diff --git a/contrib/tcsh/FREEBSD-Xlist b/contrib/tcsh/FREEBSD-Xlist index b6e5636aa567..49621ab36f0f 100644 --- a/contrib/tcsh/FREEBSD-Xlist +++ b/contrib/tcsh/FREEBSD-Xlist @@ -1,9 +1,24 @@ $FreeBSD$ */BUGS +*/Imakefile +*/MAKEDIFFS +*/MAKESHAR +*/Makefile.ADMIN +*/Makefile.in +*/Makefile.std +*/Makefile.vms +*/config.guess +*/config.h.in +*/config.rpath +*/config.sub +*/configure +*/imake.config +*/install-sh +*/svn */config/a* */config/bs2000 */config/bsd */config/bsdreno */config/[c-z]* */tests */win32 diff --git a/contrib/tcsh/Imakefile b/contrib/tcsh/Imakefile deleted file mode 100644 index bd1b43b1a24e..000000000000 --- a/contrib/tcsh/Imakefile +++ /dev/null @@ -1,631 +0,0 @@ -XCOMM -XCOMM Imakefile for tcsh 6.12 -XCOMM Marc Horowitz, MIT SIPB -XCOMM - -#ifdef DestDir -#undef DestDir -#endif -#ifdef ManSuffix -#undef ManSuffix -#endif - -/* All config options go in a separate file. */ - -#include "imake.config" - -#ifndef HasGcc -# define HasGcc 0 -#endif - -#ifndef HasGcc2 -# define HasGcc2 0 -#endif - -/* This is a giant conditional block. It should be set up right for -platforms which are in here, but it may need to be changed for new -ones. Please send in your fixes and additions! */ - -/**** tcsh configuration defines ****/ - -/* specific platforms */ - -#ifndef ConfigH -# ifdef UltrixArchitecture -# define ConfigH ultrix -# endif - -# ifdef UxpArchitecture -# define ConfigH sysv4 -# endif - -# if defined(LinuxArchitecture) || defined(GNUArchitecture) -# define ConfigH linux -# endif - -# ifdef AlphaArchitecture -# if !defined(LinuxArchitecture) && !defined(GNUArchitecture) -# define ConfigH decosf1 -# endif -# if !HasGcc -# define MyCflags -std1 -Olimit 2000 -# else -# define NoCombineRegs -# endif -# endif - -# if defined(VaxArchitecture) && !defined(UltrixArchitecture) -# define ConfigH bsd -# endif - -# ifdef NeXTArchitecture -# define ConfigH mach -# endif - -# if defined(SunArchitecture) -# if (OSMajorVersion == 3) -# define ConfigH sunos35 -# else -# if (OSMajorVersion == 4) -# if (OSMinorVersion == 0) -# define ConfigH sunos40 -# else /* OSMinorVersion == 1 */ -# if (OSTeenyVersion == 3) -# define ConfigH sunos413 -# else /* OsTeenyVersion in [0,1,2] */ -# define ConfigH sunos41 -# endif -# endif -# define NoCombineRegs -# else /* OSMajorVersion == 5 */ -# if (OSMinorVersion < 3) -# if (OSMinorVersion < 2) -# define ConfigH sol2 -# else -# define ConfigH sol22 -# endif -# else -# if (OSMinorVersion < 4) -# define ConfigH sol23 -# else -# if (OSMinorVersion < 6) -# define ConfigH sol24 -# else -# if (OSMinorVersion < 9) -# define ConfigH sol26 -# else -# define ConfigH sol29 -# endif -# endif -# endif -# endif -# define NoCombineRegs -# endif -# endif -# endif - -# ifdef HPArchitecture -/* For some stupid reason makedepend on HP requires this */ -DEPENDFLAGS = -o.o -# if (OSMajorVersion >= 8) -# define ConfigH hpux8 -# else -# define ConfigH hpux7 -# endif -# endif - -# ifdef CrayArchitecture -# define ConfigH cray -# endif - -# ifdef SGIArchitecture -# define ConfigH irix -# define UseLibBSD -# if (OSMajorVersion < 5) -# ifdef you_are_using_yp -# define UseSunLib -# endif -# if !HasGCC -# define MyStdc -D__STDC__ -# if SGICompilerMajorVersion < 4 -CCOPTIONS=-float # We don't want -cckr and -prototypes -# endif -# endif -# endif -# if (OSMajorVersion == 6) -# if (OSMinorVersion >= 2) -# undef UseLibBSD -# define ConfigH irix62 -# endif -# endif -# endif - -# ifdef IBMArchitecture -# undef UseLibBSD -# if (SystemV == YES) -# define ConfigH aix -# if OSMajorVersion < 3 -# if OSMinorVersion < 2 -# define UseLibBSD -# endif -# endif -# else -# define ConfigH bsd -# define AOSArchitecture -# endif -# endif - - -#ifdef AOSArchitecture -#define MyStdc -U__STDC__ -#endif - -# if defined(MipsBsdArchitecture) || defined(MipsSysvArchitecture) -# define ConfigH mips -# endif - -# ifdef DguxArchitecture -# define ConfigH dgux -# endif - -# ifdef ConvexArchitecture -# define ConfigH convex -# endif - -# if defined(SQNTArchitecture) || defined(SequentArchitecture) -# define ConfigH sequent -# endif - -# ifdef MacIIArchitecture -# define ConfigH mac2 -# endif - -# ifdef MinixArchitecture -/* Maybe conditional on MACH? */ -SYSSRCS=mi.termios.c mi.wait.h mi.varargs.h -SYSOBJS=mi.termios.${SUF} -EXTF=ma.setp.c vms.termcap.c -# else -/* Maybe conditional on MACH? */ -SYSSRCS=ma.setp.c -SYSOBJS=ma.setp.${SUF} -EXTF=mi.termios.c mi.wait.h mi.varargs.h vms.termcap.c -# endif - -# ifdef i386Isc -# if IscVersion != 202 -# define ConfigH isc -# define UseLibCposix -# else -# define ConfigH isc202 -# endif -# endif /* i386Isc */ - -# ifdef OpenBSDArchitecture -# define ConfigH bsd4.4 -# endif /* OpenBsdArchitecture */ - -# ifdef NetBSDArchitecture -# define ConfigH bsd4.4 -# endif /* NetBsdArchitecture */ - -# ifdef FreeBSDArchitecture -# define ConfigH bsd4.4 -# endif /* FreeBsdArchitecture */ - -# ifdef MidnightBSDArchitecture -# define ConfigH bsd4.4 -# endif /* MidnightBsdArchitecture */ - -# ifdef i386SVR4Architecture -# define ConfigH sysv4 -# ifdef DELL -# define NoCombineRegs -# endif -# endif - -#endif /* !ConfigH */ - -/* generic os's */ - -#ifndef ConfigH - -#if (SystemV == YES) -#define ConfigH sysv3 -#else -/* why this as a default? Why not? */ -#define ConfigH bsd -#endif - -#endif /* !ConfigH */ - -/**** libraries ****/ - -#if (SystemV == NO) || defined(HPArchitecture) || \ - defined(SQNTArchitecture) || defined(SequentArchitecture) || \ - defined(MacIIArchitecture) || defined(UseLibTermcap) -LIBTERMCAP = -ltermcap -#else -LIBTERMCAP = -#endif - -#if defined(SQNTArchitecture) || defined(SequentArchitecture) -LIBSQNT=-lsocket -linet -lnsl -lseq -#endif - -/* This may not be good enough - I don't have access to enough systems -to really test it. */ -#if (SystemV == YES) || defined(UseLibCurses) && !defined(HPArchitecture) -LIBCURSES = -lcurses -#else -LIBCURSES = -#endif - -#if defined(UseLibNet) -LIBNET = -lnet -#else -LIBNET = -#endif - -#if defined(UseLibSocket) -LIBSOCKET = -lsocket -#else -LIBSOCKET = -#endif - -#if defined(UseLibBSD) -LIBBSD = -lbsd -#else -LIBBSD = -#endif - -#if (defined(SGIArchitecture) && \ - (OSMajorVersion == 3) && (OSMinorVersion == 3)) || \ - defined(UseLibC_S) -LIBC_S = -lc_s -#else -LIBC_S = -#endif - -#if defined(UseLibSun) -LIBSUN = -lsun -#else -LIBSUN = -#endif - -#if defined(UseLibCposix) -LIBCPOSIX = -lcposix -#else -LIBCPOSIX = -#endif - -#if defined(UseLibInet) -LIBINET = -linet -#else -LIBINET = -#endif - -#if defined(UseLibDir) -LIBDIRECT = -ldir -#else -LIBDIRECT = -#endif - -#if defined(UseLibX) -LIBX = -lx -#else -LIBX = -#endif - -#if defined(UseLibIntl) -LIBINTL = -lintl -#else -LIBINTL = -#endif - -#if (HasLibCrypt == YES) -LIBCRYPT = -lcrypt -#else -LIBCRYPT = -#endif - -#if defined(MacIIArchitecture) || defined(UseLibPosix) -LIBPOSIX = -lposix -#else -LIBPOSIX = -#endif - -#if defined(ATTArchitecture) || defined(UseLibDirent) -LIBDIRECTENT = -ldirent -#else -LIBDIRECTENT = -#endif - -/* The order here is significant. Although nothing uses all of these, -some platforms which use more than one do care about the order. */ - -SYSLIBS = $(LIBPOSIX) $(LIBDIRECTENT) $(LIBTERMCAP) $(LIBCURSES) \ - $(LIBNET) $(LIBINTL) $(LIBSOCKET) $(LIBSUN) $(LIBBSD) $(LIBCPOSIX) \ - $(LIBINET) $(LIBDIRECT) $(LIBX) $(LIBC_S) $(LIBSQNT) $(LIBCRYPT) - -/* Past here, nothing should need to be changed to compile on a different -platform, unless you have a really weird architecture. */ - -#ifdef MyCC -CC = MyCC -#else -# if HasGcc -# if HasGcc2 -CC = gcc -# else -# ifdef NoCombineRegs -CC = gcc -finline-functions -fstrength-reduce -# else -CC = gcc -fcombine-regs -finline-functions -fstrength-reduce -# endif -# endif -# else -CC = cc -# endif -#endif - -#ifdef HESIOD -HESLIB = -L/usr/athena/lib -lhesiod -/* it seems to me that the -I shouldn't be necessary, but there seems -to be a bug in the Imake stuff, so here it is. */ -HESDEF = -DHESIOD -I/usr/athena/include -#else -HESLIB = -HESDEF = -#endif - -#ifdef AFS -#ifndef AFSDIR -AFSDIR = /usr/afsws -#endif -#ifdef AFS33 -#define AFS33LIB -laudit -#else -#define AFS33LIB -#endif -/* Auxilliary libs needed for AFS */ -/* Both HPUX and Solaris need the BSD libraries. We need -lc before - * the bsd library to avoid using any more of it than is necessary. - */ -#if defined(HPArchitecture) -#define AFSAUXLIB -lc -lBSD -/* This is probably a kludge, but so is imake. */ -#else -#if defined(SunArchitecture) && (OSMajorVersion == 5) -#define AFSAUXLIB -lsocket -lnsl -lc -lucb -#else -#define AFSAUXLIB -#endif -#endif /* AFSAUXLIB */ -AFSLIB = -L$(AFSDIR)/lib -L$(AFSDIR)/lib/afs -lkauth -lprot -lubik\ - -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ - $(AFSDIR)/lib/afs/util.a AFS33LIB AFSAUXLIB -AFSDEF = -DAFS -I$(AFSDIR)/include -#else -AFSLIB = -AFSDEF = -#endif - -/* This is encore specific, but I don't know what encore's #define is, -and it shouldn't hurt to have it here, so here it is */ -PARALLEL=12 # Make the multi-max run fast. - -#ifndef TcshTop -#define TcshTop /usr/local -#endif -TCSHTOP = TcshTop - -#ifndef ManSuffix -#define ManSuffix 1 -#endif -MANSUFFIX = ManSuffix - -#ifdef TcshPath -PATH_TCSHELL = TcshPath -TCSHPATH = -D_PATH_TCSHELL='"$(PATH_TCSHELL)"' -#else -TCSHPATH = -#endif - -#ifdef DestBin -TCSH_BINDIR = DestBin -#else -TCSH_BINDIR = $(TCSHTOP)/bin -#endif -#ifdef DestMan -TCSH_MANDIR = DestMan -#else -TCSH_MANDIR = $(TCSHTOP)/man/man$(MANSUFFIX) -#endif - -LOCALLIBS = - -#ifndef MyCflags -#define MyCflags -#endif - -#ifndef MyDefines -#define MyDefines -#endif - -#ifndef MyIncludes -#define MyIncludes -#endif - -#ifndef MyStdc -#define MyStdc -#endif - -#ifdef CDebugFlags -CDEBUGFLAGS = CDebugFlags -#else -# if HasGcc2 -CDEBUGFLAGS = -O2 -# else -CDEBUGFLAGS = -O -# endif -#endif - - -#ifdef HostType -HOSTTYPE=HostType -HTDEF = -DHOSTTYPE='"$(HOSTTYPE)"' -#else -HTDEF = -#endif - -DEFINES = $(TCSHPATH) $(HESDEF) $(AFSDEF) $(HTDEF) MyDefines MyCflags MyStdc -INCLUDES = -I. MyIncludes -#ifdef MyLibs -LDLIBS = MyLibs -#endif - -SUF = o -VERSION = 6.12 - -SHSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c \ - sh.char.c sh.exp.c sh.file.c sh.func.c \ - sh.glob.c sh.hist.c sh.init.c sh.lex.c \ - sh.misc.c sh.parse.c sh.print.c sh.proc.c \ - sh.sem.c sh.set.c sh.time.c dotlock.c dotlock.h glob.c \ - sh.char.h sh.dir.h sh.proc.h sh.h \ - sh.decls.h glob.h ${SYSSRCS} -SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ - sh.char.${SUF} sh.exp.${SUF} sh.file.${SUF} sh.func.${SUF} \ - sh.glob.${SUF} sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} \ - sh.misc.${SUF} sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.sem.${SUF} sh.set.${SUF} sh.time.${SUF} dotlock.${SUF} glob.${SUF} \ - ${SYSOBJS} - -TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ - tw.comp.c tw.color.c -TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ - tw.comp.${SUF} tw.color.${SUF} - -EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ - ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h -EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ - ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} - -TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ - tc.func.c tc.nls.c tc.nls.h tc.os.c tc.os.h tc.printf.c tc.prompt.c \ - tc.disc.${SUF} tc.func.${SUF} tc.nls.${SUF} tc.os.${SUF} \ - tc.printf.${SUF} tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h \ - tc.vers.c tc.wait.h tc.who.c tc.h -TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ - tc.disc.${SUF} tc.func.${SUF} tc.os.${SUF} tc.printf.${SUF} \ - tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ - tc.vers.${SUF} tc.who.${SUF} - -MISCF = Makefile.std BUILDING Fixes MAKEDIFFS MAKESHAR NewThings README.md \ - FAQ WishList config_f.h eight-bit.me glob.3 patchlevel.h pathnames.h \ - tcsh.man Ported src.desc Imakefile imake.config complete.tcsh \ - Makefile.vms termcap.vms snames.h host.defs gethost.c tcsh.man2html \ - Makefile.in configure.ac Makefile.win32 aclocal.m4 dot.login dot.tcshrc -CONFSRCS=config/[a-z]* - - -SRCS = $(SHSRCS) $(TWSRCS) $(EDSRCS) $(TCSRCS) -OBJS = $(SHOBJS) $(TWOBJS) $(EDOBJS) $(TCOBJS) - -ALLSRCS= $(MISCF) $(SRCS) $(EXTF) - -AllTarget(tcsh) - -ed.defns.h: config.h ed.defns.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_ed_defns' >> $@ - @echo '#define _h_ed_defns' >> $@ - egrep '[FV]_' ed.defns.c | egrep '^#define' >> $@ - @echo '#endif /* _h_ed_defns */' >> $@ - -sh.err.h: config.h sh.err.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_sh_err' >> $@ - @echo '#define _h_sh_err' >> $@ - egrep 'ERR_' sh.err.c | egrep '^#define' >> $@ - @echo '#endif /* _h_sh_err */' >> $@ - -tc.const.h: config.h tc.const.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_tc_const' >> $@ - @echo '#define _h_tc_const' >> $@ - ${CC} -E $(INCLUDES) ${DEFINES} -D_h_tc_const tc.const.c | \ - grep 'Char STR' | \ - sed -e 's/Char \([a-zA-Z0-9_]*\)\[\].*/extern Char \1[];/' | \ - sort >> $@ - @echo '#endif /* _h_tc_const */' >> $@ - -config.h: config_f.h - cp config/ConfigH config.h - -$(OBJS): sh.err.h tc.const.h ed.defns.h - -tar.Z: - rm -f tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tar.gz: - rm -f tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - -shar: - rm -f tcsh-*.shar - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ - tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ - tcsh-${VERSION}/?*/set?* - rm -rf tcsh-${VERSION} - -catalogs: - @(cd nls; make catalogs) - -world: - $(MAKE) clean ; $(MAKE) depend ; $(MAKE) tcsh ; $(MAKE) install - -clean:: - rm -f ed.defns.h sh.err.h tc.const.h config.h tc.defs.* - rm -f tcsh.*.m tcsh.*.cat - -depend:: config.h ed.defns.h sh.err.h tc.const.h $(SRCS) tc.defs.c - -tc.defs.${SUF}: tc.defs.c sh.h - -tc.defs.c: gethost host.defs - @rm -f $@ - @echo "/* Do not edit this file, make creates it */" > $@ - ./gethost host.defs >> $@ - -ALIB=$(HESLIB) $(AFSLIB) $(SYSLIBS) -AINC=ed.defns.h sh.err.h tc.const.h sh.h - -NormalProgramTarget(tcsh, $(OBJS), $(AINC), $(LOCALLIBS), $(ALIB)) -NormalProgramTarget(gethost, gethost.${SUF}, $(AINC), $(LOCALLIBS), $(ALIB)) - -InstallProgram(tcsh,$(TCSH_BINDIR)) -InstallManPage(tcsh,$(TCSH_MANDIR)) -DependTarget() diff --git a/contrib/tcsh/MAKEDIFFS b/contrib/tcsh/MAKEDIFFS deleted file mode 100755 index be0e5b242668..000000000000 --- a/contrib/tcsh/MAKEDIFFS +++ /dev/null @@ -1,40 +0,0 @@ -#!/bin/sh -# -# MAKEDIFFS.sh: Make context diffs for the csh sources -# -XINUDIR=/usr/share/src/mtXinu/bin/csh -BSDDIR=/usr/share/src/mtXinu/BSD/bin/csh -TAHOEDIR=/usr/share/src/mtXinu/TAHOE/bin/csh -RENODIR=/usr/share/src/mtXinu/RENO/bin/csh -TCSHDIR=`pwd` -case "x$1" in -xxinu) - CSHDIR=$XINUDIR;; -xbsd) - CSHDIR=$BSDDIR;; -xtahoe) - CSHDIR=$TAHOEDIR;; -xreno) - CSHDIR=$RENODIR;; -x*) - echo "Usage: `basename $0` [bsd|tahoe|xinu|reno]";exit 1;; -esac -DIFF1='sh.c sh.char.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.exp.c sh.file.c' -DIFF2='sh.func.c sh.glob.c sh.hist.c sh.init.c sh.lex.c sh.misc.c sh.parse.c sh.print.c' -DIFF3='sh.proc.c sh.sem.c sh.set.c sh.time.c sh.char.h sh.dir.h sh.h sh.local.h sh.proc.h' - -for i in $DIFF1 -do - diff -c $CSHDIR/$i $TCSHDIR/$i -done > DIFFS.1 - -for i in $DIFF2 -do - diff -c $CSHDIR/$i $TCSHDIR/$i -done > DIFFS.2 - -for i in $DIFF3 -do - diff -c $CSHDIR/$i $TCSHDIR/$i -done > DIFFS.3 -exit 0 diff --git a/contrib/tcsh/MAKESHAR b/contrib/tcsh/MAKESHAR deleted file mode 100755 index 48c73b7c74ab..000000000000 --- a/contrib/tcsh/MAKESHAR +++ /dev/null @@ -1,120 +0,0 @@ -#!/bin/sh -# -# MAKESHAR.sh: Make a shar file for the sources -# - -AWK=/usr/bin/nawk # Must be nawk or gawk cause of 2D arrays -WC=/usr/ucb/wc -GREP=/usr/bin/egrep -SORT=/usr/bin/sort -SH=/bin/sh - -dirs= -name=kit -files= -verbose=0 -size=45000 - -for i -do - case $i in - -n) - name=;; - -v) - verbose=1;; - -d) - SH=/bin/cat;; - -s) - size=$1;; - *) - if [ -z "$name" ] - then - name=$i - elif [ -d $i ] - then - dirs="$dirs $i" - elif [ -f $i ] - then - files="$files $i" - else - echo "$0: File `$i' not found." 1>&2 - exit 1 - fi;; - esac -done - -if [ \( -z "$files" \) -a \( -z "$dirs" \) ] -then - echo "Usage: $0 [-n name] [-s size] [-vd] ." 1>&2 - exit 1 -fi - -$WC $files | $GREP -v total | $SORT +2 | $AWK ' - BEGIN { - i = 0; - seq = 1; - size = 0; - name = 1; - used = 2; - verbose='"$verbose"'; - tty = "/dev/tty"; - maxsize = '"$size"'; - dirs = "'"$dirs"'"; - }; - { - a[i, size] = $3; - a[i, name] = $4; - a[i, used] = 0; - i++; - }; - END { - for (maxi = i--; i >= 0; i--) { - idx = 0; - if (a[i, used] == 0) { - if (verbose && a[i, size] > maxsize) - printf("Warning: File %s is %d > %d\n", - a[i, name], a[i, size], maxsize) > tty; - s = a[i, size]; - a[i, used] = 1; - kit[seq, idx++] = i; - j = 0; - while (j < maxi) { - # Find the greatest file we can add - j = maxi; - for (k = 0; k < maxi; k++) - if (a[k, used] == 0 && a[k, size] + s < maxsize) - j = k; - if (j < maxi) { - s += a[j, size]; - a[j, used] = 1; - kit[seq, idx++] = j; - } - } - sizes[seq] = s; - kit[seq++, idx] = -1; - } - } - for (i = 1; i < seq; i++) { - printf("shar -n%d -e%d %s ", i, seq - 1, dirs); - if (verbose) { - printf("%3d of %3d: ", i, seq - 1) > tty; - len = 12; - } - for (j = 0; kit[i, j] != -1; j++) { - s = a[kit[i, j], name]; - if (verbose) { - clen = length(s) + 1; - len += clen; - if (len > 70) { - printf("\n ") > tty; - len = 12 + clen; - } - printf("%s ", s) > tty; - } - printf("%s ", s); - } - printf("> '"$name"'-%d.shar;", i); - if (verbose) - printf("= %5d\n", sizes[i]) > tty; - } - }' | $SH diff --git a/contrib/tcsh/Makefile.ADMIN b/contrib/tcsh/Makefile.ADMIN deleted file mode 100644 index 5ad3bb8fb3c5..000000000000 --- a/contrib/tcsh/Makefile.ADMIN +++ /dev/null @@ -1,24 +0,0 @@ -# -# Makefile.ADMIN -# -# Maintenance tasks -# -# You can refetch files from the website, then run "git diff" to -# sanity check any changes before committing. -# - -LYNX= lynx -dump -nolist -TRIM= expand | sed -e 's/^ *$$//' | cat -s -WEB= https://www.tcsh.org - -PAGES= FAQ - -all: ${PAGES} - -.for i in ${PAGES} -$i: force - ${LYNX} ${WEB}/${i:tl}/ | ${TRIM} > ${.TARGET} -.endfor - -.DUMMY: force -force: diff --git a/contrib/tcsh/Makefile.in b/contrib/tcsh/Makefile.in deleted file mode 100644 index c6b5f2554cc0..000000000000 --- a/contrib/tcsh/Makefile.in +++ /dev/null @@ -1,782 +0,0 @@ -# -# C Shell with process control; VM/UNIX VAX Makefile -# Bill Joy UC Berkeley; Jim Kulp IIASA, Austria -# -# With an input editor, command completion, etc. and ported to all sorts of -# things; Paul Placeway, CIS Dept., Ohio State University -# -SHELL=/bin/sh -ENVCMD=/usr/bin/env -VERSION=@PACKAGE_VERSION@ -BUILD=tcsh$(EXEEXT) -VPATH=@srcdir@ -srcdir=@srcdir@ - -################################################################ -## CFLAGS. For various -D things, see config.h -################################################################ -# -# These are the default suffixes from .c to .o and -c to get there -# but to use the global optimizer on the mips boxes, see below -# -SUF=o -CF=-c - -CPPFLAGS=-I. -I$(srcdir) - -LFLAGS= -# hpux lint -#LFLAGS= -Zn10000 - - -# This is set by autoconf: -CFLAGS = @CFLAGS@ -# debug: -#CFLAGS= -g -# production: -#CFLAGS= -O -# Broken optimizers.... -#CFLAGS= - -#CFLAGS= -g -pg -DPROF -#CFLAGS= -O -pg -DPROF - -# gcc 1.00-1.37 -#CFLAGS= -O -finline-functions -fstrength-reduce - -# gcc 1.37-1.40 -#CFLAGS= -O -fcombine-regs -finline-functions -fstrength-reduce -# add -msoft-float for 68881 machines. - -# gcc 2.0 -# On the sparc, don't use -O2; it breaks setjmp() and vfork() -#CFLAGS= -O - -# gcc-2.1+ -#CFLAGS= -O2 - -# lucid c on suns -#CFLAGS= -O5 - -# gcc 2.1 on linux -#CFLAGS= -O6 -fomit-frame-pointer - -# HP/UX 8.0, 9.0 -#CFLAGS= +O3 -Aa - -# Ultrix 4.2a -#CFLAGS= -O -Olimit 2000 - -# Intel Paragon OSF/1 with PGI compilers -#CFLAGS= -O -Mnodebug -Mnoperfmon - -# DEC Alpha OSF/1 -## Normal Optimization -#CFLAGS= -O2 -Olimit 2000 -## Full Optimization - may not work -#CFLAGS= -O3 -Olimit 2000 -#CF=-j -#SUF=u -#.SUFFIXES: .u - -# for silicon graphics (and other mips compilers) -- use the -# global optimizer! (-O3). -# On SGI 4.0+ you need to add -D__STDC__ too. -#CFLAGS= -O3 -## Ultrix 4.2a -#CFLAGS= -O3 -Olimit 2000 -#CF=-j -#SUF=u -#.SUFFIXES: .u ## Ultrix and gnu-make need that - -# mips systems -# CFLAGS= -O -systype bsd43 -Wf,-XNd5000 -Wf,-XNp6000 -Olimit 2000 - -# for at&t machines -#CFLAGS= -O -Ksd - -# Stardent Titan -#CFLAGS = -O -43 - -# Stardent Stellar or sunos4 /bin/cc or Solaris2.1 /opt/SUNWspro/bin/cc -#CFLAGS = -O4 - -# Intergraph clipper CLIX 3.1 -#CFLAGS= -w -O2 - -# Dnix 5.3 -#CFLAGS = -O -X7 - -# Pyramid OS/x -#CFLAGS = -OG - -# Multiflow (5M binary... if you choose -O5!) -#CFLAGS = -O5 -sb_trace 0 - -# DDE Supermax Unix SYSV Rel III. -# CFLAGS= -O3 - -# SINIX RMx00 -#CFLAGS= -O# -D_POSIX_SOURCE# -kansi - -# Apollo's with cc [apollo builtins don't work with gcc] -# and apollo should not define __STDC__ if it does not have -# the standard header files. RT's (aos4.3) need that too; -# you might want to skip the -O on the rt's... Not very wise. -# AIX/ESA needs -D_IBMESA on command line (this may disappear by GA) -#DFLAGS=-U__STDC__ -#DFLAGS=-D_IBMESA -# On aix2.2.1 we need more compiler space. -#DFLAGS=-Nd4000 -Nn3000 -# AU/X 2.0 needs a flag for POSIX (read the config file) -#DFLAGS=-Zp -# Tektronix 4300 running UTek 4.0 (BSD 4.2) needs: -#DFLAGS = -DUTek -DBSD -# VMS_POSIX needs: -#DFLAGS=-D_VMS_POSIX -# Multiflow and PCC compilers don't like void typedefs. -# You may also need -U__STDC__ if you use pcc (i.e. ibmrt aos4.3). -#DFLAGS=-DMULTIFLOW -#DFLAGS=-DPCC -# DELL SVR4 -#DFLAGS=-DDELL -#DFLAGS= -#DFLAGS=-D_PATH_TCSHELL='"${DESTBIN}/tcsh"' -## The following is set by autoconf. -DFLAGS = -D_PATH_TCSHELL='"${bindir}/tcsh"' @DFLAGS@ @CPPFLAGS@ - - -################################################################ -## LDFLAGS. Define something here if you need to -################################################################ -## This is set by autoconf: -LDFLAGS= @LDFLAGS@ -## The simplest, suitable for all. -#LDFLAGS= -## Stripped. Takes less space on disk. -#LDFLAGS= -s -## Pure executable. Spares paging over the network for machines with -## local swap but external /usr/local/bin . -#LDFLAGS= -s -n -## Without dynamic linking. (SunOS/cc) -#LDFLAGS= -s -n -Bstatic -## Without dynamic linking. (SunOS/gcc) -#LDFLAGS= -s -n -static -## Stripped, shared text (Unicos) -#LDFLAGS= -Wl,-s,-n -## Link statically. (linux) -#LDFLAGS= -s -static -## Impure executable (linux) -#LDFLAGS= -s -N - -################################################################ -## SBINLDFLAGS. Flags to build a tcsh suitable for installation in -## in /sbin under Solaris with gcc. See the "tcsh.sbin" -## target. -################################################################ -SBINLDFLAGS=-Wl,-R/etc/lib,-I/etc/lib/ld.so.1,-ldl,-Bstatic - -################################################################ -## LIBES. Pick one, or roll your own. -################################################################ -## This is set by autoconf. -LIBES= @LIBS@ -## BSD style things -#LIBES= -ltermcap -## SunOS, HP-UX, pyramid -#LIBES= -ltermcap -## Linux -#LIBES= -ltermcap -## Linux with PW_SHADOW -#LIBES= -ltermcap -lshadow -## Tek XD88/10 (UTekV) with PW_SHADOW -#LIBES= -ltermcap -lsec -## Motorola MPC (sysV88) with PW_SHADOW -#LIBES= -ltermcap -lsec -## Mach -#LIBES= -ltermcap -lcs -## DEC osf1 on the alpha -#LIBES= -ltermcap -lbsd -## Intel paragon -#LIBES= -ltermcap -lbsd -## Clipper intergraph -#LIBES= -ltermcap -lbsd -## Sequent's Dynix -#LIBES= -ltermcap -lseq -## Ultrix with Enhanced Security -#LIBES= -ltermcap -lauth -## Xenix 386 style things -#LIBES= -ltermcap -ldir -lx -## masscomp RTU6.0 -#LIBES= -ltermcap -lndir -lsocket -ljobs -## AIX on the rt -#LIBES= -lcurses -## TitanOS on the stellar -#LIBES= -lcurses -## SysV4 w/o BSDTIMES or Solaris 2 -#LIBES= -ltermlib -lsocket -lnsl -## SysV3 w/o networking -#LIBES= -lcurses -## SysV3 with networking -#LIBES= -lcurses -lnet -## SysV2 w/o networking & dirlib -#LIBES= -lcurses -ldir -## SysV2 with networking & dirlib -#LIBES= -lcurses -ldir -lnet -## AIX on the IBM 370 or rs6000 or ps2 -#LIBES= -lcurses -lbsd -## ETA10 -#LIBES= -lcurses -lbsd -## Irix3.1 on the SGI-IRIS4D -#LIBES= -lcurses -lbsd -## Irix3.3 on the SGI-IRIS4D w/o yp -#LIBES= -lcurses -lbsd -lc_s -## Irix3.3 on the SGI-IRIS4D with yp -#LIBES= -lcurses -lsun -lbsd -lc_s -## Amdahl UTS 2.1 -#LIBES= -lcurses -lsocket -lbsd -## Intel's hypercube. -#LIBES= -lcurses -lsocket -## ns32000 based Opus. -#LIBES= -lcurses -lsocket -## ISC 2.2 without networking -#LIBES= -lcurses -lcposix -## ISC 2.2 with networking -#LIBES= -lcposix -lc_s -lcurses -linet -## ISC 2.0.2 without networking -#LIBES= -lcurses -lsec -lc_s -## ISC 2.0.2 with networking -#LIBES= -lcurses -linet -lsec -lc_s -## SCO SysVR3.2v2.0 -#LIBES= -lcurses -lintl -lcrypt -## SCO+ODT1.1 -#LIBES= -lcurses -lintl -lsocket -lcrypt -## A/UX 2.0 -#LIBES= -lposix -ltermcap -## A/UX 3.0 -#LIBES= -lposix -ltermcap -lc_s -## att3b1 cc w/o shared lib & dirlib -#LIBES= -ldirent -lcurses -## att3b1 gcc with shared lib & dirlib -#LIBES= -shlib -ldirent -lcurses -## SysV4 with BSDTIMES -#LIBES= -ltermlib -lsocket -lnsl -lc /usr/ucblib/libucb.a -## Stardent Vistra -#LIBES= -lcurses -lnsl -lsocket -lc /usr/ucblib/libucb.a -## emx under OS/2 -#LIBES= -ltermc -## Minix, VMS_POSIX -#LIBES= -## Multiflow -#LIBES= -ltermcap -lcrypt -## NetBSD -#LIBES= -ltermcap -lcrypt -## DDE Supermax -#LIBES= -lcurses - -################################################################ -## EXTRAFLAGS and EXTRALIBS -################################################################ -# Compiling for AFS with kerberos authentication -#AFSLIBDIR = /usr/afsws/lib -#AFSDEF = -DAFS -I/usr/afsws/include -#AFS33LIB = -laudit -# -#Solaris and HPUX require the BSD libraries with AFS. -#We use -lc to use only what we require. -# Solaris -#AFSAUXLIB = -lsocket -lnsl -lc -lucb -# HPUX -#AFSAUXLIB = -lc -lBSD -# -#AFSLIB = -L$(AFSLIBDIR) -L$(AFSLIBDIR)/afs -lkauth -lprot -lubik\ -# -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ -# $(AFSLIBDIR)/afs/util.a $(AFS33LIB) $(AFSAUXLIB) -# - -EXTRAFLAGS = @HESDEF@ $(AFSDEF) -EXTRALIBS = @HESLIB@ $(AFSLIB) @LIBICONV@ - - - -# The difficult choice of a c-compiler... -# First, you should try your own c-compiler. -# Gcc -traditional is also a safe choice. -# If you think that you have good include files try gcc -Wall... -# If you want to take out -traditional, make sure that your sys/ioctl.h -# is fixed correctly, otherwise you'll be stopped for tty input, or you -# will lose the editor and job control. - -# This is for setting your C preprocessor value. -# This is set by autoconf. -CPP = @CPP@ -# The -B tells gcc to use /bin/ld. This is to avoid using the gnu ld, which -# on the suns does not know how to make dynamically linked binaries. -# This is set by autoconf. -CC = @CC@ -#CC= gcc -Wall -Wmissing-prototypes -Wstrict-prototypes -Wpointer-arith -Werror -Wmissing-declarations -Wredundant-decls -Wnested-externs -Wsign-compare -Wcast-qual -Wreturn-type -Wswitch -Wshadow -Wwrite-strings -Wextra -Wcast-qual -Wwrite-strings -Wold-style-definition -Wuninitialized -Wpointer-sign -# -Wconversion -Wformat=2 -ansi -pedantic -#CC= gcc -Wall -pipe -B/bin/ -# Generate code for Intel 486 (linux) -#CC= gcc -m486 -pipe -Wall -# BSDI2.1 w/ shared libraries -#CC= shlicc -#CC= cc -#CC= occ -#CC= acc -#CC= pcc -#CC= hc -w -# For VMS/POSIX -#CC= c89 -# For suns, w/o gcc and SVR4 -#CC= /bin/cc -# FPS 500 (+FPX) with Sun C compiler -#CC= /usr/lib/sun.compile/cc -# Solaris 2.1 -#CC= /opt/SUNWspro/bin/cc -# Alliant fx2800 -#CC= scc -# for NEC SX-4 -#CC= cc -h0,ansi,novector,float0 -#CC= lcc -wa -CC_FOR_GETHOST = @CC_FOR_GETHOST@ -ED= ed -AS= as -RM= rm -CXREF= /usr/ucb/cxref -VGRIND= csh /usr/ucb/vgrind -CTAGS= /usr/ucb/ctags -#XSTR= /usr/ucb/xstr -SCCS= /usr/local/sccs -# Make the multi-max run fast. -PARALLEL=12 -# Use Sequent's parallel make -#P=& -P= -prefix=@prefix@ -exec_prefix=@exec_prefix@ -bindir=@bindir@ -mandir=@datarootdir@/man -MANSECT=1 -DESTBIN=${DESTDIR}${bindir} -DESTMAN=${DESTDIR}${mandir}/man${MANSECT} -# A/UX -# DESTMAN=${DESTDIR}/catman/man${MANSECT} -# Stardent Vistra (SysVR4) -# DESTMAN=${DESTDIR}/usr/share/man/man${MANSECT} -# Amiga unix (SysVR4) -# DESTMAN=/usr/catman/1l -EXEEXT=@EXEEXT@ -FTPAREA=/usr/spool/ftp - -BUILD_CATALOGS = @BUILD_CATALOGS@ - -ASSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.char.c \ - sh.exp.c sh.file.c sh.func.c sh.glob.c sh.hist.c sh.init.c \ - sh.lex.c sh.misc.c sh.parse.c sh.print.c sh.proc.c sh.sem.c \ - sh.set.c sh.time.c sh.char.h sh.dir.h sh.proc.h sh.h \ - tw.color.c -PSSRCS= sh.decls.h glob.c glob.h dotlock.c dotlock.h mi.termios.c mi.wait.h mi.varargs.h ma.setp.c \ - vms.termcap.c -SHSRCS= ${ASSRCS} ${PSSRCS} -SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ - sh.char.${SUF} sh.exp.${SUF} sh.file.${SUF} sh.func.${SUF} \ - sh.glob.${SUF} sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} \ - sh.misc.${SUF} sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.sem.${SUF} sh.set.${SUF} sh.time.${SUF} glob.${SUF} dotlock.${SUF} \ - mi.termios.${SUF} ma.setp.${SUF} vms.termcap.${SUF} - -TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ - tw.comp.c tw.color.c -TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ - tw.comp.${SUF} tw.color.${SUF} - -EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ - ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h -EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ - ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} - -TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ - tc.func.c tc.nls.c tc.os.c tc.os.h tc.printf.c tc.prompt.c \ - tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h tc.vers.c tc.wait.h \ - tc.who.c tc.h -TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ - tc.disc.${SUF} tc.func.${SUF} tc.nls.${SUF} tc.os.${SUF} tc.printf.${SUF} \ - tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ - tc.vers.${SUF} tc.who.${SUF} - -PVSRCS= Makefile.std Makefile.vms Makefile.in Makefile.win32 -AVSRCS= BUILDING Fixes MAKEDIFFS MAKESHAR NewThings README.md FAQ \ - WishList config_f.h eight-bit.me glob.3 patchlevel.h \ - pathnames.h tcsh.man Ported src.desc Imakefile imake.config \ - complete.tcsh vmsreadme.txt termcap.vms snames.h host.defs \ - gethost.c tcsh.man2html configure.ac configure config.h.in \ - tests/testsuite.at aclocal.m4 dot.login dot.tcshrc -TESTFILES= tests/aliases.at tests/arguments.at tests/commands.at \ - tests/expr.at tests/lexical.at tests/mb-eucjp.at \ - tests/mb-utf8.at tests/noexec.at tests/parenthesis.at tests/syntax.at \ - tests/subst.at tests/variables.at tests/sh.dol.at - -VHSRCS=${PVSRCS} ${AVSRCS} - -CONFSRCS=config/* - -ALLSRCS= ${SHSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${VHSRCS} -DISTSRCS= ${PSSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${AVSRCS} $(TESTFILES) - - -OBJS= ${SHOBJS} ${TWOBJS} ${EDOBJS} ${TCOBJS} - - -all: ${BUILD} catalogs - -tcsh$(EXEEXT):$(P) ${OBJS} - rm -f tcsh$(EXEEXT) core - ${CC} -o tcsh$(EXEEXT) ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} - -tcsh.sbin:$(P) ${OBJS} - rm -f tcsh.sbin core - ${CC} -o tcsh.sbin ${SBINLDFLAGS} ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} - -# Purify -pure:$(P) ${OBJS} - rm -f tcsh$(EXEEXT) core - purify `echo ${CC} | sed -e s,-B/bin/,,` -o tcsh$(EXEEXT) ${LDFLAGS} ${CFLAGS} ${CPPFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} -# OS/2 -#tcsh.exe: tcsh -# emxbind tcsh - -gethost: gethost.c sh.err.h tc.const.h sh.h - rm -f gethost - ${CC_FOR_GETHOST} -o gethost ${CPPFLAGS} ${CFLAGS} ${LDFLAGS} $(srcdir)/gethost.c - -tc.defs.c: gethost host.defs - @rm -f $@.tmp - @echo "/* Do not edit this file, make creates it */" > $@.tmp - ./gethost $(srcdir)/host.defs >> $@.tmp - @if [ -f $@ ] && cmp -s $@.tmp $@; then echo $@ unchanged.; rm -f $@.tmp; else mv -f $@.tmp $@; echo $@ recreated.; fi - -tcsh.ps: tcsh.man - rm -f tcsh.ps - -ptroff -t -man $(srcdir)/tcsh.man > tcsh.ps - -.c.${SUF}: - ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< - -.SUFFIXES: .s .i - -.c.i: - ${CC} -E ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< | cat -s > $@ - -.c.s: - ${CC} -S ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< - -# _VMS_POSIX #module addition -#.c.${SUF}: -# @(echo '#module '`echo $< | sed -e 's/\./_/g'`; cat $<) > $*..c -# @echo ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*.c -# @${CC} ${CF} ${CFLAGS} ${CPPFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*..c -# @mv $*..o $*.o -# @rm -f $*..c - - -# Don't do any special massaging of C files for sharing of strings!! -# it causes weird segmentation faults on some systems. -#.c.o: -# ${CPP} ${CFLAGS} ${CPPFLAGS} $*.c | ${XSTR} -c - -# ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} x.c -# mv -f x.o $*.o -# rm -f x.c - -#ed.init.o: ed.init.c -# ${CPP} ${CFLAGS} ${CPPFLAGS} $*.c | ${XSTR} -c - -# ${CC} -R ${CF} ${CFLAGS} ${CPPFLAGS} x.c -# mv -f x.o $*.o -# rm -f x.c - -#strings.o: strings -# ${XSTR} -# ${CC} -c -R xs.c -# mv -f xs.o strings.o -# rm -f xs.c - -##.DEFAULT: -## ${SCCS} get $< - -##.DEFAULT: -## co $< - -ed.defns.h: ed.defns.c - @rm -f $@.tmp - @echo '/* Do not edit this file, make creates it. */' > $@.tmp - @echo '#ifndef _h_ed_defns' >> $@.tmp - @echo '#define _h_ed_defns' >> $@.tmp - grep '[FV]_' $(srcdir)/ed.defns.c | grep '^#define' >> $@.tmp - @echo '#endif /* _h_ed_defns */' >> $@.tmp - @if [ -f $@ ] && cmp -s $@.tmp $@; then echo $@ unchanged.; rm -f $@.tmp; else mv -f $@.tmp $@; echo $@ recreated.; fi - -sh.err.h: sh.err.c - @rm -f $@.tmp - @echo '/* Do not edit this file, make creates it. */' > $@.tmp - @echo '#ifndef _h_sh_err' >> $@.tmp - @echo '#define _h_sh_err' >> $@.tmp - grep 'ERR_' $(srcdir)/sh.err.c | grep '^#define' >> $@.tmp - @echo '#endif /* _h_sh_err */' >> $@.tmp - @if [ -f $@ ] && cmp -s $@.tmp $@; then echo $@ unchanged.; rm -f $@.tmp; else mv -f $@.tmp $@; echo $@ recreated.; fi - -tc.const.h: tc.const.c sh.char.h config.h config_f.h sh.types.h sh.err.h - @rm -f $@.tmp - @echo '/* Do not edit this file, make creates it. */' > $@.tmp - @echo '#ifndef _h_tc_const' >> $@.tmp - @echo '#define _h_tc_const' >> $@.tmp - ${CPP} $(CPPFLAGS) ${DFLAGS} ${EXTRAFLAGS} -D_h_tc_const\ - $(srcdir)/tc.const.c | \ - sed -n -e 's/^\(Char STR[a-zA-Z0-9_]*\) *\[ *\].*/extern \1[];/p' | \ - LC_COLLATE=C sort >> $@.tmp - @echo '#endif /* _h_tc_const */' >> $@.tmp - @if [ -f $@ ] && cmp -s $@.tmp $@; then echo $@ unchanged.; rm -f $@.tmp; else mv -f $@.tmp $@; echo $@ recreated.; fi - -$(srcdir)/tests/package.m4: $(srcdir)/configure.ac - { \ - echo '# Signature of the current package.'; \ - echo 'm4_define([AT_PACKAGE_NAME], [@PACKAGE_NAME@])'; \ - echo 'm4_define([AT_PACKAGE_TARNAME], [@PACKAGE_TARNAME@])'; \ - echo 'm4_define([AT_PACKAGE_VERSION], [@PACKAGE_VERSION@])'; \ - echo 'm4_define([AT_PACKAGE_STRING], [@PACKAGE_STRING@])'; \ - echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \ - } >$(srcdir)/tests/package.m4 - -$(srcdir)/tests/testsuite: $(srcdir)/tests/package.m4 $(srcdir)/tests/testsuite.at $(TESTFILES) - autom4te --language=autotest -I $(srcdir)/tests \ - $(srcdir)/tests/testsuite.at -o $@.tmp - mv $@.tmp $@ - -atconfig: config.status - $(SHELL) ./config.status ./atconfig - - -csh.prof: ${OBJS} sh.prof.${SUF} mcrt0.${SUF} - rm -f csh.prof - ld -X mcrt0.${SUF} ${OBJS} -o csh.prof ${LIBES} -lc - -sh.prof.${SUF}: - cp sh.c sh.prof.c - ${CC} ${CF} ${CFLAGS} ${CPPFLAGS} -DPROF sh.prof.c - -lint: tc.const.h ed.defns.h - lint ${DFLAGS} ${CPPFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -alint: tc.const.h ed.defns.h - alint ${DFLAGS} ${CPPFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -print: - @pr READ_ME - @pr makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -h SIZES - @${CXREF} sh*.c | pr -h XREF - @ls -l | pr - @pr sh*.h [a-rt-z]*.h sh*.c alloc.c - -vprint: - @pr -l84 READ_ME TODO - @pr -l84 makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -l84 -h SIZES - @${CXREF} sh*.c | pr -l84 -h XREF - @ls -l | pr -l84 - @${CXREF} sh*.c | pr -l84 -h XREF - @pr -l84 sh*.h [a-rt-z]*.h sh*.c alloc.c - -vgrind: - @cp /dev/null index - @for i in *.h; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @for i in *.c; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @vgrind -t -x -h Index index >/crp/bill/csh/index.t - -install-strip: install - -strip ${DESTBIN}/tcsh$(EXEEXT) - -install: tcsh$(EXEEXT) install.catalogs install.man - -mkdir -p ${DESTBIN} - -mv -f ${DESTBIN}/tcsh$(EXEEXT) ${DESTBIN}/tcsh.old - cp tcsh$(EXEEXT) ${DESTBIN}/tcsh$(EXEEXT) - chmod 755 ${DESTBIN}/tcsh$(EXEEXT) - -install.catalogs: - @test "x${BUILD_CATALOGS}" = "xyes" && (cd nls; ${MAKE} install DESTDIR=${DESTDIR}) || exit 0 - -install.man: tcsh.man - -mkdir -p ${DESTMAN} - -rm -f ${DESTMAN}/tcsh.${MANSECT} - cp $(srcdir)/tcsh.man ${DESTMAN}/tcsh.${MANSECT} - chmod 444 ${DESTMAN}/tcsh.${MANSECT} - -# Amiga Unix -#install.man: tcsh.man -# compress tcsh.man -# cp tcsh.man.Z ${DESTMAN}/tcsh.Z -# chmod 444 ${DESTMAN}/tcsh.Z - -# Apple A/UX -#install.man: tcsh.man -# -rm -f ${DESTMAN}/tcsh.${MANSECT}.Z -# nroff -man tcsh.man | compress > ${DESTMAN}/tcsh.${MANSECT}.Z -# chmod 444 ${DESTMAN}/tcsh.${MANSECT}.Z - -clean: clean.catalogs - ${RM} -f a.out strings x.c xs.c tcsh$(EXEEXT) tcsh.a _MAKE_LOG gethost - ${RM} -f *.${SUF} *.i *.s - ${RM} -f sh.prof.c ed.defns.h tc.const.h sh.err.h tc.defs.c - ${RM} -f tcsh.*.m tcsh.*.cat - -clean.catalogs: - @test "x${BUILD_CATALOGS}" = "xyes" && (cd nls; ${MAKE} clean) || exit 0 - -veryclean: clean - ${RM} -f Makefile config.h config_p.h - ${RM} -f config.status config.cache config.log tcsh.ps - ${RM} -f missing - ${RM} -f testsuite.log - ${RM} -rf testsuite.dir - ${RM} -rf autom4te.cache - ${RM} -f *~ #* - -distclean: veryclean - -cleandir: veryclean - -tags: /tmp - ${CTAGS} sh*.c - -tar.Z: - rm -f tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -mkdir tcsh-${VERSION} tcsh-${VERSION}/config tcsh-${VERSION}/tests - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tar.gz: - rm -f tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - -mkdir tcsh-${VERSION} tcsh-${VERSION}/config tcsh-${VERSION}/tests - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - -shar: - rm -f tcsh-*.shar - rm -rf tcsh-${VERSION} - -mkdir tcsh-${VERSION} tcsh-${VERSION}/config tcsh-${VERSION}/tests - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ - tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ - tcsh-${VERSION}/?*/set?* - rm -rf tcsh-${VERSION} - -catalogs: - @test "x${BUILD_CATALOGS}" = "xyes" && (cd nls; ${MAKE} catalogs) || exit 0 - -tcsh-${VERSION}.tar.Z: - rm -rf tcsh-${VERSION} - rm -f tcsh-${VERSION}.tar tcsh-${VERSION}.tar.Z DIFFS.[123] - -mkdir tcsh-${VERSION} tcsh-${VERSION}/tests - ./MAKEDIFFS bsd - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh-${VERSION} - cp ${DISTSRCS} tcsh-${VERSION} - -mkdir tcsh-${VERSION}/config - cp ${CONFSRCS} tcsh-${VERSION}/config - cp Makefile tcsh-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tcsh.tahoe-${VERSION}.tar.Z: - rm -rf tcsh.tahoe-${VERSION} - rm -f tcsh.tahoe-${VERSION}.tar tcsh.tahoe-${VERSION}.tar.Z DIFFS.[123] - -mkdir tcsh.tahoe-${VERSION} - ./MAKEDIFFS tahoe - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.tahoe-${VERSION} - cp ${DISTSRCS} tcsh.tahoe-${VERSION} - -mkdir tcsh.tahoe-${VERSION}/config - cp ${CONFSRCS} tcsh.tahoe-${VERSION}/config - cp Makefile tcsh.tahoe-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.tahoe-${VERSION} | compress > tcsh.tahoe-${VERSION}.tar.Z - rm -rf tcsh.tahoe-${VERSION} - -tcsh.reno-${VERSION}.tar.Z: - rm -rf tcsh.reno-${VERSION} - rm -f tcsh.reno-${VERSION}.tar tcsh.reno-${VERSION}.tar.Z DIFFS.[123] - -mkdir tcsh.reno-${VERSION} - ./MAKEDIFFS reno - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.reno-${VERSION} - cp ${DISTSRCS} tcsh.reno-${VERSION} - -mkdir tcsh.reno-${VERSION}/config - cp ${CONFSRCS} tcsh.reno-${VERSION}/config - cp Makefile tcsh.reno-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.reno-${VERSION} | compress > tcsh.reno-${VERSION}.tar.Z - rm -rf tcsh.reno-${VERSION} - -ftp: tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z - cp tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z ${FTPAREA} - cp tcsh.man ${FTPAREA} - -autoconfigure: $(srcdir)/configure $(srcdir)/config.h.in - -$(srcdir)/configure: $(srcdir)/configure.ac - cd $(srcdir) && autoconf - -$(srcdir)/config.h.in: $(srcdir)/stamp-h.in -$(srcdir)/stamp-h.in: $(srcdir)/configure.ac - cd $(srcdir) && autoheader - @echo timestamp > $(srcdir)/stamp-h.in - -check test: atconfig $(srcdir)/tests/testsuite - $(ENVCMD) - \ - USER="$(USER)" \ - $(SHELL) $(srcdir)/tests/testsuite - -# -# Dependencies -# -config.h: config_f.h - -TCH=tc.h tc.const.h tc.decls.h tc.nls.h tc.os.h tc.sig.h -SHH=sh.h sh.types.h sh.char.h sh.err.h sh.dir.h sh.proc.h pathnames.h \ - sh.decls.h ${TCH} -TWH=tw.h tw.decls.h -EDH=ed.h ed.decls.h - -# EDH -EDINC=sh.${SUF} sh.func.${SUF} sh.lex.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.set.${SUF} tc.bind.${SUF} tc.os.${SUF} tc.prompt.${SUF} \ - tc.sched.${SUF} tw.parse.${SUF} tw.color.${SUF} -${EDOBJS} ${EDINC} : ${EDH} - -# SHH -${OBJS}: config.h ${SHH} - -# TWH -TWINC=ed.chared.${SUF} ed.inputl.${SUF} sh.exec.${SUF} sh.func.${SUF} \ - sh.set.${SUF} tc.func.${SUF} tc.nls.${SUF} tw.color.${SUF} -${TWOBJS} ${TWINC}: ${TWH} - -# glob.h -glob.${SUF} sh.glob.${SUF}: glob.h - -# dotlock.h -dotlock.${SUF}: dotlock.h - -# ed.defns.h -EDDINC=tc.bind.${SUF} tc.func.${SUF} tc.os.${SUF} -${EDOBJS} ${EDDINC}: ed.defns.h - -# tc.defs.o -tc.defs.${SUF}: tc.defs.c sh.h diff --git a/contrib/tcsh/Makefile.std b/contrib/tcsh/Makefile.std deleted file mode 100644 index 8c479fa1f213..000000000000 --- a/contrib/tcsh/Makefile.std +++ /dev/null @@ -1,630 +0,0 @@ -# -# C Shell with process control; VM/UNIX VAX Makefile -# Bill Joy UC Berkeley; Jim Kulp IIASA, Austria -# -# With an input editor, command completion, etc. and ported to all sorts of -# things; Paul Placeway, CIS Dept., Ohio State University -# -SHELL=/bin/sh -VERSION=6.12 -BUILD=tcsh -srcdir=. - -################################################################ -## CFLAGS. For various -D things, see config.h -################################################################ -# -# These are the default suffixes from .c to .o and -c to get there -# but to use the global optimizer on the mips boxes, see below -# -SUF=o -CF=-c - -INCLUDES=-I. -I$(srcdir) - -LFLAGS=$(INCLUDES) -#LFLAGS=$(INCLUDES) -Zn10000 # hpux lint - - -#CFLAGS= $(INCLUDES) -g # debug -#CFLAGS= $(INCLUDES) -O # production -#CFLAGS= $(INCLUDES) # Broken optimizers.... - -#CFLAGS= -g -pg $(INCLUDES) -DPROF -#CFLAGS= -O -pg $(INCLUDES) -DPROF - -# gcc 1.00-1.37 -#CFLAGS=-O $(INCLUDES) -finline-functions -fstrength-reduce - -# gcc 1.37-1.40 -#CFLAGS=-O $(INCLUDES) -fcombine-regs -finline-functions -fstrength-reduce -# add -msoft-float for 68881 machines. - -# gcc 2.0 -# On the sparc, don't use -O2; it breaks setjmp() and vfork() -#CFLAGS=-O $(INCLUDES) - -# gcc-2.1+ -CFLAGS=-O2 $(INCLUDES) - -# lucid c on suns -#CFLAGS=-O5 $(INCLUDES) - -# gcc 2.1 on linux -#CFLAGS=-O6 -fomit-frame-pointer $(INCLUDES) - -# HP/UX 8.0, 9.0 -#CFLAGS= $(INCLUDES) +O3 -Aa - -# Ultrix 4.2a -#CFLAGS= $(INCLUDES) -O -Olimit 2000 - -# Intel Paragon OSF/1 with PGI compilers -#CFLAGS=-O -Mnodebug -Mnoperfmon $(INCLUDES) - -# DEC Alpha OSF/1 -#CFLAGS= -O2 $(INCLUDES) -Olimit 2000 ## Normal Optimization -#CFLAGS= -O3 $(INCLUDES) -Olimit 2000 ## Full Optimization - may not work -#CF=-j -#SUF=u -#.SUFFIXES: .u - -# for silicon graphics (and other mips compilers) -- use the -# global optimizer! (-O3). -# On SGI 4.0+ you need to add -D__STDC__ too. -#CFLAGS= -O3 $(INCLUDES) -#CFLAGS= -O3 $(INCLUDES) -Olimit 2000 ## Ultrix 4.2a -#CF=-j -#SUF=u -#.SUFFIXES: .u ## Ultrix and gnu-make need that - -# mips systems -# CFLAGS= $(INCLUDES) -O -systype bsd43 -Wf,-XNd5000 -Wf,-XNp6000 -Olimit 2000 - -# for at&t machines -#CFLAGS= -O -Ksd $(INCLUDES) - -# Stardent Titan -#CFLAGS = $(INCLUDES) -O -43 - -# Stardent Stellar or sunos4 /bin/cc or Solaris2.1 /opt/SUNWspro/bin/cc -#CFLAGS = $(INCLUDES) -O4 - -# Intergraph clipper CLIX 3.1 -#CFLAGS= -w -O2 $(INCLUDES) - -# Dnix 5.3 -#CFLAGS = -O -X7 - -# Pyramid OS/x -#CFLAGS = -OG - -# Multiflow (5M binary... if you choose -O5!) -#CFLAGS = -O5 -sb_trace 0 - -# DDE Supermax Unix SYSV Rel III. -# CFLAGS= -O3 - -# SINIX RMx00 -#CFLAGS= -O # -D_POSIX_SOURCE # -kansi - -# Minix-VMD -# CFLAGS= -O -D_ANSI_H -I /usr/include/bsdcompat $(INCLUDES) - -# Apollo's with cc [apollo builtins don't work with gcc] -# and apollo should not define __STDC__ if it does not have -# the standard header files. RT's (aos4.3) need that too; -# you might want to skip the -O on the rt's... Not very wise. -# AIX/ESA needs -D_IBMESA on command line (this may disappear by GA) -#DFLAGS=-U__STDC__ -#DFLAGS=-D_IBMESA -# On aix2.2.1 we need more compiler space. -#DFLAGS=-Nd4000 -Nn3000 -# AU/X 2.0 needs a flag for POSIX (read the config file) -#DFLAGS=-Zp -# Tektronix 4300 running UTek 4.0 (BSD 4.2) needs: -#DFLAGS = -DUTek -DBSD -# VMS_POSIX needs: -#DFLAGS=-D_VMS_POSIX -# Multiflow and PCC compilers don't like void typedefs. -# You may also need -U__STDC__ if you use pcc (i.e. ibmrt aos4.3). -#DFLAGS=-DMULTIFLOW -#DFLAGS=-DPCC -# DELL SVR4 -#DFLAGS=-DDELL -# SCO_SV -#DFLAGS=-D_SPEED_T -DSCO -DFLAGS= -#DFLAGS=-D_PATH_TCSHELL='"${DESTBIN}/tcsh"' - - -################################################################ -## LDFLAGS. Define something here if you need to -################################################################ -LDFLAGS= ## The simplest, suitable for all. -#LDFLAGS= -s ## Stripped. Takes less space on disk. -#LDFLAGS= -s -n ## Pure executable. Spares paging over -# ## the network for machines with local -# ## swap but external /usr/local/bin . -#LDFLAGS= -s -n -Bstatic ## Without dynamic linking. (SunOS/cc) -#LDFLAGS= -s -n -static ## Without dynamic linking. (SunOS/gcc) -#LDFLAGS= -Wl,-s,-n ## Stripped, shared text (Unicos) -#LDFLAGS= -s -static ## Link statically. (linux) -#LDFLAGS= -s -N ## Impure executable (linux) -#LDFLAGS= -Bdynamic -dy ## SCO_SV - -################################################################ -## LIBES. Pick one, or roll your own. -################################################################ -LIBES= -ltermcap ## BSD style things -#LIBES= -ltermcap ## SunOS, HP-UX, pyramid -#LIBES= -ltermcap ## Linux -#LIBES= -ltermcap -lshadow ## Linux with PW_SHADOW -#LIBES= -ltermcap -lsec ## Tek XD88/10 (UTekV) with PW_SHADOW -#LIBES= -ltermcap -lsec ## Motorola MPC (sysV88) with PW_SHADOW -#LIBES= -ltermcap -lcs ## Mach -#LIBES= -ltermcap -lbsd ## DEC osf1 on the alpha -#LIBES= -ltermcap -lbsd ## Intel paragon -#LIBES= -ltermcap -lbsd ## Clipper intergraph -#LIBES= -ltermcap -lseq ## Sequent's Dynix -#LIBES= -ltermcap -lauth ## Ultrix with Enhanced Security -#LIBES= -ltermcap -ldir -lx ## Xenix 386 style things -#LIBES= -ltermcap -lndir -lsocket -ljobs ## masscomp RTU6.0 -#LIBES= -lcurses ## AIX on the rt -#LIBES= -lcurses ## TitanOS on the stellar -#LIBES= -ltermlib -lsocket -lnsl ## SysV4 w/o BSDTIMES or Solaris 2 -#LIBES= -lcurses ## SysV3 w/o networking -#LIBES= -lcurses -lnet ## SysV3 with networking -#LIBES= -lcurses -ldir ## SysV2 w/o networking & dirlib -#LIBES= -lcurses -ldir -lnet ## SysV2 with networking & dirlib -#LIBES= -lcurses -lbsd ## AIX on the IBM 370 or rs6000 or ps2 -#LIBES= -lcurses -lbsd ## ETA10 -#LIBES= -lcurses -lbsd ## Irix3.1 on the SGI-IRIS4D -#LIBES= -lcurses -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D w/o yp -#LIBES= -lcurses -lsun -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D with yp -#LIBES= -lcurses -lsocket -lbsd ## Amdahl UTS 2.1 -#LIBES= -lcurses -lsocket ## Intel's hypercube. -#LIBES= -lcurses -lsocket ## ns32000 based Opus. -#LIBES= -lcurses -lcposix ## ISC 2.2 without networking -#LIBES= -lcposix -lc_s -lcurses -linet ## ISC 2.2 with networking -#LIBES= -lcurses -lsec -lc_s ## ISC 2.0.2 without networking -#LIBES= -lcurses -linet -lsec -lc_s ## ISC 2.0.2 with networking -#LIBES= -lcurses -lintl -lcrypt ## SCO SysVR3.2v2.0 -#LIBES= -lcurses -lintl -lsocket -lcrypt ## SCO+ODT1.1 -#LIBES= -lcurses -lsocket -lcrypt ## SCO_SV -#LIBES= -lposix -ltermcap ## A/UX 2.0 -#LIBES= -lposix -ltermcap -lc_s ## A/UX 3.0 -#LIBES= -ldirent -lcurses ## att3b1 cc w/o shared lib & dirlib -#LIBES= -shlib -ldirent -lcurses ## att3b1 gcc with shared lib & dirlib -#LIBES= -ltermlib -lsocket -lnsl -lc /usr/ucblib/libucb.a ## SysV4 with BSDTIMES -#LIBES= -lcurses -lnsl -lsocket -lc /usr/ucblib/libucb.a ## Stardent Vistra -#LIBES= -ltermc ## emx under OS/2 -#LIBES= ## Minix, VMS_POSIX -#LIBES= -ltermcap -lcrypt ## Multiflow -#LIBES= -ltermcap -lcrypt ## NetBSD -#LIBES= -lcurses ## DDE Supermax - -################################################################ -## EXTRAFLAGS and EXTRALIBS -################################################################ -# Compiling for HESIOD -#HESDEF = -DHESIOD -I/usr/athena/include -#HESLIB = -L/usr/athena/lib -lhesiod -# -# Compiling for AFS with kerberos authentication -#AFSLIBDIR = /usr/afsws/lib -#AFSDEF = -DAFS -I/usr/afsws/include -#AFS33LIB = -laudit -# -#Solaris and HPUX require the BSD libraries with AFS. -#We use -lc to use only what we require. -#AFSAUXLIB = -lsocket -lnsl -lc -lucb # Solaris -#AFSAUXLIB = -lc -lBSD # HPUX -# -#AFSLIB = -L$(AFSLIBDIR) -L$(AFSLIBDIR)/afs -lkauth -lprot -lubik\ -# -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ -# $(AFSLIBDIR)/afs/util.a $(AFS33LIB) $(AFSAUXLIB) -# - -EXTRAFLAGS = $(HESDEF) $(AFSDEF) -EXTRALIBS = $(HESLIB) $(AFSLIB) - - -# The difficult choice of a c-compiler... -# First, you should try your own c-compiler. -# Gcc -traditional is also a safe choice. -# If you think that you have good include files try gcc -Wall... -# If you want to take out -traditional, make sure that your sys/ioctl.h -# is fixed correctly, otherwise you'll be stopped for tty input, or you -# will lose the editor and job control. - -# This is for setting your C preprocessor value. -CPP = ${CC} -E -# The -B tells gcc to use /bin/ld. This is to avoid using the gnu ld, which -# on the suns does not know how to make dynamically linked binaries. -CC= gcc -Wall -pipe -B/bin/ # -ansi -pedantic -#CC= gcc -m486 -pipe -Wall # Generate code for Intel 486 (linux) -#CC= shlicc # BSDI2.1 w/ shared libraries -#CC= cc -#CC= occ -#CC= acc -#CC= pcc -#CC= hc -w -#CC= c89 # For VMS/POSIX -#CC= /bin/cc # For suns, w/o gcc and SVR4 -#CC= /usr/lib/sun.compile/cc # FPS 500 (+FPX) with Sun C compiler -#CC= /opt/SUNWspro/bin/cc # Solaris 2.1 -#CC= scc # Alliant fx2800 -#CC= lcc -wa -#CC= cc -b elf -Kpic # SCO_SV -ED= ed -AS= as -RM= rm -CXREF= /usr/ucb/cxref -#CXREF= /bin/cxref # SCO_SV -VGRIND= csh /usr/ucb/vgrind -CTAGS= /usr/ucb/ctags -#CTAGS= /usr/bin/ctags # SCO_SV -#XSTR= /usr/ucb/xstr -#XSTR= /usr/bin/xstr # SCO_SV -SCCS= /usr/local/sccs -PARALLEL=12 # Make the multi-max run fast. -#P=& # Use Sequent's parallel make -P= -DESTDIR=/usr/local -#DESTDIR=/usr/contrib -MANSECT=1 -DESTBIN=${DESTDIR}/bin -DESTMAN=${DESTDIR}/man/man${MANSECT} -# DESTMAN=${DESTDIR}/catman/man${MANSECT} # A/UX -# DESTMAN=${DESTDIR}/usr/share/man/man${MANSECT} # Stardent Vistra (SysVR4) -# DESTMAN=/usr/catman/1l # Amiga unix (SysVR4) -FTPAREA=/usr/spool/ftp - -ASSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.char.c \ - sh.exp.c sh.file.c sh.func.c sh.glob.c sh.hist.c sh.init.c \ - sh.lex.c sh.misc.c sh.parse.c sh.print.c sh.proc.c sh.sem.c \ - sh.set.c sh.time.c sh.char.h sh.dir.h sh.proc.h sh.h -PSSRCS= sh.decls.h glob.c glob.h dotlock.c dotlock.h mi.termios.c mi.wait.h mi.varargs.h ma.setp.c \ - vms.termcap.c -SHSRCS= ${ASSRCS} ${PSSRCS} -SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ - sh.char.${SUF} sh.exp.${SUF} sh.file.${SUF} sh.func.${SUF} \ - sh.glob.${SUF} sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} \ - sh.misc.${SUF} sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.sem.${SUF} sh.set.${SUF} sh.time.${SUF} glob.${SUF} dotlock.${SUF} \ - mi.termios.${SUF} ma.setp.${SUF} vms.termcap.${SUF} - -TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ - tw.comp.c tw.color.c -TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ - tw.comp.${SUF} tw.color.${SUF} - -EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ - ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h -EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ - ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} - -TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ - tc.func.c tc.nls.c tc.os.c tc.os.h tc.printf.c tc.prompt.c \ - tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h tc.vers.c tc.wait.h \ - tc.who.c tc.h -TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ - tc.disc.${SUF} tc.func.${SUF} tc.nls.${SUF} tc.os.${SUF} tc.printf.${SUF} \ - tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ - tc.vers.${SUF} tc.who.${SUF} - -PVSRCS= Makefile.std Makefile.vms Makefile.in Makefile.win32 -AVSRCS= BUILDING Fixes MAKEDIFFS MAKESHAR NewThings README.md FAQ \ - WishList config_f.h eight-bit.me glob.3 patchlevel.h \ - pathnames.h tcsh.man Ported src.desc Imakefile imake.config \ - complete.tcsh vmsreadme.txt termcap.vms snames.h host.defs \ - gethost.c tcsh.man2html configure.ac configure config.h.in \ - aclocal.m4 dot.login dot.tcshrc - -VHSRCS=${PVSRCS} ${AVSRCS} - -CONFSRCS=config/* - -ALLSRCS= ${SHSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${VHSRCS} -DISTSRCS= ${PSSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${AVSRCS} - - -OBJS= ${SHOBJS} ${TWOBJS} ${EDOBJS} ${TCOBJS} - - -all: ${BUILD} - -tcsh:$(P) ${OBJS} - rm -f tcsh core - ${CC} -o tcsh ${LDFLAGS} ${CFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} - -# Purify -pure:$(P) ${OBJS} - rm -f tcsh core - purify `echo ${CC} | sed -e s,-B/bin/,,` -o tcsh ${LDFLAGS} ${CFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} -# OS/2 -tcsh.exe: tcsh - emxbind tcsh - -gethost: gethost.c sh.err.h tc.const.h sh.h - rm -f gethost - ${CC} -o gethost ${LDFLAGS} ${CFLAGS} ${DFLAGS} $(srcdir)/gethost.c ${LIBES} ${EXTRALIBS} - -tc.defs.c: gethost host.defs - @rm -f $@ - @echo "/* Do not edit this file, make creates it */" > $@ - ./gethost $(srcdir)/host.defs >> $@ - -tcsh.ps: tcsh.man - rm -f tcsh.ps - -ptroff -t -man $(srcdir)/tcsh.man > tcsh.ps - - -.c.${SUF}: - ${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< - -# _VMS_POSIX #module addition -#.c.${SUF}: -# @(echo '#module '`echo $< | sed -e 's/\./_/g'`; cat $<) > $*..c -# @echo ${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*.c -# @${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*..c -# @mv $*..o $*.o -# @rm -f $*..c - - -# Don't do any special massaging of C files for sharing of strings!! -# it causes weird segmentation faults on some systems. -#.c.o: -# ${CPP} ${CFLAGS} $*.c | ${XSTR} -c - -# ${CC} ${CF} ${CFLAGS} x.c -# mv -f x.o $*.o -# rm -f x.c - -#ed.init.o: ed.init.c -# ${CPP} ${CFLAGS} $*.c | ${XSTR} -c - -# ${CC} -R ${CF} ${CF} x.c -# mv -f x.o $*.o -# rm -f x.c - -#strings.o: strings -# ${XSTR} -# ${CC} -c -R xs.c -# mv -f xs.o strings.o -# rm -f xs.c - -##.DEFAULT: -## ${SCCS} get $< - -##.DEFAULT: -## co $< - -ed.defns.h: ed.defns.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_ed_defns' >> $@ - @echo '#define _h_ed_defns' >> $@ - grep '[FV]_' $(srcdir)/ed.defns.c | grep '^#define' >> $@ - @echo '#endif /* _h_ed_defns */' >> $@ - -sh.err.h: sh.err.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_sh_err' >> $@ - @echo '#define _h_sh_err' >> $@ - grep 'ERR_' $(srcdir)/sh.err.c | grep '^#define' >> $@ - @echo '#endif /* _h_sh_err */' >> $@ - -tc.const.h: tc.const.c sh.char.h config.h config_f.h sh.types.h sh.err.h - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '#ifndef _h_tc_const' >> $@ - @echo '#define _h_tc_const' >> $@ - ${CPP} $(INCLUDES) ${DFLAGS} ${EXTRAFLAGS} -D_h_tc_const\ - $(srcdir)/tc.const.c | grep 'Char STR' | \ - sed -e 's/Char \([a-zA-Z0-9_]*\) *\[ *\].*/extern Char \1[];/' | \ - LC_COLLATE=C sort >> $@ - @echo '#endif /* _h_tc_const */' >> $@ - -csh.prof: ${OBJS} sh.prof.${SUF} mcrt0.${SUF} - rm -f csh.prof - ld -X mcrt0.${SUF} ${OBJS} -o csh.prof ${LIBES} -lc - -sh.prof.${SUF}: - cp sh.c sh.prof.c - ${CC} ${CF} ${CFLAGS} -DPROF sh.prof.c - -lint: tc.const.h ed.defns.h - lint ${DFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -alint: tc.const.h ed.defns.h - alint ${DFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -print: - @pr READ_ME - @pr makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -h SIZES - @${CXREF} sh*.c | pr -h XREF - @ls -l | pr - @pr sh*.h [a-rt-z]*.h sh*.c alloc.c - -vprint: - @pr -l84 READ_ME TODO - @pr -l84 makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -l84 -h SIZES - @${CXREF} sh*.c | pr -l84 -h XREF - @ls -l | pr -l84 - @${CXREF} sh*.c | pr -l84 -h XREF - @pr -l84 sh*.h [a-rt-z]*.h sh*.c alloc.c - -vgrind: - @cp /dev/null index - @for i in *.h; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @for i in *.c; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @vgrind -t -x -h Index index >/crp/bill/csh/index.t - -install: tcsh - -mv -f ${DESTBIN}/tcsh ${DESTBIN}/tcsh.old - cp tcsh ${DESTBIN}/tcsh - -strip ${DESTBIN}/tcsh - chmod 555 ${DESTBIN}/tcsh - -install.man: tcsh.man - -rm -f ${DESTMAN}/tcsh.${MANSECT} - cp $(srcdir)/tcsh.man ${DESTMAN}/tcsh.${MANSECT} - chmod 444 ${DESTMAN}/tcsh.${MANSECT} - -# Amiga Unix -#install.man: tcsh.man -# compress tcsh.man -# cp tcsh.man.Z ${DESTMAN}/tcsh.Z -# chmod 444 ${DESTMAN}/tcsh.Z - -# Apple A/UX -#install.man: tcsh.man -# -rm -f ${DESTMAN}/tcsh.${MANSECT}.Z -# nroff -man tcsh.man | compress > ${DESTMAN}/tcsh.${MANSECT}.Z -# chmod 444 ${DESTMAN}/tcsh.${MANSECT}.Z - -clean: - ${RM} -f a.out strings x.c xs.c tcsh tcsh.a _MAKE_LOG core gethost - ${RM} -f *.${SUF} sh.prof.c ed.defns.h tc.const.h sh.err.h tc.defs.c - ${RM} -f tcsh.*.m tcsh.*.cat - -veryclean: clean - ${RM} -f config.h config.status config.cache config.log Makefile tcsh.ps - ${RM} -f *~ #* - -distclean: veryclean - -tags: /tmp - ${CTAGS} sh*.c - -tar.Z: - rm -f tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tar.gz: - rm -f tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - -shar: - rm -f tcsh-*.shar - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ - tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ - tcsh-${VERSION}/?*/set?* - rm -rf tcsh-${VERSION} - -catalogs: - @(cd nls; make catalogs) - -tcsh-${VERSION}.tar.Z: - rm -rf tcsh-${VERSION} - rm -f tcsh-${VERSION}.tar tcsh-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh-${VERSION} - ./MAKEDIFFS bsd - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh-${VERSION} - cp ${DISTSRCS} tcsh-${VERSION} - mkdir tcsh-${VERSION}/config - cp ${CONFSRCS} tcsh-${VERSION}/config - cp Makefile tcsh-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tcsh.tahoe-${VERSION}.tar.Z: - rm -rf tcsh.tahoe-${VERSION} - rm -f tcsh.tahoe-${VERSION}.tar tcsh.tahoe-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh.tahoe-${VERSION} - ./MAKEDIFFS tahoe - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.tahoe-${VERSION} - cp ${DISTSRCS} tcsh.tahoe-${VERSION} - mkdir tcsh.tahoe-${VERSION}/config - cp ${CONFSRCS} tcsh.tahoe-${VERSION}/config - cp Makefile tcsh.tahoe-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.tahoe-${VERSION} | compress > tcsh.tahoe-${VERSION}.tar.Z - rm -rf tcsh.tahoe-${VERSION} - -tcsh.reno-${VERSION}.tar.Z: - rm -rf tcsh.reno-${VERSION} - rm -f tcsh.reno-${VERSION}.tar tcsh.reno-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh.reno-${VERSION} - ./MAKEDIFFS reno - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.reno-${VERSION} - cp ${DISTSRCS} tcsh.reno-${VERSION} - mkdir tcsh.reno-${VERSION}/config - cp ${CONFSRCS} tcsh.reno-${VERSION}/config - cp Makefile tcsh.reno-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.reno-${VERSION} | compress > tcsh.reno-${VERSION}.tar.Z - rm -rf tcsh.reno-${VERSION} - -ftp: tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z - cp tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z ${FTPAREA} - cp tcsh.man ${FTPAREA} - -autoconfigure: $(srcdir)/configure $(srcdir)/config.h.in - -$(srcdir)/configure: $(srcdir)/configure.ac - cd $(srcdir) && autoconf - -$(srcdir)/config.h.in: $(srcdir)/stamp-h.in -$(srcdir)/stamp-h.in: $(srcdir)/configure.ac - cd $(srcdir) && autoheader - @echo timestamp > $(srcdir)/stamp-h.in - -# -# Dependencies -# -config.h: config_f.h - -TCH=tc.h tc.const.h tc.decls.h tc.nls.h tc.os.h tc.sig.h -SHH=sh.h sh.types.h sh.char.h sh.err.h sh.dir.h sh.proc.h pathnames.h \ - sh.decls.h ${TCH} -TWH=tw.h tw.decls.h -EDH=ed.h ed.decls.h - -# EDH -EDINC=sh.${SUF} sh.func.${SUF} sh.lex.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.set.${SUF} tc.bind.${SUF} tc.os.${SUF} tc.prompt.${SUF} \ - tc.sched.${SUF} tw.parse.${SUF} tw.color.${SUF} -${EDOBJS} ${EDINC} : ${EDH} - -# SHH -${OBJS}: config.h ${SHH} - -# TWH -TWINC=ed.chared.${SUF} ed.inputl.${SUF} sh.exec.${SUF} sh.func.${SUF} \ - sh.set.${SUF} tc.func.${SUF} tc.nls.${SUF} tw.color.${SUF} -${TWOBJS} ${TWINC}: ${TWH} - -# glob.h -glob.${SUF} sh.glob.${SUF}: glob.h - -# dotlock.h -dotlock.${SUF}: dotlock.h - -# ed.defns.h -EDDINC=tc.bind.${SUF} tc.func.${SUF} tc.os.${SUF} -${EDOBJS} ${EDDINC}: ed.defns.h - -# tc.defs.o -tc.defs.${SUF}: tc.defs.c sh.h diff --git a/contrib/tcsh/Makefile.vms b/contrib/tcsh/Makefile.vms deleted file mode 100644 index 2e3f4adbfed4..000000000000 --- a/contrib/tcsh/Makefile.vms +++ /dev/null @@ -1,592 +0,0 @@ -# -# C Shell with process control; VM/UNIX VAX Makefile -# Bill Joy UC Berkeley; Jim Kulp IIASA, Austria -# -# With an input editor, command completion, etc. and ported to all sorts of -# things; Paul Placeway, CIS Dept., Ohio State University -# -SHELL=/bin/sh -VERSION=6.12 -BUILD=tcsh - -################################################################ -## CFLAGS. For various -D things, see config.h -################################################################ -# -# These are the default suffixes from .c to .o and -c to get there -# but to use the global optimizer on the mips boxes, see below -# -SUF=o -CF=-c - -INCLUDES=-I. -I.. - -LFLAGS=$(INCLUDES) -#LFLAGS=$(INCLUDES) -Zn10000 # hpux lint - - -#CFLAGS= $(INCLUDES) -g # debug -#CFLAGS= $(INCLUDES) -O # production -#CFLAGS= $(INCLUDES) # Broken optimizers.... - -#CFLAGS= -g -pg $(INCLUDES) -DPROF -#CFLAGS= -O -pg $(INCLUDES) -DPROF - -# gcc 1.00-1.37 -#CFLAGS=-O $(INCLUDES) -finline-functions -fstrength-reduce - -# gcc 1.37-1.40 -#CFLAGS=-O $(INCLUDES) -fcombine-regs -finline-functions -fstrength-reduce -# add -msoft-float for 68881 machines. - -# gcc 2.0 -# On the sparc, don't use -O2; it breaks setjmp() and vfork() -#CFLAGS=-O $(INCLUDES) - -# gcc-2.1+ -#CFLAGS=-O2 $(INCLUDES) - -# lucid c on suns -#CFLAGS=-O5 $(INCLUDES) - -# gcc 2.1 on linux -#CFLAGS=-O6 -fomit-frame-pointer $(INCLUDES) - -# HP/UX 8.0, 9.0 -#CFLAGS= $(INCLUDES) +O3 -Aa - -# Ultrix 4.2a -#CFLAGS= $(INCLUDES) -O -Olimit 2000 - -# Intel Paragon OSF/1 with PGI compilers -#CFLAGS=-O -Mnodebug -Mnoperfmon $(INCLUDES) - -# DEC Alpha OSF/1 -#CFLAGS= -O2 $(INCLUDES) -Olimit 2000 ## Normal Optimization -#CFLAGS= -O3 $(INCLUDES) -Olimit 2000 ## Full Optimization - may not work -#CF=-j -#SUF=u -#.SUFFIXES: .u - -# for silicon graphics (and other mips compilers) -- use the -# global optimizer! (-O3). -# On SGI 4.0+ you need to add -D__STDC__ too. -#CFLAGS= -O3 $(INCLUDES) -#CFLAGS= -O3 $(INCLUDES) -Olimit 2000 ## Ultrix 4.2a -#CF=-j -#SUF=u -#.SUFFIXES: .u ## Ultrix and gnu-make need that - -# mips systems -# CFLAGS= $(INCLUDES) -O -systype bsd43 -Wf,-XNd5000 -Wf,-XNp6000 -Olimit 2000 - -# for at&t machines -#CFLAGS= -O -Ksd $(INCLUDES) - -# Stardent Titan -#CFLAGS = $(INCLUDES) -O -43 - -# Stardent Stellar or sunos4 /bin/cc or Solaris2.1 /opt/SUNWspro/bin/cc -#CFLAGS = $(INCLUDES) -O4 - -# Intergraph clipper CLIX 3.1 -#CFLAGS= -w -O2 $(INCLUDES) - -# Dnix 5.3 -#CFLAGS = -O -X7 - -# Pyramid OS/x -#CFLAGS = -OG - -# Multiflow (5M binary... if you choose -O5!) -#CFLAGS = -O5 -sb_trace 0 - -# DDE Supermax Unix SYSV Rel III. -# CFLAGS= -O3 - -# Apollo's with cc [apollo builtins don't work with gcc] -# and apollo should not define __STDC__ if it does not have -# the standard header files. RT's (aos4.3) need that too; -# you might want to skip the -O on the rt's... Not very wise. -# AIX/ESA needs -D_IBMESA on command line (this may disappear by GA) -#DFLAGS=-U__STDC__ -#DFLAGS=-D_IBMESA -# On aix2.2.1 we need more compiler space. -#DFLAGS=-Nd4000 -Nn3000 -# AU/X 2.0 needs a flag for POSIX (read the config file) -#DFLAGS=-Zp -# Tektronix 4300 running UTek 4.0 (BSD 4.2) needs: -#DFLAGS = -DUTek -DBSD -# VMS_POSIX needs: -#DFLAGS=-D_VMS_POSIX -# Multiflow -#DFLAGS=-DMULTIFLOW -# DELL SVR4 -#DFLAGS=-DDELL -DFLAGS= -#DFLAGS=-D_PATH_TCSHELL='"${DESTBIN}/tcsh"' - - -################################################################ -## LDFLAGS. Define something here if you need to -################################################################ -LDFLAGS= ## The simplest, suitable for all. -#LDFLAGS= -s ## Stripped. Takes less space on disk. -#LDFLAGS= -s -n ## Pure executable. Spares paging over -# ## the network for machines with local -# ## swap but external /usr/local/bin . -#LDFLAGS= -s -n -Bstatic ## Without dynamic links. (SunOS) -#LDFLAGS= -Wl,-s,-n ## Stripped, shared text (Unicos) -#LDFLAGS= -s -static ## Link statically. (linux) -#LDFLAGS= -s -N ## Impure executable (linux) - -################################################################ -## LIBES. Pick one, or roll your own. -################################################################ -#LIBES= -ltermcap ## BSD style things -#LIBES= -ltermcap ## SunOS, HP-UX, pyramid -#LIBES= -ltermcap ## Linux -#LIBES= -ltermcap -lshadow ## Linux with PW_SHADOW -#LIBES= -ltermcap -lsec ## Tek XD88/10 (UTekV) with PW_SHADOW -#LIBES= -ltermcap -lsec ## Motorola MPC (sysV88) with PW_SHADOW -#LIBES= -ltermcap -lcs ## Mach -#LIBES= -ltermcap -lbsd ## DEC osf1 on the alpha -#LIBES= -ltermcap -lbsd ## Intel paragon -#LIBES= -ltermcap -lbsd ## Clipper intergraph -#LIBES= -ltermcap -lseq ## Sequent's Dynix -#LIBES= -ltermcap -lauth ## Ultrix with Enhanced Security -#LIBES= -ltermcap -ldir -lx ## Xenix 386 style things -#LIBES= -ltermcap -lndir -lsocket -ljobs ## masscomp RTU6.0 -#LIBES= -lcurses ## AIX on the rt -#LIBES= -lcurses ## TitanOS on the stellar -#LIBES= -ltermlib -lsocket -lnsl ## SysV4 w/o BSDTIMES or Solaris 2 -#LIBES= -lcurses ## SysV3 w/o networking -#LIBES= -lcurses -lnet ## SysV3 with networking -#LIBES= -lcurses -ldir ## SysV2 w/o networking & dirlib -#LIBES= -lcurses -ldir -lnet ## SysV2 with networking & dirlib -#LIBES= -lcurses -lbsd ## AIX on the IBM 370 or rs6000 or ps2 -#LIBES= -lcurses -lbsd ## ETA10 -#LIBES= -lcurses -lbsd ## Irix3.1 on the SGI-IRIS4D -#LIBES= -lcurses -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D w/o yp -#LIBES= -lcurses -lsun -lbsd -lc_s ## Irix3.3 on the SGI-IRIS4D with yp -#LIBES= -lcurses -lsocket -lbsd ## Amdahl UTS 2.1 -#LIBES= -lcurses -lsocket ## Intel's hypercube. -#LIBES= -lcurses -lsocket ## ns32000 based Opus. -#LIBES= -lcurses -lcposix ## ISC 2.2 without networking -#LIBES= -lcposix -lc_s -lcurses -linet ## ISC 2.2 with networking -#LIBES= -lcurses -lsec -lc_s ## ISC 2.0.2 without networking -#LIBES= -lcurses -linet -lsec -lc_s ## ISC 2.0.2 with networking -#LIBES= -lcurses -lintl -lcrypt ## SCO SysVR3.2v2.0 -#LIBES= -lcurses -lintl -lsocket -lcrypt ## SCO+ODT1.1 -#LIBES= -lposix -ltermcap ## A/UX 2.0 -#LIBES= -lposix -ltermcap -lc_s ## A/UX 3.0 -#LIBES= -ldirent -lcurses ## att3b1 cc w/o shared lib & dirlib -#LIBES= -shlib -ldirent -lcurses ## att3b1 gcc with shared lib & dirlib -#LIBES= -ltermlib -lsocket -lnsl -lc /usr/ucblib/libucb.a ## SysV4 with BSDTIMES -#LIBES= -lcurses -lnsl -lsocket -lc /usr/ucblib/libucb.a ## Stardent Vistra -#LIBES= -ltermc ## emx under OS/2 -LIBES= ## Minix, VMS_POSIX -#LIBES= -ltermcap -lcrypt ## Multiflow -#LIBES= -ltermcap -lcrypt ## NetBSD -#LIBES= -lcurses ## DDE Supermax - -################################################################ -## EXTRAFLAGS and EXTRALIBS -################################################################ -# Compiling for HESIOD -#HESDEF = -DHESIOD -I/usr/athena/include -#HESLIB = -L/usr/athena/lib -lhesiod -# -# Compiling for AFS with kerberos authentication -#AFSLIBDIR = /usr/afsws/lib -#AFSDEF = -DAFS -I/usr/afsws/include -#AFS33LIB = -laudit -# -#Solaris and HPUX require the BSD libraries with AFS. -#We use -lc to use only what we require. -#AFSAUXLIB = -lsocket -lnsl -lc -lucb # Solaris -#AFSAUXLIB = -lc -lBSD # HPUX -# -#AFSLIB = -L$(AFSLIBDIR) -L$(AFSLIBDIR)/afs -lkauth -lprot -lubik\ -# -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err\ -# $(AFSLIBDIR)/afs/util.a $(AFS33LIB) $(AFSAUXLIB) -# - -EXTRAFLAGS = $(HESDEF) $(AFSDEF) -EXTRALIBS = $(HESLIB) $(AFSLIB) - - -# The difficult choice of a c-compiler... -# First, you should try your own c-compiler. -# Gcc -traditional is also a safe choice. -# If you think that you have good include files try gcc -Wall... -# If you want to take out -traditional, make sure that your sys/ioctl.h -# is fixed correctly, otherwise you'll be stopped for tty input, or you -# will lose the editor and job control. - -# The -B tells gcc to use /bin/ld. This is to avoid using the gnu ld, which -# on the suns does not know how to make dynamically linked binaries. -#CC= gcc -Wall -pipe -B/bin/ # -ansi -pedantic -#CC= gcc -m486 -pipe -Wall # Generate code for Intel 486 (linux) -#CC= cc -#CC= occ -#CC= acc -#CC= pcc -#CC= hc -w -CC= c89 # For VMS/POSIX -#CC= /bin/cc # For suns, w/o gcc and SVR4 -#CC= /usr/lib/sun.compile/cc # FPS 500 (+FPX) with Sun C compiler -#CC= /opt/SUNWspro/bin/cc # Solaris 2.1 -#CC= scc # Alliant fx2800 -#CC= lcc -wa -ED= ed -AS= as -RM= rm -CXREF= /usr/ucb/cxref -VGRIND= csh /usr/ucb/vgrind -CTAGS= /usr/ucb/ctags -#XSTR= /usr/ucb/xstr -SCCS= /usr/local/sccs -PARALLEL=12 # Make the multi-max run fast. -#P=& # Use Sequent's parallel make -P= -DESTDIR=/usr/local -MANSECT=1 -DESTBIN=${DESTDIR}/bin -DESTMAN=${DESTDIR}/man/man${MANSECT} -# DESTMAN=${DESTDIR}/catman/man${MANSECT} # A/UX -# DESTMAN=${DESTDIR}/usr/share/man/man${MANSECT} # Stardent Vistra (SysVR4) -# DESTMAN=/usr/catman/1l # Amiga unix (SysVR4) -FTPAREA=/usr/spool/ftp - -ASSRCS= sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.char.c \ - sh.exp.c sh.file.c sh.func.c sh.glob.c sh.hist.c sh.init.c \ - sh.lex.c sh.misc.c sh.parse.c sh.print.c sh.proc.c sh.sem.c \ - sh.set.c sh.time.c sh.char.h sh.dir.h sh.proc.h sh.h -PSSRCS= sh.decls.h glob.c glob.h mi.termios.c mi.wait.h mi.varargs.h ma.setp.c \ - vms.termcap.c -SHSRCS= ${ASSRCS} ${PSSRCS} -SHOBJS= sh.${SUF} sh.dir.${SUF} sh.dol.${SUF} sh.err.${SUF} sh.exec.${SUF} \ - sh.char.${SUF} sh.exp.${SUF} sh.func.${SUF} sh.glob.${SUF} \ - sh.hist.${SUF} sh.init.${SUF} sh.lex.${SUF} sh.misc.${SUF} \ - sh.parse.${SUF} sh.print.${SUF} sh.proc.${SUF} sh.sem.${SUF} \ - sh.set.${SUF} sh.time.${SUF} glob.${SUF} mi.termios.${SUF} \ - ma.setp.${SUF} vms.termcap.${SUF} - -TWSRCS= tw.decls.h tw.h tw.help.c tw.init.c tw.parse.c tw.spell.c \ - tw.comp.c tw.color.c -TWOBJS= tw.help.${SUF} tw.init.${SUF} tw.parse.${SUF} tw.spell.${SUF} \ - tw.comp.${SUF} tw.color.${SUF} - -EDSRCS= ed.chared.c ed.decls.h ed.defns.c ed.h ed.init.c ed.inputl.c \ - ed.refresh.c ed.screen.c ed.xmap.c ed.term.c ed.term.h -EDOBJS= ed.chared.${SUF} ed.refresh.${SUF} ed.screen.${SUF} ed.init.${SUF} \ - ed.inputl.${SUF} ed.defns.${SUF} ed.xmap.${SUF} ed.term.${SUF} - -TCSRCS= tc.alloc.c tc.bind.c tc.const.c tc.decls.h tc.disc.c \ - tc.func.c tc.os.c tc.os.c tc.os.h tc.printf.c tc.prompt.c \ - tc.sched.c tc.sig.c tc.sig.h tc.str.c sh.types.h tc.vers.c tc.wait.h \ - tc.who.c tc.h -TCOBJS= tc.alloc.${SUF} tc.bind.${SUF} tc.const.${SUF} tc.defs.${SUF} \ - tc.disc.${SUF} tc.func.${SUF} tc.os.${SUF} tc.os.${SUF} tc.printf.${SUF} \ - tc.prompt.${SUF} tc.sched.${SUF} tc.sig.${SUF} tc.str.${SUF} \ - tc.vers.${SUF} tc.who.${SUF} - -PVSRCS= Makefile.std Makefile.vms Makefile.in Makefile.win32 -AVSRCS= BUILDING Fixes MAKEDIFFS MAKESHAR NewThings README.md FAQ \ - WishList config_f.h eight-bit.me glob.3 patchlevel.h \ - pathnames.h tcsh.man Ported src.desc Imakefile imake.config \ - complete.tcsh vmsreadme.txt termcap.vms snames.h host.defs \ - gethost.c tcsh.man2html configure.ac aclocal.m4 dot.login dot.tcshrc - -VHSRCS=${PVSRCS} ${AVSRCS} - -CONFSRCS=config/* - -ALLSRCS= ${SHSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${VHSRCS} -DISTSRCS= ${PSSRCS} ${TWSRCS} ${EDSRCS} ${TCSRCS} ${AVSRCS} - - -OBJS= ${SHOBJS} ${TWOBJS} ${EDOBJS} ${TCOBJS} - - -all: ${BUILD} - -tcsh:$(P) ${OBJS} - rm -f tcsh core - ${CC} -o tcsh ${LDFLAGS} ${CFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} - -# Purify -pure:$(P) ${OBJS} - rm -f tcsh core - purify `echo ${CC} | sed -e s,-B/bin/,,` -o tcsh ${LDFLAGS} ${CFLAGS} ${OBJS} ${LIBES} ${EXTRALIBS} -# OS/2 -tcsh.exe: tcsh - emxbind tcsh - -gethost: gethost.c sh.err.h tc.const.h sh.h - rm -f gethost - ${CC} -o gethost ${LDFLAGS} ${CFLAGS} ${DFLAGS} gethost.c ${LIBES} ${EXTRALIBS} - -tc.defs.c: gethost host.defs - @rm -f $@ - @echo "/* Do not edit this file, make creates it */" > $@ - ./gethost host.defs >> $@ - -tcsh.ps: tcsh.man - rm -f tcsh.ps - -ptroff -man tcsh.man > tcsh.ps - - -#.c.${SUF}: -# ${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $< - -# _VMS_POSIX #module addition -.c.${SUF}: - @(echo '\#module '`echo $< | sed -e 's/\./_/g'`; cat $<) > $*..c - @echo ${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*.c - @${CC} ${CF} ${CFLAGS} ${DFLAGS} ${EXTRAFLAGS} $*..c - @mv $*..o $*.o - @rm -f $*..c - - -# Don't do any special massaging of C files for sharing of strings!! -# it causes weird segmentation faults on some systems. -#.c.o: -# ${CC} -E ${CFLAGS} $*.c | ${XSTR} -c - -# ${CC} ${CF} ${CFLAGS} x.c -# mv -f x.o $*.o -# rm -f x.c - -#ed.init.o: ed.init.c -# ${CC} -E ${CFLAGS} $*.c | ${XSTR} -c - -# ${CC} -R ${CF} ${CF} x.c -# mv -f x.o $*.o -# rm -f x.c - -#strings.o: strings -# ${XSTR} -# ${CC} -c -R xs.c -# mv -f xs.o strings.o -# rm -f xs.c - -##.DEFAULT: -## ${SCCS} get $< - -##.DEFAULT: -## co $< - -ed.defns.h: ed.defns.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '\#ifndef _h_ed_defns' >> $@ - @echo '\#define _h_ed_defns' >> $@ - grep '[FV]_' ed.defns.c | grep '^\#define' >> $@ - @echo '\#endif /* _h_ed_defns */' >> $@ - -sh.err.h: sh.err.c - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '\#ifndef _h_sh_err' >> $@ - @echo '\#define _h_sh_err' >> $@ - grep 'ERR_' sh.err.c | grep '^#define' >> $@ - @echo '\#endif /* _h_sh_err */' >> $@ - -tc.const.h: tc.const.c sh.char.h config.h config_f.h sh.types.h sh.err.h - @rm -f $@ - @echo '/* Do not edit this file, make creates it. */' > $@ - @echo '\#ifndef _h_tc_const' >> $@ - @echo '\#define _h_tc_const' >> $@ - ${CC} -E $(INCLUDES) ${DFLAGS} -D_h_tc_const tc.const.c | \ - grep 'Char STR' | \ - sed -e 's/Char \([a-zA-Z0-9_]*\) *\[ *\].*/extern Char \1[];/' | \ - sort >> $@ - @echo '\#endif /* _h_tc_const */' >> $@ - -csh.prof: ${OBJS} sh.prof.${SUF} mcrt0.${SUF} - rm -f csh.prof - ld -X mcrt0.${SUF} ${OBJS} -o csh.prof ${LIBES} -lc - -sh.prof.${SUF}: - cp sh.c sh.prof.c - ${CC} ${CF} ${CFLAGS} -DPROF sh.prof.c - -lint: tc.const.h ed.defns.h - lint ${DFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -alint: tc.const.h ed.defns.h - alint ${DFLAGS} ${LFLAGS} sh*.c tw*.c ed*.c tc.*.c ${LIBES} - -print: - @pr READ_ME - @pr makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -h SIZES - @${CXREF} sh*.c | pr -h XREF - @ls -l | pr - @pr sh*.h [a-rt-z]*.h sh*.c alloc.c - -vprint: - @pr -l84 READ_ME TODO - @pr -l84 makefile makefile.* - @(size -l a.out; size *.${SUF}) | pr -l84 -h SIZES - @${CXREF} sh*.c | pr -l84 -h XREF - @ls -l | pr -l84 - @${CXREF} sh*.c | pr -l84 -h XREF - @pr -l84 sh*.h [a-rt-z]*.h sh*.c alloc.c - -vgrind: - @cp /dev/null index - @for i in *.h; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @for i in *.c; do vgrind -t -h "C Shell" $$i >/crp/bill/csh/$$i.t; done - @vgrind -t -x -h Index index >/crp/bill/csh/index.t - -install: tcsh - -mv -f ${DESTBIN}/tcsh ${DESTBIN}/tcsh.old - cp tcsh ${DESTBIN}/tcsh - -strip ${DESTBIN}/tcsh - chmod 555 ${DESTBIN}/tcsh - -install.man: tcsh.man - -rm -f ${DESTMAN}/tcsh.${MANSECT} - cp tcsh.man ${DESTMAN}/tcsh.${MANSECT} - chmod 444 ${DESTMAN}/tcsh.${MANSECT} - -# Amiga Unix -#install.man: tcsh.man -# compress tcsh.man -# cp tcsh.man.Z ${DESTMAN}/tcsh.Z -# chmod 444 ${DESTMAN}/tcsh.Z - -# Apple A/UX -#install.man: tcsh.man -# -rm -f ${DESTMAN}/tcsh.${MANSECT}.Z -# nroff -man tcsh.man | compress > ${DESTMAN}/tcsh.${MANSECT}.Z -# chmod 444 ${DESTMAN}/tcsh.${MANSECT}.Z - -clean: - ${RM} -f a.out strings x.c xs.c tcsh tcsh.a _MAKE_LOG core gethost - ${RM} -f *.${SUF} sh.prof.c ed.defns.h tc.const.h sh.err.h tc.defs.c - ${RM} -f tcsh.*.m tcsh.*.cat - -veryclean: clean - ${RM} -f config.h - ${RM} -f *~ #* - -tags: /tmp - ${CTAGS} sh*.c - -tar.Z: - rm -f tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tar.gz: - rm -f tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | gzip > tcsh-${VERSION}.tar.gz - rm -rf tcsh-${VERSION} - -shar: - rm -f tcsh-*.shar - rm -rf tcsh-${VERSION} - mkdir tcsh-${VERSION} tcsh-${VERSION}/config - cp ${ALLSRCS} tcsh-${VERSION} - cp ${CONFSRCS} tcsh-${VERSION}/config - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - MAKESHAR -v -n tcsh-${VERSION} tcsh-${VERSION} \ - tcsh-${VERSION}/?* tcsh-${VERSION}/config/?* \ - tcsh-${VERSION}/?*/set?* - rm -rf tcsh-${VERSION} - -catalogs: - @(cd nls; make catalogs) - -tcsh-${VERSION}.tar.Z: - rm -rf tcsh-${VERSION} - rm -f tcsh-${VERSION}.tar tcsh-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh-${VERSION} - ./MAKEDIFFS bsd - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh-${VERSION} - cp ${DISTSRCS} tcsh-${VERSION} - mkdir tcsh-${VERSION}/config - cp ${CONFSRCS} tcsh-${VERSION}/config - cp Makefile tcsh-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh-${VERSION} | compress > tcsh-${VERSION}.tar.Z - rm -rf tcsh-${VERSION} - -tcsh.tahoe-${VERSION}.tar.Z: - rm -rf tcsh.tahoe-${VERSION} - rm -f tcsh.tahoe-${VERSION}.tar tcsh.tahoe-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh.tahoe-${VERSION} - ./MAKEDIFFS tahoe - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.tahoe-${VERSION} - cp ${DISTSRCS} tcsh.tahoe-${VERSION} - mkdir tcsh.tahoe-${VERSION}/config - cp ${CONFSRCS} tcsh.tahoe-${VERSION}/config - cp Makefile tcsh.tahoe-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.tahoe-${VERSION} | compress > tcsh.tahoe-${VERSION}.tar.Z - rm -rf tcsh.tahoe-${VERSION} - -tcsh.reno-${VERSION}.tar.Z: - rm -rf tcsh.reno-${VERSION} - rm -f tcsh.reno-${VERSION}.tar tcsh.reno-${VERSION}.tar.Z DIFFS.[123] - mkdir tcsh.reno-${VERSION} - ./MAKEDIFFS reno - mv DIFFS.1 DIFFS.2 DIFFS.3 tcsh.reno-${VERSION} - cp ${DISTSRCS} tcsh.reno-${VERSION} - mkdir tcsh.reno-${VERSION}/config - cp ${CONFSRCS} tcsh.reno-${VERSION}/config - cp Makefile tcsh.reno-${VERSION}/Makefile.new - tar cf - nls/Makefile nls/?*/set?* | (cd tcsh-${VERSION}; tar xpf -) - tar cvf - tcsh.reno-${VERSION} | compress > tcsh.reno-${VERSION}.tar.Z - rm -rf tcsh.reno-${VERSION} - -ftp: tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z - cp tcsh-${VERSION}.tar.Z tcsh.tahoe-${VERSION}.tar.Z ${FTPAREA} - cp tcsh.man ${FTPAREA} - -# -# Dependencies -# -config.h: config_f.h - -TCH=tc.h tc.const.h tc.decls.h tc.nls.h tc.os.h tc.sig.h -SHH=sh.h sh.types.h sh.char.h sh.err.h sh.dir.h sh.proc.h pathnames.h \ - sh.decls.h ${TCH} -TWH=tw.h tw.decls.h -EDH=ed.h ed.decls.h - -# EDH -EDINC=sh.${SUF} sh.func.${SUF} sh.lex.${SUF} sh.print.${SUF} sh.proc.${SUF} \ - sh.set.${SUF} tc.bind.${SUF} tc.os.${SUF} tc.prompt.${SUF} \ - tc.sched.${SUF} tw.parse.${SUF} -${EDOBJS} ${EDINC} : ${EDH} - -# SHH -${OBJS}: config.h ${SHH} - -# TWH -TWINC=ed.chared.${SUF} ed.inputl.${SUF} sh.exec.${SUF} sh.func.${SUF} \ - sh.set.${SUF} tc.func.${SUF} tc.nls.${SUF} -${TWOBJS} ${TWINC}: ${TWH} - -# glob.h -glob.${SUF} sh.glob.${SUF}: glob.h - -# ed.defns.h -EDDINC=tc.bind.${SUF} tc.func.${SUF} tc.os.${SUF} -${EDOBJS} ${EDDINC}: ed.defns.h - -# tc.defs.o -tc.defs.${SUF}: tc.defs.c sh.h diff --git a/contrib/tcsh/config.guess b/contrib/tcsh/config.guess deleted file mode 100755 index f7eb141e75a9..000000000000 --- a/contrib/tcsh/config.guess +++ /dev/null @@ -1,1438 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2015 Free Software Foundation, Inc. - -timestamp='2015-03-04' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2015 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "${UNAME_SYSTEM}" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - eval $set_cc_for_build - cat <<-EOF > $dummy.c - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - /sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || \ - echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` - machine=${arch}${endian}-unknown - ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|earm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "${UNAME_MACHINE_ARCH}" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}${abi}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW64*:*) - echo ${UNAME_MACHINE}-pc-mingw64 - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - *:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - aarch64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi - else - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - cris:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - crisv32:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - e2k:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } - ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-${LIBC} - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-${LIBC} - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-${LIBC} - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-${LIBC} - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux-${LIBC} - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-${LIBC} - exit ;; - x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval $set_cc_for_build - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-?:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo ${UNAME_MACHINE}-unknown-esx - exit ;; -esac - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/contrib/tcsh/config.h.in b/contrib/tcsh/config.h.in deleted file mode 100644 index 60ce2ea9c815..000000000000 --- a/contrib/tcsh/config.h.in +++ /dev/null @@ -1,275 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to the type of elements in the array set by `getgroups'. Usually - this is either `int' or `gid_t'. */ -#undef GETGROUPS_T - -/* Define to 1 if the `getpgrp' function requires zero arguments. */ -#undef GETPGRP_VOID - -/* Define to 1 if you have the header file. */ -#undef HAVE_AUTH_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_CRYPT_H - -/* Define to 1 if you have the declaration of `crypt', and to 0 if you don't. - */ -#undef HAVE_DECL_CRYPT - -/* Define to 1 if you have the declaration of `environ', and to 0 if you - don't. */ -#undef HAVE_DECL_ENVIRON - -/* Define to 1 if you have the declaration of `gethostname', and to 0 if you - don't. */ -#undef HAVE_DECL_GETHOSTNAME - -/* Define to 1 if you have the declaration of `getpgrp', and to 0 if you - don't. */ -#undef HAVE_DECL_GETPGRP - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_DIRENT_H - -/* Define to 1 if you have the `dup2' function. */ -#undef HAVE_DUP2 - -/* Define to 1 if you have the header file. */ -#undef HAVE_FEATURES_H - -/* Define to 1 if you have the `getauthid' function. */ -#undef HAVE_GETAUTHID - -/* Define to 1 if you have the `getcwd' function. */ -#undef HAVE_GETCWD - -/* Define to 1 if you have the `gethostname' function. */ -#undef HAVE_GETHOSTNAME - -/* Define to 1 if you have the `getpwent' function. */ -#undef HAVE_GETPWENT - -/* Define to 1 if you have the `getutent' function. */ -#undef HAVE_GETUTENT - -/* Define to 1 if you have the `getutxent' function. */ -#undef HAVE_GETUTXENT - -/* Define if you have the iconv() function and it works. */ -#undef HAVE_ICONV - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if the system has the type `long long'. */ -#undef HAVE_LONG_LONG - -/* Define to 1 if you have the `mallinfo' function. */ -#undef HAVE_MALLINFO - -/* Define to 1 if you have the `mblen' function. */ -#undef HAVE_MBLEN - -/* Define to 1 if mbrtowc and mbstate_t are properly declared. */ -#undef HAVE_MBRTOWC - -/* Define to 1 if you have the `memmove' function. */ -#undef HAVE_MEMMOVE - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `memset' function. */ -#undef HAVE_MEMSET - -/* Define to 1 if you have the `mkstemp' function. */ -#undef HAVE_MKSTEMP - -/* Define to 1 if you have the header file, and it defines `DIR'. */ -#undef HAVE_NDIR_H - -/* Define to 1 if you have the `nice' function. */ -#undef HAVE_NICE - -/* Define to 1 if you have the `nl_langinfo' function. */ -#undef HAVE_NL_LANGINFO - -/* Define to 1 if you have the header file. */ -#undef HAVE_PATHS_H - -/* Define to 1 if you have the `sbrk' function. */ -#undef HAVE_SBRK - -/* Define to 1 if you have the `setpgid' function. */ -#undef HAVE_SETPGID - -/* Define to 1 if you have the `setpriority' function. */ -#undef HAVE_SETPRIORITY - -/* Define to 1 if you have the header file. */ -#undef HAVE_SHADOW_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the `strcoll' function and it is properly defined. - */ -#undef HAVE_STRCOLL - -/* Define to 1 if you have the `strerror' function. */ -#undef HAVE_STRERROR - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strstr' function. */ -#undef HAVE_STRSTR - -/* Define to 1 if `d_ino' is a member of `struct dirent'. */ -#undef HAVE_STRUCT_DIRENT_D_INO - -/* Define to 1 if `ss_family' is a member of `struct sockaddr_storage'. */ -#undef HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY - -/* Define to 1 if `ut_host' is a member of `struct utmpx'. */ -#undef HAVE_STRUCT_UTMPX_UT_HOST - -/* Define to 1 if `ut_tv' is a member of `struct utmpx'. */ -#undef HAVE_STRUCT_UTMPX_UT_TV - -/* Define to 1 if `ut_user' is a member of `struct utmpx'. */ -#undef HAVE_STRUCT_UTMPX_UT_USER - -/* Define to 1 if `ut_xtime' is a member of `struct utmpx'. */ -#undef HAVE_STRUCT_UTMPX_UT_XTIME - -/* Define to 1 if `ut_host' is a member of `struct utmp'. */ -#undef HAVE_STRUCT_UTMP_UT_HOST - -/* Define to 1 if `ut_tv' is a member of `struct utmp'. */ -#undef HAVE_STRUCT_UTMP_UT_TV - -/* Define to 1 if `ut_user' is a member of `struct utmp'. */ -#undef HAVE_STRUCT_UTMP_UT_USER - -/* Define to 1 if `ut_xtime' is a member of `struct utmp'. */ -#undef HAVE_STRUCT_UTMP_UT_XTIME - -/* Define to 1 if you have the `sysconf' function. */ -#undef HAVE_SYSCONF - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_DIR_H - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_NDIR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTMPX_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTMP_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_WCHAR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_WCTYPE_H - -/* Define to 1 if you have the `wcwidth' function. */ -#undef HAVE_WCWIDTH - -/* Define as const if the declaration of iconv() needs const. */ -#undef ICONV_CONST - -/* Support NLS. */ -#undef NLS - -/* Support NLS catalogs. */ -#undef NLS_CATALOGS - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if the `setpgrp' function takes no argument. */ -#undef SETPGRP_VOID - -/* The size of `wchar_t', as computed by sizeof. */ -#undef SIZEOF_WCHAR_T - -/* Define to 1 if the `S_IS*' macros in do not work properly. */ -#undef STAT_MACROS_BROKEN - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define for Solaris 2.5.1 so the uint32_t typedef from , - , or is not used. If the typedef were allowed, the - #define below would cause a syntax error. */ -#undef _UINT32_T - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to `int' if doesn't define. */ -#undef gid_t - -/* Define to `int' if does not define. */ -#undef mode_t - -/* Define to `unsigned int' if does not define. */ -#undef size_t - -/* Define to `int' if neither nor define. */ -#undef socklen_t - -/* Define to `int' not defined in . */ -#undef ssize_t - -/* Define to `int' if doesn't define. */ -#undef uid_t - -/* Define to the type of an unsigned integer type of width exactly 32 bits if - such a type exists and the standard includes do not define it. */ -#undef uint32_t - -/* Define to empty if the keyword `volatile' does not work. Warning: valid - code using `volatile' can become incorrect without. Disable with care. */ -#undef volatile - -#include "config_p.h" -#include "config_f.h" diff --git a/contrib/tcsh/config.rpath b/contrib/tcsh/config.rpath deleted file mode 100644 index 3f1bef34a0f0..000000000000 --- a/contrib/tcsh/config.rpath +++ /dev/null @@ -1,571 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2005 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -cc_basename=`echo "$CC" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - darwin*) - case "$cc_basename" in - xlc*) - wl='-Wl,' - ;; - esac - ;; - mingw* | pw32* | os2*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - newsos6) - ;; - linux*) - case $cc_basename in - icc* | ecc*) - wl='-Wl,' - ;; - pgcc | pgf77 | pgf90) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - esac - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - sco3.2v5*) - ;; - solaris*) - wl='-Wl,' - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - case "$host_os" in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we cannot use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sunos4*) - hardcode_direct=yes - ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = yes; then - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if test "$GCC" = yes ; then - : - else - case "$cc_basename" in - xlc*) - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd1*) - ld_shlibs=no - ;; - freebsd2.2*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - freebsd2*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10* | hpux11*) - if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=no - ;; - ia64*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - *) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - openbsd*) - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - sco3.2v5*) - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4.2uw2*) - hardcode_direct=yes - hardcode_minus_L=no - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - ;; - sysv5*) - hardcode_libdir_flag_spec= - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. -libname_spec='lib$name' -case "$host_os" in - aix3*) - ;; - aix4* | aix5*) - ;; - amigaos*) - ;; - beos*) - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32*) - shrext=.dll - ;; - darwin* | rhapsody*) - shrext=.dylib - ;; - dgux*) - ;; - freebsd1*) - ;; - kfreebsd*-gnu) - ;; - freebsd*) - ;; - gnu*) - ;; - hpux9* | hpux10* | hpux11*) - case "$host_cpu" in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux*) - ;; - knetbsd*-gnu) - ;; - netbsd*) - ;; - newsos6) - ;; - nto-qnx*) - ;; - openbsd*) - ;; - os2*) - libname_spec='$name' - shrext=.dll - ;; - osf3* | osf4* | osf5*) - ;; - sco3.2v5*) - ;; - solaris*) - ;; - sunos4*) - ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - ;; - sysv4*MP*) - ;; - uts4*) - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches with a ChangeLog entry to config-patches@gnu.org. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2013 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*178) - os=-lynxos178 - ;; - -lynx*5) - os=-lynxos5 - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arceb \ - | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ - | avr | avr32 \ - | be32 | be64 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipsr5900 | mipsr5900el \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 | nios2eb | nios2el \ - | ns16k | ns32k \ - | open8 \ - | or1k | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pyramid \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | we32k \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipsr5900-* | mipsr5900el-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* | nios2eb-* | nios2el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pyramid-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze*) - basic_machine=microblaze-xilinx - ;; - mingw64) - basic_machine=x86_64-pc - os=-mingw64 - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i386-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=-rdos - ;; - rdos32) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* | -plan9* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -nacl*) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - hexagon-*) - os=-elf - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or1k-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/contrib/tcsh/configure b/contrib/tcsh/configure deleted file mode 100755 index 27a6bec356a0..000000000000 --- a/contrib/tcsh/configure +++ /dev/null @@ -1,8842 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for tcsh 6.22.03. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: https://bugs.astron.com/ about your system, including -$0: any error possibly output before this message. Then -$0: install a modern shell, or manually run the script -$0: under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='tcsh' -PACKAGE_TARNAME='tcsh' -PACKAGE_VERSION='6.22.03' -PACKAGE_STRING='tcsh 6.22.03' -PACKAGE_BUGREPORT='https://bugs.astron.com/' -PACKAGE_URL='' - -ac_unique_file="tc.vers.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='LTLIBOBJS -LIBOBJS -BUILD_CATALOGS -HESLIB -HESDEF -DFLAGS -CC_FOR_GETHOST -GENCAT -LTLIBICONV -LIBICONV -EGREP -GREP -CPP -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -with_gnu_ld -enable_rpath -with_libiconv_prefix -enable_nls -enable_nls_catalogs -with_hesiod -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures tcsh 6.22.03 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/tcsh] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of tcsh 6.22.03:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-rpath do not hardcode runtime library paths - --disable-nls Disable NLS support - --disable-nls-catalogs Disable NLS catalog support - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-hesiod=PREFIX Use Hesiod lookup for ~ expansion - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -tcsh configure 6.22.03 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## --------------------------------------- ## -## Report this to https://bugs.astron.com/ ## -## --------------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES -# -------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_c_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid; break -else - as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=$ac_mid; break -else - as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - ac_lo= ac_hi= -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid -else - as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval () { return $2; } -static unsigned long int ulongval () { return $2; } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo >>conftest.val; read $3 &5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_find_uintX_t LINENO BITS VAR -# ------------------------------------ -# Finds an unsigned integer type with width BITS, setting cache variable VAR -# accordingly. -ac_fn_c_find_uintX_t () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 -$as_echo_n "checking for uint$2_t... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - # Order is important - never check a type that is potentially smaller - # than half of the expected target width. - for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - case $ac_type in #( - uint$2_t) : - eval "$3=yes" ;; #( - *) : - eval "$3=\$ac_type" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if eval test \"x\$"$3"\" = x"no"; then : - -else - break -fi - done -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_find_uintX_t - -# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES -# ---------------------------------------------------- -# Tries to find if the field MEMBER exists in type AGGR, after including -# INCLUDES, setting cache variable VAR accordingly. -ac_fn_c_check_member () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 -$as_echo_n "checking for $2.$3... " >&6; } -if eval \${$4+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main () -{ -static $2 ac_aggr; -if (ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$4=yes" -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main () -{ -static $2 ac_aggr; -if (sizeof ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$4=yes" -else - eval "$4=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$4 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_member - -# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES -# --------------------------------------------- -# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR -# accordingly. -ac_fn_c_check_decl () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - as_decl_name=`echo $2|sed 's/ *(.*//'` - as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 -$as_echo_n "checking whether $as_decl_name is declared... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -#ifndef $as_decl_name -#ifdef __cplusplus - (void) $as_decl_use; -#else - (void) $as_decl_name; -#endif -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_decl - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by tcsh $as_me 6.22.03, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -ac_config_headers="$ac_config_headers config.h" - -ac_config_commands="$ac_config_commands ./atconfig" - - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` - while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${acl_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${acl_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 -$as_echo_n "checking for shared library run path origin... " >&6; } -if ${acl_cv_rpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 -$as_echo "$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then : - enableval=$enable_rpath; : -else - enable_rpath=yes -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - - - - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 -$as_echo_n "checking for 64-bit host... " >&6; } -if ${gl_cv_solaris_64bit+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef _LP64 -sixtyfour bits -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "sixtyfour bits" >/dev/null 2>&1; then : - gl_cv_solaris_64bit=yes -else - gl_cv_solaris_64bit=no -fi -rm -f conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 -$as_echo "$gl_cv_solaris_64bit" >&6; } - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test "${with_libiconv_prefix+set}" = set; then : - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - HAVE_LIBICONV= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - - - - - - am_save_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 -$as_echo_n "checking for iconv... " >&6; } -if ${am_cv_func_iconv+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$am_save_LIBS" - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 -$as_echo "$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 -$as_echo_n "checking for working iconv... " >&6; } -if ${am_cv_func_iconv_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - if test "$cross_compiling" = yes; then : - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - -int -main () -{ -int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - result |= 16; - return result; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - am_cv_func_iconv_works=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 -$as_echo "$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -$as_echo "#define HAVE_ICONV 1" >>confdefs.h - - fi - if test "$am_cv_lib_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 -$as_echo_n "checking how to link with libiconv... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 -$as_echo "$LIBICONV" >&6; } - else - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - if test "$am_cv_func_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5 -$as_echo_n "checking for iconv declaration... " >&6; } - if ${am_cv_proto_iconv+:} false; then : - $as_echo_n "(cached) " >&6 -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - am_cv_proto_iconv_arg1="" -else - am_cv_proto_iconv_arg1="const" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" -fi - - am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - { $as_echo "$as_me:${as_lineno-$LINENO}: result: - $am_cv_proto_iconv" >&5 -$as_echo " - $am_cv_proto_iconv" >&6; } - -cat >>confdefs.h <<_ACEOF -#define ICONV_CONST $am_cv_proto_iconv_arg1 -_ACEOF - - - fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking cached host tuple" >&5 -$as_echo_n "checking cached host tuple... " >&6; } -if { test x"${ac_cv_host_system_type+set}" = x"set" && - test x"$ac_cv_host_system_type" != x"$host"; }; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: different" >&5 -$as_echo "different" >&6; } - as_fn_error $? "remove config.cache and re-run configure" "$LINENO" 5 -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi -ac_cv_host_system_type="$host" - - - -case "${host}" in - - ## Alpha (DEC) machines. - alpha*-dec-osf* ) - tcsh_config_file=decosf1 - ;; - - ## Ultrix - *-dec-ultrix* ) - tcsh_config_file=ultrix - ;; - - ## DGUX - *-dg-dguxR4* ) - tcsh_config_file=dgux5.4 - ;; - m88k-dg-dgux5.4R* ) - tcsh_config_file=dgux5.4 - ;; - - ## HP/UX - *-hp-hpux7* ) - tcsh_config_file=hpux7 - ;; - *-hp-hpux[89]* ) - tcsh_config_file=hpux8 - ;; - *-hp-hpux1[0-9]* ) - tcsh_config_file=hpux11 - ;; - - ## IBM AIX systems - *-ibm-aix*) - tcsh_config_file=aix - ;; - - ## SX-4 - sx4-nec-*) - CC='cc -h0,ansi,novector,float0' - LDFLAGS='-Gsmall' - tcsh_config_file=superux8 - ;; - - ## IBM OS/390 systems - *-ibm-os390*) - CC='c89' - tcsh_config_file=os390 - ;; - - ## Android - *-*-android*) - tcsh_config_file=android - ;; - - ## Linux - *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) - tcsh_config_file=linux - ;; - - ## Motorola systems - m68k-motorola-sysv* ) - tcsh_config_file=sysV68 - ;; - m88k-motorola-sysv3* ) - tcsh_config_file=sysV88 - ;; - - ## Minix systems - *-*-minix*) - tcsh_config_file=minix - ;; - - ## NetBSD systems - *-*-netbsd*) - tcsh_config_file=bsd4.4 - ;; - - ## FreeBSD systems - *-*-freebsd*) - tcsh_config_file=bsd4.4 - ;; - - ## MidnightBSD systems - *-*-midnightbsd*) - tcsh_config_file=bsd4.4 - ;; - - ## DragonFlyBSD systems - *-*-dragonfly*) - tcsh_config_file=bsd4.4 - ;; - - ## MirBSD systems - *-*-mirbsd*) - tcsh_config_file=bsd4.4 - ;; - - ## OpenBSD systems - *-*-openbsd*) - tcsh_config_file=bsd4.4 - ;; - - ## BSDI systems - *-*-bsdi*) - tcsh_config_file=bsd4.4 - ;; - - ## Mac OS X Server - *-*-rhapsody* ) - tcsh_config_file=bsd4.4 - ;; - - ## Mac OS X Server - *-*-darwin* ) - tcsh_config_file=bsd4.4 - ;; - - ## DragonFly systems - *-*-dragonfly*) - tcsh_config_file=bsd4.4 - ;; - - ## Silicon Graphics machines - *-sgi-iri* ) - tcsh_config_file=irix - case "${host_os}" in - irix[34]*) # Irix-3.x - Irix 4.x - NON_GNU_DFLAGS='-D__STDC__' - LIBS='-lsun -lbsd -lc_s' - ;; - irix5* | irix6.[01]*) # Irix 5.x, Irix 6.0 - 6.1 - LIBS='-lbsd' - ;; - irix6.[2-9]*) # Irix 6.2 and later - tcsh_config_file=irix62 - ;; - esac - ;; - - ## Suns - *-sun-sunos3* ) - tcsh_config_file=sunos35 - ;; - *-sun-sunos4.0* ) - tcsh_config_file=sunos40 - ;; - *-sun-sunos4.1.[12]* ) - tcsh_config_file=sunos41 - ;; - *-sun-sunos4.1.[3456]* ) - tcsh_config_file=sunos413 - ;; - *-*-solaris2.[01] ) # Should handle sparc or x86 - tcsh_config_file=sol2 - ;; - *-sun-solaris2.2 ) # Sparc only release - tcsh_config_file=sol22 - ;; - *-sun-solaris2.3 ) # Sparc only release - tcsh_config_file=sol23 - ;; - *-*-solaris2.[45] ) # Should handle sparc, x86 and powerpc - tcsh_config_file=sol24 - ;; - *-*-solaris2.[678] ) # Should handle sparc, x86 and powerpc - tcsh_config_file=sol26 - ;; - *-*-solaris2.* ) # Should handle sparc, x86 and powerpc - tcsh_config_file=sol29 - ;; - - ## Dell SVR4 - *-dell-sysv4* ) - tcsh_config_file=sysv4 - DFLAGS="$DFLAGS -DDELL" - ;; - - ## SVR4 (Generic and otherwise) - *-*-sysv4* ) - tcsh_config_file=sysv4 - ;; - - ## Tektronix systems - m68k-tektronix-bsd* ) - tcsh_config_file=bsd - NON_GNU_DFLAGS='-DBSD -DUTek' - ;; - m88k-tektronix-sysv3* ) - tcsh_config_file=tekXD88 - ;; - - ## SCO - *-sco3.2v5*) - tcsh_config_file=sco32v5 - ;; - *-sco3.2v4*) - tcsh_config_file=sco32v4 - ;; - *-sco3.2v2*) - tcsh_config_file=sco32v2 - ;; - - ## Siemens BS2000 Mainframe - bs2000-siemens-*) - tcsh_config_file=bs2000 - ;; - - ## Convex - *-convex*) - tcsh_config_file=convex - ;; - - ## Cray - *-cray-unicos*) - tcsh_config_file=cray - ;; - - ## Red Hat Cygwin - *-cygwin) - tcsh_config_file=cygwin - ;; - - ## mips-compaq-nonstopux - *-*-nonstopux) - tcsh_config_file=sysv4 - ;; - - ## Apollo Domain/OS - *-apollo-*) - tcsh_config_file=apollo - ;; - - ## QNX6 - *-qnx6*) - tcsh_config_file=qnx6 - ;; - - * ) - as_fn_error $? "Tcsh can't guess the configuration file name -for \`${host}' systems. -Check tcsh's \`Ported' file for manual configuration instructions." "$LINENO" 5 - ;; - -esac - -echo "Tcsh will use configuration file \`$tcsh_config_file'." -cp ${srcdir}/config/${tcsh_config_file} config_p.h - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test $ac_cv_c_compiler_gnu = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 -$as_echo_n "checking whether $CC needs -traditional... " >&6; } -if ${ac_cv_prog_gcc_traditional+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_pattern="Autoconf.*'x'" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TIOCGETP -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -else - ac_cv_prog_gcc_traditional=no -fi -rm -f conftest* - - - if test $ac_cv_prog_gcc_traditional = no; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TCGETA -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -fi -rm -f conftest* - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 -$as_echo "$ac_cv_prog_gcc_traditional" >&6; } - if test $ac_cv_prog_gcc_traditional = yes; then - CC="$CC -traditional" - fi -fi - - -# Extract the first word of "gencat", so it can be a program name with args. -set dummy gencat; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GENCAT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GENCAT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GENCAT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GENCAT=$ac_cv_path_GENCAT -if test -n "$GENCAT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GENCAT" >&5 -$as_echo "$GENCAT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -if test "x${cross_compiling}" = xyes ; then - CC_FOR_GETHOST="cc" -else - CC_FOR_GETHOST="\$(CC)" -fi - - -if test "x$GCC" != xyes ; then - DFLAGS="$DFLAGS $NON_GNU_DFLAGS" - CFLAGS="$CFLAGS $NON_GNU_CFLAGS" -fi - -case "${host}" in - *-*-android*) - CFLAGS="${CFLAGS} -fPIE" - LDFLAGS="${LDFLAGS} -pie" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing crypt" >&5 -$as_echo_n "checking for library containing crypt... " >&6; } -if ${ac_cv_search_crypt+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char crypt (); -int -main () -{ -return crypt (); - ; - return 0; -} -_ACEOF -for ac_lib in '' crypt; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_crypt=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_crypt+:} false; then : - break -fi -done -if ${ac_cv_search_crypt+:} false; then : - -else - ac_cv_search_crypt=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_crypt" >&5 -$as_echo "$ac_cv_search_crypt" >&6; } -ac_res=$ac_cv_search_crypt -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getspnam" >&5 -$as_echo_n "checking for library containing getspnam... " >&6; } -if ${ac_cv_search_getspnam+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char getspnam (); -int -main () -{ -return getspnam (); - ; - return 0; -} -_ACEOF -for ac_lib in '' sec; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_getspnam=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_getspnam+:} false; then : - break -fi -done -if ${ac_cv_search_getspnam+:} false; then : - -else - ac_cv_search_getspnam=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getspnam" >&5 -$as_echo "$ac_cv_search_getspnam" >&6; } -ac_res=$ac_cv_search_getspnam -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing tgetent" >&5 -$as_echo_n "checking for library containing tgetent... " >&6; } -if ${ac_cv_search_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -for ac_lib in '' termlib tinfo termcap curses ncurses; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_tgetent=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_tgetent+:} false; then : - break -fi -done -if ${ac_cv_search_tgetent+:} false; then : - -else - ac_cv_search_tgetent=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_tgetent" >&5 -$as_echo "$ac_cv_search_tgetent" >&6; } -ac_res=$ac_cv_search_tgetent -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -else - - as_fn_error $? "unable to find the tgetent() function" "$LINENO" 5 - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5 -$as_echo_n "checking for library containing gethostbyname... " >&6; } -if ${ac_cv_search_gethostbyname+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char gethostbyname (); -int -main () -{ -return gethostbyname (); - ; - return 0; -} -_ACEOF -for ac_lib in '' nsl; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_gethostbyname=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_gethostbyname+:} false; then : - break -fi -done -if ${ac_cv_search_gethostbyname+:} false; then : - -else - ac_cv_search_gethostbyname=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5 -$as_echo "$ac_cv_search_gethostbyname" >&6; } -ac_res=$ac_cv_search_gethostbyname -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing connect" >&5 -$as_echo_n "checking for library containing connect... " >&6; } -if ${ac_cv_search_connect+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char connect (); -int -main () -{ -return connect (); - ; - return 0; -} -_ACEOF -for ac_lib in '' socket; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_connect=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_connect+:} false; then : - break -fi -done -if ${ac_cv_search_connect+:} false; then : - -else - ac_cv_search_connect=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_connect" >&5 -$as_echo "$ac_cv_search_connect" >&6; } -ac_res=$ac_cv_search_connect -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing catgets" >&5 -$as_echo_n "checking for library containing catgets... " >&6; } -if ${ac_cv_search_catgets+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char catgets (); -int -main () -{ -return catgets (); - ; - return 0; -} -_ACEOF -for ac_lib in '' catgets; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_catgets=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_catgets+:} false; then : - break -fi -done -if ${ac_cv_search_catgets+:} false; then : - -else - ac_cv_search_catgets=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_catgets" >&5 -$as_echo "$ac_cv_search_catgets" >&6; } -ac_res=$ac_cv_search_catgets -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in auth.h crypt.h features.h inttypes.h paths.h shadow.h stdint.h utmp.h utmpx.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -for ac_header in wchar.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "wchar.h" "ac_cv_header_wchar_h" "$ac_includes_default" -if test "x$ac_cv_header_wchar_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_WCHAR_H 1 -_ACEOF - # The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of wchar_t" >&5 -$as_echo_n "checking size of wchar_t... " >&6; } -if ${ac_cv_sizeof_wchar_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (wchar_t))" "ac_cv_sizeof_wchar_t" "#include -#include -"; then : - -else - if test "$ac_cv_type_wchar_t" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (wchar_t) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_wchar_t=0 - fi -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_wchar_t" >&5 -$as_echo "$ac_cv_sizeof_wchar_t" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_WCHAR_T $ac_cv_sizeof_wchar_t -_ACEOF - - - for ac_header in wctype.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "wctype.h" "ac_cv_header_wctype_h" "$ac_includes_default" -if test "x$ac_cv_header_wctype_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_WCTYPE_H 1 -_ACEOF - -fi - -done - -fi - -done - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do - as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 -$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } -if eval \${$as_ac_Header+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include <$ac_hdr> - -int -main () -{ -if ((DIR *) 0) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_ac_Header=yes" -else - eval "$as_ac_Header=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$as_ac_Header - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -_ACEOF - -ac_header_dirent=$ac_hdr; break -fi - -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' dir; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' x; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 -$as_echo_n "checking whether stat file-mode macros are broken... " >&6; } -if ${ac_cv_header_stat_broken+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include - -#if defined S_ISBLK && defined S_IFDIR -extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; -#endif - -#if defined S_ISBLK && defined S_IFCHR -extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; -#endif - -#if defined S_ISLNK && defined S_IFREG -extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; -#endif - -#if defined S_ISSOCK && defined S_IFREG -extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; -#endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stat_broken=no -else - ac_cv_header_stat_broken=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 -$as_echo "$ac_cv_header_stat_broken" >&6; } -if test $ac_cv_header_stat_broken = yes; then - -$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - - -ac_fn_c_check_type "$LINENO" "long long" "ac_cv_type_long_long" "$ac_includes_default" -if test "x$ac_cv_type_long_long" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_LONG_LONG 1 -_ACEOF - - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 -$as_echo_n "checking for uid_t in sys/types.h... " >&6; } -if ${ac_cv_type_uid_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "uid_t" >/dev/null 2>&1; then : - ac_cv_type_uid_t=yes -else - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 -$as_echo "$ac_cv_type_uid_t" >&6; } -if test $ac_cv_type_uid_t = no; then - -$as_echo "#define uid_t int" >>confdefs.h - - -$as_echo "#define gid_t int" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking type of array argument to getgroups" >&5 -$as_echo_n "checking type of array argument to getgroups... " >&6; } -if ${ac_cv_type_getgroups+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_type_getgroups=cross -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Thanks to Mike Rendell for this test. */ -$ac_includes_default -#define NGID 256 -#undef MAX -#define MAX(x, y) ((x) > (y) ? (x) : (y)) - -int -main () -{ - gid_t gidset[NGID]; - int i, n; - union { gid_t gval; long int lval; } val; - - val.lval = -1; - for (i = 0; i < NGID; i++) - gidset[i] = val.gval; - n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1, - gidset); - /* Exit non-zero if getgroups seems to require an array of ints. This - happens when gid_t is short int but getgroups modifies an array - of ints. */ - return n > 0 && gidset[n] != val.gval; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_type_getgroups=gid_t -else - ac_cv_type_getgroups=int -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -if test $ac_cv_type_getgroups = cross; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then : - ac_cv_type_getgroups=gid_t -else - ac_cv_type_getgroups=int -fi -rm -f conftest* - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_getgroups" >&5 -$as_echo "$ac_cv_type_getgroups" >&6; } - -cat >>confdefs.h <<_ACEOF -#define GETGROUPS_T $ac_cv_type_getgroups -_ACEOF - - -ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default" -if test "x$ac_cv_type_mode_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define mode_t int -_ACEOF - -fi - -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 -$as_echo_n "checking for uid_t in sys/types.h... " >&6; } -if ${ac_cv_type_uid_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "uid_t" >/dev/null 2>&1; then : - ac_cv_type_uid_t=yes -else - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 -$as_echo "$ac_cv_type_uid_t" >&6; } -if test $ac_cv_type_uid_t = no; then - -$as_echo "#define uid_t int" >>confdefs.h - - -$as_echo "#define gid_t int" >>confdefs.h - -fi - -ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" -case $ac_cv_c_uint32_t in #( - no|yes) ;; #( - *) - -$as_echo "#define _UINT32_T 1" >>confdefs.h - - -cat >>confdefs.h <<_ACEOF -#define uint32_t $ac_cv_c_uint32_t -_ACEOF -;; - esac - - - - -ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" " -#include - -" -if test "x$ac_cv_type_ssize_t" = xyes; then : - -else - -$as_echo "#define ssize_t int" >>confdefs.h - -fi - - - - - -ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" " -#include -#include - -" -if test "x$ac_cv_type_socklen_t" = xyes; then : - -else - -$as_echo "#define socklen_t int" >>confdefs.h - -fi - - - - -ac_fn_c_check_member "$LINENO" "struct dirent" "d_ino" "ac_cv_member_struct_dirent_d_ino" "#ifdef HAVE_DIRENT_H -# include -#else -# ifdef HAVE_NDIR_H -# include -# else -# include -# endif -# define dirent direct -#endif -" -if test "x$ac_cv_member_struct_dirent_d_ino" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_DIRENT_D_INO 1 -_ACEOF - - -fi - -ac_fn_c_check_member "$LINENO" "struct utmp" "ut_host" "ac_cv_member_struct_utmp_ut_host" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmp_ut_host" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMP_UT_HOST 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmp" "ut_user" "ac_cv_member_struct_utmp_ut_user" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmp_ut_user" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMP_UT_USER 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmp" "ut_tv" "ac_cv_member_struct_utmp_ut_tv" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmp_ut_tv" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMP_UT_TV 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmp" "ut_xtime" "ac_cv_member_struct_utmp_ut_xtime" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmp_ut_xtime" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMP_UT_XTIME 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmpx" "ut_host" "ac_cv_member_struct_utmpx_ut_host" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmpx_ut_host" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMPX_UT_HOST 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmpx" "ut_user" "ac_cv_member_struct_utmpx_ut_user" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmpx_ut_user" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMPX_UT_USER 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmpx" "ut_tv" "ac_cv_member_struct_utmpx_ut_tv" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmpx_ut_tv" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMPX_UT_TV 1 -_ACEOF - - -fi -ac_fn_c_check_member "$LINENO" "struct utmpx" "ut_xtime" "ac_cv_member_struct_utmpx_ut_xtime" "#include -#ifdef HAVE_UTMPX_H -#include -#define utmp utmpx -#elif defined HAVE_UTMP_H -#include -#endif -" -if test "x$ac_cv_member_struct_utmpx_ut_xtime" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_UTMPX_UT_XTIME 1 -_ACEOF - - -fi - -ac_fn_c_check_member "$LINENO" "struct sockaddr_storage" "ss_family" "ac_cv_member_struct_sockaddr_storage_ss_family" "#include -#include -" -if test "x$ac_cv_member_struct_sockaddr_storage_ss_family" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY 1 -_ACEOF - - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifndef __cplusplus - /* Ultrix mips cc rejects this sort of thing. */ - typedef int charset[2]; - const charset cs = { 0, 0 }; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this sort of thing. */ - char tx; - char *t = &tx; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; } bx; - struct s *b = &bx; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5 -$as_echo_n "checking for working volatile... " >&6; } -if ${ac_cv_c_volatile+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -volatile int x; -int * volatile y = (int *) 0; -return !x && !y; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_volatile=yes -else - ac_cv_c_volatile=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5 -$as_echo "$ac_cv_c_volatile" >&6; } -if test $ac_cv_c_volatile = no; then - -$as_echo "#define volatile /**/" >>confdefs.h - -fi - - -ac_fn_c_check_decl "$LINENO" "crypt" "ac_cv_have_decl_crypt" "#include \"config_p.h\" -$ac_includes_default -#ifdef HAVE_CRYPT_H -#include -#endif - -" -if test "x$ac_cv_have_decl_crypt" = xyes; then : - ac_have_decl=1 -else - ac_have_decl=0 -fi - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_CRYPT $ac_have_decl -_ACEOF -ac_fn_c_check_decl "$LINENO" "environ" "ac_cv_have_decl_environ" "#include \"config_p.h\" -$ac_includes_default -#ifdef HAVE_CRYPT_H -#include -#endif - -" -if test "x$ac_cv_have_decl_environ" = xyes; then : - ac_have_decl=1 -else - ac_have_decl=0 -fi - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_ENVIRON $ac_have_decl -_ACEOF -ac_fn_c_check_decl "$LINENO" "gethostname" "ac_cv_have_decl_gethostname" "#include \"config_p.h\" -$ac_includes_default -#ifdef HAVE_CRYPT_H -#include -#endif - -" -if test "x$ac_cv_have_decl_gethostname" = xyes; then : - ac_have_decl=1 -else - ac_have_decl=0 -fi - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_GETHOSTNAME $ac_have_decl -_ACEOF -ac_fn_c_check_decl "$LINENO" "getpgrp" "ac_cv_have_decl_getpgrp" "#include \"config_p.h\" -$ac_includes_default -#ifdef HAVE_CRYPT_H -#include -#endif - -" -if test "x$ac_cv_have_decl_getpgrp" = xyes; then : - ac_have_decl=1 -else - ac_have_decl=0 -fi - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_GETPGRP $ac_have_decl -_ACEOF - -ac_fn_c_check_func "$LINENO" "setlocale" "ac_cv_func_setlocale" -if test "x$ac_cv_func_setlocale" = xyes; then : - have_setlocale=yes -else - have_setlocale=no -fi - -ac_fn_c_check_func "$LINENO" "catgets" "ac_cv_func_catgets" -if test "x$ac_cv_func_catgets" = xyes; then : - have_catgets=yes -else - have_catgets=no -fi - -for ac_func in dup2 getauthid getcwd gethostname getpwent getutent getutxent mallinfo mblen memmove memset mkstemp nice nl_langinfo sbrk setpgid setpriority strerror strstr sysconf wcwidth -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpgrp requires zero arguments" >&5 -$as_echo_n "checking whether getpgrp requires zero arguments... " >&6; } -if ${ac_cv_func_getpgrp_void+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Use it with a single arg. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -getpgrp (0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_func_getpgrp_void=no -else - ac_cv_func_getpgrp_void=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_getpgrp_void" >&5 -$as_echo "$ac_cv_func_getpgrp_void" >&6; } -if test $ac_cv_func_getpgrp_void = yes; then - -$as_echo "#define GETPGRP_VOID 1" >>confdefs.h - -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5 -$as_echo_n "checking whether mbrtowc and mbstate_t are properly declared... " >&6; } -if ${ac_cv_func_mbrtowc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -wchar_t wc; - char const s[] = ""; - size_t n = 1; - mbstate_t state; - return ! (sizeof state && (mbrtowc) (&wc, s, n, &state)); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_func_mbrtowc=yes -else - ac_cv_func_mbrtowc=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5 -$as_echo "$ac_cv_func_mbrtowc" >&6; } - if test $ac_cv_func_mbrtowc = yes; then - -$as_echo "#define HAVE_MBRTOWC 1" >>confdefs.h - - fi - -if test "x${cross_compiling}" != xyes ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether setpgrp takes no argument" >&5 -$as_echo_n "checking whether setpgrp takes no argument... " >&6; } -if ${ac_cv_func_setpgrp_void+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - as_fn_error $? "cannot check setpgrp when cross compiling" "$LINENO" 5 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -/* If this system has a BSD-style setpgrp which takes arguments, - setpgrp(1, 1) will fail with ESRCH and return -1, in that case - exit successfully. */ - return setpgrp (1,1) != -1; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_setpgrp_void=no -else - ac_cv_func_setpgrp_void=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_setpgrp_void" >&5 -$as_echo "$ac_cv_func_setpgrp_void" >&6; } -if test $ac_cv_func_setpgrp_void = yes; then - -$as_echo "#define SETPGRP_VOID 1" >>confdefs.h - -fi - -else - ac_cv_func_setpgrp_void=yes -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5 -$as_echo_n "checking for working strcoll... " >&6; } -if ${ac_cv_func_strcoll_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_strcoll_works=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -return (strcoll ("abc", "def") >= 0 || - strcoll ("ABC", "DEF") >= 0 || - strcoll ("123", "456") >= 0) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_strcoll_works=yes -else - ac_cv_func_strcoll_works=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5 -$as_echo "$ac_cv_func_strcoll_works" >&6; } -if test $ac_cv_func_strcoll_works = yes; then - -$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h - -fi - - - - - -if test "$have_setlocale" != no; then - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; -else - enable_nls=yes -fi - - if test "x$enable_nls" != xno; then - -$as_echo "#define NLS 1" >>confdefs.h - - fi -fi - -if test "x$enable_nls" != xno -a "$have_catgets" != no -a -n "$GENCAT" ; then - # Check whether --enable-nls-catalogs was given. -if test "${enable_nls_catalogs+set}" = set; then : - enableval=$enable_nls_catalogs; -else - enable_nls_catalogs=yes -fi - - if test "x$enable_nls_catalogs" != xno; then - BUILD_CATALOGS="yes" - -$as_echo "#define NLS_CATALOGS 1" >>confdefs.h - - fi -fi - - -# Check whether --with-hesiod was given. -if test "${with_hesiod+set}" = set; then : - withval=$with_hesiod; hesiod="$withval" -else - hesiod=no -fi - -if test "$hesiod" != no; then - HESLIB="-lhesiod" - ac_fn_c_check_func "$LINENO" "res_send" "ac_cv_func_res_send" -if test "x$ac_cv_func_res_send" = xyes; then : - : -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for res_send in -lresolv" >&5 -$as_echo_n "checking for res_send in -lresolv... " >&6; } -if ${ac_cv_lib_resolv_res_send+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lresolv $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char res_send (); -int -main () -{ -return res_send (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_resolv_res_send=yes -else - ac_cv_lib_resolv_res_send=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_resolv_res_send" >&5 -$as_echo "$ac_cv_lib_resolv_res_send" >&6; } -if test "x$ac_cv_lib_resolv_res_send" = xyes; then : - HESLIB="$HESLIB -lresolv" -fi - -fi - - HESDEF=-DHESIOD - if test "$hesiod" != yes; then - HESDEF="$HESDEF -I$hesiod/include" - HESLIB="-L$hesiod/lib $HESLIB" - fi -fi - - - - -ac_config_files="$ac_config_files Makefile nls/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by tcsh $as_me 6.22.03, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -tcsh config.status 6.22.03 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "./atconfig") CONFIG_COMMANDS="$CONFIG_COMMANDS ./atconfig" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "nls/Makefile") CONFIG_FILES="$CONFIG_FILES nls/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "./atconfig":C) cat >./atconfig </dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/contrib/tcsh/imake.config b/contrib/tcsh/imake.config deleted file mode 100644 index 1b93349046b9..000000000000 --- a/contrib/tcsh/imake.config +++ /dev/null @@ -1,63 +0,0 @@ -/* - * config.Imakefile for for tcsh 6.00 - * Marc Horowitz, MIT SIPB - */ - -/* installed location of tcsh, if different than the default in - pathnames.h */ -/* #define TcshPath /afs/sipb/project/tcsh/tcsh */ - -/* The following #define's may be used to cause tcsh to link against -these libraries. If you have one of the machines which is defined in -the Imakefile, the correct libraries will automatically be used. It's -better to set up new definitions in the Imakefile than to put them -here if you're defining support for a new machine, rather than -configuring for local hacks. */ -/* #define UseLibTermcap */ -/* #define UseLibCurses */ -/* #define UseLibNet */ -/* #define UseLibSocket */ -/* #define UseLibBsd */ -/* #define UseLibC_S */ -/* #define UseLibSun */ -/* #define UseLibCposix */ -/* #define UseLibInet */ -/* #define UseLibDir */ -/* #define UseLibX */ -/* #define UseLibIntl */ -/* #define UseLibPosix */ -/* #define UseLibDirent */ - -/* define if you want to use gcc. Your site.def file may already do -this, but it shouldn't hurt. */ -/* #define HasGcc */ - -/* define if you have some different compiler than cc or gcc */ -/* #define MyCC xlc */ - -/* define if you have Hesiod passwd information, and want tcsh to use it */ -/* #define HESIOD */ - -/* define if you have AFS and want to use kerberos passwd authentication */ -/* #define AFS */ -/* define as well if your version of AFS is 3.3 or higher */ -/* #define AFS33 */ - -/* defines installation dir if different from /usr/local. The -executable will be put in TcshTop/bin/tcsh, and the man page in -TcshTop/man/man1/tcsh.1 */ -/* #define TcshTop /afs/sipb/project/tcsh */ - -/* define any of the following if you want to change the compiler flags */ -/* #define MyCflags */ -/* #define MyDefines */ -/* #define MyIncludes */ -/* #define MyLibs */ - -/* By default, the compiler debug flags are -O. Define this if you -want them to be something else. */ -/* #define CDebugFlags -g -O */ - -/* If you want HOSTTYPE to be something other than the default in -tc.vers.c, define it here */ -/* #define HostType decmips */ diff --git a/contrib/tcsh/install-sh b/contrib/tcsh/install-sh deleted file mode 100755 index 6781b987bdbc..000000000000 --- a/contrib/tcsh/install-sh +++ /dev/null @@ -1,520 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2009-04-28.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/contrib/tcsh/svn b/contrib/tcsh/svn deleted file mode 100644 index 7bdceccfa05b..000000000000 --- a/contrib/tcsh/svn +++ /dev/null @@ -1,32 +0,0 @@ -#! /usr/bin/env python2.5 - -import sys -import os - -#for name in os.environ.keys(): -# print "key " + name + " = " + os.environ[name] - -def print_output(cmd, prefix): - pipeOut = os.popen3(cmd, mode = 'br')[1] - for line in pipeOut: - term = "" - if os.path.isdir(line.strip()): - term = "/" - print prefix + line.strip() + term - pipeOut.close() - -if not os.environ.has_key("COMMAND_LINE"): - print "Fancy completion is not supported by your version of tcsh." - sys.exit(1) - -cmdLine = os.environ["COMMAND_LINE"] -URL = cmdLine.split()[2] -dir = "/" + URL.split('/', 3)[3] -prefix = "file:/" - -if dir[-1] != "/": - dir = dir.rpartition("/")[0] + "/" - -print_output("svn ls " + "file://" + dir, prefix + "/" + dir) -print_output("ls -d /" + dir + "*", prefix) -