diff --git a/share/man/man4/vt.4 b/share/man/man4/vt.4
index bb31b1b18523..e057ca6e0351 100644
--- a/share/man/man4/vt.4
+++ b/share/man/man4/vt.4
@@ -1,382 +1,386 @@
 .\" Copyright (c) 2014 Warren Block
 .\" All rights reserved.
 .\"
 .\" Redistribution and use in source and binary forms, with or without
 .\" modification, are permitted provided that the following conditions
 .\" are met:
 .\" 1. Redistributions of source code must retain the above copyright
 .\"    notice, this list of conditions and the following disclaimer.
 .\" 2. Redistributions in binary form must reproduce the above copyright
 .\"    notice, this list of conditions and the following disclaimer in the
 .\"    documentation and/or other materials provided with the distribution.
 .\"
 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
 .\" $FreeBSD$
 .\"
-.Dd February 14, 2022
+.Dd March 4, 2022
 .Dt "VT" 4
 .Os
 .Sh NAME
 .Nm vt
 .Nd virtual terminal console driver
 .Sh SYNOPSIS
 .Cd "options TERMINAL_KERN_ATTR=_attribute_"
 .Cd "options TERMINAL_NORM_ATTR=_attribute_"
 .Cd "options VT_MAXWINDOWS=N"
 .Cd "options VT_ALT_TO_ESC_HACK=1"
 .Cd "options VT_TWOBUTTON_MOUSE"
 .Cd "options VT_FB_MAX_WIDTH=X"
 .Cd "options VT_FB_MAX_HEIGHT=Y"
 .Cd "options SC_NO_CUTPASTE"
 .Cd "device vt"
 .Pp
 In
 .Xr loader.conf 5 :
 .Cd hw.vga.textmode=1
 .Cd hw.vga.acpi_ignore_no_vga=1
 .Cd kern.vty=vt
 .Cd kern.vt.color.<colornum>.rgb="<colorspec>"
 .Cd kern.vt.fb.default_mode="<X>x<Y>"
 .Cd kern.vt.fb.modes.<connector>="<X>x<Y>"
 .Pp
 In
 .Xr loader.conf 5 or
 .Xr sysctl.conf 5 :
 .Cd kern.vt.kbd_halt=1
 .Cd kern.vt.kbd_poweroff=1
 .Cd kern.vt.kbd_reboot=1
 .Cd kern.vt.kbd_debug=1
 .Cd kern.vt.kbd_panic=0
 .Cd kern.vt.enable_bell=1
 .Sh DESCRIPTION
 The
 .Nm
 device provides multiple virtual terminals with an extensive feature
 set:
 .Bl -item -offset indent
 .It
 Unicode UTF-8 text with double-width characters.
 .It
 Large font maps in graphics mode, including support for Asian
 character sets.
 .It
 Graphics-mode consoles.
 .It
 Integration with
 KMS
 .Pq Kernel Mode Setting
 video drivers for switching between the
 .Em X Window System
 and virtual terminals.
 .El
 .Ss Virtual Terminals
 Multiple virtual terminals are provided on a single computer.
 Up to sixteen virtual terminals can be defined.
 A single virtual terminal is connected to the screen and keyboard
 at a time.
 Key combinations are used to select a virtual terminal.
 Alt-F1 through Alt-F12 correspond to the first twelve virtual terminals.
 If more than twelve virtual terminals are created, Shift-Alt-F1 through
 Shift-Alt-F4 are used to switch to the additional terminals.
 .Ss Copying and Pasting Text with a Mouse
 Copying and pasting text from the screen with a mouse is supported.
 Press and hold down mouse button 1, usually the left button, while
 moving the mouse to select text.
 Selected text is highlighted with reversed foreground and background
 colors.
 To select more text after releasing mouse button 1, press mouse button
 3, usually the right button.
 To paste text that has been selected, press mouse button 2, usually the
 middle button.
 The text is entered as if it were typed at the keyboard.
 The
 .Dv VT_TWOBUTTON_MOUSE
 kernel option can be used with mice that only have two buttons.
 Setting this option makes the second mouse button into the
 paste button.
 See
 .Xr moused 8
 for more information.
 .Ss Scrolling Back
 Output that has scrolled off the screen can be reviewed by pressing the
 Scroll Lock key, then scrolling up and down with the arrow keys.
 The Page Up and Page Down keys scroll up or down a full screen at a
 time.
 The Home and End keys jump to the beginning or end of the scrollback
 buffer.
 When finished reviewing, press the Scroll Lock key again to return to
 normal use.
 .Sh DRIVER CONFIGURATION
 .Ss Kernel Configuration Options
 These kernel options control the
 .Nm
 driver.
 .Bl -tag -width MAXCONS
 .It Dv TERMINAL_NORM_ATTR= Ns Pa attribute
 .It Dv TERMINAL_KERN_ATTR= Ns Pa attribute
 These options change the default colors used for normal and kernel
 text.
 Available colors are defined in
 .In sys/terminal.h .
 See
 .Sx EXAMPLES
 below.
 .It Dv VT_MAXWINDOWS=N
 Set the number of virtual terminals to be created to
 .Fa N .
 The value defaults to 12.
 .It Dv VT_ALT_TO_ESC_HACK=1
 When the Alt key is held down while pressing another key, send an ESC
 sequence instead of the Alt key.
 .It Dv VT_TWOBUTTON_MOUSE
 If defined, swap the functions of mouse buttons 2 and 3.
 In effect, this makes the right-hand mouse button perform a paste.
 These options are checked in the order shown.
 .It Dv SC_NO_CUTPASTE
 Disable mouse support.
 .It VT_FB_MAX_WIDTH=X
 Set the maximum width to
 .Fa X .
 .It VT_FB_MAX_HEIGHT=Y
 Set the maximum height to
 .Fa Y .
 .El
 .Sh BACKWARDS COMPATIBILITY
 Several options are provided for compatibility with the previous
 console device,
 .Xr sc 4 .
 These options will be removed in a future
 .Fx
 version.
 .Bl -column -offset indent ".Sy vt VT_TWOBUTTON_MOUSE" ".Sy SC_TWOBUTTON_MOUSE"
 .It Sy vt Option Name Ta Sy sc Option Name
 .It Dv TERMINAL_KERN_ATTR Ta Dv SC_KERNEL_CONS_ATTR
 .It Dv TERMINAL_NORM_ATTR Ta Dv SC_NORM_ATTR
 .It Dv VT_TWOBUTTON_MOUSE Ta Dv SC_TWOBUTTON_MOUSE
 .It Dv VT_MAXWINDOWS Ta Dv MAXCONS
 .It none Ta Dv SC_NO_CUTPASTE
 .El
 .Sh START-UP OPERATION WITH X86 BIOS SYSTEMS
 The computer BIOS starts in text mode, and
 the
 .Fx
 .Xr loader 8
 runs, loading the kernel.
 If
 .Va hw.vga.textmode
 is set, the system remains in text mode.
 Otherwise,
 .Nm
 switches to 640x480x16 VGA mode using
 .Cm vt_vga .
 If a KMS
 .Pq Kernel Mode Setting
 video driver is available, the display is switched to high resolution
 and the KMS driver takes over.
 When a KMS driver is not available,
 .Cm vt_vga
 remains active.
 .Sh LOADER TUNABLES
 These settings can be entered at the
 .Xr loader 8
 prompt or in
 .Xr loader.conf 5 .
 .Bl -tag -width indent
 .It Va hw.vga.textmode
 Set to 1 to use virtual terminals in text mode instead of graphics mode.
 Features that require graphics mode, like loadable fonts, will be
 disabled.
 .Pp
 If a KMS driver is loaded the console will switch to (and remain in)
 graphics mode.
 .It Va hw.vga.acpi_ignore_no_vga
 Set to 1 to force the usage of the VGA driver regardless of whether
 ACPI IAPC_BOOT_ARCH signals no VGA support.
 Can be used to workaround firmware bugs in the ACPI tables.
 .It Va kern.vty
 Set this value to
 .Ql vt
 or
 .Ql sc
 to choose a specific system console, overriding the default.
 The
 .Pa GENERIC
 kernel uses
 .Nm
 when this value is not set.
 .It Va kern.vt.color. Ns Ar colornum Ns Va .rgb
 Set this value to override default palette entry for color
 .Pa colornum
 which should be in a range from 0 to 15 inclusive.
 The value should be either a comma-separated triplet of
 red, green, and blue values in a range from 0 to 255 or
 HTML-like hex triplet.
 See
 .Sx EXAMPLES
 below.
+.Pp
+Note: The
+.Nm
+VGA hardware driver does not support palette configuration.
 .It Va kern.vt.fb.default_mode
 Set this value to a graphic mode to override the default mode picked by the
 .Nm
 backend.
 The mode is applied to all output connectors.
 This is currently only supported by the
 .Cm vt_fb
 backend when it is paired with a KMS video driver.
 .It Va kern.vt.fb.modes. Ns Pa connector_name
 Set this value to a graphic mode to override the default mode picked by the
 .Nm
 backend.
 This mode is applied to the output connector
 .Pa connector_name
 only.
 It has precedence over
 .Va kern.vt.fb.default_mode .
 The names of available connector names can be found in
 .Xr dmesg 8
 after loading the KMS driver.
 It will contain a list of connectors and their associated tunables.
 This is currently only supported by the
 .Cm vt_fb
 backend when it is paired with a KMS video driver.
 .El
 .Sh KEYBOARD SYSCTL TUNABLES
 These settings control whether certain special key combinations are enabled or
 ignored.
 The specific key combinations can be configured by using a
 .Xr keymap 5
 file.
 .Pp
 These settings can be entered at the
 .Xr loader 8
 prompt or in
 .Xr loader.conf 5
 and can also be changed at runtime with the
 .Xr sysctl 8
 command.
 .Bl -tag -width indent
 .It Va kern.vt.kbd_halt
 Enable halt keyboard combination.
 .It Va kern.vt.kbd_poweroff
 Enable power off key combination.
 .It Va kern.vt.kbd_reboot
 Enable reboot key combination, usually Ctrl+Alt+Del.
 .It Va kern.vt.kbd_debug
 Enable debug request key combination, usually Ctrl+Alt+Esc.
 .It Va kern.vt.kbd_panic
 Enable panic key combination.
 .El
 .Sh OTHER SYSCTL TUNABLES
 These settings can be entered at the
 .Xr loader 8
 prompt, set in
 .Xr loader.conf 5 ,
 or changed at runtime with
 .Xr sysctl 8 .
 .Bl -tag -width indent
 .It Va kern.vt.enable_bell
 Enable the terminal bell.
 .El
 .Sh FILES
 .Bl -tag -width /usr/share/vt/keymaps/* -compact
 .It Pa /dev/console
 .It Pa /dev/consolectl
 .It Pa /dev/ttyv*
 virtual terminals
 .It Pa /etc/ttys
 terminal initialization information
 .It Pa /usr/share/vt/fonts/*.fnt
 console fonts
 .It Pa /usr/share/vt/keymaps/*.kbd
 keyboard layouts
 .El
 .Sh EXAMPLES
 This example changes the default color of normal text to green on a
 black background, or black on a green background when reversed.
 Note that white space cannot be used inside the attribute string
 because of the current implementation of
 .Xr config 8 .
 .Pp
 .Dl "options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK)"
 .Pp
 This line changes the default color of kernel messages to be bright red
 on a black background, or black on a bright red background when reversed.
 .Pp
 .Dl "options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK)"
 .Pp
 To set a 1024x768 mode on all output connectors, put the following line in
 .Pa /boot/loader.conf :
 .Pp
 .Dl kern.vt.fb.default_mode="1024x768"
 .Pp
 To set a 800x600 only on a laptop builtin screen, use the following line instead:
 .Pp
 .Dl kern.vt.fb.modes.LVDS-1="800x600"
 .Pp
 The connector name was found in
 .Xr dmesg 8 :
 .Pp
 .Dl info: [drm] Connector LVDS-1: get mode from tunables:
 .Dl info: [drm]   - kern.vt.fb.modes.LVDS-1
 .Dl info: [drm]   - kern.vt.fb.default_mode
 .Pp
 To set black and white colors of console palette
 .Pp
 .Dl kern.vt.color.0.rgb="10,10,10"
 .Dl kern.vt.color.15.rgb="#f0f0f0"
 .Sh SEE ALSO
 .Xr kbdcontrol 1 ,
 .Xr login 1 ,
 .Xr vidcontrol 1 ,
 .Xr atkbd 4 ,
 .Xr atkbdc 4 ,
 .Xr kbdmux 4 ,
 .Xr keyboard 4 ,
 .Xr screen 4 ,
 .Xr splash 4 ,
 .Xr syscons 4 ,
 .Xr ukbd 4 ,
 .Xr kbdmap 5 ,
 .Xr rc.conf 5 ,
 .Xr ttys 5 ,
 .Xr config 8 ,
 .Xr getty 8 ,
 .Xr kldload 8 ,
 .Xr moused 8 ,
 .Xr vtfontcvt 8
 .Sh HISTORY
 The
 .Nm
 driver first appeared in
 .Fx 9.3 .
 .Sh AUTHORS
 .An -nosplit
 The
 .Nm
 device driver was developed by
 .An \&Ed Schouten Aq Mt ed@FreeBSD.org ,
 .An \&Ed Maste Aq Mt emaste@FreeBSD.org ,
 and
 .An Aleksandr Rybalko Aq Mt ray@FreeBSD.org ,
 with sponsorship provided by the
 .Fx
 Foundation.
 This manual page was written by
 .An Warren Block Aq Mt wblock@FreeBSD.org .
 .Sh CAVEATS
 Paste buffer size is limited by the system value
 .Brq Dv MAX_INPUT ,
 the number of bytes that can be stored in the terminal
 input queue, usually 1024 bytes
 (see
 .Xr termios 4 ) .