diff --git a/include/sys/arc_impl.h b/include/sys/arc_impl.h index defebe3b2fbb..01693d72dda8 100644 --- a/include/sys/arc_impl.h +++ b/include/sys/arc_impl.h @@ -1,1092 +1,1092 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2013, Delphix. All rights reserved. * Copyright (c) 2013, Saso Kiselkov. All rights reserved. * Copyright (c) 2013, Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2020, George Amanakis. All rights reserved. */ #ifndef _SYS_ARC_IMPL_H #define _SYS_ARC_IMPL_H #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * Note that buffers can be in one of 6 states: * ARC_anon - anonymous (discussed below) * ARC_mru - recently used, currently cached * ARC_mru_ghost - recently used, no longer in cache * ARC_mfu - frequently used, currently cached * ARC_mfu_ghost - frequently used, no longer in cache * ARC_uncached - uncacheable prefetch, to be evicted * ARC_l2c_only - exists in L2ARC but not other states * When there are no active references to the buffer, they are * are linked onto a list in one of these arc states. These are * the only buffers that can be evicted or deleted. Within each * state there are multiple lists, one for meta-data and one for * non-meta-data. Meta-data (indirect blocks, blocks of dnodes, * etc.) is tracked separately so that it can be managed more * explicitly: favored over data, limited explicitly. * * Anonymous buffers are buffers that are not associated with * a DVA. These are buffers that hold dirty block copies * before they are written to stable storage. By definition, * they are "ref'd" and are considered part of arc_mru * that cannot be freed. Generally, they will acquire a DVA * as they are written and migrate onto the arc_mru list. * * The ARC_l2c_only state is for buffers that are in the second * level ARC but no longer in any of the ARC_m* lists. The second * level ARC itself may also contain buffers that are in any of * the ARC_m* states - meaning that a buffer can exist in two * places. The reason for the ARC_l2c_only state is to keep the * buffer header in the hash table, so that reads that hit the * second level ARC benefit from these fast lookups. */ typedef struct arc_state { /* * list of evictable buffers */ multilist_t arcs_list[ARC_BUFC_NUMTYPES]; /* * supports the "dbufs" kstat */ arc_state_type_t arcs_state; /* * total amount of data in this state. */ zfs_refcount_t arcs_size[ARC_BUFC_NUMTYPES] ____cacheline_aligned; /* * total amount of evictable data in this state */ zfs_refcount_t arcs_esize[ARC_BUFC_NUMTYPES]; /* * amount of hit bytes for this state (counted only for ghost states) */ wmsum_t arcs_hits[ARC_BUFC_NUMTYPES]; } arc_state_t; typedef struct arc_callback arc_callback_t; struct arc_callback { void *acb_private; arc_read_done_func_t *acb_done; arc_buf_t *acb_buf; boolean_t acb_encrypted; boolean_t acb_compressed; boolean_t acb_noauth; boolean_t acb_nobuf; boolean_t acb_wait; int acb_wait_error; kmutex_t acb_wait_lock; kcondvar_t acb_wait_cv; zbookmark_phys_t acb_zb; zio_t *acb_zio_dummy; zio_t *acb_zio_head; arc_callback_t *acb_prev; arc_callback_t *acb_next; }; typedef struct arc_write_callback arc_write_callback_t; struct arc_write_callback { void *awcb_private; arc_write_done_func_t *awcb_ready; arc_write_done_func_t *awcb_children_ready; arc_write_done_func_t *awcb_done; arc_buf_t *awcb_buf; }; /* * ARC buffers are separated into multiple structs as a memory saving measure: * - Common fields struct, always defined, and embedded within it: * - L2-only fields, always allocated but undefined when not in L2ARC * - L1-only fields, only allocated when in L1ARC * * Buffer in L1 Buffer only in L2 * +------------------------+ +------------------------+ * | arc_buf_hdr_t | | arc_buf_hdr_t | * | | | | * | | | | * | | | | * +------------------------+ +------------------------+ * | l2arc_buf_hdr_t | | l2arc_buf_hdr_t | * | (undefined if L1-only) | | | * +------------------------+ +------------------------+ * | l1arc_buf_hdr_t | * | | * | | * | | * | | * +------------------------+ * * Because it's possible for the L2ARC to become extremely large, we can wind * up eating a lot of memory in L2ARC buffer headers, so the size of a header * is minimized by only allocating the fields necessary for an L1-cached buffer * when a header is actually in the L1 cache. The sub-headers (l1arc_buf_hdr and * l2arc_buf_hdr) are embedded rather than allocated separately to save a couple * words in pointers. arc_hdr_realloc() is used to switch a header between * these two allocation states. */ typedef struct l1arc_buf_hdr { /* protected by arc state mutex */ arc_state_t *b_state; multilist_node_t b_arc_node; /* protected by hash lock */ clock_t b_arc_access; uint32_t b_mru_hits; uint32_t b_mru_ghost_hits; uint32_t b_mfu_hits; uint32_t b_mfu_ghost_hits; uint8_t b_byteswap; arc_buf_t *b_buf; /* self protecting */ zfs_refcount_t b_refcnt; arc_callback_t *b_acb; abd_t *b_pabd; #ifdef ZFS_DEBUG zio_cksum_t *b_freeze_cksum; kmutex_t b_freeze_lock; #endif } l1arc_buf_hdr_t; typedef enum l2arc_dev_hdr_flags_t { L2ARC_DEV_HDR_EVICT_FIRST = (1 << 0) /* mirror of l2ad_first */ } l2arc_dev_hdr_flags_t; /* * Pointer used in persistent L2ARC (for pointing to log blocks). */ typedef struct l2arc_log_blkptr { /* * Offset of log block within the device, in bytes */ uint64_t lbp_daddr; /* * Aligned payload size (in bytes) of the log block */ uint64_t lbp_payload_asize; /* * Offset in bytes of the first buffer in the payload */ uint64_t lbp_payload_start; /* * lbp_prop has the following format: * * logical size (in bytes) * * aligned (after compression) size (in bytes) * * compression algorithm (we always LZ4-compress l2arc logs) * * checksum algorithm (used for lbp_cksum) */ uint64_t lbp_prop; zio_cksum_t lbp_cksum; /* checksum of log */ } l2arc_log_blkptr_t; /* * The persistent L2ARC device header. * Byte order of magic determines whether 64-bit bswap of fields is necessary. */ typedef struct l2arc_dev_hdr_phys { uint64_t dh_magic; /* L2ARC_DEV_HDR_MAGIC */ uint64_t dh_version; /* Persistent L2ARC version */ /* * Global L2ARC device state and metadata. */ uint64_t dh_spa_guid; uint64_t dh_vdev_guid; uint64_t dh_log_entries; /* mirror of l2ad_log_entries */ uint64_t dh_evict; /* evicted offset in bytes */ uint64_t dh_flags; /* l2arc_dev_hdr_flags_t */ /* * Used in zdb.c for determining if a log block is valid, in the same * way that l2arc_rebuild() does. */ uint64_t dh_start; /* mirror of l2ad_start */ uint64_t dh_end; /* mirror of l2ad_end */ /* * Start of log block chain. [0] -> newest log, [1] -> one older (used * for initiating prefetch). */ l2arc_log_blkptr_t dh_start_lbps[2]; /* * Aligned size of all log blocks as accounted by vdev_space_update(). */ uint64_t dh_lb_asize; /* mirror of l2ad_lb_asize */ uint64_t dh_lb_count; /* mirror of l2ad_lb_count */ /* * Mirrors of vdev_trim_action_time and vdev_trim_state, used to * display when the cache device was fully trimmed for the last * time. */ uint64_t dh_trim_action_time; uint64_t dh_trim_state; const uint64_t dh_pad[30]; /* pad to 512 bytes */ zio_eck_t dh_tail; } l2arc_dev_hdr_phys_t; _Static_assert(sizeof (l2arc_dev_hdr_phys_t) == SPA_MINBLOCKSIZE, "l2arc_dev_hdr_phys_t wrong size"); /* * A single ARC buffer header entry in a l2arc_log_blk_phys_t. */ typedef struct l2arc_log_ent_phys { dva_t le_dva; /* dva of buffer */ uint64_t le_birth; /* birth txg of buffer */ /* * le_prop has the following format: * * logical size (in bytes) * * physical (compressed) size (in bytes) * * compression algorithm * * object type (used to restore arc_buf_contents_t) * * protected status (used for encryption) * * prefetch status (used in l2arc_read_done()) */ uint64_t le_prop; uint64_t le_daddr; /* buf location on l2dev */ uint64_t le_complevel; /* * We pad the size of each entry to a power of 2 so that the size of * l2arc_log_blk_phys_t is power-of-2 aligned with SPA_MINBLOCKSHIFT, * because of the L2ARC_SET_*SIZE macros. */ const uint64_t le_pad[2]; /* pad to 64 bytes */ } l2arc_log_ent_phys_t; #define L2ARC_LOG_BLK_MAX_ENTRIES (1022) /* * A log block of up to 1022 ARC buffer log entries, chained into the * persistent L2ARC metadata linked list. Byte order of magic determines * whether 64-bit bswap of fields is necessary. */ typedef struct l2arc_log_blk_phys { uint64_t lb_magic; /* L2ARC_LOG_BLK_MAGIC */ /* * There are 2 chains (headed by dh_start_lbps[2]), and this field * points back to the previous block in this chain. We alternate * which chain we append to, so they are time-wise and offset-wise * interleaved, but that is an optimization rather than for * correctness. */ l2arc_log_blkptr_t lb_prev_lbp; /* pointer to prev log block */ /* * Pad header section to 128 bytes */ uint64_t lb_pad[7]; /* Payload */ l2arc_log_ent_phys_t lb_entries[L2ARC_LOG_BLK_MAX_ENTRIES]; } l2arc_log_blk_phys_t; /* 64K total */ /* * The size of l2arc_log_blk_phys_t has to be power-of-2 aligned with * SPA_MINBLOCKSHIFT because of L2BLK_SET_*SIZE macros. */ _Static_assert(IS_P2ALIGNED(sizeof (l2arc_log_blk_phys_t), 1ULL << SPA_MINBLOCKSHIFT), "l2arc_log_blk_phys_t misaligned"); _Static_assert(sizeof (l2arc_log_blk_phys_t) >= SPA_MINBLOCKSIZE, "l2arc_log_blk_phys_t too small"); _Static_assert(sizeof (l2arc_log_blk_phys_t) <= SPA_MAXBLOCKSIZE, "l2arc_log_blk_phys_t too big"); /* * These structures hold in-flight abd buffers for log blocks as they're being * written to the L2ARC device. */ typedef struct l2arc_lb_abd_buf { abd_t *abd; list_node_t node; } l2arc_lb_abd_buf_t; /* * These structures hold pointers to log blocks present on the L2ARC device. */ typedef struct l2arc_lb_ptr_buf { l2arc_log_blkptr_t *lb_ptr; list_node_t node; } l2arc_lb_ptr_buf_t; /* Macros for setting fields in le_prop and lbp_prop */ #define L2BLK_GET_LSIZE(field) \ BF64_GET_SB((field), 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1) #define L2BLK_SET_LSIZE(field, x) \ BF64_SET_SB((field), 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x) #define L2BLK_GET_PSIZE(field) \ BF64_GET_SB((field), 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1) #define L2BLK_SET_PSIZE(field, x) \ BF64_SET_SB((field), 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1, x) #define L2BLK_GET_COMPRESS(field) \ BF64_GET((field), 32, SPA_COMPRESSBITS) #define L2BLK_SET_COMPRESS(field, x) \ BF64_SET((field), 32, SPA_COMPRESSBITS, x) #define L2BLK_GET_PREFETCH(field) BF64_GET((field), 39, 1) #define L2BLK_SET_PREFETCH(field, x) BF64_SET((field), 39, 1, x) #define L2BLK_GET_CHECKSUM(field) BF64_GET((field), 40, 8) #define L2BLK_SET_CHECKSUM(field, x) BF64_SET((field), 40, 8, x) /* +/- 1 here are to keep compatibility after ARC_BUFC_INVALID removal. */ #define L2BLK_GET_TYPE(field) (BF64_GET((field), 48, 8) - 1) #define L2BLK_SET_TYPE(field, x) BF64_SET((field), 48, 8, (x) + 1) #define L2BLK_GET_PROTECTED(field) BF64_GET((field), 56, 1) #define L2BLK_SET_PROTECTED(field, x) BF64_SET((field), 56, 1, x) #define L2BLK_GET_STATE(field) BF64_GET((field), 57, 4) #define L2BLK_SET_STATE(field, x) BF64_SET((field), 57, 4, x) #define PTR_SWAP(x, y) \ do { \ void *tmp = (x);\ x = y; \ y = tmp; \ } while (0) #define L2ARC_DEV_HDR_MAGIC 0x5a46534341434845LLU /* ASCII: "ZFSCACHE" */ #define L2ARC_LOG_BLK_MAGIC 0x4c4f47424c4b4844LLU /* ASCII: "LOGBLKHD" */ /* * L2ARC Internals */ typedef struct l2arc_dev { vdev_t *l2ad_vdev; /* vdev */ spa_t *l2ad_spa; /* spa */ uint64_t l2ad_hand; /* next write location */ uint64_t l2ad_start; /* first addr on device */ uint64_t l2ad_end; /* last addr on device */ boolean_t l2ad_first; /* first sweep through */ boolean_t l2ad_writing; /* currently writing */ kmutex_t l2ad_mtx; /* lock for buffer list */ list_t l2ad_buflist; /* buffer list */ list_node_t l2ad_node; /* device list node */ zfs_refcount_t l2ad_alloc; /* allocated bytes */ /* * Persistence-related stuff */ l2arc_dev_hdr_phys_t *l2ad_dev_hdr; /* persistent device header */ uint64_t l2ad_dev_hdr_asize; /* aligned hdr size */ l2arc_log_blk_phys_t l2ad_log_blk; /* currently open log block */ int l2ad_log_ent_idx; /* index into cur log blk */ /* Number of bytes in current log block's payload */ uint64_t l2ad_log_blk_payload_asize; /* * Offset (in bytes) of the first buffer in current log block's * payload. */ uint64_t l2ad_log_blk_payload_start; /* Flag indicating whether a rebuild is scheduled or is going on */ boolean_t l2ad_rebuild; boolean_t l2ad_rebuild_cancel; boolean_t l2ad_rebuild_began; uint64_t l2ad_log_entries; /* entries per log blk */ uint64_t l2ad_evict; /* evicted offset in bytes */ /* List of pointers to log blocks present in the L2ARC device */ list_t l2ad_lbptr_list; /* * Aligned size of all log blocks as accounted by vdev_space_update(). */ zfs_refcount_t l2ad_lb_asize; /* * Number of log blocks present on the device. */ zfs_refcount_t l2ad_lb_count; boolean_t l2ad_trim_all; /* TRIM whole device */ } l2arc_dev_t; /* * Encrypted blocks will need to be stored encrypted on the L2ARC * disk as they appear in the main pool. In order for this to work we * need to pass around the encryption parameters so they can be used * to write data to the L2ARC. This struct is only defined in the * arc_buf_hdr_t if the L1 header is defined and has the ARC_FLAG_ENCRYPTED * flag set. */ typedef struct arc_buf_hdr_crypt { abd_t *b_rabd; /* raw encrypted data */ /* dsobj for looking up encryption key for l2arc encryption */ uint64_t b_dsobj; dmu_object_type_t b_ot; /* object type */ /* encryption parameters */ uint8_t b_salt[ZIO_DATA_SALT_LEN]; uint8_t b_iv[ZIO_DATA_IV_LEN]; /* * Technically this could be removed since we will always be able to * get the mac from the bp when we need it. However, it is inconvenient * for callers of arc code to have to pass a bp in all the time. This * also allows us to assert that L2ARC data is properly encrypted to * match the data in the main storage pool. */ uint8_t b_mac[ZIO_DATA_MAC_LEN]; } arc_buf_hdr_crypt_t; typedef struct l2arc_buf_hdr { /* protected by arc_buf_hdr mutex */ l2arc_dev_t *b_dev; /* L2ARC device */ uint64_t b_daddr; /* disk address, offset byte */ uint32_t b_hits; arc_state_type_t b_arcs_state; list_node_t b_l2node; } l2arc_buf_hdr_t; typedef struct l2arc_write_callback { l2arc_dev_t *l2wcb_dev; /* device info */ arc_buf_hdr_t *l2wcb_head; /* head of write buflist */ /* in-flight list of log blocks */ list_t l2wcb_abd_list; } l2arc_write_callback_t; struct arc_buf_hdr { /* protected by hash lock */ dva_t b_dva; uint64_t b_birth; arc_buf_contents_t b_type; uint8_t b_complevel; uint8_t b_reserved1; /* used for 4 byte alignment */ uint16_t b_reserved2; /* used for 4 byte alignment */ arc_buf_hdr_t *b_hash_next; arc_flags_t b_flags; /* * This field stores the size of the data buffer after * compression, and is set in the arc's zio completion handlers. * It is in units of SPA_MINBLOCKSIZE (e.g. 1 == 512 bytes). * * While the block pointers can store up to 32MB in their psize * field, we can only store up to 32MB minus 512B. This is due * to the bp using a bias of 1, whereas we use a bias of 0 (i.e. * a field of zeros represents 512B in the bp). We can't use a * bias of 1 since we need to reserve a psize of zero, here, to * represent holes and embedded blocks. * * This isn't a problem in practice, since the maximum size of a * buffer is limited to 16MB, so we never need to store 32MB in * this field. Even in the upstream illumos code base, the * maximum size of a buffer is limited to 16MB. */ uint16_t b_psize; /* * This field stores the size of the data buffer before * compression, and cannot change once set. It is in units * of SPA_MINBLOCKSIZE (e.g. 2 == 1024 bytes) */ uint16_t b_lsize; /* immutable */ uint64_t b_spa; /* immutable */ /* L2ARC fields. Undefined when not in L2ARC. */ l2arc_buf_hdr_t b_l2hdr; /* L1ARC fields. Undefined when in l2arc_only state */ l1arc_buf_hdr_t b_l1hdr; /* * Encryption parameters. Defined only when ARC_FLAG_ENCRYPTED * is set and the L1 header exists. */ arc_buf_hdr_crypt_t b_crypt_hdr; }; typedef struct arc_stats { /* Number of requests that were satisfied without I/O. */ kstat_named_t arcstat_hits; /* Number of requests for which I/O was already running. */ kstat_named_t arcstat_iohits; /* Number of requests for which I/O has to be issued. */ kstat_named_t arcstat_misses; /* Same three, but specifically for demand data. */ kstat_named_t arcstat_demand_data_hits; kstat_named_t arcstat_demand_data_iohits; kstat_named_t arcstat_demand_data_misses; /* Same three, but specifically for demand metadata. */ kstat_named_t arcstat_demand_metadata_hits; kstat_named_t arcstat_demand_metadata_iohits; kstat_named_t arcstat_demand_metadata_misses; /* Same three, but specifically for prefetch data. */ kstat_named_t arcstat_prefetch_data_hits; kstat_named_t arcstat_prefetch_data_iohits; kstat_named_t arcstat_prefetch_data_misses; /* Same three, but specifically for prefetch metadata. */ kstat_named_t arcstat_prefetch_metadata_hits; kstat_named_t arcstat_prefetch_metadata_iohits; kstat_named_t arcstat_prefetch_metadata_misses; kstat_named_t arcstat_mru_hits; kstat_named_t arcstat_mru_ghost_hits; kstat_named_t arcstat_mfu_hits; kstat_named_t arcstat_mfu_ghost_hits; kstat_named_t arcstat_uncached_hits; kstat_named_t arcstat_deleted; /* * Number of buffers that could not be evicted because the hash lock * was held by another thread. The lock may not necessarily be held * by something using the same buffer, since hash locks are shared * by multiple buffers. */ kstat_named_t arcstat_mutex_miss; /* * Number of buffers skipped when updating the access state due to the * header having already been released after acquiring the hash lock. */ kstat_named_t arcstat_access_skip; /* * Number of buffers skipped because they have I/O in progress, are * indirect prefetch buffers that have not lived long enough, or are * not from the spa we're trying to evict from. */ kstat_named_t arcstat_evict_skip; /* * Number of times arc_evict_state() was unable to evict enough * buffers to reach its target amount. */ kstat_named_t arcstat_evict_not_enough; kstat_named_t arcstat_evict_l2_cached; kstat_named_t arcstat_evict_l2_eligible; kstat_named_t arcstat_evict_l2_eligible_mfu; kstat_named_t arcstat_evict_l2_eligible_mru; kstat_named_t arcstat_evict_l2_ineligible; kstat_named_t arcstat_evict_l2_skip; kstat_named_t arcstat_hash_elements; kstat_named_t arcstat_hash_elements_max; kstat_named_t arcstat_hash_collisions; kstat_named_t arcstat_hash_chains; kstat_named_t arcstat_hash_chain_max; kstat_named_t arcstat_meta; kstat_named_t arcstat_pd; kstat_named_t arcstat_pm; kstat_named_t arcstat_c; kstat_named_t arcstat_c_min; kstat_named_t arcstat_c_max; kstat_named_t arcstat_size; /* * Number of compressed bytes stored in the arc_buf_hdr_t's b_pabd. * Note that the compressed bytes may match the uncompressed bytes * if the block is either not compressed or compressed arc is disabled. */ kstat_named_t arcstat_compressed_size; /* * Uncompressed size of the data stored in b_pabd. If compressed * arc is disabled then this value will be identical to the stat * above. */ kstat_named_t arcstat_uncompressed_size; /* * Number of bytes stored in all the arc_buf_t's. This is classified * as "overhead" since this data is typically short-lived and will * be evicted from the arc when it becomes unreferenced unless the * zfs_keep_uncompressed_metadata or zfs_keep_uncompressed_level * values have been set (see comment in dbuf.c for more information). */ kstat_named_t arcstat_overhead_size; /* * Number of bytes consumed by internal ARC structures necessary * for tracking purposes; these structures are not actually * backed by ARC buffers. This includes arc_buf_hdr_t structures * (allocated via arc_buf_hdr_t_full and arc_buf_hdr_t_l2only * caches), and arc_buf_t structures (allocated via arc_buf_t * cache). */ kstat_named_t arcstat_hdr_size; /* * Number of bytes consumed by ARC buffers of type equal to * ARC_BUFC_DATA. This is generally consumed by buffers backing * on disk user data (e.g. plain file contents). */ kstat_named_t arcstat_data_size; /* * Number of bytes consumed by ARC buffers of type equal to * ARC_BUFC_METADATA. This is generally consumed by buffers * backing on disk data that is used for internal ZFS * structures (e.g. ZAP, dnode, indirect blocks, etc). */ kstat_named_t arcstat_metadata_size; /* * Number of bytes consumed by dmu_buf_impl_t objects. */ kstat_named_t arcstat_dbuf_size; /* * Number of bytes consumed by dnode_t objects. */ kstat_named_t arcstat_dnode_size; /* * Number of bytes consumed by bonus buffers. */ kstat_named_t arcstat_bonus_size; #if defined(COMPAT_FREEBSD11) /* * Sum of the previous three counters, provided for compatibility. */ kstat_named_t arcstat_other_size; #endif /* * Total number of bytes consumed by ARC buffers residing in the * arc_anon state. This includes *all* buffers in the arc_anon * state; e.g. data, metadata, evictable, and unevictable buffers * are all included in this value. */ kstat_named_t arcstat_anon_size; kstat_named_t arcstat_anon_data; kstat_named_t arcstat_anon_metadata; /* * Number of bytes consumed by ARC buffers that meet the * following criteria: backing buffers of type ARC_BUFC_DATA, * residing in the arc_anon state, and are eligible for eviction * (e.g. have no outstanding holds on the buffer). */ kstat_named_t arcstat_anon_evictable_data; /* * Number of bytes consumed by ARC buffers that meet the * following criteria: backing buffers of type ARC_BUFC_METADATA, * residing in the arc_anon state, and are eligible for eviction * (e.g. have no outstanding holds on the buffer). */ kstat_named_t arcstat_anon_evictable_metadata; /* * Total number of bytes consumed by ARC buffers residing in the * arc_mru state. This includes *all* buffers in the arc_mru * state; e.g. data, metadata, evictable, and unevictable buffers * are all included in this value. */ kstat_named_t arcstat_mru_size; kstat_named_t arcstat_mru_data; kstat_named_t arcstat_mru_metadata; /* * Number of bytes consumed by ARC buffers that meet the * following criteria: backing buffers of type ARC_BUFC_DATA, * residing in the arc_mru state, and are eligible for eviction * (e.g. have no outstanding holds on the buffer). */ kstat_named_t arcstat_mru_evictable_data; /* * Number of bytes consumed by ARC buffers that meet the * following criteria: backing buffers of type ARC_BUFC_METADATA, * residing in the arc_mru state, and are eligible for eviction * (e.g. have no outstanding holds on the buffer). */ kstat_named_t arcstat_mru_evictable_metadata; /* * Total number of bytes that *would have been* consumed by ARC * buffers in the arc_mru_ghost state. The key thing to note * here, is the fact that this size doesn't actually indicate * RAM consumption. The ghost lists only consist of headers and * don't actually have ARC buffers linked off of these headers. * Thus, *if* the headers had associated ARC buffers, these * buffers *would have* consumed this number of bytes. */ kstat_named_t arcstat_mru_ghost_size; kstat_named_t arcstat_mru_ghost_data; kstat_named_t arcstat_mru_ghost_metadata; /* * Number of bytes that *would have been* consumed by ARC * buffers that are eligible for eviction, of type * ARC_BUFC_DATA, and linked off the arc_mru_ghost state. */ kstat_named_t arcstat_mru_ghost_evictable_data; /* * Number of bytes that *would have been* consumed by ARC * buffers that are eligible for eviction, of type * ARC_BUFC_METADATA, and linked off the arc_mru_ghost state. */ kstat_named_t arcstat_mru_ghost_evictable_metadata; /* * Total number of bytes consumed by ARC buffers residing in the * arc_mfu state. This includes *all* buffers in the arc_mfu * state; e.g. data, metadata, evictable, and unevictable buffers * are all included in this value. */ kstat_named_t arcstat_mfu_size; kstat_named_t arcstat_mfu_data; kstat_named_t arcstat_mfu_metadata; /* * Number of bytes consumed by ARC buffers that are eligible for * eviction, of type ARC_BUFC_DATA, and reside in the arc_mfu * state. */ kstat_named_t arcstat_mfu_evictable_data; /* * Number of bytes consumed by ARC buffers that are eligible for * eviction, of type ARC_BUFC_METADATA, and reside in the * arc_mfu state. */ kstat_named_t arcstat_mfu_evictable_metadata; /* * Total number of bytes that *would have been* consumed by ARC * buffers in the arc_mfu_ghost state. See the comment above * arcstat_mru_ghost_size for more details. */ kstat_named_t arcstat_mfu_ghost_size; kstat_named_t arcstat_mfu_ghost_data; kstat_named_t arcstat_mfu_ghost_metadata; /* * Number of bytes that *would have been* consumed by ARC * buffers that are eligible for eviction, of type * ARC_BUFC_DATA, and linked off the arc_mfu_ghost state. */ kstat_named_t arcstat_mfu_ghost_evictable_data; /* * Number of bytes that *would have been* consumed by ARC * buffers that are eligible for eviction, of type * ARC_BUFC_METADATA, and linked off the arc_mru_ghost state. */ kstat_named_t arcstat_mfu_ghost_evictable_metadata; /* * Total number of bytes that are going to be evicted from ARC due to * ARC_FLAG_UNCACHED being set. */ kstat_named_t arcstat_uncached_size; kstat_named_t arcstat_uncached_data; kstat_named_t arcstat_uncached_metadata; /* * Number of data bytes that are going to be evicted from ARC due to * ARC_FLAG_UNCACHED being set. */ kstat_named_t arcstat_uncached_evictable_data; /* * Number of metadata bytes that that are going to be evicted from ARC * due to ARC_FLAG_UNCACHED being set. */ kstat_named_t arcstat_uncached_evictable_metadata; kstat_named_t arcstat_l2_hits; kstat_named_t arcstat_l2_misses; /* * Allocated size (in bytes) of L2ARC cached buffers by ARC state. */ kstat_named_t arcstat_l2_prefetch_asize; kstat_named_t arcstat_l2_mru_asize; kstat_named_t arcstat_l2_mfu_asize; /* * Allocated size (in bytes) of L2ARC cached buffers by buffer content * type. */ kstat_named_t arcstat_l2_bufc_data_asize; kstat_named_t arcstat_l2_bufc_metadata_asize; kstat_named_t arcstat_l2_feeds; kstat_named_t arcstat_l2_rw_clash; kstat_named_t arcstat_l2_read_bytes; kstat_named_t arcstat_l2_write_bytes; kstat_named_t arcstat_l2_writes_sent; kstat_named_t arcstat_l2_writes_done; kstat_named_t arcstat_l2_writes_error; kstat_named_t arcstat_l2_writes_lock_retry; kstat_named_t arcstat_l2_evict_lock_retry; kstat_named_t arcstat_l2_evict_reading; kstat_named_t arcstat_l2_evict_l1cached; kstat_named_t arcstat_l2_free_on_write; kstat_named_t arcstat_l2_abort_lowmem; kstat_named_t arcstat_l2_cksum_bad; kstat_named_t arcstat_l2_io_error; kstat_named_t arcstat_l2_lsize; kstat_named_t arcstat_l2_psize; kstat_named_t arcstat_l2_hdr_size; /* * Number of L2ARC log blocks written. These are used for restoring the * L2ARC. Updated during writing of L2ARC log blocks. */ kstat_named_t arcstat_l2_log_blk_writes; /* * Moving average of the aligned size of the L2ARC log blocks, in * bytes. Updated during L2ARC rebuild and during writing of L2ARC * log blocks. */ kstat_named_t arcstat_l2_log_blk_avg_asize; /* Aligned size of L2ARC log blocks on L2ARC devices. */ kstat_named_t arcstat_l2_log_blk_asize; /* Number of L2ARC log blocks present on L2ARC devices. */ kstat_named_t arcstat_l2_log_blk_count; /* * Moving average of the aligned size of L2ARC restored data, in bytes, * to the aligned size of their metadata in L2ARC, in bytes. * Updated during L2ARC rebuild and during writing of L2ARC log blocks. */ kstat_named_t arcstat_l2_data_to_meta_ratio; /* * Number of times the L2ARC rebuild was successful for an L2ARC device. */ kstat_named_t arcstat_l2_rebuild_success; /* * Number of times the L2ARC rebuild failed because the device header * was in an unsupported format or corrupted. */ kstat_named_t arcstat_l2_rebuild_abort_unsupported; /* * Number of times the L2ARC rebuild failed because of IO errors * while reading a log block. */ kstat_named_t arcstat_l2_rebuild_abort_io_errors; /* * Number of times the L2ARC rebuild failed because of IO errors when * reading the device header. */ kstat_named_t arcstat_l2_rebuild_abort_dh_errors; /* * Number of L2ARC log blocks which failed to be restored due to * checksum errors. */ kstat_named_t arcstat_l2_rebuild_abort_cksum_lb_errors; /* * Number of times the L2ARC rebuild was aborted due to low system * memory. */ kstat_named_t arcstat_l2_rebuild_abort_lowmem; /* Logical size of L2ARC restored data, in bytes. */ kstat_named_t arcstat_l2_rebuild_size; /* Aligned size of L2ARC restored data, in bytes. */ kstat_named_t arcstat_l2_rebuild_asize; /* * Number of L2ARC log entries (buffers) that were successfully * restored in ARC. */ kstat_named_t arcstat_l2_rebuild_bufs; /* * Number of L2ARC log entries (buffers) already cached in ARC. These * were not restored again. */ kstat_named_t arcstat_l2_rebuild_bufs_precached; /* * Number of L2ARC log blocks that were restored successfully. Each * log block may hold up to L2ARC_LOG_BLK_MAX_ENTRIES buffers. */ kstat_named_t arcstat_l2_rebuild_log_blks; kstat_named_t arcstat_memory_throttle_count; kstat_named_t arcstat_memory_direct_count; kstat_named_t arcstat_memory_indirect_count; kstat_named_t arcstat_memory_all_bytes; kstat_named_t arcstat_memory_free_bytes; kstat_named_t arcstat_memory_available_bytes; kstat_named_t arcstat_no_grow; kstat_named_t arcstat_tempreserve; kstat_named_t arcstat_loaned_bytes; kstat_named_t arcstat_prune; kstat_named_t arcstat_meta_used; kstat_named_t arcstat_dnode_limit; kstat_named_t arcstat_async_upgrade_sync; /* Number of predictive prefetch requests. */ kstat_named_t arcstat_predictive_prefetch; /* Number of requests for which predictive prefetch has completed. */ kstat_named_t arcstat_demand_hit_predictive_prefetch; /* Number of requests for which predictive prefetch was running. */ kstat_named_t arcstat_demand_iohit_predictive_prefetch; /* Number of prescient prefetch requests. */ kstat_named_t arcstat_prescient_prefetch; /* Number of requests for which prescient prefetch has completed. */ kstat_named_t arcstat_demand_hit_prescient_prefetch; /* Number of requests for which prescient prefetch was running. */ kstat_named_t arcstat_demand_iohit_prescient_prefetch; kstat_named_t arcstat_need_free; kstat_named_t arcstat_sys_free; kstat_named_t arcstat_raw_size; kstat_named_t arcstat_cached_only_in_progress; kstat_named_t arcstat_abd_chunk_waste_size; } arc_stats_t; typedef struct arc_sums { wmsum_t arcstat_hits; wmsum_t arcstat_iohits; wmsum_t arcstat_misses; wmsum_t arcstat_demand_data_hits; wmsum_t arcstat_demand_data_iohits; wmsum_t arcstat_demand_data_misses; wmsum_t arcstat_demand_metadata_hits; wmsum_t arcstat_demand_metadata_iohits; wmsum_t arcstat_demand_metadata_misses; wmsum_t arcstat_prefetch_data_hits; wmsum_t arcstat_prefetch_data_iohits; wmsum_t arcstat_prefetch_data_misses; wmsum_t arcstat_prefetch_metadata_hits; wmsum_t arcstat_prefetch_metadata_iohits; wmsum_t arcstat_prefetch_metadata_misses; wmsum_t arcstat_mru_hits; wmsum_t arcstat_mru_ghost_hits; wmsum_t arcstat_mfu_hits; wmsum_t arcstat_mfu_ghost_hits; wmsum_t arcstat_uncached_hits; wmsum_t arcstat_deleted; wmsum_t arcstat_mutex_miss; wmsum_t arcstat_access_skip; wmsum_t arcstat_evict_skip; wmsum_t arcstat_evict_not_enough; wmsum_t arcstat_evict_l2_cached; wmsum_t arcstat_evict_l2_eligible; wmsum_t arcstat_evict_l2_eligible_mfu; wmsum_t arcstat_evict_l2_eligible_mru; wmsum_t arcstat_evict_l2_ineligible; wmsum_t arcstat_evict_l2_skip; wmsum_t arcstat_hash_collisions; wmsum_t arcstat_hash_chains; aggsum_t arcstat_size; wmsum_t arcstat_compressed_size; wmsum_t arcstat_uncompressed_size; wmsum_t arcstat_overhead_size; wmsum_t arcstat_hdr_size; wmsum_t arcstat_data_size; wmsum_t arcstat_metadata_size; wmsum_t arcstat_dbuf_size; wmsum_t arcstat_dnode_size; wmsum_t arcstat_bonus_size; wmsum_t arcstat_l2_hits; wmsum_t arcstat_l2_misses; wmsum_t arcstat_l2_prefetch_asize; wmsum_t arcstat_l2_mru_asize; wmsum_t arcstat_l2_mfu_asize; wmsum_t arcstat_l2_bufc_data_asize; wmsum_t arcstat_l2_bufc_metadata_asize; wmsum_t arcstat_l2_feeds; wmsum_t arcstat_l2_rw_clash; wmsum_t arcstat_l2_read_bytes; wmsum_t arcstat_l2_write_bytes; wmsum_t arcstat_l2_writes_sent; wmsum_t arcstat_l2_writes_done; wmsum_t arcstat_l2_writes_error; wmsum_t arcstat_l2_writes_lock_retry; wmsum_t arcstat_l2_evict_lock_retry; wmsum_t arcstat_l2_evict_reading; wmsum_t arcstat_l2_evict_l1cached; wmsum_t arcstat_l2_free_on_write; wmsum_t arcstat_l2_abort_lowmem; wmsum_t arcstat_l2_cksum_bad; wmsum_t arcstat_l2_io_error; wmsum_t arcstat_l2_lsize; wmsum_t arcstat_l2_psize; aggsum_t arcstat_l2_hdr_size; wmsum_t arcstat_l2_log_blk_writes; wmsum_t arcstat_l2_log_blk_asize; wmsum_t arcstat_l2_log_blk_count; wmsum_t arcstat_l2_rebuild_success; wmsum_t arcstat_l2_rebuild_abort_unsupported; wmsum_t arcstat_l2_rebuild_abort_io_errors; wmsum_t arcstat_l2_rebuild_abort_dh_errors; wmsum_t arcstat_l2_rebuild_abort_cksum_lb_errors; wmsum_t arcstat_l2_rebuild_abort_lowmem; wmsum_t arcstat_l2_rebuild_size; wmsum_t arcstat_l2_rebuild_asize; wmsum_t arcstat_l2_rebuild_bufs; wmsum_t arcstat_l2_rebuild_bufs_precached; wmsum_t arcstat_l2_rebuild_log_blks; wmsum_t arcstat_memory_throttle_count; wmsum_t arcstat_memory_direct_count; wmsum_t arcstat_memory_indirect_count; wmsum_t arcstat_prune; wmsum_t arcstat_meta_used; wmsum_t arcstat_async_upgrade_sync; wmsum_t arcstat_predictive_prefetch; wmsum_t arcstat_demand_hit_predictive_prefetch; wmsum_t arcstat_demand_iohit_predictive_prefetch; wmsum_t arcstat_prescient_prefetch; wmsum_t arcstat_demand_hit_prescient_prefetch; wmsum_t arcstat_demand_iohit_prescient_prefetch; wmsum_t arcstat_raw_size; wmsum_t arcstat_cached_only_in_progress; wmsum_t arcstat_abd_chunk_waste_size; } arc_sums_t; typedef struct arc_evict_waiter { list_node_t aew_node; kcondvar_t aew_cv; uint64_t aew_count; } arc_evict_waiter_t; #define ARCSTAT(stat) (arc_stats.stat.value.ui64) #define ARCSTAT_INCR(stat, val) \ wmsum_add(&arc_sums.stat, (val)) #define ARCSTAT_BUMP(stat) ARCSTAT_INCR(stat, 1) #define ARCSTAT_BUMPDOWN(stat) ARCSTAT_INCR(stat, -1) #define arc_no_grow ARCSTAT(arcstat_no_grow) /* do not grow cache size */ #define arc_meta ARCSTAT(arcstat_meta) /* target frac of metadata */ #define arc_pd ARCSTAT(arcstat_pd) /* target frac of data MRU */ #define arc_pm ARCSTAT(arcstat_pm) /* target frac of meta MRU */ #define arc_c ARCSTAT(arcstat_c) /* target size of cache */ #define arc_c_min ARCSTAT(arcstat_c_min) /* min target cache size */ #define arc_c_max ARCSTAT(arcstat_c_max) /* max target cache size */ #define arc_sys_free ARCSTAT(arcstat_sys_free) /* target system free bytes */ #define arc_anon (&ARC_anon) #define arc_mru (&ARC_mru) #define arc_mru_ghost (&ARC_mru_ghost) #define arc_mfu (&ARC_mfu) #define arc_mfu_ghost (&ARC_mfu_ghost) #define arc_l2c_only (&ARC_l2c_only) #define arc_uncached (&ARC_uncached) extern taskq_t *arc_prune_taskq; extern arc_stats_t arc_stats; extern arc_sums_t arc_sums; extern hrtime_t arc_growtime; extern boolean_t arc_warm; extern uint_t arc_grow_retry; extern uint_t arc_no_grow_shift; extern uint_t arc_shrink_shift; extern kmutex_t arc_prune_mtx; extern list_t arc_prune_list; extern arc_state_t ARC_mfu; extern arc_state_t ARC_mru; extern uint_t zfs_arc_pc_percent; extern uint_t arc_lotsfree_percent; extern uint64_t zfs_arc_min; extern uint64_t zfs_arc_max; -extern void arc_reduce_target_size(int64_t to_free); +extern uint64_t arc_reduce_target_size(uint64_t to_free); extern boolean_t arc_reclaim_needed(void); extern void arc_kmem_reap_soon(void); -extern void arc_wait_for_eviction(uint64_t, boolean_t); +extern void arc_wait_for_eviction(uint64_t, boolean_t, boolean_t); extern void arc_lowmem_init(void); extern void arc_lowmem_fini(void); extern int arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg); extern uint64_t arc_free_memory(void); extern int64_t arc_available_memory(void); extern void arc_tuning_update(boolean_t); extern void arc_register_hotplug(void); extern void arc_unregister_hotplug(void); extern int param_set_arc_u64(ZFS_MODULE_PARAM_ARGS); extern int param_set_arc_int(ZFS_MODULE_PARAM_ARGS); extern int param_set_arc_min(ZFS_MODULE_PARAM_ARGS); extern int param_set_arc_max(ZFS_MODULE_PARAM_ARGS); /* used in zdb.c */ boolean_t l2arc_log_blkptr_valid(l2arc_dev_t *dev, const l2arc_log_blkptr_t *lbp); /* used in vdev_trim.c */ void l2arc_dev_hdr_update(l2arc_dev_t *dev); l2arc_dev_t *l2arc_vdev_get(vdev_t *vd); #ifdef __cplusplus } #endif #endif /* _SYS_ARC_IMPL_H */ diff --git a/man/man4/zfs.4 b/man/man4/zfs.4 index 3f7485fa78ca..45b6c338aa9e 100644 --- a/man/man4/zfs.4 +++ b/man/man4/zfs.4 @@ -1,2706 +1,2713 @@ .\" .\" Copyright (c) 2013 by Turbo Fredriksson . All rights reserved. .\" Copyright (c) 2019, 2021 by Delphix. All rights reserved. .\" Copyright (c) 2019 Datto Inc. .\" Copyright (c) 2023, 2024 Klara, Inc. .\" The contents of this file are subject to the terms of the Common Development .\" and Distribution License (the "License"). You may not use this file except .\" in compliance with the License. You can obtain a copy of the license at .\" usr/src/OPENSOLARIS.LICENSE or https://opensource.org/licenses/CDDL-1.0. .\" .\" See the License for the specific language governing permissions and .\" limitations under the License. When distributing Covered Code, include this .\" CDDL HEADER in each file and include the License file at .\" usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this .\" CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your .\" own identifying information: .\" Portions Copyright [yyyy] [name of copyright owner] .\" .Dd June 27, 2024 .Dt ZFS 4 .Os . .Sh NAME .Nm zfs .Nd tuning of the ZFS kernel module . .Sh DESCRIPTION The ZFS module supports these parameters: .Bl -tag -width Ds .It Sy dbuf_cache_max_bytes Ns = Ns Sy UINT64_MAX Ns B Pq u64 Maximum size in bytes of the dbuf cache. The target size is determined by the MIN versus .No 1/2^ Ns Sy dbuf_cache_shift Pq 1/32nd of the target ARC size. The behavior of the dbuf cache and its associated settings can be observed via the .Pa /proc/spl/kstat/zfs/dbufstats kstat. . .It Sy dbuf_metadata_cache_max_bytes Ns = Ns Sy UINT64_MAX Ns B Pq u64 Maximum size in bytes of the metadata dbuf cache. The target size is determined by the MIN versus .No 1/2^ Ns Sy dbuf_metadata_cache_shift Pq 1/64th of the target ARC size. The behavior of the metadata dbuf cache and its associated settings can be observed via the .Pa /proc/spl/kstat/zfs/dbufstats kstat. . .It Sy dbuf_cache_hiwater_pct Ns = Ns Sy 10 Ns % Pq uint The percentage over .Sy dbuf_cache_max_bytes when dbufs must be evicted directly. . .It Sy dbuf_cache_lowater_pct Ns = Ns Sy 10 Ns % Pq uint The percentage below .Sy dbuf_cache_max_bytes when the evict thread stops evicting dbufs. . .It Sy dbuf_cache_shift Ns = Ns Sy 5 Pq uint Set the size of the dbuf cache .Pq Sy dbuf_cache_max_bytes to a log2 fraction of the target ARC size. . .It Sy dbuf_metadata_cache_shift Ns = Ns Sy 6 Pq uint Set the size of the dbuf metadata cache .Pq Sy dbuf_metadata_cache_max_bytes to a log2 fraction of the target ARC size. . .It Sy dbuf_mutex_cache_shift Ns = Ns Sy 0 Pq uint Set the size of the mutex array for the dbuf cache. When set to .Sy 0 the array is dynamically sized based on total system memory. . .It Sy dmu_object_alloc_chunk_shift Ns = Ns Sy 7 Po 128 Pc Pq uint dnode slots allocated in a single operation as a power of 2. The default value minimizes lock contention for the bulk operation performed. . .It Sy dmu_prefetch_max Ns = Ns Sy 134217728 Ns B Po 128 MiB Pc Pq uint Limit the amount we can prefetch with one call to this amount in bytes. This helps to limit the amount of memory that can be used by prefetching. . .It Sy ignore_hole_birth Pq int Alias for .Sy send_holes_without_birth_time . . .It Sy l2arc_feed_again Ns = Ns Sy 1 Ns | Ns 0 Pq int Turbo L2ARC warm-up. When the L2ARC is cold the fill interval will be set as fast as possible. . .It Sy l2arc_feed_min_ms Ns = Ns Sy 200 Pq u64 Min feed interval in milliseconds. Requires .Sy l2arc_feed_again Ns = Ns Ar 1 and only applicable in related situations. . .It Sy l2arc_feed_secs Ns = Ns Sy 1 Pq u64 Seconds between L2ARC writing. . .It Sy l2arc_headroom Ns = Ns Sy 8 Pq u64 How far through the ARC lists to search for L2ARC cacheable content, expressed as a multiplier of .Sy l2arc_write_max . ARC persistence across reboots can be achieved with persistent L2ARC by setting this parameter to .Sy 0 , allowing the full length of ARC lists to be searched for cacheable content. . .It Sy l2arc_headroom_boost Ns = Ns Sy 200 Ns % Pq u64 Scales .Sy l2arc_headroom by this percentage when L2ARC contents are being successfully compressed before writing. A value of .Sy 100 disables this feature. . .It Sy l2arc_exclude_special Ns = Ns Sy 0 Ns | Ns 1 Pq int Controls whether buffers present on special vdevs are eligible for caching into L2ARC. If set to 1, exclude dbufs on special vdevs from being cached to L2ARC. . .It Sy l2arc_mfuonly Ns = Ns Sy 0 Ns | Ns 1 Pq int Controls whether only MFU metadata and data are cached from ARC into L2ARC. This may be desired to avoid wasting space on L2ARC when reading/writing large amounts of data that are not expected to be accessed more than once. .Pp The default is off, meaning both MRU and MFU data and metadata are cached. When turning off this feature, some MRU buffers will still be present in ARC and eventually cached on L2ARC. .No If Sy l2arc_noprefetch Ns = Ns Sy 0 , some prefetched buffers will be cached to L2ARC, and those might later transition to MRU, in which case the .Sy l2arc_mru_asize No arcstat will not be Sy 0 . .Pp Regardless of .Sy l2arc_noprefetch , some MFU buffers might be evicted from ARC, accessed later on as prefetches and transition to MRU as prefetches. If accessed again they are counted as MRU and the .Sy l2arc_mru_asize No arcstat will not be Sy 0 . .Pp The ARC status of L2ARC buffers when they were first cached in L2ARC can be seen in the .Sy l2arc_mru_asize , Sy l2arc_mfu_asize , No and Sy l2arc_prefetch_asize arcstats when importing the pool or onlining a cache device if persistent L2ARC is enabled. .Pp The .Sy evict_l2_eligible_mru arcstat does not take into account if this option is enabled as the information provided by the .Sy evict_l2_eligible_m[rf]u arcstats can be used to decide if toggling this option is appropriate for the current workload. . .It Sy l2arc_meta_percent Ns = Ns Sy 33 Ns % Pq uint Percent of ARC size allowed for L2ARC-only headers. Since L2ARC buffers are not evicted on memory pressure, too many headers on a system with an irrationally large L2ARC can render it slow or unusable. This parameter limits L2ARC writes and rebuilds to achieve the target. . .It Sy l2arc_trim_ahead Ns = Ns Sy 0 Ns % Pq u64 Trims ahead of the current write size .Pq Sy l2arc_write_max on L2ARC devices by this percentage of write size if we have filled the device. If set to .Sy 100 we TRIM twice the space required to accommodate upcoming writes. A minimum of .Sy 64 MiB will be trimmed. It also enables TRIM of the whole L2ARC device upon creation or addition to an existing pool or if the header of the device is invalid upon importing a pool or onlining a cache device. A value of .Sy 0 disables TRIM on L2ARC altogether and is the default as it can put significant stress on the underlying storage devices. This will vary depending of how well the specific device handles these commands. . .It Sy l2arc_noprefetch Ns = Ns Sy 1 Ns | Ns 0 Pq int Do not write buffers to L2ARC if they were prefetched but not used by applications. In case there are prefetched buffers in L2ARC and this option is later set, we do not read the prefetched buffers from L2ARC. Unsetting this option is useful for caching sequential reads from the disks to L2ARC and serve those reads from L2ARC later on. This may be beneficial in case the L2ARC device is significantly faster in sequential reads than the disks of the pool. .Pp Use .Sy 1 to disable and .Sy 0 to enable caching/reading prefetches to/from L2ARC. . .It Sy l2arc_norw Ns = Ns Sy 0 Ns | Ns 1 Pq int No reads during writes. . .It Sy l2arc_write_boost Ns = Ns Sy 33554432 Ns B Po 32 MiB Pc Pq u64 Cold L2ARC devices will have .Sy l2arc_write_max increased by this amount while they remain cold. . .It Sy l2arc_write_max Ns = Ns Sy 33554432 Ns B Po 32 MiB Pc Pq u64 Max write bytes per interval. . .It Sy l2arc_rebuild_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Rebuild the L2ARC when importing a pool (persistent L2ARC). This can be disabled if there are problems importing a pool or attaching an L2ARC device (e.g. the L2ARC device is slow in reading stored log metadata, or the metadata has become somehow fragmented/unusable). . .It Sy l2arc_rebuild_blocks_min_l2size Ns = Ns Sy 1073741824 Ns B Po 1 GiB Pc Pq u64 Mininum size of an L2ARC device required in order to write log blocks in it. The log blocks are used upon importing the pool to rebuild the persistent L2ARC. .Pp For L2ARC devices less than 1 GiB, the amount of data .Fn l2arc_evict evicts is significant compared to the amount of restored L2ARC data. In this case, do not write log blocks in L2ARC in order not to waste space. . .It Sy metaslab_aliquot Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq u64 Metaslab granularity, in bytes. This is roughly similar to what would be referred to as the "stripe size" in traditional RAID arrays. In normal operation, ZFS will try to write this amount of data to each disk before moving on to the next top-level vdev. . .It Sy metaslab_bias_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable metaslab group biasing based on their vdevs' over- or under-utilization relative to the pool. . .It Sy metaslab_force_ganging Ns = Ns Sy 16777217 Ns B Po 16 MiB + 1 B Pc Pq u64 Make some blocks above a certain size be gang blocks. This option is used by the test suite to facilitate testing. . .It Sy metaslab_force_ganging_pct Ns = Ns Sy 3 Ns % Pq uint For blocks that could be forced to be a gang block (due to .Sy metaslab_force_ganging ) , force this many of them to be gang blocks. . .It Sy brt_zap_prefetch Ns = Ns Sy 1 Ns | Ns 0 Pq int Controls prefetching BRT records for blocks which are going to be cloned. . .It Sy brt_zap_default_bs Ns = Ns Sy 12 Po 4 KiB Pc Pq int Default BRT ZAP data block size as a power of 2. Note that changing this after creating a BRT on the pool will not affect existing BRTs, only newly created ones. . .It Sy brt_zap_default_ibs Ns = Ns Sy 12 Po 4 KiB Pc Pq int Default BRT ZAP indirect block size as a power of 2. Note that changing this after creating a BRT on the pool will not affect existing BRTs, only newly created ones. . .It Sy ddt_zap_default_bs Ns = Ns Sy 15 Po 32 KiB Pc Pq int Default DDT ZAP data block size as a power of 2. Note that changing this after creating a DDT on the pool will not affect existing DDTs, only newly created ones. . .It Sy ddt_zap_default_ibs Ns = Ns Sy 15 Po 32 KiB Pc Pq int Default DDT ZAP indirect block size as a power of 2. Note that changing this after creating a DDT on the pool will not affect existing DDTs, only newly created ones. . .It Sy zfs_default_bs Ns = Ns Sy 9 Po 512 B Pc Pq int Default dnode block size as a power of 2. . .It Sy zfs_default_ibs Ns = Ns Sy 17 Po 128 KiB Pc Pq int Default dnode indirect block size as a power of 2. . .It Sy zfs_history_output_max Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq u64 When attempting to log an output nvlist of an ioctl in the on-disk history, the output will not be stored if it is larger than this size (in bytes). This must be less than .Sy DMU_MAX_ACCESS Pq 64 MiB . This applies primarily to .Fn zfs_ioc_channel_program Pq cf. Xr zfs-program 8 . . .It Sy zfs_keep_log_spacemaps_at_export Ns = Ns Sy 0 Ns | Ns 1 Pq int Prevent log spacemaps from being destroyed during pool exports and destroys. . .It Sy zfs_metaslab_segment_weight_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable/disable segment-based metaslab selection. . .It Sy zfs_metaslab_switch_threshold Ns = Ns Sy 2 Pq int When using segment-based metaslab selection, continue allocating from the active metaslab until this option's worth of buckets have been exhausted. . .It Sy metaslab_debug_load Ns = Ns Sy 0 Ns | Ns 1 Pq int Load all metaslabs during pool import. . .It Sy metaslab_debug_unload Ns = Ns Sy 0 Ns | Ns 1 Pq int Prevent metaslabs from being unloaded. . .It Sy metaslab_fragmentation_factor_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable use of the fragmentation metric in computing metaslab weights. . .It Sy metaslab_df_max_search Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq uint Maximum distance to search forward from the last offset. Without this limit, fragmented pools can see .Em >100`000 iterations and .Fn metaslab_block_picker becomes the performance limiting factor on high-performance storage. .Pp With the default setting of .Sy 16 MiB , we typically see less than .Em 500 iterations, even with very fragmented .Sy ashift Ns = Ns Sy 9 pools. The maximum number of iterations possible is .Sy metaslab_df_max_search / 2^(ashift+1) . With the default setting of .Sy 16 MiB this is .Em 16*1024 Pq with Sy ashift Ns = Ns Sy 9 or .Em 2*1024 Pq with Sy ashift Ns = Ns Sy 12 . . .It Sy metaslab_df_use_largest_segment Ns = Ns Sy 0 Ns | Ns 1 Pq int If not searching forward (due to .Sy metaslab_df_max_search , metaslab_df_free_pct , .No or Sy metaslab_df_alloc_threshold ) , this tunable controls which segment is used. If set, we will use the largest free segment. If unset, we will use a segment of at least the requested size. . .It Sy zfs_metaslab_max_size_cache_sec Ns = Ns Sy 3600 Ns s Po 1 hour Pc Pq u64 When we unload a metaslab, we cache the size of the largest free chunk. We use that cached size to determine whether or not to load a metaslab for a given allocation. As more frees accumulate in that metaslab while it's unloaded, the cached max size becomes less and less accurate. After a number of seconds controlled by this tunable, we stop considering the cached max size and start considering only the histogram instead. . .It Sy zfs_metaslab_mem_limit Ns = Ns Sy 25 Ns % Pq uint When we are loading a new metaslab, we check the amount of memory being used to store metaslab range trees. If it is over a threshold, we attempt to unload the least recently used metaslab to prevent the system from clogging all of its memory with range trees. This tunable sets the percentage of total system memory that is the threshold. . .It Sy zfs_metaslab_try_hard_before_gang Ns = Ns Sy 0 Ns | Ns 1 Pq int .Bl -item -compact .It If unset, we will first try normal allocation. .It If that fails then we will do a gang allocation. .It If that fails then we will do a "try hard" gang allocation. .It If that fails then we will have a multi-layer gang block. .El .Pp .Bl -item -compact .It If set, we will first try normal allocation. .It If that fails then we will do a "try hard" allocation. .It If that fails we will do a gang allocation. .It If that fails we will do a "try hard" gang allocation. .It If that fails then we will have a multi-layer gang block. .El . .It Sy zfs_metaslab_find_max_tries Ns = Ns Sy 100 Pq uint When not trying hard, we only consider this number of the best metaslabs. This improves performance, especially when there are many metaslabs per vdev and the allocation can't actually be satisfied (so we would otherwise iterate all metaslabs). . .It Sy zfs_vdev_default_ms_count Ns = Ns Sy 200 Pq uint When a vdev is added, target this number of metaslabs per top-level vdev. . .It Sy zfs_vdev_default_ms_shift Ns = Ns Sy 29 Po 512 MiB Pc Pq uint Default lower limit for metaslab size. . .It Sy zfs_vdev_max_ms_shift Ns = Ns Sy 34 Po 16 GiB Pc Pq uint Default upper limit for metaslab size. . .It Sy zfs_vdev_max_auto_ashift Ns = Ns Sy 14 Pq uint Maximum ashift used when optimizing for logical \[->] physical sector size on new top-level vdevs. May be increased up to .Sy ASHIFT_MAX Po 16 Pc , but this may negatively impact pool space efficiency. . .It Sy zfs_vdev_min_auto_ashift Ns = Ns Sy ASHIFT_MIN Po 9 Pc Pq uint Minimum ashift used when creating new top-level vdevs. . .It Sy zfs_vdev_min_ms_count Ns = Ns Sy 16 Pq uint Minimum number of metaslabs to create in a top-level vdev. . .It Sy vdev_validate_skip Ns = Ns Sy 0 Ns | Ns 1 Pq int Skip label validation steps during pool import. Changing is not recommended unless you know what you're doing and are recovering a damaged label. . .It Sy zfs_vdev_ms_count_limit Ns = Ns Sy 131072 Po 128k Pc Pq uint Practical upper limit of total metaslabs per top-level vdev. . .It Sy metaslab_preload_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable metaslab group preloading. . .It Sy metaslab_preload_limit Ns = Ns Sy 10 Pq uint Maximum number of metaslabs per group to preload . .It Sy metaslab_preload_pct Ns = Ns Sy 50 Pq uint Percentage of CPUs to run a metaslab preload taskq . .It Sy metaslab_lba_weighting_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Give more weight to metaslabs with lower LBAs, assuming they have greater bandwidth, as is typically the case on a modern constant angular velocity disk drive. . .It Sy metaslab_unload_delay Ns = Ns Sy 32 Pq uint After a metaslab is used, we keep it loaded for this many TXGs, to attempt to reduce unnecessary reloading. Note that both this many TXGs and .Sy metaslab_unload_delay_ms milliseconds must pass before unloading will occur. . .It Sy metaslab_unload_delay_ms Ns = Ns Sy 600000 Ns ms Po 10 min Pc Pq uint After a metaslab is used, we keep it loaded for this many milliseconds, to attempt to reduce unnecessary reloading. Note, that both this many milliseconds and .Sy metaslab_unload_delay TXGs must pass before unloading will occur. . .It Sy reference_history Ns = Ns Sy 3 Pq uint Maximum reference holders being tracked when reference_tracking_enable is active. .It Sy raidz_expand_max_copy_bytes Ns = Ns Sy 160MB Pq ulong Max amount of memory to use for RAID-Z expansion I/O. This limits how much I/O can be outstanding at once. . .It Sy raidz_expand_max_reflow_bytes Ns = Ns Sy 0 Pq ulong For testing, pause RAID-Z expansion when reflow amount reaches this value. . .It Sy raidz_io_aggregate_rows Ns = Ns Sy 4 Pq ulong For expanded RAID-Z, aggregate reads that have more rows than this. . .It Sy reference_history Ns = Ns Sy 3 Pq int Maximum reference holders being tracked when reference_tracking_enable is active. . .It Sy reference_tracking_enable Ns = Ns Sy 0 Ns | Ns 1 Pq int Track reference holders to .Sy refcount_t objects (debug builds only). . .It Sy send_holes_without_birth_time Ns = Ns Sy 1 Ns | Ns 0 Pq int When set, the .Sy hole_birth optimization will not be used, and all holes will always be sent during a .Nm zfs Cm send . This is useful if you suspect your datasets are affected by a bug in .Sy hole_birth . . .It Sy spa_config_path Ns = Ns Pa /etc/zfs/zpool.cache Pq charp SPA config file. . .It Sy spa_asize_inflation Ns = Ns Sy 24 Pq uint Multiplication factor used to estimate actual disk consumption from the size of data being written. The default value is a worst case estimate, but lower values may be valid for a given pool depending on its configuration. Pool administrators who understand the factors involved may wish to specify a more realistic inflation factor, particularly if they operate close to quota or capacity limits. . .It Sy spa_load_print_vdev_tree Ns = Ns Sy 0 Ns | Ns 1 Pq int Whether to print the vdev tree in the debugging message buffer during pool import. . .It Sy spa_load_verify_data Ns = Ns Sy 1 Ns | Ns 0 Pq int Whether to traverse data blocks during an "extreme rewind" .Pq Fl X import. .Pp An extreme rewind import normally performs a full traversal of all blocks in the pool for verification. If this parameter is unset, the traversal skips non-metadata blocks. It can be toggled once the import has started to stop or start the traversal of non-metadata blocks. . .It Sy spa_load_verify_metadata Ns = Ns Sy 1 Ns | Ns 0 Pq int Whether to traverse blocks during an "extreme rewind" .Pq Fl X pool import. .Pp An extreme rewind import normally performs a full traversal of all blocks in the pool for verification. If this parameter is unset, the traversal is not performed. It can be toggled once the import has started to stop or start the traversal. . .It Sy spa_load_verify_shift Ns = Ns Sy 4 Po 1/16th Pc Pq uint Sets the maximum number of bytes to consume during pool import to the log2 fraction of the target ARC size. . .It Sy spa_slop_shift Ns = Ns Sy 5 Po 1/32nd Pc Pq int Normally, we don't allow the last .Sy 3.2% Pq Sy 1/2^spa_slop_shift of space in the pool to be consumed. This ensures that we don't run the pool completely out of space, due to unaccounted changes (e.g. to the MOS). It also limits the worst-case time to allocate space. If we have less than this amount of free space, most ZPL operations (e.g. write, create) will return .Sy ENOSPC . . .It Sy spa_num_allocators Ns = Ns Sy 4 Pq int Determines the number of block alloctators to use per spa instance. Capped by the number of actual CPUs in the system via .Sy spa_cpus_per_allocator . .Pp Note that setting this value too high could result in performance degredation and/or excess fragmentation. Set value only applies to pools imported/created after that. . .It Sy spa_cpus_per_allocator Ns = Ns Sy 4 Pq int Determines the minimum number of CPUs in a system for block alloctator per spa instance. Set value only applies to pools imported/created after that. . .It Sy spa_upgrade_errlog_limit Ns = Ns Sy 0 Pq uint Limits the number of on-disk error log entries that will be converted to the new format when enabling the .Sy head_errlog feature. The default is to convert all log entries. . .It Sy vdev_removal_max_span Ns = Ns Sy 32768 Ns B Po 32 KiB Pc Pq uint During top-level vdev removal, chunks of data are copied from the vdev which may include free space in order to trade bandwidth for IOPS. This parameter determines the maximum span of free space, in bytes, which will be included as "unnecessary" data in a chunk of copied data. .Pp The default value here was chosen to align with .Sy zfs_vdev_read_gap_limit , which is a similar concept when doing regular reads (but there's no reason it has to be the same). . .It Sy vdev_file_logical_ashift Ns = Ns Sy 9 Po 512 B Pc Pq u64 Logical ashift for file-based devices. . .It Sy vdev_file_physical_ashift Ns = Ns Sy 9 Po 512 B Pc Pq u64 Physical ashift for file-based devices. . .It Sy zap_iterate_prefetch Ns = Ns Sy 1 Ns | Ns 0 Pq int If set, when we start iterating over a ZAP object, prefetch the entire object (all leaf blocks). However, this is limited by .Sy dmu_prefetch_max . . .It Sy zap_micro_max_size Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq int Maximum micro ZAP size. A micro ZAP is upgraded to a fat ZAP, once it grows beyond the specified size. . .It Sy zap_shrink_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int If set, adjacent empty ZAP blocks will be collapsed, reducing disk space. . .It Sy zfetch_min_distance Ns = Ns Sy 4194304 Ns B Po 4 MiB Pc Pq uint Min bytes to prefetch per stream. Prefetch distance starts from the demand access size and quickly grows to this value, doubling on each hit. After that it may grow further by 1/8 per hit, but only if some prefetch since last time haven't completed in time to satisfy demand request, i.e. prefetch depth didn't cover the read latency or the pool got saturated. . .It Sy zfetch_max_distance Ns = Ns Sy 67108864 Ns B Po 64 MiB Pc Pq uint Max bytes to prefetch per stream. . .It Sy zfetch_max_idistance Ns = Ns Sy 67108864 Ns B Po 64 MiB Pc Pq uint Max bytes to prefetch indirects for per stream. . .It Sy zfetch_max_reorder Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq uint Requests within this byte distance from the current prefetch stream position are considered parts of the stream, reordered due to parallel processing. Such requests do not advance the stream position immediately unless .Sy zfetch_hole_shift fill threshold is reached, but saved to fill holes in the stream later. . .It Sy zfetch_max_streams Ns = Ns Sy 8 Pq uint Max number of streams per zfetch (prefetch streams per file). . .It Sy zfetch_min_sec_reap Ns = Ns Sy 1 Pq uint Min time before inactive prefetch stream can be reclaimed . .It Sy zfetch_max_sec_reap Ns = Ns Sy 2 Pq uint Max time before inactive prefetch stream can be deleted . .It Sy zfs_abd_scatter_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enables ARC from using scatter/gather lists and forces all allocations to be linear in kernel memory. Disabling can improve performance in some code paths at the expense of fragmented kernel memory. . .It Sy zfs_abd_scatter_max_order Ns = Ns Sy MAX_ORDER\-1 Pq uint Maximum number of consecutive memory pages allocated in a single block for scatter/gather lists. .Pp The value of .Sy MAX_ORDER depends on kernel configuration. . .It Sy zfs_abd_scatter_min_size Ns = Ns Sy 1536 Ns B Po 1.5 KiB Pc Pq uint This is the minimum allocation size that will use scatter (page-based) ABDs. Smaller allocations will use linear ABDs. . .It Sy zfs_arc_dnode_limit Ns = Ns Sy 0 Ns B Pq u64 When the number of bytes consumed by dnodes in the ARC exceeds this number of bytes, try to unpin some of it in response to demand for non-metadata. This value acts as a ceiling to the amount of dnode metadata, and defaults to .Sy 0 , which indicates that a percent which is based on .Sy zfs_arc_dnode_limit_percent of the ARC meta buffers that may be used for dnodes. .It Sy zfs_arc_dnode_limit_percent Ns = Ns Sy 10 Ns % Pq u64 Percentage that can be consumed by dnodes of ARC meta buffers. .Pp See also .Sy zfs_arc_dnode_limit , which serves a similar purpose but has a higher priority if nonzero. . .It Sy zfs_arc_dnode_reduce_percent Ns = Ns Sy 10 Ns % Pq u64 Percentage of ARC dnodes to try to scan in response to demand for non-metadata when the number of bytes consumed by dnodes exceeds .Sy zfs_arc_dnode_limit . . .It Sy zfs_arc_average_blocksize Ns = Ns Sy 8192 Ns B Po 8 KiB Pc Pq uint The ARC's buffer hash table is sized based on the assumption of an average block size of this value. This works out to roughly 1 MiB of hash table per 1 GiB of physical memory with 8-byte pointers. For configurations with a known larger average block size, this value can be increased to reduce the memory footprint. . .It Sy zfs_arc_eviction_pct Ns = Ns Sy 200 Ns % Pq uint When .Fn arc_is_overflowing , .Fn arc_get_data_impl waits for this percent of the requested amount of data to be evicted. For example, by default, for every .Em 2 KiB that's evicted, .Em 1 KiB of it may be "reused" by a new allocation. Since this is above .Sy 100 Ns % , it ensures that progress is made towards getting .Sy arc_size No under Sy arc_c . Since this is finite, it ensures that allocations can still happen, even during the potentially long time that .Sy arc_size No is more than Sy arc_c . . .It Sy zfs_arc_evict_batch_limit Ns = Ns Sy 10 Pq uint Number ARC headers to evict per sub-list before proceeding to another sub-list. This batch-style operation prevents entire sub-lists from being evicted at once but comes at a cost of additional unlocking and locking. . .It Sy zfs_arc_grow_retry Ns = Ns Sy 0 Ns s Pq uint If set to a non zero value, it will replace the .Sy arc_grow_retry value with this value. The .Sy arc_grow_retry .No value Pq default Sy 5 Ns s is the number of seconds the ARC will wait before trying to resume growth after a memory pressure event. . .It Sy zfs_arc_lotsfree_percent Ns = Ns Sy 10 Ns % Pq int Throttle I/O when free system memory drops below this percentage of total system memory. Setting this value to .Sy 0 will disable the throttle. . .It Sy zfs_arc_max Ns = Ns Sy 0 Ns B Pq u64 Max size of ARC in bytes. If .Sy 0 , then the max size of ARC is determined by the amount of system memory installed. The larger of .Sy all_system_memory No \- Sy 1 GiB and .Sy 5/8 No \(mu Sy all_system_memory will be used as the limit. This value must be at least .Sy 67108864 Ns B Pq 64 MiB . .Pp This value can be changed dynamically, with some caveats. It cannot be set back to .Sy 0 while running, and reducing it below the current ARC size will not cause the ARC to shrink without memory pressure to induce shrinking. . .It Sy zfs_arc_meta_balance Ns = Ns Sy 500 Pq uint Balance between metadata and data on ghost hits. Values above 100 increase metadata caching by proportionally reducing effect of ghost data hits on target data/metadata rate. . .It Sy zfs_arc_min Ns = Ns Sy 0 Ns B Pq u64 Min size of ARC in bytes. .No If set to Sy 0 , arc_c_min will default to consuming the larger of .Sy 32 MiB and .Sy all_system_memory No / Sy 32 . . .It Sy zfs_arc_min_prefetch_ms Ns = Ns Sy 0 Ns ms Ns Po Ns ≡ Ns 1s Pc Pq uint Minimum time prefetched blocks are locked in the ARC. . .It Sy zfs_arc_min_prescient_prefetch_ms Ns = Ns Sy 0 Ns ms Ns Po Ns ≡ Ns 6s Pc Pq uint Minimum time "prescient prefetched" blocks are locked in the ARC. These blocks are meant to be prefetched fairly aggressively ahead of the code that may use them. . .It Sy zfs_arc_prune_task_threads Ns = Ns Sy 1 Pq int Number of arc_prune threads. .Fx does not need more than one. Linux may theoretically use one per mount point up to number of CPUs, but that was not proven to be useful. . .It Sy zfs_max_missing_tvds Ns = Ns Sy 0 Pq int Number of missing top-level vdevs which will be allowed during pool import (only in read-only mode). . .It Sy zfs_max_nvlist_src_size Ns = Sy 0 Pq u64 Maximum size in bytes allowed to be passed as .Sy zc_nvlist_src_size for ioctls on .Pa /dev/zfs . This prevents a user from causing the kernel to allocate an excessive amount of memory. When the limit is exceeded, the ioctl fails with .Sy EINVAL and a description of the error is sent to the .Pa zfs-dbgmsg log. This parameter should not need to be touched under normal circumstances. If .Sy 0 , equivalent to a quarter of the user-wired memory limit under .Fx and to .Sy 134217728 Ns B Pq 128 MiB under Linux. . .It Sy zfs_multilist_num_sublists Ns = Ns Sy 0 Pq uint To allow more fine-grained locking, each ARC state contains a series of lists for both data and metadata objects. Locking is performed at the level of these "sub-lists". This parameters controls the number of sub-lists per ARC state, and also applies to other uses of the multilist data structure. .Pp If .Sy 0 , equivalent to the greater of the number of online CPUs and .Sy 4 . . .It Sy zfs_arc_overflow_shift Ns = Ns Sy 8 Pq int The ARC size is considered to be overflowing if it exceeds the current ARC target size .Pq Sy arc_c by thresholds determined by this parameter. Exceeding by .Sy ( arc_c No >> Sy zfs_arc_overflow_shift ) No / Sy 2 starts ARC reclamation process. If that appears insufficient, exceeding by .Sy ( arc_c No >> Sy zfs_arc_overflow_shift ) No \(mu Sy 1.5 blocks new buffer allocation until the reclaim thread catches up. Started reclamation process continues till ARC size returns below the target size. .Pp The default value of .Sy 8 causes the ARC to start reclamation if it exceeds the target size by .Em 0.2% of the target size, and block allocations by .Em 0.6% . . .It Sy zfs_arc_shrink_shift Ns = Ns Sy 0 Pq uint If nonzero, this will update .Sy arc_shrink_shift Pq default Sy 7 with the new value. . .It Sy zfs_arc_pc_percent Ns = Ns Sy 0 Ns % Po off Pc Pq uint Percent of pagecache to reclaim ARC to. .Pp This tunable allows the ZFS ARC to play more nicely with the kernel's LRU pagecache. It can guarantee that the ARC size won't collapse under scanning pressure on the pagecache, yet still allows the ARC to be reclaimed down to .Sy zfs_arc_min if necessary. This value is specified as percent of pagecache size (as measured by .Sy NR_FILE_PAGES ) , where that percent may exceed .Sy 100 . This only operates during memory pressure/reclaim. . .It Sy zfs_arc_shrinker_limit Ns = Ns Sy 10000 Pq int This is a limit on how many pages the ARC shrinker makes available for eviction in response to one page allocation attempt. Note that in practice, the kernel's shrinker can ask us to evict up to about four times this for one allocation attempt. .Pp The default limit of .Sy 10000 Pq in practice, Em 160 MiB No per allocation attempt with 4 KiB pages limits the amount of time spent attempting to reclaim ARC memory to less than 100 ms per allocation attempt, even with a small average compressed block size of ~8 KiB. .Pp The parameter can be set to 0 (zero) to disable the limit, and only applies on Linux. . +.It Sy zfs_arc_shrinker_seeks Ns = Ns Sy 2 Pq int +Relative cost of ARC eviction on Linux, AKA number of seeks needed to +restore evicted page. +Bigger values make ARC more precious and evictions smaller, comparing to +other kernel subsystems. +Value of 4 means parity with page cache. +. .It Sy zfs_arc_sys_free Ns = Ns Sy 0 Ns B Pq u64 The target number of bytes the ARC should leave as free memory on the system. If zero, equivalent to the bigger of .Sy 512 KiB No and Sy all_system_memory/64 . . .It Sy zfs_autoimport_disable Ns = Ns Sy 1 Ns | Ns 0 Pq int Disable pool import at module load by ignoring the cache file .Pq Sy spa_config_path . . .It Sy zfs_checksum_events_per_second Ns = Ns Sy 20 Ns /s Pq uint Rate limit checksum events to this many per second. Note that this should not be set below the ZED thresholds (currently 10 checksums over 10 seconds) or else the daemon may not trigger any action. . .It Sy zfs_commit_timeout_pct Ns = Ns Sy 10 Ns % Pq uint This controls the amount of time that a ZIL block (lwb) will remain "open" when it isn't "full", and it has a thread waiting for it to be committed to stable storage. The timeout is scaled based on a percentage of the last lwb latency to avoid significantly impacting the latency of each individual transaction record (itx). . .It Sy zfs_condense_indirect_commit_entry_delay_ms Ns = Ns Sy 0 Ns ms Pq int Vdev indirection layer (used for device removal) sleeps for this many milliseconds during mapping generation. Intended for use with the test suite to throttle vdev removal speed. . .It Sy zfs_condense_indirect_obsolete_pct Ns = Ns Sy 25 Ns % Pq uint Minimum percent of obsolete bytes in vdev mapping required to attempt to condense .Pq see Sy zfs_condense_indirect_vdevs_enable . Intended for use with the test suite to facilitate triggering condensing as needed. . .It Sy zfs_condense_indirect_vdevs_enable Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable condensing indirect vdev mappings. When set, attempt to condense indirect vdev mappings if the mapping uses more than .Sy zfs_condense_min_mapping_bytes bytes of memory and if the obsolete space map object uses more than .Sy zfs_condense_max_obsolete_bytes bytes on-disk. The condensing process is an attempt to save memory by removing obsolete mappings. . .It Sy zfs_condense_max_obsolete_bytes Ns = Ns Sy 1073741824 Ns B Po 1 GiB Pc Pq u64 Only attempt to condense indirect vdev mappings if the on-disk size of the obsolete space map object is greater than this number of bytes .Pq see Sy zfs_condense_indirect_vdevs_enable . . .It Sy zfs_condense_min_mapping_bytes Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq u64 Minimum size vdev mapping to attempt to condense .Pq see Sy zfs_condense_indirect_vdevs_enable . . .It Sy zfs_dbgmsg_enable Ns = Ns Sy 1 Ns | Ns 0 Pq int Internally ZFS keeps a small log to facilitate debugging. The log is enabled by default, and can be disabled by unsetting this option. The contents of the log can be accessed by reading .Pa /proc/spl/kstat/zfs/dbgmsg . Writing .Sy 0 to the file clears the log. .Pp This setting does not influence debug prints due to .Sy zfs_flags . . .It Sy zfs_dbgmsg_maxsize Ns = Ns Sy 4194304 Ns B Po 4 MiB Pc Pq uint Maximum size of the internal ZFS debug log. . .It Sy zfs_dbuf_state_index Ns = Ns Sy 0 Pq int Historically used for controlling what reporting was available under .Pa /proc/spl/kstat/zfs . No effect. . .It Sy zfs_deadman_checktime_ms Ns = Ns Sy 60000 Ns ms Po 1 min Pc Pq u64 Check time in milliseconds. This defines the frequency at which we check for hung I/O requests and potentially invoke the .Sy zfs_deadman_failmode behavior. . .It Sy zfs_deadman_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int When a pool sync operation takes longer than .Sy zfs_deadman_synctime_ms , or when an individual I/O operation takes longer than .Sy zfs_deadman_ziotime_ms , then the operation is considered to be "hung". If .Sy zfs_deadman_enabled is set, then the deadman behavior is invoked as described by .Sy zfs_deadman_failmode . By default, the deadman is enabled and set to .Sy wait which results in "hung" I/O operations only being logged. The deadman is automatically disabled when a pool gets suspended. . .It Sy zfs_deadman_events_per_second Ns = Ns Sy 1 Ns /s Pq int Rate limit deadman zevents (which report hung I/O operations) to this many per second. . .It Sy zfs_deadman_failmode Ns = Ns Sy wait Pq charp Controls the failure behavior when the deadman detects a "hung" I/O operation. Valid values are: .Bl -tag -compact -offset 4n -width "continue" .It Sy wait Wait for a "hung" operation to complete. For each "hung" operation a "deadman" event will be posted describing that operation. .It Sy continue Attempt to recover from a "hung" operation by re-dispatching it to the I/O pipeline if possible. .It Sy panic Panic the system. This can be used to facilitate automatic fail-over to a properly configured fail-over partner. .El . .It Sy zfs_deadman_synctime_ms Ns = Ns Sy 600000 Ns ms Po 10 min Pc Pq u64 Interval in milliseconds after which the deadman is triggered and also the interval after which a pool sync operation is considered to be "hung". Once this limit is exceeded the deadman will be invoked every .Sy zfs_deadman_checktime_ms milliseconds until the pool sync completes. . .It Sy zfs_deadman_ziotime_ms Ns = Ns Sy 300000 Ns ms Po 5 min Pc Pq u64 Interval in milliseconds after which the deadman is triggered and an individual I/O operation is considered to be "hung". As long as the operation remains "hung", the deadman will be invoked every .Sy zfs_deadman_checktime_ms milliseconds until the operation completes. . .It Sy zfs_dedup_prefetch Ns = Ns Sy 0 Ns | Ns 1 Pq int Enable prefetching dedup-ed blocks which are going to be freed. . .It Sy zfs_delay_min_dirty_percent Ns = Ns Sy 60 Ns % Pq uint Start to delay each transaction once there is this amount of dirty data, expressed as a percentage of .Sy zfs_dirty_data_max . This value should be at least .Sy zfs_vdev_async_write_active_max_dirty_percent . .No See Sx ZFS TRANSACTION DELAY . . .It Sy zfs_delay_scale Ns = Ns Sy 500000 Pq int This controls how quickly the transaction delay approaches infinity. Larger values cause longer delays for a given amount of dirty data. .Pp For the smoothest delay, this value should be about 1 billion divided by the maximum number of operations per second. This will smoothly handle between ten times and a tenth of this number. .No See Sx ZFS TRANSACTION DELAY . .Pp .Sy zfs_delay_scale No \(mu Sy zfs_dirty_data_max Em must No be smaller than Sy 2^64 . . .It Sy zfs_disable_ivset_guid_check Ns = Ns Sy 0 Ns | Ns 1 Pq int Disables requirement for IVset GUIDs to be present and match when doing a raw receive of encrypted datasets. Intended for users whose pools were created with OpenZFS pre-release versions and now have compatibility issues. . .It Sy zfs_key_max_salt_uses Ns = Ns Sy 400000000 Po 4*10^8 Pc Pq ulong Maximum number of uses of a single salt value before generating a new one for encrypted datasets. The default value is also the maximum. . .It Sy zfs_object_mutex_size Ns = Ns Sy 64 Pq uint Size of the znode hashtable used for holds. .Pp Due to the need to hold locks on objects that may not exist yet, kernel mutexes are not created per-object and instead a hashtable is used where collisions will result in objects waiting when there is not actually contention on the same object. . .It Sy zfs_slow_io_events_per_second Ns = Ns Sy 20 Ns /s Pq int Rate limit delay zevents (which report slow I/O operations) to this many per second. . .It Sy zfs_unflushed_max_mem_amt Ns = Ns Sy 1073741824 Ns B Po 1 GiB Pc Pq u64 Upper-bound limit for unflushed metadata changes to be held by the log spacemap in memory, in bytes. . .It Sy zfs_unflushed_max_mem_ppm Ns = Ns Sy 1000 Ns ppm Po 0.1% Pc Pq u64 Part of overall system memory that ZFS allows to be used for unflushed metadata changes by the log spacemap, in millionths. . .It Sy zfs_unflushed_log_block_max Ns = Ns Sy 131072 Po 128k Pc Pq u64 Describes the maximum number of log spacemap blocks allowed for each pool. The default value means that the space in all the log spacemaps can add up to no more than .Sy 131072 blocks (which means .Em 16 GiB of logical space before compression and ditto blocks, assuming that blocksize is .Em 128 KiB ) . .Pp This tunable is important because it involves a trade-off between import time after an unclean export and the frequency of flushing metaslabs. The higher this number is, the more log blocks we allow when the pool is active which means that we flush metaslabs less often and thus decrease the number of I/O operations for spacemap updates per TXG. At the same time though, that means that in the event of an unclean export, there will be more log spacemap blocks for us to read, inducing overhead in the import time of the pool. The lower the number, the amount of flushing increases, destroying log blocks quicker as they become obsolete faster, which leaves less blocks to be read during import time after a crash. .Pp Each log spacemap block existing during pool import leads to approximately one extra logical I/O issued. This is the reason why this tunable is exposed in terms of blocks rather than space used. . .It Sy zfs_unflushed_log_block_min Ns = Ns Sy 1000 Pq u64 If the number of metaslabs is small and our incoming rate is high, we could get into a situation that we are flushing all our metaslabs every TXG. Thus we always allow at least this many log blocks. . .It Sy zfs_unflushed_log_block_pct Ns = Ns Sy 400 Ns % Pq u64 Tunable used to determine the number of blocks that can be used for the spacemap log, expressed as a percentage of the total number of unflushed metaslabs in the pool. . .It Sy zfs_unflushed_log_txg_max Ns = Ns Sy 1000 Pq u64 Tunable limiting maximum time in TXGs any metaslab may remain unflushed. It effectively limits maximum number of unflushed per-TXG spacemap logs that need to be read after unclean pool export. . .It Sy zfs_unlink_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq uint When enabled, files will not be asynchronously removed from the list of pending unlinks and the space they consume will be leaked. Once this option has been disabled and the dataset is remounted, the pending unlinks will be processed and the freed space returned to the pool. This option is used by the test suite. . .It Sy zfs_delete_blocks Ns = Ns Sy 20480 Pq ulong This is the used to define a large file for the purposes of deletion. Files containing more than .Sy zfs_delete_blocks will be deleted asynchronously, while smaller files are deleted synchronously. Decreasing this value will reduce the time spent in an .Xr unlink 2 system call, at the expense of a longer delay before the freed space is available. This only applies on Linux. . .It Sy zfs_dirty_data_max Ns = Pq int Determines the dirty space limit in bytes. Once this limit is exceeded, new writes are halted until space frees up. This parameter takes precedence over .Sy zfs_dirty_data_max_percent . .No See Sx ZFS TRANSACTION DELAY . .Pp Defaults to .Sy physical_ram/10 , capped at .Sy zfs_dirty_data_max_max . . .It Sy zfs_dirty_data_max_max Ns = Pq int Maximum allowable value of .Sy zfs_dirty_data_max , expressed in bytes. This limit is only enforced at module load time, and will be ignored if .Sy zfs_dirty_data_max is later changed. This parameter takes precedence over .Sy zfs_dirty_data_max_max_percent . .No See Sx ZFS TRANSACTION DELAY . .Pp Defaults to .Sy min(physical_ram/4, 4GiB) , or .Sy min(physical_ram/4, 1GiB) for 32-bit systems. . .It Sy zfs_dirty_data_max_max_percent Ns = Ns Sy 25 Ns % Pq uint Maximum allowable value of .Sy zfs_dirty_data_max , expressed as a percentage of physical RAM. This limit is only enforced at module load time, and will be ignored if .Sy zfs_dirty_data_max is later changed. The parameter .Sy zfs_dirty_data_max_max takes precedence over this one. .No See Sx ZFS TRANSACTION DELAY . . .It Sy zfs_dirty_data_max_percent Ns = Ns Sy 10 Ns % Pq uint Determines the dirty space limit, expressed as a percentage of all memory. Once this limit is exceeded, new writes are halted until space frees up. The parameter .Sy zfs_dirty_data_max takes precedence over this one. .No See Sx ZFS TRANSACTION DELAY . .Pp Subject to .Sy zfs_dirty_data_max_max . . .It Sy zfs_dirty_data_sync_percent Ns = Ns Sy 20 Ns % Pq uint Start syncing out a transaction group if there's at least this much dirty data .Pq as a percentage of Sy zfs_dirty_data_max . This should be less than .Sy zfs_vdev_async_write_active_min_dirty_percent . . .It Sy zfs_wrlog_data_max Ns = Pq int The upper limit of write-transaction zil log data size in bytes. Write operations are throttled when approaching the limit until log data is cleared out after transaction group sync. Because of some overhead, it should be set at least 2 times the size of .Sy zfs_dirty_data_max .No to prevent harming normal write throughput . It also should be smaller than the size of the slog device if slog is present. .Pp Defaults to .Sy zfs_dirty_data_max*2 . .It Sy zfs_fallocate_reserve_percent Ns = Ns Sy 110 Ns % Pq uint Since ZFS is a copy-on-write filesystem with snapshots, blocks cannot be preallocated for a file in order to guarantee that later writes will not run out of space. Instead, .Xr fallocate 2 space preallocation only checks that sufficient space is currently available in the pool or the user's project quota allocation, and then creates a sparse file of the requested size. The requested space is multiplied by .Sy zfs_fallocate_reserve_percent to allow additional space for indirect blocks and other internal metadata. Setting this to .Sy 0 disables support for .Xr fallocate 2 and causes it to return .Sy EOPNOTSUPP . . .It Sy zfs_fletcher_4_impl Ns = Ns Sy fastest Pq string Select a fletcher 4 implementation. .Pp Supported selectors are: .Sy fastest , scalar , sse2 , ssse3 , avx2 , avx512f , avx512bw , .No and Sy aarch64_neon . All except .Sy fastest No and Sy scalar require instruction set extensions to be available, and will only appear if ZFS detects that they are present at runtime. If multiple implementations of fletcher 4 are available, the .Sy fastest will be chosen using a micro benchmark. Selecting .Sy scalar results in the original CPU-based calculation being used. Selecting any option other than .Sy fastest No or Sy scalar results in vector instructions from the respective CPU instruction set being used. . .It Sy zfs_bclone_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable the experimental block cloning feature. If this setting is 0, then even if feature@block_cloning is enabled, attempts to clone blocks will act as though the feature is disabled. . .It Sy zfs_bclone_wait_dirty Ns = Ns Sy 0 Ns | Ns 1 Pq int When set to 1 the FICLONE and FICLONERANGE ioctls wait for dirty data to be written to disk. This allows the clone operation to reliably succeed when a file is modified and then immediately cloned. For small files this may be slower than making a copy of the file. Therefore, this setting defaults to 0 which causes a clone operation to immediately fail when encountering a dirty block. . .It Sy zfs_blake3_impl Ns = Ns Sy fastest Pq string Select a BLAKE3 implementation. .Pp Supported selectors are: .Sy cycle , fastest , generic , sse2 , sse41 , avx2 , avx512 . All except .Sy cycle , fastest No and Sy generic require instruction set extensions to be available, and will only appear if ZFS detects that they are present at runtime. If multiple implementations of BLAKE3 are available, the .Sy fastest will be chosen using a micro benchmark. You can see the benchmark results by reading this kstat file: .Pa /proc/spl/kstat/zfs/chksum_bench . . .It Sy zfs_free_bpobj_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable/disable the processing of the free_bpobj object. . .It Sy zfs_async_block_max_blocks Ns = Ns Sy UINT64_MAX Po unlimited Pc Pq u64 Maximum number of blocks freed in a single TXG. . .It Sy zfs_max_async_dedup_frees Ns = Ns Sy 100000 Po 10^5 Pc Pq u64 Maximum number of dedup blocks freed in a single TXG. . .It Sy zfs_vdev_async_read_max_active Ns = Ns Sy 3 Pq uint Maximum asynchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_read_min_active Ns = Ns Sy 1 Pq uint Minimum asynchronous read I/O operation active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_active_max_dirty_percent Ns = Ns Sy 60 Ns % Pq uint When the pool has more than this much dirty data, use .Sy zfs_vdev_async_write_max_active to limit active async writes. If the dirty data is between the minimum and maximum, the active I/O limit is linearly interpolated. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_active_min_dirty_percent Ns = Ns Sy 30 Ns % Pq uint When the pool has less than this much dirty data, use .Sy zfs_vdev_async_write_min_active to limit active async writes. If the dirty data is between the minimum and maximum, the active I/O limit is linearly interpolated. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_max_active Ns = Ns Sy 10 Pq uint Maximum asynchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_async_write_min_active Ns = Ns Sy 2 Pq uint Minimum asynchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . .Pp Lower values are associated with better latency on rotational media but poorer resilver performance. The default value of .Sy 2 was chosen as a compromise. A value of .Sy 3 has been shown to improve resilver performance further at a cost of further increasing latency. . .It Sy zfs_vdev_initializing_max_active Ns = Ns Sy 1 Pq uint Maximum initializing I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_initializing_min_active Ns = Ns Sy 1 Pq uint Minimum initializing I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_max_active Ns = Ns Sy 1000 Pq uint The maximum number of I/O operations active to each device. Ideally, this will be at least the sum of each queue's .Sy max_active . .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_open_timeout_ms Ns = Ns Sy 1000 Pq uint Timeout value to wait before determining a device is missing during import. This is helpful for transient missing paths due to links being briefly removed and recreated in response to udev events. . .It Sy zfs_vdev_rebuild_max_active Ns = Ns Sy 3 Pq uint Maximum sequential resilver I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_rebuild_min_active Ns = Ns Sy 1 Pq uint Minimum sequential resilver I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_removal_max_active Ns = Ns Sy 2 Pq uint Maximum removal I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_removal_min_active Ns = Ns Sy 1 Pq uint Minimum removal I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_scrub_max_active Ns = Ns Sy 2 Pq uint Maximum scrub I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_scrub_min_active Ns = Ns Sy 1 Pq uint Minimum scrub I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_read_max_active Ns = Ns Sy 10 Pq uint Maximum synchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_read_min_active Ns = Ns Sy 10 Pq uint Minimum synchronous read I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_write_max_active Ns = Ns Sy 10 Pq uint Maximum synchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_sync_write_min_active Ns = Ns Sy 10 Pq uint Minimum synchronous write I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_trim_max_active Ns = Ns Sy 2 Pq uint Maximum trim/discard I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_trim_min_active Ns = Ns Sy 1 Pq uint Minimum trim/discard I/O operations active to each device. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_nia_delay Ns = Ns Sy 5 Pq uint For non-interactive I/O (scrub, resilver, removal, initialize and rebuild), the number of concurrently-active I/O operations is limited to .Sy zfs_*_min_active , unless the vdev is "idle". When there are no interactive I/O operations active (synchronous or otherwise), and .Sy zfs_vdev_nia_delay operations have completed since the last interactive operation, then the vdev is considered to be "idle", and the number of concurrently-active non-interactive operations is increased to .Sy zfs_*_max_active . .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_nia_credit Ns = Ns Sy 5 Pq uint Some HDDs tend to prioritize sequential I/O so strongly, that concurrent random I/O latency reaches several seconds. On some HDDs this happens even if sequential I/O operations are submitted one at a time, and so setting .Sy zfs_*_max_active Ns = Sy 1 does not help. To prevent non-interactive I/O, like scrub, from monopolizing the device, no more than .Sy zfs_vdev_nia_credit operations can be sent while there are outstanding incomplete interactive operations. This enforced wait ensures the HDD services the interactive I/O within a reasonable amount of time. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_queue_depth_pct Ns = Ns Sy 1000 Ns % Pq uint Maximum number of queued allocations per top-level vdev expressed as a percentage of .Sy zfs_vdev_async_write_max_active , which allows the system to detect devices that are more capable of handling allocations and to allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced, as fuller devices will tend to be slower than empty devices. .Pp Also see .Sy zio_dva_throttle_enabled . . .It Sy zfs_vdev_def_queue_depth Ns = Ns Sy 32 Pq uint Default queue depth for each vdev IO allocator. Higher values allow for better coalescing of sequential writes before sending them to the disk, but can increase transaction commit times. . .It Sy zfs_vdev_failfast_mask Ns = Ns Sy 1 Pq uint Defines if the driver should retire on a given error type. The following options may be bitwise-ored together: .TS box; lbz r l l . Value Name Description _ 1 Device No driver retries on device errors 2 Transport No driver retries on transport errors. 4 Driver No driver retries on driver errors. .TE . .It Sy zfs_vdev_disk_max_segs Ns = Ns Sy 0 Pq uint Maximum number of segments to add to a BIO (min 4). If this is higher than the maximum allowed by the device queue or the kernel itself, it will be clamped. Setting it to zero will cause the kernel's ideal size to be used. This parameter only applies on Linux. This parameter is ignored if .Sy zfs_vdev_disk_classic Ns = Ns Sy 1 . . .It Sy zfs_vdev_disk_classic Ns = Ns Sy 0 Ns | Ns 1 Pq uint If set to 1, OpenZFS will submit IO to Linux using the method it used in 2.2 and earlier. This "classic" method has known issues with highly fragmented IO requests and is slower on many workloads, but it has been in use for many years and is known to be very stable. If you set this parameter, please also open a bug report why you did so, including the workload involved and any error messages. .Pp This parameter and the classic submission method will be removed once we have total confidence in the new method. .Pp This parameter only applies on Linux, and can only be set at module load time. . .It Sy zfs_expire_snapshot Ns = Ns Sy 300 Ns s Pq int Time before expiring .Pa .zfs/snapshot . . .It Sy zfs_admin_snapshot Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow the creation, removal, or renaming of entries in the .Sy .zfs/snapshot directory to cause the creation, destruction, or renaming of snapshots. When enabled, this functionality works both locally and over NFS exports which have the .Em no_root_squash option set. . .It Sy zfs_flags Ns = Ns Sy 0 Pq int Set additional debugging flags. The following flags may be bitwise-ored together: .TS box; lbz r l l . Value Name Description _ 1 ZFS_DEBUG_DPRINTF Enable dprintf entries in the debug log. * 2 ZFS_DEBUG_DBUF_VERIFY Enable extra dbuf verifications. * 4 ZFS_DEBUG_DNODE_VERIFY Enable extra dnode verifications. 8 ZFS_DEBUG_SNAPNAMES Enable snapshot name verification. * 16 ZFS_DEBUG_MODIFY Check for illegally modified ARC buffers. 64 ZFS_DEBUG_ZIO_FREE Enable verification of block frees. 128 ZFS_DEBUG_HISTOGRAM_VERIFY Enable extra spacemap histogram verifications. 256 ZFS_DEBUG_METASLAB_VERIFY Verify space accounting on disk matches in-memory \fBrange_trees\fP. 512 ZFS_DEBUG_SET_ERROR Enable \fBSET_ERROR\fP and dprintf entries in the debug log. 1024 ZFS_DEBUG_INDIRECT_REMAP Verify split blocks created by device removal. 2048 ZFS_DEBUG_TRIM Verify TRIM ranges are always within the allocatable range tree. 4096 ZFS_DEBUG_LOG_SPACEMAP Verify that the log summary is consistent with the spacemap log and enable \fBzfs_dbgmsgs\fP for metaslab loading and flushing. .TE .Sy \& * No Requires debug build . . .It Sy zfs_btree_verify_intensity Ns = Ns Sy 0 Pq uint Enables btree verification. The following settings are culminative: .TS box; lbz r l l . Value Description 1 Verify height. 2 Verify pointers from children to parent. 3 Verify element counts. 4 Verify element order. (expensive) * 5 Verify unused memory is poisoned. (expensive) .TE .Sy \& * No Requires debug build . . .It Sy zfs_free_leak_on_eio Ns = Ns Sy 0 Ns | Ns 1 Pq int If destroy encounters an .Sy EIO while reading metadata (e.g. indirect blocks), space referenced by the missing metadata can not be freed. Normally this causes the background destroy to become "stalled", as it is unable to make forward progress. While in this stalled state, all remaining space to free from the error-encountering filesystem is "temporarily leaked". Set this flag to cause it to ignore the .Sy EIO , permanently leak the space from indirect blocks that can not be read, and continue to free everything else that it can. .Pp The default "stalling" behavior is useful if the storage partially fails (i.e. some but not all I/O operations fail), and then later recovers. In this case, we will be able to continue pool operations while it is partially failed, and when it recovers, we can continue to free the space, with no leaks. Note, however, that this case is actually fairly rare. .Pp Typically pools either .Bl -enum -compact -offset 4n -width "1." .It fail completely (but perhaps temporarily, e.g. due to a top-level vdev going offline), or .It have localized, permanent errors (e.g. disk returns the wrong data due to bit flip or firmware bug). .El In the former case, this setting does not matter because the pool will be suspended and the sync thread will not be able to make forward progress regardless. In the latter, because the error is permanent, the best we can do is leak the minimum amount of space, which is what setting this flag will do. It is therefore reasonable for this flag to normally be set, but we chose the more conservative approach of not setting it, so that there is no possibility of leaking space in the "partial temporary" failure case. . .It Sy zfs_free_min_time_ms Ns = Ns Sy 1000 Ns ms Po 1s Pc Pq uint During a .Nm zfs Cm destroy operation using the .Sy async_destroy feature, a minimum of this much time will be spent working on freeing blocks per TXG. . .It Sy zfs_obsolete_min_time_ms Ns = Ns Sy 500 Ns ms Pq uint Similar to .Sy zfs_free_min_time_ms , but for cleanup of old indirection records for removed vdevs. . .It Sy zfs_immediate_write_sz Ns = Ns Sy 32768 Ns B Po 32 KiB Pc Pq s64 Largest data block to write to the ZIL. Larger blocks will be treated as if the dataset being written to had the .Sy logbias Ns = Ns Sy throughput property set. . .It Sy zfs_initialize_value Ns = Ns Sy 16045690984833335022 Po 0xDEADBEEFDEADBEEE Pc Pq u64 Pattern written to vdev free space by .Xr zpool-initialize 8 . . .It Sy zfs_initialize_chunk_size Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq u64 Size of writes used by .Xr zpool-initialize 8 . This option is used by the test suite. . .It Sy zfs_livelist_max_entries Ns = Ns Sy 500000 Po 5*10^5 Pc Pq u64 The threshold size (in block pointers) at which we create a new sub-livelist. Larger sublists are more costly from a memory perspective but the fewer sublists there are, the lower the cost of insertion. . .It Sy zfs_livelist_min_percent_shared Ns = Ns Sy 75 Ns % Pq int If the amount of shared space between a snapshot and its clone drops below this threshold, the clone turns off the livelist and reverts to the old deletion method. This is in place because livelists no long give us a benefit once a clone has been overwritten enough. . .It Sy zfs_livelist_condense_new_alloc Ns = Ns Sy 0 Pq int Incremented each time an extra ALLOC blkptr is added to a livelist entry while it is being condensed. This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_sync_cancel Ns = Ns Sy 0 Pq int Incremented each time livelist condensing is canceled while in .Fn spa_livelist_condense_sync . This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_sync_pause Ns = Ns Sy 0 Ns | Ns 1 Pq int When set, the livelist condense process pauses indefinitely before executing the synctask \(em .Fn spa_livelist_condense_sync . This option is used by the test suite to trigger race conditions. . .It Sy zfs_livelist_condense_zthr_cancel Ns = Ns Sy 0 Pq int Incremented each time livelist condensing is canceled while in .Fn spa_livelist_condense_cb . This option is used by the test suite to track race conditions. . .It Sy zfs_livelist_condense_zthr_pause Ns = Ns Sy 0 Ns | Ns 1 Pq int When set, the livelist condense process pauses indefinitely before executing the open context condensing work in .Fn spa_livelist_condense_cb . This option is used by the test suite to trigger race conditions. . .It Sy zfs_lua_max_instrlimit Ns = Ns Sy 100000000 Po 10^8 Pc Pq u64 The maximum execution time limit that can be set for a ZFS channel program, specified as a number of Lua instructions. . .It Sy zfs_lua_max_memlimit Ns = Ns Sy 104857600 Po 100 MiB Pc Pq u64 The maximum memory limit that can be set for a ZFS channel program, specified in bytes. . .It Sy zfs_max_dataset_nesting Ns = Ns Sy 50 Pq int The maximum depth of nested datasets. This value can be tuned temporarily to fix existing datasets that exceed the predefined limit. . .It Sy zfs_max_log_walking Ns = Ns Sy 5 Pq u64 The number of past TXGs that the flushing algorithm of the log spacemap feature uses to estimate incoming log blocks. . .It Sy zfs_max_logsm_summary_length Ns = Ns Sy 10 Pq u64 Maximum number of rows allowed in the summary of the spacemap log. . .It Sy zfs_max_recordsize Ns = Ns Sy 16777216 Po 16 MiB Pc Pq uint We currently support block sizes from .Em 512 Po 512 B Pc No to Em 16777216 Po 16 MiB Pc . The benefits of larger blocks, and thus larger I/O, need to be weighed against the cost of COWing a giant block to modify one byte. Additionally, very large blocks can have an impact on I/O latency, and also potentially on the memory allocator. Therefore, we formerly forbade creating blocks larger than 1M. Larger blocks could be created by changing it, and pools with larger blocks can always be imported and used, regardless of this setting. . .It Sy zfs_allow_redacted_dataset_mount Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow datasets received with redacted send/receive to be mounted. Normally disabled because these datasets may be missing key data. . .It Sy zfs_min_metaslabs_to_flush Ns = Ns Sy 1 Pq u64 Minimum number of metaslabs to flush per dirty TXG. . .It Sy zfs_metaslab_fragmentation_threshold Ns = Ns Sy 70 Ns % Pq uint Allow metaslabs to keep their active state as long as their fragmentation percentage is no more than this value. An active metaslab that exceeds this threshold will no longer keep its active status allowing better metaslabs to be selected. . .It Sy zfs_mg_fragmentation_threshold Ns = Ns Sy 95 Ns % Pq uint Metaslab groups are considered eligible for allocations if their fragmentation metric (measured as a percentage) is less than or equal to this value. If a metaslab group exceeds this threshold then it will be skipped unless all metaslab groups within the metaslab class have also crossed this threshold. . .It Sy zfs_mg_noalloc_threshold Ns = Ns Sy 0 Ns % Pq uint Defines a threshold at which metaslab groups should be eligible for allocations. The value is expressed as a percentage of free space beyond which a metaslab group is always eligible for allocations. If a metaslab group's free space is less than or equal to the threshold, the allocator will avoid allocating to that group unless all groups in the pool have reached the threshold. Once all groups have reached the threshold, all groups are allowed to accept allocations. The default value of .Sy 0 disables the feature and causes all metaslab groups to be eligible for allocations. .Pp This parameter allows one to deal with pools having heavily imbalanced vdevs such as would be the case when a new vdev has been added. Setting the threshold to a non-zero percentage will stop allocations from being made to vdevs that aren't filled to the specified percentage and allow lesser filled vdevs to acquire more allocations than they otherwise would under the old .Sy zfs_mg_alloc_failures facility. . .It Sy zfs_ddt_data_is_special Ns = Ns Sy 1 Ns | Ns 0 Pq int If enabled, ZFS will place DDT data into the special allocation class. . .It Sy zfs_user_indirect_is_special Ns = Ns Sy 1 Ns | Ns 0 Pq int If enabled, ZFS will place user data indirect blocks into the special allocation class. . .It Sy zfs_multihost_history Ns = Ns Sy 0 Pq uint Historical statistics for this many latest multihost updates will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /multihost . . .It Sy zfs_multihost_interval Ns = Ns Sy 1000 Ns ms Po 1 s Pc Pq u64 Used to control the frequency of multihost writes which are performed when the .Sy multihost pool property is on. This is one of the factors used to determine the length of the activity check during import. .Pp The multihost write period is .Sy zfs_multihost_interval No / Sy leaf-vdevs . On average a multihost write will be issued for each leaf vdev every .Sy zfs_multihost_interval milliseconds. In practice, the observed period can vary with the I/O load and this observed value is the delay which is stored in the uberblock. . .It Sy zfs_multihost_import_intervals Ns = Ns Sy 20 Pq uint Used to control the duration of the activity test on import. Smaller values of .Sy zfs_multihost_import_intervals will reduce the import time but increase the risk of failing to detect an active pool. The total activity check time is never allowed to drop below one second. .Pp On import the activity check waits a minimum amount of time determined by .Sy zfs_multihost_interval No \(mu Sy zfs_multihost_import_intervals , or the same product computed on the host which last had the pool imported, whichever is greater. The activity check time may be further extended if the value of MMP delay found in the best uberblock indicates actual multihost updates happened at longer intervals than .Sy zfs_multihost_interval . A minimum of .Em 100 ms is enforced. .Pp .Sy 0 No is equivalent to Sy 1 . . .It Sy zfs_multihost_fail_intervals Ns = Ns Sy 10 Pq uint Controls the behavior of the pool when multihost write failures or delays are detected. .Pp When .Sy 0 , multihost write failures or delays are ignored. The failures will still be reported to the ZED which depending on its configuration may take action such as suspending the pool or offlining a device. .Pp Otherwise, the pool will be suspended if .Sy zfs_multihost_fail_intervals No \(mu Sy zfs_multihost_interval milliseconds pass without a successful MMP write. This guarantees the activity test will see MMP writes if the pool is imported. .Sy 1 No is equivalent to Sy 2 ; this is necessary to prevent the pool from being suspended due to normal, small I/O latency variations. . .It Sy zfs_no_scrub_io Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to disable scrub I/O. This results in scrubs not actually scrubbing data and simply doing a metadata crawl of the pool instead. . .It Sy zfs_no_scrub_prefetch Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to disable block prefetching for scrubs. . .It Sy zfs_nocacheflush Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable cache flush operations on disks when writing. Setting this will cause pool corruption on power loss if a volatile out-of-order write cache is enabled. . .It Sy zfs_nopwrite_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Allow no-operation writes. The occurrence of nopwrites will further depend on other pool properties .Pq i.a. the checksumming and compression algorithms . . .It Sy zfs_dmu_offset_next_sync Ns = Ns Sy 1 Ns | Ns 0 Pq int Enable forcing TXG sync to find holes. When enabled forces ZFS to sync data when .Sy SEEK_HOLE No or Sy SEEK_DATA flags are used allowing holes in a file to be accurately reported. When disabled holes will not be reported in recently dirtied files. . .It Sy zfs_pd_bytes_max Ns = Ns Sy 52428800 Ns B Po 50 MiB Pc Pq int The number of bytes which should be prefetched during a pool traversal, like .Nm zfs Cm send or other data crawling operations. . .It Sy zfs_traverse_indirect_prefetch_limit Ns = Ns Sy 32 Pq uint The number of blocks pointed by indirect (non-L0) block which should be prefetched during a pool traversal, like .Nm zfs Cm send or other data crawling operations. . .It Sy zfs_per_txg_dirty_frees_percent Ns = Ns Sy 30 Ns % Pq u64 Control percentage of dirtied indirect blocks from frees allowed into one TXG. After this threshold is crossed, additional frees will wait until the next TXG. .Sy 0 No disables this throttle . . .It Sy zfs_prefetch_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable predictive prefetch. Note that it leaves "prescient" prefetch .Pq for, e.g., Nm zfs Cm send intact. Unlike predictive prefetch, prescient prefetch never issues I/O that ends up not being needed, so it can't hurt performance. . .It Sy zfs_qat_checksum_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for SHA256 checksums. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_qat_compress_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for gzip compression. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_qat_encrypt_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable QAT hardware acceleration for AES-GCM encryption. May be unset after the ZFS modules have been loaded to initialize the QAT hardware as long as support is compiled in and the QAT driver is present. . .It Sy zfs_vnops_read_chunk_size Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq u64 Bytes to read per chunk. . .It Sy zfs_read_history Ns = Ns Sy 0 Pq uint Historical statistics for this many latest reads will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /reads . . .It Sy zfs_read_history_hits Ns = Ns Sy 0 Ns | Ns 1 Pq int Include cache hits in read history . .It Sy zfs_rebuild_max_segment Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq u64 Maximum read segment size to issue when sequentially resilvering a top-level vdev. . .It Sy zfs_rebuild_scrub_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Automatically start a pool scrub when the last active sequential resilver completes in order to verify the checksums of all blocks which have been resilvered. This is enabled by default and strongly recommended. . .It Sy zfs_rebuild_vdev_limit Ns = Ns Sy 67108864 Ns B Po 64 MiB Pc Pq u64 Maximum amount of I/O that can be concurrently issued for a sequential resilver per leaf device, given in bytes. . .It Sy zfs_reconstruct_indirect_combinations_max Ns = Ns Sy 4096 Pq int If an indirect split block contains more than this many possible unique combinations when being reconstructed, consider it too computationally expensive to check them all. Instead, try at most this many randomly selected combinations each time the block is accessed. This allows all segment copies to participate fairly in the reconstruction when all combinations cannot be checked and prevents repeated use of one bad copy. . .It Sy zfs_recover Ns = Ns Sy 0 Ns | Ns 1 Pq int Set to attempt to recover from fatal errors. This should only be used as a last resort, as it typically results in leaked space, or worse. . .It Sy zfs_removal_ignore_errors Ns = Ns Sy 0 Ns | Ns 1 Pq int Ignore hard I/O errors during device removal. When set, if a device encounters a hard I/O error during the removal process the removal will not be cancelled. This can result in a normally recoverable block becoming permanently damaged and is hence not recommended. This should only be used as a last resort when the pool cannot be returned to a healthy state prior to removing the device. . .It Sy zfs_removal_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq uint This is used by the test suite so that it can ensure that certain actions happen while in the middle of a removal. . .It Sy zfs_remove_max_segment Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq uint The largest contiguous segment that we will attempt to allocate when removing a device. If there is a performance problem with attempting to allocate large blocks, consider decreasing this. The default value is also the maximum. . .It Sy zfs_resilver_disable_defer Ns = Ns Sy 0 Ns | Ns 1 Pq int Ignore the .Sy resilver_defer feature, causing an operation that would start a resilver to immediately restart the one in progress. . .It Sy zfs_resilver_min_time_ms Ns = Ns Sy 3000 Ns ms Po 3 s Pc Pq uint Resilvers are processed by the sync thread. While resilvering, it will spend at least this much time working on a resilver between TXG flushes. . .It Sy zfs_scan_ignore_errors Ns = Ns Sy 0 Ns | Ns 1 Pq int If set, remove the DTL (dirty time list) upon completion of a pool scan (scrub), even if there were unrepairable errors. Intended to be used during pool repair or recovery to stop resilvering when the pool is next imported. . .It Sy zfs_scrub_after_expand Ns = Ns Sy 1 Ns | Ns 0 Pq int Automatically start a pool scrub after a RAIDZ expansion completes in order to verify the checksums of all blocks which have been copied during the expansion. This is enabled by default and strongly recommended. . .It Sy zfs_scrub_min_time_ms Ns = Ns Sy 1000 Ns ms Po 1 s Pc Pq uint Scrubs are processed by the sync thread. While scrubbing, it will spend at least this much time working on a scrub between TXG flushes. . .It Sy zfs_scrub_error_blocks_per_txg Ns = Ns Sy 4096 Pq uint Error blocks to be scrubbed in one txg. . .It Sy zfs_scan_checkpoint_intval Ns = Ns Sy 7200 Ns s Po 2 hour Pc Pq uint To preserve progress across reboots, the sequential scan algorithm periodically needs to stop metadata scanning and issue all the verification I/O to disk. The frequency of this flushing is determined by this tunable. . .It Sy zfs_scan_fill_weight Ns = Ns Sy 3 Pq uint This tunable affects how scrub and resilver I/O segments are ordered. A higher number indicates that we care more about how filled in a segment is, while a lower number indicates we care more about the size of the extent without considering the gaps within a segment. This value is only tunable upon module insertion. Changing the value afterwards will have no effect on scrub or resilver performance. . .It Sy zfs_scan_issue_strategy Ns = Ns Sy 0 Pq uint Determines the order that data will be verified while scrubbing or resilvering: .Bl -tag -compact -offset 4n -width "a" .It Sy 1 Data will be verified as sequentially as possible, given the amount of memory reserved for scrubbing .Pq see Sy zfs_scan_mem_lim_fact . This may improve scrub performance if the pool's data is very fragmented. .It Sy 2 The largest mostly-contiguous chunk of found data will be verified first. By deferring scrubbing of small segments, we may later find adjacent data to coalesce and increase the segment size. .It Sy 0 .No Use strategy Sy 1 No during normal verification .No and strategy Sy 2 No while taking a checkpoint . .El . .It Sy zfs_scan_legacy Ns = Ns Sy 0 Ns | Ns 1 Pq int If unset, indicates that scrubs and resilvers will gather metadata in memory before issuing sequential I/O. Otherwise indicates that the legacy algorithm will be used, where I/O is initiated as soon as it is discovered. Unsetting will not affect scrubs or resilvers that are already in progress. . .It Sy zfs_scan_max_ext_gap Ns = Ns Sy 2097152 Ns B Po 2 MiB Pc Pq int Sets the largest gap in bytes between scrub/resilver I/O operations that will still be considered sequential for sorting purposes. Changing this value will not affect scrubs or resilvers that are already in progress. . .It Sy zfs_scan_mem_lim_fact Ns = Ns Sy 20 Ns ^-1 Pq uint Maximum fraction of RAM used for I/O sorting by sequential scan algorithm. This tunable determines the hard limit for I/O sorting memory usage. When the hard limit is reached we stop scanning metadata and start issuing data verification I/O. This is done until we get below the soft limit. . .It Sy zfs_scan_mem_lim_soft_fact Ns = Ns Sy 20 Ns ^-1 Pq uint The fraction of the hard limit used to determined the soft limit for I/O sorting by the sequential scan algorithm. When we cross this limit from below no action is taken. When we cross this limit from above it is because we are issuing verification I/O. In this case (unless the metadata scan is done) we stop issuing verification I/O and start scanning metadata again until we get to the hard limit. . .It Sy zfs_scan_report_txgs Ns = Ns Sy 0 Ns | Ns 1 Pq uint When reporting resilver throughput and estimated completion time use the performance observed over roughly the last .Sy zfs_scan_report_txgs TXGs. When set to zero performance is calculated over the time between checkpoints. . .It Sy zfs_scan_strict_mem_lim Ns = Ns Sy 0 Ns | Ns 1 Pq int Enforce tight memory limits on pool scans when a sequential scan is in progress. When disabled, the memory limit may be exceeded by fast disks. . .It Sy zfs_scan_suspend_progress Ns = Ns Sy 0 Ns | Ns 1 Pq int Freezes a scrub/resilver in progress without actually pausing it. Intended for testing/debugging. . .It Sy zfs_scan_vdev_limit Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq int Maximum amount of data that can be concurrently issued at once for scrubs and resilvers per leaf device, given in bytes. . .It Sy zfs_send_corrupt_data Ns = Ns Sy 0 Ns | Ns 1 Pq int Allow sending of corrupt data (ignore read/checksum errors when sending). . .It Sy zfs_send_unmodified_spill_blocks Ns = Ns Sy 1 Ns | Ns 0 Pq int Include unmodified spill blocks in the send stream. Under certain circumstances, previous versions of ZFS could incorrectly remove the spill block from an existing object. Including unmodified copies of the spill blocks creates a backwards-compatible stream which will recreate a spill block if it was incorrectly removed. . .It Sy zfs_send_no_prefetch_queue_ff Ns = Ns Sy 20 Ns ^\-1 Pq uint The fill fraction of the .Nm zfs Cm send internal queues. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_send_no_prefetch_queue_length Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq uint The maximum number of bytes allowed in .Nm zfs Cm send Ns 's internal queues. . .It Sy zfs_send_queue_ff Ns = Ns Sy 20 Ns ^\-1 Pq uint The fill fraction of the .Nm zfs Cm send prefetch queue. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_send_queue_length Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq uint The maximum number of bytes allowed that will be prefetched by .Nm zfs Cm send . This value must be at least twice the maximum block size in use. . .It Sy zfs_recv_queue_ff Ns = Ns Sy 20 Ns ^\-1 Pq uint The fill fraction of the .Nm zfs Cm receive queue. The fill fraction controls the timing with which internal threads are woken up. . .It Sy zfs_recv_queue_length Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq uint The maximum number of bytes allowed in the .Nm zfs Cm receive queue. This value must be at least twice the maximum block size in use. . .It Sy zfs_recv_write_batch_size Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq uint The maximum amount of data, in bytes, that .Nm zfs Cm receive will write in one DMU transaction. This is the uncompressed size, even when receiving a compressed send stream. This setting will not reduce the write size below a single block. Capped at a maximum of .Sy 32 MiB . . .It Sy zfs_recv_best_effort_corrective Ns = Ns Sy 0 Pq int When this variable is set to non-zero a corrective receive: .Bl -enum -compact -offset 4n -width "1." .It Does not enforce the restriction of source & destination snapshot GUIDs matching. .It If there is an error during healing, the healing receive is not terminated instead it moves on to the next record. .El . .It Sy zfs_override_estimate_recordsize Ns = Ns Sy 0 Ns | Ns 1 Pq uint Setting this variable overrides the default logic for estimating block sizes when doing a .Nm zfs Cm send . The default heuristic is that the average block size will be the current recordsize. Override this value if most data in your dataset is not of that size and you require accurate zfs send size estimates. . .It Sy zfs_sync_pass_deferred_free Ns = Ns Sy 2 Pq uint Flushing of data to disk is done in passes. Defer frees starting in this pass. . .It Sy zfs_spa_discard_memory_limit Ns = Ns Sy 16777216 Ns B Po 16 MiB Pc Pq int Maximum memory used for prefetching a checkpoint's space map on each vdev while discarding the checkpoint. . .It Sy zfs_special_class_metadata_reserve_pct Ns = Ns Sy 25 Ns % Pq uint Only allow small data blocks to be allocated on the special and dedup vdev types when the available free space percentage on these vdevs exceeds this value. This ensures reserved space is available for pool metadata as the special vdevs approach capacity. . .It Sy zfs_sync_pass_dont_compress Ns = Ns Sy 8 Pq uint Starting in this sync pass, disable compression (including of metadata). With the default setting, in practice, we don't have this many sync passes, so this has no effect. .Pp The original intent was that disabling compression would help the sync passes to converge. However, in practice, disabling compression increases the average number of sync passes; because when we turn compression off, many blocks' size will change, and thus we have to re-allocate (not overwrite) them. It also increases the number of .Em 128 KiB allocations (e.g. for indirect blocks and spacemaps) because these will not be compressed. The .Em 128 KiB allocations are especially detrimental to performance on highly fragmented systems, which may have very few free segments of this size, and may need to load new metaslabs to satisfy these allocations. . .It Sy zfs_sync_pass_rewrite Ns = Ns Sy 2 Pq uint Rewrite new block pointers starting in this pass. . .It Sy zfs_trim_extent_bytes_max Ns = Ns Sy 134217728 Ns B Po 128 MiB Pc Pq uint Maximum size of TRIM command. Larger ranges will be split into chunks no larger than this value before issuing. . .It Sy zfs_trim_extent_bytes_min Ns = Ns Sy 32768 Ns B Po 32 KiB Pc Pq uint Minimum size of TRIM commands. TRIM ranges smaller than this will be skipped, unless they're part of a larger range which was chunked. This is done because it's common for these small TRIMs to negatively impact overall performance. . .It Sy zfs_trim_metaslab_skip Ns = Ns Sy 0 Ns | Ns 1 Pq uint Skip uninitialized metaslabs during the TRIM process. This option is useful for pools constructed from large thinly-provisioned devices where TRIM operations are slow. As a pool ages, an increasing fraction of the pool's metaslabs will be initialized, progressively degrading the usefulness of this option. This setting is stored when starting a manual TRIM and will persist for the duration of the requested TRIM. . .It Sy zfs_trim_queue_limit Ns = Ns Sy 10 Pq uint Maximum number of queued TRIMs outstanding per leaf vdev. The number of concurrent TRIM commands issued to the device is controlled by .Sy zfs_vdev_trim_min_active No and Sy zfs_vdev_trim_max_active . . .It Sy zfs_trim_txg_batch Ns = Ns Sy 32 Pq uint The number of transaction groups' worth of frees which should be aggregated before TRIM operations are issued to the device. This setting represents a trade-off between issuing larger, more efficient TRIM operations and the delay before the recently trimmed space is available for use by the device. .Pp Increasing this value will allow frees to be aggregated for a longer time. This will result is larger TRIM operations and potentially increased memory usage. Decreasing this value will have the opposite effect. The default of .Sy 32 was determined to be a reasonable compromise. . .It Sy zfs_txg_history Ns = Ns Sy 100 Pq uint Historical statistics for this many latest TXGs will be available in .Pa /proc/spl/kstat/zfs/ Ns Ao Ar pool Ac Ns Pa /TXGs . . .It Sy zfs_txg_timeout Ns = Ns Sy 5 Ns s Pq uint Flush dirty data to disk at least every this many seconds (maximum TXG duration). . .It Sy zfs_vdev_aggregation_limit Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq uint Max vdev I/O aggregation size. . .It Sy zfs_vdev_aggregation_limit_non_rotating Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq uint Max vdev I/O aggregation size for non-rotating media. . .It Sy zfs_vdev_mirror_rotating_inc Ns = Ns Sy 0 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation immediately follows its predecessor on rotational vdevs for the purpose of making decisions based on load. . .It Sy zfs_vdev_mirror_rotating_seek_inc Ns = Ns Sy 5 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation lacks locality as defined by .Sy zfs_vdev_mirror_rotating_seek_offset . Operations within this that are not immediately following the previous operation are incremented by half. . .It Sy zfs_vdev_mirror_rotating_seek_offset Ns = Ns Sy 1048576 Ns B Po 1 MiB Pc Pq int The maximum distance for the last queued I/O operation in which the balancing algorithm considers an operation to have locality. .No See Sx ZFS I/O SCHEDULER . . .It Sy zfs_vdev_mirror_non_rotating_inc Ns = Ns Sy 0 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member on non-rotational vdevs when I/O operations do not immediately follow one another. . .It Sy zfs_vdev_mirror_non_rotating_seek_inc Ns = Ns Sy 1 Pq int A number by which the balancing algorithm increments the load calculation for the purpose of selecting the least busy mirror member when an I/O operation lacks locality as defined by the .Sy zfs_vdev_mirror_rotating_seek_offset . Operations within this that are not immediately following the previous operation are incremented by half. . .It Sy zfs_vdev_read_gap_limit Ns = Ns Sy 32768 Ns B Po 32 KiB Pc Pq uint Aggregate read I/O operations if the on-disk gap between them is within this threshold. . .It Sy zfs_vdev_write_gap_limit Ns = Ns Sy 4096 Ns B Po 4 KiB Pc Pq uint Aggregate write I/O operations if the on-disk gap between them is within this threshold. . .It Sy zfs_vdev_raidz_impl Ns = Ns Sy fastest Pq string Select the raidz parity implementation to use. .Pp Variants that don't depend on CPU-specific features may be selected on module load, as they are supported on all systems. The remaining options may only be set after the module is loaded, as they are available only if the implementations are compiled in and supported on the running system. .Pp Once the module is loaded, .Pa /sys/module/zfs/parameters/zfs_vdev_raidz_impl will show the available options, with the currently selected one enclosed in square brackets. .Pp .TS lb l l . fastest selected by built-in benchmark original original implementation scalar scalar implementation sse2 SSE2 instruction set 64-bit x86 ssse3 SSSE3 instruction set 64-bit x86 avx2 AVX2 instruction set 64-bit x86 avx512f AVX512F instruction set 64-bit x86 avx512bw AVX512F & AVX512BW instruction sets 64-bit x86 aarch64_neon NEON Aarch64/64-bit ARMv8 aarch64_neonx2 NEON with more unrolling Aarch64/64-bit ARMv8 powerpc_altivec Altivec PowerPC .TE . .It Sy zfs_vdev_scheduler Pq charp .Sy DEPRECATED . Prints warning to kernel log for compatibility. . .It Sy zfs_zevent_len_max Ns = Ns Sy 512 Pq uint Max event queue length. Events in the queue can be viewed with .Xr zpool-events 8 . . .It Sy zfs_zevent_retain_max Ns = Ns Sy 2000 Pq int Maximum recent zevent records to retain for duplicate checking. Setting this to .Sy 0 disables duplicate detection. . .It Sy zfs_zevent_retain_expire_secs Ns = Ns Sy 900 Ns s Po 15 min Pc Pq int Lifespan for a recent ereport that was retained for duplicate checking. . .It Sy zfs_zil_clean_taskq_maxalloc Ns = Ns Sy 1048576 Pq int The maximum number of taskq entries that are allowed to be cached. When this limit is exceeded transaction records (itxs) will be cleaned synchronously. . .It Sy zfs_zil_clean_taskq_minalloc Ns = Ns Sy 1024 Pq int The number of taskq entries that are pre-populated when the taskq is first created and are immediately available for use. . .It Sy zfs_zil_clean_taskq_nthr_pct Ns = Ns Sy 100 Ns % Pq int This controls the number of threads used by .Sy dp_zil_clean_taskq . The default value of .Sy 100% will create a maximum of one thread per cpu. . .It Sy zil_maxblocksize Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq uint This sets the maximum block size used by the ZIL. On very fragmented pools, lowering this .Pq typically to Sy 36 KiB can improve performance. . .It Sy zil_maxcopied Ns = Ns Sy 7680 Ns B Po 7.5 KiB Pc Pq uint This sets the maximum number of write bytes logged via WR_COPIED. It tunes a tradeoff between additional memory copy and possibly worse log space efficiency vs additional range lock/unlock. . .It Sy zil_nocacheflush Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable the cache flush commands that are normally sent to disk by the ZIL after an LWB write has completed. Setting this will cause ZIL corruption on power loss if a volatile out-of-order write cache is enabled. . .It Sy zil_replay_disable Ns = Ns Sy 0 Ns | Ns 1 Pq int Disable intent logging replay. Can be disabled for recovery from corrupted ZIL. . .It Sy zil_slog_bulk Ns = Ns Sy 67108864 Ns B Po 64 MiB Pc Pq u64 Limit SLOG write size per commit executed with synchronous priority. Any writes above that will be executed with lower (asynchronous) priority to limit potential SLOG device abuse by single active ZIL writer. . .It Sy zfs_zil_saxattr Ns = Ns Sy 1 Ns | Ns 0 Pq int Setting this tunable to zero disables ZIL logging of new .Sy xattr Ns = Ns Sy sa records if the .Sy org.openzfs:zilsaxattr feature is enabled on the pool. This would only be necessary to work around bugs in the ZIL logging or replay code for this record type. The tunable has no effect if the feature is disabled. . .It Sy zfs_embedded_slog_min_ms Ns = Ns Sy 64 Pq uint Usually, one metaslab from each normal-class vdev is dedicated for use by the ZIL to log synchronous writes. However, if there are fewer than .Sy zfs_embedded_slog_min_ms metaslabs in the vdev, this functionality is disabled. This ensures that we don't set aside an unreasonable amount of space for the ZIL. . .It Sy zstd_earlyabort_pass Ns = Ns Sy 1 Pq uint Whether heuristic for detection of incompressible data with zstd levels >= 3 using LZ4 and zstd-1 passes is enabled. . .It Sy zstd_abort_size Ns = Ns Sy 131072 Pq uint Minimal uncompressed size (inclusive) of a record before the early abort heuristic will be attempted. . .It Sy zio_deadman_log_all Ns = Ns Sy 0 Ns | Ns 1 Pq int If non-zero, the zio deadman will produce debugging messages .Pq see Sy zfs_dbgmsg_enable for all zios, rather than only for leaf zios possessing a vdev. This is meant to be used by developers to gain diagnostic information for hang conditions which don't involve a mutex or other locking primitive: typically conditions in which a thread in the zio pipeline is looping indefinitely. . .It Sy zio_slow_io_ms Ns = Ns Sy 30000 Ns ms Po 30 s Pc Pq int When an I/O operation takes more than this much time to complete, it's marked as slow. Each slow operation causes a delay zevent. Slow I/O counters can be seen with .Nm zpool Cm status Fl s . . .It Sy zio_dva_throttle_enabled Ns = Ns Sy 1 Ns | Ns 0 Pq int Throttle block allocations in the I/O pipeline. This allows for dynamic allocation distribution when devices are imbalanced. When enabled, the maximum number of pending allocations per top-level vdev is limited by .Sy zfs_vdev_queue_depth_pct . . .It Sy zfs_xattr_compat Ns = Ns 0 Ns | Ns 1 Pq int Control the naming scheme used when setting new xattrs in the user namespace. If .Sy 0 .Pq the default on Linux , user namespace xattr names are prefixed with the namespace, to be backwards compatible with previous versions of ZFS on Linux. If .Sy 1 .Pq the default on Fx , user namespace xattr names are not prefixed, to be backwards compatible with previous versions of ZFS on illumos and .Fx . .Pp Either naming scheme can be read on this and future versions of ZFS, regardless of this tunable, but legacy ZFS on illumos or .Fx are unable to read user namespace xattrs written in the Linux format, and legacy versions of ZFS on Linux are unable to read user namespace xattrs written in the legacy ZFS format. .Pp An existing xattr with the alternate naming scheme is removed when overwriting the xattr so as to not accumulate duplicates. . .It Sy zio_requeue_io_start_cut_in_line Ns = Ns Sy 0 Ns | Ns 1 Pq int Prioritize requeued I/O. . .It Sy zio_taskq_batch_pct Ns = Ns Sy 80 Ns % Pq uint Percentage of online CPUs which will run a worker thread for I/O. These workers are responsible for I/O work such as compression, encryption, checksum and parity calculations. Fractional number of CPUs will be rounded down. .Pp The default value of .Sy 80% was chosen to avoid using all CPUs which can result in latency issues and inconsistent application performance, especially when slower compression and/or checksumming is enabled. Set value only applies to pools imported/created after that. . .It Sy zio_taskq_batch_tpq Ns = Ns Sy 0 Pq uint Number of worker threads per taskq. Higher values improve I/O ordering and CPU utilization, while lower reduce lock contention. Set value only applies to pools imported/created after that. .Pp If .Sy 0 , generate a system-dependent value close to 6 threads per taskq. Set value only applies to pools imported/created after that. . .It Sy zio_taskq_write_tpq Ns = Ns Sy 16 Pq uint Determines the minumum number of threads per write issue taskq. Higher values improve CPU utilization on high throughput, while lower reduce taskq locks contention on high IOPS. Set value only applies to pools imported/created after that. . .It Sy zio_taskq_read Ns = Ns Sy fixed,1,8 null scale null Pq charp Set the queue and thread configuration for the IO read queues. This is an advanced debugging parameter. Don't change this unless you understand what it does. Set values only apply to pools imported/created after that. . .It Sy zio_taskq_write Ns = Ns Sy sync null scale null Pq charp Set the queue and thread configuration for the IO write queues. This is an advanced debugging parameter. Don't change this unless you understand what it does. Set values only apply to pools imported/created after that. . .It Sy zvol_inhibit_dev Ns = Ns Sy 0 Ns | Ns 1 Pq uint Do not create zvol device nodes. This may slightly improve startup time on systems with a very large number of zvols. . .It Sy zvol_major Ns = Ns Sy 230 Pq uint Major number for zvol block devices. . .It Sy zvol_max_discard_blocks Ns = Ns Sy 16384 Pq long Discard (TRIM) operations done on zvols will be done in batches of this many blocks, where block size is determined by the .Sy volblocksize property of a zvol. . .It Sy zvol_prefetch_bytes Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq uint When adding a zvol to the system, prefetch this many bytes from the start and end of the volume. Prefetching these regions of the volume is desirable, because they are likely to be accessed immediately by .Xr blkid 8 or the kernel partitioner. . .It Sy zvol_request_sync Ns = Ns Sy 0 Ns | Ns 1 Pq uint When processing I/O requests for a zvol, submit them synchronously. This effectively limits the queue depth to .Em 1 for each I/O submitter. When unset, requests are handled asynchronously by a thread pool. The number of requests which can be handled concurrently is controlled by .Sy zvol_threads . .Sy zvol_request_sync is ignored when running on a kernel that supports block multiqueue .Pq Li blk-mq . . .It Sy zvol_num_taskqs Ns = Ns Sy 0 Pq uint Number of zvol taskqs. If .Sy 0 (the default) then scaling is done internally to prefer 6 threads per taskq. This only applies on Linux. . .It Sy zvol_threads Ns = Ns Sy 0 Pq uint The number of system wide threads to use for processing zvol block IOs. If .Sy 0 (the default) then internally set .Sy zvol_threads to the number of CPUs present or 32 (whichever is greater). . .It Sy zvol_blk_mq_threads Ns = Ns Sy 0 Pq uint The number of threads per zvol to use for queuing IO requests. This parameter will only appear if your kernel supports .Li blk-mq and is only read and assigned to a zvol at zvol load time. If .Sy 0 (the default) then internally set .Sy zvol_blk_mq_threads to the number of CPUs present. . .It Sy zvol_use_blk_mq Ns = Ns Sy 0 Ns | Ns 1 Pq uint Set to .Sy 1 to use the .Li blk-mq API for zvols. Set to .Sy 0 (the default) to use the legacy zvol APIs. This setting can give better or worse zvol performance depending on the workload. This parameter will only appear if your kernel supports .Li blk-mq and is only read and assigned to a zvol at zvol load time. . .It Sy zvol_blk_mq_blocks_per_thread Ns = Ns Sy 8 Pq uint If .Sy zvol_use_blk_mq is enabled, then process this number of .Sy volblocksize Ns -sized blocks per zvol thread. This tunable can be use to favor better performance for zvol reads (lower values) or writes (higher values). If set to .Sy 0 , then the zvol layer will process the maximum number of blocks per thread that it can. This parameter will only appear if your kernel supports .Li blk-mq and is only applied at each zvol's load time. . .It Sy zvol_blk_mq_queue_depth Ns = Ns Sy 0 Pq uint The queue_depth value for the zvol .Li blk-mq interface. This parameter will only appear if your kernel supports .Li blk-mq and is only applied at each zvol's load time. If .Sy 0 (the default) then use the kernel's default queue depth. Values are clamped to the kernel's .Dv BLKDEV_MIN_RQ and .Dv BLKDEV_MAX_RQ Ns / Ns Dv BLKDEV_DEFAULT_RQ limits. . .It Sy zvol_volmode Ns = Ns Sy 1 Pq uint Defines zvol block devices behaviour when .Sy volmode Ns = Ns Sy default : .Bl -tag -compact -offset 4n -width "a" .It Sy 1 .No equivalent to Sy full .It Sy 2 .No equivalent to Sy dev .It Sy 3 .No equivalent to Sy none .El . .It Sy zvol_enforce_quotas Ns = Ns Sy 0 Ns | Ns 1 Pq uint Enable strict ZVOL quota enforcement. The strict quota enforcement may have a performance impact. .El . .Sh ZFS I/O SCHEDULER ZFS issues I/O operations to leaf vdevs to satisfy and complete I/O operations. The scheduler determines when and in what order those operations are issued. The scheduler divides operations into five I/O classes, prioritized in the following order: sync read, sync write, async read, async write, and scrub/resilver. Each queue defines the minimum and maximum number of concurrent operations that may be issued to the device. In addition, the device has an aggregate maximum, .Sy zfs_vdev_max_active . Note that the sum of the per-queue minima must not exceed the aggregate maximum. If the sum of the per-queue maxima exceeds the aggregate maximum, then the number of active operations may reach .Sy zfs_vdev_max_active , in which case no further operations will be issued, regardless of whether all per-queue minima have been met. .Pp For many physical devices, throughput increases with the number of concurrent operations, but latency typically suffers. Furthermore, physical devices typically have a limit at which more concurrent operations have no effect on throughput or can actually cause it to decrease. .Pp The scheduler selects the next operation to issue by first looking for an I/O class whose minimum has not been satisfied. Once all are satisfied and the aggregate maximum has not been hit, the scheduler looks for classes whose maximum has not been satisfied. Iteration through the I/O classes is done in the order specified above. No further operations are issued if the aggregate maximum number of concurrent operations has been hit, or if there are no operations queued for an I/O class that has not hit its maximum. Every time an I/O operation is queued or an operation completes, the scheduler looks for new operations to issue. .Pp In general, smaller .Sy max_active Ns s will lead to lower latency of synchronous operations. Larger .Sy max_active Ns s may lead to higher overall throughput, depending on underlying storage. .Pp The ratio of the queues' .Sy max_active Ns s determines the balance of performance between reads, writes, and scrubs. For example, increasing .Sy zfs_vdev_scrub_max_active will cause the scrub or resilver to complete more quickly, but reads and writes to have higher latency and lower throughput. .Pp All I/O classes have a fixed maximum number of outstanding operations, except for the async write class. Asynchronous writes represent the data that is committed to stable storage during the syncing stage for transaction groups. Transaction groups enter the syncing state periodically, so the number of queued async writes will quickly burst up and then bleed down to zero. Rather than servicing them as quickly as possible, the I/O scheduler changes the maximum number of active async write operations according to the amount of dirty data in the pool. Since both throughput and latency typically increase with the number of concurrent operations issued to physical devices, reducing the burstiness in the number of simultaneous operations also stabilizes the response time of operations from other queues, in particular synchronous ones. In broad strokes, the I/O scheduler will issue more concurrent operations from the async write queue as there is more dirty data in the pool. . .Ss Async Writes The number of concurrent operations issued for the async write I/O class follows a piece-wise linear function defined by a few adjustable points: .Bd -literal | o---------| <-- \fBzfs_vdev_async_write_max_active\fP ^ | /^ | | | / | | active | / | | I/O | / | | count | / | | | / | | |-------o | | <-- \fBzfs_vdev_async_write_min_active\fP 0|_______^______|_________| 0% | | 100% of \fBzfs_dirty_data_max\fP | | | `-- \fBzfs_vdev_async_write_active_max_dirty_percent\fP `--------- \fBzfs_vdev_async_write_active_min_dirty_percent\fP .Ed .Pp Until the amount of dirty data exceeds a minimum percentage of the dirty data allowed in the pool, the I/O scheduler will limit the number of concurrent operations to the minimum. As that threshold is crossed, the number of concurrent operations issued increases linearly to the maximum at the specified maximum percentage of the dirty data allowed in the pool. .Pp Ideally, the amount of dirty data on a busy pool will stay in the sloped part of the function between .Sy zfs_vdev_async_write_active_min_dirty_percent and .Sy zfs_vdev_async_write_active_max_dirty_percent . If it exceeds the maximum percentage, this indicates that the rate of incoming data is greater than the rate that the backend storage can handle. In this case, we must further throttle incoming writes, as described in the next section. . .Sh ZFS TRANSACTION DELAY We delay transactions when we've determined that the backend storage isn't able to accommodate the rate of incoming writes. .Pp If there is already a transaction waiting, we delay relative to when that transaction will finish waiting. This way the calculated delay time is independent of the number of threads concurrently executing transactions. .Pp If we are the only waiter, wait relative to when the transaction started, rather than the current time. This credits the transaction for "time already served", e.g. reading indirect blocks. .Pp The minimum time for a transaction to take is calculated as .D1 min_time = min( Ns Sy zfs_delay_scale No \(mu Po Sy dirty No \- Sy min Pc / Po Sy max No \- Sy dirty Pc , 100ms) .Pp The delay has two degrees of freedom that can be adjusted via tunables. The percentage of dirty data at which we start to delay is defined by .Sy zfs_delay_min_dirty_percent . This should typically be at or above .Sy zfs_vdev_async_write_active_max_dirty_percent , so that we only start to delay after writing at full speed has failed to keep up with the incoming write rate. The scale of the curve is defined by .Sy zfs_delay_scale . Roughly speaking, this variable determines the amount of delay at the midpoint of the curve. .Bd -literal delay 10ms +-------------------------------------------------------------*+ | *| 9ms + *+ | *| 8ms + *+ | * | 7ms + * + | * | 6ms + * + | * | 5ms + * + | * | 4ms + * + | * | 3ms + * + | * | 2ms + (midpoint) * + | | ** | 1ms + v *** + | \fBzfs_delay_scale\fP ----------> ******** | 0 +-------------------------------------*********----------------+ 0% <- \fBzfs_dirty_data_max\fP -> 100% .Ed .Pp Note, that since the delay is added to the outstanding time remaining on the most recent transaction it's effectively the inverse of IOPS. Here, the midpoint of .Em 500 us translates to .Em 2000 IOPS . The shape of the curve was chosen such that small changes in the amount of accumulated dirty data in the first three quarters of the curve yield relatively small differences in the amount of delay. .Pp The effects can be easier to understand when the amount of delay is represented on a logarithmic scale: .Bd -literal delay 100ms +-------------------------------------------------------------++ + + | | + *+ 10ms + *+ + ** + | (midpoint) ** | + | ** + 1ms + v **** + + \fBzfs_delay_scale\fP ----------> ***** + | **** | + **** + 100us + ** + + * + | * | + * + 10us + * + + + | | + + +--------------------------------------------------------------+ 0% <- \fBzfs_dirty_data_max\fP -> 100% .Ed .Pp Note here that only as the amount of dirty data approaches its limit does the delay start to increase rapidly. The goal of a properly tuned system should be to keep the amount of dirty data out of that range by first ensuring that the appropriate limits are set for the I/O scheduler to reach optimal throughput on the back-end storage, and then by changing the value of .Sy zfs_delay_scale to increase the steepness of the curve. diff --git a/module/os/freebsd/zfs/arc_os.c b/module/os/freebsd/zfs/arc_os.c index e271d3bf98a0..f52c7bb5af8b 100644 --- a/module/os/freebsd/zfs/arc_os.c +++ b/module/os/freebsd/zfs/arc_os.c @@ -1,196 +1,195 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern struct vfsops zfs_vfsops; uint_t zfs_arc_free_target = 0; static void arc_free_target_init(void *unused __unused) { zfs_arc_free_target = vm_cnt.v_free_target; } SYSINIT(arc_free_target_init, SI_SUB_KTHREAD_PAGE, SI_ORDER_ANY, arc_free_target_init, NULL); /* * We don't have a tunable for arc_free_target due to the dependency on * pagedaemon initialisation. */ ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, free_target, param_set_arc_free_target, 0, CTLFLAG_RW, "Desired number of free pages below which ARC triggers reclaim"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, no_grow_shift, param_set_arc_no_grow_shift, 0, ZMOD_RW, "log2(fraction of ARC which must be free to allow growing)"); int64_t arc_available_memory(void) { int64_t lowest = INT64_MAX; int64_t n __unused; /* * Cooperate with pagedaemon when it's time for it to scan * and reclaim some pages. */ n = PAGESIZE * ((int64_t)freemem - zfs_arc_free_target); if (n < lowest) { lowest = n; } #if !defined(UMA_MD_SMALL_ALLOC) && !defined(UMA_USE_DMAP) /* * If we're on a platform without a direct map, it's possible that we'll * exhaust the kernel heap space before we ever run out of available * physical memory. Most checks of the size of the heap_area compare * against tune.t_minarmem, which is the minimum available real memory * that we can have in the system. However, this is generally fixed at * 25 pages which is so low that it's useless. In this comparison, we * seek to calculate the total heap-size, and reclaim if more than * 3/4ths of the heap is allocated. (Or, in the calculation, if less * than 1/4th is free) */ n = uma_avail() - (long)(uma_limit() / 4); if (n < lowest) { lowest = n; } #endif DTRACE_PROBE1(arc__available_memory, int64_t, lowest); return (lowest); } /* * Return a default max arc size based on the amount of physical memory. */ uint64_t arc_default_max(uint64_t min, uint64_t allmem) { uint64_t size; if (allmem >= 1 << 30) size = allmem - (1 << 30); else size = min; return (MAX(allmem * 5 / 8, size)); } uint64_t arc_all_memory(void) { return (ptob(physmem)); } int arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg) { return (0); } uint64_t arc_free_memory(void) { return (ptob(freemem)); } static eventhandler_tag arc_event_lowmem = NULL; static void arc_lowmem(void *arg __unused, int howto __unused) { - int64_t free_memory, to_free; + int64_t can_free, free_memory, to_free; arc_no_grow = B_TRUE; arc_warm = B_TRUE; arc_growtime = gethrtime() + SEC2NSEC(arc_grow_retry); + free_memory = arc_available_memory(); - int64_t can_free = arc_c - arc_c_min; - if (can_free <= 0) - return; - to_free = (can_free >> arc_shrink_shift) - MIN(free_memory, 0); + can_free = arc_c - arc_c_min; + to_free = (MAX(can_free, 0) >> arc_shrink_shift) - MIN(free_memory, 0); DTRACE_PROBE2(arc__needfree, int64_t, free_memory, int64_t, to_free); - arc_reduce_target_size(to_free); + to_free = arc_reduce_target_size(to_free); /* * It is unsafe to block here in arbitrary threads, because we can come * here from ARC itself and may hold ARC locks and thus risk a deadlock * with ARC reclaim thread. */ if (curproc == pageproc) - arc_wait_for_eviction(to_free, B_FALSE); + arc_wait_for_eviction(to_free, B_FALSE, B_FALSE); } void arc_lowmem_init(void) { arc_event_lowmem = EVENTHANDLER_REGISTER(vm_lowmem, arc_lowmem, NULL, EVENTHANDLER_PRI_FIRST); } void arc_lowmem_fini(void) { if (arc_event_lowmem != NULL) EVENTHANDLER_DEREGISTER(vm_lowmem, arc_event_lowmem); } void arc_register_hotplug(void) { } void arc_unregister_hotplug(void) { } diff --git a/module/os/linux/zfs/arc_os.c b/module/os/linux/zfs/arc_os.c index 02dd80c06062..75a9ea53225e 100644 --- a/module/os/linux/zfs/arc_os.c +++ b/module/os/linux/zfs/arc_os.c @@ -1,502 +1,508 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2018, Joyent, Inc. * Copyright (c) 2011, 2019 by Delphix. All rights reserved. * Copyright (c) 2014 by Saso Kiselkov. All rights reserved. * Copyright 2017 Nexenta Systems, Inc. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef _KERNEL #include #include #include #include #include #include +#include #endif #include #include #include #include #include #include #include +#ifdef _KERNEL /* * This is a limit on how many pages the ARC shrinker makes available for * eviction in response to one page allocation attempt. Note that in * practice, the kernel's shrinker can ask us to evict up to about 4x this * for one allocation attempt. * * The default limit of 10,000 (in practice, 160MB per allocation attempt * with 4K pages) limits the amount of time spent attempting to reclaim ARC * memory to less than 100ms per allocation attempt, even with a small * average compressed block size of ~8KB. * * See also the comment in arc_shrinker_count(). * Set to 0 to disable limit. */ -int zfs_arc_shrinker_limit = 10000; +static int zfs_arc_shrinker_limit = 10000; + +/* + * Relative cost of ARC eviction, AKA number of seeks needed to restore evicted + * page. Bigger values make ARC more precious and evictions smaller comparing + * to other kernel subsystems. Value of 4 means parity with page cache, + * according to my reading of kernel's do_shrink_slab() and other code. + */ +static int zfs_arc_shrinker_seeks = DEFAULT_SEEKS; #ifdef CONFIG_MEMORY_HOTPLUG static struct notifier_block arc_hotplug_callback_mem_nb; #endif +#endif /* * Return a default max arc size based on the amount of physical memory. * This may be overridden by tuning the zfs_arc_max module parameter. */ uint64_t arc_default_max(uint64_t min, uint64_t allmem) { uint64_t size; if (allmem >= 1 << 30) size = allmem - (1 << 30); else size = min; return (MAX(allmem * 5 / 8, size)); } #ifdef _KERNEL /* * Return maximum amount of memory that we could possibly use. Reduced * to half of all memory in user space which is primarily used for testing. */ uint64_t arc_all_memory(void) { #ifdef CONFIG_HIGHMEM return (ptob(zfs_totalram_pages - zfs_totalhigh_pages)); #else return (ptob(zfs_totalram_pages)); #endif /* CONFIG_HIGHMEM */ } /* * Return the amount of memory that is considered free. In user space * which is primarily used for testing we pretend that free memory ranges * from 0-20% of all memory. */ uint64_t arc_free_memory(void) { #ifdef CONFIG_HIGHMEM struct sysinfo si; si_meminfo(&si); return (ptob(si.freeram - si.freehigh)); #else return (ptob(nr_free_pages() + nr_inactive_file_pages())); #endif /* CONFIG_HIGHMEM */ } /* * Return the amount of memory that can be consumed before reclaim will be * needed. Positive if there is sufficient free memory, negative indicates * the amount of memory that needs to be freed up. */ int64_t arc_available_memory(void) { return (arc_free_memory() - arc_sys_free); } static uint64_t arc_evictable_memory(void) { int64_t asize = aggsum_value(&arc_sums.arcstat_size); uint64_t arc_clean = zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_DATA]) + zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_METADATA]) + zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_DATA]) + zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]); uint64_t arc_dirty = MAX((int64_t)asize - (int64_t)arc_clean, 0); /* * Scale reported evictable memory in proportion to page cache, cap * at specified min/max. */ uint64_t min = (ptob(nr_file_pages()) / 100) * zfs_arc_pc_percent; min = MAX(arc_c_min, MIN(arc_c_max, min)); if (arc_dirty >= min) return (arc_clean); return (MAX((int64_t)asize - (int64_t)min, 0)); } /* * The _count() function returns the number of free-able objects. * The _scan() function returns the number of objects that were freed. */ static unsigned long arc_shrinker_count(struct shrinker *shrink, struct shrink_control *sc) { /* - * __GFP_FS won't be set if we are called from ZFS code (see - * kmem_flags_convert(), which removes it). To avoid a deadlock, we - * don't allow evicting in this case. We return 0 rather than - * SHRINK_STOP so that the shrinker logic doesn't accumulate a - * deficit against us. - */ - if (!(sc->gfp_mask & __GFP_FS)) { - return (0); - } - - /* - * This code is reached in the "direct reclaim" case, where the - * kernel (outside ZFS) is trying to allocate a page, and the system - * is low on memory. - * - * The kernel's shrinker code doesn't understand how many pages the + * The kernel's shrinker code may not understand how many pages the * ARC's callback actually frees, so it may ask the ARC to shrink a * lot for one page allocation. This is problematic because it may * take a long time, thus delaying the page allocation, and because * it may force the ARC to unnecessarily shrink very small. * * Therefore, we limit the amount of data that we say is evictable, * which limits the amount that the shrinker will ask us to evict for * one page allocation attempt. * * In practice, we may be asked to shrink 4x the limit to satisfy one * page allocation, before the kernel's shrinker code gives up on us. * When that happens, we rely on the kernel code to find the pages * that we freed before invoking the OOM killer. This happens in * __alloc_pages_slowpath(), which retries and finds the pages we * freed when it calls get_page_from_freelist(). * * See also the comment above zfs_arc_shrinker_limit. */ + int64_t can_free = btop(arc_evictable_memory()); int64_t limit = zfs_arc_shrinker_limit != 0 ? zfs_arc_shrinker_limit : INT64_MAX; - return (MIN(limit, btop((int64_t)arc_evictable_memory()))); + return (MIN(can_free, limit)); } static unsigned long arc_shrinker_scan(struct shrinker *shrink, struct shrink_control *sc) { - ASSERT((sc->gfp_mask & __GFP_FS) != 0); - /* The arc is considered warm once reclaim has occurred */ if (unlikely(arc_warm == B_FALSE)) arc_warm = B_TRUE; + /* + * We are experiencing memory pressure which the arc_evict_zthr was + * unable to keep up with. Set arc_no_grow to briefly pause ARC + * growth to avoid compounding the memory pressure. + */ + arc_no_grow = B_TRUE; + /* * Evict the requested number of pages by reducing arc_c and waiting - * for the requested amount of data to be evicted. + * for the requested amount of data to be evicted. To avoid deadlock + * do not wait for eviction if we may be called from ZFS itself (see + * kmem_flags_convert() removing __GFP_FS). It may cause excessive + * eviction later if many evictions are accumulated, but just skipping + * the eviction is not good either if most of memory is used by ARC. */ - arc_reduce_target_size(ptob(sc->nr_to_scan)); - arc_wait_for_eviction(ptob(sc->nr_to_scan), B_FALSE); + uint64_t to_free = arc_reduce_target_size(ptob(sc->nr_to_scan)); + if (sc->gfp_mask & __GFP_FS) + arc_wait_for_eviction(to_free, B_FALSE, B_FALSE); if (current->reclaim_state != NULL) #ifdef HAVE_RECLAIM_STATE_RECLAIMED - current->reclaim_state->reclaimed += sc->nr_to_scan; + current->reclaim_state->reclaimed += btop(to_free); #else - current->reclaim_state->reclaimed_slab += sc->nr_to_scan; + current->reclaim_state->reclaimed_slab += btop(to_free); #endif - /* - * We are experiencing memory pressure which the arc_evict_zthr was - * unable to keep up with. Set arc_no_grow to briefly pause arc - * growth to avoid compounding the memory pressure. - */ - arc_no_grow = B_TRUE; - /* * When direct reclaim is observed it usually indicates a rapid * increase in memory pressure. This occurs because the kswapd * threads were unable to asynchronously keep enough free memory * available. */ if (current_is_kswapd()) { ARCSTAT_BUMP(arcstat_memory_indirect_count); } else { ARCSTAT_BUMP(arcstat_memory_direct_count); } - return (sc->nr_to_scan); + return (btop(to_free)); } static struct shrinker *arc_shrinker = NULL; int arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg) { uint64_t free_memory = arc_free_memory(); if (free_memory > arc_all_memory() * arc_lotsfree_percent / 100) return (0); if (txg > spa->spa_lowmem_last_txg) { spa->spa_lowmem_last_txg = txg; spa->spa_lowmem_page_load = 0; } /* * If we are in pageout, we know that memory is already tight, * the arc is already going to be evicting, so we just want to * continue to let page writes occur as quickly as possible. */ if (current_is_kswapd()) { if (spa->spa_lowmem_page_load > MAX(arc_sys_free / 4, free_memory) / 4) { DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim); return (SET_ERROR(ERESTART)); } /* Note: reserve is inflated, so we deflate */ atomic_add_64(&spa->spa_lowmem_page_load, reserve / 8); return (0); } else if (spa->spa_lowmem_page_load > 0 && arc_reclaim_needed()) { /* memory is low, delay before restarting */ ARCSTAT_INCR(arcstat_memory_throttle_count, 1); DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim); return (SET_ERROR(EAGAIN)); } spa->spa_lowmem_page_load = 0; return (0); } static void arc_set_sys_free(uint64_t allmem) { /* * The ARC tries to keep at least this much memory available for the * system. This gives the ARC time to shrink in response to memory * pressure, before running completely out of memory and invoking the * direct-reclaim ARC shrinker. * * This should be more than twice high_wmark_pages(), so that * arc_wait_for_eviction() will wait until at least the * high_wmark_pages() are free (see arc_evict_state_impl()). * - * Note: Even when the system is very low on memory, the kernel's - * shrinker code may only ask for one "batch" of pages (512KB) to be - * evicted. If concurrent allocations consume these pages, there may + * Note: If concurrent allocations consume these pages, there may * still be insufficient free pages, and the OOM killer takes action. * * By setting arc_sys_free large enough, and having * arc_wait_for_eviction() wait until there is at least arc_sys_free/2 * free memory, it is much less likely that concurrent allocations can * consume all the memory that was evicted before checking for * OOM. * * It's hard to iterate the zones from a linux kernel module, which * makes it difficult to determine the watermark dynamically. Instead * we compute the maximum high watermark for this system, based - * on the amount of memory, assuming default parameters on Linux kernel - * 5.3. + * on the amount of memory, using the same method as the kernel uses + * to calculate its internal `min_free_kbytes` variable. See + * torvalds/linux@ee8eb9a5fe86 for the change in the upper clamp value + * from 64M to 256M. */ /* * Base wmark_low is 4 * the square root of Kbytes of RAM. */ - long wmark = 4 * int_sqrt(allmem/1024) * 1024; + long wmark = int_sqrt(allmem / 1024 * 16) * 1024; /* - * Clamp to between 128K and 64MB. + * Clamp to between 128K and 256/64MB. */ wmark = MAX(wmark, 128 * 1024); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 7, 0) + wmark = MIN(wmark, 256 * 1024 * 1024); +#else wmark = MIN(wmark, 64 * 1024 * 1024); +#endif /* * watermark_boost can increase the wmark by up to 150%. */ wmark += wmark * 150 / 100; /* * arc_sys_free needs to be more than 2x the watermark, because * arc_wait_for_eviction() waits for half of arc_sys_free. Bump this up * to 3x to ensure we're above it. */ arc_sys_free = wmark * 3 + allmem / 32; } void arc_lowmem_init(void) { uint64_t allmem = arc_all_memory(); /* * Register a shrinker to support synchronous (direct) memory * reclaim from the arc. This is done to prevent kswapd from * swapping out pages when it is preferable to shrink the arc. */ arc_shrinker = spl_register_shrinker("zfs-arc-shrinker", - arc_shrinker_count, arc_shrinker_scan, DEFAULT_SEEKS); + arc_shrinker_count, arc_shrinker_scan, zfs_arc_shrinker_seeks); VERIFY(arc_shrinker); arc_set_sys_free(allmem); } void arc_lowmem_fini(void) { spl_unregister_shrinker(arc_shrinker); arc_shrinker = NULL; } int param_set_arc_u64(const char *buf, zfs_kernel_param_t *kp) { int error; error = spl_param_set_u64(buf, kp); if (error < 0) return (SET_ERROR(error)); arc_tuning_update(B_TRUE); return (0); } int param_set_arc_min(const char *buf, zfs_kernel_param_t *kp) { return (param_set_arc_u64(buf, kp)); } int param_set_arc_max(const char *buf, zfs_kernel_param_t *kp) { return (param_set_arc_u64(buf, kp)); } int param_set_arc_int(const char *buf, zfs_kernel_param_t *kp) { int error; error = param_set_int(buf, kp); if (error < 0) return (SET_ERROR(error)); arc_tuning_update(B_TRUE); return (0); } #ifdef CONFIG_MEMORY_HOTPLUG static int arc_hotplug_callback(struct notifier_block *self, unsigned long action, void *arg) { (void) self, (void) arg; uint64_t allmem = arc_all_memory(); if (action != MEM_ONLINE) return (NOTIFY_OK); arc_set_limits(allmem); #ifdef __LP64__ if (zfs_dirty_data_max_max == 0) zfs_dirty_data_max_max = MIN(4ULL * 1024 * 1024 * 1024, allmem * zfs_dirty_data_max_max_percent / 100); #else if (zfs_dirty_data_max_max == 0) zfs_dirty_data_max_max = MIN(1ULL * 1024 * 1024 * 1024, allmem * zfs_dirty_data_max_max_percent / 100); #endif arc_set_sys_free(allmem); return (NOTIFY_OK); } #endif void arc_register_hotplug(void) { #ifdef CONFIG_MEMORY_HOTPLUG arc_hotplug_callback_mem_nb.notifier_call = arc_hotplug_callback; /* There is no significance to the value 100 */ arc_hotplug_callback_mem_nb.priority = 100; register_memory_notifier(&arc_hotplug_callback_mem_nb); #endif } void arc_unregister_hotplug(void) { #ifdef CONFIG_MEMORY_HOTPLUG unregister_memory_notifier(&arc_hotplug_callback_mem_nb); #endif } #else /* _KERNEL */ int64_t arc_available_memory(void) { int64_t lowest = INT64_MAX; /* Every 100 calls, free a small amount */ if (random_in_range(100) == 0) lowest = -1024; return (lowest); } int arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg) { (void) spa, (void) reserve, (void) txg; return (0); } uint64_t arc_all_memory(void) { return (ptob(physmem) / 2); } uint64_t arc_free_memory(void) { return (random_in_range(arc_all_memory() * 20 / 100)); } void arc_register_hotplug(void) { } void arc_unregister_hotplug(void) { } #endif /* _KERNEL */ ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, shrinker_limit, INT, ZMOD_RW, "Limit on number of pages that ARC shrinker can reclaim at once"); +ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, shrinker_seeks, INT, ZMOD_RD, + "Relative cost of ARC eviction vs other kernel subsystems"); diff --git a/module/zfs/arc.c b/module/zfs/arc.c index 30d30b98a6c6..27111781328e 100644 --- a/module/zfs/arc.c +++ b/module/zfs/arc.c @@ -1,10751 +1,10768 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2018, Joyent, Inc. * Copyright (c) 2011, 2020, Delphix. All rights reserved. * Copyright (c) 2014, Saso Kiselkov. All rights reserved. * Copyright (c) 2017, Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2019, loli10K . All rights reserved. * Copyright (c) 2020, George Amanakis. All rights reserved. * Copyright (c) 2019, Klara Inc. * Copyright (c) 2019, Allan Jude * Copyright (c) 2020, The FreeBSD Foundation [1] * * [1] Portions of this software were developed by Allan Jude * under sponsorship from the FreeBSD Foundation. */ /* * DVA-based Adjustable Replacement Cache * * While much of the theory of operation used here is * based on the self-tuning, low overhead replacement cache * presented by Megiddo and Modha at FAST 2003, there are some * significant differences: * * 1. The Megiddo and Modha model assumes any page is evictable. * Pages in its cache cannot be "locked" into memory. This makes * the eviction algorithm simple: evict the last page in the list. * This also make the performance characteristics easy to reason * about. Our cache is not so simple. At any given moment, some * subset of the blocks in the cache are un-evictable because we * have handed out a reference to them. Blocks are only evictable * when there are no external references active. This makes * eviction far more problematic: we choose to evict the evictable * blocks that are the "lowest" in the list. * * There are times when it is not possible to evict the requested * space. In these circumstances we are unable to adjust the cache * size. To prevent the cache growing unbounded at these times we * implement a "cache throttle" that slows the flow of new data * into the cache until we can make space available. * * 2. The Megiddo and Modha model assumes a fixed cache size. * Pages are evicted when the cache is full and there is a cache * miss. Our model has a variable sized cache. It grows with * high use, but also tries to react to memory pressure from the * operating system: decreasing its size when system memory is * tight. * * 3. The Megiddo and Modha model assumes a fixed page size. All * elements of the cache are therefore exactly the same size. So * when adjusting the cache size following a cache miss, its simply * a matter of choosing a single page to evict. In our model, we * have variable sized cache blocks (ranging from 512 bytes to * 128K bytes). We therefore choose a set of blocks to evict to make * space for a cache miss that approximates as closely as possible * the space used by the new block. * * See also: "ARC: A Self-Tuning, Low Overhead Replacement Cache" * by N. Megiddo & D. Modha, FAST 2003 */ /* * The locking model: * * A new reference to a cache buffer can be obtained in two * ways: 1) via a hash table lookup using the DVA as a key, * or 2) via one of the ARC lists. The arc_read() interface * uses method 1, while the internal ARC algorithms for * adjusting the cache use method 2. We therefore provide two * types of locks: 1) the hash table lock array, and 2) the * ARC list locks. * * Buffers do not have their own mutexes, rather they rely on the * hash table mutexes for the bulk of their protection (i.e. most * fields in the arc_buf_hdr_t are protected by these mutexes). * * buf_hash_find() returns the appropriate mutex (held) when it * locates the requested buffer in the hash table. It returns * NULL for the mutex if the buffer was not in the table. * * buf_hash_remove() expects the appropriate hash mutex to be * already held before it is invoked. * * Each ARC state also has a mutex which is used to protect the * buffer list associated with the state. When attempting to * obtain a hash table lock while holding an ARC list lock you * must use: mutex_tryenter() to avoid deadlock. Also note that * the active state mutex must be held before the ghost state mutex. * * It as also possible to register a callback which is run when the * metadata limit is reached and no buffers can be safely evicted. In * this case the arc user should drop a reference on some arc buffers so * they can be reclaimed. For example, when using the ZPL each dentry * holds a references on a znode. These dentries must be pruned before * the arc buffer holding the znode can be safely evicted. * * Note that the majority of the performance stats are manipulated * with atomic operations. * * The L2ARC uses the l2ad_mtx on each vdev for the following: * * - L2ARC buflist creation * - L2ARC buflist eviction * - L2ARC write completion, which walks L2ARC buflists * - ARC header destruction, as it removes from L2ARC buflists * - ARC header release, as it removes from L2ARC buflists */ /* * ARC operation: * * Every block that is in the ARC is tracked by an arc_buf_hdr_t structure. * This structure can point either to a block that is still in the cache or to * one that is only accessible in an L2 ARC device, or it can provide * information about a block that was recently evicted. If a block is * only accessible in the L2ARC, then the arc_buf_hdr_t only has enough * information to retrieve it from the L2ARC device. This information is * stored in the l2arc_buf_hdr_t sub-structure of the arc_buf_hdr_t. A block * that is in this state cannot access the data directly. * * Blocks that are actively being referenced or have not been evicted * are cached in the L1ARC. The L1ARC (l1arc_buf_hdr_t) is a structure within * the arc_buf_hdr_t that will point to the data block in memory. A block can * only be read by a consumer if it has an l1arc_buf_hdr_t. The L1ARC * caches data in two ways -- in a list of ARC buffers (arc_buf_t) and * also in the arc_buf_hdr_t's private physical data block pointer (b_pabd). * * The L1ARC's data pointer may or may not be uncompressed. The ARC has the * ability to store the physical data (b_pabd) associated with the DVA of the * arc_buf_hdr_t. Since the b_pabd is a copy of the on-disk physical block, * it will match its on-disk compression characteristics. This behavior can be * disabled by setting 'zfs_compressed_arc_enabled' to B_FALSE. When the * compressed ARC functionality is disabled, the b_pabd will point to an * uncompressed version of the on-disk data. * * Data in the L1ARC is not accessed by consumers of the ARC directly. Each * arc_buf_hdr_t can have multiple ARC buffers (arc_buf_t) which reference it. * Each ARC buffer (arc_buf_t) is being actively accessed by a specific ARC * consumer. The ARC will provide references to this data and will keep it * cached until it is no longer in use. The ARC caches only the L1ARC's physical * data block and will evict any arc_buf_t that is no longer referenced. The * amount of memory consumed by the arc_buf_ts' data buffers can be seen via the * "overhead_size" kstat. * * Depending on the consumer, an arc_buf_t can be requested in uncompressed or * compressed form. The typical case is that consumers will want uncompressed * data, and when that happens a new data buffer is allocated where the data is * decompressed for them to use. Currently the only consumer who wants * compressed arc_buf_t's is "zfs send", when it streams data exactly as it * exists on disk. When this happens, the arc_buf_t's data buffer is shared * with the arc_buf_hdr_t. * * Here is a diagram showing an arc_buf_hdr_t referenced by two arc_buf_t's. The * first one is owned by a compressed send consumer (and therefore references * the same compressed data buffer as the arc_buf_hdr_t) and the second could be * used by any other consumer (and has its own uncompressed copy of the data * buffer). * * arc_buf_hdr_t * +-----------+ * | fields | * | common to | * | L1- and | * | L2ARC | * +-----------+ * | l2arc_buf_hdr_t * | | * +-----------+ * | l1arc_buf_hdr_t * | | arc_buf_t * | b_buf +------------>+-----------+ arc_buf_t * | b_pabd +-+ |b_next +---->+-----------+ * +-----------+ | |-----------| |b_next +-->NULL * | |b_comp = T | +-----------+ * | |b_data +-+ |b_comp = F | * | +-----------+ | |b_data +-+ * +->+------+ | +-----------+ | * compressed | | | | * data | |<--------------+ | uncompressed * +------+ compressed, | data * shared +-->+------+ * data | | * | | * +------+ * * When a consumer reads a block, the ARC must first look to see if the * arc_buf_hdr_t is cached. If the hdr is cached then the ARC allocates a new * arc_buf_t and either copies uncompressed data into a new data buffer from an * existing uncompressed arc_buf_t, decompresses the hdr's b_pabd buffer into a * new data buffer, or shares the hdr's b_pabd buffer, depending on whether the * hdr is compressed and the desired compression characteristics of the * arc_buf_t consumer. If the arc_buf_t ends up sharing data with the * arc_buf_hdr_t and both of them are uncompressed then the arc_buf_t must be * the last buffer in the hdr's b_buf list, however a shared compressed buf can * be anywhere in the hdr's list. * * The diagram below shows an example of an uncompressed ARC hdr that is * sharing its data with an arc_buf_t (note that the shared uncompressed buf is * the last element in the buf list): * * arc_buf_hdr_t * +-----------+ * | | * | | * | | * +-----------+ * l2arc_buf_hdr_t| | * | | * +-----------+ * l1arc_buf_hdr_t| | * | | arc_buf_t (shared) * | b_buf +------------>+---------+ arc_buf_t * | | |b_next +---->+---------+ * | b_pabd +-+ |---------| |b_next +-->NULL * +-----------+ | | | +---------+ * | |b_data +-+ | | * | +---------+ | |b_data +-+ * +->+------+ | +---------+ | * | | | | * uncompressed | | | | * data +------+ | | * ^ +->+------+ | * | uncompressed | | | * | data | | | * | +------+ | * +---------------------------------+ * * Writing to the ARC requires that the ARC first discard the hdr's b_pabd * since the physical block is about to be rewritten. The new data contents * will be contained in the arc_buf_t. As the I/O pipeline performs the write, * it may compress the data before writing it to disk. The ARC will be called * with the transformed data and will memcpy the transformed on-disk block into * a newly allocated b_pabd. Writes are always done into buffers which have * either been loaned (and hence are new and don't have other readers) or * buffers which have been released (and hence have their own hdr, if there * were originally other readers of the buf's original hdr). This ensures that * the ARC only needs to update a single buf and its hdr after a write occurs. * * When the L2ARC is in use, it will also take advantage of the b_pabd. The * L2ARC will always write the contents of b_pabd to the L2ARC. This means * that when compressed ARC is enabled that the L2ARC blocks are identical * to the on-disk block in the main data pool. This provides a significant * advantage since the ARC can leverage the bp's checksum when reading from the * L2ARC to determine if the contents are valid. However, if the compressed * ARC is disabled, then the L2ARC's block must be transformed to look * like the physical block in the main data pool before comparing the * checksum and determining its validity. * * The L1ARC has a slightly different system for storing encrypted data. * Raw (encrypted + possibly compressed) data has a few subtle differences from * data that is just compressed. The biggest difference is that it is not * possible to decrypt encrypted data (or vice-versa) if the keys aren't loaded. * The other difference is that encryption cannot be treated as a suggestion. * If a caller would prefer compressed data, but they actually wind up with * uncompressed data the worst thing that could happen is there might be a * performance hit. If the caller requests encrypted data, however, we must be * sure they actually get it or else secret information could be leaked. Raw * data is stored in hdr->b_crypt_hdr.b_rabd. An encrypted header, therefore, * may have both an encrypted version and a decrypted version of its data at * once. When a caller needs a raw arc_buf_t, it is allocated and the data is * copied out of this header. To avoid complications with b_pabd, raw buffers * cannot be shared. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef _KERNEL /* set with ZFS_DEBUG=watch, to enable watchpoints on frozen buffers */ boolean_t arc_watch = B_FALSE; #endif /* * This thread's job is to keep enough free memory in the system, by * calling arc_kmem_reap_soon() plus arc_reduce_target_size(), which improves * arc_available_memory(). */ static zthr_t *arc_reap_zthr; /* * This thread's job is to keep arc_size under arc_c, by calling * arc_evict(), which improves arc_is_overflowing(). */ static zthr_t *arc_evict_zthr; static arc_buf_hdr_t **arc_state_evict_markers; static int arc_state_evict_marker_count; static kmutex_t arc_evict_lock; static boolean_t arc_evict_needed = B_FALSE; static clock_t arc_last_uncached_flush; /* * Count of bytes evicted since boot. */ static uint64_t arc_evict_count; /* * List of arc_evict_waiter_t's, representing threads waiting for the * arc_evict_count to reach specific values. */ static list_t arc_evict_waiters; /* * When arc_is_overflowing(), arc_get_data_impl() waits for this percent of * the requested amount of data to be evicted. For example, by default for * every 2KB that's evicted, 1KB of it may be "reused" by a new allocation. * Since this is above 100%, it ensures that progress is made towards getting * arc_size under arc_c. Since this is finite, it ensures that allocations * can still happen, even during the potentially long time that arc_size is * more than arc_c. */ static uint_t zfs_arc_eviction_pct = 200; /* * The number of headers to evict in arc_evict_state_impl() before * dropping the sublist lock and evicting from another sublist. A lower * value means we're more likely to evict the "correct" header (i.e. the * oldest header in the arc state), but comes with higher overhead * (i.e. more invocations of arc_evict_state_impl()). */ static uint_t zfs_arc_evict_batch_limit = 10; /* number of seconds before growing cache again */ uint_t arc_grow_retry = 5; /* * Minimum time between calls to arc_kmem_reap_soon(). */ static const int arc_kmem_cache_reap_retry_ms = 1000; /* shift of arc_c for calculating overflow limit in arc_get_data_impl */ static int zfs_arc_overflow_shift = 8; /* log2(fraction of arc to reclaim) */ uint_t arc_shrink_shift = 7; /* percent of pagecache to reclaim arc to */ #ifdef _KERNEL uint_t zfs_arc_pc_percent = 0; #endif /* * log2(fraction of ARC which must be free to allow growing). * I.e. If there is less than arc_c >> arc_no_grow_shift free memory, * when reading a new block into the ARC, we will evict an equal-sized block * from the ARC. * * This must be less than arc_shrink_shift, so that when we shrink the ARC, * we will still not allow it to grow. */ uint_t arc_no_grow_shift = 5; /* * minimum lifespan of a prefetch block in clock ticks * (initialized in arc_init()) */ static uint_t arc_min_prefetch_ms; static uint_t arc_min_prescient_prefetch_ms; /* * If this percent of memory is free, don't throttle. */ uint_t arc_lotsfree_percent = 10; /* * The arc has filled available memory and has now warmed up. */ boolean_t arc_warm; /* * These tunables are for performance analysis. */ uint64_t zfs_arc_max = 0; uint64_t zfs_arc_min = 0; static uint64_t zfs_arc_dnode_limit = 0; static uint_t zfs_arc_dnode_reduce_percent = 10; static uint_t zfs_arc_grow_retry = 0; static uint_t zfs_arc_shrink_shift = 0; uint_t zfs_arc_average_blocksize = 8 * 1024; /* 8KB */ /* * ARC dirty data constraints for arc_tempreserve_space() throttle: * * total dirty data limit * * anon block dirty limit * * each pool's anon allowance */ static const unsigned long zfs_arc_dirty_limit_percent = 50; static const unsigned long zfs_arc_anon_limit_percent = 25; static const unsigned long zfs_arc_pool_dirty_percent = 20; /* * Enable or disable compressed arc buffers. */ int zfs_compressed_arc_enabled = B_TRUE; /* * Balance between metadata and data on ghost hits. Values above 100 * increase metadata caching by proportionally reducing effect of ghost * data hits on target data/metadata rate. */ static uint_t zfs_arc_meta_balance = 500; /* * Percentage that can be consumed by dnodes of ARC meta buffers. */ static uint_t zfs_arc_dnode_limit_percent = 10; /* * These tunables are Linux-specific */ static uint64_t zfs_arc_sys_free = 0; static uint_t zfs_arc_min_prefetch_ms = 0; static uint_t zfs_arc_min_prescient_prefetch_ms = 0; static uint_t zfs_arc_lotsfree_percent = 10; /* * Number of arc_prune threads */ static int zfs_arc_prune_task_threads = 1; /* The 7 states: */ arc_state_t ARC_anon; arc_state_t ARC_mru; arc_state_t ARC_mru_ghost; arc_state_t ARC_mfu; arc_state_t ARC_mfu_ghost; arc_state_t ARC_l2c_only; arc_state_t ARC_uncached; arc_stats_t arc_stats = { { "hits", KSTAT_DATA_UINT64 }, { "iohits", KSTAT_DATA_UINT64 }, { "misses", KSTAT_DATA_UINT64 }, { "demand_data_hits", KSTAT_DATA_UINT64 }, { "demand_data_iohits", KSTAT_DATA_UINT64 }, { "demand_data_misses", KSTAT_DATA_UINT64 }, { "demand_metadata_hits", KSTAT_DATA_UINT64 }, { "demand_metadata_iohits", KSTAT_DATA_UINT64 }, { "demand_metadata_misses", KSTAT_DATA_UINT64 }, { "prefetch_data_hits", KSTAT_DATA_UINT64 }, { "prefetch_data_iohits", KSTAT_DATA_UINT64 }, { "prefetch_data_misses", KSTAT_DATA_UINT64 }, { "prefetch_metadata_hits", KSTAT_DATA_UINT64 }, { "prefetch_metadata_iohits", KSTAT_DATA_UINT64 }, { "prefetch_metadata_misses", KSTAT_DATA_UINT64 }, { "mru_hits", KSTAT_DATA_UINT64 }, { "mru_ghost_hits", KSTAT_DATA_UINT64 }, { "mfu_hits", KSTAT_DATA_UINT64 }, { "mfu_ghost_hits", KSTAT_DATA_UINT64 }, { "uncached_hits", KSTAT_DATA_UINT64 }, { "deleted", KSTAT_DATA_UINT64 }, { "mutex_miss", KSTAT_DATA_UINT64 }, { "access_skip", KSTAT_DATA_UINT64 }, { "evict_skip", KSTAT_DATA_UINT64 }, { "evict_not_enough", KSTAT_DATA_UINT64 }, { "evict_l2_cached", KSTAT_DATA_UINT64 }, { "evict_l2_eligible", KSTAT_DATA_UINT64 }, { "evict_l2_eligible_mfu", KSTAT_DATA_UINT64 }, { "evict_l2_eligible_mru", KSTAT_DATA_UINT64 }, { "evict_l2_ineligible", KSTAT_DATA_UINT64 }, { "evict_l2_skip", KSTAT_DATA_UINT64 }, { "hash_elements", KSTAT_DATA_UINT64 }, { "hash_elements_max", KSTAT_DATA_UINT64 }, { "hash_collisions", KSTAT_DATA_UINT64 }, { "hash_chains", KSTAT_DATA_UINT64 }, { "hash_chain_max", KSTAT_DATA_UINT64 }, { "meta", KSTAT_DATA_UINT64 }, { "pd", KSTAT_DATA_UINT64 }, { "pm", KSTAT_DATA_UINT64 }, { "c", KSTAT_DATA_UINT64 }, { "c_min", KSTAT_DATA_UINT64 }, { "c_max", KSTAT_DATA_UINT64 }, { "size", KSTAT_DATA_UINT64 }, { "compressed_size", KSTAT_DATA_UINT64 }, { "uncompressed_size", KSTAT_DATA_UINT64 }, { "overhead_size", KSTAT_DATA_UINT64 }, { "hdr_size", KSTAT_DATA_UINT64 }, { "data_size", KSTAT_DATA_UINT64 }, { "metadata_size", KSTAT_DATA_UINT64 }, { "dbuf_size", KSTAT_DATA_UINT64 }, { "dnode_size", KSTAT_DATA_UINT64 }, { "bonus_size", KSTAT_DATA_UINT64 }, #if defined(COMPAT_FREEBSD11) { "other_size", KSTAT_DATA_UINT64 }, #endif { "anon_size", KSTAT_DATA_UINT64 }, { "anon_data", KSTAT_DATA_UINT64 }, { "anon_metadata", KSTAT_DATA_UINT64 }, { "anon_evictable_data", KSTAT_DATA_UINT64 }, { "anon_evictable_metadata", KSTAT_DATA_UINT64 }, { "mru_size", KSTAT_DATA_UINT64 }, { "mru_data", KSTAT_DATA_UINT64 }, { "mru_metadata", KSTAT_DATA_UINT64 }, { "mru_evictable_data", KSTAT_DATA_UINT64 }, { "mru_evictable_metadata", KSTAT_DATA_UINT64 }, { "mru_ghost_size", KSTAT_DATA_UINT64 }, { "mru_ghost_data", KSTAT_DATA_UINT64 }, { "mru_ghost_metadata", KSTAT_DATA_UINT64 }, { "mru_ghost_evictable_data", KSTAT_DATA_UINT64 }, { "mru_ghost_evictable_metadata", KSTAT_DATA_UINT64 }, { "mfu_size", KSTAT_DATA_UINT64 }, { "mfu_data", KSTAT_DATA_UINT64 }, { "mfu_metadata", KSTAT_DATA_UINT64 }, { "mfu_evictable_data", KSTAT_DATA_UINT64 }, { "mfu_evictable_metadata", KSTAT_DATA_UINT64 }, { "mfu_ghost_size", KSTAT_DATA_UINT64 }, { "mfu_ghost_data", KSTAT_DATA_UINT64 }, { "mfu_ghost_metadata", KSTAT_DATA_UINT64 }, { "mfu_ghost_evictable_data", KSTAT_DATA_UINT64 }, { "mfu_ghost_evictable_metadata", KSTAT_DATA_UINT64 }, { "uncached_size", KSTAT_DATA_UINT64 }, { "uncached_data", KSTAT_DATA_UINT64 }, { "uncached_metadata", KSTAT_DATA_UINT64 }, { "uncached_evictable_data", KSTAT_DATA_UINT64 }, { "uncached_evictable_metadata", KSTAT_DATA_UINT64 }, { "l2_hits", KSTAT_DATA_UINT64 }, { "l2_misses", KSTAT_DATA_UINT64 }, { "l2_prefetch_asize", KSTAT_DATA_UINT64 }, { "l2_mru_asize", KSTAT_DATA_UINT64 }, { "l2_mfu_asize", KSTAT_DATA_UINT64 }, { "l2_bufc_data_asize", KSTAT_DATA_UINT64 }, { "l2_bufc_metadata_asize", KSTAT_DATA_UINT64 }, { "l2_feeds", KSTAT_DATA_UINT64 }, { "l2_rw_clash", KSTAT_DATA_UINT64 }, { "l2_read_bytes", KSTAT_DATA_UINT64 }, { "l2_write_bytes", KSTAT_DATA_UINT64 }, { "l2_writes_sent", KSTAT_DATA_UINT64 }, { "l2_writes_done", KSTAT_DATA_UINT64 }, { "l2_writes_error", KSTAT_DATA_UINT64 }, { "l2_writes_lock_retry", KSTAT_DATA_UINT64 }, { "l2_evict_lock_retry", KSTAT_DATA_UINT64 }, { "l2_evict_reading", KSTAT_DATA_UINT64 }, { "l2_evict_l1cached", KSTAT_DATA_UINT64 }, { "l2_free_on_write", KSTAT_DATA_UINT64 }, { "l2_abort_lowmem", KSTAT_DATA_UINT64 }, { "l2_cksum_bad", KSTAT_DATA_UINT64 }, { "l2_io_error", KSTAT_DATA_UINT64 }, { "l2_size", KSTAT_DATA_UINT64 }, { "l2_asize", KSTAT_DATA_UINT64 }, { "l2_hdr_size", KSTAT_DATA_UINT64 }, { "l2_log_blk_writes", KSTAT_DATA_UINT64 }, { "l2_log_blk_avg_asize", KSTAT_DATA_UINT64 }, { "l2_log_blk_asize", KSTAT_DATA_UINT64 }, { "l2_log_blk_count", KSTAT_DATA_UINT64 }, { "l2_data_to_meta_ratio", KSTAT_DATA_UINT64 }, { "l2_rebuild_success", KSTAT_DATA_UINT64 }, { "l2_rebuild_unsupported", KSTAT_DATA_UINT64 }, { "l2_rebuild_io_errors", KSTAT_DATA_UINT64 }, { "l2_rebuild_dh_errors", KSTAT_DATA_UINT64 }, { "l2_rebuild_cksum_lb_errors", KSTAT_DATA_UINT64 }, { "l2_rebuild_lowmem", KSTAT_DATA_UINT64 }, { "l2_rebuild_size", KSTAT_DATA_UINT64 }, { "l2_rebuild_asize", KSTAT_DATA_UINT64 }, { "l2_rebuild_bufs", KSTAT_DATA_UINT64 }, { "l2_rebuild_bufs_precached", KSTAT_DATA_UINT64 }, { "l2_rebuild_log_blks", KSTAT_DATA_UINT64 }, { "memory_throttle_count", KSTAT_DATA_UINT64 }, { "memory_direct_count", KSTAT_DATA_UINT64 }, { "memory_indirect_count", KSTAT_DATA_UINT64 }, { "memory_all_bytes", KSTAT_DATA_UINT64 }, { "memory_free_bytes", KSTAT_DATA_UINT64 }, { "memory_available_bytes", KSTAT_DATA_INT64 }, { "arc_no_grow", KSTAT_DATA_UINT64 }, { "arc_tempreserve", KSTAT_DATA_UINT64 }, { "arc_loaned_bytes", KSTAT_DATA_UINT64 }, { "arc_prune", KSTAT_DATA_UINT64 }, { "arc_meta_used", KSTAT_DATA_UINT64 }, { "arc_dnode_limit", KSTAT_DATA_UINT64 }, { "async_upgrade_sync", KSTAT_DATA_UINT64 }, { "predictive_prefetch", KSTAT_DATA_UINT64 }, { "demand_hit_predictive_prefetch", KSTAT_DATA_UINT64 }, { "demand_iohit_predictive_prefetch", KSTAT_DATA_UINT64 }, { "prescient_prefetch", KSTAT_DATA_UINT64 }, { "demand_hit_prescient_prefetch", KSTAT_DATA_UINT64 }, { "demand_iohit_prescient_prefetch", KSTAT_DATA_UINT64 }, { "arc_need_free", KSTAT_DATA_UINT64 }, { "arc_sys_free", KSTAT_DATA_UINT64 }, { "arc_raw_size", KSTAT_DATA_UINT64 }, { "cached_only_in_progress", KSTAT_DATA_UINT64 }, { "abd_chunk_waste_size", KSTAT_DATA_UINT64 }, }; arc_sums_t arc_sums; #define ARCSTAT_MAX(stat, val) { \ uint64_t m; \ while ((val) > (m = arc_stats.stat.value.ui64) && \ (m != atomic_cas_64(&arc_stats.stat.value.ui64, m, (val)))) \ continue; \ } /* * We define a macro to allow ARC hits/misses to be easily broken down by * two separate conditions, giving a total of four different subtypes for * each of hits and misses (so eight statistics total). */ #define ARCSTAT_CONDSTAT(cond1, stat1, notstat1, cond2, stat2, notstat2, stat) \ if (cond1) { \ if (cond2) { \ ARCSTAT_BUMP(arcstat_##stat1##_##stat2##_##stat); \ } else { \ ARCSTAT_BUMP(arcstat_##stat1##_##notstat2##_##stat); \ } \ } else { \ if (cond2) { \ ARCSTAT_BUMP(arcstat_##notstat1##_##stat2##_##stat); \ } else { \ ARCSTAT_BUMP(arcstat_##notstat1##_##notstat2##_##stat);\ } \ } /* * This macro allows us to use kstats as floating averages. Each time we * update this kstat, we first factor it and the update value by * ARCSTAT_AVG_FACTOR to shrink the new value's contribution to the overall * average. This macro assumes that integer loads and stores are atomic, but * is not safe for multiple writers updating the kstat in parallel (only the * last writer's update will remain). */ #define ARCSTAT_F_AVG_FACTOR 3 #define ARCSTAT_F_AVG(stat, value) \ do { \ uint64_t x = ARCSTAT(stat); \ x = x - x / ARCSTAT_F_AVG_FACTOR + \ (value) / ARCSTAT_F_AVG_FACTOR; \ ARCSTAT(stat) = x; \ } while (0) static kstat_t *arc_ksp; /* * There are several ARC variables that are critical to export as kstats -- * but we don't want to have to grovel around in the kstat whenever we wish to * manipulate them. For these variables, we therefore define them to be in * terms of the statistic variable. This assures that we are not introducing * the possibility of inconsistency by having shadow copies of the variables, * while still allowing the code to be readable. */ #define arc_tempreserve ARCSTAT(arcstat_tempreserve) #define arc_loaned_bytes ARCSTAT(arcstat_loaned_bytes) #define arc_dnode_limit ARCSTAT(arcstat_dnode_limit) /* max size for dnodes */ #define arc_need_free ARCSTAT(arcstat_need_free) /* waiting to be evicted */ hrtime_t arc_growtime; list_t arc_prune_list; kmutex_t arc_prune_mtx; taskq_t *arc_prune_taskq; #define GHOST_STATE(state) \ ((state) == arc_mru_ghost || (state) == arc_mfu_ghost || \ (state) == arc_l2c_only) #define HDR_IN_HASH_TABLE(hdr) ((hdr)->b_flags & ARC_FLAG_IN_HASH_TABLE) #define HDR_IO_IN_PROGRESS(hdr) ((hdr)->b_flags & ARC_FLAG_IO_IN_PROGRESS) #define HDR_IO_ERROR(hdr) ((hdr)->b_flags & ARC_FLAG_IO_ERROR) #define HDR_PREFETCH(hdr) ((hdr)->b_flags & ARC_FLAG_PREFETCH) #define HDR_PRESCIENT_PREFETCH(hdr) \ ((hdr)->b_flags & ARC_FLAG_PRESCIENT_PREFETCH) #define HDR_COMPRESSION_ENABLED(hdr) \ ((hdr)->b_flags & ARC_FLAG_COMPRESSED_ARC) #define HDR_L2CACHE(hdr) ((hdr)->b_flags & ARC_FLAG_L2CACHE) #define HDR_UNCACHED(hdr) ((hdr)->b_flags & ARC_FLAG_UNCACHED) #define HDR_L2_READING(hdr) \ (((hdr)->b_flags & ARC_FLAG_IO_IN_PROGRESS) && \ ((hdr)->b_flags & ARC_FLAG_HAS_L2HDR)) #define HDR_L2_WRITING(hdr) ((hdr)->b_flags & ARC_FLAG_L2_WRITING) #define HDR_L2_EVICTED(hdr) ((hdr)->b_flags & ARC_FLAG_L2_EVICTED) #define HDR_L2_WRITE_HEAD(hdr) ((hdr)->b_flags & ARC_FLAG_L2_WRITE_HEAD) #define HDR_PROTECTED(hdr) ((hdr)->b_flags & ARC_FLAG_PROTECTED) #define HDR_NOAUTH(hdr) ((hdr)->b_flags & ARC_FLAG_NOAUTH) #define HDR_SHARED_DATA(hdr) ((hdr)->b_flags & ARC_FLAG_SHARED_DATA) #define HDR_ISTYPE_METADATA(hdr) \ ((hdr)->b_flags & ARC_FLAG_BUFC_METADATA) #define HDR_ISTYPE_DATA(hdr) (!HDR_ISTYPE_METADATA(hdr)) #define HDR_HAS_L1HDR(hdr) ((hdr)->b_flags & ARC_FLAG_HAS_L1HDR) #define HDR_HAS_L2HDR(hdr) ((hdr)->b_flags & ARC_FLAG_HAS_L2HDR) #define HDR_HAS_RABD(hdr) \ (HDR_HAS_L1HDR(hdr) && HDR_PROTECTED(hdr) && \ (hdr)->b_crypt_hdr.b_rabd != NULL) #define HDR_ENCRYPTED(hdr) \ (HDR_PROTECTED(hdr) && DMU_OT_IS_ENCRYPTED((hdr)->b_crypt_hdr.b_ot)) #define HDR_AUTHENTICATED(hdr) \ (HDR_PROTECTED(hdr) && !DMU_OT_IS_ENCRYPTED((hdr)->b_crypt_hdr.b_ot)) /* For storing compression mode in b_flags */ #define HDR_COMPRESS_OFFSET (highbit64(ARC_FLAG_COMPRESS_0) - 1) #define HDR_GET_COMPRESS(hdr) ((enum zio_compress)BF32_GET((hdr)->b_flags, \ HDR_COMPRESS_OFFSET, SPA_COMPRESSBITS)) #define HDR_SET_COMPRESS(hdr, cmp) BF32_SET((hdr)->b_flags, \ HDR_COMPRESS_OFFSET, SPA_COMPRESSBITS, (cmp)); #define ARC_BUF_LAST(buf) ((buf)->b_next == NULL) #define ARC_BUF_SHARED(buf) ((buf)->b_flags & ARC_BUF_FLAG_SHARED) #define ARC_BUF_COMPRESSED(buf) ((buf)->b_flags & ARC_BUF_FLAG_COMPRESSED) #define ARC_BUF_ENCRYPTED(buf) ((buf)->b_flags & ARC_BUF_FLAG_ENCRYPTED) /* * Other sizes */ #define HDR_FULL_SIZE ((int64_t)sizeof (arc_buf_hdr_t)) #define HDR_L2ONLY_SIZE ((int64_t)offsetof(arc_buf_hdr_t, b_l1hdr)) /* * Hash table routines */ #define BUF_LOCKS 2048 typedef struct buf_hash_table { uint64_t ht_mask; arc_buf_hdr_t **ht_table; kmutex_t ht_locks[BUF_LOCKS] ____cacheline_aligned; } buf_hash_table_t; static buf_hash_table_t buf_hash_table; #define BUF_HASH_INDEX(spa, dva, birth) \ (buf_hash(spa, dva, birth) & buf_hash_table.ht_mask) #define BUF_HASH_LOCK(idx) (&buf_hash_table.ht_locks[idx & (BUF_LOCKS-1)]) #define HDR_LOCK(hdr) \ (BUF_HASH_LOCK(BUF_HASH_INDEX(hdr->b_spa, &hdr->b_dva, hdr->b_birth))) uint64_t zfs_crc64_table[256]; /* * Level 2 ARC */ #define L2ARC_WRITE_SIZE (32 * 1024 * 1024) /* initial write max */ #define L2ARC_HEADROOM 8 /* num of writes */ /* * If we discover during ARC scan any buffers to be compressed, we boost * our headroom for the next scanning cycle by this percentage multiple. */ #define L2ARC_HEADROOM_BOOST 200 #define L2ARC_FEED_SECS 1 /* caching interval secs */ #define L2ARC_FEED_MIN_MS 200 /* min caching interval ms */ /* * We can feed L2ARC from two states of ARC buffers, mru and mfu, * and each of the state has two types: data and metadata. */ #define L2ARC_FEED_TYPES 4 /* L2ARC Performance Tunables */ uint64_t l2arc_write_max = L2ARC_WRITE_SIZE; /* def max write size */ uint64_t l2arc_write_boost = L2ARC_WRITE_SIZE; /* extra warmup write */ uint64_t l2arc_headroom = L2ARC_HEADROOM; /* # of dev writes */ uint64_t l2arc_headroom_boost = L2ARC_HEADROOM_BOOST; uint64_t l2arc_feed_secs = L2ARC_FEED_SECS; /* interval seconds */ uint64_t l2arc_feed_min_ms = L2ARC_FEED_MIN_MS; /* min interval msecs */ int l2arc_noprefetch = B_TRUE; /* don't cache prefetch bufs */ int l2arc_feed_again = B_TRUE; /* turbo warmup */ int l2arc_norw = B_FALSE; /* no reads during writes */ static uint_t l2arc_meta_percent = 33; /* limit on headers size */ /* * L2ARC Internals */ static list_t L2ARC_dev_list; /* device list */ static list_t *l2arc_dev_list; /* device list pointer */ static kmutex_t l2arc_dev_mtx; /* device list mutex */ static l2arc_dev_t *l2arc_dev_last; /* last device used */ static list_t L2ARC_free_on_write; /* free after write buf list */ static list_t *l2arc_free_on_write; /* free after write list ptr */ static kmutex_t l2arc_free_on_write_mtx; /* mutex for list */ static uint64_t l2arc_ndev; /* number of devices */ typedef struct l2arc_read_callback { arc_buf_hdr_t *l2rcb_hdr; /* read header */ blkptr_t l2rcb_bp; /* original blkptr */ zbookmark_phys_t l2rcb_zb; /* original bookmark */ int l2rcb_flags; /* original flags */ abd_t *l2rcb_abd; /* temporary buffer */ } l2arc_read_callback_t; typedef struct l2arc_data_free { /* protected by l2arc_free_on_write_mtx */ abd_t *l2df_abd; size_t l2df_size; arc_buf_contents_t l2df_type; list_node_t l2df_list_node; } l2arc_data_free_t; typedef enum arc_fill_flags { ARC_FILL_LOCKED = 1 << 0, /* hdr lock is held */ ARC_FILL_COMPRESSED = 1 << 1, /* fill with compressed data */ ARC_FILL_ENCRYPTED = 1 << 2, /* fill with encrypted data */ ARC_FILL_NOAUTH = 1 << 3, /* don't attempt to authenticate */ ARC_FILL_IN_PLACE = 1 << 4 /* fill in place (special case) */ } arc_fill_flags_t; typedef enum arc_ovf_level { ARC_OVF_NONE, /* ARC within target size. */ ARC_OVF_SOME, /* ARC is slightly overflowed. */ ARC_OVF_SEVERE /* ARC is severely overflowed. */ } arc_ovf_level_t; static kmutex_t l2arc_feed_thr_lock; static kcondvar_t l2arc_feed_thr_cv; static uint8_t l2arc_thread_exit; static kmutex_t l2arc_rebuild_thr_lock; static kcondvar_t l2arc_rebuild_thr_cv; enum arc_hdr_alloc_flags { ARC_HDR_ALLOC_RDATA = 0x1, ARC_HDR_USE_RESERVE = 0x4, ARC_HDR_ALLOC_LINEAR = 0x8, }; static abd_t *arc_get_data_abd(arc_buf_hdr_t *, uint64_t, const void *, int); static void *arc_get_data_buf(arc_buf_hdr_t *, uint64_t, const void *); static void arc_get_data_impl(arc_buf_hdr_t *, uint64_t, const void *, int); static void arc_free_data_abd(arc_buf_hdr_t *, abd_t *, uint64_t, const void *); static void arc_free_data_buf(arc_buf_hdr_t *, void *, uint64_t, const void *); static void arc_free_data_impl(arc_buf_hdr_t *hdr, uint64_t size, const void *tag); static void arc_hdr_free_abd(arc_buf_hdr_t *, boolean_t); static void arc_hdr_alloc_abd(arc_buf_hdr_t *, int); static void arc_hdr_destroy(arc_buf_hdr_t *); static void arc_access(arc_buf_hdr_t *, arc_flags_t, boolean_t); static void arc_buf_watch(arc_buf_t *); static void arc_change_state(arc_state_t *, arc_buf_hdr_t *); static arc_buf_contents_t arc_buf_type(arc_buf_hdr_t *); static uint32_t arc_bufc_to_flags(arc_buf_contents_t); static inline void arc_hdr_set_flags(arc_buf_hdr_t *hdr, arc_flags_t flags); static inline void arc_hdr_clear_flags(arc_buf_hdr_t *hdr, arc_flags_t flags); static boolean_t l2arc_write_eligible(uint64_t, arc_buf_hdr_t *); static void l2arc_read_done(zio_t *); static void l2arc_do_free_on_write(void); static void l2arc_hdr_arcstats_update(arc_buf_hdr_t *hdr, boolean_t incr, boolean_t state_only); static void arc_prune_async(uint64_t adjust); #define l2arc_hdr_arcstats_increment(hdr) \ l2arc_hdr_arcstats_update((hdr), B_TRUE, B_FALSE) #define l2arc_hdr_arcstats_decrement(hdr) \ l2arc_hdr_arcstats_update((hdr), B_FALSE, B_FALSE) #define l2arc_hdr_arcstats_increment_state(hdr) \ l2arc_hdr_arcstats_update((hdr), B_TRUE, B_TRUE) #define l2arc_hdr_arcstats_decrement_state(hdr) \ l2arc_hdr_arcstats_update((hdr), B_FALSE, B_TRUE) /* * l2arc_exclude_special : A zfs module parameter that controls whether buffers * present on special vdevs are eligibile for caching in L2ARC. If * set to 1, exclude dbufs on special vdevs from being cached to * L2ARC. */ int l2arc_exclude_special = 0; /* * l2arc_mfuonly : A ZFS module parameter that controls whether only MFU * metadata and data are cached from ARC into L2ARC. */ static int l2arc_mfuonly = 0; /* * L2ARC TRIM * l2arc_trim_ahead : A ZFS module parameter that controls how much ahead of * the current write size (l2arc_write_max) we should TRIM if we * have filled the device. It is defined as a percentage of the * write size. If set to 100 we trim twice the space required to * accommodate upcoming writes. A minimum of 64MB will be trimmed. * It also enables TRIM of the whole L2ARC device upon creation or * addition to an existing pool or if the header of the device is * invalid upon importing a pool or onlining a cache device. The * default is 0, which disables TRIM on L2ARC altogether as it can * put significant stress on the underlying storage devices. This * will vary depending of how well the specific device handles * these commands. */ static uint64_t l2arc_trim_ahead = 0; /* * Performance tuning of L2ARC persistence: * * l2arc_rebuild_enabled : A ZFS module parameter that controls whether adding * an L2ARC device (either at pool import or later) will attempt * to rebuild L2ARC buffer contents. * l2arc_rebuild_blocks_min_l2size : A ZFS module parameter that controls * whether log blocks are written to the L2ARC device. If the L2ARC * device is less than 1GB, the amount of data l2arc_evict() * evicts is significant compared to the amount of restored L2ARC * data. In this case do not write log blocks in L2ARC in order * not to waste space. */ static int l2arc_rebuild_enabled = B_TRUE; static uint64_t l2arc_rebuild_blocks_min_l2size = 1024 * 1024 * 1024; /* L2ARC persistence rebuild control routines. */ void l2arc_rebuild_vdev(vdev_t *vd, boolean_t reopen); static __attribute__((noreturn)) void l2arc_dev_rebuild_thread(void *arg); static int l2arc_rebuild(l2arc_dev_t *dev); /* L2ARC persistence read I/O routines. */ static int l2arc_dev_hdr_read(l2arc_dev_t *dev); static int l2arc_log_blk_read(l2arc_dev_t *dev, const l2arc_log_blkptr_t *this_lp, const l2arc_log_blkptr_t *next_lp, l2arc_log_blk_phys_t *this_lb, l2arc_log_blk_phys_t *next_lb, zio_t *this_io, zio_t **next_io); static zio_t *l2arc_log_blk_fetch(vdev_t *vd, const l2arc_log_blkptr_t *lp, l2arc_log_blk_phys_t *lb); static void l2arc_log_blk_fetch_abort(zio_t *zio); /* L2ARC persistence block restoration routines. */ static void l2arc_log_blk_restore(l2arc_dev_t *dev, const l2arc_log_blk_phys_t *lb, uint64_t lb_asize); static void l2arc_hdr_restore(const l2arc_log_ent_phys_t *le, l2arc_dev_t *dev); /* L2ARC persistence write I/O routines. */ static uint64_t l2arc_log_blk_commit(l2arc_dev_t *dev, zio_t *pio, l2arc_write_callback_t *cb); /* L2ARC persistence auxiliary routines. */ boolean_t l2arc_log_blkptr_valid(l2arc_dev_t *dev, const l2arc_log_blkptr_t *lbp); static boolean_t l2arc_log_blk_insert(l2arc_dev_t *dev, const arc_buf_hdr_t *ab); boolean_t l2arc_range_check_overlap(uint64_t bottom, uint64_t top, uint64_t check); static void l2arc_blk_fetch_done(zio_t *zio); static inline uint64_t l2arc_log_blk_overhead(uint64_t write_sz, l2arc_dev_t *dev); /* * We use Cityhash for this. It's fast, and has good hash properties without * requiring any large static buffers. */ static uint64_t buf_hash(uint64_t spa, const dva_t *dva, uint64_t birth) { return (cityhash4(spa, dva->dva_word[0], dva->dva_word[1], birth)); } #define HDR_EMPTY(hdr) \ ((hdr)->b_dva.dva_word[0] == 0 && \ (hdr)->b_dva.dva_word[1] == 0) #define HDR_EMPTY_OR_LOCKED(hdr) \ (HDR_EMPTY(hdr) || MUTEX_HELD(HDR_LOCK(hdr))) #define HDR_EQUAL(spa, dva, birth, hdr) \ ((hdr)->b_dva.dva_word[0] == (dva)->dva_word[0]) && \ ((hdr)->b_dva.dva_word[1] == (dva)->dva_word[1]) && \ ((hdr)->b_birth == birth) && ((hdr)->b_spa == spa) static void buf_discard_identity(arc_buf_hdr_t *hdr) { hdr->b_dva.dva_word[0] = 0; hdr->b_dva.dva_word[1] = 0; hdr->b_birth = 0; } static arc_buf_hdr_t * buf_hash_find(uint64_t spa, const blkptr_t *bp, kmutex_t **lockp) { const dva_t *dva = BP_IDENTITY(bp); uint64_t birth = BP_GET_BIRTH(bp); uint64_t idx = BUF_HASH_INDEX(spa, dva, birth); kmutex_t *hash_lock = BUF_HASH_LOCK(idx); arc_buf_hdr_t *hdr; mutex_enter(hash_lock); for (hdr = buf_hash_table.ht_table[idx]; hdr != NULL; hdr = hdr->b_hash_next) { if (HDR_EQUAL(spa, dva, birth, hdr)) { *lockp = hash_lock; return (hdr); } } mutex_exit(hash_lock); *lockp = NULL; return (NULL); } /* * Insert an entry into the hash table. If there is already an element * equal to elem in the hash table, then the already existing element * will be returned and the new element will not be inserted. * Otherwise returns NULL. * If lockp == NULL, the caller is assumed to already hold the hash lock. */ static arc_buf_hdr_t * buf_hash_insert(arc_buf_hdr_t *hdr, kmutex_t **lockp) { uint64_t idx = BUF_HASH_INDEX(hdr->b_spa, &hdr->b_dva, hdr->b_birth); kmutex_t *hash_lock = BUF_HASH_LOCK(idx); arc_buf_hdr_t *fhdr; uint32_t i; ASSERT(!DVA_IS_EMPTY(&hdr->b_dva)); ASSERT(hdr->b_birth != 0); ASSERT(!HDR_IN_HASH_TABLE(hdr)); if (lockp != NULL) { *lockp = hash_lock; mutex_enter(hash_lock); } else { ASSERT(MUTEX_HELD(hash_lock)); } for (fhdr = buf_hash_table.ht_table[idx], i = 0; fhdr != NULL; fhdr = fhdr->b_hash_next, i++) { if (HDR_EQUAL(hdr->b_spa, &hdr->b_dva, hdr->b_birth, fhdr)) return (fhdr); } hdr->b_hash_next = buf_hash_table.ht_table[idx]; buf_hash_table.ht_table[idx] = hdr; arc_hdr_set_flags(hdr, ARC_FLAG_IN_HASH_TABLE); /* collect some hash table performance data */ if (i > 0) { ARCSTAT_BUMP(arcstat_hash_collisions); if (i == 1) ARCSTAT_BUMP(arcstat_hash_chains); ARCSTAT_MAX(arcstat_hash_chain_max, i); } uint64_t he = atomic_inc_64_nv( &arc_stats.arcstat_hash_elements.value.ui64); ARCSTAT_MAX(arcstat_hash_elements_max, he); return (NULL); } static void buf_hash_remove(arc_buf_hdr_t *hdr) { arc_buf_hdr_t *fhdr, **hdrp; uint64_t idx = BUF_HASH_INDEX(hdr->b_spa, &hdr->b_dva, hdr->b_birth); ASSERT(MUTEX_HELD(BUF_HASH_LOCK(idx))); ASSERT(HDR_IN_HASH_TABLE(hdr)); hdrp = &buf_hash_table.ht_table[idx]; while ((fhdr = *hdrp) != hdr) { ASSERT3P(fhdr, !=, NULL); hdrp = &fhdr->b_hash_next; } *hdrp = hdr->b_hash_next; hdr->b_hash_next = NULL; arc_hdr_clear_flags(hdr, ARC_FLAG_IN_HASH_TABLE); /* collect some hash table performance data */ atomic_dec_64(&arc_stats.arcstat_hash_elements.value.ui64); if (buf_hash_table.ht_table[idx] && buf_hash_table.ht_table[idx]->b_hash_next == NULL) ARCSTAT_BUMPDOWN(arcstat_hash_chains); } /* * Global data structures and functions for the buf kmem cache. */ static kmem_cache_t *hdr_full_cache; static kmem_cache_t *hdr_l2only_cache; static kmem_cache_t *buf_cache; static void buf_fini(void) { #if defined(_KERNEL) /* * Large allocations which do not require contiguous pages * should be using vmem_free() in the linux kernel\ */ vmem_free(buf_hash_table.ht_table, (buf_hash_table.ht_mask + 1) * sizeof (void *)); #else kmem_free(buf_hash_table.ht_table, (buf_hash_table.ht_mask + 1) * sizeof (void *)); #endif for (int i = 0; i < BUF_LOCKS; i++) mutex_destroy(BUF_HASH_LOCK(i)); kmem_cache_destroy(hdr_full_cache); kmem_cache_destroy(hdr_l2only_cache); kmem_cache_destroy(buf_cache); } /* * Constructor callback - called when the cache is empty * and a new buf is requested. */ static int hdr_full_cons(void *vbuf, void *unused, int kmflag) { (void) unused, (void) kmflag; arc_buf_hdr_t *hdr = vbuf; memset(hdr, 0, HDR_FULL_SIZE); hdr->b_l1hdr.b_byteswap = DMU_BSWAP_NUMFUNCS; zfs_refcount_create(&hdr->b_l1hdr.b_refcnt); #ifdef ZFS_DEBUG mutex_init(&hdr->b_l1hdr.b_freeze_lock, NULL, MUTEX_DEFAULT, NULL); #endif multilist_link_init(&hdr->b_l1hdr.b_arc_node); list_link_init(&hdr->b_l2hdr.b_l2node); arc_space_consume(HDR_FULL_SIZE, ARC_SPACE_HDRS); return (0); } static int hdr_l2only_cons(void *vbuf, void *unused, int kmflag) { (void) unused, (void) kmflag; arc_buf_hdr_t *hdr = vbuf; memset(hdr, 0, HDR_L2ONLY_SIZE); arc_space_consume(HDR_L2ONLY_SIZE, ARC_SPACE_L2HDRS); return (0); } static int buf_cons(void *vbuf, void *unused, int kmflag) { (void) unused, (void) kmflag; arc_buf_t *buf = vbuf; memset(buf, 0, sizeof (arc_buf_t)); arc_space_consume(sizeof (arc_buf_t), ARC_SPACE_HDRS); return (0); } /* * Destructor callback - called when a cached buf is * no longer required. */ static void hdr_full_dest(void *vbuf, void *unused) { (void) unused; arc_buf_hdr_t *hdr = vbuf; ASSERT(HDR_EMPTY(hdr)); zfs_refcount_destroy(&hdr->b_l1hdr.b_refcnt); #ifdef ZFS_DEBUG mutex_destroy(&hdr->b_l1hdr.b_freeze_lock); #endif ASSERT(!multilist_link_active(&hdr->b_l1hdr.b_arc_node)); arc_space_return(HDR_FULL_SIZE, ARC_SPACE_HDRS); } static void hdr_l2only_dest(void *vbuf, void *unused) { (void) unused; arc_buf_hdr_t *hdr = vbuf; ASSERT(HDR_EMPTY(hdr)); arc_space_return(HDR_L2ONLY_SIZE, ARC_SPACE_L2HDRS); } static void buf_dest(void *vbuf, void *unused) { (void) unused; (void) vbuf; arc_space_return(sizeof (arc_buf_t), ARC_SPACE_HDRS); } static void buf_init(void) { uint64_t *ct = NULL; uint64_t hsize = 1ULL << 12; int i, j; /* * The hash table is big enough to fill all of physical memory * with an average block size of zfs_arc_average_blocksize (default 8K). * By default, the table will take up * totalmem * sizeof(void*) / 8K (1MB per GB with 8-byte pointers). */ while (hsize * zfs_arc_average_blocksize < arc_all_memory()) hsize <<= 1; retry: buf_hash_table.ht_mask = hsize - 1; #if defined(_KERNEL) /* * Large allocations which do not require contiguous pages * should be using vmem_alloc() in the linux kernel */ buf_hash_table.ht_table = vmem_zalloc(hsize * sizeof (void*), KM_SLEEP); #else buf_hash_table.ht_table = kmem_zalloc(hsize * sizeof (void*), KM_NOSLEEP); #endif if (buf_hash_table.ht_table == NULL) { ASSERT(hsize > (1ULL << 8)); hsize >>= 1; goto retry; } hdr_full_cache = kmem_cache_create("arc_buf_hdr_t_full", HDR_FULL_SIZE, 0, hdr_full_cons, hdr_full_dest, NULL, NULL, NULL, 0); hdr_l2only_cache = kmem_cache_create("arc_buf_hdr_t_l2only", HDR_L2ONLY_SIZE, 0, hdr_l2only_cons, hdr_l2only_dest, NULL, NULL, NULL, 0); buf_cache = kmem_cache_create("arc_buf_t", sizeof (arc_buf_t), 0, buf_cons, buf_dest, NULL, NULL, NULL, 0); for (i = 0; i < 256; i++) for (ct = zfs_crc64_table + i, *ct = i, j = 8; j > 0; j--) *ct = (*ct >> 1) ^ (-(*ct & 1) & ZFS_CRC64_POLY); for (i = 0; i < BUF_LOCKS; i++) mutex_init(BUF_HASH_LOCK(i), NULL, MUTEX_DEFAULT, NULL); } #define ARC_MINTIME (hz>>4) /* 62 ms */ /* * This is the size that the buf occupies in memory. If the buf is compressed, * it will correspond to the compressed size. You should use this method of * getting the buf size unless you explicitly need the logical size. */ uint64_t arc_buf_size(arc_buf_t *buf) { return (ARC_BUF_COMPRESSED(buf) ? HDR_GET_PSIZE(buf->b_hdr) : HDR_GET_LSIZE(buf->b_hdr)); } uint64_t arc_buf_lsize(arc_buf_t *buf) { return (HDR_GET_LSIZE(buf->b_hdr)); } /* * This function will return B_TRUE if the buffer is encrypted in memory. * This buffer can be decrypted by calling arc_untransform(). */ boolean_t arc_is_encrypted(arc_buf_t *buf) { return (ARC_BUF_ENCRYPTED(buf) != 0); } /* * Returns B_TRUE if the buffer represents data that has not had its MAC * verified yet. */ boolean_t arc_is_unauthenticated(arc_buf_t *buf) { return (HDR_NOAUTH(buf->b_hdr) != 0); } void arc_get_raw_params(arc_buf_t *buf, boolean_t *byteorder, uint8_t *salt, uint8_t *iv, uint8_t *mac) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT(HDR_PROTECTED(hdr)); memcpy(salt, hdr->b_crypt_hdr.b_salt, ZIO_DATA_SALT_LEN); memcpy(iv, hdr->b_crypt_hdr.b_iv, ZIO_DATA_IV_LEN); memcpy(mac, hdr->b_crypt_hdr.b_mac, ZIO_DATA_MAC_LEN); *byteorder = (hdr->b_l1hdr.b_byteswap == DMU_BSWAP_NUMFUNCS) ? ZFS_HOST_BYTEORDER : !ZFS_HOST_BYTEORDER; } /* * Indicates how this buffer is compressed in memory. If it is not compressed * the value will be ZIO_COMPRESS_OFF. It can be made normally readable with * arc_untransform() as long as it is also unencrypted. */ enum zio_compress arc_get_compression(arc_buf_t *buf) { return (ARC_BUF_COMPRESSED(buf) ? HDR_GET_COMPRESS(buf->b_hdr) : ZIO_COMPRESS_OFF); } /* * Return the compression algorithm used to store this data in the ARC. If ARC * compression is enabled or this is an encrypted block, this will be the same * as what's used to store it on-disk. Otherwise, this will be ZIO_COMPRESS_OFF. */ static inline enum zio_compress arc_hdr_get_compress(arc_buf_hdr_t *hdr) { return (HDR_COMPRESSION_ENABLED(hdr) ? HDR_GET_COMPRESS(hdr) : ZIO_COMPRESS_OFF); } uint8_t arc_get_complevel(arc_buf_t *buf) { return (buf->b_hdr->b_complevel); } static inline boolean_t arc_buf_is_shared(arc_buf_t *buf) { boolean_t shared = (buf->b_data != NULL && buf->b_hdr->b_l1hdr.b_pabd != NULL && abd_is_linear(buf->b_hdr->b_l1hdr.b_pabd) && buf->b_data == abd_to_buf(buf->b_hdr->b_l1hdr.b_pabd)); IMPLY(shared, HDR_SHARED_DATA(buf->b_hdr)); EQUIV(shared, ARC_BUF_SHARED(buf)); IMPLY(shared, ARC_BUF_COMPRESSED(buf) || ARC_BUF_LAST(buf)); /* * It would be nice to assert arc_can_share() too, but the "hdr isn't * already being shared" requirement prevents us from doing that. */ return (shared); } /* * Free the checksum associated with this header. If there is no checksum, this * is a no-op. */ static inline void arc_cksum_free(arc_buf_hdr_t *hdr) { #ifdef ZFS_DEBUG ASSERT(HDR_HAS_L1HDR(hdr)); mutex_enter(&hdr->b_l1hdr.b_freeze_lock); if (hdr->b_l1hdr.b_freeze_cksum != NULL) { kmem_free(hdr->b_l1hdr.b_freeze_cksum, sizeof (zio_cksum_t)); hdr->b_l1hdr.b_freeze_cksum = NULL; } mutex_exit(&hdr->b_l1hdr.b_freeze_lock); #endif } /* * Return true iff at least one of the bufs on hdr is not compressed. * Encrypted buffers count as compressed. */ static boolean_t arc_hdr_has_uncompressed_buf(arc_buf_hdr_t *hdr) { ASSERT(hdr->b_l1hdr.b_state == arc_anon || HDR_EMPTY_OR_LOCKED(hdr)); for (arc_buf_t *b = hdr->b_l1hdr.b_buf; b != NULL; b = b->b_next) { if (!ARC_BUF_COMPRESSED(b)) { return (B_TRUE); } } return (B_FALSE); } /* * If we've turned on the ZFS_DEBUG_MODIFY flag, verify that the buf's data * matches the checksum that is stored in the hdr. If there is no checksum, * or if the buf is compressed, this is a no-op. */ static void arc_cksum_verify(arc_buf_t *buf) { #ifdef ZFS_DEBUG arc_buf_hdr_t *hdr = buf->b_hdr; zio_cksum_t zc; if (!(zfs_flags & ZFS_DEBUG_MODIFY)) return; if (ARC_BUF_COMPRESSED(buf)) return; ASSERT(HDR_HAS_L1HDR(hdr)); mutex_enter(&hdr->b_l1hdr.b_freeze_lock); if (hdr->b_l1hdr.b_freeze_cksum == NULL || HDR_IO_ERROR(hdr)) { mutex_exit(&hdr->b_l1hdr.b_freeze_lock); return; } fletcher_2_native(buf->b_data, arc_buf_size(buf), NULL, &zc); if (!ZIO_CHECKSUM_EQUAL(*hdr->b_l1hdr.b_freeze_cksum, zc)) panic("buffer modified while frozen!"); mutex_exit(&hdr->b_l1hdr.b_freeze_lock); #endif } /* * This function makes the assumption that data stored in the L2ARC * will be transformed exactly as it is in the main pool. Because of * this we can verify the checksum against the reading process's bp. */ static boolean_t arc_cksum_is_equal(arc_buf_hdr_t *hdr, zio_t *zio) { ASSERT(!BP_IS_EMBEDDED(zio->io_bp)); VERIFY3U(BP_GET_PSIZE(zio->io_bp), ==, HDR_GET_PSIZE(hdr)); /* * Block pointers always store the checksum for the logical data. * If the block pointer has the gang bit set, then the checksum * it represents is for the reconstituted data and not for an * individual gang member. The zio pipeline, however, must be able to * determine the checksum of each of the gang constituents so it * treats the checksum comparison differently than what we need * for l2arc blocks. This prevents us from using the * zio_checksum_error() interface directly. Instead we must call the * zio_checksum_error_impl() so that we can ensure the checksum is * generated using the correct checksum algorithm and accounts for the * logical I/O size and not just a gang fragment. */ return (zio_checksum_error_impl(zio->io_spa, zio->io_bp, BP_GET_CHECKSUM(zio->io_bp), zio->io_abd, zio->io_size, zio->io_offset, NULL) == 0); } /* * Given a buf full of data, if ZFS_DEBUG_MODIFY is enabled this computes a * checksum and attaches it to the buf's hdr so that we can ensure that the buf * isn't modified later on. If buf is compressed or there is already a checksum * on the hdr, this is a no-op (we only checksum uncompressed bufs). */ static void arc_cksum_compute(arc_buf_t *buf) { if (!(zfs_flags & ZFS_DEBUG_MODIFY)) return; #ifdef ZFS_DEBUG arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT(HDR_HAS_L1HDR(hdr)); mutex_enter(&hdr->b_l1hdr.b_freeze_lock); if (hdr->b_l1hdr.b_freeze_cksum != NULL || ARC_BUF_COMPRESSED(buf)) { mutex_exit(&hdr->b_l1hdr.b_freeze_lock); return; } ASSERT(!ARC_BUF_ENCRYPTED(buf)); ASSERT(!ARC_BUF_COMPRESSED(buf)); hdr->b_l1hdr.b_freeze_cksum = kmem_alloc(sizeof (zio_cksum_t), KM_SLEEP); fletcher_2_native(buf->b_data, arc_buf_size(buf), NULL, hdr->b_l1hdr.b_freeze_cksum); mutex_exit(&hdr->b_l1hdr.b_freeze_lock); #endif arc_buf_watch(buf); } #ifndef _KERNEL void arc_buf_sigsegv(int sig, siginfo_t *si, void *unused) { (void) sig, (void) unused; panic("Got SIGSEGV at address: 0x%lx\n", (long)si->si_addr); } #endif static void arc_buf_unwatch(arc_buf_t *buf) { #ifndef _KERNEL if (arc_watch) { ASSERT0(mprotect(buf->b_data, arc_buf_size(buf), PROT_READ | PROT_WRITE)); } #else (void) buf; #endif } static void arc_buf_watch(arc_buf_t *buf) { #ifndef _KERNEL if (arc_watch) ASSERT0(mprotect(buf->b_data, arc_buf_size(buf), PROT_READ)); #else (void) buf; #endif } static arc_buf_contents_t arc_buf_type(arc_buf_hdr_t *hdr) { arc_buf_contents_t type; if (HDR_ISTYPE_METADATA(hdr)) { type = ARC_BUFC_METADATA; } else { type = ARC_BUFC_DATA; } VERIFY3U(hdr->b_type, ==, type); return (type); } boolean_t arc_is_metadata(arc_buf_t *buf) { return (HDR_ISTYPE_METADATA(buf->b_hdr) != 0); } static uint32_t arc_bufc_to_flags(arc_buf_contents_t type) { switch (type) { case ARC_BUFC_DATA: /* metadata field is 0 if buffer contains normal data */ return (0); case ARC_BUFC_METADATA: return (ARC_FLAG_BUFC_METADATA); default: break; } panic("undefined ARC buffer type!"); return ((uint32_t)-1); } void arc_buf_thaw(arc_buf_t *buf) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT3P(hdr->b_l1hdr.b_state, ==, arc_anon); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); arc_cksum_verify(buf); /* * Compressed buffers do not manipulate the b_freeze_cksum. */ if (ARC_BUF_COMPRESSED(buf)) return; ASSERT(HDR_HAS_L1HDR(hdr)); arc_cksum_free(hdr); arc_buf_unwatch(buf); } void arc_buf_freeze(arc_buf_t *buf) { if (!(zfs_flags & ZFS_DEBUG_MODIFY)) return; if (ARC_BUF_COMPRESSED(buf)) return; ASSERT(HDR_HAS_L1HDR(buf->b_hdr)); arc_cksum_compute(buf); } /* * The arc_buf_hdr_t's b_flags should never be modified directly. Instead, * the following functions should be used to ensure that the flags are * updated in a thread-safe way. When manipulating the flags either * the hash_lock must be held or the hdr must be undiscoverable. This * ensures that we're not racing with any other threads when updating * the flags. */ static inline void arc_hdr_set_flags(arc_buf_hdr_t *hdr, arc_flags_t flags) { ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); hdr->b_flags |= flags; } static inline void arc_hdr_clear_flags(arc_buf_hdr_t *hdr, arc_flags_t flags) { ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); hdr->b_flags &= ~flags; } /* * Setting the compression bits in the arc_buf_hdr_t's b_flags is * done in a special way since we have to clear and set bits * at the same time. Consumers that wish to set the compression bits * must use this function to ensure that the flags are updated in * thread-safe manner. */ static void arc_hdr_set_compress(arc_buf_hdr_t *hdr, enum zio_compress cmp) { ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); /* * Holes and embedded blocks will always have a psize = 0 so * we ignore the compression of the blkptr and set the * want to uncompress them. Mark them as uncompressed. */ if (!zfs_compressed_arc_enabled || HDR_GET_PSIZE(hdr) == 0) { arc_hdr_clear_flags(hdr, ARC_FLAG_COMPRESSED_ARC); ASSERT(!HDR_COMPRESSION_ENABLED(hdr)); } else { arc_hdr_set_flags(hdr, ARC_FLAG_COMPRESSED_ARC); ASSERT(HDR_COMPRESSION_ENABLED(hdr)); } HDR_SET_COMPRESS(hdr, cmp); ASSERT3U(HDR_GET_COMPRESS(hdr), ==, cmp); } /* * Looks for another buf on the same hdr which has the data decompressed, copies * from it, and returns true. If no such buf exists, returns false. */ static boolean_t arc_buf_try_copy_decompressed_data(arc_buf_t *buf) { arc_buf_hdr_t *hdr = buf->b_hdr; boolean_t copied = B_FALSE; ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT3P(buf->b_data, !=, NULL); ASSERT(!ARC_BUF_COMPRESSED(buf)); for (arc_buf_t *from = hdr->b_l1hdr.b_buf; from != NULL; from = from->b_next) { /* can't use our own data buffer */ if (from == buf) { continue; } if (!ARC_BUF_COMPRESSED(from)) { memcpy(buf->b_data, from->b_data, arc_buf_size(buf)); copied = B_TRUE; break; } } #ifdef ZFS_DEBUG /* * There were no decompressed bufs, so there should not be a * checksum on the hdr either. */ if (zfs_flags & ZFS_DEBUG_MODIFY) EQUIV(!copied, hdr->b_l1hdr.b_freeze_cksum == NULL); #endif return (copied); } /* * Allocates an ARC buf header that's in an evicted & L2-cached state. * This is used during l2arc reconstruction to make empty ARC buffers * which circumvent the regular disk->arc->l2arc path and instead come * into being in the reverse order, i.e. l2arc->arc. */ static arc_buf_hdr_t * arc_buf_alloc_l2only(size_t size, arc_buf_contents_t type, l2arc_dev_t *dev, dva_t dva, uint64_t daddr, int32_t psize, uint64_t birth, enum zio_compress compress, uint8_t complevel, boolean_t protected, boolean_t prefetch, arc_state_type_t arcs_state) { arc_buf_hdr_t *hdr; ASSERT(size != 0); hdr = kmem_cache_alloc(hdr_l2only_cache, KM_SLEEP); hdr->b_birth = birth; hdr->b_type = type; hdr->b_flags = 0; arc_hdr_set_flags(hdr, arc_bufc_to_flags(type) | ARC_FLAG_HAS_L2HDR); HDR_SET_LSIZE(hdr, size); HDR_SET_PSIZE(hdr, psize); arc_hdr_set_compress(hdr, compress); hdr->b_complevel = complevel; if (protected) arc_hdr_set_flags(hdr, ARC_FLAG_PROTECTED); if (prefetch) arc_hdr_set_flags(hdr, ARC_FLAG_PREFETCH); hdr->b_spa = spa_load_guid(dev->l2ad_vdev->vdev_spa); hdr->b_dva = dva; hdr->b_l2hdr.b_dev = dev; hdr->b_l2hdr.b_daddr = daddr; hdr->b_l2hdr.b_arcs_state = arcs_state; return (hdr); } /* * Return the size of the block, b_pabd, that is stored in the arc_buf_hdr_t. */ static uint64_t arc_hdr_size(arc_buf_hdr_t *hdr) { uint64_t size; if (arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF && HDR_GET_PSIZE(hdr) > 0) { size = HDR_GET_PSIZE(hdr); } else { ASSERT3U(HDR_GET_LSIZE(hdr), !=, 0); size = HDR_GET_LSIZE(hdr); } return (size); } static int arc_hdr_authenticate(arc_buf_hdr_t *hdr, spa_t *spa, uint64_t dsobj) { int ret; uint64_t csize; uint64_t lsize = HDR_GET_LSIZE(hdr); uint64_t psize = HDR_GET_PSIZE(hdr); void *tmpbuf = NULL; abd_t *abd = hdr->b_l1hdr.b_pabd; ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); ASSERT(HDR_AUTHENTICATED(hdr)); ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); /* * The MAC is calculated on the compressed data that is stored on disk. * However, if compressed arc is disabled we will only have the * decompressed data available to us now. Compress it into a temporary * abd so we can verify the MAC. The performance overhead of this will * be relatively low, since most objects in an encrypted objset will * be encrypted (instead of authenticated) anyway. */ if (HDR_GET_COMPRESS(hdr) != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr)) { csize = zio_compress_data(HDR_GET_COMPRESS(hdr), hdr->b_l1hdr.b_pabd, &tmpbuf, lsize, hdr->b_complevel); ASSERT3P(tmpbuf, !=, NULL); ASSERT3U(csize, <=, psize); abd = abd_get_from_buf(tmpbuf, lsize); abd_take_ownership_of_buf(abd, B_TRUE); abd_zero_off(abd, csize, psize - csize); } /* * Authentication is best effort. We authenticate whenever the key is * available. If we succeed we clear ARC_FLAG_NOAUTH. */ if (hdr->b_crypt_hdr.b_ot == DMU_OT_OBJSET) { ASSERT3U(HDR_GET_COMPRESS(hdr), ==, ZIO_COMPRESS_OFF); ASSERT3U(lsize, ==, psize); ret = spa_do_crypt_objset_mac_abd(B_FALSE, spa, dsobj, abd, psize, hdr->b_l1hdr.b_byteswap != DMU_BSWAP_NUMFUNCS); } else { ret = spa_do_crypt_mac_abd(B_FALSE, spa, dsobj, abd, psize, hdr->b_crypt_hdr.b_mac); } if (ret == 0) arc_hdr_clear_flags(hdr, ARC_FLAG_NOAUTH); else if (ret != ENOENT) goto error; if (tmpbuf != NULL) abd_free(abd); return (0); error: if (tmpbuf != NULL) abd_free(abd); return (ret); } /* * This function will take a header that only has raw encrypted data in * b_crypt_hdr.b_rabd and decrypt it into a new buffer which is stored in * b_l1hdr.b_pabd. If designated in the header flags, this function will * also decompress the data. */ static int arc_hdr_decrypt(arc_buf_hdr_t *hdr, spa_t *spa, const zbookmark_phys_t *zb) { int ret; abd_t *cabd = NULL; void *tmp = NULL; boolean_t no_crypt = B_FALSE; boolean_t bswap = (hdr->b_l1hdr.b_byteswap != DMU_BSWAP_NUMFUNCS); ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); ASSERT(HDR_ENCRYPTED(hdr)); arc_hdr_alloc_abd(hdr, 0); ret = spa_do_crypt_abd(B_FALSE, spa, zb, hdr->b_crypt_hdr.b_ot, B_FALSE, bswap, hdr->b_crypt_hdr.b_salt, hdr->b_crypt_hdr.b_iv, hdr->b_crypt_hdr.b_mac, HDR_GET_PSIZE(hdr), hdr->b_l1hdr.b_pabd, hdr->b_crypt_hdr.b_rabd, &no_crypt); if (ret != 0) goto error; if (no_crypt) { abd_copy(hdr->b_l1hdr.b_pabd, hdr->b_crypt_hdr.b_rabd, HDR_GET_PSIZE(hdr)); } /* * If this header has disabled arc compression but the b_pabd is * compressed after decrypting it, we need to decompress the newly * decrypted data. */ if (HDR_GET_COMPRESS(hdr) != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr)) { /* * We want to make sure that we are correctly honoring the * zfs_abd_scatter_enabled setting, so we allocate an abd here * and then loan a buffer from it, rather than allocating a * linear buffer and wrapping it in an abd later. */ cabd = arc_get_data_abd(hdr, arc_hdr_size(hdr), hdr, 0); tmp = abd_borrow_buf(cabd, arc_hdr_size(hdr)); ret = zio_decompress_data(HDR_GET_COMPRESS(hdr), hdr->b_l1hdr.b_pabd, tmp, HDR_GET_PSIZE(hdr), HDR_GET_LSIZE(hdr), &hdr->b_complevel); if (ret != 0) { abd_return_buf(cabd, tmp, arc_hdr_size(hdr)); goto error; } abd_return_buf_copy(cabd, tmp, arc_hdr_size(hdr)); arc_free_data_abd(hdr, hdr->b_l1hdr.b_pabd, arc_hdr_size(hdr), hdr); hdr->b_l1hdr.b_pabd = cabd; } return (0); error: arc_hdr_free_abd(hdr, B_FALSE); if (cabd != NULL) arc_free_data_buf(hdr, cabd, arc_hdr_size(hdr), hdr); return (ret); } /* * This function is called during arc_buf_fill() to prepare the header's * abd plaintext pointer for use. This involves authenticated protected * data and decrypting encrypted data into the plaintext abd. */ static int arc_fill_hdr_crypt(arc_buf_hdr_t *hdr, kmutex_t *hash_lock, spa_t *spa, const zbookmark_phys_t *zb, boolean_t noauth) { int ret; ASSERT(HDR_PROTECTED(hdr)); if (hash_lock != NULL) mutex_enter(hash_lock); if (HDR_NOAUTH(hdr) && !noauth) { /* * The caller requested authenticated data but our data has * not been authenticated yet. Verify the MAC now if we can. */ ret = arc_hdr_authenticate(hdr, spa, zb->zb_objset); if (ret != 0) goto error; } else if (HDR_HAS_RABD(hdr) && hdr->b_l1hdr.b_pabd == NULL) { /* * If we only have the encrypted version of the data, but the * unencrypted version was requested we take this opportunity * to store the decrypted version in the header for future use. */ ret = arc_hdr_decrypt(hdr, spa, zb); if (ret != 0) goto error; } ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); if (hash_lock != NULL) mutex_exit(hash_lock); return (0); error: if (hash_lock != NULL) mutex_exit(hash_lock); return (ret); } /* * This function is used by the dbuf code to decrypt bonus buffers in place. * The dbuf code itself doesn't have any locking for decrypting a shared dnode * block, so we use the hash lock here to protect against concurrent calls to * arc_buf_fill(). */ static void arc_buf_untransform_in_place(arc_buf_t *buf) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT(HDR_ENCRYPTED(hdr)); ASSERT3U(hdr->b_crypt_hdr.b_ot, ==, DMU_OT_DNODE); ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); ASSERT3PF(hdr->b_l1hdr.b_pabd, !=, NULL, "hdr %px buf %px", hdr, buf); zio_crypt_copy_dnode_bonus(hdr->b_l1hdr.b_pabd, buf->b_data, arc_buf_size(buf)); buf->b_flags &= ~ARC_BUF_FLAG_ENCRYPTED; buf->b_flags &= ~ARC_BUF_FLAG_COMPRESSED; } /* * Given a buf that has a data buffer attached to it, this function will * efficiently fill the buf with data of the specified compression setting from * the hdr and update the hdr's b_freeze_cksum if necessary. If the buf and hdr * are already sharing a data buf, no copy is performed. * * If the buf is marked as compressed but uncompressed data was requested, this * will allocate a new data buffer for the buf, remove that flag, and fill the * buf with uncompressed data. You can't request a compressed buf on a hdr with * uncompressed data, and (since we haven't added support for it yet) if you * want compressed data your buf must already be marked as compressed and have * the correct-sized data buffer. */ static int arc_buf_fill(arc_buf_t *buf, spa_t *spa, const zbookmark_phys_t *zb, arc_fill_flags_t flags) { int error = 0; arc_buf_hdr_t *hdr = buf->b_hdr; boolean_t hdr_compressed = (arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF); boolean_t compressed = (flags & ARC_FILL_COMPRESSED) != 0; boolean_t encrypted = (flags & ARC_FILL_ENCRYPTED) != 0; dmu_object_byteswap_t bswap = hdr->b_l1hdr.b_byteswap; kmutex_t *hash_lock = (flags & ARC_FILL_LOCKED) ? NULL : HDR_LOCK(hdr); ASSERT3P(buf->b_data, !=, NULL); IMPLY(compressed, hdr_compressed || ARC_BUF_ENCRYPTED(buf)); IMPLY(compressed, ARC_BUF_COMPRESSED(buf)); IMPLY(encrypted, HDR_ENCRYPTED(hdr)); IMPLY(encrypted, ARC_BUF_ENCRYPTED(buf)); IMPLY(encrypted, ARC_BUF_COMPRESSED(buf)); IMPLY(encrypted, !arc_buf_is_shared(buf)); /* * If the caller wanted encrypted data we just need to copy it from * b_rabd and potentially byteswap it. We won't be able to do any * further transforms on it. */ if (encrypted) { ASSERT(HDR_HAS_RABD(hdr)); abd_copy_to_buf(buf->b_data, hdr->b_crypt_hdr.b_rabd, HDR_GET_PSIZE(hdr)); goto byteswap; } /* * Adjust encrypted and authenticated headers to accommodate * the request if needed. Dnode blocks (ARC_FILL_IN_PLACE) are * allowed to fail decryption due to keys not being loaded * without being marked as an IO error. */ if (HDR_PROTECTED(hdr)) { error = arc_fill_hdr_crypt(hdr, hash_lock, spa, zb, !!(flags & ARC_FILL_NOAUTH)); if (error == EACCES && (flags & ARC_FILL_IN_PLACE) != 0) { return (error); } else if (error != 0) { if (hash_lock != NULL) mutex_enter(hash_lock); arc_hdr_set_flags(hdr, ARC_FLAG_IO_ERROR); if (hash_lock != NULL) mutex_exit(hash_lock); return (error); } } /* * There is a special case here for dnode blocks which are * decrypting their bonus buffers. These blocks may request to * be decrypted in-place. This is necessary because there may * be many dnodes pointing into this buffer and there is * currently no method to synchronize replacing the backing * b_data buffer and updating all of the pointers. Here we use * the hash lock to ensure there are no races. If the need * arises for other types to be decrypted in-place, they must * add handling here as well. */ if ((flags & ARC_FILL_IN_PLACE) != 0) { ASSERT(!hdr_compressed); ASSERT(!compressed); ASSERT(!encrypted); if (HDR_ENCRYPTED(hdr) && ARC_BUF_ENCRYPTED(buf)) { ASSERT3U(hdr->b_crypt_hdr.b_ot, ==, DMU_OT_DNODE); if (hash_lock != NULL) mutex_enter(hash_lock); arc_buf_untransform_in_place(buf); if (hash_lock != NULL) mutex_exit(hash_lock); /* Compute the hdr's checksum if necessary */ arc_cksum_compute(buf); } return (0); } if (hdr_compressed == compressed) { if (ARC_BUF_SHARED(buf)) { ASSERT(arc_buf_is_shared(buf)); } else { abd_copy_to_buf(buf->b_data, hdr->b_l1hdr.b_pabd, arc_buf_size(buf)); } } else { ASSERT(hdr_compressed); ASSERT(!compressed); /* * If the buf is sharing its data with the hdr, unlink it and * allocate a new data buffer for the buf. */ if (ARC_BUF_SHARED(buf)) { ASSERTF(ARC_BUF_COMPRESSED(buf), "buf %p was uncompressed", buf); /* We need to give the buf its own b_data */ buf->b_flags &= ~ARC_BUF_FLAG_SHARED; buf->b_data = arc_get_data_buf(hdr, HDR_GET_LSIZE(hdr), buf); arc_hdr_clear_flags(hdr, ARC_FLAG_SHARED_DATA); /* Previously overhead was 0; just add new overhead */ ARCSTAT_INCR(arcstat_overhead_size, HDR_GET_LSIZE(hdr)); } else if (ARC_BUF_COMPRESSED(buf)) { ASSERT(!arc_buf_is_shared(buf)); /* We need to reallocate the buf's b_data */ arc_free_data_buf(hdr, buf->b_data, HDR_GET_PSIZE(hdr), buf); buf->b_data = arc_get_data_buf(hdr, HDR_GET_LSIZE(hdr), buf); /* We increased the size of b_data; update overhead */ ARCSTAT_INCR(arcstat_overhead_size, HDR_GET_LSIZE(hdr) - HDR_GET_PSIZE(hdr)); } /* * Regardless of the buf's previous compression settings, it * should not be compressed at the end of this function. */ buf->b_flags &= ~ARC_BUF_FLAG_COMPRESSED; /* * Try copying the data from another buf which already has a * decompressed version. If that's not possible, it's time to * bite the bullet and decompress the data from the hdr. */ if (arc_buf_try_copy_decompressed_data(buf)) { /* Skip byteswapping and checksumming (already done) */ return (0); } else { error = zio_decompress_data(HDR_GET_COMPRESS(hdr), hdr->b_l1hdr.b_pabd, buf->b_data, HDR_GET_PSIZE(hdr), HDR_GET_LSIZE(hdr), &hdr->b_complevel); /* * Absent hardware errors or software bugs, this should * be impossible, but log it anyway so we can debug it. */ if (error != 0) { zfs_dbgmsg( "hdr %px, compress %d, psize %d, lsize %d", hdr, arc_hdr_get_compress(hdr), HDR_GET_PSIZE(hdr), HDR_GET_LSIZE(hdr)); if (hash_lock != NULL) mutex_enter(hash_lock); arc_hdr_set_flags(hdr, ARC_FLAG_IO_ERROR); if (hash_lock != NULL) mutex_exit(hash_lock); return (SET_ERROR(EIO)); } } } byteswap: /* Byteswap the buf's data if necessary */ if (bswap != DMU_BSWAP_NUMFUNCS) { ASSERT(!HDR_SHARED_DATA(hdr)); ASSERT3U(bswap, <, DMU_BSWAP_NUMFUNCS); dmu_ot_byteswap[bswap].ob_func(buf->b_data, HDR_GET_LSIZE(hdr)); } /* Compute the hdr's checksum if necessary */ arc_cksum_compute(buf); return (0); } /* * If this function is being called to decrypt an encrypted buffer or verify an * authenticated one, the key must be loaded and a mapping must be made * available in the keystore via spa_keystore_create_mapping() or one of its * callers. */ int arc_untransform(arc_buf_t *buf, spa_t *spa, const zbookmark_phys_t *zb, boolean_t in_place) { int ret; arc_fill_flags_t flags = 0; if (in_place) flags |= ARC_FILL_IN_PLACE; ret = arc_buf_fill(buf, spa, zb, flags); if (ret == ECKSUM) { /* * Convert authentication and decryption errors to EIO * (and generate an ereport) before leaving the ARC. */ ret = SET_ERROR(EIO); spa_log_error(spa, zb, buf->b_hdr->b_birth); (void) zfs_ereport_post(FM_EREPORT_ZFS_AUTHENTICATION, spa, NULL, zb, NULL, 0); } return (ret); } /* * Increment the amount of evictable space in the arc_state_t's refcount. * We account for the space used by the hdr and the arc buf individually * so that we can add and remove them from the refcount individually. */ static void arc_evictable_space_increment(arc_buf_hdr_t *hdr, arc_state_t *state) { arc_buf_contents_t type = arc_buf_type(hdr); ASSERT(HDR_HAS_L1HDR(hdr)); if (GHOST_STATE(state)) { ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); (void) zfs_refcount_add_many(&state->arcs_esize[type], HDR_GET_LSIZE(hdr), hdr); return; } if (hdr->b_l1hdr.b_pabd != NULL) { (void) zfs_refcount_add_many(&state->arcs_esize[type], arc_hdr_size(hdr), hdr); } if (HDR_HAS_RABD(hdr)) { (void) zfs_refcount_add_many(&state->arcs_esize[type], HDR_GET_PSIZE(hdr), hdr); } for (arc_buf_t *buf = hdr->b_l1hdr.b_buf; buf != NULL; buf = buf->b_next) { if (ARC_BUF_SHARED(buf)) continue; (void) zfs_refcount_add_many(&state->arcs_esize[type], arc_buf_size(buf), buf); } } /* * Decrement the amount of evictable space in the arc_state_t's refcount. * We account for the space used by the hdr and the arc buf individually * so that we can add and remove them from the refcount individually. */ static void arc_evictable_space_decrement(arc_buf_hdr_t *hdr, arc_state_t *state) { arc_buf_contents_t type = arc_buf_type(hdr); ASSERT(HDR_HAS_L1HDR(hdr)); if (GHOST_STATE(state)) { ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); (void) zfs_refcount_remove_many(&state->arcs_esize[type], HDR_GET_LSIZE(hdr), hdr); return; } if (hdr->b_l1hdr.b_pabd != NULL) { (void) zfs_refcount_remove_many(&state->arcs_esize[type], arc_hdr_size(hdr), hdr); } if (HDR_HAS_RABD(hdr)) { (void) zfs_refcount_remove_many(&state->arcs_esize[type], HDR_GET_PSIZE(hdr), hdr); } for (arc_buf_t *buf = hdr->b_l1hdr.b_buf; buf != NULL; buf = buf->b_next) { if (ARC_BUF_SHARED(buf)) continue; (void) zfs_refcount_remove_many(&state->arcs_esize[type], arc_buf_size(buf), buf); } } /* * Add a reference to this hdr indicating that someone is actively * referencing that memory. When the refcount transitions from 0 to 1, * we remove it from the respective arc_state_t list to indicate that * it is not evictable. */ static void add_reference(arc_buf_hdr_t *hdr, const void *tag) { arc_state_t *state = hdr->b_l1hdr.b_state; ASSERT(HDR_HAS_L1HDR(hdr)); if (!HDR_EMPTY(hdr) && !MUTEX_HELD(HDR_LOCK(hdr))) { ASSERT(state == arc_anon); ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); } if ((zfs_refcount_add(&hdr->b_l1hdr.b_refcnt, tag) == 1) && state != arc_anon && state != arc_l2c_only) { /* We don't use the L2-only state list. */ multilist_remove(&state->arcs_list[arc_buf_type(hdr)], hdr); arc_evictable_space_decrement(hdr, state); } } /* * Remove a reference from this hdr. When the reference transitions from * 1 to 0 and we're not anonymous, then we add this hdr to the arc_state_t's * list making it eligible for eviction. */ static int remove_reference(arc_buf_hdr_t *hdr, const void *tag) { int cnt; arc_state_t *state = hdr->b_l1hdr.b_state; ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(state == arc_anon || MUTEX_HELD(HDR_LOCK(hdr))); ASSERT(!GHOST_STATE(state)); /* arc_l2c_only counts as a ghost. */ if ((cnt = zfs_refcount_remove(&hdr->b_l1hdr.b_refcnt, tag)) != 0) return (cnt); if (state == arc_anon) { arc_hdr_destroy(hdr); return (0); } if (state == arc_uncached && !HDR_PREFETCH(hdr)) { arc_change_state(arc_anon, hdr); arc_hdr_destroy(hdr); return (0); } multilist_insert(&state->arcs_list[arc_buf_type(hdr)], hdr); arc_evictable_space_increment(hdr, state); return (0); } /* * Returns detailed information about a specific arc buffer. When the * state_index argument is set the function will calculate the arc header * list position for its arc state. Since this requires a linear traversal * callers are strongly encourage not to do this. However, it can be helpful * for targeted analysis so the functionality is provided. */ void arc_buf_info(arc_buf_t *ab, arc_buf_info_t *abi, int state_index) { (void) state_index; arc_buf_hdr_t *hdr = ab->b_hdr; l1arc_buf_hdr_t *l1hdr = NULL; l2arc_buf_hdr_t *l2hdr = NULL; arc_state_t *state = NULL; memset(abi, 0, sizeof (arc_buf_info_t)); if (hdr == NULL) return; abi->abi_flags = hdr->b_flags; if (HDR_HAS_L1HDR(hdr)) { l1hdr = &hdr->b_l1hdr; state = l1hdr->b_state; } if (HDR_HAS_L2HDR(hdr)) l2hdr = &hdr->b_l2hdr; if (l1hdr) { abi->abi_bufcnt = 0; for (arc_buf_t *buf = l1hdr->b_buf; buf; buf = buf->b_next) abi->abi_bufcnt++; abi->abi_access = l1hdr->b_arc_access; abi->abi_mru_hits = l1hdr->b_mru_hits; abi->abi_mru_ghost_hits = l1hdr->b_mru_ghost_hits; abi->abi_mfu_hits = l1hdr->b_mfu_hits; abi->abi_mfu_ghost_hits = l1hdr->b_mfu_ghost_hits; abi->abi_holds = zfs_refcount_count(&l1hdr->b_refcnt); } if (l2hdr) { abi->abi_l2arc_dattr = l2hdr->b_daddr; abi->abi_l2arc_hits = l2hdr->b_hits; } abi->abi_state_type = state ? state->arcs_state : ARC_STATE_ANON; abi->abi_state_contents = arc_buf_type(hdr); abi->abi_size = arc_hdr_size(hdr); } /* * Move the supplied buffer to the indicated state. The hash lock * for the buffer must be held by the caller. */ static void arc_change_state(arc_state_t *new_state, arc_buf_hdr_t *hdr) { arc_state_t *old_state; int64_t refcnt; boolean_t update_old, update_new; arc_buf_contents_t type = arc_buf_type(hdr); /* * We almost always have an L1 hdr here, since we call arc_hdr_realloc() * in arc_read() when bringing a buffer out of the L2ARC. However, the * L1 hdr doesn't always exist when we change state to arc_anon before * destroying a header, in which case reallocating to add the L1 hdr is * pointless. */ if (HDR_HAS_L1HDR(hdr)) { old_state = hdr->b_l1hdr.b_state; refcnt = zfs_refcount_count(&hdr->b_l1hdr.b_refcnt); update_old = (hdr->b_l1hdr.b_buf != NULL || hdr->b_l1hdr.b_pabd != NULL || HDR_HAS_RABD(hdr)); IMPLY(GHOST_STATE(old_state), hdr->b_l1hdr.b_buf == NULL); IMPLY(GHOST_STATE(new_state), hdr->b_l1hdr.b_buf == NULL); IMPLY(old_state == arc_anon, hdr->b_l1hdr.b_buf == NULL || ARC_BUF_LAST(hdr->b_l1hdr.b_buf)); } else { old_state = arc_l2c_only; refcnt = 0; update_old = B_FALSE; } update_new = update_old; if (GHOST_STATE(old_state)) update_old = B_TRUE; if (GHOST_STATE(new_state)) update_new = B_TRUE; ASSERT(MUTEX_HELD(HDR_LOCK(hdr))); ASSERT3P(new_state, !=, old_state); /* * If this buffer is evictable, transfer it from the * old state list to the new state list. */ if (refcnt == 0) { if (old_state != arc_anon && old_state != arc_l2c_only) { ASSERT(HDR_HAS_L1HDR(hdr)); /* remove_reference() saves on insert. */ if (multilist_link_active(&hdr->b_l1hdr.b_arc_node)) { multilist_remove(&old_state->arcs_list[type], hdr); arc_evictable_space_decrement(hdr, old_state); } } if (new_state != arc_anon && new_state != arc_l2c_only) { /* * An L1 header always exists here, since if we're * moving to some L1-cached state (i.e. not l2c_only or * anonymous), we realloc the header to add an L1hdr * beforehand. */ ASSERT(HDR_HAS_L1HDR(hdr)); multilist_insert(&new_state->arcs_list[type], hdr); arc_evictable_space_increment(hdr, new_state); } } ASSERT(!HDR_EMPTY(hdr)); if (new_state == arc_anon && HDR_IN_HASH_TABLE(hdr)) buf_hash_remove(hdr); /* adjust state sizes (ignore arc_l2c_only) */ if (update_new && new_state != arc_l2c_only) { ASSERT(HDR_HAS_L1HDR(hdr)); if (GHOST_STATE(new_state)) { /* * When moving a header to a ghost state, we first * remove all arc buffers. Thus, we'll have no arc * buffer to use for the reference. As a result, we * use the arc header pointer for the reference. */ (void) zfs_refcount_add_many( &new_state->arcs_size[type], HDR_GET_LSIZE(hdr), hdr); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); } else { /* * Each individual buffer holds a unique reference, * thus we must remove each of these references one * at a time. */ for (arc_buf_t *buf = hdr->b_l1hdr.b_buf; buf != NULL; buf = buf->b_next) { /* * When the arc_buf_t is sharing the data * block with the hdr, the owner of the * reference belongs to the hdr. Only * add to the refcount if the arc_buf_t is * not shared. */ if (ARC_BUF_SHARED(buf)) continue; (void) zfs_refcount_add_many( &new_state->arcs_size[type], arc_buf_size(buf), buf); } if (hdr->b_l1hdr.b_pabd != NULL) { (void) zfs_refcount_add_many( &new_state->arcs_size[type], arc_hdr_size(hdr), hdr); } if (HDR_HAS_RABD(hdr)) { (void) zfs_refcount_add_many( &new_state->arcs_size[type], HDR_GET_PSIZE(hdr), hdr); } } } if (update_old && old_state != arc_l2c_only) { ASSERT(HDR_HAS_L1HDR(hdr)); if (GHOST_STATE(old_state)) { ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); /* * When moving a header off of a ghost state, * the header will not contain any arc buffers. * We use the arc header pointer for the reference * which is exactly what we did when we put the * header on the ghost state. */ (void) zfs_refcount_remove_many( &old_state->arcs_size[type], HDR_GET_LSIZE(hdr), hdr); } else { /* * Each individual buffer holds a unique reference, * thus we must remove each of these references one * at a time. */ for (arc_buf_t *buf = hdr->b_l1hdr.b_buf; buf != NULL; buf = buf->b_next) { /* * When the arc_buf_t is sharing the data * block with the hdr, the owner of the * reference belongs to the hdr. Only * add to the refcount if the arc_buf_t is * not shared. */ if (ARC_BUF_SHARED(buf)) continue; (void) zfs_refcount_remove_many( &old_state->arcs_size[type], arc_buf_size(buf), buf); } ASSERT(hdr->b_l1hdr.b_pabd != NULL || HDR_HAS_RABD(hdr)); if (hdr->b_l1hdr.b_pabd != NULL) { (void) zfs_refcount_remove_many( &old_state->arcs_size[type], arc_hdr_size(hdr), hdr); } if (HDR_HAS_RABD(hdr)) { (void) zfs_refcount_remove_many( &old_state->arcs_size[type], HDR_GET_PSIZE(hdr), hdr); } } } if (HDR_HAS_L1HDR(hdr)) { hdr->b_l1hdr.b_state = new_state; if (HDR_HAS_L2HDR(hdr) && new_state != arc_l2c_only) { l2arc_hdr_arcstats_decrement_state(hdr); hdr->b_l2hdr.b_arcs_state = new_state->arcs_state; l2arc_hdr_arcstats_increment_state(hdr); } } } void arc_space_consume(uint64_t space, arc_space_type_t type) { ASSERT(type >= 0 && type < ARC_SPACE_NUMTYPES); switch (type) { default: break; case ARC_SPACE_DATA: ARCSTAT_INCR(arcstat_data_size, space); break; case ARC_SPACE_META: ARCSTAT_INCR(arcstat_metadata_size, space); break; case ARC_SPACE_BONUS: ARCSTAT_INCR(arcstat_bonus_size, space); break; case ARC_SPACE_DNODE: ARCSTAT_INCR(arcstat_dnode_size, space); break; case ARC_SPACE_DBUF: ARCSTAT_INCR(arcstat_dbuf_size, space); break; case ARC_SPACE_HDRS: ARCSTAT_INCR(arcstat_hdr_size, space); break; case ARC_SPACE_L2HDRS: aggsum_add(&arc_sums.arcstat_l2_hdr_size, space); break; case ARC_SPACE_ABD_CHUNK_WASTE: /* * Note: this includes space wasted by all scatter ABD's, not * just those allocated by the ARC. But the vast majority of * scatter ABD's come from the ARC, because other users are * very short-lived. */ ARCSTAT_INCR(arcstat_abd_chunk_waste_size, space); break; } if (type != ARC_SPACE_DATA && type != ARC_SPACE_ABD_CHUNK_WASTE) ARCSTAT_INCR(arcstat_meta_used, space); aggsum_add(&arc_sums.arcstat_size, space); } void arc_space_return(uint64_t space, arc_space_type_t type) { ASSERT(type >= 0 && type < ARC_SPACE_NUMTYPES); switch (type) { default: break; case ARC_SPACE_DATA: ARCSTAT_INCR(arcstat_data_size, -space); break; case ARC_SPACE_META: ARCSTAT_INCR(arcstat_metadata_size, -space); break; case ARC_SPACE_BONUS: ARCSTAT_INCR(arcstat_bonus_size, -space); break; case ARC_SPACE_DNODE: ARCSTAT_INCR(arcstat_dnode_size, -space); break; case ARC_SPACE_DBUF: ARCSTAT_INCR(arcstat_dbuf_size, -space); break; case ARC_SPACE_HDRS: ARCSTAT_INCR(arcstat_hdr_size, -space); break; case ARC_SPACE_L2HDRS: aggsum_add(&arc_sums.arcstat_l2_hdr_size, -space); break; case ARC_SPACE_ABD_CHUNK_WASTE: ARCSTAT_INCR(arcstat_abd_chunk_waste_size, -space); break; } if (type != ARC_SPACE_DATA && type != ARC_SPACE_ABD_CHUNK_WASTE) ARCSTAT_INCR(arcstat_meta_used, -space); ASSERT(aggsum_compare(&arc_sums.arcstat_size, space) >= 0); aggsum_add(&arc_sums.arcstat_size, -space); } /* * Given a hdr and a buf, returns whether that buf can share its b_data buffer * with the hdr's b_pabd. */ static boolean_t arc_can_share(arc_buf_hdr_t *hdr, arc_buf_t *buf) { /* * The criteria for sharing a hdr's data are: * 1. the buffer is not encrypted * 2. the hdr's compression matches the buf's compression * 3. the hdr doesn't need to be byteswapped * 4. the hdr isn't already being shared * 5. the buf is either compressed or it is the last buf in the hdr list * * Criterion #5 maintains the invariant that shared uncompressed * bufs must be the final buf in the hdr's b_buf list. Reading this, you * might ask, "if a compressed buf is allocated first, won't that be the * last thing in the list?", but in that case it's impossible to create * a shared uncompressed buf anyway (because the hdr must be compressed * to have the compressed buf). You might also think that #3 is * sufficient to make this guarantee, however it's possible * (specifically in the rare L2ARC write race mentioned in * arc_buf_alloc_impl()) there will be an existing uncompressed buf that * is shareable, but wasn't at the time of its allocation. Rather than * allow a new shared uncompressed buf to be created and then shuffle * the list around to make it the last element, this simply disallows * sharing if the new buf isn't the first to be added. */ ASSERT3P(buf->b_hdr, ==, hdr); boolean_t hdr_compressed = arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF; boolean_t buf_compressed = ARC_BUF_COMPRESSED(buf) != 0; return (!ARC_BUF_ENCRYPTED(buf) && buf_compressed == hdr_compressed && hdr->b_l1hdr.b_byteswap == DMU_BSWAP_NUMFUNCS && !HDR_SHARED_DATA(hdr) && (ARC_BUF_LAST(buf) || ARC_BUF_COMPRESSED(buf))); } /* * Allocate a buf for this hdr. If you care about the data that's in the hdr, * or if you want a compressed buffer, pass those flags in. Returns 0 if the * copy was made successfully, or an error code otherwise. */ static int arc_buf_alloc_impl(arc_buf_hdr_t *hdr, spa_t *spa, const zbookmark_phys_t *zb, const void *tag, boolean_t encrypted, boolean_t compressed, boolean_t noauth, boolean_t fill, arc_buf_t **ret) { arc_buf_t *buf; arc_fill_flags_t flags = ARC_FILL_LOCKED; ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT3U(HDR_GET_LSIZE(hdr), >, 0); VERIFY(hdr->b_type == ARC_BUFC_DATA || hdr->b_type == ARC_BUFC_METADATA); ASSERT3P(ret, !=, NULL); ASSERT3P(*ret, ==, NULL); IMPLY(encrypted, compressed); buf = *ret = kmem_cache_alloc(buf_cache, KM_PUSHPAGE); buf->b_hdr = hdr; buf->b_data = NULL; buf->b_next = hdr->b_l1hdr.b_buf; buf->b_flags = 0; add_reference(hdr, tag); /* * We're about to change the hdr's b_flags. We must either * hold the hash_lock or be undiscoverable. */ ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); /* * Only honor requests for compressed bufs if the hdr is actually * compressed. This must be overridden if the buffer is encrypted since * encrypted buffers cannot be decompressed. */ if (encrypted) { buf->b_flags |= ARC_BUF_FLAG_COMPRESSED; buf->b_flags |= ARC_BUF_FLAG_ENCRYPTED; flags |= ARC_FILL_COMPRESSED | ARC_FILL_ENCRYPTED; } else if (compressed && arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF) { buf->b_flags |= ARC_BUF_FLAG_COMPRESSED; flags |= ARC_FILL_COMPRESSED; } if (noauth) { ASSERT0(encrypted); flags |= ARC_FILL_NOAUTH; } /* * If the hdr's data can be shared then we share the data buffer and * set the appropriate bit in the hdr's b_flags to indicate the hdr is * sharing it's b_pabd with the arc_buf_t. Otherwise, we allocate a new * buffer to store the buf's data. * * There are two additional restrictions here because we're sharing * hdr -> buf instead of the usual buf -> hdr. First, the hdr can't be * actively involved in an L2ARC write, because if this buf is used by * an arc_write() then the hdr's data buffer will be released when the * write completes, even though the L2ARC write might still be using it. * Second, the hdr's ABD must be linear so that the buf's user doesn't * need to be ABD-aware. It must be allocated via * zio_[data_]buf_alloc(), not as a page, because we need to be able * to abd_release_ownership_of_buf(), which isn't allowed on "linear * page" buffers because the ABD code needs to handle freeing them * specially. */ boolean_t can_share = arc_can_share(hdr, buf) && !HDR_L2_WRITING(hdr) && hdr->b_l1hdr.b_pabd != NULL && abd_is_linear(hdr->b_l1hdr.b_pabd) && !abd_is_linear_page(hdr->b_l1hdr.b_pabd); /* Set up b_data and sharing */ if (can_share) { buf->b_data = abd_to_buf(hdr->b_l1hdr.b_pabd); buf->b_flags |= ARC_BUF_FLAG_SHARED; arc_hdr_set_flags(hdr, ARC_FLAG_SHARED_DATA); } else { buf->b_data = arc_get_data_buf(hdr, arc_buf_size(buf), buf); ARCSTAT_INCR(arcstat_overhead_size, arc_buf_size(buf)); } VERIFY3P(buf->b_data, !=, NULL); hdr->b_l1hdr.b_buf = buf; /* * If the user wants the data from the hdr, we need to either copy or * decompress the data. */ if (fill) { ASSERT3P(zb, !=, NULL); return (arc_buf_fill(buf, spa, zb, flags)); } return (0); } static const char *arc_onloan_tag = "onloan"; static inline void arc_loaned_bytes_update(int64_t delta) { atomic_add_64(&arc_loaned_bytes, delta); /* assert that it did not wrap around */ ASSERT3S(atomic_add_64_nv(&arc_loaned_bytes, 0), >=, 0); } /* * Loan out an anonymous arc buffer. Loaned buffers are not counted as in * flight data by arc_tempreserve_space() until they are "returned". Loaned * buffers must be returned to the arc before they can be used by the DMU or * freed. */ arc_buf_t * arc_loan_buf(spa_t *spa, boolean_t is_metadata, int size) { arc_buf_t *buf = arc_alloc_buf(spa, arc_onloan_tag, is_metadata ? ARC_BUFC_METADATA : ARC_BUFC_DATA, size); arc_loaned_bytes_update(arc_buf_size(buf)); return (buf); } arc_buf_t * arc_loan_compressed_buf(spa_t *spa, uint64_t psize, uint64_t lsize, enum zio_compress compression_type, uint8_t complevel) { arc_buf_t *buf = arc_alloc_compressed_buf(spa, arc_onloan_tag, psize, lsize, compression_type, complevel); arc_loaned_bytes_update(arc_buf_size(buf)); return (buf); } arc_buf_t * arc_loan_raw_buf(spa_t *spa, uint64_t dsobj, boolean_t byteorder, const uint8_t *salt, const uint8_t *iv, const uint8_t *mac, dmu_object_type_t ot, uint64_t psize, uint64_t lsize, enum zio_compress compression_type, uint8_t complevel) { arc_buf_t *buf = arc_alloc_raw_buf(spa, arc_onloan_tag, dsobj, byteorder, salt, iv, mac, ot, psize, lsize, compression_type, complevel); atomic_add_64(&arc_loaned_bytes, psize); return (buf); } /* * Return a loaned arc buffer to the arc. */ void arc_return_buf(arc_buf_t *buf, const void *tag) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT3P(buf->b_data, !=, NULL); ASSERT(HDR_HAS_L1HDR(hdr)); (void) zfs_refcount_add(&hdr->b_l1hdr.b_refcnt, tag); (void) zfs_refcount_remove(&hdr->b_l1hdr.b_refcnt, arc_onloan_tag); arc_loaned_bytes_update(-arc_buf_size(buf)); } /* Detach an arc_buf from a dbuf (tag) */ void arc_loan_inuse_buf(arc_buf_t *buf, const void *tag) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT3P(buf->b_data, !=, NULL); ASSERT(HDR_HAS_L1HDR(hdr)); (void) zfs_refcount_add(&hdr->b_l1hdr.b_refcnt, arc_onloan_tag); (void) zfs_refcount_remove(&hdr->b_l1hdr.b_refcnt, tag); arc_loaned_bytes_update(arc_buf_size(buf)); } static void l2arc_free_abd_on_write(abd_t *abd, size_t size, arc_buf_contents_t type) { l2arc_data_free_t *df = kmem_alloc(sizeof (*df), KM_SLEEP); df->l2df_abd = abd; df->l2df_size = size; df->l2df_type = type; mutex_enter(&l2arc_free_on_write_mtx); list_insert_head(l2arc_free_on_write, df); mutex_exit(&l2arc_free_on_write_mtx); } static void arc_hdr_free_on_write(arc_buf_hdr_t *hdr, boolean_t free_rdata) { arc_state_t *state = hdr->b_l1hdr.b_state; arc_buf_contents_t type = arc_buf_type(hdr); uint64_t size = (free_rdata) ? HDR_GET_PSIZE(hdr) : arc_hdr_size(hdr); /* protected by hash lock, if in the hash table */ if (multilist_link_active(&hdr->b_l1hdr.b_arc_node)) { ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); ASSERT(state != arc_anon && state != arc_l2c_only); (void) zfs_refcount_remove_many(&state->arcs_esize[type], size, hdr); } (void) zfs_refcount_remove_many(&state->arcs_size[type], size, hdr); if (type == ARC_BUFC_METADATA) { arc_space_return(size, ARC_SPACE_META); } else { ASSERT(type == ARC_BUFC_DATA); arc_space_return(size, ARC_SPACE_DATA); } if (free_rdata) { l2arc_free_abd_on_write(hdr->b_crypt_hdr.b_rabd, size, type); } else { l2arc_free_abd_on_write(hdr->b_l1hdr.b_pabd, size, type); } } /* * Share the arc_buf_t's data with the hdr. Whenever we are sharing the * data buffer, we transfer the refcount ownership to the hdr and update * the appropriate kstats. */ static void arc_share_buf(arc_buf_hdr_t *hdr, arc_buf_t *buf) { ASSERT(arc_can_share(hdr, buf)); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!ARC_BUF_ENCRYPTED(buf)); ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); /* * Start sharing the data buffer. We transfer the * refcount ownership to the hdr since it always owns * the refcount whenever an arc_buf_t is shared. */ zfs_refcount_transfer_ownership_many( &hdr->b_l1hdr.b_state->arcs_size[arc_buf_type(hdr)], arc_hdr_size(hdr), buf, hdr); hdr->b_l1hdr.b_pabd = abd_get_from_buf(buf->b_data, arc_buf_size(buf)); abd_take_ownership_of_buf(hdr->b_l1hdr.b_pabd, HDR_ISTYPE_METADATA(hdr)); arc_hdr_set_flags(hdr, ARC_FLAG_SHARED_DATA); buf->b_flags |= ARC_BUF_FLAG_SHARED; /* * Since we've transferred ownership to the hdr we need * to increment its compressed and uncompressed kstats and * decrement the overhead size. */ ARCSTAT_INCR(arcstat_compressed_size, arc_hdr_size(hdr)); ARCSTAT_INCR(arcstat_uncompressed_size, HDR_GET_LSIZE(hdr)); ARCSTAT_INCR(arcstat_overhead_size, -arc_buf_size(buf)); } static void arc_unshare_buf(arc_buf_hdr_t *hdr, arc_buf_t *buf) { ASSERT(arc_buf_is_shared(buf)); ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); /* * We are no longer sharing this buffer so we need * to transfer its ownership to the rightful owner. */ zfs_refcount_transfer_ownership_many( &hdr->b_l1hdr.b_state->arcs_size[arc_buf_type(hdr)], arc_hdr_size(hdr), hdr, buf); arc_hdr_clear_flags(hdr, ARC_FLAG_SHARED_DATA); abd_release_ownership_of_buf(hdr->b_l1hdr.b_pabd); abd_free(hdr->b_l1hdr.b_pabd); hdr->b_l1hdr.b_pabd = NULL; buf->b_flags &= ~ARC_BUF_FLAG_SHARED; /* * Since the buffer is no longer shared between * the arc buf and the hdr, count it as overhead. */ ARCSTAT_INCR(arcstat_compressed_size, -arc_hdr_size(hdr)); ARCSTAT_INCR(arcstat_uncompressed_size, -HDR_GET_LSIZE(hdr)); ARCSTAT_INCR(arcstat_overhead_size, arc_buf_size(buf)); } /* * Remove an arc_buf_t from the hdr's buf list and return the last * arc_buf_t on the list. If no buffers remain on the list then return * NULL. */ static arc_buf_t * arc_buf_remove(arc_buf_hdr_t *hdr, arc_buf_t *buf) { ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); arc_buf_t **bufp = &hdr->b_l1hdr.b_buf; arc_buf_t *lastbuf = NULL; /* * Remove the buf from the hdr list and locate the last * remaining buffer on the list. */ while (*bufp != NULL) { if (*bufp == buf) *bufp = buf->b_next; /* * If we've removed a buffer in the middle of * the list then update the lastbuf and update * bufp. */ if (*bufp != NULL) { lastbuf = *bufp; bufp = &(*bufp)->b_next; } } buf->b_next = NULL; ASSERT3P(lastbuf, !=, buf); IMPLY(lastbuf != NULL, ARC_BUF_LAST(lastbuf)); return (lastbuf); } /* * Free up buf->b_data and pull the arc_buf_t off of the arc_buf_hdr_t's * list and free it. */ static void arc_buf_destroy_impl(arc_buf_t *buf) { arc_buf_hdr_t *hdr = buf->b_hdr; /* * Free up the data associated with the buf but only if we're not * sharing this with the hdr. If we are sharing it with the hdr, the * hdr is responsible for doing the free. */ if (buf->b_data != NULL) { /* * We're about to change the hdr's b_flags. We must either * hold the hash_lock or be undiscoverable. */ ASSERT(HDR_EMPTY_OR_LOCKED(hdr)); arc_cksum_verify(buf); arc_buf_unwatch(buf); if (ARC_BUF_SHARED(buf)) { arc_hdr_clear_flags(hdr, ARC_FLAG_SHARED_DATA); } else { ASSERT(!arc_buf_is_shared(buf)); uint64_t size = arc_buf_size(buf); arc_free_data_buf(hdr, buf->b_data, size, buf); ARCSTAT_INCR(arcstat_overhead_size, -size); } buf->b_data = NULL; /* * If we have no more encrypted buffers and we've already * gotten a copy of the decrypted data we can free b_rabd * to save some space. */ if (ARC_BUF_ENCRYPTED(buf) && HDR_HAS_RABD(hdr) && hdr->b_l1hdr.b_pabd != NULL && !HDR_IO_IN_PROGRESS(hdr)) { arc_buf_t *b; for (b = hdr->b_l1hdr.b_buf; b; b = b->b_next) { if (b != buf && ARC_BUF_ENCRYPTED(b)) break; } if (b == NULL) arc_hdr_free_abd(hdr, B_TRUE); } } arc_buf_t *lastbuf = arc_buf_remove(hdr, buf); if (ARC_BUF_SHARED(buf) && !ARC_BUF_COMPRESSED(buf)) { /* * If the current arc_buf_t is sharing its data buffer with the * hdr, then reassign the hdr's b_pabd to share it with the new * buffer at the end of the list. The shared buffer is always * the last one on the hdr's buffer list. * * There is an equivalent case for compressed bufs, but since * they aren't guaranteed to be the last buf in the list and * that is an exceedingly rare case, we just allow that space be * wasted temporarily. We must also be careful not to share * encrypted buffers, since they cannot be shared. */ if (lastbuf != NULL && !ARC_BUF_ENCRYPTED(lastbuf)) { /* Only one buf can be shared at once */ ASSERT(!arc_buf_is_shared(lastbuf)); /* hdr is uncompressed so can't have compressed buf */ ASSERT(!ARC_BUF_COMPRESSED(lastbuf)); ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); arc_hdr_free_abd(hdr, B_FALSE); /* * We must setup a new shared block between the * last buffer and the hdr. The data would have * been allocated by the arc buf so we need to transfer * ownership to the hdr since it's now being shared. */ arc_share_buf(hdr, lastbuf); } } else if (HDR_SHARED_DATA(hdr)) { /* * Uncompressed shared buffers are always at the end * of the list. Compressed buffers don't have the * same requirements. This makes it hard to * simply assert that the lastbuf is shared so * we rely on the hdr's compression flags to determine * if we have a compressed, shared buffer. */ ASSERT3P(lastbuf, !=, NULL); ASSERT(arc_buf_is_shared(lastbuf) || arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF); } /* * Free the checksum if we're removing the last uncompressed buf from * this hdr. */ if (!arc_hdr_has_uncompressed_buf(hdr)) { arc_cksum_free(hdr); } /* clean up the buf */ buf->b_hdr = NULL; kmem_cache_free(buf_cache, buf); } static void arc_hdr_alloc_abd(arc_buf_hdr_t *hdr, int alloc_flags) { uint64_t size; boolean_t alloc_rdata = ((alloc_flags & ARC_HDR_ALLOC_RDATA) != 0); ASSERT3U(HDR_GET_LSIZE(hdr), >, 0); ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(!HDR_SHARED_DATA(hdr) || alloc_rdata); IMPLY(alloc_rdata, HDR_PROTECTED(hdr)); if (alloc_rdata) { size = HDR_GET_PSIZE(hdr); ASSERT3P(hdr->b_crypt_hdr.b_rabd, ==, NULL); hdr->b_crypt_hdr.b_rabd = arc_get_data_abd(hdr, size, hdr, alloc_flags); ASSERT3P(hdr->b_crypt_hdr.b_rabd, !=, NULL); ARCSTAT_INCR(arcstat_raw_size, size); } else { size = arc_hdr_size(hdr); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); hdr->b_l1hdr.b_pabd = arc_get_data_abd(hdr, size, hdr, alloc_flags); ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); } ARCSTAT_INCR(arcstat_compressed_size, size); ARCSTAT_INCR(arcstat_uncompressed_size, HDR_GET_LSIZE(hdr)); } static void arc_hdr_free_abd(arc_buf_hdr_t *hdr, boolean_t free_rdata) { uint64_t size = (free_rdata) ? HDR_GET_PSIZE(hdr) : arc_hdr_size(hdr); ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(hdr->b_l1hdr.b_pabd != NULL || HDR_HAS_RABD(hdr)); IMPLY(free_rdata, HDR_HAS_RABD(hdr)); /* * If the hdr is currently being written to the l2arc then * we defer freeing the data by adding it to the l2arc_free_on_write * list. The l2arc will free the data once it's finished * writing it to the l2arc device. */ if (HDR_L2_WRITING(hdr)) { arc_hdr_free_on_write(hdr, free_rdata); ARCSTAT_BUMP(arcstat_l2_free_on_write); } else if (free_rdata) { arc_free_data_abd(hdr, hdr->b_crypt_hdr.b_rabd, size, hdr); } else { arc_free_data_abd(hdr, hdr->b_l1hdr.b_pabd, size, hdr); } if (free_rdata) { hdr->b_crypt_hdr.b_rabd = NULL; ARCSTAT_INCR(arcstat_raw_size, -size); } else { hdr->b_l1hdr.b_pabd = NULL; } if (hdr->b_l1hdr.b_pabd == NULL && !HDR_HAS_RABD(hdr)) hdr->b_l1hdr.b_byteswap = DMU_BSWAP_NUMFUNCS; ARCSTAT_INCR(arcstat_compressed_size, -size); ARCSTAT_INCR(arcstat_uncompressed_size, -HDR_GET_LSIZE(hdr)); } /* * Allocate empty anonymous ARC header. The header will get its identity * assigned and buffers attached later as part of read or write operations. * * In case of read arc_read() assigns header its identify (b_dva + b_birth), * inserts it into ARC hash to become globally visible and allocates physical * (b_pabd) or raw (b_rabd) ABD buffer to read into from disk. On disk read * completion arc_read_done() allocates ARC buffer(s) as needed, potentially * sharing one of them with the physical ABD buffer. * * In case of write arc_alloc_buf() allocates ARC buffer to be filled with * data. Then after compression and/or encryption arc_write_ready() allocates * and fills (or potentially shares) physical (b_pabd) or raw (b_rabd) ABD * buffer. On disk write completion arc_write_done() assigns the header its * new identity (b_dva + b_birth) and inserts into ARC hash. * * In case of partial overwrite the old data is read first as described. Then * arc_release() either allocates new anonymous ARC header and moves the ARC * buffer to it, or reuses the old ARC header by discarding its identity and * removing it from ARC hash. After buffer modification normal write process * follows as described. */ static arc_buf_hdr_t * arc_hdr_alloc(uint64_t spa, int32_t psize, int32_t lsize, boolean_t protected, enum zio_compress compression_type, uint8_t complevel, arc_buf_contents_t type) { arc_buf_hdr_t *hdr; VERIFY(type == ARC_BUFC_DATA || type == ARC_BUFC_METADATA); hdr = kmem_cache_alloc(hdr_full_cache, KM_PUSHPAGE); ASSERT(HDR_EMPTY(hdr)); #ifdef ZFS_DEBUG ASSERT3P(hdr->b_l1hdr.b_freeze_cksum, ==, NULL); #endif HDR_SET_PSIZE(hdr, psize); HDR_SET_LSIZE(hdr, lsize); hdr->b_spa = spa; hdr->b_type = type; hdr->b_flags = 0; arc_hdr_set_flags(hdr, arc_bufc_to_flags(type) | ARC_FLAG_HAS_L1HDR); arc_hdr_set_compress(hdr, compression_type); hdr->b_complevel = complevel; if (protected) arc_hdr_set_flags(hdr, ARC_FLAG_PROTECTED); hdr->b_l1hdr.b_state = arc_anon; hdr->b_l1hdr.b_arc_access = 0; hdr->b_l1hdr.b_mru_hits = 0; hdr->b_l1hdr.b_mru_ghost_hits = 0; hdr->b_l1hdr.b_mfu_hits = 0; hdr->b_l1hdr.b_mfu_ghost_hits = 0; hdr->b_l1hdr.b_buf = NULL; ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); return (hdr); } /* * Transition between the two allocation states for the arc_buf_hdr struct. * The arc_buf_hdr struct can be allocated with (hdr_full_cache) or without * (hdr_l2only_cache) the fields necessary for the L1 cache - the smaller * version is used when a cache buffer is only in the L2ARC in order to reduce * memory usage. */ static arc_buf_hdr_t * arc_hdr_realloc(arc_buf_hdr_t *hdr, kmem_cache_t *old, kmem_cache_t *new) { ASSERT(HDR_HAS_L2HDR(hdr)); arc_buf_hdr_t *nhdr; l2arc_dev_t *dev = hdr->b_l2hdr.b_dev; ASSERT((old == hdr_full_cache && new == hdr_l2only_cache) || (old == hdr_l2only_cache && new == hdr_full_cache)); nhdr = kmem_cache_alloc(new, KM_PUSHPAGE); ASSERT(MUTEX_HELD(HDR_LOCK(hdr))); buf_hash_remove(hdr); memcpy(nhdr, hdr, HDR_L2ONLY_SIZE); if (new == hdr_full_cache) { arc_hdr_set_flags(nhdr, ARC_FLAG_HAS_L1HDR); /* * arc_access and arc_change_state need to be aware that a * header has just come out of L2ARC, so we set its state to * l2c_only even though it's about to change. */ nhdr->b_l1hdr.b_state = arc_l2c_only; /* Verify previous threads set to NULL before freeing */ ASSERT3P(nhdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); } else { ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); #ifdef ZFS_DEBUG ASSERT3P(hdr->b_l1hdr.b_freeze_cksum, ==, NULL); #endif /* * If we've reached here, We must have been called from * arc_evict_hdr(), as such we should have already been * removed from any ghost list we were previously on * (which protects us from racing with arc_evict_state), * thus no locking is needed during this check. */ ASSERT(!multilist_link_active(&hdr->b_l1hdr.b_arc_node)); /* * A buffer must not be moved into the arc_l2c_only * state if it's not finished being written out to the * l2arc device. Otherwise, the b_l1hdr.b_pabd field * might try to be accessed, even though it was removed. */ VERIFY(!HDR_L2_WRITING(hdr)); VERIFY3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); arc_hdr_clear_flags(nhdr, ARC_FLAG_HAS_L1HDR); } /* * The header has been reallocated so we need to re-insert it into any * lists it was on. */ (void) buf_hash_insert(nhdr, NULL); ASSERT(list_link_active(&hdr->b_l2hdr.b_l2node)); mutex_enter(&dev->l2ad_mtx); /* * We must place the realloc'ed header back into the list at * the same spot. Otherwise, if it's placed earlier in the list, * l2arc_write_buffers() could find it during the function's * write phase, and try to write it out to the l2arc. */ list_insert_after(&dev->l2ad_buflist, hdr, nhdr); list_remove(&dev->l2ad_buflist, hdr); mutex_exit(&dev->l2ad_mtx); /* * Since we're using the pointer address as the tag when * incrementing and decrementing the l2ad_alloc refcount, we * must remove the old pointer (that we're about to destroy) and * add the new pointer to the refcount. Otherwise we'd remove * the wrong pointer address when calling arc_hdr_destroy() later. */ (void) zfs_refcount_remove_many(&dev->l2ad_alloc, arc_hdr_size(hdr), hdr); (void) zfs_refcount_add_many(&dev->l2ad_alloc, arc_hdr_size(nhdr), nhdr); buf_discard_identity(hdr); kmem_cache_free(old, hdr); return (nhdr); } /* * This function is used by the send / receive code to convert a newly * allocated arc_buf_t to one that is suitable for a raw encrypted write. It * is also used to allow the root objset block to be updated without altering * its embedded MACs. Both block types will always be uncompressed so we do not * have to worry about compression type or psize. */ void arc_convert_to_raw(arc_buf_t *buf, uint64_t dsobj, boolean_t byteorder, dmu_object_type_t ot, const uint8_t *salt, const uint8_t *iv, const uint8_t *mac) { arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT(ot == DMU_OT_DNODE || ot == DMU_OT_OBJSET); ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT3P(hdr->b_l1hdr.b_state, ==, arc_anon); buf->b_flags |= (ARC_BUF_FLAG_COMPRESSED | ARC_BUF_FLAG_ENCRYPTED); arc_hdr_set_flags(hdr, ARC_FLAG_PROTECTED); hdr->b_crypt_hdr.b_dsobj = dsobj; hdr->b_crypt_hdr.b_ot = ot; hdr->b_l1hdr.b_byteswap = (byteorder == ZFS_HOST_BYTEORDER) ? DMU_BSWAP_NUMFUNCS : DMU_OT_BYTESWAP(ot); if (!arc_hdr_has_uncompressed_buf(hdr)) arc_cksum_free(hdr); if (salt != NULL) memcpy(hdr->b_crypt_hdr.b_salt, salt, ZIO_DATA_SALT_LEN); if (iv != NULL) memcpy(hdr->b_crypt_hdr.b_iv, iv, ZIO_DATA_IV_LEN); if (mac != NULL) memcpy(hdr->b_crypt_hdr.b_mac, mac, ZIO_DATA_MAC_LEN); } /* * Allocate a new arc_buf_hdr_t and arc_buf_t and return the buf to the caller. * The buf is returned thawed since we expect the consumer to modify it. */ arc_buf_t * arc_alloc_buf(spa_t *spa, const void *tag, arc_buf_contents_t type, int32_t size) { arc_buf_hdr_t *hdr = arc_hdr_alloc(spa_load_guid(spa), size, size, B_FALSE, ZIO_COMPRESS_OFF, 0, type); arc_buf_t *buf = NULL; VERIFY0(arc_buf_alloc_impl(hdr, spa, NULL, tag, B_FALSE, B_FALSE, B_FALSE, B_FALSE, &buf)); arc_buf_thaw(buf); return (buf); } /* * Allocate a compressed buf in the same manner as arc_alloc_buf. Don't use this * for bufs containing metadata. */ arc_buf_t * arc_alloc_compressed_buf(spa_t *spa, const void *tag, uint64_t psize, uint64_t lsize, enum zio_compress compression_type, uint8_t complevel) { ASSERT3U(lsize, >, 0); ASSERT3U(lsize, >=, psize); ASSERT3U(compression_type, >, ZIO_COMPRESS_OFF); ASSERT3U(compression_type, <, ZIO_COMPRESS_FUNCTIONS); arc_buf_hdr_t *hdr = arc_hdr_alloc(spa_load_guid(spa), psize, lsize, B_FALSE, compression_type, complevel, ARC_BUFC_DATA); arc_buf_t *buf = NULL; VERIFY0(arc_buf_alloc_impl(hdr, spa, NULL, tag, B_FALSE, B_TRUE, B_FALSE, B_FALSE, &buf)); arc_buf_thaw(buf); /* * To ensure that the hdr has the correct data in it if we call * arc_untransform() on this buf before it's been written to disk, * it's easiest if we just set up sharing between the buf and the hdr. */ arc_share_buf(hdr, buf); return (buf); } arc_buf_t * arc_alloc_raw_buf(spa_t *spa, const void *tag, uint64_t dsobj, boolean_t byteorder, const uint8_t *salt, const uint8_t *iv, const uint8_t *mac, dmu_object_type_t ot, uint64_t psize, uint64_t lsize, enum zio_compress compression_type, uint8_t complevel) { arc_buf_hdr_t *hdr; arc_buf_t *buf; arc_buf_contents_t type = DMU_OT_IS_METADATA(ot) ? ARC_BUFC_METADATA : ARC_BUFC_DATA; ASSERT3U(lsize, >, 0); ASSERT3U(lsize, >=, psize); ASSERT3U(compression_type, >=, ZIO_COMPRESS_OFF); ASSERT3U(compression_type, <, ZIO_COMPRESS_FUNCTIONS); hdr = arc_hdr_alloc(spa_load_guid(spa), psize, lsize, B_TRUE, compression_type, complevel, type); hdr->b_crypt_hdr.b_dsobj = dsobj; hdr->b_crypt_hdr.b_ot = ot; hdr->b_l1hdr.b_byteswap = (byteorder == ZFS_HOST_BYTEORDER) ? DMU_BSWAP_NUMFUNCS : DMU_OT_BYTESWAP(ot); memcpy(hdr->b_crypt_hdr.b_salt, salt, ZIO_DATA_SALT_LEN); memcpy(hdr->b_crypt_hdr.b_iv, iv, ZIO_DATA_IV_LEN); memcpy(hdr->b_crypt_hdr.b_mac, mac, ZIO_DATA_MAC_LEN); /* * This buffer will be considered encrypted even if the ot is not an * encrypted type. It will become authenticated instead in * arc_write_ready(). */ buf = NULL; VERIFY0(arc_buf_alloc_impl(hdr, spa, NULL, tag, B_TRUE, B_TRUE, B_FALSE, B_FALSE, &buf)); arc_buf_thaw(buf); return (buf); } static void l2arc_hdr_arcstats_update(arc_buf_hdr_t *hdr, boolean_t incr, boolean_t state_only) { l2arc_buf_hdr_t *l2hdr = &hdr->b_l2hdr; l2arc_dev_t *dev = l2hdr->b_dev; uint64_t lsize = HDR_GET_LSIZE(hdr); uint64_t psize = HDR_GET_PSIZE(hdr); uint64_t asize = vdev_psize_to_asize(dev->l2ad_vdev, psize); arc_buf_contents_t type = hdr->b_type; int64_t lsize_s; int64_t psize_s; int64_t asize_s; if (incr) { lsize_s = lsize; psize_s = psize; asize_s = asize; } else { lsize_s = -lsize; psize_s = -psize; asize_s = -asize; } /* If the buffer is a prefetch, count it as such. */ if (HDR_PREFETCH(hdr)) { ARCSTAT_INCR(arcstat_l2_prefetch_asize, asize_s); } else { /* * We use the value stored in the L2 header upon initial * caching in L2ARC. This value will be updated in case * an MRU/MRU_ghost buffer transitions to MFU but the L2ARC * metadata (log entry) cannot currently be updated. Having * the ARC state in the L2 header solves the problem of a * possibly absent L1 header (apparent in buffers restored * from persistent L2ARC). */ switch (hdr->b_l2hdr.b_arcs_state) { case ARC_STATE_MRU_GHOST: case ARC_STATE_MRU: ARCSTAT_INCR(arcstat_l2_mru_asize, asize_s); break; case ARC_STATE_MFU_GHOST: case ARC_STATE_MFU: ARCSTAT_INCR(arcstat_l2_mfu_asize, asize_s); break; default: break; } } if (state_only) return; ARCSTAT_INCR(arcstat_l2_psize, psize_s); ARCSTAT_INCR(arcstat_l2_lsize, lsize_s); switch (type) { case ARC_BUFC_DATA: ARCSTAT_INCR(arcstat_l2_bufc_data_asize, asize_s); break; case ARC_BUFC_METADATA: ARCSTAT_INCR(arcstat_l2_bufc_metadata_asize, asize_s); break; default: break; } } static void arc_hdr_l2hdr_destroy(arc_buf_hdr_t *hdr) { l2arc_buf_hdr_t *l2hdr = &hdr->b_l2hdr; l2arc_dev_t *dev = l2hdr->b_dev; uint64_t psize = HDR_GET_PSIZE(hdr); uint64_t asize = vdev_psize_to_asize(dev->l2ad_vdev, psize); ASSERT(MUTEX_HELD(&dev->l2ad_mtx)); ASSERT(HDR_HAS_L2HDR(hdr)); list_remove(&dev->l2ad_buflist, hdr); l2arc_hdr_arcstats_decrement(hdr); vdev_space_update(dev->l2ad_vdev, -asize, 0, 0); (void) zfs_refcount_remove_many(&dev->l2ad_alloc, arc_hdr_size(hdr), hdr); arc_hdr_clear_flags(hdr, ARC_FLAG_HAS_L2HDR); } static void arc_hdr_destroy(arc_buf_hdr_t *hdr) { if (HDR_HAS_L1HDR(hdr)) { ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); ASSERT3P(hdr->b_l1hdr.b_state, ==, arc_anon); } ASSERT(!HDR_IO_IN_PROGRESS(hdr)); ASSERT(!HDR_IN_HASH_TABLE(hdr)); if (HDR_HAS_L2HDR(hdr)) { l2arc_dev_t *dev = hdr->b_l2hdr.b_dev; boolean_t buflist_held = MUTEX_HELD(&dev->l2ad_mtx); if (!buflist_held) mutex_enter(&dev->l2ad_mtx); /* * Even though we checked this conditional above, we * need to check this again now that we have the * l2ad_mtx. This is because we could be racing with * another thread calling l2arc_evict() which might have * destroyed this header's L2 portion as we were waiting * to acquire the l2ad_mtx. If that happens, we don't * want to re-destroy the header's L2 portion. */ if (HDR_HAS_L2HDR(hdr)) { if (!HDR_EMPTY(hdr)) buf_discard_identity(hdr); arc_hdr_l2hdr_destroy(hdr); } if (!buflist_held) mutex_exit(&dev->l2ad_mtx); } /* * The header's identify can only be safely discarded once it is no * longer discoverable. This requires removing it from the hash table * and the l2arc header list. After this point the hash lock can not * be used to protect the header. */ if (!HDR_EMPTY(hdr)) buf_discard_identity(hdr); if (HDR_HAS_L1HDR(hdr)) { arc_cksum_free(hdr); while (hdr->b_l1hdr.b_buf != NULL) arc_buf_destroy_impl(hdr->b_l1hdr.b_buf); if (hdr->b_l1hdr.b_pabd != NULL) arc_hdr_free_abd(hdr, B_FALSE); if (HDR_HAS_RABD(hdr)) arc_hdr_free_abd(hdr, B_TRUE); } ASSERT3P(hdr->b_hash_next, ==, NULL); if (HDR_HAS_L1HDR(hdr)) { ASSERT(!multilist_link_active(&hdr->b_l1hdr.b_arc_node)); ASSERT3P(hdr->b_l1hdr.b_acb, ==, NULL); #ifdef ZFS_DEBUG ASSERT3P(hdr->b_l1hdr.b_freeze_cksum, ==, NULL); #endif kmem_cache_free(hdr_full_cache, hdr); } else { kmem_cache_free(hdr_l2only_cache, hdr); } } void arc_buf_destroy(arc_buf_t *buf, const void *tag) { arc_buf_hdr_t *hdr = buf->b_hdr; if (hdr->b_l1hdr.b_state == arc_anon) { ASSERT3P(hdr->b_l1hdr.b_buf, ==, buf); ASSERT(ARC_BUF_LAST(buf)); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); VERIFY0(remove_reference(hdr, tag)); return; } kmutex_t *hash_lock = HDR_LOCK(hdr); mutex_enter(hash_lock); ASSERT3P(hdr, ==, buf->b_hdr); ASSERT3P(hdr->b_l1hdr.b_buf, !=, NULL); ASSERT3P(hash_lock, ==, HDR_LOCK(hdr)); ASSERT3P(hdr->b_l1hdr.b_state, !=, arc_anon); ASSERT3P(buf->b_data, !=, NULL); arc_buf_destroy_impl(buf); (void) remove_reference(hdr, tag); mutex_exit(hash_lock); } /* * Evict the arc_buf_hdr that is provided as a parameter. The resultant * state of the header is dependent on its state prior to entering this * function. The following transitions are possible: * * - arc_mru -> arc_mru_ghost * - arc_mfu -> arc_mfu_ghost * - arc_mru_ghost -> arc_l2c_only * - arc_mru_ghost -> deleted * - arc_mfu_ghost -> arc_l2c_only * - arc_mfu_ghost -> deleted * - arc_uncached -> deleted * * Return total size of evicted data buffers for eviction progress tracking. * When evicting from ghost states return logical buffer size to make eviction * progress at the same (or at least comparable) rate as from non-ghost states. * * Return *real_evicted for actual ARC size reduction to wake up threads * waiting for it. For non-ghost states it includes size of evicted data * buffers (the headers are not freed there). For ghost states it includes * only the evicted headers size. */ static int64_t arc_evict_hdr(arc_buf_hdr_t *hdr, uint64_t *real_evicted) { arc_state_t *evicted_state, *state; int64_t bytes_evicted = 0; uint_t min_lifetime = HDR_PRESCIENT_PREFETCH(hdr) ? arc_min_prescient_prefetch_ms : arc_min_prefetch_ms; ASSERT(MUTEX_HELD(HDR_LOCK(hdr))); ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); ASSERT0(zfs_refcount_count(&hdr->b_l1hdr.b_refcnt)); *real_evicted = 0; state = hdr->b_l1hdr.b_state; if (GHOST_STATE(state)) { /* * l2arc_write_buffers() relies on a header's L1 portion * (i.e. its b_pabd field) during it's write phase. * Thus, we cannot push a header onto the arc_l2c_only * state (removing its L1 piece) until the header is * done being written to the l2arc. */ if (HDR_HAS_L2HDR(hdr) && HDR_L2_WRITING(hdr)) { ARCSTAT_BUMP(arcstat_evict_l2_skip); return (bytes_evicted); } ARCSTAT_BUMP(arcstat_deleted); bytes_evicted += HDR_GET_LSIZE(hdr); DTRACE_PROBE1(arc__delete, arc_buf_hdr_t *, hdr); if (HDR_HAS_L2HDR(hdr)) { ASSERT(hdr->b_l1hdr.b_pabd == NULL); ASSERT(!HDR_HAS_RABD(hdr)); /* * This buffer is cached on the 2nd Level ARC; * don't destroy the header. */ arc_change_state(arc_l2c_only, hdr); /* * dropping from L1+L2 cached to L2-only, * realloc to remove the L1 header. */ (void) arc_hdr_realloc(hdr, hdr_full_cache, hdr_l2only_cache); *real_evicted += HDR_FULL_SIZE - HDR_L2ONLY_SIZE; } else { arc_change_state(arc_anon, hdr); arc_hdr_destroy(hdr); *real_evicted += HDR_FULL_SIZE; } return (bytes_evicted); } ASSERT(state == arc_mru || state == arc_mfu || state == arc_uncached); evicted_state = (state == arc_uncached) ? arc_anon : ((state == arc_mru) ? arc_mru_ghost : arc_mfu_ghost); /* prefetch buffers have a minimum lifespan */ if ((hdr->b_flags & (ARC_FLAG_PREFETCH | ARC_FLAG_INDIRECT)) && ddi_get_lbolt() - hdr->b_l1hdr.b_arc_access < MSEC_TO_TICK(min_lifetime)) { ARCSTAT_BUMP(arcstat_evict_skip); return (bytes_evicted); } if (HDR_HAS_L2HDR(hdr)) { ARCSTAT_INCR(arcstat_evict_l2_cached, HDR_GET_LSIZE(hdr)); } else { if (l2arc_write_eligible(hdr->b_spa, hdr)) { ARCSTAT_INCR(arcstat_evict_l2_eligible, HDR_GET_LSIZE(hdr)); switch (state->arcs_state) { case ARC_STATE_MRU: ARCSTAT_INCR( arcstat_evict_l2_eligible_mru, HDR_GET_LSIZE(hdr)); break; case ARC_STATE_MFU: ARCSTAT_INCR( arcstat_evict_l2_eligible_mfu, HDR_GET_LSIZE(hdr)); break; default: break; } } else { ARCSTAT_INCR(arcstat_evict_l2_ineligible, HDR_GET_LSIZE(hdr)); } } bytes_evicted += arc_hdr_size(hdr); *real_evicted += arc_hdr_size(hdr); /* * If this hdr is being evicted and has a compressed buffer then we * discard it here before we change states. This ensures that the * accounting is updated correctly in arc_free_data_impl(). */ if (hdr->b_l1hdr.b_pabd != NULL) arc_hdr_free_abd(hdr, B_FALSE); if (HDR_HAS_RABD(hdr)) arc_hdr_free_abd(hdr, B_TRUE); arc_change_state(evicted_state, hdr); DTRACE_PROBE1(arc__evict, arc_buf_hdr_t *, hdr); if (evicted_state == arc_anon) { arc_hdr_destroy(hdr); *real_evicted += HDR_FULL_SIZE; } else { ASSERT(HDR_IN_HASH_TABLE(hdr)); } return (bytes_evicted); } static void arc_set_need_free(void) { ASSERT(MUTEX_HELD(&arc_evict_lock)); int64_t remaining = arc_free_memory() - arc_sys_free / 2; arc_evict_waiter_t *aw = list_tail(&arc_evict_waiters); if (aw == NULL) { arc_need_free = MAX(-remaining, 0); } else { arc_need_free = MAX(-remaining, (int64_t)(aw->aew_count - arc_evict_count)); } } static uint64_t arc_evict_state_impl(multilist_t *ml, int idx, arc_buf_hdr_t *marker, uint64_t spa, uint64_t bytes) { multilist_sublist_t *mls; uint64_t bytes_evicted = 0, real_evicted = 0; arc_buf_hdr_t *hdr; kmutex_t *hash_lock; uint_t evict_count = zfs_arc_evict_batch_limit; ASSERT3P(marker, !=, NULL); mls = multilist_sublist_lock_idx(ml, idx); for (hdr = multilist_sublist_prev(mls, marker); likely(hdr != NULL); hdr = multilist_sublist_prev(mls, marker)) { if ((evict_count == 0) || (bytes_evicted >= bytes)) break; /* * To keep our iteration location, move the marker * forward. Since we're not holding hdr's hash lock, we * must be very careful and not remove 'hdr' from the * sublist. Otherwise, other consumers might mistake the * 'hdr' as not being on a sublist when they call the * multilist_link_active() function (they all rely on * the hash lock protecting concurrent insertions and * removals). multilist_sublist_move_forward() was * specifically implemented to ensure this is the case * (only 'marker' will be removed and re-inserted). */ multilist_sublist_move_forward(mls, marker); /* * The only case where the b_spa field should ever be * zero, is the marker headers inserted by * arc_evict_state(). It's possible for multiple threads * to be calling arc_evict_state() concurrently (e.g. * dsl_pool_close() and zio_inject_fault()), so we must * skip any markers we see from these other threads. */ if (hdr->b_spa == 0) continue; /* we're only interested in evicting buffers of a certain spa */ if (spa != 0 && hdr->b_spa != spa) { ARCSTAT_BUMP(arcstat_evict_skip); continue; } hash_lock = HDR_LOCK(hdr); /* * We aren't calling this function from any code path * that would already be holding a hash lock, so we're * asserting on this assumption to be defensive in case * this ever changes. Without this check, it would be * possible to incorrectly increment arcstat_mutex_miss * below (e.g. if the code changed such that we called * this function with a hash lock held). */ ASSERT(!MUTEX_HELD(hash_lock)); if (mutex_tryenter(hash_lock)) { uint64_t revicted; uint64_t evicted = arc_evict_hdr(hdr, &revicted); mutex_exit(hash_lock); bytes_evicted += evicted; real_evicted += revicted; /* * If evicted is zero, arc_evict_hdr() must have * decided to skip this header, don't increment * evict_count in this case. */ if (evicted != 0) evict_count--; } else { ARCSTAT_BUMP(arcstat_mutex_miss); } } multilist_sublist_unlock(mls); /* * Increment the count of evicted bytes, and wake up any threads that * are waiting for the count to reach this value. Since the list is * ordered by ascending aew_count, we pop off the beginning of the * list until we reach the end, or a waiter that's past the current * "count". Doing this outside the loop reduces the number of times * we need to acquire the global arc_evict_lock. * * Only wake when there's sufficient free memory in the system * (specifically, arc_sys_free/2, which by default is a bit more than * 1/64th of RAM). See the comments in arc_wait_for_eviction(). */ mutex_enter(&arc_evict_lock); arc_evict_count += real_evicted; if (arc_free_memory() > arc_sys_free / 2) { arc_evict_waiter_t *aw; while ((aw = list_head(&arc_evict_waiters)) != NULL && aw->aew_count <= arc_evict_count) { list_remove(&arc_evict_waiters, aw); cv_broadcast(&aw->aew_cv); } } arc_set_need_free(); mutex_exit(&arc_evict_lock); /* * If the ARC size is reduced from arc_c_max to arc_c_min (especially * if the average cached block is small), eviction can be on-CPU for * many seconds. To ensure that other threads that may be bound to * this CPU are able to make progress, make a voluntary preemption * call here. */ kpreempt(KPREEMPT_SYNC); return (bytes_evicted); } static arc_buf_hdr_t * arc_state_alloc_marker(void) { arc_buf_hdr_t *marker = kmem_cache_alloc(hdr_full_cache, KM_SLEEP); /* * A b_spa of 0 is used to indicate that this header is * a marker. This fact is used in arc_evict_state_impl(). */ marker->b_spa = 0; return (marker); } static void arc_state_free_marker(arc_buf_hdr_t *marker) { kmem_cache_free(hdr_full_cache, marker); } /* * Allocate an array of buffer headers used as placeholders during arc state * eviction. */ static arc_buf_hdr_t ** arc_state_alloc_markers(int count) { arc_buf_hdr_t **markers; markers = kmem_zalloc(sizeof (*markers) * count, KM_SLEEP); for (int i = 0; i < count; i++) markers[i] = arc_state_alloc_marker(); return (markers); } static void arc_state_free_markers(arc_buf_hdr_t **markers, int count) { for (int i = 0; i < count; i++) arc_state_free_marker(markers[i]); kmem_free(markers, sizeof (*markers) * count); } /* * Evict buffers from the given arc state, until we've removed the * specified number of bytes. Move the removed buffers to the * appropriate evict state. * * This function makes a "best effort". It skips over any buffers * it can't get a hash_lock on, and so, may not catch all candidates. * It may also return without evicting as much space as requested. * * If bytes is specified using the special value ARC_EVICT_ALL, this * will evict all available (i.e. unlocked and evictable) buffers from * the given arc state; which is used by arc_flush(). */ static uint64_t arc_evict_state(arc_state_t *state, arc_buf_contents_t type, uint64_t spa, uint64_t bytes) { uint64_t total_evicted = 0; multilist_t *ml = &state->arcs_list[type]; int num_sublists; arc_buf_hdr_t **markers; num_sublists = multilist_get_num_sublists(ml); /* * If we've tried to evict from each sublist, made some * progress, but still have not hit the target number of bytes * to evict, we want to keep trying. The markers allow us to * pick up where we left off for each individual sublist, rather * than starting from the tail each time. */ if (zthr_iscurthread(arc_evict_zthr)) { markers = arc_state_evict_markers; ASSERT3S(num_sublists, <=, arc_state_evict_marker_count); } else { markers = arc_state_alloc_markers(num_sublists); } for (int i = 0; i < num_sublists; i++) { multilist_sublist_t *mls; mls = multilist_sublist_lock_idx(ml, i); multilist_sublist_insert_tail(mls, markers[i]); multilist_sublist_unlock(mls); } /* * While we haven't hit our target number of bytes to evict, or * we're evicting all available buffers. */ while (total_evicted < bytes) { int sublist_idx = multilist_get_random_index(ml); uint64_t scan_evicted = 0; /* * Start eviction using a randomly selected sublist, * this is to try and evenly balance eviction across all * sublists. Always starting at the same sublist * (e.g. index 0) would cause evictions to favor certain * sublists over others. */ for (int i = 0; i < num_sublists; i++) { uint64_t bytes_remaining; uint64_t bytes_evicted; if (total_evicted < bytes) bytes_remaining = bytes - total_evicted; else break; bytes_evicted = arc_evict_state_impl(ml, sublist_idx, markers[sublist_idx], spa, bytes_remaining); scan_evicted += bytes_evicted; total_evicted += bytes_evicted; /* we've reached the end, wrap to the beginning */ if (++sublist_idx >= num_sublists) sublist_idx = 0; } /* * If we didn't evict anything during this scan, we have * no reason to believe we'll evict more during another * scan, so break the loop. */ if (scan_evicted == 0) { /* This isn't possible, let's make that obvious */ ASSERT3S(bytes, !=, 0); /* * When bytes is ARC_EVICT_ALL, the only way to * break the loop is when scan_evicted is zero. * In that case, we actually have evicted enough, * so we don't want to increment the kstat. */ if (bytes != ARC_EVICT_ALL) { ASSERT3S(total_evicted, <, bytes); ARCSTAT_BUMP(arcstat_evict_not_enough); } break; } } for (int i = 0; i < num_sublists; i++) { multilist_sublist_t *mls = multilist_sublist_lock_idx(ml, i); multilist_sublist_remove(mls, markers[i]); multilist_sublist_unlock(mls); } if (markers != arc_state_evict_markers) arc_state_free_markers(markers, num_sublists); return (total_evicted); } /* * Flush all "evictable" data of the given type from the arc state * specified. This will not evict any "active" buffers (i.e. referenced). * * When 'retry' is set to B_FALSE, the function will make a single pass * over the state and evict any buffers that it can. Since it doesn't * continually retry the eviction, it might end up leaving some buffers * in the ARC due to lock misses. * * When 'retry' is set to B_TRUE, the function will continually retry the * eviction until *all* evictable buffers have been removed from the * state. As a result, if concurrent insertions into the state are * allowed (e.g. if the ARC isn't shutting down), this function might * wind up in an infinite loop, continually trying to evict buffers. */ static uint64_t arc_flush_state(arc_state_t *state, uint64_t spa, arc_buf_contents_t type, boolean_t retry) { uint64_t evicted = 0; while (zfs_refcount_count(&state->arcs_esize[type]) != 0) { evicted += arc_evict_state(state, type, spa, ARC_EVICT_ALL); if (!retry) break; } return (evicted); } /* * Evict the specified number of bytes from the state specified. This * function prevents us from trying to evict more from a state's list * than is "evictable", and to skip evicting altogether when passed a * negative value for "bytes". In contrast, arc_evict_state() will * evict everything it can, when passed a negative value for "bytes". */ static uint64_t arc_evict_impl(arc_state_t *state, arc_buf_contents_t type, int64_t bytes) { uint64_t delta; if (bytes > 0 && zfs_refcount_count(&state->arcs_esize[type]) > 0) { delta = MIN(zfs_refcount_count(&state->arcs_esize[type]), bytes); return (arc_evict_state(state, type, 0, delta)); } return (0); } /* * Adjust specified fraction, taking into account initial ghost state(s) size, * ghost hit bytes towards increasing the fraction, ghost hit bytes towards * decreasing it, plus a balance factor, controlling the decrease rate, used * to balance metadata vs data. */ static uint64_t arc_evict_adj(uint64_t frac, uint64_t total, uint64_t up, uint64_t down, uint_t balance) { if (total < 8 || up + down == 0) return (frac); /* * We should not have more ghost hits than ghost size, but they * may get close. Restrict maximum adjustment in that case. */ if (up + down >= total / 4) { uint64_t scale = (up + down) / (total / 8); up /= scale; down /= scale; } /* Get maximal dynamic range by choosing optimal shifts. */ int s = highbit64(total); s = MIN(64 - s, 32); uint64_t ofrac = (1ULL << 32) - frac; if (frac >= 4 * ofrac) up /= frac / (2 * ofrac + 1); up = (up << s) / (total >> (32 - s)); if (ofrac >= 4 * frac) down /= ofrac / (2 * frac + 1); down = (down << s) / (total >> (32 - s)); down = down * 100 / balance; return (frac + up - down); } /* * Evict buffers from the cache, such that arcstat_size is capped by arc_c. */ static uint64_t arc_evict(void) { uint64_t asize, bytes, total_evicted = 0; int64_t e, mrud, mrum, mfud, mfum, w; static uint64_t ogrd, ogrm, ogfd, ogfm; static uint64_t gsrd, gsrm, gsfd, gsfm; uint64_t ngrd, ngrm, ngfd, ngfm; /* Get current size of ARC states we can evict from. */ mrud = zfs_refcount_count(&arc_mru->arcs_size[ARC_BUFC_DATA]) + zfs_refcount_count(&arc_anon->arcs_size[ARC_BUFC_DATA]); mrum = zfs_refcount_count(&arc_mru->arcs_size[ARC_BUFC_METADATA]) + zfs_refcount_count(&arc_anon->arcs_size[ARC_BUFC_METADATA]); mfud = zfs_refcount_count(&arc_mfu->arcs_size[ARC_BUFC_DATA]); mfum = zfs_refcount_count(&arc_mfu->arcs_size[ARC_BUFC_METADATA]); uint64_t d = mrud + mfud; uint64_t m = mrum + mfum; uint64_t t = d + m; /* Get ARC ghost hits since last eviction. */ ngrd = wmsum_value(&arc_mru_ghost->arcs_hits[ARC_BUFC_DATA]); uint64_t grd = ngrd - ogrd; ogrd = ngrd; ngrm = wmsum_value(&arc_mru_ghost->arcs_hits[ARC_BUFC_METADATA]); uint64_t grm = ngrm - ogrm; ogrm = ngrm; ngfd = wmsum_value(&arc_mfu_ghost->arcs_hits[ARC_BUFC_DATA]); uint64_t gfd = ngfd - ogfd; ogfd = ngfd; ngfm = wmsum_value(&arc_mfu_ghost->arcs_hits[ARC_BUFC_METADATA]); uint64_t gfm = ngfm - ogfm; ogfm = ngfm; /* Adjust ARC states balance based on ghost hits. */ arc_meta = arc_evict_adj(arc_meta, gsrd + gsrm + gsfd + gsfm, grm + gfm, grd + gfd, zfs_arc_meta_balance); arc_pd = arc_evict_adj(arc_pd, gsrd + gsfd, grd, gfd, 100); arc_pm = arc_evict_adj(arc_pm, gsrm + gsfm, grm, gfm, 100); asize = aggsum_value(&arc_sums.arcstat_size); int64_t wt = t - (asize - arc_c); /* * Try to reduce pinned dnodes if more than 3/4 of wanted metadata * target is not evictable or if they go over arc_dnode_limit. */ int64_t prune = 0; int64_t dn = wmsum_value(&arc_sums.arcstat_dnode_size); w = wt * (int64_t)(arc_meta >> 16) >> 16; if (zfs_refcount_count(&arc_mru->arcs_size[ARC_BUFC_METADATA]) + zfs_refcount_count(&arc_mfu->arcs_size[ARC_BUFC_METADATA]) - zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_METADATA]) - zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]) > w * 3 / 4) { prune = dn / sizeof (dnode_t) * zfs_arc_dnode_reduce_percent / 100; } else if (dn > arc_dnode_limit) { prune = (dn - arc_dnode_limit) / sizeof (dnode_t) * zfs_arc_dnode_reduce_percent / 100; } if (prune > 0) arc_prune_async(prune); /* Evict MRU metadata. */ w = wt * (int64_t)(arc_meta * arc_pm >> 48) >> 16; e = MIN((int64_t)(asize - arc_c), (int64_t)(mrum - w)); bytes = arc_evict_impl(arc_mru, ARC_BUFC_METADATA, e); total_evicted += bytes; mrum -= bytes; asize -= bytes; /* Evict MFU metadata. */ w = wt * (int64_t)(arc_meta >> 16) >> 16; e = MIN((int64_t)(asize - arc_c), (int64_t)(m - w)); bytes = arc_evict_impl(arc_mfu, ARC_BUFC_METADATA, e); total_evicted += bytes; mfum -= bytes; asize -= bytes; /* Evict MRU data. */ wt -= m - total_evicted; w = wt * (int64_t)(arc_pd >> 16) >> 16; e = MIN((int64_t)(asize - arc_c), (int64_t)(mrud - w)); bytes = arc_evict_impl(arc_mru, ARC_BUFC_DATA, e); total_evicted += bytes; mrud -= bytes; asize -= bytes; /* Evict MFU data. */ e = asize - arc_c; bytes = arc_evict_impl(arc_mfu, ARC_BUFC_DATA, e); mfud -= bytes; total_evicted += bytes; /* * Evict ghost lists * * Size of each state's ghost list represents how much that state * may grow by shrinking the other states. Would it need to shrink * other states to zero (that is unlikely), its ghost size would be * equal to sum of other three state sizes. But excessive ghost * size may result in false ghost hits (too far back), that may * never result in real cache hits if several states are competing. * So choose some arbitraty point of 1/2 of other state sizes. */ gsrd = (mrum + mfud + mfum) / 2; e = zfs_refcount_count(&arc_mru_ghost->arcs_size[ARC_BUFC_DATA]) - gsrd; (void) arc_evict_impl(arc_mru_ghost, ARC_BUFC_DATA, e); gsrm = (mrud + mfud + mfum) / 2; e = zfs_refcount_count(&arc_mru_ghost->arcs_size[ARC_BUFC_METADATA]) - gsrm; (void) arc_evict_impl(arc_mru_ghost, ARC_BUFC_METADATA, e); gsfd = (mrud + mrum + mfum) / 2; e = zfs_refcount_count(&arc_mfu_ghost->arcs_size[ARC_BUFC_DATA]) - gsfd; (void) arc_evict_impl(arc_mfu_ghost, ARC_BUFC_DATA, e); gsfm = (mrud + mrum + mfud) / 2; e = zfs_refcount_count(&arc_mfu_ghost->arcs_size[ARC_BUFC_METADATA]) - gsfm; (void) arc_evict_impl(arc_mfu_ghost, ARC_BUFC_METADATA, e); return (total_evicted); } void arc_flush(spa_t *spa, boolean_t retry) { uint64_t guid = 0; /* * If retry is B_TRUE, a spa must not be specified since we have * no good way to determine if all of a spa's buffers have been * evicted from an arc state. */ ASSERT(!retry || spa == NULL); if (spa != NULL) guid = spa_load_guid(spa); (void) arc_flush_state(arc_mru, guid, ARC_BUFC_DATA, retry); (void) arc_flush_state(arc_mru, guid, ARC_BUFC_METADATA, retry); (void) arc_flush_state(arc_mfu, guid, ARC_BUFC_DATA, retry); (void) arc_flush_state(arc_mfu, guid, ARC_BUFC_METADATA, retry); (void) arc_flush_state(arc_mru_ghost, guid, ARC_BUFC_DATA, retry); (void) arc_flush_state(arc_mru_ghost, guid, ARC_BUFC_METADATA, retry); (void) arc_flush_state(arc_mfu_ghost, guid, ARC_BUFC_DATA, retry); (void) arc_flush_state(arc_mfu_ghost, guid, ARC_BUFC_METADATA, retry); (void) arc_flush_state(arc_uncached, guid, ARC_BUFC_DATA, retry); (void) arc_flush_state(arc_uncached, guid, ARC_BUFC_METADATA, retry); } -void -arc_reduce_target_size(int64_t to_free) +uint64_t +arc_reduce_target_size(uint64_t to_free) { - uint64_t c = arc_c; - - if (c <= arc_c_min) - return; + /* + * Get the actual arc size. Even if we don't need it, this updates + * the aggsum lower bound estimate for arc_is_overflowing(). + */ + uint64_t asize = aggsum_value(&arc_sums.arcstat_size); /* * All callers want the ARC to actually evict (at least) this much * memory. Therefore we reduce from the lower of the current size and * the target size. This way, even if arc_c is much higher than * arc_size (as can be the case after many calls to arc_freed(), we will * immediately have arc_c < arc_size and therefore the arc_evict_zthr * will evict. */ - uint64_t asize = aggsum_value(&arc_sums.arcstat_size); - if (asize < c) - to_free += c - asize; - arc_c = MAX((int64_t)c - to_free, (int64_t)arc_c_min); + uint64_t c = arc_c; + if (c > arc_c_min) { + c = MIN(c, MAX(asize, arc_c_min)); + to_free = MIN(to_free, c - arc_c_min); + arc_c = c - to_free; + } else { + to_free = 0; + } - /* See comment in arc_evict_cb_check() on why lock+flag */ - mutex_enter(&arc_evict_lock); - arc_evict_needed = B_TRUE; - mutex_exit(&arc_evict_lock); - zthr_wakeup(arc_evict_zthr); + /* + * Whether or not we reduced the target size, request eviction if the + * current size is over it now, since caller obviously wants some RAM. + */ + if (asize > arc_c) { + /* See comment in arc_evict_cb_check() on why lock+flag */ + mutex_enter(&arc_evict_lock); + arc_evict_needed = B_TRUE; + mutex_exit(&arc_evict_lock); + zthr_wakeup(arc_evict_zthr); + } + + return (to_free); } /* * Determine if the system is under memory pressure and is asking * to reclaim memory. A return value of B_TRUE indicates that the system * is under memory pressure and that the arc should adjust accordingly. */ boolean_t arc_reclaim_needed(void) { return (arc_available_memory() < 0); } void arc_kmem_reap_soon(void) { size_t i; kmem_cache_t *prev_cache = NULL; kmem_cache_t *prev_data_cache = NULL; #ifdef _KERNEL #if defined(_ILP32) /* * Reclaim unused memory from all kmem caches. */ kmem_reap(); #endif #endif for (i = 0; i < SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT; i++) { #if defined(_ILP32) /* reach upper limit of cache size on 32-bit */ if (zio_buf_cache[i] == NULL) break; #endif if (zio_buf_cache[i] != prev_cache) { prev_cache = zio_buf_cache[i]; kmem_cache_reap_now(zio_buf_cache[i]); } if (zio_data_buf_cache[i] != prev_data_cache) { prev_data_cache = zio_data_buf_cache[i]; kmem_cache_reap_now(zio_data_buf_cache[i]); } } kmem_cache_reap_now(buf_cache); kmem_cache_reap_now(hdr_full_cache); kmem_cache_reap_now(hdr_l2only_cache); kmem_cache_reap_now(zfs_btree_leaf_cache); abd_cache_reap_now(); } static boolean_t arc_evict_cb_check(void *arg, zthr_t *zthr) { (void) arg, (void) zthr; #ifdef ZFS_DEBUG /* * This is necessary in order to keep the kstat information * up to date for tools that display kstat data such as the * mdb ::arc dcmd and the Linux crash utility. These tools * typically do not call kstat's update function, but simply * dump out stats from the most recent update. Without * this call, these commands may show stale stats for the * anon, mru, mru_ghost, mfu, and mfu_ghost lists. Even * with this call, the data might be out of date if the * evict thread hasn't been woken recently; but that should * suffice. The arc_state_t structures can be queried * directly if more accurate information is needed. */ if (arc_ksp != NULL) arc_ksp->ks_update(arc_ksp, KSTAT_READ); #endif /* * We have to rely on arc_wait_for_eviction() to tell us when to * evict, rather than checking if we are overflowing here, so that we * are sure to not leave arc_wait_for_eviction() waiting on aew_cv. * If we have become "not overflowing" since arc_wait_for_eviction() * checked, we need to wake it up. We could broadcast the CV here, * but arc_wait_for_eviction() may have not yet gone to sleep. We * would need to use a mutex to ensure that this function doesn't * broadcast until arc_wait_for_eviction() has gone to sleep (e.g. * the arc_evict_lock). However, the lock ordering of such a lock * would necessarily be incorrect with respect to the zthr_lock, * which is held before this function is called, and is held by * arc_wait_for_eviction() when it calls zthr_wakeup(). */ if (arc_evict_needed) return (B_TRUE); /* * If we have buffers in uncached state, evict them periodically. */ return ((zfs_refcount_count(&arc_uncached->arcs_esize[ARC_BUFC_DATA]) + zfs_refcount_count(&arc_uncached->arcs_esize[ARC_BUFC_METADATA]) && ddi_get_lbolt() - arc_last_uncached_flush > MSEC_TO_TICK(arc_min_prefetch_ms / 2))); } /* * Keep arc_size under arc_c by running arc_evict which evicts data * from the ARC. */ static void arc_evict_cb(void *arg, zthr_t *zthr) { (void) arg; uint64_t evicted = 0; fstrans_cookie_t cookie = spl_fstrans_mark(); /* Always try to evict from uncached state. */ arc_last_uncached_flush = ddi_get_lbolt(); evicted += arc_flush_state(arc_uncached, 0, ARC_BUFC_DATA, B_FALSE); evicted += arc_flush_state(arc_uncached, 0, ARC_BUFC_METADATA, B_FALSE); /* Evict from other states only if told to. */ if (arc_evict_needed) evicted += arc_evict(); /* * If evicted is zero, we couldn't evict anything * via arc_evict(). This could be due to hash lock * collisions, but more likely due to the majority of * arc buffers being unevictable. Therefore, even if * arc_size is above arc_c, another pass is unlikely to * be helpful and could potentially cause us to enter an * infinite loop. Additionally, zthr_iscancelled() is * checked here so that if the arc is shutting down, the * broadcast will wake any remaining arc evict waiters. * * Note we cancel using zthr instead of arc_evict_zthr * because the latter may not yet be initializd when the * callback is first invoked. */ mutex_enter(&arc_evict_lock); arc_evict_needed = !zthr_iscancelled(zthr) && evicted > 0 && aggsum_compare(&arc_sums.arcstat_size, arc_c) > 0; if (!arc_evict_needed) { /* * We're either no longer overflowing, or we * can't evict anything more, so we should wake * arc_get_data_impl() sooner. */ arc_evict_waiter_t *aw; while ((aw = list_remove_head(&arc_evict_waiters)) != NULL) { cv_broadcast(&aw->aew_cv); } arc_set_need_free(); } mutex_exit(&arc_evict_lock); spl_fstrans_unmark(cookie); } static boolean_t arc_reap_cb_check(void *arg, zthr_t *zthr) { (void) arg, (void) zthr; int64_t free_memory = arc_available_memory(); static int reap_cb_check_counter = 0; /* * If a kmem reap is already active, don't schedule more. We must * check for this because kmem_cache_reap_soon() won't actually * block on the cache being reaped (this is to prevent callers from * becoming implicitly blocked by a system-wide kmem reap -- which, * on a system with many, many full magazines, can take minutes). */ if (!kmem_cache_reap_active() && free_memory < 0) { arc_no_grow = B_TRUE; arc_warm = B_TRUE; /* * Wait at least zfs_grow_retry (default 5) seconds * before considering growing. */ arc_growtime = gethrtime() + SEC2NSEC(arc_grow_retry); return (B_TRUE); } else if (free_memory < arc_c >> arc_no_grow_shift) { arc_no_grow = B_TRUE; } else if (gethrtime() >= arc_growtime) { arc_no_grow = B_FALSE; } /* * Called unconditionally every 60 seconds to reclaim unused * zstd compression and decompression context. This is done * here to avoid the need for an independent thread. */ if (!((reap_cb_check_counter++) % 60)) zfs_zstd_cache_reap_now(); return (B_FALSE); } /* * Keep enough free memory in the system by reaping the ARC's kmem * caches. To cause more slabs to be reapable, we may reduce the * target size of the cache (arc_c), causing the arc_evict_cb() * to free more buffers. */ static void arc_reap_cb(void *arg, zthr_t *zthr) { - (void) arg, (void) zthr; + int64_t can_free, free_memory, to_free; - int64_t free_memory; + (void) arg, (void) zthr; fstrans_cookie_t cookie = spl_fstrans_mark(); /* * Kick off asynchronous kmem_reap()'s of all our caches. */ arc_kmem_reap_soon(); /* * Wait at least arc_kmem_cache_reap_retry_ms between * arc_kmem_reap_soon() calls. Without this check it is possible to * end up in a situation where we spend lots of time reaping * caches, while we're near arc_c_min. Waiting here also gives the * subsequent free memory check a chance of finding that the * asynchronous reap has already freed enough memory, and we don't * need to call arc_reduce_target_size(). */ delay((hz * arc_kmem_cache_reap_retry_ms + 999) / 1000); /* * Reduce the target size as needed to maintain the amount of free * memory in the system at a fraction of the arc_size (1/128th by * default). If oversubscribed (free_memory < 0) then reduce the * target arc_size by the deficit amount plus the fractional * amount. If free memory is positive but less than the fractional * amount, reduce by what is needed to hit the fractional amount. */ free_memory = arc_available_memory(); - - int64_t can_free = arc_c - arc_c_min; - if (can_free > 0) { - int64_t to_free = (can_free >> arc_shrink_shift) - free_memory; - if (to_free > 0) - arc_reduce_target_size(to_free); - } + can_free = arc_c - arc_c_min; + to_free = (MAX(can_free, 0) >> arc_shrink_shift) - free_memory; + if (to_free > 0) + arc_reduce_target_size(to_free); spl_fstrans_unmark(cookie); } #ifdef _KERNEL /* * Determine the amount of memory eligible for eviction contained in the * ARC. All clean data reported by the ghost lists can always be safely * evicted. Due to arc_c_min, the same does not hold for all clean data * contained by the regular mru and mfu lists. * * In the case of the regular mru and mfu lists, we need to report as * much clean data as possible, such that evicting that same reported * data will not bring arc_size below arc_c_min. Thus, in certain * circumstances, the total amount of clean data in the mru and mfu * lists might not actually be evictable. * * The following two distinct cases are accounted for: * * 1. The sum of the amount of dirty data contained by both the mru and * mfu lists, plus the ARC's other accounting (e.g. the anon list), * is greater than or equal to arc_c_min. * (i.e. amount of dirty data >= arc_c_min) * * This is the easy case; all clean data contained by the mru and mfu * lists is evictable. Evicting all clean data can only drop arc_size * to the amount of dirty data, which is greater than arc_c_min. * * 2. The sum of the amount of dirty data contained by both the mru and * mfu lists, plus the ARC's other accounting (e.g. the anon list), * is less than arc_c_min. * (i.e. arc_c_min > amount of dirty data) * * 2.1. arc_size is greater than or equal arc_c_min. * (i.e. arc_size >= arc_c_min > amount of dirty data) * * In this case, not all clean data from the regular mru and mfu * lists is actually evictable; we must leave enough clean data * to keep arc_size above arc_c_min. Thus, the maximum amount of * evictable data from the two lists combined, is exactly the * difference between arc_size and arc_c_min. * * 2.2. arc_size is less than arc_c_min * (i.e. arc_c_min > arc_size > amount of dirty data) * * In this case, none of the data contained in the mru and mfu * lists is evictable, even if it's clean. Since arc_size is * already below arc_c_min, evicting any more would only * increase this negative difference. */ #endif /* _KERNEL */ /* * Adapt arc info given the number of bytes we are trying to add and * the state that we are coming from. This function is only called * when we are adding new content to the cache. */ static void arc_adapt(uint64_t bytes) { /* * Wake reap thread if we do not have any available memory */ if (arc_reclaim_needed()) { zthr_wakeup(arc_reap_zthr); return; } if (arc_no_grow) return; if (arc_c >= arc_c_max) return; /* * If we're within (2 * maxblocksize) bytes of the target * cache size, increment the target cache size */ if (aggsum_upper_bound(&arc_sums.arcstat_size) + 2 * SPA_MAXBLOCKSIZE >= arc_c) { uint64_t dc = MAX(bytes, SPA_OLD_MAXBLOCKSIZE); if (atomic_add_64_nv(&arc_c, dc) > arc_c_max) arc_c = arc_c_max; } } /* - * Check if arc_size has grown past our upper threshold, determined by - * zfs_arc_overflow_shift. + * Check if ARC current size has grown past our upper thresholds. */ static arc_ovf_level_t -arc_is_overflowing(boolean_t use_reserve) +arc_is_overflowing(boolean_t lax, boolean_t use_reserve) { - /* Always allow at least one block of overflow */ - int64_t overflow = MAX(SPA_MAXBLOCKSIZE, - arc_c >> zfs_arc_overflow_shift); - /* * We just compare the lower bound here for performance reasons. Our * primary goals are to make sure that the arc never grows without * bound, and that it can reach its maximum size. This check * accomplishes both goals. The maximum amount we could run over by is * 2 * aggsum_borrow_multiplier * NUM_CPUS * the average size of a block * in the ARC. In practice, that's in the tens of MB, which is low * enough to be safe. */ - int64_t over = aggsum_lower_bound(&arc_sums.arcstat_size) - - arc_c - overflow / 2; - if (!use_reserve) - overflow /= 2; - return (over < 0 ? ARC_OVF_NONE : - over < overflow ? ARC_OVF_SOME : ARC_OVF_SEVERE); + int64_t over = aggsum_lower_bound(&arc_sums.arcstat_size) - arc_c - + zfs_max_recordsize; + + /* Always allow at least one block of overflow. */ + if (over < 0) + return (ARC_OVF_NONE); + + /* If we are under memory pressure, report severe overflow. */ + if (!lax) + return (ARC_OVF_SEVERE); + + /* We are not under pressure, so be more or less relaxed. */ + int64_t overflow = (arc_c >> zfs_arc_overflow_shift) / 2; + if (use_reserve) + overflow *= 3; + return (over < overflow ? ARC_OVF_SOME : ARC_OVF_SEVERE); } static abd_t * arc_get_data_abd(arc_buf_hdr_t *hdr, uint64_t size, const void *tag, int alloc_flags) { arc_buf_contents_t type = arc_buf_type(hdr); arc_get_data_impl(hdr, size, tag, alloc_flags); if (alloc_flags & ARC_HDR_ALLOC_LINEAR) return (abd_alloc_linear(size, type == ARC_BUFC_METADATA)); else return (abd_alloc(size, type == ARC_BUFC_METADATA)); } static void * arc_get_data_buf(arc_buf_hdr_t *hdr, uint64_t size, const void *tag) { arc_buf_contents_t type = arc_buf_type(hdr); arc_get_data_impl(hdr, size, tag, 0); if (type == ARC_BUFC_METADATA) { return (zio_buf_alloc(size)); } else { ASSERT(type == ARC_BUFC_DATA); return (zio_data_buf_alloc(size)); } } /* * Wait for the specified amount of data (in bytes) to be evicted from the - * ARC, and for there to be sufficient free memory in the system. Waiting for - * eviction ensures that the memory used by the ARC decreases. Waiting for - * free memory ensures that the system won't run out of free pages, regardless - * of ARC behavior and settings. See arc_lowmem_init(). + * ARC, and for there to be sufficient free memory in the system. + * The lax argument specifies that caller does not have a specific reason + * to wait, not aware of any memory pressure. Low memory handlers though + * should set it to B_FALSE to wait for all required evictions to complete. + * The use_reserve argument allows some callers to wait less than others + * to not block critical code paths, possibly blocking other resources. */ void -arc_wait_for_eviction(uint64_t amount, boolean_t use_reserve) +arc_wait_for_eviction(uint64_t amount, boolean_t lax, boolean_t use_reserve) { - switch (arc_is_overflowing(use_reserve)) { + switch (arc_is_overflowing(lax, use_reserve)) { case ARC_OVF_NONE: return; case ARC_OVF_SOME: /* * This is a bit racy without taking arc_evict_lock, but the * worst that can happen is we either call zthr_wakeup() extra * time due to race with other thread here, or the set flag * get cleared by arc_evict_cb(), which is unlikely due to * big hysteresis, but also not important since at this level * of overflow the eviction is purely advisory. Same time * taking the global lock here every time without waiting for * the actual eviction creates a significant lock contention. */ if (!arc_evict_needed) { arc_evict_needed = B_TRUE; zthr_wakeup(arc_evict_zthr); } return; case ARC_OVF_SEVERE: default: { arc_evict_waiter_t aw; list_link_init(&aw.aew_node); cv_init(&aw.aew_cv, NULL, CV_DEFAULT, NULL); uint64_t last_count = 0; mutex_enter(&arc_evict_lock); if (!list_is_empty(&arc_evict_waiters)) { arc_evict_waiter_t *last = list_tail(&arc_evict_waiters); last_count = last->aew_count; } else if (!arc_evict_needed) { arc_evict_needed = B_TRUE; zthr_wakeup(arc_evict_zthr); } /* * Note, the last waiter's count may be less than * arc_evict_count if we are low on memory in which * case arc_evict_state_impl() may have deferred * wakeups (but still incremented arc_evict_count). */ aw.aew_count = MAX(last_count, arc_evict_count) + amount; list_insert_tail(&arc_evict_waiters, &aw); arc_set_need_free(); DTRACE_PROBE3(arc__wait__for__eviction, uint64_t, amount, uint64_t, arc_evict_count, uint64_t, aw.aew_count); /* * We will be woken up either when arc_evict_count reaches * aew_count, or when the ARC is no longer overflowing and * eviction completes. * In case of "false" wakeup, we will still be on the list. */ do { cv_wait(&aw.aew_cv, &arc_evict_lock); } while (list_link_active(&aw.aew_node)); mutex_exit(&arc_evict_lock); cv_destroy(&aw.aew_cv); } } } /* * Allocate a block and return it to the caller. If we are hitting the * hard limit for the cache size, we must sleep, waiting for the eviction * thread to catch up. If we're past the target size but below the hard * limit, we'll only signal the reclaim thread and continue on. */ static void arc_get_data_impl(arc_buf_hdr_t *hdr, uint64_t size, const void *tag, int alloc_flags) { arc_adapt(size); /* * If arc_size is currently overflowing, we must be adding data * faster than we are evicting. To ensure we don't compound the * problem by adding more data and forcing arc_size to grow even * further past it's target size, we wait for the eviction thread to * make some progress. We also wait for there to be sufficient free * memory in the system, as measured by arc_free_memory(). * * Specifically, we wait for zfs_arc_eviction_pct percent of the * requested size to be evicted. This should be more than 100%, to * ensure that that progress is also made towards getting arc_size * under arc_c. See the comment above zfs_arc_eviction_pct. */ arc_wait_for_eviction(size * zfs_arc_eviction_pct / 100, - alloc_flags & ARC_HDR_USE_RESERVE); + B_TRUE, alloc_flags & ARC_HDR_USE_RESERVE); arc_buf_contents_t type = arc_buf_type(hdr); if (type == ARC_BUFC_METADATA) { arc_space_consume(size, ARC_SPACE_META); } else { arc_space_consume(size, ARC_SPACE_DATA); } /* * Update the state size. Note that ghost states have a * "ghost size" and so don't need to be updated. */ arc_state_t *state = hdr->b_l1hdr.b_state; if (!GHOST_STATE(state)) { (void) zfs_refcount_add_many(&state->arcs_size[type], size, tag); /* * If this is reached via arc_read, the link is * protected by the hash lock. If reached via * arc_buf_alloc, the header should not be accessed by * any other thread. And, if reached via arc_read_done, * the hash lock will protect it if it's found in the * hash table; otherwise no other thread should be * trying to [add|remove]_reference it. */ if (multilist_link_active(&hdr->b_l1hdr.b_arc_node)) { ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); (void) zfs_refcount_add_many(&state->arcs_esize[type], size, tag); } } } static void arc_free_data_abd(arc_buf_hdr_t *hdr, abd_t *abd, uint64_t size, const void *tag) { arc_free_data_impl(hdr, size, tag); abd_free(abd); } static void arc_free_data_buf(arc_buf_hdr_t *hdr, void *buf, uint64_t size, const void *tag) { arc_buf_contents_t type = arc_buf_type(hdr); arc_free_data_impl(hdr, size, tag); if (type == ARC_BUFC_METADATA) { zio_buf_free(buf, size); } else { ASSERT(type == ARC_BUFC_DATA); zio_data_buf_free(buf, size); } } /* * Free the arc data buffer. */ static void arc_free_data_impl(arc_buf_hdr_t *hdr, uint64_t size, const void *tag) { arc_state_t *state = hdr->b_l1hdr.b_state; arc_buf_contents_t type = arc_buf_type(hdr); /* protected by hash lock, if in the hash table */ if (multilist_link_active(&hdr->b_l1hdr.b_arc_node)) { ASSERT(zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)); ASSERT(state != arc_anon && state != arc_l2c_only); (void) zfs_refcount_remove_many(&state->arcs_esize[type], size, tag); } (void) zfs_refcount_remove_many(&state->arcs_size[type], size, tag); VERIFY3U(hdr->b_type, ==, type); if (type == ARC_BUFC_METADATA) { arc_space_return(size, ARC_SPACE_META); } else { ASSERT(type == ARC_BUFC_DATA); arc_space_return(size, ARC_SPACE_DATA); } } /* * This routine is called whenever a buffer is accessed. */ static void arc_access(arc_buf_hdr_t *hdr, arc_flags_t arc_flags, boolean_t hit) { ASSERT(MUTEX_HELD(HDR_LOCK(hdr))); ASSERT(HDR_HAS_L1HDR(hdr)); /* * Update buffer prefetch status. */ boolean_t was_prefetch = HDR_PREFETCH(hdr); boolean_t now_prefetch = arc_flags & ARC_FLAG_PREFETCH; if (was_prefetch != now_prefetch) { if (was_prefetch) { ARCSTAT_CONDSTAT(hit, demand_hit, demand_iohit, HDR_PRESCIENT_PREFETCH(hdr), prescient, predictive, prefetch); } if (HDR_HAS_L2HDR(hdr)) l2arc_hdr_arcstats_decrement_state(hdr); if (was_prefetch) { arc_hdr_clear_flags(hdr, ARC_FLAG_PREFETCH | ARC_FLAG_PRESCIENT_PREFETCH); } else { arc_hdr_set_flags(hdr, ARC_FLAG_PREFETCH); } if (HDR_HAS_L2HDR(hdr)) l2arc_hdr_arcstats_increment_state(hdr); } if (now_prefetch) { if (arc_flags & ARC_FLAG_PRESCIENT_PREFETCH) { arc_hdr_set_flags(hdr, ARC_FLAG_PRESCIENT_PREFETCH); ARCSTAT_BUMP(arcstat_prescient_prefetch); } else { ARCSTAT_BUMP(arcstat_predictive_prefetch); } } if (arc_flags & ARC_FLAG_L2CACHE) arc_hdr_set_flags(hdr, ARC_FLAG_L2CACHE); clock_t now = ddi_get_lbolt(); if (hdr->b_l1hdr.b_state == arc_anon) { arc_state_t *new_state; /* * This buffer is not in the cache, and does not appear in * our "ghost" lists. Add it to the MRU or uncached state. */ ASSERT0(hdr->b_l1hdr.b_arc_access); hdr->b_l1hdr.b_arc_access = now; if (HDR_UNCACHED(hdr)) { new_state = arc_uncached; DTRACE_PROBE1(new_state__uncached, arc_buf_hdr_t *, hdr); } else { new_state = arc_mru; DTRACE_PROBE1(new_state__mru, arc_buf_hdr_t *, hdr); } arc_change_state(new_state, hdr); } else if (hdr->b_l1hdr.b_state == arc_mru) { /* * This buffer has been accessed once recently and either * its read is still in progress or it is in the cache. */ if (HDR_IO_IN_PROGRESS(hdr)) { hdr->b_l1hdr.b_arc_access = now; return; } hdr->b_l1hdr.b_mru_hits++; ARCSTAT_BUMP(arcstat_mru_hits); /* * If the previous access was a prefetch, then it already * handled possible promotion, so nothing more to do for now. */ if (was_prefetch) { hdr->b_l1hdr.b_arc_access = now; return; } /* * If more than ARC_MINTIME have passed from the previous * hit, promote the buffer to the MFU state. */ if (ddi_time_after(now, hdr->b_l1hdr.b_arc_access + ARC_MINTIME)) { hdr->b_l1hdr.b_arc_access = now; DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, hdr); arc_change_state(arc_mfu, hdr); } } else if (hdr->b_l1hdr.b_state == arc_mru_ghost) { arc_state_t *new_state; /* * This buffer has been accessed once recently, but was * evicted from the cache. Would we have bigger MRU, it * would be an MRU hit, so handle it the same way, except * we don't need to check the previous access time. */ hdr->b_l1hdr.b_mru_ghost_hits++; ARCSTAT_BUMP(arcstat_mru_ghost_hits); hdr->b_l1hdr.b_arc_access = now; wmsum_add(&arc_mru_ghost->arcs_hits[arc_buf_type(hdr)], arc_hdr_size(hdr)); if (was_prefetch) { new_state = arc_mru; DTRACE_PROBE1(new_state__mru, arc_buf_hdr_t *, hdr); } else { new_state = arc_mfu; DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, hdr); } arc_change_state(new_state, hdr); } else if (hdr->b_l1hdr.b_state == arc_mfu) { /* * This buffer has been accessed more than once and either * still in the cache or being restored from one of ghosts. */ if (!HDR_IO_IN_PROGRESS(hdr)) { hdr->b_l1hdr.b_mfu_hits++; ARCSTAT_BUMP(arcstat_mfu_hits); } hdr->b_l1hdr.b_arc_access = now; } else if (hdr->b_l1hdr.b_state == arc_mfu_ghost) { /* * This buffer has been accessed more than once recently, but * has been evicted from the cache. Would we have bigger MFU * it would stay in cache, so move it back to MFU state. */ hdr->b_l1hdr.b_mfu_ghost_hits++; ARCSTAT_BUMP(arcstat_mfu_ghost_hits); hdr->b_l1hdr.b_arc_access = now; wmsum_add(&arc_mfu_ghost->arcs_hits[arc_buf_type(hdr)], arc_hdr_size(hdr)); DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, hdr); arc_change_state(arc_mfu, hdr); } else if (hdr->b_l1hdr.b_state == arc_uncached) { /* * This buffer is uncacheable, but we got a hit. Probably * a demand read after prefetch. Nothing more to do here. */ if (!HDR_IO_IN_PROGRESS(hdr)) ARCSTAT_BUMP(arcstat_uncached_hits); hdr->b_l1hdr.b_arc_access = now; } else if (hdr->b_l1hdr.b_state == arc_l2c_only) { /* * This buffer is on the 2nd Level ARC and was not accessed * for a long time, so treat it as new and put into MRU. */ hdr->b_l1hdr.b_arc_access = now; DTRACE_PROBE1(new_state__mru, arc_buf_hdr_t *, hdr); arc_change_state(arc_mru, hdr); } else { cmn_err(CE_PANIC, "invalid arc state 0x%p", hdr->b_l1hdr.b_state); } } /* * This routine is called by dbuf_hold() to update the arc_access() state * which otherwise would be skipped for entries in the dbuf cache. */ void arc_buf_access(arc_buf_t *buf) { arc_buf_hdr_t *hdr = buf->b_hdr; /* * Avoid taking the hash_lock when possible as an optimization. * The header must be checked again under the hash_lock in order * to handle the case where it is concurrently being released. */ if (hdr->b_l1hdr.b_state == arc_anon || HDR_EMPTY(hdr)) return; kmutex_t *hash_lock = HDR_LOCK(hdr); mutex_enter(hash_lock); if (hdr->b_l1hdr.b_state == arc_anon || HDR_EMPTY(hdr)) { mutex_exit(hash_lock); ARCSTAT_BUMP(arcstat_access_skip); return; } ASSERT(hdr->b_l1hdr.b_state == arc_mru || hdr->b_l1hdr.b_state == arc_mfu || hdr->b_l1hdr.b_state == arc_uncached); DTRACE_PROBE1(arc__hit, arc_buf_hdr_t *, hdr); arc_access(hdr, 0, B_TRUE); mutex_exit(hash_lock); ARCSTAT_BUMP(arcstat_hits); ARCSTAT_CONDSTAT(B_TRUE /* demand */, demand, prefetch, !HDR_ISTYPE_METADATA(hdr), data, metadata, hits); } /* a generic arc_read_done_func_t which you can use */ void arc_bcopy_func(zio_t *zio, const zbookmark_phys_t *zb, const blkptr_t *bp, arc_buf_t *buf, void *arg) { (void) zio, (void) zb, (void) bp; if (buf == NULL) return; memcpy(arg, buf->b_data, arc_buf_size(buf)); arc_buf_destroy(buf, arg); } /* a generic arc_read_done_func_t */ void arc_getbuf_func(zio_t *zio, const zbookmark_phys_t *zb, const blkptr_t *bp, arc_buf_t *buf, void *arg) { (void) zb, (void) bp; arc_buf_t **bufp = arg; if (buf == NULL) { ASSERT(zio == NULL || zio->io_error != 0); *bufp = NULL; } else { ASSERT(zio == NULL || zio->io_error == 0); *bufp = buf; ASSERT(buf->b_data != NULL); } } static void arc_hdr_verify(arc_buf_hdr_t *hdr, blkptr_t *bp) { if (BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp)) { ASSERT3U(HDR_GET_PSIZE(hdr), ==, 0); ASSERT3U(arc_hdr_get_compress(hdr), ==, ZIO_COMPRESS_OFF); } else { if (HDR_COMPRESSION_ENABLED(hdr)) { ASSERT3U(arc_hdr_get_compress(hdr), ==, BP_GET_COMPRESS(bp)); } ASSERT3U(HDR_GET_LSIZE(hdr), ==, BP_GET_LSIZE(bp)); ASSERT3U(HDR_GET_PSIZE(hdr), ==, BP_GET_PSIZE(bp)); ASSERT3U(!!HDR_PROTECTED(hdr), ==, BP_IS_PROTECTED(bp)); } } static void arc_read_done(zio_t *zio) { blkptr_t *bp = zio->io_bp; arc_buf_hdr_t *hdr = zio->io_private; kmutex_t *hash_lock = NULL; arc_callback_t *callback_list; arc_callback_t *acb; /* * The hdr was inserted into hash-table and removed from lists * prior to starting I/O. We should find this header, since * it's in the hash table, and it should be legit since it's * not possible to evict it during the I/O. The only possible * reason for it not to be found is if we were freed during the * read. */ if (HDR_IN_HASH_TABLE(hdr)) { arc_buf_hdr_t *found; ASSERT3U(hdr->b_birth, ==, BP_GET_BIRTH(zio->io_bp)); ASSERT3U(hdr->b_dva.dva_word[0], ==, BP_IDENTITY(zio->io_bp)->dva_word[0]); ASSERT3U(hdr->b_dva.dva_word[1], ==, BP_IDENTITY(zio->io_bp)->dva_word[1]); found = buf_hash_find(hdr->b_spa, zio->io_bp, &hash_lock); ASSERT((found == hdr && DVA_EQUAL(&hdr->b_dva, BP_IDENTITY(zio->io_bp))) || (found == hdr && HDR_L2_READING(hdr))); ASSERT3P(hash_lock, !=, NULL); } if (BP_IS_PROTECTED(bp)) { hdr->b_crypt_hdr.b_ot = BP_GET_TYPE(bp); hdr->b_crypt_hdr.b_dsobj = zio->io_bookmark.zb_objset; zio_crypt_decode_params_bp(bp, hdr->b_crypt_hdr.b_salt, hdr->b_crypt_hdr.b_iv); if (zio->io_error == 0) { if (BP_GET_TYPE(bp) == DMU_OT_INTENT_LOG) { void *tmpbuf; tmpbuf = abd_borrow_buf_copy(zio->io_abd, sizeof (zil_chain_t)); zio_crypt_decode_mac_zil(tmpbuf, hdr->b_crypt_hdr.b_mac); abd_return_buf(zio->io_abd, tmpbuf, sizeof (zil_chain_t)); } else { zio_crypt_decode_mac_bp(bp, hdr->b_crypt_hdr.b_mac); } } } if (zio->io_error == 0) { /* byteswap if necessary */ if (BP_SHOULD_BYTESWAP(zio->io_bp)) { if (BP_GET_LEVEL(zio->io_bp) > 0) { hdr->b_l1hdr.b_byteswap = DMU_BSWAP_UINT64; } else { hdr->b_l1hdr.b_byteswap = DMU_OT_BYTESWAP(BP_GET_TYPE(zio->io_bp)); } } else { hdr->b_l1hdr.b_byteswap = DMU_BSWAP_NUMFUNCS; } if (!HDR_L2_READING(hdr)) { hdr->b_complevel = zio->io_prop.zp_complevel; } } arc_hdr_clear_flags(hdr, ARC_FLAG_L2_EVICTED); if (l2arc_noprefetch && HDR_PREFETCH(hdr)) arc_hdr_clear_flags(hdr, ARC_FLAG_L2CACHE); callback_list = hdr->b_l1hdr.b_acb; ASSERT3P(callback_list, !=, NULL); hdr->b_l1hdr.b_acb = NULL; /* * If a read request has a callback (i.e. acb_done is not NULL), then we * make a buf containing the data according to the parameters which were * passed in. The implementation of arc_buf_alloc_impl() ensures that we * aren't needlessly decompressing the data multiple times. */ int callback_cnt = 0; for (acb = callback_list; acb != NULL; acb = acb->acb_next) { /* We need the last one to call below in original order. */ callback_list = acb; if (!acb->acb_done || acb->acb_nobuf) continue; callback_cnt++; if (zio->io_error != 0) continue; int error = arc_buf_alloc_impl(hdr, zio->io_spa, &acb->acb_zb, acb->acb_private, acb->acb_encrypted, acb->acb_compressed, acb->acb_noauth, B_TRUE, &acb->acb_buf); /* * Assert non-speculative zios didn't fail because an * encryption key wasn't loaded */ ASSERT((zio->io_flags & ZIO_FLAG_SPECULATIVE) || error != EACCES); /* * If we failed to decrypt, report an error now (as the zio * layer would have done if it had done the transforms). */ if (error == ECKSUM) { ASSERT(BP_IS_PROTECTED(bp)); error = SET_ERROR(EIO); if ((zio->io_flags & ZIO_FLAG_SPECULATIVE) == 0) { spa_log_error(zio->io_spa, &acb->acb_zb, BP_GET_LOGICAL_BIRTH(zio->io_bp)); (void) zfs_ereport_post( FM_EREPORT_ZFS_AUTHENTICATION, zio->io_spa, NULL, &acb->acb_zb, zio, 0); } } if (error != 0) { /* * Decompression or decryption failed. Set * io_error so that when we call acb_done * (below), we will indicate that the read * failed. Note that in the unusual case * where one callback is compressed and another * uncompressed, we will mark all of them * as failed, even though the uncompressed * one can't actually fail. In this case, * the hdr will not be anonymous, because * if there are multiple callbacks, it's * because multiple threads found the same * arc buf in the hash table. */ zio->io_error = error; } } /* * If there are multiple callbacks, we must have the hash lock, * because the only way for multiple threads to find this hdr is * in the hash table. This ensures that if there are multiple * callbacks, the hdr is not anonymous. If it were anonymous, * we couldn't use arc_buf_destroy() in the error case below. */ ASSERT(callback_cnt < 2 || hash_lock != NULL); if (zio->io_error == 0) { arc_hdr_verify(hdr, zio->io_bp); } else { arc_hdr_set_flags(hdr, ARC_FLAG_IO_ERROR); if (hdr->b_l1hdr.b_state != arc_anon) arc_change_state(arc_anon, hdr); if (HDR_IN_HASH_TABLE(hdr)) buf_hash_remove(hdr); } arc_hdr_clear_flags(hdr, ARC_FLAG_IO_IN_PROGRESS); (void) remove_reference(hdr, hdr); if (hash_lock != NULL) mutex_exit(hash_lock); /* execute each callback and free its structure */ while ((acb = callback_list) != NULL) { if (acb->acb_done != NULL) { if (zio->io_error != 0 && acb->acb_buf != NULL) { /* * If arc_buf_alloc_impl() fails during * decompression, the buf will still be * allocated, and needs to be freed here. */ arc_buf_destroy(acb->acb_buf, acb->acb_private); acb->acb_buf = NULL; } acb->acb_done(zio, &zio->io_bookmark, zio->io_bp, acb->acb_buf, acb->acb_private); } if (acb->acb_zio_dummy != NULL) { acb->acb_zio_dummy->io_error = zio->io_error; zio_nowait(acb->acb_zio_dummy); } callback_list = acb->acb_prev; if (acb->acb_wait) { mutex_enter(&acb->acb_wait_lock); acb->acb_wait_error = zio->io_error; acb->acb_wait = B_FALSE; cv_signal(&acb->acb_wait_cv); mutex_exit(&acb->acb_wait_lock); /* acb will be freed by the waiting thread. */ } else { kmem_free(acb, sizeof (arc_callback_t)); } } } /* * "Read" the block at the specified DVA (in bp) via the * cache. If the block is found in the cache, invoke the provided * callback immediately and return. Note that the `zio' parameter * in the callback will be NULL in this case, since no IO was * required. If the block is not in the cache pass the read request * on to the spa with a substitute callback function, so that the * requested block will be added to the cache. * * If a read request arrives for a block that has a read in-progress, * either wait for the in-progress read to complete (and return the * results); or, if this is a read with a "done" func, add a record * to the read to invoke the "done" func when the read completes, * and return; or just return. * * arc_read_done() will invoke all the requested "done" functions * for readers of this block. */ int arc_read(zio_t *pio, spa_t *spa, const blkptr_t *bp, arc_read_done_func_t *done, void *private, zio_priority_t priority, int zio_flags, arc_flags_t *arc_flags, const zbookmark_phys_t *zb) { arc_buf_hdr_t *hdr = NULL; kmutex_t *hash_lock = NULL; zio_t *rzio; uint64_t guid = spa_load_guid(spa); boolean_t compressed_read = (zio_flags & ZIO_FLAG_RAW_COMPRESS) != 0; boolean_t encrypted_read = BP_IS_ENCRYPTED(bp) && (zio_flags & ZIO_FLAG_RAW_ENCRYPT) != 0; boolean_t noauth_read = BP_IS_AUTHENTICATED(bp) && (zio_flags & ZIO_FLAG_RAW_ENCRYPT) != 0; boolean_t embedded_bp = !!BP_IS_EMBEDDED(bp); boolean_t no_buf = *arc_flags & ARC_FLAG_NO_BUF; arc_buf_t *buf = NULL; int rc = 0; ASSERT(!embedded_bp || BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA); ASSERT(!BP_IS_HOLE(bp)); ASSERT(!BP_IS_REDACTED(bp)); /* * Normally SPL_FSTRANS will already be set since kernel threads which * expect to call the DMU interfaces will set it when created. System * calls are similarly handled by setting/cleaning the bit in the * registered callback (module/os/.../zfs/zpl_*). * * External consumers such as Lustre which call the exported DMU * interfaces may not have set SPL_FSTRANS. To avoid a deadlock * on the hash_lock always set and clear the bit. */ fstrans_cookie_t cookie = spl_fstrans_mark(); top: /* * Verify the block pointer contents are reasonable. This should * always be the case since the blkptr is protected by a checksum. * However, if there is damage it's desirable to detect this early * and treat it as a checksum error. This allows an alternate blkptr * to be tried when one is available (e.g. ditto blocks). */ if (!zfs_blkptr_verify(spa, bp, (zio_flags & ZIO_FLAG_CONFIG_WRITER) ? BLK_CONFIG_HELD : BLK_CONFIG_NEEDED, BLK_VERIFY_LOG)) { rc = SET_ERROR(ECKSUM); goto done; } if (!embedded_bp) { /* * Embedded BP's have no DVA and require no I/O to "read". * Create an anonymous arc buf to back it. */ hdr = buf_hash_find(guid, bp, &hash_lock); } /* * Determine if we have an L1 cache hit or a cache miss. For simplicity * we maintain encrypted data separately from compressed / uncompressed * data. If the user is requesting raw encrypted data and we don't have * that in the header we will read from disk to guarantee that we can * get it even if the encryption keys aren't loaded. */ if (hdr != NULL && HDR_HAS_L1HDR(hdr) && (HDR_HAS_RABD(hdr) || (hdr->b_l1hdr.b_pabd != NULL && !encrypted_read))) { boolean_t is_data = !HDR_ISTYPE_METADATA(hdr); if (HDR_IO_IN_PROGRESS(hdr)) { if (*arc_flags & ARC_FLAG_CACHED_ONLY) { mutex_exit(hash_lock); ARCSTAT_BUMP(arcstat_cached_only_in_progress); rc = SET_ERROR(ENOENT); goto done; } zio_t *head_zio = hdr->b_l1hdr.b_acb->acb_zio_head; ASSERT3P(head_zio, !=, NULL); if ((hdr->b_flags & ARC_FLAG_PRIO_ASYNC_READ) && priority == ZIO_PRIORITY_SYNC_READ) { /* * This is a sync read that needs to wait for * an in-flight async read. Request that the * zio have its priority upgraded. */ zio_change_priority(head_zio, priority); DTRACE_PROBE1(arc__async__upgrade__sync, arc_buf_hdr_t *, hdr); ARCSTAT_BUMP(arcstat_async_upgrade_sync); } DTRACE_PROBE1(arc__iohit, arc_buf_hdr_t *, hdr); arc_access(hdr, *arc_flags, B_FALSE); /* * If there are multiple threads reading the same block * and that block is not yet in the ARC, then only one * thread will do the physical I/O and all other * threads will wait until that I/O completes. * Synchronous reads use the acb_wait_cv whereas nowait * reads register a callback. Both are signalled/called * in arc_read_done. * * Errors of the physical I/O may need to be propagated. * Synchronous read errors are returned here from * arc_read_done via acb_wait_error. Nowait reads * attach the acb_zio_dummy zio to pio and * arc_read_done propagates the physical I/O's io_error * to acb_zio_dummy, and thereby to pio. */ arc_callback_t *acb = NULL; if (done || pio || *arc_flags & ARC_FLAG_WAIT) { acb = kmem_zalloc(sizeof (arc_callback_t), KM_SLEEP); acb->acb_done = done; acb->acb_private = private; acb->acb_compressed = compressed_read; acb->acb_encrypted = encrypted_read; acb->acb_noauth = noauth_read; acb->acb_nobuf = no_buf; if (*arc_flags & ARC_FLAG_WAIT) { acb->acb_wait = B_TRUE; mutex_init(&acb->acb_wait_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&acb->acb_wait_cv, NULL, CV_DEFAULT, NULL); } acb->acb_zb = *zb; if (pio != NULL) { acb->acb_zio_dummy = zio_null(pio, spa, NULL, NULL, NULL, zio_flags); } acb->acb_zio_head = head_zio; acb->acb_next = hdr->b_l1hdr.b_acb; hdr->b_l1hdr.b_acb->acb_prev = acb; hdr->b_l1hdr.b_acb = acb; } mutex_exit(hash_lock); ARCSTAT_BUMP(arcstat_iohits); ARCSTAT_CONDSTAT(!(*arc_flags & ARC_FLAG_PREFETCH), demand, prefetch, is_data, data, metadata, iohits); if (*arc_flags & ARC_FLAG_WAIT) { mutex_enter(&acb->acb_wait_lock); while (acb->acb_wait) { cv_wait(&acb->acb_wait_cv, &acb->acb_wait_lock); } rc = acb->acb_wait_error; mutex_exit(&acb->acb_wait_lock); mutex_destroy(&acb->acb_wait_lock); cv_destroy(&acb->acb_wait_cv); kmem_free(acb, sizeof (arc_callback_t)); } goto out; } ASSERT(hdr->b_l1hdr.b_state == arc_mru || hdr->b_l1hdr.b_state == arc_mfu || hdr->b_l1hdr.b_state == arc_uncached); DTRACE_PROBE1(arc__hit, arc_buf_hdr_t *, hdr); arc_access(hdr, *arc_flags, B_TRUE); if (done && !no_buf) { ASSERT(!embedded_bp || !BP_IS_HOLE(bp)); /* Get a buf with the desired data in it. */ rc = arc_buf_alloc_impl(hdr, spa, zb, private, encrypted_read, compressed_read, noauth_read, B_TRUE, &buf); if (rc == ECKSUM) { /* * Convert authentication and decryption errors * to EIO (and generate an ereport if needed) * before leaving the ARC. */ rc = SET_ERROR(EIO); if ((zio_flags & ZIO_FLAG_SPECULATIVE) == 0) { spa_log_error(spa, zb, hdr->b_birth); (void) zfs_ereport_post( FM_EREPORT_ZFS_AUTHENTICATION, spa, NULL, zb, NULL, 0); } } if (rc != 0) { arc_buf_destroy_impl(buf); buf = NULL; (void) remove_reference(hdr, private); } /* assert any errors weren't due to unloaded keys */ ASSERT((zio_flags & ZIO_FLAG_SPECULATIVE) || rc != EACCES); } mutex_exit(hash_lock); ARCSTAT_BUMP(arcstat_hits); ARCSTAT_CONDSTAT(!(*arc_flags & ARC_FLAG_PREFETCH), demand, prefetch, is_data, data, metadata, hits); *arc_flags |= ARC_FLAG_CACHED; goto done; } else { uint64_t lsize = BP_GET_LSIZE(bp); uint64_t psize = BP_GET_PSIZE(bp); arc_callback_t *acb; vdev_t *vd = NULL; uint64_t addr = 0; boolean_t devw = B_FALSE; uint64_t size; abd_t *hdr_abd; int alloc_flags = encrypted_read ? ARC_HDR_ALLOC_RDATA : 0; arc_buf_contents_t type = BP_GET_BUFC_TYPE(bp); if (*arc_flags & ARC_FLAG_CACHED_ONLY) { if (hash_lock != NULL) mutex_exit(hash_lock); rc = SET_ERROR(ENOENT); goto done; } if (hdr == NULL) { /* * This block is not in the cache or it has * embedded data. */ arc_buf_hdr_t *exists = NULL; hdr = arc_hdr_alloc(guid, psize, lsize, BP_IS_PROTECTED(bp), BP_GET_COMPRESS(bp), 0, type); if (!embedded_bp) { hdr->b_dva = *BP_IDENTITY(bp); hdr->b_birth = BP_GET_BIRTH(bp); exists = buf_hash_insert(hdr, &hash_lock); } if (exists != NULL) { /* somebody beat us to the hash insert */ mutex_exit(hash_lock); buf_discard_identity(hdr); arc_hdr_destroy(hdr); goto top; /* restart the IO request */ } } else { /* * This block is in the ghost cache or encrypted data * was requested and we didn't have it. If it was * L2-only (and thus didn't have an L1 hdr), * we realloc the header to add an L1 hdr. */ if (!HDR_HAS_L1HDR(hdr)) { hdr = arc_hdr_realloc(hdr, hdr_l2only_cache, hdr_full_cache); } if (GHOST_STATE(hdr->b_l1hdr.b_state)) { ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); ASSERT0(zfs_refcount_count( &hdr->b_l1hdr.b_refcnt)); ASSERT3P(hdr->b_l1hdr.b_buf, ==, NULL); #ifdef ZFS_DEBUG ASSERT3P(hdr->b_l1hdr.b_freeze_cksum, ==, NULL); #endif } else if (HDR_IO_IN_PROGRESS(hdr)) { /* * If this header already had an IO in progress * and we are performing another IO to fetch * encrypted data we must wait until the first * IO completes so as not to confuse * arc_read_done(). This should be very rare * and so the performance impact shouldn't * matter. */ arc_callback_t *acb = kmem_zalloc( sizeof (arc_callback_t), KM_SLEEP); acb->acb_wait = B_TRUE; mutex_init(&acb->acb_wait_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&acb->acb_wait_cv, NULL, CV_DEFAULT, NULL); acb->acb_zio_head = hdr->b_l1hdr.b_acb->acb_zio_head; acb->acb_next = hdr->b_l1hdr.b_acb; hdr->b_l1hdr.b_acb->acb_prev = acb; hdr->b_l1hdr.b_acb = acb; mutex_exit(hash_lock); mutex_enter(&acb->acb_wait_lock); while (acb->acb_wait) { cv_wait(&acb->acb_wait_cv, &acb->acb_wait_lock); } mutex_exit(&acb->acb_wait_lock); mutex_destroy(&acb->acb_wait_lock); cv_destroy(&acb->acb_wait_cv); kmem_free(acb, sizeof (arc_callback_t)); goto top; } } if (*arc_flags & ARC_FLAG_UNCACHED) { arc_hdr_set_flags(hdr, ARC_FLAG_UNCACHED); if (!encrypted_read) alloc_flags |= ARC_HDR_ALLOC_LINEAR; } /* * Take additional reference for IO_IN_PROGRESS. It stops * arc_access() from putting this header without any buffers * and so other references but obviously nonevictable onto * the evictable list of MRU or MFU state. */ add_reference(hdr, hdr); if (!embedded_bp) arc_access(hdr, *arc_flags, B_FALSE); arc_hdr_set_flags(hdr, ARC_FLAG_IO_IN_PROGRESS); arc_hdr_alloc_abd(hdr, alloc_flags); if (encrypted_read) { ASSERT(HDR_HAS_RABD(hdr)); size = HDR_GET_PSIZE(hdr); hdr_abd = hdr->b_crypt_hdr.b_rabd; zio_flags |= ZIO_FLAG_RAW; } else { ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); size = arc_hdr_size(hdr); hdr_abd = hdr->b_l1hdr.b_pabd; if (arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF) { zio_flags |= ZIO_FLAG_RAW_COMPRESS; } /* * For authenticated bp's, we do not ask the ZIO layer * to authenticate them since this will cause the entire * IO to fail if the key isn't loaded. Instead, we * defer authentication until arc_buf_fill(), which will * verify the data when the key is available. */ if (BP_IS_AUTHENTICATED(bp)) zio_flags |= ZIO_FLAG_RAW_ENCRYPT; } if (BP_IS_AUTHENTICATED(bp)) arc_hdr_set_flags(hdr, ARC_FLAG_NOAUTH); if (BP_GET_LEVEL(bp) > 0) arc_hdr_set_flags(hdr, ARC_FLAG_INDIRECT); ASSERT(!GHOST_STATE(hdr->b_l1hdr.b_state)); acb = kmem_zalloc(sizeof (arc_callback_t), KM_SLEEP); acb->acb_done = done; acb->acb_private = private; acb->acb_compressed = compressed_read; acb->acb_encrypted = encrypted_read; acb->acb_noauth = noauth_read; acb->acb_zb = *zb; ASSERT3P(hdr->b_l1hdr.b_acb, ==, NULL); hdr->b_l1hdr.b_acb = acb; if (HDR_HAS_L2HDR(hdr) && (vd = hdr->b_l2hdr.b_dev->l2ad_vdev) != NULL) { devw = hdr->b_l2hdr.b_dev->l2ad_writing; addr = hdr->b_l2hdr.b_daddr; /* * Lock out L2ARC device removal. */ if (vdev_is_dead(vd) || !spa_config_tryenter(spa, SCL_L2ARC, vd, RW_READER)) vd = NULL; } /* * We count both async reads and scrub IOs as asynchronous so * that both can be upgraded in the event of a cache hit while * the read IO is still in-flight. */ if (priority == ZIO_PRIORITY_ASYNC_READ || priority == ZIO_PRIORITY_SCRUB) arc_hdr_set_flags(hdr, ARC_FLAG_PRIO_ASYNC_READ); else arc_hdr_clear_flags(hdr, ARC_FLAG_PRIO_ASYNC_READ); /* * At this point, we have a level 1 cache miss or a blkptr * with embedded data. Try again in L2ARC if possible. */ ASSERT3U(HDR_GET_LSIZE(hdr), ==, lsize); /* * Skip ARC stat bump for block pointers with embedded * data. The data are read from the blkptr itself via * decode_embedded_bp_compressed(). */ if (!embedded_bp) { DTRACE_PROBE4(arc__miss, arc_buf_hdr_t *, hdr, blkptr_t *, bp, uint64_t, lsize, zbookmark_phys_t *, zb); ARCSTAT_BUMP(arcstat_misses); ARCSTAT_CONDSTAT(!(*arc_flags & ARC_FLAG_PREFETCH), demand, prefetch, !HDR_ISTYPE_METADATA(hdr), data, metadata, misses); zfs_racct_read(size, 1); } /* Check if the spa even has l2 configured */ const boolean_t spa_has_l2 = l2arc_ndev != 0 && spa->spa_l2cache.sav_count > 0; if (vd != NULL && spa_has_l2 && !(l2arc_norw && devw)) { /* * Read from the L2ARC if the following are true: * 1. The L2ARC vdev was previously cached. * 2. This buffer still has L2ARC metadata. * 3. This buffer isn't currently writing to the L2ARC. * 4. The L2ARC entry wasn't evicted, which may * also have invalidated the vdev. */ if (HDR_HAS_L2HDR(hdr) && !HDR_L2_WRITING(hdr) && !HDR_L2_EVICTED(hdr)) { l2arc_read_callback_t *cb; abd_t *abd; uint64_t asize; DTRACE_PROBE1(l2arc__hit, arc_buf_hdr_t *, hdr); ARCSTAT_BUMP(arcstat_l2_hits); hdr->b_l2hdr.b_hits++; cb = kmem_zalloc(sizeof (l2arc_read_callback_t), KM_SLEEP); cb->l2rcb_hdr = hdr; cb->l2rcb_bp = *bp; cb->l2rcb_zb = *zb; cb->l2rcb_flags = zio_flags; /* * When Compressed ARC is disabled, but the * L2ARC block is compressed, arc_hdr_size() * will have returned LSIZE rather than PSIZE. */ if (HDR_GET_COMPRESS(hdr) != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr) && HDR_GET_PSIZE(hdr) != 0) { size = HDR_GET_PSIZE(hdr); } asize = vdev_psize_to_asize(vd, size); if (asize != size) { abd = abd_alloc_for_io(asize, HDR_ISTYPE_METADATA(hdr)); cb->l2rcb_abd = abd; } else { abd = hdr_abd; } ASSERT(addr >= VDEV_LABEL_START_SIZE && addr + asize <= vd->vdev_psize - VDEV_LABEL_END_SIZE); /* * l2arc read. The SCL_L2ARC lock will be * released by l2arc_read_done(). * Issue a null zio if the underlying buffer * was squashed to zero size by compression. */ ASSERT3U(arc_hdr_get_compress(hdr), !=, ZIO_COMPRESS_EMPTY); rzio = zio_read_phys(pio, vd, addr, asize, abd, ZIO_CHECKSUM_OFF, l2arc_read_done, cb, priority, zio_flags | ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY, B_FALSE); acb->acb_zio_head = rzio; if (hash_lock != NULL) mutex_exit(hash_lock); DTRACE_PROBE2(l2arc__read, vdev_t *, vd, zio_t *, rzio); ARCSTAT_INCR(arcstat_l2_read_bytes, HDR_GET_PSIZE(hdr)); if (*arc_flags & ARC_FLAG_NOWAIT) { zio_nowait(rzio); goto out; } ASSERT(*arc_flags & ARC_FLAG_WAIT); if (zio_wait(rzio) == 0) goto out; /* l2arc read error; goto zio_read() */ if (hash_lock != NULL) mutex_enter(hash_lock); } else { DTRACE_PROBE1(l2arc__miss, arc_buf_hdr_t *, hdr); ARCSTAT_BUMP(arcstat_l2_misses); if (HDR_L2_WRITING(hdr)) ARCSTAT_BUMP(arcstat_l2_rw_clash); spa_config_exit(spa, SCL_L2ARC, vd); } } else { if (vd != NULL) spa_config_exit(spa, SCL_L2ARC, vd); /* * Only a spa with l2 should contribute to l2 * miss stats. (Including the case of having a * faulted cache device - that's also a miss.) */ if (spa_has_l2) { /* * Skip ARC stat bump for block pointers with * embedded data. The data are read from the * blkptr itself via * decode_embedded_bp_compressed(). */ if (!embedded_bp) { DTRACE_PROBE1(l2arc__miss, arc_buf_hdr_t *, hdr); ARCSTAT_BUMP(arcstat_l2_misses); } } } rzio = zio_read(pio, spa, bp, hdr_abd, size, arc_read_done, hdr, priority, zio_flags, zb); acb->acb_zio_head = rzio; if (hash_lock != NULL) mutex_exit(hash_lock); if (*arc_flags & ARC_FLAG_WAIT) { rc = zio_wait(rzio); goto out; } ASSERT(*arc_flags & ARC_FLAG_NOWAIT); zio_nowait(rzio); } out: /* embedded bps don't actually go to disk */ if (!embedded_bp) spa_read_history_add(spa, zb, *arc_flags); spl_fstrans_unmark(cookie); return (rc); done: if (done) done(NULL, zb, bp, buf, private); if (pio && rc != 0) { zio_t *zio = zio_null(pio, spa, NULL, NULL, NULL, zio_flags); zio->io_error = rc; zio_nowait(zio); } goto out; } arc_prune_t * arc_add_prune_callback(arc_prune_func_t *func, void *private) { arc_prune_t *p; p = kmem_alloc(sizeof (*p), KM_SLEEP); p->p_pfunc = func; p->p_private = private; list_link_init(&p->p_node); zfs_refcount_create(&p->p_refcnt); mutex_enter(&arc_prune_mtx); zfs_refcount_add(&p->p_refcnt, &arc_prune_list); list_insert_head(&arc_prune_list, p); mutex_exit(&arc_prune_mtx); return (p); } void arc_remove_prune_callback(arc_prune_t *p) { boolean_t wait = B_FALSE; mutex_enter(&arc_prune_mtx); list_remove(&arc_prune_list, p); if (zfs_refcount_remove(&p->p_refcnt, &arc_prune_list) > 0) wait = B_TRUE; mutex_exit(&arc_prune_mtx); /* wait for arc_prune_task to finish */ if (wait) taskq_wait_outstanding(arc_prune_taskq, 0); ASSERT0(zfs_refcount_count(&p->p_refcnt)); zfs_refcount_destroy(&p->p_refcnt); kmem_free(p, sizeof (*p)); } /* * Helper function for arc_prune_async() it is responsible for safely * handling the execution of a registered arc_prune_func_t. */ static void arc_prune_task(void *ptr) { arc_prune_t *ap = (arc_prune_t *)ptr; arc_prune_func_t *func = ap->p_pfunc; if (func != NULL) func(ap->p_adjust, ap->p_private); (void) zfs_refcount_remove(&ap->p_refcnt, func); } /* * Notify registered consumers they must drop holds on a portion of the ARC * buffers they reference. This provides a mechanism to ensure the ARC can * honor the metadata limit and reclaim otherwise pinned ARC buffers. * * This operation is performed asynchronously so it may be safely called * in the context of the arc_reclaim_thread(). A reference is taken here * for each registered arc_prune_t and the arc_prune_task() is responsible * for releasing it once the registered arc_prune_func_t has completed. */ static void arc_prune_async(uint64_t adjust) { arc_prune_t *ap; mutex_enter(&arc_prune_mtx); for (ap = list_head(&arc_prune_list); ap != NULL; ap = list_next(&arc_prune_list, ap)) { if (zfs_refcount_count(&ap->p_refcnt) >= 2) continue; zfs_refcount_add(&ap->p_refcnt, ap->p_pfunc); ap->p_adjust = adjust; if (taskq_dispatch(arc_prune_taskq, arc_prune_task, ap, TQ_SLEEP) == TASKQID_INVALID) { (void) zfs_refcount_remove(&ap->p_refcnt, ap->p_pfunc); continue; } ARCSTAT_BUMP(arcstat_prune); } mutex_exit(&arc_prune_mtx); } /* * Notify the arc that a block was freed, and thus will never be used again. */ void arc_freed(spa_t *spa, const blkptr_t *bp) { arc_buf_hdr_t *hdr; kmutex_t *hash_lock; uint64_t guid = spa_load_guid(spa); ASSERT(!BP_IS_EMBEDDED(bp)); hdr = buf_hash_find(guid, bp, &hash_lock); if (hdr == NULL) return; /* * We might be trying to free a block that is still doing I/O * (i.e. prefetch) or has some other reference (i.e. a dedup-ed, * dmu_sync-ed block). A block may also have a reference if it is * part of a dedup-ed, dmu_synced write. The dmu_sync() function would * have written the new block to its final resting place on disk but * without the dedup flag set. This would have left the hdr in the MRU * state and discoverable. When the txg finally syncs it detects that * the block was overridden in open context and issues an override I/O. * Since this is a dedup block, the override I/O will determine if the * block is already in the DDT. If so, then it will replace the io_bp * with the bp from the DDT and allow the I/O to finish. When the I/O * reaches the done callback, dbuf_write_override_done, it will * check to see if the io_bp and io_bp_override are identical. * If they are not, then it indicates that the bp was replaced with * the bp in the DDT and the override bp is freed. This allows * us to arrive here with a reference on a block that is being * freed. So if we have an I/O in progress, or a reference to * this hdr, then we don't destroy the hdr. */ if (!HDR_HAS_L1HDR(hdr) || zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)) { arc_change_state(arc_anon, hdr); arc_hdr_destroy(hdr); mutex_exit(hash_lock); } else { mutex_exit(hash_lock); } } /* * Release this buffer from the cache, making it an anonymous buffer. This * must be done after a read and prior to modifying the buffer contents. * If the buffer has more than one reference, we must make * a new hdr for the buffer. */ void arc_release(arc_buf_t *buf, const void *tag) { arc_buf_hdr_t *hdr = buf->b_hdr; /* * It would be nice to assert that if its DMU metadata (level > * 0 || it's the dnode file), then it must be syncing context. * But we don't know that information at this level. */ ASSERT(HDR_HAS_L1HDR(hdr)); /* * We don't grab the hash lock prior to this check, because if * the buffer's header is in the arc_anon state, it won't be * linked into the hash table. */ if (hdr->b_l1hdr.b_state == arc_anon) { ASSERT(!HDR_IO_IN_PROGRESS(hdr)); ASSERT(!HDR_IN_HASH_TABLE(hdr)); ASSERT(!HDR_HAS_L2HDR(hdr)); ASSERT3P(hdr->b_l1hdr.b_buf, ==, buf); ASSERT(ARC_BUF_LAST(buf)); ASSERT3S(zfs_refcount_count(&hdr->b_l1hdr.b_refcnt), ==, 1); ASSERT(!multilist_link_active(&hdr->b_l1hdr.b_arc_node)); hdr->b_l1hdr.b_arc_access = 0; /* * If the buf is being overridden then it may already * have a hdr that is not empty. */ buf_discard_identity(hdr); arc_buf_thaw(buf); return; } kmutex_t *hash_lock = HDR_LOCK(hdr); mutex_enter(hash_lock); /* * This assignment is only valid as long as the hash_lock is * held, we must be careful not to reference state or the * b_state field after dropping the lock. */ arc_state_t *state = hdr->b_l1hdr.b_state; ASSERT3P(hash_lock, ==, HDR_LOCK(hdr)); ASSERT3P(state, !=, arc_anon); /* this buffer is not on any list */ ASSERT3S(zfs_refcount_count(&hdr->b_l1hdr.b_refcnt), >, 0); if (HDR_HAS_L2HDR(hdr)) { mutex_enter(&hdr->b_l2hdr.b_dev->l2ad_mtx); /* * We have to recheck this conditional again now that * we're holding the l2ad_mtx to prevent a race with * another thread which might be concurrently calling * l2arc_evict(). In that case, l2arc_evict() might have * destroyed the header's L2 portion as we were waiting * to acquire the l2ad_mtx. */ if (HDR_HAS_L2HDR(hdr)) arc_hdr_l2hdr_destroy(hdr); mutex_exit(&hdr->b_l2hdr.b_dev->l2ad_mtx); } /* * Do we have more than one buf? */ if (hdr->b_l1hdr.b_buf != buf || !ARC_BUF_LAST(buf)) { arc_buf_hdr_t *nhdr; uint64_t spa = hdr->b_spa; uint64_t psize = HDR_GET_PSIZE(hdr); uint64_t lsize = HDR_GET_LSIZE(hdr); boolean_t protected = HDR_PROTECTED(hdr); enum zio_compress compress = arc_hdr_get_compress(hdr); arc_buf_contents_t type = arc_buf_type(hdr); VERIFY3U(hdr->b_type, ==, type); ASSERT(hdr->b_l1hdr.b_buf != buf || buf->b_next != NULL); VERIFY3S(remove_reference(hdr, tag), >, 0); if (ARC_BUF_SHARED(buf) && !ARC_BUF_COMPRESSED(buf)) { ASSERT3P(hdr->b_l1hdr.b_buf, !=, buf); ASSERT(ARC_BUF_LAST(buf)); } /* * Pull the data off of this hdr and attach it to * a new anonymous hdr. Also find the last buffer * in the hdr's buffer list. */ arc_buf_t *lastbuf = arc_buf_remove(hdr, buf); ASSERT3P(lastbuf, !=, NULL); /* * If the current arc_buf_t and the hdr are sharing their data * buffer, then we must stop sharing that block. */ if (ARC_BUF_SHARED(buf)) { ASSERT3P(hdr->b_l1hdr.b_buf, !=, buf); ASSERT(!arc_buf_is_shared(lastbuf)); /* * First, sever the block sharing relationship between * buf and the arc_buf_hdr_t. */ arc_unshare_buf(hdr, buf); /* * Now we need to recreate the hdr's b_pabd. Since we * have lastbuf handy, we try to share with it, but if * we can't then we allocate a new b_pabd and copy the * data from buf into it. */ if (arc_can_share(hdr, lastbuf)) { arc_share_buf(hdr, lastbuf); } else { arc_hdr_alloc_abd(hdr, 0); abd_copy_from_buf(hdr->b_l1hdr.b_pabd, buf->b_data, psize); } VERIFY3P(lastbuf->b_data, !=, NULL); } else if (HDR_SHARED_DATA(hdr)) { /* * Uncompressed shared buffers are always at the end * of the list. Compressed buffers don't have the * same requirements. This makes it hard to * simply assert that the lastbuf is shared so * we rely on the hdr's compression flags to determine * if we have a compressed, shared buffer. */ ASSERT(arc_buf_is_shared(lastbuf) || arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF); ASSERT(!arc_buf_is_shared(buf)); } ASSERT(hdr->b_l1hdr.b_pabd != NULL || HDR_HAS_RABD(hdr)); ASSERT3P(state, !=, arc_l2c_only); (void) zfs_refcount_remove_many(&state->arcs_size[type], arc_buf_size(buf), buf); if (zfs_refcount_is_zero(&hdr->b_l1hdr.b_refcnt)) { ASSERT3P(state, !=, arc_l2c_only); (void) zfs_refcount_remove_many( &state->arcs_esize[type], arc_buf_size(buf), buf); } arc_cksum_verify(buf); arc_buf_unwatch(buf); /* if this is the last uncompressed buf free the checksum */ if (!arc_hdr_has_uncompressed_buf(hdr)) arc_cksum_free(hdr); mutex_exit(hash_lock); nhdr = arc_hdr_alloc(spa, psize, lsize, protected, compress, hdr->b_complevel, type); ASSERT3P(nhdr->b_l1hdr.b_buf, ==, NULL); ASSERT0(zfs_refcount_count(&nhdr->b_l1hdr.b_refcnt)); VERIFY3U(nhdr->b_type, ==, type); ASSERT(!HDR_SHARED_DATA(nhdr)); nhdr->b_l1hdr.b_buf = buf; (void) zfs_refcount_add(&nhdr->b_l1hdr.b_refcnt, tag); buf->b_hdr = nhdr; (void) zfs_refcount_add_many(&arc_anon->arcs_size[type], arc_buf_size(buf), buf); } else { ASSERT(zfs_refcount_count(&hdr->b_l1hdr.b_refcnt) == 1); /* protected by hash lock, or hdr is on arc_anon */ ASSERT(!multilist_link_active(&hdr->b_l1hdr.b_arc_node)); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); hdr->b_l1hdr.b_mru_hits = 0; hdr->b_l1hdr.b_mru_ghost_hits = 0; hdr->b_l1hdr.b_mfu_hits = 0; hdr->b_l1hdr.b_mfu_ghost_hits = 0; arc_change_state(arc_anon, hdr); hdr->b_l1hdr.b_arc_access = 0; mutex_exit(hash_lock); buf_discard_identity(hdr); arc_buf_thaw(buf); } } int arc_released(arc_buf_t *buf) { return (buf->b_data != NULL && buf->b_hdr->b_l1hdr.b_state == arc_anon); } #ifdef ZFS_DEBUG int arc_referenced(arc_buf_t *buf) { return (zfs_refcount_count(&buf->b_hdr->b_l1hdr.b_refcnt)); } #endif static void arc_write_ready(zio_t *zio) { arc_write_callback_t *callback = zio->io_private; arc_buf_t *buf = callback->awcb_buf; arc_buf_hdr_t *hdr = buf->b_hdr; blkptr_t *bp = zio->io_bp; uint64_t psize = BP_IS_HOLE(bp) ? 0 : BP_GET_PSIZE(bp); fstrans_cookie_t cookie = spl_fstrans_mark(); ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT(!zfs_refcount_is_zero(&buf->b_hdr->b_l1hdr.b_refcnt)); ASSERT3P(hdr->b_l1hdr.b_buf, !=, NULL); /* * If we're reexecuting this zio because the pool suspended, then * cleanup any state that was previously set the first time the * callback was invoked. */ if (zio->io_flags & ZIO_FLAG_REEXECUTED) { arc_cksum_free(hdr); arc_buf_unwatch(buf); if (hdr->b_l1hdr.b_pabd != NULL) { if (ARC_BUF_SHARED(buf)) { arc_unshare_buf(hdr, buf); } else { ASSERT(!arc_buf_is_shared(buf)); arc_hdr_free_abd(hdr, B_FALSE); } } if (HDR_HAS_RABD(hdr)) arc_hdr_free_abd(hdr, B_TRUE); } ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); ASSERT(!HDR_HAS_RABD(hdr)); ASSERT(!HDR_SHARED_DATA(hdr)); ASSERT(!arc_buf_is_shared(buf)); callback->awcb_ready(zio, buf, callback->awcb_private); if (HDR_IO_IN_PROGRESS(hdr)) { ASSERT(zio->io_flags & ZIO_FLAG_REEXECUTED); } else { arc_hdr_set_flags(hdr, ARC_FLAG_IO_IN_PROGRESS); add_reference(hdr, hdr); /* For IO_IN_PROGRESS. */ } if (BP_IS_PROTECTED(bp)) { /* ZIL blocks are written through zio_rewrite */ ASSERT3U(BP_GET_TYPE(bp), !=, DMU_OT_INTENT_LOG); if (BP_SHOULD_BYTESWAP(bp)) { if (BP_GET_LEVEL(bp) > 0) { hdr->b_l1hdr.b_byteswap = DMU_BSWAP_UINT64; } else { hdr->b_l1hdr.b_byteswap = DMU_OT_BYTESWAP(BP_GET_TYPE(bp)); } } else { hdr->b_l1hdr.b_byteswap = DMU_BSWAP_NUMFUNCS; } arc_hdr_set_flags(hdr, ARC_FLAG_PROTECTED); hdr->b_crypt_hdr.b_ot = BP_GET_TYPE(bp); hdr->b_crypt_hdr.b_dsobj = zio->io_bookmark.zb_objset; zio_crypt_decode_params_bp(bp, hdr->b_crypt_hdr.b_salt, hdr->b_crypt_hdr.b_iv); zio_crypt_decode_mac_bp(bp, hdr->b_crypt_hdr.b_mac); } else { arc_hdr_clear_flags(hdr, ARC_FLAG_PROTECTED); } /* * If this block was written for raw encryption but the zio layer * ended up only authenticating it, adjust the buffer flags now. */ if (BP_IS_AUTHENTICATED(bp) && ARC_BUF_ENCRYPTED(buf)) { arc_hdr_set_flags(hdr, ARC_FLAG_NOAUTH); buf->b_flags &= ~ARC_BUF_FLAG_ENCRYPTED; if (BP_GET_COMPRESS(bp) == ZIO_COMPRESS_OFF) buf->b_flags &= ~ARC_BUF_FLAG_COMPRESSED; } else if (BP_IS_HOLE(bp) && ARC_BUF_ENCRYPTED(buf)) { buf->b_flags &= ~ARC_BUF_FLAG_ENCRYPTED; buf->b_flags &= ~ARC_BUF_FLAG_COMPRESSED; } /* this must be done after the buffer flags are adjusted */ arc_cksum_compute(buf); enum zio_compress compress; if (BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp)) { compress = ZIO_COMPRESS_OFF; } else { ASSERT3U(HDR_GET_LSIZE(hdr), ==, BP_GET_LSIZE(bp)); compress = BP_GET_COMPRESS(bp); } HDR_SET_PSIZE(hdr, psize); arc_hdr_set_compress(hdr, compress); hdr->b_complevel = zio->io_prop.zp_complevel; if (zio->io_error != 0 || psize == 0) goto out; /* * Fill the hdr with data. If the buffer is encrypted we have no choice * but to copy the data into b_radb. If the hdr is compressed, the data * we want is available from the zio, otherwise we can take it from * the buf. * * We might be able to share the buf's data with the hdr here. However, * doing so would cause the ARC to be full of linear ABDs if we write a * lot of shareable data. As a compromise, we check whether scattered * ABDs are allowed, and assume that if they are then the user wants * the ARC to be primarily filled with them regardless of the data being * written. Therefore, if they're allowed then we allocate one and copy * the data into it; otherwise, we share the data directly if we can. */ if (ARC_BUF_ENCRYPTED(buf)) { ASSERT3U(psize, >, 0); ASSERT(ARC_BUF_COMPRESSED(buf)); arc_hdr_alloc_abd(hdr, ARC_HDR_ALLOC_RDATA | ARC_HDR_USE_RESERVE); abd_copy(hdr->b_crypt_hdr.b_rabd, zio->io_abd, psize); } else if (!(HDR_UNCACHED(hdr) || abd_size_alloc_linear(arc_buf_size(buf))) || !arc_can_share(hdr, buf)) { /* * Ideally, we would always copy the io_abd into b_pabd, but the * user may have disabled compressed ARC, thus we must check the * hdr's compression setting rather than the io_bp's. */ if (BP_IS_ENCRYPTED(bp)) { ASSERT3U(psize, >, 0); arc_hdr_alloc_abd(hdr, ARC_HDR_ALLOC_RDATA | ARC_HDR_USE_RESERVE); abd_copy(hdr->b_crypt_hdr.b_rabd, zio->io_abd, psize); } else if (arc_hdr_get_compress(hdr) != ZIO_COMPRESS_OFF && !ARC_BUF_COMPRESSED(buf)) { ASSERT3U(psize, >, 0); arc_hdr_alloc_abd(hdr, ARC_HDR_USE_RESERVE); abd_copy(hdr->b_l1hdr.b_pabd, zio->io_abd, psize); } else { ASSERT3U(zio->io_orig_size, ==, arc_hdr_size(hdr)); arc_hdr_alloc_abd(hdr, ARC_HDR_USE_RESERVE); abd_copy_from_buf(hdr->b_l1hdr.b_pabd, buf->b_data, arc_buf_size(buf)); } } else { ASSERT3P(buf->b_data, ==, abd_to_buf(zio->io_orig_abd)); ASSERT3U(zio->io_orig_size, ==, arc_buf_size(buf)); ASSERT3P(hdr->b_l1hdr.b_buf, ==, buf); ASSERT(ARC_BUF_LAST(buf)); arc_share_buf(hdr, buf); } out: arc_hdr_verify(hdr, bp); spl_fstrans_unmark(cookie); } static void arc_write_children_ready(zio_t *zio) { arc_write_callback_t *callback = zio->io_private; arc_buf_t *buf = callback->awcb_buf; callback->awcb_children_ready(zio, buf, callback->awcb_private); } static void arc_write_done(zio_t *zio) { arc_write_callback_t *callback = zio->io_private; arc_buf_t *buf = callback->awcb_buf; arc_buf_hdr_t *hdr = buf->b_hdr; ASSERT3P(hdr->b_l1hdr.b_acb, ==, NULL); if (zio->io_error == 0) { arc_hdr_verify(hdr, zio->io_bp); if (BP_IS_HOLE(zio->io_bp) || BP_IS_EMBEDDED(zio->io_bp)) { buf_discard_identity(hdr); } else { hdr->b_dva = *BP_IDENTITY(zio->io_bp); hdr->b_birth = BP_GET_BIRTH(zio->io_bp); } } else { ASSERT(HDR_EMPTY(hdr)); } /* * If the block to be written was all-zero or compressed enough to be * embedded in the BP, no write was performed so there will be no * dva/birth/checksum. The buffer must therefore remain anonymous * (and uncached). */ if (!HDR_EMPTY(hdr)) { arc_buf_hdr_t *exists; kmutex_t *hash_lock; ASSERT3U(zio->io_error, ==, 0); arc_cksum_verify(buf); exists = buf_hash_insert(hdr, &hash_lock); if (exists != NULL) { /* * This can only happen if we overwrite for * sync-to-convergence, because we remove * buffers from the hash table when we arc_free(). */ if (zio->io_flags & ZIO_FLAG_IO_REWRITE) { if (!BP_EQUAL(&zio->io_bp_orig, zio->io_bp)) panic("bad overwrite, hdr=%p exists=%p", (void *)hdr, (void *)exists); ASSERT(zfs_refcount_is_zero( &exists->b_l1hdr.b_refcnt)); arc_change_state(arc_anon, exists); arc_hdr_destroy(exists); mutex_exit(hash_lock); exists = buf_hash_insert(hdr, &hash_lock); ASSERT3P(exists, ==, NULL); } else if (zio->io_flags & ZIO_FLAG_NOPWRITE) { /* nopwrite */ ASSERT(zio->io_prop.zp_nopwrite); if (!BP_EQUAL(&zio->io_bp_orig, zio->io_bp)) panic("bad nopwrite, hdr=%p exists=%p", (void *)hdr, (void *)exists); } else { /* Dedup */ ASSERT3P(hdr->b_l1hdr.b_buf, !=, NULL); ASSERT(ARC_BUF_LAST(hdr->b_l1hdr.b_buf)); ASSERT(hdr->b_l1hdr.b_state == arc_anon); ASSERT(BP_GET_DEDUP(zio->io_bp)); ASSERT(BP_GET_LEVEL(zio->io_bp) == 0); } } arc_hdr_clear_flags(hdr, ARC_FLAG_IO_IN_PROGRESS); VERIFY3S(remove_reference(hdr, hdr), >, 0); /* if it's not anon, we are doing a scrub */ if (exists == NULL && hdr->b_l1hdr.b_state == arc_anon) arc_access(hdr, 0, B_FALSE); mutex_exit(hash_lock); } else { arc_hdr_clear_flags(hdr, ARC_FLAG_IO_IN_PROGRESS); VERIFY3S(remove_reference(hdr, hdr), >, 0); } callback->awcb_done(zio, buf, callback->awcb_private); abd_free(zio->io_abd); kmem_free(callback, sizeof (arc_write_callback_t)); } zio_t * arc_write(zio_t *pio, spa_t *spa, uint64_t txg, blkptr_t *bp, arc_buf_t *buf, boolean_t uncached, boolean_t l2arc, const zio_prop_t *zp, arc_write_done_func_t *ready, arc_write_done_func_t *children_ready, arc_write_done_func_t *done, void *private, zio_priority_t priority, int zio_flags, const zbookmark_phys_t *zb) { arc_buf_hdr_t *hdr = buf->b_hdr; arc_write_callback_t *callback; zio_t *zio; zio_prop_t localprop = *zp; ASSERT3P(ready, !=, NULL); ASSERT3P(done, !=, NULL); ASSERT(!HDR_IO_ERROR(hdr)); ASSERT(!HDR_IO_IN_PROGRESS(hdr)); ASSERT3P(hdr->b_l1hdr.b_acb, ==, NULL); ASSERT3P(hdr->b_l1hdr.b_buf, !=, NULL); if (uncached) arc_hdr_set_flags(hdr, ARC_FLAG_UNCACHED); else if (l2arc) arc_hdr_set_flags(hdr, ARC_FLAG_L2CACHE); if (ARC_BUF_ENCRYPTED(buf)) { ASSERT(ARC_BUF_COMPRESSED(buf)); localprop.zp_encrypt = B_TRUE; localprop.zp_compress = HDR_GET_COMPRESS(hdr); localprop.zp_complevel = hdr->b_complevel; localprop.zp_byteorder = (hdr->b_l1hdr.b_byteswap == DMU_BSWAP_NUMFUNCS) ? ZFS_HOST_BYTEORDER : !ZFS_HOST_BYTEORDER; memcpy(localprop.zp_salt, hdr->b_crypt_hdr.b_salt, ZIO_DATA_SALT_LEN); memcpy(localprop.zp_iv, hdr->b_crypt_hdr.b_iv, ZIO_DATA_IV_LEN); memcpy(localprop.zp_mac, hdr->b_crypt_hdr.b_mac, ZIO_DATA_MAC_LEN); if (DMU_OT_IS_ENCRYPTED(localprop.zp_type)) { localprop.zp_nopwrite = B_FALSE; localprop.zp_copies = MIN(localprop.zp_copies, SPA_DVAS_PER_BP - 1); } zio_flags |= ZIO_FLAG_RAW; } else if (ARC_BUF_COMPRESSED(buf)) { ASSERT3U(HDR_GET_LSIZE(hdr), !=, arc_buf_size(buf)); localprop.zp_compress = HDR_GET_COMPRESS(hdr); localprop.zp_complevel = hdr->b_complevel; zio_flags |= ZIO_FLAG_RAW_COMPRESS; } callback = kmem_zalloc(sizeof (arc_write_callback_t), KM_SLEEP); callback->awcb_ready = ready; callback->awcb_children_ready = children_ready; callback->awcb_done = done; callback->awcb_private = private; callback->awcb_buf = buf; /* * The hdr's b_pabd is now stale, free it now. A new data block * will be allocated when the zio pipeline calls arc_write_ready(). */ if (hdr->b_l1hdr.b_pabd != NULL) { /* * If the buf is currently sharing the data block with * the hdr then we need to break that relationship here. * The hdr will remain with a NULL data pointer and the * buf will take sole ownership of the block. */ if (ARC_BUF_SHARED(buf)) { arc_unshare_buf(hdr, buf); } else { ASSERT(!arc_buf_is_shared(buf)); arc_hdr_free_abd(hdr, B_FALSE); } VERIFY3P(buf->b_data, !=, NULL); } if (HDR_HAS_RABD(hdr)) arc_hdr_free_abd(hdr, B_TRUE); if (!(zio_flags & ZIO_FLAG_RAW)) arc_hdr_set_compress(hdr, ZIO_COMPRESS_OFF); ASSERT(!arc_buf_is_shared(buf)); ASSERT3P(hdr->b_l1hdr.b_pabd, ==, NULL); zio = zio_write(pio, spa, txg, bp, abd_get_from_buf(buf->b_data, HDR_GET_LSIZE(hdr)), HDR_GET_LSIZE(hdr), arc_buf_size(buf), &localprop, arc_write_ready, (children_ready != NULL) ? arc_write_children_ready : NULL, arc_write_done, callback, priority, zio_flags, zb); return (zio); } void arc_tempreserve_clear(uint64_t reserve) { atomic_add_64(&arc_tempreserve, -reserve); ASSERT((int64_t)arc_tempreserve >= 0); } int arc_tempreserve_space(spa_t *spa, uint64_t reserve, uint64_t txg) { int error; uint64_t anon_size; if (!arc_no_grow && reserve > arc_c/4 && reserve * 4 > (2ULL << SPA_MAXBLOCKSHIFT)) arc_c = MIN(arc_c_max, reserve * 4); /* * Throttle when the calculated memory footprint for the TXG * exceeds the target ARC size. */ if (reserve > arc_c) { DMU_TX_STAT_BUMP(dmu_tx_memory_reserve); return (SET_ERROR(ERESTART)); } /* * Don't count loaned bufs as in flight dirty data to prevent long * network delays from blocking transactions that are ready to be * assigned to a txg. */ /* assert that it has not wrapped around */ ASSERT3S(atomic_add_64_nv(&arc_loaned_bytes, 0), >=, 0); anon_size = MAX((int64_t) (zfs_refcount_count(&arc_anon->arcs_size[ARC_BUFC_DATA]) + zfs_refcount_count(&arc_anon->arcs_size[ARC_BUFC_METADATA]) - arc_loaned_bytes), 0); /* * Writes will, almost always, require additional memory allocations * in order to compress/encrypt/etc the data. We therefore need to * make sure that there is sufficient available memory for this. */ error = arc_memory_throttle(spa, reserve, txg); if (error != 0) return (error); /* * Throttle writes when the amount of dirty data in the cache * gets too large. We try to keep the cache less than half full * of dirty blocks so that our sync times don't grow too large. * * In the case of one pool being built on another pool, we want * to make sure we don't end up throttling the lower (backing) * pool when the upper pool is the majority contributor to dirty * data. To insure we make forward progress during throttling, we * also check the current pool's net dirty data and only throttle * if it exceeds zfs_arc_pool_dirty_percent of the anonymous dirty * data in the cache. * * Note: if two requests come in concurrently, we might let them * both succeed, when one of them should fail. Not a huge deal. */ uint64_t total_dirty = reserve + arc_tempreserve + anon_size; uint64_t spa_dirty_anon = spa_dirty_data(spa); uint64_t rarc_c = arc_warm ? arc_c : arc_c_max; if (total_dirty > rarc_c * zfs_arc_dirty_limit_percent / 100 && anon_size > rarc_c * zfs_arc_anon_limit_percent / 100 && spa_dirty_anon > anon_size * zfs_arc_pool_dirty_percent / 100) { #ifdef ZFS_DEBUG uint64_t meta_esize = zfs_refcount_count( &arc_anon->arcs_esize[ARC_BUFC_METADATA]); uint64_t data_esize = zfs_refcount_count(&arc_anon->arcs_esize[ARC_BUFC_DATA]); dprintf("failing, arc_tempreserve=%lluK anon_meta=%lluK " "anon_data=%lluK tempreserve=%lluK rarc_c=%lluK\n", (u_longlong_t)arc_tempreserve >> 10, (u_longlong_t)meta_esize >> 10, (u_longlong_t)data_esize >> 10, (u_longlong_t)reserve >> 10, (u_longlong_t)rarc_c >> 10); #endif DMU_TX_STAT_BUMP(dmu_tx_dirty_throttle); return (SET_ERROR(ERESTART)); } atomic_add_64(&arc_tempreserve, reserve); return (0); } static void arc_kstat_update_state(arc_state_t *state, kstat_named_t *size, kstat_named_t *data, kstat_named_t *metadata, kstat_named_t *evict_data, kstat_named_t *evict_metadata) { data->value.ui64 = zfs_refcount_count(&state->arcs_size[ARC_BUFC_DATA]); metadata->value.ui64 = zfs_refcount_count(&state->arcs_size[ARC_BUFC_METADATA]); size->value.ui64 = data->value.ui64 + metadata->value.ui64; evict_data->value.ui64 = zfs_refcount_count(&state->arcs_esize[ARC_BUFC_DATA]); evict_metadata->value.ui64 = zfs_refcount_count(&state->arcs_esize[ARC_BUFC_METADATA]); } static int arc_kstat_update(kstat_t *ksp, int rw) { arc_stats_t *as = ksp->ks_data; if (rw == KSTAT_WRITE) return (SET_ERROR(EACCES)); as->arcstat_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_hits); as->arcstat_iohits.value.ui64 = wmsum_value(&arc_sums.arcstat_iohits); as->arcstat_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_misses); as->arcstat_demand_data_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_data_hits); as->arcstat_demand_data_iohits.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_data_iohits); as->arcstat_demand_data_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_data_misses); as->arcstat_demand_metadata_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_metadata_hits); as->arcstat_demand_metadata_iohits.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_metadata_iohits); as->arcstat_demand_metadata_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_metadata_misses); as->arcstat_prefetch_data_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_data_hits); as->arcstat_prefetch_data_iohits.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_data_iohits); as->arcstat_prefetch_data_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_data_misses); as->arcstat_prefetch_metadata_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_metadata_hits); as->arcstat_prefetch_metadata_iohits.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_metadata_iohits); as->arcstat_prefetch_metadata_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_prefetch_metadata_misses); as->arcstat_mru_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_mru_hits); as->arcstat_mru_ghost_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_mru_ghost_hits); as->arcstat_mfu_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_mfu_hits); as->arcstat_mfu_ghost_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_mfu_ghost_hits); as->arcstat_uncached_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_uncached_hits); as->arcstat_deleted.value.ui64 = wmsum_value(&arc_sums.arcstat_deleted); as->arcstat_mutex_miss.value.ui64 = wmsum_value(&arc_sums.arcstat_mutex_miss); as->arcstat_access_skip.value.ui64 = wmsum_value(&arc_sums.arcstat_access_skip); as->arcstat_evict_skip.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_skip); as->arcstat_evict_not_enough.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_not_enough); as->arcstat_evict_l2_cached.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_cached); as->arcstat_evict_l2_eligible.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_eligible); as->arcstat_evict_l2_eligible_mfu.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_eligible_mfu); as->arcstat_evict_l2_eligible_mru.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_eligible_mru); as->arcstat_evict_l2_ineligible.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_ineligible); as->arcstat_evict_l2_skip.value.ui64 = wmsum_value(&arc_sums.arcstat_evict_l2_skip); as->arcstat_hash_collisions.value.ui64 = wmsum_value(&arc_sums.arcstat_hash_collisions); as->arcstat_hash_chains.value.ui64 = wmsum_value(&arc_sums.arcstat_hash_chains); as->arcstat_size.value.ui64 = aggsum_value(&arc_sums.arcstat_size); as->arcstat_compressed_size.value.ui64 = wmsum_value(&arc_sums.arcstat_compressed_size); as->arcstat_uncompressed_size.value.ui64 = wmsum_value(&arc_sums.arcstat_uncompressed_size); as->arcstat_overhead_size.value.ui64 = wmsum_value(&arc_sums.arcstat_overhead_size); as->arcstat_hdr_size.value.ui64 = wmsum_value(&arc_sums.arcstat_hdr_size); as->arcstat_data_size.value.ui64 = wmsum_value(&arc_sums.arcstat_data_size); as->arcstat_metadata_size.value.ui64 = wmsum_value(&arc_sums.arcstat_metadata_size); as->arcstat_dbuf_size.value.ui64 = wmsum_value(&arc_sums.arcstat_dbuf_size); #if defined(COMPAT_FREEBSD11) as->arcstat_other_size.value.ui64 = wmsum_value(&arc_sums.arcstat_bonus_size) + wmsum_value(&arc_sums.arcstat_dnode_size) + wmsum_value(&arc_sums.arcstat_dbuf_size); #endif arc_kstat_update_state(arc_anon, &as->arcstat_anon_size, &as->arcstat_anon_data, &as->arcstat_anon_metadata, &as->arcstat_anon_evictable_data, &as->arcstat_anon_evictable_metadata); arc_kstat_update_state(arc_mru, &as->arcstat_mru_size, &as->arcstat_mru_data, &as->arcstat_mru_metadata, &as->arcstat_mru_evictable_data, &as->arcstat_mru_evictable_metadata); arc_kstat_update_state(arc_mru_ghost, &as->arcstat_mru_ghost_size, &as->arcstat_mru_ghost_data, &as->arcstat_mru_ghost_metadata, &as->arcstat_mru_ghost_evictable_data, &as->arcstat_mru_ghost_evictable_metadata); arc_kstat_update_state(arc_mfu, &as->arcstat_mfu_size, &as->arcstat_mfu_data, &as->arcstat_mfu_metadata, &as->arcstat_mfu_evictable_data, &as->arcstat_mfu_evictable_metadata); arc_kstat_update_state(arc_mfu_ghost, &as->arcstat_mfu_ghost_size, &as->arcstat_mfu_ghost_data, &as->arcstat_mfu_ghost_metadata, &as->arcstat_mfu_ghost_evictable_data, &as->arcstat_mfu_ghost_evictable_metadata); arc_kstat_update_state(arc_uncached, &as->arcstat_uncached_size, &as->arcstat_uncached_data, &as->arcstat_uncached_metadata, &as->arcstat_uncached_evictable_data, &as->arcstat_uncached_evictable_metadata); as->arcstat_dnode_size.value.ui64 = wmsum_value(&arc_sums.arcstat_dnode_size); as->arcstat_bonus_size.value.ui64 = wmsum_value(&arc_sums.arcstat_bonus_size); as->arcstat_l2_hits.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_hits); as->arcstat_l2_misses.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_misses); as->arcstat_l2_prefetch_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_prefetch_asize); as->arcstat_l2_mru_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_mru_asize); as->arcstat_l2_mfu_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_mfu_asize); as->arcstat_l2_bufc_data_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_bufc_data_asize); as->arcstat_l2_bufc_metadata_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_bufc_metadata_asize); as->arcstat_l2_feeds.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_feeds); as->arcstat_l2_rw_clash.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rw_clash); as->arcstat_l2_read_bytes.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_read_bytes); as->arcstat_l2_write_bytes.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_write_bytes); as->arcstat_l2_writes_sent.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_writes_sent); as->arcstat_l2_writes_done.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_writes_done); as->arcstat_l2_writes_error.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_writes_error); as->arcstat_l2_writes_lock_retry.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_writes_lock_retry); as->arcstat_l2_evict_lock_retry.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_evict_lock_retry); as->arcstat_l2_evict_reading.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_evict_reading); as->arcstat_l2_evict_l1cached.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_evict_l1cached); as->arcstat_l2_free_on_write.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_free_on_write); as->arcstat_l2_abort_lowmem.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_abort_lowmem); as->arcstat_l2_cksum_bad.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_cksum_bad); as->arcstat_l2_io_error.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_io_error); as->arcstat_l2_lsize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_lsize); as->arcstat_l2_psize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_psize); as->arcstat_l2_hdr_size.value.ui64 = aggsum_value(&arc_sums.arcstat_l2_hdr_size); as->arcstat_l2_log_blk_writes.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_log_blk_writes); as->arcstat_l2_log_blk_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_log_blk_asize); as->arcstat_l2_log_blk_count.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_log_blk_count); as->arcstat_l2_rebuild_success.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_success); as->arcstat_l2_rebuild_abort_unsupported.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_abort_unsupported); as->arcstat_l2_rebuild_abort_io_errors.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_abort_io_errors); as->arcstat_l2_rebuild_abort_dh_errors.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_abort_dh_errors); as->arcstat_l2_rebuild_abort_cksum_lb_errors.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_abort_cksum_lb_errors); as->arcstat_l2_rebuild_abort_lowmem.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_abort_lowmem); as->arcstat_l2_rebuild_size.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_size); as->arcstat_l2_rebuild_asize.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_asize); as->arcstat_l2_rebuild_bufs.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_bufs); as->arcstat_l2_rebuild_bufs_precached.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_bufs_precached); as->arcstat_l2_rebuild_log_blks.value.ui64 = wmsum_value(&arc_sums.arcstat_l2_rebuild_log_blks); as->arcstat_memory_throttle_count.value.ui64 = wmsum_value(&arc_sums.arcstat_memory_throttle_count); as->arcstat_memory_direct_count.value.ui64 = wmsum_value(&arc_sums.arcstat_memory_direct_count); as->arcstat_memory_indirect_count.value.ui64 = wmsum_value(&arc_sums.arcstat_memory_indirect_count); as->arcstat_memory_all_bytes.value.ui64 = arc_all_memory(); as->arcstat_memory_free_bytes.value.ui64 = arc_free_memory(); as->arcstat_memory_available_bytes.value.i64 = arc_available_memory(); as->arcstat_prune.value.ui64 = wmsum_value(&arc_sums.arcstat_prune); as->arcstat_meta_used.value.ui64 = wmsum_value(&arc_sums.arcstat_meta_used); as->arcstat_async_upgrade_sync.value.ui64 = wmsum_value(&arc_sums.arcstat_async_upgrade_sync); as->arcstat_predictive_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_predictive_prefetch); as->arcstat_demand_hit_predictive_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_hit_predictive_prefetch); as->arcstat_demand_iohit_predictive_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_iohit_predictive_prefetch); as->arcstat_prescient_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_prescient_prefetch); as->arcstat_demand_hit_prescient_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_hit_prescient_prefetch); as->arcstat_demand_iohit_prescient_prefetch.value.ui64 = wmsum_value(&arc_sums.arcstat_demand_iohit_prescient_prefetch); as->arcstat_raw_size.value.ui64 = wmsum_value(&arc_sums.arcstat_raw_size); as->arcstat_cached_only_in_progress.value.ui64 = wmsum_value(&arc_sums.arcstat_cached_only_in_progress); as->arcstat_abd_chunk_waste_size.value.ui64 = wmsum_value(&arc_sums.arcstat_abd_chunk_waste_size); return (0); } /* * This function *must* return indices evenly distributed between all * sublists of the multilist. This is needed due to how the ARC eviction * code is laid out; arc_evict_state() assumes ARC buffers are evenly * distributed between all sublists and uses this assumption when * deciding which sublist to evict from and how much to evict from it. */ static unsigned int arc_state_multilist_index_func(multilist_t *ml, void *obj) { arc_buf_hdr_t *hdr = obj; /* * We rely on b_dva to generate evenly distributed index * numbers using buf_hash below. So, as an added precaution, * let's make sure we never add empty buffers to the arc lists. */ ASSERT(!HDR_EMPTY(hdr)); /* * The assumption here, is the hash value for a given * arc_buf_hdr_t will remain constant throughout its lifetime * (i.e. its b_spa, b_dva, and b_birth fields don't change). * Thus, we don't need to store the header's sublist index * on insertion, as this index can be recalculated on removal. * * Also, the low order bits of the hash value are thought to be * distributed evenly. Otherwise, in the case that the multilist * has a power of two number of sublists, each sublists' usage * would not be evenly distributed. In this context full 64bit * division would be a waste of time, so limit it to 32 bits. */ return ((unsigned int)buf_hash(hdr->b_spa, &hdr->b_dva, hdr->b_birth) % multilist_get_num_sublists(ml)); } static unsigned int arc_state_l2c_multilist_index_func(multilist_t *ml, void *obj) { panic("Header %p insert into arc_l2c_only %p", obj, ml); } #define WARN_IF_TUNING_IGNORED(tuning, value, do_warn) do { \ if ((do_warn) && (tuning) && ((tuning) != (value))) { \ cmn_err(CE_WARN, \ "ignoring tunable %s (using %llu instead)", \ (#tuning), (u_longlong_t)(value)); \ } \ } while (0) /* * Called during module initialization and periodically thereafter to * apply reasonable changes to the exposed performance tunings. Can also be * called explicitly by param_set_arc_*() functions when ARC tunables are * updated manually. Non-zero zfs_* values which differ from the currently set * values will be applied. */ void arc_tuning_update(boolean_t verbose) { uint64_t allmem = arc_all_memory(); /* Valid range: 32M - */ if ((zfs_arc_min) && (zfs_arc_min != arc_c_min) && (zfs_arc_min >= 2ULL << SPA_MAXBLOCKSHIFT) && (zfs_arc_min <= arc_c_max)) { arc_c_min = zfs_arc_min; arc_c = MAX(arc_c, arc_c_min); } WARN_IF_TUNING_IGNORED(zfs_arc_min, arc_c_min, verbose); /* Valid range: 64M - */ if ((zfs_arc_max) && (zfs_arc_max != arc_c_max) && (zfs_arc_max >= MIN_ARC_MAX) && (zfs_arc_max < allmem) && (zfs_arc_max > arc_c_min)) { arc_c_max = zfs_arc_max; arc_c = MIN(arc_c, arc_c_max); if (arc_dnode_limit > arc_c_max) arc_dnode_limit = arc_c_max; } WARN_IF_TUNING_IGNORED(zfs_arc_max, arc_c_max, verbose); /* Valid range: 0 - */ arc_dnode_limit = zfs_arc_dnode_limit ? zfs_arc_dnode_limit : MIN(zfs_arc_dnode_limit_percent, 100) * arc_c_max / 100; WARN_IF_TUNING_IGNORED(zfs_arc_dnode_limit, arc_dnode_limit, verbose); /* Valid range: 1 - N */ if (zfs_arc_grow_retry) arc_grow_retry = zfs_arc_grow_retry; /* Valid range: 1 - N */ if (zfs_arc_shrink_shift) { arc_shrink_shift = zfs_arc_shrink_shift; arc_no_grow_shift = MIN(arc_no_grow_shift, arc_shrink_shift -1); } /* Valid range: 1 - N ms */ if (zfs_arc_min_prefetch_ms) arc_min_prefetch_ms = zfs_arc_min_prefetch_ms; /* Valid range: 1 - N ms */ if (zfs_arc_min_prescient_prefetch_ms) { arc_min_prescient_prefetch_ms = zfs_arc_min_prescient_prefetch_ms; } /* Valid range: 0 - 100 */ if (zfs_arc_lotsfree_percent <= 100) arc_lotsfree_percent = zfs_arc_lotsfree_percent; WARN_IF_TUNING_IGNORED(zfs_arc_lotsfree_percent, arc_lotsfree_percent, verbose); /* Valid range: 0 - */ if ((zfs_arc_sys_free) && (zfs_arc_sys_free != arc_sys_free)) arc_sys_free = MIN(zfs_arc_sys_free, allmem); WARN_IF_TUNING_IGNORED(zfs_arc_sys_free, arc_sys_free, verbose); } static void arc_state_multilist_init(multilist_t *ml, multilist_sublist_index_func_t *index_func, int *maxcountp) { multilist_create(ml, sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_l1hdr.b_arc_node), index_func); *maxcountp = MAX(*maxcountp, multilist_get_num_sublists(ml)); } static void arc_state_init(void) { int num_sublists = 0; arc_state_multilist_init(&arc_mru->arcs_list[ARC_BUFC_METADATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mru->arcs_list[ARC_BUFC_DATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mru_ghost->arcs_list[ARC_BUFC_METADATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mru_ghost->arcs_list[ARC_BUFC_DATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mfu->arcs_list[ARC_BUFC_METADATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mfu->arcs_list[ARC_BUFC_DATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mfu_ghost->arcs_list[ARC_BUFC_METADATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_mfu_ghost->arcs_list[ARC_BUFC_DATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_uncached->arcs_list[ARC_BUFC_METADATA], arc_state_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_uncached->arcs_list[ARC_BUFC_DATA], arc_state_multilist_index_func, &num_sublists); /* * L2 headers should never be on the L2 state list since they don't * have L1 headers allocated. Special index function asserts that. */ arc_state_multilist_init(&arc_l2c_only->arcs_list[ARC_BUFC_METADATA], arc_state_l2c_multilist_index_func, &num_sublists); arc_state_multilist_init(&arc_l2c_only->arcs_list[ARC_BUFC_DATA], arc_state_l2c_multilist_index_func, &num_sublists); /* * Keep track of the number of markers needed to reclaim buffers from * any ARC state. The markers will be pre-allocated so as to minimize * the number of memory allocations performed by the eviction thread. */ arc_state_evict_marker_count = num_sublists; zfs_refcount_create(&arc_anon->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_anon->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mru->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mru->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mru_ghost->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mru_ghost->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mfu->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mfu_ghost->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mfu_ghost->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_l2c_only->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_l2c_only->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_uncached->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_uncached->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_create(&arc_anon->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_anon->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mru->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mru->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mru_ghost->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mru_ghost->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mfu->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mfu->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_mfu_ghost->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_mfu_ghost->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_l2c_only->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_l2c_only->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_create(&arc_uncached->arcs_size[ARC_BUFC_DATA]); zfs_refcount_create(&arc_uncached->arcs_size[ARC_BUFC_METADATA]); wmsum_init(&arc_mru_ghost->arcs_hits[ARC_BUFC_DATA], 0); wmsum_init(&arc_mru_ghost->arcs_hits[ARC_BUFC_METADATA], 0); wmsum_init(&arc_mfu_ghost->arcs_hits[ARC_BUFC_DATA], 0); wmsum_init(&arc_mfu_ghost->arcs_hits[ARC_BUFC_METADATA], 0); wmsum_init(&arc_sums.arcstat_hits, 0); wmsum_init(&arc_sums.arcstat_iohits, 0); wmsum_init(&arc_sums.arcstat_misses, 0); wmsum_init(&arc_sums.arcstat_demand_data_hits, 0); wmsum_init(&arc_sums.arcstat_demand_data_iohits, 0); wmsum_init(&arc_sums.arcstat_demand_data_misses, 0); wmsum_init(&arc_sums.arcstat_demand_metadata_hits, 0); wmsum_init(&arc_sums.arcstat_demand_metadata_iohits, 0); wmsum_init(&arc_sums.arcstat_demand_metadata_misses, 0); wmsum_init(&arc_sums.arcstat_prefetch_data_hits, 0); wmsum_init(&arc_sums.arcstat_prefetch_data_iohits, 0); wmsum_init(&arc_sums.arcstat_prefetch_data_misses, 0); wmsum_init(&arc_sums.arcstat_prefetch_metadata_hits, 0); wmsum_init(&arc_sums.arcstat_prefetch_metadata_iohits, 0); wmsum_init(&arc_sums.arcstat_prefetch_metadata_misses, 0); wmsum_init(&arc_sums.arcstat_mru_hits, 0); wmsum_init(&arc_sums.arcstat_mru_ghost_hits, 0); wmsum_init(&arc_sums.arcstat_mfu_hits, 0); wmsum_init(&arc_sums.arcstat_mfu_ghost_hits, 0); wmsum_init(&arc_sums.arcstat_uncached_hits, 0); wmsum_init(&arc_sums.arcstat_deleted, 0); wmsum_init(&arc_sums.arcstat_mutex_miss, 0); wmsum_init(&arc_sums.arcstat_access_skip, 0); wmsum_init(&arc_sums.arcstat_evict_skip, 0); wmsum_init(&arc_sums.arcstat_evict_not_enough, 0); wmsum_init(&arc_sums.arcstat_evict_l2_cached, 0); wmsum_init(&arc_sums.arcstat_evict_l2_eligible, 0); wmsum_init(&arc_sums.arcstat_evict_l2_eligible_mfu, 0); wmsum_init(&arc_sums.arcstat_evict_l2_eligible_mru, 0); wmsum_init(&arc_sums.arcstat_evict_l2_ineligible, 0); wmsum_init(&arc_sums.arcstat_evict_l2_skip, 0); wmsum_init(&arc_sums.arcstat_hash_collisions, 0); wmsum_init(&arc_sums.arcstat_hash_chains, 0); aggsum_init(&arc_sums.arcstat_size, 0); wmsum_init(&arc_sums.arcstat_compressed_size, 0); wmsum_init(&arc_sums.arcstat_uncompressed_size, 0); wmsum_init(&arc_sums.arcstat_overhead_size, 0); wmsum_init(&arc_sums.arcstat_hdr_size, 0); wmsum_init(&arc_sums.arcstat_data_size, 0); wmsum_init(&arc_sums.arcstat_metadata_size, 0); wmsum_init(&arc_sums.arcstat_dbuf_size, 0); wmsum_init(&arc_sums.arcstat_dnode_size, 0); wmsum_init(&arc_sums.arcstat_bonus_size, 0); wmsum_init(&arc_sums.arcstat_l2_hits, 0); wmsum_init(&arc_sums.arcstat_l2_misses, 0); wmsum_init(&arc_sums.arcstat_l2_prefetch_asize, 0); wmsum_init(&arc_sums.arcstat_l2_mru_asize, 0); wmsum_init(&arc_sums.arcstat_l2_mfu_asize, 0); wmsum_init(&arc_sums.arcstat_l2_bufc_data_asize, 0); wmsum_init(&arc_sums.arcstat_l2_bufc_metadata_asize, 0); wmsum_init(&arc_sums.arcstat_l2_feeds, 0); wmsum_init(&arc_sums.arcstat_l2_rw_clash, 0); wmsum_init(&arc_sums.arcstat_l2_read_bytes, 0); wmsum_init(&arc_sums.arcstat_l2_write_bytes, 0); wmsum_init(&arc_sums.arcstat_l2_writes_sent, 0); wmsum_init(&arc_sums.arcstat_l2_writes_done, 0); wmsum_init(&arc_sums.arcstat_l2_writes_error, 0); wmsum_init(&arc_sums.arcstat_l2_writes_lock_retry, 0); wmsum_init(&arc_sums.arcstat_l2_evict_lock_retry, 0); wmsum_init(&arc_sums.arcstat_l2_evict_reading, 0); wmsum_init(&arc_sums.arcstat_l2_evict_l1cached, 0); wmsum_init(&arc_sums.arcstat_l2_free_on_write, 0); wmsum_init(&arc_sums.arcstat_l2_abort_lowmem, 0); wmsum_init(&arc_sums.arcstat_l2_cksum_bad, 0); wmsum_init(&arc_sums.arcstat_l2_io_error, 0); wmsum_init(&arc_sums.arcstat_l2_lsize, 0); wmsum_init(&arc_sums.arcstat_l2_psize, 0); aggsum_init(&arc_sums.arcstat_l2_hdr_size, 0); wmsum_init(&arc_sums.arcstat_l2_log_blk_writes, 0); wmsum_init(&arc_sums.arcstat_l2_log_blk_asize, 0); wmsum_init(&arc_sums.arcstat_l2_log_blk_count, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_success, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_abort_unsupported, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_abort_io_errors, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_abort_dh_errors, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_abort_cksum_lb_errors, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_abort_lowmem, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_size, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_asize, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_bufs, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_bufs_precached, 0); wmsum_init(&arc_sums.arcstat_l2_rebuild_log_blks, 0); wmsum_init(&arc_sums.arcstat_memory_throttle_count, 0); wmsum_init(&arc_sums.arcstat_memory_direct_count, 0); wmsum_init(&arc_sums.arcstat_memory_indirect_count, 0); wmsum_init(&arc_sums.arcstat_prune, 0); wmsum_init(&arc_sums.arcstat_meta_used, 0); wmsum_init(&arc_sums.arcstat_async_upgrade_sync, 0); wmsum_init(&arc_sums.arcstat_predictive_prefetch, 0); wmsum_init(&arc_sums.arcstat_demand_hit_predictive_prefetch, 0); wmsum_init(&arc_sums.arcstat_demand_iohit_predictive_prefetch, 0); wmsum_init(&arc_sums.arcstat_prescient_prefetch, 0); wmsum_init(&arc_sums.arcstat_demand_hit_prescient_prefetch, 0); wmsum_init(&arc_sums.arcstat_demand_iohit_prescient_prefetch, 0); wmsum_init(&arc_sums.arcstat_raw_size, 0); wmsum_init(&arc_sums.arcstat_cached_only_in_progress, 0); wmsum_init(&arc_sums.arcstat_abd_chunk_waste_size, 0); arc_anon->arcs_state = ARC_STATE_ANON; arc_mru->arcs_state = ARC_STATE_MRU; arc_mru_ghost->arcs_state = ARC_STATE_MRU_GHOST; arc_mfu->arcs_state = ARC_STATE_MFU; arc_mfu_ghost->arcs_state = ARC_STATE_MFU_GHOST; arc_l2c_only->arcs_state = ARC_STATE_L2C_ONLY; arc_uncached->arcs_state = ARC_STATE_UNCACHED; } static void arc_state_fini(void) { zfs_refcount_destroy(&arc_anon->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_anon->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mru->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mru->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mru_ghost->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mru_ghost->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mfu->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mfu_ghost->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mfu_ghost->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_l2c_only->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_l2c_only->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_uncached->arcs_esize[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_uncached->arcs_esize[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_anon->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_anon->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mru->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mru->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mru_ghost->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mru_ghost->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mfu->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mfu->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_mfu_ghost->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_mfu_ghost->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_l2c_only->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_l2c_only->arcs_size[ARC_BUFC_METADATA]); zfs_refcount_destroy(&arc_uncached->arcs_size[ARC_BUFC_DATA]); zfs_refcount_destroy(&arc_uncached->arcs_size[ARC_BUFC_METADATA]); multilist_destroy(&arc_mru->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_mru_ghost->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_mfu->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_mfu_ghost->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_mru->arcs_list[ARC_BUFC_DATA]); multilist_destroy(&arc_mru_ghost->arcs_list[ARC_BUFC_DATA]); multilist_destroy(&arc_mfu->arcs_list[ARC_BUFC_DATA]); multilist_destroy(&arc_mfu_ghost->arcs_list[ARC_BUFC_DATA]); multilist_destroy(&arc_l2c_only->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_l2c_only->arcs_list[ARC_BUFC_DATA]); multilist_destroy(&arc_uncached->arcs_list[ARC_BUFC_METADATA]); multilist_destroy(&arc_uncached->arcs_list[ARC_BUFC_DATA]); wmsum_fini(&arc_mru_ghost->arcs_hits[ARC_BUFC_DATA]); wmsum_fini(&arc_mru_ghost->arcs_hits[ARC_BUFC_METADATA]); wmsum_fini(&arc_mfu_ghost->arcs_hits[ARC_BUFC_DATA]); wmsum_fini(&arc_mfu_ghost->arcs_hits[ARC_BUFC_METADATA]); wmsum_fini(&arc_sums.arcstat_hits); wmsum_fini(&arc_sums.arcstat_iohits); wmsum_fini(&arc_sums.arcstat_misses); wmsum_fini(&arc_sums.arcstat_demand_data_hits); wmsum_fini(&arc_sums.arcstat_demand_data_iohits); wmsum_fini(&arc_sums.arcstat_demand_data_misses); wmsum_fini(&arc_sums.arcstat_demand_metadata_hits); wmsum_fini(&arc_sums.arcstat_demand_metadata_iohits); wmsum_fini(&arc_sums.arcstat_demand_metadata_misses); wmsum_fini(&arc_sums.arcstat_prefetch_data_hits); wmsum_fini(&arc_sums.arcstat_prefetch_data_iohits); wmsum_fini(&arc_sums.arcstat_prefetch_data_misses); wmsum_fini(&arc_sums.arcstat_prefetch_metadata_hits); wmsum_fini(&arc_sums.arcstat_prefetch_metadata_iohits); wmsum_fini(&arc_sums.arcstat_prefetch_metadata_misses); wmsum_fini(&arc_sums.arcstat_mru_hits); wmsum_fini(&arc_sums.arcstat_mru_ghost_hits); wmsum_fini(&arc_sums.arcstat_mfu_hits); wmsum_fini(&arc_sums.arcstat_mfu_ghost_hits); wmsum_fini(&arc_sums.arcstat_uncached_hits); wmsum_fini(&arc_sums.arcstat_deleted); wmsum_fini(&arc_sums.arcstat_mutex_miss); wmsum_fini(&arc_sums.arcstat_access_skip); wmsum_fini(&arc_sums.arcstat_evict_skip); wmsum_fini(&arc_sums.arcstat_evict_not_enough); wmsum_fini(&arc_sums.arcstat_evict_l2_cached); wmsum_fini(&arc_sums.arcstat_evict_l2_eligible); wmsum_fini(&arc_sums.arcstat_evict_l2_eligible_mfu); wmsum_fini(&arc_sums.arcstat_evict_l2_eligible_mru); wmsum_fini(&arc_sums.arcstat_evict_l2_ineligible); wmsum_fini(&arc_sums.arcstat_evict_l2_skip); wmsum_fini(&arc_sums.arcstat_hash_collisions); wmsum_fini(&arc_sums.arcstat_hash_chains); aggsum_fini(&arc_sums.arcstat_size); wmsum_fini(&arc_sums.arcstat_compressed_size); wmsum_fini(&arc_sums.arcstat_uncompressed_size); wmsum_fini(&arc_sums.arcstat_overhead_size); wmsum_fini(&arc_sums.arcstat_hdr_size); wmsum_fini(&arc_sums.arcstat_data_size); wmsum_fini(&arc_sums.arcstat_metadata_size); wmsum_fini(&arc_sums.arcstat_dbuf_size); wmsum_fini(&arc_sums.arcstat_dnode_size); wmsum_fini(&arc_sums.arcstat_bonus_size); wmsum_fini(&arc_sums.arcstat_l2_hits); wmsum_fini(&arc_sums.arcstat_l2_misses); wmsum_fini(&arc_sums.arcstat_l2_prefetch_asize); wmsum_fini(&arc_sums.arcstat_l2_mru_asize); wmsum_fini(&arc_sums.arcstat_l2_mfu_asize); wmsum_fini(&arc_sums.arcstat_l2_bufc_data_asize); wmsum_fini(&arc_sums.arcstat_l2_bufc_metadata_asize); wmsum_fini(&arc_sums.arcstat_l2_feeds); wmsum_fini(&arc_sums.arcstat_l2_rw_clash); wmsum_fini(&arc_sums.arcstat_l2_read_bytes); wmsum_fini(&arc_sums.arcstat_l2_write_bytes); wmsum_fini(&arc_sums.arcstat_l2_writes_sent); wmsum_fini(&arc_sums.arcstat_l2_writes_done); wmsum_fini(&arc_sums.arcstat_l2_writes_error); wmsum_fini(&arc_sums.arcstat_l2_writes_lock_retry); wmsum_fini(&arc_sums.arcstat_l2_evict_lock_retry); wmsum_fini(&arc_sums.arcstat_l2_evict_reading); wmsum_fini(&arc_sums.arcstat_l2_evict_l1cached); wmsum_fini(&arc_sums.arcstat_l2_free_on_write); wmsum_fini(&arc_sums.arcstat_l2_abort_lowmem); wmsum_fini(&arc_sums.arcstat_l2_cksum_bad); wmsum_fini(&arc_sums.arcstat_l2_io_error); wmsum_fini(&arc_sums.arcstat_l2_lsize); wmsum_fini(&arc_sums.arcstat_l2_psize); aggsum_fini(&arc_sums.arcstat_l2_hdr_size); wmsum_fini(&arc_sums.arcstat_l2_log_blk_writes); wmsum_fini(&arc_sums.arcstat_l2_log_blk_asize); wmsum_fini(&arc_sums.arcstat_l2_log_blk_count); wmsum_fini(&arc_sums.arcstat_l2_rebuild_success); wmsum_fini(&arc_sums.arcstat_l2_rebuild_abort_unsupported); wmsum_fini(&arc_sums.arcstat_l2_rebuild_abort_io_errors); wmsum_fini(&arc_sums.arcstat_l2_rebuild_abort_dh_errors); wmsum_fini(&arc_sums.arcstat_l2_rebuild_abort_cksum_lb_errors); wmsum_fini(&arc_sums.arcstat_l2_rebuild_abort_lowmem); wmsum_fini(&arc_sums.arcstat_l2_rebuild_size); wmsum_fini(&arc_sums.arcstat_l2_rebuild_asize); wmsum_fini(&arc_sums.arcstat_l2_rebuild_bufs); wmsum_fini(&arc_sums.arcstat_l2_rebuild_bufs_precached); wmsum_fini(&arc_sums.arcstat_l2_rebuild_log_blks); wmsum_fini(&arc_sums.arcstat_memory_throttle_count); wmsum_fini(&arc_sums.arcstat_memory_direct_count); wmsum_fini(&arc_sums.arcstat_memory_indirect_count); wmsum_fini(&arc_sums.arcstat_prune); wmsum_fini(&arc_sums.arcstat_meta_used); wmsum_fini(&arc_sums.arcstat_async_upgrade_sync); wmsum_fini(&arc_sums.arcstat_predictive_prefetch); wmsum_fini(&arc_sums.arcstat_demand_hit_predictive_prefetch); wmsum_fini(&arc_sums.arcstat_demand_iohit_predictive_prefetch); wmsum_fini(&arc_sums.arcstat_prescient_prefetch); wmsum_fini(&arc_sums.arcstat_demand_hit_prescient_prefetch); wmsum_fini(&arc_sums.arcstat_demand_iohit_prescient_prefetch); wmsum_fini(&arc_sums.arcstat_raw_size); wmsum_fini(&arc_sums.arcstat_cached_only_in_progress); wmsum_fini(&arc_sums.arcstat_abd_chunk_waste_size); } uint64_t arc_target_bytes(void) { return (arc_c); } void arc_set_limits(uint64_t allmem) { /* Set min cache to 1/32 of all memory, or 32MB, whichever is more. */ arc_c_min = MAX(allmem / 32, 2ULL << SPA_MAXBLOCKSHIFT); /* How to set default max varies by platform. */ arc_c_max = arc_default_max(arc_c_min, allmem); } void arc_init(void) { uint64_t percent, allmem = arc_all_memory(); mutex_init(&arc_evict_lock, NULL, MUTEX_DEFAULT, NULL); list_create(&arc_evict_waiters, sizeof (arc_evict_waiter_t), offsetof(arc_evict_waiter_t, aew_node)); arc_min_prefetch_ms = 1000; arc_min_prescient_prefetch_ms = 6000; #if defined(_KERNEL) arc_lowmem_init(); #endif arc_set_limits(allmem); #ifdef _KERNEL /* * If zfs_arc_max is non-zero at init, meaning it was set in the kernel * environment before the module was loaded, don't block setting the * maximum because it is less than arc_c_min, instead, reset arc_c_min * to a lower value. * zfs_arc_min will be handled by arc_tuning_update(). */ if (zfs_arc_max != 0 && zfs_arc_max >= MIN_ARC_MAX && zfs_arc_max < allmem) { arc_c_max = zfs_arc_max; if (arc_c_min >= arc_c_max) { arc_c_min = MAX(zfs_arc_max / 2, 2ULL << SPA_MAXBLOCKSHIFT); } } #else /* * In userland, there's only the memory pressure that we artificially * create (see arc_available_memory()). Don't let arc_c get too * small, because it can cause transactions to be larger than * arc_c, causing arc_tempreserve_space() to fail. */ arc_c_min = MAX(arc_c_max / 2, 2ULL << SPA_MAXBLOCKSHIFT); #endif arc_c = arc_c_min; /* * 32-bit fixed point fractions of metadata from total ARC size, * MRU data from all data and MRU metadata from all metadata. */ arc_meta = (1ULL << 32) / 4; /* Metadata is 25% of arc_c. */ arc_pd = (1ULL << 32) / 2; /* Data MRU is 50% of data. */ arc_pm = (1ULL << 32) / 2; /* Metadata MRU is 50% of metadata. */ percent = MIN(zfs_arc_dnode_limit_percent, 100); arc_dnode_limit = arc_c_max * percent / 100; /* Apply user specified tunings */ arc_tuning_update(B_TRUE); /* if kmem_flags are set, lets try to use less memory */ if (kmem_debugging()) arc_c = arc_c / 2; if (arc_c < arc_c_min) arc_c = arc_c_min; arc_register_hotplug(); arc_state_init(); buf_init(); list_create(&arc_prune_list, sizeof (arc_prune_t), offsetof(arc_prune_t, p_node)); mutex_init(&arc_prune_mtx, NULL, MUTEX_DEFAULT, NULL); arc_prune_taskq = taskq_create("arc_prune", zfs_arc_prune_task_threads, defclsyspri, 100, INT_MAX, TASKQ_PREPOPULATE | TASKQ_DYNAMIC); arc_ksp = kstat_create("zfs", 0, "arcstats", "misc", KSTAT_TYPE_NAMED, sizeof (arc_stats) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL); if (arc_ksp != NULL) { arc_ksp->ks_data = &arc_stats; arc_ksp->ks_update = arc_kstat_update; kstat_install(arc_ksp); } arc_state_evict_markers = arc_state_alloc_markers(arc_state_evict_marker_count); arc_evict_zthr = zthr_create_timer("arc_evict", arc_evict_cb_check, arc_evict_cb, NULL, SEC2NSEC(1), defclsyspri); arc_reap_zthr = zthr_create_timer("arc_reap", arc_reap_cb_check, arc_reap_cb, NULL, SEC2NSEC(1), minclsyspri); arc_warm = B_FALSE; /* * Calculate maximum amount of dirty data per pool. * * If it has been set by a module parameter, take that. * Otherwise, use a percentage of physical memory defined by * zfs_dirty_data_max_percent (default 10%) with a cap at * zfs_dirty_data_max_max (default 4G or 25% of physical memory). */ #ifdef __LP64__ if (zfs_dirty_data_max_max == 0) zfs_dirty_data_max_max = MIN(4ULL * 1024 * 1024 * 1024, allmem * zfs_dirty_data_max_max_percent / 100); #else if (zfs_dirty_data_max_max == 0) zfs_dirty_data_max_max = MIN(1ULL * 1024 * 1024 * 1024, allmem * zfs_dirty_data_max_max_percent / 100); #endif if (zfs_dirty_data_max == 0) { zfs_dirty_data_max = allmem * zfs_dirty_data_max_percent / 100; zfs_dirty_data_max = MIN(zfs_dirty_data_max, zfs_dirty_data_max_max); } if (zfs_wrlog_data_max == 0) { /* * dp_wrlog_total is reduced for each txg at the end of * spa_sync(). However, dp_dirty_total is reduced every time * a block is written out. Thus under normal operation, * dp_wrlog_total could grow 2 times as big as * zfs_dirty_data_max. */ zfs_wrlog_data_max = zfs_dirty_data_max * 2; } } void arc_fini(void) { arc_prune_t *p; #ifdef _KERNEL arc_lowmem_fini(); #endif /* _KERNEL */ /* Use B_TRUE to ensure *all* buffers are evicted */ arc_flush(NULL, B_TRUE); if (arc_ksp != NULL) { kstat_delete(arc_ksp); arc_ksp = NULL; } taskq_wait(arc_prune_taskq); taskq_destroy(arc_prune_taskq); mutex_enter(&arc_prune_mtx); while ((p = list_remove_head(&arc_prune_list)) != NULL) { (void) zfs_refcount_remove(&p->p_refcnt, &arc_prune_list); zfs_refcount_destroy(&p->p_refcnt); kmem_free(p, sizeof (*p)); } mutex_exit(&arc_prune_mtx); list_destroy(&arc_prune_list); mutex_destroy(&arc_prune_mtx); (void) zthr_cancel(arc_evict_zthr); (void) zthr_cancel(arc_reap_zthr); arc_state_free_markers(arc_state_evict_markers, arc_state_evict_marker_count); mutex_destroy(&arc_evict_lock); list_destroy(&arc_evict_waiters); /* * Free any buffers that were tagged for destruction. This needs * to occur before arc_state_fini() runs and destroys the aggsum * values which are updated when freeing scatter ABDs. */ l2arc_do_free_on_write(); /* * buf_fini() must proceed arc_state_fini() because buf_fin() may * trigger the release of kmem magazines, which can callback to * arc_space_return() which accesses aggsums freed in act_state_fini(). */ buf_fini(); arc_state_fini(); arc_unregister_hotplug(); /* * We destroy the zthrs after all the ARC state has been * torn down to avoid the case of them receiving any * wakeup() signals after they are destroyed. */ zthr_destroy(arc_evict_zthr); zthr_destroy(arc_reap_zthr); ASSERT0(arc_loaned_bytes); } /* * Level 2 ARC * * The level 2 ARC (L2ARC) is a cache layer in-between main memory and disk. * It uses dedicated storage devices to hold cached data, which are populated * using large infrequent writes. The main role of this cache is to boost * the performance of random read workloads. The intended L2ARC devices * include short-stroked disks, solid state disks, and other media with * substantially faster read latency than disk. * * +-----------------------+ * | ARC | * +-----------------------+ * | ^ ^ * | | | * l2arc_feed_thread() arc_read() * | | | * | l2arc read | * V | | * +---------------+ | * | L2ARC | | * +---------------+ | * | ^ | * l2arc_write() | | * | | | * V | | * +-------+ +-------+ * | vdev | | vdev | * | cache | | cache | * +-------+ +-------+ * +=========+ .-----. * : L2ARC : |-_____-| * : devices : | Disks | * +=========+ `-_____-' * * Read requests are satisfied from the following sources, in order: * * 1) ARC * 2) vdev cache of L2ARC devices * 3) L2ARC devices * 4) vdev cache of disks * 5) disks * * Some L2ARC device types exhibit extremely slow write performance. * To accommodate for this there are some significant differences between * the L2ARC and traditional cache design: * * 1. There is no eviction path from the ARC to the L2ARC. Evictions from * the ARC behave as usual, freeing buffers and placing headers on ghost * lists. The ARC does not send buffers to the L2ARC during eviction as * this would add inflated write latencies for all ARC memory pressure. * * 2. The L2ARC attempts to cache data from the ARC before it is evicted. * It does this by periodically scanning buffers from the eviction-end of * the MFU and MRU ARC lists, copying them to the L2ARC devices if they are * not already there. It scans until a headroom of buffers is satisfied, * which itself is a buffer for ARC eviction. If a compressible buffer is * found during scanning and selected for writing to an L2ARC device, we * temporarily boost scanning headroom during the next scan cycle to make * sure we adapt to compression effects (which might significantly reduce * the data volume we write to L2ARC). The thread that does this is * l2arc_feed_thread(), illustrated below; example sizes are included to * provide a better sense of ratio than this diagram: * * head --> tail * +---------------------+----------+ * ARC_mfu |:::::#:::::::::::::::|o#o###o###|-->. # already on L2ARC * +---------------------+----------+ | o L2ARC eligible * ARC_mru |:#:::::::::::::::::::|#o#ooo####|-->| : ARC buffer * +---------------------+----------+ | * 15.9 Gbytes ^ 32 Mbytes | * headroom | * l2arc_feed_thread() * | * l2arc write hand <--[oooo]--' * | 8 Mbyte * | write max * V * +==============================+ * L2ARC dev |####|#|###|###| |####| ... | * +==============================+ * 32 Gbytes * * 3. If an ARC buffer is copied to the L2ARC but then hit instead of * evicted, then the L2ARC has cached a buffer much sooner than it probably * needed to, potentially wasting L2ARC device bandwidth and storage. It is * safe to say that this is an uncommon case, since buffers at the end of * the ARC lists have moved there due to inactivity. * * 4. If the ARC evicts faster than the L2ARC can maintain a headroom, * then the L2ARC simply misses copying some buffers. This serves as a * pressure valve to prevent heavy read workloads from both stalling the ARC * with waits and clogging the L2ARC with writes. This also helps prevent * the potential for the L2ARC to churn if it attempts to cache content too * quickly, such as during backups of the entire pool. * * 5. After system boot and before the ARC has filled main memory, there are * no evictions from the ARC and so the tails of the ARC_mfu and ARC_mru * lists can remain mostly static. Instead of searching from tail of these * lists as pictured, the l2arc_feed_thread() will search from the list heads * for eligible buffers, greatly increasing its chance of finding them. * * The L2ARC device write speed is also boosted during this time so that * the L2ARC warms up faster. Since there have been no ARC evictions yet, * there are no L2ARC reads, and no fear of degrading read performance * through increased writes. * * 6. Writes to the L2ARC devices are grouped and sent in-sequence, so that * the vdev queue can aggregate them into larger and fewer writes. Each * device is written to in a rotor fashion, sweeping writes through * available space then repeating. * * 7. The L2ARC does not store dirty content. It never needs to flush * write buffers back to disk based storage. * * 8. If an ARC buffer is written (and dirtied) which also exists in the * L2ARC, the now stale L2ARC buffer is immediately dropped. * * The performance of the L2ARC can be tweaked by a number of tunables, which * may be necessary for different workloads: * * l2arc_write_max max write bytes per interval * l2arc_write_boost extra write bytes during device warmup * l2arc_noprefetch skip caching prefetched buffers * l2arc_headroom number of max device writes to precache * l2arc_headroom_boost when we find compressed buffers during ARC * scanning, we multiply headroom by this * percentage factor for the next scan cycle, * since more compressed buffers are likely to * be present * l2arc_feed_secs seconds between L2ARC writing * * Tunables may be removed or added as future performance improvements are * integrated, and also may become zpool properties. * * There are three key functions that control how the L2ARC warms up: * * l2arc_write_eligible() check if a buffer is eligible to cache * l2arc_write_size() calculate how much to write * l2arc_write_interval() calculate sleep delay between writes * * These three functions determine what to write, how much, and how quickly * to send writes. * * L2ARC persistence: * * When writing buffers to L2ARC, we periodically add some metadata to * make sure we can pick them up after reboot, thus dramatically reducing * the impact that any downtime has on the performance of storage systems * with large caches. * * The implementation works fairly simply by integrating the following two * modifications: * * *) When writing to the L2ARC, we occasionally write a "l2arc log block", * which is an additional piece of metadata which describes what's been * written. This allows us to rebuild the arc_buf_hdr_t structures of the * main ARC buffers. There are 2 linked-lists of log blocks headed by * dh_start_lbps[2]. We alternate which chain we append to, so they are * time-wise and offset-wise interleaved, but that is an optimization rather * than for correctness. The log block also includes a pointer to the * previous block in its chain. * * *) We reserve SPA_MINBLOCKSIZE of space at the start of each L2ARC device * for our header bookkeeping purposes. This contains a device header, * which contains our top-level reference structures. We update it each * time we write a new log block, so that we're able to locate it in the * L2ARC device. If this write results in an inconsistent device header * (e.g. due to power failure), we detect this by verifying the header's * checksum and simply fail to reconstruct the L2ARC after reboot. * * Implementation diagram: * * +=== L2ARC device (not to scale) ======================================+ * | ___two newest log block pointers__.__________ | * | / \dh_start_lbps[1] | * | / \ \dh_start_lbps[0]| * |.___/__. V V | * ||L2 dev|....|lb |bufs |lb |bufs |lb |bufs |lb |bufs |lb |---(empty)---| * || hdr| ^ /^ /^ / / | * |+------+ ...--\-------/ \-----/--\------/ / | * | \--------------/ \--------------/ | * +======================================================================+ * * As can be seen on the diagram, rather than using a simple linked list, * we use a pair of linked lists with alternating elements. This is a * performance enhancement due to the fact that we only find out the * address of the next log block access once the current block has been * completely read in. Obviously, this hurts performance, because we'd be * keeping the device's I/O queue at only a 1 operation deep, thus * incurring a large amount of I/O round-trip latency. Having two lists * allows us to fetch two log blocks ahead of where we are currently * rebuilding L2ARC buffers. * * On-device data structures: * * L2ARC device header: l2arc_dev_hdr_phys_t * L2ARC log block: l2arc_log_blk_phys_t * * L2ARC reconstruction: * * When writing data, we simply write in the standard rotary fashion, * evicting buffers as we go and simply writing new data over them (writing * a new log block every now and then). This obviously means that once we * loop around the end of the device, we will start cutting into an already * committed log block (and its referenced data buffers), like so: * * current write head__ __old tail * \ / * V V * <--|bufs |lb |bufs |lb | |bufs |lb |bufs |lb |--> * ^ ^^^^^^^^^___________________________________ * | \ * <> may overwrite this blk and/or its bufs --' * * When importing the pool, we detect this situation and use it to stop * our scanning process (see l2arc_rebuild). * * There is one significant caveat to consider when rebuilding ARC contents * from an L2ARC device: what about invalidated buffers? Given the above * construction, we cannot update blocks which we've already written to amend * them to remove buffers which were invalidated. Thus, during reconstruction, * we might be populating the cache with buffers for data that's not on the * main pool anymore, or may have been overwritten! * * As it turns out, this isn't a problem. Every arc_read request includes * both the DVA and, crucially, the birth TXG of the BP the caller is * looking for. So even if the cache were populated by completely rotten * blocks for data that had been long deleted and/or overwritten, we'll * never actually return bad data from the cache, since the DVA with the * birth TXG uniquely identify a block in space and time - once created, * a block is immutable on disk. The worst thing we have done is wasted * some time and memory at l2arc rebuild to reconstruct outdated ARC * entries that will get dropped from the l2arc as it is being updated * with new blocks. * * L2ARC buffers that have been evicted by l2arc_evict() ahead of the write * hand are not restored. This is done by saving the offset (in bytes) * l2arc_evict() has evicted to in the L2ARC device header and taking it * into account when restoring buffers. */ static boolean_t l2arc_write_eligible(uint64_t spa_guid, arc_buf_hdr_t *hdr) { /* * A buffer is *not* eligible for the L2ARC if it: * 1. belongs to a different spa. * 2. is already cached on the L2ARC. * 3. has an I/O in progress (it may be an incomplete read). * 4. is flagged not eligible (zfs property). */ if (hdr->b_spa != spa_guid || HDR_HAS_L2HDR(hdr) || HDR_IO_IN_PROGRESS(hdr) || !HDR_L2CACHE(hdr)) return (B_FALSE); return (B_TRUE); } static uint64_t l2arc_write_size(l2arc_dev_t *dev) { uint64_t size; /* * Make sure our globals have meaningful values in case the user * altered them. */ size = l2arc_write_max; if (size == 0) { cmn_err(CE_NOTE, "l2arc_write_max must be greater than zero, " "resetting it to the default (%d)", L2ARC_WRITE_SIZE); size = l2arc_write_max = L2ARC_WRITE_SIZE; } if (arc_warm == B_FALSE) size += l2arc_write_boost; /* We need to add in the worst case scenario of log block overhead. */ size += l2arc_log_blk_overhead(size, dev); if (dev->l2ad_vdev->vdev_has_trim && l2arc_trim_ahead > 0) { /* * Trim ahead of the write size 64MB or (l2arc_trim_ahead/100) * times the writesize, whichever is greater. */ size += MAX(64 * 1024 * 1024, (size * l2arc_trim_ahead) / 100); } /* * Make sure the write size does not exceed the size of the cache * device. This is important in l2arc_evict(), otherwise infinite * iteration can occur. */ size = MIN(size, (dev->l2ad_end - dev->l2ad_start) / 4); size = P2ROUNDUP(size, 1ULL << dev->l2ad_vdev->vdev_ashift); return (size); } static clock_t l2arc_write_interval(clock_t began, uint64_t wanted, uint64_t wrote) { clock_t interval, next, now; /* * If the ARC lists are busy, increase our write rate; if the * lists are stale, idle back. This is achieved by checking * how much we previously wrote - if it was more than half of * what we wanted, schedule the next write much sooner. */ if (l2arc_feed_again && wrote > (wanted / 2)) interval = (hz * l2arc_feed_min_ms) / 1000; else interval = hz * l2arc_feed_secs; now = ddi_get_lbolt(); next = MAX(now, MIN(now + interval, began + interval)); return (next); } /* * Cycle through L2ARC devices. This is how L2ARC load balances. * If a device is returned, this also returns holding the spa config lock. */ static l2arc_dev_t * l2arc_dev_get_next(void) { l2arc_dev_t *first, *next = NULL; /* * Lock out the removal of spas (spa_namespace_lock), then removal * of cache devices (l2arc_dev_mtx). Once a device has been selected, * both locks will be dropped and a spa config lock held instead. */ mutex_enter(&spa_namespace_lock); mutex_enter(&l2arc_dev_mtx); /* if there are no vdevs, there is nothing to do */ if (l2arc_ndev == 0) goto out; first = NULL; next = l2arc_dev_last; do { /* loop around the list looking for a non-faulted vdev */ if (next == NULL) { next = list_head(l2arc_dev_list); } else { next = list_next(l2arc_dev_list, next); if (next == NULL) next = list_head(l2arc_dev_list); } /* if we have come back to the start, bail out */ if (first == NULL) first = next; else if (next == first) break; ASSERT3P(next, !=, NULL); } while (vdev_is_dead(next->l2ad_vdev) || next->l2ad_rebuild || next->l2ad_trim_all || next->l2ad_spa->spa_is_exporting); /* if we were unable to find any usable vdevs, return NULL */ if (vdev_is_dead(next->l2ad_vdev) || next->l2ad_rebuild || next->l2ad_trim_all || next->l2ad_spa->spa_is_exporting) next = NULL; l2arc_dev_last = next; out: mutex_exit(&l2arc_dev_mtx); /* * Grab the config lock to prevent the 'next' device from being * removed while we are writing to it. */ if (next != NULL) spa_config_enter(next->l2ad_spa, SCL_L2ARC, next, RW_READER); mutex_exit(&spa_namespace_lock); return (next); } /* * Free buffers that were tagged for destruction. */ static void l2arc_do_free_on_write(void) { l2arc_data_free_t *df; mutex_enter(&l2arc_free_on_write_mtx); while ((df = list_remove_head(l2arc_free_on_write)) != NULL) { ASSERT3P(df->l2df_abd, !=, NULL); abd_free(df->l2df_abd); kmem_free(df, sizeof (l2arc_data_free_t)); } mutex_exit(&l2arc_free_on_write_mtx); } /* * A write to a cache device has completed. Update all headers to allow * reads from these buffers to begin. */ static void l2arc_write_done(zio_t *zio) { l2arc_write_callback_t *cb; l2arc_lb_abd_buf_t *abd_buf; l2arc_lb_ptr_buf_t *lb_ptr_buf; l2arc_dev_t *dev; l2arc_dev_hdr_phys_t *l2dhdr; list_t *buflist; arc_buf_hdr_t *head, *hdr, *hdr_prev; kmutex_t *hash_lock; int64_t bytes_dropped = 0; cb = zio->io_private; ASSERT3P(cb, !=, NULL); dev = cb->l2wcb_dev; l2dhdr = dev->l2ad_dev_hdr; ASSERT3P(dev, !=, NULL); head = cb->l2wcb_head; ASSERT3P(head, !=, NULL); buflist = &dev->l2ad_buflist; ASSERT3P(buflist, !=, NULL); DTRACE_PROBE2(l2arc__iodone, zio_t *, zio, l2arc_write_callback_t *, cb); /* * All writes completed, or an error was hit. */ top: mutex_enter(&dev->l2ad_mtx); for (hdr = list_prev(buflist, head); hdr; hdr = hdr_prev) { hdr_prev = list_prev(buflist, hdr); hash_lock = HDR_LOCK(hdr); /* * We cannot use mutex_enter or else we can deadlock * with l2arc_write_buffers (due to swapping the order * the hash lock and l2ad_mtx are taken). */ if (!mutex_tryenter(hash_lock)) { /* * Missed the hash lock. We must retry so we * don't leave the ARC_FLAG_L2_WRITING bit set. */ ARCSTAT_BUMP(arcstat_l2_writes_lock_retry); /* * We don't want to rescan the headers we've * already marked as having been written out, so * we reinsert the head node so we can pick up * where we left off. */ list_remove(buflist, head); list_insert_after(buflist, hdr, head); mutex_exit(&dev->l2ad_mtx); /* * We wait for the hash lock to become available * to try and prevent busy waiting, and increase * the chance we'll be able to acquire the lock * the next time around. */ mutex_enter(hash_lock); mutex_exit(hash_lock); goto top; } /* * We could not have been moved into the arc_l2c_only * state while in-flight due to our ARC_FLAG_L2_WRITING * bit being set. Let's just ensure that's being enforced. */ ASSERT(HDR_HAS_L1HDR(hdr)); /* * Skipped - drop L2ARC entry and mark the header as no * longer L2 eligibile. */ if (zio->io_error != 0) { /* * Error - drop L2ARC entry. */ list_remove(buflist, hdr); arc_hdr_clear_flags(hdr, ARC_FLAG_HAS_L2HDR); uint64_t psize = HDR_GET_PSIZE(hdr); l2arc_hdr_arcstats_decrement(hdr); bytes_dropped += vdev_psize_to_asize(dev->l2ad_vdev, psize); (void) zfs_refcount_remove_many(&dev->l2ad_alloc, arc_hdr_size(hdr), hdr); } /* * Allow ARC to begin reads and ghost list evictions to * this L2ARC entry. */ arc_hdr_clear_flags(hdr, ARC_FLAG_L2_WRITING); mutex_exit(hash_lock); } /* * Free the allocated abd buffers for writing the log blocks. * If the zio failed reclaim the allocated space and remove the * pointers to these log blocks from the log block pointer list * of the L2ARC device. */ while ((abd_buf = list_remove_tail(&cb->l2wcb_abd_list)) != NULL) { abd_free(abd_buf->abd); zio_buf_free(abd_buf, sizeof (*abd_buf)); if (zio->io_error != 0) { lb_ptr_buf = list_remove_head(&dev->l2ad_lbptr_list); /* * L2BLK_GET_PSIZE returns aligned size for log * blocks. */ uint64_t asize = L2BLK_GET_PSIZE((lb_ptr_buf->lb_ptr)->lbp_prop); bytes_dropped += asize; ARCSTAT_INCR(arcstat_l2_log_blk_asize, -asize); ARCSTAT_BUMPDOWN(arcstat_l2_log_blk_count); zfs_refcount_remove_many(&dev->l2ad_lb_asize, asize, lb_ptr_buf); (void) zfs_refcount_remove(&dev->l2ad_lb_count, lb_ptr_buf); kmem_free(lb_ptr_buf->lb_ptr, sizeof (l2arc_log_blkptr_t)); kmem_free(lb_ptr_buf, sizeof (l2arc_lb_ptr_buf_t)); } } list_destroy(&cb->l2wcb_abd_list); if (zio->io_error != 0) { ARCSTAT_BUMP(arcstat_l2_writes_error); /* * Restore the lbps array in the header to its previous state. * If the list of log block pointers is empty, zero out the * log block pointers in the device header. */ lb_ptr_buf = list_head(&dev->l2ad_lbptr_list); for (int i = 0; i < 2; i++) { if (lb_ptr_buf == NULL) { /* * If the list is empty zero out the device * header. Otherwise zero out the second log * block pointer in the header. */ if (i == 0) { memset(l2dhdr, 0, dev->l2ad_dev_hdr_asize); } else { memset(&l2dhdr->dh_start_lbps[i], 0, sizeof (l2arc_log_blkptr_t)); } break; } memcpy(&l2dhdr->dh_start_lbps[i], lb_ptr_buf->lb_ptr, sizeof (l2arc_log_blkptr_t)); lb_ptr_buf = list_next(&dev->l2ad_lbptr_list, lb_ptr_buf); } } ARCSTAT_BUMP(arcstat_l2_writes_done); list_remove(buflist, head); ASSERT(!HDR_HAS_L1HDR(head)); kmem_cache_free(hdr_l2only_cache, head); mutex_exit(&dev->l2ad_mtx); ASSERT(dev->l2ad_vdev != NULL); vdev_space_update(dev->l2ad_vdev, -bytes_dropped, 0, 0); l2arc_do_free_on_write(); kmem_free(cb, sizeof (l2arc_write_callback_t)); } static int l2arc_untransform(zio_t *zio, l2arc_read_callback_t *cb) { int ret; spa_t *spa = zio->io_spa; arc_buf_hdr_t *hdr = cb->l2rcb_hdr; blkptr_t *bp = zio->io_bp; uint8_t salt[ZIO_DATA_SALT_LEN]; uint8_t iv[ZIO_DATA_IV_LEN]; uint8_t mac[ZIO_DATA_MAC_LEN]; boolean_t no_crypt = B_FALSE; /* * ZIL data is never be written to the L2ARC, so we don't need * special handling for its unique MAC storage. */ ASSERT3U(BP_GET_TYPE(bp), !=, DMU_OT_INTENT_LOG); ASSERT(MUTEX_HELD(HDR_LOCK(hdr))); ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); /* * If the data was encrypted, decrypt it now. Note that * we must check the bp here and not the hdr, since the * hdr does not have its encryption parameters updated * until arc_read_done(). */ if (BP_IS_ENCRYPTED(bp)) { abd_t *eabd = arc_get_data_abd(hdr, arc_hdr_size(hdr), hdr, ARC_HDR_USE_RESERVE); zio_crypt_decode_params_bp(bp, salt, iv); zio_crypt_decode_mac_bp(bp, mac); ret = spa_do_crypt_abd(B_FALSE, spa, &cb->l2rcb_zb, BP_GET_TYPE(bp), BP_GET_DEDUP(bp), BP_SHOULD_BYTESWAP(bp), salt, iv, mac, HDR_GET_PSIZE(hdr), eabd, hdr->b_l1hdr.b_pabd, &no_crypt); if (ret != 0) { arc_free_data_abd(hdr, eabd, arc_hdr_size(hdr), hdr); goto error; } /* * If we actually performed decryption, replace b_pabd * with the decrypted data. Otherwise we can just throw * our decryption buffer away. */ if (!no_crypt) { arc_free_data_abd(hdr, hdr->b_l1hdr.b_pabd, arc_hdr_size(hdr), hdr); hdr->b_l1hdr.b_pabd = eabd; zio->io_abd = eabd; } else { arc_free_data_abd(hdr, eabd, arc_hdr_size(hdr), hdr); } } /* * If the L2ARC block was compressed, but ARC compression * is disabled we decompress the data into a new buffer and * replace the existing data. */ if (HDR_GET_COMPRESS(hdr) != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr)) { abd_t *cabd = arc_get_data_abd(hdr, arc_hdr_size(hdr), hdr, ARC_HDR_USE_RESERVE); void *tmp = abd_borrow_buf(cabd, arc_hdr_size(hdr)); ret = zio_decompress_data(HDR_GET_COMPRESS(hdr), hdr->b_l1hdr.b_pabd, tmp, HDR_GET_PSIZE(hdr), HDR_GET_LSIZE(hdr), &hdr->b_complevel); if (ret != 0) { abd_return_buf_copy(cabd, tmp, arc_hdr_size(hdr)); arc_free_data_abd(hdr, cabd, arc_hdr_size(hdr), hdr); goto error; } abd_return_buf_copy(cabd, tmp, arc_hdr_size(hdr)); arc_free_data_abd(hdr, hdr->b_l1hdr.b_pabd, arc_hdr_size(hdr), hdr); hdr->b_l1hdr.b_pabd = cabd; zio->io_abd = cabd; zio->io_size = HDR_GET_LSIZE(hdr); } return (0); error: return (ret); } /* * A read to a cache device completed. Validate buffer contents before * handing over to the regular ARC routines. */ static void l2arc_read_done(zio_t *zio) { int tfm_error = 0; l2arc_read_callback_t *cb = zio->io_private; arc_buf_hdr_t *hdr; kmutex_t *hash_lock; boolean_t valid_cksum; boolean_t using_rdata = (BP_IS_ENCRYPTED(&cb->l2rcb_bp) && (cb->l2rcb_flags & ZIO_FLAG_RAW_ENCRYPT)); ASSERT3P(zio->io_vd, !=, NULL); ASSERT(zio->io_flags & ZIO_FLAG_DONT_PROPAGATE); spa_config_exit(zio->io_spa, SCL_L2ARC, zio->io_vd); ASSERT3P(cb, !=, NULL); hdr = cb->l2rcb_hdr; ASSERT3P(hdr, !=, NULL); hash_lock = HDR_LOCK(hdr); mutex_enter(hash_lock); ASSERT3P(hash_lock, ==, HDR_LOCK(hdr)); /* * If the data was read into a temporary buffer, * move it and free the buffer. */ if (cb->l2rcb_abd != NULL) { ASSERT3U(arc_hdr_size(hdr), <, zio->io_size); if (zio->io_error == 0) { if (using_rdata) { abd_copy(hdr->b_crypt_hdr.b_rabd, cb->l2rcb_abd, arc_hdr_size(hdr)); } else { abd_copy(hdr->b_l1hdr.b_pabd, cb->l2rcb_abd, arc_hdr_size(hdr)); } } /* * The following must be done regardless of whether * there was an error: * - free the temporary buffer * - point zio to the real ARC buffer * - set zio size accordingly * These are required because zio is either re-used for * an I/O of the block in the case of the error * or the zio is passed to arc_read_done() and it * needs real data. */ abd_free(cb->l2rcb_abd); zio->io_size = zio->io_orig_size = arc_hdr_size(hdr); if (using_rdata) { ASSERT(HDR_HAS_RABD(hdr)); zio->io_abd = zio->io_orig_abd = hdr->b_crypt_hdr.b_rabd; } else { ASSERT3P(hdr->b_l1hdr.b_pabd, !=, NULL); zio->io_abd = zio->io_orig_abd = hdr->b_l1hdr.b_pabd; } } ASSERT3P(zio->io_abd, !=, NULL); /* * Check this survived the L2ARC journey. */ ASSERT(zio->io_abd == hdr->b_l1hdr.b_pabd || (HDR_HAS_RABD(hdr) && zio->io_abd == hdr->b_crypt_hdr.b_rabd)); zio->io_bp_copy = cb->l2rcb_bp; /* XXX fix in L2ARC 2.0 */ zio->io_bp = &zio->io_bp_copy; /* XXX fix in L2ARC 2.0 */ zio->io_prop.zp_complevel = hdr->b_complevel; valid_cksum = arc_cksum_is_equal(hdr, zio); /* * b_rabd will always match the data as it exists on disk if it is * being used. Therefore if we are reading into b_rabd we do not * attempt to untransform the data. */ if (valid_cksum && !using_rdata) tfm_error = l2arc_untransform(zio, cb); if (valid_cksum && tfm_error == 0 && zio->io_error == 0 && !HDR_L2_EVICTED(hdr)) { mutex_exit(hash_lock); zio->io_private = hdr; arc_read_done(zio); } else { /* * Buffer didn't survive caching. Increment stats and * reissue to the original storage device. */ if (zio->io_error != 0) { ARCSTAT_BUMP(arcstat_l2_io_error); } else { zio->io_error = SET_ERROR(EIO); } if (!valid_cksum || tfm_error != 0) ARCSTAT_BUMP(arcstat_l2_cksum_bad); /* * If there's no waiter, issue an async i/o to the primary * storage now. If there *is* a waiter, the caller must * issue the i/o in a context where it's OK to block. */ if (zio->io_waiter == NULL) { zio_t *pio = zio_unique_parent(zio); void *abd = (using_rdata) ? hdr->b_crypt_hdr.b_rabd : hdr->b_l1hdr.b_pabd; ASSERT(!pio || pio->io_child_type == ZIO_CHILD_LOGICAL); zio = zio_read(pio, zio->io_spa, zio->io_bp, abd, zio->io_size, arc_read_done, hdr, zio->io_priority, cb->l2rcb_flags, &cb->l2rcb_zb); /* * Original ZIO will be freed, so we need to update * ARC header with the new ZIO pointer to be used * by zio_change_priority() in arc_read(). */ for (struct arc_callback *acb = hdr->b_l1hdr.b_acb; acb != NULL; acb = acb->acb_next) acb->acb_zio_head = zio; mutex_exit(hash_lock); zio_nowait(zio); } else { mutex_exit(hash_lock); } } kmem_free(cb, sizeof (l2arc_read_callback_t)); } /* * This is the list priority from which the L2ARC will search for pages to * cache. This is used within loops (0..3) to cycle through lists in the * desired order. This order can have a significant effect on cache * performance. * * Currently the metadata lists are hit first, MFU then MRU, followed by * the data lists. This function returns a locked list, and also returns * the lock pointer. */ static multilist_sublist_t * l2arc_sublist_lock(int list_num) { multilist_t *ml = NULL; unsigned int idx; ASSERT(list_num >= 0 && list_num < L2ARC_FEED_TYPES); switch (list_num) { case 0: ml = &arc_mfu->arcs_list[ARC_BUFC_METADATA]; break; case 1: ml = &arc_mru->arcs_list[ARC_BUFC_METADATA]; break; case 2: ml = &arc_mfu->arcs_list[ARC_BUFC_DATA]; break; case 3: ml = &arc_mru->arcs_list[ARC_BUFC_DATA]; break; default: return (NULL); } /* * Return a randomly-selected sublist. This is acceptable * because the caller feeds only a little bit of data for each * call (8MB). Subsequent calls will result in different * sublists being selected. */ idx = multilist_get_random_index(ml); return (multilist_sublist_lock_idx(ml, idx)); } /* * Calculates the maximum overhead of L2ARC metadata log blocks for a given * L2ARC write size. l2arc_evict and l2arc_write_size need to include this * overhead in processing to make sure there is enough headroom available * when writing buffers. */ static inline uint64_t l2arc_log_blk_overhead(uint64_t write_sz, l2arc_dev_t *dev) { if (dev->l2ad_log_entries == 0) { return (0); } else { uint64_t log_entries = write_sz >> SPA_MINBLOCKSHIFT; uint64_t log_blocks = (log_entries + dev->l2ad_log_entries - 1) / dev->l2ad_log_entries; return (vdev_psize_to_asize(dev->l2ad_vdev, sizeof (l2arc_log_blk_phys_t)) * log_blocks); } } /* * Evict buffers from the device write hand to the distance specified in * bytes. This distance may span populated buffers, it may span nothing. * This is clearing a region on the L2ARC device ready for writing. * If the 'all' boolean is set, every buffer is evicted. */ static void l2arc_evict(l2arc_dev_t *dev, uint64_t distance, boolean_t all) { list_t *buflist; arc_buf_hdr_t *hdr, *hdr_prev; kmutex_t *hash_lock; uint64_t taddr; l2arc_lb_ptr_buf_t *lb_ptr_buf, *lb_ptr_buf_prev; vdev_t *vd = dev->l2ad_vdev; boolean_t rerun; buflist = &dev->l2ad_buflist; top: rerun = B_FALSE; if (dev->l2ad_hand + distance > dev->l2ad_end) { /* * When there is no space to accommodate upcoming writes, * evict to the end. Then bump the write and evict hands * to the start and iterate. This iteration does not * happen indefinitely as we make sure in * l2arc_write_size() that when the write hand is reset, * the write size does not exceed the end of the device. */ rerun = B_TRUE; taddr = dev->l2ad_end; } else { taddr = dev->l2ad_hand + distance; } DTRACE_PROBE4(l2arc__evict, l2arc_dev_t *, dev, list_t *, buflist, uint64_t, taddr, boolean_t, all); if (!all) { /* * This check has to be placed after deciding whether to * iterate (rerun). */ if (dev->l2ad_first) { /* * This is the first sweep through the device. There is * nothing to evict. We have already trimmmed the * whole device. */ goto out; } else { /* * Trim the space to be evicted. */ if (vd->vdev_has_trim && dev->l2ad_evict < taddr && l2arc_trim_ahead > 0) { /* * We have to drop the spa_config lock because * vdev_trim_range() will acquire it. * l2ad_evict already accounts for the label * size. To prevent vdev_trim_ranges() from * adding it again, we subtract it from * l2ad_evict. */ spa_config_exit(dev->l2ad_spa, SCL_L2ARC, dev); vdev_trim_simple(vd, dev->l2ad_evict - VDEV_LABEL_START_SIZE, taddr - dev->l2ad_evict); spa_config_enter(dev->l2ad_spa, SCL_L2ARC, dev, RW_READER); } /* * When rebuilding L2ARC we retrieve the evict hand * from the header of the device. Of note, l2arc_evict() * does not actually delete buffers from the cache * device, but trimming may do so depending on the * hardware implementation. Thus keeping track of the * evict hand is useful. */ dev->l2ad_evict = MAX(dev->l2ad_evict, taddr); } } retry: mutex_enter(&dev->l2ad_mtx); /* * We have to account for evicted log blocks. Run vdev_space_update() * on log blocks whose offset (in bytes) is before the evicted offset * (in bytes) by searching in the list of pointers to log blocks * present in the L2ARC device. */ for (lb_ptr_buf = list_tail(&dev->l2ad_lbptr_list); lb_ptr_buf; lb_ptr_buf = lb_ptr_buf_prev) { lb_ptr_buf_prev = list_prev(&dev->l2ad_lbptr_list, lb_ptr_buf); /* L2BLK_GET_PSIZE returns aligned size for log blocks */ uint64_t asize = L2BLK_GET_PSIZE( (lb_ptr_buf->lb_ptr)->lbp_prop); /* * We don't worry about log blocks left behind (ie * lbp_payload_start < l2ad_hand) because l2arc_write_buffers() * will never write more than l2arc_evict() evicts. */ if (!all && l2arc_log_blkptr_valid(dev, lb_ptr_buf->lb_ptr)) { break; } else { vdev_space_update(vd, -asize, 0, 0); ARCSTAT_INCR(arcstat_l2_log_blk_asize, -asize); ARCSTAT_BUMPDOWN(arcstat_l2_log_blk_count); zfs_refcount_remove_many(&dev->l2ad_lb_asize, asize, lb_ptr_buf); (void) zfs_refcount_remove(&dev->l2ad_lb_count, lb_ptr_buf); list_remove(&dev->l2ad_lbptr_list, lb_ptr_buf); kmem_free(lb_ptr_buf->lb_ptr, sizeof (l2arc_log_blkptr_t)); kmem_free(lb_ptr_buf, sizeof (l2arc_lb_ptr_buf_t)); } } for (hdr = list_tail(buflist); hdr; hdr = hdr_prev) { hdr_prev = list_prev(buflist, hdr); ASSERT(!HDR_EMPTY(hdr)); hash_lock = HDR_LOCK(hdr); /* * We cannot use mutex_enter or else we can deadlock * with l2arc_write_buffers (due to swapping the order * the hash lock and l2ad_mtx are taken). */ if (!mutex_tryenter(hash_lock)) { /* * Missed the hash lock. Retry. */ ARCSTAT_BUMP(arcstat_l2_evict_lock_retry); mutex_exit(&dev->l2ad_mtx); mutex_enter(hash_lock); mutex_exit(hash_lock); goto retry; } /* * A header can't be on this list if it doesn't have L2 header. */ ASSERT(HDR_HAS_L2HDR(hdr)); /* Ensure this header has finished being written. */ ASSERT(!HDR_L2_WRITING(hdr)); ASSERT(!HDR_L2_WRITE_HEAD(hdr)); if (!all && (hdr->b_l2hdr.b_daddr >= dev->l2ad_evict || hdr->b_l2hdr.b_daddr < dev->l2ad_hand)) { /* * We've evicted to the target address, * or the end of the device. */ mutex_exit(hash_lock); break; } if (!HDR_HAS_L1HDR(hdr)) { ASSERT(!HDR_L2_READING(hdr)); /* * This doesn't exist in the ARC. Destroy. * arc_hdr_destroy() will call list_remove() * and decrement arcstat_l2_lsize. */ arc_change_state(arc_anon, hdr); arc_hdr_destroy(hdr); } else { ASSERT(hdr->b_l1hdr.b_state != arc_l2c_only); ARCSTAT_BUMP(arcstat_l2_evict_l1cached); /* * Invalidate issued or about to be issued * reads, since we may be about to write * over this location. */ if (HDR_L2_READING(hdr)) { ARCSTAT_BUMP(arcstat_l2_evict_reading); arc_hdr_set_flags(hdr, ARC_FLAG_L2_EVICTED); } arc_hdr_l2hdr_destroy(hdr); } mutex_exit(hash_lock); } mutex_exit(&dev->l2ad_mtx); out: /* * We need to check if we evict all buffers, otherwise we may iterate * unnecessarily. */ if (!all && rerun) { /* * Bump device hand to the device start if it is approaching the * end. l2arc_evict() has already evicted ahead for this case. */ dev->l2ad_hand = dev->l2ad_start; dev->l2ad_evict = dev->l2ad_start; dev->l2ad_first = B_FALSE; goto top; } if (!all) { /* * In case of cache device removal (all) the following * assertions may be violated without functional consequences * as the device is about to be removed. */ ASSERT3U(dev->l2ad_hand + distance, <=, dev->l2ad_end); if (!dev->l2ad_first) ASSERT3U(dev->l2ad_hand, <=, dev->l2ad_evict); } } /* * Handle any abd transforms that might be required for writing to the L2ARC. * If successful, this function will always return an abd with the data * transformed as it is on disk in a new abd of asize bytes. */ static int l2arc_apply_transforms(spa_t *spa, arc_buf_hdr_t *hdr, uint64_t asize, abd_t **abd_out) { int ret; abd_t *cabd = NULL, *eabd = NULL, *to_write = hdr->b_l1hdr.b_pabd; enum zio_compress compress = HDR_GET_COMPRESS(hdr); uint64_t psize = HDR_GET_PSIZE(hdr); uint64_t size = arc_hdr_size(hdr); boolean_t ismd = HDR_ISTYPE_METADATA(hdr); boolean_t bswap = (hdr->b_l1hdr.b_byteswap != DMU_BSWAP_NUMFUNCS); dsl_crypto_key_t *dck = NULL; uint8_t mac[ZIO_DATA_MAC_LEN] = { 0 }; boolean_t no_crypt = B_FALSE; ASSERT((HDR_GET_COMPRESS(hdr) != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr)) || HDR_ENCRYPTED(hdr) || HDR_SHARED_DATA(hdr) || psize != asize); ASSERT3U(psize, <=, asize); /* * If this data simply needs its own buffer, we simply allocate it * and copy the data. This may be done to eliminate a dependency on a * shared buffer or to reallocate the buffer to match asize. */ if (HDR_HAS_RABD(hdr)) { ASSERT3U(asize, >, psize); to_write = abd_alloc_for_io(asize, ismd); abd_copy(to_write, hdr->b_crypt_hdr.b_rabd, psize); abd_zero_off(to_write, psize, asize - psize); goto out; } if ((compress == ZIO_COMPRESS_OFF || HDR_COMPRESSION_ENABLED(hdr)) && !HDR_ENCRYPTED(hdr)) { ASSERT3U(size, ==, psize); to_write = abd_alloc_for_io(asize, ismd); abd_copy(to_write, hdr->b_l1hdr.b_pabd, size); if (asize > size) abd_zero_off(to_write, size, asize - size); goto out; } if (compress != ZIO_COMPRESS_OFF && !HDR_COMPRESSION_ENABLED(hdr)) { size_t bufsize = MAX(size, asize); void *buf = zio_buf_alloc(bufsize); uint64_t csize = zio_compress_data(compress, to_write, &buf, size, hdr->b_complevel); if (csize > psize) { /* * We can't re-compress the block into the original * psize. Even if it fits into asize, it does not * matter, since checksum will never match on read. */ zio_buf_free(buf, bufsize); return (SET_ERROR(EIO)); } if (asize > csize) memset((char *)buf + csize, 0, asize - csize); to_write = cabd = abd_get_from_buf(buf, bufsize); abd_take_ownership_of_buf(cabd, B_TRUE); } if (HDR_ENCRYPTED(hdr)) { eabd = abd_alloc_for_io(asize, ismd); /* * If the dataset was disowned before the buffer * made it to this point, the key to re-encrypt * it won't be available. In this case we simply * won't write the buffer to the L2ARC. */ ret = spa_keystore_lookup_key(spa, hdr->b_crypt_hdr.b_dsobj, FTAG, &dck); if (ret != 0) goto error; ret = zio_do_crypt_abd(B_TRUE, &dck->dck_key, hdr->b_crypt_hdr.b_ot, bswap, hdr->b_crypt_hdr.b_salt, hdr->b_crypt_hdr.b_iv, mac, psize, to_write, eabd, &no_crypt); if (ret != 0) goto error; if (no_crypt) abd_copy(eabd, to_write, psize); if (psize != asize) abd_zero_off(eabd, psize, asize - psize); /* assert that the MAC we got here matches the one we saved */ ASSERT0(memcmp(mac, hdr->b_crypt_hdr.b_mac, ZIO_DATA_MAC_LEN)); spa_keystore_dsl_key_rele(spa, dck, FTAG); if (to_write == cabd) abd_free(cabd); to_write = eabd; } out: ASSERT3P(to_write, !=, hdr->b_l1hdr.b_pabd); *abd_out = to_write; return (0); error: if (dck != NULL) spa_keystore_dsl_key_rele(spa, dck, FTAG); if (cabd != NULL) abd_free(cabd); if (eabd != NULL) abd_free(eabd); *abd_out = NULL; return (ret); } static void l2arc_blk_fetch_done(zio_t *zio) { l2arc_read_callback_t *cb; cb = zio->io_private; if (cb->l2rcb_abd != NULL) abd_free(cb->l2rcb_abd); kmem_free(cb, sizeof (l2arc_read_callback_t)); } /* * Find and write ARC buffers to the L2ARC device. * * An ARC_FLAG_L2_WRITING flag is set so that the L2ARC buffers are not valid * for reading until they have completed writing. * The headroom_boost is an in-out parameter used to maintain headroom boost * state between calls to this function. * * Returns the number of bytes actually written (which may be smaller than * the delta by which the device hand has changed due to alignment and the * writing of log blocks). */ static uint64_t l2arc_write_buffers(spa_t *spa, l2arc_dev_t *dev, uint64_t target_sz) { arc_buf_hdr_t *hdr, *head, *marker; uint64_t write_asize, write_psize, headroom; boolean_t full, from_head = !arc_warm; l2arc_write_callback_t *cb = NULL; zio_t *pio, *wzio; uint64_t guid = spa_load_guid(spa); l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; ASSERT3P(dev->l2ad_vdev, !=, NULL); pio = NULL; write_asize = write_psize = 0; full = B_FALSE; head = kmem_cache_alloc(hdr_l2only_cache, KM_PUSHPAGE); arc_hdr_set_flags(head, ARC_FLAG_L2_WRITE_HEAD | ARC_FLAG_HAS_L2HDR); marker = arc_state_alloc_marker(); /* * Copy buffers for L2ARC writing. */ for (int pass = 0; pass < L2ARC_FEED_TYPES; pass++) { /* * If pass == 1 or 3, we cache MRU metadata and data * respectively. */ if (l2arc_mfuonly) { if (pass == 1 || pass == 3) continue; } uint64_t passed_sz = 0; headroom = target_sz * l2arc_headroom; if (zfs_compressed_arc_enabled) headroom = (headroom * l2arc_headroom_boost) / 100; /* * Until the ARC is warm and starts to evict, read from the * head of the ARC lists rather than the tail. */ multilist_sublist_t *mls = l2arc_sublist_lock(pass); ASSERT3P(mls, !=, NULL); if (from_head) hdr = multilist_sublist_head(mls); else hdr = multilist_sublist_tail(mls); while (hdr != NULL) { kmutex_t *hash_lock; abd_t *to_write = NULL; hash_lock = HDR_LOCK(hdr); if (!mutex_tryenter(hash_lock)) { skip: /* Skip this buffer rather than waiting. */ if (from_head) hdr = multilist_sublist_next(mls, hdr); else hdr = multilist_sublist_prev(mls, hdr); continue; } passed_sz += HDR_GET_LSIZE(hdr); if (l2arc_headroom != 0 && passed_sz > headroom) { /* * Searched too far. */ mutex_exit(hash_lock); break; } if (!l2arc_write_eligible(guid, hdr)) { mutex_exit(hash_lock); goto skip; } ASSERT(HDR_HAS_L1HDR(hdr)); ASSERT3U(HDR_GET_PSIZE(hdr), >, 0); ASSERT3U(arc_hdr_size(hdr), >, 0); ASSERT(hdr->b_l1hdr.b_pabd != NULL || HDR_HAS_RABD(hdr)); uint64_t psize = HDR_GET_PSIZE(hdr); uint64_t asize = vdev_psize_to_asize(dev->l2ad_vdev, psize); /* * If the allocated size of this buffer plus the max * size for the pending log block exceeds the evicted * target size, terminate writing buffers for this run. */ if (write_asize + asize + sizeof (l2arc_log_blk_phys_t) > target_sz) { full = B_TRUE; mutex_exit(hash_lock); break; } /* * We should not sleep with sublist lock held or it * may block ARC eviction. Insert a marker to save * the position and drop the lock. */ if (from_head) { multilist_sublist_insert_after(mls, hdr, marker); } else { multilist_sublist_insert_before(mls, hdr, marker); } multilist_sublist_unlock(mls); /* * If this header has b_rabd, we can use this since it * must always match the data exactly as it exists on * disk. Otherwise, the L2ARC can normally use the * hdr's data, but if we're sharing data between the * hdr and one of its bufs, L2ARC needs its own copy of * the data so that the ZIO below can't race with the * buf consumer. To ensure that this copy will be * available for the lifetime of the ZIO and be cleaned * up afterwards, we add it to the l2arc_free_on_write * queue. If we need to apply any transforms to the * data (compression, encryption) we will also need the * extra buffer. */ if (HDR_HAS_RABD(hdr) && psize == asize) { to_write = hdr->b_crypt_hdr.b_rabd; } else if ((HDR_COMPRESSION_ENABLED(hdr) || HDR_GET_COMPRESS(hdr) == ZIO_COMPRESS_OFF) && !HDR_ENCRYPTED(hdr) && !HDR_SHARED_DATA(hdr) && psize == asize) { to_write = hdr->b_l1hdr.b_pabd; } else { int ret; arc_buf_contents_t type = arc_buf_type(hdr); ret = l2arc_apply_transforms(spa, hdr, asize, &to_write); if (ret != 0) { arc_hdr_clear_flags(hdr, ARC_FLAG_L2CACHE); mutex_exit(hash_lock); goto next; } l2arc_free_abd_on_write(to_write, asize, type); } hdr->b_l2hdr.b_dev = dev; hdr->b_l2hdr.b_daddr = dev->l2ad_hand; hdr->b_l2hdr.b_hits = 0; hdr->b_l2hdr.b_arcs_state = hdr->b_l1hdr.b_state->arcs_state; mutex_enter(&dev->l2ad_mtx); if (pio == NULL) { /* * Insert a dummy header on the buflist so * l2arc_write_done() can find where the * write buffers begin without searching. */ list_insert_head(&dev->l2ad_buflist, head); } list_insert_head(&dev->l2ad_buflist, hdr); mutex_exit(&dev->l2ad_mtx); arc_hdr_set_flags(hdr, ARC_FLAG_HAS_L2HDR | ARC_FLAG_L2_WRITING); (void) zfs_refcount_add_many(&dev->l2ad_alloc, arc_hdr_size(hdr), hdr); l2arc_hdr_arcstats_increment(hdr); boolean_t commit = l2arc_log_blk_insert(dev, hdr); mutex_exit(hash_lock); if (pio == NULL) { cb = kmem_alloc( sizeof (l2arc_write_callback_t), KM_SLEEP); cb->l2wcb_dev = dev; cb->l2wcb_head = head; list_create(&cb->l2wcb_abd_list, sizeof (l2arc_lb_abd_buf_t), offsetof(l2arc_lb_abd_buf_t, node)); pio = zio_root(spa, l2arc_write_done, cb, ZIO_FLAG_CANFAIL); } wzio = zio_write_phys(pio, dev->l2ad_vdev, dev->l2ad_hand, asize, to_write, ZIO_CHECKSUM_OFF, NULL, hdr, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_CANFAIL, B_FALSE); DTRACE_PROBE2(l2arc__write, vdev_t *, dev->l2ad_vdev, zio_t *, wzio); zio_nowait(wzio); write_psize += psize; write_asize += asize; dev->l2ad_hand += asize; vdev_space_update(dev->l2ad_vdev, asize, 0, 0); if (commit) { /* l2ad_hand will be adjusted inside. */ write_asize += l2arc_log_blk_commit(dev, pio, cb); } next: multilist_sublist_lock(mls); if (from_head) hdr = multilist_sublist_next(mls, marker); else hdr = multilist_sublist_prev(mls, marker); multilist_sublist_remove(mls, marker); } multilist_sublist_unlock(mls); if (full == B_TRUE) break; } arc_state_free_marker(marker); /* No buffers selected for writing? */ if (pio == NULL) { ASSERT0(write_psize); ASSERT(!HDR_HAS_L1HDR(head)); kmem_cache_free(hdr_l2only_cache, head); /* * Although we did not write any buffers l2ad_evict may * have advanced. */ if (dev->l2ad_evict != l2dhdr->dh_evict) l2arc_dev_hdr_update(dev); return (0); } if (!dev->l2ad_first) ASSERT3U(dev->l2ad_hand, <=, dev->l2ad_evict); ASSERT3U(write_asize, <=, target_sz); ARCSTAT_BUMP(arcstat_l2_writes_sent); ARCSTAT_INCR(arcstat_l2_write_bytes, write_psize); dev->l2ad_writing = B_TRUE; (void) zio_wait(pio); dev->l2ad_writing = B_FALSE; /* * Update the device header after the zio completes as * l2arc_write_done() may have updated the memory holding the log block * pointers in the device header. */ l2arc_dev_hdr_update(dev); return (write_asize); } static boolean_t l2arc_hdr_limit_reached(void) { int64_t s = aggsum_upper_bound(&arc_sums.arcstat_l2_hdr_size); return (arc_reclaim_needed() || (s > (arc_warm ? arc_c : arc_c_max) * l2arc_meta_percent / 100)); } /* * This thread feeds the L2ARC at regular intervals. This is the beating * heart of the L2ARC. */ static __attribute__((noreturn)) void l2arc_feed_thread(void *unused) { (void) unused; callb_cpr_t cpr; l2arc_dev_t *dev; spa_t *spa; uint64_t size, wrote; clock_t begin, next = ddi_get_lbolt(); fstrans_cookie_t cookie; CALLB_CPR_INIT(&cpr, &l2arc_feed_thr_lock, callb_generic_cpr, FTAG); mutex_enter(&l2arc_feed_thr_lock); cookie = spl_fstrans_mark(); while (l2arc_thread_exit == 0) { CALLB_CPR_SAFE_BEGIN(&cpr); (void) cv_timedwait_idle(&l2arc_feed_thr_cv, &l2arc_feed_thr_lock, next); CALLB_CPR_SAFE_END(&cpr, &l2arc_feed_thr_lock); next = ddi_get_lbolt() + hz; /* * Quick check for L2ARC devices. */ mutex_enter(&l2arc_dev_mtx); if (l2arc_ndev == 0) { mutex_exit(&l2arc_dev_mtx); continue; } mutex_exit(&l2arc_dev_mtx); begin = ddi_get_lbolt(); /* * This selects the next l2arc device to write to, and in * doing so the next spa to feed from: dev->l2ad_spa. This * will return NULL if there are now no l2arc devices or if * they are all faulted. * * If a device is returned, its spa's config lock is also * held to prevent device removal. l2arc_dev_get_next() * will grab and release l2arc_dev_mtx. */ if ((dev = l2arc_dev_get_next()) == NULL) continue; spa = dev->l2ad_spa; ASSERT3P(spa, !=, NULL); /* * If the pool is read-only then force the feed thread to * sleep a little longer. */ if (!spa_writeable(spa)) { next = ddi_get_lbolt() + 5 * l2arc_feed_secs * hz; spa_config_exit(spa, SCL_L2ARC, dev); continue; } /* * Avoid contributing to memory pressure. */ if (l2arc_hdr_limit_reached()) { ARCSTAT_BUMP(arcstat_l2_abort_lowmem); spa_config_exit(spa, SCL_L2ARC, dev); continue; } ARCSTAT_BUMP(arcstat_l2_feeds); size = l2arc_write_size(dev); /* * Evict L2ARC buffers that will be overwritten. */ l2arc_evict(dev, size, B_FALSE); /* * Write ARC buffers. */ wrote = l2arc_write_buffers(spa, dev, size); /* * Calculate interval between writes. */ next = l2arc_write_interval(begin, size, wrote); spa_config_exit(spa, SCL_L2ARC, dev); } spl_fstrans_unmark(cookie); l2arc_thread_exit = 0; cv_broadcast(&l2arc_feed_thr_cv); CALLB_CPR_EXIT(&cpr); /* drops l2arc_feed_thr_lock */ thread_exit(); } boolean_t l2arc_vdev_present(vdev_t *vd) { return (l2arc_vdev_get(vd) != NULL); } /* * Returns the l2arc_dev_t associated with a particular vdev_t or NULL if * the vdev_t isn't an L2ARC device. */ l2arc_dev_t * l2arc_vdev_get(vdev_t *vd) { l2arc_dev_t *dev; mutex_enter(&l2arc_dev_mtx); for (dev = list_head(l2arc_dev_list); dev != NULL; dev = list_next(l2arc_dev_list, dev)) { if (dev->l2ad_vdev == vd) break; } mutex_exit(&l2arc_dev_mtx); return (dev); } static void l2arc_rebuild_dev(l2arc_dev_t *dev, boolean_t reopen) { l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; uint64_t l2dhdr_asize = dev->l2ad_dev_hdr_asize; spa_t *spa = dev->l2ad_spa; /* * The L2ARC has to hold at least the payload of one log block for * them to be restored (persistent L2ARC). The payload of a log block * depends on the amount of its log entries. We always write log blocks * with 1022 entries. How many of them are committed or restored depends * on the size of the L2ARC device. Thus the maximum payload of * one log block is 1022 * SPA_MAXBLOCKSIZE = 16GB. If the L2ARC device * is less than that, we reduce the amount of committed and restored * log entries per block so as to enable persistence. */ if (dev->l2ad_end < l2arc_rebuild_blocks_min_l2size) { dev->l2ad_log_entries = 0; } else { dev->l2ad_log_entries = MIN((dev->l2ad_end - dev->l2ad_start) >> SPA_MAXBLOCKSHIFT, L2ARC_LOG_BLK_MAX_ENTRIES); } /* * Read the device header, if an error is returned do not rebuild L2ARC. */ if (l2arc_dev_hdr_read(dev) == 0 && dev->l2ad_log_entries > 0) { /* * If we are onlining a cache device (vdev_reopen) that was * still present (l2arc_vdev_present()) and rebuild is enabled, * we should evict all ARC buffers and pointers to log blocks * and reclaim their space before restoring its contents to * L2ARC. */ if (reopen) { if (!l2arc_rebuild_enabled) { return; } else { l2arc_evict(dev, 0, B_TRUE); /* start a new log block */ dev->l2ad_log_ent_idx = 0; dev->l2ad_log_blk_payload_asize = 0; dev->l2ad_log_blk_payload_start = 0; } } /* * Just mark the device as pending for a rebuild. We won't * be starting a rebuild in line here as it would block pool * import. Instead spa_load_impl will hand that off to an * async task which will call l2arc_spa_rebuild_start. */ dev->l2ad_rebuild = B_TRUE; } else if (spa_writeable(spa)) { /* * In this case TRIM the whole device if l2arc_trim_ahead > 0, * otherwise create a new header. We zero out the memory holding * the header to reset dh_start_lbps. If we TRIM the whole * device the new header will be written by * vdev_trim_l2arc_thread() at the end of the TRIM to update the * trim_state in the header too. When reading the header, if * trim_state is not VDEV_TRIM_COMPLETE and l2arc_trim_ahead > 0 * we opt to TRIM the whole device again. */ if (l2arc_trim_ahead > 0) { dev->l2ad_trim_all = B_TRUE; } else { memset(l2dhdr, 0, l2dhdr_asize); l2arc_dev_hdr_update(dev); } } } /* * Add a vdev for use by the L2ARC. By this point the spa has already * validated the vdev and opened it. */ void l2arc_add_vdev(spa_t *spa, vdev_t *vd) { l2arc_dev_t *adddev; uint64_t l2dhdr_asize; ASSERT(!l2arc_vdev_present(vd)); /* * Create a new l2arc device entry. */ adddev = vmem_zalloc(sizeof (l2arc_dev_t), KM_SLEEP); adddev->l2ad_spa = spa; adddev->l2ad_vdev = vd; /* leave extra size for an l2arc device header */ l2dhdr_asize = adddev->l2ad_dev_hdr_asize = MAX(sizeof (*adddev->l2ad_dev_hdr), 1 << vd->vdev_ashift); adddev->l2ad_start = VDEV_LABEL_START_SIZE + l2dhdr_asize; adddev->l2ad_end = VDEV_LABEL_START_SIZE + vdev_get_min_asize(vd); ASSERT3U(adddev->l2ad_start, <, adddev->l2ad_end); adddev->l2ad_hand = adddev->l2ad_start; adddev->l2ad_evict = adddev->l2ad_start; adddev->l2ad_first = B_TRUE; adddev->l2ad_writing = B_FALSE; adddev->l2ad_trim_all = B_FALSE; list_link_init(&adddev->l2ad_node); adddev->l2ad_dev_hdr = kmem_zalloc(l2dhdr_asize, KM_SLEEP); mutex_init(&adddev->l2ad_mtx, NULL, MUTEX_DEFAULT, NULL); /* * This is a list of all ARC buffers that are still valid on the * device. */ list_create(&adddev->l2ad_buflist, sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_l2hdr.b_l2node)); /* * This is a list of pointers to log blocks that are still present * on the device. */ list_create(&adddev->l2ad_lbptr_list, sizeof (l2arc_lb_ptr_buf_t), offsetof(l2arc_lb_ptr_buf_t, node)); vdev_space_update(vd, 0, 0, adddev->l2ad_end - adddev->l2ad_hand); zfs_refcount_create(&adddev->l2ad_alloc); zfs_refcount_create(&adddev->l2ad_lb_asize); zfs_refcount_create(&adddev->l2ad_lb_count); /* * Decide if dev is eligible for L2ARC rebuild or whole device * trimming. This has to happen before the device is added in the * cache device list and l2arc_dev_mtx is released. Otherwise * l2arc_feed_thread() might already start writing on the * device. */ l2arc_rebuild_dev(adddev, B_FALSE); /* * Add device to global list */ mutex_enter(&l2arc_dev_mtx); list_insert_head(l2arc_dev_list, adddev); atomic_inc_64(&l2arc_ndev); mutex_exit(&l2arc_dev_mtx); } /* * Decide if a vdev is eligible for L2ARC rebuild, called from vdev_reopen() * in case of onlining a cache device. */ void l2arc_rebuild_vdev(vdev_t *vd, boolean_t reopen) { l2arc_dev_t *dev = NULL; dev = l2arc_vdev_get(vd); ASSERT3P(dev, !=, NULL); /* * In contrast to l2arc_add_vdev() we do not have to worry about * l2arc_feed_thread() invalidating previous content when onlining a * cache device. The device parameters (l2ad*) are not cleared when * offlining the device and writing new buffers will not invalidate * all previous content. In worst case only buffers that have not had * their log block written to the device will be lost. * When onlining the cache device (ie offline->online without exporting * the pool in between) this happens: * vdev_reopen() -> vdev_open() -> l2arc_rebuild_vdev() * | | * vdev_is_dead() = B_FALSE l2ad_rebuild = B_TRUE * During the time where vdev_is_dead = B_FALSE and until l2ad_rebuild * is set to B_TRUE we might write additional buffers to the device. */ l2arc_rebuild_dev(dev, reopen); } /* * Remove a vdev from the L2ARC. */ void l2arc_remove_vdev(vdev_t *vd) { l2arc_dev_t *remdev = NULL; /* * Find the device by vdev */ remdev = l2arc_vdev_get(vd); ASSERT3P(remdev, !=, NULL); /* * Cancel any ongoing or scheduled rebuild. */ mutex_enter(&l2arc_rebuild_thr_lock); if (remdev->l2ad_rebuild_began == B_TRUE) { remdev->l2ad_rebuild_cancel = B_TRUE; while (remdev->l2ad_rebuild == B_TRUE) cv_wait(&l2arc_rebuild_thr_cv, &l2arc_rebuild_thr_lock); } mutex_exit(&l2arc_rebuild_thr_lock); /* * Remove device from global list */ mutex_enter(&l2arc_dev_mtx); list_remove(l2arc_dev_list, remdev); l2arc_dev_last = NULL; /* may have been invalidated */ atomic_dec_64(&l2arc_ndev); mutex_exit(&l2arc_dev_mtx); /* * Clear all buflists and ARC references. L2ARC device flush. */ l2arc_evict(remdev, 0, B_TRUE); list_destroy(&remdev->l2ad_buflist); ASSERT(list_is_empty(&remdev->l2ad_lbptr_list)); list_destroy(&remdev->l2ad_lbptr_list); mutex_destroy(&remdev->l2ad_mtx); zfs_refcount_destroy(&remdev->l2ad_alloc); zfs_refcount_destroy(&remdev->l2ad_lb_asize); zfs_refcount_destroy(&remdev->l2ad_lb_count); kmem_free(remdev->l2ad_dev_hdr, remdev->l2ad_dev_hdr_asize); vmem_free(remdev, sizeof (l2arc_dev_t)); } void l2arc_init(void) { l2arc_thread_exit = 0; l2arc_ndev = 0; mutex_init(&l2arc_feed_thr_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&l2arc_feed_thr_cv, NULL, CV_DEFAULT, NULL); mutex_init(&l2arc_rebuild_thr_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&l2arc_rebuild_thr_cv, NULL, CV_DEFAULT, NULL); mutex_init(&l2arc_dev_mtx, NULL, MUTEX_DEFAULT, NULL); mutex_init(&l2arc_free_on_write_mtx, NULL, MUTEX_DEFAULT, NULL); l2arc_dev_list = &L2ARC_dev_list; l2arc_free_on_write = &L2ARC_free_on_write; list_create(l2arc_dev_list, sizeof (l2arc_dev_t), offsetof(l2arc_dev_t, l2ad_node)); list_create(l2arc_free_on_write, sizeof (l2arc_data_free_t), offsetof(l2arc_data_free_t, l2df_list_node)); } void l2arc_fini(void) { mutex_destroy(&l2arc_feed_thr_lock); cv_destroy(&l2arc_feed_thr_cv); mutex_destroy(&l2arc_rebuild_thr_lock); cv_destroy(&l2arc_rebuild_thr_cv); mutex_destroy(&l2arc_dev_mtx); mutex_destroy(&l2arc_free_on_write_mtx); list_destroy(l2arc_dev_list); list_destroy(l2arc_free_on_write); } void l2arc_start(void) { if (!(spa_mode_global & SPA_MODE_WRITE)) return; (void) thread_create(NULL, 0, l2arc_feed_thread, NULL, 0, &p0, TS_RUN, defclsyspri); } void l2arc_stop(void) { if (!(spa_mode_global & SPA_MODE_WRITE)) return; mutex_enter(&l2arc_feed_thr_lock); cv_signal(&l2arc_feed_thr_cv); /* kick thread out of startup */ l2arc_thread_exit = 1; while (l2arc_thread_exit != 0) cv_wait(&l2arc_feed_thr_cv, &l2arc_feed_thr_lock); mutex_exit(&l2arc_feed_thr_lock); } /* * Punches out rebuild threads for the L2ARC devices in a spa. This should * be called after pool import from the spa async thread, since starting * these threads directly from spa_import() will make them part of the * "zpool import" context and delay process exit (and thus pool import). */ void l2arc_spa_rebuild_start(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); /* * Locate the spa's l2arc devices and kick off rebuild threads. */ for (int i = 0; i < spa->spa_l2cache.sav_count; i++) { l2arc_dev_t *dev = l2arc_vdev_get(spa->spa_l2cache.sav_vdevs[i]); if (dev == NULL) { /* Don't attempt a rebuild if the vdev is UNAVAIL */ continue; } mutex_enter(&l2arc_rebuild_thr_lock); if (dev->l2ad_rebuild && !dev->l2ad_rebuild_cancel) { dev->l2ad_rebuild_began = B_TRUE; (void) thread_create(NULL, 0, l2arc_dev_rebuild_thread, dev, 0, &p0, TS_RUN, minclsyspri); } mutex_exit(&l2arc_rebuild_thr_lock); } } /* * Main entry point for L2ARC rebuilding. */ static __attribute__((noreturn)) void l2arc_dev_rebuild_thread(void *arg) { l2arc_dev_t *dev = arg; VERIFY(!dev->l2ad_rebuild_cancel); VERIFY(dev->l2ad_rebuild); (void) l2arc_rebuild(dev); mutex_enter(&l2arc_rebuild_thr_lock); dev->l2ad_rebuild_began = B_FALSE; dev->l2ad_rebuild = B_FALSE; mutex_exit(&l2arc_rebuild_thr_lock); thread_exit(); } /* * This function implements the actual L2ARC metadata rebuild. It: * starts reading the log block chain and restores each block's contents * to memory (reconstructing arc_buf_hdr_t's). * * Operation stops under any of the following conditions: * * 1) We reach the end of the log block chain. * 2) We encounter *any* error condition (cksum errors, io errors) */ static int l2arc_rebuild(l2arc_dev_t *dev) { vdev_t *vd = dev->l2ad_vdev; spa_t *spa = vd->vdev_spa; int err = 0; l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; l2arc_log_blk_phys_t *this_lb, *next_lb; zio_t *this_io = NULL, *next_io = NULL; l2arc_log_blkptr_t lbps[2]; l2arc_lb_ptr_buf_t *lb_ptr_buf; boolean_t lock_held; this_lb = vmem_zalloc(sizeof (*this_lb), KM_SLEEP); next_lb = vmem_zalloc(sizeof (*next_lb), KM_SLEEP); /* * We prevent device removal while issuing reads to the device, * then during the rebuilding phases we drop this lock again so * that a spa_unload or device remove can be initiated - this is * safe, because the spa will signal us to stop before removing * our device and wait for us to stop. */ spa_config_enter(spa, SCL_L2ARC, vd, RW_READER); lock_held = B_TRUE; /* * Retrieve the persistent L2ARC device state. * L2BLK_GET_PSIZE returns aligned size for log blocks. */ dev->l2ad_evict = MAX(l2dhdr->dh_evict, dev->l2ad_start); dev->l2ad_hand = MAX(l2dhdr->dh_start_lbps[0].lbp_daddr + L2BLK_GET_PSIZE((&l2dhdr->dh_start_lbps[0])->lbp_prop), dev->l2ad_start); dev->l2ad_first = !!(l2dhdr->dh_flags & L2ARC_DEV_HDR_EVICT_FIRST); vd->vdev_trim_action_time = l2dhdr->dh_trim_action_time; vd->vdev_trim_state = l2dhdr->dh_trim_state; /* * In case the zfs module parameter l2arc_rebuild_enabled is false * we do not start the rebuild process. */ if (!l2arc_rebuild_enabled) goto out; /* Prepare the rebuild process */ memcpy(lbps, l2dhdr->dh_start_lbps, sizeof (lbps)); /* Start the rebuild process */ for (;;) { if (!l2arc_log_blkptr_valid(dev, &lbps[0])) break; if ((err = l2arc_log_blk_read(dev, &lbps[0], &lbps[1], this_lb, next_lb, this_io, &next_io)) != 0) goto out; /* * Our memory pressure valve. If the system is running low * on memory, rather than swamping memory with new ARC buf * hdrs, we opt not to rebuild the L2ARC. At this point, * however, we have already set up our L2ARC dev to chain in * new metadata log blocks, so the user may choose to offline/ * online the L2ARC dev at a later time (or re-import the pool) * to reconstruct it (when there's less memory pressure). */ if (l2arc_hdr_limit_reached()) { ARCSTAT_BUMP(arcstat_l2_rebuild_abort_lowmem); cmn_err(CE_NOTE, "System running low on memory, " "aborting L2ARC rebuild."); err = SET_ERROR(ENOMEM); goto out; } spa_config_exit(spa, SCL_L2ARC, vd); lock_held = B_FALSE; /* * Now that we know that the next_lb checks out alright, we * can start reconstruction from this log block. * L2BLK_GET_PSIZE returns aligned size for log blocks. */ uint64_t asize = L2BLK_GET_PSIZE((&lbps[0])->lbp_prop); l2arc_log_blk_restore(dev, this_lb, asize); /* * log block restored, include its pointer in the list of * pointers to log blocks present in the L2ARC device. */ lb_ptr_buf = kmem_zalloc(sizeof (l2arc_lb_ptr_buf_t), KM_SLEEP); lb_ptr_buf->lb_ptr = kmem_zalloc(sizeof (l2arc_log_blkptr_t), KM_SLEEP); memcpy(lb_ptr_buf->lb_ptr, &lbps[0], sizeof (l2arc_log_blkptr_t)); mutex_enter(&dev->l2ad_mtx); list_insert_tail(&dev->l2ad_lbptr_list, lb_ptr_buf); ARCSTAT_INCR(arcstat_l2_log_blk_asize, asize); ARCSTAT_BUMP(arcstat_l2_log_blk_count); zfs_refcount_add_many(&dev->l2ad_lb_asize, asize, lb_ptr_buf); zfs_refcount_add(&dev->l2ad_lb_count, lb_ptr_buf); mutex_exit(&dev->l2ad_mtx); vdev_space_update(vd, asize, 0, 0); /* * Protection against loops of log blocks: * * l2ad_hand l2ad_evict * V V * l2ad_start |=======================================| l2ad_end * -----|||----|||---|||----||| * (3) (2) (1) (0) * ---|||---|||----|||---||| * (7) (6) (5) (4) * * In this situation the pointer of log block (4) passes * l2arc_log_blkptr_valid() but the log block should not be * restored as it is overwritten by the payload of log block * (0). Only log blocks (0)-(3) should be restored. We check * whether l2ad_evict lies in between the payload starting * offset of the next log block (lbps[1].lbp_payload_start) * and the payload starting offset of the present log block * (lbps[0].lbp_payload_start). If true and this isn't the * first pass, we are looping from the beginning and we should * stop. */ if (l2arc_range_check_overlap(lbps[1].lbp_payload_start, lbps[0].lbp_payload_start, dev->l2ad_evict) && !dev->l2ad_first) goto out; kpreempt(KPREEMPT_SYNC); for (;;) { mutex_enter(&l2arc_rebuild_thr_lock); if (dev->l2ad_rebuild_cancel) { dev->l2ad_rebuild = B_FALSE; cv_signal(&l2arc_rebuild_thr_cv); mutex_exit(&l2arc_rebuild_thr_lock); err = SET_ERROR(ECANCELED); goto out; } mutex_exit(&l2arc_rebuild_thr_lock); if (spa_config_tryenter(spa, SCL_L2ARC, vd, RW_READER)) { lock_held = B_TRUE; break; } /* * L2ARC config lock held by somebody in writer, * possibly due to them trying to remove us. They'll * likely to want us to shut down, so after a little * delay, we check l2ad_rebuild_cancel and retry * the lock again. */ delay(1); } /* * Continue with the next log block. */ lbps[0] = lbps[1]; lbps[1] = this_lb->lb_prev_lbp; PTR_SWAP(this_lb, next_lb); this_io = next_io; next_io = NULL; } if (this_io != NULL) l2arc_log_blk_fetch_abort(this_io); out: if (next_io != NULL) l2arc_log_blk_fetch_abort(next_io); vmem_free(this_lb, sizeof (*this_lb)); vmem_free(next_lb, sizeof (*next_lb)); if (!l2arc_rebuild_enabled) { spa_history_log_internal(spa, "L2ARC rebuild", NULL, "disabled"); } else if (err == 0 && zfs_refcount_count(&dev->l2ad_lb_count) > 0) { ARCSTAT_BUMP(arcstat_l2_rebuild_success); spa_history_log_internal(spa, "L2ARC rebuild", NULL, "successful, restored %llu blocks", (u_longlong_t)zfs_refcount_count(&dev->l2ad_lb_count)); } else if (err == 0 && zfs_refcount_count(&dev->l2ad_lb_count) == 0) { /* * No error but also nothing restored, meaning the lbps array * in the device header points to invalid/non-present log * blocks. Reset the header. */ spa_history_log_internal(spa, "L2ARC rebuild", NULL, "no valid log blocks"); memset(l2dhdr, 0, dev->l2ad_dev_hdr_asize); l2arc_dev_hdr_update(dev); } else if (err == ECANCELED) { /* * In case the rebuild was canceled do not log to spa history * log as the pool may be in the process of being removed. */ zfs_dbgmsg("L2ARC rebuild aborted, restored %llu blocks", (u_longlong_t)zfs_refcount_count(&dev->l2ad_lb_count)); } else if (err != 0) { spa_history_log_internal(spa, "L2ARC rebuild", NULL, "aborted, restored %llu blocks", (u_longlong_t)zfs_refcount_count(&dev->l2ad_lb_count)); } if (lock_held) spa_config_exit(spa, SCL_L2ARC, vd); return (err); } /* * Attempts to read the device header on the provided L2ARC device and writes * it to `hdr'. On success, this function returns 0, otherwise the appropriate * error code is returned. */ static int l2arc_dev_hdr_read(l2arc_dev_t *dev) { int err; uint64_t guid; l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; const uint64_t l2dhdr_asize = dev->l2ad_dev_hdr_asize; abd_t *abd; guid = spa_guid(dev->l2ad_vdev->vdev_spa); abd = abd_get_from_buf(l2dhdr, l2dhdr_asize); err = zio_wait(zio_read_phys(NULL, dev->l2ad_vdev, VDEV_LABEL_START_SIZE, l2dhdr_asize, abd, ZIO_CHECKSUM_LABEL, NULL, NULL, ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY | ZIO_FLAG_SPECULATIVE, B_FALSE)); abd_free(abd); if (err != 0) { ARCSTAT_BUMP(arcstat_l2_rebuild_abort_dh_errors); zfs_dbgmsg("L2ARC IO error (%d) while reading device header, " "vdev guid: %llu", err, (u_longlong_t)dev->l2ad_vdev->vdev_guid); return (err); } if (l2dhdr->dh_magic == BSWAP_64(L2ARC_DEV_HDR_MAGIC)) byteswap_uint64_array(l2dhdr, sizeof (*l2dhdr)); if (l2dhdr->dh_magic != L2ARC_DEV_HDR_MAGIC || l2dhdr->dh_spa_guid != guid || l2dhdr->dh_vdev_guid != dev->l2ad_vdev->vdev_guid || l2dhdr->dh_version != L2ARC_PERSISTENT_VERSION || l2dhdr->dh_log_entries != dev->l2ad_log_entries || l2dhdr->dh_end != dev->l2ad_end || !l2arc_range_check_overlap(dev->l2ad_start, dev->l2ad_end, l2dhdr->dh_evict) || (l2dhdr->dh_trim_state != VDEV_TRIM_COMPLETE && l2arc_trim_ahead > 0)) { /* * Attempt to rebuild a device containing no actual dev hdr * or containing a header from some other pool or from another * version of persistent L2ARC. */ ARCSTAT_BUMP(arcstat_l2_rebuild_abort_unsupported); return (SET_ERROR(ENOTSUP)); } return (0); } /* * Reads L2ARC log blocks from storage and validates their contents. * * This function implements a simple fetcher to make sure that while * we're processing one buffer the L2ARC is already fetching the next * one in the chain. * * The arguments this_lp and next_lp point to the current and next log block * address in the block chain. Similarly, this_lb and next_lb hold the * l2arc_log_blk_phys_t's of the current and next L2ARC blk. * * The `this_io' and `next_io' arguments are used for block fetching. * When issuing the first blk IO during rebuild, you should pass NULL for * `this_io'. This function will then issue a sync IO to read the block and * also issue an async IO to fetch the next block in the block chain. The * fetched IO is returned in `next_io'. On subsequent calls to this * function, pass the value returned in `next_io' from the previous call * as `this_io' and a fresh `next_io' pointer to hold the next fetch IO. * Prior to the call, you should initialize your `next_io' pointer to be * NULL. If no fetch IO was issued, the pointer is left set at NULL. * * On success, this function returns 0, otherwise it returns an appropriate * error code. On error the fetching IO is aborted and cleared before * returning from this function. Therefore, if we return `success', the * caller can assume that we have taken care of cleanup of fetch IOs. */ static int l2arc_log_blk_read(l2arc_dev_t *dev, const l2arc_log_blkptr_t *this_lbp, const l2arc_log_blkptr_t *next_lbp, l2arc_log_blk_phys_t *this_lb, l2arc_log_blk_phys_t *next_lb, zio_t *this_io, zio_t **next_io) { int err = 0; zio_cksum_t cksum; abd_t *abd = NULL; uint64_t asize; ASSERT(this_lbp != NULL && next_lbp != NULL); ASSERT(this_lb != NULL && next_lb != NULL); ASSERT(next_io != NULL && *next_io == NULL); ASSERT(l2arc_log_blkptr_valid(dev, this_lbp)); /* * Check to see if we have issued the IO for this log block in a * previous run. If not, this is the first call, so issue it now. */ if (this_io == NULL) { this_io = l2arc_log_blk_fetch(dev->l2ad_vdev, this_lbp, this_lb); } /* * Peek to see if we can start issuing the next IO immediately. */ if (l2arc_log_blkptr_valid(dev, next_lbp)) { /* * Start issuing IO for the next log block early - this * should help keep the L2ARC device busy while we * decompress and restore this log block. */ *next_io = l2arc_log_blk_fetch(dev->l2ad_vdev, next_lbp, next_lb); } /* Wait for the IO to read this log block to complete */ if ((err = zio_wait(this_io)) != 0) { ARCSTAT_BUMP(arcstat_l2_rebuild_abort_io_errors); zfs_dbgmsg("L2ARC IO error (%d) while reading log block, " "offset: %llu, vdev guid: %llu", err, (u_longlong_t)this_lbp->lbp_daddr, (u_longlong_t)dev->l2ad_vdev->vdev_guid); goto cleanup; } /* * Make sure the buffer checks out. * L2BLK_GET_PSIZE returns aligned size for log blocks. */ asize = L2BLK_GET_PSIZE((this_lbp)->lbp_prop); fletcher_4_native(this_lb, asize, NULL, &cksum); if (!ZIO_CHECKSUM_EQUAL(cksum, this_lbp->lbp_cksum)) { ARCSTAT_BUMP(arcstat_l2_rebuild_abort_cksum_lb_errors); zfs_dbgmsg("L2ARC log block cksum failed, offset: %llu, " "vdev guid: %llu, l2ad_hand: %llu, l2ad_evict: %llu", (u_longlong_t)this_lbp->lbp_daddr, (u_longlong_t)dev->l2ad_vdev->vdev_guid, (u_longlong_t)dev->l2ad_hand, (u_longlong_t)dev->l2ad_evict); err = SET_ERROR(ECKSUM); goto cleanup; } /* Now we can take our time decoding this buffer */ switch (L2BLK_GET_COMPRESS((this_lbp)->lbp_prop)) { case ZIO_COMPRESS_OFF: break; case ZIO_COMPRESS_LZ4: abd = abd_alloc_for_io(asize, B_TRUE); abd_copy_from_buf_off(abd, this_lb, 0, asize); if ((err = zio_decompress_data( L2BLK_GET_COMPRESS((this_lbp)->lbp_prop), abd, this_lb, asize, sizeof (*this_lb), NULL)) != 0) { err = SET_ERROR(EINVAL); goto cleanup; } break; default: err = SET_ERROR(EINVAL); goto cleanup; } if (this_lb->lb_magic == BSWAP_64(L2ARC_LOG_BLK_MAGIC)) byteswap_uint64_array(this_lb, sizeof (*this_lb)); if (this_lb->lb_magic != L2ARC_LOG_BLK_MAGIC) { err = SET_ERROR(EINVAL); goto cleanup; } cleanup: /* Abort an in-flight fetch I/O in case of error */ if (err != 0 && *next_io != NULL) { l2arc_log_blk_fetch_abort(*next_io); *next_io = NULL; } if (abd != NULL) abd_free(abd); return (err); } /* * Restores the payload of a log block to ARC. This creates empty ARC hdr * entries which only contain an l2arc hdr, essentially restoring the * buffers to their L2ARC evicted state. This function also updates space * usage on the L2ARC vdev to make sure it tracks restored buffers. */ static void l2arc_log_blk_restore(l2arc_dev_t *dev, const l2arc_log_blk_phys_t *lb, uint64_t lb_asize) { uint64_t size = 0, asize = 0; uint64_t log_entries = dev->l2ad_log_entries; /* * Usually arc_adapt() is called only for data, not headers, but * since we may allocate significant amount of memory here, let ARC * grow its arc_c. */ arc_adapt(log_entries * HDR_L2ONLY_SIZE); for (int i = log_entries - 1; i >= 0; i--) { /* * Restore goes in the reverse temporal direction to preserve * correct temporal ordering of buffers in the l2ad_buflist. * l2arc_hdr_restore also does a list_insert_tail instead of * list_insert_head on the l2ad_buflist: * * LIST l2ad_buflist LIST * HEAD <------ (time) ------ TAIL * direction +-----+-----+-----+-----+-----+ direction * of l2arc <== | buf | buf | buf | buf | buf | ===> of rebuild * fill +-----+-----+-----+-----+-----+ * ^ ^ * | | * | | * l2arc_feed_thread l2arc_rebuild * will place new bufs here restores bufs here * * During l2arc_rebuild() the device is not used by * l2arc_feed_thread() as dev->l2ad_rebuild is set to true. */ size += L2BLK_GET_LSIZE((&lb->lb_entries[i])->le_prop); asize += vdev_psize_to_asize(dev->l2ad_vdev, L2BLK_GET_PSIZE((&lb->lb_entries[i])->le_prop)); l2arc_hdr_restore(&lb->lb_entries[i], dev); } /* * Record rebuild stats: * size Logical size of restored buffers in the L2ARC * asize Aligned size of restored buffers in the L2ARC */ ARCSTAT_INCR(arcstat_l2_rebuild_size, size); ARCSTAT_INCR(arcstat_l2_rebuild_asize, asize); ARCSTAT_INCR(arcstat_l2_rebuild_bufs, log_entries); ARCSTAT_F_AVG(arcstat_l2_log_blk_avg_asize, lb_asize); ARCSTAT_F_AVG(arcstat_l2_data_to_meta_ratio, asize / lb_asize); ARCSTAT_BUMP(arcstat_l2_rebuild_log_blks); } /* * Restores a single ARC buf hdr from a log entry. The ARC buffer is put * into a state indicating that it has been evicted to L2ARC. */ static void l2arc_hdr_restore(const l2arc_log_ent_phys_t *le, l2arc_dev_t *dev) { arc_buf_hdr_t *hdr, *exists; kmutex_t *hash_lock; arc_buf_contents_t type = L2BLK_GET_TYPE((le)->le_prop); uint64_t asize; /* * Do all the allocation before grabbing any locks, this lets us * sleep if memory is full and we don't have to deal with failed * allocations. */ hdr = arc_buf_alloc_l2only(L2BLK_GET_LSIZE((le)->le_prop), type, dev, le->le_dva, le->le_daddr, L2BLK_GET_PSIZE((le)->le_prop), le->le_birth, L2BLK_GET_COMPRESS((le)->le_prop), le->le_complevel, L2BLK_GET_PROTECTED((le)->le_prop), L2BLK_GET_PREFETCH((le)->le_prop), L2BLK_GET_STATE((le)->le_prop)); asize = vdev_psize_to_asize(dev->l2ad_vdev, L2BLK_GET_PSIZE((le)->le_prop)); /* * vdev_space_update() has to be called before arc_hdr_destroy() to * avoid underflow since the latter also calls vdev_space_update(). */ l2arc_hdr_arcstats_increment(hdr); vdev_space_update(dev->l2ad_vdev, asize, 0, 0); mutex_enter(&dev->l2ad_mtx); list_insert_tail(&dev->l2ad_buflist, hdr); (void) zfs_refcount_add_many(&dev->l2ad_alloc, arc_hdr_size(hdr), hdr); mutex_exit(&dev->l2ad_mtx); exists = buf_hash_insert(hdr, &hash_lock); if (exists) { /* Buffer was already cached, no need to restore it. */ arc_hdr_destroy(hdr); /* * If the buffer is already cached, check whether it has * L2ARC metadata. If not, enter them and update the flag. * This is important is case of onlining a cache device, since * we previously evicted all L2ARC metadata from ARC. */ if (!HDR_HAS_L2HDR(exists)) { arc_hdr_set_flags(exists, ARC_FLAG_HAS_L2HDR); exists->b_l2hdr.b_dev = dev; exists->b_l2hdr.b_daddr = le->le_daddr; exists->b_l2hdr.b_arcs_state = L2BLK_GET_STATE((le)->le_prop); mutex_enter(&dev->l2ad_mtx); list_insert_tail(&dev->l2ad_buflist, exists); (void) zfs_refcount_add_many(&dev->l2ad_alloc, arc_hdr_size(exists), exists); mutex_exit(&dev->l2ad_mtx); l2arc_hdr_arcstats_increment(exists); vdev_space_update(dev->l2ad_vdev, asize, 0, 0); } ARCSTAT_BUMP(arcstat_l2_rebuild_bufs_precached); } mutex_exit(hash_lock); } /* * Starts an asynchronous read IO to read a log block. This is used in log * block reconstruction to start reading the next block before we are done * decoding and reconstructing the current block, to keep the l2arc device * nice and hot with read IO to process. * The returned zio will contain a newly allocated memory buffers for the IO * data which should then be freed by the caller once the zio is no longer * needed (i.e. due to it having completed). If you wish to abort this * zio, you should do so using l2arc_log_blk_fetch_abort, which takes * care of disposing of the allocated buffers correctly. */ static zio_t * l2arc_log_blk_fetch(vdev_t *vd, const l2arc_log_blkptr_t *lbp, l2arc_log_blk_phys_t *lb) { uint32_t asize; zio_t *pio; l2arc_read_callback_t *cb; /* L2BLK_GET_PSIZE returns aligned size for log blocks */ asize = L2BLK_GET_PSIZE((lbp)->lbp_prop); ASSERT(asize <= sizeof (l2arc_log_blk_phys_t)); cb = kmem_zalloc(sizeof (l2arc_read_callback_t), KM_SLEEP); cb->l2rcb_abd = abd_get_from_buf(lb, asize); pio = zio_root(vd->vdev_spa, l2arc_blk_fetch_done, cb, ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY); (void) zio_nowait(zio_read_phys(pio, vd, lbp->lbp_daddr, asize, cb->l2rcb_abd, ZIO_CHECKSUM_OFF, NULL, NULL, ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY, B_FALSE)); return (pio); } /* * Aborts a zio returned from l2arc_log_blk_fetch and frees the data * buffers allocated for it. */ static void l2arc_log_blk_fetch_abort(zio_t *zio) { (void) zio_wait(zio); } /* * Creates a zio to update the device header on an l2arc device. */ void l2arc_dev_hdr_update(l2arc_dev_t *dev) { l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; const uint64_t l2dhdr_asize = dev->l2ad_dev_hdr_asize; abd_t *abd; int err; VERIFY(spa_config_held(dev->l2ad_spa, SCL_STATE_ALL, RW_READER)); l2dhdr->dh_magic = L2ARC_DEV_HDR_MAGIC; l2dhdr->dh_version = L2ARC_PERSISTENT_VERSION; l2dhdr->dh_spa_guid = spa_guid(dev->l2ad_vdev->vdev_spa); l2dhdr->dh_vdev_guid = dev->l2ad_vdev->vdev_guid; l2dhdr->dh_log_entries = dev->l2ad_log_entries; l2dhdr->dh_evict = dev->l2ad_evict; l2dhdr->dh_start = dev->l2ad_start; l2dhdr->dh_end = dev->l2ad_end; l2dhdr->dh_lb_asize = zfs_refcount_count(&dev->l2ad_lb_asize); l2dhdr->dh_lb_count = zfs_refcount_count(&dev->l2ad_lb_count); l2dhdr->dh_flags = 0; l2dhdr->dh_trim_action_time = dev->l2ad_vdev->vdev_trim_action_time; l2dhdr->dh_trim_state = dev->l2ad_vdev->vdev_trim_state; if (dev->l2ad_first) l2dhdr->dh_flags |= L2ARC_DEV_HDR_EVICT_FIRST; abd = abd_get_from_buf(l2dhdr, l2dhdr_asize); err = zio_wait(zio_write_phys(NULL, dev->l2ad_vdev, VDEV_LABEL_START_SIZE, l2dhdr_asize, abd, ZIO_CHECKSUM_LABEL, NULL, NULL, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_CANFAIL, B_FALSE)); abd_free(abd); if (err != 0) { zfs_dbgmsg("L2ARC IO error (%d) while writing device header, " "vdev guid: %llu", err, (u_longlong_t)dev->l2ad_vdev->vdev_guid); } } /* * Commits a log block to the L2ARC device. This routine is invoked from * l2arc_write_buffers when the log block fills up. * This function allocates some memory to temporarily hold the serialized * buffer to be written. This is then released in l2arc_write_done. */ static uint64_t l2arc_log_blk_commit(l2arc_dev_t *dev, zio_t *pio, l2arc_write_callback_t *cb) { l2arc_log_blk_phys_t *lb = &dev->l2ad_log_blk; l2arc_dev_hdr_phys_t *l2dhdr = dev->l2ad_dev_hdr; uint64_t psize, asize; zio_t *wzio; l2arc_lb_abd_buf_t *abd_buf; uint8_t *tmpbuf = NULL; l2arc_lb_ptr_buf_t *lb_ptr_buf; VERIFY3S(dev->l2ad_log_ent_idx, ==, dev->l2ad_log_entries); abd_buf = zio_buf_alloc(sizeof (*abd_buf)); abd_buf->abd = abd_get_from_buf(lb, sizeof (*lb)); lb_ptr_buf = kmem_zalloc(sizeof (l2arc_lb_ptr_buf_t), KM_SLEEP); lb_ptr_buf->lb_ptr = kmem_zalloc(sizeof (l2arc_log_blkptr_t), KM_SLEEP); /* link the buffer into the block chain */ lb->lb_prev_lbp = l2dhdr->dh_start_lbps[1]; lb->lb_magic = L2ARC_LOG_BLK_MAGIC; /* * l2arc_log_blk_commit() may be called multiple times during a single * l2arc_write_buffers() call. Save the allocated abd buffers in a list * so we can free them in l2arc_write_done() later on. */ list_insert_tail(&cb->l2wcb_abd_list, abd_buf); /* try to compress the buffer */ psize = zio_compress_data(ZIO_COMPRESS_LZ4, abd_buf->abd, (void **) &tmpbuf, sizeof (*lb), 0); /* a log block is never entirely zero */ ASSERT(psize != 0); asize = vdev_psize_to_asize(dev->l2ad_vdev, psize); ASSERT(asize <= sizeof (*lb)); /* * Update the start log block pointer in the device header to point * to the log block we're about to write. */ l2dhdr->dh_start_lbps[1] = l2dhdr->dh_start_lbps[0]; l2dhdr->dh_start_lbps[0].lbp_daddr = dev->l2ad_hand; l2dhdr->dh_start_lbps[0].lbp_payload_asize = dev->l2ad_log_blk_payload_asize; l2dhdr->dh_start_lbps[0].lbp_payload_start = dev->l2ad_log_blk_payload_start; L2BLK_SET_LSIZE( (&l2dhdr->dh_start_lbps[0])->lbp_prop, sizeof (*lb)); L2BLK_SET_PSIZE( (&l2dhdr->dh_start_lbps[0])->lbp_prop, asize); L2BLK_SET_CHECKSUM( (&l2dhdr->dh_start_lbps[0])->lbp_prop, ZIO_CHECKSUM_FLETCHER_4); if (asize < sizeof (*lb)) { /* compression succeeded */ memset(tmpbuf + psize, 0, asize - psize); L2BLK_SET_COMPRESS( (&l2dhdr->dh_start_lbps[0])->lbp_prop, ZIO_COMPRESS_LZ4); } else { /* compression failed */ memcpy(tmpbuf, lb, sizeof (*lb)); L2BLK_SET_COMPRESS( (&l2dhdr->dh_start_lbps[0])->lbp_prop, ZIO_COMPRESS_OFF); } /* checksum what we're about to write */ fletcher_4_native(tmpbuf, asize, NULL, &l2dhdr->dh_start_lbps[0].lbp_cksum); abd_free(abd_buf->abd); /* perform the write itself */ abd_buf->abd = abd_get_from_buf(tmpbuf, sizeof (*lb)); abd_take_ownership_of_buf(abd_buf->abd, B_TRUE); wzio = zio_write_phys(pio, dev->l2ad_vdev, dev->l2ad_hand, asize, abd_buf->abd, ZIO_CHECKSUM_OFF, NULL, NULL, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_CANFAIL, B_FALSE); DTRACE_PROBE2(l2arc__write, vdev_t *, dev->l2ad_vdev, zio_t *, wzio); (void) zio_nowait(wzio); dev->l2ad_hand += asize; /* * Include the committed log block's pointer in the list of pointers * to log blocks present in the L2ARC device. */ memcpy(lb_ptr_buf->lb_ptr, &l2dhdr->dh_start_lbps[0], sizeof (l2arc_log_blkptr_t)); mutex_enter(&dev->l2ad_mtx); list_insert_head(&dev->l2ad_lbptr_list, lb_ptr_buf); ARCSTAT_INCR(arcstat_l2_log_blk_asize, asize); ARCSTAT_BUMP(arcstat_l2_log_blk_count); zfs_refcount_add_many(&dev->l2ad_lb_asize, asize, lb_ptr_buf); zfs_refcount_add(&dev->l2ad_lb_count, lb_ptr_buf); mutex_exit(&dev->l2ad_mtx); vdev_space_update(dev->l2ad_vdev, asize, 0, 0); /* bump the kstats */ ARCSTAT_INCR(arcstat_l2_write_bytes, asize); ARCSTAT_BUMP(arcstat_l2_log_blk_writes); ARCSTAT_F_AVG(arcstat_l2_log_blk_avg_asize, asize); ARCSTAT_F_AVG(arcstat_l2_data_to_meta_ratio, dev->l2ad_log_blk_payload_asize / asize); /* start a new log block */ dev->l2ad_log_ent_idx = 0; dev->l2ad_log_blk_payload_asize = 0; dev->l2ad_log_blk_payload_start = 0; return (asize); } /* * Validates an L2ARC log block address to make sure that it can be read * from the provided L2ARC device. */ boolean_t l2arc_log_blkptr_valid(l2arc_dev_t *dev, const l2arc_log_blkptr_t *lbp) { /* L2BLK_GET_PSIZE returns aligned size for log blocks */ uint64_t asize = L2BLK_GET_PSIZE((lbp)->lbp_prop); uint64_t end = lbp->lbp_daddr + asize - 1; uint64_t start = lbp->lbp_payload_start; boolean_t evicted = B_FALSE; /* * A log block is valid if all of the following conditions are true: * - it fits entirely (including its payload) between l2ad_start and * l2ad_end * - it has a valid size * - neither the log block itself nor part of its payload was evicted * by l2arc_evict(): * * l2ad_hand l2ad_evict * | | lbp_daddr * | start | | end * | | | | | * V V V V V * l2ad_start ============================================ l2ad_end * --------------------------|||| * ^ ^ * | log block * payload */ evicted = l2arc_range_check_overlap(start, end, dev->l2ad_hand) || l2arc_range_check_overlap(start, end, dev->l2ad_evict) || l2arc_range_check_overlap(dev->l2ad_hand, dev->l2ad_evict, start) || l2arc_range_check_overlap(dev->l2ad_hand, dev->l2ad_evict, end); return (start >= dev->l2ad_start && end <= dev->l2ad_end && asize > 0 && asize <= sizeof (l2arc_log_blk_phys_t) && (!evicted || dev->l2ad_first)); } /* * Inserts ARC buffer header `hdr' into the current L2ARC log block on * the device. The buffer being inserted must be present in L2ARC. * Returns B_TRUE if the L2ARC log block is full and needs to be committed * to L2ARC, or B_FALSE if it still has room for more ARC buffers. */ static boolean_t l2arc_log_blk_insert(l2arc_dev_t *dev, const arc_buf_hdr_t *hdr) { l2arc_log_blk_phys_t *lb = &dev->l2ad_log_blk; l2arc_log_ent_phys_t *le; if (dev->l2ad_log_entries == 0) return (B_FALSE); int index = dev->l2ad_log_ent_idx++; ASSERT3S(index, <, dev->l2ad_log_entries); ASSERT(HDR_HAS_L2HDR(hdr)); le = &lb->lb_entries[index]; memset(le, 0, sizeof (*le)); le->le_dva = hdr->b_dva; le->le_birth = hdr->b_birth; le->le_daddr = hdr->b_l2hdr.b_daddr; if (index == 0) dev->l2ad_log_blk_payload_start = le->le_daddr; L2BLK_SET_LSIZE((le)->le_prop, HDR_GET_LSIZE(hdr)); L2BLK_SET_PSIZE((le)->le_prop, HDR_GET_PSIZE(hdr)); L2BLK_SET_COMPRESS((le)->le_prop, HDR_GET_COMPRESS(hdr)); le->le_complevel = hdr->b_complevel; L2BLK_SET_TYPE((le)->le_prop, hdr->b_type); L2BLK_SET_PROTECTED((le)->le_prop, !!(HDR_PROTECTED(hdr))); L2BLK_SET_PREFETCH((le)->le_prop, !!(HDR_PREFETCH(hdr))); L2BLK_SET_STATE((le)->le_prop, hdr->b_l2hdr.b_arcs_state); dev->l2ad_log_blk_payload_asize += vdev_psize_to_asize(dev->l2ad_vdev, HDR_GET_PSIZE(hdr)); return (dev->l2ad_log_ent_idx == dev->l2ad_log_entries); } /* * Checks whether a given L2ARC device address sits in a time-sequential * range. The trick here is that the L2ARC is a rotary buffer, so we can't * just do a range comparison, we need to handle the situation in which the * range wraps around the end of the L2ARC device. Arguments: * bottom -- Lower end of the range to check (written to earlier). * top -- Upper end of the range to check (written to later). * check -- The address for which we want to determine if it sits in * between the top and bottom. * * The 3-way conditional below represents the following cases: * * bottom < top : Sequentially ordered case: * --------+-------------------+ * | (overlap here?) | * L2ARC dev V V * |---------------============--------------| * * bottom > top: Looped-around case: * --------+------------------+ * | (overlap here?) | * L2ARC dev V V * |===============---------------===========| * ^ ^ * | (or here?) | * +---------------+--------- * * top == bottom : Just a single address comparison. */ boolean_t l2arc_range_check_overlap(uint64_t bottom, uint64_t top, uint64_t check) { if (bottom < top) return (bottom <= check && check <= top); else if (bottom > top) return (check <= top || bottom <= check); else return (check == top); } EXPORT_SYMBOL(arc_buf_size); EXPORT_SYMBOL(arc_write); EXPORT_SYMBOL(arc_read); EXPORT_SYMBOL(arc_buf_info); EXPORT_SYMBOL(arc_getbuf_func); EXPORT_SYMBOL(arc_add_prune_callback); EXPORT_SYMBOL(arc_remove_prune_callback); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, min, param_set_arc_min, spl_param_get_u64, ZMOD_RW, "Minimum ARC size in bytes"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, max, param_set_arc_max, spl_param_get_u64, ZMOD_RW, "Maximum ARC size in bytes"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, meta_balance, UINT, ZMOD_RW, "Balance between metadata and data on ghost hits."); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, grow_retry, param_set_arc_int, param_get_uint, ZMOD_RW, "Seconds before growing ARC size"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, shrink_shift, param_set_arc_int, param_get_uint, ZMOD_RW, "log2(fraction of ARC to reclaim)"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, pc_percent, UINT, ZMOD_RW, "Percent of pagecache to reclaim ARC to"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, average_blocksize, UINT, ZMOD_RD, "Target average block size"); ZFS_MODULE_PARAM(zfs, zfs_, compressed_arc_enabled, INT, ZMOD_RW, "Disable compressed ARC buffers"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, min_prefetch_ms, param_set_arc_int, param_get_uint, ZMOD_RW, "Min life of prefetch block in ms"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, min_prescient_prefetch_ms, param_set_arc_int, param_get_uint, ZMOD_RW, "Min life of prescient prefetched block in ms"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, write_max, U64, ZMOD_RW, "Max write bytes per interval"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, write_boost, U64, ZMOD_RW, "Extra write bytes during device warmup"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, headroom, U64, ZMOD_RW, "Number of max device writes to precache"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, headroom_boost, U64, ZMOD_RW, "Compressed l2arc_headroom multiplier"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, trim_ahead, U64, ZMOD_RW, "TRIM ahead L2ARC write size multiplier"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, feed_secs, U64, ZMOD_RW, "Seconds between L2ARC writing"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, feed_min_ms, U64, ZMOD_RW, "Min feed interval in milliseconds"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, noprefetch, INT, ZMOD_RW, "Skip caching prefetched buffers"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, feed_again, INT, ZMOD_RW, "Turbo L2ARC warmup"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, norw, INT, ZMOD_RW, "No reads during writes"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, meta_percent, UINT, ZMOD_RW, "Percent of ARC size allowed for L2ARC-only headers"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, rebuild_enabled, INT, ZMOD_RW, "Rebuild the L2ARC when importing a pool"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, rebuild_blocks_min_l2size, U64, ZMOD_RW, "Min size in bytes to write rebuild log blocks in L2ARC"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, mfuonly, INT, ZMOD_RW, "Cache only MFU data from ARC into L2ARC"); ZFS_MODULE_PARAM(zfs_l2arc, l2arc_, exclude_special, INT, ZMOD_RW, "Exclude dbufs on special vdevs from being cached to L2ARC if set."); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, lotsfree_percent, param_set_arc_int, param_get_uint, ZMOD_RW, "System free memory I/O throttle in bytes"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, sys_free, param_set_arc_u64, spl_param_get_u64, ZMOD_RW, "System free memory target size in bytes"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, dnode_limit, param_set_arc_u64, spl_param_get_u64, ZMOD_RW, "Minimum bytes of dnodes in ARC"); ZFS_MODULE_PARAM_CALL(zfs_arc, zfs_arc_, dnode_limit_percent, param_set_arc_int, param_get_uint, ZMOD_RW, "Percent of ARC meta buffers for dnodes"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, dnode_reduce_percent, UINT, ZMOD_RW, "Percentage of excess dnodes to try to unpin"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, eviction_pct, UINT, ZMOD_RW, "When full, ARC allocation waits for eviction of this % of alloc size"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, evict_batch_limit, UINT, ZMOD_RW, "The number of headers to evict per sublist before moving to the next"); ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, prune_task_threads, INT, ZMOD_RW, "Number of arc_prune threads");