diff --git a/sys/kern/subr_bus.c b/sys/kern/subr_bus.c index 38c646593a85..5965b8941b54 100644 --- a/sys/kern/subr_bus.c +++ b/sys/kern/subr_bus.c @@ -1,6070 +1,6068 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 1997,1998,2003 Doug Rabson * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include "opt_bus.h" #include "opt_ddb.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include SYSCTL_NODE(_hw, OID_AUTO, bus, CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, NULL); SYSCTL_ROOT_NODE(OID_AUTO, dev, CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, NULL); static bool disable_failed_devs = false; SYSCTL_BOOL(_hw_bus, OID_AUTO, disable_failed_devices, CTLFLAG_RWTUN, &disable_failed_devs, 0, "Do not retry attaching devices that return an error from DEVICE_ATTACH the first time"); /* * Used to attach drivers to devclasses. */ typedef struct driverlink *driverlink_t; struct driverlink { kobj_class_t driver; TAILQ_ENTRY(driverlink) link; /* list of drivers in devclass */ int pass; int flags; #define DL_DEFERRED_PROBE 1 /* Probe deferred on this */ TAILQ_ENTRY(driverlink) passlink; }; /* * Forward declarations */ typedef TAILQ_HEAD(devclass_list, devclass) devclass_list_t; typedef TAILQ_HEAD(driver_list, driverlink) driver_list_t; typedef TAILQ_HEAD(device_list, _device) device_list_t; struct devclass { TAILQ_ENTRY(devclass) link; devclass_t parent; /* parent in devclass hierarchy */ driver_list_t drivers; /* bus devclasses store drivers for bus */ char *name; device_t *devices; /* array of devices indexed by unit */ int maxunit; /* size of devices array */ int flags; #define DC_HAS_CHILDREN 1 struct sysctl_ctx_list sysctl_ctx; struct sysctl_oid *sysctl_tree; }; /** * @brief Implementation of _device. * * The structure is named "_device" instead of "device" to avoid type confusion * caused by other subsystems defining a (struct device). */ struct _device { /* * A device is a kernel object. The first field must be the * current ops table for the object. */ KOBJ_FIELDS; /* * Device hierarchy. */ TAILQ_ENTRY(_device) link; /**< list of devices in parent */ TAILQ_ENTRY(_device) devlink; /**< global device list membership */ device_t parent; /**< parent of this device */ device_list_t children; /**< list of child devices */ /* * Details of this device. */ driver_t *driver; /**< current driver */ devclass_t devclass; /**< current device class */ int unit; /**< current unit number */ char* nameunit; /**< name+unit e.g. foodev0 */ char* desc; /**< driver specific description */ u_int busy; /**< count of calls to device_busy() */ device_state_t state; /**< current device state */ uint32_t devflags; /**< api level flags for device_get_flags() */ u_int flags; /**< internal device flags */ u_int order; /**< order from device_add_child_ordered() */ void *ivars; /**< instance variables */ void *softc; /**< current driver's variables */ struct sysctl_ctx_list sysctl_ctx; /**< state for sysctl variables */ struct sysctl_oid *sysctl_tree; /**< state for sysctl variables */ }; static MALLOC_DEFINE(M_BUS, "bus", "Bus data structures"); static MALLOC_DEFINE(M_BUS_SC, "bus-sc", "Bus data structures, softc"); EVENTHANDLER_LIST_DEFINE(device_attach); EVENTHANDLER_LIST_DEFINE(device_detach); EVENTHANDLER_LIST_DEFINE(device_nomatch); EVENTHANDLER_LIST_DEFINE(dev_lookup); static void devctl2_init(void); static bool device_frozen; #define DRIVERNAME(d) ((d)? d->name : "no driver") #define DEVCLANAME(d) ((d)? d->name : "no devclass") #ifdef BUS_DEBUG static int bus_debug = 1; SYSCTL_INT(_debug, OID_AUTO, bus_debug, CTLFLAG_RWTUN, &bus_debug, 0, "Bus debug level"); #define PDEBUG(a) if (bus_debug) {printf("%s:%d: ", __func__, __LINE__), printf a; printf("\n");} #define DEVICENAME(d) ((d)? device_get_name(d): "no device") /** * Produce the indenting, indent*2 spaces plus a '.' ahead of that to * prevent syslog from deleting initial spaces */ #define indentprintf(p) do { int iJ; printf("."); for (iJ=0; iJparent ? dc->parent->name : ""; break; default: return (EINVAL); } return (SYSCTL_OUT_STR(req, value)); } static void devclass_sysctl_init(devclass_t dc) { if (dc->sysctl_tree != NULL) return; sysctl_ctx_init(&dc->sysctl_ctx); dc->sysctl_tree = SYSCTL_ADD_NODE(&dc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_dev), OID_AUTO, dc->name, CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, ""); SYSCTL_ADD_PROC(&dc->sysctl_ctx, SYSCTL_CHILDREN(dc->sysctl_tree), OID_AUTO, "%parent", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dc, DEVCLASS_SYSCTL_PARENT, devclass_sysctl_handler, "A", "parent class"); } enum { DEVICE_SYSCTL_DESC, DEVICE_SYSCTL_DRIVER, DEVICE_SYSCTL_LOCATION, DEVICE_SYSCTL_PNPINFO, DEVICE_SYSCTL_PARENT, }; static int device_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct sbuf sb; device_t dev = (device_t)arg1; int error; sbuf_new_for_sysctl(&sb, NULL, 1024, req); sbuf_clear_flags(&sb, SBUF_INCLUDENUL); bus_topo_lock(); switch (arg2) { case DEVICE_SYSCTL_DESC: sbuf_cat(&sb, dev->desc ? dev->desc : ""); break; case DEVICE_SYSCTL_DRIVER: sbuf_cat(&sb, dev->driver ? dev->driver->name : ""); break; case DEVICE_SYSCTL_LOCATION: bus_child_location(dev, &sb); break; case DEVICE_SYSCTL_PNPINFO: bus_child_pnpinfo(dev, &sb); break; case DEVICE_SYSCTL_PARENT: sbuf_cat(&sb, dev->parent ? dev->parent->nameunit : ""); break; default: error = EINVAL; goto out; } error = sbuf_finish(&sb); out: bus_topo_unlock(); sbuf_delete(&sb); return (error); } static void device_sysctl_init(device_t dev) { devclass_t dc = dev->devclass; int domain; if (dev->sysctl_tree != NULL) return; devclass_sysctl_init(dc); sysctl_ctx_init(&dev->sysctl_ctx); dev->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&dev->sysctl_ctx, SYSCTL_CHILDREN(dc->sysctl_tree), OID_AUTO, dev->nameunit + strlen(dc->name), CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "", "device_index"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%desc", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dev, DEVICE_SYSCTL_DESC, device_sysctl_handler, "A", "device description"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%driver", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dev, DEVICE_SYSCTL_DRIVER, device_sysctl_handler, "A", "device driver name"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%location", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dev, DEVICE_SYSCTL_LOCATION, device_sysctl_handler, "A", "device location relative to parent"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%pnpinfo", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dev, DEVICE_SYSCTL_PNPINFO, device_sysctl_handler, "A", "device identification"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%parent", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, dev, DEVICE_SYSCTL_PARENT, device_sysctl_handler, "A", "parent device"); if (bus_get_domain(dev, &domain) == 0) SYSCTL_ADD_INT(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%domain", CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, domain, "NUMA domain"); } static void device_sysctl_update(device_t dev) { devclass_t dc = dev->devclass; if (dev->sysctl_tree == NULL) return; sysctl_rename_oid(dev->sysctl_tree, dev->nameunit + strlen(dc->name)); } static void device_sysctl_fini(device_t dev) { if (dev->sysctl_tree == NULL) return; sysctl_ctx_free(&dev->sysctl_ctx); dev->sysctl_tree = NULL; } static struct device_list bus_data_devices; static int bus_data_generation = 1; static kobj_method_t null_methods[] = { KOBJMETHOD_END }; DEFINE_CLASS(null, null_methods, 0); void bus_topo_assert(void) { GIANT_REQUIRED; } struct mtx * bus_topo_mtx(void) { return (&Giant); } void bus_topo_lock(void) { mtx_lock(bus_topo_mtx()); } void bus_topo_unlock(void) { mtx_unlock(bus_topo_mtx()); } /* * Bus pass implementation */ static driver_list_t passes = TAILQ_HEAD_INITIALIZER(passes); int bus_current_pass = BUS_PASS_ROOT; /** * @internal * @brief Register the pass level of a new driver attachment * * Register a new driver attachment's pass level. If no driver * attachment with the same pass level has been added, then @p new * will be added to the global passes list. * * @param new the new driver attachment */ static void driver_register_pass(struct driverlink *new) { struct driverlink *dl; /* We only consider pass numbers during boot. */ if (bus_current_pass == BUS_PASS_DEFAULT) return; /* * Walk the passes list. If we already know about this pass * then there is nothing to do. If we don't, then insert this * driver link into the list. */ TAILQ_FOREACH(dl, &passes, passlink) { if (dl->pass < new->pass) continue; if (dl->pass == new->pass) return; TAILQ_INSERT_BEFORE(dl, new, passlink); return; } TAILQ_INSERT_TAIL(&passes, new, passlink); } /** * @brief Raise the current bus pass * * Raise the current bus pass level to @p pass. Call the BUS_NEW_PASS() * method on the root bus to kick off a new device tree scan for each * new pass level that has at least one driver. */ void bus_set_pass(int pass) { struct driverlink *dl; if (bus_current_pass > pass) panic("Attempt to lower bus pass level"); TAILQ_FOREACH(dl, &passes, passlink) { /* Skip pass values below the current pass level. */ if (dl->pass <= bus_current_pass) continue; /* * Bail once we hit a driver with a pass level that is * too high. */ if (dl->pass > pass) break; /* * Raise the pass level to the next level and rescan * the tree. */ bus_current_pass = dl->pass; BUS_NEW_PASS(root_bus); } /* * If there isn't a driver registered for the requested pass, * then bus_current_pass might still be less than 'pass'. Set * it to 'pass' in that case. */ if (bus_current_pass < pass) bus_current_pass = pass; KASSERT(bus_current_pass == pass, ("Failed to update bus pass level")); } /* * Devclass implementation */ static devclass_list_t devclasses = TAILQ_HEAD_INITIALIZER(devclasses); /** * @internal * @brief Find or create a device class * * If a device class with the name @p classname exists, return it, * otherwise if @p create is non-zero create and return a new device * class. * * If @p parentname is non-NULL, the parent of the devclass is set to * the devclass of that name. * * @param classname the devclass name to find or create * @param parentname the parent devclass name or @c NULL * @param create non-zero to create a devclass */ static devclass_t devclass_find_internal(const char *classname, const char *parentname, int create) { devclass_t dc; PDEBUG(("looking for %s", classname)); if (!classname) return (NULL); TAILQ_FOREACH(dc, &devclasses, link) { if (!strcmp(dc->name, classname)) break; } if (create && !dc) { PDEBUG(("creating %s", classname)); dc = malloc(sizeof(struct devclass) + strlen(classname) + 1, M_BUS, M_NOWAIT | M_ZERO); if (!dc) return (NULL); dc->parent = NULL; dc->name = (char*) (dc + 1); strcpy(dc->name, classname); TAILQ_INIT(&dc->drivers); TAILQ_INSERT_TAIL(&devclasses, dc, link); bus_data_generation_update(); } /* * If a parent class is specified, then set that as our parent so * that this devclass will support drivers for the parent class as * well. If the parent class has the same name don't do this though * as it creates a cycle that can trigger an infinite loop in * device_probe_child() if a device exists for which there is no * suitable driver. */ if (parentname && dc && !dc->parent && strcmp(classname, parentname) != 0) { dc->parent = devclass_find_internal(parentname, NULL, TRUE); dc->parent->flags |= DC_HAS_CHILDREN; } return (dc); } /** * @brief Create a device class * * If a device class with the name @p classname exists, return it, * otherwise create and return a new device class. * * @param classname the devclass name to find or create */ devclass_t devclass_create(const char *classname) { return (devclass_find_internal(classname, NULL, TRUE)); } /** * @brief Find a device class * * If a device class with the name @p classname exists, return it, * otherwise return @c NULL. * * @param classname the devclass name to find */ devclass_t devclass_find(const char *classname) { return (devclass_find_internal(classname, NULL, FALSE)); } /** * @brief Register that a device driver has been added to a devclass * * Register that a device driver has been added to a devclass. This * is called by devclass_add_driver to accomplish the recursive * notification of all the children classes of dc, as well as dc. * Each layer will have BUS_DRIVER_ADDED() called for all instances of * the devclass. * * We do a full search here of the devclass list at each iteration * level to save storing children-lists in the devclass structure. If * we ever move beyond a few dozen devices doing this, we may need to * reevaluate... * * @param dc the devclass to edit * @param driver the driver that was just added */ static void devclass_driver_added(devclass_t dc, driver_t *driver) { devclass_t parent; int i; /* * Call BUS_DRIVER_ADDED for any existing buses in this class. */ for (i = 0; i < dc->maxunit; i++) if (dc->devices[i] && device_is_attached(dc->devices[i])) BUS_DRIVER_ADDED(dc->devices[i], driver); /* * Walk through the children classes. Since we only keep a * single parent pointer around, we walk the entire list of * devclasses looking for children. We set the * DC_HAS_CHILDREN flag when a child devclass is created on * the parent, so we only walk the list for those devclasses * that have children. */ if (!(dc->flags & DC_HAS_CHILDREN)) return; parent = dc; TAILQ_FOREACH(dc, &devclasses, link) { if (dc->parent == parent) devclass_driver_added(dc, driver); } } static void device_handle_nomatch(device_t dev) { BUS_PROBE_NOMATCH(dev->parent, dev); EVENTHANDLER_DIRECT_INVOKE(device_nomatch, dev); dev->flags |= DF_DONENOMATCH; } /** * @brief Add a device driver to a device class * * Add a device driver to a devclass. This is normally called * automatically by DRIVER_MODULE(). The BUS_DRIVER_ADDED() method of * all devices in the devclass will be called to allow them to attempt * to re-probe any unmatched children. * * @param dc the devclass to edit * @param driver the driver to register */ int devclass_add_driver(devclass_t dc, driver_t *driver, int pass, devclass_t *dcp) { driverlink_t dl; devclass_t child_dc; const char *parentname; PDEBUG(("%s", DRIVERNAME(driver))); /* Don't allow invalid pass values. */ if (pass <= BUS_PASS_ROOT) return (EINVAL); dl = malloc(sizeof *dl, M_BUS, M_NOWAIT|M_ZERO); if (!dl) return (ENOMEM); /* * Compile the driver's methods. Also increase the reference count * so that the class doesn't get freed when the last instance * goes. This means we can safely use static methods and avoids a * double-free in devclass_delete_driver. */ kobj_class_compile((kobj_class_t) driver); /* * If the driver has any base classes, make the * devclass inherit from the devclass of the driver's * first base class. This will allow the system to * search for drivers in both devclasses for children * of a device using this driver. */ if (driver->baseclasses) parentname = driver->baseclasses[0]->name; else parentname = NULL; child_dc = devclass_find_internal(driver->name, parentname, TRUE); if (dcp != NULL) *dcp = child_dc; dl->driver = driver; TAILQ_INSERT_TAIL(&dc->drivers, dl, link); driver->refs++; /* XXX: kobj_mtx */ dl->pass = pass; driver_register_pass(dl); if (device_frozen) { dl->flags |= DL_DEFERRED_PROBE; } else { devclass_driver_added(dc, driver); } bus_data_generation_update(); return (0); } /** * @brief Register that a device driver has been deleted from a devclass * * Register that a device driver has been removed from a devclass. * This is called by devclass_delete_driver to accomplish the * recursive notification of all the children classes of busclass, as * well as busclass. Each layer will attempt to detach the driver * from any devices that are children of the bus's devclass. The function * will return an error if a device fails to detach. * * We do a full search here of the devclass list at each iteration * level to save storing children-lists in the devclass structure. If * we ever move beyond a few dozen devices doing this, we may need to * reevaluate... * * @param busclass the devclass of the parent bus * @param dc the devclass of the driver being deleted * @param driver the driver being deleted */ static int devclass_driver_deleted(devclass_t busclass, devclass_t dc, driver_t *driver) { devclass_t parent; device_t dev; int error, i; /* * Disassociate from any devices. We iterate through all the * devices in the devclass of the driver and detach any which are * using the driver and which have a parent in the devclass which * we are deleting from. * * Note that since a driver can be in multiple devclasses, we * should not detach devices which are not children of devices in * the affected devclass. * * If we're frozen, we don't generate NOMATCH events. Mark to * generate later. */ for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { dev = dc->devices[i]; if (dev->driver == driver && dev->parent && dev->parent->devclass == busclass) { if ((error = device_detach(dev)) != 0) return (error); if (device_frozen) { dev->flags &= ~DF_DONENOMATCH; dev->flags |= DF_NEEDNOMATCH; } else { device_handle_nomatch(dev); } } } } /* * Walk through the children classes. Since we only keep a * single parent pointer around, we walk the entire list of * devclasses looking for children. We set the * DC_HAS_CHILDREN flag when a child devclass is created on * the parent, so we only walk the list for those devclasses * that have children. */ if (!(busclass->flags & DC_HAS_CHILDREN)) return (0); parent = busclass; TAILQ_FOREACH(busclass, &devclasses, link) { if (busclass->parent == parent) { error = devclass_driver_deleted(busclass, dc, driver); if (error) return (error); } } return (0); } /** * @brief Delete a device driver from a device class * * Delete a device driver from a devclass. This is normally called * automatically by DRIVER_MODULE(). * * If the driver is currently attached to any devices, * devclass_delete_driver() will first attempt to detach from each * device. If one of the detach calls fails, the driver will not be * deleted. * * @param dc the devclass to edit * @param driver the driver to unregister */ int devclass_delete_driver(devclass_t busclass, driver_t *driver) { devclass_t dc = devclass_find(driver->name); driverlink_t dl; int error; PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass))); if (!dc) return (0); /* * Find the link structure in the bus' list of drivers. */ TAILQ_FOREACH(dl, &busclass->drivers, link) { if (dl->driver == driver) break; } if (!dl) { PDEBUG(("%s not found in %s list", driver->name, busclass->name)); return (ENOENT); } error = devclass_driver_deleted(busclass, dc, driver); if (error != 0) return (error); TAILQ_REMOVE(&busclass->drivers, dl, link); free(dl, M_BUS); /* XXX: kobj_mtx */ driver->refs--; if (driver->refs == 0) kobj_class_free((kobj_class_t) driver); bus_data_generation_update(); return (0); } /** * @brief Quiesces a set of device drivers from a device class * * Quiesce a device driver from a devclass. This is normally called * automatically by DRIVER_MODULE(). * * If the driver is currently attached to any devices, * devclass_quiesece_driver() will first attempt to quiesce each * device. * * @param dc the devclass to edit * @param driver the driver to unregister */ static int devclass_quiesce_driver(devclass_t busclass, driver_t *driver) { devclass_t dc = devclass_find(driver->name); driverlink_t dl; device_t dev; int i; int error; PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass))); if (!dc) return (0); /* * Find the link structure in the bus' list of drivers. */ TAILQ_FOREACH(dl, &busclass->drivers, link) { if (dl->driver == driver) break; } if (!dl) { PDEBUG(("%s not found in %s list", driver->name, busclass->name)); return (ENOENT); } /* * Quiesce all devices. We iterate through all the devices in * the devclass of the driver and quiesce any which are using * the driver and which have a parent in the devclass which we * are quiescing. * * Note that since a driver can be in multiple devclasses, we * should not quiesce devices which are not children of * devices in the affected devclass. */ for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { dev = dc->devices[i]; if (dev->driver == driver && dev->parent && dev->parent->devclass == busclass) { if ((error = device_quiesce(dev)) != 0) return (error); } } } return (0); } /** * @internal */ static driverlink_t devclass_find_driver_internal(devclass_t dc, const char *classname) { driverlink_t dl; PDEBUG(("%s in devclass %s", classname, DEVCLANAME(dc))); TAILQ_FOREACH(dl, &dc->drivers, link) { if (!strcmp(dl->driver->name, classname)) return (dl); } PDEBUG(("not found")); return (NULL); } /** * @brief Return the name of the devclass */ const char * devclass_get_name(devclass_t dc) { return (dc->name); } /** * @brief Find a device given a unit number * * @param dc the devclass to search * @param unit the unit number to search for * * @returns the device with the given unit number or @c * NULL if there is no such device */ device_t devclass_get_device(devclass_t dc, int unit) { if (dc == NULL || unit < 0 || unit >= dc->maxunit) return (NULL); return (dc->devices[unit]); } /** * @brief Find the softc field of a device given a unit number * * @param dc the devclass to search * @param unit the unit number to search for * * @returns the softc field of the device with the given * unit number or @c NULL if there is no such * device */ void * devclass_get_softc(devclass_t dc, int unit) { device_t dev; dev = devclass_get_device(dc, unit); if (!dev) return (NULL); return (device_get_softc(dev)); } /** * @brief Get a list of devices in the devclass * * An array containing a list of all the devices in the given devclass * is allocated and returned in @p *devlistp. The number of devices * in the array is returned in @p *devcountp. The caller should free * the array using @c free(p, M_TEMP), even if @p *devcountp is 0. * * @param dc the devclass to examine * @param devlistp points at location for array pointer return * value * @param devcountp points at location for array size return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int devclass_get_devices(devclass_t dc, device_t **devlistp, int *devcountp) { int count, i; device_t *list; count = devclass_get_count(dc); list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO); if (!list) return (ENOMEM); count = 0; for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { list[count] = dc->devices[i]; count++; } } *devlistp = list; *devcountp = count; return (0); } /** * @brief Get a list of drivers in the devclass * * An array containing a list of pointers to all the drivers in the * given devclass is allocated and returned in @p *listp. The number * of drivers in the array is returned in @p *countp. The caller should * free the array using @c free(p, M_TEMP). * * @param dc the devclass to examine * @param listp gives location for array pointer return value * @param countp gives location for number of array elements * return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int devclass_get_drivers(devclass_t dc, driver_t ***listp, int *countp) { driverlink_t dl; driver_t **list; int count; count = 0; TAILQ_FOREACH(dl, &dc->drivers, link) count++; list = malloc(count * sizeof(driver_t *), M_TEMP, M_NOWAIT); if (list == NULL) return (ENOMEM); count = 0; TAILQ_FOREACH(dl, &dc->drivers, link) { list[count] = dl->driver; count++; } *listp = list; *countp = count; return (0); } /** * @brief Get the number of devices in a devclass * * @param dc the devclass to examine */ int devclass_get_count(devclass_t dc) { int count, i; count = 0; for (i = 0; i < dc->maxunit; i++) if (dc->devices[i]) count++; return (count); } /** * @brief Get the maximum unit number used in a devclass * * Note that this is one greater than the highest currently-allocated * unit. If a null devclass_t is passed in, -1 is returned to indicate * that not even the devclass has been allocated yet. * * @param dc the devclass to examine */ int devclass_get_maxunit(devclass_t dc) { if (dc == NULL) return (-1); return (dc->maxunit); } /** * @brief Find a free unit number in a devclass * * This function searches for the first unused unit number greater * that or equal to @p unit. * * @param dc the devclass to examine * @param unit the first unit number to check */ int devclass_find_free_unit(devclass_t dc, int unit) { if (dc == NULL) return (unit); while (unit < dc->maxunit && dc->devices[unit] != NULL) unit++; return (unit); } /** * @brief Set the parent of a devclass * * The parent class is normally initialised automatically by * DRIVER_MODULE(). * * @param dc the devclass to edit * @param pdc the new parent devclass */ void devclass_set_parent(devclass_t dc, devclass_t pdc) { dc->parent = pdc; } /** * @brief Get the parent of a devclass * * @param dc the devclass to examine */ devclass_t devclass_get_parent(devclass_t dc) { return (dc->parent); } struct sysctl_ctx_list * devclass_get_sysctl_ctx(devclass_t dc) { return (&dc->sysctl_ctx); } struct sysctl_oid * devclass_get_sysctl_tree(devclass_t dc) { return (dc->sysctl_tree); } /** * @internal * @brief Allocate a unit number * * On entry, @p *unitp is the desired unit number (or @c -1 if any * will do). The allocated unit number is returned in @p *unitp. * @param dc the devclass to allocate from * @param unitp points at the location for the allocated unit * number * * @retval 0 success * @retval EEXIST the requested unit number is already allocated * @retval ENOMEM memory allocation failure */ static int devclass_alloc_unit(devclass_t dc, device_t dev, int *unitp) { const char *s; int unit = *unitp; PDEBUG(("unit %d in devclass %s", unit, DEVCLANAME(dc))); /* Ask the parent bus if it wants to wire this device. */ if (unit == -1) BUS_HINT_DEVICE_UNIT(device_get_parent(dev), dev, dc->name, &unit); /* If we were given a wired unit number, check for existing device */ /* XXX imp XXX */ if (unit != -1) { if (unit >= 0 && unit < dc->maxunit && dc->devices[unit] != NULL) { if (bootverbose) printf("%s: %s%d already exists; skipping it\n", dc->name, dc->name, *unitp); return (EEXIST); } } else { /* Unwired device, find the next available slot for it */ unit = 0; for (unit = 0;; unit++) { /* If this device slot is already in use, skip it. */ if (unit < dc->maxunit && dc->devices[unit] != NULL) continue; /* If there is an "at" hint for a unit then skip it. */ if (resource_string_value(dc->name, unit, "at", &s) == 0) continue; break; } } /* * We've selected a unit beyond the length of the table, so let's * extend the table to make room for all units up to and including * this one. */ if (unit >= dc->maxunit) { device_t *newlist, *oldlist; int newsize; oldlist = dc->devices; newsize = roundup((unit + 1), MAX(1, MINALLOCSIZE / sizeof(device_t))); newlist = malloc(sizeof(device_t) * newsize, M_BUS, M_NOWAIT); if (!newlist) return (ENOMEM); if (oldlist != NULL) bcopy(oldlist, newlist, sizeof(device_t) * dc->maxunit); bzero(newlist + dc->maxunit, sizeof(device_t) * (newsize - dc->maxunit)); dc->devices = newlist; dc->maxunit = newsize; if (oldlist != NULL) free(oldlist, M_BUS); } PDEBUG(("now: unit %d in devclass %s", unit, DEVCLANAME(dc))); *unitp = unit; return (0); } /** * @internal * @brief Add a device to a devclass * * A unit number is allocated for the device (using the device's * preferred unit number if any) and the device is registered in the * devclass. This allows the device to be looked up by its unit * number, e.g. by decoding a dev_t minor number. * * @param dc the devclass to add to * @param dev the device to add * * @retval 0 success * @retval EEXIST the requested unit number is already allocated * @retval ENOMEM memory allocation failure */ static int devclass_add_device(devclass_t dc, device_t dev) { int buflen, error; PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc))); buflen = snprintf(NULL, 0, "%s%d$", dc->name, INT_MAX); if (buflen < 0) return (ENOMEM); dev->nameunit = malloc(buflen, M_BUS, M_NOWAIT|M_ZERO); if (!dev->nameunit) return (ENOMEM); if ((error = devclass_alloc_unit(dc, dev, &dev->unit)) != 0) { free(dev->nameunit, M_BUS); dev->nameunit = NULL; return (error); } dc->devices[dev->unit] = dev; dev->devclass = dc; snprintf(dev->nameunit, buflen, "%s%d", dc->name, dev->unit); return (0); } /** * @internal * @brief Delete a device from a devclass * * The device is removed from the devclass's device list and its unit * number is freed. * @param dc the devclass to delete from * @param dev the device to delete * * @retval 0 success */ static int devclass_delete_device(devclass_t dc, device_t dev) { if (!dc || !dev) return (0); PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc))); if (dev->devclass != dc || dc->devices[dev->unit] != dev) panic("devclass_delete_device: inconsistent device class"); dc->devices[dev->unit] = NULL; if (dev->flags & DF_WILDCARD) dev->unit = -1; dev->devclass = NULL; free(dev->nameunit, M_BUS); dev->nameunit = NULL; return (0); } /** * @internal * @brief Make a new device and add it as a child of @p parent * * @param parent the parent of the new device * @param name the devclass name of the new device or @c NULL * to leave the devclass unspecified * @parem unit the unit number of the new device of @c -1 to * leave the unit number unspecified * * @returns the new device */ static device_t make_device(device_t parent, const char *name, int unit) { device_t dev; devclass_t dc; PDEBUG(("%s at %s as unit %d", name, DEVICENAME(parent), unit)); if (name) { dc = devclass_find_internal(name, NULL, TRUE); if (!dc) { printf("make_device: can't find device class %s\n", name); return (NULL); } } else { dc = NULL; } dev = malloc(sizeof(*dev), M_BUS, M_NOWAIT|M_ZERO); if (!dev) return (NULL); dev->parent = parent; TAILQ_INIT(&dev->children); kobj_init((kobj_t) dev, &null_class); dev->driver = NULL; dev->devclass = NULL; dev->unit = unit; dev->nameunit = NULL; dev->desc = NULL; dev->busy = 0; dev->devflags = 0; dev->flags = DF_ENABLED; dev->order = 0; if (unit == -1) dev->flags |= DF_WILDCARD; if (name) { dev->flags |= DF_FIXEDCLASS; if (devclass_add_device(dc, dev)) { kobj_delete((kobj_t) dev, M_BUS); return (NULL); } } if (parent != NULL && device_has_quiet_children(parent)) dev->flags |= DF_QUIET | DF_QUIET_CHILDREN; dev->ivars = NULL; dev->softc = NULL; dev->state = DS_NOTPRESENT; TAILQ_INSERT_TAIL(&bus_data_devices, dev, devlink); bus_data_generation_update(); return (dev); } /** * @internal * @brief Print a description of a device. */ static int device_print_child(device_t dev, device_t child) { int retval = 0; if (device_is_alive(child)) retval += BUS_PRINT_CHILD(dev, child); else retval += device_printf(child, " not found\n"); return (retval); } /** * @brief Create a new device * * This creates a new device and adds it as a child of an existing * parent device. The new device will be added after the last existing * child with order zero. * * @param dev the device which will be the parent of the * new child device * @param name devclass name for new device or @c NULL if not * specified * @param unit unit number for new device or @c -1 if not * specified * * @returns the new device */ device_t device_add_child(device_t dev, const char *name, int unit) { return (device_add_child_ordered(dev, 0, name, unit)); } /** * @brief Create a new device * * This creates a new device and adds it as a child of an existing * parent device. The new device will be added after the last existing * child with the same order. * * @param dev the device which will be the parent of the * new child device * @param order a value which is used to partially sort the * children of @p dev - devices created using * lower values of @p order appear first in @p * dev's list of children * @param name devclass name for new device or @c NULL if not * specified * @param unit unit number for new device or @c -1 if not * specified * * @returns the new device */ device_t device_add_child_ordered(device_t dev, u_int order, const char *name, int unit) { device_t child; device_t place; PDEBUG(("%s at %s with order %u as unit %d", name, DEVICENAME(dev), order, unit)); KASSERT(name != NULL || unit == -1, ("child device with wildcard name and specific unit number")); child = make_device(dev, name, unit); if (child == NULL) return (child); child->order = order; TAILQ_FOREACH(place, &dev->children, link) { if (place->order > order) break; } if (place) { /* * The device 'place' is the first device whose order is * greater than the new child. */ TAILQ_INSERT_BEFORE(place, child, link); } else { /* * The new child's order is greater or equal to the order of * any existing device. Add the child to the tail of the list. */ TAILQ_INSERT_TAIL(&dev->children, child, link); } bus_data_generation_update(); return (child); } /** * @brief Delete a device * * This function deletes a device along with all of its children. If * the device currently has a driver attached to it, the device is * detached first using device_detach(). * * @param dev the parent device * @param child the device to delete * * @retval 0 success * @retval non-zero a unit error code describing the error */ int device_delete_child(device_t dev, device_t child) { int error; device_t grandchild; PDEBUG(("%s from %s", DEVICENAME(child), DEVICENAME(dev))); /* detach parent before deleting children, if any */ if ((error = device_detach(child)) != 0) return (error); /* remove children second */ while ((grandchild = TAILQ_FIRST(&child->children)) != NULL) { error = device_delete_child(child, grandchild); if (error) return (error); } if (child->devclass) devclass_delete_device(child->devclass, child); if (child->parent) BUS_CHILD_DELETED(dev, child); TAILQ_REMOVE(&dev->children, child, link); TAILQ_REMOVE(&bus_data_devices, child, devlink); kobj_delete((kobj_t) child, M_BUS); bus_data_generation_update(); return (0); } /** * @brief Delete all children devices of the given device, if any. * * This function deletes all children devices of the given device, if * any, using the device_delete_child() function for each device it * finds. If a child device cannot be deleted, this function will * return an error code. * * @param dev the parent device * * @retval 0 success * @retval non-zero a device would not detach */ int device_delete_children(device_t dev) { device_t child; int error; PDEBUG(("Deleting all children of %s", DEVICENAME(dev))); error = 0; while ((child = TAILQ_FIRST(&dev->children)) != NULL) { error = device_delete_child(dev, child); if (error) { PDEBUG(("Failed deleting %s", DEVICENAME(child))); break; } } return (error); } /** * @brief Find a device given a unit number * * This is similar to devclass_get_devices() but only searches for * devices which have @p dev as a parent. * * @param dev the parent device to search * @param unit the unit number to search for. If the unit is -1, * return the first child of @p dev which has name * @p classname (that is, the one with the lowest unit.) * * @returns the device with the given unit number or @c * NULL if there is no such device */ device_t device_find_child(device_t dev, const char *classname, int unit) { devclass_t dc; device_t child; dc = devclass_find(classname); if (!dc) return (NULL); if (unit != -1) { child = devclass_get_device(dc, unit); if (child && child->parent == dev) return (child); } else { for (unit = 0; unit < devclass_get_maxunit(dc); unit++) { child = devclass_get_device(dc, unit); if (child && child->parent == dev) return (child); } } return (NULL); } /** * @internal */ static driverlink_t first_matching_driver(devclass_t dc, device_t dev) { if (dev->devclass) return (devclass_find_driver_internal(dc, dev->devclass->name)); return (TAILQ_FIRST(&dc->drivers)); } /** * @internal */ static driverlink_t next_matching_driver(devclass_t dc, device_t dev, driverlink_t last) { if (dev->devclass) { driverlink_t dl; for (dl = TAILQ_NEXT(last, link); dl; dl = TAILQ_NEXT(dl, link)) if (!strcmp(dev->devclass->name, dl->driver->name)) return (dl); return (NULL); } return (TAILQ_NEXT(last, link)); } /** * @internal */ int device_probe_child(device_t dev, device_t child) { devclass_t dc; driverlink_t best = NULL; driverlink_t dl; int result, pri = 0; /* We should preserve the devclass (or lack of) set by the bus. */ int hasclass = (child->devclass != NULL); bus_topo_assert(); dc = dev->devclass; if (!dc) panic("device_probe_child: parent device has no devclass"); /* * If the state is already probed, then return. */ if (child->state == DS_ALIVE) return (0); for (; dc; dc = dc->parent) { for (dl = first_matching_driver(dc, child); dl; dl = next_matching_driver(dc, child, dl)) { /* If this driver's pass is too high, then ignore it. */ if (dl->pass > bus_current_pass) continue; PDEBUG(("Trying %s", DRIVERNAME(dl->driver))); result = device_set_driver(child, dl->driver); if (result == ENOMEM) return (result); else if (result != 0) continue; if (!hasclass) { if (device_set_devclass(child, dl->driver->name) != 0) { char const * devname = device_get_name(child); if (devname == NULL) devname = "(unknown)"; printf("driver bug: Unable to set " "devclass (class: %s " "devname: %s)\n", dl->driver->name, devname); (void)device_set_driver(child, NULL); continue; } } /* Fetch any flags for the device before probing. */ resource_int_value(dl->driver->name, child->unit, "flags", &child->devflags); result = DEVICE_PROBE(child); /* * If the driver returns SUCCESS, there can be * no higher match for this device. */ if (result == 0) { best = dl; pri = 0; break; } /* Reset flags and devclass before the next probe. */ child->devflags = 0; if (!hasclass) (void)device_set_devclass(child, NULL); /* * Reset DF_QUIET in case this driver doesn't * end up as the best driver. */ device_verbose(child); /* * Probes that return BUS_PROBE_NOWILDCARD or lower * only match on devices whose driver was explicitly * specified. */ if (result <= BUS_PROBE_NOWILDCARD && !(child->flags & DF_FIXEDCLASS)) { result = ENXIO; } /* * The driver returned an error so it * certainly doesn't match. */ if (result > 0) { (void)device_set_driver(child, NULL); continue; } /* * A priority lower than SUCCESS, remember the * best matching driver. Initialise the value * of pri for the first match. */ if (best == NULL || result > pri) { best = dl; pri = result; continue; } } /* * If we have an unambiguous match in this devclass, * don't look in the parent. */ if (best && pri == 0) break; } if (best == NULL) return (ENXIO); /* * If we found a driver, change state and initialise the devclass. */ if (pri < 0) { /* Set the winning driver, devclass, and flags. */ result = device_set_driver(child, best->driver); if (result != 0) return (result); if (!child->devclass) { result = device_set_devclass(child, best->driver->name); if (result != 0) { (void)device_set_driver(child, NULL); return (result); } } resource_int_value(best->driver->name, child->unit, "flags", &child->devflags); /* * A bit bogus. Call the probe method again to make sure * that we have the right description. */ result = DEVICE_PROBE(child); if (result > 0) { if (!hasclass) (void)device_set_devclass(child, NULL); (void)device_set_driver(child, NULL); return (result); } } child->state = DS_ALIVE; bus_data_generation_update(); return (0); } /** * @brief Return the parent of a device */ device_t device_get_parent(device_t dev) { return (dev->parent); } /** * @brief Get a list of children of a device * * An array containing a list of all the children of the given device * is allocated and returned in @p *devlistp. The number of devices * in the array is returned in @p *devcountp. The caller should free * the array using @c free(p, M_TEMP). * * @param dev the device to examine * @param devlistp points at location for array pointer return * value * @param devcountp points at location for array size return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int device_get_children(device_t dev, device_t **devlistp, int *devcountp) { int count; device_t child; device_t *list; count = 0; TAILQ_FOREACH(child, &dev->children, link) { count++; } if (count == 0) { *devlistp = NULL; *devcountp = 0; return (0); } list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO); if (!list) return (ENOMEM); count = 0; TAILQ_FOREACH(child, &dev->children, link) { list[count] = child; count++; } *devlistp = list; *devcountp = count; return (0); } /** * @brief Return the current driver for the device or @c NULL if there * is no driver currently attached */ driver_t * device_get_driver(device_t dev) { return (dev->driver); } /** * @brief Return the current devclass for the device or @c NULL if * there is none. */ devclass_t device_get_devclass(device_t dev) { return (dev->devclass); } /** * @brief Return the name of the device's devclass or @c NULL if there * is none. */ const char * device_get_name(device_t dev) { if (dev != NULL && dev->devclass) return (devclass_get_name(dev->devclass)); return (NULL); } /** * @brief Return a string containing the device's devclass name * followed by an ascii representation of the device's unit number * (e.g. @c "foo2"). */ const char * device_get_nameunit(device_t dev) { return (dev->nameunit); } /** * @brief Return the device's unit number. */ int device_get_unit(device_t dev) { return (dev->unit); } /** * @brief Return the device's description string */ const char * device_get_desc(device_t dev) { return (dev->desc); } /** * @brief Return the device's flags */ uint32_t device_get_flags(device_t dev) { return (dev->devflags); } struct sysctl_ctx_list * device_get_sysctl_ctx(device_t dev) { return (&dev->sysctl_ctx); } struct sysctl_oid * device_get_sysctl_tree(device_t dev) { return (dev->sysctl_tree); } /** * @brief Print the name of the device followed by a colon and a space * * @returns the number of characters printed */ int device_print_prettyname(device_t dev) { const char *name = device_get_name(dev); if (name == NULL) return (printf("unknown: ")); return (printf("%s%d: ", name, device_get_unit(dev))); } /** * @brief Print the name of the device followed by a colon, a space * and the result of calling vprintf() with the value of @p fmt and * the following arguments. * * @returns the number of characters printed */ int device_printf(device_t dev, const char * fmt, ...) { char buf[128]; struct sbuf sb; const char *name; va_list ap; size_t retval; retval = 0; sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN); sbuf_set_drain(&sb, sbuf_printf_drain, &retval); name = device_get_name(dev); if (name == NULL) sbuf_cat(&sb, "unknown: "); else sbuf_printf(&sb, "%s%d: ", name, device_get_unit(dev)); va_start(ap, fmt); sbuf_vprintf(&sb, fmt, ap); va_end(ap); sbuf_finish(&sb); sbuf_delete(&sb); return (retval); } /** * @brief Print the name of the device followed by a colon, a space * and the result of calling log() with the value of @p fmt and * the following arguments. * * @returns the number of characters printed */ int device_log(device_t dev, int pri, const char * fmt, ...) { char buf[128]; struct sbuf sb; const char *name; va_list ap; size_t retval; retval = 0; sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN); name = device_get_name(dev); if (name == NULL) sbuf_cat(&sb, "unknown: "); else sbuf_printf(&sb, "%s%d: ", name, device_get_unit(dev)); va_start(ap, fmt); sbuf_vprintf(&sb, fmt, ap); va_end(ap); sbuf_finish(&sb); log(pri, "%.*s", (int) sbuf_len(&sb), sbuf_data(&sb)); retval = sbuf_len(&sb); sbuf_delete(&sb); return (retval); } /** * @internal */ static void device_set_desc_internal(device_t dev, const char *desc, bool allocated) { if (dev->desc && (dev->flags & DF_DESCMALLOCED)) { free(dev->desc, M_BUS); dev->flags &= ~DF_DESCMALLOCED; dev->desc = NULL; } if (allocated && desc) dev->flags |= DF_DESCMALLOCED; dev->desc = __DECONST(char *, desc); bus_data_generation_update(); } /** * @brief Set the device's description * * The value of @c desc should be a string constant that will not * change (at least until the description is changed in a subsequent * call to device_set_desc() or device_set_desc_copy()). */ void device_set_desc(device_t dev, const char *desc) { device_set_desc_internal(dev, desc, false); } /** * @brief Set the device's description * * A printf-like version of device_set_desc(). */ void device_set_descf(device_t dev, const char *fmt, ...) { va_list ap; char *buf = NULL; va_start(ap, fmt); vasprintf(&buf, M_BUS, fmt, ap); va_end(ap); device_set_desc_internal(dev, buf, true); } /** * @brief Set the device's description * * The string pointed to by @c desc is copied. Use this function if * the device description is generated, (e.g. with sprintf()). */ void device_set_desc_copy(device_t dev, const char *desc) { char *buf; buf = strdup_flags(desc, M_BUS, M_NOWAIT); device_set_desc_internal(dev, buf, true); } /** * @brief Set the device's flags */ void device_set_flags(device_t dev, uint32_t flags) { dev->devflags = flags; } /** * @brief Return the device's softc field * * The softc is allocated and zeroed when a driver is attached, based * on the size field of the driver. */ void * device_get_softc(device_t dev) { return (dev->softc); } /** * @brief Set the device's softc field * * Most drivers do not need to use this since the softc is allocated * automatically when the driver is attached. */ void device_set_softc(device_t dev, void *softc) { if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) free(dev->softc, M_BUS_SC); dev->softc = softc; if (dev->softc) dev->flags |= DF_EXTERNALSOFTC; else dev->flags &= ~DF_EXTERNALSOFTC; } /** * @brief Free claimed softc * * Most drivers do not need to use this since the softc is freed * automatically when the driver is detached. */ void device_free_softc(void *softc) { free(softc, M_BUS_SC); } /** * @brief Claim softc * * This function can be used to let the driver free the automatically * allocated softc using "device_free_softc()". This function is * useful when the driver is refcounting the softc and the softc * cannot be freed when the "device_detach" method is called. */ void device_claim_softc(device_t dev) { if (dev->softc) dev->flags |= DF_EXTERNALSOFTC; else dev->flags &= ~DF_EXTERNALSOFTC; } /** * @brief Get the device's ivars field * * The ivars field is used by the parent device to store per-device * state (e.g. the physical location of the device or a list of * resources). */ void * device_get_ivars(device_t dev) { KASSERT(dev != NULL, ("device_get_ivars(NULL, ...)")); return (dev->ivars); } /** * @brief Set the device's ivars field */ void device_set_ivars(device_t dev, void * ivars) { KASSERT(dev != NULL, ("device_set_ivars(NULL, ...)")); dev->ivars = ivars; } /** * @brief Return the device's state */ device_state_t device_get_state(device_t dev) { return (dev->state); } /** * @brief Set the DF_ENABLED flag for the device */ void device_enable(device_t dev) { dev->flags |= DF_ENABLED; } /** * @brief Clear the DF_ENABLED flag for the device */ void device_disable(device_t dev) { dev->flags &= ~DF_ENABLED; } /** * @brief Increment the busy counter for the device */ void device_busy(device_t dev) { /* * Mark the device as busy, recursively up the tree if this busy count * goes 0->1. */ if (refcount_acquire(&dev->busy) == 0 && dev->parent != NULL) device_busy(dev->parent); } /** * @brief Decrement the busy counter for the device */ void device_unbusy(device_t dev) { /* * Mark the device as unbsy, recursively if this is the last busy count. */ if (refcount_release(&dev->busy) && dev->parent != NULL) device_unbusy(dev->parent); } /** * @brief Set the DF_QUIET flag for the device */ void device_quiet(device_t dev) { dev->flags |= DF_QUIET; } /** * @brief Set the DF_QUIET_CHILDREN flag for the device */ void device_quiet_children(device_t dev) { dev->flags |= DF_QUIET_CHILDREN; } /** * @brief Clear the DF_QUIET flag for the device */ void device_verbose(device_t dev) { dev->flags &= ~DF_QUIET; } ssize_t device_get_property(device_t dev, const char *prop, void *val, size_t sz, device_property_type_t type) { device_t bus = device_get_parent(dev); switch (type) { case DEVICE_PROP_ANY: case DEVICE_PROP_BUFFER: case DEVICE_PROP_HANDLE: /* Size checks done in implementation. */ break; case DEVICE_PROP_UINT32: if (sz % 4 != 0) return (-1); break; case DEVICE_PROP_UINT64: if (sz % 8 != 0) return (-1); break; default: return (-1); } return (BUS_GET_PROPERTY(bus, dev, prop, val, sz, type)); } bool device_has_property(device_t dev, const char *prop) { return (device_get_property(dev, prop, NULL, 0, DEVICE_PROP_ANY) >= 0); } /** * @brief Return non-zero if the DF_QUIET_CHIDLREN flag is set on the device */ int device_has_quiet_children(device_t dev) { return ((dev->flags & DF_QUIET_CHILDREN) != 0); } /** * @brief Return non-zero if the DF_QUIET flag is set on the device */ int device_is_quiet(device_t dev) { return ((dev->flags & DF_QUIET) != 0); } /** * @brief Return non-zero if the DF_ENABLED flag is set on the device */ int device_is_enabled(device_t dev) { return ((dev->flags & DF_ENABLED) != 0); } /** * @brief Return non-zero if the device was successfully probed */ int device_is_alive(device_t dev) { return (dev->state >= DS_ALIVE); } /** * @brief Return non-zero if the device currently has a driver * attached to it */ int device_is_attached(device_t dev) { return (dev->state >= DS_ATTACHED); } /** * @brief Return non-zero if the device is currently suspended. */ int device_is_suspended(device_t dev) { return ((dev->flags & DF_SUSPENDED) != 0); } /** * @brief Set the devclass of a device * @see devclass_add_device(). */ int device_set_devclass(device_t dev, const char *classname) { devclass_t dc; int error; if (!classname) { if (dev->devclass) devclass_delete_device(dev->devclass, dev); return (0); } if (dev->devclass) { printf("device_set_devclass: device class already set\n"); return (EINVAL); } dc = devclass_find_internal(classname, NULL, TRUE); if (!dc) return (ENOMEM); error = devclass_add_device(dc, dev); bus_data_generation_update(); return (error); } /** * @brief Set the devclass of a device and mark the devclass fixed. * @see device_set_devclass() */ int device_set_devclass_fixed(device_t dev, const char *classname) { int error; if (classname == NULL) return (EINVAL); error = device_set_devclass(dev, classname); if (error) return (error); dev->flags |= DF_FIXEDCLASS; return (0); } /** * @brief Query the device to determine if it's of a fixed devclass * @see device_set_devclass_fixed() */ bool device_is_devclass_fixed(device_t dev) { return ((dev->flags & DF_FIXEDCLASS) != 0); } /** * @brief Set the driver of a device * * @retval 0 success * @retval EBUSY the device already has a driver attached * @retval ENOMEM a memory allocation failure occurred */ int device_set_driver(device_t dev, driver_t *driver) { int domain; struct domainset *policy; if (dev->state >= DS_ATTACHED) return (EBUSY); if (dev->driver == driver) return (0); if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) { free(dev->softc, M_BUS_SC); dev->softc = NULL; } device_set_desc(dev, NULL); kobj_delete((kobj_t) dev, NULL); dev->driver = driver; if (driver) { kobj_init((kobj_t) dev, (kobj_class_t) driver); if (!(dev->flags & DF_EXTERNALSOFTC) && driver->size > 0) { if (bus_get_domain(dev, &domain) == 0) policy = DOMAINSET_PREF(domain); else policy = DOMAINSET_RR(); dev->softc = malloc_domainset(driver->size, M_BUS_SC, policy, M_NOWAIT | M_ZERO); if (!dev->softc) { kobj_delete((kobj_t) dev, NULL); kobj_init((kobj_t) dev, &null_class); dev->driver = NULL; return (ENOMEM); } } } else { kobj_init((kobj_t) dev, &null_class); } bus_data_generation_update(); return (0); } /** * @brief Probe a device, and return this status. * * This function is the core of the device autoconfiguration * system. Its purpose is to select a suitable driver for a device and * then call that driver to initialise the hardware appropriately. The * driver is selected by calling the DEVICE_PROBE() method of a set of * candidate drivers and then choosing the driver which returned the * best value. This driver is then attached to the device using * device_attach(). * * The set of suitable drivers is taken from the list of drivers in * the parent device's devclass. If the device was originally created * with a specific class name (see device_add_child()), only drivers * with that name are probed, otherwise all drivers in the devclass * are probed. If no drivers return successful probe values in the * parent devclass, the search continues in the parent of that * devclass (see devclass_get_parent()) if any. * * @param dev the device to initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code * @retval -1 Device already attached */ int device_probe(device_t dev) { int error; bus_topo_assert(); if (dev->state >= DS_ALIVE) return (-1); if (!(dev->flags & DF_ENABLED)) { if (bootverbose && device_get_name(dev) != NULL) { device_print_prettyname(dev); printf("not probed (disabled)\n"); } return (-1); } if ((error = device_probe_child(dev->parent, dev)) != 0) { if (bus_current_pass == BUS_PASS_DEFAULT && !(dev->flags & DF_DONENOMATCH)) { device_handle_nomatch(dev); } return (error); } return (0); } /** * @brief Probe a device and attach a driver if possible * * calls device_probe() and attaches if that was successful. */ int device_probe_and_attach(device_t dev) { int error; bus_topo_assert(); error = device_probe(dev); if (error == -1) return (0); else if (error != 0) return (error); CURVNET_SET_QUIET(vnet0); error = device_attach(dev); CURVNET_RESTORE(); return error; } /** * @brief Attach a device driver to a device * * This function is a wrapper around the DEVICE_ATTACH() driver * method. In addition to calling DEVICE_ATTACH(), it initialises the * device's sysctl tree, optionally prints a description of the device * and queues a notification event for user-based device management * services. * * Normally this function is only called internally from * device_probe_and_attach(). * * @param dev the device to initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_attach(device_t dev) { uint64_t attachtime; uint16_t attachentropy; int error; if (resource_disabled(dev->driver->name, dev->unit)) { device_disable(dev); if (bootverbose) device_printf(dev, "disabled via hints entry\n"); return (ENXIO); } device_sysctl_init(dev); if (!device_is_quiet(dev)) device_print_child(dev->parent, dev); attachtime = get_cyclecount(); dev->state = DS_ATTACHING; if ((error = DEVICE_ATTACH(dev)) != 0) { printf("device_attach: %s%d attach returned %d\n", dev->driver->name, dev->unit, error); if (disable_failed_devs) { /* * When the user has asked to disable failed devices, we * directly disable the device, but leave it in the * attaching state. It will not try to probe/attach the * device further. This leaves the device numbering * intact for other similar devices in the system. It * can be removed from this state with devctl. */ device_disable(dev); } else { /* * Otherwise, when attach fails, tear down the state * around that so we can retry when, for example, new * drivers are loaded. */ if (!(dev->flags & DF_FIXEDCLASS)) devclass_delete_device(dev->devclass, dev); (void)device_set_driver(dev, NULL); device_sysctl_fini(dev); KASSERT(dev->busy == 0, ("attach failed but busy")); dev->state = DS_NOTPRESENT; } return (error); } dev->flags |= DF_ATTACHED_ONCE; /* * We only need the low bits of this time, but ranges from tens to thousands * have been seen, so keep 2 bytes' worth. */ attachentropy = (uint16_t)(get_cyclecount() - attachtime); random_harvest_direct(&attachentropy, sizeof(attachentropy), RANDOM_ATTACH); device_sysctl_update(dev); dev->state = DS_ATTACHED; dev->flags &= ~DF_DONENOMATCH; EVENTHANDLER_DIRECT_INVOKE(device_attach, dev); return (0); } /** * @brief Detach a driver from a device * * This function is a wrapper around the DEVICE_DETACH() driver * method. If the call to DEVICE_DETACH() succeeds, it calls * BUS_CHILD_DETACHED() for the parent of @p dev, queues a * notification event for user-based device management services and * cleans up the device's sysctl tree. * * @param dev the device to un-initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_detach(device_t dev) { int error; bus_topo_assert(); PDEBUG(("%s", DEVICENAME(dev))); if (dev->busy > 0) return (EBUSY); if (dev->state == DS_ATTACHING) { device_printf(dev, "device in attaching state! Deferring detach.\n"); return (EBUSY); } if (dev->state != DS_ATTACHED) return (0); EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_BEGIN); if ((error = DEVICE_DETACH(dev)) != 0) { EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_FAILED); return (error); } else { EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_COMPLETE); } if (!device_is_quiet(dev)) device_printf(dev, "detached\n"); if (dev->parent) BUS_CHILD_DETACHED(dev->parent, dev); if (!(dev->flags & DF_FIXEDCLASS)) devclass_delete_device(dev->devclass, dev); device_verbose(dev); dev->state = DS_NOTPRESENT; (void)device_set_driver(dev, NULL); device_sysctl_fini(dev); return (0); } /** * @brief Tells a driver to quiesce itself. * * This function is a wrapper around the DEVICE_QUIESCE() driver * method. If the call to DEVICE_QUIESCE() succeeds. * * @param dev the device to quiesce * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_quiesce(device_t dev) { PDEBUG(("%s", DEVICENAME(dev))); if (dev->busy > 0) return (EBUSY); if (dev->state != DS_ATTACHED) return (0); return (DEVICE_QUIESCE(dev)); } /** * @brief Notify a device of system shutdown * * This function calls the DEVICE_SHUTDOWN() driver method if the * device currently has an attached driver. * * @returns the value returned by DEVICE_SHUTDOWN() */ int device_shutdown(device_t dev) { if (dev->state < DS_ATTACHED) return (0); return (DEVICE_SHUTDOWN(dev)); } /** * @brief Set the unit number of a device * * This function can be used to override the unit number used for a * device (e.g. to wire a device to a pre-configured unit number). */ int device_set_unit(device_t dev, int unit) { devclass_t dc; int err; if (unit == dev->unit) return (0); dc = device_get_devclass(dev); if (unit < dc->maxunit && dc->devices[unit]) return (EBUSY); err = devclass_delete_device(dc, dev); if (err) return (err); dev->unit = unit; err = devclass_add_device(dc, dev); if (err) return (err); bus_data_generation_update(); return (0); } /*======================================*/ /* * Some useful method implementations to make life easier for bus drivers. */ /** * @brief Initialize a resource mapping request * * This is the internal implementation of the public API * resource_init_map_request. Callers may be using a different layout * of struct resource_map_request than the kernel, so callers pass in * the size of the structure they are using to identify the structure * layout. */ void resource_init_map_request_impl(struct resource_map_request *args, size_t sz) { bzero(args, sz); args->size = sz; args->memattr = VM_MEMATTR_DEVICE; } /** * @brief Validate a resource mapping request * * Translate a device driver's mapping request (@p in) to a struct * resource_map_request using the current structure layout (@p out). * In addition, validate the offset and length from the mapping * request against the bounds of the resource @p r. If the offset or * length are invalid, fail with EINVAL. If the offset and length are * valid, the absolute starting address of the requested mapping is * returned in @p startp and the length of the requested mapping is * returned in @p lengthp. */ int resource_validate_map_request(struct resource *r, struct resource_map_request *in, struct resource_map_request *out, rman_res_t *startp, rman_res_t *lengthp) { rman_res_t end, length, start; /* * This assumes that any callers of this function are compiled * into the kernel and use the same version of the structure * as this file. */ MPASS(out->size == sizeof(struct resource_map_request)); if (in != NULL) bcopy(in, out, imin(in->size, out->size)); start = rman_get_start(r) + out->offset; if (out->length == 0) length = rman_get_size(r); else length = out->length; end = start + length - 1; if (start > rman_get_end(r) || start < rman_get_start(r)) return (EINVAL); if (end > rman_get_end(r) || end < start) return (EINVAL); *lengthp = length; *startp = start; return (0); } /** * @brief Initialise a resource list. * * @param rl the resource list to initialise */ void resource_list_init(struct resource_list *rl) { STAILQ_INIT(rl); } /** * @brief Reclaim memory used by a resource list. * * This function frees the memory for all resource entries on the list * (if any). * * @param rl the resource list to free */ void resource_list_free(struct resource_list *rl) { struct resource_list_entry *rle; while ((rle = STAILQ_FIRST(rl)) != NULL) { if (rle->res) panic("resource_list_free: resource entry is busy"); STAILQ_REMOVE_HEAD(rl, link); free(rle, M_BUS); } } /** * @brief Add a resource entry. * * This function adds a resource entry using the given @p type, @p * start, @p end and @p count values. A rid value is chosen by * searching sequentially for the first unused rid starting at zero. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param start the start address of the resource * @param end the end address of the resource * @param count XXX end-start+1 */ int resource_list_add_next(struct resource_list *rl, int type, rman_res_t start, rman_res_t end, rman_res_t count) { int rid; rid = 0; while (resource_list_find(rl, type, rid) != NULL) rid++; resource_list_add(rl, type, rid, start, end, count); return (rid); } /** * @brief Add or modify a resource entry. * * If an existing entry exists with the same type and rid, it will be * modified using the given values of @p start, @p end and @p * count. If no entry exists, a new one will be created using the * given values. The resource list entry that matches is then returned. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * @param start the start address of the resource * @param end the end address of the resource * @param count XXX end-start+1 */ struct resource_list_entry * resource_list_add(struct resource_list *rl, int type, int rid, rman_res_t start, rman_res_t end, rman_res_t count) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (!rle) { rle = malloc(sizeof(struct resource_list_entry), M_BUS, M_NOWAIT); if (!rle) panic("resource_list_add: can't record entry"); STAILQ_INSERT_TAIL(rl, rle, link); rle->type = type; rle->rid = rid; rle->res = NULL; rle->flags = 0; } if (rle->res) panic("resource_list_add: resource entry is busy"); rle->start = start; rle->end = end; rle->count = count; return (rle); } /** * @brief Determine if a resource entry is busy. * * Returns true if a resource entry is busy meaning that it has an * associated resource that is not an unallocated "reserved" resource. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns Non-zero if the entry is busy, zero otherwise. */ int resource_list_busy(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (rle == NULL || rle->res == NULL) return (0); if ((rle->flags & (RLE_RESERVED | RLE_ALLOCATED)) == RLE_RESERVED) { KASSERT(!(rman_get_flags(rle->res) & RF_ACTIVE), ("reserved resource is active")); return (0); } return (1); } /** * @brief Determine if a resource entry is reserved. * * Returns true if a resource entry is reserved meaning that it has an * associated "reserved" resource. The resource can either be * allocated or unallocated. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns Non-zero if the entry is reserved, zero otherwise. */ int resource_list_reserved(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (rle != NULL && rle->flags & RLE_RESERVED) return (1); return (0); } /** * @brief Find a resource entry by type and rid. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns the resource entry pointer or NULL if there is no such * entry. */ struct resource_list_entry * resource_list_find(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; STAILQ_FOREACH(rle, rl, link) { if (rle->type == type && rle->rid == rid) return (rle); } return (NULL); } /** * @brief Delete a resource entry. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier */ void resource_list_delete(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle = resource_list_find(rl, type, rid); if (rle) { if (rle->res != NULL) panic("resource_list_delete: resource has not been released"); STAILQ_REMOVE(rl, rle, resource_list_entry, link); free(rle, M_BUS); } } /** * @brief Allocate a reserved resource * * This can be used by buses to force the allocation of resources * that are always active in the system even if they are not allocated * by a driver (e.g. PCI BARs). This function is usually called when * adding a new child to the bus. The resource is allocated from the * parent bus when it is reserved. The resource list entry is marked * with RLE_RESERVED to note that it is a reserved resource. * * Subsequent attempts to allocate the resource with * resource_list_alloc() will succeed the first time and will set * RLE_ALLOCATED to note that it has been allocated. When a reserved * resource that has been allocated is released with * resource_list_release() the resource RLE_ALLOCATED is cleared, but * the actual resource remains allocated. The resource can be released to * the parent bus by calling resource_list_unreserve(). * * @param rl the resource list to allocate from * @param bus the parent device of @p child * @param child the device for which the resource is being reserved * @param type the type of resource to allocate * @param rid a pointer to the resource identifier * @param start hint at the start of the resource range - pass * @c 0 for any start address * @param end hint at the end of the resource range - pass * @c ~0 for any end address * @param count hint at the size of range required - pass @c 1 * for any size * @param flags any extra flags to control the resource * allocation - see @c RF_XXX flags in * for details * * @returns the resource which was allocated or @c NULL if no * resource could be allocated */ struct resource * resource_list_reserve(struct resource_list *rl, device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); struct resource *r; if (passthrough) panic( "resource_list_reserve() should only be called for direct children"); if (flags & RF_ACTIVE) panic( "resource_list_reserve() should only reserve inactive resources"); r = resource_list_alloc(rl, bus, child, type, rid, start, end, count, flags); if (r != NULL) { rle = resource_list_find(rl, type, *rid); rle->flags |= RLE_RESERVED; } return (r); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE() * * Implement BUS_ALLOC_RESOURCE() by looking up a resource from the list * and passing the allocation up to the parent of @p bus. This assumes * that the first entry of @c device_get_ivars(child) is a struct * resource_list. This also handles 'passthrough' allocations where a * child is a remote descendant of bus by passing the allocation up to * the parent of bus. * * Typically, a bus driver would store a list of child resources * somewhere in the child device's ivars (see device_get_ivars()) and * its implementation of BUS_ALLOC_RESOURCE() would find that list and * then call resource_list_alloc() to perform the allocation. * * @param rl the resource list to allocate from * @param bus the parent device of @p child * @param child the device which is requesting an allocation * @param type the type of resource to allocate * @param rid a pointer to the resource identifier * @param start hint at the start of the resource range - pass * @c 0 for any start address * @param end hint at the end of the resource range - pass * @c ~0 for any end address * @param count hint at the size of range required - pass @c 1 * for any size * @param flags any extra flags to control the resource * allocation - see @c RF_XXX flags in * for details * * @returns the resource which was allocated or @c NULL if no * resource could be allocated */ struct resource * resource_list_alloc(struct resource_list *rl, device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); int isdefault = RMAN_IS_DEFAULT_RANGE(start, end); if (passthrough) { return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, start, end, count, flags)); } rle = resource_list_find(rl, type, *rid); if (!rle) return (NULL); /* no resource of that type/rid */ if (rle->res) { if (rle->flags & RLE_RESERVED) { if (rle->flags & RLE_ALLOCATED) return (NULL); if ((flags & RF_ACTIVE) && bus_activate_resource(child, type, *rid, rle->res) != 0) return (NULL); rle->flags |= RLE_ALLOCATED; return (rle->res); } device_printf(bus, "resource entry %#x type %d for child %s is busy\n", *rid, type, device_get_nameunit(child)); return (NULL); } if (isdefault) { start = rle->start; count = ulmax(count, rle->count); end = ulmax(rle->end, start + count - 1); } rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, start, end, count, flags); /* * Record the new range. */ if (rle->res) { rle->start = rman_get_start(rle->res); rle->end = rman_get_end(rle->res); rle->count = count; } return (rle->res); } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE() * * Implement BUS_RELEASE_RESOURCE() using a resource list. Normally * used with resource_list_alloc(). * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device which is requesting a release * @param type the type of resource to release * @param rid the resource identifier * @param res the resource to release * * @retval 0 success * @retval non-zero a standard unix error code indicating what * error condition prevented the operation */ int resource_list_release(struct resource_list *rl, device_t bus, device_t child, int type, int rid, struct resource *res) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); int error; if (passthrough) { return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child, type, rid, res)); } rle = resource_list_find(rl, type, rid); if (!rle) panic("resource_list_release: can't find resource"); if (!rle->res) panic("resource_list_release: resource entry is not busy"); if (rle->flags & RLE_RESERVED) { if (rle->flags & RLE_ALLOCATED) { if (rman_get_flags(res) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, res); if (error) return (error); } rle->flags &= ~RLE_ALLOCATED; return (0); } return (EINVAL); } error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child, type, rid, res); if (error) return (error); rle->res = NULL; return (0); } /** * @brief Release all active resources of a given type * * Release all active resources of a specified type. This is intended * to be used to cleanup resources leaked by a driver after detach or * a failed attach. * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device whose active resources are being released * @param type the type of resources to release * * @retval 0 success * @retval EBUSY at least one resource was active */ int resource_list_release_active(struct resource_list *rl, device_t bus, device_t child, int type) { struct resource_list_entry *rle; int error, retval; retval = 0; STAILQ_FOREACH(rle, rl, link) { if (rle->type != type) continue; if (rle->res == NULL) continue; if ((rle->flags & (RLE_RESERVED | RLE_ALLOCATED)) == RLE_RESERVED) continue; retval = EBUSY; error = resource_list_release(rl, bus, child, type, rman_get_rid(rle->res), rle->res); if (error != 0) device_printf(bus, "Failed to release active resource: %d\n", error); } return (retval); } /** * @brief Fully release a reserved resource * * Fully releases a resource reserved via resource_list_reserve(). * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device whose reserved resource is being released * @param type the type of resource to release * @param rid the resource identifier * @param res the resource to release * * @retval 0 success * @retval non-zero a standard unix error code indicating what * error condition prevented the operation */ int resource_list_unreserve(struct resource_list *rl, device_t bus, device_t child, int type, int rid) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); if (passthrough) panic( "resource_list_unreserve() should only be called for direct children"); rle = resource_list_find(rl, type, rid); if (!rle) panic("resource_list_unreserve: can't find resource"); if (!(rle->flags & RLE_RESERVED)) return (EINVAL); if (rle->flags & RLE_ALLOCATED) return (EBUSY); rle->flags &= ~RLE_RESERVED; return (resource_list_release(rl, bus, child, type, rid, rle->res)); } /** * @brief Print a description of resources in a resource list * * Print all resources of a specified type, for use in BUS_PRINT_CHILD(). * The name is printed if at least one resource of the given type is available. * The format is used to print resource start and end. * * @param rl the resource list to print * @param name the name of @p type, e.g. @c "memory" * @param type type type of resource entry to print * @param format printf(9) format string to print resource * start and end values * * @returns the number of characters printed */ int resource_list_print_type(struct resource_list *rl, const char *name, int type, const char *format) { struct resource_list_entry *rle; int printed, retval; printed = 0; retval = 0; /* Yes, this is kinda cheating */ STAILQ_FOREACH(rle, rl, link) { if (rle->type == type) { if (printed == 0) retval += printf(" %s ", name); else retval += printf(","); printed++; retval += printf(format, rle->start); if (rle->count > 1) { retval += printf("-"); retval += printf(format, rle->start + rle->count - 1); } } } return (retval); } /** * @brief Releases all the resources in a list. * * @param rl The resource list to purge. * * @returns nothing */ void resource_list_purge(struct resource_list *rl) { struct resource_list_entry *rle; while ((rle = STAILQ_FIRST(rl)) != NULL) { if (rle->res) bus_release_resource(rman_get_device(rle->res), rle->type, rle->rid, rle->res); STAILQ_REMOVE_HEAD(rl, link); free(rle, M_BUS); } } device_t bus_generic_add_child(device_t dev, u_int order, const char *name, int unit) { return (device_add_child_ordered(dev, order, name, unit)); } /** * @brief Helper function for implementing DEVICE_PROBE() * * This function can be used to help implement the DEVICE_PROBE() for * a bus (i.e. a device which has other devices attached to it). It * calls the DEVICE_IDENTIFY() method of each driver in the device's * devclass. */ int bus_generic_probe(device_t dev) { devclass_t dc = dev->devclass; driverlink_t dl; TAILQ_FOREACH(dl, &dc->drivers, link) { /* * If this driver's pass is too high, then ignore it. * For most drivers in the default pass, this will * never be true. For early-pass drivers they will * only call the identify routines of eligible drivers * when this routine is called. Drivers for later * passes should have their identify routines called * on early-pass buses during BUS_NEW_PASS(). */ if (dl->pass > bus_current_pass) continue; DEVICE_IDENTIFY(dl->driver, dev); } return (0); } /** * @brief Helper function for implementing DEVICE_ATTACH() * * This function can be used to help implement the DEVICE_ATTACH() for * a bus. It calls device_probe_and_attach() for each of the device's * children. */ int bus_generic_attach(device_t dev) { device_t child; TAILQ_FOREACH(child, &dev->children, link) { device_probe_and_attach(child); } return (0); } /** * @brief Helper function for delaying attaching children * * Many buses can't run transactions on the bus which children need to probe and * attach until after interrupts and/or timers are running. This function * delays their attach until interrupts and timers are enabled. */ int bus_delayed_attach_children(device_t dev) { /* Probe and attach the bus children when interrupts are available */ config_intrhook_oneshot((ich_func_t)bus_generic_attach, dev); return (0); } /** * @brief Helper function for implementing DEVICE_DETACH() * * This function can be used to help implement the DEVICE_DETACH() for * a bus. It calls device_detach() for each of the device's * children. */ int bus_generic_detach(device_t dev) { device_t child; int error; if (dev->state != DS_ATTACHED) return (EBUSY); /* * Detach children in the reverse order. * See bus_generic_suspend for details. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { if ((error = device_detach(child)) != 0) return (error); } return (0); } /** * @brief Helper function for implementing DEVICE_SHUTDOWN() * * This function can be used to help implement the DEVICE_SHUTDOWN() * for a bus. It calls device_shutdown() for each of the device's * children. */ int bus_generic_shutdown(device_t dev) { device_t child; /* * Shut down children in the reverse order. * See bus_generic_suspend for details. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { device_shutdown(child); } return (0); } /** * @brief Default function for suspending a child device. * * This function is to be used by a bus's DEVICE_SUSPEND_CHILD(). */ int bus_generic_suspend_child(device_t dev, device_t child) { int error; error = DEVICE_SUSPEND(child); if (error == 0) { child->flags |= DF_SUSPENDED; } else { printf("DEVICE_SUSPEND(%s) failed: %d\n", device_get_nameunit(child), error); } return (error); } /** * @brief Default function for resuming a child device. * * This function is to be used by a bus's DEVICE_RESUME_CHILD(). */ int bus_generic_resume_child(device_t dev, device_t child) { DEVICE_RESUME(child); child->flags &= ~DF_SUSPENDED; return (0); } /** * @brief Helper function for implementing DEVICE_SUSPEND() * * This function can be used to help implement the DEVICE_SUSPEND() * for a bus. It calls DEVICE_SUSPEND() for each of the device's * children. If any call to DEVICE_SUSPEND() fails, the suspend * operation is aborted and any devices which were suspended are * resumed immediately by calling their DEVICE_RESUME() methods. */ int bus_generic_suspend(device_t dev) { int error; device_t child; /* * Suspend children in the reverse order. * For most buses all children are equal, so the order does not matter. * Other buses, such as acpi, carefully order their child devices to * express implicit dependencies between them. For such buses it is * safer to bring down devices in the reverse order. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { error = BUS_SUSPEND_CHILD(dev, child); if (error != 0) { child = TAILQ_NEXT(child, link); if (child != NULL) { TAILQ_FOREACH_FROM(child, &dev->children, link) BUS_RESUME_CHILD(dev, child); } return (error); } } return (0); } /** * @brief Helper function for implementing DEVICE_RESUME() * * This function can be used to help implement the DEVICE_RESUME() for * a bus. It calls DEVICE_RESUME() on each of the device's children. */ int bus_generic_resume(device_t dev) { device_t child; TAILQ_FOREACH(child, &dev->children, link) { BUS_RESUME_CHILD(dev, child); /* if resume fails, there's nothing we can usefully do... */ } return (0); } /** * @brief Helper function for implementing BUS_RESET_POST * * Bus can use this function to implement common operations of * re-attaching or resuming the children after the bus itself was * reset, and after restoring bus-unique state of children. * * @param dev The bus * #param flags DEVF_RESET_* */ int bus_helper_reset_post(device_t dev, int flags) { device_t child; int error, error1; error = 0; TAILQ_FOREACH(child, &dev->children,link) { BUS_RESET_POST(dev, child); error1 = (flags & DEVF_RESET_DETACH) != 0 ? device_probe_and_attach(child) : BUS_RESUME_CHILD(dev, child); if (error == 0 && error1 != 0) error = error1; } return (error); } static void bus_helper_reset_prepare_rollback(device_t dev, device_t child, int flags) { child = TAILQ_NEXT(child, link); if (child == NULL) return; TAILQ_FOREACH_FROM(child, &dev->children,link) { BUS_RESET_POST(dev, child); if ((flags & DEVF_RESET_DETACH) != 0) device_probe_and_attach(child); else BUS_RESUME_CHILD(dev, child); } } /** * @brief Helper function for implementing BUS_RESET_PREPARE * * Bus can use this function to implement common operations of * detaching or suspending the children before the bus itself is * reset, and then save bus-unique state of children that must * persists around reset. * * @param dev The bus * #param flags DEVF_RESET_* */ int bus_helper_reset_prepare(device_t dev, int flags) { device_t child; int error; if (dev->state != DS_ATTACHED) return (EBUSY); TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { if ((flags & DEVF_RESET_DETACH) != 0) { error = device_get_state(child) == DS_ATTACHED ? device_detach(child) : 0; } else { error = BUS_SUSPEND_CHILD(dev, child); } if (error == 0) { error = BUS_RESET_PREPARE(dev, child); if (error != 0) { if ((flags & DEVF_RESET_DETACH) != 0) device_probe_and_attach(child); else BUS_RESUME_CHILD(dev, child); } } if (error != 0) { bus_helper_reset_prepare_rollback(dev, child, flags); return (error); } } return (0); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints the first part of the ascii representation of * @p child, including its name, unit and description (if any - see * device_set_desc()). * * @returns the number of characters printed */ int bus_print_child_header(device_t dev, device_t child) { int retval = 0; if (device_get_desc(child)) { retval += device_printf(child, "<%s>", device_get_desc(child)); } else { retval += printf("%s", device_get_nameunit(child)); } return (retval); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints the last part of the ascii representation of * @p child, which consists of the string @c " on " followed by the * name and unit of the @p dev. * * @returns the number of characters printed */ int bus_print_child_footer(device_t dev, device_t child) { return (printf(" on %s\n", device_get_nameunit(dev))); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints out the VM domain for the given device. * * @returns the number of characters printed */ int bus_print_child_domain(device_t dev, device_t child) { int domain; /* No domain? Don't print anything */ if (BUS_GET_DOMAIN(dev, child, &domain) != 0) return (0); return (printf(" numa-domain %d", domain)); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function simply calls bus_print_child_header() followed by * bus_print_child_footer(). * * @returns the number of characters printed */ int bus_generic_print_child(device_t dev, device_t child) { int retval = 0; retval += bus_print_child_header(dev, child); retval += bus_print_child_domain(dev, child); retval += bus_print_child_footer(dev, child); return (retval); } /** * @brief Stub function for implementing BUS_READ_IVAR(). * * @returns ENOENT */ int bus_generic_read_ivar(device_t dev, device_t child, int index, uintptr_t * result) { return (ENOENT); } /** * @brief Stub function for implementing BUS_WRITE_IVAR(). * * @returns ENOENT */ int bus_generic_write_ivar(device_t dev, device_t child, int index, uintptr_t value) { return (ENOENT); } /** * @brief Helper function for implementing BUS_GET_PROPERTY(). * * This simply calls the BUS_GET_PROPERTY of the parent of dev, * until a non-default implementation is found. */ ssize_t bus_generic_get_property(device_t dev, device_t child, const char *propname, void *propvalue, size_t size, device_property_type_t type) { if (device_get_parent(dev) != NULL) return (BUS_GET_PROPERTY(device_get_parent(dev), child, propname, propvalue, size, type)); return (-1); } /** * @brief Stub function for implementing BUS_GET_RESOURCE_LIST(). * * @returns NULL */ struct resource_list * bus_generic_get_resource_list(device_t dev, device_t child) { return (NULL); } /** * @brief Helper function for implementing BUS_DRIVER_ADDED(). * * This implementation of BUS_DRIVER_ADDED() simply calls the driver's * DEVICE_IDENTIFY() method to allow it to add new children to the bus * and then calls device_probe_and_attach() for each unattached child. */ void bus_generic_driver_added(device_t dev, driver_t *driver) { device_t child; DEVICE_IDENTIFY(driver, dev); TAILQ_FOREACH(child, &dev->children, link) { if (child->state == DS_NOTPRESENT) device_probe_and_attach(child); } } /** * @brief Helper function for implementing BUS_NEW_PASS(). * * This implementing of BUS_NEW_PASS() first calls the identify * routines for any drivers that probe at the current pass. Then it * walks the list of devices for this bus. If a device is already * attached, then it calls BUS_NEW_PASS() on that device. If the * device is not already attached, it attempts to attach a driver to * it. */ void bus_generic_new_pass(device_t dev) { driverlink_t dl; devclass_t dc; device_t child; dc = dev->devclass; TAILQ_FOREACH(dl, &dc->drivers, link) { if (dl->pass == bus_current_pass) DEVICE_IDENTIFY(dl->driver, dev); } TAILQ_FOREACH(child, &dev->children, link) { if (child->state >= DS_ATTACHED) BUS_NEW_PASS(child); else if (child->state == DS_NOTPRESENT) device_probe_and_attach(child); } } /** * @brief Helper function for implementing BUS_SETUP_INTR(). * * This simple implementation of BUS_SETUP_INTR() simply calls the * BUS_SETUP_INTR() method of the parent of @p dev. */ int bus_generic_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filter, driver_intr_t *intr, void *arg, void **cookiep) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_SETUP_INTR(dev->parent, child, irq, flags, filter, intr, arg, cookiep)); return (EINVAL); } /** * @brief Helper function for implementing BUS_TEARDOWN_INTR(). * * This simple implementation of BUS_TEARDOWN_INTR() simply calls the * BUS_TEARDOWN_INTR() method of the parent of @p dev. */ int bus_generic_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_TEARDOWN_INTR(dev->parent, child, irq, cookie)); return (EINVAL); } /** * @brief Helper function for implementing BUS_SUSPEND_INTR(). * * This simple implementation of BUS_SUSPEND_INTR() simply calls the * BUS_SUSPEND_INTR() method of the parent of @p dev. */ int bus_generic_suspend_intr(device_t dev, device_t child, struct resource *irq) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_SUSPEND_INTR(dev->parent, child, irq)); return (EINVAL); } /** * @brief Helper function for implementing BUS_RESUME_INTR(). * * This simple implementation of BUS_RESUME_INTR() simply calls the * BUS_RESUME_INTR() method of the parent of @p dev. */ int bus_generic_resume_intr(device_t dev, device_t child, struct resource *irq) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_RESUME_INTR(dev->parent, child, irq)); return (EINVAL); } /** * @brief Helper function for implementing BUS_ADJUST_RESOURCE(). * * This simple implementation of BUS_ADJUST_RESOURCE() simply calls the * BUS_ADJUST_RESOURCE() method of the parent of @p dev. */ int bus_generic_adjust_resource(device_t dev, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ADJUST_RESOURCE(dev->parent, child, type, r, start, end)); return (EINVAL); } /* * @brief Helper function for implementing BUS_TRANSLATE_RESOURCE(). * * This simple implementation of BUS_TRANSLATE_RESOURCE() simply calls the * BUS_TRANSLATE_RESOURCE() method of the parent of @p dev. If there is no * parent, no translation happens. */ int bus_generic_translate_resource(device_t dev, int type, rman_res_t start, rman_res_t *newstart) { if (dev->parent) return (BUS_TRANSLATE_RESOURCE(dev->parent, type, start, newstart)); *newstart = start; return (0); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE(). * * This simple implementation of BUS_ALLOC_RESOURCE() simply calls the * BUS_ALLOC_RESOURCE() method of the parent of @p dev. */ struct resource * bus_generic_alloc_resource(device_t dev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ALLOC_RESOURCE(dev->parent, child, type, rid, start, end, count, flags)); return (NULL); } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE(). * * This simple implementation of BUS_RELEASE_RESOURCE() simply calls the * BUS_RELEASE_RESOURCE() method of the parent of @p dev. */ int bus_generic_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_RELEASE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_ACTIVATE_RESOURCE(). * * This simple implementation of BUS_ACTIVATE_RESOURCE() simply calls the * BUS_ACTIVATE_RESOURCE() method of the parent of @p dev. */ int bus_generic_activate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ACTIVATE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_DEACTIVATE_RESOURCE(). * * This simple implementation of BUS_DEACTIVATE_RESOURCE() simply calls the * BUS_DEACTIVATE_RESOURCE() method of the parent of @p dev. */ int bus_generic_deactivate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_DEACTIVATE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_MAP_RESOURCE(). * * This simple implementation of BUS_MAP_RESOURCE() simply calls the * BUS_MAP_RESOURCE() method of the parent of @p dev. */ int bus_generic_map_resource(device_t dev, device_t child, int type, struct resource *r, struct resource_map_request *args, struct resource_map *map) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_MAP_RESOURCE(dev->parent, child, type, r, args, map)); return (EINVAL); } /** * @brief Helper function for implementing BUS_UNMAP_RESOURCE(). * * This simple implementation of BUS_UNMAP_RESOURCE() simply calls the * BUS_UNMAP_RESOURCE() method of the parent of @p dev. */ int bus_generic_unmap_resource(device_t dev, device_t child, int type, struct resource *r, struct resource_map *map) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_UNMAP_RESOURCE(dev->parent, child, type, r, map)); return (EINVAL); } /** * @brief Helper function for implementing BUS_BIND_INTR(). * * This simple implementation of BUS_BIND_INTR() simply calls the * BUS_BIND_INTR() method of the parent of @p dev. */ int bus_generic_bind_intr(device_t dev, device_t child, struct resource *irq, int cpu) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_BIND_INTR(dev->parent, child, irq, cpu)); return (EINVAL); } /** * @brief Helper function for implementing BUS_CONFIG_INTR(). * * This simple implementation of BUS_CONFIG_INTR() simply calls the * BUS_CONFIG_INTR() method of the parent of @p dev. */ int bus_generic_config_intr(device_t dev, int irq, enum intr_trigger trig, enum intr_polarity pol) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_CONFIG_INTR(dev->parent, irq, trig, pol)); return (EINVAL); } /** * @brief Helper function for implementing BUS_DESCRIBE_INTR(). * * This simple implementation of BUS_DESCRIBE_INTR() simply calls the * BUS_DESCRIBE_INTR() method of the parent of @p dev. */ int bus_generic_describe_intr(device_t dev, device_t child, struct resource *irq, void *cookie, const char *descr) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_DESCRIBE_INTR(dev->parent, child, irq, cookie, descr)); return (EINVAL); } /** * @brief Helper function for implementing BUS_GET_CPUS(). * * This simple implementation of BUS_GET_CPUS() simply calls the * BUS_GET_CPUS() method of the parent of @p dev. */ int bus_generic_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_CPUS(dev->parent, child, op, setsize, cpuset)); return (EINVAL); } /** * @brief Helper function for implementing BUS_GET_DMA_TAG(). * * This simple implementation of BUS_GET_DMA_TAG() simply calls the * BUS_GET_DMA_TAG() method of the parent of @p dev. */ bus_dma_tag_t bus_generic_get_dma_tag(device_t dev, device_t child) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_DMA_TAG(dev->parent, child)); return (NULL); } /** * @brief Helper function for implementing BUS_GET_BUS_TAG(). * * This simple implementation of BUS_GET_BUS_TAG() simply calls the * BUS_GET_BUS_TAG() method of the parent of @p dev. */ bus_space_tag_t bus_generic_get_bus_tag(device_t dev, device_t child) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_BUS_TAG(dev->parent, child)); return ((bus_space_tag_t)0); } /** * @brief Helper function for implementing BUS_GET_RESOURCE(). * * This implementation of BUS_GET_RESOURCE() uses the * resource_list_find() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * search. */ int bus_generic_rl_get_resource(device_t dev, device_t child, int type, int rid, rman_res_t *startp, rman_res_t *countp) { struct resource_list * rl = NULL; struct resource_list_entry * rle = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); rle = resource_list_find(rl, type, rid); if (!rle) return (ENOENT); if (startp) *startp = rle->start; if (countp) *countp = rle->count; return (0); } /** * @brief Helper function for implementing BUS_SET_RESOURCE(). * * This implementation of BUS_SET_RESOURCE() uses the * resource_list_add() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * edit. */ int bus_generic_rl_set_resource(device_t dev, device_t child, int type, int rid, rman_res_t start, rman_res_t count) { struct resource_list * rl = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); resource_list_add(rl, type, rid, start, (start + count - 1), count); return (0); } /** * @brief Helper function for implementing BUS_DELETE_RESOURCE(). * * This implementation of BUS_DELETE_RESOURCE() uses the * resource_list_delete() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * edit. */ void bus_generic_rl_delete_resource(device_t dev, device_t child, int type, int rid) { struct resource_list * rl = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return; resource_list_delete(rl, type, rid); return; } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE(). * * This implementation of BUS_RELEASE_RESOURCE() uses the * resource_list_release() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list. */ int bus_generic_rl_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct resource_list * rl = NULL; if (device_get_parent(child) != dev) return (BUS_RELEASE_RESOURCE(device_get_parent(dev), child, type, rid, r)); rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); return (resource_list_release(rl, dev, child, type, rid, r)); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE(). * * This implementation of BUS_ALLOC_RESOURCE() uses the * resource_list_alloc() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list. */ struct resource * bus_generic_rl_alloc_resource(device_t dev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list * rl = NULL; if (device_get_parent(child) != dev) return (BUS_ALLOC_RESOURCE(device_get_parent(dev), child, type, rid, start, end, count, flags)); rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (NULL); return (resource_list_alloc(rl, dev, child, type, rid, start, end, count, flags)); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE(). * * This implementation of BUS_ALLOC_RESOURCE() allocates a * resource from a resource manager. It uses BUS_GET_RMAN() * to obtain the resource manager. */ struct resource * bus_generic_rman_alloc_resource(device_t dev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource *r; struct rman *rm; rm = BUS_GET_RMAN(dev, type, flags); if (rm == NULL) return (NULL); r = rman_reserve_resource(rm, start, end, count, flags & ~RF_ACTIVE, child); if (r == NULL) return (NULL); rman_set_rid(r, *rid); if (flags & RF_ACTIVE) { if (bus_activate_resource(child, type, *rid, r) != 0) { rman_release_resource(r); return (NULL); } } return (r); } /** * @brief Helper function for implementing BUS_ADJUST_RESOURCE(). * * This implementation of BUS_ADJUST_RESOURCE() adjusts resources only * if they were allocated from the resource manager returned by * BUS_GET_RMAN(). */ int bus_generic_rman_adjust_resource(device_t dev, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end) { struct rman *rm; rm = BUS_GET_RMAN(dev, type, rman_get_flags(r)); if (rm == NULL) return (ENXIO); if (!rman_is_region_manager(r, rm)) return (EINVAL); return (rman_adjust_resource(r, start, end)); } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE(). * * This implementation of BUS_RELEASE_RESOURCE() releases resources * allocated by bus_generic_rman_alloc_resource. */ int bus_generic_rman_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { #ifdef INVARIANTS struct rman *rm; #endif int error; #ifdef INVARIANTS rm = BUS_GET_RMAN(dev, type, rman_get_flags(r)); KASSERT(rman_is_region_manager(r, rm), ("%s: rman %p doesn't match for resource %p", __func__, rm, r)); #endif if (rman_get_flags(r) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, r); if (error != 0) return (error); } return (rman_release_resource(r)); } /** * @brief Helper function for implementing BUS_ACTIVATE_RESOURCE(). * * This implementation of BUS_ACTIVATE_RESOURCE() activates resources * allocated by bus_generic_rman_alloc_resource. */ int bus_generic_rman_activate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct resource_map map; #ifdef INVARIANTS_XXX struct rman *rm; #endif int error; #ifdef INVARIANTS_XXX rm = BUS_GET_RMAN(dev, type, rman_get_flags(r)); KASSERT(rman_is_region_manager(r, rm), ("%s: rman %p doesn't match for resource %p", __func__, rm, r)); #endif error = rman_activate_resource(r); if (error != 0) return (error); if ((rman_get_flags(r) & RF_UNMAPPED) == 0 && (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT)) { error = BUS_MAP_RESOURCE(dev, child, type, r, NULL, &map); if (error != 0) { rman_deactivate_resource(r); return (error); } rman_set_mapping(r, &map); } return (0); } /** * @brief Helper function for implementing BUS_DEACTIVATE_RESOURCE(). * * This implementation of BUS_DEACTIVATE_RESOURCE() deactivates * resources allocated by bus_generic_rman_alloc_resource. */ int bus_generic_rman_deactivate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct resource_map map; #ifdef INVARIANTS_XXX struct rman *rm; #endif int error; #ifdef INVARIANTS_XXX rm = BUS_GET_RMAN(dev, type, rman_get_flags(r)); KASSERT(rman_is_region_manager(r, rm), ("%s: rman %p doesn't match for resource %p", __func__, rm, r)); #endif error = rman_deactivate_resource(r); if (error != 0) return (error); if ((rman_get_flags(r) & RF_UNMAPPED) == 0 && (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT)) { rman_get_mapping(r, &map); BUS_UNMAP_RESOURCE(dev, child, type, r, &map); } return (0); } /** * @brief Helper function for implementing BUS_CHILD_PRESENT(). * * This simple implementation of BUS_CHILD_PRESENT() simply calls the * BUS_CHILD_PRESENT() method of the parent of @p dev. */ int bus_generic_child_present(device_t dev, device_t child) { return (BUS_CHILD_PRESENT(device_get_parent(dev), dev)); } /** * @brief Helper function for implementing BUS_GET_DOMAIN(). * * This simple implementation of BUS_GET_DOMAIN() calls the * BUS_GET_DOMAIN() method of the parent of @p dev. If @p dev * does not have a parent, the function fails with ENOENT. */ int bus_generic_get_domain(device_t dev, device_t child, int *domain) { if (dev->parent) return (BUS_GET_DOMAIN(dev->parent, dev, domain)); return (ENOENT); } /** * @brief Helper function to implement normal BUS_GET_DEVICE_PATH() * * This function knows how to (a) pass the request up the tree if there's * a parent and (b) Knows how to supply a FreeBSD locator. * * @param bus bus in the walk up the tree * @param child leaf node to print information about * @param locator BUS_LOCATOR_xxx string for locator * @param sb Buffer to print information into */ int bus_generic_get_device_path(device_t bus, device_t child, const char *locator, struct sbuf *sb) { int rv = 0; device_t parent; /* * We don't recurse on ACPI since either we know the handle for the * device or we don't. And if we're in the generic routine, we don't * have a ACPI override. All other locators build up a path by having * their parents create a path and then adding the path element for this * node. That's why we recurse with parent, bus rather than the typical * parent, child: each spot in the tree is independent of what our child * will do with this path. */ parent = device_get_parent(bus); if (parent != NULL && strcmp(locator, BUS_LOCATOR_ACPI) != 0) { rv = BUS_GET_DEVICE_PATH(parent, bus, locator, sb); } if (strcmp(locator, BUS_LOCATOR_FREEBSD) == 0) { if (rv == 0) { sbuf_printf(sb, "/%s", device_get_nameunit(child)); } return (rv); } /* * Don't know what to do. So assume we do nothing. Not sure that's * the right thing, but keeps us from having a big list here. */ return (0); } /** * @brief Helper function for implementing BUS_RESCAN(). * * This null implementation of BUS_RESCAN() always fails to indicate * the bus does not support rescanning. */ int bus_null_rescan(device_t dev) { return (ENODEV); } /* * Some convenience functions to make it easier for drivers to use the * resource-management functions. All these really do is hide the * indirection through the parent's method table, making for slightly * less-wordy code. In the future, it might make sense for this code * to maintain some sort of a list of resources allocated by each device. */ int bus_alloc_resources(device_t dev, struct resource_spec *rs, struct resource **res) { int i; for (i = 0; rs[i].type != -1; i++) res[i] = NULL; for (i = 0; rs[i].type != -1; i++) { res[i] = bus_alloc_resource_any(dev, rs[i].type, &rs[i].rid, rs[i].flags); if (res[i] == NULL && !(rs[i].flags & RF_OPTIONAL)) { bus_release_resources(dev, rs, res); return (ENXIO); } } return (0); } void bus_release_resources(device_t dev, const struct resource_spec *rs, struct resource **res) { int i; for (i = 0; rs[i].type != -1; i++) if (res[i] != NULL) { bus_release_resource( dev, rs[i].type, rs[i].rid, res[i]); res[i] = NULL; } } /** * @brief Wrapper function for BUS_ALLOC_RESOURCE(). * * This function simply calls the BUS_ALLOC_RESOURCE() method of the * parent of @p dev. */ struct resource * bus_alloc_resource(device_t dev, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource *res; if (dev->parent == NULL) return (NULL); res = BUS_ALLOC_RESOURCE(dev->parent, dev, type, rid, start, end, count, flags); return (res); } /** * @brief Wrapper function for BUS_ADJUST_RESOURCE(). * * This function simply calls the BUS_ADJUST_RESOURCE() method of the * parent of @p dev. */ int bus_adjust_resource(device_t dev, int type, struct resource *r, rman_res_t start, rman_res_t end) { if (dev->parent == NULL) return (EINVAL); return (BUS_ADJUST_RESOURCE(dev->parent, dev, type, r, start, end)); } /** * @brief Wrapper function for BUS_TRANSLATE_RESOURCE(). * * This function simply calls the BUS_TRANSLATE_RESOURCE() method of the * parent of @p dev. */ int bus_translate_resource(device_t dev, int type, rman_res_t start, rman_res_t *newstart) { if (dev->parent == NULL) return (EINVAL); return (BUS_TRANSLATE_RESOURCE(dev->parent, type, start, newstart)); } /** * @brief Wrapper function for BUS_ACTIVATE_RESOURCE(). * * This function simply calls the BUS_ACTIVATE_RESOURCE() method of the * parent of @p dev. */ int bus_activate_resource(device_t dev, int type, int rid, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_ACTIVATE_RESOURCE(dev->parent, dev, type, rid, r)); } /** * @brief Wrapper function for BUS_DEACTIVATE_RESOURCE(). * * This function simply calls the BUS_DEACTIVATE_RESOURCE() method of the * parent of @p dev. */ int bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_DEACTIVATE_RESOURCE(dev->parent, dev, type, rid, r)); } /** * @brief Wrapper function for BUS_MAP_RESOURCE(). * * This function simply calls the BUS_MAP_RESOURCE() method of the * parent of @p dev. */ int bus_map_resource(device_t dev, int type, struct resource *r, struct resource_map_request *args, struct resource_map *map) { if (dev->parent == NULL) return (EINVAL); return (BUS_MAP_RESOURCE(dev->parent, dev, type, r, args, map)); } /** * @brief Wrapper function for BUS_UNMAP_RESOURCE(). * * This function simply calls the BUS_UNMAP_RESOURCE() method of the * parent of @p dev. */ int bus_unmap_resource(device_t dev, int type, struct resource *r, struct resource_map *map) { if (dev->parent == NULL) return (EINVAL); return (BUS_UNMAP_RESOURCE(dev->parent, dev, type, r, map)); } /** * @brief Wrapper function for BUS_RELEASE_RESOURCE(). * * This function simply calls the BUS_RELEASE_RESOURCE() method of the * parent of @p dev. */ int bus_release_resource(device_t dev, int type, int rid, struct resource *r) { int rv; if (dev->parent == NULL) return (EINVAL); rv = BUS_RELEASE_RESOURCE(dev->parent, dev, type, rid, r); return (rv); } /** * @brief Wrapper function for BUS_SETUP_INTR(). * * This function simply calls the BUS_SETUP_INTR() method of the * parent of @p dev. */ int bus_setup_intr(device_t dev, struct resource *r, int flags, driver_filter_t filter, driver_intr_t handler, void *arg, void **cookiep) { int error; if (dev->parent == NULL) return (EINVAL); error = BUS_SETUP_INTR(dev->parent, dev, r, flags, filter, handler, arg, cookiep); if (error != 0) return (error); if (handler != NULL && !(flags & INTR_MPSAFE)) device_printf(dev, "[GIANT-LOCKED]\n"); return (0); } /** * @brief Wrapper function for BUS_TEARDOWN_INTR(). * * This function simply calls the BUS_TEARDOWN_INTR() method of the * parent of @p dev. */ int bus_teardown_intr(device_t dev, struct resource *r, void *cookie) { if (dev->parent == NULL) return (EINVAL); return (BUS_TEARDOWN_INTR(dev->parent, dev, r, cookie)); } /** * @brief Wrapper function for BUS_SUSPEND_INTR(). * * This function simply calls the BUS_SUSPEND_INTR() method of the * parent of @p dev. */ int bus_suspend_intr(device_t dev, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_SUSPEND_INTR(dev->parent, dev, r)); } /** * @brief Wrapper function for BUS_RESUME_INTR(). * * This function simply calls the BUS_RESUME_INTR() method of the * parent of @p dev. */ int bus_resume_intr(device_t dev, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_RESUME_INTR(dev->parent, dev, r)); } /** * @brief Wrapper function for BUS_BIND_INTR(). * * This function simply calls the BUS_BIND_INTR() method of the * parent of @p dev. */ int bus_bind_intr(device_t dev, struct resource *r, int cpu) { if (dev->parent == NULL) return (EINVAL); return (BUS_BIND_INTR(dev->parent, dev, r, cpu)); } /** * @brief Wrapper function for BUS_DESCRIBE_INTR(). * * This function first formats the requested description into a * temporary buffer and then calls the BUS_DESCRIBE_INTR() method of * the parent of @p dev. */ int bus_describe_intr(device_t dev, struct resource *irq, void *cookie, const char *fmt, ...) { va_list ap; char descr[MAXCOMLEN + 1]; if (dev->parent == NULL) return (EINVAL); va_start(ap, fmt); vsnprintf(descr, sizeof(descr), fmt, ap); va_end(ap); return (BUS_DESCRIBE_INTR(dev->parent, dev, irq, cookie, descr)); } /** * @brief Wrapper function for BUS_SET_RESOURCE(). * * This function simply calls the BUS_SET_RESOURCE() method of the * parent of @p dev. */ int bus_set_resource(device_t dev, int type, int rid, rman_res_t start, rman_res_t count) { return (BUS_SET_RESOURCE(device_get_parent(dev), dev, type, rid, start, count)); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev. */ int bus_get_resource(device_t dev, int type, int rid, rman_res_t *startp, rman_res_t *countp) { return (BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, startp, countp)); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev and returns the start value. */ rman_res_t bus_get_resource_start(device_t dev, int type, int rid) { rman_res_t start; rman_res_t count; int error; error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, &start, &count); if (error) return (0); return (start); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev and returns the count value. */ rman_res_t bus_get_resource_count(device_t dev, int type, int rid) { rman_res_t start; rman_res_t count; int error; error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, &start, &count); if (error) return (0); return (count); } /** * @brief Wrapper function for BUS_DELETE_RESOURCE(). * * This function simply calls the BUS_DELETE_RESOURCE() method of the * parent of @p dev. */ void bus_delete_resource(device_t dev, int type, int rid) { BUS_DELETE_RESOURCE(device_get_parent(dev), dev, type, rid); } /** * @brief Wrapper function for BUS_CHILD_PRESENT(). * * This function simply calls the BUS_CHILD_PRESENT() method of the * parent of @p dev. */ int bus_child_present(device_t child) { return (BUS_CHILD_PRESENT(device_get_parent(child), child)); } /** * @brief Wrapper function for BUS_CHILD_PNPINFO(). * * This function simply calls the BUS_CHILD_PNPINFO() method of the parent of @p * dev. */ int bus_child_pnpinfo(device_t child, struct sbuf *sb) { device_t parent; parent = device_get_parent(child); if (parent == NULL) return (0); return (BUS_CHILD_PNPINFO(parent, child, sb)); } /** * @brief Generic implementation that does nothing for bus_child_pnpinfo * * This function has the right signature and returns 0 since the sbuf is passed * to us to append to. */ int bus_generic_child_pnpinfo(device_t dev, device_t child, struct sbuf *sb) { return (0); } /** * @brief Wrapper function for BUS_CHILD_LOCATION(). * * This function simply calls the BUS_CHILD_LOCATION() method of the parent of * @p dev. */ int bus_child_location(device_t child, struct sbuf *sb) { device_t parent; parent = device_get_parent(child); if (parent == NULL) return (0); return (BUS_CHILD_LOCATION(parent, child, sb)); } /** * @brief Generic implementation that does nothing for bus_child_location * * This function has the right signature and returns 0 since the sbuf is passed * to us to append to. */ int bus_generic_child_location(device_t dev, device_t child, struct sbuf *sb) { return (0); } /** * @brief Wrapper function for BUS_GET_CPUS(). * * This function simply calls the BUS_GET_CPUS() method of the * parent of @p dev. */ int bus_get_cpus(device_t dev, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return (EINVAL); return (BUS_GET_CPUS(parent, dev, op, setsize, cpuset)); } /** * @brief Wrapper function for BUS_GET_DMA_TAG(). * * This function simply calls the BUS_GET_DMA_TAG() method of the * parent of @p dev. */ bus_dma_tag_t bus_get_dma_tag(device_t dev) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return (NULL); return (BUS_GET_DMA_TAG(parent, dev)); } /** * @brief Wrapper function for BUS_GET_BUS_TAG(). * * This function simply calls the BUS_GET_BUS_TAG() method of the * parent of @p dev. */ bus_space_tag_t bus_get_bus_tag(device_t dev) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return ((bus_space_tag_t)0); return (BUS_GET_BUS_TAG(parent, dev)); } /** * @brief Wrapper function for BUS_GET_DOMAIN(). * * This function simply calls the BUS_GET_DOMAIN() method of the * parent of @p dev. */ int bus_get_domain(device_t dev, int *domain) { return (BUS_GET_DOMAIN(device_get_parent(dev), dev, domain)); } /* Resume all devices and then notify userland that we're up again. */ static int root_resume(device_t dev) { int error; error = bus_generic_resume(dev); if (error == 0) { devctl_notify("kernel", "power", "resume", NULL); } return (error); } static int root_print_child(device_t dev, device_t child) { int retval = 0; retval += bus_print_child_header(dev, child); retval += printf("\n"); return (retval); } static int root_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filter, driver_intr_t *intr, void *arg, void **cookiep) { /* * If an interrupt mapping gets to here something bad has happened. */ panic("root_setup_intr"); } /* * If we get here, assume that the device is permanent and really is * present in the system. Removable bus drivers are expected to intercept * this call long before it gets here. We return -1 so that drivers that * really care can check vs -1 or some ERRNO returned higher in the food * chain. */ static int root_child_present(device_t dev, device_t child) { return (-1); } static int root_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { switch (op) { case INTR_CPUS: /* Default to returning the set of all CPUs. */ if (setsize != sizeof(cpuset_t)) return (EINVAL); *cpuset = all_cpus; return (0); default: return (EINVAL); } } static kobj_method_t root_methods[] = { /* Device interface */ KOBJMETHOD(device_shutdown, bus_generic_shutdown), KOBJMETHOD(device_suspend, bus_generic_suspend), KOBJMETHOD(device_resume, root_resume), /* Bus interface */ KOBJMETHOD(bus_print_child, root_print_child), KOBJMETHOD(bus_read_ivar, bus_generic_read_ivar), KOBJMETHOD(bus_write_ivar, bus_generic_write_ivar), KOBJMETHOD(bus_setup_intr, root_setup_intr), KOBJMETHOD(bus_child_present, root_child_present), KOBJMETHOD(bus_get_cpus, root_get_cpus), KOBJMETHOD_END }; static driver_t root_driver = { "root", root_methods, 1, /* no softc */ }; device_t root_bus; devclass_t root_devclass; static int root_bus_module_handler(module_t mod, int what, void* arg) { switch (what) { case MOD_LOAD: TAILQ_INIT(&bus_data_devices); kobj_class_compile((kobj_class_t) &root_driver); root_bus = make_device(NULL, "root", 0); root_bus->desc = "System root bus"; kobj_init((kobj_t) root_bus, (kobj_class_t) &root_driver); root_bus->driver = &root_driver; root_bus->state = DS_ATTACHED; root_devclass = devclass_find_internal("root", NULL, FALSE); devctl2_init(); return (0); case MOD_SHUTDOWN: device_shutdown(root_bus); return (0); default: return (EOPNOTSUPP); } return (0); } static moduledata_t root_bus_mod = { "rootbus", root_bus_module_handler, NULL }; DECLARE_MODULE(rootbus, root_bus_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); /** * @brief Automatically configure devices * * This function begins the autoconfiguration process by calling * device_probe_and_attach() for each child of the @c root0 device. */ void root_bus_configure(void) { PDEBUG((".")); /* Eventually this will be split up, but this is sufficient for now. */ bus_set_pass(BUS_PASS_DEFAULT); } /** * @brief Module handler for registering device drivers * * This module handler is used to automatically register device * drivers when modules are loaded. If @p what is MOD_LOAD, it calls * devclass_add_driver() for the driver described by the * driver_module_data structure pointed to by @p arg */ int driver_module_handler(module_t mod, int what, void *arg) { struct driver_module_data *dmd; devclass_t bus_devclass; kobj_class_t driver; int error, pass; dmd = (struct driver_module_data *)arg; bus_devclass = devclass_find_internal(dmd->dmd_busname, NULL, TRUE); error = 0; switch (what) { case MOD_LOAD: if (dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); pass = dmd->dmd_pass; driver = dmd->dmd_driver; PDEBUG(("Loading module: driver %s on bus %s (pass %d)", DRIVERNAME(driver), dmd->dmd_busname, pass)); error = devclass_add_driver(bus_devclass, driver, pass, dmd->dmd_devclass); break; case MOD_UNLOAD: PDEBUG(("Unloading module: driver %s from bus %s", DRIVERNAME(dmd->dmd_driver), dmd->dmd_busname)); error = devclass_delete_driver(bus_devclass, dmd->dmd_driver); if (!error && dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); break; case MOD_QUIESCE: PDEBUG(("Quiesce module: driver %s from bus %s", DRIVERNAME(dmd->dmd_driver), dmd->dmd_busname)); error = devclass_quiesce_driver(bus_devclass, dmd->dmd_driver); if (!error && dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); break; default: error = EOPNOTSUPP; break; } return (error); } /** * @brief Enumerate all hinted devices for this bus. * * Walks through the hints for this bus and calls the bus_hinted_child * routine for each one it fines. It searches first for the specific * bus that's being probed for hinted children (eg isa0), and then for * generic children (eg isa). * * @param dev bus device to enumerate */ void bus_enumerate_hinted_children(device_t bus) { int i; const char *dname, *busname; int dunit; /* * enumerate all devices on the specific bus */ busname = device_get_nameunit(bus); i = 0; while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0) BUS_HINTED_CHILD(bus, dname, dunit); /* * and all the generic ones. */ busname = device_get_name(bus); i = 0; while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0) BUS_HINTED_CHILD(bus, dname, dunit); } #ifdef BUS_DEBUG /* the _short versions avoid iteration by not calling anything that prints * more than oneliners. I love oneliners. */ static void print_device_short(device_t dev, int indent) { if (!dev) return; indentprintf(("device %d: <%s> %sparent,%schildren,%s%s%s%s%s,%sivars,%ssoftc,busy=%d\n", dev->unit, dev->desc, (dev->parent? "":"no "), (TAILQ_EMPTY(&dev->children)? "no ":""), (dev->flags&DF_ENABLED? "enabled,":"disabled,"), (dev->flags&DF_FIXEDCLASS? "fixed,":""), (dev->flags&DF_WILDCARD? "wildcard,":""), (dev->flags&DF_DESCMALLOCED? "descmalloced,":""), (dev->flags&DF_SUSPENDED? "suspended,":""), (dev->ivars? "":"no "), (dev->softc? "":"no "), dev->busy)); } static void print_device(device_t dev, int indent) { if (!dev) return; print_device_short(dev, indent); indentprintf(("Parent:\n")); print_device_short(dev->parent, indent+1); indentprintf(("Driver:\n")); print_driver_short(dev->driver, indent+1); indentprintf(("Devclass:\n")); print_devclass_short(dev->devclass, indent+1); } void print_device_tree_short(device_t dev, int indent) /* print the device and all its children (indented) */ { device_t child; if (!dev) return; print_device_short(dev, indent); TAILQ_FOREACH(child, &dev->children, link) { print_device_tree_short(child, indent+1); } } void print_device_tree(device_t dev, int indent) /* print the device and all its children (indented) */ { device_t child; if (!dev) return; print_device(dev, indent); TAILQ_FOREACH(child, &dev->children, link) { print_device_tree(child, indent+1); } } static void print_driver_short(driver_t *driver, int indent) { if (!driver) return; indentprintf(("driver %s: softc size = %zd\n", driver->name, driver->size)); } static void print_driver(driver_t *driver, int indent) { if (!driver) return; print_driver_short(driver, indent); } static void print_driver_list(driver_list_t drivers, int indent) { driverlink_t driver; TAILQ_FOREACH(driver, &drivers, link) { print_driver(driver->driver, indent); } } static void print_devclass_short(devclass_t dc, int indent) { if ( !dc ) return; indentprintf(("devclass %s: max units = %d\n", dc->name, dc->maxunit)); } static void print_devclass(devclass_t dc, int indent) { int i; if ( !dc ) return; print_devclass_short(dc, indent); indentprintf(("Drivers:\n")); print_driver_list(dc->drivers, indent+1); indentprintf(("Devices:\n")); for (i = 0; i < dc->maxunit; i++) if (dc->devices[i]) print_device(dc->devices[i], indent+1); } void print_devclass_list_short(void) { devclass_t dc; printf("Short listing of devclasses, drivers & devices:\n"); TAILQ_FOREACH(dc, &devclasses, link) { print_devclass_short(dc, 0); } } void print_devclass_list(void) { devclass_t dc; printf("Full listing of devclasses, drivers & devices:\n"); TAILQ_FOREACH(dc, &devclasses, link) { print_devclass(dc, 0); } } #endif /* * User-space access to the device tree. * * We implement a small set of nodes: * * hw.bus Single integer read method to obtain the * current generation count. * hw.bus.devices Reads the entire device tree in flat space. * hw.bus.rman Resource manager interface * * We might like to add the ability to scan devclasses and/or drivers to * determine what else is currently loaded/available. */ static int sysctl_bus_info(SYSCTL_HANDLER_ARGS) { struct u_businfo ubus; ubus.ub_version = BUS_USER_VERSION; ubus.ub_generation = bus_data_generation; return (SYSCTL_OUT(req, &ubus, sizeof(ubus))); } SYSCTL_PROC(_hw_bus, OID_AUTO, info, CTLTYPE_STRUCT | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_bus_info, "S,u_businfo", "bus-related data"); static int sysctl_devices(SYSCTL_HANDLER_ARGS) { struct sbuf sb; int *name = (int *)arg1; u_int namelen = arg2; int index; device_t dev; struct u_device *udev; int error; if (namelen != 2) return (EINVAL); if (bus_data_generation_check(name[0])) return (EINVAL); index = name[1]; /* * Scan the list of devices, looking for the requested index. */ TAILQ_FOREACH(dev, &bus_data_devices, devlink) { if (index-- == 0) break; } if (dev == NULL) return (ENOENT); /* * Populate the return item, careful not to overflow the buffer. */ udev = malloc(sizeof(*udev), M_BUS, M_WAITOK | M_ZERO); - if (udev == NULL) - return (ENOMEM); udev->dv_handle = (uintptr_t)dev; udev->dv_parent = (uintptr_t)dev->parent; udev->dv_devflags = dev->devflags; udev->dv_flags = dev->flags; udev->dv_state = dev->state; sbuf_new(&sb, udev->dv_fields, sizeof(udev->dv_fields), SBUF_FIXEDLEN); if (dev->nameunit != NULL) sbuf_cat(&sb, dev->nameunit); sbuf_putc(&sb, '\0'); if (dev->desc != NULL) sbuf_cat(&sb, dev->desc); sbuf_putc(&sb, '\0'); if (dev->driver != NULL) sbuf_cat(&sb, dev->driver->name); sbuf_putc(&sb, '\0'); bus_child_pnpinfo(dev, &sb); sbuf_putc(&sb, '\0'); bus_child_location(dev, &sb); sbuf_putc(&sb, '\0'); error = sbuf_finish(&sb); if (error == 0) error = SYSCTL_OUT(req, udev, sizeof(*udev)); sbuf_delete(&sb); free(udev, M_BUS); return (error); } SYSCTL_NODE(_hw_bus, OID_AUTO, devices, CTLFLAG_RD | CTLFLAG_NEEDGIANT, sysctl_devices, "system device tree"); int bus_data_generation_check(int generation) { if (generation != bus_data_generation) return (1); /* XXX generate optimised lists here? */ return (0); } void bus_data_generation_update(void) { atomic_add_int(&bus_data_generation, 1); } int bus_free_resource(device_t dev, int type, struct resource *r) { if (r == NULL) return (0); return (bus_release_resource(dev, type, rman_get_rid(r), r)); } device_t device_lookup_by_name(const char *name) { device_t dev; TAILQ_FOREACH(dev, &bus_data_devices, devlink) { if (dev->nameunit != NULL && strcmp(dev->nameunit, name) == 0) return (dev); } return (NULL); } /* * /dev/devctl2 implementation. The existing /dev/devctl device has * implicit semantics on open, so it could not be reused for this. * Another option would be to call this /dev/bus? */ static int find_device(struct devreq *req, device_t *devp) { device_t dev; /* * First, ensure that the name is nul terminated. */ if (memchr(req->dr_name, '\0', sizeof(req->dr_name)) == NULL) return (EINVAL); /* * Second, try to find an attached device whose name matches * 'name'. */ dev = device_lookup_by_name(req->dr_name); if (dev != NULL) { *devp = dev; return (0); } /* Finally, give device enumerators a chance. */ dev = NULL; EVENTHANDLER_DIRECT_INVOKE(dev_lookup, req->dr_name, &dev); if (dev == NULL) return (ENOENT); *devp = dev; return (0); } static bool driver_exists(device_t bus, const char *driver) { devclass_t dc; for (dc = bus->devclass; dc != NULL; dc = dc->parent) { if (devclass_find_driver_internal(dc, driver) != NULL) return (true); } return (false); } static void device_gen_nomatch(device_t dev) { device_t child; if (dev->flags & DF_NEEDNOMATCH && dev->state == DS_NOTPRESENT) { device_handle_nomatch(dev); } dev->flags &= ~DF_NEEDNOMATCH; TAILQ_FOREACH(child, &dev->children, link) { device_gen_nomatch(child); } } static void device_do_deferred_actions(void) { devclass_t dc; driverlink_t dl; /* * Walk through the devclasses to find all the drivers we've tagged as * deferred during the freeze and call the driver added routines. They * have already been added to the lists in the background, so the driver * added routines that trigger a probe will have all the right bidders * for the probe auction. */ TAILQ_FOREACH(dc, &devclasses, link) { TAILQ_FOREACH(dl, &dc->drivers, link) { if (dl->flags & DL_DEFERRED_PROBE) { devclass_driver_added(dc, dl->driver); dl->flags &= ~DL_DEFERRED_PROBE; } } } /* * We also defer no-match events during a freeze. Walk the tree and * generate all the pent-up events that are still relevant. */ device_gen_nomatch(root_bus); bus_data_generation_update(); } static int device_get_path(device_t dev, const char *locator, struct sbuf *sb) { device_t parent; int error; KASSERT(sb != NULL, ("sb is NULL")); parent = device_get_parent(dev); if (parent == NULL) { error = sbuf_printf(sb, "/"); } else { error = BUS_GET_DEVICE_PATH(parent, dev, locator, sb); if (error == 0) { error = sbuf_error(sb); if (error == 0 && sbuf_len(sb) <= 1) error = EIO; } } sbuf_finish(sb); return (error); } static int devctl2_ioctl(struct cdev *cdev, u_long cmd, caddr_t data, int fflag, struct thread *td) { struct devreq *req; device_t dev; int error, old; /* Locate the device to control. */ bus_topo_lock(); req = (struct devreq *)data; switch (cmd) { case DEV_ATTACH: case DEV_DETACH: case DEV_ENABLE: case DEV_DISABLE: case DEV_SUSPEND: case DEV_RESUME: case DEV_SET_DRIVER: case DEV_CLEAR_DRIVER: case DEV_RESCAN: case DEV_DELETE: case DEV_RESET: error = priv_check(td, PRIV_DRIVER); if (error == 0) error = find_device(req, &dev); break; case DEV_FREEZE: case DEV_THAW: error = priv_check(td, PRIV_DRIVER); break; case DEV_GET_PATH: error = find_device(req, &dev); break; default: error = ENOTTY; break; } if (error) { bus_topo_unlock(); return (error); } /* Perform the requested operation. */ switch (cmd) { case DEV_ATTACH: if (device_is_attached(dev)) error = EBUSY; else if (!device_is_enabled(dev)) error = ENXIO; else error = device_probe_and_attach(dev); break; case DEV_DETACH: if (!device_is_attached(dev)) { error = ENXIO; break; } if (!(req->dr_flags & DEVF_FORCE_DETACH)) { error = device_quiesce(dev); if (error) break; } error = device_detach(dev); break; case DEV_ENABLE: if (device_is_enabled(dev)) { error = EBUSY; break; } /* * If the device has been probed but not attached (e.g. * when it has been disabled by a loader hint), just * attach the device rather than doing a full probe. */ device_enable(dev); if (device_is_alive(dev)) { /* * If the device was disabled via a hint, clear * the hint. */ if (resource_disabled(dev->driver->name, dev->unit)) resource_unset_value(dev->driver->name, dev->unit, "disabled"); error = device_attach(dev); } else error = device_probe_and_attach(dev); break; case DEV_DISABLE: if (!device_is_enabled(dev)) { error = ENXIO; break; } if (!(req->dr_flags & DEVF_FORCE_DETACH)) { error = device_quiesce(dev); if (error) break; } /* * Force DF_FIXEDCLASS on around detach to preserve * the existing name. */ old = dev->flags; dev->flags |= DF_FIXEDCLASS; error = device_detach(dev); if (!(old & DF_FIXEDCLASS)) dev->flags &= ~DF_FIXEDCLASS; if (error == 0) device_disable(dev); break; case DEV_SUSPEND: if (device_is_suspended(dev)) { error = EBUSY; break; } if (device_get_parent(dev) == NULL) { error = EINVAL; break; } error = BUS_SUSPEND_CHILD(device_get_parent(dev), dev); break; case DEV_RESUME: if (!device_is_suspended(dev)) { error = EINVAL; break; } if (device_get_parent(dev) == NULL) { error = EINVAL; break; } error = BUS_RESUME_CHILD(device_get_parent(dev), dev); break; case DEV_SET_DRIVER: { devclass_t dc; char driver[128]; error = copyinstr(req->dr_data, driver, sizeof(driver), NULL); if (error) break; if (driver[0] == '\0') { error = EINVAL; break; } if (dev->devclass != NULL && strcmp(driver, dev->devclass->name) == 0) /* XXX: Could possibly force DF_FIXEDCLASS on? */ break; /* * Scan drivers for this device's bus looking for at * least one matching driver. */ if (dev->parent == NULL) { error = EINVAL; break; } if (!driver_exists(dev->parent, driver)) { error = ENOENT; break; } dc = devclass_create(driver); if (dc == NULL) { error = ENOMEM; break; } /* Detach device if necessary. */ if (device_is_attached(dev)) { if (req->dr_flags & DEVF_SET_DRIVER_DETACH) error = device_detach(dev); else error = EBUSY; if (error) break; } /* Clear any previously-fixed device class and unit. */ if (dev->flags & DF_FIXEDCLASS) devclass_delete_device(dev->devclass, dev); dev->flags |= DF_WILDCARD; dev->unit = -1; /* Force the new device class. */ error = devclass_add_device(dc, dev); if (error) break; dev->flags |= DF_FIXEDCLASS; error = device_probe_and_attach(dev); break; } case DEV_CLEAR_DRIVER: if (!(dev->flags & DF_FIXEDCLASS)) { error = 0; break; } if (device_is_attached(dev)) { if (req->dr_flags & DEVF_CLEAR_DRIVER_DETACH) error = device_detach(dev); else error = EBUSY; if (error) break; } dev->flags &= ~DF_FIXEDCLASS; dev->flags |= DF_WILDCARD; devclass_delete_device(dev->devclass, dev); error = device_probe_and_attach(dev); break; case DEV_RESCAN: if (!device_is_attached(dev)) { error = ENXIO; break; } error = BUS_RESCAN(dev); break; case DEV_DELETE: { device_t parent; parent = device_get_parent(dev); if (parent == NULL) { error = EINVAL; break; } if (!(req->dr_flags & DEVF_FORCE_DELETE)) { if (bus_child_present(dev) != 0) { error = EBUSY; break; } } error = device_delete_child(parent, dev); break; } case DEV_FREEZE: if (device_frozen) error = EBUSY; else device_frozen = true; break; case DEV_THAW: if (!device_frozen) error = EBUSY; else { device_do_deferred_actions(); device_frozen = false; } break; case DEV_RESET: if ((req->dr_flags & ~(DEVF_RESET_DETACH)) != 0) { error = EINVAL; break; } error = BUS_RESET_CHILD(device_get_parent(dev), dev, req->dr_flags); break; case DEV_GET_PATH: { struct sbuf *sb; char locator[64]; ssize_t len; error = copyinstr(req->dr_buffer.buffer, locator, sizeof(locator), NULL); if (error != 0) break; sb = sbuf_new(NULL, NULL, 0, SBUF_AUTOEXTEND | SBUF_INCLUDENUL /* | SBUF_WAITOK */); error = device_get_path(dev, locator, sb); if (error == 0) { len = sbuf_len(sb); if (req->dr_buffer.length < len) { error = ENAMETOOLONG; } else { error = copyout(sbuf_data(sb), req->dr_buffer.buffer, len); } req->dr_buffer.length = len; } sbuf_delete(sb); break; } } bus_topo_unlock(); return (error); } static struct cdevsw devctl2_cdevsw = { .d_version = D_VERSION, .d_ioctl = devctl2_ioctl, .d_name = "devctl2", }; static void devctl2_init(void) { make_dev_credf(MAKEDEV_ETERNAL, &devctl2_cdevsw, 0, NULL, UID_ROOT, GID_WHEEL, 0644, "devctl2"); } /* * For maintaining device 'at' location info to avoid recomputing it */ struct device_location_node { const char *dln_locator; const char *dln_path; TAILQ_ENTRY(device_location_node) dln_link; }; typedef TAILQ_HEAD(device_location_list, device_location_node) device_location_list_t; struct device_location_cache { device_location_list_t dlc_list; }; /* * Location cache for wired devices. */ device_location_cache_t * dev_wired_cache_init(void) { device_location_cache_t *dcp; dcp = malloc(sizeof(*dcp), M_BUS, M_WAITOK | M_ZERO); TAILQ_INIT(&dcp->dlc_list); return (dcp); } void dev_wired_cache_fini(device_location_cache_t *dcp) { struct device_location_node *dln, *tdln; TAILQ_FOREACH_SAFE(dln, &dcp->dlc_list, dln_link, tdln) { free(dln, M_BUS); } free(dcp, M_BUS); } static struct device_location_node * dev_wired_cache_lookup(device_location_cache_t *dcp, const char *locator) { struct device_location_node *dln; TAILQ_FOREACH(dln, &dcp->dlc_list, dln_link) { if (strcmp(locator, dln->dln_locator) == 0) return (dln); } return (NULL); } static struct device_location_node * dev_wired_cache_add(device_location_cache_t *dcp, const char *locator, const char *path) { struct device_location_node *dln; size_t loclen, pathlen; loclen = strlen(locator) + 1; pathlen = strlen(path) + 1; dln = malloc(sizeof(*dln) + loclen + pathlen, M_BUS, M_WAITOK | M_ZERO); dln->dln_locator = (char *)(dln + 1); memcpy(__DECONST(char *, dln->dln_locator), locator, loclen); dln->dln_path = dln->dln_locator + loclen; memcpy(__DECONST(char *, dln->dln_path), path, pathlen); TAILQ_INSERT_HEAD(&dcp->dlc_list, dln, dln_link); return (dln); } bool dev_wired_cache_match(device_location_cache_t *dcp, device_t dev, const char *at) { struct sbuf *sb; const char *cp; char locator[32]; int error, len; struct device_location_node *res; cp = strchr(at, ':'); if (cp == NULL) return (false); len = cp - at; if (len > sizeof(locator) - 1) /* Skip too long locator */ return (false); memcpy(locator, at, len); locator[len] = '\0'; cp++; error = 0; /* maybe cache this inside device_t and look that up, but not yet */ res = dev_wired_cache_lookup(dcp, locator); if (res == NULL) { sb = sbuf_new(NULL, NULL, 0, SBUF_AUTOEXTEND | SBUF_INCLUDENUL | SBUF_NOWAIT); if (sb != NULL) { error = device_get_path(dev, locator, sb); if (error == 0) { res = dev_wired_cache_add(dcp, locator, sbuf_data(sb)); } sbuf_delete(sb); } } if (error != 0 || res == NULL || res->dln_path == NULL) return (false); return (strcmp(res->dln_path, cp) == 0); } /* * APIs to manage deprecation and obsolescence. */ static int obsolete_panic = 0; SYSCTL_INT(_debug, OID_AUTO, obsolete_panic, CTLFLAG_RWTUN, &obsolete_panic, 0, "Panic when obsolete features are used (0 = never, 1 = if obsolete, " "2 = if deprecated)"); static void gone_panic(int major, int running, const char *msg) { switch (obsolete_panic) { case 0: return; case 1: if (running < major) return; /* FALLTHROUGH */ default: panic("%s", msg); } } void _gone_in(int major, const char *msg) { gone_panic(major, P_OSREL_MAJOR(__FreeBSD_version), msg); if (P_OSREL_MAJOR(__FreeBSD_version) >= major) printf("Obsolete code will be removed soon: %s\n", msg); else printf("Deprecated code (to be removed in FreeBSD %d): %s\n", major, msg); } void _gone_in_dev(device_t dev, int major, const char *msg) { gone_panic(major, P_OSREL_MAJOR(__FreeBSD_version), msg); if (P_OSREL_MAJOR(__FreeBSD_version) >= major) device_printf(dev, "Obsolete code will be removed soon: %s\n", msg); else device_printf(dev, "Deprecated code (to be removed in FreeBSD %d): %s\n", major, msg); } #ifdef DDB DB_SHOW_COMMAND(device, db_show_device) { device_t dev; if (!have_addr) return; dev = (device_t)addr; db_printf("name: %s\n", device_get_nameunit(dev)); db_printf(" driver: %s\n", DRIVERNAME(dev->driver)); db_printf(" class: %s\n", DEVCLANAME(dev->devclass)); db_printf(" addr: %p\n", dev); db_printf(" parent: %p\n", dev->parent); db_printf(" softc: %p\n", dev->softc); db_printf(" ivars: %p\n", dev->ivars); } DB_SHOW_ALL_COMMAND(devices, db_show_all_devices) { device_t dev; TAILQ_FOREACH(dev, &bus_data_devices, devlink) { db_show_device((db_expr_t)dev, true, count, modif); } } #endif