diff --git a/share/man/man4/amr.4 b/share/man/man4/amr.4 deleted file mode 100644 index 8ef14dfd1d9b..000000000000 --- a/share/man/man4/amr.4 +++ /dev/null @@ -1,246 +0,0 @@ -.\" -.\" Copyright (c) 2000 Jeroen Ruigrok van der Werven -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.Dd March 29, 2006 -.Dt AMR 4 -.Os -.Sh NAME -.Nm amr -.Nd MegaRAID SCSI/ATA/SATA RAID driver -.Sh SYNOPSIS -To compile this driver into the kernel, -place the following lines in your -kernel configuration file: -.Bd -ragged -offset indent -.Cd "device pci" -.Cd "device scbus" -.Cd "device amr" -.Ed -.Pp -Alternatively, to load the driver as a -module at boot time, place the following line in -.Xr loader.conf 5 : -.Bd -literal -offset indent -amr_load="YES" -.Ed -.Sh DEPRECATION NOTICE -The -.Nm -driver is not present in -.Fx 13.0 . -.Sh DESCRIPTION -The -.Nm -driver provides support for LSI Logic MegaRAID SCSI, ATA and SATA -RAID controllers and legacy American Megatrends MegaRAID -SCSI RAID controllers, including models relabeled -and sold by Dell and Hewlett-Packard. -.Pp -LSI MegaRAID SAS controllers are supported by -.Xr mfi 4 -and will not work with this driver. -.Sh HARDWARE -Controllers supported by the -.Nm -driver include: -.Pp -.Bl -bullet -compact -.It -MegaRAID SATA 150-4 -.It -MegaRAID SATA 150-6 -.It -MegaRAID SATA 300-4X -.It -MegaRAID SATA 300-8X -.It -MegaRAID SCSI 320-1E -.It -MegaRAID SCSI 320-2E -.It -MegaRAID SCSI 320-4E -.It -MegaRAID SCSI 320-0X -.It -MegaRAID SCSI 320-2X -.It -MegaRAID SCSI 320-4X -.It -MegaRAID SCSI 320-0 -.It -MegaRAID SCSI 320-1 -.It -MegaRAID SCSI 320-2 -.It -MegaRAID SCSI 320-4 -.It -MegaRAID Series 418 -.It -MegaRAID i4 133 RAID -.It -MegaRAID Elite 1500 (Series 467) -.It -MegaRAID Elite 1600 (Series 493) -.It -MegaRAID Elite 1650 (Series 4xx) -.It -MegaRAID Enterprise 1200 (Series 428) -.It -MegaRAID Enterprise 1300 (Series 434) -.It -MegaRAID Enterprise 1400 (Series 438) -.It -MegaRAID Enterprise 1500 (Series 467) -.It -MegaRAID Enterprise 1600 (Series 471) -.It -MegaRAID Express 100 (Series 466WS) -.It -MegaRAID Express 200 (Series 466) -.It -MegaRAID Express 300 (Series 490) -.It -MegaRAID Express 500 (Series 475) -.It -Dell PERC -.It -Dell PERC 2/SC -.It -Dell PERC 2/DC -.It -Dell PERC 3/DCL -.It -Dell PERC 3/QC -.It -Dell PERC 4/DC -.It -Dell PERC 4/IM -.It -Dell PERC 4/SC -.It -Dell PERC 4/Di -.It -Dell PERC 4e/DC -.It -Dell PERC 4e/Di -.It -Dell PERC 4e/Si -.It -Dell PERC 4ei -.It -HP NetRAID-1/Si -.It -HP NetRAID-3/Si (D4943A) -.It -HP Embedded NetRAID -.It -Intel RAID Controller SRCS16 -.It -Intel RAID Controller SRCU42X -.El -.Sh DIAGNOSTICS -.Ss Driver initialisation/shutdown phase -.Bl -diag -.It amr%d: memory window not available -.It amr%d: I/O window not available -.Pp -The PCI BIOS did not allocate resources necessary for the correct operation of -the controller. -The driver cannot attach to this controller. -.It amr%d: busmaster bit not set, enabling -.Pp -The PCI BIOS did not enable busmaster DMA, -which is required for the correct operation of the controller. -The driver has enabled this bit and initialisation will proceed. -.It amr%d: can't allocate register window -.It amr%d: can't allocate interrupt -.It amr%d: can't set up interrupt -.It amr%d: can't allocate parent DMA tag -.It amr%d: can't allocate buffer DMA tag -.It amr%d: can't allocate scatter/gather DMA tag -.It amr%d: can't allocate s/g table -.It amr%d: can't allocate mailbox tag -.It amr%d: can't allocate mailbox memory -.Pp -A resource allocation error occurred while initialising the driver; -initialisation has failed and the driver will not attach to this controller. -.It amr%d: can't obtain configuration data from controller -.It amr%d: can't obtain product data from controller -.Pp -The driver was unable to obtain vital configuration data from the controller. -Initialisation has failed and the driver will not attach to this controller. -.It amr%d: can't establish configuration hook -.It amr%d: can't scan controller for drives -.Pp -The scan for logical drives managed by the controller failed. -No drives will be attached. -.It amr%d: device_add_child failed -.It amr%d: bus_generic_attach returned %d -.Pp -Creation of the logical drive instances failed; -attachment of one or more logical drives may have been aborted. -.It amr%d: flushing cache... -.Pp -The controller cache is being flushed prior to shutdown or detach. -.El -.Ss Operational diagnostics -.Bl -diag -.It amr%d: I/O beyond end of unit (%u,%d > %u) -.Pp -A partitioning error or disk corruption has caused an I/O request -beyond the end of the logical drive. -This may also occur if FlexRAID Virtual Sizing is enabled and -an I/O operation is attempted on a portion of the virtual drive -beyond the actual capacity available. -.It amr%d: polled command timeout -.Pp -An initialisation command timed out. -The initialisation process may fail as a result. -.It amr%d: bad slot %d completed -.Pp -The controller reported completion of a command that the driver did not issue. -This may result in data corruption, -and suggests a hardware or firmware problem with the system or controller. -.It amr%d: I/O error - %x -.Pp -An I/O error has occurred. -.El -.Sh SEE ALSO -.Xr cd 4 , -.Xr da 4 , -.Xr mfi 4 , -.Xr sa 4 , -.Xr scsi 4 -.Sh AUTHORS -.An -nosplit -The -.Nm -driver was written by -.An Mike Smith Aq Mt msmith@FreeBSD.org . -.Pp -This manual page was written by -.An Mike Smith Aq Mt msmith@FreeBSD.org -and -.An Jeroen Ruigrok van der Werven Aq Mt asmodai@FreeBSD.org . diff --git a/sys/amd64/conf/GENERIC b/sys/amd64/conf/GENERIC index afd386f5913e..9d15833e472a 100644 --- a/sys/amd64/conf/GENERIC +++ b/sys/amd64/conf/GENERIC @@ -1,407 +1,406 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/amd64 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu HAMMER ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support options SCHED_ULE # ULE scheduler options NUMA # Non-Uniform Memory Architecture support options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options ROUTE_MPATH # Multipath routing support options FIB_ALGO # Modular fib lookups options TCP_OFFLOAD # TCP offload options TCP_BLACKBOX # Enhanced TCP event logging options TCP_HHOOK # hhook(9) framework for TCP options TCP_RFC7413 # TCP Fast Open options SCTP_SUPPORT # Allow kldload of SCTP options KERN_TLS # TLS transmit & receive offload options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_RAID # Soft RAID functionality. options GEOM_LABEL # Provides labelization options EFIRT # EFI Runtime Services support options COMPAT_FREEBSD32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options COMPAT_FREEBSD12 # Compatible with FreeBSD12 options COMPAT_FREEBSD13 # Compatible with FreeBSD13 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_FRAME # Ensure frames are compiled in options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options BUF_TRACKING # Track buffer history options DDB # Support DDB. options FULL_BUF_TRACKING # Track more buffer history options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options QUEUE_MACRO_DEBUG_TRASH # Trash queue(2) internal pointers on invalidation options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default # Kernel Sanitizers #options COVERAGE # Generic kernel coverage. Used by KCOV #options KCOV # Kernel Coverage Sanitizer # Warning: KUBSAN can result in a kernel too large for loader to load #options KUBSAN # Kernel Undefined Behavior Sanitizer #options KCSAN # Kernel Concurrency Sanitizer # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options DEBUGNET # debugnet networking options NETDUMP # netdump(4) client support options NETGDB # netgdb(4) client support # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel options EARLY_AP_STARTUP # CPU frequency control device cpufreq # Bus support. device acpi device smbios options IOMMU device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support options COMPAT_LINUXKPI # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC # Floppy drives device fdc # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI-Logic MPT-Fusion 3 device sym # NCR/Symbios Logic device isci # Intel C600 SAS controller device ocs_fc # Emulex FC adapters device pvscsi # VMware PVSCSI # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # RAID controllers interfaced to the SCSI subsystem -device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device ciss # Compaq Smart RAID 5* device ips # IBM (Adaptec) ServeRAID device twa # 3ware 9000 series PATA/SATA RAID device smartpqi # Microsemi smartpqi driver device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device aacraid # Adaptec by PMC RAID device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device pmspcv # PMC-Sierra SAS/SATA Controller driver #XXX pointer/int warnings #device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespaces as disks, depends on nvme # Intel Volume Management Device (VMD) support device vmd # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver options VESA # Add support for VESA BIOS Extensions (VBE) device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options SC_PIXEL_MODE # add support for the raster text mode # vt is the new video console driver device vt device vt_vga device vt_efifb device vt_vbefb device agp # support several AGP chipsets # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da device puc # Multi I/O cards and multi-channel UARTs # PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure device iflib device em # Intel PRO/1000 Gigabit Ethernet Family device igc # Intel I225 2.5G Ethernet device ix # Intel PRO/10GbE PCIE PF Ethernet device ixv # Intel PRO/10GbE PCIE VF Ethernet device ixl # Intel 700 Series Physical Function device iavf # Intel Adaptive Virtual Function device ice # Intel 800 Series Physical Function device vmx # VMware VMXNET3 Ethernet device axp # AMD EPYC integrated NIC (requires miibus) # PCI Ethernet NICs. device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet # Nvidia/Mellanox Connect-X 4 and later, Ethernet only # mlx5ib requires ibcore infra and is not included by default device mlx5 # Base driver device mlxfw # Firmware update device mlx5en # Ethernet driver # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) device gem # Sun GEM/Sun ERI/Apple GMAC device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nfe # nVidia nForce MCP on-board Ethernet device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later device ath_rate_sample # SampleRate tx rate control for ath #device bwi # Broadcom BCM430x/BCM431x wireless NICs. #device bwn # Broadcom BCM43xx wireless NICs. device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device ral # Ralink Technology RT2500 wireless NICs. device wpi # Intel 3945ABG wireless NICs. # Pseudo devices. device crypto # core crypto support device aesni # AES-NI OpenCrypto module device loop # Network loopback device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device ether # Ethernet support device vlan # 802.1Q VLAN support device tuntap # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module device xz # lzma decompression # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device xhci # XHCI PCI->USB interface (USB 3.0) device usb # USB Bus (required) device ukbd # Keyboard device umass # Disks/Mass storage - Requires scbus and da # Sound support device sound # Generic sound driver (required) device snd_cmi # CMedia CMI8338/CMI8738 device snd_csa # Crystal Semiconductor CS461x/428x device snd_emu10kx # Creative SoundBlaster Live! and Audigy device snd_es137x # Ensoniq AudioPCI ES137x device snd_hda # Intel High Definition Audio device snd_ich # Intel, NVidia and other ICH AC'97 Audio device snd_via8233 # VIA VT8233x Audio # MMC/SD device mmc # MMC/SD bus device mmcsd # MMC/SD memory card device sdhci # Generic PCI SD Host Controller device rtsx # Realtek SD card reader # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # HyperV drivers and enhancement support device hyperv # HyperV drivers # Xen HVM Guest Optimizations # NOTE: XENHVM depends on xenpci and xentimer. # They must be added or removed together. options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver device xentimer # Xen x86 PV timer device # Netmap provides direct access to TX/RX rings on supported NICs device netmap # netmap(4) support # evdev interface options EVDEV_SUPPORT # evdev support in legacy drivers device evdev # input event device support device uinput # install /dev/uinput cdev # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support options IICHID_SAMPLING # Workaround missing GPIO INTR support diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 2221f8feb7dd..f0546dfca101 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1,2833 +1,2831 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'envvar hint.' should go into your hints file. # See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # To statically compile in device wiring instead of /boot/device.hints #hints "LINT.hints" # Default places to look for devices. # Use the following to compile in values accessible to the kernel # through getenv() (or kenv(1) in userland). The format of the file # is 'variable=value', see kenv(1) # #env "LINT.env" # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # # MAXPHYS and DFLTPHYS # # These are the maximal and safe 'raw' I/O block device access sizes. # Reads and writes will be split into MAXPHYS chunks for known good # devices and DFLTPHYS for the rest. Some applications have better # performance with larger raw I/O access sizes. Note that certain VM # parameters are derived from these values and making them too large # can make an unbootable kernel. # # The defaults are 64K and 128K respectively. options DFLTPHYS=(64*1024) options MAXPHYS=(128*1024) # This allows you to actually store this configuration file into # the kernel binary itself. See config(8) for more details. # options INCLUDE_CONFIG_FILE # Include this file in kernel # # Compile-time defaults for various boot parameters # options BOOTVERBOSE=1 options BOOTHOWTO=RB_MULTIPLE # # Compile-time defaults for dmesg boot tagging # # Default boot tag; may use 'kern.boot_tag' loader tunable to override. The # current boot's tag is also exposed via the 'kern.boot_tag' sysctl. options BOOT_TAG=\"\" # Maximum boot tag size the kernel's static buffer should accomodate. Maximum # size for both BOOT_TAG and the assocated tunable. options BOOT_TAG_SZ=32 options GEOM_BDE # Disk encryption. options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_GATE # Userland services. options GEOM_JOURNAL # Journaling. options GEOM_LABEL # Providers labelization. options GEOM_LINUX_LVM # Linux LVM2 volumes options GEOM_MAP # Map based partitioning options GEOM_MIRROR # Disk mirroring. options GEOM_MULTIPATH # Disk multipath options GEOM_NOP # Test class. options GEOM_PART_APM # Apple partitioning options GEOM_PART_BSD # BSD disklabel options GEOM_PART_BSD64 # BSD disklabel64 options GEOM_PART_EBR # Extended Boot Records options GEOM_PART_GPT # GPT partitioning options GEOM_PART_LDM # Logical Disk Manager options GEOM_PART_MBR # MBR partitioning options GEOM_PART_VTOC8 # SMI VTOC8 disk label options GEOM_RAID # Soft RAID functionality. options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_UZIP # Read-only compressed disks options GEOM_VINUM # Vinum logical volume manager options GEOM_VIRSTOR # Virtual storage. options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE provides significant performance advantages over 4BSD on many # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues # and scheduler locks. It also has a stronger notion of interactivity # which leads to better responsiveness even on uniprocessor machines. This # is the default scheduler. # # SCHED_STATS is a debugging option which keeps some stats in the sysctl # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. # options SCHED_4BSD options SCHED_STATS #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # EARLY_AP_STARTUP releases the Application Processors earlier in the # kernel startup process (before devices are probed) rather than at the # end. This is a temporary option for use during the transition from # late to early AP startup. options EARLY_AP_STARTUP # MAXCPU defines the maximum number of CPUs that can boot in the system. # A default value should be already present, for every architecture. options MAXCPU=32 # NUMA enables use of Non-Uniform Memory Access policies in various kernel # subsystems. options NUMA # MAXMEMDOM defines the maximum number of memory domains that can boot in the # system. A default value should already be defined by every architecture. options MAXMEMDOM=2 # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin # if the thread that currently owns the rwlock is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_RWLOCKS # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that # currently owns the sx lock is executing on another CPU. # This behavior is enabled by default, so this option can be used to # disable it. options NO_ADAPTIVE_SX # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SX_NOINLINE forces sx lock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options SX_NOINLINE # SMP Debugging Options: # # CALLOUT_PROFILING enables rudimentary profiling of the callwheel data # structure used as backend in callout(9). # PREEMPTION allows the threads that are in the kernel to be preempted by # higher priority [interrupt] threads. It helps with interactivity # and allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues as well as sleep wait message # frequency. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # UMTX_PROFILING enables rudimentary profiling of the hash table used # to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. options LOCK_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for the callout(9) backend. options CALLOUT_PROFILING # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING options UMTX_PROFILING # Debugging traces for epoch(9) misuse options EPOCH_TRACE ##################################################################### # COMPATIBILITY OPTIONS # Old tty interface. options COMPAT_43TTY # Note that as a general rule, COMPAT_FREEBSD depends on # COMPAT_FREEBSD, COMPAT_FREEBSD, etc. # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # Enable FreeBSD7 compatibility syscalls options COMPAT_FREEBSD7 # Enable FreeBSD9 compatibility syscalls options COMPAT_FREEBSD9 # Enable FreeBSD10 compatibility syscalls options COMPAT_FREEBSD10 # Enable FreeBSD11 compatibility syscalls options COMPAT_FREEBSD11 # Enable FreeBSD12 compatibility syscalls options COMPAT_FREEBSD12 # Enable FreeBSD13 compatibility syscalls options COMPAT_FREEBSD13 # Enable Linux Kernel Programming Interface options COMPAT_LINUXKPI # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # Trashes list pointers when they become invalid (i.e., the element is # removed from a list). Relatively inexpensive to enable. # options QUEUE_MACRO_DEBUG_TRASH # # Stores information about the last caller to modify the list object # in the list object. Requires additional memory overhead. # #options QUEUE_MACRO_DEBUG_TRACE # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # Enable textdump by default, this disables kernel core dumps. # options TEXTDUMP_PREFERRED # # Enable extra debug messages while performing textdumps. # options TEXTDUMP_VERBOSE # # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the # resulting kernel. options NO_SYSCTL_DESCR # # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9) # allocations that are smaller than a page. The purpose is to isolate # different malloc types into hash classes, so that any buffer # overruns or use-after-free will usually only affect memory from # malloc types in that hash class. This is purely a debugging tool; # by varying the hash function and tracking which hash class was # corrupted, the intersection of the hash classes from each instance # will point to a single malloc type that is being misused. At this # point inspection or memguard(9) can be used to catch the offending # code. # options MALLOC_DEBUG_MAXZONES=8 # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # EARLY_PRINTF enables support for calling a special printf (eprintf) # very early in the kernel (before cn_init() has been called). This # should only be used for debugging purposes early in boot. Normally, # it is not defined. It is commented out here because this feature # isn't generally available. And the required eputc() isn't defined. # #options EARLY_PRINTF # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing facility imported from BSD/OS. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it may be an arbitrary number. # KTR_BOOT_ENTRIES defines the number of entries during the early boot, # before malloc(9) is functional. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. The layout of the string # passed as KTR_CPUMASK must match a series of bitmasks each of them # separated by the "," character (ie: # KTR_CPUMASK=0xAF,0xFFFFFFFFFFFFFFFF). KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details. # options KTR options KTR_BOOT_ENTRIES=1024 options KTR_ENTRIES=(128*1024) options KTR_COMPILE=(KTR_ALL) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as ktr(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The KASSERT_PANIC_OPTIONAL option allows kasserts to fire without # necessarily inducing a panic. Panic is the default behavior, but # runtime options can configure it either entirely off, or off with a # limit. # options KASSERT_PANIC_OPTIONAL # # The DIAGNOSTIC option is used to enable extra debugging information # and invariants checking. The added checks are too expensive or noisy # for an INVARIANTS kernel and thus are disabled by default. It is # expected that a kernel configured with DIAGNOSTIC will also have the # INVARIANTS option enabled. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # This option lets some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT # # STACK enables the stack(9) facility, allowing the capture of kernel stack # for the purpose of procinfo(1), etc. stack(9) will also be compiled in # automatically if DDB(4) is compiled into the kernel. # options STACK # # The NUM_CORE_FILES option specifies the limit for the number of core # files generated by a particular process, when the core file format # specifier includes the %I pattern. Since we only have 1 character for # the core count in the format string, meaning the range will be 0-9, the # maximum value allowed for this option is 10. # This core file limit can be adjusted at runtime via the debug.ncores # sysctl. # options NUM_CORE_FILES=5 # # The TSLOG option enables timestamped logging of events, especially # function entries/exits, in order to track the time spent by the kernel. # In particular, this is useful when investigating the early boot process, # before it is possible to use more sophisticated tools like DTrace. # The TSLOGSIZE option controls the size of the (preallocated, fixed # length) buffer used for storing these events (default: 262144 records). # # For security reasons the TSLOG option should not be enabled on systems # used in production. # options TSLOG options TSLOGSIZE=262144 ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to be configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_DEBUG options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families # options INET #Internet communications protocols options INET6 #IPv6 communications protocols # # Note if you include INET/INET6 or both options # You *must* define at least one of the congestion control # options or the compile will fail. Generic defines # options CC_NEWRENO. You also will need to specify # a default or the compile of your kernel will fail # as well. The string in default is the name of the # cc module as it would appear in the sysctl for # setting the default. Generic defines newreno # as shown below. # options CC_CDG options CC_CHD options CC_CUBIC options CC_DCTCP options CC_HD options CC_HTCP options CC_NEWRENO options CC_VEGAS options CC_DEFAULT=\"newreno\" options RATELIMIT # TX rate limiting support options ROUTETABLES=2 # allocated fibs up to 65536. default is 1. # but that would be a bad idea as they are large. options TCP_OFFLOAD # TCP offload support. options TCP_RFC7413 # TCP Fast Open options TCPHPTS # In order to enable IPSEC you MUST also add device crypto to # your kernel configuration options IPSEC #IP security (requires device crypto) # Option IPSEC_SUPPORT does not enable IPsec, but makes it possible to # load it as a kernel module. You still MUST add device crypto to your kernel # configuration. options IPSEC_SUPPORT #options IPSEC_DEBUG #debug for IP security # TLS framing and encryption/decryption of data over TCP sockets. options KERN_TLS # TLS transmit and receive offload # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # # SCTP is a NEW transport protocol defined by # RFC2960 updated by RFC3309 and RFC3758.. and # soon to have a new base RFC and many many more # extensions. This release supports all the extensions # including many drafts (most about to become RFC's). # It is the reference implementation of SCTP # and is quite well tested. # # Note YOU MUST have both INET and INET6 defined. # You don't have to enable V6, but SCTP is # dual stacked and so far we have not torn apart # the V6 and V4.. since an association can span # both a V6 and V4 address at the SAME time :-) # # The SCTP_SUPPORT option does not enable SCTP, but provides the necessary # support for loading SCTP as a loadable kernel module. # options SCTP options SCTP_SUPPORT # There are bunches of options: # this one turns on all sorts of # nastily printing that you can # do. It's all controlled by a # bit mask (settable by socket opt and # by sysctl). Including will not cause # logging until you set the bits.. but it # can be quite verbose.. so without this # option we don't do any of the tests for # bits and prints.. which makes the code run # faster.. if you are not debugging don't use. options SCTP_DEBUG # # All that options after that turn on specific types of # logging. You can monitor CWND growth, flight size # and all sorts of things. Go look at the code and # see. I have used this to produce interesting # charts and graphs as well :-> # # I have not yet committed the tools to get and print # the logs, I will do that eventually .. before then # if you want them send me an email rrs@freebsd.org # You basically must have ktr(4) enabled for these # and you then set the sysctl to turn on/off various # logging bits. Use ktrdump(8) to pull the log and run # it through a display program.. and graphs and other # things too. # options SCTP_LOCK_LOGGING options SCTP_MBUF_LOGGING options SCTP_MBCNT_LOGGING options SCTP_PACKET_LOGGING options SCTP_LTRACE_CHUNKS options SCTP_LTRACE_ERRORS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_CODEL # CoDel Active Queueing options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_FAIRQ # Fair Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CAR options NETGRAPH_CHECKSUM options NETGRAPH_CISCO options NETGRAPH_DEFLATE options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PATCH options NETGRAPH_PIPE options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_PRED1 options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_UI options NETGRAPH_VJC options NETGRAPH_VLAN # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM # Network stack virtualization. options VIMAGE options VNET_DEBUG # debug for VIMAGE # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. device loop # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured. device ether # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. device vlan # The `vxlan' device implements the VXLAN encapsulation of Ethernet # frames in UDP packets according to RFC7348. device vxlan # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # and ath drivers and will eventually be required by all 802.11 drivers. device wlan options IEEE80211_DEBUG #enable debugging msgs options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support options IEEE80211_SUPPORT_TDMA #enable TDMA support # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. device wlan_wep device wlan_ccmp device wlan_tkip # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. device wlan_xauth # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The 'wlan_amrr' device provides AMRR transmit rate control algorithm device wlan_acl device wlan_amrr # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. DHCP requires bpf. device bpf # The `netmap' device implements memory-mapped access to network # devices from userspace, enabling wire-speed packet capture and # generation even at 10Gbit/s. Requires support in the device # driver. Supported drivers are ixgbe, e1000, re. device netmap # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing and benchmarking purposes. device disc # The `epair' device implements a virtual back-to-back connected Ethernet # like interface pair. device epair # The `edsc' device implements a minimal Ethernet interface, # which discards all packets sent and receives none. device edsc # The `tuntap' device implements (user-)ppp, nos-tun(8) and a pty-like virtual # Ethernet interface device tuntap # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements GRE (Generic Routing Encapsulation) tunneling, # as specified in the RFC 2784 and RFC 2890. # The `me' device implements Minimal Encapsulation within IPv4 as # specified in the RFC 2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. device gif device gre device me options XBONEHACK # The `stf' device implements 6to4 encapsulation. device stf # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). device pf device pflog device pfsync # Bridge interface. device if_bridge # Common Address Redundancy Protocol. See carp(4) for more details. device carp # IPsec interface. device enc # Link aggregation interface. device lagg # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted and XORP. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. # # IPFIREWALL_NAT64 adds support for in kernel NAT64 in ipfw. # # IPFIREWALL_NPTV6 adds support for in kernel NPTv6 in ipfw. # # IPFIREWALL_PMOD adds support for protocols modification module. Currently # it supports only TCP MSS modification. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # PF_DEFAULT_TO_DROP causes the default pf(4) rule to deny everything. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # # TCPPCAP enables code which keeps the last n packets sent and received # on a TCP socket. # # TCP_BLACKBOX enables enhanced TCP event logging. # # TCP_HHOOK enables the hhook(9) framework hooks for the TCP stack. # # ROUTE_MPATH provides support for multipath routing. # options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_NAT #ipfw kernel nat support options IPFIREWALL_NAT64 #ipfw kernel NAT64 support options IPFIREWALL_NPTV6 #ipfw kernel IPv6 NPT support options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options PF_DEFAULT_TO_DROP #drop everything by default options TCPDEBUG options TCPPCAP options TCP_BLACKBOX options TCP_HHOOK options ROUTE_MPATH # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. # MBUF_PROFILING enables code to profile the mbuf chains # exiting the system (via participating interfaces) and # return a logarithmic histogram of monitored parameters # (e.g. packet size, wasted space, number of mbufs in chain). options MBUF_STRESS_TEST options MBUF_PROFILING # Statically link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_DNS options ACCEPT_FILTER_HTTP # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto' and either 'options IPSEC' or # 'options IPSEC_SUPPORT'. options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET, HZ/kern.hz should be at least 1000 for adequate response. options DUMMYNET # The DEBUGNET option enables a basic debug/panic-time networking API. It # is used by NETDUMP and NETGDB. options DEBUGNET # The NETDUMP option enables netdump(4) client support in the kernel. # This allows a panicking kernel to transmit a kernel dump to a remote host. options NETDUMP # The NETGDB option enables netgdb(4) support in the kernel. This allows a # panicking kernel to be debugged as a GDB remote over the network. options NETGDB ##################################################################### # FILESYSTEM OPTIONS # # Only the root filesystem needs to be statically compiled or preloaded # as module; everything else will be automatically loaded at mount # time. Some people still prefer to statically compile other # filesystems as well. # # NB: The UNION filesystem was known to be buggy in the past. It is now # being actively maintained, although there are still some issues being # resolved. # # One of these is mandatory: options FFS #Fast filesystem options NFSCL #Network File System client # The rest are optional: options AUTOFS #Automounter filesystem options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options FUSEFS #FUSEFS support module options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSLOCKD #Network Lock Manager options NFSD #Network Filesystem Server options KGSSAPI #Kernel GSSAPI implementation options NULLFS #NULL filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options TMPFS #Efficient memory filesystem options UDF #Universal Disk Format options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Gjournal-based UFS journaling support. options UFS_GJOURNAL # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. # This is now optional. # If not defined, the root filesystem passed in as the MFS_IMAGE makeoption # will be automatically embedded in the kernel during linking. Its exact size # will be consumed within the kernel. # If defined, the old way of embedding the filesystem in the kernel will be # used. That is to say MD_ROOT_SIZE KB will be allocated in the kernel and # later, the filesystem image passed in as the MFS_IMAGE makeoption will be # dd'd into the reserved space if it fits. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Write-protect the md root device so that it may not be mounted writeable. options MD_ROOT_READONLY # Allow to read MD image from external memory regions options MD_ROOT_MEM # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1). PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_DEBUG # Enable NFS Debugging # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # The system memory devices; /dev/mem, /dev/kmem device mem # The kernel symbol table device; /dev/ksyms device ksyms # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options UDF_ICONV ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_NTPD options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST # Support for Capsicum options CAPABILITIES # fine-grained rights on file descriptors options CAPABILITY_MODE # sandboxes with no global namespace access ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ (default # frequency of 1000 Hz or a period 1ms between calls). Virtual machine guests # use a value of 100. Lower values may lower overhead at the expense of accuracy # of scheduling, though the adaptive tick code reduces that overhead. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC # Enable support for generic feed-forward clocks in the kernel. # The feed-forward clock support is an alternative to the feedback oriented # ntpd/system clock approach, and is to be used with a feed-forward # synchronization algorithm such as the RADclock: # More info here: http://www.synclab.org/radclock options FFCLOCK ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: envvar hint.scbus.0.at="ahc0" envvar hint.scbus.1.at="ahc1" envvar hint.scbus.1.bus="0" envvar hint.scbus.3.at="ahc2" envvar hint.scbus.3.bus="0" envvar hint.scbus.2.at="ahc2" envvar hint.scbus.2.bus="1" envvar hint.da.0.at="scbus0" envvar hint.da.0.target="0" envvar hint.da.0.unit="0" envvar hint.da.1.at="scbus3" envvar hint.da.1.target="1" envvar hint.da.2.at="scbus2" envvar hint.da.2.target="3" envvar hint.sa.1.at="scbus1" envvar hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # The sg driver provides a passthrough API that is compatible with the # Linux SG driver. It will work in conjunction with the Linuxulator # to run linux SG apps. It can also stand on its own and provide # source level API compatibility for porting apps to FreeBSD. # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The pass driver provides a passthrough API to access the CAM subsystem. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #Enclosure Services (SES and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver device sg #Linux SCSI passthrough device ctl #CAM Target Layer # CAM OPTIONS: # debugging options: # CAMDEBUG Compile in all possible debugging. # CAM_DEBUG_COMPILE Debug levels to compile in. # CAM_DEBUG_FLAGS Debug levels to enable on boot. # CAM_DEBUG_BUS Limit debugging to the given bus. # CAM_DEBUG_TARGET Limit debugging to the given target. # CAM_DEBUG_LUN Limit debugging to the given lun. # CAM_DEBUG_DELAY Delay in us after printing each debug line. # CAM_IO_STATS Publish additional CAM device statics by sysctl # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_COMPILE=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_DELAY=1 options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device options CAM_IOSCHED_DYNAMIC options CAM_IO_STATS options CAM_TEST_FAILURE # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # a topology with the SES device that's on the box these drives are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #BSD-style compatibility pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 ##################################################################### # HARDWARE BUS CONFIGURATION # # PCI bus & PCI options: # device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # PCI, CardBus, and SD/MMC are self identifying buses, so # no hints are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev device kbdmux # keyboard multiplexer options KBDMUX_DFLT_KEYMAP # specify the built-in keymap makeoptions KBDMUX_DFLT_KEYMAP=it.iso options FB_DEBUG # Frame buffer debugging # Enable experimental features of the syscons terminal emulator (teken). options TEKEN_CONS25 # cons25-style terminal emulation options TEKEN_UTF8 # UTF-8 output handling # The vt video console driver. device vt options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys options VT_MAXWINDOWS=16 # Number of virtual consoles options VT_TWOBUTTON_MOUSE # Use right mouse button to paste # The following options set the maximum framebuffer size. options VT_FB_MAX_HEIGHT=480 options VT_FB_MAX_WIDTH=640 # The following options will let you change the default vt terminal colors. options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK) options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK) # # Optional devices: # # # SCSI host adapters: # # aacraid: Adaptec by PMC RAID controllers, Series 6/7/8 and upcoming # families. Container interface, CAM required. # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers # including the AMD Am53C974 (found on devices such as the Tekram # DC-390(T)) and the Sun ESP and FAS families of controllers # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpr: LSI-Logic MPT/Fusion Gen 3 # mps: LSI-Logic MPT/Fusion Gen 2 # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. device aacraid device ahc device ahd device esp device isp envvar hint.isp.0.disable="1" envvar hint.isp.0.role="3" envvar hint.isp.0.prefer_iomap="1" envvar hint.isp.0.prefer_memmap="1" envvar hint.isp.0.fwload_disable="1" envvar hint.isp.0.ignore_nvram="1" envvar hint.isp.0.fullduplex="1" envvar hint.isp.0.topology="lport" envvar hint.isp.0.topology="nport" envvar hint.isp.0.topology="lport-only" envvar hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. envvar hint.isp.0.portwnn="w50000000aaaa0000" envvar hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpr # LSI-Logic MPT-Fusion 3 device mps # LSI-Logic MPT-Fusion 2 device mpt # LSI-Logic MPT-Fusion device sym # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # Options used in dev/iscsi (Software iSCSI stack) # options ISCSI_INITIATOR_DEBUG=9 # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role # none=0 # target=1 # initiator=2 # both=3 (not supported currently) # # ISP_INTERNAL_TARGET (trivial internal disk target, for testing) # options ISP_DEFAULT_ROLES=0 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 -device amr # AMI MegaRAID -device amrp # SCSI Passthrough interface (optional, CAM req.) device mfi # LSI MegaRAID SAS device mfip # LSI MegaRAID SAS passthrough, requires CAM options MFI_DEBUG device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s # # 3ware ATA RAID # device twe # 3ware ATA RAID # # Serial ATA host controllers: # # ahci: Advanced Host Controller Interface (AHCI) compatible # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers # # These drivers are part of cam(4) subsystem. They supersede less featured # ata(4) subsystem drivers, supporting same hardware. device ahci device mvs device siis # # The 'ATA' driver supports all legacy ATA/ATAPI controllers, including # PC Card devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. # Alternatively, individual bus and chipset drivers may be chosen by using # the 'atacore' driver then selecting the drivers on a per vendor basis. # For example to build a system which only supports a VIA chipset, # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers. device ata # Modular ATA #device atacore # Core ATA functionality #device ataisa # ISA bus support #device atapci # PCI bus support; only generic chipset support # PCI ATA chipsets #device ataacard # ACARD #device ataacerlabs # Acer Labs Inc. (ALI) #device ataamd # American Micro Devices (AMD) #device ataati # ATI #device atacenatek # Cenatek #device atacypress # Cypress #device atacyrix # Cyrix #device atahighpoint # HighPoint #device ataintel # Intel #device ataite # Integrated Technology Inc. (ITE) #device atajmicron # JMicron #device atamarvell # Marvell #device atamicron # Micron #device atanational # National #device atanetcell # NetCell #device atanvidia # nVidia #device atapromise # Promise #device ataserverworks # ServerWorks #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD) #device atasis # Silicon Integrated Systems Corp.(SiS) #device atavia # VIA Technologies Inc. # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: envvar hint.ata.0.at="isa" envvar hint.ata.0.port="0x1f0" envvar hint.ata.0.irq="14" envvar hint.ata.1.at="isa" envvar hint.ata.1.port="0x170" envvar hint.ata.1.irq="15" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. options UART_POLL_FREQ # Set polling rate, used when hw has # no interrupt support (50 Hz default). # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. envvar hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. envvar hint.uart.0.port="0x3f8" envvar hint.uart.0.flags="0x10" envvar hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behavior. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK/DBG on the console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. There are FreeBSD extensions: # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Freescale/NXP QUad Integrated and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for many PCI Ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus" to the kernel config pulls in support for the generic # miibus API, the common support for for bit-bang'ing the MII and all # of the PHY drivers, including a generic one for PHYs that aren't # specifically handled by an individual driver. Support for specific # PHYs may be built by adding "device mii", "device mii_bitbang" if # needed by the NIC driver and then adding the appropriate PHY driver. device mii # Minimal MII support device mii_bitbang # Common module for bit-bang'ing the MII device miibus # MII support w/ bit-bang'ing and all PHYs device acphy # Altima Communications AC101 device amphy # AMD AM79c873 / Davicom DM910{1,2} device atphy # Attansic/Atheros F1 device axphy # Asix Semiconductor AX88x9x device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C device bnxt # Broadcom NetXtreme-C/NetXtreme-E device brgphy # Broadcom BCM54xx/57xx 1000baseTX device cgem # Cadence GEM Gigabit Ethernet device ciphy # Cicada/Vitesse CS/VSC8xxx device e1000phy # Marvell 88E1000 1000/100/10-BT device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces device icsphy # ICS ICS1889-1893 device ip1000phy # IC Plus IP1000A/IP1001 device jmphy # JMicron JMP211/JMP202 device lxtphy # Level One LXT-970 device nsgphy # NatSemi DP8361/DP83865/DP83891 device nsphy # NatSemi DP83840A device nsphyter # NatSemi DP83843/DP83815 device pnaphy # HomePNA device qsphy # Quality Semiconductor QS6612 device rdcphy # RDC Semiconductor R6040 device rgephy # RealTek 8169S/8110S/8211B/8211C device rlphy # RealTek 8139 device rlswitch # RealTek 8305 device smcphy # SMSC LAN91C111 device tdkphy # TDK 89Q2120 device truephy # LSI TruePHY device xmphy # XaQti XMAC II # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros # L2 PCI-Express FastEthernet controllers. # age: Support for gigabit ethernet adapters based on the Attansic/Atheros # L1 PCI express gigabit ethernet controllers. # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers. # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # bnxt: Broadcom NetXtreme-C and NetXtreme-E PCIe 10/25/50G Ethernet adapters. # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # bwi: Broadcom BCM430* and BCM431* family of wireless adapters. # bwn: Broadcom BCM43xx family of wireless adapters. # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn # cxgb: Chelsio T3 based 1GbE/10GbE PCIe Ethernet adapters. # cxgbe:Chelsio T4, T5, and T6-based 1/10/25/40/100GbE PCIe Ethernet # adapters. # cxgbev: Chelsio T4, T5, and T6-based PCIe Virtual Functions. # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # gem: Apple GMAC/Sun ERI/Sun GEM # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lio: Support for Cavium 23XX Ethernet adapters # malo: Marvell Libertas wireless NICs. # mwl: Marvell 88W8363 802.11n wireless NICs. # Requires the mwl firmware module # mwlfw: Marvell 88W8363 firmware # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, # 88E8055, 88E8056 and D-Link 560T/550SX. # mlxfw: Mellanox firmware update module. # mlx5: Mellanox ConnectX-4 and ConnectX-4 LX IB and Eth shared code module. # mlx5en:Mellanox ConnectX-4 and ConnectX-4 LX PCIe Ethernet adapters. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # oce: Emulex 10 Gbit adapters (OneConnect Ethernet) # ral: Ralink Technology IEEE 802.11 wireless adapter # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # rtwn: RealTek wireless adapters. # rtwnfw: RealTek wireless firmware. # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320. # vte: DM&P Vortex86 RDC R6040 Fast Ethernet # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # PCI Ethernet NICs that use the common MII bus controller code. device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) envvar hint.fxp.0.prefer_iomap="0" device gem # Apple GMAC/Sun ERI/Sun GEM device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device mlxfw # Mellanox firmware update module device mlx5 # Shared code module between IB and Ethernet device mlx5en # Mellanox ConnectX-4 and ConnectX-4 LX device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure device iflib device em # Intel Pro/1000 Gigabit Ethernet device ix # Intel Pro/10Gbe PCIE Ethernet device ixv # Intel Pro/10Gbe PCIE Ethernet VF # PCI Ethernet NICs. device cxgb # Chelsio T3 10 Gigabit Ethernet device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware device cxgbe # Chelsio T4-T6 1/10/25/40/100 Gigabit Ethernet device cxgbev # Chelsio T4-T6 Virtual Functions device le # AMD Am7900 LANCE and Am79C9xx PCnet device mxge # Myricom Myri-10G 10GbE NIC device oce # Emulex 10 GbE (OneConnect Ethernet) device ti # Alteon Networks Tigon I/II gigabit Ethernet # PCI IEEE 802.11 Wireless NICs device ath # Atheros pci/cardbus NIC's device ath_hal # pci/cardbus chip support #device ath_ar5210 # AR5210 chips #device ath_ar5211 # AR5211 chips #device ath_ar5212 # AR5212 chips #device ath_rf2413 #device ath_rf2417 #device ath_rf2425 #device ath_rf5111 #device ath_rf5112 #device ath_rf5413 #device ath_ar5416 # AR5416 chips # All of the AR5212 parts have a problem when paired with the AR71xx # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx # only. Details of the exact nature of the bug are sketchy, but some can be # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and # 6. This option enables this workaround. There is a performance penalty # for this work around, but without it things don't work at all. The DMA # from the card usually bursts 128 bytes, but on the affected CPUs, only # 4 are safe. options AH_RXCFG_SDMAMW_4BYTES #device ath_ar9160 # AR9160 chips #device ath_ar9280 # AR9280 chips #device ath_ar9285 # AR9285 chips device ath_rate_sample # SampleRate tx rate control for ath device bwi # Broadcom BCM430* BCM431* device bwn # Broadcom BCM43xx device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device mwlfw device ral # Ralink Technology RT2500 wireless NICs. device rtwn # Realtek wireless NICs device rtwnfw # Use sf_buf(9) interface for jumbo buffers on ti(4) controllers. #options TI_SF_BUF_JUMBO # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. # This option requires the TI_SF_BUF_JUMBO option above. #options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tell the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_hdspe: RME HDSPe AIO and RayDAT. # snd_ich: Intel ICH AC'97 and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_solo: ESS Solo-1x PCI. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_uaudio: USB audio. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. device snd_ad1816 device snd_als4000 device snd_atiixp device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_hdspe device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_uaudio device snd_via8233 device snd_via82c686 device snd_vibes # For non-PnP sound cards: envvar hint.pcm.0.at="isa" envvar hint.pcm.0.irq="10" envvar hint.pcm.0.drq="1" envvar hint.pcm.0.flags="0x0" envvar hint.sbc.0.at="isa" envvar hint.sbc.0.port="0x220" envvar hint.sbc.0.irq="5" envvar hint.sbc.0.drq="1" envvar hint.sbc.0.flags="0x15" envvar hint.gusc.0.at="isa" envvar hint.gusc.0.port="0x220" envvar hint.gusc.0.irq="5" envvar hint.gusc.0.drq="1" envvar hint.gusc.0.flags="0x13" # # Following options are intended for debugging/testing purposes: # # SND_DEBUG Enable extra debugging code that includes # sanity checking and possible increase of # verbosity. # # SND_DIAGNOSTIC Similar in a spirit of INVARIANTS/DIAGNOSTIC, # zero tolerance against inconsistencies. # # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled # in. This options enable most feeder converters # except for 8bit. WARNING: May bloat the kernel. # # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well. # # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic # as much as possible (the default trying to # avoid it). Possible slowdown. # # SND_PCM_64 (Only applicable for i386/32bit arch) # Process 32bit samples through 64bit # integer/arithmetic. Slight increase of dynamic # range at a cost of possible slowdown. # # SND_OLDSTEREO Only 2 channels are allowed, effectively # disabling multichannel processing. # options SND_DEBUG options SND_DIAGNOSTIC options SND_FEEDER_MULTIFORMAT options SND_FEEDER_FULL_MULTIFORMAT options SND_FEEDER_RATE_HP options SND_PCM_64 options SND_OLDSTEREO # # PC Card/PCMCIA and Cardbus # # cbb: pci/cardbus bridge implementing YENTA interface # cardbus: cardbus slots device cbb device cardbus # # MMC/SD # # mmc MMC/SD bus # mmcsd MMC/SD memory card # sdhci Generic PCI SD Host Controller # rtsx Realtek SD card reader (RTS5209, RTS5227, ...) device mmc device mmcsd device sdhci device rtsx # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # ismt Intel SMBus 2.0 controller chips (on Atom S1200, C2000) # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device ismt device smb # SMBus peripheral devices # # jedec_dimm Asset and temperature reporting for DDR3 and DDR4 DIMMs # device jedec_dimm # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # iicoc simple polling driver for OpenCores I2C controller # # Other: # iicbb generic I2C bit-banging code (needed by lpbb) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb # bitbang driver; implements i2c on a pair of gpio pins device ic device iic # userland access to i2c slave devices via ioctl(8) device iicsmb # smb over i2c bridge device iicoc # OpenCores I2C controller support # I2C bus multiplexer (mux) devices device iicmux # i2c mux core driver device iic_gpiomux # i2c mux hardware controlled via gpio pins device ltc430x # LTC4305 and LTC4306 i2c mux chips # I2C peripheral devices # device ad7418 # Analog Devices temp and voltage sensor device ads111x # Texas Instruments ADS101x and ADS111x ADCs device ds1307 # Dallas DS1307 RTC and compatible device ds13rtc # All Dallas/Maxim ds13xx chips device ds1672 # Dallas DS1672 RTC device ds3231 # Dallas DS3231 RTC + temperature device fan53555 # Fairchild Semi FAN53555/SYR82x Regulator device icee # AT24Cxxx and compatible EEPROMs device isl12xx # Intersil ISL12xx RTC device lm75 # LM75 compatible temperature sensor device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx device rtc8583 # Epson RTC-8583 device s35390a # Seiko Instruments S-35390A RTC device sy8106a # Silergy Corp. SY8106A buck regulator # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # pcfclock Parallel port clock driver. # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc envvar hint.ppc.0.at="isa" envvar hint.ppc.0.irq="7" device ppbus device lpt device plip device ppi device pps device lpbb device pcfclock # General Purpose I/O pins device dwgpio # Synopsys DesignWare APB GPIO Controller device gpio # gpio interfaces and bus support device gpiobacklight # sysctl control of gpio-based backlight device gpioiic # i2c via gpio bitbang device gpiokeys # kbd(4) glue for gpio-based key input device gpioled # led(4) gpio glue device gpiopower # event handler for gpio-based powerdown device gpiopps # Pulse per second input from gpio pin device gpioregulator # extres/regulator glue for gpio pin device gpiospi # SPI via gpio bitbang device gpioths # 1-wire temp/humidity sensor on gpio pin # Pulse width modulation device pwmbus # pwm interface and bus support device pwmc # userland control access to pwm outputs # # Etherswitch framework and drivers # # etherswitch The etherswitch(4) framework # miiproxy Proxy device for miibus(4) functionality # # Switch hardware support: # arswitch Atheros switches # ip17x IC+ 17x family switches # rtl8366r Realtek RTL8366 switches # ukswitch Multi-PHY switches # device etherswitch device miiproxy device arswitch device ip17x device rtl8366rb device ukswitch # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCL and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP options BOOTP_BLOCKSIZE=8192 # Override NFS block size # # Enable software watchdog routines, even if hardware watchdog is present. # By default, software watchdog timer is enabled only if no hardware watchdog # is present. # options SW_WATCHDOG # # Add the software deadlock resolver thread. # options DEADLKRES # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctl "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and changes a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Note that # modules should be recompiled as this option modifies KBI. # options DEBUG_LOCKS ##################################################################### # HID support device hid # Generic HID support options HID_DEBUG # enable debug msgs device hidbus # HID bus device hidmap # HID to evdev mapping device hidraw # Raw access driver options HIDRAW_MAKE_UHID_ALIAS # install /dev/uhid alias device hconf # Multitouch configuration TLC device hcons # Consumer controls device hgame # Generic game controllers device hkbd # HID keyboard device hms # HID mouse device hmt # HID multitouch (MS-compatible) device hpen # Generic pen driver device hsctrl # System controls device ps4dshock # Sony PS4 DualShock 4 gamepad driver device xb360gp # XBox 360 gamepad driver ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # XHCI controller device xhci # SL811 Controller #device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB temperature meter device ugold # USB LED device uled # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB mass storage driver (Requires scbus and da) device umass # USB mass storage driver for device-side mode device usfs # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # USB touchpad(s) device atp device wsp # eGalax USB touch screen device uep # Diamond Rio 500 MP3 player device urio # HID-over-USB driver device usbhid # # USB serial support device ucom # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra device u3g # USB support for Technologies ARK3116 based serial adapters device uark # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for some Windows CE based serial communication. device uipaq # USB support for Prolific PL-2303 serial adapters device uplcom # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters device uslcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # USB ethernet support device uether # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # ASIX Electronics AX88178A/AX88179 USB 2.0/3.0 gigabit ethernet driver. device axge # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # # RealTek RTL8152/RTL8153 USB Ethernet driver device ure # # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030. device mos # # HSxPA devices from Option N.V device uhso # Realtek RTL8188SU/RTL8191SU/RTL8192SU wireless driver device rsu # # Ralink Technology RT2501USB/RT2601USB wireless driver device rum # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver device run # # Atheros AR5523 wireless driver device uath # # Conexant/Intersil PrismGT wireless driver device upgt # # Ralink Technology RT2500USB wireless driver device ural # # RNDIS USB ethernet driver device urndis # Realtek RTL8187B/L wireless driver device urtw # # ZyDas ZD1211/ZD1211B wireless driver device zyd # # Sierra USB wireless driver device usie # # debugging options for the USB subsystem # options USB_DEBUG options U3G_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=jp.106 # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support # Only install the cryptodev device if you are running tests, or know # specifically why you need it. In most cases, it is not needed and # will make things slower. device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device ccr # Chelsio T6 device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/rescue/init # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking options IFMEDIA_DEBUG # enable debugging in net/if_media.c # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. If defined with a value # of zero, the verbose code is compiled-in but disabled by default, and can # be enabled with the debug.verbose_sysinit=1 tunable. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these is not considered an affront. options CAM_DEBUG_DELAY options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack options KSTACK_USAGE_PROF # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Resource Accounting options RACCT # Resource Limits options RCTL # Yet more undocumented options for linting. options MAXFILES=999 # Random number generator # Alternative algorithm. #options RANDOM_FENESTRASX # Allow the CSPRNG algorithm to be loaded as a module. #options RANDOM_LOADABLE # Select this to allow high-rate but potentially expensive # harvesting of Slab-Allocator entropy. In very high-rate # situations the value of doing this is dubious at best. options RANDOM_ENABLE_UMA # slab allocator # Select this to allow high-rate but potentially expensive # harvesting of of the m_next pointer in the mbuf. Note that # the m_next pointer is NULL except when receiving > 4K # jumbo frames or sustained bursts by way of LRO. Thus in # the common case it is stirring zero in to the entropy # pool. In cases where it is not NULL it is pointing to one # of a small (in the thousands to 10s of thousands) number # of 256 byte aligned mbufs. Hence it is, even in the best # case, a poor source of entropy. And in the absence of actual # runtime analysis of entropy collection may mislead the user in # to believe that substantially more entropy is being collected # than in fact is - leading to a different class of security # risk. In high packet rate situations ethernet entropy # collection is also very expensive, possibly leading to as # much as a 50% drop in packets received. # This option is present to maintain backwards compatibility # if desired, however it cannot be recommended for use in any # environment. options RANDOM_ENABLE_ETHER # ether_input # Module to enable execution of application via emulators like QEMU options IMAGACT_BINMISC # zlib I/O stream support # This enables support for compressed core dumps. options GZIO # zstd support # This enables support for Zstd compressed core dumps, GEOM_UZIP images, # and is required by zfs if statically linked. options ZSTDIO # BHND(4) drivers options BHND_LOGLEVEL # Logging threshold level # evdev interface device evdev # input event device support options EVDEV_SUPPORT # evdev support in legacy drivers options EVDEV_DEBUG # enable event debug msgs device uinput # install /dev/uinput cdev options UINPUT_DEBUG # enable uinput debug msgs # Encrypted kernel crash dumps. options EKCD # Serial Peripheral Interface (SPI) support. device spibus # Bus support. device at45d # DataFlash driver device cqspi # device mx25l # SPIFlash driver device n25q # device spigen # Generic access to SPI devices from userland. # Enable legacy /dev/spigenN name aliases for /dev/spigenX.Y devices. options SPIGEN_LEGACY_CDEVNAME # legacy device names for spigen # Compression supports. device zlib # gzip/zlib compression/decompression library device xz # xz_embedded LZMA de-compression library # Kernel support for stats(3). options STATS diff --git a/sys/conf/files b/sys/conf/files index 637aed6bfb9c..650887cf54e6 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1,5180 +1,5176 @@ # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # acpi_quirks.h optional acpi \ dependency "$S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ compile-with "${AWK} -f $S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ no-obj no-implicit-rule before-depend \ clean "acpi_quirks.h" bhnd_nvram_map.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -h" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map.h" bhnd_nvram_map_data.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -d" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map_data.h" fdt_static_dtb.h optional fdt fdt_dtb_static \ compile-with "sh -c 'MACHINE=${MACHINE} $S/tools/fdt/make_dtbh.sh ${FDT_DTS_FILE} ${.CURDIR}'" \ dependency "${FDT_DTS_FILE:T:R}.dtb" \ no-obj no-implicit-rule before-depend \ clean "fdt_static_dtb.h" feeder_eq_gen.h optional sound \ dependency "$S/tools/sound/feeder_eq_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_eq_mkfilter.awk -- ${FEEDER_EQ_PRESETS} > feeder_eq_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_eq_gen.h" feeder_rate_gen.h optional sound \ dependency "$S/tools/sound/feeder_rate_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_rate_mkfilter.awk -- ${FEEDER_RATE_PRESETS} > feeder_rate_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_rate_gen.h" font.h optional sc_dflt_font \ compile-with "uudecode < ${SRCTOP}/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < ${SRCTOP}/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < ${SRCTOP}/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \ no-obj no-implicit-rule before-depend \ clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8" snd_fxdiv_gen.h optional sound \ dependency "$S/tools/sound/snd_fxdiv_gen.awk" \ compile-with "${AWK} -f $S/tools/sound/snd_fxdiv_gen.awk -- > snd_fxdiv_gen.h" \ no-obj no-implicit-rule before-depend \ clean "snd_fxdiv_gen.h" miidevs.h optional miibus | mii \ dependency "$S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ compile-with "${AWK} -f $S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ no-obj no-implicit-rule before-depend \ clean "miidevs.h" pccarddevs.h standard \ dependency "$S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ compile-with "${AWK} -f $S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ no-obj no-implicit-rule before-depend \ clean "pccarddevs.h" kbdmuxmap.h optional kbdmux_dflt_keymap \ compile-with "${KEYMAP} -L ${KBDMUX_DFLT_KEYMAP} | ${KEYMAP_FIX} > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "kbdmuxmap.h" teken_state.h optional sc | vt \ dependency "$S/teken/gensequences $S/teken/sequences" \ compile-with "${AWK} -f $S/teken/gensequences $S/teken/sequences > teken_state.h" \ no-obj no-implicit-rule before-depend \ clean "teken_state.h" ukbdmap.h optional ukbd_dflt_keymap \ compile-with "${KEYMAP} -L ${UKBD_DFLT_KEYMAP} | ${KEYMAP_FIX} > ${.TARGET}" \ no-obj no-implicit-rule before-depend \ clean "ukbdmap.h" usbdevs.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -h" \ no-obj no-implicit-rule before-depend \ clean "usbdevs.h" usbdevs_data.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -d" \ no-obj no-implicit-rule before-depend \ clean "usbdevs_data.h" sdiodevs.h optional mmccam \ dependency "$S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs" \ compile-with "${AWK} -f $S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs -h" \ no-obj no-implicit-rule before-depend \ clean "sdiodevs.h" sdiodevs_data.h optional mmccam \ dependency "$S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs" \ compile-with "${AWK} -f $S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs -d" \ no-obj no-implicit-rule before-depend \ clean "sdiodevs_data.h" cam/cam.c optional scbus cam/cam_compat.c optional scbus cam/cam_iosched.c optional scbus cam/cam_periph.c optional scbus cam/cam_queue.c optional scbus cam/cam_sim.c optional scbus cam/cam_xpt.c optional scbus cam/ata/ata_all.c optional scbus cam/ata/ata_xpt.c optional scbus cam/ata/ata_pmp.c optional scbus cam/nvme/nvme_all.c optional scbus cam/nvme/nvme_da.c optional nda | da cam/nvme/nvme_xpt.c optional scbus cam/scsi/scsi_xpt.c optional scbus cam/scsi/scsi_all.c optional scbus cam/scsi/scsi_cd.c optional cd cam/scsi/scsi_ch.c optional ch cam/ata/ata_da.c optional ada | da cam/ctl/ctl.c optional ctl cam/ctl/ctl_backend.c optional ctl cam/ctl/ctl_backend_block.c optional ctl cam/ctl/ctl_backend_ramdisk.c optional ctl cam/ctl/ctl_cmd_table.c optional ctl cam/ctl/ctl_frontend.c optional ctl cam/ctl/ctl_frontend_cam_sim.c optional ctl cam/ctl/ctl_frontend_ioctl.c optional ctl cam/ctl/ctl_frontend_iscsi.c optional ctl cfiscsi cam/ctl/ctl_ha.c optional ctl cam/ctl/ctl_scsi_all.c optional ctl cam/ctl/ctl_tpc.c optional ctl cam/ctl/ctl_tpc_local.c optional ctl cam/ctl/ctl_error.c optional ctl cam/ctl/ctl_util.c optional ctl cam/ctl/scsi_ctl.c optional ctl cam/mmc/mmc_xpt.c optional scbus mmccam cam/mmc/mmc_sim.c optional scbus mmccam cam/mmc/mmc_sim_if.m optional scbus mmccam cam/mmc/mmc_da.c optional scbus mmccam da cam/scsi/scsi_da.c optional da cam/scsi/scsi_pass.c optional pass cam/scsi/scsi_pt.c optional pt cam/scsi/scsi_sa.c optional sa cam/scsi/scsi_enc.c optional ses cam/scsi/scsi_enc_ses.c optional ses cam/scsi/scsi_enc_safte.c optional ses cam/scsi/scsi_sg.c optional sg cam/scsi/scsi_targ_bh.c optional targbh cam/scsi/scsi_target.c optional targ cam/scsi/smp_all.c optional scbus # shared between zfs and dtrace cddl/compat/opensolaris/kern/opensolaris.c optional dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_proc.c optional zfs | dtrace compile-with "${CDDL_C}" contrib/openzfs/module/os/freebsd/spl/spl_misc.c optional zfs | dtrace compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_cmn_err.c optional zfs | dtrace compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_taskq.c optional zfs | dtrace compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_kmem.c optional zfs | dtrace compile-with "${ZFS_C}" #zfs solaris portability layer contrib/openzfs/module/os/freebsd/spl/acl_common.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/callb.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/list.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_acl.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_dtrace.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_kstat.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_policy.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_string.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_sunddi.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_sysevent.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_uio.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_vfs.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_vm.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_zone.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_procfs_list.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/spl/spl_zlib.c optional zfs compile-with "${ZFS_C}" # zfs specific #zfs avl contrib/openzfs/module/avl/avl.c optional zfs compile-with "${ZFS_C}" # zfs lua support contrib/openzfs/module/lua/lapi.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lauxlib.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lbaselib.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lcode.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lcompat.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lcorolib.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lctype.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/ldebug.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/ldo.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lfunc.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lgc.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/llex.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lmem.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lobject.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lopcodes.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lparser.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lstate.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lstring.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lstrlib.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/ltable.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/ltablib.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/ltm.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lvm.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/lua/lzio.c optional zfs compile-with "${ZFS_C}" # zfs nvpair support contrib/openzfs/module/nvpair/fnvpair.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/nvpair/nvpair.c optional zfs compile-with "${ZFS_RPC_C}" contrib/openzfs/module/nvpair/nvpair_alloc_fixed.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/nvpair/nvpair_alloc_spl.c optional zfs compile-with "${ZFS_C}" #zfs platform compatibility code contrib/openzfs/module/os/freebsd/zfs/abd_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/arc_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/crypto_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/dmu_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/hkdf.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/kmod_core.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/spa_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/sysctl_os.c optional zfs compile-with "${ZFS_C} -include $S/modules/zfs/zfs_config.h" contrib/openzfs/module/os/freebsd/zfs/vdev_file.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/vdev_label_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/vdev_geom.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_acl.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_ctldir.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_debug.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_dir.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_file_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_ioctl_compat.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_ioctl_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_racct.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_vfsops.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_vnops_os.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zfs_znode.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/os/freebsd/zfs/zvol_os.c optional zfs compile-with "${ZFS_C}" #zfs unicode support contrib/openzfs/module/unicode/uconv.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/unicode/u8_textprep.c optional zfs compile-with "${ZFS_C}" #zfs checksums / zcommon contrib/openzfs/module/zcommon/cityhash.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfeature_common.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_comutil.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_deleg.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_fletcher.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_fletcher_superscalar.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_fletcher_superscalar4.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_namecheck.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zfs_prop.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zpool_prop.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zcommon/zprop_common.c optional zfs compile-with "${ZFS_C}" # zfs edon-r hash support contrib/openzfs/module/icp/algs/edonr/edonr.c optional zfs compile-with "${ZFS_C}" #zfs core common code contrib/openzfs/module/zfs/abd.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/aggsum.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/arc.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/blkptr.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/bplist.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/bpobj.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/bptree.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/btree.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/bqueue.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dbuf.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dbuf_stats.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dataset_kstats.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/ddt.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/ddt_zap.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_diff.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_object.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_objset.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_recv.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_redact.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_send.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_traverse.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_tx.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dmu_zfetch.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dnode.c optional zfs compile-with "${ZFS_C}" \ warning "kernel contains CDDL licensed ZFS filesystem" contrib/openzfs/module/zfs/dnode_sync.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_bookmark.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_crypt.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_dataset.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_deadlist.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_deleg.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_destroy.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_dir.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_pool.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_prop.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_scan.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_synctask.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/dsl_userhold.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/edonr_zfs.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/fm.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/gzip.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/lzjb.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/lz4.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/metaslab.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/mmp.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/multilist.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/objlist.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/pathname.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/range_tree.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/refcount.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/rrwlock.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/sa.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/sha256.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/skein_zfs.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_boot.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_checkpoint.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_config.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_errlog.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_history.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_log_spacemap.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_misc.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/spa_stats.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/space_map.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/space_reftree.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/txg.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/uberblock.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/unique.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_cache.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_draid.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_draid_rand.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_indirect.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_indirect_births.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_indirect_mapping.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_initialize.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_label.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_mirror.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_missing.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_queue.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_raidz.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_raidz_math.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_raidz_math_scalar.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_rebuild.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_removal.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_root.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/vdev_trim.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zap.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zap_leaf.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zap_micro.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp_get.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp_global.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp_iter.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp_set.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zcp_synctask.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfeature.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_byteswap.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_fm.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_fuid.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_ioctl.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_log.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_onexit.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_quota.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_ratelimit.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_replay.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_rlock.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_sa.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zfs_vnops.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zstd/zfs_zstd.c optional zfs zstdio compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zil.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zio.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zio_checksum.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zio_compress.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zio_inject.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zle.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zrlock.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zthr.c optional zfs compile-with "${ZFS_C}" contrib/openzfs/module/zfs/zvol.c optional zfs compile-with "${ZFS_C}" # dtrace specific cddl/contrib/opensolaris/uts/common/dtrace/dtrace.c optional dtrace compile-with "${DTRACE_C}" \ warning "kernel contains CDDL licensed DTRACE" cddl/contrib/opensolaris/uts/common/dtrace/dtrace_xoroshiro128_plus.c optional dtrace compile-with "${DTRACE_C}" cddl/dev/dtmalloc/dtmalloc.c optional dtmalloc | dtraceall compile-with "${CDDL_C}" cddl/dev/profile/profile.c optional dtrace_profile | dtraceall compile-with "${CDDL_C}" cddl/dev/sdt/sdt.c optional dtrace_sdt | dtraceall compile-with "${CDDL_C}" cddl/dev/fbt/fbt.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}" cddl/dev/systrace/systrace.c optional dtrace_systrace | dtraceall compile-with "${CDDL_C}" cddl/dev/prototype.c optional dtrace_prototype | dtraceall compile-with "${CDDL_C}" fs/nfsclient/nfs_clkdtrace.c optional dtnfscl nfscl | dtraceall nfscl compile-with "${CDDL_C}" compat/freebsd32/freebsd32_abort2.c optional compat_freebsd32 compat/freebsd32/freebsd32_capability.c optional compat_freebsd32 compat/freebsd32/freebsd32_ioctl.c optional compat_freebsd32 compat/freebsd32/freebsd32_misc.c optional compat_freebsd32 compat/freebsd32/freebsd32_syscalls.c optional compat_freebsd32 compat/freebsd32/freebsd32_sysent.c optional compat_freebsd32 contrib/ck/src/ck_array.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_centralized.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_combining.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_dissemination.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_mcs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_tournament.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_epoch.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hp.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_ht.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_rhs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/dev/acpica/common/ahids.c optional acpi acpi_debug contrib/dev/acpica/common/ahuuids.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbcmds.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbconvert.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbdisply.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbexec.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbhistry.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbinput.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbmethod.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbnames.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbobject.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbstats.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbtest.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbutils.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbxface.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmbuffer.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmcstyle.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmdeferred.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmnames.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmopcode.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrc.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl2.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcs.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmutils.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmwalk.c optional acpi acpi_debug contrib/dev/acpica/components/dispatcher/dsargs.c optional acpi contrib/dev/acpica/components/dispatcher/dscontrol.c optional acpi contrib/dev/acpica/components/dispatcher/dsdebug.c optional acpi contrib/dev/acpica/components/dispatcher/dsfield.c optional acpi contrib/dev/acpica/components/dispatcher/dsinit.c optional acpi contrib/dev/acpica/components/dispatcher/dsmethod.c optional acpi contrib/dev/acpica/components/dispatcher/dsmthdat.c optional acpi contrib/dev/acpica/components/dispatcher/dsobject.c optional acpi contrib/dev/acpica/components/dispatcher/dsopcode.c optional acpi contrib/dev/acpica/components/dispatcher/dspkginit.c optional acpi contrib/dev/acpica/components/dispatcher/dsutils.c optional acpi contrib/dev/acpica/components/dispatcher/dswexec.c optional acpi contrib/dev/acpica/components/dispatcher/dswload.c optional acpi contrib/dev/acpica/components/dispatcher/dswload2.c optional acpi contrib/dev/acpica/components/dispatcher/dswscope.c optional acpi contrib/dev/acpica/components/dispatcher/dswstate.c optional acpi contrib/dev/acpica/components/events/evevent.c optional acpi contrib/dev/acpica/components/events/evglock.c optional acpi contrib/dev/acpica/components/events/evgpe.c optional acpi contrib/dev/acpica/components/events/evgpeblk.c optional acpi contrib/dev/acpica/components/events/evgpeinit.c optional acpi contrib/dev/acpica/components/events/evgpeutil.c optional acpi contrib/dev/acpica/components/events/evhandler.c optional acpi contrib/dev/acpica/components/events/evmisc.c optional acpi contrib/dev/acpica/components/events/evregion.c optional acpi contrib/dev/acpica/components/events/evrgnini.c optional acpi contrib/dev/acpica/components/events/evsci.c optional acpi contrib/dev/acpica/components/events/evxface.c optional acpi contrib/dev/acpica/components/events/evxfevnt.c optional acpi contrib/dev/acpica/components/events/evxfgpe.c optional acpi contrib/dev/acpica/components/events/evxfregn.c optional acpi contrib/dev/acpica/components/executer/exconcat.c optional acpi contrib/dev/acpica/components/executer/exconfig.c optional acpi contrib/dev/acpica/components/executer/exconvrt.c optional acpi contrib/dev/acpica/components/executer/excreate.c optional acpi contrib/dev/acpica/components/executer/exdebug.c optional acpi contrib/dev/acpica/components/executer/exdump.c optional acpi contrib/dev/acpica/components/executer/exfield.c optional acpi contrib/dev/acpica/components/executer/exfldio.c optional acpi contrib/dev/acpica/components/executer/exmisc.c optional acpi contrib/dev/acpica/components/executer/exmutex.c optional acpi contrib/dev/acpica/components/executer/exnames.c optional acpi contrib/dev/acpica/components/executer/exoparg1.c optional acpi contrib/dev/acpica/components/executer/exoparg2.c optional acpi contrib/dev/acpica/components/executer/exoparg3.c optional acpi contrib/dev/acpica/components/executer/exoparg6.c optional acpi contrib/dev/acpica/components/executer/exprep.c optional acpi contrib/dev/acpica/components/executer/exregion.c optional acpi contrib/dev/acpica/components/executer/exresnte.c optional acpi contrib/dev/acpica/components/executer/exresolv.c optional acpi contrib/dev/acpica/components/executer/exresop.c optional acpi contrib/dev/acpica/components/executer/exserial.c optional acpi contrib/dev/acpica/components/executer/exstore.c optional acpi contrib/dev/acpica/components/executer/exstoren.c optional acpi contrib/dev/acpica/components/executer/exstorob.c optional acpi contrib/dev/acpica/components/executer/exsystem.c optional acpi contrib/dev/acpica/components/executer/extrace.c optional acpi contrib/dev/acpica/components/executer/exutils.c optional acpi contrib/dev/acpica/components/hardware/hwacpi.c optional acpi contrib/dev/acpica/components/hardware/hwesleep.c optional acpi contrib/dev/acpica/components/hardware/hwgpe.c optional acpi contrib/dev/acpica/components/hardware/hwpci.c optional acpi contrib/dev/acpica/components/hardware/hwregs.c optional acpi contrib/dev/acpica/components/hardware/hwsleep.c optional acpi contrib/dev/acpica/components/hardware/hwtimer.c optional acpi contrib/dev/acpica/components/hardware/hwvalid.c optional acpi contrib/dev/acpica/components/hardware/hwxface.c optional acpi contrib/dev/acpica/components/hardware/hwxfsleep.c optional acpi contrib/dev/acpica/components/namespace/nsaccess.c optional acpi contrib/dev/acpica/components/namespace/nsalloc.c optional acpi contrib/dev/acpica/components/namespace/nsarguments.c optional acpi contrib/dev/acpica/components/namespace/nsconvert.c optional acpi contrib/dev/acpica/components/namespace/nsdump.c optional acpi contrib/dev/acpica/components/namespace/nseval.c optional acpi contrib/dev/acpica/components/namespace/nsinit.c optional acpi contrib/dev/acpica/components/namespace/nsload.c optional acpi contrib/dev/acpica/components/namespace/nsnames.c optional acpi contrib/dev/acpica/components/namespace/nsobject.c optional acpi contrib/dev/acpica/components/namespace/nsparse.c optional acpi contrib/dev/acpica/components/namespace/nspredef.c optional acpi contrib/dev/acpica/components/namespace/nsprepkg.c optional acpi contrib/dev/acpica/components/namespace/nsrepair.c optional acpi contrib/dev/acpica/components/namespace/nsrepair2.c optional acpi contrib/dev/acpica/components/namespace/nssearch.c optional acpi contrib/dev/acpica/components/namespace/nsutils.c optional acpi contrib/dev/acpica/components/namespace/nswalk.c optional acpi contrib/dev/acpica/components/namespace/nsxfeval.c optional acpi contrib/dev/acpica/components/namespace/nsxfname.c optional acpi contrib/dev/acpica/components/namespace/nsxfobj.c optional acpi contrib/dev/acpica/components/parser/psargs.c optional acpi contrib/dev/acpica/components/parser/psloop.c optional acpi contrib/dev/acpica/components/parser/psobject.c optional acpi contrib/dev/acpica/components/parser/psopcode.c optional acpi contrib/dev/acpica/components/parser/psopinfo.c optional acpi contrib/dev/acpica/components/parser/psparse.c optional acpi contrib/dev/acpica/components/parser/psscope.c optional acpi contrib/dev/acpica/components/parser/pstree.c optional acpi contrib/dev/acpica/components/parser/psutils.c optional acpi contrib/dev/acpica/components/parser/pswalk.c optional acpi contrib/dev/acpica/components/parser/psxface.c optional acpi contrib/dev/acpica/components/resources/rsaddr.c optional acpi contrib/dev/acpica/components/resources/rscalc.c optional acpi contrib/dev/acpica/components/resources/rscreate.c optional acpi contrib/dev/acpica/components/resources/rsdump.c optional acpi acpi_debug contrib/dev/acpica/components/resources/rsdumpinfo.c optional acpi contrib/dev/acpica/components/resources/rsinfo.c optional acpi contrib/dev/acpica/components/resources/rsio.c optional acpi contrib/dev/acpica/components/resources/rsirq.c optional acpi contrib/dev/acpica/components/resources/rslist.c optional acpi contrib/dev/acpica/components/resources/rsmemory.c optional acpi contrib/dev/acpica/components/resources/rsmisc.c optional acpi contrib/dev/acpica/components/resources/rsserial.c optional acpi contrib/dev/acpica/components/resources/rsutils.c optional acpi contrib/dev/acpica/components/resources/rsxface.c optional acpi contrib/dev/acpica/components/tables/tbdata.c optional acpi contrib/dev/acpica/components/tables/tbfadt.c optional acpi contrib/dev/acpica/components/tables/tbfind.c optional acpi contrib/dev/acpica/components/tables/tbinstal.c optional acpi contrib/dev/acpica/components/tables/tbprint.c optional acpi contrib/dev/acpica/components/tables/tbutils.c optional acpi contrib/dev/acpica/components/tables/tbxface.c optional acpi contrib/dev/acpica/components/tables/tbxfload.c optional acpi contrib/dev/acpica/components/tables/tbxfroot.c optional acpi contrib/dev/acpica/components/utilities/utaddress.c optional acpi contrib/dev/acpica/components/utilities/utalloc.c optional acpi contrib/dev/acpica/components/utilities/utascii.c optional acpi contrib/dev/acpica/components/utilities/utbuffer.c optional acpi contrib/dev/acpica/components/utilities/utcache.c optional acpi contrib/dev/acpica/components/utilities/utcopy.c optional acpi contrib/dev/acpica/components/utilities/utdebug.c optional acpi contrib/dev/acpica/components/utilities/utdecode.c optional acpi contrib/dev/acpica/components/utilities/utdelete.c optional acpi contrib/dev/acpica/components/utilities/uterror.c optional acpi contrib/dev/acpica/components/utilities/uteval.c optional acpi contrib/dev/acpica/components/utilities/utexcep.c optional acpi contrib/dev/acpica/components/utilities/utglobal.c optional acpi contrib/dev/acpica/components/utilities/uthex.c optional acpi contrib/dev/acpica/components/utilities/utids.c optional acpi contrib/dev/acpica/components/utilities/utinit.c optional acpi contrib/dev/acpica/components/utilities/utlock.c optional acpi contrib/dev/acpica/components/utilities/utmath.c optional acpi contrib/dev/acpica/components/utilities/utmisc.c optional acpi contrib/dev/acpica/components/utilities/utmutex.c optional acpi contrib/dev/acpica/components/utilities/utnonansi.c optional acpi contrib/dev/acpica/components/utilities/utobject.c optional acpi contrib/dev/acpica/components/utilities/utosi.c optional acpi contrib/dev/acpica/components/utilities/utownerid.c optional acpi contrib/dev/acpica/components/utilities/utpredef.c optional acpi contrib/dev/acpica/components/utilities/utresdecode.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utresrc.c optional acpi contrib/dev/acpica/components/utilities/utstate.c optional acpi contrib/dev/acpica/components/utilities/utstring.c optional acpi contrib/dev/acpica/components/utilities/utstrsuppt.c optional acpi contrib/dev/acpica/components/utilities/utstrtoul64.c optional acpi contrib/dev/acpica/components/utilities/utuuid.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utxface.c optional acpi contrib/dev/acpica/components/utilities/utxferror.c optional acpi contrib/dev/acpica/components/utilities/utxfinit.c optional acpi contrib/dev/acpica/os_specific/service_layers/osgendbg.c optional acpi acpi_debug contrib/ipfilter/netinet/fil.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_auth.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_fil_freebsd.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_frag.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_log.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_proxy.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_state.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_lookup.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -Wno-error -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_pool.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_htable.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter ${NO_WTAUTOLOGICAL_POINTER_COMPARE}" contrib/ipfilter/netinet/ip_sync.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/mlfk_ipl.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat6.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_rules.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_scan.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_dstlist.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/radix_ipf.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/libfdt/fdt.c optional fdt contrib/libfdt/fdt_ro.c optional fdt contrib/libfdt/fdt_rw.c optional fdt contrib/libfdt/fdt_strerror.c optional fdt contrib/libfdt/fdt_sw.c optional fdt contrib/libfdt/fdt_wip.c optional fdt contrib/libnv/cnvlist.c standard contrib/libnv/dnvlist.c standard contrib/libnv/nvlist.c standard contrib/libnv/bsd_nvpair.c standard contrib/ngatm/netnatm/api/cc_conn.c optional ngatm_ccatm \ compile-with "${NORMAL_C_NOWERROR} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_data.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_dump.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_port.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_sig.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_user.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/unisap.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/straddr.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/unimsg_common.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/traffic.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_ie.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_msg.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_call.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_coord.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_party.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_print.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_reset.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_unimsgcpy.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_verify.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" # xz dev/xz/xz_mod.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_crc32.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_bcj.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_lzma2.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_stream.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" # Zstd contrib/zstd/lib/freebsd/zstd_kmalloc.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/zstd_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/fse_decompress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/entropy_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/error_private.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/xxhash.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress_literals.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress_sequences.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress_superblock.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/fse_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/hist.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/huf_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_double_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_lazy.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_ldm.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_opt.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_ddict.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_decompress.c optional zstdio compile-with ${ZSTD_C} # See comment in sys/conf/kern.pre.mk contrib/zstd/lib/decompress/zstd_decompress_block.c optional zstdio \ compile-with "${ZSTD_C} ${ZSTD_DECOMPRESS_BLOCK_FLAGS}" contrib/zstd/lib/decompress/huf_decompress.c optional zstdio compile-with ${ZSTD_C} # Blake 2 contrib/libb2/blake2b-ref.c optional crypto | ipsec | ipsec_support | !random_loadable random_fenestrasx \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" contrib/libb2/blake2s-ref.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" crypto/blake2/blake2-sw.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual" crypto/camellia/camellia.c optional crypto | ipsec | ipsec_support crypto/camellia/camellia-api.c optional crypto | ipsec | ipsec_support crypto/chacha20/chacha.c standard crypto/chacha20/chacha-sw.c optional crypto | ipsec | ipsec_support crypto/des/des_ecb.c optional netsmb crypto/des/des_setkey.c optional netsmb crypto/openssl/ossl.c optional ossl crypto/openssl/ossl_aes.c optional ossl crypto/openssl/ossl_chacha20.c optional ossl crypto/openssl/ossl_poly1305.c optional ossl crypto/openssl/ossl_sha1.c optional ossl crypto/openssl/ossl_sha256.c optional ossl crypto/openssl/ossl_sha512.c optional ossl crypto/rc4/rc4.c optional netgraph_mppc_encryption crypto/rijndael/rijndael-alg-fst.c optional crypto | ekcd | geom_bde | \ ipsec | ipsec_support | !random_loadable | wlan_ccmp crypto/rijndael/rijndael-api-fst.c optional ekcd | geom_bde | !random_loadable crypto/rijndael/rijndael-api.c optional crypto | ipsec | ipsec_support | \ wlan_ccmp crypto/sha1.c optional carp | crypto | ether | ipsec | \ ipsec_support | netgraph_mppc_encryption | sctp crypto/sha2/sha256c.c optional crypto | ekcd | geom_bde | ipsec | \ ipsec_support | !random_loadable | sctp | zfs crypto/sha2/sha512c.c optional crypto | geom_bde | ipsec | \ ipsec_support | zfs crypto/skein/skein.c optional crypto | zfs crypto/skein/skein_block.c optional crypto | zfs crypto/siphash/siphash.c optional inet | inet6 crypto/siphash/siphash_test.c optional inet | inet6 ddb/db_access.c optional ddb ddb/db_break.c optional ddb ddb/db_capture.c optional ddb ddb/db_command.c optional ddb ddb/db_examine.c optional ddb ddb/db_expr.c optional ddb ddb/db_input.c optional ddb ddb/db_lex.c optional ddb ddb/db_main.c optional ddb ddb/db_output.c optional ddb ddb/db_print.c optional ddb ddb/db_ps.c optional ddb ddb/db_run.c optional ddb ddb/db_script.c optional ddb ddb/db_sym.c optional ddb ddb/db_thread.c optional ddb ddb/db_textdump.c optional ddb ddb/db_variables.c optional ddb ddb/db_watch.c optional ddb ddb/db_write_cmd.c optional ddb dev/aac/aac.c optional aac dev/aac/aac_cam.c optional aacp aac dev/aac/aac_debug.c optional aac dev/aac/aac_disk.c optional aac dev/aac/aac_pci.c optional aac pci dev/aacraid/aacraid.c optional aacraid dev/aacraid/aacraid_cam.c optional aacraid scbus dev/aacraid/aacraid_debug.c optional aacraid dev/aacraid/aacraid_pci.c optional aacraid pci dev/acpi_support/acpi_wmi.c optional acpi_wmi acpi dev/acpi_support/acpi_asus.c optional acpi_asus acpi dev/acpi_support/acpi_asus_wmi.c optional acpi_asus_wmi acpi dev/acpi_support/acpi_fujitsu.c optional acpi_fujitsu acpi dev/acpi_support/acpi_hp.c optional acpi_hp acpi dev/acpi_support/acpi_ibm.c optional acpi_ibm acpi dev/acpi_support/acpi_panasonic.c optional acpi_panasonic acpi dev/acpi_support/acpi_sony.c optional acpi_sony acpi dev/acpi_support/acpi_toshiba.c optional acpi_toshiba acpi dev/acpi_support/atk0110.c optional aibs acpi dev/acpica/Osd/OsdDebug.c optional acpi dev/acpica/Osd/OsdHardware.c optional acpi dev/acpica/Osd/OsdInterrupt.c optional acpi dev/acpica/Osd/OsdMemory.c optional acpi dev/acpica/Osd/OsdSchedule.c optional acpi dev/acpica/Osd/OsdStream.c optional acpi dev/acpica/Osd/OsdSynch.c optional acpi dev/acpica/Osd/OsdTable.c optional acpi dev/acpica/acpi.c optional acpi dev/acpica/acpi_acad.c optional acpi dev/acpica/acpi_apei.c optional acpi dev/acpica/acpi_battery.c optional acpi dev/acpica/acpi_button.c optional acpi dev/acpica/acpi_cmbat.c optional acpi dev/acpica/acpi_cpu.c optional acpi dev/acpica/acpi_ec.c optional acpi dev/acpica/acpi_isab.c optional acpi isa dev/acpica/acpi_lid.c optional acpi dev/acpica/acpi_package.c optional acpi dev/acpica/acpi_perf.c optional acpi dev/acpica/acpi_powerres.c optional acpi dev/acpica/acpi_quirk.c optional acpi dev/acpica/acpi_resource.c optional acpi dev/acpica/acpi_container.c optional acpi dev/acpica/acpi_smbat.c optional acpi dev/acpica/acpi_thermal.c optional acpi dev/acpica/acpi_throttle.c optional acpi dev/acpica/acpi_video.c optional acpi_video acpi dev/acpica/acpi_dock.c optional acpi_dock acpi dev/adlink/adlink.c optional adlink dev/ae/if_ae.c optional ae pci dev/age/if_age.c optional age pci dev/agp/agp.c optional agp pci dev/agp/agp_if.m optional agp pci dev/ahci/ahci.c optional ahci dev/ahci/ahciem.c optional ahci dev/ahci/ahci_pci.c optional ahci pci dev/aic7xxx/ahc_isa.c optional ahc isa dev/aic7xxx/ahc_pci.c optional ahc pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/ahd_pci.c optional ahd pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/aic7770.c optional ahc dev/aic7xxx/aic79xx.c optional ahd pci dev/aic7xxx/aic79xx_osm.c optional ahd pci dev/aic7xxx/aic79xx_pci.c optional ahd pci dev/aic7xxx/aic79xx_reg_print.c optional ahd pci ahd_reg_pretty_print dev/aic7xxx/aic7xxx.c optional ahc dev/aic7xxx/aic7xxx_93cx6.c optional ahc dev/aic7xxx/aic7xxx_osm.c optional ahc dev/aic7xxx/aic7xxx_pci.c optional ahc pci dev/aic7xxx/aic7xxx_reg_print.c optional ahc ahc_reg_pretty_print dev/al_eth/al_eth.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" dev/al_eth/al_init_eth_lm.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" dev/al_eth/al_init_eth_kr.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_iofic.c optional al_iofic \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_25g.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_hssp.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_config.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_debug.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_iofic.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_main.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/al_serdes.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_kr.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_main.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${.IMPSRC}" dev/alc/if_alc.c optional alc pci dev/ale/if_ale.c optional ale pci dev/alpm/alpm.c optional alpm pci dev/altera/avgen/altera_avgen.c optional altera_avgen dev/altera/avgen/altera_avgen_fdt.c optional altera_avgen fdt dev/altera/avgen/altera_avgen_nexus.c optional altera_avgen dev/altera/msgdma/msgdma.c optional altera_msgdma xdma dev/altera/sdcard/altera_sdcard.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_disk.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_io.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_fdt.c optional altera_sdcard fdt dev/altera/sdcard/altera_sdcard_nexus.c optional altera_sdcard dev/altera/softdma/softdma.c optional altera_softdma xdma fdt dev/altera/pio/pio.c optional altera_pio dev/altera/pio/pio_if.m optional altera_pio dev/amdpm/amdpm.c optional amdpm pci | nfpm pci dev/amdsmb/amdsmb.c optional amdsmb pci -dev/amr/amr.c optional amr -dev/amr/amr_cam.c optional amrp amr -dev/amr/amr_disk.c optional amr -dev/amr/amr_pci.c optional amr pci # dev/ata/ata_if.m optional ata | atacore dev/ata/ata-all.c optional ata | atacore dev/ata/ata-dma.c optional ata | atacore dev/ata/ata-lowlevel.c optional ata | atacore dev/ata/ata-sata.c optional ata | atacore dev/ata/ata-isa.c optional ata isa | ataisa dev/ata/ata-pci.c optional ata pci | atapci dev/ata/chipsets/ata-acard.c optional ata pci | ataacard dev/ata/chipsets/ata-acerlabs.c optional ata pci | ataacerlabs dev/ata/chipsets/ata-amd.c optional ata pci | ataamd dev/ata/chipsets/ata-ati.c optional ata pci | ataati dev/ata/chipsets/ata-cenatek.c optional ata pci | atacenatek dev/ata/chipsets/ata-cypress.c optional ata pci | atacypress dev/ata/chipsets/ata-cyrix.c optional ata pci | atacyrix dev/ata/chipsets/ata-highpoint.c optional ata pci | atahighpoint dev/ata/chipsets/ata-intel.c optional ata pci | ataintel dev/ata/chipsets/ata-ite.c optional ata pci | ataite dev/ata/chipsets/ata-jmicron.c optional ata pci | atajmicron dev/ata/chipsets/ata-marvell.c optional ata pci | atamarvell dev/ata/chipsets/ata-micron.c optional ata pci | atamicron dev/ata/chipsets/ata-national.c optional ata pci | atanational dev/ata/chipsets/ata-netcell.c optional ata pci | atanetcell dev/ata/chipsets/ata-nvidia.c optional ata pci | atanvidia dev/ata/chipsets/ata-promise.c optional ata pci | atapromise dev/ata/chipsets/ata-serverworks.c optional ata pci | ataserverworks dev/ata/chipsets/ata-siliconimage.c optional ata pci | atasiliconimage | ataati dev/ata/chipsets/ata-sis.c optional ata pci | atasis dev/ata/chipsets/ata-via.c optional ata pci | atavia # dev/ath/if_ath_pci.c optional ath_pci pci \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath_ahb.c optional ath_ahb \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_alq.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_beacon.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex_mci.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_debug.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_descdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_keycache.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_ioctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_led.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_lna_div.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_ht.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_sysctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_spectral.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ah_osdep.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/ath_hal/ah.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v1.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v3.c optional ath_hal | ath_ar5211 | ath_ar5212 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v14.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v4k.c \ optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_9287.c \ optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_regdomain.c optional ath \ compile-with "${NORMAL_C} ${NO_WSHIFT_COUNT_NEGATIVE} ${NO_WSHIFT_COUNT_OVERFLOW} -I$S/dev/ath" # ar5210 dev/ath/ath_hal/ar5210/ar5210_attach.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_beacon.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_interrupts.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_keycache.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_misc.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_phy.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_power.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_recv.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_reset.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_xmit.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5211 dev/ath/ath_hal/ar5211/ar5211_attach.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_beacon.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_interrupts.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_keycache.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_misc.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_phy.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_power.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_recv.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_reset.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_xmit.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5212 dev/ath/ath_hal/ar5212/ar5212_ani.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_attach.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_beacon.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_eeprom.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_gpio.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_interrupts.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_keycache.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_misc.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_phy.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_power.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_recv.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_reset.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_rfgain.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_xmit.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5416 (depends on ar5212) dev/ath/ath_hal/ar5416/ar5416_ani.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_attach.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_beacon.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_btcoex.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_iq.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcgain.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcdc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_eeprom.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_gpio.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_interrupts.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_keycache.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_misc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_phy.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_power.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_radar.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_recv.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_reset.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_spectral.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_xmit.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9130 (depends upon ar5416) - also requires AH_SUPPORT_AR9130 # # Since this is an embedded MAC SoC, there's no need to compile it into the # default HAL. dev/ath/ath_hal/ar9001/ar9130_attach.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_phy.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_eeprom.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9160 (depends on ar5416) dev/ath/ath_hal/ar9001/ar9160_attach.c optional ath_hal | ath_ar9160 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9280 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9280_attach.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280_olc.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9285 (depends on ar5416 and ar9280) dev/ath/ath_hal/ar9002/ar9285_attach.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_btcoex.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_reset.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_cal.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_phy.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_diversity.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9287 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9287_attach.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_reset.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_cal.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_olc.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9300 contrib/dev/ath/ath_hal/ar9300/ar9300_ani.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_attach.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WCONSTANT_CONVERSION}" contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_gpio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_interrupts.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_keycache.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_mci.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_misc.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_paprd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_phy.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_power.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radar.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WSOMETIMES_UNINITIALIZED} -Wno-unused-function" contrib/dev/ath/ath_hal/ar9300/ar9300_stub.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_stub_funcs.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_spectral.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_timer.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" # rf backends dev/ath/ath_hal/ar5212/ar2316.c optional ath_rf2316 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2317.c optional ath_rf2317 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2413.c optional ath_hal | ath_rf2413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2425.c optional ath_hal | ath_rf2425 | ath_rf2417 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5111.c optional ath_hal | ath_rf5111 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5112.c optional ath_hal | ath_rf5112 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5413.c optional ath_hal | ath_rf5413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar2133.c optional ath_hal | ath_ar5416 | \ ath_ar9130 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280.c optional ath_hal | ath_ar9280 | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ath rate control algorithms dev/ath/ath_rate/amrr/amrr.c optional ath_rate_amrr \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/onoe/onoe.c optional ath_rate_onoe \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/sample/sample.c optional ath_rate_sample \ compile-with "${NORMAL_C} -I$S/dev/ath" # ath DFS modules dev/ath/ath_dfs/null/dfs_null.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/backlight/backlight_if.m optional backlight | compat_linuxkpi dev/backlight/backlight.c optional backlight | compat_linuxkpi dev/bce/if_bce.c optional bce dev/bfe/if_bfe.c optional bfe dev/bge/if_bge.c optional bge dev/bhnd/bhnd.c optional bhnd dev/bhnd/bhnd_erom.c optional bhnd dev/bhnd/bhnd_erom_if.m optional bhnd dev/bhnd/bhnd_subr.c optional bhnd dev/bhnd/bhnd_bus_if.m optional bhnd dev/bhnd/bhndb/bhnd_bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_bus_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_hwdata.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_pci.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_hwdata.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_sprom.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_subr.c optional bhndb bhnd dev/bhnd/bcma/bcma.c optional bcma bhnd dev/bhnd/bcma/bcma_bhndb.c optional bcma bhnd bhndb dev/bhnd/bcma/bcma_erom.c optional bcma bhnd dev/bhnd/bcma/bcma_subr.c optional bcma bhnd dev/bhnd/cores/chipc/bhnd_chipc_if.m optional bhnd dev/bhnd/cores/chipc/bhnd_sprom_chipc.c optional bhnd dev/bhnd/cores/chipc/bhnd_pmu_chipc.c optional bhnd dev/bhnd/cores/chipc/chipc.c optional bhnd dev/bhnd/cores/chipc/chipc_cfi.c optional bhnd cfi dev/bhnd/cores/chipc/chipc_gpio.c optional bhnd gpio dev/bhnd/cores/chipc/chipc_slicer.c optional bhnd cfi | bhnd spibus dev/bhnd/cores/chipc/chipc_spi.c optional bhnd spibus dev/bhnd/cores/chipc/chipc_subr.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_hostb_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_subr.c optional bhnd dev/bhnd/cores/pci/bhnd_pci.c optional bhnd pci dev/bhnd/cores/pci/bhnd_pci_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pci/bhnd_pcib.c optional bhnd_pcib bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2.c optional bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2b.c optional bhnd_pcie2b bhnd pci dev/bhnd/cores/pmu/bhnd_pmu.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_core.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_if.m optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcm.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcmraw.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_btxt.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_tlv.c optional bhnd dev/bhnd/nvram/bhnd_nvram_if.m optional bhnd dev/bhnd/nvram/bhnd_nvram_io.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iobuf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_ioptr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iores.c optional bhnd dev/bhnd/nvram/bhnd_nvram_plist.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_fmts.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_prf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_subr.c optional bhnd dev/bhnd/nvram/bhnd_sprom.c optional bhnd dev/bhnd/siba/siba.c optional siba bhnd dev/bhnd/siba/siba_bhndb.c optional siba bhnd bhndb dev/bhnd/siba/siba_erom.c optional siba bhnd dev/bhnd/siba/siba_subr.c optional siba bhnd # dev/bnxt/bnxt_hwrm.c optional bnxt iflib pci dev/bnxt/bnxt_sysctl.c optional bnxt iflib pci dev/bnxt/bnxt_txrx.c optional bnxt iflib pci dev/bnxt/if_bnxt.c optional bnxt iflib pci dev/bwi/bwimac.c optional bwi dev/bwi/bwiphy.c optional bwi dev/bwi/bwirf.c optional bwi dev/bwi/if_bwi.c optional bwi dev/bwi/if_bwi_pci.c optional bwi pci dev/bwn/if_bwn.c optional bwn bhnd dev/bwn/if_bwn_pci.c optional bwn pci bhnd bhndb bhndb_pci dev/bwn/if_bwn_phy_common.c optional bwn bhnd dev/bwn/if_bwn_phy_g.c optional bwn bhnd dev/bwn/if_bwn_phy_lp.c optional bwn bhnd dev/bwn/if_bwn_phy_n.c optional bwn bhnd dev/bwn/if_bwn_util.c optional bwn bhnd dev/cadence/if_cgem.c optional cgem fdt dev/cardbus/card_if.m standard dev/cardbus/cardbus.c optional cardbus dev/cardbus/cardbus_cis.c optional cardbus dev/cardbus/cardbus_device.c optional cardbus dev/cardbus/power_if.m standard dev/cas/if_cas.c optional cas dev/cfi/cfi_bus_fdt.c optional cfi fdt dev/cfi/cfi_bus_nexus.c optional cfi dev/cfi/cfi_core.c optional cfi dev/cfi/cfi_dev.c optional cfi dev/cfi/cfi_disk.c optional cfid dev/chromebook_platform/chromebook_platform.c optional chromebook_platform dev/ciss/ciss.c optional ciss dev/cpufreq/ichss.c optional cpufreq pci dev/cxgb/cxgb_main.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_sge.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mc5.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc7323.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc8211.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_ael1002.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_aq100x.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mv88e1xxx.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_xgmac.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_t3_hw.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_tn1010.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/sys/uipc_mvec.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_t3fw.c optional cxgb cxgb_t3fw \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgbe/t4_clip.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_filter.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_if.m optional cxgbe pci dev/cxgbe/t4_iov.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_mp_ring.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_main.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_netmap.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sched.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sge.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_smt.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_l2t.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_tracer.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_vf.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4_hw.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4vf_hw.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/crypto/t4_kern_tls.c optional cxgbe pci kern_tls \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/crypto/t4_keyctx.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_common.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_flash_utils.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_lib.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_wtp.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz_api.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" t4fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t4fw_cfg.fw:t4fw_cfg t4fw_cfg_uwire.fw:t4fw_cfg_uwire t4fw.fw:t4fw -mt4fw_cfg -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "t4fw_cfg.c" t4fw_cfg.fwo optional cxgbe \ dependency "t4fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg.fwo" t4fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg.fw" t4fw_cfg_uwire.fwo optional cxgbe \ dependency "t4fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg_uwire.fwo" t4fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg_uwire.fw" t4fw.fwo optional cxgbe \ dependency "t4fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw.fwo" t4fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw-1.26.2.0.bin" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw.fw" t5fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t5fw_cfg.fw:t5fw_cfg t5fw_cfg_uwire.fw:t5fw_cfg_uwire t5fw.fw:t5fw -mt5fw_cfg -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "t5fw_cfg.c" t5fw_cfg.fwo optional cxgbe \ dependency "t5fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg.fwo" t5fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg.fw" t5fw_cfg_uwire.fwo optional cxgbe \ dependency "t5fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg_uwire.fwo" t5fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg_uwire.fw" t5fw.fwo optional cxgbe \ dependency "t5fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw.fwo" t5fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw-1.26.2.0.bin" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw.fw" t6fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t6fw_cfg.fw:t6fw_cfg t6fw_cfg_uwire.fw:t6fw_cfg_uwire t6fw.fw:t6fw -mt6fw_cfg -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "t6fw_cfg.c" t6fw_cfg.fwo optional cxgbe \ dependency "t6fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg.fwo" t6fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg.fw" t6fw_cfg_uwire.fwo optional cxgbe \ dependency "t6fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg_uwire.fwo" t6fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg_uwire.fw" t6fw.fwo optional cxgbe \ dependency "t6fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw.fwo" t6fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw-1.26.2.0.bin" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw.fw" dev/cxgbe/crypto/t4_crypto.c optional ccr \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cyapa/cyapa.c optional cyapa iicbus dev/dc/if_dc.c optional dc pci dev/dc/dcphy.c optional dc pci dev/dc/pnphy.c optional dc pci dev/dcons/dcons.c optional dcons dev/dcons/dcons_crom.c optional dcons_crom dev/dcons/dcons_os.c optional dcons dev/dme/if_dme.c optional dme dev/drm2/drm_agpsupport.c optional drm2 dev/drm2/drm_auth.c optional drm2 dev/drm2/drm_bufs.c optional drm2 dev/drm2/drm_buffer.c optional drm2 dev/drm2/drm_context.c optional drm2 dev/drm2/drm_crtc.c optional drm2 dev/drm2/drm_crtc_helper.c optional drm2 dev/drm2/drm_dma.c optional drm2 dev/drm2/drm_dp_helper.c optional drm2 dev/drm2/drm_dp_iic_helper.c optional drm2 dev/drm2/drm_drv.c optional drm2 dev/drm2/drm_edid.c optional drm2 dev/drm2/drm_fb_helper.c optional drm2 dev/drm2/drm_fops.c optional drm2 dev/drm2/drm_gem.c optional drm2 dev/drm2/drm_gem_names.c optional drm2 dev/drm2/drm_global.c optional drm2 dev/drm2/drm_hashtab.c optional drm2 dev/drm2/drm_ioctl.c optional drm2 dev/drm2/drm_irq.c optional drm2 dev/drm2/drm_linux_list_sort.c optional drm2 dev/drm2/drm_lock.c optional drm2 dev/drm2/drm_memory.c optional drm2 dev/drm2/drm_mm.c optional drm2 dev/drm2/drm_modes.c optional drm2 dev/drm2/drm_pci.c optional drm2 dev/drm2/drm_platform.c optional drm2 dev/drm2/drm_scatter.c optional drm2 dev/drm2/drm_stub.c optional drm2 dev/drm2/drm_sysctl.c optional drm2 dev/drm2/drm_vm.c optional drm2 dev/drm2/drm_os_freebsd.c optional drm2 dev/drm2/ttm/ttm_agp_backend.c optional drm2 dev/drm2/ttm/ttm_lock.c optional drm2 dev/drm2/ttm/ttm_object.c optional drm2 dev/drm2/ttm/ttm_tt.c optional drm2 dev/drm2/ttm/ttm_bo_util.c optional drm2 dev/drm2/ttm/ttm_bo.c optional drm2 dev/drm2/ttm/ttm_bo_manager.c optional drm2 dev/drm2/ttm/ttm_execbuf_util.c optional drm2 dev/drm2/ttm/ttm_memory.c optional drm2 dev/drm2/ttm/ttm_page_alloc.c optional drm2 dev/drm2/ttm/ttm_bo_vm.c optional drm2 dev/efidev/efidev.c optional efirt dev/efidev/efirt.c optional efirt dev/efidev/efirtc.c optional efirt dev/e1000/if_em.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/em_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/igb_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_80003es2lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82540.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82541.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82542.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82543.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82571.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82575.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_ich8lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_i210.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_api.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_base.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mac.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_manage.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_nvm.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_phy.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_vf.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mbx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_osdep.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/et/if_et.c optional et dev/ena/ena.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_datapath.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_netmap.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_rss.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_sysctl.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" contrib/ena-com/ena_com.c optional ena contrib/ena-com/ena_eth_com.c optional ena dev/esp/esp_pci.c optional esp pci dev/esp/ncr53c9x.c optional esp dev/etherswitch/arswitch/arswitch.c optional arswitch dev/etherswitch/arswitch/arswitch_reg.c optional arswitch dev/etherswitch/arswitch/arswitch_phy.c optional arswitch dev/etherswitch/arswitch/arswitch_8216.c optional arswitch dev/etherswitch/arswitch/arswitch_8226.c optional arswitch dev/etherswitch/arswitch/arswitch_8316.c optional arswitch dev/etherswitch/arswitch/arswitch_8327.c optional arswitch dev/etherswitch/arswitch/arswitch_7240.c optional arswitch dev/etherswitch/arswitch/arswitch_9340.c optional arswitch dev/etherswitch/arswitch/arswitch_vlans.c optional arswitch dev/etherswitch/etherswitch.c optional etherswitch dev/etherswitch/etherswitch_if.m optional etherswitch dev/etherswitch/ip17x/ip17x.c optional ip17x dev/etherswitch/ip17x/ip175c.c optional ip17x dev/etherswitch/ip17x/ip175d.c optional ip17x dev/etherswitch/ip17x/ip17x_phy.c optional ip17x dev/etherswitch/ip17x/ip17x_vlans.c optional ip17x dev/etherswitch/miiproxy.c optional miiproxy dev/etherswitch/rtl8366/rtl8366rb.c optional rtl8366rb dev/etherswitch/e6000sw/e6000sw.c optional e6000sw dev/etherswitch/e6000sw/e6060sw.c optional e6060sw dev/etherswitch/infineon/adm6996fc.c optional adm6996fc dev/etherswitch/micrel/ksz8995ma.c optional ksz8995ma dev/etherswitch/ukswitch/ukswitch.c optional ukswitch dev/evdev/cdev.c optional evdev dev/evdev/evdev.c optional evdev dev/evdev/evdev_mt.c optional evdev dev/evdev/evdev_utils.c optional evdev dev/evdev/uinput.c optional evdev uinput dev/exca/exca.c optional cbb dev/extres/clk/clk.c optional ext_resources clk fdt dev/extres/clk/clkdev_if.m optional ext_resources clk fdt dev/extres/clk/clknode_if.m optional ext_resources clk fdt dev/extres/clk/clk_bus.c optional ext_resources clk fdt dev/extres/clk/clk_div.c optional ext_resources clk fdt dev/extres/clk/clk_fixed.c optional ext_resources clk fdt dev/extres/clk/clk_gate.c optional ext_resources clk fdt dev/extres/clk/clk_link.c optional ext_resources clk fdt dev/extres/clk/clk_mux.c optional ext_resources clk fdt dev/extres/phy/phy.c optional ext_resources phy fdt dev/extres/phy/phydev_if.m optional ext_resources phy fdt dev/extres/phy/phynode_if.m optional ext_resources phy fdt dev/extres/phy/phy_usb.c optional ext_resources phy fdt dev/extres/phy/phynode_usb_if.m optional ext_resources phy fdt dev/extres/hwreset/hwreset.c optional ext_resources hwreset fdt dev/extres/hwreset/hwreset_if.m optional ext_resources hwreset fdt dev/extres/nvmem/nvmem.c optional ext_resources nvmem fdt dev/extres/nvmem/nvmem_if.m optional ext_resources nvmem fdt dev/extres/regulator/regdev_if.m optional ext_resources regulator fdt dev/extres/regulator/regnode_if.m optional ext_resources regulator fdt dev/extres/regulator/regulator.c optional ext_resources regulator fdt dev/extres/regulator/regulator_bus.c optional ext_resources regulator fdt dev/extres/regulator/regulator_fixed.c optional ext_resources regulator fdt dev/extres/syscon/syscon.c optional ext_resources syscon dev/extres/syscon/syscon_generic.c optional ext_resources syscon fdt dev/extres/syscon/syscon_if.m optional ext_resources syscon dev/extres/syscon/syscon_power.c optional ext_resources syscon syscon_power fdt dev/fb/fbd.c optional fbd | vt dev/fb/fb_if.m standard dev/fb/splash.c optional sc splash dev/fdt/fdt_clock.c optional fdt fdt_clock dev/fdt/fdt_clock_if.m optional fdt fdt_clock dev/fdt/fdt_common.c optional fdt dev/fdt/fdt_pinctrl.c optional fdt fdt_pinctrl dev/fdt/fdt_pinctrl_if.m optional fdt fdt_pinctrl dev/fdt/fdt_slicer.c optional fdt cfi | fdt mx25l | fdt n25q | fdt at45d dev/fdt/fdt_static_dtb.S optional fdt fdt_dtb_static \ dependency "${FDT_DTS_FILE:T:R}.dtb" dev/fdt/simplebus.c optional fdt dev/fdt/simple_mfd.c optional syscon fdt dev/filemon/filemon.c optional filemon dev/firewire/firewire.c optional firewire dev/firewire/fwcrom.c optional firewire dev/firewire/fwdev.c optional firewire dev/firewire/fwdma.c optional firewire dev/firewire/fwmem.c optional firewire dev/firewire/fwohci.c optional firewire dev/firewire/fwohci_pci.c optional firewire pci dev/firewire/if_fwe.c optional fwe dev/firewire/if_fwip.c optional fwip dev/firewire/sbp.c optional sbp dev/firewire/sbp_targ.c optional sbp_targ dev/flash/at45d.c optional at45d dev/flash/cqspi.c optional cqspi fdt xdma dev/flash/mx25l.c optional mx25l dev/flash/n25q.c optional n25q fdt dev/flash/qspi_if.m optional cqspi fdt | n25q fdt dev/fxp/if_fxp.c optional fxp dev/fxp/inphy.c optional fxp dev/gem/if_gem.c optional gem dev/gem/if_gem_pci.c optional gem pci dev/goldfish/goldfish_rtc.c optional goldfish_rtc fdt dev/gpio/dwgpio/dwgpio.c optional gpio dwgpio fdt dev/gpio/dwgpio/dwgpio_bus.c optional gpio dwgpio fdt dev/gpio/dwgpio/dwgpio_if.m optional gpio dwgpio fdt dev/gpio/gpiobacklight.c optional gpiobacklight fdt dev/gpio/gpiokeys.c optional gpiokeys fdt dev/gpio/gpiokeys_codes.c optional gpiokeys fdt dev/gpio/gpiobus.c optional gpio \ dependency "gpiobus_if.h" dev/gpio/gpioc.c optional gpio \ dependency "gpio_if.h" dev/gpio/gpioiic.c optional gpioiic dev/gpio/gpioled.c optional gpioled !fdt dev/gpio/gpioled_fdt.c optional gpioled fdt dev/gpio/gpiomdio.c optional gpiomdio mii_bitbang dev/gpio/gpiopower.c optional gpiopower fdt dev/gpio/gpioregulator.c optional gpioregulator fdt ext_resources dev/gpio/gpiospi.c optional gpiospi dev/gpio/gpioths.c optional gpioths dev/gpio/gpio_if.m optional gpio dev/gpio/gpiobus_if.m optional gpio dev/gpio/gpiopps.c optional gpiopps fdt dev/gpio/ofw_gpiobus.c optional fdt gpio dev/hid/hconf.c optional hconf dev/hid/hcons.c optional hcons dev/hid/hgame.c optional hgame dev/hid/hid.c optional hid dev/hid/hid_if.m optional hid dev/hid/hidbus.c optional hidbus dev/hid/hidmap.c optional hidmap dev/hid/hidquirk.c optional hid dev/hid/hidraw.c optional hidraw dev/hid/hkbd.c optional hkbd dev/hid/hms.c optional hms dev/hid/hmt.c optional hmt hconf dev/hid/hpen.c optional hpen dev/hid/hsctrl.c optional hsctrl dev/hid/ps4dshock.c optional ps4dshock dev/hid/xb360gp.c optional xb360gp dev/hifn/hifn7751.c optional hifn dev/hptiop/hptiop.c optional hptiop scbus dev/hwpmc/hwpmc_logging.c optional hwpmc dev/hwpmc/hwpmc_mod.c optional hwpmc dev/hwpmc/hwpmc_soft.c optional hwpmc dev/ichiic/ig4_acpi.c optional ig4 acpi iicbus dev/ichiic/ig4_iic.c optional ig4 iicbus dev/ichiic/ig4_pci.c optional ig4 pci iicbus dev/ichsmb/ichsmb.c optional ichsmb dev/ichsmb/ichsmb_pci.c optional ichsmb pci dev/ida/ida.c optional ida dev/ida/ida_disk.c optional ida dev/ida/ida_pci.c optional ida pci dev/iicbus/acpi_iicbus.c optional acpi iicbus dev/iicbus/ad7418.c optional ad7418 dev/iicbus/ads111x.c optional ads111x dev/iicbus/ds1307.c optional ds1307 dev/iicbus/ds13rtc.c optional ds13rtc | ds133x | ds1374 dev/iicbus/ds1672.c optional ds1672 dev/iicbus/ds3231.c optional ds3231 dev/iicbus/htu21.c optional htu21 dev/iicbus/icee.c optional icee dev/iicbus/if_ic.c optional ic dev/iicbus/iic.c optional iic dev/iicbus/iic_recover_bus.c optional iicbus dev/iicbus/iicbb.c optional iicbb dev/iicbus/iicbb_if.m optional iicbb dev/iicbus/iicbus.c optional iicbus dev/iicbus/iicbus_if.m optional iicbus dev/iicbus/iichid.c optional iichid acpi hid iicbus dev/iicbus/iiconf.c optional iicbus dev/iicbus/iicsmb.c optional iicsmb \ dependency "iicbus_if.h" dev/iicbus/iicoc.c optional iicoc dev/iicbus/iicoc_fdt.c optional iicoc ext_resources fdt dev/iicbus/iicoc_pci.c optional iicoc pci dev/iicbus/isl12xx.c optional isl12xx dev/iicbus/lm75.c optional lm75 dev/iicbus/max44009.c optional max44009 dev/iicbus/mux/pca9547.c optional pca9547 iicmux fdt dev/iicbus/mux/iicmux.c optional iicmux dev/iicbus/mux/iicmux_if.m optional iicmux dev/iicbus/mux/iic_gpiomux.c optional iic_gpiomux fdt dev/iicbus/mux/ltc430x.c optional ltc430x dev/iicbus/mux/pca954x.c optional pca954x dev/iicbus/nxprtc.c optional nxprtc | pcf8563 dev/iicbus/ofw_iicbus.c optional fdt iicbus dev/iicbus/pcf8574.c optional pcf8574 dev/iicbus/pcf8591.c optional pcf8591 dev/iicbus/rtc8583.c optional rtc8583 dev/iicbus/rtc/pcf85063.c optional pcf85063 iicbus fdt dev/iicbus/rtc/rx8803.c optional rx8803 iicbus fdt dev/iicbus/s35390a.c optional s35390a dev/iicbus/sy8106a.c optional sy8106a ext_resources fdt dev/iicbus/syr827.c optional syr827 ext_resources fdt dev/iicbus/gpio/tca6408.c optional tca6408 fdt gpio dev/iicbus/gpio/tca6416.c optional tca6416 fdt dev/iicbus/pmic/fan53555.c optional fan53555 ext_resources fdt dev/igc/if_igc.c optional igc iflib pci dev/igc/igc_api.c optional igc iflib pci dev/igc/igc_base.c optional igc iflib pci dev/igc/igc_i225.c optional igc iflib pci dev/igc/igc_mac.c optional igc iflib pci dev/igc/igc_nvm.c optional igc iflib pci dev/igc/igc_phy.c optional igc iflib pci dev/igc/igc_txrx.c optional igc iflib pci dev/intpm/intpm.c optional intpm pci # XXX Work around clang warning, until maintainer approves fix. dev/ips/ips.c optional ips \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/ips/ips_commands.c optional ips dev/ips/ips_disk.c optional ips dev/ips/ips_ioctl.c optional ips dev/ips/ips_pci.c optional ips pci dev/ipw/if_ipw.c optional ipw ipwbssfw.c optional ipwbssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_bss.fw:ipw_bss:130 -lintel_ipw -mipw_bss -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "ipwbssfw.c" ipw_bss.fwo optional ipwbssfw | ipwfw \ dependency "ipw_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_bss.fwo" ipw_bss.fw optional ipwbssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_bss.fw" ipwibssfw.c optional ipwibssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_ibss.fw:ipw_ibss:130 -lintel_ipw -mipw_ibss -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "ipwibssfw.c" ipw_ibss.fwo optional ipwibssfw | ipwfw \ dependency "ipw_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_ibss.fwo" ipw_ibss.fw optional ipwibssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-i.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_ibss.fw" ipwmonitorfw.c optional ipwmonitorfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_monitor.fw:ipw_monitor:130 -lintel_ipw -mipw_monitor -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "ipwmonitorfw.c" ipw_monitor.fwo optional ipwmonitorfw | ipwfw \ dependency "ipw_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_monitor.fwo" ipw_monitor.fw optional ipwmonitorfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-p.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_monitor.fw" dev/iscsi/icl.c optional iscsi dev/iscsi/icl_conn_if.m optional cfiscsi | iscsi dev/iscsi/icl_soft.c optional iscsi dev/iscsi/icl_soft_proxy.c optional iscsi dev/iscsi/iscsi.c optional iscsi scbus dev/ismt/ismt.c optional ismt dev/isl/isl.c optional isl iicbus dev/isp/isp.c optional isp dev/isp/isp_freebsd.c optional isp dev/isp/isp_library.c optional isp dev/isp/isp_pci.c optional isp pci dev/isp/isp_target.c optional isp dev/ispfw/ispfw.c optional ispfw dev/iwi/if_iwi.c optional iwi iwibssfw.c optional iwibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_bss.fw:iwi_bss:300 -lintel_iwi -miwi_bss -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwibssfw.c" iwi_bss.fwo optional iwibssfw | iwifw \ dependency "iwi_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_bss.fwo" iwi_bss.fw optional iwibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-bss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_bss.fw" iwiibssfw.c optional iwiibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_ibss.fw:iwi_ibss:300 -lintel_iwi -miwi_ibss -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwiibssfw.c" iwi_ibss.fwo optional iwiibssfw | iwifw \ dependency "iwi_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_ibss.fwo" iwi_ibss.fw optional iwiibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-ibss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_ibss.fw" iwimonitorfw.c optional iwimonitorfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_monitor.fw:iwi_monitor:300 -lintel_iwi -miwi_monitor -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwimonitorfw.c" iwi_monitor.fwo optional iwimonitorfw | iwifw \ dependency "iwi_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_monitor.fwo" iwi_monitor.fw optional iwimonitorfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-sniffer.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_monitor.fw" dev/iwm/if_iwm.c optional iwm dev/iwm/if_iwm_7000.c optional iwm dev/iwm/if_iwm_8000.c optional iwm dev/iwm/if_iwm_9000.c optional iwm dev/iwm/if_iwm_9260.c optional iwm dev/iwm/if_iwm_binding.c optional iwm dev/iwm/if_iwm_fw.c optional iwm dev/iwm/if_iwm_led.c optional iwm dev/iwm/if_iwm_mac_ctxt.c optional iwm dev/iwm/if_iwm_notif_wait.c optional iwm dev/iwm/if_iwm_pcie_trans.c optional iwm dev/iwm/if_iwm_phy_ctxt.c optional iwm dev/iwm/if_iwm_phy_db.c optional iwm dev/iwm/if_iwm_power.c optional iwm dev/iwm/if_iwm_scan.c optional iwm dev/iwm/if_iwm_sf.c optional iwm dev/iwm/if_iwm_sta.c optional iwm dev/iwm/if_iwm_time_event.c optional iwm dev/iwm/if_iwm_util.c optional iwm iwm3160fw.c optional iwm3160fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3160.fw:iwm3160fw -miwm3160fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm3160fw.c" iwm3160fw.fwo optional iwm3160fw | iwmfw \ dependency "iwm3160.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3160fw.fwo" iwm3160.fw optional iwm3160fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3160-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3160.fw" iwm3168fw.c optional iwm3168fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3168.fw:iwm3168fw -miwm3168fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm3168fw.c" iwm3168fw.fwo optional iwm3168fw | iwmfw \ dependency "iwm3168.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3168fw.fwo" iwm3168.fw optional iwm3168fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3168-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3168.fw" iwm7260fw.c optional iwm7260fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7260.fw:iwm7260fw -miwm7260fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm7260fw.c" iwm7260fw.fwo optional iwm7260fw | iwmfw \ dependency "iwm7260.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7260fw.fwo" iwm7260.fw optional iwm7260fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7260-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7260.fw" iwm7265fw.c optional iwm7265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265.fw:iwm7265fw -miwm7265fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm7265fw.c" iwm7265fw.fwo optional iwm7265fw | iwmfw \ dependency "iwm7265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265fw.fwo" iwm7265.fw optional iwm7265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265.fw" iwm7265Dfw.c optional iwm7265Dfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265D.fw:iwm7265Dfw -miwm7265Dfw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm7265Dfw.c" iwm7265Dfw.fwo optional iwm7265Dfw | iwmfw \ dependency "iwm7265D.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265Dfw.fwo" iwm7265D.fw optional iwm7265Dfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265D-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265D.fw" iwm8000Cfw.c optional iwm8000Cfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8000C.fw:iwm8000Cfw -miwm8000Cfw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm8000Cfw.c" iwm8000Cfw.fwo optional iwm8000Cfw | iwmfw \ dependency "iwm8000C.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8000Cfw.fwo" iwm8000C.fw optional iwm8000Cfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8000C-16.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8000C.fw" iwm8265.fw optional iwm8265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8265-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8265.fw" iwm8265fw.c optional iwm8265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8265.fw:iwm8265fw -miwm8265fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwm8265fw.c" iwm8265fw.fwo optional iwm8265fw | iwmfw \ dependency "iwm8265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8265fw.fwo" dev/iwn/if_iwn.c optional iwn iwn1000fw.c optional iwn1000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn1000.fw:iwn1000fw -miwn1000fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn1000fw.c" iwn1000fw.fwo optional iwn1000fw | iwnfw \ dependency "iwn1000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn1000fw.fwo" iwn1000.fw optional iwn1000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-1000-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn1000.fw" iwn100fw.c optional iwn100fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn100.fw:iwn100fw -miwn100fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn100fw.c" iwn100fw.fwo optional iwn100fw | iwnfw \ dependency "iwn100.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn100fw.fwo" iwn100.fw optional iwn100fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-100-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn100.fw" iwn105fw.c optional iwn105fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn105.fw:iwn105fw -miwn105fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn105fw.c" iwn105fw.fwo optional iwn105fw | iwnfw \ dependency "iwn105.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn105fw.fwo" iwn105.fw optional iwn105fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-105-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn105.fw" iwn135fw.c optional iwn135fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn135.fw:iwn135fw -miwn135fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn135fw.c" iwn135fw.fwo optional iwn135fw | iwnfw \ dependency "iwn135.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn135fw.fwo" iwn135.fw optional iwn135fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-135-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn135.fw" iwn2000fw.c optional iwn2000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2000.fw:iwn2000fw -miwn2000fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn2000fw.c" iwn2000fw.fwo optional iwn2000fw | iwnfw \ dependency "iwn2000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2000fw.fwo" iwn2000.fw optional iwn2000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-2000-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2000.fw" iwn2030fw.c optional iwn2030fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2030.fw:iwn2030fw -miwn2030fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn2030fw.c" iwn2030fw.fwo optional iwn2030fw | iwnfw \ dependency "iwn2030.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2030fw.fwo" iwn2030.fw optional iwn2030fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwnwifi-2030-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2030.fw" iwn4965fw.c optional iwn4965fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn4965.fw:iwn4965fw -miwn4965fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn4965fw.c" iwn4965fw.fwo optional iwn4965fw | iwnfw \ dependency "iwn4965.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn4965fw.fwo" iwn4965.fw optional iwn4965fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-4965-228.61.2.24.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn4965.fw" iwn5000fw.c optional iwn5000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5000.fw:iwn5000fw -miwn5000fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn5000fw.c" iwn5000fw.fwo optional iwn5000fw | iwnfw \ dependency "iwn5000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5000fw.fwo" iwn5000.fw optional iwn5000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5000-8.83.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5000.fw" iwn5150fw.c optional iwn5150fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5150.fw:iwn5150fw -miwn5150fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn5150fw.c" iwn5150fw.fwo optional iwn5150fw | iwnfw \ dependency "iwn5150.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5150fw.fwo" iwn5150.fw optional iwn5150fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5150-8.24.2.2.fw.uu"\ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5150.fw" iwn6000fw.c optional iwn6000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000.fw:iwn6000fw -miwn6000fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn6000fw.c" iwn6000fw.fwo optional iwn6000fw | iwnfw \ dependency "iwn6000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000fw.fwo" iwn6000.fw optional iwn6000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000-9.221.4.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000.fw" iwn6000g2afw.c optional iwn6000g2afw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2a.fw:iwn6000g2afw -miwn6000g2afw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn6000g2afw.c" iwn6000g2afw.fwo optional iwn6000g2afw | iwnfw \ dependency "iwn6000g2a.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2afw.fwo" iwn6000g2a.fw optional iwn6000g2afw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2a-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2a.fw" iwn6000g2bfw.c optional iwn6000g2bfw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2b.fw:iwn6000g2bfw -miwn6000g2bfw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn6000g2bfw.c" iwn6000g2bfw.fwo optional iwn6000g2bfw | iwnfw \ dependency "iwn6000g2b.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2bfw.fwo" iwn6000g2b.fw optional iwn6000g2bfw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2b-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2b.fw" iwn6050fw.c optional iwn6050fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6050.fw:iwn6050fw -miwn6050fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "iwn6050fw.c" iwn6050fw.fwo optional iwn6050fw | iwnfw \ dependency "iwn6050.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6050fw.fwo" iwn6050.fw optional iwn6050fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6050-41.28.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6050.fw" dev/ixgbe/if_ix.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_ixv.c optional ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_bypass.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_fdir.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_sriov.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ix_txrx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_osdep.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_phy.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_api.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_common.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_mbx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_vf.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x540.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x550.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/jedec_dimm/jedec_dimm.c optional jedec_dimm smbus dev/jme/if_jme.c optional jme pci dev/kbd/kbd.c optional atkbd | pckbd | sc | ukbd | vt | hkbd dev/kbdmux/kbdmux.c optional kbdmux dev/ksyms/ksyms.c optional ksyms dev/le/am7990.c optional le dev/le/am79900.c optional le dev/le/if_le_pci.c optional le pci dev/le/lance.c optional le dev/led/led.c standard dev/lge/if_lge.c optional lge dev/liquidio/base/cn23xx_pf_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_console.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_ctrl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_droq.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_mem_ops.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_request_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_response_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_core.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_ioctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_main.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rss.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rxtx.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_sysctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" lio.c optional lio \ compile-with "${AWK} -f $S/tools/fw_stub.awk lio_23xx_nic.bin.fw:lio_23xx_nic.bin -mlio_23xx_nic.bin -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "lio.c" lio_23xx_nic.bin.fw.fwo optional lio \ dependency "lio_23xx_nic.bin.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "lio_23xx_nic.bin.fw.fwo" lio_23xx_nic.bin.fw optional lio \ dependency "$S/contrib/dev/liquidio/lio_23xx_nic.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "lio_23xx_nic.bin.fw" dev/malo/if_malo.c optional malo dev/malo/if_malohal.c optional malo dev/malo/if_malo_pci.c optional malo pci dev/md/md.c optional md dev/mdio/mdio_if.m optional miiproxy | mdio dev/mdio/mdio.c optional miiproxy | mdio dev/mem/memdev.c optional mem dev/mem/memutil.c optional mem dev/mfi/mfi.c optional mfi dev/mfi/mfi_debug.c optional mfi dev/mfi/mfi_pci.c optional mfi pci dev/mfi/mfi_disk.c optional mfi dev/mfi/mfi_syspd.c optional mfi dev/mfi/mfi_tbolt.c optional mfi dev/mfi/mfi_cam.c optional mfip scbus dev/mii/acphy.c optional miibus | acphy dev/mii/amphy.c optional miibus | amphy dev/mii/atphy.c optional miibus | atphy dev/mii/axphy.c optional miibus | axphy dev/mii/bmtphy.c optional miibus | bmtphy dev/mii/brgphy.c optional miibus | brgphy dev/mii/ciphy.c optional miibus | ciphy dev/mii/dp83822phy.c optional miibus | dp83822phy dev/mii/dp83867phy.c optional miibus | dp83867phy dev/mii/e1000phy.c optional miibus | e1000phy dev/mii/gentbi.c optional miibus | gentbi dev/mii/icsphy.c optional miibus | icsphy dev/mii/ip1000phy.c optional miibus | ip1000phy dev/mii/jmphy.c optional miibus | jmphy dev/mii/lxtphy.c optional miibus | lxtphy dev/mii/micphy.c optional miibus fdt | micphy fdt dev/mii/mii.c optional miibus | mii dev/mii/mii_bitbang.c optional miibus | mii_bitbang dev/mii/mii_physubr.c optional miibus | mii dev/mii/mii_fdt.c optional miibus fdt | mii fdt dev/mii/miibus_if.m optional miibus | mii dev/mii/nsgphy.c optional miibus | nsgphy dev/mii/nsphy.c optional miibus | nsphy dev/mii/nsphyter.c optional miibus | nsphyter dev/mii/pnaphy.c optional miibus | pnaphy dev/mii/qsphy.c optional miibus | qsphy dev/mii/rdcphy.c optional miibus | rdcphy dev/mii/rgephy.c optional miibus | rgephy dev/mii/rlphy.c optional miibus | rlphy dev/mii/rlswitch.c optional rlswitch dev/mii/smcphy.c optional miibus | smcphy dev/mii/smscphy.c optional miibus | smscphy dev/mii/tdkphy.c optional miibus | tdkphy dev/mii/truephy.c optional miibus | truephy dev/mii/ukphy.c optional miibus | mii dev/mii/ukphy_subr.c optional miibus | mii dev/mii/vscphy.c optional miibus | vscphy dev/mii/xmphy.c optional miibus | xmphy dev/mlxfw/mlxfw_fsm.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlxfw/mlxfw_mfa2.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlxfw/mlxfw_mfa2_tlv_multi.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlx/mlx.c optional mlx dev/mlx/mlx_disk.c optional mlx dev/mlx/mlx_pci.c optional mlx pci dev/mmc/mmc_subr.c optional mmc | mmcsd !mmccam dev/mmc/mmc.c optional mmc !mmccam dev/mmc/mmcbr_if.m standard dev/mmc/mmcbus_if.m standard dev/mmc/mmcsd.c optional mmcsd !mmccam dev/mmc/mmc_fdt_helpers.c optional ext_resources mmc fdt | ext_resources mmccam fdt dev/mmc/mmc_helpers.c optional ext_resources mmc | ext_resources mmccam dev/mmc/mmc_pwrseq.c optional ext_resources mmc fdt | ext_resources mmccam fdt dev/mmc/mmc_pwrseq_if.m optional ext_resources mmc fdt | ext_resources mmccam fdt dev/mmcnull/mmcnull.c optional mmcnull dev/mpr/mpr.c optional mpr dev/mpr/mpr_config.c optional mpr # XXX Work around clang warning, until maintainer approves fix. dev/mpr/mpr_mapping.c optional mpr \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mpr/mpr_pci.c optional mpr pci dev/mpr/mpr_sas.c optional mpr \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mpr/mpr_sas_lsi.c optional mpr dev/mpr/mpr_table.c optional mpr dev/mpr/mpr_user.c optional mpr dev/mps/mps.c optional mps dev/mps/mps_config.c optional mps # XXX Work around clang warning, until maintainer approves fix. dev/mps/mps_mapping.c optional mps \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mps/mps_pci.c optional mps pci dev/mps/mps_sas.c optional mps \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mps/mps_sas_lsi.c optional mps dev/mps/mps_table.c optional mps dev/mps/mps_user.c optional mps dev/mpt/mpt.c optional mpt dev/mpt/mpt_cam.c optional mpt dev/mpt/mpt_debug.c optional mpt dev/mpt/mpt_pci.c optional mpt pci dev/mpt/mpt_raid.c optional mpt dev/mpt/mpt_user.c optional mpt dev/mrsas/mrsas.c optional mrsas dev/mrsas/mrsas_cam.c optional mrsas dev/mrsas/mrsas_ioctl.c optional mrsas dev/mrsas/mrsas_fp.c optional mrsas dev/msk/if_msk.c optional msk dev/mvs/mvs.c optional mvs dev/mvs/mvs_if.m optional mvs dev/mvs/mvs_pci.c optional mvs pci dev/mwl/if_mwl.c optional mwl dev/mwl/if_mwl_pci.c optional mwl pci dev/mwl/mwlhal.c optional mwl mwlfw.c optional mwlfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk mw88W8363.fw:mw88W8363fw mwlboot.fw:mwlboot -mmwl -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "mwlfw.c" mw88W8363.fwo optional mwlfw \ dependency "mw88W8363.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mw88W8363.fwo" mw88W8363.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mw88W8363.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mw88W8363.fw" mwlboot.fwo optional mwlfw \ dependency "mwlboot.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mwlboot.fwo" mwlboot.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mwlboot.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mwlboot.fw" dev/mxge/if_mxge.c optional mxge pci dev/mxge/mxge_eth_z8e.c optional mxge pci dev/mxge/mxge_ethp_z8e.c optional mxge pci dev/mxge/mxge_rss_eth_z8e.c optional mxge pci dev/mxge/mxge_rss_ethp_z8e.c optional mxge pci dev/my/if_my.c optional my dev/netmap/if_ptnet.c optional netmap inet dev/netmap/netmap.c optional netmap dev/netmap/netmap_bdg.c optional netmap dev/netmap/netmap_freebsd.c optional netmap dev/netmap/netmap_generic.c optional netmap dev/netmap/netmap_kloop.c optional netmap dev/netmap/netmap_legacy.c optional netmap dev/netmap/netmap_mbq.c optional netmap dev/netmap/netmap_mem2.c optional netmap dev/netmap/netmap_monitor.c optional netmap dev/netmap/netmap_null.c optional netmap dev/netmap/netmap_offloadings.c optional netmap dev/netmap/netmap_pipe.c optional netmap dev/netmap/netmap_vale.c optional netmap # compile-with "${NORMAL_C} -Wconversion -Wextra" dev/nfsmb/nfsmb.c optional nfsmb pci dev/nge/if_nge.c optional nge dev/nmdm/nmdm.c optional nmdm dev/null/null.c standard dev/nvd/nvd.c optional nvd nvme dev/nvme/nvme.c optional nvme dev/nvme/nvme_ahci.c optional nvme ahci dev/nvme/nvme_ctrlr.c optional nvme dev/nvme/nvme_ctrlr_cmd.c optional nvme dev/nvme/nvme_ns.c optional nvme dev/nvme/nvme_ns_cmd.c optional nvme dev/nvme/nvme_pci.c optional nvme pci dev/nvme/nvme_qpair.c optional nvme dev/nvme/nvme_sim.c optional nvme scbus dev/nvme/nvme_sysctl.c optional nvme dev/nvme/nvme_test.c optional nvme dev/nvme/nvme_util.c optional nvme dev/oce/oce_hw.c optional oce pci dev/oce/oce_if.c optional oce pci dev/oce/oce_mbox.c optional oce pci dev/oce/oce_queue.c optional oce pci dev/oce/oce_sysctl.c optional oce pci dev/oce/oce_util.c optional oce pci dev/ocs_fc/ocs_gendump.c optional ocs_fc pci dev/ocs_fc/ocs_pci.c optional ocs_fc pci dev/ocs_fc/ocs_ioctl.c optional ocs_fc pci dev/ocs_fc/ocs_os.c optional ocs_fc pci dev/ocs_fc/ocs_utils.c optional ocs_fc pci dev/ocs_fc/ocs_hw.c optional ocs_fc pci dev/ocs_fc/ocs_hw_queues.c optional ocs_fc pci dev/ocs_fc/sli4.c optional ocs_fc pci dev/ocs_fc/ocs_sm.c optional ocs_fc pci dev/ocs_fc/ocs_device.c optional ocs_fc pci dev/ocs_fc/ocs_xport.c optional ocs_fc pci dev/ocs_fc/ocs_domain.c optional ocs_fc pci dev/ocs_fc/ocs_sport.c optional ocs_fc pci dev/ocs_fc/ocs_els.c optional ocs_fc pci dev/ocs_fc/ocs_fabric.c optional ocs_fc pci dev/ocs_fc/ocs_io.c optional ocs_fc pci dev/ocs_fc/ocs_node.c optional ocs_fc pci dev/ocs_fc/ocs_scsi.c optional ocs_fc pci dev/ocs_fc/ocs_unsol.c optional ocs_fc pci dev/ocs_fc/ocs_ddump.c optional ocs_fc pci dev/ocs_fc/ocs_mgmt.c optional ocs_fc pci dev/ocs_fc/ocs_cam.c optional ocs_fc pci dev/ofw/ofw_bus_if.m optional fdt dev/ofw/ofw_bus_subr.c optional fdt dev/ofw/ofw_cpu.c optional fdt dev/ofw/ofw_fdt.c optional fdt dev/ofw/ofw_if.m optional fdt dev/ofw/ofw_graph.c optional fdt dev/ofw/ofw_subr.c optional fdt dev/ofw/ofwbus.c optional fdt dev/ofw/openfirm.c optional fdt dev/ofw/openfirmio.c optional fdt dev/ow/ow.c optional ow \ dependency "owll_if.h" \ dependency "own_if.h" dev/ow/owll_if.m optional ow dev/ow/own_if.m optional ow dev/ow/ow_temp.c optional ow_temp dev/ow/owc_gpiobus.c optional owc gpio dev/pbio/pbio.c optional pbio isa dev/pccard/pccard.c optional pccard dev/pccard/pccard_cis.c optional pccard dev/pccard/pccard_cis_quirks.c optional pccard dev/pccard/pccard_device.c optional pccard dev/pccbb/pccbb.c optional cbb dev/pccbb/pccbb_pci.c optional cbb pci dev/pcf/pcf.c optional pcf dev/pci/fixup_pci.c optional pci dev/pci/hostb_pci.c optional pci dev/pci/ignore_pci.c optional pci dev/pci/isa_pci.c optional pci isa dev/pci/pci.c optional pci dev/pci/pci_if.m standard dev/pci/pci_iov.c optional pci pci_iov dev/pci/pci_iov_if.m standard dev/pci/pci_iov_schema.c optional pci pci_iov dev/pci/pci_pci.c optional pci dev/pci/pci_subr.c optional pci dev/pci/pci_user.c optional pci dev/pci/pcib_if.m standard dev/pci/pcib_support.c standard dev/pci/vga_pci.c optional pci dev/pms/freebsd/driver/ini/src/agtiapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sadisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saframe.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sahw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sainit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampicmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampirsp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saphy.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasata.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sassp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/satimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sautil.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saioctlcmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpidebug.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmsmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmdisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/sminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsatcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdesgl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdioctl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdhw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/ossacmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tddmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdsmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdtimers.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdio.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itddisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/ossasat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/ppbus/if_plip.c optional plip dev/ppbus/lpbb.c optional lpbb dev/ppbus/lpt.c optional lpt dev/ppbus/pcfclock.c optional pcfclock dev/ppbus/ppb_1284.c optional ppbus dev/ppbus/ppb_base.c optional ppbus dev/ppbus/ppb_msq.c optional ppbus dev/ppbus/ppbconf.c optional ppbus dev/ppbus/ppbus_if.m optional ppbus dev/ppbus/ppi.c optional ppi dev/ppbus/pps.c optional pps dev/ppc/ppc.c optional ppc dev/ppc/ppc_acpi.c optional ppc acpi dev/ppc/ppc_isa.c optional ppc isa dev/ppc/ppc_pci.c optional ppc pci dev/ppc/ppc_puc.c optional ppc puc dev/proto/proto_bus_isa.c optional proto acpi | proto isa dev/proto/proto_bus_pci.c optional proto pci dev/proto/proto_busdma.c optional proto dev/proto/proto_core.c optional proto dev/pst/pst-iop.c optional pst dev/pst/pst-pci.c optional pst pci dev/pst/pst-raid.c optional pst dev/pty/pty.c optional pty dev/puc/puc.c optional puc dev/puc/puc_cfg.c optional puc dev/puc/puc_pci.c optional puc pci dev/pwm/pwmc.c optional pwm | pwmc dev/pwm/pwmbus.c optional pwm | pwmbus dev/pwm/pwmbus_if.m optional pwm | pwmbus dev/pwm/ofw_pwm.c optional pwm fdt | pwmbus fdt dev/pwm/ofw_pwmbus.c optional pwm fdt | pwmbus fdt dev/pwm/pwm_backlight.c optional pwm pwm_backlight ext_resources fdt dev/quicc/quicc_core.c optional quicc dev/ral/rt2560.c optional ral dev/ral/rt2661.c optional ral dev/ral/rt2860.c optional ral dev/ral/if_ral_pci.c optional ral pci rt2561fw.c optional rt2561fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561.fw:rt2561fw -mrt2561 -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rt2561fw.c" rt2561fw.fwo optional rt2561fw | ralfw \ dependency "rt2561.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561fw.fwo" rt2561.fw optional rt2561fw | ralfw \ dependency "$S/contrib/dev/ral/rt2561.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561.fw" rt2561sfw.c optional rt2561sfw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561s.fw:rt2561sfw -mrt2561s -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rt2561sfw.c" rt2561sfw.fwo optional rt2561sfw | ralfw \ dependency "rt2561s.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561sfw.fwo" rt2561s.fw optional rt2561sfw | ralfw \ dependency "$S/contrib/dev/ral/rt2561s.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561s.fw" rt2661fw.c optional rt2661fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2661.fw:rt2661fw -mrt2661 -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rt2661fw.c" rt2661fw.fwo optional rt2661fw | ralfw \ dependency "rt2661.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2661fw.fwo" rt2661.fw optional rt2661fw | ralfw \ dependency "$S/contrib/dev/ral/rt2661.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2661.fw" rt2860fw.c optional rt2860fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2860.fw:rt2860fw -mrt2860 -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rt2860fw.c" rt2860fw.fwo optional rt2860fw | ralfw \ dependency "rt2860.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2860fw.fwo" rt2860.fw optional rt2860fw | ralfw \ dependency "$S/contrib/dev/ral/rt2860.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2860.fw" dev/random/random_infra.c standard dev/random/random_harvestq.c standard dev/random/randomdev.c optional !random_loadable dev/random/fenestrasX/fx_brng.c optional !random_loadable random_fenestrasx dev/random/fenestrasX/fx_main.c optional !random_loadable random_fenestrasx \ compile-with "${NORMAL_C} -I$S/crypto/blake2" dev/random/fenestrasX/fx_pool.c optional !random_loadable random_fenestrasx \ compile-with "${NORMAL_C} -I$S/crypto/blake2" dev/random/fenestrasX/fx_rng.c optional !random_loadable random_fenestrasx \ compile-with "${NORMAL_C} -I$S/crypto/blake2" dev/random/fortuna.c optional !random_loadable !random_fenestrasx dev/random/hash.c optional !random_loadable dev/rccgpio/rccgpio.c optional rccgpio gpio dev/re/if_re.c optional re dev/rl/if_rl.c optional rl pci dev/rndtest/rndtest.c optional rndtest # dev/rtsx/rtsx.c optional rtsx pci # dev/rtwn/if_rtwn.c optional rtwn dev/rtwn/if_rtwn_beacon.c optional rtwn dev/rtwn/if_rtwn_calib.c optional rtwn dev/rtwn/if_rtwn_cam.c optional rtwn dev/rtwn/if_rtwn_efuse.c optional rtwn dev/rtwn/if_rtwn_fw.c optional rtwn dev/rtwn/if_rtwn_rx.c optional rtwn dev/rtwn/if_rtwn_task.c optional rtwn dev/rtwn/if_rtwn_tx.c optional rtwn # dev/rtwn/pci/rtwn_pci_attach.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_reg.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_rx.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_tx.c optional rtwn_pci pci # dev/rtwn/usb/rtwn_usb_attach.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_ep.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_reg.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_rx.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_tx.c optional rtwn_usb # RTL8188E dev/rtwn/rtl8188e/r88e_beacon.c optional rtwn dev/rtwn/rtl8188e/r88e_calib.c optional rtwn dev/rtwn/rtl8188e/r88e_chan.c optional rtwn dev/rtwn/rtl8188e/r88e_fw.c optional rtwn dev/rtwn/rtl8188e/r88e_init.c optional rtwn dev/rtwn/rtl8188e/r88e_led.c optional rtwn dev/rtwn/rtl8188e/r88e_tx.c optional rtwn dev/rtwn/rtl8188e/r88e_rf.c optional rtwn dev/rtwn/rtl8188e/r88e_rom.c optional rtwn dev/rtwn/rtl8188e/r88e_rx.c optional rtwn dev/rtwn/rtl8188e/pci/r88ee_attach.c optional rtwn_pci pci dev/rtwn/rtl8188e/pci/r88ee_init.c optional rtwn_pci pci dev/rtwn/rtl8188e/pci/r88ee_rx.c optional rtwn_pci pci dev/rtwn/rtl8188e/usb/r88eu_attach.c optional rtwn_usb dev/rtwn/rtl8188e/usb/r88eu_init.c optional rtwn_usb # RTL8192C dev/rtwn/rtl8192c/r92c_attach.c optional rtwn dev/rtwn/rtl8192c/r92c_beacon.c optional rtwn dev/rtwn/rtl8192c/r92c_calib.c optional rtwn dev/rtwn/rtl8192c/r92c_chan.c optional rtwn dev/rtwn/rtl8192c/r92c_fw.c optional rtwn dev/rtwn/rtl8192c/r92c_init.c optional rtwn dev/rtwn/rtl8192c/r92c_llt.c optional rtwn dev/rtwn/rtl8192c/r92c_rf.c optional rtwn dev/rtwn/rtl8192c/r92c_rom.c optional rtwn dev/rtwn/rtl8192c/r92c_rx.c optional rtwn dev/rtwn/rtl8192c/r92c_tx.c optional rtwn dev/rtwn/rtl8192c/pci/r92ce_attach.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_calib.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_fw.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_init.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_led.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_rx.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_tx.c optional rtwn_pci pci dev/rtwn/rtl8192c/usb/r92cu_attach.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_init.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_led.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_rx.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_tx.c optional rtwn_usb # RTL8192E dev/rtwn/rtl8192e/r92e_chan.c optional rtwn dev/rtwn/rtl8192e/r92e_fw.c optional rtwn dev/rtwn/rtl8192e/r92e_init.c optional rtwn dev/rtwn/rtl8192e/r92e_led.c optional rtwn dev/rtwn/rtl8192e/r92e_rf.c optional rtwn dev/rtwn/rtl8192e/r92e_rom.c optional rtwn dev/rtwn/rtl8192e/r92e_rx.c optional rtwn dev/rtwn/rtl8192e/usb/r92eu_attach.c optional rtwn_usb dev/rtwn/rtl8192e/usb/r92eu_init.c optional rtwn_usb # RTL8812A dev/rtwn/rtl8812a/r12a_beacon.c optional rtwn dev/rtwn/rtl8812a/r12a_calib.c optional rtwn dev/rtwn/rtl8812a/r12a_caps.c optional rtwn dev/rtwn/rtl8812a/r12a_chan.c optional rtwn dev/rtwn/rtl8812a/r12a_fw.c optional rtwn dev/rtwn/rtl8812a/r12a_init.c optional rtwn dev/rtwn/rtl8812a/r12a_led.c optional rtwn dev/rtwn/rtl8812a/r12a_rf.c optional rtwn dev/rtwn/rtl8812a/r12a_rom.c optional rtwn dev/rtwn/rtl8812a/r12a_rx.c optional rtwn dev/rtwn/rtl8812a/r12a_tx.c optional rtwn dev/rtwn/rtl8812a/usb/r12au_attach.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_init.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_rx.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_tx.c optional rtwn_usb # RTL8821A dev/rtwn/rtl8821a/r21a_beacon.c optional rtwn dev/rtwn/rtl8821a/r21a_calib.c optional rtwn dev/rtwn/rtl8821a/r21a_chan.c optional rtwn dev/rtwn/rtl8821a/r21a_fw.c optional rtwn dev/rtwn/rtl8821a/r21a_init.c optional rtwn dev/rtwn/rtl8821a/r21a_led.c optional rtwn dev/rtwn/rtl8821a/r21a_rom.c optional rtwn dev/rtwn/rtl8821a/r21a_rx.c optional rtwn dev/rtwn/rtl8821a/usb/r21au_attach.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_dfs.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_init.c optional rtwn_usb rtwn-rtl8188eefw.c optional rtwn-rtl8188eefw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8188eefw.fw:rtwn-rtl8188eefw:111 -mrtwn-rtl8188eefw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8188eefw.c" rtwn-rtl8188eefw.fwo optional rtwn-rtl8188eefw | rtwnfw \ dependency "rtwn-rtl8188eefw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8188eefw.fwo" rtwn-rtl8188eefw.fw optional rtwn-rtl8188eefw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8188eefw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8188eefw.fw" rtwn-rtl8188eufw.c optional rtwn-rtl8188eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8188eufw.fw:rtwn-rtl8188eufw:111 -mrtwn-rtl8188eufw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8188eufw.c" rtwn-rtl8188eufw.fwo optional rtwn-rtl8188eufw | rtwnfw \ dependency "rtwn-rtl8188eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8188eufw.fwo" rtwn-rtl8188eufw.fw optional rtwn-rtl8188eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8188eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8188eufw.fw" rtwn-rtl8192cfwE.c optional rtwn-rtl8192cfwE | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE.fw:rtwn-rtl8192cfwE:111 -mrtwn-rtl8192cfwE -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE.c" rtwn-rtl8192cfwE.fwo optional rtwn-rtl8192cfwE | rtwnfw \ dependency "rtwn-rtl8192cfwE.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE.fwo" rtwn-rtl8192cfwE.fw optional rtwn-rtl8192cfwE | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE.fw" rtwn-rtl8192cfwE_B.c optional rtwn-rtl8192cfwE_B | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE_B.fw:rtwn-rtl8192cfwE_B:111 -mrtwn-rtl8192cfwE_B -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE_B.c" rtwn-rtl8192cfwE_B.fwo optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "rtwn-rtl8192cfwE_B.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fwo" rtwn-rtl8192cfwE_B.fw optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE_B.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fw" rtwn-rtl8192cfwT.c optional rtwn-rtl8192cfwT | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwT.fw:rtwn-rtl8192cfwT:111 -mrtwn-rtl8192cfwT -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwT.c" rtwn-rtl8192cfwT.fwo optional rtwn-rtl8192cfwT | rtwnfw \ dependency "rtwn-rtl8192cfwT.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwT.fwo" rtwn-rtl8192cfwT.fw optional rtwn-rtl8192cfwT | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwT.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwT.fw" rtwn-rtl8192cfwU.c optional rtwn-rtl8192cfwU | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwU.fw:rtwn-rtl8192cfwU:111 -mrtwn-rtl8192cfwU -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwU.c" rtwn-rtl8192cfwU.fwo optional rtwn-rtl8192cfwU | rtwnfw \ dependency "rtwn-rtl8192cfwU.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwU.fwo" rtwn-rtl8192cfwU.fw optional rtwn-rtl8192cfwU | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwU.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwU.fw" rtwn-rtl8192eufw.c optional rtwn-rtl8192eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192eufw.fw:rtwn-rtl8192eufw:111 -mrtwn-rtl8192eufw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8192eufw.c" rtwn-rtl8192eufw.fwo optional rtwn-rtl8192eufw | rtwnfw \ dependency "rtwn-rtl8192eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192eufw.fwo" rtwn-rtl8192eufw.fw optional rtwn-rtl8192eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192eufw.fw" rtwn-rtl8812aufw.c optional rtwn-rtl8812aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8812aufw.fw:rtwn-rtl8812aufw:111 -mrtwn-rtl8812aufw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8812aufw.c" rtwn-rtl8812aufw.fwo optional rtwn-rtl8812aufw | rtwnfw \ dependency "rtwn-rtl8812aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8812aufw.fwo" rtwn-rtl8812aufw.fw optional rtwn-rtl8812aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8812aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8812aufw.fw" rtwn-rtl8821aufw.c optional rtwn-rtl8821aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8821aufw.fw:rtwn-rtl8821aufw:111 -mrtwn-rtl8821aufw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rtwn-rtl8821aufw.c" rtwn-rtl8821aufw.fwo optional rtwn-rtl8821aufw | rtwnfw \ dependency "rtwn-rtl8821aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8821aufw.fwo" rtwn-rtl8821aufw.fw optional rtwn-rtl8821aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8821aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8821aufw.fw" dev/safe/safe.c optional safe dev/scc/scc_if.m optional scc dev/scc/scc_bfe_quicc.c optional scc quicc dev/scc/scc_core.c optional scc dev/scc/scc_dev_quicc.c optional scc quicc dev/scc/scc_dev_z8530.c optional scc dev/sdhci/sdhci.c optional sdhci dev/sdhci/sdhci_fdt.c optional sdhci fdt dev/sdhci/sdhci_fdt_gpio.c optional sdhci fdt gpio dev/sdhci/sdhci_fsl_fdt.c optional sdhci ext_resources fdt gpio dev/sdhci/sdhci_if.m optional sdhci dev/sdhci/sdhci_acpi.c optional sdhci acpi dev/sdhci/sdhci_pci.c optional sdhci pci dev/sdio/sdio_if.m optional mmccam dev/sdio/sdio_subr.c optional mmccam dev/sdio/sdiob.c optional mmccam dev/sge/if_sge.c optional sge pci dev/siis/siis.c optional siis pci dev/sis/if_sis.c optional sis pci dev/sk/if_sk.c optional sk pci dev/smbios/smbios.c optional smbios dev/smbus/smb.c optional smb dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smbus_if.m optional smbus dev/smc/if_smc.c optional smc dev/smc/if_smc_acpi.c optional smc acpi dev/smc/if_smc_fdt.c optional smc fdt dev/snp/snp.c optional snp dev/sound/clone.c optional sound dev/sound/unit.c optional sound dev/sound/isa/ad1816.c optional snd_ad1816 isa dev/sound/isa/ess.c optional snd_ess isa dev/sound/isa/gusc.c optional snd_gusc isa dev/sound/isa/mss.c optional snd_mss isa dev/sound/isa/sb16.c optional snd_sb16 isa dev/sound/isa/sb8.c optional snd_sb8 isa dev/sound/isa/sbc.c optional snd_sbc isa dev/sound/isa/sndbuf_dma.c optional sound isa dev/sound/pci/als4000.c optional snd_als4000 pci dev/sound/pci/atiixp.c optional snd_atiixp pci dev/sound/pci/cmi.c optional snd_cmi pci dev/sound/pci/cs4281.c optional snd_cs4281 pci dev/sound/pci/csa.c optional snd_csa pci dev/sound/pci/csapcm.c optional snd_csa pci dev/sound/pci/ds1.c optional snd_ds1 pci dev/sound/pci/emu10k1.c optional snd_emu10k1 pci dev/sound/pci/emu10kx.c optional snd_emu10kx pci dev/sound/pci/emu10kx-pcm.c optional snd_emu10kx pci dev/sound/pci/emu10kx-midi.c optional snd_emu10kx pci dev/sound/pci/envy24.c optional snd_envy24 pci dev/sound/pci/envy24ht.c optional snd_envy24ht pci dev/sound/pci/es137x.c optional snd_es137x pci dev/sound/pci/fm801.c optional snd_fm801 pci dev/sound/pci/ich.c optional snd_ich pci dev/sound/pci/maestro.c optional snd_maestro pci dev/sound/pci/maestro3.c optional snd_maestro3 pci dev/sound/pci/neomagic.c optional snd_neomagic pci dev/sound/pci/solo.c optional snd_solo pci dev/sound/pci/spicds.c optional snd_spicds pci dev/sound/pci/t4dwave.c optional snd_t4dwave pci dev/sound/pci/via8233.c optional snd_via8233 pci dev/sound/pci/via82c686.c optional snd_via82c686 pci dev/sound/pci/vibes.c optional snd_vibes pci dev/sound/pci/hda/hdaa.c optional snd_hda pci dev/sound/pci/hda/hdaa_patches.c optional snd_hda pci dev/sound/pci/hda/hdac.c optional snd_hda pci dev/sound/pci/hda/hdac_if.m optional snd_hda pci dev/sound/pci/hda/hdacc.c optional snd_hda pci dev/sound/pci/hdspe.c optional snd_hdspe pci dev/sound/pci/hdspe-pcm.c optional snd_hdspe pci dev/sound/pcm/ac97.c optional sound dev/sound/pcm/ac97_if.m optional sound dev/sound/pcm/ac97_patch.c optional sound dev/sound/pcm/buffer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/channel.c optional sound dev/sound/pcm/channel_if.m optional sound dev/sound/pcm/dsp.c optional sound dev/sound/pcm/feeder.c optional sound dev/sound/pcm/feeder_chain.c optional sound dev/sound/pcm/feeder_eq.c optional sound \ dependency "feeder_eq_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_if.m optional sound dev/sound/pcm/feeder_format.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_matrix.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_mixer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_rate.c optional sound \ dependency "feeder_rate_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_volume.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/mixer.c optional sound dev/sound/pcm/mixer_if.m optional sound dev/sound/pcm/sndstat.c optional sound dev/sound/pcm/sound.c optional sound dev/sound/pcm/vchan.c optional sound dev/sound/usb/uaudio.c optional snd_uaudio usb dev/sound/usb/uaudio_pcm.c optional snd_uaudio usb dev/sound/midi/midi.c optional sound dev/sound/midi/mpu401.c optional sound dev/sound/midi/mpu_if.m optional sound dev/sound/midi/mpufoi_if.m optional sound dev/sound/midi/sequencer.c optional sound dev/sound/midi/synth_if.m optional sound dev/spibus/ofw_spibus.c optional fdt spibus dev/spibus/spibus.c optional spibus \ dependency "spibus_if.h" dev/spibus/spigen.c optional spigen dev/spibus/spibus_if.m optional spibus dev/ste/if_ste.c optional ste pci dev/stge/if_stge.c optional stge dev/sym/sym_hipd.c optional sym \ dependency "$S/dev/sym/sym_{conf,defs}.h" dev/syscons/blank/blank_saver.c optional blank_saver dev/syscons/daemon/daemon_saver.c optional daemon_saver dev/syscons/dragon/dragon_saver.c optional dragon_saver dev/syscons/fade/fade_saver.c optional fade_saver dev/syscons/fire/fire_saver.c optional fire_saver dev/syscons/green/green_saver.c optional green_saver dev/syscons/logo/logo.c optional logo_saver dev/syscons/logo/logo_saver.c optional logo_saver dev/syscons/rain/rain_saver.c optional rain_saver dev/syscons/schistory.c optional sc dev/syscons/scmouse.c optional sc dev/syscons/scterm.c optional sc dev/syscons/scterm-dumb.c optional sc !SC_NO_TERM_DUMB dev/syscons/scterm-sc.c optional sc !SC_NO_TERM_SC dev/syscons/scterm-teken.c optional sc !SC_NO_TERM_TEKEN dev/syscons/scvidctl.c optional sc dev/syscons/scvtb.c optional sc dev/syscons/snake/snake_saver.c optional snake_saver dev/syscons/star/star_saver.c optional star_saver dev/syscons/syscons.c optional sc dev/syscons/sysmouse.c optional sc dev/syscons/warp/warp_saver.c optional warp_saver dev/tcp_log/tcp_log_dev.c optional tcp_blackbox inet | tcp_blackbox inet6 dev/tdfx/tdfx_pci.c optional tdfx pci dev/ti/if_ti.c optional ti pci dev/twa/tw_cl_init.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_intr.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_io.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_misc.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_cam.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_freebsd.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twe/twe.c optional twe dev/twe/twe_freebsd.c optional twe dev/tws/tws.c optional tws dev/tws/tws_cam.c optional tws dev/tws/tws_hdm.c optional tws dev/tws/tws_services.c optional tws dev/tws/tws_user.c optional tws dev/uart/uart_bus_acpi.c optional uart acpi dev/uart/uart_bus_fdt.c optional uart fdt dev/uart/uart_bus_isa.c optional uart isa dev/uart/uart_bus_pci.c optional uart pci dev/uart/uart_bus_puc.c optional uart puc dev/uart/uart_bus_scc.c optional uart scc dev/uart/uart_core.c optional uart dev/uart/uart_cpu_acpi.c optional uart acpi dev/uart/uart_dbg.c optional uart gdb dev/uart/uart_dev_imx.c optional uart uart_imx fdt dev/uart/uart_dev_msm.c optional uart uart_msm fdt dev/uart/uart_dev_mvebu.c optional uart uart_mvebu dev/uart/uart_dev_ns8250.c optional uart uart_ns8250 | uart uart_snps dev/uart/uart_dev_pl011.c optional uart pl011 dev/uart/uart_dev_quicc.c optional uart quicc dev/uart/uart_dev_snps.c optional uart uart_snps fdt dev/uart/uart_dev_z8530.c optional uart uart_z8530 | uart scc dev/uart/uart_if.m optional uart dev/uart/uart_subr.c optional uart dev/uart/uart_tty.c optional uart # # USB controller drivers # dev/usb/controller/musb_otg.c optional musb dev/usb/controller/dwc_otg.c optional dwcotg dev/usb/controller/dwc_otg_fdt.c optional dwcotg fdt dev/usb/controller/dwc_otg_acpi.c optional dwcotg acpi dev/usb/controller/ehci.c optional ehci dev/usb/controller/ehci_msm.c optional ehci_msm fdt dev/usb/controller/ehci_pci.c optional ehci pci dev/usb/controller/ohci.c optional ohci dev/usb/controller/ohci_pci.c optional ohci pci dev/usb/controller/uhci.c optional uhci dev/usb/controller/uhci_pci.c optional uhci pci dev/usb/controller/xhci.c optional xhci dev/usb/controller/xhci_pci.c optional xhci pci dev/usb/controller/saf1761_otg.c optional saf1761otg dev/usb/controller/saf1761_otg_fdt.c optional saf1761otg fdt dev/usb/controller/uss820dci.c optional uss820dci dev/usb/controller/usb_controller.c optional usb # # USB storage drivers # dev/usb/storage/cfumass.c optional cfumass ctl dev/usb/storage/umass.c optional umass dev/usb/storage/urio.c optional urio dev/usb/storage/ustorage_fs.c optional usfs # # USB core # dev/usb/usb_busdma.c optional usb dev/usb/usb_core.c optional usb dev/usb/usb_debug.c optional usb dev/usb/usb_dev.c optional usb dev/usb/usb_device.c optional usb dev/usb/usb_dynamic.c optional usb dev/usb/usb_error.c optional usb dev/usb/usb_fdt_support.c optional usb fdt dev/usb/usb_generic.c optional usb dev/usb/usb_handle_request.c optional usb dev/usb/usb_hid.c optional usb dev/usb/usb_hub.c optional usb dev/usb/usb_hub_acpi.c optional uacpi acpi dev/usb/usb_if.m optional usb dev/usb/usb_lookup.c optional usb dev/usb/usb_mbuf.c optional usb dev/usb/usb_msctest.c optional usb dev/usb/usb_parse.c optional usb dev/usb/usb_pf.c optional usb dev/usb/usb_process.c optional usb dev/usb/usb_request.c optional usb dev/usb/usb_transfer.c optional usb dev/usb/usb_util.c optional usb # # USB network drivers # dev/usb/net/if_aue.c optional aue dev/usb/net/if_axe.c optional axe dev/usb/net/if_axge.c optional axge dev/usb/net/if_cdce.c optional cdce dev/usb/net/if_cdceem.c optional cdceem dev/usb/net/if_cue.c optional cue dev/usb/net/if_ipheth.c optional ipheth dev/usb/net/if_kue.c optional kue dev/usb/net/if_mos.c optional mos dev/usb/net/if_muge.c optional muge dev/usb/net/if_rue.c optional rue dev/usb/net/if_smsc.c optional smsc dev/usb/net/if_udav.c optional udav dev/usb/net/if_ure.c optional ure dev/usb/net/if_usie.c optional usie dev/usb/net/if_urndis.c optional urndis dev/usb/net/ruephy.c optional rue dev/usb/net/usb_ethernet.c optional uether | aue | axe | axge | cdce | \ cdceem | cue | ipheth | kue | mos | \ rue | smsc | udav | ure | urndis | muge dev/usb/net/uhso.c optional uhso # # USB WLAN drivers # dev/usb/wlan/if_rsu.c optional rsu rsu-rtl8712fw.c optional rsu-rtl8712fw | rsufw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rsu-rtl8712fw.fw:rsu-rtl8712fw:120 -mrsu-rtl8712fw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "rsu-rtl8712fw.c" rsu-rtl8712fw.fwo optional rsu-rtl8712fw | rsufw \ dependency "rsu-rtl8712fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rsu-rtl8712fw.fwo" rsu-rtl8712fw.fw optional rsu-rtl8712.fw | rsufw \ dependency "$S/contrib/dev/rsu/rsu-rtl8712fw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rsu-rtl8712fw.fw" dev/usb/wlan/if_rum.c optional rum dev/usb/wlan/if_run.c optional run runfw.c optional runfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk run.fw:runfw -mrunfw -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "runfw.c" runfw.fwo optional runfw \ dependency "run.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "runfw.fwo" run.fw optional runfw \ dependency "$S/contrib/dev/run/rt2870.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "run.fw" dev/usb/wlan/if_uath.c optional uath dev/usb/wlan/if_upgt.c optional upgt dev/usb/wlan/if_ural.c optional ural dev/usb/wlan/if_urtw.c optional urtw dev/usb/wlan/if_zyd.c optional zyd # # USB serial and parallel port drivers # dev/usb/serial/u3g.c optional u3g dev/usb/serial/uark.c optional uark dev/usb/serial/ubsa.c optional ubsa dev/usb/serial/ubser.c optional ubser dev/usb/serial/uchcom.c optional uchcom dev/usb/serial/ucycom.c optional ucycom dev/usb/serial/ufoma.c optional ufoma dev/usb/serial/uftdi.c optional uftdi dev/usb/serial/ugensa.c optional ugensa dev/usb/serial/uipaq.c optional uipaq dev/usb/serial/ulpt.c optional ulpt dev/usb/serial/umcs.c optional umcs dev/usb/serial/umct.c optional umct dev/usb/serial/umodem.c optional umodem dev/usb/serial/umoscom.c optional umoscom dev/usb/serial/uplcom.c optional uplcom dev/usb/serial/uslcom.c optional uslcom dev/usb/serial/uvisor.c optional uvisor dev/usb/serial/uvscom.c optional uvscom dev/usb/serial/usb_serial.c optional ucom | u3g | uark | ubsa | ubser | \ uchcom | ucycom | ufoma | uftdi | \ ugensa | uipaq | umcs | umct | \ umodem | umoscom | uplcom | usie | \ uslcom | uvisor | uvscom # # USB misc drivers # dev/usb/misc/cp2112.c optional cp2112 dev/usb/misc/udbp.c optional udbp dev/usb/misc/ugold.c optional ugold dev/usb/misc/uled.c optional uled # # USB input drivers # dev/usb/input/atp.c optional atp dev/usb/input/uep.c optional uep dev/usb/input/uhid.c optional uhid dev/usb/input/uhid_snes.c optional uhid_snes dev/usb/input/ukbd.c optional ukbd dev/usb/input/ums.c optional ums dev/usb/input/usbhid.c optional usbhid dev/usb/input/wmt.c optional wmt dev/usb/input/wsp.c optional wsp # # USB quirks # dev/usb/quirk/usb_quirk.c optional usb # # USB templates # dev/usb/template/usb_template.c optional usb_template dev/usb/template/usb_template_audio.c optional usb_template dev/usb/template/usb_template_cdce.c optional usb_template dev/usb/template/usb_template_kbd.c optional usb_template dev/usb/template/usb_template_modem.c optional usb_template dev/usb/template/usb_template_mouse.c optional usb_template dev/usb/template/usb_template_msc.c optional usb_template dev/usb/template/usb_template_mtp.c optional usb_template dev/usb/template/usb_template_phone.c optional usb_template dev/usb/template/usb_template_serialnet.c optional usb_template dev/usb/template/usb_template_midi.c optional usb_template dev/usb/template/usb_template_multi.c optional usb_template dev/usb/template/usb_template_cdceem.c optional usb_template # # USB video drivers # dev/usb/video/udl.c optional udl # # USB END # dev/videomode/videomode.c optional videomode dev/videomode/edid.c optional videomode dev/videomode/pickmode.c optional videomode dev/videomode/vesagtf.c optional videomode dev/veriexec/verified_exec.c optional mac_veriexec dev/vge/if_vge.c optional vge dev/viapm/viapm.c optional viapm pci dev/virtio/virtio.c optional virtio dev/virtio/virtqueue.c optional virtio dev/virtio/virtio_bus_if.m optional virtio dev/virtio/virtio_if.m optional virtio dev/virtio/pci/virtio_pci.c optional virtio_pci dev/virtio/pci/virtio_pci_if.m optional virtio_pci dev/virtio/pci/virtio_pci_legacy.c optional virtio_pci dev/virtio/pci/virtio_pci_modern.c optional virtio_pci dev/virtio/mmio/virtio_mmio.c optional virtio_mmio dev/virtio/mmio/virtio_mmio_acpi.c optional virtio_mmio acpi dev/virtio/mmio/virtio_mmio_fdt.c optional virtio_mmio fdt dev/virtio/mmio/virtio_mmio_if.m optional virtio_mmio dev/virtio/network/if_vtnet.c optional vtnet dev/virtio/block/virtio_blk.c optional virtio_blk dev/virtio/balloon/virtio_balloon.c optional virtio_balloon dev/virtio/scsi/virtio_scsi.c optional virtio_scsi dev/virtio/random/virtio_random.c optional virtio_random dev/virtio/console/virtio_console.c optional virtio_console dev/vkbd/vkbd.c optional vkbd dev/vmgenc/vmgenc_acpi.c optional acpi dev/vmware/vmxnet3/if_vmx.c optional vmx dev/vmware/vmci/vmci.c optional vmci dev/vmware/vmci/vmci_datagram.c optional vmci dev/vmware/vmci/vmci_doorbell.c optional vmci dev/vmware/vmci/vmci_driver.c optional vmci dev/vmware/vmci/vmci_event.c optional vmci dev/vmware/vmci/vmci_hashtable.c optional vmci dev/vmware/vmci/vmci_kernel_if.c optional vmci dev/vmware/vmci/vmci_qpair.c optional vmci dev/vmware/vmci/vmci_queue_pair.c optional vmci dev/vmware/vmci/vmci_resource.c optional vmci dev/vmware/pvscsi/pvscsi.c optional pvscsi dev/vr/if_vr.c optional vr pci dev/vt/colors/vt_termcolors.c optional vt dev/vt/font/vt_font_default.c optional vt dev/vt/font/vt_mouse_cursor.c optional vt dev/vt/hw/efifb/efifb.c optional vt_efifb dev/vt/hw/vbefb/vbefb.c optional vt_vbefb dev/vt/hw/fb/vt_fb.c optional vt dev/vt/hw/vga/vt_vga.c optional vt vt_vga dev/vt/logo/logo_freebsd.c optional vt splash dev/vt/logo/logo_beastie.c optional vt splash dev/vt/vt_buf.c optional vt dev/vt/vt_consolectl.c optional vt dev/vt/vt_core.c optional vt dev/vt/vt_cpulogos.c optional vt splash dev/vt/vt_font.c optional vt dev/vt/vt_sysmouse.c optional vt dev/vte/if_vte.c optional vte pci dev/watchdog/watchdog.c standard dev/wpi/if_wpi.c optional wpi pci wpifw.c optional wpifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk wpi.fw:wpifw:153229 -mwpi -c${.TARGET}" \ no-ctfconvert no-implicit-rule before-depend local \ clean "wpifw.c" wpifw.fwo optional wpifw \ dependency "wpi.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "wpifw.fwo" wpi.fw optional wpifw \ dependency "$S/contrib/dev/wpi/iwlwifi-3945-15.32.2.9.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "wpi.fw" dev/xdma/controller/pl330.c optional xdma pl330 dev/xdma/xdma.c optional xdma dev/xdma/xdma_bank.c optional xdma dev/xdma/xdma_bio.c optional xdma dev/xdma/xdma_fdt_test.c optional xdma xdma_test fdt dev/xdma/xdma_if.m optional xdma dev/xdma/xdma_iommu.c optional xdma dev/xdma/xdma_mbuf.c optional xdma dev/xdma/xdma_queue.c optional xdma dev/xdma/xdma_sg.c optional xdma dev/xdma/xdma_sglist.c optional xdma dev/xen/balloon/balloon.c optional xenhvm dev/xen/blkfront/blkfront.c optional xenhvm dev/xen/blkback/blkback.c optional xenhvm dev/xen/bus/xenpv.c optional xenhvm dev/xen/console/xen_console.c optional xenhvm dev/xen/control/control.c optional xenhvm dev/xen/efi/pvefi.c optional xenhvm efirt dev/xen/grant_table/grant_table.c optional xenhvm dev/xen/netback/netback.c optional xenhvm dev/xen/netfront/netfront.c optional xenhvm dev/xen/timer/timer.c optional xenhvm xentimer dev/xen/xenpci/xenpci.c optional xenpci dev/xen/xenstore/xenstore.c optional xenhvm dev/xen/xenstore/xenstore_dev.c optional xenhvm dev/xen/xenstore/xenstored_dev.c optional xenhvm dev/xen/evtchn/evtchn_dev.c optional xenhvm dev/xen/privcmd/privcmd.c optional xenhvm dev/xen/gntdev/gntdev.c optional xenhvm dev/xen/debug/debug.c optional xenhvm dev/xl/if_xl.c optional xl pci dev/xl/xlphy.c optional xl pci fs/autofs/autofs.c optional autofs fs/autofs/autofs_vfsops.c optional autofs fs/autofs/autofs_vnops.c optional autofs fs/deadfs/dead_vnops.c standard fs/devfs/devfs_devs.c standard fs/devfs/devfs_dir.c standard fs/devfs/devfs_rule.c standard fs/devfs/devfs_vfsops.c standard fs/devfs/devfs_vnops.c standard fs/fdescfs/fdesc_vfsops.c optional fdescfs fs/fdescfs/fdesc_vnops.c optional fdescfs fs/fifofs/fifo_vnops.c standard fs/cuse/cuse.c optional cuse fs/fuse/fuse_device.c optional fusefs fs/fuse/fuse_file.c optional fusefs fs/fuse/fuse_internal.c optional fusefs fs/fuse/fuse_io.c optional fusefs fs/fuse/fuse_ipc.c optional fusefs fs/fuse/fuse_main.c optional fusefs fs/fuse/fuse_node.c optional fusefs fs/fuse/fuse_vfsops.c optional fusefs fs/fuse/fuse_vnops.c optional fusefs fs/mntfs/mntfs_vnops.c standard fs/msdosfs/msdosfs_conv.c optional msdosfs fs/msdosfs/msdosfs_denode.c optional msdosfs fs/msdosfs/msdosfs_fat.c optional msdosfs fs/msdosfs/msdosfs_iconv.c optional msdosfs_iconv fs/msdosfs/msdosfs_lookup.c optional msdosfs fs/msdosfs/msdosfs_vfsops.c optional msdosfs fs/msdosfs/msdosfs_vnops.c optional msdosfs fs/nfs/nfs_commonkrpc.c optional nfscl | nfslockd | nfsd fs/nfs/nfs_commonsubs.c optional nfscl | nfslockd | nfsd fs/nfs/nfs_commonport.c optional nfscl | nfslockd | nfsd fs/nfs/nfs_commonacl.c optional nfscl | nfslockd | nfsd fs/nfsclient/nfs_clcomsubs.c optional nfscl fs/nfsclient/nfs_clsubs.c optional nfscl fs/nfsclient/nfs_clstate.c optional nfscl fs/nfsclient/nfs_clkrpc.c optional nfscl fs/nfsclient/nfs_clrpcops.c optional nfscl fs/nfsclient/nfs_clvnops.c optional nfscl fs/nfsclient/nfs_clnode.c optional nfscl fs/nfsclient/nfs_clvfsops.c optional nfscl fs/nfsclient/nfs_clport.c optional nfscl fs/nfsclient/nfs_clbio.c optional nfscl fs/nfsclient/nfs_clnfsiod.c optional nfscl fs/nfsserver/nfs_fha_new.c optional nfsd inet fs/nfsserver/nfs_nfsdsocket.c optional nfsd inet fs/nfsserver/nfs_nfsdsubs.c optional nfsd inet fs/nfsserver/nfs_nfsdstate.c optional nfsd inet fs/nfsserver/nfs_nfsdkrpc.c optional nfsd inet fs/nfsserver/nfs_nfsdserv.c optional nfsd inet fs/nfsserver/nfs_nfsdport.c optional nfsd inet fs/nfsserver/nfs_nfsdcache.c optional nfsd inet fs/nullfs/null_subr.c optional nullfs fs/nullfs/null_vfsops.c optional nullfs fs/nullfs/null_vnops.c optional nullfs fs/procfs/procfs.c optional procfs fs/procfs/procfs_dbregs.c optional procfs fs/procfs/procfs_fpregs.c optional procfs fs/procfs/procfs_map.c optional procfs fs/procfs/procfs_mem.c optional procfs fs/procfs/procfs_note.c optional procfs fs/procfs/procfs_osrel.c optional procfs fs/procfs/procfs_regs.c optional procfs fs/procfs/procfs_rlimit.c optional procfs fs/procfs/procfs_status.c optional procfs fs/procfs/procfs_type.c optional procfs fs/pseudofs/pseudofs.c optional pseudofs fs/pseudofs/pseudofs_fileno.c optional pseudofs fs/pseudofs/pseudofs_vncache.c optional pseudofs fs/pseudofs/pseudofs_vnops.c optional pseudofs fs/smbfs/smbfs_io.c optional smbfs fs/smbfs/smbfs_node.c optional smbfs fs/smbfs/smbfs_smb.c optional smbfs fs/smbfs/smbfs_subr.c optional smbfs fs/smbfs/smbfs_vfsops.c optional smbfs fs/smbfs/smbfs_vnops.c optional smbfs fs/udf/osta.c optional udf fs/udf/udf_iconv.c optional udf_iconv fs/udf/udf_vfsops.c optional udf fs/udf/udf_vnops.c optional udf fs/unionfs/union_subr.c optional unionfs fs/unionfs/union_vfsops.c optional unionfs fs/unionfs/union_vnops.c optional unionfs fs/tmpfs/tmpfs_vnops.c optional tmpfs fs/tmpfs/tmpfs_fifoops.c optional tmpfs fs/tmpfs/tmpfs_vfsops.c optional tmpfs fs/tmpfs/tmpfs_subr.c optional tmpfs gdb/gdb_cons.c optional gdb gdb/gdb_main.c optional gdb gdb/gdb_packet.c optional gdb gdb/netgdb.c optional ddb debugnet gdb netgdb inet geom/bde/g_bde.c optional geom_bde geom/bde/g_bde_crypt.c optional geom_bde geom/bde/g_bde_lock.c optional geom_bde geom/bde/g_bde_work.c optional geom_bde geom/cache/g_cache.c optional geom_cache geom/concat/g_concat.c optional geom_concat geom/eli/g_eli.c optional geom_eli geom/eli/g_eli_crypto.c optional geom_eli geom/eli/g_eli_ctl.c optional geom_eli geom/eli/g_eli_hmac.c optional geom_eli geom/eli/g_eli_integrity.c optional geom_eli geom/eli/g_eli_key.c optional geom_eli geom/eli/g_eli_key_cache.c optional geom_eli geom/eli/g_eli_privacy.c optional geom_eli geom/eli/pkcs5v2.c optional geom_eli geom/gate/g_gate.c optional geom_gate geom/geom_bsd_enc.c optional geom_part_bsd geom/geom_ccd.c optional ccd | geom_ccd geom/geom_ctl.c standard geom/geom_dev.c standard geom/geom_disk.c standard geom/geom_dump.c standard geom/geom_event.c standard geom/geom_flashmap.c optional fdt cfi | fdt mx25l | mmcsd | fdt n25q | fdt at45d geom/geom_io.c standard geom/geom_kern.c standard geom/geom_map.c optional geom_map geom/geom_redboot.c optional geom_redboot geom/geom_slice.c standard geom/geom_subr.c standard geom/geom_vfs.c standard geom/journal/g_journal.c optional geom_journal geom/journal/g_journal_ufs.c optional geom_journal geom/label/g_label.c optional geom_label | geom_label_gpt geom/label/g_label_ext2fs.c optional geom_label geom/label/g_label_flashmap.c optional geom_label geom/label/g_label_iso9660.c optional geom_label geom/label/g_label_msdosfs.c optional geom_label geom/label/g_label_ntfs.c optional geom_label geom/label/g_label_reiserfs.c optional geom_label geom/label/g_label_ufs.c optional geom_label geom/label/g_label_gpt.c optional geom_label | geom_label_gpt geom/label/g_label_disk_ident.c optional geom_label geom/linux_lvm/g_linux_lvm.c optional geom_linux_lvm geom/mirror/g_mirror.c optional geom_mirror geom/mirror/g_mirror_ctl.c optional geom_mirror geom/mountver/g_mountver.c optional geom_mountver geom/multipath/g_multipath.c optional geom_multipath geom/nop/g_nop.c optional geom_nop geom/part/g_part.c standard geom/part/g_part_if.m standard geom/part/g_part_apm.c optional geom_part_apm geom/part/g_part_bsd.c optional geom_part_bsd geom/part/g_part_bsd64.c optional geom_part_bsd64 geom/part/g_part_ebr.c optional geom_part_ebr geom/part/g_part_gpt.c optional geom_part_gpt geom/part/g_part_ldm.c optional geom_part_ldm geom/part/g_part_mbr.c optional geom_part_mbr geom/part/g_part_vtoc8.c optional geom_part_vtoc8 geom/raid/g_raid.c optional geom_raid geom/raid/g_raid_ctl.c optional geom_raid geom/raid/g_raid_md_if.m optional geom_raid geom/raid/g_raid_tr_if.m optional geom_raid geom/raid/md_ddf.c optional geom_raid geom/raid/md_intel.c optional geom_raid geom/raid/md_jmicron.c optional geom_raid geom/raid/md_nvidia.c optional geom_raid geom/raid/md_promise.c optional geom_raid geom/raid/md_sii.c optional geom_raid geom/raid/tr_concat.c optional geom_raid geom/raid/tr_raid0.c optional geom_raid geom/raid/tr_raid1.c optional geom_raid geom/raid/tr_raid1e.c optional geom_raid geom/raid/tr_raid5.c optional geom_raid geom/raid3/g_raid3.c optional geom_raid3 geom/raid3/g_raid3_ctl.c optional geom_raid3 geom/shsec/g_shsec.c optional geom_shsec geom/stripe/g_stripe.c optional geom_stripe geom/uzip/g_uzip.c optional geom_uzip geom/uzip/g_uzip_lzma.c optional geom_uzip geom/uzip/g_uzip_wrkthr.c optional geom_uzip geom/uzip/g_uzip_zlib.c optional geom_uzip geom/uzip/g_uzip_zstd.c optional geom_uzip zstdio \ compile-with "${NORMAL_C} -I$S/contrib/zstd/lib/freebsd" geom/vinum/geom_vinum.c optional geom_vinum geom/vinum/geom_vinum_create.c optional geom_vinum geom/vinum/geom_vinum_drive.c optional geom_vinum geom/vinum/geom_vinum_plex.c optional geom_vinum geom/vinum/geom_vinum_volume.c optional geom_vinum geom/vinum/geom_vinum_subr.c optional geom_vinum geom/vinum/geom_vinum_raid5.c optional geom_vinum geom/vinum/geom_vinum_share.c optional geom_vinum geom/vinum/geom_vinum_list.c optional geom_vinum geom/vinum/geom_vinum_rm.c optional geom_vinum geom/vinum/geom_vinum_init.c optional geom_vinum geom/vinum/geom_vinum_state.c optional geom_vinum geom/vinum/geom_vinum_rename.c optional geom_vinum geom/vinum/geom_vinum_move.c optional geom_vinum geom/vinum/geom_vinum_events.c optional geom_vinum geom/virstor/binstream.c optional geom_virstor geom/virstor/g_virstor.c optional geom_virstor geom/virstor/g_virstor_md.c optional geom_virstor geom/zero/g_zero.c optional geom_zero fs/ext2fs/ext2_acl.c optional ext2fs fs/ext2fs/ext2_alloc.c optional ext2fs fs/ext2fs/ext2_balloc.c optional ext2fs fs/ext2fs/ext2_bmap.c optional ext2fs fs/ext2fs/ext2_csum.c optional ext2fs fs/ext2fs/ext2_extattr.c optional ext2fs fs/ext2fs/ext2_extents.c optional ext2fs fs/ext2fs/ext2_inode.c optional ext2fs fs/ext2fs/ext2_inode_cnv.c optional ext2fs fs/ext2fs/ext2_hash.c optional ext2fs fs/ext2fs/ext2_htree.c optional ext2fs fs/ext2fs/ext2_lookup.c optional ext2fs fs/ext2fs/ext2_subr.c optional ext2fs fs/ext2fs/ext2_vfsops.c optional ext2fs fs/ext2fs/ext2_vnops.c optional ext2fs # isa/isa_if.m standard isa/isa_common.c optional isa isa/isahint.c optional isa isa/pnp.c optional isa isapnp isa/pnpparse.c optional isa isapnp fs/cd9660/cd9660_bmap.c optional cd9660 fs/cd9660/cd9660_lookup.c optional cd9660 fs/cd9660/cd9660_node.c optional cd9660 fs/cd9660/cd9660_rrip.c optional cd9660 fs/cd9660/cd9660_util.c optional cd9660 fs/cd9660/cd9660_vfsops.c optional cd9660 fs/cd9660/cd9660_vnops.c optional cd9660 fs/cd9660/cd9660_iconv.c optional cd9660_iconv gnu/gcov/gcc_4_7.c optional gcov \ warning "kernel contains GPL licensed gcov support" gnu/gcov/gcov_fs.c optional gcov lindebugfs \ compile-with "${LINUXKPI_C}" gnu/gcov/gcov_subr.c optional gcov kern/bus_if.m standard kern/clock_if.m standard kern/cpufreq_if.m standard kern/device_if.m standard kern/imgact_binmisc.c optional imagact_binmisc kern/imgact_elf.c standard kern/imgact_elf32.c optional compat_freebsd32 kern/imgact_shell.c standard kern/init_main.c standard kern/init_sysent.c standard kern/ksched.c optional _kposix_priority_scheduling kern/kern_acct.c standard kern/kern_alq.c optional alq kern/kern_clock.c standard kern/kern_clocksource.c standard kern/kern_condvar.c standard kern/kern_conf.c standard kern/kern_cons.c standard kern/kern_cpu.c standard kern/kern_cpuset.c standard kern/kern_context.c standard kern/kern_descrip.c standard kern/kern_dtrace.c optional kdtrace_hooks kern/kern_dump.c standard kern/kern_environment.c standard kern/kern_et.c standard kern/kern_event.c standard kern/kern_exec.c standard kern/kern_exit.c standard kern/kern_fail.c standard kern/kern_ffclock.c standard kern/kern_fork.c standard kern/kern_hhook.c standard kern/kern_idle.c standard kern/kern_intr.c standard kern/kern_jail.c standard kern/kern_kcov.c optional kcov \ compile-with "${NORMAL_C:N-fsanitize*} ${NORMAL_C:M-fsanitize=kernel-memory}" kern/kern_khelp.c standard kern/kern_kthread.c standard kern/kern_ktr.c optional ktr kern/kern_ktrace.c standard kern/kern_linker.c standard kern/kern_lock.c standard kern/kern_lockf.c standard kern/kern_lockstat.c optional kdtrace_hooks kern/kern_loginclass.c standard kern/kern_malloc.c standard kern/kern_mbuf.c standard kern/kern_mib.c standard kern/kern_module.c standard kern/kern_mtxpool.c standard kern/kern_mutex.c standard kern/kern_ntptime.c standard kern/kern_osd.c standard kern/kern_physio.c standard kern/kern_pmc.c standard kern/kern_poll.c optional device_polling kern/kern_priv.c standard kern/kern_proc.c standard kern/kern_procctl.c standard kern/kern_prot.c standard kern/kern_racct.c standard kern/kern_rangelock.c standard kern/kern_rctl.c standard kern/kern_resource.c standard kern/kern_rmlock.c standard kern/kern_rwlock.c standard kern/kern_sdt.c optional kdtrace_hooks kern/kern_sema.c standard kern/kern_sendfile.c standard kern/kern_sharedpage.c standard kern/kern_shutdown.c standard kern/kern_sig.c standard kern/kern_switch.c standard kern/kern_sx.c standard kern/kern_synch.c standard kern/kern_syscalls.c standard kern/kern_sysctl.c standard kern/kern_tc.c standard kern/kern_thr.c standard kern/kern_thread.c standard kern/kern_time.c standard kern/kern_timeout.c standard kern/kern_tslog.c optional tslog kern/kern_ubsan.c optional kubsan kern/kern_umtx.c standard kern/kern_uuid.c standard kern/kern_xxx.c standard kern/link_elf.c standard kern/linker_if.m standard kern/md4c.c optional netsmb kern/md5c.c standard kern/p1003_1b.c standard kern/posix4_mib.c standard kern/sched_4bsd.c optional sched_4bsd kern/sched_ule.c optional sched_ule kern/serdev_if.m standard kern/stack_protector.c standard \ compile-with "${NORMAL_C:N-fstack-protector*}" kern/subr_acl_nfs4.c optional ufs_acl | zfs kern/subr_acl_posix1e.c optional ufs_acl kern/subr_asan.c optional kasan \ compile-with "${NORMAL_C:N-fsanitize*}" kern/subr_autoconf.c standard kern/subr_blist.c standard kern/subr_boot.c standard kern/subr_bus.c standard kern/subr_bus_dma.c standard kern/subr_bufring.c standard kern/subr_capability.c standard kern/subr_clock.c standard kern/subr_compressor.c standard \ compile-with "${NORMAL_C} -I$S/contrib/zstd/lib/freebsd" kern/subr_coverage.c optional coverage \ compile-with "${NORMAL_C:N-fsanitize*}" kern/subr_counter.c standard kern/subr_csan.c optional kcsan \ compile-with "${NORMAL_C:N-fsanitize*}" kern/subr_devstat.c standard kern/subr_disk.c standard kern/subr_early.c standard kern/subr_epoch.c standard kern/subr_eventhandler.c standard kern/subr_fattime.c standard kern/subr_firmware.c optional firmware kern/subr_filter.c standard kern/subr_gtaskqueue.c standard kern/subr_hash.c standard kern/subr_hints.c standard kern/subr_kdb.c standard kern/subr_kobj.c standard kern/subr_lock.c standard kern/subr_log.c standard kern/subr_mchain.c optional libmchain kern/subr_module.c standard kern/subr_msan.c optional kmsan \ compile-with "${NORMAL_C:N-fsanitize*}" kern/subr_msgbuf.c standard kern/subr_param.c standard kern/subr_pcpu.c standard kern/subr_pctrie.c standard kern/subr_pidctrl.c standard kern/subr_power.c standard kern/subr_prf.c standard kern/subr_prng.c standard kern/subr_prof.c standard kern/subr_rangeset.c standard kern/subr_rman.c standard kern/subr_rtc.c standard kern/subr_sbuf.c standard kern/subr_scanf.c standard kern/subr_sglist.c standard kern/subr_sleepqueue.c standard kern/subr_smp.c standard kern/subr_smr.c standard kern/subr_stack.c optional ddb | stack | ktr kern/subr_stats.c optional stats kern/subr_taskqueue.c standard kern/subr_terminal.c optional vt kern/subr_trap.c standard kern/subr_turnstile.c standard kern/subr_uio.c standard kern/subr_unit.c standard kern/subr_vmem.c standard kern/subr_witness.c optional witness kern/sys_capability.c standard kern/sys_eventfd.c standard kern/sys_generic.c standard kern/sys_getrandom.c standard kern/sys_pipe.c standard kern/sys_procdesc.c standard kern/sys_process.c standard kern/sys_socket.c standard kern/syscalls.c standard kern/sysv_ipc.c standard kern/sysv_msg.c optional sysvmsg kern/sysv_sem.c optional sysvsem kern/sysv_shm.c optional sysvshm kern/tty.c standard kern/tty_compat.c optional compat_43tty kern/tty_info.c standard kern/tty_inq.c standard kern/tty_outq.c standard kern/tty_pts.c standard kern/tty_tty.c standard kern/tty_ttydisc.c standard kern/uipc_accf.c standard kern/uipc_debug.c optional ddb kern/uipc_domain.c standard kern/uipc_ktls.c optional kern_tls kern/uipc_mbuf.c standard kern/uipc_mbuf2.c standard kern/uipc_mbufhash.c standard kern/uipc_mqueue.c optional p1003_1b_mqueue kern/uipc_sem.c optional p1003_1b_semaphores kern/uipc_shm.c standard kern/uipc_sockbuf.c standard kern/uipc_socket.c standard kern/uipc_syscalls.c standard kern/uipc_usrreq.c standard kern/vfs_acl.c standard kern/vfs_aio.c standard kern/vfs_bio.c standard kern/vfs_cache.c standard kern/vfs_cluster.c standard kern/vfs_default.c standard kern/vfs_export.c standard kern/vfs_extattr.c standard kern/vfs_hash.c standard kern/vfs_init.c standard kern/vfs_lookup.c standard kern/vfs_mount.c standard kern/vfs_mountroot.c standard kern/vfs_subr.c standard kern/vfs_syscalls.c standard kern/vfs_vnops.c standard # # Kernel GSS-API # gssd.h optional kgssapi \ dependency "$S/kgssapi/gssd.x" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -hM $S/kgssapi/gssd.x | grep -v pthread.h > gssd.h" \ no-obj no-implicit-rule before-depend local \ clean "gssd.h" gssd_xdr.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -c $S/kgssapi/gssd.x -o gssd_xdr.c" \ no-ctfconvert no-implicit-rule before-depend local \ clean "gssd_xdr.c" gssd_clnt.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -lM $S/kgssapi/gssd.x | grep -v string.h > gssd_clnt.c" \ no-ctfconvert no-implicit-rule before-depend local \ clean "gssd_clnt.c" kgssapi/gss_accept_sec_context.c optional kgssapi kgssapi/gss_add_oid_set_member.c optional kgssapi kgssapi/gss_acquire_cred.c optional kgssapi kgssapi/gss_canonicalize_name.c optional kgssapi kgssapi/gss_create_empty_oid_set.c optional kgssapi kgssapi/gss_delete_sec_context.c optional kgssapi kgssapi/gss_display_status.c optional kgssapi kgssapi/gss_export_name.c optional kgssapi kgssapi/gss_get_mic.c optional kgssapi kgssapi/gss_init_sec_context.c optional kgssapi kgssapi/gss_impl.c optional kgssapi kgssapi/gss_import_name.c optional kgssapi kgssapi/gss_names.c optional kgssapi kgssapi/gss_pname_to_uid.c optional kgssapi kgssapi/gss_release_buffer.c optional kgssapi kgssapi/gss_release_cred.c optional kgssapi kgssapi/gss_release_name.c optional kgssapi kgssapi/gss_release_oid_set.c optional kgssapi kgssapi/gss_set_cred_option.c optional kgssapi kgssapi/gss_test_oid_set_member.c optional kgssapi kgssapi/gss_unwrap.c optional kgssapi kgssapi/gss_verify_mic.c optional kgssapi kgssapi/gss_wrap.c optional kgssapi kgssapi/gss_wrap_size_limit.c optional kgssapi kgssapi/gssd_prot.c optional kgssapi kgssapi/krb5/krb5_mech.c optional kgssapi kgssapi/krb5/kcrypto.c optional kgssapi kgssapi/krb5/kcrypto_aes.c optional kgssapi kgssapi/kgss_if.m optional kgssapi kgssapi/gsstest.c optional kgssapi_debug # These files in libkern/ are those needed by all architectures. Some # of the files in libkern/ are only needed on some architectures, e.g., # libkern/divdi3.c is needed by i386 but not alpha. Also, some of these # routines may be optimized for a particular platform. In either case, # the file should be moved to conf/files. from here. # libkern/arc4random.c standard libkern/arc4random_uniform.c standard libkern/asprintf.c standard libkern/bcd.c standard libkern/bsearch.c standard libkern/explicit_bzero.c standard libkern/fnmatch.c standard libkern/gsb_crc32.c standard libkern/iconv.c optional libiconv libkern/iconv_converter_if.m optional libiconv libkern/iconv_ucs.c optional libiconv libkern/iconv_xlat.c optional libiconv libkern/iconv_xlat16.c optional libiconv libkern/inet_aton.c standard libkern/inet_ntoa.c standard libkern/inet_ntop.c standard libkern/inet_pton.c standard libkern/jenkins_hash.c standard libkern/murmur3_32.c standard libkern/memcchr.c standard libkern/memchr.c standard libkern/memmem.c optional gdb libkern/qsort.c standard libkern/qsort_r.c standard libkern/random.c standard libkern/scanc.c standard libkern/strcasecmp.c standard libkern/strcasestr.c standard libkern/strcat.c standard libkern/strchr.c standard libkern/strchrnul.c optional gdb libkern/strcmp.c standard libkern/strcpy.c standard libkern/strcspn.c standard libkern/strdup.c standard libkern/strndup.c standard libkern/strlcat.c standard libkern/strlcpy.c standard libkern/strncat.c standard libkern/strncmp.c standard libkern/strncpy.c standard libkern/strnlen.c standard libkern/strnstr.c standard libkern/strrchr.c standard libkern/strsep.c standard libkern/strspn.c standard libkern/strstr.c standard libkern/strtol.c standard libkern/strtoq.c standard libkern/strtoul.c standard libkern/strtouq.c standard libkern/strvalid.c standard libkern/timingsafe_bcmp.c standard contrib/zlib/adler32.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/compress.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ compile-with "${NORMAL_C} -Wno-cast-qual" contrib/zlib/crc32.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/deflate.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ compile-with "${NORMAL_C} -Wno-cast-qual" contrib/zlib/inffast.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/inflate.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/inftrees.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/trees.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib contrib/zlib/uncompr.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ compile-with "${NORMAL_C} -Wno-cast-qual" contrib/zlib/zutil.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib dev/zlib/zlib_mod.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib dev/zlib/zcalloc.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib net/altq/altq_cbq.c optional altq net/altq/altq_codel.c optional altq net/altq/altq_hfsc.c optional altq net/altq/altq_fairq.c optional altq net/altq/altq_priq.c optional altq net/altq/altq_red.c optional altq net/altq/altq_rio.c optional altq net/altq/altq_rmclass.c optional altq net/altq/altq_subr.c optional altq net/bpf.c standard net/bpf_buffer.c optional bpf net/bpf_jitter.c optional bpf_jitter net/bpf_filter.c optional bpf | netgraph_bpf net/bpf_zerocopy.c optional bpf net/bridgestp.c optional bridge | if_bridge net/ieee8023ad_lacp.c optional lagg net/if.c standard net/if_bridge.c optional bridge inet | if_bridge inet net/if_clone.c standard net/if_dead.c standard net/if_disc.c optional disc net/if_edsc.c optional edsc net/if_enc.c optional enc inet | enc inet6 net/if_epair.c optional epair net/if_ethersubr.c optional ether net/if_fwsubr.c optional fwip net/if_gif.c optional gif inet | gif inet6 | \ netgraph_gif inet | netgraph_gif inet6 net/if_gre.c optional gre inet | gre inet6 net/if_ipsec.c optional inet ipsec | inet6 ipsec net/if_lagg.c optional lagg net/if_loop.c optional loop net/if_llatbl.c standard net/if_me.c optional me inet net/if_media.c standard net/if_mib.c standard net/if_stf.c optional stf inet inet6 net/if_tuntap.c optional tuntap net/if_vlan.c optional vlan net/if_vxlan.c optional vxlan inet | vxlan inet6 net/ifdi_if.m optional ether pci iflib net/iflib.c optional ether pci iflib net/iflib_clone.c optional ether pci iflib net/mp_ring.c optional ether iflib net/mppcc.c optional netgraph_mppc_compression net/mppcd.c optional netgraph_mppc_compression net/netisr.c standard net/debugnet.c optional inet debugnet net/debugnet_inet.c optional inet debugnet net/pfil.c optional ether | inet net/radix.c standard net/raw_cb.c standard net/raw_usrreq.c standard net/route.c standard net/route/mpath_ctl.c optional route_mpath net/route/nhgrp.c optional route_mpath net/route/nhgrp_ctl.c optional route_mpath net/route/nhop.c standard net/route/nhop_ctl.c standard net/route/nhop_utils.c standard net/route/fib_algo.c optional fib_algo net/route/route_ctl.c standard net/route/route_ddb.c optional ddb net/route/route_helpers.c standard net/route/route_ifaddrs.c standard net/route/route_tables.c standard net/route/route_temporal.c standard net/rss_config.c optional inet rss | inet6 rss net/rtsock.c standard net/slcompress.c optional netgraph_vjc net/toeplitz.c optional inet rss | inet6 rss | route_mpath net/vnet.c optional vimage net80211/ieee80211.c optional wlan net80211/ieee80211_acl.c optional wlan wlan_acl net80211/ieee80211_action.c optional wlan net80211/ieee80211_adhoc.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ageq.c optional wlan net80211/ieee80211_amrr.c optional wlan | wlan_amrr net80211/ieee80211_crypto.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_crypto_ccmp.c optional wlan wlan_ccmp net80211/ieee80211_crypto_none.c optional wlan net80211/ieee80211_crypto_tkip.c optional wlan wlan_tkip net80211/ieee80211_crypto_wep.c optional wlan wlan_wep net80211/ieee80211_ddb.c optional wlan ddb net80211/ieee80211_dfs.c optional wlan net80211/ieee80211_freebsd.c optional wlan net80211/ieee80211_hostap.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ht.c optional wlan net80211/ieee80211_hwmp.c optional wlan ieee80211_support_mesh net80211/ieee80211_input.c optional wlan net80211/ieee80211_ioctl.c optional wlan net80211/ieee80211_mesh.c optional wlan ieee80211_support_mesh \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_monitor.c optional wlan net80211/ieee80211_node.c optional wlan net80211/ieee80211_output.c optional wlan net80211/ieee80211_phy.c optional wlan net80211/ieee80211_power.c optional wlan net80211/ieee80211_proto.c optional wlan net80211/ieee80211_radiotap.c optional wlan net80211/ieee80211_ratectl.c optional wlan net80211/ieee80211_ratectl_none.c optional wlan net80211/ieee80211_regdomain.c optional wlan net80211/ieee80211_rssadapt.c optional wlan wlan_rssadapt net80211/ieee80211_scan.c optional wlan net80211/ieee80211_scan_sta.c optional wlan net80211/ieee80211_sta.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_superg.c optional wlan ieee80211_support_superg net80211/ieee80211_scan_sw.c optional wlan net80211/ieee80211_tdma.c optional wlan ieee80211_support_tdma net80211/ieee80211_vht.c optional wlan net80211/ieee80211_wds.c optional wlan net80211/ieee80211_xauth.c optional wlan wlan_xauth net80211/ieee80211_alq.c optional wlan ieee80211_alq netgraph/atm/ccatm/ng_ccatm.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/ngatmbase.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscfu/ng_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscop/ng_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/uni/ng_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/bluetooth/common/ng_bluetooth.c optional netgraph_bluetooth netgraph/bluetooth/drivers/ubt/ng_ubt.c optional netgraph_bluetooth_ubt usb netgraph/bluetooth/drivers/ubt/ng_ubt_intel.c optional netgraph_bluetooth_ubt usb netgraph/bluetooth/drivers/ubtbcmfw/ubtbcmfw.c optional netgraph_bluetooth_ubtbcmfw usb netgraph/bluetooth/hci/ng_hci_cmds.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_evnt.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_main.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_misc.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_ulpi.c optional netgraph_bluetooth_hci netgraph/bluetooth/l2cap/ng_l2cap_cmds.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_evnt.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_llpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_main.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_misc.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_ulpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/socket/ng_btsocket.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_hci_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_rfcomm.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_sco.c optional netgraph_bluetooth_socket netgraph/netflow/netflow.c optional netgraph_netflow netgraph/netflow/netflow_v9.c optional netgraph_netflow netgraph/netflow/ng_netflow.c optional netgraph_netflow netgraph/ng_UI.c optional netgraph_UI netgraph/ng_async.c optional netgraph_async netgraph/ng_atmllc.c optional netgraph_atmllc netgraph/ng_base.c optional netgraph netgraph/ng_bpf.c optional netgraph_bpf netgraph/ng_bridge.c optional netgraph_bridge netgraph/ng_car.c optional netgraph_car netgraph/ng_checksum.c optional netgraph_checksum netgraph/ng_cisco.c optional netgraph_cisco netgraph/ng_deflate.c optional netgraph_deflate netgraph/ng_device.c optional netgraph_device netgraph/ng_echo.c optional netgraph_echo netgraph/ng_eiface.c optional netgraph_eiface netgraph/ng_ether.c optional netgraph_ether netgraph/ng_ether_echo.c optional netgraph_ether_echo netgraph/ng_frame_relay.c optional netgraph_frame_relay netgraph/ng_gif.c optional netgraph_gif inet6 | netgraph_gif inet netgraph/ng_gif_demux.c optional netgraph_gif_demux netgraph/ng_hole.c optional netgraph_hole netgraph/ng_iface.c optional netgraph_iface netgraph/ng_ip_input.c optional netgraph_ip_input netgraph/ng_ipfw.c optional netgraph_ipfw inet ipfirewall netgraph/ng_ksocket.c optional netgraph_ksocket netgraph/ng_l2tp.c optional netgraph_l2tp netgraph/ng_lmi.c optional netgraph_lmi netgraph/ng_macfilter.c optional netgraph_macfilter netgraph/ng_mppc.c optional netgraph_mppc_compression | \ netgraph_mppc_encryption netgraph/ng_nat.c optional netgraph_nat inet libalias netgraph/ng_one2many.c optional netgraph_one2many netgraph/ng_parse.c optional netgraph netgraph/ng_patch.c optional netgraph_patch netgraph/ng_pipe.c optional netgraph_pipe netgraph/ng_ppp.c optional netgraph_ppp netgraph/ng_pppoe.c optional netgraph_pppoe netgraph/ng_pptpgre.c optional netgraph_pptpgre netgraph/ng_pred1.c optional netgraph_pred1 netgraph/ng_rfc1490.c optional netgraph_rfc1490 netgraph/ng_socket.c optional netgraph_socket netgraph/ng_split.c optional netgraph_split netgraph/ng_tag.c optional netgraph_tag netgraph/ng_tcpmss.c optional netgraph_tcpmss netgraph/ng_tee.c optional netgraph_tee netgraph/ng_tty.c optional netgraph_tty netgraph/ng_vjc.c optional netgraph_vjc netgraph/ng_vlan.c optional netgraph_vlan netgraph/ng_vlan_rotate.c optional netgraph_vlan_rotate netinet/accf_data.c optional accept_filter_data inet netinet/accf_dns.c optional accept_filter_dns inet netinet/accf_http.c optional accept_filter_http inet netinet/if_ether.c optional inet ether netinet/igmp.c optional inet netinet/in.c optional inet netinet/in_cksum.c optional inet | inet6 netinet/in_debug.c optional inet ddb netinet/in_kdtrace.c optional inet | inet6 netinet/ip_carp.c optional inet carp | inet6 carp netinet/in_fib.c optional inet netinet/in_fib_algo.c optional inet fib_algo netinet/in_gif.c optional gif inet | netgraph_gif inet netinet/ip_gre.c optional gre inet netinet/ip_id.c optional inet netinet/in_jail.c optional inet netinet/in_mcast.c optional inet netinet/in_pcb.c optional inet | inet6 netinet/in_pcbgroup.c optional inet pcbgroup | inet6 pcbgroup netinet/in_prot.c optional inet | inet6 netinet/in_proto.c optional inet | inet6 netinet/in_rmx.c optional inet netinet/in_rss.c optional inet rss netinet/ip_divert.c optional inet ipdivert ipfirewall netinet/ip_ecn.c optional inet | inet6 netinet/ip_encap.c optional inet | inet6 netinet/ip_fastfwd.c optional inet netinet/ip_icmp.c optional inet | inet6 netinet/ip_input.c optional inet netinet/ip_mroute.c optional mrouting inet netinet/ip_options.c optional inet netinet/ip_output.c optional inet netinet/ip_reass.c optional inet netinet/raw_ip.c optional inet | inet6 netinet/cc/cc.c optional cc_newreno inet | cc_vegas inet | \ cc_htcp inet | cc_hd inet | cc_dctcp inet | cc_cubic inet | \ cc_chd inet | cc_cdg inet | cc_newreno inet6 | cc_vegas inet6 | \ cc_htcp inet6 | cc_hd inet6 |cc_dctcp inet6 | cc_cubic inet6 | \ cc_chd inet6 | cc_cdg inet6 netinet/cc/cc_cdg.c optional inet cc_cdg tcp_hhook netinet/cc/cc_chd.c optional inet cc_chd tcp_hhook netinet/cc/cc_cubic.c optional inet cc_cubic | inet6 cc_cubic netinet/cc/cc_dctcp.c optional inet cc_dctcp | inet6 cc_dctcp netinet/cc/cc_hd.c optional inet cc_hd tcp_hhook netinet/cc/cc_htcp.c optional inet cc_htcp | inet6 cc_htcp netinet/cc/cc_newreno.c optional inet cc_newreno | inet6 cc_newreno netinet/cc/cc_vegas.c optional inet cc_vegas tcp_hhook netinet/khelp/h_ertt.c optional inet tcp_hhook netinet/sctp_asconf.c optional inet sctp | inet6 sctp netinet/sctp_auth.c optional inet sctp | inet6 sctp netinet/sctp_bsd_addr.c optional inet sctp | inet6 sctp netinet/sctp_cc_functions.c optional inet sctp | inet6 sctp netinet/sctp_crc32.c optional inet | inet6 netinet/sctp_indata.c optional inet sctp | inet6 sctp netinet/sctp_input.c optional inet sctp | inet6 sctp netinet/sctp_kdtrace.c optional inet sctp | inet6 sctp netinet/sctp_output.c optional inet sctp | inet6 sctp netinet/sctp_pcb.c optional inet sctp | inet6 sctp netinet/sctp_peeloff.c optional inet sctp | inet6 sctp netinet/sctp_ss_functions.c optional inet sctp | inet6 sctp netinet/sctp_syscalls.c optional inet sctp | inet6 sctp netinet/sctp_sysctl.c optional inet sctp | inet6 sctp netinet/sctp_timer.c optional inet sctp | inet6 sctp netinet/sctp_usrreq.c optional inet sctp | inet6 sctp netinet/sctputil.c optional inet sctp | inet6 sctp netinet/siftr.c optional inet siftr alq | inet6 siftr alq netinet/tcp_debug.c optional tcpdebug netinet/tcp_fastopen.c optional inet tcp_rfc7413 | inet6 tcp_rfc7413 netinet/tcp_hostcache.c optional inet | inet6 netinet/tcp_input.c optional inet | inet6 netinet/tcp_log_buf.c optional tcp_blackbox inet | tcp_blackbox inet6 netinet/tcp_lro.c optional inet | inet6 netinet/tcp_output.c optional inet | inet6 netinet/tcp_offload.c optional tcp_offload inet | tcp_offload inet6 netinet/tcp_hpts.c optional tcphpts inet | tcphpts inet6 netinet/tcp_ratelimit.c optional ratelimit inet | ratelimit inet6 netinet/tcp_pcap.c optional inet tcppcap | inet6 tcppcap \ compile-with "${NORMAL_C} ${NO_WNONNULL}" netinet/tcp_reass.c optional inet | inet6 netinet/tcp_sack.c optional inet | inet6 netinet/tcp_stats.c optional stats inet | stats inet6 netinet/tcp_subr.c optional inet | inet6 netinet/tcp_syncache.c optional inet | inet6 netinet/tcp_timer.c optional inet | inet6 netinet/tcp_timewait.c optional inet | inet6 netinet/tcp_usrreq.c optional inet | inet6 netinet/udp_usrreq.c optional inet | inet6 netinet/libalias/alias.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_db.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_mod.c optional libalias | netgraph_nat netinet/libalias/alias_proxy.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_util.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_sctp.c optional libalias inet | netgraph_nat inet netinet/netdump/netdump_client.c optional inet debugnet netdump netinet6/dest6.c optional inet6 netinet6/frag6.c optional inet6 netinet6/icmp6.c optional inet6 netinet6/in6.c optional inet6 netinet6/in6_cksum.c optional inet6 netinet6/in6_fib.c optional inet6 netinet6/in6_fib_algo.c optional inet6 fib_algo netinet6/in6_gif.c optional gif inet6 | netgraph_gif inet6 netinet6/in6_ifattach.c optional inet6 netinet6/in6_jail.c optional inet6 netinet6/in6_mcast.c optional inet6 netinet6/in6_pcb.c optional inet6 netinet6/in6_pcbgroup.c optional inet6 pcbgroup netinet6/in6_proto.c optional inet6 netinet6/in6_rmx.c optional inet6 netinet6/in6_rss.c optional inet6 rss netinet6/in6_src.c optional inet6 netinet6/ip6_fastfwd.c optional inet6 netinet6/ip6_forward.c optional inet6 netinet6/ip6_gre.c optional gre inet6 netinet6/ip6_id.c optional inet6 netinet6/ip6_input.c optional inet6 netinet6/ip6_mroute.c optional mrouting inet6 netinet6/ip6_output.c optional inet6 netinet6/mld6.c optional inet6 netinet6/nd6.c optional inet6 netinet6/nd6_nbr.c optional inet6 netinet6/nd6_rtr.c optional inet6 netinet6/raw_ip6.c optional inet6 netinet6/route6.c optional inet6 netinet6/scope6.c optional inet6 netinet6/sctp6_usrreq.c optional inet6 sctp netinet6/udp6_usrreq.c optional inet6 netipsec/ipsec.c optional ipsec inet | ipsec inet6 netipsec/ipsec_input.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mbuf.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mod.c optional ipsec inet | ipsec inet6 netipsec/ipsec_output.c optional ipsec inet | ipsec inet6 netipsec/ipsec_pcb.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key_debug.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/keysock.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/subr_ipsec.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/udpencap.c optional ipsec inet netipsec/xform_ah.c optional ipsec inet | ipsec inet6 netipsec/xform_esp.c optional ipsec inet | ipsec inet6 netipsec/xform_ipcomp.c optional ipsec inet | ipsec inet6 netipsec/xform_tcp.c optional ipsec inet tcp_signature | \ ipsec inet6 tcp_signature | ipsec_support inet tcp_signature | \ ipsec_support inet6 tcp_signature netpfil/ipfw/dn_aqm_codel.c optional inet dummynet netpfil/ipfw/dn_aqm_pie.c optional inet dummynet netpfil/ipfw/dn_heap.c optional inet dummynet netpfil/ipfw/dn_sched_fifo.c optional inet dummynet netpfil/ipfw/dn_sched_fq_codel.c optional inet dummynet netpfil/ipfw/dn_sched_fq_pie.c optional inet dummynet netpfil/ipfw/dn_sched_prio.c optional inet dummynet netpfil/ipfw/dn_sched_qfq.c optional inet dummynet netpfil/ipfw/dn_sched_rr.c optional inet dummynet netpfil/ipfw/dn_sched_wf2q.c optional inet dummynet netpfil/ipfw/ip_dummynet.c optional inet dummynet netpfil/ipfw/ip_dn_io.c optional inet dummynet netpfil/ipfw/ip_dn_glue.c optional inet dummynet netpfil/ipfw/ip_fw2.c optional inet ipfirewall netpfil/ipfw/ip_fw_bpf.c optional inet ipfirewall netpfil/ipfw/ip_fw_dynamic.c optional inet ipfirewall \ compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/ip_fw_eaction.c optional inet ipfirewall netpfil/ipfw/ip_fw_log.c optional inet ipfirewall netpfil/ipfw/ip_fw_pfil.c optional inet ipfirewall netpfil/ipfw/ip_fw_sockopt.c optional inet ipfirewall netpfil/ipfw/ip_fw_table.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_algo.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_value.c optional inet ipfirewall netpfil/ipfw/ip_fw_iface.c optional inet ipfirewall netpfil/ipfw/ip_fw_nat.c optional inet ipfirewall_nat netpfil/ipfw/nat64/ip_fw_nat64.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64clat.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64clat_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64lsn.c optional inet inet6 ipfirewall \ ipfirewall_nat64 compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/nat64/nat64lsn_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/nat64/nat64stl.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64stl_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64_translate.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nptv6/ip_fw_nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/nptv6/nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/pmod/ip_fw_pmod.c optional inet ipfirewall_pmod netpfil/ipfw/pmod/tcpmod.c optional inet ipfirewall_pmod netpfil/pf/if_pflog.c optional pflog pf inet netpfil/pf/if_pfsync.c optional pfsync pf inet netpfil/pf/pf.c optional pf inet netpfil/pf/pf_if.c optional pf inet netpfil/pf/pf_ioctl.c optional pf inet netpfil/pf/pf_lb.c optional pf inet netpfil/pf/pf_norm.c optional pf inet netpfil/pf/pf_nv.c optional pf inet netpfil/pf/pf_osfp.c optional pf inet netpfil/pf/pf_ruleset.c optional pf inet netpfil/pf/pf_syncookies.c optional pf inet netpfil/pf/pf_table.c optional pf inet netpfil/pf/in4_cksum.c optional pf inet netsmb/smb_conn.c optional netsmb netsmb/smb_crypt.c optional netsmb netsmb/smb_dev.c optional netsmb netsmb/smb_iod.c optional netsmb netsmb/smb_rq.c optional netsmb netsmb/smb_smb.c optional netsmb netsmb/smb_subr.c optional netsmb netsmb/smb_trantcp.c optional netsmb netsmb/smb_usr.c optional netsmb nfs/bootp_subr.c optional bootp nfscl nfs/krpc_subr.c optional bootp nfscl nfs/nfs_diskless.c optional nfscl nfs_root nfs/nfs_nfssvc.c optional nfscl | nfslockd | nfsd nlm/nlm_advlock.c optional nfslockd | nfsd nlm/nlm_prot_clnt.c optional nfslockd | nfsd nlm/nlm_prot_impl.c optional nfslockd | nfsd nlm/nlm_prot_server.c optional nfslockd | nfsd nlm/nlm_prot_svc.c optional nfslockd | nfsd nlm/nlm_prot_xdr.c optional nfslockd | nfsd nlm/sm_inter_xdr.c optional nfslockd | nfsd # Linux Kernel Programming Interface compat/linuxkpi/common/src/linux_kmod.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_acpi.c optional compat_linuxkpi acpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_compat.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_current.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_devres.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_dmi.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_domain.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_firmware.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_fpu.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_hrtimer.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_interrupt.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_kthread.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_lock.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_page.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_pci.c optional compat_linuxkpi pci \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_tasklet.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_idr.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_radix.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_rcu.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C} -I$S/contrib/ck/include" compat/linuxkpi/common/src/linux_schedule.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_shmemfs.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_shrinker.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_slab.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_usb.c optional compat_linuxkpi usb \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_work.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_xarray.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_seq_file.c optional compat_linuxkpi | lindebugfs \ compile-with "${LINUXKPI_C}" compat/lindebugfs/lindebugfs.c optional lindebugfs \ compile-with "${LINUXKPI_C}" # OpenFabrics Enterprise Distribution (Infiniband) net/if_infiniband.c optional ofed | lagg ofed/drivers/infiniband/core/ib_addr.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_agent.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cache.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_core_uverbs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cq.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_device.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_fmr_pool.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwcm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_msg.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_util.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad_rmpp.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_multicast.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_packer.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_rdma_core.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_roce_gid_mgmt.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sa_query.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_smi.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sysfs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ud_header.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_umem.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_user_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_cmd.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_ioctl.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_main.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_marshall.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_async_fd.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_counters.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_cq.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_device.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_dm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_flow_action.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_std_types_mr.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_uapi.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_verbs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/ulp/ipoib/ipoib_cm.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_fs.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_ib.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_main.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_multicast.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_verbs.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_vlan.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/sdp/sdp_bcopy.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_main.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_rx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_cma.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_tx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" dev/mthca/mthca_allocator.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_av.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_catas.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cmd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_eq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mad.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_main.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mcg.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_memfree.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mr.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_pd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_profile.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_provider.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_qp.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_reset.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_srq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_uar.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_alias_GUID.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mcg.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_sysfs.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cm.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_ah.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_doorbell.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mad.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_main.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mr.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_qp.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_srq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_wc.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_alloc.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_catas.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cmd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_eq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw_qos.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_icm.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_intf.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_main.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mcg.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mr.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_pd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_port.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_profile.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_qp.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_reset.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_sense.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_srq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_resource_tracker.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_cq.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_main.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_netdev.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_port.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_resources.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_rx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_tx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_ah.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cong.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_devx.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_doorbell.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_gsi.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mad.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_main.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mem.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mr.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_qp.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_srq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_virt.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_alloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_diagnostics.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_eq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_eswitch.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_tree.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fw.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fwdump.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_health.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mad.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_main.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mcg.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mpfs.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mr.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pagealloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_port.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_qp.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_rl.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_srq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_tls.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_transobj.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_uar.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vport.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vsc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_wq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_lib/mlx5_gid.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_dim.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_ethtool.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_main.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_tx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_flow_table.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_hw_tls.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rl.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_txrx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_port_buffer.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" # crypto support opencrypto/cbc_mac.c optional crypto opencrypto/criov.c optional crypto | ipsec | ipsec_support opencrypto/crypto.c optional crypto | ipsec | ipsec_support opencrypto/cryptodev.c optional cryptodev opencrypto/cryptodev_if.m optional crypto | ipsec | ipsec_support opencrypto/cryptosoft.c optional crypto | ipsec | ipsec_support opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support opencrypto/gmac.c optional crypto | ipsec | ipsec_support opencrypto/gfmult.c optional crypto | ipsec | ipsec_support opencrypto/ktls_ocf.c optional kern_tls opencrypto/rmd160.c optional crypto | ipsec | ipsec_support opencrypto/xform.c optional crypto | ipsec | ipsec_support opencrypto/xform_cbc_mac.c optional crypto opencrypto/xform_chacha20_poly1305.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" opencrypto/xform_poly1305.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/onetimeauth_poly1305.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/donna/poly1305_donna.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_verify/sodium/verify.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" crypto/libsodium/randombytes.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" crypto/libsodium/utils.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_core/hchacha20/core_hchacha20.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_stream/chacha20/stream_chacha20.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_stream/chacha20/ref/chacha20_ref.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_aead/chacha20poly1305/sodium/aead_chacha20poly1305.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_aead/xchacha20poly1305/sodium/aead_xchacha20poly1305.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" rpc/auth_none.c optional krpc | nfslockd | nfscl | nfsd rpc/auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/authunix_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_bck.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_rc.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_vc.c optional krpc | nfslockd | nfscl | nfsd rpc/getnetconfig.c optional krpc | nfslockd | nfscl | nfsd rpc/replay.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_callmsg.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_clnt.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/svc.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_vc.c optional krpc | nfslockd | nfscl | nfsd # # Kernel RPC-over-TLS # rpctlscd.h optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlscd.x" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -hM $S/rpc/rpcsec_tls/rpctlscd.x | grep -v pthread.h > rpctlscd.h" \ no-obj no-implicit-rule before-depend local \ clean "rpctlscd.h" rpctlscd_xdr.c optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlscd.x rpctlscd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -c $S/rpc/rpcsec_tls/rpctlscd.x -o rpctlscd_xdr.c" no-ctfconvert \ no-implicit-rule before-depend local \ clean "rpctlscd_xdr.c" rpctlscd_clnt.c optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlscd.x rpctlscd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -lM $S/rpc/rpcsec_tls/rpctlscd.x | grep -v string.h > rpctlscd_clnt.c" no-ctfconvert \ no-implicit-rule before-depend local \ clean "rpctlscd_clnt.c" rpctlssd.h optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlssd.x" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -hM $S/rpc/rpcsec_tls/rpctlssd.x | grep -v pthread.h > rpctlssd.h" \ no-obj no-implicit-rule before-depend local \ clean "rpctlssd.h" rpctlssd_xdr.c optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlssd.x rpctlssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -c $S/rpc/rpcsec_tls/rpctlssd.x -o rpctlssd_xdr.c" no-ctfconvert \ no-implicit-rule before-depend local \ clean "rpctlssd_xdr.c" rpctlssd_clnt.c optional krpc | nfslockd | nfscl | nfsd \ dependency "$S/rpc/rpcsec_tls/rpctlssd.x rpctlssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -lM $S/rpc/rpcsec_tls/rpctlssd.x | grep -v string.h > rpctlssd_clnt.c" no-ctfconvert \ no-implicit-rule before-depend local \ clean "rpctlssd_clnt.c" rpc/rpcsec_tls/rpctls_impl.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcsec_tls/auth_tls.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcsec_gss/rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_conf.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_misc.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_prot.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/svc_rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi security/audit/audit.c optional audit security/audit/audit_arg.c optional audit security/audit/audit_bsm.c optional audit security/audit/audit_bsm_db.c optional audit security/audit/audit_bsm_klib.c optional audit security/audit/audit_dtrace.c optional dtaudit audit | dtraceall audit compile-with "${CDDL_C}" security/audit/audit_pipe.c optional audit security/audit/audit_syscalls.c standard security/audit/audit_trigger.c optional audit security/audit/audit_worker.c optional audit security/audit/bsm_domain.c optional audit security/audit/bsm_errno.c optional audit security/audit/bsm_fcntl.c optional audit security/audit/bsm_socket_type.c optional audit security/audit/bsm_token.c optional audit security/mac/mac_audit.c optional mac audit security/mac/mac_cred.c optional mac security/mac/mac_framework.c optional mac security/mac/mac_inet.c optional mac inet | mac inet6 security/mac/mac_inet6.c optional mac inet6 security/mac/mac_label.c optional mac security/mac/mac_net.c optional mac security/mac/mac_pipe.c optional mac security/mac/mac_posix_sem.c optional mac security/mac/mac_posix_shm.c optional mac security/mac/mac_priv.c optional mac security/mac/mac_process.c optional mac security/mac/mac_socket.c optional mac security/mac/mac_syscalls.c standard security/mac/mac_system.c optional mac security/mac/mac_sysv_msg.c optional mac security/mac/mac_sysv_sem.c optional mac security/mac/mac_sysv_shm.c optional mac security/mac/mac_vfs.c optional mac security/mac_biba/mac_biba.c optional mac_biba security/mac_bsdextended/mac_bsdextended.c optional mac_bsdextended security/mac_bsdextended/ugidfw_system.c optional mac_bsdextended security/mac_bsdextended/ugidfw_vnode.c optional mac_bsdextended security/mac_ifoff/mac_ifoff.c optional mac_ifoff security/mac_lomac/mac_lomac.c optional mac_lomac security/mac_mls/mac_mls.c optional mac_mls security/mac_none/mac_none.c optional mac_none security/mac_ntpd/mac_ntpd.c optional mac_ntpd security/mac_partition/mac_partition.c optional mac_partition security/mac_portacl/mac_portacl.c optional mac_portacl security/mac_seeotheruids/mac_seeotheruids.c optional mac_seeotheruids security/mac_stub/mac_stub.c optional mac_stub security/mac_test/mac_test.c optional mac_test security/mac_veriexec/mac_veriexec.c optional mac_veriexec security/mac_veriexec/veriexec_fingerprint.c optional mac_veriexec security/mac_veriexec/veriexec_metadata.c optional mac_veriexec security/mac_veriexec_parser/mac_veriexec_parser.c optional mac_veriexec mac_veriexec_parser security/mac_veriexec/mac_veriexec_rmd160.c optional mac_veriexec_rmd160 security/mac_veriexec/mac_veriexec_sha1.c optional mac_veriexec_sha1 security/mac_veriexec/mac_veriexec_sha256.c optional mac_veriexec_sha256 security/mac_veriexec/mac_veriexec_sha384.c optional mac_veriexec_sha384 security/mac_veriexec/mac_veriexec_sha512.c optional mac_veriexec_sha512 teken/teken.c optional sc !SC_NO_TERM_TEKEN | vt ufs/ffs/ffs_alloc.c optional ffs ufs/ffs/ffs_balloc.c optional ffs ufs/ffs/ffs_inode.c optional ffs ufs/ffs/ffs_snapshot.c optional ffs ufs/ffs/ffs_softdep.c optional ffs ufs/ffs/ffs_subr.c optional ffs | geom_label ufs/ffs/ffs_tables.c optional ffs | geom_label ufs/ffs/ffs_vfsops.c optional ffs ufs/ffs/ffs_vnops.c optional ffs ufs/ffs/ffs_rawread.c optional ffs directio ufs/ffs/ffs_suspend.c optional ffs ufs/ufs/ufs_acl.c optional ffs ufs/ufs/ufs_bmap.c optional ffs ufs/ufs/ufs_dirhash.c optional ffs ufs/ufs/ufs_extattr.c optional ffs ufs/ufs/ufs_gjournal.c optional ffs UFS_GJOURNAL ufs/ufs/ufs_inode.c optional ffs ufs/ufs/ufs_lookup.c optional ffs ufs/ufs/ufs_quota.c optional ffs ufs/ufs/ufs_vfsops.c optional ffs ufs/ufs/ufs_vnops.c optional ffs vm/default_pager.c standard vm/device_pager.c standard vm/phys_pager.c standard vm/redzone.c optional DEBUG_REDZONE vm/sg_pager.c standard vm/swap_pager.c standard vm/uma_core.c standard vm/uma_dbg.c standard vm/memguard.c optional DEBUG_MEMGUARD vm/vm_domainset.c standard vm/vm_fault.c standard vm/vm_glue.c standard vm/vm_init.c standard vm/vm_kern.c standard vm/vm_map.c standard vm/vm_meter.c standard vm/vm_mmap.c standard vm/vm_object.c standard vm/vm_page.c standard vm/vm_pageout.c standard vm/vm_pager.c standard vm/vm_phys.c standard vm/vm_radix.c standard vm/vm_reserv.c standard vm/vm_swapout.c optional !NO_SWAPPING vm/vm_swapout_dummy.c optional NO_SWAPPING vm/vm_unix.c standard vm/vnode_pager.c standard xen/features.c optional xenhvm xen/xenbus/xenbus_if.m optional xenhvm xen/xenbus/xenbus.c optional xenhvm xen/xenbus/xenbusb_if.m optional xenhvm xen/xenbus/xenbusb.c optional xenhvm xen/xenbus/xenbusb_front.c optional xenhvm xen/xenbus/xenbusb_back.c optional xenhvm xen/xenmem/xenmem_if.m optional xenhvm xdr/xdr.c optional xdr | krpc | nfslockd | nfscl | nfsd xdr/xdr_array.c optional xdr | krpc | nfslockd | nfscl | nfsd xdr/xdr_mbuf.c optional xdr | krpc | nfslockd | nfscl | nfsd xdr/xdr_mem.c optional xdr | krpc | nfslockd | nfscl | nfsd xdr/xdr_reference.c optional xdr | krpc | nfslockd | nfscl | nfsd xdr/xdr_sizeof.c optional xdr | krpc | nfslockd | nfscl | nfsd diff --git a/sys/dev/amr/amr.c b/sys/dev/amr/amr.c deleted file mode 100644 index 1c4f252345e9..000000000000 --- a/sys/dev/amr/amr.c +++ /dev/null @@ -1,2446 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 1999,2000 Michael Smith - * Copyright (c) 2000 BSDi - * Copyright (c) 2005 Scott Long - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/*- - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002, 2004 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -/* - * Driver for the AMI MegaRaid family of controllers. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#define AMR_DEFINE_TABLES -#include - -SYSCTL_NODE(_hw, OID_AUTO, amr, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, - "AMR driver parameters"); - -static d_open_t amr_open; -static d_close_t amr_close; -static d_ioctl_t amr_ioctl; - -static struct cdevsw amr_cdevsw = { - .d_version = D_VERSION, - .d_flags = D_NEEDGIANT, - .d_open = amr_open, - .d_close = amr_close, - .d_ioctl = amr_ioctl, - .d_name = "amr", -}; - -int linux_no_adapter = 0; -/* - * Initialisation, bus interface. - */ -static void amr_startup(void *arg); - -/* - * Command wrappers - */ -static int amr_query_controller(struct amr_softc *sc); -static void *amr_enquiry(struct amr_softc *sc, size_t bufsize, - u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual, int *status); -static void amr_completeio(struct amr_command *ac); -static int amr_support_ext_cdb(struct amr_softc *sc); - -/* - * Command buffer allocation. - */ -static void amr_alloccmd_cluster(struct amr_softc *sc); -static void amr_freecmd_cluster(struct amr_command_cluster *acc); - -/* - * Command processing. - */ -static int amr_bio_command(struct amr_softc *sc, struct amr_command **acp); -static int amr_wait_command(struct amr_command *ac) __unused; -static int amr_mapcmd(struct amr_command *ac); -static void amr_unmapcmd(struct amr_command *ac); -static int amr_start(struct amr_command *ac); -static void amr_complete(void *context, ac_qhead_t *head); -static void amr_setup_sg(void *arg, bus_dma_segment_t *segs, int nsegments, int error); -static void amr_setup_data(void *arg, bus_dma_segment_t *segs, int nsegments, int error); -static void amr_setup_ccb(void *arg, bus_dma_segment_t *segs, int nsegments, int error); -static void amr_abort_load(struct amr_command *ac); - -/* - * Interface-specific shims - */ -static int amr_quartz_submit_command(struct amr_command *ac); -static int amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave); -static int amr_quartz_poll_command(struct amr_command *ac); -static int amr_quartz_poll_command1(struct amr_softc *sc, struct amr_command *ac); - -static int amr_std_submit_command(struct amr_command *ac); -static int amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave); -static int amr_std_poll_command(struct amr_command *ac); -static void amr_std_attach_mailbox(struct amr_softc *sc); - -#ifdef AMR_BOARD_INIT -static int amr_quartz_init(struct amr_softc *sc); -static int amr_std_init(struct amr_softc *sc); -#endif - -/* - * Debugging - */ -static void amr_describe_controller(struct amr_softc *sc); -#ifdef AMR_DEBUG -#if 0 -static void amr_printcommand(struct amr_command *ac); -#endif -#endif - -static void amr_init_sysctl(struct amr_softc *sc); -static int amr_linux_ioctl_int(struct cdev *dev, u_long cmd, caddr_t addr, - int32_t flag, struct thread *td); - -static MALLOC_DEFINE(M_AMR, "amr", "AMR memory"); - -/******************************************************************************** - ******************************************************************************** - Inline Glue - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - ******************************************************************************** - Public Interfaces - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Initialise the controller and softc. - */ -int -amr_attach(struct amr_softc *sc) -{ - device_t child; - - debug_called(1); - - /* - * Initialise per-controller queues. - */ - amr_init_qhead(&sc->amr_freecmds); - amr_init_qhead(&sc->amr_ready); - TAILQ_INIT(&sc->amr_cmd_clusters); - bioq_init(&sc->amr_bioq); - - debug(2, "queue init done"); - - /* - * Configure for this controller type. - */ - if (AMR_IS_QUARTZ(sc)) { - sc->amr_submit_command = amr_quartz_submit_command; - sc->amr_get_work = amr_quartz_get_work; - sc->amr_poll_command = amr_quartz_poll_command; - sc->amr_poll_command1 = amr_quartz_poll_command1; - } else { - sc->amr_submit_command = amr_std_submit_command; - sc->amr_get_work = amr_std_get_work; - sc->amr_poll_command = amr_std_poll_command; - amr_std_attach_mailbox(sc); - } - -#ifdef AMR_BOARD_INIT - if ((AMR_IS_QUARTZ(sc) ? amr_quartz_init(sc) : amr_std_init(sc))) - return(ENXIO); -#endif - - /* - * Allocate initial commands. - */ - amr_alloccmd_cluster(sc); - - /* - * Quiz controller for features and limits. - */ - if (amr_query_controller(sc)) - return(ENXIO); - - debug(2, "controller query complete"); - - /* - * preallocate the remaining commands. - */ - while (sc->amr_nextslot < sc->amr_maxio) - amr_alloccmd_cluster(sc); - - /* - * Setup sysctls. - */ - amr_init_sysctl(sc); - - /* - * Attach our 'real' SCSI channels to CAM. - */ - child = device_add_child(sc->amr_dev, "amrp", -1); - sc->amr_pass = child; - if (child != NULL) { - device_set_softc(child, sc); - device_set_desc(child, "SCSI Passthrough Bus"); - bus_generic_attach(sc->amr_dev); - } - - /* - * Create the control device. - */ - sc->amr_dev_t = make_dev(&amr_cdevsw, device_get_unit(sc->amr_dev), UID_ROOT, GID_OPERATOR, - S_IRUSR | S_IWUSR, "amr%d", device_get_unit(sc->amr_dev)); - sc->amr_dev_t->si_drv1 = sc; - linux_no_adapter++; - if (device_get_unit(sc->amr_dev) == 0) - make_dev_alias(sc->amr_dev_t, "megadev0"); - - /* - * Schedule ourselves to bring the controller up once interrupts are - * available. - */ - bzero(&sc->amr_ich, sizeof(struct intr_config_hook)); - sc->amr_ich.ich_func = amr_startup; - sc->amr_ich.ich_arg = sc; - if (config_intrhook_establish(&sc->amr_ich) != 0) { - device_printf(sc->amr_dev, "can't establish configuration hook\n"); - return(ENOMEM); - } - - /* - * Print a little information about the controller. - */ - amr_describe_controller(sc); - - debug(2, "attach complete"); - return(0); -} - -/******************************************************************************** - * Locate disk resources and attach children to them. - */ -static void -amr_startup(void *arg) -{ - struct amr_softc *sc = (struct amr_softc *)arg; - struct amr_logdrive *dr; - int i, error; - - debug_called(1); - - /* get up-to-date drive information */ - if (amr_query_controller(sc)) { - device_printf(sc->amr_dev, "can't scan controller for drives\n"); - return; - } - - /* iterate over available drives */ - for (i = 0, dr = &sc->amr_drive[0]; (i < AMR_MAXLD) && (dr->al_size != 0xffffffff); i++, dr++) { - /* are we already attached to this drive? */ - if (dr->al_disk == 0) { - /* generate geometry information */ - if (dr->al_size > 0x200000) { /* extended translation? */ - dr->al_heads = 255; - dr->al_sectors = 63; - } else { - dr->al_heads = 64; - dr->al_sectors = 32; - } - dr->al_cylinders = dr->al_size / (dr->al_heads * dr->al_sectors); - - dr->al_disk = device_add_child(sc->amr_dev, NULL, -1); - if (dr->al_disk == 0) - device_printf(sc->amr_dev, "device_add_child failed\n"); - device_set_ivars(dr->al_disk, dr); - } - } - - if ((error = bus_generic_attach(sc->amr_dev)) != 0) - device_printf(sc->amr_dev, "bus_generic_attach returned %d\n", error); - - /* mark controller back up */ - sc->amr_state &= ~AMR_STATE_SHUTDOWN; - - /* interrupts will be enabled before we do anything more */ - sc->amr_state |= AMR_STATE_INTEN; - - /* pull ourselves off the intrhook chain */ - if (sc->amr_ich.ich_func) - config_intrhook_disestablish(&sc->amr_ich); - sc->amr_ich.ich_func = NULL; - - return; -} - -static void -amr_init_sysctl(struct amr_softc *sc) -{ - - SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->amr_dev), - SYSCTL_CHILDREN(device_get_sysctl_tree(sc->amr_dev)), - OID_AUTO, "allow_volume_configure", CTLFLAG_RW, &sc->amr_allow_vol_config, 0, - ""); - SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->amr_dev), - SYSCTL_CHILDREN(device_get_sysctl_tree(sc->amr_dev)), - OID_AUTO, "nextslot", CTLFLAG_RD, &sc->amr_nextslot, 0, - ""); - SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->amr_dev), - SYSCTL_CHILDREN(device_get_sysctl_tree(sc->amr_dev)), - OID_AUTO, "busyslots", CTLFLAG_RD, &sc->amr_busyslots, 0, - ""); - SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->amr_dev), - SYSCTL_CHILDREN(device_get_sysctl_tree(sc->amr_dev)), - OID_AUTO, "maxio", CTLFLAG_RD, &sc->amr_maxio, 0, - ""); -} - -/******************************************************************************* - * Free resources associated with a controller instance - */ -void -amr_free(struct amr_softc *sc) -{ - struct amr_command_cluster *acc; - - /* detach from CAM */ - if (sc->amr_pass != NULL) - device_delete_child(sc->amr_dev, sc->amr_pass); - - /* throw away any command buffers */ - while ((acc = TAILQ_FIRST(&sc->amr_cmd_clusters)) != NULL) { - TAILQ_REMOVE(&sc->amr_cmd_clusters, acc, acc_link); - amr_freecmd_cluster(acc); - } - - /* destroy control device */ - if( sc->amr_dev_t != (struct cdev *)NULL) - destroy_dev(sc->amr_dev_t); - - if (mtx_initialized(&sc->amr_hw_lock)) - mtx_destroy(&sc->amr_hw_lock); - - if (mtx_initialized(&sc->amr_list_lock)) - mtx_destroy(&sc->amr_list_lock); -} - -/******************************************************************************* - * Receive a bio structure from a child device and queue it on a particular - * disk resource, then poke the disk resource to start as much work as it can. - */ -int -amr_submit_bio(struct amr_softc *sc, struct bio *bio) -{ - debug_called(2); - - mtx_lock(&sc->amr_list_lock); - amr_enqueue_bio(sc, bio); - amr_startio(sc); - mtx_unlock(&sc->amr_list_lock); - return(0); -} - -/******************************************************************************** - * Accept an open operation on the control device. - */ -static int -amr_open(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - int unit = dev2unit(dev); - struct amr_softc *sc = devclass_get_softc(devclass_find("amr"), unit); - - debug_called(1); - - sc->amr_state |= AMR_STATE_OPEN; - return(0); -} - -#ifdef LSI -static int -amr_del_ld(struct amr_softc *sc, int drv_no, int status) -{ - - debug_called(1); - - sc->amr_state &= ~AMR_STATE_QUEUE_FRZN; - sc->amr_state &= ~AMR_STATE_LD_DELETE; - sc->amr_state |= AMR_STATE_REMAP_LD; - debug(1, "State Set"); - - if (!status) { - debug(1, "disk begin destroyed %d",drv_no); - if (--amr_disks_registered == 0) - cdevsw_remove(&amrddisk_cdevsw); - debug(1, "disk begin destroyed success"); - } - return 0; -} - -static int -amr_prepare_ld_delete(struct amr_softc *sc) -{ - - debug_called(1); - if (sc->ld_del_supported == 0) - return(ENOIOCTL); - - sc->amr_state |= AMR_STATE_QUEUE_FRZN; - sc->amr_state |= AMR_STATE_LD_DELETE; - - /* 5 minutes for the all the commands to be flushed.*/ - tsleep((void *)&sc->ld_del_supported, PCATCH | PRIBIO,"delete_logical_drv",hz * 60 * 1); - if ( sc->amr_busyslots ) - return(ENOIOCTL); - - return 0; -} -#endif - -/******************************************************************************** - * Accept the last close on the control device. - */ -static int -amr_close(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - int unit = dev2unit(dev); - struct amr_softc *sc = devclass_get_softc(devclass_find("amr"), unit); - - debug_called(1); - - sc->amr_state &= ~AMR_STATE_OPEN; - return (0); -} - -/******************************************************************************** - * Handle controller-specific control operations. - */ -static void -amr_rescan_drives(struct cdev *dev) -{ - struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; - int i, error = 0; - - sc->amr_state |= AMR_STATE_REMAP_LD; - while (sc->amr_busyslots) { - device_printf(sc->amr_dev, "idle controller\n"); - amr_done(sc); - } - - /* mark ourselves as in-shutdown */ - sc->amr_state |= AMR_STATE_SHUTDOWN; - - /* flush controller */ - device_printf(sc->amr_dev, "flushing cache..."); - printf("%s\n", amr_flush(sc) ? "failed" : "done"); - - /* delete all our child devices */ - for(i = 0 ; i < AMR_MAXLD; i++) { - if(sc->amr_drive[i].al_disk != 0) { - if((error = device_delete_child(sc->amr_dev, - sc->amr_drive[i].al_disk)) != 0) - goto shutdown_out; - - sc->amr_drive[i].al_disk = 0; - } - } - -shutdown_out: - amr_startup(sc); -} - -/* - * Bug-for-bug compatibility with Linux! - * Some apps will send commands with inlen and outlen set to 0, - * even though they expect data to be transferred to them from the - * card. Linux accidentally allows this by allocating a 4KB - * buffer for the transfer anyways, but it then throws it away - * without copying it back to the app. - * - * The amr(4) firmware relies on this feature. In fact, it assumes - * the buffer is always a power of 2 up to a max of 64k. There is - * also at least one case where it assumes a buffer less than 16k is - * greater than 16k. However, forcing all buffers to a size of 32k - * causes stalls in the firmware. Force each command smaller than - * 64k up to the next power of two except that commands between 8k - * and 16k are rounded up to 32k instead of 16k. - */ -static unsigned long -amr_ioctl_buffer_length(unsigned long len) -{ - - if (len <= 4 * 1024) - return (4 * 1024); - if (len <= 8 * 1024) - return (8 * 1024); - if (len <= 32 * 1024) - return (32 * 1024); - if (len <= 64 * 1024) - return (64 * 1024); - return (len); -} - -int -amr_linux_ioctl_int(struct cdev *dev, u_long cmd, caddr_t addr, int32_t flag, - struct thread *td) -{ - struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; - struct amr_command *ac; - struct amr_mailbox *mb; - struct amr_linux_ioctl ali; - void *dp, *temp; - int error; - int len, ac_flags = 0; - int logical_drives_changed = 0; - u_int32_t linux_version = 0x02100000; - u_int8_t status; - struct amr_passthrough *ap; /* 60 bytes */ - - error = 0; - dp = NULL; - ac = NULL; - ap = NULL; - - if ((error = copyin(addr, &ali, sizeof(ali))) != 0) - return (error); - switch (ali.ui.fcs.opcode) { - case 0x82: - switch(ali.ui.fcs.subopcode) { - case 'e': - copyout(&linux_version, (void *)(uintptr_t)ali.data, - sizeof(linux_version)); - error = 0; - break; - - case 'm': - copyout(&linux_no_adapter, (void *)(uintptr_t)ali.data, - sizeof(linux_no_adapter)); - td->td_retval[0] = linux_no_adapter; - error = 0; - break; - - default: - printf("Unknown subopcode\n"); - error = ENOIOCTL; - break; - } - break; - - case 0x80: - case 0x81: - if (ali.ui.fcs.opcode == 0x80) - len = max(ali.outlen, ali.inlen); - else - len = ali.ui.fcs.length; - - mb = (void *)&ali.mbox[0]; - - if ((ali.mbox[0] == FC_DEL_LOGDRV && ali.mbox[2] == OP_DEL_LOGDRV) || /* delete */ - (ali.mbox[0] == AMR_CMD_CONFIG && ali.mbox[2] == 0x0d)) { /* create */ - if (sc->amr_allow_vol_config == 0) { - error = EPERM; - break; - } - logical_drives_changed = 1; - } - - if (ali.mbox[0] == AMR_CMD_PASS) { - mtx_lock(&sc->amr_list_lock); - while ((ac = amr_alloccmd(sc)) == NULL) - msleep(sc, &sc->amr_list_lock, PPAUSE, "amrioc", hz); - mtx_unlock(&sc->amr_list_lock); - ap = &ac->ac_ccb->ccb_pthru; - - error = copyin((void *)(uintptr_t)mb->mb_physaddr, ap, - sizeof(struct amr_passthrough)); - if (error) - break; - - if (ap->ap_data_transfer_length) - dp = malloc(ap->ap_data_transfer_length, M_AMR, - M_WAITOK | M_ZERO); - - if (ali.inlen) { - error = copyin((void *)(uintptr_t)ap->ap_data_transfer_address, - dp, ap->ap_data_transfer_length); - if (error) - break; - } - - ac_flags = AMR_CMD_DATAIN|AMR_CMD_DATAOUT|AMR_CMD_CCB; - bzero(&ac->ac_mailbox, sizeof(ac->ac_mailbox)); - ac->ac_mailbox.mb_command = AMR_CMD_PASS; - ac->ac_flags = ac_flags; - - ac->ac_data = dp; - ac->ac_length = ap->ap_data_transfer_length; - temp = (void *)(uintptr_t)ap->ap_data_transfer_address; - - mtx_lock(&sc->amr_list_lock); - error = amr_wait_command(ac); - mtx_unlock(&sc->amr_list_lock); - if (error) - break; - - status = ac->ac_status; - error = copyout(&status, &((struct amr_passthrough *)(uintptr_t)mb->mb_physaddr)->ap_scsi_status, sizeof(status)); - if (error) - break; - - if (ali.outlen) { - error = copyout(dp, temp, ap->ap_data_transfer_length); - if (error) - break; - } - error = copyout(ap->ap_request_sense_area, ((struct amr_passthrough *)(uintptr_t)mb->mb_physaddr)->ap_request_sense_area, ap->ap_request_sense_length); - if (error) - break; - - error = 0; - break; - } else if (ali.mbox[0] == AMR_CMD_PASS_64) { - printf("No AMR_CMD_PASS_64\n"); - error = ENOIOCTL; - break; - } else if (ali.mbox[0] == AMR_CMD_EXTPASS) { - printf("No AMR_CMD_EXTPASS\n"); - error = ENOIOCTL; - break; - } else { - len = amr_ioctl_buffer_length(imax(ali.inlen, ali.outlen)); - - dp = malloc(len, M_AMR, M_WAITOK | M_ZERO); - - if (ali.inlen) { - error = copyin((void *)(uintptr_t)mb->mb_physaddr, dp, len); - if (error) - break; - } - - mtx_lock(&sc->amr_list_lock); - while ((ac = amr_alloccmd(sc)) == NULL) - msleep(sc, &sc->amr_list_lock, PPAUSE, "amrioc", hz); - - ac_flags = AMR_CMD_DATAIN|AMR_CMD_DATAOUT; - bzero(&ac->ac_mailbox, sizeof(ac->ac_mailbox)); - bcopy(&ali.mbox[0], &ac->ac_mailbox, sizeof(ali.mbox)); - - ac->ac_length = len; - ac->ac_data = dp; - ac->ac_flags = ac_flags; - - error = amr_wait_command(ac); - mtx_unlock(&sc->amr_list_lock); - if (error) - break; - - status = ac->ac_status; - error = copyout(&status, &((struct amr_mailbox *)&((struct amr_linux_ioctl *)addr)->mbox[0])->mb_status, sizeof(status)); - if (ali.outlen) { - error = copyout(dp, (void *)(uintptr_t)mb->mb_physaddr, ali.outlen); - if (error) - break; - } - - error = 0; - if (logical_drives_changed) - amr_rescan_drives(dev); - break; - } - break; - - default: - debug(1, "unknown linux ioctl 0x%lx", cmd); - printf("unknown linux ioctl 0x%lx\n", cmd); - error = ENOIOCTL; - break; - } - - /* - * At this point, we know that there is a lock held and that these - * objects have been allocated. - */ - mtx_lock(&sc->amr_list_lock); - if (ac != NULL) - amr_releasecmd(ac); - mtx_unlock(&sc->amr_list_lock); - if (dp != NULL) - free(dp, M_AMR); - return(error); -} - -static int -amr_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int32_t flag, struct thread *td) -{ - struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; - union { - void *_p; - struct amr_user_ioctl *au; -#ifdef AMR_IO_COMMAND32 - struct amr_user_ioctl32 *au32; -#endif - int *result; - } arg; - struct amr_command *ac; - struct amr_mailbox_ioctl *mbi; - void *dp, *au_buffer; - unsigned long au_length, real_length; - unsigned char *au_cmd; - int *au_statusp; - int error; - struct amr_passthrough *ap; /* 60 bytes */ - int logical_drives_changed = 0; - - debug_called(1); - - arg._p = (void *)addr; - - error = 0; - dp = NULL; - ac = NULL; - ap = NULL; - - switch(cmd) { - case AMR_IO_VERSION: - debug(1, "AMR_IO_VERSION"); - *arg.result = AMR_IO_VERSION_NUMBER; - return(0); - -#ifdef AMR_IO_COMMAND32 - /* - * Accept ioctl-s from 32-bit binaries on non-32-bit - * platforms, such as AMD. LSI's MEGAMGR utility is - * the only example known today... -mi - */ - case AMR_IO_COMMAND32: - debug(1, "AMR_IO_COMMAND32 0x%x", arg.au32->au_cmd[0]); - au_cmd = arg.au32->au_cmd; - au_buffer = (void *)(u_int64_t)arg.au32->au_buffer; - au_length = arg.au32->au_length; - au_statusp = &arg.au32->au_status; - break; -#endif - - case AMR_IO_COMMAND: - debug(1, "AMR_IO_COMMAND 0x%x", arg.au->au_cmd[0]); - au_cmd = arg.au->au_cmd; - au_buffer = (void *)arg.au->au_buffer; - au_length = arg.au->au_length; - au_statusp = &arg.au->au_status; - break; - - case 0xc0046d00: - case 0xc06e6d00: /* Linux emulation */ - { - devclass_t devclass; - struct amr_linux_ioctl ali; - int adapter, error; - - devclass = devclass_find("amr"); - if (devclass == NULL) - return (ENOENT); - - error = copyin(addr, &ali, sizeof(ali)); - if (error) - return (error); - if (ali.ui.fcs.opcode == 0x82) - adapter = 0; - else - adapter = (ali.ui.fcs.adapno) ^ 'm' << 8; - - sc = devclass_get_softc(devclass, adapter); - if (sc == NULL) - return (ENOENT); - - return (amr_linux_ioctl_int(sc->amr_dev_t, cmd, addr, 0, td)); - } - default: - debug(1, "unknown ioctl 0x%lx", cmd); - return(ENOIOCTL); - } - - if ((au_cmd[0] == FC_DEL_LOGDRV && au_cmd[1] == OP_DEL_LOGDRV) || /* delete */ - (au_cmd[0] == AMR_CMD_CONFIG && au_cmd[1] == 0x0d)) { /* create */ - if (sc->amr_allow_vol_config == 0) { - error = EPERM; - goto out; - } - logical_drives_changed = 1; -#ifdef LSI - if ((error = amr_prepare_ld_delete(sc)) != 0) - return (error); -#endif - } - - /* handle inbound data buffer */ - real_length = amr_ioctl_buffer_length(au_length); - dp = malloc(real_length, M_AMR, M_WAITOK|M_ZERO); - if (au_length != 0 && au_cmd[0] != 0x06) { - if ((error = copyin(au_buffer, dp, au_length)) != 0) { - free(dp, M_AMR); - return (error); - } - debug(2, "copyin %ld bytes from %p -> %p", au_length, au_buffer, dp); - } - - /* Allocate this now before the mutex gets held */ - - mtx_lock(&sc->amr_list_lock); - while ((ac = amr_alloccmd(sc)) == NULL) - msleep(sc, &sc->amr_list_lock, PPAUSE, "amrioc", hz); - - /* handle SCSI passthrough command */ - if (au_cmd[0] == AMR_CMD_PASS) { - int len; - - ap = &ac->ac_ccb->ccb_pthru; - bzero(ap, sizeof(struct amr_passthrough)); - - /* copy cdb */ - len = au_cmd[2]; - ap->ap_cdb_length = len; - bcopy(au_cmd + 3, ap->ap_cdb, len); - - /* build passthrough */ - ap->ap_timeout = au_cmd[len + 3] & 0x07; - ap->ap_ars = (au_cmd[len + 3] & 0x08) ? 1 : 0; - ap->ap_islogical = (au_cmd[len + 3] & 0x80) ? 1 : 0; - ap->ap_logical_drive_no = au_cmd[len + 4]; - ap->ap_channel = au_cmd[len + 5]; - ap->ap_scsi_id = au_cmd[len + 6]; - ap->ap_request_sense_length = 14; - ap->ap_data_transfer_length = au_length; - /* XXX what about the request-sense area? does the caller want it? */ - - /* build command */ - ac->ac_mailbox.mb_command = AMR_CMD_PASS; - ac->ac_flags = AMR_CMD_CCB; - - } else { - /* direct command to controller */ - mbi = (struct amr_mailbox_ioctl *)&ac->ac_mailbox; - - /* copy pertinent mailbox items */ - mbi->mb_command = au_cmd[0]; - mbi->mb_channel = au_cmd[1]; - mbi->mb_param = au_cmd[2]; - mbi->mb_pad[0] = au_cmd[3]; - mbi->mb_drive = au_cmd[4]; - ac->ac_flags = 0; - } - - /* build the command */ - ac->ac_data = dp; - ac->ac_length = real_length; - ac->ac_flags |= AMR_CMD_DATAIN|AMR_CMD_DATAOUT; - - /* run the command */ - error = amr_wait_command(ac); - mtx_unlock(&sc->amr_list_lock); - if (error) - goto out; - - /* copy out data and set status */ - if (au_length != 0) { - error = copyout(dp, au_buffer, au_length); - } - debug(2, "copyout %ld bytes from %p -> %p", au_length, dp, au_buffer); - debug(2, "%p status 0x%x", dp, ac->ac_status); - *au_statusp = ac->ac_status; - -out: - /* - * At this point, we know that there is a lock held and that these - * objects have been allocated. - */ - mtx_lock(&sc->amr_list_lock); - if (ac != NULL) - amr_releasecmd(ac); - mtx_unlock(&sc->amr_list_lock); - if (dp != NULL) - free(dp, M_AMR); - -#ifndef LSI - if (logical_drives_changed) - amr_rescan_drives(dev); -#endif - - return(error); -} - -/******************************************************************************** - ******************************************************************************** - Command Wrappers - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Interrogate the controller for the operational parameters we require. - */ -static int -amr_query_controller(struct amr_softc *sc) -{ - struct amr_enquiry3 *aex; - struct amr_prodinfo *ap; - struct amr_enquiry *ae; - int ldrv; - int status; - - /* - * Greater than 10 byte cdb support - */ - sc->support_ext_cdb = amr_support_ext_cdb(sc); - - if(sc->support_ext_cdb) { - debug(2,"supports extended CDBs."); - } - - /* - * Try to issue an ENQUIRY3 command - */ - if ((aex = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_ENQ3, - AMR_CONFIG_ENQ3_SOLICITED_FULL, &status)) != NULL) { - /* - * Fetch current state of logical drives. - */ - for (ldrv = 0; ldrv < aex->ae_numldrives; ldrv++) { - sc->amr_drive[ldrv].al_size = aex->ae_drivesize[ldrv]; - sc->amr_drive[ldrv].al_state = aex->ae_drivestate[ldrv]; - sc->amr_drive[ldrv].al_properties = aex->ae_driveprop[ldrv]; - debug(2, " drive %d: %d state %x properties %x\n", ldrv, sc->amr_drive[ldrv].al_size, - sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties); - } - free(aex, M_AMR); - - /* - * Get product info for channel count. - */ - if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0, &status)) == NULL) { - device_printf(sc->amr_dev, "can't obtain product data from controller\n"); - return(1); - } - sc->amr_maxdrives = 40; - sc->amr_maxchan = ap->ap_nschan; - sc->amr_maxio = ap->ap_maxio; - sc->amr_type |= AMR_TYPE_40LD; - free(ap, M_AMR); - - ap = amr_enquiry(sc, 0, FC_DEL_LOGDRV, OP_SUP_DEL_LOGDRV, 0, &status); - if (ap != NULL) - free(ap, M_AMR); - if (!status) { - sc->amr_ld_del_supported = 1; - device_printf(sc->amr_dev, "delete logical drives supported by controller\n"); - } - } else { - /* failed, try the 8LD ENQUIRY commands */ - if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0, &status)) == NULL) { - if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0, &status)) == NULL) { - device_printf(sc->amr_dev, "can't obtain configuration data from controller\n"); - return(1); - } - ae->ae_signature = 0; - } - - /* - * Fetch current state of logical drives. - */ - for (ldrv = 0; ldrv < ae->ae_ldrv.al_numdrives; ldrv++) { - sc->amr_drive[ldrv].al_size = ae->ae_ldrv.al_size[ldrv]; - sc->amr_drive[ldrv].al_state = ae->ae_ldrv.al_state[ldrv]; - sc->amr_drive[ldrv].al_properties = ae->ae_ldrv.al_properties[ldrv]; - debug(2, " drive %d: %d state %x properties %x\n", ldrv, sc->amr_drive[ldrv].al_size, - sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties); - } - - sc->amr_maxdrives = 8; - sc->amr_maxchan = ae->ae_adapter.aa_channels; - sc->amr_maxio = ae->ae_adapter.aa_maxio; - free(ae, M_AMR); - } - - /* - * Mark remaining drives as unused. - */ - for (; ldrv < AMR_MAXLD; ldrv++) - sc->amr_drive[ldrv].al_size = 0xffffffff; - - /* - * Cap the maximum number of outstanding I/Os. AMI's Linux driver doesn't trust - * the controller's reported value, and lockups have been seen when we do. - */ - sc->amr_maxio = imin(sc->amr_maxio, AMR_LIMITCMD); - - return(0); -} - -/******************************************************************************** - * Run a generic enquiry-style command. - */ -static void * -amr_enquiry(struct amr_softc *sc, size_t bufsize, u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual, int *status) -{ - struct amr_command *ac; - void *result; - u_int8_t *mbox; - int error; - - debug_called(1); - - error = 1; - result = NULL; - - /* get ourselves a command buffer */ - mtx_lock(&sc->amr_list_lock); - ac = amr_alloccmd(sc); - mtx_unlock(&sc->amr_list_lock); - if (ac == NULL) - goto out; - /* allocate the response structure */ - if ((result = malloc(bufsize, M_AMR, M_ZERO|M_NOWAIT)) == NULL) - goto out; - /* set command flags */ - - ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAIN; - - /* point the command at our data */ - ac->ac_data = result; - ac->ac_length = bufsize; - - /* build the command proper */ - mbox = (u_int8_t *)&ac->ac_mailbox; /* XXX want a real structure for this? */ - mbox[0] = cmd; - mbox[2] = cmdsub; - mbox[3] = cmdqual; - *status = 0; - - /* can't assume that interrupts are going to work here, so play it safe */ - if (sc->amr_poll_command(ac)) - goto out; - error = ac->ac_status; - *status = ac->ac_status; - - out: - mtx_lock(&sc->amr_list_lock); - if (ac != NULL) - amr_releasecmd(ac); - mtx_unlock(&sc->amr_list_lock); - if ((error != 0) && (result != NULL)) { - free(result, M_AMR); - result = NULL; - } - return(result); -} - -/******************************************************************************** - * Flush the controller's internal cache, return status. - */ -int -amr_flush(struct amr_softc *sc) -{ - struct amr_command *ac; - int error; - - /* get ourselves a command buffer */ - error = 1; - mtx_lock(&sc->amr_list_lock); - ac = amr_alloccmd(sc); - mtx_unlock(&sc->amr_list_lock); - if (ac == NULL) - goto out; - /* set command flags */ - ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; - - /* build the command proper */ - ac->ac_mailbox.mb_command = AMR_CMD_FLUSH; - - /* we have to poll, as the system may be going down or otherwise damaged */ - if (sc->amr_poll_command(ac)) - goto out; - error = ac->ac_status; - - out: - mtx_lock(&sc->amr_list_lock); - if (ac != NULL) - amr_releasecmd(ac); - mtx_unlock(&sc->amr_list_lock); - return(error); -} - -/******************************************************************************** - * Detect extented cdb >> greater than 10 byte cdb support - * returns '1' means this support exist - * returns '0' means this support doesn't exist - */ -static int -amr_support_ext_cdb(struct amr_softc *sc) -{ - struct amr_command *ac; - u_int8_t *mbox; - int error; - - /* get ourselves a command buffer */ - error = 0; - mtx_lock(&sc->amr_list_lock); - ac = amr_alloccmd(sc); - mtx_unlock(&sc->amr_list_lock); - if (ac == NULL) - goto out; - /* set command flags */ - ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; - - /* build the command proper */ - mbox = (u_int8_t *)&ac->ac_mailbox; /* XXX want a real structure for this? */ - mbox[0] = 0xA4; - mbox[2] = 0x16; - - /* we have to poll, as the system may be going down or otherwise damaged */ - if (sc->amr_poll_command(ac)) - goto out; - if( ac->ac_status == AMR_STATUS_SUCCESS ) { - error = 1; - } - -out: - mtx_lock(&sc->amr_list_lock); - if (ac != NULL) - amr_releasecmd(ac); - mtx_unlock(&sc->amr_list_lock); - return(error); -} - -/******************************************************************************** - * Try to find I/O work for the controller from one or more of the work queues. - * - * We make the assumption that if the controller is not ready to take a command - * at some given time, it will generate an interrupt at some later time when - * it is. - */ -void -amr_startio(struct amr_softc *sc) -{ - struct amr_command *ac; - - /* spin until something prevents us from doing any work */ - for (;;) { - /* Don't bother to queue commands no bounce buffers are available. */ - if (sc->amr_state & AMR_STATE_QUEUE_FRZN) - break; - - /* try to get a ready command */ - ac = amr_dequeue_ready(sc); - - /* if that failed, build a command from a bio */ - if (ac == NULL) - (void)amr_bio_command(sc, &ac); - - /* if that failed, build a command from a ccb */ - if ((ac == NULL) && (sc->amr_cam_command != NULL)) - sc->amr_cam_command(sc, &ac); - - /* if we don't have anything to do, give up */ - if (ac == NULL) - break; - - /* try to give the command to the controller; if this fails save it for later and give up */ - if (amr_start(ac)) { - debug(2, "controller busy, command deferred"); - amr_requeue_ready(ac); /* XXX schedule retry very soon? */ - break; - } - } -} - -/******************************************************************************** - * Handle completion of an I/O command. - */ -static void -amr_completeio(struct amr_command *ac) -{ - struct amrd_softc *sc = ac->ac_bio->bio_disk->d_drv1; - static struct timeval lastfail; - static int curfail; - - if (ac->ac_status != AMR_STATUS_SUCCESS) { /* could be more verbose here? */ - ac->ac_bio->bio_error = EIO; - ac->ac_bio->bio_flags |= BIO_ERROR; - - if (ppsratecheck(&lastfail, &curfail, 1)) - device_printf(sc->amrd_dev, "I/O error - 0x%x\n", ac->ac_status); -/* amr_printcommand(ac);*/ - } - amrd_intr(ac->ac_bio); - mtx_lock(&ac->ac_sc->amr_list_lock); - amr_releasecmd(ac); - mtx_unlock(&ac->ac_sc->amr_list_lock); -} - -/******************************************************************************** - ******************************************************************************** - Command Processing - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Convert a bio off the top of the bio queue into a command. - */ -static int -amr_bio_command(struct amr_softc *sc, struct amr_command **acp) -{ - struct amr_command *ac; - struct amrd_softc *amrd; - struct bio *bio; - int error; - int blkcount; - int driveno; - int cmd; - - ac = NULL; - error = 0; - - /* get a command */ - if ((ac = amr_alloccmd(sc)) == NULL) - return (ENOMEM); - - /* get a bio to work on */ - if ((bio = amr_dequeue_bio(sc)) == NULL) { - amr_releasecmd(ac); - return (0); - } - - /* connect the bio to the command */ - ac->ac_complete = amr_completeio; - ac->ac_bio = bio; - ac->ac_data = bio->bio_data; - ac->ac_length = bio->bio_bcount; - cmd = 0; - switch (bio->bio_cmd) { - case BIO_READ: - ac->ac_flags |= AMR_CMD_DATAIN; - if (AMR_IS_SG64(sc)) { - cmd = AMR_CMD_LREAD64; - ac->ac_flags |= AMR_CMD_SG64; - } else - cmd = AMR_CMD_LREAD; - break; - case BIO_WRITE: - ac->ac_flags |= AMR_CMD_DATAOUT; - if (AMR_IS_SG64(sc)) { - cmd = AMR_CMD_LWRITE64; - ac->ac_flags |= AMR_CMD_SG64; - } else - cmd = AMR_CMD_LWRITE; - break; - case BIO_FLUSH: - ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; - cmd = AMR_CMD_FLUSH; - break; - default: - biofinish(bio, NULL, EOPNOTSUPP); - amr_releasecmd(ac); - return (0); - } - amrd = (struct amrd_softc *)bio->bio_disk->d_drv1; - driveno = amrd->amrd_drive - sc->amr_drive; - blkcount = howmany(bio->bio_bcount, AMR_BLKSIZE); - - ac->ac_mailbox.mb_command = cmd; - if (bio->bio_cmd == BIO_READ || bio->bio_cmd == BIO_WRITE) { - ac->ac_mailbox.mb_blkcount = blkcount; - ac->ac_mailbox.mb_lba = bio->bio_pblkno; - if ((bio->bio_pblkno + blkcount) > sc->amr_drive[driveno].al_size) { - device_printf(sc->amr_dev, - "I/O beyond end of unit (%lld,%d > %lu)\n", - (long long)bio->bio_pblkno, blkcount, - (u_long)sc->amr_drive[driveno].al_size); - } - } - ac->ac_mailbox.mb_drive = driveno; - if (sc->amr_state & AMR_STATE_REMAP_LD) - ac->ac_mailbox.mb_drive |= 0x80; - - /* we fill in the s/g related data when the command is mapped */ - - *acp = ac; - return(error); -} - -/******************************************************************************** - * Take a command, submit it to the controller and sleep until it completes - * or fails. Interrupts must be enabled, returns nonzero on error. - */ -static int -amr_wait_command(struct amr_command *ac) -{ - int error = 0; - struct amr_softc *sc = ac->ac_sc; - - debug_called(1); - - ac->ac_complete = NULL; - ac->ac_flags |= AMR_CMD_SLEEP; - if ((error = amr_start(ac)) != 0) { - return(error); - } - - while ((ac->ac_flags & AMR_CMD_BUSY) && (error != EWOULDBLOCK)) { - error = msleep(ac,&sc->amr_list_lock, PRIBIO, "amrwcmd", 0); - } - - return(error); -} - -/******************************************************************************** - * Take a command, submit it to the controller and busy-wait for it to return. - * Returns nonzero on error. Can be safely called with interrupts enabled. - */ -static int -amr_std_poll_command(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - int error, count; - - debug_called(2); - - ac->ac_complete = NULL; - if ((error = amr_start(ac)) != 0) - return(error); - - count = 0; - do { - /* - * Poll for completion, although the interrupt handler may beat us to it. - * Note that the timeout here is somewhat arbitrary. - */ - amr_done(sc); - DELAY(1000); - } while ((ac->ac_flags & AMR_CMD_BUSY) && (count++ < 1000)); - if (!(ac->ac_flags & AMR_CMD_BUSY)) { - error = 0; - } else { - /* XXX the slot is now marked permanently busy */ - error = EIO; - device_printf(sc->amr_dev, "polled command timeout\n"); - } - return(error); -} - -static void -amr_setup_polled_dmamap(void *arg, bus_dma_segment_t *segs, int nsegs, int err) -{ - struct amr_command *ac = arg; - struct amr_softc *sc = ac->ac_sc; - int mb_channel; - - if (err) { - device_printf(sc->amr_dev, "error %d in %s", err, __FUNCTION__); - ac->ac_status = AMR_STATUS_ABORTED; - return; - } - - amr_setup_sg(arg, segs, nsegs, err); - - /* for AMR_CMD_CONFIG Read/Write the s/g count goes elsewhere */ - mb_channel = ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_channel; - if (ac->ac_mailbox.mb_command == AMR_CMD_CONFIG && - ((mb_channel == AMR_CONFIG_READ_NVRAM_CONFIG) || - (mb_channel == AMR_CONFIG_WRITE_NVRAM_CONFIG))) - ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_param = ac->ac_nsegments; - - ac->ac_mailbox.mb_nsgelem = ac->ac_nsegments; - ac->ac_mailbox.mb_physaddr = ac->ac_mb_physaddr; - if (AC_IS_SG64(ac)) { - ac->ac_sg64_hi = 0; - ac->ac_sg64_lo = ac->ac_sgbusaddr; - } - - sc->amr_poll_command1(sc, ac); -} - -/******************************************************************************** - * Take a command, submit it to the controller and busy-wait for it to return. - * Returns nonzero on error. Can be safely called with interrupts enabled. - */ -static int -amr_quartz_poll_command(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - int error; - - debug_called(2); - - error = 0; - - if (AC_IS_SG64(ac)) { - ac->ac_tag = sc->amr_buffer64_dmat; - ac->ac_datamap = ac->ac_dma64map; - } else { - ac->ac_tag = sc->amr_buffer_dmat; - ac->ac_datamap = ac->ac_dmamap; - } - - /* now we have a slot, we can map the command (unmapped in amr_complete) */ - if (ac->ac_data != 0) { - if (bus_dmamap_load(ac->ac_tag, ac->ac_datamap, ac->ac_data, - ac->ac_length, amr_setup_polled_dmamap, ac, BUS_DMA_NOWAIT) != 0) { - error = 1; - } - } else { - error = amr_quartz_poll_command1(sc, ac); - } - - return (error); -} - -static int -amr_quartz_poll_command1(struct amr_softc *sc, struct amr_command *ac) -{ - int count, error; - - mtx_lock(&sc->amr_hw_lock); - if ((sc->amr_state & AMR_STATE_INTEN) == 0) { - count=0; - while (sc->amr_busyslots) { - msleep(sc, &sc->amr_hw_lock, PRIBIO | PCATCH, "amrpoll", hz); - if(count++>10) { - break; - } - } - - if(sc->amr_busyslots) { - device_printf(sc->amr_dev, "adapter is busy\n"); - mtx_unlock(&sc->amr_hw_lock); - if (ac->ac_data != NULL) { - bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); - } - ac->ac_status=0; - return(1); - } - } - - bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, AMR_MBOX_CMDSIZE); - - /* clear the poll/ack fields in the mailbox */ - sc->amr_mailbox->mb_ident = 0xFE; - sc->amr_mailbox->mb_nstatus = 0xFF; - sc->amr_mailbox->mb_status = 0xFF; - sc->amr_mailbox->mb_poll = 0; - sc->amr_mailbox->mb_ack = 0; - sc->amr_mailbox->mb_busy = 1; - - AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT); - - while(sc->amr_mailbox->mb_nstatus == 0xFF) - DELAY(1); - while(sc->amr_mailbox->mb_status == 0xFF) - DELAY(1); - ac->ac_status=sc->amr_mailbox->mb_status; - error = (ac->ac_status !=AMR_STATUS_SUCCESS) ? 1:0; - while(sc->amr_mailbox->mb_poll != 0x77) - DELAY(1); - sc->amr_mailbox->mb_poll = 0; - sc->amr_mailbox->mb_ack = 0x77; - - /* acknowledge that we have the commands */ - AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_ACK); - while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK) - DELAY(1); - mtx_unlock(&sc->amr_hw_lock); - - /* unmap the command's data buffer */ - if (ac->ac_flags & AMR_CMD_DATAIN) { - bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, BUS_DMASYNC_POSTREAD); - } - if (ac->ac_flags & AMR_CMD_DATAOUT) { - bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, BUS_DMASYNC_POSTWRITE); - } - bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); - - return(error); -} - -static __inline int -amr_freeslot(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - int slot; - - debug_called(3); - - slot = ac->ac_slot; - if (sc->amr_busycmd[slot] == NULL) - panic("amr: slot %d not busy?\n", slot); - - sc->amr_busycmd[slot] = NULL; - atomic_subtract_int(&sc->amr_busyslots, 1); - - return (0); -} - -/******************************************************************************** - * Map/unmap (ac)'s data in the controller's addressable space as required. - * - * These functions may be safely called multiple times on a given command. - */ -static void -amr_setup_sg(void *arg, bus_dma_segment_t *segs, int nsegments, int error) -{ - struct amr_command *ac = (struct amr_command *)arg; - struct amr_sgentry *sg; - struct amr_sg64entry *sg64; - int flags, i; - - debug_called(3); - - /* get base address of s/g table */ - sg = ac->ac_sg.sg32; - sg64 = ac->ac_sg.sg64; - - if (AC_IS_SG64(ac)) { - ac->ac_nsegments = nsegments; - ac->ac_mb_physaddr = 0xffffffff; - for (i = 0; i < nsegments; i++, sg64++) { - sg64->sg_addr = segs[i].ds_addr; - sg64->sg_count = segs[i].ds_len; - } - } else { - /* decide whether we need to populate the s/g table */ - if (nsegments < 2) { - ac->ac_nsegments = 0; - ac->ac_mb_physaddr = segs[0].ds_addr; - } else { - ac->ac_nsegments = nsegments; - ac->ac_mb_physaddr = ac->ac_sgbusaddr; - for (i = 0; i < nsegments; i++, sg++) { - sg->sg_addr = segs[i].ds_addr; - sg->sg_count = segs[i].ds_len; - } - } - } - - flags = 0; - if (ac->ac_flags & AMR_CMD_DATAIN) - flags |= BUS_DMASYNC_PREREAD; - if (ac->ac_flags & AMR_CMD_DATAOUT) - flags |= BUS_DMASYNC_PREWRITE; - bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, flags); - ac->ac_flags |= AMR_CMD_MAPPED; -} - -static void -amr_setup_data(void *arg, bus_dma_segment_t *segs, int nsegs, int err) -{ - struct amr_command *ac = arg; - struct amr_softc *sc = ac->ac_sc; - int mb_channel; - - if (err) { - device_printf(sc->amr_dev, "error %d in %s", err, __FUNCTION__); - amr_abort_load(ac); - return; - } - - amr_setup_sg(arg, segs, nsegs, err); - - /* for AMR_CMD_CONFIG Read/Write the s/g count goes elsewhere */ - mb_channel = ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_channel; - if (ac->ac_mailbox.mb_command == AMR_CMD_CONFIG && - ((mb_channel == AMR_CONFIG_READ_NVRAM_CONFIG) || - (mb_channel == AMR_CONFIG_WRITE_NVRAM_CONFIG))) - ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_param = ac->ac_nsegments; - - ac->ac_mailbox.mb_nsgelem = ac->ac_nsegments; - ac->ac_mailbox.mb_physaddr = ac->ac_mb_physaddr; - if (AC_IS_SG64(ac)) { - ac->ac_sg64_hi = 0; - ac->ac_sg64_lo = ac->ac_sgbusaddr; - } - - if (sc->amr_submit_command(ac) == EBUSY) { - amr_freeslot(ac); - amr_requeue_ready(ac); - } -} - -static void -amr_setup_ccb(void *arg, bus_dma_segment_t *segs, int nsegs, int err) -{ - struct amr_command *ac = arg; - struct amr_softc *sc = ac->ac_sc; - struct amr_passthrough *ap = &ac->ac_ccb->ccb_pthru; - struct amr_ext_passthrough *aep = &ac->ac_ccb->ccb_epthru; - - if (err) { - device_printf(sc->amr_dev, "error %d in %s", err, __FUNCTION__); - amr_abort_load(ac); - return; - } - - /* Set up the mailbox portion of the command to point at the ccb */ - ac->ac_mailbox.mb_nsgelem = 0; - ac->ac_mailbox.mb_physaddr = ac->ac_ccb_busaddr; - - amr_setup_sg(arg, segs, nsegs, err); - - switch (ac->ac_mailbox.mb_command) { - case AMR_CMD_EXTPASS: - aep->ap_no_sg_elements = ac->ac_nsegments; - aep->ap_data_transfer_address = ac->ac_mb_physaddr; - break; - case AMR_CMD_PASS: - ap->ap_no_sg_elements = ac->ac_nsegments; - ap->ap_data_transfer_address = ac->ac_mb_physaddr; - break; - default: - panic("Unknown ccb command"); - } - - if (sc->amr_submit_command(ac) == EBUSY) { - amr_freeslot(ac); - amr_requeue_ready(ac); - } -} - -static int -amr_mapcmd(struct amr_command *ac) -{ - bus_dmamap_callback_t *cb; - struct amr_softc *sc = ac->ac_sc; - - debug_called(3); - - if (AC_IS_SG64(ac)) { - ac->ac_tag = sc->amr_buffer64_dmat; - ac->ac_datamap = ac->ac_dma64map; - } else { - ac->ac_tag = sc->amr_buffer_dmat; - ac->ac_datamap = ac->ac_dmamap; - } - - if (ac->ac_flags & AMR_CMD_CCB) - cb = amr_setup_ccb; - else - cb = amr_setup_data; - - /* if the command involves data at all, and hasn't been mapped */ - if ((ac->ac_flags & AMR_CMD_MAPPED) == 0 && (ac->ac_data != NULL)) { - /* map the data buffers into bus space and build the s/g list */ - if (bus_dmamap_load(ac->ac_tag, ac->ac_datamap, ac->ac_data, - ac->ac_length, cb, ac, 0) == EINPROGRESS) { - sc->amr_state |= AMR_STATE_QUEUE_FRZN; - } - } else { - if (sc->amr_submit_command(ac) == EBUSY) { - amr_freeslot(ac); - amr_requeue_ready(ac); - } - } - - return (0); -} - -static void -amr_unmapcmd(struct amr_command *ac) -{ - int flag; - - debug_called(3); - - /* if the command involved data at all and was mapped */ - if (ac->ac_flags & AMR_CMD_MAPPED) { - if (ac->ac_data != NULL) { - flag = 0; - if (ac->ac_flags & AMR_CMD_DATAIN) - flag |= BUS_DMASYNC_POSTREAD; - if (ac->ac_flags & AMR_CMD_DATAOUT) - flag |= BUS_DMASYNC_POSTWRITE; - - bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, flag); - bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); - } - - ac->ac_flags &= ~AMR_CMD_MAPPED; - } -} - -static void -amr_abort_load(struct amr_command *ac) -{ - ac_qhead_t head; - struct amr_softc *sc = ac->ac_sc; - - mtx_assert(&sc->amr_list_lock, MA_OWNED); - - ac->ac_status = AMR_STATUS_ABORTED; - amr_init_qhead(&head); - amr_enqueue_completed(ac, &head); - - mtx_unlock(&sc->amr_list_lock); - amr_complete(sc, &head); - mtx_lock(&sc->amr_list_lock); -} - -/******************************************************************************** - * Take a command and give it to the controller, returns 0 if successful, or - * EBUSY if the command should be retried later. - */ -static int -amr_start(struct amr_command *ac) -{ - struct amr_softc *sc; - int error = 0; - int slot; - - debug_called(3); - - /* mark command as busy so that polling consumer can tell */ - sc = ac->ac_sc; - ac->ac_flags |= AMR_CMD_BUSY; - - /* get a command slot (freed in amr_done) */ - slot = ac->ac_slot; - if (sc->amr_busycmd[slot] != NULL) - panic("amr: slot %d busy?\n", slot); - sc->amr_busycmd[slot] = ac; - atomic_add_int(&sc->amr_busyslots, 1); - - /* Now we have a slot, we can map the command (unmapped in amr_complete). */ - if ((error = amr_mapcmd(ac)) == ENOMEM) { - /* - * Memory resources are short, so free the slot and let this be tried - * later. - */ - amr_freeslot(ac); - } - - return (error); -} - -/******************************************************************************** - * Extract one or more completed commands from the controller (sc) - * - * Returns nonzero if any commands on the work queue were marked as completed. - */ - -int -amr_done(struct amr_softc *sc) -{ - ac_qhead_t head; - struct amr_command *ac; - struct amr_mailbox mbox; - int i, idx, result; - - debug_called(3); - - /* See if there's anything for us to do */ - result = 0; - amr_init_qhead(&head); - - /* loop collecting completed commands */ - for (;;) { - /* poll for a completed command's identifier and status */ - if (sc->amr_get_work(sc, &mbox)) { - result = 1; - - /* iterate over completed commands in this result */ - for (i = 0; i < mbox.mb_nstatus; i++) { - /* get pointer to busy command */ - idx = mbox.mb_completed[i] - 1; - ac = sc->amr_busycmd[idx]; - - /* really a busy command? */ - if (ac != NULL) { - /* pull the command from the busy index */ - amr_freeslot(ac); - - /* save status for later use */ - ac->ac_status = mbox.mb_status; - amr_enqueue_completed(ac, &head); - debug(3, "completed command with status %x", mbox.mb_status); - } else { - device_printf(sc->amr_dev, "bad slot %d completed\n", idx); - } - } - } else - break; /* no work */ - } - - /* handle completion and timeouts */ - amr_complete(sc, &head); - - return(result); -} - -/******************************************************************************** - * Do completion processing on done commands on (sc) - */ - -static void -amr_complete(void *context, ac_qhead_t *head) -{ - struct amr_softc *sc = (struct amr_softc *)context; - struct amr_command *ac; - - debug_called(3); - - /* pull completed commands off the queue */ - for (;;) { - ac = amr_dequeue_completed(sc, head); - if (ac == NULL) - break; - - /* unmap the command's data buffer */ - amr_unmapcmd(ac); - - /* - * Is there a completion handler? - */ - if (ac->ac_complete != NULL) { - /* unbusy the command */ - ac->ac_flags &= ~AMR_CMD_BUSY; - ac->ac_complete(ac); - - /* - * Is someone sleeping on this one? - */ - } else { - mtx_lock(&sc->amr_list_lock); - ac->ac_flags &= ~AMR_CMD_BUSY; - if (ac->ac_flags & AMR_CMD_SLEEP) { - /* unbusy the command */ - wakeup(ac); - } - mtx_unlock(&sc->amr_list_lock); - } - - if(!sc->amr_busyslots) { - wakeup(sc); - } - } - - mtx_lock(&sc->amr_list_lock); - sc->amr_state &= ~AMR_STATE_QUEUE_FRZN; - amr_startio(sc); - mtx_unlock(&sc->amr_list_lock); -} - -/******************************************************************************** - ******************************************************************************** - Command Buffer Management - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Get a new command buffer. - * - * This may return NULL in low-memory cases. - * - * If possible, we recycle a command buffer that's been used before. - */ -struct amr_command * -amr_alloccmd(struct amr_softc *sc) -{ - struct amr_command *ac; - - debug_called(3); - - ac = amr_dequeue_free(sc); - if (ac == NULL) { - sc->amr_state |= AMR_STATE_QUEUE_FRZN; - return(NULL); - } - - /* clear out significant fields */ - ac->ac_status = 0; - bzero(&ac->ac_mailbox, sizeof(struct amr_mailbox)); - ac->ac_flags = 0; - ac->ac_bio = NULL; - ac->ac_data = NULL; - ac->ac_complete = NULL; - ac->ac_retries = 0; - ac->ac_tag = NULL; - ac->ac_datamap = NULL; - return(ac); -} - -/******************************************************************************** - * Release a command buffer for recycling. - */ -void -amr_releasecmd(struct amr_command *ac) -{ - debug_called(3); - - amr_enqueue_free(ac); -} - -/******************************************************************************** - * Allocate a new command cluster and initialise it. - */ -static void -amr_alloccmd_cluster(struct amr_softc *sc) -{ - struct amr_command_cluster *acc; - struct amr_command *ac; - int i, nextslot; - - /* - * If we haven't found the real limit yet, let us have a couple of - * commands in order to be able to probe. - */ - if (sc->amr_maxio == 0) - sc->amr_maxio = 2; - - if (sc->amr_nextslot > sc->amr_maxio) - return; - acc = malloc(AMR_CMD_CLUSTERSIZE, M_AMR, M_NOWAIT | M_ZERO); - if (acc != NULL) { - nextslot = sc->amr_nextslot; - mtx_lock(&sc->amr_list_lock); - TAILQ_INSERT_TAIL(&sc->amr_cmd_clusters, acc, acc_link); - mtx_unlock(&sc->amr_list_lock); - for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++) { - ac = &acc->acc_command[i]; - ac->ac_sc = sc; - ac->ac_slot = nextslot; - - /* - * The SG table for each slot is a fixed size and is assumed to - * to hold 64-bit s/g objects when the driver is configured to do - * 64-bit DMA. 32-bit DMA commands still use the same table, but - * cast down to 32-bit objects. - */ - if (AMR_IS_SG64(sc)) { - ac->ac_sgbusaddr = sc->amr_sgbusaddr + - (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sg64entry)); - ac->ac_sg.sg64 = sc->amr_sg64table + (ac->ac_slot * AMR_NSEG); - } else { - ac->ac_sgbusaddr = sc->amr_sgbusaddr + - (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry)); - ac->ac_sg.sg32 = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG); - } - - ac->ac_ccb = sc->amr_ccb + ac->ac_slot; - ac->ac_ccb_busaddr = sc->amr_ccb_busaddr + - (ac->ac_slot * sizeof(union amr_ccb)); - - if (bus_dmamap_create(sc->amr_buffer_dmat, 0, &ac->ac_dmamap)) - break; - if (AMR_IS_SG64(sc) && - (bus_dmamap_create(sc->amr_buffer64_dmat, 0,&ac->ac_dma64map))) - break; - amr_releasecmd(ac); - if (++nextslot > sc->amr_maxio) - break; - } - sc->amr_nextslot = nextslot; - } -} - -/******************************************************************************** - * Free a command cluster - */ -static void -amr_freecmd_cluster(struct amr_command_cluster *acc) -{ - struct amr_softc *sc = acc->acc_command[0].ac_sc; - int i; - - for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++) { - if (acc->acc_command[i].ac_sc == NULL) - break; - bus_dmamap_destroy(sc->amr_buffer_dmat, acc->acc_command[i].ac_dmamap); - if (AMR_IS_SG64(sc)) - bus_dmamap_destroy(sc->amr_buffer64_dmat, acc->acc_command[i].ac_dma64map); - } - free(acc, M_AMR); -} - -/******************************************************************************** - ******************************************************************************** - Interface-specific Shims - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Tell the controller that the mailbox contains a valid command - */ -static int -amr_quartz_submit_command(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - static struct timeval lastfail; - static int curfail; - int i = 0; - - mtx_lock(&sc->amr_hw_lock); - while (sc->amr_mailbox->mb_busy && (i++ < 10)) { - DELAY(1); - /* This is a no-op read that flushes pending mailbox updates */ - AMR_QGET_ODB(sc); - } - if (sc->amr_mailbox->mb_busy) { - mtx_unlock(&sc->amr_hw_lock); - if (ac->ac_retries++ > 1000) { - if (ppsratecheck(&lastfail, &curfail, 1)) - device_printf(sc->amr_dev, "Too many retries on command %p. " - "Controller is likely dead\n", ac); - ac->ac_retries = 0; - } - return (EBUSY); - } - - /* - * Save the slot number so that we can locate this command when complete. - * Note that ident = 0 seems to be special, so we don't use it. - */ - ac->ac_mailbox.mb_ident = ac->ac_slot + 1; /* will be coppied into mbox */ - bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, 14); - sc->amr_mailbox->mb_busy = 1; - sc->amr_mailbox->mb_poll = 0; - sc->amr_mailbox->mb_ack = 0; - sc->amr_mailbox64->sg64_hi = ac->ac_sg64_hi; - sc->amr_mailbox64->sg64_lo = ac->ac_sg64_lo; - - AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT); - mtx_unlock(&sc->amr_hw_lock); - return(0); -} - -static int -amr_std_submit_command(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - static struct timeval lastfail; - static int curfail; - - mtx_lock(&sc->amr_hw_lock); - if (AMR_SGET_MBSTAT(sc) & AMR_SMBOX_BUSYFLAG) { - mtx_unlock(&sc->amr_hw_lock); - if (ac->ac_retries++ > 1000) { - if (ppsratecheck(&lastfail, &curfail, 1)) - device_printf(sc->amr_dev, "Too many retries on command %p. " - "Controller is likely dead\n", ac); - ac->ac_retries = 0; - } - return (EBUSY); - } - - /* - * Save the slot number so that we can locate this command when complete. - * Note that ident = 0 seems to be special, so we don't use it. - */ - ac->ac_mailbox.mb_ident = ac->ac_slot + 1; /* will be coppied into mbox */ - bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, 14); - sc->amr_mailbox->mb_busy = 1; - sc->amr_mailbox->mb_poll = 0; - sc->amr_mailbox->mb_ack = 0; - - AMR_SPOST_COMMAND(sc); - mtx_unlock(&sc->amr_hw_lock); - return(0); -} - -/******************************************************************************** - * Claim any work that the controller has completed; acknowledge completion, - * save details of the completion in (mbsave) - */ -static int -amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave) -{ - int worked, i; - u_int32_t outd; - u_int8_t nstatus; - u_int8_t completed[46]; - - debug_called(3); - - worked = 0; - - /* work waiting for us? */ - if ((outd = AMR_QGET_ODB(sc)) == AMR_QODB_READY) { - /* acknowledge interrupt */ - AMR_QPUT_ODB(sc, AMR_QODB_READY); - - while ((nstatus = sc->amr_mailbox->mb_nstatus) == 0xff) - DELAY(1); - sc->amr_mailbox->mb_nstatus = 0xff; - - /* wait until fw wrote out all completions */ - for (i = 0; i < nstatus; i++) { - while ((completed[i] = sc->amr_mailbox->mb_completed[i]) == 0xff) - DELAY(1); - sc->amr_mailbox->mb_completed[i] = 0xff; - } - - /* Save information for later processing */ - mbsave->mb_nstatus = nstatus; - mbsave->mb_status = sc->amr_mailbox->mb_status; - sc->amr_mailbox->mb_status = 0xff; - - for (i = 0; i < nstatus; i++) - mbsave->mb_completed[i] = completed[i]; - - /* acknowledge that we have the commands */ - AMR_QPUT_IDB(sc, AMR_QIDB_ACK); - -#if 0 -#ifndef AMR_QUARTZ_GOFASTER - /* - * This waits for the controller to notice that we've taken the - * command from it. It's very inefficient, and we shouldn't do it, - * but if we remove this code, we stop completing commands under - * load. - * - * Peter J says we shouldn't do this. The documentation says we - * should. Who is right? - */ - while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK) - ; /* XXX aiee! what if it dies? */ -#endif -#endif - - worked = 1; /* got some work */ - } - - return(worked); -} - -static int -amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave) -{ - int worked; - u_int8_t istat; - - debug_called(3); - - worked = 0; - - /* check for valid interrupt status */ - istat = AMR_SGET_ISTAT(sc); - if ((istat & AMR_SINTR_VALID) != 0) { - AMR_SPUT_ISTAT(sc, istat); /* ack interrupt status */ - - /* save mailbox, which contains a list of completed commands */ - bcopy((void *)(uintptr_t)(volatile void *)sc->amr_mailbox, mbsave, sizeof(*mbsave)); - - AMR_SACK_INTERRUPT(sc); /* acknowledge we have the mailbox */ - worked = 1; - } - - return(worked); -} - -/******************************************************************************** - * Notify the controller of the mailbox location. - */ -static void -amr_std_attach_mailbox(struct amr_softc *sc) -{ - - /* program the mailbox physical address */ - AMR_SBYTE_SET(sc, AMR_SMBOX_0, sc->amr_mailboxphys & 0xff); - AMR_SBYTE_SET(sc, AMR_SMBOX_1, (sc->amr_mailboxphys >> 8) & 0xff); - AMR_SBYTE_SET(sc, AMR_SMBOX_2, (sc->amr_mailboxphys >> 16) & 0xff); - AMR_SBYTE_SET(sc, AMR_SMBOX_3, (sc->amr_mailboxphys >> 24) & 0xff); - AMR_SBYTE_SET(sc, AMR_SMBOX_ENABLE, AMR_SMBOX_ADDR); - - /* clear any outstanding interrupt and enable interrupts proper */ - AMR_SACK_INTERRUPT(sc); - AMR_SENABLE_INTR(sc); -} - -#ifdef AMR_BOARD_INIT -/******************************************************************************** - * Initialise the controller - */ -static int -amr_quartz_init(struct amr_softc *sc) -{ - int status, ostatus; - - device_printf(sc->amr_dev, "initial init status %x\n", AMR_QGET_INITSTATUS(sc)); - - AMR_QRESET(sc); - - ostatus = 0xff; - while ((status = AMR_QGET_INITSTATUS(sc)) != AMR_QINIT_DONE) { - if (status != ostatus) { - device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_qinit, status)); - ostatus = status; - } - switch (status) { - case AMR_QINIT_NOMEM: - return(ENOMEM); - - case AMR_QINIT_SCAN: - /* XXX we could print channel/target here */ - break; - } - } - return(0); -} - -static int -amr_std_init(struct amr_softc *sc) -{ - int status, ostatus; - - device_printf(sc->amr_dev, "initial init status %x\n", AMR_SGET_INITSTATUS(sc)); - - AMR_SRESET(sc); - - ostatus = 0xff; - while ((status = AMR_SGET_INITSTATUS(sc)) != AMR_SINIT_DONE) { - if (status != ostatus) { - device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_sinit, status)); - ostatus = status; - } - switch (status) { - case AMR_SINIT_NOMEM: - return(ENOMEM); - - case AMR_SINIT_INPROG: - /* XXX we could print channel/target here? */ - break; - } - } - return(0); -} -#endif - -/******************************************************************************** - ******************************************************************************** - Debugging - ******************************************************************************** - ********************************************************************************/ - -/******************************************************************************** - * Identify the controller and print some information about it. - */ -static void -amr_describe_controller(struct amr_softc *sc) -{ - struct amr_prodinfo *ap; - struct amr_enquiry *ae; - char *prod; - int status; - - /* - * Try to get 40LD product info, which tells us what the card is labelled as. - */ - if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0, &status)) != NULL) { - device_printf(sc->amr_dev, " Firmware %.16s, BIOS %.16s, %dMB RAM\n", - ap->ap_product, ap->ap_firmware, ap->ap_bios, - ap->ap_memsize); - - free(ap, M_AMR); - return; - } - - /* - * Try 8LD extended ENQUIRY to get controller signature, and use lookup table. - */ - if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0, &status)) != NULL) { - prod = amr_describe_code(amr_table_adaptertype, ae->ae_signature); - - } else if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0, &status)) != NULL) { - /* - * Try to work it out based on the PCI signatures. - */ - switch (pci_get_device(sc->amr_dev)) { - case 0x9010: - prod = "Series 428"; - break; - case 0x9060: - prod = "Series 434"; - break; - default: - prod = "unknown controller"; - break; - } - } else { - device_printf(sc->amr_dev, "\n"); - return; - } - - /* - * HP NetRaid controllers have a special encoding of the firmware and - * BIOS versions. The AMI version seems to have it as strings whereas - * the HP version does it with a leading uppercase character and two - * binary numbers. - */ - - if(ae->ae_adapter.aa_firmware[2] >= 'A' && - ae->ae_adapter.aa_firmware[2] <= 'Z' && - ae->ae_adapter.aa_firmware[1] < ' ' && - ae->ae_adapter.aa_firmware[0] < ' ' && - ae->ae_adapter.aa_bios[2] >= 'A' && - ae->ae_adapter.aa_bios[2] <= 'Z' && - ae->ae_adapter.aa_bios[1] < ' ' && - ae->ae_adapter.aa_bios[0] < ' ') { - /* this looks like we have an HP NetRaid version of the MegaRaid */ - - if(ae->ae_signature == AMR_SIG_438) { - /* the AMI 438 is a NetRaid 3si in HP-land */ - prod = "HP NetRaid 3si"; - } - - device_printf(sc->amr_dev, "<%s> Firmware %c.%02d.%02d, BIOS %c.%02d.%02d, %dMB RAM\n", - prod, ae->ae_adapter.aa_firmware[2], - ae->ae_adapter.aa_firmware[1], - ae->ae_adapter.aa_firmware[0], - ae->ae_adapter.aa_bios[2], - ae->ae_adapter.aa_bios[1], - ae->ae_adapter.aa_bios[0], - ae->ae_adapter.aa_memorysize); - } else { - device_printf(sc->amr_dev, "<%s> Firmware %.4s, BIOS %.4s, %dMB RAM\n", - prod, ae->ae_adapter.aa_firmware, ae->ae_adapter.aa_bios, - ae->ae_adapter.aa_memorysize); - } - free(ae, M_AMR); -} - -int -amr_dump_blocks(struct amr_softc *sc, int unit, u_int32_t lba, void *data, int blks) -{ - struct amr_command *ac; - int error = EIO; - - debug_called(1); - - sc->amr_state |= AMR_STATE_INTEN; - - /* get ourselves a command buffer */ - if ((ac = amr_alloccmd(sc)) == NULL) - goto out; - /* set command flags */ - ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; - - /* point the command at our data */ - ac->ac_data = data; - ac->ac_length = blks * AMR_BLKSIZE; - - /* build the command proper */ - ac->ac_mailbox.mb_command = AMR_CMD_LWRITE; - ac->ac_mailbox.mb_blkcount = blks; - ac->ac_mailbox.mb_lba = lba; - ac->ac_mailbox.mb_drive = unit; - - /* can't assume that interrupts are going to work here, so play it safe */ - if (sc->amr_poll_command(ac)) - goto out; - error = ac->ac_status; - - out: - if (ac != NULL) - amr_releasecmd(ac); - - sc->amr_state &= ~AMR_STATE_INTEN; - return (error); -} - -#ifdef AMR_DEBUG -/******************************************************************************** - * Print the command (ac) in human-readable format - */ -#if 0 -static void -amr_printcommand(struct amr_command *ac) -{ - struct amr_softc *sc = ac->ac_sc; - struct amr_sgentry *sg; - int i; - - device_printf(sc->amr_dev, "cmd %x ident %d drive %d\n", - ac->ac_mailbox.mb_command, ac->ac_mailbox.mb_ident, ac->ac_mailbox.mb_drive); - device_printf(sc->amr_dev, "blkcount %d lba %d\n", - ac->ac_mailbox.mb_blkcount, ac->ac_mailbox.mb_lba); - device_printf(sc->amr_dev, "virtaddr %p length %lu\n", ac->ac_data, (unsigned long)ac->ac_length); - device_printf(sc->amr_dev, "sg physaddr %08x nsg %d\n", - ac->ac_mailbox.mb_physaddr, ac->ac_mailbox.mb_nsgelem); - device_printf(sc->amr_dev, "ccb %p bio %p\n", ac->ac_ccb_data, ac->ac_bio); - - /* get base address of s/g table */ - sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG); - for (i = 0; i < ac->ac_mailbox.mb_nsgelem; i++, sg++) - device_printf(sc->amr_dev, " %x/%d\n", sg->sg_addr, sg->sg_count); -} -#endif -#endif diff --git a/sys/dev/amr/amr_cam.c b/sys/dev/amr/amr_cam.c deleted file mode 100644 index a8dd9def064a..000000000000 --- a/sys/dev/amr/amr_cam.c +++ /dev/null @@ -1,627 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/*- - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -static int amr_cam_probe(device_t dev); -static int amr_cam_attach(device_t dev); -static int amr_cam_detach(device_t dev); -static void amr_cam_action(struct cam_sim *sim, union ccb *ccb); -static void amr_cam_poll(struct cam_sim *sim); -static void amr_cam_complete(struct amr_command *ac); -static int amr_cam_command(struct amr_softc *sc, struct amr_command **acp); - -static devclass_t amr_pass_devclass; - -static device_method_t amr_pass_methods[] = { - DEVMETHOD(device_probe, amr_cam_probe), - DEVMETHOD(device_attach, amr_cam_attach), - DEVMETHOD(device_detach, amr_cam_detach), - { 0, 0 } -}; - -static driver_t amr_pass_driver = { - "amrp", - amr_pass_methods, - 0 -}; - -DRIVER_MODULE(amrp, amr, amr_pass_driver, amr_pass_devclass, 0, 0); -MODULE_DEPEND(amrp, cam, 1, 1, 1); - -static MALLOC_DEFINE(M_AMRCAM, "amrcam", "AMR CAM memory"); - -/*********************************************************************** - * Enqueue/dequeue functions - */ -static __inline void -amr_enqueue_ccb(struct amr_softc *sc, union ccb *ccb) -{ - - TAILQ_INSERT_TAIL(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe); -} - -static __inline void -amr_requeue_ccb(struct amr_softc *sc, union ccb *ccb) -{ - - TAILQ_INSERT_HEAD(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe); -} - -static __inline union ccb * -amr_dequeue_ccb(struct amr_softc *sc) -{ - union ccb *ccb; - - if ((ccb = (union ccb *)TAILQ_FIRST(&sc->amr_cam_ccbq)) != NULL) - TAILQ_REMOVE(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe); - return(ccb); -} - -static int -amr_cam_probe(device_t dev) -{ - return (0); -} - -/******************************************************************************** - * Attach our 'real' SCSI channels to CAM - */ -static int -amr_cam_attach(device_t dev) -{ - struct amr_softc *sc; - struct cam_devq *devq; - int chn, error; - - sc = device_get_softc(dev); - - /* initialise the ccb queue */ - TAILQ_INIT(&sc->amr_cam_ccbq); - - /* - * Allocate a devq for all our channels combined. This should - * allow for the maximum number of SCSI commands we will accept - * at one time. Save the pointer in the softc so we can find it later - * during detach. - */ - if ((devq = cam_simq_alloc(AMR_MAX_SCSI_CMDS)) == NULL) - return(ENOMEM); - sc->amr_cam_devq = devq; - - /* - * Iterate over our channels, registering them with CAM - */ - for (chn = 0; chn < sc->amr_maxchan; chn++) { - /* allocate a sim */ - if ((sc->amr_cam_sim[chn] = cam_sim_alloc(amr_cam_action, - amr_cam_poll, "amr", sc, device_get_unit(sc->amr_dev), - &sc->amr_list_lock, 1, AMR_MAX_SCSI_CMDS, devq)) == NULL) { - cam_simq_free(devq); - device_printf(sc->amr_dev, "CAM SIM attach failed\n"); - return(ENOMEM); - } - - /* register the bus ID so we can get it later */ - mtx_lock(&sc->amr_list_lock); - error = xpt_bus_register(sc->amr_cam_sim[chn], sc->amr_dev,chn); - mtx_unlock(&sc->amr_list_lock); - if (error) { - device_printf(sc->amr_dev, - "CAM XPT bus registration failed\n"); - return(ENXIO); - } - } - /* - * XXX we should scan the config and work out which devices are - * actually protected. - */ - sc->amr_cam_command = amr_cam_command; - return(0); -} - -/******************************************************************************** - * Disconnect ourselves from CAM - */ -static int -amr_cam_detach(device_t dev) -{ - struct amr_softc *sc; - int chn; - - sc = device_get_softc(dev); - mtx_lock(&sc->amr_list_lock); - for (chn = 0; chn < sc->amr_maxchan; chn++) { - /* - * If a sim was allocated for this channel, free it - */ - if (sc->amr_cam_sim[chn] != NULL) { - xpt_bus_deregister(cam_sim_path(sc->amr_cam_sim[chn])); - cam_sim_free(sc->amr_cam_sim[chn], FALSE); - } - } - mtx_unlock(&sc->amr_list_lock); - - /* Now free the devq */ - if (sc->amr_cam_devq != NULL) - cam_simq_free(sc->amr_cam_devq); - - return (0); -} - -/*********************************************************************** - *********************************************************************** - CAM passthrough interface - *********************************************************************** - ***********************************************************************/ - -/*********************************************************************** - * Handle a request for action from CAM - */ -static void -amr_cam_action(struct cam_sim *sim, union ccb *ccb) -{ - struct amr_softc *sc = cam_sim_softc(sim); - - switch(ccb->ccb_h.func_code) { - /* - * Perform SCSI I/O to a physical device. - */ - case XPT_SCSI_IO: - { - struct ccb_hdr *ccbh = &ccb->ccb_h; - struct ccb_scsiio *csio = &ccb->csio; - - /* Validate the CCB */ - ccbh->status = CAM_REQ_INPROG; - - /* check the CDB length */ - if (csio->cdb_len > AMR_MAX_EXTCDB_LEN) - ccbh->status = CAM_REQ_INVALID; - - if ((csio->cdb_len > AMR_MAX_CDB_LEN) && - (sc->support_ext_cdb == 0)) - ccbh->status = CAM_REQ_INVALID; - - /* check that the CDB pointer is not to a physical address */ - if ((ccbh->flags & CAM_CDB_POINTER) && - (ccbh->flags & CAM_CDB_PHYS)) - ccbh->status = CAM_REQ_INVALID; - /* - * if there is data transfer, it must be to/from a virtual - * address - */ - if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { - if ((ccbh->flags & CAM_DATA_MASK) != CAM_DATA_VADDR) - /* we can't map it */ - ccbh->status = CAM_REQ_INVALID; - } - - /* - * If the command is to a LUN other than 0, fail it. - * This is probably incorrect, but during testing the - * firmware did not seem to respect the LUN field, and thus - * devices appear echoed. - */ - if (csio->ccb_h.target_lun != 0) - ccbh->status = CAM_DEV_NOT_THERE; - - /* if we're happy with the request, queue it for attention */ - if (ccbh->status == CAM_REQ_INPROG) { - /* save the channel number in the ccb */ - csio->ccb_h.sim_priv.entries[0].field= cam_sim_bus(sim); - - amr_enqueue_ccb(sc, ccb); - amr_startio(sc); - return; - } - break; - } - - case XPT_CALC_GEOMETRY: - { - cam_calc_geometry(&ccb->ccg, /*extended*/1); - break; - } - - /* - * Return path stats. Some of these should probably be amended. - */ - case XPT_PATH_INQ: - { - struct ccb_pathinq *cpi = & ccb->cpi; - - debug(3, "XPT_PATH_INQ"); - cpi->version_num = 1; /* XXX??? */ - cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; - cpi->target_sprt = 0; - cpi->hba_misc = PIM_NOBUSRESET|PIM_SEQSCAN; - cpi->hba_eng_cnt = 0; - cpi->max_target = AMR_MAX_TARGETS; - cpi->max_lun = 0 /* AMR_MAX_LUNS*/; - cpi->initiator_id = 7; /* XXX variable? */ - strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); - strlcpy(cpi->hba_vid, "LSI", HBA_IDLEN); - strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); - cpi->unit_number = cam_sim_unit(sim); - cpi->bus_id = cam_sim_bus(sim); - cpi->base_transfer_speed = 132 * 1024; /* XXX */ - cpi->transport = XPORT_SPI; - cpi->transport_version = 2; - cpi->protocol = PROTO_SCSI; - cpi->protocol_version = SCSI_REV_2; - cpi->ccb_h.status = CAM_REQ_CMP; - - break; - } - - case XPT_RESET_BUS: - { - struct ccb_pathinq *cpi = & ccb->cpi; - - debug(1, "XPT_RESET_BUS"); - cpi->ccb_h.status = CAM_REQ_CMP; - break; - } - - case XPT_RESET_DEV: - { - debug(1, "XPT_RESET_DEV"); - ccb->ccb_h.status = CAM_REQ_CMP; - break; - } - - case XPT_GET_TRAN_SETTINGS: - { - struct ccb_trans_settings *cts = &(ccb->cts); - - debug(3, "XPT_GET_TRAN_SETTINGS"); - - struct ccb_trans_settings_scsi *scsi; - struct ccb_trans_settings_spi *spi; - - scsi = &cts->proto_specific.scsi; - spi = &cts->xport_specific.spi; - - cts->protocol = PROTO_SCSI; - cts->protocol_version = SCSI_REV_2; - cts->transport = XPORT_SPI; - cts->transport_version = 2; - - if (cts->type == CTS_TYPE_USER_SETTINGS) { - ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; - break; - } - - spi->flags = CTS_SPI_FLAGS_DISC_ENB; - spi->bus_width = MSG_EXT_WDTR_BUS_32_BIT; - spi->sync_period = 6; /* 40MHz how wide is this bus? */ - spi->sync_offset = 31; /* How to extract this from board? */ - - spi->valid = CTS_SPI_VALID_SYNC_RATE - | CTS_SPI_VALID_SYNC_OFFSET - | CTS_SPI_VALID_BUS_WIDTH - | CTS_SPI_VALID_DISC; - scsi->valid = CTS_SCSI_VALID_TQ; - ccb->ccb_h.status = CAM_REQ_CMP; - break; - } - - case XPT_SET_TRAN_SETTINGS: - debug(3, "XPT_SET_TRAN_SETTINGS"); - ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; - break; - - /* - * Reject anything else as unsupported. - */ - default: - /* we can't do this */ - ccb->ccb_h.status = CAM_REQ_INVALID; - break; - } - - mtx_assert(&sc->amr_list_lock, MA_OWNED); - xpt_done(ccb); -} - -/*********************************************************************** - * Convert a CAM CCB off the top of the CCB queue to a passthrough SCSI - * command. - */ -static int -amr_cam_command(struct amr_softc *sc, struct amr_command **acp) -{ - struct amr_command *ac; - struct amr_passthrough *ap; - struct amr_ext_passthrough *aep; - struct ccb_scsiio *csio; - int bus, target, error; - - error = 0; - ac = NULL; - ap = NULL; - aep = NULL; - - /* check to see if there is a ccb for us to work with */ - if ((csio = (struct ccb_scsiio *)amr_dequeue_ccb(sc)) == NULL) - goto out; - - /* get bus/target, XXX validate against protected devices? */ - bus = csio->ccb_h.sim_priv.entries[0].field; - target = csio->ccb_h.target_id; - - /* - * Build a passthrough command. - */ - - /* construct command */ - if ((ac = amr_alloccmd(sc)) == NULL) { - error = ENOMEM; - goto out; - } - - /* construct passthrough */ - if (sc->support_ext_cdb ) { - aep = &ac->ac_ccb->ccb_epthru; - aep->ap_timeout = 2; - aep->ap_ars = 1; - aep->ap_request_sense_length = 14; - aep->ap_islogical = 0; - aep->ap_channel = bus; - aep->ap_scsi_id = target; - aep->ap_logical_drive_no = csio->ccb_h.target_lun; - aep->ap_cdb_length = csio->cdb_len; - aep->ap_data_transfer_length = csio->dxfer_len; - if (csio->ccb_h.flags & CAM_CDB_POINTER) { - bcopy(csio->cdb_io.cdb_ptr, aep->ap_cdb, csio->cdb_len); - } else { - bcopy(csio->cdb_io.cdb_bytes, aep->ap_cdb, - csio->cdb_len); - } - /* - * we leave the data s/g list and s/g count to the map routine - * later - */ - - debug(2, " COMMAND %x/%d+%d to %d:%d:%d", aep->ap_cdb[0], - aep->ap_cdb_length, csio->dxfer_len, aep->ap_channel, - aep->ap_scsi_id, aep->ap_logical_drive_no); - - } else { - ap = &ac->ac_ccb->ccb_pthru; - ap->ap_timeout = 0; - ap->ap_ars = 1; - ap->ap_request_sense_length = 14; - ap->ap_islogical = 0; - ap->ap_channel = bus; - ap->ap_scsi_id = target; - ap->ap_logical_drive_no = csio->ccb_h.target_lun; - ap->ap_cdb_length = csio->cdb_len; - ap->ap_data_transfer_length = csio->dxfer_len; - if (csio->ccb_h.flags & CAM_CDB_POINTER) { - bcopy(csio->cdb_io.cdb_ptr, ap->ap_cdb, csio->cdb_len); - } else { - bcopy(csio->cdb_io.cdb_bytes, ap->ap_cdb, - csio->cdb_len); - } - /* - * we leave the data s/g list and s/g count to the map routine - * later - */ - - debug(2, " COMMAND %x/%d+%d to %d:%d:%d", ap->ap_cdb[0], - ap->ap_cdb_length, csio->dxfer_len, ap->ap_channel, - ap->ap_scsi_id, ap->ap_logical_drive_no); - } - - ac->ac_flags |= AMR_CMD_CCB; - - ac->ac_data = csio->data_ptr; - ac->ac_length = csio->dxfer_len; - if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) - ac->ac_flags |= AMR_CMD_DATAIN; - if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) - ac->ac_flags |= AMR_CMD_DATAOUT; - - ac->ac_private = csio; - ac->ac_complete = amr_cam_complete; - if ( sc->support_ext_cdb ) { - ac->ac_mailbox.mb_command = AMR_CMD_EXTPASS; - } else { - ac->ac_mailbox.mb_command = AMR_CMD_PASS; - } - -out: - if (error != 0) { - if (ac != NULL) - amr_releasecmd(ac); - if (csio != NULL) - /* put it back and try again later */ - amr_requeue_ccb(sc, (union ccb *)csio); - } - *acp = ac; - return(error); -} - -/*********************************************************************** - * Check for interrupt status - */ -static void -amr_cam_poll(struct cam_sim *sim) -{ - - amr_done(cam_sim_softc(sim)); -} - - /********************************************************************** - * Handle completion of a command submitted via CAM. - */ -static void -amr_cam_complete(struct amr_command *ac) -{ - struct amr_passthrough *ap; - struct amr_ext_passthrough *aep; - struct ccb_scsiio *csio; - struct scsi_inquiry_data *inq; - int scsi_status, cdb0; - - ap = &ac->ac_ccb->ccb_pthru; - aep = &ac->ac_ccb->ccb_epthru; - csio = (struct ccb_scsiio *)ac->ac_private; - inq = (struct scsi_inquiry_data *)csio->data_ptr; - - if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS) - scsi_status = aep->ap_scsi_status; - else - scsi_status = ap->ap_scsi_status; - debug(1, "status 0x%x AP scsi_status 0x%x", ac->ac_status, - scsi_status); - - /* Make sure the status is sane */ - if ((ac->ac_status != AMR_STATUS_SUCCESS) && (scsi_status == 0)) { - csio->ccb_h.status = CAM_REQ_CMP_ERR; - goto out; - } - - /* - * Hide disks from CAM so that they're not picked up and treated as - * 'normal' disks. - * - * If the configuration provides a mechanism to mark a disk a "not - * managed", we could add handling for that to allow disks to be - * selectively visible. - */ - - /* handle passthrough SCSI status */ - switch(scsi_status) { - case 0: /* completed OK */ - if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS) - cdb0 = aep->ap_cdb[0]; - else - cdb0 = ap->ap_cdb[0]; - if ((cdb0 == INQUIRY) && (SID_TYPE(inq) == T_DIRECT)) - inq->device = (inq->device & 0xe0) | T_NODEVICE; - csio->ccb_h.status = CAM_REQ_CMP; - break; - - case 0x02: - csio->ccb_h.status = CAM_SCSI_STATUS_ERROR; - csio->scsi_status = SCSI_STATUS_CHECK_COND; - if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS) - bcopy(aep->ap_request_sense_area, &csio->sense_data, - AMR_MAX_REQ_SENSE_LEN); - else - bcopy(ap->ap_request_sense_area, &csio->sense_data, - AMR_MAX_REQ_SENSE_LEN); - csio->sense_len = AMR_MAX_REQ_SENSE_LEN; - csio->ccb_h.status |= CAM_AUTOSNS_VALID; - break; - - case 0x08: - csio->ccb_h.status = CAM_SCSI_BUSY; - break; - - case 0xf0: - case 0xf4: - default: - /* - * Non-zero LUNs are already filtered, so there's no need - * to return CAM_DEV_NOT_THERE. - */ - csio->ccb_h.status = CAM_SEL_TIMEOUT; - break; - } - -out: - if ((csio->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) - debug(2, "%*D\n", imin(csio->dxfer_len, 16), csio->data_ptr, - " "); - - mtx_lock(&ac->ac_sc->amr_list_lock); - xpt_done((union ccb *)csio); - amr_releasecmd(ac); - mtx_unlock(&ac->ac_sc->amr_list_lock); -} diff --git a/sys/dev/amr/amr_disk.c b/sys/dev/amr/amr_disk.c deleted file mode 100644 index 4eee088345f8..000000000000 --- a/sys/dev/amr/amr_disk.c +++ /dev/null @@ -1,267 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 1999 Jonathan Lemon - * Copyright (c) 1999, 2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/*- - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -/* - * Disk driver for AMI MegaRaid controllers - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -/* prototypes */ -static int amrd_probe(device_t dev); -static int amrd_attach(device_t dev); -static int amrd_detach(device_t dev); - -static disk_open_t amrd_open; -static disk_strategy_t amrd_strategy; - -static devclass_t amrd_devclass; -#ifdef FREEBSD_4 -int amr_disks_registered = 0; -#endif - -static device_method_t amrd_methods[] = { - DEVMETHOD(device_probe, amrd_probe), - DEVMETHOD(device_attach, amrd_attach), - DEVMETHOD(device_detach, amrd_detach), - { 0, 0 } -}; - -static driver_t amrd_driver = { - "amrd", - amrd_methods, - sizeof(struct amrd_softc) -}; - -DRIVER_MODULE(amrd, amr, amrd_driver, amrd_devclass, 0, 0); - -static int -amrd_open(struct disk *dp) -{ - struct amrd_softc *sc = (struct amrd_softc *)dp->d_drv1; - - debug_called(1); - - if (sc == NULL) - return (ENXIO); - - /* controller not active? */ - if (sc->amrd_controller->amr_state & AMR_STATE_SHUTDOWN) - return(ENXIO); - - return (0); -} -/******************************************************************************** - * System crashdump support - */ - -static int -amrd_dump(void *arg, void *virtual, vm_offset_t physical, off_t offset, size_t length) -{ - - struct amrd_softc *amrd_sc; - struct amr_softc *amr_sc; - int error; - struct disk *dp; - - dp = arg; - amrd_sc = (struct amrd_softc *)dp->d_drv1; - if (amrd_sc == NULL) - return(ENXIO); - amr_sc = (struct amr_softc *)amrd_sc->amrd_controller; - - if (length > 0) { - int driveno = amrd_sc->amrd_drive - amr_sc->amr_drive; - if ((error = amr_dump_blocks(amr_sc,driveno,offset / AMR_BLKSIZE ,(void *)virtual,(int) length / AMR_BLKSIZE )) != 0) - return(error); - } - return(0); -} - -/* - * Read/write routine for a buffer. Finds the proper unit, range checks - * arguments, and schedules the transfer. Does not wait for the transfer - * to complete. Multi-page transfers are supported. All I/O requests must - * be a multiple of a sector in length. - */ -static void -amrd_strategy(struct bio *bio) -{ - struct amrd_softc *sc = (struct amrd_softc *)bio->bio_disk->d_drv1; - - /* bogus disk? */ - if (sc == NULL) { - bio->bio_error = EINVAL; - goto bad; - } - - amr_submit_bio(sc->amrd_controller, bio); - return; - - bad: - bio->bio_flags |= BIO_ERROR; - - /* - * Correctly set the buf to indicate a completed transfer - */ - bio->bio_resid = bio->bio_bcount; - biodone(bio); - return; -} - -void -amrd_intr(void *data) -{ - struct bio *bio = (struct bio *)data; - - debug_called(2); - - if (bio->bio_flags & BIO_ERROR) { - bio->bio_error = EIO; - debug(1, "i/o error\n"); - } else { - bio->bio_resid = 0; - } - - biodone(bio); -} - -static int -amrd_probe(device_t dev) -{ - - debug_called(1); - - device_set_desc(dev, "LSILogic MegaRAID logical drive"); - return (0); -} - -static int -amrd_attach(device_t dev) -{ - struct amrd_softc *sc = (struct amrd_softc *)device_get_softc(dev); - device_t parent; - - debug_called(1); - - parent = device_get_parent(dev); - sc->amrd_controller = (struct amr_softc *)device_get_softc(parent); - sc->amrd_unit = device_get_unit(dev); - sc->amrd_drive = device_get_ivars(dev); - sc->amrd_dev = dev; - - device_printf(dev, "%uMB (%u sectors) RAID %d (%s)\n", - sc->amrd_drive->al_size / ((1024 * 1024) / AMR_BLKSIZE), - sc->amrd_drive->al_size, sc->amrd_drive->al_properties & AMR_DRV_RAID_MASK, - amr_describe_code(amr_table_drvstate, AMR_DRV_CURSTATE(sc->amrd_drive->al_state))); - - sc->amrd_disk = disk_alloc(); - sc->amrd_disk->d_drv1 = sc; - sc->amrd_disk->d_maxsize = (AMR_NSEG - 1) * PAGE_SIZE; - sc->amrd_disk->d_open = amrd_open; - sc->amrd_disk->d_strategy = amrd_strategy; - sc->amrd_disk->d_name = "amrd"; - sc->amrd_disk->d_dump = (dumper_t *)amrd_dump; - sc->amrd_disk->d_unit = sc->amrd_unit; - sc->amrd_disk->d_flags = DISKFLAG_CANFLUSHCACHE; - sc->amrd_disk->d_sectorsize = AMR_BLKSIZE; - sc->amrd_disk->d_mediasize = (off_t)sc->amrd_drive->al_size * AMR_BLKSIZE; - sc->amrd_disk->d_fwsectors = sc->amrd_drive->al_sectors; - sc->amrd_disk->d_fwheads = sc->amrd_drive->al_heads; - disk_create(sc->amrd_disk, DISK_VERSION); - - return (0); -} - -static int -amrd_detach(device_t dev) -{ - struct amrd_softc *sc = (struct amrd_softc *)device_get_softc(dev); - - debug_called(1); - - if (sc->amrd_disk->d_flags & DISKFLAG_OPEN) - return(EBUSY); - -#ifdef FREEBSD_4 - if (--amr_disks_registered == 0) - cdevsw_remove(&amrddisk_cdevsw); -#else - disk_destroy(sc->amrd_disk); -#endif - return(0); -} diff --git a/sys/dev/amr/amr_linux.c b/sys/dev/amr/amr_linux.c deleted file mode 100644 index 9e0a5cac693e..000000000000 --- a/sys/dev/amr/amr_linux.c +++ /dev/null @@ -1,87 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2005 Paul Saab - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(__amd64__) /* Assume amd64 wants 32 bit Linux */ -#include -#include -#else -#include -#include -#endif -#include - -/* There are multiple ioctl number ranges that need to be handled */ -#define AMR_LINUX_IOCTL_MIN 0x6d00 -#define AMR_LINUX_IOCTL_MAX 0x6d01 - -static linux_ioctl_function_t amr_linux_ioctl; -static struct linux_ioctl_handler amr_linux_handler = {amr_linux_ioctl, - AMR_LINUX_IOCTL_MIN, - AMR_LINUX_IOCTL_MAX}; - -SYSINIT (amr_register, SI_SUB_KLD, SI_ORDER_MIDDLE, - linux_ioctl_register_handler, &amr_linux_handler); -SYSUNINIT(amr_unregister, SI_SUB_KLD, SI_ORDER_MIDDLE, - linux_ioctl_unregister_handler, &amr_linux_handler); - -static int -amr_linux_modevent(module_t mod, int cmd, void *data) -{ - return (0); -} - -DEV_MODULE(amr_linux, amr_linux_modevent, NULL); -MODULE_DEPEND(amr, linux, 1, 1, 1); - -static int -amr_linux_ioctl(struct thread *p, struct linux_ioctl_args *args) -{ - cap_rights_t rights; - struct file *fp; - int error; - - error = fget(p, args->fd, cap_rights_init_one(&rights, CAP_IOCTL), &fp); - if (error != 0) - return (error); - error = fo_ioctl(fp, args->cmd, (caddr_t)args->arg, p->td_ucred, p); - fdrop(fp, p); - return (error); -} diff --git a/sys/dev/amr/amr_pci.c b/sys/dev/amr/amr_pci.c deleted file mode 100644 index dd7128e372ef..000000000000 --- a/sys/dev/amr/amr_pci.c +++ /dev/null @@ -1,705 +0,0 @@ -/*- - * Copyright (c) 1999,2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002, 2004 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include - -static int amr_pci_probe(device_t dev); -static int amr_pci_attach(device_t dev); -static int amr_pci_detach(device_t dev); -static int amr_pci_shutdown(device_t dev); -static int amr_pci_suspend(device_t dev); -static int amr_pci_resume(device_t dev); -static void amr_pci_intr(void *arg); -static void amr_pci_free(struct amr_softc *sc); -static void amr_sglist_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error); -static int amr_sglist_map(struct amr_softc *sc); -static int amr_setup_mbox(struct amr_softc *sc); -static int amr_ccb_map(struct amr_softc *sc); - -static u_int amr_force_sg32 = 0; -SYSCTL_DECL(_hw_amr); -SYSCTL_UINT(_hw_amr, OID_AUTO, force_sg32, CTLFLAG_RDTUN, &amr_force_sg32, 0, - "Force the AMR driver to use 32bit scatter gather"); - -static device_method_t amr_methods[] = { - /* Device interface */ - DEVMETHOD(device_probe, amr_pci_probe), - DEVMETHOD(device_attach, amr_pci_attach), - DEVMETHOD(device_detach, amr_pci_detach), - DEVMETHOD(device_shutdown, amr_pci_shutdown), - DEVMETHOD(device_suspend, amr_pci_suspend), - DEVMETHOD(device_resume, amr_pci_resume), - - DEVMETHOD_END -}; - -static driver_t amr_pci_driver = { - "amr", - amr_methods, - sizeof(struct amr_softc) -}; - -static struct amr_ident -{ - uint16_t vendor; - uint16_t device; - int flags; -#define AMR_ID_PROBE_SIG (1<<0) /* generic i960RD, check signature */ -#define AMR_ID_DO_SG64 (1<<1) -#define AMR_ID_QUARTZ (1<<2) -} amr_device_ids[] = { - {0x101e, 0x9010, 0}, - {0x101e, 0x9060, 0}, - {0x8086, 0x1960, AMR_ID_QUARTZ | AMR_ID_PROBE_SIG}, - {0x101e, 0x1960, AMR_ID_QUARTZ}, - {0x1000, 0x1960, AMR_ID_QUARTZ | AMR_ID_DO_SG64 | AMR_ID_PROBE_SIG}, - {0x1000, 0x0407, AMR_ID_QUARTZ | AMR_ID_DO_SG64}, - {0x1000, 0x0408, AMR_ID_QUARTZ | AMR_ID_DO_SG64}, - {0x1000, 0x0409, AMR_ID_QUARTZ | AMR_ID_DO_SG64}, - {0x1028, 0x000e, AMR_ID_QUARTZ | AMR_ID_DO_SG64 | AMR_ID_PROBE_SIG}, /* perc4/di i960 */ - {0x1028, 0x000f, AMR_ID_QUARTZ | AMR_ID_DO_SG64}, /* perc4/di Verde*/ - {0x1028, 0x0013, AMR_ID_QUARTZ | AMR_ID_DO_SG64}, /* perc4/di */ - {0, 0, 0} -}; - -static devclass_t amr_devclass; -DRIVER_MODULE(amr, pci, amr_pci_driver, amr_devclass, 0, 0); -MODULE_PNP_INFO("U16:vendor;U16:device", pci, amr, amr_device_ids, - nitems(amr_device_ids) - 1); -MODULE_DEPEND(amr, pci, 1, 1, 1); -MODULE_DEPEND(amr, cam, 1, 1, 1); - -static struct amr_ident * -amr_find_ident(device_t dev) -{ - struct amr_ident *id; - int sig; - - for (id = amr_device_ids; id->vendor != 0; id++) { - if ((pci_get_vendor(dev) == id->vendor) && - (pci_get_device(dev) == id->device)) { - /* do we need to test for a signature? */ - if (id->flags & AMR_ID_PROBE_SIG) { - sig = pci_read_config(dev, AMR_CFG_SIG, 2); - if ((sig != AMR_SIGNATURE_1) && (sig != AMR_SIGNATURE_2)) - continue; - } - return (id); - } - } - return (NULL); -} - -static int -amr_pci_probe(device_t dev) -{ - - debug_called(1); - - if (amr_find_ident(dev) != NULL) { - device_set_desc(dev, LSI_DESC_PCI); - return(BUS_PROBE_DEFAULT); - } - return(ENXIO); -} - -static int -amr_pci_attach(device_t dev) -{ - struct amr_softc *sc; - struct amr_ident *id; - int rid, rtype, error; - - debug_called(1); - - /* - * Initialise softc. - */ - sc = device_get_softc(dev); - bzero(sc, sizeof(*sc)); - sc->amr_dev = dev; - - /* assume failure is 'not configured' */ - error = ENXIO; - - /* - * Determine board type. - */ - if ((id = amr_find_ident(dev)) == NULL) - return (ENXIO); - - if (id->flags & AMR_ID_QUARTZ) { - sc->amr_type |= AMR_TYPE_QUARTZ; - } - - if ((amr_force_sg32 == 0) && (id->flags & AMR_ID_DO_SG64) && - (sizeof(vm_paddr_t) > 4)) { - device_printf(dev, "Using 64-bit DMA\n"); - sc->amr_type |= AMR_TYPE_SG64; - } - - /* force the busmaster enable bit on */ - pci_enable_busmaster(dev); - - /* - * Allocate the PCI register window. - */ - rid = PCIR_BAR(0); - rtype = AMR_IS_QUARTZ(sc) ? SYS_RES_MEMORY : SYS_RES_IOPORT; - sc->amr_reg = bus_alloc_resource_any(dev, rtype, &rid, RF_ACTIVE); - if (sc->amr_reg == NULL) { - device_printf(sc->amr_dev, "can't allocate register window\n"); - goto out; - } - sc->amr_btag = rman_get_bustag(sc->amr_reg); - sc->amr_bhandle = rman_get_bushandle(sc->amr_reg); - - /* - * Allocate and connect our interrupt. - */ - rid = 0; - sc->amr_irq = bus_alloc_resource_any(sc->amr_dev, SYS_RES_IRQ, &rid, - RF_SHAREABLE | RF_ACTIVE); - if (sc->amr_irq == NULL) { - device_printf(sc->amr_dev, "can't allocate interrupt\n"); - goto out; - } - if (bus_setup_intr(sc->amr_dev, sc->amr_irq, - INTR_TYPE_BIO | INTR_ENTROPY | INTR_MPSAFE, NULL, amr_pci_intr, - sc, &sc->amr_intr)) { - device_printf(sc->amr_dev, "can't set up interrupt\n"); - goto out; - } - - debug(2, "interrupt attached"); - - /* assume failure is 'out of memory' */ - error = ENOMEM; - - /* - * Allocate the parent bus DMA tag appropriate for PCI. - */ - if (bus_dma_tag_create(bus_get_dma_tag(dev), /* PCI parent */ - 1, 0, /* alignment,boundary */ - AMR_IS_SG64(sc) ? - BUS_SPACE_MAXADDR : - BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - BUS_SPACE_MAXSIZE, /* maxsize */ - BUS_SPACE_UNRESTRICTED, /* nsegments */ - BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ - 0, /* flags */ - NULL, NULL, /* lockfunc, lockarg */ - &sc->amr_parent_dmat)) { - device_printf(dev, "can't allocate parent DMA tag\n"); - goto out; - } - - /* - * Create DMA tag for mapping buffers into controller-addressable space. - */ - if (bus_dma_tag_create(sc->amr_parent_dmat, /* parent */ - 1, 0, /* alignment,boundary */ - BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - DFLTPHYS, /* maxsize */ - AMR_NSEG, /* nsegments */ - BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ - 0, /* flags */ - busdma_lock_mutex, /* lockfunc */ - &sc->amr_list_lock, /* lockarg */ - &sc->amr_buffer_dmat)) { - device_printf(sc->amr_dev, "can't allocate buffer DMA tag\n"); - goto out; - } - - if (bus_dma_tag_create(sc->amr_parent_dmat, /* parent */ - 1, 0, /* alignment,boundary */ - BUS_SPACE_MAXADDR, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - DFLTPHYS, /* maxsize */ - AMR_NSEG, /* nsegments */ - BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ - 0, /* flags */ - busdma_lock_mutex, /* lockfunc */ - &sc->amr_list_lock, /* lockarg */ - &sc->amr_buffer64_dmat)) { - device_printf(sc->amr_dev, "can't allocate buffer DMA tag\n"); - goto out; - } - - debug(2, "dma tag done"); - - /* - * Allocate and set up mailbox in a bus-visible fashion. - */ - mtx_init(&sc->amr_list_lock, "AMR List Lock", NULL, MTX_DEF); - mtx_init(&sc->amr_hw_lock, "AMR HW Lock", NULL, MTX_DEF); - if ((error = amr_setup_mbox(sc)) != 0) - goto out; - - debug(2, "mailbox setup"); - - /* - * Build the scatter/gather buffers. - */ - if ((error = amr_sglist_map(sc)) != 0) - goto out; - debug(2, "s/g list mapped"); - - if ((error = amr_ccb_map(sc)) != 0) - goto out; - debug(2, "ccb mapped"); - - /* - * Do bus-independant initialisation, bring controller online. - */ - error = amr_attach(sc); - -out: - if (error) - amr_pci_free(sc); - else - gone_in_dev(dev, 13, "amr(4) driver"); - return(error); -} - -/******************************************************************************** - * Disconnect from the controller completely, in preparation for unload. - */ -static int -amr_pci_detach(device_t dev) -{ - struct amr_softc *sc = device_get_softc(dev); - int error; - - debug_called(1); - - if (sc->amr_state & AMR_STATE_OPEN) - return(EBUSY); - - if ((error = amr_pci_shutdown(dev))) - return(error); - - amr_pci_free(sc); - - return(0); -} - -/******************************************************************************** - * Bring the controller down to a dormant state and detach all child devices. - * - * This function is called before detach, system shutdown, or before performing - * an operation which may add or delete system disks. (Call amr_startup to - * resume normal operation.) - * - * Note that we can assume that the bioq on the controller is empty, as we won't - * allow shutdown if any device is open. - */ -static int -amr_pci_shutdown(device_t dev) -{ - struct amr_softc *sc = device_get_softc(dev); - int i,error; - - debug_called(1); - - /* mark ourselves as in-shutdown */ - sc->amr_state |= AMR_STATE_SHUTDOWN; - - /* flush controller */ - device_printf(sc->amr_dev, "flushing cache..."); - printf("%s\n", amr_flush(sc) ? "failed" : "done"); - - error = 0; - - /* delete all our child devices */ - for(i = 0 ; i < AMR_MAXLD; i++) { - if( sc->amr_drive[i].al_disk != 0) { - if((error = device_delete_child(sc->amr_dev,sc->amr_drive[i].al_disk)) != 0) - goto shutdown_out; - sc->amr_drive[i].al_disk = 0; - } - } - - /* XXX disable interrupts? */ - -shutdown_out: - return(error); -} - -/******************************************************************************** - * Bring the controller to a quiescent state, ready for system suspend. - */ -static int -amr_pci_suspend(device_t dev) -{ - struct amr_softc *sc = device_get_softc(dev); - - debug_called(1); - - sc->amr_state |= AMR_STATE_SUSPEND; - - /* flush controller */ - device_printf(sc->amr_dev, "flushing cache..."); - printf("%s\n", amr_flush(sc) ? "failed" : "done"); - - /* XXX disable interrupts? */ - - return(0); -} - -/******************************************************************************** - * Bring the controller back to a state ready for operation. - */ -static int -amr_pci_resume(device_t dev) -{ - struct amr_softc *sc = device_get_softc(dev); - - debug_called(1); - - sc->amr_state &= ~AMR_STATE_SUSPEND; - - /* XXX enable interrupts? */ - - return(0); -} - -/******************************************************************************* - * Take an interrupt, or be poked by other code to look for interrupt-worthy - * status. - */ -static void -amr_pci_intr(void *arg) -{ - struct amr_softc *sc = (struct amr_softc *)arg; - - debug_called(3); - - /* collect finished commands, queue anything waiting */ - amr_done(sc); -} - -/******************************************************************************** - * Free all of the resources associated with (sc) - * - * Should not be called if the controller is active. - */ -static void -amr_pci_free(struct amr_softc *sc) -{ - void *p; - - debug_called(1); - - amr_free(sc); - - /* destroy data-transfer DMA tag */ - if (sc->amr_buffer_dmat) - bus_dma_tag_destroy(sc->amr_buffer_dmat); - if (sc->amr_buffer64_dmat) - bus_dma_tag_destroy(sc->amr_buffer64_dmat); - - /* free and destroy DMA memory and tag for passthrough pool */ - if (sc->amr_ccb) { - bus_dmamap_unload(sc->amr_ccb_dmat, sc->amr_ccb_dmamap); - bus_dmamem_free(sc->amr_ccb_dmat, sc->amr_ccb, sc->amr_ccb_dmamap); - } - if (sc->amr_ccb_dmat) - bus_dma_tag_destroy(sc->amr_ccb_dmat); - - /* free and destroy DMA memory and tag for s/g lists */ - if (sc->amr_sgtable) { - bus_dmamap_unload(sc->amr_sg_dmat, sc->amr_sg_dmamap); - bus_dmamem_free(sc->amr_sg_dmat, sc->amr_sgtable, sc->amr_sg_dmamap); - } - if (sc->amr_sg_dmat) - bus_dma_tag_destroy(sc->amr_sg_dmat); - - /* free and destroy DMA memory and tag for mailbox */ - p = (void *)(uintptr_t)(volatile void *)sc->amr_mailbox64; - if (sc->amr_mailbox) { - bus_dmamap_unload(sc->amr_mailbox_dmat, sc->amr_mailbox_dmamap); - bus_dmamem_free(sc->amr_mailbox_dmat, p, sc->amr_mailbox_dmamap); - } - if (sc->amr_mailbox_dmat) - bus_dma_tag_destroy(sc->amr_mailbox_dmat); - - /* disconnect the interrupt handler */ - if (sc->amr_intr) - bus_teardown_intr(sc->amr_dev, sc->amr_irq, sc->amr_intr); - if (sc->amr_irq != NULL) - bus_release_resource(sc->amr_dev, SYS_RES_IRQ, 0, sc->amr_irq); - - /* destroy the parent DMA tag */ - if (sc->amr_parent_dmat) - bus_dma_tag_destroy(sc->amr_parent_dmat); - - /* release the register window mapping */ - if (sc->amr_reg != NULL) - bus_release_resource(sc->amr_dev, - AMR_IS_QUARTZ(sc) ? SYS_RES_MEMORY : SYS_RES_IOPORT, - PCIR_BAR(0), sc->amr_reg); -} - -/******************************************************************************** - * Allocate and map the scatter/gather table in bus space. - */ -static void -amr_sglist_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error) -{ - uint32_t *addr; - - debug_called(1); - - addr = arg; - *addr = segs[0].ds_addr; -} - -static int -amr_sglist_map(struct amr_softc *sc) -{ - size_t segsize; - void *p; - int error; - - debug_called(1); - - /* - * Create a single tag describing a region large enough to hold all of - * the s/g lists we will need. - * - * Note that we could probably use AMR_LIMITCMD here, but that may become - * tunable. - */ - if (AMR_IS_SG64(sc)) - segsize = sizeof(struct amr_sg64entry) * AMR_NSEG * AMR_MAXCMD; - else - segsize = sizeof(struct amr_sgentry) * AMR_NSEG * AMR_MAXCMD; - - error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */ - 512, 0, /* alignment,boundary */ - BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - segsize, 1, /* maxsize, nsegments */ - BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ - 0, /* flags */ - NULL, NULL, /* lockfunc, lockarg */ - &sc->amr_sg_dmat); - if (error != 0) { - device_printf(sc->amr_dev, "can't allocate scatter/gather DMA tag\n"); - return(ENOMEM); - } - - /* - * Allocate enough s/g maps for all commands and permanently map them into - * controller-visible space. - * - * XXX this assumes we can get enough space for all the s/g maps in one - * contiguous slab. We may need to switch to a more complex arrangement - * where we allocate in smaller chunks and keep a lookup table from slot - * to bus address. - * - * XXX HACK ALERT: at least some controllers don't like the s/g memory - * being allocated below 0x2000. We leak some memory if - * we get some below this mark and allocate again. We - * should be able to avoid this with the tag setup, but - * that does't seem to work. - */ -retry: - error = bus_dmamem_alloc(sc->amr_sg_dmat, (void **)&p, BUS_DMA_NOWAIT, &sc->amr_sg_dmamap); - if (error) { - device_printf(sc->amr_dev, "can't allocate s/g table\n"); - return(ENOMEM); - } - bus_dmamap_load(sc->amr_sg_dmat, sc->amr_sg_dmamap, p, segsize, amr_sglist_helper, &sc->amr_sgbusaddr, 0); - if (sc->amr_sgbusaddr < 0x2000) { - debug(1, "s/g table too low (0x%x), reallocating\n", sc->amr_sgbusaddr); - goto retry; - } - - if (AMR_IS_SG64(sc)) - sc->amr_sg64table = (struct amr_sg64entry *)p; - sc->amr_sgtable = (struct amr_sgentry *)p; - - return(0); -} - -/******************************************************************************** - * Allocate and set up mailbox areas for the controller (sc) - * - * The basic mailbox structure should be 16-byte aligned. - */ -static int -amr_setup_mbox(struct amr_softc *sc) -{ - int error; - void *p; - uint32_t baddr; - - debug_called(1); - - /* - * Create a single tag describing a region large enough to hold the entire - * mailbox. - */ - error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */ - 16, 0, /* alignment,boundary */ - BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - sizeof(struct amr_mailbox64), /* maxsize */ - 1, /* nsegments */ - BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ - 0, /* flags */ - NULL, NULL, /* lockfunc, lockarg */ - &sc->amr_mailbox_dmat); - if (error != 0) { - device_printf(sc->amr_dev, "can't allocate mailbox tag\n"); - return(ENOMEM); - } - - /* - * Allocate the mailbox structure and permanently map it into - * controller-visible space. - */ - error = bus_dmamem_alloc(sc->amr_mailbox_dmat, (void **)&p, BUS_DMA_NOWAIT, - &sc->amr_mailbox_dmamap); - if (error) { - device_printf(sc->amr_dev, "can't allocate mailbox memory\n"); - return(ENOMEM); - } - bus_dmamap_load(sc->amr_mailbox_dmat, sc->amr_mailbox_dmamap, p, - sizeof(struct amr_mailbox64), amr_sglist_helper, &baddr, 0); - /* - * Conventional mailbox is inside the mailbox64 region. - */ - /* save physical base of the basic mailbox structure */ - sc->amr_mailboxphys = baddr + offsetof(struct amr_mailbox64, mb); - bzero(p, sizeof(struct amr_mailbox64)); - sc->amr_mailbox64 = (struct amr_mailbox64 *)p; - sc->amr_mailbox = &sc->amr_mailbox64->mb; - - return(0); -} - -static int -amr_ccb_map(struct amr_softc *sc) -{ - int ccbsize, error; - - /* - * Passthrough and Extended passthrough structures will share the same - * memory. - */ - ccbsize = sizeof(union amr_ccb) * AMR_MAXCMD; - error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */ - 128, 0, /* alignment,boundary */ - BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - ccbsize, /* maxsize */ - 1, /* nsegments */ - ccbsize, /* maxsegsize */ - 0, /* flags */ - NULL, NULL, /* lockfunc, lockarg */ - &sc->amr_ccb_dmat); - if (error != 0) { - device_printf(sc->amr_dev, "can't allocate ccb tag\n"); - return (ENOMEM); - } - - error = bus_dmamem_alloc(sc->amr_ccb_dmat, (void **)&sc->amr_ccb, - BUS_DMA_NOWAIT, &sc->amr_ccb_dmamap); - if (error) { - device_printf(sc->amr_dev, "can't allocate ccb memory\n"); - return (ENOMEM); - } - bus_dmamap_load(sc->amr_ccb_dmat, sc->amr_ccb_dmamap, sc->amr_ccb, - ccbsize, amr_sglist_helper, &sc->amr_ccb_busaddr, 0); - bzero(sc->amr_ccb, ccbsize); - - return (0); -} diff --git a/sys/dev/amr/amr_tables.h b/sys/dev/amr/amr_tables.h deleted file mode 100644 index 8cc114178a6d..000000000000 --- a/sys/dev/amr/amr_tables.h +++ /dev/null @@ -1,141 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause - * - * Copyright (c) 2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * - * $FreeBSD$ - */ - -/* - * Lookup table for code-to-text translations. - */ -struct amr_code_lookup { - char *string; - u_int32_t code; -}; - -extern char *amr_describe_code(struct amr_code_lookup *table, u_int32_t code); - -#ifndef AMR_DEFINE_TABLES -extern struct amr_code_lookup amr_table_qinit[]; -extern struct amr_code_lookup amr_table_sinit[]; -extern struct amr_code_lookup amr_table_drvstate[]; - -#else /* AMR_DEFINE_TABLES */ - -/******************************************************************************** - * Look up a text description of a numeric code and return a pointer to same. - */ -char * -amr_describe_code(struct amr_code_lookup *table, u_int32_t code) -{ - int i; - - for (i = 0; table[i].string != NULL; i++) - if (table[i].code == code) - return(table[i].string); - return(table[i+1].string); -} - -struct amr_code_lookup amr_table_qinit[] = { - {"init scanning drives", AMR_QINIT_SCAN}, - {"init scanning initialising", AMR_QINIT_SCANINIT}, - {"init firmware initing", AMR_QINIT_FIRMWARE}, - {"init in progress", AMR_QINIT_INPROG}, - {"init spinning drives", AMR_QINIT_SPINUP}, - {"insufficient memory", AMR_QINIT_NOMEM}, - {"init flushing cache", AMR_QINIT_CACHEFLUSH}, - {"init successfully done", AMR_QINIT_DONE}, - {NULL, 0}, - {"unknown init code", 0} -}; - -struct amr_code_lookup amr_table_sinit[] = { - {"init abnormal terminated", AMR_SINIT_ABEND}, - {"insufficient memory", AMR_SINIT_NOMEM}, - {"firmware flushing cache", AMR_SINIT_CACHEFLUSH}, - {"init in progress", AMR_SINIT_INPROG}, - {"firmware spinning drives", AMR_SINIT_SPINUP}, - {"init successfully done", AMR_SINIT_DONE}, - {NULL, 0}, - {"unknown init code", 0} -}; - -struct amr_code_lookup amr_table_drvstate[] = { - {"offline", AMR_DRV_OFFLINE}, - {"degraded", AMR_DRV_DEGRADED}, - {"optimal", AMR_DRV_OPTIMAL}, - {"online", AMR_DRV_ONLINE}, - {"failed", AMR_DRV_FAILED}, - {"rebuild", AMR_DRV_REBUILD}, - {"hot spare", AMR_DRV_HOTSPARE}, - {NULL, 0}, - {"unknown", 0} -}; - -struct amr_code_lookup amr_table_adaptertype[] = { - {"Series 431", AMR_SIG_431}, - {"Series 438", AMR_SIG_438}, - {"Series 762", AMR_SIG_762}, - {"Integrated HP NetRAID (T5)", AMR_SIG_T5}, - {"Series 466", AMR_SIG_466}, - {"Series 467", AMR_SIG_467}, - {"Integrated HP NetRAID (T7)", AMR_SIG_T7}, - {"Series 490", AMR_SIG_490}, - {NULL, 0}, - {"unknown adapter", 0} -}; - -#endif diff --git a/sys/dev/amr/amrio.h b/sys/dev/amr/amrio.h deleted file mode 100644 index c069555b7e18..000000000000 --- a/sys/dev/amr/amrio.h +++ /dev/null @@ -1,124 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause - * - * Copyright (c) 1999 Michael Smith - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * - * $FreeBSD$ - */ - -/* - * ioctl interface - */ - -#include -#include - -/* - * Fetch the driver's interface version. - */ -#define AMR_IO_VERSION_NUMBER 153 -#define AMR_IO_VERSION _IOR('A', 0x200, int) - -/* - * Pass a command from userspace through to the adapter. - * - * Note that in order to be code-compatible with the Linux - * interface where possible, the formatting of the au_cmd field is - * somewhat Interesting. - * - * For normal commands, the layout is (fields from struct amr_mailbox_ioctl): - * - * 0 mb_command - * 1 mb_channel - * 2 mb_param - * 3 mb_pad[0] - * 4 mb_drive - * - * For SCSI passthrough commands, the layout is: - * - * 0 AMR_CMD_PASS (0x3) - * 1 reserved, 0 - * 2 cdb length - * 3 cdb data - * 3+cdb_len passthrough control byte (timeout, ars, islogical) - * 4+cdb_len reserved, 0 - * 5+cdb_len channel - * 6+cdb_len target - */ - -struct amr_user_ioctl { - unsigned char au_cmd[32]; /* command text from userspace */ - void *au_buffer; /* data buffer in userspace */ - unsigned long au_length; /* data buffer size (0 == no data) */ - int au_direction; /* data transfer direction */ -#define AMR_IO_NODATA 0 -#define AMR_IO_READ 1 -#define AMR_IO_WRITE 2 - int au_status; /* command status returned by adapter */ -}; - -#define AMR_IO_COMMAND _IOWR('A', 0x201, struct amr_user_ioctl) - -#if defined(__amd64__) - -struct amr_user_ioctl32 { - unsigned char au_cmd[32]; /* command text from userspace */ - u_int32_t au_buffer; /* 32-bit pointer to uspace buf */ - u_int32_t au_length; /* length of the uspace buffer */ - int32_t au_direction; /* data transfer direction */ - int32_t au_status; /* command status returned by adapter */ -}; - -# define AMR_IO_COMMAND32 _IOWR('A', 0x201, struct amr_user_ioctl32) -#endif diff --git a/sys/dev/amr/amrreg.h b/sys/dev/amr/amrreg.h deleted file mode 100644 index 1ec6c5e56d6d..000000000000 --- a/sys/dev/amr/amrreg.h +++ /dev/null @@ -1,657 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause - * - * Copyright (c) 1999,2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * - * $FreeBSD$ - */ - -/******************************************************************************** - ******************************************************************************** - Driver parameters - ******************************************************************************** - ********************************************************************************/ - -/* - * We could actually use all 17 segments, but using only 16 means that - * each scatter/gather map is 128 bytes in size, and thus we don't have to worry about - * maps crossing page boundaries. - * - * The AMI documentation says that the limit is 26. Unfortunately, there's no way to - * cleanly fit more than 16 entries in without a page boundary. But is this a concern, - * since we allocate the s/g maps contiguously anyway? - */ -/* - * emoore - Oct 21, 2002 - * firmware doesn't have sglist boundary restrictions. - * The sgelem can be set to 26 - */ -#define AMR_NSEG 26 - -#define AMR_MAXCMD 255 /* ident = 0 not allowed */ -#define AMR_LIMITCMD 120 /* maximum count of outstanding commands */ -#define AMR_MAXLD 40 - -#define AMR_MAX_CHANNELS 8 -#define AMR_MAX_TARGETS 15 -#define AMR_MAX_LUNS 7 -#define AMR_MAX_SCSI_CMDS (15 * AMR_MAX_CHANNELS) /* one for every target? */ - -#define AMR_MAX_CDB_LEN 0x0a -#define AMR_MAX_EXTCDB_LEN 0x10 -#define AMR_MAX_REQ_SENSE_LEN 0x20 - -#define AMR_BLKSIZE 512 /* constant for all controllers */ - -/* - * Perform at-startup board initialisation. - * At this point in time, this code doesn't work correctly, so leave it disabled. - */ -/*#define AMR_BOARD_INIT*/ - -/******************************************************************************** - ******************************************************************************** - Interface Magic Numbers - ******************************************************************************** - ********************************************************************************/ - -/* - * Mailbox commands - */ -#define AMR_CMD_LREAD 0x01 -#define AMR_CMD_LWRITE 0x02 -#define AMR_CMD_PASS 0x03 -#define AMR_CMD_EXT_ENQUIRY 0x04 -#define AMR_CMD_ENQUIRY 0x05 -#define AMR_CMD_FLUSH 0x0a -#define AMR_CMD_EXT_ENQUIRY2 0x0c -#define AMR_CONFIG_PRODINFO 0x0e -#define AMR_CMD_GET_MACHINEID 0x36 -#define AMR_CMD_GET_INITIATOR 0x7d /* returns one byte */ -#define AMR_CMD_CONFIG 0xa1 -#define AMR_CMD_LREAD64 0xa7 -#define AMR_CMD_LWRITE64 0xa8 -#define AMR_CMD_PASS_64 0xc3 -#define AMR_CMD_EXTPASS 0xe3 - -#define AMR_CONFIG_READ_NVRAM_CONFIG 0x04 -#define AMR_CONFIG_WRITE_NVRAM_CONFIG 0x0d -#define AMR_CONFIG_PRODUCT_INFO 0x0e -#define AMR_CONFIG_ENQ3 0x0f -#define AMR_CONFIG_ENQ3_SOLICITED_NOTIFY 0x01 -#define AMR_CONFIG_ENQ3_SOLICITED_FULL 0x02 -#define AMR_CONFIG_ENQ3_UNSOLICITED 0x03 - -/* - * Command for random deletion of logical drives - */ -#define FC_DEL_LOGDRV 0xA4 -#define OP_SUP_DEL_LOGDRV 0x2A -#define OP_GET_LDID_MAP 0x18 -#define OP_DEL_LOGDRV 0x1C - -/* - * Command for random deletion of logical drives - */ -#define FC_DEL_LOGDRV 0xA4 -#define OP_SUP_DEL_LOGDRV 0x2A -#define OP_GET_LDID_MAP 0x18 -#define OP_DEL_LOGDRV 0x1C - -/* - * Command results - */ -#define AMR_STATUS_SUCCESS 0x00 -#define AMR_STATUS_ABORTED 0x02 -#define AMR_STATUS_FAILED 0x80 - -/* - * Physical/logical drive states - */ -#define AMR_DRV_CURSTATE(x) ((x) & 0x0f) -#define AMR_DRV_PREVSTATE(x) (((x) >> 4) & 0x0f) -#define AMR_DRV_OFFLINE 0x00 -#define AMR_DRV_DEGRADED 0x01 -#define AMR_DRV_OPTIMAL 0x02 -#define AMR_DRV_ONLINE 0x03 -#define AMR_DRV_FAILED 0x04 -#define AMR_DRV_REBUILD 0x05 -#define AMR_DRV_HOTSPARE 0x06 - -/* - * Logical drive properties - */ -#define AMR_DRV_RAID_MASK 0x0f /* RAID level 0, 1, 3, 5, etc. */ -#define AMR_DRV_WRITEBACK 0x10 /* write-back enabled */ -#define AMR_DRV_READHEAD 0x20 /* readhead policy enabled */ -#define AMR_DRV_ADAPTIVE 0x40 /* adaptive I/O policy enabled */ - -/* - * Battery status - */ -#define AMR_BATT_MODULE_MISSING 0x01 -#define AMR_BATT_LOW_VOLTAGE 0x02 -#define AMR_BATT_TEMP_HIGH 0x04 -#define AMR_BATT_PACK_MISSING 0x08 -#define AMR_BATT_CHARGE_MASK 0x30 -#define AMR_BATT_CHARGE_DONE 0x00 -#define AMR_BATT_CHARGE_INPROG 0x10 -#define AMR_BATT_CHARGE_FAIL 0x20 -#define AMR_BATT_CYCLES_EXCEEDED 0x40 - -/******************************************************************************** - ******************************************************************************** - 8LD Firmware Interface - ******************************************************************************** - ********************************************************************************/ - -/* - * Array constraints - */ -#define AMR_8LD_MAXDRIVES 8 -#define AMR_8LD_MAXCHAN 5 -#define AMR_8LD_MAXTARG 15 -#define AMR_8LD_MAXPHYSDRIVES (AMR_8LD_MAXCHAN * AMR_8LD_MAXTARG) - -/* - * Adapter Info structure - */ -struct amr_adapter_info -{ - u_int8_t aa_maxio; - u_int8_t aa_rebuild_rate; - u_int8_t aa_maxtargchan; - u_int8_t aa_channels; - u_int8_t aa_firmware[4]; - u_int16_t aa_flashage; - u_int8_t aa_chipsetvalue; - u_int8_t aa_memorysize; - u_int8_t aa_cacheflush; - u_int8_t aa_bios[4]; - u_int8_t aa_boardtype; - u_int8_t aa_scsisensealert; - u_int8_t aa_writeconfigcount; - u_int8_t aa_driveinsertioncount; - u_int8_t aa_inserteddrive; - u_int8_t aa_batterystatus; - u_int8_t res1; -} __packed; - -/* - * Logical Drive info structure - */ -struct amr_logdrive_info -{ - u_int8_t al_numdrives; - u_int8_t res1[3]; - u_int32_t al_size[AMR_8LD_MAXDRIVES]; - u_int8_t al_properties[AMR_8LD_MAXDRIVES]; - u_int8_t al_state[AMR_8LD_MAXDRIVES]; -} __packed; - -/* - * Physical Drive info structure - */ -struct amr_physdrive_info -{ - u_int8_t ap_state[AMR_8LD_MAXPHYSDRIVES]; /* low nibble current state, high nibble previous state */ - u_int8_t ap_predictivefailure; -} __packed; - -/* - * Enquiry response structure for AMR_CMD_ENQUIRY, AMR_CMD_EXT_ENQUIRY and - * AMR_CMD_EXT_ENQUIRY2. - * ENQUIRY EXT_ENQUIRY EXT_ENQUIRY2 - */ -struct amr_enquiry -{ - struct amr_adapter_info ae_adapter; /* X X X */ - struct amr_logdrive_info ae_ldrv; /* X X X */ - struct amr_physdrive_info ae_pdrv; /* X X X */ - u_int8_t ae_formatting[AMR_8LD_MAXDRIVES];/* X X */ - u_int8_t res1[AMR_8LD_MAXDRIVES]; /* X X */ - u_int32_t ae_extlen; /* X */ - u_int16_t ae_subsystem; /* X */ - u_int16_t ae_subvendor; /* X */ - u_int32_t ae_signature; /* X */ -#define AMR_SIG_431 0xfffe0001 -#define AMR_SIG_438 0xfffd0002 -#define AMR_SIG_762 0xfffc0003 -#define AMR_SIG_T5 0xfffb0004 -#define AMR_SIG_466 0xfffa0005 -#define AMR_SIG_467 0xfff90006 -#define AMR_SIG_T7 0xfff80007 -#define AMR_SIG_490 0xfff70008 - u_int8_t res2[844]; /* X */ -} __packed; - -/******************************************************************************** - ******************************************************************************** - 40LD Firmware Interface - ******************************************************************************** - ********************************************************************************/ - -/* - * Array constraints - */ -#define AMR_40LD_MAXDRIVES 40 -#define AMR_40LD_MAXCHAN 16 -#define AMR_40LD_MAXTARG 16 -#define AMR_40LD_MAXPHYSDRIVES 256 - -/* - * Product Info structure - */ -struct amr_prodinfo -{ - u_int32_t ap_size; /* current size in bytes (not including resvd) */ - u_int32_t ap_configsig; /* default is 0x00282008, indicating 0x28 maximum - * logical drives, 0x20 maximum stripes and 0x08 - * maximum spans */ - u_int8_t ap_firmware[16]; /* printable identifiers */ - u_int8_t ap_bios[16]; - u_int8_t ap_product[80]; - u_int8_t ap_maxio; /* maximum number of concurrent commands supported */ - u_int8_t ap_nschan; /* number of SCSI channels present */ - u_int8_t ap_fcloops; /* number of fibre loops present */ - u_int8_t ap_memtype; /* memory type */ - u_int32_t ap_signature; - u_int16_t ap_memsize; /* onboard memory in MB */ - u_int16_t ap_subsystem; /* subsystem identifier */ - u_int16_t ap_subvendor; /* subsystem vendor ID */ - u_int8_t ap_numnotifyctr; /* number of notify counters */ -} __packed; - -/* - * Notify structure - */ -struct amr_notify -{ - u_int32_t an_globalcounter; /* change counter */ - - u_int8_t an_paramcounter; /* parameter change counter */ - u_int8_t an_paramid; -#define AMR_PARAM_REBUILD_RATE 0x01 /* value = new rebuild rate */ -#define AMR_PARAM_FLUSH_INTERVAL 0x02 /* value = new flush interval */ -#define AMR_PARAM_SENSE_ALERT 0x03 /* value = last physical drive with check condition set */ -#define AMR_PARAM_DRIVE_INSERTED 0x04 /* value = last physical drive inserted */ -#define AMR_PARAM_BATTERY_STATUS 0x05 /* value = battery status */ - u_int16_t an_paramval; - - u_int8_t an_writeconfigcounter; /* write config occurred */ - u_int8_t res1[3]; - - u_int8_t an_ldrvopcounter; /* logical drive operation started/completed */ - u_int8_t an_ldrvopid; - u_int8_t an_ldrvopcmd; -#define AMR_LDRVOP_CHECK 0x01 -#define AMR_LDRVOP_INIT 0x02 -#define AMR_LDRVOP_REBUILD 0x03 - u_int8_t an_ldrvopstatus; -#define AMR_LDRVOP_SUCCESS 0x00 -#define AMR_LDRVOP_FAILED 0x01 -#define AMR_LDRVOP_ABORTED 0x02 -#define AMR_LDRVOP_CORRECTED 0x03 -#define AMR_LDRVOP_STARTED 0x04 - - u_int8_t an_ldrvstatecounter; /* logical drive state change occurred */ - u_int8_t an_ldrvstateid; - u_int8_t an_ldrvstatenew; - u_int8_t an_ldrvstateold; - - u_int8_t an_pdrvstatecounter; /* physical drive state change occurred */ - u_int8_t an_pdrvstateid; - u_int8_t an_pdrvstatenew; - u_int8_t an_pdrvstateold; - - u_int8_t an_pdrvfmtcounter; - u_int8_t an_pdrvfmtid; - u_int8_t an_pdrvfmtval; -#define AMR_FORMAT_START 0x01 -#define AMR_FORMAT_COMPLETE 0x02 - u_int8_t res2; - - u_int8_t an_targxfercounter; /* scsi xfer rate change */ - u_int8_t an_targxferid; - u_int8_t an_targxferval; - u_int8_t res3; - - u_int8_t an_fcloopidcounter; /* FC/AL loop ID changed */ - u_int8_t an_fcloopidpdrvid; - u_int8_t an_fcloopid0; - u_int8_t an_fcloopid1; - - u_int8_t an_fcloopstatecounter; /* FC/AL loop status changed */ - u_int8_t an_fcloopstate0; - u_int8_t an_fcloopstate1; - u_int8_t res4; -} __packed; - -/* - * Enquiry3 structure - */ -struct amr_enquiry3 -{ - u_int32_t ae_datasize; /* valid data size in this structure */ - union { /* event notify structure */ - struct amr_notify n; - u_int8_t pad[0x80]; - } ae_notify; - u_int8_t ae_rebuildrate; /* current rebuild rate in % */ - u_int8_t ae_cacheflush; /* flush interval in seconds */ - u_int8_t ae_sensealert; - u_int8_t ae_driveinsertcount; /* count of inserted drives */ - u_int8_t ae_batterystatus; - u_int8_t ae_numldrives; - u_int8_t ae_reconstate[AMR_40LD_MAXDRIVES / 8]; /* reconstruction state */ - u_int16_t ae_opstatus[AMR_40LD_MAXDRIVES / 8]; /* operation status per drive */ - u_int32_t ae_drivesize[AMR_40LD_MAXDRIVES]; /* logical drive size */ - u_int8_t ae_driveprop[AMR_40LD_MAXDRIVES]; /* logical drive properties */ - u_int8_t ae_drivestate[AMR_40LD_MAXDRIVES]; /* logical drive state */ - u_int8_t ae_pdrivestate[AMR_40LD_MAXPHYSDRIVES]; /* physical drive state */ - u_int16_t ae_pdriveformat[AMR_40LD_MAXPHYSDRIVES / 16]; - u_int8_t ae_targxfer[80]; /* physical drive transfer rates */ - - u_int8_t res1[263]; /* pad to 1024 bytes */ -} __packed; - -/******************************************************************************** - ******************************************************************************** - Mailbox and Command Structures - ******************************************************************************** - ********************************************************************************/ - -#define AMR_MBOX_CMDSIZE 0x10 /* portion worth copying for controller */ - -struct amr_mailbox -{ - u_int8_t mb_command; - u_int8_t mb_ident; - u_int16_t mb_blkcount; /* u_int8_t opcode */ - /* u_int8_t subopcode */ - u_int32_t mb_lba; - u_int32_t mb_physaddr; - u_int8_t mb_drive; - u_int8_t mb_nsgelem; /* u_int8_t rserv[0] */ - u_int8_t res1; /* u_int8_t rserv[1] */ - u_int8_t mb_busy; /* u_int8_t rserv[2] */ - u_int8_t mb_nstatus; - u_int8_t mb_status; - u_int8_t mb_completed[46]; - u_int8_t mb_poll; - u_int8_t mb_ack; - u_int8_t res2[16]; -} __packed; - -struct amr_mailbox64 -{ - u_int8_t pad[8]; /* Needed for alignment */ - u_int32_t sg64_lo; /* S/G pointer for 64-bit commands */ - u_int32_t sg64_hi; /* S/G pointer for 64-bit commands */ - struct amr_mailbox mb; -} __packed; - -struct amr_mailbox_ioctl -{ - u_int8_t mb_command; - u_int8_t mb_ident; - u_int8_t mb_channel; - u_int8_t mb_param; - u_int8_t mb_pad[4]; - u_int32_t mb_physaddr; - u_int8_t mb_drive; - u_int8_t mb_nsgelem; - u_int8_t res1; - u_int8_t mb_busy; - u_int8_t mb_nstatus; - u_int8_t mb_completed[46]; - u_int8_t mb_poll; - u_int8_t mb_ack; - u_int8_t res4[16]; -} __packed; - -struct amr_sgentry -{ - u_int32_t sg_addr; - u_int32_t sg_count; -} __packed; - -struct amr_sg64entry -{ - u_int64_t sg_addr; - u_int32_t sg_count; -} __packed; - -struct amr_passthrough -{ - u_int8_t ap_timeout:3; - u_int8_t ap_ars:1; - u_int8_t ap_dummy:3; - u_int8_t ap_islogical:1; - u_int8_t ap_logical_drive_no; - u_int8_t ap_channel; - u_int8_t ap_scsi_id; - u_int8_t ap_queue_tag; - u_int8_t ap_queue_action; - u_int8_t ap_cdb[AMR_MAX_CDB_LEN]; - u_int8_t ap_cdb_length; - u_int8_t ap_request_sense_length; - u_int8_t ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN]; - u_int8_t ap_no_sg_elements; - u_int8_t ap_scsi_status; - u_int32_t ap_data_transfer_address; - u_int32_t ap_data_transfer_length; -} __packed; - -struct amr_ext_passthrough -{ - u_int8_t ap_timeout:3; - u_int8_t ap_ars:1; - u_int8_t ap_rsvd1:1; - u_int8_t ap_cd_rom:1; - u_int8_t ap_rsvd2:1; - u_int8_t ap_islogical:1; - u_int8_t ap_logical_drive_no; - u_int8_t ap_channel; - u_int8_t ap_scsi_id; - u_int8_t ap_queue_tag; - u_int8_t ap_queue_action; - u_int8_t ap_cdb_length; - u_int8_t ap_rsvd3; - u_int8_t ap_cdb[AMR_MAX_EXTCDB_LEN]; - u_int8_t ap_no_sg_elements; - u_int8_t ap_scsi_status; - u_int8_t ap_request_sense_length; - u_int8_t ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN]; - u_int8_t ap_rsvd4; - u_int32_t ap_data_transfer_address; - u_int32_t ap_data_transfer_length; -} __packed; - -struct amr_linux_ioctl { - u_int32_t inlen; - u_int32_t outlen; - union { - u_int8_t fca[16]; - struct { - u_int8_t opcode; - u_int8_t subopcode; - u_int16_t adapno; - u_int32_t buffer; - u_int8_t pad[4]; - u_int32_t length; - } __packed fcs; - } __packed ui; - u_int8_t mbox[18]; - struct amr_passthrough pthru; - u_int32_t data; - u_int8_t pad[4]; -} __packed; - -#ifdef _KERNEL -/******************************************************************************** - ******************************************************************************** - "Quartz" i960 PCI bridge interface - ******************************************************************************** - ********************************************************************************/ - -#define AMR_CFG_SIG 0xa0 /* PCI config register for signature */ -#define AMR_SIGNATURE_1 0xCCCC /* i960 signature (older adapters) */ -#define AMR_SIGNATURE_2 0x3344 /* i960 signature (newer adapters) */ - -/* - * Doorbell registers - */ -#define AMR_QIDB 0x20 -#define AMR_QODB 0x2c -#define AMR_QIDB_SUBMIT 0x00000001 /* mailbox ready for work */ -#define AMR_QIDB_ACK 0x00000002 /* mailbox done */ -#define AMR_QODB_READY 0x10001234 /* work ready to be processed */ - -/* - * Initialisation status - */ -#define AMR_QINIT_SCAN 0x01 /* init scanning drives */ -#define AMR_QINIT_SCANINIT 0x02 /* init scanning initialising */ -#define AMR_QINIT_FIRMWARE 0x03 /* init firmware initing */ -#define AMR_QINIT_INPROG 0xdc /* init in progress */ -#define AMR_QINIT_SPINUP 0x2c /* init spinning drives */ -#define AMR_QINIT_NOMEM 0xac /* insufficient memory */ -#define AMR_QINIT_CACHEFLUSH 0xbc /* init flushing cache */ -#define AMR_QINIT_DONE 0x9c /* init successfully done */ - -/* - * I/O primitives - */ -#define AMR_QPUT_IDB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QIDB, val) -#define AMR_QGET_IDB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QIDB) -#define AMR_QPUT_ODB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QODB, val) -#define AMR_QGET_ODB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QODB) - -#ifdef AMR_BOARD_INIT -#define AMR_QRESET(sc) \ - do { \ - pci_write_config((sc)->amr_dev, 0x40, pci_read_config((sc)->amr_dev, 0x40, 1) | 0x20, 1); \ - pci_write_config((sc)->amr_dev, 0x64, 0x1122, 1); \ - } while (0) -#define AMR_QGET_INITSTATUS(sc) pci_read_config((sc)->amr_dev, 0x9c, 1) -#define AMR_QGET_INITCHAN(sc) pci_read_config((sc)->amr_dev, 0x9f, 1) -#define AMR_QGET_INITTARG(sc) pci_read_config((sc)->amr_dev, 0x9e, 1) -#endif - -/******************************************************************************** - ******************************************************************************** - "Standard" old-style ASIC bridge interface - ******************************************************************************** - ********************************************************************************/ - -/* - * I/O registers - */ -#define AMR_SCMD 0x10 /* command/ack register (write) */ -#define AMR_SMBOX_BUSY 0x10 /* mailbox status (read) */ -#define AMR_STOGGLE 0x11 /* interrupt enable bit here */ -#define AMR_SMBOX_0 0x14 /* mailbox physical address low byte */ -#define AMR_SMBOX_1 0x15 -#define AMR_SMBOX_2 0x16 -#define AMR_SMBOX_3 0x17 /* high byte */ -#define AMR_SMBOX_ENABLE 0x18 /* atomic mailbox address enable */ -#define AMR_SINTR 0x1a /* interrupt status */ - -/* - * I/O magic numbers - */ -#define AMR_SCMD_POST 0x10 /* -> SCMD to initiate action on mailbox */ -#define AMR_SCMD_ACKINTR 0x08 /* -> SCMD to ack mailbox retrieved */ -#define AMR_STOGL_IENABLE 0xc0 /* in STOGGLE */ -#define AMR_SINTR_VALID 0x40 /* in SINTR */ -#define AMR_SMBOX_BUSYFLAG 0x10 /* in SMBOX_BUSY */ -#define AMR_SMBOX_ADDR 0x00 /* -> SMBOX_ENABLE */ - -/* - * Initialisation status - */ -#define AMR_SINIT_ABEND 0xee /* init abnormal terminated */ -#define AMR_SINIT_NOMEM 0xca /* insufficient memory */ -#define AMR_SINIT_CACHEFLUSH 0xbb /* firmware flushing cache */ -#define AMR_SINIT_INPROG 0x11 /* init in progress */ -#define AMR_SINIT_SPINUP 0x22 /* firmware spinning drives */ -#define AMR_SINIT_DONE 0x99 /* init successfully done */ - -/* - * I/O primitives - */ -#define AMR_SPUT_ISTAT(sc, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SINTR, val) -#define AMR_SGET_ISTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SINTR) -#define AMR_SACK_INTERRUPT(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_ACKINTR) -#define AMR_SPOST_COMMAND(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_POST) -#define AMR_SGET_MBSTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_BUSY) -#define AMR_SENABLE_INTR(sc) \ - bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \ - bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) | AMR_STOGL_IENABLE) -#define AMR_SDISABLE_INTR(sc) \ - bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \ - bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) & ~AMR_STOGL_IENABLE) -#define AMR_SBYTE_SET(sc, reg, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, reg, val) - -#ifdef AMR_BOARD_INIT -#define AMR_SRESET(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, 0, 0x80) -#define AMR_SGET_INITSTATUS(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE) -#define AMR_SGET_FAILDRIVE(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 1) -#define AMR_SGET_INITCHAN(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 2) -#define AMR_SGET_INITTARG(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 3) -#endif - -#endif /* _KERNEL */ diff --git a/sys/dev/amr/amrvar.h b/sys/dev/amr/amrvar.h deleted file mode 100644 index ae1a4acbc892..000000000000 --- a/sys/dev/amr/amrvar.h +++ /dev/null @@ -1,384 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause - * - * Copyright (c) 1999,2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright (c) 2002 Eric Moore - * Copyright (c) 2002 LSI Logic Corporation - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The party using or redistributing the source code and binary forms - * agrees to the disclaimer below and the terms and conditions set forth - * herein. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * - * $FreeBSD$ - */ - -#include -#include -#include - -#define LSI_DESC_PCI "LSILogic MegaRAID 1.53" - -#ifdef AMR_DEBUG -# define debug(level, fmt, args...) do {if (level <= AMR_DEBUG) printf("%s: " fmt "\n", __func__ , ##args);} while(0) -# define debug_called(level) do {if (level <= AMR_DEBUG) printf("%s: called\n", __func__);} while(0) -#else -# define debug(level, fmt, args...) do {} while (0) -# define debug_called(level) do {} while (0) -#endif -#define xdebug(fmt, args...) printf("%s: " fmt "\n", __func__ , ##args) - -/* - * Per-logical-drive datastructure - */ -struct amr_logdrive -{ - u_int32_t al_size; - int al_state; - int al_properties; - - /* synthetic geometry */ - int al_cylinders; - int al_heads; - int al_sectors; - - /* driver */ - device_t al_disk; -}; - -/* - * Due to the difficulty of using the zone allocator to create a new - * zone from within a module, we use our own clustering to reduce - * memory wastage due to allocating lots of these small structures. - * - * 16k gives us a little under 200 command structures, which should - * normally be plenty. We will grab more if we need them. - */ - -#define AMR_CMD_CLUSTERSIZE (16 * 1024) - -typedef STAILQ_HEAD(, amr_command) ac_qhead_t; -typedef STAILQ_ENTRY(amr_command) ac_link_t; - -union amr_ccb { - struct amr_passthrough ccb_pthru; - struct amr_ext_passthrough ccb_epthru; - uint8_t bytes[128]; -}; - -/* - * Per-command control structure. - */ -struct amr_command -{ - ac_link_t ac_link; - - struct amr_softc *ac_sc; - u_int8_t ac_slot; - int ac_status; /* command completion status */ - union { - struct amr_sgentry *sg32; - struct amr_sg64entry *sg64; - } ac_sg; - u_int32_t ac_sgbusaddr; - u_int32_t ac_sg64_lo; - u_int32_t ac_sg64_hi; - struct amr_mailbox ac_mailbox; - int ac_flags; -#define AMR_CMD_DATAIN (1<<0) -#define AMR_CMD_DATAOUT (1<<1) -#define AMR_CMD_CCB (1<<2) -#define AMR_CMD_PRIORITY (1<<4) -#define AMR_CMD_MAPPED (1<<5) -#define AMR_CMD_SLEEP (1<<6) -#define AMR_CMD_BUSY (1<<7) -#define AMR_CMD_SG64 (1<<8) -#define AC_IS_SG64(ac) ((ac)->ac_flags & AMR_CMD_SG64) - u_int ac_retries; - - struct bio *ac_bio; - void (* ac_complete)(struct amr_command *ac); - void *ac_private; - - void *ac_data; - size_t ac_length; - bus_dmamap_t ac_dmamap; - bus_dmamap_t ac_dma64map; - - bus_dma_tag_t ac_tag; - bus_dmamap_t ac_datamap; - int ac_nsegments; - uint32_t ac_mb_physaddr; - - union amr_ccb *ac_ccb; - uint32_t ac_ccb_busaddr; -}; - -struct amr_command_cluster -{ - TAILQ_ENTRY(amr_command_cluster) acc_link; - struct amr_command acc_command[0]; -}; - -#define AMR_CMD_CLUSTERCOUNT ((AMR_CMD_CLUSTERSIZE - sizeof(struct amr_command_cluster)) / \ - sizeof(struct amr_command)) - -/* - * Per-controller-instance data - */ -struct amr_softc -{ - /* bus attachments */ - device_t amr_dev; - struct resource *amr_reg; /* control registers */ - bus_space_handle_t amr_bhandle; - bus_space_tag_t amr_btag; - bus_dma_tag_t amr_parent_dmat; /* parent DMA tag */ - bus_dma_tag_t amr_buffer_dmat; /* data buffer DMA tag */ - bus_dma_tag_t amr_buffer64_dmat; - struct resource *amr_irq; /* interrupt */ - void *amr_intr; - - /* mailbox */ - volatile struct amr_mailbox *amr_mailbox; - volatile struct amr_mailbox64 *amr_mailbox64; - u_int32_t amr_mailboxphys; - bus_dma_tag_t amr_mailbox_dmat; - bus_dmamap_t amr_mailbox_dmamap; - - /* scatter/gather lists and their controller-visible mappings */ - struct amr_sgentry *amr_sgtable; /* s/g lists */ - struct amr_sg64entry *amr_sg64table; /* 64bit s/g lists */ - u_int32_t amr_sgbusaddr; /* s/g table base address in bus space */ - bus_dma_tag_t amr_sg_dmat; /* s/g buffer DMA tag */ - bus_dmamap_t amr_sg_dmamap; /* map for s/g buffers */ - - union amr_ccb *amr_ccb; - uint32_t amr_ccb_busaddr; - bus_dma_tag_t amr_ccb_dmat; - bus_dmamap_t amr_ccb_dmamap; - - /* controller limits and features */ - int amr_nextslot; /* Next slot to use for newly allocated commands */ - int amr_maxio; /* maximum number of I/O transactions */ - int amr_maxdrives; /* max number of logical drives */ - int amr_maxchan; /* count of SCSI channels */ - - /* connected logical drives */ - struct amr_logdrive amr_drive[AMR_MAXLD]; - - /* controller state */ - int amr_state; -#define AMR_STATE_OPEN (1<<0) -#define AMR_STATE_SUSPEND (1<<1) -#define AMR_STATE_INTEN (1<<2) -#define AMR_STATE_SHUTDOWN (1<<3) -#define AMR_STATE_CRASHDUMP (1<<4) -#define AMR_STATE_QUEUE_FRZN (1<<5) -#define AMR_STATE_LD_DELETE (1<<6) -#define AMR_STATE_REMAP_LD (1<<7) - - /* per-controller queues */ - struct bio_queue_head amr_bioq; /* pending I/O with no commands */ - ac_qhead_t amr_ready; /* commands ready to be submitted */ - struct amr_command *amr_busycmd[AMR_MAXCMD]; - int amr_busyslots; - ac_qhead_t amr_freecmds; - TAILQ_HEAD(,amr_command_cluster) amr_cmd_clusters; - - /* CAM attachments for passthrough */ - struct cam_sim *amr_cam_sim[AMR_MAX_CHANNELS]; - TAILQ_HEAD(, ccb_hdr) amr_cam_ccbq; - struct cam_devq *amr_cam_devq; - - /* control device */ - struct cdev *amr_dev_t; - struct mtx amr_list_lock; - - /* controller type-specific support */ - int amr_type; -#define AMR_TYPE_QUARTZ (1<<0) -#define AMR_IS_QUARTZ(sc) ((sc)->amr_type & AMR_TYPE_QUARTZ) -#define AMR_TYPE_40LD (1<<1) -#define AMR_IS_40LD(sc) ((sc)->amr_type & AMR_TYPE_40LD) -#define AMR_TYPE_SG64 (1<<2) -#define AMR_IS_SG64(sc) ((sc)->amr_type & AMR_TYPE_SG64) - int (* amr_submit_command)(struct amr_command *ac); - int (* amr_get_work)(struct amr_softc *sc, struct amr_mailbox *mbsave); - int (*amr_poll_command)(struct amr_command *ac); - int (*amr_poll_command1)(struct amr_softc *sc, struct amr_command *ac); - int support_ext_cdb; /* greater than 10 byte cdb support */ - - /* misc glue */ - device_t amr_pass; - int (*amr_cam_command)(struct amr_softc *sc, struct amr_command **acp); - struct intr_config_hook amr_ich; /* wait-for-interrupts probe hook */ - int amr_allow_vol_config; - int amr_linux_no_adapters; - int amr_ld_del_supported; - struct mtx amr_hw_lock; -}; - -/* - * Interface between bus connections and driver core. - */ -extern int amr_attach(struct amr_softc *sc); -extern void amr_free(struct amr_softc *sc); -extern int amr_flush(struct amr_softc *sc); -extern int amr_done(struct amr_softc *sc); -extern void amr_startio(struct amr_softc *sc); - -/* - * Command buffer allocation. - */ -extern struct amr_command *amr_alloccmd(struct amr_softc *sc); -extern void amr_releasecmd(struct amr_command *ac); - -/* - * MegaRAID logical disk driver - */ -struct amrd_softc -{ - device_t amrd_dev; - struct amr_softc *amrd_controller; - struct amr_logdrive *amrd_drive; - struct disk *amrd_disk; - int amrd_unit; -}; - -/* - * Interface between driver core and disk driver (should be using a bus?) - */ -extern int amr_submit_bio(struct amr_softc *sc, struct bio *bio); -extern int amr_dump_blocks(struct amr_softc *sc, int unit, u_int32_t lba, void *data, int blks); -extern void amrd_intr(void *data); - -/******************************************************************************** - * Enqueue/dequeue functions - */ -static __inline void -amr_enqueue_bio(struct amr_softc *sc, struct bio *bio) -{ - - bioq_insert_tail(&sc->amr_bioq, bio); -} - -static __inline struct bio * -amr_dequeue_bio(struct amr_softc *sc) -{ - struct bio *bio; - - if ((bio = bioq_first(&sc->amr_bioq)) != NULL) - bioq_remove(&sc->amr_bioq, bio); - return(bio); -} - -static __inline void -amr_init_qhead(ac_qhead_t *head) -{ - - STAILQ_INIT(head); -} - -static __inline void -amr_enqueue_ready(struct amr_command *ac) -{ - - STAILQ_INSERT_TAIL(&ac->ac_sc->amr_ready, ac, ac_link); -} - -static __inline void -amr_requeue_ready(struct amr_command *ac) -{ - - STAILQ_INSERT_HEAD(&ac->ac_sc->amr_ready, ac, ac_link); -} - -static __inline struct amr_command * -amr_dequeue_ready(struct amr_softc *sc) -{ - struct amr_command *ac; - - if ((ac = STAILQ_FIRST(&sc->amr_ready)) != NULL) - STAILQ_REMOVE_HEAD(&sc->amr_ready, ac_link); - return(ac); -} - -static __inline void -amr_enqueue_completed(struct amr_command *ac, ac_qhead_t *head) -{ - - STAILQ_INSERT_TAIL(head, ac, ac_link); -} - -static __inline struct amr_command * -amr_dequeue_completed(struct amr_softc *sc, ac_qhead_t *head) -{ - struct amr_command *ac; - - if ((ac = STAILQ_FIRST(head)) != NULL) - STAILQ_REMOVE_HEAD(head, ac_link); - return(ac); -} - -static __inline void -amr_enqueue_free(struct amr_command *ac) -{ - - STAILQ_INSERT_HEAD(&ac->ac_sc->amr_freecmds, ac, ac_link); -} - -static __inline struct amr_command * -amr_dequeue_free(struct amr_softc *sc) -{ - struct amr_command *ac; - - if ((ac = STAILQ_FIRST(&sc->amr_freecmds)) != NULL) - STAILQ_REMOVE_HEAD(&sc->amr_freecmds, ac_link); - return(ac); -} diff --git a/sys/i386/conf/GENERIC b/sys/i386/conf/GENERIC index b82193b6eb59..b97036f324cd 100644 --- a/sys/i386/conf/GENERIC +++ b/sys/i386/conf/GENERIC @@ -1,362 +1,361 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options ROUTE_MPATH # Multipath routing support options TCP_HHOOK # hhook(9) framework for TCP options TCP_OFFLOAD # TCP offload options SCTP_SUPPORT # Allow kldload of SCTP options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_RAID # Soft RAID functionality. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options COMPAT_FREEBSD12 # Compatible with FreeBSD12 options COMPAT_FREEBSD13 # Compatible with FreeBSD13 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options DDB # Support DDB. options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options DEBUGNET # debugnet networking options NETDUMP # netdump(4) client support options NETGDB # netgdb(4) client support # To make an SMP kernel, the next two lines are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC options EARLY_AP_STARTUP # CPU frequency control device cpufreq # Bus support. device acpi device smbios device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support # Floppy drives device fdc # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI-Logic MPT-Fusion 3 device sym # NCR/Symbios Logic device isci # Intel C600 SAS controller device pvscsi # VMware PVSCSI # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # RAID controllers interfaced to the SCSI subsystem -device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device ciss # Compaq Smart RAID 5* device ips # IBM (Adaptec) ServeRAID device twa # 3ware 9000 series PATA/SATA RAID device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device aacraid # Adaptec by PMC RAID device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device pmspcv # PMC-Sierra SAS/SATA Controller driver device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespace as disks, depends on nvme # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver options VESA # Add support for VESA BIOS Extensions (VBE) device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options SC_PIXEL_MODE # add support for the raster text mode # vt is the new video console driver device vt device vt_vga device vt_vbefb device agp # support several AGP chipsets # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da device puc # Multi I/O cards and multi-channel UARTs # PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure device iflib device igc # Intel I225 2.5G Ethernet device em # Intel PRO/1000 Gigabit Ethernet Family device vmx # VMware VMXNET3 Ethernet # PCI Ethernet NICs. device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) device gem # Sun GEM/Sun ERI/Apple GMAC device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nfe # nVidia nForce MCP on-board Ethernet device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later device ath_rate_sample # SampleRate tx rate control for ath #device bwi # Broadcom BCM430x/BCM431x wireless NICs. #device bwn # Broadcom BCM43xx wireless NICs. device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device ral # Ralink Technology RT2500 wireless NICs. device wpi # Intel 3945ABG wireless NICs. # Pseudo devices. device crypto # core crypto support device aesni # AES-NI OpenCrypto module device loop # Network loopback device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device ether # Ethernet support device vlan # 802.1Q VLAN support device tuntap # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device xhci # XHCI PCI->USB interface (USB 3.0) device usb # USB Bus (required) device ukbd # Keyboard device umass # Disks/Mass storage - Requires scbus and da # Sound support device sound # Generic sound driver (required) device snd_cmi # CMedia CMI8338/CMI8738 device snd_csa # Crystal Semiconductor CS461x/428x device snd_emu10kx # Creative SoundBlaster Live! and Audigy device snd_es137x # Ensoniq AudioPCI ES137x device snd_hda # Intel High Definition Audio device snd_ich # Intel, NVidia and other ICH AC'97 Audio device snd_via8233 # VIA VT8233x Audio # MMC/SD device mmc # MMC/SD bus device mmcsd # MMC/SD memory card device sdhci # Generic PCI SD Host Controller device rtsx # Realtek SD card reader # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # HyperV drivers and enhancement support # NOTE: HYPERV depends on hyperv. They must be added or removed together. options HYPERV # Kernel support for HyperV drivers device hyperv # HyperV drivers # Xen HVM Guest Optimizations # NOTE: XENHVM and xenpci interdepend. They must be added or removed # together. xentimer depends on XENHVM and isn't required. options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver device xentimer # Xen x86 PV timer device # evdev interface options EVDEV_SUPPORT # evdev support in legacy drivers device evdev # input event device support device uinput # install /dev/uinput cdev # HID support options HID_DEBUG # enable debug msgs device hid # Generic HID support options IICHID_SAMPLING # Workaround missing GPIO INTR support diff --git a/sys/modules/Makefile b/sys/modules/Makefile index f34bc403f86e..594c837168bf 100644 --- a/sys/modules/Makefile +++ b/sys/modules/Makefile @@ -1,841 +1,840 @@ # $FreeBSD$ SYSDIR?=${SRCTOP}/sys .include "${SYSDIR}/conf/kern.opts.mk" SUBDIR_PARALLEL= # Modules that include binary-only blobs of microcode should be selectable by # MK_SOURCELESS_UCODE option (see below). .include "${SYSDIR}/conf/config.mk" .if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES) SUBDIR=${MODULES_OVERRIDE} .else SUBDIR= \ ${_3dfx} \ ${_3dfx_linux} \ ${_aac} \ ${_aacraid} \ accf_data \ accf_dns \ accf_http \ acl_nfs4 \ acl_posix1e \ ${_acpi} \ ae \ ${_aesni} \ age \ ${_agp} \ ahci \ aic7xxx \ alc \ ale \ alq \ ${_amd_ecc_inject} \ ${_amdgpio} \ ${_amdsbwd} \ ${_amdsmn} \ ${_amdtemp} \ - amr \ ${_aout} \ ${_arcmsr} \ ${_allwinner} \ ${_armv8crypto} \ ${_asmc} \ ata \ ath \ ath_dfs \ ath_hal \ ath_hal_ar5210 \ ath_hal_ar5211 \ ath_hal_ar5212 \ ath_hal_ar5416 \ ath_hal_ar9300 \ ath_main \ ath_rate \ ath_pci \ ${_autofs} \ axgbe \ backlight \ ${_bce} \ ${_bcm283x_clkman} \ ${_bcm283x_pwm} \ bfe \ bge \ bhnd \ ${_bxe} \ ${_bios} \ ${_blake2} \ bnxt \ bridgestp \ bwi \ bwn \ ${_bytgpio} \ ${_chvgpio} \ cam \ ${_cardbus} \ ${_carp} \ cas \ ${_cbb} \ cc \ ${_ccp} \ cd9660 \ cd9660_iconv \ ${_ce} \ ${_cfi} \ ${_chromebook_platform} \ ${_ciss} \ ${_coretemp} \ ${_cp} \ ${_cpsw} \ ${_cpuctl} \ ${_cpufreq} \ ${_crypto} \ ${_cryptodev} \ ctl \ ${_cxgb} \ ${_cxgbe} \ dc \ dcons \ dcons_crom \ ${_dpdk_lpm4} \ ${_dpdk_lpm6} \ ${_dpms} \ dummynet \ ${_dwwdt} \ ${_e6000sw} \ ${_efirt} \ ${_em} \ ${_ena} \ ${_enetc} \ esp \ ${_et} \ evdev \ ${_exca} \ ext2fs \ fdc \ fdescfs \ ${_felix} \ ${_ffec} \ ${_fib_dxr} \ filemon \ firewire \ firmware \ ${_ftwd} \ fusefs \ ${_fxp} \ gem \ geom \ ${_glxiic} \ ${_glxsb} \ gpio \ hid \ hifn \ ${_hpt27xx} \ ${_hptiop} \ ${_hptmv} \ ${_hptnr} \ ${_hptrr} \ hwpmc \ ${_hwpmc_mips24k} \ ${_hwpmc_mips74k} \ ${_hyperv} \ i2c \ ${_iavf} \ ${_ibcore} \ ${_ichwd} \ ${_ice} \ ${_ice_ddp} \ ${_ida} \ if_bridge \ if_disc \ if_edsc \ ${_if_enc} \ if_epair \ ${_if_gif} \ ${_if_gre} \ ${_if_me} \ if_infiniband \ if_lagg \ ${_if_stf} \ if_tuntap \ if_vlan \ if_vxlan \ iflib \ ${_igc} \ imgact_binmisc \ ${_intelspi} \ ${_io} \ ${_ioat} \ ${_ipoib} \ ${_ipdivert} \ ${_ipfilter} \ ${_ipfw} \ ipfw_nat \ ${_ipfw_nat64} \ ${_ipfw_nptv6} \ ${_ipfw_pmod} \ ${_ipmi} \ ip6_mroute_mod \ ip_mroute_mod \ ${_ips} \ ${_ipsec} \ ${_ipw} \ ${_ipwfw} \ ${_isci} \ ${_iser} \ isp \ ${_ispfw} \ ${_itwd} \ ${_iwi} \ ${_iwifw} \ ${_iwm} \ ${_iwmfw} \ ${_iwn} \ ${_iwnfw} \ ${_ix} \ ${_ixv} \ ${_ixl} \ jme \ kbdmux \ kgssapi \ kgssapi_krb5 \ khelp \ krpc \ ksyms \ le \ lge \ libalias \ libiconv \ libmchain \ lindebugfs \ linuxkpi \ ${_lio} \ lpt \ mac_biba \ mac_bsdextended \ mac_ifoff \ mac_lomac \ mac_mls \ mac_none \ mac_ntpd \ mac_partition \ mac_portacl \ mac_seeotheruids \ mac_stub \ mac_test \ ${_malo} \ ${_mana} \ md \ mdio \ ${_mgb} \ mem \ mfi \ mii \ mlx \ mlxfw \ ${_mlx4} \ ${_mlx4ib} \ ${_mlx4en} \ ${_mlx5} \ ${_mlx5en} \ ${_mlx5ib} \ mmc \ mmcsd \ ${_mpr} \ ${_mps} \ mpt \ mqueue \ mrsas \ msdosfs \ msdosfs_iconv \ msk \ ${_mthca} \ mvs \ mwl \ ${_mwlfw} \ mxge \ my \ ${_nctgpio} \ ${_neta} \ ${_netgraph} \ ${_nfe} \ nfscl \ nfscommon \ nfsd \ nfslockd \ nfssvc \ nge \ nmdm \ nullfs \ ${_ntb} \ ${_nvd} \ ${_nvdimm} \ ${_nvme} \ ${_nvram} \ oce \ ${_ocs_fc} \ ${_ossl} \ otus \ ${_otusfw} \ ow \ ${_padlock} \ ${_padlock_rng} \ ${_pchtherm} \ ${_pcfclock} \ ${_pf} \ ${_pflog} \ ${_pfsync} \ plip \ ${_pms} \ ppbus \ ppc \ ppi \ pps \ procfs \ proto \ pseudofs \ ${_pst} \ pty \ puc \ pwm \ ${_qat} \ ${_qatfw} \ ${_qlxge} \ ${_qlxgb} \ ${_qlxgbe} \ ${_qlnx} \ ral \ ${_ralfw} \ ${_random_fortuna} \ ${_random_other} \ rc4 \ ${_rdma} \ ${_rdrand_rng} \ re \ rl \ ${_rockchip} \ rtsx \ rtwn \ rtwn_pci \ rtwn_usb \ ${_rtwnfw} \ ${_s3} \ ${_safe} \ safexcel \ ${_sbni} \ scc \ ${_sctp} \ sdhci \ ${_sdhci_acpi} \ ${_sdhci_fdt} \ sdhci_pci \ sdio \ sem \ send \ ${_sfxge} \ sge \ ${_sgx} \ ${_sgx_linux} \ siftr \ siis \ sis \ sk \ ${_smartpqi} \ smbfs \ snp \ sound \ ${_speaker} \ spi \ ${_splash} \ ste \ stge \ ${_sume} \ ${_superio} \ ${_p2sb} \ ${_sym} \ ${_syscons} \ sysvipc \ tcp \ ${_ti} \ tmpfs \ ${_toecore} \ ${_tpm} \ ${_twa} \ twe \ tws \ uart \ udf \ udf_iconv \ ufs \ uinput \ unionfs \ usb \ ${_vesa} \ virtio \ vge \ ${_viawd} \ videomode \ vkbd \ ${_vmd} \ ${_vmm} \ ${_vmware} \ vr \ vte \ ${_wbwd} \ wlan \ wlan_acl \ wlan_amrr \ wlan_ccmp \ wlan_rssadapt \ wlan_tkip \ wlan_wep \ wlan_xauth \ ${_wpi} \ ${_wpifw} \ ${_x86bios} \ xdr \ xl \ xz \ zlib .if ${MK_AUTOFS} != "no" || defined(ALL_MODULES) _autofs= autofs .endif .if ${MK_CDDL} != "no" || defined(ALL_MODULES) .if (${MACHINE_CPUARCH} != "arm" || ${MACHINE_ARCH:Marmv[67]*} != "") && \ ${MACHINE_CPUARCH} != "mips" .if ${KERN_OPTS:MKDTRACE_HOOKS} SUBDIR+= dtrace .endif .endif SUBDIR+= opensolaris .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${SRCTOP}/sys/opencrypto) _crypto= crypto _cryptodev= cryptodev _random_fortuna=random_fortuna _random_other= random_other .endif .endif .if ${MK_CUSE} != "no" || defined(ALL_MODULES) SUBDIR+= cuse .endif .if ${MK_EFI} != "no" .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" _efirt= efirt .endif .endif .if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _carp= carp _toecore= toecore _if_enc= if_enc _if_gif= if_gif _if_gre= if_gre _ipfw_pmod= ipfw_pmod .if ${KERN_OPTS:MIPSEC_SUPPORT} && !${KERN_OPTS:MIPSEC} _ipsec= ipsec .endif .if ${KERN_OPTS:MSCTP_SUPPORT} || ${KERN_OPTS:MSCTP} _sctp= sctp .endif .endif .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _if_stf= if_stf .endif .if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES) _if_me= if_me _ipdivert= ipdivert _ipfw= ipfw .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nat64= ipfw_nat64 .endif .endif .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nptv6= ipfw_nptv6 .endif .if ${MK_IPFILTER} != "no" || defined(ALL_MODULES) _ipfilter= ipfilter .endif .if ${MK_INET_SUPPORT} != "no" && ${KERN_OPTS:MFIB_ALGO} _dpdk_lpm4= dpdk_lpm4 _fib_dxr= fib_dxr .endif .if ${MK_INET6_SUPPORT} != "no" && ${KERN_OPTS:MFIB_ALGO} _dpdk_lpm6= dpdk_lpm6 .endif .if ${MK_ISCSI} != "no" || defined(ALL_MODULES) SUBDIR+= cfiscsi SUBDIR+= iscsi .endif .if !empty(OPT_FDT) SUBDIR+= fdt .endif # Linuxulator .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_CPUARCH} == "i386" SUBDIR+= linprocfs SUBDIR+= linsysfs .endif .if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" SUBDIR+= linux .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" SUBDIR+= linux64 SUBDIR+= linux_common .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_CPUARCH} == "i386" _ena= ena .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ibcore= ibcore _ipoib= ipoib _iser= iser .endif _ipmi= ipmi _mlx4= mlx4 _mlx5= mlx5 .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _mlx4en= mlx4en _mlx5en= mlx5en .endif .if ${MK_OFED} != "no" || defined(ALL_MODULES) _mthca= mthca _mlx4ib= mlx4ib _mlx5ib= mlx5ib .endif _ossl= ossl _vmware= vmware .endif .if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES) _netgraph= netgraph .endif .if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \ ${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES) _pf= pf _pflog= pflog .if ${MK_INET_SUPPORT} != "no" _pfsync= pfsync .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" _bce= bce _fxp= fxp _ispfw= ispfw _ti= ti .if ${MACHINE_CPUARCH} != "mips" _mwlfw= mwlfw _otusfw= otusfw _ralfw= ralfw _rtwnfw= rtwnfw .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_ARCH} != "powerpc" && ${MACHINE_ARCH} != "powerpcspe" && \ ${MACHINE_CPUARCH} != "riscv" _cxgbe= cxgbe .endif .if ${MACHINE_ARCH} == "amd64" || ${MACHINE_ARCH} == "arm64" _ice= ice .if ${MK_SOURCELESS_UCODE} != "no" _ice_ddp= ice_ddp .endif .endif # These rely on 64bit atomics .if ${MACHINE_ARCH} != "powerpc" && ${MACHINE_ARCH} != "powerpcspe" && \ ${MACHINE_CPUARCH} != "mips" _mps= mps _mpr= mpr .endif .if ${MK_TESTS} != "no" || defined(ALL_MODULES) SUBDIR+= tests .endif .if ${MK_ZFS} != "no" || (defined(ALL_MODULES) && ${MACHINE_CPUARCH} != "powerpc") SUBDIR+= zfs .endif .if (${MACHINE_CPUARCH} == "mips" && ${MACHINE_ARCH:Mmips64} == "") _hwpmc_mips24k= hwpmc_mips24k _hwpmc_mips74k= hwpmc_mips74k .endif .if ${MACHINE_CPUARCH} != "aarch64" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && ${MACHINE_CPUARCH} != "powerpc" && \ ${MACHINE_CPUARCH} != "riscv" _syscons= syscons .endif .if ${MACHINE_CPUARCH} != "mips" # no BUS_SPACE_UNSPECIFIED # No barrier instruction support (specific to this driver) _sym= sym # intr_disable() is a macro, causes problems .if ${MK_SOURCELESS_UCODE} != "no" _cxgb= cxgb .endif .endif .if ${MACHINE_CPUARCH} == "aarch64" _allwinner= allwinner _armv8crypto= armv8crypto _dwwdt= dwwdt _em= em _enetc= enetc _felix= felix _rockchip= rockchip .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "arm" _sdhci_fdt= sdhci_fdt _e6000sw= e6000sw _neta= neta .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _agp= agp _aout= aout _bios= bios .if ${MK_SOURCELESS_UCODE} != "no" _bxe= bxe .endif _cardbus= cardbus _cbb= cbb _cpuctl= cpuctl _cpufreq= cpufreq _dpms= dpms _em= em _et= et _ftwd= ftwd _exca= exca _igc= igc _io= io _itwd= itwd _ix= ix _ixv= ixv .if ${MK_SOURCELESS_UCODE} != "no" _lio= lio .endif _mana= mana _mgb= mgb _nctgpio= nctgpio _ntb= ntb _ocs_fc= ocs_fc _qat= qat _qatfw= qatfw .if ${MK_OFED} != "no" || defined(ALL_MODULES) _rdma= rdma .endif _safe= safe _speaker= speaker _splash= splash _p2sb= p2sb _wbwd= wbwd _aac= aac _aacraid= aacraid _acpi= acpi .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _aesni= aesni .endif _amd_ecc_inject=amd_ecc_inject _amdsbwd= amdsbwd _amdsmn= amdsmn _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _blake2= blake2 .endif _bytgpio= bytgpio _chvgpio= chvgpio _ciss= ciss _chromebook_platform= chromebook_platform _coretemp= coretemp .if ${MK_SOURCELESS_HOST} != "no" && empty(KCSAN_ENABLED) _hpt27xx= hpt27xx .endif _hptiop= hptiop .if ${MK_SOURCELESS_HOST} != "no" && empty(KCSAN_ENABLED) _hptmv= hptmv _hptnr= hptnr _hptrr= hptrr .endif _hyperv= hyperv _ichwd= ichwd _ida= ida _intelspi= intelspi _ips= ips _isci= isci _ipw= ipw _iwi= iwi _iwm= iwm _iwn= iwn .if ${MK_SOURCELESS_UCODE} != "no" _ipwfw= ipwfw _iwifw= iwifw _iwmfw= iwmfw _iwnfw= iwnfw .endif _nfe= nfe _nvd= nvd _nvme= nvme _nvram= nvram .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _padlock= padlock _padlock_rng= padlock_rng _rdrand_rng= rdrand_rng .endif _pchtherm = pchtherm _s3= s3 _sdhci_acpi= sdhci_acpi _superio= superio _tpm= tpm _twa= twa _vesa= vesa _viawd= viawd _vmd= vmd _wpi= wpi .if ${MK_SOURCELESS_UCODE} != "no" _wpifw= wpifw .endif _x86bios= x86bios .endif .if ${MACHINE_CPUARCH} == "amd64" _amdgpio= amdgpio _ccp= ccp _iavf= iavf _ioat= ioat _ixl= ixl _nvdimm= nvdimm _pms= pms _qlxge= qlxge _qlxgb= qlxgb _sume= sume .if ${MK_SOURCELESS_UCODE} != "no" _qlxgbe= qlxgbe _qlnx= qlnx .endif _sfxge= sfxge _sgx= sgx _sgx_linux= sgx_linux _smartpqi= smartpqi _p2sb= p2sb .if ${MK_BHYVE} != "no" || defined(ALL_MODULES) .if ${KERN_OPTS:MSMP} _vmm= vmm .endif .endif .endif .if ${MACHINE_CPUARCH} == "i386" # XXX some of these can move to the general case when de-i386'ed # XXX some of these can move now, but are untested on other architectures. _3dfx= 3dfx _3dfx_linux= 3dfx_linux .if ${MK_SOURCELESS_HOST} != "no" _ce= ce .endif .if ${MK_SOURCELESS_HOST} != "no" _cp= cp .endif _glxiic= glxiic _glxsb= glxsb _pcfclock= pcfclock _pst= pst _sbni= sbni .endif .if ${MACHINE_ARCH} == "armv7" _cfi= cfi _cpsw= cpsw .endif .if ${MACHINE_CPUARCH} == "powerpc" _aacraid= aacraid _agp= agp _an= an _cardbus= cardbus _cbb= cbb _cfi= cfi _cpufreq= cpufreq _exca= exca _ffec= ffec _nvd= nvd _nvme= nvme .endif .if ${MACHINE_ARCH:Mpowerpc64*} != "" _ipmi= ipmi _ixl= ixl _nvram= opal_nvram .endif .if ${MACHINE_CPUARCH} == "powerpc" && ${MACHINE_ARCH} != "powerpcspe" # Don't build powermac_nvram for powerpcspe, it's never supported. _nvram+= powermac_nvram .endif .endif .if ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "aarch64" _bcm283x_clkman= bcm283x_clkman _bcm283x_pwm= bcm283x_pwm .endif .if !(${COMPILER_TYPE} == "clang" && ${COMPILER_VERSION} < 110000) # LLVM 10 crashes when building if_malo_pci.c, fixed in LLVM11: # https://bugs.llvm.org/show_bug.cgi?id=44351 _malo= malo .endif SUBDIR+=${MODULES_EXTRA} .for reject in ${WITHOUT_MODULES} SUBDIR:= ${SUBDIR:N${reject}} .endfor # Calling kldxref(8) for each module is expensive. .if !defined(NO_XREF) .MAKEFLAGS+= -DNO_XREF afterinstall: .PHONY @if type kldxref >/dev/null 2>&1; then \ ${ECHO} ${KLDXREF_CMD} ${DESTDIR}${KMODDIR}; \ ${KLDXREF_CMD} ${DESTDIR}${KMODDIR}; \ fi .endif SUBDIR:= ${SUBDIR:u:O} .include diff --git a/sys/modules/amr/Makefile b/sys/modules/amr/Makefile deleted file mode 100644 index a17ed246b8c7..000000000000 --- a/sys/modules/amr/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# $FreeBSD$ - -.PATH: ${SRCTOP}/sys/dev/amr - -SUBDIR= amr_cam -.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" -SUBDIR+= amr_linux -.endif - -KMOD= amr -SRCS= amr.c amr_pci.c amr_disk.c device_if.h bus_if.h pci_if.h - -# Enable a questionable optimisation for newer adapters -#CFLAGS+= -DAMR_QUARTZ_GOFASTER - -# Debugging -#CFLAGS+= -DAMR_DEBUG=3 - -EXPORT_SYMS= YES - -.include diff --git a/sys/modules/amr/amr_cam/Makefile b/sys/modules/amr/amr_cam/Makefile deleted file mode 100644 index ab7da0a331ec..000000000000 --- a/sys/modules/amr/amr_cam/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# $FreeBSD$ - -.PATH: ${SRCTOP}/sys/dev/amr - -KMOD= amr_cam -SRCS= amr_cam.c device_if.h bus_if.h -SRCS+= opt_cam.h opt_scsi.h - -.include diff --git a/sys/modules/amr/amr_linux/Makefile b/sys/modules/amr/amr_linux/Makefile deleted file mode 100644 index b5cf493098d9..000000000000 --- a/sys/modules/amr/amr_linux/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $FreeBSD$ - -.PATH: ${SRCTOP}/sys/dev/amr - -KMOD= amr_linux -SRCS= amr_linux.c device_if.h bus_if.h - -.include diff --git a/tools/kerneldoc/subsys/Doxyfile-dev_amr b/tools/kerneldoc/subsys/Doxyfile-dev_amr deleted file mode 100644 index 9daa34e5ffac..000000000000 --- a/tools/kerneldoc/subsys/Doxyfile-dev_amr +++ /dev/null @@ -1,21 +0,0 @@ -# Doxyfile 1.5.2 - -# $FreeBSD$ - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- -PROJECT_NAME = "FreeBSD kernel AMR device code" -OUTPUT_DIRECTORY = $(DOXYGEN_DEST_PATH)/dev_amr/ -EXTRACT_ALL = YES # for undocumented src, no warnings enabled -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- -INPUT = $(DOXYGEN_SRC_PATH)/dev/amr/ \ - $(NOTREVIEWED) - -GENERATE_TAGFILE = dev_amr/dev_amr.tag - -@INCLUDE_PATH = $(DOXYGEN_INCLUDE_PATH) -@INCLUDE = common-Doxyfile -