diff --git a/contrib/file/ChangeLog b/contrib/file/ChangeLog index 98cdcc46b6ab..1ac5ad224cb6 100644 --- a/contrib/file/ChangeLog +++ b/contrib/file/ChangeLog @@ -1,1489 +1,1539 @@ + +2015-06-10 13:50 Christos Zoulas + + * release 5.23 + +2015-06-09 16:10 Christos Zoulas + + * Fix issue with regex range for magic with offset + * Always return true from mget with USE (success to mget not match + indication). Fixes mime evaluation after USE magic + * PR/459: Don't insert magic entries to the list if there are parsing + errors for them. + +2015-06-03 16:00 Christos Zoulas + + * PR/455: Add utf-7 encoding + +2015-06-03 14:30 Christos Zoulas + + * PR/455: Implement -Z, look inside, but don't report on compression + * PR/454: Fix allocation error on bad magic. + +2015-05-29 10:30 Christos Zoulas + + * handle MAGIC_CONTINUE everywhere, not just in softmagic + +2015-05-21 14:30 Christos Zoulas + + * don't print descriptions for NAME types when mime. + +2015-04-09 15:59 Christos Zoulas + + * Add --extension to list the known extensions for this file type + Idea by Andrew J Roazen + +2015-02-14 12:23 Christos Zoulas + + * Bump file search buffer size to 1M. + +2015-01-09 14:35 Christos Zoulas + + * Fix multiple issues with date formats reported by Christoph Biedl: + - T_LOCAL meaning was reversed + - Arithmetic did not work + Also stop adjusting daylight savings for gmt printing. + +2015-01-05 13:00 Christos Zoulas + + * PR/411: Fix memory corruption from corrupt cdf file. + 2015-01-02 15:15 Christos Zoulas * release 5.22 2015-01-01 12:01 Christos Zoulas * add indirect relative for TIFF/Exif 2014-12-16 18:10 Christos Zoulas * restructure elf note printing to avoid repeated messages * add note limit, suggested by Alexander Cherepanov 2014-12-16 16:53 Christos Zoulas * Bail out on partial pread()'s (Alexander Cherepanov) * Fix incorrect bounds check in file_printable (Alexander Cherepanov) 2014-12-11 20:01 Christos Zoulas * PR/405: ignore SIGPIPE from uncompress programs * change printable -> file_printable and use it in more places for safety * in ELF, instead of "(uses dynamic libraries)" when PT_INTERP is present print the interpreter name. 2014-12-10 20:01 Christos Zoulas * release 5.21 2014-11-27 18:40 Christos Zoulas * Allow setting more parameters from the command line. * Split name/use and indirect magic recursion limits. 2014-11-27 11:12 Christos Zoulas * Adjust ELF parameters and the default recursion level. * Allow setting the recursion level dynamically. 2014-11-24 8:55 Christos Zoulas * The following fixes resulted from Thomas Jarosch's fuzzing tests that revealed severe performance issues on pathological input: - limit number of elf program and sections processing - abort elf note processing quickly - reduce the number of recursion levels from 20 to 10 - preserve error messages in indirect magic handling This is tracked as CVE-2014-8116 and CVE-2014-8117 2014-11-12 10:30 Christos Zoulas * fix bogus free in the user buffer case. 2014-11-11 12:35 Christos Zoulas * fix out of bounds read for pascal strings * fix memory leak (not freeing the head of each mlist) 2014-11-07 10:25 Christos Zoulas * When printing strings from a file, convert them to printable on a byte by byte basis, so that we don't get issues with locale's trying to interpret random byte streams as UTF-8 and having printf error out with EILSEQ. 2014-10-17 11:48 Christos Zoulas * fix bounds in note reading (Francisco Alonso / Red Hat) 2014-10-11 15:02 Christos Zoulas * fix autoconf glue for setlocale and locale_t; some OS's have locale_t in xlocale.h 2014-10-10 15:01 Christos Zoulas * release 5.20 2014-08-17 10:01 Christos Zoulas * recognize encrypted CDF documents 2014-08-04 9:18 Christos Zoulas * add magic_load_buffers from Brooks Davis 2014-07-24 16:40 Christos Zoulas * add thumbs.db support 2014-06-12 12:28 Christos Zoulas * release 5.19 2014-06-09 9:04 Christos Zoulas * Misc buffer overruns and missing buffer size tests in cdf parsing (Francisco Alonso, Jan Kaluza) 2014-06-02 14:50 Christos Zoulas * Enforce limit of 8K on regex searches that have no limits * Allow the l modifier for regex to mean line count. Default to byte count. If line count is specified, assume a max of 80 characters per line to limit the byte count. * Don't allow conversions to be used for dates, allowing the mask field to be used as an offset. 2014-05-30 12:51 Christos Zoulas * Make the range operator limit the length of the regex search. 2014-05-14 19:23 Christos Zoulas * PR/347: Windows fixes * PR/352: Hangul word processor recognition * PR/354: Encoding irregularities in text files 2014-05-06 6:12 Christos Zoulas * Fix uninitialized title in CDF files (Jan Kaluza) 2014-05-04 14:55 Christos Zoulas * PR/351: Fix compilation of empty files 2014-04-30 17:39 Christos Zoulas * Fix integer formats: We don't specify 'l' or 'h' and 'hh' specifiers anymore, only 'll' for quads and nothing for the rest. This is so that magic writing is simpler. 2014-04-01 15:25 Christos Zoulas * PR/341: Jan Kaluza, fix memory leak * PR/342: Jan Kaluza, fix out of bounds read 2014-03-28 15:25 Christos Zoulas * Fix issue with long formats not matching fmtcheck 2014-03-26 11:25 Christos Zoulas * release 5.18 2014-03-15 17:45 Christos Zoulas * add fmtcheck(3) for those who don't have it 2014-03-14 15:12 Christos Zoulas * prevent mime entries from being attached to magic entries with no descriptions * adjust magic strength for regex type * remove superfluous ascmagic with encoding test 2014-03-06 12:01 Christos Zoulas * fix regression fix echo -ne "\012\013\014" | file -i - which printed "binary" instead of "application/octet-stream" * add size_t overflow check for magic file size 2014-02-27 16:01 Christos Zoulas * experimental support for matching with CFD CLSID 2014-02-18 13:04 Kimmo Suominen (kimmo@suominen.com) * Cache old LC_CTYPE locale before setting it to "C", so we can use it to restore LC_CTYPE instead of asking setlocale() to scan the environment variables. 2014-02-12 18:21 Christos Zoulas * Count recursion levels through indirect magic 2014-02-11 10:40 Christos Zoulas * Prevent infinite recursion on files with indirect offsets of 0 2014-01-30 21:00 Christos Zoulas * Add -E flag that makes file print filesystem errors to stderr and exit. 2014-01-08 17:20 Christos Zoulas * mime printing could print results from multiple magic entries if there were multiple matches. * in some cases overflow was not detected when computing offsets in softmagic. 2013-12-05 12:00 Christos Zoulas * use strcasestr() to for cdf strings * reset to the "C" locale while doing regex operations, or case insensitive comparisons; this is provisional 2013-11-19 20:10 Christos Zoulas * always leave magic file loaded, don't unload for magic_check, etc. * fix default encoding to binary instead of unknown which broke recently * handle empty and one byte files, less specially so that --mime-encoding does not break completely. ` 2013-11-06 14:40 Christos Zoulas * fix erroneous non-zero exit code from non-existant file and message 2013-10-29 14:25 Christos Zoulas * add CDF MSI file detection (Guy Helmer) 2013-09-03 11:56 Christos Zoulas * Don't mix errors and regular output if there was an error * in magic_descriptor() don't close the file and try to restore its position 2013-05-30 17:25 Christos Zoulas * Don't treat magic as an error if offset was past EOF (Christoph Biedl) 2013-05-28 17:25 Christos Zoulas * Fix spacing issues in softmagic and elf (Jan Kaluza) 2013-05-02 18:00 Christos Zoulas * Fix segmentation fault with multiple magic_load commands. 2013-04-22 11:20 Christos Zoulas * The way "default" was implemented was not very useful because the "if something was printed at that level" was not easily controlled by the user, and the format was bound to a string which is too restrictive. Add a "clear" for that level keyword and make "default" void. This way one can do: >>13 clear x >>13 lelong 1 foo >>13 lelong 2 bar >>13 default x >>>13 lelong x unknown %x 2013-03-25 13:20 Christos Zoulas * disallow strength setting in "name" entries 2013-03-06 21:24 Christos Zoulas * fix recursive magic separator printing 2013-02-26 19:28 Christos Zoulas * limit recursion level for mget * fix pread() related breakage in cdf * handle offsets properly in recursive "use" 2013-02-18 10:39 Christos Zoulas * add elf reading of debug info to determine if file is stripped (Jan Kaluza) * use pread() 2013-01-25 18:05 Christos Zoulas * change mime description size from 64 to 80 to accommodate OOXML. 2013-01-11 14:50 Christos Zoulas * Warn about inconsistent continuation levels. * Change fsmagic to add a space after it prints. 2013-01-10 21:00 Christos Zoulas * Make getline public so that file can link against it. Perhaps it is better to rename it, or hide it differently. Fixes builds on platforms that do not provide it. 2013-01-07 16:30 Christos Zoulas * Add SuS d{,1,2,4,8}, u{,1,2,4,8} and document what long, int, short, etc is (Guy Harris) 2013-01-06 11:20 Christos Zoulas * add magic_version function and constant * Redo memory allocation and de-allocation. (prevents double frees on non mmap platforms) * Fix bug with name/use having to do with passing found state from the parent to the child and back. 2012-12-19 8:47 Christos Zoulas * Only print elf capabilities for archs we know (Jan Kaluza) 2012-10-30 19:14 Christos Zoulas * Add "name" and "use" file types in order to look inside mach-o files. 2012-09-06 10:40 Christos Zoulas * make --version exit 0 (Matthew Schultz) * add string/T (Jan Kaluza) 2012-08-09 2:15 Christos Zoulas * add z and t modifiers for our own vasprintf * search for $HOME/.magic.mgc if it is there first * fix reads from a pipe, and preserve errno 2012-05-15 13:12 Christos Zoulas * use ctime_r, asctime_r 2012-04-06 17:18 Christos Zoulas * Fixes for indirect offsets to handle apple disk formats 2012-04-03 18:26 Christos Zoulas * Add windows date field types * More info for windows shortcuts (incomplete) 2012-02-20 17:33 Christos Zoulas * Fix CDF parsing issues found by CERT's fuzzing tool (Will Dormann) 2011-12-15 12:17 Chris Metcalf * Support Tilera architectures (tile64, tilepro, tilegx). 2011-12-16 16:33 Reuben Thomas * Add magic for /usr/bin/env Perl scripts * Weaken generic script magic to avoid clashing with language-specific magic. 2011-12-08 13:37 Reuben Thomas * Simplify if (p) free(p) to free(p). 2011-12-08 13:07 Reuben Thomas * Remove hardwired token finding (names.h), turning it into soft magic. Patterns are either anchored regexs or search/8192. English language detection and PL/1 detection have been removed as they were too fragile. -e tokens is still accepted for backwards compatibility. * Move 3ds patterns (which are commented out anyway) into autodesk (they were, oddly, in c-lang). 2011-12-06 00:16 Reuben Thomas * Tweak strength of generic hash-bang detectors to be less than specific ones. * Make an inconsistent description of Python scripts consistent. 2011-12-05 23:58 Reuben Thomas * Fix minor error in file(1). 2011-11-05 00:00 Reuben Thomas * Fix issue #150 (I hope). 2011-09-22 12:57 Christos Zoulas * Python3 binding fixes from Kelly Anderson 2011-09-20 11:32 Christos Zoulas * If a string type magic entry is marked as text or binary only match text files against text entries and binary files against binary entries. 2011-09-01 12:12 Christos Zoulas * Don't wait for any subprocess, just the one we forked. 2011-08-26 16:40 Christos Zoulas * If the application name is not set in a cdf file, try to see if it has a directory with the application name on it. 2011-08-17 14:32 Christos Zoulas * Fix ELF lseek(2) madness. Inspired by PR/134 by Jan Kaluza 2011-08-14 09:03 Christos Zoulas * Don't use variable string formats. 2011-07-12 12:32 Reuben Thomas * Fix detection of Zip files (Mantis #128). * Make some minor improvements to file(1). * Rename MIME types for filesystem objects for consistency with xdg-utils. Typically this means that application/x-foo becomes inode/foo, but some names also change slightly, e.g. application/x-character-device becomes inode/chardevice. 2011-05-10 20:57 Christos Zoulas * fix mingw compilation (Abradoks) 2011-05-10 20:57 Christos Zoulas * remove patchlevel.h * Fix read past allocated memory caused by double-incrementing a pointer in a loop (reported by Roberto Maar) 2011-03-30 15:45 Christos Zoulas * Fix cdf string buffer setting (Sven Anders) 2011-03-20 16:35 Christos Zoulas * Eliminate MAXPATHLEN and use dynamic allocation for path and file buffers. 2011-03-15 18:15 Christos Zoulas * binary tests on magic entries with masks could spuriously get converted to ascii. 2011-03-12 18:06 Reuben Thomas * Improve file.man (remove BUGS, present email addresses consistently). 2011-03-07 19:38 Christos Zoulas * add lrzip support (from Ville Skytta) 2011-02-10 16:36 Christos Zoulas * fix CDF bounds checking (Guy Helmer) 2011-02-10 12:03 Christos Zoulas * add cdf_ctime() that prints a meaningful error when time cannot be converted. 2011-02-02 20:40 Christos Zoulas * help and version output to stdout. * When matching softmagic for ascii files, don't just print the softmagic classification, keep going and print the text classification too. This fixes broken troff files when we moved them from keyword recognition to softmagic (they stopped printing "with CRLF" etc.) Reported by Doug McIlroy. 2011-01-16 19:31 Reuben Thomas * Fix two potential buffer overruns in apprentice_list. 2011-01-14 22:33 Reuben Thomas * New Python binding in pure Python. * Update libmagic(3). 2011-01-06 21:40 Reuben Thomas * Fix Python bindings (including recent Python 3 compatibility update). 2011-01-04 18:43 Reuben Thomas * magic/Makefile.am: make it easier to recover from magic build failures. * Fix pstring length specifier parsing to avoid generating invalid magic files. * Add pstring length "J" (for "JPEG") to specify that the length include itself. * Fix JPEG comment parsing at last using pstring/HJ! * Ignore section 5 man pages in doc/.cvsignore. 2010-12-22 13:12 Christos Zoulas * Add pstring/BHhLl to specify the type of the length of pascal strings. 2010-11-26 18:39 Reuben Thomas * Fix "-e soft": it was ignored when softmagic was called during asciimagic. * Improve comments and use "unsigned char" in tar.h/is_tar.c. 2010-11-05 17:26 Reuben Thomas * Make bug reporting addresses more visible. 2010-11-01 18:35 Reuben Thomas * Add tcl magic from Gustaf Neumann 2010-10-24 10:42 Christos Zoulas * Fix the whitespace comparing code (Christopher Chittleborough) 2010-10-06 21:05 Christos Zoulas * allow string/t to work (Jan Kaluza) 2010-09-20 22:11 Reuben Thomas * Apply some patches from Ubuntu and Fedora. 2010-09-20 21:16 Reuben Thomas * Apply all patches from Debian package 5.04-6 which have not already been applied and are not Debian-specific. 2010-09-20 15:24 Reuben Thomas * Minor security fix to softmagic.c (don't use untrusted string as printf format). 2010-07-21 12:20 Christos Zoulas * MINGW32 portability from LRN * Don't warn about escaping magic regex chars when we are in a regex. 2010-07-19 10:55 Christos Zoulas * Only try to print prpsinfo for core files. (Jan Kaluza) 2010-04-22 12:55 Christos Zoulas * Try more elf offsets for Debian core files. (Arnaud Giersch) 2010-02-20 15:18 Reuben Thomas * Clarify which sort of CDF we mean. 2010-02-14 22:58 Reuben Thomas * Re-jig Zip file type magic so that unsupported special Zip types (those with "mimetype" at offset 30) can be recognized. 2010-02-02 21:50 Reuben Thomas * Add support for OCF (EPUB) files (application/epub+zip) 2010-01-28 18:25 Christos Zoulas * Fix core-dump from unbound loop: https://bugzilla.redhat.com/show_bug.cgi?id=533245 2010-01-22 15:45 Christos Zoulas * print proper mime for crystal reports file * print the last summary information of a cdf document, not the first so that nested documents print the right info 2010-01-16 18:42 Charles Longeau * bring back some fixes from OpenBSD: - make gcc2 builds file - fix typos in a magic file comment 2009-11-17 18:35 Christos Zoulas * ctime/asctime can return NULL on some OS's although they should not (Toshit Antani) 2009-09-14 13:49 Christos Zoulas * Centralize magic path handling routines and remove the special-casing from file.c so that the python module for example comes up with the same magic path (Fixes ~/.magic handling) (from Gab) 2009-09-11 23:38 Reuben Thomas * When magic argument is a directory, read the files in strcmp-sorted order (fixes Debian bug #488562 and our own FIXME). 2009-09-11 13:11 Reuben Thomas * Combine overlapping epoc and psion magic files into one (epoc). * Add some more EPOC MIME types. 2009-08-19 15:55 Christos Zoulas * Fix 3 bugs (From Ian Darwin): - file_showstr could move one past the end of the array - parse_apple did not nul terminate the string in the overflow case - parse_mime truncated the wrong string in the overflow case 2009-08-12 12:28 Robert Byrnes * Include Localstuff when compiling magic. 2009-07-15 10:05 Christos Zoulas * Fix logic for including mygetopts.h * Make cdf.c compile again with debugging * Add the necessary field handling for crystal reports files to work 2009-06-23 01:34 Reuben Thomas * Stop "(if" identifying Lisp files, that's plain dumb! 2009-06-09 22:13 Reuben Thomas * Add a couple of missing MP3 MIME types. 2009-05-27 23:00 Reuben Thomas * Add full range of hash-bang tests for Python and Ruby. * Add MIME types for Python and Ruby scripts. 2009-05-13 10:44 Christos Zoulas * off by one in parsing hw capabilities in elf (Cheng Renquan) 2009-05-08 13:40 Christos Zoulas * lint fixes and more from NetBSD 2009-05-06 10:25 Christos Zoulas * Avoid null dereference in cdf code (Drew Yao) * More cdf bounds checks and overflow checks 2009-05-01 18:37 Christos Zoulas * Buffer overflow fixes from Drew Yao 2009-04-30 17:10 Christos Zoulas * Fix more cdf lossage. All the documents I have right now print the correct information. 2009-03-27 18:43 Christos Zoulas * don't print \012- separators in the same magic entry if it consists of multiple magic printing lines. 2009-03-23 10:20 Christos Zoulas * Avoid file descriptor leak in compress code from (Daniel Novotny) 2009-03-18 16:50 Christos Zoulas * Allow escaping of relation characters, so that we can say \^[A-Z] and the ^ is not eaten as a relation char. * Fix troff and fortran to their previous glory using regex. This was broken since their removel from ascmagic. 2009-03-10 16:50 Christos Zoulas * don't use strlen in strndup() (Toby Peterson) 2009-03-10 7:45 Christos Zoulas * avoid c99 syntax. 2009-02-23 15:45 Christos Zoulas * make the cdf code use the buffer first if available, and then the fd code. 2009-02-13 13:45 Christos Zoulas * look for struct option to determine if getopt.h is usable for IRIX. * sanitize cdf document strings 2009-02-04 13:25 Christos Zoulas * fix OS/2 warnings. 2008-12-12 15:50 Christos Zoulas * fix initial offset calculation for non 4K sector files * add loop limits to avoid DoS attacks by constructing looping sector references. 2008-12-03 13:05 Christos Zoulas * fix memory botches on cdf file parsing. * exit with non-zero value for any error, not just for the last file processed. 2008-11-09 20:42 Charles Longeau * Replace all str{cpy,cat} functions with strl{cpy,cat} * Ensure that strl{cpy,cat} are included in libmagic, as needed. 2008-11-06 18:18 Christos Zoulas * Handle ID3 format files. 2008-11-06 23:00 Reuben Thomas * Fix --mime, --mime-type and --mime-encoding under new scheme. * Rename "ascii" to "text" and add "encoding" test. * Return a precise ("utf-16le" or "utf-16be") MIME charset for UTF-16. * Fix error in comment caused by automatic indentation adding words! 2008-11-06 10:35 Christos Zoulas * use memchr instead of strchr because the string might not be NUL terminated (Scott MacVicar) 2008-11-03 07:31 Reuben Thomas * Fix a printf with a non-literal format string. * Fix formatting and punctuation of help for "--apple". 2008-10-30 11:00 Reuben Thomas * Correct words counts in comments of struct magic. * Fix handle_annotation to allow both Apple and MIME types to be printed, and to return correct code if MIME type is printed (1, not 0) or if there's an error (-1 not 1). * Fix output of charset for MIME type (precede with semi-colon; fixes Debian bug #501460). * Fix potential attacks via conversion specifications in magic strings. * Add a FIXME for Debian bug #488562 (magic files should be read in a defined order, by sorting the names). 2008-10-18 16:45 Christos Zoulas * Added APPLE file creator/type 2008-10-12 10:20 Christos Zoulas * Added CDF parsing 2008-10-09 16:40 Christos Zoulas * filesystem and msdos patches (Joerg Jenderek) 2008-10-09 13:20 Christos Zoulas * correct --exclude documentation issues: remove troff and fortran and rename "token" to "tokens". (Randy McMurchy) 2008-10-01 10:30 Christos Zoulas * Read ~/.magic in addition to the default magic file not instead of, as documented in the man page. 2008-09-10 21:30 Reuben Thomas * Comment out graphviz patterns, as they match too many files. 2008-08-30 12:54 Christos Zoulas * Don't eat trailing \n in magic enties. * Cast defines to allow compilation using a c++ compiler. 2008-08-25 23:56 Reuben Thomas * Add text/x-lua MIME type for Lua scripts. * Escape { in regex in graphviz patterns. 2008-07-26 00:59 Reuben Thomas * Add MIME types for special files. * Use access to give more accurate information for files that can't be opened. * Add a TODO list. 2008-07-02 11:15 Christos Zoulas * add !:strength op to adjust magic strength (experimental) 2008-06-16 21:41 Reuben Thomas * Fix automake error in configure.ac. * Add MIME type for Psion Sketch files. 2008-06-05 08:59 Christos Zoulas * Don't print warnings about bad namesize in stripped binaries with PT_NOTE is still there, and the actual note is gone (Jakub Jelinek) 2008-05-28 15:12 Robert Byrnes * magic/Magdir/elf: Note invalid byte order for little-endian SPARC32PLUS. Add SPARC V9 vendor extensions and memory model. * src/elfclass.h: Pass target machine to doshn (for Solaris hardware capabilities). * src/readelf.c (doshn): Add support for Solaris hardware/software capabilities. * src/readelf.h: Ditto. * src/vasprintf.c (dispatch): Add support for ll modifier. 2008-05-16 10:25 Christos Zoulas * Fix compiler warnings. * remove stray printf, and fix a vprintf bug. (Martin Dorey) 2008-05-06 00:13 Robert Byrnes * src/Makefile.am: Ensure that getopt_long and [v]asprintf are included in libmagic, as needed. Remove unnecessary EXTRA_DIST. * src/Makefile.in: Rerun automake. * src/vasprintf.c (dispatch): Fix variable precision bug: be sure to step past '*'. * src/vasprintf.c (core): Remove unreachable code. * src/apprentice.c (set_test_type): Add cast to avoid compiler warning. 2008-04-22 23:45 Christos Zoulas * Add magic submission guidelines (Abel Cheung) * split msdos and windows magic (Abel Cheung) 2008-04-04 11:00 Christos Zoulas * >= <= is not supported, so fix the magic and warn about it. reported by: Thien-Thi Nguyen 2008-03-27 16:16 Robert Byrnes * src/readelf.c (donote): ELF core file command name/line bug fixes and enhancements: Try larger offsets first to avoid false matches from earlier data that happen to look like strings; this primarily affected SunOS 5.x 32-bit Intel core files. Add support for command line (instead of just short name) for SunOS 5.x. Add information about NT_PSINFO for SunOS 5.x. Only trim whitespace from end of command line. 2007-02-11 01:36 Reuben Thomas * Change strength of ! from MULT to 0, as it matches almost anything (Reuben Thomas) * Debian fixes (Reuben Thomas) 2007-02-11 00:17 Reuben Thomas * Clarify UTF-8 BOM message (Reuben Thomas) * Add HTML comment to token list in names.h 2007-02-04 15:50 Christos Zoulas * Debian fixes (Reuben Thomas) 2007-02-04 11:31 Christos Zoulas * !:mime annotations in magic files (Reuben Thomas) 2007-01-29 15:35 Christos Zoulas * zero out utime/utimes structs (Gavin Atkinson) 2007-01-26 13:45 Christos Zoulas * reduce writable data from Diego "Flameeyes" Petten 2007-12-28 15:06 Christos Zoulas * strtof detection * remove bogus regex magic that could cause a DoS * better mismatch version message 2007-12-27 11:35 Christos Zoulas * bring back some fixes from OpenBSD * treat ELF dynamic objects as executables * fix gcc warnings 2007-12-01 19:55 Christos Zoulas * make sure we have zlib.h and libz to compile the builtin decompress code 2007-10-28 20:48 Christos Zoulas * float and double magic support (Behan Webster) 2007-10-28 20:48 Christos Zoulas * Convert fortran to a soft test (Reuben Thomas) 2007-10-23 5:25 Christos Zoulas * Add --with-filename, and --no-filename (Reuben Thomas) 2007-10-23 3:59 Christos Zoulas * Rest of the mime split (Reuben Thomas) * Make usage message generated from the flags so that they stay consistent (Reuben Thomas) 2007-10-20 3:06 Christos Zoulas * typo in comment, missing ifdef QUICK, remove unneeded code (Charles Longeau) 2007-10-17 3:33 Christos Zoulas * Fix problem printing -\012 in some entries * Separate magic type and encoding flags (Reuben Thomas) 2007-10-09 3:55 Christos Zoulas * configure fix for int64 and strndup (Reuben Thomas) 2007-09-26 4:45 Christos Zoulas * Add magic_descriptor() function. * Fix regression in elf reading code where the core name was not being printed. * Don't convert NUL's to spaces in {l,b}estring16 (Daniel Dawson) 2007-08-19 6:30 Christos Zoulas * Make mime format consistent so that it can be easily parsed: mimetype [charset=character-set] [encoding=encoding-mime-type] Remove spurious extra text from some MIME type printouts (mostly in is_tar). Fix one case where -i produced nothing at all (for a 1-byte file, which is now classed as application/octet-stream). Remove 7/8bit classifications, since they were arbitrary and not based on the file data. This work was done by Reuben Thomas 2007-05-24 10:00 Christos Zoulas * Fix another integer overflow (Colin Percival) 2007-03-26 13:58 Christos Zoulas * make sure that all of struct magic_set is initialized appropriately (Brett) 2007-03-25 17:44 Christos Zoulas * reset left bytes in the buffer (Dmitry V. Levin) * compilation failed with COMPILE_ONLY and ENABLE_CONDITIONALS (Peter Avalos) 2007-03-15 10:51 Christos Zoulas * fix fortran and nroff reversed tests (Dmitry V. Levin) * fix exclude option (Dmitry V. Levin) 2007-02-08 17:30 Christos Zoulas * fix integer underflow in file_printf which can lead to to exploitable heap overflow (Jean-Sebastien Guay-Lero) 2007-02-05 11:35 Christos Zoulas * make socket/pipe reading more robust 2007-01-25 16:01 Christos Zoulas * Centralize all the tests in file_buffer. * Add exclude flag. 2007-01-18 05:29 Anon Ymous * Move the "type" detection code from parse() into its own table driven routine. This avoids maintaining multiple lists in file.h. * Add an optional conditional field (ust before the type field). This code is wrapped in "#ifdef ENABLE_CONDITIONALS" as it is likely to go away. 2007-01-16 23:24 Anon Ymous * Fix an initialization bug in check_mem(). 2007-01-16 14:58 Anon Ymous * Add a "default" type to print a message if nothing previously matched at that level or since the last default at that level. This is useful for setting up switch-like statements. It can also be used to do if/else constructions without a redundant second test. * Fix the "x" special case test so that one can test for that string with "=x". * Allow "search" to search the entire buffer if the "/N" search count is missing. * Make "regex" work! It now starts its search at the specified offset and takes an (optional) "/N" line count to specify the search range; otherwise it searches to the end of the file. The match is now grabbed correctly for format strings and the offset set to the end of the match. * Add a "/s" flag to "regex" and "search" to set the offset to the start of the match. By default the offset is set to the end of the match, as it is with other tests. This is mostly useful for "regex". * Make "search", "string" and "pstring" use the same file_strncmp() routine so that they support the same flags; "bestring16" and "lestring16" call the same routine, but with flags = 0. Also add a "/C" flag (in analogy to "/c") to ignore the case on uppercase (lowercase) characters in the test string. * Strict adherence to C style string escapes. A warnings are printed when compiling. Note: previously "\a" was incorrectly translated to 'a' instead of an (i.e., BELL, typically 0x07). * Make this compile with "-Wall -Wextra" and all the warning flags used with WARNS=4 in the NetBSD source. Also make it pass lint. * Many "cleanups" and hopefully not too many new bugs! 2007-01-16 14:56 Anon Ymous * make several more files compile with gcc warnings on and also make them pass lint. 2007-01-16 14:54 Anon Ymous * fix a puts()/putc() usage goof in file.c * make file.c compile with gcc warnings and pass lint 2006-12-11 16:49 Christos Zoulas * fix byteswapping issue * report the number of bytes we tried to allocate when allocation fails * add a few missed cases in the strength routine 2006-12-08 16:32 Christos Zoulas * store and print the line number of the magic entry for debugging. * if the magic entry did not print anything, don't treat it as a match * change the magic strength algorithm to take into account the relationship op. * fix a bug in search where we could accidentally return a match. * propagate the error return from match to file_softmagic. 2006-11-25 13:35 Christos Zoulas * Don't store the current offset in the magic struct, because it needs to be restored and it was not done properly all the time. Bug found by: Arkadiusz Miskiewicz * Fix problem in the '\0' separator; and don't print it as an additional separator; print it as the only separator. 2006-11-17 10:51 Christos Zoulas * Added a -0 option to print a '\0' separator Etienne Buira 2006-10-31 15:14 Christos Zoulas * Check offset before copying (Mike Frysinger) * merge duplicated code * add quad date support * make sure that we nul terminate desc (Ryoji Kanai) * don't process elf notes multiple times * allow -z to report empty compressed files * use calloc to initialize the ascii buffers (Jos van den Oever) 2006-06-08 11:11 Christos Zoulas * QNX fixes (Mike Gorchak) * Add quad support. * FIFO checks (Dr. Werner Fink) * Linux ELF fixes (Dr. Werner Fink) * Magic format checks (Dr. Werner Fink) * Magic format function improvent (Karl Chen) 2006-05-03 11:11 Christos Zoulas * Pick up some elf changes and some constant fixes from SUSE * Identify gnu tar vs. posix tar * When keep going, don't print spurious newlines (Radek Vokal) 2006-04-01 12:02 Christos Zoulas * Use calloc instead of malloc (Mike Frysinger) * Fix configure script to detect wctypes.h (Mike Frysinger) 2006-03-02 16:06 Christos Zoulas * Print empty if the file is (Mike Frysinger) * Don't try to read past the end of the buffer (Mike Frysinger) * Sort magic entries by strength [experimental] 2005-11-29 13:26 Christos Zoulas * Use iswprint() to convert the output string. (Bastien Nocera) 2005-10-31 8:54 Christos Zoulas * Fix regression where the core info was not completely processed (Radek Vokal) 2005-10-20 11:15 Christos Zoulas * Middle Endian magic (Diomidis Spinellis) 2005-10-17 11:15 Christos Zoulas * Open with O_BINARY for CYGWIN (Corinna Vinschen) * Don't close stdin (Arkadiusz Miskiewicz) * Look for note sections in non executables. 2005-09-20 13:33 Christos Zoulas * Don't print SVR4 Style in core files multiple times (Radek Vokal) 2005-08-27 04:09 Christos Zoulas * Cygwin changes Corinna Vinschen 2005-08-18 09:53 Christos Zoulas * Remove erroreous mention of /etc/magic in the file man page This is gentoo bug 101639. (Mike Frysinger) * Cross-compile support and detection (Mike Frysinger) 2005-08-12 10:17 Christos Zoulas * Add -h flag and dereference symlinks if POSIXLY_CORRECT is set. 2005-07-29 13:57 Christos Zoulas * Avoid search and regex buffer overflows (Kelledin) 2005-07-12 11:48 Christos Zoulas * Provide stub implementations for {v,}nsprintf() for older OS's that don't have them. * Change mbstate_t autoconf detection macro from AC_MBSTATE_T to AC_TYPE_MBSTATE_T. 2005-06-25 11:48 Christos Zoulas * Dynamically allocate the string buffers and make the default read size 256K. 2005-06-01 00:00 Joerg Sonnenberger * Dragonfly ELF note support 2005-03-14 00:00 Giuliano Bertoletti * Avoid NULL pointer dereference in time conversion. 2005-03-06 00:00 Joerg Walter * Add indirect magic offset support, and search mode. 2005-01-12 00:00 Stepan Kasal * src/ascmagic.c (file_ascmagic): Fix three bugs about text files: If a CRLF text file happens to have CR at offset HOWMANY - 1 (currently 0xffff), it should not be counted as CR line terminator. If a line has length exactly MAXLINELEN, it should not yet be treated as a ``very long line'', as MAXLINELEN is ``longest sane line length''. With CRLF, the line length was not computed correctly, and even lines of length MAXLINELEN - 1 were treated as ``very long''. 2004-12-07 14:15 Christos Zoulas * bzip2 needs a lot of input buffer space on some files before it can begin uncompressing. This makes file -z fail on some bz2 files. Fix it by giving it a copy of the file descriptor to read as much as it wants if we have access to it. 2004-11-24 12:39 Christos Zoulas * Stack smash fix, and ELF more conservative reading. Jakub Bogusz 2004-11-20 18:50 Christos Zoulas * New FreeBSD version parsing code: Jon Noack * Hackish support for ucs16 strings 2004-11-13 03:07 Christos Zoulas * print the file name and line number in syntax errors. 2004 10-12 10:50 Christos Zoulas * Fix stack overwriting on 0 length strings: Tim Waugh Ned Ludd 2004-09-27 11:30 Christos Zoulas * Remove 3rd and 4th copyright clause; approved by Ian Darwin. * Fix small memory leaks; caught by: Tamas Sarlos 2004-07-24 16:33 Christos Zoulas * magic.mime update Danny Milosavljevic * FreeBSD version update Oliver Eikemeier * utime/utimes detection Ian Lance Taylor * errors reading elf magic Jakub Bogusz 2004-04-12 10:55 Christos Zoulas * make sure that magic formats match magic types during compilation * fix broken sgi magic file 2004-04-06 20:36 Christos Zoulas * detect present of mbstate_t Petter Reinholdtsen * magic fixes 2004-03-22 15:25 Christos Zoulas * Lots of mime fixes (Joerg Ostertag) * FreeBSD ELF version handling (Edwin Groothuis) * correct cleanup in all cases; don't just close the file. (Christos Zoulas) * add gettext message catalogue support (Michael Piefel) * better printout for unreadable files (Michael Piefel) * compensate for missing MAXPATHLEN (Michael Piefel) * add wide character string length computation (Michael Piefel) * Avoid infinite loops caused by bad elf alignments or name and description note sizes. Reported by (Mikael Magnusson) 2004-03-09 13:55 Christos Zoulas * Fix possible memory leak on error and add missing regfree (Dmitry V. Levin) 2003-12-23 12:12 Christos Zoulas * fix -k flag (Maciej W. Rozycki) 2003-11-18 14:10 Christos Zoulas * Try to give us much info as possible on corrupt elf files. (Willy Tarreau) * Updated python bindings (Brett Funderburg) 2003-11-11 15:03 Christos Zoulas * Include file.h first, because it includes config.h breaks largefile test macros otherwise. (Paul Eggert via Lars Hecking ) 2003-10-14 21:39 Christos Zoulas * Python bindings (Brett Funderburg) * Don't lookup past the end of the buffer (Chad Hanson) * Add MAGIC_ERROR and api on magic_errno() 2003-10-08 12:40 Christos Zoulas * handle error conditions from compile as fatal (Antti Kantee) * handle magic filename parsing sanely * more magic fixes. * fix a memory leak (Illes Marton) * describe magic file handling (Bryan Henderson) 2003-09-12 15:09 Christos Zoulas * update magic files. * remove largefile support from file.h; it breaks things on most OS's 2003-08-10 10:25 Christos Zoulas * fix unmapping'ing of mmaped files. 2003-07-10 12:03 Christos Zoulas * don't exit with -1 on error; always exit 1 (Marty Leisner) * restore utimes code. 2003-06-10 17:03 Christos Zoulas * make sure we don't access uninitialized memory. * pass lint * #ifdef __cplusplus in magic.h 2003-05-25 19:23 Christos Zoulas * rename cvs magic file to revision to deal with case insensitive filesystems. 2003-05-23 17:03 Christos Zoulas * documentation fixes from Michael Piefel * magic fixes (various) * revert basename magic in .mgc name determination * buffer protection in uncompress, signness issues, close files Maciej W. Rozycki * fix zsh magic 2003-04-04 16:59 Christos Zoulas * fix operand sort order in string. 2003-04-02 17:30 Christos Zoulas * cleanup namespace in magic.h 2003-04-02 13:50 Christos Zoulas * Magic additions (Alex Ott) * Fix bug that broke VPATH compilation (Peter Breitenlohner) 2003-03-28 16:03 Christos Zoulas * remove packed attribute from magic struct. * make the magic struct properly aligned. * bump version number of compiled files to 2. 2003-03-27 13:10 Christos Zoulas * separate tar detection and run it before softmagic. * fix reversed symlink test. * fix version printing. * make separator a string instead of a char. * update manual page and sort options. 2003-03-26 11:00 Christos Zoulas * Pass lint * make NULL in magic_file mean stdin * Fix "-" argument to file to pass NULL to magic_file * avoid pointer casts by using memcpy * rename magic_buf -> magic_buffer * keep only the first error * manual page: new sentence, new line * fix typo in api function (magic_buf -> magic_buffer) diff --git a/contrib/file/Makefile.in b/contrib/file/Makefile.in index eed031897ffd..cb2dfc3a34d9 100644 --- a/contrib/file/Makefile.in +++ b/contrib/file/Makefile.in @@ -1,803 +1,815 @@ -# Makefile.in generated by automake 1.14 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \ - README TODO compile config.guess config.sub depcomp install-sh \ - missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \ + COPYING ChangeLog INSTALL NEWS README TODO compile \ + config.guess config.sub depcomp install-sh ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print pkgdatadir = @pkgdatadir@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ HAVE_VISIBILITY = @HAVE_VISIBILITY@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MINGW = @MINGW@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WARNINGS = @WARNINGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ fsect = @fsect@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = MAINT SUBDIRS = src magic tests doc python all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ dist-xz dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/contrib/file/TODO b/contrib/file/TODO index eef01edb241b..5c2ed49e02f1 100644 --- a/contrib/file/TODO +++ b/contrib/file/TODO @@ -1,19 +1,22 @@ Most TODOs live in the TODO section of doc/file.man (i.e. file(1)). They are more visible there, so please add any further TODOs to that file, not here. More speculative material can live here. (This change was made when Reuben Thomas noticed that all the bugs listed in the BUGS section of the man page had been fixed!) --- It would be nice to simplify file considerably. For example, reimplement the apprentice and non-pattern magic methods in Python, and compile the magic patterns to a giant regex (or something similar; maybe using Ragel (http://www.complang.org/ragel/)) so that only a small amount of C is needed (because fast execution is typically only required for soft magic, not the more detailed information given by hard-wired routines). In this regard, note that hplip, which is BSD-licensed, has a magic reimplementation in Python. Read the kerberos magic entry for more ideas. + +Write a string merger to make magic entry sizes dynamic. +Strings will be converted to offsets from the string table. diff --git a/contrib/file/aclocal.m4 b/contrib/file/aclocal.m4 index a9ddc4b1f9d8..4398374d8259 100644 --- a/contrib/file/aclocal.m4 +++ b/contrib/file/aclocal.m4 @@ -1,1233 +1,1236 @@ -# generated automatically by aclocal 1.14 -*- Autoconf -*- +# generated automatically by aclocal 1.15 -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # visibility.m4 serial 5 (gettext-0.18.2) -dnl Copyright (C) 2005, 2008, 2010-2013 Free Software Foundation, Inc. +dnl Copyright (C) 2005, 2008, 2010-2014 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. dnl Tests whether the compiler supports the command-line option dnl -fvisibility=hidden and the function and variable attributes dnl __attribute__((__visibility__("hidden"))) and dnl __attribute__((__visibility__("default"))). dnl Does *not* test for __visibility__("protected") - which has tricky dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on dnl Mac OS X. dnl Does *not* test for __visibility__("internal") - which has processor dnl dependent semantics. dnl Does *not* test for #pragma GCC visibility push(hidden) - which is dnl "really only recommended for legacy code". dnl Set the variable CFLAG_VISIBILITY. dnl Defines and sets the variable HAVE_VISIBILITY. AC_DEFUN([gl_VISIBILITY], [ AC_REQUIRE([AC_PROG_CC]) CFLAG_VISIBILITY= HAVE_VISIBILITY=0 if test -n "$GCC"; then dnl First, check whether -Werror can be added to the command line, or dnl whether it leads to an error because of some other option that the dnl user has put into $CC $CFLAGS $CPPFLAGS. AC_MSG_CHECKING([whether the -Werror option is usable]) AC_CACHE_VAL([gl_cv_cc_vis_werror], [ gl_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -Werror" AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[]], [[]])], [gl_cv_cc_vis_werror=yes], [gl_cv_cc_vis_werror=no]) CFLAGS="$gl_save_CFLAGS"]) AC_MSG_RESULT([$gl_cv_cc_vis_werror]) dnl Now check whether visibility declarations are supported. AC_MSG_CHECKING([for simple visibility declarations]) AC_CACHE_VAL([gl_cv_cc_visibility], [ gl_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fvisibility=hidden" dnl We use the option -Werror and a function dummyfunc, because on some dnl platforms (Cygwin 1.7) the use of -fvisibility triggers a warning dnl "visibility attribute not supported in this configuration; ignored" dnl at the first function definition in every compilation unit, and we dnl don't want to use the option in this case. if test $gl_cv_cc_vis_werror = yes; then CFLAGS="$CFLAGS -Werror" fi AC_COMPILE_IFELSE( [AC_LANG_PROGRAM( [[extern __attribute__((__visibility__("hidden"))) int hiddenvar; extern __attribute__((__visibility__("default"))) int exportedvar; extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void); extern __attribute__((__visibility__("default"))) int exportedfunc (void); void dummyfunc (void) {} ]], [[]])], [gl_cv_cc_visibility=yes], [gl_cv_cc_visibility=no]) CFLAGS="$gl_save_CFLAGS"]) AC_MSG_RESULT([$gl_cv_cc_visibility]) if test $gl_cv_cc_visibility = yes; then CFLAG_VISIBILITY="-fvisibility=hidden" HAVE_VISIBILITY=1 fi fi AC_SUBST([CFLAG_VISIBILITY]) AC_SUBST([HAVE_VISIBILITY]) AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY], [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.]) ]) -# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# Copyright (C) 2002-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' +[am__api_version='1.15' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14], [], +m4_if([$1], [1.15], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14])dnl +[AM_AUTOMAKE_VERSION([1.15])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi -fi]) +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# Copyright (C) 2003-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) -# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# Copyright (C) 2009-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# Copyright (C) 2006-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# Copyright (C) 2004-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) m4_include([acinclude.m4]) diff --git a/contrib/file/compile b/contrib/file/compile index 531136b068ef..a85b723c7e67 100755 --- a/contrib/file/compile +++ b/contrib/file/compile @@ -1,347 +1,347 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: diff --git a/contrib/file/config.h.in b/contrib/file/config.h.in index 066bd2f3118d..0397fe43ba62 100644 --- a/contrib/file/config.h.in +++ b/contrib/file/config.h.in @@ -1,403 +1,415 @@ /* config.h.in. Generated from configure.ac by autoheader. */ /* Define if building universal (internal helper macro) */ #undef AC_APPLE_UNIVERSAL_BUILD /* Define in built-in ELF support is used */ #undef BUILTIN_ELF /* Define for ELF core file support */ #undef ELFCORE /* Define to 1 if you have the `asctime_r' function. */ #undef HAVE_ASCTIME_R /* Define to 1 if you have the `asprintf' function. */ #undef HAVE_ASPRINTF /* Define to 1 if you have the `ctime_r' function. */ #undef HAVE_CTIME_R /* HAVE_DAYLIGHT */ #undef HAVE_DAYLIGHT /* Define to 1 if you have the declaration of `daylight', and to 0 if you don't. */ #undef HAVE_DECL_DAYLIGHT /* Define to 1 if you have the declaration of `tzname', and to 0 if you don't. */ #undef HAVE_DECL_TZNAME /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_ERR_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the `fmtcheck' function. */ #undef HAVE_FMTCHECK /* Define to 1 if you have the `fork' function. */ #undef HAVE_FORK /* Define to 1 if you have the `freelocale' function. */ #undef HAVE_FREELOCALE /* Define to 1 if fseeko (and presumably ftello) exists and is declared. */ #undef HAVE_FSEEKO /* Define to 1 if you have the `getline' function. */ #undef HAVE_GETLINE /* Define to 1 if you have the header file. */ #undef HAVE_GETOPT_H /* Define to 1 if you have the `getopt_long' function. */ #undef HAVE_GETOPT_LONG /* Define to 1 if you have the `getpagesize' function. */ #undef HAVE_GETPAGESIZE +/* Define to 1 if you have the `gmtime_r' function. */ +#undef HAVE_GMTIME_R + /* Define to 1 if the system has the type `intptr_t'. */ #undef HAVE_INTPTR_T /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the `gnurx' library (-lgnurx). */ #undef HAVE_LIBGNURX /* Define to 1 if you have the `z' library (-lz). */ #undef HAVE_LIBZ /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H +/* Define to 1 if you have the `localtime_r' function. */ +#undef HAVE_LOCALTIME_R + /* Define to 1 if mbrtowc and mbstate_t are properly declared. */ #undef HAVE_MBRTOWC /* Define to 1 if declares mbstate_t. */ #undef HAVE_MBSTATE_T /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `mkostemp' function. */ #undef HAVE_MKOSTEMP /* Define to 1 if you have the `mkstemp' function. */ #undef HAVE_MKSTEMP /* Define to 1 if you have a working `mmap' system call. */ #undef HAVE_MMAP /* Define to 1 if you have the `newlocale' function. */ #undef HAVE_NEWLOCALE /* Define to 1 if you have the `pread' function. */ #undef HAVE_PREAD /* Define to 1 if you have the `setlocale' function. */ #undef HAVE_SETLOCALE +/* Define to 1 if you have the header file. */ +#undef HAVE_SIGNAL_H + +/* Have sig_t type */ +#undef HAVE_SIG_T + /* Define to 1 if you have the header file. */ #undef HAVE_STDDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strcasestr' function. */ #undef HAVE_STRCASESTR /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strlcat' function. */ #undef HAVE_STRLCAT /* Define to 1 if you have the `strlcpy' function. */ #undef HAVE_STRLCPY /* Define to 1 if you have the `strndup' function. */ #undef HAVE_STRNDUP /* Define to 1 if you have the `strtof' function. */ #undef HAVE_STRTOF /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL /* HAVE_STRUCT_OPTION */ #undef HAVE_STRUCT_OPTION /* Define to 1 if `st_rdev' is a member of `struct stat'. */ #undef HAVE_STRUCT_STAT_ST_RDEV /* Define to 1 if `tm_gmtoff' is a member of `struct tm'. */ #undef HAVE_STRUCT_TM_TM_GMTOFF /* Define to 1 if `tm_zone' is a member of `struct tm'. */ #undef HAVE_STRUCT_TM_TM_ZONE /* Define to 1 if you have the header file. */ #undef HAVE_SYS_MMAN_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_UTIME_H /* Define to 1 if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* HAVE_TM_ISDST */ #undef HAVE_TM_ISDST /* HAVE_TM_ZONE */ #undef HAVE_TM_ZONE /* HAVE_TZNAME */ #undef HAVE_TZNAME /* Define to 1 if the system has the type `uintptr_t'. */ #undef HAVE_UINTPTR_T /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the `uselocale' function. */ #undef HAVE_USELOCALE /* Define to 1 if you have the `utime' function. */ #undef HAVE_UTIME /* Define to 1 if you have the `utimes' function. */ #undef HAVE_UTIMES /* Define to 1 if you have the header file. */ #undef HAVE_UTIME_H /* Define to 1 if you have the `vasprintf' function. */ #undef HAVE_VASPRINTF /* Define to 1 if you have the `vfork' function. */ #undef HAVE_VFORK /* Define to 1 if you have the header file. */ #undef HAVE_VFORK_H /* Define to 1 or 0, depending whether the compiler supports simple visibility declarations. */ #undef HAVE_VISIBILITY /* Define to 1 if you have the header file. */ #undef HAVE_WCHAR_H /* Define to 1 if you have the header file. */ #undef HAVE_WCTYPE_H /* Define to 1 if you have the `wcwidth' function. */ #undef HAVE_WCWIDTH /* Define to 1 if `fork' works. */ #undef HAVE_WORKING_FORK /* Define to 1 if `vfork' works. */ #undef HAVE_WORKING_VFORK /* Define to 1 if you have the header file. */ #undef HAVE_XLOCALE_H /* Define to 1 if you have the header file. */ #undef HAVE_ZLIB_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Define to 1 if `major', `minor', and `makedev' are declared in . */ #undef MAJOR_IN_MKDEV /* Define to 1 if `major', `minor', and `makedev' are declared in . */ #undef MAJOR_IN_SYSMACROS /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Enable extensions on AIX 3, Interix. */ #ifndef _ALL_SOURCE # undef _ALL_SOURCE #endif /* Enable GNU extensions on systems that have them. */ #ifndef _GNU_SOURCE # undef _GNU_SOURCE #endif /* Enable threading extensions on Solaris. */ #ifndef _POSIX_PTHREAD_SEMANTICS # undef _POSIX_PTHREAD_SEMANTICS #endif /* Enable extensions on HP NonStop. */ #ifndef _TANDEM_SOURCE # undef _TANDEM_SOURCE #endif /* Enable general extensions on Solaris. */ #ifndef __EXTENSIONS__ # undef __EXTENSIONS__ #endif /* Version number of package */ #undef VERSION /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel). */ #if defined AC_APPLE_UNIVERSAL_BUILD # if defined __BIG_ENDIAN__ # define WORDS_BIGENDIAN 1 # endif #else # ifndef WORDS_BIGENDIAN # undef WORDS_BIGENDIAN # endif #endif /* Enable large inode numbers on Mac OS X 10.5. */ #ifndef _DARWIN_USE_64_BIT_INODE # define _DARWIN_USE_64_BIT_INODE 1 #endif /* Number of bits in a file offset, on hosts where this is settable. */ #undef _FILE_OFFSET_BITS /* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */ #undef _LARGEFILE_SOURCE /* Define for large files, on AIX-style hosts. */ #undef _LARGE_FILES /* Define to 1 if on MINIX. */ #undef _MINIX /* Define to 2 if the system does not provide POSIX.1 features except with this defined. */ #undef _POSIX_1_SOURCE /* Define to 1 if you need to in order for `stat' and other things to work. */ #undef _POSIX_SOURCE /* Define for Solaris 2.5.1 so the uint32_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT32_T /* Define for Solaris 2.5.1 so the uint64_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT64_T /* Define for Solaris 2.5.1 so the uint8_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT8_T /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to the type of a signed integer type of width exactly 32 bits if such a type exists and the standard includes do not define it. */ #undef int32_t /* Define to the type of a signed integer type of width exactly 64 bits if such a type exists and the standard includes do not define it. */ #undef int64_t /* Define to the type of a signed integer type wide enough to hold a pointer, if such a type exists, and if the system does not define it. */ #undef intptr_t /* Define to a type if does not define. */ #undef mbstate_t /* Define to `long int' if does not define. */ #undef off_t /* Define to `int' if does not define. */ #undef pid_t /* Define to `unsigned int' if does not define. */ #undef size_t /* Define to the type of an unsigned integer type of width exactly 16 bits if such a type exists and the standard includes do not define it. */ #undef uint16_t /* Define to the type of an unsigned integer type of width exactly 32 bits if such a type exists and the standard includes do not define it. */ #undef uint32_t /* Define to the type of an unsigned integer type of width exactly 64 bits if such a type exists and the standard includes do not define it. */ #undef uint64_t /* Define to the type of an unsigned integer type of width exactly 8 bits if such a type exists and the standard includes do not define it. */ #undef uint8_t /* Define to the type of an unsigned integer type wide enough to hold a pointer, if such a type exists, and if the system does not define it. */ #undef uintptr_t /* Define as `fork' if `vfork' does not work. */ #undef vfork diff --git a/contrib/file/configure b/contrib/file/configure index 3cf1d770bbf6..e77c3b0ad08f 100755 --- a/contrib/file/configure +++ b/contrib/file/configure @@ -1,16837 +1,16875 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for file 5.22. +# Generated by GNU Autoconf 2.69 for file 5.23. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: christos@astron.com about your system, including any $0: error possibly output before this message. Then install $0: a modern shell, or manually run the script under such a $0: shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='file' PACKAGE_TARNAME='file' -PACKAGE_VERSION='5.22' -PACKAGE_STRING='file 5.22' +PACKAGE_VERSION='5.23' +PACKAGE_STRING='file 5.23' PACKAGE_BUGREPORT='christos@astron.com' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_header_list= ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS IS_CROSS_COMPILE_FALSE IS_CROSS_COMPILE_TRUE LIBOBJS HAVE_VISIBILITY CFLAG_VISIBILITY OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP NM ac_ct_DUMPBIN DUMPBIN LD FGREP SED LIBTOOL LN_S EGREP GREP CPP am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC WARNINGS FSECT5_FALSE FSECT5_TRUE fsect pkgdatadir MINGW_FALSE MINGW_TRUE MINGW host_os host_vendor host_cpu host build_os build_vendor build_cpu build AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_elf enable_elf_core enable_fsect_man5 enable_dependency_tracking enable_static with_pic enable_shared enable_fast_install with_gnu_ld with_sysroot enable_libtool_lock enable_largefile enable_warnings ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures file 5.22 to adapt to many kinds of systems. +\`configure' configures file 5.23 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/file] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of file 5.22:";; + short | recursive ) echo "Configuration of file 5.23:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-elf disable builtin ELF support --disable-elf-core disable ELF core file support --enable-fsect-man5 enable file formats in man section 5 --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-largefile omit support for large files --disable-warnings disable compiler warnings Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -file configure 5.22 +file configure 5.23 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ---------------------------------- ## ## Report this to christos@astron.com ## ## ---------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_type # ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES # ---------------------------------------------------- # Tries to find if the field MEMBER exists in type AGGR, after including # INCLUDES, setting cache variable VAR accordingly. ac_fn_c_check_member () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 $as_echo_n "checking for $2.$3... " >&6; } if eval \${$4+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (sizeof ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else eval "$4=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$4 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_member # ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES # --------------------------------------------- # Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR # accordingly. ac_fn_c_check_decl () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack as_decl_name=`echo $2|sed 's/ *(.*//'` as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 $as_echo_n "checking whether $as_decl_name is declared... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { #ifndef $as_decl_name #ifdef __cplusplus (void) $as_decl_use; #else (void) $as_decl_name; #endif #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_decl # ac_fn_c_find_uintX_t LINENO BITS VAR # ------------------------------------ # Finds an unsigned integer type with width BITS, setting cache variable VAR # accordingly. ac_fn_c_find_uintX_t () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 $as_echo_n "checking for uint$2_t... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" # Order is important - never check a type that is potentially smaller # than half of the expected target width. for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : case $ac_type in #( uint$2_t) : eval "$3=yes" ;; #( *) : eval "$3=\$ac_type" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if eval test \"x\$"$3"\" = x"no"; then : else break fi done fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_find_uintX_t # ac_fn_c_find_intX_t LINENO BITS VAR # ----------------------------------- # Finds a signed integer type with width BITS, setting cache variable VAR # accordingly. ac_fn_c_find_intX_t () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 $as_echo_n "checking for int$2_t... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" # Order is important - never check a type that is potentially smaller # than half of the expected target width. for ac_type in int$2_t 'int' 'long int' \ 'long long int' 'short int' 'signed char'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default enum { N = $2 / 2 - 1 }; int main () { static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default enum { N = $2 / 2 - 1 }; int main () { static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else case $ac_type in #( int$2_t) : eval "$3=yes" ;; #( *) : eval "$3=\$ac_type" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if eval test \"x\$"$3"\" = x"no"; then : else break fi done fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_find_intX_t cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by file $as_me 5.22, which was +It was created by file $as_me 5.23, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi as_fn_append ac_header_list " stdlib.h" as_fn_append ac_header_list " unistd.h" as_fn_append ac_header_list " sys/param.h" # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version='1.14' +am__api_version='1.15' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='file' - VERSION='5.22' + VERSION='5.23' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi + # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=0;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' ac_config_headers="$ac_config_headers config.h" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builtin ELF support" >&5 $as_echo_n "checking for builtin ELF support... " >&6; } # Check whether --enable-elf was given. if test "${enable_elf+set}" = set; then : enableval=$enable_elf; if test "${enableval}" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define BUILTIN_ELF 1" >>confdefs.h else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else # enable by default { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define BUILTIN_ELF 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ELF core file support" >&5 $as_echo_n "checking for ELF core file support... " >&6; } # Check whether --enable-elf-core was given. if test "${enable_elf_core+set}" = set; then : enableval=$enable_elf_core; if test "${enableval}" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define ELFCORE 1" >>confdefs.h else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else # enable by default { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define ELFCORE 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file formats in man section 5" >&5 $as_echo_n "checking for file formats in man section 5... " >&6; } # Check whether --enable-fsect-man5 was given. if test "${enable_fsect_man5+set}" = set; then : enableval=$enable_fsect_man5; if test "${enableval}" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fsect=5 else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fsect=4 fi else # disable by default { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fsect=4 fi # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac case "$host_os" in mingw32*) MINGW=1 ;; *) MINGW=0 ;; esac if test "$MINGW" = 1; then MINGW_TRUE= MINGW_FALSE='#' else MINGW_TRUE='#' MINGW_FALSE= fi pkgdatadir='$(datadir)/misc' if test x$fsect = x5; then FSECT5_TRUE= FSECT5_FALSE='#' else FSECT5_TRUE='#' FSECT5_FALSE= fi DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi case $ac_cv_prog_cc_stdc in #( no) : ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( *) : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 $as_echo_n "checking for $CC option to accept ISO C99... " >&6; } if ${ac_cv_prog_cc_c99+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include #include // Check varargs macros. These examples are taken from C99 6.10.3.5. #define debug(...) fprintf (stderr, __VA_ARGS__) #define showlist(...) puts (#__VA_ARGS__) #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) static void test_varargs_macros (void) { int x = 1234; int y = 5678; debug ("Flag"); debug ("X = %d\n", x); showlist (The first, second, and third items.); report (x>y, "x is %d but y is %d", x, y); } // Check long long types. #define BIG64 18446744073709551615ull #define BIG32 4294967295ul #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) #if !BIG_OK your preprocessor is broken; #endif #if BIG_OK #else your preprocessor is broken; #endif static long long int bignum = -9223372036854775807LL; static unsigned long long int ubignum = BIG64; struct incomplete_array { int datasize; double data[]; }; struct named_init { int number; const wchar_t *name; double average; }; typedef const char *ccp; static inline int test_restrict (ccp restrict text) { // See if C++-style comments work. // Iterate through items via the restricted pointer. // Also check for declarations in for loops. for (unsigned int i = 0; *(text+i) != '\0'; ++i) continue; return 0; } // Check varargs and va_copy. static void test_varargs (const char *format, ...) { va_list args; va_start (args, format); va_list args_copy; va_copy (args_copy, args); const char *str; int number; float fnumber; while (*format) { switch (*format++) { case 's': // string str = va_arg (args_copy, const char *); break; case 'd': // int number = va_arg (args_copy, int); break; case 'f': // float fnumber = va_arg (args_copy, double); break; default: break; } } va_end (args_copy); va_end (args); } int main () { // Check bool. _Bool success = false; // Check restrict. if (test_restrict ("String literal") == 0) success = true; char *restrict newvar = "Another string"; // Check varargs. test_varargs ("s, d' f .", "string", 65, 34.234); test_varargs_macros (); // Check flexible array members. struct incomplete_array *ia = malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); ia->datasize = 10; for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; // Check named initializers. struct named_init ni = { .number = 34, .name = L"Test wide string", .average = 543.34343, }; ni.number = 58; int dynamic_array[ni.number]; dynamic_array[ni.number - 1] = 543; // work around unused variable warnings return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' || dynamic_array[ni.number - 1] != 543); ; return 0; } _ACEOF for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99 do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c99=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c99" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c99" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 $as_echo "$ac_cv_prog_cc_c99" >&6; } ;; esac if test "x$ac_cv_prog_cc_c99" != xno; then : ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 else ac_cv_prog_cc_stdc=no fi fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 $as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } if ${ac_cv_prog_cc_stdc+:} false; then : $as_echo_n "(cached) " >&6 fi case $ac_cv_prog_cc_stdc in #( no) : { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; #( '') : { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; #( *) : { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 $as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" if test "x$ac_cv_header_minix_config_h" = xyes; then : MINIX=yes else MINIX= fi if test "$MINIX" = yes; then $as_echo "#define _POSIX_SOURCE 1" >>confdefs.h $as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h $as_echo "#define _MINIX 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 $as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } if ${ac_cv_safe_to_define___extensions__+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ # define __EXTENSIONS__ 1 $ac_includes_default int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_safe_to_define___extensions__=yes else ac_cv_safe_to_define___extensions__=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 $as_echo "$ac_cv_safe_to_define___extensions__" >&6; } test $ac_cv_safe_to_define___extensions__ = yes && $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h $as_echo "#define _ALL_SOURCE 1" >>confdefs.h $as_echo "#define _GNU_SOURCE 1" >>confdefs.h $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 $as_echo_n "checking whether byte ordering is bigendian... " >&6; } if ${ac_cv_c_bigendian+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_c_bigendian=unknown # See if we're dealing with a universal compiler. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef __APPLE_CC__ not a universal capable compiler #endif typedef int dummy; _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # Check for potential -arch flags. It is not universal unless # there are at least two -arch flags with different values. ac_arch= ac_prev= for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do if test -n "$ac_prev"; then case $ac_word in i?86 | x86_64 | ppc | ppc64) if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then ac_arch=$ac_word else ac_cv_c_bigendian=universal break fi ;; esac ac_prev= elif test "x$ac_word" = "x-arch"; then ac_prev=arch fi done fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_c_bigendian = unknown; then # See if sys/param.h defines the BYTE_ORDER macro. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { #if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ && LITTLE_ENDIAN) bogus endian macros #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # It does; now see whether it defined to BIG_ENDIAN or not. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes else ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test $ac_cv_c_bigendian = unknown; then # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { #if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) bogus endian macros #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # It does; now see whether it defined to _BIG_ENDIAN or not. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { #ifndef _BIG_ENDIAN not big endian #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes else ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test $ac_cv_c_bigendian = unknown; then # Compile a test program. if test "$cross_compiling" = yes; then : # Try to guess by grepping values from an object file. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; int use_ascii (int i) { return ascii_mm[i] + ascii_ii[i]; } short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; int use_ebcdic (int i) { return ebcdic_mm[i] + ebcdic_ii[i]; } extern int foo; int main () { return use_ascii (foo) == use_ebcdic (foo); ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then ac_cv_c_bigendian=yes fi if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then if test "$ac_cv_c_bigendian" = unknown; then ac_cv_c_bigendian=no else # finding both strings is unlikely to happen, but who knows? ac_cv_c_bigendian=unknown fi fi fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { /* Are we little or big endian? From Harbison&Steele. */ union { long int l; char c[sizeof (long int)]; } u; u.l = 1; return u.c[sizeof (long int) - 1] == 1; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_c_bigendian=no else ac_cv_c_bigendian=yes fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 $as_echo "$ac_cv_c_bigendian" >&6; } case $ac_cv_c_bigendian in #( yes) $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h ;; #( no) ;; #( universal) $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h ;; #( *) as_fn_error $? "unknown endianness presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.2' macro_revision='1.3337' ltmain="$ac_aux_dir/ltmain.sh" # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=no fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac else pic_mode=default fi test -z "$pic_mode" && pic_mode=yes enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: CFLAG_VISIBILITY= HAVE_VISIBILITY=0 if test -n "$GCC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the -Werror option is usable" >&5 $as_echo_n "checking whether the -Werror option is usable... " >&6; } if ${gl_cv_cc_vis_werror+:} false; then : $as_echo_n "(cached) " >&6 else gl_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -Werror" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : gl_cv_cc_vis_werror=yes else gl_cv_cc_vis_werror=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS="$gl_save_CFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_vis_werror" >&5 $as_echo "$gl_cv_cc_vis_werror" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for simple visibility declarations" >&5 $as_echo_n "checking for simple visibility declarations... " >&6; } if ${gl_cv_cc_visibility+:} false; then : $as_echo_n "(cached) " >&6 else gl_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fvisibility=hidden" if test $gl_cv_cc_vis_werror = yes; then CFLAGS="$CFLAGS -Werror" fi cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ extern __attribute__((__visibility__("hidden"))) int hiddenvar; extern __attribute__((__visibility__("default"))) int exportedvar; extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void); extern __attribute__((__visibility__("default"))) int exportedfunc (void); void dummyfunc (void) {} int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : gl_cv_cc_visibility=yes else gl_cv_cc_visibility=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS="$gl_save_CFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_visibility" >&5 $as_echo "$gl_cv_cc_visibility" >&6; } if test $gl_cv_cc_visibility = yes; then CFLAG_VISIBILITY="-fvisibility=hidden" HAVE_VISIBILITY=1 fi fi cat >>confdefs.h <<_ACEOF #define HAVE_VISIBILITY $HAVE_VISIBILITY _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/types.h defines makedev" >&5 $as_echo_n "checking whether sys/types.h defines makedev... " >&6; } if ${ac_cv_header_sys_types_h_makedev+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return makedev(0, 0); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_header_sys_types_h_makedev=yes else ac_cv_header_sys_types_h_makedev=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_types_h_makedev" >&5 $as_echo "$ac_cv_header_sys_types_h_makedev" >&6; } if test $ac_cv_header_sys_types_h_makedev = no; then ac_fn_c_check_header_mongrel "$LINENO" "sys/mkdev.h" "ac_cv_header_sys_mkdev_h" "$ac_includes_default" if test "x$ac_cv_header_sys_mkdev_h" = xyes; then : $as_echo "#define MAJOR_IN_MKDEV 1" >>confdefs.h fi if test $ac_cv_header_sys_mkdev_h = no; then ac_fn_c_check_header_mongrel "$LINENO" "sys/sysmacros.h" "ac_cv_header_sys_sysmacros_h" "$ac_includes_default" if test "x$ac_cv_header_sys_sysmacros_h" = xyes; then : $as_echo "#define MAJOR_IN_SYSMACROS 1" >>confdefs.h fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 $as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } if ${ac_cv_header_sys_wait_h+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main () { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_sys_wait_h=yes else ac_cv_header_sys_wait_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 $as_echo "$ac_cv_header_sys_wait_h" >&6; } if test $ac_cv_header_sys_wait_h = yes; then $as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h fi for ac_header in stdint.h fcntl.h locale.h stdint.h inttypes.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in stddef.h utime.h wchar.h wctype.h limits.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done -for ac_header in getopt.h err.h xlocale.h +for ac_header in getopt.h err.h xlocale.h signal.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in sys/mman.h sys/stat.h sys/types.h sys/utime.h sys/time.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in zlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" if test "x$ac_cv_header_zlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_ZLIB_H 1 _ACEOF fi done +ac_fn_c_check_type "$LINENO" "sig_t" "ac_cv_type_sig_t" " +#ifdef HAVE_SIGNAL_H +#include +#endif +" +if test "x$ac_cv_type_sig_t" = xyes; then : + +$as_echo "#define HAVE_SIG_T 1" >>confdefs.h + +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if ${ac_cv_c_const+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __cplusplus /* Ultrix mips cc rejects this sort of thing. */ typedef int charset[2]; const charset cs = { 0, 0 }; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this sort of thing. */ char tx; char *t = &tx; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; } bx; struct s *b = &bx; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" if test "x$ac_cv_type_off_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define off_t long int _ACEOF fi ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" if test "x$ac_cv_type_size_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default" if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_STAT_ST_RDEV 1 _ACEOF fi ac_fn_c_check_member "$LINENO" "struct tm" "tm_gmtoff" "ac_cv_member_struct_tm_tm_gmtoff" "$ac_includes_default" if test "x$ac_cv_member_struct_tm_tm_gmtoff" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_TM_TM_GMTOFF 1 _ACEOF fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } if ${ac_cv_struct_tm+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { struct tm tm; int *p = &tm.tm_sec; return !p; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm=time.h else ac_cv_struct_tm=sys/time.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then $as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h fi ac_fn_c_check_member "$LINENO" "struct tm" "tm_zone" "ac_cv_member_struct_tm_tm_zone" "#include #include <$ac_cv_struct_tm> " if test "x$ac_cv_member_struct_tm_tm_zone" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_TM_TM_ZONE 1 _ACEOF fi if test "$ac_cv_member_struct_tm_tm_zone" = yes; then $as_echo "#define HAVE_TM_ZONE 1" >>confdefs.h else ac_fn_c_check_decl "$LINENO" "tzname" "ac_cv_have_decl_tzname" "#include " if test "x$ac_cv_have_decl_tzname" = xyes; then : ac_have_decl=1 else ac_have_decl=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_TZNAME $ac_have_decl _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tzname" >&5 $as_echo_n "checking for tzname... " >&6; } if ${ac_cv_var_tzname+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #if !HAVE_DECL_TZNAME extern char *tzname[]; #endif int main () { return tzname[0][0]; ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_var_tzname=yes else ac_cv_var_tzname=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_tzname" >&5 $as_echo "$ac_cv_var_tzname" >&6; } if test $ac_cv_var_tzname = yes; then $as_echo "#define HAVE_TZNAME 1" >>confdefs.h fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tm_zone in struct tm" >&5 $as_echo_n "checking for tm_zone in struct tm... " >&6; } if ${ac_cv_struct_tm_zone+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include <$ac_cv_struct_tm> int main () { struct tm tm; tm.tm_zone; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm_zone=yes else ac_cv_struct_tm_zone=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm_zone" >&5 $as_echo "$ac_cv_struct_tm_zone" >&6; } if test "$ac_cv_struct_tm_zone" = yes; then $as_echo "#define HAVE_TM_ZONE 1" >>confdefs.h fi # On SGI, apparently tzname is a #define, but that's ok, AC_CHECK_DECL will # consider it declared and we won't give our own extern. ac_fn_c_check_decl "$LINENO" "tzname" "ac_cv_have_decl_tzname" "#include " if test "x$ac_cv_have_decl_tzname" = xyes; then : ac_have_decl=1 else ac_have_decl=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_TZNAME $ac_have_decl _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tzname" >&5 $as_echo_n "checking for tzname... " >&6; } if ${ac_cv_var_tzname+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #if !HAVE_DECL_TZNAME extern char *tzname[]; #endif int main () { return tzname[0][0]; ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_var_tzname=yes else ac_cv_var_tzname=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_tzname" >&5 $as_echo "$ac_cv_var_tzname" >&6; } if test $ac_cv_var_tzname = yes; then $as_echo "#define HAVE_TZNAME 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tm_isdst in struct tm" >&5 $as_echo_n "checking for tm_isdst in struct tm... " >&6; } if ${ac_cv_struct_tm_isdst+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include <$ac_cv_struct_tm> int main () { struct tm tm; tm.tm_isdst; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm_isdst=yes else ac_cv_struct_tm_isdst=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm_isdst" >&5 $as_echo "$ac_cv_struct_tm_isdst" >&6; } if test "$ac_cv_struct_tm_isdst" = yes; then $as_echo "#define HAVE_TM_ISDST 1" >>confdefs.h fi ac_fn_c_check_decl "$LINENO" "daylight" "ac_cv_have_decl_daylight" "#include " if test "x$ac_cv_have_decl_daylight" = xyes; then : ac_have_decl=1 else ac_have_decl=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_DAYLIGHT $ac_have_decl _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking for daylight" >&5 $as_echo_n "checking for daylight... " >&6; } if ${ac_cv_var_daylight+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #if !HAVE_DECL_DAYLIGHT extern int daylight; #endif int main () { atoi(daylight); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_var_daylight=yes else ac_cv_var_daylight=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_daylight" >&5 $as_echo "$ac_cv_var_daylight" >&6; } if test $ac_cv_var_daylight = yes; then $as_echo "#define HAVE_DAYLIGHT 1" >>confdefs.h fi # Check whether --enable-largefile was given. if test "${enable_largefile+set}" = set; then : enableval=$enable_largefile; fi if test "$enable_largefile" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 $as_echo_n "checking for special C compiler options needed for large files... " >&6; } if ${ac_cv_sys_largefile_CC+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_sys_largefile_CC=no if test "$GCC" != yes; then ac_save_CC=$CC while :; do # IRIX 6.2 and later do not support large files by default, # so use the C compiler's -n32 option if that helps. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : break fi rm -f core conftest.err conftest.$ac_objext CC="$CC -n32" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_sys_largefile_CC=' -n32'; break fi rm -f core conftest.err conftest.$ac_objext break done CC=$ac_save_CC rm -f conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5 $as_echo "$ac_cv_sys_largefile_CC" >&6; } if test "$ac_cv_sys_largefile_CC" != no; then CC=$CC$ac_cv_sys_largefile_CC fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 $as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } if ${ac_cv_sys_file_offset_bits+:} false; then : $as_echo_n "(cached) " >&6 else while :; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_sys_file_offset_bits=no; break fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _FILE_OFFSET_BITS 64 #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_sys_file_offset_bits=64; break fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_sys_file_offset_bits=unknown break done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 $as_echo "$ac_cv_sys_file_offset_bits" >&6; } case $ac_cv_sys_file_offset_bits in #( no | unknown) ;; *) cat >>confdefs.h <<_ACEOF #define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits _ACEOF ;; esac rm -rf conftest* if test $ac_cv_sys_file_offset_bits = unknown; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 $as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } if ${ac_cv_sys_large_files+:} false; then : $as_echo_n "(cached) " >&6 else while :; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_sys_large_files=no; break fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _LARGE_FILES 1 #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_sys_large_files=1; break fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_sys_large_files=unknown break done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 $as_echo "$ac_cv_sys_large_files" >&6; } case $ac_cv_sys_large_files in #( no | unknown) ;; *) cat >>confdefs.h <<_ACEOF #define _LARGE_FILES $ac_cv_sys_large_files _ACEOF ;; esac rm -rf conftest* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGEFILE_SOURCE value needed for large files" >&5 $as_echo_n "checking for _LARGEFILE_SOURCE value needed for large files... " >&6; } if ${ac_cv_sys_largefile_source+:} false; then : $as_echo_n "(cached) " >&6 else while :; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include /* for off_t */ #include int main () { int (*fp) (FILE *, off_t, int) = fseeko; return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_sys_largefile_source=no; break fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _LARGEFILE_SOURCE 1 #include /* for off_t */ #include int main () { int (*fp) (FILE *, off_t, int) = fseeko; return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_sys_largefile_source=1; break fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_cv_sys_largefile_source=unknown break done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_source" >&5 $as_echo "$ac_cv_sys_largefile_source" >&6; } case $ac_cv_sys_largefile_source in #( no | unknown) ;; *) cat >>confdefs.h <<_ACEOF #define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source _ACEOF ;; esac rm -rf conftest* # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug # in glibc 2.1.3, but that breaks too many other things. # If you want fseeko and ftello with glibc, upgrade to a fixed glibc. if test $ac_cv_sys_largefile_source != unknown; then $as_echo "#define HAVE_FSEEKO 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mbstate_t" >&5 $as_echo_n "checking for mbstate_t... " >&6; } if ${ac_cv_type_mbstate_t+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default # include int main () { mbstate_t x; return sizeof x; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_type_mbstate_t=yes else ac_cv_type_mbstate_t=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_mbstate_t" >&5 $as_echo "$ac_cv_type_mbstate_t" >&6; } if test $ac_cv_type_mbstate_t = yes; then $as_echo "#define HAVE_MBSTATE_T 1" >>confdefs.h else $as_echo "#define mbstate_t int" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct option in getopt" >&5 $as_echo_n "checking for struct option in getopt... " >&6; } if ${ac_cv_struct_option_getopt_h+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { struct option op; op.name; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_option_getopt_h=yes else ac_cv_struct_option_getopt_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_option_getopt_h" >&5 $as_echo "$ac_cv_struct_option_getopt_h" >&6; } if test "$ac_cv_struct_option_getopt_h" = yes; then $as_echo "#define HAVE_STRUCT_OPTION 1" >>confdefs.h fi ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" if test "x$ac_cv_type_pid_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define pid_t int _ACEOF fi ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t" case $ac_cv_c_uint8_t in #( no|yes) ;; #( *) $as_echo "#define _UINT8_T 1" >>confdefs.h cat >>confdefs.h <<_ACEOF #define uint8_t $ac_cv_c_uint8_t _ACEOF ;; esac ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t" case $ac_cv_c_uint16_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define uint16_t $ac_cv_c_uint16_t _ACEOF ;; esac ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" case $ac_cv_c_uint32_t in #( no|yes) ;; #( *) $as_echo "#define _UINT32_T 1" >>confdefs.h cat >>confdefs.h <<_ACEOF #define uint32_t $ac_cv_c_uint32_t _ACEOF ;; esac ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t" case $ac_cv_c_int32_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define int32_t $ac_cv_c_int32_t _ACEOF ;; esac ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" case $ac_cv_c_uint64_t in #( no|yes) ;; #( *) $as_echo "#define _UINT64_T 1" >>confdefs.h cat >>confdefs.h <<_ACEOF #define uint64_t $ac_cv_c_uint64_t _ACEOF ;; esac ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" case $ac_cv_c_int64_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define int64_t $ac_cv_c_int64_t _ACEOF ;; esac ac_fn_c_check_type "$LINENO" "intptr_t" "ac_cv_type_intptr_t" "$ac_includes_default" if test "x$ac_cv_type_intptr_t" = xyes; then : $as_echo "#define HAVE_INTPTR_T 1" >>confdefs.h else for ac_type in 'int' 'long int' 'long long int'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >>confdefs.h <<_ACEOF #define intptr_t $ac_type _ACEOF ac_type= fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test -z "$ac_type" && break done fi ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default" if test "x$ac_cv_type_uintptr_t" = xyes; then : $as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h else for ac_type in 'unsigned int' 'unsigned long int' \ 'unsigned long long int'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >>confdefs.h <<_ACEOF #define uintptr_t $ac_type _ACEOF ac_type= fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test -z "$ac_type" && break done fi for ac_header in $ac_header_list do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in getpagesize do : ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize" if test "x$ac_cv_func_getpagesize" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_GETPAGESIZE 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5 $as_echo_n "checking for working mmap... " >&6; } if ${ac_cv_func_mmap_fixed_mapped+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_mmap_fixed_mapped=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default /* malloc might have been renamed as rpl_malloc. */ #undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: mmap private not fixed mmap private fixed at somewhere currently unmapped mmap private fixed at somewhere already mapped mmap shared not fixed mmap shared fixed at somewhere currently unmapped mmap shared fixed at somewhere already mapped For private mappings, we should verify that changes cannot be read() back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ #include #include #if !defined STDC_HEADERS && !defined HAVE_STDLIB_H char *malloc (); #endif /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ int main () { char *data, *data2, *data3; const char *cdata2; int i, pagesize; int fd, fd2; pagesize = getpagesize (); /* First, make a file with some known garbage in it. */ data = (char *) malloc (pagesize); if (!data) return 1; for (i = 0; i < pagesize; ++i) *(data + i) = rand (); umask (0); fd = creat ("conftest.mmap", 0600); if (fd < 0) return 2; if (write (fd, data, pagesize) != pagesize) return 3; close (fd); /* Next, check that the tail of a page is zero-filled. File must have non-zero length, otherwise we risk SIGBUS for entire page. */ fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600); if (fd2 < 0) return 4; cdata2 = ""; if (write (fd2, cdata2, 1) != 1) return 5; data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L); if (data2 == MAP_FAILED) return 6; for (i = 0; i < pagesize; ++i) if (*(data2 + i)) return 7; close (fd2); if (munmap (data2, pagesize)) return 8; /* Next, try to mmap the file at a fixed address which already has something else allocated at it. If we can, also make sure that we see the same garbage. */ fd = open ("conftest.mmap", O_RDWR); if (fd < 0) return 9; if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) return 10; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) return 11; /* Finally, make sure that changes to the mapped area do not percolate back to the file as seen by read(). (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = (char *) malloc (pagesize); if (!data3) return 12; if (read (fd, data3, pagesize) != pagesize) return 13; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) return 14; close (fd); return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_mmap_fixed_mapped=yes else ac_cv_func_mmap_fixed_mapped=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5 $as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } if test $ac_cv_func_mmap_fixed_mapped = yes; then $as_echo "#define HAVE_MMAP 1" >>confdefs.h fi rm -f conftest.mmap conftest.txt for ac_header in vfork.h do : ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" if test "x$ac_cv_header_vfork_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_VFORK_H 1 _ACEOF fi done for ac_func in fork vfork do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done if test "x$ac_cv_func_fork" = xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 $as_echo_n "checking for working fork... " >&6; } if ${ac_cv_func_fork_works+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_fork_works=cross else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { /* By Ruediger Kuhlmann. */ return fork () < 0; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_fork_works=yes else ac_cv_func_fork_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 $as_echo "$ac_cv_func_fork_works" >&6; } else ac_cv_func_fork_works=$ac_cv_func_fork fi if test "x$ac_cv_func_fork_works" = xcross; then case $host in *-*-amigaos* | *-*-msdosdjgpp*) # Override, as these systems have only a dummy fork() stub ac_cv_func_fork_works=no ;; *) ac_cv_func_fork_works=yes ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 $as_echo_n "checking for working vfork... " >&6; } if ${ac_cv_func_vfork_works+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_vfork_works=cross else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ $ac_includes_default #include #ifdef HAVE_VFORK_H # include #endif /* On some sparc systems, changes by the child to local and incoming argument registers are propagated back to the parent. The compiler is told about this with #include , but some compilers (e.g. gcc -O) don't grok . Test for this by using a static variable whose address is put into a register that is clobbered by the vfork. */ static void #ifdef __cplusplus sparc_address_test (int arg) # else sparc_address_test (arg) int arg; #endif { static pid_t child; if (!child) { child = vfork (); if (child < 0) { perror ("vfork"); _exit(2); } if (!child) { arg = getpid(); write(-1, "", 0); _exit (arg); } } } int main () { pid_t parent = getpid (); pid_t child; sparc_address_test (0); child = vfork (); if (child == 0) { /* Here is another test for sparc vfork register problems. This test uses lots of local variables, at least as many local variables as main has allocated so far including compiler temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should reuse the register of parent for one of the local variables, since it will think that parent can't possibly be used any more in this routine. Assigning to the local variable will thus munge parent in the parent process. */ pid_t p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); /* Convince the compiler that p..p7 are live; otherwise, it might use the same hardware register for all 8 local variables. */ if (p != p1 || p != p2 || p != p3 || p != p4 || p != p5 || p != p6 || p != p7) _exit(1); /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent from child file descriptors. If the child closes a descriptor before it execs or exits, this munges the parent's descriptor as well. Test for this by closing stdout in the child. */ _exit(close(fileno(stdout)) != 0); } else { int status; struct stat st; while (wait(&status) != child) ; return ( /* Was there some problem with vforking? */ child < 0 /* Did the child fail? (This shouldn't happen.) */ || status /* Did the vfork/compiler bug occur? */ || parent != getpid() /* Did the file descriptor bug occur? */ || fstat(fileno(stdout), &st) != 0 ); } } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_vfork_works=yes else ac_cv_func_vfork_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 $as_echo "$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_vfork_works=$ac_cv_func_vfork { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} fi if test "x$ac_cv_func_vfork_works" = xyes; then $as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h else $as_echo "#define vfork fork" >>confdefs.h fi if test "x$ac_cv_func_fork_works" = xyes; then $as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5 $as_echo_n "checking whether mbrtowc and mbstate_t are properly declared... " >&6; } if ${ac_cv_func_mbrtowc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { wchar_t wc; char const s[] = ""; size_t n = 1; mbstate_t state; return ! (sizeof state && (mbrtowc) (&wc, s, n, &state)); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_func_mbrtowc=yes else ac_cv_func_mbrtowc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5 $as_echo "$ac_cv_func_mbrtowc" >&6; } if test $ac_cv_func_mbrtowc = yes; then $as_echo "#define HAVE_MBRTOWC 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc compiler warnings" >&5 $as_echo_n "checking for gcc compiler warnings... " >&6; } # Check whether --enable-warnings was given. if test "${enable_warnings+set}" = set; then : enableval=$enable_warnings; if test "${enableval}" = no -o "$GCC" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } WARNINGS= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } WARNINGS="-Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith \ -Wmissing-declarations -Wredundant-decls -Wnested-externs \ -Wsign-compare -Wreturn-type -Wswitch -Wshadow \ -Wcast-qual -Wwrite-strings -Wextra -Wunused-parameter -Wformat=2" fi else if test "$GCC" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } WARNINGS="-Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith \ -Wmissing-declarations -Wredundant-decls -Wnested-externs \ -Wsign-compare -Wreturn-type -Wswitch -Wshadow \ -Wcast-qual -Wwrite-strings -Wextra -Wunused-parameter -Wformat=2" else WARNINGS= { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi for ac_func in strerror strndup strtoul mkstemp mkostemp utimes utime wcwidth strtof newlocale uselocale freelocale setlocale do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_fn_c_check_func "$LINENO" "getopt_long" "ac_cv_func_getopt_long" if test "x$ac_cv_func_getopt_long" = xyes; then : $as_echo "#define HAVE_GETOPT_LONG 1" >>confdefs.h else case " $LIBOBJS " in *" getopt_long.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS getopt_long.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "asprintf" "ac_cv_func_asprintf" if test "x$ac_cv_func_asprintf" = xyes; then : $as_echo "#define HAVE_ASPRINTF 1" >>confdefs.h else case " $LIBOBJS " in *" asprintf.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS asprintf.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "vasprintf" "ac_cv_func_vasprintf" if test "x$ac_cv_func_vasprintf" = xyes; then : $as_echo "#define HAVE_VASPRINTF 1" >>confdefs.h else case " $LIBOBJS " in *" vasprintf.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS vasprintf.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "strlcpy" "ac_cv_func_strlcpy" if test "x$ac_cv_func_strlcpy" = xyes; then : $as_echo "#define HAVE_STRLCPY 1" >>confdefs.h else case " $LIBOBJS " in *" strlcpy.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS strlcpy.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "strlcat" "ac_cv_func_strlcat" if test "x$ac_cv_func_strlcat" = xyes; then : $as_echo "#define HAVE_STRLCAT 1" >>confdefs.h else case " $LIBOBJS " in *" strlcat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS strlcat.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "getline" "ac_cv_func_getline" if test "x$ac_cv_func_getline" = xyes; then : $as_echo "#define HAVE_GETLINE 1" >>confdefs.h else case " $LIBOBJS " in *" getline.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS getline.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "ctime_r" "ac_cv_func_ctime_r" if test "x$ac_cv_func_ctime_r" = xyes; then : $as_echo "#define HAVE_CTIME_R 1" >>confdefs.h else case " $LIBOBJS " in *" ctime_r.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS ctime_r.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "asctime_r" "ac_cv_func_asctime_r" if test "x$ac_cv_func_asctime_r" = xyes; then : $as_echo "#define HAVE_ASCTIME_R 1" >>confdefs.h else case " $LIBOBJS " in *" asctime_r.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS asctime_r.$ac_objext" ;; esac fi +ac_fn_c_check_func "$LINENO" "localtime_r" "ac_cv_func_localtime_r" +if test "x$ac_cv_func_localtime_r" = xyes; then : + $as_echo "#define HAVE_LOCALTIME_R 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" localtime_r.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS localtime_r.$ac_objext" + ;; +esac + +fi + +ac_fn_c_check_func "$LINENO" "gmtime_r" "ac_cv_func_gmtime_r" +if test "x$ac_cv_func_gmtime_r" = xyes; then : + $as_echo "#define HAVE_GMTIME_R 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" gmtime_r.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS gmtime_r.$ac_objext" + ;; +esac + +fi + ac_fn_c_check_func "$LINENO" "pread" "ac_cv_func_pread" if test "x$ac_cv_func_pread" = xyes; then : $as_echo "#define HAVE_PREAD 1" >>confdefs.h else case " $LIBOBJS " in *" pread.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS pread.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "strcasestr" "ac_cv_func_strcasestr" if test "x$ac_cv_func_strcasestr" = xyes; then : $as_echo "#define HAVE_STRCASESTR 1" >>confdefs.h else case " $LIBOBJS " in *" strcasestr.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS strcasestr.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "fmtcheck" "ac_cv_func_fmtcheck" if test "x$ac_cv_func_fmtcheck" = xyes; then : $as_echo "#define HAVE_FMTCHECK 1" >>confdefs.h else case " $LIBOBJS " in *" fmtcheck.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS fmtcheck.$ac_objext" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gzopen in -lz" >&5 $as_echo_n "checking for gzopen in -lz... " >&6; } if ${ac_cv_lib_z_gzopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lz $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char gzopen (); int main () { return gzopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_z_gzopen=yes else ac_cv_lib_z_gzopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_gzopen" >&5 $as_echo "$ac_cv_lib_z_gzopen" >&6; } if test "x$ac_cv_lib_z_gzopen" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBZ 1 _ACEOF LIBS="-lz $LIBS" fi if test "$MINGW" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for regexec in -lgnurx" >&5 $as_echo_n "checking for regexec in -lgnurx... " >&6; } if ${ac_cv_lib_gnurx_regexec+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lgnurx $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char regexec (); int main () { return regexec (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_gnurx_regexec=yes else ac_cv_lib_gnurx_regexec=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gnurx_regexec" >&5 $as_echo "$ac_cv_lib_gnurx_regexec" >&6; } if test "x$ac_cv_lib_gnurx_regexec" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBGNURX 1 _ACEOF LIBS="-lgnurx $LIBS" else as_fn_error $? "libgnurx is required to build file(1) with MinGW" "$LINENO" 5 fi fi if test "$cross_compiling" = yes; then IS_CROSS_COMPILE_TRUE= IS_CROSS_COMPILE_FALSE='#' else IS_CROSS_COMPILE_TRUE='#' IS_CROSS_COMPILE_FALSE= fi ac_config_files="$ac_config_files Makefile src/Makefile magic/Makefile tests/Makefile doc/Makefile python/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MINGW_TRUE}" && test -z "${MINGW_FALSE}"; then as_fn_error $? "conditional \"MINGW\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${FSECT5_TRUE}" && test -z "${FSECT5_FALSE}"; then as_fn_error $? "conditional \"FSECT5\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${IS_CROSS_COMPILE_TRUE}" && test -z "${IS_CROSS_COMPILE_FALSE}"; then as_fn_error $? "conditional \"IS_CROSS_COMPILE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by file $as_me 5.22, which was +This file was extended by file $as_me 5.23, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -file config.status 5.22 +file config.status 5.23 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "magic/Makefile") CONFIG_FILES="$CONFIG_FILES magic/Makefile" ;; "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "python/Makefile") CONFIG_FILES="$CONFIG_FILES python/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="" # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff --git a/contrib/file/configure.ac b/contrib/file/configure.ac index 1e2457c12146..857b7fe6ec44 100644 --- a/contrib/file/configure.ac +++ b/contrib/file/configure.ac @@ -1,156 +1,160 @@ dnl Process this file with autoconf to produce a configure script. -AC_INIT([file],[5.22],[christos@astron.com]) +AC_INIT([file],[5.23],[christos@astron.com]) AM_INIT_AUTOMAKE([subdir-objects foreign]) m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_MACRO_DIR([m4]) AC_MSG_CHECKING(for builtin ELF support) AC_ARG_ENABLE(elf, [ --disable-elf disable builtin ELF support], [if test "${enableval}" = yes; then AC_MSG_RESULT(yes) AC_DEFINE([BUILTIN_ELF], 1, [Define if built-in ELF support is used]) else AC_MSG_RESULT(no) fi], [ # enable by default AC_MSG_RESULT(yes) AC_DEFINE([BUILTIN_ELF], 1, [Define in built-in ELF support is used]) ]) AC_MSG_CHECKING(for ELF core file support) AC_ARG_ENABLE(elf-core, [ --disable-elf-core disable ELF core file support], [if test "${enableval}" = yes; then AC_MSG_RESULT(yes) AC_DEFINE([ELFCORE], 1, [Define for ELF core file support]) else AC_MSG_RESULT(no) fi], [ # enable by default AC_MSG_RESULT(yes) AC_DEFINE([ELFCORE], 1, [Define for ELF core file support]) ]) AC_MSG_CHECKING(for file formats in man section 5) AC_ARG_ENABLE(fsect-man5, [ --enable-fsect-man5 enable file formats in man section 5], [if test "${enableval}" = yes; then AC_MSG_RESULT(yes) fsect=5 else AC_MSG_RESULT(no) fsect=4 fi], [ # disable by default AC_MSG_RESULT(no) fsect=4 ]) AC_CANONICAL_HOST case "$host_os" in mingw32*) MINGW=1 ;; *) MINGW=0 ;; esac AC_SUBST(MINGW) AM_CONDITIONAL(MINGW, test "$MINGW" = 1) AC_SUBST([pkgdatadir], ['$(datadir)/misc']) AC_SUBST(fsect) AM_CONDITIONAL(FSECT5, test x$fsect = x5) AC_SUBST(WARNINGS) dnl Checks for programs. AC_PROG_CC_STDC AC_USE_SYSTEM_EXTENSIONS AM_PROG_CC_C_O AC_C_BIGENDIAN AC_PROG_INSTALL AC_PROG_LN_S LT_INIT([disable-static pic-only]) gl_VISIBILITY dnl Checks for headers AC_HEADER_STDC AC_HEADER_MAJOR AC_HEADER_SYS_WAIT AC_CHECK_HEADERS(stdint.h fcntl.h locale.h stdint.h inttypes.h unistd.h) AC_CHECK_HEADERS(stddef.h utime.h wchar.h wctype.h limits.h) -AC_CHECK_HEADERS(getopt.h err.h xlocale.h) +AC_CHECK_HEADERS(getopt.h err.h xlocale.h signal.h) AC_CHECK_HEADERS(sys/mman.h sys/stat.h sys/types.h sys/utime.h sys/time.h) AC_CHECK_HEADERS(zlib.h) +AC_CHECK_TYPE([sig_t],[AC_DEFINE([HAVE_SIG_T],1,[Have sig_t type])],,[ +#ifdef HAVE_SIGNAL_H +#include +#endif]) dnl Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_TYPE_OFF_T AC_TYPE_SIZE_T AC_CHECK_MEMBERS([struct stat.st_rdev]) AC_CHECK_MEMBERS([struct tm.tm_gmtoff]) AC_STRUCT_TIMEZONE AC_STRUCT_TIMEZONE_DAYLIGHT AC_SYS_LARGEFILE AC_FUNC_FSEEKO AC_TYPE_MBSTATE_T AC_STRUCT_OPTION_GETOPT_H AC_TYPE_PID_T AC_TYPE_UINT8_T AC_TYPE_UINT16_T AC_TYPE_UINT32_T AC_TYPE_INT32_T AC_TYPE_UINT64_T AC_TYPE_INT64_T AC_TYPE_INTPTR_T AC_TYPE_UINTPTR_T AC_FUNC_MMAP AC_FUNC_FORK AC_FUNC_MBRTOWC AC_MSG_CHECKING(for gcc compiler warnings) AC_ARG_ENABLE(warnings, [ --disable-warnings disable compiler warnings], [if test "${enableval}" = no -o "$GCC" = no; then AC_MSG_RESULT(no) WARNINGS= else AC_MSG_RESULT(yes) WARNINGS="-Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith \ -Wmissing-declarations -Wredundant-decls -Wnested-externs \ -Wsign-compare -Wreturn-type -Wswitch -Wshadow \ -Wcast-qual -Wwrite-strings -Wextra -Wunused-parameter -Wformat=2" fi], [ if test "$GCC" = yes; then AC_MSG_RESULT(yes) WARNINGS="-Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith \ -Wmissing-declarations -Wredundant-decls -Wnested-externs \ -Wsign-compare -Wreturn-type -Wswitch -Wshadow \ -Wcast-qual -Wwrite-strings -Wextra -Wunused-parameter -Wformat=2" else WARNINGS= AC_MSG_RESULT(no) fi]) dnl Checks for functions AC_CHECK_FUNCS(strerror strndup strtoul mkstemp mkostemp utimes utime wcwidth strtof newlocale uselocale freelocale setlocale) dnl Provide implementation of some required functions if necessary -AC_REPLACE_FUNCS(getopt_long asprintf vasprintf strlcpy strlcat getline ctime_r asctime_r pread strcasestr fmtcheck) +AC_REPLACE_FUNCS(getopt_long asprintf vasprintf strlcpy strlcat getline ctime_r asctime_r localtime_r gmtime_r pread strcasestr fmtcheck) dnl Checks for libraries AC_CHECK_LIB(z,gzopen) if test "$MINGW" = 1; then AC_CHECK_LIB(gnurx,regexec,,AC_MSG_ERROR([libgnurx is required to build file(1) with MinGW])) fi dnl See if we are cross-compiling AM_CONDITIONAL(IS_CROSS_COMPILE, test "$cross_compiling" = yes) AC_CONFIG_FILES([Makefile src/Makefile magic/Makefile tests/Makefile doc/Makefile python/Makefile]) AC_OUTPUT diff --git a/contrib/file/depcomp b/contrib/file/depcomp index 4ebd5b3a2f2d..fc98710e2a1d 100755 --- a/contrib/file/depcomp +++ b/contrib/file/depcomp @@ -1,791 +1,791 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: diff --git a/contrib/file/doc/Makefile.in b/contrib/file/doc/Makefile.in index 8d0fa7b8df61..165918a5e42a 100644 --- a/contrib/file/doc/Makefile.in +++ b/contrib/file/doc/Makefile.in @@ -1,669 +1,681 @@ -# Makefile.in generated by automake 1.14 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" \ "$(DESTDIR)$(man4dir)" "$(DESTDIR)$(man5dir)" man3dir = $(mandir)/man3 man4dir = $(mandir)/man4 man5dir = $(mandir)/man5 NROFF = nroff MANS = $(man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) pkgdatadir = @pkgdatadir@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ HAVE_VISIBILITY = @HAVE_VISIBILITY@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MINGW = @MINGW@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WARNINGS = @WARNINGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ fsect = @fsect@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ MAGIC = $(pkgdatadir)/magic @FSECT5_FALSE@man_MAGIC = magic.4 @FSECT5_TRUE@man_MAGIC = magic.5 man_MANS = file.1 $(man_MAGIC) libmagic.3 EXTRA_DIST = file.man magic.man libmagic.man CLEANFILES = $(man_MANS) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) install-man3: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man3dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.3[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ done; } uninstall-man3: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man3dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.3[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) install-man4: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man4dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man4dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man4dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.4[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^4][0-9a-z]*$$,4,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man4dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man4dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man4dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man4dir)" || exit $$?; }; \ done; } uninstall-man4: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man4dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.4[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^4][0-9a-z]*$$,4,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man4dir)'; $(am__uninstall_files_from_dir) install-man5: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man5dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.5[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ done; } uninstall-man5: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man5dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.5[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man4dir)" "$(DESTDIR)$(man5dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-man3 install-man4 install-man5 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 uninstall-man3 uninstall-man4 \ uninstall-man5 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-man3 install-man4 install-man5 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am uninstall-man uninstall-man1 \ uninstall-man3 uninstall-man4 uninstall-man5 +.PRECIOUS: Makefile + file.1: Makefile file.man @rm -f $@ sed -e s@__CSECTION__@1@g \ -e s@__FSECTION__@${fsect}@g \ -e s@__VERSION__@${VERSION}@g \ -e s@__MAGIC__@${MAGIC}@g $(srcdir)/file.man > $@ magic.${fsect}: Makefile magic.man @rm -f $@ sed -e s@__CSECTION__@1@g \ -e s@__FSECTION__@${fsect}@g \ -e s@__VERSION__@${VERSION}@g \ -e s@__MAGIC__@${MAGIC}@g $(srcdir)/magic.man > $@ libmagic.3: Makefile libmagic.man @rm -f $@ sed -e s@__CSECTION__@1@g \ -e s@__FSECTION__@${fsect}@g \ -e s@__VERSION__@${VERSION}@g \ -e s@__MAGIC__@${MAGIC}@g $(srcdir)/libmagic.man > $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/contrib/file/doc/file.man b/contrib/file/doc/file.man index 109c67686111..d4d3e58bf6ea 100644 --- a/contrib/file/doc/file.man +++ b/contrib/file/doc/file.man @@ -1,635 +1,663 @@ -.\" $File: file.man,v 1.111 2014/12/16 23:18:40 christos Exp $ -.Dd December 16, 2014 +.\" $File: file.man,v 1.117 2015/06/03 19:51:27 christos Exp $ +.Dd June 3, 2015 .Dt FILE __CSECTION__ .Os .Sh NAME .Nm file .Nd determine file type .Sh SYNOPSIS .Nm .Bk -words -.Op Fl bcEhiklLNnprsvz0 +.Op Fl bcEhiklLNnprsvzZ0 .Op Fl Fl apple +.Op Fl Fl extension .Op Fl Fl mime-encoding .Op Fl Fl mime-type .Op Fl e Ar testname .Op Fl F Ar separator .Op Fl f Ar namefile .Op Fl m Ar magicfiles .Op Fl P Ar name=value .Ar .Ek .Nm .Fl C .Op Fl m Ar magicfiles .Nm .Op Fl Fl help .Sh DESCRIPTION This manual page documents version __VERSION__ of the .Nm command. .Pp .Nm tests each argument in an attempt to classify it. There are three sets of tests, performed in this order: filesystem tests, magic tests, and language tests. The .Em first test that succeeds causes the file type to be printed. .Pp The type printed will usually contain one of the words .Em text (the file contains only printing characters and a few common control characters and is probably safe to read on an .Dv ASCII terminal), .Em executable (the file contains the result of compiling a program in a form understandable to some .Tn UNIX kernel or another), or .Em data meaning anything else (data is usually .Dq binary or non-printable). Exceptions are well-known file formats (core files, tar archives) that are known to contain binary data. When modifying magic files or the program itself, make sure to .Em "preserve these keywords" . Users depend on knowing that all the readable files in a directory have the word .Dq text printed. Don't do as Berkeley did and change .Dq shell commands text to .Dq shell script . .Pp The filesystem tests are based on examining the return from a .Xr stat 2 system call. The program checks to see if the file is empty, or if it's some sort of special file. Any known file types appropriate to the system you are running on (sockets, symbolic links, or named pipes (FIFOs) on those systems that implement them) are intuited if they are defined in the system header file .In sys/stat.h . .Pp The magic tests are used to check for files with data in particular fixed formats. The canonical example of this is a binary executable (compiled program) .Dv a.out file, whose format is defined in .In elf.h , .In a.out.h and possibly .In exec.h in the standard include directory. These files have a .Dq "magic number" stored in a particular place near the beginning of the file that tells the .Tn UNIX operating system that the file is a binary executable, and which of several types thereof. The concept of a .Dq "magic" has been applied by extension to data files. Any file with some invariant identifier at a small fixed offset into the file can usually be described in this way. The information identifying these files is read from the compiled magic file .Pa __MAGIC__.mgc , or the files in the directory .Pa __MAGIC__ if the compiled file does not exist. In addition, if .Pa $HOME/.magic.mgc or .Pa $HOME/.magic exists, it will be used in preference to the system magic files. .Pp If a file does not match any of the entries in the magic file, it is examined to see if it seems to be a text file. ASCII, ISO-8859-x, non-ISO 8-bit extended-ASCII character sets (such as those used on Macintosh and IBM PC systems), UTF-8-encoded Unicode, UTF-16-encoded Unicode, and EBCDIC character sets can be distinguished by the different ranges and sequences of bytes that constitute printable text in each set. If a file passes any of these tests, its character set is reported. ASCII, ISO-8859-x, UTF-8, and extended-ASCII files are identified as .Dq text because they will be mostly readable on nearly any terminal; UTF-16 and EBCDIC are only .Dq character data because, while they contain text, it is text that will require translation before it can be read. In addition, .Nm will attempt to determine other characteristics of text-type files. If the lines of a file are terminated by CR, CRLF, or NEL, instead of the Unix-standard LF, this will be reported. Files that contain embedded escape sequences or overstriking will also be identified. .Pp Once .Nm has determined the character set used in a text-type file, it will attempt to determine in what language the file is written. The language tests look for particular strings (cf. .In names.h ) that can appear anywhere in the first few blocks of a file. For example, the keyword .Em .br indicates that the file is most likely a .Xr troff 1 input file, just as the keyword .Em struct indicates a C program. These tests are less reliable than the previous two groups, so they are performed last. The language test routines also test for some miscellany (such as .Xr tar 1 archives). .Pp Any file that cannot be identified as having been written in any of the character sets listed above is simply said to be .Dq data . .Sh OPTIONS .Bl -tag -width indent .It Fl Fl apple Causes the file command to output the file type and creator code as used by older MacOS versions. The code consists of eight letters, the first describing the file type, the latter the creator. .It Fl b , Fl Fl brief Do not prepend filenames to output lines (brief mode). .It Fl C , Fl Fl compile Write a .Pa magic.mgc output file that contains a pre-parsed version of the magic file or directory. .It Fl c , Fl Fl checking-printout Cause a checking printout of the parsed form of the magic file. This is usually used in conjunction with the .Fl m flag to debug a new magic file before installing it. .It Fl E On filesystem errors (file not found etc), instead of handling the error as regular output as POSIX mandates and keep going, issue an error message and exit. .It Fl e , Fl Fl exclude Ar testname Exclude the test named in .Ar testname from the list of tests made to determine the file type. Valid test names are: .Bl -tag -width compress .It apptype .Dv EMX application type (only on EMX). .It ascii Various types of text files (this test will try to guess the text encoding, irrespective of the setting of the .Sq encoding option). .It encoding Different text encodings for soft magic tests. .It tokens Ignored for backwards compatibility. .It cdf Prints details of Compound Document Files. .It compress Checks for, and looks inside, compressed files. .It elf Prints ELF file details. .It soft Consults magic files. .It tar Examines tar files. .El +.It Fl Fl extension +Print a slash-separated list of valid extensions for the file type found. .It Fl F , Fl Fl separator Ar separator Use the specified string as the separator between the filename and the file result returned. Defaults to .Sq \&: . .It Fl f , Fl Fl files-from Ar namefile Read the names of the files to be examined from .Ar namefile (one per line) before the argument list. Either .Ar namefile or at least one filename argument must be present; to test the standard input, use .Sq - as a filename argument. Please note that .Ar namefile is unwrapped and the enclosed filenames are processed when this option is encountered and before any further options processing is done. This allows one to process multiple lists of files with different command line arguments on the same .Nm invocation. Thus if you want to set the delimiter, you need to do it before you specify the list of files, like: .Dq Fl F Ar @ Fl f Ar namefile , instead of: .Dq Fl f Ar namefile Fl F Ar @ . .It Fl h , Fl Fl no-dereference option causes symlinks not to be followed (on systems that support symbolic links). This is the default if the environment variable .Dv POSIXLY_CORRECT is not defined. .It Fl i , Fl Fl mime Causes the file command to output mime type strings rather than the more traditional human readable ones. Thus it may say .Sq text/plain; charset=us-ascii rather than .Dq ASCII text . .It Fl Fl mime-type , Fl Fl mime-encoding Like .Fl i , but print only the specified element(s). .It Fl k , Fl Fl keep-going Don't stop at the first match, keep going. Subsequent matches will be have the string .Sq "\[rs]012\- " prepended. (If you want a newline, see the .Fl r option.) The magic pattern with the highest strength (see the .Fl l option) comes first. .It Fl l , Fl Fl list Shows a list of patterns and their strength sorted descending by .Xr magic 4 strength which is used for the matching (see also the .Fl k option). .It Fl L , Fl Fl dereference option causes symlinks to be followed, as the like-named option in .Xr ls 1 (on systems that support symbolic links). This is the default if the environment variable .Ev POSIXLY_CORRECT is defined. .It Fl m , Fl Fl magic-file Ar magicfiles Specify an alternate list of files and directories containing magic. This can be a single item, or a colon-separated list. If a compiled magic file is found alongside a file or directory, it will be used instead. .It Fl N , Fl Fl no-pad Don't pad filenames so that they align in the output. .It Fl n , Fl Fl no-buffer Force stdout to be flushed after checking each file. This is only useful if checking a list of files. It is intended to be used by programs that want filetype output from a pipe. .It Fl p , Fl Fl preserve-date On systems that support .Xr utime 3 or .Xr utimes 2 , attempt to preserve the access time of files analyzed, to pretend that .Nm never read them. .It Fl P , Fl Fl parameter Ar name=value Set various parameter limits. .Bl -column "elf_phnum" "Default" "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" -offset indent .It Sy "Name" Ta Sy "Default" Ta Sy "Explanation" .It Li indir Ta 15 Ta recursion limit for indirect magic .It Li name Ta 30 Ta use count limit for name/use magic .It Li elf_notes Ta 256 Ta max ELF notes processed .It Li elf_phnum Ta 128 Ta max ELF program sections processed .It Li elf_shnum Ta 32768 Ta max ELF sections processed .El .It Fl r , Fl Fl raw Don't translate unprintable characters to \eooo. Normally .Nm translates unprintable characters to their octal representation. .It Fl s , Fl Fl special-files Normally, .Nm only attempts to read and determine the type of argument files which .Xr stat 2 reports are ordinary files. This prevents problems, because reading special files may have peculiar consequences. Specifying the .Fl s option causes .Nm to also read argument files which are block or character special files. This is useful for determining the filesystem types of the data in raw disk partitions, which are block special files. This option also causes .Nm to disregard the file size as reported by .Xr stat 2 since on some systems it reports a zero size for raw disk partitions. .It Fl v , Fl Fl version Print the version of the program and exit. .It Fl z , Fl Fl uncompress Try to look inside compressed files. +.It Fl Z , Fl Fl uncompress-noreport +Try to look inside compressed files, but report information about the contents +only not the compression. .It Fl 0 , Fl Fl print0 Output a null character .Sq \e0 after the end of the filename. Nice to .Xr cut 1 the output. This does not affect the separator, which is still printed. .It Fl -help Print a help message and exit. .El .Sh FILES .Bl -tag -width __MAGIC__.mgc -compact .It Pa __MAGIC__.mgc Default compiled list of magic. .It Pa __MAGIC__ Directory containing default magic files. .El .Sh ENVIRONMENT The environment variable .Ev MAGIC can be used to set the default magic file name. If that variable is set, then .Nm will not attempt to open .Pa $HOME/.magic . .Nm adds .Dq Pa .mgc to the value of this variable as appropriate. However, .Pa file has to exist in order for .Pa file.mime to be considered. The environment variable .Ev POSIXLY_CORRECT controls (on systems that support symbolic links), whether .Nm will attempt to follow symlinks or not. If set, then .Nm follows symlink, otherwise it does not. This is also controlled by the .Fl L and .Fl h options. .Sh SEE ALSO .Xr magic __FSECTION__ , .Xr hexdump 1 , .Xr od 1 , .Xr strings 1 , .Xr fstyp 8 .Sh STANDARDS CONFORMANCE This program is believed to exceed the System V Interface Definition of FILE(CMD), as near as one can determine from the vague language contained therein. Its behavior is mostly compatible with the System V program of the same name. This version knows more magic, however, so it will produce different (albeit more accurate) output in many cases. .\" URL: http://www.opengroup.org/onlinepubs/009695399/utilities/file.html .Pp The one significant difference between this version and System V is that this version treats any white space as a delimiter, so that spaces in pattern strings must be escaped. For example, .Bd -literal -offset indent \*[Gt]10 string language impress\ (imPRESS data) .Ed .Pp in an existing magic file would have to be changed to .Bd -literal -offset indent \*[Gt]10 string language\e impress (imPRESS data) .Ed .Pp In addition, in this version, if a pattern string contains a backslash, it must be escaped. For example .Bd -literal -offset indent 0 string \ebegindata Andrew Toolkit document .Ed .Pp in an existing magic file would have to be changed to .Bd -literal -offset indent 0 string \e\ebegindata Andrew Toolkit document .Ed .Pp SunOS releases 3.2 and later from Sun Microsystems include a .Nm command derived from the System V one, but with some extensions. This version differs from Sun's only in minor ways. It includes the extension of the .Sq \*[Am] operator, used as, for example, .Bd -literal -offset indent \*[Gt]16 long\*[Am]0x7fffffff \*[Gt]0 not stripped .Ed .Sh MAGIC DIRECTORY The magic file entries have been collected from various sources, mainly USENET, and contributed by various authors. Christos Zoulas (address below) will collect additional or corrected magic file entries. A consolidation of magic file entries will be distributed periodically. .Pp The order of entries in the magic file is significant. Depending on what system you are using, the order that they are put together may be incorrect. If your old .Nm command uses a magic file, keep the old magic file around for comparison purposes (rename it to .Pa __MAGIC__.orig ) . .Sh EXAMPLES .Bd -literal -offset indent $ file file.c file /dev/{wd0a,hda} file.c: C program text file: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), stripped /dev/wd0a: block special (0/0) /dev/hda: block special (3/0) $ file -s /dev/wd0{b,d} /dev/wd0b: data /dev/wd0d: x86 boot sector $ file -s /dev/hda{,1,2,3,4,5,6,7,8,9,10} /dev/hda: x86 boot sector /dev/hda1: Linux/i386 ext2 filesystem /dev/hda2: x86 boot sector /dev/hda3: x86 boot sector, extended partition table /dev/hda4: Linux/i386 ext2 filesystem /dev/hda5: Linux/i386 swap file /dev/hda6: Linux/i386 swap file /dev/hda7: Linux/i386 swap file /dev/hda8: Linux/i386 swap file /dev/hda9: empty /dev/hda10: empty $ file -i file.c file /dev/{wd0a,hda} file.c: text/x-c file: application/x-executable /dev/hda: application/x-not-regular-file /dev/wd0a: application/x-not-regular-file .Ed .Sh HISTORY There has been a .Nm command in every .Dv UNIX since at least Research Version 4 (man page dated November, 1973). The System V version introduced one significant major change: the external list of magic types. This slowed the program down slightly but made it a lot more flexible. .Pp This program, based on the System V version, was written by Ian Darwin .Aq ian@darwinsys.com without looking at anybody else's source code. .Pp John Gilmore revised the code extensively, making it better than the first version. Geoff Collyer found several inadequacies and provided some magic file entries. Contributions by the .Sq \*[Am] operator by Rob McMahon, .Aq cudcv@warwick.ac.uk , 1989. .Pp Guy Harris, .Aq guy@netapp.com , made many changes from 1993 to the present. 1989. .Pp Primary development and maintenance from 1990 to the present by Christos Zoulas .Aq christos@astron.com . .Pp Altered by Chris Lowth .Aq chris@lowth.com , 2000: handle the .Fl i option to output mime type strings, using an alternative magic file and internal logic. .Pp Altered by Eric Fischer .Aq enf@pobox.com , July, 2000, to identify character codes and attempt to identify the languages of non-ASCII files. .Pp Altered by Reuben Thomas .Aq rrt@sc3d.org , 2007-2011, to improve MIME support, merge MIME and non-MIME magic, support directories as well as files of magic, apply many bug fixes, update and fix a lot of magic, improve the build system, improve the documentation, and rewrite the Python bindings in pure Python. .Pp The list of contributors to the .Sq magic directory (magic files) is too long to include here. You know who you are; thank you. Many contributors are listed in the source files. .Sh LEGAL NOTICE Copyright (c) Ian F. Darwin, Toronto, Canada, 1986-1999. Covered by the standard Berkeley Software Distribution copyright; see the file COPYING in the source distribution. .Pp The files .Pa tar.h and .Pa is_tar.c were written by John Gilmore from his public-domain .Xr tar 1 program, and are not covered by the above license. .Sh RETURN CODE .Nm returns 0 on success, and non-zero on error. .Sh BUGS .Pp Please report bugs and send patches to the bug tracker at .Pa http://bugs.gw.com/ or the mailing list at .Aq file@mx.gw.com (visit .Pa http://mx.gw.com/mailman/listinfo/file first to subscribe). .Sh TODO .Pp Fix output so that tests for MIME and APPLE flags are not needed all over the place, and actual output is only done in one place. This needs a design. Suggestion: push possible outputs on to a list, then pick the last-pushed (most specific, one hopes) value at the end, or use a default if the list is empty. This should not slow down evaluation. .Pp +The handling of +.Dv MAGIC_CONTINUE +and printing \e012- between entries is clumsy and complicated; refactor +and centralize. +.Pp +Some of the encoding logic is hard-coded in encoding.c and can be moved +to the magic files if we had a !:charset annotation +.Pp Continue to squash all magic bugs. See Debian BTS for a good source. .Pp Store arbitrarily long strings, for example for %s patterns, so that they can be printed out. Fixes Debian bug #271672. -Would require more complex store/load code in apprentice. +This can be done by allocating strings in a string pool, storing the +string pool at the end of the magic file and converting all the string +pointers to relative offsets from the string pool. .Pp Add syntax for relative offsets after current level (Debian bug #466037). .Pp Make file -ki work, i.e. give multiple MIME types. .Pp Add a zip library so we can peek inside Office2007 documents to -figure out what they are. +print more details about their contents. .Pp Add an option to print URLs for the sources of the file descriptions. .Pp Combine script searches and add a way to map executable names to MIME types (e.g. have a magic value for !:mime which causes the resulting string to be looked up in a table). This would avoid adding the same magic repeatedly for each new hash-bang interpreter. .Pp +When a file descriptor is available, we can skip and adjust the buffer +instead of the hacky buffer management we do now. +.Pp Fix .Dq name and .Dq use to check for consistency at compile time (duplicate .Dq name , .Dq use pointing to undefined .Dq name ). Make .Dq name / .Dq use more efficient by keeping a sorted list of names. Special-case ^ to flip endianness in the parser so that it does not have to be escaped, and document it. +.Pp +If the offsets specified internally in the file exceed the buffer size +( +.Dv HOWMANY +variable in file.h), then we don't seek to that offset, but we give up. +It would be better if buffer managements was done when the file descriptor +is available so move around the file. +One must be careful though because this has performance (and thus security +considerations). .Sh AVAILABILITY You can obtain the original author's latest version by anonymous FTP on .Pa ftp.astron.com in the directory .Pa /pub/file/file-X.YZ.tar.gz . diff --git a/contrib/file/doc/libmagic.man b/contrib/file/doc/libmagic.man index 3c907cad9b35..64170a31b2ed 100644 --- a/contrib/file/doc/libmagic.man +++ b/contrib/file/doc/libmagic.man @@ -1,383 +1,387 @@ -.\" $File: libmagic.man,v 1.34 2014/12/16 23:18:40 christos Exp $ +.\" $File: libmagic.man,v 1.37 2015/06/03 18:21:24 christos Exp $ .\" .\" Copyright (c) Christos Zoulas 2003. .\" All Rights Reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice immediately at the beginning of the file, without modification, .\" this list of conditions, and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR .\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd December 16, 2014 +.Dd June 3, 2015 .Dt LIBMAGIC 3 .Os .Sh NAME .Nm magic_open , .Nm magic_close , .Nm magic_error , .Nm magic_errno , .Nm magic_descriptor , .Nm magic_buffer , .Nm magic_setflags , .Nm magic_check , .Nm magic_compile , .Nm magic_list , .Nm magic_load , .Nm magic_load_buffers , .Nm magic_setparam , .Nm magic_getparam , .Nm magic_version .Nd Magic number recognition library .Sh LIBRARY .Lb libmagic .Sh SYNOPSIS .In magic.h .Ft magic_t .Fn magic_open "int flags" .Ft void .Fn magic_close "magic_t cookie" .Ft const char * .Fn magic_error "magic_t cookie" .Ft int .Fn magic_errno "magic_t cookie" .Ft const char * .Fn magic_descriptor "magic_t cookie" "int fd" .Ft const char * .Fn magic_file "magic_t cookie" "const char *filename" .Ft const char * .Fn magic_buffer "magic_t cookie" "const void *buffer" "size_t length" .Ft int .Fn magic_setflags "magic_t cookie" "int flags" .Ft int .Fn magic_check "magic_t cookie" "const char *filename" .Ft int .Fn magic_compile "magic_t cookie" "const char *filename" .Ft int .Fn magic_list "magic_t cookie" "const char *filename" .Ft int .Fn magic_load "magic_t cookie" "const char *filename" .Ft int .Fn magic_load_buffers "magic_t cookie" "void **buffers" "size_t *sizes" "size_t nbuffers" .Ft int .Fn magic_getparam "magic_t cookie" "int param" "void *value" .Ft int .Fn magic_setparam "magic_t cookie" "int param" "const void *value" .Ft int .Fn magic_version "void" .Sh DESCRIPTION These functions operate on the magic database file which is described in .Xr magic __FSECTION__ . .Pp The function .Fn magic_open creates a magic cookie pointer and returns it. It returns .Dv NULL if there was an error allocating the magic cookie. The .Ar flags argument specifies how the other magic functions should behave: .Bl -tag -width MAGIC_COMPRESS .It Dv MAGIC_NONE No special handling. .It Dv MAGIC_DEBUG Print debugging messages to stderr. .It Dv MAGIC_SYMLINK If the file queried is a symlink, follow it. .It Dv MAGIC_COMPRESS If the file is compressed, unpack it and look at the contents. .It Dv MAGIC_DEVICES If the file is a block or character special device, then open the device and try to look in its contents. .It Dv MAGIC_MIME_TYPE Return a MIME type string, instead of a textual description. .It Dv MAGIC_MIME_ENCODING Return a MIME encoding, instead of a textual description. .It Dv MAGIC_MIME A shorthand for MAGIC_MIME_TYPE | MAGIC_MIME_ENCODING. .It Dv MAGIC_CONTINUE Return all matches, not just the first. .It Dv MAGIC_CHECK Check the magic database for consistency and print warnings to stderr. .It Dv MAGIC_PRESERVE_ATIME On systems that support .Xr utime 3 or .Xr utimes 2 , attempt to preserve the access time of files analysed. .It Dv MAGIC_RAW Don't translate unprintable characters to a \eooo octal representation. .It Dv MAGIC_ERROR Treat operating system errors while trying to open files and follow symlinks as real errors, instead of printing them in the magic buffer. .It Dv MAGIC_APPLE Return the Apple creator and type. +.It Dv MAGIC_EXTENSION +Return a slash-separated list of extensions for this file type. +.It Dv MAGIC_COMPRESS_TRANSP +Don't report on compression, only report about the uncompressed data. .It Dv MAGIC_NO_CHECK_APPTYPE Don't check for .Dv EMX application type (only on EMX). .It Dv MAGIC_NO_CHECK_CDF Don't get extra information on MS Composite Document Files. .It Dv MAGIC_NO_CHECK_COMPRESS Don't look inside compressed files. .It Dv MAGIC_NO_CHECK_ELF Don't print ELF details. .It Dv MAGIC_NO_CHECK_ENCODING Don't check text encodings. .It Dv MAGIC_NO_CHECK_SOFT Don't consult magic files. .It Dv MAGIC_NO_CHECK_TAR Don't examine tar files. .It Dv MAGIC_NO_CHECK_TEXT Don't check for various types of text files. .It Dv MAGIC_NO_CHECK_TOKENS Don't look for known tokens inside ascii files. .El .Pp The .Fn magic_close function closes the .Xr magic __FSECTION__ database and deallocates any resources used. .Pp The .Fn magic_error function returns a textual explanation of the last error, or .Dv NULL if there was no error. .Pp The .Fn magic_errno function returns the last operating system error number .Pq Xr errno 2 that was encountered by a system call. .Pp The .Fn magic_file function returns a textual description of the contents of the .Ar filename argument, or .Dv NULL if an error occurred. If the .Ar filename is .Dv NULL , then stdin is used. .Pp The .Fn magic_descriptor function returns a textual description of the contents of the .Ar fd argument, or .Dv NULL if an error occurred. .Pp The .Fn magic_buffer function returns a textual description of the contents of the .Ar buffer argument with .Ar length bytes size. .Pp The .Fn magic_setflags function sets the .Ar flags described above. Note that using both MIME flags together can also return extra information on the charset. .Pp The .Fn magic_check function can be used to check the validity of entries in the colon separated database files passed in as .Ar filename , or .Dv NULL for the default database. It returns 0 on success and \-1 on failure. .Pp The .Fn magic_compile function can be used to compile the the colon separated list of database files passed in as .Ar filename , or .Dv NULL for the default database. It returns 0 on success and \-1 on failure. The compiled files created are named from the .Xr basename 1 of each file argument with .Dq .mgc appended to it. .Pp The .Fn magic_list function dumps all magic entries in a human readable format, dumping first the entries that are matched against binary files and then the ones that match text files. It takes and optional .Fa filename argument which is a colon separated list of database files, or .Dv NULL for the default database. .Pp The .Fn magic_load function must be used to load the the colon separated list of database files passed in as .Ar filename , or .Dv NULL for the default database file before any magic queries can performed. .Pp The default database file is named by the MAGIC environment variable. If that variable is not set, the default database file name is __MAGIC__. .Fn magic_load adds .Dq .mgc to the database filename as appropriate. .Pp The .Fn magic_load_buffers function takes an array of size .Fa nbuffers of .Fa buffers with a respective size for each in the array of .Fa sizes loaded with the contents of the magic databases from the filesystem. This function can be used in environment where the magic library does not have direct access to the filesystem, but can access the magic database via shared memory or other IPC means. .Pp The .Fn magic_getparam and .Fn magic_setparam allow getting and setting various limits related to the the magic library. .Bl -column "MAGIC_PARAM_ELF_PHNUM_MAX" "size_t" "Default" -offset indent .It Sy "Parameter" Ta Sy "Type" Ta Sy "Default" .It Li MAGIC_PARAM_INDIR_MAX Ta size_t Ta 15 .It Li MAGIC_PARAM_NAME_MAX Ta size_t Ta 30 .It Li MAGIC_PARAM_ELF_NOTES_MAX Ta size_t Ta 256 .It Li MAGIC_PARAM_ELF_PHNUM_MAX Ta size_t Ta 128 .It Li MAGIC_PARAM_ELF_SHNUM_MAX Ta size_t Ta 32768 .El .Pp The .Dv MAGIC_PARAM_INDIR_RECURSION parameter controls how many levels of recursion will be followed for indirect magic entries. .Pp The .Dv MAGIC_PARAM_NAME_RECURSION parameter controls how many levels of recursion will be followed for for name/use calls. .Pp The .Dv MAGIC_PARAM_NAME_MAX parameter controls the maximum number of calls for name/use. .Pp The .Dv MAGIC_PARAM_NOTES_MAX parameter controls how many ELF notes will be processed. .Pp The .Dv MAGIC_PARAM_PHNUM_MAX parameter controls how many ELF program sections will be processed. .Pp The .Dv MAGIC_PARAM_SHNUM_MAX parameter controls how many ELF sections will be processed. .Pp The .Fn magic_version command returns the version number of this library which is compiled into the shared library using the constant .Dv MAGIC_VERSION from .In magic.h . This can be used by client programs to verify that the version they compile against is the same as the version that they run against. .Sh RETURN VALUES The function .Fn magic_open returns a magic cookie on success and .Dv NULL on failure setting errno to an appropriate value. It will set errno to .Er EINVAL if an unsupported value for flags was given. The .Fn magic_list , .Fn magic_load , .Fn magic_compile , and .Fn magic_check functions return 0 on success and \-1 on failure. The .Fn magic_buffer , .Fn magic_getpath , and .Fn magic_file , functions return a string on success and .Dv NULL on failure. The .Fn magic_error function returns a textual description of the errors of the above functions, or .Dv NULL if there was no error. The .Fn magic_version always returns the version number of the library. Finally, .Fn magic_setflags returns \-1 on systems that don't support .Xr utime 3 , or .Xr utimes 2 when .Dv MAGIC_PRESERVE_ATIME is set. .Sh FILES .Bl -tag -width __MAGIC__.mgc -compact .It Pa __MAGIC__ The non-compiled default magic database. .It Pa __MAGIC__.mgc The compiled default magic database. .El .Sh SEE ALSO .Xr file __CSECTION__ , .Xr magic __FSECTION__ .Sh AUTHORS .An M\(oans Rullg\(oard Initial libmagic implementation, and configuration. .An Christos Zoulas API cleanup, error code and allocation handling. diff --git a/contrib/file/ltmain.sh b/contrib/file/ltmain.sh index f53abfd976e2..f07ffc8b3c18 100755 --- a/contrib/file/ltmain.sh +++ b/contrib/file/ltmain.sh @@ -1,9664 +1,9668 @@ # libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4.2 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION=2.4.2 TIMESTAMP="" package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" unset CP unset MV unset RM : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-warning|--no-warn) opt_warning=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" + if test -f "$inst_prefix_dir$libdir/$linklib"; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= versuffix2= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" versuffix2="$major.$age" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= versuffix2= else versuffix=".0.0" versuffix2=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= versuffix2= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-mirbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix versuffix2_save=$versuffix2 major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" versuffix2="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save versuffix2=$versuffix2_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then # Remove ${wl} instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" func_resolve_sysroot "$deplib" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 diff --git a/contrib/file/magic/Magdir/android b/contrib/file/magic/Magdir/android index da98b576e70a..7675c1cd24ea 100644 --- a/contrib/file/magic/Magdir/android +++ b/contrib/file/magic/Magdir/android @@ -1,139 +1,145 @@ #------------------------------------------------------------ -# $File: android,v 1.7 2014/11/10 05:08:23 christos Exp $ +# $File: android,v 1.8 2015/03/19 18:04:37 christos Exp $ # Various android related magic entries #------------------------------------------------------------ # Dalvik .dex format. http://retrodev.com/android/dexformat.html # From "Mike Fleming" # Fixed to avoid regexec 17 errors on some dex files # From "Tim Strazzere" 0 string dex\n >0 regex dex\n[0-9]{2}\0 Dalvik dex file >4 string >000 version %s 0 string dey\n >0 regex dey\n[0-9]{2}\0 Dalvik dex file (optimized for host) >4 string >000 version %s # Android bootimg format # From https://android.googlesource.com/\ # platform/system/core/+/master/mkbootimg/bootimg.h 0 string ANDROID! Android bootimg >1024 string LOKI\01 \b, LOKI'd >8 lelong >0 \b, kernel >>12 lelong >0 \b (0x%x) >16 lelong >0 \b, ramdisk >>20 lelong >0 \b (0x%x) >24 lelong >0 \b, second stage >>28 lelong >0 \b (0x%x) >36 lelong >0 \b, page size: %d >38 string >0 \b, name: %s >64 string >0 \b, cmdline (%s) # Android Backup archive # From: Ariel Shkedi # File extension: .ab # No mime-type defined # URL: https://github.com/android/platform_frameworks_base/blob/\ # 0bacfd2ba68d21a68a3df345b830bc2a1e515b5a/services/java/com/\ # android/server/BackupManagerService.java#L2367 # After the header comes a tar file # If compressed, the entire tar file is compressed with JAVA deflate # # Include the version number hardcoded with the magic string to avoid # false positives 0 string/b ANDROID\ BACKUP\n1\n Android Backup >17 string 0\n \b, Not-Compressed >17 string 1\n \b, Compressed # any string as long as it's not the word none (which is matched below) >>19 regex/1l \^([^n\n]|n[^o]|no[^n]|non[^e]|none.+).* \b, Encrypted (%s) >>19 string none\n \b, Not-Encrypted # Commented out because they don't seem useful to print # (but they are part of the header - the tar file comes after them): #>>>&1 regex/1l .* \b, Password salt: %s #>>>>&1 regex/1l .* \b, Master salt: %s #>>>>>&1 regex/1l .* \b, PBKDF2 rounds: %s #>>>>>>&1 regex/1l .* \b, IV: %s #>>>>>>>&1 regex/1l .* \b, Key: %s # *.pit files by Joerg Jenderek # http://forum.xda-developers.com/showthread.php?p=9122369 # http://forum.xda-developers.com/showthread.php?t=816449 # Partition Information Table for Samsung's smartphone with Android # used by flash software Odin 0 ulelong 0x12349876 # 1st pit entry marker >0x01C ulequad&0xFFFFFFFCFFFFFFFC =0x0000000000000000 # minimal 13 and maximal 18 PIT entries found >>4 ulelong <128 Partition Information Table for Samsung smartphone >>>4 ulelong x \b, %d entries # 1. pit entry >>>4 ulelong >0 \b; #1 >>>0x01C use PIT-entry >>>4 ulelong >1 \b; #2 >>>0x0A0 use PIT-entry >>>4 ulelong >2 \b; #3 >>>0x124 use PIT-entry >>>4 ulelong >3 \b; #4 >>>0x1A8 use PIT-entry >>>4 ulelong >4 \b; #5 >>>0x22C use PIT-entry >>>4 ulelong >5 \b; #6 >>>0x2B0 use PIT-entry >>>4 ulelong >6 \b; #7 >>>0x334 use PIT-entry >>>4 ulelong >7 \b; #8 >>>0x3B8 use PIT-entry >>>4 ulelong >8 \b; #9 >>>0x43C use PIT-entry >>>4 ulelong >9 \b; #10 >>>0x4C0 use PIT-entry >>>4 ulelong >10 \b; #11 >>>0x544 use PIT-entry >>>4 ulelong >11 \b; #12 >>>0x5C8 use PIT-entry >>>4 ulelong >12 \b; #13 >>>>0x64C use PIT-entry # 14. pit entry >>>4 ulelong >13 \b; #14 >>>>0x6D0 use PIT-entry >>>4 ulelong >14 \b; #15 >>>0x754 use PIT-entry >>>4 ulelong >15 \b; #16 >>>0x7D8 use PIT-entry >>>4 ulelong >16 \b; #17 >>>0x85C use PIT-entry # 18. pit entry >>>4 ulelong >17 \b; #18 >>>0x8E0 use PIT-entry 0 name PIT-entry # garbage value implies end of pit entries >0x00 ulequad&0xFFFFFFFCFFFFFFFC =0x0000000000000000 # skip empty partition name >>0x24 ubyte !0 # partition name >>>0x24 string >\0 %-.32s # flags >>>0x0C ulelong&0x00000002 2 \b+RW # partition ID: # 0~IPL,MOVINAND,GANG;1~PIT,GPT;2~HIDDEN;3~SBL,HIDDEN;4~SBL2,HIDDEN;5~BOOT;6~KENREl,RECOVER,misc;7~RECOVER # ;11~MODEM;20~efs;21~PARAM;22~FACTORY,SYSTEM;23~DBDATAFS,USERDATA;24~CACHE;80~BOOTLOADER;81~TZSW >>>0x08 ulelong x (0x%x) # filename >>>0x44 string >\0 "%-.64s" #>>>0x18 ulelong >0 # blocksize in 512 byte units ? #>>>>0x18 ulelong x \b, %db # partition size in blocks ? #>>>>0x22 ulelong x \b*%d # Android bootimg format # From https://android.googlesource.com/\ # platform/system/core/+/master/libsparse/sparse_format.h 0 lelong 0xed26ff3a Android sparse image >4 leshort x \b, version: %d >6 leshort x \b.%d >16 lelong x \b, Total of %d >12 lelong x \b %d-byte output blocks in >20 lelong x \b %d input chunks. + +# Android binary XML magic +# In include/androidfw/ResourceTypes.h: +# RES_XML_TYPE = 0x0003 followed by the size of the header (ResXMLTree_header), +# which is 8 bytes (2 bytes type + 2 bytes header size + 4 bytes size). +0 lelong 0x00080003 Android binary XML diff --git a/contrib/file/magic/Magdir/apple b/contrib/file/magic/Magdir/apple index e3dd059f8aaf..dcfa8788b8f1 100644 --- a/contrib/file/magic/Magdir/apple +++ b/contrib/file/magic/Magdir/apple @@ -1,302 +1,311 @@ #------------------------------------------------------------------------------ -# $File: apple,v 1.29 2014/04/30 21:41:02 christos Exp $ +# $File: apple,v 1.30 2015/04/13 13:09:06 christos Exp $ # apple: file(1) magic for Apple file formats # 0 search/1/t FiLeStArTfIlEsTaRt binscii (apple ][) text 0 string \x0aGL Binary II (apple ][) data 0 string \x76\xff Squeezed (apple ][) data 0 string NuFile NuFile archive (apple ][) data 0 string N\xf5F\xe9l\xe5 NuFile archive (apple ][) data 0 belong 0x00051600 AppleSingle encoded Macintosh file 0 belong 0x00051607 AppleDouble encoded Macintosh file # Type: Apple Emulator 2IMG format # From: Radek Vokal 0 string 2IMG Apple ][ 2IMG Disk Image >4 string XGS! \b, XGS >4 string CTKG \b, Catakig >4 string ShIm \b, Sheppy's ImageMaker >4 string WOOF \b, Sweet 16 >4 string B2TR \b, Bernie ][ the Rescue >4 string !nfc \b, ASIMOV2 >4 string x \b, Unknown Format >0xc byte 00 \b, DOS 3.3 sector order >>0x10 byte 00 \b, Volume 254 >>0x10 byte&0x7f x \b, Volume %u >0xc byte 01 \b, ProDOS sector order >>0x14 short x \b, %u Blocks >0xc byte 02 \b, NIB data # magic for Newton PDA package formats # from Ruda Moura 0 string package0 Newton package, NOS 1.x, >12 belong &0x80000000 AutoRemove, >12 belong &0x40000000 CopyProtect, >12 belong &0x10000000 NoCompression, >12 belong &0x04000000 Relocation, >12 belong &0x02000000 UseFasterCompression, >16 belong x version %d 0 string package1 Newton package, NOS 2.x, >12 belong &0x80000000 AutoRemove, >12 belong &0x40000000 CopyProtect, >12 belong &0x10000000 NoCompression, >12 belong &0x04000000 Relocation, >12 belong &0x02000000 UseFasterCompression, >16 belong x version %d 0 string package4 Newton package, >8 byte 8 NOS 1.x, >8 byte 9 NOS 2.x, >12 belong &0x80000000 AutoRemove, >12 belong &0x40000000 CopyProtect, >12 belong &0x10000000 NoCompression, # The following entries for the Apple II are for files that have # been transferred as raw binary data from an Apple, without having # been encapsulated by any of the above archivers. # # In general, Apple II formats are hard to identify because Apple DOS # and especially Apple ProDOS have strong typing in the file system and # therefore programmers never felt much need to include type information # in the files themselves. # # Eric Fischer # AppleWorks word processor: # # This matches the standard tab stops for an AppleWorks file, but if # a file has a tab stop set in the first four columns this will fail. # # The "O" is really the magic number, but that's so common that it's # necessary to check the tab stops that follow it to avoid false positives. 4 string O==== AppleWorks word processor data >85 byte&0x01 >0 \b, zoomed >90 byte&0x01 >0 \b, paginated >92 byte&0x01 >0 \b, with mail merge #>91 byte x \b, left margin %d # AppleWorks database: # # This isn't really a magic number, but it's the closest thing to one # that I could find. The 1 and 2 really mean "order in which you defined # categories" and "left to right, top to bottom," respectively; the D and R # mean that the cursor should move either down or right when you press Return. #30 string \x01D AppleWorks database data #30 string \x02D AppleWorks database data #30 string \x01R AppleWorks database data #30 string \x02R AppleWorks database data # AppleWorks spreadsheet: # # Likewise, this isn't really meant as a magic number. The R or C means # row- or column-order recalculation; the A or M means automatic or manual # recalculation. #131 string RA AppleWorks spreadsheet data #131 string RM AppleWorks spreadsheet data #131 string CA AppleWorks spreadsheet data #131 string CM AppleWorks spreadsheet data # Applesoft BASIC: # # This is incredibly sloppy, but will be true if the program was # written at its usual memory location of 2048 and its first line # number is less than 256. Yuck. # update by Joerg Jenderek at Feb 2013 # GRR: this test is still too general as it catches also Gujin BOOT144.SYS (0xfa080000) #0 belong&0xff00ff 0x80000 Applesoft BASIC program data 0 belong&0x00ff00ff 0x00080000 # assuming that line number must be positive >2 leshort >0 Applesoft BASIC program data, first line number %d #>2 leshort x \b, first line number %d # ORCA/EZ assembler: # # This will not identify ORCA/M source files, since those have # some sort of date code instead of the two zero bytes at 6 and 7 # XXX Conflicts with ELF #4 belong&0xff00ffff 0x01000000 ORCA/EZ assembler source data #>5 byte x \b, build number %d # Broderbund Fantavision # # I don't know what these values really mean, but they seem to recur. # Will they cause too many conflicts? # Probably :-) #2 belong&0xFF00FF 0x040008 Fantavision movie data # Some attempts at images. # # These are actually just bit-for-bit dumps of the frame buffer, so # there's really no reasonably way to distinguish them except for their # address (if preserved) -- 8192 or 16384 -- and their length -- 8192 # or, occasionally, 8184. # # Nevertheless this will manage to catch a lot of images that happen # to have a solid-colored line at the bottom of the screen. # GRR: Magic too weak #8144 string \x7F\x7F\x7F\x7F\x7F\x7F\x7F\x7F Apple II image with white background #8144 string \x55\x2A\x55\x2A\x55\x2A\x55\x2A Apple II image with purple background #8144 string \x2A\x55\x2A\x55\x2A\x55\x2A\x55 Apple II image with green background #8144 string \xD5\xAA\xD5\xAA\xD5\xAA\xD5\xAA Apple II image with blue background #8144 string \xAA\xD5\xAA\xD5\xAA\xD5\xAA\xD5 Apple II image with orange background # Beagle Bros. Apple Mechanic fonts 0 belong&0xFF00FFFF 0x6400D000 Apple Mechanic font # Apple Universal Disk Image Format (UDIF) - dmg files. # From Johan Gade. # These entries are disabled for now until we fix the following issues. # # Note there might be some problems with the "VAX COFF executable" # entry. Note this entry should be placed before the mac filesystem section, # particularly the "Apple Partition data" entry. # # The intended meaning of these tests is, that the file is only of the # specified type if both of the lines are correct - i.e. if the first # line matches and the second doesn't then it is not of that type. # #0 long 0x7801730d #>4 long 0x62626060 UDIF read-only zlib-compressed image (UDZO) # # Note that this entry is recognized correctly by the "Apple Partition # data" entry - however since this entry is more specific - this # information seems to be more useful. #0 long 0x45520200 #>0x410 string disk\ image UDIF read/write image (UDRW) # From: Toby Peterson 0 string bplist00 Apple binary property list # Apple binary property list (bplist) # Assumes version bytes are hex. # Provides content hints for version 0 files. Assumes that the root # object is the first object (true for CoreFoundation implementation). # From: David Remahl 0 string bplist >6 byte x \bCoreFoundation binary property list data, version 0x%c >>7 byte x \b%c >6 string 00 \b >>8 byte&0xF0 0x00 \b >>>8 byte&0x0F 0x00 \b, root type: null >>>8 byte&0x0F 0x08 \b, root type: false boolean >>>8 byte&0x0F 0x09 \b, root type: true boolean >>8 byte&0xF0 0x10 \b, root type: integer >>8 byte&0xF0 0x20 \b, root type: real >>8 byte&0xF0 0x30 \b, root type: date >>8 byte&0xF0 0x40 \b, root type: data >>8 byte&0xF0 0x50 \b, root type: ascii string >>8 byte&0xF0 0x60 \b, root type: unicode string >>8 byte&0xF0 0x80 \b, root type: uid (CORRUPT) >>8 byte&0xF0 0xa0 \b, root type: array >>8 byte&0xF0 0xd0 \b, root type: dictionary # Apple/NeXT typedstream data # Serialization format used by NeXT and Apple for various # purposes in YellowStep/Cocoa, including some nib files. # From: David Remahl 2 string typedstream NeXT/Apple typedstream data, big endian >0 byte x \b, version %d >0 byte <5 \b >>13 byte 0x81 \b >>>14 ubeshort x \b, system %d 2 string streamtyped NeXT/Apple typedstream data, little endian >0 byte x \b, version %d >0 byte <5 \b >>13 byte 0x81 \b >>>14 uleshort x \b, system %d #------------------------------------------------------------------------------ # CAF: Apple CoreAudio File Format # # Container format for high-end audio purposes. # From: David Remahl # 0 string caff CoreAudio Format audio file >4 beshort <10 version %d >6 beshort x #------------------------------------------------------------------------------ # Keychain database files 0 string kych Mac OS X Keychain File #------------------------------------------------------------------------------ # Code Signing related file types 0 belong 0xfade0c00 Mac OS X Code Requirement >8 belong 1 (opExpr) >4 belong x - %d bytes 0 belong 0xfade0c01 Mac OS X Code Requirement Set >8 belong >1 containing %d items >4 belong x - %d bytes 0 belong 0xfade0c02 Mac OS X Code Directory >8 belong x version %x >12 belong >0 flags 0x%x >4 belong x - %d bytes 0 belong 0xfade0cc0 Mac OS X Detached Code Signature (non-executable) >4 belong x - %d bytes 0 belong 0xfade0cc1 Mac OS X Detached Code Signature >8 belong >1 (%d elements) >4 belong x - %d bytes # From: "Nelson A. de Oliveira" # .vdi 4 string innotek\ VirtualBox\ Disk\ Image %s # Apple disk partition stuff, strengthen the magic using byte 4 0 beshort 0x4552 >4 byte 0 Apple Driver Map >>2 beshort x \b, blocksize %d >>4 belong x \b, blockcount %d >>10 beshort x \b, devtype %d >>12 beshort x \b, devid %d >>20 beshort x \b, descriptors %d # Assume 8 partitions each at a multiple of the sector size. # We could glean this from the partition descriptors, but they are empty!?!? >>(2.S*1) indirect \b, contains[@0x%x]: >>(2.S*2) indirect \b, contains[@0x%x]: >>(2.S*3) indirect \b, contains[@0x%x]: >>(2.S*4) indirect \b, contains[@0x%x]: >>(2.S*5) indirect \b, contains[@0x%x]: >>(2.S*6) indirect \b, contains[@0x%x]: >>(2.S*7) indirect \b, contains[@0x%x]: >>(2.S*8) indirect \b, contains[@0x%x]: # Yes, the 3rd and 4th bytes are reserved, but we use them to make the # magic stronger. 0 belong 0x504d0000 Apple Partition Map >4 belong x \b, map block count %d >8 belong x \b, start block %d >12 belong x \b, block count %d >16 string >0 \b, name %s >48 string >0 \b, type %s >124 string >0 \b, processor %s >140 string >0 \b, boot arguments %s >92 belong & 1 \b, valid >92 belong & 2 \b, allocated >92 belong & 4 \b, in use >92 belong & 8 \b, has boot info >92 belong & 16 \b, readable >92 belong & 32 \b, writable >92 belong & 64 \b, pic boot code >92 belong & 128 \b, chain compatible driver >92 belong & 256 \b, real driver >92 belong & 512 \b, chain driver >92 belong & 1024 \b, mount at startup >92 belong & 2048 \b, is the startup partition #http://wiki.mozilla.org/DS_Store_File_Format` #http://en.wikipedia.org/wiki/.DS_Store 0 string \0\0\0\1Bud1\0 Apple Desktop Services Store + +# HFS/HFS+ Resource fork files (andrew.roazen@nau.edu Apr 13 2015) +# Usually not in separate files, but have either filename rsrc with +# no extension, or a filename corresponding to another file, with +# extensions rsr/rsrc +0 string \000\000\001\000 +>4 leshort 0 +>>16 lelong 0 Apple HFS/HFS+ resource fork + diff --git a/contrib/file/magic/Magdir/archive b/contrib/file/magic/Magdir/archive index 4ef73a7d7226..30cced005625 100644 --- a/contrib/file/magic/Magdir/archive +++ b/contrib/file/magic/Magdir/archive @@ -1,956 +1,959 @@ #------------------------------------------------------------------------------ -# $File: archive,v 1.88 2014/08/16 10:42:17 christos Exp $ +# $File: archive,v 1.90 2015/04/24 15:44:12 christos Exp $ # archive: file(1) magic for archive formats (see also "msdos" for self- # extracting compressed archives) # # cpio, ar, arc, arj, hpack, lha/lharc, rar, squish, uc2, zip, zoo, etc. # pre-POSIX "tar" archives are handled in the C code. # POSIX tar archives 257 string ustar\0 POSIX tar archive !:mime application/x-tar # encoding: posix 257 string ustar\040\040\0 GNU tar archive !:mime application/x-tar # encoding: gnu # Incremental snapshot gnu-tar format from: # http://www.gnu.org/software/tar/manual/html_node/Snapshot-Files.html 0 string GNU\ tar- GNU tar incremental snapshot data >&0 regex [0-9]\.[0-9]+-[0-9]+ version %s # cpio archives # # Yes, the top two "cpio archive" formats *are* supposed to just be "short". # The idea is to indicate archives produced on machines with the same # byte order as the machine running "file" with "cpio archive", and # to indicate archives produced on machines with the opposite byte order # from the machine running "file" with "byte-swapped cpio archive". # # The SVR4 "cpio(4)" hints that there are additional formats, but they # are defined as "short"s; I think all the new formats are # character-header formats and thus are strings, not numbers. 0 short 070707 cpio archive !:mime application/x-cpio 0 short 0143561 byte-swapped cpio archive !:mime application/x-cpio # encoding: swapped 0 string 070707 ASCII cpio archive (pre-SVR4 or odc) 0 string 070701 ASCII cpio archive (SVR4 with no CRC) 0 string 070702 ASCII cpio archive (SVR4 with CRC) # # Various archive formats used by various versions of the "ar" # command. # # # Original UNIX archive formats. # They were written with binary values in host byte order, and # the magic number was a host "int", which might have been 16 bits # or 32 bits. We don't say "PDP-11" or "VAX", as there might have # been ports to little-endian 16-bit-int or 32-bit-int platforms # (x86?) using some of those formats; if none existed, feel free # to use "PDP-11" for little-endian 16-bit and "VAX" for little-endian # 32-bit. There might have been big-endian ports of that sort as # well. # 0 leshort 0177555 very old 16-bit-int little-endian archive 0 beshort 0177555 very old 16-bit-int big-endian archive 0 lelong 0177555 very old 32-bit-int little-endian archive 0 belong 0177555 very old 32-bit-int big-endian archive 0 leshort 0177545 old 16-bit-int little-endian archive >2 string __.SYMDEF random library 0 beshort 0177545 old 16-bit-int big-endian archive >2 string __.SYMDEF random library 0 lelong 0177545 old 32-bit-int little-endian archive >4 string __.SYMDEF random library 0 belong 0177545 old 32-bit-int big-endian archive >4 string __.SYMDEF random library # # From "pdp" (but why a 4-byte quantity?) # 0 lelong 0x39bed PDP-11 old archive 0 lelong 0x39bee PDP-11 4.0 archive # # XXX - what flavor of APL used this, and was it a variant of # some ar archive format? It's similar to, but not the same # as, the APL workspace magic numbers in pdp. # 0 long 0100554 apl workspace # # System V Release 1 portable(?) archive format. # 0 string = System V Release 1 ar archive !:mime application/x-archive # # Debian package; it's in the portable archive format, and needs to go # before the entry for regular portable archives, as it's recognized as # a portable archive whose first member has a name beginning with # "debian". # 0 string =!\ndebian >8 string debian-split part of multipart Debian package !:mime application/vnd.debian.binary-package >8 string debian-binary Debian binary package !:mime application/vnd.debian.binary-package >8 string !debian >68 string >\0 (format %s) # These next two lines do not work, because a bzip2 Debian archive # still uses gzip for the control.tar (first in the archive). Only # data.tar varies, and the location of its filename varies too. # file/libmagic does not current have support for ascii-string based # (offsets) as of 2005-09-15. #>81 string bz2 \b, uses bzip2 compression #>84 string gz \b, uses gzip compression #>136 ledate x created: %s # # MIPS archive; they're in the portable archive format, and need to go # before the entry for regular portable archives, as it's recognized as # a portable archive whose first member has a name beginning with # "__________E". # 0 string =!\n__________E MIPS archive !:mime application/x-archive >20 string U with MIPS Ucode members >21 string L with MIPSEL members >21 string B with MIPSEB members >19 string L and an EL hash table >19 string B and an EB hash table >22 string X -- out of date 0 search/1 -h- Software Tools format archive text # # BSD/SVR2-and-later portable archive formats. # 0 string =! current ar archive !:mime application/x-archive >8 string __.SYMDEF random library >68 string __.SYMDEF\ SORTED random library # # "Thin" archive, as can be produced by GNU ar. # 0 string =!\n thin archive with >68 belong 0 no symbol entries >68 belong 1 %d symbol entry >68 belong >1 %d symbol entries # ARC archiver, from Daniel Quinlan (quinlan@yggdrasil.com) # # The first byte is the magic (0x1a), byte 2 is the compression type for # the first file (0x01 through 0x09), and bytes 3 to 15 are the MS-DOS # filename of the first file (null terminated). Since some types collide # we only test some types on basis of frequency: 0x08 (83%), 0x09 (5%), # 0x02 (5%), 0x03 (3%), 0x04 (2%), 0x06 (2%). 0x01 collides with terminfo. 0 lelong&0x8080ffff 0x0000081a ARC archive data, dynamic LZW !:mime application/x-arc 0 lelong&0x8080ffff 0x0000091a ARC archive data, squashed !:mime application/x-arc 0 lelong&0x8080ffff 0x0000021a ARC archive data, uncompressed !:mime application/x-arc 0 lelong&0x8080ffff 0x0000031a ARC archive data, packed !:mime application/x-arc 0 lelong&0x8080ffff 0x0000041a ARC archive data, squeezed !:mime application/x-arc 0 lelong&0x8080ffff 0x0000061a ARC archive data, crunched !:mime application/x-arc # [JW] stuff taken from idarc, obviously ARC successors: 0 lelong&0x8080ffff 0x00000a1a PAK archive data !:mime application/x-arc 0 lelong&0x8080ffff 0x0000141a ARC+ archive data !:mime application/x-arc 0 lelong&0x8080ffff 0x0000481a HYP archive data !:mime application/x-arc # Acorn archive formats (Disaster prone simpleton, m91dps@ecs.ox.ac.uk) # I can't create either SPARK or ArcFS archives so I have not tested this stuff # [GRR: the original entries collide with ARC, above; replaced with combined # version (not tested)] #0 byte 0x1a RISC OS archive (spark format) 0 string \032archive RISC OS archive (ArcFS format) 0 string Archive\000 RISC OS archive (ArcFS format) # All these were taken from idarc, many could not be verified. Unfortunately, # there were many low-quality sigs, i.e. easy to trigger false positives. # Please notify me of any real-world fishy/ambiguous signatures and I'll try # to get my hands on the actual archiver and see if I find something better. [JW] # probably many can be enhanced by finding some 0-byte or control char near the start # idarc calls this Crush/Uncompressed... *shrug* 0 string CRUSH Crush archive data # Squeeze It (.sqz) 0 string HLSQZ Squeeze It archive data # SQWEZ 0 string SQWEZ SQWEZ archive data # HPack (.hpk) 0 string HPAK HPack archive data # HAP 0 string \x91\x33HF HAP archive data # MD/MDCD 0 string MDmd MDCD archive data # LIM 0 string LIM\x1a LIM archive data # SAR 3 string LH5 SAR archive data # BSArc/BS2 0 string \212\3SB\020\0 BSArc/BS2 archive data # Bethesda Softworks Archive (Oblivion) 0 string BSA\0 BSArc archive data >4 lelong x version %d # MAR 2 string =-ah MAR archive data # ACB #0 belong&0x00f800ff 0x00800000 ACB archive data # CPZ # TODO, this is what idarc says: 0 string \0\0\0 CPZ archive data # JRC 0 string JRchive JRC archive data # Quantum 0 string DS\0 Quantum archive data # ReSOF 0 string PK\3\6 ReSOF archive data # QuArk 0 string 7\4 QuArk archive data # YAC 14 string YC YAC archive data # X1 0 string X1 X1 archive data 0 string XhDr X1 archive data # CDC Codec (.dqt) 0 belong&0xffffe000 0x76ff2000 CDC Codec archive data # AMGC 0 string \xad6" AMGC archive data # NuLIB 0 string N\xc3\xb5F\xc3\xa9lx\xc3\xa5 NuLIB archive data # PakLeo 0 string LEOLZW PAKLeo archive data # ChArc 0 string SChF ChArc archive data # PSA 0 string PSA PSA archive data # CrossePAC 0 string DSIGDCC CrossePAC archive data # Freeze 0 string \x1f\x9f\x4a\x10\x0a Freeze archive data # KBoom 0 string \xc2\xa8MP\xc2\xa8 KBoom archive data # NSQ, must go after CDC Codec 0 string \x76\xff NSQ archive data # DPA 0 string Dirk\ Paehl DPA archive data # BA # TODO: idarc says "bytes 0-2 == bytes 3-5" # TTComp 0 string \0\6 TTComp archive data # ESP, could this conflict with Easy Software Products' (e.g.ESP ghostscript) documentation? 0 string ESP ESP archive data # ZPack 0 string \1ZPK\1 ZPack archive data # Sky 0 string \xbc\x40 Sky archive data # UFA 0 string UFA UFA archive data # Dry 0 string =-H2O DRY archive data # FoxSQZ 0 string FOXSQZ FoxSQZ archive data # AR7 0 string ,AR7 AR7 archive data # PPMZ 0 string PPMZ PPMZ archive data # MS Compress 4 string \x88\xf0\x27 MS Compress archive data # updated by Joerg Jenderek >9 string \0 >>0 string KWAJ >>>7 string \321\003 MS Compress archive data >>>>14 ulong >0 \b, original size: %d bytes >>>>18 ubyte >0x65 >>>>>18 string x \b, was %.8s >>>>>(10.b-4) string x \b.%.3s # MP3 (archiver, not lossy audio compression) 0 string MP3\x1a MP3-Archiver archive data # ZET 0 string OZ\xc3\x9d ZET archive data # TSComp 0 string \x65\x5d\x13\x8c\x08\x01\x03\x00 TSComp archive data # ARQ 0 string gW\4\1 ARQ archive data # Squash 3 string OctSqu Squash archive data # Terse 0 string \5\1\1\0 Terse archive data # PUCrunch 0 string \x01\x08\x0b\x08\xef\x00\x9e\x32\x30\x36\x31 PUCrunch archive data # UHarc 0 string UHA UHarc archive data # ABComp 0 string \2AB ABComp archive data 0 string \3AB2 ABComp archive data # CMP 0 string CO\0 CMP archive data # Splint 0 string \x93\xb9\x06 Splint archive data # InstallShield 0 string \x13\x5d\x65\x8c InstallShield Z archive Data # Gather 1 string GTH Gather archive data # BOA 0 string BOA BOA archive data # RAX 0 string ULEB\xa RAX archive data # Xtreme 0 string ULEB\0 Xtreme archive data # Pack Magic 0 string @\xc3\xa2\1\0 Pack Magic archive data # BTS 0 belong&0xfeffffff 0x1a034465 BTS archive data # ELI 5750 0 string Ora\ ELI 5750 archive data # QFC 0 string \x1aFC\x1a QFC archive data 0 string \x1aQF\x1a QFC archive data # PRO-PACK 0 string RNC PRO-PACK archive data # 777 0 string 777 777 archive data # LZS221 0 string sTaC LZS221 archive data # HPA 0 string HPA HPA archive data # Arhangel 0 string LG Arhangel archive data # EXP1, uses bzip2 0 string 0123456789012345BZh EXP1 archive data # IMP 0 string IMP\xa IMP archive data # NRV 0 string \x00\x9E\x6E\x72\x76\xFF NRV archive data # Squish 0 string \x73\xb2\x90\xf4 Squish archive data # Par 0 string PHILIPP Par archive data 0 string PAR Par archive data # HIT 0 string UB HIT archive data # SBX 0 belong&0xfffff000 0x53423000 SBX archive data # NaShrink 0 string NSK NaShrink archive data # SAPCAR 0 string #\ CAR\ archive\ header SAPCAR archive data 0 string CAR\ 2.00RG SAPCAR archive data # Disintegrator 0 string DST Disintegrator archive data # ASD 0 string ASD ASD archive data # InstallShield CAB 0 string ISc( InstallShield CAB # TOP4 0 string T4\x1a TOP4 archive data # BatComp left out: sig looks like COM executable # so TODO: get real 4dos batcomp file and find sig # BlakHole 0 string BH\5\7 BlakHole archive data # BIX 0 string BIX0 BIX archive data # ChiefLZA 0 string ChfLZ ChiefLZA archive data # Blink 0 string Blink Blink archive data # Logitech Compress 0 string \xda\xfa Logitech Compress archive data # ARS-Sfx (FIXME: really a SFX? then goto COM/EXE) 1 string (C)\ STEPANYUK ARS-Sfx archive data # AKT/AKT32 0 string AKT32 AKT32 archive data 0 string AKT AKT archive data # NPack 0 string MSTSM NPack archive data # PFT 0 string \0\x50\0\x14 PFT archive data # SemOne 0 string SEM SemOne archive data # PPMD 0 string \x8f\xaf\xac\x84 PPMD archive data # FIZ 0 string FIZ FIZ archive data # MSXiE 0 belong&0xfffff0f0 0x4d530000 MSXiE archive data # DeepFreezer 0 belong&0xfffffff0 0x797a3030 DeepFreezer archive data # DC 0 string =2 byte x \b, version %i >3 byte x \b.%i # ZZip archiver (.zz) 0 string ZZ\ \0\0 ZZip archive data 0 string ZZ0 ZZip archive data # PAQ archiver (.paq) 0 string \xaa\x40\x5f\x77\x1f\xe5\x82\x0d PAQ archive data 0 string PAQ PAQ archive data >3 byte&0xf0 0x30 >>3 byte x (v%c) # JAR archiver (.j), this is the successor to ARJ, not Java's JAR (which is essentially ZIP) 0xe string \x1aJar\x1b JAR (ARJ Software, Inc.) archive data 0 string JARCS JAR (ARJ Software, Inc.) archive data # ARJ archiver (jason@jarthur.Claremont.EDU) 0 leshort 0xea60 ARJ archive data !:mime application/x-arj >5 byte x \b, v%d, >8 byte &0x04 multi-volume, >8 byte &0x10 slash-switched, >8 byte &0x20 backup, >34 string x original name: %s, >7 byte 0 os: MS-DOS >7 byte 1 os: PRIMOS >7 byte 2 os: Unix >7 byte 3 os: Amiga >7 byte 4 os: Macintosh >7 byte 5 os: OS/2 >7 byte 6 os: Apple ][ GS >7 byte 7 os: Atari ST >7 byte 8 os: NeXT >7 byte 9 os: VAX/VMS >3 byte >0 %d] # [JW] idarc says this is also possible 2 leshort 0xea60 ARJ archive data # HA archiver (Greg Roelofs, newt@uchicago.edu) # This is a really bad format. A file containing HAWAII will match this... #0 string HA HA archive data, #>2 leshort =1 1 file, #>2 leshort >1 %hu files, #>4 byte&0x0f =0 first is type CPY #>4 byte&0x0f =1 first is type ASC #>4 byte&0x0f =2 first is type HSC #>4 byte&0x0f =0x0e first is type DIR #>4 byte&0x0f =0x0f first is type SPECIAL # suggestion: at least identify small archives (<1024 files) 0 belong&0xffff00fc 0x48410000 HA archive data >2 leshort =1 1 file, >2 leshort >1 %u files, >4 byte&0x0f =0 first is type CPY >4 byte&0x0f =1 first is type ASC >4 byte&0x0f =2 first is type HSC >4 byte&0x0f =0x0e first is type DIR >4 byte&0x0f =0x0f first is type SPECIAL # HPACK archiver (Peter Gutmann, pgut1@cs.aukuni.ac.nz) 0 string HPAK HPACK archive data # JAM Archive volume format, by Dmitry.Kohmanyuk@UA.net 0 string \351,\001JAM\ JAM archive, >7 string >\0 version %.4s >0x26 byte =0x27 - >>0x2b string >\0 label %.11s, >>0x27 lelong x serial %08x, >>0x36 string >\0 fstype %.8s # LHARC/LHA archiver (Greg Roelofs, newt@uchicago.edu) 2 string -lh0- LHarc 1.x/ARX archive data [lh0] !:mime application/x-lharc 2 string -lh1- LHarc 1.x/ARX archive data [lh1] !:mime application/x-lharc 2 string -lz4- LHarc 1.x archive data [lz4] !:mime application/x-lharc 2 string -lz5- LHarc 1.x archive data [lz5] !:mime application/x-lharc # [never seen any but the last; -lh4- reported in comp.compression:] 2 string -lzs- LHa/LZS archive data [lzs] !:mime application/x-lha 2 string -lh\40- LHa 2.x? archive data [lh ] !:mime application/x-lha 2 string -lhd- LHa 2.x? archive data [lhd] !:mime application/x-lha 2 string -lh2- LHa 2.x? archive data [lh2] !:mime application/x-lha 2 string -lh3- LHa 2.x? archive data [lh3] !:mime application/x-lha 2 string -lh4- LHa (2.x) archive data [lh4] !:mime application/x-lha 2 string -lh5- LHa (2.x) archive data [lh5] !:mime application/x-lha 2 string -lh6- LHa (2.x) archive data [lh6] !:mime application/x-lha 2 string -lh7- LHa (2.x)/LHark archive data [lh7] !:mime application/x-lha >20 byte x - header level %d # taken from idarc [JW] 2 string -lZ PUT archive data 2 string -lz LZS archive data 2 string -sw1- Swag archive data # RAR archiver (Greg Roelofs, newt@uchicago.edu) 0 string Rar! RAR archive data, !:mime application/x-rar >44 byte x v%0x, >10 byte >0 flags: >>10 byte &0x01 Archive volume, >>10 byte &0x02 Commented, >>10 byte &0x04 Locked, >>10 byte &0x08 Solid, >>10 byte &0x20 Authenticated, >35 byte 0 os: MS-DOS >35 byte 1 os: OS/2 >35 byte 2 os: Win32 >35 byte 3 os: Unix # some old version? idarc says: 0 string RE\x7e\x5e RAR archive data # SQUISH archiver (Greg Roelofs, newt@uchicago.edu) 0 string SQSH squished archive data (Acorn RISCOS) # UC2 archiver (Greg Roelofs, newt@uchicago.edu) # [JW] see exe section for self-extracting version 0 string UC2\x1a UC2 archive data # PKZIP multi-volume archive 0 string PK\x07\x08PK\x03\x04 Zip multi-volume archive data, at least PKZIP v2.50 to extract !:mime application/zip # Zip archives (Greg Roelofs, c/o zip-bugs@wkuvx1.wku.edu) 0 string PK\005\006 Zip archive data (empty) 0 string PK\003\004 # Specialised zip formats which start with a member named 'mimetype' # (stored uncompressed, with no 'extra field') containing the file's MIME type. # Check for have 8-byte name, 0-byte extra field, name "mimetype", and # contents starting with "application/": >26 string \x8\0\0\0mimetypeapplication/ # KOffice / OpenOffice & StarOffice / OpenDocument formats # From: Abel Cheung # KOffice (1.2 or above) formats # (mimetype contains "application/vnd.kde.") >>50 string vnd.kde. KOffice (>=1.2) >>>58 string karbon Karbon document >>>58 string kchart KChart document >>>58 string kformula KFormula document >>>58 string kivio Kivio document >>>58 string kontour Kontour document >>>58 string kpresenter KPresenter document >>>58 string kspread KSpread document >>>58 string kword KWord document # OpenOffice formats (for OpenOffice 1.x / StarOffice 6/7) # (mimetype contains "application/vnd.sun.xml.") >>50 string vnd.sun.xml. OpenOffice.org 1.x >>>62 string writer Writer >>>>68 byte !0x2e document >>>>68 string .template template >>>>68 string .global global document >>>62 string calc Calc >>>>66 byte !0x2e spreadsheet >>>>66 string .template template >>>62 string draw Draw >>>>66 byte !0x2e document >>>>66 string .template template >>>62 string impress Impress >>>>69 byte !0x2e presentation >>>>69 string .template template >>>62 string math Math document >>>62 string base Database file # OpenDocument formats (for OpenOffice 2.x / StarOffice >= 8) # http://lists.oasis-open.org/archives/office/200505/msg00006.html # (mimetype contains "application/vnd.oasis.opendocument.") >>50 string vnd.oasis.opendocument. OpenDocument >>>73 string text >>>>77 byte !0x2d Text !:mime application/vnd.oasis.opendocument.text >>>>77 string -template Text Template !:mime application/vnd.oasis.opendocument.text-template >>>>77 string -web HTML Document Template !:mime application/vnd.oasis.opendocument.text-web >>>>77 string -master Master Document !:mime application/vnd.oasis.opendocument.text-master >>>73 string graphics >>>>81 byte !0x2d Drawing !:mime application/vnd.oasis.opendocument.graphics >>>>81 string -template Template !:mime application/vnd.oasis.opendocument.graphics-template >>>73 string presentation >>>>85 byte !0x2d Presentation !:mime application/vnd.oasis.opendocument.presentation >>>>85 string -template Template !:mime application/vnd.oasis.opendocument.presentation-template >>>73 string spreadsheet >>>>84 byte !0x2d Spreadsheet !:mime application/vnd.oasis.opendocument.spreadsheet >>>>84 string -template Template !:mime application/vnd.oasis.opendocument.spreadsheet-template >>>73 string chart >>>>78 byte !0x2d Chart !:mime application/vnd.oasis.opendocument.chart >>>>78 string -template Template !:mime application/vnd.oasis.opendocument.chart-template >>>73 string formula >>>>80 byte !0x2d Formula !:mime application/vnd.oasis.opendocument.formula >>>>80 string -template Template !:mime application/vnd.oasis.opendocument.formula-template >>>73 string database Database !:mime application/vnd.oasis.opendocument.database >>>73 string image >>>>78 byte !0x2d Image !:mime application/vnd.oasis.opendocument.image >>>>78 string -template Template !:mime application/vnd.oasis.opendocument.image-template # EPUB (OEBPS) books using OCF (OEBPS Container Format) # http://www.idpf.org/ocf/ocf1.0/download/ocf10.htm, section 4. # From: Ralf Brown >>50 string epub+zip EPUB document !:mime application/epub+zip # Catch other ZIP-with-mimetype formats # In a ZIP file, the bytes immediately after a member's contents are # always "PK". The 2 regex rules here print the "mimetype" member's # contents up to the first 'P'. Luckily, most MIME types don't contain # any capital 'P's. This is a kludge. # (mimetype contains "application/") >>50 string !epub+zip >>>50 string !vnd.oasis.opendocument. >>>>50 string !vnd.sun.xml. >>>>>50 string !vnd.kde. >>>>>>38 regex [!-OQ-~]+ Zip data (MIME type "%s"?) !:mime application/zip # (mimetype contents other than "application/*") >26 string \x8\0\0\0mimetype >>38 string !application/ >>>38 regex [!-OQ-~]+ Zip data (MIME type "%s"?) !:mime application/zip # Java Jar files >(26.s+30) leshort 0xcafe Java archive data (JAR) !:mime application/java-archive # Generic zip archives (Greg Roelofs, c/o zip-bugs@wkuvx1.wku.edu) # Next line excludes specialized formats: >(26.s+30) leshort !0xcafe >>26 string !\x8\0\0\0mimetype Zip archive data !:mime application/zip >>>4 byte 0x09 \b, at least v0.9 to extract >>>4 byte 0x0a \b, at least v1.0 to extract >>>4 byte 0x0b \b, at least v1.1 to extract >>>4 byte 0x14 \b, at least v2.0 to extract ->>>4 byte 0x2d \b, at least v3.0 to extract +>>>4 byte 0x2d \b, at least v4.5 to extract >>>0x161 string WINZIP \b, WinZIP self-extracting # StarView Metafile # From Pierre Ducroquet 0 string VCLMTF StarView MetaFile >6 beshort x \b, version %d >8 belong x \b, size %d # Zoo archiver 20 lelong 0xfdc4a7dc Zoo archive data !:mime application/x-zoo >4 byte >48 \b, v%c. >>6 byte >47 \b%c >>>7 byte >47 \b%c >32 byte >0 \b, modify: v%d >>33 byte x \b.%d+ >42 lelong 0xfdc4a7dc \b, >>70 byte >0 extract: v%d >>>71 byte x \b.%d+ # Shell archives 10 string #\ This\ is\ a\ shell\ archive shell archive text !:mime application/octet-stream # # LBR. NB: May conflict with the questionable # "binary Computer Graphics Metafile" format. # 0 string \0\ \ \ \ \ \ \ \ \ \ \ \0\0 LBR archive data # # PMA (CP/M derivative of LHA) # 2 string -pm0- PMarc archive data [pm0] 2 string -pm1- PMarc archive data [pm1] 2 string -pm2- PMarc archive data [pm2] 2 string -pms- PMarc SFX archive (CP/M, DOS) 5 string -pc1- PopCom compressed executable (CP/M) # From Rafael Laboissiere # The Project Revision Control System (see # http://prcs.sourceforge.net) generates a packaged project # file which is recognized by the following entry: 0 leshort 0xeb81 PRCS packaged project # Microsoft cabinets # by David Necas (Yeti) #0 string MSCF\0\0\0\0 Microsoft cabinet file data, #>25 byte x v%d #>24 byte x \b.%d # MPi: All CABs have version 1.3, so this is pointless. # Better magic in debian-additions. # GTKtalog catalogs # by David Necas (Yeti) 4 string gtktalog\ GTKtalog catalog data, >13 string 3 version 3 >>14 beshort 0x677a (gzipped) >>14 beshort !0x677a (not gzipped) >13 string >3 version %s ############################################################################ # Parity archive reconstruction file, the 'par' file format now used on Usenet. 0 string PAR\0 PARity archive data >48 leshort =0 - Index file >48 leshort >0 - file number %d # Felix von Leitner 0 string d8:announce BitTorrent file !:mime application/x-bittorrent # Atari MSA archive - Teemu Hukkanen 0 beshort 0x0e0f Atari MSA archive data >2 beshort x \b, %d sectors per track >4 beshort 0 \b, 1 sided >4 beshort 1 \b, 2 sided >6 beshort x \b, starting track: %d >8 beshort x \b, ending track: %d # Alternate ZIP string (amc@arwen.cs.berkeley.edu) 0 string PK00PK\003\004 Zip archive data # ACE archive (from http://www.wotsit.org/download.asp?f=ace) # by Stefan `Sec` Zehl 7 string **ACE** ACE archive data >15 byte >0 version %d >16 byte =0x00 \b, from MS-DOS >16 byte =0x01 \b, from OS/2 >16 byte =0x02 \b, from Win/32 >16 byte =0x03 \b, from Unix >16 byte =0x04 \b, from MacOS >16 byte =0x05 \b, from WinNT >16 byte =0x06 \b, from Primos >16 byte =0x07 \b, from AppleGS >16 byte =0x08 \b, from Atari >16 byte =0x09 \b, from Vax/VMS >16 byte =0x0A \b, from Amiga >16 byte =0x0B \b, from Next >14 byte x \b, version %d to extract >5 leshort &0x0080 \b, multiple volumes, >>17 byte x \b (part %d), >5 leshort &0x0002 \b, contains comment >5 leshort &0x0200 \b, sfx >5 leshort &0x0400 \b, small dictionary >5 leshort &0x0800 \b, multi-volume >5 leshort &0x1000 \b, contains AV-String >>30 string \x16*UNREGISTERED\x20VERSION* (unregistered) >5 leshort &0x2000 \b, with recovery record >5 leshort &0x4000 \b, locked >5 leshort &0x8000 \b, solid # Date in MS-DOS format (whatever that is) #>18 lelong x Created on # sfArk : compression program for Soundfonts (sf2) by Dirk Jagdmann # 0x1A string sfArk sfArk compressed Soundfont >0x15 string 2 >>0x1 string >\0 Version %s >>0x2A string >\0 : %s # DR-DOS 7.03 Packed File *.??_ 0 string Packed\ File\ Personal NetWare Packed File >12 string x \b, was "%.12s" # EET archive # From: Tilman Sauerbeck 0 belong 0x1ee7ff00 EET archive !:mime application/x-eet # rzip archives 0 string RZIP rzip compressed data >4 byte x - version %d >5 byte x \b.%d >6 belong x (%d bytes) # From: "Robert Dale" 0 belong 123 dar archive, >4 belong x label "%.8x >>8 belong x %.8x >>>12 beshort x %.4x" >14 byte 0x54 end slice >14 beshort 0x4e4e multi-part >14 beshort 0x4e53 multi-part, with -S # Symbian installation files # http://www.thouky.co.uk/software/psifs/sis.html # http://developer.symbian.com/main/downloads/papers/SymbianOSv91/softwareinstallsis.pdf 8 lelong 0x10000419 Symbian installation file !:mime application/vnd.symbian.install >4 lelong 0x1000006D (EPOC release 3/4/5) >4 lelong 0x10003A12 (EPOC release 6) 0 lelong 0x10201A7A Symbian installation file (Symbian OS 9.x) !:mime x-epoc/x-sisx-app # From "Nelson A. de Oliveira" 0 string MPQ\032 MoPaQ (MPQ) archive # From: Dirk Jagdmann # xar archive format: http://code.google.com/p/xar/ 0 string xar! xar archive >6 beshort x - version %d # From: "Nelson A. de Oliveira" # .kgb 0 string KGB_arch KGB Archiver file >10 string x with compression level %.1s # xar (eXtensible ARchiver) archive # From: "David Remahl" 0 string xar! xar archive #>4 beshort x header size %d >6 beshort x version %d, #>8 quad x compressed TOC: %d, #>16 quad x uncompressed TOC: %d, >24 belong 0 no checksum >24 belong 1 SHA-1 checksum >24 belong 2 MD5 checksum # Type: Parity Archive # From: Daniel van Eeden 0 string PAR2 Parity Archive Volume Set # Bacula volume format. (Volumes always start with a block header.) # URL: http://bacula.org/3.0.x-manuals/en/developers/developers/Block_Header.html # From: Adam Buchbinder 12 string BB02 Bacula volume >20 bedate x \b, started %s # ePub is XHTML + XML inside a ZIP archive. The first member of the # archive must be an uncompressed file called 'mimetype' with contents # 'application/epub+zip' # From: "Michael Gorny" # ZPAQ: http://mattmahoney.net/dc/zpaq.html 0 string zPQ ZPAQ stream >3 byte x \b, level %d +# From: Barry Carter +# http://encode.ru/threads/456-zpaq-updates/page32 +0 string 7kSt ZPAQ file # BBeB ebook, unencrypted (LRF format) # URL: http://www.sven.de/librie/Librie/LrfFormat # From: Adam Buchbinder 0 string L\0R\0F\0\0\0 BBeB ebook data, unencrypted >8 beshort x \b, version %d >36 byte 1 \b, front-to-back >36 byte 16 \b, back-to-front >42 beshort x \b, (%dx, >44 beshort x %d) # Symantec GHOST image by Joerg Jenderek at May 2014 # http://us.norton.com/ghost/ # http://www.garykessler.net/library/file_sigs.html 0 ubelong&0xFFFFf7f0 0xFEEF0100 Norton GHost image # *.GHO >2 ubyte&0x08 0x00 \b, first file # *.GHS or *.[0-9] with cns program option >2 ubyte&0x08 0x08 \b, split file # part of split index interesting for *.ghs >>4 ubyte x id=0x%x # compression tag minus one equals numeric compression command line switch z[1-9] >3 ubyte 0 \b, no compression >3 ubyte 2 \b, fast compression (Z1) >3 ubyte 3 \b, medium compression (Z2) >3 ubyte >3 >>3 ubyte <11 \b, compression (Z%d-1) >2 ubyte&0x08 0x00 # ~ 30 byte password field only for *.gho >>12 ubequad !0 \b, password protected >>44 ubyte !1 # 1~Image All, sector-by-sector only for *.gho >>>10 ubyte 1 \b, sector copy # 1~Image Boot track only for *.gho >>>43 ubyte 1 \b, boot track # 1~Image Disc only for *.gho implies Image Boot track and sector copy >>44 ubyte 1 \b, disc sector copy # optional image description only *.gho >>0xff string >\0 "%-.254s" # look for DOS sector end sequence >0xE08 search/7776 \x55\xAA >>&-512 indirect x \b; contains diff --git a/contrib/file/magic/Magdir/audio b/contrib/file/magic/Magdir/audio index 338d8aebda63..e1d52c207581 100644 --- a/contrib/file/magic/Magdir/audio +++ b/contrib/file/magic/Magdir/audio @@ -1,702 +1,717 @@ #------------------------------------------------------------------------------ -# $File: audio,v 1.71 2014/05/14 23:30:28 christos Exp $ +# $File: audio,v 1.73 2015/03/15 23:21:42 christos Exp $ # audio: file(1) magic for sound formats (see also "iff") # # Jan Nicolai Langfeldt (janl@ifi.uio.no), Dan Quinlan (quinlan@yggdrasil.com), # and others # # Sun/NeXT audio data 0 string .snd Sun/NeXT audio data: >12 belong 1 8-bit ISDN mu-law, !:mime audio/basic >12 belong 2 8-bit linear PCM [REF-PCM], !:mime audio/basic >12 belong 3 16-bit linear PCM, !:mime audio/basic >12 belong 4 24-bit linear PCM, !:mime audio/basic >12 belong 5 32-bit linear PCM, !:mime audio/basic >12 belong 6 32-bit IEEE floating point, !:mime audio/basic >12 belong 7 64-bit IEEE floating point, !:mime audio/basic >12 belong 8 Fragmented sample data, >12 belong 10 DSP program, >12 belong 11 8-bit fixed point, >12 belong 12 16-bit fixed point, >12 belong 13 24-bit fixed point, >12 belong 14 32-bit fixed point, >12 belong 18 16-bit linear with emphasis, >12 belong 19 16-bit linear compressed, >12 belong 20 16-bit linear with emphasis and compression, >12 belong 21 Music kit DSP commands, >12 belong 23 8-bit ISDN mu-law compressed (CCITT G.721 ADPCM voice enc.), !:mime audio/x-adpcm >12 belong 24 compressed (8-bit CCITT G.722 ADPCM) >12 belong 25 compressed (3-bit CCITT G.723.3 ADPCM), >12 belong 26 compressed (5-bit CCITT G.723.5 ADPCM), >12 belong 27 8-bit A-law (CCITT G.711), >20 belong 1 mono, >20 belong 2 stereo, >20 belong 4 quad, >16 belong >0 %d Hz # DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format # that uses little-endian encoding and has a different magic number 0 lelong 0x0064732E DEC audio data: >12 lelong 1 8-bit ISDN mu-law, !:mime audio/x-dec-basic >12 lelong 2 8-bit linear PCM [REF-PCM], !:mime audio/x-dec-basic >12 lelong 3 16-bit linear PCM, !:mime audio/x-dec-basic >12 lelong 4 24-bit linear PCM, !:mime audio/x-dec-basic >12 lelong 5 32-bit linear PCM, !:mime audio/x-dec-basic >12 lelong 6 32-bit IEEE floating point, !:mime audio/x-dec-basic >12 lelong 7 64-bit IEEE floating point, !:mime audio/x-dec-basic >12 belong 8 Fragmented sample data, >12 belong 10 DSP program, >12 belong 11 8-bit fixed point, >12 belong 12 16-bit fixed point, >12 belong 13 24-bit fixed point, >12 belong 14 32-bit fixed point, >12 belong 18 16-bit linear with emphasis, >12 belong 19 16-bit linear compressed, >12 belong 20 16-bit linear with emphasis and compression, >12 belong 21 Music kit DSP commands, >12 lelong 23 8-bit ISDN mu-law compressed (CCITT G.721 ADPCM voice enc.), !:mime audio/x-dec-basic >12 belong 24 compressed (8-bit CCITT G.722 ADPCM) >12 belong 25 compressed (3-bit CCITT G.723.3 ADPCM), >12 belong 26 compressed (5-bit CCITT G.723.5 ADPCM), >12 belong 27 8-bit A-law (CCITT G.711), >20 lelong 1 mono, >20 lelong 2 stereo, >20 lelong 4 quad, >16 lelong >0 %d Hz # Creative Labs AUDIO stuff 0 string MThd Standard MIDI data !:mime audio/midi >8 beshort x (format %d) >10 beshort x using %d track >10 beshort >1 \bs >12 beshort&0x7fff x at 1/%d >12 beshort&0x8000 >0 SMPTE 0 string CTMF Creative Music (CMF) data !:mime audio/x-unknown 0 string SBI SoundBlaster instrument data !:mime audio/x-unknown 0 string Creative\ Voice\ File Creative Labs voice data !:mime audio/x-unknown # is this next line right? it came this way... >19 byte 0x1A >23 byte >0 - version %d >22 byte >0 \b.%d # first entry is also the string "NTRK" 0 belong 0x4e54524b MultiTrack sound data >4 belong x - version %d # Extended MOD format (*.emd) (Greg Roelofs, newt@uchicago.edu); NOT TESTED # [based on posting 940824 by "Dirk/Elastik", husberg@lehtori.cc.tut.fi] 0 string EMOD Extended MOD sound data, >4 byte&0xf0 x version %d >4 byte&0x0f x \b.%d, >45 byte x %d instruments >83 byte 0 (module) >83 byte 1 (song) # Real Audio (Magic .ra\0375) 0 belong 0x2e7261fd RealAudio sound file !:mime audio/x-pn-realaudio 0 string .RMF\0\0\0 RealMedia file !:mime application/vnd.rn-realmedia #video/x-pn-realvideo #video/vnd.rn-realvideo #application/vnd.rn-realmedia # sigh, there are many mimes for that but the above are the most common. # MTM/669/FAR/S3M/ULT/XM format checking [Aaron Eppert, aeppert@dialin.ind.net] # Oct 31, 1995 # fixed by 2003-06-24 # Too short... #0 string MTM MultiTracker Module sound file #0 string if Composer 669 Module sound data #0 string JN Composer 669 Module sound data (extended format) 0 string MAS_U ULT(imate) Module sound data #0 string FAR Module sound data #>4 string >\15 Title: "%s" 0x2c string SCRM ScreamTracker III Module sound data >0 string >\0 Title: "%s" # Gravis UltraSound patches # From 0 string GF1PATCH110\0ID#000002\0 GUS patch 0 string GF1PATCH100\0ID#000002\0 Old GUS patch # mime types according to http://www.geocities.com/nevilo/mod.htm: # audio/it .it # audio/x-zipped-it .itz # audio/xm fasttracker modules # audio/x-s3m screamtracker modules # audio/s3m screamtracker modules # audio/x-zipped-mod mdz # audio/mod mod # audio/x-mod All modules (mod, s3m, 669, mtm, med, xm, it, mdz, stm, itz, xmz, s3z) # # Taken from loader code from mikmod version 2.14 # by Steve McIntyre (stevem@chiark.greenend.org.uk) # added title printing on 2003-06-24 0 string MAS_UTrack_V00 >14 string >/0 ultratracker V1.%.1s module sound data !:mime audio/x-mod #audio/x-tracker-module 0 string UN05 MikMod UNI format module sound data 0 string Extended\ Module: Fasttracker II module sound data !:mime audio/x-mod #audio/x-tracker-module >17 string >\0 Title: "%s" 21 string/c =!SCREAM! Screamtracker 2 module sound data !:mime audio/x-mod #audio/x-screamtracker-module 21 string BMOD2STM Screamtracker 2 module sound data !:mime audio/x-mod #audio/x-screamtracker-module 1080 string M.K. 4-channel Protracker module sound data !:mime audio/x-mod #audio/x-protracker-module >0 string >\0 Title: "%s" 1080 string M!K! 4-channel Protracker module sound data !:mime audio/x-mod #audio/x-protracker-module >0 string >\0 Title: "%s" 1080 string FLT4 4-channel Startracker module sound data !:mime audio/x-mod #audio/x-startracker-module >0 string >\0 Title: "%s" 1080 string FLT8 8-channel Startracker module sound data !:mime audio/x-mod #audio/x-startracker-module >0 string >\0 Title: "%s" 1080 string 4CHN 4-channel Fasttracker module sound data !:mime audio/x-mod #audio/x-fasttracker-module >0 string >\0 Title: "%s" 1080 string 6CHN 6-channel Fasttracker module sound data !:mime audio/x-mod #audio/x-fasttracker-module >0 string >\0 Title: "%s" 1080 string 8CHN 8-channel Fasttracker module sound data !:mime audio/x-mod #audio/x-fasttracker-module >0 string >\0 Title: "%s" 1080 string CD81 8-channel Octalyser module sound data !:mime audio/x-mod #audio/x-octalysertracker-module >0 string >\0 Title: "%s" 1080 string OKTA 8-channel Octalyzer module sound data !:mime audio/x-mod #audio/x-octalysertracker-module >0 string >\0 Title: "%s" # Not good enough. #1082 string CH #>1080 string >/0 %.2s-channel Fasttracker "oktalyzer" module sound data 1080 string 16CN 16-channel Taketracker module sound data !:mime audio/x-mod #audio/x-taketracker-module >0 string >\0 Title: "%s" 1080 string 32CN 32-channel Taketracker module sound data !:mime audio/x-mod #audio/x-taketracker-module >0 string >\0 Title: "%s" # TOC sound files -Trevor Johnson # 0 string TOC TOC sound file # sidfiles # added name,author,(c) and new RSID type by 2003-06-24 0 string SIDPLAY\ INFOFILE Sidplay info file 0 string PSID PlaySID v2.2+ (AMIGA) sidtune >4 beshort >0 w/ header v%d, >14 beshort =1 single song, >14 beshort >1 %d songs, >16 beshort >0 default song: %d >0x16 string >\0 name: "%s" >0x36 string >\0 author: "%s" >0x56 string >\0 copyright: "%s" 0 string RSID RSID sidtune PlaySID compatible >4 beshort >0 w/ header v%d, >14 beshort =1 single song, >14 beshort >1 %d songs, >16 beshort >0 default song: %d >0x16 string >\0 name: "%s" >0x36 string >\0 author: "%s" >0x56 string >\0 copyright: "%s" # IRCAM sound files - Michael Pruett # http://www-mmsp.ece.mcgill.ca/documents/AudioFormats/IRCAM/IRCAM.html 0 belong 0x64a30100 IRCAM file (VAX little-endian) 0 belong 0x0001a364 IRCAM file (VAX big-endian) 0 belong 0x64a30200 IRCAM file (Sun big-endian) 0 belong 0x0002a364 IRCAM file (Sun little-endian) 0 belong 0x64a30300 IRCAM file (MIPS little-endian) 0 belong 0x0003a364 IRCAM file (MIPS big-endian) 0 belong 0x64a30400 IRCAM file (NeXT big-endian) 0 belong 0x64a30400 IRCAM file (NeXT big-endian) 0 belong 0x0004a364 IRCAM file (NeXT little-endian) # NIST SPHERE 0 string NIST_1A\n\ \ \ 1024\n NIST SPHERE file # Sample Vision 0 string SOUND\ SAMPLE\ DATA\ Sample Vision file # Audio Visual Research 0 string 2BIT Audio Visual Research file, >12 beshort =0 mono, >12 beshort =-1 stereo, >14 beshort x %d bits >16 beshort =0 unsigned, >16 beshort =-1 signed, >22 belong&0x00ffffff x %d Hz, >18 beshort =0 no loop, >18 beshort =-1 loop, >21 ubyte <128 note %d, >22 byte =0 replay 5.485 KHz >22 byte =1 replay 8.084 KHz >22 byte =2 replay 10.971 KHz >22 byte =3 replay 16.168 KHz >22 byte =4 replay 21.942 KHz >22 byte =5 replay 32.336 KHz >22 byte =6 replay 43.885 KHz >22 byte =7 replay 47.261 KHz # SGI SoundTrack 0 string _SGI_SoundTrack SGI SoundTrack project file # ID3 version 2 tags 0 string ID3 Audio file with ID3 version 2 >3 byte x \b.%d >4 byte x \b.%d >>5 byte &0x80 \b, unsynchronized frames >>5 byte &0x40 \b, extended header >>5 byte &0x20 \b, experimental >>5 byte &0x10 \b, footer present ->(6.I) indirect x \b, contains: +>(6.I+10) indirect x \b, contains: # NSF (NES sound file) magic 0 string NESM\x1a NES Sound File >14 string >\0 ("%s" by >46 string >\0 %s, copyright >78 string >\0 %s), >5 byte x version %d, >6 byte x %d tracks, >122 byte&0x2 =1 dual PAL/NTSC >122 byte&0x1 =1 PAL >122 byte&0x1 =0 NTSC +# NSFE (Extended NES sound file) magic +# http://slickproductions.org/docs/NSF/nsfespec.txt +# From: David Pflug +0 string NSFE Extended NES Sound File +>48 search/0x1000 auth +>>&0 string >\0 ("%s" +>>>&1 string >\0 by %s +>>>>&1 string >\0 \b, copyright %s +>>>>>&1 string >\0 \b, ripped by %s +>20 byte x \b), %d tracks, +>18 byte&0x2 =1 dual PAL/NTSC +>18 byte&0x2 =0 +>>18 byte&0x1 =1 PAL +>>18 byte&0x1 =0 NTSC + # Type: SNES SPC700 sound files # From: Josh Triplett 0 string SNES-SPC700\ Sound\ File\ Data\ v SNES SPC700 sound file >&0 string 0.30 \b, version %s >>0x23 byte 0x1B \b, without ID666 tag >>0x23 byte 0x1A \b, with ID666 tag >>>0x2E string >\0 \b, song "%.32s" >>>0x4E string >\0 \b, game "%.32s" # Impulse tracker module (audio/x-it) 0 string IMPM Impulse Tracker module sound data - !:mime audio/x-mod >4 string >\0 "%s" >40 leshort !0 compatible w/ITv%x >42 leshort !0 created w/ITv%x # Imago Orpheus module (audio/x-imf) 60 string IM10 Imago Orpheus module sound data - >0 string >\0 "%s" # From # These are the /etc/magic entries to decode modules, instruments, and # samples in Impulse Tracker's native format. 0 string IMPS Impulse Tracker Sample >18 byte &2 16 bit >18 byte ^2 8 bit >18 byte &4 stereo >18 byte ^4 mono 0 string IMPI Impulse Tracker Instrument >28 leshort !0 ITv%x >30 byte !0 %d samples # Yamaha TX Wave: file(1) magic for Yamaha TX Wave audio files # From 0 string LM8953 Yamaha TX Wave >22 byte 0x49 looped >22 byte 0xC9 non-looped >23 byte 1 33kHz >23 byte 2 50kHz >23 byte 3 16kHz # scream tracker: file(1) magic for Scream Tracker sample files # # From 76 string SCRS Scream Tracker Sample >0 byte 1 sample >0 byte 2 adlib melody >0 byte >2 adlib drum >31 byte &2 stereo >31 byte ^2 mono >31 byte &4 16bit little endian >31 byte ^4 8bit >30 byte 0 unpacked >30 byte 1 packed # audio # From: Cory Dikkers 0 string MMD0 MED music file, version 0 0 string MMD1 OctaMED Pro music file, version 1 0 string MMD3 OctaMED Soundstudio music file, version 3 0 string OctaMEDCmpr OctaMED Soundstudio compressed file 0 string MED MED_Song 0 string SymM Symphonie SymMOD music file # 0 string THX AHX version >3 byte =0 1 module data >3 byte =1 2 module data # 0 string OKTASONG Oktalyzer module data # 0 string DIGI\ Booster\ module\0 %s >20 byte >0 %c >>21 byte >0 \b%c >>>22 byte >0 \b%c >>>>23 byte >0 \b%c >610 string >\0 \b, "%s" # 0 string DBM0 DIGI Booster Pro Module >4 byte >0 V%X. >>5 byte x \b%02X >16 string >\0 \b, "%s" # 0 string FTMN FaceTheMusic module >16 string >\0d \b, "%s" # From: 2003-06-24 0 string AMShdr\32 Velvet Studio AMS Module v2.2 0 string Extreme Extreme Tracker AMS Module v1.3 0 string DDMF Xtracker DMF Module >4 byte x v%i >0xD string >\0 Title: "%s" >0x2B string >\0 Composer: "%s" 0 string DSM\32 Dynamic Studio Module DSM 0 string SONG DigiTrekker DTM Module 0 string DMDL DigiTrakker MDL Module 0 string PSM\32 Protracker Studio PSM Module 44 string PTMF Poly Tracker PTM Module >0 string >\32 Title: "%s" 0 string MT20 MadTracker 2.0 Module MT2 0 string RAD\40by\40REALiTY!! RAD Adlib Tracker Module RAD 0 string RTMM RTM Module 0x426 string MaDoKaN96 XMS Adlib Module >0 string >\0 Composer: "%s" 0 string AMF AMF Module >4 string >\0 Title: "%s" 0 string MODINFO1 Open Cubic Player Module Inforation MDZ 0 string Extended\40Instrument: Fast Tracker II Instrument # From: Takeshi Hamasaki # NOA Nancy Codec file 0 string \210NOA\015\012\032 NOA Nancy Codec Movie file # Yamaha SMAF format 0 string MMMD Yamaha SMAF file # Sharp Jisaku Melody format for PDC 0 string \001Sharp\040JisakuMelody SHARP Cell-Phone ringing Melody >20 string Ver01.00 Ver. 1.00 >>32 byte x , %d tracks # Free lossless audio codec # From: Przemyslaw Augustyniak 0 string fLaC FLAC audio bitstream data !:mime audio/x-flac >4 byte&0x7f >0 \b, unknown version >4 byte&0x7f 0 \b # some common bits/sample values >>20 beshort&0x1f0 0x030 \b, 4 bit >>20 beshort&0x1f0 0x050 \b, 6 bit >>20 beshort&0x1f0 0x070 \b, 8 bit >>20 beshort&0x1f0 0x0b0 \b, 12 bit >>20 beshort&0x1f0 0x0f0 \b, 16 bit >>20 beshort&0x1f0 0x170 \b, 24 bit >>20 byte&0xe 0x0 \b, mono >>20 byte&0xe 0x2 \b, stereo >>20 byte&0xe 0x4 \b, 3 channels >>20 byte&0xe 0x6 \b, 4 channels >>20 byte&0xe 0x8 \b, 5 channels >>20 byte&0xe 0xa \b, 6 channels >>20 byte&0xe 0xc \b, 7 channels >>20 byte&0xe 0xe \b, 8 channels # some common sample rates >>17 belong&0xfffff0 0x0ac440 \b, 44.1 kHz >>17 belong&0xfffff0 0x0bb800 \b, 48 kHz >>17 belong&0xfffff0 0x07d000 \b, 32 kHz >>17 belong&0xfffff0 0x056220 \b, 22.05 kHz >>17 belong&0xfffff0 0x05dc00 \b, 24 kHz >>17 belong&0xfffff0 0x03e800 \b, 16 kHz >>17 belong&0xfffff0 0x02b110 \b, 11.025 kHz >>17 belong&0xfffff0 0x02ee00 \b, 12 kHz >>17 belong&0xfffff0 0x01f400 \b, 8 kHz >>17 belong&0xfffff0 0x177000 \b, 96 kHz >>17 belong&0xfffff0 0x0fa000 \b, 64 kHz >>21 byte&0xf >0 \b, >4G samples >>21 byte&0xf 0 \b >>>22 belong >0 \b, %u samples >>>22 belong 0 \b, length unknown # (ISDN) VBOX voice message file (Wolfram Kleff) 0 string VBOX VBOX voice message data # ReBorn Song Files (.rbs) # David J. Singer 8 string RB40 RBS Song file >29 string ReBorn created by ReBorn >37 string Propellerhead created by ReBirth # Synthesizer Generator and Kimwitu share their file format 0 string A#S#C#S#S#L#V#3 Synthesizer Generator or Kimwitu data # Kimwitu++ uses a slightly different magic 0 string A#S#C#S#S#L#HUB Kimwitu++ data # From "Simon Hosie 0 string TFMX-SONG TFMX module sound data # Monkey's Audio compressed audio format (.ape) # From danny.milo@gmx.net (Danny Milosavljevic) # New version from Abel Cheung 0 string MAC\040 Monkey's Audio compressed format !:mime audio/x-ape >4 uleshort >0x0F8B version %d >>(0x08.l) uleshort =1000 with fast compression >>(0x08.l) uleshort =2000 with normal compression >>(0x08.l) uleshort =3000 with high compression >>(0x08.l) uleshort =4000 with extra high compression >>(0x08.l) uleshort =5000 with insane compression >>(0x08.l+18) uleshort =1 \b, mono >>(0x08.l+18) uleshort =2 \b, stereo >>(0x08.l+20) ulelong x \b, sample rate %d >4 uleshort <0x0F8C version %d >>6 uleshort =1000 with fast compression >>6 uleshort =2000 with normal compression >>6 uleshort =3000 with high compression >>6 uleshort =4000 with extra high compression >>6 uleshort =5000 with insane compression >>10 uleshort =1 \b, mono >>10 uleshort =2 \b, stereo >>12 ulelong x \b, sample rate %d # adlib sound files # From Gurkan Sengun , http://www.linuks.mine.nu 0 string RAWADATA RdosPlay RAW 1068 string RoR AMUSIC Adlib Tracker 0 string JCH EdLib 0 string mpu401tr MPU-401 Trakker 0 string SAdT Surprise! Adlib Tracker >4 byte x Version %d 0 string XAD! eXotic ADlib 0 string ofTAZ! eXtra Simple Music # Spectrum 128 tunes (.ay files). # From: Emanuel Haupt 0 string ZXAYEMUL Spectrum 128 tune 0 string \0BONK BONK, #>5 byte x version %d >14 byte x %d channel(s), >15 byte =1 lossless, >15 byte =0 lossy, >16 byte x mid-side 384 string LockStream LockStream Embedded file (mostly MP3 on old Nokia phones) # format VQF (proprietary codec for sound) # some infos on the header file available at : # http://www.twinvq.org/english/technology_format.html 0 string TWIN97012000 VQF data >27 short 0 \b, Mono >27 short 1 \b, Stereo >31 short >0 \b, %d kbit/s >35 short >0 \b, %d kHz # Nelson A. de Oliveira (naoliv@gmail.com) # .eqf 0 string Winamp\ EQ\ library\ file %s # it will match only versions like v. # Since I saw only eqf files with version v1.1 I think that it's OK >23 string x \b%.4s # .preset 0 string [Equalizer\ preset] XMMS equalizer preset # .m3u 0 search/1 #EXTM3U M3U playlist text # .pls 0 search/1 [playlist] PLS playlist text # licq.conf 1 string [licq] LICQ configuration file # Atari ST audio files by Dirk Jagdmann 0 string ICE! SNDH Atari ST music 0 string SC68\ Music-file\ /\ (c)\ (BeN)jami sc68 Atari ST music # musepak support From: "Jiri Pejchal" 0 string MP+ Musepack audio !:mime audio/x-musepack >3 byte 255 \b, SV pre8 >3 byte&0xF 0x6 \b, SV 6 >3 byte&0xF 0x8 \b, SV 8 >3 byte&0xF 0x7 \b, SV 7 >>3 byte&0xF0 0x0 \b.0 >>3 byte&0xF0 0x10 \b.1 >>3 byte&0xF0 240 \b.15 >>10 byte&0xF0 0x0 \b, no profile >>10 byte&0xF0 0x10 \b, profile 'Unstable/Experimental' >>10 byte&0xF0 0x50 \b, quality 0 >>10 byte&0xF0 0x60 \b, quality 1 >>10 byte&0xF0 0x70 \b, quality 2 (Telephone) >>10 byte&0xF0 0x80 \b, quality 3 (Thumb) >>10 byte&0xF0 0x90 \b, quality 4 (Radio) >>10 byte&0xF0 0xA0 \b, quality 5 (Standard) >>10 byte&0xF0 0xB0 \b, quality 6 (Xtreme) >>10 byte&0xF0 0xC0 \b, quality 7 (Insane) >>10 byte&0xF0 0xD0 \b, quality 8 (BrainDead) >>10 byte&0xF0 0xE0 \b, quality 9 >>10 byte&0xF0 0xF0 \b, quality 10 >>27 byte 0x0 \b, Buschmann 1.7.0-9, Klemm 0.90-1.05 >>27 byte 102 \b, Beta 1.02 >>27 byte 104 \b, Beta 1.04 >>27 byte 105 \b, Alpha 1.05 >>27 byte 106 \b, Beta 1.06 >>27 byte 110 \b, Release 1.1 >>27 byte 111 \b, Alpha 1.11 >>27 byte 112 \b, Beta 1.12 >>27 byte 113 \b, Alpha 1.13 >>27 byte 114 \b, Beta 1.14 >>27 byte 115 \b, Alpha 1.15 # IMY # from http://filext.com/detaillist.php?extdetail=IMY # http://cellphones.about.com/od/cellularfaqs/f/rf_imelody.htm # http://download.ncl.ie/doc/api/ie/ncl/media/music/IMelody.html # http://www.wx800.com/msg/download/irda/iMelody.pdf 0 string BEGIN:IMELODY iMelody Ringtone Format # From: "Mateus Caruccio" # guitar pro v3,4,5 from http://filext.com/file-extension/gp3 0 string \030FICHIER\ GUITAR\ PRO\ v3. Guitar Pro Ver. 3 Tablature # From: "Leslie P. Polzer" 60 string SONG SoundFX Module sound file # Type: Adaptive Multi-Rate Codec # URL: http://filext.com/detaillist.php?extdetail=AMR # From: Russell Coker 0 string #!AMR Adaptive Multi-Rate Codec (GSM telephony) # Type: SuperCollider 3 Synth Definition File Format # From: Mario Lang 0 string SCgf SuperCollider3 Synth Definition file, >4 belong x version %d # Type: True Audio Lossless Audio # URL: http://wiki.multimedia.cx/index.php?title=True_Audio # From: Mike Melanson 0 string TTA1 True Audio Lossless Audio # Type: WavPack Lossless Audio # URL: http://wiki.multimedia.cx/index.php?title=WavPack # From: Mike Melanson 0 string wvpk WavPack Lossless Audio # From Fabio R. Schmidlin # VGM music file 0 string Vgm\ >9 ubyte >0 VGM Video Game Music dump v >>9 ubyte/16 >0 \b%d >>9 ubyte&0x0F x \b%d >>8 ubyte/16 x \b.%d >>8 ubyte&0x0F >0 \b%d #Get soundchips >>8 ubyte x \b, soundchip(s)= >>0x0C ulelong >0 SN76489, >>0x10 ulelong >0 YM2413, >>0x2C ulelong >0 YM2612, >>0x30 ulelong >0 YM2151, >>0x38 ulelong >0 Sega PCM, >>0x34 ulelong >0xC >>>0x40 ulelong >0 RF5C68, >>0x34 ulelong >0x10 >>>0x44 ulelong >0 YM2203, >>0x34 ulelong >0x14 >>>0x48 ulelong >0 YM2608, >>0x34 ulelong >0x18 >>>0x4C lelong >0 YM2610, >>>0x4C lelong <0 YM2610B, >>0x34 ulelong >0x1C >>>0x50 ulelong >0 YM3812, >>0x34 ulelong >0x20 >>>0x54 ulelong >0 YM3526, >>0x34 ulelong >0x24 >>>0x58 ulelong >0 Y8950, >>0x34 ulelong >0x28 >>>0x5C ulelong >0 YMF262, >>0x34 ulelong >0x2C >>>0x60 ulelong >0 YMF278B, >>0x34 ulelong >0x30 >>>0x64 ulelong >0 YMF271, >>0x34 ulelong >0x34 >>>0x68 ulelong >0 YMZ280B, >>0x34 ulelong >0x38 >>>0x6C ulelong >0 RF5C164, >>0x34 ulelong >0x3C >>>0x70 ulelong >0 PWM, >>0x34 ulelong >0x40 >>>0x74 ulelong >0 >>>>0x78 ubyte 0x00 AY-3-8910, >>>>0x78 ubyte 0x01 AY-3-8912, >>>>0x78 ubyte 0x02 AY-3-8913, >>>>0x78 ubyte 0x03 AY-3-8930, >>>>0x78 ubyte 0x10 YM2149, >>>>0x78 ubyte 0x11 YM3439, # GVOX Encore file format # Since this is a proprietary file format and there is no publicly available # format specification, this is just based on induction # 0 string SCOW >4 byte 0xc4 GVOX Encore music, version 5.0 or above >4 byte 0xc2 GVOX Encore music, version < 5.0 0 string ZBOT >4 byte 0xc5 GVOX Encore music, version < 5.0 diff --git a/contrib/file/magic/Magdir/cafebabe b/contrib/file/magic/Magdir/cafebabe index 4c58fc6c932f..51e97c4ab9f4 100644 --- a/contrib/file/magic/Magdir/cafebabe +++ b/contrib/file/magic/Magdir/cafebabe @@ -1,63 +1,69 @@ #------------------------------------------------------------------------------ -# $File: cafebabe,v 1.17 2015/01/01 17:07:00 christos Exp $ +# $File: cafebabe,v 1.20 2015/05/29 14:21:58 christos Exp $ # Cafe Babes unite! # # Since Java bytecode and Mach-O universal binaries have the same magic number, # the test must be performed in the same "magic" sequence to get both right. # The long at offset 4 in a Mach-O universal binary tells the number of # architectures; the short at offset 4 in a Java bytecode file is the JVM minor # version and the short at offset 6 is the JVM major version. Since there are only # only 18 labeled Mach-O architectures at current, and the first released # Java class format was version 43.0, we can safely choose any number # between 18 and 39 to test the number of architectures against # (and use as a hack). Let's not use 18, because the Mach-O people # might add another one or two as time goes by... # ### JAVA START ### 0 belong 0xcafebabe >4 belong >30 compiled Java class data, !:mime application/x-java-applet >>6 beshort x version %d. >>4 beshort x \b%d # Which is which? #>>4 belong 0x032d (Java 1.0) #>>4 belong 0x032d (Java 1.1) >>4 belong 0x002e (Java 1.2) >>4 belong 0x002f (Java 1.3) >>4 belong 0x0030 (Java 1.4) >>4 belong 0x0031 (Java 1.5) >>4 belong 0x0032 (Java 1.6) +>>4 belong 0x0033 (Java 1.7) +>>4 belong 0x0034 (Java 1.8) 0 belong 0xcafed00d JAR compressed with pack200, >5 byte x version %d. >4 byte x \b%d !:mime application/x-java-pack200 0 belong 0xcafed00d JAR compressed with pack200, >5 byte x version %d. >4 byte x \b%d !:mime application/x-java-pack200 ### JAVA END ### ### MACH-O START ### 0 name mach-o \b [ >0 use mach-o-cpu \b >(8.L) indirect \b: >0 belong x \b] 0 belong 0xcafebabe >4 belong 1 Mach-O universal binary with 1 architecture: +!:mime application/x-mach-binary >>8 use mach-o \b >4 belong >1 >>4 belong <20 Mach-O universal binary with %d architectures: +!:mime application/x-mach-binary >>>8 use mach-o \b >>>28 use mach-o \b ->>4 belong >2 +>>4 belong 2 >>>48 use mach-o \b ->>4 belong >3 +>>4 belong 3 >>>68 use mach-o \b +>>4 belong 4 +>>>88 use mach-o \b ### MACH-O END ### diff --git a/contrib/file/magic/Magdir/cbor b/contrib/file/magic/Magdir/cbor new file mode 100644 index 000000000000..c780dc6594d3 --- /dev/null +++ b/contrib/file/magic/Magdir/cbor @@ -0,0 +1,21 @@ + +#------------------------------------------------------------------------------ +# $File: cbor,v 1.1 2015/01/28 01:05:21 christos Exp $ +# cbor: file(1) magic for CBOR files as defined in RFC 7049 + +0 string \xd9\xd9\xf7 Concise Binary Object Representation (CBOR) container +!:mime application/cbor +>3 ubyte <0x20 (positive integer) +>3 ubyte <0x40 +>>3 ubyte >0x1f (negative integer) +>3 ubyte <0x60 +>>3 ubyte >0x3f (byte string) +>3 ubyte <0x80 +>>3 ubyte >0x5f (text string) +>3 ubyte <0xa0 +>3 ubyte >0x7f (array) +>3 ubyte <0xc0 +>>3 ubyte >0x9f (map) +>3 ubyte <0xe0 +>>3 ubyte >0xbf (tagged) +>3 ubyte >0xdf (other) diff --git a/contrib/file/magic/Magdir/commands b/contrib/file/magic/Magdir/commands index 3d9748926e22..153af5e0559b 100644 --- a/contrib/file/magic/Magdir/commands +++ b/contrib/file/magic/Magdir/commands @@ -1,110 +1,112 @@ #------------------------------------------------------------------------------ -# $File: commands,v 1.51 2014/09/27 00:12:55 christos Exp $ +# $File: commands,v 1.52 2015/06/04 19:16:55 christos Exp $ # commands: file(1) magic for various shells and interpreters # #0 string/w : shell archive or script for antique kernel text 0 string/wt #!\ /bin/sh POSIX shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /bin/sh POSIX shell script executable (binary data) !:mime text/x-shellscript 0 string/wt #!\ /bin/csh C shell script text executable !:mime text/x-shellscript # korn shell magic, sent by George Wu, gwu@clyde.att.com 0 string/wt #!\ /bin/ksh Korn shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /bin/ksh Korn shell script executable (binary data) !:mime text/x-shellscript 0 string/wt #!\ /bin/tcsh Tenex C shell script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/bin/tcsh Tenex C shell script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/local/tcsh Tenex C shell script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bin/tcsh Tenex C shell script text executable !:mime text/x-shellscript # # zsh/ash/ae/nawk/gawk magic from cameron@cs.unsw.oz.au (Cameron Simpson) 0 string/wt #!\ /bin/zsh Paul Falstad's zsh script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/bin/zsh Paul Falstad's zsh script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bin/zsh Paul Falstad's zsh script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bin/ash Neil Brown's ash script text executable !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bin/ae Neil Brown's ae script text executable !:mime text/x-shellscript 0 string/wt #!\ /bin/nawk new awk script text executable !:mime text/x-nawk 0 string/wt #!\ /usr/bin/nawk new awk script text executable !:mime text/x-nawk 0 string/wt #!\ /usr/local/bin/nawk new awk script text executable !:mime text/x-nawk 0 string/wt #!\ /bin/gawk GNU awk script text executable !:mime text/x-gawk 0 string/wt #!\ /usr/bin/gawk GNU awk script text executable !:mime text/x-gawk 0 string/wt #!\ /usr/local/bin/gawk GNU awk script text executable !:mime text/x-gawk # 0 string/wt #!\ /bin/awk awk script text executable !:mime text/x-awk 0 string/wt #!\ /usr/bin/awk awk script text executable !:mime text/x-awk 0 regex/4096 =^\\s{0,100}BEGIN\\s{0,100}[{] awk or perl script text # AT&T Bell Labs' Plan 9 shell 0 string/wt #!\ /bin/rc Plan 9 rc shell script text executable # bash shell magic, from Peter Tobias (tobias@server.et-inf.fho-emden.de) 0 string/wt #!\ /bin/bash Bourne-Again shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /bin/bash Bourne-Again shell script executable (binary data) !:mime text/x-shellscript 0 string/wt #!\ /usr/bin/bash Bourne-Again shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /usr/bin/bash Bourne-Again shell script executable (binary data) !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bash Bourne-Again shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /usr/local/bash Bourne-Again shell script executable (binary data) !:mime text/x-shellscript 0 string/wt #!\ /usr/local/bin/bash Bourne-Again shell script text executable !:mime text/x-shellscript 0 string/wb #!\ /usr/local/bin/bash Bourne-Again shell script executable (binary data) !:mime text/x-shellscript +0 string/wt #!\ /usr/bin/env\ bash Bourne-Again shell script text executable +!:mime text/x-shellscript # PHP scripts # Ulf Harnhammar 0 search/1/c = 0 string =24 regex [0-9.]+ \b, version %s !:mime text/x-php 0 string Zend\x00 PHP script Zend Optimizer data 0 string/t $! DCL command file # Type: Pdmenu # URL: http://packages.debian.org/pdmenu # From: Edward Betts 0 string #!/usr/bin/pdmenu Pdmenu configuration file text diff --git a/contrib/file/magic/Magdir/compress b/contrib/file/magic/Magdir/compress index beb8ebe66a40..c2266d4484a1 100644 --- a/contrib/file/magic/Magdir/compress +++ b/contrib/file/magic/Magdir/compress @@ -1,263 +1,264 @@ #------------------------------------------------------------------------------ -# $File: compress,v 1.62 2014/09/13 14:27:12 christos Exp $ +# $File: compress,v 1.63 2015/03/11 19:27:35 christos Exp $ # compress: file(1) magic for pure-compression formats (no archives) # # compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, etc. # # Formats for various forms of compressed data # Formats for "compress" proper have been moved into "compress.c", # because it tries to uncompress it to figure out what's inside. # standard unix compress 0 string \037\235 compress'd data !:mime application/x-compress !:apple LZIVZIVU >2 byte&0x80 >0 block compressed >2 byte&0x1f x %d bits # gzip (GNU zip, not to be confused with Info-ZIP or PKWARE zip archiver) # Edited by Chris Chittleborough , March 2002 # * Original filename is only at offset 10 if "extra field" absent # * Produce shorter output - notably, only report compression methods # other than 8 ("deflate", the only method defined in RFC 1952). 0 string \037\213 gzip compressed data !:mime application/x-gzip !:strength * 2 >2 byte <8 \b, reserved method >2 byte >8 \b, unknown method >3 byte &0x01 \b, ASCII >3 byte &0x02 \b, has CRC >3 byte &0x04 \b, extra field >3 byte&0xC =0x08 >>10 string x \b, was "%s" >3 byte &0x10 \b, has comment >3 byte &0x20 \b, encrypted >4 ledate >0 \b, last modified: %s >8 byte 2 \b, max compression >8 byte 4 \b, max speed >9 byte =0x00 \b, from FAT filesystem (MS-DOS, OS/2, NT) >9 byte =0x01 \b, from Amiga >9 byte =0x02 \b, from VMS >9 byte =0x03 \b, from Unix >9 byte =0x04 \b, from VM/CMS >9 byte =0x05 \b, from Atari >9 byte =0x06 \b, from HPFS filesystem (OS/2, NT) >9 byte =0x07 \b, from MacOS >9 byte =0x08 \b, from Z-System >9 byte =0x09 \b, from CP/M >9 byte =0x0A \b, from TOPS/20 >9 byte =0x0B \b, from NTFS filesystem (NT) >9 byte =0x0C \b, from QDOS >9 byte =0x0D \b, from Acorn RISCOS # packed data, Huffman (minimum redundancy) codes on a byte-by-byte basis 0 string \037\036 packed data !:mime application/octet-stream >2 belong >1 \b, %d characters originally >2 belong =1 \b, %d character originally # # This magic number is byte-order-independent. 0 short 0x1f1f old packed data !:mime application/octet-stream # XXX - why *two* entries for "compacted data", one of which is # byte-order independent, and one of which is byte-order dependent? # 0 short 0x1fff compacted data !:mime application/octet-stream # This string is valid for SunOS (BE) and a matching "short" is listed # in the Ultrix (LE) magic file. 0 string \377\037 compacted data !:mime application/octet-stream 0 short 0145405 huf output !:mime application/octet-stream # bzip2 0 string BZh bzip2 compressed data !:mime application/x-bzip2 >3 byte >47 \b, block size = %c00k # lzip 0 string LZIP lzip compressed data !:mime application/x-lzip >4 byte x \b, version: %d # squeeze and crunch # Michael Haardt 0 beshort 0x76FF squeezed data, >4 string x original name %s 0 beshort 0x76FE crunched data, >2 string x original name %s 0 beshort 0x76FD LZH compressed data, >2 string x original name %s # Freeze 0 string \037\237 frozen file 2.1 0 string \037\236 frozen file 1.0 (or gzip 0.5) # SCO compress -H (LZH) 0 string \037\240 SCO compress -H (LZH) data # European GSM 06.10 is a provisional standard for full-rate speech # transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse # excitation/long term prediction) coding at 13 kbit/s. # # There's only a magic nibble (4 bits); that nibble repeats every 33 # bytes. This isn't suited for use, but maybe we can use it someday. # # This will cause very short GSM files to be declared as data and # mismatches to be declared as data too! #0 byte&0xF0 0xd0 data #>33 byte&0xF0 0xd0 #>66 byte&0xF0 0xd0 #>99 byte&0xF0 0xd0 #>132 byte&0xF0 0xd0 GSM 06.10 compressed audio # bzip a block-sorting file compressor # by Julian Seward and others # #0 string BZ bzip compressed data #>2 byte x \b, version: %c #>3 string =1 \b, compression block size 100k #>3 string =2 \b, compression block size 200k #>3 string =3 \b, compression block size 300k #>3 string =4 \b, compression block size 400k #>3 string =5 \b, compression block size 500k #>3 string =6 \b, compression block size 600k #>3 string =7 \b, compression block size 700k #>3 string =8 \b, compression block size 800k #>3 string =9 \b, compression block size 900k # lzop from 0 string \x89\x4c\x5a\x4f\x00\x0d\x0a\x1a\x0a lzop compressed data >9 beshort <0x0940 >>9 byte&0xf0 =0x00 - version 0. >>9 beshort&0x0fff x \b%03x, >>13 byte 1 LZO1X-1, >>13 byte 2 LZO1X-1(15), >>13 byte 3 LZO1X-999, ## >>22 bedate >0 last modified: %s, >>14 byte =0x00 os: MS-DOS >>14 byte =0x01 os: Amiga >>14 byte =0x02 os: VMS >>14 byte =0x03 os: Unix >>14 byte =0x05 os: Atari >>14 byte =0x06 os: OS/2 >>14 byte =0x07 os: MacOS >>14 byte =0x0A os: Tops/20 >>14 byte =0x0B os: WinNT >>14 byte =0x0E os: Win32 >9 beshort >0x0939 >>9 byte&0xf0 =0x00 - version 0. >>9 byte&0xf0 =0x10 - version 1. >>9 byte&0xf0 =0x20 - version 2. >>9 beshort&0x0fff x \b%03x, >>15 byte 1 LZO1X-1, >>15 byte 2 LZO1X-1(15), >>15 byte 3 LZO1X-999, ## >>25 bedate >0 last modified: %s, >>17 byte =0x00 os: MS-DOS >>17 byte =0x01 os: Amiga >>17 byte =0x02 os: VMS >>17 byte =0x03 os: Unix >>17 byte =0x05 os: Atari >>17 byte =0x06 os: OS/2 >>17 byte =0x07 os: MacOS >>17 byte =0x0A os: Tops/20 >>17 byte =0x0B os: WinNT >>17 byte =0x0E os: Win32 # 4.3BSD-Quasijarus Strong Compression # http://minnie.tuhs.org/Quasijarus/compress.html 0 string \037\241 Quasijarus strong compressed data # From: Cory Dikkers 0 string XPKF Amiga xpkf.library compressed data 0 string PP11 Power Packer 1.1 compressed data 0 string PP20 Power Packer 2.0 compressed data, >4 belong 0x09090909 fast compression >4 belong 0x090A0A0A mediocre compression >4 belong 0x090A0B0B good compression >4 belong 0x090A0C0C very good compression >4 belong 0x090A0C0D best compression # 7-zip archiver, from Thomas Klausner (wiz@danbala.tuwien.ac.at) # http://www.7-zip.org or DOC/7zFormat.txt # 0 string 7z\274\257\047\034 7-zip archive data, >6 byte x version %d >7 byte x \b.%d !:mime application/x-7z-compressed # Type: LZMA 0 lelong&0xffffff =0x5d >12 leshort 0xff LZMA compressed data, !:mime application/x-lzma >>5 lequad =0xffffffffffffffff streamed >>5 lequad !0xffffffffffffffff non-streamed, size %lld >12 leshort 0 LZMA compressed data, >>5 lequad =0xffffffffffffffff streamed >>5 lequad !0xffffffffffffffff non-streamed, size %lld # http://tukaani.org/xz/xz-file-format.txt 0 ustring \xFD7zXZ\x00 XZ compressed data +!:strength * 2 !:mime application/x-xz # https://github.com/ckolivas/lrzip/blob/master/doc/magic.header.txt 0 string LRZI LRZIP compressed data >4 byte x - version %d >5 byte x \b.%d !:mime application/x-lrzip # http://fastcompression.blogspot.fi/2013/04/lz4-streaming-format-final.html 0 lelong 0x184d2204 LZ4 compressed data (v1.4+) !:mime application/x-lz4 # Added by osm0sis@xda-developers.com 0 lelong 0x184c2103 LZ4 compressed data (v1.0-v1.3) !:mime application/x-lz4 0 lelong 0x184c2102 LZ4 compressed data (v0.1-v0.9) !:mime application/x-lz4 # AFX compressed files (Wolfram Kleff) 2 string -afx- AFX compressed file data # Supplementary magic data for the file(1) command to support # rzip(1). The format is described in magic(5). # # Copyright (C) 2003 by Andrew Tridgell. You may do whatever you want with # this file. # 0 string RZIP rzip compressed data >4 byte x - version %d >5 byte x \b.%d >6 belong x (%d bytes) 0 string ArC\x01 FreeArc archive # Type: DACT compressed files 0 long 0x444354C3 DACT compressed data >4 byte >-1 (version %i. >5 byte >-1 %i. >6 byte >-1 %i) >7 long >0 , original size: %i bytes >15 long >30 , block size: %i bytes # Valve Pack (VPK) files 0 lelong 0x55aa1234 Valve Pak file >0x4 lelong x \b, version %u >0x8 lelong x \b, %u entries # Snappy framing format # http://code.google.com/p/snappy/source/browse/trunk/framing_format.txt 0 string \377\006\0\0sNaPpY snappy framed data !:mime application/x-snappy-framed # qpress, http://www.quicklz.com/ 0 string qpress10 qpress compressed data !:mime application/x-qpress # Zlib https://www.ietf.org/rfc/rfc6713.txt 0 beshort%31 =0 >0 byte&0xf =8 >>0 byte&0x80 =0 zlib compressed data !:mime application/zlib diff --git a/contrib/file/magic/Magdir/console b/contrib/file/magic/Magdir/console index 27227a4126b2..9dee3ffc5f14 100644 --- a/contrib/file/magic/Magdir/console +++ b/contrib/file/magic/Magdir/console @@ -1,264 +1,274 @@ #------------------------------------------------------------------------------ -# $File: console,v 1.19 2013/02/06 14:18:52 christos Exp $ +# $File: console,v 1.20 2015/03/15 23:21:42 christos Exp $ # Console game magic # Toby Deshane # ines: file(1) magic for Marat's iNES Nintendo Entertainment System # ROM dump format 0 string NES\032 iNES ROM dump, >4 byte x %dx16k PRG >5 byte x \b, %dx8k CHR >6 byte&0x01 =0x1 \b, [Vert.] >6 byte&0x01 =0x0 \b, [Horiz.] >6 byte&0x02 =0x2 \b, [SRAM] >6 byte&0x04 =0x4 \b, [Trainer] >6 byte&0x04 =0x8 \b, [4-Scr] #------------------------------------------------------------------------------ # gameboy: file(1) magic for the Nintendo (Color) Gameboy raw ROM format # 0x104 belong 0xCEED6666 Gameboy ROM: >0x134 string >\0 "%.16s" >0x146 byte 0x03 \b,[SGB] >0x147 byte 0x00 \b, [ROM ONLY] >0x147 byte 0x01 \b, [ROM+MBC1] >0x147 byte 0x02 \b, [ROM+MBC1+RAM] >0x147 byte 0x03 \b, [ROM+MBC1+RAM+BATT] >0x147 byte 0x05 \b, [ROM+MBC2] >0x147 byte 0x06 \b, [ROM+MBC2+BATTERY] >0x147 byte 0x08 \b, [ROM+RAM] >0x147 byte 0x09 \b, [ROM+RAM+BATTERY] >0x147 byte 0x0B \b, [ROM+MMM01] >0x147 byte 0x0C \b, [ROM+MMM01+SRAM] >0x147 byte 0x0D \b, [ROM+MMM01+SRAM+BATT] >0x147 byte 0x0F \b, [ROM+MBC3+TIMER+BATT] >0x147 byte 0x10 \b, [ROM+MBC3+TIMER+RAM+BATT] >0x147 byte 0x11 \b, [ROM+MBC3] >0x147 byte 0x12 \b, [ROM+MBC3+RAM] >0x147 byte 0x13 \b, [ROM+MBC3+RAM+BATT] >0x147 byte 0x19 \b, [ROM+MBC5] >0x147 byte 0x1A \b, [ROM+MBC5+RAM] >0x147 byte 0x1B \b, [ROM+MBC5+RAM+BATT] >0x147 byte 0x1C \b, [ROM+MBC5+RUMBLE] >0x147 byte 0x1D \b, [ROM+MBC5+RUMBLE+SRAM] >0x147 byte 0x1E \b, [ROM+MBC5+RUMBLE+SRAM+BATT] >0x147 byte 0x1F \b, [Pocket Camera] >0x147 byte 0xFD \b, [Bandai TAMA5] >0x147 byte 0xFE \b, [Hudson HuC-3] >0x147 byte 0xFF \b, [Hudson HuC-1] >0x148 byte 0 \b, ROM: 256Kbit >0x148 byte 1 \b, ROM: 512Kbit >0x148 byte 2 \b, ROM: 1Mbit >0x148 byte 3 \b, ROM: 2Mbit >0x148 byte 4 \b, ROM: 4Mbit >0x148 byte 5 \b, ROM: 8Mbit >0x148 byte 6 \b, ROM: 16Mbit >0x148 byte 0x52 \b, ROM: 9Mbit >0x148 byte 0x53 \b, ROM: 10Mbit >0x148 byte 0x54 \b, ROM: 12Mbit >0x149 byte 1 \b, RAM: 16Kbit >0x149 byte 2 \b, RAM: 64Kbit >0x149 byte 3 \b, RAM: 128Kbit >0x149 byte 4 \b, RAM: 1Mbit #>0x14e long x \b, CRC: %x #------------------------------------------------------------------------------ # genesis: file(1) magic for the Sega MegaDrive/Genesis raw ROM format # 0x100 string SEGA Sega MegaDrive/Genesis raw ROM dump >0x120 string >\0 Name: "%.16s" >0x110 string >\0 %.16s >0x1B0 string RA with SRAM #------------------------------------------------------------------------------ # genesis: file(1) magic for the Super MegaDrive ROM dump format # 0x280 string EAGN Super MagicDrive ROM dump >0 byte x %dx16k blocks >2 byte 0 \b, last in series or standalone >2 byte >0 \b, split ROM >8 byte 0xAA >9 byte 0xBB #------------------------------------------------------------------------------ # genesis: file(1) alternate magic for the Super MegaDrive ROM dump format # 0x280 string EAMG Super MagicDrive ROM dump >0 byte x %dx16k blocks >2 byte x \b, last in series or standalone >8 byte 0xAA >9 byte 0xBB #------------------------------------------------------------------------------ # smsgg: file(1) magic for Sega Master System and Game Gear ROM dumps # # Does not detect all images. Very preliminary guesswork. Need more data # on format. # # FIXME: need a little more info...;P # #0 byte 0xF3 #>1 byte 0xED Sega Master System/Game Gear ROM dump #>1 byte 0x31 Sega Master System/Game Gear ROM dump #>1 byte 0xDB Sega Master System/Game Gear ROM dump #>1 byte 0xAF Sega Master System/Game Gear ROM dump #>1 byte 0xC3 Sega Master System/Game Gear ROM dump #------------------------------------------------------------------------------ # dreamcast: file(1) uncertain magic for the Sega Dreamcast VMU image format # 0 belong 0x21068028 Sega Dreamcast VMU game image 0 string LCDi Dream Animator file #------------------------------------------------------------------------------ # v64: file(1) uncertain magic for the V64 format N64 ROM dumps # 0 belong 0x37804012 V64 Nintendo 64 ROM dump # From: "Nelson A. de Oliveira" # Nintendo .nds 192 string \044\377\256Qi\232 Nintendo DS Game ROM Image # Nintendo .gba 0 string \056\000\000\352$\377\256Qi Nintendo Game Boy Advance ROM Image #------------------------------------------------------------------------------ # msx: file(1) magic for MSX game cartridge dumps # Too simple - MPi #0 beshort 0x4142 MSX game cartridge dump #------------------------------------------------------------------------------ # Sony Playstation executables (Adam Sjoegren ) : 0 string PS-X\ EXE Sony Playstation executable # Area: >113 string x (%s) #------------------------------------------------------------------------------ # Microsoft Xbox executables .xbe (Esa Hyytia ) 0 string XBEH XBE, Microsoft Xbox executable # probabilistic checks whether signed or not >0x0004 ulelong =0x0 >>&2 ulelong =0x0 >>>&2 ulelong =0x0 \b, not signed >0x0004 ulelong >0 >>&2 ulelong >0 >>>&2 ulelong >0 \b, signed # expect base address of 0x10000 >0x0104 ulelong =0x10000 >>(0x0118-0x0FF60) ulelong&0x80000007 0x80000007 \b, all regions >>(0x0118-0x0FF60) ulelong&0x80000007 !0x80000007 >>>(0x0118-0x0FF60) ulelong >0 (regions: >>>>(0x0118-0x0FF60) ulelong &0x00000001 NA >>>>(0x0118-0x0FF60) ulelong &0x00000002 Japan >>>>(0x0118-0x0FF60) ulelong &0x00000004 Rest_of_World >>>>(0x0118-0x0FF60) ulelong &0x80000000 Manufacturer >>>(0x0118-0x0FF60) ulelong >0 \b) # -------------------------------- # Microsoft Xbox data file formats 0 string XIP0 XIP, Microsoft Xbox data 0 string XTF0 XTF, Microsoft Xbox data # Atari Lynx cartridge dump (EXE/BLL header) # From: "Stefan A. Haubenthal" # Double-check that the image type matches too, 0x8008 conflicts with # 8 character OMF-86 object file headers. 0 beshort 0x8008 >6 string BS93 Lynx homebrew cartridge >>2 beshort x \b, RAM start $%04x >6 string LYNX Lynx cartridge >>2 beshort x \b, RAM start $%04x # Opera file system that is used on the 3DO console # From: Serge van den Boom 0 string \x01ZZZZZ\x01 3DO "Opera" file system -# From Gurkan Sengun , www.linuks.mine.nu +# From: Gurkan Sengun , www.linuks.mine.nu +# From: David Pflug +# is the offset 12 or the offset 16 correct? +# GBS (Game Boy Sound) magic +# ftp://ftp.modland.com/pub/documents/format_documentation/\ +# Gameboy%20Sound%20System%20(.gbs).txt 0 string GBS Nintendo Gameboy Music/Audio Data -12 string GameBoy\ Music\ Module Nintendo Gameboy Music Module +#12 string GameBoy\ Music\ Module Nintendo Gameboy Music Module +>16 string >\0 ("%s" by +>48 string >\0 %s, copyright +>80 string >\0 %s), +>3 byte x version %d, +>4 byte x %d tracks # Playstations Patch Files from: From: Thomas Klausner 0 string PPF30 Playstation Patch File version 3.0 >5 byte 0 \b, PPF 1.0 patch >5 byte 1 \b, PPF 2.0 patch >5 byte 2 \b, PPF 3.0 patch >>56 byte 0 \b, Imagetype BIN (any) >>56 byte 1 \b, Imagetype GI (PrimoDVD) >>57 byte 0 \b, Blockcheck disabled >>57 byte 1 \b, Blockcheck enabled >>58 byte 0 \b, Undo data not available >>58 byte 1 \b, Undo data available >6 string x \b, description: %s 0 string PPF20 Playstation Patch File version 2.0 >5 byte 0 \b, PPF 1.0 patch >5 byte 1 \b, PPF 2.0 patch >>56 lelong >0 \b, size of file to patch %d >6 string x \b, description: %s 0 string PPF10 Playstation Patch File version 1.0 >5 byte 0 \b, Simple Encoding >6 string x \b, description: %s # From: Daniel Dawson # SNES9x .smv "movie" file format. 0 string SMV\x1A SNES9x input recording >0x4 lelong x \b, version %d # version 4 is latest so far >0x4 lelong <5 >>0x8 ledate x \b, recorded at %s >>0xc lelong >0 \b, rerecorded %d times >>0x10 lelong x \b, %d frames long >>0x14 byte >0 \b, data for controller(s): >>>0x14 byte &0x1 #1 >>>0x14 byte &0x2 #2 >>>0x14 byte &0x4 #3 >>>0x14 byte &0x8 #4 >>>0x14 byte &0x10 #5 >>0x15 byte ^0x1 \b, begins from snapshot >>0x15 byte &0x1 \b, begins from reset >>0x15 byte ^0x2 \b, NTSC standard >>0x15 byte &0x2 \b, PAL standard >>0x17 byte &0x1 \b, settings: # WIP1Timing not used as of version 4 >>>0x4 lelong <4 >>>>0x17 byte &0x2 WIP1Timing >>>0x17 byte &0x4 Left+Right >>>0x17 byte &0x8 VolumeEnvX >>>0x17 byte &0x10 FakeMute >>>0x17 byte &0x20 SyncSound # New flag as of version 4 >>>0x4 lelong >3 >>>>0x17 byte &0x80 NoCPUShutdown >>0x4 lelong <4 >>>0x18 lelong >0x23 >>>>0x20 leshort !0 >>>>>0x20 lestring16 x \b, metadata: "%s" >>0x4 lelong >3 >>>0x24 byte >0 \b, port 1: >>>>0x24 byte 1 joypad >>>>0x24 byte 2 mouse >>>>0x24 byte 3 SuperScope >>>>0x24 byte 4 Justifier >>>>0x24 byte 5 multitap >>>0x24 byte >0 \b, port 2: >>>>0x25 byte 1 joypad >>>>0x25 byte 2 mouse >>>>0x25 byte 3 SuperScope >>>>0x25 byte 4 Justifier >>>>0x25 byte 5 multitap >>>0x18 lelong >0x43 >>>>0x40 leshort !0 >>>>>0x40 lestring16 x \b, metadata: "%s" >>0x17 byte &0x40 \b, ROM: >>>(0x18.l-26) lelong x CRC32 0x%08x >>>(0x18.l-23) string x "%s" # Type: scummVM savegame files # From: Sven Hartge 0 string SCVM ScummVM savegame >12 string >\0 "%s" diff --git a/contrib/file/magic/Magdir/dyadic b/contrib/file/magic/Magdir/dyadic index 18f18bcf178e..ab7346586eab 100644 --- a/contrib/file/magic/Magdir/dyadic +++ b/contrib/file/magic/Magdir/dyadic @@ -1,56 +1,61 @@ #------------------------------------------------------------------------------ -# $File: dyadic,v 1.6 2014/06/01 19:14:42 christos Exp $ +# $File: dyadic,v 1.7 2015/05/27 18:02:48 christos Exp $ # Dyadic: file(1) magic for Dyalog APL. # # updated by Joerg Jenderek at Oct 2013 # http://en.wikipedia.org/wiki/Dyalog_APL # http://www.dyalog.com/ # .DXV Dyalog APL External Variable # .DIN Dyalog APL Input Table # .DOT Dyalog APL Output Table # .DFT Dyalog APL Format File 0 ubeshort&0xFF60 0xaa00 # skip biblio.dbt >1 byte !4 # real Dyalog APL have non zero version numbers like 7.3 or 13.4 >>2 ubeshort >0x0000 Dyalog APL >>>1 byte 0x00 aplcore #>>>1 byte 0x00 incomplete workspace # *.DCF Dyalog APL Component File >>>1 byte 0x01 component file 32-bit non-journaled non-checksummed #>>>1 byte 0x01 component file >>>1 byte 0x02 external variable exclusive #>>>1 byte 0x02 external variable # *.DWS Dyalog APL Workspace >>>1 byte 0x03 workspace >>>>7 byte&0x28 0x00 32-bit >>>>7 byte&0x28 0x20 64-bit >>>>7 byte&0x0c 0x00 classic >>>>7 byte&0x0c 0x04 unicode >>>>7 byte&0x88 0x00 big-endian >>>>7 byte&0x88 0x80 little-endian >>>1 byte 0x06 external variable shared # *.DSE Dyalog APL Session , *.DLF Dyalog APL Session Log File >>>1 byte 0x07 session >>>1 byte 0x08 mapped file 32-bit >>>1 byte 0x09 component file 64-bit non-journaled non-checksummed >>>1 byte 0x0a mapped file 64-bit >>>1 byte 0x0b component file 32-bit level 1 journaled non-checksummed >>>1 byte 0x0c component file 64-bit level 1 journaled non-checksummed >>>1 byte 0x0d component file 32-bit level 1 journaled checksummed >>>1 byte 0x0e component file 64-bit level 1 journaled checksummed >>>1 byte 0x0f component file 32-bit level 2 journaled checksummed >>>1 byte 0x10 component file 64-bit level 2 journaled checksummed >>>1 byte 0x11 component file 32-bit level 3 journaled checksummed >>>1 byte 0x12 component file 64-bit level 3 journaled checksummed >>>1 byte 0x13 component file 32-bit non-journaled checksummed >>>1 byte 0x14 component file 64-bit non-journaled checksummed +>>>1 byte 0x15 component file under construction +>>>1 byte 0x16 DFS component file 64-bit level 1 journaled checksummed +>>>1 byte 0x17 DFS component file 64-bit level 2 journaled checksummed +>>>1 byte 0x18 DFS component file 64-bit level 3 journaled checksummed +>>>1 byte 0x19 external workspace >>>1 byte 0x80 DDB >>>2 byte x version %d >>>3 byte x \b.%d #>>>2 byte x type %d #>>>3 byte x subtype %d # *.DXF Dyalog APL Transfer File 0 short 0x6060 Dyalog APL transfer diff --git a/contrib/file/magic/Magdir/filesystems b/contrib/file/magic/Magdir/filesystems index 939a0920c929..d8a802a31ee4 100644 --- a/contrib/file/magic/Magdir/filesystems +++ b/contrib/file/magic/Magdir/filesystems @@ -1,2345 +1,2346 @@ #------------------------------------------------------------------------------ -# $File: filesystems,v 1.108 2015/01/01 17:43:47 christos Exp $ +# $File: filesystems,v 1.109 2015/02/22 01:22:54 christos Exp $ # filesystems: file(1) magic for different filesystems # 0 name partid >0 ubyte 0x00 Unused >0 ubyte 0x01 12-bit FAT >0 ubyte 0x02 XENIX / >0 ubyte 0x03 XENIX /usr >0 ubyte 0x04 16-bit FAT, less than 32M >0 ubyte 0x05 extended partition >0 ubyte 0x06 16-bit FAT, more than 32M >0 ubyte 0x07 OS/2 HPFS, NTFS, QNX2, Adv. UNIX >0 ubyte 0x08 AIX or os, or etc. >0 ubyte 0x09 AIX boot partition or Coherent >0 ubyte 0x0a O/2 boot manager or Coherent swap >0 ubyte 0x0b 32-bit FAT >0 ubyte 0x0c 32-bit FAT, LBA-mapped >0 ubyte 0x0d 7XXX, LBA-mapped >0 ubyte 0x0e 16-bit FAT, LBA-mapped >0 ubyte 0x0f extended partition, LBA-mapped >0 ubyte 0x10 OPUS >0 ubyte 0x11 OS/2 DOS 12-bit FAT >0 ubyte 0x12 Compaq diagnostics >0 ubyte 0x14 OS/2 DOS 16-bit FAT <32M >0 ubyte 0x16 OS/2 DOS 16-bit FAT >=32M >0 ubyte 0x17 OS/2 hidden IFS >0 ubyte 0x18 AST Windows swapfile >0 ubyte 0x19 Willowtech Photon coS >0 ubyte 0x1b hidden win95 fat 32 >0 ubyte 0x1c hidden win95 fat 32 lba >0 ubyte 0x1d hidden win95 fat 16 lba >0 ubyte 0x20 Willowsoft OFS1 >0 ubyte 0x21 reserved >0 ubyte 0x23 reserved >0 ubyte 0x24 NEC DOS >0 ubyte 0x26 reserved >0 ubyte 0x31 reserved >0 ubyte 0x32 Alien Internet Services NOS >0 ubyte 0x33 reserved >0 ubyte 0x34 reserved >0 ubyte 0x35 JFS on OS2 >0 ubyte 0x36 reserved >0 ubyte 0x38 Theos >0 ubyte 0x39 Plan 9, or Theos spanned >0 ubyte 0x3a Theos ver 4 4gb partition >0 ubyte 0x3b Theos ve 4 extended partition >0 ubyte 0x3c PartitionMagic recovery >0 ubyte 0x3d Hidden Netware >0 ubyte 0x40 VENIX 286 or LynxOS >0 ubyte 0x41 PReP >0 ubyte 0x42 linux swap sharing DRDOS disk >0 ubyte 0x43 linux sharing DRDOS disk >0 ubyte 0x44 GoBack change utility >0 ubyte 0x45 Boot US Boot manager >0 ubyte 0x46 EUMEL/Elan or Ergos 3 >0 ubyte 0x47 EUMEL/Elan or Ergos 3 >0 ubyte 0x48 EUMEL/Elan or Ergos 3 >0 ubyte 0x4a ALFX/THIN filesystem for DOS >0 ubyte 0x4c Oberon partition >0 ubyte 0x4d QNX4.x >0 ubyte 0x4e QNX4.x 2nd part >0 ubyte 0x4f QNX4.x 3rd part >0 ubyte 0x50 DM (disk manager) >0 ubyte 0x51 DM6 Aux1 (or Novell) >0 ubyte 0x52 CP/M or Microport SysV/AT >0 ubyte 0x53 DM6 Aux3 >0 ubyte 0x54 DM6 DDO >0 ubyte 0x55 EZ-Drive (disk manager) >0 ubyte 0x56 Golden Bow (disk manager) >0 ubyte 0x57 Drive PRO >0 ubyte 0x5c Priam Edisk (disk manager) >0 ubyte 0x61 SpeedStor >0 ubyte 0x63 GNU HURD or Mach or Sys V/386 >0 ubyte 0x64 Novell Netware 2.xx or Speedstore >0 ubyte 0x65 Novell Netware 3.xx >0 ubyte 0x66 Novell 386 Netware >0 ubyte 0x67 Novell >0 ubyte 0x68 Novell >0 ubyte 0x69 Novell >0 ubyte 0x70 DiskSecure Multi-Boot >0 ubyte 0x71 reserved >0 ubyte 0x73 reserved >0 ubyte 0x74 reserved >0 ubyte 0x75 PC/IX >0 ubyte 0x76 reserved >0 ubyte 0x77 M2FS/M2CS partition >0 ubyte 0x78 XOSL boot loader filesystem >0 ubyte 0x80 MINIX until 1.4a >0 ubyte 0x81 MINIX since 1.4b >0 ubyte 0x82 Linux swap or Solaris >0 ubyte 0x83 Linux native >0 ubyte 0x84 OS/2 hidden C: drive >0 ubyte 0x85 Linux extended partition >0 ubyte 0x86 NT FAT volume set >0 ubyte 0x87 NTFS volume set or HPFS mirrored >0 ubyte 0x8a Linux Kernel AiR-BOOT partition >0 ubyte 0x8b Legacy Fault tolerant FAT32 >0 ubyte 0x8c Legacy Fault tolerant FAT32 ext >0 ubyte 0x8d Hidden free FDISK FAT12 >0 ubyte 0x8e Linux Logical Volume Manager >0 ubyte 0x90 Hidden free FDISK FAT16 >0 ubyte 0x91 Hidden free FDISK DOS EXT >0 ubyte 0x92 Hidden free FDISK FAT16 Big >0 ubyte 0x93 Amoeba filesystem >0 ubyte 0x94 Amoeba bad block table >0 ubyte 0x95 MIT EXOPC native partitions >0 ubyte 0x97 Hidden free FDISK FAT32 >0 ubyte 0x98 Datalight ROM-DOS Super-Boot >0 ubyte 0x99 Mylex EISA SCSI >0 ubyte 0x9a Hidden free FDISK FAT16 LBA >0 ubyte 0x9b Hidden free FDISK EXT LBA >0 ubyte 0x9f BSDI? >0 ubyte 0xa0 IBM Thinkpad hibernation >0 ubyte 0xa1 HP Volume expansion (SpeedStor) >0 ubyte 0xa3 HP Volume expansion (SpeedStor) >0 ubyte 0xa4 HP Volume expansion (SpeedStor) >0 ubyte 0xa5 386BSD partition type >0 ubyte 0xa6 OpenBSD partition type >0 ubyte 0xa7 NeXTSTEP 486 >0 ubyte 0xa8 Apple UFS >0 ubyte 0xa9 NetBSD partition type >0 ubyte 0xaa Olivetty Fat12 1.44MB Service part >0 ubyte 0xab Apple Boot >0 ubyte 0xae SHAG OS filesystem >0 ubyte 0xaf Apple HFS >0 ubyte 0xb0 BootStar Dummy >0 ubyte 0xb1 reserved >0 ubyte 0xb3 reserved >0 ubyte 0xb4 reserved >0 ubyte 0xb6 reserved >0 ubyte 0xb7 BSDI BSD/386 filesystem >0 ubyte 0xb8 BSDI BSD/386 swap >0 ubyte 0xbb Boot Wizard Hidden >0 ubyte 0xbe Solaris 8 partition type >0 ubyte 0xbf Solaris partition type >0 ubyte 0xc0 CTOS >0 ubyte 0xc1 DRDOS/sec (FAT-12) >0 ubyte 0xc2 Hidden Linux >0 ubyte 0xc3 Hidden Linux swap >0 ubyte 0xc4 DRDOS/sec (FAT-16, < 32M) >0 ubyte 0xc5 DRDOS/sec (EXT) >0 ubyte 0xc6 DRDOS/sec (FAT-16, >= 32M) >0 ubyte 0xc7 Syrinx (Cyrnix?) or HPFS disabled >0 ubyte 0xc8 Reserved for DR-DOS 8.0+ >0 ubyte 0xc9 Reserved for DR-DOS 8.0+ >0 ubyte 0xca Reserved for DR-DOS 8.0+ >0 ubyte 0xcb DR-DOS 7.04+ Secured FAT32 CHS >0 ubyte 0xcc DR-DOS 7.04+ Secured FAT32 LBA >0 ubyte 0xcd CTOS Memdump >0 ubyte 0xce DR-DOS 7.04+ FAT16X LBA >0 ubyte 0xcf DR-DOS 7.04+ EXT LBA >0 ubyte 0xd0 REAL/32 secure big partition >0 ubyte 0xd1 Old Multiuser DOS FAT12 >0 ubyte 0xd4 Old Multiuser DOS FAT16 Small >0 ubyte 0xd5 Old Multiuser DOS Extended >0 ubyte 0xd6 Old Multiuser DOS FAT16 Big >0 ubyte 0xd8 CP/M 86 >0 ubyte 0xdb CP/M or Concurrent CP/M >0 ubyte 0xdd Hidden CTOS Memdump >0 ubyte 0xde Dell PowerEdge Server utilities >0 ubyte 0xdf DG/UX virtual disk manager >0 ubyte 0xe0 STMicroelectronics ST AVFS >0 ubyte 0xe1 DOS access or SpeedStor 12-bit >0 ubyte 0xe3 DOS R/O or Storage Dimensions >0 ubyte 0xe4 SpeedStor 16-bit FAT < 1024 cyl. >0 ubyte 0xe5 reserved >0 ubyte 0xe6 reserved >0 ubyte 0xeb BeOS >0 ubyte 0xee GPT Protective MBR >0 ubyte 0xef EFI system partition >0 ubyte 0xf0 Linux PA-RISC boot loader >0 ubyte 0xf1 SpeedStor or Storage Dimensions >0 ubyte 0xf2 DOS 3.3+ Secondary >0 ubyte 0xf3 reserved >0 ubyte 0xf4 SpeedStor large partition >0 ubyte 0xf5 Prologue multi-volumen partition >0 ubyte 0xf6 reserved >0 ubyte 0xf9 pCache: ext2/ext3 persistent cache >0 ubyte 0xfa Bochs x86 emulator >0 ubyte 0xfb VMware File System >0 ubyte 0xfc VMware Swap >0 ubyte 0xfd Linux RAID partition persistent sb >0 ubyte 0xfe LANstep or IBM PS/2 IML >0 ubyte 0xff Xenix Bad Block Table 0 string \366\366\366\366 PC formatted floppy with no filesystem # Sun disk labels # From /usr/include/sun/dklabel.h: 0774 beshort 0xdabe # modified by Joerg Jenderek, because original test # succeeds for Cabinet archive dao360.dl_ with negative blocks >0770 long >0 Sun disk label >>0 string x '%s >>>31 string >\0 \b%s >>>>63 string >\0 \b%s >>>>>95 string >\0 \b%s >>0 string x \b' >>0734 short >0 %d rpm, >>0736 short >0 %d phys cys, >>0740 short >0 %d alts/cyl, >>0746 short >0 %d interleave, >>0750 short >0 %d data cyls, >>0752 short >0 %d alt cyls, >>0754 short >0 %d heads/partition, >>0756 short >0 %d sectors/track, >>0764 long >0 start cyl %d, >>0770 long x %d blocks # Is there a boot block written 1 sector in? >512 belong&077777777 0600407 \b, boot block present # Joerg Jenderek: Smart Boot Manager backup file is 25 (MSDOS) or 41 (LINUX) byte header + first sectors of disk # (http://btmgr.sourceforge.net/docs/user-guide-3.html) 0 string SBMBAKUP_ Smart Boot Manager backup file >9 string x \b, version %-5.5s >>14 string =_ >>>15 string x %-.1s >>>>16 string =_ \b. >>>>>17 string x \b%-.1s >>>>>>18 string =_ \b. >>>>>>>19 string x \b%-.1s >>>22 ubyte 0 >>>>21 ubyte x \b, from drive 0x%x >>>22 ubyte >0 >>>>21 string x \b, from drive %s >>>535 search/17 \x55\xAA >>>>&-512 indirect x \b; contains # updated by Joerg Jenderek at Nov 2012 # DOS Emulator image is 128 byte, null right padded header + harddisc image 0 string DOSEMU\0 >0x27E leshort 0xAA55 #offset is 128 >>19 ubyte 128 >>>(19.b-1) ubyte 0x0 DOS Emulator image >>>>7 ulelong >0 \b, %u heads >>>>11 ulelong >0 \b, %d sectors/track >>>>15 ulelong >0 \b, %d cylinders >>>>128 indirect x \b; contains # added by Joerg Jenderek at Nov 2012 # http://www.thenakedpc.com/articles/v04/08/0408-05.html # Symantec (Peter Norton) Image.dat file consists of variable header, bootrecord, part of FAT and root directory data 0 string PNCIHISK\0 Norton Utilities disc image data # real x86 boot sector with jump instruction >509 search/1026 \x55\xAA\xeb >>&-1 indirect x \b; contains # http://file-extension.net/seeker/file_extension_dat 0 string PNCIUNDO Norton Disk Doctor UnDo file # # DOS/MBR boot sector updated by Joerg Jenderek at Sep 2007,May 2011,2013 # for any allowed sector sizes 30 search/481 \x55\xAA # to display DOS/MBR boot sector (40) before old one (strength=50+21),Syslinux bootloader (71),SYSLINUX MBR (37+36),NetBSD mbr (110),AdvanceMAME mbr (111) # DOS BPB information (70) and after DOS floppy (120) like in previous file version !:strength +65 # for sector sizes < 512 Bytes >11 uleshort <512 >>(11.s-2) uleshort 0xAA55 DOS/MBR boot sector # for sector sizes with 512 or more Bytes >0x1FE leshort 0xAA55 DOS/MBR boot sector # keep old DOS/MBR boot sector as dummy for mbr and bootloader displaying # only for sector sizes with 512 or more Bytes 0x1FE leshort 0xAA55 DOS/MBR boot sector # # to display information (50) before DOS BPB (strength=70) and after DOS floppy (120) like in old file version !:strength +65 >2 string OSBS OS/BS MBR # added by Joerg Jenderek at Feb 2013 according to http://thestarman.pcministry.com/asm/mbr/ # and http://en.wikipedia.org/wiki/Master_Boot_Record # test for nearly all MS-DOS Master Boot Record initial program loader (IPL) is now done by # characteristic assembler instructions: xor ax,ax;mov ss,ax;mov sp,7c00 >0 search/2 \x33\xc0\x8e\xd0\xbc\x00\x7c MS-MBR # Microsoft Windows 95A and early ( http://thestarman.pcministry.com/asm/mbr/STDMBR.htm ) # assembler instructions: mov si,sp;push ax;pop es;push ax;pop ds;sti;cld >>8 ubequad 0x8bf45007501ffbfc # http://thestarman.pcministry.com/asm/mbr/200MBR.htm >>>0x16 ubyte 0xF3 \b,DOS 2 >>>>219 regex Author\ -\ Author: # found "David Litton" , "A Pehrsson " >>>>>&0 string x "%s" >>>0x16 ubyte 0xF2 # NEC MS-DOS 3.30 Rev. 3 . See http://thestarman.pcministry.com/asm/mbr/DOS33MBR.htm # assembler instructions: mov di,077c;cmp word ptrl[di],a55a;jnz >>>>0x22 ubequad 0xbf7c07813d5aa575 \b,NEC 3.3 # version MS-DOS 3.30 til MS-Windows 95A (WinVer=4.00.1111) >>>>0x22 default x \b,D0S version 3.3-7.0 # error messages are printed by assembler instructions: mov si,06nn;...;int 10 (0xBEnn06;...) # where nn is string offset varying for different languages # "Invalid partition table" nn=0x8b for english version >>>>>(0x49.b) string Invalid\ partition\ table english >>>>>(0x49.b) string Ung\201ltige\ Partitionstabelle german >>>>>(0x49.b) string Table\ de\ partition\ invalide french >>>>>(0x49.b) string Tabela\ de\ parti\207ao\ inv\240lida portuguese >>>>>(0x49.b) string Tabla\ de\ partici\242n\ no\ v\240lida spanish >>>>>(0x49.b) string Tavola\ delle\ partizioni\ non\ valida italian >>>>>0x49 ubyte >0 at offset 0x%x >>>>>>(0x49.b) string >\0 "%s" # "Error loading operating system" nn=0xa3 for english version # "Fehler beim Laden des Betriebssystems" nn=0xa7 for german version # "Erreur en chargeant syst\212me d'exploitation" nn=0xa7 for french version # "Erro na inicializa\207ao do sistema operacional" nn=0xa7 for portuguese Brazilian version # "Error al cargar sistema operativo" nn=0xa8 for spanish version # "Errore durante il caricamento del sistema operativo" nn=0xae for italian version >>>>>0x74 ubyte >0 at offset 0x%x >>>>>>(0x74.b) string >\0 "%s" # "Missing operating system" nn=0xc2 for english version # "Betriebssystem fehlt" nn=0xcd for german version # "Syst\212me d'exploitation absent" nn=0xd2 for french version # "Sistema operacional nao encontrado" nn=0xd4 for portuguese Brazilian version # "Falta sistema operativo" nn=0xca for spanish version # "Sistema operativo mancante" nn=0xe2 for italian version >>>>>0x79 ubyte >0 at offset 0x%x >>>>>>(0x79.b) string >\0 "%s" # Microsoft Windows 95B to XP (http://thestarman.pcministry.com/asm/mbr/95BMEMBR.htm) # assembler instructions: push ax;pop es;push ax;pop ds;cld;mov si,7c1b >>8 ubequad 0x5007501ffcbe1b7c # assembler instructions: rep;movsb;retf;mov si,07be;mov cl,04 >>>24 ubequad 0xf3a4cbbebe07b104 9M # "Invalid partition table" nn=0x10F for english version # "Ung\201ltige Partitionstabelle" nn=0x10F for german version # "Table de partition erron\202e" nn=0x10F for french version # "\216\257\245\340\240\346\250\256\255\255\240\357 \341\250\341\342\245\254\240 \255\245 \255\240\251\244\245\255\240" nn=0x10F for russian version >>>>(0x3C.b+0x0FF) string Invalid\ partition\ table english >>>>(0x3C.b+0x0FF) string Ung\201ltige\ Partitionstabelle german >>>>(0x3C.b+0x0FF) string Table\ de\ partition\ erron\202e french >>>>(0x3C.b+0x0FF) string \215\245\257\340\240\242\250\253\354\255\240\357\ \342\240\241\253\250\346\240 russian >>>>0x3C ubyte x at offset 0x%x+0xFF >>>>(0x3C.b+0x0FF) string >\0 "%s" # "Error loading operating system" nn=0x127 for english version # "Fehler beim Laden des Betriebssystems" nn=0x12b for german version # "Erreur lors du chargement du syst\212me d'exploitation" nn=0x12a for french version # "\216\350\250\241\252\240 \257\340\250 \247\240\243\340\343\247\252\245 \256\257\245\340\240\346\250\256\255\255\256\251 \341\250\341\342\245\254\353" nn=0x12d for russian version >>>>0xBD ubyte x at offset 0x1%x >>>>(0xBD.b+0x100) string >\0 "%s" # "Missing operating system" nn=0x146 for english version # "Betriebssystem fehlt" nn=0x151 for german version # "Syst\212me d'exploitation manquant" nn=0x15e for french version # "\216\257\245\340\240\346\250\256\255\255\240\357 \341\250\341\342\245\254\240 \255\245 \255\240\251\244\245\255\240" nn=0x156 for russian version >>>>0xA9 ubyte x at offset 0x1%x >>>>(0xA9.b+0x100) string >\0 "%s" # http://thestarman.pcministry.com/asm/mbr/Win2kmbr.htm # assembler instructions: rep;movsb;retf;mov BP,07be;mov cl,04 >>>24 ubequad 0xf3a4cbbdbe07b104 XP # where xxyyzz are lower bits from offsets of error messages varying for different languages >>>>0x1B4 ubelong&0x00FFFFFF 0x002c4463 english >>>>0x1B4 ubelong&0x00FFFFFF 0x002c486e german # "Invalid partition table" xx=0x12C for english version # "Ung\201ltige Partitionstabelle" xx=0x12C for german version >>>>0x1b5 ubyte >0 at offset 0x1%x >>>>(0x1b5.b+0x100) string >\0 "%s" # "Error loading operating system" yy=0x144 for english version # "Fehler beim Laden des Betriebssystems" yy=0x148 for german version >>>>0x1b6 ubyte >0 at offset 0x1%x >>>>(0x1b6.b+0x100) string >\0 "%s" # "Missing operating system" zz=0x163 for english version # "Betriebssystem nicht vorhanden" zz=0x16e for german version >>>>0x1b7 ubyte >0 at offset 0x1%x >>>>(0x1b7.b+0x100) string >\0 "%s" # Microsoft Windows Vista or 7 # assembler instructions: ..;mov ds,ax;mov si,7c00;mov di,..00 >>8 ubequad 0xc08ed8be007cbf00 # Microsoft Windows Vista (http://thestarman.pcministry.com/asm/mbr/VistaMBR.htm) # assembler instructions: jnz 0729;cmp ebx,"TCPA" >>>0xEC ubequad 0x753b6681fb544350 Vista # where xxyyzz are lower bits from offsets of error messages varying for different languages >>>>0x1B4 ubelong&0x00FFFFFF 0x00627a99 english #>>>>0x1B4 ubelong&0x00FFFFFF ? german # "Invalid partition table" xx=0x162 for english version # "Ung\201ltige Partitionstabelle" xx=0x1?? for german version >>>>0x1b5 ubyte >0 at offset 0x1%x >>>>(0x1b5.b+0x100) string >\0 "%s" # "Error loading operating system" yy=0x17a for english version # "Fehler beim Laden des Betriebssystems" yy= 0x1?? for german version >>>>0x1b6 ubyte >0 at offset 0x1%x >>>>(0x1b6.b+0x100) string >\0 "%s" # "Missing operating system" zz=0x199 for english version # "Betriebssystem nicht vorhanden" zz=0x1?? for german version >>>>0x1b7 ubyte >0 at offset 0x1%x >>>>(0x1b7.b+0x100) string >\0 "%s" # Microsoft Windows 7 (http://thestarman.pcministry.com/asm/mbr/W7MBR.htm) # assembler instructions: cmp ebx,"TCPA";cmp >>>0xEC ubequad 0x6681fb5443504175 Windows 7 # where xxyyzz are lower bits from offsets of error messages varying for different languages >>>>0x1B4 ubelong&0x00FFFFFF 0x00637b9a english #>>>>0x1B4 ubelong&0x00FFFFFF ? german # "Invalid partition table" xx=0x163 for english version # "Ung\201ltige Partitionstabelle" xx=0x1?? for german version >>>>0x1b5 ubyte >0 at offset 0x1%x >>>>(0x1b5.b+0x100) string >\0 "%s" # "Error loading operating system" yy=0x17b for english version # "Fehler beim Laden des Betriebssystems" yy=0x1?? for german version >>>>0x1b6 ubyte >0 at offset 0x1%x >>>>(0x1b6.b+0x100) string >\0 "%s" # "Missing operating system" zz=0x19a for english version # "Betriebssystem nicht vorhanden" zz=0x1?? for german version >>>>0x1b7 ubyte >0 at offset 0x1%x >>>>(0x1b7.b+0x100) string >\0 "%s" # http://thestarman.pcministry.com/asm/mbr/Win2kmbr.htm#DiskSigs # http://en.wikipedia.org/wiki/MBR_disk_signature#ID >>0x1b8 ulelong >0 \b, disk signature 0x%-.4x # driveID/timestamp for Win 95B,98,98SE and ME. See http://thestarman.pcministry.com/asm/mbr/mystery.htm >>0xDA uleshort 0 >>>0xDC ulelong >0 \b, created # physical drive number (0x80-0xFF) when the Windows wrote that byte to the drive >>>>0xDC ubyte x with driveID 0x%x # hours, minutes and seconds >>>>0xDf ubyte x at %x >>>>0xDe ubyte x \b:%x >>>>0xDd ubyte x \b:%x # special case for Microsoft MS-DOS 3.21 spanish # assembler instructions: cli;mov $0x30,%ax;mov %ax,%ss;mov >0 ubequad 0xfab830008ed0bc00 # assembler instructions: $0x1f00,%sp;mov $0x80cb,%di;add %cl,(%bx,%si);in (%dx),%ax;mov >>8 ubequad 0x1fbfcb800008ed8 MS-MBR,D0S version 3.21 spanish # Microsoft MBR IPL end # dr-dos with some upper-, lowercase variants >0x9D string Invalid\ partition\ table$ >>181 string No\ Operating\ System$ >>>201 string Operating\ System\ load\ error$ \b, DR-DOS MBR, Version 7.01 to 7.03 >0x9D string Invalid\ partition\ table$ >>181 string No\ operating\ system$ >>>201 string Operating\ system\ load\ error$ \b, DR-DOS MBR, Version 7.01 to 7.03 >342 string Invalid\ partition\ table$ >>366 string No\ operating\ system$ >>>386 string Operating\ system\ load\ error$ \b, DR-DOS MBR, version 7.01 to 7.03 >295 string NEWLDR\0 >>302 string Bad\ PT\ $ >>>310 string No\ OS\ $ >>>>317 string OS\ load\ err$ >>>>>329 string Moved\ or\ missing\ IBMBIO.LDR\n\r >>>>>>358 string Press\ any\ key\ to\ continue.\n\r$ >>>>>>>387 string Copyright\ (c)\ 1984,1998 >>>>>>>>411 string Caldera\ Inc.\0 \b, DR-DOS MBR (IBMBIO.LDR) # # tests for different MS-DOS Master Boot Records (MBR) moved and merged # #>0x145 string Default:\ F \b, FREE-DOS MBR #>0x14B string Default:\ F \b, FREE-DOS 1.0 MBR >0x145 search/7 Default:\ F \b, FREE-DOS MBR #>>313 string F0\ .\ .\ . #>>>322 string disk\ 1 #>>>>382 string FAT3 >64 string no\ active\ partition\ found >>96 string read\ error\ while\ reading\ drive \b, FREE-DOS Beta 0.9 MBR # Ranish Partition Manager http://www.ranish.com/part/ >387 search/4 \0\ Error!\r >>378 search/7 Virus! >>>397 search/4 Booting\ >>>>408 search/4 HD1/\0 \b, Ranish MBR ( >>>>>416 string Writing\ changes... \b2.37 >>>>>>438 ubyte x \b,0x%x dots >>>>>>440 ubyte >0 \b,virus check >>>>>>441 ubyte >0 \b,partition %c #2.38,2.42,2.44 >>>>>416 string !Writing\ changes... \b >>>>>>418 ubyte 1 \bvirus check, >>>>>>419 ubyte x \b0x%x seconds >>>>>>420 ubyte&0x0F >0 \b,partition >>>>>>>420 ubyte&0x0F <5 \b %x >>>>>>>420 ubyte&0x0F 0Xf \b ask >>>>>420 ubyte x \b) # # SYSLINUX MBR moved # http://www.acronis.de/ >362 string MBR\ Error\ \0\r >>376 string ress\ any\ key\ to\ >>>392 string boot\ from\ floppy...\0 \b, Acronis MBR # added by Joerg Jenderek # http://www.visopsys.org/ # http://partitionlogic.org.uk/ >309 string No\ bootable\ partition\ found\r >>339 string I/O\ Error\ reading\ boot\ sector\r \b, Visopsys MBR >349 string No\ bootable\ partition\ found\r >>379 string I/O\ Error\ reading\ boot\ sector\r \b, simple Visopsys MBR # bootloader, bootmanager >0x40 string SBML # label with 11 characters of FAT 12 bit filesystem >>43 string SMART\ BTMGR >>>430 string SBMK\ Bad!\r \b, Smart Boot Manager # OEM-ID not always "SBM" #>>>>3 strings SBM >>>>6 string >\0 \b, version %s >382 string XOSLLOADXCF \b, eXtended Operating System Loader >6 string LILO \b, LInux i386 boot LOader >>120 string LILO \b, version 22.3.4 SuSe >>172 string LILO \b, version 22.5.8 Debian # updated by Joerg Jenderek at Oct 2008 # variables according to grub-0.97/stage1/stage1.S or # http://www.gnu.org/software/grub/manual/grub.html#Embedded-data # usual values are marked with comments to get only informations of strange GRUB loaders >342 search/60 \0Geom\0 #>0 ulelong x %x=0x009048EB , 0x2a9048EB 0 >>0x41 ubyte <2 >>>0x3E ubyte >2 \b; GRand Unified Bootloader # 0x3 for 0.5.95,0.93,0.94,0.96 0x4 for 1.90 >>>>0x3E ubyte x \b, stage1 version 0x%x #If it is 0xFF, use a drive passed by BIOS >>>>0x40 ubyte <0xFF \b, boot drive 0x%x # in most case 0,1,0x2e for GRUB 0.5.95 >>>>0x41 ubyte >0 \b, LBA flag 0x%x >>>>0x42 uleshort <0x8000 \b, stage2 address 0x%x #>>>>0x42 uleshort =0x8000 \b, stage2 address 0x%x (usual) >>>>0x42 uleshort >0x8000 \b, stage2 address 0x%x #>>>>0x44 ulelong =1 \b, 1st sector stage2 0x%x (default) >>>>0x44 ulelong >1 \b, 1st sector stage2 0x%x >>>>0x48 uleshort <0x800 \b, stage2 segment 0x%x #>>>>0x48 uleshort =0x800 \b, stage2 segment 0x%x (usual) >>>>0x48 uleshort >0x800 \b, stage2 segment 0x%x >>>>402 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>>394 string stage1 \b, GRUB version 0.5.95 >>>>382 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>>376 string GRUB\ \0 \b, GRUB version 0.93 or 1.94 >>>>383 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>>377 string GRUB\ \0 \b, GRUB version 0.94 >>>>385 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>>379 string GRUB\ \0 \b, GRUB version 0.95 or 0.96 >>>>391 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>>385 string GRUB\ \0 \b, GRUB version 0.97 # unknown version >>>343 string Geom\0Read\0\ Error\0 >>>>321 string Loading\ stage1.5 \b, GRUB version x.y >>>380 string Geom\0Hard\ Disk\0Read\0\ Error\0 >>>>374 string GRUB\ \0 \b, GRUB version n.m # SYSLINUX bootloader moved >395 string chksum\0\ ERROR!\0 \b, Gujin bootloader # http://www.bcdwb.de/bcdw/index_e.htm >3 string BCDL >>498 string BCDL\ \ \ \ BIN \b, Bootable CD Loader (1.50Z) # mbr partition table entries updated by Joerg Jenderek at Sep 2013 # skip Norton Utilities disc image data >3 string !IHISK # skip Linux style boot sector starting with assember instructions mov 0x7c0,ax; >>0 belong !0xb8c0078e # not Linux kernel >>>514 string !HdrS # not BeOS >>>>422 string !Be\ Boot\ Loader >>>>>32769 string CD001 >>>>>>0 use cdrom # jump over BPB instruction implies DOS bootsector or AdvanceMAME mbr >>>>>0 ubelong&0xFD000000 =0xE9000000 # AdvanceMAME mbr >>>>>>(1.b+2) ubequad 0xfa31c08ed88ec08e >>>>>>>446 use partition-table # mbr, Norton Utilities disc image data, or 2nd,etc. sector of x86 bootloader >>>>>0 ubelong&0xFD000000 !0xE9000000 # skip FSInfosector >>>>>>0 string !RRaA # skip 3rd sector of MS x86 bootloader with assember instructions cli;MOVZX EAX,BYTE PTR [BP+10];MOV ECX, # http://thestarman.pcministry.com/asm/mbr/MSWIN41.htm >>>>>>>0 ubequad !0xfa660fb64610668b # skip 13rd sector of MS x86 bootloader >>>>>>>>0 ubequad !0x660fb64610668b4e # skip sector starting with DOS new line >>>>>>>>>0 string !\r\n # allowed active flag 0,80h-FFh >>>>>>>>>>446 ubyte 0 >>>>>>>>>>>446 use partition-table >>>>>>>>>>446 ubyte >0x7F >>>>>>>>>>>446 use partition-table # TODO: test for extended bootrecord (ebr) moved and merged with mbr partition table entries # mbr partition table entries end # http://www.acronis.de/ #FAT label=ACRONIS\ SZ #OEM-ID=BOOTWIZ0 >442 string Non-system\ disk,\ >>459 string press\ any\ key...\x7\0 \b, Acronis Startup Recovery Loader # updated by Joerg Jenderek at Nov 2012, Sep 2013 # DOS names like F11.SYS or BOOTWIZ.SYS are 8 right space padded bytes+3 bytes # display 1 space >>>447 ubyte x \b >>>477 use DOS-filename # >185 string FDBOOT\ Version\ >>204 string \rNo\ Systemdisk.\ >>>220 string Booting\ from\ harddisk.\n\r >>>245 string Cannot\ load\ from\ harddisk.\n\r >>>>273 string Insert\ Systemdisk\ >>>>>291 string and\ press\ any\ key.\n\r \b, FDBOOT harddisk Bootloader >>>>>>200 string >\0 \b, version %-3s >242 string Bootsector\ from\ C.H.\ Hochst\204 # http://freecode.com/projects/dosfstools dosfstools-n.m/src/mkdosfs.c # updated by Joerg Jenderek at Nov 2012. Use search directive with offset instead of string # skip name "C.H. Hochstaetter" partly because it is sometimes written without umlaut >242 search/127 Bootsector\ from\ C.H.\ Hochst >>278 search/127 No\ Systemdisk.\ Booting\ from\ harddisk # followed by variants with point,CR-NL or NL-CR >>>208 search/261 Cannot\ load\ from\ harddisk. # followed by variants CR-NL or NL-CR >>>>236 search/235 Insert\ Systemdisk\ and\ press\ any\ key. # followed by variants with point,CR-NL or NL-CR >>>>>180 search/96 Disk\ formatted\ with\ WinImage\ \b, WinImage harddisk Bootloader # followed by string like "6.50 (c) 1993-2004 Gilles Vollant" >>>>>>&0 string x \b, version %-4.4s >(1.b+2) ubyte 0xe >>(1.b+3) ubyte 0x1f >>>(1.b+4) ubyte 0xbe # message offset found at (1.b+5) is 0x77 for FAT32 or 0x5b for others >>>>(1.b+5) ubyte&0xd3 0x53 >>>>>(1.b+6) ubyte 0x7c # assembler instructions: lodsb;and al,al;jz 0xb;push si;mov ah, >>>>>>(1.b+7) ubyte 0xac >>>>>>>(1.b+8) ubyte 0x22 >>>>>>>>(1.b+9) ubyte 0xc0 >>>>>>>>>(1.b+10) ubyte 0x74 >>>>>>>>>>(1.b+11) ubyte 0x0b >>>>>>>>>>>(1.b+12) ubyte 0x56 >>>>>>>>>>>>(1.b+13) ubyte 0xb4 \b, mkdosfs boot message display # FAT1X version >>>>>>>>>>>>>(1.b+5) ubyte 0x5b >>>>>>>>>>>>>>0x5b string >\0 "%-s" # FAT32 version >>>>>>>>>>>>>(1.b+5) ubyte 0x77 >>>>>>>>>>>>>>0x77 string >\0 "%-s" >214 string Please\ try\ to\ install\ FreeDOS\ \b, DOS Emulator boot message display #>>244 string from\ dosemu-freedos-*-bin.tgz\r #>>>170 string Sorry,\ could\ not\ load\ an\ #>>>>195 string operating\ system.\r\n # >103 string This\ is\ not\ a\ bootable\ disk.\ >>132 string Please\ insert\ a\ bootable\ >>>157 string floppy\ and\r\n >>>>169 string press\ any\ key\ to\ try\ again...\r \b, FREE-DOS message display # >66 string Solaris\ Boot\ Sector >>99 string Incomplete\ MDBoot\ load. >>>89 string Version \b, Sun Solaris Bootloader >>>>97 byte x version %c # >408 string OS/2\ !!\ SYS01475\r\0 >>429 string OS/2\ !!\ SYS02025\r\0 >>>450 string OS/2\ !!\ SYS02027\r\0 >>>469 string OS2BOOT\ \ \ \ \b, IBM OS/2 Warp bootloader # >409 string OS/2\ !!\ SYS01475\r\0 >>430 string OS/2\ !!\ SYS02025\r\0 >>>451 string OS/2\ !!\ SYS02027\r\0 >>>470 string OS2BOOT\ \ \ \ \b, IBM OS/2 Warp Bootloader >112 string This\ disk\ is\ not\ bootable\r >>142 string If\ you\ wish\ to\ make\ it\ bootable >>>176 string run\ the\ DOS\ program\ SYS\ >>>200 string after\ the\r >>>>216 string system\ has\ been\ loaded\r\n >>>>>242 string Please\ insert\ a\ DOS\ diskette\ >>>>>271 string into\r\n\ the\ drive\ and\ >>>>>>292 string strike\ any\ key...\0 \b, IBM OS/2 Warp message display # XP >430 string NTLDR\ is\ missing\xFF\r\n >>449 string Disk\ error\xFF\r\n >>>462 string Press\ any\ key\ to\ restart\r \b, Microsoft Windows XP Bootloader # DOS names like NTLDR,CMLDR,$LDR$ are 8 right space padded bytes+3 bytes >>>>417 ubyte&0xDF >0 >>>>>417 string x %-.5s >>>>>>422 ubyte&0xDF >0 >>>>>>>422 string x \b%-.3s >>>>>425 ubyte&0xDF >0 >>>>>>425 string >\ \b.%-.3s # >>>>371 ubyte >0x20 >>>>>368 ubyte&0xDF >0 >>>>>>368 string x %-.5s >>>>>>>373 ubyte&0xDF >0 >>>>>>>>373 string x \b%-.3s >>>>>>376 ubyte&0xDF >0 >>>>>>>376 string x \b.%-.3s # >430 string NTLDR\ nicht\ gefunden\xFF\r\n >>453 string Datentr\204gerfehler\xFF\r\n >>>473 string Neustart\ mit\ beliebiger\ Taste\r \b, Microsoft Windows XP Bootloader (german) >>>>417 ubyte&0xDF >0 >>>>>417 string x %-.5s >>>>>>422 ubyte&0xDF >0 >>>>>>>422 string x \b%-.3s >>>>>425 ubyte&0xDF >0 >>>>>>425 string >\ \b.%-.3s # offset variant >>>>379 string \0 >>>>>368 ubyte&0xDF >0 >>>>>>368 string x %-.5s >>>>>>>373 ubyte&0xDF >0 >>>>>>>>373 string x \b%-.3s # >430 string NTLDR\ fehlt\xFF\r\n >>444 string Datentr\204gerfehler\xFF\r\n >>>464 string Neustart\ mit\ beliebiger\ Taste\r \b, Microsoft Windows XP Bootloader (2.german) >>>>417 ubyte&0xDF >0 >>>>>417 string x %-.5s >>>>>>422 ubyte&0xDF >0 >>>>>>>422 string x \b%-.3s >>>>>425 ubyte&0xDF >0 >>>>>>425 string >\ \b.%-.3s # variant >>>>371 ubyte >0x20 >>>>>368 ubyte&0xDF >0 >>>>>>368 string x %-.5s >>>>>>>373 ubyte&0xDF >0 >>>>>>>>373 string x \b%-.3s >>>>>>376 ubyte&0xDF >0 >>>>>>>376 string x \b.%-.3s # >430 string NTLDR\ fehlt\xFF\r\n >>444 string Medienfehler\xFF\r\n >>>459 string Neustart:\ Taste\ dr\201cken\r \b, Microsoft Windows XP Bootloader (3.german) >>>>371 ubyte >0x20 >>>>>368 ubyte&0xDF >0 >>>>>>368 string x %-.5s >>>>>>>373 ubyte&0xDF >0 >>>>>>>>373 string x \b%-.3s >>>>>>376 ubyte&0xDF >0 >>>>>>>376 string x \b.%-.3s # variant >>>>417 ubyte&0xDF >0 >>>>>417 string x %-.5s >>>>>>422 ubyte&0xDF >0 >>>>>>>422 string x \b%-.3s >>>>>425 ubyte&0xDF >0 >>>>>>425 string >\ \b.%-.3s # >430 string Datentr\204ger\ entfernen\xFF\r\n >>454 string Medienfehler\xFF\r\n >>>469 string Neustart:\ Taste\ dr\201cken\r \b, Microsoft Windows XP Bootloader (4.german) >>>>379 string \0 >>>>>368 ubyte&0xDF >0 >>>>>>368 string x %-.5s >>>>>>>373 ubyte&0xDF >0 >>>>>>>>373 string x \b%-.3s >>>>>>376 ubyte&0xDF >0 >>>>>>>376 string x \b.%-.3s # variant >>>>417 ubyte&0xDF >0 >>>>>417 string x %-.5s >>>>>>422 ubyte&0xDF >0 >>>>>>>422 string x \b%-.3s >>>>>425 ubyte&0xDF >0 >>>>>>425 string >\ \b.%-.3s # #>3 string NTFS\ \ \ \ >389 string Fehler\ beim\ Lesen\ >>407 string des\ Datentr\204gers >>>426 string NTLDR\ fehlt >>>>440 string NTLDR\ ist\ komprimiert >>>>>464 string Neustart\ mit\ Strg+Alt+Entf\r \b, Microsoft Windows XP Bootloader NTFS (german) #>3 string NTFS\ \ \ \ >313 string A\ disk\ read\ error\ occurred.\r >>345 string A\ kernel\ file\ is\ missing\ >>>370 string from\ the\ disk.\r >>>>484 string NTLDR\ is\ compressed >>>>>429 string Insert\ a\ system\ diskette\ >>>>>>454 string and\ restart\r\nthe\ system.\r \b, Microsoft Windows XP Bootloader NTFS # DOS loader variants different languages,offsets >472 ubyte&0xDF >0 >>389 string Invalid\ system\ disk\xFF\r\n >>>411 string Disk\ I/O\ error >>>>428 string Replace\ the\ disk,\ and\ >>>>>455 string press\ any\ key \b, Microsoft Windows 98 Bootloader #IO.SYS >>>>>>472 ubyte&0xDF >0 >>>>>>>472 string x \b %-.2s >>>>>>>>474 ubyte&0xDF >0 >>>>>>>>>474 string x \b%-.5s >>>>>>>>>>479 ubyte&0xDF >0 >>>>>>>>>>>479 string x \b%-.1s >>>>>>>480 ubyte&0xDF >0 >>>>>>>>480 string x \b.%-.3s #MSDOS.SYS >>>>>>>483 ubyte&0xDF >0 \b+ >>>>>>>>483 string x \b%-.5s >>>>>>>>>488 ubyte&0xDF >0 >>>>>>>>>>488 string x \b%-.3s >>>>>>>>491 ubyte&0xDF >0 >>>>>>>>>491 string x \b.%-.3s # >>390 string Invalid\ system\ disk\xFF\r\n >>>412 string Disk\ I/O\ error\xFF\r\n >>>>429 string Replace\ the\ disk,\ and\ >>>>>451 string then\ press\ any\ key\r \b, Microsoft Windows 98 Bootloader >>388 string Ungueltiges\ System\ \xFF\r\n >>>410 string E/A-Fehler\ \ \ \ \xFF\r\n >>>>427 string Datentraeger\ wechseln\ und\ >>>>>453 string Taste\ druecken\r \b, Microsoft Windows 95/98/ME Bootloader (german) #WINBOOT.SYS only not spaces (0xDF) >>>>>>497 ubyte&0xDF >0 >>>>>>>497 string x %-.5s >>>>>>>>502 ubyte&0xDF >0 >>>>>>>>>502 string x \b%-.1s >>>>>>>>>>503 ubyte&0xDF >0 >>>>>>>>>>>503 string x \b%-.1s >>>>>>>>>>>>504 ubyte&0xDF >0 >>>>>>>>>>>>>504 string x \b%-.1s >>>>>>505 ubyte&0xDF >0 >>>>>>>505 string x \b.%-.3s #IO.SYS >>>>>>472 ubyte&0xDF >0 or >>>>>>>472 string x \b %-.2s >>>>>>>>474 ubyte&0xDF >0 >>>>>>>>>474 string x \b%-.5s >>>>>>>>>>479 ubyte&0xDF >0 >>>>>>>>>>>479 string x \b%-.1s >>>>>>>480 ubyte&0xDF >0 >>>>>>>>480 string x \b.%-.3s #MSDOS.SYS >>>>>>>483 ubyte&0xDF >0 \b+ >>>>>>>>483 string x \b%-.5s >>>>>>>>>488 ubyte&0xDF >0 >>>>>>>>>>488 string x \b%-.3s >>>>>>>>491 ubyte&0xDF >0 >>>>>>>>>491 string x \b.%-.3s # >>390 string Ungueltiges\ System\ \xFF\r\n >>>412 string E/A-Fehler\ \ \ \ \xFF\r\n >>>>429 string Datentraeger\ wechseln\ und\ >>>>>455 string Taste\ druecken\r \b, Microsoft Windows 95/98/ME Bootloader (German) #WINBOOT.SYS only not spaces (0xDF) >>>>>>497 ubyte&0xDF >0 >>>>>>>497 string x %-.7s >>>>>>>>504 ubyte&0xDF >0 >>>>>>>>>504 string x \b%-.1s >>>>>>505 ubyte&0xDF >0 >>>>>>>505 string x \b.%-.3s #IO.SYS >>>>>>472 ubyte&0xDF >0 or >>>>>>>472 string x \b %-.2s >>>>>>>>474 ubyte&0xDF >0 >>>>>>>>>474 string x \b%-.6s >>>>>>>480 ubyte&0xDF >0 >>>>>>>>480 string x \b.%-.3s #MSDOS.SYS >>>>>>>483 ubyte&0xDF >0 \b+ >>>>>>>>483 string x \b%-.5s >>>>>>>>>488 ubyte&0xDF >0 >>>>>>>>>>488 string x \b%-.3s >>>>>>>>491 ubyte&0xDF >0 >>>>>>>>>491 string x \b.%-.3s # >>389 string Ungueltiges\ System\ \xFF\r\n >>>411 string E/A-Fehler\ \ \ \ \xFF\r\n >>>>428 string Datentraeger\ wechseln\ und\ >>>>>454 string Taste\ druecken\r \b, Microsoft Windows 95/98/ME Bootloader (GERMAN) # DOS names like IO.SYS,WINBOOT.SYS,MSDOS.SYS,WINBOOT.INI are 8 right space padded bytes+3 bytes >>>>>>472 string x %-.2s >>>>>>>474 ubyte&0xDF >0 >>>>>>>>474 string x \b%-.5s >>>>>>>>479 ubyte&0xDF >0 >>>>>>>>>479 string x \b%-.1s >>>>>>480 ubyte&0xDF >0 >>>>>>>480 string x \b.%-.3s >>>>>>483 ubyte&0xDF >0 \b+ >>>>>>>483 string x \b%-.5s >>>>>>>488 ubyte&0xDF >0 >>>>>>>>488 string x \b%-.2s >>>>>>>>490 ubyte&0xDF >0 >>>>>>>>>490 string x \b%-.1s >>>>>>>491 ubyte&0xDF >0 >>>>>>>>491 string x \b.%-.3s >479 ubyte&0xDF >0 >>416 string Kein\ System\ oder\ >>>433 string Laufwerksfehler >>>>450 string Wechseln\ und\ Taste\ dr\201cken \b, Microsoft DOS Bootloader (german) #IO.SYS >>>>>479 string x \b %-.2s >>>>>>481 ubyte&0xDF >0 >>>>>>>481 string x \b%-.6s >>>>>487 ubyte&0xDF >0 >>>>>>487 string x \b.%-.3s #MSDOS.SYS >>>>>>490 ubyte&0xDF >0 \b+ >>>>>>>490 string x \b%-.5s >>>>>>>>495 ubyte&0xDF >0 >>>>>>>>>495 string x \b%-.3s >>>>>>>498 ubyte&0xDF >0 >>>>>>>>498 string x \b.%-.3s # >376 search/41 Non-System\ disk\ or\ >>395 search/41 disk\ error\r >>>407 search/41 Replace\ and\ >>>>419 search/41 press\ \b, >>>>419 search/41 strike\ \b, old >>>>426 search/41 any\ key\ when\ ready\r MS or PC-DOS bootloader #449 Disk\ Boot\ failure\r MS 3.21 #466 Boot\ Failure\r MS 3.30 >>>>>468 search/18 \0 #IO.SYS,IBMBIO.COM >>>>>>&0 string x \b %-.2s >>>>>>>&-20 ubyte&0xDF >0 >>>>>>>>&-1 string x \b%-.4s >>>>>>>>>&-16 ubyte&0xDF >0 >>>>>>>>>>&-1 string x \b%-.2s >>>>>>&8 ubyte&0xDF >0 \b. >>>>>>>&-1 string x \b%-.3s #MSDOS.SYS,IBMDOS.COM >>>>>>&11 ubyte&0xDF >0 \b+ >>>>>>>&-1 string x \b%-.5s >>>>>>>>&-6 ubyte&0xDF >0 >>>>>>>>>&-1 string x \b%-.1s >>>>>>>>>>&-5 ubyte&0xDF >0 >>>>>>>>>>>&-1 string x \b%-.2s >>>>>>>&7 ubyte&0xDF >0 \b. >>>>>>>>&-1 string x \b%-.3s >441 string Cannot\ load\ from\ harddisk.\n\r >>469 string Insert\ Systemdisk\ >>>487 string and\ press\ any\ key.\n\r \b, MS (2.11) DOS bootloader #>43 string \224R-LOADER\ \ SYS =label >54 string SYS >>324 string VASKK >>>495 string NEWLDR\0 \b, DR-DOS Bootloader (LOADER.SYS) # >98 string Press\ a\ key\ to\ retry\0\r >>120 string Cannot\ find\ file\ \0\r >>>139 string Disk\ read\ error\0\r >>>>156 string Loading\ ...\0 \b, DR-DOS (3.41) Bootloader #DRBIOS.SYS >>>>>44 ubyte&0xDF >0 >>>>>>44 string x \b %-.6s >>>>>>>50 ubyte&0xDF >0 >>>>>>>>50 string x \b%-.2s >>>>>>52 ubyte&0xDF >0 >>>>>>>52 string x \b.%-.3s # >70 string IBMBIO\ \ COM >>472 string Cannot\ load\ DOS!\ >>>489 string Any\ key\ to\ retry \b, DR-DOS Bootloader >>471 string Cannot\ load\ DOS\ >>487 string press\ key\ to\ retry \b, Open-DOS Bootloader #?? >444 string KERNEL\ \ SYS >>314 string BOOT\ error! \b, FREE-DOS Bootloader >499 string KERNEL\ \ SYS >>305 string BOOT\ err!\0 \b, Free-DOS Bootloader >449 string KERNEL\ \ SYS >>319 string BOOT\ error! \b, FREE-DOS 0.5 Bootloader # >449 string Loading\ FreeDOS >>0x1AF ulelong >0 \b, FREE-DOS 0.95,1.0 Bootloader >>>497 ubyte&0xDF >0 >>>>497 string x \b %-.6s >>>>>503 ubyte&0xDF >0 >>>>>>503 string x \b%-.1s >>>>>>>504 ubyte&0xDF >0 >>>>>>>>504 string x \b%-.1s >>>>505 ubyte&0xDF >0 >>>>>505 string x \b.%-.3s # >331 string Error!.0 \b, FREE-DOS 1.0 bootloader # >125 string Loading\ FreeDOS...\r >>311 string BOOT\ error!\r \b, FREE-DOS bootloader >>>441 ubyte&0xDF >0 >>>>441 string x \b %-.6s >>>>>447 ubyte&0xDF >0 >>>>>>447 string x \b%-.1s >>>>>>>448 ubyte&0xDF >0 >>>>>>>>448 string x \b%-.1s >>>>449 ubyte&0xDF >0 >>>>>449 string x \b.%-.3s >124 string FreeDOS\0 >>331 string \ err\0 \b, FREE-DOS BETa 0.9 Bootloader # DOS names like KERNEL.SYS,KERNEL16.SYS,KERNEL32.SYS,METAKERN.SYS are 8 right space padded bytes+3 bytes >>>497 ubyte&0xDF >0 >>>>497 string x \b %-.6s >>>>>503 ubyte&0xDF >0 >>>>>>503 string x \b%-.1s >>>>>>>504 ubyte&0xDF >0 >>>>>>>>504 string x \b%-.1s >>>>505 ubyte&0xDF >0 >>>>>505 string x \b.%-.3s >>333 string \ err\0 \b, FREE-DOS BEta 0.9 Bootloader >>>497 ubyte&0xDF >0 >>>>497 string x \b %-.6s >>>>>503 ubyte&0xDF >0 >>>>>>503 string x \b%-.1s >>>>>>>504 ubyte&0xDF >0 >>>>>>>>504 string x \b%-.1s >>>>505 ubyte&0xDF >0 >>>>>505 string x \b.%-.3s >>334 string \ err\0 \b, FREE-DOS Beta 0.9 Bootloader >>>497 ubyte&0xDF >0 >>>>497 string x \b %-.6s >>>>>503 ubyte&0xDF >0 >>>>>>503 string x \b%-.1s >>>>>>>504 ubyte&0xDF >0 >>>>>>>>504 string x \b%-.1s >>>>505 ubyte&0xDF >0 >>>>>505 string x \b.%-.3s >336 string Error!\ >>343 string Hit\ a\ key\ to\ reboot. \b, FREE-DOS Beta 0.9sr1 Bootloader >>>497 ubyte&0xDF >0 >>>>497 string x \b %-.6s >>>>>503 ubyte&0xDF >0 >>>>>>503 string x \b%-.1s >>>>>>>504 ubyte&0xDF >0 >>>>>>>>504 string x \b%-.1s >>>>505 ubyte&0xDF >0 >>>>>505 string x \b.%-.3s # added by Joerg Jenderek # http://www.visopsys.org/ # http://partitionlogic.org.uk/ # OEM-ID=Visopsys >478 ulelong 0 >>(1.b+326) string I/O\ Error\ reading\ >>>(1.b+344) string Visopsys\ loader\r >>>>(1.b+361) string Press\ any\ key\ to\ continue.\r \b, Visopsys loader # http://alexfru.chat.ru/epm.html#bootprog >494 ubyte >0x4D >>495 string >E >>>495 string >>>3 string BootProg # It just looks for a program file name at the root directory # and loads corresponding file with following execution. # DOS names like STARTUP.BIN,STARTUPC.COM,STARTUPE.EXE are 8 right space padded bytes+3 bytes >>>>499 ubyte&0xDF >0 \b, COM/EXE Bootloader >>>>>499 use DOS-filename #If the boot sector fails to read any other sector, #it prints a very short message ("RE") to the screen and hangs the computer. #If the boot sector fails to find needed program in the root directory, #it also hangs with another message ("NF"). >>>>>492 string RENF \b, FAT (12 bit) >>>>>495 string RENF \b, FAT (16 bit) #If the boot sector fails to read any other sector, #it prints a very short message ("RE") to the screen and hangs the computer. # x86 bootloader end # added by Joerg Jenderek at Feb 2013 according to http://thestarman.pcministry.com/asm/mbr/MSWIN41.htm#FSINFO # and http://en.wikipedia.org/wiki/File_Allocation_Table#FS_Information_Sector >0 string RRaA >>0x1E4 string rrAa \b, FSInfosector #>>0x1FC uleshort =0 SHOULD BE ZERO >>>0x1E8 ulelong <0xffffffff \b, %u free clusters >>>0x1EC ulelong <0xffffffff \b, last allocated cluster %u # updated by Joerg Jenderek at Sep 2007 >3 ubyte 0 #no active flag >>446 ubyte 0 # partition 1 not empty >>>450 ubyte >0 # partitions 3,4 empty >>>>482 ubyte 0 >>>>>498 ubyte 0 # partition 2 ID=0,5,15 >>>>>>466 ubyte <0x10 >>>>>>>466 ubyte 0x05 \b, extended partition table >>>>>>>466 ubyte 0x0F \b, extended partition table (LBA) >>>>>>>466 ubyte 0x0 \b, extended partition table (last) # DOS x86 sector separated and moved from "DOS/MBR boot sector" by Joerg Jenderek at May 2011 >0x200 lelong 0x82564557 \b, BSD disklabel # by Joerg Jenderek at Apr 2013 # Print the DOS filenames from directory entry form with 8 right space padded bytes + 3 bytes for extension # like IO.SYS. MSDOS.SYS , KERNEL.SYS , DRBIO.SYS 0 name DOS-filename # space=0x20 (00100000b) means empty >0 ubyte&0xDF >0 >>0 ubyte x \b%c >>>1 ubyte&0xDF >0 >>>>1 ubyte x \b%c >>>>>2 ubyte&0xDF >0 >>>>>>2 ubyte x \b%c >>>>>>>3 ubyte&0xDF >0 >>>>>>>>3 ubyte x \b%c >>>>>>>>>4 ubyte&0xDF >0 >>>>>>>>>>4 ubyte x \b%c >>>>>>>>>>>5 ubyte&0xDF >0 >>>>>>>>>>>>5 ubyte x \b%c >>>>>>>>>>>>>6 ubyte&0xDF >0 >>>>>>>>>>>>>>6 ubyte x \b%c >>>>>>>>>>>>>>>7 ubyte&0xDF >0 >>>>>>>>>>>>>>>>7 ubyte x \b%c # DOS filename extension >>8 ubyte&0xDF >0 \b. >>>8 ubyte x \b%c >>>>9 ubyte&0xDF >0 >>>>>9 ubyte x \b%c >>>>>>10 ubyte&0xDF >0 >>>>>>>10 ubyte x \b%c # Print 2 following DOS filenames from directory entry form # like IO.SYS+MSDOS.SYS or ibmbio.com+ibmdos.com 0 name 2xDOS-filename # display 1 space >0 ubyte x \b >0 use DOS-filename >11 ubyte x \b+ >11 use DOS-filename # http://en.wikipedia.org/wiki/Master_boot_record#PTE # display standard partition table 0 name partition-table #>0 ubyte x PARTITION-TABLE # test and display 1st til 4th partition table entry >0 use partition-entry-test >16 use partition-entry-test >32 use partition-entry-test >48 use partition-entry-test # test for entry of partition table 0 name partition-entry-test # partition type ID > 0 >4 ubyte >0 # active flag 0 >>0 ubyte 0 >>>0 use partition-entry # active flag 0x80, 0x81, ... >>0 ubyte >0x7F >>>0 use partition-entry # Print entry of partition table 0 name partition-entry # partition type ID > 0 >4 ubyte >0 \b; partition >>64 leshort 0xAA55 1 >>48 leshort 0xAA55 2 >>32 leshort 0xAA55 3 >>16 leshort 0xAA55 4 >>4 ubyte x : ID=0x%x >>0 ubyte&0x80 0x80 \b, active >>0 ubyte >0x80 0x%x >>1 ubyte x \b, start-CHS ( >>1 use partition-chs >>5 ubyte x \b), end-CHS ( >>5 use partition-chs >>8 ulelong x \b), startsector %u >>12 ulelong x \b, %u sectors # Print cylinder,head,sector (CHS) of partition entry 0 name partition-chs # cylinder >1 ubyte x \b0x >1 ubyte&0xC0 0x40 \b1 >1 ubyte&0xC0 0x80 \b2 >1 ubyte&0xC0 0xC0 \b3 >2 ubyte x \b%x # head >0 ubyte x \b,%u # sector >1 ubyte&0x3F x \b,%u # FATX 0 string FATX FATX filesystem data # romfs filesystems - Juan Cespedes 0 string -rom1fs- romfs filesystem, version 1 >8 belong x %d bytes, >16 string x named %s. # netboot image - Juan Cespedes 0 lelong 0x1b031336L Netboot image, >4 lelong&0xFFFFFF00 0 >>4 lelong&0x100 0x000 mode 2 >>4 lelong&0x100 0x100 mode 3 >4 lelong&0xFFFFFF00 !0 unknown mode 0x18b string OS/2 OS/2 Boot Manager # updated by Joerg Jenderek at Oct 2008 and Sep 2012 # http://syslinux.zytor.com/iso.php # tested with versions 1.47,1.48,1.49,1.50,1.62,1.76,2.00,2.10;3.00,3.11,3.31,;3.70,3.71,3.73,3.75,3.80,3.82,3.84,3.86,4.01,4.03 and 4.05 # assembler instructions: cli;jmp 0:7Cyy (yy=0x40,0x5e,0x6c,0x6e,0x77);nop;nop 0 ulequad&0x909000007cc0eafa 0x909000007c40eafa >631 search/689 ISOLINUX\ isolinux Loader >>&0 string x (version %-4.4s) # http://syslinux.zytor.com/pxe.php # assembler instructions: jmp 7C05 0 ulelong 0x007c05ea pxelinux loader (version 2.13 or older) # assembler instructions: pushfd;pushad 0 ulelong 0x60669c66 pxelinux loader # assembler instructions: jmp 05 0 ulelong 0xc00005ea pxelinux loader (version 3.70 or newer) # http://syslinux.zytor.com/wiki/index.php/SYSLINUX 0 string LDLINUX\ SYS\ SYSLINUX loader >12 string x (older version %-4.4s) 0 string \r\nSYSLINUX\ SYSLINUX loader >11 string x (version %-4.4s) # syslinux updated and separated from "DOS/MBR boot sector" by Joerg Jenderek at Sep 2012 # assembler instructions: jmp yy (yy=0x3c,0x58);nop;"SYSLINUX" 0 ulelong&0x80909bEB 0x009018EB # OEM-ID not always "SYSLINUX" >434 search/47 Boot\ failed # followed by \r\n\0 or :\ >>482 search/132 \0LDLINUX\ SYS Syslinux bootloader (version 2.13 or older) >>1 ubyte 0x58 Syslinux bootloader (version 3.0-3.9) >459 search/30 Boot\ error\r\n\0 >>1 ubyte 0x58 Syslinux bootloader (version 3.10 or newer) # SYSLINUX MBR updated and separated from "DOS/MBR boot sector" by Joerg Jenderek at Sep 2012 # assembler instructions: mov di,0600h;mov cx,0100h 16 search/4 \xbf\x00\x06\xb9\x00\x01 # to display SYSLINUX MBR (36) before old DOS/MBR boot sector one with partition table (strength=50+21) !:strength +36 >94 search/249 Missing\ operating\ system # followed by \r for versions older 3.35 , .\r for versions newer 3.52 and point for other # skip Ranish MBR >>408 search/4 HD1/\0 >>408 default x >>>250 search/118 \0Operating\ system\ load SYSLINUX MBR # followed by "ing " or space >>>>292 search/98 error >>>>>&0 string \r (version 3.35 or older) >>>>>&0 string .\r (version 3.52 or newer) >>>>>&0 default x (version 3.36-3.51 ) >368 search/106 \0Disk\ error\ on\ boot\r\n SYSLINUX GPT-MBR >>156 search/10 \0Boot\ partition\ not\ found\r\n >>>270 search/10 \0OS\ not\ bootable\r\n (version 3.86 or older) >>174 search/10 \0Missing\ OS\r\n >>>189 search/10 \0Multiple\ active\ partitions\r\n (version 4.00 or newer) # SYSLINUX END # NetBSD mbr variants (master-boot-code version 1.22) added by Joerg Jenderek at Nov 2012 # assembler instructions: xor ax,ax;mov ax,ss;mov sp,0x7c00;mov ax, 0 ubequad 0x31c08ed0bc007c8e # mbr_bootsel magic before partition table not reliable with small ipl fragments #>444 uleshort 0xb5e1 >0004 uleshort x # ERRorTeXT >>181 search/166 Error\ \0\r\n NetBSD mbr # NT Drive Serial Number http://thestarman.pcministry.com/asm/mbr/Win2kmbr.htm#DS >>>0x1B8 ubelong >0 \b,Serial 0x%-.8x # BOOTSEL definitions contains assembler instructions: int 0x13;pop dx;push dx;push dx >>>0xbb search/71 \xcd\x13\x5a\x52\x52 \b,bootselector # BOOT_EXTENDED definitions contains assembler instructions: # xchg ecx,edx;addl ecx,edx;movw lba_info,si;movb 0x42,ah;pop dx;push dx;int 0x13 >>>0x96 search/1 \x66\x87\xca\x66\x01\xca\x66\x89\x16\x3a\x07\xbe\x32\x07\xb4\x42\x5a\x52\xcd\x13 \b,boot extended # COM_PORT_VAL definitions contains assembler instructions: outb al,dx;add 5,dl;inb %dx;test 0x40,al >>>0x130 search/55 \xee\x80\xc2\x05\xec\xa8\x40 \b,serial IO # not TERSE_ERROR >>>196 search/106 No\ active\ partition\0 >>>>&0 string Disk\ read\ error\0 >>>>>&0 string No\ operating\ system\0 \b,verbose # not NO_CHS definitions contains assembler instructions: pop dx;push dx;movb $8,ah;int0x13 >>>0x7d search/7 \x5a\x52\xb4\x08\xcd\x13 \b,CHS # not NO_LBA_CHECK definitions contains assembler instructions: movw 0x55aa,bx;movb 0x41,ah;pop dx;push dx;int 0x13 >>>0xa4 search/84 \xbb\xaa\x55\xb4\x41\x5a\x52\xcd\x13 \b,LBA-check # assembler instructions: movw nametab,bx >>>0x26 search/21 \xBB\x94\x07 # not NO_BANNER definitions contains assembler instructions: mov banner,si;call message_crlf >>>>&-9 ubequad&0xBE00f0E800febb94 0xBE0000E80000bb94 >>>>>181 search/166 Error\ \0 # "a: disk" , "Fn: diskn" or "NetBSD MBR boot" >>>>>>&3 string x \b,"%s" >>>446 use partition-table # Andrea Mazzoleni AdvanceCD mbr loader of http://advancemame.sourceforge.net/boot-readme.html # added by Joerg Jenderek at Nov 2012 for versions 1.3 - 1.4 # assembler instructions: jmp short 0x58;nop;ASCII 0 ubequad&0xeb58908000000000 0xeb58900000000000 # assembler instructions: cli;xor ax,ax;mov ds,ax;mov es,ax;mov ss, >(1.b+2) ubequad 0xfa31c08ed88ec08e # Error messages at end of code >>376 string No\ operating\ system\r\n\0 >>>398 string Disk\ error\r\n\0FDD\0HDD\0 >>>>419 string \ EBIOS\r\n\0 AdvanceMAME mbr # Neil Turton mbr loader variant of http://www.chiark.greenend.org.uk/~neilt/mbr/ # added by Joerg Jenderek at Mar 2011 for versions 1.0.0 - 1.1.11 # for 1st version assembler instructions: cld;xor ax,ax;mov DS,ax;MOV ES,AX;mov SI, # or cld;xor ax,ax;mov SS,ax;XOR SP,SP;mov DS, 0 ulequad&0xcE1b40D48EC031FC 0x8E0000D08EC031FC # pointer to the data starting with Neil Turton signature string >(0x1BC.s) string NDTmbr >>&-14 string 1234F\0 Turton mbr ( # parameters also viewed by install-mbr --list >>>(0x1BC.s+7) ubyte x \b%u<= >>>(0x1BC.s+9) ubyte x \bVersion<=%u #>>>(0x1BC.s+8) ubyte x asm_flag_%x >>>(0x1BC.s+8) ubyte&1 1 \b,Y2K-Fix # variant used by testdisk of http://www.cgsecurity.org/wiki/Menu_MBRCode >>>(0x1BC.s+8) ubyte&2 2 \b,TestDisk #0x1~1,..,0x8~4,0x10~F,0x80~A enabled #>>>(0x1BC.s+10) ubyte x \b,flags 0x%x #0x0~1,0x1~2,...,0x3~4,0x4~F,0x7~D default boot #>>>(0x1BC.s+11) ubyte x \b,cfg_def 0x%x # for older versions >>>(0x1BC.s+9) ubyte <2 #>>>>(0x1BC.s+12) ubyte 18 \b,%hhu/18 seconds >>>>(0x1BC.s+12) ubyte !18 \b,%u/18 seconds # floppy A: or B: >>>>(0x1BC.s+13) ubyte <2 \b,floppy 0x%x >>>>(0x1BC.s+13) ubyte >1 # 1st hard disc #>>>>>(0x1BC.s+13) ubyte 0x80 \b,drive 0x%x # not 1st hard disc >>>>>(0x1BC.s+13) ubyte !0x80 \b,drive 0x%x # for version >= 2 maximal timeout can be 65534 >>>(0x1BC.s+9) ubyte >1 #>>>>(0x1BC.s+12) uleshort 18 \b,%u/18 seconds >>>>(0x1BC.s+12) uleshort !18 \b,%u/18 seconds # floppy A: or B: >>>>(0x1BC.s+14) ubyte <2 \b,floppy 0x%x >>>>(0x1BC.s+14) ubyte >1 # 1st hard disc #>>>>>(0x1BC.s+14) ubyte 0x80 \b,drive 0x%x # not 1st hard disc >>>>>(0x1BC.s+14) ubyte !0x80 \b,drive 0x%x >>>0 ubyte x \b) # added by Joerg Jenderek # In the second sector (+0x200) are variables according to grub-0.97/stage2/asm.S or # grub-1.94/kern/i386/pc/startup.S # http://www.gnu.org/software/grub/manual/grub.html#Embedded-data # usual values are marked with comments to get only informations of strange GRUB loaders 0x200 uleshort 0x70EA # found only version 3.{1,2} >0x206 ubeshort >0x0300 # GRUB version (0.5.)95,0.93,0.94,0.96,0.97 > "00" >>0x212 ubyte >0x29 >>>0x213 ubyte >0x29 # not iso9660_stage1_5 #>>>0 ulelong&0x00BE5652 0x00BE5652 >>>>0x213 ubyte >0x29 GRand Unified Bootloader # config_file for stage1_5 is 0xffffffff + default "/boot/grub/stage2" >>>>0x217 ubyte 0xFF stage1_5 >>>>0x217 ubyte <0xFF stage2 >>>>0x206 ubyte x \b version %u >>>>0x207 ubyte x \b.%u # module_size for 1.94 >>>>0x208 ulelong <0xffffff \b, installed partition %u #>>>>0x208 ulelong =0xffffff \b, %lu (default) >>>>0x208 ulelong >0xffffff \b, installed partition %u # GRUB 0.5.95 unofficial >>>>0x20C ulelong&0x2E300000 0x2E300000 # 0=stage2 1=ffs 2=e2fs 3=fat 4=minix 5=reiserfs >>>>>0x20C ubyte x \b, identifier 0x%x #>>>>>0x20D ubyte =0 \b, LBA flag 0x%x (default) >>>>>0x20D ubyte >0 \b, LBA flag 0x%x # GRUB version as string >>>>>0x20E string >\0 \b, GRUB version %-s # for stage1_5 is 0xffffffff + config_file "/boot/grub/stage2" default >>>>>>0x215 ulong 0xffffffff >>>>>>>0x219 string >\0 \b, configuration file %-s >>>>>>0x215 ulong !0xffffffff >>>>>>>0x215 string >\0 \b, configuration file %-s # newer GRUB versions >>>>0x20C ulelong&0x2E300000 !0x2E300000 ##>>>>>0x20C ulelong =0 \b, saved entry %d (usual) >>>>>0x20C ulelong >0 \b, saved entry %d # for 1.94 contains kernel image size # for 0.93,0.94,0.96,0.97 # 0=stage2 1=ffs 2=e2fs 3=fat 4=minix 5=reiserfs 6=vstafs 7=jfs 8=xfs 9=iso9660 a=ufs2 >>>>>0x210 ubyte x \b, identifier 0x%x # The flag for LBA forcing is in most cases 0 #>>>>>0x211 ubyte =0 \b, LBA flag 0x%x (default) >>>>>0x211 ubyte >0 \b, LBA flag 0x%x # GRUB version as string >>>>>0x212 string >\0 \b, GRUB version %-s # for stage1_5 is 0xffffffff + config_file "/boot/grub/stage2" default >>>>>0x217 ulong 0xffffffff >>>>>>0x21b string >\0 \b, configuration file %-s >>>>>0x217 ulong !0xffffffff >>>>>>0x217 string >\0 \b, configuration file %-s # DOS x86 sector updated and separated from "DOS/MBR boot sector" by Joerg Jenderek at May 2011 # JuMP short bootcodeoffset NOP assembler instructions will usually be EB xx 90 # over BIOS parameter block (BPB) # http://thestarman.pcministry.com/asm/2bytejumps.htm#FWD # older drives may use Near JuMP instruction E9 xx xx # minimal short forward jump found 0x29 for bootloaders or 0x0 # maximal short forward jump is 0x7f # OEM-ID is empty or contain readable bytes 0 ulelong&0x804000E9 0x000000E9 !:strength +60 # mtools-3.9.8/msdos.h # usual values are marked with comments to get only informations of strange FAT systems # valid sectorsize must be a power of 2 from 32 to 32768 >11 uleshort&0x001f 0 >>11 uleshort <32769 >>>11 uleshort >31 >>>>21 ubyte&0xf0 0xF0 >>>>>0 ubyte 0xEB DOS/MBR boot sector >>>>>>1 ubyte x \b, code offset 0x%x+2 >>>>>0 ubyte 0xE9 >>>>>>1 uleshort x \b, code offset 0x%x+3 >>>>>3 string >\0 \b, OEM-ID "%-.8s" #http://mirror.href.com/thestarman/asm/debug/debug2.htm#IHC >>>>>>8 string IHC \b cached by Windows 9M >>>>>11 uleshort >512 \b, Bytes/sector %u #>>>>>11 uleshort =512 \b, Bytes/sector %u=512 (usual) >>>>>11 uleshort <512 \b, Bytes/sector %u >>>>>13 ubyte >1 \b, sectors/cluster %u #>>>>>13 ubyte =1 \b, sectors/cluster %u (usual on Floppies) # for lazy FAT32 implementation like Transcend digital photo frame PF830 >>>>>82 string/c fat32 >>>>>>14 uleshort !32 \b, reserved sectors %u #>>>>>>14 uleshort =32 \b, reserved sectors %u (usual Fat32) >>>>>82 string/c !fat32 >>>>>>14 uleshort >1 \b, reserved sectors %u #>>>>>>14 uleshort =1 \b, reserved sectors %u (usual FAT12,FAT16) #>>>>>>14 uleshort 0 \b, reserved sectors %u (usual NTFS) >>>>>16 ubyte >2 \b, FATs %u #>>>>>16 ubyte =2 \b, FATs %u (usual) >>>>>16 ubyte =1 \b, FAT %u >>>>>16 ubyte >0 >>>>>17 uleshort >0 \b, root entries %u #>>>>>17 uleshort =0 \b, root entries %hu=0 (usual Fat32) >>>>>19 uleshort >0 \b, sectors %u (volumes <=32 MB) #>>>>>19 uleshort =0 \b, sectors %hu=0 (usual Fat32) >>>>>21 ubyte >0xF0 \b, Media descriptor 0x%x #>>>>>21 ubyte =0xF0 \b, Media descriptor 0x%x (usual floppy) >>>>>21 ubyte <0xF0 \b, Media descriptor 0x%x >>>>>22 uleshort >0 \b, sectors/FAT %u #>>>>>22 uleshort =0 \b, sectors/FAT %hu=0 (usual Fat32) >>>>>24 uleshort x \b, sectors/track %u >>>>>26 ubyte >2 \b, heads %u #>>>>>26 ubyte =2 \b, heads %u (usual floppy) >>>>>26 ubyte =1 \b, heads %u # valid only for sector sizes with more then 32 Bytes >>>>>11 uleshort >32 # http://en.wikipedia.org/wiki/Design_of_the_FAT_file_system#Extended_BIOS_Parameter_Block # skip for values 2,2Ah,70h,73h,DFh # and continue for extended boot signature values 0,28h,29h,80h >>>>>>38 ubyte&0x56 =0 >>>>>>>28 ulelong >0 \b, hidden sectors %u #>>>>>>>28 ulelong =0 \b, hidden sectors %u (usual floppy) >>>>>>>32 ulelong >0 \b, sectors %u (volumes > 32 MB) #>>>>>>>32 ulelong =0 \b, sectors %u (volumes > 32 MB) # FAT<32 bit specific >>>>>>>82 string/c !fat32 #>>>>>>>>36 ubyte 0x80 \b, physical drive 0x%x=0x80 (usual harddisk) #>>>>>>>>36 ubyte 0 \b, physical drive 0x%x=0 (usual floppy) >>>>>>>>36 ubyte !0x80 >>>>>>>>>36 ubyte !0 \b, physical drive 0x%x # VGA-copy CRC or # in Windows NT bit 0 is a dirty flag to request chkdsk at boot time. bit 1 requests surface scan too >>>>>>>>37 ubyte >0 \b, reserved 0x%x #>>>>>>>>37 ubyte =0 \b, reserved 0x%x # extended boot signatur value is 0x80 for NTFS, 0x28 or 0x29 for others >>>>>>>>38 ubyte !0x29 \b, dos < 4.0 BootSector (0x%x) >>>>>>>>38 ubyte&0xFE =0x28 >>>>>>>>>39 ulelong x \b, serial number 0x%x >>>>>>>>38 ubyte =0x29 >>>>>>>>>43 string >>>>>>>>43 string >NO\ NAME \b, label: "%11.11s" >>>>>>>>>43 string =NO\ NAME \b, unlabeled # there exist some old floppies without word FAT at offset 54 # a word like "FATnm " is only a hint for a FAT size on nm-bits # Normally the number of clusters is calculated by the values of BPP. # if it is small enough FAT is 12 bit, if it is too big enough FAT is 32 bit, # otherwise FAT is 16 bit. # http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/determining-fat-widths.html >>>>>82 string/c !fat32 >>>>>>54 string FAT12 \b, FAT (12 bit) >>>>>>54 string FAT16 \b, FAT (16 bit) >>>>>>54 default x # determinate FAT bit size by media descriptor # small floppies implies FAT12 >>>>>>>21 ubyte <0xF0 \b, FAT (12 bit by descriptor) # with media descriptor F0h floppy or maybe superfloppy with FAT16 >>>>>>>21 ubyte =0xF0 # superfloppy (many sectors) implies FAT16 >>>>>>>>32 ulelong >0xFFFF \b, FAT (16 bit by descriptor+sectors) # no superfloppy with media descriptor F0h implies FAT12 >>>>>>>>32 default x \b, FAT (12 bit by descriptor+sectors) # with media descriptor F8h floppy or hard disc with FAT12 or FAT16 >>>>>>>21 ubyte =0xF8 # 360 KiB with media descriptor F8h, 9 sectors per track ,single sided floppy implies FAT12 >>>>>>>>19 ubequad 0xd002f80300090001 \b, FAT (12 bit by descriptor+geometry) # hard disc with FAT12 or FAT16 >>>>>>>>19 default x \b, FAT (1Y bit by descriptor) # with media descriptor FAh floppy, RAM disc with FAT12 or FAT16 or Tandy hard disc >>>>>>>21 ubyte =0xFA # 320 KiB with media descriptor FAh, 8 sectors per track ,single sided floppy implies FAT12 >>>>>>>>19 ubequad 0x8002fa0200080001 \b, FAT (12 bit by descriptor+geometry) # RAM disc with FAT12 or FAT16 or Tandy hard disc >>>>>>>>19 default x \b, FAT (1Y bit by descriptor) # others are floppy >>>>>>>21 default x \b, FAT (12 bit by descriptor) # FAT32 bit specific >>>>>82 string/c fat32 \b, FAT (32 bit) >>>>>>36 ulelong x \b, sectors/FAT %u # http://technet.microsoft.com/en-us/library/cc977221.aspx >>>>>>40 uleshort >0 \b, extension flags 0x%x #>>>>>>40 uleshort =0 \b, extension flags %hu >>>>>>42 uleshort >0 \b, fsVersion %u #>>>>>>42 uleshort =0 \b, fsVersion %u (usual) >>>>>>44 ulelong >2 \b, rootdir cluster %u #>>>>>>44 ulelong =2 \b, rootdir cluster %u #>>>>>>44 ulelong =1 \b, rootdir cluster %u >>>>>>48 uleshort >1 \b, infoSector %u #>>>>>>48 uleshort =1 \b, infoSector %u (usual) >>>>>>48 uleshort <1 \b, infoSector %u # 0 or 0xFFFF instead of usual 6 means no backup sector >>>>>>50 uleshort =0xFFFF \b, no Backup boot sector >>>>>>50 uleshort =0 \b, no Backup boot sector #>>>>>>50 uleshort =6 \b, Backup boot sector %u (usual) >>>>>>50 default x >>>>>>>50 uleshort x \b, Backup boot sector %u # corrected by Joerg Jenderek at Feb 2011 according to http://thestarman.pcministry.com/asm/mbr/MSWIN41.htm#FSINFO >>>>>>52 ulelong >0 \b, reserved1 0x%x >>>>>>56 ulelong >0 \b, reserved2 0x%x >>>>>>60 ulelong >0 \b, reserved3 0x%x # same structure as FAT1X #>>>>>>64 ubyte =0x80 \b, physical drive 0x%x=80 (usual harddisk) #>>>>>>64 ubyte =0 \b, physical drive 0x%x=0 (usual floppy) >>>>>>64 ubyte !0x80 >>>>>>>64 ubyte >0 \b, physical drive 0x%x # in Windows NT bit 0 is a dirty flag to request chkdsk at boot time. bit 1 requests surface scan too >>>>>>65 ubyte >0 \b, reserved 0x%x >>>>>>66 ubyte !0x29 \b, dos < 4.0 BootSector (0x%x) >>>>>>66 ubyte =0x29 >>>>>>>67 ulelong x \b, serial number 0x%x >>>>>>>71 string >>>>>>71 string >NO\ NAME \b, label: "%11.11s" >>>>>>>71 string =NO\ NAME \b, unlabeled # additional tests for floppy image added by Joerg Jenderek # no fixed disk >>>>>21 ubyte !0xF8 # floppy media with 12 bit FAT >>>>>>54 string !FAT16 # test for FAT after bootsector >>>>>>>(11.s) ulelong&0x00ffffF0 0x00ffffF0 \b, followed by FAT # floppy image !:mime application/x-ima # NTFS specific added by Joerg Jenderek at Mar 2011 according to http://thestarman.pcministry.com/asm/mbr/NTFSBR.htm # and http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/bios-parameter-block.html # 0 FATs >>>>>16 ubyte =0 # 0 root entries >>>>>>17 uleshort =0 # 0 DOS sectors >>>>>>>19 uleshort =0 # 0 sectors/FAT # dos < 4.0 BootSector value found is 0x80 #38 ubyte =0x80 \b, dos < 4.0 BootSector (0x%x) >>>>>>>>22 uleshort =0 \b; NTFS >>>>>>>>>24 uleshort >0 \b, sectors/track %u >>>>>>>>>36 ulelong !0x800080 \b, physical drive 0x%x >>>>>>>>>40 ulequad >0 \b, sectors %lld >>>>>>>>>48 ulequad >0 \b, $MFT start cluster %lld >>>>>>>>>56 ulequad >0 \b, $MFTMirror start cluster %lld # Values 0 to 127 represent MFT record sizes of 0 to 127 clusters. # Values 128 to 255 represent MFT record sizes of 2^(256-N) bytes. >>>>>>>>>64 lelong <256 >>>>>>>>>>64 lelong <128 \b, clusters/RecordSegment %d >>>>>>>>>>64 ubyte >127 \b, bytes/RecordSegment 2^(-1*%i) # Values 0 to 127 represent index block sizes of 0 to 127 clusters. # Values 128 to 255 represent index block sizes of 2^(256-N) byte >>>>>>>>>68 ulelong <256 >>>>>>>>>>68 ulelong <128 \b, clusters/index block %d #>>>>>>>>>>68 ulelong >127 \b, bytes/index block 2^(256-%d) >>>>>>>>>>68 ubyte >127 \b, bytes/index block 2^(-1*%i) >>>>>>>>>72 ulequad x \b, serial number 0%llx >>>>>>>>>80 ulelong >0 \b, checksum 0x%x #>>>>>>>>>80 ulelong =0 \b, checksum 0x%x=0 (usual) >>>>>>>>>0x258 ulelong&0x00009090 =0x00009090 >>>>>>>>>>&-92 indirect x \b; contains # For 2nd NTFS sector added by Joerg Jenderek at Jan 2013 # http://thestarman.pcministry.com/asm/mbr/NTFSbrHexEd.htm # unused assembler instructions JMP y2;NOP;NOP 0x056 ulelong&0xFFFF0FFF 0x909002EB # unicode loadername terminated by CTRL-D >(0.s*2) ulelong&0xFFFFFF00 0x00040000 # loadernames are NTLDR,CMLDR,PELDR,$LDR$ or BOOTMGR >>0x002 lestring16 x Microsoft Windows XP/VISTA bootloader %-5.5s >>0x12 string $ >>>0x0c lestring16 x \b%-2.2s ### DOS,NTFS boot sectors end 9564 lelong 0x00011954 Unix Fast File system [v1] (little-endian), >8404 string x last mounted on %s, #>9504 ledate x last checked at %s, >8224 ledate x last written at %s, >8401 byte x clean flag %d, >8228 lelong x number of blocks %d, >8232 lelong x number of data blocks %d, >8236 lelong x number of cylinder groups %d, >8240 lelong x block size %d, >8244 lelong x fragment size %d, >8252 lelong x minimum percentage of free blocks %d, >8256 lelong x rotational delay %dms, >8260 lelong x disk rotational speed %drps, >8320 lelong 0 TIME optimization >8320 lelong 1 SPACE optimization 42332 lelong 0x19540119 Unix Fast File system [v2] (little-endian) >&-1164 string x last mounted on %s, >&-696 string >\0 volume name %s, >&-304 leqldate x last written at %s, >&-1167 byte x clean flag %d, >&-1168 byte x readonly flag %d, >&-296 lequad x number of blocks %lld, >&-288 lequad x number of data blocks %lld, >&-1332 lelong x number of cylinder groups %d, >&-1328 lelong x block size %d, >&-1324 lelong x fragment size %d, >&-180 lelong x average file size %d, >&-176 lelong x average number of files in dir %d, >&-272 lequad x pending blocks to free %lld, >&-264 lelong x pending inodes to free %d, >&-664 lequad x system-wide uuid %0llx, >&-1316 lelong x minimum percentage of free blocks %d, >&-1248 lelong 0 TIME optimization >&-1248 lelong 1 SPACE optimization 66908 lelong 0x19540119 Unix Fast File system [v2] (little-endian) >&-1164 string x last mounted on %s, >&-696 string >\0 volume name %s, >&-304 leqldate x last written at %s, >&-1167 byte x clean flag %d, >&-1168 byte x readonly flag %d, >&-296 lequad x number of blocks %lld, >&-288 lequad x number of data blocks %lld, >&-1332 lelong x number of cylinder groups %d, >&-1328 lelong x block size %d, >&-1324 lelong x fragment size %d, >&-180 lelong x average file size %d, >&-176 lelong x average number of files in dir %d, >&-272 lequad x pending blocks to free %lld, >&-264 lelong x pending inodes to free %d, >&-664 lequad x system-wide uuid %0llx, >&-1316 lelong x minimum percentage of free blocks %d, >&-1248 lelong 0 TIME optimization >&-1248 lelong 1 SPACE optimization 9564 belong 0x00011954 Unix Fast File system [v1] (big-endian), >7168 belong 0x4c41424c Apple UFS Volume >>7186 string x named %s, >>7176 belong x volume label version %d, >>7180 bedate x created on %s, >8404 string x last mounted on %s, #>9504 bedate x last checked at %s, >8224 bedate x last written at %s, >8401 byte x clean flag %d, >8228 belong x number of blocks %d, >8232 belong x number of data blocks %d, >8236 belong x number of cylinder groups %d, >8240 belong x block size %d, >8244 belong x fragment size %d, >8252 belong x minimum percentage of free blocks %d, >8256 belong x rotational delay %dms, >8260 belong x disk rotational speed %drps, >8320 belong 0 TIME optimization >8320 belong 1 SPACE optimization 42332 belong 0x19540119 Unix Fast File system [v2] (big-endian) >&-1164 string x last mounted on %s, >&-696 string >\0 volume name %s, >&-304 beqldate x last written at %s, >&-1167 byte x clean flag %d, >&-1168 byte x readonly flag %d, >&-296 bequad x number of blocks %lld, >&-288 bequad x number of data blocks %lld, >&-1332 belong x number of cylinder groups %d, >&-1328 belong x block size %d, >&-1324 belong x fragment size %d, >&-180 belong x average file size %d, >&-176 belong x average number of files in dir %d, >&-272 bequad x pending blocks to free %lld, >&-264 belong x pending inodes to free %d, >&-664 bequad x system-wide uuid %0llx, >&-1316 belong x minimum percentage of free blocks %d, >&-1248 belong 0 TIME optimization >&-1248 belong 1 SPACE optimization 66908 belong 0x19540119 Unix Fast File system [v2] (big-endian) >&-1164 string x last mounted on %s, >&-696 string >\0 volume name %s, >&-304 beqldate x last written at %s, >&-1167 byte x clean flag %d, >&-1168 byte x readonly flag %d, >&-296 bequad x number of blocks %lld, >&-288 bequad x number of data blocks %lld, >&-1332 belong x number of cylinder groups %d, >&-1328 belong x block size %d, >&-1324 belong x fragment size %d, >&-180 belong x average file size %d, >&-176 belong x average number of files in dir %d, >&-272 bequad x pending blocks to free %lld, >&-264 belong x pending inodes to free %d, >&-664 bequad x system-wide uuid %0llx, >&-1316 belong x minimum percentage of free blocks %d, >&-1248 belong 0 TIME optimization >&-1248 belong 1 SPACE optimization # ext2/ext3 filesystems - Andreas Dilger # ext4 filesystem - Eric Sandeen # volume label and UUID Russell Coker # http://etbe.coker.com.au/2008/07/08/label-vs-uuid-vs-device/ 0x438 leshort 0xEF53 Linux >0x44c lelong x rev %d >0x43e leshort x \b.%d # No journal? ext2 >0x45c lelong ^0x0000004 ext2 filesystem data >>0x43a leshort ^0x0000001 (mounted or unclean) # Has a journal? ext3 or ext4 >0x45c lelong &0x0000004 # and small INCOMPAT? >>0x460 lelong <0x0000040 # and small RO_COMPAT? >>>0x464 lelong <0x0000008 ext3 filesystem data # else large RO_COMPAT? >>>0x464 lelong >0x0000007 ext4 filesystem data # else large INCOMPAT? >>0x460 lelong >0x000003f ext4 filesystem data >0x468 belong x \b, UUID=%08x >0x46c beshort x \b-%04x >0x46e beshort x \b-%04x >0x470 beshort x \b-%04x >0x472 belong x \b-%08x >0x476 beshort x \b%04x >0x478 string >0 \b, volume name "%s" # General flags for any ext* fs >0x460 lelong &0x0000004 (needs journal recovery) >0x43a leshort &0x0000002 (errors) # INCOMPAT flags >0x460 lelong &0x0000001 (compressed) #>0x460 lelong &0x0000002 (filetype) #>0x460 lelong &0x0000010 (meta bg) >0x460 lelong &0x0000040 (extents) >0x460 lelong &0x0000080 (64bit) #>0x460 lelong &0x0000100 (mmp) #>0x460 lelong &0x0000200 (flex bg) # RO_INCOMPAT flags #>0x464 lelong &0x0000001 (sparse super) >0x464 lelong &0x0000002 (large files) >0x464 lelong &0x0000008 (huge files) #>0x464 lelong &0x0000010 (gdt checksum) #>0x464 lelong &0x0000020 (many subdirs) #>0x463 lelong &0x0000040 (extra isize) # Minix filesystems - Juan Cespedes 0x410 leshort 0x137f !:strength / 2 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V1, %d zones >0x1e string minix \b, bootable 0x410 beshort 0x137f !:strength / 2 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V1 (big endian), %d zones >0x1e string minix \b, bootable 0x410 leshort 0x138f !:strength / 2 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V1, 30 char names, %d zones >0x1e string minix \b, bootable 0x410 beshort 0x138f !:strength / 2 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V1, 30 char names (big endian), %d zones >0x1e string minix \b, bootable 0x410 leshort 0x2468 >0x402 beshort < 100 >>0x402 beshort > -1 Minix filesystem, V2, %d zones >0x1e string minix \b, bootable 0x410 beshort 0x2468 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V2 (big endian), %d zones >0x1e string minix \b, bootable 0x410 leshort 0x2478 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V2, 30 char names, %d zones >0x1e string minix \b, bootable 0x410 leshort 0x2478 >0x402 beshort < 100 >0x402 beshort > -1 Minix filesystem, V2, 30 char names, %d zones >0x1e string minix \b, bootable 0x410 beshort 0x2478 >0x402 beshort !0 Minix filesystem, V2, 30 char names (big endian), %d zones >0x1e string minix \b, bootable 0x410 leshort 0x4d5a >0x402 beshort !0 Minix filesystem, V3, %d zones >0x1e string minix \b, bootable # SGI disk labels - Nathan Scott 0 belong 0x0BE5A941 SGI disk label (volume header) # SGI XFS filesystem - Nathan Scott 0 belong 0x58465342 SGI XFS filesystem data >0x4 belong x (blksz %d, >0x68 beshort x inosz %d, >0x64 beshort ^0x2004 v1 dirs) >0x64 beshort &0x2004 v2 dirs) ############################################################################ # Minix-ST kernel floppy 0x800 belong 0x46fc2700 Atari-ST Minix kernel image # http://en.wikipedia.org/wiki/BIOS_parameter_block # floppies with valid BPB and any instruction at beginning >19 string \240\005\371\005\0\011\0\2\0 \b, 720k floppy >19 string \320\002\370\005\0\011\0\1\0 \b, 360k floppy ############################################################################ # Hmmm, is this a better way of detecting _standard_ floppy images ? 19 string \320\002\360\003\0\011\0\1\0 DOS floppy 360k >0x1FE leshort 0xAA55 \b, DOS/MBR hard disk boot sector 19 string \240\005\371\003\0\011\0\2\0 DOS floppy 720k >0x1FE leshort 0xAA55 \b, DOS/MBR hard disk boot sector 19 string \100\013\360\011\0\022\0\2\0 DOS floppy 1440k >0x1FE leshort 0xAA55 \b, DOS/MBR hard disk boot sector 19 string \240\005\371\005\0\011\0\2\0 DOS floppy 720k, IBM >0x1FE leshort 0xAA55 \b, DOS/MBR hard disk boot sector 19 string \100\013\371\005\0\011\0\2\0 DOS floppy 1440k, mkdosfs >0x1FE leshort 0xAA55 \b, DOS/MBR hard disk boot sector 19 string \320\002\370\005\0\011\0\1\0 Atari-ST floppy 360k 19 string \240\005\371\005\0\011\0\2\0 Atari-ST floppy 720k # | | | | | # | | | | heads # | | | sectors/track # | | sectors/FAT # | media descriptor # BPB: sectors # Valid media descriptor bytes for MS-DOS: # # Byte Capacity Media Size and Type # ------------------------------------------------- # # F0 2.88 MB 3.5-inch, 2-sided, 36-sector # F0 1.44 MB 3.5-inch, 2-sided, 18-sector # F9 720K 3.5-inch, 2-sided, 9-sector # F9 1.2 MB 5.25-inch, 2-sided, 15-sector # FD 360K 5.25-inch, 2-sided, 9-sector # FF 320K 5.25-inch, 2-sided, 8-sector # FC 180K 5.25-inch, 1-sided, 9-sector # FE 160K 5.25-inch, 1-sided, 8-sector # FE 250K 8-inch, 1-sided, single-density # FD 500K 8-inch, 2-sided, single-density # FE 1.2 MB 8-inch, 2-sided, double-density # F8 ----- Fixed disk # # FC xxxK Apricot 70x1x9 boot disk. # # Originally a bitmap: # xxxxxxx0 Not two sided # xxxxxxx1 Double sided # xxxxxx0x Not 8 SPT # xxxxxx1x 8 SPT # xxxxx0xx Not Removable drive # xxxxx1xx Removable drive # 11111xxx Must be one. # # But now it's rather random: # 111111xx Low density disk # 00 SS, Not 8 SPT # 01 DS, Not 8 SPT # 10 SS, 8 SPT # 11 DS, 8 SPT # # 11111001 Double density 3 1/2 floppy disk, high density 5 1/4 # 11110000 High density 3 1/2 floppy disk # 11111000 Hard disk any format # # all FAT12 (strength=70) floppies with sectorsize 512 added by Joerg Jenderek at Jun 2013 # http://en.wikipedia.org/wiki/File_Allocation_Table#Exceptions # Too Weak. #512 ubelong&0xE0ffff00 0xE0ffff00 # without valid Media descriptor in place of BPB, cases with are done at other places #>21 ubyte <0xE5 floppy with old FAT filesystem # but valid Media descriptor at begin of FAT #>>512 ubyte =0xed 720k #>>512 ubyte =0xf0 1440k #>>512 ubyte =0xf8 720k #>>512 ubyte =0xf9 1220k #>>512 ubyte =0xfa 320k #>>512 ubyte =0xfb 640k #>>512 ubyte =0xfc 180k # look like an an old DOS directory entry #>>>0xA0E ubequad 0 #>>>>0xA00 ubequad !0 #!:mime application/x-ima #>>512 ubyte =0xfd # look for 2nd FAT at different location to distinguish between 360k and 500k #>>>0x600 ubelong&0xE0ffff00 0xE0ffff00 360k #>>>0x500 ubelong&0xE0ffff00 0xE0ffff00 500k #>>>0xA0E ubequad 0 #!:mime application/x-ima #>>512 ubyte =0xfe #>>>0x400 ubelong&0xE0ffff00 0xE0ffff00 160k #>>>>0x60E ubequad 0 #>>>>>0x600 ubequad !0 #!:mime application/x-ima #>>>0xC00 ubelong&0xE0ffff00 0xE0ffff00 1200k #>>512 ubyte =0xff 320k #>>>0x60E ubequad 0 #>>>>0x600 ubequad !0 #!:mime application/x-ima #>>512 ubyte x \b, Media descriptor 0x%x # without x86 jump instruction #>>0 ulelong&0x804000E9 !0x000000E9 # assembler instructions: CLI;MOV SP,1E7;MOV AX;07c0;MOV #>>>0 ubequad 0xfabce701b8c0078e \b, MS-DOS 1.12 bootloader # IOSYS.COM+MSDOS.COM #>>>>0xc4 use 2xDOS-filename #>>0 ulelong&0x804000E9 =0x000000E9 # only x86 short jump instruction found #>>>0 ubyte =0xEB #>>>>1 ubyte x \b, code offset 0x%x+2 # http://thestarman.pcministry.com/DOS/ibm100/Boot.htm # assembler instructions: CLI;MOV AX,CS;MOV DS,AX;MOV DX,0 #>>>>(1.b+2) ubequad 0xfa8cc88ed8ba0000 \b, PC-DOS 1.0 bootloader # ibmbio.com+ibmdos.com #>>>>>0x176 use DOS-filename #>>>>>0x181 ubyte x \b+ #>>>>>0x182 use DOS-filename # http://thestarman.pcministry.com/DOS/ibm110/Boot.htm # assembler instructions: CLI;MOV AX,CS;MOV DS,AX;XOR DX,DX;MOV #>>>>(1.b+2) ubequad 0xfa8cc88ed833d28e \b, PC-DOS 1.1 bootloader # ibmbio.com+ibmdos.com #>>>>>0x18b use DOS-filename #>>>>>0x196 ubyte x \b+ #>>>>>0x197 use DOS-filename # http://en.wikipedia.org/wiki/Zenith_Data_Systems # assembler instructions: MOV BX,07c0;MOV SS,BX;MOV SP,01c6 #>>>>(1.b+2) ubequad 0xbbc0078ed3bcc601 \b, Zenith Data Systems MS-DOS 1.25 bootloader # IO.SYS+MSDOS.SYS #>>>>>0x20 use 2xDOS-filename # http://en.wikipedia.org/wiki/Corona_Data_Systems # assembler instructions: MOV AX,CS;MOV DS,AX;CLI;MOV SS,AX; #>>>>(1.b+2) ubequad 0x8cc88ed8fa8ed0bc \b, MS-DOS 1.25 bootloader # IO.SYS+MSDOS.SYS #>>>>>0x69 use 2xDOS-filename # assembler instructions: CLI;PUSH CS;POP SS;MOV SP,7c00; #>>>>(1.b+2) ubequad 0xfa0e17bc007cb860 \b, MS-DOS 2.11 bootloader # defect IO.SYS+MSDOS.SYS ? #>>>>>0x162 use 2xDOS-filename 0 name cdrom >38913 string !NSR0 ISO 9660 CD-ROM filesystem data !:mime application/x-iso9660-image >38913 string NSR0 UDF filesystem data !:mime application/x-iso9660-image >>38917 string 1 (version 1.0) >>38917 string 2 (version 1.5) >>38917 string 3 (version 2.0) >>38917 byte >0x33 (unknown version, ID 0x%X) >>38917 byte <0x31 (unknown version, ID 0x%X) +>0x1FE leshort 0xAA55 (DOS/MBR boot sector) # "application id" which appears to be used as a volume label >32808 string/T >\0 '%s' >34816 string \000CD001\001EL\ TORITO\ SPECIFICATION (bootable) 37633 string CD001 ISO 9660 CD-ROM filesystem data (raw 2352 byte sectors) !:mime application/x-iso9660-image 32777 string CDROM High Sierra CD-ROM filesystem data # CDROM Filesystems # https://en.wikipedia.org/wiki/ISO_9660 # Modified for UDF by gerardo.cacciari@gmail.com 32769 string CD001 # mime line at that position does not work # to display CD-ROM (70=81-11) after MBR (113=40+72+1), partition-table (71=50+21) and before Apple Driver Map (51) !:strength -11 # to display CD-ROM (114=81+33) before MBR (113=40+72+1), partition-table (71=50+21) and Apple Driver Map (51) # does not work #!:strength +33 >0 use cdrom # .cso files 0 string CISO Compressed ISO CD image # cramfs filesystem - russell@coker.com.au 0 lelong 0x28cd3d45 Linux Compressed ROM File System data, little endian >4 lelong x size %u >8 lelong &1 version #2 >8 lelong &2 sorted_dirs >8 lelong &4 hole_support >32 lelong x CRC 0x%x, >36 lelong x edition %u, >40 lelong x %u blocks, >44 lelong x %u files 0 belong 0x28cd3d45 Linux Compressed ROM File System data, big endian >4 belong x size %u >8 belong &1 version #2 >8 belong &2 sorted_dirs >8 belong &4 hole_support >32 belong x CRC 0x%x, >36 belong x edition %u, >40 belong x %u blocks, >44 belong x %u files # reiserfs - russell@coker.com.au 0x10034 string ReIsErFs ReiserFS V3.5 0x10034 string ReIsEr2Fs ReiserFS V3.6 0x10034 string ReIsEr3Fs ReiserFS V3.6.19 >0x1002c leshort x block size %d >0x10032 leshort &2 (mounted or unclean) >0x10000 lelong x num blocks %d >0x10040 lelong 1 tea hash >0x10040 lelong 2 yura hash >0x10040 lelong 3 r5 hash # JFFS - russell@coker.com.au 0 lelong 0x34383931 Linux Journalled Flash File system, little endian 0 belong 0x34383931 Linux Journalled Flash File system, big endian # EST flat binary format (which isn't, but anyway) # From: Mark Brown 0 string ESTFBINR EST flat binary # Aculab VoIP firmware # From: Mark Brown 0 string VoIP\ Startup\ and Aculab VoIP firmware >35 string x format %s # From: Mark Brown [old] # From: Behan Webster 0 belong 0x27051956 u-boot legacy uImage, >32 string x %s, >28 byte 0 Invalid os/ >28 byte 1 OpenBSD/ >28 byte 2 NetBSD/ >28 byte 3 FreeBSD/ >28 byte 4 4.4BSD/ >28 byte 5 Linux/ >28 byte 6 SVR4/ >28 byte 7 Esix/ >28 byte 8 Solaris/ >28 byte 9 Irix/ >28 byte 10 SCO/ >28 byte 11 Dell/ >28 byte 12 NCR/ >28 byte 13 LynxOS/ >28 byte 14 VxWorks/ >28 byte 15 pSOS/ >28 byte 16 QNX/ >28 byte 17 Firmware/ >28 byte 18 RTEMS/ >28 byte 19 ARTOS/ >28 byte 20 Unity OS/ >28 byte 21 INTEGRITY/ >29 byte 0 \bInvalid CPU, >29 byte 1 \bAlpha, >29 byte 2 \bARM, >29 byte 3 \bIntel x86, >29 byte 4 \bIA64, >29 byte 5 \bMIPS, >29 byte 6 \bMIPS 64-bit, >29 byte 7 \bPowerPC, >29 byte 8 \bIBM S390, >29 byte 9 \bSuperH, >29 byte 10 \bSparc, >29 byte 11 \bSparc 64-bit, >29 byte 12 \bM68K, >29 byte 13 \bNios-32, >29 byte 14 \bMicroBlaze, >29 byte 15 \bNios-II, >29 byte 16 \bBlackfin, >29 byte 17 \bAVR32, >29 byte 18 \bSTMicroelectronics ST200, >30 byte 0 Invalid Image >30 byte 1 Standalone Program >30 byte 2 OS Kernel Image >30 byte 3 RAMDisk Image >30 byte 4 Multi-File Image >30 byte 5 Firmware Image >30 byte 6 Script File >30 byte 7 Filesystem Image (any type) >30 byte 8 Binary Flat Device Tree BLOB >31 byte 0 (Not compressed), >31 byte 1 (gzip), >31 byte 2 (bzip2), >31 byte 3 (lzma), >12 belong x %d bytes, >8 bedate x %s, >16 belong x Load Address: 0x%08X, >20 belong x Entry Point: 0x%08X, >4 belong x Header CRC: 0x%08X, >24 belong x Data CRC: 0x%08X # JFFS2 file system 0 leshort 0x1984 Linux old jffs2 filesystem data little endian 0 leshort 0x1985 Linux jffs2 filesystem data little endian # Squashfs 0 string sqsh Squashfs filesystem, big endian, >28 beshort x version %d. >30 beshort x \b%d, >28 beshort <3 >>8 belong x %d bytes, >28 beshort >2 >>28 beshort <4 >>>63 bequad x %lld bytes, >>28 beshort >3 >>>40 bequad x %lld bytes, #>>67 belong x %d bytes, >4 belong x %d inodes, >28 beshort <2 >>32 beshort x blocksize: %d bytes, >28 beshort >1 >>28 beshort <4 >>>51 belong x blocksize: %d bytes, >>28 beshort >3 >>>12 belong x blocksize: %d bytes, >28 beshort <4 >>39 bedate x created: %s >28 beshort >3 >>8 bedate x created: %s 0 string hsqs Squashfs filesystem, little endian, >28 leshort x version %d. >30 leshort x \b%d, >28 leshort <3 >>8 lelong x %d bytes, >28 leshort >2 >>28 leshort <4 >>>63 lequad x %lld bytes, >>28 leshort >3 >>>40 lequad x %lld bytes, #>>63 lelong x %d bytes, >4 lelong x %d inodes, >28 leshort <2 >>32 leshort x blocksize: %d bytes, >28 leshort >1 >>28 leshort <4 >>>51 lelong x blocksize: %d bytes, >>28 leshort >3 >>>12 lelong x blocksize: %d bytes, >28 leshort <4 >>39 ledate x created: %s >28 leshort >3 >>8 ledate x created: %s # AFS Dump Magic # From: Ty Sarna 0 string \x01\xb3\xa1\x13\x22 AFS Dump >&0 belong x (v%d) >>&0 byte 0x76 >>>&0 belong x Vol %d, >>>>&0 byte 0x6e >>>>>&0 string x %s >>>>>>&1 byte 0x74 >>>>>>>&0 beshort 2 >>>>>>>>&4 bedate x on: %s >>>>>>>>&0 bedate =0 full dump >>>>>>>>&0 bedate !0 incremental since: %s #---------------------------------------------------------- #delta ISO Daniel Novotny (dnovotny@redhat.com) 0 string DISO Delta ISO data !:strength +50 >4 belong x version %d # VMS backup savesets - gerardo.cacciari@gmail.com # 4 string \x01\x00\x01\x00\x01\x00 >(0.s+16) string \x01\x01 >>&(&0.b+8) byte 0x42 OpenVMS backup saveset data >>>40 lelong x (block size %d, >>>49 string >\0 original name '%s', >>>2 short 1024 VAX generated) >>>2 short 2048 AXP generated) >>>2 short 4096 I64 generated) # Summary: Oracle Clustered Filesystem # Created by: Aaron Botsis 8 string OracleCFS Oracle Clustered Filesystem, >4 long x rev %d >0 long x \b.%d, >560 string x label: %.64s, >136 string x mountpoint: %.128s # Summary: Oracle ASM tagged volume # Created by: Aaron Botsis 32 string ORCLDISK Oracle ASM Volume, >40 string x Disk Name: %0.12s 32 string ORCLCLRD Oracle ASM Volume (cleared), >40 string x Disk Name: %0.12s # Oracle Clustered Filesystem - Aaron Botsis 8 string OracleCFS Oracle Clustered Filesystem, >4 long x rev %d >0 long x \b.%d, >560 string x label: %.64s, >136 string x mountpoint: %.128s # Oracle ASM tagged volume - Aaron Botsis 32 string ORCLDISK Oracle ASM Volume, >40 string x Disk Name: %0.12s 32 string ORCLCLRD Oracle ASM Volume (cleared), >40 string x Disk Name: %0.12s # Compaq/HP RILOE floppy image # From: Dirk Jagdmann 0 string CPQRFBLO Compaq/HP RILOE floppy image #------------------------------------------------------------------------------ # Files-11 On-Disk Structure (File system for various RSX-11 and VMS flavours). # These bits come from LBN 1 (home block) of ODS-1, ODS-2 and ODS-5 volumes, # which is mapped to VBN 2 of [000000]INDEXF.SYS;1 - gerardo.cacciari@gmail.com # 1008 string DECFILE11 Files-11 On-Disk Structure >525 byte x (ODS-%d); >1017 string A RSX-11, VAX/VMS or OpenVMS VAX file system; >1017 string B >>525 byte 2 VAX/VMS or OpenVMS file system; >>525 byte 5 OpenVMS Alpha or Itanium file system; >984 string x volume label is '%-12.12s' # From: Thomas Klausner # http://filext.com/file-extension/DAA # describes the daa file format. The magic would be: 0 string DAA\x0\x0\x0\x0\x0 PowerISO Direct-Access-Archive # From Albert Cahalan # really le32 operation,destination,payloadsize (but quite predictable) # 01 00 00 00 00 00 00 c0 00 02 00 00 0 string \1\0\0\0\0\0\0\300\0\2\0\0 Marvell Libertas firmware # From Eric Sandeen # GFS2 0x10000 belong 0x01161970 >0x10018 belong 0x0000051d GFS1 Filesystem >>0x10024 belong x (blocksize %d, >>0x10060 string >\0 lockproto %s) >0x10018 belong 0x00000709 GFS2 Filesystem >>0x10024 belong x (blocksize %d, >>0x10060 string >\0 lockproto %s) # BTRFS 0x10040 string _BHRfS_M BTRFS Filesystem >0x1012b string >\0 (label "%s", >0x10090 lelong x sectorsize %d, >0x10094 lelong x nodesize %d, >0x10098 lelong x leafsize %d) # dvdisaster's .ecc # From: "Nelson A. de Oliveira" 0 string *dvdisaster* dvdisaster error correction file # xfs metadump image # mb_magic XFSM at 0; superblock magic XFSB at 1 << mb_blocklog # but can we do the << ? For now it's always 512 (0x200) anyway. 0 string XFSM >0x200 string XFSB XFS filesystem metadump image # Type: CROM filesystem # From: Werner Fink 0 string CROMFS CROMFS >6 string >\0 \b version %2.2s, >8 ulequad >0 \b block data at %lld, >16 ulequad >0 \b fblock table at %lld, >24 ulequad >0 \b inode table at %lld, >32 ulequad >0 \b root at %lld, >40 ulelong >0 \b fblock size = %d, >44 ulelong >0 \b block size = %d, >48 ulequad >0 \b bytes = %lld # Type: xfs metadump image # From: Daniel Novotny # mb_magic XFSM at 0; superblock magic XFSB at 1 << mb_blocklog # but can we do the << ? For now it's always 512 (0x200) anyway. 0 string XFSM >0x200 string XFSB XFS filesystem metadump image # Type: delta ISO # From: Daniel Novotny 0 string DISO Delta ISO data, >4 belong x version %d # JFS2 (Journaling File System) image. (Old JFS1 has superblock at 0x1000.) # See linux/fs/jfs/jfs_superblock.h for layout; see jfs_filsys.h for flags. # From: Adam Buchbinder 0x8000 string JFS1 # Because it's text-only magic, check a binary value (version) to be sure. # Should always be 2, but mkfs.jfs writes it as 1. Needs to be 2 or 1 to be # mountable. >&0 lelong <3 JFS2 filesystem image # Label is followed by a UUID; we have to limit string length to avoid # appending the UUID in the case of a 16-byte label. >>&144 regex [\x20-\x7E]{1,16} (label "%s") >>&0 lequad x \b, %lld blocks >>&8 lelong x \b, blocksize %d >>&32 lelong&0x00000006 >0 (dirty) >>&36 lelong >0 (compressed) # LFS 0 lelong 0x070162 LFS filesystem image >4 lelong 1 version 1, >>8 lelong x \b blocks %u, >>12 lelong x \b blocks per segment %u, >4 lelong 2 version 2, >>8 lelong x \b fragments %u, >>12 lelong x \b bytes per segment %u, >16 lelong x \b disk blocks %u, >20 lelong x \b block size %u, >24 lelong x \b fragment size %u, >28 lelong x \b fragments per block %u, >32 lelong x \b start for free list %u, >36 lelong x \b number of free blocks %d, >40 lelong x \b number of files %u, >44 lelong x \b blocks available for writing %d, >48 lelong x \b inodes in cache %d, >52 lelong x \b inode file disk address 0x%x, >56 lelong x \b inode file inode number %u, >60 lelong x \b address of last segment written 0x%x, >64 lelong x \b address of next segment to write 0x%x, >68 lelong x \b address of current segment written 0x%x 0 string td\000 floppy image data (TeleDisk, compressed) 0 string TD\000 floppy image data (TeleDisk) 0 string CQ\024 floppy image data (CopyQM, >16 leshort x %d sectors, >18 leshort x %d heads.) 0 string ACT\020Apricot\020disk\020image\032\004 floppy image data (ApriDisk) 0 beshort 0xAA58 floppy image data (IBM SaveDskF, old) 0 beshort 0xAA59 floppy image data (IBM SaveDskF) 0 beshort 0xAA5A floppy image data (IBM SaveDskF, compressed) 0 string \074CPM_Disk\076 disk image data (YAZE) # ReFS # Richard W.M. Jones 0 string \0\0\0ReFS\0 ReFS filesystem image # EFW encase image file format: # Gregoire Passault # http://www.forensicswiki.org/wiki/Encase_image_file_format 0 string EVF\x09\x0d\x0a\xff\x00 EWF/Expert Witness/EnCase image file format # UBIfs # Linux kernel sources: fs/ubifs/ubifs-media.h 0 lelong 0x06101831 >0x16 leshort 0 UBIfs image >0x08 lequad x \b, sequence number %llu >0x10 leshort x \b, length %u >0x04 lelong x \b, CRC 0x%08x 0 lelong 0x23494255 >0x04 leshort <2 >0x05 string \0\0\0 >0x1c string \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0 >0x04 leshort x UBI image, version %u # NEC PC-88 2D disk image # From Fabio R. Schmidlin 0x20 ulelong&0xFFFFFEFF 0x2A0 >0x10 string \0\0\0\0\0\0\0\0\0\0 >>0x280 string \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0 >>>0x1A ubyte&0xEF 0 >>>>0x1B ubyte&0x8F 0 >>>>>0x1B ubyte&70 <0x40 >>>>>>0x1C ulelong >0x21 >>>>>>>0 regex [[:print:]]* NEC PC-88 disk image, name=%s >>>>>>>>0x1B ubyte 0 \b, media=2D >>>>>>>>0x1B ubyte 0x10 \b, media=2DD >>>>>>>>0x1B ubyte 0x20 \b, media=2HD >>>>>>>>0x1B ubyte 0x30 \b, media=1D >>>>>>>>0x1B ubyte 0x40 \b, media=1DD >>>>>>>>0x1A ubyte 0x10 \b, write-protected diff --git a/contrib/file/magic/Magdir/gnu b/contrib/file/magic/Magdir/gnu index e4a0a16aa43e..c94cefc5c3ff 100644 --- a/contrib/file/magic/Magdir/gnu +++ b/contrib/file/magic/Magdir/gnu @@ -1,83 +1,85 @@ #------------------------------------------------------------------------------ -# $File: gnu,v 1.15 2014/02/06 14:21:02 christos Exp $ +# $File: gnu,v 1.16 2015/04/19 22:59:25 christos Exp $ # gnu: file(1) magic for various GNU tools # # GNU nlsutils message catalog file format # # GNU message catalog (.mo and .gmo files) 0 string \336\22\4\225 GNU message catalog (little endian), >6 leshort x revision %d. >4 leshort >0 \b%d, >>8 lelong x %d messages, >>36 lelong x %d sysdep messages >4 leshort =0 \b%d, >>8 lelong x %d messages 0 string \225\4\22\336 GNU message catalog (big endian), >4 beshort x revision %d. >6 beshort >0 \b%d, >>8 belong x %d messages, >>36 belong x %d sysdep messages >6 beshort =0 \b%d, >>8 belong x %d messages # GnuPG # The format is very similar to pgp 0 string \001gpg GPG key trust database >4 byte x version %d # Note: magic.mime had 0x8501 for the next line instead of 0x8502 0 beshort 0x8502 GPG encrypted data !:mime text/PGP # encoding: data # This magic is not particularly good, as the keyrings don't have true # magic. Nevertheless, it covers many keyrings. 0 beshort 0x9901 GPG key public ring !:mime application/x-gnupg-keyring # Symmetric encryption 0 leshort 0x0d8c >4 leshort 0x0203 >>2 leshort 0x0204 GPG symmetrically encrypted data (3DES cipher) >>2 leshort 0x0304 GPG symmetrically encrypted data (CAST5 cipher) >>2 leshort 0x0404 GPG symmetrically encrypted data (BLOWFISH cipher) >>2 leshort 0x0704 GPG symmetrically encrypted data (AES cipher) >>2 leshort 0x0804 GPG symmetrically encrypted data (AES192 cipher) >>2 leshort 0x0904 GPG symmetrically encrypted data (AES256 cipher) >>2 leshort 0x0a04 GPG symmetrically encrypted data (TWOFISH cipher) >>2 leshort 0x0b04 GPG symmetrically encrypted data (CAMELLIA128 cipher) >>2 leshort 0x0c04 GPG symmetrically encrypted data (CAMELLIA192 cipher) >>2 leshort 0x0d04 GPG symmetrically encrypted data (CAMELLIA256 cipher) # GnuPG Keybox file # # From: Philipp Hahn 0 belong 32 >4 byte 1 >>8 string KBXf GPG keybox database >>>5 byte 1 version %d >>>16 bedate x \b, created-at %s >>>20 bedate x \b, last-maintained %s # Gnumeric spreadsheet # This entry is only semi-helpful, as Gnumeric compresses its files, so # they will ordinarily reported as "compressed", but at least -z helps 39 string = # gnu find magic 0 string \0LOCATE GNU findutils locate database data >7 string >\0 \b, format %s >7 string 02 \b (frcode) # Files produced by GNU gettext 0 long 0xDE120495 GNU-format message catalog data 0 long 0x950412DE GNU-format message catalog data # gettext message catalogue -0 regex \^msgid\ GNU gettext message catalogue text +0 search/1024 \nmsgid +>&0 search/1024 \nmsgstr GNU gettext message catalogue text +!:strength +100 !:mime text/x-po diff --git a/contrib/file/magic/Magdir/images b/contrib/file/magic/Magdir/images index 672dd88ba7cf..e6dd414ae879 100644 --- a/contrib/file/magic/Magdir/images +++ b/contrib/file/magic/Magdir/images @@ -1,1101 +1,1123 @@ #------------------------------------------------------------------------------ -# $File: images,v 1.102 2015/01/02 02:36:35 christos Exp $ +# $File: images,v 1.106 2015/02/22 01:26:05 christos Exp $ # images: file(1) magic for image formats (see also "iff", and "c-lang" for # XPM bitmaps) # # originally from jef@helios.ee.lbl.gov (Jef Poskanzer), # additions by janl@ifi.uio.no as well as others. Jan also suggested # merging several one- and two-line files into here. # # little magic: PCX (first byte is 0x0a) # Targa - matches `povray', `ppmtotga' and `xv' outputs # by Philippe De Muyter # at 2, byte ImgType must be 1, 2, 3, 9, 10 or 11 # at 1, byte CoMapType must be 1 if ImgType is 1 or 9, 0 otherwise # at 3, leshort Index is 0 for povray, ppmtotga and xv outputs # `xv' recognizes only a subset of the following (RGB with pixelsize = 24) # `tgatoppm' recognizes a superset (Index may be anything) 1 belong&0xfff7ffff 0x01010000 Targa image data - Map !:strength + 2 >2 byte&8 8 - RLE >12 leshort >0 %d x >14 leshort >0 %d 1 belong&0xfff7ffff 0x00020000 Targa image data - RGB !:strength + 2 >2 byte&8 8 - RLE >12 leshort >0 %d x >14 leshort >0 %d 1 belong&0xfff7ffff 0x00030000 Targa image data - Mono !:strength + 2 >2 byte&8 8 - RLE >12 leshort >0 %d x >14 leshort >0 %d # PBMPLUS images # The next byte following the magic is always whitespace. # strength is changed to try these patterns before "x86 boot sector" +0 name netpbm +>3 regex/s =[0-9]{1,50}\ [0-9]{1,50} Netpbm PPM image data +>>&0 regex =[0-9]{1,50} \b, size = %s x +>>>&0 regex =[0-9]{1,50} \b %s + 0 search/1 P1 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PBM image text ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, bitmap !:strength + 45 !:mime image/x-portable-bitmap + 0 search/1 P2 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PGM image text ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, greymap !:strength + 45 !:mime image/x-portable-greymap + 0 search/1 P3 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PPM image text ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, pixmap !:strength + 45 !:mime image/x-portable-pixmap + + 0 string P4 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PBM "rawbits" image data ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, rawbits, bitmap !:strength + 45 !:mime image/x-portable-bitmap + 0 string P5 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PGM "rawbits" image data ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, rawbits, greymap !:strength + 45 !:mime image/x-portable-greymap + 0 string P6 ->3 regex =[0-9]{0,50}\ [0-9]{0,50} Netpbm PPM "rawbits" image data ->3 regex =[0-9]{1,50}\ \b, size = %sx ->>3 regex =\ [0-9]{1,50} \b%s +>0 use netpbm +>>0 string x \b, rawbits, pixmap !:strength + 45 !:mime image/x-portable-pixmap + 0 string P7 Netpbm PAM image file !:mime image/x-portable-pixmap # From: bryanh@giraffe-data.com (Bryan Henderson) 0 string \117\072 Solitaire Image Recorder format >4 string \013 MGI Type 11 >4 string \021 MGI Type 17 0 string .MDA MicroDesign data >21 byte 48 version 2 >21 byte 51 version 3 0 string .MDP MicroDesign page data >21 byte 48 version 2 >21 byte 51 version 3 # NIFF (Navy Interchange File Format, a modification of TIFF) images # [GRR: this *must* go before TIFF] 0 string IIN1 NIFF image data !:mime image/x-niff # Canon RAW version 1 (CRW) files are a type of Canon Image File Format # (CIFF) file. These are apparently all little-endian. # From: Adam Buchbinder # URL: http://www.sno.phy.queensu.ca/~phil/exiftool/canon_raw.html 0 string II\x1a\0\0\0HEAPCCDR Canon CIFF raw image data !:mime image/x-canon-crw >16 leshort x \b, version %d. >14 leshort x \b%d # Canon RAW version 2 (CR2) files are a kind of TIFF with an extra magic # number. Put this above the TIFF test to make sure we detect them. # These are apparently all little-endian. # From: Adam Buchbinder # URL: http://libopenraw.freedesktop.org/wiki/Canon_CR2 0 string II\x2a\0\x10\0\0\0CR Canon CR2 raw image data !:mime image/x-canon-cr2 >10 byte x \b, version %d. >11 byte x \b%d # Tag Image File Format, from Daniel Quinlan (quinlan@yggdrasil.com) # The second word of TIFF files is the TIFF version number, 42, which has # never changed. The TIFF specification recommends testing for it. 0 string MM\x00\x2a TIFF image data, big-endian !:mime image/tiff >(4.L) use \^tiff_ifd 0 string II\x2a\x00 TIFF image data, little-endian !:mime image/tiff >(4.l) use tiff_ifd 0 name tiff_ifd >0 leshort x \b, direntries=%d >2 use tiff_entry 0 name tiff_entry # NewSubFileType >0 leshort 0xfe >>12 use tiff_entry >0 leshort 0x100 >>4 lelong 1 >>>12 use tiff_entry >>>8 leshort x \b, width=%d >0 leshort 0x101 >>4 lelong 1 >>>8 leshort x \b, height=%d >>>12 use tiff_entry >0 leshort 0x102 >>8 leshort x \b, bps=%d >>12 use tiff_entry >0 leshort 0x103 >>4 lelong 1 \b, compression= >>>8 leshort 1 \bnone >>>8 leshort 2 \bhuffman >>>8 leshort 3 \bbi-level group 3 >>>8 leshort 4 \bbi-level group 4 >>>8 leshort 5 \bLZW >>>8 leshort 6 \bJPEG (old) >>>8 leshort 7 \bJPEG >>>8 leshort 8 \bdeflate >>>8 leshort 9 \bJBIG, ITU-T T.85 >>>8 leshort 0xa \bJBIG, ITU-T T.43 >>>8 leshort 0x7ffe \bNeXT RLE 2-bit >>>8 leshort 0x8005 \bPackBits (Macintosh RLE) >>>8 leshort 0x8029 \bThunderscan RLE >>>8 leshort 0x807f \bRasterPadding (CT or MP) >>>8 leshort 0x8080 \bRLE (Line Work) >>>8 leshort 0x8081 \bRLE (High-Res Cont-Tone) >>>8 leshort 0x8082 \bRLE (Binary Line Work) >>>8 leshort 0x80b2 \bDeflate (PKZIP) >>>8 leshort 0x80b3 \bKodak DCS >>>8 leshort 0x8765 \bJBIG >>>8 leshort 0x8798 \bJPEG2000 >>>8 leshort 0x8799 \bNikon NEF Compressed >>>8 default x >>>>8 leshort x \b(unknown 0x%x) >>>12 use tiff_entry >0 leshort 0x106 \b, PhotometricIntepretation= +>>8 clear x >>8 leshort 0 \bWhiteIsZero >>8 leshort 1 \bBlackIsZero >>8 leshort 2 \bRGB >>8 leshort 3 \bRGB Palette >>8 leshort 4 \bTransparency Mask >>8 leshort 5 \bCMYK >>8 leshort 6 \bYCbCr >>8 leshort 8 \bCIELab +>>8 default x >>>8 leshort x \b(unknown=0x%x) >>12 use tiff_entry # FillOrder >0 leshort 0x10a >>4 lelong 1 >>>12 use tiff_entry # DocumentName >0 leshort 0x10d >>(8.l) string x \b, name=%s >>>12 use tiff_entry # ImageDescription >0 leshort 0x10e >>(8.l) string x \b, description=%s >>>12 use tiff_entry # Make >0 leshort 0x10f >>(8.l) string x \b, manufacturer=%s >>>12 use tiff_entry # Model >0 leshort 0x110 >>(8.l) string x \b, model=%s >>>12 use tiff_entry # StripOffsets >0 leshort 0x111 >>12 use tiff_entry # Orientation >0 leshort 0x112 \b, orientation= >>8 leshort 1 \bupper-left >>8 leshort 3 \blower-right >>8 leshort 6 \bupper-right >>8 leshort 8 \blower-left >>8 leshort 9 \bundefined >>8 default x >>>8 leshort x \b[*%d*] >>12 use tiff_entry # XResolution >0 leshort 0x11a >>8 lelong x \b, xresolution=%d >>12 use tiff_entry # YResolution >0 leshort 0x11b >>8 lelong x \b, yresolution=%d >>12 use tiff_entry # ResolutionUnit >0 leshort 0x128 >>8 leshort x \b, resolutionunit=%d >>12 use tiff_entry # Software >0 leshort 0x131 >>(8.l) string x \b, software=%s >>12 use tiff_entry # Datetime >0 leshort 0x132 >>(8.l) string x \b, datetime=%s >>12 use tiff_entry # HostComputer >0 leshort 0x13c >>(8.l) string x \b, hostcomputer=%s >>12 use tiff_entry # WhitePoint >0 leshort 0x13e >>12 use tiff_entry # PrimaryChromaticities >0 leshort 0x13f >>12 use tiff_entry # YCbCrCoefficients >0 leshort 0x211 >>12 use tiff_entry # YCbCrPositioning >0 leshort 0x213 >>12 use tiff_entry # ReferenceBlackWhite >0 leshort 0x214 >>12 use tiff_entry # Copyright >0 leshort 0x8298 >>(8.l) string x \b, copyright=%s >>12 use tiff_entry # ExifOffset >0 leshort 0x8769 >>12 use tiff_entry # GPS IFD >0 leshort 0x8825 \b, GPS-Data >>12 use tiff_entry #>0 leshort x \b, unknown=0x%x #>>12 use tiff_entry 0 string MM\x00\x2b Big TIFF image data, big-endian !:mime image/tiff 0 string II\x2b\x00 Big TIFF image data, little-endian !:mime image/tiff # PNG [Portable Network Graphics, or "PNG's Not GIF"] images # (Greg Roelofs, newt@uchicago.edu) # (Albert Cahalan, acahalan@cs.uml.edu) # # 137 P N G \r \n ^Z \n [4-byte length] H E A D [HEAD data] [HEAD crc] ... # 0 string \x89PNG\x0d\x0a\x1a\x0a PNG image data !:mime image/png >16 belong x \b, %d x >20 belong x %d, >24 byte x %d-bit >25 byte 0 grayscale, >25 byte 2 \b/color RGB, >25 byte 3 colormap, >25 byte 4 gray+alpha, >25 byte 6 \b/color RGBA, #>26 byte 0 deflate/32K, >28 byte 0 non-interlaced >28 byte 1 interlaced # possible GIF replacements; none yet released! # (Greg Roelofs, newt@uchicago.edu) # # GRR 950115: this was mine ("Zip GIF"): 0 string GIF94z ZIF image (GIF+deflate alpha) !:mime image/x-unknown # # GRR 950115: this is Jeremy Wohl's Free Graphics Format (better): # 0 string FGF95a FGF image (GIF+deflate beta) !:mime image/x-unknown # # GRR 950115: this is Thomas Boutell's Portable Bitmap Format proposal # (best; not yet implemented): # 0 string PBF PBF image (deflate compression) !:mime image/x-unknown # GIF 0 string GIF8 GIF image data !:mime image/gif !:apple 8BIMGIFf >4 string 7a \b, version 8%s, >4 string 9a \b, version 8%s, >6 leshort >0 %d x >8 leshort >0 %d #>10 byte &0x80 color mapped, #>10 byte&0x07 =0x00 2 colors #>10 byte&0x07 =0x01 4 colors #>10 byte&0x07 =0x02 8 colors #>10 byte&0x07 =0x03 16 colors #>10 byte&0x07 =0x04 32 colors #>10 byte&0x07 =0x05 64 colors #>10 byte&0x07 =0x06 128 colors #>10 byte&0x07 =0x07 256 colors # ITC (CMU WM) raster files. It is essentially a byte-reversed Sun raster, # 1 plane, no encoding. 0 string \361\0\100\273 CMU window manager raster image data >4 lelong >0 %d x >8 lelong >0 %d, >12 lelong >0 %d-bit # Magick Image File Format 0 string id=ImageMagick MIFF image data # Artisan 0 long 1123028772 Artisan image data >4 long 1 \b, rectangular 24-bit >4 long 2 \b, rectangular 8-bit with colormap >4 long 3 \b, rectangular 32-bit (24-bit with matte) # FIG (Facility for Interactive Generation of figures), an object-based format 0 search/1 #FIG FIG image text >5 string x \b, version %.3s # PHIGS 0 string ARF_BEGARF PHIGS clear text archive 0 string @(#)SunPHIGS SunPHIGS # version number follows, in the form m.n >40 string SunBin binary >32 string archive archive # GKS (Graphics Kernel System) 0 string GKSM GKS Metafile >24 string SunGKS \b, SunGKS # CGM image files 0 string BEGMF clear text Computer Graphics Metafile # MGR bitmaps (Michael Haardt, u31b3hs@pool.informatik.rwth-aachen.de) 0 string yz MGR bitmap, modern format, 8-bit aligned 0 string zz MGR bitmap, old format, 1-bit deep, 16-bit aligned 0 string xz MGR bitmap, old format, 1-bit deep, 32-bit aligned 0 string yx MGR bitmap, modern format, squeezed # Fuzzy Bitmap (FBM) images 0 string %bitmap\0 FBM image data >30 long 0x31 \b, mono >30 long 0x33 \b, color # facsimile data 1 string PC\ Research,\ Inc group 3 fax data >29 byte 0 \b, normal resolution (204x98 DPI) >29 byte 1 \b, fine resolution (204x196 DPI) # From: Herbert Rosmanith 0 string Sfff structured fax file # From: Joerg Jenderek # most files with the extension .EPA and some with .BMP 0 string \x11\x06 Award BIOS Logo, 136 x 84 !:mime image/x-award-bioslogo 0 string \x11\x09 Award BIOS Logo, 136 x 126 !:mime image/x-award-bioslogo #0 string \x07\x1f BIOS Logo corrupted? # http://www.blackfiveservices.co.uk/awbmtools.shtml # http://biosgfx.narod.ru/v3/ # http://biosgfx.narod.ru/abr-2/ 0 string AWBM >4 leshort <1981 Award BIOS bitmap !:mime image/x-award-bmp # image width is a multiple of 4 >>4 leshort&0x0003 0 >>>4 leshort x \b, %d >>>6 leshort x x %d >>4 leshort&0x0003 >0 \b, >>>4 leshort&0x0003 =1 >>>>4 leshort x %d+3 >>>4 leshort&0x0003 =2 >>>>4 leshort x %d+2 >>>4 leshort&0x0003 =3 >>>>4 leshort x %d+1 >>>6 leshort x x %d # at offset 8 starts imagedata followed by "RGB " marker # PC bitmaps (OS/2, Windows BMP files) (Greg Roelofs, newt@uchicago.edu) # http://en.wikipedia.org/wiki/BMP_file_format#DIB_header_.\ # 28bitmap_information_header.29 0 string BM >14 leshort 12 PC bitmap, OS/2 1.x format !:mime image/x-ms-bmp >>18 leshort x \b, %d x >>20 leshort x %d >14 leshort 64 PC bitmap, OS/2 2.x format !:mime image/x-ms-bmp >>18 leshort x \b, %d x >>20 leshort x %d >14 leshort 40 PC bitmap, Windows 3.x format !:mime image/x-ms-bmp >>18 lelong x \b, %d x >>22 lelong x %d x >>28 leshort x %d >14 leshort 124 PC bitmap, Windows 98/2000 and newer format !:mime image/x-ms-bmp >>18 lelong x \b, %d x >>22 lelong x %d x >>28 leshort x %d >14 leshort 108 PC bitmap, Windows 95/NT4 and newer format !:mime image/x-ms-bmp >>18 lelong x \b, %d x >>22 lelong x %d x >>28 leshort x %d >14 leshort 128 PC bitmap, Windows NT/2000 format !:mime image/x-ms-bmp >>18 lelong x \b, %d x >>22 lelong x %d x >>28 leshort x %d # Too simple - MPi #0 string IC PC icon data #0 string PI PC pointer image data #0 string CI PC color icon data #0 string CP PC color pointer image data # Conflicts with other entries [BABYL] #0 string BA PC bitmap array data # XPM icons (Greg Roelofs, newt@uchicago.edu) 0 search/1 /*\ XPM\ */ X pixmap image text !:mime image/x-xpmi # Utah Raster Toolkit RLE images (janl@ifi.uio.no) 0 leshort 0xcc52 RLE image data, >6 leshort x %d x >8 leshort x %d >2 leshort >0 \b, lower left corner: %d >4 leshort >0 \b, lower right corner: %d >10 byte&0x1 =0x1 \b, clear first >10 byte&0x2 =0x2 \b, no background >10 byte&0x4 =0x4 \b, alpha channel >10 byte&0x8 =0x8 \b, comment >11 byte >0 \b, %d color channels >12 byte >0 \b, %d bits per pixel >13 byte >0 \b, %d color map channels # image file format (Robert Potter, potter@cs.rochester.edu) 0 string Imagefile\ version- iff image data # this adds the whole header (inc. version number), informative but longish >10 string >\0 %s # Sun raster images, from Daniel Quinlan (quinlan@yggdrasil.com) 0 belong 0x59a66a95 Sun raster image data >4 belong >0 \b, %d x >8 belong >0 %d, >12 belong >0 %d-bit, #>16 belong >0 %d bytes long, >20 belong 0 old format, #>20 belong 1 standard, >20 belong 2 compressed, >20 belong 3 RGB, >20 belong 4 TIFF, >20 belong 5 IFF, >20 belong 0xffff reserved for testing, >24 belong 0 no colormap >24 belong 1 RGB colormap >24 belong 2 raw colormap #>28 belong >0 colormap is %d bytes long # SGI image file format, from Daniel Quinlan (quinlan@yggdrasil.com) # # See # http://reality.sgi.com/grafica/sgiimage.html # 0 beshort 474 SGI image data #>2 byte 0 \b, verbatim >2 byte 1 \b, RLE #>3 byte 1 \b, normal precision >3 byte 2 \b, high precision >4 beshort x \b, %d-D >6 beshort x \b, %d x >8 beshort x %d >10 beshort x \b, %d channel >10 beshort !1 \bs >80 string >0 \b, "%s" 0 string IT01 FIT image data >4 belong x \b, %d x >8 belong x %d x >12 belong x %d # 0 string IT02 FIT image data >4 belong x \b, %d x >8 belong x %d x >12 belong x %d # 2048 string PCD_IPI Kodak Photo CD image pack file >0xe02 byte&0x03 0x00 , landscape mode >0xe02 byte&0x03 0x01 , portrait mode >0xe02 byte&0x03 0x02 , landscape mode >0xe02 byte&0x03 0x03 , portrait mode 0 string PCD_OPA Kodak Photo CD overview pack file # FITS format. Jeff Uphoff # FITS is the Flexible Image Transport System, the de facto standard for # data and image transfer, storage, etc., for the astronomical community. # (FITS floating point formats are big-endian.) 0 string SIMPLE\ \ = FITS image data >109 string 8 \b, 8-bit, character or unsigned binary integer >108 string 16 \b, 16-bit, two's complement binary integer >107 string \ 32 \b, 32-bit, two's complement binary integer >107 string -32 \b, 32-bit, floating point, single precision >107 string -64 \b, 64-bit, floating point, double precision # other images 0 string This\ is\ a\ BitMap\ file Lisp Machine bit-array-file # From SunOS 5.5.1 "/etc/magic" - appeared right before Sun raster image # stuff. # 0 beshort 0x1010 PEX Binary Archive # DICOM medical imaging data 128 string DICM DICOM medical imaging data !:mime application/dicom # XWD - X Window Dump file. # As described in /usr/X11R6/include/X11/XWDFile.h # used by the xwd program. # Bradford Castalia, idaeim, 1/01 # updated by Adam Buchbinder, 2/09 # The following assumes version 7 of the format; the first long is the length # of the header, which is at least 25 4-byte longs, and the one at offset 8 # is a constant which is always either 1 or 2. Offset 12 is the pixmap depth, # which is a maximum of 32. 0 belong >100 >8 belong <3 >>12 belong <33 >>>4 belong 7 XWD X Window Dump image data !:mime image/x-xwindowdump >>>>100 string >\0 \b, "%s" >>>>16 belong x \b, %dx >>>>20 belong x \b%dx >>>>12 belong x \b%d # PDS - Planetary Data System # These files use Parameter Value Language in the header section. # Unfortunately, there is no certain magic, but the following # strings have been found to be most likely. 0 string NJPL1I00 PDS (JPL) image data 2 string NJPL1I PDS (JPL) image data 0 string CCSD3ZF PDS (CCSD) image data 2 string CCSD3Z PDS (CCSD) image data 0 string PDS_ PDS image data 0 string LBLSIZE= PDS (VICAR) image data # pM8x: ATARI STAD compressed bitmap format # # from Oskar Schirmer Feb 2, 2001 # p M 8 5/6 xx yy zz data... # Atari ST STAD bitmap is always 640x400, bytewise runlength compressed. # bytes either run horizontally (pM85) or vertically (pM86). yy is the # most frequent byte, xx and zz are runlength escape codes, where xx is # used for runs of yy. # 0 string pM85 Atari ST STAD bitmap image data (hor) >5 byte 0x00 (white background) >5 byte 0xFF (black background) 0 string pM86 Atari ST STAD bitmap image data (vert) >5 byte 0x00 (white background) >5 byte 0xFF (black background) # Gurkan Sengun , www.linuks.mine.nu # http://www.atarimax.com/jindroush.atari.org/afmtatr.html 0 leshort 0x0296 Atari ATR image # XXX: # This is bad magic 0x5249 == 'RI' conflicts with RIFF and other # magic. # SGI RICE image file #0 beshort 0x5249 RICE image #>2 beshort x v%d #>4 beshort x (%d x #>6 beshort x %d) #>8 beshort 0 8 bit #>8 beshort 1 10 bit #>8 beshort 2 12 bit #>8 beshort 3 13 bit #>10 beshort 0 4:2:2 #>10 beshort 1 4:2:2:4 #>10 beshort 2 4:4:4 #>10 beshort 3 4:4:4:4 #>12 beshort 1 RGB #>12 beshort 2 CCIR601 #>12 beshort 3 RP175 #>12 beshort 4 YUV # PCX image files # From: Dan Fandrich # updated by Joerg Jenderek at Feb 2013 by http://de.wikipedia.org/wiki/PCX # http://web.archive.org/web/20100206055706/http://www.qzx.com/pc-gpe/pcx.txt # GRR: original test was still too general as it catches xbase examples T5.DBT,T6.DBT with 0xa000000 # test for bytes 0x0a,version byte (0,2,3,4,5),compression byte flag(0,1), bit depth (>0) of PCX or T5.DBT,T6.DBT 0 ubelong&0xffF8fe00 0x0a000000 # for PCX bit depth > 0 >3 ubyte >0 # test for valid versions >>1 ubyte <6 >>>1 ubyte !1 PCX !:mime image/x-pcx #!:mime image/pcx >>>>1 ubyte 0 ver. 2.5 image data >>>>1 ubyte 2 ver. 2.8 image data, with palette >>>>1 ubyte 3 ver. 2.8 image data, without palette >>>>1 ubyte 4 for Windows image data >>>>1 ubyte 5 ver. 3.0 image data >>>>4 uleshort x bounding box [%d, >>>>6 uleshort x %d] - >>>>8 uleshort x [%d, >>>>10 uleshort x %d], >>>>65 ubyte >1 %d planes each of >>>>3 ubyte x %d-bit >>>>68 byte 1 colour, >>>>68 byte 2 grayscale, # this should not happen >>>>68 default x image, >>>>12 leshort >0 %d x >>>>>14 uleshort x %d dpi, >>>>2 byte 0 uncompressed >>>>2 byte 1 RLE compressed # Adobe Photoshop # From: Asbjoern Sloth Toennesen 0 string 8BPS Adobe Photoshop Image !:mime image/vnd.adobe.photoshop >4 beshort 2 (PSB) >18 belong x \b, %d x >14 belong x %d, >24 beshort 0 bitmap >24 beshort 1 grayscale >>12 beshort 2 with alpha >24 beshort 2 indexed >24 beshort 3 RGB >>12 beshort 4 \bA >24 beshort 4 CMYK >>12 beshort 5 \bA >24 beshort 7 multichannel >24 beshort 8 duotone >24 beshort 9 lab >12 beshort > 1 >>12 beshort x \b, %dx >12 beshort 1 \b, >22 beshort x %d-bit channel >12 beshort > 1 \bs # XV thumbnail indicator (ThMO) 0 string P7\ 332 XV thumbnail image data # NITF is defined by United States MIL-STD-2500A 0 string NITF National Imagery Transmission Format >25 string >\0 dated %.14s # GEM Image: Version 1, Headerlen 8 (Wolfram Kleff) -0 belong 0x00010008 GEM Image data +# Format variations from: Bernd Nuernberger +# See http://fileformats.archiveteam.org/wiki/GEM_Raster +# For variations, also see: +# http://www.seasip.info/Gem/ff_img.html (Ventura) +# http://www.atari-wiki.com/?title=IMG_file (XIMG, STTT) +# http://www.fileformat.info/format/gemraster/spec/index.htm (XIMG, STTT) +# http://sylvana.net/1stguide/1STGUIDE.ENG (TIMG) +0 beshort 0x0001 +>2 beshort 0x0008 GEM Image data +>>0 use gem_info +>2 beshort 0x0009 GEM Image data (Ventura) +>>0 use gem_info +16 string XIMG\0 GEM XIMG Image data +>0 use gem_info +16 string STTT\0\x10 GEM STTT Image data +>0 use gem_info +16 string TIMG\0 GEM TIMG Image data +>0 use gem_info + +0 name gem_info >12 beshort x %d x >14 beshort x %d, >4 beshort x %d planes, >8 beshort x %d x >10 beshort x %d pixelsize # GEM Metafile (Wolfram Kleff) 0 lelong 0x0018FFFF GEM Metafile data >4 leshort x version %d # # SMJPEG. A custom Motion JPEG format used by Loki Entertainment # Software Torbjorn Andersson . # 0 string \0\nSMJPEG SMJPEG >8 belong x %d.x data # According to the specification you could find any number of _TXT # headers here, but I can't think of any way of handling that. None of # the SMJPEG files I tried it on used this feature. Even if such a # file is encountered the output should still be reasonable. >16 string _SND \b, >>24 beshort >0 %d Hz >>26 byte 8 8-bit >>26 byte 16 16-bit >>28 string NONE uncompressed # >>28 string APCM ADPCM compressed >>27 byte 1 mono >>28 byte 2 stereo # Help! Isn't there any way to avoid writing this part twice? >>32 string _VID \b, # >>>48 string JFIF JPEG >>>40 belong >0 %d frames >>>44 beshort >0 (%d x >>>46 beshort >0 %d) >16 string _VID \b, # >>32 string JFIF JPEG >>24 belong >0 %d frames >>28 beshort >0 (%d x >>30 beshort >0 %d) 0 string Paint\ Shop\ Pro\ Image\ File Paint Shop Pro Image File # "thumbnail file" (icon) # descended from "xv", but in use by other applications as well (Wolfram Kleff) 0 string P7\ 332 XV "thumbnail file" (icon) data # taken from fkiss: ( ?) 0 string KiSS KISS/GS >4 byte 16 color >>5 byte x %d bit >>8 leshort x %d colors >>10 leshort x %d groups >4 byte 32 cell >>5 byte x %d bit >>8 leshort x %d x >>10 leshort x %d >>12 leshort x +%d >>14 leshort x +%d # Webshots (www.webshots.com), by John Harrison 0 string C\253\221g\230\0\0\0 Webshots Desktop .wbz file # Hercules DASD image files # From Jan Jaeger 0 string CKD_P370 Hercules CKD DASD image file >8 long x \b, %d heads per cylinder >12 long x \b, track size %d bytes >16 byte x \b, device type 33%2.2X 0 string CKD_C370 Hercules compressed CKD DASD image file >8 long x \b, %d heads per cylinder >12 long x \b, track size %d bytes >16 byte x \b, device type 33%2.2X 0 string CKD_S370 Hercules CKD DASD shadow file >8 long x \b, %d heads per cylinder >12 long x \b, track size %d bytes >16 byte x \b, device type 33%2.2X # Squeak images and programs - etoffi@softhome.net 0 string \146\031\0\0 Squeak image data 0 search/1 'From\040Squeak Squeak program text # partimage: file(1) magic for PartImage files (experimental, incomplete) # Author: Hans-Joachim Baader 0 string PaRtImAgE-VoLuMe PartImage >0x0020 string 0.6.1 file version %s >>0x0060 lelong >-1 volume %d #>>0x0064 8 byte identifier #>>0x007c reserved >>0x0200 string >\0 type %s >>0x1400 string >\0 device %s, >>0x1600 string >\0 original filename %s, # Some fields omitted >>0x2744 lelong 0 not compressed >>0x2744 lelong 1 gzip compressed >>0x2744 lelong 2 bzip2 compressed >>0x2744 lelong >2 compressed with unknown algorithm >0x0020 string >0.6.1 file version %s >0x0020 string <0.6.1 file version %s # DCX is multi-page PCX, using a simple header of up to 1024 # offsets for the respective PCX components. # From: Joerg Wunsch 0 lelong 987654321 DCX multi-page PCX image data # Simon Walton # Kodak Cineon format for scanned negatives # http://www.kodak.com/US/en/motion/support/dlad/ 0 lelong 0xd75f2a80 Cineon image data >200 belong >0 \b, %d x >204 belong >0 %d # Bio-Rad .PIC is an image format used by microscope control systems # and related image processing software used by biologists. # From: Vebjorn Ljosa # BOOL values are two-byte integers; use them to rule out false positives. # http://web.archive.org/web/20050317223257/www.cs.ubc.ca/spider/ladic/text/biorad.txt # Samples: http://www.loci.wisc.edu/software/sample-data 14 leshort <2 >62 leshort <2 >>54 leshort 12345 Bio-Rad .PIC Image File >>>0 leshort >0 %d x >>>2 leshort >0 %d, >>>4 leshort =1 1 image in file >>>4 leshort >1 %d images in file # From Jan "Yenya" Kasprzak # The description of *.mrw format can be found at # http://www.dalibor.cz/minolta/raw_file_format.htm 0 string \000MRM Minolta Dimage camera raw image data # Summary: DjVu image / document # Extension: .djvu # Reference: http://djvu.org/docs/DjVu3Spec.djvu # Submitted by: Stephane Loeuillet # Modified by (1): Abel Cheung 0 string AT&TFORM >12 string DJVM DjVu multiple page document !:mime image/vnd.djvu >12 string DJVU DjVu image or single page document !:mime image/vnd.djvu >12 string DJVI DjVu shared document !:mime image/vnd.djvu >12 string THUM DjVu page thumbnails !:mime image/vnd.djvu # Originally by Marc Espie # Modified by Robert Minsk # http://www.openexr.com/openexrfilelayout.pdf 0 lelong 20000630 OpenEXR image data, !:mime image/x-exr >4 lelong&0x000000ff x version %d, >4 lelong ^0x00000200 storage: scanline >4 lelong &0x00000200 storage: tiled >8 search/0x1000 compression\0 \b, compression: >>&16 byte 0 none >>&16 byte 1 rle >>&16 byte 2 zips >>&16 byte 3 zip >>&16 byte 4 piz >>&16 byte 5 pxr24 >>&16 byte 6 b44 >>&16 byte 7 b44a >>&16 byte >7 unknown >8 search/0x1000 dataWindow\0 \b, dataWindow: >>&10 lelong x (%d >>&14 lelong x %d)- >>&18 lelong x \b(%d >>&22 lelong x %d) >8 search/0x1000 displayWindow\0 \b, displayWindow: >>&10 lelong x (%d >>&14 lelong x %d)- >>&18 lelong x \b(%d >>&22 lelong x %d) >8 search/0x1000 lineOrder\0 \b, lineOrder: >>&14 byte 0 increasing y >>&14 byte 1 decreasing y >>&14 byte 2 random y >>&14 byte >2 unknown # SMPTE Digital Picture Exchange Format, SMPTE DPX # # ANSI/SMPTE 268M-1994, SMPTE Standard for File Format for Digital # Moving-Picture Exchange (DPX), v1.0, 18 February 1994 # Robert Minsk 0 string SDPX DPX image data, big-endian, !:mime image/x-dpx >768 beshort <4 >>772 belong x %dx >>776 belong x \b%d, >768 beshort >3 >>776 belong x %dx >>772 belong x \b%d, >768 beshort 0 left to right/top to bottom >768 beshort 1 right to left/top to bottom >768 beshort 2 left to right/bottom to top >768 beshort 3 right to left/bottom to top >768 beshort 4 top to bottom/left to right >768 beshort 5 top to bottom/right to left >768 leshort 6 bottom to top/left to right >768 leshort 7 bottom to top/right to left # From: Tom Hilinski # http://www.unidata.ucar.edu/packages/netcdf/ 0 string CDF\001 NetCDF Data Format data #----------------------------------------------------------------------- # Hierarchical Data Format, used to facilitate scientific data exchange # specifications at http://hdf.ncsa.uiuc.edu/ 0 belong 0x0e031301 Hierarchical Data Format (version 4) data !:mime application/x-hdf 0 string \211HDF\r\n\032\n Hierarchical Data Format (version 5) data !:mime application/x-hdf 512 string \211HDF\r\n\032\n Hierarchical Data Format (version 5) with 512 bytes user block !:mime application/x-hdf 1024 string \211HDF\r\n\032\n Hierarchical Data Format (version 5) with 1k user block !:mime application/x-hdf 2048 string \211HDF\r\n\032\n Hierarchical Data Format (version 5) with 2k user block !:mime application/x-hdf 4096 string \211HDF\r\n\032\n Hierarchical Data Format (version 5) with 4k user block !:mime application/x-hdf # From: Tobias Burnus # Xara (for a while: Corel Xara) is a graphic package, see # http://www.xara.com/ for Windows and as GPL application for Linux 0 string XARA\243\243 Xara graphics file # http://www.cartesianinc.com/Tech/ 0 string CPC\262 Cartesian Perceptual Compression image !:mime image/x-cpi # From Albert Cahalan # puredigital used it for the CVS disposable camcorder #8 lelong 4 ZBM bitmap image data #>4 leshort x %u x #>6 leshort x %u # From Albert Cahalan # uncompressed 5:6:5 HighColor image for OLPC XO firmware icons 0 string C565 OLPC firmware icon image data >4 leshort x %u x >6 leshort x %u # Applied Images - Image files from Cytovision # Gustavo Junior Alves 0 string \xce\xda\xde\xfa Cytovision Metaphases file 0 string \xed\xad\xef\xac Cytovision Karyotype file 0 string \x0b\x00\x03\x00 Cytovision FISH Probe file 0 string \xed\xfe\xda\xbe Cytovision FLEX file 0 string \xed\xab\xed\xfe Cytovision FLEX file 0 string \xad\xfd\xea\xad Cytovision RATS file # Wavelet Scalar Quantization format used in gray-scale fingerprint images # From Tano M Fotang 0 string \xff\xa0\xff\xa8\x00 Wavelet Scalar Quantization image data # Type: PCO B16 image files # URL: http://www.pco.de/fileadmin/user_upload/db/download/MA_CWDCOPIE_0412b.pdf # From: Florian Philipp # Extension: .b16 # Description: Pixel image format produced by PCO Camware, typically used # together with PCO cameras. # Note: Different versions exist for e.g. 8 bit and 16 bit images. # Documentation is incomplete. 0 string/b PCO- PCO B16 image data >12 lelong x \b, %dx >16 lelong x \b%d >20 lelong 0 \b, short header >20 lelong -1 \b, extended header >>24 lelong 0 \b, grayscale >>>36 lelong 0 linear LUT >>>36 lelong 1 logarithmic LUT >>>28 lelong x [%d >>>32 lelong x \b,%d] >>24 lelong 1 \b, color >>>64 lelong 0 linear LUT >>>64 lelong 1 logarithmic LUT >>>40 lelong x r[%d >>>44 lelong x \b,%d] >>>48 lelong x g[%d >>>52 lelong x \b,%d] >>>56 lelong x b[%d >>>60 lelong x \b,%d] # Polar Monitor Bitmap (.pmb) used as logo for Polar Electro watches # From: Markus Heidelberg 0 string/t [BitmapInfo2] Polar Monitor Bitmap text !:mime image/x-polar-monitor-bitmap # From: Rick Richardson 0 string GARMIN\ BITMAP\ 01 Garmin Bitmap file # Type: Ulead Photo Explorer5 (.pe5) # URL: http://www.jisyo.com/cgibin/view.cgi?EXT=pe5 (Japanese) # From: Simon Horman 0 string IIO2H Ulead Photo Explorer5 # Type: X11 cursor # URL: http://webcvs.freedesktop.org/mime/shared-mime-info/freedesktop.org.xml.in?view=markup # From: Mathias Brodala 0 string Xcur X11 cursor # Type: Olympus ORF raw images. # URL: http://libopenraw.freedesktop.org/wiki/Olympus_ORF # From: Adam Buchbinder 0 string MMOR Olympus ORF raw image data, big-endian !:mime image/x-olympus-orf 0 string IIRO Olympus ORF raw image data, little-endian !:mime image/x-olympus-orf 0 string IIRS Olympus ORF raw image data, little-endian !:mime image/x-olympus-orf # Type: files used in modern AVCHD camcoders to store clip information # Extension: .cpi # From: Alexander Danilov 0 string HDMV0100 AVCHD Clip Information # From: Adam Buchbinder # URL: http://local.wasp.uwa.edu.au/~pbourke/dataformats/pic/ # Radiance HDR; usually has .pic or .hdr extension. 0 string #?RADIANCE\n Radiance HDR image data #!mime image/vnd.radiance # From: Adam Buchbinder # URL: http://www.mpi-inf.mpg.de/resources/pfstools/pfs_format_spec.pdf # Used by the pfstools packages. The regex matches for the image size could # probably use some work. The MIME type is made up; if there's one in # actual common use, it should replace the one below. 0 string PFS1\x0a PFS HDR image data #!mime image/x-pfs >1 regex [0-9]*\ \b, %s >>1 regex \ [0-9]{4} \bx%s # Type: Foveon X3F # URL: http://www.photofo.com/downloads/x3f-raw-format.pdf # From: Adam Buchbinder # Note that the MIME type isn't defined anywhere that I can find; if # there's a canonical type for this format, it should replace this one. 0 string FOVb Foveon X3F raw image data !:mime image/x-x3f >6 leshort x \b, version %d. >4 leshort x \b%d >28 lelong x \b, %dx >32 lelong x \b%d # Paint.NET file # From Adam Buchbinder 0 string PDN3 Paint.NET image data !:mime image/x-paintnet # Not really an image. # From: "Tano M. Fotang" 0 string \x46\x4d\x52\x00 ISO/IEC 19794-2 Format Minutiae Record (FMR) -# WEBP https://developers.google.com/speed/webp/docs/riff_container -#0 string RIFF -#>8 string WEBP Web/P image data -#>>4 lelong x \b, %d bytes - # doc: http://www.shikino.co.jp/eng/products/images/FLOWER.jpg.zip # example: http://www.shikino.co.jp/eng/products/images/FLOWER.wdp.zip 90 bequad 0x574D50484F544F00 JPEG-XR Image >98 byte&0x08 =0x08 \b, hard tiling >99 byte&0x80 =0x80 \b, tiling present >99 byte&0x40 =0x40 \b, codestream present >99 byte&0x38 x \b, spatial xform= >99 byte&0x38 0x00 \bTL >99 byte&0x38 0x08 \bBL >99 byte&0x38 0x10 \bTR >99 byte&0x38 0x18 \bBR >99 byte&0x38 0x20 \bBT >99 byte&0x38 0x28 \bRB >99 byte&0x38 0x30 \bLT >99 byte&0x38 0x38 \bLB >100 byte&0x80 =0x80 \b, short header >>102 beshort+1 x \b, %d >>104 beshort+1 x \bx%d >100 byte&0x80 =0x00 \b, long header >>102 belong+1 x \b, %x >>106 belong+1 x \bx%x >101 beshort&0xf x \b, bitdepth= >>101 beshort&0xf 0x0 \b1-WHITE=1 >>101 beshort&0xf 0x1 \b8 >>101 beshort&0xf 0x2 \b16 >>101 beshort&0xf 0x3 \b16-SIGNED >>101 beshort&0xf 0x4 \b16-FLOAT >>101 beshort&0xf 0x5 \b(reserved 5) >>101 beshort&0xf 0x6 \b32-SIGNED >>101 beshort&0xf 0x7 \b32-FLOAT >>101 beshort&0xf 0x8 \b5 >>101 beshort&0xf 0x9 \b10 >>101 beshort&0xf 0xa \b5-6-5 >>101 beshort&0xf 0xb \b(reserved %d) >>101 beshort&0xf 0xc \b(reserved %d) >>101 beshort&0xf 0xd \b(reserved %d) >>101 beshort&0xf 0xe \b(reserved %d) >>101 beshort&0xf 0xf \b1-BLACK=1 >101 beshort&0xf0 x \b, colorfmt= >>101 beshort&0xf0 0x00 \bYONLY >>101 beshort&0xf0 0x10 \bYUV240 >>101 beshort&0xf0 0x20 \bYWV422 >>101 beshort&0xf0 0x30 \bYWV444 >>101 beshort&0xf0 0x40 \bCMYK >>101 beshort&0xf0 0x50 \bCMYKDIRECT >>101 beshort&0xf0 0x60 \bNCOMPONENT >>101 beshort&0xf0 0x70 \bRGB >>101 beshort&0xf0 0x80 \bRGBE >>101 beshort&0xf0 >0x80 \b(reserved 0x%x) # From: Johan van der Knijff # # BPG (Better Portable Graphics) format # http://bellard.org/bpg/ # http://fileformats.archiveteam.org/wiki/BPG # 0 string \x42\x50\x47\xFB BPG (Better Portable Graphics) !:mime image/bpg diff --git a/contrib/file/magic/Magdir/jpeg b/contrib/file/magic/Magdir/jpeg index cfe897369392..b20b19fc2f24 100644 --- a/contrib/file/magic/Magdir/jpeg +++ b/contrib/file/magic/Magdir/jpeg @@ -1,115 +1,119 @@ #------------------------------------------------------------------------------ -# $File: jpeg,v 1.25 2015/01/02 16:56:50 christos Exp $ +# $File: jpeg,v 1.29 2015/04/10 15:36:02 christos Exp $ # JPEG images # SunOS 5.5.1 had # # 0 string \377\330\377\340 JPEG file # 0 string \377\330\377\356 JPG file # # both of which turn into "JPEG image data" here. # 0 beshort 0xffd8 JPEG image data !:mime image/jpeg !:apple 8BIMJPEG -!:strength +2 +!:strength *3 +!:ext jpeg/jpg/jpe/jfif >6 string JFIF \b, JFIF standard # The following added by Erik Rossen 1999-09-06 # in a vain attempt to add image size reporting for JFIF. Note that these # tests are not fool-proof since some perfectly valid JPEGs are currently # impossible to specify in magic(4) format. # First, a little JFIF version info: >>11 byte x \b %d. >>12 byte x \b%02d # Next, the resolution or aspect ratio of the image: >>13 byte 0 \b, aspect ratio >>13 byte 1 \b, resolution (DPI) >>13 byte 2 \b, resolution (DPCM) >>14 beshort x \b, density %dx >>16 beshort x \b%d >>4 beshort x \b, segment length %d # Next, show thumbnail info, if it exists: >>18 byte !0 \b, thumbnail %dx >>>19 byte x \b%d >6 string Exif \b, Exif standard: [ >>12 indirect/r x >>12 string x \b] # Jump to the first segment >(4.S+4) use jpeg_segment # This uses recursion... 0 name jpeg_segment >0 beshort 0xFFFE ->>(2.S+2) use jpeg_segment +# Recursion handled by FFE0 +#>>(2.S+2) use jpeg_segment >>2 pstring/HJ x \b, comment: "%s" >0 beshort 0xFFC0 >>(2.S+2) use jpeg_segment >>4 byte x \b, baseline, precision %d >>7 beshort x \b, %dx >>5 beshort x \b%d >>9 byte x \b, frames %d >0 beshort 0xFFC1 >>(2.S+2) use jpeg_segment >>4 byte x \b, extended sequential, precision %d >>7 beshort x \b, %dx >>5 beshort x \b%d >>9 byte x \b, frames %d >0 beshort 0xFFC2 >>(2.S+2) use jpeg_segment >>4 byte x \b, progressive, precision %d >>7 beshort x \b, %dx >>5 beshort x \b%d >>9 byte x \b, frames %d # Define Huffman Tables >0 beshort 0xFFC4 >>(2.S+2) use jpeg_segment >0 beshort 0xFFE1 +# Recursion handled by FFE0 #>>(2.S+2) use jpeg_segment >>4 string Exif \b, Exif Standard: [ >>>10 indirect/r x >>>10 string x \b] # Application specific markers >0 beshort&0xFFE0 =0xFFE0 >>(2.S+2) use jpeg_segment # DB: Define Quantization tables # DD: Define Restart interval [XXX: wrong here, it is 4 bytes] # D8: Start of image # D9: End of image # Dn: Restart >0 beshort&0xFFD0 =0xFFD0 ->>(2.S+2) use jpeg_segment +>>0 beshort&0xFFE0 !0xFFE0 +>>>(2.S+2) use jpeg_segment #>0 beshort x unknown 0x%x #>>(2.S+2) use jpeg_segment # HSI is Handmade Software's proprietary JPEG encoding scheme 0 string hsi1 JPEG image data, HSI proprietary # From: David Santinoli 0 string \x00\x00\x00\x0C\x6A\x50\x20\x20\x0D\x0A\x87\x0A JPEG 2000 # From: Johan van der Knijff # Added sub-entries for JP2, JPX, JPM and MJ2 formats; added mimetypes # https://github.com/bitsgalore/jp2kMagic # # Now read value of 'Brand' field, which yields a few possibilities: >20 string \x6a\x70\x32\x20 Part 1 (JP2) !:mime image/jp2 >20 string \x6a\x70\x78\x20 Part 2 (JPX) !:mime image/jpx >20 string \x6a\x70\x6d\x20 Part 6 (JPM) !:mime image/jpm >20 string \x6d\x6a\x70\x32 Part 3 (MJ2) !:mime video/mj2 # Type: JPEG 2000 codesream # From: Mathieu Malaterre 0 belong 0xff4fff51 JPEG 2000 codestream 45 beshort 0xff52 diff --git a/contrib/file/magic/Magdir/linux b/contrib/file/magic/Magdir/linux index d3f6a9d6d71f..44aaa666a312 100644 --- a/contrib/file/magic/Magdir/linux +++ b/contrib/file/magic/Magdir/linux @@ -1,434 +1,459 @@ #------------------------------------------------------------------------------ -# $File: linux,v 1.59 2014/11/03 21:03:36 christos Exp $ +# $File: linux,v 1.62 2015/05/03 13:06:36 christos Exp $ # linux: file(1) magic for Linux files # # Values for Linux/i386 binaries, from Daniel Quinlan # The following basic Linux magic is useful for reference, but using # "long" magic is a better practice in order to avoid collisions. # # 2 leshort 100 Linux/i386 # >0 leshort 0407 impure executable (OMAGIC) # >0 leshort 0410 pure executable (NMAGIC) # >0 leshort 0413 demand-paged executable (ZMAGIC) # >0 leshort 0314 demand-paged executable (QMAGIC) # 0 lelong 0x00640107 Linux/i386 impure executable (OMAGIC) >16 lelong 0 \b, stripped 0 lelong 0x00640108 Linux/i386 pure executable (NMAGIC) >16 lelong 0 \b, stripped 0 lelong 0x0064010b Linux/i386 demand-paged executable (ZMAGIC) >16 lelong 0 \b, stripped 0 lelong 0x006400cc Linux/i386 demand-paged executable (QMAGIC) >16 lelong 0 \b, stripped # 0 string \007\001\000 Linux/i386 object file >20 lelong >0x1020 \b, DLL library # Linux-8086 stuff: 0 string \01\03\020\04 Linux-8086 impure executable >28 long !0 not stripped 0 string \01\03\040\04 Linux-8086 executable >28 long !0 not stripped # 0 string \243\206\001\0 Linux-8086 object file # 0 string \01\03\020\20 Minix-386 impure executable >28 long !0 not stripped 0 string \01\03\040\20 Minix-386 executable >28 long !0 not stripped 0 string \01\03\04\20 Minix-386 NSYM/GNU executable >28 long !0 not stripped # core dump file, from Bill Reynolds 216 lelong 0421 Linux/i386 core file !:strength / 2 >220 string >\0 of '%s' >200 lelong >0 (signal %d) # # LILO boot/chain loaders, from Daniel Quinlan # this can be overridden by the DOS executable (COM) entry 2 string LILO Linux/i386 LILO boot/chain loader # # Linux make config build file, from Ole Aamot # Updated by Ken Sharp 28 string make\ config Linux make config build file (old) 49 search/70 Kernel\ Configuration Linux make config build file # # PSF fonts, from H. Peter Anvin # Updated by Adam Buchbinder # See: http://www.win.tue.nl/~aeb/linux/kbd/font-formats-1.html 0 leshort 0x0436 Linux/i386 PC Screen Font v1 data, >2 byte&0x01 0 256 characters, >2 byte&0x01 !0 512 characters, >2 byte&0x02 0 no directory, >2 byte&0x02 !0 Unicode directory, >3 byte >0 8x%d 0 string \x72\xb5\x4a\x86\x00\x00 Linux/i386 PC Screen Font v2 data, >16 lelong x %d characters, >12 lelong&0x01 0 no directory, >12 lelong&0x01 !0 Unicode directory, >24 lelong x %d >28 lelong x \bx%d # Linux swap file, from Daniel Quinlan 4086 string SWAP-SPACE Linux/i386 swap file # From: Jeff Bailey # Linux swap file with swsusp1 image, from Jeff Bailey 4076 string SWAPSPACE2S1SUSPEND Linux/i386 swap file (new style) with SWSUSP1 image # From: James Hunt 4076 string SWAPSPACE2LINHIB0001 Linux/i386 swap file (new style) (compressed hibernate) # according to man page of mkswap (8) March 1999 # volume label and UUID Russell Coker # http://etbe.coker.com.au/2008/07/08/label-vs-uuid-vs-device/ 4086 string SWAPSPACE2 Linux/i386 swap file (new style), >0x400 long x version %d (4K pages), >0x404 long x size %d pages, >1052 string \0 no label, >1052 string >\0 LABEL=%s, >0x40c belong x UUID=%08x >0x410 beshort x \b-%04x >0x412 beshort x \b-%04x >0x414 beshort x \b-%04x >0x416 belong x \b-%08x >0x41a beshort x \b%04x # From Daniel Novotny # swap file for PowerPC 65526 string SWAPSPACE2 Linux/ppc swap file 16374 string SWAPSPACE2 Linux/ia64 swap file # # Linux kernel boot images, from Albert Cahalan # and others such as Axel Kohlmeyer # and Nicolas Lichtmaier # All known start with: b8 c0 07 8e d8 b8 00 90 8e c0 b9 00 01 29 f6 29 # Linux kernel boot images (i386 arch) (Wolfram Kleff) 514 string HdrS Linux kernel !:strength + 55 >510 leshort 0xAA55 x86 boot executable >>518 leshort >0x1ff >>>529 byte 0 zImage, >>>529 byte 1 bzImage, >>>526 lelong >0 >>>>(526.s+0x200) string >\0 version %s, >>498 leshort 1 RO-rootFS, >>498 leshort 0 RW-rootFS, >>508 leshort >0 root_dev 0x%X, >>502 leshort >0 swap_dev 0x%X, >>504 leshort >0 RAMdisksize %u KB, >>506 leshort 0xFFFF Normal VGA >>506 leshort 0xFFFE Extended VGA >>506 leshort 0xFFFD Prompt for Videomode >>506 leshort >0 Video mode %d # This also matches new kernels, which were caught above by "HdrS". 0 belong 0xb8c0078e Linux kernel >0x1e3 string Loading version 1.3.79 or older >0x1e9 string Loading from prehistoric times # System.map files - Nicolas Lichtmaier 8 search/1 \ A\ _text Linux kernel symbol map text # LSM entries - Nicolas Lichtmaier 0 search/1 Begin3 Linux Software Map entry text 0 search/1 Begin4 Linux Software Map entry text (new format) # From Matt Zimmerman, enhanced for v3 by Matthew Palmer 0 belong 0x4f4f4f4d User-mode Linux COW file >4 belong <3 \b, version %d >>8 string >\0 \b, backing file %s >4 belong >2 \b, version %d >>32 string >\0 \b, backing file %s ############################################################################ # Linux kernel versions 0 string \xb8\xc0\x07\x8e\xd8\xb8\x00\x90 Linux >497 leshort 0 x86 boot sector >>514 belong 0x8e of a kernel from the dawn of time! >>514 belong 0x908ed8b4 version 0.99-1.1.42 >>514 belong 0x908ed8b8 for memtest86 >497 leshort !0 x86 kernel >>504 leshort >0 RAMdisksize=%u KB >>502 leshort >0 swap=0x%X >>508 leshort >0 root=0x%X >>>498 leshort 1 \b-ro >>>498 leshort 0 \b-rw >>506 leshort 0xFFFF vga=normal >>506 leshort 0xFFFE vga=extended >>506 leshort 0xFFFD vga=ask >>506 leshort >0 vga=%d >>514 belong 0x908ed881 version 1.1.43-1.1.45 >>514 belong 0x15b281cd >>>0xa8e belong 0x55AA5a5a version 1.1.46-1.2.13,1.3.0 >>>0xa99 belong 0x55AA5a5a version 1.3.1,2 >>>0xaa3 belong 0x55AA5a5a version 1.3.3-1.3.30 >>>0xaa6 belong 0x55AA5a5a version 1.3.31-1.3.41 >>>0xb2b belong 0x55AA5a5a version 1.3.42-1.3.45 >>>0xaf7 belong 0x55AA5a5a version 1.3.46-1.3.72 >>514 string HdrS >>>518 leshort >0x1FF >>>>529 byte 0 \b, zImage >>>>529 byte 1 \b, bzImage >>>>(526.s+0x200) string >\0 \b, version %s # Linux boot sector thefts. 0 belong 0xb8c0078e Linux >0x1e6 belong 0x454c4b53 ELKS Kernel >0x1e6 belong !0x454c4b53 style boot sector ############################################################################ # Linux S390 kernel image # Created by: Jan Kaluza 8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390 >0x00010000 search/b/4096 \x00\x0a\x00\x00\x8b\xad\xcc\xcc # 64bit >>&0 string \xc1\x00\xef\xe3\xf0\x68\x00\x00 Z10 64bit kernel >>&0 string \xc1\x00\xef\xc3\x00\x00\x00\x00 Z9-109 64bit kernel >>&0 string \xc0\x00\x20\x00\x00\x00\x00\x00 Z990 64bit kernel >>&0 string \x00\x00\x00\x00\x00\x00\x00\x00 Z900 64bit kernel # 32bit >>&0 string \x81\x00\xc8\x80\x00\x00\x00\x00 Z10 32bit kernel >>&0 string \x81\x00\xc8\x80\x00\x00\x00\x00 Z9-109 32bit kernel >>&0 string \x80\x00\x20\x00\x00\x00\x00\x00 Z990 32bit kernel >>&0 string \x80\x00\x00\x00\x00\x00\x00\x00 Z900 32bit kernel # Linux ARM compressed kernel image # From: Kevin Cernekee 36 lelong 0x016f2818 Linux kernel ARM boot executable zImage (little-endian) 36 belong 0x016f2818 Linux kernel ARM boot executable zImage (big-endian) ############################################################################ # Linux 8086 executable 0 lelong&0xFF0000FF 0xC30000E9 Linux-Dev86 executable, headerless >5 string . >>4 string >\0 \b, libc version %s 0 lelong&0xFF00FFFF 0x4000301 Linux-8086 executable >2 byte&0x01 !0 \b, unmapped zero page >2 byte&0x20 0 \b, impure >2 byte&0x20 !0 >>2 byte&0x10 !0 \b, A_EXEC >2 byte&0x02 !0 \b, A_PAL >2 byte&0x04 !0 \b, A_NSYM >2 byte&0x08 !0 \b, A_STAND >2 byte&0x40 !0 \b, A_PURE >2 byte&0x80 !0 \b, A_TOVLY >28 long !0 \b, not stripped >37 string . >>36 string >\0 \b, libc version %s # 0 lelong&0xFF00FFFF 0x10000301 ld86 I80386 executable # 0 lelong&0xFF00FFFF 0xB000301 ld86 M68K executable # 0 lelong&0xFF00FFFF 0xC000301 ld86 NS16K executable # 0 lelong&0xFF00FFFF 0x17000301 ld86 SPARC executable # SYSLINUX boot logo files (from 'ppmtolss16' sources) # http://www.syslinux.org/wiki/index.php/SYSLINUX#Display_graphic_from_filename: # file extension .lss .16 0 lelong =0x1413f33d SYSLINUX' LSS16 image data # syslinux-4.05/mime/image/x-lss16.xml !:mime image/x-lss16 >4 leshort x \b, width %d >6 leshort x \b, height %d 0 string OOOM User-Mode-Linux's Copy-On-Write disk image >4 belong x version %d # SE Linux policy database # From: Mike Frysinger 0 lelong 0xf97cff8c SE Linux policy >16 lelong x v%d >20 lelong 1 MLS >24 lelong x %d symbols >28 lelong x %d ocons # Linux Logical Volume Manager (LVM) # Emmanuel VARAGNAT # # System ID, UUID and volume group name are 128 bytes long # but they should never be full and initialized with zeros... # # LVM1 # 0x0 string HM\001 LVM1 (Linux Logical Volume Manager), version 1 >0x12c string >\0 , System ID: %s 0x0 string HM\002 LVM1 (Linux Logical Volume Manager), version 2 >0x12c string >\0 , System ID: %s # LVM2 # # It seems that the label header can be in one the four first sector # of the disk... (from _find_labeller in lib/label/label.c of LVM2) # # 0x200 seems to be the common case 0x218 string LVM2\ 001 LVM2 PV (Linux Logical Volume Manager) # read the offset to add to the start of the header, and the header # start in 0x200 >&(&-12.l-0x21) byte x # display UUID in LVM format + display all 32 bytes (instead of max string length: 31) >>&0x0 string >\x2f \b, UUID: %.6s >>&0x6 string >\x2f \b-%.4s >>&0xa string >\x2f \b-%.4s >>&0xe string >\x2f \b-%.4s >>&0x12 string >\x2f \b-%.4s >>&0x16 string >\x2f \b-%.4s >>&0x1a string >\x2f \b-%.6s >>&0x20 lequad x \b, size: %lld 0x018 string LVM2\ 001 LVM2 PV (Linux Logical Volume Manager) >&(&-12.l-0x21) byte x # display UUID in LVM format + display all 32 bytes (instead of max string length: 31) >>&0x0 string >\x2f \b, UUID: %.6s >>&0x6 string >\x2f \b-%.4s >>&0xa string >\x2f \b-%.4s >>&0xe string >\x2f \b-%.4s >>&0x12 string >\x2f \b-%.4s >>&0x16 string >\x2f \b-%.4s >>&0x1a string >\x2f \b-%.6s >>&0x20 lequad x \b, size: %lld 0x418 string LVM2\ 001 LVM2 PV (Linux Logical Volume Manager) >&(&-12.l-0x21) byte x # display UUID in LVM format + display all 32 bytes (instead of max string length: 31) >>&0x0 string >\x2f \b, UUID: %.6s >>&0x6 string >\x2f \b-%.4s >>&0xa string >\x2f \b-%.4s >>&0xe string >\x2f \b-%.4s >>&0x12 string >\x2f \b-%.4s >>&0x16 string >\x2f \b-%.4s >>&0x1a string >\x2f \b-%.6s >>&0x20 lequad x \b, size: %lld 0x618 string LVM2\ 001 LVM2 PV (Linux Logical Volume Manager) >&(&-12.l-0x21) byte x # display UUID in LVM format + display all 32 bytes (instead of max string length: 31) >>&0x0 string >\x2f \b, UUID: %.6s >>&0x6 string >\x2f \b-%.4s >>&0xa string >\x2f \b-%.4s >>&0xe string >\x2f \b-%.4s >>&0x12 string >\x2f \b-%.4s >>&0x16 string >\x2f \b-%.4s >>&0x1a string >\x2f \b-%.6s >>&0x20 lequad x \b, size: %lld # LVM snapshot # from Jason Farrel 0 string SnAp LVM Snapshot (CopyOnWrite store) >4 lelong !0 - valid, >4 lelong 0 - invalid, >8 lelong x version %d, >12 lelong x chunk_size %d # SE Linux policy database 0 lelong 0xf97cff8c SE Linux policy >16 lelong x v%d >20 lelong 1 MLS >24 lelong x %d symbols >28 lelong x %d ocons # LUKS: Linux Unified Key Setup, On-Disk Format, http://luks.endorphin.org/spec # Anthon van der Neut (anthon@mnt.org) 0 string LUKS\xba\xbe LUKS encrypted file, >6 beshort x ver %d >8 string x [%s, >40 string x %s, >72 string x %s] >168 string x UUID: %s # Summary: Xen saved domain file # Created by: Radek Vokal 0 string LinuxGuestRecord Xen saved domain >20 search/256 (name >>&1 string x (name %s) # Type: Xen, the virtual machine monitor # From: Radek Vokal 0 string LinuxGuestRecord Xen saved domain #>2 regex \(name\ [^)]*\) %s >20 search/256 (name (name >>&1 string x %s...) # Systemd journald files # See http://www.freedesktop.org/wiki/Software/systemd/journal-files/. # From: Zbigniew Jedrzejewski-Szmek # check magic 0 string LPKSHHRH # check that state is one of known values >16 ubyte&252 0 # check that each half of three unique id128s is non-zero >>24 ubequad >0 >>>32 ubequad >0 >>>>40 ubequad >0 >>>>>48 ubequad >0 >>>>>>56 ubequad >0 >>>>>>>64 ubequad >0 Journal file !:mime application/octet-stream # provide more info >>>>>>>>184 leqdate 0 empty >>>>>>>>16 ubyte 0 \b, offline >>>>>>>>16 ubyte 1 \b, online >>>>>>>>16 ubyte 2 \b, archived >>>>>>>>8 ulelong&1 1 \b, sealed >>>>>>>>12 ulelong&1 1 \b, compressed # BCache backing and cache devices # From: Gabriel de Perthuis 0x1008 lequad 8 >0x1018 string \xc6\x85\x73\xf6\x4e\x1a\x45\xca\x82\x65\xf5\x7f\x48\xba\x6d\x81 BCache >>0x1010 ulequad 0 cache device >>0x1010 ulequad 1 backing device >>0x1010 ulequad 3 cache device >>0x1010 ulequad 4 backing device >>0x1048 string >0 \b, label "%.32s" >>0x1028 ubelong x \b, uuid %08x >>0x102c ubeshort x \b-%04x >>0x102e ubeshort x \b-%04x >>0x1030 ubeshort x \b-%04x >>0x1032 ubelong x \b-%08x >>0x1036 ubeshort x \b%04x >>0x1038 ubelong x \b, set uuid %08x >>0x103c ubeshort x \b-%04x >>0x103e ubeshort x \b-%04x >>0x1040 ubeshort x \b-%04x >>0x1042 ubelong x \b-%08x >>0x1046 ubeshort x \b%04x # Linux device tree: # File format description can be found in the Linux kernel sources at # Documentation/devicetree/booting-without-of.txt # From Christoph Biedl 0 belong 0xd00dfeed # structure and strings must be within blob >&(8.L) byte x >>&(12.L) byte x >>>20 belong >1 Device Tree Blob version %d >>>>4 belong x \b, size=%d >>>>20 belong >1 >>>>>28 belong x \b, boot CPU=%d >>>>20 belong >2 >>>>>32 belong x \b, string block size=%d >>>>20 belong >16 >>>>>36 belong x \b, DT structure block size=%d # glibc locale archive as defined in glibc locale/locarchive.h 0 lelong 0xde020109 locale archive >24 lelong x %d strings # Summary: Database file for mlocate # Description: A database file as used by mlocate, a fast implementation # of locate/updatedb. It uses merging to reuse the existing # database and avoid rereading most of the filesystem. It's # the default version of locate on Arch Linux (and others). # File path: /var/lib/mlocate/mlocate.db by default (but configurable) # Site: https://fedorahosted.org/mlocate/ # Format docs: http://linux.die.net/man/5/mlocate.db # Type: mlocate database file # URL: https://fedorahosted.org/mlocate/ # From: Wander Nauta 0 string \0mlocate mlocate database >12 byte x \b, version %d >13 byte 1 \b, require visibility >16 string x \b, root %s + +# Dump files for iproute2 tool. Generated by the "ip r|a save" command. URL: +# https://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 +# From: Pavel Emelyanov +0 lelong 0x45311224 iproute2 routes dump +0 lelong 0x47361222 iproute2 addresses dump + +# Image and service files for CRIU tool. +# URL: http://criu.org +# From: Pavel Emelyanov +0 lelong 0x54564319 CRIU image file v1.1 +0 lelong 0x55105940 CRIU service file +0 lelong 0x58313116 CRIU inventory + +# Kdump compressed dump files +# http://sourceforge.net/p/makedumpfile/code/ci/master/tree/IMPLEMENTATION + +0 string KDUMP Kdump compressed dump +>8 long x v%d +>12 string >\0 \b, system %s +>77 string >\0 \b, node %s +>142 string >\0 \b, release %s +>207 string >\0 \b, version %s +>272 string >\0 \b, machine %s +>337 string >\0 \b, domain %s diff --git a/contrib/file/magic/Magdir/mach b/contrib/file/magic/Magdir/mach index 23b9f8a12604..7782e5bec04c 100644 --- a/contrib/file/magic/Magdir/mach +++ b/contrib/file/magic/Magdir/mach @@ -1,214 +1,216 @@ #------------------------------------------------------------ -# $File: mach,v 1.19 2014/04/30 21:41:02 christos Exp $ +# $File: mach,v 1.20 2015/05/21 18:28:41 christos Exp $ # Mach has two magic numbers, 0xcafebabe and 0xfeedface. # Unfortunately the first, cafebabe, is shared with # Java ByteCode, so they are both handled in the file "cafebabe". # The "feedface" ones are handled herein. #------------------------------------------------------------ # if set, it's for the 64-bit version of the architecture # yes, this is separate from the low-order magic number bit # it's also separate from the "64-bit libraries" bit in the # upper 8 bits of the CPU subtype 0 name mach-o-cpu >0 belong&0x01000000 0 # # 32-bit ABIs. # # 1 vax >>0 belong&0x00ffffff 1 >>>4 belong&0x00ffffff 0 vax >>>4 belong&0x00ffffff 1 vax11/780 >>>4 belong&0x00ffffff 2 vax11/785 >>>4 belong&0x00ffffff 3 vax11/750 >>>4 belong&0x00ffffff 4 vax11/730 >>>4 belong&0x00ffffff 5 uvaxI >>>4 belong&0x00ffffff 6 uvaxII >>>4 belong&0x00ffffff 7 vax8200 >>>4 belong&0x00ffffff 8 vax8500 >>>4 belong&0x00ffffff 9 vax8600 >>>4 belong&0x00ffffff 10 vax8650 >>>4 belong&0x00ffffff 11 vax8800 >>>4 belong&0x00ffffff 12 uvaxIII >>>4 belong&0x00ffffff >12 vax subarchitecture=%d >>0 belong&0x00ffffff 2 romp >>0 belong&0x00ffffff 3 architecture=3 >>0 belong&0x00ffffff 4 ns32032 >>0 belong&0x00ffffff 5 ns32332 >>0 belong&0x00ffffff 6 m68k # 7 x86 >>0 belong&0x00ffffff 7 >>>4 belong&0x0000000f 3 i386 >>>4 belong&0x0000000f 4 i486 >>>>4 belong&0x00fffff0 0 >>>>4 belong&0x00fffff0 0x80 \bsx >>>4 belong&0x0000000f 5 i586 >>>4 belong&0x0000000f 6 >>>>4 belong&0x00fffff0 0 p6 >>>>4 belong&0x00fffff0 0x10 pentium_pro >>>>4 belong&0x00fffff0 0x20 pentium_2_m0x20 >>>>4 belong&0x00fffff0 0x30 pentium_2_m3 >>>>4 belong&0x00fffff0 0x40 pentium_2_m0x40 >>>>4 belong&0x00fffff0 0x50 pentium_2_m5 >>>>4 belong&0x00fffff0 >0x50 pentium_2_m0x%x >>>4 belong&0x0000000f 7 celeron >>>>4 belong&0x00fffff0 0x00 \b_m0x%x >>>>4 belong&0x00fffff0 0x10 \b_m0x%x >>>>4 belong&0x00fffff0 0x20 \b_m0x%x >>>>4 belong&0x00fffff0 0x30 \b_m0x%x >>>>4 belong&0x00fffff0 0x40 \b_m0x%x >>>>4 belong&0x00fffff0 0x50 \b_m0x%x >>>>4 belong&0x00fffff0 0x60 >>>>4 belong&0x00fffff0 0x70 \b_mobile >>>>4 belong&0x00fffff0 >0x70 \b_m0x%x >>>4 belong&0x0000000f 8 pentium_3 >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 0x10 \b_m >>>>4 belong&0x00fffff0 0x20 \b_xeon >>>>4 belong&0x00fffff0 >0x20 \b_m0x%x >>>4 belong&0x0000000f 9 pentiumM >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 >0x00 \b_m0x%x >>>4 belong&0x0000000f 10 pentium_4 >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 0x10 \b_m >>>>4 belong&0x00fffff0 >0x10 \b_m0x%x >>>4 belong&0x0000000f 11 itanium >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 0x10 \b_2 >>>>4 belong&0x00fffff0 >0x10 \b_m0x%x >>>4 belong&0x0000000f 12 xeon >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 0x10 \b_mp >>>>4 belong&0x00fffff0 >0x10 \b_m0x%x >>>4 belong&0x0000000f >12 ia32 family=%d >>>>4 belong&0x00fffff0 0x00 >>>>4 belong&0x00fffff0 >0x00 model=%x >>0 belong&0x00ffffff 8 mips >>>4 belong&0x00ffffff 1 R2300 >>>4 belong&0x00ffffff 2 R2600 >>>4 belong&0x00ffffff 3 R2800 >>>4 belong&0x00ffffff 4 R2000a >>>4 belong&0x00ffffff 5 R2000 >>>4 belong&0x00ffffff 6 R3000a >>>4 belong&0x00ffffff 7 R3000 >>>4 belong&0x00ffffff >7 subarchitecture=%d >>0 belong&0x00ffffff 9 ns32532 >>0 belong&0x00ffffff 10 mc98000 >>0 belong&0x00ffffff 11 hppa >>>4 belong&0x00ffffff 0 7100 >>>4 belong&0x00ffffff 1 7100LC >>>4 belong&0x00ffffff >1 subarchitecture=%d >>0 belong&0x00ffffff 12 arm >>>4 belong&0x00ffffff 0 >>>4 belong&0x00ffffff 1 subarchitecture=%d >>>4 belong&0x00ffffff 2 subarchitecture=%d >>>4 belong&0x00ffffff 3 subarchitecture=%d >>>4 belong&0x00ffffff 4 subarchitecture=%d >>>4 belong&0x00ffffff 5 \b_v4t >>>4 belong&0x00ffffff 6 \b_v6 >>>4 belong&0x00ffffff 7 \b_v5tej >>>4 belong&0x00ffffff 8 \b_xscale >>>4 belong&0x00ffffff 9 \b_v7 >>>4 belong&0x00ffffff 10 \b_v7f >>>4 belong&0x00ffffff 11 subarchitecture=%d >>>4 belong&0x00ffffff 12 \b_v7k >>>4 belong&0x00ffffff >12 subarchitecture=%d # 13 m88k >>0 belong&0x00ffffff 13 >>>4 belong&0x00ffffff 0 mc88000 >>>4 belong&0x00ffffff 1 mc88100 >>>4 belong&0x00ffffff 2 mc88110 >>>4 belong&0x00ffffff >2 mc88000 subarchitecture=%d >>0 belong&0x00ffffff 14 SPARC >>0 belong&0x00ffffff 15 i860g >>0 belong&0x00ffffff 16 alpha >>0 belong&0x00ffffff 17 rs6000 >>0 belong&0x00ffffff 18 ppc >>>4 belong&0x00ffffff 0 >>>4 belong&0x00ffffff 1 \b_601 >>>4 belong&0x00ffffff 2 \b_602 >>>4 belong&0x00ffffff 3 \b_603 >>>4 belong&0x00ffffff 4 \b_603e >>>4 belong&0x00ffffff 5 \b_603ev >>>4 belong&0x00ffffff 6 \b_604 >>>4 belong&0x00ffffff 7 \b_604e >>>4 belong&0x00ffffff 8 \b_620 >>>4 belong&0x00ffffff 9 \b_650 >>>4 belong&0x00ffffff 10 \b_7400 >>>4 belong&0x00ffffff 11 \b_7450 >>>4 belong&0x00ffffff 100 \b_970 >>>4 belong&0x00ffffff >100 subarchitecture=%d >>0 belong&0x00ffffff >18 architecture=%d >0 belong&0x01000000 0x01000000 # # 64-bit ABIs. # >>0 belong&0x00ffffff 0 64-bit architecture=%d >>0 belong&0x00ffffff 1 64-bit architecture=%d >>0 belong&0x00ffffff 2 64-bit architecture=%d >>0 belong&0x00ffffff 3 64-bit architecture=%d >>0 belong&0x00ffffff 4 64-bit architecture=%d >>0 belong&0x00ffffff 5 64-bit architecture=%d >>0 belong&0x00ffffff 6 64-bit architecture=%d >>0 belong&0x00ffffff 7 x86_64 >>>4 belong&0x00ffffff 0 subarchitecture=%d >>>4 belong&0x00ffffff 1 subarchitecture=%d >>>4 belong&0x00ffffff 2 subarchitecture=%d >>>4 belong&0x00ffffff 3 >>>4 belong&0x00ffffff 4 \b_arch1 >>>4 belong&0x00ffffff >4 subarchitecture=%d >>0 belong&0x00ffffff 8 64-bit architecture=%d >>0 belong&0x00ffffff 9 64-bit architecture=%d >>0 belong&0x00ffffff 10 64-bit architecture=%d >>0 belong&0x00ffffff 11 64-bit architecture=%d >>0 belong&0x00ffffff 12 64-bit architecture=%d >>0 belong&0x00ffffff 13 64-bit architecture=%d >>0 belong&0x00ffffff 14 64-bit architecture=%d >>0 belong&0x00ffffff 15 64-bit architecture=%d >>0 belong&0x00ffffff 16 64-bit architecture=%d >>0 belong&0x00ffffff 17 64-bit architecture=%d >>0 belong&0x00ffffff 18 ppc64 >>>4 belong&0x00ffffff 0 >>>4 belong&0x00ffffff 1 \b_601 >>>4 belong&0x00ffffff 2 \b_602 >>>4 belong&0x00ffffff 3 \b_603 >>>4 belong&0x00ffffff 4 \b_603e >>>4 belong&0x00ffffff 5 \b_603ev >>>4 belong&0x00ffffff 6 \b_604 >>>4 belong&0x00ffffff 7 \b_604e >>>4 belong&0x00ffffff 8 \b_620 >>>4 belong&0x00ffffff 9 \b_650 >>>4 belong&0x00ffffff 10 \b_7400 >>>4 belong&0x00ffffff 11 \b_7450 >>>4 belong&0x00ffffff 100 \b_970 >>>4 belong&0x00ffffff >100 subarchitecture=%d >>0 belong&0x00ffffff >18 64-bit architecture=%d 0 name mach-o-be >0 byte 0xcf 64-bit >4 use mach-o-cpu >12 belong 1 object >12 belong 2 executable >12 belong 3 fixed virtual memory shared library >12 belong 4 core >12 belong 5 preload executable >12 belong 6 dynamically linked shared library >12 belong 7 dynamic linker >12 belong 8 bundle >12 belong 9 dynamically linked shared library stub >12 belong 10 dSYM companion file >12 belong 11 kext bundle >12 belong >11 >>12 belong x filetype=%d # 0 lelong&0xfffffffe 0xfeedface Mach-O !:strength +1 +!:mime application/x-mach-binary >0 use \^mach-o-be 0 belong&0xfffffffe 0xfeedface Mach-O !:strength +1 +!:mime application/x-mach-binary >0 use mach-o-be diff --git a/contrib/file/magic/Magdir/mathematica b/contrib/file/magic/Magdir/mathematica index 3c10a57db5c8..a93899e83c2e 100644 --- a/contrib/file/magic/Magdir/mathematica +++ b/contrib/file/magic/Magdir/mathematica @@ -1,70 +1,81 @@ #------------------------------------------------------------------------------ -# $File: mathematica,v 1.7 2009/09/19 16:28:10 christos Exp $ +# $File: mathematica,v 1.8 2015/04/09 20:01:40 christos Exp $ # mathematica: file(1) magic for mathematica files # "H. Nanosecond" # Mathematica a multi-purpose math program # versions 2.2 and 3.0 #mathematica .mb 0 string \064\024\012\000\035\000\000\000 Mathematica version 2 notebook +!:ext mb 0 string \064\024\011\000\035\000\000\000 Mathematica version 2 notebook +!:ext mb # .ma # multiple possibilites: 0 string (*^\n\n::[\011frontEndVersion\ =\ Mathematica notebook #>41 string >\0 %s +!:ext mb #0 string (*^\n\n::[\011palette Mathematica notebook version 2.x #0 string (*^\n\n::[\011Information Mathematica notebook version 2.x #>675 string >\0 %s #doesn't work well # there may be 'cr' instread of 'nl' in some does this matter? # generic: 0 string (*^\r\r::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\r\n\r\n::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\015 Mathematica notebook version 2.x +!:ext mb 0 string (*^\n\r\n\r::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\r::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\r\n::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\n\n::[\011 Mathematica notebook version 2.x +!:ext mb 0 string (*^\n::[\011 Mathematica notebook version 2.x +!:ext mb # Mathematica .mx files #0 string (*This\ is\ a\ Mathematica\ binary\ dump\ file.\ It\ can\ be\ loaded\ with\ Get.*) Mathematica binary file 0 string (*This\ is\ a\ Mathematica\ binary\ Mathematica binary file #>71 string \000\010\010\010\010\000\000\000\000\000\000\010\100\010\000\000\000 # >71... is optional >88 string >\0 from %s # Mathematica files PBF: # 115 115 101 120 102 106 000 001 000 000 000 203 000 001 000 0 string MMAPBF\000\001\000\000\000\203\000\001\000 Mathematica PBF (fonts I think) # .ml files These are menu resources I think # these start with "[0-9][0-9][0-9]\ A~[0-9][0-9][0-9]\ # how to put that into a magic rule? 4 string \ A~ MAthematica .ml file # .nb files #too long 0 string (***********************************************************************\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Mathematica-Compatible Notebook Mathematica 3.0 notebook 0 string (*********************** Mathematica 3.0 notebook # other (* matches it is a comment start in these langs # GRR: Too weak; also matches other languages e.g. ML #0 string (* Mathematica, or Pascal, Modula-2 or 3 code text ######################### # MatLab v5 0 string MATLAB Matlab v5 mat-file >126 short 0x494d (big endian) >>124 beshort x version 0x%04x >126 short 0x4d49 (little endian) >>124 leshort x version 0x%04x diff --git a/contrib/file/magic/Magdir/misctools b/contrib/file/magic/Magdir/misctools index 0367ec06f25a..d09a5436298f 100644 --- a/contrib/file/magic/Magdir/misctools +++ b/contrib/file/magic/Magdir/misctools @@ -1,28 +1,37 @@ #----------------------------------------------------------------------------- -# $File: misctools,v 1.14 2014/03/06 16:08:58 christos Exp $ +# $File: misctools,v 1.15 2015/04/15 18:29:30 christos Exp $ # misctools: file(1) magic for miscellaneous UNIX tools. # 0 search/1 %%!! X-Post-It-Note text 0 string/c BEGIN:VCALENDAR vCalendar calendar file !:mime text/calendar +# updated by Joerg Jenderek at Apr 2015 +# Extension: .vcf +# http://en.wikipedia.org/wiki/VCard 0 string/c BEGIN:VCARD vCard visiting card -!:mime text/x-vcard +# deprecated +#!:mime text/x-vcard +!:mime text/vcard +# VERSION must come right after BEGIN for 3.0 or 4.0 except in 2.1 , where it can be anywhere +>12 search/14000/c VERSION: +# VERSION 2.1 , 3.0 or 4.0 +>>&0 string x \b, version %-.3s # Summary: Libtool library file # Extension: .la # Submitted by: Tomasz Trojanowski 0 search/80 .la\ -\ a\ libtool\ library\ file libtool library file # Summary: Libtool object file # Extension: .lo # Submitted by: Abel Cheung 0 search/80 .lo\ -\ a\ libtool\ object\ file libtool object file # From: Daniel Novotny 0 string MDMP\x93\xA7 MDMP crash report data # Summary: abook addressbook file # Submitted by: Mark Schreiber 0 string #\x20abook\x20addressbook\x20file abook address book !:mime application/x-abook-addressbook diff --git a/contrib/file/magic/Magdir/modem b/contrib/file/magic/Magdir/modem index 84bdb2877686..d3bf7fa2f13f 100644 --- a/contrib/file/magic/Magdir/modem +++ b/contrib/file/magic/Magdir/modem @@ -1,35 +1,46 @@ #------------------------------------------------------------------------------ -# $File: modem,v 1.5 2010/09/20 18:55:20 rrt Exp $ +# $File: modem,v 1.6 2015/02/14 17:35:47 christos Exp $ # modem: file(1) magic for modem programs # # From: Florian La Roche 1 string PC\ Research,\ Inc Digifax-G3-File >29 byte 1 \b, fine resolution >29 byte 0 \b, normal resolution 0 short 0x0100 raw G3 data, byte-padded 0 short 0x1400 raw G3 data # # Magic data for vgetty voice formats # (Martin Seine & Marc Eberhard) # # raw modem data version 1 # 0 string RMD1 raw modem data >4 string >\0 (%s / >20 short >0 compression type 0x%04x) # # portable voice format 1 # 0 string PVF1\n portable voice format >5 string >\0 (binary %s) # # portable voice format 2 # 0 string PVF2\n portable voice format >5 string >\0 (ascii %s) +# From: Bernd Nuernberger +# Brooktrout G3 fax data incl. 128 byte header +# Common suffixes: 3??, BRK, BRT, BTR +0 leshort 0x01bb +>2 leshort 0x0100 Brooktrout 301 fax image, +>>9 leshort x %d x +>>0x2d leshort x %d +>>6 leshort 200 \b, fine resolution +>>6 leshort 100 \b, normal resolution +>>11 byte 1 \b, G3 compression +>>11 byte 2 \b, G32D compression diff --git a/contrib/file/magic/Magdir/mozilla b/contrib/file/magic/Magdir/mozilla index 1f89589aa1bc..173018c3fbb8 100644 --- a/contrib/file/magic/Magdir/mozilla +++ b/contrib/file/magic/Magdir/mozilla @@ -1,9 +1,10 @@ #------------------------------------------------------------------------------ -# $File: mozilla,v 1.4 2009/09/19 16:28:11 christos Exp $ +# $File: mozilla,v 1.6 2015/01/25 16:20:46 christos Exp $ # mozilla: file(1) magic for Mozilla XUL fastload files # (XUL.mfasl and XPC.mfasl) # URL: http://www.mozilla.org/ # From: Josh Triplett 0 string XPCOM\nMozFASL\r\n\x1A Mozilla XUL fastload data +0 string mozLz4a Mozilla lz4 compressed bookmark data diff --git a/contrib/file/magic/Magdir/nasa b/contrib/file/magic/Magdir/nasa new file mode 100644 index 000000000000..49673b32fb99 --- /dev/null +++ b/contrib/file/magic/Magdir/nasa @@ -0,0 +1,7 @@ + +#------------------------------------------------------------------------------ +# nasa: file(1) magic + +# From: Barry Carter +0 string DAF/SPK NASA SPICE file (binary format) +0 string DAFETF\ NAIF\ DAF\ ENCODED NASA SPICE file (transfer format) diff --git a/contrib/file/magic/Magdir/os2 b/contrib/file/magic/Magdir/os2 index 8643adc0a91f..25fb7285cbd9 100644 --- a/contrib/file/magic/Magdir/os2 +++ b/contrib/file/magic/Magdir/os2 @@ -1,48 +1,49 @@ #------------------------------------------------------------------------------ -# $File: os2,v 1.7 2009/09/19 16:28:11 christos Exp $ +# $File: os2,v 1.8 2015/01/05 00:17:13 christos Exp $ # os2: file(1) magic for OS/2 files # # Provided 1998/08/22 by # David Mediavilla 1 search/1 InternetShortcut MS Windows 95 Internet shortcut text ->24 search/1 >\ (URL=<%s>) +>17 search/100 URL= (URL=< +>>&0 string x \b%s>) # OS/2 URL objects # Provided 1998/08/22 by # David Mediavilla #0 string http: OS/2 URL object text #>5 string >\ (WWW) #0 string mailto: OS/2 URL object text #>7 string >\ (email) <%s> #0 string news: OS/2 URL object text #>5 string >\ (Usenet) <%s> #0 string ftp: OS/2 URL object text #>4 string >\ (FTP) #0 string file: OS/2 URL object text #>5 string >\ (Local file) <%s> # >>>>> OS/2 INF/HLP <<<<< (source: Daniel Dissett ddissett@netcom.com) # Carl Hauser (chauser.parc@xerox.com) and # Marcus Groeber (marcusg@ph-cip.uni-koeln.de) # list the following header format in inf02a.doc: # # int16 ID; // ID magic word (5348h = "HS") # int8 unknown1; // unknown purpose, could be third letter of ID # int8 flags; // probably a flag word... # // bit 0: set if INF style file # // bit 4: set if HLP style file # // patching this byte allows reading HLP files # // using the VIEW command, while help files # // seem to work with INF settings here as well. # int16 hdrsize; // total size of header # int16 unknown2; // unknown purpose # 0 string HSP\x01\x9b\x00 OS/2 INF >107 string >0 (%s) 0 string HSP\x10\x9b\x00 OS/2 HLP >107 string >0 (%s) # OS/2 INI (this is a guess) 0 string \xff\xff\xff\xff\x14\0\0\0 OS/2 INI diff --git a/contrib/file/magic/Magdir/pdf b/contrib/file/magic/Magdir/pdf index dc2f7992d124..b43a675cec0c 100644 --- a/contrib/file/magic/Magdir/pdf +++ b/contrib/file/magic/Magdir/pdf @@ -1,17 +1,22 @@ #------------------------------------------------------------------------------ -# $File: pdf,v 1.7 2013/08/22 07:47:26 christos Exp $ +# $File: pdf,v 1.8 2015/01/11 18:19:18 christos Exp $ # pdf: file(1) magic for Portable Document Format # 0 string %PDF- PDF document !:mime application/pdf >5 byte x \b, version %c >7 byte x \b.%c +0 string \012%PDF- PDF document +!:mime application/pdf +>6 byte x \b, version %c +>8 byte x \b.%c + # From: Nick Schmalenberger # Forms Data Format 0 string %FDF- FDF document !:mime application/vnd.fdf >5 byte x \b, version %c >7 byte x \b.%c diff --git a/contrib/file/magic/Magdir/perl b/contrib/file/magic/Magdir/perl index b5b54fbc820a..127a37392222 100644 --- a/contrib/file/magic/Magdir/perl +++ b/contrib/file/magic/Magdir/perl @@ -1,90 +1,100 @@ #------------------------------------------------------------------------------ -# $File: perl,v 1.22 2014/04/28 12:04:35 christos Exp $ +# $File: perl,v 1.24 2015/03/27 17:58:58 christos Exp $ # perl: file(1) magic for Larry Wall's perl language. # # The `eval' lines recognizes an outrageously clever hack. # Keith Waclena # Send additions to -0 search/1 eval\ "exec\ /bin/perl Perl script text +0 search/1024 eval\ "exec\ perl Perl script text !:mime text/x-perl -0 search/1 eval\ "exec\ /usr/bin/perl Perl script text +0 search/1024 eval\ "exec\ /bin/perl Perl script text !:mime text/x-perl -0 search/1 eval\ "exec\ /usr/local/bin/perl Perl script text +0 search/1024 eval\ "exec\ /usr/bin/perl Perl script text !:mime text/x-perl -0 search/1 eval\ '(exit\ $?0)'\ &&\ eval\ 'exec Perl script text +0 search/1024 eval\ "exec\ /usr/local/bin/perl Perl script text !:mime text/x-perl -0 search/1 #!/usr/bin/env\ perl Perl script text executable +0 search/1024 eval\ 'exec\ perl Perl script text !:mime text/x-perl -0 search/1 #!\ /usr/bin/env\ perl Perl script text executable +0 search/1024 eval\ 'exec\ /bin/perl Perl script text !:mime text/x-perl -0 search/1 #! ->0 regex \^#!.*/bin/perl$ Perl script text executable +0 search/1024 eval\ 'exec\ /usr/bin/perl Perl script text +!:mime text/x-perl +0 search/1024 eval\ 'exec\ /usr/local/bin/perl Perl script text +!:mime text/x-perl +0 search/1024 eval\ '(exit\ $?0)'\ &&\ eval\ 'exec Perl script text +!:mime text/x-perl +0 search/1024 #!/usr/bin/env\ perl Perl script text executable +!:mime text/x-perl +0 search/1024 #!\ /usr/bin/env\ perl Perl script text executable +!:mime text/x-perl +0 search/1024 #! +>0 regex \^#!.*/bin/perl([[:space:]].*)*$ Perl script text executable !:mime text/x-perl # by Dmitry V. Levin and Alexey Tourbin # check the first line -0 search/1 package +0 search/1024 package >0 regex \^package[\ \t]+[0-9A-Za-z_:]+\ *; Perl5 module source text !:strength + 10 # not 'p', check other lines -0 search/1 !p +0 search/1024 !p >0 regex \^package[\ \t]+[0-9A-Za-z_:]+\ *; >>0 regex \^1\ *;|\^(use|sub|my)\ .*[(;{=] Perl5 module source text !:strength + 10 # Perl POD documents # From: Tom Hukins -0 search/1/W \=pod\n Perl POD document text -0 search/1/W \n\=pod\n Perl POD document text -0 search/1/W \=head1\ Perl POD document text -0 search/1/W \n\=head1\ Perl POD document text -0 search/1/W \=head2\ Perl POD document text -0 search/1/W \n\=head2\ Perl POD document text -0 search/1/W \=encoding\ Perl POD document text -0 search/1/W \n\=encoding\ Perl POD document text +0 search/1024/W \=pod\n Perl POD document text +0 search/1024/W \n\=pod\n Perl POD document text +0 search/1024/W \=head1\ Perl POD document text +0 search/1024/W \n\=head1\ Perl POD document text +0 search/1024/W \=head2\ Perl POD document text +0 search/1024/W \n\=head2\ Perl POD document text +0 search/1024/W \=encoding\ Perl POD document text +0 search/1024/W \n\=encoding\ Perl POD document text # Perl Storable data files. 0 string perl-store perl Storable (v0.6) data >4 byte >0 (net-order %d) >>4 byte &01 (network-ordered) >>4 byte =3 (major 1) >>4 byte =2 (major 1) 0 string pst0 perl Storable (v0.7) data >4 byte >0 >>4 byte &01 (network-ordered) >>4 byte =5 (major 2) >>4 byte =4 (major 2) >>5 byte >0 (minor %d) # This is Debian #742949 by Zefram : # ----------------------------------------------------------- # The Perl module Hash::SharedMem # defines a file format # for a key/value store. Details of the file format are in the "DESIGN" # file in the module distribution. Magic: 0 bequad =0xa58afd185cbf5af7 Hash::SharedMem master file, big-endian >8 bequad <0x1000000 >>15 byte >2 \b, line size 2^%d byte >>14 byte >2 \b, page size 2^%d byte >>13 byte &1 >>>13 byte >1 \b, max fanout %d 0 lequad =0xa58afd185cbf5af7 Hash::SharedMem master file, little-endian >8 lequad <0x1000000 >>8 byte >2 \b, line size 2^%d byte >>9 byte >2 \b, page size 2^%d byte >>10 byte &1 >>>10 byte >1 \b, max fanout %d 0 bequad =0xc693dac5ed5e47c2 Hash::SharedMem data file, big-endian >8 bequad <0x1000000 >>15 byte >2 \b, line size 2^%d byte >>14 byte >2 \b, page size 2^%d byte >>13 byte &1 >>>13 byte >1 \b, max fanout %d 0 lequad =0xc693dac5ed5e47c2 Hash::SharedMem data file, little-endian >8 lequad <0x1000000 >>8 byte >2 \b, line size 2^%d byte >>9 byte >2 \b, page size 2^%d byte >>10 byte &1 >>>10 byte >1 \b, max fanout %d diff --git a/contrib/file/magic/Magdir/riff b/contrib/file/magic/Magdir/riff index e551292b38b9..55cfb20b63f2 100644 --- a/contrib/file/magic/Magdir/riff +++ b/contrib/file/magic/Magdir/riff @@ -1,308 +1,309 @@ #------------------------------------------------------------------------------ -# $File: riff,v 1.30 2014/09/23 17:02:12 christos Exp $ +# $File: riff,v 1.31 2015/02/14 17:30:03 christos Exp $ # riff: file(1) magic for RIFF format # See # # http://www.seanet.com/users/matts/riffmci/riffmci.htm # # audio format tag. Assume limits: max 1024 bit, 128 channels, 1 MHz 0 name riff-wave >0 leshort 1 \b, Microsoft PCM >>14 leshort >0 >>>14 leshort <1024 \b, %d bit >0 leshort 2 \b, Microsoft ADPCM >0 leshort 6 \b, ITU G.711 A-law >0 leshort 7 \b, ITU G.711 mu-law >0 leshort 8 \b, Microsoft DTS >0 leshort 17 \b, IMA ADPCM >0 leshort 20 \b, ITU G.723 ADPCM (Yamaha) >0 leshort 49 \b, GSM 6.10 >0 leshort 64 \b, ITU G.721 ADPCM >0 leshort 80 \b, MPEG >0 leshort 85 \b, MPEG Layer 3 >0 leshort 0x2001 \b, DTS >2 leshort =1 \b, mono >2 leshort =2 \b, stereo >2 leshort >2 >>2 leshort <128 \b, %d channels >4 lelong >0 >>4 lelong <1000000 %d Hz # try to find "fmt " 0 name riff-walk >0 string fmt\x20 >>4 lelong <0x80 >>>8 use riff-wave >0 string LIST >>&(4.l+4) use riff-walk >0 string DISP >>&(4.l+4) use riff-walk >0 string bext >>&(4.l+4) use riff-walk >0 string Fake >>&(4.l+4) use riff-walk >0 string fact >>&(4.l+4) use riff-walk >0 string VP8 >>11 byte 0x9d >>>12 byte 0x01 >>>>13 byte 0x2a \b, VP8 encoding >>>>>14 leshort&0x3fff x \b, %d >>>>>16 leshort&0x3fff x \bx%d, Scaling: >>>>>14 leshort&0xc000 0x0000 \b [none] >>>>>14 leshort&0xc000 0x1000 \b [5/4] >>>>>14 leshort&0xc000 0x2000 \b [5/3] >>>>>14 leshort&0xc000 0x3000 \b [2] >>>>>14 leshort&0xc000 0x0000 \bx[none] >>>>>14 leshort&0xc000 0x1000 \bx[5/4] >>>>>14 leshort&0xc000 0x2000 \bx[5/3] >>>>>14 leshort&0xc000 0x3000 \bx[2] >>>>>15 byte&0x80 =0x00 \b, YUV color >>>>>15 byte&0x80 =0x80 \b, bad color specification >>>>>15 byte&0x40 =0x40 \b, no clamping required >>>>>15 byte&0x40 =0x00 \b, decoders should clamp #>0 string x we got %s #>>&(4.l+4) use riff-walk # AVI section extended by Patrik Radman # 0 string RIFF RIFF (little-endian) data # RIFF Palette format >8 string PAL \b, palette >>16 leshort x \b, version %d >>18 leshort x \b, %d entries # RIFF Device Independent Bitmap format >8 string RDIB \b, device-independent bitmap >>16 string BM >>>30 leshort 12 \b, OS/2 1.x format >>>>34 leshort x \b, %d x >>>>36 leshort x %d >>>30 leshort 64 \b, OS/2 2.x format >>>>34 leshort x \b, %d x >>>>36 leshort x %d >>>30 leshort 40 \b, Windows 3.x format >>>>34 lelong x \b, %d x >>>>38 lelong x %d x >>>>44 leshort x %d # RIFF MIDI format >8 string RMID \b, MIDI # RIFF Multimedia Movie File format >8 string RMMP \b, multimedia movie # RIFF wrapper for MP3 >8 string RMP3 \b, MPEG Layer 3 audio # Microsoft WAVE format (*.wav) >8 string WAVE \b, WAVE audio !:mime audio/x-wav >>12 string >\0 >>>12 use riff-walk # Corel Draw Picture >8 string CDRA \b, Corel Draw Picture !:mime image/x-coreldraw >8 string CDR6 \b, Corel Draw Picture, version 6 !:mime image/x-coreldraw >8 string NUNDROOT \b, Steinberg CuBase # AVI == Audio Video Interleave >8 string AVI\040 \b, AVI !:mime video/x-msvideo >>12 string LIST >>>20 string hdrlavih >>>>&36 lelong x \b, %u x >>>>&40 lelong x %u, >>>>&4 lelong >1000000 <1 fps, >>>>&4 lelong 1000000 1.00 fps, >>>>&4 lelong 500000 2.00 fps, >>>>&4 lelong 333333 3.00 fps, >>>>&4 lelong 250000 4.00 fps, >>>>&4 lelong 200000 5.00 fps, >>>>&4 lelong 166667 6.00 fps, >>>>&4 lelong 142857 7.00 fps, >>>>&4 lelong 125000 8.00 fps, >>>>&4 lelong 111111 9.00 fps, >>>>&4 lelong 100000 10.00 fps, # ]9.9,10.1[ >>>>&4 lelong <101010 >>>>>&-4 lelong >99010 >>>>>>&-4 lelong !100000 ~10 fps, >>>>&4 lelong 83333 12.00 fps, # ]11.9,12.1[ >>>>&4 lelong <84034 >>>>>&-4 lelong >82645 >>>>>>&-4 lelong !83333 ~12 fps, >>>>&4 lelong 66667 15.00 fps, # ]14.9,15.1[ >>>>&4 lelong <67114 >>>>>&-4 lelong >66225 >>>>>>&-4 lelong !66667 ~15 fps, >>>>&4 lelong 50000 20.00 fps, >>>>&4 lelong 41708 23.98 fps, >>>>&4 lelong 41667 24.00 fps, # ]23.9,24.1[ >>>>&4 lelong <41841 >>>>>&-4 lelong >41494 >>>>>>&-4 lelong !41708 >>>>>>>&-4 lelong !41667 ~24 fps, >>>>&4 lelong 40000 25.00 fps, # ]24.9,25.1[ >>>>&4 lelong <40161 >>>>>&-4 lelong >39841 >>>>>>&-4 lelong !40000 ~25 fps, >>>>&4 lelong 33367 29.97 fps, >>>>&4 lelong 33333 30.00 fps, # ]29.9,30.1[ >>>>&4 lelong <33445 >>>>>&-4 lelong >33223 >>>>>>&-4 lelong !33367 >>>>>>>&-4 lelong !33333 ~30 fps, >>>>&4 lelong <32224 >30 fps, ##>>>>&4 lelong x (%lu) ##>>>>&20 lelong x %lu frames, # Note: The tests below assume that the AVI has 1 or 2 streams, # "vids" optionally followed by "auds". # (Should cover 99.9% of all AVIs.) # assuming avih length = 56 >>>88 string LIST >>>>96 string strlstrh >>>>>108 string vids video: >>>>>>&0 lelong 0 uncompressed # skip past vids strh >>>>>>(104.l+108) string strf >>>>>>>(104.l+132) lelong 1 RLE 8bpp >>>>>>>(104.l+132) string/c cvid Cinepak >>>>>>>(104.l+132) string/c i263 Intel I.263 >>>>>>>(104.l+132) string/c iv32 Indeo 3.2 >>>>>>>(104.l+132) string/c iv41 Indeo 4.1 >>>>>>>(104.l+132) string/c iv50 Indeo 5.0 >>>>>>>(104.l+132) string/c mp42 Microsoft MPEG-4 v2 >>>>>>>(104.l+132) string/c mp43 Microsoft MPEG-4 v3 >>>>>>>(104.l+132) string/c fmp4 FFMpeg MPEG-4 >>>>>>>(104.l+132) string/c mjpg Motion JPEG >>>>>>>(104.l+132) string/c div3 DivX 3 >>>>>>>>112 string/c div3 Low-Motion >>>>>>>>112 string/c div4 Fast-Motion >>>>>>>(104.l+132) string/c divx DivX 4 >>>>>>>(104.l+132) string/c dx50 DivX 5 >>>>>>>(104.l+132) string/c xvid XviD >>>>>>>(104.l+132) string/c h264 H.264 >>>>>>>(104.l+132) string/c wmv3 Windows Media Video 9 >>>>>>>(104.l+132) string/c h264 X.264 or H.264 >>>>>>>(104.l+132) lelong 0 ##>>>>>>>(104.l+132) string x (%.4s) # skip past first (video) LIST >>>>(92.l+96) string LIST >>>>>(92.l+104) string strlstrh >>>>>>(92.l+116) string auds \b, audio: # auds strh length = 56: >>>>>>>(92.l+172) string strf >>>>>>>>(92.l+180) leshort 0x0001 uncompressed PCM >>>>>>>>(92.l+180) leshort 0x0002 ADPCM >>>>>>>>(92.l+180) leshort 0x0006 aLaw >>>>>>>>(92.l+180) leshort 0x0007 uLaw >>>>>>>>(92.l+180) leshort 0x0050 MPEG-1 Layer 1 or 2 >>>>>>>>(92.l+180) leshort 0x0055 MPEG-1 Layer 3 >>>>>>>>(92.l+180) leshort 0x2000 Dolby AC3 >>>>>>>>(92.l+180) leshort 0x0161 DivX ##>>>>>>>>(92.l+180) leshort x (0x%.4x) >>>>>>>>(92.l+182) leshort 1 (mono, >>>>>>>>(92.l+182) leshort 2 (stereo, >>>>>>>>(92.l+182) leshort >2 (%d channels, >>>>>>>>(92.l+184) lelong x %d Hz) # auds strh length = 64: >>>>>>>(92.l+180) string strf >>>>>>>>(92.l+188) leshort 0x0001 uncompressed PCM >>>>>>>>(92.l+188) leshort 0x0002 ADPCM >>>>>>>>(92.l+188) leshort 0x0055 MPEG-1 Layer 3 >>>>>>>>(92.l+188) leshort 0x2000 Dolby AC3 >>>>>>>>(92.l+188) leshort 0x0161 DivX ##>>>>>>>>(92.l+188) leshort x (0x%.4x) >>>>>>>>(92.l+190) leshort 1 (mono, >>>>>>>>(92.l+190) leshort 2 (stereo, >>>>>>>>(92.l+190) leshort >2 (%d channels, >>>>>>>>(92.l+192) lelong x %d Hz) # Animated Cursor format >8 string ACON \b, animated cursor # SoundFont 2 >8 string sfbk SoundFont/Bank # MPEG-1 wrapped in a RIFF, apparently >8 string CDXA \b, wrapped MPEG-1 (CDXA) >8 string 4XMV \b, 4X Movie file # AMV-type AVI file: http://wiki.multimedia.cx/index.php?title=AMV >8 string AMV\040 \b, AMV >8 string WEBP \b, Web/P image +!:mime image/webp >>12 use riff-walk # # XXX - some of the below may only appear in little-endian form. # # Also "MV93" appears to be for one form of Macromedia Director # files, and "GDMF" appears to be another multimedia format. # 0 string RIFX RIFF (big-endian) data # RIFF Palette format >8 string PAL \b, palette >>16 beshort x \b, version %d >>18 beshort x \b, %d entries # RIFF Device Independent Bitmap format >8 string RDIB \b, device-independent bitmap >>16 string BM >>>30 beshort 12 \b, OS/2 1.x format >>>>34 beshort x \b, %d x >>>>36 beshort x %d >>>30 beshort 64 \b, OS/2 2.x format >>>>34 beshort x \b, %d x >>>>36 beshort x %d >>>30 beshort 40 \b, Windows 3.x format >>>>34 belong x \b, %d x >>>>38 belong x %d x >>>>44 beshort x %d # RIFF MIDI format >8 string RMID \b, MIDI # RIFF Multimedia Movie File format >8 string RMMP \b, multimedia movie # Microsoft WAVE format (*.wav) >8 string WAVE \b, WAVE audio >>20 leshort 1 \b, Microsoft PCM >>>34 leshort >0 \b, %d bit >>22 beshort =1 \b, mono >>22 beshort =2 \b, stereo >>22 beshort >2 \b, %d channels >>24 belong >0 %d Hz # Corel Draw Picture >8 string CDRA \b, Corel Draw Picture >8 string CDR6 \b, Corel Draw Picture, version 6 # AVI == Audio Video Interleave >8 string AVI\040 \b, AVI # Animated Cursor format >8 string ACON \b, animated cursor # Notation Interchange File Format (big-endian only) >8 string NIFF \b, Notation Interchange File Format # SoundFont 2 >8 string sfbk SoundFont/Bank #------------------------------------------------------------------------------ # Sony Wave64 # see http://www.vcs.de/fileadmin/user_upload/MBS/PDF/Whitepaper/Informations_about_Sony_Wave64.pdf # 128 bit RIFF-GUID { 66666972-912E-11CF-A5D6-28DB04C10000 } in little-endian 0 string riff\x2E\x91\xCF\x11\xA5\xD6\x28\xDB\x04\xC1\x00\x00 Sony Wave64 RIFF data # 128 bit + total file size (64 bits) so 24 bytes # then WAVE-GUID { 65766177-ACF3-11D3-8CD1-00C04F8EDB8A } >24 string wave\xF3\xAC\xD3\x11\x8C\xD1\x00\xC0\x4F\x8E\xDB\x8A \b, WAVE 64 audio !:mime audio/x-w64 # FMT-GUID { 20746D66-ACF3-11D3-8CD1-00C04F8EDB8A } >>40 search/256 fmt\x20\xF3\xAC\xD3\x11\x8C\xD1\x00\xC0\x4F\x8E\xDB\x8A \b >>>&10 leshort =1 \b, mono >>>&10 leshort =2 \b, stereo >>>&10 leshort >2 \b, %d channels >>>&12 lelong >0 %d Hz #------------------------------------------------------------------------------ # MBWF/RF64 # see EBU TECH 3306 http://tech.ebu.ch/docs/tech/tech3306-2009.pdf 0 string RF64\xff\xff\xff\xffWAVEds64 MBWF/RF64 audio !:mime audio/x-wav >40 search/256 fmt\x20 \b >>&6 leshort =1 \b, mono >>&6 leshort =2 \b, stereo >>&6 leshort >2 \b, %d channels >>&8 lelong >0 %d Hz diff --git a/contrib/file/magic/Magdir/sereal b/contrib/file/magic/Magdir/sereal index 7fa4503f98cf..ead78d5d3566 100644 --- a/contrib/file/magic/Magdir/sereal +++ b/contrib/file/magic/Magdir/sereal @@ -1,25 +1,35 @@ #------------------------------------------------------------------------------ -# $File: sereal,v 1.2 2014/11/11 20:10:49 christos Exp $ +# $File: sereal,v 1.3 2015/02/05 19:14:45 christos Exp $ # sereal: file(1) magic the Sereal binary serialization format # # From: Ævar Arnfjörð Bjarmason # # See the specification of the format at # https://github.com/Sereal/Sereal/blob/master/sereal_spec.pod#document-header-format # # I'd have liked to do the byte&0xF0 matching against 0, 1, 2 ... by # doing (byte&0xF0)>>4 here, but unfortunately that's not # supported. So when we print out a message about an unknown format # we'll print out e.g. 0x30 instead of the more human-readable # 0x30>>4. # # See https://github.com/Sereal/Sereal/commit/35372ae01d in the # Sereal.git repository for test Sereal data. -0 string \=srl Sereal data +0 name sereal +>4 byte&0x0F x (version %d, +>4 byte&0xF0 0x00 uncompressed) +>4 byte&0xF0 0x10 compressed with non-incremental Snappy) +>4 byte&0xF0 0x20 compressed with incremental Snappy) +>4 byte&0xF0 >0x20 unknown subformat, flag: %d>>4) + +0 string/b \=srl Sereal data packet +!:mime application/sereal +>&0 use sereal +0 string/b \=\xF3rl Sereal data packet !:mime application/sereal ->4 byte&0x0F x (version %d, ->4 byte&0xF0 0x00 uncompressed) ->4 byte&0xF0 0x10 compressed with non-incremental Snappy) ->4 byte&0xF0 0x20 compressed with incremental Snappy) ->4 byte&0xF0 >0x20 unknown subformat, flag: %d>>4) +>&0 use sereal +0 string/b \=\xC3\xB3rl Sereal data packet, UTF-8 encoded +!:mime application/sereal +>&0 use sereal + diff --git a/contrib/file/magic/Magdir/sgml b/contrib/file/magic/Magdir/sgml index f9cab0816539..cf2b40e9138c 100644 --- a/contrib/file/magic/Magdir/sgml +++ b/contrib/file/magic/Magdir/sgml @@ -1,108 +1,128 @@ #------------------------------------------------------------------------------ -# $File: sgml,v 1.30 2013/12/21 14:27:24 christos Exp $ +# $File: sgml,v 1.31 2015/03/11 19:38:04 christos Exp $ # Type: SVG Vectorial Graphics # From: Noel Torres 0 string \15 string >\0 >>19 search/4096 \>19 search/4096 \15 string >\0 >>19 search/4096 \15 string >\0 >>19 search/4096/cWbt \ HTML document text +!:mime text/html +!:strength + 5 +0 search/4096/cWt \ HTML document text +!:mime text/html +!:strength + 5 +0 search/4096/cWt \ HTML document text !:mime text/html !:strength + 5 -0 search/4096/cwt \ HTML document text !:mime text/html !:strength + 5 -0 search/4096/cwt \