_arrival_done(zio_t *zio) { blkptr_t *bp = zio->io_bp; dmu_sync_arg_t *dsa = zio->io_private; zgd_t *zgd = dsa->dsa_zgd; if (zio->io_error == 0) { /* * Record the vdev(s) backing this blkptr so they can be * flushed after the writes for the lwb have completed. */ zil_lwb_add_block(zgd->zgd_lwb, zgd->zgd_bp); if (!BP_IS_HOLE(bp)) { blkptr_t *bp_orig __maybe_unused = &zio->io_bp_orig; ASSERT(!(zio->io_flags & ZIO_FLAG_NOPWRITE)); ASSERT(BP_IS_HOLE(bp_orig) || !BP_EQUAL(bp, bp_orig)); ASSERT(zio->io_bp->blk_birth == zio->io_txg); ASSERT(zio->io_txg > spa_syncing_txg(zio->io_spa)); zio_free(zio->io_spa, zio->io_txg, zio->io_bp); } } dmu_tx_commit(dsa->dsa_tx); dsa->dsa_done(dsa->dsa_zgd, zio->io_error); abd_free(zio->io_abd); kmem_free(dsa, sizeof (*dsa)); } static int dmu_sync_late_arrival(zio_t *pio, objset_t *os, dmu_sync_cb_t *done, zgd_t *zgd, zio_prop_t *zp, zbookmark_phys_t *zb) { dmu_sync_arg_t *dsa; dmu_tx_t *tx; tx = dmu_tx_create(os); dmu_tx_hold_space(tx, zgd->zgd_db->db_size); if (dmu_tx_assign(tx, TXG_WAIT) != 0) { dmu_tx_abort(tx); /* Make zl_get_data do txg_waited_synced() */ return (SET_ERROR(EIO)); } /* * In order to prevent the zgd's lwb from being free'd prior to * dmu_sync_late_arrival_done() being called, we have to ensure * the lwb's "max txg" takes this tx's txg into account. */ zil_lwb_add_txg(zgd->zgd_lwb, dmu_tx_get_txg(tx)); dsa = kmem_alloc(sizeof (dmu_sync_arg_t), KM_SLEEP); dsa->dsa_dr = NULL; dsa->dsa_done = done; dsa->dsa_zgd = zgd; dsa->dsa_tx = tx; /* * Since we are currently syncing this txg, it's nontrivial to * determine what BP to nopwrite against, so we disable nopwrite. * * When syncing, the db_blkptr is initially the BP of the previous * txg. We can not nopwrite against it because it will be changed * (this is similar to the non-late-arrival case where the dbuf is * dirty in a future txg). * * Then dbuf_write_ready() sets bp_blkptr to the location we will write. * We can not nopwrite against it because although the BP will not * (typically) be changed, the data has not yet been persisted to this * location. * * Finally, when dbuf_write_done() is called, it is theoretically * possible to always nopwrite, because the data that was written in * this txg is the same data that we are trying to write. However we * would need to check that this dbuf is not dirty in any future * txg's (as we do in the normal dmu_sync() path). For simplicity, we * don't nopwrite in this case. */ zp->zp_nopwrite = B_FALSE; zio_nowait(zio_write(pio, os->os_spa, dmu_tx_get_txg(tx), zgd->zgd_bp, abd_get_from_buf(zgd->zgd_db->db_data, zgd->zgd_db->db_size), zgd->zgd_db->db_size, zgd->zgd_db->db_size, zp, dmu_sync_late_arrival_ready, NULL, NULL, dmu_sync_late_arrival_done, dsa, ZIO_PRIORITY_SYNC_WRITE, ZIO_FLAG_CANFAIL, zb)); return (0); } /* * Intent log support: sync the block associated with db to disk. * N.B. and XXX: the caller is responsible for making sure that the * data isn't changing while dmu_sync() is writing it. * * Return values: * * EEXIST: this txg has already been synced, so there's nothing to do. * The caller should not log the write. * * ENOENT: the block was dbuf_free_range()'d, so there's nothing to do. * The caller should not log the write. * * EALREADY: this block is already in the process of being synced. * The caller should track its progress (somehow). * * EIO: could not do the I/O. * The caller should do a txg_wait_synced(). * * 0: the I/O has been initiated. * The caller should log this blkptr in the done callback. * It is possible that the I/O will fail, in which case * the error will be reported to the done callback and * propagated to pio from zio_done(). */ int dmu_sync(zio_t *pio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)zgd->zgd_db; objset_t *os = db->db_objset; dsl_dataset_t *ds = os->os_dsl_dataset; dbuf_dirty_record_t *dr, *dr_next; dmu_sync_arg_t *dsa; zbookmark_phys_t zb; zio_prop_t zp; dnode_t *dn; ASSERT(pio != NULL); ASSERT(txg != 0); SET_BOOKMARK(&zb, ds->ds_object, db->db.db_object, db->db_level, db->db_blkid); DB_DNODE_ENTER(db); dn = DB_DNODE(db); dmu_write_policy(os, dn, db->db_level, WP_DMU_SYNC, &zp); DB_DNODE_EXIT(db); /* * If we're frozen (running ziltest), we always need to generate a bp. */ if (txg > spa_freeze_txg(os->os_spa)) return (dmu_sync_late_arrival(pio, os, done, zgd, &zp, &zb)); /* * Grabbing db_mtx now provides a barrier between dbuf_sync_leaf() * and us. If we determine that this txg is not yet syncing, * but it begins to sync a moment later, that's OK because the * sync thread will block in dbuf_sync_leaf() until we drop db_mtx. */ mutex_enter(&db->db_mtx); if (txg <= spa_last_synced_txg(os->os_spa)) { /* * This txg has already synced. There's nothing to do. */ mutex_exit(&db->db_mtx); return (SET_ERROR(EEXIST)); } if (txg <= spa_syncing_txg(os->os_spa)) { /* * This txg is currently syncing, so we can't mess with * the dirty record anymore; just write a new log block. */ mutex_exit(&db->db_mtx); return (dmu_sync_late_arrival(pio, os, done, zgd, &zp, &zb)); } dr = dbuf_find_dirty_eq(db, txg); if (dr == NULL) { /* * There's no dr for this dbuf, so it must have been freed. * There's no need to log writes to freed blocks, so we're done. */ mutex_exit(&db->db_mtx); return (SET_ERROR(ENOENT)); } dr_next = list_next(&db->db_dirty_records, dr); ASSERT(dr_next == NULL || dr_next->dr_txg < txg); if (db->db_blkptr != NULL) { /* * We need to fill in zgd_bp with the current blkptr so that * the nopwrite code can check if we're writing the same * data that's already on disk. We can only nopwrite if we * are sure that after making the copy, db_blkptr will not * change until our i/o completes. We ensure this by * holding the db_mtx, and only allowing nopwrite if the * block is not already dirty (see below). This is verified * by dmu_sync_done(), which VERIFYs that the db_blkptr has * not changed. */ *zgd->zgd_bp = *db->db_blkptr; } /* * Assume the on-disk data is X, the current syncing data (in * txg - 1) is Y, and the current in-memory data is Z (currently * in dmu_sync). * * We usually want to perform a nopwrite if X and Z are the * same. However, if Y is different (i.e. the BP is going to * change before this write takes effect), then a nopwrite will * be incorrect - we would override with X, which could have * been freed when Y was written. * * (Note that this is not a concern when we are nop-writing from * syncing context, because X and Y must be identical, because * all previous txgs have been synced.) * * Therefore, we disable nopwrite if the current BP could change * before this TXG. There are two ways it could change: by * being dirty (dr_next is non-NULL), or by being freed * (dnode_block_freed()). This behavior is verified by * zio_done(), which VERIFYs that the override BP is identical * to the on-disk BP. */ DB_DNODE_ENTER(db); dn = DB_DNODE(db); if (dr_next != NULL || dnode_block_freed(dn, db->db_blkid)) zp.zp_nopwrite = B_FALSE; DB_DNODE_EXIT(db); ASSERT(dr->dr_txg == txg); if (dr->dt.dl.dr_override_state == DR_IN_DMU_SYNC || dr->dt.dl.dr_override_state == DR_OVERRIDDEN) { /* * We have already issued a sync write for this buffer, * or this buffer has already been synced. It could not * have been dirtied since, or we would have cleared the state. */ mutex_exit(&db->db_mtx); return (SET_ERROR(EALREADY)); } ASSERT(dr->dt.dl.dr_override_state == DR_NOT_OVERRIDDEN); dr->dt.dl.dr_override_state = DR_IN_DMU_SYNC; mutex_exit(&db->db_mtx); dsa = kmem_alloc(sizeof (dmu_sync_arg_t), KM_SLEEP); dsa->dsa_dr = dr; dsa->dsa_done = done; dsa->dsa_zgd = zgd; dsa->dsa_tx = NULL; zio_nowait(arc_write(pio, os->os_spa, txg, zgd->zgd_bp, dr->dt.dl.dr_data, DBUF_IS_L2CACHEABLE(db), &zp, dmu_sync_ready, NULL, NULL, dmu_sync_done, dsa, ZIO_PRIORITY_SYNC_WRITE, ZIO_FLAG_CANFAIL, &zb)); return (0); } int dmu_object_set_nlevels(objset_t *os, uint64_t object, int nlevels, dmu_tx_t *tx) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); err = dnode_set_nlevels(dn, nlevels, tx); dnode_rele(dn, FTAG); return (err); } int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, int ibs, dmu_tx_t *tx) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); err = dnode_set_blksz(dn, size, ibs, tx); dnode_rele(dn, FTAG); return (err); } int dmu_object_set_maxblkid(objset_t *os, uint64_t object, uint64_t maxblkid, dmu_tx_t *tx) { dnode_t *dn; int err; err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); dnode_new_blkid(dn, maxblkid, tx, B_FALSE, B_TRUE); rw_exit(&dn->dn_struct_rwlock); dnode_rele(dn, FTAG); return (0); } void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, dmu_tx_t *tx) { dnode_t *dn; /* * Send streams include each object's checksum function. This * check ensures that the receiving system can understand the * checksum function transmitted. */ ASSERT3U(checksum, <, ZIO_CHECKSUM_LEGACY_FUNCTIONS); VERIFY0(dnode_hold(os, object, FTAG, &dn)); ASSERT3U(checksum, <, ZIO_CHECKSUM_FUNCTIONS); dn->dn_checksum = checksum; dnode_setdirty(dn, tx); dnode_rele(dn, FTAG); } void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, dmu_tx_t *tx) { dnode_t *dn; /* * Send streams include each object's compression function. This * check ensures that the receiving system can understand the * compression function transmitted. */ ASSERT3U(compress, <, ZIO_COMPRESS_LEGACY_FUNCTIONS); VERIFY0(dnode_hold(os, object, FTAG, &dn)); dn->dn_compress = compress; dnode_setdirty(dn, tx); dnode_rele(dn, FTAG); } /* * When the "redundant_metadata" property is set to "most", only indirect * blocks of this level and higher will have an additional ditto block. */ int zfs_redundant_metadata_most_ditto_level = 2; void dmu_write_policy(objset_t *os, dnode_t *dn, int level, int wp, zio_prop_t *zp) { dmu_object_type_t type = dn ? dn->dn_type : DMU_OT_OBJSET; boolean_t ismd = (level > 0 || DMU_OT_IS_METADATA(type) || (wp & WP_SPILL)); enum zio_checksum checksum = os->os_checksum; enum zio_compress compress = os->os_compress; uint8_t complevel = os->os_complevel; enum zio_checksum dedup_checksum = os->os_dedup_checksum; boolean_t dedup = B_FALSE; boolean_t nopwrite = B_FALSE; boolean_t dedup_verify = os->os_dedup_verify; boolean_t encrypt = B_FALSE; int copies = os->os_copies; /* * We maintain different write policies for each of the following * types of data: * 1. metadata * 2. preallocated blocks (i.e. level-0 blocks of a dump device) * 3. all other level 0 blocks */ if (ismd) { /* * XXX -- we should design a compression algorithm * that specializes in arrays of bps. */ compress = zio_compress_select(os->os_spa, ZIO_COMPRESS_ON, ZIO_COMPRESS_ON); /* * Metadata always gets checksummed. If the data * checksum is multi-bit correctable, and it's not a * ZBT-style checksum, then it's suitable for metadata * as well. Otherwise, the metadata checksum defaults * to fletcher4. */ if (!(zio_checksum_table[checksum].ci_flags & ZCHECKSUM_FLAG_METADATA) || (zio_checksum_table[checksum].ci_flags & ZCHECKSUM_FLAG_EMBEDDED)) checksum = ZIO_CHECKSUM_FLETCHER_4; if (os->os_redundant_metadata == ZFS_REDUNDANT_METADATA_ALL || (os->os_redundant_metadata == ZFS_REDUNDANT_METADATA_MOST && (level >= zfs_redundant_metadata_most_ditto_level || DMU_OT_IS_METADATA(type) || (wp & WP_SPILL)))) copies++; } else if (wp & WP_NOFILL) { ASSERT(level == 0); /* * If we're writing preallocated blocks, we aren't actually * writing them so don't set any policy properties. These * blocks are currently only used by an external subsystem * outside of zfs (i.e. dump) and not written by the zio * pipeline. */ compress = ZIO_COMPRESS_OFF; checksum = ZIO_CHECKSUM_OFF; } else { compress = zio_compress_select(os->os_spa, dn->dn_compress, compress); complevel = zio_complevel_select(os->os_spa, compress, complevel, complevel); checksum = (dedup_checksum == ZIO_CHECKSUM_OFF) ? zio_checksum_select(dn->dn_checksum, checksum) : dedup_checksum; /* * Determine dedup setting. If we are in dmu_sync(), * we won't actually dedup now because that's all * done in syncing context; but we do want to use the * dedup checksum. If the checksum is not strong * enough to ensure unique signatures, force * dedup_verify. */ if (dedup_checksum != ZIO_CHECKSUM_OFF) { dedup = (wp & WP_DMU_SYNC) ? B_FALSE : B_TRUE; if (!(zio_checksum_table[checksum].ci_flags & ZCHECKSUM_FLAG_DEDUP)) dedup_verify = B_TRUE; } /* * Enable nopwrite if we have secure enough checksum * algorithm (see comment in zio_nop_write) and * compression is enabled. We don't enable nopwrite if * dedup is enabled as the two features are mutually * exclusive. */ nopwrite = (!dedup && (zio_checksum_table[checksum].ci_flags & ZCHECKSUM_FLAG_NOPWRITE) && compress != ZIO_COMPRESS_OFF && zfs_nopwrite_enabled); } /* * All objects in an encrypted objset are protected from modification * via a MAC. Encrypted objects store their IV and salt in the last DVA * in the bp, so we cannot use all copies. Encrypted objects are also * not subject to nopwrite since writing the same data will still * result in a new ciphertext. Only encrypted blocks can be dedup'd * to avoid ambiguity in the dedup code since the DDT does not store * object types. */ if (os->os_encrypted && (wp & WP_NOFILL) == 0) { encrypt = B_TRUE; if (DMU_OT_IS_ENCRYPTED(type)) { copies = MIN(copies, SPA_DVAS_PER_BP - 1); nopwrite = B_FALSE; } else { dedup = B_FALSE; } if (level <= 0 && (type == DMU_OT_DNODE || type == DMU_OT_OBJSET)) { compress = ZIO_COMPRESS_EMPTY; } } zp->zp_compress = compress; zp->zp_complevel = complevel; zp->zp_checksum = checksum; zp->zp_type = (wp & WP_SPILL) ? dn->dn_bonustype : type; zp->zp_level = level; zp->zp_copies = MIN(copies, spa_max_replication(os->os_spa)); zp->zp_dedup = dedup; zp->zp_dedup_verify = dedup && dedup_verify; zp->zp_nopwrite = nopwrite; zp->zp_encrypt = encrypt; zp->zp_byteorder = ZFS_HOST_BYTEORDER; bzero(zp->zp_salt, ZIO_DATA_SALT_LEN); bzero(zp->zp_iv, ZIO_DATA_IV_LEN); bzero(zp->zp_mac, ZIO_DATA_MAC_LEN); zp->zp_zpl_smallblk = DMU_OT_IS_FILE(zp->zp_type) ? os->os_zpl_special_smallblock : 0; ASSERT3U(zp->zp_compress, !=, ZIO_COMPRESS_INHERIT); } /* * This function is only called from zfs_holey_common() for zpl_llseek() * in order to determine the location of holes. In order to accurately * report holes all dirty data must be synced to disk. This causes extremely * poor performance when seeking for holes in a dirty file. As a compromise, * only provide hole data when the dnode is clean. When a dnode is dirty * report the dnode as having no holes which is always a safe thing to do. */ int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, uint64_t *off) { dnode_t *dn; - int i, err; - boolean_t clean = B_TRUE; + int err; +restart: err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); - /* - * Check if dnode is dirty - */ - for (i = 0; i < TXG_SIZE; i++) { - if (multilist_link_active(&dn->dn_dirty_link[i])) { - clean = B_FALSE; - break; - } - } + rw_enter(&dn->dn_struct_rwlock, RW_READER); - /* - * If compatibility option is on, sync any current changes before - * we go trundling through the block pointers. - */ - if (!clean && zfs_dmu_offset_next_sync) { - clean = B_TRUE; - dnode_rele(dn, FTAG); - txg_wait_synced(dmu_objset_pool(os), 0); - err = dnode_hold(os, object, FTAG, &dn); - if (err) - return (err); - } + if (dnode_is_dirty(dn)) { + /* + * If the zfs_dmu_offset_next_sync module option is enabled + * then strict hole reporting has been requested. Dirty + * dnodes must be synced to disk to accurately report all + * holes. When disabled (the default) dirty dnodes are + * reported to not have any holes which is always safe. + * + * When called by zfs_holey_common() the zp->z_rangelock + * is held to prevent zfs_write() and mmap writeback from + * re-dirtying the dnode after txg_wait_synced(). + */ + if (zfs_dmu_offset_next_sync) { + rw_exit(&dn->dn_struct_rwlock); + dnode_rele(dn, FTAG); + txg_wait_synced(dmu_objset_pool(os), 0); + goto restart; + } - if (clean) - err = dnode_next_offset(dn, - (hole ? DNODE_FIND_HOLE : 0), off, 1, 1, 0); - else err = SET_ERROR(EBUSY); + } else { + err = dnode_next_offset(dn, DNODE_FIND_HAVELOCK | + (hole ? DNODE_FIND_HOLE : 0), off, 1, 1, 0); + } + rw_exit(&dn->dn_struct_rwlock); dnode_rele(dn, FTAG); return (err); } void __dmu_object_info_from_dnode(dnode_t *dn, dmu_object_info_t *doi) { dnode_phys_t *dnp = dn->dn_phys; doi->doi_data_block_size = dn->dn_datablksz; doi->doi_metadata_block_size = dn->dn_indblkshift ? 1ULL << dn->dn_indblkshift : 0; doi->doi_type = dn->dn_type; doi->doi_bonus_type = dn->dn_bonustype; doi->doi_bonus_size = dn->dn_bonuslen; doi->doi_dnodesize = dn->dn_num_slots << DNODE_SHIFT; doi->doi_indirection = dn->dn_nlevels; doi->doi_checksum = dn->dn_checksum; doi->doi_compress = dn->dn_compress; doi->doi_nblkptr = dn->dn_nblkptr; doi->doi_physical_blocks_512 = (DN_USED_BYTES(dnp) + 256) >> 9; doi->doi_max_offset = (dn->dn_maxblkid + 1) * dn->dn_datablksz; doi->doi_fill_count = 0; for (int i = 0; i < dnp->dn_nblkptr; i++) doi->doi_fill_count += BP_GET_FILL(&dnp->dn_blkptr[i]); } void dmu_object_info_from_dnode(dnode_t *dn, dmu_object_info_t *doi) { rw_enter(&dn->dn_struct_rwlock, RW_READER); mutex_enter(&dn->dn_mtx); __dmu_object_info_from_dnode(dn, doi); mutex_exit(&dn->dn_mtx); rw_exit(&dn->dn_struct_rwlock); } /* * Get information on a DMU object. * If doi is NULL, just indicates whether the object exists. */ int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi) { dnode_t *dn; int err = dnode_hold(os, object, FTAG, &dn); if (err) return (err); if (doi != NULL) dmu_object_info_from_dnode(dn, doi); dnode_rele(dn, FTAG); return (0); } /* * As above, but faster; can be used when you have a held dbuf in hand. */ void dmu_object_info_from_db(dmu_buf_t *db_fake, dmu_object_info_t *doi) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; DB_DNODE_ENTER(db); dmu_object_info_from_dnode(DB_DNODE(db), doi); DB_DNODE_EXIT(db); } /* * Faster still when you only care about the size. */ void dmu_object_size_from_db(dmu_buf_t *db_fake, uint32_t *blksize, u_longlong_t *nblk512) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; DB_DNODE_ENTER(db); dn = DB_DNODE(db); *blksize = dn->dn_datablksz; /* add in number of slots used for the dnode itself */ *nblk512 = ((DN_USED_BYTES(dn->dn_phys) + SPA_MINBLOCKSIZE/2) >> SPA_MINBLOCKSHIFT) + dn->dn_num_slots; DB_DNODE_EXIT(db); } void dmu_object_dnsize_from_db(dmu_buf_t *db_fake, int *dnsize) { dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake; dnode_t *dn; DB_DNODE_ENTER(db); dn = DB_DNODE(db); *dnsize = dn->dn_num_slots << DNODE_SHIFT; DB_DNODE_EXIT(db); } void byteswap_uint64_array(void *vbuf, size_t size) { uint64_t *buf = vbuf; size_t count = size >> 3; int i; ASSERT((size & 7) == 0); for (i = 0; i < count; i++) buf[i] = BSWAP_64(buf[i]); } void byteswap_uint32_array(void *vbuf, size_t size) { uint32_t *buf = vbuf; size_t count = size >> 2; int i; ASSERT((size & 3) == 0); for (i = 0; i < count; i++) buf[i] = BSWAP_32(buf[i]); } void byteswap_uint16_array(void *vbuf, size_t size) { uint16_t *buf = vbuf; size_t count = size >> 1; int i; ASSERT((size & 1) == 0); for (i = 0; i < count; i++) buf[i] = BSWAP_16(buf[i]); } /* ARGSUSED */ void byteswap_uint8_array(void *vbuf, size_t size) { } void dmu_init(void) { abd_init(); zfs_dbgmsg_init(); sa_cache_init(); dmu_objset_init(); dnode_init(); zfetch_init(); dmu_tx_init(); l2arc_init(); arc_init(); dbuf_init(); } void dmu_fini(void) { arc_fini(); /* arc depends on l2arc, so arc must go first */ l2arc_fini(); dmu_tx_fini(); zfetch_fini(); dbuf_fini(); dnode_fini(); dmu_objset_fini(); sa_cache_fini(); zfs_dbgmsg_fini(); abd_fini(); } EXPORT_SYMBOL(dmu_bonus_hold); EXPORT_SYMBOL(dmu_bonus_hold_by_dnode); EXPORT_SYMBOL(dmu_buf_hold_array_by_bonus); EXPORT_SYMBOL(dmu_buf_rele_array); EXPORT_SYMBOL(dmu_prefetch); EXPORT_SYMBOL(dmu_free_range); EXPORT_SYMBOL(dmu_free_long_range); EXPORT_SYMBOL(dmu_free_long_object); EXPORT_SYMBOL(dmu_read); EXPORT_SYMBOL(dmu_read_by_dnode); EXPORT_SYMBOL(dmu_write); EXPORT_SYMBOL(dmu_write_by_dnode); EXPORT_SYMBOL(dmu_prealloc); EXPORT_SYMBOL(dmu_object_info); EXPORT_SYMBOL(dmu_object_info_from_dnode); EXPORT_SYMBOL(dmu_object_info_from_db); EXPORT_SYMBOL(dmu_object_size_from_db); EXPORT_SYMBOL(dmu_object_dnsize_from_db); EXPORT_SYMBOL(dmu_object_set_nlevels); EXPORT_SYMBOL(dmu_object_set_blocksize); EXPORT_SYMBOL(dmu_object_set_maxblkid); EXPORT_SYMBOL(dmu_object_set_checksum); EXPORT_SYMBOL(dmu_object_set_compress); EXPORT_SYMBOL(dmu_offset_next); EXPORT_SYMBOL(dmu_write_policy); EXPORT_SYMBOL(dmu_sync); EXPORT_SYMBOL(dmu_request_arcbuf); EXPORT_SYMBOL(dmu_return_arcbuf); EXPORT_SYMBOL(dmu_assign_arcbuf_by_dnode); EXPORT_SYMBOL(dmu_assign_arcbuf_by_dbuf); EXPORT_SYMBOL(dmu_buf_hold); EXPORT_SYMBOL(dmu_ot); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs, zfs_, nopwrite_enabled, INT, ZMOD_RW, "Enable NOP writes"); ZFS_MODULE_PARAM(zfs, zfs_, per_txg_dirty_frees_percent, ULONG, ZMOD_RW, "Percentage of dirtied blocks from frees in one TXG"); ZFS_MODULE_PARAM(zfs, zfs_, dmu_offset_next_sync, INT, ZMOD_RW, "Enable forcing txg sync to find holes"); ZFS_MODULE_PARAM(zfs, , dmu_prefetch_max, INT, ZMOD_RW, "Limit one prefetch call to this size"); /* END CSTYLED */ diff --git a/module/zfs/dnode.c b/module/zfs/dnode.c index 7f741542ce02..572d88ec2bf9 100644 --- a/module/zfs/dnode.c +++ b/module/zfs/dnode.c @@ -1,2580 +1,2600 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2020 by Delphix. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include dnode_stats_t dnode_stats = { { "dnode_hold_dbuf_hold", KSTAT_DATA_UINT64 }, { "dnode_hold_dbuf_read", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_hits", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_misses", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_interior", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_lock_retry", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_lock_misses", KSTAT_DATA_UINT64 }, { "dnode_hold_alloc_type_none", KSTAT_DATA_UINT64 }, { "dnode_hold_free_hits", KSTAT_DATA_UINT64 }, { "dnode_hold_free_misses", KSTAT_DATA_UINT64 }, { "dnode_hold_free_lock_misses", KSTAT_DATA_UINT64 }, { "dnode_hold_free_lock_retry", KSTAT_DATA_UINT64 }, { "dnode_hold_free_overflow", KSTAT_DATA_UINT64 }, { "dnode_hold_free_refcount", KSTAT_DATA_UINT64 }, { "dnode_free_interior_lock_retry", KSTAT_DATA_UINT64 }, { "dnode_allocate", KSTAT_DATA_UINT64 }, { "dnode_reallocate", KSTAT_DATA_UINT64 }, { "dnode_buf_evict", KSTAT_DATA_UINT64 }, { "dnode_alloc_next_chunk", KSTAT_DATA_UINT64 }, { "dnode_alloc_race", KSTAT_DATA_UINT64 }, { "dnode_alloc_next_block", KSTAT_DATA_UINT64 }, { "dnode_move_invalid", KSTAT_DATA_UINT64 }, { "dnode_move_recheck1", KSTAT_DATA_UINT64 }, { "dnode_move_recheck2", KSTAT_DATA_UINT64 }, { "dnode_move_special", KSTAT_DATA_UINT64 }, { "dnode_move_handle", KSTAT_DATA_UINT64 }, { "dnode_move_rwlock", KSTAT_DATA_UINT64 }, { "dnode_move_active", KSTAT_DATA_UINT64 }, }; static kstat_t *dnode_ksp; static kmem_cache_t *dnode_cache; static dnode_phys_t dnode_phys_zero __maybe_unused; int zfs_default_bs = SPA_MINBLOCKSHIFT; int zfs_default_ibs = DN_MAX_INDBLKSHIFT; #ifdef _KERNEL static kmem_cbrc_t dnode_move(void *, void *, size_t, void *); #endif /* _KERNEL */ static int dbuf_compare(const void *x1, const void *x2) { const dmu_buf_impl_t *d1 = x1; const dmu_buf_impl_t *d2 = x2; int cmp = TREE_CMP(d1->db_level, d2->db_level); if (likely(cmp)) return (cmp); cmp = TREE_CMP(d1->db_blkid, d2->db_blkid); if (likely(cmp)) return (cmp); if (d1->db_state == DB_SEARCH) { ASSERT3S(d2->db_state, !=, DB_SEARCH); return (-1); } else if (d2->db_state == DB_SEARCH) { ASSERT3S(d1->db_state, !=, DB_SEARCH); return (1); } return (TREE_PCMP(d1, d2)); } /* ARGSUSED */ static int dnode_cons(void *arg, void *unused, int kmflag) { dnode_t *dn = arg; int i; rw_init(&dn->dn_struct_rwlock, NULL, RW_NOLOCKDEP, NULL); mutex_init(&dn->dn_mtx, NULL, MUTEX_DEFAULT, NULL); mutex_init(&dn->dn_dbufs_mtx, NULL, MUTEX_DEFAULT, NULL); cv_init(&dn->dn_notxholds, NULL, CV_DEFAULT, NULL); cv_init(&dn->dn_nodnholds, NULL, CV_DEFAULT, NULL); /* * Every dbuf has a reference, and dropping a tracked reference is * O(number of references), so don't track dn_holds. */ zfs_refcount_create_untracked(&dn->dn_holds); zfs_refcount_create(&dn->dn_tx_holds); list_link_init(&dn->dn_link); bzero(&dn->dn_next_type[0], sizeof (dn->dn_next_type)); bzero(&dn->dn_next_nblkptr[0], sizeof (dn->dn_next_nblkptr)); bzero(&dn->dn_next_nlevels[0], sizeof (dn->dn_next_nlevels)); bzero(&dn->dn_next_indblkshift[0], sizeof (dn->dn_next_indblkshift)); bzero(&dn->dn_next_bonustype[0], sizeof (dn->dn_next_bonustype)); bzero(&dn->dn_rm_spillblk[0], sizeof (dn->dn_rm_spillblk)); bzero(&dn->dn_next_bonuslen[0], sizeof (dn->dn_next_bonuslen)); bzero(&dn->dn_next_blksz[0], sizeof (dn->dn_next_blksz)); bzero(&dn->dn_next_maxblkid[0], sizeof (dn->dn_next_maxblkid)); for (i = 0; i < TXG_SIZE; i++) { multilist_link_init(&dn->dn_dirty_link[i]); dn->dn_free_ranges[i] = NULL; list_create(&dn->dn_dirty_records[i], sizeof (dbuf_dirty_record_t), offsetof(dbuf_dirty_record_t, dr_dirty_node)); } dn->dn_allocated_txg = 0; dn->dn_free_txg = 0; dn->dn_assigned_txg = 0; dn->dn_dirty_txg = 0; dn->dn_dirtyctx = 0; dn->dn_dirtyctx_firstset = NULL; dn->dn_bonus = NULL; dn->dn_have_spill = B_FALSE; dn->dn_zio = NULL; dn->dn_oldused = 0; dn->dn_oldflags = 0; dn->dn_olduid = 0; dn->dn_oldgid = 0; dn->dn_oldprojid = ZFS_DEFAULT_PROJID; dn->dn_newuid = 0; dn->dn_newgid = 0; dn->dn_newprojid = ZFS_DEFAULT_PROJID; dn->dn_id_flags = 0; dn->dn_dbufs_count = 0; avl_create(&dn->dn_dbufs, dbuf_compare, sizeof (dmu_buf_impl_t), offsetof(dmu_buf_impl_t, db_link)); dn->dn_moved = 0; return (0); } /* ARGSUSED */ static void dnode_dest(void *arg, void *unused) { int i; dnode_t *dn = arg; rw_destroy(&dn->dn_struct_rwlock); mutex_destroy(&dn->dn_mtx); mutex_destroy(&dn->dn_dbufs_mtx); cv_destroy(&dn->dn_notxholds); cv_destroy(&dn->dn_nodnholds); zfs_refcount_destroy(&dn->dn_holds); zfs_refcount_destroy(&dn->dn_tx_holds); ASSERT(!list_link_active(&dn->dn_link)); for (i = 0; i < TXG_SIZE; i++) { ASSERT(!multilist_link_active(&dn->dn_dirty_link[i])); ASSERT3P(dn->dn_free_ranges[i], ==, NULL); list_destroy(&dn->dn_dirty_records[i]); ASSERT0(dn->dn_next_nblkptr[i]); ASSERT0(dn->dn_next_nlevels[i]); ASSERT0(dn->dn_next_indblkshift[i]); ASSERT0(dn->dn_next_bonustype[i]); ASSERT0(dn->dn_rm_spillblk[i]); ASSERT0(dn->dn_next_bonuslen[i]); ASSERT0(dn->dn_next_blksz[i]); ASSERT0(dn->dn_next_maxblkid[i]); } ASSERT0(dn->dn_allocated_txg); ASSERT0(dn->dn_free_txg); ASSERT0(dn->dn_assigned_txg); ASSERT0(dn->dn_dirty_txg); ASSERT0(dn->dn_dirtyctx); ASSERT3P(dn->dn_dirtyctx_firstset, ==, NULL); ASSERT3P(dn->dn_bonus, ==, NULL); ASSERT(!dn->dn_have_spill); ASSERT3P(dn->dn_zio, ==, NULL); ASSERT0(dn->dn_oldused); ASSERT0(dn->dn_oldflags); ASSERT0(dn->dn_olduid); ASSERT0(dn->dn_oldgid); ASSERT0(dn->dn_oldprojid); ASSERT0(dn->dn_newuid); ASSERT0(dn->dn_newgid); ASSERT0(dn->dn_newprojid); ASSERT0(dn->dn_id_flags); ASSERT0(dn->dn_dbufs_count); avl_destroy(&dn->dn_dbufs); } void dnode_init(void) { ASSERT(dnode_cache == NULL); dnode_cache = kmem_cache_create("dnode_t", sizeof (dnode_t), 0, dnode_cons, dnode_dest, NULL, NULL, NULL, 0); kmem_cache_set_move(dnode_cache, dnode_move); dnode_ksp = kstat_create("zfs", 0, "dnodestats", "misc", KSTAT_TYPE_NAMED, sizeof (dnode_stats) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL); if (dnode_ksp != NULL) { dnode_ksp->ks_data = &dnode_stats; kstat_install(dnode_ksp); } } void dnode_fini(void) { if (dnode_ksp != NULL) { kstat_delete(dnode_ksp); dnode_ksp = NULL; } kmem_cache_destroy(dnode_cache); dnode_cache = NULL; } #ifdef ZFS_DEBUG void dnode_verify(dnode_t *dn) { int drop_struct_lock = FALSE; ASSERT(dn->dn_phys); ASSERT(dn->dn_objset); ASSERT(dn->dn_handle->dnh_dnode == dn); ASSERT(DMU_OT_IS_VALID(dn->dn_phys->dn_type)); if (!(zfs_flags & ZFS_DEBUG_DNODE_VERIFY)) return; if (!RW_WRITE_HELD(&dn->dn_struct_rwlock)) { rw_enter(&dn->dn_struct_rwlock, RW_READER); drop_struct_lock = TRUE; } if (dn->dn_phys->dn_type != DMU_OT_NONE || dn->dn_allocated_txg != 0) { int i; int max_bonuslen = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots); ASSERT3U(dn->dn_indblkshift, <=, SPA_MAXBLOCKSHIFT); if (dn->dn_datablkshift) { ASSERT3U(dn->dn_datablkshift, >=, SPA_MINBLOCKSHIFT); ASSERT3U(dn->dn_datablkshift, <=, SPA_MAXBLOCKSHIFT); ASSERT3U(1<dn_datablkshift, ==, dn->dn_datablksz); } ASSERT3U(dn->dn_nlevels, <=, 30); ASSERT(DMU_OT_IS_VALID(dn->dn_type)); ASSERT3U(dn->dn_nblkptr, >=, 1); ASSERT3U(dn->dn_nblkptr, <=, DN_MAX_NBLKPTR); ASSERT3U(dn->dn_bonuslen, <=, max_bonuslen); ASSERT3U(dn->dn_datablksz, ==, dn->dn_datablkszsec << SPA_MINBLOCKSHIFT); ASSERT3U(ISP2(dn->dn_datablksz), ==, dn->dn_datablkshift != 0); ASSERT3U((dn->dn_nblkptr - 1) * sizeof (blkptr_t) + dn->dn_bonuslen, <=, max_bonuslen); for (i = 0; i < TXG_SIZE; i++) { ASSERT3U(dn->dn_next_nlevels[i], <=, dn->dn_nlevels); } } if (dn->dn_phys->dn_type != DMU_OT_NONE) ASSERT3U(dn->dn_phys->dn_nlevels, <=, dn->dn_nlevels); ASSERT(DMU_OBJECT_IS_SPECIAL(dn->dn_object) || dn->dn_dbuf != NULL); if (dn->dn_dbuf != NULL) { ASSERT3P(dn->dn_phys, ==, (dnode_phys_t *)dn->dn_dbuf->db.db_data + (dn->dn_object % (dn->dn_dbuf->db.db_size >> DNODE_SHIFT))); } if (drop_struct_lock) rw_exit(&dn->dn_struct_rwlock); } #endif void dnode_byteswap(dnode_phys_t *dnp) { uint64_t *buf64 = (void*)&dnp->dn_blkptr; int i; if (dnp->dn_type == DMU_OT_NONE) { bzero(dnp, sizeof (dnode_phys_t)); return; } dnp->dn_datablkszsec = BSWAP_16(dnp->dn_datablkszsec); dnp->dn_bonuslen = BSWAP_16(dnp->dn_bonuslen); dnp->dn_extra_slots = BSWAP_8(dnp->dn_extra_slots); dnp->dn_maxblkid = BSWAP_64(dnp->dn_maxblkid); dnp->dn_used = BSWAP_64(dnp->dn_used); /* * dn_nblkptr is only one byte, so it's OK to read it in either * byte order. We can't read dn_bouslen. */ ASSERT(dnp->dn_indblkshift <= SPA_MAXBLOCKSHIFT); ASSERT(dnp->dn_nblkptr <= DN_MAX_NBLKPTR); for (i = 0; i < dnp->dn_nblkptr * sizeof (blkptr_t)/8; i++) buf64[i] = BSWAP_64(buf64[i]); /* * OK to check dn_bonuslen for zero, because it won't matter if * we have the wrong byte order. This is necessary because the * dnode dnode is smaller than a regular dnode. */ if (dnp->dn_bonuslen != 0) { /* * Note that the bonus length calculated here may be * longer than the actual bonus buffer. This is because * we always put the bonus buffer after the last block * pointer (instead of packing it against the end of the * dnode buffer). */ int off = (dnp->dn_nblkptr-1) * sizeof (blkptr_t); int slots = dnp->dn_extra_slots + 1; size_t len = DN_SLOTS_TO_BONUSLEN(slots) - off; dmu_object_byteswap_t byteswap; ASSERT(DMU_OT_IS_VALID(dnp->dn_bonustype)); byteswap = DMU_OT_BYTESWAP(dnp->dn_bonustype); dmu_ot_byteswap[byteswap].ob_func(dnp->dn_bonus + off, len); } /* Swap SPILL block if we have one */ if (dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) byteswap_uint64_array(DN_SPILL_BLKPTR(dnp), sizeof (blkptr_t)); } void dnode_buf_byteswap(void *vbuf, size_t size) { int i = 0; ASSERT3U(sizeof (dnode_phys_t), ==, (1<dn_type != DMU_OT_NONE) i += dnp->dn_extra_slots * DNODE_MIN_SIZE; } } void dnode_setbonuslen(dnode_t *dn, int newsize, dmu_tx_t *tx) { ASSERT3U(zfs_refcount_count(&dn->dn_holds), >=, 1); dnode_setdirty(dn, tx); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); ASSERT3U(newsize, <=, DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots) - (dn->dn_nblkptr-1) * sizeof (blkptr_t)); if (newsize < dn->dn_bonuslen) { /* clear any data after the end of the new size */ size_t diff = dn->dn_bonuslen - newsize; char *data_end = ((char *)dn->dn_bonus->db.db_data) + newsize; bzero(data_end, diff); } dn->dn_bonuslen = newsize; if (newsize == 0) dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = DN_ZERO_BONUSLEN; else dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = dn->dn_bonuslen; rw_exit(&dn->dn_struct_rwlock); } void dnode_setbonus_type(dnode_t *dn, dmu_object_type_t newtype, dmu_tx_t *tx) { ASSERT3U(zfs_refcount_count(&dn->dn_holds), >=, 1); dnode_setdirty(dn, tx); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); dn->dn_bonustype = newtype; dn->dn_next_bonustype[tx->tx_txg & TXG_MASK] = dn->dn_bonustype; rw_exit(&dn->dn_struct_rwlock); } void dnode_rm_spill(dnode_t *dn, dmu_tx_t *tx) { ASSERT3U(zfs_refcount_count(&dn->dn_holds), >=, 1); ASSERT(RW_WRITE_HELD(&dn->dn_struct_rwlock)); dnode_setdirty(dn, tx); dn->dn_rm_spillblk[tx->tx_txg & TXG_MASK] = DN_KILL_SPILLBLK; dn->dn_have_spill = B_FALSE; } static void dnode_setdblksz(dnode_t *dn, int size) { ASSERT0(P2PHASE(size, SPA_MINBLOCKSIZE)); ASSERT3U(size, <=, SPA_MAXBLOCKSIZE); ASSERT3U(size, >=, SPA_MINBLOCKSIZE); ASSERT3U(size >> SPA_MINBLOCKSHIFT, <, 1<<(sizeof (dn->dn_phys->dn_datablkszsec) * 8)); dn->dn_datablksz = size; dn->dn_datablkszsec = size >> SPA_MINBLOCKSHIFT; dn->dn_datablkshift = ISP2(size) ? highbit64(size - 1) : 0; } static dnode_t * dnode_create(objset_t *os, dnode_phys_t *dnp, dmu_buf_impl_t *db, uint64_t object, dnode_handle_t *dnh) { dnode_t *dn; dn = kmem_cache_alloc(dnode_cache, KM_SLEEP); dn->dn_moved = 0; /* * Defer setting dn_objset until the dnode is ready to be a candidate * for the dnode_move() callback. */ dn->dn_object = object; dn->dn_dbuf = db; dn->dn_handle = dnh; dn->dn_phys = dnp; if (dnp->dn_datablkszsec) { dnode_setdblksz(dn, dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT); } else { dn->dn_datablksz = 0; dn->dn_datablkszsec = 0; dn->dn_datablkshift = 0; } dn->dn_indblkshift = dnp->dn_indblkshift; dn->dn_nlevels = dnp->dn_nlevels; dn->dn_type = dnp->dn_type; dn->dn_nblkptr = dnp->dn_nblkptr; dn->dn_checksum = dnp->dn_checksum; dn->dn_compress = dnp->dn_compress; dn->dn_bonustype = dnp->dn_bonustype; dn->dn_bonuslen = dnp->dn_bonuslen; dn->dn_num_slots = dnp->dn_extra_slots + 1; dn->dn_maxblkid = dnp->dn_maxblkid; dn->dn_have_spill = ((dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) != 0); dn->dn_id_flags = 0; dmu_zfetch_init(&dn->dn_zfetch, dn); ASSERT(DMU_OT_IS_VALID(dn->dn_phys->dn_type)); ASSERT(zrl_is_locked(&dnh->dnh_zrlock)); ASSERT(!DN_SLOT_IS_PTR(dnh->dnh_dnode)); mutex_enter(&os->os_lock); /* * Exclude special dnodes from os_dnodes so an empty os_dnodes * signifies that the special dnodes have no references from * their children (the entries in os_dnodes). This allows * dnode_destroy() to easily determine if the last child has * been removed and then complete eviction of the objset. */ if (!DMU_OBJECT_IS_SPECIAL(object)) list_insert_head(&os->os_dnodes, dn); membar_producer(); /* * Everything else must be valid before assigning dn_objset * makes the dnode eligible for dnode_move(). */ dn->dn_objset = os; dnh->dnh_dnode = dn; mutex_exit(&os->os_lock); arc_space_consume(sizeof (dnode_t), ARC_SPACE_DNODE); return (dn); } /* * Caller must be holding the dnode handle, which is released upon return. */ static void dnode_destroy(dnode_t *dn) { objset_t *os = dn->dn_objset; boolean_t complete_os_eviction = B_FALSE; ASSERT((dn->dn_id_flags & DN_ID_NEW_EXIST) == 0); mutex_enter(&os->os_lock); POINTER_INVALIDATE(&dn->dn_objset); if (!DMU_OBJECT_IS_SPECIAL(dn->dn_object)) { list_remove(&os->os_dnodes, dn); complete_os_eviction = list_is_empty(&os->os_dnodes) && list_link_active(&os->os_evicting_node); } mutex_exit(&os->os_lock); /* the dnode can no longer move, so we can release the handle */ if (!zrl_is_locked(&dn->dn_handle->dnh_zrlock)) zrl_remove(&dn->dn_handle->dnh_zrlock); dn->dn_allocated_txg = 0; dn->dn_free_txg = 0; dn->dn_assigned_txg = 0; dn->dn_dirty_txg = 0; dn->dn_dirtyctx = 0; dn->dn_dirtyctx_firstset = NULL; if (dn->dn_bonus != NULL) { mutex_enter(&dn->dn_bonus->db_mtx); dbuf_destroy(dn->dn_bonus); dn->dn_bonus = NULL; } dn->dn_zio = NULL; dn->dn_have_spill = B_FALSE; dn->dn_oldused = 0; dn->dn_oldflags = 0; dn->dn_olduid = 0; dn->dn_oldgid = 0; dn->dn_oldprojid = ZFS_DEFAULT_PROJID; dn->dn_newuid = 0; dn->dn_newgid = 0; dn->dn_newprojid = ZFS_DEFAULT_PROJID; dn->dn_id_flags = 0; dmu_zfetch_fini(&dn->dn_zfetch); kmem_cache_free(dnode_cache, dn); arc_space_return(sizeof (dnode_t), ARC_SPACE_DNODE); if (complete_os_eviction) dmu_objset_evict_done(os); } void dnode_allocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, int ibs, dmu_object_type_t bonustype, int bonuslen, int dn_slots, dmu_tx_t *tx) { int i; ASSERT3U(dn_slots, >, 0); ASSERT3U(dn_slots << DNODE_SHIFT, <=, spa_maxdnodesize(dmu_objset_spa(dn->dn_objset))); ASSERT3U(blocksize, <=, spa_maxblocksize(dmu_objset_spa(dn->dn_objset))); if (blocksize == 0) blocksize = 1 << zfs_default_bs; else blocksize = P2ROUNDUP(blocksize, SPA_MINBLOCKSIZE); if (ibs == 0) ibs = zfs_default_ibs; ibs = MIN(MAX(ibs, DN_MIN_INDBLKSHIFT), DN_MAX_INDBLKSHIFT); dprintf("os=%p obj=%llu txg=%llu blocksize=%d ibs=%d dn_slots=%d\n", dn->dn_objset, (u_longlong_t)dn->dn_object, (u_longlong_t)tx->tx_txg, blocksize, ibs, dn_slots); DNODE_STAT_BUMP(dnode_allocate); ASSERT(dn->dn_type == DMU_OT_NONE); ASSERT(bcmp(dn->dn_phys, &dnode_phys_zero, sizeof (dnode_phys_t)) == 0); ASSERT(dn->dn_phys->dn_type == DMU_OT_NONE); ASSERT(ot != DMU_OT_NONE); ASSERT(DMU_OT_IS_VALID(ot)); ASSERT((bonustype == DMU_OT_NONE && bonuslen == 0) || (bonustype == DMU_OT_SA && bonuslen == 0) || (bonustype != DMU_OT_NONE && bonuslen != 0)); ASSERT(DMU_OT_IS_VALID(bonustype)); ASSERT3U(bonuslen, <=, DN_SLOTS_TO_BONUSLEN(dn_slots)); ASSERT(dn->dn_type == DMU_OT_NONE); ASSERT0(dn->dn_maxblkid); ASSERT0(dn->dn_allocated_txg); ASSERT0(dn->dn_assigned_txg); ASSERT(zfs_refcount_is_zero(&dn->dn_tx_holds)); ASSERT3U(zfs_refcount_count(&dn->dn_holds), <=, 1); ASSERT(avl_is_empty(&dn->dn_dbufs)); for (i = 0; i < TXG_SIZE; i++) { ASSERT0(dn->dn_next_nblkptr[i]); ASSERT0(dn->dn_next_nlevels[i]); ASSERT0(dn->dn_next_indblkshift[i]); ASSERT0(dn->dn_next_bonuslen[i]); ASSERT0(dn->dn_next_bonustype[i]); ASSERT0(dn->dn_rm_spillblk[i]); ASSERT0(dn->dn_next_blksz[i]); ASSERT0(dn->dn_next_maxblkid[i]); ASSERT(!multilist_link_active(&dn->dn_dirty_link[i])); ASSERT3P(list_head(&dn->dn_dirty_records[i]), ==, NULL); ASSERT3P(dn->dn_free_ranges[i], ==, NULL); } dn->dn_type = ot; dnode_setdblksz(dn, blocksize); dn->dn_indblkshift = ibs; dn->dn_nlevels = 1; dn->dn_num_slots = dn_slots; if (bonustype == DMU_OT_SA) /* Maximize bonus space for SA */ dn->dn_nblkptr = 1; else { dn->dn_nblkptr = MIN(DN_MAX_NBLKPTR, 1 + ((DN_SLOTS_TO_BONUSLEN(dn_slots) - bonuslen) >> SPA_BLKPTRSHIFT)); } dn->dn_bonustype = bonustype; dn->dn_bonuslen = bonuslen; dn->dn_checksum = ZIO_CHECKSUM_INHERIT; dn->dn_compress = ZIO_COMPRESS_INHERIT; dn->dn_dirtyctx = 0; dn->dn_free_txg = 0; dn->dn_dirtyctx_firstset = NULL; dn->dn_dirty_txg = 0; dn->dn_allocated_txg = tx->tx_txg; dn->dn_id_flags = 0; dnode_setdirty(dn, tx); dn->dn_next_indblkshift[tx->tx_txg & TXG_MASK] = ibs; dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = dn->dn_bonuslen; dn->dn_next_bonustype[tx->tx_txg & TXG_MASK] = dn->dn_bonustype; dn->dn_next_blksz[tx->tx_txg & TXG_MASK] = dn->dn_datablksz; } void dnode_reallocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, dmu_object_type_t bonustype, int bonuslen, int dn_slots, boolean_t keep_spill, dmu_tx_t *tx) { int nblkptr; ASSERT3U(blocksize, >=, SPA_MINBLOCKSIZE); ASSERT3U(blocksize, <=, spa_maxblocksize(dmu_objset_spa(dn->dn_objset))); ASSERT0(blocksize % SPA_MINBLOCKSIZE); ASSERT(dn->dn_object != DMU_META_DNODE_OBJECT || dmu_tx_private_ok(tx)); ASSERT(tx->tx_txg != 0); ASSERT((bonustype == DMU_OT_NONE && bonuslen == 0) || (bonustype != DMU_OT_NONE && bonuslen != 0) || (bonustype == DMU_OT_SA && bonuslen == 0)); ASSERT(DMU_OT_IS_VALID(bonustype)); ASSERT3U(bonuslen, <=, DN_BONUS_SIZE(spa_maxdnodesize(dmu_objset_spa(dn->dn_objset)))); ASSERT3U(bonuslen, <=, DN_BONUS_SIZE(dn_slots << DNODE_SHIFT)); dnode_free_interior_slots(dn); DNODE_STAT_BUMP(dnode_reallocate); /* clean up any unreferenced dbufs */ dnode_evict_dbufs(dn); dn->dn_id_flags = 0; rw_enter(&dn->dn_struct_rwlock, RW_WRITER); dnode_setdirty(dn, tx); if (dn->dn_datablksz != blocksize) { /* change blocksize */ ASSERT0(dn->dn_maxblkid); ASSERT(BP_IS_HOLE(&dn->dn_phys->dn_blkptr[0]) || dnode_block_freed(dn, 0)); dnode_setdblksz(dn, blocksize); dn->dn_next_blksz[tx->tx_txg & TXG_MASK] = blocksize; } if (dn->dn_bonuslen != bonuslen) dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = bonuslen; if (bonustype == DMU_OT_SA) /* Maximize bonus space for SA */ nblkptr = 1; else nblkptr = MIN(DN_MAX_NBLKPTR, 1 + ((DN_SLOTS_TO_BONUSLEN(dn_slots) - bonuslen) >> SPA_BLKPTRSHIFT)); if (dn->dn_bonustype != bonustype) dn->dn_next_bonustype[tx->tx_txg & TXG_MASK] = bonustype; if (dn->dn_nblkptr != nblkptr) dn->dn_next_nblkptr[tx->tx_txg & TXG_MASK] = nblkptr; if (dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR && !keep_spill) { dbuf_rm_spill(dn, tx); dnode_rm_spill(dn, tx); } rw_exit(&dn->dn_struct_rwlock); /* change type */ dn->dn_type = ot; /* change bonus size and type */ mutex_enter(&dn->dn_mtx); dn->dn_bonustype = bonustype; dn->dn_bonuslen = bonuslen; dn->dn_num_slots = dn_slots; dn->dn_nblkptr = nblkptr; dn->dn_checksum = ZIO_CHECKSUM_INHERIT; dn->dn_compress = ZIO_COMPRESS_INHERIT; ASSERT3U(dn->dn_nblkptr, <=, DN_MAX_NBLKPTR); /* fix up the bonus db_size */ if (dn->dn_bonus) { dn->dn_bonus->db.db_size = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots) - (dn->dn_nblkptr-1) * sizeof (blkptr_t); ASSERT(dn->dn_bonuslen <= dn->dn_bonus->db.db_size); } dn->dn_allocated_txg = tx->tx_txg; mutex_exit(&dn->dn_mtx); } #ifdef _KERNEL static void dnode_move_impl(dnode_t *odn, dnode_t *ndn) { int i; ASSERT(!RW_LOCK_HELD(&odn->dn_struct_rwlock)); ASSERT(MUTEX_NOT_HELD(&odn->dn_mtx)); ASSERT(MUTEX_NOT_HELD(&odn->dn_dbufs_mtx)); /* Copy fields. */ ndn->dn_objset = odn->dn_objset; ndn->dn_object = odn->dn_object; ndn->dn_dbuf = odn->dn_dbuf; ndn->dn_handle = odn->dn_handle; ndn->dn_phys = odn->dn_phys; ndn->dn_type = odn->dn_type; ndn->dn_bonuslen = odn->dn_bonuslen; ndn->dn_bonustype = odn->dn_bonustype; ndn->dn_nblkptr = odn->dn_nblkptr; ndn->dn_checksum = odn->dn_checksum; ndn->dn_compress = odn->dn_compress; ndn->dn_nlevels = odn->dn_nlevels; ndn->dn_indblkshift = odn->dn_indblkshift; ndn->dn_datablkshift = odn->dn_datablkshift; ndn->dn_datablkszsec = odn->dn_datablkszsec; ndn->dn_datablksz = odn->dn_datablksz; ndn->dn_maxblkid = odn->dn_maxblkid; ndn->dn_num_slots = odn->dn_num_slots; bcopy(&odn->dn_next_type[0], &ndn->dn_next_type[0], sizeof (odn->dn_next_type)); bcopy(&odn->dn_next_nblkptr[0], &ndn->dn_next_nblkptr[0], sizeof (odn->dn_next_nblkptr)); bcopy(&odn->dn_next_nlevels[0], &ndn->dn_next_nlevels[0], sizeof (odn->dn_next_nlevels)); bcopy(&odn->dn_next_indblkshift[0], &ndn->dn_next_indblkshift[0], sizeof (odn->dn_next_indblkshift)); bcopy(&odn->dn_next_bonustype[0], &ndn->dn_next_bonustype[0], sizeof (odn->dn_next_bonustype)); bcopy(&odn->dn_rm_spillblk[0], &ndn->dn_rm_spillblk[0], sizeof (odn->dn_rm_spillblk)); bcopy(&odn->dn_next_bonuslen[0], &ndn->dn_next_bonuslen[0], sizeof (odn->dn_next_bonuslen)); bcopy(&odn->dn_next_blksz[0], &ndn->dn_next_blksz[0], sizeof (odn->dn_next_blksz)); bcopy(&odn->dn_next_maxblkid[0], &ndn->dn_next_maxblkid[0], sizeof (odn->dn_next_maxblkid)); for (i = 0; i < TXG_SIZE; i++) { list_move_tail(&ndn->dn_dirty_records[i], &odn->dn_dirty_records[i]); } bcopy(&odn->dn_free_ranges[0], &ndn->dn_free_ranges[0], sizeof (odn->dn_free_ranges)); ndn->dn_allocated_txg = odn->dn_allocated_txg; ndn->dn_free_txg = odn->dn_free_txg; ndn->dn_assigned_txg = odn->dn_assigned_txg; ndn->dn_dirty_txg = odn->dn_dirty_txg; ndn->dn_dirtyctx = odn->dn_dirtyctx; ndn->dn_dirtyctx_firstset = odn->dn_dirtyctx_firstset; ASSERT(zfs_refcount_count(&odn->dn_tx_holds) == 0); zfs_refcount_transfer(&ndn->dn_holds, &odn->dn_holds); ASSERT(avl_is_empty(&ndn->dn_dbufs)); avl_swap(&ndn->dn_dbufs, &odn->dn_dbufs); ndn->dn_dbufs_count = odn->dn_dbufs_count; ndn->dn_bonus = odn->dn_bonus; ndn->dn_have_spill = odn->dn_have_spill; ndn->dn_zio = odn->dn_zio; ndn->dn_oldused = odn->dn_oldused; ndn->dn_oldflags = odn->dn_oldflags; ndn->dn_olduid = odn->dn_olduid; ndn->dn_oldgid = odn->dn_oldgid; ndn->dn_oldprojid = odn->dn_oldprojid; ndn->dn_newuid = odn->dn_newuid; ndn->dn_newgid = odn->dn_newgid; ndn->dn_newprojid = odn->dn_newprojid; ndn->dn_id_flags = odn->dn_id_flags; dmu_zfetch_init(&ndn->dn_zfetch, ndn); /* * Update back pointers. Updating the handle fixes the back pointer of * every descendant dbuf as well as the bonus dbuf. */ ASSERT(ndn->dn_handle->dnh_dnode == odn); ndn->dn_handle->dnh_dnode = ndn; /* * Invalidate the original dnode by clearing all of its back pointers. */ odn->dn_dbuf = NULL; odn->dn_handle = NULL; avl_create(&odn->dn_dbufs, dbuf_compare, sizeof (dmu_buf_impl_t), offsetof(dmu_buf_impl_t, db_link)); odn->dn_dbufs_count = 0; odn->dn_bonus = NULL; dmu_zfetch_fini(&odn->dn_zfetch); /* * Set the low bit of the objset pointer to ensure that dnode_move() * recognizes the dnode as invalid in any subsequent callback. */ POINTER_INVALIDATE(&odn->dn_objset); /* * Satisfy the destructor. */ for (i = 0; i < TXG_SIZE; i++) { list_create(&odn->dn_dirty_records[i], sizeof (dbuf_dirty_record_t), offsetof(dbuf_dirty_record_t, dr_dirty_node)); odn->dn_free_ranges[i] = NULL; odn->dn_next_nlevels[i] = 0; odn->dn_next_indblkshift[i] = 0; odn->dn_next_bonustype[i] = 0; odn->dn_rm_spillblk[i] = 0; odn->dn_next_bonuslen[i] = 0; odn->dn_next_blksz[i] = 0; } odn->dn_allocated_txg = 0; odn->dn_free_txg = 0; odn->dn_assigned_txg = 0; odn->dn_dirty_txg = 0; odn->dn_dirtyctx = 0; odn->dn_dirtyctx_firstset = NULL; odn->dn_have_spill = B_FALSE; odn->dn_zio = NULL; odn->dn_oldused = 0; odn->dn_oldflags = 0; odn->dn_olduid = 0; odn->dn_oldgid = 0; odn->dn_oldprojid = ZFS_DEFAULT_PROJID; odn->dn_newuid = 0; odn->dn_newgid = 0; odn->dn_newprojid = ZFS_DEFAULT_PROJID; odn->dn_id_flags = 0; /* * Mark the dnode. */ ndn->dn_moved = 1; odn->dn_moved = (uint8_t)-1; } /*ARGSUSED*/ static kmem_cbrc_t dnode_move(void *buf, void *newbuf, size_t size, void *arg) { dnode_t *odn = buf, *ndn = newbuf; objset_t *os; int64_t refcount; uint32_t dbufs; /* * The dnode is on the objset's list of known dnodes if the objset * pointer is valid. We set the low bit of the objset pointer when * freeing the dnode to invalidate it, and the memory patterns written * by kmem (baddcafe and deadbeef) set at least one of the two low bits. * A newly created dnode sets the objset pointer last of all to indicate * that the dnode is known and in a valid state to be moved by this * function. */ os = odn->dn_objset; if (!POINTER_IS_VALID(os)) { DNODE_STAT_BUMP(dnode_move_invalid); return (KMEM_CBRC_DONT_KNOW); } /* * Ensure that the objset does not go away during the move. */ rw_enter(&os_lock, RW_WRITER); if (os != odn->dn_objset) { rw_exit(&os_lock); DNODE_STAT_BUMP(dnode_move_recheck1); return (KMEM_CBRC_DONT_KNOW); } /* * If the dnode is still valid, then so is the objset. We know that no * valid objset can be freed while we hold os_lock, so we can safely * ensure that the objset remains in use. */ mutex_enter(&os->os_lock); /* * Recheck the objset pointer in case the dnode was removed just before * acquiring the lock. */ if (os != odn->dn_objset) { mutex_exit(&os->os_lock); rw_exit(&os_lock); DNODE_STAT_BUMP(dnode_move_recheck2); return (KMEM_CBRC_DONT_KNOW); } /* * At this point we know that as long as we hold os->os_lock, the dnode * cannot be freed and fields within the dnode can be safely accessed. * The objset listing this dnode cannot go away as long as this dnode is * on its list. */ rw_exit(&os_lock); if (DMU_OBJECT_IS_SPECIAL(odn->dn_object)) { mutex_exit(&os->os_lock); DNODE_STAT_BUMP(dnode_move_special); return (KMEM_CBRC_NO); } ASSERT(odn->dn_dbuf != NULL); /* only "special" dnodes have no parent */ /* * Lock the dnode handle to prevent the dnode from obtaining any new * holds. This also prevents the descendant dbufs and the bonus dbuf * from accessing the dnode, so that we can discount their holds. The * handle is safe to access because we know that while the dnode cannot * go away, neither can its handle. Once we hold dnh_zrlock, we can * safely move any dnode referenced only by dbufs. */ if (!zrl_tryenter(&odn->dn_handle->dnh_zrlock)) { mutex_exit(&os->os_lock); DNODE_STAT_BUMP(dnode_move_handle); return (KMEM_CBRC_LATER); } /* * Ensure a consistent view of the dnode's holds and the dnode's dbufs. * We need to guarantee that there is a hold for every dbuf in order to * determine whether the dnode is actively referenced. Falsely matching * a dbuf to an active hold would lead to an unsafe move. It's possible * that a thread already having an active dnode hold is about to add a * dbuf, and we can't compare hold and dbuf counts while the add is in * progress. */ if (!rw_tryenter(&odn->dn_struct_rwlock, RW_WRITER)) { zrl_exit(&odn->dn_handle->dnh_zrlock); mutex_exit(&os->os_lock); DNODE_STAT_BUMP(dnode_move_rwlock); return (KMEM_CBRC_LATER); } /* * A dbuf may be removed (evicted) without an active dnode hold. In that * case, the dbuf count is decremented under the handle lock before the * dbuf's hold is released. This order ensures that if we count the hold * after the dbuf is removed but before its hold is released, we will * treat the unmatched hold as active and exit safely. If we count the * hold before the dbuf is removed, the hold is discounted, and the * removal is blocked until the move completes. */ refcount = zfs_refcount_count(&odn->dn_holds); ASSERT(refcount >= 0); dbufs = DN_DBUFS_COUNT(odn); /* We can't have more dbufs than dnode holds. */ ASSERT3U(dbufs, <=, refcount); DTRACE_PROBE3(dnode__move, dnode_t *, odn, int64_t, refcount, uint32_t, dbufs); if (refcount > dbufs) { rw_exit(&odn->dn_struct_rwlock); zrl_exit(&odn->dn_handle->dnh_zrlock); mutex_exit(&os->os_lock); DNODE_STAT_BUMP(dnode_move_active); return (KMEM_CBRC_LATER); } rw_exit(&odn->dn_struct_rwlock); /* * At this point we know that anyone with a hold on the dnode is not * actively referencing it. The dnode is known and in a valid state to * move. We're holding the locks needed to execute the critical section. */ dnode_move_impl(odn, ndn); list_link_replace(&odn->dn_link, &ndn->dn_link); /* If the dnode was safe to move, the refcount cannot have changed. */ ASSERT(refcount == zfs_refcount_count(&ndn->dn_holds)); ASSERT(dbufs == DN_DBUFS_COUNT(ndn)); zrl_exit(&ndn->dn_handle->dnh_zrlock); /* handle has moved */ mutex_exit(&os->os_lock); return (KMEM_CBRC_YES); } #endif /* _KERNEL */ static void dnode_slots_hold(dnode_children_t *children, int idx, int slots) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; zrl_add(&dnh->dnh_zrlock); } } static void dnode_slots_rele(dnode_children_t *children, int idx, int slots) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; if (zrl_is_locked(&dnh->dnh_zrlock)) zrl_exit(&dnh->dnh_zrlock); else zrl_remove(&dnh->dnh_zrlock); } } static int dnode_slots_tryenter(dnode_children_t *children, int idx, int slots) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; if (!zrl_tryenter(&dnh->dnh_zrlock)) { for (int j = idx; j < i; j++) { dnh = &children->dnc_children[j]; zrl_exit(&dnh->dnh_zrlock); } return (0); } } return (1); } static void dnode_set_slots(dnode_children_t *children, int idx, int slots, void *ptr) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; dnh->dnh_dnode = ptr; } } static boolean_t dnode_check_slots_free(dnode_children_t *children, int idx, int slots) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); /* * If all dnode slots are either already free or * evictable return B_TRUE. */ for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; dnode_t *dn = dnh->dnh_dnode; if (dn == DN_SLOT_FREE) { continue; } else if (DN_SLOT_IS_PTR(dn)) { mutex_enter(&dn->dn_mtx); boolean_t can_free = (dn->dn_type == DMU_OT_NONE && zfs_refcount_is_zero(&dn->dn_holds) && !DNODE_IS_DIRTY(dn)); mutex_exit(&dn->dn_mtx); if (!can_free) return (B_FALSE); else continue; } else { return (B_FALSE); } } return (B_TRUE); } static void dnode_reclaim_slots(dnode_children_t *children, int idx, int slots) { ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); for (int i = idx; i < idx + slots; i++) { dnode_handle_t *dnh = &children->dnc_children[i]; ASSERT(zrl_is_locked(&dnh->dnh_zrlock)); if (DN_SLOT_IS_PTR(dnh->dnh_dnode)) { ASSERT3S(dnh->dnh_dnode->dn_type, ==, DMU_OT_NONE); dnode_destroy(dnh->dnh_dnode); dnh->dnh_dnode = DN_SLOT_FREE; } } } void dnode_free_interior_slots(dnode_t *dn) { dnode_children_t *children = dmu_buf_get_user(&dn->dn_dbuf->db); int epb = dn->dn_dbuf->db.db_size >> DNODE_SHIFT; int idx = (dn->dn_object & (epb - 1)) + 1; int slots = dn->dn_num_slots - 1; if (slots == 0) return; ASSERT3S(idx + slots, <=, DNODES_PER_BLOCK); while (!dnode_slots_tryenter(children, idx, slots)) { DNODE_STAT_BUMP(dnode_free_interior_lock_retry); cond_resched(); } dnode_set_slots(children, idx, slots, DN_SLOT_FREE); dnode_slots_rele(children, idx, slots); } void dnode_special_close(dnode_handle_t *dnh) { dnode_t *dn = dnh->dnh_dnode; /* * Ensure dnode_rele_and_unlock() has released dn_mtx, after final * zfs_refcount_remove() */ mutex_enter(&dn->dn_mtx); if (zfs_refcount_count(&dn->dn_holds) > 0) cv_wait(&dn->dn_nodnholds, &dn->dn_mtx); mutex_exit(&dn->dn_mtx); ASSERT3U(zfs_refcount_count(&dn->dn_holds), ==, 0); ASSERT(dn->dn_dbuf == NULL || dmu_buf_get_user(&dn->dn_dbuf->db) == NULL); zrl_add(&dnh->dnh_zrlock); dnode_destroy(dn); /* implicit zrl_remove() */ zrl_destroy(&dnh->dnh_zrlock); dnh->dnh_dnode = NULL; } void dnode_special_open(objset_t *os, dnode_phys_t *dnp, uint64_t object, dnode_handle_t *dnh) { dnode_t *dn; zrl_init(&dnh->dnh_zrlock); VERIFY3U(1, ==, zrl_tryenter(&dnh->dnh_zrlock)); dn = dnode_create(os, dnp, NULL, object, dnh); DNODE_VERIFY(dn); zrl_exit(&dnh->dnh_zrlock); } static void dnode_buf_evict_async(void *dbu) { dnode_children_t *dnc = dbu; DNODE_STAT_BUMP(dnode_buf_evict); for (int i = 0; i < dnc->dnc_count; i++) { dnode_handle_t *dnh = &dnc->dnc_children[i]; dnode_t *dn; /* * The dnode handle lock guards against the dnode moving to * another valid address, so there is no need here to guard * against changes to or from NULL. */ if (!DN_SLOT_IS_PTR(dnh->dnh_dnode)) { zrl_destroy(&dnh->dnh_zrlock); dnh->dnh_dnode = DN_SLOT_UNINIT; continue; } zrl_add(&dnh->dnh_zrlock); dn = dnh->dnh_dnode; /* * If there are holds on this dnode, then there should * be holds on the dnode's containing dbuf as well; thus * it wouldn't be eligible for eviction and this function * would not have been called. */ ASSERT(zfs_refcount_is_zero(&dn->dn_holds)); ASSERT(zfs_refcount_is_zero(&dn->dn_tx_holds)); dnode_destroy(dn); /* implicit zrl_remove() for first slot */ zrl_destroy(&dnh->dnh_zrlock); dnh->dnh_dnode = DN_SLOT_UNINIT; } kmem_free(dnc, sizeof (dnode_children_t) + dnc->dnc_count * sizeof (dnode_handle_t)); } /* * When the DNODE_MUST_BE_FREE flag is set, the "slots" parameter is used * to ensure the hole at the specified object offset is large enough to * hold the dnode being created. The slots parameter is also used to ensure * a dnode does not span multiple dnode blocks. In both of these cases, if * a failure occurs, ENOSPC is returned. Keep in mind, these failure cases * are only possible when using DNODE_MUST_BE_FREE. * * If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. * dnode_hold_impl() will check if the requested dnode is already consumed * as an extra dnode slot by an large dnode, in which case it returns * ENOENT. * * If the DNODE_DRY_RUN flag is set, we don't actually hold the dnode, just * return whether the hold would succeed or not. tag and dnp should set to * NULL in this case. * * errors: * EINVAL - Invalid object number or flags. * ENOSPC - Hole too small to fulfill "slots" request (DNODE_MUST_BE_FREE) * EEXIST - Refers to an allocated dnode (DNODE_MUST_BE_FREE) * - Refers to a freeing dnode (DNODE_MUST_BE_FREE) * - Refers to an interior dnode slot (DNODE_MUST_BE_ALLOCATED) * ENOENT - The requested dnode is not allocated (DNODE_MUST_BE_ALLOCATED) * - The requested dnode is being freed (DNODE_MUST_BE_ALLOCATED) * EIO - I/O error when reading the meta dnode dbuf. * * succeeds even for free dnodes. */ int dnode_hold_impl(objset_t *os, uint64_t object, int flag, int slots, void *tag, dnode_t **dnp) { int epb, idx, err; int drop_struct_lock = FALSE; int type; uint64_t blk; dnode_t *mdn, *dn; dmu_buf_impl_t *db; dnode_children_t *dnc; dnode_phys_t *dn_block; dnode_handle_t *dnh; ASSERT(!(flag & DNODE_MUST_BE_ALLOCATED) || (slots == 0)); ASSERT(!(flag & DNODE_MUST_BE_FREE) || (slots > 0)); IMPLY(flag & DNODE_DRY_RUN, (tag == NULL) && (dnp == NULL)); /* * If you are holding the spa config lock as writer, you shouldn't * be asking the DMU to do *anything* unless it's the root pool * which may require us to read from the root filesystem while * holding some (not all) of the locks as writer. */ ASSERT(spa_config_held(os->os_spa, SCL_ALL, RW_WRITER) == 0 || (spa_is_root(os->os_spa) && spa_config_held(os->os_spa, SCL_STATE, RW_WRITER))); ASSERT((flag & DNODE_MUST_BE_ALLOCATED) || (flag & DNODE_MUST_BE_FREE)); if (object == DMU_USERUSED_OBJECT || object == DMU_GROUPUSED_OBJECT || object == DMU_PROJECTUSED_OBJECT) { if (object == DMU_USERUSED_OBJECT) dn = DMU_USERUSED_DNODE(os); else if (object == DMU_GROUPUSED_OBJECT) dn = DMU_GROUPUSED_DNODE(os); else dn = DMU_PROJECTUSED_DNODE(os); if (dn == NULL) return (SET_ERROR(ENOENT)); type = dn->dn_type; if ((flag & DNODE_MUST_BE_ALLOCATED) && type == DMU_OT_NONE) return (SET_ERROR(ENOENT)); if ((flag & DNODE_MUST_BE_FREE) && type != DMU_OT_NONE) return (SET_ERROR(EEXIST)); DNODE_VERIFY(dn); /* Don't actually hold if dry run, just return 0 */ if (!(flag & DNODE_DRY_RUN)) { (void) zfs_refcount_add(&dn->dn_holds, tag); *dnp = dn; } return (0); } if (object == 0 || object >= DN_MAX_OBJECT) return (SET_ERROR(EINVAL)); mdn = DMU_META_DNODE(os); ASSERT(mdn->dn_object == DMU_META_DNODE_OBJECT); DNODE_VERIFY(mdn); if (!RW_WRITE_HELD(&mdn->dn_struct_rwlock)) { rw_enter(&mdn->dn_struct_rwlock, RW_READER); drop_struct_lock = TRUE; } blk = dbuf_whichblock(mdn, 0, object * sizeof (dnode_phys_t)); db = dbuf_hold(mdn, blk, FTAG); if (drop_struct_lock) rw_exit(&mdn->dn_struct_rwlock); if (db == NULL) { DNODE_STAT_BUMP(dnode_hold_dbuf_hold); return (SET_ERROR(EIO)); } /* * We do not need to decrypt to read the dnode so it doesn't matter * if we get the encrypted or decrypted version. */ err = dbuf_read(db, NULL, DB_RF_CANFAIL | DB_RF_NO_DECRYPT | DB_RF_NOPREFETCH); if (err) { DNODE_STAT_BUMP(dnode_hold_dbuf_read); dbuf_rele(db, FTAG); return (err); } ASSERT3U(db->db.db_size, >=, 1<db.db_size >> DNODE_SHIFT; idx = object & (epb - 1); dn_block = (dnode_phys_t *)db->db.db_data; ASSERT(DB_DNODE(db)->dn_type == DMU_OT_DNODE); dnc = dmu_buf_get_user(&db->db); dnh = NULL; if (dnc == NULL) { dnode_children_t *winner; int skip = 0; dnc = kmem_zalloc(sizeof (dnode_children_t) + epb * sizeof (dnode_handle_t), KM_SLEEP); dnc->dnc_count = epb; dnh = &dnc->dnc_children[0]; /* Initialize dnode slot status from dnode_phys_t */ for (int i = 0; i < epb; i++) { zrl_init(&dnh[i].dnh_zrlock); if (skip) { skip--; continue; } if (dn_block[i].dn_type != DMU_OT_NONE) { int interior = dn_block[i].dn_extra_slots; dnode_set_slots(dnc, i, 1, DN_SLOT_ALLOCATED); dnode_set_slots(dnc, i + 1, interior, DN_SLOT_INTERIOR); skip = interior; } else { dnh[i].dnh_dnode = DN_SLOT_FREE; skip = 0; } } dmu_buf_init_user(&dnc->dnc_dbu, NULL, dnode_buf_evict_async, NULL); winner = dmu_buf_set_user(&db->db, &dnc->dnc_dbu); if (winner != NULL) { for (int i = 0; i < epb; i++) zrl_destroy(&dnh[i].dnh_zrlock); kmem_free(dnc, sizeof (dnode_children_t) + epb * sizeof (dnode_handle_t)); dnc = winner; } } ASSERT(dnc->dnc_count == epb); if (flag & DNODE_MUST_BE_ALLOCATED) { slots = 1; dnode_slots_hold(dnc, idx, slots); dnh = &dnc->dnc_children[idx]; if (DN_SLOT_IS_PTR(dnh->dnh_dnode)) { dn = dnh->dnh_dnode; } else if (dnh->dnh_dnode == DN_SLOT_INTERIOR) { DNODE_STAT_BUMP(dnode_hold_alloc_interior); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(EEXIST)); } else if (dnh->dnh_dnode != DN_SLOT_ALLOCATED) { DNODE_STAT_BUMP(dnode_hold_alloc_misses); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(ENOENT)); } else { dnode_slots_rele(dnc, idx, slots); while (!dnode_slots_tryenter(dnc, idx, slots)) { DNODE_STAT_BUMP(dnode_hold_alloc_lock_retry); cond_resched(); } /* * Someone else won the race and called dnode_create() * after we checked DN_SLOT_IS_PTR() above but before * we acquired the lock. */ if (DN_SLOT_IS_PTR(dnh->dnh_dnode)) { DNODE_STAT_BUMP(dnode_hold_alloc_lock_misses); dn = dnh->dnh_dnode; } else { dn = dnode_create(os, dn_block + idx, db, object, dnh); } } mutex_enter(&dn->dn_mtx); if (dn->dn_type == DMU_OT_NONE || dn->dn_free_txg != 0) { DNODE_STAT_BUMP(dnode_hold_alloc_type_none); mutex_exit(&dn->dn_mtx); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(ENOENT)); } /* Don't actually hold if dry run, just return 0 */ if (flag & DNODE_DRY_RUN) { mutex_exit(&dn->dn_mtx); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (0); } DNODE_STAT_BUMP(dnode_hold_alloc_hits); } else if (flag & DNODE_MUST_BE_FREE) { if (idx + slots - 1 >= DNODES_PER_BLOCK) { DNODE_STAT_BUMP(dnode_hold_free_overflow); dbuf_rele(db, FTAG); return (SET_ERROR(ENOSPC)); } dnode_slots_hold(dnc, idx, slots); if (!dnode_check_slots_free(dnc, idx, slots)) { DNODE_STAT_BUMP(dnode_hold_free_misses); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(ENOSPC)); } dnode_slots_rele(dnc, idx, slots); while (!dnode_slots_tryenter(dnc, idx, slots)) { DNODE_STAT_BUMP(dnode_hold_free_lock_retry); cond_resched(); } if (!dnode_check_slots_free(dnc, idx, slots)) { DNODE_STAT_BUMP(dnode_hold_free_lock_misses); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(ENOSPC)); } /* * Allocated but otherwise free dnodes which would * be in the interior of a multi-slot dnodes need * to be freed. Single slot dnodes can be safely * re-purposed as a performance optimization. */ if (slots > 1) dnode_reclaim_slots(dnc, idx + 1, slots - 1); dnh = &dnc->dnc_children[idx]; if (DN_SLOT_IS_PTR(dnh->dnh_dnode)) { dn = dnh->dnh_dnode; } else { dn = dnode_create(os, dn_block + idx, db, object, dnh); } mutex_enter(&dn->dn_mtx); if (!zfs_refcount_is_zero(&dn->dn_holds) || dn->dn_free_txg) { DNODE_STAT_BUMP(dnode_hold_free_refcount); mutex_exit(&dn->dn_mtx); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (SET_ERROR(EEXIST)); } /* Don't actually hold if dry run, just return 0 */ if (flag & DNODE_DRY_RUN) { mutex_exit(&dn->dn_mtx); dnode_slots_rele(dnc, idx, slots); dbuf_rele(db, FTAG); return (0); } dnode_set_slots(dnc, idx + 1, slots - 1, DN_SLOT_INTERIOR); DNODE_STAT_BUMP(dnode_hold_free_hits); } else { dbuf_rele(db, FTAG); return (SET_ERROR(EINVAL)); } ASSERT0(dn->dn_free_txg); if (zfs_refcount_add(&dn->dn_holds, tag) == 1) dbuf_add_ref(db, dnh); mutex_exit(&dn->dn_mtx); /* Now we can rely on the hold to prevent the dnode from moving. */ dnode_slots_rele(dnc, idx, slots); DNODE_VERIFY(dn); ASSERT3P(dnp, !=, NULL); ASSERT3P(dn->dn_dbuf, ==, db); ASSERT3U(dn->dn_object, ==, object); dbuf_rele(db, FTAG); *dnp = dn; return (0); } /* * Return held dnode if the object is allocated, NULL if not. */ int dnode_hold(objset_t *os, uint64_t object, void *tag, dnode_t **dnp) { return (dnode_hold_impl(os, object, DNODE_MUST_BE_ALLOCATED, 0, tag, dnp)); } /* * Can only add a reference if there is already at least one * reference on the dnode. Returns FALSE if unable to add a * new reference. */ boolean_t dnode_add_ref(dnode_t *dn, void *tag) { mutex_enter(&dn->dn_mtx); if (zfs_refcount_is_zero(&dn->dn_holds)) { mutex_exit(&dn->dn_mtx); return (FALSE); } VERIFY(1 < zfs_refcount_add(&dn->dn_holds, tag)); mutex_exit(&dn->dn_mtx); return (TRUE); } void dnode_rele(dnode_t *dn, void *tag) { mutex_enter(&dn->dn_mtx); dnode_rele_and_unlock(dn, tag, B_FALSE); } void dnode_rele_and_unlock(dnode_t *dn, void *tag, boolean_t evicting) { uint64_t refs; /* Get while the hold prevents the dnode from moving. */ dmu_buf_impl_t *db = dn->dn_dbuf; dnode_handle_t *dnh = dn->dn_handle; refs = zfs_refcount_remove(&dn->dn_holds, tag); if (refs == 0) cv_broadcast(&dn->dn_nodnholds); mutex_exit(&dn->dn_mtx); /* dnode could get destroyed at this point, so don't use it anymore */ /* * It's unsafe to release the last hold on a dnode by dnode_rele() or * indirectly by dbuf_rele() while relying on the dnode handle to * prevent the dnode from moving, since releasing the last hold could * result in the dnode's parent dbuf evicting its dnode handles. For * that reason anyone calling dnode_rele() or dbuf_rele() without some * other direct or indirect hold on the dnode must first drop the dnode * handle. */ ASSERT(refs > 0 || dnh->dnh_zrlock.zr_owner != curthread); /* NOTE: the DNODE_DNODE does not have a dn_dbuf */ if (refs == 0 && db != NULL) { /* * Another thread could add a hold to the dnode handle in * dnode_hold_impl() while holding the parent dbuf. Since the * hold on the parent dbuf prevents the handle from being * destroyed, the hold on the handle is OK. We can't yet assert * that the handle has zero references, but that will be * asserted anyway when the handle gets destroyed. */ mutex_enter(&db->db_mtx); dbuf_rele_and_unlock(db, dnh, evicting); } } /* * Test whether we can create a dnode at the specified location. */ int dnode_try_claim(objset_t *os, uint64_t object, int slots) { return (dnode_hold_impl(os, object, DNODE_MUST_BE_FREE | DNODE_DRY_RUN, slots, NULL, NULL)); } +/* + * Checks if the dnode contains any uncommitted dirty records. + */ +boolean_t +dnode_is_dirty(dnode_t *dn) +{ + mutex_enter(&dn->dn_mtx); + + for (int i = 0; i < TXG_SIZE; i++) { + if (list_head(&dn->dn_dirty_records[i]) != NULL) { + mutex_exit(&dn->dn_mtx); + return (B_TRUE); + } + } + + mutex_exit(&dn->dn_mtx); + + return (B_FALSE); +} + void dnode_setdirty(dnode_t *dn, dmu_tx_t *tx) { objset_t *os = dn->dn_objset; uint64_t txg = tx->tx_txg; if (DMU_OBJECT_IS_SPECIAL(dn->dn_object)) { dsl_dataset_dirty(os->os_dsl_dataset, tx); return; } DNODE_VERIFY(dn); #ifdef ZFS_DEBUG mutex_enter(&dn->dn_mtx); ASSERT(dn->dn_phys->dn_type || dn->dn_allocated_txg); ASSERT(dn->dn_free_txg == 0 || dn->dn_free_txg >= txg); mutex_exit(&dn->dn_mtx); #endif /* * Determine old uid/gid when necessary */ dmu_objset_userquota_get_ids(dn, B_TRUE, tx); multilist_t *dirtylist = &os->os_dirty_dnodes[txg & TXG_MASK]; multilist_sublist_t *mls = multilist_sublist_lock_obj(dirtylist, dn); /* * If we are already marked dirty, we're done. */ if (multilist_link_active(&dn->dn_dirty_link[txg & TXG_MASK])) { multilist_sublist_unlock(mls); return; } ASSERT(!zfs_refcount_is_zero(&dn->dn_holds) || !avl_is_empty(&dn->dn_dbufs)); ASSERT(dn->dn_datablksz != 0); ASSERT0(dn->dn_next_bonuslen[txg & TXG_MASK]); ASSERT0(dn->dn_next_blksz[txg & TXG_MASK]); ASSERT0(dn->dn_next_bonustype[txg & TXG_MASK]); dprintf_ds(os->os_dsl_dataset, "obj=%llu txg=%llu\n", (u_longlong_t)dn->dn_object, (u_longlong_t)txg); multilist_sublist_insert_head(mls, dn); multilist_sublist_unlock(mls); /* * The dnode maintains a hold on its containing dbuf as * long as there are holds on it. Each instantiated child * dbuf maintains a hold on the dnode. When the last child * drops its hold, the dnode will drop its hold on the * containing dbuf. We add a "dirty hold" here so that the * dnode will hang around after we finish processing its * children. */ VERIFY(dnode_add_ref(dn, (void *)(uintptr_t)tx->tx_txg)); (void) dbuf_dirty(dn->dn_dbuf, tx); dsl_dataset_dirty(os->os_dsl_dataset, tx); } void dnode_free(dnode_t *dn, dmu_tx_t *tx) { mutex_enter(&dn->dn_mtx); if (dn->dn_type == DMU_OT_NONE || dn->dn_free_txg) { mutex_exit(&dn->dn_mtx); return; } dn->dn_free_txg = tx->tx_txg; mutex_exit(&dn->dn_mtx); dnode_setdirty(dn, tx); } /* * Try to change the block size for the indicated dnode. This can only * succeed if there are no blocks allocated or dirty beyond first block */ int dnode_set_blksz(dnode_t *dn, uint64_t size, int ibs, dmu_tx_t *tx) { dmu_buf_impl_t *db; int err; ASSERT3U(size, <=, spa_maxblocksize(dmu_objset_spa(dn->dn_objset))); if (size == 0) size = SPA_MINBLOCKSIZE; else size = P2ROUNDUP(size, SPA_MINBLOCKSIZE); if (ibs == dn->dn_indblkshift) ibs = 0; if (size >> SPA_MINBLOCKSHIFT == dn->dn_datablkszsec && ibs == 0) return (0); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); /* Check for any allocated blocks beyond the first */ if (dn->dn_maxblkid != 0) goto fail; mutex_enter(&dn->dn_dbufs_mtx); for (db = avl_first(&dn->dn_dbufs); db != NULL; db = AVL_NEXT(&dn->dn_dbufs, db)) { if (db->db_blkid != 0 && db->db_blkid != DMU_BONUS_BLKID && db->db_blkid != DMU_SPILL_BLKID) { mutex_exit(&dn->dn_dbufs_mtx); goto fail; } } mutex_exit(&dn->dn_dbufs_mtx); if (ibs && dn->dn_nlevels != 1) goto fail; /* resize the old block */ err = dbuf_hold_impl(dn, 0, 0, TRUE, FALSE, FTAG, &db); if (err == 0) { dbuf_new_size(db, size, tx); } else if (err != ENOENT) { goto fail; } dnode_setdblksz(dn, size); dnode_setdirty(dn, tx); dn->dn_next_blksz[tx->tx_txg&TXG_MASK] = size; if (ibs) { dn->dn_indblkshift = ibs; dn->dn_next_indblkshift[tx->tx_txg&TXG_MASK] = ibs; } /* release after we have fixed the blocksize in the dnode */ if (db) dbuf_rele(db, FTAG); rw_exit(&dn->dn_struct_rwlock); return (0); fail: rw_exit(&dn->dn_struct_rwlock); return (SET_ERROR(ENOTSUP)); } static void dnode_set_nlevels_impl(dnode_t *dn, int new_nlevels, dmu_tx_t *tx) { uint64_t txgoff = tx->tx_txg & TXG_MASK; int old_nlevels = dn->dn_nlevels; dmu_buf_impl_t *db; list_t *list; dbuf_dirty_record_t *new, *dr, *dr_next; ASSERT(RW_WRITE_HELD(&dn->dn_struct_rwlock)); ASSERT3U(new_nlevels, >, dn->dn_nlevels); dn->dn_nlevels = new_nlevels; ASSERT3U(new_nlevels, >, dn->dn_next_nlevels[txgoff]); dn->dn_next_nlevels[txgoff] = new_nlevels; /* dirty the left indirects */ db = dbuf_hold_level(dn, old_nlevels, 0, FTAG); ASSERT(db != NULL); new = dbuf_dirty(db, tx); dbuf_rele(db, FTAG); /* transfer the dirty records to the new indirect */ mutex_enter(&dn->dn_mtx); mutex_enter(&new->dt.di.dr_mtx); list = &dn->dn_dirty_records[txgoff]; for (dr = list_head(list); dr; dr = dr_next) { dr_next = list_next(&dn->dn_dirty_records[txgoff], dr); IMPLY(dr->dr_dbuf == NULL, old_nlevels == 1); if (dr->dr_dbuf == NULL || (dr->dr_dbuf->db_level == old_nlevels - 1 && dr->dr_dbuf->db_blkid != DMU_BONUS_BLKID && dr->dr_dbuf->db_blkid != DMU_SPILL_BLKID)) { list_remove(&dn->dn_dirty_records[txgoff], dr); list_insert_tail(&new->dt.di.dr_children, dr); dr->dr_parent = new; } } mutex_exit(&new->dt.di.dr_mtx); mutex_exit(&dn->dn_mtx); } int dnode_set_nlevels(dnode_t *dn, int nlevels, dmu_tx_t *tx) { int ret = 0; rw_enter(&dn->dn_struct_rwlock, RW_WRITER); if (dn->dn_nlevels == nlevels) { ret = 0; goto out; } else if (nlevels < dn->dn_nlevels) { ret = SET_ERROR(EINVAL); goto out; } dnode_set_nlevels_impl(dn, nlevels, tx); out: rw_exit(&dn->dn_struct_rwlock); return (ret); } /* read-holding callers must not rely on the lock being continuously held */ void dnode_new_blkid(dnode_t *dn, uint64_t blkid, dmu_tx_t *tx, boolean_t have_read, boolean_t force) { int epbs, new_nlevels; uint64_t sz; ASSERT(blkid != DMU_BONUS_BLKID); ASSERT(have_read ? RW_READ_HELD(&dn->dn_struct_rwlock) : RW_WRITE_HELD(&dn->dn_struct_rwlock)); /* * if we have a read-lock, check to see if we need to do any work * before upgrading to a write-lock. */ if (have_read) { if (blkid <= dn->dn_maxblkid) return; if (!rw_tryupgrade(&dn->dn_struct_rwlock)) { rw_exit(&dn->dn_struct_rwlock); rw_enter(&dn->dn_struct_rwlock, RW_WRITER); } } /* * Raw sends (indicated by the force flag) require that we take the * given blkid even if the value is lower than the current value. */ if (!force && blkid <= dn->dn_maxblkid) goto out; /* * We use the (otherwise unused) top bit of dn_next_maxblkid[txgoff] * to indicate that this field is set. This allows us to set the * maxblkid to 0 on an existing object in dnode_sync(). */ dn->dn_maxblkid = blkid; dn->dn_next_maxblkid[tx->tx_txg & TXG_MASK] = blkid | DMU_NEXT_MAXBLKID_SET; /* * Compute the number of levels necessary to support the new maxblkid. * Raw sends will ensure nlevels is set correctly for us. */ new_nlevels = 1; epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT; for (sz = dn->dn_nblkptr; sz <= blkid && sz >= dn->dn_nblkptr; sz <<= epbs) new_nlevels++; ASSERT3U(new_nlevels, <=, DN_MAX_LEVELS); if (!force) { if (new_nlevels > dn->dn_nlevels) dnode_set_nlevels_impl(dn, new_nlevels, tx); } else { ASSERT3U(dn->dn_nlevels, >=, new_nlevels); } out: if (have_read) rw_downgrade(&dn->dn_struct_rwlock); } static void dnode_dirty_l1(dnode_t *dn, uint64_t l1blkid, dmu_tx_t *tx) { dmu_buf_impl_t *db = dbuf_hold_level(dn, 1, l1blkid, FTAG); if (db != NULL) { dmu_buf_will_dirty(&db->db, tx); dbuf_rele(db, FTAG); } } /* * Dirty all the in-core level-1 dbufs in the range specified by start_blkid * and end_blkid. */ static void dnode_dirty_l1range(dnode_t *dn, uint64_t start_blkid, uint64_t end_blkid, dmu_tx_t *tx) { dmu_buf_impl_t *db_search; dmu_buf_impl_t *db; avl_index_t where; db_search = kmem_zalloc(sizeof (dmu_buf_impl_t), KM_SLEEP); mutex_enter(&dn->dn_dbufs_mtx); db_search->db_level = 1; db_search->db_blkid = start_blkid + 1; db_search->db_state = DB_SEARCH; for (;;) { db = avl_find(&dn->dn_dbufs, db_search, &where); if (db == NULL) db = avl_nearest(&dn->dn_dbufs, where, AVL_AFTER); if (db == NULL || db->db_level != 1 || db->db_blkid >= end_blkid) { break; } /* * Setup the next blkid we want to search for. */ db_search->db_blkid = db->db_blkid + 1; ASSERT3U(db->db_blkid, >=, start_blkid); /* * If the dbuf transitions to DB_EVICTING while we're trying * to dirty it, then we will be unable to discover it in * the dbuf hash table. This will result in a call to * dbuf_create() which needs to acquire the dn_dbufs_mtx * lock. To avoid a deadlock, we drop the lock before * dirtying the level-1 dbuf. */ mutex_exit(&dn->dn_dbufs_mtx); dnode_dirty_l1(dn, db->db_blkid, tx); mutex_enter(&dn->dn_dbufs_mtx); } #ifdef ZFS_DEBUG /* * Walk all the in-core level-1 dbufs and verify they have been dirtied. */ db_search->db_level = 1; db_search->db_blkid = start_blkid + 1; db_search->db_state = DB_SEARCH; db = avl_find(&dn->dn_dbufs, db_search, &where); if (db == NULL) db = avl_nearest(&dn->dn_dbufs, where, AVL_AFTER); for (; db != NULL; db = AVL_NEXT(&dn->dn_dbufs, db)) { if (db->db_level != 1 || db->db_blkid >= end_blkid) break; if (db->db_state != DB_EVICTING) ASSERT(db->db_dirtycnt > 0); } #endif kmem_free(db_search, sizeof (dmu_buf_impl_t)); mutex_exit(&dn->dn_dbufs_mtx); } void dnode_set_dirtyctx(dnode_t *dn, dmu_tx_t *tx, void *tag) { /* * Don't set dirtyctx to SYNC if we're just modifying this as we * initialize the objset. */ if (dn->dn_dirtyctx == DN_UNDIRTIED) { dsl_dataset_t *ds = dn->dn_objset->os_dsl_dataset; if (ds != NULL) { rrw_enter(&ds->ds_bp_rwlock, RW_READER, tag); } if (!BP_IS_HOLE(dn->dn_objset->os_rootbp)) { if (dmu_tx_is_syncing(tx)) dn->dn_dirtyctx = DN_DIRTY_SYNC; else dn->dn_dirtyctx = DN_DIRTY_OPEN; dn->dn_dirtyctx_firstset = tag; } if (ds != NULL) { rrw_exit(&ds->ds_bp_rwlock, tag); } } } void dnode_free_range(dnode_t *dn, uint64_t off, uint64_t len, dmu_tx_t *tx) { dmu_buf_impl_t *db; uint64_t blkoff, blkid, nblks; int blksz, blkshift, head, tail; int trunc = FALSE; int epbs; blksz = dn->dn_datablksz; blkshift = dn->dn_datablkshift; epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT; if (len == DMU_OBJECT_END) { len = UINT64_MAX - off; trunc = TRUE; } /* * First, block align the region to free: */ if (ISP2(blksz)) { head = P2NPHASE(off, blksz); blkoff = P2PHASE(off, blksz); if ((off >> blkshift) > dn->dn_maxblkid) return; } else { ASSERT(dn->dn_maxblkid == 0); if (off == 0 && len >= blksz) { /* * Freeing the whole block; fast-track this request. */ blkid = 0; nblks = 1; if (dn->dn_nlevels > 1) { rw_enter(&dn->dn_struct_rwlock, RW_WRITER); dnode_dirty_l1(dn, 0, tx); rw_exit(&dn->dn_struct_rwlock); } goto done; } else if (off >= blksz) { /* Freeing past end-of-data */ return; } else { /* Freeing part of the block. */ head = blksz - off; ASSERT3U(head, >, 0); } blkoff = off; } /* zero out any partial block data at the start of the range */ if (head) { int res; ASSERT3U(blkoff + head, ==, blksz); if (len < head) head = len; rw_enter(&dn->dn_struct_rwlock, RW_READER); res = dbuf_hold_impl(dn, 0, dbuf_whichblock(dn, 0, off), TRUE, FALSE, FTAG, &db); rw_exit(&dn->dn_struct_rwlock); if (res == 0) { caddr_t data; boolean_t dirty; db_lock_type_t dblt = dmu_buf_lock_parent(db, RW_READER, FTAG); /* don't dirty if it isn't on disk and isn't dirty */ dirty = !list_is_empty(&db->db_dirty_records) || (db->db_blkptr && !BP_IS_HOLE(db->db_blkptr)); dmu_buf_unlock_parent(db, dblt, FTAG); if (dirty) { dmu_buf_will_dirty(&db->db, tx); data = db->db.db_data; bzero(data + blkoff, head); } dbuf_rele(db, FTAG); } off += head; len -= head; } /* If the range was less than one block, we're done */ if (len == 0) return; /* If the remaining range is past end of file, we're done */ if ((off >> blkshift) > dn->dn_maxblkid) return; ASSERT(ISP2(blksz)); if (trunc) tail = 0; else tail = P2PHASE(len, blksz); ASSERT0(P2PHASE(off, blksz)); /* zero out any partial block data at the end of the range */ if (tail) { int res; if (len < tail) tail = len; rw_enter(&dn->dn_struct_rwlock, RW_READER); res = dbuf_hold_impl(dn, 0, dbuf_whichblock(dn, 0, off+len), TRUE, FALSE, FTAG, &db); rw_exit(&dn->dn_struct_rwlock); if (res == 0) { boolean_t dirty; /* don't dirty if not on disk and not dirty */ db_lock_type_t type = dmu_buf_lock_parent(db, RW_READER, FTAG); dirty = !list_is_empty(&db->db_dirty_records) || (db->db_blkptr && !BP_IS_HOLE(db->db_blkptr)); dmu_buf_unlock_parent(db, type, FTAG); if (dirty) { dmu_buf_will_dirty(&db->db, tx); bzero(db->db.db_data, tail); } dbuf_rele(db, FTAG); } len -= tail; } /* If the range did not include a full block, we are done */ if (len == 0) return; ASSERT(IS_P2ALIGNED(off, blksz)); ASSERT(trunc || IS_P2ALIGNED(len, blksz)); blkid = off >> blkshift; nblks = len >> blkshift; if (trunc) nblks += 1; /* * Dirty all the indirect blocks in this range. Note that only * the first and last indirect blocks can actually be written * (if they were partially freed) -- they must be dirtied, even if * they do not exist on disk yet. The interior blocks will * be freed by free_children(), so they will not actually be written. * Even though these interior blocks will not be written, we * dirty them for two reasons: * * - It ensures that the indirect blocks remain in memory until * syncing context. (They have already been prefetched by * dmu_tx_hold_free(), so we don't have to worry about reading * them serially here.) * * - The dirty space accounting will put pressure on the txg sync * mechanism to begin syncing, and to delay transactions if there * is a large amount of freeing. Even though these indirect * blocks will not be written, we could need to write the same * amount of space if we copy the freed BPs into deadlists. */ if (dn->dn_nlevels > 1) { rw_enter(&dn->dn_struct_rwlock, RW_WRITER); uint64_t first, last; first = blkid >> epbs; dnode_dirty_l1(dn, first, tx); if (trunc) last = dn->dn_maxblkid >> epbs; else last = (blkid + nblks - 1) >> epbs; if (last != first) dnode_dirty_l1(dn, last, tx); dnode_dirty_l1range(dn, first, last, tx); int shift = dn->dn_datablkshift + dn->dn_indblkshift - SPA_BLKPTRSHIFT; for (uint64_t i = first + 1; i < last; i++) { /* * Set i to the blockid of the next non-hole * level-1 indirect block at or after i. Note * that dnode_next_offset() operates in terms of * level-0-equivalent bytes. */ uint64_t ibyte = i << shift; int err = dnode_next_offset(dn, DNODE_FIND_HAVELOCK, &ibyte, 2, 1, 0); i = ibyte >> shift; if (i >= last) break; /* * Normally we should not see an error, either * from dnode_next_offset() or dbuf_hold_level() * (except for ESRCH from dnode_next_offset). * If there is an i/o error, then when we read * this block in syncing context, it will use * ZIO_FLAG_MUSTSUCCEED, and thus hang/panic according * to the "failmode" property. dnode_next_offset() * doesn't have a flag to indicate MUSTSUCCEED. */ if (err != 0) break; dnode_dirty_l1(dn, i, tx); } rw_exit(&dn->dn_struct_rwlock); } done: /* * Add this range to the dnode range list. * We will finish up this free operation in the syncing phase. */ mutex_enter(&dn->dn_mtx); { int txgoff = tx->tx_txg & TXG_MASK; if (dn->dn_free_ranges[txgoff] == NULL) { dn->dn_free_ranges[txgoff] = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); } range_tree_clear(dn->dn_free_ranges[txgoff], blkid, nblks); range_tree_add(dn->dn_free_ranges[txgoff], blkid, nblks); } dprintf_dnode(dn, "blkid=%llu nblks=%llu txg=%llu\n", (u_longlong_t)blkid, (u_longlong_t)nblks, (u_longlong_t)tx->tx_txg); mutex_exit(&dn->dn_mtx); dbuf_free_range(dn, blkid, blkid + nblks - 1, tx); dnode_setdirty(dn, tx); } static boolean_t dnode_spill_freed(dnode_t *dn) { int i; mutex_enter(&dn->dn_mtx); for (i = 0; i < TXG_SIZE; i++) { if (dn->dn_rm_spillblk[i] == DN_KILL_SPILLBLK) break; } mutex_exit(&dn->dn_mtx); return (i < TXG_SIZE); } /* return TRUE if this blkid was freed in a recent txg, or FALSE if it wasn't */ uint64_t dnode_block_freed(dnode_t *dn, uint64_t blkid) { void *dp = spa_get_dsl(dn->dn_objset->os_spa); int i; if (blkid == DMU_BONUS_BLKID) return (FALSE); /* * If we're in the process of opening the pool, dp will not be * set yet, but there shouldn't be anything dirty. */ if (dp == NULL) return (FALSE); if (dn->dn_free_txg) return (TRUE); if (blkid == DMU_SPILL_BLKID) return (dnode_spill_freed(dn)); mutex_enter(&dn->dn_mtx); for (i = 0; i < TXG_SIZE; i++) { if (dn->dn_free_ranges[i] != NULL && range_tree_contains(dn->dn_free_ranges[i], blkid, 1)) break; } mutex_exit(&dn->dn_mtx); return (i < TXG_SIZE); } /* call from syncing context when we actually write/free space for this dnode */ void dnode_diduse_space(dnode_t *dn, int64_t delta) { uint64_t space; dprintf_dnode(dn, "dn=%p dnp=%p used=%llu delta=%lld\n", dn, dn->dn_phys, (u_longlong_t)dn->dn_phys->dn_used, (longlong_t)delta); mutex_enter(&dn->dn_mtx); space = DN_USED_BYTES(dn->dn_phys); if (delta > 0) { ASSERT3U(space + delta, >=, space); /* no overflow */ } else { ASSERT3U(space, >=, -delta); /* no underflow */ } space += delta; if (spa_version(dn->dn_objset->os_spa) < SPA_VERSION_DNODE_BYTES) { ASSERT((dn->dn_phys->dn_flags & DNODE_FLAG_USED_BYTES) == 0); ASSERT0(P2PHASE(space, 1<dn_phys->dn_used = space >> DEV_BSHIFT; } else { dn->dn_phys->dn_used = space; dn->dn_phys->dn_flags |= DNODE_FLAG_USED_BYTES; } mutex_exit(&dn->dn_mtx); } /* * Scans a block at the indicated "level" looking for a hole or data, * depending on 'flags'. * * If level > 0, then we are scanning an indirect block looking at its * pointers. If level == 0, then we are looking at a block of dnodes. * * If we don't find what we are looking for in the block, we return ESRCH. * Otherwise, return with *offset pointing to the beginning (if searching * forwards) or end (if searching backwards) of the range covered by the * block pointer we matched on (or dnode). * * The basic search algorithm used below by dnode_next_offset() is to * use this function to search up the block tree (widen the search) until * we find something (i.e., we don't return ESRCH) and then search back * down the tree (narrow the search) until we reach our original search * level. */ static int dnode_next_offset_level(dnode_t *dn, int flags, uint64_t *offset, int lvl, uint64_t blkfill, uint64_t txg) { dmu_buf_impl_t *db = NULL; void *data = NULL; uint64_t epbs = dn->dn_phys->dn_indblkshift - SPA_BLKPTRSHIFT; uint64_t epb = 1ULL << epbs; uint64_t minfill, maxfill; boolean_t hole; int i, inc, error, span; ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock)); hole = ((flags & DNODE_FIND_HOLE) != 0); inc = (flags & DNODE_FIND_BACKWARDS) ? -1 : 1; ASSERT(txg == 0 || !hole); if (lvl == dn->dn_phys->dn_nlevels) { error = 0; epb = dn->dn_phys->dn_nblkptr; data = dn->dn_phys->dn_blkptr; } else { uint64_t blkid = dbuf_whichblock(dn, lvl, *offset); error = dbuf_hold_impl(dn, lvl, blkid, TRUE, FALSE, FTAG, &db); if (error) { if (error != ENOENT) return (error); if (hole) return (0); /* * This can only happen when we are searching up * the block tree for data. We don't really need to * adjust the offset, as we will just end up looking * at the pointer to this block in its parent, and its * going to be unallocated, so we will skip over it. */ return (SET_ERROR(ESRCH)); } error = dbuf_read(db, NULL, DB_RF_CANFAIL | DB_RF_HAVESTRUCT | DB_RF_NO_DECRYPT | DB_RF_NOPREFETCH); if (error) { dbuf_rele(db, FTAG); return (error); } data = db->db.db_data; rw_enter(&db->db_rwlock, RW_READER); } if (db != NULL && txg != 0 && (db->db_blkptr == NULL || db->db_blkptr->blk_birth <= txg || BP_IS_HOLE(db->db_blkptr))) { /* * This can only happen when we are searching up the tree * and these conditions mean that we need to keep climbing. */ error = SET_ERROR(ESRCH); } else if (lvl == 0) { dnode_phys_t *dnp = data; ASSERT(dn->dn_type == DMU_OT_DNODE); ASSERT(!(flags & DNODE_FIND_BACKWARDS)); for (i = (*offset >> DNODE_SHIFT) & (blkfill - 1); i < blkfill; i += dnp[i].dn_extra_slots + 1) { if ((dnp[i].dn_type == DMU_OT_NONE) == hole) break; } if (i == blkfill) error = SET_ERROR(ESRCH); *offset = (*offset & ~(DNODE_BLOCK_SIZE - 1)) + (i << DNODE_SHIFT); } else { blkptr_t *bp = data; uint64_t start = *offset; span = (lvl - 1) * epbs + dn->dn_datablkshift; minfill = 0; maxfill = blkfill << ((lvl - 1) * epbs); if (hole) maxfill--; else minfill++; if (span >= 8 * sizeof (*offset)) { /* This only happens on the highest indirection level */ ASSERT3U((lvl - 1), ==, dn->dn_phys->dn_nlevels - 1); *offset = 0; } else { *offset = *offset >> span; } for (i = BF64_GET(*offset, 0, epbs); i >= 0 && i < epb; i += inc) { if (BP_GET_FILL(&bp[i]) >= minfill && BP_GET_FILL(&bp[i]) <= maxfill && (hole || bp[i].blk_birth > txg)) break; if (inc > 0 || *offset > 0) *offset += inc; } if (span >= 8 * sizeof (*offset)) { *offset = start; } else { *offset = *offset << span; } if (inc < 0) { /* traversing backwards; position offset at the end */ ASSERT3U(*offset, <=, start); *offset = MIN(*offset + (1ULL << span) - 1, start); } else if (*offset < start) { *offset = start; } if (i < 0 || i >= epb) error = SET_ERROR(ESRCH); } if (db != NULL) { rw_exit(&db->db_rwlock); dbuf_rele(db, FTAG); } return (error); } /* * Find the next hole, data, or sparse region at or after *offset. * The value 'blkfill' tells us how many items we expect to find * in an L0 data block; this value is 1 for normal objects, * DNODES_PER_BLOCK for the meta dnode, and some fraction of * DNODES_PER_BLOCK when searching for sparse regions thereof. * * Examples: * * dnode_next_offset(dn, flags, offset, 1, 1, 0); * Finds the next/previous hole/data in a file. * Used in dmu_offset_next(). * * dnode_next_offset(mdn, flags, offset, 0, DNODES_PER_BLOCK, txg); * Finds the next free/allocated dnode an objset's meta-dnode. * Only finds objects that have new contents since txg (ie. * bonus buffer changes and content removal are ignored). * Used in dmu_object_next(). * * dnode_next_offset(mdn, DNODE_FIND_HOLE, offset, 2, DNODES_PER_BLOCK >> 2, 0); * Finds the next L2 meta-dnode bp that's at most 1/4 full. * Used in dmu_object_alloc(). */ int dnode_next_offset(dnode_t *dn, int flags, uint64_t *offset, int minlvl, uint64_t blkfill, uint64_t txg) { uint64_t initial_offset = *offset; int lvl, maxlvl; int error = 0; if (!(flags & DNODE_FIND_HAVELOCK)) rw_enter(&dn->dn_struct_rwlock, RW_READER); if (dn->dn_phys->dn_nlevels == 0) { error = SET_ERROR(ESRCH); goto out; } if (dn->dn_datablkshift == 0) { if (*offset < dn->dn_datablksz) { if (flags & DNODE_FIND_HOLE) *offset = dn->dn_datablksz; } else { error = SET_ERROR(ESRCH); } goto out; } maxlvl = dn->dn_phys->dn_nlevels; for (lvl = minlvl; lvl <= maxlvl; lvl++) { error = dnode_next_offset_level(dn, flags, offset, lvl, blkfill, txg); if (error != ESRCH) break; } while (error == 0 && --lvl >= minlvl) { error = dnode_next_offset_level(dn, flags, offset, lvl, blkfill, txg); } /* * There's always a "virtual hole" at the end of the object, even * if all BP's which physically exist are non-holes. */ if ((flags & DNODE_FIND_HOLE) && error == ESRCH && txg == 0 && minlvl == 1 && blkfill == 1 && !(flags & DNODE_FIND_BACKWARDS)) { error = 0; } if (error == 0 && (flags & DNODE_FIND_BACKWARDS ? initial_offset < *offset : initial_offset > *offset)) error = SET_ERROR(ESRCH); out: if (!(flags & DNODE_FIND_HAVELOCK)) rw_exit(&dn->dn_struct_rwlock); return (error); } #if defined(_KERNEL) EXPORT_SYMBOL(dnode_hold); EXPORT_SYMBOL(dnode_rele); EXPORT_SYMBOL(dnode_set_nlevels); EXPORT_SYMBOL(dnode_set_blksz); EXPORT_SYMBOL(dnode_free_range); EXPORT_SYMBOL(dnode_evict_dbufs); EXPORT_SYMBOL(dnode_evict_bonus); #endif diff --git a/module/zfs/zfs_vnops.c b/module/zfs/zfs_vnops.c index 8229bc9a93e5..170e392abe93 100644 --- a/module/zfs/zfs_vnops.c +++ b/module/zfs/zfs_vnops.c @@ -1,911 +1,918 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright (c) 2015 by Chunwei Chen. All rights reserved. * Copyright 2017 Nexenta Systems, Inc. */ /* Portions Copyright 2007 Jeremy Teo */ /* Portions Copyright 2010 Robert Milkowski */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static ulong_t zfs_fsync_sync_cnt = 4; int zfs_fsync(znode_t *zp, int syncflag, cred_t *cr) { zfsvfs_t *zfsvfs = ZTOZSB(zp); (void) tsd_set(zfs_fsyncer_key, (void *)zfs_fsync_sync_cnt); if (zfsvfs->z_os->os_sync != ZFS_SYNC_DISABLED) { ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); zil_commit(zfsvfs->z_log, zp->z_id); ZFS_EXIT(zfsvfs); } tsd_set(zfs_fsyncer_key, NULL); return (0); } #if defined(SEEK_HOLE) && defined(SEEK_DATA) /* * Lseek support for finding holes (cmd == SEEK_HOLE) and * data (cmd == SEEK_DATA). "off" is an in/out parameter. */ static int zfs_holey_common(znode_t *zp, ulong_t cmd, loff_t *off) { + zfs_locked_range_t *lr; uint64_t noff = (uint64_t)*off; /* new offset */ uint64_t file_sz; int error; boolean_t hole; file_sz = zp->z_size; if (noff >= file_sz) { return (SET_ERROR(ENXIO)); } if (cmd == F_SEEK_HOLE) hole = B_TRUE; else hole = B_FALSE; + /* Flush any mmap()'d data to disk */ + if (zn_has_cached_data(zp)) + zn_flush_cached_data(zp, B_FALSE); + + lr = zfs_rangelock_enter(&zp->z_rangelock, 0, file_sz, RL_READER); error = dmu_offset_next(ZTOZSB(zp)->z_os, zp->z_id, hole, &noff); + zfs_rangelock_exit(lr); if (error == ESRCH) return (SET_ERROR(ENXIO)); - /* file was dirty, so fall back to using generic logic */ + /* File was dirty, so fall back to using generic logic */ if (error == EBUSY) { if (hole) *off = file_sz; return (0); } /* * We could find a hole that begins after the logical end-of-file, * because dmu_offset_next() only works on whole blocks. If the * EOF falls mid-block, then indicate that the "virtual hole" * at the end of the file begins at the logical EOF, rather than * at the end of the last block. */ if (noff > file_sz) { ASSERT(hole); noff = file_sz; } if (noff < *off) return (error); *off = noff; return (error); } int zfs_holey(znode_t *zp, ulong_t cmd, loff_t *off) { zfsvfs_t *zfsvfs = ZTOZSB(zp); int error; ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); error = zfs_holey_common(zp, cmd, off); ZFS_EXIT(zfsvfs); return (error); } #endif /* SEEK_HOLE && SEEK_DATA */ /*ARGSUSED*/ int zfs_access(znode_t *zp, int mode, int flag, cred_t *cr) { zfsvfs_t *zfsvfs = ZTOZSB(zp); int error; ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); if (flag & V_ACE_MASK) error = zfs_zaccess(zp, mode, flag, B_FALSE, cr); else error = zfs_zaccess_rwx(zp, mode, flag, cr); ZFS_EXIT(zfsvfs); return (error); } static unsigned long zfs_vnops_read_chunk_size = 1024 * 1024; /* Tunable */ /* * Read bytes from specified file into supplied buffer. * * IN: zp - inode of file to be read from. * uio - structure supplying read location, range info, * and return buffer. * ioflag - O_SYNC flags; used to provide FRSYNC semantics. * O_DIRECT flag; used to bypass page cache. * cr - credentials of caller. * * OUT: uio - updated offset and range, buffer filled. * * RETURN: 0 on success, error code on failure. * * Side Effects: * inode - atime updated if byte count > 0 */ /* ARGSUSED */ int zfs_read(struct znode *zp, zfs_uio_t *uio, int ioflag, cred_t *cr) { int error = 0; boolean_t frsync = B_FALSE; zfsvfs_t *zfsvfs = ZTOZSB(zp); ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); if (zp->z_pflags & ZFS_AV_QUARANTINED) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EACCES)); } /* We don't copy out anything useful for directories. */ if (Z_ISDIR(ZTOTYPE(zp))) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EISDIR)); } /* * Validate file offset */ if (zfs_uio_offset(uio) < (offset_t)0) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EINVAL)); } /* * Fasttrack empty reads */ if (zfs_uio_resid(uio) == 0) { ZFS_EXIT(zfsvfs); return (0); } #ifdef FRSYNC /* * If we're in FRSYNC mode, sync out this znode before reading it. * Only do this for non-snapshots. * * Some platforms do not support FRSYNC and instead map it * to O_SYNC, which results in unnecessary calls to zil_commit. We * only honor FRSYNC requests on platforms which support it. */ frsync = !!(ioflag & FRSYNC); #endif if (zfsvfs->z_log && (frsync || zfsvfs->z_os->os_sync == ZFS_SYNC_ALWAYS)) zil_commit(zfsvfs->z_log, zp->z_id); /* * Lock the range against changes. */ zfs_locked_range_t *lr = zfs_rangelock_enter(&zp->z_rangelock, zfs_uio_offset(uio), zfs_uio_resid(uio), RL_READER); /* * If we are reading past end-of-file we can skip * to the end; but we might still need to set atime. */ if (zfs_uio_offset(uio) >= zp->z_size) { error = 0; goto out; } ASSERT(zfs_uio_offset(uio) < zp->z_size); ssize_t n = MIN(zfs_uio_resid(uio), zp->z_size - zfs_uio_offset(uio)); ssize_t start_resid = n; while (n > 0) { ssize_t nbytes = MIN(n, zfs_vnops_read_chunk_size - P2PHASE(zfs_uio_offset(uio), zfs_vnops_read_chunk_size)); #ifdef UIO_NOCOPY if (zfs_uio_segflg(uio) == UIO_NOCOPY) error = mappedread_sf(zp, nbytes, uio); else #endif if (zn_has_cached_data(zp) && !(ioflag & O_DIRECT)) { error = mappedread(zp, nbytes, uio); } else { error = dmu_read_uio_dbuf(sa_get_db(zp->z_sa_hdl), uio, nbytes); } if (error) { /* convert checksum errors into IO errors */ if (error == ECKSUM) error = SET_ERROR(EIO); break; } n -= nbytes; } int64_t nread = start_resid - n; dataset_kstats_update_read_kstats(&zfsvfs->z_kstat, nread); task_io_account_read(nread); out: zfs_rangelock_exit(lr); ZFS_ACCESSTIME_STAMP(zfsvfs, zp); ZFS_EXIT(zfsvfs); return (error); } /* * Write the bytes to a file. * * IN: zp - znode of file to be written to. * uio - structure supplying write location, range info, * and data buffer. * ioflag - O_APPEND flag set if in append mode. * O_DIRECT flag; used to bypass page cache. * cr - credentials of caller. * * OUT: uio - updated offset and range. * * RETURN: 0 if success * error code if failure * * Timestamps: * ip - ctime|mtime updated if byte count > 0 */ /* ARGSUSED */ int zfs_write(znode_t *zp, zfs_uio_t *uio, int ioflag, cred_t *cr) { int error = 0; ssize_t start_resid = zfs_uio_resid(uio); /* * Fasttrack empty write */ ssize_t n = start_resid; if (n == 0) return (0); zfsvfs_t *zfsvfs = ZTOZSB(zp); ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); sa_bulk_attr_t bulk[4]; int count = 0; uint64_t mtime[2], ctime[2]; SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_MTIME(zfsvfs), NULL, &mtime, 16); SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_CTIME(zfsvfs), NULL, &ctime, 16); SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_SIZE(zfsvfs), NULL, &zp->z_size, 8); SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_FLAGS(zfsvfs), NULL, &zp->z_pflags, 8); /* * Callers might not be able to detect properly that we are read-only, * so check it explicitly here. */ if (zfs_is_readonly(zfsvfs)) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EROFS)); } /* * If immutable or not appending then return EPERM. * Intentionally allow ZFS_READONLY through here. * See zfs_zaccess_common() */ if ((zp->z_pflags & ZFS_IMMUTABLE) || ((zp->z_pflags & ZFS_APPENDONLY) && !(ioflag & O_APPEND) && (zfs_uio_offset(uio) < zp->z_size))) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EPERM)); } /* * Validate file offset */ offset_t woff = ioflag & O_APPEND ? zp->z_size : zfs_uio_offset(uio); if (woff < 0) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EINVAL)); } const uint64_t max_blksz = zfsvfs->z_max_blksz; /* * Pre-fault the pages to ensure slow (eg NFS) pages * don't hold up txg. * Skip this if uio contains loaned arc_buf. */ if (zfs_uio_prefaultpages(MIN(n, max_blksz), uio)) { ZFS_EXIT(zfsvfs); return (SET_ERROR(EFAULT)); } /* * If in append mode, set the io offset pointer to eof. */ zfs_locked_range_t *lr; if (ioflag & O_APPEND) { /* * Obtain an appending range lock to guarantee file append * semantics. We reset the write offset once we have the lock. */ lr = zfs_rangelock_enter(&zp->z_rangelock, 0, n, RL_APPEND); woff = lr->lr_offset; if (lr->lr_length == UINT64_MAX) { /* * We overlocked the file because this write will cause * the file block size to increase. * Note that zp_size cannot change with this lock held. */ woff = zp->z_size; } zfs_uio_setoffset(uio, woff); } else { /* * Note that if the file block size will change as a result of * this write, then this range lock will lock the entire file * so that we can re-write the block safely. */ lr = zfs_rangelock_enter(&zp->z_rangelock, woff, n, RL_WRITER); } if (zn_rlimit_fsize(zp, uio)) { zfs_rangelock_exit(lr); ZFS_EXIT(zfsvfs); return (SET_ERROR(EFBIG)); } const rlim64_t limit = MAXOFFSET_T; if (woff >= limit) { zfs_rangelock_exit(lr); ZFS_EXIT(zfsvfs); return (SET_ERROR(EFBIG)); } if (n > limit - woff) n = limit - woff; uint64_t end_size = MAX(zp->z_size, woff + n); zilog_t *zilog = zfsvfs->z_log; const uint64_t uid = KUID_TO_SUID(ZTOUID(zp)); const uint64_t gid = KGID_TO_SGID(ZTOGID(zp)); const uint64_t projid = zp->z_projid; /* * Write the file in reasonable size chunks. Each chunk is written * in a separate transaction; this keeps the intent log records small * and allows us to do more fine-grained space accounting. */ while (n > 0) { woff = zfs_uio_offset(uio); if (zfs_id_overblockquota(zfsvfs, DMU_USERUSED_OBJECT, uid) || zfs_id_overblockquota(zfsvfs, DMU_GROUPUSED_OBJECT, gid) || (projid != ZFS_DEFAULT_PROJID && zfs_id_overblockquota(zfsvfs, DMU_PROJECTUSED_OBJECT, projid))) { error = SET_ERROR(EDQUOT); break; } arc_buf_t *abuf = NULL; if (n >= max_blksz && woff >= zp->z_size && P2PHASE(woff, max_blksz) == 0 && zp->z_blksz == max_blksz) { /* * This write covers a full block. "Borrow" a buffer * from the dmu so that we can fill it before we enter * a transaction. This avoids the possibility of * holding up the transaction if the data copy hangs * up on a pagefault (e.g., from an NFS server mapping). */ size_t cbytes; abuf = dmu_request_arcbuf(sa_get_db(zp->z_sa_hdl), max_blksz); ASSERT(abuf != NULL); ASSERT(arc_buf_size(abuf) == max_blksz); if ((error = zfs_uiocopy(abuf->b_data, max_blksz, UIO_WRITE, uio, &cbytes))) { dmu_return_arcbuf(abuf); break; } ASSERT3S(cbytes, ==, max_blksz); } /* * Start a transaction. */ dmu_tx_t *tx = dmu_tx_create(zfsvfs->z_os); dmu_tx_hold_sa(tx, zp->z_sa_hdl, B_FALSE); dmu_buf_impl_t *db = (dmu_buf_impl_t *)sa_get_db(zp->z_sa_hdl); DB_DNODE_ENTER(db); dmu_tx_hold_write_by_dnode(tx, DB_DNODE(db), woff, MIN(n, max_blksz)); DB_DNODE_EXIT(db); zfs_sa_upgrade_txholds(tx, zp); error = dmu_tx_assign(tx, TXG_WAIT); if (error) { dmu_tx_abort(tx); if (abuf != NULL) dmu_return_arcbuf(abuf); break; } /* * If rangelock_enter() over-locked we grow the blocksize * and then reduce the lock range. This will only happen * on the first iteration since rangelock_reduce() will * shrink down lr_length to the appropriate size. */ if (lr->lr_length == UINT64_MAX) { uint64_t new_blksz; if (zp->z_blksz > max_blksz) { /* * File's blocksize is already larger than the * "recordsize" property. Only let it grow to * the next power of 2. */ ASSERT(!ISP2(zp->z_blksz)); new_blksz = MIN(end_size, 1 << highbit64(zp->z_blksz)); } else { new_blksz = MIN(end_size, max_blksz); } zfs_grow_blocksize(zp, new_blksz, tx); zfs_rangelock_reduce(lr, woff, n); } /* * XXX - should we really limit each write to z_max_blksz? * Perhaps we should use SPA_MAXBLOCKSIZE chunks? */ const ssize_t nbytes = MIN(n, max_blksz - P2PHASE(woff, max_blksz)); ssize_t tx_bytes; if (abuf == NULL) { tx_bytes = zfs_uio_resid(uio); zfs_uio_fault_disable(uio, B_TRUE); error = dmu_write_uio_dbuf(sa_get_db(zp->z_sa_hdl), uio, nbytes, tx); zfs_uio_fault_disable(uio, B_FALSE); #ifdef __linux__ if (error == EFAULT) { dmu_tx_commit(tx); /* * Account for partial writes before * continuing the loop. * Update needs to occur before the next * zfs_uio_prefaultpages, or prefaultpages may * error, and we may break the loop early. */ if (tx_bytes != zfs_uio_resid(uio)) n -= tx_bytes - zfs_uio_resid(uio); if (zfs_uio_prefaultpages(MIN(n, max_blksz), uio)) { break; } continue; } #endif if (error != 0) { dmu_tx_commit(tx); break; } tx_bytes -= zfs_uio_resid(uio); } else { /* Implied by abuf != NULL: */ ASSERT3S(n, >=, max_blksz); ASSERT0(P2PHASE(woff, max_blksz)); /* * We can simplify nbytes to MIN(n, max_blksz) since * P2PHASE(woff, max_blksz) is 0, and knowing * n >= max_blksz lets us simplify further: */ ASSERT3S(nbytes, ==, max_blksz); /* * Thus, we're writing a full block at a block-aligned * offset and extending the file past EOF. * * dmu_assign_arcbuf_by_dbuf() will directly assign the * arc buffer to a dbuf. */ error = dmu_assign_arcbuf_by_dbuf( sa_get_db(zp->z_sa_hdl), woff, abuf, tx); if (error != 0) { dmu_return_arcbuf(abuf); dmu_tx_commit(tx); break; } ASSERT3S(nbytes, <=, zfs_uio_resid(uio)); zfs_uioskip(uio, nbytes); tx_bytes = nbytes; } if (tx_bytes && zn_has_cached_data(zp) && !(ioflag & O_DIRECT)) { update_pages(zp, woff, tx_bytes, zfsvfs->z_os); } /* * If we made no progress, we're done. If we made even * partial progress, update the znode and ZIL accordingly. */ if (tx_bytes == 0) { (void) sa_update(zp->z_sa_hdl, SA_ZPL_SIZE(zfsvfs), (void *)&zp->z_size, sizeof (uint64_t), tx); dmu_tx_commit(tx); ASSERT(error != 0); break; } /* * Clear Set-UID/Set-GID bits on successful write if not * privileged and at least one of the execute bits is set. * * It would be nice to do this after all writes have * been done, but that would still expose the ISUID/ISGID * to another app after the partial write is committed. * * Note: we don't call zfs_fuid_map_id() here because * user 0 is not an ephemeral uid. */ mutex_enter(&zp->z_acl_lock); if ((zp->z_mode & (S_IXUSR | (S_IXUSR >> 3) | (S_IXUSR >> 6))) != 0 && (zp->z_mode & (S_ISUID | S_ISGID)) != 0 && secpolicy_vnode_setid_retain(zp, cr, ((zp->z_mode & S_ISUID) != 0 && uid == 0)) != 0) { uint64_t newmode; zp->z_mode &= ~(S_ISUID | S_ISGID); newmode = zp->z_mode; (void) sa_update(zp->z_sa_hdl, SA_ZPL_MODE(zfsvfs), (void *)&newmode, sizeof (uint64_t), tx); } mutex_exit(&zp->z_acl_lock); zfs_tstamp_update_setup(zp, CONTENT_MODIFIED, mtime, ctime); /* * Update the file size (zp_size) if it has changed; * account for possible concurrent updates. */ while ((end_size = zp->z_size) < zfs_uio_offset(uio)) { (void) atomic_cas_64(&zp->z_size, end_size, zfs_uio_offset(uio)); ASSERT(error == 0); } /* * If we are replaying and eof is non zero then force * the file size to the specified eof. Note, there's no * concurrency during replay. */ if (zfsvfs->z_replay && zfsvfs->z_replay_eof != 0) zp->z_size = zfsvfs->z_replay_eof; error = sa_bulk_update(zp->z_sa_hdl, bulk, count, tx); zfs_log_write(zilog, tx, TX_WRITE, zp, woff, tx_bytes, ioflag, NULL, NULL); dmu_tx_commit(tx); if (error != 0) break; ASSERT3S(tx_bytes, ==, nbytes); n -= nbytes; if (n > 0) { if (zfs_uio_prefaultpages(MIN(n, max_blksz), uio)) { error = SET_ERROR(EFAULT); break; } } } zfs_znode_update_vfs(zp); zfs_rangelock_exit(lr); /* * If we're in replay mode, or we made no progress, or the * uio data is inaccessible return an error. Otherwise, it's * at least a partial write, so it's successful. */ if (zfsvfs->z_replay || zfs_uio_resid(uio) == start_resid || error == EFAULT) { ZFS_EXIT(zfsvfs); return (error); } if (ioflag & (O_SYNC | O_DSYNC) || zfsvfs->z_os->os_sync == ZFS_SYNC_ALWAYS) zil_commit(zilog, zp->z_id); const int64_t nwritten = start_resid - zfs_uio_resid(uio); dataset_kstats_update_write_kstats(&zfsvfs->z_kstat, nwritten); task_io_account_write(nwritten); ZFS_EXIT(zfsvfs); return (0); } /*ARGSUSED*/ int zfs_getsecattr(znode_t *zp, vsecattr_t *vsecp, int flag, cred_t *cr) { zfsvfs_t *zfsvfs = ZTOZSB(zp); int error; boolean_t skipaclchk = (flag & ATTR_NOACLCHECK) ? B_TRUE : B_FALSE; ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); error = zfs_getacl(zp, vsecp, skipaclchk, cr); ZFS_EXIT(zfsvfs); return (error); } /*ARGSUSED*/ int zfs_setsecattr(znode_t *zp, vsecattr_t *vsecp, int flag, cred_t *cr) { zfsvfs_t *zfsvfs = ZTOZSB(zp); int error; boolean_t skipaclchk = (flag & ATTR_NOACLCHECK) ? B_TRUE : B_FALSE; zilog_t *zilog = zfsvfs->z_log; ZFS_ENTER(zfsvfs); ZFS_VERIFY_ZP(zp); error = zfs_setacl(zp, vsecp, skipaclchk, cr); if (zfsvfs->z_os->os_sync == ZFS_SYNC_ALWAYS) zil_commit(zilog, 0); ZFS_EXIT(zfsvfs); return (error); } #ifdef ZFS_DEBUG static int zil_fault_io = 0; #endif static void zfs_get_done(zgd_t *zgd, int error); /* * Get data to generate a TX_WRITE intent log record. */ int zfs_get_data(void *arg, uint64_t gen, lr_write_t *lr, char *buf, struct lwb *lwb, zio_t *zio) { zfsvfs_t *zfsvfs = arg; objset_t *os = zfsvfs->z_os; znode_t *zp; uint64_t object = lr->lr_foid; uint64_t offset = lr->lr_offset; uint64_t size = lr->lr_length; dmu_buf_t *db; zgd_t *zgd; int error = 0; uint64_t zp_gen; ASSERT3P(lwb, !=, NULL); ASSERT3P(zio, !=, NULL); ASSERT3U(size, !=, 0); /* * Nothing to do if the file has been removed */ if (zfs_zget(zfsvfs, object, &zp) != 0) return (SET_ERROR(ENOENT)); if (zp->z_unlinked) { /* * Release the vnode asynchronously as we currently have the * txg stopped from syncing. */ zfs_zrele_async(zp); return (SET_ERROR(ENOENT)); } /* check if generation number matches */ if (sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(zfsvfs), &zp_gen, sizeof (zp_gen)) != 0) { zfs_zrele_async(zp); return (SET_ERROR(EIO)); } if (zp_gen != gen) { zfs_zrele_async(zp); return (SET_ERROR(ENOENT)); } zgd = (zgd_t *)kmem_zalloc(sizeof (zgd_t), KM_SLEEP); zgd->zgd_lwb = lwb; zgd->zgd_private = zp; /* * Write records come in two flavors: immediate and indirect. * For small writes it's cheaper to store the data with the * log record (immediate); for large writes it's cheaper to * sync the data and get a pointer to it (indirect) so that * we don't have to write the data twice. */ if (buf != NULL) { /* immediate write */ zgd->zgd_lr = zfs_rangelock_enter(&zp->z_rangelock, offset, size, RL_READER); /* test for truncation needs to be done while range locked */ if (offset >= zp->z_size) { error = SET_ERROR(ENOENT); } else { error = dmu_read(os, object, offset, size, buf, DMU_READ_NO_PREFETCH); } ASSERT(error == 0 || error == ENOENT); } else { /* indirect write */ /* * Have to lock the whole block to ensure when it's * written out and its checksum is being calculated * that no one can change the data. We need to re-check * blocksize after we get the lock in case it's changed! */ for (;;) { uint64_t blkoff; size = zp->z_blksz; blkoff = ISP2(size) ? P2PHASE(offset, size) : offset; offset -= blkoff; zgd->zgd_lr = zfs_rangelock_enter(&zp->z_rangelock, offset, size, RL_READER); if (zp->z_blksz == size) break; offset += blkoff; zfs_rangelock_exit(zgd->zgd_lr); } /* test for truncation needs to be done while range locked */ if (lr->lr_offset >= zp->z_size) error = SET_ERROR(ENOENT); #ifdef ZFS_DEBUG if (zil_fault_io) { error = SET_ERROR(EIO); zil_fault_io = 0; } #endif if (error == 0) error = dmu_buf_hold(os, object, offset, zgd, &db, DMU_READ_NO_PREFETCH); if (error == 0) { blkptr_t *bp = &lr->lr_blkptr; zgd->zgd_db = db; zgd->zgd_bp = bp; ASSERT(db->db_offset == offset); ASSERT(db->db_size == size); error = dmu_sync(zio, lr->lr_common.lrc_txg, zfs_get_done, zgd); ASSERT(error || lr->lr_length <= size); /* * On success, we need to wait for the write I/O * initiated by dmu_sync() to complete before we can * release this dbuf. We will finish everything up * in the zfs_get_done() callback. */ if (error == 0) return (0); if (error == EALREADY) { lr->lr_common.lrc_txtype = TX_WRITE2; /* * TX_WRITE2 relies on the data previously * written by the TX_WRITE that caused * EALREADY. We zero out the BP because * it is the old, currently-on-disk BP. */ zgd->zgd_bp = NULL; BP_ZERO(bp); error = 0; } } } zfs_get_done(zgd, error); return (error); } /* ARGSUSED */ static void zfs_get_done(zgd_t *zgd, int error) { znode_t *zp = zgd->zgd_private; if (zgd->zgd_db) dmu_buf_rele(zgd->zgd_db, zgd); zfs_rangelock_exit(zgd->zgd_lr); /* * Release the vnode asynchronously as we currently have the * txg stopped from syncing. */ zfs_zrele_async(zp); kmem_free(zgd, sizeof (zgd_t)); } EXPORT_SYMBOL(zfs_access); EXPORT_SYMBOL(zfs_fsync); EXPORT_SYMBOL(zfs_holey); EXPORT_SYMBOL(zfs_read); EXPORT_SYMBOL(zfs_write); EXPORT_SYMBOL(zfs_getsecattr); EXPORT_SYMBOL(zfs_setsecattr); ZFS_MODULE_PARAM(zfs_vnops, zfs_vnops_, read_chunk_size, ULONG, ZMOD_RW, "Bytes to read per chunk"); diff --git a/tests/runfiles/common.run b/tests/runfiles/common.run index a62cd6ad39f5..97ee7b8ae241 100644 --- a/tests/runfiles/common.run +++ b/tests/runfiles/common.run @@ -1,946 +1,946 @@ # # This file and its contents are supplied under the terms of the # Common Development and Distribution License ("CDDL"), version 1.0. # You may only use this file in accordance with the terms of version # 1.0 of the CDDL. # # A full copy of the text of the CDDL should have accompanied this # source. A copy of the CDDL is also available via the Internet at # http://www.illumos.org/license/CDDL. # # This run file contains all of the common functional tests. When # adding a new test consider also adding it to the sanity.run file # if the new test runs to completion in only a few seconds. # # Approximate run time: 4-5 hours # [DEFAULT] pre = setup quiet = False pre_user = root user = root timeout = 600 post_user = root post = cleanup failsafe_user = root failsafe = callbacks/zfs_failsafe outputdir = /var/tmp/test_results tags = ['functional'] [tests/functional/acl/off] tests = ['posixmode'] tags = ['functional', 'acl'] [tests/functional/alloc_class] tests = ['alloc_class_001_pos', 'alloc_class_002_neg', 'alloc_class_003_pos', 'alloc_class_004_pos', 'alloc_class_005_pos', 'alloc_class_006_pos', 'alloc_class_007_pos', 'alloc_class_008_pos', 'alloc_class_009_pos', 'alloc_class_010_pos', 'alloc_class_011_neg', 'alloc_class_012_pos', 'alloc_class_013_pos'] tags = ['functional', 'alloc_class'] [tests/functional/arc] tests = ['dbufstats_001_pos', 'dbufstats_002_pos', 'dbufstats_003_pos', 'arcstats_runtime_tuning'] tags = ['functional', 'arc'] [tests/functional/atime] tests = ['atime_001_pos', 'atime_002_neg', 'root_atime_off', 'root_atime_on'] tags = ['functional', 'atime'] [tests/functional/bootfs] tests = ['bootfs_001_pos', 'bootfs_002_neg', 'bootfs_003_pos', 'bootfs_004_neg', 'bootfs_005_neg', 'bootfs_006_pos', 'bootfs_007_pos', 'bootfs_008_pos'] tags = ['functional', 'bootfs'] [tests/functional/btree] tests = ['btree_positive', 'btree_negative'] tags = ['functional', 'btree'] pre = post = [tests/functional/cache] tests = ['cache_001_pos', 'cache_002_pos', 'cache_003_pos', 'cache_004_neg', 'cache_005_neg', 'cache_006_pos', 'cache_007_neg', 'cache_008_neg', 'cache_009_pos', 'cache_010_pos', 'cache_011_pos', 'cache_012_pos'] tags = ['functional', 'cache'] [tests/functional/cachefile] tests = ['cachefile_001_pos', 'cachefile_002_pos', 'cachefile_003_pos', 'cachefile_004_pos'] tags = ['functional', 'cachefile'] [tests/functional/casenorm] tests = ['case_all_values', 'norm_all_values', 'mixed_create_failure', 'sensitive_none_lookup', 'sensitive_none_delete', 'sensitive_formd_lookup', 'sensitive_formd_delete', 'insensitive_none_lookup', 'insensitive_none_delete', 'insensitive_formd_lookup', 'insensitive_formd_delete', 'mixed_none_lookup', 'mixed_none_lookup_ci', 'mixed_none_delete', 'mixed_formd_lookup', 'mixed_formd_lookup_ci', 'mixed_formd_delete'] tags = ['functional', 'casenorm'] [tests/functional/channel_program/lua_core] tests = ['tst.args_to_lua', 'tst.divide_by_zero', 'tst.exists', 'tst.integer_illegal', 'tst.integer_overflow', 'tst.language_functions_neg', 'tst.language_functions_pos', 'tst.large_prog', 'tst.libraries', 'tst.memory_limit', 'tst.nested_neg', 'tst.nested_pos', 'tst.nvlist_to_lua', 'tst.recursive_neg', 'tst.recursive_pos', 'tst.return_large', 'tst.return_nvlist_neg', 'tst.return_nvlist_pos', 'tst.return_recursive_table', 'tst.stack_gsub', 'tst.timeout'] tags = ['functional', 'channel_program', 'lua_core'] [tests/functional/channel_program/synctask_core] tests = ['tst.destroy_fs', 'tst.destroy_snap', 'tst.get_count_and_limit', 'tst.get_index_props', 'tst.get_mountpoint', 'tst.get_neg', 'tst.get_number_props', 'tst.get_string_props', 'tst.get_type', 'tst.get_userquota', 'tst.get_written', 'tst.inherit', 'tst.list_bookmarks', 'tst.list_children', 'tst.list_clones', 'tst.list_holds', 'tst.list_snapshots', 'tst.list_system_props', 'tst.list_user_props', 'tst.parse_args_neg','tst.promote_conflict', 'tst.promote_multiple', 'tst.promote_simple', 'tst.rollback_mult', 'tst.rollback_one', 'tst.set_props', 'tst.snapshot_destroy', 'tst.snapshot_neg', 'tst.snapshot_recursive', 'tst.snapshot_simple', 'tst.bookmark.create', 'tst.bookmark.copy', 'tst.terminate_by_signal' ] tags = ['functional', 'channel_program', 'synctask_core'] [tests/functional/checksum] tests = ['run_sha2_test', 'run_skein_test', 'filetest_001_pos', 'filetest_002_pos'] tags = ['functional', 'checksum'] [tests/functional/clean_mirror] tests = [ 'clean_mirror_001_pos', 'clean_mirror_002_pos', 'clean_mirror_003_pos', 'clean_mirror_004_pos'] tags = ['functional', 'clean_mirror'] [tests/functional/cli_root/zdb] tests = ['zdb_002_pos', 'zdb_003_pos', 'zdb_004_pos', 'zdb_005_pos', 'zdb_006_pos', 'zdb_args_neg', 'zdb_args_pos', 'zdb_block_size_histogram', 'zdb_checksum', 'zdb_decompress', 'zdb_display_block', 'zdb_object_range_neg', 'zdb_object_range_pos', 'zdb_objset_id', 'zdb_decompress_zstd', 'zdb_recover', 'zdb_recover_2'] pre = post = tags = ['functional', 'cli_root', 'zdb'] [tests/functional/cli_root/zfs] tests = ['zfs_001_neg', 'zfs_002_pos'] tags = ['functional', 'cli_root', 'zfs'] [tests/functional/cli_root/zfs_bookmark] tests = ['zfs_bookmark_cliargs'] tags = ['functional', 'cli_root', 'zfs_bookmark'] [tests/functional/cli_root/zfs_change-key] tests = ['zfs_change-key', 'zfs_change-key_child', 'zfs_change-key_format', 'zfs_change-key_inherit', 'zfs_change-key_load', 'zfs_change-key_location', 'zfs_change-key_pbkdf2iters', 'zfs_change-key_clones'] tags = ['functional', 'cli_root', 'zfs_change-key'] [tests/functional/cli_root/zfs_clone] tests = ['zfs_clone_001_neg', 'zfs_clone_002_pos', 'zfs_clone_003_pos', 'zfs_clone_004_pos', 'zfs_clone_005_pos', 'zfs_clone_006_pos', 'zfs_clone_007_pos', 'zfs_clone_008_neg', 'zfs_clone_009_neg', 'zfs_clone_010_pos', 'zfs_clone_encrypted', 'zfs_clone_deeply_nested'] tags = ['functional', 'cli_root', 'zfs_clone'] [tests/functional/cli_root/zfs_copies] tests = ['zfs_copies_001_pos', 'zfs_copies_002_pos', 'zfs_copies_003_pos', 'zfs_copies_004_neg', 'zfs_copies_005_neg', 'zfs_copies_006_pos'] tags = ['functional', 'cli_root', 'zfs_copies'] [tests/functional/cli_root/zfs_create] tests = ['zfs_create_001_pos', 'zfs_create_002_pos', 'zfs_create_003_pos', 'zfs_create_004_pos', 'zfs_create_005_pos', 'zfs_create_006_pos', 'zfs_create_007_pos', 'zfs_create_008_neg', 'zfs_create_009_neg', 'zfs_create_010_neg', 'zfs_create_011_pos', 'zfs_create_012_pos', 'zfs_create_013_pos', 'zfs_create_014_pos', 'zfs_create_encrypted', 'zfs_create_crypt_combos', 'zfs_create_dryrun', 'zfs_create_nomount', 'zfs_create_verbose'] tags = ['functional', 'cli_root', 'zfs_create'] [tests/functional/cli_root/zfs_destroy] tests = ['zfs_clone_livelist_condense_and_disable', 'zfs_clone_livelist_condense_races', 'zfs_clone_livelist_dedup', 'zfs_destroy_001_pos', 'zfs_destroy_002_pos', 'zfs_destroy_003_pos', 'zfs_destroy_004_pos', 'zfs_destroy_005_neg', 'zfs_destroy_006_neg', 'zfs_destroy_007_neg', 'zfs_destroy_008_pos', 'zfs_destroy_009_pos', 'zfs_destroy_010_pos', 'zfs_destroy_011_pos', 'zfs_destroy_012_pos', 'zfs_destroy_013_neg', 'zfs_destroy_014_pos', 'zfs_destroy_015_pos', 'zfs_destroy_016_pos', 'zfs_destroy_clone_livelist', 'zfs_destroy_dev_removal', 'zfs_destroy_dev_removal_condense'] tags = ['functional', 'cli_root', 'zfs_destroy'] [tests/functional/cli_root/zfs_diff] tests = ['zfs_diff_changes', 'zfs_diff_cliargs', 'zfs_diff_timestamp', 'zfs_diff_types', 'zfs_diff_encrypted'] tags = ['functional', 'cli_root', 'zfs_diff'] [tests/functional/cli_root/zfs_get] tests = ['zfs_get_001_pos', 'zfs_get_002_pos', 'zfs_get_003_pos', 'zfs_get_004_pos', 'zfs_get_005_neg', 'zfs_get_006_neg', 'zfs_get_007_neg', 'zfs_get_008_pos', 'zfs_get_009_pos', 'zfs_get_010_neg'] tags = ['functional', 'cli_root', 'zfs_get'] [tests/functional/cli_root/zfs_ids_to_path] tests = ['zfs_ids_to_path_001_pos'] tags = ['functional', 'cli_root', 'zfs_ids_to_path'] [tests/functional/cli_root/zfs_inherit] tests = ['zfs_inherit_001_neg', 'zfs_inherit_002_neg', 'zfs_inherit_003_pos', 'zfs_inherit_mountpoint'] tags = ['functional', 'cli_root', 'zfs_inherit'] [tests/functional/cli_root/zfs_load-key] tests = ['zfs_load-key', 'zfs_load-key_all', 'zfs_load-key_file', 'zfs_load-key_location', 'zfs_load-key_noop', 'zfs_load-key_recursive'] tags = ['functional', 'cli_root', 'zfs_load-key'] [tests/functional/cli_root/zfs_mount] tests = ['zfs_mount_001_pos', 'zfs_mount_002_pos', 'zfs_mount_003_pos', 'zfs_mount_004_pos', 'zfs_mount_005_pos', 'zfs_mount_007_pos', 'zfs_mount_009_neg', 'zfs_mount_010_neg', 'zfs_mount_011_neg', 'zfs_mount_012_pos', 'zfs_mount_all_001_pos', 'zfs_mount_encrypted', 'zfs_mount_remount', 'zfs_mount_all_fail', 'zfs_mount_all_mountpoints', 'zfs_mount_test_race'] tags = ['functional', 'cli_root', 'zfs_mount'] [tests/functional/cli_root/zfs_program] tests = ['zfs_program_json'] tags = ['functional', 'cli_root', 'zfs_program'] [tests/functional/cli_root/zfs_promote] tests = ['zfs_promote_001_pos', 'zfs_promote_002_pos', 'zfs_promote_003_pos', 'zfs_promote_004_pos', 'zfs_promote_005_pos', 'zfs_promote_006_neg', 'zfs_promote_007_neg', 'zfs_promote_008_pos', 'zfs_promote_encryptionroot'] tags = ['functional', 'cli_root', 'zfs_promote'] [tests/functional/cli_root/zfs_property] tests = ['zfs_written_property_001_pos'] tags = ['functional', 'cli_root', 'zfs_property'] [tests/functional/cli_root/zfs_receive] tests = ['zfs_receive_001_pos', 'zfs_receive_002_pos', 'zfs_receive_003_pos', 'zfs_receive_004_neg', 'zfs_receive_005_neg', 'zfs_receive_006_pos', 'zfs_receive_007_neg', 'zfs_receive_008_pos', 'zfs_receive_009_neg', 'zfs_receive_010_pos', 'zfs_receive_011_pos', 'zfs_receive_012_pos', 'zfs_receive_013_pos', 'zfs_receive_014_pos', 'zfs_receive_015_pos', 'zfs_receive_016_pos', 'receive-o-x_props_override', 'zfs_receive_from_encrypted', 'zfs_receive_to_encrypted', 'zfs_receive_raw', 'zfs_receive_raw_incremental', 'zfs_receive_-e', 'zfs_receive_raw_-d', 'zfs_receive_from_zstd', 'zfs_receive_new_props'] tags = ['functional', 'cli_root', 'zfs_receive'] [tests/functional/cli_root/zfs_rename] tests = ['zfs_rename_001_pos', 'zfs_rename_002_pos', 'zfs_rename_003_pos', 'zfs_rename_004_neg', 'zfs_rename_005_neg', 'zfs_rename_006_pos', 'zfs_rename_007_pos', 'zfs_rename_008_pos', 'zfs_rename_009_neg', 'zfs_rename_010_neg', 'zfs_rename_011_pos', 'zfs_rename_012_neg', 'zfs_rename_013_pos', 'zfs_rename_014_neg', 'zfs_rename_encrypted_child', 'zfs_rename_to_encrypted', 'zfs_rename_mountpoint', 'zfs_rename_nounmount'] tags = ['functional', 'cli_root', 'zfs_rename'] [tests/functional/cli_root/zfs_reservation] tests = ['zfs_reservation_001_pos', 'zfs_reservation_002_pos'] tags = ['functional', 'cli_root', 'zfs_reservation'] [tests/functional/cli_root/zfs_rollback] tests = ['zfs_rollback_001_pos', 'zfs_rollback_002_pos', 'zfs_rollback_003_neg', 'zfs_rollback_004_neg'] tags = ['functional', 'cli_root', 'zfs_rollback'] [tests/functional/cli_root/zfs_send] tests = ['zfs_send_001_pos', 'zfs_send_002_pos', 'zfs_send_003_pos', 'zfs_send_004_neg', 'zfs_send_005_pos', 'zfs_send_006_pos', 'zfs_send_007_pos', 'zfs_send_encrypted', 'zfs_send_raw', 'zfs_send_sparse', 'zfs_send-b', 'zfs_send_skip_missing'] tags = ['functional', 'cli_root', 'zfs_send'] [tests/functional/cli_root/zfs_set] tests = ['cache_001_pos', 'cache_002_neg', 'canmount_001_pos', 'canmount_002_pos', 'canmount_003_pos', 'canmount_004_pos', 'checksum_001_pos', 'compression_001_pos', 'mountpoint_001_pos', 'mountpoint_002_pos', 'reservation_001_neg', 'user_property_002_pos', 'share_mount_001_neg', 'snapdir_001_pos', 'onoffs_001_pos', 'user_property_001_pos', 'user_property_003_neg', 'readonly_001_pos', 'user_property_004_pos', 'version_001_neg', 'zfs_set_001_neg', 'zfs_set_002_neg', 'zfs_set_003_neg', 'property_alias_001_pos', 'mountpoint_003_pos', 'ro_props_001_pos', 'zfs_set_keylocation', 'zfs_set_feature_activation'] tags = ['functional', 'cli_root', 'zfs_set'] [tests/functional/cli_root/zfs_share] tests = ['zfs_share_001_pos', 'zfs_share_002_pos', 'zfs_share_003_pos', 'zfs_share_004_pos', 'zfs_share_006_pos', 'zfs_share_008_neg', 'zfs_share_010_neg', 'zfs_share_011_pos', 'zfs_share_concurrent_shares'] tags = ['functional', 'cli_root', 'zfs_share'] [tests/functional/cli_root/zfs_snapshot] tests = ['zfs_snapshot_001_neg', 'zfs_snapshot_002_neg', 'zfs_snapshot_003_neg', 'zfs_snapshot_004_neg', 'zfs_snapshot_005_neg', 'zfs_snapshot_006_pos', 'zfs_snapshot_007_neg', 'zfs_snapshot_008_neg', 'zfs_snapshot_009_pos'] tags = ['functional', 'cli_root', 'zfs_snapshot'] [tests/functional/cli_root/zfs_unload-key] tests = ['zfs_unload-key', 'zfs_unload-key_all', 'zfs_unload-key_recursive'] tags = ['functional', 'cli_root', 'zfs_unload-key'] [tests/functional/cli_root/zfs_unmount] tests = ['zfs_unmount_001_pos', 'zfs_unmount_002_pos', 'zfs_unmount_003_pos', 'zfs_unmount_004_pos', 'zfs_unmount_005_pos', 'zfs_unmount_006_pos', 'zfs_unmount_007_neg', 'zfs_unmount_008_neg', 'zfs_unmount_009_pos', 'zfs_unmount_all_001_pos', 'zfs_unmount_nested', 'zfs_unmount_unload_keys'] tags = ['functional', 'cli_root', 'zfs_unmount'] [tests/functional/cli_root/zfs_unshare] tests = ['zfs_unshare_001_pos', 'zfs_unshare_002_pos', 'zfs_unshare_003_pos', 'zfs_unshare_004_neg', 'zfs_unshare_005_neg', 'zfs_unshare_006_pos', 'zfs_unshare_007_pos'] tags = ['functional', 'cli_root', 'zfs_unshare'] [tests/functional/cli_root/zfs_upgrade] tests = ['zfs_upgrade_001_pos', 'zfs_upgrade_002_pos', 'zfs_upgrade_003_pos', 'zfs_upgrade_004_pos', 'zfs_upgrade_005_pos', 'zfs_upgrade_006_neg', 'zfs_upgrade_007_neg'] tags = ['functional', 'cli_root', 'zfs_upgrade'] [tests/functional/cli_root/zfs_wait] tests = ['zfs_wait_deleteq'] tags = ['functional', 'cli_root', 'zfs_wait'] [tests/functional/cli_root/zpool] tests = ['zpool_001_neg', 'zpool_002_pos', 'zpool_003_pos', 'zpool_colors'] tags = ['functional', 'cli_root', 'zpool'] [tests/functional/cli_root/zpool_add] tests = ['zpool_add_001_pos', 'zpool_add_002_pos', 'zpool_add_003_pos', 'zpool_add_004_pos', 'zpool_add_006_pos', 'zpool_add_007_neg', 'zpool_add_008_neg', 'zpool_add_009_neg', 'zpool_add_010_pos', 'add-o_ashift', 'add_prop_ashift', 'zpool_add_dryrun_output'] tags = ['functional', 'cli_root', 'zpool_add'] [tests/functional/cli_root/zpool_attach] tests = ['zpool_attach_001_neg', 'attach-o_ashift'] tags = ['functional', 'cli_root', 'zpool_attach'] [tests/functional/cli_root/zpool_clear] tests = ['zpool_clear_001_pos', 'zpool_clear_002_neg', 'zpool_clear_003_neg', 'zpool_clear_readonly'] tags = ['functional', 'cli_root', 'zpool_clear'] [tests/functional/cli_root/zpool_create] tests = ['zpool_create_001_pos', 'zpool_create_002_pos', 'zpool_create_003_pos', 'zpool_create_004_pos', 'zpool_create_005_pos', 'zpool_create_006_pos', 'zpool_create_007_neg', 'zpool_create_008_pos', 'zpool_create_009_neg', 'zpool_create_010_neg', 'zpool_create_011_neg', 'zpool_create_012_neg', 'zpool_create_014_neg', 'zpool_create_015_neg', 'zpool_create_017_neg', 'zpool_create_018_pos', 'zpool_create_019_pos', 'zpool_create_020_pos', 'zpool_create_021_pos', 'zpool_create_022_pos', 'zpool_create_023_neg', 'zpool_create_024_pos', 'zpool_create_encrypted', 'zpool_create_crypt_combos', 'zpool_create_draid_001_pos', 'zpool_create_draid_002_pos', 'zpool_create_draid_003_pos', 'zpool_create_draid_004_pos', 'zpool_create_features_001_pos', 'zpool_create_features_002_pos', 'zpool_create_features_003_pos', 'zpool_create_features_004_neg', 'zpool_create_features_005_pos', 'zpool_create_features_006_pos', 'zpool_create_features_007_pos', 'zpool_create_features_008_pos', 'zpool_create_features_009_pos', 'create-o_ashift', 'zpool_create_tempname', 'zpool_create_dryrun_output'] tags = ['functional', 'cli_root', 'zpool_create'] [tests/functional/cli_root/zpool_destroy] tests = ['zpool_destroy_001_pos', 'zpool_destroy_002_pos', 'zpool_destroy_003_neg'] pre = post = tags = ['functional', 'cli_root', 'zpool_destroy'] [tests/functional/cli_root/zpool_detach] tests = ['zpool_detach_001_neg'] tags = ['functional', 'cli_root', 'zpool_detach'] [tests/functional/cli_root/zpool_events] tests = ['zpool_events_clear', 'zpool_events_cliargs', 'zpool_events_follow', 'zpool_events_poolname', 'zpool_events_errors', 'zpool_events_duplicates', 'zpool_events_clear_retained'] tags = ['functional', 'cli_root', 'zpool_events'] [tests/functional/cli_root/zpool_export] tests = ['zpool_export_001_pos', 'zpool_export_002_pos', 'zpool_export_003_neg', 'zpool_export_004_pos'] tags = ['functional', 'cli_root', 'zpool_export'] [tests/functional/cli_root/zpool_get] tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos', 'zpool_get_004_neg', 'zpool_get_005_pos'] tags = ['functional', 'cli_root', 'zpool_get'] [tests/functional/cli_root/zpool_history] tests = ['zpool_history_001_neg', 'zpool_history_002_pos'] tags = ['functional', 'cli_root', 'zpool_history'] [tests/functional/cli_root/zpool_import] tests = ['zpool_import_001_pos', 'zpool_import_002_pos', 'zpool_import_003_pos', 'zpool_import_004_pos', 'zpool_import_005_pos', 'zpool_import_006_pos', 'zpool_import_007_pos', 'zpool_import_008_pos', 'zpool_import_009_neg', 'zpool_import_010_pos', 'zpool_import_011_neg', 'zpool_import_012_pos', 'zpool_import_013_neg', 'zpool_import_014_pos', 'zpool_import_015_pos', 'zpool_import_016_pos', 'zpool_import_017_pos', 'zpool_import_features_001_pos', 'zpool_import_features_002_neg', 'zpool_import_features_003_pos', 'zpool_import_missing_001_pos', 'zpool_import_missing_002_pos', 'zpool_import_missing_003_pos', 'zpool_import_rename_001_pos', 'zpool_import_all_001_pos', 'zpool_import_encrypted', 'zpool_import_encrypted_load', 'zpool_import_errata3', 'zpool_import_errata4', 'import_cachefile_device_added', 'import_cachefile_device_removed', 'import_cachefile_device_replaced', 'import_cachefile_mirror_attached', 'import_cachefile_mirror_detached', 'import_cachefile_paths_changed', 'import_cachefile_shared_device', 'import_devices_missing', 'import_paths_changed', 'import_rewind_config_changed', 'import_rewind_device_replaced'] tags = ['functional', 'cli_root', 'zpool_import'] timeout = 1200 [tests/functional/cli_root/zpool_labelclear] tests = ['zpool_labelclear_active', 'zpool_labelclear_exported', 'zpool_labelclear_removed', 'zpool_labelclear_valid'] pre = post = tags = ['functional', 'cli_root', 'zpool_labelclear'] [tests/functional/cli_root/zpool_initialize] tests = ['zpool_initialize_attach_detach_add_remove', 'zpool_initialize_fault_export_import_online', 'zpool_initialize_import_export', 'zpool_initialize_offline_export_import_online', 'zpool_initialize_online_offline', 'zpool_initialize_split', 'zpool_initialize_start_and_cancel_neg', 'zpool_initialize_start_and_cancel_pos', 'zpool_initialize_suspend_resume', 'zpool_initialize_unsupported_vdevs', 'zpool_initialize_verify_checksums', 'zpool_initialize_verify_initialized'] pre = tags = ['functional', 'cli_root', 'zpool_initialize'] [tests/functional/cli_root/zpool_offline] tests = ['zpool_offline_001_pos', 'zpool_offline_002_neg', 'zpool_offline_003_pos'] tags = ['functional', 'cli_root', 'zpool_offline'] [tests/functional/cli_root/zpool_online] tests = ['zpool_online_001_pos', 'zpool_online_002_neg'] tags = ['functional', 'cli_root', 'zpool_online'] [tests/functional/cli_root/zpool_remove] tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos', 'zpool_remove_003_pos'] tags = ['functional', 'cli_root', 'zpool_remove'] [tests/functional/cli_root/zpool_replace] tests = ['zpool_replace_001_neg', 'replace-o_ashift', 'replace_prop_ashift'] tags = ['functional', 'cli_root', 'zpool_replace'] [tests/functional/cli_root/zpool_resilver] tests = ['zpool_resilver_bad_args', 'zpool_resilver_restart'] tags = ['functional', 'cli_root', 'zpool_resilver'] [tests/functional/cli_root/zpool_scrub] tests = ['zpool_scrub_001_neg', 'zpool_scrub_002_pos', 'zpool_scrub_003_pos', 'zpool_scrub_004_pos', 'zpool_scrub_005_pos', 'zpool_scrub_encrypted_unloaded', 'zpool_scrub_print_repairing', 'zpool_scrub_offline_device', 'zpool_scrub_multiple_copies'] tags = ['functional', 'cli_root', 'zpool_scrub'] [tests/functional/cli_root/zpool_set] tests = ['zpool_set_001_pos', 'zpool_set_002_neg', 'zpool_set_003_neg', 'zpool_set_ashift', 'zpool_set_features'] tags = ['functional', 'cli_root', 'zpool_set'] [tests/functional/cli_root/zpool_split] tests = ['zpool_split_cliargs', 'zpool_split_devices', 'zpool_split_encryption', 'zpool_split_props', 'zpool_split_vdevs', 'zpool_split_resilver', 'zpool_split_indirect', 'zpool_split_dryrun_output'] tags = ['functional', 'cli_root', 'zpool_split'] [tests/functional/cli_root/zpool_status] tests = ['zpool_status_001_pos', 'zpool_status_002_pos', 'zpool_status_features_001_pos'] tags = ['functional', 'cli_root', 'zpool_status'] [tests/functional/cli_root/zpool_sync] tests = ['zpool_sync_001_pos', 'zpool_sync_002_neg'] tags = ['functional', 'cli_root', 'zpool_sync'] [tests/functional/cli_root/zpool_trim] tests = ['zpool_trim_attach_detach_add_remove', 'zpool_trim_fault_export_import_online', 'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg', 'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline', 'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg', 'zpool_trim_secure', 'zpool_trim_split', 'zpool_trim_start_and_cancel_neg', 'zpool_trim_start_and_cancel_pos', 'zpool_trim_suspend_resume', 'zpool_trim_unsupported_vdevs', 'zpool_trim_verify_checksums', 'zpool_trim_verify_trimmed'] tags = ['functional', 'zpool_trim'] [tests/functional/cli_root/zpool_upgrade] tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_002_pos', 'zpool_upgrade_003_pos', 'zpool_upgrade_004_pos', 'zpool_upgrade_005_neg', 'zpool_upgrade_006_neg', 'zpool_upgrade_007_pos', 'zpool_upgrade_008_pos', 'zpool_upgrade_009_neg', 'zpool_upgrade_features_001_pos'] tags = ['functional', 'cli_root', 'zpool_upgrade'] [tests/functional/cli_root/zpool_wait] tests = ['zpool_wait_discard', 'zpool_wait_freeing', 'zpool_wait_initialize_basic', 'zpool_wait_initialize_cancel', 'zpool_wait_initialize_flag', 'zpool_wait_multiple', 'zpool_wait_no_activity', 'zpool_wait_remove', 'zpool_wait_remove_cancel', 'zpool_wait_trim_basic', 'zpool_wait_trim_cancel', 'zpool_wait_trim_flag', 'zpool_wait_usage'] tags = ['functional', 'cli_root', 'zpool_wait'] [tests/functional/cli_root/zpool_wait/scan] tests = ['zpool_wait_replace_cancel', 'zpool_wait_rebuild', 'zpool_wait_resilver', 'zpool_wait_scrub_cancel', 'zpool_wait_replace', 'zpool_wait_scrub_basic', 'zpool_wait_scrub_flag'] tags = ['functional', 'cli_root', 'zpool_wait'] [tests/functional/cli_user/misc] tests = ['zdb_001_neg', 'zfs_001_neg', 'zfs_allow_001_neg', 'zfs_clone_001_neg', 'zfs_create_001_neg', 'zfs_destroy_001_neg', 'zfs_get_001_neg', 'zfs_inherit_001_neg', 'zfs_mount_001_neg', 'zfs_promote_001_neg', 'zfs_receive_001_neg', 'zfs_rename_001_neg', 'zfs_rollback_001_neg', 'zfs_send_001_neg', 'zfs_set_001_neg', 'zfs_share_001_neg', 'zfs_snapshot_001_neg', 'zfs_unallow_001_neg', 'zfs_unmount_001_neg', 'zfs_unshare_001_neg', 'zfs_upgrade_001_neg', 'zpool_001_neg', 'zpool_add_001_neg', 'zpool_attach_001_neg', 'zpool_clear_001_neg', 'zpool_create_001_neg', 'zpool_destroy_001_neg', 'zpool_detach_001_neg', 'zpool_export_001_neg', 'zpool_get_001_neg', 'zpool_history_001_neg', 'zpool_import_001_neg', 'zpool_import_002_neg', 'zpool_offline_001_neg', 'zpool_online_001_neg', 'zpool_remove_001_neg', 'zpool_replace_001_neg', 'zpool_scrub_001_neg', 'zpool_set_001_neg', 'zpool_status_001_neg', 'zpool_upgrade_001_neg', 'arcstat_001_pos', 'arc_summary_001_pos', 'arc_summary_002_neg', 'zpool_wait_privilege'] user = tags = ['functional', 'cli_user', 'misc'] [tests/functional/cli_user/zfs_list] tests = ['zfs_list_001_pos', 'zfs_list_002_pos', 'zfs_list_003_pos', 'zfs_list_004_neg', 'zfs_list_007_pos', 'zfs_list_008_neg'] user = tags = ['functional', 'cli_user', 'zfs_list'] [tests/functional/cli_user/zpool_iostat] tests = ['zpool_iostat_001_neg', 'zpool_iostat_002_pos', 'zpool_iostat_003_neg', 'zpool_iostat_004_pos', 'zpool_iostat_005_pos', 'zpool_iostat_-c_disable', 'zpool_iostat_-c_homedir', 'zpool_iostat_-c_searchpath'] user = tags = ['functional', 'cli_user', 'zpool_iostat'] [tests/functional/cli_user/zpool_list] tests = ['zpool_list_001_pos', 'zpool_list_002_neg'] user = tags = ['functional', 'cli_user', 'zpool_list'] [tests/functional/cli_user/zpool_status] tests = ['zpool_status_003_pos', 'zpool_status_-c_disable', 'zpool_status_-c_homedir', 'zpool_status_-c_searchpath'] user = tags = ['functional', 'cli_user', 'zpool_status'] [tests/functional/compression] tests = ['compress_001_pos', 'compress_002_pos', 'compress_003_pos', 'l2arc_compressed_arc', 'l2arc_compressed_arc_disabled', 'l2arc_encrypted', 'l2arc_encrypted_no_compressed_arc'] tags = ['functional', 'compression'] [tests/functional/cp_files] tests = ['cp_files_001_pos'] tags = ['functional', 'cp_files'] [tests/functional/crtime] tests = ['crtime_001_pos' ] tags = ['functional', 'crtime'] [tests/functional/ctime] tests = ['ctime_001_pos' ] tags = ['functional', 'ctime'] [tests/functional/deadman] tests = ['deadman_ratelimit', 'deadman_sync', 'deadman_zio'] pre = post = tags = ['functional', 'deadman'] [tests/functional/delegate] tests = ['zfs_allow_001_pos', 'zfs_allow_002_pos', 'zfs_allow_003_pos', 'zfs_allow_004_pos', 'zfs_allow_005_pos', 'zfs_allow_006_pos', 'zfs_allow_007_pos', 'zfs_allow_008_pos', 'zfs_allow_009_neg', 'zfs_allow_010_pos', 'zfs_allow_011_neg', 'zfs_allow_012_neg', 'zfs_unallow_001_pos', 'zfs_unallow_002_pos', 'zfs_unallow_003_pos', 'zfs_unallow_004_pos', 'zfs_unallow_005_pos', 'zfs_unallow_006_pos', 'zfs_unallow_007_neg', 'zfs_unallow_008_neg'] tags = ['functional', 'delegate'] [tests/functional/exec] tests = ['exec_001_pos', 'exec_002_neg'] tags = ['functional', 'exec'] [tests/functional/features/async_destroy] tests = ['async_destroy_001_pos'] tags = ['functional', 'features', 'async_destroy'] [tests/functional/features/large_dnode] tests = ['large_dnode_001_pos', 'large_dnode_003_pos', 'large_dnode_004_neg', 'large_dnode_005_pos', 'large_dnode_007_neg', 'large_dnode_009_pos'] tags = ['functional', 'features', 'large_dnode'] [tests/functional/grow] pre = post = tests = ['grow_pool_001_pos', 'grow_replicas_001_pos'] tags = ['functional', 'grow'] [tests/functional/history] tests = ['history_001_pos', 'history_002_pos', 'history_003_pos', 'history_004_pos', 'history_005_neg', 'history_006_neg', 'history_007_pos', 'history_008_pos', 'history_009_pos', 'history_010_pos'] tags = ['functional', 'history'] [tests/functional/hkdf] tests = ['run_hkdf_test'] tags = ['functional', 'hkdf'] [tests/functional/inheritance] tests = ['inherit_001_pos'] pre = tags = ['functional', 'inheritance'] [tests/functional/io] tests = ['sync', 'psync', 'posixaio', 'mmap'] tags = ['functional', 'io'] [tests/functional/inuse] tests = ['inuse_004_pos', 'inuse_005_pos', 'inuse_008_pos', 'inuse_009_pos'] post = tags = ['functional', 'inuse'] [tests/functional/large_files] tests = ['large_files_001_pos', 'large_files_002_pos'] tags = ['functional', 'large_files'] [tests/functional/largest_pool] tests = ['largest_pool_001_pos'] pre = post = tags = ['functional', 'largest_pool'] [tests/functional/limits] tests = ['filesystem_count', 'filesystem_limit', 'snapshot_count', 'snapshot_limit'] tags = ['functional', 'limits'] [tests/functional/link_count] tests = ['link_count_001', 'link_count_root_inode'] tags = ['functional', 'link_count'] [tests/functional/migration] tests = ['migration_001_pos', 'migration_002_pos', 'migration_003_pos', 'migration_004_pos', 'migration_005_pos', 'migration_006_pos', 'migration_007_pos', 'migration_008_pos', 'migration_009_pos', 'migration_010_pos', 'migration_011_pos', 'migration_012_pos'] tags = ['functional', 'migration'] [tests/functional/mmap] -tests = ['mmap_write_001_pos', 'mmap_read_001_pos'] +tests = ['mmap_write_001_pos', 'mmap_read_001_pos', 'mmap_seek_001_pos'] tags = ['functional', 'mmap'] [tests/functional/mount] tests = ['umount_001', 'umountall_001'] tags = ['functional', 'mount'] [tests/functional/mv_files] tests = ['mv_files_001_pos', 'mv_files_002_pos', 'random_creation'] tags = ['functional', 'mv_files'] [tests/functional/nestedfs] tests = ['nestedfs_001_pos'] tags = ['functional', 'nestedfs'] [tests/functional/no_space] tests = ['enospc_001_pos', 'enospc_002_pos', 'enospc_003_pos', 'enospc_df'] tags = ['functional', 'no_space'] [tests/functional/nopwrite] tests = ['nopwrite_copies', 'nopwrite_mtime', 'nopwrite_negative', 'nopwrite_promoted_clone', 'nopwrite_recsize', 'nopwrite_sync', 'nopwrite_varying_compression', 'nopwrite_volume'] tags = ['functional', 'nopwrite'] [tests/functional/online_offline] tests = ['online_offline_001_pos', 'online_offline_002_neg', 'online_offline_003_neg'] tags = ['functional', 'online_offline'] [tests/functional/pool_checkpoint] tests = ['checkpoint_after_rewind', 'checkpoint_big_rewind', 'checkpoint_capacity', 'checkpoint_conf_change', 'checkpoint_discard', 'checkpoint_discard_busy', 'checkpoint_discard_many', 'checkpoint_indirect', 'checkpoint_invalid', 'checkpoint_lun_expsz', 'checkpoint_open', 'checkpoint_removal', 'checkpoint_rewind', 'checkpoint_ro_rewind', 'checkpoint_sm_scale', 'checkpoint_twice', 'checkpoint_vdev_add', 'checkpoint_zdb', 'checkpoint_zhack_feat'] tags = ['functional', 'pool_checkpoint'] timeout = 1800 [tests/functional/pool_names] tests = ['pool_names_001_pos', 'pool_names_002_neg'] pre = post = tags = ['functional', 'pool_names'] [tests/functional/poolversion] tests = ['poolversion_001_pos', 'poolversion_002_pos'] tags = ['functional', 'poolversion'] [tests/functional/pyzfs] tests = ['pyzfs_unittest'] pre = post = tags = ['functional', 'pyzfs'] [tests/functional/quota] tests = ['quota_001_pos', 'quota_002_pos', 'quota_003_pos', 'quota_004_pos', 'quota_005_pos', 'quota_006_neg'] tags = ['functional', 'quota'] [tests/functional/redacted_send] tests = ['redacted_compressed', 'redacted_contents', 'redacted_deleted', 'redacted_disabled_feature', 'redacted_embedded', 'redacted_holes', 'redacted_incrementals', 'redacted_largeblocks', 'redacted_many_clones', 'redacted_mixed_recsize', 'redacted_mounts', 'redacted_negative', 'redacted_origin', 'redacted_panic', 'redacted_props', 'redacted_resume', 'redacted_size', 'redacted_volume'] tags = ['functional', 'redacted_send'] [tests/functional/raidz] tests = ['raidz_001_neg', 'raidz_002_pos', 'raidz_003_pos', 'raidz_004_pos'] tags = ['functional', 'raidz'] [tests/functional/redundancy] tests = ['redundancy_draid', 'redundancy_draid1', 'redundancy_draid2', 'redundancy_draid3', 'redundancy_draid_damaged', 'redundancy_draid_spare1', 'redundancy_draid_spare2', 'redundancy_draid_spare3', 'redundancy_mirror', 'redundancy_raidz', 'redundancy_raidz1', 'redundancy_raidz2', 'redundancy_raidz3', 'redundancy_stripe'] tags = ['functional', 'redundancy'] timeout = 1200 [tests/functional/refquota] tests = ['refquota_001_pos', 'refquota_002_pos', 'refquota_003_pos', 'refquota_004_pos', 'refquota_005_pos', 'refquota_006_neg', 'refquota_007_neg', 'refquota_008_neg'] tags = ['functional', 'refquota'] [tests/functional/refreserv] tests = ['refreserv_001_pos', 'refreserv_002_pos', 'refreserv_003_pos', 'refreserv_004_pos', 'refreserv_005_pos', 'refreserv_multi_raidz', 'refreserv_raidz'] tags = ['functional', 'refreserv'] [tests/functional/removal] pre = tests = ['removal_all_vdev', 'removal_cancel', 'removal_check_space', 'removal_condense_export', 'removal_multiple_indirection', 'removal_nopwrite', 'removal_remap_deadlists', 'removal_resume_export', 'removal_sanity', 'removal_with_add', 'removal_with_create_fs', 'removal_with_dedup', 'removal_with_errors', 'removal_with_export', 'removal_with_ganging', 'removal_with_faulted', 'removal_with_remove', 'removal_with_scrub', 'removal_with_send', 'removal_with_send_recv', 'removal_with_snapshot', 'removal_with_write', 'removal_with_zdb', 'remove_expanded', 'remove_mirror', 'remove_mirror_sanity', 'remove_raidz', 'remove_indirect', 'remove_attach_mirror'] tags = ['functional', 'removal'] [tests/functional/rename_dirs] tests = ['rename_dirs_001_pos'] tags = ['functional', 'rename_dirs'] [tests/functional/replacement] tests = ['attach_import', 'attach_multiple', 'attach_rebuild', 'attach_resilver', 'detach', 'rebuild_disabled_feature', 'rebuild_multiple', 'rebuild_raidz', 'replace_import', 'replace_rebuild', 'replace_resilver', 'resilver_restart_001', 'resilver_restart_002', 'scrub_cancel'] tags = ['functional', 'replacement'] [tests/functional/reservation] tests = ['reservation_001_pos', 'reservation_002_pos', 'reservation_003_pos', 'reservation_004_pos', 'reservation_005_pos', 'reservation_006_pos', 'reservation_007_pos', 'reservation_008_pos', 'reservation_009_pos', 'reservation_010_pos', 'reservation_011_pos', 'reservation_012_pos', 'reservation_013_pos', 'reservation_014_pos', 'reservation_015_pos', 'reservation_016_pos', 'reservation_017_pos', 'reservation_018_pos', 'reservation_019_pos', 'reservation_020_pos', 'reservation_021_neg', 'reservation_022_pos'] tags = ['functional', 'reservation'] [tests/functional/rootpool] tests = ['rootpool_002_neg', 'rootpool_003_neg', 'rootpool_007_pos'] tags = ['functional', 'rootpool'] [tests/functional/rsend] tests = ['recv_dedup', 'recv_dedup_encrypted_zvol', 'rsend_001_pos', 'rsend_002_pos', 'rsend_003_pos', 'rsend_004_pos', 'rsend_005_pos', 'rsend_006_pos', 'rsend_007_pos', 'rsend_008_pos', 'rsend_009_pos', 'rsend_010_pos', 'rsend_011_pos', 'rsend_012_pos', 'rsend_013_pos', 'rsend_014_pos', 'rsend_016_neg', 'rsend_019_pos', 'rsend_020_pos', 'rsend_021_pos', 'rsend_022_pos', 'rsend_024_pos', 'send-c_verify_ratio', 'send-c_verify_contents', 'send-c_props', 'send-c_incremental', 'send-c_volume', 'send-c_zstreamdump', 'send-c_lz4_disabled', 'send-c_recv_lz4_disabled', 'send-c_mixed_compression', 'send-c_stream_size_estimate', 'send-c_embedded_blocks', 'send-c_resume', 'send-cpL_varied_recsize', 'send-c_recv_dedup', 'send-L_toggle', 'send_encrypted_hierarchy', 'send_encrypted_props', 'send_encrypted_truncated_files', 'send_freeobjects', 'send_realloc_files', 'send_realloc_encrypted_files', 'send_spill_block', 'send_holds', 'send_hole_birth', 'send_mixed_raw', 'send-wR_encrypted_zvol', 'send_partial_dataset', 'send_invalid', 'send_doall'] tags = ['functional', 'rsend'] [tests/functional/scrub_mirror] tests = ['scrub_mirror_001_pos', 'scrub_mirror_002_pos', 'scrub_mirror_003_pos', 'scrub_mirror_004_pos'] tags = ['functional', 'scrub_mirror'] [tests/functional/slog] tests = ['slog_001_pos', 'slog_002_pos', 'slog_003_pos', 'slog_004_pos', 'slog_005_pos', 'slog_006_pos', 'slog_007_pos', 'slog_008_neg', 'slog_009_neg', 'slog_010_neg', 'slog_011_neg', 'slog_012_neg', 'slog_013_pos', 'slog_014_pos', 'slog_015_neg', 'slog_replay_fs_001', 'slog_replay_fs_002', 'slog_replay_volume'] tags = ['functional', 'slog'] [tests/functional/snapshot] tests = ['clone_001_pos', 'rollback_001_pos', 'rollback_002_pos', 'rollback_003_pos', 'snapshot_001_pos', 'snapshot_002_pos', 'snapshot_003_pos', 'snapshot_004_pos', 'snapshot_005_pos', 'snapshot_006_pos', 'snapshot_007_pos', 'snapshot_008_pos', 'snapshot_009_pos', 'snapshot_010_pos', 'snapshot_011_pos', 'snapshot_012_pos', 'snapshot_013_pos', 'snapshot_014_pos', 'snapshot_017_pos'] tags = ['functional', 'snapshot'] [tests/functional/snapused] tests = ['snapused_001_pos', 'snapused_002_pos', 'snapused_003_pos', 'snapused_004_pos', 'snapused_005_pos'] tags = ['functional', 'snapused'] [tests/functional/sparse] tests = ['sparse_001_pos'] tags = ['functional', 'sparse'] [tests/functional/suid] tests = ['suid_write_to_suid', 'suid_write_to_sgid', 'suid_write_to_suid_sgid', 'suid_write_to_none'] tags = ['functional', 'suid'] [tests/functional/threadsappend] tests = ['threadsappend_001_pos'] tags = ['functional', 'threadsappend'] [tests/functional/trim] tests = ['autotrim_integrity', 'autotrim_config', 'autotrim_trim_integrity', 'trim_integrity', 'trim_config', 'trim_l2arc'] tags = ['functional', 'trim'] [tests/functional/truncate] tests = ['truncate_001_pos', 'truncate_002_pos', 'truncate_timestamps'] tags = ['functional', 'truncate'] [tests/functional/upgrade] tests = ['upgrade_userobj_001_pos', 'upgrade_readonly_pool'] tags = ['functional', 'upgrade'] [tests/functional/userquota] tests = [ 'userquota_001_pos', 'userquota_002_pos', 'userquota_003_pos', 'userquota_004_pos', 'userquota_005_neg', 'userquota_006_pos', 'userquota_007_pos', 'userquota_008_pos', 'userquota_009_pos', 'userquota_010_pos', 'userquota_011_pos', 'userquota_012_neg', 'userspace_001_pos', 'userspace_002_pos', 'userspace_encrypted'] tags = ['functional', 'userquota'] [tests/functional/vdev_zaps] tests = ['vdev_zaps_001_pos', 'vdev_zaps_002_pos', 'vdev_zaps_003_pos', 'vdev_zaps_004_pos', 'vdev_zaps_005_pos', 'vdev_zaps_006_pos', 'vdev_zaps_007_pos'] tags = ['functional', 'vdev_zaps'] [tests/functional/write_dirs] tests = ['write_dirs_001_pos', 'write_dirs_002_pos'] tags = ['functional', 'write_dirs'] [tests/functional/xattr] tests = ['xattr_001_pos', 'xattr_002_neg', 'xattr_003_neg', 'xattr_004_pos', 'xattr_005_pos', 'xattr_006_pos', 'xattr_007_neg', 'xattr_011_pos', 'xattr_012_pos', 'xattr_013_pos'] tags = ['functional', 'xattr'] [tests/functional/zvol/zvol_ENOSPC] tests = ['zvol_ENOSPC_001_pos'] tags = ['functional', 'zvol', 'zvol_ENOSPC'] [tests/functional/zvol/zvol_cli] tests = ['zvol_cli_001_pos', 'zvol_cli_002_pos', 'zvol_cli_003_neg'] tags = ['functional', 'zvol', 'zvol_cli'] [tests/functional/zvol/zvol_misc] tests = ['zvol_misc_002_pos', 'zvol_misc_hierarchy', 'zvol_misc_rename_inuse', 'zvol_misc_snapdev', 'zvol_misc_volmode', 'zvol_misc_zil'] tags = ['functional', 'zvol', 'zvol_misc'] [tests/functional/zvol/zvol_swap] tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_004_pos'] tags = ['functional', 'zvol', 'zvol_swap'] [tests/functional/libzfs] tests = ['many_fds', 'libzfs_input'] tags = ['functional', 'libzfs'] [tests/functional/log_spacemap] tests = ['log_spacemap_import_logs'] pre = post = tags = ['functional', 'log_spacemap'] [tests/functional/l2arc] tests = ['l2arc_arcstats_pos', 'l2arc_mfuonly_pos', 'l2arc_l2miss_pos', 'persist_l2arc_001_pos', 'persist_l2arc_002_pos', 'persist_l2arc_003_neg', 'persist_l2arc_004_pos', 'persist_l2arc_005_pos'] tags = ['functional', 'l2arc'] [tests/functional/zpool_influxdb] tests = ['zpool_influxdb'] tags = ['functional', 'zpool_influxdb'] diff --git a/tests/zfs-tests/cmd/Makefile.am b/tests/zfs-tests/cmd/Makefile.am index 2b965ca70009..d1c29fcd1c62 100644 --- a/tests/zfs-tests/cmd/Makefile.am +++ b/tests/zfs-tests/cmd/Makefile.am @@ -1,37 +1,38 @@ EXTRA_DIST = file_common.h SUBDIRS = \ badsend \ btree_test \ chg_usr_exec \ devname2devid \ dir_rd_update \ draid \ file_check \ file_trunc \ file_write \ get_diff \ largest_file \ libzfs_input_check \ mkbusy \ mkfile \ mkfiles \ mktree \ mmap_exec \ mmap_libaio \ + mmap_seek \ mmapwrite \ nvlist_to_lua \ randwritecomp \ readmmap \ rename_dir \ rm_lnkcnt_zero_file \ send_doall \ stride_dd \ threadsappend if BUILD_LINUX SUBDIRS += \ randfree_file \ user_ns_exec \ xattrtest endif diff --git a/tests/zfs-tests/cmd/mmap_seek/.gitignore b/tests/zfs-tests/cmd/mmap_seek/.gitignore new file mode 100644 index 000000000000..6b05a7917500 --- /dev/null +++ b/tests/zfs-tests/cmd/mmap_seek/.gitignore @@ -0,0 +1 @@ +/mmap_seek diff --git a/tests/zfs-tests/cmd/mmap_seek/Makefile.am b/tests/zfs-tests/cmd/mmap_seek/Makefile.am new file mode 100644 index 000000000000..b938931125f5 --- /dev/null +++ b/tests/zfs-tests/cmd/mmap_seek/Makefile.am @@ -0,0 +1,6 @@ +include $(top_srcdir)/config/Rules.am + +pkgexecdir = $(datadir)/@PACKAGE@/zfs-tests/bin + +pkgexec_PROGRAMS = mmap_seek +mmap_seek_SOURCES = mmap_seek.c diff --git a/tests/zfs-tests/cmd/mmap_seek/mmap_seek.c b/tests/zfs-tests/cmd/mmap_seek/mmap_seek.c new file mode 100644 index 000000000000..f476e1dba9a4 --- /dev/null +++ b/tests/zfs-tests/cmd/mmap_seek/mmap_seek.c @@ -0,0 +1,147 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ + +/* + * Copyright (c) 2021 by Lawrence Livermore National Security, LLC. + */ + +#include +#include +#include +#include +#include +#include +#include + +static void +seek_data(int fd, off_t offset, off_t expected) +{ + off_t data_offset = lseek(fd, offset, SEEK_DATA); + if (data_offset != expected) { + fprintf(stderr, "lseek(fd, %d, SEEK_DATA) = %d (expected %d)\n", + (int)offset, (int)data_offset, (int)expected); + exit(2); + } +} + +static void +seek_hole(int fd, off_t offset, off_t expected) +{ + off_t hole_offset = lseek(fd, offset, SEEK_HOLE); + if (hole_offset != expected) { + fprintf(stderr, "lseek(fd, %d, SEEK_HOLE) = %d (expected %d)\n", + (int)offset, (int)hole_offset, (int)expected); + exit(2); + } +} + +int +main(int argc, char **argv) +{ + char *execname = argv[0]; + char *file_path = argv[1]; + char *buf = NULL; + int err; + + if (argc != 4) { + (void) printf("usage: %s " + "\n", argv[0]); + exit(1); + } + + int fd = open(file_path, O_RDWR | O_CREAT, 0666); + if (fd == -1) { + (void) fprintf(stderr, "%s: %s: ", execname, file_path); + perror("open"); + exit(2); + } + + off_t file_size = atoi(argv[2]); + off_t block_size = atoi(argv[3]); + + if (block_size * 2 > file_size) { + (void) fprintf(stderr, "file size must be at least " + "double the block size\n"); + exit(2); + } + + err = ftruncate(fd, file_size); + if (err == -1) { + perror("ftruncate"); + exit(2); + } + + if ((buf = mmap(NULL, file_size, PROT_READ | PROT_WRITE, + MAP_SHARED, fd, 0)) == MAP_FAILED) { + perror("mmap"); + exit(2); + } + + /* Verify the file is sparse and reports no data. */ + seek_data(fd, 0, -1); + + /* Verify the file is reported as a hole. */ + seek_hole(fd, 0, 0); + + /* Verify search beyond end of file is an error. */ + seek_data(fd, 2 * file_size, -1); + seek_hole(fd, 2 * file_size, -1); + + /* Dirty the first byte. */ + memset(buf, 'a', 1); + seek_data(fd, 0, 0); + seek_data(fd, block_size, -1); + seek_hole(fd, 0, block_size); + seek_hole(fd, block_size, block_size); + + /* Dirty the first half of the file. */ + memset(buf, 'b', file_size / 2); + seek_data(fd, 0, 0); + seek_data(fd, block_size, block_size); + seek_hole(fd, 0, P2ROUNDUP(file_size / 2, block_size)); + seek_hole(fd, block_size, P2ROUNDUP(file_size / 2, block_size)); + + /* Dirty the whole file. */ + memset(buf, 'c', file_size); + seek_data(fd, 0, 0); + seek_data(fd, file_size * 3 / 4, + P2ROUNDUP(file_size * 3 / 4, block_size)); + seek_hole(fd, 0, file_size); + seek_hole(fd, file_size / 2, file_size); + + /* Punch a hole (required compression be enabled). */ + memset(buf + block_size, 0, block_size); + seek_data(fd, 0, 0); + seek_data(fd, block_size, 2 * block_size); + seek_hole(fd, 0, block_size); + seek_hole(fd, block_size, block_size); + seek_hole(fd, 2 * block_size, file_size); + + err = munmap(buf, file_size); + if (err == -1) { + perror("munmap"); + exit(2); + } + + close(fd); + + return (0); +} diff --git a/tests/zfs-tests/include/commands.cfg b/tests/zfs-tests/include/commands.cfg index 1ec73f25bae7..4497a6248b4b 100644 --- a/tests/zfs-tests/include/commands.cfg +++ b/tests/zfs-tests/include/commands.cfg @@ -1,223 +1,224 @@ # # Copyright (c) 2016, 2019 by Delphix. All rights reserved. # These variables are used by zfs-tests.sh to constrain which utilities # may be used by the suite. The suite will create a directory which is # the only element of $PATH and create symlinks from that dir to the # binaries listed below. # # Please keep the contents of each variable sorted for ease of reading # and maintenance. # export SYSTEM_FILES_COMMON='arp awk base64 basename bc bunzip2 bzcat cat chgrp chmod chown cksum cmp cp cpio cut date dd df diff dirname dmesg du echo egrep env expr false file find fio getconf getent getfacl grep gunzip gzip head hostname id iostat kill ksh ln logname ls mkdir mknod mktemp mount mv net od openssl pamtester pax pgrep ping pkill printenv printf ps pwd python python2 python3 quotaon readlink rm rmdir scp script sed seq setfacl sh sleep sort ssh stat strings su sudo sum swapoff swapon sync tail tar tee timeout touch tr true truncate umask umount uname uniq uuidgen vmstat wait wc which xargs' export SYSTEM_FILES_FREEBSD='chflags compress diskinfo dumpon fsck getextattr gpart jail jexec jls lsextattr md5 mdconfig mkfifo newfs pw rmextattr setextattr sha256 showmount swapctl sysctl uncompress' export SYSTEM_FILES_LINUX='attr bash blkid blockdev chattr dmidecode exportfs fallocate fdisk free getfattr groupadd groupdel groupmod hostid losetup lsattr lsblk lscpu lsmod lsscsi md5sum mkswap modprobe mpstat nproc parted perf setenforce setfattr sha256sum udevadm useradd userdel usermod' export ZFS_FILES='zdb zfs zhack zinject zpool ztest raidz_test arc_summary arcstat dbufstat mount.zfs zed zgenhostid zstream zfs_ids_to_path zpool_influxdb' export ZFSTEST_FILES='badsend btree_test chg_usr_exec devname2devid dir_rd_update draid file_check file_trunc file_write get_diff largest_file libzfs_input_check mkbusy mkfile mkfiles mktree mmap_exec mmap_libaio + mmap_seek mmapwrite nvlist_to_lua randfree_file randwritecomp readmmap rename_dir rm_lnkcnt_zero_file send_doall threadsappend user_ns_exec xattrtest stride_dd' diff --git a/tests/zfs-tests/include/tunables.cfg b/tests/zfs-tests/include/tunables.cfg index 56d430a39875..fff43e469165 100644 --- a/tests/zfs-tests/include/tunables.cfg +++ b/tests/zfs-tests/include/tunables.cfg @@ -1,95 +1,96 @@ # This file exports variables for each tunable used in the test suite. # # Different platforms use different names for most tunables. To avoid littering # the tests with conditional logic for deciding how to set each tunable, the # logic is instead consolidated to this one file. # # Any use of tunables in tests must use a name defined here. New entries # should be added to the table as needed. Please keep the table sorted # alphabetically for ease of maintenance. # # Platform-specific tunables should still use a NAME from this table for # consistency. Enter UNSUPPORTED in the column for platforms on which the # tunable is not implemented. UNAME=$(uname) # NAME FreeBSD tunable Linux tunable cat <<%%%% | ADMIN_SNAPSHOT UNSUPPORTED zfs_admin_snapshot ALLOW_REDACTED_DATASET_MOUNT allow_redacted_dataset_mount zfs_allow_redacted_dataset_mount ARC_MAX arc.max zfs_arc_max ARC_MIN arc.min zfs_arc_min ASYNC_BLOCK_MAX_BLOCKS async_block_max_blocks zfs_async_block_max_blocks CHECKSUM_EVENTS_PER_SECOND checksum_events_per_second zfs_checksum_events_per_second COMMIT_TIMEOUT_PCT commit_timeout_pct zfs_commit_timeout_pct COMPRESSED_ARC_ENABLED compressed_arc_enabled zfs_compressed_arc_enabled CONDENSE_INDIRECT_COMMIT_ENTRY_DELAY_MS condense.indirect_commit_entry_delay_ms zfs_condense_indirect_commit_entry_delay_ms CONDENSE_INDIRECT_OBSOLETE_PCT condense.indirect_obsolete_pct zfs_condense_indirect_obsolete_pct CONDENSE_MIN_MAPPING_BYTES condense.min_mapping_bytes zfs_condense_min_mapping_bytes DBUF_CACHE_SHIFT dbuf.cache_shift dbuf_cache_shift DEADMAN_CHECKTIME_MS deadman.checktime_ms zfs_deadman_checktime_ms DEADMAN_FAILMODE deadman.failmode zfs_deadman_failmode DEADMAN_SYNCTIME_MS deadman.synctime_ms zfs_deadman_synctime_ms DEADMAN_ZIOTIME_MS deadman.ziotime_ms zfs_deadman_ziotime_ms DISABLE_IVSET_GUID_CHECK disable_ivset_guid_check zfs_disable_ivset_guid_check +DMU_OFFSET_NEXT_SYNC dmu_offset_next_sync zfs_dmu_offset_next_sync INITIALIZE_CHUNK_SIZE initialize_chunk_size zfs_initialize_chunk_size INITIALIZE_VALUE initialize_value zfs_initialize_value KEEP_LOG_SPACEMAPS_AT_EXPORT keep_log_spacemaps_at_export zfs_keep_log_spacemaps_at_export LUA_MAX_MEMLIMIT lua.max_memlimit zfs_lua_max_memlimit L2ARC_MFUONLY l2arc.mfuonly l2arc_mfuonly L2ARC_NOPREFETCH l2arc.noprefetch l2arc_noprefetch L2ARC_REBUILD_BLOCKS_MIN_L2SIZE l2arc.rebuild_blocks_min_l2size l2arc_rebuild_blocks_min_l2size L2ARC_REBUILD_ENABLED l2arc.rebuild_enabled l2arc_rebuild_enabled L2ARC_TRIM_AHEAD l2arc.trim_ahead l2arc_trim_ahead L2ARC_WRITE_BOOST l2arc.write_boost l2arc_write_boost L2ARC_WRITE_MAX l2arc.write_max l2arc_write_max LIVELIST_CONDENSE_NEW_ALLOC livelist.condense.new_alloc zfs_livelist_condense_new_alloc LIVELIST_CONDENSE_SYNC_CANCEL livelist.condense.sync_cancel zfs_livelist_condense_sync_cancel LIVELIST_CONDENSE_SYNC_PAUSE livelist.condense.sync_pause zfs_livelist_condense_sync_pause LIVELIST_CONDENSE_ZTHR_CANCEL livelist.condense.zthr_cancel zfs_livelist_condense_zthr_cancel LIVELIST_CONDENSE_ZTHR_PAUSE livelist.condense.zthr_pause zfs_livelist_condense_zthr_pause LIVELIST_MAX_ENTRIES livelist.max_entries zfs_livelist_max_entries LIVELIST_MIN_PERCENT_SHARED livelist.min_percent_shared zfs_livelist_min_percent_shared MAX_DATASET_NESTING max_dataset_nesting zfs_max_dataset_nesting MAX_MISSING_TVDS max_missing_tvds zfs_max_missing_tvds METASLAB_DEBUG_LOAD metaslab.debug_load metaslab_debug_load METASLAB_FORCE_GANGING metaslab.force_ganging metaslab_force_ganging MULTIHOST_FAIL_INTERVALS multihost.fail_intervals zfs_multihost_fail_intervals MULTIHOST_HISTORY multihost.history zfs_multihost_history MULTIHOST_IMPORT_INTERVALS multihost.import_intervals zfs_multihost_import_intervals MULTIHOST_INTERVAL multihost.interval zfs_multihost_interval OVERRIDE_ESTIMATE_RECORDSIZE send.override_estimate_recordsize zfs_override_estimate_recordsize PREFETCH_DISABLE prefetch.disable zfs_prefetch_disable REBUILD_SCRUB_ENABLED rebuild_scrub_enabled zfs_rebuild_scrub_enabled REMOVAL_SUSPEND_PROGRESS removal_suspend_progress zfs_removal_suspend_progress REMOVE_MAX_SEGMENT remove_max_segment zfs_remove_max_segment RESILVER_MIN_TIME_MS resilver_min_time_ms zfs_resilver_min_time_ms SCAN_LEGACY scan_legacy zfs_scan_legacy SCAN_SUSPEND_PROGRESS scan_suspend_progress zfs_scan_suspend_progress SCAN_VDEV_LIMIT scan_vdev_limit zfs_scan_vdev_limit SEND_HOLES_WITHOUT_BIRTH_TIME send_holes_without_birth_time send_holes_without_birth_time SLOW_IO_EVENTS_PER_SECOND slow_io_events_per_second zfs_slow_io_events_per_second SPA_ASIZE_INFLATION spa.asize_inflation spa_asize_inflation SPA_DISCARD_MEMORY_LIMIT spa.discard_memory_limit zfs_spa_discard_memory_limit SPA_LOAD_VERIFY_DATA spa.load_verify_data spa_load_verify_data SPA_LOAD_VERIFY_METADATA spa.load_verify_metadata spa_load_verify_metadata TRIM_EXTENT_BYTES_MIN trim.extent_bytes_min zfs_trim_extent_bytes_min TRIM_METASLAB_SKIP trim.metaslab_skip zfs_trim_metaslab_skip TRIM_TXG_BATCH trim.txg_batch zfs_trim_txg_batch TXG_HISTORY txg.history zfs_txg_history TXG_TIMEOUT txg.timeout zfs_txg_timeout UNLINK_SUSPEND_PROGRESS UNSUPPORTED zfs_unlink_suspend_progress VDEV_FILE_PHYSICAL_ASHIFT vdev.file.physical_ashift vdev_file_physical_ashift VDEV_MIN_MS_COUNT vdev.min_ms_count zfs_vdev_min_ms_count VDEV_VALIDATE_SKIP vdev.validate_skip vdev_validate_skip VOL_INHIBIT_DEV UNSUPPORTED zvol_inhibit_dev VOL_MODE vol.mode zvol_volmode VOL_RECURSIVE vol.recursive UNSUPPORTED ZEVENT_LEN_MAX zevent.len_max zfs_zevent_len_max ZEVENT_RETAIN_MAX zevent.retain_max zfs_zevent_retain_max ZIO_SLOW_IO_MS zio.slow_io_ms zio_slow_io_ms %%%% while read name FreeBSD Linux; do eval "export ${name}=\$${UNAME}" done diff --git a/tests/zfs-tests/tests/functional/mmap/Makefile.am b/tests/zfs-tests/tests/functional/mmap/Makefile.am index 2adc398b8c09..b26791ee7ce0 100644 --- a/tests/zfs-tests/tests/functional/mmap/Makefile.am +++ b/tests/zfs-tests/tests/functional/mmap/Makefile.am @@ -1,10 +1,11 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/mmap dist_pkgdata_SCRIPTS = \ setup.ksh \ cleanup.ksh \ mmap_read_001_pos.ksh \ mmap_write_001_pos.ksh \ - mmap_libaio_001_pos.ksh + mmap_libaio_001_pos.ksh \ + mmap_seek_001_pos.ksh dist_pkgdata_DATA = \ mmap.cfg diff --git a/tests/zfs-tests/tests/functional/mmap/mmap_seek_001_pos.ksh b/tests/zfs-tests/tests/functional/mmap/mmap_seek_001_pos.ksh new file mode 100755 index 000000000000..6188549ad8d2 --- /dev/null +++ b/tests/zfs-tests/tests/functional/mmap/mmap_seek_001_pos.ksh @@ -0,0 +1,67 @@ +#!/bin/ksh -p +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or http://www.opensolaris.org/os/licensing. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# + +# +# Copyright (c) 2021 by Lawrence Livermore National Security, LLC. +# + +. $STF_SUITE/include/libtest.shlib +. $STF_SUITE/tests/functional/mmap/mmap.cfg + +# +# DESCRIPTION: +# lseek() data/holes for an mmap()'d file. +# +# STRATEGY: +# 1. Enable compression and hole reporting for dirty files. +# 2. Call mmap_seek binary test case for various record sizes. +# + +verify_runnable "global" + +function cleanup +{ + log_must zfs set compression=off $TESTPOOL/$TESTFS + log_must zfs set recordsize=128k $TESTPOOL/$TESTFS + log_must rm -f $TESTDIR/test-mmap-file + log_must set_tunable64 DMU_OFFSET_NEXT_SYNC $dmu_offset_next_sync +} + +log_assert "lseek() data/holes for an mmap()'d file." + +log_onexit cleanup + +# Enable hole reporting for dirty files. +typeset dmu_offset_next_sync=$(get_tunable DMU_OFFSET_NEXT_SYNC) +log_must set_tunable64 DMU_OFFSET_NEXT_SYNC 1 + +# Compression must be enabled to convert zero'd blocks to holes. +# This behavior is checked by the mmap_seek test. +log_must zfs set compression=on $TESTPOOL/$TESTFS + +for bs in 4096 8192 16384 32768 65536 131072; do + log_must zfs set recordsize=$bs $TESTPOOL/$TESTFS + log_must mmap_seek $TESTDIR/test-mmap-file $((1024*1024)) $bs + log_must rm $TESTDIR/test-mmap-file +done + +log_pass "lseek() data/holes for an mmap()'d file succeeded."