diff --git a/sys/amd64/amd64/machdep.c b/sys/amd64/amd64/machdep.c index 8174a8e850c8..05342b31d2aa 100644 --- a/sys/amd64/amd64/machdep.c +++ b/sys/amd64/amd64/machdep.c @@ -1,1903 +1,1901 @@ /*- * SPDX-License-Identifier: BSD-4-Clause * * Copyright (c) 2003 Peter Wemm. * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_atpic.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" -#include "opt_mp_watchdog.h" #include "opt_pci.h" #include "opt_platform.h" #include "opt_sched.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #include #include #include #include #include #include #include #include #include -#include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_ATPIC #include #else #include #endif #include #include #include /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); /* * The PTI trampoline stack needs enough space for a hardware trapframe and a * couple of scratch registers, as well as the trapframe left behind after an * iret fault. */ CTASSERT(PC_PTI_STACK_SZ * sizeof(register_t) >= 2 * sizeof(struct pti_frame) - offsetof(struct pti_frame, pti_rip)); extern u_int64_t hammer_time(u_int64_t, u_int64_t); static void cpu_startup(void *); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); /* Probe 8254 PIT and TSC. */ static void native_clock_source_init(void); /* Preload data parse function */ static caddr_t native_parse_preload_data(u_int64_t); /* Native function to fetch and parse the e820 map */ static void native_parse_memmap(caddr_t, vm_paddr_t *, int *); /* Default init_ops implementation. */ struct init_ops init_ops = { .parse_preload_data = native_parse_preload_data, .early_clock_source_init = native_clock_source_init, .early_delay = i8254_delay, .parse_memmap = native_parse_memmap, }; /* * Physical address of the EFI System Table. Stashed from the metadata hints * passed into the kernel and used by the EFI code to call runtime services. */ vm_paddr_t efi_systbl_phys; /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; int cold = 1; long Maxmem = 0; long realmem = 0; int late_console = 1; struct kva_md_info kmi; struct region_descriptor r_idt; struct pcpu *__pcpu; struct pcpu temp_bsp_pcpu; struct mtx icu_lock; struct mem_range_softc mem_range_softc; struct mtx dt_lock; /* lock for GDT and LDT */ void (*vmm_resume_p)(void); bool efi_boot; static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = kern_getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = kern_getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)vm_free_count())) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)vm_free_count()), ptoa((uintmax_t)vm_free_count()) / 1048576); #ifdef DEV_PCI if (bootverbose && intel_graphics_stolen_base != 0) printf("intel stolen mem: base %#jx size %ju MB\n", (uintmax_t)intel_graphics_stolen_base, (uintmax_t)intel_graphics_stolen_size / 1024 / 1024); #endif /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } static void late_ifunc_resolve(void *dummy __unused) { link_elf_late_ireloc(); } SYSINIT(late_ifunc_resolve, SI_SUB_CPU, SI_ORDER_ANY, late_ifunc_resolve, NULL); void cpu_setregs(void) { register_t cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the * BSP. See the comments there about why we set them. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); } /* * Initialize amd64 and configure to run kernel */ /* * Initialize segments & interrupt table */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ static char dblfault_stack[DBLFAULT_STACK_SIZE] __aligned(16); static char mce0_stack[MCE_STACK_SIZE] __aligned(16); static char nmi0_stack[NMI_STACK_SIZE] __aligned(16); static char dbg0_stack[DBG_STACK_SIZE] __aligned(16); CTASSERT(sizeof(struct nmi_pcpu) == 16); /* * Software prototypes -- in more palatable form. * * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same * slots as corresponding segments for i386 kernel. */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GNULL2_SEL 1 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUFS32_SEL 2 32 bit %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS32_SEL 3 32 bit %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GUCODE32_SEL 6 32 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 8 64 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct amd64tss) + IOPERM_BITMAP_SIZE - 1, .ssd_type = SDT_SYSTSS, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Actually, the TSS is a system descriptor which is double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 LDT Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 12 LDT Descriptor, double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, }; _Static_assert(nitems(gdt_segs) == NGDT, "Stale NGDT"); void setidt(int idx, inthand_t *func, int typ, int dpl, int ist) { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (uintptr_t)func; ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); ip->gd_ist = ist; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((uintptr_t)func)>>16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), IDTVEC(dblfault), IDTVEC(div_pti), IDTVEC(bpt_pti), IDTVEC(ofl_pti), IDTVEC(bnd_pti), IDTVEC(ill_pti), IDTVEC(dna_pti), IDTVEC(fpusegm_pti), IDTVEC(tss_pti), IDTVEC(missing_pti), IDTVEC(stk_pti), IDTVEC(prot_pti), IDTVEC(page_pti), IDTVEC(rsvd_pti), IDTVEC(fpu_pti), IDTVEC(align_pti), IDTVEC(xmm_pti), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), IDTVEC(dtrace_ret_pti), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), IDTVEC(xen_intr_upcall_pti), #endif IDTVEC(fast_syscall), IDTVEC(fast_syscall32), IDTVEC(fast_syscall_pti); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND_FLAGS(idt, db_show_idt, DB_CMD_MEMSAFE) { struct gate_descriptor *ip; int idx; uintptr_t func; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND_FLAGS(sysregs, db_show_sysregs, DB_CMD_MEMSAFE) { struct { uint16_t limit; uint64_t base; } __packed idtr, gdtr; uint16_t ldt, tr; __asm __volatile("sidt %0" : "=m" (idtr)); db_printf("idtr\t0x%016lx/%04x\n", (u_long)idtr.base, (u_int)idtr.limit); __asm __volatile("sgdt %0" : "=m" (gdtr)); db_printf("gdtr\t0x%016lx/%04x\n", (u_long)gdtr.base, (u_int)gdtr.limit); __asm __volatile("sldt %0" : "=r" (ldt)); db_printf("ldtr\t0x%04x\n", ldt); __asm __volatile("str %0" : "=r" (tr)); db_printf("tr\t0x%04x\n", tr); db_printf("cr0\t0x%016lx\n", rcr0()); db_printf("cr2\t0x%016lx\n", rcr2()); db_printf("cr3\t0x%016lx\n", rcr3()); db_printf("cr4\t0x%016lx\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016lx\n", rxcr(0)); db_printf("EFER\t0x%016lx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t%016lx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); db_printf("DEBUG_CTL\t0x%016lx\n", rdmsr(MSR_DEBUGCTLMSR)); db_printf("PAT\t0x%016lx\n", rdmsr(MSR_PAT)); db_printf("GSBASE\t0x%016lx\n", rdmsr(MSR_GSBASE)); } DB_SHOW_COMMAND_FLAGS(dbregs, db_show_dbregs, DB_CMD_MEMSAFE) { db_printf("dr0\t0x%016lx\n", rdr0()); db_printf("dr1\t0x%016lx\n", rdr1()); db_printf("dr2\t0x%016lx\n", rdr2()); db_printf("dr3\t0x%016lx\n", rdr3()); db_printf("dr6\t0x%016lx\n", rdr6()); db_printf("dr7\t0x%016lx\n", rdr7()); } #endif void sdtossd(sd, ssd) struct user_segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_long = sd->sd_long; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } void ssdtosd(ssd, sd) struct soft_segment_descriptor *ssd; struct user_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_long = ssd->ssd_long; sd->sd_def32 = ssd->ssd_def32; sd->sd_gran = ssd->ssd_gran; } void ssdtosyssd(ssd, sd) struct soft_segment_descriptor *ssd; struct system_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_gran = ssd->ssd_gran; } u_int basemem; static int add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, int *physmap_idxp) { int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (length == 0) return (1); /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. * * NB: physmap_idx points to the next free slot. */ insert_idx = physmap_idx; for (i = 0; i <= physmap_idx; i += 2) { if (base < physmap[i + 1]) { if (base + length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { physmap[insert_idx] = base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYS_AVAIL_ENTRIES) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = (physmap_idx - 2); i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = base; physmap[insert_idx + 1] = base + length; return (1); } void bios_add_smap_entries(struct bios_smap *smapbase, u_int32_t smapsize, vm_paddr_t *physmap, int *physmap_idx) { struct bios_smap *smap, *smapend; smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); for (smap = smapbase; smap < smapend; smap++) { if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016lx len=%016lx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) continue; if (!add_physmap_entry(smap->base, smap->length, physmap, physmap_idx)) break; } } static void add_efi_map_entries(struct efi_map_header *efihdr, vm_paddr_t *physmap, int *physmap_idx) { struct efi_md *map, *p; const char *type; size_t efisz; int ndesc, i; static const char *types[] = { "Reserved", "LoaderCode", "LoaderData", "BootServicesCode", "BootServicesData", "RuntimeServicesCode", "RuntimeServicesData", "ConventionalMemory", "UnusableMemory", "ACPIReclaimMemory", "ACPIMemoryNVS", "MemoryMappedIO", "MemoryMappedIOPortSpace", "PalCode", "PersistentMemory" }; /* * Memory map data provided by UEFI via the GetMemoryMap * Boot Services API. */ efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf; map = (struct efi_md *)((uint8_t *)efihdr + efisz); if (efihdr->descriptor_size == 0) return; ndesc = efihdr->memory_size / efihdr->descriptor_size; if (boothowto & RB_VERBOSE) printf("%23s %12s %12s %8s %4s\n", "Type", "Physical", "Virtual", "#Pages", "Attr"); for (i = 0, p = map; i < ndesc; i++, p = efi_next_descriptor(p, efihdr->descriptor_size)) { if (boothowto & RB_VERBOSE) { if (p->md_type < nitems(types)) type = types[p->md_type]; else type = ""; printf("%23s %012lx %012lx %08lx ", type, p->md_phys, p->md_virt, p->md_pages); if (p->md_attr & EFI_MD_ATTR_UC) printf("UC "); if (p->md_attr & EFI_MD_ATTR_WC) printf("WC "); if (p->md_attr & EFI_MD_ATTR_WT) printf("WT "); if (p->md_attr & EFI_MD_ATTR_WB) printf("WB "); if (p->md_attr & EFI_MD_ATTR_UCE) printf("UCE "); if (p->md_attr & EFI_MD_ATTR_WP) printf("WP "); if (p->md_attr & EFI_MD_ATTR_RP) printf("RP "); if (p->md_attr & EFI_MD_ATTR_XP) printf("XP "); if (p->md_attr & EFI_MD_ATTR_NV) printf("NV "); if (p->md_attr & EFI_MD_ATTR_MORE_RELIABLE) printf("MORE_RELIABLE "); if (p->md_attr & EFI_MD_ATTR_RO) printf("RO "); if (p->md_attr & EFI_MD_ATTR_RT) printf("RUNTIME"); printf("\n"); } switch (p->md_type) { case EFI_MD_TYPE_CODE: case EFI_MD_TYPE_DATA: case EFI_MD_TYPE_BS_CODE: case EFI_MD_TYPE_BS_DATA: case EFI_MD_TYPE_FREE: /* * We're allowed to use any entry with these types. */ break; default: continue; } if (!add_physmap_entry(p->md_phys, p->md_pages * EFI_PAGE_SIZE, physmap, physmap_idx)) break; } } static void native_parse_memmap(caddr_t kmdp, vm_paddr_t *physmap, int *physmap_idx) { struct bios_smap *smap; struct efi_map_header *efihdr; u_int32_t size; /* * Memory map from INT 15:E820. * * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes smap. */ efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); smap = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (efihdr == NULL && smap == NULL) panic("No BIOS smap or EFI map info from loader!"); if (efihdr != NULL) { add_efi_map_entries(efihdr, physmap, physmap_idx); strlcpy(bootmethod, "UEFI", sizeof(bootmethod)); } else { size = *((u_int32_t *)smap - 1); bios_add_smap_entries(smap, size, physmap, physmap_idx); strlcpy(bootmethod, "BIOS", sizeof(bootmethod)); } } #define PAGES_PER_GB (1024 * 1024 * 1024 / PAGE_SIZE) /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ static void getmemsize(caddr_t kmdp, u_int64_t first) { int i, physmap_idx, pa_indx, da_indx; vm_paddr_t pa, physmap[PHYS_AVAIL_ENTRIES]; u_long physmem_start, physmem_tunable, memtest; pt_entry_t *pte; quad_t dcons_addr, dcons_size; int page_counter; /* * Tell the physical memory allocator about pages used to store * the kernel and preloaded data. See kmem_bootstrap_free(). */ vm_phys_early_add_seg((vm_paddr_t)kernphys, trunc_page(first)); bzero(physmap, sizeof(physmap)); physmap_idx = 0; init_ops.parse_memmap(kmdp, physmap, &physmap_idx); physmap_idx -= 2; /* * Find the 'base memory' segment for SMP */ basemem = 0; for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] <= 0xA0000) { basemem = physmap[i + 1] / 1024; break; } } if (basemem == 0 || basemem > 640) { if (bootverbose) printf( "Memory map doesn't contain a basemem segment, faking it"); basemem = 640; } /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * The boot memory test is disabled by default, as it takes a * significant amount of time on large-memory systems, and is * unfriendly to virtual machines as it unnecessarily touches all * pages. * * A general name is used as the code may be extended to support * additional tests beyond the current "page present" test. */ memtest = 0; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); /* * Don't allow MAXMEM or hw.physmem to extend the amount of memory * in the system. */ if (Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(&first); /* * Size up each available chunk of physical memory. * * XXX Some BIOSes corrupt low 64KB between suspend and resume. * By default, mask off the first 16 pages unless we appear to be * running in a VM. */ physmem_start = (vm_guest > VM_GUEST_NO ? 1 : 16) << PAGE_SHIFT; TUNABLE_ULONG_FETCH("hw.physmem.start", &physmem_start); if (physmap[0] < physmem_start) { if (physmem_start < PAGE_SIZE) physmap[0] = PAGE_SIZE; else if (physmem_start >= physmap[1]) physmap[0] = round_page(physmap[1] - PAGE_SIZE); else physmap[0] = round_page(physmem_start); } pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP1; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ page_counter = 0; if (memtest != 0) printf("Testing system memory"); for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR1; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= (vm_paddr_t)kernphys && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * Print a "." every GB to show we're making * progress. */ page_counter++; if ((page_counter % PAGES_PER_GB) == 0) printf("."); /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | PG_NC_PWT | PG_NC_PCD; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ENTRIES) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == PHYS_AVAIL_ENTRIES) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); if (memtest != 0) printf("\n"); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]); } static caddr_t native_parse_preload_data(u_int64_t modulep) { caddr_t kmdp; char *envp; #ifdef DDB vm_offset_t ksym_start; vm_offset_t ksym_end; #endif preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); preload_bootstrap_relocate(KERNBASE); kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *); if (envp != NULL) envp += KERNBASE; init_static_kenv(envp, 0); #ifdef DDB ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); db_fetch_ksymtab(ksym_start, ksym_end, 0); #endif efi_systbl_phys = MD_FETCH(kmdp, MODINFOMD_FW_HANDLE, vm_paddr_t); return (kmdp); } static void native_clock_source_init(void) { i8254_init(); } static void amd64_kdb_init(void) { kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif } /* Set up the fast syscall stuff */ void amd64_conf_fast_syscall(void) { uint64_t msr; msr = rdmsr(MSR_EFER) | EFER_SCE; wrmsr(MSR_EFER, msr); wrmsr(MSR_LSTAR, pti ? (u_int64_t)IDTVEC(fast_syscall_pti) : (u_int64_t)IDTVEC(fast_syscall)); wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); wrmsr(MSR_STAR, msr); wrmsr(MSR_SF_MASK, PSL_NT | PSL_T | PSL_I | PSL_C | PSL_D | PSL_AC); } void amd64_bsp_pcpu_init1(struct pcpu *pc) { struct user_segment_descriptor *gdt; PCPU_SET(prvspace, pc); gdt = *PCPU_PTR(gdt); PCPU_SET(curthread, &thread0); PCPU_SET(tssp, PCPU_PTR(common_tss)); PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); PCPU_SET(fs32p, &gdt[GUFS32_SEL]); PCPU_SET(gs32p, &gdt[GUGS32_SEL]); PCPU_SET(ucr3_load_mask, PMAP_UCR3_NOMASK); PCPU_SET(smp_tlb_gen, 1); } void amd64_bsp_pcpu_init2(uint64_t rsp0) { PCPU_SET(rsp0, rsp0); PCPU_SET(pti_rsp0, ((vm_offset_t)PCPU_PTR(pti_stack) + PC_PTI_STACK_SZ * sizeof(uint64_t)) & ~0xful); PCPU_SET(curpcb, thread0.td_pcb); } void amd64_bsp_ist_init(struct pcpu *pc) { struct nmi_pcpu *np; struct amd64tss *tssp; tssp = &pc->pc_common_tss; /* doublefault stack space, runs on ist1 */ np = ((struct nmi_pcpu *)&dblfault_stack[sizeof(dblfault_stack)]) - 1; np->np_pcpu = (register_t)pc; tssp->tss_ist1 = (long)np; /* * NMI stack, runs on ist2. The pcpu pointer is stored just * above the start of the ist2 stack. */ np = ((struct nmi_pcpu *)&nmi0_stack[sizeof(nmi0_stack)]) - 1; np->np_pcpu = (register_t)pc; tssp->tss_ist2 = (long)np; /* * MC# stack, runs on ist3. The pcpu pointer is stored just * above the start of the ist3 stack. */ np = ((struct nmi_pcpu *)&mce0_stack[sizeof(mce0_stack)]) - 1; np->np_pcpu = (register_t)pc; tssp->tss_ist3 = (long)np; /* * DB# stack, runs on ist4. */ np = ((struct nmi_pcpu *)&dbg0_stack[sizeof(dbg0_stack)]) - 1; np->np_pcpu = (register_t)pc; tssp->tss_ist4 = (long)np; } /* * Calculate the kernel load address by inspecting page table created by loader. * The assumptions: * - kernel is mapped at KERNBASE, backed by contiguous phys memory * aligned at 2M, below 4G (the latter is important for AP startup) * - there is a 2M hole at KERNBASE (KERNSTART = KERNBASE + 2M) * - kernel is mapped with 2M superpages * - all participating memory, i.e. kernel, modules, metadata, * page table is accessible by pre-created 1:1 mapping * (right now loader creates 1:1 mapping for lower 4G, and all * memory is from there) * - there is a usable memory block right after the end of the * mapped kernel and all modules/metadata, pointed to by * physfree, for early allocations */ vm_paddr_t __nosanitizeaddress __nosanitizememory amd64_loadaddr(void) { pml4_entry_t *pml4e; pdp_entry_t *pdpe; pd_entry_t *pde; uint64_t cr3; cr3 = rcr3(); pml4e = (pml4_entry_t *)cr3 + pmap_pml4e_index(KERNSTART); pdpe = (pdp_entry_t *)(*pml4e & PG_FRAME) + pmap_pdpe_index(KERNSTART); pde = (pd_entry_t *)(*pdpe & PG_FRAME) + pmap_pde_index(KERNSTART); return (*pde & PG_FRAME); } u_int64_t hammer_time(u_int64_t modulep, u_int64_t physfree) { caddr_t kmdp; int gsel_tss, x; struct pcpu *pc; uint64_t rsp0; char *env; struct user_segment_descriptor *gdt; struct region_descriptor r_gdt; size_t kstack0_sz; TSRAW(&thread0, TS_ENTER, __func__, NULL); kernphys = amd64_loadaddr(); physfree += kernphys; kmdp = init_ops.parse_preload_data(modulep); efi_boot = preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP) != NULL; if (!efi_boot) { /* Tell the bios to warmboot next time */ atomic_store_short((u_short *)0x472, 0x1234); } physfree += ucode_load_bsp(physfree - kernphys + KERNSTART); physfree = roundup2(physfree, PAGE_SIZE); identify_cpu1(); identify_hypervisor(); identify_cpu_fixup_bsp(); identify_cpu2(); initializecpucache(); /* * Check for pti, pcid, and invpcid before ifuncs are * resolved, to correctly select the implementation for * pmap_activate_sw_mode(). */ pti = pti_get_default(); TUNABLE_INT_FETCH("vm.pmap.pti", &pti); TUNABLE_INT_FETCH("vm.pmap.pcid_enabled", &pmap_pcid_enabled); if ((cpu_feature2 & CPUID2_PCID) != 0 && pmap_pcid_enabled) { invpcid_works = (cpu_stdext_feature & CPUID_STDEXT_INVPCID) != 0; } else { pmap_pcid_enabled = 0; } link_elf_ireloc(kmdp); /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); /* Init basic tunables, hz etc */ init_param1(); thread0.td_kstack = physfree - kernphys + KERNSTART; thread0.td_kstack_pages = kstack_pages; kstack0_sz = thread0.td_kstack_pages * PAGE_SIZE; bzero((void *)thread0.td_kstack, kstack0_sz); physfree += kstack0_sz; /* * Initialize enough of thread0 for delayed invalidation to * work very early. Rely on thread0.td_base_pri * zero-initialization, it is reset to PVM at proc0_init(). */ pmap_thread_init_invl_gen(&thread0); pc = &temp_bsp_pcpu; pcpu_init(pc, 0, sizeof(struct pcpu)); gdt = &temp_bsp_pcpu.pc_gdt[0]; /* * make gdt memory segments */ for (x = 0; x < NGDT; x++) { if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) ssdtosd(&gdt_segs[x], &gdt[x]); } gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&pc->pc_common_tss; ssdtosyssd(&gdt_segs[GPROC0_SEL], (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (long)gdt; lgdt(&r_gdt); wrmsr(MSR_FSBASE, 0); /* User value */ wrmsr(MSR_GSBASE, (u_int64_t)pc); wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ dpcpu_init((void *)(physfree - kernphys + KERNSTART), 0); physfree += DPCPU_SIZE; amd64_bsp_pcpu_init1(pc); /* Non-late cninit() and printf() can be moved up to here. */ /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, pti ? &IDTVEC(rsvd_pti) : &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DE, pti ? &IDTVEC(div_pti) : &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 4); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); setidt(IDT_BP, pti ? &IDTVEC(bpt_pti) : &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); setidt(IDT_OF, pti ? &IDTVEC(ofl_pti) : &IDTVEC(ofl), SDT_SYSIGT, SEL_UPL, 0); setidt(IDT_BR, pti ? &IDTVEC(bnd_pti) : &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_UD, pti ? &IDTVEC(ill_pti) : &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NM, pti ? &IDTVEC(dna_pti) : &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); setidt(IDT_FPUGP, pti ? &IDTVEC(fpusegm_pti) : &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_TS, pti ? &IDTVEC(tss_pti) : &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NP, pti ? &IDTVEC(missing_pti) : &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_SS, pti ? &IDTVEC(stk_pti) : &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_GP, pti ? &IDTVEC(prot_pti) : &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_PF, pti ? &IDTVEC(page_pti) : &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MF, pti ? &IDTVEC(fpu_pti) : &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_AC, pti ? &IDTVEC(align_pti) : &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 3); setidt(IDT_XF, pti ? &IDTVEC(xmm_pti) : &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, pti ? &IDTVEC(dtrace_ret_pti) : &IDTVEC(dtrace_ret), SDT_SYSIGT, SEL_UPL, 0); #endif #ifdef XENHVM setidt(IDT_EVTCHN, pti ? &IDTVEC(xen_intr_upcall_pti) : &IDTVEC(xen_intr_upcall), SDT_SYSIGT, SEL_KPL, 0); #endif r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (long) idt; lidt(&r_idt); /* * Use vt(4) by default for UEFI boot (during the sc(4)/vt(4) * transition). * Once bootblocks have updated, we can test directly for * efi_systbl != NULL here... */ if (efi_boot) vty_set_preferred(VTY_VT); TUNABLE_INT_FETCH("hw.ibrs_disable", &hw_ibrs_disable); TUNABLE_INT_FETCH("machdep.mitigations.ibrs.disable", &hw_ibrs_disable); TUNABLE_INT_FETCH("hw.spec_store_bypass_disable", &hw_ssb_disable); TUNABLE_INT_FETCH("machdep.mitigations.ssb.disable", &hw_ssb_disable); TUNABLE_INT_FETCH("machdep.syscall_ret_l1d_flush", &syscall_ret_l1d_flush_mode); TUNABLE_INT_FETCH("hw.mds_disable", &hw_mds_disable); TUNABLE_INT_FETCH("machdep.mitigations.mds.disable", &hw_mds_disable); TUNABLE_INT_FETCH("machdep.mitigations.taa.enable", &x86_taa_enable); TUNABLE_INT_FETCH("machdep.mitigations.rndgs.enable", &x86_rngds_mitg_enable); finishidentcpu(); /* Final stage of CPU initialization */ /* * Initialize the clock before the console so that console * initialization can use DELAY(). */ clock_init(); initializecpu(); /* Initialize CPU registers */ amd64_bsp_ist_init(pc); /* Set the IO permission bitmap (empty due to tss seg limit) */ pc->pc_common_tss.tss_iobase = sizeof(struct amd64tss) + IOPERM_BITMAP_SIZE; gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); ltr(gsel_tss); amd64_conf_fast_syscall(); /* * We initialize the PCB pointer early so that exception * handlers will work. Also set up td_critnest to short-cut * the page fault handler. */ cpu_max_ext_state_size = sizeof(struct savefpu); set_top_of_stack_td(&thread0); thread0.td_pcb = get_pcb_td(&thread0); thread0.td_critnest = 1; /* * The console and kdb should be initialized even earlier than here, * but some console drivers don't work until after getmemsize(). * Default to late console initialization to support these drivers. * This loses mainly printf()s in getmemsize() and early debugging. */ TUNABLE_INT_FETCH("debug.late_console", &late_console); if (!late_console) { cninit(); amd64_kdb_init(); } getmemsize(kmdp, physfree); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ #ifdef DEV_PCI /* This call might adjust phys_avail[]. */ pci_early_quirks(); #endif if (late_console) cninit(); /* * Dump the boot metadata. We have to wait for cninit() since console * output is required. If it's grossly incorrect the kernel will never * make it this far. */ if (getenv_is_true("debug.dump_modinfo_at_boot")) preload_dump(); #ifdef DEV_ISA #ifdef DEV_ATPIC elcr_probe(); atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); #endif #else #error "have you forgotten the isa device?" #endif if (late_console) amd64_kdb_init(); msgbufinit(msgbufp, msgbufsize); fpuinit(); /* make an initial tss so cpu can get interrupt stack on syscall! */ rsp0 = thread0.td_md.md_stack_base; /* Ensure the stack is aligned to 16 bytes */ rsp0 &= ~0xFul; PCPU_PTR(common_tss)->tss_rsp0 = rsp0; amd64_bsp_pcpu_init2(rsp0); /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); _ufssel = GSEL(GUFS32_SEL, SEL_UPL); _ugssel = GSEL(GUGS32_SEL, SEL_UPL); load_ds(_udatasel); load_es(_udatasel); load_fs(_ufssel); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; env = kern_getenv("kernelname"); if (env != NULL) strlcpy(kernelname, env, sizeof(kernelname)); kcsan_cpu_init(0); #ifdef FDT x86_init_fdt(); #endif thread0.td_critnest = 0; kasan_init(); kmsan_init(); TSEXIT(); /* Location of kernel stack for locore */ return (thread0.td_md.md_stack_base); } void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((uint32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); static int efi_map_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct efi_map_header *efihdr; caddr_t kmdp; uint32_t efisize; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); if (efihdr == NULL) return (0); efisize = *((uint32_t *)efihdr - 1); return (SYSCTL_OUT(req, efihdr, efisize)); } SYSCTL_PROC(_machdep, OID_AUTO, efi_map, CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, efi_map_sysctl_handler, "S,efi_map_header", "Raw EFI Memory Map"); void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; critical_enter(); } else td->td_md.md_spinlock_count++; } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) { critical_exit(); intr_restore(flags); } } /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_r12 = tf->tf_r12; pcb->pcb_r13 = tf->tf_r13; pcb->pcb_r14 = tf->tf_r14; pcb->pcb_r15 = tf->tf_r15; pcb->pcb_rbp = tf->tf_rbp; pcb->pcb_rbx = tf->tf_rbx; pcb->pcb_rip = tf->tf_rip; pcb->pcb_rsp = tf->tf_rsp; } /* * The pcb_flags is only modified by current thread, or by other threads * when current thread is stopped. However, current thread may change it * from the interrupt context in cpu_switch(), or in the trap handler. * When we read-modify-write pcb_flags from C sources, compiler may generate * code that is not atomic regarding the interrupt handler. If a trap or * interrupt happens and any flag is modified from the handler, it can be * clobbered with the cached value later. Therefore, we implement setting * and clearing flags with single-instruction functions, which do not race * with possible modification of the flags from the trap or interrupt context, * because traps and interrupts are executed only on instruction boundary. */ void set_pcb_flags_raw(struct pcb *pcb, const u_int flags) { __asm __volatile("orl %1,%0" : "=m" (pcb->pcb_flags) : "ir" (flags), "m" (pcb->pcb_flags) : "cc", "memory"); } /* * The support for RDFSBASE, WRFSBASE and similar instructions for %gs * base requires that kernel saves MSR_FSBASE and MSR_{K,}GSBASE into * pcb if user space modified the bases. We must save on the context * switch or if the return to usermode happens through the doreti. * * Tracking of both events is performed by the pcb flag PCB_FULL_IRET, * which have a consequence that the base MSRs must be saved each time * the PCB_FULL_IRET flag is set. We disable interrupts to sync with * context switches. */ static void set_pcb_flags_fsgsbase(struct pcb *pcb, const u_int flags) { register_t r; if (curpcb == pcb && (flags & PCB_FULL_IRET) != 0 && (pcb->pcb_flags & PCB_FULL_IRET) == 0) { r = intr_disable(); if ((pcb->pcb_flags & PCB_FULL_IRET) == 0) { if (rfs() == _ufssel) pcb->pcb_fsbase = rdfsbase(); if (rgs() == _ugssel) pcb->pcb_gsbase = rdmsr(MSR_KGSBASE); } set_pcb_flags_raw(pcb, flags); intr_restore(r); } else { set_pcb_flags_raw(pcb, flags); } } DEFINE_IFUNC(, void, set_pcb_flags, (struct pcb *, const u_int)) { return ((cpu_stdext_feature & CPUID_STDEXT_FSGSBASE) != 0 ? set_pcb_flags_fsgsbase : set_pcb_flags_raw); } void clear_pcb_flags(struct pcb *pcb, const u_int flags) { __asm __volatile("andl %1,%0" : "=m" (pcb->pcb_flags) : "ir" (~flags), "m" (pcb->pcb_flags) : "cc", "memory"); } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ #undef memset #undef memmove #undef memcpy void *memset_std(void *buf, int c, size_t len); void *memset_erms(void *buf, int c, size_t len); void *memmove_std(void * _Nonnull dst, const void * _Nonnull src, size_t len); void *memmove_erms(void * _Nonnull dst, const void * _Nonnull src, size_t len); void *memcpy_std(void * _Nonnull dst, const void * _Nonnull src, size_t len); void *memcpy_erms(void * _Nonnull dst, const void * _Nonnull src, size_t len); #ifdef KCSAN /* * These fail to build as ifuncs when used with KCSAN. */ void * memset(void *buf, int c, size_t len) { return (memset_std(buf, c, len)); } void * memmove(void * _Nonnull dst, const void * _Nonnull src, size_t len) { return (memmove_std(dst, src, len)); } void * memcpy(void * _Nonnull dst, const void * _Nonnull src, size_t len) { return (memcpy_std(dst, src, len)); } #else DEFINE_IFUNC(, void *, memset, (void *, int, size_t)) { return ((cpu_stdext_feature & CPUID_STDEXT_ERMS) != 0 ? memset_erms : memset_std); } DEFINE_IFUNC(, void *, memmove, (void * _Nonnull, const void * _Nonnull, size_t)) { return ((cpu_stdext_feature & CPUID_STDEXT_ERMS) != 0 ? memmove_erms : memmove_std); } DEFINE_IFUNC(, void *, memcpy, (void * _Nonnull, const void * _Nonnull,size_t)) { return ((cpu_stdext_feature & CPUID_STDEXT_ERMS) != 0 ? memcpy_erms : memcpy_std); } #endif void pagezero_std(void *addr); void pagezero_erms(void *addr); DEFINE_IFUNC(, void , pagezero, (void *)) { return ((cpu_stdext_feature & CPUID_STDEXT_ERMS) != 0 ? pagezero_erms : pagezero_std); } diff --git a/sys/amd64/conf/NOTES b/sys/amd64/conf/NOTES index ba6e99c0f8eb..42cc23d076b9 100644 --- a/sys/amd64/conf/NOTES +++ b/sys/amd64/conf/NOTES @@ -1,669 +1,664 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # $FreeBSD$ # # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # DTrace core # NOTE: introduces CDDL-licensed components into the kernel #device dtrace # DTrace modules #device dtrace_profile #device dtrace_sdt #device dtrace_fbt #device dtrace_systrace #device dtrace_prototype #device dtnfscl #device dtmalloc # Alternatively include all the DTrace modules #device dtraceall ##################################################################### # SMP OPTIONS: # # Notes: # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Optional: options IPI_PREEMPTION device atpic # Optional legacy pic support device mptable # Optional MPSPEC mptable support -# -# Watchdog routines. -# -options MP_WATCHDOG - # Debugging options. # options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu HAMMER # aka K8, aka Opteron & Athlon64 # # Options for CPU features. # ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING # BPF_JITTER adds support for BPF just-in-time compiler. options BPF_JITTER # OpenFabrics Enterprise Distribution (Infiniband). options OFED options OFED_DEBUG_INIT # Sockets Direct Protocol options SDP options SDP_DEBUG # IP over Infiniband options IPOIB options IPOIB_DEBUG options IPOIB_CM ##################################################################### # CLOCK OPTIONS # Provide read/write access to the memory in the clock chip. device nvram # Access to rtc cmos via /dev/nvram ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device speaker #Play IBM BASIC-style noises out your speaker envvar hint.speaker.0.at="isa" envvar hint.speaker.0.port="0x61" ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # AGP GART support device agp # # AGP debugging. # options AGP_DEBUG ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG device dpms # DPMS suspend & resume via VESA BIOS # x86 real mode BIOS emulator, required by atkbdc/dpms/vesa options X86BIOS # # Optional devices: # # PS/2 mouse device psm envvar hint.psm.0.at="atkbdc" envvar hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc envvar hint.atkbdc.0.at="isa" envvar hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd envvar hint.atkbd.0.at="atkbdc" envvar hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga envvar hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG # vt(4) drivers. device vt_vga # VGA device vt_efifb # EFI framebuffer device vt_vbefb # VBE framebuffer # Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA. device s3pci # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # device tdfx # Enable 3Dfx Voodoo support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). device acpi options ACPI_DEBUG # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # # Network interfaces: # # axp: AMD EPYC integrated NIC # Requires the miibus module # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # ice: Intel 800 Series Physical Function # Requires the ice_ddp module for full functionality # igc: Intel I225 2.5Gb Ethernet adapter # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # Requires the ipw firmware module # irdma: Intel 800 Series RDMA driver # Requires the ice module # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # Requires the iwi firmware module # iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn # 802.11 network adapters # Requires the iwn firmware module # mthca: Mellanox HCA InfiniBand # mlx4ib: Mellanox ConnectX HCA InfiniBand # mlx4en: Mellanox ConnectX HCA Ethernet # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # qlxgb: QLogic 3200 and 8200 series 10 Gigabit Ethernet & CNA Adapter # qlxgbe: QLogic 8300 series 10 Gigabit Ethernet & CNA Adapter # qlxge: QLogic 8100 series 10 Gigabit Ethernet & CNA Adapter # sfxge: Solarflare SFC9000 family 10Gb Ethernet adapters # vmx: VMware VMXNET3 Ethernet (BSD open source) # wpi: Intel 3945ABG Wireless LAN controller # Requires the wpi firmware module device axp # AMD EPYC integrated NIC device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device igc # Intel I225 2.5G Ethernet device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device ixl # Intel 700 Series Physical Function device iavf # Intel Adaptive Virtual Function device ice # Intel 800 Series Physical Function device ice_ddp # Intel 800 Series DDP Package device irdma # Intel 800 Series RDMA driver device mthca # Mellanox HCA InfiniBand device mlx4 # Shared code module between IB and Ethernet device mlx4ib # Mellanox ConnectX HCA InfiniBand device mlx4en # Mellanox ConnectX HCA Ethernet device nfe # nVidia nForce MCP on-board Ethernet device qlxgb # QLogic 3200/8200 Ethernet device qlxgbe # QLogic 8300 Ethernet device qlxge # QLogic 8100 Ethernet device sfxge # Solarflare SFC9000 10Gb Ethernet device vmx # VMware VMXNET3 Ethernet device wpi # Intel 3945ABG wireless NICs. # IEEE 802.11 adapter firmware modules # Intel PRO/Wireless 2100 firmware: # ipwfw: BSS/IBSS/monitor mode firmware # ipwbssfw: BSS mode firmware # ipwibssfw: IBSS mode firmware # ipwmonitorfw: Monitor mode firmware # Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware: # iwifw: BSS/IBSS/monitor mode firmware # iwibssfw: BSS mode firmware # iwiibssfw: IBSS mode firmware # iwimonitorfw: Monitor mode firmware # Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware: # iwnfw: Single module to support all devices # iwn1000fw: Specific module for the 1000 only # iwn105fw: Specific module for the 105 only # iwn135fw: Specific module for the 135 only # iwn2000fw: Specific module for the 2000 only # iwn2030fw: Specific module for the 2030 only # iwn4965fw: Specific module for the 4965 only # iwn5000fw: Specific module for the 5000 only # iwn5150fw: Specific module for the 5150 only # iwn6000fw: Specific module for the 6000 only # iwn6000g2afw: Specific module for the 6000g2a only # iwn6000g2bfw: Specific module for the 6000g2b only # iwn6050fw: Specific module for the 6050 only # wpifw: Intel 3945ABG Wireless LAN Controller firmware device iwifw device iwibssfw device iwiibssfw device iwimonitorfw device ipwfw device ipwbssfw device ipwibssfw device ipwmonitorfw device iwnfw device iwn1000fw device iwn105fw device iwn135fw device iwn2000fw device iwn2030fw device iwn4965fw device iwn5000fw device iwn5150fw device iwn6000fw device iwn6000g2afw device iwn6000g2bfw device iwn6050fw device wpifw # # Non-Transparent Bridge (NTB) drivers # device if_ntb # Virtual NTB network interface device ntb_transport # NTB packet transport driver device ntb # NTB hardware interface device ntb_hw_amd # AMD NTB hardware driver device ntb_hw_intel # Intel NTB hardware driver device ntb_hw_plx # PLX NTB hardware driver # #XXX this stores pointers in a 32bit field that is defined by the hardware #device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # Microsemi smartpqi controllers. # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device smartpqi # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Highpoint RocketRAID 27xx. device hpt27xx # # Highpoint RocketRAID 182x. device hptmv # # Highpoint DC7280 and R750. device hptnr # # Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340, # RR2210, RR174x, RR2522, RR231x, RR230x. device hptrr # # Highpoint RocketRaid 3xxx series SATA RAID device hptiop # # IBM (now Adaptec) ServeRAID controllers device ips # # Intel integrated Memory Controller (iMC) SMBus controller # Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon device imcsmb # # Intel C600 (Patsburg) integrated SAS controller device isci options ISCI_LOGGING # enable debugging in isci HAL # # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespaces as disks, depends on nvme # # Intel Volume Management Device (VMD) support device vmd # # PMC-Sierra SAS/SATA controller device pmspcv # # Intel QuickAssist driver with OpenCrypto support # # Only for legacy Atom C2XXX chipsets. device qat_c2xxx # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support # # VirtIO support # # The virtio entry provides a generic bus for use by the device drivers. # It must be combined with an interface that communicates with the host. # Multiple such interfaces are defined by the VirtIO specification. FreeBSD # only has support for PCI. Therefore, virtio_pci must be statically # compiled in or loaded as a module for the device drivers to function. # device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI Interface device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device device virtio_random # VirtIO Entropy device device virtio_console # VirtIO Console device # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # Microsoft Hyper-V enhancement support device hyperv # HyperV drivers # Xen HVM Guest Optimizations options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver device xentimer # Xen x86 PV timer device ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) # smbios: DMI/SMBIOS entry point (requires EFIRT option) # vpd: Vital Product Data kernel interface # asmc: Apple System Management Controller # si: Specialix International SI/XIO or SX intelligent serial card # tpm: Trusted Platform Module # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. device ipmi device pbio envvar hint.pbio.0.at="isa" envvar hint.pbio.0.port="0x360" device smbios device vpd device asmc device tpm device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device aesni # AES-NI OpenCrypto module device ossl # OpenSSL OpenCrypto module device ioat # Intel I/OAT DMA engine # # Laptop/Notebook options: # device backlight # # I2C Bus # # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # amdsbwd: AMD SB7xx watchdog timer # viawd: VIA south bridge watchdog timer # wbwd: Winbond watchdog timer # itwd: ITE Super I/O watchdog timer # device ichwd device amdsbwd device viawd device wbwd device itwd # # Temperature sensors: # # coretemp: on-die sensor on Intel Core and newer CPUs # amdtemp: on-die sensor on AMD K8/K10/K11 CPUs # device coretemp device amdtemp # # CPU control pseudo-device. Provides access to MSRs, CPUID info and # microcode update feature. # device cpuctl # # SuperIO driver. # device superio # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # AMD System Management Network (SMN) # device amdsmn # # Number of initial kernel page table pages used for early bootstrap. # This number should include enough pages to map the kernel and any # modules or other data loaded with the kernel by the loader. Each # page table page maps 2MB. # options NKPT=31 # EFI Runtime Services support options EFIRT # # HID-over-I2C support # device iichid # HID-over-I2C support options IICHID_DEBUG # Enable HID-over-I2C debug messages options IICHID_SAMPLING # Workaround missing GPIO INTR support ##################################################################### # ABI Emulation #XXX keep these here for now and reactivate when support for emulating #XXX these 32 bit binaries is added. # Enable 32-bit runtime support for FreeBSD/i386 binaries. options COMPAT_FREEBSD32 # Enable (32-bit) a.out binary support options COMPAT_AOUT ##################################################################### # ZFS support # NB: This depends on crypto, cryptodev and ZSTDIO options ZFS ##################################################################### # VM OPTIONS # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=5 # Enable detailed accounting by the PV entry allocator. options PV_STATS ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE # GCOV (code coverage) support options LINDEBUGFS options GCOV diff --git a/sys/amd64/include/mp_watchdog.h b/sys/amd64/include/mp_watchdog.h deleted file mode 100644 index e1fc0742ee1e..000000000000 --- a/sys/amd64/include/mp_watchdog.h +++ /dev/null @@ -1,36 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 Robert N. M. Watson - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -#ifndef _MACHINE_MP_WATCHDOG_H_ -#define _MACHINE_MP_WATCHDOG_H_ - -void ap_watchdog(u_int cpuid); - -#endif /* !_MACHINE_MP_WATCHDOG_H_ */ diff --git a/sys/conf/files.x86 b/sys/conf/files.x86 index a78570a423c9..8478afab972f 100644 --- a/sys/conf/files.x86 +++ b/sys/conf/files.x86 @@ -1,347 +1,346 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # # $FreeBSD$ # # This file contains all the x86 devices and such that are # common between i386 and amd64, but aren't applicable to # any other architecture we support. # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # atkbdmap.h optional atkbd_dflt_keymap \ compile-with "${KEYMAP} -L ${ATKBD_DFLT_KEYMAP} | ${KEYMAP_FIX} > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "atkbdmap.h" cddl/dev/fbt/x86/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}" cddl/dev/dtrace/x86/dis_tables.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}" cddl/dev/dtrace/x86/instr_size.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}" crypto/aesni/aesni.c optional aesni aesni_ghash.o optional aesni \ dependency "$S/crypto/aesni/aesni_ghash.c" \ compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} -mmmx -msse -msse4 -maes -mpclmul ${.IMPSRC}" \ no-implicit-rule \ clean "aesni_ghash.o" aesni_ccm.o optional aesni \ dependency "$S/crypto/aesni/aesni_ccm.c" \ compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} -mmmx -msse -msse4 -maes -mpclmul ${.IMPSRC}" \ no-implicit-rule \ clean "aesni_ccm.o" aesni_wrap.o optional aesni \ dependency "$S/crypto/aesni/aesni_wrap.c" \ compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} -mmmx -msse -msse4 -maes ${.IMPSRC}" \ no-implicit-rule \ clean "aesni_wrap.o" intel_sha1.o optional aesni \ dependency "$S/crypto/aesni/intel_sha1.c" \ compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} -mmmx -msse -msse4 -msha ${.IMPSRC}" \ no-implicit-rule \ clean "intel_sha1.o" intel_sha256.o optional aesni \ dependency "$S/crypto/aesni/intel_sha256.c" \ compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} -mmmx -msse -msse4 -msha ${.IMPSRC}" \ no-implicit-rule \ clean "intel_sha256.o" crypto/openssl/ossl_x86.c optional ossl crypto/via/padlock.c optional padlock crypto/via/padlock_cipher.c optional padlock crypto/via/padlock_hash.c optional padlock dev/acpica/acpi_hpet.c optional acpi dev/acpica/acpi_if.m standard dev/acpica/acpi_pci.c optional acpi pci dev/acpica/acpi_pci_link.c optional acpi pci dev/acpica/acpi_pcib.c optional acpi pci dev/acpica/acpi_pcib_acpi.c optional acpi pci dev/acpica/acpi_pcib_pci.c optional acpi pci dev/acpica/acpi_pxm.c optional acpi dev/acpica/acpi_timer.c optional acpi dev/amdsbwd/amdsbwd.c optional amdsbwd dev/amdsmn/amdsmn.c optional amdsmn | amdtemp dev/amdtemp/amdtemp.c optional amdtemp dev/arcmsr/arcmsr.c optional arcmsr pci dev/asmc/asmc.c optional asmc isa dev/atkbdc/atkbd.c optional atkbd atkbdc dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc dev/atkbdc/atkbdc.c optional atkbdc dev/atkbdc/atkbdc_isa.c optional atkbdc isa dev/atkbdc/atkbdc_subr.c optional atkbdc dev/atkbdc/psm.c optional psm atkbdc dev/bxe/bxe.c optional bxe pci dev/bxe/bxe_stats.c optional bxe pci dev/bxe/bxe_debug.c optional bxe pci dev/bxe/ecore_sp.c optional bxe pci dev/bxe/bxe_elink.c optional bxe pci dev/bxe/57710_init_values.c optional bxe pci dev/bxe/57711_init_values.c optional bxe pci dev/bxe/57712_init_values.c optional bxe pci dev/coretemp/coretemp.c optional coretemp dev/cp/cpddk.c optional cp \ compile-with "${NORMAL_C} ${NO_WMISLEADING_INDENTATION}" dev/cp/if_cp.c optional cp dev/cpuctl/cpuctl.c optional cpuctl dev/dpms/dpms.c optional dpms dev/fb/fb.c optional fb | vga dev/fb/s3_pci.c optional s3pci dev/fb/vesa.c optional vga vesa dev/fb/vga.c optional vga dev/fdc/fdc.c optional fdc dev/fdc/fdc_acpi.c optional fdc dev/fdc/fdc_isa.c optional fdc isa dev/gpio/bytgpio.c optional bytgpio dev/gpio/chvgpio.c optional chvgpio dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx dev/hpt27xx/hpt27xx_config.c optional hpt27xx dev/hpt27xx/$M-elf.hpt27xx_lib.o optional hpt27xx dev/hptmv/entry.c optional hptmv dev/hptmv/mv.c optional hptmv dev/hptmv/gui_lib.c optional hptmv dev/hptmv/hptproc.c optional hptmv dev/hptmv/ioctl.c optional hptmv dev/hptmv/$M-elf.hptmvraid.o optional hptmv dev/hptnr/hptnr_os_bsd.c optional hptnr dev/hptnr/hptnr_osm_bsd.c optional hptnr dev/hptnr/hptnr_config.c optional hptnr dev/hptnr/$M-elf.hptnr_lib.o optional hptnr dev/hptrr/hptrr_os_bsd.c optional hptrr dev/hptrr/hptrr_osm_bsd.c optional hptrr dev/hptrr/hptrr_config.c optional hptrr dev/hptrr/$M-elf.hptrr_lib.o optional hptrr dev/hwpmc/hwpmc_amd.c optional hwpmc dev/hwpmc/hwpmc_intel.c optional hwpmc dev/hwpmc/hwpmc_core.c optional hwpmc dev/hwpmc/hwpmc_uncore.c optional hwpmc dev/hwpmc/hwpmc_tsc.c optional hwpmc dev/hwpmc/hwpmc_x86.c optional hwpmc dev/hyperv/hvsock/hv_sock.c optional hyperv dev/hyperv/input/hv_kbd.c optional hyperv dev/hyperv/input/hv_kbdc.c optional hyperv dev/hyperv/pcib/vmbus_pcib.c optional hyperv pci dev/hyperv/netvsc/hn_nvs.c optional hyperv dev/hyperv/netvsc/hn_rndis.c optional hyperv dev/hyperv/netvsc/if_hn.c optional hyperv dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c optional hyperv dev/hyperv/utilities/hv_kvp.c optional hyperv dev/hyperv/utilities/hv_snapshot.c optional hyperv dev/hyperv/utilities/vmbus_heartbeat.c optional hyperv dev/hyperv/utilities/vmbus_ic.c optional hyperv dev/hyperv/utilities/vmbus_shutdown.c optional hyperv dev/hyperv/utilities/vmbus_timesync.c optional hyperv dev/hyperv/vmbus/hyperv.c optional hyperv dev/hyperv/vmbus/hyperv_busdma.c optional hyperv dev/hyperv/vmbus/vmbus.c optional hyperv pci dev/hyperv/vmbus/vmbus_br.c optional hyperv dev/hyperv/vmbus/vmbus_chan.c optional hyperv dev/hyperv/vmbus/vmbus_et.c optional hyperv dev/hyperv/vmbus/vmbus_if.m optional hyperv dev/hyperv/vmbus/vmbus_res.c optional hyperv dev/hyperv/vmbus/vmbus_xact.c optional hyperv dev/ichwd/ichwd.c optional ichwd dev/imcsmb/imcsmb.c optional imcsmb dev/imcsmb/imcsmb_pci.c optional imcsmb pci dev/intel/pchtherm.c optional pchtherm dev/intel/spi.c optional intelspi dev/io/iodev.c optional io dev/iommu/busdma_iommu.c optional acpi iommu pci dev/iommu/iommu_gas.c optional acpi iommu pci dev/ipmi/ipmi.c optional ipmi dev/ipmi/ipmi_acpi.c optional ipmi acpi dev/ipmi/ipmi_isa.c optional ipmi isa dev/ipmi/ipmi_kcs.c optional ipmi dev/ipmi/ipmi_smic.c optional ipmi dev/ipmi/ipmi_smbus.c optional ipmi smbus dev/ipmi/ipmi_smbios.c optional ipmi dev/ipmi/ipmi_ssif.c optional ipmi smbus dev/ipmi/ipmi_pci.c optional ipmi pci dev/isci/isci.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/isci_controller.c optional isci dev/isci/isci_domain.c optional isci dev/isci/isci_interrupt.c optional isci dev/isci/isci_io_request.c optional isci dev/isci/isci_logger.c optional isci dev/isci/isci_oem_parameters.c optional isci dev/isci/isci_remote_device.c optional isci dev/isci/isci_sysctl.c optional isci dev/isci/isci_task_request.c optional isci dev/isci/isci_timer.c optional isci dev/isci/scil/sati.c optional isci dev/isci/scil/sati_abort_task_set.c optional isci dev/isci/scil/sati_atapi.c optional isci dev/isci/scil/sati_device.c optional isci dev/isci/scil/sati_inquiry.c optional isci dev/isci/scil/sati_log_sense.c optional isci dev/isci/scil/sati_lun_reset.c optional isci dev/isci/scil/sati_mode_pages.c optional isci dev/isci/scil/sati_mode_select.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/sati_mode_sense.c optional isci dev/isci/scil/sati_mode_sense_10.c optional isci dev/isci/scil/sati_mode_sense_6.c optional isci dev/isci/scil/sati_move.c optional isci dev/isci/scil/sati_passthrough.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/sati_read.c optional isci dev/isci/scil/sati_read_buffer.c optional isci dev/isci/scil/sati_read_capacity.c optional isci dev/isci/scil/sati_reassign_blocks.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/sati_report_luns.c optional isci dev/isci/scil/sati_request_sense.c optional isci dev/isci/scil/sati_start_stop_unit.c optional isci dev/isci/scil/sati_synchronize_cache.c optional isci dev/isci/scil/sati_test_unit_ready.c optional isci dev/isci/scil/sati_unmap.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/sati_util.c optional isci dev/isci/scil/sati_verify.c optional isci dev/isci/scil/sati_write.c optional isci dev/isci/scil/sati_write_and_verify.c optional isci dev/isci/scil/sati_write_buffer.c optional isci dev/isci/scil/sati_write_long.c optional isci dev/isci/scil/sci_abstract_list.c optional isci dev/isci/scil/sci_base_controller.c optional isci dev/isci/scil/sci_base_domain.c optional isci dev/isci/scil/sci_base_iterator.c optional isci dev/isci/scil/sci_base_library.c optional isci dev/isci/scil/sci_base_logger.c optional isci dev/isci/scil/sci_base_memory_descriptor_list.c optional isci dev/isci/scil/sci_base_memory_descriptor_list_decorator.c optional isci dev/isci/scil/sci_base_object.c optional isci dev/isci/scil/sci_base_observer.c optional isci dev/isci/scil/sci_base_phy.c optional isci dev/isci/scil/sci_base_port.c optional isci dev/isci/scil/sci_base_remote_device.c optional isci dev/isci/scil/sci_base_request.c optional isci dev/isci/scil/sci_base_state_machine.c optional isci dev/isci/scil/sci_base_state_machine_logger.c optional isci dev/isci/scil/sci_base_state_machine_observer.c optional isci dev/isci/scil/sci_base_subject.c optional isci dev/isci/scil/sci_util.c optional isci dev/isci/scil/scic_sds_controller.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scic_sds_library.c optional isci dev/isci/scil/scic_sds_pci.c optional isci dev/isci/scil/scic_sds_phy.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scic_sds_port.c optional isci dev/isci/scil/scic_sds_port_configuration_agent.c optional isci dev/isci/scil/scic_sds_remote_device.c optional isci dev/isci/scil/scic_sds_remote_node_context.c optional isci dev/isci/scil/scic_sds_remote_node_table.c optional isci dev/isci/scil/scic_sds_request.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scic_sds_sgpio.c optional isci dev/isci/scil/scic_sds_smp_remote_device.c optional isci dev/isci/scil/scic_sds_smp_request.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scic_sds_ssp_request.c optional isci dev/isci/scil/scic_sds_stp_packet_request.c optional isci dev/isci/scil/scic_sds_stp_remote_device.c optional isci dev/isci/scil/scic_sds_stp_request.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scic_sds_unsolicited_frame_control.c optional isci dev/isci/scil/scif_sas_controller.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scif_sas_controller_state_handlers.c optional isci dev/isci/scil/scif_sas_controller_states.c optional isci dev/isci/scil/scif_sas_domain.c optional isci dev/isci/scil/scif_sas_domain_state_handlers.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scif_sas_domain_states.c optional isci dev/isci/scil/scif_sas_high_priority_request_queue.c optional isci dev/isci/scil/scif_sas_internal_io_request.c optional isci dev/isci/scil/scif_sas_io_request.c optional isci dev/isci/scil/scif_sas_io_request_state_handlers.c optional isci dev/isci/scil/scif_sas_io_request_states.c optional isci dev/isci/scil/scif_sas_library.c optional isci dev/isci/scil/scif_sas_remote_device.c optional isci dev/isci/scil/scif_sas_remote_device_ready_substate_handlers.c optional isci dev/isci/scil/scif_sas_remote_device_ready_substates.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scif_sas_remote_device_starting_substate_handlers.c optional isci dev/isci/scil/scif_sas_remote_device_starting_substates.c optional isci dev/isci/scil/scif_sas_remote_device_state_handlers.c optional isci dev/isci/scil/scif_sas_remote_device_states.c optional isci dev/isci/scil/scif_sas_request.c optional isci dev/isci/scil/scif_sas_smp_activity_clear_affiliation.c optional isci dev/isci/scil/scif_sas_smp_io_request.c optional isci dev/isci/scil/scif_sas_smp_phy.c optional isci dev/isci/scil/scif_sas_smp_remote_device.c optional isci \ compile-with "${NORMAL_C} ${NO_WUNUSED_BUT_SET_VARIABLE}" dev/isci/scil/scif_sas_stp_io_request.c optional isci dev/isci/scil/scif_sas_stp_remote_device.c optional isci dev/isci/scil/scif_sas_stp_task_request.c optional isci dev/isci/scil/scif_sas_task_request.c optional isci dev/isci/scil/scif_sas_task_request_state_handlers.c optional isci dev/isci/scil/scif_sas_task_request_states.c optional isci dev/isci/scil/scif_sas_timer.c optional isci dev/itwd/itwd.c optional itwd dev/kvm_clock/kvm_clock.c optional kvm_clock dev/mana/gdma_main.c optional mana dev/mana/mana_en.c optional mana dev/mana/mana_sysctl.c optional mana dev/mana/shm_channel.c optional mana dev/mana/hw_channel.c optional mana dev/mana/gdma_util.c optional mana dev/qat_c2xxx/qat.c optional qat_c2xxx dev/qat_c2xxx/qat_ae.c optional qat_c2xxx dev/qat_c2xxx/qat_c2xxx.c optional qat_c2xxx dev/qat_c2xxx/qat_hw15.c optional qat_c2xxx libkern/x86/crc32_sse42.c standard # # x86 shared code between IA32 and AMD64 architectures # x86/acpica/OsdEnvironment.c optional acpi x86/acpica/acpi_apm.c optional acpi x86/acpica/srat.c optional acpi x86/bios/vpd.c optional vpd x86/cpufreq/est.c optional cpufreq x86/cpufreq/hwpstate_amd.c optional cpufreq x86/cpufreq/hwpstate_intel.c optional cpufreq x86/cpufreq/p4tcc.c optional cpufreq x86/cpufreq/powernow.c optional cpufreq x86/iommu/intel_ctx.c optional acpi iommu pci x86/iommu/intel_drv.c optional acpi iommu pci x86/iommu/intel_fault.c optional acpi iommu pci x86/iommu/intel_idpgtbl.c optional acpi iommu pci x86/iommu/intel_intrmap.c optional acpi iommu pci x86/iommu/intel_qi.c optional acpi iommu pci x86/iommu/intel_quirks.c optional acpi iommu pci x86/iommu/intel_utils.c optional acpi iommu pci x86/isa/atrtc.c standard x86/isa/clock.c standard x86/isa/isa.c optional isa x86/isa/isa_dma.c optional isa x86/isa/nmi.c standard x86/isa/orm.c optional isa x86/pci/pci_bus.c optional pci x86/pci/qpi.c optional pci x86/x86/autoconf.c standard x86/x86/bus_machdep.c standard x86/x86/busdma_bounce.c standard x86/x86/busdma_machdep.c standard x86/x86/cpu_machdep.c standard x86/x86/dbreg.c optional ddb | gdb x86/x86/dump_machdep.c standard x86/x86/fdt_machdep.c optional fdt x86/x86/identcpu.c standard x86/x86/intr_machdep.c standard x86/x86/legacy.c standard x86/x86/mca.c standard x86/x86/x86_mem.c optional mem x86/x86/mp_x86.c optional smp -x86/x86/mp_watchdog.c optional mp_watchdog smp x86/x86/nexus.c standard x86/x86/pvclock.c optional kvm_clock | xenhvm x86/x86/stack_machdep.c optional ddb | stack x86/x86/tsc.c standard x86/x86/ucode.c standard x86/x86/delay.c standard x86/xen/hvm.c optional xenhvm x86/xen/xen_intr.c optional xenhvm x86/xen/xen_apic.c optional xenhvm smp diff --git a/sys/conf/options.amd64 b/sys/conf/options.amd64 index bc809553f841..8b98aa405953 100644 --- a/sys/conf/options.amd64 +++ b/sys/conf/options.amd64 @@ -1,63 +1,62 @@ # $FreeBSD$ # Options specific to AMD64 platform kernels AUTO_EOI_1 opt_auto_eoi.h AUTO_EOI_2 opt_auto_eoi.h BHYVE_SNAPSHOT COUNT_XINVLTLB_HITS opt_smp.h COUNT_IPIS opt_smp.h MAXMEM MPTABLE_FORCE_HTT -MP_WATCHDOG NKPT opt_pmap.h PV_STATS opt_pmap.h # Options for emulators. These should only be used at config time, so # they are handled like options for static filesystems # (see src/sys/conf/options), except for broken debugging options. COMPAT_AOUT opt_dontuse.h COMPAT_FREEBSD32 opt_global.h #COMPAT_LINUX opt_dontuse.h COMPAT_LINUX32 opt_dontuse.h LINPROCFS opt_dontuse.h LINSYSFS opt_dontuse.h TIMER_FREQ opt_clock.h VGA_ALT_SEQACCESS opt_vga.h VGA_DEBUG opt_vga.h VGA_NO_FONT_LOADING opt_vga.h VGA_NO_MODE_CHANGE opt_vga.h VGA_SLOW_IOACCESS opt_vga.h VGA_WIDTH90 opt_vga.h VESA VESA_DEBUG opt_vesa.h # AGP debugging support AGP_DEBUG opt_agp.h ATKBD_DFLT_KEYMAP opt_atkbd.h # iWARP client interface support in ixl IXL_IW opt_ixl.h # ------------------------------- # EOF # ------------------------------- HAMMER opt_cpu.h PSM_HOOKRESUME opt_psm.h PSM_RESETAFTERSUSPEND opt_psm.h PSM_DEBUG opt_psm.h DEV_ATPIC opt_atpic.h # BPF just-in-time compiler BPF_JITTER opt_bpf.h XENHVM opt_global.h # options for the Intel C600 SAS driver (isci) ISCI_LOGGING opt_isci.h # EFI Runtime services support EFIRT opt_efirt.h diff --git a/sys/conf/options.i386 b/sys/conf/options.i386 index 37b112e1e6e9..f65592653a82 100644 --- a/sys/conf/options.i386 +++ b/sys/conf/options.i386 @@ -1,107 +1,106 @@ # $FreeBSD$ # Options specific to the i386 platform kernels AUTO_EOI_1 opt_auto_eoi.h AUTO_EOI_2 opt_auto_eoi.h BROKEN_KEYBOARD_RESET opt_reset.h COUNT_XINVLTLB_HITS opt_smp.h COUNT_IPIS opt_smp.h DISABLE_PG_G opt_pmap.h DISABLE_PSE opt_pmap.h MAXMEM MPTABLE_FORCE_HTT -MP_WATCHDOG NKPT opt_pmap.h PERFMON PMAP_SHPGPERPROC opt_pmap.h POWERFAIL_NMI opt_trap.h PV_STATS opt_pmap.h # Options for emulators. These should only be used at config time, so # they are handled like options for static filesystems # (see src/sys/conf/options), except for broken debugging options. COMPAT_AOUT opt_dontuse.h COMPAT_LINUX opt_dontuse.h LINPROCFS opt_dontuse.h LINSYSFS opt_dontuse.h # Change KVM size. Changes things all over the kernel. KVA_PAGES opt_global.h # Physical address extensions and support for >4G ram. As above. PAE opt_global.h TIMER_FREQ opt_clock.h CPU_ATHLON_SSE_HACK opt_cpu.h CPU_BLUELIGHTNING_3X opt_cpu.h CPU_BLUELIGHTNING_FPU_OP_CACHE opt_cpu.h CPU_BTB_EN opt_cpu.h CPU_CYRIX_NO_LOCK opt_cpu.h CPU_DIRECT_MAPPED_CACHE opt_cpu.h CPU_DISABLE_5X86_LSSER opt_cpu.h CPU_ELAN opt_cpu.h CPU_ELAN_PPS opt_cpu.h CPU_ELAN_XTAL opt_cpu.h CPU_ENABLE_LONGRUN opt_cpu.h CPU_FASTER_5X86_FPU opt_cpu.h CPU_GEODE opt_cpu.h CPU_I486_ON_386 opt_cpu.h CPU_IORT opt_cpu.h CPU_L2_LATENCY opt_cpu.h CPU_LOOP_EN opt_cpu.h CPU_PPRO2CELERON opt_cpu.h CPU_RSTK_EN opt_cpu.h CPU_SOEKRIS opt_cpu.h CPU_SUSP_HLT opt_cpu.h CPU_UPGRADE_HW_CACHE opt_cpu.h CPU_WT_ALLOC opt_cpu.h CYRIX_CACHE_REALLY_WORKS opt_cpu.h CYRIX_CACHE_WORKS opt_cpu.h NO_F00F_HACK opt_cpu.h NO_MEMORY_HOLE opt_cpu.h # The CPU type affects the endian conversion functions all over the kernel. I486_CPU opt_global.h I586_CPU opt_global.h I686_CPU opt_global.h VGA_ALT_SEQACCESS opt_vga.h VGA_DEBUG opt_vga.h VGA_NO_FONT_LOADING opt_vga.h VGA_NO_MODE_CHANGE opt_vga.h VGA_SLOW_IOACCESS opt_vga.h VGA_WIDTH90 opt_vga.h VESA VESA_DEBUG opt_vesa.h # AGP debugging support AGP_DEBUG opt_agp.h PSM_DEBUG opt_psm.h PSM_HOOKRESUME opt_psm.h PSM_RESETAFTERSUSPEND opt_psm.h ATKBD_DFLT_KEYMAP opt_atkbd.h # Video spigot SPIGOT_UNSECURE opt_spigot.h # Device options DEV_APIC opt_apic.h DEV_ATPIC opt_atpic.h # Debugging NPX_DEBUG opt_npx.h # BPF just-in-time compiler BPF_JITTER opt_bpf.h # Hyper-V support HYPERV opt_hyperv.h XENHVM opt_global.h # options for the Intel C600 SAS driver (isci) ISCI_LOGGING opt_isci.h diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index 42aafcecd97b..882b755db67a 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -1,893 +1,888 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # $FreeBSD$ # # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # DTrace core # NOTE: introduces CDDL-licensed components into the kernel #device dtrace # DTrace modules #device dtrace_profile #device dtrace_sdt #device dtrace_fbt #device dtrace_systrace #device dtrace_prototype #device dtnfscl #device dtmalloc # Alternatively include all the DTrace modules #device dtraceall ##################################################################### # SMP OPTIONS: # # The apic device enables the use of the I/O APIC for interrupt delivery. # The apic device can be used in both UP and SMP kernels, but is required # for SMP kernels. Thus, the apic device is not strictly an SMP option, # but it is a prerequisite for SMP. # # Notes: # # HTT CPUs should only be used if they are enabled in the BIOS. For # the ACPI case, ACPI only correctly tells us about any HTT CPUs if # they are enabled. However, most HTT systems do not list HTT CPUs # in the MP Table if they are enabled, thus we guess at the HTT CPUs # for the MP Table case. However, we shouldn't try to guess and use # these CPUs if HTT is disabled. Thus, HTT guessing is only enabled # for the MP Table if the user explicitly asks for it via the # MPTABLE_FORCE_HTT option. Do NOT use this option if you have HTT # disabled in your BIOS. # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Mandatory: device apic # I/O apic # Optional: options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table options IPI_PREEMPTION -# -# Watchdog routines. -# -options MP_WATCHDOG - # Debugging options. # options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu I486_CPU cpu I586_CPU # aka Pentium(tm) cpu I686_CPU # aka Pentium Pro(tm) # # Options for CPU features. # # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has # forgotten to enable them. # # CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning # CPU if CPU supports it. The default is double-clock mode on # BlueLightning CPU box. # # CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM # BlueLightning CPU. It works only with Cyrix FPU, and this option # should not be used with Intel FPU. # # CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). # # CPU_CYRIX_NO_LOCK enables weak locking for the entire address space # of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. # Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) # # CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct # mapped mode. Default is 2-way set associative mode. # # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables # reorder). This option should not be used if you use memory mapped # I/O device(s). # # CPU_ELAN enables support for AMDs ElanSC520 CPU. # CPU_ELAN_PPS enables precision timestamp code. # CPU_ELAN_XTAL sets the clock crystal frequency in Hz. # # CPU_ENABLE_LONGRUN enables support for Transmeta Crusoe LongRun # technology which allows to restrict power consumption of the CPU by # using group of hw.crusoe.* sysctls. # # CPU_FASTER_5X86_FPU enables faster FPU exception handler. # # CPU_GEODE is for the SC1100 Geode embedded processor. This option # is necessary because the i8254 timecounter is toast. # # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products # for i386 machines. # # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively # (no clock delay). # # CPU_L2_LATENCY specifies the L2 cache latency value. This option is used # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. # The default value is 5. # # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE # 1). # # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option # is useful when you use Socket 8 to Socket 370 converter, because most Pentium # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. # # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). # # CPU_SOEKRIS enables support www.soekris.com hardware. # # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU # enters suspend mode following execution of HALT instruction. # # CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). # # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD # K5/K6/K6-2 CPUs. # # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache # flush at hold state. # # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs # without cache flush at hold state, and (2) write-back CPU cache on # Cyrix 6x86 whose revision < 2.7 (NOTE 2). # # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is # executed. This option is only needed if I586_CPU is also defined, # and should be included for any non-Pentium CPU that defines it. # # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors # which indicates that the 15-16MB range is *definitely* not being # occupied by an ISA memory hole. # # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. # These options may crash your system. # # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled # in write-through mode when revision < 2.7. If revision of Cyrix # 6x86 >= 2.7, CPU cache is always enabled in write-back mode. # # NOTE 3: This option may cause failures for software that requires # locked cycles in order to operate correctly. # options CPU_ATHLON_SSE_HACK options CPU_BLUELIGHTNING_3X options CPU_BLUELIGHTNING_FPU_OP_CACHE options CPU_BTB_EN options CPU_DIRECT_MAPPED_CACHE options CPU_DISABLE_5X86_LSSER options CPU_ELAN options CPU_ELAN_PPS options CPU_ELAN_XTAL=32768000 options CPU_ENABLE_LONGRUN options CPU_FASTER_5X86_FPU options CPU_GEODE options CPU_I486_ON_386 options CPU_IORT options CPU_L2_LATENCY=5 options CPU_LOOP_EN options CPU_PPRO2CELERON options CPU_RSTK_EN options CPU_SOEKRIS options CPU_SUSP_HLT options CPU_UPGRADE_HW_CACHE options CPU_WT_ALLOC options CYRIX_CACHE_WORKS options CYRIX_CACHE_REALLY_WORKS #options NO_F00F_HACK # Debug options options NPX_DEBUG # enable npx debugging # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING # BPF_JITTER adds support for BPF just-in-time compiler. options BPF_JITTER # OpenFabrics Enterprise Distribution (Infiniband). options OFED options OFED_DEBUG_INIT # Sockets Direct Protocol options SDP options SDP_DEBUG # IP over Infiniband options IPOIB options IPOIB_DEBUG options IPOIB_CM ##################################################################### # CLOCK OPTIONS # Provide read/write access to the memory in the clock chip. device nvram # Access to rtc cmos via /dev/nvram ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device speaker #Play IBM BASIC-style noises out your speaker envvar hint.speaker.0.at="isa" envvar hint.speaker.0.port="0x61" ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # AGP GART support device agp # AGP debugging. options AGP_DEBUG ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG device dpms # DPMS suspend & resume via VESA BIOS # x86 real mode BIOS emulator, required by atkbdc/dpms/vesa options X86BIOS # # Hints for the non-optional Numeric Processing eXtension driver. envvar hint.npx.0.flags="0x0" envvar hint.npx.0.irq="13" # # `flags' for npx0: # 0x01 don't use the npx registers to optimize bcopy. # 0x02 don't use the npx registers to optimize bzero. # 0x04 don't use the npx registers to optimize copyin or copyout. # The npx registers are normally used to optimize copying and zeroing when # all of the following conditions are satisfied: # I586_CPU is an option # the cpu is an i586 (perhaps not a Pentium) # the probe for npx0 succeeds # INT 16 exception handling works. # Then copying and zeroing using the npx registers is normally 30-100% faster. # The flags can be used to control cases where it doesn't work or is slower. # Setting them at boot time using hints works right (the optimizations # are not used until later in the bootstrap when npx0 is attached). # Flag 0x08 automatically disables the i586 optimized routines. # # # Optional devices: # # PS/2 mouse device psm envvar hint.psm.0.at="atkbdc" envvar hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc envvar hint.atkbdc.0.at="isa" envvar hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd envvar hint.atkbd.0.at="atkbdc" envvar hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga envvar hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG # vt(4) drivers. device vt_vga device vt_vbefb # Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA. device s3pci # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # # To enable Linuxulator support, one must also load linux.ko and tdfx_linux.ko. device tdfx # Enable 3Dfx Voodoo support options IOMMU # Enable IOMMU support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). device acpi options ACPI_DEBUG # ACPI WMI Mapping driver device acpi_wmi # ACPI Asus Extras (LCD backlight/brightness, video output, etc.) device acpi_asus # ACPI Fujitsu Extras (Buttons) device acpi_fujitsu # ACPI extras driver for HP laptops device acpi_hp # ACPI extras driver for IBM laptops device acpi_ibm # ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.) device acpi_panasonic # ACPI Sony extra (LCD brightness) device acpi_sony # ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.) device acpi_toshiba # ACPI Video Extensions (LCD backlight/brightness, video output, etc.) device acpi_video # ACPI Docking Station device acpi_dock # ACPI ASOC ATK0110 ASUSTeK AI Booster (voltage, temperature and fan sensors) device aibs # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # # Network interfaces: # # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor # with 32 HDLC subchannels, requires NETGRAPH # igc: Intel I225 2.5G Ethernet adapter # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # Requires the iwi firmware module # iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn # 802.11 network adapters # Requires the iwn firmware module # mthca: Mellanox HCA InfiniBand # mlx4ib: Mellanox ConnectX HCA InfiniBand # mlx4en: Mellanox ConnectX HCA Ethernet # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # sbni: Granch SBNI12-xx ISA and PCI adapters # vmx: VMware VMXNET3 Ethernet (BSD open source) # wpi: Intel 3945ABG Wireless LAN controller # Requires the wpi firmware module # Order for ISA/EISA devices is important here device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device ce envvar hint.cs.0.at="isa" envvar hint.cs.0.port="0x300" envvar hint.ed.0.at="isa" envvar hint.ed.0.port="0x280" envvar hint.ed.0.irq="5" envvar hint.ed.0.maddr="0xd8000" device igc # Intel I225 2.5G Ethernet device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. # Hint for the i386-only ISA front-end of le(4). envvar hint.le.0.at="isa" envvar hint.le.0.port="0x280" envvar hint.le.0.irq="10" envvar hint.le.0.drq="0" device mthca # Mellanox HCA InfiniBand device mlx4 # Shared code module between IB and Ethernet device mlx4ib # Mellanox ConnectX HCA InfiniBand device mlx4en # Mellanox ConnectX HCA Ethernet device nfe # nVidia nForce MCP on-board Ethernet device sbni envvar hint.sbni.0.at="isa" envvar hint.sbni.0.port="0x210" envvar hint.sbni.0.irq="0xefdead" envvar hint.sbni.0.flags="0" device vmx # VMware VMXNET3 Ethernet device wpi # Intel 3945ABG wireless NICs. # IEEE 802.11 adapter firmware modules # Intel PRO/Wireless 2100 firmware: # ipwfw: BSS/IBSS/monitor mode firmware # ipwbssfw: BSS mode firmware # ipwibssfw: IBSS mode firmware # ipwmonitorfw: Monitor mode firmware # Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware: # iwifw: BSS/IBSS/monitor mode firmware # iwibssfw: BSS mode firmware # iwiibssfw: IBSS mode firmware # iwimonitorfw: Monitor mode firmware # Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware: # iwnfw: Single module to support all devices # iwn1000fw: Specific module for the 1000 only # iwn105fw: Specific module for the 105 only # iwn135fw: Specific module for the 135 only # iwn2000fw: Specific module for the 2000 only # iwn2030fw: Specific module for the 2030 only # iwn4965fw: Specific module for the 4965 only # iwn5000fw: Specific module for the 5000 only # iwn5150fw: Specific module for the 5150 only # iwn6000fw: Specific module for the 6000 only # iwn6000g2afw: Specific module for the 6000g2a only # iwn6000g2bfw: Specific module for the 6000g2b only # iwn6050fw: Specific module for the 6050 only # wpifw: Intel 3945ABG Wireless LAN Controller firmware device iwifw device iwibssfw device iwiibssfw device iwimonitorfw device ipwfw device ipwbssfw device ipwibssfw device ipwmonitorfw device iwnfw device iwn1000fw device iwn105fw device iwn135fw device iwn2000fw device iwn2030fw device iwn4965fw device iwn5000fw device iwn5150fw device iwn6000fw device iwn6000g2afw device iwn6000g2bfw device iwn6050fw device wpifw # # Non-Transparent Bridge (NTB) drivers # device if_ntb # Virtual NTB network interface device ntb_transport # NTB packet transport driver device ntb # NTB hardware interface device ntb_hw_amd # AMD NTB hardware driver device ntb_hw_intel # Intel NTB hardware driver device ntb_hw_plx # PLX NTB hardware driver # # ATA raid adapters # device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Adaptec by PMC RAID controllers, Series 6/7/8 and upcoming families device aacraid # Container interface, CAM required # # Highpoint RocketRAID 27xx. device hpt27xx # # Highpoint RocketRAID 182x. device hptmv # # Highpoint DC7280 and R750. device hptnr # # Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340, # RR2210, RR174x, RR2522, RR231x, RR230x. device hptrr # # Highpoint RocketRaid 3xxx series SATA RAID device hptiop # # Intel integrated Memory Controller (iMC) SMBus controller # Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon device imcsmb # # IBM (now Adaptec) ServeRAID controllers device ips # # Intel C600 (Patsburg) integrated SAS controller device isci options ISCI_LOGGING # enable debugging in isci HAL # # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespaces as disks, depends on nvme # # Intel Volume Management Device (VMD) support device vmd # # PMC-Sierra SAS/SATA controller device pmspcv # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support # # glxiic is an I2C driver for the AMD Geode LX CS5536 System Management Bus # controller. Requires 'device iicbus'. # device glxiic # AMD Geode LX CS5536 System Management Bus # # glxsb is a driver for the Security Block in AMD Geode LX processors. # Requires 'device crypto'. # device glxsb # AMD Geode LX Security Block # # VirtIO support # # The virtio entry provides a generic bus for use by the device drivers. # It must be combined with an interface that communicates with the host. # Multiple such interfaces defined by the VirtIO specification. FreeBSD # only has support for PCI. Therefore, virtio_pci must be statically # compiled in or loaded as a module for the device drivers to function. # device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI Interface device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device device virtio_random # VirtIO Entropy device device virtio_console # VirtIO Console device # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver options HYPERV device hyperv # HyperV drivers ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # smapi: System Management Application Program Interface driver # smbios: DMI/SMBIOS entry point # vpd: Vital Product Data kernel interface # pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) # asmc: Apple System Management Controller # si: Specialix International SI/XIO or SX intelligent serial card driver # tpm: Trusted Platform Module # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. # Notes on the Sony Programmable I/O controller # This is a temporary driver that should someday be replaced by something # that hooks into the ACPI layer. The device is hooked to the PIIX4's # General Device 10 decoder, which means you have to fiddle with PCI # registers to map it in, even though it is otherwise treated here as # an ISA device. At the moment, the driver polls, although the device # is capable of generating interrupts. It largely undocumented. # The port location in the hint is where you WANT the device to be # mapped. 0x10a0 seems to be traditional. At the moment the jogdial # is the only thing truly supported, but apparently a fair percentage # of the Vaio extra features are controlled by this device. device ipmi device smapi device smbios device vpd device pbio envvar hint.pbio.0.at="isa" envvar hint.pbio.0.port="0x360" device asmc device tpm device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device aesni # AES-NI OpenCrypto module device ossl # OpenSSL OpenCrypto module # # Laptop/Notebook options: # # See also: # apm under `Miscellaneous hardware' # above. device backlight # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing # # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller # device pcf envvar hint.pcf.0.at="isa" envvar hint.pcf.0.port="0x320" envvar hint.pcf.0.irq="5" # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # amdsbwd: AMD SB7xx watchdog timer # viawd: VIA south bridge watchdog timer # wbwd: Winbond watchdog timer # itwd: ITE Super I/O watchdog timer # device ichwd device amdsbwd device viawd device wbwd device itwd # # Temperature sensors: # # coretemp: on-die sensor on Intel Core and newer CPUs # amdtemp: on-die sensor on AMD K8/K10/K11 CPUs # device coretemp device amdtemp # # CPU control pseudo-device. Provides access to MSRs, CPUID info and # microcode update feature. # device cpuctl # # SuperIO driver. # device superio # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # Set the number of PV entries per process. Increasing this can # stop panics related to heavy use of shared memory. However, that can # (combined with large amounts of physical memory) cause panics at # boot time due the kernel running out of VM space. # # If you're tweaking this, you might also want to increase the sysctls # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". # # The value below is the one more than the default. # options PMAP_SHPGPERPROC=201 # # Number of initial kernel page table pages used for early bootstrap. # This number should include enough pages to map the kernel, any # modules or other data loaded with the kernel by the loader, and data # structures allocated before the VM system is initialized such as the # vm_page_t array. Each page table page maps 4MB (2MB with PAE). # options NKPT=31 # # HID-over-I2C support # device iichid # HID-over-I2C support options IICHID_DEBUG # Enable HID-over-I2C debug messages options IICHID_SAMPLING # Workaround missing GPIO INTR support ##################################################################### # ABI Emulation # Enable (32-bit) a.out binary support options COMPAT_AOUT ##################################################################### # VM OPTIONS # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=5 # Enable detailed accounting by the PV entry allocator. options PV_STATS ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE diff --git a/sys/i386/i386/machdep.c b/sys/i386/i386/machdep.c index 5bec6196ba27..41759c07e3d3 100644 --- a/sys/i386/i386/machdep.c +++ b/sys/i386/i386/machdep.c @@ -1,1875 +1,1873 @@ /*- * SPDX-License-Identifier: BSD-4-Clause * * Copyright (c) 2018 The FreeBSD Foundation * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Portions of this software were developed by A. Joseph Koshy under * sponsorship from the FreeBSD Foundation and Google, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_apic.h" #include "opt_atpic.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" -#include "opt_mp_watchdog.h" #include "opt_perfmon.h" #include "opt_platform.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #include #include #include #include #include #include #include #include #include #include -#include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_APIC #include #endif #ifdef DEV_ISA #include #endif /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); register_t init386(int first); void dblfault_handler(void); void identify_cpu(void); static void cpu_startup(void *); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel; u_int basemem; static int above4g_allow = 1; static int above24g_allow = 0; int cold = 1; long Maxmem = 0; long realmem = 0; int late_console = 1; #ifdef PAE FEATURE(pae, "Physical Address Extensions"); #endif struct kva_md_info kmi; static struct trapframe proc0_tf; struct pcpu __pcpu[MAXCPU]; static void i386_clock_source_init(void); struct mtx icu_lock; struct mem_range_softc mem_range_softc; extern char start_exceptions[], end_exceptions[]; extern struct sysentvec elf32_freebsd_sysvec; /* Default init_ops implementation. */ struct init_ops init_ops = { .early_clock_source_init = i386_clock_source_init, .early_delay = i8254_delay, }; static void i386_clock_source_init(void) { i8254_init(); } static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = kern_getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = kern_getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)vm_free_count())) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)vm_free_count()), ptoa((uintmax_t)vm_free_count()) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } void cpu_setregs(void) { unsigned int cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are set for NPX (FPU) support: * * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT * instructions. We must set the CR0_MP bit and use the CR0_TS * bit to control the trap, because setting the CR0_EM bit does * not cause WAIT instructions to trap. It's important to trap * WAIT instructions - otherwise the "wait" variants of no-wait * control instructions would degenerate to the "no-wait" variants * after FP context switches but work correctly otherwise. It's * particularly important to trap WAITs when there is no NPX - * otherwise the "wait" variants would always degenerate. * * Try setting CR0_NE to get correct error reporting on 486DX's. * Setting it should fail or do nothing on lesser processors. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); load_gs(_udatasel); } u_long bootdev; /* not a struct cdev *- encoding is different */ SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev, CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)"); /* * Initialize 386 and configure to run kernel */ /* * Initialize segments & interrupt table */ int _default_ldt; struct mtx dt_lock; /* lock for GDT and LDT */ union descriptor gdt0[NGDT]; /* initial global descriptor table */ union descriptor *gdt = gdt0; /* global descriptor table */ union descriptor *ldt; /* local descriptor table */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ static struct i386tss *dblfault_tss; static char *dblfault_stack; static struct i386tss common_tss0; vm_offset_t proc0kstack; /* * software prototypes -- in more palatable form. * * GCODE_SEL through GUDATA_SEL must be in this order for syscall/sysret * GUFS_SEL and GUGS_SEL must be in this order (swtch.s knows it) */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = SEL_KPL, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPRIV_SEL 1 SMP Per-Processor Private Data Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUFS_SEL 2 %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS_SEL 3 %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 6 Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */ { .ssd_base = 0x400, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GLDT_SEL 10 LDT Descriptor */ { .ssd_base = 0, .ssd_limit = sizeof(union descriptor) * NLDT - 1, .ssd_type = SDT_SYSLDT, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 User LDT Descriptor per process */ { .ssd_base = 0, .ssd_limit = (512 * sizeof(union descriptor)-1), .ssd_type = SDT_SYSLDT, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPANIC_SEL 12 Panic Tss Descriptor */ { .ssd_base = 0, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GBIOSCODE32_SEL 13 BIOS 32-bit interface (32bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSCODE16_SEL 14 BIOS 32-bit interface (16bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSDATA_SEL 15 BIOS 32-bit interface (Data) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSUTIL_SEL 16 BIOS 16-bit interface (Utility) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSARGS_SEL 17 BIOS 16-bit interface (Arguments) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GNDIS_SEL 18 NDIS Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, }; static struct soft_segment_descriptor ldt_segs[] = { /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, }; size_t setidt_disp; void setidt(int idx, inthand_t *func, int typ, int dpl, int selec) { uintptr_t off; off = func != NULL ? (uintptr_t)func + setidt_disp : 0; setidt_nodisp(idx, off, typ, dpl, selec); } void setidt_nodisp(int idx, uintptr_t off, int typ, int dpl, int selec) { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = off; ip->gd_selector = selec; ip->gd_stkcpy = 0; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((u_int)off) >> 16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), #endif IDTVEC(int0x80_syscall); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND_FLAGS(idt, db_show_idt, DB_CMD_MEMSAFE) { struct gate_descriptor *ip; int idx; uintptr_t func, func_trm; bool trm; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { if (ip->gd_type == SDT_SYSTASKGT) { db_printf("%3d\t\n", idx); } else { func = (ip->gd_hioffset << 16 | ip->gd_looffset); if (func >= PMAP_TRM_MIN_ADDRESS) { func_trm = func; func -= setidt_disp; trm = true; } else trm = false; if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); if (trm) db_printf(" (trampoline %#x)", func_trm); db_printf("\n"); } } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND_FLAGS(sysregs, db_show_sysregs, DB_CMD_MEMSAFE) { uint64_t idtr, gdtr; idtr = ridt(); db_printf("idtr\t0x%08x/%04x\n", (u_int)(idtr >> 16), (u_int)idtr & 0xffff); gdtr = rgdt(); db_printf("gdtr\t0x%08x/%04x\n", (u_int)(gdtr >> 16), (u_int)gdtr & 0xffff); db_printf("ldtr\t0x%04x\n", rldt()); db_printf("tr\t0x%04x\n", rtr()); db_printf("cr0\t0x%08x\n", rcr0()); db_printf("cr2\t0x%08x\n", rcr2()); db_printf("cr3\t0x%08x\n", rcr3()); db_printf("cr4\t0x%08x\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016llx\n", rxcr(0)); if (amd_feature & (AMDID_NX | AMDID_LM)) db_printf("EFER\t0x%016llx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t0x%016llx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); if (((cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD) && CPUID_TO_FAMILY(cpu_id) >= 6) || cpu_vendor_id == CPU_VENDOR_HYGON) db_printf("DEBUG_CTL\t0x%016llx\n", rdmsr(MSR_DEBUGCTLMSR)); if (cpu_feature & CPUID_PAT) db_printf("PAT\t0x%016llx\n", rdmsr(MSR_PAT)); } DB_SHOW_COMMAND_FLAGS(dbregs, db_show_dbregs, DB_CMD_MEMSAFE) { db_printf("dr0\t0x%08x\n", rdr0()); db_printf("dr1\t0x%08x\n", rdr1()); db_printf("dr2\t0x%08x\n", rdr2()); db_printf("dr3\t0x%08x\n", rdr3()); db_printf("dr6\t0x%08x\n", rdr6()); db_printf("dr7\t0x%08x\n", rdr7()); } DB_SHOW_COMMAND(frame, db_show_frame) { struct trapframe *frame; frame = have_addr ? (struct trapframe *)addr : curthread->td_frame; printf("ss %#x esp %#x efl %#x cs %#x eip %#x\n", frame->tf_ss, frame->tf_esp, frame->tf_eflags, frame->tf_cs, frame->tf_eip); printf("err %#x trapno %d\n", frame->tf_err, frame->tf_trapno); printf("ds %#x es %#x fs %#x\n", frame->tf_ds, frame->tf_es, frame->tf_fs); printf("eax %#x ecx %#x edx %#x ebx %#x\n", frame->tf_eax, frame->tf_ecx, frame->tf_edx, frame->tf_ebx); printf("ebp %#x esi %#x edi %#x\n", frame->tf_ebp, frame->tf_esi, frame->tf_edi); } #endif void sdtossd(sd, ssd) struct segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } static int add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, int *physmap_idxp) { uint64_t lim, ign; int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (length == 0) return (1); lim = 0x100000000; /* 4G */ if (pae_mode && above4g_allow) lim = above24g_allow ? -1ULL : 0x600000000; /* 24G */ if (base >= lim) { printf("%uK of memory above %uGB ignored, pae %d " "above4g_allow %d above24g_allow %d\n", (u_int)(length / 1024), (u_int)(lim >> 30), pae_mode, above4g_allow, above24g_allow); return (1); } if (base + length >= lim) { ign = base + length - lim; length -= ign; printf("%uK of memory above %uGB ignored, pae %d " "above4g_allow %d above24g_allow %d\n", (u_int)(ign / 1024), (u_int)(lim >> 30), pae_mode, above4g_allow, above24g_allow); } /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. */ insert_idx = physmap_idx + 2; for (i = 0; i <= physmap_idx; i += 2) { if (base < physmap[i + 1]) { if (base + length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { physmap[insert_idx] = base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYS_AVAIL_ENTRIES) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = physmap_idx; i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = base; physmap[insert_idx + 1] = base + length; return (1); } static int add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) { if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016llx len=%016llx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) return (1); return (add_physmap_entry(smap->base, smap->length, physmap, physmap_idxp)); } static void add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap, int *physmap_idxp) { struct bios_smap *smap, *smapend; u_int32_t smapsize; /* * Memory map from INT 15:E820. * * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes SMAP. */ smapsize = *((u_int32_t *)smapbase - 1); smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); for (smap = smapbase; smap < smapend; smap++) if (!add_smap_entry(smap, physmap, physmap_idxp)) break; } static void basemem_setup(void) { if (basemem > 640) { printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", basemem); basemem = 640; } pmap_basemem_setup(basemem); } /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * If we cannot accurately determine the physical memory map, then use * value from the 0xE801 call, and failing that, the RTC. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ static void getmemsize(int first) { int has_smap, off, physmap_idx, pa_indx, da_indx; u_long memtest; vm_paddr_t physmap[PHYS_AVAIL_ENTRIES]; quad_t dcons_addr, dcons_size, physmem_tunable; int hasbrokenint12, i, res __diagused; u_int extmem; struct vm86frame vmf; struct vm86context vmc; vm_paddr_t pa; struct bios_smap *smap, *smapbase; caddr_t kmdp; has_smap = 0; bzero(&vmf, sizeof(vmf)); bzero(physmap, sizeof(physmap)); basemem = 0; /* * Tell the physical memory allocator about pages used to store * the kernel and preloaded data. See kmem_bootstrap_free(). */ vm_phys_early_add_seg((vm_paddr_t)KERNLOAD, trunc_page(first)); TUNABLE_INT_FETCH("hw.above4g_allow", &above4g_allow); TUNABLE_INT_FETCH("hw.above24g_allow", &above24g_allow); /* * Check if the loader supplied an SMAP memory map. If so, * use that and do not make any VM86 calls. */ physmap_idx = 0; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase != NULL) { add_smap_entries(smapbase, physmap, &physmap_idx); has_smap = 1; goto have_smap; } /* * Some newer BIOSes have a broken INT 12H implementation * which causes a kernel panic immediately. In this case, we * need use the SMAP to determine the base memory size. */ hasbrokenint12 = 0; TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12); if (hasbrokenint12 == 0) { /* Use INT12 to determine base memory size. */ vm86_intcall(0x12, &vmf); basemem = vmf.vmf_ax; basemem_setup(); } /* * Fetch the memory map with INT 15:E820. Map page 1 R/W into * the kernel page table so we can use it as a buffer. The * kernel will unmap this page later. */ vmc.npages = 0; smap = (void *)vm86_addpage(&vmc, 1, PMAP_MAP_LOW + ptoa(1)); res = vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di); KASSERT(res != 0, ("vm86_getptr() failed: address not found")); vmf.vmf_ebx = 0; do { vmf.vmf_eax = 0xE820; vmf.vmf_edx = SMAP_SIG; vmf.vmf_ecx = sizeof(struct bios_smap); i = vm86_datacall(0x15, &vmf, &vmc); if (i || vmf.vmf_eax != SMAP_SIG) break; has_smap = 1; if (!add_smap_entry(smap, physmap, &physmap_idx)) break; } while (vmf.vmf_ebx != 0); have_smap: /* * If we didn't fetch the "base memory" size from INT12, * figure it out from the SMAP (or just guess). */ if (basemem == 0) { for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] == 0x00000000) { basemem = physmap[i + 1] / 1024; break; } } /* XXX: If we couldn't find basemem from SMAP, just guess. */ if (basemem == 0) basemem = 640; basemem_setup(); } if (physmap[1] != 0) goto physmap_done; /* * If we failed to find an SMAP, figure out the extended * memory size. We will then build a simple memory map with * two segments, one for "base memory" and the second for * "extended memory". Note that "extended memory" starts at a * physical address of 1MB and that both basemem and extmem * are in units of 1KB. * * First, try to fetch the extended memory size via INT 15:E801. */ vmf.vmf_ax = 0xE801; if (vm86_intcall(0x15, &vmf) == 0) { extmem = vmf.vmf_cx + vmf.vmf_dx * 64; } else { /* * If INT15:E801 fails, this is our last ditch effort * to determine the extended memory size. Currently * we prefer the RTC value over INT15:88. */ #if 0 vmf.vmf_ah = 0x88; vm86_intcall(0x15, &vmf); extmem = vmf.vmf_ax; #else extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8); #endif } /* * Special hack for chipsets that still remap the 384k hole when * there's 16MB of memory - this really confuses people that * are trying to use bus mastering ISA controllers with the * "16MB limit"; they only have 16MB, but the remapping puts * them beyond the limit. * * If extended memory is between 15-16MB (16-17MB phys address range), * chop it to 15MB. */ if ((extmem > 15 * 1024) && (extmem < 16 * 1024)) extmem = 15 * 1024; physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; physmap_done: /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ alloc_ap_trampoline(physmap, &physmap_idx); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. * * This is especially confusing when it is much larger than the * memory size and is displayed as "realmem". */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_QUAD_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * If we have an SMAP, don't allow MAXMEM or hw.physmem to extend * the amount of memory in the system. */ if (has_smap && Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); /* * The boot memory test is disabled by default, as it takes a * significant amount of time on large-memory systems, and is * unfriendly to virtual machines as it unnecessarily touches all * pages. * * A general name is used as the code may be extended to support * additional tests beyond the current "page present" test. */ memtest = 0; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * map page into kernel: valid, read/write,non-cacheable */ ptr = (int *)pmap_cmap3(pa, PG_V | PG_RW | PG_N); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ENTRIES) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == PHYS_AVAIL_ENTRIES) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } pmap_cmap3(0, 0); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + off); } static void i386_kdb_init(void) { #ifdef DDB db_fetch_ksymtab(bootinfo.bi_symtab, bootinfo.bi_esymtab, 0); #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif } static void fixup_idt(void) { struct gate_descriptor *ip; uintptr_t off; int x; for (x = 0; x < NIDT; x++) { ip = &idt[x]; if (ip->gd_type != SDT_SYS386IGT && ip->gd_type != SDT_SYS386TGT) continue; off = ip->gd_looffset + (((u_int)ip->gd_hioffset) << 16); KASSERT(off >= (uintptr_t)start_exceptions && off < (uintptr_t)end_exceptions, ("IDT[%d] type %d off %#x", x, ip->gd_type, off)); off += setidt_disp; MPASS(off >= PMAP_TRM_MIN_ADDRESS && off < PMAP_TRM_MAX_ADDRESS); ip->gd_looffset = off; ip->gd_hioffset = off >> 16; } } static void i386_setidt1(void) { int x; /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DE, &IDTVEC(div), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NM, &IDTVEC(dna), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DF, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL)); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_TS, &IDTVEC(tss), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NP, &IDTVEC(missing), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SS, &IDTVEC(stk), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_PF, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_AC, &IDTVEC(align), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #ifdef XENHVM setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); #endif } static void i386_setidt2(void) { setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); } #if defined(DEV_ISA) && !defined(DEV_ATPIC) static void i386_setidt3(void) { setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); } #endif register_t init386(int first) { struct region_descriptor r_gdt, r_idt; /* table descriptors */ int gsel_tss, metadata_missing, x, pa; struct pcpu *pc; struct xstate_hdr *xhdr; caddr_t kmdp; vm_offset_t addend; size_t ucode_len; thread0.td_kstack = proc0kstack; thread0.td_kstack_pages = TD0_KSTACK_PAGES; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); if (bootinfo.bi_modulep) { metadata_missing = 0; addend = (vm_paddr_t)bootinfo.bi_modulep < KERNBASE ? PMAP_MAP_LOW : 0; preload_metadata = (caddr_t)bootinfo.bi_modulep + addend; preload_bootstrap_relocate(addend); } else { metadata_missing = 1; } if (bootinfo.bi_envp != 0) { addend = (vm_paddr_t)bootinfo.bi_envp < KERNBASE ? PMAP_MAP_LOW : 0; init_static_kenv((char *)bootinfo.bi_envp + addend, 0); } else { init_static_kenv(NULL, 0); } /* * Re-evaluate CPU features if we loaded a microcode update. */ ucode_len = ucode_load_bsp(first); if (ucode_len != 0) { identify_cpu(); first = roundup2(first + ucode_len, PAGE_SIZE); } identify_hypervisor(); /* Init basic tunables, hz etc */ init_param1(); /* Set bootmethod to BIOS: it's the only supported on i386. */ strlcpy(bootmethod, "BIOS", sizeof(bootmethod)); /* * Make gdt memory segments. All segments cover the full 4GB * of address space and permissions are enforced at page level. */ gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUFS_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUGS_SEL].ssd_limit = atop(0 - 1); pc = &__pcpu[0]; gdt_segs[GPRIV_SEL].ssd_limit = atop(0 - 1); gdt_segs[GPRIV_SEL].ssd_base = (int)pc; gdt_segs[GPROC0_SEL].ssd_base = (int)&common_tss0; for (x = 0; x < NGDT; x++) ssdtosd(&gdt_segs[x], &gdt0[x].sd); r_gdt.rd_limit = NGDT * sizeof(gdt0[0]) - 1; r_gdt.rd_base = (int)gdt0; mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN); lgdt(&r_gdt); pcpu_init(pc, 0, sizeof(struct pcpu)); for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE) pmap_kenter(pa, pa); dpcpu_init((void *)first, 0); first += DPCPU_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); /* Non-late cninit() and printf() can be moved up to here. */ /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE); i386_setidt1(); r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (int) idt; lidt(&r_idt); finishidentcpu(); /* Final stage of CPU initialization */ /* * Initialize the clock before the console so that console * initialization can use DELAY(). */ clock_init(); i386_setidt2(); pmap_set_nx(); initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* pointer to selector slot for %fs/%gs */ PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); /* Initialize the tss (except for the final esp0) early for vm86. */ common_tss0.tss_esp0 = thread0.td_kstack + thread0.td_kstack_pages * PAGE_SIZE - VM86_STACK_SPACE; common_tss0.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL); common_tss0.tss_ioopt = sizeof(struct i386tss) << 16; gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); ltr(gsel_tss); /* Initialize the PIC early for vm86 calls. */ #ifdef DEV_ISA #ifdef DEV_ATPIC elcr_probe(); atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ i386_setidt3(); #endif #endif /* * The console and kdb should be initialized even earlier than here, * but some console drivers don't work until after getmemsize(). * Default to late console initialization to support these drivers. * This loses mainly printf()s in getmemsize() and early debugging. */ TUNABLE_INT_FETCH("debug.late_console", &late_console); if (!late_console) { cninit(); i386_kdb_init(); } kmdp = preload_search_by_type("elf kernel"); link_elf_ireloc(kmdp); vm86_initialize(); getmemsize(first); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ if (late_console) cninit(); if (metadata_missing) printf("WARNING: loader(8) metadata is missing!\n"); if (late_console) i386_kdb_init(); msgbufinit(msgbufp, msgbufsize); npxinit(true); /* * Set up thread0 pcb after npxinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } PCPU_SET(curpcb, thread0.td_pcb); /* Move esp0 in the tss to its final place. */ /* Note: -16 is so we can grow the trapframe if we came from vm86 */ common_tss0.tss_esp0 = (vm_offset_t)thread0.td_pcb - VM86_STACK_SPACE; PCPU_SET(kesp0, common_tss0.tss_esp0); gdt[GPROC0_SEL].sd.sd_type = SDT_SYS386TSS; /* clear busy bit */ ltr(gsel_tss); /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; thread0.td_pcb->pcb_cr3 = pmap_get_kcr3(); thread0.td_pcb->pcb_ext = 0; thread0.td_frame = &proc0_tf; #ifdef FDT x86_init_fdt(); #endif /* Location of kernel stack for locore */ return ((register_t)thread0.td_pcb); } static void machdep_init_trampoline(void) { struct region_descriptor r_gdt, r_idt; struct i386tss *tss; char *copyout_buf, *trampoline, *tramp_stack_base; int x; gdt = pmap_trm_alloc(sizeof(union descriptor) * NGDT * mp_ncpus, M_NOWAIT | M_ZERO); bcopy(gdt0, gdt, sizeof(union descriptor) * NGDT); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (int)gdt; lgdt(&r_gdt); tss = pmap_trm_alloc(sizeof(struct i386tss) * mp_ncpus, M_NOWAIT | M_ZERO); bcopy(&common_tss0, tss, sizeof(struct i386tss)); gdt[GPROC0_SEL].sd.sd_lobase = (int)tss; gdt[GPROC0_SEL].sd.sd_hibase = (u_int)tss >> 24; gdt[GPROC0_SEL].sd.sd_type = SDT_SYS386TSS; PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); PCPU_SET(common_tssp, tss); ltr(GSEL(GPROC0_SEL, SEL_KPL)); trampoline = pmap_trm_alloc(end_exceptions - start_exceptions, M_NOWAIT); bcopy(start_exceptions, trampoline, end_exceptions - start_exceptions); tramp_stack_base = pmap_trm_alloc(TRAMP_STACK_SZ, M_NOWAIT); PCPU_SET(trampstk, (uintptr_t)tramp_stack_base + TRAMP_STACK_SZ - VM86_STACK_SPACE); tss[0].tss_esp0 = PCPU_GET(trampstk); idt = pmap_trm_alloc(sizeof(idt0), M_NOWAIT | M_ZERO); bcopy(idt0, idt, sizeof(idt0)); /* Re-initialize new IDT since the handlers were relocated */ setidt_disp = trampoline - start_exceptions; fixup_idt(); r_idt.rd_limit = sizeof(struct gate_descriptor) * NIDT - 1; r_idt.rd_base = (int)idt; lidt(&r_idt); /* dblfault TSS */ dblfault_tss = pmap_trm_alloc(sizeof(struct i386tss), M_NOWAIT | M_ZERO); dblfault_stack = pmap_trm_alloc(PAGE_SIZE, M_NOWAIT); dblfault_tss->tss_esp = dblfault_tss->tss_esp0 = dblfault_tss->tss_esp1 = dblfault_tss->tss_esp2 = (int)dblfault_stack + PAGE_SIZE; dblfault_tss->tss_ss = dblfault_tss->tss_ss0 = dblfault_tss->tss_ss1 = dblfault_tss->tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss->tss_cr3 = pmap_get_kcr3(); dblfault_tss->tss_eip = (int)dblfault_handler; dblfault_tss->tss_eflags = PSL_KERNEL; dblfault_tss->tss_ds = dblfault_tss->tss_es = dblfault_tss->tss_gs = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss->tss_fs = GSEL(GPRIV_SEL, SEL_KPL); dblfault_tss->tss_cs = GSEL(GCODE_SEL, SEL_KPL); dblfault_tss->tss_ldt = GSEL(GLDT_SEL, SEL_KPL); gdt[GPANIC_SEL].sd.sd_lobase = (int)dblfault_tss; gdt[GPANIC_SEL].sd.sd_hibase = (u_int)dblfault_tss >> 24; /* make ldt memory segments */ ldt = pmap_trm_alloc(sizeof(union descriptor) * NLDT, M_NOWAIT | M_ZERO); gdt[GLDT_SEL].sd.sd_lobase = (int)ldt; gdt[GLDT_SEL].sd.sd_hibase = (u_int)ldt >> 24; ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1); ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1); for (x = 0; x < nitems(ldt_segs); x++) ssdtosd(&ldt_segs[x], &ldt[x].sd); _default_ldt = GSEL(GLDT_SEL, SEL_KPL); lldt(_default_ldt); PCPU_SET(currentldt, _default_ldt); copyout_buf = pmap_trm_alloc(TRAMP_COPYOUT_SZ, M_NOWAIT); PCPU_SET(copyout_buf, copyout_buf); copyout_init_tramp(); } SYSINIT(vm_mem, SI_SUB_VM, SI_ORDER_SECOND, machdep_init_trampoline, NULL); #ifdef COMPAT_43 static void i386_setup_lcall_gate(void) { struct sysentvec *sv; struct user_segment_descriptor desc; u_int lcall_addr; sv = &elf32_freebsd_sysvec; lcall_addr = (uintptr_t)sv->sv_psstrings - sz_lcall_tramp; bzero(&desc, sizeof(desc)); desc.sd_type = SDT_MEMERA; desc.sd_dpl = SEL_UPL; desc.sd_p = 1; desc.sd_def32 = 1; desc.sd_gran = 1; desc.sd_lolimit = 0xffff; desc.sd_hilimit = 0xf; desc.sd_lobase = lcall_addr; desc.sd_hibase = lcall_addr >> 24; bcopy(&desc, &ldt[LSYS5CALLS_SEL], sizeof(desc)); } SYSINIT(elf32, SI_SUB_EXEC, SI_ORDER_ANY, i386_setup_lcall_gate, NULL); #endif void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((u_int32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; critical_enter(); } else td->td_md.md_spinlock_count++; } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) { critical_exit(); intr_restore(flags); } } #if defined(I586_CPU) && !defined(NO_F00F_HACK) static void f00f_hack(void *unused); SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL); static void f00f_hack(void *unused) { struct region_descriptor r_idt; struct gate_descriptor *new_idt; vm_offset_t tmp; if (!has_f00f_bug) return; printf("Intel Pentium detected, installing workaround for F00F bug\n"); tmp = (vm_offset_t)pmap_trm_alloc(PAGE_SIZE * 3, M_NOWAIT | M_ZERO); if (tmp == 0) panic("kmem_malloc returned 0"); tmp = round_page(tmp); /* Put the problematic entry (#6) at the end of the lower page. */ new_idt = (struct gate_descriptor *) (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor)); bcopy(idt, new_idt, sizeof(idt0)); r_idt.rd_base = (u_int)new_idt; r_idt.rd_limit = sizeof(idt0) - 1; lidt(&r_idt); /* SMP machines do not need the F00F hack. */ idt = new_idt; pmap_protect(kernel_pmap, tmp, tmp + PAGE_SIZE, VM_PROT_READ); } #endif /* defined(I586_CPU) && !NO_F00F_HACK */ /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_edi = tf->tf_edi; pcb->pcb_esi = tf->tf_esi; pcb->pcb_ebp = tf->tf_ebp; pcb->pcb_ebx = tf->tf_ebx; pcb->pcb_eip = tf->tf_eip; pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8; pcb->pcb_gs = rgs(); } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ diff --git a/sys/i386/include/mp_watchdog.h b/sys/i386/include/mp_watchdog.h deleted file mode 100644 index e1fc0742ee1e..000000000000 --- a/sys/i386/include/mp_watchdog.h +++ /dev/null @@ -1,36 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 Robert N. M. Watson - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -#ifndef _MACHINE_MP_WATCHDOG_H_ -#define _MACHINE_MP_WATCHDOG_H_ - -void ap_watchdog(u_int cpuid); - -#endif /* !_MACHINE_MP_WATCHDOG_H_ */ diff --git a/sys/x86/x86/cpu_machdep.c b/sys/x86/x86/cpu_machdep.c index 759d9e8c6c95..7127ca99999e 100644 --- a/sys/x86/x86/cpu_machdep.c +++ b/sys/x86/x86/cpu_machdep.c @@ -1,1544 +1,1539 @@ /*- * Copyright (c) 2003 Peter Wemm. * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_acpi.h" #include "opt_atpic.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_isa.h" #include "opt_kdb.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" -#include "opt_mp_watchdog.h" #include "opt_platform.h" #include "opt_sched.h" #ifdef __i386__ #include "opt_apic.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include -#include #include #ifdef SMP #include #endif #ifdef CPU_ELAN #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #define STATE_RUNNING 0x0 #define STATE_MWAIT 0x1 #define STATE_SLEEPING 0x2 #ifdef SMP static u_int cpu_reset_proxyid; static volatile u_int cpu_reset_proxy_active; #endif char bootmethod[16]; SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0, "System firmware boot method"); struct msr_op_arg { u_int msr; int op; uint64_t arg1; uint64_t *res; }; static void x86_msr_op_one(void *argp) { struct msr_op_arg *a; uint64_t v; a = argp; switch (a->op) { case MSR_OP_ANDNOT: v = rdmsr(a->msr); v &= ~a->arg1; wrmsr(a->msr, v); break; case MSR_OP_OR: v = rdmsr(a->msr); v |= a->arg1; wrmsr(a->msr, v); break; case MSR_OP_WRITE: wrmsr(a->msr, a->arg1); break; case MSR_OP_READ: v = rdmsr(a->msr); *a->res = v; break; } } #define MSR_OP_EXMODE_MASK 0xf0000000 #define MSR_OP_OP_MASK 0x000000ff #define MSR_OP_GET_CPUID(x) (((x) & ~MSR_OP_EXMODE_MASK) >> 8) void x86_msr_op(u_int msr, u_int op, uint64_t arg1, uint64_t *res) { struct thread *td; struct msr_op_arg a; cpuset_t set; u_int exmode; int bound_cpu, cpu, i, is_bound; a.op = op & MSR_OP_OP_MASK; MPASS(a.op == MSR_OP_ANDNOT || a.op == MSR_OP_OR || a.op == MSR_OP_WRITE || a.op == MSR_OP_READ); exmode = op & MSR_OP_EXMODE_MASK; MPASS(exmode == MSR_OP_LOCAL || exmode == MSR_OP_SCHED_ALL || exmode == MSR_OP_SCHED_ONE || exmode == MSR_OP_RENDEZVOUS_ALL || exmode == MSR_OP_RENDEZVOUS_ONE); a.msr = msr; a.arg1 = arg1; a.res = res; switch (exmode) { case MSR_OP_LOCAL: x86_msr_op_one(&a); break; case MSR_OP_SCHED_ALL: td = curthread; thread_lock(td); is_bound = sched_is_bound(td); bound_cpu = td->td_oncpu; CPU_FOREACH(i) { sched_bind(td, i); x86_msr_op_one(&a); } if (is_bound) sched_bind(td, bound_cpu); else sched_unbind(td); thread_unlock(td); break; case MSR_OP_SCHED_ONE: td = curthread; cpu = MSR_OP_GET_CPUID(op); thread_lock(td); is_bound = sched_is_bound(td); bound_cpu = td->td_oncpu; if (!is_bound || bound_cpu != cpu) sched_bind(td, cpu); x86_msr_op_one(&a); if (is_bound) { if (bound_cpu != cpu) sched_bind(td, bound_cpu); } else { sched_unbind(td); } thread_unlock(td); break; case MSR_OP_RENDEZVOUS_ALL: smp_rendezvous(smp_no_rendezvous_barrier, x86_msr_op_one, smp_no_rendezvous_barrier, &a); break; case MSR_OP_RENDEZVOUS_ONE: cpu = MSR_OP_GET_CPUID(op); CPU_SETOF(cpu, &set); smp_rendezvous_cpus(set, smp_no_rendezvous_barrier, x86_msr_op_one, smp_no_rendezvous_barrier, &a); break; } } /* * Automatically initialized per CPU errata in cpu_idle_tun below. */ bool mwait_cpustop_broken = false; SYSCTL_BOOL(_machdep, OID_AUTO, mwait_cpustop_broken, CTLFLAG_RDTUN, &mwait_cpustop_broken, 0, "Can not reliably wake MONITOR/MWAIT cpus without interrupts"); /* * Flush the D-cache for non-DMA I/O so that the I-cache can * be made coherent later. */ void cpu_flush_dcache(void *ptr, size_t len) { /* Not applicable */ } void acpi_cpu_c1(void) { __asm __volatile("sti; hlt"); } /* * Use mwait to pause execution while waiting for an interrupt or * another thread to signal that there is more work. * * NOTE: Interrupts will cause a wakeup; however, this function does * not enable interrupt handling. The caller is responsible to enable * interrupts. */ void acpi_cpu_idle_mwait(uint32_t mwait_hint) { int *state; uint64_t v; /* * A comment in Linux patch claims that 'CPUs run faster with * speculation protection disabled. All CPU threads in a core * must disable speculation protection for it to be * disabled. Disable it while we are idle so the other * hyperthread can run fast.' * * XXXKIB. Software coordination mode should be supported, * but all Intel CPUs provide hardware coordination. */ state = &PCPU_PTR(monitorbuf)->idle_state; KASSERT(atomic_load_int(state) == STATE_SLEEPING, ("cpu_mwait_cx: wrong monitorbuf state")); atomic_store_int(state, STATE_MWAIT); if (PCPU_GET(ibpb_set) || hw_ssb_active) { v = rdmsr(MSR_IA32_SPEC_CTRL); wrmsr(MSR_IA32_SPEC_CTRL, v & ~(IA32_SPEC_CTRL_IBRS | IA32_SPEC_CTRL_STIBP | IA32_SPEC_CTRL_SSBD)); } else { v = 0; } cpu_monitor(state, 0, 0); if (atomic_load_int(state) == STATE_MWAIT) cpu_mwait(MWAIT_INTRBREAK, mwait_hint); /* * SSB cannot be disabled while we sleep, or rather, if it was * disabled, the sysctl thread will bind to our cpu to tweak * MSR. */ if (v != 0) wrmsr(MSR_IA32_SPEC_CTRL, v); /* * We should exit on any event that interrupts mwait, because * that event might be a wanted interrupt. */ atomic_store_int(state, STATE_RUNNING); } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { uint64_t tsc1, tsc2; uint64_t acnt, mcnt, perf; register_t reg; if (pcpu_find(cpu_id) == NULL || rate == NULL) return (EINVAL); #ifdef __i386__ if ((cpu_feature & CPUID_TSC) == 0) return (EOPNOTSUPP); #endif /* * If TSC is P-state invariant and APERF/MPERF MSRs do not exist, * DELAY(9) based logic fails. */ if (tsc_is_invariant && !tsc_perf_stat) return (EOPNOTSUPP); #ifdef SMP if (smp_cpus > 1) { /* Schedule ourselves on the indicated cpu. */ thread_lock(curthread); sched_bind(curthread, cpu_id); thread_unlock(curthread); } #endif /* Calibrate by measuring a short delay. */ reg = intr_disable(); if (tsc_is_invariant) { wrmsr(MSR_MPERF, 0); wrmsr(MSR_APERF, 0); tsc1 = rdtsc(); DELAY(1000); mcnt = rdmsr(MSR_MPERF); acnt = rdmsr(MSR_APERF); tsc2 = rdtsc(); intr_restore(reg); perf = 1000 * acnt / mcnt; *rate = (tsc2 - tsc1) * perf; } else { tsc1 = rdtsc(); DELAY(1000); tsc2 = rdtsc(); intr_restore(reg); *rate = (tsc2 - tsc1) * 1000; } #ifdef SMP if (smp_cpus > 1) { thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } #endif return (0); } /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) halt(); } static void cpu_reset_real(void) { struct region_descriptor null_idt; int b; disable_intr(); #ifdef CPU_ELAN if (elan_mmcr != NULL) elan_mmcr->RESCFG = 1; #endif #ifdef __i386__ if (cpu == CPU_GEODE1100) { /* Attempt Geode's own reset */ outl(0xcf8, 0x80009044ul); outl(0xcfc, 0xf); } #endif #if !defined(BROKEN_KEYBOARD_RESET) /* * Attempt to do a CPU reset via the keyboard controller, * do not turn off GateA20, as any machine that fails * to do the reset here would then end up in no man's land. */ outb(IO_KBD + 4, 0xFE); DELAY(500000); /* wait 0.5 sec to see if that did it */ #endif /* * Attempt to force a reset via the Reset Control register at * I/O port 0xcf9. Bit 2 forces a system reset when it * transitions from 0 to 1. Bit 1 selects the type of reset * to attempt: 0 selects a "soft" reset, and 1 selects a * "hard" reset. We try a "hard" reset. The first write sets * bit 1 to select a "hard" reset and clears bit 2. The * second write forces a 0 -> 1 transition in bit 2 to trigger * a reset. */ outb(0xcf9, 0x2); outb(0xcf9, 0x6); DELAY(500000); /* wait 0.5 sec to see if that did it */ /* * Attempt to force a reset via the Fast A20 and Init register * at I/O port 0x92. Bit 1 serves as an alternate A20 gate. * Bit 0 asserts INIT# when set to 1. We are careful to only * preserve bit 1 while setting bit 0. We also must clear bit * 0 before setting it if it isn't already clear. */ b = inb(0x92); if (b != 0xff) { if ((b & 0x1) != 0) outb(0x92, b & 0xfe); outb(0x92, b | 0x1); DELAY(500000); /* wait 0.5 sec to see if that did it */ } printf("No known reset method worked, attempting CPU shutdown\n"); DELAY(1000000); /* wait 1 sec for printf to complete */ /* Wipe the IDT. */ null_idt.rd_limit = 0; null_idt.rd_base = 0; lidt(&null_idt); /* "good night, sweet prince .... " */ breakpoint(); /* NOTREACHED */ while(1); } #ifdef SMP static void cpu_reset_proxy(void) { cpu_reset_proxy_active = 1; while (cpu_reset_proxy_active == 1) ia32_pause(); /* Wait for other cpu to see that we've started */ printf("cpu_reset_proxy: Stopped CPU %d\n", cpu_reset_proxyid); DELAY(1000000); cpu_reset_real(); } #endif void cpu_reset(void) { #ifdef SMP struct monitorbuf *mb; cpuset_t map; u_int cnt; if (smp_started) { map = all_cpus; CPU_CLR(PCPU_GET(cpuid), &map); CPU_ANDNOT(&map, &map, &stopped_cpus); if (!CPU_EMPTY(&map)) { printf("cpu_reset: Stopping other CPUs\n"); stop_cpus(map); } if (PCPU_GET(cpuid) != 0) { cpu_reset_proxyid = PCPU_GET(cpuid); cpustop_restartfunc = cpu_reset_proxy; cpu_reset_proxy_active = 0; printf("cpu_reset: Restarting BSP\n"); /* Restart CPU #0. */ CPU_SETOF(0, &started_cpus); mb = &pcpu_find(0)->pc_monitorbuf; atomic_store_int(&mb->stop_state, MONITOR_STOPSTATE_RUNNING); cnt = 0; while (cpu_reset_proxy_active == 0 && cnt < 10000000) { ia32_pause(); cnt++; /* Wait for BSP to announce restart */ } if (cpu_reset_proxy_active == 0) { printf("cpu_reset: Failed to restart BSP\n"); } else { cpu_reset_proxy_active = 2; while (1) ia32_pause(); /* NOTREACHED */ } } } #endif cpu_reset_real(); /* NOTREACHED */ } bool cpu_mwait_usable(void) { return ((cpu_feature2 & CPUID2_MON) != 0 && ((cpu_mon_mwait_flags & (CPUID5_MON_MWAIT_EXT | CPUID5_MWAIT_INTRBREAK)) == (CPUID5_MON_MWAIT_EXT | CPUID5_MWAIT_INTRBREAK))); } void (*cpu_idle_hook)(sbintime_t) = NULL; /* ACPI idle hook. */ int cpu_amdc1e_bug = 0; /* AMD C1E APIC workaround required. */ static int idle_mwait = 1; /* Use MONITOR/MWAIT for short idle. */ SYSCTL_INT(_machdep, OID_AUTO, idle_mwait, CTLFLAG_RWTUN, &idle_mwait, 0, "Use MONITOR/MWAIT for short idle"); static bool cpu_idle_enter(int *statep, int newstate) { KASSERT(atomic_load_int(statep) == STATE_RUNNING, ("%s: state %d", __func__, atomic_load_int(statep))); /* * A fence is needed to prevent reordering of the load in * sched_runnable() with this store to the idle state word. Without it, * cpu_idle_wakeup() can observe the state as STATE_RUNNING after having * added load to the queue, and elide an IPI. Then, sched_runnable() * can observe tdq_load == 0, so the CPU ends up idling with pending * work. tdq_notify() similarly ensures that a prior update to tdq_load * is visible before calling cpu_idle_wakeup(). */ atomic_store_int(statep, newstate); #if defined(SCHED_ULE) && defined(SMP) atomic_thread_fence_seq_cst(); #endif /* * Since we may be in a critical section from cpu_idle(), if * an interrupt fires during that critical section we may have * a pending preemption. If the CPU halts, then that thread * may not execute until a later interrupt awakens the CPU. * To handle this race, check for a runnable thread after * disabling interrupts and immediately return if one is * found. Also, we must absolutely guarentee that hlt is * the next instruction after sti. This ensures that any * interrupt that fires after the call to disable_intr() will * immediately awaken the CPU from hlt. Finally, please note * that on x86 this works fine because of interrupts enabled only * after the instruction following sti takes place, while IF is set * to 1 immediately, allowing hlt instruction to acknowledge the * interrupt. */ disable_intr(); if (sched_runnable()) { enable_intr(); atomic_store_int(statep, STATE_RUNNING); return (false); } else { return (true); } } static void cpu_idle_exit(int *statep) { atomic_store_int(statep, STATE_RUNNING); } static void cpu_idle_acpi(sbintime_t sbt) { int *state; state = &PCPU_PTR(monitorbuf)->idle_state; if (cpu_idle_enter(state, STATE_SLEEPING)) { if (cpu_idle_hook) cpu_idle_hook(sbt); else acpi_cpu_c1(); cpu_idle_exit(state); } } static void cpu_idle_hlt(sbintime_t sbt) { int *state; state = &PCPU_PTR(monitorbuf)->idle_state; if (cpu_idle_enter(state, STATE_SLEEPING)) { acpi_cpu_c1(); atomic_store_int(state, STATE_RUNNING); } } static void cpu_idle_mwait(sbintime_t sbt) { int *state; state = &PCPU_PTR(monitorbuf)->idle_state; if (cpu_idle_enter(state, STATE_MWAIT)) { cpu_monitor(state, 0, 0); if (atomic_load_int(state) == STATE_MWAIT) __asm __volatile("sti; mwait" : : "a" (MWAIT_C1), "c" (0)); else enable_intr(); cpu_idle_exit(state); } } static void cpu_idle_spin(sbintime_t sbt) { int *state; int i; state = &PCPU_PTR(monitorbuf)->idle_state; atomic_store_int(state, STATE_RUNNING); /* * The sched_runnable() call is racy but as long as there is * a loop missing it one time will have just a little impact if any * (and it is much better than missing the check at all). */ for (i = 0; i < 1000; i++) { if (sched_runnable()) return; cpu_spinwait(); } } void (*cpu_idle_fn)(sbintime_t) = cpu_idle_acpi; void cpu_idle(int busy) { uint64_t msr; sbintime_t sbt = -1; CTR1(KTR_SPARE2, "cpu_idle(%d)", busy); -#ifdef MP_WATCHDOG - ap_watchdog(PCPU_GET(cpuid)); -#endif /* If we are busy - try to use fast methods. */ if (busy) { if ((cpu_feature2 & CPUID2_MON) && idle_mwait) { cpu_idle_mwait(busy); goto out; } } /* If we have time - switch timers into idle mode. */ if (!busy) { critical_enter(); sbt = cpu_idleclock(); } /* Apply AMD APIC timer C1E workaround. */ if (cpu_amdc1e_bug && cpu_disable_c3_sleep) { msr = rdmsr(MSR_AMDK8_IPM); if ((msr & (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT)) != 0) wrmsr(MSR_AMDK8_IPM, msr & ~(AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT)); } /* Call main idle method. */ cpu_idle_fn(sbt); /* Switch timers back into active mode. */ if (!busy) { cpu_activeclock(); critical_exit(); } out: CTR1(KTR_SPARE2, "cpu_idle(%d) done", busy); } static int cpu_idle_apl31_workaround; SYSCTL_INT(_machdep, OID_AUTO, idle_apl31, CTLFLAG_RW, &cpu_idle_apl31_workaround, 0, "Apollo Lake APL31 MWAIT bug workaround"); int cpu_idle_wakeup(int cpu) { struct monitorbuf *mb; int *state; mb = &pcpu_find(cpu)->pc_monitorbuf; state = &mb->idle_state; switch (atomic_load_int(state)) { case STATE_SLEEPING: return (0); case STATE_MWAIT: atomic_store_int(state, STATE_RUNNING); return (cpu_idle_apl31_workaround ? 0 : 1); case STATE_RUNNING: return (1); default: panic("bad monitor state"); return (1); } } /* * Ordered by speed/power consumption. */ static struct { void *id_fn; char *id_name; int id_cpuid2_flag; } idle_tbl[] = { { .id_fn = cpu_idle_spin, .id_name = "spin" }, { .id_fn = cpu_idle_mwait, .id_name = "mwait", .id_cpuid2_flag = CPUID2_MON }, { .id_fn = cpu_idle_hlt, .id_name = "hlt" }, { .id_fn = cpu_idle_acpi, .id_name = "acpi" }, }; static int idle_sysctl_available(SYSCTL_HANDLER_ARGS) { char *avail, *p; int error; int i; avail = malloc(256, M_TEMP, M_WAITOK); p = avail; for (i = 0; i < nitems(idle_tbl); i++) { if (idle_tbl[i].id_cpuid2_flag != 0 && (cpu_feature2 & idle_tbl[i].id_cpuid2_flag) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; p += sprintf(p, "%s%s", p != avail ? ", " : "", idle_tbl[i].id_name); } error = sysctl_handle_string(oidp, avail, 0, req); free(avail, M_TEMP); return (error); } SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, 0, 0, idle_sysctl_available, "A", "list of available idle functions"); static bool cpu_idle_selector(const char *new_idle_name) { int i; for (i = 0; i < nitems(idle_tbl); i++) { if (idle_tbl[i].id_cpuid2_flag != 0 && (cpu_feature2 & idle_tbl[i].id_cpuid2_flag) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; if (strcmp(idle_tbl[i].id_name, new_idle_name)) continue; cpu_idle_fn = idle_tbl[i].id_fn; if (bootverbose) printf("CPU idle set to %s\n", idle_tbl[i].id_name); return (true); } return (false); } static int cpu_idle_sysctl(SYSCTL_HANDLER_ARGS) { char buf[16], *p; int error, i; p = "unknown"; for (i = 0; i < nitems(idle_tbl); i++) { if (idle_tbl[i].id_fn == cpu_idle_fn) { p = idle_tbl[i].id_name; break; } } strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); return (cpu_idle_selector(buf) ? 0 : EINVAL); } SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 0, cpu_idle_sysctl, "A", "currently selected idle function"); static void cpu_idle_tun(void *unused __unused) { char tunvar[16]; if (TUNABLE_STR_FETCH("machdep.idle", tunvar, sizeof(tunvar))) cpu_idle_selector(tunvar); else if (cpu_vendor_id == CPU_VENDOR_AMD && CPUID_TO_FAMILY(cpu_id) == 0x17 && CPUID_TO_MODEL(cpu_id) == 0x1) { /* Ryzen erratas 1057, 1109. */ cpu_idle_selector("hlt"); idle_mwait = 0; mwait_cpustop_broken = true; } if (cpu_vendor_id == CPU_VENDOR_INTEL && (cpu_id == 0x506c9 || cpu_id == 0x506ca)) { /* * Apollo Lake errata APL31 (public errata APL30). * Stores to the armed address range may not trigger * MWAIT to resume execution. OS needs to use * interrupts to wake processors from MWAIT-induced * sleep states. */ cpu_idle_apl31_workaround = 1; mwait_cpustop_broken = true; } TUNABLE_INT_FETCH("machdep.idle_apl31", &cpu_idle_apl31_workaround); } SYSINIT(cpu_idle_tun, SI_SUB_CPU, SI_ORDER_MIDDLE, cpu_idle_tun, NULL); static int panic_on_nmi = 0xff; SYSCTL_INT(_machdep, OID_AUTO, panic_on_nmi, CTLFLAG_RWTUN, &panic_on_nmi, 0, "Panic on NMI: 1 = H/W failure; 2 = unknown; 0xff = all"); int nmi_is_broadcast = 1; SYSCTL_INT(_machdep, OID_AUTO, nmi_is_broadcast, CTLFLAG_RWTUN, &nmi_is_broadcast, 0, "Chipset NMI is broadcast"); int (*apei_nmi)(void); void nmi_call_kdb(u_int cpu, u_int type, struct trapframe *frame) { bool claimed = false; #ifdef DEV_ISA /* machine/parity/power fail/"kitchen sink" faults */ if (isa_nmi(frame->tf_err)) { claimed = true; if ((panic_on_nmi & 1) != 0) panic("NMI indicates hardware failure"); } #endif /* DEV_ISA */ /* ACPI Platform Error Interfaces callback. */ if (apei_nmi != NULL && (*apei_nmi)()) claimed = true; /* * NMIs can be useful for debugging. They can be hooked up to a * pushbutton, usually on an ISA, PCI, or PCIe card. They can also be * generated by an IPMI BMC, either manually or in response to a * watchdog timeout. For example, see the "power diag" command in * ports/sysutils/ipmitool. They can also be generated by a * hypervisor; see "bhyvectl --inject-nmi". */ #ifdef KDB if (!claimed && (panic_on_nmi & 2) != 0) { if (debugger_on_panic) { printf("NMI/cpu%d ... going to debugger\n", cpu); claimed = kdb_trap(type, 0, frame); } } #endif /* KDB */ if (!claimed && panic_on_nmi != 0) panic("NMI"); } void nmi_handle_intr(u_int type, struct trapframe *frame) { #ifdef SMP if (nmi_is_broadcast) { nmi_call_kdb_smp(type, frame); return; } #endif nmi_call_kdb(PCPU_GET(cpuid), type, frame); } static int hw_ibrs_active; int hw_ibrs_ibpb_active; int hw_ibrs_disable = 1; SYSCTL_INT(_hw, OID_AUTO, ibrs_active, CTLFLAG_RD, &hw_ibrs_active, 0, "Indirect Branch Restricted Speculation active"); SYSCTL_NODE(_machdep_mitigations, OID_AUTO, ibrs, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "Indirect Branch Restricted Speculation active"); SYSCTL_INT(_machdep_mitigations_ibrs, OID_AUTO, active, CTLFLAG_RD, &hw_ibrs_active, 0, "Indirect Branch Restricted Speculation active"); void hw_ibrs_recalculate(bool for_all_cpus) { if ((cpu_ia32_arch_caps & IA32_ARCH_CAP_IBRS_ALL) != 0) { x86_msr_op(MSR_IA32_SPEC_CTRL, (for_all_cpus ? MSR_OP_RENDEZVOUS_ALL : MSR_OP_LOCAL) | (hw_ibrs_disable != 0 ? MSR_OP_ANDNOT : MSR_OP_OR), IA32_SPEC_CTRL_IBRS, NULL); hw_ibrs_active = hw_ibrs_disable == 0; hw_ibrs_ibpb_active = 0; } else { hw_ibrs_active = hw_ibrs_ibpb_active = (cpu_stdext_feature3 & CPUID_STDEXT3_IBPB) != 0 && !hw_ibrs_disable; } } static int hw_ibrs_disable_handler(SYSCTL_HANDLER_ARGS) { int error, val; val = hw_ibrs_disable; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); hw_ibrs_disable = val != 0; hw_ibrs_recalculate(true); return (0); } SYSCTL_PROC(_hw, OID_AUTO, ibrs_disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, hw_ibrs_disable_handler, "I", "Disable Indirect Branch Restricted Speculation"); SYSCTL_PROC(_machdep_mitigations_ibrs, OID_AUTO, disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, hw_ibrs_disable_handler, "I", "Disable Indirect Branch Restricted Speculation"); int hw_ssb_active; int hw_ssb_disable; SYSCTL_INT(_hw, OID_AUTO, spec_store_bypass_disable_active, CTLFLAG_RD, &hw_ssb_active, 0, "Speculative Store Bypass Disable active"); SYSCTL_NODE(_machdep_mitigations, OID_AUTO, ssb, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "Speculative Store Bypass Disable active"); SYSCTL_INT(_machdep_mitigations_ssb, OID_AUTO, active, CTLFLAG_RD, &hw_ssb_active, 0, "Speculative Store Bypass Disable active"); static void hw_ssb_set(bool enable, bool for_all_cpus) { if ((cpu_stdext_feature3 & CPUID_STDEXT3_SSBD) == 0) { hw_ssb_active = 0; return; } hw_ssb_active = enable; x86_msr_op(MSR_IA32_SPEC_CTRL, (enable ? MSR_OP_OR : MSR_OP_ANDNOT) | (for_all_cpus ? MSR_OP_SCHED_ALL : MSR_OP_LOCAL), IA32_SPEC_CTRL_SSBD, NULL); } void hw_ssb_recalculate(bool all_cpus) { switch (hw_ssb_disable) { default: hw_ssb_disable = 0; /* FALLTHROUGH */ case 0: /* off */ hw_ssb_set(false, all_cpus); break; case 1: /* on */ hw_ssb_set(true, all_cpus); break; case 2: /* auto */ hw_ssb_set((cpu_ia32_arch_caps & IA32_ARCH_CAP_SSB_NO) != 0 ? false : true, all_cpus); break; } } static int hw_ssb_disable_handler(SYSCTL_HANDLER_ARGS) { int error, val; val = hw_ssb_disable; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); hw_ssb_disable = val; hw_ssb_recalculate(true); return (0); } SYSCTL_PROC(_hw, OID_AUTO, spec_store_bypass_disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, hw_ssb_disable_handler, "I", "Speculative Store Bypass Disable (0 - off, 1 - on, 2 - auto)"); SYSCTL_PROC(_machdep_mitigations_ssb, OID_AUTO, disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, hw_ssb_disable_handler, "I", "Speculative Store Bypass Disable (0 - off, 1 - on, 2 - auto)"); int hw_mds_disable; /* * Handler for Microarchitectural Data Sampling issues. Really not a * pointer to C function: on amd64 the code must not change any CPU * architectural state except possibly %rflags. Also, it is always * called with interrupts disabled. */ void mds_handler_void(void); void mds_handler_verw(void); void mds_handler_ivb(void); void mds_handler_bdw(void); void mds_handler_skl_sse(void); void mds_handler_skl_avx(void); void mds_handler_skl_avx512(void); void mds_handler_silvermont(void); void (*mds_handler)(void) = mds_handler_void; static int sysctl_hw_mds_disable_state_handler(SYSCTL_HANDLER_ARGS) { const char *state; if (mds_handler == mds_handler_void) state = "inactive"; else if (mds_handler == mds_handler_verw) state = "VERW"; else if (mds_handler == mds_handler_ivb) state = "software IvyBridge"; else if (mds_handler == mds_handler_bdw) state = "software Broadwell"; else if (mds_handler == mds_handler_skl_sse) state = "software Skylake SSE"; else if (mds_handler == mds_handler_skl_avx) state = "software Skylake AVX"; else if (mds_handler == mds_handler_skl_avx512) state = "software Skylake AVX512"; else if (mds_handler == mds_handler_silvermont) state = "software Silvermont"; else state = "unknown"; return (SYSCTL_OUT(req, state, strlen(state))); } SYSCTL_PROC(_hw, OID_AUTO, mds_disable_state, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_hw_mds_disable_state_handler, "A", "Microarchitectural Data Sampling Mitigation state"); SYSCTL_NODE(_machdep_mitigations, OID_AUTO, mds, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "Microarchitectural Data Sampling Mitigation state"); SYSCTL_PROC(_machdep_mitigations_mds, OID_AUTO, state, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_hw_mds_disable_state_handler, "A", "Microarchitectural Data Sampling Mitigation state"); _Static_assert(__offsetof(struct pcpu, pc_mds_tmp) % 64 == 0, "MDS AVX512"); void hw_mds_recalculate(void) { struct pcpu *pc; vm_offset_t b64; u_long xcr0; int i; /* * Allow user to force VERW variant even if MD_CLEAR is not * reported. For instance, hypervisor might unknowingly * filter the cap out. * For the similar reasons, and for testing, allow to enable * mitigation even when MDS_NO cap is set. */ if (cpu_vendor_id != CPU_VENDOR_INTEL || hw_mds_disable == 0 || ((cpu_ia32_arch_caps & IA32_ARCH_CAP_MDS_NO) != 0 && hw_mds_disable == 3)) { mds_handler = mds_handler_void; } else if (((cpu_stdext_feature3 & CPUID_STDEXT3_MD_CLEAR) != 0 && hw_mds_disable == 3) || hw_mds_disable == 1) { mds_handler = mds_handler_verw; } else if (CPUID_TO_FAMILY(cpu_id) == 0x6 && (CPUID_TO_MODEL(cpu_id) == 0x2e || CPUID_TO_MODEL(cpu_id) == 0x1e || CPUID_TO_MODEL(cpu_id) == 0x1f || CPUID_TO_MODEL(cpu_id) == 0x1a || CPUID_TO_MODEL(cpu_id) == 0x2f || CPUID_TO_MODEL(cpu_id) == 0x25 || CPUID_TO_MODEL(cpu_id) == 0x2c || CPUID_TO_MODEL(cpu_id) == 0x2d || CPUID_TO_MODEL(cpu_id) == 0x2a || CPUID_TO_MODEL(cpu_id) == 0x3e || CPUID_TO_MODEL(cpu_id) == 0x3a) && (hw_mds_disable == 2 || hw_mds_disable == 3)) { /* * Nehalem, SandyBridge, IvyBridge */ CPU_FOREACH(i) { pc = pcpu_find(i); if (pc->pc_mds_buf == NULL) { pc->pc_mds_buf = malloc_domainset(672, M_TEMP, DOMAINSET_PREF(pc->pc_domain), M_WAITOK); bzero(pc->pc_mds_buf, 16); } } mds_handler = mds_handler_ivb; } else if (CPUID_TO_FAMILY(cpu_id) == 0x6 && (CPUID_TO_MODEL(cpu_id) == 0x3f || CPUID_TO_MODEL(cpu_id) == 0x3c || CPUID_TO_MODEL(cpu_id) == 0x45 || CPUID_TO_MODEL(cpu_id) == 0x46 || CPUID_TO_MODEL(cpu_id) == 0x56 || CPUID_TO_MODEL(cpu_id) == 0x4f || CPUID_TO_MODEL(cpu_id) == 0x47 || CPUID_TO_MODEL(cpu_id) == 0x3d) && (hw_mds_disable == 2 || hw_mds_disable == 3)) { /* * Haswell, Broadwell */ CPU_FOREACH(i) { pc = pcpu_find(i); if (pc->pc_mds_buf == NULL) { pc->pc_mds_buf = malloc_domainset(1536, M_TEMP, DOMAINSET_PREF(pc->pc_domain), M_WAITOK); bzero(pc->pc_mds_buf, 16); } } mds_handler = mds_handler_bdw; } else if (CPUID_TO_FAMILY(cpu_id) == 0x6 && ((CPUID_TO_MODEL(cpu_id) == 0x55 && (cpu_id & CPUID_STEPPING) <= 5) || CPUID_TO_MODEL(cpu_id) == 0x4e || CPUID_TO_MODEL(cpu_id) == 0x5e || (CPUID_TO_MODEL(cpu_id) == 0x8e && (cpu_id & CPUID_STEPPING) <= 0xb) || (CPUID_TO_MODEL(cpu_id) == 0x9e && (cpu_id & CPUID_STEPPING) <= 0xc)) && (hw_mds_disable == 2 || hw_mds_disable == 3)) { /* * Skylake, KabyLake, CoffeeLake, WhiskeyLake, * CascadeLake */ CPU_FOREACH(i) { pc = pcpu_find(i); if (pc->pc_mds_buf == NULL) { pc->pc_mds_buf = malloc_domainset(6 * 1024, M_TEMP, DOMAINSET_PREF(pc->pc_domain), M_WAITOK); b64 = (vm_offset_t)malloc_domainset(64 + 63, M_TEMP, DOMAINSET_PREF(pc->pc_domain), M_WAITOK); pc->pc_mds_buf64 = (void *)roundup2(b64, 64); bzero(pc->pc_mds_buf64, 64); } } xcr0 = rxcr(0); if ((xcr0 & XFEATURE_ENABLED_ZMM_HI256) != 0 && (cpu_stdext_feature & CPUID_STDEXT_AVX512DQ) != 0) mds_handler = mds_handler_skl_avx512; else if ((xcr0 & XFEATURE_ENABLED_AVX) != 0 && (cpu_feature2 & CPUID2_AVX) != 0) mds_handler = mds_handler_skl_avx; else mds_handler = mds_handler_skl_sse; } else if (CPUID_TO_FAMILY(cpu_id) == 0x6 && ((CPUID_TO_MODEL(cpu_id) == 0x37 || CPUID_TO_MODEL(cpu_id) == 0x4a || CPUID_TO_MODEL(cpu_id) == 0x4c || CPUID_TO_MODEL(cpu_id) == 0x4d || CPUID_TO_MODEL(cpu_id) == 0x5a || CPUID_TO_MODEL(cpu_id) == 0x5d || CPUID_TO_MODEL(cpu_id) == 0x6e || CPUID_TO_MODEL(cpu_id) == 0x65 || CPUID_TO_MODEL(cpu_id) == 0x75 || CPUID_TO_MODEL(cpu_id) == 0x1c || CPUID_TO_MODEL(cpu_id) == 0x26 || CPUID_TO_MODEL(cpu_id) == 0x27 || CPUID_TO_MODEL(cpu_id) == 0x35 || CPUID_TO_MODEL(cpu_id) == 0x36 || CPUID_TO_MODEL(cpu_id) == 0x7a))) { /* Silvermont, Airmont */ CPU_FOREACH(i) { pc = pcpu_find(i); if (pc->pc_mds_buf == NULL) pc->pc_mds_buf = malloc(256, M_TEMP, M_WAITOK); } mds_handler = mds_handler_silvermont; } else { hw_mds_disable = 0; mds_handler = mds_handler_void; } } static void hw_mds_recalculate_boot(void *arg __unused) { hw_mds_recalculate(); } SYSINIT(mds_recalc, SI_SUB_SMP, SI_ORDER_ANY, hw_mds_recalculate_boot, NULL); static int sysctl_mds_disable_handler(SYSCTL_HANDLER_ARGS) { int error, val; val = hw_mds_disable; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (val < 0 || val > 3) return (EINVAL); hw_mds_disable = val; hw_mds_recalculate(); return (0); } SYSCTL_PROC(_hw, OID_AUTO, mds_disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, sysctl_mds_disable_handler, "I", "Microarchitectural Data Sampling Mitigation " "(0 - off, 1 - on VERW, 2 - on SW, 3 - on AUTO)"); SYSCTL_PROC(_machdep_mitigations_mds, OID_AUTO, disable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, sysctl_mds_disable_handler, "I", "Microarchitectural Data Sampling Mitigation " "(0 - off, 1 - on VERW, 2 - on SW, 3 - on AUTO)"); /* * Intel Transactional Memory Asynchronous Abort Mitigation * CVE-2019-11135 */ int x86_taa_enable; int x86_taa_state; enum { TAA_NONE = 0, /* No mitigation enabled */ TAA_TSX_DISABLE = 1, /* Disable TSX via MSR */ TAA_VERW = 2, /* Use VERW mitigation */ TAA_AUTO = 3, /* Automatically select the mitigation */ /* The states below are not selectable by the operator */ TAA_TAA_UC = 4, /* Mitigation present in microcode */ TAA_NOT_PRESENT = 5 /* TSX is not present */ }; static void taa_set(bool enable, bool all) { x86_msr_op(MSR_IA32_TSX_CTRL, (enable ? MSR_OP_OR : MSR_OP_ANDNOT) | (all ? MSR_OP_RENDEZVOUS_ALL : MSR_OP_LOCAL), IA32_TSX_CTRL_RTM_DISABLE | IA32_TSX_CTRL_TSX_CPUID_CLEAR, NULL); } void x86_taa_recalculate(void) { static int taa_saved_mds_disable = 0; int taa_need = 0, taa_state = 0; int mds_disable = 0, need_mds_recalc = 0; /* Check CPUID.07h.EBX.HLE and RTM for the presence of TSX */ if ((cpu_stdext_feature & CPUID_STDEXT_HLE) == 0 || (cpu_stdext_feature & CPUID_STDEXT_RTM) == 0) { /* TSX is not present */ x86_taa_state = TAA_NOT_PRESENT; return; } /* Check to see what mitigation options the CPU gives us */ if (cpu_ia32_arch_caps & IA32_ARCH_CAP_TAA_NO) { /* CPU is not suseptible to TAA */ taa_need = TAA_TAA_UC; } else if (cpu_ia32_arch_caps & IA32_ARCH_CAP_TSX_CTRL) { /* * CPU can turn off TSX. This is the next best option * if TAA_NO hardware mitigation isn't present */ taa_need = TAA_TSX_DISABLE; } else { /* No TSX/TAA specific remedies are available. */ if (x86_taa_enable == TAA_TSX_DISABLE) { if (bootverbose) printf("TSX control not available\n"); return; } else taa_need = TAA_VERW; } /* Can we automatically take action, or are we being forced? */ if (x86_taa_enable == TAA_AUTO) taa_state = taa_need; else taa_state = x86_taa_enable; /* No state change, nothing to do */ if (taa_state == x86_taa_state) { if (bootverbose) printf("No TSX change made\n"); return; } /* Does the MSR need to be turned on or off? */ if (taa_state == TAA_TSX_DISABLE) taa_set(true, true); else if (x86_taa_state == TAA_TSX_DISABLE) taa_set(false, true); /* Does MDS need to be set to turn on VERW? */ if (taa_state == TAA_VERW) { taa_saved_mds_disable = hw_mds_disable; mds_disable = hw_mds_disable = 1; need_mds_recalc = 1; } else if (x86_taa_state == TAA_VERW) { mds_disable = hw_mds_disable = taa_saved_mds_disable; need_mds_recalc = 1; } if (need_mds_recalc) { hw_mds_recalculate(); if (mds_disable != hw_mds_disable) { if (bootverbose) printf("Cannot change MDS state for TAA\n"); /* Don't update our state */ return; } } x86_taa_state = taa_state; return; } static void taa_recalculate_boot(void * arg __unused) { x86_taa_recalculate(); } SYSINIT(taa_recalc, SI_SUB_SMP, SI_ORDER_ANY, taa_recalculate_boot, NULL); SYSCTL_NODE(_machdep_mitigations, OID_AUTO, taa, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "TSX Asynchronous Abort Mitigation"); static int sysctl_taa_handler(SYSCTL_HANDLER_ARGS) { int error, val; val = x86_taa_enable; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (val < TAA_NONE || val > TAA_AUTO) return (EINVAL); x86_taa_enable = val; x86_taa_recalculate(); return (0); } SYSCTL_PROC(_machdep_mitigations_taa, OID_AUTO, enable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, sysctl_taa_handler, "I", "TAA Mitigation enablement control " "(0 - off, 1 - disable TSX, 2 - VERW, 3 - on AUTO)"); static int sysctl_taa_state_handler(SYSCTL_HANDLER_ARGS) { const char *state; switch (x86_taa_state) { case TAA_NONE: state = "inactive"; break; case TAA_TSX_DISABLE: state = "TSX disabled"; break; case TAA_VERW: state = "VERW"; break; case TAA_TAA_UC: state = "Mitigated in microcode"; break; case TAA_NOT_PRESENT: state = "TSX not present"; break; default: state = "unknown"; } return (SYSCTL_OUT(req, state, strlen(state))); } SYSCTL_PROC(_machdep_mitigations_taa, OID_AUTO, state, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_taa_state_handler, "A", "TAA Mitigation state"); int __read_frequently cpu_flush_rsb_ctxsw; SYSCTL_INT(_machdep_mitigations, OID_AUTO, flush_rsb_ctxsw, CTLFLAG_RW | CTLFLAG_NOFETCH, &cpu_flush_rsb_ctxsw, 0, "Flush Return Stack Buffer on context switch"); SYSCTL_NODE(_machdep_mitigations, OID_AUTO, rngds, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "MCU Optimization, disable RDSEED mitigation"); int x86_rngds_mitg_enable = 1; void x86_rngds_mitg_recalculate(bool all_cpus) { if ((cpu_stdext_feature3 & CPUID_STDEXT3_MCUOPT) == 0) return; x86_msr_op(MSR_IA32_MCU_OPT_CTRL, (x86_rngds_mitg_enable ? MSR_OP_OR : MSR_OP_ANDNOT) | (all_cpus ? MSR_OP_RENDEZVOUS_ALL : MSR_OP_LOCAL), IA32_RNGDS_MITG_DIS, NULL); } static int sysctl_rngds_mitg_enable_handler(SYSCTL_HANDLER_ARGS) { int error, val; val = x86_rngds_mitg_enable; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); x86_rngds_mitg_enable = val; x86_rngds_mitg_recalculate(true); return (0); } SYSCTL_PROC(_machdep_mitigations_rngds, OID_AUTO, enable, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NOFETCH | CTLFLAG_MPSAFE, NULL, 0, sysctl_rngds_mitg_enable_handler, "I", "MCU Optimization, disabling RDSEED mitigation control " "(0 - mitigation disabled (RDSEED optimized), 1 - mitigation enabled)"); static int sysctl_rngds_state_handler(SYSCTL_HANDLER_ARGS) { const char *state; if ((cpu_stdext_feature3 & CPUID_STDEXT3_MCUOPT) == 0) { state = "Not applicable"; } else if (x86_rngds_mitg_enable == 0) { state = "RDSEED not serialized"; } else { state = "Mitigated"; } return (SYSCTL_OUT(req, state, strlen(state))); } SYSCTL_PROC(_machdep_mitigations_rngds, OID_AUTO, state, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_rngds_state_handler, "A", "MCU Optimization state"); /* * Enable and restore kernel text write permissions. * Callers must ensure that disable_wp()/restore_wp() are executed * without rescheduling on the same core. */ bool disable_wp(void) { u_int cr0; cr0 = rcr0(); if ((cr0 & CR0_WP) == 0) return (false); load_cr0(cr0 & ~CR0_WP); return (true); } void restore_wp(bool old_wp) { if (old_wp) load_cr0(rcr0() | CR0_WP); } bool acpi_get_fadt_bootflags(uint16_t *flagsp) { #ifdef DEV_ACPI ACPI_TABLE_FADT *fadt; vm_paddr_t physaddr; physaddr = acpi_find_table(ACPI_SIG_FADT); if (physaddr == 0) return (false); fadt = acpi_map_table(physaddr, ACPI_SIG_FADT); if (fadt == NULL) return (false); *flagsp = fadt->BootFlags; acpi_unmap_table(fadt); return (true); #else return (false); #endif } DEFINE_IFUNC(, uint64_t, rdtsc_ordered, (void)) { bool cpu_is_amd = cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_HYGON; if ((amd_feature & AMDID_RDTSCP) != 0) return (rdtscp); else if ((cpu_feature & CPUID_SSE2) != 0) return (cpu_is_amd ? rdtsc_ordered_mfence : rdtsc_ordered_lfence); else return (rdtsc); } diff --git a/sys/x86/x86/mp_watchdog.c b/sys/x86/x86/mp_watchdog.c deleted file mode 100644 index 0823f90d060e..000000000000 --- a/sys/x86/x86/mp_watchdog.c +++ /dev/null @@ -1,212 +0,0 @@ -/*- - * Copyright (c) 2004 Robert N. M. Watson - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -#include "opt_mp_watchdog.h" -#include "opt_sched.h" - -#ifdef SCHED_ULE -#error MP_WATCHDOG cannot currently be used with SCHED_ULE -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * mp_watchdog hijacks the idle thread on a specified CPU, prevents new work - * from being scheduled there, and uses it as a "watchdog" to detect kernel - * failure on other CPUs. This is made reasonable by inclusion of logical - * processors in Xeon hardware. The watchdog is configured by setting the - * debug.watchdog sysctl/tunable to the CPU of interest. A callout will then - * begin executing reseting a timer that is gradually lowered by the watching - * thread. If the timer reaches 0, the watchdog fires by ether dropping - * directly to the debugger, or by sending an NMI IPI to the boot processor. - * This is a somewhat less efficient substitute for dedicated watchdog - * hardware, but can be quite an effective tool for debugging hangs. - * - * XXXRW: This should really use the watchdog(9)/watchdog(4) framework, but - * doesn't yet. - */ -static int watchdog_cpu = -1; -static int watchdog_dontfire = 1; -static int watchdog_timer = -1; -static int watchdog_nmi = 1; - -SYSCTL_INT(_debug, OID_AUTO, watchdog_nmi, CTLFLAG_RWTUN, &watchdog_nmi, 0, - "IPI the boot processor with an NMI to enter the debugger"); - -static struct callout watchdog_callout; - -static void watchdog_change(int wdcpu); - -/* - * Number of seconds before the watchdog will fire if the callout fails to - * reset the timer. - */ -#define WATCHDOG_THRESHOLD 10 - -static void -watchdog_init(void *arg) -{ - - callout_init(&watchdog_callout, 1); - if (watchdog_cpu != -1) - watchdog_change(watchdog_cpu); -} - -/* - * This callout resets a timer until the watchdog kicks in. It acquires some - * critical locks to make sure things haven't gotten wedged with those locks - * held. - */ -static void -watchdog_function(void *arg) -{ - - /* - * Since the timer ran, we must not be wedged. Acquire some critical - * locks to make sure. Then reset the timer. - */ - mtx_lock(&Giant); - watchdog_timer = WATCHDOG_THRESHOLD; - mtx_unlock(&Giant); - callout_reset(&watchdog_callout, 1 * hz, watchdog_function, NULL); -} -SYSINIT(watchdog_init, SI_SUB_DRIVERS, SI_ORDER_ANY, watchdog_init, NULL); - -static void -watchdog_change(int wdcpu) -{ - - if (wdcpu == -1 || wdcpu == 0xffffffff) { - /* - * Disable the watchdog. - */ - watchdog_cpu = -1; - watchdog_dontfire = 1; - callout_stop(&watchdog_callout); - printf("watchdog stopped\n"); - } else { - watchdog_timer = WATCHDOG_THRESHOLD; - watchdog_dontfire = 0; - watchdog_cpu = wdcpu; - callout_reset(&watchdog_callout, 1 * hz, watchdog_function, - NULL); - } -} - -/* - * This sysctl sets which CPU is the watchdog CPU. Set to -1 or 0xffffffff - * to disable the watchdog. - */ -static int -sysctl_watchdog(SYSCTL_HANDLER_ARGS) -{ - int error, temp; - - temp = watchdog_cpu; - error = sysctl_handle_int(oidp, &temp, 0, req); - if (error) - return (error); - - if (req->newptr != NULL) - watchdog_change(temp); - return (0); -} -SYSCTL_PROC(_debug, OID_AUTO, watchdog, - CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, - 0, 0, sysctl_watchdog, "I", - ""); - -/* - * Drop into the debugger by sending an IPI NMI to the boot processor. - */ -static void -watchdog_ipi_nmi(void) -{ - - /* - * Deliver NMI to the boot processor. Why not? - */ - lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE | - APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_NMI, - boot_cpu_id); - lapic_ipi_wait(-1); -} - -/* - * ap_watchdog() is called by the SMP idle loop code. It works on the same - * premise that the disabling of logical processors does: that if the cpu is - * idle, then it can ignore the world from then on, as nothing will be - * scheduled on it. Leaving aside multi-runqueue schedulers (SCHED_ULE) and - * explicit process migration (sched_bind()), this is not an unreasonable - * assumption. - */ -void -ap_watchdog(u_int cpuid) -{ - char old_pcomm[MAXCOMLEN + 1]; - struct proc *p; - - if (watchdog_cpu != cpuid) - return; - - printf("watchdog started on cpu %d\n", cpuid); - p = curproc; - bcopy(p->p_comm, old_pcomm, MAXCOMLEN + 1); - snprintf(p->p_comm, MAXCOMLEN + 1, "mp_watchdog cpu %d", cpuid); - while (1) { - DELAY(1000000); /* One second. */ - if (watchdog_cpu != cpuid) - break; - atomic_subtract_int(&watchdog_timer, 1); - if (watchdog_timer < 4) - printf("Watchdog timer: %d\n", watchdog_timer); - if (watchdog_timer == 0 && watchdog_dontfire == 0) { - printf("Watchdog firing!\n"); - watchdog_dontfire = 1; - if (watchdog_nmi) - watchdog_ipi_nmi(); - else - kdb_enter(KDB_WHY_WATCHDOG, "mp_watchdog"); - } - } - bcopy(old_pcomm, p->p_comm, MAXCOMLEN + 1); - printf("watchdog stopped on cpu %d\n", cpuid); -}