diff --git a/bin/ls/ls.1 b/bin/ls/ls.1 index e8b9835e6038..ccb9087dd764 100644 --- a/bin/ls/ls.1 +++ b/bin/ls/ls.1 @@ -1,951 +1,953 @@ .\"- .\" Copyright (c) 1980, 1990, 1991, 1993, 1994 .\" The Regents of the University of California. All rights reserved. .\" .\" This code is derived from software contributed to Berkeley by .\" the Institute of Electrical and Electronics Engineers, Inc. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)ls.1 8.7 (Berkeley) 7/29/94 .\" -.Dd October 31, 2022 +.Dd July 22, 2024 .Dt LS 1 .Os .Sh NAME .Nm ls .Nd list directory contents .Sh SYNOPSIS .Nm .Op Fl ABCFGHILPRSTUWZabcdfghiklmnopqrstuvwxy1\&, .Op Fl -color Ns = Ns Ar when .Op Fl D Ar format .Op Ar .Sh DESCRIPTION For each operand that names a .Ar file of a type other than directory, .Nm displays its name as well as any requested, associated information. For each operand that names a .Ar file of type directory, .Nm displays the names of files contained within that directory, as well as any requested, associated information. .Pp If no operands are given, the contents of the current directory are displayed. If more than one operand is given, non-directory operands are displayed first; directory and non-directory operands are sorted separately and in lexicographical order. .Pp The following options are available: .Bl -tag -width indent .It Fl A Include directory entries whose names begin with a dot .Pq Sq Pa \&. except for .Pa \&. and .Pa .. . Automatically set for the super-user unless .Fl I is specified. .It Fl B Force printing of non-printable characters (as defined by .Xr ctype 3 and current locale settings) in file names as .Li \e Ns Va xxx , where .Va xxx is the numeric value of the character in octal. This option is not defined in .St -p1003.1-2008 . .It Fl C Force multi-column output; this is the default when output is to a terminal. .It Fl D Ar format When printing in the long .Pq Fl l format, use .Ar format to format the date and time output. The argument .Ar format is a string used by .Xr strftime 3 . Depending on the choice of format string, this may result in a different number of columns in the output. This option overrides the .Fl T option. This option is not defined in .St -p1003.1-2008 . .It Fl F Display a slash .Pq Ql / immediately after each pathname that is a directory, an asterisk .Pq Ql * after each that is executable, an at sign .Pq Ql @ after each symbolic link, an equals sign .Pq Ql = after each socket, a percent sign .Pq Ql % after each whiteout, and a vertical bar .Pq Ql \&| after each that is a .Tn FIFO . .It Fl G Enable colorized output. This option is equivalent to defining .Ev CLICOLOR or .Ev COLORTERM in the environment and setting .Fl -color Ns = Ns Ar auto . (See below.) This functionality can be compiled out by removing the definition of .Ev COLORLS . This option is not defined in .St -p1003.1-2008 . .It Fl H Symbolic links on the command line are followed. This option is assumed if none of the .Fl F , d , or .Fl l options are specified. .It Fl I Prevent .Fl A from being automatically set for the super-user. This option is not defined in .St -p1003.1-2008 . .It Fl L If argument is a symbolic link, list the file or directory the link references rather than the link itself. This option cancels the .Fl P option. .It Fl P If argument is a symbolic link, list the link itself rather than the object the link references. This option cancels the .Fl H and .Fl L options. .It Fl R Recursively list subdirectories encountered. .It Fl S Sort by size (largest file first) before sorting the operands in lexicographical order. .It Fl T When printing in the long .Pq Fl l format, display complete time information for the file, including month, day, hour, minute, second, and year. The .Fl D option gives even more control over the output format. This option is not defined in .St -p1003.1-2008 . .It Fl U Use time when file was created for sorting or printing. This option is not defined in .St -p1003.1-2008 . .It Fl W Display whiteouts when scanning directories. This option is not defined in .St -p1003.1-2008 . .It Fl Z Display each file's MAC label; see .Xr maclabel 7 . This option is not defined in .St -p1003.1-2008 . .It Fl a Include directory entries whose names begin with a dot .Pq Sq Pa \&. . .It Fl b As .Fl B , but use .Tn C escape codes whenever possible. This option is not defined in .St -p1003.1-2008 . .It Fl c Use time when file status was last changed for sorting or printing. .It Fl -color Ns = Ns Ar when Output colored escape sequences based on .Ar when , which may be set to either .Cm always , .Cm auto , or .Cm never . .Pp .Cm always will make .Nm always output color. If .Ev TERM is unset or set to an invalid terminal, then .Nm will fall back to explicit .Tn ANSI escape sequences without the help of .Xr termcap 5 . .Cm always is the default if .Fl -color is specified without an argument. .Pp .Cm auto will make .Nm output escape sequences based on .Xr termcap 5 , but only if .Dv stdout is a tty and either the .Fl G flag is specified or the .Ev COLORTERM environment variable is set and not empty. .Pp .Cm never will disable color regardless of environment variables. .Cm never is the default when neither .Fl -color nor .Fl G is specified. .Pp For compatibility with GNU coreutils, .Nm supports .Cm yes or .Cm force as equivalent to .Cm always , .Cm no or .Cm none as equivalent to .Cm never , and .Cm tty or .Cm if-tty as equivalent to .Cm auto . .It Fl d Directories are listed as plain files (not searched recursively). .It Fl f Output is not sorted. This option turns on .Fl a . It also negates the effect of the .Fl r , .Fl S and .Fl t options. As allowed by .St -p1003.1-2008 , this option has no effect on the .Fl d , .Fl l , .Fl R and .Fl s options. .It Fl g This option has no effect. It is only available for compatibility with .Bx 4.3 , where it was used to display the group name in the long .Pq Fl l format output. This option is incompatible with .St -p1003.1-2008 . .It Fl h When used with the .Fl l option, use unit suffixes: Byte, Kilobyte, Megabyte, Gigabyte, Terabyte and Petabyte in order to reduce the number of digits to four or fewer using base 2 for sizes. This option is not defined in .St -p1003.1-2008 . .It Fl i For each file, print the file's file serial number (inode number). .It Fl k This has the same effect as setting environment variable .Ev BLOCKSIZE to 1024, except that it also nullifies any .Fl h options to its left. .It Fl l (The lowercase letter .Dq ell . ) List files in the long format, as described in the .Sx The Long Format subsection below. .It Fl m Stream output format; list files across the page, separated by commas. .It Fl n Display user and group IDs numerically rather than converting to a user or group name in a long .Pq Fl l output. .It Fl o Include the file flags in a long .Pq Fl l output. This option is incompatible with .St -p1003.1-2008 . See .Xr chflags 1 for a list of file flags and their meanings. .It Fl p Write a slash .Pq Ql / after each filename if that file is a directory. .It Fl q Force printing of non-graphic characters in file names as the character .Ql \&? ; this is the default when output is to a terminal. .It Fl r Reverse the order of the sort. .It Fl s Display the number of blocks used in the file system by each file. Block sizes and directory totals are handled as described in .Sx The Long Format subsection below, except (if the long format is not also requested) the directory totals are not output when the output is in a single column, even if multi-column output is requested. .It Fl t Sort by descending time modified (most recently modified first). If two files have the same modification timestamp, sort their names in ascending lexicographical order. The .Fl r option reverses both of these sort orders. .Pp Note that these sort orders are contradictory: the time sequence is in descending order, the lexicographical sort is in ascending order. This behavior is mandated by .St -p1003.2 . This feature can cause problems listing files stored with sequential names on FAT file systems, such as from digital cameras, where it is possible to have more than one image with the same timestamp. In such a case, the photos cannot be listed in the sequence in which they were taken. To ensure the same sort order for time and for lexicographical sorting, set the environment variable .Ev LS_SAMESORT or use the .Fl y option. This causes .Nm to reverse the lexicographical sort order when sorting files with the same modification timestamp. .It Fl u Use time of last access, instead of time of last modification of the file for sorting .Pq Fl t or printing .Pq Fl l . .It Fl v Sort following a natural ordering, using .Xr strverscmp 3 instead of .Xr strcoll 3 as the comparison function. E.g., files lexicographically ordered "bloem1", "bloem10", and "bloem9" would instead be ordered "bloem1", "bloem9", and "bloem10", as one would perhaps expect. .It Fl w Force raw printing of non-printable characters. This is the default when output is not to a terminal. This option is not defined in .St -p1003.1-2001 . .It Fl x The same as .Fl C , except that the multi-column output is produced with entries sorted across, rather than down, the columns. .It Fl y When the .Fl t option is set, sort the alphabetical output in the same order as the time output. This has the same effect as setting .Ev LS_SAMESORT . See the description of the .Fl t option for more details. This option is not defined in .St -p1003.1-2001 . .It Fl 1 (The numeric digit .Dq one . ) Force output to be one entry per line. This is the default when output is not to a terminal. .It Fl , (Comma) When the .Fl l +or +.Fl s option is set, print file sizes grouped and separated by thousands using the non-monetary separator returned by .Xr localeconv 3 , typically a comma or period. If no locale is set, or the locale does not have a non-monetary separator, this option has no effect. This option is not defined in .St -p1003.1-2001 . .El .Pp The .Fl 1 , C , x , and .Fl l options all override each other; the last one specified determines the format used. .Pp The .Fl c , u , and .Fl U options all override each other; the last one specified determines the file time used. .Pp The .Fl S and .Fl t options override each other; the last one specified determines the sort order used. .Pp The .Fl B , b , w , and .Fl q options all override each other; the last one specified determines the format used for non-printable characters. .Pp The .Fl H , L and .Fl P options all override each other (either partially or fully); they are applied in the order specified. .Pp By default, .Nm lists one entry per line to standard output; the exceptions are to terminals or when the .Fl C or .Fl x options are specified. .Pp File information is displayed with one or more .Ao blank Ac Ns s separating the information associated with the .Fl i , s , and .Fl l options. .Ss The Long Format If the .Fl l option is given, the following information is displayed for each file: file mode, number of links, owner name, group name, MAC label, number of bytes in the file, abbreviated month, day-of-month file was last modified, hour file last modified, minute file last modified, and the pathname. .Pp If the modification time of the file is more than 6 months in the past or future, and the .Fl D or .Fl T are not specified, then the year of the last modification is displayed in place of the hour and minute fields. .Pp If the owner or group names are not a known user or group name, or the .Fl n option is given, the numeric ID's are displayed. .Pp If the file is a character special or block special file, the device number for the file is displayed in the size field. If the file is a symbolic link the pathname of the linked-to file is preceded by .Dq Li -> . .Pp The listing of a directory's contents is preceded by a labeled total number of blocks used in the file system by the files which are listed as the directory's contents (which may or may not include .Pa \&. and .Pa .. and other files which start with a dot, depending on other options). .Pp The default block size is 512 bytes. The block size may be set with option .Fl k or environment variable .Ev BLOCKSIZE . Numbers of blocks in the output will have been rounded up so the numbers of bytes is at least as many as used by the corresponding file system blocks (which might have a different size). .Pp The file mode printed under the .Fl l option consists of the entry type and the permissions. The entry type character describes the type of file, as follows: .Pp .Bl -tag -width 4n -offset indent -compact .It Sy \- Regular file. .It Sy b Block special file. .It Sy c Character special file. .It Sy d Directory. .It Sy l Symbolic link. .It Sy p .Tn FIFO . .It Sy s Socket. .It Sy w Whiteout. .El .Pp The next three fields are three characters each: owner permissions, group permissions, and other permissions. Each field has three character positions: .Bl -enum -offset indent .It If .Sy r , the file is readable; if .Sy \- , it is not readable. .It If .Sy w , the file is writable; if .Sy \- , it is not writable. .It The first of the following that applies: .Bl -tag -width 4n -offset indent .It Sy S If in the owner permissions, the file is not executable and set-user-ID mode is set. If in the group permissions, the file is not executable and set-group-ID mode is set. .It Sy s If in the owner permissions, the file is executable and set-user-ID mode is set. If in the group permissions, the file is executable and setgroup-ID mode is set. .It Sy x The file is executable or the directory is searchable. .It Sy \- The file is neither readable, writable, executable, nor set-user-ID nor set-group-ID mode, nor sticky. (See below.) .El .Pp These next two apply only to the third character in the last group (other permissions). .Bl -tag -width 4n -offset indent .It Sy T The sticky bit is set (mode .Li 1000 ) , but not execute or search permission. (See .Xr chmod 1 or .Xr sticky 7 . ) .It Sy t The sticky bit is set (mode .Li 1000 ) , and is searchable or executable. (See .Xr chmod 1 or .Xr sticky 7 . ) .El .El .Pp The next field contains a plus .Pq Ql + character if the file has an ACL, or a space .Pq Ql " " if it does not. The .Nm utility does not show the actual ACL; use .Xr getfacl 1 to do this. .Sh ENVIRONMENT The following environment variables affect the execution of .Nm : .Bl -tag -width ".Ev CLICOLOR_FORCE" .It Ev BLOCKSIZE If this is set, its value, rounded up to 512 or down to a multiple of 512, will be used as the block size in bytes by the .Fl l and .Fl s options. See .Sx The Long Format subsection for more information. .It Ev CLICOLOR Use .Tn ANSI color sequences to distinguish file types. See .Ev LSCOLORS below. In addition to the file types mentioned in the .Fl F option some extra attributes (setuid bit set, etc.) are also displayed. The colorization is dependent on a terminal type with the proper .Xr termcap 5 capabilities. The default .Dq Li cons25 console has the proper capabilities, but to display the colors in an .Xr xterm 1 , for example, the .Ev TERM variable must be set to .Dq Li xterm-color . Other terminal types may require similar adjustments. Colorization is silently disabled if the output is not directed to a terminal unless the .Ev CLICOLOR_FORCE variable is defined or .Fl -color is set to .Dq always . .It Ev CLICOLOR_FORCE Color sequences are normally disabled if the output is not directed to a terminal. This can be overridden by setting this variable. The .Ev TERM variable still needs to reference a color capable terminal however otherwise it is not possible to determine which color sequences to use. .It Ev COLORTERM See description for .Ev CLICOLOR above. .It Ev COLUMNS If this variable contains a string representing a decimal integer, it is used as the column position width for displaying multiple-text-column output. The .Nm utility calculates how many pathname text columns to display based on the width provided. (See .Fl C and .Fl x . ) .It Ev LANG The locale to use when determining the order of day and month in the long .Fl l format output. See .Xr environ 7 for more information. .It Ev LSCOLORS The value of this variable describes what color to use for which attribute when colors are enabled with .Ev CLICOLOR or .Ev COLORTERM . This string is a concatenation of pairs of the format .Ar f Ns Ar b , where .Ar f is the foreground color and .Ar b is the background color. When the background color is capitalized, the text will underlined. .Pp The color designators are as follows: .Pp .Bl -tag -width 4n -offset indent -compact .It Sy a black .It Sy b red .It Sy c green .It Sy d brown .It Sy e blue .It Sy f magenta .It Sy g cyan .It Sy h light grey .It Sy A bold or underlined black, usually shows up as dark grey .It Sy B bold or underlined red .It Sy C bold or underlined green .It Sy D bold or underlined brown, usually shows up as yellow .It Sy E bold or underlined blue .It Sy F bold or underlined magenta .It Sy G bold or underlined cyan .It Sy H bold or underlined light grey; looks like bright white .It Sy x default foreground or background .It Sy X default foreground or background, with an underline or bold .El .Pp Note that the above are standard .Tn ANSI colors. The actual display may differ depending on the color capabilities of the terminal in use. .Pp The order of the attributes are as follows: .Pp .Bl -enum -offset indent -compact .It directory .It symbolic link .It socket .It pipe .It executable .It block special .It character special .It executable with setuid bit set .It executable with setgid bit set .It directory writable to others, with sticky bit .It directory writable to others, without sticky bit .El .Pp The default is .Qq "exfxcxdxbxegedabagacad" , i.e., blue foreground and default background for regular directories, black foreground and red background for setuid executables, etc. .It Ev LS_COLWIDTHS If this variable is set, it is considered to be a colon-delimited list of minimum column widths. Unreasonable and insufficient widths are ignored (thus zero signifies a dynamically sized column). Not all columns have changeable widths. The fields are, in order: inode, block count, number of links, user name, group name, flags, file size, file name. .It Ev LS_SAMESORT If this variable is set, the .Fl t option sorts the names of files with the same modification timestamp in the same sense as the time sort. See the description of the .Fl t option for more details. .It Ev TERM The .Ev CLICOLOR and .Ev COLORTERM functionality depends on a terminal type with color capabilities. .It Ev TZ The timezone to use when displaying dates. See .Xr environ 7 for more information. .El .Sh EXIT STATUS .Ex -std .Sh EXAMPLES List the contents of the current working directory in long format: .Pp .Dl $ ls -l .Pp In addition to listing the contents of the current working directory in long format, show inode numbers, file flags (see .Xr chflags 1 ) , and suffix each filename with a symbol representing its file type: .Pp .Dl $ ls -lioF .Pp List the files in .Pa /var/log , sorting the output such that the mostly recently modified entries are printed first: .Pp .Dl $ ls -lt /var/log .Sh COMPATIBILITY The group field is now automatically included in the long listing for files in order to be compatible with the .St -p1003.2 specification. .Sh SEE ALSO .Xr chflags 1 , .Xr chmod 1 , .Xr getfacl 1 , .Xr sort 1 , .Xr xterm 1 , .Xr localeconv 3 , .Xr strcoll 3 , .Xr strftime 3 , .Xr strmode 3 , .Xr strverscmp 3 , .Xr termcap 5 , .Xr maclabel 7 , .Xr sticky 7 , .Xr symlink 7 , .Xr getfmac 8 .Sh STANDARDS With the exception of options .Fl g , n and .Fl o , the .Nm utility conforms to .St -p1003.1-2001 and .St -p1003.1-2008 . The options .Fl B , D , G , I , T , U , W , Z , b , h , v , w , y and .Fl , are non-standard extensions. .Pp The ACL support is compatible with .Tn IEEE Std\~1003.2c .Pq Dq Tn POSIX Ns .2c Draft\~17 (withdrawn). .Sh HISTORY An .Nm command appeared in .At v1 . .Pp The .Fl v option was added in .Fx 14.0 . .Sh BUGS To maintain backward compatibility, the relationships between the many options are quite complex. .Pp The exception mentioned in the .Fl s option description might be a feature that was based on the fact that single-column output usually goes to something other than a terminal. It is debatable whether this is a design bug. .Pp .St -p1003.2 mandates opposite sort orders for files with the same timestamp when sorting with the .Fl t option. diff --git a/bin/ls/ls.c b/bin/ls/ls.c index a04e455e8b06..6338e8c19581 100644 --- a/bin/ls/ls.c +++ b/bin/ls/ls.c @@ -1,1022 +1,1023 @@ /*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1989, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Michael Fischbein. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static const char copyright[] = "@(#) Copyright (c) 1989, 1993, 1994\n\ The Regents of the University of California. All rights reserved.\n"; #endif /* not lint */ #if 0 #ifndef lint static char sccsid[] = "@(#)ls.c 8.5 (Berkeley) 4/2/94"; #endif /* not lint */ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef COLORLS #include #include #endif #include "ls.h" #include "extern.h" /* * Upward approximation of the maximum number of characters needed to * represent a value of integral type t as a string, excluding the * NUL terminator, with provision for a sign. */ #define STRBUF_SIZEOF(t) (1 + CHAR_BIT * sizeof(t) / 3 + 1) /* * MAKENINES(n) turns n into (10**n)-1. This is useful for converting a width * into a number that wide in decimal. * XXX: Overflows are not considered. */ #define MAKENINES(n) \ do { \ intmax_t __i; \ \ /* Use a loop as all values of n are small. */ \ for (__i = 1; n > 0; __i *= 10) \ n--; \ n = __i - 1; \ } while(0) static void display(const FTSENT *, FTSENT *, int); static int mastercmp(const FTSENT * const *, const FTSENT * const *); static void traverse(int, char **, int); #define COLOR_OPT (CHAR_MAX + 1) static const struct option long_opts[] = { {"color", optional_argument, NULL, COLOR_OPT}, {NULL, no_argument, NULL, 0} }; static void (*printfcn)(const DISPLAY *); static int (*sortfcn)(const FTSENT *, const FTSENT *); long blocksize; /* block size units */ int termwidth = 80; /* default terminal width */ /* flags */ int f_accesstime; /* use time of last access */ int f_birthtime; /* use time of birth */ int f_flags; /* show flags associated with a file */ int f_humanval; /* show human-readable file sizes */ int f_inode; /* print inode */ static int f_kblocks; /* print size in kilobytes */ int f_label; /* show MAC label */ static int f_listdir; /* list actual directory, not contents */ static int f_listdot; /* list files beginning with . */ int f_longform; /* long listing format */ static int f_noautodot; /* do not automatically enable -A for root */ static int f_nofollow; /* don't follow symbolic link arguments */ int f_nonprint; /* show unprintables as ? */ static int f_nosort; /* don't sort output */ int f_notabs; /* don't use tab-separated multi-col output */ static int f_numericonly; /* don't convert uid/gid to name */ int f_octal; /* show unprintables as \xxx */ int f_octal_escape; /* like f_octal but use C escapes if possible */ static int f_recursive; /* ls subdirectories also */ static int f_reversesort; /* reverse whatever sort is used */ static int f_verssort; /* sort names using strverscmp(3) rather than strcoll(3) */ int f_samesort; /* sort time and name in same direction */ int f_sectime; /* print full time information */ static int f_singlecol; /* use single column output */ int f_size; /* list size in short listing */ static int f_sizesort; int f_slash; /* similar to f_type, but only for dirs */ int f_sortacross; /* sort across rows, not down columns */ int f_statustime; /* use time of last mode change */ static int f_stream; /* stream the output, separate with commas */ int f_thousands; /* show file sizes with thousands separators */ char *f_timeformat; /* user-specified time format */ static int f_timesort; /* sort by time vice name */ int f_type; /* add type character for non-regular files */ static int f_whiteout; /* show whiteout entries */ #ifdef COLORLS int colorflag = COLORFLAG_NEVER; /* passed in colorflag */ int f_color; /* add type in color for non-regular files */ bool explicitansi; /* Explicit ANSI sequences, no termcap(5) */ char *ansi_bgcol; /* ANSI sequence to set background colour */ char *ansi_fgcol; /* ANSI sequence to set foreground colour */ char *ansi_coloff; /* ANSI sequence to reset colours */ char *attrs_off; /* ANSI sequence to turn off attributes */ char *enter_bold; /* ANSI sequence to set color to bold mode */ char *enter_underline; /* ANSI sequence to enter underline mode */ #endif static int rval; static bool do_color_from_env(void) { const char *p; bool doit; doit = false; p = getenv("CLICOLOR"); if (p == NULL) { /* * COLORTERM is the more standard name for this variable. We'll * honor it as long as it's both set and not empty. */ p = getenv("COLORTERM"); if (p != NULL && *p != '\0') doit = true; } else doit = true; return (doit && (isatty(STDOUT_FILENO) || getenv("CLICOLOR_FORCE"))); } static bool do_color(void) { #ifdef COLORLS if (colorflag == COLORFLAG_NEVER) return (false); else if (colorflag == COLORFLAG_ALWAYS) return (true); #endif return (do_color_from_env()); } #ifdef COLORLS static bool do_color_always(const char *term) { return (strcmp(term, "always") == 0 || strcmp(term, "yes") == 0 || strcmp(term, "force") == 0); } static bool do_color_never(const char *term) { return (strcmp(term, "never") == 0 || strcmp(term, "no") == 0 || strcmp(term, "none") == 0); } static bool do_color_auto(const char *term) { return (strcmp(term, "auto") == 0 || strcmp(term, "tty") == 0 || strcmp(term, "if-tty") == 0); } #endif /* COLORLS */ int main(int argc, char *argv[]) { static char dot[] = ".", *dotav[] = {dot, NULL}; struct winsize win; int ch, fts_options, notused; char *p; const char *errstr = NULL; #ifdef COLORLS char termcapbuf[1024]; /* termcap definition buffer */ char tcapbuf[512]; /* capability buffer */ char *bp = tcapbuf, *term; #endif (void)setlocale(LC_ALL, ""); /* Terminal defaults to -Cq, non-terminal defaults to -1. */ if (isatty(STDOUT_FILENO)) { termwidth = 80; if ((p = getenv("COLUMNS")) != NULL && *p != '\0') termwidth = strtonum(p, 0, INT_MAX, &errstr); else if (ioctl(STDOUT_FILENO, TIOCGWINSZ, &win) != -1 && win.ws_col > 0) termwidth = win.ws_col; f_nonprint = 1; } else { f_singlecol = 1; /* retrieve environment variable, in case of explicit -C */ p = getenv("COLUMNS"); if (p) termwidth = strtonum(p, 0, INT_MAX, &errstr); } if (errstr) termwidth = 80; fts_options = FTS_PHYSICAL; if (getenv("LS_SAMESORT")) f_samesort = 1; /* * For historical compatibility, we'll use our autodetection if CLICOLOR * is set. */ #ifdef COLORLS if (getenv("CLICOLOR")) colorflag = COLORFLAG_AUTO; #endif while ((ch = getopt_long(argc, argv, "+1ABCD:FGHILPRSTUWXZabcdfghiklmnopqrstuvwxy,", long_opts, NULL)) != -1) { switch (ch) { /* * The -1, -C, -x and -l options all override each other so * shell aliasing works right. */ case '1': f_singlecol = 1; f_longform = 0; f_stream = 0; break; case 'C': f_sortacross = f_longform = f_singlecol = 0; break; case 'l': f_longform = 1; f_singlecol = 0; f_stream = 0; break; case 'x': f_sortacross = 1; f_longform = 0; f_singlecol = 0; break; /* The -c, -u, and -U options override each other. */ case 'c': f_statustime = 1; f_accesstime = 0; f_birthtime = 0; break; case 'u': f_accesstime = 1; f_statustime = 0; f_birthtime = 0; break; case 'U': f_birthtime = 1; f_accesstime = 0; f_statustime = 0; break; case 'f': f_nosort = 1; /* FALLTHROUGH */ case 'a': fts_options |= FTS_SEEDOT; /* FALLTHROUGH */ case 'A': f_listdot = 1; break; /* The -t and -S options override each other. */ case 'S': f_sizesort = 1; f_timesort = 0; break; case 't': f_timesort = 1; f_sizesort = 0; break; /* Other flags. Please keep alphabetic. */ case ',': f_thousands = 1; break; case 'B': f_nonprint = 0; f_octal = 1; f_octal_escape = 0; break; case 'D': f_timeformat = optarg; break; case 'F': f_type = 1; f_slash = 0; break; case 'G': /* * We both set CLICOLOR here and set colorflag to * COLORFLAG_AUTO, because -G should not force color if * stdout isn't a tty. */ setenv("CLICOLOR", "", 1); #ifdef COLORLS colorflag = COLORFLAG_AUTO; #endif break; case 'H': fts_options |= FTS_COMFOLLOW; f_nofollow = 0; break; case 'I': f_noautodot = 1; break; case 'L': fts_options &= ~FTS_PHYSICAL; fts_options |= FTS_LOGICAL; f_nofollow = 0; break; case 'P': fts_options &= ~FTS_COMFOLLOW; fts_options &= ~FTS_LOGICAL; fts_options |= FTS_PHYSICAL; f_nofollow = 1; break; case 'R': f_recursive = 1; break; case 'T': f_sectime = 1; break; case 'W': f_whiteout = 1; break; case 'Z': f_label = 1; break; case 'b': f_nonprint = 0; f_octal = 0; f_octal_escape = 1; break; /* The -d option turns off the -R option. */ case 'd': f_listdir = 1; f_recursive = 0; break; case 'g': /* Compatibility with 4.3BSD. */ break; case 'h': f_humanval = 1; break; case 'i': f_inode = 1; break; case 'k': f_humanval = 0; f_kblocks = 1; break; case 'm': f_stream = 1; f_singlecol = 0; f_longform = 0; break; case 'n': f_numericonly = 1; break; case 'o': f_flags = 1; break; case 'p': f_slash = 1; f_type = 1; break; case 'q': f_nonprint = 1; f_octal = 0; f_octal_escape = 0; break; case 'r': f_reversesort = 1; break; case 's': f_size = 1; break; case 'v': f_verssort = 1; break; case 'w': f_nonprint = 0; f_octal = 0; f_octal_escape = 0; break; case 'y': f_samesort = 1; break; case COLOR_OPT: #ifdef COLORLS if (optarg == NULL || do_color_always(optarg)) colorflag = COLORFLAG_ALWAYS; else if (do_color_auto(optarg)) colorflag = COLORFLAG_AUTO; else if (do_color_never(optarg)) colorflag = COLORFLAG_NEVER; else errx(2, "unsupported --color value '%s' (must be always, auto, or never)", optarg); break; #else warnx("color support not compiled in"); #endif default: case '?': usage(); } } argc -= optind; argv += optind; /* Root is -A automatically unless -I. */ if (!f_listdot && getuid() == (uid_t)0 && !f_noautodot) f_listdot = 1; /* * Enabling of colours is conditional on the environment in conjunction * with the --color and -G arguments, if supplied. */ if (do_color()) { #ifdef COLORLS if ((term = getenv("TERM")) != NULL && tgetent(termcapbuf, term) == 1) { ansi_fgcol = tgetstr("AF", &bp); ansi_bgcol = tgetstr("AB", &bp); attrs_off = tgetstr("me", &bp); enter_bold = tgetstr("md", &bp); enter_underline = tgetstr("us", &bp); /* To switch colours off use 'op' if * available, otherwise use 'oc', or * don't do colours at all. */ ansi_coloff = tgetstr("op", &bp); if (!ansi_coloff) ansi_coloff = tgetstr("oc", &bp); if (ansi_fgcol && ansi_bgcol && ansi_coloff) f_color = 1; } else if (colorflag == COLORFLAG_ALWAYS) { /* * If we're *always* doing color but we don't have * a functional TERM supplied, we'll fallback to * outputting raw ANSI sequences. */ f_color = 1; explicitansi = true; } #endif /*COLORLS*/ } #ifdef COLORLS if (f_color) { /* * We can't put tabs and color sequences together: * column number will be incremented incorrectly * for "stty oxtabs" mode. */ f_notabs = 1; (void)signal(SIGINT, colorquit); (void)signal(SIGQUIT, colorquit); parsecolors(getenv("LSCOLORS")); } #endif /* * If not -F, -i, -l, -s, -S or -t options, don't require stat * information, unless in color mode in which case we do * need this to determine which colors to display. */ if (!f_inode && !f_longform && !f_size && !f_timesort && !f_sizesort && !f_type #ifdef COLORLS && !f_color #endif ) fts_options |= FTS_NOSTAT; /* * If not -F, -P, -d or -l options, follow any symbolic links listed on * the command line, unless in color mode in which case we need to * distinguish file type for a symbolic link itself and its target. */ if (!f_nofollow && !f_longform && !f_listdir && (!f_type || f_slash) #ifdef COLORLS && !f_color #endif ) fts_options |= FTS_COMFOLLOW; /* * If -W, show whiteout entries */ #ifdef FTS_WHITEOUT if (f_whiteout) fts_options |= FTS_WHITEOUT; #endif /* If -i, -l or -s, figure out block size. */ if (f_inode || f_longform || f_size) { if (f_kblocks) blocksize = 2; else { (void)getbsize(¬used, &blocksize); blocksize /= 512; } } /* Select a sort function. */ if (f_reversesort) { if (f_sizesort) sortfcn = revsizecmp; else if (f_verssort) sortfcn = revverscmp; else if (!f_timesort) sortfcn = revnamecmp; else if (f_accesstime) sortfcn = revacccmp; else if (f_birthtime) sortfcn = revbirthcmp; else if (f_statustime) sortfcn = revstatcmp; else /* Use modification time. */ sortfcn = revmodcmp; } else { if (f_sizesort) sortfcn = sizecmp; else if (f_verssort) sortfcn = verscmp; else if (!f_timesort) sortfcn = namecmp; else if (f_accesstime) sortfcn = acccmp; else if (f_birthtime) sortfcn = birthcmp; else if (f_statustime) sortfcn = statcmp; else /* Use modification time. */ sortfcn = modcmp; } /* Select a print function. */ if (f_singlecol) printfcn = printscol; else if (f_longform) printfcn = printlong; else if (f_stream) printfcn = printstream; else printfcn = printcol; if (argc) traverse(argc, argv, fts_options); else traverse(1, dotav, fts_options); exit(rval); } static int output; /* If anything output. */ /* * Traverse() walks the logical directory structure specified by the argv list * in the order specified by the mastercmp() comparison function. During the * traversal it passes linked lists of structures to display() which represent * a superset (may be exact set) of the files to be displayed. */ static void traverse(int argc, char *argv[], int options) { FTS *ftsp; FTSENT *p, *chp; int ch_options; if ((ftsp = fts_open(argv, options, f_nosort ? NULL : mastercmp)) == NULL) err(1, "fts_open"); /* * We ignore errors from fts_children here since they will be * replicated and signalled on the next call to fts_read() below. */ chp = fts_children(ftsp, 0); if (chp != NULL) display(NULL, chp, options); if (f_listdir) return; /* * If not recursing down this tree and don't need stat info, just get * the names. */ ch_options = !f_recursive && !f_label && options & FTS_NOSTAT ? FTS_NAMEONLY : 0; while (errno = 0, (p = fts_read(ftsp)) != NULL) switch (p->fts_info) { case FTS_DC: warnx("%s: directory causes a cycle", p->fts_name); break; case FTS_DNR: case FTS_ERR: warnx("%s: %s", p->fts_path, strerror(p->fts_errno)); rval = 1; break; case FTS_D: if (p->fts_level != FTS_ROOTLEVEL && p->fts_name[0] == '.' && !f_listdot) break; /* * If already output something, put out a newline as * a separator. If multiple arguments, precede each * directory with its name. */ if (output) { putchar('\n'); (void)printname(p->fts_path); puts(":"); } else if (argc > 1) { (void)printname(p->fts_path); puts(":"); output = 1; } chp = fts_children(ftsp, ch_options); display(p, chp, options); if (!f_recursive && chp != NULL) (void)fts_set(ftsp, p, FTS_SKIP); break; default: break; } if (errno) err(1, "fts_read"); } /* * Display() takes a linked list of FTSENT structures and passes the list * along with any other necessary information to the print function. P * points to the parent directory of the display list. */ static void display(const FTSENT *p, FTSENT *list, int options) { struct stat *sp; DISPLAY d; FTSENT *cur; NAMES *np; off_t maxsize; long maxblock; uintmax_t maxinode; u_long btotal, labelstrlen, maxlen, maxnlink; u_long maxlabelstr; u_int sizelen; int maxflags; gid_t maxgroup; uid_t maxuser; size_t flen, ulen, glen; char *initmax; int entries, needstats; const char *user, *group; char *flags, *labelstr = NULL; char ngroup[STRBUF_SIZEOF(uid_t) + 1]; char nuser[STRBUF_SIZEOF(gid_t) + 1]; u_long width[9]; int i; needstats = f_inode || f_longform || f_size; flen = 0; btotal = 0; #define LS_COLWIDTHS_FIELDS 9 initmax = getenv("LS_COLWIDTHS"); for (i = 0 ; i < LS_COLWIDTHS_FIELDS; i++) width[i] = 0; if (initmax != NULL) { char *endp; for (i = 0; i < LS_COLWIDTHS_FIELDS && *initmax != '\0'; i++) { if (*initmax == ':') { width[i] = 0; } else { width[i] = strtoul(initmax, &endp, 10); initmax = endp; while (isspace(*initmax)) initmax++; if (*initmax != ':') break; initmax++; } } if (i < LS_COLWIDTHS_FIELDS) #ifdef COLORLS if (!f_color) #endif f_notabs = 0; } /* Fields match -lios order. New ones should be added at the end. */ maxinode = width[0]; maxblock = width[1]; maxnlink = width[2]; maxuser = width[3]; maxgroup = width[4]; maxflags = width[5]; maxsize = width[6]; maxlen = width[7]; maxlabelstr = width[8]; MAKENINES(maxinode); MAKENINES(maxblock); MAKENINES(maxnlink); MAKENINES(maxsize); d.s_size = 0; sizelen = 0; flags = NULL; for (cur = list, entries = 0; cur; cur = cur->fts_link) { if (cur->fts_info == FTS_ERR || cur->fts_info == FTS_NS) { warnx("%s: %s", cur->fts_name, strerror(cur->fts_errno)); cur->fts_number = NO_PRINT; rval = 1; continue; } /* * P is NULL if list is the argv list, to which different rules * apply. */ if (p == NULL) { /* Directories will be displayed later. */ if (cur->fts_info == FTS_D && !f_listdir) { cur->fts_number = NO_PRINT; continue; } } else { /* Only display dot file if -a/-A set. */ if (cur->fts_name[0] == '.' && !f_listdot) { cur->fts_number = NO_PRINT; continue; } } if (cur->fts_namelen > maxlen) maxlen = cur->fts_namelen; if (f_octal || f_octal_escape) { u_long t = len_octal(cur->fts_name, cur->fts_namelen); if (t > maxlen) maxlen = t; } if (needstats) { sp = cur->fts_statp; if (sp->st_blocks > maxblock) maxblock = sp->st_blocks; if (sp->st_ino > maxinode) maxinode = sp->st_ino; if (sp->st_nlink > maxnlink) maxnlink = sp->st_nlink; if (sp->st_size > maxsize) maxsize = sp->st_size; btotal += sp->st_blocks; if (f_longform) { if (f_numericonly) { (void)snprintf(nuser, sizeof(nuser), "%u", sp->st_uid); (void)snprintf(ngroup, sizeof(ngroup), "%u", sp->st_gid); user = nuser; group = ngroup; } else { user = user_from_uid(sp->st_uid, 0); /* * user_from_uid(..., 0) only returns * NULL in OOM conditions. We could * format the uid here, but (1) in * general ls(1) exits on OOM, and (2) * there is another allocation/exit * path directly below, which will * likely exit anyway. */ if (user == NULL) err(1, "user_from_uid"); group = group_from_gid(sp->st_gid, 0); /* Ditto. */ if (group == NULL) err(1, "group_from_gid"); } if ((ulen = strlen(user)) > maxuser) maxuser = ulen; if ((glen = strlen(group)) > maxgroup) maxgroup = glen; if (f_flags) { flags = fflagstostr(sp->st_flags); if (flags != NULL && *flags == '\0') { free(flags); flags = strdup("-"); } if (flags == NULL) err(1, "fflagstostr"); flen = strlen(flags); if (flen > (size_t)maxflags) maxflags = flen; } else flen = 0; labelstr = NULL; if (f_label) { char name[PATH_MAX + 1]; mac_t label; int error; error = mac_prepare_file_label(&label); if (error == -1) { warn("MAC label for %s/%s", cur->fts_parent->fts_path, cur->fts_name); goto label_out; } if (cur->fts_level == FTS_ROOTLEVEL) snprintf(name, sizeof(name), "%s", cur->fts_name); else snprintf(name, sizeof(name), "%s/%s", cur->fts_parent-> fts_accpath, cur->fts_name); if (options & FTS_LOGICAL) error = mac_get_file(name, label); else error = mac_get_link(name, label); if (error == -1) { warn("MAC label for %s/%s", cur->fts_parent->fts_path, cur->fts_name); mac_free(label); goto label_out; } error = mac_to_text(label, &labelstr); if (error == -1) { warn("MAC label for %s/%s", cur->fts_parent->fts_path, cur->fts_name); mac_free(label); goto label_out; } mac_free(label); label_out: if (labelstr == NULL) labelstr = strdup("-"); labelstrlen = strlen(labelstr); if (labelstrlen > maxlabelstr) maxlabelstr = labelstrlen; } else labelstrlen = 0; if ((np = malloc(sizeof(NAMES) + labelstrlen + ulen + glen + flen + 4)) == NULL) err(1, "malloc"); np->user = &np->data[0]; (void)strcpy(np->user, user); np->group = &np->data[ulen + 1]; (void)strcpy(np->group, group); if (S_ISCHR(sp->st_mode) || S_ISBLK(sp->st_mode)) { sizelen = snprintf(NULL, 0, "%#jx", (uintmax_t)sp->st_rdev); if (d.s_size < sizelen) d.s_size = sizelen; } if (f_flags) { np->flags = &np->data[ulen + glen + 2]; (void)strcpy(np->flags, flags); free(flags); } if (f_label) { np->label = &np->data[ulen + glen + 2 + (f_flags ? flen + 1 : 0)]; (void)strcpy(np->label, labelstr); free(labelstr); } cur->fts_pointer = np; } } ++entries; } /* * If there are no entries to display, we normally stop right * here. However, we must continue if we have to display the * total block count. In this case, we display the total only * on the second (p != NULL) pass. */ if (!entries && (!(f_longform || f_size) || p == NULL)) return; d.list = list; d.entries = entries; d.maxlen = maxlen; if (needstats) { d.btotal = btotal; - d.s_block = snprintf(NULL, 0, "%lu", howmany(maxblock, blocksize)); + d.s_block = snprintf(NULL, 0, f_thousands ? "%'ld" : "%ld", + howmany(maxblock, blocksize)); d.s_flags = maxflags; d.s_label = maxlabelstr; d.s_group = maxgroup; d.s_inode = snprintf(NULL, 0, "%ju", maxinode); d.s_nlink = snprintf(NULL, 0, "%lu", maxnlink); sizelen = f_humanval ? HUMANVALSTR_LEN : snprintf(NULL, 0, "%ju", maxsize); if (d.s_size < sizelen) d.s_size = sizelen; d.s_user = maxuser; } if (f_thousands) /* make space for commas */ d.s_size += (d.s_size - 1) / 3; printfcn(&d); output = 1; if (f_longform) for (cur = list; cur; cur = cur->fts_link) free(cur->fts_pointer); } /* * Ordering for mastercmp: * If ordering the argv (fts_level = FTS_ROOTLEVEL) return non-directories * as larger than directories. Within either group, use the sort function. * All other levels use the sort function. Error entries remain unsorted. */ static int mastercmp(const FTSENT * const *a, const FTSENT * const *b) { int a_info, b_info; a_info = (*a)->fts_info; if (a_info == FTS_ERR) return (0); b_info = (*b)->fts_info; if (b_info == FTS_ERR) return (0); if (a_info == FTS_NS || b_info == FTS_NS) return (namecmp(*a, *b)); if (a_info != b_info && (*a)->fts_level == FTS_ROOTLEVEL && !f_listdir) { if (a_info == FTS_D) return (1); if (b_info == FTS_D) return (-1); } return (sortfcn(*a, *b)); } diff --git a/bin/ls/print.c b/bin/ls/print.c index 3d6feff1fdb7..e67596c198ba 100644 --- a/bin/ls/print.c +++ b/bin/ls/print.c @@ -1,837 +1,835 @@ /*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1989, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Michael Fischbein. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if 0 #ifndef lint static char sccsid[] = "@(#)print.c 8.4 (Berkeley) 4/17/94"; #endif /* not lint */ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef COLORLS #include #include #include #endif #include "ls.h" #include "extern.h" static int printaname(const FTSENT *, u_long, u_long); static void printdev(size_t, dev_t); static void printlink(const FTSENT *); static void printtime(time_t); static int printtype(u_int); static void printsize(size_t, off_t); #ifdef COLORLS static void endcolor_termcap(int); static void endcolor_ansi(void); static void endcolor(int); static int colortype(mode_t); #endif static void aclmode(char *, const FTSENT *); #define IS_NOPRINT(p) ((p)->fts_number == NO_PRINT) #ifdef COLORLS /* Most of these are taken from */ typedef enum Colors { C_DIR, /* directory */ C_LNK, /* symbolic link */ C_SOCK, /* socket */ C_FIFO, /* pipe */ C_EXEC, /* executable */ C_BLK, /* block special */ C_CHR, /* character special */ C_SUID, /* setuid executable */ C_SGID, /* setgid executable */ C_WSDIR, /* directory writeble to others, with sticky * bit */ C_WDIR, /* directory writeble to others, without * sticky bit */ C_NUMCOLORS /* just a place-holder */ } Colors; static const char *defcolors = "exfxcxdxbxegedabagacad"; /* colors for file types */ static struct { int num[2]; bool bold; bool underline; } colors[C_NUMCOLORS]; #endif static size_t padding_for_month[12]; static size_t month_max_size = 0; void printscol(const DISPLAY *dp) { FTSENT *p; for (p = dp->list; p; p = p->fts_link) { if (IS_NOPRINT(p)) continue; (void)printaname(p, dp->s_inode, dp->s_block); (void)putchar('\n'); } } /* * print name in current style */ int printname(const char *name) { if (f_octal || f_octal_escape) return prn_octal(name); else if (f_nonprint) return prn_printable(name); else return prn_normal(name); } static const char * get_abmon(int mon) { switch (mon) { case 0: return (nl_langinfo(ABMON_1)); case 1: return (nl_langinfo(ABMON_2)); case 2: return (nl_langinfo(ABMON_3)); case 3: return (nl_langinfo(ABMON_4)); case 4: return (nl_langinfo(ABMON_5)); case 5: return (nl_langinfo(ABMON_6)); case 6: return (nl_langinfo(ABMON_7)); case 7: return (nl_langinfo(ABMON_8)); case 8: return (nl_langinfo(ABMON_9)); case 9: return (nl_langinfo(ABMON_10)); case 10: return (nl_langinfo(ABMON_11)); case 11: return (nl_langinfo(ABMON_12)); } /* should never happen */ abort(); } static size_t mbswidth(const char *month) { wchar_t wc; size_t width, donelen, clen, w; width = donelen = 0; while ((clen = mbrtowc(&wc, month + donelen, MB_LEN_MAX, NULL)) != 0) { if (clen == (size_t)-1 || clen == (size_t)-2) return (-1); donelen += clen; if ((w = wcwidth(wc)) == (size_t)-1) return (-1); width += w; } return (width); } static void compute_abbreviated_month_size(void) { int i; size_t width; size_t months_width[12]; for (i = 0; i < 12; i++) { width = mbswidth(get_abmon(i)); if (width == (size_t)-1) { month_max_size = -1; return; } months_width[i] = width; if (width > month_max_size) month_max_size = width; } for (i = 0; i < 12; i++) padding_for_month[i] = month_max_size - months_width[i]; } void printlong(const DISPLAY *dp) { struct stat *sp; FTSENT *p; NAMES *np; char buf[20]; #ifdef COLORLS int color_printed = 0; #endif if ((dp->list == NULL || dp->list->fts_level != FTS_ROOTLEVEL) && (f_longform || f_size)) { (void)printf("total %lu\n", howmany(dp->btotal, blocksize)); } for (p = dp->list; p; p = p->fts_link) { if (IS_NOPRINT(p)) continue; sp = p->fts_statp; if (f_inode) (void)printf("%*ju ", dp->s_inode, (uintmax_t)sp->st_ino); if (f_size) - (void)printf("%*jd ", + (void)printf(f_thousands ? "%'*jd " : "%*jd ", dp->s_block, howmany(sp->st_blocks, blocksize)); strmode(sp->st_mode, buf); aclmode(buf, p); np = p->fts_pointer; (void)printf("%s %*ju %-*s %-*s ", buf, dp->s_nlink, (uintmax_t)sp->st_nlink, dp->s_user, np->user, dp->s_group, np->group); if (f_flags) (void)printf("%-*s ", dp->s_flags, np->flags); if (f_label) (void)printf("%-*s ", dp->s_label, np->label); if (S_ISCHR(sp->st_mode) || S_ISBLK(sp->st_mode)) printdev(dp->s_size, sp->st_rdev); else printsize(dp->s_size, sp->st_size); if (f_accesstime) printtime(sp->st_atime); else if (f_birthtime) printtime(sp->st_birthtime); else if (f_statustime) printtime(sp->st_ctime); else printtime(sp->st_mtime); #ifdef COLORLS if (f_color) color_printed = colortype(sp->st_mode); #endif (void)printname(p->fts_name); #ifdef COLORLS if (f_color && color_printed) endcolor(0); #endif if (f_type) (void)printtype(sp->st_mode); if (S_ISLNK(sp->st_mode)) printlink(p); (void)putchar('\n'); } } void printstream(const DISPLAY *dp) { FTSENT *p; int chcnt; for (p = dp->list, chcnt = 0; p; p = p->fts_link) { if (p->fts_number == NO_PRINT) continue; /* XXX strlen does not take octal escapes into account. */ if (strlen(p->fts_name) + chcnt + (p->fts_link ? 2 : 0) >= (unsigned)termwidth) { putchar('\n'); chcnt = 0; } chcnt += printaname(p, dp->s_inode, dp->s_block); if (p->fts_link) { printf(", "); chcnt += 2; } } if (chcnt) putchar('\n'); } void printcol(const DISPLAY *dp) { static FTSENT **array; static int lastentries = -1; FTSENT *p; FTSENT **narray; int base; int chcnt; int cnt; int col; int colwidth; int endcol; int num; int numcols; int numrows; int row; int tabwidth; if (f_notabs) tabwidth = 1; else tabwidth = 8; /* * Have to do random access in the linked list -- build a table * of pointers. */ if (dp->entries > lastentries) { if ((narray = realloc(array, dp->entries * sizeof(FTSENT *))) == NULL) { warn(NULL); printscol(dp); return; } lastentries = dp->entries; array = narray; } for (p = dp->list, num = 0; p; p = p->fts_link) if (p->fts_number != NO_PRINT) array[num++] = p; colwidth = dp->maxlen; if (f_inode) colwidth += dp->s_inode + 1; if (f_size) colwidth += dp->s_block + 1; if (f_type) colwidth += 1; colwidth = (colwidth + tabwidth) & ~(tabwidth - 1); if (termwidth < 2 * colwidth) { printscol(dp); return; } numcols = termwidth / colwidth; numrows = num / numcols; if (num % numcols) ++numrows; if ((dp->list == NULL || dp->list->fts_level != FTS_ROOTLEVEL) && (f_longform || f_size)) { (void)printf("total %lu\n", howmany(dp->btotal, blocksize)); } base = 0; for (row = 0; row < numrows; ++row) { endcol = colwidth; if (!f_sortacross) base = row; for (col = 0, chcnt = 0; col < numcols; ++col) { chcnt += printaname(array[base], dp->s_inode, dp->s_block); if (f_sortacross) base++; else base += numrows; if (base >= num) break; while ((cnt = ((chcnt + tabwidth) & ~(tabwidth - 1))) <= endcol) { if (f_sortacross && col + 1 >= numcols) break; (void)putchar(f_notabs ? ' ' : '\t'); chcnt = cnt; } endcol += colwidth; } (void)putchar('\n'); } } /* * print [inode] [size] name * return # of characters printed, no trailing characters. */ static int printaname(const FTSENT *p, u_long inodefield, u_long sizefield) { struct stat *sp; int chcnt; #ifdef COLORLS int color_printed = 0; #endif sp = p->fts_statp; chcnt = 0; if (f_inode) chcnt += printf("%*ju ", (int)inodefield, (uintmax_t)sp->st_ino); if (f_size) - chcnt += printf("%*jd ", + chcnt += printf(f_thousands ? "%'*jd " : "%*jd ", (int)sizefield, howmany(sp->st_blocks, blocksize)); #ifdef COLORLS if (f_color) color_printed = colortype(sp->st_mode); #endif chcnt += printname(p->fts_name); #ifdef COLORLS if (f_color && color_printed) endcolor(0); #endif if (f_type) chcnt += printtype(sp->st_mode); return (chcnt); } /* * Print device special file major and minor numbers. */ static void printdev(size_t width, dev_t dev) { (void)printf("%#*jx ", (u_int)width, (uintmax_t)dev); } static void ls_strftime(char *str, size_t len, const char *fmt, const struct tm *tm) { char *posb, nfmt[BUFSIZ]; const char *format = fmt; if ((posb = strstr(fmt, "%b")) != NULL) { if (month_max_size == 0) { compute_abbreviated_month_size(); } if (month_max_size > 0 && tm != NULL) { snprintf(nfmt, sizeof(nfmt), "%.*s%s%*s%s", (int)(posb - fmt), fmt, get_abmon(tm->tm_mon), (int)padding_for_month[tm->tm_mon], "", posb + 2); format = nfmt; } } if (tm != NULL) strftime(str, len, format, tm); else strlcpy(str, "bad date val", len); } static void printtime(time_t ftime) { char longstring[80]; static time_t now = 0; const char *format; static int d_first = -1; if (d_first < 0) d_first = (*nl_langinfo(D_MD_ORDER) == 'd'); if (now == 0) now = time(NULL); #define SIXMONTHS ((365 / 2) * 86400) if (f_timeformat) /* user specified format */ format = f_timeformat; else if (f_sectime) /* mmm dd hh:mm:ss yyyy || dd mmm hh:mm:ss yyyy */ format = d_first ? "%e %b %T %Y" : "%b %e %T %Y"; else if (ftime + SIXMONTHS > now && ftime < now + SIXMONTHS) /* mmm dd hh:mm || dd mmm hh:mm */ format = d_first ? "%e %b %R" : "%b %e %R"; else /* mmm dd yyyy || dd mmm yyyy */ format = d_first ? "%e %b %Y" : "%b %e %Y"; ls_strftime(longstring, sizeof(longstring), format, localtime(&ftime)); fputs(longstring, stdout); fputc(' ', stdout); } static int printtype(u_int mode) { if (f_slash) { if ((mode & S_IFMT) == S_IFDIR) { (void)putchar('/'); return (1); } return (0); } switch (mode & S_IFMT) { case S_IFDIR: (void)putchar('/'); return (1); case S_IFIFO: (void)putchar('|'); return (1); case S_IFLNK: (void)putchar('@'); return (1); case S_IFSOCK: (void)putchar('='); return (1); case S_IFWHT: (void)putchar('%'); return (1); default: break; } if (mode & (S_IXUSR | S_IXGRP | S_IXOTH)) { (void)putchar('*'); return (1); } return (0); } #ifdef COLORLS static int putch(int c) { (void)putchar(c); return 0; } static int writech(int c) { char tmp = (char)c; (void)write(STDOUT_FILENO, &tmp, 1); return 0; } static void printcolor_termcap(Colors c) { char *ansiseq; if (colors[c].bold) tputs(enter_bold, 1, putch); if (colors[c].underline) tputs(enter_underline, 1, putch); if (colors[c].num[0] != -1) { ansiseq = tgoto(ansi_fgcol, 0, colors[c].num[0]); if (ansiseq) tputs(ansiseq, 1, putch); } if (colors[c].num[1] != -1) { ansiseq = tgoto(ansi_bgcol, 0, colors[c].num[1]); if (ansiseq) tputs(ansiseq, 1, putch); } } static void printcolor_ansi(Colors c) { printf("\033["); if (colors[c].bold) printf("1"); if (colors[c].underline) printf(";4"); if (colors[c].num[0] != -1) printf(";3%d", colors[c].num[0]); if (colors[c].num[1] != -1) printf(";4%d", colors[c].num[1]); printf("m"); } static void printcolor(Colors c) { if (explicitansi) printcolor_ansi(c); else printcolor_termcap(c); } static void endcolor_termcap(int sig) { tputs(ansi_coloff, 1, sig ? writech : putch); tputs(attrs_off, 1, sig ? writech : putch); } static void endcolor_ansi(void) { printf("\33[m"); } static void endcolor(int sig) { if (explicitansi) endcolor_ansi(); else endcolor_termcap(sig); } static int colortype(mode_t mode) { switch (mode & S_IFMT) { case S_IFDIR: if (mode & S_IWOTH) if (mode & S_ISTXT) printcolor(C_WSDIR); else printcolor(C_WDIR); else printcolor(C_DIR); return (1); case S_IFLNK: printcolor(C_LNK); return (1); case S_IFSOCK: printcolor(C_SOCK); return (1); case S_IFIFO: printcolor(C_FIFO); return (1); case S_IFBLK: printcolor(C_BLK); return (1); case S_IFCHR: printcolor(C_CHR); return (1); default:; } if (mode & (S_IXUSR | S_IXGRP | S_IXOTH)) { if (mode & S_ISUID) printcolor(C_SUID); else if (mode & S_ISGID) printcolor(C_SGID); else printcolor(C_EXEC); return (1); } return (0); } void parsecolors(const char *cs) { int i; int j; size_t len; char c[2]; short legacy_warn = 0; if (cs == NULL) cs = ""; /* LSCOLORS not set */ len = strlen(cs); for (i = 0; i < (int)C_NUMCOLORS; i++) { colors[i].bold = false; colors[i].underline = false; if (len <= 2 * (size_t)i) { c[0] = defcolors[2 * i]; c[1] = defcolors[2 * i + 1]; } else { c[0] = cs[2 * i]; c[1] = cs[2 * i + 1]; } for (j = 0; j < 2; j++) { /* Legacy colours used 0-7 */ if (c[j] >= '0' && c[j] <= '7') { colors[i].num[j] = c[j] - '0'; if (!legacy_warn) { warnx("LSCOLORS should use " "characters a-h instead of 0-9 (" "see the manual page)"); } legacy_warn = 1; } else if (c[j] >= 'a' && c[j] <= 'h') colors[i].num[j] = c[j] - 'a'; else if (c[j] >= 'A' && c[j] <= 'H') { colors[i].num[j] = c[j] - 'A'; if (j == 1) colors[i].underline = true; else colors[i].bold = true; } else if (tolower((unsigned char)c[j]) == 'x') { if (j == 1 && c[j] == 'X') colors[i].underline = true; colors[i].num[j] = -1; } else { warnx("invalid character '%c' in LSCOLORS" " env var", c[j]); colors[i].num[j] = -1; } } } } void colorquit(int sig) { endcolor(sig); (void)signal(sig, SIG_DFL); (void)kill(getpid(), sig); } #endif /* COLORLS */ static void printlink(const FTSENT *p) { int lnklen; char name[MAXPATHLEN + 1]; char path[MAXPATHLEN + 1]; if (p->fts_level == FTS_ROOTLEVEL) (void)snprintf(name, sizeof(name), "%s", p->fts_name); else (void)snprintf(name, sizeof(name), "%s/%s", p->fts_parent->fts_accpath, p->fts_name); if ((lnklen = readlink(name, path, sizeof(path) - 1)) == -1) { (void)fprintf(stderr, "\nls: %s: %s\n", name, strerror(errno)); return; } path[lnklen] = '\0'; (void)printf(" -> "); (void)printname(path); } static void printsize(size_t width, off_t bytes) { if (f_humanval) { /* * Reserve one space before the size and allocate room for * the trailing '\0'. */ char buf[HUMANVALSTR_LEN - 1 + 1]; humanize_number(buf, sizeof(buf), (int64_t)bytes, "", HN_AUTOSCALE, HN_B | HN_NOSPACE | HN_DECIMAL); (void)printf("%*s ", (u_int)width, buf); - } else if (f_thousands) { /* with commas */ - /* This format assignment needed to work round gcc bug. */ - const char *format = "%*j'd "; - (void)printf(format, (u_int)width, bytes); - } else - (void)printf("%*jd ", (u_int)width, bytes); + } else { + (void)printf(f_thousands ? "%'*jd " : "%*jd ", + (u_int)width, bytes); + } } /* * Add a + after the standard rwxrwxrwx mode if the file has an * ACL. strmode() reserves space at the end of the string. */ static void aclmode(char *buf, const FTSENT *p) { char name[MAXPATHLEN + 1]; int ret, trivial; static dev_t previous_dev = NODEV; static int supports_acls = -1; static int type = ACL_TYPE_ACCESS; acl_t facl; /* * XXX: ACLs are not supported on whiteouts and device files * residing on UFS. */ if (S_ISCHR(p->fts_statp->st_mode) || S_ISBLK(p->fts_statp->st_mode) || S_ISWHT(p->fts_statp->st_mode)) return; if (previous_dev == p->fts_statp->st_dev && supports_acls == 0) return; if (p->fts_level == FTS_ROOTLEVEL) snprintf(name, sizeof(name), "%s", p->fts_name); else snprintf(name, sizeof(name), "%s/%s", p->fts_parent->fts_accpath, p->fts_name); if (previous_dev != p->fts_statp->st_dev) { previous_dev = p->fts_statp->st_dev; supports_acls = 0; ret = lpathconf(name, _PC_ACL_NFS4); if (ret > 0) { type = ACL_TYPE_NFS4; supports_acls = 1; } else if (ret < 0 && errno != EINVAL) { warn("%s", name); return; } if (supports_acls == 0) { ret = lpathconf(name, _PC_ACL_EXTENDED); if (ret > 0) { type = ACL_TYPE_ACCESS; supports_acls = 1; } else if (ret < 0 && errno != EINVAL) { warn("%s", name); return; } } } if (supports_acls == 0) return; facl = acl_get_link_np(name, type); if (facl == NULL) { warn("%s", name); return; } if (acl_is_trivial_np(facl, &trivial)) { acl_free(facl); warn("%s", name); return; } if (!trivial) buf[10] = '+'; acl_free(facl); } diff --git a/bin/ls/tests/ls_tests.sh b/bin/ls/tests/ls_tests.sh index 682682691b7a..780376b9de3c 100755 --- a/bin/ls/tests/ls_tests.sh +++ b/bin/ls/tests/ls_tests.sh @@ -1,980 +1,996 @@ # # Copyright 2015 EMC Corp. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # create_test_dir() { [ -z "$ATF_TMPDIR" ] || return 0 export ATF_TMPDIR=$(pwd) # XXX: need to nest this because of how kyua creates $TMPDIR; otherwise # it will run into EPERM issues later TEST_INPUTS_DIR="${ATF_TMPDIR}/test/inputs" atf_check -e empty -s exit:0 mkdir -m 0777 -p $TEST_INPUTS_DIR cd $TEST_INPUTS_DIR } create_test_inputs() { create_test_dir atf_check -e empty -s exit:0 mkdir -m 0755 -p a/b/1 atf_check -e empty -s exit:0 ln -s a/b c atf_check -e empty -s exit:0 touch d atf_check -e empty -s exit:0 ln d e atf_check -e empty -s exit:0 touch .f atf_check -e empty -s exit:0 mkdir .g atf_check -e empty -s exit:0 mkfifo h atf_check -e ignore -s exit:0 dd if=/dev/zero of=i count=1000 bs=1 atf_check -e empty -s exit:0 touch klmn atf_check -e empty -s exit:0 touch opqr atf_check -e empty -s exit:0 touch stuv atf_check -e empty -s exit:0 install -m 0755 /dev/null wxyz atf_check -e empty -s exit:0 touch 0b00000001 atf_check -e empty -s exit:0 touch 0b00000010 atf_check -e empty -s exit:0 touch 0b00000011 atf_check -e empty -s exit:0 touch 0b00000100 atf_check -e empty -s exit:0 touch 0b00000101 atf_check -e empty -s exit:0 touch 0b00000110 atf_check -e empty -s exit:0 touch 0b00000111 atf_check -e empty -s exit:0 touch 0b00001000 atf_check -e empty -s exit:0 touch 0b00001001 atf_check -e empty -s exit:0 touch 0b00001010 atf_check -e empty -s exit:0 touch 0b00001011 atf_check -e empty -s exit:0 touch 0b00001100 atf_check -e empty -s exit:0 touch 0b00001101 atf_check -e empty -s exit:0 touch 0b00001110 atf_check -e empty -s exit:0 touch 0b00001111 } KB=1024 MB=$(( 1024 * $KB )) GB=$(( 1024 * $MB )) TB=$(( 1024 * $GB )) PB=$(( 1024 * $TB )) create_test_inputs2() { create_test_dir if ! getconf MIN_HOLE_SIZE "$(pwd)"; then echo "getconf MIN_HOLE_SIZE $(pwd) failed; sparse files probably" \ "not supported by file system" mount atf_skip "Test's work directory does not support sparse files;" \ "try with a different TMPDIR?" fi for filesize in 1 512 $(( 2 * $KB )) $(( 10 * $KB )) $(( 512 * $KB )); \ do atf_check -e ignore -o empty -s exit:0 \ dd if=/dev/zero of=${filesize}.file bs=1 \ count=1 oseek=${filesize} conv=sparse files="${files} ${filesize}.file" done for filesize in $MB $GB $TB; do atf_check -e ignore -o empty -s exit:0 \ dd if=/dev/zero of=${filesize}.file bs=$MB \ count=1 oseek=$(( $filesize / $MB )) conv=sparse files="${files} ${filesize}.file" done } atf_test_case A_flag A_flag_head() { atf_set "descr" "Verify -A support with unprivileged users" } A_flag_body() { create_test_dir atf_check -e empty -o empty -s exit:0 ls -A create_test_inputs WITH_A=$PWD/../with_A.out WITHOUT_A=$PWD/../without_A.out atf_check -e empty -o save:$WITH_A -s exit:0 ls -A atf_check -e empty -o save:$WITHOUT_A -s exit:0 ls echo "-A usage" cat $WITH_A echo "No -A usage" cat $WITHOUT_A for dot_path in '\.f' '\.g'; do atf_check -e empty -o not-empty -s exit:0 grep "${dot_path}" \ $WITH_A atf_check -e empty -o empty -s not-exit:0 grep "${dot_path}" \ $WITHOUT_A done } atf_test_case A_flag_implied_when_root A_flag_implied_when_root_head() { atf_set "descr" "Verify that -A is implied for root" atf_set "require.user" "root" } A_flag_implied_when_root_body() { create_test_dir atf_check -e empty -o empty -s exit:0 ls -A create_test_inputs WITH_EXPLICIT=$PWD/../with_explicit_A.out WITH_IMPLIED=$PWD/../with_implied_A.out atf_check -e empty -o save:$WITH_EXPLICIT -s exit:0 ls -A atf_check -e empty -o save:$WITH_IMPLIED -s exit:0 ls echo "Explicit -A usage" cat $WITH_EXPLICIT echo "Implicit -A usage" cat $WITH_IMPLIED atf_check_equal "$(cat $WITH_EXPLICIT)" "$(cat $WITH_IMPLIED)" } atf_test_case B_flag B_flag_head() { atf_set "descr" "Verify that the output from ls -B prints out non-printable characters" } B_flag_body() { atf_check -e empty -o empty -s exit:0 touch "$(printf "y\013z")" atf_check -e empty -o match:'y\\013z' -s exit:0 ls -B } atf_test_case C_flag C_flag_head() { atf_set "descr" "Verify that the output from ls -C is multi-column, sorted down" } print_index() { local i=1 local wanted_index=$1; shift while [ $i -le $wanted_index ]; do if [ $i -eq $wanted_index ]; then echo $1 return fi shift : $(( i += 1 )) done } C_flag_body() { create_test_inputs WITH_C=$PWD/../with_C.out export COLUMNS=40 atf_check -e empty -o save:$WITH_C -s exit:0 ls -C echo "With -C usage" cat $WITH_C paths=$(find -s . -mindepth 1 -maxdepth 1 \! -name '.*' -exec basename {} \; ) set -- $paths num_paths=$# num_columns=2 max_num_paths_per_column=$(( $(( $num_paths + 1 )) / $num_columns )) local i=1 while [ $i -le $max_num_paths_per_column ]; do column_1=$(print_index $i $paths) column_2=$(print_index $(( $i + $max_num_paths_per_column )) $paths) #echo "paths[$(( $i + $max_num_paths_per_column ))] = $column_2" expected_expr="$column_1" if [ -n "$column_2" ]; then expected_expr="$expected_expr[[:space:]]+$column_2" fi atf_check -e ignore -o not-empty -s exit:0 \ egrep "$expected_expr" $WITH_C : $(( i += 1 )) done } atf_test_case D_flag D_flag_head() { atf_set "descr" "Verify that the output from ls -D modifies the time format used with ls -l" } D_flag_body() { atf_check -e empty -o empty -s exit:0 touch a.file atf_check -e empty -o match:"$(stat -f '%c[[:space:]]+%N' a.file)" \ -s exit:0 ls -lD '%s' } atf_test_case F_flag F_flag_head() { atf_set "descr" "Verify that the output from ls -F prints out appropriate symbols after files" } F_flag_body() { create_test_inputs atf_check -e empty -s exit:0 \ sh -c "pid=${ATF_TMPDIR}/nc.pid; daemon -p \$pid nc -lU j; sleep 2; pkill -F \$pid" atf_check -e empty -o match:'a/' -s exit:0 ls -F atf_check -e empty -o match:'c@' -s exit:0 ls -F atf_check -e empty -o match:'h\|' -s exit:0 ls -F atf_check -e empty -o match:'j=' -s exit:0 ls -F #atf_check -e empty -o match:'%' -s exit:0 ls -F atf_check -e empty -o match:'stuv' -s exit:0 ls -F atf_check -e empty -o match:'wxyz\*' -s exit:0 ls -F } atf_test_case H_flag H_flag_head() { atf_set "descr" "Verify that ls -H follows symlinks" } H_flag_body() { create_test_inputs atf_check -e empty -o match:'1' -s exit:0 ls -H c } atf_test_case I_flag I_flag_head() { atf_set "descr" "Verify that the output from ls -I is the same as ls for an unprivileged user" } I_flag_body() { create_test_inputs WITH_I=$PWD/../with_I.out WITHOUT_I=$PWD/../without_I.out atf_check -e empty -o save:$WITH_I -s exit:0 ls -I atf_check -e empty -o save:$WITHOUT_I -s exit:0 ls echo "Explicit -I usage" cat $WITH_I echo "No -I usage" cat $WITHOUT_I atf_check_equal "$(cat $WITH_I)" "$(cat $WITHOUT_I)" } atf_test_case I_flag_voids_implied_A_flag_when_root I_flag_voids_implied_A_flag_when_root_head() { atf_set "descr" "Verify that -I voids out implied -A for root" atf_set "require.user" "root" } I_flag_voids_implied_A_flag_when_root_body() { create_test_inputs atf_check -o not-match:'\.f' -s exit:0 ls -I atf_check -o not-match:'\.g' -s exit:0 ls -I atf_check -o match:'\.f' -s exit:0 ls -A -I atf_check -o match:'\.g' -s exit:0 ls -A -I } atf_test_case L_flag L_flag_head() { atf_set "descr" "Verify that -L prints out the symbolic link and conversely -P prints out the target for the symbolic link" } L_flag_body() { atf_check -e empty -o empty -s exit:0 ln -s target1/target2 link1 atf_check -e empty -o match:link1 -s exit:0 ls -L atf_check -e empty -o not-match:target1/target2 -s exit:0 ls -L } atf_test_case R_flag R_flag_head() { atf_set "descr" "Verify that the output from ls -R prints out the directory contents recursively" } R_flag_body() { create_test_inputs WITH_R=$PWD/../with_R.out WITH_R_expected_output=$PWD/../with_R_expected.out atf_check -e empty -o save:$WITH_R -s exit:0 ls -R set -- . $(find -s . \! -name '.*' -type d) while [ $# -gt 0 ]; do dir=$1; shift [ "$dir" != "." ] && echo "$dir:" (cd $dir && ls -1A | sed -e '/^\./d') [ $# -ne 0 ] && echo done > $WITH_R_expected_output echo "-R usage" cat $WITH_R echo "-R expected output" cat $WITH_R_expected_output atf_check_equal "$(cat $WITH_R)" "$(cat $WITH_R_expected_output)" } atf_test_case S_flag S_flag_head() { atf_set "descr" "Verify that -S sorts by file size, then by filename lexicographically" } S_flag_body() { create_test_dir file_list_dir=$PWD/../files atf_check -e empty -o empty -s exit:0 mkdir -p $file_list_dir create_test_inputs create_test_inputs2 WITH_S=$PWD/../with_S.out WITHOUT_S=$PWD/../without_S.out atf_check -e empty -o save:$WITH_S ls -D '%s' -lS atf_check -e empty -o save:$WITHOUT_S ls -D '%s' -l WITH_S_parsed=$(awk '! /^total/ { print $7 }' $WITH_S) set -- $(awk '! /^total/ { print $5, $7 }' $WITHOUT_S) while [ $# -gt 0 ]; do size=$1; shift filename=$1; shift echo $filename >> $file_list_dir/${size} done file_lists=$(find $file_list_dir -type f -exec basename {} \; | sort -nr) WITHOUT_S_parsed=$(for file_list in $file_lists; do sort < $file_list_dir/$file_list; done) echo "-lS usage (parsed)" echo "$WITH_S_parsed" echo "-l usage (parsed)" echo "$WITHOUT_S_parsed" atf_check_equal "$WITHOUT_S_parsed" "$WITH_S_parsed" } atf_test_case T_flag T_flag_head() { atf_set "descr" "Verify -T support" } T_flag_body() { create_test_dir atf_check -e empty -o empty -s exit:0 touch a.file mtime_in_secs=$(stat -f %m -t %s a.file) mtime=$(date -j -f %s $mtime_in_secs +"[[:space:]]+%b[[:space:]]+%e[[:space:]]+%H:%M:%S[[:space:]]+%Y") atf_check -e empty -o match:"$mtime"'[[:space:]]+a\.file' \ -s exit:0 ls -lT a.file } atf_test_case a_flag a_flag_head() { atf_set "descr" "Verify -a support" } a_flag_body() { create_test_dir # Make sure "." and ".." show up with -a atf_check -e empty -o match:'\.[[:space:]]+\.\.' -s exit:0 ls -ax create_test_inputs WITH_a=$PWD/../with_a.out WITHOUT_a=$PWD/../without_a.out atf_check -e empty -o save:$WITH_a -s exit:0 ls -a atf_check -e empty -o save:$WITHOUT_a -s exit:0 ls echo "-a usage" cat $WITH_a echo "No -a usage" cat $WITHOUT_a for dot_path in '\.f' '\.g'; do atf_check -e empty -o not-empty -s exit:0 grep "${dot_path}" \ $WITH_a atf_check -e empty -o empty -s not-exit:0 grep "${dot_path}" \ $WITHOUT_a done } atf_test_case b_flag b_flag_head() { atf_set "descr" "Verify that the output from ls -b prints out non-printable characters" } b_flag_body() { atf_check -e empty -o empty -s exit:0 touch "$(printf "y\013z")" atf_check -e empty -o match:'y\\vz' -s exit:0 ls -b } atf_test_case d_flag d_flag_head() { atf_set "descr" "Verify that -d doesn't descend down directories" } d_flag_body() { create_test_dir output=$PWD/../output atf_check -e empty -o empty -s exit:0 mkdir -p a/b for path in . $PWD a; do atf_check -e empty -o save:$output -s exit:0 ls -d $path atf_check_equal "$(cat $output)" "$path" done } atf_test_case f_flag f_flag_head() { atf_set "descr" "Verify that -f prints out the contents of a directory unsorted" } f_flag_body() { create_test_inputs output=$PWD/../output # XXX: I don't have enough understanding of how the algorithm works yet # to determine more than the fact that all the entries printed out # exist paths=$(find -s . -mindepth 1 -maxdepth 1 \! -name '.*' -exec basename {} \; ) atf_check -e empty -o save:$output -s exit:0 ls -f for path in $paths; do atf_check -e ignore -o not-empty -s exit:0 \ egrep "^$path$" $output done } atf_test_case g_flag g_flag_head() { atf_set "descr" "Verify that -g does nothing (compatibility flag)" } g_flag_body() { create_test_inputs2 for file in $files; do atf_check -e empty -o match:"$(ls -a $file)" -s exit:0 \ ls -ag $file atf_check -e empty -o match:"$(ls -la $file)" -s exit:0 \ ls -alg $file done } atf_test_case h_flag h_flag_head() { atf_set "descr" "Verify that -h prints out the humanized units for file sizes with ls -l" atf_set "require.progs" "bc" } h_flag_body() { # XXX: this test doesn't currently show how 999 bytes will be 999B, # but 1000 bytes will be 1.0K, due to how humanize_number(3) works. create_test_inputs2 for file in $files; do file_size=$(stat -f '%z' "$file") || \ atf_fail "stat'ing $file failed" scale=2 if [ $file_size -lt $KB ]; then divisor=1 scale=0 suffix=B elif [ $file_size -lt $MB ]; then divisor=$KB suffix=K elif [ $file_size -lt $GB ]; then divisor=$MB suffix=M elif [ $file_size -lt $TB ]; then divisor=$GB suffix=G elif [ $file_size -lt $PB ]; then divisor=$TB suffix=T else divisor=$PB suffix=P fi bc_expr="$(printf "scale=%s\n%s/%s\nquit" $scale $file_size $divisor)" size_humanized=$(bc -e "$bc_expr" | tr '.' '\.' | sed -e 's,\.00,,') atf_check -e empty -o match:"$size_humanized.+$file" \ -s exit:0 ls -hl $file done } atf_test_case i_flag i_flag_head() { atf_set "descr" "Verify that -i prints out the inode for files" } i_flag_body() { create_test_inputs paths=$(find -L . -mindepth 1) [ -n "$paths" ] || atf_skip 'Could not find any paths to iterate over (!)' for path in $paths; do atf_check -e empty \ -o match:"$(stat -f '[[:space:]]*%i[[:space:]]+%N' $path)" \ -s exit:0 ls -d1i $path done } atf_test_case k_flag k_flag_head() { atf_set "descr" "Verify that -k prints out the size with a block size of 1kB" } k_flag_body() { create_test_inputs2 for file in $files; do atf_check -e empty \ -o match:"[[:space:]]+$(stat -f "%z" $file)[[:space:]]+.+[[:space:]]+$file" ls -lk $file done } atf_test_case l_flag l_flag_head() { atf_set "descr" "Verify that -l prints out the output in long format" } l_flag_body() { atf_check -e empty -o empty -s exit:0 touch a.file mtime_in_secs=$(stat -f "%m" -t "%s" a.file) mtime=$(date -j -f "%s" $mtime_in_secs +"%b[[:space:]]+%e[[:space:]]+%H:%M") expected_output=$(stat -f "%Sp[[:space:]]+%l[[:space:]]+%Su[[:space:]]+%Sg[[:space:]]+%z[[:space:]]+$mtime[[:space:]]+a\\.file" a.file) atf_check -e empty -o match:"$expected_output" -s exit:0 ls -l a.file } atf_test_case lcomma_flag lcomma_flag_head() { atf_set "descr" "Verify that -l, prints out the size with ',' delimiters" } lcomma_flag_body() { create_test_inputs atf_check \ -o match:'\-rw\-r\-\-r\-\-[[:space:]]+.+[[:space:]]+1,000[[:space:]]+.+i' \ env LC_ALL=en_US.ISO8859-1 ls -l, i } atf_test_case m_flag m_flag_head() { atf_set "descr" "Verify that the output from ls -m is comma-separated" } m_flag_body() { create_test_dir output=$PWD/../output atf_check -e empty -o empty -s exit:0 touch ,, "a,b " c d e atf_check -e empty -o save:$output -s exit:0 ls -m atf_check_equal "$(cat $output)" ",,, a,b , c, d, e" } atf_test_case n_flag n_flag_head() { atf_set "descr" "Verify that the output from ls -n prints out numeric GIDs/UIDs instead of symbolic GIDs/UIDs" atf_set "require.user" "root" } n_flag_body() { daemon_gid=$(id -g daemon) || atf_skip "could not resolve gid for daemon (!)" nobody_uid=$(id -u nobody) || atf_skip "could not resolve uid for nobody (!)" atf_check -e empty -o empty -s exit:0 touch a.file atf_check -e empty -o empty -s exit:0 chown $nobody_uid:$daemon_gid a.file atf_check -e empty \ -o match:'\-rw\-r\-\-r\-\-[[:space:]]+1[[:space:]]+'"$nobody_uid[[:space:]]+$daemon_gid"'[[:space:]]+.+a\.file' \ ls -ln a.file } atf_test_case o_flag o_flag_head() { atf_set "descr" "Verify that the output from ls -o prints out the chflag values or '-' if none are set" } o_flag_body() { local size=12345 create_test_dir atf_check -e ignore -o empty -s exit:0 dd if=/dev/zero of=a.file \ bs=$size count=1 atf_check -e ignore -o empty -s exit:0 dd if=/dev/zero of=b.file \ bs=$size count=1 atf_check -e empty -o empty -s exit:0 chflags uarch a.file atf_check -e empty -o empty -s exit:0 chflags 0 b.file atf_check -e empty -o match:"[[:space:]]+uarch[[:space:]]$size+.+a\\.file" \ -s exit:0 ls -lo a.file atf_check -e empty -o match:"[[:space:]]+\\-[[:space:]]$size+.+b\\.file" \ -s exit:0 ls -lo b.file } atf_test_case p_flag p_flag_head() { atf_set "descr" "Verify that the output from ls -p prints out '/' after directories" } p_flag_body() { create_test_inputs paths=$(find -L .) [ -n "$paths" ] || atf_skip 'Could not find any paths to iterate over (!)' for path in $paths; do suffix= # If path is not a symlink and is a directory, then the suffix # must be "/". if [ ! -L "${path}" -a -d "$path" ]; then suffix=/ fi atf_check -e empty -o match:"$path${suffix}" -s exit:0 \ ls -dp $path done } atf_test_case q_flag_and_w_flag q_flag_and_w_flag_head() { atf_set "descr" "Verify that the output from ls -q prints out '?' for ESC and ls -w prints out the escape character" } q_flag_and_w_flag_body() { create_test_dir test_file="$(printf "y\01z")" atf_check -e empty -o empty -s exit:0 touch "$test_file" atf_check -e empty -o match:'y\?z' -s exit:0 ls -q "$test_file" atf_check -e empty -o match:"$test_file" -s exit:0 ls -w "$test_file" } atf_test_case r_flag r_flag_head() { atf_set "descr" "Verify that the output from ls -r sorts the same way as reverse sorting with sort(1)" } r_flag_body() { create_test_inputs WITH_r=$PWD/../with_r.out WITH_sort=$PWD/../with_sort.out atf_check -e empty -o save:$WITH_r -s exit:0 ls -1r atf_check -e empty -o save:$WITH_sort -s exit:0 sh -c 'ls -1 | sort -r' echo "Sorted with -r" cat $WITH_r echo "Reverse sorted with sort(1)" cat $WITH_sort atf_check_equal "$(cat $WITH_r)" "$(cat $WITH_sort)" } atf_test_case s_flag s_flag_head() { atf_set "descr" "Verify that the output from ls -s matches the output from stat(1)" } s_flag_body() { create_test_inputs2 for file in $files; do atf_check -e empty \ -o match:"$(stat -f "%b" $file)[[:space:]]+$file" ls -s $file done } +atf_test_case scomma_flag +scomma_flag_head() +{ + atf_set "descr" "Verify that -s, prints out the size with ',' delimiters" +} + +scomma_flag_body() +{ + export LC_ALL=en_US.UTF-8 + atf_check -e ignore dd if=/dev/urandom of=file bs=65536 count=64 + blocks=$(stat -f "%b" file) + cblocks=$(printf "%'d" $blocks) + atf_check -e empty -o match:"$cblocks[[:space:]]+file" ls -s, file +} + atf_test_case t_flag t_flag_head() { atf_set "descr" "Verify that the output from ls -t sorts by modification time" } t_flag_body() { create_test_dir atf_check -e empty -o empty -s exit:0 touch a.file atf_check -e empty -o empty -s exit:0 touch b.file atf_check -e empty -o match:'a\.file' -s exit:0 sh -c 'ls -lt | tail -n 1' atf_check -e empty -o match:'b\.file.*a\.file' -s exit:0 ls -Ct atf_check -e empty -o empty -s exit:0 rm a.file atf_check -e empty -o empty -s exit:0 sh -c 'echo "i am a" > a.file' atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lt | tail -n 1' atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Ct } atf_test_case u_flag u_flag_head() { atf_set "descr" "Verify that the output from ls -u sorts by last access" } u_flag_body() { create_test_dir atf_check -e empty -o empty -s exit:0 touch a.file atf_check -e empty -o empty -s exit:0 touch b.file atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lu | tail -n 1' atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Cu atf_check -e empty -o empty -s exit:0 sh -c 'echo "i am a" > a.file' atf_check -e empty -o match:'i am a' -s exit:0 cat a.file atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lu | tail -n 1' atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Cu } atf_test_case v_flag v_flag_head() { atf_set "descr" "Verify that the output from ls -v sorts based on strverscmp(3)" } v_flag_body() { create_test_dir atf_check -e empty -o empty -s exit:0 touch 000 00 01 010 09 0 1 9 10 atf_check -e empty -o match:"000.00.01.010.09.0.1.9.10" -s exit:0 sh -c 'ls -Cv' } atf_test_case x_flag x_flag_head() { atf_set "descr" "Verify that the output from ls -x is multi-column, sorted across" } x_flag_body() { create_test_inputs WITH_x=$PWD/../with_x.out atf_check -e empty -o save:$WITH_x -s exit:0 ls -x echo "With -x usage" cat $WITH_x atf_check -e ignore -o not-empty -s exit:0 \ egrep "a[[:space:]]+c[[:space:]]+d[[:space:]]+e[[:space:]]+h" $WITH_x atf_check -e ignore -o not-empty -s exit:0 \ egrep "i[[:space:]]+klmn[[:space:]]+opqr[[:space:]]+stuv[[:space:]]+wxyz" $WITH_x } atf_test_case y_flag y_flag_head() { atf_set "descr" "Verify that the output from ls -y sorts the same way as sort(1)" } y_flag_body() { create_test_inputs WITH_sort=$PWD/../with_sort.out WITH_y=$PWD/../with_y.out atf_check -e empty -o save:$WITH_sort -s exit:0 sh -c 'ls -1 | sort' atf_check -e empty -o save:$WITH_y -s exit:0 ls -1y echo "Sorted with sort(1)" cat $WITH_sort echo "Sorted with -y" cat $WITH_y atf_check_equal "$(cat $WITH_sort)" "$(cat $WITH_y)" } atf_test_case 1_flag 1_flag_head() { atf_set "descr" "Verify that -1 prints out one item per line" } 1_flag_body() { create_test_inputs WITH_1=$PWD/../with_1.out WITHOUT_1=$PWD/../without_1.out atf_check -e empty -o save:$WITH_1 -s exit:0 ls -1 atf_check -e empty -o save:$WITHOUT_1 -s exit:0 \ sh -c 'for i in $(ls); do echo $i; done' echo "Explicit -1 usage" cat $WITH_1 echo "No -1 usage" cat $WITHOUT_1 atf_check_equal "$(cat $WITH_1)" "$(cat $WITHOUT_1)" } atf_init_test_cases() { export BLOCKSIZE=512 atf_add_test_case A_flag atf_add_test_case A_flag_implied_when_root atf_add_test_case B_flag atf_add_test_case C_flag atf_add_test_case D_flag atf_add_test_case F_flag #atf_add_test_case G_flag atf_add_test_case H_flag atf_add_test_case I_flag atf_add_test_case I_flag_voids_implied_A_flag_when_root atf_add_test_case L_flag #atf_add_test_case P_flag atf_add_test_case R_flag atf_add_test_case S_flag atf_add_test_case T_flag #atf_add_test_case U_flag #atf_add_test_case W_flag #atf_add_test_case Z_flag atf_add_test_case a_flag atf_add_test_case b_flag #atf_add_test_case c_flag atf_add_test_case d_flag atf_add_test_case f_flag atf_add_test_case g_flag atf_add_test_case h_flag atf_add_test_case i_flag atf_add_test_case k_flag atf_add_test_case l_flag atf_add_test_case lcomma_flag atf_add_test_case m_flag atf_add_test_case n_flag atf_add_test_case o_flag atf_add_test_case p_flag atf_add_test_case q_flag_and_w_flag atf_add_test_case r_flag atf_add_test_case s_flag + atf_add_test_case scomma_flag atf_add_test_case t_flag atf_add_test_case u_flag atf_add_test_case v_flag atf_add_test_case x_flag atf_add_test_case y_flag atf_add_test_case 1_flag }