diff --git a/sys/dev/hid/hmt.c b/sys/dev/hid/hmt.c index 6cfe43157e64..fd50ea4de829 100644 --- a/sys/dev/hid/hmt.c +++ b/sys/dev/hid/hmt.c @@ -1,910 +1,920 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2014-2020 Vladimir Kondratyev * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * MS Windows 7/8/10 compatible HID Multi-touch Device driver. * https://msdn.microsoft.com/en-us/library/windows/hardware/jj151569(v=vs.85).aspx * http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx * https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt */ +#include "opt_hid.h" + #include #include #include #include #include #include #include #include #include #include #include #define HID_DEBUG_VAR hmt_debug #include #include #include #include static SYSCTL_NODE(_hw_hid, OID_AUTO, hmt, CTLFLAG_RW, 0, "MSWindows 7/8/10 compatible HID Multi-touch Device"); #ifdef HID_DEBUG static int hmt_debug = 0; SYSCTL_INT(_hw_hid_hmt, OID_AUTO, debug, CTLFLAG_RWTUN, &hmt_debug, 1, "Debug level"); #endif static bool hmt_timestamps = 0; SYSCTL_BOOL(_hw_hid_hmt, OID_AUTO, timestamps, CTLFLAG_RDTUN, &hmt_timestamps, 1, "Enable hardware timestamp reporting"); #define HMT_BTN_MAX 8 /* Number of buttons supported */ enum hmt_type { HMT_TYPE_UNKNOWN = 0, /* HID report descriptor is not probed */ HMT_TYPE_UNSUPPORTED, /* Repdescr does not belong to MT device */ HMT_TYPE_TOUCHPAD, HMT_TYPE_TOUCHSCREEN, }; enum { HMT_TIP_SWITCH, #define HMT_SLOT HMT_TIP_SWITCH HMT_WIDTH, #define HMT_MAJOR HMT_WIDTH HMT_HEIGHT, #define HMT_MINOR HMT_HEIGHT HMT_ORIENTATION, HMT_X, HMT_Y, HMT_CONTACTID, HMT_PRESSURE, HMT_IN_RANGE, HMT_CONFIDENCE, HMT_TOOL_X, HMT_TOOL_Y, HMT_N_USAGES, }; #define HMT_NO_CODE (ABS_MAX + 10) #define HMT_NO_USAGE -1 struct hmt_hid_map_item { char name[5]; int32_t usage; /* HID usage */ uint32_t code; /* Evdev event code */ bool required; /* Required for MT Digitizers */ }; static const struct hmt_hid_map_item hmt_hid_map[HMT_N_USAGES] = { [HMT_TIP_SWITCH] = { /* HMT_SLOT */ .name = "TIP", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_SWITCH), .code = ABS_MT_SLOT, .required = true, }, [HMT_WIDTH] = { /* HMT_MAJOR */ .name = "WDTH", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_WIDTH), .code = ABS_MT_TOUCH_MAJOR, .required = false, }, [HMT_HEIGHT] = { /* HMT_MINOR */ .name = "HGHT", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_HEIGHT), .code = ABS_MT_TOUCH_MINOR, .required = false, }, [HMT_ORIENTATION] = { .name = "ORIE", .usage = HMT_NO_USAGE, .code = ABS_MT_ORIENTATION, .required = false, }, [HMT_X] = { .name = "X", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), .code = ABS_MT_POSITION_X, .required = true, }, [HMT_Y] = { .name = "Y", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), .code = ABS_MT_POSITION_Y, .required = true, }, [HMT_CONTACTID] = { .name = "C_ID", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTID), .code = ABS_MT_TRACKING_ID, .required = true, }, [HMT_PRESSURE] = { .name = "PRES", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_PRESSURE), .code = ABS_MT_PRESSURE, .required = false, }, [HMT_IN_RANGE] = { .name = "RANG", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_IN_RANGE), .code = ABS_MT_DISTANCE, .required = false, }, [HMT_CONFIDENCE] = { .name = "CONF", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONFIDENCE), .code = HMT_NO_CODE, .required = false, }, [HMT_TOOL_X] = { /* Shares HID usage with HMT_X */ .name = "TL_X", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), .code = ABS_MT_TOOL_X, .required = false, }, [HMT_TOOL_Y] = { /* Shares HID usage with HMT_Y */ .name = "TL_Y", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), .code = ABS_MT_TOOL_Y, .required = false, }, }; struct hmt_softc { device_t dev; enum hmt_type type; struct hid_absinfo ai[HMT_N_USAGES]; struct hid_location locs[MAX_MT_SLOTS][HMT_N_USAGES]; struct hid_location cont_count_loc; struct hid_location btn_loc[HMT_BTN_MAX]; struct hid_location int_btn_loc; struct hid_location scan_time_loc; int32_t scan_time_max; int32_t scan_time; int32_t timestamp; bool touch; bool prev_touch; struct evdev_dev *evdev; uint32_t slot_data[HMT_N_USAGES]; uint8_t caps[howmany(HMT_N_USAGES, 8)]; uint8_t buttons[howmany(HMT_BTN_MAX, 8)]; uint32_t nconts_per_report; uint32_t nconts_todo; uint8_t report_id; uint32_t max_button; bool has_int_button; bool is_clickpad; bool do_timestamps; +#ifdef IICHID_SAMPLING bool iichid_sampling; +#endif struct hid_location cont_max_loc; uint32_t cont_max_rlen; uint8_t cont_max_rid; struct hid_location btn_type_loc; uint32_t btn_type_rlen; uint8_t btn_type_rid; uint32_t thqa_cert_rlen; uint8_t thqa_cert_rid; }; #define HMT_FOREACH_USAGE(caps, usage) \ for ((usage) = 0; (usage) < HMT_N_USAGES; ++(usage)) \ if (isset((caps), (usage))) static enum hmt_type hmt_hid_parse(struct hmt_softc *, const void *, hid_size_t, uint32_t, uint8_t); static int hmt_set_input_mode(struct hmt_softc *, enum hconf_input_mode); static hid_intr_t hmt_intr; static device_probe_t hmt_probe; static device_attach_t hmt_attach; static device_detach_t hmt_detach; static evdev_open_t hmt_ev_open; static evdev_close_t hmt_ev_close; static const struct evdev_methods hmt_evdev_methods = { .ev_open = &hmt_ev_open, .ev_close = &hmt_ev_close, }; static const struct hid_device_id hmt_devs[] = { { HID_TLC(HUP_DIGITIZERS, HUD_TOUCHSCREEN) }, { HID_TLC(HUP_DIGITIZERS, HUD_TOUCHPAD) }, }; static int hmt_ev_close(struct evdev_dev *evdev) { return (hidbus_intr_stop(evdev_get_softc(evdev))); } static int hmt_ev_open(struct evdev_dev *evdev) { return (hidbus_intr_start(evdev_get_softc(evdev))); } static int hmt_probe(device_t dev) { struct hmt_softc *sc = device_get_softc(dev); void *d_ptr; hid_size_t d_len; int err; err = HIDBUS_LOOKUP_DRIVER_INFO(dev, hmt_devs); if (err != 0) return (err); err = hid_get_report_descr(dev, &d_ptr, &d_len); if (err != 0) { device_printf(dev, "could not retrieve report descriptor from " "device: %d\n", err); return (ENXIO); } /* Check if report descriptor belongs to a HID multitouch device */ if (sc->type == HMT_TYPE_UNKNOWN) sc->type = hmt_hid_parse(sc, d_ptr, d_len, hidbus_get_usage(dev), hidbus_get_index(dev)); if (sc->type == HMT_TYPE_UNSUPPORTED) return (ENXIO); hidbus_set_desc(dev, sc->type == HMT_TYPE_TOUCHPAD ? "TouchPad" : "TouchScreen"); return (BUS_PROBE_DEFAULT); } static int hmt_attach(device_t dev) { struct hmt_softc *sc = device_get_softc(dev); const struct hid_device_info *hw = hid_get_device_info(dev); void *d_ptr; uint8_t *fbuf = NULL; hid_size_t d_len, fsize; uint32_t cont_count_max; int nbuttons, btn; size_t i; int err; err = hid_get_report_descr(dev, &d_ptr, &d_len); if (err != 0) { device_printf(dev, "could not retrieve report descriptor from " "device: %d\n", err); return (ENXIO); } sc->dev = dev; fsize = hid_report_size_max(d_ptr, d_len, hid_feature, NULL); if (fsize != 0) fbuf = malloc(fsize, M_TEMP, M_WAITOK | M_ZERO); /* Fetch and parse "Contact count maximum" feature report */ if (sc->cont_max_rlen > 1) { err = hid_get_report(dev, fbuf, sc->cont_max_rlen, NULL, HID_FEATURE_REPORT, sc->cont_max_rid); if (err == 0) { cont_count_max = hid_get_udata(fbuf + 1, sc->cont_max_rlen - 1, &sc->cont_max_loc); /* * Feature report is a primary source of * 'Contact Count Maximum' */ if (cont_count_max > 0) sc->ai[HMT_SLOT].max = cont_count_max - 1; } else DPRINTF("hid_get_report error=%d\n", err); } else DPRINTF("Feature report %hhu size invalid: %u\n", sc->cont_max_rid, sc->cont_max_rlen); /* Fetch and parse "Button type" feature report */ if (sc->btn_type_rlen > 1 && sc->btn_type_rid != sc->cont_max_rid) { bzero(fbuf, fsize); err = hid_get_report(dev, fbuf, sc->btn_type_rlen, NULL, HID_FEATURE_REPORT, sc->btn_type_rid); } if (sc->btn_type_rlen > 1) { if (err == 0) sc->is_clickpad = hid_get_udata(fbuf + 1, sc->btn_type_rlen - 1, &sc->btn_type_loc) == 0; else DPRINTF("hid_get_report error=%d\n", err); } /* Fetch THQA certificate to enable some devices like WaveShare */ if (sc->thqa_cert_rlen > 1 && sc->thqa_cert_rid != sc->cont_max_rid) (void)hid_get_report(dev, fbuf, sc->thqa_cert_rlen, NULL, HID_FEATURE_REPORT, sc->thqa_cert_rid); free(fbuf, M_TEMP); /* Switch touchpad in to absolute multitouch mode */ if (sc->type == HMT_TYPE_TOUCHPAD) { err = hmt_set_input_mode(sc, HCONF_INPUT_MODE_MT_TOUCHPAD); if (err != 0) DPRINTF("Failed to set input mode: %d\n", err); } /* Cap contact count maximum to MAX_MT_SLOTS */ if (sc->ai[HMT_SLOT].max >= MAX_MT_SLOTS) { DPRINTF("Hardware reported %d contacts while only %d is " "supported\n", (int)sc->ai[HMT_SLOT].max+1, MAX_MT_SLOTS); sc->ai[HMT_SLOT].max = MAX_MT_SLOTS - 1; } if (hid_test_quirk(hw, HQ_MT_TIMESTAMP) || hmt_timestamps) sc->do_timestamps = true; +#ifdef IICHID_SAMPLING if (hid_test_quirk(hw, HQ_IICHID_SAMPLING)) sc->iichid_sampling = true; +#endif hidbus_set_intr(dev, hmt_intr, sc); sc->evdev = evdev_alloc(); evdev_set_name(sc->evdev, device_get_desc(dev)); evdev_set_phys(sc->evdev, device_get_nameunit(dev)); evdev_set_id(sc->evdev, hw->idBus, hw->idVendor, hw->idProduct, hw->idVersion); evdev_set_serial(sc->evdev, hw->serial); evdev_set_methods(sc->evdev, dev, &hmt_evdev_methods); evdev_set_flag(sc->evdev, EVDEV_FLAG_MT_STCOMPAT); evdev_set_flag(sc->evdev, EVDEV_FLAG_EXT_EPOCH); /* hidbus child */ switch (sc->type) { case HMT_TYPE_TOUCHSCREEN: evdev_support_prop(sc->evdev, INPUT_PROP_DIRECT); break; case HMT_TYPE_TOUCHPAD: evdev_support_prop(sc->evdev, INPUT_PROP_POINTER); if (sc->is_clickpad) evdev_support_prop(sc->evdev, INPUT_PROP_BUTTONPAD); break; default: KASSERT(0, ("hmt_attach: unsupported touch device type")); } evdev_support_event(sc->evdev, EV_SYN); evdev_support_event(sc->evdev, EV_ABS); if (sc->do_timestamps) { evdev_support_event(sc->evdev, EV_MSC); evdev_support_msc(sc->evdev, MSC_TIMESTAMP); } +#ifdef IICHID_SAMPLING if (sc->iichid_sampling) evdev_set_flag(sc->evdev, EVDEV_FLAG_MT_AUTOREL); +#endif nbuttons = 0; if (sc->max_button != 0 || sc->has_int_button) { evdev_support_event(sc->evdev, EV_KEY); if (sc->has_int_button) evdev_support_key(sc->evdev, BTN_LEFT); for (btn = 0; btn < sc->max_button; ++btn) { if (isset(sc->buttons, btn)) { evdev_support_key(sc->evdev, BTN_MOUSE + btn); nbuttons++; } } } HMT_FOREACH_USAGE(sc->caps, i) { if (hmt_hid_map[i].code != HMT_NO_CODE) evdev_support_abs(sc->evdev, hmt_hid_map[i].code, sc->ai[i].min, sc->ai[i].max, 0, 0, sc->ai[i].res); } err = evdev_register(sc->evdev); if (err) { hmt_detach(dev); return (ENXIO); } /* Announce information about the touch device */ device_printf(sc->dev, "Multitouch %s with %d external button%s%s\n", sc->type == HMT_TYPE_TOUCHSCREEN ? "touchscreen" : "touchpad", nbuttons, nbuttons != 1 ? "s" : "", sc->is_clickpad ? ", click-pad" : ""); device_printf(sc->dev, "%d contacts with [%s%s%s%s%s] properties. Report range [%d:%d] - [%d:%d]\n", (int)sc->ai[HMT_SLOT].max + 1, isset(sc->caps, HMT_IN_RANGE) ? "R" : "", isset(sc->caps, HMT_CONFIDENCE) ? "C" : "", isset(sc->caps, HMT_WIDTH) ? "W" : "", isset(sc->caps, HMT_HEIGHT) ? "H" : "", isset(sc->caps, HMT_PRESSURE) ? "P" : "", (int)sc->ai[HMT_X].min, (int)sc->ai[HMT_Y].min, (int)sc->ai[HMT_X].max, (int)sc->ai[HMT_Y].max); return (0); } static int hmt_detach(device_t dev) { struct hmt_softc *sc = device_get_softc(dev); evdev_free(sc->evdev); return (0); } static void hmt_intr(void *context, void *buf, hid_size_t len) { struct hmt_softc *sc = context; size_t usage; uint32_t *slot_data = sc->slot_data; uint32_t cont, btn; uint32_t cont_count; uint32_t width; uint32_t height; uint32_t int_btn = 0; uint32_t left_btn = 0; int32_t slot; uint32_t scan_time; int32_t delta; uint8_t id; +#ifdef IICHID_SAMPLING /* * Special packet of zero length is generated by iichid driver running * in polling mode at the start of inactivity period to workaround * "stuck touch" problem caused by miss of finger release events. * This snippet is to be removed after GPIO interrupt support is added. */ if (sc->iichid_sampling && len == 0) { sc->prev_touch = false; sc->timestamp = 0; for (slot = 0; slot <= sc->ai[HMT_SLOT].max; slot++) { evdev_push_abs(sc->evdev, ABS_MT_SLOT, slot); evdev_push_abs(sc->evdev, ABS_MT_TRACKING_ID, -1); } evdev_sync(sc->evdev); return; } +#endif /* Ignore irrelevant reports */ id = sc->report_id != 0 ? *(uint8_t *)buf : 0; if (sc->report_id != id) { DPRINTF("Skip report with unexpected ID: %hhu\n", id); return; } /* Strip leading "report ID" byte */ if (sc->report_id != 0) { len--; buf = (uint8_t *)buf + 1; } /* * "In Parallel mode, devices report all contact information in a * single packet. Each physical contact is represented by a logical * collection that is embedded in the top-level collection." * * Since additional contacts that were not present will still be in the * report with contactid=0 but contactids are zero-based, find * contactcount first. */ cont_count = hid_get_udata(buf, len, &sc->cont_count_loc); /* * "In Hybrid mode, the number of contacts that can be reported in one * report is less than the maximum number of contacts that the device * supports. For example, a device that supports a maximum of * 4 concurrent physical contacts, can set up its top-level collection * to deliver a maximum of two contacts in one report. If four contact * points are present, the device can break these up into two serial * reports that deliver two contacts each. * * "When a device delivers data in this manner, the Contact Count usage * value in the first report should reflect the total number of * contacts that are being delivered in the hybrid reports. The other * serial reports should have a contact count of zero (0)." */ if (cont_count != 0) sc->nconts_todo = cont_count; #ifdef HID_DEBUG DPRINTFN(6, "cont_count:%2u", (unsigned)cont_count); if (hmt_debug >= 6) { HMT_FOREACH_USAGE(sc->caps, usage) { if (hmt_hid_map[usage].usage != HMT_NO_USAGE) printf(" %-4s", hmt_hid_map[usage].name); } printf("\n"); } #endif /* Find the number of contacts reported in current report */ cont_count = MIN(sc->nconts_todo, sc->nconts_per_report); /* Use protocol Type B for reporting events */ for (cont = 0; cont < cont_count; cont++) { bzero(slot_data, sizeof(sc->slot_data)); HMT_FOREACH_USAGE(sc->caps, usage) { if (sc->locs[cont][usage].size > 0) slot_data[usage] = hid_get_udata( buf, len, &sc->locs[cont][usage]); } slot = evdev_get_mt_slot_by_tracking_id(sc->evdev, slot_data[HMT_CONTACTID]); #ifdef HID_DEBUG DPRINTFN(6, "cont%01x: data = ", cont); if (hmt_debug >= 6) { HMT_FOREACH_USAGE(sc->caps, usage) { if (hmt_hid_map[usage].usage != HMT_NO_USAGE) printf("%04x ", slot_data[usage]); } printf("slot = %d\n", (int)slot); } #endif if (slot == -1) { DPRINTF("Slot overflow for contact_id %u\n", (unsigned)slot_data[HMT_CONTACTID]); continue; } if (slot_data[HMT_TIP_SWITCH] != 0 && !(isset(sc->caps, HMT_CONFIDENCE) && slot_data[HMT_CONFIDENCE] == 0)) { /* This finger is in proximity of the sensor */ sc->touch = true; slot_data[HMT_SLOT] = slot; slot_data[HMT_IN_RANGE] = !slot_data[HMT_IN_RANGE]; /* Divided by two to match visual scale of touch */ width = slot_data[HMT_WIDTH] >> 1; height = slot_data[HMT_HEIGHT] >> 1; slot_data[HMT_ORIENTATION] = width > height; slot_data[HMT_MAJOR] = MAX(width, height); slot_data[HMT_MINOR] = MIN(width, height); HMT_FOREACH_USAGE(sc->caps, usage) if (hmt_hid_map[usage].code != HMT_NO_CODE) evdev_push_abs(sc->evdev, hmt_hid_map[usage].code, slot_data[usage]); } else { evdev_push_abs(sc->evdev, ABS_MT_SLOT, slot); evdev_push_abs(sc->evdev, ABS_MT_TRACKING_ID, -1); } } sc->nconts_todo -= cont_count; if (sc->do_timestamps && sc->nconts_todo == 0) { /* HUD_SCAN_TIME is measured in 100us, convert to us. */ scan_time = hid_get_udata(buf, len, &sc->scan_time_loc); if (sc->prev_touch) { delta = scan_time - sc->scan_time; if (delta < 0) delta += sc->scan_time_max; } else delta = 0; sc->scan_time = scan_time; sc->timestamp += delta * 100; evdev_push_msc(sc->evdev, MSC_TIMESTAMP, sc->timestamp); sc->prev_touch = sc->touch; sc->touch = false; if (!sc->prev_touch) sc->timestamp = 0; } if (sc->nconts_todo == 0) { /* Report both the click and external left btns as BTN_LEFT */ if (sc->has_int_button) int_btn = hid_get_data(buf, len, &sc->int_btn_loc); if (isset(sc->buttons, 0)) left_btn = hid_get_data(buf, len, &sc->btn_loc[0]); if (sc->has_int_button || isset(sc->buttons, 0)) evdev_push_key(sc->evdev, BTN_LEFT, (int_btn != 0) | (left_btn != 0)); for (btn = 1; btn < sc->max_button; ++btn) { if (isset(sc->buttons, btn)) evdev_push_key(sc->evdev, BTN_MOUSE + btn, hid_get_data(buf, len, &sc->btn_loc[btn]) != 0); } evdev_sync(sc->evdev); } } static enum hmt_type hmt_hid_parse(struct hmt_softc *sc, const void *d_ptr, hid_size_t d_len, uint32_t tlc_usage, uint8_t tlc_index) { struct hid_absinfo ai; struct hid_item hi; struct hid_data *hd; uint32_t flags; size_t i; size_t cont = 0; enum hmt_type type; uint32_t left_btn, btn; int32_t cont_count_max = 0; uint8_t report_id = 0; bool finger_coll = false; bool cont_count_found = false; bool scan_time_found = false; bool has_int_button = false; #define HMT_HI_ABSOLUTE(hi) \ (((hi).flags & (HIO_CONST|HIO_VARIABLE|HIO_RELATIVE)) == HIO_VARIABLE) #define HUMS_THQA_CERT 0xC5 /* * Get left button usage taking in account MS Precision Touchpad specs. * For Windows PTP report descriptor assigns buttons in following way: * Button 1 - Indicates Button State for touchpad button integrated * with digitizer. * Button 2 - Indicates Button State for external button for primary * (default left) clicking. * Button 3 - Indicates Button State for external button for secondary * (default right) clicking. * If a device only supports external buttons, it must still use * Button 2 and Button 3 to reference the external buttons. */ switch (tlc_usage) { case HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHSCREEN): type = HMT_TYPE_TOUCHSCREEN; left_btn = 1; break; case HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHPAD): type = HMT_TYPE_TOUCHPAD; left_btn = 2; break; default: return (HMT_TYPE_UNSUPPORTED); } /* Parse features for mandatory maximum contact count usage */ if (!hidbus_locate(d_ptr, d_len, HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACT_MAX), hid_feature, tlc_index, 0, &sc->cont_max_loc, &flags, &sc->cont_max_rid, &ai) || (flags & (HIO_VARIABLE | HIO_RELATIVE)) != HIO_VARIABLE) return (HMT_TYPE_UNSUPPORTED); cont_count_max = ai.max; /* Parse features for button type usage */ if (hidbus_locate(d_ptr, d_len, HID_USAGE2(HUP_DIGITIZERS, HUD_BUTTON_TYPE), hid_feature, tlc_index, 0, &sc->btn_type_loc, &flags, &sc->btn_type_rid, NULL) && (flags & (HIO_VARIABLE | HIO_RELATIVE)) != HIO_VARIABLE) sc->btn_type_rid = 0; /* Parse features for THQA certificate report ID */ hidbus_locate(d_ptr, d_len, HID_USAGE2(HUP_MICROSOFT, HUMS_THQA_CERT), hid_feature, tlc_index, 0, NULL, NULL, &sc->thqa_cert_rid, NULL); /* Parse input for other parameters */ hd = hid_start_parse(d_ptr, d_len, 1 << hid_input); HIDBUS_FOREACH_ITEM(hd, &hi, tlc_index) { switch (hi.kind) { case hid_collection: if (hi.collevel == 2 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_FINGER)) finger_coll = true; break; case hid_endcollection: if (hi.collevel == 1 && finger_coll) { finger_coll = false; cont++; } break; case hid_input: /* * Ensure that all usages belong to the same report */ if (HMT_HI_ABSOLUTE(hi) && (report_id == 0 || report_id == hi.report_ID)) report_id = hi.report_ID; else break; if (hi.collevel == 1 && left_btn == 2 && hi.usage == HID_USAGE2(HUP_BUTTON, 1)) { has_int_button = true; sc->int_btn_loc = hi.loc; break; } if (hi.collevel == 1 && hi.usage >= HID_USAGE2(HUP_BUTTON, left_btn) && hi.usage <= HID_USAGE2(HUP_BUTTON, HMT_BTN_MAX)) { btn = (hi.usage & 0xFFFF) - left_btn; setbit(sc->buttons, btn); sc->btn_loc[btn] = hi.loc; if (btn >= sc->max_button) sc->max_button = btn + 1; break; } if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTCOUNT)) { cont_count_found = true; sc->cont_count_loc = hi.loc; break; } /* Scan time is required but clobbered by evdev */ if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_SCAN_TIME)) { scan_time_found = true; sc->scan_time_loc = hi.loc; sc->scan_time_max = hi.logical_maximum; break; } if (!finger_coll || hi.collevel != 2) break; if (cont >= MAX_MT_SLOTS) { DPRINTF("Finger %zu ignored\n", cont); break; } for (i = 0; i < HMT_N_USAGES; i++) { if (hi.usage == hmt_hid_map[i].usage) { /* * HUG_X usage is an array mapped to * both ABS_MT_POSITION and ABS_MT_TOOL * events. So don`t stop search if we * already have HUG_X mapping done. */ if (sc->locs[cont][i].size) continue; sc->locs[cont][i] = hi.loc; /* * Hid parser returns valid logical and * physical sizes for first finger only * at least on ElanTS 0x04f3:0x0012. */ if (cont > 0) break; setbit(sc->caps, i); sc->ai[i] = (struct hid_absinfo) { .max = hi.logical_maximum, .min = hi.logical_minimum, .res = hid_item_resolution(&hi), }; break; } } break; default: break; } } hid_end_parse(hd); /* Check for required HID Usages */ if (!cont_count_found || !scan_time_found || cont == 0) return (HMT_TYPE_UNSUPPORTED); for (i = 0; i < HMT_N_USAGES; i++) { if (hmt_hid_map[i].required && isclr(sc->caps, i)) return (HMT_TYPE_UNSUPPORTED); } /* Touchpads must have at least one button */ if (type == HMT_TYPE_TOUCHPAD && !sc->max_button && !has_int_button) return (HMT_TYPE_UNSUPPORTED); /* * According to specifications 'Contact Count Maximum' should be read * from Feature Report rather than from HID descriptor. Set sane * default value now to handle the case of 'Get Report' request failure */ if (cont_count_max < 1) cont_count_max = cont; /* Set number of MT protocol type B slots */ sc->ai[HMT_SLOT] = (struct hid_absinfo) { .min = 0, .max = cont_count_max - 1, .res = 0, }; /* Report touch orientation if both width and height are supported */ if (isset(sc->caps, HMT_WIDTH) && isset(sc->caps, HMT_HEIGHT)) { setbit(sc->caps, HMT_ORIENTATION); sc->ai[HMT_ORIENTATION].max = 1; } sc->cont_max_rlen = hid_report_size(d_ptr, d_len, hid_feature, sc->cont_max_rid); if (sc->btn_type_rid > 0) sc->btn_type_rlen = hid_report_size(d_ptr, d_len, hid_feature, sc->btn_type_rid); if (sc->thqa_cert_rid > 0) sc->thqa_cert_rlen = hid_report_size(d_ptr, d_len, hid_feature, sc->thqa_cert_rid); sc->report_id = report_id; sc->nconts_per_report = cont; sc->has_int_button = has_int_button; return (type); } static int hmt_set_input_mode(struct hmt_softc *sc, enum hconf_input_mode mode) { devclass_t hconf_devclass; device_t hconf; int err; GIANT_REQUIRED; /* Find touchpad's configuration TLC */ hconf = hidbus_find_child(device_get_parent(sc->dev), HID_USAGE2(HUP_DIGITIZERS, HUD_CONFIG)); if (hconf == NULL) return (ENXIO); /* Ensure that hconf driver is attached to configuration TLC */ if (device_is_alive(hconf) == 0) device_probe_and_attach(hconf); if (device_is_attached(hconf) == 0) return (ENXIO); hconf_devclass = devclass_find("hconf"); if (device_get_devclass(hconf) != hconf_devclass) return (ENXIO); /* hconf_set_input_mode can drop the Giant while sleeping */ device_busy(hconf); err = hconf_set_input_mode(hconf, mode); device_unbusy(hconf); return (err); } static devclass_t hmt_devclass; static device_method_t hmt_methods[] = { DEVMETHOD(device_probe, hmt_probe), DEVMETHOD(device_attach, hmt_attach), DEVMETHOD(device_detach, hmt_detach), DEVMETHOD_END }; static driver_t hmt_driver = { .name = "hmt", .methods = hmt_methods, .size = sizeof(struct hmt_softc), }; DRIVER_MODULE(hmt, hidbus, hmt_driver, hmt_devclass, NULL, 0); MODULE_DEPEND(hmt, hidbus, 1, 1, 1); MODULE_DEPEND(hmt, hid, 1, 1, 1); MODULE_DEPEND(hmt, hconf, 1, 1, 1); MODULE_DEPEND(hmt, evdev, 1, 1, 1); MODULE_VERSION(hmt, 1); HID_PNP_INFO(hmt_devs); diff --git a/sys/modules/hid/hmt/Makefile b/sys/modules/hid/hmt/Makefile index f6bed08d439d..975c94fa0b88 100644 --- a/sys/modules/hid/hmt/Makefile +++ b/sys/modules/hid/hmt/Makefile @@ -1,9 +1,10 @@ # $FreeBSD$ .PATH: ${SRCTOP}/sys/dev/hid KMOD= hmt SRCS= hmt.c +SRCS+= opt_hid.h SRCS+= bus_if.h device_if.h .include