diff --git a/sys/cam/cam_periph.c b/sys/cam/cam_periph.c index 54fe9a0ef40c..1203ac2d9b21 100644 --- a/sys/cam/cam_periph.c +++ b/sys/cam/cam_periph.c @@ -1,2197 +1,2197 @@ /*- * Common functions for CAM "type" (peripheral) drivers. * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997, 1998 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, bool wired, path_id_t pathid, target_id_t target, lun_id_t lun); static u_int camperiphunit(struct periph_driver *p_drv, path_id_t pathid, target_id_t target, lun_id_t lun, const char *sn); static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb); static void camperiphfree(struct cam_periph *periph); static int camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string); static int camperiphscsisenseerror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string); static void cam_periph_devctl_notify(union ccb *ccb); static int nperiph_drivers; static int initialized = 0; struct periph_driver **periph_drivers; static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers"); static int periph_selto_delay = 1000; TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay); static int periph_noresrc_delay = 500; TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay); static int periph_busy_delay = 500; TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay); static u_int periph_mapmem_thresh = 65536; SYSCTL_UINT(_kern_cam, OID_AUTO, mapmem_thresh, CTLFLAG_RWTUN, &periph_mapmem_thresh, 0, "Threshold for user-space buffer mapping"); void periphdriver_register(void *data) { struct periph_driver *drv = (struct periph_driver *)data; struct periph_driver **newdrivers, **old; int ndrivers; again: ndrivers = nperiph_drivers + 2; newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH, M_WAITOK); xpt_lock_buses(); if (ndrivers != nperiph_drivers + 2) { /* * Lost race against itself; go around. */ xpt_unlock_buses(); free(newdrivers, M_CAMPERIPH); goto again; } if (periph_drivers) bcopy(periph_drivers, newdrivers, sizeof(*newdrivers) * nperiph_drivers); newdrivers[nperiph_drivers] = drv; newdrivers[nperiph_drivers + 1] = NULL; old = periph_drivers; periph_drivers = newdrivers; nperiph_drivers++; xpt_unlock_buses(); if (old) free(old, M_CAMPERIPH); /* If driver marked as early or it is late now, initialize it. */ if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || initialized > 1) (*drv->init)(); } int periphdriver_unregister(void *data) { struct periph_driver *drv = (struct periph_driver *)data; int error, n; /* If driver marked as early or it is late now, deinitialize it. */ if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || initialized > 1) { if (drv->deinit == NULL) { printf("CAM periph driver '%s' doesn't have deinit.\n", drv->driver_name); return (EOPNOTSUPP); } error = drv->deinit(); if (error != 0) return (error); } xpt_lock_buses(); for (n = 0; n < nperiph_drivers && periph_drivers[n] != drv; n++) ; KASSERT(n < nperiph_drivers, ("Periph driver '%s' was not registered", drv->driver_name)); for (; n + 1 < nperiph_drivers; n++) periph_drivers[n] = periph_drivers[n + 1]; periph_drivers[n + 1] = NULL; nperiph_drivers--; xpt_unlock_buses(); return (0); } void periphdriver_init(int level) { int i, early; initialized = max(initialized, level); for (i = 0; periph_drivers[i] != NULL; i++) { early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2; if (early == initialized) (*periph_drivers[i]->init)(); } } cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *path, ac_callback_t *ac_callback, ac_code code, void *arg) { struct periph_driver **p_drv; struct cam_sim *sim; struct cam_periph *periph; struct cam_periph *cur_periph; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; cam_status status; u_int init_level; init_level = 0; /* * Handle Hot-Plug scenarios. If there is already a peripheral * of our type assigned to this path, we are likely waiting for * final close on an old, invalidated, peripheral. If this is * the case, queue up a deferred call to the peripheral's async * handler. If it looks like a mistaken re-allocation, complain. */ if ((periph = cam_periph_find(path, name)) != NULL) { if ((periph->flags & CAM_PERIPH_INVALID) != 0 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; periph->deferred_callback = ac_callback; periph->deferred_ac = code; return (CAM_REQ_INPROG); } else { printf("cam_periph_alloc: attempt to re-allocate " "valid device %s%d rejected flags %#x " "refcount %d\n", periph->periph_name, periph->unit_number, periph->flags, periph->refcount); } return (CAM_REQ_INVALID); } periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH, M_NOWAIT|M_ZERO); if (periph == NULL) return (CAM_RESRC_UNAVAIL); init_level++; sim = xpt_path_sim(path); path_id = xpt_path_path_id(path); target_id = xpt_path_target_id(path); lun_id = xpt_path_lun_id(path); periph->periph_start = periph_start; periph->periph_dtor = periph_dtor; periph->periph_oninval = periph_oninvalidate; periph->type = type; periph->periph_name = name; periph->scheduled_priority = CAM_PRIORITY_NONE; periph->immediate_priority = CAM_PRIORITY_NONE; periph->refcount = 1; /* Dropped by invalidation. */ periph->sim = sim; SLIST_INIT(&periph->ccb_list); status = xpt_create_path(&path, periph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) goto failure; periph->path = path; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, name) == 0) break; } if (*p_drv == NULL) { printf("cam_periph_alloc: invalid periph name '%s'\n", name); xpt_unlock_buses(); xpt_free_path(periph->path); free(periph, M_CAMPERIPH); return (CAM_REQ_INVALID); } periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id, path->device->serial_num); cur_periph = TAILQ_FIRST(&(*p_drv)->units); while (cur_periph != NULL && cur_periph->unit_number < periph->unit_number) cur_periph = TAILQ_NEXT(cur_periph, unit_links); if (cur_periph != NULL) { KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list")); TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); } else { TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); (*p_drv)->generation++; } xpt_unlock_buses(); init_level++; status = xpt_add_periph(periph); if (status != CAM_REQ_CMP) goto failure; init_level++; CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n")); status = periph_ctor(periph, arg); if (status == CAM_REQ_CMP) init_level++; failure: switch (init_level) { case 4: /* Initialized successfully */ break; case 3: CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); xpt_remove_periph(periph); /* FALLTHROUGH */ case 2: xpt_lock_buses(); TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); xpt_unlock_buses(); xpt_free_path(periph->path); /* FALLTHROUGH */ case 1: free(periph, M_CAMPERIPH); /* FALLTHROUGH */ case 0: /* No cleanup to perform. */ break; default: panic("%s: Unknown init level", __func__); } return(status); } /* * Find a peripheral structure with the specified path, target, lun, * and (optionally) type. If the name is NULL, this function will return * the first peripheral driver that matches the specified path. */ struct cam_periph * cam_periph_find(struct cam_path *path, char *name) { struct periph_driver **p_drv; struct cam_periph *periph; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) continue; TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { if (xpt_path_comp(periph->path, path) == 0) { xpt_unlock_buses(); cam_periph_assert(periph, MA_OWNED); return(periph); } } if (name != NULL) { xpt_unlock_buses(); return(NULL); } } xpt_unlock_buses(); return(NULL); } /* * Find peripheral driver instances attached to the specified path. */ int cam_periph_list(struct cam_path *path, struct sbuf *sb) { struct sbuf local_sb; struct periph_driver **p_drv; struct cam_periph *periph; int count; int sbuf_alloc_len; sbuf_alloc_len = 16; retry: sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN); count = 0; xpt_lock_buses(); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { if (xpt_path_comp(periph->path, path) != 0) continue; if (sbuf_len(&local_sb) != 0) sbuf_cat(&local_sb, ","); sbuf_printf(&local_sb, "%s%d", periph->periph_name, periph->unit_number); if (sbuf_error(&local_sb) == ENOMEM) { sbuf_alloc_len *= 2; xpt_unlock_buses(); sbuf_delete(&local_sb); goto retry; } count++; } } xpt_unlock_buses(); sbuf_finish(&local_sb); if (sbuf_len(sb) != 0) sbuf_cat(sb, ","); sbuf_cat(sb, sbuf_data(&local_sb)); sbuf_delete(&local_sb); return (count); } int cam_periph_acquire(struct cam_periph *periph) { int status; if (periph == NULL) return (EINVAL); status = ENOENT; xpt_lock_buses(); if ((periph->flags & CAM_PERIPH_INVALID) == 0) { periph->refcount++; status = 0; } xpt_unlock_buses(); return (status); } void cam_periph_doacquire(struct cam_periph *periph) { xpt_lock_buses(); KASSERT(periph->refcount >= 1, ("cam_periph_doacquire() with refcount == %d", periph->refcount)); periph->refcount++; xpt_unlock_buses(); } void cam_periph_release_locked_buses(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); KASSERT(periph->refcount >= 1, ("periph->refcount >= 1")); if (--periph->refcount == 0) camperiphfree(periph); } void cam_periph_release_locked(struct cam_periph *periph) { if (periph == NULL) return; xpt_lock_buses(); cam_periph_release_locked_buses(periph); xpt_unlock_buses(); } void cam_periph_release(struct cam_periph *periph) { struct mtx *mtx; if (periph == NULL) return; cam_periph_assert(periph, MA_NOTOWNED); mtx = cam_periph_mtx(periph); mtx_lock(mtx); cam_periph_release_locked(periph); mtx_unlock(mtx); } /* * hold/unhold act as mutual exclusion for sections of the code that * need to sleep and want to make sure that other sections that * will interfere are held off. This only protects exclusive sections * from each other. */ int cam_periph_hold(struct cam_periph *periph, int priority) { int error; /* * Increment the reference count on the peripheral * while we wait for our lock attempt to succeed * to ensure the peripheral doesn't disappear out * from user us while we sleep. */ if (cam_periph_acquire(periph) != 0) return (ENXIO); cam_periph_assert(periph, MA_OWNED); while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { periph->flags |= CAM_PERIPH_LOCK_WANTED; if ((error = cam_periph_sleep(periph, periph, priority, "caplck", 0)) != 0) { cam_periph_release_locked(periph); return (error); } if (periph->flags & CAM_PERIPH_INVALID) { cam_periph_release_locked(periph); return (ENXIO); } } periph->flags |= CAM_PERIPH_LOCKED; return (0); } void cam_periph_unhold(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); periph->flags &= ~CAM_PERIPH_LOCKED; if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { periph->flags &= ~CAM_PERIPH_LOCK_WANTED; wakeup(periph); } cam_periph_release_locked(periph); } /* * Look for the next unit number that is not currently in use for this * peripheral type starting at "newunit". Also exclude unit numbers that * are reserved by for future "hardwiring" unless we already know that this * is a potential wired device. Only assume that the device is "wired" the * first time through the loop since after that we'll be looking at unit * numbers that did not match a wiring entry. */ static u_int camperiphnextunit(struct periph_driver *p_drv, u_int newunit, bool wired, path_id_t pathid, target_id_t target, lun_id_t lun) { struct cam_periph *periph; char *periph_name; int i, val, dunit, r; const char *dname, *strval; periph_name = p_drv->driver_name; for (;;newunit++) { for (periph = TAILQ_FIRST(&p_drv->units); periph != NULL && periph->unit_number != newunit; periph = TAILQ_NEXT(periph, unit_links)) ; if (periph != NULL && periph->unit_number == newunit) { if (wired) { xpt_print(periph->path, "Duplicate Wired " "Device entry!\n"); xpt_print(periph->path, "Second device (%s " "device at scbus%d target %d lun %d) will " "not be wired\n", periph_name, pathid, target, lun); wired = false; } continue; } if (wired) break; /* * Don't allow the mere presence of any attributes of a device * means that it is for a wired down entry. Instead, insist that * one of the matching criteria from camperiphunit be present * for the device. */ i = 0; dname = periph_name; for (;;) { r = resource_find_dev(&i, dname, &dunit, NULL, NULL); if (r != 0) break; if (newunit != dunit) continue; if (resource_string_value(dname, dunit, "sn", &strval) == 0 || resource_int_value(dname, dunit, "lun", &val) == 0 || resource_int_value(dname, dunit, "target", &val) == 0 || resource_string_value(dname, dunit, "at", &strval) == 0) break; } if (r != 0) break; } return (newunit); } static u_int camperiphunit(struct periph_driver *p_drv, path_id_t pathid, target_id_t target, lun_id_t lun, const char *sn) { - bool wired; + bool wired = false; u_int unit; int i, val, dunit; const char *dname, *strval; char pathbuf[32], *periph_name; periph_name = p_drv->driver_name; snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid); unit = 0; i = 0; dname = periph_name; while (resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0) { wired = false; if (resource_string_value(dname, dunit, "at", &strval) == 0) { if (strcmp(strval, pathbuf) != 0) continue; wired = true; } if (resource_int_value(dname, dunit, "target", &val) == 0) { if (val != target) continue; wired = true; } if (resource_int_value(dname, dunit, "lun", &val) == 0) { if (val != lun) continue; wired = true; } if (resource_string_value(dname, dunit, "sn", &strval) == 0) { if (sn == NULL || strcmp(strval, sn) != 0) continue; wired = true; } if (wired) { unit = dunit; break; } } /* * Either start from 0 looking for the next unit or from * the unit number given in the resource config. This way, * if we have wildcard matches, we don't return the same * unit number twice. */ unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun); return (unit); } void cam_periph_invalidate(struct cam_periph *periph) { cam_periph_assert(periph, MA_OWNED); /* * We only tear down the device the first time a peripheral is * invalidated. */ if ((periph->flags & CAM_PERIPH_INVALID) != 0) return; CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n")); if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) { struct sbuf sb; char buffer[160]; sbuf_new(&sb, buffer, 160, SBUF_FIXEDLEN); xpt_denounce_periph_sbuf(periph, &sb); sbuf_finish(&sb); sbuf_putbuf(&sb); } periph->flags |= CAM_PERIPH_INVALID; periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; if (periph->periph_oninval != NULL) periph->periph_oninval(periph); cam_periph_release_locked(periph); } static void camperiphfree(struct cam_periph *periph) { struct periph_driver **p_drv; struct periph_driver *drv; cam_periph_assert(periph, MA_OWNED); KASSERT(periph->periph_allocating == 0, ("%s%d: freed while allocating", periph->periph_name, periph->unit_number)); for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) break; } if (*p_drv == NULL) { printf("camperiphfree: attempt to free non-existant periph\n"); return; } /* * Cache a pointer to the periph_driver structure. If a * periph_driver is added or removed from the array (see * periphdriver_register()) while we drop the toplogy lock * below, p_drv may change. This doesn't protect against this * particular periph_driver going away. That will require full * reference counting in the periph_driver infrastructure. */ drv = *p_drv; /* * We need to set this flag before dropping the topology lock, to * let anyone who is traversing the list that this peripheral is * about to be freed, and there will be no more reference count * checks. */ periph->flags |= CAM_PERIPH_FREE; /* * The peripheral destructor semantics dictate calling with only the * SIM mutex held. Since it might sleep, it should not be called * with the topology lock held. */ xpt_unlock_buses(); /* * We need to call the peripheral destructor prior to removing the * peripheral from the list. Otherwise, we risk running into a * scenario where the peripheral unit number may get reused * (because it has been removed from the list), but some resources * used by the peripheral are still hanging around. In particular, * the devfs nodes used by some peripherals like the pass(4) driver * aren't fully cleaned up until the destructor is run. If the * unit number is reused before the devfs instance is fully gone, * devfs will panic. */ if (periph->periph_dtor != NULL) periph->periph_dtor(periph); /* * The peripheral list is protected by the topology lock. We have to * remove the periph from the drv list before we call deferred_ac. The * AC_FOUND_DEVICE callback won't create a new periph if it's still there. */ xpt_lock_buses(); TAILQ_REMOVE(&drv->units, periph, unit_links); drv->generation++; xpt_remove_periph(periph); xpt_unlock_buses(); if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) xpt_print(periph->path, "Periph destroyed\n"); else CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { union ccb ccb; void *arg; memset(&ccb, 0, sizeof(ccb)); switch (periph->deferred_ac) { case AC_FOUND_DEVICE: ccb.ccb_h.func_code = XPT_GDEV_TYPE; xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); xpt_action(&ccb); arg = &ccb; break; case AC_PATH_REGISTERED: xpt_path_inq(&ccb.cpi, periph->path); arg = &ccb; break; default: arg = NULL; break; } periph->deferred_callback(NULL, periph->deferred_ac, periph->path, arg); } xpt_free_path(periph->path); free(periph, M_CAMPERIPH); xpt_lock_buses(); } /* * Map user virtual pointers into kernel virtual address space, so we can * access the memory. This is now a generic function that centralizes most * of the sanity checks on the data flags, if any. * This also only works for up to maxphys memory. Since we use * buffers to map stuff in and out, we're limited to the buffer size. */ int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo, u_int maxmap) { int numbufs, i; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; u_int32_t lengths[CAM_PERIPH_MAXMAPS]; u_int32_t dirs[CAM_PERIPH_MAXMAPS]; bzero(mapinfo, sizeof(*mapinfo)); if (maxmap == 0) maxmap = DFLTPHYS; /* traditional default */ else if (maxmap > maxphys) maxmap = maxphys; /* for safety */ switch(ccb->ccb_h.func_code) { case XPT_DEV_MATCH: if (ccb->cdm.match_buf_len == 0) { printf("cam_periph_mapmem: invalid match buffer " "length 0\n"); return(EINVAL); } if (ccb->cdm.pattern_buf_len > 0) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; lengths[0] = ccb->cdm.pattern_buf_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; lengths[1] = ccb->cdm.match_buf_len; dirs[1] = CAM_DIR_IN; numbufs = 2; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; lengths[0] = ccb->cdm.match_buf_len; dirs[0] = CAM_DIR_IN; numbufs = 1; } /* * This request will not go to the hardware, no reason * to be so strict. vmapbuf() is able to map up to maxphys. */ maxmap = maxphys; break; case XPT_SCSI_IO: case XPT_CONT_TARGET_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) return (EINVAL); data_ptrs[0] = &ccb->csio.data_ptr; lengths[0] = ccb->csio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_ATA_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) return (EINVAL); data_ptrs[0] = &ccb->ataio.data_ptr; lengths[0] = ccb->ataio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_MMC_IO: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return(0); /* Two mappings: one for cmd->data and one for cmd->data->data */ data_ptrs[0] = (unsigned char **)&ccb->mmcio.cmd.data; lengths[0] = sizeof(struct mmc_data *); dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; data_ptrs[1] = (unsigned char **)&ccb->mmcio.cmd.data->data; lengths[1] = ccb->mmcio.cmd.data->len; dirs[1] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 2; break; case XPT_SMP_IO: data_ptrs[0] = &ccb->smpio.smp_request; lengths[0] = ccb->smpio.smp_request_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = &ccb->smpio.smp_response; lengths[1] = ccb->smpio.smp_response_len; dirs[1] = CAM_DIR_IN; numbufs = 2; break; case XPT_NVME_IO: case XPT_NVME_ADMIN: if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) return (0); if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) return (EINVAL); data_ptrs[0] = &ccb->nvmeio.data_ptr; lengths[0] = ccb->nvmeio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_DEV_ADVINFO: if (ccb->cdai.bufsiz == 0) return (0); data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; lengths[0] = ccb->cdai.bufsiz; dirs[0] = CAM_DIR_IN; numbufs = 1; /* * This request will not go to the hardware, no reason * to be so strict. vmapbuf() is able to map up to maxphys. */ maxmap = maxphys; break; default: return(EINVAL); break; /* NOTREACHED */ } /* * Check the transfer length and permissions first, so we don't * have to unmap any previously mapped buffers. */ for (i = 0; i < numbufs; i++) { if (lengths[i] > maxmap) { printf("cam_periph_mapmem: attempt to map %lu bytes, " "which is greater than %lu\n", (long)(lengths[i]), (u_long)maxmap); return (E2BIG); } } /* * This keeps the kernel stack of current thread from getting * swapped. In low-memory situations where the kernel stack might * otherwise get swapped out, this holds it and allows the thread * to make progress and release the kernel mapped pages sooner. * * XXX KDM should I use P_NOSWAP instead? */ PHOLD(curproc); for (i = 0; i < numbufs; i++) { /* Save the user's data address. */ mapinfo->orig[i] = *data_ptrs[i]; /* * For small buffers use malloc+copyin/copyout instead of * mapping to KVA to avoid expensive TLB shootdowns. For * small allocations malloc is backed by UMA, and so much * cheaper on SMP systems. */ if (lengths[i] <= periph_mapmem_thresh && ccb->ccb_h.func_code != XPT_MMC_IO) { *data_ptrs[i] = malloc(lengths[i], M_CAMPERIPH, M_WAITOK); if (dirs[i] != CAM_DIR_IN) { if (copyin(mapinfo->orig[i], *data_ptrs[i], lengths[i]) != 0) { free(*data_ptrs[i], M_CAMPERIPH); *data_ptrs[i] = mapinfo->orig[i]; goto fail; } } else bzero(*data_ptrs[i], lengths[i]); continue; } /* * Get the buffer. */ mapinfo->bp[i] = uma_zalloc(pbuf_zone, M_WAITOK); /* set the direction */ mapinfo->bp[i]->b_iocmd = (dirs[i] == CAM_DIR_OUT) ? BIO_WRITE : BIO_READ; /* Map the buffer into kernel memory. */ if (vmapbuf(mapinfo->bp[i], *data_ptrs[i], lengths[i], 1) < 0) { uma_zfree(pbuf_zone, mapinfo->bp[i]); goto fail; } /* set our pointer to the new mapped area */ *data_ptrs[i] = mapinfo->bp[i]->b_data; } /* * Now that we've gotten this far, change ownership to the kernel * of the buffers so that we don't run afoul of returning to user * space with locks (on the buffer) held. */ for (i = 0; i < numbufs; i++) { if (mapinfo->bp[i]) BUF_KERNPROC(mapinfo->bp[i]); } mapinfo->num_bufs_used = numbufs; return(0); fail: for (i--; i >= 0; i--) { if (mapinfo->bp[i]) { vunmapbuf(mapinfo->bp[i]); uma_zfree(pbuf_zone, mapinfo->bp[i]); } else free(*data_ptrs[i], M_CAMPERIPH); *data_ptrs[i] = mapinfo->orig[i]; } PRELE(curproc); return(EACCES); } /* * Unmap memory segments mapped into kernel virtual address space by * cam_periph_mapmem(). */ void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) { int numbufs, i; u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; u_int32_t lengths[CAM_PERIPH_MAXMAPS]; u_int32_t dirs[CAM_PERIPH_MAXMAPS]; if (mapinfo->num_bufs_used <= 0) { /* nothing to free and the process wasn't held. */ return; } switch (ccb->ccb_h.func_code) { case XPT_DEV_MATCH: if (ccb->cdm.pattern_buf_len > 0) { data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; lengths[0] = ccb->cdm.pattern_buf_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; lengths[1] = ccb->cdm.match_buf_len; dirs[1] = CAM_DIR_IN; numbufs = 2; } else { data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; lengths[0] = ccb->cdm.match_buf_len; dirs[0] = CAM_DIR_IN; numbufs = 1; } break; case XPT_SCSI_IO: case XPT_CONT_TARGET_IO: data_ptrs[0] = &ccb->csio.data_ptr; lengths[0] = ccb->csio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_ATA_IO: data_ptrs[0] = &ccb->ataio.data_ptr; lengths[0] = ccb->ataio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_MMC_IO: data_ptrs[0] = (u_int8_t **)&ccb->mmcio.cmd.data; lengths[0] = sizeof(struct mmc_data *); dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; data_ptrs[1] = (u_int8_t **)&ccb->mmcio.cmd.data->data; lengths[1] = ccb->mmcio.cmd.data->len; dirs[1] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 2; break; case XPT_SMP_IO: data_ptrs[0] = &ccb->smpio.smp_request; lengths[0] = ccb->smpio.smp_request_len; dirs[0] = CAM_DIR_OUT; data_ptrs[1] = &ccb->smpio.smp_response; lengths[1] = ccb->smpio.smp_response_len; dirs[1] = CAM_DIR_IN; numbufs = 2; break; case XPT_NVME_IO: case XPT_NVME_ADMIN: data_ptrs[0] = &ccb->nvmeio.data_ptr; lengths[0] = ccb->nvmeio.dxfer_len; dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; numbufs = 1; break; case XPT_DEV_ADVINFO: data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; lengths[0] = ccb->cdai.bufsiz; dirs[0] = CAM_DIR_IN; numbufs = 1; break; default: /* allow ourselves to be swapped once again */ PRELE(curproc); return; break; /* NOTREACHED */ } for (i = 0; i < numbufs; i++) { if (mapinfo->bp[i]) { /* unmap the buffer */ vunmapbuf(mapinfo->bp[i]); /* release the buffer */ uma_zfree(pbuf_zone, mapinfo->bp[i]); } else { if (dirs[i] != CAM_DIR_OUT) { copyout(*data_ptrs[i], mapinfo->orig[i], lengths[i]); } free(*data_ptrs[i], M_CAMPERIPH); } /* Set the user's pointer back to the original value */ *data_ptrs[i] = mapinfo->orig[i]; } /* allow ourselves to be swapped once again */ PRELE(curproc); } int cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)) { union ccb *ccb; int error; int found; error = found = 0; switch(cmd){ case CAMGETPASSTHRU: ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); ccb->ccb_h.func_code = XPT_GDEVLIST; /* * Basically, the point of this is that we go through * getting the list of devices, until we find a passthrough * device. In the current version of the CAM code, the * only way to determine what type of device we're dealing * with is by its name. */ while (found == 0) { ccb->cgdl.index = 0; ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { /* we want the next device in the list */ xpt_action(ccb); if (strncmp(ccb->cgdl.periph_name, "pass", 4) == 0){ found = 1; break; } } if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && (found == 0)) { ccb->cgdl.periph_name[0] = '\0'; ccb->cgdl.unit_number = 0; break; } } /* copy the result back out */ bcopy(ccb, addr, sizeof(union ccb)); /* and release the ccb */ xpt_release_ccb(ccb); break; default: error = ENOTTY; break; } return(error); } static void cam_periph_done_panic(struct cam_periph *periph, union ccb *done_ccb) { panic("%s: already done with ccb %p", __func__, done_ccb); } static void cam_periph_done(struct cam_periph *periph, union ccb *done_ccb) { /* Caller will release the CCB */ xpt_path_assert(done_ccb->ccb_h.path, MA_OWNED); done_ccb->ccb_h.cbfcnp = cam_periph_done_panic; wakeup(&done_ccb->ccb_h.cbfcnp); } static void cam_periph_ccbwait(union ccb *ccb) { if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) != 0) { while (ccb->ccb_h.cbfcnp != cam_periph_done_panic) xpt_path_sleep(ccb->ccb_h.path, &ccb->ccb_h.cbfcnp, PRIBIO, "cbwait", 0); } KASSERT(ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX && (ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG, ("%s: proceeding with incomplete ccb: ccb=%p, func_code=%#x, " "status=%#x, index=%d", __func__, ccb, ccb->ccb_h.func_code, ccb->ccb_h.status, ccb->ccb_h.pinfo.index)); } /* * Dispatch a CCB and wait for it to complete. If the CCB has set a * callback function (ccb->ccb_h.cbfcnp), it will be overwritten and lost. */ int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds) { struct bintime *starttime; struct bintime ltime; int error; bool must_poll; uint32_t timeout = 1; starttime = NULL; xpt_path_assert(ccb->ccb_h.path, MA_OWNED); KASSERT((ccb->ccb_h.flags & CAM_UNLOCKED) == 0, ("%s: ccb=%p, func_code=%#x, flags=%#x", __func__, ccb, ccb->ccb_h.func_code, ccb->ccb_h.flags)); /* * If the user has supplied a stats structure, and if we understand * this particular type of ccb, record the transaction start. */ if (ds != NULL && (ccb->ccb_h.func_code == XPT_SCSI_IO || ccb->ccb_h.func_code == XPT_ATA_IO || ccb->ccb_h.func_code == XPT_NVME_IO)) { starttime = <ime; binuptime(starttime); devstat_start_transaction(ds, starttime); } /* * We must poll the I/O while we're dumping. The scheduler is normally * stopped for dumping, except when we call doadump from ddb. While the * scheduler is running in this case, we still need to poll the I/O to * avoid sleeping waiting for the ccb to complete. * * A panic triggered dump stops the scheduler, any callback from the * shutdown_post_sync event will run with the scheduler stopped, but * before we're officially dumping. To avoid hanging in adashutdown * initiated commands (or other similar situations), we have to test for * either SCHEDULER_STOPPED() here as well. * * To avoid locking problems, dumping/polling callers must call * without a periph lock held. */ must_poll = dumping || SCHEDULER_STOPPED(); ccb->ccb_h.cbfcnp = cam_periph_done; /* * If we're polling, then we need to ensure that we have ample resources * in the periph. cam_periph_error can reschedule the ccb by calling * xpt_action and returning ERESTART, so we have to effect the polling * in the do loop below. */ if (must_poll) { if (cam_sim_pollable(ccb->ccb_h.path->bus->sim)) timeout = xpt_poll_setup(ccb); else timeout = 0; } if (timeout == 0) { ccb->ccb_h.status = CAM_RESRC_UNAVAIL; error = EBUSY; } else { xpt_action(ccb); do { if (must_poll) { xpt_pollwait(ccb, timeout); timeout = ccb->ccb_h.timeout * 10; } else { cam_periph_ccbwait(ccb); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) error = 0; else if (error_routine != NULL) { ccb->ccb_h.cbfcnp = cam_periph_done; error = (*error_routine)(ccb, camflags, sense_flags); } else error = 0; } while (error == ERESTART); } if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { cam_release_devq(ccb->ccb_h.path, /* relsim_flags */0, /* openings */0, /* timeout */0, /* getcount_only */ FALSE); ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } if (ds != NULL) { uint32_t bytes; devstat_tag_type tag; bool valid = true; if (ccb->ccb_h.func_code == XPT_SCSI_IO) { bytes = ccb->csio.dxfer_len - ccb->csio.resid; tag = (devstat_tag_type)(ccb->csio.tag_action & 0x3); } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { bytes = ccb->ataio.dxfer_len - ccb->ataio.resid; tag = (devstat_tag_type)0; } else if (ccb->ccb_h.func_code == XPT_NVME_IO) { bytes = ccb->nvmeio.dxfer_len; /* NB: resid no possible */ tag = (devstat_tag_type)0; } else { valid = false; } if (valid) devstat_end_transaction(ds, bytes, tag, ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ? DEVSTAT_NO_DATA : (ccb->ccb_h.flags & CAM_DIR_OUT) ? DEVSTAT_WRITE : DEVSTAT_READ, NULL, starttime); } return(error); } void cam_freeze_devq(struct cam_path *path) { struct ccb_hdr ccb_h; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_freeze_devq\n")); memset(&ccb_h, 0, sizeof(ccb_h)); xpt_setup_ccb(&ccb_h, path, /*priority*/1); ccb_h.func_code = XPT_NOOP; ccb_h.flags = CAM_DEV_QFREEZE; xpt_action((union ccb *)&ccb_h); } u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t openings, u_int32_t arg, int getcount_only) { struct ccb_relsim crs; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_release_devq(%u, %u, %u, %d)\n", relsim_flags, openings, arg, getcount_only)); memset(&crs, 0, sizeof(crs)); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; crs.release_flags = relsim_flags; crs.openings = openings; crs.release_timeout = arg; xpt_action((union ccb *)&crs); return (crs.qfrozen_cnt); } #define saved_ccb_ptr ppriv_ptr0 static void camperiphdone(struct cam_periph *periph, union ccb *done_ccb) { union ccb *saved_ccb; cam_status status; struct scsi_start_stop_unit *scsi_cmd; int error = 0, error_code, sense_key, asc, ascq; u_int16_t done_flags; scsi_cmd = (struct scsi_start_stop_unit *) &done_ccb->csio.cdb_io.cdb_bytes; status = done_ccb->ccb_h.status; if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (scsi_extract_sense_ccb(done_ccb, &error_code, &sense_key, &asc, &ascq)) { /* * If the error is "invalid field in CDB", * and the load/eject flag is set, turn the * flag off and try again. This is just in * case the drive in question barfs on the * load eject flag. The CAM code should set * the load/eject flag by default for * removable media. */ if ((scsi_cmd->opcode == START_STOP_UNIT) && ((scsi_cmd->how & SSS_LOEJ) != 0) && (asc == 0x24) && (ascq == 0x00)) { scsi_cmd->how &= ~SSS_LOEJ; if (status & CAM_DEV_QFRZN) { cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } xpt_action(done_ccb); goto out; } } error = cam_periph_error(done_ccb, 0, SF_RETRY_UA | SF_NO_PRINT); if (error == ERESTART) goto out; if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) { cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } } else { /* * If we have successfully taken a device from the not * ready to ready state, re-scan the device and re-get * the inquiry information. Many devices (mostly disks) * don't properly report their inquiry information unless * they are spun up. */ if (scsi_cmd->opcode == START_STOP_UNIT) xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL); } /* If we tried long wait and still failed, remember that. */ if ((periph->flags & CAM_PERIPH_RECOVERY_WAIT) && (done_ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY)) { periph->flags &= ~CAM_PERIPH_RECOVERY_WAIT; if (error != 0 && done_ccb->ccb_h.retry_count == 0) periph->flags |= CAM_PERIPH_RECOVERY_WAIT_FAILED; } /* * After recovery action(s) completed, return to the original CCB. * If the recovery CCB has failed, considering its own possible * retries and recovery, assume we are back in state where we have * been originally, but without recovery hopes left. In such case, * after the final attempt below, we cancel any further retries, * blocking by that also any new recovery attempts for this CCB, * and the result will be the final one returned to the CCB owher. */ /* * Copy the CCB back, preserving the alloc_flags field. Things * will crash horribly if the CCBs are not of the same size. */ saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr; KASSERT(saved_ccb->ccb_h.func_code == XPT_SCSI_IO, ("%s: saved_ccb func_code %#x != XPT_SCSI_IO", __func__, saved_ccb->ccb_h.func_code)); KASSERT(done_ccb->ccb_h.func_code == XPT_SCSI_IO, ("%s: done_ccb func_code %#x != XPT_SCSI_IO", __func__, done_ccb->ccb_h.func_code)); done_flags = done_ccb->ccb_h.alloc_flags; bcopy(saved_ccb, done_ccb, sizeof(struct ccb_scsiio)); done_ccb->ccb_h.alloc_flags = done_flags; xpt_free_ccb(saved_ccb); if (done_ccb->ccb_h.cbfcnp != camperiphdone) periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; if (error != 0) done_ccb->ccb_h.retry_count = 0; xpt_action(done_ccb); out: /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); } /* * Generic Async Event handler. Peripheral drivers usually * filter out the events that require personal attention, * and leave the rest to this function. */ void cam_periph_async(struct cam_periph *periph, u_int32_t code, struct cam_path *path, void *arg) { switch (code) { case AC_LOST_DEVICE: cam_periph_invalidate(periph); break; default: break; } } void cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) { struct ccb_getdevstats cgds; memset(&cgds, 0, sizeof(cgds)); xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cgds.ccb_h.func_code = XPT_GDEV_STATS; xpt_action((union ccb *)&cgds); cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); } void cam_periph_freeze_after_event(struct cam_periph *periph, struct timeval* event_time, u_int duration_ms) { struct timeval delta; struct timeval duration_tv; if (!timevalisset(event_time)) return; microtime(&delta); timevalsub(&delta, event_time); duration_tv.tv_sec = duration_ms / 1000; duration_tv.tv_usec = (duration_ms % 1000) * 1000; if (timevalcmp(&delta, &duration_tv, <)) { timevalsub(&duration_tv, &delta); duration_ms = duration_tv.tv_sec * 1000; duration_ms += duration_tv.tv_usec / 1000; cam_freeze_devq(periph->path); cam_release_devq(periph->path, RELSIM_RELEASE_AFTER_TIMEOUT, /*reduction*/0, /*timeout*/duration_ms, /*getcount_only*/0); } } static int camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string) { struct cam_periph *periph; int error; switch (ccb->csio.scsi_status) { case SCSI_STATUS_OK: case SCSI_STATUS_COND_MET: case SCSI_STATUS_INTERMED: case SCSI_STATUS_INTERMED_COND_MET: error = 0; break; case SCSI_STATUS_CMD_TERMINATED: case SCSI_STATUS_CHECK_COND: error = camperiphscsisenseerror(ccb, orig_ccb, camflags, sense_flags, openings, relsim_flags, timeout, action, action_string); break; case SCSI_STATUS_QUEUE_FULL: { /* no decrement */ struct ccb_getdevstats cgds; /* * First off, find out what the current * transaction counts are. */ memset(&cgds, 0, sizeof(cgds)); xpt_setup_ccb(&cgds.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgds.ccb_h.func_code = XPT_GDEV_STATS; xpt_action((union ccb *)&cgds); /* * If we were the only transaction active, treat * the QUEUE FULL as if it were a BUSY condition. */ if (cgds.dev_active != 0) { int total_openings; /* * Reduce the number of openings to * be 1 less than the amount it took * to get a queue full bounded by the * minimum allowed tag count for this * device. */ total_openings = cgds.dev_active + cgds.dev_openings; *openings = cgds.dev_active; if (*openings < cgds.mintags) *openings = cgds.mintags; if (*openings < total_openings) *relsim_flags = RELSIM_ADJUST_OPENINGS; else { /* * Some devices report queue full for * temporary resource shortages. For * this reason, we allow a minimum * tag count to be entered via a * quirk entry to prevent the queue * count on these devices from falling * to a pessimisticly low value. We * still wait for the next successful * completion, however, before queueing * more transactions to the device. */ *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT; } *timeout = 0; error = ERESTART; *action &= ~SSQ_PRINT_SENSE; break; } /* FALLTHROUGH */ } case SCSI_STATUS_BUSY: /* * Restart the queue after either another * command completes or a 1 second timeout. */ periph = xpt_path_periph(ccb->ccb_h.path); if (periph->flags & CAM_PERIPH_INVALID) { error = EIO; *action_string = "Periph was invalidated"; } else if ((sense_flags & SF_RETRY_BUSY) != 0 || ccb->ccb_h.retry_count > 0) { if ((sense_flags & SF_RETRY_BUSY) == 0) ccb->ccb_h.retry_count--; error = ERESTART; *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT | RELSIM_RELEASE_AFTER_CMDCMPLT; *timeout = 1000; } else { error = EIO; *action_string = "Retries exhausted"; } break; case SCSI_STATUS_RESERV_CONFLICT: default: error = EIO; break; } return (error); } static int camperiphscsisenseerror(union ccb *ccb, union ccb **orig, cam_flags camflags, u_int32_t sense_flags, int *openings, u_int32_t *relsim_flags, u_int32_t *timeout, u_int32_t *action, const char **action_string) { struct cam_periph *periph; union ccb *orig_ccb = ccb; int error, recoveryccb; u_int16_t flags; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (ccb->ccb_h.func_code == XPT_SCSI_IO && ccb->csio.bio != NULL) biotrack(ccb->csio.bio, __func__); #endif periph = xpt_path_periph(ccb->ccb_h.path); recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone); if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) { /* * If error recovery is already in progress, don't attempt * to process this error, but requeue it unconditionally * and attempt to process it once error recovery has * completed. This failed command is probably related to * the error that caused the currently active error recovery * action so our current recovery efforts should also * address this command. Be aware that the error recovery * code assumes that only one recovery action is in progress * on a particular peripheral instance at any given time * (e.g. only one saved CCB for error recovery) so it is * imperitive that we don't violate this assumption. */ error = ERESTART; *action &= ~SSQ_PRINT_SENSE; } else { scsi_sense_action err_action; struct ccb_getdev cgd; /* * Grab the inquiry data for this device. */ memset(&cgd, 0, sizeof(cgd)); xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); err_action = scsi_error_action(&ccb->csio, &cgd.inq_data, sense_flags); error = err_action & SS_ERRMASK; /* * Do not autostart sequential access devices * to avoid unexpected tape loading. */ if ((err_action & SS_MASK) == SS_START && SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) { *action_string = "Will not autostart a " "sequential access device"; goto sense_error_done; } /* * Avoid recovery recursion if recovery action is the same. */ if ((err_action & SS_MASK) >= SS_START && recoveryccb) { if (((err_action & SS_MASK) == SS_START && ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) || ((err_action & SS_MASK) == SS_TUR && (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) { err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO; *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; *timeout = 500; } } /* * If the recovery action will consume a retry, * make sure we actually have retries available. */ if ((err_action & SSQ_DECREMENT_COUNT) != 0) { if (ccb->ccb_h.retry_count > 0 && (periph->flags & CAM_PERIPH_INVALID) == 0) ccb->ccb_h.retry_count--; else { *action_string = "Retries exhausted"; goto sense_error_done; } } if ((err_action & SS_MASK) >= SS_START) { /* * Do common portions of commands that * use recovery CCBs. */ orig_ccb = xpt_alloc_ccb_nowait(); if (orig_ccb == NULL) { *action_string = "Can't allocate recovery CCB"; goto sense_error_done; } /* * Clear freeze flag for original request here, as * this freeze will be dropped as part of ERESTART. */ ccb->ccb_h.status &= ~CAM_DEV_QFRZN; KASSERT(ccb->ccb_h.func_code == XPT_SCSI_IO, ("%s: ccb func_code %#x != XPT_SCSI_IO", __func__, ccb->ccb_h.func_code)); flags = orig_ccb->ccb_h.alloc_flags; bcopy(ccb, orig_ccb, sizeof(struct ccb_scsiio)); orig_ccb->ccb_h.alloc_flags = flags; } switch (err_action & SS_MASK) { case SS_NOP: *action_string = "No recovery action needed"; error = 0; break; case SS_RETRY: *action_string = "Retrying command (per sense data)"; error = ERESTART; break; case SS_FAIL: *action_string = "Unretryable error"; break; case SS_START: { int le; /* * Send a start unit command to the device, and * then retry the command. */ *action_string = "Attempting to start unit"; periph->flags |= CAM_PERIPH_RECOVERY_INPROG; /* * Check for removable media and set * load/eject flag appropriately. */ if (SID_IS_REMOVABLE(&cgd.inq_data)) le = TRUE; else le = FALSE; scsi_start_stop(&ccb->csio, /*retries*/1, camperiphdone, MSG_SIMPLE_Q_TAG, /*start*/TRUE, /*load/eject*/le, /*immediate*/FALSE, SSD_FULL_SIZE, /*timeout*/50000); break; } case SS_TUR: { /* * Send a Test Unit Ready to the device. * If the 'many' flag is set, we send 120 * test unit ready commands, one every half * second. Otherwise, we just send one TUR. * We only want to do this if the retry * count has not been exhausted. */ int retries; if ((err_action & SSQ_MANY) != 0 && (periph->flags & CAM_PERIPH_RECOVERY_WAIT_FAILED) == 0) { periph->flags |= CAM_PERIPH_RECOVERY_WAIT; *action_string = "Polling device for readiness"; retries = 120; } else { *action_string = "Testing device for readiness"; retries = 1; } periph->flags |= CAM_PERIPH_RECOVERY_INPROG; scsi_test_unit_ready(&ccb->csio, retries, camperiphdone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/5000); /* * Accomplish our 500ms delay by deferring * the release of our device queue appropriately. */ *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; *timeout = 500; break; } default: panic("Unhandled error action %x", err_action); } if ((err_action & SS_MASK) >= SS_START) { /* * Drop the priority, so that the recovery * CCB is the first to execute. Freeze the queue * after this command is sent so that we can * restore the old csio and have it queued in * the proper order before we release normal * transactions to the device. */ ccb->ccb_h.pinfo.priority--; ccb->ccb_h.flags |= CAM_DEV_QFREEZE; ccb->ccb_h.saved_ccb_ptr = orig_ccb; error = ERESTART; *orig = orig_ccb; } sense_error_done: *action = err_action; } return (error); } /* * Generic error handler. Peripheral drivers usually filter * out the errors that they handle in a unique manner, then * call this function. */ int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags) { struct cam_path *newpath; union ccb *orig_ccb, *scan_ccb; struct cam_periph *periph; const char *action_string; cam_status status; int frozen, error, openings, devctl_err; u_int32_t action, relsim_flags, timeout; action = SSQ_PRINT_SENSE; periph = xpt_path_periph(ccb->ccb_h.path); action_string = NULL; status = ccb->ccb_h.status; frozen = (status & CAM_DEV_QFRZN) != 0; status &= CAM_STATUS_MASK; devctl_err = openings = relsim_flags = timeout = 0; orig_ccb = ccb; /* Filter the errors that should be reported via devctl */ switch (ccb->ccb_h.status & CAM_STATUS_MASK) { case CAM_CMD_TIMEOUT: case CAM_REQ_ABORTED: case CAM_REQ_CMP_ERR: case CAM_REQ_TERMIO: case CAM_UNREC_HBA_ERROR: case CAM_DATA_RUN_ERR: case CAM_SCSI_STATUS_ERROR: case CAM_ATA_STATUS_ERROR: case CAM_SMP_STATUS_ERROR: devctl_err++; break; default: break; } switch (status) { case CAM_REQ_CMP: error = 0; action &= ~SSQ_PRINT_SENSE; break; case CAM_SCSI_STATUS_ERROR: error = camperiphscsistatuserror(ccb, &orig_ccb, camflags, sense_flags, &openings, &relsim_flags, &timeout, &action, &action_string); break; case CAM_AUTOSENSE_FAIL: error = EIO; /* we have to kill the command */ break; case CAM_UA_ABORT: case CAM_UA_TERMIO: case CAM_MSG_REJECT_REC: /* XXX Don't know that these are correct */ error = EIO; break; case CAM_SEL_TIMEOUT: if ((camflags & CAM_RETRY_SELTO) != 0) { if (ccb->ccb_h.retry_count > 0 && (periph->flags & CAM_PERIPH_INVALID) == 0) { ccb->ccb_h.retry_count--; error = ERESTART; /* * Wait a bit to give the device * time to recover before we try again. */ relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; timeout = periph_selto_delay; break; } action_string = "Retries exhausted"; } /* FALLTHROUGH */ case CAM_DEV_NOT_THERE: error = ENXIO; action = SSQ_LOST; break; case CAM_REQ_INVALID: case CAM_PATH_INVALID: case CAM_NO_HBA: case CAM_PROVIDE_FAIL: case CAM_REQ_TOO_BIG: case CAM_LUN_INVALID: case CAM_TID_INVALID: case CAM_FUNC_NOTAVAIL: error = EINVAL; break; case CAM_SCSI_BUS_RESET: case CAM_BDR_SENT: /* * Commands that repeatedly timeout and cause these * kinds of error recovery actions, should return * CAM_CMD_TIMEOUT, which allows us to safely assume * that this command was an innocent bystander to * these events and should be unconditionally * retried. */ case CAM_REQUEUE_REQ: /* Unconditional requeue if device is still there */ if (periph->flags & CAM_PERIPH_INVALID) { action_string = "Periph was invalidated"; error = EIO; } else if (sense_flags & SF_NO_RETRY) { error = EIO; action_string = "Retry was blocked"; } else { error = ERESTART; action &= ~SSQ_PRINT_SENSE; } break; case CAM_RESRC_UNAVAIL: /* Wait a bit for the resource shortage to abate. */ timeout = periph_noresrc_delay; /* FALLTHROUGH */ case CAM_BUSY: if (timeout == 0) { /* Wait a bit for the busy condition to abate. */ timeout = periph_busy_delay; } relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; /* FALLTHROUGH */ case CAM_ATA_STATUS_ERROR: case CAM_REQ_CMP_ERR: case CAM_CMD_TIMEOUT: case CAM_UNEXP_BUSFREE: case CAM_UNCOR_PARITY: case CAM_DATA_RUN_ERR: default: if (periph->flags & CAM_PERIPH_INVALID) { error = EIO; action_string = "Periph was invalidated"; } else if (ccb->ccb_h.retry_count == 0) { error = EIO; action_string = "Retries exhausted"; } else if (sense_flags & SF_NO_RETRY) { error = EIO; action_string = "Retry was blocked"; } else { ccb->ccb_h.retry_count--; error = ERESTART; } break; } if ((sense_flags & SF_PRINT_ALWAYS) || CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO)) action |= SSQ_PRINT_SENSE; else if (sense_flags & SF_NO_PRINT) action &= ~SSQ_PRINT_SENSE; if ((action & SSQ_PRINT_SENSE) != 0) cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL); if (error != 0 && (action & SSQ_PRINT_SENSE) != 0) { if (error != ERESTART) { if (action_string == NULL) action_string = "Unretryable error"; xpt_print(ccb->ccb_h.path, "Error %d, %s\n", error, action_string); } else if (action_string != NULL) xpt_print(ccb->ccb_h.path, "%s\n", action_string); else { xpt_print(ccb->ccb_h.path, "Retrying command, %d more tries remain\n", ccb->ccb_h.retry_count); } } if (devctl_err && (error != 0 || (action & SSQ_PRINT_SENSE) != 0)) cam_periph_devctl_notify(orig_ccb); if ((action & SSQ_LOST) != 0) { lun_id_t lun_id; /* * For a selection timeout, we consider all of the LUNs on * the target to be gone. If the status is CAM_DEV_NOT_THERE, * then we only get rid of the device(s) specified by the * path in the original CCB. */ if (status == CAM_SEL_TIMEOUT) lun_id = CAM_LUN_WILDCARD; else lun_id = xpt_path_lun_id(ccb->ccb_h.path); /* Should we do more if we can't create the path?? */ if (xpt_create_path(&newpath, periph, xpt_path_path_id(ccb->ccb_h.path), xpt_path_target_id(ccb->ccb_h.path), lun_id) == CAM_REQ_CMP) { /* * Let peripheral drivers know that this * device has gone away. */ xpt_async(AC_LOST_DEVICE, newpath, NULL); xpt_free_path(newpath); } } /* Broadcast UNIT ATTENTIONs to all periphs. */ if ((action & SSQ_UA) != 0) xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb); /* Rescan target on "Reported LUNs data has changed" */ if ((action & SSQ_RESCAN) != 0) { if (xpt_create_path(&newpath, NULL, xpt_path_path_id(ccb->ccb_h.path), xpt_path_target_id(ccb->ccb_h.path), CAM_LUN_WILDCARD) == CAM_REQ_CMP) { scan_ccb = xpt_alloc_ccb_nowait(); if (scan_ccb != NULL) { scan_ccb->ccb_h.path = newpath; scan_ccb->ccb_h.func_code = XPT_SCAN_TGT; scan_ccb->crcn.flags = 0; xpt_rescan(scan_ccb); } else { xpt_print(newpath, "Can't allocate CCB to rescan target\n"); xpt_free_path(newpath); } } } /* Attempt a retry */ if (error == ERESTART || error == 0) { if (frozen != 0) ccb->ccb_h.status &= ~CAM_DEV_QFRZN; if (error == ERESTART) xpt_action(ccb); if (frozen != 0) cam_release_devq(ccb->ccb_h.path, relsim_flags, openings, timeout, /*getcount_only*/0); } return (error); } #define CAM_PERIPH_DEVD_MSG_SIZE 256 static void cam_periph_devctl_notify(union ccb *ccb) { struct cam_periph *periph; struct ccb_getdev *cgd; struct sbuf sb; int serr, sk, asc, ascq; char *sbmsg, *type; sbmsg = malloc(CAM_PERIPH_DEVD_MSG_SIZE, M_CAMPERIPH, M_NOWAIT); if (sbmsg == NULL) return; sbuf_new(&sb, sbmsg, CAM_PERIPH_DEVD_MSG_SIZE, SBUF_FIXEDLEN); periph = xpt_path_periph(ccb->ccb_h.path); sbuf_printf(&sb, "device=%s%d ", periph->periph_name, periph->unit_number); sbuf_printf(&sb, "serial=\""); if ((cgd = (struct ccb_getdev *)xpt_alloc_ccb_nowait()) != NULL) { xpt_setup_ccb(&cgd->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgd->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)cgd); if (cgd->ccb_h.status == CAM_REQ_CMP) sbuf_bcat(&sb, cgd->serial_num, cgd->serial_num_len); xpt_free_ccb((union ccb *)cgd); } sbuf_printf(&sb, "\" "); sbuf_printf(&sb, "cam_status=\"0x%x\" ", ccb->ccb_h.status); switch (ccb->ccb_h.status & CAM_STATUS_MASK) { case CAM_CMD_TIMEOUT: sbuf_printf(&sb, "timeout=%d ", ccb->ccb_h.timeout); type = "timeout"; break; case CAM_SCSI_STATUS_ERROR: sbuf_printf(&sb, "scsi_status=%d ", ccb->csio.scsi_status); if (scsi_extract_sense_ccb(ccb, &serr, &sk, &asc, &ascq)) sbuf_printf(&sb, "scsi_sense=\"%02x %02x %02x %02x\" ", serr, sk, asc, ascq); type = "error"; break; case CAM_ATA_STATUS_ERROR: sbuf_printf(&sb, "RES=\""); ata_res_sbuf(&ccb->ataio.res, &sb); sbuf_printf(&sb, "\" "); type = "error"; break; default: type = "error"; break; } if (ccb->ccb_h.func_code == XPT_SCSI_IO) { sbuf_printf(&sb, "CDB=\""); scsi_cdb_sbuf(scsiio_cdb_ptr(&ccb->csio), &sb); sbuf_printf(&sb, "\" "); } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { sbuf_printf(&sb, "ACB=\""); ata_cmd_sbuf(&ccb->ataio.cmd, &sb); sbuf_printf(&sb, "\" "); } if (sbuf_finish(&sb) == 0) devctl_notify("CAM", "periph", type, sbuf_data(&sb)); sbuf_delete(&sb); free(sbmsg, M_CAMPERIPH); } /* * Sysctl to force an invalidation of the drive right now. Can be * called with CTLFLAG_MPSAFE since we take periph lock. */ int cam_periph_invalidate_sysctl(SYSCTL_HANDLER_ARGS) { struct cam_periph *periph; int error, value; periph = arg1; value = 0; error = sysctl_handle_int(oidp, &value, 0, req); if (error != 0 || req->newptr == NULL || value != 1) return (error); cam_periph_lock(periph); cam_periph_invalidate(periph); cam_periph_unlock(periph); return (0); }