diff --git a/tests/sys/netpfil/common/dummynet.sh b/tests/sys/netpfil/common/dummynet.sh index 644b36516b5a..448bb79a46f9 100644 --- a/tests/sys/netpfil/common/dummynet.sh +++ b/tests/sys/netpfil/common/dummynet.sh @@ -1,344 +1,390 @@ # $FreeBSD$ # # SPDX-License-Identifier: BSD-2-Clause-FreeBSD # # Copyright (c) 2021 Rubicon Communications, LLC (Netgate) # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. . $(atf_get_srcdir)/utils.subr . $(atf_get_srcdir)/runner.subr pipe_head() { atf_set descr 'Basic pipe test' atf_set require.user root } pipe_body() { fw=$1 firewall_init $fw dummynet_init $fw epair=$(vnet_mkepair) vnet_mkjail alcatraz ${epair}b ifconfig ${epair}a 192.0.2.1/24 up jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up # Sanity check atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2 jexec alcatraz dnctl pipe 1 config bw 30Byte/s firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1000 pipe 1 ip from any to any" \ "pf" \ "pass dnpipe 1" # single ping succeeds just fine atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2 # Saturate the link ping -i .1 -c 5 -s 1200 192.0.2.2 # We should now be hitting the limits and get this packet dropped. atf_check -s exit:2 -o ignore ping -c 1 -s 1200 192.0.2.2 } pipe_cleanup() { firewall_cleanup $1 } pipe_v6_head() { atf_set descr 'Basic IPv6 pipe test' atf_set require.user root } pipe_v6_body() { fw=$1 firewall_init $fw dummynet_init $fw epair=$(vnet_mkepair) vnet_mkjail alcatraz ${epair}b ifconfig ${epair}a inet6 2001:db8:42::1/64 up no_dad jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2/64 up no_dad # Sanity check atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2 jexec alcatraz dnctl pipe 1 config bw 100Byte/s firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1000 pipe 1 ip6 from any to any" \ "pf" \ "pass dnpipe 1" # Single ping succeeds atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2 # Saturate the link ping6 -i .1 -c 5 -s 1200 2001:db8:42::2 # We should now be hitting the limit and get this packet dropped. atf_check -s exit:2 -o ignore ping6 -c 1 -s 1200 2001:db8:42::2 } pipe_v6_cleanup() { firewall_cleanup $1 } queue_head() { atf_set descr 'Basic queue test' atf_set require.user root } queue_body() { fw=$1 firewall_init $fw dummynet_init $fw epair=$(vnet_mkepair) vnet_mkjail alcatraz ${epair}b ifconfig ${epair}a 192.0.2.1/24 up jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \ $(atf_get_srcdir)/../pf/echo_inetd.conf # Sanity check atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2 reply=$(echo "foo" | nc -N 192.0.2.2 7) if [ "$reply" != "foo" ]; then atf_fail "Echo sanity check failed" fi jexec alcatraz dnctl pipe 1 config bw 1MByte/s jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+ jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1000 queue 100 tcp from 192.0.2.2 to any out" \ "ipfw add 1001 queue 200 icmp from 192.0.2.2 to any out" \ "ipfw add 1002 allow ip from any to any" \ "pf" \ "pass in proto tcp dnqueue (0, 100)" \ "pass in proto icmp dnqueue (0, 200)" # Single ping succeeds atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2 # Unsaturated TCP succeeds reply=$(echo "foo" | nc -w 5 -N 192.0.2.2 7) if [ "$reply" != "foo" ]; then atf_fail "Unsaturated echo failed" fi # Saturate the link ping -f -s 1300 192.0.2.2 & # Allow this to fill the queue sleep 1 # TCP should still just pass fails=0 for i in `seq 1 3` do result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c) if [ $result -ne 2048000 ]; then echo "Failed to prioritise TCP traffic. Got only $result bytes" fails=$(( ${fails} + 1 )) fi done if [ ${fails} -gt 0 ]; then atf_fail "We failed prioritisation ${fails} times" fi # This will fail if we reverse the pola^W priority firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1000 queue 200 tcp from 192.0.2.2 to any out" \ "ipfw add 1001 queue 100 icmp from 192.0.2.2 to any out" \ "ipfw add 1002 allow ip from any to any" \ "pf" \ "pass in proto tcp dnqueue (0, 200)" \ "pass in proto icmp dnqueue (0, 100)" jexec alcatraz ping -f -s 1300 192.0.2.1 & sleep 1 fails=0 for i in `seq 1 3` do result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c) if [ $result -ne 2048000 ]; then echo "Failed to prioritise TCP traffic. Got only $result bytes" fails=$(( ${fails} + 1 )) fi done if [ ${fails} -lt 3 ]; then atf_fail "We failed reversed prioritisation only ${fails} times." fi } queue_cleanup() { firewall_cleanup $1 } queue_v6_head() { atf_set descr 'Basic queue test' atf_set require.user root } queue_v6_body() { fw=$1 firewall_init $fw dummynet_init $fw epair=$(vnet_mkepair) vnet_mkjail alcatraz ${epair}b ifconfig ${epair}a inet6 2001:db8:42::1/64 no_dad up jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2 no_dad up jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \ $(atf_get_srcdir)/../pf/echo_inetd.conf # Sanity check atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2 reply=$(echo "foo" | nc -N 2001:db8:42::2 7) if [ "$reply" != "foo" ]; then atf_fail "Echo sanity check failed" fi jexec alcatraz dnctl pipe 1 config bw 1MByte/s jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+ jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1001 queue 100 tcp from 2001:db8:42::2 to any out" \ "ipfw add 1000 queue 200 ipv6-icmp from 2001:db8:42::2 to any out" \ "ipfw add 1002 allow ip6 from any to any" \ "pf" \ "pass in proto tcp dnqueue (0, 100)" \ "pass in proto icmp6 dnqueue (0, 200)" # Single ping succeeds atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2 # Unsaturated TCP succeeds reply=$(echo "foo" | nc -w 5 -N 2001:db8:42::2 7) if [ "$reply" != "foo" ]; then atf_fail "Unsaturated echo failed" fi # Saturate the link ping6 -f -s 1200 2001:db8:42::2 & # Allow this to fill the queue sleep 1 # TCP should still just pass fails=0 for i in `seq 1 3` do result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c) if [ $result -ne 1024000 ]; then echo "Failed to prioritise TCP traffic. Got only $result bytes" fails=$(( ${fails} + 1 )) fi done if [ ${fails} -gt 0 ]; then atf_fail "We failed prioritisation ${fails} times" fi # What happens if we prioritise ICMP over TCP? firewall_config alcatraz ${fw} \ "ipfw" \ "ipfw add 1001 queue 200 tcp from 2001:db8:42::2 to any out" \ "ipfw add 1000 queue 100 ipv6-icmp from 2001:db8:42::2 to any out" \ "ipfw add 1002 allow ip6 from any to any" \ "pf" \ "pass in proto tcp dnqueue (0, 200)" \ "pass in proto icmp6 dnqueue (0, 100)" fails=0 for i in `seq 1 3` do result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c) if [ $result -ne 1024000 ]; then echo "Failed to prioritise TCP traffic. Got only $result bytes" fails=$(( ${fails} + 1 )) fi done if [ ${fails} -lt 3 ]; then atf_fail "We failed reversed prioritisation only ${fails} times." fi } queue_v6_cleanup() { firewall_cleanup $1 } +nat_head() +{ + atf_set descr 'Basic dummynet + NAT test' + atf_set require.user root +} + +nat_body() +{ + fw=$1 + firewall_init $fw + dummynet_init $fw + nat_init $fw + + epair=$(vnet_mkepair) + epair_two=$(vnet_mkepair) + + ifconfig ${epair}a 192.0.2.2/24 up + route add -net 198.51.100.0/24 192.0.2.1 + + vnet_mkjail gw ${epair}b ${epair_two}a + jexec gw ifconfig ${epair}b 192.0.2.1/24 up + jexec gw ifconfig ${epair_two}a 198.51.100.1/24 up + jexec gw sysctl net.inet.ip.forwarding=1 + + vnet_mkjail srv ${epair_two}b + jexec srv ifconfig ${epair_two}b 198.51.100.2/24 up + + jexec gw dnctl pipe 1 config bw 300Byte/s + + firewall_config gw $fw \ + "pf" \ + "nat on ${epair_two}a inet from 192.0.2.0/24 to any -> (${epair_two}a)" \ + "pass dnpipe 1" + + # We've deliberately not set a route to 192.0.2.0/24 on srv, so the + # only way it can respond to this is if NAT is applied correctly. + atf_check -s exit:0 -o ignore ping -c 1 198.51.100.2 +} + +nat_cleanup() +{ + firewall_cleanup $1 +} + setup_tests \ pipe \ ipfw \ pf \ pipe_v6 \ ipfw \ pf \ queue \ ipfw \ pf \ queue_v6 \ ipfw \ + pf \ + nat \ pf