diff --git a/cmd/zpool/os/linux/zpool_vdev_os.c b/cmd/zpool/os/linux/zpool_vdev_os.c index 80627b58211c..f194d28c55a9 100644 --- a/cmd/zpool/os/linux/zpool_vdev_os.c +++ b/cmd/zpool/os/linux/zpool_vdev_os.c @@ -1,673 +1,673 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2013, 2018 by Delphix. All rights reserved. * Copyright (c) 2016, 2017 Intel Corporation. * Copyright 2016 Igor Kozhukhov . */ /* * Functions to convert between a list of vdevs and an nvlist representing the * configuration. Each entry in the list can be one of: * * Device vdevs * disk=(path=..., devid=...) * file=(path=...) * * Group vdevs * raidz[1|2]=(...) * mirror=(...) * * Hot spares * * While the underlying implementation supports it, group vdevs cannot contain * other group vdevs. All userland verification of devices is contained within * this file. If successful, the nvlist returned can be passed directly to the * kernel; we've done as much verification as possible in userland. * * Hot spares are a special case, and passed down as an array of disk vdevs, at * the same level as the root of the vdev tree. * * The only function exported by this file is 'make_root_vdev'. The * function performs several passes: * * 1. Construct the vdev specification. Performs syntax validation and * makes sure each device is valid. * 2. Check for devices in use. Using libblkid to make sure that no * devices are also in use. Some can be overridden using the 'force' * flag, others cannot. * 3. Check for replication errors if the 'force' flag is not specified. * validates that the replication level is consistent across the * entire pool. * 4. Call libzfs to label any whole disks with an EFI label. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "zpool_util.h" #include #include #include #include #include #include #include #include typedef struct vdev_disk_db_entry { char id[24]; int sector_size; } vdev_disk_db_entry_t; /* * Database of block devices that lie about physical sector sizes. The * identification string must be precisely 24 characters to avoid false * negatives */ static vdev_disk_db_entry_t vdev_disk_database[] = { {"ATA ADATA SSD S396 3", 8192}, {"ATA APPLE SSD SM128E", 8192}, {"ATA APPLE SSD SM256E", 8192}, {"ATA APPLE SSD SM512E", 8192}, {"ATA APPLE SSD SM768E", 8192}, {"ATA C400-MTFDDAC064M", 8192}, {"ATA C400-MTFDDAC128M", 8192}, {"ATA C400-MTFDDAC256M", 8192}, {"ATA C400-MTFDDAC512M", 8192}, {"ATA Corsair Force 3 ", 8192}, {"ATA Corsair Force GS", 8192}, {"ATA INTEL SSDSA2CT04", 8192}, {"ATA INTEL SSDSA2BZ10", 8192}, {"ATA INTEL SSDSA2BZ20", 8192}, {"ATA INTEL SSDSA2BZ30", 8192}, {"ATA INTEL SSDSA2CW04", 8192}, {"ATA INTEL SSDSA2CW08", 8192}, {"ATA INTEL SSDSA2CW12", 8192}, {"ATA INTEL SSDSA2CW16", 8192}, {"ATA INTEL SSDSA2CW30", 8192}, {"ATA INTEL SSDSA2CW60", 8192}, {"ATA INTEL SSDSC2CT06", 8192}, {"ATA INTEL SSDSC2CT12", 8192}, {"ATA INTEL SSDSC2CT18", 8192}, {"ATA INTEL SSDSC2CT24", 8192}, {"ATA INTEL SSDSC2CW06", 8192}, {"ATA INTEL SSDSC2CW12", 8192}, {"ATA INTEL SSDSC2CW18", 8192}, {"ATA INTEL SSDSC2CW24", 8192}, {"ATA INTEL SSDSC2CW48", 8192}, {"ATA KINGSTON SH100S3", 8192}, {"ATA KINGSTON SH103S3", 8192}, {"ATA M4-CT064M4SSD2 ", 8192}, {"ATA M4-CT128M4SSD2 ", 8192}, {"ATA M4-CT256M4SSD2 ", 8192}, {"ATA M4-CT512M4SSD2 ", 8192}, {"ATA OCZ-AGILITY2 ", 8192}, {"ATA OCZ-AGILITY3 ", 8192}, {"ATA OCZ-VERTEX2 3.5 ", 8192}, {"ATA OCZ-VERTEX3 ", 8192}, {"ATA OCZ-VERTEX3 LT ", 8192}, {"ATA OCZ-VERTEX3 MI ", 8192}, {"ATA OCZ-VERTEX4 ", 8192}, {"ATA SAMSUNG MZ7WD120", 8192}, {"ATA SAMSUNG MZ7WD240", 8192}, {"ATA SAMSUNG MZ7WD480", 8192}, {"ATA SAMSUNG MZ7WD960", 8192}, {"ATA SAMSUNG SSD 830 ", 8192}, {"ATA Samsung SSD 840 ", 8192}, {"ATA SanDisk SSD U100", 8192}, {"ATA TOSHIBA THNSNH06", 8192}, {"ATA TOSHIBA THNSNH12", 8192}, {"ATA TOSHIBA THNSNH25", 8192}, {"ATA TOSHIBA THNSNH51", 8192}, {"ATA APPLE SSD TS064C", 4096}, {"ATA APPLE SSD TS128C", 4096}, {"ATA APPLE SSD TS256C", 4096}, {"ATA APPLE SSD TS512C", 4096}, {"ATA INTEL SSDSA2M040", 4096}, {"ATA INTEL SSDSA2M080", 4096}, {"ATA INTEL SSDSA2M160", 4096}, {"ATA INTEL SSDSC2MH12", 4096}, {"ATA INTEL SSDSC2MH25", 4096}, {"ATA OCZ CORE_SSD ", 4096}, {"ATA OCZ-VERTEX ", 4096}, {"ATA SAMSUNG MCCOE32G", 4096}, {"ATA SAMSUNG MCCOE64G", 4096}, {"ATA SAMSUNG SSD PM80", 4096}, /* Flash drives optimized for 4KB IOs on larger pages */ {"ATA INTEL SSDSC2BA10", 4096}, {"ATA INTEL SSDSC2BA20", 4096}, {"ATA INTEL SSDSC2BA40", 4096}, {"ATA INTEL SSDSC2BA80", 4096}, {"ATA INTEL SSDSC2BB08", 4096}, {"ATA INTEL SSDSC2BB12", 4096}, {"ATA INTEL SSDSC2BB16", 4096}, {"ATA INTEL SSDSC2BB24", 4096}, {"ATA INTEL SSDSC2BB30", 4096}, {"ATA INTEL SSDSC2BB40", 4096}, {"ATA INTEL SSDSC2BB48", 4096}, {"ATA INTEL SSDSC2BB60", 4096}, {"ATA INTEL SSDSC2BB80", 4096}, {"ATA INTEL SSDSC2BW24", 4096}, {"ATA INTEL SSDSC2BW48", 4096}, {"ATA INTEL SSDSC2BP24", 4096}, {"ATA INTEL SSDSC2BP48", 4096}, {"NA SmrtStorSDLKAE9W", 4096}, {"NVMe Amazon EC2 NVMe ", 4096}, /* Imported from Open Solaris */ {"ATA MARVELL SD88SA02", 4096}, /* Advanced format Hard drives */ {"ATA Hitachi HDS5C303", 4096}, {"ATA SAMSUNG HD204UI ", 4096}, {"ATA ST2000DL004 HD20", 4096}, {"ATA WDC WD10EARS-00M", 4096}, {"ATA WDC WD10EARS-00S", 4096}, {"ATA WDC WD10EARS-00Z", 4096}, {"ATA WDC WD15EARS-00M", 4096}, {"ATA WDC WD15EARS-00S", 4096}, {"ATA WDC WD15EARS-00Z", 4096}, {"ATA WDC WD20EARS-00M", 4096}, {"ATA WDC WD20EARS-00S", 4096}, {"ATA WDC WD20EARS-00Z", 4096}, {"ATA WDC WD1600BEVT-0", 4096}, {"ATA WDC WD2500BEVT-0", 4096}, {"ATA WDC WD3200BEVT-0", 4096}, {"ATA WDC WD5000BEVT-0", 4096}, }; #define INQ_REPLY_LEN 96 #define INQ_CMD_LEN 6 static const int vdev_disk_database_size = sizeof (vdev_disk_database) / sizeof (vdev_disk_database[0]); boolean_t check_sector_size_database(char *path, int *sector_size) { unsigned char inq_buff[INQ_REPLY_LEN]; unsigned char sense_buffer[32]; unsigned char inq_cmd_blk[INQ_CMD_LEN] = {INQUIRY, 0, 0, 0, INQ_REPLY_LEN, 0}; sg_io_hdr_t io_hdr; int error; int fd; int i; /* Prepare INQUIRY command */ memset(&io_hdr, 0, sizeof (sg_io_hdr_t)); io_hdr.interface_id = 'S'; io_hdr.cmd_len = sizeof (inq_cmd_blk); io_hdr.mx_sb_len = sizeof (sense_buffer); io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; io_hdr.dxfer_len = INQ_REPLY_LEN; io_hdr.dxferp = inq_buff; io_hdr.cmdp = inq_cmd_blk; io_hdr.sbp = sense_buffer; io_hdr.timeout = 10; /* 10 milliseconds is ample time */ if ((fd = open(path, O_RDONLY|O_DIRECT)) < 0) return (B_FALSE); error = ioctl(fd, SG_IO, (unsigned long) &io_hdr); (void) close(fd); if (error < 0) return (B_FALSE); if ((io_hdr.info & SG_INFO_OK_MASK) != SG_INFO_OK) return (B_FALSE); for (i = 0; i < vdev_disk_database_size; i++) { if (memcmp(inq_buff + 8, vdev_disk_database[i].id, 24)) continue; *sector_size = vdev_disk_database[i].sector_size; return (B_TRUE); } return (B_FALSE); } static int check_slice(const char *path, blkid_cache cache, int force, boolean_t isspare) { int err; char *value; /* No valid type detected device is safe to use */ value = blkid_get_tag_value(cache, "TYPE", path); if (value == NULL) return (0); /* * If libblkid detects a ZFS device, we check the device * using check_file() to see if it's safe. The one safe * case is a spare device shared between multiple pools. */ if (strcmp(value, "zfs_member") == 0) { err = check_file(path, force, isspare); } else { if (force) { err = 0; } else { err = -1; vdev_error(gettext("%s contains a filesystem of " "type '%s'\n"), path, value); } } free(value); return (err); } /* * Validate that a disk including all partitions are safe to use. * * For EFI labeled disks this can done relatively easily with the libefi * library. The partition numbers are extracted from the label and used * to generate the expected /dev/ paths. Each partition can then be * checked for conflicts. * * For non-EFI labeled disks (MBR/EBR/etc) the same process is possible * but due to the lack of a readily available libraries this scanning is * not implemented. Instead only the device path as given is checked. */ static int check_disk(const char *path, blkid_cache cache, int force, boolean_t isspare, boolean_t iswholedisk) { struct dk_gpt *vtoc; char slice_path[MAXPATHLEN]; int err = 0; int fd, i; int flags = O_RDONLY|O_DIRECT; if (!iswholedisk) return (check_slice(path, cache, force, isspare)); /* only spares can be shared, other devices require exclusive access */ if (!isspare) flags |= O_EXCL; if ((fd = open(path, flags)) < 0) { char *value = blkid_get_tag_value(cache, "TYPE", path); (void) fprintf(stderr, gettext("%s is in use and contains " "a %s filesystem.\n"), path, value ? value : "unknown"); free(value); return (-1); } /* * Expected to fail for non-EFI labeled disks. Just check the device * as given and do not attempt to detect and scan partitions. */ err = efi_alloc_and_read(fd, &vtoc); if (err) { (void) close(fd); return (check_slice(path, cache, force, isspare)); } /* * The primary efi partition label is damaged however the secondary * label at the end of the device is intact. Rather than use this * label we should play it safe and treat this as a non efi device. */ if (vtoc->efi_flags & EFI_GPT_PRIMARY_CORRUPT) { efi_free(vtoc); (void) close(fd); if (force) { /* Partitions will now be created using the backup */ return (0); } else { vdev_error(gettext("%s contains a corrupt primary " "EFI label.\n"), path); return (-1); } } for (i = 0; i < vtoc->efi_nparts; i++) { if (vtoc->efi_parts[i].p_tag == V_UNASSIGNED || uuid_is_null((uchar_t *)&vtoc->efi_parts[i].p_guid)) continue; if (strncmp(path, UDISK_ROOT, strlen(UDISK_ROOT)) == 0) (void) snprintf(slice_path, sizeof (slice_path), "%s%s%d", path, "-part", i+1); else (void) snprintf(slice_path, sizeof (slice_path), "%s%s%d", path, isdigit(path[strlen(path)-1]) ? "p" : "", i+1); err = check_slice(slice_path, cache, force, isspare); if (err) break; } efi_free(vtoc); (void) close(fd); return (err); } int check_device(const char *path, boolean_t force, boolean_t isspare, boolean_t iswholedisk) { blkid_cache cache; int error; error = blkid_get_cache(&cache, NULL); if (error != 0) { (void) fprintf(stderr, gettext("unable to access the blkid " "cache.\n")); return (-1); } error = check_disk(path, cache, force, isspare, iswholedisk); blkid_put_cache(cache); return (error); } void after_zpool_upgrade(zpool_handle_t *zhp) { (void) zhp; } int check_file(const char *file, boolean_t force, boolean_t isspare) { return (check_file_generic(file, force, isspare)); } /* * Read from a sysfs file and return an allocated string. Removes * the newline from the end of the string if there is one. * * Returns a string on success (which must be freed), or NULL on error. */ static char *zpool_sysfs_gets(char *path) { int fd; struct stat statbuf; char *buf = NULL; ssize_t count = 0; fd = open(path, O_RDONLY); if (fd < 0) return (NULL); if (fstat(fd, &statbuf) != 0) { close(fd); return (NULL); } - buf = calloc(sizeof (*buf), statbuf.st_size + 1); + buf = calloc(statbuf.st_size + 1, sizeof (*buf)); if (buf == NULL) { close(fd); return (NULL); } /* * Note, we can read less bytes than st_size, and that's ok. Sysfs * files will report their size is 4k even if they only return a small * string. */ count = read(fd, buf, statbuf.st_size); if (count < 0) { /* Error doing read() or we overran the buffer */ close(fd); free(buf); return (NULL); } /* Remove trailing newline */ if (count > 0 && buf[count - 1] == '\n') buf[count - 1] = 0; close(fd); return (buf); } /* * Write a string to a sysfs file. * * Returns 0 on success, non-zero otherwise. */ static int zpool_sysfs_puts(char *path, char *str) { FILE *file; file = fopen(path, "w"); if (!file) { return (-1); } if (fputs(str, file) < 0) { fclose(file); return (-2); } fclose(file); return (0); } /* Given a vdev nvlist_t, rescan its enclosure sysfs path */ static void rescan_vdev_config_dev_sysfs_path(nvlist_t *vdev_nv) { update_vdev_config_dev_sysfs_path(vdev_nv, fnvlist_lookup_string(vdev_nv, ZPOOL_CONFIG_PATH), ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH); } /* * Given a power string: "on", "off", "1", or "0", return 0 if it's an * off value, 1 if it's an on value, and -1 if the value is unrecognized. */ static int zpool_power_parse_value(char *str) { if ((strcmp(str, "off") == 0) || (strcmp(str, "0") == 0)) return (0); if ((strcmp(str, "on") == 0) || (strcmp(str, "1") == 0)) return (1); return (-1); } /* * Given a vdev string return an allocated string containing the sysfs path to * its power control file. Also do a check if the power control file really * exists and has correct permissions. * * Example returned strings: * * /sys/class/enclosure/0:0:122:0/10/power_status * /sys/bus/pci/slots/10/power * * Returns allocated string on success (which must be freed), NULL on failure. */ static char * zpool_power_sysfs_path(zpool_handle_t *zhp, char *vdev) { const char *enc_sysfs_dir = NULL; char *path = NULL; nvlist_t *vdev_nv = zpool_find_vdev(zhp, vdev, NULL, NULL, NULL); if (vdev_nv == NULL) { return (NULL); } /* Make sure we're getting the updated enclosure sysfs path */ rescan_vdev_config_dev_sysfs_path(vdev_nv); if (nvlist_lookup_string(vdev_nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, &enc_sysfs_dir) != 0) { return (NULL); } if (asprintf(&path, "%s/power_status", enc_sysfs_dir) == -1) return (NULL); if (access(path, W_OK) != 0) { free(path); path = NULL; /* No HDD 'power_control' file, maybe it's NVMe? */ if (asprintf(&path, "%s/power", enc_sysfs_dir) == -1) { return (NULL); } if (access(path, R_OK | W_OK) != 0) { /* Not NVMe either */ free(path); return (NULL); } } return (path); } /* * Given a path to a sysfs power control file, return B_TRUE if you should use * "on/off" words to control it, or B_FALSE otherwise ("0/1" to control). */ static boolean_t zpool_power_use_word(char *sysfs_path) { if (strcmp(&sysfs_path[strlen(sysfs_path) - strlen("power_status")], "power_status") == 0) { return (B_TRUE); } return (B_FALSE); } /* * Check the sysfs power control value for a vdev. * * Returns: * 0 - Power is off * 1 - Power is on * -1 - Error or unsupported */ int zpool_power_current_state(zpool_handle_t *zhp, char *vdev) { char *val; int rc; char *path = zpool_power_sysfs_path(zhp, vdev); if (path == NULL) return (-1); val = zpool_sysfs_gets(path); if (val == NULL) { free(path); return (-1); } rc = zpool_power_parse_value(val); free(val); free(path); return (rc); } /* * Turn on or off the slot to a device * * Device path is the full path to the device (like /dev/sda or /dev/sda1). * * Return code: * 0: Success * ENOTSUP: Power control not supported for OS * EBADSLT: Couldn't read current power state * ENOENT: No sysfs path to power control * EIO: Couldn't write sysfs power value * EBADE: Sysfs power value didn't change */ int zpool_power(zpool_handle_t *zhp, char *vdev, boolean_t turn_on) { char *sysfs_path; const char *val; int rc; int timeout_ms; rc = zpool_power_current_state(zhp, vdev); if (rc == -1) { return (EBADSLT); } /* Already correct value? */ if (rc == (int)turn_on) return (0); sysfs_path = zpool_power_sysfs_path(zhp, vdev); if (sysfs_path == NULL) return (ENOENT); if (zpool_power_use_word(sysfs_path)) { val = turn_on ? "on" : "off"; } else { val = turn_on ? "1" : "0"; } rc = zpool_sysfs_puts(sysfs_path, (char *)val); free(sysfs_path); if (rc != 0) { return (EIO); } /* * Wait up to 30 seconds for sysfs power value to change after * writing it. */ timeout_ms = zpool_getenv_int("ZPOOL_POWER_ON_SLOT_TIMEOUT_MS", 30000); for (int i = 0; i < MAX(1, timeout_ms / 200); i++) { rc = zpool_power_current_state(zhp, vdev); if (rc == (int)turn_on) return (0); /* success */ fsleep(0.200); /* 200ms */ } /* sysfs value never changed */ return (EBADE); } diff --git a/lib/libuutil/uu_list.c b/lib/libuutil/uu_list.c index 0ca6f05205e9..aa8b129cc22a 100644 --- a/lib/libuutil/uu_list.c +++ b/lib/libuutil/uu_list.c @@ -1,716 +1,722 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include "libuutil_common.h" #include #include #include #include #define ELEM_TO_NODE(lp, e) \ ((uu_list_node_impl_t *)((uintptr_t)(e) + (lp)->ul_offset)) #define NODE_TO_ELEM(lp, n) \ ((void *)((uintptr_t)(n) - (lp)->ul_offset)) /* * uu_list_index_ts define a location for insertion. They are simply a * pointer to the object after the insertion point. We store a mark * in the low-bits of the index, to help prevent mistakes. * * When debugging, the index mark changes on every insert and delete, to * catch stale references. */ #define INDEX_MAX (sizeof (uintptr_t) - 1) #define INDEX_NEXT(m) (((m) == INDEX_MAX)? 1 : ((m) + 1) & INDEX_MAX) #define INDEX_TO_NODE(i) ((uu_list_node_impl_t *)((i) & ~INDEX_MAX)) #define NODE_TO_INDEX(p, n) (((uintptr_t)(n) & ~INDEX_MAX) | (p)->ul_index) #define INDEX_VALID(p, i) (((i) & INDEX_MAX) == (p)->ul_index) #define INDEX_CHECK(i) (((i) & INDEX_MAX) != 0) #define POOL_TO_MARKER(pp) ((void *)((uintptr_t)(pp) | 1)) static uu_list_pool_t uu_null_lpool = { &uu_null_lpool, &uu_null_lpool }; static pthread_mutex_t uu_lpool_list_lock = PTHREAD_MUTEX_INITIALIZER; uu_list_pool_t * uu_list_pool_create(const char *name, size_t objsize, size_t nodeoffset, uu_compare_fn_t *compare_func, uint32_t flags) { uu_list_pool_t *pp, *next, *prev; if (name == NULL || uu_check_name(name, UU_NAME_DOMAIN) == -1 || nodeoffset + sizeof (uu_list_node_t) > objsize) { uu_set_error(UU_ERROR_INVALID_ARGUMENT); return (NULL); } if (flags & ~UU_LIST_POOL_DEBUG) { uu_set_error(UU_ERROR_UNKNOWN_FLAG); return (NULL); } pp = uu_zalloc(sizeof (uu_list_pool_t)); if (pp == NULL) { uu_set_error(UU_ERROR_NO_MEMORY); return (NULL); } (void) strlcpy(pp->ulp_name, name, sizeof (pp->ulp_name)); pp->ulp_nodeoffset = nodeoffset; pp->ulp_objsize = objsize; pp->ulp_cmp = compare_func; if (flags & UU_LIST_POOL_DEBUG) pp->ulp_debug = 1; pp->ulp_last_index = 0; (void) pthread_mutex_init(&pp->ulp_lock, NULL); pp->ulp_null_list.ul_next = &pp->ulp_null_list; pp->ulp_null_list.ul_prev = &pp->ulp_null_list; (void) pthread_mutex_lock(&uu_lpool_list_lock); pp->ulp_next = next = &uu_null_lpool; pp->ulp_prev = prev = next->ulp_prev; next->ulp_prev = pp; prev->ulp_next = pp; (void) pthread_mutex_unlock(&uu_lpool_list_lock); return (pp); } void uu_list_pool_destroy(uu_list_pool_t *pp) { if (pp->ulp_debug) { if (pp->ulp_null_list.ul_next != &pp->ulp_null_list || pp->ulp_null_list.ul_prev != &pp->ulp_null_list) { uu_panic("uu_list_pool_destroy: Pool \"%.*s\" (%p) has " "outstanding lists, or is corrupt.\n", (int)sizeof (pp->ulp_name), pp->ulp_name, (void *)pp); } } (void) pthread_mutex_lock(&uu_lpool_list_lock); pp->ulp_next->ulp_prev = pp->ulp_prev; pp->ulp_prev->ulp_next = pp->ulp_next; (void) pthread_mutex_unlock(&uu_lpool_list_lock); pp->ulp_prev = NULL; pp->ulp_next = NULL; uu_free(pp); } void uu_list_node_init(void *base, uu_list_node_t *np_arg, uu_list_pool_t *pp) { uu_list_node_impl_t *np = (uu_list_node_impl_t *)np_arg; if (pp->ulp_debug) { uintptr_t offset = (uintptr_t)np - (uintptr_t)base; if (offset + sizeof (*np) > pp->ulp_objsize) { uu_panic("uu_list_node_init(%p, %p, %p (\"%s\")): " "offset %ld doesn't fit in object (size %ld)\n", base, (void *)np, (void *)pp, pp->ulp_name, (long)offset, (long)pp->ulp_objsize); } if (offset != pp->ulp_nodeoffset) { uu_panic("uu_list_node_init(%p, %p, %p (\"%s\")): " "offset %ld doesn't match pool's offset (%ld)\n", base, (void *)np, (void *)pp, pp->ulp_name, (long)offset, (long)pp->ulp_objsize); } } np->uln_next = POOL_TO_MARKER(pp); np->uln_prev = NULL; } void uu_list_node_fini(void *base, uu_list_node_t *np_arg, uu_list_pool_t *pp) { uu_list_node_impl_t *np = (uu_list_node_impl_t *)np_arg; if (pp->ulp_debug) { if (np->uln_next == NULL && np->uln_prev == NULL) { uu_panic("uu_list_node_fini(%p, %p, %p (\"%s\")): " "node already finied\n", base, (void *)np_arg, (void *)pp, pp->ulp_name); } if (np->uln_next != POOL_TO_MARKER(pp) || np->uln_prev != NULL) { uu_panic("uu_list_node_fini(%p, %p, %p (\"%s\")): " "node corrupt or on list\n", base, (void *)np_arg, (void *)pp, pp->ulp_name); } } np->uln_next = NULL; np->uln_prev = NULL; } uu_list_t * uu_list_create(uu_list_pool_t *pp, void *parent, uint32_t flags) { uu_list_t *lp, *next, *prev; if (flags & ~(UU_LIST_DEBUG | UU_LIST_SORTED)) { uu_set_error(UU_ERROR_UNKNOWN_FLAG); return (NULL); } if ((flags & UU_LIST_SORTED) && pp->ulp_cmp == NULL) { if (pp->ulp_debug) uu_panic("uu_list_create(%p, ...): requested " "UU_LIST_SORTED, but pool has no comparison func\n", (void *)pp); uu_set_error(UU_ERROR_NOT_SUPPORTED); return (NULL); } lp = uu_zalloc(sizeof (*lp)); if (lp == NULL) { uu_set_error(UU_ERROR_NO_MEMORY); return (NULL); } lp->ul_pool = pp; lp->ul_parent = parent; lp->ul_offset = pp->ulp_nodeoffset; lp->ul_debug = pp->ulp_debug || (flags & UU_LIST_DEBUG); lp->ul_sorted = (flags & UU_LIST_SORTED); lp->ul_numnodes = 0; lp->ul_index = (pp->ulp_last_index = INDEX_NEXT(pp->ulp_last_index)); lp->ul_null_node.uln_next = &lp->ul_null_node; lp->ul_null_node.uln_prev = &lp->ul_null_node; lp->ul_null_walk.ulw_next = &lp->ul_null_walk; lp->ul_null_walk.ulw_prev = &lp->ul_null_walk; (void) pthread_mutex_lock(&pp->ulp_lock); next = &pp->ulp_null_list; prev = next->ul_prev; lp->ul_next = next; lp->ul_prev = prev; next->ul_prev = lp; prev->ul_next = lp; (void) pthread_mutex_unlock(&pp->ulp_lock); return (lp); } void uu_list_destroy(uu_list_t *lp) { uu_list_pool_t *pp = lp->ul_pool; if (lp->ul_debug) { if (lp->ul_null_node.uln_next != &lp->ul_null_node || lp->ul_null_node.uln_prev != &lp->ul_null_node) { uu_panic("uu_list_destroy(%p): list not empty\n", (void *)lp); } if (lp->ul_numnodes != 0) { uu_panic("uu_list_destroy(%p): numnodes is nonzero, " "but list is empty\n", (void *)lp); } if (lp->ul_null_walk.ulw_next != &lp->ul_null_walk || lp->ul_null_walk.ulw_prev != &lp->ul_null_walk) { uu_panic("uu_list_destroy(%p): outstanding walkers\n", (void *)lp); } } (void) pthread_mutex_lock(&pp->ulp_lock); lp->ul_next->ul_prev = lp->ul_prev; lp->ul_prev->ul_next = lp->ul_next; (void) pthread_mutex_unlock(&pp->ulp_lock); lp->ul_prev = NULL; lp->ul_next = NULL; lp->ul_pool = NULL; uu_free(lp); } static void list_insert(uu_list_t *lp, uu_list_node_impl_t *np, uu_list_node_impl_t *prev, uu_list_node_impl_t *next) { if (lp->ul_debug) { if (next->uln_prev != prev || prev->uln_next != next) uu_panic("insert(%p): internal error: %p and %p not " "neighbors\n", (void *)lp, (void *)next, (void *)prev); if (np->uln_next != POOL_TO_MARKER(lp->ul_pool) || np->uln_prev != NULL) { uu_panic("insert(%p): elem %p node %p corrupt, " "not initialized, or already in a list.\n", (void *)lp, NODE_TO_ELEM(lp, np), (void *)np); } /* * invalidate outstanding uu_list_index_ts. */ lp->ul_index = INDEX_NEXT(lp->ul_index); } np->uln_next = next; np->uln_prev = prev; next->uln_prev = np; prev->uln_next = np; lp->ul_numnodes++; } void uu_list_insert(uu_list_t *lp, void *elem, uu_list_index_t idx) { uu_list_node_impl_t *np; np = INDEX_TO_NODE(idx); if (np == NULL) np = &lp->ul_null_node; if (lp->ul_debug) { if (!INDEX_VALID(lp, idx)) uu_panic("uu_list_insert(%p, %p, %p): %s\n", (void *)lp, elem, (void *)idx, INDEX_CHECK(idx)? "outdated index" : "invalid index"); if (np->uln_prev == NULL) uu_panic("uu_list_insert(%p, %p, %p): out-of-date " "index\n", (void *)lp, elem, (void *)idx); } list_insert(lp, ELEM_TO_NODE(lp, elem), np->uln_prev, np); } void * uu_list_find(uu_list_t *lp, void *elem, void *private, uu_list_index_t *out) { int sorted = lp->ul_sorted; uu_compare_fn_t *func = lp->ul_pool->ulp_cmp; uu_list_node_impl_t *np; if (func == NULL) { if (out != NULL) *out = 0; uu_set_error(UU_ERROR_NOT_SUPPORTED); return (NULL); } for (np = lp->ul_null_node.uln_next; np != &lp->ul_null_node; np = np->uln_next) { void *ep = NODE_TO_ELEM(lp, np); int cmp = func(ep, elem, private); if (cmp == 0) { if (out != NULL) *out = NODE_TO_INDEX(lp, np); return (ep); } if (sorted && cmp > 0) { if (out != NULL) *out = NODE_TO_INDEX(lp, np); return (NULL); } } if (out != NULL) *out = NODE_TO_INDEX(lp, 0); return (NULL); } void * uu_list_nearest_next(uu_list_t *lp, uu_list_index_t idx) { uu_list_node_impl_t *np = INDEX_TO_NODE(idx); if (np == NULL) np = &lp->ul_null_node; if (lp->ul_debug) { if (!INDEX_VALID(lp, idx)) uu_panic("uu_list_nearest_next(%p, %p): %s\n", (void *)lp, (void *)idx, INDEX_CHECK(idx)? "outdated index" : "invalid index"); if (np->uln_prev == NULL) uu_panic("uu_list_nearest_next(%p, %p): out-of-date " "index\n", (void *)lp, (void *)idx); } if (np == &lp->ul_null_node) return (NULL); else return (NODE_TO_ELEM(lp, np)); } void * uu_list_nearest_prev(uu_list_t *lp, uu_list_index_t idx) { uu_list_node_impl_t *np = INDEX_TO_NODE(idx); if (np == NULL) np = &lp->ul_null_node; if (lp->ul_debug) { if (!INDEX_VALID(lp, idx)) uu_panic("uu_list_nearest_prev(%p, %p): %s\n", (void *)lp, (void *)idx, INDEX_CHECK(idx)? "outdated index" : "invalid index"); if (np->uln_prev == NULL) uu_panic("uu_list_nearest_prev(%p, %p): out-of-date " "index\n", (void *)lp, (void *)idx); } if ((np = np->uln_prev) == &lp->ul_null_node) return (NULL); else return (NODE_TO_ELEM(lp, np)); } static void list_walk_init(uu_list_walk_t *wp, uu_list_t *lp, uint32_t flags) { uu_list_walk_t *next, *prev; int robust = (flags & UU_WALK_ROBUST); int direction = (flags & UU_WALK_REVERSE)? -1 : 1; (void) memset(wp, 0, sizeof (*wp)); wp->ulw_list = lp; wp->ulw_robust = robust; wp->ulw_dir = direction; if (direction > 0) wp->ulw_next_result = lp->ul_null_node.uln_next; else wp->ulw_next_result = lp->ul_null_node.uln_prev; if (lp->ul_debug || robust) { /* * Add this walker to the list's list of walkers so * uu_list_remove() can advance us if somebody tries to * remove ulw_next_result. */ wp->ulw_next = next = &lp->ul_null_walk; wp->ulw_prev = prev = next->ulw_prev; next->ulw_prev = wp; prev->ulw_next = wp; } } static uu_list_node_impl_t * list_walk_advance(uu_list_walk_t *wp, uu_list_t *lp) { uu_list_node_impl_t *np = wp->ulw_next_result; uu_list_node_impl_t *next; if (np == &lp->ul_null_node) return (NULL); next = (wp->ulw_dir > 0)? np->uln_next : np->uln_prev; wp->ulw_next_result = next; return (np); } static void list_walk_fini(uu_list_walk_t *wp) { /* GLXXX debugging? */ if (wp->ulw_next != NULL) { wp->ulw_next->ulw_prev = wp->ulw_prev; wp->ulw_prev->ulw_next = wp->ulw_next; wp->ulw_next = NULL; wp->ulw_prev = NULL; } wp->ulw_list = NULL; wp->ulw_next_result = NULL; } uu_list_walk_t * uu_list_walk_start(uu_list_t *lp, uint32_t flags) { uu_list_walk_t *wp; if (flags & ~(UU_WALK_ROBUST | UU_WALK_REVERSE)) { uu_set_error(UU_ERROR_UNKNOWN_FLAG); return (NULL); } wp = uu_zalloc(sizeof (*wp)); if (wp == NULL) { uu_set_error(UU_ERROR_NO_MEMORY); return (NULL); } list_walk_init(wp, lp, flags); return (wp); } void * uu_list_walk_next(uu_list_walk_t *wp) { uu_list_t *lp = wp->ulw_list; uu_list_node_impl_t *np = list_walk_advance(wp, lp); if (np == NULL) return (NULL); return (NODE_TO_ELEM(lp, np)); } void uu_list_walk_end(uu_list_walk_t *wp) { list_walk_fini(wp); uu_free(wp); } int uu_list_walk(uu_list_t *lp, uu_walk_fn_t *func, void *private, uint32_t flags) { uu_list_node_impl_t *np; int status = UU_WALK_NEXT; int robust = (flags & UU_WALK_ROBUST); int reverse = (flags & UU_WALK_REVERSE); if (flags & ~(UU_WALK_ROBUST | UU_WALK_REVERSE)) { uu_set_error(UU_ERROR_UNKNOWN_FLAG); return (-1); } if (lp->ul_debug || robust) { - uu_list_walk_t my_walk; + uu_list_walk_t *my_walk; void *e; - list_walk_init(&my_walk, lp, flags); + my_walk = uu_zalloc(sizeof (*my_walk)); + if (my_walk == NULL) + return (-1); + + list_walk_init(my_walk, lp, flags); while (status == UU_WALK_NEXT && - (e = uu_list_walk_next(&my_walk)) != NULL) + (e = uu_list_walk_next(my_walk)) != NULL) status = (*func)(e, private); - list_walk_fini(&my_walk); + list_walk_fini(my_walk); + + uu_free(my_walk); } else { if (!reverse) { for (np = lp->ul_null_node.uln_next; status == UU_WALK_NEXT && np != &lp->ul_null_node; np = np->uln_next) { status = (*func)(NODE_TO_ELEM(lp, np), private); } } else { for (np = lp->ul_null_node.uln_prev; status == UU_WALK_NEXT && np != &lp->ul_null_node; np = np->uln_prev) { status = (*func)(NODE_TO_ELEM(lp, np), private); } } } if (status >= 0) return (0); uu_set_error(UU_ERROR_CALLBACK_FAILED); return (-1); } void uu_list_remove(uu_list_t *lp, void *elem) { uu_list_node_impl_t *np = ELEM_TO_NODE(lp, elem); uu_list_walk_t *wp; if (lp->ul_debug) { if (np->uln_prev == NULL) uu_panic("uu_list_remove(%p, %p): elem not on list\n", (void *)lp, elem); /* * invalidate outstanding uu_list_index_ts. */ lp->ul_index = INDEX_NEXT(lp->ul_index); } /* * robust walkers must be advanced. In debug mode, non-robust * walkers are also on the list. If there are any, it's an error. */ for (wp = lp->ul_null_walk.ulw_next; wp != &lp->ul_null_walk; wp = wp->ulw_next) { if (wp->ulw_robust) { if (np == wp->ulw_next_result) (void) list_walk_advance(wp, lp); } else if (wp->ulw_next_result != NULL) { uu_panic("uu_list_remove(%p, %p): active non-robust " "walker\n", (void *)lp, elem); } } np->uln_next->uln_prev = np->uln_prev; np->uln_prev->uln_next = np->uln_next; lp->ul_numnodes--; np->uln_next = POOL_TO_MARKER(lp->ul_pool); np->uln_prev = NULL; } void * uu_list_teardown(uu_list_t *lp, void **cookie) { void *ep; /* * XXX: disable list modification until list is empty */ if (lp->ul_debug && *cookie != NULL) uu_panic("uu_list_teardown(%p, %p): unexpected cookie\n", (void *)lp, (void *)cookie); ep = uu_list_first(lp); if (ep) uu_list_remove(lp, ep); return (ep); } int uu_list_insert_before(uu_list_t *lp, void *target, void *elem) { uu_list_node_impl_t *np = ELEM_TO_NODE(lp, target); if (target == NULL) np = &lp->ul_null_node; if (lp->ul_debug) { if (np->uln_prev == NULL) uu_panic("uu_list_insert_before(%p, %p, %p): %p is " "not currently on a list\n", (void *)lp, target, elem, target); } if (lp->ul_sorted) { if (lp->ul_debug) uu_panic("uu_list_insert_before(%p, ...): list is " "UU_LIST_SORTED\n", (void *)lp); uu_set_error(UU_ERROR_NOT_SUPPORTED); return (-1); } list_insert(lp, ELEM_TO_NODE(lp, elem), np->uln_prev, np); return (0); } int uu_list_insert_after(uu_list_t *lp, void *target, void *elem) { uu_list_node_impl_t *np = ELEM_TO_NODE(lp, target); if (target == NULL) np = &lp->ul_null_node; if (lp->ul_debug) { if (np->uln_prev == NULL) uu_panic("uu_list_insert_after(%p, %p, %p): %p is " "not currently on a list\n", (void *)lp, target, elem, target); } if (lp->ul_sorted) { if (lp->ul_debug) uu_panic("uu_list_insert_after(%p, ...): list is " "UU_LIST_SORTED\n", (void *)lp); uu_set_error(UU_ERROR_NOT_SUPPORTED); return (-1); } list_insert(lp, ELEM_TO_NODE(lp, elem), np, np->uln_next); return (0); } size_t uu_list_numnodes(uu_list_t *lp) { return (lp->ul_numnodes); } void * uu_list_first(uu_list_t *lp) { uu_list_node_impl_t *n = lp->ul_null_node.uln_next; if (n == &lp->ul_null_node) return (NULL); return (NODE_TO_ELEM(lp, n)); } void * uu_list_last(uu_list_t *lp) { uu_list_node_impl_t *n = lp->ul_null_node.uln_prev; if (n == &lp->ul_null_node) return (NULL); return (NODE_TO_ELEM(lp, n)); } void * uu_list_next(uu_list_t *lp, void *elem) { uu_list_node_impl_t *n = ELEM_TO_NODE(lp, elem); n = n->uln_next; if (n == &lp->ul_null_node) return (NULL); return (NODE_TO_ELEM(lp, n)); } void * uu_list_prev(uu_list_t *lp, void *elem) { uu_list_node_impl_t *n = ELEM_TO_NODE(lp, elem); n = n->uln_prev; if (n == &lp->ul_null_node) return (NULL); return (NODE_TO_ELEM(lp, n)); } /* * called from uu_lockup() and uu_release(), as part of our fork1()-safety. */ void uu_list_lockup(void) { uu_list_pool_t *pp; (void) pthread_mutex_lock(&uu_lpool_list_lock); for (pp = uu_null_lpool.ulp_next; pp != &uu_null_lpool; pp = pp->ulp_next) (void) pthread_mutex_lock(&pp->ulp_lock); } void uu_list_release(void) { uu_list_pool_t *pp; for (pp = uu_null_lpool.ulp_next; pp != &uu_null_lpool; pp = pp->ulp_next) (void) pthread_mutex_unlock(&pp->ulp_lock); (void) pthread_mutex_unlock(&uu_lpool_list_lock); } diff --git a/module/zfs/vdev_raidz.c b/module/zfs/vdev_raidz.c index b03331ec69c6..de7d0fa79478 100644 --- a/module/zfs/vdev_raidz.c +++ b/module/zfs/vdev_raidz.c @@ -1,5020 +1,5021 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2020 by Delphix. All rights reserved. * Copyright (c) 2016 Gvozden Nešković. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef ZFS_DEBUG #include /* For vdev_xlate() in vdev_raidz_io_verify() */ #endif /* * Virtual device vector for RAID-Z. * * This vdev supports single, double, and triple parity. For single parity, * we use a simple XOR of all the data columns. For double or triple parity, * we use a special case of Reed-Solomon coding. This extends the * technique described in "The mathematics of RAID-6" by H. Peter Anvin by * drawing on the system described in "A Tutorial on Reed-Solomon Coding for * Fault-Tolerance in RAID-like Systems" by James S. Plank on which the * former is also based. The latter is designed to provide higher performance * for writes. * * Note that the Plank paper claimed to support arbitrary N+M, but was then * amended six years later identifying a critical flaw that invalidates its * claims. Nevertheless, the technique can be adapted to work for up to * triple parity. For additional parity, the amendment "Note: Correction to * the 1997 Tutorial on Reed-Solomon Coding" by James S. Plank and Ying Ding * is viable, but the additional complexity means that write performance will * suffer. * * All of the methods above operate on a Galois field, defined over the * integers mod 2^N. In our case we choose N=8 for GF(8) so that all elements * can be expressed with a single byte. Briefly, the operations on the * field are defined as follows: * * o addition (+) is represented by a bitwise XOR * o subtraction (-) is therefore identical to addition: A + B = A - B * o multiplication of A by 2 is defined by the following bitwise expression: * * (A * 2)_7 = A_6 * (A * 2)_6 = A_5 * (A * 2)_5 = A_4 * (A * 2)_4 = A_3 + A_7 * (A * 2)_3 = A_2 + A_7 * (A * 2)_2 = A_1 + A_7 * (A * 2)_1 = A_0 * (A * 2)_0 = A_7 * * In C, multiplying by 2 is therefore ((a << 1) ^ ((a & 0x80) ? 0x1d : 0)). * As an aside, this multiplication is derived from the error correcting * primitive polynomial x^8 + x^4 + x^3 + x^2 + 1. * * Observe that any number in the field (except for 0) can be expressed as a * power of 2 -- a generator for the field. We store a table of the powers of * 2 and logs base 2 for quick look ups, and exploit the fact that A * B can * be rewritten as 2^(log_2(A) + log_2(B)) (where '+' is normal addition rather * than field addition). The inverse of a field element A (A^-1) is therefore * A ^ (255 - 1) = A^254. * * The up-to-three parity columns, P, Q, R over several data columns, * D_0, ... D_n-1, can be expressed by field operations: * * P = D_0 + D_1 + ... + D_n-2 + D_n-1 * Q = 2^n-1 * D_0 + 2^n-2 * D_1 + ... + 2^1 * D_n-2 + 2^0 * D_n-1 * = ((...((D_0) * 2 + D_1) * 2 + ...) * 2 + D_n-2) * 2 + D_n-1 * R = 4^n-1 * D_0 + 4^n-2 * D_1 + ... + 4^1 * D_n-2 + 4^0 * D_n-1 * = ((...((D_0) * 4 + D_1) * 4 + ...) * 4 + D_n-2) * 4 + D_n-1 * * We chose 1, 2, and 4 as our generators because 1 corresponds to the trivial * XOR operation, and 2 and 4 can be computed quickly and generate linearly- * independent coefficients. (There are no additional coefficients that have * this property which is why the uncorrected Plank method breaks down.) * * See the reconstruction code below for how P, Q and R can used individually * or in concert to recover missing data columns. */ #define VDEV_RAIDZ_P 0 #define VDEV_RAIDZ_Q 1 #define VDEV_RAIDZ_R 2 #define VDEV_RAIDZ_MUL_2(x) (((x) << 1) ^ (((x) & 0x80) ? 0x1d : 0)) #define VDEV_RAIDZ_MUL_4(x) (VDEV_RAIDZ_MUL_2(VDEV_RAIDZ_MUL_2(x))) /* * We provide a mechanism to perform the field multiplication operation on a * 64-bit value all at once rather than a byte at a time. This works by * creating a mask from the top bit in each byte and using that to * conditionally apply the XOR of 0x1d. */ #define VDEV_RAIDZ_64MUL_2(x, mask) \ { \ (mask) = (x) & 0x8080808080808080ULL; \ (mask) = ((mask) << 1) - ((mask) >> 7); \ (x) = (((x) << 1) & 0xfefefefefefefefeULL) ^ \ ((mask) & 0x1d1d1d1d1d1d1d1dULL); \ } #define VDEV_RAIDZ_64MUL_4(x, mask) \ { \ VDEV_RAIDZ_64MUL_2((x), mask); \ VDEV_RAIDZ_64MUL_2((x), mask); \ } /* * Big Theory Statement for how a RAIDZ VDEV is expanded * * An existing RAIDZ VDEV can be expanded by attaching a new disk. Expansion * works with all three RAIDZ parity choices, including RAIDZ1, 2, or 3. VDEVs * that have been previously expanded can be expanded again. * * The RAIDZ VDEV must be healthy (must be able to write to all the drives in * the VDEV) when an expansion starts. And the expansion will pause if any * disk in the VDEV fails, and resume once the VDEV is healthy again. All other * operations on the pool can continue while an expansion is in progress (e.g. * read/write, snapshot, zpool add, etc). Except zpool checkpoint, zpool trim, * and zpool initialize which can't be run during an expansion. Following a * reboot or export/import, the expansion resumes where it left off. * * == Reflowing the Data == * * The expansion involves reflowing (copying) the data from the current set * of disks to spread it across the new set which now has one more disk. This * reflow operation is similar to reflowing text when the column width of a * text editor window is expanded. The text doesn’t change but the location of * the text changes to accommodate the new width. An example reflow result for * a 4-wide RAIDZ1 to a 5-wide is shown below. * * Reflow End State * Each letter indicates a parity group (logical stripe) * * Before expansion After Expansion * D1 D2 D3 D4 D1 D2 D3 D4 D5 * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | A | A | A | A | | A | A | A | A | B | * | 1| 2| 3| 4| | 1| 2| 3| 4| 5| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | B | B | C | C | | B | C | C | C | C | * | 5| 6| 7| 8| | 6| 7| 8| 9| 10| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | C | C | D | D | | D | D | E | E | E | * | 9| 10| 11| 12| | 11| 12| 13| 14| 15| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | E | E | E | E | --> | E | F | F | G | G | * | 13| 14| 15| 16| | 16| 17| 18|p 19| 20| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | F | F | G | G | | G | G | H | H | H | * | 17| 18| 19| 20| | 21| 22| 23| 24| 25| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | G | G | H | H | | H | I | I | J | J | * | 21| 22| 23| 24| | 26| 27| 28| 29| 30| * +------+------+------+------+ +------+------+------+------+------+ * | | | | | | | | | | | * | H | H | I | I | | J | J | | | K | * | 25| 26| 27| 28| | 31| 32| 33| 34| 35| * +------+------+------+------+ +------+------+------+------+------+ * * This reflow approach has several advantages. There is no need to read or * modify the block pointers or recompute any block checksums. The reflow * doesn’t need to know where the parity sectors reside. We can read and write * data sequentially and the copy can occur in a background thread in open * context. The design also allows for fast discovery of what data to copy. * * The VDEV metaslabs are processed, one at a time, to copy the block data to * have it flow across all the disks. The metaslab is disabled for allocations * during the copy. As an optimization, we only copy the allocated data which * can be determined by looking at the metaslab range tree. During the copy we * must maintain the redundancy guarantees of the RAIDZ VDEV (i.e., we still * need to be able to survive losing parity count disks). This means we * cannot overwrite data during the reflow that would be needed if a disk is * lost. * * After the reflow completes, all newly-written blocks will have the new * layout, i.e., they will have the parity to data ratio implied by the new * number of disks in the RAIDZ group. Even though the reflow copies all of * the allocated space (data and parity), it is only rearranged, not changed. * * This act of reflowing the data has a few implications about blocks * that were written before the reflow completes: * * - Old blocks will still use the same amount of space (i.e., they will have * the parity to data ratio implied by the old number of disks in the RAIDZ * group). * - Reading old blocks will be slightly slower than before the reflow, for * two reasons. First, we will have to read from all disks in the RAIDZ * VDEV, rather than being able to skip the children that contain only * parity of this block (because the data of a single block is now spread * out across all the disks). Second, in most cases there will be an extra * bcopy, needed to rearrange the data back to its original layout in memory. * * == Scratch Area == * * As we copy the block data, we can only progress to the point that writes * will not overlap with blocks whose progress has not yet been recorded on * disk. Since partially-copied rows are always read from the old location, * we need to stop one row before the sector-wise overlap, to prevent any * row-wise overlap. For example, in the diagram above, when we reflow sector * B6 it will overwite the original location for B5. * * To get around this, a scratch space is used so that we can start copying * without risking data loss by overlapping the row. As an added benefit, it * improves performance at the beginning of the reflow, but that small perf * boost wouldn't be worth the complexity on its own. * * Ideally we want to copy at least 2 * (new_width)^2 so that we have a * separation of 2*(new_width+1) and a chunk size of new_width+2. With the max * RAIDZ width of 255 and 4K sectors this would be 2MB per disk. In practice * the widths will likely be single digits so we can get a substantial chuck * size using only a few MB of scratch per disk. * * The scratch area is persisted to disk which holds a large amount of reflowed * state. We can always read the partially written stripes when a disk fails or * the copy is interrupted (crash) during the initial copying phase and also * get past a small chunk size restriction. At a minimum, the scratch space * must be large enough to get us to the point that one row does not overlap * itself when moved (i.e new_width^2). But going larger is even better. We * use the 3.5 MiB reserved "boot" space that resides after the ZFS disk labels * as our scratch space to handle overwriting the initial part of the VDEV. * * 0 256K 512K 4M * +------+------+-----------------------+----------------------------- * | VDEV | VDEV | Boot Block (3.5M) | Allocatable space ... * | L0 | L1 | Reserved | (Metaslabs) * +------+------+-----------------------+------------------------------- * Scratch Area * * == Reflow Progress Updates == * After the initial scratch-based reflow, the expansion process works * similarly to device removal. We create a new open context thread which * reflows the data, and periodically kicks off sync tasks to update logical * state. In this case, state is the committed progress (offset of next data * to copy). We need to persist the completed offset on disk, so that if we * crash we know which format each VDEV offset is in. * * == Time Dependent Geometry == * * In non-expanded RAIDZ, blocks are read from disk in a column by column * fashion. For a multi-row block, the second sector is in the first column * not in the second column. This allows us to issue full reads for each * column directly into the request buffer. The block data is thus laid out * sequentially in a column-by-column fashion. * * For example, in the before expansion diagram above, one logical block might * be sectors G19-H26. The parity is in G19,H23; and the data is in * G20,H24,G21,H25,G22,H26. * * After a block is reflowed, the sectors that were all in the original column * data can now reside in different columns. When reading from an expanded * VDEV, we need to know the logical stripe width for each block so we can * reconstitute the block’s data after the reads are completed. Likewise, * when we perform the combinatorial reconstruction we need to know the * original width so we can retry combinations from the past layouts. * * Time dependent geometry is what we call having blocks with different layouts * (stripe widths) in the same VDEV. This time-dependent geometry uses the * block’s birth time (+ the time expansion ended) to establish the correct * width for a given block. After an expansion completes, we record the time * for blocks written with a particular width (geometry). * * == On Disk Format Changes == * * New pool feature flag, 'raidz_expansion' whose reference count is the number * of RAIDZ VDEVs that have been expanded. * * The blocks on expanded RAIDZ VDEV can have different logical stripe widths. * * Since the uberblock can point to arbitrary blocks, which might be on the * expanding RAIDZ, and might or might not have been expanded. We need to know * which way a block is laid out before reading it. This info is the next * offset that needs to be reflowed and we persist that in the uberblock, in * the new ub_raidz_reflow_info field, as opposed to the MOS or the vdev label. * After the expansion is complete, we then use the raidz_expand_txgs array * (see below) to determine how to read a block and the ub_raidz_reflow_info * field no longer required. * * The uberblock's ub_raidz_reflow_info field also holds the scratch space * state (i.e., active or not) which is also required before reading a block * during the initial phase of reflowing the data. * * The top-level RAIDZ VDEV has two new entries in the nvlist: * * 'raidz_expand_txgs' array: logical stripe widths by txg are recorded here * and used after the expansion is complete to * determine how to read a raidz block * 'raidz_expanding' boolean: present during reflow and removed after completion * used during a spa import to resume an unfinished * expansion * * And finally the VDEVs top zap adds the following informational entries: * VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE * VDEV_TOP_ZAP_RAIDZ_EXPAND_START_TIME * VDEV_TOP_ZAP_RAIDZ_EXPAND_END_TIME * VDEV_TOP_ZAP_RAIDZ_EXPAND_BYTES_COPIED */ /* * For testing only: pause the raidz expansion after reflowing this amount. * (accessed by ZTS and ztest) */ #ifdef _KERNEL static #endif /* _KERNEL */ unsigned long raidz_expand_max_reflow_bytes = 0; /* * For testing only: pause the raidz expansion at a certain point. */ uint_t raidz_expand_pause_point = 0; /* * Maximum amount of copy io's outstanding at once. */ static unsigned long raidz_expand_max_copy_bytes = 10 * SPA_MAXBLOCKSIZE; /* * Apply raidz map abds aggregation if the number of rows in the map is equal * or greater than the value below. */ static unsigned long raidz_io_aggregate_rows = 4; /* * Automatically start a pool scrub when a RAIDZ expansion completes in * order to verify the checksums of all blocks which have been copied * during the expansion. Automatic scrubbing is enabled by default and * is strongly recommended. */ static int zfs_scrub_after_expand = 1; static void vdev_raidz_row_free(raidz_row_t *rr) { for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_size != 0) abd_free(rc->rc_abd); if (rc->rc_orig_data != NULL) abd_free(rc->rc_orig_data); } if (rr->rr_abd_empty != NULL) abd_free(rr->rr_abd_empty); kmem_free(rr, offsetof(raidz_row_t, rr_col[rr->rr_scols])); } void vdev_raidz_map_free(raidz_map_t *rm) { for (int i = 0; i < rm->rm_nrows; i++) vdev_raidz_row_free(rm->rm_row[i]); if (rm->rm_nphys_cols) { for (int i = 0; i < rm->rm_nphys_cols; i++) { if (rm->rm_phys_col[i].rc_abd != NULL) abd_free(rm->rm_phys_col[i].rc_abd); } kmem_free(rm->rm_phys_col, sizeof (raidz_col_t) * rm->rm_nphys_cols); } ASSERT3P(rm->rm_lr, ==, NULL); kmem_free(rm, offsetof(raidz_map_t, rm_row[rm->rm_nrows])); } static void vdev_raidz_map_free_vsd(zio_t *zio) { raidz_map_t *rm = zio->io_vsd; vdev_raidz_map_free(rm); } static int vdev_raidz_reflow_compare(const void *x1, const void *x2) { const reflow_node_t *l = x1; const reflow_node_t *r = x2; return (TREE_CMP(l->re_txg, r->re_txg)); } const zio_vsd_ops_t vdev_raidz_vsd_ops = { .vsd_free = vdev_raidz_map_free_vsd, }; raidz_row_t * vdev_raidz_row_alloc(int cols) { raidz_row_t *rr = kmem_zalloc(offsetof(raidz_row_t, rr_col[cols]), KM_SLEEP); rr->rr_cols = cols; rr->rr_scols = cols; for (int c = 0; c < cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; rc->rc_shadow_devidx = INT_MAX; rc->rc_shadow_offset = UINT64_MAX; rc->rc_allow_repair = 1; } return (rr); } static void vdev_raidz_map_alloc_write(zio_t *zio, raidz_map_t *rm, uint64_t ashift) { int c; int nwrapped = 0; uint64_t off = 0; raidz_row_t *rr = rm->rm_row[0]; ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE); ASSERT3U(rm->rm_nrows, ==, 1); /* * Pad any parity columns with additional space to account for skip * sectors. */ if (rm->rm_skipstart < rr->rr_firstdatacol) { ASSERT0(rm->rm_skipstart); nwrapped = rm->rm_nskip; } else if (rr->rr_scols < (rm->rm_skipstart + rm->rm_nskip)) { nwrapped = (rm->rm_skipstart + rm->rm_nskip) % rr->rr_scols; } /* * Optional single skip sectors (rc_size == 0) will be handled in * vdev_raidz_io_start_write(). */ int skipped = rr->rr_scols - rr->rr_cols; /* Allocate buffers for the parity columns */ for (c = 0; c < rr->rr_firstdatacol; c++) { raidz_col_t *rc = &rr->rr_col[c]; /* * Parity columns will pad out a linear ABD to account for * the skip sector. A linear ABD is used here because * parity calculations use the ABD buffer directly to calculate * parity. This avoids doing a memcpy back to the ABD after the * parity has been calculated. By issuing the parity column * with the skip sector we can reduce contention on the child * VDEV queue locks (vq_lock). */ if (c < nwrapped) { rc->rc_abd = abd_alloc_linear( rc->rc_size + (1ULL << ashift), B_FALSE); abd_zero_off(rc->rc_abd, rc->rc_size, 1ULL << ashift); skipped++; } else { rc->rc_abd = abd_alloc_linear(rc->rc_size, B_FALSE); } } for (off = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; abd_t *abd = abd_get_offset_struct(&rc->rc_abdstruct, zio->io_abd, off, rc->rc_size); /* * Generate I/O for skip sectors to improve aggregation * continuity. We will use gang ABD's to reduce contention * on the child VDEV queue locks (vq_lock) by issuing * a single I/O that contains the data and skip sector. * * It is important to make sure that rc_size is not updated * even though we are adding a skip sector to the ABD. When * calculating the parity in vdev_raidz_generate_parity_row() * the rc_size is used to iterate through the ABD's. We can * not have zero'd out skip sectors used for calculating * parity for raidz, because those same sectors are not used * during reconstruction. */ if (c >= rm->rm_skipstart && skipped < rm->rm_nskip) { rc->rc_abd = abd_alloc_gang(); abd_gang_add(rc->rc_abd, abd, B_TRUE); abd_gang_add(rc->rc_abd, abd_get_zeros(1ULL << ashift), B_TRUE); skipped++; } else { rc->rc_abd = abd; } off += rc->rc_size; } ASSERT3U(off, ==, zio->io_size); ASSERT3S(skipped, ==, rm->rm_nskip); } static void vdev_raidz_map_alloc_read(zio_t *zio, raidz_map_t *rm) { int c; raidz_row_t *rr = rm->rm_row[0]; ASSERT3U(rm->rm_nrows, ==, 1); /* Allocate buffers for the parity columns */ for (c = 0; c < rr->rr_firstdatacol; c++) rr->rr_col[c].rc_abd = abd_alloc_linear(rr->rr_col[c].rc_size, B_FALSE); for (uint64_t off = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; rc->rc_abd = abd_get_offset_struct(&rc->rc_abdstruct, zio->io_abd, off, rc->rc_size); off += rc->rc_size; } } /* * Divides the IO evenly across all child vdevs; usually, dcols is * the number of children in the target vdev. * * Avoid inlining the function to keep vdev_raidz_io_start(), which * is this functions only caller, as small as possible on the stack. */ noinline raidz_map_t * vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols, uint64_t nparity) { raidz_row_t *rr; /* The starting RAIDZ (parent) vdev sector of the block. */ uint64_t b = zio->io_offset >> ashift; /* The zio's size in units of the vdev's minimum sector size. */ uint64_t s = zio->io_size >> ashift; /* The first column for this stripe. */ uint64_t f = b % dcols; /* The starting byte offset on each child vdev. */ uint64_t o = (b / dcols) << ashift; uint64_t acols, scols; raidz_map_t *rm = kmem_zalloc(offsetof(raidz_map_t, rm_row[1]), KM_SLEEP); rm->rm_nrows = 1; /* * "Quotient": The number of data sectors for this stripe on all but * the "big column" child vdevs that also contain "remainder" data. */ uint64_t q = s / (dcols - nparity); /* * "Remainder": The number of partial stripe data sectors in this I/O. * This will add a sector to some, but not all, child vdevs. */ uint64_t r = s - q * (dcols - nparity); /* The number of "big columns" - those which contain remainder data. */ uint64_t bc = (r == 0 ? 0 : r + nparity); /* * The total number of data and parity sectors associated with * this I/O. */ uint64_t tot = s + nparity * (q + (r == 0 ? 0 : 1)); /* * acols: The columns that will be accessed. * scols: The columns that will be accessed or skipped. */ if (q == 0) { /* Our I/O request doesn't span all child vdevs. */ acols = bc; scols = MIN(dcols, roundup(bc, nparity + 1)); } else { acols = dcols; scols = dcols; } ASSERT3U(acols, <=, scols); rr = vdev_raidz_row_alloc(scols); rm->rm_row[0] = rr; rr->rr_cols = acols; rr->rr_bigcols = bc; rr->rr_firstdatacol = nparity; #ifdef ZFS_DEBUG rr->rr_offset = zio->io_offset; rr->rr_size = zio->io_size; #endif uint64_t asize = 0; for (uint64_t c = 0; c < scols; c++) { raidz_col_t *rc = &rr->rr_col[c]; uint64_t col = f + c; uint64_t coff = o; if (col >= dcols) { col -= dcols; coff += 1ULL << ashift; } rc->rc_devidx = col; rc->rc_offset = coff; if (c >= acols) rc->rc_size = 0; else if (c < bc) rc->rc_size = (q + 1) << ashift; else rc->rc_size = q << ashift; asize += rc->rc_size; } ASSERT3U(asize, ==, tot << ashift); rm->rm_nskip = roundup(tot, nparity + 1) - tot; rm->rm_skipstart = bc; /* * If all data stored spans all columns, there's a danger that parity * will always be on the same device and, since parity isn't read * during normal operation, that device's I/O bandwidth won't be * used effectively. We therefore switch the parity every 1MB. * * ... at least that was, ostensibly, the theory. As a practical * matter unless we juggle the parity between all devices evenly, we * won't see any benefit. Further, occasional writes that aren't a * multiple of the LCM of the number of children and the minimum * stripe width are sufficient to avoid pessimal behavior. * Unfortunately, this decision created an implicit on-disk format * requirement that we need to support for all eternity, but only * for single-parity RAID-Z. * * If we intend to skip a sector in the zeroth column for padding * we must make sure to note this swap. We will never intend to * skip the first column since at least one data and one parity * column must appear in each row. */ ASSERT(rr->rr_cols >= 2); ASSERT(rr->rr_col[0].rc_size == rr->rr_col[1].rc_size); if (rr->rr_firstdatacol == 1 && (zio->io_offset & (1ULL << 20))) { uint64_t devidx = rr->rr_col[0].rc_devidx; o = rr->rr_col[0].rc_offset; rr->rr_col[0].rc_devidx = rr->rr_col[1].rc_devidx; rr->rr_col[0].rc_offset = rr->rr_col[1].rc_offset; rr->rr_col[1].rc_devidx = devidx; rr->rr_col[1].rc_offset = o; if (rm->rm_skipstart == 0) rm->rm_skipstart = 1; } if (zio->io_type == ZIO_TYPE_WRITE) { vdev_raidz_map_alloc_write(zio, rm, ashift); } else { vdev_raidz_map_alloc_read(zio, rm); } /* init RAIDZ parity ops */ rm->rm_ops = vdev_raidz_math_get_ops(); return (rm); } /* * Everything before reflow_offset_synced should have been moved to the new * location (read and write completed). However, this may not yet be reflected * in the on-disk format (e.g. raidz_reflow_sync() has been called but the * uberblock has not yet been written). If reflow is not in progress, * reflow_offset_synced should be UINT64_MAX. For each row, if the row is * entirely before reflow_offset_synced, it will come from the new location. * Otherwise this row will come from the old location. Therefore, rows that * straddle the reflow_offset_synced will come from the old location. * * For writes, reflow_offset_next is the next offset to copy. If a sector has * been copied, but not yet reflected in the on-disk progress * (reflow_offset_synced), it will also be written to the new (already copied) * offset. */ noinline raidz_map_t * vdev_raidz_map_alloc_expanded(zio_t *zio, uint64_t ashift, uint64_t physical_cols, uint64_t logical_cols, uint64_t nparity, uint64_t reflow_offset_synced, uint64_t reflow_offset_next, boolean_t use_scratch) { abd_t *abd = zio->io_abd; uint64_t offset = zio->io_offset; uint64_t size = zio->io_size; /* The zio's size in units of the vdev's minimum sector size. */ uint64_t s = size >> ashift; /* * "Quotient": The number of data sectors for this stripe on all but * the "big column" child vdevs that also contain "remainder" data. * AKA "full rows" */ uint64_t q = s / (logical_cols - nparity); /* * "Remainder": The number of partial stripe data sectors in this I/O. * This will add a sector to some, but not all, child vdevs. */ uint64_t r = s - q * (logical_cols - nparity); /* The number of "big columns" - those which contain remainder data. */ uint64_t bc = (r == 0 ? 0 : r + nparity); /* * The total number of data and parity sectors associated with * this I/O. */ uint64_t tot = s + nparity * (q + (r == 0 ? 0 : 1)); /* How many rows contain data (not skip) */ uint64_t rows = howmany(tot, logical_cols); int cols = MIN(tot, logical_cols); raidz_map_t *rm = kmem_zalloc(offsetof(raidz_map_t, rm_row[rows]), KM_SLEEP); rm->rm_nrows = rows; rm->rm_nskip = roundup(tot, nparity + 1) - tot; rm->rm_skipstart = bc; uint64_t asize = 0; for (uint64_t row = 0; row < rows; row++) { boolean_t row_use_scratch = B_FALSE; raidz_row_t *rr = vdev_raidz_row_alloc(cols); rm->rm_row[row] = rr; /* The starting RAIDZ (parent) vdev sector of the row. */ uint64_t b = (offset >> ashift) + row * logical_cols; /* * If we are in the middle of a reflow, and the copying has * not yet completed for any part of this row, then use the * old location of this row. Note that reflow_offset_synced * reflects the i/o that's been completed, because it's * updated by a synctask, after zio_wait(spa_txg_zio[]). * This is sufficient for our check, even if that progress * has not yet been recorded to disk (reflected in * spa_ubsync). Also note that we consider the last row to * be "full width" (`cols`-wide rather than `bc`-wide) for * this calculation. This causes a tiny bit of unnecessary * double-writes but is safe and simpler to calculate. */ int row_phys_cols = physical_cols; if (b + cols > reflow_offset_synced >> ashift) row_phys_cols--; else if (use_scratch) row_use_scratch = B_TRUE; /* starting child of this row */ uint64_t child_id = b % row_phys_cols; /* The starting byte offset on each child vdev. */ uint64_t child_offset = (b / row_phys_cols) << ashift; /* * Note, rr_cols is the entire width of the block, even * if this row is shorter. This is needed because parity * generation (for Q and R) needs to know the entire width, * because it treats the short row as though it was * full-width (and the "phantom" sectors were zero-filled). * * Another approach to this would be to set cols shorter * (to just the number of columns that we might do i/o to) * and have another mechanism to tell the parity generation * about the "entire width". Reconstruction (at least * vdev_raidz_reconstruct_general()) would also need to * know about the "entire width". */ rr->rr_firstdatacol = nparity; #ifdef ZFS_DEBUG /* * note: rr_size is PSIZE, not ASIZE */ rr->rr_offset = b << ashift; rr->rr_size = (rr->rr_cols - rr->rr_firstdatacol) << ashift; #endif for (int c = 0; c < rr->rr_cols; c++, child_id++) { if (child_id >= row_phys_cols) { child_id -= row_phys_cols; child_offset += 1ULL << ashift; } raidz_col_t *rc = &rr->rr_col[c]; rc->rc_devidx = child_id; rc->rc_offset = child_offset; /* * Get this from the scratch space if appropriate. * This only happens if we crashed in the middle of * raidz_reflow_scratch_sync() (while it's running, * the rangelock prevents us from doing concurrent * io), and even then only during zpool import or * when the pool is imported readonly. */ if (row_use_scratch) rc->rc_offset -= VDEV_BOOT_SIZE; uint64_t dc = c - rr->rr_firstdatacol; if (c < rr->rr_firstdatacol) { rc->rc_size = 1ULL << ashift; /* * Parity sectors' rc_abd's are set below * after determining if this is an aggregation. */ } else if (row == rows - 1 && bc != 0 && c >= bc) { /* * Past the end of the block (even including * skip sectors). This sector is part of the * map so that we have full rows for p/q parity * generation. */ rc->rc_size = 0; rc->rc_abd = NULL; } else { /* "data column" (col excluding parity) */ uint64_t off; if (c < bc || r == 0) { off = dc * rows + row; } else { off = r * rows + (dc - r) * (rows - 1) + row; } rc->rc_size = 1ULL << ashift; rc->rc_abd = abd_get_offset_struct( &rc->rc_abdstruct, abd, off << ashift, rc->rc_size); } if (rc->rc_size == 0) continue; /* * If any part of this row is in both old and new * locations, the primary location is the old * location. If this sector was already copied to the * new location, we need to also write to the new, * "shadow" location. * * Note, `row_phys_cols != physical_cols` indicates * that the primary location is the old location. * `b+c < reflow_offset_next` indicates that the copy * to the new location has been initiated. We know * that the copy has completed because we have the * rangelock, which is held exclusively while the * copy is in progress. */ if (row_use_scratch || (row_phys_cols != physical_cols && b + c < reflow_offset_next >> ashift)) { rc->rc_shadow_devidx = (b + c) % physical_cols; rc->rc_shadow_offset = ((b + c) / physical_cols) << ashift; if (row_use_scratch) rc->rc_shadow_offset -= VDEV_BOOT_SIZE; } asize += rc->rc_size; } /* * See comment in vdev_raidz_map_alloc() */ if (rr->rr_firstdatacol == 1 && rr->rr_cols > 1 && (offset & (1ULL << 20))) { ASSERT(rr->rr_cols >= 2); ASSERT(rr->rr_col[0].rc_size == rr->rr_col[1].rc_size); int devidx0 = rr->rr_col[0].rc_devidx; uint64_t offset0 = rr->rr_col[0].rc_offset; int shadow_devidx0 = rr->rr_col[0].rc_shadow_devidx; uint64_t shadow_offset0 = rr->rr_col[0].rc_shadow_offset; rr->rr_col[0].rc_devidx = rr->rr_col[1].rc_devidx; rr->rr_col[0].rc_offset = rr->rr_col[1].rc_offset; rr->rr_col[0].rc_shadow_devidx = rr->rr_col[1].rc_shadow_devidx; rr->rr_col[0].rc_shadow_offset = rr->rr_col[1].rc_shadow_offset; rr->rr_col[1].rc_devidx = devidx0; rr->rr_col[1].rc_offset = offset0; rr->rr_col[1].rc_shadow_devidx = shadow_devidx0; rr->rr_col[1].rc_shadow_offset = shadow_offset0; } } ASSERT3U(asize, ==, tot << ashift); /* * Determine if the block is contiguous, in which case we can use * an aggregation. */ if (rows >= raidz_io_aggregate_rows) { rm->rm_nphys_cols = physical_cols; rm->rm_phys_col = kmem_zalloc(sizeof (raidz_col_t) * rm->rm_nphys_cols, KM_SLEEP); /* * Determine the aggregate io's offset and size, and check * that the io is contiguous. */ for (int i = 0; i < rm->rm_nrows && rm->rm_phys_col != NULL; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; raidz_col_t *prc = &rm->rm_phys_col[rc->rc_devidx]; if (rc->rc_size == 0) continue; if (prc->rc_size == 0) { ASSERT0(prc->rc_offset); prc->rc_offset = rc->rc_offset; } else if (prc->rc_offset + prc->rc_size != rc->rc_offset) { /* * This block is not contiguous and * therefore can't be aggregated. * This is expected to be rare, so * the cost of allocating and then * freeing rm_phys_col is not * significant. */ kmem_free(rm->rm_phys_col, sizeof (raidz_col_t) * rm->rm_nphys_cols); rm->rm_phys_col = NULL; rm->rm_nphys_cols = 0; break; } prc->rc_size += rc->rc_size; } } } if (rm->rm_phys_col != NULL) { /* * Allocate aggregate ABD's. */ for (int i = 0; i < rm->rm_nphys_cols; i++) { raidz_col_t *prc = &rm->rm_phys_col[i]; prc->rc_devidx = i; if (prc->rc_size == 0) continue; prc->rc_abd = abd_alloc_linear(rm->rm_phys_col[i].rc_size, B_FALSE); } /* * Point the parity abd's into the aggregate abd's. */ for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_firstdatacol; c++) { raidz_col_t *rc = &rr->rr_col[c]; raidz_col_t *prc = &rm->rm_phys_col[rc->rc_devidx]; rc->rc_abd = abd_get_offset_struct(&rc->rc_abdstruct, prc->rc_abd, rc->rc_offset - prc->rc_offset, rc->rc_size); } } } else { /* * Allocate new abd's for the parity sectors. */ for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_firstdatacol; c++) { raidz_col_t *rc = &rr->rr_col[c]; rc->rc_abd = abd_alloc_linear(rc->rc_size, B_TRUE); } } } /* init RAIDZ parity ops */ rm->rm_ops = vdev_raidz_math_get_ops(); return (rm); } struct pqr_struct { uint64_t *p; uint64_t *q; uint64_t *r; }; static int vdev_raidz_p_func(void *buf, size_t size, void *private) { struct pqr_struct *pqr = private; const uint64_t *src = buf; int cnt = size / sizeof (src[0]); ASSERT(pqr->p && !pqr->q && !pqr->r); for (int i = 0; i < cnt; i++, src++, pqr->p++) *pqr->p ^= *src; return (0); } static int vdev_raidz_pq_func(void *buf, size_t size, void *private) { struct pqr_struct *pqr = private; const uint64_t *src = buf; uint64_t mask; int cnt = size / sizeof (src[0]); ASSERT(pqr->p && pqr->q && !pqr->r); for (int i = 0; i < cnt; i++, src++, pqr->p++, pqr->q++) { *pqr->p ^= *src; VDEV_RAIDZ_64MUL_2(*pqr->q, mask); *pqr->q ^= *src; } return (0); } static int vdev_raidz_pqr_func(void *buf, size_t size, void *private) { struct pqr_struct *pqr = private; const uint64_t *src = buf; uint64_t mask; int cnt = size / sizeof (src[0]); ASSERT(pqr->p && pqr->q && pqr->r); for (int i = 0; i < cnt; i++, src++, pqr->p++, pqr->q++, pqr->r++) { *pqr->p ^= *src; VDEV_RAIDZ_64MUL_2(*pqr->q, mask); *pqr->q ^= *src; VDEV_RAIDZ_64MUL_4(*pqr->r, mask); *pqr->r ^= *src; } return (0); } static void vdev_raidz_generate_parity_p(raidz_row_t *rr) { uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd); for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { abd_t *src = rr->rr_col[c].rc_abd; if (c == rr->rr_firstdatacol) { abd_copy_to_buf(p, src, rr->rr_col[c].rc_size); } else { struct pqr_struct pqr = { p, NULL, NULL }; (void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size, vdev_raidz_p_func, &pqr); } } } static void vdev_raidz_generate_parity_pq(raidz_row_t *rr) { uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd); uint64_t *q = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd); uint64_t pcnt = rr->rr_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]); ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size == rr->rr_col[VDEV_RAIDZ_Q].rc_size); for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { abd_t *src = rr->rr_col[c].rc_abd; uint64_t ccnt = rr->rr_col[c].rc_size / sizeof (p[0]); if (c == rr->rr_firstdatacol) { ASSERT(ccnt == pcnt || ccnt == 0); abd_copy_to_buf(p, src, rr->rr_col[c].rc_size); (void) memcpy(q, p, rr->rr_col[c].rc_size); for (uint64_t i = ccnt; i < pcnt; i++) { p[i] = 0; q[i] = 0; } } else { struct pqr_struct pqr = { p, q, NULL }; ASSERT(ccnt <= pcnt); (void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size, vdev_raidz_pq_func, &pqr); /* * Treat short columns as though they are full of 0s. * Note that there's therefore nothing needed for P. */ uint64_t mask; for (uint64_t i = ccnt; i < pcnt; i++) { VDEV_RAIDZ_64MUL_2(q[i], mask); } } } } static void vdev_raidz_generate_parity_pqr(raidz_row_t *rr) { uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd); uint64_t *q = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd); uint64_t *r = abd_to_buf(rr->rr_col[VDEV_RAIDZ_R].rc_abd); uint64_t pcnt = rr->rr_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]); ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size == rr->rr_col[VDEV_RAIDZ_Q].rc_size); ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size == rr->rr_col[VDEV_RAIDZ_R].rc_size); for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { abd_t *src = rr->rr_col[c].rc_abd; uint64_t ccnt = rr->rr_col[c].rc_size / sizeof (p[0]); if (c == rr->rr_firstdatacol) { ASSERT(ccnt == pcnt || ccnt == 0); abd_copy_to_buf(p, src, rr->rr_col[c].rc_size); (void) memcpy(q, p, rr->rr_col[c].rc_size); (void) memcpy(r, p, rr->rr_col[c].rc_size); for (uint64_t i = ccnt; i < pcnt; i++) { p[i] = 0; q[i] = 0; r[i] = 0; } } else { struct pqr_struct pqr = { p, q, r }; ASSERT(ccnt <= pcnt); (void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size, vdev_raidz_pqr_func, &pqr); /* * Treat short columns as though they are full of 0s. * Note that there's therefore nothing needed for P. */ uint64_t mask; for (uint64_t i = ccnt; i < pcnt; i++) { VDEV_RAIDZ_64MUL_2(q[i], mask); VDEV_RAIDZ_64MUL_4(r[i], mask); } } } } /* * Generate RAID parity in the first virtual columns according to the number of * parity columns available. */ void vdev_raidz_generate_parity_row(raidz_map_t *rm, raidz_row_t *rr) { if (rr->rr_cols == 0) { /* * We are handling this block one row at a time (because * this block has a different logical vs physical width, * due to RAIDZ expansion), and this is a pad-only row, * which has no parity. */ return; } /* Generate using the new math implementation */ if (vdev_raidz_math_generate(rm, rr) != RAIDZ_ORIGINAL_IMPL) return; switch (rr->rr_firstdatacol) { case 1: vdev_raidz_generate_parity_p(rr); break; case 2: vdev_raidz_generate_parity_pq(rr); break; case 3: vdev_raidz_generate_parity_pqr(rr); break; default: cmn_err(CE_PANIC, "invalid RAID-Z configuration"); } } void vdev_raidz_generate_parity(raidz_map_t *rm) { for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; vdev_raidz_generate_parity_row(rm, rr); } } static int vdev_raidz_reconst_p_func(void *dbuf, void *sbuf, size_t size, void *private) { (void) private; uint64_t *dst = dbuf; uint64_t *src = sbuf; int cnt = size / sizeof (src[0]); for (int i = 0; i < cnt; i++) { dst[i] ^= src[i]; } return (0); } static int vdev_raidz_reconst_q_pre_func(void *dbuf, void *sbuf, size_t size, void *private) { (void) private; uint64_t *dst = dbuf; uint64_t *src = sbuf; uint64_t mask; int cnt = size / sizeof (dst[0]); for (int i = 0; i < cnt; i++, dst++, src++) { VDEV_RAIDZ_64MUL_2(*dst, mask); *dst ^= *src; } return (0); } static int vdev_raidz_reconst_q_pre_tail_func(void *buf, size_t size, void *private) { (void) private; uint64_t *dst = buf; uint64_t mask; int cnt = size / sizeof (dst[0]); for (int i = 0; i < cnt; i++, dst++) { /* same operation as vdev_raidz_reconst_q_pre_func() on dst */ VDEV_RAIDZ_64MUL_2(*dst, mask); } return (0); } struct reconst_q_struct { uint64_t *q; int exp; }; static int vdev_raidz_reconst_q_post_func(void *buf, size_t size, void *private) { struct reconst_q_struct *rq = private; uint64_t *dst = buf; int cnt = size / sizeof (dst[0]); for (int i = 0; i < cnt; i++, dst++, rq->q++) { int j; uint8_t *b; *dst ^= *rq->q; for (j = 0, b = (uint8_t *)dst; j < 8; j++, b++) { *b = vdev_raidz_exp2(*b, rq->exp); } } return (0); } struct reconst_pq_struct { uint8_t *p; uint8_t *q; uint8_t *pxy; uint8_t *qxy; int aexp; int bexp; }; static int vdev_raidz_reconst_pq_func(void *xbuf, void *ybuf, size_t size, void *private) { struct reconst_pq_struct *rpq = private; uint8_t *xd = xbuf; uint8_t *yd = ybuf; for (int i = 0; i < size; i++, rpq->p++, rpq->q++, rpq->pxy++, rpq->qxy++, xd++, yd++) { *xd = vdev_raidz_exp2(*rpq->p ^ *rpq->pxy, rpq->aexp) ^ vdev_raidz_exp2(*rpq->q ^ *rpq->qxy, rpq->bexp); *yd = *rpq->p ^ *rpq->pxy ^ *xd; } return (0); } static int vdev_raidz_reconst_pq_tail_func(void *xbuf, size_t size, void *private) { struct reconst_pq_struct *rpq = private; uint8_t *xd = xbuf; for (int i = 0; i < size; i++, rpq->p++, rpq->q++, rpq->pxy++, rpq->qxy++, xd++) { /* same operation as vdev_raidz_reconst_pq_func() on xd */ *xd = vdev_raidz_exp2(*rpq->p ^ *rpq->pxy, rpq->aexp) ^ vdev_raidz_exp2(*rpq->q ^ *rpq->qxy, rpq->bexp); } return (0); } static void vdev_raidz_reconstruct_p(raidz_row_t *rr, int *tgts, int ntgts) { int x = tgts[0]; abd_t *dst, *src; if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) zfs_dbgmsg("reconstruct_p(rm=%px x=%u)", rr, x); ASSERT3U(ntgts, ==, 1); ASSERT3U(x, >=, rr->rr_firstdatacol); ASSERT3U(x, <, rr->rr_cols); ASSERT3U(rr->rr_col[x].rc_size, <=, rr->rr_col[VDEV_RAIDZ_P].rc_size); src = rr->rr_col[VDEV_RAIDZ_P].rc_abd; dst = rr->rr_col[x].rc_abd; abd_copy_from_buf(dst, abd_to_buf(src), rr->rr_col[x].rc_size); for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { uint64_t size = MIN(rr->rr_col[x].rc_size, rr->rr_col[c].rc_size); src = rr->rr_col[c].rc_abd; if (c == x) continue; (void) abd_iterate_func2(dst, src, 0, 0, size, vdev_raidz_reconst_p_func, NULL); } } static void vdev_raidz_reconstruct_q(raidz_row_t *rr, int *tgts, int ntgts) { int x = tgts[0]; int c, exp; abd_t *dst, *src; if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) zfs_dbgmsg("reconstruct_q(rm=%px x=%u)", rr, x); ASSERT(ntgts == 1); ASSERT(rr->rr_col[x].rc_size <= rr->rr_col[VDEV_RAIDZ_Q].rc_size); for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { uint64_t size = (c == x) ? 0 : MIN(rr->rr_col[x].rc_size, rr->rr_col[c].rc_size); src = rr->rr_col[c].rc_abd; dst = rr->rr_col[x].rc_abd; if (c == rr->rr_firstdatacol) { abd_copy(dst, src, size); if (rr->rr_col[x].rc_size > size) { abd_zero_off(dst, size, rr->rr_col[x].rc_size - size); } } else { ASSERT3U(size, <=, rr->rr_col[x].rc_size); (void) abd_iterate_func2(dst, src, 0, 0, size, vdev_raidz_reconst_q_pre_func, NULL); (void) abd_iterate_func(dst, size, rr->rr_col[x].rc_size - size, vdev_raidz_reconst_q_pre_tail_func, NULL); } } src = rr->rr_col[VDEV_RAIDZ_Q].rc_abd; dst = rr->rr_col[x].rc_abd; exp = 255 - (rr->rr_cols - 1 - x); struct reconst_q_struct rq = { abd_to_buf(src), exp }; (void) abd_iterate_func(dst, 0, rr->rr_col[x].rc_size, vdev_raidz_reconst_q_post_func, &rq); } static void vdev_raidz_reconstruct_pq(raidz_row_t *rr, int *tgts, int ntgts) { uint8_t *p, *q, *pxy, *qxy, tmp, a, b, aexp, bexp; abd_t *pdata, *qdata; uint64_t xsize, ysize; int x = tgts[0]; int y = tgts[1]; abd_t *xd, *yd; if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) zfs_dbgmsg("reconstruct_pq(rm=%px x=%u y=%u)", rr, x, y); ASSERT(ntgts == 2); ASSERT(x < y); ASSERT(x >= rr->rr_firstdatacol); ASSERT(y < rr->rr_cols); ASSERT(rr->rr_col[x].rc_size >= rr->rr_col[y].rc_size); /* * Move the parity data aside -- we're going to compute parity as * though columns x and y were full of zeros -- Pxy and Qxy. We want to * reuse the parity generation mechanism without trashing the actual * parity so we make those columns appear to be full of zeros by * setting their lengths to zero. */ pdata = rr->rr_col[VDEV_RAIDZ_P].rc_abd; qdata = rr->rr_col[VDEV_RAIDZ_Q].rc_abd; xsize = rr->rr_col[x].rc_size; ysize = rr->rr_col[y].rc_size; rr->rr_col[VDEV_RAIDZ_P].rc_abd = abd_alloc_linear(rr->rr_col[VDEV_RAIDZ_P].rc_size, B_TRUE); rr->rr_col[VDEV_RAIDZ_Q].rc_abd = abd_alloc_linear(rr->rr_col[VDEV_RAIDZ_Q].rc_size, B_TRUE); rr->rr_col[x].rc_size = 0; rr->rr_col[y].rc_size = 0; vdev_raidz_generate_parity_pq(rr); rr->rr_col[x].rc_size = xsize; rr->rr_col[y].rc_size = ysize; p = abd_to_buf(pdata); q = abd_to_buf(qdata); pxy = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd); qxy = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd); xd = rr->rr_col[x].rc_abd; yd = rr->rr_col[y].rc_abd; /* * We now have: * Pxy = P + D_x + D_y * Qxy = Q + 2^(ndevs - 1 - x) * D_x + 2^(ndevs - 1 - y) * D_y * * We can then solve for D_x: * D_x = A * (P + Pxy) + B * (Q + Qxy) * where * A = 2^(x - y) * (2^(x - y) + 1)^-1 * B = 2^(ndevs - 1 - x) * (2^(x - y) + 1)^-1 * * With D_x in hand, we can easily solve for D_y: * D_y = P + Pxy + D_x */ a = vdev_raidz_pow2[255 + x - y]; b = vdev_raidz_pow2[255 - (rr->rr_cols - 1 - x)]; tmp = 255 - vdev_raidz_log2[a ^ 1]; aexp = vdev_raidz_log2[vdev_raidz_exp2(a, tmp)]; bexp = vdev_raidz_log2[vdev_raidz_exp2(b, tmp)]; ASSERT3U(xsize, >=, ysize); struct reconst_pq_struct rpq = { p, q, pxy, qxy, aexp, bexp }; (void) abd_iterate_func2(xd, yd, 0, 0, ysize, vdev_raidz_reconst_pq_func, &rpq); (void) abd_iterate_func(xd, ysize, xsize - ysize, vdev_raidz_reconst_pq_tail_func, &rpq); abd_free(rr->rr_col[VDEV_RAIDZ_P].rc_abd); abd_free(rr->rr_col[VDEV_RAIDZ_Q].rc_abd); /* * Restore the saved parity data. */ rr->rr_col[VDEV_RAIDZ_P].rc_abd = pdata; rr->rr_col[VDEV_RAIDZ_Q].rc_abd = qdata; } /* * In the general case of reconstruction, we must solve the system of linear * equations defined by the coefficients used to generate parity as well as * the contents of the data and parity disks. This can be expressed with * vectors for the original data (D) and the actual data (d) and parity (p) * and a matrix composed of the identity matrix (I) and a dispersal matrix (V): * * __ __ __ __ * | | __ __ | p_0 | * | V | | D_0 | | p_m-1 | * | | x | : | = | d_0 | * | I | | D_n-1 | | : | * | | ~~ ~~ | d_n-1 | * ~~ ~~ ~~ ~~ * * I is simply a square identity matrix of size n, and V is a vandermonde * matrix defined by the coefficients we chose for the various parity columns * (1, 2, 4). Note that these values were chosen both for simplicity, speedy * computation as well as linear separability. * * __ __ __ __ * | 1 .. 1 1 1 | | p_0 | * | 2^n-1 .. 4 2 1 | __ __ | : | * | 4^n-1 .. 16 4 1 | | D_0 | | p_m-1 | * | 1 .. 0 0 0 | | D_1 | | d_0 | * | 0 .. 0 0 0 | x | D_2 | = | d_1 | * | : : : : | | : | | d_2 | * | 0 .. 1 0 0 | | D_n-1 | | : | * | 0 .. 0 1 0 | ~~ ~~ | : | * | 0 .. 0 0 1 | | d_n-1 | * ~~ ~~ ~~ ~~ * * Note that I, V, d, and p are known. To compute D, we must invert the * matrix and use the known data and parity values to reconstruct the unknown * data values. We begin by removing the rows in V|I and d|p that correspond * to failed or missing columns; we then make V|I square (n x n) and d|p * sized n by removing rows corresponding to unused parity from the bottom up * to generate (V|I)' and (d|p)'. We can then generate the inverse of (V|I)' * using Gauss-Jordan elimination. In the example below we use m=3 parity * columns, n=8 data columns, with errors in d_1, d_2, and p_1: * __ __ * | 1 1 1 1 1 1 1 1 | * | 128 64 32 16 8 4 2 1 | <-----+-+-- missing disks * | 19 205 116 29 64 16 4 1 | / / * | 1 0 0 0 0 0 0 0 | / / * | 0 1 0 0 0 0 0 0 | <--' / * (V|I) = | 0 0 1 0 0 0 0 0 | <---' * | 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 1 1 1 1 1 1 1 | * | 128 64 32 16 8 4 2 1 | * | 19 205 116 29 64 16 4 1 | * | 1 0 0 0 0 0 0 0 | * | 0 1 0 0 0 0 0 0 | * (V|I)' = | 0 0 1 0 0 0 0 0 | * | 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 | * ~~ ~~ * * Here we employ Gauss-Jordan elimination to find the inverse of (V|I)'. We * have carefully chosen the seed values 1, 2, and 4 to ensure that this * matrix is not singular. * __ __ * | 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 | * | 19 205 116 29 64 16 4 1 0 1 0 0 0 0 0 0 | * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 | * | 19 205 116 29 64 16 4 1 0 1 0 0 0 0 0 0 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 0 1 1 0 0 0 0 0 1 0 1 1 1 1 1 1 | * | 0 205 116 0 0 0 0 0 0 1 19 29 64 16 4 1 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 0 1 1 0 0 0 0 0 1 0 1 1 1 1 1 1 | * | 0 0 185 0 0 0 0 0 205 1 222 208 141 221 201 204 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 0 1 1 0 0 0 0 0 1 0 1 1 1 1 1 1 | * | 0 0 1 0 0 0 0 0 166 100 4 40 158 168 216 209 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 | * | 0 1 0 0 0 0 0 0 167 100 5 41 159 169 217 208 | * | 0 0 1 0 0 0 0 0 166 100 4 40 158 168 216 209 | * | 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 | * ~~ ~~ * __ __ * | 0 0 1 0 0 0 0 0 | * | 167 100 5 41 159 169 217 208 | * | 166 100 4 40 158 168 216 209 | * (V|I)'^-1 = | 0 0 0 1 0 0 0 0 | * | 0 0 0 0 1 0 0 0 | * | 0 0 0 0 0 1 0 0 | * | 0 0 0 0 0 0 1 0 | * | 0 0 0 0 0 0 0 1 | * ~~ ~~ * * We can then simply compute D = (V|I)'^-1 x (d|p)' to discover the values * of the missing data. * * As is apparent from the example above, the only non-trivial rows in the * inverse matrix correspond to the data disks that we're trying to * reconstruct. Indeed, those are the only rows we need as the others would * only be useful for reconstructing data known or assumed to be valid. For * that reason, we only build the coefficients in the rows that correspond to * targeted columns. */ static void vdev_raidz_matrix_init(raidz_row_t *rr, int n, int nmap, int *map, uint8_t **rows) { int i, j; int pow; ASSERT(n == rr->rr_cols - rr->rr_firstdatacol); /* * Fill in the missing rows of interest. */ for (i = 0; i < nmap; i++) { ASSERT3S(0, <=, map[i]); ASSERT3S(map[i], <=, 2); pow = map[i] * n; if (pow > 255) pow -= 255; ASSERT(pow <= 255); for (j = 0; j < n; j++) { pow -= map[i]; if (pow < 0) pow += 255; rows[i][j] = vdev_raidz_pow2[pow]; } } } static void vdev_raidz_matrix_invert(raidz_row_t *rr, int n, int nmissing, int *missing, uint8_t **rows, uint8_t **invrows, const uint8_t *used) { int i, j, ii, jj; uint8_t log; /* * Assert that the first nmissing entries from the array of used * columns correspond to parity columns and that subsequent entries * correspond to data columns. */ for (i = 0; i < nmissing; i++) { ASSERT3S(used[i], <, rr->rr_firstdatacol); } for (; i < n; i++) { ASSERT3S(used[i], >=, rr->rr_firstdatacol); } /* * First initialize the storage where we'll compute the inverse rows. */ for (i = 0; i < nmissing; i++) { for (j = 0; j < n; j++) { invrows[i][j] = (i == j) ? 1 : 0; } } /* * Subtract all trivial rows from the rows of consequence. */ for (i = 0; i < nmissing; i++) { for (j = nmissing; j < n; j++) { ASSERT3U(used[j], >=, rr->rr_firstdatacol); jj = used[j] - rr->rr_firstdatacol; ASSERT3S(jj, <, n); invrows[i][j] = rows[i][jj]; rows[i][jj] = 0; } } /* * For each of the rows of interest, we must normalize it and subtract * a multiple of it from the other rows. */ for (i = 0; i < nmissing; i++) { for (j = 0; j < missing[i]; j++) { ASSERT0(rows[i][j]); } ASSERT3U(rows[i][missing[i]], !=, 0); /* * Compute the inverse of the first element and multiply each * element in the row by that value. */ log = 255 - vdev_raidz_log2[rows[i][missing[i]]]; for (j = 0; j < n; j++) { rows[i][j] = vdev_raidz_exp2(rows[i][j], log); invrows[i][j] = vdev_raidz_exp2(invrows[i][j], log); } for (ii = 0; ii < nmissing; ii++) { if (i == ii) continue; ASSERT3U(rows[ii][missing[i]], !=, 0); log = vdev_raidz_log2[rows[ii][missing[i]]]; for (j = 0; j < n; j++) { rows[ii][j] ^= vdev_raidz_exp2(rows[i][j], log); invrows[ii][j] ^= vdev_raidz_exp2(invrows[i][j], log); } } } /* * Verify that the data that is left in the rows are properly part of * an identity matrix. */ for (i = 0; i < nmissing; i++) { for (j = 0; j < n; j++) { if (j == missing[i]) { ASSERT3U(rows[i][j], ==, 1); } else { ASSERT0(rows[i][j]); } } } } static void vdev_raidz_matrix_reconstruct(raidz_row_t *rr, int n, int nmissing, int *missing, uint8_t **invrows, const uint8_t *used) { int i, j, x, cc, c; uint8_t *src; uint64_t ccount; uint8_t *dst[VDEV_RAIDZ_MAXPARITY] = { NULL }; uint64_t dcount[VDEV_RAIDZ_MAXPARITY] = { 0 }; uint8_t log = 0; uint8_t val; int ll; uint8_t *invlog[VDEV_RAIDZ_MAXPARITY]; uint8_t *p, *pp; size_t psize; psize = sizeof (invlog[0][0]) * n * nmissing; p = kmem_alloc(psize, KM_SLEEP); for (pp = p, i = 0; i < nmissing; i++) { invlog[i] = pp; pp += n; } for (i = 0; i < nmissing; i++) { for (j = 0; j < n; j++) { ASSERT3U(invrows[i][j], !=, 0); invlog[i][j] = vdev_raidz_log2[invrows[i][j]]; } } for (i = 0; i < n; i++) { c = used[i]; ASSERT3U(c, <, rr->rr_cols); ccount = rr->rr_col[c].rc_size; ASSERT(ccount >= rr->rr_col[missing[0]].rc_size || i > 0); if (ccount == 0) continue; src = abd_to_buf(rr->rr_col[c].rc_abd); for (j = 0; j < nmissing; j++) { cc = missing[j] + rr->rr_firstdatacol; ASSERT3U(cc, >=, rr->rr_firstdatacol); ASSERT3U(cc, <, rr->rr_cols); ASSERT3U(cc, !=, c); dcount[j] = rr->rr_col[cc].rc_size; if (dcount[j] != 0) dst[j] = abd_to_buf(rr->rr_col[cc].rc_abd); } for (x = 0; x < ccount; x++, src++) { if (*src != 0) log = vdev_raidz_log2[*src]; for (cc = 0; cc < nmissing; cc++) { if (x >= dcount[cc]) continue; if (*src == 0) { val = 0; } else { if ((ll = log + invlog[cc][i]) >= 255) ll -= 255; val = vdev_raidz_pow2[ll]; } if (i == 0) dst[cc][x] = val; else dst[cc][x] ^= val; } } } kmem_free(p, psize); } static void vdev_raidz_reconstruct_general(raidz_row_t *rr, int *tgts, int ntgts) { - int n, i, c, t, tt; - int nmissing_rows; + int i, c, t, tt; + unsigned int n; + unsigned int nmissing_rows; int missing_rows[VDEV_RAIDZ_MAXPARITY]; int parity_map[VDEV_RAIDZ_MAXPARITY]; uint8_t *p, *pp; size_t psize; uint8_t *rows[VDEV_RAIDZ_MAXPARITY]; uint8_t *invrows[VDEV_RAIDZ_MAXPARITY]; uint8_t *used; abd_t **bufs = NULL; if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) zfs_dbgmsg("reconstruct_general(rm=%px ntgts=%u)", rr, ntgts); /* * Matrix reconstruction can't use scatter ABDs yet, so we allocate * temporary linear ABDs if any non-linear ABDs are found. */ for (i = rr->rr_firstdatacol; i < rr->rr_cols; i++) { ASSERT(rr->rr_col[i].rc_abd != NULL); if (!abd_is_linear(rr->rr_col[i].rc_abd)) { bufs = kmem_alloc(rr->rr_cols * sizeof (abd_t *), KM_PUSHPAGE); for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { raidz_col_t *col = &rr->rr_col[c]; bufs[c] = col->rc_abd; if (bufs[c] != NULL) { col->rc_abd = abd_alloc_linear( col->rc_size, B_TRUE); abd_copy(col->rc_abd, bufs[c], col->rc_size); } } break; } } n = rr->rr_cols - rr->rr_firstdatacol; /* * Figure out which data columns are missing. */ nmissing_rows = 0; for (t = 0; t < ntgts; t++) { if (tgts[t] >= rr->rr_firstdatacol) { missing_rows[nmissing_rows++] = tgts[t] - rr->rr_firstdatacol; } } /* * Figure out which parity columns to use to help generate the missing * data columns. */ for (tt = 0, c = 0, i = 0; i < nmissing_rows; c++) { ASSERT(tt < ntgts); ASSERT(c < rr->rr_firstdatacol); /* * Skip any targeted parity columns. */ if (c == tgts[tt]) { tt++; continue; } parity_map[i] = c; i++; } psize = (sizeof (rows[0][0]) + sizeof (invrows[0][0])) * nmissing_rows * n + sizeof (used[0]) * n; p = kmem_alloc(psize, KM_SLEEP); for (pp = p, i = 0; i < nmissing_rows; i++) { rows[i] = pp; pp += n; invrows[i] = pp; pp += n; } used = pp; for (i = 0; i < nmissing_rows; i++) { used[i] = parity_map[i]; } for (tt = 0, c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { if (tt < nmissing_rows && c == missing_rows[tt] + rr->rr_firstdatacol) { tt++; continue; } ASSERT3S(i, <, n); used[i] = c; i++; } /* * Initialize the interesting rows of the matrix. */ vdev_raidz_matrix_init(rr, n, nmissing_rows, parity_map, rows); /* * Invert the matrix. */ vdev_raidz_matrix_invert(rr, n, nmissing_rows, missing_rows, rows, invrows, used); /* * Reconstruct the missing data using the generated matrix. */ vdev_raidz_matrix_reconstruct(rr, n, nmissing_rows, missing_rows, invrows, used); kmem_free(p, psize); /* * copy back from temporary linear abds and free them */ if (bufs) { for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { raidz_col_t *col = &rr->rr_col[c]; if (bufs[c] != NULL) { abd_copy(bufs[c], col->rc_abd, col->rc_size); abd_free(col->rc_abd); } col->rc_abd = bufs[c]; } kmem_free(bufs, rr->rr_cols * sizeof (abd_t *)); } } static void vdev_raidz_reconstruct_row(raidz_map_t *rm, raidz_row_t *rr, const int *t, int nt) { int tgts[VDEV_RAIDZ_MAXPARITY], *dt; int ntgts; int i, c, ret; int nbadparity, nbaddata; int parity_valid[VDEV_RAIDZ_MAXPARITY]; if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) { zfs_dbgmsg("reconstruct(rm=%px nt=%u cols=%u md=%u mp=%u)", rr, nt, (int)rr->rr_cols, (int)rr->rr_missingdata, (int)rr->rr_missingparity); } nbadparity = rr->rr_firstdatacol; nbaddata = rr->rr_cols - nbadparity; ntgts = 0; for (i = 0, c = 0; c < rr->rr_cols; c++) { if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) { zfs_dbgmsg("reconstruct(rm=%px col=%u devid=%u " "offset=%llx error=%u)", rr, c, (int)rr->rr_col[c].rc_devidx, (long long)rr->rr_col[c].rc_offset, (int)rr->rr_col[c].rc_error); } if (c < rr->rr_firstdatacol) parity_valid[c] = B_FALSE; if (i < nt && c == t[i]) { tgts[ntgts++] = c; i++; } else if (rr->rr_col[c].rc_error != 0) { tgts[ntgts++] = c; } else if (c >= rr->rr_firstdatacol) { nbaddata--; } else { parity_valid[c] = B_TRUE; nbadparity--; } } ASSERT(ntgts >= nt); ASSERT(nbaddata >= 0); ASSERT(nbaddata + nbadparity == ntgts); dt = &tgts[nbadparity]; /* Reconstruct using the new math implementation */ ret = vdev_raidz_math_reconstruct(rm, rr, parity_valid, dt, nbaddata); if (ret != RAIDZ_ORIGINAL_IMPL) return; /* * See if we can use any of our optimized reconstruction routines. */ switch (nbaddata) { case 1: if (parity_valid[VDEV_RAIDZ_P]) { vdev_raidz_reconstruct_p(rr, dt, 1); return; } ASSERT(rr->rr_firstdatacol > 1); if (parity_valid[VDEV_RAIDZ_Q]) { vdev_raidz_reconstruct_q(rr, dt, 1); return; } ASSERT(rr->rr_firstdatacol > 2); break; case 2: ASSERT(rr->rr_firstdatacol > 1); if (parity_valid[VDEV_RAIDZ_P] && parity_valid[VDEV_RAIDZ_Q]) { vdev_raidz_reconstruct_pq(rr, dt, 2); return; } ASSERT(rr->rr_firstdatacol > 2); break; } vdev_raidz_reconstruct_general(rr, tgts, ntgts); } static int vdev_raidz_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize, uint64_t *logical_ashift, uint64_t *physical_ashift) { vdev_raidz_t *vdrz = vd->vdev_tsd; uint64_t nparity = vdrz->vd_nparity; int c; int lasterror = 0; int numerrors = 0; ASSERT(nparity > 0); if (nparity > VDEV_RAIDZ_MAXPARITY || vd->vdev_children < nparity + 1) { vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL; return (SET_ERROR(EINVAL)); } vdev_open_children(vd); for (c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; if (cvd->vdev_open_error != 0) { lasterror = cvd->vdev_open_error; numerrors++; continue; } *asize = MIN(*asize - 1, cvd->vdev_asize - 1) + 1; *max_asize = MIN(*max_asize - 1, cvd->vdev_max_asize - 1) + 1; *logical_ashift = MAX(*logical_ashift, cvd->vdev_ashift); } for (c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; if (cvd->vdev_open_error != 0) continue; *physical_ashift = vdev_best_ashift(*logical_ashift, *physical_ashift, cvd->vdev_physical_ashift); } if (vd->vdev_rz_expanding) { *asize *= vd->vdev_children - 1; *max_asize *= vd->vdev_children - 1; vd->vdev_min_asize = *asize; } else { *asize *= vd->vdev_children; *max_asize *= vd->vdev_children; } if (numerrors > nparity) { vd->vdev_stat.vs_aux = VDEV_AUX_NO_REPLICAS; return (lasterror); } return (0); } static void vdev_raidz_close(vdev_t *vd) { for (int c = 0; c < vd->vdev_children; c++) { if (vd->vdev_child[c] != NULL) vdev_close(vd->vdev_child[c]); } } /* * Return the logical width to use, given the txg in which the allocation * happened. Note that BP_GET_BIRTH() is usually the txg in which the * BP was allocated. Remapped BP's (that were relocated due to device * removal, see remap_blkptr_cb()), will have a more recent physical birth * which reflects when the BP was relocated, but we can ignore these because * they can't be on RAIDZ (device removal doesn't support RAIDZ). */ static uint64_t vdev_raidz_get_logical_width(vdev_raidz_t *vdrz, uint64_t txg) { reflow_node_t lookup = { .re_txg = txg, }; avl_index_t where; uint64_t width; mutex_enter(&vdrz->vd_expand_lock); reflow_node_t *re = avl_find(&vdrz->vd_expand_txgs, &lookup, &where); if (re != NULL) { width = re->re_logical_width; } else { re = avl_nearest(&vdrz->vd_expand_txgs, where, AVL_BEFORE); if (re != NULL) width = re->re_logical_width; else width = vdrz->vd_original_width; } mutex_exit(&vdrz->vd_expand_lock); return (width); } /* * Note: If the RAIDZ vdev has been expanded, older BP's may have allocated * more space due to the lower data-to-parity ratio. In this case it's * important to pass in the correct txg. Note that vdev_gang_header_asize() * relies on a constant asize for psize=SPA_GANGBLOCKSIZE=SPA_MINBLOCKSIZE, * regardless of txg. This is assured because for a single data sector, we * allocate P+1 sectors regardless of width ("cols", which is at least P+1). */ static uint64_t vdev_raidz_asize(vdev_t *vd, uint64_t psize, uint64_t txg) { vdev_raidz_t *vdrz = vd->vdev_tsd; uint64_t asize; uint64_t ashift = vd->vdev_top->vdev_ashift; uint64_t cols = vdrz->vd_original_width; uint64_t nparity = vdrz->vd_nparity; cols = vdev_raidz_get_logical_width(vdrz, txg); asize = ((psize - 1) >> ashift) + 1; asize += nparity * ((asize + cols - nparity - 1) / (cols - nparity)); asize = roundup(asize, nparity + 1) << ashift; #ifdef ZFS_DEBUG uint64_t asize_new = ((psize - 1) >> ashift) + 1; uint64_t ncols_new = vdrz->vd_physical_width; asize_new += nparity * ((asize_new + ncols_new - nparity - 1) / (ncols_new - nparity)); asize_new = roundup(asize_new, nparity + 1) << ashift; VERIFY3U(asize_new, <=, asize); #endif return (asize); } /* * The allocatable space for a raidz vdev is N * sizeof(smallest child) * so each child must provide at least 1/Nth of its asize. */ static uint64_t vdev_raidz_min_asize(vdev_t *vd) { return ((vd->vdev_min_asize + vd->vdev_children - 1) / vd->vdev_children); } void vdev_raidz_child_done(zio_t *zio) { raidz_col_t *rc = zio->io_private; ASSERT3P(rc->rc_abd, !=, NULL); rc->rc_error = zio->io_error; rc->rc_tried = 1; rc->rc_skipped = 0; } static void vdev_raidz_shadow_child_done(zio_t *zio) { raidz_col_t *rc = zio->io_private; rc->rc_shadow_error = zio->io_error; } static void vdev_raidz_io_verify(zio_t *zio, raidz_map_t *rm, raidz_row_t *rr, int col) { (void) rm; #ifdef ZFS_DEBUG range_seg64_t logical_rs, physical_rs, remain_rs; logical_rs.rs_start = rr->rr_offset; logical_rs.rs_end = logical_rs.rs_start + vdev_raidz_asize(zio->io_vd, rr->rr_size, BP_GET_BIRTH(zio->io_bp)); raidz_col_t *rc = &rr->rr_col[col]; vdev_t *cvd = zio->io_vd->vdev_child[rc->rc_devidx]; vdev_xlate(cvd, &logical_rs, &physical_rs, &remain_rs); ASSERT(vdev_xlate_is_empty(&remain_rs)); if (vdev_xlate_is_empty(&physical_rs)) { /* * If we are in the middle of expansion, the * physical->logical mapping is changing so vdev_xlate() * can't give us a reliable answer. */ return; } ASSERT3U(rc->rc_offset, ==, physical_rs.rs_start); ASSERT3U(rc->rc_offset, <, physical_rs.rs_end); /* * It would be nice to assert that rs_end is equal * to rc_offset + rc_size but there might be an * optional I/O at the end that is not accounted in * rc_size. */ if (physical_rs.rs_end > rc->rc_offset + rc->rc_size) { ASSERT3U(physical_rs.rs_end, ==, rc->rc_offset + rc->rc_size + (1 << zio->io_vd->vdev_top->vdev_ashift)); } else { ASSERT3U(physical_rs.rs_end, ==, rc->rc_offset + rc->rc_size); } #endif } static void vdev_raidz_io_start_write(zio_t *zio, raidz_row_t *rr) { vdev_t *vd = zio->io_vd; raidz_map_t *rm = zio->io_vsd; vdev_raidz_generate_parity_row(rm, rr); for (int c = 0; c < rr->rr_scols; c++) { raidz_col_t *rc = &rr->rr_col[c]; vdev_t *cvd = vd->vdev_child[rc->rc_devidx]; /* Verify physical to logical translation */ vdev_raidz_io_verify(zio, rm, rr, c); if (rc->rc_size == 0) continue; ASSERT3U(rc->rc_offset + rc->rc_size, <, cvd->vdev_psize - VDEV_LABEL_END_SIZE); ASSERT3P(rc->rc_abd, !=, NULL); zio_nowait(zio_vdev_child_io(zio, NULL, cvd, rc->rc_offset, rc->rc_abd, abd_get_size(rc->rc_abd), zio->io_type, zio->io_priority, 0, vdev_raidz_child_done, rc)); if (rc->rc_shadow_devidx != INT_MAX) { vdev_t *cvd2 = vd->vdev_child[rc->rc_shadow_devidx]; ASSERT3U( rc->rc_shadow_offset + abd_get_size(rc->rc_abd), <, cvd2->vdev_psize - VDEV_LABEL_END_SIZE); zio_nowait(zio_vdev_child_io(zio, NULL, cvd2, rc->rc_shadow_offset, rc->rc_abd, abd_get_size(rc->rc_abd), zio->io_type, zio->io_priority, 0, vdev_raidz_shadow_child_done, rc)); } } } /* * Generate optional I/Os for skip sectors to improve aggregation contiguity. * This only works for vdev_raidz_map_alloc() (not _expanded()). */ static void raidz_start_skip_writes(zio_t *zio) { vdev_t *vd = zio->io_vd; uint64_t ashift = vd->vdev_top->vdev_ashift; raidz_map_t *rm = zio->io_vsd; ASSERT3U(rm->rm_nrows, ==, 1); raidz_row_t *rr = rm->rm_row[0]; for (int c = 0; c < rr->rr_scols; c++) { raidz_col_t *rc = &rr->rr_col[c]; vdev_t *cvd = vd->vdev_child[rc->rc_devidx]; if (rc->rc_size != 0) continue; ASSERT3P(rc->rc_abd, ==, NULL); ASSERT3U(rc->rc_offset, <, cvd->vdev_psize - VDEV_LABEL_END_SIZE); zio_nowait(zio_vdev_child_io(zio, NULL, cvd, rc->rc_offset, NULL, 1ULL << ashift, zio->io_type, zio->io_priority, ZIO_FLAG_NODATA | ZIO_FLAG_OPTIONAL, NULL, NULL)); } } static void vdev_raidz_io_start_read_row(zio_t *zio, raidz_row_t *rr, boolean_t forceparity) { vdev_t *vd = zio->io_vd; /* * Iterate over the columns in reverse order so that we hit the parity * last -- any errors along the way will force us to read the parity. */ for (int c = rr->rr_cols - 1; c >= 0; c--) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_size == 0) continue; vdev_t *cvd = vd->vdev_child[rc->rc_devidx]; if (!vdev_readable(cvd)) { if (c >= rr->rr_firstdatacol) rr->rr_missingdata++; else rr->rr_missingparity++; rc->rc_error = SET_ERROR(ENXIO); rc->rc_tried = 1; /* don't even try */ rc->rc_skipped = 1; continue; } if (vdev_dtl_contains(cvd, DTL_MISSING, zio->io_txg, 1)) { if (c >= rr->rr_firstdatacol) rr->rr_missingdata++; else rr->rr_missingparity++; rc->rc_error = SET_ERROR(ESTALE); rc->rc_skipped = 1; continue; } if (forceparity || c >= rr->rr_firstdatacol || rr->rr_missingdata > 0 || (zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER))) { zio_nowait(zio_vdev_child_io(zio, NULL, cvd, rc->rc_offset, rc->rc_abd, rc->rc_size, zio->io_type, zio->io_priority, 0, vdev_raidz_child_done, rc)); } } } static void vdev_raidz_io_start_read_phys_cols(zio_t *zio, raidz_map_t *rm) { vdev_t *vd = zio->io_vd; for (int i = 0; i < rm->rm_nphys_cols; i++) { raidz_col_t *prc = &rm->rm_phys_col[i]; if (prc->rc_size == 0) continue; ASSERT3U(prc->rc_devidx, ==, i); vdev_t *cvd = vd->vdev_child[i]; if (!vdev_readable(cvd)) { prc->rc_error = SET_ERROR(ENXIO); prc->rc_tried = 1; /* don't even try */ prc->rc_skipped = 1; continue; } if (vdev_dtl_contains(cvd, DTL_MISSING, zio->io_txg, 1)) { prc->rc_error = SET_ERROR(ESTALE); prc->rc_skipped = 1; continue; } zio_nowait(zio_vdev_child_io(zio, NULL, cvd, prc->rc_offset, prc->rc_abd, prc->rc_size, zio->io_type, zio->io_priority, 0, vdev_raidz_child_done, prc)); } } static void vdev_raidz_io_start_read(zio_t *zio, raidz_map_t *rm) { /* * If there are multiple rows, we will be hitting * all disks, so go ahead and read the parity so * that we are reading in decent size chunks. */ boolean_t forceparity = rm->rm_nrows > 1; if (rm->rm_phys_col) { vdev_raidz_io_start_read_phys_cols(zio, rm); } else { for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; vdev_raidz_io_start_read_row(zio, rr, forceparity); } } } /* * Start an IO operation on a RAIDZ VDev * * Outline: * - For write operations: * 1. Generate the parity data * 2. Create child zio write operations to each column's vdev, for both * data and parity. * 3. If the column skips any sectors for padding, create optional dummy * write zio children for those areas to improve aggregation continuity. * - For read operations: * 1. Create child zio read operations to each data column's vdev to read * the range of data required for zio. * 2. If this is a scrub or resilver operation, or if any of the data * vdevs have had errors, then create zio read operations to the parity * columns' VDevs as well. */ static void vdev_raidz_io_start(zio_t *zio) { vdev_t *vd = zio->io_vd; vdev_t *tvd = vd->vdev_top; vdev_raidz_t *vdrz = vd->vdev_tsd; raidz_map_t *rm; uint64_t logical_width = vdev_raidz_get_logical_width(vdrz, BP_GET_BIRTH(zio->io_bp)); if (logical_width != vdrz->vd_physical_width) { zfs_locked_range_t *lr = NULL; uint64_t synced_offset = UINT64_MAX; uint64_t next_offset = UINT64_MAX; boolean_t use_scratch = B_FALSE; /* * Note: when the expansion is completing, we set * vre_state=DSS_FINISHED (in raidz_reflow_complete_sync()) * in a later txg than when we last update spa_ubsync's state * (see the end of spa_raidz_expand_thread()). Therefore we * may see vre_state!=SCANNING before * VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE=DSS_FINISHED is reflected * on disk, but the copying progress has been synced to disk * (and reflected in spa_ubsync). In this case it's fine to * treat the expansion as completed, since if we crash there's * no additional copying to do. */ if (vdrz->vn_vre.vre_state == DSS_SCANNING) { ASSERT3P(vd->vdev_spa->spa_raidz_expand, ==, &vdrz->vn_vre); lr = zfs_rangelock_enter(&vdrz->vn_vre.vre_rangelock, zio->io_offset, zio->io_size, RL_READER); use_scratch = (RRSS_GET_STATE(&vd->vdev_spa->spa_ubsync) == RRSS_SCRATCH_VALID); synced_offset = RRSS_GET_OFFSET(&vd->vdev_spa->spa_ubsync); next_offset = vdrz->vn_vre.vre_offset; /* * If we haven't resumed expanding since importing the * pool, vre_offset won't have been set yet. In * this case the next offset to be copied is the same * as what was synced. */ if (next_offset == UINT64_MAX) { next_offset = synced_offset; } } if (use_scratch) { zfs_dbgmsg("zio=%px %s io_offset=%llu offset_synced=" "%lld next_offset=%lld use_scratch=%u", zio, zio->io_type == ZIO_TYPE_WRITE ? "WRITE" : "READ", (long long)zio->io_offset, (long long)synced_offset, (long long)next_offset, use_scratch); } rm = vdev_raidz_map_alloc_expanded(zio, tvd->vdev_ashift, vdrz->vd_physical_width, logical_width, vdrz->vd_nparity, synced_offset, next_offset, use_scratch); rm->rm_lr = lr; } else { rm = vdev_raidz_map_alloc(zio, tvd->vdev_ashift, logical_width, vdrz->vd_nparity); } rm->rm_original_width = vdrz->vd_original_width; zio->io_vsd = rm; zio->io_vsd_ops = &vdev_raidz_vsd_ops; if (zio->io_type == ZIO_TYPE_WRITE) { for (int i = 0; i < rm->rm_nrows; i++) { vdev_raidz_io_start_write(zio, rm->rm_row[i]); } if (logical_width == vdrz->vd_physical_width) { raidz_start_skip_writes(zio); } } else { ASSERT(zio->io_type == ZIO_TYPE_READ); vdev_raidz_io_start_read(zio, rm); } zio_execute(zio); } /* * Report a checksum error for a child of a RAID-Z device. */ void vdev_raidz_checksum_error(zio_t *zio, raidz_col_t *rc, abd_t *bad_data) { vdev_t *vd = zio->io_vd->vdev_child[rc->rc_devidx]; if (!(zio->io_flags & ZIO_FLAG_SPECULATIVE) && zio->io_priority != ZIO_PRIORITY_REBUILD) { zio_bad_cksum_t zbc; raidz_map_t *rm = zio->io_vsd; zbc.zbc_has_cksum = 0; zbc.zbc_injected = rm->rm_ecksuminjected; mutex_enter(&vd->vdev_stat_lock); vd->vdev_stat.vs_checksum_errors++; mutex_exit(&vd->vdev_stat_lock); (void) zfs_ereport_post_checksum(zio->io_spa, vd, &zio->io_bookmark, zio, rc->rc_offset, rc->rc_size, rc->rc_abd, bad_data, &zbc); } } /* * We keep track of whether or not there were any injected errors, so that * any ereports we generate can note it. */ static int raidz_checksum_verify(zio_t *zio) { zio_bad_cksum_t zbc = {0}; raidz_map_t *rm = zio->io_vsd; int ret = zio_checksum_error(zio, &zbc); if (ret != 0 && zbc.zbc_injected != 0) rm->rm_ecksuminjected = 1; return (ret); } /* * Generate the parity from the data columns. If we tried and were able to * read the parity without error, verify that the generated parity matches the * data we read. If it doesn't, we fire off a checksum error. Return the * number of such failures. */ static int raidz_parity_verify(zio_t *zio, raidz_row_t *rr) { abd_t *orig[VDEV_RAIDZ_MAXPARITY]; int c, ret = 0; raidz_map_t *rm = zio->io_vsd; raidz_col_t *rc; blkptr_t *bp = zio->io_bp; enum zio_checksum checksum = (bp == NULL ? zio->io_prop.zp_checksum : (BP_IS_GANG(bp) ? ZIO_CHECKSUM_GANG_HEADER : BP_GET_CHECKSUM(bp))); if (checksum == ZIO_CHECKSUM_NOPARITY) return (ret); for (c = 0; c < rr->rr_firstdatacol; c++) { rc = &rr->rr_col[c]; if (!rc->rc_tried || rc->rc_error != 0) continue; orig[c] = rc->rc_abd; ASSERT3U(abd_get_size(rc->rc_abd), ==, rc->rc_size); rc->rc_abd = abd_alloc_linear(rc->rc_size, B_FALSE); } /* * Verify any empty sectors are zero filled to ensure the parity * is calculated correctly even if these non-data sectors are damaged. */ if (rr->rr_nempty && rr->rr_abd_empty != NULL) ret += vdev_draid_map_verify_empty(zio, rr); /* * Regenerates parity even for !tried||rc_error!=0 columns. This * isn't harmful but it does have the side effect of fixing stuff * we didn't realize was necessary (i.e. even if we return 0). */ vdev_raidz_generate_parity_row(rm, rr); for (c = 0; c < rr->rr_firstdatacol; c++) { rc = &rr->rr_col[c]; if (!rc->rc_tried || rc->rc_error != 0) continue; if (abd_cmp(orig[c], rc->rc_abd) != 0) { zfs_dbgmsg("found error on col=%u devidx=%u off %llx", c, (int)rc->rc_devidx, (u_longlong_t)rc->rc_offset); vdev_raidz_checksum_error(zio, rc, orig[c]); rc->rc_error = SET_ERROR(ECKSUM); ret++; } abd_free(orig[c]); } return (ret); } static int vdev_raidz_worst_error(raidz_row_t *rr) { int error = 0; for (int c = 0; c < rr->rr_cols; c++) { error = zio_worst_error(error, rr->rr_col[c].rc_error); error = zio_worst_error(error, rr->rr_col[c].rc_shadow_error); } return (error); } static void vdev_raidz_io_done_verified(zio_t *zio, raidz_row_t *rr) { int unexpected_errors = 0; int parity_errors = 0; int parity_untried = 0; int data_errors = 0; ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ); for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_error) { if (c < rr->rr_firstdatacol) parity_errors++; else data_errors++; if (!rc->rc_skipped) unexpected_errors++; } else if (c < rr->rr_firstdatacol && !rc->rc_tried) { parity_untried++; } if (rc->rc_force_repair) unexpected_errors++; } /* * If we read more parity disks than were used for * reconstruction, confirm that the other parity disks produced * correct data. * * Note that we also regenerate parity when resilvering so we * can write it out to failed devices later. */ if (parity_errors + parity_untried < rr->rr_firstdatacol - data_errors || (zio->io_flags & ZIO_FLAG_RESILVER)) { int n = raidz_parity_verify(zio, rr); unexpected_errors += n; } if (zio->io_error == 0 && spa_writeable(zio->io_spa) && (unexpected_errors > 0 || (zio->io_flags & ZIO_FLAG_RESILVER))) { /* * Use the good data we have in hand to repair damaged children. */ for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; vdev_t *vd = zio->io_vd; vdev_t *cvd = vd->vdev_child[rc->rc_devidx]; if (!rc->rc_allow_repair) { continue; } else if (!rc->rc_force_repair && (rc->rc_error == 0 || rc->rc_size == 0)) { continue; } zfs_dbgmsg("zio=%px repairing c=%u devidx=%u " "offset=%llx", zio, c, rc->rc_devidx, (long long)rc->rc_offset); zio_nowait(zio_vdev_child_io(zio, NULL, cvd, rc->rc_offset, rc->rc_abd, rc->rc_size, ZIO_TYPE_WRITE, zio->io_priority == ZIO_PRIORITY_REBUILD ? ZIO_PRIORITY_REBUILD : ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_IO_REPAIR | (unexpected_errors ? ZIO_FLAG_SELF_HEAL : 0), NULL, NULL)); } } /* * Scrub or resilver i/o's: overwrite any shadow locations with the * good data. This ensures that if we've already copied this sector, * it will be corrected if it was damaged. This writes more than is * necessary, but since expansion is paused during scrub/resilver, at * most a single row will have a shadow location. */ if (zio->io_error == 0 && spa_writeable(zio->io_spa) && (zio->io_flags & (ZIO_FLAG_RESILVER | ZIO_FLAG_SCRUB))) { for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; vdev_t *vd = zio->io_vd; if (rc->rc_shadow_devidx == INT_MAX || rc->rc_size == 0) continue; vdev_t *cvd = vd->vdev_child[rc->rc_shadow_devidx]; /* * Note: We don't want to update the repair stats * because that would incorrectly indicate that there * was bad data to repair, which we aren't sure about. * By clearing the SCAN_THREAD flag, we prevent this * from happening, despite having the REPAIR flag set. * We need to set SELF_HEAL so that this i/o can't be * bypassed by zio_vdev_io_start(). */ zio_t *cio = zio_vdev_child_io(zio, NULL, cvd, rc->rc_shadow_offset, rc->rc_abd, rc->rc_size, ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_IO_REPAIR | ZIO_FLAG_SELF_HEAL, NULL, NULL); cio->io_flags &= ~ZIO_FLAG_SCAN_THREAD; zio_nowait(cio); } } } static void raidz_restore_orig_data(raidz_map_t *rm) { for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_need_orig_restore) { abd_copy(rc->rc_abd, rc->rc_orig_data, rc->rc_size); rc->rc_need_orig_restore = B_FALSE; } } } } /* * During raidz_reconstruct() for expanded VDEV, we need special consideration * failure simulations. See note in raidz_reconstruct() on simulating failure * of a pre-expansion device. * * Treating logical child i as failed, return TRUE if the given column should * be treated as failed. The idea of logical children allows us to imagine * that a disk silently failed before a RAIDZ expansion (reads from this disk * succeed but return the wrong data). Since the expansion doesn't verify * checksums, the incorrect data will be moved to new locations spread among * the children (going diagonally across them). * * Higher "logical child failures" (values of `i`) indicate these * "pre-expansion failures". The first physical_width values imagine that a * current child failed; the next physical_width-1 values imagine that a * child failed before the most recent expansion; the next physical_width-2 * values imagine a child failed in the expansion before that, etc. */ static boolean_t raidz_simulate_failure(int physical_width, int original_width, int ashift, int i, raidz_col_t *rc) { uint64_t sector_id = physical_width * (rc->rc_offset >> ashift) + rc->rc_devidx; for (int w = physical_width; w >= original_width; w--) { if (i < w) { return (sector_id % w == i); } else { i -= w; } } ASSERT(!"invalid logical child id"); return (B_FALSE); } /* * returns EINVAL if reconstruction of the block will not be possible * returns ECKSUM if this specific reconstruction failed * returns 0 on successful reconstruction */ static int raidz_reconstruct(zio_t *zio, int *ltgts, int ntgts, int nparity) { raidz_map_t *rm = zio->io_vsd; int physical_width = zio->io_vd->vdev_children; int original_width = (rm->rm_original_width != 0) ? rm->rm_original_width : physical_width; int dbgmsg = zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT; if (dbgmsg) { zfs_dbgmsg("raidz_reconstruct_expanded(zio=%px ltgts=%u,%u,%u " "ntgts=%u", zio, ltgts[0], ltgts[1], ltgts[2], ntgts); } /* Reconstruct each row */ for (int r = 0; r < rm->rm_nrows; r++) { raidz_row_t *rr = rm->rm_row[r]; int my_tgts[VDEV_RAIDZ_MAXPARITY]; /* value is child id */ int t = 0; int dead = 0; int dead_data = 0; if (dbgmsg) zfs_dbgmsg("raidz_reconstruct_expanded(row=%u)", r); for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; ASSERT0(rc->rc_need_orig_restore); if (rc->rc_error != 0) { dead++; if (c >= nparity) dead_data++; continue; } if (rc->rc_size == 0) continue; for (int lt = 0; lt < ntgts; lt++) { if (raidz_simulate_failure(physical_width, original_width, zio->io_vd->vdev_top->vdev_ashift, ltgts[lt], rc)) { if (rc->rc_orig_data == NULL) { rc->rc_orig_data = abd_alloc_linear( rc->rc_size, B_TRUE); abd_copy(rc->rc_orig_data, rc->rc_abd, rc->rc_size); } rc->rc_need_orig_restore = B_TRUE; dead++; if (c >= nparity) dead_data++; /* * Note: simulating failure of a * pre-expansion device can hit more * than one column, in which case we * might try to simulate more failures * than can be reconstructed, which is * also more than the size of my_tgts. * This check prevents accessing past * the end of my_tgts. The "dead > * nparity" check below will fail this * reconstruction attempt. */ if (t < VDEV_RAIDZ_MAXPARITY) { my_tgts[t++] = c; if (dbgmsg) { zfs_dbgmsg("simulating " "failure of col %u " "devidx %u", c, (int)rc->rc_devidx); } } break; } } } if (dead > nparity) { /* reconstruction not possible */ if (dbgmsg) { zfs_dbgmsg("reconstruction not possible; " "too many failures"); } raidz_restore_orig_data(rm); return (EINVAL); } if (dead_data > 0) vdev_raidz_reconstruct_row(rm, rr, my_tgts, t); } /* Check for success */ if (raidz_checksum_verify(zio) == 0) { /* Reconstruction succeeded - report errors */ for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_need_orig_restore) { /* * Note: if this is a parity column, * we don't really know if it's wrong. * We need to let * vdev_raidz_io_done_verified() check * it, and if we set rc_error, it will * think that it is a "known" error * that doesn't need to be checked * or corrected. */ if (rc->rc_error == 0 && c >= rr->rr_firstdatacol) { vdev_raidz_checksum_error(zio, rc, rc->rc_orig_data); rc->rc_error = SET_ERROR(ECKSUM); } rc->rc_need_orig_restore = B_FALSE; } } vdev_raidz_io_done_verified(zio, rr); } zio_checksum_verified(zio); if (dbgmsg) { zfs_dbgmsg("reconstruction successful " "(checksum verified)"); } return (0); } /* Reconstruction failed - restore original data */ raidz_restore_orig_data(rm); if (dbgmsg) { zfs_dbgmsg("raidz_reconstruct_expanded(zio=%px) checksum " "failed", zio); } return (ECKSUM); } /* * Iterate over all combinations of N bad vdevs and attempt a reconstruction. * Note that the algorithm below is non-optimal because it doesn't take into * account how reconstruction is actually performed. For example, with * triple-parity RAID-Z the reconstruction procedure is the same if column 4 * is targeted as invalid as if columns 1 and 4 are targeted since in both * cases we'd only use parity information in column 0. * * The order that we find the various possible combinations of failed * disks is dictated by these rules: * - Examine each "slot" (the "i" in tgts[i]) * - Try to increment this slot (tgts[i] += 1) * - if we can't increment because it runs into the next slot, * reset our slot to the minimum, and examine the next slot * * For example, with a 6-wide RAIDZ3, and no known errors (so we have to choose * 3 columns to reconstruct), we will generate the following sequence: * * STATE ACTION * 0 1 2 special case: skip since these are all parity * 0 1 3 first slot: reset to 0; middle slot: increment to 2 * 0 2 3 first slot: increment to 1 * 1 2 3 first: reset to 0; middle: reset to 1; last: increment to 4 * 0 1 4 first: reset to 0; middle: increment to 2 * 0 2 4 first: increment to 1 * 1 2 4 first: reset to 0; middle: increment to 3 * 0 3 4 first: increment to 1 * 1 3 4 first: increment to 2 * 2 3 4 first: reset to 0; middle: reset to 1; last: increment to 5 * 0 1 5 first: reset to 0; middle: increment to 2 * 0 2 5 first: increment to 1 * 1 2 5 first: reset to 0; middle: increment to 3 * 0 3 5 first: increment to 1 * 1 3 5 first: increment to 2 * 2 3 5 first: reset to 0; middle: increment to 4 * 0 4 5 first: increment to 1 * 1 4 5 first: increment to 2 * 2 4 5 first: increment to 3 * 3 4 5 done * * This strategy works for dRAID but is less efficient when there are a large * number of child vdevs and therefore permutations to check. Furthermore, * since the raidz_map_t rows likely do not overlap, reconstruction would be * possible as long as there are no more than nparity data errors per row. * These additional permutations are not currently checked but could be as * a future improvement. * * Returns 0 on success, ECKSUM on failure. */ static int vdev_raidz_combrec(zio_t *zio) { int nparity = vdev_get_nparity(zio->io_vd); raidz_map_t *rm = zio->io_vsd; int physical_width = zio->io_vd->vdev_children; int original_width = (rm->rm_original_width != 0) ? rm->rm_original_width : physical_width; for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; int total_errors = 0; for (int c = 0; c < rr->rr_cols; c++) { if (rr->rr_col[c].rc_error) total_errors++; } if (total_errors > nparity) return (vdev_raidz_worst_error(rr)); } for (int num_failures = 1; num_failures <= nparity; num_failures++) { int tstore[VDEV_RAIDZ_MAXPARITY + 2]; int *ltgts = &tstore[1]; /* value is logical child ID */ /* * Determine number of logical children, n. See comment * above raidz_simulate_failure(). */ int n = 0; for (int w = physical_width; w >= original_width; w--) { n += w; } ASSERT3U(num_failures, <=, nparity); ASSERT3U(num_failures, <=, VDEV_RAIDZ_MAXPARITY); /* Handle corner cases in combrec logic */ ltgts[-1] = -1; for (int i = 0; i < num_failures; i++) { ltgts[i] = i; } ltgts[num_failures] = n; for (;;) { int err = raidz_reconstruct(zio, ltgts, num_failures, nparity); if (err == EINVAL) { /* * Reconstruction not possible with this # * failures; try more failures. */ break; } else if (err == 0) return (0); /* Compute next targets to try */ for (int t = 0; ; t++) { ASSERT3U(t, <, num_failures); ltgts[t]++; if (ltgts[t] == n) { /* try more failures */ ASSERT3U(t, ==, num_failures - 1); if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) { zfs_dbgmsg("reconstruction " "failed for num_failures=" "%u; tried all " "combinations", num_failures); } break; } ASSERT3U(ltgts[t], <, n); ASSERT3U(ltgts[t], <=, ltgts[t + 1]); /* * If that spot is available, we're done here. * Try the next combination. */ if (ltgts[t] != ltgts[t + 1]) break; // found next combination /* * Otherwise, reset this tgt to the minimum, * and move on to the next tgt. */ ltgts[t] = ltgts[t - 1] + 1; ASSERT3U(ltgts[t], ==, t); } /* Increase the number of failures and keep trying. */ if (ltgts[num_failures - 1] == n) break; } } if (zfs_flags & ZFS_DEBUG_RAIDZ_RECONSTRUCT) zfs_dbgmsg("reconstruction failed for all num_failures"); return (ECKSUM); } void vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt) { for (uint64_t row = 0; row < rm->rm_nrows; row++) { raidz_row_t *rr = rm->rm_row[row]; vdev_raidz_reconstruct_row(rm, rr, t, nt); } } /* * Complete a write IO operation on a RAIDZ VDev * * Outline: * 1. Check for errors on the child IOs. * 2. Return, setting an error code if too few child VDevs were written * to reconstruct the data later. Note that partial writes are * considered successful if they can be reconstructed at all. */ static void vdev_raidz_io_done_write_impl(zio_t *zio, raidz_row_t *rr) { int normal_errors = 0; int shadow_errors = 0; ASSERT3U(rr->rr_missingparity, <=, rr->rr_firstdatacol); ASSERT3U(rr->rr_missingdata, <=, rr->rr_cols - rr->rr_firstdatacol); ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE); for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_error != 0) { ASSERT(rc->rc_error != ECKSUM); /* child has no bp */ normal_errors++; } if (rc->rc_shadow_error != 0) { ASSERT(rc->rc_shadow_error != ECKSUM); shadow_errors++; } } /* * Treat partial writes as a success. If we couldn't write enough * columns to reconstruct the data, the I/O failed. Otherwise, good * enough. Note that in the case of a shadow write (during raidz * expansion), depending on if we crash, either the normal (old) or * shadow (new) location may become the "real" version of the block, * so both locations must have sufficient redundancy. * * Now that we support write reallocation, it would be better * to treat partial failure as real failure unless there are * no non-degraded top-level vdevs left, and not update DTLs * if we intend to reallocate. */ if (normal_errors > rr->rr_firstdatacol || shadow_errors > rr->rr_firstdatacol) { zio->io_error = zio_worst_error(zio->io_error, vdev_raidz_worst_error(rr)); } } static void vdev_raidz_io_done_reconstruct_known_missing(zio_t *zio, raidz_map_t *rm, raidz_row_t *rr) { int parity_errors = 0; int parity_untried = 0; int data_errors = 0; int total_errors = 0; ASSERT3U(rr->rr_missingparity, <=, rr->rr_firstdatacol); ASSERT3U(rr->rr_missingdata, <=, rr->rr_cols - rr->rr_firstdatacol); for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; /* * If scrubbing and a replacing/sparing child vdev determined * that not all of its children have an identical copy of the * data, then clear the error so the column is treated like * any other read and force a repair to correct the damage. */ if (rc->rc_error == ECKSUM) { ASSERT(zio->io_flags & ZIO_FLAG_SCRUB); vdev_raidz_checksum_error(zio, rc, rc->rc_abd); rc->rc_force_repair = 1; rc->rc_error = 0; } if (rc->rc_error) { if (c < rr->rr_firstdatacol) parity_errors++; else data_errors++; total_errors++; } else if (c < rr->rr_firstdatacol && !rc->rc_tried) { parity_untried++; } } /* * If there were data errors and the number of errors we saw was * correctable -- less than or equal to the number of parity disks read * -- reconstruct based on the missing data. */ if (data_errors != 0 && total_errors <= rr->rr_firstdatacol - parity_untried) { /* * We either attempt to read all the parity columns or * none of them. If we didn't try to read parity, we * wouldn't be here in the correctable case. There must * also have been fewer parity errors than parity * columns or, again, we wouldn't be in this code path. */ ASSERT(parity_untried == 0); ASSERT(parity_errors < rr->rr_firstdatacol); /* * Identify the data columns that reported an error. */ int n = 0; int tgts[VDEV_RAIDZ_MAXPARITY]; for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_error != 0) { ASSERT(n < VDEV_RAIDZ_MAXPARITY); tgts[n++] = c; } } ASSERT(rr->rr_firstdatacol >= n); vdev_raidz_reconstruct_row(rm, rr, tgts, n); } } /* * Return the number of reads issued. */ static int vdev_raidz_read_all(zio_t *zio, raidz_row_t *rr) { vdev_t *vd = zio->io_vd; int nread = 0; rr->rr_missingdata = 0; rr->rr_missingparity = 0; /* * If this rows contains empty sectors which are not required * for a normal read then allocate an ABD for them now so they * may be read, verified, and any needed repairs performed. */ if (rr->rr_nempty != 0 && rr->rr_abd_empty == NULL) vdev_draid_map_alloc_empty(zio, rr); for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_tried || rc->rc_size == 0) continue; zio_nowait(zio_vdev_child_io(zio, NULL, vd->vdev_child[rc->rc_devidx], rc->rc_offset, rc->rc_abd, rc->rc_size, zio->io_type, zio->io_priority, 0, vdev_raidz_child_done, rc)); nread++; } return (nread); } /* * We're here because either there were too many errors to even attempt * reconstruction (total_errors == rm_first_datacol), or vdev_*_combrec() * failed. In either case, there is enough bad data to prevent reconstruction. * Start checksum ereports for all children which haven't failed. */ static void vdev_raidz_io_done_unrecoverable(zio_t *zio) { raidz_map_t *rm = zio->io_vsd; for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; vdev_t *cvd = zio->io_vd->vdev_child[rc->rc_devidx]; if (rc->rc_error != 0) continue; zio_bad_cksum_t zbc; zbc.zbc_has_cksum = 0; zbc.zbc_injected = rm->rm_ecksuminjected; mutex_enter(&cvd->vdev_stat_lock); cvd->vdev_stat.vs_checksum_errors++; mutex_exit(&cvd->vdev_stat_lock); (void) zfs_ereport_start_checksum(zio->io_spa, cvd, &zio->io_bookmark, zio, rc->rc_offset, rc->rc_size, &zbc); } } } void vdev_raidz_io_done(zio_t *zio) { raidz_map_t *rm = zio->io_vsd; ASSERT(zio->io_bp != NULL); if (zio->io_type == ZIO_TYPE_WRITE) { for (int i = 0; i < rm->rm_nrows; i++) { vdev_raidz_io_done_write_impl(zio, rm->rm_row[i]); } } else { if (rm->rm_phys_col) { /* * This is an aggregated read. Copy the data and status * from the aggregate abd's to the individual rows. */ for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; for (int c = 0; c < rr->rr_cols; c++) { raidz_col_t *rc = &rr->rr_col[c]; if (rc->rc_tried || rc->rc_size == 0) continue; raidz_col_t *prc = &rm->rm_phys_col[rc->rc_devidx]; rc->rc_error = prc->rc_error; rc->rc_tried = prc->rc_tried; rc->rc_skipped = prc->rc_skipped; if (c >= rr->rr_firstdatacol) { /* * Note: this is slightly faster * than using abd_copy_off(). */ char *physbuf = abd_to_buf( prc->rc_abd); void *physloc = physbuf + rc->rc_offset - prc->rc_offset; abd_copy_from_buf(rc->rc_abd, physloc, rc->rc_size); } } } } for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; vdev_raidz_io_done_reconstruct_known_missing(zio, rm, rr); } if (raidz_checksum_verify(zio) == 0) { for (int i = 0; i < rm->rm_nrows; i++) { raidz_row_t *rr = rm->rm_row[i]; vdev_raidz_io_done_verified(zio, rr); } zio_checksum_verified(zio); } else { /* * A sequential resilver has no checksum which makes * combinatoral reconstruction impossible. This code * path is unreachable since raidz_checksum_verify() * has no checksum to verify and must succeed. */ ASSERT3U(zio->io_priority, !=, ZIO_PRIORITY_REBUILD); /* * This isn't a typical situation -- either we got a * read error or a child silently returned bad data. * Read every block so we can try again with as much * data and parity as we can track down. If we've * already been through once before, all children will * be marked as tried so we'll proceed to combinatorial * reconstruction. */ int nread = 0; for (int i = 0; i < rm->rm_nrows; i++) { nread += vdev_raidz_read_all(zio, rm->rm_row[i]); } if (nread != 0) { /* * Normally our stage is VDEV_IO_DONE, but if * we've already called redone(), it will have * changed to VDEV_IO_START, in which case we * don't want to call redone() again. */ if (zio->io_stage != ZIO_STAGE_VDEV_IO_START) zio_vdev_io_redone(zio); return; } /* * It would be too expensive to try every possible * combination of failed sectors in every row, so * instead we try every combination of failed current or * past physical disk. This means that if the incorrect * sectors were all on Nparity disks at any point in the * past, we will find the correct data. The only known * case where this is less durable than a non-expanded * RAIDZ, is if we have a silent failure during * expansion. In that case, one block could be * partially in the old format and partially in the * new format, so we'd lost some sectors from the old * format and some from the new format. * * e.g. logical_width=4 physical_width=6 * the 15 (6+5+4) possible failed disks are: * width=6 child=0 * width=6 child=1 * width=6 child=2 * width=6 child=3 * width=6 child=4 * width=6 child=5 * width=5 child=0 * width=5 child=1 * width=5 child=2 * width=5 child=3 * width=5 child=4 * width=4 child=0 * width=4 child=1 * width=4 child=2 * width=4 child=3 * And we will try every combination of Nparity of these * failing. * * As a first pass, we can generate every combo, * and try reconstructing, ignoring any known * failures. If any row has too many known + simulated * failures, then we bail on reconstructing with this * number of simulated failures. As an improvement, * we could detect the number of whole known failures * (i.e. we have known failures on these disks for * every row; the disks never succeeded), and * subtract that from the max # failures to simulate. * We could go even further like the current * combrec code, but that doesn't seem like it * gains us very much. If we simulate a failure * that is also a known failure, that's fine. */ zio->io_error = vdev_raidz_combrec(zio); if (zio->io_error == ECKSUM && !(zio->io_flags & ZIO_FLAG_SPECULATIVE)) { vdev_raidz_io_done_unrecoverable(zio); } } } if (rm->rm_lr != NULL) { zfs_rangelock_exit(rm->rm_lr); rm->rm_lr = NULL; } } static void vdev_raidz_state_change(vdev_t *vd, int faulted, int degraded) { vdev_raidz_t *vdrz = vd->vdev_tsd; if (faulted > vdrz->vd_nparity) vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_NO_REPLICAS); else if (degraded + faulted != 0) vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, VDEV_AUX_NONE); else vdev_set_state(vd, B_FALSE, VDEV_STATE_HEALTHY, VDEV_AUX_NONE); } /* * Determine if any portion of the provided block resides on a child vdev * with a dirty DTL and therefore needs to be resilvered. The function * assumes that at least one DTL is dirty which implies that full stripe * width blocks must be resilvered. */ static boolean_t vdev_raidz_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize, uint64_t phys_birth) { vdev_raidz_t *vdrz = vd->vdev_tsd; /* * If we're in the middle of a RAIDZ expansion, this block may be in * the old and/or new location. For simplicity, always resilver it. */ if (vdrz->vn_vre.vre_state == DSS_SCANNING) return (B_TRUE); uint64_t dcols = vd->vdev_children; uint64_t nparity = vdrz->vd_nparity; uint64_t ashift = vd->vdev_top->vdev_ashift; /* The starting RAIDZ (parent) vdev sector of the block. */ uint64_t b = DVA_GET_OFFSET(dva) >> ashift; /* The zio's size in units of the vdev's minimum sector size. */ uint64_t s = ((psize - 1) >> ashift) + 1; /* The first column for this stripe. */ uint64_t f = b % dcols; /* Unreachable by sequential resilver. */ ASSERT3U(phys_birth, !=, TXG_UNKNOWN); if (!vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1)) return (B_FALSE); if (s + nparity >= dcols) return (B_TRUE); for (uint64_t c = 0; c < s + nparity; c++) { uint64_t devidx = (f + c) % dcols; vdev_t *cvd = vd->vdev_child[devidx]; /* * dsl_scan_need_resilver() already checked vd with * vdev_dtl_contains(). So here just check cvd with * vdev_dtl_empty(), cheaper and a good approximation. */ if (!vdev_dtl_empty(cvd, DTL_PARTIAL)) return (B_TRUE); } return (B_FALSE); } static void vdev_raidz_xlate(vdev_t *cvd, const range_seg64_t *logical_rs, range_seg64_t *physical_rs, range_seg64_t *remain_rs) { (void) remain_rs; vdev_t *raidvd = cvd->vdev_parent; ASSERT(raidvd->vdev_ops == &vdev_raidz_ops); vdev_raidz_t *vdrz = raidvd->vdev_tsd; if (vdrz->vn_vre.vre_state == DSS_SCANNING) { /* * We're in the middle of expansion, in which case the * translation is in flux. Any answer we give may be wrong * by the time we return, so it isn't safe for the caller to * act on it. Therefore we say that this range isn't present * on any children. The only consumers of this are "zpool * initialize" and trimming, both of which are "best effort" * anyway. */ physical_rs->rs_start = physical_rs->rs_end = 0; remain_rs->rs_start = remain_rs->rs_end = 0; return; } uint64_t width = vdrz->vd_physical_width; uint64_t tgt_col = cvd->vdev_id; uint64_t ashift = raidvd->vdev_top->vdev_ashift; /* make sure the offsets are block-aligned */ ASSERT0(logical_rs->rs_start % (1 << ashift)); ASSERT0(logical_rs->rs_end % (1 << ashift)); uint64_t b_start = logical_rs->rs_start >> ashift; uint64_t b_end = logical_rs->rs_end >> ashift; uint64_t start_row = 0; if (b_start > tgt_col) /* avoid underflow */ start_row = ((b_start - tgt_col - 1) / width) + 1; uint64_t end_row = 0; if (b_end > tgt_col) end_row = ((b_end - tgt_col - 1) / width) + 1; physical_rs->rs_start = start_row << ashift; physical_rs->rs_end = end_row << ashift; ASSERT3U(physical_rs->rs_start, <=, logical_rs->rs_start); ASSERT3U(physical_rs->rs_end - physical_rs->rs_start, <=, logical_rs->rs_end - logical_rs->rs_start); } static void raidz_reflow_sync(void *arg, dmu_tx_t *tx) { spa_t *spa = arg; int txgoff = dmu_tx_get_txg(tx) & TXG_MASK; vdev_raidz_expand_t *vre = spa->spa_raidz_expand; /* * Ensure there are no i/os to the range that is being committed. */ uint64_t old_offset = RRSS_GET_OFFSET(&spa->spa_uberblock); ASSERT3U(vre->vre_offset_pertxg[txgoff], >=, old_offset); mutex_enter(&vre->vre_lock); uint64_t new_offset = MIN(vre->vre_offset_pertxg[txgoff], vre->vre_failed_offset); /* * We should not have committed anything that failed. */ VERIFY3U(vre->vre_failed_offset, >=, old_offset); mutex_exit(&vre->vre_lock); zfs_locked_range_t *lr = zfs_rangelock_enter(&vre->vre_rangelock, old_offset, new_offset - old_offset, RL_WRITER); /* * Update the uberblock that will be written when this txg completes. */ RAIDZ_REFLOW_SET(&spa->spa_uberblock, RRSS_SCRATCH_INVALID_SYNCED_REFLOW, new_offset); vre->vre_offset_pertxg[txgoff] = 0; zfs_rangelock_exit(lr); mutex_enter(&vre->vre_lock); vre->vre_bytes_copied += vre->vre_bytes_copied_pertxg[txgoff]; vre->vre_bytes_copied_pertxg[txgoff] = 0; mutex_exit(&vre->vre_lock); vdev_t *vd = vdev_lookup_top(spa, vre->vre_vdev_id); VERIFY0(zap_update(spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_BYTES_COPIED, sizeof (vre->vre_bytes_copied), 1, &vre->vre_bytes_copied, tx)); } static void raidz_reflow_complete_sync(void *arg, dmu_tx_t *tx) { spa_t *spa = arg; vdev_raidz_expand_t *vre = spa->spa_raidz_expand; vdev_t *raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); vdev_raidz_t *vdrz = raidvd->vdev_tsd; for (int i = 0; i < TXG_SIZE; i++) VERIFY0(vre->vre_offset_pertxg[i]); reflow_node_t *re = kmem_zalloc(sizeof (*re), KM_SLEEP); re->re_txg = tx->tx_txg + TXG_CONCURRENT_STATES; re->re_logical_width = vdrz->vd_physical_width; mutex_enter(&vdrz->vd_expand_lock); avl_add(&vdrz->vd_expand_txgs, re); mutex_exit(&vdrz->vd_expand_lock); vdev_t *vd = vdev_lookup_top(spa, vre->vre_vdev_id); /* * Dirty the config so that the updated ZPOOL_CONFIG_RAIDZ_EXPAND_TXGS * will get written (based on vd_expand_txgs). */ vdev_config_dirty(vd); /* * Before we change vre_state, the on-disk state must reflect that we * have completed all copying, so that vdev_raidz_io_start() can use * vre_state to determine if the reflow is in progress. See also the * end of spa_raidz_expand_thread(). */ VERIFY3U(RRSS_GET_OFFSET(&spa->spa_ubsync), ==, raidvd->vdev_ms_count << raidvd->vdev_ms_shift); vre->vre_end_time = gethrestime_sec(); vre->vre_state = DSS_FINISHED; uint64_t state = vre->vre_state; VERIFY0(zap_update(spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE, sizeof (state), 1, &state, tx)); uint64_t end_time = vre->vre_end_time; VERIFY0(zap_update(spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_END_TIME, sizeof (end_time), 1, &end_time, tx)); spa->spa_uberblock.ub_raidz_reflow_info = 0; spa_history_log_internal(spa, "raidz vdev expansion completed", tx, "%s vdev %llu new width %llu", spa_name(spa), (unsigned long long)vd->vdev_id, (unsigned long long)vd->vdev_children); spa->spa_raidz_expand = NULL; raidvd->vdev_rz_expanding = B_FALSE; spa_async_request(spa, SPA_ASYNC_INITIALIZE_RESTART); spa_async_request(spa, SPA_ASYNC_TRIM_RESTART); spa_async_request(spa, SPA_ASYNC_AUTOTRIM_RESTART); spa_notify_waiters(spa); /* * While we're in syncing context take the opportunity to * setup a scrub. All the data has been sucessfully copied * but we have not validated any checksums. */ pool_scan_func_t func = POOL_SCAN_SCRUB; if (zfs_scrub_after_expand && dsl_scan_setup_check(&func, tx) == 0) dsl_scan_setup_sync(&func, tx); } /* * Struct for one copy zio. */ typedef struct raidz_reflow_arg { vdev_raidz_expand_t *rra_vre; zfs_locked_range_t *rra_lr; uint64_t rra_txg; } raidz_reflow_arg_t; /* * The write of the new location is done. */ static void raidz_reflow_write_done(zio_t *zio) { raidz_reflow_arg_t *rra = zio->io_private; vdev_raidz_expand_t *vre = rra->rra_vre; abd_free(zio->io_abd); mutex_enter(&vre->vre_lock); if (zio->io_error != 0) { /* Force a reflow pause on errors */ vre->vre_failed_offset = MIN(vre->vre_failed_offset, rra->rra_lr->lr_offset); } ASSERT3U(vre->vre_outstanding_bytes, >=, zio->io_size); vre->vre_outstanding_bytes -= zio->io_size; if (rra->rra_lr->lr_offset + rra->rra_lr->lr_length < vre->vre_failed_offset) { vre->vre_bytes_copied_pertxg[rra->rra_txg & TXG_MASK] += zio->io_size; } cv_signal(&vre->vre_cv); mutex_exit(&vre->vre_lock); zfs_rangelock_exit(rra->rra_lr); kmem_free(rra, sizeof (*rra)); spa_config_exit(zio->io_spa, SCL_STATE, zio->io_spa); } /* * The read of the old location is done. The parent zio is the write to * the new location. Allow it to start. */ static void raidz_reflow_read_done(zio_t *zio) { raidz_reflow_arg_t *rra = zio->io_private; vdev_raidz_expand_t *vre = rra->rra_vre; /* * If the read failed, or if it was done on a vdev that is not fully * healthy (e.g. a child that has a resilver in progress), we may not * have the correct data. Note that it's OK if the write proceeds. * It may write garbage but the location is otherwise unused and we * will retry later due to vre_failed_offset. */ if (zio->io_error != 0 || !vdev_dtl_empty(zio->io_vd, DTL_MISSING)) { zfs_dbgmsg("reflow read failed off=%llu size=%llu txg=%llu " "err=%u partial_dtl_empty=%u missing_dtl_empty=%u", (long long)rra->rra_lr->lr_offset, (long long)rra->rra_lr->lr_length, (long long)rra->rra_txg, zio->io_error, vdev_dtl_empty(zio->io_vd, DTL_PARTIAL), vdev_dtl_empty(zio->io_vd, DTL_MISSING)); mutex_enter(&vre->vre_lock); /* Force a reflow pause on errors */ vre->vre_failed_offset = MIN(vre->vre_failed_offset, rra->rra_lr->lr_offset); mutex_exit(&vre->vre_lock); } zio_nowait(zio_unique_parent(zio)); } static void raidz_reflow_record_progress(vdev_raidz_expand_t *vre, uint64_t offset, dmu_tx_t *tx) { int txgoff = dmu_tx_get_txg(tx) & TXG_MASK; spa_t *spa = dmu_tx_pool(tx)->dp_spa; if (offset == 0) return; mutex_enter(&vre->vre_lock); ASSERT3U(vre->vre_offset, <=, offset); vre->vre_offset = offset; mutex_exit(&vre->vre_lock); if (vre->vre_offset_pertxg[txgoff] == 0) { dsl_sync_task_nowait(dmu_tx_pool(tx), raidz_reflow_sync, spa, tx); } vre->vre_offset_pertxg[txgoff] = offset; } static boolean_t vdev_raidz_expand_child_replacing(vdev_t *raidz_vd) { for (int i = 0; i < raidz_vd->vdev_children; i++) { /* Quick check if a child is being replaced */ if (!raidz_vd->vdev_child[i]->vdev_ops->vdev_op_leaf) return (B_TRUE); } return (B_FALSE); } static boolean_t raidz_reflow_impl(vdev_t *vd, vdev_raidz_expand_t *vre, range_tree_t *rt, dmu_tx_t *tx) { spa_t *spa = vd->vdev_spa; int ashift = vd->vdev_top->vdev_ashift; uint64_t offset, size; if (!range_tree_find_in(rt, 0, vd->vdev_top->vdev_asize, &offset, &size)) { return (B_FALSE); } ASSERT(IS_P2ALIGNED(offset, 1 << ashift)); ASSERT3U(size, >=, 1 << ashift); uint64_t length = 1 << ashift; int txgoff = dmu_tx_get_txg(tx) & TXG_MASK; uint64_t blkid = offset >> ashift; int old_children = vd->vdev_children - 1; /* * We can only progress to the point that writes will not overlap * with blocks whose progress has not yet been recorded on disk. * Since partially-copied rows are still read from the old location, * we need to stop one row before the sector-wise overlap, to prevent * row-wise overlap. * * Note that even if we are skipping over a large unallocated region, * we can't move the on-disk progress to `offset`, because concurrent * writes/allocations could still use the currently-unallocated * region. */ uint64_t ubsync_blkid = RRSS_GET_OFFSET(&spa->spa_ubsync) >> ashift; uint64_t next_overwrite_blkid = ubsync_blkid + ubsync_blkid / old_children - old_children; VERIFY3U(next_overwrite_blkid, >, ubsync_blkid); if (blkid >= next_overwrite_blkid) { raidz_reflow_record_progress(vre, next_overwrite_blkid << ashift, tx); return (B_TRUE); } range_tree_remove(rt, offset, length); raidz_reflow_arg_t *rra = kmem_zalloc(sizeof (*rra), KM_SLEEP); rra->rra_vre = vre; rra->rra_lr = zfs_rangelock_enter(&vre->vre_rangelock, offset, length, RL_WRITER); rra->rra_txg = dmu_tx_get_txg(tx); raidz_reflow_record_progress(vre, offset + length, tx); mutex_enter(&vre->vre_lock); vre->vre_outstanding_bytes += length; mutex_exit(&vre->vre_lock); /* * SCL_STATE will be released when the read and write are done, * by raidz_reflow_write_done(). */ spa_config_enter(spa, SCL_STATE, spa, RW_READER); /* check if a replacing vdev was added, if so treat it as an error */ if (vdev_raidz_expand_child_replacing(vd)) { zfs_dbgmsg("replacing vdev encountered, reflow paused at " "offset=%llu txg=%llu", (long long)rra->rra_lr->lr_offset, (long long)rra->rra_txg); mutex_enter(&vre->vre_lock); vre->vre_failed_offset = MIN(vre->vre_failed_offset, rra->rra_lr->lr_offset); cv_signal(&vre->vre_cv); mutex_exit(&vre->vre_lock); /* drop everything we acquired */ zfs_rangelock_exit(rra->rra_lr); kmem_free(rra, sizeof (*rra)); spa_config_exit(spa, SCL_STATE, spa); return (B_TRUE); } zio_t *pio = spa->spa_txg_zio[txgoff]; abd_t *abd = abd_alloc_for_io(length, B_FALSE); zio_t *write_zio = zio_vdev_child_io(pio, NULL, vd->vdev_child[blkid % vd->vdev_children], (blkid / vd->vdev_children) << ashift, abd, length, ZIO_TYPE_WRITE, ZIO_PRIORITY_REMOVAL, ZIO_FLAG_CANFAIL, raidz_reflow_write_done, rra); zio_nowait(zio_vdev_child_io(write_zio, NULL, vd->vdev_child[blkid % old_children], (blkid / old_children) << ashift, abd, length, ZIO_TYPE_READ, ZIO_PRIORITY_REMOVAL, ZIO_FLAG_CANFAIL, raidz_reflow_read_done, rra)); return (B_FALSE); } /* * For testing (ztest specific) */ static void raidz_expand_pause(uint_t pause_point) { while (raidz_expand_pause_point != 0 && raidz_expand_pause_point <= pause_point) delay(hz); } static void raidz_scratch_child_done(zio_t *zio) { zio_t *pio = zio->io_private; mutex_enter(&pio->io_lock); pio->io_error = zio_worst_error(pio->io_error, zio->io_error); mutex_exit(&pio->io_lock); } /* * Reflow the beginning portion of the vdev into an intermediate scratch area * in memory and on disk. This operation must be persisted on disk before we * proceed to overwrite the beginning portion with the reflowed data. * * This multi-step task can fail to complete if disk errors are encountered * and we can return here after a pause (waiting for disk to become healthy). */ static void raidz_reflow_scratch_sync(void *arg, dmu_tx_t *tx) { vdev_raidz_expand_t *vre = arg; spa_t *spa = dmu_tx_pool(tx)->dp_spa; zio_t *pio; int error; spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); vdev_t *raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); int ashift = raidvd->vdev_ashift; uint64_t write_size = P2ALIGN(VDEV_BOOT_SIZE, 1 << ashift); uint64_t logical_size = write_size * raidvd->vdev_children; uint64_t read_size = P2ROUNDUP(DIV_ROUND_UP(logical_size, (raidvd->vdev_children - 1)), 1 << ashift); /* * The scratch space must be large enough to get us to the point * that one row does not overlap itself when moved. This is checked * by vdev_raidz_attach_check(). */ VERIFY3U(write_size, >=, raidvd->vdev_children << ashift); VERIFY3U(write_size, <=, VDEV_BOOT_SIZE); VERIFY3U(write_size, <=, read_size); zfs_locked_range_t *lr = zfs_rangelock_enter(&vre->vre_rangelock, 0, logical_size, RL_WRITER); abd_t **abds = kmem_alloc(raidvd->vdev_children * sizeof (abd_t *), KM_SLEEP); for (int i = 0; i < raidvd->vdev_children; i++) { abds[i] = abd_alloc_linear(read_size, B_FALSE); } raidz_expand_pause(RAIDZ_EXPAND_PAUSE_PRE_SCRATCH_1); /* * If we have already written the scratch area then we must read from * there, since new writes were redirected there while we were paused * or the original location may have been partially overwritten with * reflowed data. */ if (RRSS_GET_STATE(&spa->spa_ubsync) == RRSS_SCRATCH_VALID) { VERIFY3U(RRSS_GET_OFFSET(&spa->spa_ubsync), ==, logical_size); /* * Read from scratch space. */ pio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); for (int i = 0; i < raidvd->vdev_children; i++) { /* * Note: zio_vdev_child_io() adds VDEV_LABEL_START_SIZE * to the offset to calculate the physical offset to * write to. Passing in a negative offset makes us * access the scratch area. */ zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], VDEV_BOOT_OFFSET - VDEV_LABEL_START_SIZE, abds[i], write_size, ZIO_TYPE_READ, ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL, raidz_scratch_child_done, pio)); } error = zio_wait(pio); if (error != 0) { zfs_dbgmsg("reflow: error %d reading scratch location", error); goto io_error_exit; } goto overwrite; } /* * Read from original location. */ pio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); for (int i = 0; i < raidvd->vdev_children - 1; i++) { ASSERT0(vdev_is_dead(raidvd->vdev_child[i])); zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], 0, abds[i], read_size, ZIO_TYPE_READ, ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL, raidz_scratch_child_done, pio)); } error = zio_wait(pio); if (error != 0) { zfs_dbgmsg("reflow: error %d reading original location", error); io_error_exit: for (int i = 0; i < raidvd->vdev_children; i++) abd_free(abds[i]); kmem_free(abds, raidvd->vdev_children * sizeof (abd_t *)); zfs_rangelock_exit(lr); spa_config_exit(spa, SCL_STATE, FTAG); return; } raidz_expand_pause(RAIDZ_EXPAND_PAUSE_PRE_SCRATCH_2); /* * Reflow in memory. */ uint64_t logical_sectors = logical_size >> ashift; for (int i = raidvd->vdev_children - 1; i < logical_sectors; i++) { int oldchild = i % (raidvd->vdev_children - 1); uint64_t oldoff = (i / (raidvd->vdev_children - 1)) << ashift; int newchild = i % raidvd->vdev_children; uint64_t newoff = (i / raidvd->vdev_children) << ashift; /* a single sector should not be copying over itself */ ASSERT(!(newchild == oldchild && newoff == oldoff)); abd_copy_off(abds[newchild], abds[oldchild], newoff, oldoff, 1 << ashift); } /* * Verify that we filled in everything we intended to (write_size on * each child). */ VERIFY0(logical_sectors % raidvd->vdev_children); VERIFY3U((logical_sectors / raidvd->vdev_children) << ashift, ==, write_size); /* * Write to scratch location (boot area). */ pio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); for (int i = 0; i < raidvd->vdev_children; i++) { /* * Note: zio_vdev_child_io() adds VDEV_LABEL_START_SIZE to * the offset to calculate the physical offset to write to. * Passing in a negative offset lets us access the boot area. */ zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], VDEV_BOOT_OFFSET - VDEV_LABEL_START_SIZE, abds[i], write_size, ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_CANFAIL, raidz_scratch_child_done, pio)); } error = zio_wait(pio); if (error != 0) { zfs_dbgmsg("reflow: error %d writing scratch location", error); goto io_error_exit; } pio = zio_root(spa, NULL, NULL, 0); zio_flush(pio, raidvd); zio_wait(pio); zfs_dbgmsg("reflow: wrote %llu bytes (logical) to scratch area", (long long)logical_size); raidz_expand_pause(RAIDZ_EXPAND_PAUSE_PRE_SCRATCH_3); /* * Update uberblock to indicate that scratch space is valid. This is * needed because after this point, the real location may be * overwritten. If we crash, we need to get the data from the * scratch space, rather than the real location. * * Note: ub_timestamp is bumped so that vdev_uberblock_compare() * will prefer this uberblock. */ RAIDZ_REFLOW_SET(&spa->spa_ubsync, RRSS_SCRATCH_VALID, logical_size); spa->spa_ubsync.ub_timestamp++; ASSERT0(vdev_uberblock_sync_list(&spa->spa_root_vdev, 1, &spa->spa_ubsync, ZIO_FLAG_CONFIG_WRITER)); if (spa_multihost(spa)) mmp_update_uberblock(spa, &spa->spa_ubsync); zfs_dbgmsg("reflow: uberblock updated " "(txg %llu, SCRATCH_VALID, size %llu, ts %llu)", (long long)spa->spa_ubsync.ub_txg, (long long)logical_size, (long long)spa->spa_ubsync.ub_timestamp); raidz_expand_pause(RAIDZ_EXPAND_PAUSE_SCRATCH_VALID); /* * Overwrite with reflow'ed data. */ overwrite: pio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL); for (int i = 0; i < raidvd->vdev_children; i++) { zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], 0, abds[i], write_size, ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_CANFAIL, raidz_scratch_child_done, pio)); } error = zio_wait(pio); if (error != 0) { /* * When we exit early here and drop the range lock, new * writes will go into the scratch area so we'll need to * read from there when we return after pausing. */ zfs_dbgmsg("reflow: error %d writing real location", error); /* * Update the uberblock that is written when this txg completes. */ RAIDZ_REFLOW_SET(&spa->spa_uberblock, RRSS_SCRATCH_VALID, logical_size); goto io_error_exit; } pio = zio_root(spa, NULL, NULL, 0); zio_flush(pio, raidvd); zio_wait(pio); zfs_dbgmsg("reflow: overwrote %llu bytes (logical) to real location", (long long)logical_size); for (int i = 0; i < raidvd->vdev_children; i++) abd_free(abds[i]); kmem_free(abds, raidvd->vdev_children * sizeof (abd_t *)); raidz_expand_pause(RAIDZ_EXPAND_PAUSE_SCRATCH_REFLOWED); /* * Update uberblock to indicate that the initial part has been * reflow'ed. This is needed because after this point (when we exit * the rangelock), we allow regular writes to this region, which will * be written to the new location only (because reflow_offset_next == * reflow_offset_synced). If we crashed and re-copied from the * scratch space, we would lose the regular writes. */ RAIDZ_REFLOW_SET(&spa->spa_ubsync, RRSS_SCRATCH_INVALID_SYNCED, logical_size); spa->spa_ubsync.ub_timestamp++; ASSERT0(vdev_uberblock_sync_list(&spa->spa_root_vdev, 1, &spa->spa_ubsync, ZIO_FLAG_CONFIG_WRITER)); if (spa_multihost(spa)) mmp_update_uberblock(spa, &spa->spa_ubsync); zfs_dbgmsg("reflow: uberblock updated " "(txg %llu, SCRATCH_NOT_IN_USE, size %llu, ts %llu)", (long long)spa->spa_ubsync.ub_txg, (long long)logical_size, (long long)spa->spa_ubsync.ub_timestamp); raidz_expand_pause(RAIDZ_EXPAND_PAUSE_SCRATCH_POST_REFLOW_1); /* * Update progress. */ vre->vre_offset = logical_size; zfs_rangelock_exit(lr); spa_config_exit(spa, SCL_STATE, FTAG); int txgoff = dmu_tx_get_txg(tx) & TXG_MASK; vre->vre_offset_pertxg[txgoff] = vre->vre_offset; vre->vre_bytes_copied_pertxg[txgoff] = vre->vre_bytes_copied; /* * Note - raidz_reflow_sync() will update the uberblock state to * RRSS_SCRATCH_INVALID_SYNCED_REFLOW */ raidz_reflow_sync(spa, tx); raidz_expand_pause(RAIDZ_EXPAND_PAUSE_SCRATCH_POST_REFLOW_2); } /* * We crashed in the middle of raidz_reflow_scratch_sync(); complete its work * here. No other i/o can be in progress, so we don't need the vre_rangelock. */ void vdev_raidz_reflow_copy_scratch(spa_t *spa) { vdev_raidz_expand_t *vre = spa->spa_raidz_expand; uint64_t logical_size = RRSS_GET_OFFSET(&spa->spa_uberblock); ASSERT3U(RRSS_GET_STATE(&spa->spa_uberblock), ==, RRSS_SCRATCH_VALID); spa_config_enter(spa, SCL_STATE, FTAG, RW_READER); vdev_t *raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); ASSERT0(logical_size % raidvd->vdev_children); uint64_t write_size = logical_size / raidvd->vdev_children; zio_t *pio; /* * Read from scratch space. */ abd_t **abds = kmem_alloc(raidvd->vdev_children * sizeof (abd_t *), KM_SLEEP); for (int i = 0; i < raidvd->vdev_children; i++) { abds[i] = abd_alloc_linear(write_size, B_FALSE); } pio = zio_root(spa, NULL, NULL, 0); for (int i = 0; i < raidvd->vdev_children; i++) { /* * Note: zio_vdev_child_io() adds VDEV_LABEL_START_SIZE to * the offset to calculate the physical offset to write to. * Passing in a negative offset lets us access the boot area. */ zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], VDEV_BOOT_OFFSET - VDEV_LABEL_START_SIZE, abds[i], write_size, ZIO_TYPE_READ, ZIO_PRIORITY_ASYNC_READ, 0, raidz_scratch_child_done, pio)); } zio_wait(pio); /* * Overwrite real location with reflow'ed data. */ pio = zio_root(spa, NULL, NULL, 0); for (int i = 0; i < raidvd->vdev_children; i++) { zio_nowait(zio_vdev_child_io(pio, NULL, raidvd->vdev_child[i], 0, abds[i], write_size, ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE, 0, raidz_scratch_child_done, pio)); } zio_wait(pio); pio = zio_root(spa, NULL, NULL, 0); zio_flush(pio, raidvd); zio_wait(pio); zfs_dbgmsg("reflow recovery: overwrote %llu bytes (logical) " "to real location", (long long)logical_size); for (int i = 0; i < raidvd->vdev_children; i++) abd_free(abds[i]); kmem_free(abds, raidvd->vdev_children * sizeof (abd_t *)); /* * Update uberblock. */ RAIDZ_REFLOW_SET(&spa->spa_ubsync, RRSS_SCRATCH_INVALID_SYNCED_ON_IMPORT, logical_size); spa->spa_ubsync.ub_timestamp++; VERIFY0(vdev_uberblock_sync_list(&spa->spa_root_vdev, 1, &spa->spa_ubsync, ZIO_FLAG_CONFIG_WRITER)); if (spa_multihost(spa)) mmp_update_uberblock(spa, &spa->spa_ubsync); zfs_dbgmsg("reflow recovery: uberblock updated " "(txg %llu, SCRATCH_NOT_IN_USE, size %llu, ts %llu)", (long long)spa->spa_ubsync.ub_txg, (long long)logical_size, (long long)spa->spa_ubsync.ub_timestamp); dmu_tx_t *tx = dmu_tx_create_assigned(spa->spa_dsl_pool, spa_first_txg(spa)); int txgoff = dmu_tx_get_txg(tx) & TXG_MASK; vre->vre_offset = logical_size; vre->vre_offset_pertxg[txgoff] = vre->vre_offset; vre->vre_bytes_copied_pertxg[txgoff] = vre->vre_bytes_copied; /* * Note that raidz_reflow_sync() will update the uberblock once more */ raidz_reflow_sync(spa, tx); dmu_tx_commit(tx); spa_config_exit(spa, SCL_STATE, FTAG); } static boolean_t spa_raidz_expand_thread_check(void *arg, zthr_t *zthr) { (void) zthr; spa_t *spa = arg; return (spa->spa_raidz_expand != NULL && !spa->spa_raidz_expand->vre_waiting_for_resilver); } /* * RAIDZ expansion background thread * * Can be called multiple times if the reflow is paused */ static void spa_raidz_expand_thread(void *arg, zthr_t *zthr) { spa_t *spa = arg; vdev_raidz_expand_t *vre = spa->spa_raidz_expand; if (RRSS_GET_STATE(&spa->spa_ubsync) == RRSS_SCRATCH_VALID) vre->vre_offset = 0; else vre->vre_offset = RRSS_GET_OFFSET(&spa->spa_ubsync); /* Reflow the begining portion using the scratch area */ if (vre->vre_offset == 0) { VERIFY0(dsl_sync_task(spa_name(spa), NULL, raidz_reflow_scratch_sync, vre, 0, ZFS_SPACE_CHECK_NONE)); /* if we encountered errors then pause */ if (vre->vre_offset == 0) { mutex_enter(&vre->vre_lock); vre->vre_waiting_for_resilver = B_TRUE; mutex_exit(&vre->vre_lock); return; } } spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_t *raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); uint64_t guid = raidvd->vdev_guid; /* Iterate over all the remaining metaslabs */ for (uint64_t i = vre->vre_offset >> raidvd->vdev_ms_shift; i < raidvd->vdev_ms_count && !zthr_iscancelled(zthr) && vre->vre_failed_offset == UINT64_MAX; i++) { metaslab_t *msp = raidvd->vdev_ms[i]; metaslab_disable(msp); mutex_enter(&msp->ms_lock); /* * The metaslab may be newly created (for the expanded * space), in which case its trees won't exist yet, * so we need to bail out early. */ if (msp->ms_new) { mutex_exit(&msp->ms_lock); metaslab_enable(msp, B_FALSE, B_FALSE); continue; } VERIFY0(metaslab_load(msp)); /* * We want to copy everything except the free (allocatable) * space. Note that there may be a little bit more free * space (e.g. in ms_defer), and it's fine to copy that too. */ range_tree_t *rt = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); range_tree_add(rt, msp->ms_start, msp->ms_size); range_tree_walk(msp->ms_allocatable, range_tree_remove, rt); mutex_exit(&msp->ms_lock); /* * Force the last sector of each metaslab to be copied. This * ensures that we advance the on-disk progress to the end of * this metaslab while the metaslab is disabled. Otherwise, we * could move past this metaslab without advancing the on-disk * progress, and then an allocation to this metaslab would not * be copied. */ int sectorsz = 1 << raidvd->vdev_ashift; uint64_t ms_last_offset = msp->ms_start + msp->ms_size - sectorsz; if (!range_tree_contains(rt, ms_last_offset, sectorsz)) { range_tree_add(rt, ms_last_offset, sectorsz); } /* * When we are resuming from a paused expansion (i.e. * when importing a pool with a expansion in progress), * discard any state that we have already processed. */ range_tree_clear(rt, 0, vre->vre_offset); while (!zthr_iscancelled(zthr) && !range_tree_is_empty(rt) && vre->vre_failed_offset == UINT64_MAX) { /* * We need to periodically drop the config lock so that * writers can get in. Additionally, we can't wait * for a txg to sync while holding a config lock * (since a waiting writer could cause a 3-way deadlock * with the sync thread, which also gets a config * lock for reader). So we can't hold the config lock * while calling dmu_tx_assign(). */ spa_config_exit(spa, SCL_CONFIG, FTAG); /* * If requested, pause the reflow when the amount * specified by raidz_expand_max_reflow_bytes is reached * * This pause is only used during testing or debugging. */ while (raidz_expand_max_reflow_bytes != 0 && raidz_expand_max_reflow_bytes <= vre->vre_bytes_copied && !zthr_iscancelled(zthr)) { delay(hz); } mutex_enter(&vre->vre_lock); while (vre->vre_outstanding_bytes > raidz_expand_max_copy_bytes) { cv_wait(&vre->vre_cv, &vre->vre_lock); } mutex_exit(&vre->vre_lock); dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); VERIFY0(dmu_tx_assign(tx, TXG_WAIT)); uint64_t txg = dmu_tx_get_txg(tx); /* * Reacquire the vdev_config lock. Theoretically, the * vdev_t that we're expanding may have changed. */ spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); boolean_t needsync = raidz_reflow_impl(raidvd, vre, rt, tx); dmu_tx_commit(tx); if (needsync) { spa_config_exit(spa, SCL_CONFIG, FTAG); txg_wait_synced(spa->spa_dsl_pool, txg); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); } } spa_config_exit(spa, SCL_CONFIG, FTAG); metaslab_enable(msp, B_FALSE, B_FALSE); range_tree_vacate(rt, NULL, NULL); range_tree_destroy(rt); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); raidvd = vdev_lookup_top(spa, vre->vre_vdev_id); } spa_config_exit(spa, SCL_CONFIG, FTAG); /* * The txg_wait_synced() here ensures that all reflow zio's have * completed, and vre_failed_offset has been set if necessary. It * also ensures that the progress of the last raidz_reflow_sync() is * written to disk before raidz_reflow_complete_sync() changes the * in-memory vre_state. vdev_raidz_io_start() uses vre_state to * determine if a reflow is in progress, in which case we may need to * write to both old and new locations. Therefore we can only change * vre_state once this is not necessary, which is once the on-disk * progress (in spa_ubsync) has been set past any possible writes (to * the end of the last metaslab). */ txg_wait_synced(spa->spa_dsl_pool, 0); if (!zthr_iscancelled(zthr) && vre->vre_offset == raidvd->vdev_ms_count << raidvd->vdev_ms_shift) { /* * We are not being canceled or paused, so the reflow must be * complete. In that case also mark it as completed on disk. */ ASSERT3U(vre->vre_failed_offset, ==, UINT64_MAX); VERIFY0(dsl_sync_task(spa_name(spa), NULL, raidz_reflow_complete_sync, spa, 0, ZFS_SPACE_CHECK_NONE)); (void) vdev_online(spa, guid, ZFS_ONLINE_EXPAND, NULL); } else { /* * Wait for all copy zio's to complete and for all the * raidz_reflow_sync() synctasks to be run. */ spa_history_log_internal(spa, "reflow pause", NULL, "offset=%llu failed_offset=%lld", (long long)vre->vre_offset, (long long)vre->vre_failed_offset); mutex_enter(&vre->vre_lock); if (vre->vre_failed_offset != UINT64_MAX) { /* * Reset progress so that we will retry everything * after the point that something failed. */ vre->vre_offset = vre->vre_failed_offset; vre->vre_failed_offset = UINT64_MAX; vre->vre_waiting_for_resilver = B_TRUE; } mutex_exit(&vre->vre_lock); } } void spa_start_raidz_expansion_thread(spa_t *spa) { ASSERT3P(spa->spa_raidz_expand_zthr, ==, NULL); spa->spa_raidz_expand_zthr = zthr_create("raidz_expand", spa_raidz_expand_thread_check, spa_raidz_expand_thread, spa, defclsyspri); } void raidz_dtl_reassessed(vdev_t *vd) { spa_t *spa = vd->vdev_spa; if (spa->spa_raidz_expand != NULL) { vdev_raidz_expand_t *vre = spa->spa_raidz_expand; /* * we get called often from vdev_dtl_reassess() so make * sure it's our vdev and any replacing is complete */ if (vd->vdev_top->vdev_id == vre->vre_vdev_id && !vdev_raidz_expand_child_replacing(vd->vdev_top)) { mutex_enter(&vre->vre_lock); if (vre->vre_waiting_for_resilver) { vdev_dbgmsg(vd, "DTL reassessed, " "continuing raidz expansion"); vre->vre_waiting_for_resilver = B_FALSE; zthr_wakeup(spa->spa_raidz_expand_zthr); } mutex_exit(&vre->vre_lock); } } } int vdev_raidz_attach_check(vdev_t *new_child) { vdev_t *raidvd = new_child->vdev_parent; uint64_t new_children = raidvd->vdev_children; /* * We use the "boot" space as scratch space to handle overwriting the * initial part of the vdev. If it is too small, then this expansion * is not allowed. This would be very unusual (e.g. ashift > 13 and * >200 children). */ if (new_children << raidvd->vdev_ashift > VDEV_BOOT_SIZE) { return (EINVAL); } return (0); } void vdev_raidz_attach_sync(void *arg, dmu_tx_t *tx) { vdev_t *new_child = arg; spa_t *spa = new_child->vdev_spa; vdev_t *raidvd = new_child->vdev_parent; vdev_raidz_t *vdrz = raidvd->vdev_tsd; ASSERT3P(raidvd->vdev_ops, ==, &vdev_raidz_ops); ASSERT3P(raidvd->vdev_top, ==, raidvd); ASSERT3U(raidvd->vdev_children, >, vdrz->vd_original_width); ASSERT3U(raidvd->vdev_children, ==, vdrz->vd_physical_width + 1); ASSERT3P(raidvd->vdev_child[raidvd->vdev_children - 1], ==, new_child); spa_feature_incr(spa, SPA_FEATURE_RAIDZ_EXPANSION, tx); vdrz->vd_physical_width++; VERIFY0(spa->spa_uberblock.ub_raidz_reflow_info); vdrz->vn_vre.vre_vdev_id = raidvd->vdev_id; vdrz->vn_vre.vre_offset = 0; vdrz->vn_vre.vre_failed_offset = UINT64_MAX; spa->spa_raidz_expand = &vdrz->vn_vre; zthr_wakeup(spa->spa_raidz_expand_zthr); /* * Dirty the config so that ZPOOL_CONFIG_RAIDZ_EXPANDING will get * written to the config. */ vdev_config_dirty(raidvd); vdrz->vn_vre.vre_start_time = gethrestime_sec(); vdrz->vn_vre.vre_end_time = 0; vdrz->vn_vre.vre_state = DSS_SCANNING; vdrz->vn_vre.vre_bytes_copied = 0; uint64_t state = vdrz->vn_vre.vre_state; VERIFY0(zap_update(spa->spa_meta_objset, raidvd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE, sizeof (state), 1, &state, tx)); uint64_t start_time = vdrz->vn_vre.vre_start_time; VERIFY0(zap_update(spa->spa_meta_objset, raidvd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_START_TIME, sizeof (start_time), 1, &start_time, tx)); (void) zap_remove(spa->spa_meta_objset, raidvd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_END_TIME, tx); (void) zap_remove(spa->spa_meta_objset, raidvd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_BYTES_COPIED, tx); spa_history_log_internal(spa, "raidz vdev expansion started", tx, "%s vdev %llu new width %llu", spa_name(spa), (unsigned long long)raidvd->vdev_id, (unsigned long long)raidvd->vdev_children); } int vdev_raidz_load(vdev_t *vd) { vdev_raidz_t *vdrz = vd->vdev_tsd; int err; uint64_t state = DSS_NONE; uint64_t start_time = 0; uint64_t end_time = 0; uint64_t bytes_copied = 0; if (vd->vdev_top_zap != 0) { err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_STATE, sizeof (state), 1, &state); if (err != 0 && err != ENOENT) return (err); err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_START_TIME, sizeof (start_time), 1, &start_time); if (err != 0 && err != ENOENT) return (err); err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_END_TIME, sizeof (end_time), 1, &end_time); if (err != 0 && err != ENOENT) return (err); err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_RAIDZ_EXPAND_BYTES_COPIED, sizeof (bytes_copied), 1, &bytes_copied); if (err != 0 && err != ENOENT) return (err); } /* * If we are in the middle of expansion, vre_state should have * already been set by vdev_raidz_init(). */ EQUIV(vdrz->vn_vre.vre_state == DSS_SCANNING, state == DSS_SCANNING); vdrz->vn_vre.vre_state = (dsl_scan_state_t)state; vdrz->vn_vre.vre_start_time = start_time; vdrz->vn_vre.vre_end_time = end_time; vdrz->vn_vre.vre_bytes_copied = bytes_copied; return (0); } int spa_raidz_expand_get_stats(spa_t *spa, pool_raidz_expand_stat_t *pres) { vdev_raidz_expand_t *vre = spa->spa_raidz_expand; if (vre == NULL) { /* no removal in progress; find most recent completed */ for (int c = 0; c < spa->spa_root_vdev->vdev_children; c++) { vdev_t *vd = spa->spa_root_vdev->vdev_child[c]; if (vd->vdev_ops == &vdev_raidz_ops) { vdev_raidz_t *vdrz = vd->vdev_tsd; if (vdrz->vn_vre.vre_end_time != 0 && (vre == NULL || vdrz->vn_vre.vre_end_time > vre->vre_end_time)) { vre = &vdrz->vn_vre; } } } } if (vre == NULL) { return (SET_ERROR(ENOENT)); } pres->pres_state = vre->vre_state; pres->pres_expanding_vdev = vre->vre_vdev_id; vdev_t *vd = vdev_lookup_top(spa, vre->vre_vdev_id); pres->pres_to_reflow = vd->vdev_stat.vs_alloc; mutex_enter(&vre->vre_lock); pres->pres_reflowed = vre->vre_bytes_copied; for (int i = 0; i < TXG_SIZE; i++) pres->pres_reflowed += vre->vre_bytes_copied_pertxg[i]; mutex_exit(&vre->vre_lock); pres->pres_start_time = vre->vre_start_time; pres->pres_end_time = vre->vre_end_time; pres->pres_waiting_for_resilver = vre->vre_waiting_for_resilver; return (0); } /* * Initialize private RAIDZ specific fields from the nvlist. */ static int vdev_raidz_init(spa_t *spa, nvlist_t *nv, void **tsd) { uint_t children; nvlist_t **child; int error = nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children); if (error != 0) return (SET_ERROR(EINVAL)); uint64_t nparity; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &nparity) == 0) { if (nparity == 0 || nparity > VDEV_RAIDZ_MAXPARITY) return (SET_ERROR(EINVAL)); /* * Previous versions could only support 1 or 2 parity * device. */ if (nparity > 1 && spa_version(spa) < SPA_VERSION_RAIDZ2) return (SET_ERROR(EINVAL)); else if (nparity > 2 && spa_version(spa) < SPA_VERSION_RAIDZ3) return (SET_ERROR(EINVAL)); } else { /* * We require the parity to be specified for SPAs that * support multiple parity levels. */ if (spa_version(spa) >= SPA_VERSION_RAIDZ2) return (SET_ERROR(EINVAL)); /* * Otherwise, we default to 1 parity device for RAID-Z. */ nparity = 1; } vdev_raidz_t *vdrz = kmem_zalloc(sizeof (*vdrz), KM_SLEEP); vdrz->vn_vre.vre_vdev_id = -1; vdrz->vn_vre.vre_offset = UINT64_MAX; vdrz->vn_vre.vre_failed_offset = UINT64_MAX; mutex_init(&vdrz->vn_vre.vre_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&vdrz->vn_vre.vre_cv, NULL, CV_DEFAULT, NULL); zfs_rangelock_init(&vdrz->vn_vre.vre_rangelock, NULL, NULL); mutex_init(&vdrz->vd_expand_lock, NULL, MUTEX_DEFAULT, NULL); avl_create(&vdrz->vd_expand_txgs, vdev_raidz_reflow_compare, sizeof (reflow_node_t), offsetof(reflow_node_t, re_link)); vdrz->vd_physical_width = children; vdrz->vd_nparity = nparity; /* note, the ID does not exist when creating a pool */ (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID, &vdrz->vn_vre.vre_vdev_id); boolean_t reflow_in_progress = nvlist_exists(nv, ZPOOL_CONFIG_RAIDZ_EXPANDING); if (reflow_in_progress) { spa->spa_raidz_expand = &vdrz->vn_vre; vdrz->vn_vre.vre_state = DSS_SCANNING; } vdrz->vd_original_width = children; uint64_t *txgs; unsigned int txgs_size = 0; error = nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_RAIDZ_EXPAND_TXGS, &txgs, &txgs_size); if (error == 0) { for (int i = 0; i < txgs_size; i++) { reflow_node_t *re = kmem_zalloc(sizeof (*re), KM_SLEEP); re->re_txg = txgs[txgs_size - i - 1]; re->re_logical_width = vdrz->vd_physical_width - i; if (reflow_in_progress) re->re_logical_width--; avl_add(&vdrz->vd_expand_txgs, re); } vdrz->vd_original_width = vdrz->vd_physical_width - txgs_size; } if (reflow_in_progress) { vdrz->vd_original_width--; zfs_dbgmsg("reflow_in_progress, %u wide, %d prior expansions", children, txgs_size); } *tsd = vdrz; return (0); } static void vdev_raidz_fini(vdev_t *vd) { vdev_raidz_t *vdrz = vd->vdev_tsd; if (vd->vdev_spa->spa_raidz_expand == &vdrz->vn_vre) vd->vdev_spa->spa_raidz_expand = NULL; reflow_node_t *re; void *cookie = NULL; avl_tree_t *tree = &vdrz->vd_expand_txgs; while ((re = avl_destroy_nodes(tree, &cookie)) != NULL) kmem_free(re, sizeof (*re)); avl_destroy(&vdrz->vd_expand_txgs); mutex_destroy(&vdrz->vd_expand_lock); mutex_destroy(&vdrz->vn_vre.vre_lock); cv_destroy(&vdrz->vn_vre.vre_cv); zfs_rangelock_fini(&vdrz->vn_vre.vre_rangelock); kmem_free(vdrz, sizeof (*vdrz)); } /* * Add RAIDZ specific fields to the config nvlist. */ static void vdev_raidz_config_generate(vdev_t *vd, nvlist_t *nv) { ASSERT3P(vd->vdev_ops, ==, &vdev_raidz_ops); vdev_raidz_t *vdrz = vd->vdev_tsd; /* * Make sure someone hasn't managed to sneak a fancy new vdev * into a crufty old storage pool. */ ASSERT(vdrz->vd_nparity == 1 || (vdrz->vd_nparity <= 2 && spa_version(vd->vdev_spa) >= SPA_VERSION_RAIDZ2) || (vdrz->vd_nparity <= 3 && spa_version(vd->vdev_spa) >= SPA_VERSION_RAIDZ3)); /* * Note that we'll add these even on storage pools where they * aren't strictly required -- older software will just ignore * it. */ fnvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, vdrz->vd_nparity); if (vdrz->vn_vre.vre_state == DSS_SCANNING) { fnvlist_add_boolean(nv, ZPOOL_CONFIG_RAIDZ_EXPANDING); } mutex_enter(&vdrz->vd_expand_lock); if (!avl_is_empty(&vdrz->vd_expand_txgs)) { uint64_t count = avl_numnodes(&vdrz->vd_expand_txgs); uint64_t *txgs = kmem_alloc(sizeof (uint64_t) * count, KM_SLEEP); uint64_t i = 0; for (reflow_node_t *re = avl_first(&vdrz->vd_expand_txgs); re != NULL; re = AVL_NEXT(&vdrz->vd_expand_txgs, re)) { txgs[i++] = re->re_txg; } fnvlist_add_uint64_array(nv, ZPOOL_CONFIG_RAIDZ_EXPAND_TXGS, txgs, count); kmem_free(txgs, sizeof (uint64_t) * count); } mutex_exit(&vdrz->vd_expand_lock); } static uint64_t vdev_raidz_nparity(vdev_t *vd) { vdev_raidz_t *vdrz = vd->vdev_tsd; return (vdrz->vd_nparity); } static uint64_t vdev_raidz_ndisks(vdev_t *vd) { return (vd->vdev_children); } vdev_ops_t vdev_raidz_ops = { .vdev_op_init = vdev_raidz_init, .vdev_op_fini = vdev_raidz_fini, .vdev_op_open = vdev_raidz_open, .vdev_op_close = vdev_raidz_close, .vdev_op_asize = vdev_raidz_asize, .vdev_op_min_asize = vdev_raidz_min_asize, .vdev_op_min_alloc = NULL, .vdev_op_io_start = vdev_raidz_io_start, .vdev_op_io_done = vdev_raidz_io_done, .vdev_op_state_change = vdev_raidz_state_change, .vdev_op_need_resilver = vdev_raidz_need_resilver, .vdev_op_hold = NULL, .vdev_op_rele = NULL, .vdev_op_remap = NULL, .vdev_op_xlate = vdev_raidz_xlate, .vdev_op_rebuild_asize = NULL, .vdev_op_metaslab_init = NULL, .vdev_op_config_generate = vdev_raidz_config_generate, .vdev_op_nparity = vdev_raidz_nparity, .vdev_op_ndisks = vdev_raidz_ndisks, .vdev_op_type = VDEV_TYPE_RAIDZ, /* name of this vdev type */ .vdev_op_leaf = B_FALSE /* not a leaf vdev */ }; /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs_vdev, raidz_, expand_max_reflow_bytes, ULONG, ZMOD_RW, "For testing, pause RAIDZ expansion after reflowing this many bytes"); ZFS_MODULE_PARAM(zfs_vdev, raidz_, expand_max_copy_bytes, ULONG, ZMOD_RW, "Max amount of concurrent i/o for RAIDZ expansion"); ZFS_MODULE_PARAM(zfs_vdev, raidz_, io_aggregate_rows, ULONG, ZMOD_RW, "For expanded RAIDZ, aggregate reads that have more rows than this"); ZFS_MODULE_PARAM(zfs, zfs_, scrub_after_expand, INT, ZMOD_RW, "For expanded RAIDZ, automatically start a pool scrub when expansion " "completes"); /* END CSTYLED */