diff --git a/sys/amd64/conf/NOTES b/sys/amd64/conf/NOTES index 42cc23d076b9..0781d03900ca 100644 --- a/sys/amd64/conf/NOTES +++ b/sys/amd64/conf/NOTES @@ -1,664 +1,667 @@ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # This file contains machine dependent kernel configuration notes. For # machine independent notes, look in /sys/conf/NOTES. # # $FreeBSD$ # # # Enable the kernel DTrace hooks which are required to load the DTrace # kernel modules. # options KDTRACE_HOOKS # DTrace core # NOTE: introduces CDDL-licensed components into the kernel #device dtrace # DTrace modules #device dtrace_profile #device dtrace_sdt #device dtrace_fbt #device dtrace_systrace #device dtrace_prototype #device dtnfscl #device dtmalloc # Alternatively include all the DTrace modules #device dtraceall ##################################################################### # SMP OPTIONS: # # Notes: # # IPI_PREEMPTION instructs the kernel to preempt threads running on other # CPUS if needed. Relies on the PREEMPTION option # Optional: options IPI_PREEMPTION device atpic # Optional legacy pic support device mptable # Optional MPSPEC mptable support # Debugging options. # options COUNT_XINVLTLB_HITS # Counters for TLB events options COUNT_IPIS # Per-CPU IPI interrupt counters ##################################################################### # CPU OPTIONS # # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # cpu HAMMER # aka K8, aka Opteron & Athlon64 # # Options for CPU features. # ##################################################################### # NETWORKING OPTIONS # # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with help of # the ifconfig(8) utility, and select the CPU fraction reserved to # userland with the sysctl variable kern.polling.user_frac # (default 50, range 0..100). # # Not all device drivers support this mode of operation at the time of # this writing. See polling(4) for more details. options DEVICE_POLLING # BPF_JITTER adds support for BPF just-in-time compiler. options BPF_JITTER # OpenFabrics Enterprise Distribution (Infiniband). options OFED options OFED_DEBUG_INIT # Sockets Direct Protocol options SDP options SDP_DEBUG # IP over Infiniband options IPOIB options IPOIB_DEBUG options IPOIB_CM ##################################################################### # CLOCK OPTIONS # Provide read/write access to the memory in the clock chip. device nvram # Access to rtc cmos via /dev/nvram ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device speaker #Play IBM BASIC-style noises out your speaker envvar hint.speaker.0.at="isa" envvar hint.speaker.0.port="0x61" ##################################################################### # HARDWARE BUS CONFIGURATION # # ISA bus # device isa # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe # fails to detect >64MB RAM you will have to use the MAXMEM option. # The amount is in kilobytes, so for a machine with 128MB of RAM, it would # be 131072 (128 * 1024). # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. options AUTO_EOI_1 #options AUTO_EOI_2 options MAXMEM=(128*1024) #options BROKEN_KEYBOARD_RESET # # AGP GART support device agp # # AGP debugging. # options AGP_DEBUG ##################################################################### # HARDWARE DEVICE CONFIGURATION # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG device dpms # DPMS suspend & resume via VESA BIOS # x86 real mode BIOS emulator, required by atkbdc/dpms/vesa options X86BIOS # # Optional devices: # # PS/2 mouse device psm envvar hint.psm.0.at="atkbdc" envvar hint.psm.0.irq="12" # Options for psm: options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event # The keyboard controller; it controls the keyboard and the PS/2 mouse. device atkbdc envvar hint.atkbdc.0.at="isa" envvar hint.atkbdc.0.port="0x060" # The AT keyboard device atkbd envvar hint.atkbd.0.at="atkbdc" envvar hint.atkbd.0.irq="1" # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # Video card driver for VGA adapters. device vga envvar hint.vga.0.at="isa" # Options for vga: # Try the following option if the mouse pointer is not drawn correctly # or font does not seem to be loaded properly. May cause flicker on # some systems. options VGA_ALT_SEQACCESS # If you can dispense with some vga driver features, you may want to # use the following options to save some memory. #options VGA_NO_FONT_LOADING # don't save/load font #options VGA_NO_MODE_CHANGE # don't change video modes # Older video cards may require this option for proper operation. options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # Debugging. options VGA_DEBUG # vt(4) drivers. device vt_vga # VGA device vt_efifb # EFI framebuffer device vt_vbefb # VBE framebuffer # Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA. device s3pci # 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create # the /dev/3dfx0 device to work with glide implementations. This should get # linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as # the tdfx DRI module from XFree86 and is completely unrelated. # device tdfx # Enable 3Dfx Voodoo support # # ACPI support using the Intel ACPI Component Architecture reference # implementation. # # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer # kernel environment variables to select initial debugging levels for the # Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER # defined when it is built). device acpi options ACPI_DEBUG # The cpufreq(4) driver provides support for non-ACPI CPU frequency control device cpufreq # # Network interfaces: # # axp: AMD EPYC integrated NIC # Requires the miibus module # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # ice: Intel 800 Series Physical Function # Requires the ice_ddp module for full functionality # igc: Intel I225 2.5Gb Ethernet adapter # ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter # Requires the ipw firmware module # irdma: Intel 800 Series RDMA driver # Requires the ice module # iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters # Requires the iwi firmware module # iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn # 802.11 network adapters # Requires the iwn firmware module # mthca: Mellanox HCA InfiniBand # mlx4ib: Mellanox ConnectX HCA InfiniBand # mlx4en: Mellanox ConnectX HCA Ethernet # nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source) # qlxgb: QLogic 3200 and 8200 series 10 Gigabit Ethernet & CNA Adapter # qlxgbe: QLogic 8300 series 10 Gigabit Ethernet & CNA Adapter # qlxge: QLogic 8100 series 10 Gigabit Ethernet & CNA Adapter # sfxge: Solarflare SFC9000 family 10Gb Ethernet adapters # vmx: VMware VMXNET3 Ethernet (BSD open source) # wpi: Intel 3945ABG Wireless LAN controller # Requires the wpi firmware module device axp # AMD EPYC integrated NIC device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device igc # Intel I225 2.5G Ethernet device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device ixl # Intel 700 Series Physical Function device iavf # Intel Adaptive Virtual Function device ice # Intel 800 Series Physical Function device ice_ddp # Intel 800 Series DDP Package device irdma # Intel 800 Series RDMA driver device mthca # Mellanox HCA InfiniBand device mlx4 # Shared code module between IB and Ethernet device mlx4ib # Mellanox ConnectX HCA InfiniBand device mlx4en # Mellanox ConnectX HCA Ethernet device nfe # nVidia nForce MCP on-board Ethernet device qlxgb # QLogic 3200/8200 Ethernet device qlxgbe # QLogic 8300 Ethernet device qlxge # QLogic 8100 Ethernet device sfxge # Solarflare SFC9000 10Gb Ethernet device vmx # VMware VMXNET3 Ethernet device wpi # Intel 3945ABG wireless NICs. # IEEE 802.11 adapter firmware modules # Intel PRO/Wireless 2100 firmware: # ipwfw: BSS/IBSS/monitor mode firmware # ipwbssfw: BSS mode firmware # ipwibssfw: IBSS mode firmware # ipwmonitorfw: Monitor mode firmware # Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware: # iwifw: BSS/IBSS/monitor mode firmware # iwibssfw: BSS mode firmware # iwiibssfw: IBSS mode firmware # iwimonitorfw: Monitor mode firmware # Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware: # iwnfw: Single module to support all devices # iwn1000fw: Specific module for the 1000 only # iwn105fw: Specific module for the 105 only # iwn135fw: Specific module for the 135 only # iwn2000fw: Specific module for the 2000 only # iwn2030fw: Specific module for the 2030 only # iwn4965fw: Specific module for the 4965 only # iwn5000fw: Specific module for the 5000 only # iwn5150fw: Specific module for the 5150 only # iwn6000fw: Specific module for the 6000 only # iwn6000g2afw: Specific module for the 6000g2a only # iwn6000g2bfw: Specific module for the 6000g2b only # iwn6050fw: Specific module for the 6050 only # wpifw: Intel 3945ABG Wireless LAN Controller firmware device iwifw device iwibssfw device iwiibssfw device iwimonitorfw device ipwfw device ipwbssfw device ipwibssfw device ipwmonitorfw device iwnfw device iwn1000fw device iwn105fw device iwn135fw device iwn2000fw device iwn2030fw device iwn4965fw device iwn5000fw device iwn5150fw device iwn6000fw device iwn6000g2afw device iwn6000g2bfw device iwn6050fw device wpifw +# net80211 options +options IEEE80211_DEBUG_REFCNT + # # Non-Transparent Bridge (NTB) drivers # device if_ntb # Virtual NTB network interface device ntb_transport # NTB packet transport driver device ntb # NTB hardware interface device ntb_hw_amd # AMD NTB hardware driver device ntb_hw_intel # Intel NTB hardware driver device ntb_hw_plx # PLX NTB hardware driver # #XXX this stores pointers in a 32bit field that is defined by the hardware #device pst # # Areca 11xx and 12xx series of SATA II RAID controllers. # CAM is required. # device arcmsr # Areca SATA II RAID # # Microsemi smartpqi controllers. # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device smartpqi # # Adaptec FSA RAID controllers, including integrated DELL controllers, # the Dell PERC 2/QC and the HP NetRAID-4M device aac device aacp # SCSI Passthrough interface (optional, CAM required) # # Highpoint RocketRAID 27xx. device hpt27xx # # Highpoint RocketRAID 182x. device hptmv # # Highpoint DC7280 and R750. device hptnr # # Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340, # RR2210, RR174x, RR2522, RR231x, RR230x. device hptrr # # Highpoint RocketRaid 3xxx series SATA RAID device hptiop # # IBM (now Adaptec) ServeRAID controllers device ips # # Intel integrated Memory Controller (iMC) SMBus controller # Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon device imcsmb # # Intel C600 (Patsburg) integrated SAS controller device isci options ISCI_LOGGING # enable debugging in isci HAL # # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespaces as disks, depends on nvme # # Intel Volume Management Device (VMD) support device vmd # # PMC-Sierra SAS/SATA controller device pmspcv # # Intel QuickAssist driver with OpenCrypto support # # Only for legacy Atom C2XXX chipsets. device qat_c2xxx # # SafeNet crypto driver: can be moved to the MI NOTES as soon as # it's tested on a big-endian machine # device safe # SafeNet 1141 options SAFE_DEBUG # enable debugging support: hw.safe.debug options SAFE_RNDTEST # enable rndtest support # # VirtIO support # # The virtio entry provides a generic bus for use by the device drivers. # It must be combined with an interface that communicates with the host. # Multiple such interfaces are defined by the VirtIO specification. FreeBSD # only has support for PCI. Therefore, virtio_pci must be statically # compiled in or loaded as a module for the device drivers to function. # device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI Interface device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device device virtio_random # VirtIO Entropy device device virtio_console # VirtIO Console device # Linux KVM paravirtualization support device kvm_clock # KVM paravirtual clock driver # Microsoft Hyper-V enhancement support device hyperv # HyperV drivers # Xen HVM Guest Optimizations options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver device xentimer # Xen x86 PV timer device ##################################################################### # # Miscellaneous hardware: # # ipmi: Intelligent Platform Management Interface # pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724) # smbios: DMI/SMBIOS entry point (requires EFIRT option) # vpd: Vital Product Data kernel interface # asmc: Apple System Management Controller # si: Specialix International SI/XIO or SX intelligent serial card # tpm: Trusted Platform Module # Notes on the Specialix SI/XIO driver: # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. device ipmi device pbio envvar hint.pbio.0.at="isa" envvar hint.pbio.0.port="0x360" device smbios device vpd device asmc device tpm device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device aesni # AES-NI OpenCrypto module device ossl # OpenSSL OpenCrypto module device ioat # Intel I/OAT DMA engine # # Laptop/Notebook options: # device backlight # # I2C Bus # # # Hardware watchdog timers: # # ichwd: Intel ICH watchdog timer # amdsbwd: AMD SB7xx watchdog timer # viawd: VIA south bridge watchdog timer # wbwd: Winbond watchdog timer # itwd: ITE Super I/O watchdog timer # device ichwd device amdsbwd device viawd device wbwd device itwd # # Temperature sensors: # # coretemp: on-die sensor on Intel Core and newer CPUs # amdtemp: on-die sensor on AMD K8/K10/K11 CPUs # device coretemp device amdtemp # # CPU control pseudo-device. Provides access to MSRs, CPUID info and # microcode update feature. # device cpuctl # # SuperIO driver. # device superio # # System Management Bus (SMB) # options ENABLE_ALART # Control alarm on Intel intpm driver # # AMD System Management Network (SMN) # device amdsmn # # Number of initial kernel page table pages used for early bootstrap. # This number should include enough pages to map the kernel and any # modules or other data loaded with the kernel by the loader. Each # page table page maps 2MB. # options NKPT=31 # EFI Runtime Services support options EFIRT # # HID-over-I2C support # device iichid # HID-over-I2C support options IICHID_DEBUG # Enable HID-over-I2C debug messages options IICHID_SAMPLING # Workaround missing GPIO INTR support ##################################################################### # ABI Emulation #XXX keep these here for now and reactivate when support for emulating #XXX these 32 bit binaries is added. # Enable 32-bit runtime support for FreeBSD/i386 binaries. options COMPAT_FREEBSD32 # Enable (32-bit) a.out binary support options COMPAT_AOUT ##################################################################### # ZFS support # NB: This depends on crypto, cryptodev and ZSTDIO options ZFS ##################################################################### # VM OPTIONS # KSTACK_PAGES is the number of memory pages to assign to the kernel # stack of each thread. options KSTACK_PAGES=5 # Enable detailed accounting by the PV entry allocator. options PV_STATS ##################################################################### # More undocumented options for linting. # Note that documenting these are not considered an affront. options KBDIO_DEBUG=2 options KBD_MAXRETRY=4 options KBD_MAXWAIT=6 options KBD_RESETDELAY=201 options PSM_DEBUG=1 options TIMER_FREQ=((14318182+6)/12) options VM_KMEM_SIZE options VM_KMEM_SIZE_MAX options VM_KMEM_SIZE_SCALE # GCOV (code coverage) support options LINDEBUGFS options GCOV diff --git a/sys/net80211/ieee80211_node.c b/sys/net80211/ieee80211_node.c index bc8a240811de..8a31a4576b3f 100644 --- a/sys/net80211/ieee80211_node.c +++ b/sys/net80211/ieee80211_node.c @@ -1,3119 +1,3089 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #include #include #include #include +#ifdef IEEE80211_DEBUG_REFCNT +#define __debrefcnt_used +#else +#define __debrefcnt_used __unused +#endif + /* * IEEE80211_NODE_HASHSIZE must be a power of 2. */ CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0); /* * Association id's are managed with a bit vector. */ #define IEEE80211_AID_SET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \ (1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_CLR(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \ ~(1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_ISSET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32))) static int ieee80211_sta_join1(struct ieee80211_node *); static struct ieee80211_node *node_alloc(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); static int node_init(struct ieee80211_node *); static void node_cleanup(struct ieee80211_node *); static void node_free(struct ieee80211_node *); static void node_age(struct ieee80211_node *); static int8_t node_getrssi(const struct ieee80211_node *); static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *); static void node_getmimoinfo(const struct ieee80211_node *, struct ieee80211_mimo_info *); -static void _ieee80211_free_node(struct ieee80211_node *); +static void __ieee80211_free_node(struct ieee80211_node *); static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni); static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keymaxix); static void ieee80211_node_table_reset(struct ieee80211_node_table *, struct ieee80211vap *); static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt); static void ieee80211_vap_erp_timeout(struct ieee80211vap *); MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state"); MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie"); void ieee80211_node_attach(struct ieee80211com *ic) { /* XXX really want maxlen enforced per-sta */ ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8, "802.11 staging q"); ieee80211_node_table_init(ic, &ic->ic_sta, "station", IEEE80211_INACT_INIT, ic->ic_max_keyix); callout_init(&ic->ic_inact, 1); callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); ic->ic_node_alloc = node_alloc; ic->ic_node_init = node_init; ic->ic_node_free = node_free; ic->ic_node_cleanup = node_cleanup; ic->ic_node_age = node_age; ic->ic_node_drain = node_age; /* NB: same as age */ ic->ic_node_getrssi = node_getrssi; ic->ic_node_getsignal = node_getsignal; ic->ic_node_getmimoinfo = node_getmimoinfo; /* * Set flags to be propagated to all vap's; * these define default behaviour/configuration. */ ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */ } void ieee80211_node_detach(struct ieee80211com *ic) { callout_drain(&ic->ic_inact); ieee80211_node_table_cleanup(&ic->ic_sta); ieee80211_ageq_drain(&ic->ic_stageq); ieee80211_ageq_cleanup(&ic->ic_stageq); } void ieee80211_node_vattach(struct ieee80211vap *vap) { /* NB: driver can override */ vap->iv_max_aid = IEEE80211_AID_DEF; /* default station inactivity timer settings */ vap->iv_inact_init = IEEE80211_INACT_INIT; vap->iv_inact_auth = IEEE80211_INACT_AUTH; vap->iv_inact_run = IEEE80211_INACT_RUN; vap->iv_inact_probe = IEEE80211_INACT_PROBE; IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT, "%s: init %u auth %u run %u probe %u\n", __func__, vap->iv_inact_init, vap->iv_inact_auth, vap->iv_inact_run, vap->iv_inact_probe); } void ieee80211_node_latevattach(struct ieee80211vap *vap) { if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* XXX should we allow max aid to be zero? */ if (vap->iv_max_aid < IEEE80211_AID_MIN) { vap->iv_max_aid = IEEE80211_AID_MIN; if_printf(vap->iv_ifp, "WARNING: max aid too small, changed to %d\n", vap->iv_max_aid); } vap->iv_aid_bitmap = (uint32_t *) IEEE80211_MALLOC( howmany(vap->iv_max_aid, 32) * sizeof(uint32_t), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (vap->iv_aid_bitmap == NULL) { /* XXX no way to recover */ printf("%s: no memory for AID bitmap, max aid %d!\n", __func__, vap->iv_max_aid); vap->iv_max_aid = 0; } } ieee80211_reset_bss(vap); vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode); } void ieee80211_node_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ieee80211_node_table_reset(&ic->ic_sta, vap); if (vap->iv_bss != NULL) { ieee80211_free_node(vap->iv_bss); vap->iv_update_bss(vap, NULL); } if (vap->iv_aid_bitmap != NULL) { IEEE80211_FREE(vap->iv_aid_bitmap, M_80211_NODE); vap->iv_aid_bitmap = NULL; } } /* * Port authorize/unauthorize interfaces for use by an authenticator. */ void ieee80211_node_authorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags |= IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_run; ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); } void ieee80211_node_unauthorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags &= ~IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_auth; if (ni->ni_inact > ni->ni_inact_reload) ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u inact %u", __func__, ni->ni_inact_reload, ni->ni_inact); } /* * Fix tx parameters for a node according to ``association state''. */ void ieee80211_node_setuptxparms(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; if (ni->ni_flags & IEEE80211_NODE_VHT) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) mode = IEEE80211_MODE_VHT_5GHZ; else mode = IEEE80211_MODE_VHT_2GHZ; } else if (ni->ni_flags & IEEE80211_NODE_HT) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) mode = IEEE80211_MODE_11NA; else mode = IEEE80211_MODE_11NG; } else { /* legacy rate handling */ if (IEEE80211_IS_CHAN_ST(ni->ni_chan)) mode = IEEE80211_MODE_STURBO_A; else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan)) mode = IEEE80211_MODE_HALF; else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan)) mode = IEEE80211_MODE_QUARTER; /* NB: 108A should be handled as 11a */ else if (IEEE80211_IS_CHAN_A(ni->ni_chan)) mode = IEEE80211_MODE_11A; else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) || (ni->ni_flags & IEEE80211_NODE_ERP)) mode = IEEE80211_MODE_11G; else mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; } /* * Set/change the channel. The rate set is also updated as * to insure a consistent view by drivers. * XXX should be private but hostap needs it to deal with CSA */ void ieee80211_node_set_chan(struct ieee80211_node *ni, struct ieee80211_channel *chan) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel")); ni->ni_chan = chan; mode = ieee80211_chan2mode(chan); if (IEEE80211_IS_CHAN_HT(chan)) { /* * We must install the legacy rate est in ni_rates and the * HT rate set in ni_htrates. */ ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan); /* * Setup bss tx parameters based on operating mode. We * use legacy rates when operating in a mixed HT+non-HT bss * and non-ERP rates in 11g for mixed ERP+non-ERP bss. */ if (mode == IEEE80211_MODE_11NA && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11A; else if (mode == IEEE80211_MODE_11NG && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11G; if (mode == IEEE80211_MODE_11G && (vap->iv_flags & IEEE80211_F_PUREG) == 0) mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; ni->ni_rates = *ieee80211_get_suprates(ic, chan); } static __inline void copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss) { /* propagate useful state */ nbss->ni_authmode = obss->ni_authmode; nbss->ni_txpower = obss->ni_txpower; nbss->ni_vlan = obss->ni_vlan; /* XXX statistics? */ /* XXX legacy WDS bssid? */ } void ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: creating %s on channel %u%c flags 0x%08x\n", __func__, ieee80211_opmode_name[vap->iv_opmode], ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan), chan->ic_flags); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); if (ni == NULL) { /* XXX recovery? */ return; } IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); if (vap->iv_bss != NULL) copy_bss(ni, vap->iv_bss); ni->ni_intval = ic->ic_bintval; if (vap->iv_flags & IEEE80211_F_PRIVACY) ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY; if (ic->ic_phytype == IEEE80211_T_FH) { ni->ni_fhdwell = 200; /* XXX */ ni->ni_fhindex = 1; } if (vap->iv_opmode == IEEE80211_M_IBSS) { ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */ if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else { net80211_get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN); /* clear group bit, add local bit */ ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02; } } else if (vap->iv_opmode == IEEE80211_M_AHDEMO) { if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else #ifdef IEEE80211_SUPPORT_TDMA if ((vap->iv_caps & IEEE80211_C_TDMA) == 0) #endif memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN); #ifdef IEEE80211_SUPPORT_MESH } else if (vap->iv_opmode == IEEE80211_M_MBSS) { ni->ni_meshidlen = vap->iv_mesh->ms_idlen; memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen); #endif } /* * Fix the channel and related attributes. */ /* clear DFS CAC state on previous channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_bsschan->ic_freq != chan->ic_freq && IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) ieee80211_dfs_cac_clear(ic, ic->ic_bsschan); ic->ic_bsschan = chan; ieee80211_node_set_chan(ni, chan); ic->ic_curmode = ieee80211_chan2mode(chan); /* * Do mode-specific setup. */ if (IEEE80211_IS_CHAN_FULL(chan)) { if (IEEE80211_IS_CHAN_ANYG(chan)) { /* * Use a mixed 11b/11g basic rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11G); if (vap->iv_flags & IEEE80211_F_PUREG) { /* * Also mark OFDM rates basic so 11b * stations do not join (WiFi compliance). */ ieee80211_addbasicrates(&ni->ni_rates, IEEE80211_MODE_11A); } } else if (IEEE80211_IS_CHAN_B(chan)) { /* * Force pure 11b rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11B); } } /* XXX TODO: other bits and pieces - eg fast-frames? */ /* If we're an 11n channel then initialise the 11n bits */ if (IEEE80211_IS_CHAN_VHT(ni->ni_chan)) { /* XXX what else? */ ieee80211_ht_node_init(ni); ieee80211_vht_node_init(ni); } else if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { /* XXX what else? */ ieee80211_ht_node_init(ni); } (void) ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Reset bss state on transition to the INIT state. * Clear any stations from the table (they have been * deauth'd) and reset the bss node (clears key, rate * etc. state). */ void ieee80211_reset_bss(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni, *obss; ieee80211_node_table_reset(&ic->ic_sta, vap); /* XXX multi-bss: wrong */ ieee80211_vap_reset_erp(vap); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); KASSERT(ni != NULL, ("unable to setup initial BSS node")); obss = vap->iv_update_bss(vap, ieee80211_ref_node(ni)); if (obss != NULL) { copy_bss(ni, obss); ni->ni_intval = ic->ic_bintval; ieee80211_free_node(obss); } else IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); } static int match_ssid(const struct ieee80211_node *ni, int nssid, const struct ieee80211_scan_ssid ssids[]) { int i; for (i = 0; i < nssid; i++) { if (ni->ni_esslen == ssids[i].len && memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0) return 1; } return 0; } /* * Test a node for suitability/compatibility. */ static int check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) return 0; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return 0; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) return 0; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) return 0; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) return 0; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) return 0; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) return 0; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) return 0; return 1; } #ifdef IEEE80211_DEBUG /* * Display node suitability/compatibility. */ static void check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; int fail; fail = 0; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) fail |= 0x01; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) fail |= 0x02; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) fail |= 0x02; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) fail |= 0x04; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) fail |= 0x04; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) fail |= 0x08; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) fail |= 0x10; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) fail |= 0x20; printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr)); printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' '); printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' '); printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2, fail & 0x08 ? '!' : ' '); printf(" %4s%c", (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" : (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" : "????", fail & 0x02 ? '!' : ' '); printf(" %3s%c ", (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no", fail & 0x04 ? '!' : ' '); ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); printf("%s\n", fail & 0x10 ? "!" : ""); } #endif /* IEEE80211_DEBUG */ int ieee80211_ibss_merge_check(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; if (ni == vap->iv_bss || IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) { /* unchanged, nothing to do */ return 0; } if (!check_bss(vap, ni)) { /* capabilities mismatch */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: merge failed, capabilities mismatch\n", __func__); #ifdef IEEE80211_DEBUG if (ieee80211_msg_assoc(vap)) check_bss_debug(vap, ni); #endif vap->iv_stats.is_ibss_capmismatch++; return 0; } return 1; } /* * Check if the given node should populate the node table. * * We need to be in "see all beacons for all ssids" mode in order * to do IBSS merges, however this means we will populate nodes for * /all/ IBSS SSIDs, versus just the one we care about. * * So this check ensures the node can actually belong to our IBSS * configuration. For now it simply checks the SSID. */ int ieee80211_ibss_node_check_new(struct ieee80211_node *ni, const struct ieee80211_scanparams *scan) { struct ieee80211vap *vap = ni->ni_vap; int i; /* * If we have no SSID and no scan SSID, return OK. */ if (vap->iv_des_nssid == 0 && scan->ssid == NULL) goto ok; /* * If we have one of (SSID, scan SSID) then return error. */ if (!! (vap->iv_des_nssid == 0) != !! (scan->ssid == NULL)) goto mismatch; /* * Double-check - we need scan SSID. */ if (scan->ssid == NULL) goto mismatch; /* * Check if the scan SSID matches the SSID list for the VAP. */ for (i = 0; i < vap->iv_des_nssid; i++) { /* Sanity length check */ if (vap->iv_des_ssid[i].len != scan->ssid[1]) continue; /* Note: SSID in the scan entry is the IE format */ if (memcmp(vap->iv_des_ssid[i].ssid, scan->ssid + 2, vap->iv_des_ssid[i].len) == 0) goto ok; } mismatch: return (0); ok: return (1); } /* * Handle 802.11 ad hoc network merge. The * convention, set by the Wireless Ethernet Compatibility Alliance * (WECA), is that an 802.11 station will change its BSSID to match * the "oldest" 802.11 ad hoc network, on the same channel, that * has the station's desired SSID. The "oldest" 802.11 network * sends beacons with the greatest TSF timestamp. * * The caller is assumed to validate TSF's before attempting a merge. * * Return !0 if the BSSID changed, 0 otherwise. */ int ieee80211_ibss_merge(struct ieee80211_node *ni) { #ifdef IEEE80211_DEBUG struct ieee80211vap *vap = ni->ni_vap; #endif if (! ieee80211_ibss_merge_check(ni)) return 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: new bssid %s: %s preamble, %s slot time%s\n", __func__, ether_sprintf(ni->ni_bssid), vap->iv_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", vap->iv_flags&IEEE80211_F_SHSLOT ? "short" : "long", vap->iv_flags&IEEE80211_F_USEPROT ? ", protection" : "" ); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Calculate HT channel promotion flags for all vaps. * This assumes ni_chan have been setup for each vap. */ static int gethtadjustflags(struct ieee80211com *ic) { struct ieee80211vap *vap; int flags; flags = 0; /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_state < IEEE80211_S_RUN) continue; switch (vap->iv_opmode) { case IEEE80211_M_WDS: case IEEE80211_M_STA: case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: case IEEE80211_M_IBSS: case IEEE80211_M_MBSS: flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan); break; default: break; } } return flags; } /* * Calculate VHT channel promotion flags for all vaps. * This assumes ni_chan have been setup for each vap. */ static int getvhtadjustflags(struct ieee80211com *ic) { struct ieee80211vap *vap; int flags; flags = 0; /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_state < IEEE80211_S_RUN) continue; switch (vap->iv_opmode) { case IEEE80211_M_WDS: case IEEE80211_M_STA: case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: case IEEE80211_M_IBSS: case IEEE80211_M_MBSS: flags |= ieee80211_vhtchanflags(vap->iv_bss->ni_chan); break; default: break; } } return flags; } /* * Check if the current channel needs to change based on whether * any vap's are using HT20/HT40. This is used to sync the state * of ic_curchan after a channel width change on a running vap. * * Same applies for VHT. */ void ieee80211_sync_curchan(struct ieee80211com *ic) { struct ieee80211_channel *c; c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic)); c = ieee80211_vht_adjust_channel(ic, c, getvhtadjustflags(ic)); if (c != ic->ic_curchan) { ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } } /* * Setup the current channel. The request channel may be * promoted if other vap's are operating with HT20/HT40. */ void ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { if (ic->ic_htcaps & IEEE80211_HTC_HT) { int flags = gethtadjustflags(ic); /* * Check for channel promotion required to support the * set of running vap's. This assumes we are called * after ni_chan is setup for each vap. */ /* XXX VHT? */ /* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */ if (flags > ieee80211_htchanflags(c)) c = ieee80211_ht_adjust_channel(ic, c, flags); } /* * VHT promotion - this will at least promote to VHT20/40 * based on what HT has done; it may further promote the * channel to VHT80 or above. */ if (ic->ic_vhtcaps != 0) { int flags = getvhtadjustflags(ic); if (flags > ieee80211_vhtchanflags(c)) c = ieee80211_vht_adjust_channel(ic, c, flags); } ic->ic_bsschan = ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); } /* * Change the current channel. The channel change is guaranteed to have * happened before the next state change. */ void ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { ieee80211_setupcurchan(ic, c); ieee80211_runtask(ic, &ic->ic_chan_task); } void ieee80211_update_chw(struct ieee80211com *ic) { ieee80211_setupcurchan(ic, ic->ic_curchan); ieee80211_runtask(ic, &ic->ic_chw_task); } /* * Join the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ static int ieee80211_sta_join1(struct ieee80211_node *selbs) { struct ieee80211vap *vap = selbs->ni_vap; struct ieee80211com *ic = selbs->ni_ic; struct ieee80211_node *obss; int canreassoc; /* * Committed to selbs, setup state. */ obss = vap->iv_update_bss(vap, selbs); /* NB: caller assumed to bump refcnt */ /* * Check if old+new node have the same address in which * case we can reassociate when operating in sta mode. */ /* XXX We'll not be in RUN anymore as iv_state got updated already? */ canreassoc = (obss != NULL && vap->iv_state == IEEE80211_S_RUN && IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr)); if (obss != NULL) { struct ieee80211_node_table *nt = obss->ni_table; copy_bss(selbs, obss); ieee80211_node_decref(obss); /* iv_bss reference */ IEEE80211_NODE_LOCK(nt); node_reclaim(nt, obss); /* station table reference */ IEEE80211_NODE_UNLOCK(nt); obss = NULL; /* NB: guard against later use */ } /* * Delete unusable rates; we've already checked * that the negotiated rate set is acceptable. */ ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates, IEEE80211_F_DODEL | IEEE80211_F_JOIN); ieee80211_setcurchan(ic, selbs->ni_chan); /* * Set the erp state (mostly the slot time) to deal with * the auto-select case; this should be redundant if the * mode is locked. */ ieee80211_vap_reset_erp(vap); ieee80211_wme_initparams(vap); if (vap->iv_opmode == IEEE80211_M_STA) { if (canreassoc) { /* Reassociate */ ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1); } else { /* * Act as if we received a DEAUTH frame in case we * are invoked from the RUN state. This will cause * us to try to re-authenticate if we are operating * as a station. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_AUTH, "%s %p<%s> %s -> AUTH, FC0_SUBTYPE_DEAUTH\n", __func__, selbs, ether_sprintf(selbs->ni_macaddr), ieee80211_state_name[vap->iv_state]); ieee80211_new_state(vap, IEEE80211_S_AUTH, IEEE80211_FC0_SUBTYPE_DEAUTH); } } else ieee80211_new_state(vap, IEEE80211_S_RUN, -1); return 1; } int ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan, const struct ieee80211_scan_entry *se) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; int do_ht = 0; ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr); if (ni == NULL) { /* XXX msg */ return 0; } /* * Expand scan state into node's format. * XXX may not need all this stuff */ IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid); ni->ni_esslen = se->se_ssid[1]; memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen); ni->ni_tstamp.tsf = se->se_tstamp.tsf; ni->ni_intval = se->se_intval; ni->ni_capinfo = se->se_capinfo; ni->ni_chan = chan; ni->ni_timoff = se->se_timoff; ni->ni_fhdwell = se->se_fhdwell; ni->ni_fhindex = se->se_fhindex; ni->ni_erp = se->se_erp; IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi); ni->ni_noise = se->se_noise; if (vap->iv_opmode == IEEE80211_M_STA) { /* NB: only infrastructure mode requires an associd */ ni->ni_flags |= IEEE80211_NODE_ASSOCID; } if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) { ieee80211_ies_expand(&ni->ni_ies); #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_ies.meshid_ie != NULL) ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie); #endif #ifdef IEEE80211_SUPPORT_TDMA if (ni->ni_ies.tdma_ie != NULL) ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie); #endif if (ni->ni_ies.vhtcap_ie != NULL) ieee80211_parse_vhtcap(ni, ni->ni_ies.vhtcap_ie); if (ni->ni_ies.vhtopmode_ie != NULL) ieee80211_parse_vhtopmode(ni, ni->ni_ies.vhtopmode_ie); /* XXX parse BSSLOAD IE */ /* XXX parse TXPWRENV IE */ /* XXX parse APCHANREP IE */ } vap->iv_dtim_period = se->se_dtimperiod; vap->iv_dtim_count = 0; /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, se->se_rates, se->se_xrates, IEEE80211_F_DOSORT); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; /* * Setup HT state for this node if it's available, otherwise * non-STA modes won't pick this state up. * * For IBSS and related modes that don't go through an * association request/response, the only appropriate place * to setup the HT state is here. */ if (ni->ni_ies.htinfo_ie != NULL && ni->ni_ies.htcap_ie != NULL && vap->iv_flags_ht & IEEE80211_FHT_HT) { ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); do_ht = 1; } /* * Setup VHT state for this node if it's available. * Same as the above. * * For now, don't allow 2GHz VHT operation. */ if (ni->ni_ies.vhtopmode_ie != NULL && ni->ni_ies.vhtcap_ie != NULL && vap->iv_flags_vht & IEEE80211_FVHT_VHT) { if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) { printf("%s: BSS %6D: 2GHz channel, VHT info; ignoring\n", __func__, ni->ni_macaddr, ":"); } else { ieee80211_vht_node_init(ni); ieee80211_vht_updateparams(ni, ni->ni_ies.vhtcap_ie, ni->ni_ies.vhtopmode_ie); ieee80211_setup_vht_rates(ni, ni->ni_ies.vhtcap_ie, ni->ni_ies.vhtopmode_ie); do_ht = 1; } } /* Finally do the node channel change */ if (do_ht) { ieee80211_ht_updateparams_final(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); } /* XXX else check for ath FF? */ /* XXX QoS? Difficult given that WME config is specific to a master */ ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Leave the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ void ieee80211_sta_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ic->ic_node_cleanup(ni); ieee80211_notify_node_leave(ni); } /* * Send a deauthenticate frame and drop the station. */ void ieee80211_node_deauth(struct ieee80211_node *ni, int reason) { /* NB: bump the refcnt to be sure temporary nodes are not reclaimed */ ieee80211_ref_node(ni); if (ni->ni_associd != 0) IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason); ieee80211_node_leave(ni); ieee80211_free_node(ni); } static struct ieee80211_node * node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; ni = (struct ieee80211_node *) IEEE80211_MALLOC(sizeof(struct ieee80211_node), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); return ni; } static int node_init(struct ieee80211_node *ni) { return 0; } /* * Initialize an ie blob with the specified data. If previous * data exists re-use the data block. As a side effect we clear * all references to specific ie's; the caller is required to * recalculate them. */ int ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len) { /* NB: assumes data+len are the last fields */ memset(ies, 0, offsetof(struct ieee80211_ies, data)); if (ies->data != NULL && ies->len != len) { /* data size changed */ IEEE80211_FREE(ies->data, M_80211_NODE_IE); ies->data = NULL; } if (ies->data == NULL) { ies->data = (uint8_t *) IEEE80211_MALLOC(len, M_80211_NODE_IE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ies->data == NULL) { ies->len = 0; /* NB: pointers have already been zero'd above */ return 0; } } memcpy(ies->data, data, len); ies->len = len; return 1; } /* * Reclaim storage for an ie blob. */ void ieee80211_ies_cleanup(struct ieee80211_ies *ies) { if (ies->data != NULL) IEEE80211_FREE(ies->data, M_80211_NODE_IE); } /* * Expand an ie blob data contents and to fillin individual * ie pointers. The data blob is assumed to be well-formed; * we don't do any validity checking of ie lengths. */ void ieee80211_ies_expand(struct ieee80211_ies *ies) { uint8_t *ie; int ielen; ie = ies->data; ielen = ies->len; while (ielen > 1) { /* Make sure the given IE length fits into the total length. */ if ((2 + ie[1]) > ielen) { printf("%s: malformed IEs! ies %p { data %p len %d }: " "ie %u len 2+%u > total len left %d\n", __func__, ies, ies->data, ies->len, ie[0], ie[1], ielen); return; } switch (ie[0]) { case IEEE80211_ELEMID_VENDOR: if (iswpaoui(ie)) ies->wpa_ie = ie; else if (iswmeoui(ie)) ies->wme_ie = ie; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(ie)) ies->ath_ie = ie; #endif #ifdef IEEE80211_SUPPORT_TDMA else if (istdmaoui(ie)) ies->tdma_ie = ie; #endif break; case IEEE80211_ELEMID_RSN: ies->rsn_ie = ie; break; case IEEE80211_ELEMID_HTCAP: ies->htcap_ie = ie; break; case IEEE80211_ELEMID_HTINFO: ies->htinfo_ie = ie; break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_ELEMID_MESHID: ies->meshid_ie = ie; break; #endif case IEEE80211_ELEMID_VHT_CAP: ies->vhtcap_ie = ie; break; case IEEE80211_ELEMID_VHT_OPMODE: ies->vhtopmode_ie = ie; break; case IEEE80211_ELEMID_VHT_PWR_ENV: ies->vhtpwrenv_ie = ie; break; case IEEE80211_ELEMID_BSSLOAD: ies->bssload_ie = ie; break; case IEEE80211_ELEMID_APCHANREP: ies->apchanrep_ie = ie; break; } ielen -= 2 + ie[1]; ie += 2 + ie[1]; } } /* * Reclaim any resources in a node and reset any critical * state. Typically nodes are free'd immediately after, * but in some cases the storage may be reused so we need * to insure consistent state (should probably fix that). */ static void node_cleanup(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int i; /* NB: preserve ni_table */ if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) { if (vap->iv_opmode != IEEE80211_M_STA) vap->iv_ps_sta--; ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT; IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, "power save mode off, %u sta's in ps mode", vap->iv_ps_sta); } /* * Cleanup any VHT and HT-related state. */ if (ni->ni_flags & IEEE80211_NODE_VHT) ieee80211_vht_node_cleanup(ni); if (ni->ni_flags & IEEE80211_NODE_HT) ieee80211_ht_node_cleanup(ni); #ifdef IEEE80211_SUPPORT_SUPERG /* Always do FF node cleanup; for A-MSDU */ ieee80211_ff_node_cleanup(ni); #endif #ifdef IEEE80211_SUPPORT_MESH /* * Cleanup any mesh-related state. */ if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_cleanup(ni); #endif /* * Clear any staging queue entries. */ ieee80211_ageq_drain_node(&ic->ic_stageq, ni); /* * Clear AREF flag that marks the authorization refcnt bump * has happened. This is probably not needed as the node * should always be removed from the table so not found but * do it just in case. * Likewise clear the ASSOCID flag as these flags are intended * to be managed in tandem. */ ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID); /* * Drain power save queue and, if needed, clear TIM. */ if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); ni->ni_associd = 0; if (ni->ni_challenge != NULL) { IEEE80211_FREE(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } /* * Preserve SSID, WPA, and WME ie's so the bss node is * reusable during a re-auth/re-assoc state transition. * If we remove these data they will not be recreated * because they come from a probe-response or beacon frame * which cannot be expected prior to the association-response. * This should not be an issue when operating in other modes * as stations leaving always go through a full state transition * which will rebuild this state. * * XXX does this leave us open to inheriting old state? */ for (i = 0; i < nitems(ni->ni_rxfrag); i++) if (ni->ni_rxfrag[i] != NULL) { m_freem(ni->ni_rxfrag[i]); ni->ni_rxfrag[i] = NULL; } /* * Must be careful here to remove any key map entry w/o a LOR. */ ieee80211_node_delucastkey(ni); } static void node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ieee80211_ratectl_node_deinit(ni); ic->ic_node_cleanup(ni); ieee80211_ies_cleanup(&ni->ni_ies); ieee80211_psq_cleanup(&ni->ni_psq); IEEE80211_FREE(ni, M_80211_NODE); } static void node_age(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; /* * Age frames on the power save queue. */ if (ieee80211_node_psq_age(ni) != 0 && ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); /* * Age out HT resources (e.g. frames on the * A-MPDU reorder queues). */ if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT)) ieee80211_ht_node_age(ni); } static int8_t node_getrssi(const struct ieee80211_node *ni) { uint32_t avgrssi = ni->ni_avgrssi; int32_t rssi; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) return 0; rssi = IEEE80211_RSSI_GET(avgrssi); return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } static void node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) { *rssi = node_getrssi(ni); *noise = ni->ni_noise; } static void node_getmimoinfo(const struct ieee80211_node *ni, struct ieee80211_mimo_info *info) { int i; uint32_t avgrssi; int32_t rssi; bzero(info, sizeof(*info)); for (i = 0; i < MIN(IEEE80211_MAX_CHAINS, ni->ni_mimo_chains); i++) { /* Note: for now, just pri20 channel info */ avgrssi = ni->ni_mimo_rssi_ctl[i]; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) { info->ch[i].rssi[0] = 0; } else { rssi = IEEE80211_RSSI_GET(avgrssi); info->ch[i].rssi[0] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } info->ch[i].noise[0] = ni->ni_mimo_noise_ctl[i]; } /* XXX ext radios? */ /* XXX EVM? */ } static void ieee80211_add_node_nt(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { struct ieee80211com *ic = nt->nt_ic; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(ic, ni->ni_macaddr); (void) ic; /* XXX IEEE80211_NODE_HASH */ TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list); LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash); nt->nt_count++; ni->ni_table = nt; } static void ieee80211_del_node_nt(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { IEEE80211_NODE_LOCK_ASSERT(nt); TAILQ_REMOVE(&nt->nt_node, ni, ni_list); LIST_REMOVE(ni, ni_hash); nt->nt_count--; KASSERT(nt->nt_count >= 0, ("nt_count is negative (%d)!\n", nt->nt_count)); ni->ni_table = NULL; } struct ieee80211_node * ieee80211_alloc_node(struct ieee80211_node_table *nt, struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = nt->nt_ic; struct ieee80211_node *ni; ni = ic->ic_node_alloc(vap, macaddr); if (ni == NULL) { vap->iv_stats.is_rx_nodealloc++; return NULL; } IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(macaddr), nt->nt_name); IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); ieee80211_node_initref(ni); /* mark referenced */ ni->ni_chan = IEEE80211_CHAN_ANYC; ni->ni_authmode = IEEE80211_AUTH_OPEN; ni->ni_txpower = ic->ic_txpowlimit; /* max power */ ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER; ni->ni_inact_reload = nt->nt_inact_init; ni->ni_inact = ni->ni_inact_reload; ni->ni_ath_defkeyix = 0x7fff; ieee80211_psq_init(&ni->ni_psq, "unknown"); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_init(vap, ni); #endif IEEE80211_NODE_LOCK(nt); ieee80211_add_node_nt(nt, ni); ni->ni_vap = vap; ni->ni_ic = ic; IEEE80211_NODE_UNLOCK(nt); /* handle failure; free node state */ if (ic->ic_node_init(ni) != 0) { vap->iv_stats.is_rx_nodealloc++; ieee80211_psq_cleanup(&ni->ni_psq); ieee80211_ratectl_node_deinit(ni); - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); return NULL; } IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); return ni; } /* * Craft a temporary node suitable for sending a management frame * to the specified station. We craft only as much state as we * need to do the work since the node will be immediately reclaimed * once the send completes. */ struct ieee80211_node * ieee80211_tmp_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ic->ic_node_alloc(vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr)); ni->ni_table = NULL; /* NB: pedantic */ ni->ni_ic = ic; /* NB: needed to set channel */ ni->ni_vap = vap; IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_initref(ni); /* mark referenced */ /* NB: required by ieee80211_fix_rate */ ieee80211_node_set_chan(ni, bss->ni_chan); ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_txpower = bss->ni_txpower; /* XXX optimize away */ ieee80211_psq_init(&ni->ni_psq, "unknown"); ieee80211_ratectl_node_init(ni); /* handle failure; free node state */ if (ic->ic_node_init(ni) != 0) { vap->iv_stats.is_rx_nodealloc++; ieee80211_psq_cleanup(&ni->ni_psq); ieee80211_ratectl_node_deinit(ni); - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); return NULL; } } else { /* XXX msg */ vap->iv_stats.is_rx_nodealloc++; } return ni; } struct ieee80211_node * ieee80211_dup_bss(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; /* * Inherit from iv_bss. */ copy_bss(ni, bss); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_set_chan(ni, bss->ni_chan); } return ni; } /* * Create a bss node for a legacy WDS vap. The far end does * not associate so we just create create a new node and * simulate an association. The caller is responsible for * installing the node as the bss node and handling any further * setup work like authorizing the port. */ struct ieee80211_node * ieee80211_node_create_wds(struct ieee80211vap *vap, const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; /* XXX check if node already in sta table? */ ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid); if (ni != NULL) { ni->ni_wdsvap = vap; IEEE80211_ADDR_COPY(ni->ni_bssid, bssid); /* * Inherit any manually configured settings. */ copy_bss(ni, vap->iv_bss); ieee80211_node_set_chan(ni, chan); /* NB: propagate ssid so available to WPA supplicant */ ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); /* NB: no associd for peer */ /* * There are no management frames to use to * discover neighbor capabilities, so blindly * propagate the local configuration. */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif /* XXX VHT */ if ((ic->ic_htcaps & IEEE80211_HTC_HT) && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { /* * Device is HT-capable and HT is enabled for * the vap; setup HT operation. On return * ni_chan will be adjusted to an HT channel. */ ieee80211_ht_wds_init(ni); if (vap->iv_flags_vht & IEEE80211_FVHT_VHT) { printf("%s: TODO: vht_wds_init\n", __func__); } } else { struct ieee80211_channel *c = ni->ni_chan; /* * Force a legacy channel to be used. */ c = ieee80211_find_channel(ic, c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT); KASSERT(c != NULL, ("no legacy channel, %u/%x", ni->ni_chan->ic_freq, ni->ni_chan->ic_flags)); ni->ni_chan = c; } } return ni; } struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt, - const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) -#else -ieee80211_find_node_locked(struct ieee80211_node_table *nt, - const uint8_t macaddr[IEEE80211_ADDR_LEN]) -#endif +_ieee80211_find_node_locked(struct ieee80211_node_table *nt, + const uint8_t macaddr[IEEE80211_ADDR_LEN], + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_node_debug(struct ieee80211_node_table *nt, - const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) -#else -ieee80211_find_node(struct ieee80211_node_table *nt, - const uint8_t macaddr[IEEE80211_ADDR_LEN]) -#endif +_ieee80211_find_node(struct ieee80211_node_table *nt, + const uint8_t macaddr[IEEE80211_ADDR_LEN], + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); - ni = ieee80211_find_node_locked(nt, macaddr); + ni = _ieee80211_find_node_locked(nt, macaddr, func, line); IEEE80211_NODE_UNLOCK(nt); return ni; } struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt, - const struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) -#else -ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt, - const struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN]) -#endif +_ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt, + const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (ni->ni_vap == vap && IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt, - const struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) -#else -ieee80211_find_vap_node(struct ieee80211_node_table *nt, - const struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN]) -#endif +_ieee80211_find_vap_node(struct ieee80211_node_table *nt, + const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); - ni = ieee80211_find_vap_node_locked(nt, vap, macaddr); + ni = _ieee80211_find_vap_node_locked(nt, vap, macaddr, func, line); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Fake up a node; this handles node discovery in adhoc mode. * Note that for the driver's benefit we we treat this like * an association so the driver has an opportunity to setup * it's private state. */ struct ieee80211_node * ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(macaddr)); ni = ieee80211_dup_bss(vap, macaddr); if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; /* XXX no rate negotiation; just dup */ ni->ni_rates = vap->iv_bss->ni_rates; if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; if (vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc demo mode there are no management * frames to use to discover neighbor capabilities, * so blindly propagate the local configuration * so we can do interesting things (e.g. use * WME to disable ACK's). */ /* * XXX TODO: 11n? */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif } ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); /* * XXX TODO: 11n? At least 20MHz, at least A-MPDU RX, * not A-MPDU TX; not 11n rates, etc. We'll cycle * that after we hear that we can indeed do 11n * (either by a beacon frame or by a probe response.) */ /* * This is the first time we see the node. */ if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* * Kick off a probe request to the given node; * we will then use the probe response to update * 11n/etc configuration state. * * XXX TODO: this isn't guaranteed, and until we get * a probe response, we won't be able to actually * do anything 802.11n related to the node. * So if this does indeed work, maybe we should hold * off on sending responses until we get the probe * response, or just default to some sensible subset * of 802.11n behaviour (eg always allow aggregation * negotiation TO us, but not FROM us, etc) so we * aren't entirely busted. */ if (vap->iv_opmode == IEEE80211_M_IBSS) { ieee80211_send_probereq(ni, /* node */ vap->iv_myaddr, /* SA */ ni->ni_macaddr, /* DA */ vap->iv_bss->ni_bssid, /* BSSID */ vap->iv_bss->ni_essid, vap->iv_bss->ni_esslen); /* SSID */ } /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } void ieee80211_init_neighbor(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { int do_ht_setup = 0, do_vht_setup = 0; ni->ni_esslen = sp->ssid[1]; memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]); IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3); memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp)); ni->ni_intval = sp->bintval; ni->ni_capinfo = sp->capinfo; ni->ni_chan = ni->ni_ic->ic_curchan; ni->ni_fhdwell = sp->fhdwell; ni->ni_fhindex = sp->fhindex; ni->ni_erp = sp->erp; ni->ni_timoff = sp->timoff; #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_init_neighbor(ni, wh, sp); #endif if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) { ieee80211_ies_expand(&ni->ni_ies); if (ni->ni_ies.wme_ie != NULL) ni->ni_flags |= IEEE80211_NODE_QOS; else ni->ni_flags &= ~IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); if (ni->ni_ies.vhtcap_ie != NULL) ieee80211_parse_vhtcap(ni, ni->ni_ies.vhtcap_ie); if (ni->ni_ies.vhtopmode_ie != NULL) ieee80211_parse_vhtopmode(ni, ni->ni_ies.vhtopmode_ie); if ((ni->ni_ies.htcap_ie != NULL) && (ni->ni_ies.htinfo_ie != NULL) && (ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) { do_ht_setup = 1; } if ((ni->ni_ies.vhtcap_ie != NULL) && (ni->ni_ies.vhtopmode_ie != NULL) && (ni->ni_vap->iv_flags_vht & IEEE80211_FVHT_VHT)) { do_vht_setup = 1; } } /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, sp->rates, sp->xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); /* * If the neighbor is HT compatible, flip that on. */ if (do_ht_setup) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: doing HT setup\n", __func__); ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); if (do_vht_setup) { if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) { printf("%s: BSS %6D: 2GHz channel, VHT info; ignoring\n", __func__, ni->ni_macaddr, ":"); } else { ieee80211_vht_node_init(ni); ieee80211_vht_updateparams(ni, ni->ni_ies.vhtcap_ie, ni->ni_ies.vhtopmode_ie); ieee80211_setup_vht_rates(ni, ni->ni_ies.vhtcap_ie, ni->ni_ies.vhtopmode_ie); } } /* * Finally do the channel upgrade/change based * on the HT/VHT configuration. */ ieee80211_ht_updateparams_final(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); /* Reassociate; we're now 11n/11ac */ /* * XXX TODO: this is the wrong thing to do - * we're calling it with isnew=1 so the ath(4) * driver reinitialises the rate tables. * This "mostly" works for ath(4), but it won't * be right for firmware devices which allocate * node states. * * So, do we just create a new node and delete * the old one? Or? */ if (ni->ni_ic->ic_newassoc) ni->ni_ic->ic_newassoc(ni, 1); } } /* * Do node discovery in adhoc mode on receipt of a beacon * or probe response frame. Note that for the driver's * benefit we we treat this like an association so the * driver has an opportunity to setup it's private state. */ struct ieee80211_node * ieee80211_add_neighbor(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2)); ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */ if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; ieee80211_init_neighbor(ni, wh, sp); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } #define IS_PROBEREQ(wh) \ ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \ == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ)) #define IS_BCAST_PROBEREQ(wh) \ (IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \ ((const struct ieee80211_frame *)(wh))->i_addr3)) static __inline struct ieee80211_node * _find_rxnode(struct ieee80211_node_table *nt, - const struct ieee80211_frame_min *wh) + const struct ieee80211_frame_min *wh, + const char *func __debrefcnt_used, int line __debrefcnt_used) { if (IS_BCAST_PROBEREQ(wh)) return NULL; /* spam bcast probe req to all vap's */ - return ieee80211_find_node_locked(nt, wh->i_addr2); + return _ieee80211_find_node_locked(nt, wh->i_addr2, func, line); } /* * Locate the node for sender, track state, and then pass the * (referenced) node up to the 802.11 layer for its use. Note * we can return NULL if the sender is not in the table. */ struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_rxnode_debug(struct ieee80211com *ic, - const struct ieee80211_frame_min *wh, const char *func, int line) -#else -ieee80211_find_rxnode(struct ieee80211com *ic, - const struct ieee80211_frame_min *wh) -#endif +_ieee80211_find_rxnode(struct ieee80211com *ic, + const struct ieee80211_frame_min *wh, + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); - ni = _find_rxnode(nt, wh); + ni = _find_rxnode(nt, wh, func, line); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Like ieee80211_find_rxnode but use the supplied h/w * key index as a hint to locate the node in the key * mapping table. If an entry is present at the key * index we return it; otherwise do a normal lookup and * update the mapping table if the station has a unicast * key assigned to it. */ struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic, - const struct ieee80211_frame_min *wh, ieee80211_keyix keyix, - const char *func, int line) -#else -ieee80211_find_rxnode_withkey(struct ieee80211com *ic, - const struct ieee80211_frame_min *wh, ieee80211_keyix keyix) -#endif +_ieee80211_find_rxnode_withkey(struct ieee80211com *ic, + const struct ieee80211_frame_min *wh, ieee80211_keyix keyix, + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) ni = nt->nt_keyixmap[keyix]; else ni = NULL; if (ni == NULL) { - ni = _find_rxnode(nt, wh); + ni = _find_rxnode(nt, wh, func, line); if (ni != NULL && nt->nt_keyixmap != NULL) { /* * If the station has a unicast key cache slot * assigned update the key->node mapping table. */ keyix = ni->ni_ucastkey.wk_rxkeyix; /* XXX can keyixmap[keyix] != NULL? */ if (keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == NULL) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: add key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni); } } } else { if (IS_BCAST_PROBEREQ(wh)) ni = NULL; /* spam bcast probe req to all vap's */ else ieee80211_ref_node(ni); } IEEE80211_NODE_UNLOCK(nt); return ni; } #undef IS_BCAST_PROBEREQ #undef IS_PROBEREQ /* * Return a reference to the appropriate node for sending * a data frame. This handles node discovery in adhoc networks. */ struct ieee80211_node * -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_find_txnode_debug(struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN], - const char *func, int line) -#else -ieee80211_find_txnode(struct ieee80211vap *vap, - const uint8_t macaddr[IEEE80211_ADDR_LEN]) -#endif +_ieee80211_find_txnode(struct ieee80211vap *vap, + const uint8_t macaddr[IEEE80211_ADDR_LEN], + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta; struct ieee80211_node *ni; /* * The destination address should be in the node table * unless this is a multicast/broadcast frame. We can * also optimize station mode operation, all frames go * to the bss node. */ /* XXX can't hold lock across dup_bss 'cuz of recursive locking */ IEEE80211_NODE_LOCK(nt); if (vap->iv_opmode == IEEE80211_M_STA || vap->iv_opmode == IEEE80211_M_WDS || IEEE80211_IS_MULTICAST(macaddr)) ni = ieee80211_ref_node(vap->iv_bss); else - ni = ieee80211_find_node_locked(nt, macaddr); + ni = _ieee80211_find_node_locked(nt, macaddr, func, line); IEEE80211_NODE_UNLOCK(nt); if (ni == NULL) { if (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc mode cons up a node for the destination. * Note that we need an additional reference for the * caller to be consistent with * ieee80211_find_node_locked. */ /* * XXX TODO: this doesn't fake up 11n state; we need * to find another way to get it upgraded. */ ni = ieee80211_fakeup_adhoc_node(vap, macaddr); if (ni != NULL) (void) ieee80211_ref_node(ni); } else { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr, "no node, discard frame (%s)", __func__); vap->iv_stats.is_tx_nonode++; } } return ni; } static void -_ieee80211_free_node(struct ieee80211_node *ni) +__ieee80211_free_node(struct ieee80211_node *ni) { struct ieee80211_node_table *nt = ni->ni_table; /* * NB: careful about referencing the vap as it may be * gone if the last reference was held by a driver. * We know the com will always be present so it's safe * to use ni_ic below to reclaim resources. */ #if 0 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt != NULL ? nt->nt_name : ""); #endif if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } if (nt != NULL) ieee80211_del_node_nt(nt, ni); ni->ni_ic->ic_node_free(ni); } /* * Clear any entry in the unicast key mapping table. */ static int node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { ieee80211_keyix keyix; keyix = ni->ni_ucastkey.wk_rxkeyix; if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == ni) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: %p<%s> clear key map entry %u\n", __func__, ni, ether_sprintf(ni->ni_macaddr), keyix); nt->nt_keyixmap[keyix] = NULL; ieee80211_node_decref(ni); return 1; } return 0; } void -#ifdef IEEE80211_DEBUG_REFCNT -ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line) -#else -ieee80211_free_node(struct ieee80211_node *ni) -#endif +_ieee80211_free_node(struct ieee80211_node *ni, + const char *func __debrefcnt_used, int line __debrefcnt_used) { struct ieee80211_node_table *nt = ni->ni_table; #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); #endif if (nt != NULL) { IEEE80211_NODE_LOCK(nt); if (ieee80211_node_dectestref(ni)) { /* * Last reference, reclaim state. */ - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); } else if (ieee80211_node_refcnt(ni) == 1) if (node_clear_keyixmap(nt, ni)) - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); IEEE80211_NODE_UNLOCK(nt); } else { if (ieee80211_node_dectestref(ni)) - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); } } /* * Reclaim a unicast key and clear any key cache state. */ int ieee80211_node_delucastkey(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *nikey; ieee80211_keyix keyix; int isowned, status; /* * NB: We must beware of LOR here; deleting the key * can cause the crypto layer to block traffic updates * which can generate a LOR against the node table lock; * grab it here and stash the key index for our use below. * * Must also beware of recursion on the node table lock. * When called from node_cleanup we may already have * the node table lock held. Unfortunately there's no * way to separate out this path so we must do this * conditionally. */ isowned = IEEE80211_NODE_IS_LOCKED(nt); if (!isowned) IEEE80211_NODE_LOCK(nt); nikey = NULL; status = 1; /* NB: success */ if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) { keyix = ni->ni_ucastkey.wk_rxkeyix; status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) { nikey = nt->nt_keyixmap[keyix]; nt->nt_keyixmap[keyix] = NULL; } } if (!isowned) IEEE80211_NODE_UNLOCK(nt); if (nikey != NULL) { KASSERT(nikey == ni, ("key map out of sync, ni %p nikey %p", ni, nikey)); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: delete key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); ieee80211_free_node(ni); } return status; } /* * Reclaim a node. If this is the last reference count then * do the normal free work. Otherwise remove it from the node * table and mark it gone by clearing the back-reference. */ static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { IEEE80211_NODE_LOCK_ASSERT(nt); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: remove %p<%s> from %s table, refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt->nt_name, ieee80211_node_refcnt(ni)-1); /* * Clear any entry in the unicast key mapping table. * We need to do it here so rx lookups don't find it * in the mapping table even if it's not in the hash * table. We cannot depend on the mapping table entry * being cleared because the node may not be free'd. */ (void)node_clear_keyixmap(nt, ni); if (!ieee80211_node_dectestref(ni)) { /* * Other references are present, just remove the * node from the table so it cannot be found. When * the references are dropped storage will be * reclaimed. */ ieee80211_del_node_nt(nt, ni); } else - _ieee80211_free_node(ni); + __ieee80211_free_node(ni); } /* * Node table support. */ static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keyixmax) { nt->nt_ic = ic; IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name); TAILQ_INIT(&nt->nt_node); nt->nt_count = 0; nt->nt_name = name; nt->nt_inact_init = inact; nt->nt_keyixmax = keyixmax; if (nt->nt_keyixmax > 0) { nt->nt_keyixmap = (struct ieee80211_node **) IEEE80211_MALLOC( keyixmax * sizeof(struct ieee80211_node *), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (nt->nt_keyixmap == NULL) ic_printf(ic, "Cannot allocate key index map with %u entries\n", keyixmax); } else nt->nt_keyixmap = NULL; } static void ieee80211_node_table_reset(struct ieee80211_node_table *nt, struct ieee80211vap *match) { struct ieee80211_node *ni, *next; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) { if (match != NULL && ni->ni_vap != match) continue; /* XXX can this happen? if so need's work */ if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } ni->ni_wdsvap = NULL; /* clear reference */ node_reclaim(nt, ni); } if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) { /* * Make a separate pass to clear references to this vap * held by DWDS entries. They will not be matched above * because ni_vap will point to the ap vap but we still * need to clear ni_wdsvap when the WDS vap is destroyed * and/or reset. */ TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) if (ni->ni_wdsvap == match) ni->ni_wdsvap = NULL; } IEEE80211_NODE_UNLOCK(nt); } static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt) { ieee80211_node_table_reset(nt, NULL); if (nt->nt_keyixmap != NULL) { #ifdef DIAGNOSTIC /* XXX verify all entries are NULL */ int i; for (i = 0; i < nt->nt_keyixmax; i++) if (nt->nt_keyixmap[i] != NULL) printf("%s: %s[%u] still active\n", __func__, nt->nt_name, i); #endif IEEE80211_FREE(nt->nt_keyixmap, M_80211_NODE); nt->nt_keyixmap = NULL; } IEEE80211_NODE_LOCK_DESTROY(nt); } static void timeout_stations(void *arg __unused, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; /* * Only process stations when in RUN state. This * insures, for example, that we don't timeout an * inactive station during CAC. Note that CSA state * is actually handled in ieee80211_node_timeout as * it applies to more than timeout processing. */ if (vap->iv_state != IEEE80211_S_RUN) return; /* * Ignore entries for which have yet to receive an * authentication frame. These are transient and * will be reclaimed when the last reference to them * goes away (when frame xmits complete). */ if ((vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_STA) && (ni->ni_flags & IEEE80211_NODE_AREF) == 0) return; /* * Free fragment if not needed anymore * (last fragment older than 1s). * XXX doesn't belong here, move to node_age */ if (ni->ni_rxfrag[0] != NULL && ticks > ni->ni_rxfragstamp + hz) { m_freem(ni->ni_rxfrag[0]); ni->ni_rxfrag[0] = NULL; } if (ni->ni_inact > 0) { ni->ni_inact--; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact %u inact_reload %u nrates %u", __func__, ni->ni_inact, ni->ni_inact_reload, ni->ni_rates.rs_nrates); } /* * Special case ourself; we may be idle for extended periods * of time and regardless reclaiming our state is wrong. * XXX run ic_node_age */ /* XXX before inact decrement? */ if (ni == vap->iv_bss) return; if (ni->ni_associd != 0 || (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_AHDEMO)) { /* * Age/drain resources held by the station. */ ic->ic_node_age(ni); /* * Probe the station before time it out. We * send a null data frame which may not be * universally supported by drivers (need it * for ps-poll support so it should be...). * * XXX don't probe the station unless we've * received a frame from them (and have * some idea of the rates they are capable * of); this will get fixed more properly * soon with better handling of the rate set. */ if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && (0 < ni->ni_inact && ni->ni_inact <= vap->iv_inact_probe) && ni->ni_rates.rs_nrates != 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, "%s", "probe station due to inactivity"); /* * Grab a reference so the node cannot * be reclaimed before we send the frame. * ieee80211_send_nulldata understands * we've done this and reclaims the * ref for us as needed. */ /* XXX fix this (not required anymore). */ ieee80211_ref_node(ni); /* XXX useless */ ieee80211_send_nulldata(ni); /* XXX stat? */ return; } } if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && ni->ni_inact <= 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, "station timed out due to inactivity " "(refcnt %u)", ieee80211_node_refcnt(ni)); /* * Send a deauthenticate frame and drop the station. * This is somewhat complicated due to reference counts * and locking. At this point a station will typically * have a reference count of 2. ieee80211_node_leave * will do a "free" of the node which will drop the * reference count. But in the meantime a reference * wil be held by the deauth frame. The actual reclaim * of the node will happen either after the tx is * completed or by ieee80211_node_leave. */ if (ni->ni_associd != 0) { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_AUTH_EXPIRE); } ieee80211_node_leave(ni); vap->iv_stats.is_node_timeout++; } } /* * Timeout inactive stations and do related housekeeping. */ static void ieee80211_timeout_stations(struct ieee80211com *ic) { struct ieee80211_node_table *nt = &ic->ic_sta; ieee80211_iterate_nodes(nt, timeout_stations, NULL); } /* * Aggressively reclaim resources. This should be used * only in a critical situation to reclaim mbuf resources. */ void ieee80211_drain(struct ieee80211com *ic) { struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211vap *vap; struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { /* * Ignore entries for which have yet to receive an * authentication frame. These are transient and * will be reclaimed when the last reference to them * goes away (when frame xmits complete). */ vap = ni->ni_vap; /* * Only process stations when in RUN state. This * insures, for example, that we don't timeout an * inactive station during CAC. Note that CSA state * is actually handled in ieee80211_node_timeout as * it applies to more than timeout processing. */ if (vap->iv_state != IEEE80211_S_RUN) continue; /* XXX can vap be NULL? */ if ((vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_STA) && (ni->ni_flags & IEEE80211_NODE_AREF) == 0) continue; /* * Free fragments. * XXX doesn't belong here, move to node_drain */ if (ni->ni_rxfrag[0] != NULL) { m_freem(ni->ni_rxfrag[0]); ni->ni_rxfrag[0] = NULL; } /* * Drain resources held by the station. */ ic->ic_node_drain(ni); } IEEE80211_NODE_UNLOCK(nt); } /* * Per-ieee80211vap inactivity timer callback. */ static void ieee80211_vap_timeout(struct ieee80211vap *vap) { IEEE80211_LOCK_ASSERT(vap->iv_ic); ieee80211_vap_erp_timeout(vap); ieee80211_ht_timeout(vap); ieee80211_vht_timeout(vap); } /* * Per-ieee80211com inactivity timer callback. */ void ieee80211_node_timeout(void *arg) { struct ieee80211com *ic = arg; struct ieee80211vap *vap; /* * Defer timeout processing if a channel switch is pending. * We typically need to be mute so not doing things that * might generate frames is good to handle in one place. * Suppressing the station timeout processing may extend the * lifetime of inactive stations (by not decrementing their * idle counters) but this should be ok unless the CSA is * active for an unusually long time. */ if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) { ieee80211_scan_timeout(ic); ieee80211_timeout_stations(ic); ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT); IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) ieee80211_vap_timeout(vap); IEEE80211_UNLOCK(ic); } callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); } /* * The same as ieee80211_iterate_nodes(), but for one vap only. */ int ieee80211_iterate_nodes_vap(struct ieee80211_node_table *nt, struct ieee80211vap *vap, ieee80211_iter_func *f, void *arg) { struct ieee80211_node **ni_arr; struct ieee80211_node *ni; size_t size; int count, i; /* * Iterate over the node table and save an array of ref'ed nodes. * * This is separated out from calling the actual node function so that * no LORs will occur. */ IEEE80211_NODE_LOCK(nt); count = nt->nt_count; size = count * sizeof(struct ieee80211_node *); ni_arr = (struct ieee80211_node **) IEEE80211_MALLOC(size, M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ni_arr == NULL) { IEEE80211_NODE_UNLOCK(nt); return (ENOMEM); } i = 0; TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { if (vap != NULL && ni->ni_vap != vap) continue; KASSERT(i < count, ("node array overflow (vap %p, i %d, count %d)\n", vap, i, count)); ni_arr[i] = ieee80211_ref_node(ni); i++; } IEEE80211_NODE_UNLOCK(nt); for (i = 0; i < count; i++) { if (ni_arr[i] == NULL) /* end of the list */ break; (*f)(arg, ni_arr[i]); /* ieee80211_free_node() locks by itself */ ieee80211_free_node(ni_arr[i]); } IEEE80211_FREE(ni_arr, M_80211_NODE); return (0); } /* * Just a wrapper, so we don't have to change every ieee80211_iterate_nodes() * reference in the source. */ void ieee80211_iterate_nodes(struct ieee80211_node_table *nt, ieee80211_iter_func *f, void *arg) { /* XXX no way to pass error to the caller. */ (void) ieee80211_iterate_nodes_vap(nt, NULL, f, arg); } void ieee80211_dump_node(struct ieee80211_node_table *nt __unused, struct ieee80211_node *ni) { printf("%p: mac %s refcnt %d\n", ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); printf("\tauthmode %u flags 0x%x\n", ni->ni_authmode, ni->ni_flags); printf("\tassocid 0x%x txpower %u vlan %u\n", ni->ni_associd, ni->ni_txpower, ni->ni_vlan); printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", ni->ni_txseqs[IEEE80211_NONQOS_TID], ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxfragstamp); printf("\trssi %d noise %d intval %u capinfo 0x%x\n", node_getrssi(ni), ni->ni_noise, ni->ni_intval, ni->ni_capinfo); printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n", ether_sprintf(ni->ni_bssid), ni->ni_esslen, ni->ni_essid, ni->ni_chan->ic_freq, ni->ni_chan->ic_flags); printf("\tinact %u inact_reload %u txrate %u\n", ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate); printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n", ni->ni_htcap, ni->ni_htparam, ni->ni_htctlchan, ni->ni_ht2ndchan); printf("\thtopmode %x htstbc %x htchw %u\n", ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw); printf("\tvhtcap %x freq1 %d freq2 %d vhtbasicmcs %x\n", ni->ni_vhtcap, (int) ni->ni_vht_chan1, (int) ni->ni_vht_chan2, (int) ni->ni_vht_basicmcs); /* XXX VHT state */ } void ieee80211_dump_nodes(struct ieee80211_node_table *nt) { ieee80211_iterate_nodes(nt, (ieee80211_iter_func *) ieee80211_dump_node, nt); } /* * Iterate over the VAPs and update their ERP beacon IEs. * * Note this must be called from the deferred ERP update task paths. */ void ieee80211_notify_erp_locked(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_opmode == IEEE80211_M_HOSTAP) ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP); } /* * Handle a station joining an 11g network. */ static void ieee80211_node_join_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; IEEE80211_LOCK_ASSERT(ic); /* * Station isn't capable of short slot time. Bump * the count of long slot time stations and disable * use of short slot time. Note that the actual switch * over to long slot time use may not occur until the * next beacon transmission (per sec. 7.3.1.4 of 11g). */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { vap->iv_longslotsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station needs long slot time, count %d", vap->iv_longslotsta); /* * XXX TODO: this may need all VAPs checked! */ if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) { /* * Don't force slot time when switched to turbo * mode as non-ERP stations won't be present; this * need only be done when on the normal G channel. */ ieee80211_vap_set_shortslottime(vap, 0); } } /* * If the new station is not an ERP station * then bump the counter and enable protection * if configured. */ if (!ieee80211_iserp_rateset(&ni->ni_rates)) { vap->iv_nonerpsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station is !ERP, %d non-ERP stations associated", vap->iv_nonerpsta); /* * If station does not support short preamble * then we must enable use of Barker preamble. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "%s", "station needs long preamble"); vap->iv_flags |= IEEE80211_F_USEBARKER; vap->iv_flags &= ~IEEE80211_F_SHPREAMBLE; ieee80211_vap_update_preamble(vap); } /* * If protection is configured and this is the first * indication we should use protection, enable it. */ if (vap->iv_protmode != IEEE80211_PROT_NONE && vap->iv_nonerpsta == 1 && (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: enable use of protection\n", __func__); vap->iv_flags |= IEEE80211_F_USEPROT; ieee80211_vap_update_erp_protmode(vap); } } else ni->ni_flags |= IEEE80211_NODE_ERP; } void ieee80211_node_join(struct ieee80211_node *ni, int resp) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; int newassoc; if (ni->ni_associd == 0) { uint16_t aid; KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap")); /* * It would be good to search the bitmap * more efficiently, but this will do for now. */ for (aid = 1; aid < vap->iv_max_aid; aid++) { if (!IEEE80211_AID_ISSET(vap, aid)) break; } if (aid >= vap->iv_max_aid) { IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY); ieee80211_node_leave(ni); return; } ni->ni_associd = aid | 0xc000; ni->ni_jointime = time_uptime; IEEE80211_LOCK(ic); IEEE80211_AID_SET(vap, ni->ni_associd); vap->iv_sta_assoc++; if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_join(ni); if (IEEE80211_IS_CHAN_VHT(ic->ic_bsschan)) ieee80211_vht_node_join(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_join_11g(ni); IEEE80211_UNLOCK(ic); newassoc = 1; } else newassoc = 0; /* * XXX VHT - should log VHT channel width, etc */ IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s%s", IEEE80211_NODE_AID(ni), vap->iv_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long", vap->iv_flags & IEEE80211_F_SHSLOT ? "short" : "long", vap->iv_flags & IEEE80211_F_USEPROT ? ", protection" : "", ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "", /* XXX update for VHT string */ ni->ni_flags & IEEE80211_NODE_HT ? (ni->ni_chw == 40 ? ", HT40" : ", HT20") : "", ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "", ni->ni_flags & IEEE80211_NODE_AMSDU ? " (+AMSDU)" : "", ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" : ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "", ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ? ", fast-frames" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ? ", turbo" : "" ); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); /* give driver a chance to setup state like ni_txrate */ if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, newassoc); IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS); /* tell the authenticator about new station */ if (vap->iv_auth->ia_node_join != NULL) vap->iv_auth->ia_node_join(ni); ieee80211_notify_node_join(ni, resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP); } static void disable_protection(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; KASSERT(vap->iv_nonerpsta == 0 && (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0, ("%d non ERP stations, flags 0x%x", vap->iv_nonerpsta, vap->iv_flags_ext)); vap->iv_flags &= ~IEEE80211_F_USEPROT; /* XXX verify mode? */ if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) { vap->iv_flags |= IEEE80211_F_SHPREAMBLE; vap->iv_flags &= ~IEEE80211_F_USEBARKER; } ieee80211_vap_update_erp_protmode(vap); ieee80211_vap_update_preamble(vap); } /* * Handle a station leaving an 11g network. */ static void ieee80211_node_leave_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; IEEE80211_LOCK_ASSERT(ic); KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan), ("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq, ic->ic_bsschan->ic_flags)); /* * If a long slot station do the slot time bookkeeping. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { KASSERT(vap->iv_longslotsta > 0, ("bogus long slot station count %d", vap->iv_longslotsta)); vap->iv_longslotsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "long slot time station leaves, count now %d", vap->iv_longslotsta); /* * XXX TODO: this may need all VAPs checked! */ if (vap->iv_longslotsta == 0) { /* * Re-enable use of short slot time if supported * and not operating in IBSS mode (per spec). */ if ((ic->ic_caps & IEEE80211_C_SHSLOT) && ic->ic_opmode != IEEE80211_M_IBSS) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: re-enable use of short slot time\n", __func__); ieee80211_vap_set_shortslottime(vap, 1); } } } /* * If a non-ERP station do the protection-related bookkeeping. */ if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) { KASSERT(vap->iv_nonerpsta > 0, ("bogus non-ERP station count %d", vap->iv_nonerpsta)); vap->iv_nonerpsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "non-ERP station leaves, count now %d%s", vap->iv_nonerpsta, (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) ? " (non-ERP sta present)" : ""); if (vap->iv_nonerpsta == 0 && (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: disable use of protection\n", __func__); disable_protection(vap); } } } /* * Time out presence of an overlapping bss with non-ERP * stations. When operating in hostap mode we listen for * beacons from other stations and if we identify a non-ERP * station is present we enable protection. To identify * when all non-ERP stations are gone we time out this * condition. */ static void ieee80211_vap_erp_timeout(struct ieee80211vap *vap) { IEEE80211_LOCK_ASSERT(vap->iv_ic); if ((vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) && ieee80211_time_after(ticks, vap->iv_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s", "age out non-ERP sta present on channel"); vap->iv_flags_ext &= ~IEEE80211_FEXT_NONERP_PR; if (vap->iv_nonerpsta == 0) disable_protection(vap); } } /* * Handle bookkeeping for station deauthentication/disassociation * when operating as an ap. */ void ieee80211_node_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_node_table *nt = ni->ni_table; IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station with aid %d leaves", IEEE80211_NODE_AID(ni)); KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("unexpected operating mode %u", vap->iv_opmode)); /* * If node wasn't previously associated all * we need to do is reclaim the reference. */ /* XXX ibss mode bypasses 11g and notification */ if (ni->ni_associd == 0) goto done; /* * Tell the authenticator the station is leaving. * Note that we must do this before yanking the * association id as the authenticator uses the * associd to locate it's state block. */ if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); IEEE80211_LOCK(ic); IEEE80211_AID_CLR(vap, ni->ni_associd); vap->iv_sta_assoc--; if (IEEE80211_IS_CHAN_VHT(ic->ic_bsschan)) ieee80211_vht_node_leave(ni); if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_leave(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_leave_11g(ni); IEEE80211_UNLOCK(ic); /* * Cleanup station state. In particular clear various * state that might otherwise be reused if the node * is reused before the reference count goes to zero * (and memory is reclaimed). */ ieee80211_sta_leave(ni); done: /* * Remove the node from any table it's recorded in and * drop the caller's reference. Removal from the table * is important to insure the node is not reprocessed * for inactivity. */ if (nt != NULL) { IEEE80211_NODE_LOCK(nt); node_reclaim(nt, ni); IEEE80211_NODE_UNLOCK(nt); } else ieee80211_free_node(ni); } struct rssiinfo { int rssi_samples; uint32_t rssi_total; }; static void get_hostap_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; /* only associated stations */ if (ni->ni_associd == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } static void get_adhoc_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; /* only neighbors */ /* XXX check bssid */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #ifdef IEEE80211_SUPPORT_MESH static void get_mesh_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; /* only neighbors that peered successfully */ if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #endif /* IEEE80211_SUPPORT_MESH */ int8_t ieee80211_getrssi(struct ieee80211vap *vap) { #define NZ(x) ((x) == 0 ? 1 : (x)) struct ieee80211com *ic = vap->iv_ic; struct rssiinfo info; info.rssi_total = 0; info.rssi_samples = 0; switch (vap->iv_opmode) { case IEEE80211_M_IBSS: /* average of all ibss neighbors */ case IEEE80211_M_AHDEMO: /* average of all neighbors */ ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_adhoc_rssi, &info); break; case IEEE80211_M_HOSTAP: /* average of all associated stations */ ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_hostap_rssi, &info); break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_M_MBSS: /* average of all mesh neighbors */ ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_mesh_rssi, &info); break; #endif case IEEE80211_M_MONITOR: /* XXX */ case IEEE80211_M_STA: /* use stats from associated ap */ default: if (vap->iv_bss != NULL) info.rssi_total = ic->ic_node_getrssi(vap->iv_bss); info.rssi_samples = 1; break; } return info.rssi_total / NZ(info.rssi_samples); #undef NZ } void ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise) { if (vap->iv_bss == NULL) /* NB: shouldn't happen */ return; vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise); /* for non-station mode return avg'd rssi accounting */ if (vap->iv_opmode != IEEE80211_M_STA) *rssi = ieee80211_getrssi(vap); } diff --git a/sys/net80211/ieee80211_node.h b/sys/net80211/ieee80211_node.h index 0e885440687c..2d237c3d597f 100644 --- a/sys/net80211/ieee80211_node.h +++ b/sys/net80211/ieee80211_node.h @@ -1,502 +1,485 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_NODE_H_ #define _NET80211_IEEE80211_NODE_H_ #include /* for ieee80211_nodestats */ #include /* for aggregation state */ /* * Each ieee80211com instance has a single timer that fires every * IEEE80211_INACT_WAIT seconds to handle "inactivity processing". * This is used to do node inactivity processing when operating * as an AP, adhoc or mesh mode. For inactivity processing each node * has a timeout set in its ni_inact field that is decremented * on each timeout and the node is reclaimed when the counter goes * to zero. We use different inactivity timeout values depending * on whether the node is associated and authorized (either by * 802.1x or open/shared key authentication) or associated but yet * to be authorized. The latter timeout is shorter to more aggressively * reclaim nodes that leave part way through the 802.1x exchange. */ #define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */ #define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */ #define IEEE80211_INACT_AUTH (180/IEEE80211_INACT_WAIT) /* associated but not authorized */ #define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */ #define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */ #define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */ #define IEEE80211_TRANS_WAIT 2 /* mgt frame tx timer (secs) */ /* threshold for aging overlapping non-ERP bss */ #define IEEE80211_NONERP_PRESENT_AGE msecs_to_ticks(60*1000) #define IEEE80211_NODE_HASHSIZE 32 /* NB: hash size must be pow2 */ /* simple hash is enough for variation of macaddr */ #define IEEE80211_NODE_HASH(ic, addr) \ (((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \ IEEE80211_NODE_HASHSIZE) struct ieee80211_node_table; struct ieee80211com; struct ieee80211vap; struct ieee80211_scanparams; /* * Information element (IE) ``blob''. We use this structure * to capture management frame payloads that need to be * retained. Information elements within the payload that * we need to consult have references recorded. */ struct ieee80211_ies { /* the following are either NULL or point within data */ uint8_t *wpa_ie; /* captured WPA ie */ uint8_t *rsn_ie; /* captured RSN ie */ uint8_t *wme_ie; /* captured WME ie */ uint8_t *ath_ie; /* captured Atheros ie */ uint8_t *htcap_ie; /* captured HTCAP ie */ uint8_t *htinfo_ie; /* captured HTINFO ie */ uint8_t *tdma_ie; /* captured TDMA ie */ uint8_t *meshid_ie; /* captured MESH ID ie */ uint8_t *vhtcap_ie; /* captured VHTCAP ie */ uint8_t *vhtopmode_ie; /* captured VHTOPMODE ie */ uint8_t *vhtpwrenv_ie; /* captured VHTPWRENV ie */ uint8_t *apchanrep_ie; /* captured APCHANREP ie */ uint8_t *bssload_ie; /* captured BSSLOAD ie */ uint8_t *spare[4]; /* NB: these must be the last members of this structure */ uint8_t *data; /* frame data > 802.11 header */ int len; /* data size in bytes */ }; /* * 802.11s (Mesh) Peer Link FSM state. */ enum ieee80211_mesh_mlstate { IEEE80211_NODE_MESH_IDLE = 0, IEEE80211_NODE_MESH_OPENSNT = 1, /* open frame sent */ IEEE80211_NODE_MESH_OPENRCV = 2, /* open frame received */ IEEE80211_NODE_MESH_CONFIRMRCV = 3, /* confirm frame received */ IEEE80211_NODE_MESH_ESTABLISHED = 4, /* link established */ IEEE80211_NODE_MESH_HOLDING = 5, /* link closing */ }; #define IEEE80211_MESH_MLSTATE_BITS \ "\20\1IDLE\2OPENSNT\2OPENRCV\3CONFIRMRCV\4ESTABLISHED\5HOLDING" /* * Node specific information. Note that drivers are expected * to derive from this structure to add device-specific per-node * state. This is done by overriding the ic_node_* methods in * the ieee80211com structure. */ struct ieee80211_node { struct ieee80211vap *ni_vap; /* associated vap */ struct ieee80211com *ni_ic; /* copy from vap to save deref*/ struct ieee80211_node_table *ni_table; /* NB: may be NULL */ TAILQ_ENTRY(ieee80211_node) ni_list; /* list of all nodes */ LIST_ENTRY(ieee80211_node) ni_hash; /* hash collision list */ u_int ni_refcnt; /* count of held references */ u_int ni_flags; #define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */ #define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */ #define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */ /* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */ #define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */ #define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */ #define IEEE80211_NODE_HT 0x000040 /* HT enabled */ #define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */ #define IEEE80211_NODE_WPS 0x000100 /* WPS association */ #define IEEE80211_NODE_TSN 0x000200 /* TSN association */ #define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */ #define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */ #define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */ #define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */ #define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */ #define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */ #define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */ #define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */ #define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */ #define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */ #define IEEE80211_NODE_VHT 0x100000 /* VHT enabled */ #define IEEE80211_NODE_LDPC 0x200000 /* LDPC enabled */ #define IEEE80211_NODE_UAPSD 0x400000 /* U-APSD power save enabled */ uint16_t ni_associd; /* association ID */ uint16_t ni_vlan; /* vlan tag */ uint16_t ni_txpower; /* current transmit power */ uint8_t ni_authmode; /* authentication algorithm */ uint8_t ni_ath_flags; /* Atheros feature flags */ /* NB: These must have the same values as IEEE80211_ATHC_* */ #define IEEE80211_NODE_TURBOP 0x0001 /* Turbo prime enable */ #define IEEE80211_NODE_COMP 0x0002 /* Compresssion enable */ #define IEEE80211_NODE_FF 0x0004 /* Fast Frame capable */ #define IEEE80211_NODE_XR 0x0008 /* Atheros WME enable */ #define IEEE80211_NODE_AR 0x0010 /* AR capable */ #define IEEE80211_NODE_BOOST 0x0080 /* Dynamic Turbo boosted */ uint16_t ni_ath_defkeyix;/* Atheros def key index */ const struct ieee80211_txparam *ni_txparms; uint32_t ni_jointime; /* time of join (secs) */ uint32_t *ni_challenge; /* shared-key challenge */ struct ieee80211_ies ni_ies; /* captured ie's */ /* tx seq per-tid */ ieee80211_seq ni_txseqs[IEEE80211_TID_SIZE]; /* rx seq previous per-tid*/ ieee80211_seq ni_rxseqs[IEEE80211_TID_SIZE]; uint32_t ni_rxfragstamp; /* time stamp of last rx frag */ struct mbuf *ni_rxfrag[3]; /* rx frag reassembly */ struct ieee80211_key ni_ucastkey; /* unicast key */ /* hardware */ uint32_t ni_avgrssi; /* recv ssi state */ int8_t ni_noise; /* noise floor */ /* mimo statistics */ uint32_t ni_mimo_rssi_ctl[IEEE80211_MAX_CHAINS]; uint32_t ni_mimo_rssi_ext[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_noise_ctl[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_noise_ext[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_chains; /* header */ uint8_t ni_macaddr[IEEE80211_ADDR_LEN]; uint8_t ni_bssid[IEEE80211_ADDR_LEN]; /* beacon, probe response */ union { uint8_t data[8]; u_int64_t tsf; } ni_tstamp; /* from last rcv'd beacon */ uint16_t ni_intval; /* beacon interval */ uint16_t ni_capinfo; /* capabilities */ uint8_t ni_esslen; uint8_t ni_essid[IEEE80211_NWID_LEN]; struct ieee80211_rateset ni_rates; /* negotiated rate set */ struct ieee80211_channel *ni_chan; uint16_t ni_fhdwell; /* FH only */ uint8_t ni_fhindex; /* FH only */ uint16_t ni_erp; /* ERP from beacon/probe resp */ uint16_t ni_timoff; /* byte offset to TIM ie */ uint8_t ni_dtim_period; /* DTIM period */ uint8_t ni_dtim_count; /* DTIM count for last bcn */ /* 11s state */ uint8_t ni_meshidlen; uint8_t ni_meshid[IEEE80211_MESHID_LEN]; enum ieee80211_mesh_mlstate ni_mlstate; /* peering management state */ uint16_t ni_mllid; /* link local ID */ uint16_t ni_mlpid; /* link peer ID */ struct callout ni_mltimer; /* link mesh timer */ uint8_t ni_mlrcnt; /* link mesh retry counter */ uint8_t ni_mltval; /* link mesh timer value */ struct callout ni_mlhtimer; /* link mesh backoff timer */ uint8_t ni_mlhcnt; /* link mesh holding counter */ /* 11n state */ uint16_t ni_htcap; /* HT capabilities */ uint8_t ni_htparam; /* HT params */ uint8_t ni_htctlchan; /* HT control channel */ uint8_t ni_ht2ndchan; /* HT 2nd channel */ uint8_t ni_htopmode; /* HT operating mode */ uint8_t ni_htstbc; /* HT */ uint8_t ni_chw; /* negotiated channel width */ struct ieee80211_htrateset ni_htrates; /* negotiated ht rate set */ struct ieee80211_tx_ampdu ni_tx_ampdu[WME_NUM_TID]; struct ieee80211_rx_ampdu ni_rx_ampdu[WME_NUM_TID]; /* VHT state */ uint32_t ni_vhtcap; uint16_t ni_vht_basicmcs; uint16_t ni_vht_pad2; struct ieee80211_vht_mcs_info ni_vht_mcsinfo; uint8_t ni_vht_chan1; /* 20/40/80/160 - VHT chan1 */ uint8_t ni_vht_chan2; /* 80+80 - VHT chan2 */ uint8_t ni_vht_chanwidth; /* IEEE80211_VHT_CHANWIDTH_ */ uint8_t ni_vht_pad1; uint32_t ni_vht_spare[8]; /* fast-frames state */ struct mbuf * ni_tx_superg[WME_NUM_TID]; /* others */ short ni_inact; /* inactivity mark count */ short ni_inact_reload;/* inactivity reload value */ int ni_txrate; /* legacy rate/MCS */ struct ieee80211_psq ni_psq; /* power save queue */ struct ieee80211_nodestats ni_stats; /* per-node statistics */ struct ieee80211vap *ni_wdsvap; /* associated WDS vap */ void *ni_rctls; /* private ratectl state */ /* quiet time IE state for the given node */ uint32_t ni_quiet_ie_set; /* Quiet time IE was seen */ struct ieee80211_quiet_ie ni_quiet_ie; /* last seen quiet IE */ /* U-APSD */ uint8_t ni_uapsd; /* U-APSD per-node flags matching WMM STA QoS Info field */ void *ni_drv_data; /* driver specific */ uint64_t ni_spare[3]; }; MALLOC_DECLARE(M_80211_NODE); MALLOC_DECLARE(M_80211_NODE_IE); #define IEEE80211_NODE_ATH (IEEE80211_NODE_FF | IEEE80211_NODE_TURBOP) #define IEEE80211_NODE_AMPDU \ (IEEE80211_NODE_AMPDU_RX | IEEE80211_NODE_AMPDU_TX) #define IEEE80211_NODE_AMSDU \ (IEEE80211_NODE_AMSDU_RX | IEEE80211_NODE_AMSDU_TX) #define IEEE80211_NODE_HT_ALL \ (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT | \ IEEE80211_NODE_AMPDU | IEEE80211_NODE_AMSDU | \ IEEE80211_NODE_MIMO_PS | IEEE80211_NODE_MIMO_RTS | \ IEEE80211_NODE_RIFS | IEEE80211_NODE_SGI20 | IEEE80211_NODE_SGI40) #define IEEE80211_NODE_BITS \ "\20\1AUTH\2QOS\3ERP\5PWR_MGT\6AREF\7HT\10HTCOMPAT\11WPS\12TSN" \ "\13AMPDU_RX\14AMPDU_TX\15MIMO_PS\16MIMO_RTS\17RIFS\20SGI20\21SGI40" \ "\22ASSOCID" #define IEEE80211_NODE_AID(ni) IEEE80211_AID(ni->ni_associd) #define IEEE80211_NODE_STAT(ni,stat) (ni->ni_stats.ns_##stat++) #define IEEE80211_NODE_STAT_ADD(ni,stat,v) (ni->ni_stats.ns_##stat += v) #define IEEE80211_NODE_STAT_SET(ni,stat,v) (ni->ni_stats.ns_##stat = v) /* * Filtered rssi calculation support. The receive rssi is maintained * as an average over the last 10 frames received using a low pass filter * (all frames for now, possibly need to be more selective). Calculations * are designed such that a good compiler can optimize them. The avg * rssi state should be initialized to IEEE80211_RSSI_DUMMY_MARKER and * each sample incorporated with IEEE80211_RSSI_LPF. Use IEEE80211_RSSI_GET * to extract the current value. * * Note that we assume rssi data are in the range [-127..127] and we * discard values <-20. This is consistent with assumptions throughout * net80211 that signal strength data are in .5 dBm units relative to * the current noise floor (linear, not log). */ #define IEEE80211_RSSI_LPF_LEN 10 #define IEEE80211_RSSI_DUMMY_MARKER 127 /* NB: pow2 to optimize out * and / */ #define IEEE80211_RSSI_EP_MULTIPLIER (1<<7) #define IEEE80211_RSSI_IN(x) ((x) * IEEE80211_RSSI_EP_MULTIPLIER) #define _IEEE80211_RSSI_LPF(x, y, len) \ (((x) != IEEE80211_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y)) #define IEEE80211_RSSI_LPF(x, y) do { \ if ((y) >= -20) { \ x = _IEEE80211_RSSI_LPF((x), IEEE80211_RSSI_IN((y)), \ IEEE80211_RSSI_LPF_LEN); \ } \ } while (0) #define IEEE80211_RSSI_EP_RND(x, mul) \ ((((x) % (mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) #define IEEE80211_RSSI_GET(x) \ IEEE80211_RSSI_EP_RND(x, IEEE80211_RSSI_EP_MULTIPLIER) static __inline struct ieee80211_node * ieee80211_ref_node(struct ieee80211_node *ni) { ieee80211_node_incref(ni); return ni; } static __inline void ieee80211_unref_node(struct ieee80211_node **ni) { ieee80211_node_decref(*ni); *ni = NULL; /* guard against use */ } void ieee80211_node_attach(struct ieee80211com *); void ieee80211_node_lateattach(struct ieee80211com *); void ieee80211_node_detach(struct ieee80211com *); void ieee80211_node_vattach(struct ieee80211vap *); void ieee80211_node_latevattach(struct ieee80211vap *); void ieee80211_node_vdetach(struct ieee80211vap *); static __inline int ieee80211_node_is_authorized(const struct ieee80211_node *ni) { return (ni->ni_flags & IEEE80211_NODE_AUTH); } void ieee80211_node_authorize(struct ieee80211_node *); void ieee80211_node_unauthorize(struct ieee80211_node *); void ieee80211_node_setuptxparms(struct ieee80211_node *); void ieee80211_node_set_chan(struct ieee80211_node *, struct ieee80211_channel *); void ieee80211_create_ibss(struct ieee80211vap*, struct ieee80211_channel *); void ieee80211_reset_bss(struct ieee80211vap *); void ieee80211_sync_curchan(struct ieee80211com *); void ieee80211_setupcurchan(struct ieee80211com *, struct ieee80211_channel *); void ieee80211_setcurchan(struct ieee80211com *, struct ieee80211_channel *); void ieee80211_update_chw(struct ieee80211com *); int ieee80211_ibss_merge_check(struct ieee80211_node *); int ieee80211_ibss_node_check_new(struct ieee80211_node *ni, const struct ieee80211_scanparams *); int ieee80211_ibss_merge(struct ieee80211_node *); struct ieee80211_scan_entry; int ieee80211_sta_join(struct ieee80211vap *, struct ieee80211_channel *, const struct ieee80211_scan_entry *); void ieee80211_sta_leave(struct ieee80211_node *); void ieee80211_node_deauth(struct ieee80211_node *, int); int ieee80211_ies_init(struct ieee80211_ies *, const uint8_t *, int); void ieee80211_ies_cleanup(struct ieee80211_ies *); void ieee80211_ies_expand(struct ieee80211_ies *); #define ieee80211_ies_setie(_ies, _ie, _off) do { \ (_ies)._ie = (_ies).data + (_off); \ } while (0) /* * Table of ieee80211_node instances. Each ieee80211com * has one that holds association stations (when operating * as an ap) or neighbors (in ibss mode). * * XXX embed this in ieee80211com instead of indirect? */ struct ieee80211_node_table { struct ieee80211com *nt_ic; /* back reference */ ieee80211_node_lock_t nt_nodelock; /* on node table */ TAILQ_HEAD(, ieee80211_node) nt_node; /* information of all nodes */ LIST_HEAD(, ieee80211_node) nt_hash[IEEE80211_NODE_HASHSIZE]; int nt_count; /* number of nodes */ struct ieee80211_node **nt_keyixmap; /* key ix -> node map */ int nt_keyixmax; /* keyixmap size */ const char *nt_name; /* table name for debug msgs */ int nt_inact_init; /* initial node inact setting */ }; struct ieee80211_node *ieee80211_alloc_node(struct ieee80211_node_table *, struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_tmp_node(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_dup_bss(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_node_create_wds(struct ieee80211vap *, const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *); -#ifdef IEEE80211_DEBUG_REFCNT -void ieee80211_free_node_debug(struct ieee80211_node *, + +/* These functions are taking __func__, __LINE__ for IEEE80211_DEBUG_REFCNT */ +void _ieee80211_free_node(struct ieee80211_node *, const char *func, int line); -struct ieee80211_node *ieee80211_find_node_locked_debug( +struct ieee80211_node *_ieee80211_find_node_locked( struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); -struct ieee80211_node *ieee80211_find_node_debug(struct ieee80211_node_table *, +struct ieee80211_node *_ieee80211_find_node(struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); -struct ieee80211_node *ieee80211_find_vap_node_locked_debug( +struct ieee80211_node *_ieee80211_find_vap_node_locked( struct ieee80211_node_table *, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); -struct ieee80211_node *ieee80211_find_vap_node_debug( +struct ieee80211_node *_ieee80211_find_vap_node( struct ieee80211_node_table *, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); -struct ieee80211_node * ieee80211_find_rxnode_debug(struct ieee80211com *, +struct ieee80211_node *_ieee80211_find_rxnode(struct ieee80211com *, const struct ieee80211_frame_min *, const char *func, int line); -struct ieee80211_node * ieee80211_find_rxnode_withkey_debug( +struct ieee80211_node *_ieee80211_find_rxnode_withkey( struct ieee80211com *, const struct ieee80211_frame_min *, uint16_t keyix, const char *func, int line); -struct ieee80211_node *ieee80211_find_txnode_debug(struct ieee80211vap *, +struct ieee80211_node *_ieee80211_find_txnode(struct ieee80211vap *, const uint8_t *, const char *func, int line); #define ieee80211_free_node(ni) \ - ieee80211_free_node_debug(ni, __func__, __LINE__) + _ieee80211_free_node(ni, __func__, __LINE__) #define ieee80211_find_node_locked(nt, mac) \ - ieee80211_find_node_locked_debug(nt, mac, __func__, __LINE__) + _ieee80211_find_node_locked(nt, mac, __func__, __LINE__) #define ieee80211_find_node(nt, mac) \ - ieee80211_find_node_debug(nt, mac, __func__, __LINE__) + _ieee80211_find_node(nt, mac, __func__, __LINE__) #define ieee80211_find_vap_node_locked(nt, vap, mac) \ - ieee80211_find_vap_node_locked_debug(nt, vap, mac, __func__, __LINE__) + _ieee80211_find_vap_node_locked(nt, vap, mac, __func__, __LINE__) #define ieee80211_find_vap_node(nt, vap, mac) \ - ieee80211_find_vap_node_debug(nt, vap, mac, __func__, __LINE__) + _ieee80211_find_vap_node(nt, vap, mac, __func__, __LINE__) #define ieee80211_find_rxnode(ic, wh) \ - ieee80211_find_rxnode_debug(ic, wh, __func__, __LINE__) + _ieee80211_find_rxnode(ic, wh, __func__, __LINE__) #define ieee80211_find_rxnode_withkey(ic, wh, keyix) \ - ieee80211_find_rxnode_withkey_debug(ic, wh, keyix, __func__, __LINE__) + _ieee80211_find_rxnode_withkey(ic, wh, keyix, __func__, __LINE__) #define ieee80211_find_txnode(vap, mac) \ - ieee80211_find_txnode_debug(vap, mac, __func__, __LINE__) -#else -void ieee80211_free_node(struct ieee80211_node *); -struct ieee80211_node *ieee80211_find_node_locked(struct ieee80211_node_table *, - const uint8_t macaddr[IEEE80211_ADDR_LEN]); -struct ieee80211_node *ieee80211_find_node(struct ieee80211_node_table *, - const uint8_t macaddr[IEEE80211_ADDR_LEN]); -struct ieee80211_node *ieee80211_find_vap_node_locked( - struct ieee80211_node_table *, const struct ieee80211vap *, - const uint8_t macaddr[IEEE80211_ADDR_LEN]); -struct ieee80211_node *ieee80211_find_vap_node( - struct ieee80211_node_table *, const struct ieee80211vap *, - const uint8_t macaddr[IEEE80211_ADDR_LEN]); -struct ieee80211_node * ieee80211_find_rxnode(struct ieee80211com *, - const struct ieee80211_frame_min *); -struct ieee80211_node * ieee80211_find_rxnode_withkey(struct ieee80211com *, - const struct ieee80211_frame_min *, uint16_t keyix); -struct ieee80211_node *ieee80211_find_txnode(struct ieee80211vap *, - const uint8_t macaddr[IEEE80211_ADDR_LEN]); -#endif + _ieee80211_find_txnode(vap, mac, __func__, __LINE__) + int ieee80211_node_delucastkey(struct ieee80211_node *); void ieee80211_node_timeout(void *arg); typedef void ieee80211_iter_func(void *, struct ieee80211_node *); int ieee80211_iterate_nodes_vap(struct ieee80211_node_table *, struct ieee80211vap *, ieee80211_iter_func *, void *); void ieee80211_iterate_nodes(struct ieee80211_node_table *, ieee80211_iter_func *, void *); void ieee80211_notify_erp_locked(struct ieee80211com *); void ieee80211_dump_node(struct ieee80211_node_table *, struct ieee80211_node *); void ieee80211_dump_nodes(struct ieee80211_node_table *); struct ieee80211_node *ieee80211_fakeup_adhoc_node(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_scanparams; void ieee80211_init_neighbor(struct ieee80211_node *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); struct ieee80211_node *ieee80211_add_neighbor(struct ieee80211vap *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); void ieee80211_node_join(struct ieee80211_node *,int); void ieee80211_node_leave(struct ieee80211_node *); int8_t ieee80211_getrssi(struct ieee80211vap *); void ieee80211_getsignal(struct ieee80211vap *, int8_t *, int8_t *); #endif /* _NET80211_IEEE80211_NODE_H_ */